diff options
Diffstat (limited to 'drivers/media/dvb/dvb-usb')
| -rw-r--r-- | drivers/media/dvb/dvb-usb/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/Makefile | 3 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/af9015.c | 351 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/af9015.h | 1 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/az6027.c | 1151 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/az6027.h | 14 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/cxusb.c | 3 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/dib0700.h | 1 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/dib0700_core.c | 197 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/dib0700_devices.c | 160 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 9 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/dvb-usb-init.c | 2 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/dvb-usb-remote.c | 1 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/dw2102.c | 95 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/friio-fe.c | 2 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/m920x.c | 141 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/m920x.h | 2 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/opera1.c | 2 |
18 files changed, 1805 insertions, 338 deletions
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 465295b1d14b..e5f91f16ffa4 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -336,3 +336,11 @@ config DVB_USB_EC168 select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE help Say Y here to support the E3C EC168 DVB-T USB2.0 receiver. + +config DVB_USB_AZ6027 + tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support" + depends on DVB_USB + select DVB_STB0899 if !DVB_FE_CUSTOMISE + select DVB_STB6100 if !DVB_FE_CUSTOMISE + help + Say Y here to support the AZ6027 device diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index 72c92cb69a22..1a192453b0e7 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -85,6 +85,9 @@ obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o dvb-usb-ec168-objs = ec168.o obj-$(CONFIG_DVB_USB_EC168) += dvb-usb-ec168.o +dvb-usb-az6027-objs = az6027.o +obj-$(CONFIG_DVB_USB_AZ6027) += dvb-usb-az6027.o + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 8b60a601fb82..d7975383d31b 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -21,6 +21,8 @@ * */ +#include <linux/hash.h> + #include "af9015.h" #include "af9013.h" #include "mt2060.h" @@ -553,26 +555,45 @@ exit: return ret; } -/* dump eeprom */ -static int af9015_eeprom_dump(struct dvb_usb_device *d) +/* hash (and dump) eeprom */ +static int af9015_eeprom_hash(struct usb_device *udev) { - u8 reg, val; + static const unsigned int eeprom_size = 256; + unsigned int reg; + int ret; + u8 val, *eeprom; + struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val}; - for (reg = 0; ; reg++) { - if (reg % 16 == 0) { - if (reg) - deb_info(KERN_CONT "\n"); - deb_info(KERN_DEBUG "%02x:", reg); - } - if (af9015_read_reg_i2c(d, AF9015_I2C_EEPROM, reg, &val) == 0) - deb_info(KERN_CONT " %02x", val); - else - deb_info(KERN_CONT " --"); - if (reg == 0xff) - break; + eeprom = kmalloc(eeprom_size, GFP_KERNEL); + if (eeprom == NULL) + return -ENOMEM; + + for (reg = 0; reg < eeprom_size; reg++) { + req.addr = reg; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto free; + eeprom[reg] = val; } - deb_info(KERN_CONT "\n"); - return 0; + + if (dvb_usb_af9015_debug & 0x01) + print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, eeprom, + eeprom_size); + + BUG_ON(eeprom_size % 4); + + af9015_config.eeprom_sum = 0; + for (reg = 0; reg < eeprom_size / sizeof(u32); reg++) { + af9015_config.eeprom_sum *= GOLDEN_RATIO_PRIME_32; + af9015_config.eeprom_sum += le32_to_cpu(((u32 *)eeprom)[reg]); + } + + deb_info("%s: eeprom sum=%.8x\n", __func__, af9015_config.eeprom_sum); + + ret = 0; +free: + kfree(eeprom); + return ret; } static int af9015_download_ir_table(struct dvb_usb_device *d) @@ -711,12 +732,132 @@ error: return ret; } +struct af9015_setup { + unsigned int id; + struct dvb_usb_rc_key *rc_key_map; + unsigned int rc_key_map_size; + u8 *ir_table; + unsigned int ir_table_size; +}; + +static const struct af9015_setup *af9015_setup_match(unsigned int id, + const struct af9015_setup *table) +{ + for (; table->rc_key_map; table++) + if (table->id == id) + return table; + return NULL; +} + +static const struct af9015_setup af9015_setup_modparam[] = { + { AF9015_REMOTE_A_LINK_DTU_M, + af9015_rc_keys_a_link, ARRAY_SIZE(af9015_rc_keys_a_link), + af9015_ir_table_a_link, ARRAY_SIZE(af9015_ir_table_a_link) }, + { AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, + af9015_rc_keys_msi, ARRAY_SIZE(af9015_rc_keys_msi), + af9015_ir_table_msi, ARRAY_SIZE(af9015_ir_table_msi) }, + { AF9015_REMOTE_MYGICTV_U718, + af9015_rc_keys_mygictv, ARRAY_SIZE(af9015_rc_keys_mygictv), + af9015_ir_table_mygictv, ARRAY_SIZE(af9015_ir_table_mygictv) }, + { AF9015_REMOTE_DIGITTRADE_DVB_T, + af9015_rc_keys_digittrade, ARRAY_SIZE(af9015_rc_keys_digittrade), + af9015_ir_table_digittrade, ARRAY_SIZE(af9015_ir_table_digittrade) }, + { AF9015_REMOTE_AVERMEDIA_KS, + af9015_rc_keys_avermedia, ARRAY_SIZE(af9015_rc_keys_avermedia), + af9015_ir_table_avermedia_ks, ARRAY_SIZE(af9015_ir_table_avermedia_ks) }, + { } +}; + +/* don't add new entries here anymore, use hashes instead */ +static const struct af9015_setup af9015_setup_usbids[] = { + { USB_VID_LEADTEK, + af9015_rc_keys_leadtek, ARRAY_SIZE(af9015_rc_keys_leadtek), + af9015_ir_table_leadtek, ARRAY_SIZE(af9015_ir_table_leadtek) }, + { USB_VID_VISIONPLUS, + af9015_rc_keys_twinhan, ARRAY_SIZE(af9015_rc_keys_twinhan), + af9015_ir_table_twinhan, ARRAY_SIZE(af9015_ir_table_twinhan) }, + { USB_VID_KWORLD_2, /* TODO: use correct rc keys */ + af9015_rc_keys_twinhan, ARRAY_SIZE(af9015_rc_keys_twinhan), + af9015_ir_table_kworld, ARRAY_SIZE(af9015_ir_table_kworld) }, + { USB_VID_AVERMEDIA, + af9015_rc_keys_avermedia, ARRAY_SIZE(af9015_rc_keys_avermedia), + af9015_ir_table_avermedia, ARRAY_SIZE(af9015_ir_table_avermedia) }, + { USB_VID_MSI_2, + af9015_rc_keys_msi_digivox_iii, ARRAY_SIZE(af9015_rc_keys_msi_digivox_iii), + af9015_ir_table_msi_digivox_iii, ARRAY_SIZE(af9015_ir_table_msi_digivox_iii) }, + { } +}; + +static const struct af9015_setup af9015_setup_hashes[] = { + { 0xb8feb708, + af9015_rc_keys_msi, ARRAY_SIZE(af9015_rc_keys_msi), + af9015_ir_table_msi, ARRAY_SIZE(af9015_ir_table_msi) }, + { 0xa3703d00, + af9015_rc_keys_a_link, ARRAY_SIZE(af9015_rc_keys_a_link), + af9015_ir_table_a_link, ARRAY_SIZE(af9015_ir_table_a_link) }, + { 0x9b7dc64e, + af9015_rc_keys_mygictv, ARRAY_SIZE(af9015_rc_keys_mygictv), + af9015_ir_table_mygictv, ARRAY_SIZE(af9015_ir_table_mygictv) }, + { } +}; + +static void af9015_set_remote_config(struct usb_device *udev, + struct dvb_usb_device_properties *props) +{ + const struct af9015_setup *table = NULL; + + if (dvb_usb_af9015_remote) { + /* load remote defined as module param */ + table = af9015_setup_match(dvb_usb_af9015_remote, + af9015_setup_modparam); + } else { + u16 vendor = le16_to_cpu(udev->descriptor.idVendor); + + table = af9015_setup_match(af9015_config.eeprom_sum, + af9015_setup_hashes); + + if (!table && vendor == USB_VID_AFATECH) { + /* Check USB manufacturer and product strings and try + to determine correct remote in case of chip vendor + reference IDs are used. + DO NOT ADD ANYTHING NEW HERE. Use hashes instead. + */ + char manufacturer[10]; + memset(manufacturer, 0, sizeof(manufacturer)); + usb_string(udev, udev->descriptor.iManufacturer, + manufacturer, sizeof(manufacturer)); + if (!strcmp("MSI", manufacturer)) { + /* iManufacturer 1 MSI + iProduct 2 MSI K-VOX */ + table = af9015_setup_match( + AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, + af9015_setup_modparam); + } else if (udev->descriptor.idProduct == + cpu_to_le16(USB_PID_TREKSTOR_DVBT)) { + table = &(const struct af9015_setup){ 0, + af9015_rc_keys_trekstor, + ARRAY_SIZE(af9015_rc_keys_trekstor), + af9015_ir_table_trekstor, + ARRAY_SIZE(af9015_ir_table_trekstor) + }; + } + } else if (!table) + table = af9015_setup_match(vendor, af9015_setup_usbids); + } + + if (table) { + props->rc_key_map = table->rc_key_map; + props->rc_key_map_size = table->rc_key_map_size; + af9015_config.ir_table = table->ir_table; + af9015_config.ir_table_size = table->ir_table_size; + } +} + static int af9015_read_config(struct usb_device *udev) { int ret; u8 val, i, offset = 0; struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val}; - char manufacturer[10]; /* IR remote controller */ req.addr = AF9015_EEPROM_IR_MODE; @@ -728,158 +869,18 @@ static int af9015_read_config(struct usb_device *udev) } if (ret) goto error; + + ret = af9015_eeprom_hash(udev); + if (ret) + goto error; + deb_info("%s: IR mode:%d\n", __func__, val); for (i = 0; i < af9015_properties_count; i++) { if (val == AF9015_IR_MODE_DISABLED) { af9015_properties[i].rc_key_map = NULL; af9015_properties[i].rc_key_map_size = 0; - } else if (dvb_usb_af9015_remote) { - /* load remote defined as module param */ - switch (dvb_usb_af9015_remote) { - case AF9015_REMOTE_A_LINK_DTU_M: - af9015_properties[i].rc_key_map = - af9015_rc_keys_a_link; - af9015_properties[i].rc_key_map_size = - ARRAY_SIZE(af9015_rc_keys_a_link); - af9015_config.ir_table = af9015_ir_table_a_link; - af9015_config.ir_table_size = - ARRAY_SIZE(af9015_ir_table_a_link); - break; - case AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3: - af9015_properties[i].rc_key_map = - af9015_rc_keys_msi; - af9015_properties[i].rc_key_map_size = - ARRAY_SIZE(af9015_rc_keys_msi); - af9015_config.ir_table = af9015_ir_table_msi; - af9015_config.ir_table_size = - ARRAY_SIZE(af9015_ir_table_msi); - break; - case AF9015_REMOTE_MYGICTV_U718: - af9015_properties[i].rc_key_map = - af9015_rc_keys_mygictv; - af9015_properties[i].rc_key_map_size = - ARRAY_SIZE(af9015_rc_keys_mygictv); - af9015_config.ir_table = - af9015_ir_table_mygictv; - af9015_config.ir_table_size = - ARRAY_SIZE(af9015_ir_table_mygictv); - break; - case AF9015_REMOTE_DIGITTRADE_DVB_T: - af9015_properties[i].rc_key_map = - af9015_rc_keys_digittrade; - af9015_properties[i].rc_key_map_size = - ARRAY_SIZE(af9015_rc_keys_digittrade); - af9015_config.ir_table = - af9015_ir_table_digittrade; - af9015_config.ir_table_size = - ARRAY_SIZE(af9015_ir_table_digittrade); - break; - case AF9015_REMOTE_AVERMEDIA_KS: - af9015_properties[i].rc_key_map = - af9015_rc_keys_avermedia; - af9015_properties[i].rc_key_map_size = - ARRAY_SIZE(af9015_rc_keys_avermedia); - af9015_config.ir_table = - af9015_ir_table_avermedia_ks; - af9015_config.ir_table_size = - ARRAY_SIZE(af9015_ir_table_avermedia_ks); - break; - } - } else { - switch (le16_to_cpu(udev->descriptor.idVendor)) { - case USB_VID_LEADTEK: - af9015_properties[i].rc_key_map = - af9015_rc_keys_leadtek; - af9015_properties[i].rc_key_map_size = - ARRAY_SIZE(af9015_rc_keys_leadtek); - af9015_config.ir_table = - af9015_ir_table_leadtek; - af9015_config.ir_table_size = - ARRAY_SIZE(af9015_ir_table_leadtek); - break; - case USB_VID_VISIONPLUS: - af9015_properties[i].rc_key_map = - af9015_rc_keys_twinhan; - af9015_properties[i].rc_key_map_size = - ARRAY_SIZE(af9015_rc_keys_twinhan); - af9015_config.ir_table = - af9015_ir_table_twinhan; - af9015_config.ir_table_size = - ARRAY_SIZE(af9015_ir_table_twinhan); - break; - case USB_VID_KWORLD_2: - /* TODO: use correct rc keys */ - af9015_properties[i].rc_key_map = - af9015_rc_keys_twinhan; - af9015_properties[i].rc_key_map_size = - ARRAY_SIZE(af9015_rc_keys_twinhan); - af9015_config.ir_table = af9015_ir_table_kworld; - af9015_config.ir_table_size = - ARRAY_SIZE(af9015_ir_table_kworld); - break; - /* Check USB manufacturer and product strings and try - to determine correct remote in case of chip vendor - reference IDs are used. */ - case USB_VID_AFATECH: - memset(manufacturer, 0, sizeof(manufacturer)); - usb_string(udev, udev->descriptor.iManufacturer, - manufacturer, sizeof(manufacturer)); - if (!strcmp("Geniatech", manufacturer)) { - /* iManufacturer 1 Geniatech - iProduct 2 AF9015 */ - af9015_properties[i].rc_key_map = - af9015_rc_keys_mygictv; - af9015_properties[i].rc_key_map_size = - ARRAY_SIZE(af9015_rc_keys_mygictv); - af9015_config.ir_table = - af9015_ir_table_mygictv; - af9015_config.ir_table_size = - ARRAY_SIZE(af9015_ir_table_mygictv); - } else if (!strcmp("MSI", manufacturer)) { - /* iManufacturer 1 MSI - iProduct 2 MSI K-VOX */ - af9015_properties[i].rc_key_map = - af9015_rc_keys_msi; - af9015_properties[i].rc_key_map_size = - ARRAY_SIZE(af9015_rc_keys_msi); - af9015_config.ir_table = - af9015_ir_table_msi; - af9015_config.ir_table_size = - ARRAY_SIZE(af9015_ir_table_msi); - } else if (udev->descriptor.idProduct == - cpu_to_le16(USB_PID_TREKSTOR_DVBT)) { - af9015_properties[i].rc_key_map = - af9015_rc_keys_trekstor; - af9015_properties[i].rc_key_map_size = - ARRAY_SIZE(af9015_rc_keys_trekstor); - af9015_config.ir_table = - af9015_ir_table_trekstor; - af9015_config.ir_table_size = - ARRAY_SIZE(af9015_ir_table_trekstor); - } - break; - case USB_VID_AVERMEDIA: - af9015_properties[i].rc_key_map = - af9015_rc_keys_avermedia; - af9015_properties[i].rc_key_map_size = - ARRAY_SIZE(af9015_rc_keys_avermedia); - af9015_config.ir_table = - af9015_ir_table_avermedia; - af9015_config.ir_table_size = - ARRAY_SIZE(af9015_ir_table_avermedia); - break; - case USB_VID_MSI_2: - af9015_properties[i].rc_key_map = - af9015_rc_keys_msi_digivox_iii; - af9015_properties[i].rc_key_map_size = - ARRAY_SIZE(af9015_rc_keys_msi_digivox_iii); - af9015_config.ir_table = - af9015_ir_table_msi_digivox_iii; - af9015_config.ir_table_size = - ARRAY_SIZE(af9015_ir_table_msi_digivox_iii); - break; - } - } + } else + af9015_set_remote_config(udev, &af9015_properties[i]); } /* TS mode - one or two receivers */ @@ -1001,6 +1002,9 @@ static int af9015_read_config(struct usb_device *udev) af9015_af9013_config[i].gpio[1] = AF9013_GPIO_LO; af9015_af9013_config[i].rf_spec_inv = 1; break; + case AF9013_TUNER_TDA18218: + warn("tuner NXP TDA18218 not supported yet"); + return -ENODEV; default: warn("tuner id:%d not supported, please report!", val); return -ENODEV; @@ -1125,11 +1129,6 @@ static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) deb_info("%s: init I2C\n", __func__); ret = af9015_i2c_init(adap->dev); - - /* dump eeprom (debug) */ - ret = af9015_eeprom_dump(adap->dev); - if (ret) - return ret; } else { /* select I2C adapter */ i2c_adap = &state->i2c_adap; @@ -1295,6 +1294,8 @@ static struct usb_device_id af9015_usb_table[] = { /* 25 */{USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2)}, {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_T)}, {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20)}, + {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TINYTWIN_2)}, + {USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS)}, {0}, }; MODULE_DEVICE_TABLE(usb, af9015_usb_table); @@ -1381,7 +1382,8 @@ static struct dvb_usb_device_properties af9015_properties[] = { }, { .name = "DigitalNow TinyTwin DVB-T Receiver", - .cold_ids = {&af9015_usb_table[5], NULL}, + .cold_ids = {&af9015_usb_table[5], + &af9015_usb_table[28], NULL}, .warm_ids = {NULL}, }, { @@ -1566,7 +1568,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .i2c_algo = &af9015_i2c_algo, - .num_device_descs = 6, /* max 9 */ + .num_device_descs = 7, /* max 9 */ .devices = { { .name = "AverMedia AVerTV Volar GPS 805 (A805)", @@ -1600,6 +1602,11 @@ static struct dvb_usb_device_properties af9015_properties[] = { .cold_ids = {&af9015_usb_table[27], NULL}, .warm_ids = {NULL}, }, + { + .name = "Leadtek WinFast DTV2000DS", + .cold_ids = {&af9015_usb_table[29], NULL}, + .warm_ids = {NULL}, + }, } }, }; diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h index 931c8515830d..ef36b1831490 100644 --- a/drivers/media/dvb/dvb-usb/af9015.h +++ b/drivers/media/dvb/dvb-usb/af9015.h @@ -107,6 +107,7 @@ struct af9015_config { u16 mt2060_if1[2]; u16 firmware_size; u16 firmware_checksum; + u32 eeprom_sum; u8 *ir_table; u16 ir_table_size; }; diff --git a/drivers/media/dvb/dvb-usb/az6027.c b/drivers/media/dvb/dvb-usb/az6027.c new file mode 100644 index 000000000000..d7290b2c0913 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/az6027.c @@ -0,0 +1,1151 @@ +/* DVB USB compliant Linux driver for the AZUREWAVE DVB-S/S2 USB2.0 (AZ6027) + * receiver. + * + * Copyright (C) 2009 Adams.Xu <adams.xu@azwave.com.cn> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "az6027.h" + +#include "stb0899_drv.h" +#include "stb0899_reg.h" +#include "stb0899_cfg.h" + +#include "stb6100.h" +#include "stb6100_cfg.h" +#include "dvb_ca_en50221.h" + +int dvb_usb_az6027_debug; +module_param_named(debug, dvb_usb_az6027_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct az6027_device_state { + struct dvb_ca_en50221 ca; + struct mutex ca_mutex; + u8 power_state; +}; + +static const struct stb0899_s1_reg az6027_stb0899_s1_init_1[] = { + + /* 0x0000000b, SYSREG */ + { STB0899_DEV_ID , 0x30 }, + { STB0899_DISCNTRL1 , 0x32 }, + { STB0899_DISCNTRL2 , 0x80 }, + { STB0899_DISRX_ST0 , 0x04 }, + { STB0899_DISRX_ST1 , 0x00 }, + { STB0899_DISPARITY , 0x00 }, + { STB0899_DISFIFO , 0x00 }, + { STB0899_DISSTATUS , 0x20 }, + { STB0899_DISF22 , 0x99 }, + { STB0899_DISF22RX , 0xa8 }, + /* SYSREG ? */ + { STB0899_ACRPRESC , 0x11 }, + { STB0899_ACRDIV1 , 0x0a }, + { STB0899_ACRDIV2 , 0x05 }, + { STB0899_DACR1 , 0x00 }, + { STB0899_DACR2 , 0x00 }, + { STB0899_OUTCFG , 0x00 }, + { STB0899_MODECFG , 0x00 }, + { STB0899_IRQSTATUS_3 , 0xfe }, + { STB0899_IRQSTATUS_2 , 0x03 }, + { STB0899_IRQSTATUS_1 , 0x7c }, + { STB0899_IRQSTATUS_0 , 0xf4 }, + { STB0899_IRQMSK_3 , 0xf3 }, + { STB0899_IRQMSK_2 , 0xfc }, + { STB0899_IRQMSK_1 , 0xff }, + { STB0899_IRQMSK_0 , 0xff }, + { STB0899_IRQCFG , 0x00 }, + { STB0899_I2CCFG , 0x88 }, + { STB0899_I2CRPT , 0x58 }, + { STB0899_IOPVALUE5 , 0x00 }, + { STB0899_IOPVALUE4 , 0x33 }, + { STB0899_IOPVALUE3 , 0x6d }, + { STB0899_IOPVALUE2 , 0x90 }, + { STB0899_IOPVALUE1 , 0x60 }, + { STB0899_IOPVALUE0 , 0x00 }, + { STB0899_GPIO00CFG , 0x82 }, + { STB0899_GPIO01CFG , 0x82 }, + { STB0899_GPIO02CFG , 0x82 }, + { STB0899_GPIO03CFG , 0x82 }, + { STB0899_GPIO04CFG , 0x82 }, + { STB0899_GPIO05CFG , 0x82 }, + { STB0899_GPIO06CFG , 0x82 }, + { STB0899_GPIO07CFG , 0x82 }, + { STB0899_GPIO08CFG , 0x82 }, + { STB0899_GPIO09CFG , 0x82 }, + { STB0899_GPIO10CFG , 0x82 }, + { STB0899_GPIO11CFG , 0x82 }, + { STB0899_GPIO12CFG , 0x82 }, + { STB0899_GPIO13CFG , 0x82 }, + { STB0899_GPIO14CFG , 0x82 }, + { STB0899_GPIO15CFG , 0x82 }, + { STB0899_GPIO16CFG , 0x82 }, + { STB0899_GPIO17CFG , 0x82 }, + { STB0899_GPIO18CFG , 0x82 }, + { STB0899_GPIO19CFG , 0x82 }, + { STB0899_GPIO20CFG , 0x82 }, + { STB0899_SDATCFG , 0xb8 }, + { STB0899_SCLTCFG , 0xba }, + { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */ + { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */ + { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */ + { STB0899_DIRCLKCFG , 0x82 }, + { STB0899_CLKOUT27CFG , 0x7e }, + { STB0899_STDBYCFG , 0x82 }, + { STB0899_CS0CFG , 0x82 }, + { STB0899_CS1CFG , 0x82 }, + { STB0899_DISEQCOCFG , 0x20 }, + { STB0899_GPIO32CFG , 0x82 }, + { STB0899_GPIO33CFG , 0x82 }, + { STB0899_GPIO34CFG , 0x82 }, + { STB0899_GPIO35CFG , 0x82 }, + { STB0899_GPIO36CFG , 0x82 }, + { STB0899_GPIO37CFG , 0x82 }, + { STB0899_GPIO38CFG , 0x82 }, + { STB0899_GPIO39CFG , 0x82 }, + { STB0899_NCOARSE , 0x17 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ + { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ + { STB0899_FILTCTRL , 0x00 }, + { STB0899_SYSCTRL , 0x01 }, + { STB0899_STOPCLK1 , 0x20 }, + { STB0899_STOPCLK2 , 0x00 }, + { STB0899_INTBUFSTATUS , 0x00 }, + { STB0899_INTBUFCTRL , 0x0a }, + { 0xffff , 0xff }, +}; + +static const struct stb0899_s1_reg az6027_stb0899_s1_init_3[] = { + { STB0899_DEMOD , 0x00 }, + { STB0899_RCOMPC , 0xc9 }, + { STB0899_AGC1CN , 0x01 }, + { STB0899_AGC1REF , 0x10 }, + { STB0899_RTC , 0x23 }, + { STB0899_TMGCFG , 0x4e }, + { STB0899_AGC2REF , 0x34 }, + { STB0899_TLSR , 0x84 }, + { STB0899_CFD , 0xf7 }, + { STB0899_ACLC , 0x87 }, + { STB0899_BCLC , 0x94 }, + { STB0899_EQON , 0x41 }, + { STB0899_LDT , 0xf1 }, + { STB0899_LDT2 , 0xe3 }, + { STB0899_EQUALREF , 0xb4 }, + { STB0899_TMGRAMP , 0x10 }, + { STB0899_TMGTHD , 0x30 }, + { STB0899_IDCCOMP , 0xfd }, + { STB0899_QDCCOMP , 0xff }, + { STB0899_POWERI , 0x0c }, + { STB0899_POWERQ , 0x0f }, + { STB0899_RCOMP , 0x6c }, + { STB0899_AGCIQIN , 0x80 }, + { STB0899_AGC2I1 , 0x06 }, + { STB0899_AGC2I2 , 0x00 }, + { STB0899_TLIR , 0x30 }, + { STB0899_RTF , 0x7f }, + { STB0899_DSTATUS , 0x00 }, + { STB0899_LDI , 0xbc }, + { STB0899_CFRM , 0xea }, + { STB0899_CFRL , 0x31 }, + { STB0899_NIRM , 0x2b }, + { STB0899_NIRL , 0x80 }, + { STB0899_ISYMB , 0x1d }, + { STB0899_QSYMB , 0xa6 }, + { STB0899_SFRH , 0x2f }, + { STB0899_SFRM , 0x68 }, + { STB0899_SFRL , 0x40 }, + { STB0899_SFRUPH , 0x2f }, + { STB0899_SFRUPM , 0x68 }, + { STB0899_SFRUPL , 0x40 }, + { STB0899_EQUAI1 , 0x02 }, + { STB0899_EQUAQ1 , 0xff }, + { STB0899_EQUAI2 , 0x04 }, + { STB0899_EQUAQ2 , 0x05 }, + { STB0899_EQUAI3 , 0x02 }, + { STB0899_EQUAQ3 , 0xfd }, + { STB0899_EQUAI4 , 0x03 }, + { STB0899_EQUAQ4 , 0x07 }, + { STB0899_EQUAI5 , 0x08 }, + { STB0899_EQUAQ5 , 0xf5 }, + { STB0899_DSTATUS2 , 0x00 }, + { STB0899_VSTATUS , 0x00 }, + { STB0899_VERROR , 0x86 }, + { STB0899_IQSWAP , 0x2a }, + { STB0899_ECNT1M , 0x00 }, + { STB0899_ECNT1L , 0x00 }, + { STB0899_ECNT2M , 0x00 }, + { STB0899_ECNT2L , 0x00 }, + { STB0899_ECNT3M , 0x0a }, + { STB0899_ECNT3L , 0xad }, + { STB0899_FECAUTO1 , 0x06 }, + { STB0899_FECM , 0x01 }, + { STB0899_VTH12 , 0xb0 }, + { STB0899_VTH23 , 0x7a }, + { STB0899_VTH34 , 0x58 }, + { STB0899_VTH56 , 0x38 }, + { STB0899_VTH67 , 0x34 }, + { STB0899_VTH78 , 0x24 }, + { STB0899_PRVIT , 0xff }, + { STB0899_VITSYNC , 0x19 }, + { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ + { STB0899_TSULC , 0x42 }, + { STB0899_RSLLC , 0x41 }, + { STB0899_TSLPL , 0x12 }, + { STB0899_TSCFGH , 0x0c }, + { STB0899_TSCFGM , 0x00 }, + { STB0899_TSCFGL , 0x00 }, + { STB0899_TSOUT , 0x69 }, /* 0x0d for CAM */ + { STB0899_RSSYNCDEL , 0x00 }, + { STB0899_TSINHDELH , 0x02 }, + { STB0899_TSINHDELM , 0x00 }, + { STB0899_TSINHDELL , 0x00 }, + { STB0899_TSLLSTKM , 0x1b }, + { STB0899_TSLLSTKL , 0xb3 }, + { STB0899_TSULSTKM , 0x00 }, + { STB0899_TSULSTKL , 0x00 }, + { STB0899_PCKLENUL , 0xbc }, + { STB0899_PCKLENLL , 0xcc }, + { STB0899_RSPCKLEN , 0xbd }, + { STB0899_TSSTATUS , 0x90 }, + { STB0899_ERRCTRL1 , 0xb6 }, + { STB0899_ERRCTRL2 , 0x95 }, + { STB0899_ERRCTRL3 , 0x8d }, + { STB0899_DMONMSK1 , 0x27 }, + { STB0899_DMONMSK0 , 0x03 }, + { STB0899_DEMAPVIT , 0x5c }, + { STB0899_PLPARM , 0x19 }, + { STB0899_PDELCTRL , 0x48 }, + { STB0899_PDELCTRL2 , 0x00 }, + { STB0899_BBHCTRL1 , 0x00 }, + { STB0899_BBHCTRL2 , 0x00 }, + { STB0899_HYSTTHRESH , 0x77 }, + { STB0899_MATCSTM , 0x00 }, + { STB0899_MATCSTL , 0x00 }, + { STB0899_UPLCSTM , 0x00 }, + { STB0899_UPLCSTL , 0x00 }, + { STB0899_DFLCSTM , 0x00 }, + { STB0899_DFLCSTL , 0x00 }, + { STB0899_SYNCCST , 0x00 }, + { STB0899_SYNCDCSTM , 0x00 }, + { STB0899_SYNCDCSTL , 0x00 }, + { STB0899_ISI_ENTRY , 0x00 }, + { STB0899_ISI_BIT_EN , 0x00 }, + { STB0899_MATSTRM , 0xf0 }, + { STB0899_MATSTRL , 0x02 }, + { STB0899_UPLSTRM , 0x45 }, + { STB0899_UPLSTRL , 0x60 }, + { STB0899_DFLSTRM , 0xe3 }, + { STB0899_DFLSTRL , 0x00 }, + { STB0899_SYNCSTR , 0x47 }, + { STB0899_SYNCDSTRM , 0x05 }, + { STB0899_SYNCDSTRL , 0x18 }, + { STB0899_CFGPDELSTATUS1 , 0x19 }, + { STB0899_CFGPDELSTATUS2 , 0x2b }, + { STB0899_BBFERRORM , 0x00 }, + { STB0899_BBFERRORL , 0x01 }, + { STB0899_UPKTERRORM , 0x00 }, + { STB0899_UPKTERRORL , 0x00 }, + { 0xffff , 0xff }, +}; + + + +struct stb0899_config az6027_stb0899_config = { + .init_dev = az6027_stb0899_s1_init_1, + .init_s2_demod = stb0899_s2_init_2, + .init_s1_demod = az6027_stb0899_s1_init_3, + .init_s2_fec = stb0899_s2_init_4, + .init_tst = stb0899_s1_init_5, + + .demod_address = 0xd0, /* 0x68, 0xd0 >> 1 */ + + .xtal_freq = 27000000, + .inversion = IQ_SWAP_ON, /* 1 */ + + .lo_clk = 76500000, + .hi_clk = 99000000, + + .esno_ave = STB0899_DVBS2_ESNO_AVE, + .esno_quant = STB0899_DVBS2_ESNO_QUANT, + .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, + .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, + .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, + .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, + .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, + .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, + .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, + + .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, + .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, + .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, + .