diff options
Diffstat (limited to 'drivers/media/radio')
| -rw-r--r-- | drivers/media/radio/Kconfig | 43 | ||||
| -rw-r--r-- | drivers/media/radio/Makefile | 4 | ||||
| -rw-r--r-- | drivers/media/radio/radio-raremono.c | 387 | ||||
| -rw-r--r-- | drivers/media/radio/si470x/radio-si470x-usb.c | 81 | ||||
| -rw-r--r-- | drivers/media/radio/si470x/radio-si470x.h | 1 | ||||
| -rw-r--r-- | drivers/media/radio/si4713/Kconfig | 40 | ||||
| -rw-r--r-- | drivers/media/radio/si4713/Makefile | 7 | ||||
| -rw-r--r-- | drivers/media/radio/si4713/radio-platform-si4713.c (renamed from drivers/media/radio/radio-si4713.c) | 0 | ||||
| -rw-r--r-- | drivers/media/radio/si4713/radio-usb-si4713.c | 540 | ||||
| -rw-r--r-- | drivers/media/radio/si4713/si4713.c (renamed from drivers/media/radio/si4713-i2c.c) | 279 | ||||
| -rw-r--r-- | drivers/media/radio/si4713/si4713.h (renamed from drivers/media/radio/si4713-i2c.h) | 4 | ||||
| -rw-r--r-- | drivers/media/radio/tea575x.c | 2 |
12 files changed, 1208 insertions, 180 deletions
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 6ecdc39bb366..192f36f2f4aa 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -21,6 +21,12 @@ config RADIO_SI470X source "drivers/media/radio/si470x/Kconfig" +config RADIO_SI4713 + tristate "Silicon Labs Si4713 FM Radio with RDS Transmitter support" + depends on VIDEO_V4L2 + +source "drivers/media/radio/si4713/Kconfig" + config RADIO_SI476X tristate "Silicon Laboratories Si476x I2C FM Radio" depends on I2C && VIDEO_V4L2 @@ -113,29 +119,6 @@ config RADIO_SHARK2 To compile this driver as a module, choose M here: the module will be called radio-shark2. -config I2C_SI4713 - tristate "I2C driver for Silicon Labs Si4713 device" - depends on I2C && VIDEO_V4L2 - ---help--- - Say Y here if you want support to Si4713 I2C device. - This device driver supports only i2c bus. - - To compile this driver as a module, choose M here: the - module will be called si4713. - -config RADIO_SI4713 - tristate "Silicon Labs Si4713 FM Radio Transmitter support" - depends on I2C && VIDEO_V4L2 - select I2C_SI4713 - ---help--- - Say Y here if you want support to Si4713 FM Radio Transmitter. - This device can transmit audio through FM. It can transmit - RDS and RBDS signals as well. This module is the v4l2 radio - interface for the i2c driver of this device. - - To compile this driver as a module, choose M here: the - module will be called radio-si4713. - config USB_KEENE tristate "Keene FM Transmitter USB support" depends on USB && VIDEO_V4L2 @@ -146,6 +129,20 @@ config USB_KEENE To compile this driver as a module, choose M here: the module will be called radio-keene. +config USB_RAREMONO + tristate "Thanko's Raremono AM/FM/SW radio support" + depends on USB && VIDEO_V4L2 + ---help--- + The 'Thanko's Raremono' device contains the Si4734 chip from Silicon Labs Inc. + It is one of the very few or perhaps the only consumer USB radio device + to receive the AM/FM/SW bands. + + Say Y here if you want to connect this type of AM/FM/SW receiver + to your computer's USB port. + + To compile this driver as a module, choose M here: the + module will be called radio-raremono. + config USB_MA901 tristate "Masterkit MA901 USB FM radio support" depends on USB && VIDEO_V4L2 diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile index 3b645601800d..120e791199b2 100644 --- a/drivers/media/radio/Makefile +++ b/drivers/media/radio/Makefile @@ -17,12 +17,11 @@ obj-$(CONFIG_RADIO_RTRACK) += radio-aimslab.o obj-$(CONFIG_RADIO_ZOLTRIX) += radio-zoltrix.o obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o obj-$(CONFIG_RADIO_TRUST) += radio-trust.o -obj-$(CONFIG_I2C_SI4713) += si4713-i2c.o -obj-$(CONFIG_RADIO_SI4713) += radio-si4713.o obj-$(CONFIG_RADIO_SI476X) += radio-si476x.o obj-$(CONFIG_RADIO_MIROPCM20) += radio-miropcm20.o obj-$(CONFIG_USB_DSBR) += dsbr100.o obj-$(CONFIG_RADIO_SI470X) += si470x/ +obj-$(CONFIG_RADIO_SI4713) += si4713/ obj-$(CONFIG_USB_MR800) += radio-mr800.o obj-$(CONFIG_USB_KEENE) += radio-keene.o obj-$(CONFIG_USB_MA901) += radio-ma901.o @@ -33,6 +32,7 @@ obj-$(CONFIG_RADIO_TIMBERDALE) += radio-timb.o obj-$(CONFIG_RADIO_WL1273) += radio-wl1273.o obj-$(CONFIG_RADIO_WL128X) += wl128x/ obj-$(CONFIG_RADIO_TEA575X) += tea575x.o +obj-$(CONFIG_USB_RAREMONO) += radio-raremono.o shark2-objs := radio-shark2.o radio-tea5777.o diff --git a/drivers/media/radio/radio-raremono.c b/drivers/media/radio/radio-raremono.c new file mode 100644 index 000000000000..7b3bdbb1be73 --- /dev/null +++ b/drivers/media/radio/radio-raremono.c @@ -0,0 +1,387 @@ +/* + * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/usb.h> +#include <linux/hid.h> +#include <linux/mutex.h> +#include <linux/videodev2.h> +#include <asm/unaligned.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-event.h> + +/* + * 'Thanko's Raremono' is a Japanese si4734-based AM/FM/SW USB receiver: + * + * http://www.raremono.jp/product/484.html/ + * + * The USB protocol has been reversed engineered using wireshark, initially + * by Dinesh Ram <dinesh.ram@cern.ch> and finished by Hans Verkuil + * <hverkuil@xs4all.nl>. + * + * Sadly the firmware used in this product hides lots of goodies since the + * si4734 has more features than are supported by the firmware. Oh well... + */ + +/* driver and module definitions */ +MODULE_AUTHOR("Hans Verkuil <hverkuil@xs4all.nl>"); +MODULE_DESCRIPTION("Thanko's Raremono AM/FM/SW Receiver USB driver"); +MODULE_LICENSE("GPL v2"); + +/* + * The Device announces itself as Cygnal Integrated Products, Inc. + * + * The vendor and product IDs (and in fact all other lsusb information as + * well) are identical to the si470x Silicon Labs USB FM Radio Reference + * Design board, even though this card has a si4734 device. Clearly the + * designer of this product never bothered to change the USB IDs. + */ + +/* USB Device ID List */ +static struct usb_device_id usb_raremono_device_table[] = { + {USB_DEVICE_AND_INTERFACE_INFO(0x10c4, 0x818a, USB_CLASS_HID, 0, 0) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, usb_raremono_device_table); + +#define BUFFER_LENGTH 64 + +/* Timeout is set to a high value, could probably be reduced. Need more tests */ +#define USB_TIMEOUT 10000 + +/* Frequency limits in KHz */ +#define FM_FREQ_RANGE_LOW 64000 +#define FM_FREQ_RANGE_HIGH 108000 + +#define AM_FREQ_RANGE_LOW 520 +#define AM_FREQ_RANGE_HIGH 1710 + +#define SW_FREQ_RANGE_LOW 2300 +#define SW_FREQ_RANGE_HIGH 26100 + +enum { BAND_FM, BAND_AM, BAND_SW }; + +static const struct v4l2_frequency_band bands[] = { + /* Band FM */ + { + .type = V4L2_TUNER_RADIO, + .index = 0, + .capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO | + V4L2_TUNER_CAP_FREQ_BANDS, + .rangelow = FM_FREQ_RANGE_LOW * 16, + .rangehigh = FM_FREQ_RANGE_HIGH * 16, + .modulation = V4L2_BAND_MODULATION_FM, + }, + /* Band AM */ + { + .type = V4L2_TUNER_RADIO, + .index = 1, + .capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_FREQ_BANDS, + .rangelow = AM_FREQ_RANGE_LOW * 16, + .rangehigh = AM_FREQ_RANGE_HIGH * 16, + .modulation = V4L2_BAND_MODULATION_AM, + }, + /* Band SW */ + { + .type = V4L2_TUNER_RADIO, + .index = 2, + .capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_FREQ_BANDS, + .rangelow = SW_FREQ_RANGE_LOW * 16, + .rangehigh = SW_FREQ_RANGE_HIGH * 16, + .modulation = V4L2_BAND_MODULATION_AM, + }, +}; + +struct raremono_device { + struct usb_device *usbdev; + struct usb_interface *intf; + struct video_device vdev; + struct v4l2_device v4l2_dev; + struct mutex lock; + + u8 *buffer; + u32 band; + unsigned curfreq; +}; + +static inline struct raremono_device *to_raremono_dev(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct raremono_device, v4l2_dev); +} + +/* Set frequency. */ +static int raremono_cmd_main(struct raremono_device *radio, unsigned band, unsigned freq) +{ + unsigned band_offset; + int ret; + + switch (band) { + case BAND_FM: + band_offset = 1; + freq /= 10; + break; + case BAND_AM: + band_offset = 0; + break; + default: + band_offset = 2; + break; + } + radio->buffer[0] = 0x04 + band_offset; + radio->buffer[1] = freq >> 8; + radio->buffer[2] = freq & 0xff; + + ret = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0), + HID_REQ_SET_REPORT, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT, + 0x0300 + radio->buffer[0], 2, + radio->buffer, 3, USB_TIMEOUT); + + if (ret < 0) { + dev_warn(radio->v4l2_dev.dev, "%s failed (%d)\n", __func__, ret); + return ret; + } + radio->curfreq = (band == BAND_FM) ? freq * 10 : freq; + return 0; +} + +/* Handle unplugging the device. + * We call video_unregister_device in any case. + * The last function called in this procedure is + * usb_raremono_device_release. + */ +static void usb_raremono_disconnect(struct usb_interface *intf) +{ + struct raremono_device *radio = to_raremono_dev(usb_get_intfdata(intf)); + + dev_info(&intf->dev, "Thanko's Raremono disconnected\n"); + + mutex_lock(&radio->lock); + usb_set_intfdata(intf, NULL); + video_unregister_device(&radio->vdev); + v4l2_device_disconnect(&radio->v4l2_dev); + mutex_unlock(&radio->lock); + v4l2_device_put(&radio->v4l2_dev); +} + +/* + * Linux Video interface + */ +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *v) +{ + struct raremono_device *radio = video_drvdata(file); + + strlcpy(v->driver, "radio-raremono", sizeof(v->driver)); + strlcpy(v->card, "Thanko's Raremono", sizeof(v->card)); + usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info)); + v->device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO; + v->capabilities = v->device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +static int vidioc_enum_freq_bands(struct file *file, void *priv, + struct v4l2_frequency_band *band) +{ + if (band->tuner != 0) + return -EINVAL; + + if (band->index >= ARRAY_SIZE(bands)) + return -EINVAL; + + *band = bands[band->index]; + + return 0; +} + +static int vidioc_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *v) +{ + struct raremono_device *radio = video_drvdata(file); + int ret; + + if (v->index > 0) + return -EINVAL; + + strlcpy(v->name, "AM/FM/SW", sizeof(v->name)); + v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO | + V4L2_TUNER_CAP_FREQ_BANDS; + v->rangelow = AM_FREQ_RANGE_LOW * 16; + v->rangehigh = FM_FREQ_RANGE_HIGH * 16; + v->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO; + v->audmode = (radio->curfreq < FM_FREQ_RANGE_LOW) ? + V4L2_TUNER_MODE_MONO : V4L2_TUNER_MODE_STEREO; + memset(radio->buffer, 1, BUFFER_LENGTH); + ret = usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + 1, 0xa1, 0x030d, 2, radio->buffer, BUFFER_LENGTH, USB_TIMEOUT); + + if (ret < 0) { + dev_warn(radio->v4l2_dev.dev, "%s failed (%d)\n", __func__, ret); + return ret; + } + v->signal = ((radio->buffer[1] & 0xf) << 8 | radio->buffer[2]) << 4; + return 0; +} + +static int vidioc_s_tuner(struct file *file, void *priv, + const struct v4l2_tuner *v) +{ + return v->index ? -EINVAL : 0; +} + +static int vidioc_s_frequency(struct file *file, void *priv, + const struct v4l2_frequency *f) +{ + struct raremono_device *radio = video_drvdata(file); + u32 freq = f->frequency; + unsigned band; + + if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) + return -EINVAL; + + if (f->frequency >= (FM_FREQ_RANGE_LOW + SW_FREQ_RANGE_HIGH) * 8) + band = BAND_FM; + else if (f->frequency <= (AM_FREQ_RANGE_HIGH + SW_FREQ_RANGE_LOW) * 8) + band = BAND_AM; + else + band = BAND_SW; + + freq = clamp_t(u32, f->frequency, bands[band].rangelow, bands[band].rangehigh); + return raremono_cmd_main(radio, band, freq / 16); +} + +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct raremono_device *radio = video_drvdata(file); + + if (f->tuner != 0) + return -EINVAL; + f->type = V4L2_TUNER_RADIO; + f->frequency = radio->curfreq * 16; + return 0; +} + +/* File system interface */ +static const struct v4l2_file_operations usb_raremono_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = v4l2_fh_release, + .unlocked_ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops usb_raremono_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_enum_freq_bands = vidioc_enum_freq_bands, +}; + +/* check if the device is present and register with v4l and usb if it is */ +static int usb_raremono_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct raremono_device *radio; + int retval = 0; + + radio = devm_kzalloc(&intf->dev, sizeof(struct raremono_device), GFP_KERNEL); + if (radio) + radio->buffer = devm_kmalloc(&intf->dev, BUFFER_LENGTH, GFP_KERNEL); + + if (!radio || !radio->buffer) + return -ENOMEM; + + radio->usbdev = interface_to_usbdev(intf); + radio->intf = intf; + + /* + * This device uses the same USB IDs as the si470x SiLabs reference + * design. So do an additional check: attempt to read the device ID + * from the si470x: the lower 12 bits are 0x0242 for the si470x. The + * Raremono always returns 0x0800 (the meaning of that is unknown, but + * at least it works). + * + * We use this check to determine which device we are dealing with. + */ + msleep(20); + retval = usb_control_msg(radio->usbdev, + usb_rcvctrlpipe(radio->usbdev, 0), + HID_REQ_GET_REPORT, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, + 1, 2, + radio->buffer, 3, 500); + if (retval != 3 || + (get_unaligned_be16(&radio->buffer[1]) & 0xfff) == 0x0242) { + dev_info(&intf->dev, "this is not Thanko's Raremono.\n"); + return -ENODEV; + } + + dev_info(&intf->dev, "Thanko's Raremono connected: (%04X:%04X)\n", + id->idVendor, id->idProduct); + + retval = v4l2_device_register(&intf->dev, &radio->v4l2_dev); + if (retval < 0) { + dev_err(&intf->dev, "couldn't register v4l2_device\n"); + return retval; + } + + mutex_init(&radio->lock); + + strlcpy(radio->vdev.name, radio->v4l2_dev.name, + sizeof(radio->vdev.name)); + radio->vdev.v4l2_dev = &radio->v4l2_dev; + radio->vdev.fops = &usb_raremono_fops; + radio->vdev.ioctl_ops = &usb_raremono_ioctl_ops; + radio->vdev.lock = &radio->lock; + radio->vdev.release = video_device_release_empty; + + usb_set_intfdata(intf, &radio->v4l2_dev); + + video_set_drvdata(&radio->vdev, radio); + set_bit(V4L2_FL_USE_FH_PRIO, &radio->vdev.flags); + + raremono_cmd_main(radio, BAND_FM, 95160); + + retval = video_register_device(&radio->vdev, VFL_TYPE_RADIO, -1); + if (retval == 0) { + dev_info(&intf->dev, "V4L2 device registered as %s\n", + video_device_node_name(&radio->vdev)); + return 0; + } + dev_err(&intf->dev, "could not register video