diff options
Diffstat (limited to 'drivers/hid/hid-sony.c')
| -rw-r--r-- | drivers/hid/hid-sony.c | 808 |
1 files changed, 711 insertions, 97 deletions
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c index 2f19b15f47f2..69204afea7a4 100644 --- a/drivers/hid/hid-sony.c +++ b/drivers/hid/hid-sony.c @@ -17,7 +17,8 @@ * any later version. */ -/* NOTE: in order for the Sony PS3 BD Remote Control to be found by +/* + * NOTE: in order for the Sony PS3 BD Remote Control to be found by * a Bluetooth host, the key combination Start+Enter has to be kept pressed * for about 7 seconds with the Bluetooth Host Controller in discovering mode. * @@ -28,8 +29,11 @@ #include <linux/hid.h> #include <linux/module.h> #include <linux/slab.h> -#include <linux/usb.h> #include <linux/leds.h> +#include <linux/power_supply.h> +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/input/mt.h> #include "hid-ids.h" @@ -41,8 +45,13 @@ #define DUALSHOCK4_CONTROLLER_USB BIT(5) #define DUALSHOCK4_CONTROLLER_BT BIT(6) -#define SONY_LED_SUPPORT (SIXAXIS_CONTROLLER_USB | BUZZ_CONTROLLER | DUALSHOCK4_CONTROLLER_USB) -#define SONY_FF_SUPPORT (SIXAXIS_CONTROLLER_USB | DUALSHOCK4_CONTROLLER_USB) +#define SIXAXIS_CONTROLLER (SIXAXIS_CONTROLLER_USB | SIXAXIS_CONTROLLER_BT) +#define DUALSHOCK4_CONTROLLER (DUALSHOCK4_CONTROLLER_USB |\ + DUALSHOCK4_CONTROLLER_BT) +#define SONY_LED_SUPPORT (SIXAXIS_CONTROLLER | BUZZ_CONTROLLER |\ + DUALSHOCK4_CONTROLLER) +#define SONY_BATTERY_SUPPORT (SIXAXIS_CONTROLLER | DUALSHOCK4_CONTROLLER) +#define SONY_FF_SUPPORT (SIXAXIS_CONTROLLER | DUALSHOCK4_CONTROLLER) #define MAX_LEDS 4 @@ -74,7 +83,8 @@ static const u8 sixaxis_rdesc_fixup2[] = { 0xb1, 0x02, 0xc0, 0xc0, }; -/* The default descriptor doesn't provide mapping for the accelerometers +/* + * The default descriptor doesn't provide mapping for the accelerometers * or orientation sensors. This fixed descriptor maps the accelerometers * to usage values 0x40, 0x41 and 0x42 and maps the orientation sensors * to usage values 0x43, 0x44 and 0x45. @@ -333,6 +343,217 @@ static u8 dualshock4_usb_rdesc[] = { 0xC0 /* End Collection */ }; +/* + * The default behavior of the Dualshock 4 is to send reports using report + * type 1 when running over Bluetooth. However, as soon as it receives a + * report of type 17 to set the LEDs or rumble it starts returning it's state + * in report 17 instead of 1. Since report 17 is undefined in the default HID + * descriptor the button and axis definitions must be moved to report 17 or + * the HID layer won't process the received input once a report is sent. + */ +static u8 dualshock4_bt_rdesc[] = { + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x09, 0x05, /* Usage (Gamepad), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x01, /* Report ID (1), */ + 0x75, 0x08, /* Report Size (8), */ + 0x95, 0x0A, /* Report Count (9), */ + 0x81, 0x02, /* Input (Variable), */ + 0x06, 0x04, 0xFF, /* Usage Page (FF04h), */ + 0x85, 0x02, /* Report ID (2), */ + 0x09, 0x24, /* Usage (24h), */ + 0x95, 0x24, /* Report Count (36), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x85, 0xA3, /* Report ID (163), */ + 0x09, 0x25, /* Usage (25h), */ + 0x95, 0x30, /* Report Count (48), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x85, 0x05, /* Report ID (5), */ + 0x09, 0x26, /* Usage (26h), */ + 0x95, 0x28, /* Report Count (40), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x85, 0x06, /* Report ID (6), */ + 0x09, 0x27, /* Usage (27h), */ + 0x95, 0x34, /* Report Count (52), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x85, 0x07, /* Report ID (7), */ + 0x09, 0x28, /* Usage (28h), */ + 0x95, 0x30, /* Report Count (48), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x85, 