diff options
Diffstat (limited to 'drivers/message')
| -rw-r--r-- | drivers/message/i2o/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/message/i2o/config-osm.c | 494 |
2 files changed, 3 insertions, 494 deletions
diff --git a/drivers/message/i2o/Kconfig b/drivers/message/i2o/Kconfig index 06e8eb19a05c..43a942a29c2e 100644 --- a/drivers/message/i2o/Kconfig +++ b/drivers/message/i2o/Kconfig @@ -53,6 +53,9 @@ config I2O_CONFIG To compile this support as a module, choose M here: the module will be called i2o_config. + Note: If you want to use the new API you have to download the + i2o_config patch from http://i2o.shadowconnect.com/ + config I2O_CONFIG_OLD_IOCTL bool "Enable ioctls (OBSOLETE)" depends on I2O_CONFIG diff --git a/drivers/message/i2o/config-osm.c b/drivers/message/i2o/config-osm.c index fe2e7afc9eae..af32ab4e90cd 100644 --- a/drivers/message/i2o/config-osm.c +++ b/drivers/message/i2o/config-osm.c @@ -30,503 +30,9 @@ static struct i2o_driver i2o_config_driver; -/* Special file operations for sysfs */ -struct fops_attribute { - struct bin_attribute bin; - struct file_operations fops; -}; - -/** - * sysfs_read_dummy - */ -static ssize_t sysfs_read_dummy(struct kobject *kobj, char *buf, loff_t offset, - size_t count) -{ - return 0; -}; - -/** - * sysfs_write_dummy - */ -static ssize_t sysfs_write_dummy(struct kobject *kobj, char *buf, loff_t offset, - size_t count) -{ - return 0; -}; - -/** - * sysfs_create_fops_file - Creates attribute with special file operations - * @kobj: kobject which should contains the attribute - * @attr: attributes which should be used to create file - * - * First creates attribute @attr in kobject @kobj. If it is the first time - * this function is called, merge old fops from sysfs with new one and - * write it back. Afterwords the new fops will be set for the created - * attribute. - * - * Returns 0 on success or negative error code on failure. - */ -static int sysfs_create_fops_file(struct kobject *kobj, - struct fops_attribute *attr) -{ - struct file_operations tmp, *fops; - struct dentry *d; - struct qstr qstr; - int rc; - - fops = &attr->fops; - - if (fops->read) - attr->bin.read = sysfs_read_dummy; - - if (fops->write) - attr->bin.write = sysfs_write_dummy; - - if ((rc = sysfs_create_bin_file(kobj, &attr->bin))) - return rc; - - qstr.name = attr->bin.attr.name; - qstr.len = strlen(qstr.name); - qstr.hash = full_name_hash(qstr.name, qstr.len); - - if ((d = lookup_hash(&qstr, kobj->dentry))) { - if (!fops->owner) { - memcpy(&tmp, d->d_inode->i_fop, sizeof(tmp)); - if (fops->read) - tmp.read = fops->read; - if (fops->write) - tmp.write = fops->write; - memcpy(fops, &tmp, sizeof(tmp)); - } - - d->d_inode->i_fop = fops; - } else - sysfs_remove_bin_file(kobj, &attr->bin); - - return -ENOENT; -}; - -/** - * sysfs_remove_fops_file - Remove attribute with special file operations - * @kobj: kobject which contains the attribute - * @attr: attributes which are used to create file - * - * Only wrapper arround sysfs_remove_bin_file() - * - * Returns 0 on success or negative error code on failure. - */ -static inline int sysfs_remove_fops_file(struct kobject *kobj, - struct fops_attribute *attr) -{ - return sysfs_remove_bin_file(kobj, &attr->bin); -}; - -/** - * i2o_config_read_hrt - Returns the HRT of the controller - * @kob: kernel object handle - * @buf: buffer into which the HRT should be copied - * @off: file offset - * @count: number of bytes to read - * - * Put @count bytes starting at @off into @buf from the HRT of the