device\n"); + v4l2_device_unregister(&radio->v4l2_dev); + return retval; +} + +/* USB subsystem interface */ +static struct usb_driver usb_raremono_driver = { + .name = "radio-raremono", + .probe = usb_raremono_probe, + .disconnect = usb_raremono_disconnect, + .id_table = usb_raremono_device_table, +}; + +module_usb_driver(usb_raremono_driver); diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c index d6d4d60261d5..07ef40595efd 100644 --- a/drivers/media/radio/si470x/radio-si470x-usb.c +++ b/drivers/media/radio/si470x/radio-si470x-usb.c @@ -137,6 +137,8 @@ MODULE_PARM_DESC(max_rds_errors, "RDS maximum block errors: *1*"); /* interrupt out endpoint 2 every 1 millisecond */ #define UNUSED_REPORT 23 +#define MAX_REPORT_SIZE 64 + /************************************************************************** @@ -208,7 +210,7 @@ MODULE_PARM_DESC(max_rds_errors, "RDS maximum block errors: *1*"); */ static int si470x_get_report(struct si470x_device *radio, void *buf, int size) { - unsigned char *report = (unsigned char *) buf; + unsigned char *report = buf; int retval; retval = usb_control_msg(radio->usbdev, @@ -231,7 +233,7 @@ static int si470x_get_report(struct si470x_device *radio, void *buf, int size) */ static int si470x_set_report(struct si470x_device *radio, void *buf, int size) { - unsigned char *report = (unsigned char *) buf; + unsigned char *report = buf; int retval; retval = usb_control_msg(radio->usbdev, @@ -254,15 +256,14 @@ static int si470x_set_report(struct si470x_device *radio, void *buf, int size) */ int si470x_get_register(struct si470x_device *radio, int regnr) { - unsigned char buf[REGISTER_REPORT_SIZE]; int retval; - buf[0] = REGISTER_REPORT(regnr); + radio->usb_buf[0] = REGISTER_REPORT(regnr); - retval = si470x_get_report(radio, (void *) &buf, sizeof(buf)); + retval = si470x_get_report(radio, radio->usb_buf, REGISTER_REPORT_SIZE); if (retval >= 0) - radio->registers[regnr] = get_unaligned_be16(&buf[1]); + radio->registers[regnr] = get_unaligned_be16(&radio->usb_buf[1]); return (retval < 0) ? -EINVAL : 0; } @@ -273,13 +274,12 @@ int si470x_get_register(struct si470x_device *radio, int regnr) */ int si470x_set_register(struct si470x_device *radio, int regnr) { - unsigned char buf[REGISTER_REPORT_SIZE]; int retval; - buf[0] = REGISTER_REPORT(regnr); - put_unaligned_be16(radio->registers[regnr], &buf[1]); + radio->usb_buf[0] = REGISTER_REPORT(regnr); + put_unaligned_be16(radio->registers[regnr], &radio->usb_buf[1]); - retval = si470x_set_report(radio, (void *) &buf, sizeof(buf)); + retval = si470x_set_report(radio, radio->usb_buf, REGISTER_REPORT_SIZE); return (retval < 0) ? -EINVAL : 0; } @@ -295,18 +295,17 @@ int si470x_set_register(struct si470x_device *radio, int regnr) */ static int si470x_get_all_registers(struct si470x_device *radio) { - unsigned char buf[ENTIRE_REPORT_SIZE]; int retval; unsigned char regnr; - buf[0] = ENTIRE_REPORT; + radio->usb_buf[0] = ENTIRE_REPORT; - retval = si470x_get_report(radio, (void *) &buf, sizeof(buf)); + retval = si470x_get_report(radio, radio->usb_buf, ENTIRE_REPORT_SIZE); if (retval >= 0) for (regnr = 0; regnr < RADIO_REGISTER_NUM; regnr++) radio->registers[regnr] = get_unaligned_be16( - &buf[regnr * RADIO_REGISTER_SIZE + 1]); + &radio->usb_buf[regnr * RADIO_REGISTER_SIZE + 1]); return (retval < 0) ? -EINVAL : 0; } @@ -323,14 +322,13 @@ static int si470x_get_all_registers(struct si470x_device *radio) static int si470x_set_led_state(struct si470x_device *radio, unsigned char led_state) { - unsigned char buf[LED_REPORT_SIZE]; int retval; - buf[0] = LED_REPORT; - buf[1] = LED_COMMAND; - buf[2] = led_state; + radio->usb_buf[0] = LED_REPORT; + radio->usb_buf[1] = LED_COMMAND; + radio->usb_buf[2] = led_state; - retval = si470x_set_report(radio, (void *) &buf, sizeof(buf)); + retval = si470x_set_report(radio, radio->usb_buf, LED_REPORT_SIZE); return (retval < 0) ? -EINVAL : 0; } @@ -346,19 +344,18 @@ static int si470x_set_led_state(struct si470x_device *radio, */ static int si470x_get_scratch_page_versions(struct si470x_device *radio) { - unsigned char buf[SCRATCH_REPORT_SIZE]; int retval; - buf[0] = SCRATCH_REPORT; + radio->usb_buf[0] = SCRATCH_REPORT; - retval = si470x_get_report(radio, (void *) &buf, sizeof(buf)); + retval = si470x_get_report(radio, radio->usb_buf, SCRATCH_REPORT_SIZE); if (retval < 0) dev_warn(&radio->intf->dev, "si470x_get_scratch: " "si470x_get_report returned %d\n", retval); else { - radio->software_version = buf[1]; - radio->hardware_version = buf[2]; + radio->software_version = radio->usb_buf[1]; + radio->hardware_version = radio->usb_buf[2]; } return (retval < 0) ? -EINVAL : 0; @@ -509,6 +506,7 @@ static void si470x_usb_release(struct v4l2_device *v4l2_dev) v4l2_device_unregister(&radio->v4l2_dev); kfree(radio->int_in_buffer); kfree(radio->buffer); + kfree(radio->usb_buf); kfree(radio); } @@ -593,6 +591,11 @@ static int si470x_usb_driver_probe(struct usb_interface *intf, retval = -ENOMEM; goto err_initial; } + radio->usb_buf = kmalloc(MAX_REPORT_SIZE, GFP_KERNEL); + if (radio->usb_buf == NULL) { + retval = -ENOMEM; + goto err_radio; + } radio->usbdev = interface_to_usbdev(intf); radio->intf = intf; radio->band = 1; /* Default to 76 - 108 MHz */ @@ -612,7 +615,7 @@ static int si470x_usb_driver_probe(struct usb_interface *intf, if (!radio->int_in_endpoint) { dev_info(&intf->dev, "could not find interrupt in endpoint\n"); retval = -EIO; - goto err_radio; + goto err_usbbuf; } int_end_size = le16_to_cpu(radio->int_in_endpoint->wMaxPacketSize); @@ -621,7 +624,7 @@ static int si470x_usb_driver_probe(struct usb_interface *intf, if (!radio->int_in_buffer) { dev_info(&intf->dev, "could not allocate int_in_buffer"); retval = -ENOMEM; - goto err_radio; + goto err_usbbuf; } radio->int_in_urb = usb_alloc_urb(0, GFP_KERNEL); @@ -632,6 +635,30 @@ static int si470x_usb_driver_probe(struct usb_interface *intf, } radio->v4l2_dev.release = si470x_usb_release; + + /* + * The si470x SiLabs reference design uses the same USB IDs as + * 'Thanko's Raremono' si4734 based receiver. So check here which we + * have: attempt to read the device ID from the si470x: the lower 12 + * bits should be 0x0242 for the si470x. + * + * We use this check to determine which device we are dealing with. + */ + if (id->idVendor == 0x10c4 && id->idProduct == 0x818a) { + retval = usb_control_msg(radio->usbdev, + usb_rcvctrlpipe(radio->usbdev, 0), + HID_REQ_GET_REPORT, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, + 1, 2, + radio->usb_buf, 3, 500); + if (retval != 3 || + (get_unaligned_be16(&radio->usb_buf[1]) & 0xfff) != 0x0242) { + dev_info(&intf->dev, "this is not a si470x device.