0x08, /* Report ID (8), */ + 0x09, 0x29, /* Usage (29h), */ + 0x95, 0x2F, /* Report Count (47), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x06, 0x03, 0xFF, /* Usage Page (FF03h), */ + 0x85, 0x03, /* Report ID (3), */ + 0x09, 0x21, /* Usage (21h), */ + 0x95, 0x26, /* Report Count (38), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x85, 0x04, /* Report ID (4), */ + 0x09, 0x22, /* Usage (22h), */ + 0x95, 0x2E, /* Report Count (46), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x85, 0xF0, /* Report ID (240), */ + 0x09, 0x47, /* Usage (47h), */ + 0x95, 0x3F, /* Report Count (63), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x85, 0xF1, /* Report ID (241), */ + 0x09, 0x48, /* Usage (48h), */ + 0x95, 0x3F, /* Report Count (63), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x85, 0xF2, /* Report ID (242), */ + 0x09, 0x49, /* Usage (49h), */ + 0x95, 0x0F, /* Report Count (15), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x85, 0x11, /* Report ID (17), */ + 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */ + 0x09, 0x20, /* Usage (20h), */ + 0x95, 0x02, /* Report Count (2), */ + 0x81, 0x02, /* Input (Variable), */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x09, 0x30, /* Usage (X), */ + 0x09, 0x31, /* Usage (Y), */ + 0x09, 0x32, /* Usage (Z), */ + 0x09, 0x35, /* Usage (Rz), */ + 0x15, 0x00, /* Logical Minimum (0), */ + 0x26, 0xFF, 0x00, /* Logical Maximum (255), */ + 0x75, 0x08, /* Report Size (8), */ + 0x95, 0x04, /* Report Count (4), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x39, /* Usage (Hat Switch), */ + 0x15, 0x00, /* Logical Minimum (0), */ + 0x25, 0x07, /* Logical Maximum (7), */ + 0x75, 0x04, /* Report Size (4), */ + 0x95, 0x01, /* Report Count (1), */ + 0x81, 0x42, /* Input (Variable, Null State), */ + 0x05, 0x09, /* Usage Page (Button), */ + 0x19, 0x01, /* Usage Minimum (01h), */ + 0x29, 0x0E, /* Usage Maximum (0Eh), */ + 0x15, 0x00, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x75, 0x01, /* Report Size (1), */ + 0x95, 0x0E, /* Report Count (14), */ + 0x81, 0x02, /* Input (Variable), */ + 0x75, 0x06, /* Report Size (6), */ + 0x95, 0x01, /* Report Count (1), */ + 0x81, 0x01, /* Input (Constant), */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x09, 0x33, /* Usage (Rx), */ + 0x09, 0x34, /* Usage (Ry), */ + 0x15, 0x00, /* Logical Minimum (0), */ + 0x26, 0xFF, 0x00, /* Logical Maximum (255), */ + 0x75, 0x08, /* Report Size (8), */ + 0x95, 0x02, /* Report Count (2), */ + 0x81, 0x02, /* Input (Variable), */ + 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */ + 0x09, 0x20, /* Usage (20h), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x02, /* Input (Variable), */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x19, 0x40, /* Usage Minimum (40h), */ + 0x29, 0x42, /* Usage Maximum (42h), */ + 0x16, 0x00, 0x80, /* Logical Minimum (-32768), */ + 0x26, 0x00, 0x7F, /* Logical Maximum (32767), */ + 0x75, 0x10, /* Report Size (16), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x02, /* Input (Variable), */ + 0x19, 0x43, /* Usage Minimum (43h), */ + 0x29, 0x45, /* Usage Maximum (45h), */ + 0x16, 0xFF, 0xBF, /* Logical Minimum (-16385), */ + 0x26, 0x00, 0x40, /* Logical Maximum (16384), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x02, /* Input (Variable), */ + 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */ + 0x09, 0x20, /* Usage (20h), */ + 0x15, 0x00, /* Logical Minimum (0), */ + 0x26, 0xFF, 0x00, /* Logical Maximum (255), */ + 0x75, 0x08, /* Report Size (8), */ + 0x95, 0x31, /* Report Count (51), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x21, /* Usage (21h), */ + 0x75, 0x08, /* Report Size (8), */ + 0x95, 