I2O - * controller corresponding to @kobj. - * - * Returns number of bytes copied into buffer. - */ -static ssize_t i2o_config_read_hrt(struct kobject *kobj, char *buf, - loff_t offset, size_t count) -{ - struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop; - i2o_hrt *hrt = c->hrt.virt; - - u32 size = (hrt->num_entries * hrt->entry_len + 2) * 4; - - if (offset > size) - return 0; - - if (offset + count > size) - count = size - offset; - - memcpy(buf, (u8 *) hrt + offset, count); - - return count; -}; - -/** - * i2o_config_read_lct - Returns the LCT of the controller - * @kob: kernel object handle - * @buf: buffer into which the LCT should be copied - * @off: file offset - * @count: number of bytes to read - * - * Put @count bytes starting at @off into @buf from the LCT of the I2O - * controller corresponding to @kobj. - * - * Returns number of bytes copied into buffer. - */ -static ssize_t i2o_config_read_lct(struct kobject *kobj, char *buf, - loff_t offset, size_t count) -{ - struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop; - u32 size = c->lct->table_size * 4; - - if (offset > size) - return 0; - - if (offset + count > size) - count = size - offset; - - memcpy(buf, (u8 *) c->lct + offset, count); - - return count; -}; - -#define I2O_CONFIG_SW_ATTR(_name,_mode,_type,_swid) \ -static ssize_t i2o_config_##_name##_read(struct file *file, char __user *buf, size_t count, loff_t * offset) { \ - return i2o_config_sw_read(file, buf, count, offset, _type, _swid); \ -};\ -\ -static ssize_t i2o_config_##_name##_write(struct file *file, const char __user *buf, size_t count, loff_t * offset) { \ - return i2o_config_sw_write(file, buf, count, offset, _type, _swid); \ -}; \ -\ -static struct fops_attribute i2o_config_attr_##_name = { \ - .bin = { .attr = { .name = __stringify(_name), .mode = _mode, \ - .owner = THIS_MODULE }, \ - .size = 0, }, \ - .fops = { .write = i2o_config_##_name##_write, \ - .read = i2o_config_##_name##_read} \ -}; - -#ifdef CONFIG_I2O_EXT_ADAPTEC - -/** - * i2o_config_dpt_reagion - Converts type and id to flash region - * @swtype: type of software module reading - * @swid: id of software which should be read - * - * Converts type and id from I2O spec to the matching region for DPT / - * Adaptec controllers. - * - * Returns region which match type and id or -1 on error. - */ -static u32 i2o_config_dpt_region(u8 swtype, u8 swid) -{ - switch (swtype) { - case I2O_SOFTWARE_MODULE_IRTOS: - /* - * content: operation firmware - * region size: - * 0xbc000 for 2554, 3754, 2564, 3757 - * 0x170000 for 2865 - * 0x17c000 for 3966 - */ - if (!swid) - return 0; - - break; - - case I2O_SOFTWARE_MODULE_IOP_PRIVATE: - /* - * content: BIOS and SMOR - * BIOS size: first 0x8000 bytes - * region size: - * 0x40000 for 2554, 3754, 2564, 3757 - * 0x80000 for 2865, 3966 - */ - if (!swid) - return 1; - - break; - - case I2O_SOFTWARE_MODULE_IOP_CONFIG: - switch (swid) { - case 0: - /* - * content: NVRAM defaults - * region size: 0x2000 bytes - */ - return 2; - case 1: - /* - * content: serial number - * region size: 0x2000 bytes - */ - return 3; - } - break; - } - - return -1; -}; - -#endif - -/** - * i2o_config_sw_read - Read a software module from controller - * @file: file pointer - * @buf: buffer into which the data should be copied - * @count: number of bytes to read - * @off: file offset - * @swtype: type of software module reading - * @swid: id of software which should be read - * - * Transfers @count bytes at offset @offset from IOP into buffer