\n"); + retval = -ENODEV; + goto err_urb; + } + } + retval = v4l2_device_register(&intf->dev, &radio->v4l2_dev); if (retval < 0) { dev_err(&intf->dev, "couldn't register v4l2_device\n"); @@ -743,6 +770,8 @@ err_urb: usb_free_urb(radio->int_in_urb); err_intbuffer: kfree(radio->int_in_buffer); +err_usbbuf: + kfree(radio->usb_buf); err_radio: kfree(radio); err_initial: diff --git a/drivers/media/radio/si470x/radio-si470x.h b/drivers/media/radio/si470x/radio-si470x.h index 467e95575488..4b7660470e2f 100644 --- a/drivers/media/radio/si470x/radio-si470x.h +++ b/drivers/media/radio/si470x/radio-si470x.h @@ -167,6 +167,7 @@ struct si470x_device { /* reference to USB and video device */ struct usb_device *usbdev; struct usb_interface *intf; + char *usb_buf; /* Interrupt endpoint handling */ char *int_in_buffer; diff --git a/drivers/media/radio/si4713/Kconfig b/drivers/media/radio/si4713/Kconfig new file mode 100644 index 000000000000..a7c3ba85d12b --- /dev/null +++ b/drivers/media/radio/si4713/Kconfig @@ -0,0 +1,40 @@ +config USB_SI4713 + tristate "Silicon Labs Si4713 FM Radio Transmitter support with USB" + depends on USB && RADIO_SI4713 + select SI4713 + ---help--- + This is a driver for USB devices with the Silicon Labs SI4713 + chip. Currently these devices are known to work. + - 10c4:8244: Silicon Labs FM Transmitter USB device. + + Say Y here if you want to connect this type of radio to your + computer's USB port. + + To compile this driver as a module, choose M here: the + module will be called radio-usb-si4713. + +config PLATFORM_SI4713 + tristate "Silicon Labs Si4713 FM Radio Transmitter support with I2C" + depends on I2C && RADIO_SI4713 + select SI4713 + ---help--- + This is a driver for I2C devices with the Silicon Labs SI4713 + chip. + + Say Y here if you want to connect this type of radio to your + computer's I2C port. + + To compile this driver as a module, choose M here: the + module will be called radio-platform-si4713. + +config I2C_SI4713 + tristate "Silicon Labs Si4713 FM Radio Transmitter support" + depends on I2C && RADIO_SI4713 + ---help--- + Say Y here if you want support to Si4713 FM Radio Transmitter. + This device can transmit audio through FM. It can transmit + RDS and RBDS signals as well. This module is the v4l2 radio + interface for the i2c driver of this device. + + To compile this driver as a module, choose M here: the + module will be called si4713. diff --git a/drivers/media/radio/si4713/Makefile b/drivers/media/radio/si4713/Makefile new file mode 100644 index 000000000000..ddaaf925e883 --- /dev/null +++ b/drivers/media/radio/si4713/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for radios with Silicon Labs Si4713 FM Radio Transmitters +# + +obj-$(CONFIG_I2C_SI4713) += si4713.o +obj-$(CONFIG_USB_SI4713) += radio-usb-si4713.o +obj-$(CONFIG_PLATFORM_SI4713) += radio-platform-si4713.o diff --git a/drivers/media/radio/radio-si4713.c b/drivers/media/radio/si4713/radio-platform-si4713.c index ba4cfc946868..ba4cfc946868 100644 --- a/drivers/media/radio/radio-si4713.c +++ b/drivers/media/radio/si4713/radio-platform-si4713.c diff --git a/drivers/media/radio/si4713/radio-usb-si4713.c b/drivers/media/radio/si4713/radio-usb-si4713.c new file mode 100644 index 000000000000..779855b74bcd --- /dev/null +++ b/drivers/media/radio/si4713/radio-usb-si4713.c @@ -0,0 +1,540 @@ +/* + * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. + * All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +/* kernel includes */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/mutex.h> +#include <linux/i2c.h> +/* V4l includes */ +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-event.h> +#include <media/si4713.h> + +#include "si4713.h" + +/* driver and module definitions */ +MODULE_AUTHOR("Dinesh Ram <dinesh.ram@cern.ch>"); +MODULE_DESCRIPTION("Si4713 FM Transmitter USB driver"); +MODULE_LICENSE("GPL v2"); + +/* The Device announces itself as Cygnal Integrated Products, Inc. */ +#define USB_SI4713_VENDOR 0x10c4 +#define USB_SI4713_PRODUCT 0x8244 + +#define BUFFER_LENGTH 64 +#define USB_TIMEOUT 1000 +#define USB_RESP_TIMEOUT 50000 + +/* USB Device ID List */ +static struct usb_device_id usb_si4713_usb_device_table[] = { + {USB_DEVICE_AND_INTERFACE_INFO(USB_SI4713_VENDOR, USB_SI4713_PRODUCT, + USB_CLASS_HID, 0, 0) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, usb_si4713_usb_device_table); + +struct si4713_usb_device { + struct usb_device *usbdev; + struct usb_interface *intf; + struct video_device vdev; + struct v4l2_device v4l2_dev; + struct v4l2_subdev *v4l2_subdev; + struct mutex lock; + struct i2c_adapter i2c_adapter; + + u8 *buffer; +}; + +static inline struct si4713_usb_device *to_si4713_dev(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct si4713_usb_device, v4l2_dev); +} + +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *v) +{ + struct si4713_usb_device *radio = video_drvdata(file); + + strlcpy(v->driver, "radio-usb-si4713", sizeof(v->driver)); + strlcpy(v->card, "Si4713 FM Transmitter", sizeof(v->card)); + usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info)); + v->device_caps = V4L2_CAP_MODULATOR | V4L2_CAP_RDS_OUTPUT; + v->capabilities = v->device_caps | V4L2_CAP_DEVICE_CAPS; + + return 0; +} + +static int vidioc_g_modulator(struct file *file, void *priv, + struct v4l2_modulator *vm) +{ + struct si4713_usb_device *radio = video_drvdata(file); + + return v4l2_subdev_call(radio->v4l2_subdev, tuner, g_modulator, vm); +} + +static int vidioc_s_modulator(struct file *file, void *priv, + const struct v4l2_modulator *vm) +{ + struct si4713_usb_device *radio = video_drvdata(file); + + return v4l2_subdev_call(radio->v4l2_subdev, tuner, s_modulator, vm); +} + +static int vidioc_s_frequency(struct file *file, void *priv, + const struct v4l2_frequency *vf) +{ + struct si4713_usb_device *radio = video_drvdata(file); + + return v4l2_subdev_call(radio->v4l2_subdev, tuner, s_frequency, vf); +} + +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *vf) +{ + struct si4713_usb_device *radio = video_drvdata(file); + + return v4l2_subdev_call(radio->v4l2_subdev, tuner, g_frequency, vf); +} + +static const struct v4l2_ioctl_ops usb_si4713_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_g_modulator = vidioc_g_modulator, + .vidioc_s_modulator = vidioc_s_modulator, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +/* File system interface */ +static const struct v4l2_file_operations usb_si4713_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = v4l2_fh_release, + .poll = v4l2_ctrl_poll, + .unlocked_ioctl = video_ioctl2, +}; + +static void usb_si4713_video_device_release(struct v4l2_device *v4l2_dev) +{ + struct si4713_usb_device *radio = to_si4713_dev(v4l2_dev); + struct i2c_adapter *adapter = &radio->i2c_adapter; + + i2c_del_adapter(adapter); + v4l2_device_unregister(&radio->v4l2_dev); + kfree(radio->buffer); + kfree(radio); +} + +/* + * This command sequence emulates the behaviour of the Windows driver. + * The structure of these commands was determined by sniffing the + * usb traffic of the device during startup. + * Most likely, these commands make some queries to the device. + * Commands are sent to enquire parameters like the bus mode, + * component revision, boot mode, the device serial number etc. + * + * These commands are necessary to be sent in this order during startup. + * The device fails to powerup if these commands are not sent. + * + * The complete list of startup commands is given in the start_seq table below. + */ +static int si4713_send_startup_command(struct si4713_usb_device *radio) +{ + unsigned long until_jiffies = jiffies + usecs_to_jiffies(USB_RESP_TIMEOUT) + 1; + u8 *buffer = radio->buffer; + int retval; + + /* send the command */ + retval = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0), + 