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, + + .tuner_get_frequency = stb6100_get_frequency, + .tuner_set_frequency = stb6100_set_frequency, + .tuner_set_bandwidth = stb6100_set_bandwidth, + .tuner_get_bandwidth = stb6100_get_bandwidth, + .tuner_set_rfsiggain = NULL, +}; + +struct stb6100_config az6027_stb6100_config = { + .tuner_address = 0xc0, + .refclock = 27000000, +}; + + +/* check for mutex FIXME */ +int az6027_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) +{ + int ret = -1; + if (mutex_lock_interruptible(&d->usb_mutex)) + return -EAGAIN; + + ret = usb_control_msg(d->udev, + usb_rcvctrlpipe(d->udev, 0), + req, + USB_TYPE_VENDOR | USB_DIR_IN, + value, + index, + b, + blen, + 2000); + + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EIO; + } else + ret = 0; + + deb_xfer("in: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, index); + debug_dump(b, blen, deb_xfer); + + mutex_unlock(&d->usb_mutex); + return ret; +} + +static int az6027_usb_out_op(struct dvb_usb_device *d, + u8 req, + u16 value, + u16 index, + u8 *b, + int blen) +{ + int ret; + + deb_xfer("out: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, index); + debug_dump(b, blen, deb_xfer); + + if (mutex_lock_interruptible(&d->usb_mutex)) + return -EAGAIN; + + ret = usb_control_msg(d->udev, + usb_sndctrlpipe(d->udev, 0), + req, + USB_TYPE_VENDOR | USB_DIR_OUT, + value, + index, + b, + blen, + 2000); + + if (ret != blen) { + warn("usb out operation failed. (%d)", ret); + mutex_unlock(&d->usb_mutex); + return -EIO; + } else{ + mutex_unlock(&d->usb_mutex); + return 0; + } +} + +static int az6027_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + int ret; + u8 req; + u16 value; + u16 index; + int blen; + + deb_info("%s %d", __func__, onoff); + + req = 0xBC; + value = onoff; + index = 0; + blen = 0; + + ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); + if (ret != 0) + warn("usb out operation failed. (%d)", ret); + + return ret; +} + +/* keys for the enclosed remote control */ +static struct dvb_usb_rc_key az6027_rc_keys[] = { + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, +}; + +/* remote control stuff (does not work with my box) */ +static int az6027_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + return 0; +} + +/* +int az6027_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 v = onoff; + return az6027_usb_out_op(d,0xBC,v,3,NULL,1); +} +*/ + +static int az6027_ci_read_attribute_mem(struct dvb_ca_en50221 *ca, + int slot, + int address) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6027_device_state *state = (struct az6027_device_state *)d->priv; + + int ret; + u8 req; + u16 value; + u16 index; + int blen; + u8 b[12]; + + if (slot != 0) + return -EINVAL; + + mutex_lock(&state->ca_mutex); + + req = 0xC1; + value = address; + index = 0; + blen = 1; + + ret = az6027_usb_in_op(d, req, value, index, b, blen); + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EINVAL; + } else { + ret = b[0]; + } + + mutex_unlock(&state->ca_mutex); + return ret; +} + +static int az6027_ci_write_attribute_mem(struct dvb_ca_en50221 *ca, + int slot, + int address, + u8 value) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6027_device_state *state = (struct az6027_device_state *)d->priv; + + int ret; + u8 req; + u16 value1; + u16 index; + int blen; + + deb_info("%s %d", __func__, slot); + if (slot != 0) + return -EINVAL; + + mutex_lock(&state->ca_mutex); + req = 0xC2; + value1 = address; + index = value; + blen = 0; + + ret = az6027_usb_out_op(d, req, value1, index, NULL, blen); + if (ret != 0) + warn("usb out operation failed. (%d)", ret); + + mutex_unlock(&state->ca_mutex); + return ret; +} + +static int az6027_ci_read_cam_control(struct dvb_ca_en50221 *ca, + int slot, + u8 address) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6027_device_state *state = (struct az6027_device_state *)d->priv; + + int ret; + u8 req; + u16 value; + u16 index; + int blen; + u8 b[12]; + + if (slot != 0) + return -EINVAL; + + mutex_lock(&state->ca_mutex); + + req = 0xC3; + value = address; + index = 0; + blen = 2; + + ret = az6027_usb_in_op(d, req, value, index, b, blen); + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EINVAL; + } else { + if (b[0] == 0) + warn("Read CI IO error"); + + ret = b[1]; + deb_info("read cam data = %x from 0x%x", b[1], value); + } + + mutex_unlock(&state->ca_mutex); + return ret; +} + +static int az6027_ci_write_cam_control(struct dvb_ca_en50221 *ca, + int slot, + u8 address, + u8 value) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6027_device_state *state = (struct az6027_device_state *)d->priv; + + int ret; + u8 req; + u16 value1; + u16 index; + int blen; + + if (slot != 0) + return -EINVAL; + + mutex_lock(&state->ca_mutex); + req = 0xC4; + value1 = address; + index = value; + blen = 0; + + ret = az6027_usb_out_op(d, req, value1, index, NULL, blen); + if (ret != 0) { + warn("usb out operation failed. (%d)", ret); + goto failed; + } + +failed: + mutex_unlock(&state->ca_mutex); + return ret; +} + +static int CI_CamReady(struct dvb_ca_en50221 *ca, int slot) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + + int ret; + u8 req; + u16 value; + u16 index; + int blen; + u8 b[12]; + + req = 0xC8; + value = 0; + index = 0; + blen = 1; + + ret = az6027_usb_in_op(d, req, value, index, b, blen); + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EIO; + } else{ + ret = b[0]; + } + return ret; +} + +static int az6027_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6027_device_state *state = (struct az6027_device_state *)d->priv; + + int ret, i; + u8 req; + u16 value; + u16 index; + int blen; + + mutex_lock(&state->ca_mutex); + + req = 0xC6; + value = 1; + index = 0; + blen = 0; + + ret = az6027_usb_out_op(d, req, value, index, NULL, blen); + if (ret != 0) { + warn("usb out operation failed. (%d)", ret); + goto failed; + } + + msleep(500); + req = 0xC6; + value = 0; + index = 0; + blen = 0; + + ret = az6027_usb_out_op(d, req, value, index, NULL, blen); + if (ret != 0) { + warn("usb out operation failed. (%d)", ret); + goto failed; + } + + for (i = 0; i < 15; i++) { + msleep(100); + + if (CI_CamReady(ca, slot)) { + deb_info("CAM Ready"); + break; + } + } + msleep(5000); + +failed: + mutex_unlock(&state->ca_mutex); + return ret; +} + +static int az6027_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) +{ + return 0; +} + +static int az6027_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6027_device_state *state = (struct az6027_device_state *)d->priv; + + int ret; + u8 req; + u16 value; + u16 index; + int blen; + + deb_info("%s", __func__); + mutex_lock(&state->ca_mutex); + req = 0xC7; + value = 1; + index = 0; + blen = 0; + + ret = az6027_usb_out_op(d, req, value, index, NULL, blen); + if (ret != 0) { + warn("usb out operation failed. (%d)", ret); + goto failed; + } + +failed: + mutex_unlock(&state->ca_mutex); + return ret; +} + +static int az6027_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6027_device_state *state = (struct az6027_device_state *)d->priv; + int ret; + u8 req; + u16 value; + u16 index; + int blen; + u8 b[12]; + + mutex_lock(&state->ca_mutex); + + req = 0xC5; + value = 0; + index = 0; + blen = 1; + + ret = az6027_usb_in_op(d, req, value, index, b, blen); + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EIO; + } else + ret = 0; + + if (b[0] == 0) { + ret = 0; + + } else if (b[0] == 1) { + ret = DVB_CA_EN50221_POLL_CAM_PRESENT | + DVB_CA_EN50221_POLL_CAM_READY; + } + + mutex_unlock(&state->ca_mutex); + return ret; +} + + +static void az6027_ci_uninit(struct dvb_usb_device *d) +{ + struct az6027_device_state *state; + + deb_info("%s", __func__); + + if (NULL == d) + return; + + state = (struct az6027_device_state *)d->priv; + if (NULL == state) + return; + + if (NULL == state->ca.data) + return; + + dvb_ca_en50221_release(&state->ca); + + memset(&state->ca, 0, sizeof(state->ca)); +} + + +static int az6027_ci_init(struct dvb_usb_adapter *a) +{ + struct dvb_usb_device *d = a->dev; + struct az6027_device_state *state = (struct az6027_device_state *)d->priv; + int ret; + + deb_info("%s", __func__); + + mutex_init(&state->ca_mutex); + + state->ca.owner = THIS_MODULE; + state->ca.read_attribute_mem = az6027_ci_read_attribute_mem; + state->ca.write_attribute_mem = az6027_ci_write_attribute_mem; + state->ca.read_cam_control = az6027_ci_read_cam_control; + state->ca.write_cam_control = az6027_ci_write_cam_control; + state->ca.slot_reset = az6027_ci_slot_reset; + state->ca.slot_shutdown = az6027_ci_slot_shutdown; + state->ca.slot_ts_enable = az6027_ci_slot_ts_enable; + state->ca.poll_slot_status = az6027_ci_poll_slot_status; + state->ca.data = d; + + ret = dvb_ca_en50221_init(&a->dvb_adap, + &state->ca, + 0, /* flags */ + 1);/* n_slots */ + if (ret != 0) { + err("Cannot initialize CI: Error %d.", ret); + memset(&state->ca, 0, sizeof(state->ca)); + return ret; + } + + deb_info("CI initialized."); + + return 0; +} + +/* +static int az6027_read_mac_addr(struct dvb_usb_device *d, u8 mac[6]) +{ + az6027_usb_in_op(d, 0xb7, 6, 0, &mac[0], 6); + return 0; +} +*/ + +static int az6027_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + + u8 buf; + int ret; + struct