using - * type @swtype and id @swid as described in I2O spec. - * - * Returns number of bytes copied into buffer or error code on failure. - */ -static ssize_t i2o_config_sw_read(struct file *file, char __user * buf, - size_t count, loff_t * offset, u8 swtype, - u32 swid) -{ - struct sysfs_dirent *sd = file->f_dentry->d_parent->d_fsdata; - struct kobject *kobj = sd->s_element; - struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop; - u32 m, function = I2O_CMD_SW_UPLOAD; - struct i2o_dma buffer; - struct i2o_message __iomem *msg; - u32 __iomem *mptr; - int rc, status; - - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -EBUSY; - - mptr = &msg->body[3]; - - if ((rc = i2o_dma_alloc(&c->pdev->dev, &buffer, count, GFP_KERNEL))) { - i2o_msg_nop(c, m); - return rc; - } -#ifdef CONFIG_I2O_EXT_ADAPTEC - if (c->adaptec) { - mptr = &msg->body[4]; - function = I2O_CMD_PRIVATE; - - writel(TEN_WORD_MSG_SIZE | SGL_OFFSET_8, &msg->u.head[0]); - - writel(I2O_VENDOR_DPT << 16 | I2O_DPT_FLASH_READ, - &msg->body[0]); - writel(i2o_config_dpt_region(swtype, swid), &msg->body[1]); - writel(*offset, &msg->body[2]); - writel(count, &msg->body[3]); - } else -#endif - writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]); - - writel(0xD0000000 | count, mptr++); - writel(buffer.phys, mptr); - - writel(function << 24 | HOST_TID << 12 | ADAPTER_TID, &msg->u.head[1]); - writel(i2o_config_driver.context, &msg->u.head[2]); - writel(0, &msg->u.head[3]); - -#ifdef CONFIG_I2O_EXT_ADAPTEC - if (!c->adaptec) -#endif - { - writel((u32) swtype << 16 | (u32) 1 << 8, &msg->body[0]); - writel(0, &msg->body[1]); - writel(swid, &msg->body[2]); - } - - status = i2o_msg_post_wait_mem(c, m, 60, &buffer); - - if (status == I2O_POST_WAIT_OK) { - if (!(rc = copy_to_user(buf, buffer.virt, count))) { - rc = count; - *offset += count; - } - } else - rc = -EIO; - - if (status != -ETIMEDOUT) - i2o_dma_free(&c->pdev->dev, &buffer); - - return rc; -}; - -/** - * i2o_config_sw_write - Write a software module to controller - * @file: file pointer - * @buf: buffer into which the data should be copied - * @count: number of bytes to read - * @off: file offset - * @swtype: type of software module writing - * @swid: id of software which should be written - * - * Transfers @count bytes at offset @offset from buffer to IOP using - * type @swtype and id @swid as described in I2O spec. - * - * Returns number of bytes copied from buffer or error code on failure. - */ -static ssize_t i2o_config_sw_write(struct file *file, const char __user * buf, - size_t count, loff_t * offset, u8 swtype, - u32 swid) -{ - struct sysfs_dirent *sd = file->f_dentry->d_parent->d_fsdata; - struct kobject *kobj = sd->s_element; - struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop; - u32 m, function = I2O_CMD_SW_DOWNLOAD; - struct i2o_dma buffer; - struct i2o_message __iomem *msg; - u32 __iomem *mptr; - int rc, status; - - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -EBUSY; - - mptr = &msg->body[3]; - - if ((rc = i2o_dma_alloc(&c->pdev->dev, &buffer, count, GFP_KERNEL))) - goto nop_msg; - - if ((rc = copy_from_user(buffer.virt, buf, count))) - goto free_buffer; - -#ifdef CONFIG_I2O_EXT_ADAPTEC - if (c->adaptec) { - mptr = &msg->body[4]; - function = I2O_CMD_PRIVATE; - - writel(TEN_WORD_MSG_SIZE | SGL_OFFSET_8, &msg->u.head[0]); - - writel(I2O_VENDOR_DPT << 16 | I2O_DPT_FLASH_WRITE, - &msg->body[0]); - writel(i2o_config_dpt_region(swtype, swid), &msg->body[1]); - writel(*offset, &msg->body[2]); - writel(count, &msg->body[3]); - } else -#endif - writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]); - - writel(0xD4000000 | count, mptr++); - writel(buffer.phys, mptr); - - writel(function << 24 | HOST_TID << 12 | ADAPTER_TID, &msg->u.head[1]); - writel(i2o_config_driver.context, &msg->u.head[2]); - writel(0, &msg->u.head[3]); - -#ifdef CONFIG_I2O_EXT_ADAPTEC - if (!c->adaptec) -#endif - { - writel((u32) swtype << 16 | (u32) 1 << 8, &msg->body[0]); - writel(0, &msg->body[1]); - writel(swid, &msg->body[2]); - } - - status = i2o_msg_post_wait_mem(c, m, 60, &buffer); - - if (status != -ETIMEDOUT) - i2o_dma_free(&c->pdev->dev, &buffer); - - if (status != I2O_POST_WAIT_OK) - return -EIO; - - *offset += count; - - return count; - - free_buffer: - i2o_dma_free(&c->pdev->dev, &buffer); - - nop_msg: - i2o_msg_nop(c, m); - - return rc; -}; - -/* attribute for HRT in sysfs */ -static struct bin_attribute i2o_config_hrt_attr = { - .attr = { - .name = "hrt", - .mode = S_IRUGO, - .owner = THIS_MODULE}, - .size = 0, - .read = i2o_config_read_hrt -}; - -/* attribute for LCT in sysfs */ -static struct bin_attribute i2o_config_lct_attr = { - .attr = { - .name = "lct", - .mode = S_IRUGO, - .owner = THIS_MODULE}, - .size = 0, - .read = i2o_config_read_lct -}; - -/* IRTOS firmware access */ -I2O_CONFIG_SW_ATTR(irtos, S_IWRSR, I2O_SOFTWARE_MODULE_IRTOS, 0); - -#ifdef CONFIG_I2O_EXT_ADAPTEC - -/* - * attribute for BIOS / SMOR, nvram and serial number access on DPT / Adaptec - * controllers - */ -I2O_CONFIG_SW_ATTR(bios, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_PRIVATE, 0); -I2O_CONFIG_SW_ATTR(nvram, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_CONFIG, 0); -I2O_CONFIG_SW_ATTR(serial, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_CONFIG, 1); - -#endif - -/** - * i2o_config_notify_controller_add - Notify of added controller - * @c: the controller which was added - * - * If a I2O controller is added, we catch the notification to add sysfs - * entries. - */ -static void i2o_config_notify_controller_add(struct i2o_controller *c) -{ - struct kobject *kobj = &c->exec->device.kobj; - - sysfs_create_bin_file(kobj, &i2o_config_hrt_attr); - sysfs_create_bin_file(kobj, &i2o_config_lct_attr); - - sysfs_create_fops_file(kobj, &i2o_config_attr_irtos); -#ifdef CONFIG_I2O_EXT_ADAPTEC - if (c->adaptec) { - sysfs_create_fops_file(kobj, &i2o_config_attr_bios); - sysfs_create_fops_file(kobj, &i2o_config_attr_nvram); - sysfs_create_fops_file(kobj, &i2o_config_attr_serial); - } -#endif -}; - -/** - * i2o_config_notify_controller_remove - Notify of removed controller - * @c: the controller which was removed - * - * If a I2O controller is removed, we catch the notification to remove the - * sysfs entries. - */ -static void i2o_config_notify_controller_remove(struct i2o_controller *c) -{ - struct kobject *kobj = &c->exec->device.kobj; - -#ifdef CONFIG_I2O_EXT_ADAPTEC - if (c->adaptec) { - sysfs_remove_fops_file(kobj, &i2o_config_attr_serial); - sysfs_remove_fops_file(kobj, &i2o_config_attr_nvram); - sysfs_remove_fops_file(kobj, &i2o_config_attr_bios); - } -#endif - sysfs_remove_fops_file(kobj, &i2o_config_attr_irtos); - - sysfs_remove_bin_file(kobj, &i2o_config_lct_attr); - sysfs_remove_bin_file(kobj, &i2o_config_hrt_attr); -}; - /* Config OSM driver struct */ static struct i2o_driver i2o_config_driver = { .name = OSM_NAME, - .notify_controller_add = i2o_config_notify_controller_add, - .notify_controller_remove = i2o_config_notify_controller_remove }; #ifdef CONFIG_I2O_CONFIG_OLD_IOCTL |