0x09, 0x21, 0x033f, 0, radio->buffer, + BUFFER_LENGTH, USB_TIMEOUT); + if (retval < 0) + return retval; + + for (;;) { + /* receive the response */ + retval = usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + 0x01, 0xa1, 0x033f, 0, radio->buffer, + BUFFER_LENGTH, USB_TIMEOUT); + if (retval < 0) + return retval; + if (!radio->buffer[1]) { + /* USB traffic sniffing showed that some commands require + * additional checks. */ + switch (buffer[1]) { + case 0x32: + if (radio->buffer[2] == 0) + return 0; + break; + case 0x14: + case 0x12: + if (radio->buffer[2] & SI4713_CTS) + return 0; + break; + case 0x06: + if ((radio->buffer[2] & SI4713_CTS) && radio->buffer[9] == 0x08) + return 0; + break; + default: + return 0; + } + } + if (time_is_before_jiffies(until_jiffies)) + return -EIO; + msleep(3); + } + + return retval; +} + +struct si4713_start_seq_table { + int len; + u8 payload[8]; +}; + +/* + * Some of the startup commands that could be recognized are : + * (0x03): Get serial number of the board (Response : CB000-00-00) + * (0x06, 0x03, 0x03, 0x08, 0x01, 0x0f) : Get Component revision + */ +static struct si4713_start_seq_table start_seq[] = { + + { 1, { 0x03 } }, + { 2, { 0x32, 0x7f } }, + { 6, { 0x06, 0x03, 0x03, 0x08, 0x01, 0x0f } }, + { 2, { 0x14, 0x02 } }, + { 2, { 0x09, 0x90 } }, + { 3, { 0x08, 0x90, 0xfa } }, + { 2, { 0x36, 0x01 } }, + { 2, { 0x05, 0x03 } }, + { 7, { 0x06, 0x00, 0x06, 0x0e, 0x01, 0x0f, 0x05 } }, + { 1, { 0x12 } }, + /* Commands that are sent after pressing the 'Initialize' + button in the windows application */ + { 1, { 0x03 } }, + { 1, { 0x01 } }, + { 2, { 0x09, 0x90 } }, + { 3, { 0x08, 0x90, 0xfa } }, + { 1, { 0x34 } }, + { 2, { 0x35, 0x01 } }, + { 2, { 0x36, 0x01 } }, + { 2, { 0x30, 0x09 } }, + { 4, { 0x30, 0x06, 0x00, 0xe2 } }, + { 3, { 0x31, 0x01, 0x30 } }, + { 3, { 0x31, 0x04, 0x09 } }, + { 2, { 0x05, 0x02 } }, + { 6, { 0x06, 0x03, 0x03, 0x08, 0x01, 0x0f } }, +}; + +static int si4713_start_seq(struct si4713_usb_device *radio) +{ + int retval = 0; + int i; + + radio->buffer[0] = 0x3f; + + for (i = 0; i < ARRAY_SIZE(start_seq); i++) { + int len = start_seq[i].len; + u8 *payload = start_seq[i].payload; + + memcpy(radio->buffer + 1, payload, len); + memset(radio->buffer + len + 1, 0, BUFFER_LENGTH - 1 - len); + retval = si4713_send_startup_command(radio); + } + + return retval; +} + +static struct i2c_board_info si4713_board_info = { + I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH), +}; + +struct si4713_command_table { + int command_id; + u8 payload[8]; +}; + +/* + * Structure of a command : + * Byte 1 : 0x3f (always) + * Byte 2 : 0x06 (send a command) + * Byte 3 : Unknown + * Byte 4 : Number of arguments + 1 (for the command byte) + * Byte 5 : Number of response bytes + */ +static struct si4713_command_table command_table[] = { + + { SI4713_CMD_POWER_UP, { 0x00, SI4713_PWUP_NARGS + 1, SI4713_PWUP_NRESP} }, + { SI4713_CMD_GET_REV, { 0x03, 0x01, SI4713_GETREV_NRESP } }, + { SI4713_CMD_POWER_DOWN, { 0x00, 0x01, SI4713_PWDN_NRESP} }, + { SI4713_CMD_SET_PROPERTY, { 0x00, SI4713_SET_PROP_NARGS + 1, SI4713_SET_PROP_NRESP } }, + { SI4713_CMD_GET_PROPERTY, { 0x00, SI4713_GET_PROP_NARGS + 1, SI4713_GET_PROP_NRESP } }, + { SI4713_CMD_TX_TUNE_FREQ, { 0x03, SI4713_TXFREQ_NARGS + 1, SI4713_TXFREQ_NRESP } }, + { SI4713_CMD_TX_TUNE_POWER, { 0x03, SI4713_TXPWR_NARGS + 1, SI4713_TXPWR_NRESP } }, + { SI4713_CMD_TX_TUNE_MEASURE, { 0x03, SI4713_TXMEA_NARGS + 1, SI4713_TXMEA_NRESP } }, + { SI4713_CMD_TX_TUNE_STATUS, { 0x00, SI4713_TXSTATUS_NARGS + 1, SI4713_TXSTATUS_NRESP } }, + { SI4713_CMD_TX_ASQ_STATUS, { 0x03, SI4713_ASQSTATUS_NARGS + 1, SI4713_ASQSTATUS_NRESP } }, + { SI4713_CMD_GET_INT_STATUS, { 0x03, 0x01, SI4713_GET_STATUS_NRESP } }, + { SI4713_CMD_TX_RDS_BUFF, { 0x03, SI4713_RDSBUFF_NARGS + 1, SI4713_RDSBUFF_NRESP } }, + { SI4713_CMD_TX_RDS_PS, { 0x00, SI4713_RDSPS_NARGS + 1, SI4713_RDSPS_NRESP } }, +}; + +static int send_command(struct si4713_usb_device *radio, u8 *payload, char *data, int len) +{ + int retval; + + radio->buffer[0] = 0x3f; + radio->buffer[1] = 0x06; + + memcpy(radio->buffer + 2, payload, 3); + memcpy(radio->buffer + 5, data, len); + memset(radio->buffer + 5 + len, 0, BUFFER_LENGTH - 5 - len); + + /* send the command */ + retval = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0), + 0x09, 0x21, 0x033f, 0, radio->buffer, + BUFFER_LENGTH, USB_TIMEOUT); + + return retval < 0 ? retval : 0; +} + +static int si4713_i2c_read(struct si4713_usb_device *radio, char *data, int len) +{ + unsigned long until_jiffies = jiffies + usecs_to_jiffies(USB_RESP_TIMEOUT) + 1; + int retval; + + /* receive the response */ + for (;;) { + retval = usb_control_msg(radio->usbdev, + usb_rcvctrlpipe(radio->usbdev, 0), + 0x01, 0xa1, 0x033f, 0, radio->buffer, + BUFFER_LENGTH, USB_TIMEOUT); + if (retval < 0) + return retval; + + /* + * Check that we get a valid reply back (buffer[1] == 0) and + * that CTS is set before returning, otherwise we wait and try + * again. The i2c driver also does the CTS check, but the timeouts + * used there are much too small for this USB driver, so we wait + * for it here. + */ + if (radio->buffer[1] == 0 && (radio->buffer[2] & SI4713_CTS)) { + memcpy(data, radio->buffer + 2, len); + return 0; + } + if (time_is_before_jiffies(until_jiffies)) { + /* Zero the status value, ensuring CTS isn't set */ + data[0] = 0; + return 0; + } + msleep(3); + } +} + +static int si4713_i2c_write(struct si4713_usb_device *radio, char *data, int len) +{ + int retval = -EINVAL; + int i; + + if (len > BUFFER_LENGTH - 5) + return -EINVAL; + + for (i = 0; i < ARRAY_SIZE(command_table); i++) { + if (data[0] == command_table[i].command_id) + retval = send_command(radio, command_table[i].payload, + data, len); + } + + return retval < 0 ? retval : 0; +} + +static int si4713_transfer(struct i2c_adapter *i2c_adapter, + struct i2c_msg *msgs, int num) +{ + struct si4713_usb_device *radio = i2c_get_adapdata(i2c_adapter); + int retval = -EINVAL; + int i; + + if (num <= 0) + return 0; + + for (i = 0; i < num; i++) { + if (msgs[i].flags & I2C_M_RD) + retval = si4713_i2c_read(radio, msgs[i].buf, msgs[i].len); + else + retval = si4713_i2c_write(radio, msgs[i].buf, msgs[i].len); + if (retval) + break; + } + + return retval ? retval : num; +} + +static u32 si4713_functionality(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm si4713_algo = { + .master_xfer = si4713_transfer, + .functionality = si4713_functionality, +}; + +/* This name value shows up in the sysfs filename associated + with this I2C adapter */ +static struct i2c_adapter si4713_i2c_adapter_template = { + .name = "si4713-i2c", + .owner = THIS_MODULE, + .algo = &si4713_algo, +}; + +static int si4713_register_i2c_adapter(struct si4713_usb_device *radio) +{ + radio->i2c_adapter = si4713_i2c_adapter_template; + /* set up sysfs linkage to our parent device */ + radio->i2c_adapter.dev.parent = &radio->usbdev->dev; + i2c_set_adapdata(&radio->i2c_adapter, radio); + + return i2c_add_adapter(&radio->i2c_adapter); +} + +/* check if the device is present and register with v4l and usb if it is */ +static int usb_si4713_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct si4713_usb_device *radio; + struct i2c_adapter *adapter; + struct v4l2_subdev *sd; + int retval = -ENOMEM; + + dev_info(&intf->dev, "Si4713 development board discovered: (%04X:%04X)\n", + id->idVendor, id->idProduct); + + /* Initialize local device structure */ + radio = kzalloc(sizeof(struct si4713_usb_device), GFP_KERNEL); + if (radio) + radio->buffer = kmalloc(BUFFER_LENGTH, GFP_KERNEL); + + if (!radio || !radio->buffer) { + dev_err(&intf->dev, "kmalloc for si4713_usb_device failed\n"); + kfree(radio); + return -ENOMEM; + } + + mutex_init(&radio->lock); + + radio->usbdev = interface_to_usbdev(intf); + radio->intf = intf; + usb_set_intfdata(intf, &radio->v4l2_dev); + + retval = si4713_start_seq(radio); + if (retval < 0) + goto err_v4l2; + + retval = v4l2_device_register(&intf->dev, &radio->v4l2_dev); + if (retval < 0) { + dev_err(&intf->dev, "couldn't register v4l2_device\n"); + goto err_v4l2; + } + + retval = si4713_register_i2c_adapter(radio); + if (retval < 0) { + dev_err(&intf->dev, "could not register i2c device\n"); + goto err_i2cdev; + } + + adapter = &radio->i2c_adapter; + sd = v4l2_i2c_new_subdev_board(&radio->v4l2_dev, adapter, + &si4713_board_info, NULL); + radio->v4l2_subdev = sd; + if (!sd) { + dev_err(&intf->dev, "cannot get v4l2 subdevice\n"); + retval = -ENODEV; + goto del_adapter; + } + + radio->vdev.ctrl_handler = sd->ctrl_handler; + radio->v4l2_dev.release = usb_si4713_video_device_release; + strlcpy(radio->vdev.name, radio->v4l2_dev.name, + sizeof(radio->vdev.name)); + radio->vdev.v4l2_dev = &radio->v4l2_dev; + radio->vdev.fops = &usb_si4713_fops; + radio->vdev.ioctl_ops = &usb_si4713_ioctl_ops; + radio->vdev.lock = &radio->lock; + radio->vdev.release = video_device_release_empty; + radio->vdev.vfl_dir = VFL_DIR_TX; + + video_set_drvdata(&radio->vdev, radio); + set_bit(V4L2_FL_USE_FH_PRIO, &radio->vdev.flags); + + retval = video_register_device(&radio->vdev, VFL_TYPE_RADIO, -1); + if (retval < 0) { + dev_err(&intf->dev, "could not register video device\n"); + goto del_adapter; + } + + dev_info(&intf->dev, "V4L2 device registered as %s\n", + video_device_node_name(&radio->vdev)); + + return 0; + +del_adapter: + i2c_del_adapter(adapter); +err_i2cdev: + v4l2_device_unregister(&radio->v4l2_dev); +err_v4l2: + kfree(radio->buffer); + kfree(radio); + return retval; +} + +static void usb_si4713_disconnect(struct usb_interface *intf) +{ + struct si4713_usb_device *radio = to_si4713_dev(usb_get_intfdata(intf)); + + dev_info(&intf->dev, "Si4713 development board now disconnected\n"); + + mutex_lock(&radio->lock); + usb_set_intfdata(intf, NULL); + video_unregister_device(&radio->vdev); + v4l2_device_disconnect(&radio->v4l2_dev); + mutex_unlock(&radio->lock); + v4l2_device_put(&radio->v4l2_dev); +} + +/* USB subsystem interface */ +static struct usb_driver usb_si4713_driver = { + .name = "radio-usb-si4713", + .probe = usb_si4713_probe, + .disconnect = usb_si4713_disconnect, + .id_table = usb_si4713_usb_device_table, +}; + +module_usb_driver(usb_si4713_driver); diff --git a/drivers/media/radio/si4713-i2c.c b/drivers/media/radio/si4713/si4713.c index 9ec48ccbcf0b..07d5153811e8 100644 --- a/drivers/media/radio/si4713-i2c.c +++ b/drivers/media/radio/si4713/si4713.c @@ -27,13 +27,12 @@ #include <linux/i2c.h> #include <linux/slab.h> #include <linux/gpio.h> -#include <linux/regulator/consumer.h> #include <linux/module.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> #include <media/v4l2-common.h> -#include "si4713-i2c.h" +#include "si4713.h" /* module parameters */ static int debug; @@ -45,23 +44,18 @@ MODULE_AUTHOR("Eduardo Valentin <eduardo.valentin@nokia.com>"); MODULE_DESCRIPTION("I2C driver for Si4713 FM Radio Transmitter"); MODULE_VERSION("0.0.1"); -static const char *si4713_supply_names[SI4713_NUM_SUPPLIES] = { - "vio", - "vdd", -}; - #define DEFAULT_RDS_PI 0x00 #define DEFAULT_RDS_PTY 0x00 #define DEFAULT_RDS_DEVIATION 0x00C8 #define DEFAULT_RDS_PS_REPEAT_COUNT 0x0003 #define DEFAULT_LIMITER_RTIME 0x1392 #define DEFAULT_LIMITER_DEV 0x102CA -#define DEFAULT_PILOT_FREQUENCY 0x4A38 +#define DEFAULT_PILOT_FREQUENCY 0x4A38 #define DEFAULT_PILOT_DEVIATION 0x1A5E #define DEFAULT_ACOMP_ATIME 0x0000 #define DEFAULT_ACOMP_RTIME 0xF4240L #define DEFAULT_ACOMP_GAIN 0x0F -#define DEFAULT_ACOMP_THRESHOLD (-0x28) +#define DEFAULT_ACOMP_THRESHOLD (-0x28) #define DEFAULT_MUTE 0x01 #define DEFAULT_POWER_LEVEL 88 #define DEFAULT_FREQUENCY 8800 @@ -213,6 +207,7 @@ static int si4713_send_command(struct si4713_device *sdev, const u8 command, u8 response[], const int respn, const int usecs) { struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd); + unsigned long until_jiffies; u8 data1[MAX_ARGS + 1]; int err; @@ -228,30 +223,42 @@ static int si4713_send_command(struct si4713_device *sdev, const u8 command, if (err != argn + 1) { v4l2_err(&sdev->sd, "Error while sending command 0x%02x\n", command); - return (err > 0) ? -EIO : err; + return err < 0 ? err : -EIO; } + until_jiffies = jiffies + usecs_to_jiffies(usecs) + 1; + /* Wait response from interrupt */ - if (!wait_for_completion_timeout(&sdev->work, + if (client->irq) { + if (!wait_for_completion_timeout(&sdev->work, usecs_to_jiffies(usecs) + 1)) - v4l2_warn(&sdev->sd, + v4l2_warn(&sdev->sd, "(%s) Device took too much time to answer.\n", __func__); - - /* Then get the response */ - err = i2c_master_recv(client, response, respn); - if (err != respn) { - v4l2_err(&sdev->sd, - "Error while reading response for command 0x%02x\n", - command); - return (err > 0) ? -EIO : err; } - DBG_BUFFER(&sdev->sd, "Response", response, respn); - if (check_command_failed(response[0])) - return -EBUSY; + do { + err = i2c_master_recv(client, response, respn); + if (err != respn) { + v4l2_err(&sdev->sd, + "Error %d while reading response for command 0x%02x\n", + err, command); + return err < 0 ? err : -EIO; + } - return 0; + DBG_BUFFER(&sdev->sd, "Response", response, respn); + if (!check_command_failed(response[0])) + return 0; + + if (client->irq) + return -EBUSY; + if (usecs <= 1000) + usleep_range(usecs, 1000); + else + usleep_range(1000, 2000); + } while (time_is_after_jiffies(until_jiffies)); + + return -EBUSY; } /* @@ -265,9 +272,9 @@ static int si4713_read_property(struct si4713_device *sdev, u16 prop, u32 *pv) int err; u8 val[SI4713_GET_PROP_NRESP]; /* - * .First byte = 0 - * .Second byte = property's MSB - * .Third byte = property's LSB + * .First byte = 0 + * .Second byte = property's MSB + * .Third byte = property's LSB */ const u8 args[SI4713_GET_PROP_NARGS] = { 0x00, @@ -302,11 +309,11 @@ static int si4713_write_property(struct si4713_device *sdev, u16 prop, u16 val) int rval; u8 resp[SI4713_SET_PROP_NRESP]; /* - * .First byte = 0 - * .Second byte = property's MSB - * .Third byte = property's LSB - * .Fourth byte = value's MSB - * .Fifth byte = value's LSB + * .First byte = 0 + * .Second byte = property's MSB + * .Third byte = property's LSB + * .Fourth byte = value's MSB + * .Fifth byte = value's LSB */ const u8 args[SI4713_SET_PROP_NARGS] = { 0x00, @@ -344,31 +351,36 @@ static int si4713_write_property(struct si4713_device *sdev, u16 prop, u16 val) */ static int si4713_powerup(struct si4713_device *sdev) { + struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd); int