dvb_usb_adapter *adap = fe->dvb->priv; + + struct i2c_msg i2c_msg = { + .addr = 0x99, + .flags = 0, + .buf = &buf, + .len = 1 + }; + + /* + * 2 --18v + * 1 --13v + * 0 --off + */ + switch (voltage) { + case SEC_VOLTAGE_13: + buf = 1; + ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1); + break; + + case SEC_VOLTAGE_18: + buf = 2; + ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1); + break; + + case SEC_VOLTAGE_OFF: + buf = 0; + ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1); + break; + + default: + return -EINVAL; + } + return 0; +} + + +static int az6027_frontend_poweron(struct dvb_usb_adapter *adap) +{ + int ret; + u8 req; + u16 value; + u16 index; + int blen; + + req = 0xBC; + value = 1; /* power on */ + index = 3; + blen = 0; + + ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); + if (ret != 0) + return -EIO; + + return 0; +} +static int az6027_frontend_reset(struct dvb_usb_adapter *adap) +{ + int ret; + u8 req; + u16 value; + u16 index; + int blen; + + /* reset demodulator */ + req = 0xC0; + value = 1; /* high */ + index = 3; + blen = 0; + + ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); + if (ret != 0) + return -EIO; + + req = 0xC0; + value = 0; /* low */ + index = 3; + blen = 0; + msleep_interruptible(200); + + ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); + if (ret != 0) + return -EIO; + + msleep_interruptible(200); + + req = 0xC0; + value = 1; /*high */ + index = 3; + blen = 0; + + ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); + if (ret != 0) + return -EIO; + + msleep_interruptible(200); + return 0; +} + +static int az6027_frontend_tsbypass(struct dvb_usb_adapter *adap, int onoff) +{ + int ret; + u8 req; + u16 value; + u16 index; + int blen; + + /* TS passthrough */ + req = 0xC7; + value = onoff; + index = 0; + blen = 0; + + ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); + if (ret != 0) + return -EIO; + + return 0; +} + +static int az6027_frontend_attach(struct dvb_usb_adapter *adap) +{ + + az6027_frontend_poweron(adap); + az6027_frontend_reset(adap); + + deb_info("adap = %p, dev = %p\n", adap, adap->dev); + adap->fe = stb0899_attach(&az6027_stb0899_config, &adap->dev->i2c_adap); + + if (adap->fe) { + deb_info("found STB0899 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb0899_config.demod_address); + if (stb6100_attach(adap->fe, &az6027_stb6100_config, &adap->dev->i2c_adap)) { + deb_info("found STB6100 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb6100_config.tuner_address); + adap->fe->ops.set_voltage = az6027_set_voltage; + az6027_ci_init(adap); + } else { + adap->fe = NULL; + } + } else + warn("no front-end attached\n"); + + az6027_frontend_tsbypass(adap, 0); + + return 0; +} + +static struct dvb_usb_device_properties az6027_properties; + +static void az6027_usb_disconnect(struct usb_interface *intf) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + az6027_ci_uninit(d); + dvb_usb_device_exit(intf); +} + + +static int az6027_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf, + &az6027_properties, + THIS_MODULE, + NULL, + adapter_nr); +} + +/* I2C */ +static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i = 0, j = 0, len = 0; + int ret; + u16 index; + u16 value; + int length; + u8 req; + u8 data[256]; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + if (num > 2) + warn("more than 2 i2c messages at a time is not handled yet. TODO."); + + for (i = 0; i < num; i++) { + + if (msg[i].addr == 0x99) { + req = 0xBE; + index = 0; + value = msg[i].buf[0] & 0x00ff; + length = 1; + az6027_usb_out_op(d, req, value, index, data, length); + } + + if (msg[i].addr == 0xd0) { + /* write/read request */ + if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) { + req = 0xB9; + index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff)); + value = msg[i].addr + (msg[i].len << 8); + length = msg[i + 1].len + 6; + ret = az6027_usb_in_op(d, req, value, index, data, length); + len = msg[i + 1].len; + for (j = 0; j < len; j++) + msg[i + 1].buf[j] = data[j + 5]; + + i++; + } else { + + if (msg[i].addr == 0xd0) { + /* demod 16bit addr */ + req = 0xBD; + index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff)); + value = msg[i].addr + (2 << 8); + length = msg[i].len - 2; + len = msg[i].len - 2; + for (j = 0; j < len; j++) + data[j] = msg[i].buf[j + 2]; + + } + az6027_usb_out_op(d, req, value, index, data, length); + } + } + + if (msg[i].addr == 0xc0) { + if (msg[i].flags & I2C_M_RD) { + + req = 0xB9; + index = 0x0; + value = msg[i].addr; + length = msg[i].len + 6; + ret = az6027_usb_in_op(d, req, value, index, data, length); + len = msg[i].len; + for (j = 0; j < len; j++) + msg[i].buf[j] = data[j + 5]; + + } else { + + req = 0xBD; + index = msg[i].buf[0] & 0x00FF; + value = msg[i].addr + (1 << 8); + length = msg[i].len - 1; + len = msg[i].len - 1; + + for (j = 0; j < len; j++) + data[j] = msg[i].buf[j + 1]; + + az6027_usb_out_op(d, req, value, index, data, length); + } + } + } + mutex_unlock(&d->i2c_mutex); + + return i; +} + + +static u32 az6027_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm az6027_i2c_algo = { + .master_xfer = az6027_i2c_xfer, + .functionality = az6027_i2c_func, +}; + +int az6027_identify_state(struct usb_device *udev, + struct dvb_usb_device_properties *props, + struct dvb_usb_device_description **desc, + int *cold) +{ + u8 b[16]; + s16 ret = usb_control_msg(udev, + usb_rcvctrlpipe(udev, 0), + 0xb7, + USB_TYPE_VENDOR | USB_DIR_IN, + 6, + 0, + b, + 6, + USB_CTRL_GET_TIMEOUT); + + *cold = ret <= 0; + + deb_info("cold: %d\n", *cold); + return 0; +} + + +static struct usb_device_id az6027_usb_table[] = { + { USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_AZ6027) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_DVBS2CI) }, + { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_HDCI) }, + { }, +}; + +MODULE_DEVICE_TABLE(usb, az6027_usb_table); + +static struct dvb_usb_device_properties az6027_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-az6027-03.fw", + .no_reconnect = 1, + + .size_of_priv = sizeof(struct az6027_device_state), + .identify_state = az6027_identify_state, + .num_adapters = 1, + .adapter = { + { + .streaming_ctrl = az6027_streaming_ctrl, + .frontend_attach = az6027_frontend_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 10, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + } + }, +/* + .power_ctrl = az6027_power_ctrl, + .read_mac_address = az6027_read_mac_addr, + */ + .rc_key_map = az6027_rc_keys, + .rc_key_map_size = ARRAY_SIZE(az6027_rc_keys), + .rc_interval = 400, + .rc_query = az6027_rc_query, + .i2c_algo = &az6027_i2c_algo, + + .num_device_descs = 1, + .devices = { + { + .name = "AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)", + .cold_ids = { &az6027_usb_table[0], NULL }, + .warm_ids = { NULL }, + }, + { NULL }, + } +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver az6027_usb_driver = { + .name = "dvb_usb_az6027", + .probe = az6027_usb_probe, + .disconnect = az6027_usb_disconnect, + .id_table = az6027_usb_table, +}; + +/* module stuff */ +static int __init az6027_usb_module_init(void) +{ + int result; + + result = usb_register(&az6027_usb_driver); + if (result) { + err("usb_register failed. (%d)", result); + return result; + } + + return 0; +} + +static void __exit az6027_usb_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&az6027_usb_driver); +} + +module_init(az6027_usb_module_init); +module_exit(az6027_usb_module_exit); + +MODULE_AUTHOR("Adams Xu <Adams.xu@azwave.com.cn>"); +MODULE_DESCRIPTION("Driver for AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/az6027.h b/drivers/media/dvb/dvb-usb/az6027.h new file mode 100644 index 000000000000..f3afe17f3f3d --- /dev/null +++ b/drivers/media/dvb/dvb-usb/az6027.h @@ -0,0 +1,14 @@ +#ifndef _DVB_USB_VP6027_H_ +#define _DVB_USB_VP6027_H_ + +#define DVB_USB_LOG_PREFIX "az6027" +#include "dvb-usb.h" + + +extern int dvb_usb_az6027_debug; +#define deb_info(args...) dprintk(dvb_usb_az6027_debug, 0x01, args) +#define deb_xfer(args...) dprintk(dvb_usb_az6027_debug, 0x02, args) +#define deb_rc(args...) dprintk(dvb_usb_az6027_debug, 0x04, args) +#define deb_fe(args...) dprintk(dvb_usb_az6027_debug, 0x08, args) + +#endif diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index 05fb28e9c69e..a7b8405c291e 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -1184,6 +1184,9 @@ static struct atbm8830_config mygica_d689_atbm8830_cfg = { .osc_clk_freq = 30400, /* in kHz */ .if_freq = 0, /* zero IF */ .zif_swap_iq = 1, + .agc_min = 0x2E, + .agc_max = 0x90, + .agc_hold_loop = 0, }; static int cxusb_mygica_d689_frontend_attach(struct dvb_usb_adapter *adap) diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h index 495a90577c5f..83fc24a6c31a 100644 --- a/drivers/media/dvb/dvb-usb/dib0700.h +++ b/drivers/media/dvb/dvb-usb/dib0700.h @@ -42,7 +42,6 @@ struct dib0700_state { u16 mt2060_if1[2]; u8 rc_toggle; u8 rc_counter; - u8 rc_func_version; u8 is_dib7000pc; u8 fw_use_new_i2c_api; u8 disable_streaming_master_mode; diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c index 0d3c9a9a33be..4f961d2d1817 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -471,14 +471,209 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) return dib0700_ctrl_wr(adap->dev, b, 4); } +/* Number of keypresses to ignore before start repeating */ +#define RC_REPEAT_DELAY_V1_20 10 + +/* This is the structure of the RC response packet starting in firmware 1.20 */ +struct dib0700_rc_response { + u8 report_id; + u8 data_state; + u16 system; + u8 data; + u8 not_data; +}; +#define RC_MSG_SIZE_V1_20 6 + +static void dib0700_rc_urb_completion(struct urb *purb) +{ + struct dvb_usb_device *d = purb->context; + struct dvb_usb_rc_key *keymap; + struct dib0700_state *st; + struct dib0700_rc_response poll_reply; + u8 *buf; + int found = 0; + u32 event; + int state; + int i; + + deb_info("%s()\n", __func__); + if (d == NULL) + return; + + if (d->rc_input_dev == NULL) { + /* This will occur if disable_rc_polling=1 */ + usb_free_urb(purb); + return; + } + + keymap = d->props.rc_key_map; + st = d->priv; + buf = (u8 *)purb->transfer_buffer; + + if (purb->status < 0) { + deb_info("discontinuing polling\n"); + usb_free_urb(purb); + return; + } + + if (purb->actual_length != RC_MSG_SIZE_V1_20) { + deb_info("malformed rc msg size=%d\n", purb->actual_length); + goto resubmit; + } + + /* Set initial results in case we exit the function early */ + event = 0; + state = REMOTE_NO_KEY_PRESSED; + + deb_data("IR raw %02X %02X %02X %02X %02X %02X (len %d)\n", buf[0], + buf[1], buf[2], buf[3], buf[4], buf[5], purb->actual_length); + + switch (dvb_usb_dib0700_ir_proto) { + case 0: + /* NEC Protocol */ + poll_reply.report_id = 0; + poll_reply.data_state = 1; + poll_reply.system = buf[2]; + poll_reply.data = buf[4]; + poll_reply.not_data = buf[5]; + + /* NEC protocol sends repeat code as 0 0 0 FF */ + if ((poll_reply.system == 0x00) && (poll_reply.data == 0x00) + && (poll_reply.not_data == 0xff)) { + poll_reply.data_state = 2; + break; + } + break; + default: + /* RC5 Protocol */ + poll_reply.report_id = buf[0]; + poll_reply.data_state = buf[1]; + poll_reply.system = (buf[2] << 8) | buf[3]; + poll_reply.data = buf[4]; + poll_reply.not_data = buf[5]; + break; + } + + if ((poll_reply.data + poll_reply.not_data) != 0xff) { + /* Key failed integrity check */ + err("key failed integrity check: %04x %02x %02x", + poll_reply.system, + poll_reply.data, poll_reply.not_data); + goto resubmit; + } + + deb_data("rid=%02x ds=%02x sm=%04x d=%02x nd=%02x\n", + poll_reply.report_id, poll_reply.data_state, + poll_reply.system, poll_reply.data, poll_reply.not_data); + + /* Find the key in the map */ + for (i = 0; i < d->props.rc_key_map_size; i++) { + if (rc5_custom(&keymap[i]) == (poll_reply.system & 0xff) && + rc5_data(&keymap[i]) == poll_reply.data) { + event = keymap[i].event; + found = 1; + break; + } + } + + if (found == 0) { + err("Unknown remote controller key: %04x %02x %02x", + poll_reply.system, poll_reply.data, poll_reply.not_data); + d->last_event = 0; + goto resubmit; + } + + if (poll_reply.data_state == 1) { + /* New key hit */ + st->rc_counter = 0; + event = keymap[i].event; + state = REMOTE_KEY_PRESSED; + d->last_event = keymap[i].event; + } else if (poll_reply.data_state == 2) { + /* Key repeated */ + st->rc_counter++; + + /* prevents unwanted double hits */ + if (st->rc_counter > RC_REPEAT_DELAY_V1_20) { + event = d->last_event; + state = REMOTE_KEY_PRESSED; + st->rc_counter = RC_REPEAT_DELAY_V1_20; + } + } else { + err("Unknown data state [%d]", poll_reply.data_state); + } + + switch (state) { + case REMOTE_NO_KEY_PRESSED: + break; + case REMOTE_KEY_PRESSED: + deb_info("key pressed\n"); + d->last_event = event; + case REMOTE_KEY_REPEAT: + deb_info("key repeated\n"); + input_event(d->rc_input_dev, EV_KEY, event, 1); + input_sync(d->rc_input_dev); + input_event(d->rc_input_dev, EV_KEY, d->last_event, 0); + input_sync(d->rc_input_dev); + break; + default: + break; + } + +resubmit: + /* Clean the buffer before we requeue */ + memset(purb->transfer_buffer, 0, RC_MSG_SIZE_V1_20); + + /* Requeue URB */ + usb_submit_urb(purb, GFP_ATOMIC); +} + int dib0700_rc_setup(struct dvb_usb_device *d) { + struct dib0700_state *st = d->priv; u8 rc_setup[3] = {REQUEST_SET_RC, dvb_usb_dib0700_ir_proto, 0}; - int i = dib0700_ctrl_wr(d, rc_setup, 3); + struct urb *purb; + int ret; + int i; + + if (d->props.rc_key_map == NULL) + return 0; + + /* Set the IR mode */ + i = dib0700_ctrl_wr(d, rc_setup, 3); if (i<0) { err("ir protocol setup failed"); return -1; } + + if (st->fw_version < 0x10200) + return 0; + + /* Starting in firmware 1.20, the RC info is provided on a bulk pipe */ + purb = usb_alloc_urb(0, GFP_KERNEL); + if (purb == NULL) { + err("rc usb alloc urb failed\n"); + return -1; + } + + purb->transfer_buffer = kzalloc(RC_MSG_SIZE_V1_20, GFP_KERNEL); + if (purb->transfer_buffer == NULL) { + err("rc kzalloc failed\n"); + usb_free_urb(purb); + return -1; + } + + purb->status = -EINPROGRESS; + usb_fill_bulk_urb(purb, d->udev, usb_rcvbulkpipe(d->udev, 1), + purb->transfer_buffer, RC_MSG_SIZE_V1_20, + dib0700_rc_urb_completion, d); + + ret = usb_submit_urb(purb, GFP_ATOMIC); + if (ret != 0) { + err("rc submit urb failed\n"); + return -1; + } + return 0; } diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 44972d01bbd0..34eab05afc6c 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -472,20 +472,25 @@ static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; /* Number of keypresses to ignore before start repeating */ #define RC_REPEAT_DELAY 6 -#define RC_REPEAT_DELAY_V1_20 10 - - -/* Used by firmware versions < 1.20 (deprecated) */ -static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event, - int *state) +static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { u8 key[4]; int i; struct dvb_usb_rc_key *keymap = d->props.rc_key_map; struct dib0700_state *st = d->priv; + *event = 0; *state = REMOTE_NO_KEY_PRESSED; + + if (st->fw_version >= 0x10200) { + /* For 1.20 firmware , We need to keep the RC polling + callback so we can reuse the input device setup in + dvb-usb-remote.c. However, the actual work is being done + in the bulk URB completion handler. */ + return 0; + } + i=dib0700_ctrl_rd(d,rc_request,2,key,4); if (i<=0) { err("RC Query Failed"); @@ -557,149 +562,6 @@ static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event, return 0; } -/* This is the structure of the RC response packet starting in firmware 1.20 */ -struct dib0700_rc_response { - u8 report_id; - u8 data_state; - u16 system; - u8 data; - u8 not_data; -}; - -/* This supports the new IR response format for firmware v1.20 */ -static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event, - int *state) -{ - struct dvb_usb_rc_key *keymap = d->props.rc_key_map; - struct dib0700_state *st = d->priv; - struct dib0700_rc_response poll_reply; - u8 buf[6]; - int i; - int status; - int actlen; - int found = 0; - - /* Set initial results in case we exit the function early */ - *event = 0; - *state = REMOTE_NO_KEY_PRESSED; - - /* Firmware v1.20 provides RC data via bulk endpoint 1 */ - status = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 1), buf, - sizeof(buf), &actlen, 50); - if (status < 0) { - /* No data available (meaning no key press) */ - return 0; - } - - - switch (dvb_usb_dib0700_ir_proto) { - case 0: - poll_reply.report_id = 0; - poll_reply.data_state = 1; - poll_reply.system = buf[2]; - poll_reply.data = buf[4]; - poll_reply.not_data = buf[5]; - - /* NEC protocol sends repeat code as 0 0 0 FF */ - if ((poll_reply.system == 0x00) && (poll_reply.data == 0x00) - && (poll_reply.not_data == 0xff)) { - poll_reply.data_state = 2; - break; - } - break; - default: - if (actlen != sizeof(buf)) { - /* We didn't get back the 6 byte message we expected */ - err("Unexpected RC response size [%d]", actlen); - return -1; - } - - poll_reply.report_id = buf[0]; - poll_reply.data_state = buf[1]; - poll_reply.system = (buf[2] << 