diff options
Diffstat (limited to 'drivers/input')
| -rw-r--r-- | drivers/input/gameport/gameport.c | 12 | ||||
| -rw-r--r-- | drivers/input/keyboard/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/input/keyboard/cros_ec_keyb.c | 54 | ||||
| -rw-r--r-- | drivers/input/misc/da9055_onkey.c | 2 | ||||
| -rw-r--r-- | drivers/input/mouse/bcm5974.c | 6 | ||||
| -rw-r--r-- | drivers/input/serio/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/input/serio/altera_ps2.c | 1 | ||||
| -rw-r--r-- | drivers/input/serio/serio.c | 21 | ||||
| -rw-r--r-- | drivers/input/touchscreen/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/input/touchscreen/ti_am335x_tsc.c | 288 |
10 files changed, 257 insertions, 136 deletions
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c index da739d9d1905..922a7fea2ce6 100644 --- a/drivers/input/gameport/gameport.c +++ b/drivers/input/gameport/gameport.c @@ -639,16 +639,18 @@ EXPORT_SYMBOL(gameport_unregister_port); * Gameport driver operations */ -static ssize_t gameport_driver_show_description(struct device_driver *drv, char *buf) +static ssize_t description_show(struct device_driver *drv, char *buf) { struct gameport_driver *driver = to_gameport_driver(drv); return sprintf(buf, "%s\n", driver->description ? driver->description : "(none)"); } +static DRIVER_ATTR_RO(description); -static struct driver_attribute gameport_driver_attrs[] = { - __ATTR(description, S_IRUGO, gameport_driver_show_description, NULL), - __ATTR_NULL +static struct attribute *gameport_driver_attrs[] = { + &driver_attr_description.attr, + NULL }; +ATTRIBUTE_GROUPS(gameport_driver); static int gameport_driver_probe(struct device *dev) { @@ -749,7 +751,7 @@ static int gameport_bus_match(struct device *dev, struct device_driver *drv) static struct bus_type gameport_bus = { .name = "gameport", .dev_attrs = gameport_device_attrs, - .drv_attrs = gameport_driver_attrs, + .drv_groups = gameport_driver_groups, .match = gameport_bus_match, .probe = gameport_driver_probe, .remove = gameport_driver_remove, diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 269d4c3658cb..c1edd39bc5ba 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -224,7 +224,7 @@ config KEYBOARD_TCA6416 config KEYBOARD_TCA8418 tristate "TCA8418 Keypad Support" - depends on I2C && GENERIC_HARDIRQS + depends on I2C select INPUT_MATRIXKMAP help This driver implements basic keypad functionality @@ -303,7 +303,7 @@ config KEYBOARD_HP7XX config KEYBOARD_LM8323 tristate "LM8323 keypad chip" - depends on I2C && GENERIC_HARDIRQS + depends on I2C depends on LEDS_CLASS help If you say yes here you get support for the National Semiconductor diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c index 49557f27bfa6..7e8b0a52af25 100644 --- a/drivers/input/keyboard/cros_ec_keyb.c +++ b/drivers/input/keyboard/cros_ec_keyb.c @@ -206,33 +206,6 @@ static int cros_ec_keyb_work(struct notifier_block *nb, return NOTIFY_DONE; } -/* Clear any keys in the buffer */ -static void cros_ec_keyb_clear_keyboard(struct cros_ec_keyb *ckdev) -{ - uint8_t old_state[ckdev->cols]; - uint8_t new_state[ckdev->cols]; - unsigned long duration; - int i, ret; - - /* - * Keep reading until we see that the scan state does not change. - * That indicates that we are done. - * - * Assume that the EC keyscan buffer is at most 32 deep. - */ - duration = jiffies; - ret = cros_ec_keyb_get_state(ckdev, new_state); - for (i = 1; !ret && i < 32; i++) { - memcpy(old_state, new_state, sizeof(old_state)); - ret = cros_ec_keyb_get_state(ckdev, new_state); - if (0 == memcmp(old_state, new_state, sizeof(old_state))) - break; - } - duration = jiffies - duration; - dev_info(ckdev->dev, "Discarded %d keyscan(s) in %dus\n", i, - jiffies_to_usecs(duration)); -} - static int cros_ec_keyb_probe(struct platform_device *pdev) { struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent); @@ -299,6 +272,33 @@ static int cros_ec_keyb_probe(struct platform_device *pdev) } #ifdef CONFIG_PM_SLEEP +/* Clear any keys in the buffer */ +static void cros_ec_keyb_clear_keyboard(struct cros_ec_keyb *ckdev) +{ + uint8_t old_state[ckdev->cols]; + uint8_t new_state[ckdev->cols]; + unsigned long duration; + int i, ret; + + /* + * Keep reading until we see that the scan state does not change. + * That indicates that we are done. + * + * Assume that the EC keyscan buffer is at most 32 deep. + */ + duration = jiffies; + ret = cros_ec_keyb_get_state(ckdev, new_state); + for (i = 1; !ret && i < 32; i++) { + memcpy(old_state, new_state, sizeof(old_state)); + ret = cros_ec_keyb_get_state(ckdev, new_state); + if (0 == memcmp(old_state, new_state, sizeof(old_state))) + break; + } + duration = jiffies - duration; + dev_info(ckdev->dev, "Discarded %d keyscan(s) in %dus\n", i, + jiffies_to_usecs(duration)); +} + static int cros_ec_keyb_resume(struct device *dev) { struct cros_ec_keyb *ckdev = dev_get_drvdata(dev); diff --git a/drivers/input/misc/da9055_onkey.c b/drivers/input/misc/da9055_onkey.c index ee6ae3a00174..a0af8b2506ce 100644 --- a/drivers/input/misc/da9055_onkey.c +++ b/drivers/input/misc/da9055_onkey.c @@ -36,7 +36,7 @@ static void da9055_onkey_query(struct da9055_onkey *onkey) } else { key_stat &= DA9055_NOKEY_STS; /* - * Onkey status bit is cleared when onkey button is relased. + * Onkey status bit is cleared when onkey button is released. */ if (!key_stat) { input_report_key(onkey->input, KEY_POWER, 0); diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 4ef4d5e198ae..a73f9618b0ad 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -89,9 +89,9 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO 0x025a #define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS 0x025b /* MacbookAir6,2 (unibody, June 2013) */ -#define USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI 0x0291 -#define USB_DEVICE_ID_APPLE_WELLSPRING8_ISO 0x0292 -#define USB_DEVICE_ID_APPLE_WELLSPRING8_JIS 0x0293 +#define USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI 0x0290 +#define USB_DEVICE_ID_APPLE_WELLSPRING8_ISO 0x0291 +#define USB_DEVICE_ID_APPLE_WELLSPRING8_JIS 0x0292 #define BCM5974_DEVICE(prod) { \ .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \ diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 1e691a3a79cb..33b3e88fe4a2 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -239,7 +239,6 @@ config SERIO_PS2MULT config SERIO_ARC_PS2 tristate "ARC PS/2 support" - depends on GENERIC_HARDIRQS help Say Y here if you have an ARC FPGA platform with a PS/2 controller in it. diff --git a/drivers/input/serio/altera_ps2.c b/drivers/input/serio/altera_ps2.c index a0a2657e31ff..4777a73cd390 100644 --- a/drivers/input/serio/altera_ps2.c +++ b/drivers/input/serio/altera_ps2.c @@ -176,6 +176,7 @@ static int altera_ps2_remove(struct platform_device *pdev) #ifdef CONFIG_OF static const struct of_device_id altera_ps2_match[] = { { .compatible = "ALTR,ps2-1.0", }, + { .compatible = "altr,ps2-1.0", }, {}, }; MODULE_DEVICE_TABLE(of, altera_ps2_match); diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c index 25fc5971f426..2b56855c2c77 100644 --- a/drivers/input/serio/serio.c +++ b/drivers/input/serio/serio.c @@ -732,19 +732,20 @@ EXPORT_SYMBOL(serio_unregister_child_port); * Serio driver operations */ -static ssize_t serio_driver_show_description(struct device_driver *drv, char *buf) +static ssize_t description_show(struct device_driver *drv, char *buf) { struct serio_driver *driver = to_serio_driver(drv); return sprintf(buf, "%s\n", driver->description ? driver->description : "(none)"); } +static DRIVER_ATTR_RO(description); -static ssize_t serio_driver_show_bind_mode(struct device_driver *drv, char *buf) +static ssize_t bind_mode_show(struct device_driver *drv, char *buf) { struct serio_driver *serio_drv = to_serio_driver(drv); return sprintf(buf, "%s\n", serio_drv->manual_bind ? "manual" : "auto"); } -static ssize_t serio_driver_set_bind_mode(struct device_driver *drv, const char *buf, size_t count) +static ssize_t bind_mode_store(struct device_driver *drv, const char *buf, size_t count) { struct serio_driver *serio_drv = to_serio_driver(drv); int retval; @@ -760,14 +761,14 @@ static ssize_t serio_driver_set_bind_mode(struct device_driver *drv, const char return retval; } +static DRIVER_ATTR_RW(bind_mode); - -static struct driver_attribute serio_driver_attrs[] = { - __ATTR(description, S_IRUGO, serio_driver_show_description, NULL), - __ATTR(bind_mode, S_IWUSR | S_IRUGO, - serio_driver_show_bind_mode, serio_driver_set_bind_mode), - __ATTR_NULL +static struct attribute *serio_driver_attrs[] = { + &driver_attr_description.attr, + &driver_attr_bind_mode.attr, + NULL, }; +ATTRIBUTE_GROUPS(serio_driver); static int serio_driver_probe(struct device *dev) { @@ -996,7 +997,7 @@ EXPORT_SYMBOL(serio_interrupt); static struct bus_type serio_bus = { .name = "serio", .dev_attrs = serio_device_attrs, - .drv_attrs = serio_driver_attrs, + .drv_groups = serio_driver_groups, .match = serio_bus_match, .uevent = serio_uevent, .probe = serio_driver_probe, diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 3b9758b5f4d7..e09ec67957a3 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -389,7 +389,7 @@ config TOUCHSCREEN_MCS5000 config TOUCHSCREEN_MMS114 tristate "MELFAS MMS114 touchscreen" - depends on I2C && GENERIC_HARDIRQS + depends on I2C help Say Y here if you have the MELFAS MMS114 touchscreen controller chip in your system. @@ -845,7 +845,7 @@ config TOUCHSCREEN_TSC_SERIO config TOUCHSCREEN_TSC2005 tristate "TSC2005 based touchscreens" - depends on SPI_MASTER && GENERIC_HARDIRQS + depends on SPI_MASTER help Say Y here if you have a TSC2005 based touchscreen. diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c index 50fb1293874e..e1c5300cacfc 100644 --- a/drivers/input/touchscreen/ti_am335x_tsc.c +++ b/drivers/input/touchscreen/ti_am335x_tsc.c @@ -24,8 +24,9 @@ #include <linux/clk.