err; u8 resp[SI4713_PWUP_NRESP]; /* - * .First byte = Enabled interrupts and boot function - * .Second byte = Input operation mode + * .First byte = Enabled interrupts and boot function + * .Second byte = Input operation mode */ - const u8 args[SI4713_PWUP_NARGS] = { - SI4713_PWUP_CTSIEN | SI4713_PWUP_GPO2OEN | SI4713_PWUP_FUNC_TX, + u8 args[SI4713_PWUP_NARGS] = { + SI4713_PWUP_GPO2OEN | SI4713_PWUP_FUNC_TX, SI4713_PWUP_OPMOD_ANALOG, }; if (sdev->power_state) return 0; - err = regulator_bulk_enable(ARRAY_SIZE(sdev->supplies), - sdev->supplies); - if (err) { - v4l2_err(&sdev->sd, "Failed to enable supplies: %d\n", err); - return err; + if (sdev->supplies) { + err = regulator_bulk_enable(sdev->supplies, sdev->supply_data); + if (err) { + v4l2_err(&sdev->sd, "Failed to enable supplies: %d\n", err); + return err; + } } if (gpio_is_valid(sdev->gpio_reset)) { udelay(50); gpio_set_value(sdev->gpio_reset, 1); } + if (client->irq) + args[0] |= SI4713_PWUP_CTSIEN; + err = si4713_send_command(sdev, SI4713_CMD_POWER_UP, args, ARRAY_SIZE(args), resp, ARRAY_SIZE(resp), @@ -380,13 +392,15 @@ static int si4713_powerup(struct si4713_device *sdev) v4l2_dbg(1, debug, &sdev->sd, "Device in power up mode\n"); sdev->power_state = POWER_ON; - err = si4713_write_property(sdev, SI4713_GPO_IEN, + if (client->irq) + err = si4713_write_property(sdev, SI4713_GPO_IEN, SI4713_STC_INT | SI4713_CTS); - } else { - if (gpio_is_valid(sdev->gpio_reset)) - gpio_set_value(sdev->gpio_reset, 0); - err = regulator_bulk_disable(ARRAY_SIZE(sdev->supplies), - sdev->supplies); + return err; + } + if (gpio_is_valid(sdev->gpio_reset)) + gpio_set_value(sdev->gpio_reset, 0); + if (sdev->supplies) { + err = regulator_bulk_disable(sdev->supplies, sdev->supply_data); if (err) v4l2_err(&sdev->sd, "Failed to disable supplies: %d\n", err); @@ -418,11 +432,13 @@ static int si4713_powerdown(struct si4713_device *sdev) v4l2_dbg(1, debug, &sdev->sd, "Device in reset mode\n"); if (gpio_is_valid(sdev->gpio_reset)) gpio_set_value(sdev->gpio_reset, 0); - err = regulator_bulk_disable(ARRAY_SIZE(sdev->supplies), - sdev->supplies); - if (err) - v4l2_err(&sdev->sd, - "Failed to disable supplies: %d\n", err); + if (sdev->supplies) { + err = regulator_bulk_disable(sdev->supplies, + sdev->supply_data); + if (err) + v4l2_err(&sdev->sd, + "Failed to disable supplies: %d\n", err); + } sdev->power_state = POWER_OFF; } @@ -451,7 +467,7 @@ static int si4713_checkrev(struct si4713_device *sdev) v4l2_info(&sdev->sd, "chip found @ 0x%02x (%s)\n", client->addr << 1, client->adapter->name); } else { - v4l2_err(&sdev->sd, "Invalid product number\n"); + v4l2_err(&sdev->sd, "Invalid product number 0x%X\n", resp[1]); rval = -EINVAL; } return rval; @@ -465,39 +481,45 @@ static int si4713_checkrev(struct si4713_device *sdev) */ static int si4713_wait_stc(struct si4713_device *sdev, const int usecs) { - int err; + struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd); u8 resp[SI4713_GET_STATUS_NRESP]; + unsigned long start_jiffies = jiffies; + int err; - /* Wait response from STC interrupt */ - if (!wait_for_completion_timeout(&sdev->work, - usecs_to_jiffies(usecs) + 1)) + if (client->irq && + !wait_for_completion_timeout(&sdev->work, usecs_to_jiffies(usecs) + 1)) v4l2_warn(&sdev->sd, - "%s: device took too much time to answer (%d usec).\n", - __func__, usecs); - - /* Clear status bits */ - err = si4713_send_command(sdev, SI4713_CMD_GET_INT_STATUS, - NULL, 0, - resp, ARRAY_SIZE(resp), - DEFAULT_TIMEOUT); - - if (err < 0) - goto exit; - - v4l2_dbg(1, debug, &sdev->sd, - "%s: status bits: 0x%02x\n", __func__, resp[0]); - - if (!(resp[0] & SI4713_STC_INT)) - err = -EIO; - -exit: - return err; + "(%s) Device took too much time to answer.\n", __func__); + + for (;;) { + /* Clear status bits */ + err = si4713_send_command(sdev, SI4713_CMD_GET_INT_STATUS, + NULL, 0, + resp, ARRAY_SIZE(resp), + DEFAULT_TIMEOUT); + /* The USB device returns errors when it waits for the + * STC bit to be set. Hence polling */ + if (err >= 0) { + v4l2_dbg(1, debug, &sdev->sd, + "%s: status bits: 0x%02x\n", __func__, resp[0]); + + if (resp[0] & SI4713_STC_INT) + return 0; + } + if (jiffies_to_usecs(jiffies - start_jiffies) > usecs) + return err < 0 ? err : -EIO; + /* We sleep here for 3-4 ms in order to avoid flooding the device + * with USB requests. The si4713 USB driver was developed + * by reverse engineering the Windows USB driver. The windows + * driver also has a ~2.5 ms delay between responses. */ + usleep_range(3000, 4000); + } } /* * si4713_tx_tune_freq - Sets the state of the RF carrier and sets the tuning - * frequency between 76 and 108 MHz in 10 kHz units and - * steps of 50 kHz. + * frequency between 76 and 108 MHz in 10 kHz units and + * steps of 50 kHz. * @sdev: si4713_device structure for the device we are communicating * @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz) */ @@ -506,9 +528,9 @@ static int si4713_tx_tune_freq(struct si4713_device *sdev, u16 frequency) int err; u8 val[SI4713_TXFREQ_NRESP]; /* - * .First byte = 0 - * .Second byte = frequency's MSB - * .Third byte = frequency's LSB + * .First byte = 0 + * .Second byte = frequency's MSB + * .Third byte = frequency's LSB */ const u8 args[SI4713_TXFREQ_NARGS] = { 0x00, @@ -535,14 +557,14 @@ static int si4713_tx_tune_freq(struct si4713_device *sdev, u16 frequency) } /* - * si4713_tx_tune_power - Sets the RF voltage level between 88 and 115 dBuV in - * 1 dB units. A value of 0x00 indicates off. The command - * also sets the antenna tuning capacitance. A value of 0 - * indicates autotuning, and a value of 1 - 191 indicates - * a manual override, which results in a tuning - * capacitance of 0.25 pF x @antcap. + * si4713_tx_tune_power - Sets the RF voltage level between 88 and 120 dBuV in + * 1 dB units. A value of 0x00 indicates off. The command + * also sets the antenna tuning capacitance. A value of 0 + * indicates autotuning, and a value of 1 - 191 indicates + * a manual override, which results in a tuning + * capacitance of 0.25 pF x @antcap. * @sdev: si4713_device structure for the device we are communicating - * @power: tuning power (88 - 115 dBuV, unit/step 1 dB) + * @power: tuning power (88 - 120 dBuV, unit/step 1 dB) * @antcap: value of antenna tuning capacitor (0 - 191) */ static int si4713_tx_tune_power(struct si4713_device *sdev, u8 power, @@ -551,21 +573,21 @@ static int si4713_tx_tune_power(struct si4713_device *sdev, u8 power, int err; u8 val[SI4713_TXPWR_NRESP]; /* - * .First byte = 0 - * .Second byte = 0 - * .Third byte = power - * .Fourth byte = antcap + * .First byte = 0 + * .Second byte = 0 + * .Third byte = power + * .Fourth byte = antcap */ - const u8 args[SI4713_TXPWR_NARGS] = { + u8 args[SI4713_TXPWR_NARGS] = { 0x00, 0x00, power, antcap, }; - if (((power > 0) && (power < SI4713_MIN_POWER)) || - power > SI4713_MAX_POWER || antcap > SI4713_MAX_ANTCAP) - return -EDOM; + /* Map power values 1-87 to MIN_POWER (88) */ + if (power > 0 && power < SI4713_MIN_POWER) + args[2] = power = SI4713_MIN_POWER; err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_POWER, args, ARRAY_SIZE(args), val, @@ -583,12 +605,12 @@ static int si4713_tx_tune_power(struct