8) | buf[3]; - poll_reply.data = buf[4]; - poll_reply.not_data = buf[5]; - - break; - } - - if ((poll_reply.data + poll_reply.not_data) != 0xff) { - /* Key failed integrity check */ - err("key failed integrity check: %04x %02x %02x", - poll_reply.system, - poll_reply.data, poll_reply.not_data); - return -1; - } - - - /* Find the key in the map */ - for (i = 0; i < d->props.rc_key_map_size; i++) { - if (rc5_custom(&keymap[i]) == (poll_reply.system & 0xff) && - rc5_data(&keymap[i]) == poll_reply.data) { - *event = keymap[i].event; - found = 1; - break; - } - } - - if (found == 0) { - err("Unknown remote controller key: %04x %02x %02x", - poll_reply.system, - poll_reply.data, poll_reply.not_data); - d->last_event = 0; - return 0; - } - - if (poll_reply.data_state == 1) { - /* New key hit */ - st->rc_counter = 0; - *event = keymap[i].event; - *state = REMOTE_KEY_PRESSED; - d->last_event = keymap[i].event; - } else if (poll_reply.data_state == 2) { - /* Key repeated */ - st->rc_counter++; - - /* prevents unwanted double hits */ - if (st->rc_counter > RC_REPEAT_DELAY_V1_20) { - *event = d->last_event; - *state = REMOTE_KEY_PRESSED; - st->rc_counter = RC_REPEAT_DELAY_V1_20; - } - } else { - err("Unknown data state [%d]", poll_reply.data_state); - } - - return 0; -} - -static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state) -{ - struct dib0700_state *st = d->priv; - - /* Because some people may have improperly named firmware files, - let's figure out whether to use the new firmware call or the legacy - call based on the firmware version embedded in the file */ - if (st->rc_func_version == 0) { - u32 hwver, romver, ramver, fwtype; - int ret = dib0700_get_version(d, &hwver, &romver, &ramver, - &fwtype); - if (ret < 0) { - err("Could not determine version info"); - return -1; - } - if (ramver < 0x10200) - st->rc_func_version = 1; - else - st->rc_func_version = 2; - } - - if (st->rc_func_version == 2) - return dib0700_rc_query_v1_20(d, event, state); - else - return dib0700_rc_query_legacy(d, event, state); -} - static struct dvb_usb_rc_key dib0700_rc_keys[] = { /* Key codes for the tiny Pinnacle remote*/ { 0x0700, KEY_MUTE }, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index bc3581d58ced..ae8b57acfe05 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -64,6 +64,8 @@ #define USB_VID_HUMAX_COEX 0x10b9 #define USB_VID_774 0x7a69 #define USB_VID_EVOLUTEPC 0x1e59 +#define USB_VID_AZUREWAVE 0x13d3 +#define USB_VID_TECHNISAT 0x14f7 /* Product IDs */ #define USB_PID_ADSTECH_USB2_COLD 0xa333 @@ -138,6 +140,7 @@ #define USB_PID_TWINHAN_VP7021_COLD 0x3207 #define USB_PID_TWINHAN_VP7021_WARM 0x3208 #define USB_PID_TINYTWIN 0x3226 +#define USB_PID_TINYTWIN_2 0xe402 #define USB_PID_DNTV_TINYUSB2_COLD 0x3223 #define USB_PID_DNTV_TINYUSB2_WARM 0x3224 #define USB_PID_ULTIMA_TVBOX_COLD 0x8105 @@ -209,6 +212,7 @@ #define USB_PID_PINNACLE_PCTV71E 0x022b #define USB_PID_PINNACLE_PCTV72E 0x0236 #define USB_PID_PINNACLE_PCTV73E 0x0237 +#define USB_PID_PINNACLE_PCTV310E 0x3211 #define USB_PID_PINNACLE_PCTV801E 0x023a #define USB_PID_PINNACLE_PCTV801E_SE 0x023b #define USB_PID_PINNACLE_PCTV73A 0x0243 @@ -248,6 +252,7 @@ #define USB_PID_DIGIVOX_MINI_SL_WARM 0xe361 #define USB_PID_GRANDTEC_DVBT_USB2_COLD 0x0bc6 #define USB_PID_GRANDTEC_DVBT_USB2_WARM 0x0bc7 +#define USB_PID_WINFAST_DTV2000DS 0x6a04 #define USB_PID_WINFAST_DTV_DONGLE_COLD 0x6025 #define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026 #define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00 @@ -290,5 +295,7 @@ #define USB_PID_FRIIO_WHITE 0x0001 #define USB_PID_TVWAY_PLUS 0x0002 #define USB_PID_SVEON_STV20 0xe39d - +#define USB_PID_AZUREWAVE_AZ6027 0x3275 +#define USB_PID_TERRATEC_DVBS2CI 0x3275 +#define USB_PID_TECHNISAT_USB2_HDCI 0x0002 #endif diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/drivers/media/dvb/dvb-usb/dvb-usb-init.c index e331db8c77b2..5d91f70d2d2d 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-init.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-init.c @@ -243,7 +243,7 @@ int dvb_usb_device_init(struct usb_interface *intf, d = kzalloc(sizeof(struct dvb_usb_device),GFP_KERNEL); if (d == NULL) { err("no memory for 'struct dvb_usb_device'"); - return ret; + return -ENOMEM; } d->udev = udev; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c index 6b5ded9e7d5d..a03ef7efec9a 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c @@ -107,6 +107,7 @@ static void dvb_usb_read_remote_control(struct work_struct *work) case REMOTE_KEY_REPEAT: deb_rc("key repeated\n"); input_event(d->rc_input_dev, EV_KEY, event, 1); + input_sync(d->rc_input_dev); input_event(d->rc_input_dev, EV_KEY, d->last_event, 0); input_sync(d->rc_input_dev); break; diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c index 64132c0cf80d..accc65509b07 100644 --- a/drivers/media/dvb/dvb-usb/dw2102.c +++ b/drivers/media/dvb/dvb-usb/dw2102.c @@ -1,6 +1,7 @@ /* DVB USB framework compliant Linux driver for the * DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C 3101, -* TeVii S600, S630, S650 Cards +* TeVii S600, S630, S650, +* Prof 1100, 7500 Cards * Copyright (C) 2008,2009 Igor M. Liplianin (liplianin@me.by) * * This program is free software; you can redistribute it and/or modify it @@ -469,11 +470,13 @@ static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) { struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct usb_device *udev; int ret = 0; int len, i, j; if (!d) return -ENODEV; + udev = d->udev; if (mutex_lock_interruptible(&d->i2c_mutex) < 0) return -EAGAIN; @@ -488,8 +491,13 @@ static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], } case (DW2102_VOLTAGE_CTRL): { u8 obuf[2]; + + obuf[0] = 1; + obuf[1] = msg[j].buf[1];/* off-on */ + ret = dw210x_op_rw(d->udev, 0x8a, 0, 0, + obuf, 2, DW210X_WRITE_MSG); obuf[0] = 3; - obuf[1] = msg[j].buf[0]; + obuf[1] = msg[j].buf[0];/* 13v-18v */ ret = dw210x_op_rw(d->udev, 0x8a, 0, 0, obuf, 2, DW210X_WRITE_MSG); break; @@ -527,6 +535,17 @@ static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i += 16; len -= 16; } while (len > 0); + } else if ((udev->descriptor.idProduct == 0x7500) + && (j < (num - 1))) { + /* write register addr before read */ + u8 obuf[msg[j].len + 2]; + obuf[0] = msg[j + 1].len; + obuf[1] = (msg[j].addr << 1); + memcpy(obuf + 2, msg[j].buf, msg[j].len); + ret = dw210x_op_rw(d->udev, 0x92, 0, 0, + obuf, msg[j].len + 2, + DW210X_WRITE_MSG); + break; } else { /* write registers */ u8 obuf[msg[j].len + 2]; @@ -651,18 +670,25 @@ static int s6x0_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) static int dw210x_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { - static u8 command_13v[1] = {0x00}; - static u8 command_18v[1] = {0x01}; - struct i2c_msg msg[] = { - {.addr = DW2102_VOLTAGE_CTRL, .flags = 0, - .buf = command_13v, .len = 1}, + static u8 command_13v[] = {0x00, 0x01}; + static u8 command_18v[] = {0x01, 0x01}; + static u8 command_off[] = {0x00, 0x00}; + struct i2c_msg msg = { + .addr = DW2102_VOLTAGE_CTRL, + .flags = 0, + .buf = command_off, + .len = 2, }; struct dvb_usb_adapter *udev_adap = (struct dvb_usb_adapter *)(fe->dvb->priv); if (voltage == SEC_VOLTAGE_18) - msg[0].buf = command_18v; - i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1); + msg.buf = command_18v; + else if (voltage == SEC_VOLTAGE_13) + msg.buf = command_13v; + + i2c_transfer(&udev_adap->dev->i2c_adap, &msg, 1); + return 0; } @@ -735,6 +761,18 @@ static struct stv6110_config dw2104_stv6110_config = { .clk_div = 1, }; +static struct stv0900_config prof_7500_stv0900_config = { + .demod_address = 0x6a, + .demod_mode = 0, + .xtal = 27000000, + .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ + .diseqc_mode = 2,/* 2/3 PWM */ + .tun1_maddress = 0,/* 0x60 */ + .tun1_adc = 0,/* 2 Vpp */ + .path1_mode = 3, + .tun1_type = 3, +}; + static int dw2104_frontend_attach(struct dvb_usb_adapter *d) { struct dvb_tuner_ops *tuner_ops = NULL; @@ -882,6 +920,19 @@ static int s6x0_frontend_attach(struct dvb_usb_adapter *d) return -EIO; } +static int prof_7500_frontend_attach(struct dvb_usb_adapter *d) +{ + d->fe = dvb_attach(stv0900_attach, &prof_7500_stv0900_config, + &d->dev->i2c_adap, 0); + if (d->fe == NULL) + return -EIO; + d->fe->ops.set_voltage = dw210x_set_voltage; + + info("Attached STV0900+STB6100A!