diff options
Diffstat (limited to 'drivers/mfd/sec-core.c')
| -rw-r--r-- | drivers/mfd/sec-core.c | 73 |
1 files changed, 68 insertions, 5 deletions
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index d206a3e8fe87..989076d6cb83 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -103,12 +103,9 @@ static const struct mfd_cell s2mpa01_devs[] = { }; static const struct mfd_cell s2mpu02_devs[] = { - { .name = "s2mpu02-pmic", }, - { .name = "s2mpu02-rtc", }, { - .name = "s2mpu02-clk", - .of_compatible = "samsung,s2mpu02-clk", - } + .name = "s2mpu02-pmic", + }, }; #ifdef CONFIG_OF @@ -253,6 +250,38 @@ static const struct regmap_config s5m8767_regmap_config = { .cache_type = REGCACHE_FLAT, }; +static void sec_pmic_dump_rev(struct sec_pmic_dev *sec_pmic) +{ + unsigned int val; + + /* For each device type, the REG_ID is always the first register */ + if (!regmap_read(sec_pmic->regmap_pmic, S2MPS11_REG_ID, &val)) + dev_dbg(sec_pmic->dev, "Revision: 0x%x\n", val); +} + +static void sec_pmic_configure(struct sec_pmic_dev *sec_pmic) +{ + int err; + + if (sec_pmic->device_type != S2MPS13X) + return; + + if (sec_pmic->pdata->disable_wrstbi) { + /* + * If WRSTBI pin is pulled down this feature must be disabled + * because each Suspend to RAM will trigger buck voltage reset + * to default values. + */ + err = regmap_update_bits(sec_pmic->regmap_pmic, + S2MPS13_REG_WRSTBI, + S2MPS13_REG_WRSTBI_MASK, 0x0); + if (err) + dev_warn(sec_pmic->dev, + "Cannot initialize WRSTBI config: %d\n", + err); + } +} + #ifdef CONFIG_OF /* * Only the common platform data elements for s5m8767 are parsed here from the @@ -278,6 +307,10 @@ static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata( * not parsed here. */ + pd->manual_poweroff = of_property_read_bool(dev->of_node, + "samsung,s2mps11-acokb-ground"); + pd->disable_wrstbi = of_property_read_bool(dev->of_node, + "samsung,s2mps11-wrstbi-ground"); return pd; } #else @@ -423,6 +456,8 @@ static int sec_pmic_probe(struct i2c_client *i2c, goto err_mfd; device_init_wakeup(sec_pmic->dev, sec_pmic->wakeup); + sec_pmic_configure(sec_pmic); + sec_pmic_dump_rev(sec_pmic); return ret; @@ -440,6 +475,33 @@ static int sec_pmic_remove(struct i2c_client *i2c) return 0; } +static void sec_pmic_shutdown(struct i2c_client *i2c) +{ + struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c); + unsigned int reg, mask; + + if (!sec_pmic->pdata->manual_poweroff) + return; + + switch (sec_pmic->device_type) { + case S2MPS11X: + reg = S2MPS11_REG_CTRL1; + mask = S2MPS11_CTRL1_PWRHOLD_MASK; + break; + default: + /* + * Currently only one board with S2MPS11 needs this, so just + * ignore the rest. + */ + dev_warn(sec_pmic->dev, + "Unsupported device %lu for manual power off\n", + sec_pmic->device_type); + return; + } + + regmap_update_bits(sec_pmic->regmap_pmic, reg, mask, 0); +} + #ifdef CONFIG_PM_SLEEP static int sec_pmic_suspend(struct device *dev) { @@ -491,6 +553,7 @@ static struct i2c_driver sec_pmic_driver = { }, .probe = sec_pmic_probe, .remove = sec_pmic_remove, + .shutdown = sec_pmic_shutdown, .id_table = sec_pmic_id, }; |