diff options
Diffstat (limited to 'drivers/hwmon/lm90.c')
| -rw-r--r-- | drivers/hwmon/lm90.c | 106 |
1 files changed, 62 insertions, 44 deletions
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 618052c6cdb6..74019dff2550 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -35,13 +35,14 @@ * explicitly as max6659, or if its address is not 0x4c. * These chips lack the remote temperature offset feature. * - * This driver also supports the MAX6654 chip made by Maxim. This chip can - * be at 9 different addresses, similar to MAX6680/MAX6681. The MAX6654 is - * otherwise similar to MAX6657/MAX6658/MAX6659. Extended range is available - * by setting the configuration register accordingly, and is done during - * initialization. Extended precision is only available at conversion rates - * of 1 Hz and slower. Note that extended precision is not enabled by - * default, as this driver initializes all chips to 2 Hz by design. + * This driver also supports the MAX6654 chip made by Maxim. This chip can be + * at 9 different addresses, similar to MAX6680/MAX6681. The MAX6654 is similar + * to MAX6657/MAX6658/MAX6659, but does not support critical temperature + * limits. Extended range is available by setting the configuration register + * accordingly, and is done during initialization. Extended precision is only + * available at conversion rates of 1 Hz and slower. Note that extended + * precision is not enabled by default, as this driver initializes all chips + * to 2 Hz by design. * * This driver also supports the MAX6646, MAX6647, MAX6648, MAX6649 and * MAX6692 chips made by Maxim. These are again similar to the LM86, @@ -188,6 +189,8 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, #define LM90_HAVE_BROKEN_ALERT (1 << 7) /* Broken alert */ #define LM90_HAVE_EXTENDED_TEMP (1 << 8) /* extended temperature support*/ #define LM90_PAUSE_FOR_CONFIG (1 << 9) /* Pause conversion for config */ +#define LM90_HAVE_CRIT (1 << 10)/* Chip supports CRIT/OVERT register */ +#define LM90_HAVE_CRIT_ALRM_SWP (1 << 11)/* critical alarm bits swapped */ /* LM90 status */ #define LM90_STATUS_LTHRM (1 << 0) /* local THERM limit tripped */ @@ -197,6 +200,7 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, #define LM90_STATUS_RHIGH (1 << 4) /* remote high temp limit tripped */ #define LM90_STATUS_LLOW (1 << 5) /* local low temp limit tripped */ #define LM90_STATUS_LHIGH (1 << 6) /* local high temp limit tripped */ +#define LM90_STATUS_BUSY (1 << 7) /* conversion is ongoing */ #define MAX6696_STATUS2_R2THRM (1 << 1) /* remote2 THERM limit tripped */ #define MAX6696_STATUS2_R2OPEN (1 << 2) /* remote2 is an open circuit */ @@ -354,38 +358,43 @@ struct lm90_params { static const struct lm90_params lm90_params[] = { [adm1032] = { .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT - | LM90_HAVE_BROKEN_ALERT, + | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 10, }, [adt7461] = { .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT - | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP, + | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP + | LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 10, }, [g781] = { .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT - | LM90_HAVE_BROKEN_ALERT, + | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 8, }, [lm86] = { - .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT, + .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT + | LM90_HAVE_CRIT, .alert_alarms = 0x7b, .max_convrate = 9, }, [lm90] = { - .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT, + .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT + | LM90_HAVE_CRIT, .alert_alarms = 0x7b, .max_convrate = 9, }, [lm99] = { - .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT, + .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT + | LM90_HAVE_CRIT, .alert_alarms = 0x7b, .max_convrate = 9, }, [max6646] = { + .flags = LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 6, .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL, @@ -396,50 +405,51 @@ static const struct lm90_params lm90_params[] = { .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL, }, [max6657] = { - .flags = LM90_PAUSE_FOR_CONFIG, + .flags = LM90_PAUSE_FOR_CONFIG | LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 8, .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL, }, [max6659] = { - .flags = LM90_HAVE_EMERGENCY, + .flags = LM90_HAVE_EMERGENCY | LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 8, .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL, }, [max6680] = { - .flags = LM90_HAVE_OFFSET, + .flags = LM90_HAVE_OFFSET | LM90_HAVE_CRIT + | LM90_HAVE_CRIT_ALRM_SWP, .alert_alarms = 0x7c, .max_convrate = 7, }, [max6696] = { .flags = LM90_HAVE_EMERGENCY - | LM90_HAVE_EMERGENCY_ALARM | LM90_HAVE_TEMP3, + | LM90_HAVE_EMERGENCY_ALARM | LM90_HAVE_TEMP3 | LM90_HAVE_CRIT, .alert_alarms = 0x1c7c, .max_convrate = 6, .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL, }, [w83l771] = { - .