\n"); + + return 0; +} + static int dw2102_tuner_attach(struct dvb_usb_adapter *adap) { dvb_attach(dvb_pll_attach, adap->fe, 0x60, @@ -1073,6 +1124,7 @@ static struct usb_device_id dw2102_table[] = { {USB_DEVICE(0x9022, USB_PID_TEVII_S630)}, {USB_DEVICE(0x3011, USB_PID_PROF_1100)}, {USB_DEVICE(0x9022, USB_PID_TEVII_S660)}, + {USB_DEVICE(0x3034, 0x7500)}, { } }; @@ -1387,9 +1439,30 @@ static struct dvb_usb_device_properties s6x0_properties = { } }; +struct dvb_usb_device_properties *p7500; +static struct dvb_usb_device_description d7500 = { + "Prof 7500 USB DVB-S2", + {&dw2102_table[9], NULL}, + {NULL}, +}; + static int dw2102_probe(struct usb_interface *intf, const struct usb_device_id *id) { + + p7500 = kzalloc(sizeof(struct dvb_usb_device_properties), GFP_KERNEL); + if (!p7500) + return -ENOMEM; + /* copy default structure */ + memcpy(p7500, &s6x0_properties, + sizeof(struct dvb_usb_device_properties)); + /* fill only different fields */ + p7500->firmware = "dvb-usb-p7500.fw"; + p7500->devices[0] = d7500; + p7500->rc_key_map = tbs_rc_keys; + p7500->rc_key_map_size = ARRAY_SIZE(tbs_rc_keys); + p7500->adapter->frontend_attach = prof_7500_frontend_attach; + if (0 == dvb_usb_device_init(intf, &dw2102_properties, THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &dw2104_properties, @@ -1397,6 +1470,8 @@ static int dw2102_probe(struct usb_interface *intf, 0 == dvb_usb_device_init(intf, &dw3101_properties, THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &s6x0_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, p7500, THIS_MODULE, NULL, adapter_nr)) return 0; @@ -1431,6 +1506,6 @@ MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by"); MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104," " DVB-C 3101 USB2.0," " TeVii S600, S630, S650, S660 USB2.0," - " Prof 1100 USB2.0 devices"); + " Prof 1100, 7500 USB2.0 devices"); MODULE_VERSION("0.1"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c index ebb7b9fd115b..d14bd227b502 100644 --- a/drivers/media/dvb/dvb-usb/friio-fe.c +++ b/drivers/media/dvb/dvb-usb/friio-fe.c @@ -366,7 +366,7 @@ static u8 init_code[][2] = { {0x76, 0x0C}, }; -const static int init_code_len = sizeof(init_code) / sizeof(u8[2]); +static const int init_code_len = sizeof(init_code) / sizeof(u8[2]); static int jdvbt90502_init(struct dvb_frontend *fe) { diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c index ef9b7bed13ff..737ffa36ac9c 100644 --- a/drivers/media/dvb/dvb-usb/m920x.c +++ b/drivers/media/dvb/dvb-usb/m920x.c @@ -16,6 +16,9 @@ #include "qt1010.h" #include "tda1004x.h" #include "tda827x.h" + +#include <media/tuner.h> +#include "tuner-simple.h" #include <asm/unaligned.h> /* debug */ @@ -158,11 +161,14 @@ static int m920x_rc_query(struct dvb_usb_device *d, u32 *event, int *state) case 0x93: case 0x92: + case 0x83: /* pinnacle PCTV310e */ + case 0x82: m->rep_count = 0; *state = REMOTE_KEY_PRESSED; goto unlock; case 0x91: + case 0x81: /* pinnacle PCTV310e */ /* prevent immediate auto-repeat */ if (++m->rep_count > 2) *state = REMOTE_KEY_REPEAT; @@ -546,6 +552,14 @@ static int m920x_tda8275_61_tuner_attach(struct dvb_usb_adapter *adap) return 0; } +static int m920x_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap) +{ + dvb_attach(simple_tuner_attach, adap->fe, + &adap->dev->i2c_adap, 0x61, + TUNER_PHILIPS_FMD1216ME_MK3); + return 0; +} + /* device-specific initialization */ static struct m920x_inits megasky_rc_init [] = { { M9206_RC_INIT2, 0xa8 }, @@ -562,6 +576,18 @@ static struct m920x_inits tvwalkertwin_rc_init [] = { { } /* terminating entry */ }; +static struct m920x_inits pinnacle310e_init[] = { + /* without these the tuner don't work */ + { 0xff20, 0x9b }, + { 0xff22, 0x70 }, + + /* rc settings */ + { 0xff50, 0x80 }, + { M9206_RC_INIT1, 0x00 }, + { M9206_RC_INIT2, 0xff }, + { } /* terminating entry */ +}; + /* ir keymaps */ static struct dvb_usb_rc_key megasky_rc_keys [] = { { 0x0012, KEY_POWER }, @@ -602,11 +628,68 @@ static struct dvb_usb_rc_key tvwalkertwin_rc_keys [] = { { 0x001e, KEY_VOLUMEUP }, }; +static struct dvb_usb_rc_key pinnacle310e_rc_keys[] = { + { 0x16, KEY_POWER }, + { 0x17, KEY_FAVORITES }, + { 0x0f, KEY_TEXT }, + { 0x48, KEY_MEDIA }, /* preview */ + { 0x1c, KEY_EPG }, + { 0x04, KEY_LIST }, /* record list */ + { 0x03, KEY_1 }, + { 0x01, KEY_2 }, + { 0x06, KEY_3 }, + { 0x09, KEY_4 }, + { 0x1d, KEY_5 }, + { 0x1f, KEY_6 }, + { 0x0d, KEY_7 }, + { 0x19, KEY_8 }, + { 0x1b, KEY_9 }, + { 0x15, KEY_0 }, + { 0x0c, KEY_CANCEL }, + { 0x4a, KEY_CLEAR }, + { 0x13, KEY_BACK }, + { 0x00, KEY_TAB }, + { 0x4b, KEY_UP }, + { 0x4e, KEY_LEFT }, + { 0x52, KEY_RIGHT }, + { 0x51, KEY_DOWN }, + { 0x4f, KEY_ENTER }, /* could also be KEY_OK */ + { 0x1e, KEY_VOLUMEUP }, + { 0x0a, KEY_VOLUMEDOWN }, + { 0x05, KEY_CHANNELUP }, + { 0x02, KEY_CHANNELDOWN }, + { 0x11, KEY_RECORD }, + { 0x14, KEY_PLAY }, + { 0x4c, KEY_PAUSE }, + { 0x1a, KEY_STOP }, + { 0x40, KEY_REWIND }, + { 0x12, KEY_FASTFORWARD }, + { 0x41, KEY_PREVIOUSSONG }, /* Replay */ + { 0x42, KEY_NEXTSONG }, /* Skip */ + { 0x54, KEY_CAMERA }, /* Capture */ +/* { 0x50, KEY_SAP }, */ /* Sap */ + { 0x47, KEY_CYCLEWINDOWS }, /* Pip */ + { 0x4d, KEY_SCREEN }, /* FullScreen */ + { 0x08, KEY_SUBTITLE }, + { 0x0e, KEY_MUTE }, +/* { 0x49, KEY_LR }, */ /* L/R */ + { 0x07, KEY_SLEEP }, /* Hibernate */ + { 0x08, KEY_MEDIA }, /* A/V */ + { 0x0e, KEY_MENU }, /* Recall */ + { 0x45, KEY_ZOOMIN }, + { 0x46, KEY_ZOOMOUT }, + { 0x18, KEY_TV }, /* Red */ + { 0x53, KEY_VCR }, /* Green */ + { 0x5e, KEY_SAT }, /* Yellow */ + { 0x5f, KEY_PLAYER }, /* Blue */ +}; + /* DVB USB Driver stuff */ static struct dvb_usb_device_properties megasky_properties; static struct dvb_usb_device_properties digivox_mini_ii_properties; static struct dvb_usb_device_properties tvwalkertwin_properties; static struct dvb_usb_device_properties dposh_properties; +static struct dvb_usb_device_properties pinnacle_pctv310e_properties; static int m920x_probe(struct usb_interface *intf, const struct usb_device_id *id) @@ -652,6 +735,13 @@ static int m920x_probe(struct usb_interface *intf, goto found; } + ret = dvb_usb_device_init(intf, &pinnacle_pctv310e_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) { + rc_init_seq = pinnacle310e_init; + goto found; + } + return ret; } else { /* Another interface on a multi-tuner device */ @@ -682,6 +772,7 @@ static struct usb_device_id m920x_table [] = { USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM) }, { USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_COLD) }, { USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_WARM) }, + { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_PINNACLE_PCTV310E) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, m920x_table); @@ -895,6 +986,56 @@ static struct dvb_usb_device_properties dposh_properties = { } }; +static struct dvb_usb_device_properties pinnacle_pctv310e_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .download_firmware = NULL, + + .rc_interval = 100, + .rc_key_map = pinnacle310e_rc_keys, + .rc_key_map_size = ARRAY_SIZE(pinnacle310e_rc_keys), + .rc_query = m920x_rc_query, + + .size_of_priv = sizeof(struct m920x_state), + + .identify_state = m920x_identify_state, + .num_adapters = 1, + .adapter = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + + .pid_filter_count = 8, + .pid_filter = m920x_pid_filter, + .pid_filter_ctrl = m920x_pid_filter_ctrl, + + .frontend_attach = m920x_mt352_frontend_attach, + .tuner_attach = m920x_fmd1216me_tuner_attach, + + .stream = { + .type = USB_ISOC, + .count = 5, + .endpoint = 0x84, + .u = { + .isoc = { + .framesperurb = 128, + .framesize = 564, + .interval = 1, + } + } + }, + } }, + .i2c_algo = &m920x_i2c_algo, + + .num_device_descs = 1, + .devices = { + { "Pinnacle PCTV 310e", + { &m920x_table[6], NULL }, + { NULL }, + } + } +}; + static struct usb_driver m920x_driver = { .name = "dvb_usb_m920x", .probe = m920x_probe, diff --git a/drivers/media/dvb/dvb-usb/m920x.h b/drivers/media/dvb/dvb-usb/m920x.h index 37532890accd..3c061518ffc1 100644 --- a/drivers/media/dvb/dvb-usb/m920x.h +++ b/drivers/media/dvb/dvb-usb/m920x.h @@ -18,7 +18,7 @@ #define M9206_FW 0x30 #define M9206_MAX_FILTERS 8 -#define M9206_MAX_ADAPTERS 2 +#define M9206_MAX_ADAPTERS 4 /* sequences found in logs: diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/dvb/dvb-usb/opera1.c index d4e230941679..830557696ae6 100644 --- a/drivers/media/dvb/dvb-usb/opera1.c +++ b/drivers/media/dvb/dvb-usb/opera1.c @@ -138,7 +138,7 @@ static int opera1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], (msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0), msg[i].buf, msg[i].len - )!= msg[i].len)) { + )) != msg[i].len) { break; } if (dvb_usb_opera1_debug & 0x10) |