si4713_device *sdev, u8 power, /* * si4713_tx_tune_measure - Enters receive mode and measures the received noise - * level in units of dBuV on the selected frequency. - * The Frequency must be between 76 and 108 MHz in 10 kHz - * units and steps of 50 kHz. The command also sets the - * antenna tuning capacitance. A value of 0 means - * autotuning, and a value of 1 to 191 indicates manual - * override. + * level in units of dBuV on the selected frequency. + * The Frequency must be between 76 and 108 MHz in 10 kHz + * units and steps of 50 kHz. The command also sets the + * antenna tuning capacitance. A value of 0 means + * autotuning, and a value of 1 to 191 indicates manual + * override. * @sdev: si4713_device structure for the device we are communicating * @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz) * @antcap: value of antenna tuning capacitor (0 - 191) @@ -599,10 +621,10 @@ static int si4713_tx_tune_measure(struct si4713_device *sdev, u16 frequency, int err; u8 val[SI4713_TXMEA_NRESP]; /* - * .First byte = 0 - * .Second byte = frequency's MSB - * .Third byte = frequency's LSB - * .Fourth byte = antcap + * .First byte = 0 + * .Second byte = frequency's MSB + * .Third byte = frequency's LSB + * .Fourth byte = antcap */ const u8 args[SI4713_TXMEA_NARGS] = { 0x00, @@ -632,11 +654,11 @@ static int si4713_tx_tune_measure(struct si4713_device *sdev, u16 frequency, /* * si4713_tx_tune_status- Returns the status of the tx_tune_freq, tx_tune_mea or - * tx_tune_power commands. This command return the current - * frequency, output voltage in dBuV, the antenna tunning - * capacitance value and the received noise level. The - * command also clears the stcint interrupt bit when the - * first bit of its arguments is high. + * tx_tune_power commands. This command return the current + * frequency, output voltage in dBuV, the antenna tunning + * capacitance value and the received noise level. The + * command also clears the stcint interrupt bit when the + * first bit of its arguments is high. * @sdev: si4713_device structure for the device we are communicating * @intack: 0x01 to clear the seek/tune complete interrupt status indicator. * @frequency: returned frequency @@ -651,7 +673,7 @@ static int si4713_tx_tune_status(struct si4713_device *sdev, u8 intack, int err; u8 val[SI4713_TXSTATUS_NRESP]; /* - * .First byte = intack bit + * .First byte = intack bit */ const u8 args[SI4713_TXSTATUS_NARGS] = { intack & SI4713_INTACK_MASK, @@ -812,8 +834,9 @@ static int si4713_set_rds_ps_name(struct si4713_device *sdev, char *ps_name) return rval; } -static int si4713_set_rds_radio_text(struct si4713_device *sdev, char *rt) +static int si4713_set_rds_radio_text(struct si4713_device *sdev, const char *rt) { + static const char cr[RDS_RADIOTEXT_BLK_SIZE] = { RDS_CARRIAGE_RETURN, 0 }; int rval = 0, i; u16 t_index = 0; u8 b_index = 0, cr_inserted = 0; @@ -837,7 +860,7 @@ static int si4713_set_rds_radio_text(struct si4713_device *sdev, char *rt) for (i = 0; i < RDS_RADIOTEXT_BLK_SIZE; i++) { if (!rt[t_index + i] || rt[t_index + i] == RDS_CARRIAGE_RETURN) { - rt[t_index + i] = RDS_CARRIAGE_RETURN; + rt = cr; cr_inserted = 1; break; } @@ -1024,7 +1047,6 @@ static int si4713_initialize(struct si4713_device *sdev) if (rval < 0) return rval; - sdev->frequency = DEFAULT_FREQUENCY; sdev->stereo = 1; sdev->tune_rnl = DEFAULT_TUNE_RNL; @@ -1345,7 +1367,7 @@ static int si4713_probe(struct i2c_client *client, struct v4l2_ctrl_handler *hdl; int rval, i; - sdev = kzalloc(sizeof *sdev, GFP_KERNEL); + sdev = kzalloc(sizeof(*sdev), GFP_KERNEL); if (!sdev) { dev_err(&client->dev, "Failed to alloc video device.\n"); rval = -ENOMEM; @@ -1362,13 +1384,14 @@ static int si4713_probe(struct i2c_client *client, } sdev->gpio_reset = pdata->gpio_reset; gpio_direction_output(sdev->gpio_reset, 0); + sdev->supplies = pdata->supplies; } - for (i = 0; i < ARRAY_SIZE(sdev->supplies); i++) - sdev->supplies[i].supply = si4713_supply_names[i]; + for (i = 0; i < sdev->supplies; i++) + sdev->supply_data[i].supply = pdata->supply_names[i]; - rval = regulator_bulk_get(&client->dev, ARRAY_SIZE(sdev->supplies), - sdev->supplies); + rval = regulator_bulk_get(&client->dev, sdev->supplies, + sdev->supply_data); if (rval) { dev_err(&client->dev, "Cannot get regulators: %d\n", rval); goto free_gpio; @@ -1420,8 +1443,8 @@ static int si4713_probe(struct i2c_client *client, V4L2_CID_AUDIO_COMPRESSION_GAIN, 0, MAX_ACOMP_GAIN, 1, DEFAULT_ACOMP_GAIN); sdev->compression_threshold = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, - V4L2_CID_AUDIO_COMPRESSION_THRESHOLD, MIN_ACOMP_THRESHOLD, - MAX_ACOMP_THRESHOLD, 1, + V4L2_CID_AUDIO_COMPRESSION_THRESHOLD, + MIN_ACOMP_THRESHOLD, MAX_ACOMP_THRESHOLD, 1, DEFAULT_ACOMP_THRESHOLD); sdev->compression_attack_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME, 0, @@ -1443,9 +1466,11 @@ static int si4713_probe(struct i2c_client *client, V4L2_CID_TUNE_PREEMPHASIS, V4L2_PREEMPHASIS_75_uS, 0, V4L2_PREEMPHASIS_50_uS); sdev->tune_pwr_level = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, - V4L2_CID_TUNE_POWER_LEVEL, 0, 120, 1, DEFAULT_POWER_LEVEL); + V4L2_CID_TUNE_POWER_LEVEL, 0, SI4713_MAX_POWER, + 1, DEFAULT_POWER_LEVEL); sdev->tune_ant_cap = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, - V4L2_CID_TUNE_ANTENNA_CAPACITOR, 0, 191, 1, 0); + V4L2_CID_TUNE_ANTENNA_CAPACITOR, 0, SI4713_MAX_ANTCAP, + 1, 0); if (hdl->error) { rval = hdl->error; @@ -1481,7 +1506,7 @@ free_irq: free_ctrls: v4l2_ctrl_handler_free(hdl); put_reg: - regulator_bulk_free(ARRAY_SIZE(sdev->supplies), sdev->supplies); + regulator_bulk_free(sdev->supplies, sdev->supply_data); free_gpio: if (gpio_is_valid(sdev->gpio_reset)) gpio_free(sdev->gpio_reset); @@ -1505,7 +1530,7 @@ static int si4713_remove(struct i2c_client *client) v4l2_device_unregister_subdev(sd); v4l2_ctrl_handler_free(sd->ctrl_handler); - regulator_bulk_free(ARRAY_SIZE(sdev->supplies), sdev->supplies); + regulator_bulk_free(sdev->supplies, sdev->supply_data); if (gpio_is_valid(sdev->gpio_reset)) gpio_free(sdev->gpio_reset); kfree(sdev); diff --git a/drivers/media/radio/si4713-i2c.h b/drivers/media/radio/si4713/si4713.h index 25cdea26343b..4837cf6e0e1b 100644 --- a/drivers/media/radio/si4713-i2c.h +++ b/drivers/media/radio/si4713/si4713.h @@ -15,6 +15,7 @@ #ifndef SI4713_I2C_H #define SI4713_I2C_H +#include <linux/regulator/consumer.h> #include <media/v4l2-subdev.h> #include <media/v4l2-ctrls.h> #include <media/si4713.h> @@ -226,7 +227,8 @@ struct si4713_device { struct v4l2_ctrl *tune_ant_cap; }; struct completion work; - struct regulator_bulk_data supplies[SI4713_NUM_SUPPLIES]; + unsigned supplies; + struct regulator_bulk_data supply_data[SI4713_NUM_SUPPLIES]; int gpio_reset; u32 power_state; u32 rds_enabled; diff --git a/drivers/media/radio/tea575x.c b/drivers/media/radio/tea575x.c index cef06981b7c9..7c14060a40b8 100644 --- a/drivers/media/radio/tea575x.c +++ b/drivers/media/radio/tea575x.c @@ -20,12 +20,12 @@ * */ -#include <asm/io.h> #include <linux/delay.h> #include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/sched.h> +#include <asm/io.h> #include <media/v4l2-device.h> #include <media/v4l2-dev.h> #include <media/v4l2-fh.h> |