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT, + .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 8, }, [sa56004] = { - .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT, + .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_CRIT, .alert_alarms = 0x7b, .max_convrate = 9, .reg_local_ext = SA56004_REG_R_LOCAL_TEMPL, }, [tmp451] = { .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT - | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP, + | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP | LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 9, .reg_local_ext = TMP451_REG_R_LOCAL_TEMPL, }, [tmp461] = { .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT - | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP, + | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP | LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 9, .reg_local_ext = TMP451_REG_R_LOCAL_TEMPL, @@ -668,20 +678,22 @@ static int lm90_update_limits(struct device *dev) struct i2c_client *client = data->client; int val; - val = lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT); - if (val < 0) - return val; - data->temp8[LOCAL_CRIT] = val; + if (data->flags & LM90_HAVE_CRIT) { + val = lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT); + if (val < 0) + return val; + data->temp8[LOCAL_CRIT] = val; - val = lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT); - if (val < 0) - return val; - data->temp8[REMOTE_CRIT] = val; + val = lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT); + if (val < 0) + return val; + data->temp8[REMOTE_CRIT] = val; - val = lm90_read_reg(client, LM90_REG_R_TCRIT_HYST); - if (val < 0) - return val; - data->temp_hyst = val; + val = lm90_read_reg(client, LM90_REG_R_TCRIT_HYST); + if (val < 0) + return val; + data->temp_hyst = val; + } val = lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH); if (val < 0) @@ -809,7 +821,7 @@ static int lm90_update_device(struct device *dev) val = lm90_read_reg(client, LM90_REG_R_STATUS); if (val < 0) return val; - data->alarms = val; /* lower 8 bit of alarms */ + data->alarms = val & ~LM90_STATUS_BUSY; if (data->kind == max6696) { val = lm90_select_remote_channel(data, 1); @@ -1160,8 +1172,8 @@ static int lm90_set_temphyst(struct lm90_data *data, long val) else temp = temp_from_s8(data->temp8[LOCAL_CRIT]); - /* prevent integer underflow */ - val = max(val, -128000l); + /* prevent integer overflow/underflow */ + val = clamp_val(val, -128000l, 255000l); data->temp_hyst = hyst_to_reg(temp - val); err = i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST, @@ -1192,6 +1204,7 @@ static const u8 lm90_temp_emerg_index[3] = { static const u8 lm90_min_alarm_bits[3] = { 5, 3, 11 }; static const u8 lm90_max_alarm_bits[3] = { 6, 4, 12 }; static const u8 lm90_crit_alarm_bits[3] = { 0, 1, 9 }; +static const u8 lm90_crit_alarm_bits_swapped[3] = { 1, 0, 9 }; static const u8 lm90_emergency_alarm_bits[3] = { 15, 13, 14 }; static const u8 lm90_fault_bits[3] = { 0, 2, 10 }; @@ -1217,7 +1230,10 @@ static int lm90_temp_read(struct device *dev, u32 attr, int channel, long *val) *val = (data->alarms >> lm90_max_alarm_bits[channel]) & 1; break; case hwmon_temp_crit_alarm: - *val = (data->alarms >> lm90_crit_alarm_bits[channel]) & 1; + if (data->flags & LM90_HAVE_CRIT_ALRM_SWP) + *val = (data->alarms >> lm90_crit_alarm_bits_swapped[channel]) & 1; + else + *val = (data->alarms >> lm90_crit_alarm_bits[channel]) & 1; break; case hwmon_temp_emergency_alarm: *val = (data->alarms >> lm90_emergency_alarm_bits[channel]) & 1; @@ -1465,12 +1481,11 @@ static int lm90_detect(struct i2c_client *client, if (man_id < 0 || chip_id < 0 || config1 < 0 || convrate < 0) return -ENODEV; - if (man_id == 0x01 || man_id == 0x5C || man_id == 0x41) { + if (man_id == 0x01 || man_id == 0x5C || man_id == 0xA1) { config2 = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG2); if (config2 < 0) return -ENODEV; - } else - config2 = 0; /* Make compiler happy */ + } if ((address == 0x4C || address == 0x4D) && man_id == 0x01) { /* National Semiconductor */ @@ -1903,11 +1918,14 @@ static int lm90_probe(struct i2c_client *client) info->config = data->channel_config; data->channel_config[0] = HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | - HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM | - HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM; + HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM; data->channel_config[1] = HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | - HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM | - HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT; + HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM | HWMON_T_FAULT; + + if (data->flags & LM90_HAVE_CRIT) { + data->channel_config[0] |= HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_CRIT_HYST; + data->channel_config[1] |= HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_CRIT_HYST; + } if (data->flags & LM90_HAVE_OFFSET) data->channel_config[1] |= HWMON_T_OFFSET; |