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/input/ti_am335x_tsc.h> #include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/mfd/ti_am335x_tscadc.h> @@ -33,6 +34,13 @@ #define SEQ_SETTLE 275 #define MAX_12BIT ((1 << 12) - 1) +static const int config_pins[] = { + STEPCONFIG_XPP, + STEPCONFIG_XNN, + STEPCONFIG_YPP, + STEPCONFIG_YNN, +}; + struct titsc { struct input_dev *input; struct ti_tscadc_dev *mfd_tscadc; @@ -40,7 +48,10 @@ struct titsc { unsigned int wires; unsigned int x_plate_resistance; bool pen_down; - int steps_to_configure; + int coordinate_readouts; + u32 config_inp[4]; + u32 bit_xp, bit_xn, bit_yp, bit_yn; + u32 inp_xp, inp_xn, inp_yp, inp_yn; }; static unsigned int titsc_readl(struct titsc *ts, unsigned int reg) @@ -54,92 +65,153 @@ static void titsc_writel(struct titsc *tsc, unsigned int reg, writel(val, tsc->mfd_tscadc->tscadc_base + reg); } +static int titsc_config_wires(struct titsc *ts_dev) +{ + u32 analog_line[4]; + u32 wire_order[4]; + int i, bit_cfg; + + for (i = 0; i < 4; i++) { + /* + * Get the order in which TSC wires are attached + * w.r.t. each of the analog input lines on the EVM. + */ + analog_line[i] = (ts_dev->config_inp[i] & 0xF0) >> 4; + wire_order[i] = ts_dev->config_inp[i] & 0x0F; + if (WARN_ON(analog_line[i] > 7)) + return -EINVAL; + if (WARN_ON(wire_order[i] > ARRAY_SIZE(config_pins))) + return -EINVAL; + } + + for (i = 0; i < 4; i++) { + int an_line; + int wi_order; + + an_line = analog_line[i]; + wi_order = wire_order[i]; + bit_cfg = config_pins[wi_order]; + if (bit_cfg == 0) + return -EINVAL; + switch (wi_order) { + case 0: + ts_dev->bit_xp = bit_cfg; + ts_dev->inp_xp = an_line; + break; + + case 1: + ts_dev->bit_xn = bit_cfg; + ts_dev->inp_xn = an_line; + break; + + case 2: + ts_dev->bit_yp = bit_cfg; + ts_dev->inp_yp = an_line; + break; + case 3: + ts_dev->bit_yn = bit_cfg; + ts_dev->inp_yn = an_line; + break; + } + } + return 0; +} + static void titsc_step_config(struct titsc *ts_dev) { unsigned int config; - int i, total_steps; - - /* Configure the Step registers */ - total_steps = 2 * ts_dev->steps_to_configure; + int i; + int end_step; + u32 stepenable; config = STEPCONFIG_MODE_HWSYNC | - STEPCONFIG_AVG_16 | STEPCONFIG_XPP; + STEPCONFIG_AVG_16 | ts_dev->bit_xp; switch (ts_dev->wires) { case 4: - config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN; + config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn; break; case 5: - config |= STEPCONFIG_YNN | - STEPCONFIG_INP_AN4 | STEPCONFIG_XNN | - STEPCONFIG_YPP; + config |= ts_dev->bit_yn | + STEPCONFIG_INP_AN4 | ts_dev->bit_xn | + ts_dev->bit_yp; break; case 8: - config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN; + config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn; break; } - for (i = 1; i <= ts_dev->steps_to_configure; i++) { + /* 1 … coordinate_readouts is for X */ + end_step = ts_dev->coordinate_readouts; + for (i = 0; i < end_step; i++) { titsc_writel(ts_dev, REG_STEPCONFIG(i), config); titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); } config = 0; config = STEPCONFIG_MODE_HWSYNC | - STEPCONFIG_AVG_16 | STEPCONFIG_YNN | - STEPCONFIG_INM_ADCREFM | STEPCONFIG_FIFO1; + STEPCONFIG_AVG_16 | ts_dev->bit_yn | + STEPCONFIG_INM_ADCREFM; switch (ts_dev->wires) { case 4: - config |= STEPCONFIG_YPP; + config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp); break; case 5: - config |= STEPCONFIG_XPP | STEPCONFIG_INP_AN4 | - STEPCONFIG_XNP | STEPCONFIG_YPN; + config |= ts_dev->bit_xp | STEPCONFIG_INP_AN4 | + ts_dev->bit_xn | ts_dev->bit_yp; break; case 8: - config |= STEPCONFIG_YPP; + config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp); break; } - for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) { + /* coordinate_readouts … coordinate_readouts * 2 is for Y */ + end_step = ts_dev->coordinate_readouts * 2; + for (i = ts_dev->coordinate_readouts; i < end_step; i++) { titsc_writel(ts_dev, REG_STEPCONFIG(i), config); titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); } - config = 0; /* Charge step configuration */ - config = STEPCONFIG_XPP | STEPCONFIG_YNN | + config = ts_dev->bit_xp | ts_dev->bit_yn | STEPCHARGE_RFP_XPUL | STEPCHARGE_RFM_XNUR | - STEPCHARGE_INM_AN1 | STEPCHARGE_INP_AN1; + STEPCHARGE_INM_AN1 | STEPCHARGE_INP(ts_dev->inp_yp); titsc_writel(ts_dev, REG_CHARGECONFIG, config); titsc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY); - config = 0; - /* Configure to calculate pressure */ + /* coordinate_readouts * 2 … coordinate_readouts * 2 + 2 is for Z */ config = STEPCONFIG_MODE_HWSYNC | - STEPCONFIG_AVG_16 | STEPCONFIG_YPP | - STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM; - titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 1), config); - titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 1), + STEPCONFIG_AVG_16 | ts_dev->bit_yp | + ts_dev->bit_xn | STEPCONFIG_INM_ADCREFM | + STEPCONFIG_INP(ts_dev->inp_xp); + titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config); + titsc_writel(ts_dev, REG_STEPDELAY(end_step), STEPCONFIG_OPENDLY); - config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1; - titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 2), config); - titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 2), + end_step++; + config |= STEPCONFIG_INP(ts_dev->inp_yn); + titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config); + titsc_writel(ts_dev, REG_STEPDELAY(end_step), STEPCONFIG_OPENDLY); - titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC); + /* The steps1 … end and bit 0 for TS_Charge */ + stepenable = (1 << (end_step + 2)) - 1; + am335x_tsc_se_set(ts_dev->mfd_tscadc, stepenable); } static void titsc_read_coordinates(struct titsc *ts_dev, - unsigned int *x, unsigned int *y) + u32 *x, u32 *y, u32 *z1, u32 *z2) { unsigned int fifocount = titsc_readl(ts_dev, REG_FIFO0CNT); unsigned int prev_val_x = ~0, prev_val_y = ~0; unsigned int prev_diff_x = ~0, prev_diff_y = ~0; unsigned int read, diff; unsigned int i, channel; + unsigned int creads = ts_dev->coordinate_readouts; + *z1 = *z2 = 0; + if (fifocount % (creads * 2 + 2)) + fifocount -= fifocount % (creads * 2 + 2); /* * Delta filter is used to remove large variations in sampled * values from ADC. The filter tries to predict where the next @@ -148,32 +220,32 @@ static void titsc_read_coordinates(struct titsc *ts_dev, * algorithm compares the difference with that of a present value, * if true the value is reported to the sub system. */ - for (i = 0; i < fifocount - 1; i++) { + for (i = 0; i < fifocount; i++) { read = titsc_readl(ts_dev, REG_FIFO0); - channel = read & 0xf0000; - channel = channel >> 0x10; - if ((channel >= 0) && (channel < ts_dev->steps_to_configure)) { - read &= 0xfff; + + channel = (read & 0xf0000) >> 16; + read &= 0xfff; + if (channel < creads) { diff = abs(read - prev_val_x); if (diff < prev_diff_x) { prev_diff_x = diff; *x = read; } prev_val_x = read; - } - read = titsc_readl(ts_dev, REG_FIFO1); - channel = read & 0xf0000; - channel = channel >> 0x10; - if ((channel >= ts_dev->steps_to_configure) && - (channel < (2 * ts_dev->steps_to_configure - 1))) { - read &= 0xfff; + } else if (channel < creads * 2) { diff = abs(read - prev_val_y); if (diff < prev_diff_y) { prev_diff_y = diff; *y = read; } prev_val_y = read; + + } else if (channel < creads * 2 + 1) { + *z1 = read; + + } else if (channel < creads * 2 + 2) { + *z2 = read; } } } @@ -186,23 +258,11 @@ static irqreturn_t titsc_irq(int irq, void *dev) unsigned int x = 0, y = 0; unsigned int z1, z2, z; unsigned int fsm; - unsigned int fifo1count, fifo0count; - int i; status = titsc_readl(ts_dev, REG_IRQSTATUS); if (status & IRQENB_FIFO0THRES) { - titsc_read_coordinates(ts_dev, &x, &y); - z1 = titsc_readl(ts_dev, REG_FIFO0) & 0xfff; - z2 = titsc_readl(ts_dev, REG_FIFO1) & 0xfff; - - fifo1count = titsc_readl(ts_dev, REG_FIFO1CNT); - for (i = 0; i < fifo1count; i++) - titsc_readl(ts_dev, REG_FIFO1); - - fifo0count = titsc_readl(ts_dev, REG_FIFO0CNT); - for (i = 0; i < fifo0count; i++) - titsc_readl(ts_dev, REG_FIFO0); + titsc_read_coordinates(ts_dev, &x, &y, &z1, &z2); if (ts_dev->pen_down && z1 != 0 && z2 != 0) { /* @@ -210,10 +270,10 @@ static irqreturn_t titsc_irq(int irq, void *dev) * Resistance(touch) = x plate resistance * * x postion/4096 * ((z2 / z1) - 1) */ - z = z2 - z1; + z = z1 - z2; z *= x; z *= ts_dev->x_plate_resistance; - z /= z1; + z /= z2; z = (z + 2047) >> 12; if (z <= MAX_12BIT) { @@ -248,10 +308,53 @@ static irqreturn_t titsc_irq(int irq, void *dev) irqclr |= IRQENB_PENUP; } - titsc_writel(ts_dev, REG_IRQSTATUS, irqclr); + if (status & IRQENB_HW_PEN) { + + titsc_writel(ts_dev, REG_IRQWAKEUP, 0x00); + titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN); + } - titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC); - return IRQ_HANDLED; + if (irqclr) { + titsc_writel(ts_dev, REG_IRQSTATUS, irqclr); + am335x_tsc_se_update(ts_dev->mfd_tscadc); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static int titsc_parse_dt(struct platform_device *pdev, + struct titsc *ts_dev) +{ + struct device_node *node = pdev->dev.of_node; + int err; + + if (!node) + return -EINVAL; + + err = of_property_read_u32(node, "ti,wires", &ts_dev->wires); + if (err < 0) + return err; + switch (ts_dev->wires) { + case 4: + case 5: + case 8: + break; + default: + return -EINVAL; + } + + err = of_property_read_u32(node, "ti,x-plate-resistance", + &ts_dev->x_plate_resistance); + if (err < 0) + return err; + + err = of_property_read_u32(node, "ti,coordiante-readouts", + &ts_dev->coordinate_readouts); + if (err < 0) + return err; + + return of_property_read_u32_array(node, "ti,wire-config", + ts_dev->config_inp, ARRAY_SIZE(ts_dev->config_inp)); } /* @@ -262,17 +365,9 @@ static int titsc_probe(struct platform_device *pdev) { struct titsc *ts_dev; struct input_dev *input_dev; - struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data; - struct mfd_tscadc_board *pdata; + struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev); int err; - pdata = tscadc_dev->dev->platform_data; - - if (!pdata) { - dev_err(&pdev->dev, "Could not find platform data\n"); - return -EINVAL; - } - /* Allocate memory for device */ ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL); input_dev = input_allocate_device(); @@ -286,9 +381,12 @@ static int titsc_probe(struct platform_device *pdev) ts_dev->mfd_tscadc = tscadc_dev; ts_dev->input = input_dev; ts_dev->irq = tscadc_dev->irq; - ts_dev->wires = pdata->tsc_init->wires; - ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance; - ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure; + + err = titsc_parse_dt(pdev, ts_dev); + if (err) { + dev_err(&pdev->dev, "Could not find valid DT data.