diff options
Diffstat (limited to 'drivers/irqchip/irq-realtek-rtl.c')
| -rw-r--r-- | drivers/irqchip/irq-realtek-rtl.c | 134 |
1 files changed, 61 insertions, 73 deletions
diff --git a/drivers/irqchip/irq-realtek-rtl.c b/drivers/irqchip/irq-realtek-rtl.c index 56bf502d9c67..2a349082af81 100644 --- a/drivers/irqchip/irq-realtek-rtl.c +++ b/drivers/irqchip/irq-realtek-rtl.c @@ -21,11 +21,33 @@ #define RTL_ICTL_IRR2 0x10 #define RTL_ICTL_IRR3 0x14 +#define RTL_ICTL_NUM_INPUTS 32 + #define REG(x) (realtek_ictl_base + x) static DEFINE_RAW_SPINLOCK(irq_lock); static void __iomem *realtek_ictl_base; +/* + * IRR0-IRR3 store 4 bits per interrupt, but Realtek uses inverted numbering, + * placing IRQ 31 in the first four bits. A routing value of '0' means the + * interrupt is left disconnected. Routing values {1..15} connect to output + * lines {0..14}. + */ +#define IRR_OFFSET(idx) (4 * (3 - (idx * 4) / 32)) +#define IRR_SHIFT(idx) ((idx * 4) % 32) + +static void write_irr(void __iomem *irr0, int idx, u32 value) +{ + unsigned int offset = IRR_OFFSET(idx); + unsigned int shift = IRR_SHIFT(idx); + u32 irr; + + irr = readl(irr0 + offset) & ~(0xf << shift); + irr |= (value & 0xf) << shift; + writel(irr, irr0 + offset); +} + static void realtek_ictl_unmask_irq(struct irq_data *i) { unsigned long flags; @@ -62,8 +84,14 @@ static struct irq_chip realtek_ictl_irq = { static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) { + unsigned long flags; + irq_set_chip_and_handler(irq, &realtek_ictl_irq, handle_level_irq); + raw_spin_lock_irqsave(&irq_lock, flags); + write_irr(REG(RTL_ICTL_IRR0), hw, 1); + raw_spin_unlock_irqrestore(&irq_lock, flags); + return 0; } @@ -95,90 +123,50 @@ out: chained_irq_exit(chip, desc); } -/* - * SoC interrupts are cascaded to MIPS CPU interrupts according to the - * interrupt-map in the device tree. Each SoC interrupt gets 4 bits for - * the CPU interrupt in an Interrupt Routing Register. Max 32 SoC interrupts - * thus go into 4 IRRs. A routing value of '0' means the interrupt is left - * disconnected. Routing values {1..15} connect to output lines {0..14}. - */ -static int __init map_interrupts(struct device_node *node, struct irq_domain *domain) -{ - struct device_node *cpu_ictl; - const __be32 *imap; - u32 imaplen, soc_int, cpu_int, tmp, regs[4]; - int ret, i, irr_regs[] = { - RTL_ICTL_IRR3, - RTL_ICTL_IRR2, - RTL_ICTL_IRR1, - RTL_ICTL_IRR0, - }; - u8 mips_irqs_set; - - ret = of_property_read_u32(node, "#address-cells", &tmp); - if (ret || tmp) - return -EINVAL; - - imap = of_get_property(node, "interrupt-map", &imaplen); - if (!imap || imaplen % 3) - return -EINVAL; - - mips_irqs_set = 0; - memset(regs, 0, sizeof(regs)); - for (i = 0; i < imaplen; i += 3 * sizeof(u32)) { - soc_int = be32_to_cpup(imap); - if (soc_int > 31) - return -EINVAL; - - cpu_ictl = of_find_node_by_phandle(be32_to_cpup(imap + 1)); - if (!cpu_ictl) - return -EINVAL; - ret = of_property_read_u32(cpu_ictl, "#interrupt-cells", &tmp); - of_node_put(cpu_ictl); - if (ret || tmp != 1) - return -EINVAL; - - cpu_int = be32_to_cpup(imap + 2); - if (cpu_int > 7 || cpu_int < 2) - return -EINVAL; - - if (!(mips_irqs_set & BIT(cpu_int))) { - irq_set_chained_handler_and_data(cpu_int, realtek_irq_dispatch, - domain); - mips_irqs_set |= BIT(cpu_int); - } - - /* Use routing values (1..6) for CPU interrupts (2..7) */ - regs[(soc_int * 4) / 32] |= (cpu_int - 1) << (soc_int * 4) % 32; - imap += 3; - } - - for (i = 0; i < 4; i++) - writel(regs[i], REG(irr_regs[i])); - - return 0; -} - static int __init realtek_rtl_of_init(struct device_node *node, struct device_node *parent) { + struct of_phandle_args oirq; struct irq_domain *domain; - int ret; + unsigned int soc_irq; + int parent_irq; realtek_ictl_base = of_iomap(node, 0); if (!realtek_ictl_base) return -ENXIO; - /* Disable all cascaded interrupts */ + /* Disable all cascaded interrupts and clear routing */ writel(0, REG(RTL_ICTL_GIMR)); + for (soc_irq = 0; soc_irq < RTL_ICTL_NUM_INPUTS; soc_irq++) + write_irr(REG(RTL_ICTL_IRR0), soc_irq, 0); + + if (WARN_ON(!of_irq_count(node))) { + /* + * If DT contains no parent interrupts, assume MIPS CPU IRQ 2 + * (HW0) is connected to the first output. This is the case for + * all known hardware anyway. "interrupt-map" is deprecated, so + * don't bother trying to parse that. + */ + oirq.np = of_find_compatible_node(NULL, NULL, "mti,cpu-interrupt-controller"); + oirq.args_count = 1; + oirq.args[0] = 2; + + parent_irq = irq_create_of_mapping(&oirq); + + of_node_put(oirq.np); + } else { + parent_irq = of_irq_get(node, 0); + } - domain = irq_domain_add_simple(node, 32, 0, - &irq_domain_ops, NULL); + if (parent_irq < 0) + return parent_irq; + else if (!parent_irq) + return -ENODEV; - ret = map_interrupts(node, domain); - if (ret) { - pr_err("invalid interrupt map\n"); - return ret; - } + domain = irq_domain_add_linear(node, RTL_ICTL_NUM_INPUTS, &irq_domain_ops, NULL); + if (!domain) + return -ENOMEM; + + irq_set_chained_handler_and_data(parent_irq, realtek_irq_dispatch, domain); return 0; } |