\n"); + goto err_free_mem; + } err = request_irq(ts_dev->irq, titsc_irq, 0, pdev->dev.driver->name, ts_dev); @@ -298,8 +396,14 @@ static int titsc_probe(struct platform_device *pdev) } titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES); + err = titsc_config_wires(ts_dev); + if (err) { + dev_err(&pdev->dev, "wrong i/p wire configuration\n"); + goto err_free_irq; + } titsc_step_config(ts_dev); - titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure); + titsc_writel(ts_dev, REG_FIFO0THR, + ts_dev->coordinate_readouts * 2 + 2 - 1); input_dev->name = "ti-tsc"; input_dev->dev.parent = &pdev->dev; @@ -329,11 +433,16 @@ err_free_mem: static int titsc_remove(struct platform_device *pdev) { - struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data; - struct titsc *ts_dev = tscadc_dev->tsc; + struct titsc *ts_dev = platform_get_drvdata(pdev); + u32 steps; free_irq(ts_dev->irq, ts_dev); + /* total steps followed by the enable mask */ + steps = 2 * ts_dev->coordinate_readouts + 2; + steps = (1 << steps) - 1; + am335x_tsc_se_clr(ts_dev->mfd_tscadc, steps); + input_unregister_device(ts_dev->input); kfree(ts_dev); @@ -343,10 +452,11 @@ static int titsc_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int titsc_suspend(struct device *dev) { - struct ti_tscadc_dev *tscadc_dev = dev->platform_data; - struct titsc *ts_dev = tscadc_dev->tsc; + struct titsc *ts_dev = dev_get_drvdata(dev); + struct ti_tscadc_dev *tscadc_dev; unsigned int idle; + tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev)); if (device_may_wakeup(tscadc_dev->dev)) { idle = titsc_readl(ts_dev, REG_IRQENABLE); titsc_writel(ts_dev, REG_IRQENABLE, @@ -358,9 +468,10 @@ static int titsc_suspend(struct device *dev) static int titsc_resume(struct device *dev) { - struct ti_tscadc_dev *tscadc_dev = dev->platform_data; - struct titsc *ts_dev = tscadc_dev->tsc; + struct titsc *ts_dev = dev_get_drvdata(dev); + struct ti_tscadc_dev *tscadc_dev; + tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev)); if (device_may_wakeup(tscadc_dev->dev)) { titsc_writel(ts_dev, REG_IRQWAKEUP, 0x00); @@ -368,7 +479,7 @@ static int titsc_resume(struct device *dev) } titsc_step_config(ts_dev); titsc_writel(ts_dev, REG_FIFO0THR, - ts_dev->steps_to_configure); + ts_dev->coordinate_readouts * 2 + 2 - 1); return 0; } @@ -381,13 +492,20 @@ static const struct dev_pm_ops titsc_pm_ops = { #define TITSC_PM_OPS NULL #endif +static const struct of_device_id ti_tsc_dt_ids[] = { + { .compatible = "ti,am3359-tsc", }, + { } +}; +MODULE_DEVICE_TABLE(of, ti_tsc_dt_ids); + static struct platform_driver ti_tsc_driver = { .probe = titsc_probe, .remove = titsc_remove, .driver = { - .name = "tsc", + .name = "TI-am335x-tsc", .owner = THIS_MODULE, .pm = TITSC_PM_OPS, + .of_match_table = of_match_ptr(ti_tsc_dt_ids), }, }; module_platform_driver(ti_tsc_driver); |