0x4D, /* Report Count (77), */ + 0x91, 0x02, /* Output (Variable), */ + 0x85, 0x12, /* Report ID (18), */ + 0x09, 0x22, /* Usage (22h), */ + 0x95, 0x8D, /* Report Count (141), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x23, /* Usage (23h), */ + 0x91, 0x02, /* Output (Variable), */ + 0x85, 0x13, /* Report ID (19), */ + 0x09, 0x24, /* Usage (24h), */ + 0x95, 0xCD, /* Report Count (205), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x25, /* Usage (25h), */ + 0x91, 0x02, /* Output (Variable), */ + 0x85, 0x14, /* Report ID (20), */ + 0x09, 0x26, /* Usage (26h), */ + 0x96, 0x0D, 0x01, /* Report Count (269), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x27, /* Usage (27h), */ + 0x91, 0x02, /* Output (Variable), */ + 0x85, 0x15, /* Report ID (21), */ + 0x09, 0x28, /* Usage (28h), */ + 0x96, 0x4D, 0x01, /* Report Count (333), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x29, /* Usage (29h), */ + 0x91, 0x02, /* Output (Variable), */ + 0x85, 0x16, /* Report ID (22), */ + 0x09, 0x2A, /* Usage (2Ah), */ + 0x96, 0x8D, 0x01, /* Report Count (397), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x2B, /* Usage (2Bh), */ + 0x91, 0x02, /* Output (Variable), */ + 0x85, 0x17, /* Report ID (23), */ + 0x09, 0x2C, /* Usage (2Ch), */ + 0x96, 0xCD, 0x01, /* Report Count (461), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x2D, /* Usage (2Dh), */ + 0x91, 0x02, /* Output (Variable), */ + 0x85, 0x18, /* Report ID (24), */ + 0x09, 0x2E, /* Usage (2Eh), */ + 0x96, 0x0D, 0x02, /* Report Count (525), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x2F, /* Usage (2Fh), */ + 0x91, 0x02, /* Output (Variable), */ + 0x85, 0x19, /* Report ID (25), */ + 0x09, 0x30, /* Usage (30h), */ + 0x96, 0x22, 0x02, /* Report Count (546), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x31, /* Usage (31h), */ + 0x91, 0x02, /* Output (Variable), */ + 0x06, 0x80, 0xFF, /* Usage Page (FF80h), */ + 0x85, 0x82, /* Report ID (130), */ + 0x09, 0x22, /* Usage (22h), */ + 0x95, 0x3F, /* Report Count (63), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x85, 0x83, /* Report ID (131), */ + 0x09, 0x23, /* Usage (23h), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x85, 0x84, /* Report ID (132), */ + 0x09, 0x24, /* Usage (24h), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x85, 0x90, /* Report ID (144), */ + 0x09, 0x30, /* Usage (30h), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x85, 0x91, /* Report ID (145), */ + 0x09, 0x31, /* Usage (31h), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x85, 0x92, /* Report ID (146), */ + 0x09, 0x32, /* Usage (32h), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x85, 0x93, /* Report ID (147), */ + 0x09, 0x33, /* Usage (33h), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x85, 0xA0, /* Report ID (160), */ + 0x09, 0x40, /* Usage (40h), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0x85, 0xA4, /* Report ID (164), */ + 0x09, 0x44, /* Usage (44h), */ + 0xB1, 0x02, /* Feature (Variable), */ + 0xC0 /* End Collection */ +}; + static __u8 ps3remote_rdesc[] = { 0x05, 0x01, /* GUsagePage Generic Desktop */ 0x09, 0x05, /* LUsage 0x05 [Game Pad] */ @@ -450,7 +671,8 @@ static const unsigned int ps3remote_keymap_remote_buttons[] = { }; static const unsigned int buzz_keymap[] = { - /* The controller has 4 remote buzzers, each with one LED and 5 + /* + * The controller has 4 remote buzzers, each with one LED and 5 * buttons. * * We use the mapping chosen by the controller, which is: @@ -488,19 +710,35 @@ static const unsigned int buzz_keymap[] = { [20] = BTN_TRIGGER_HAPPY20, }; +static enum power_supply_property sony_battery_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_SCOPE, + POWER_SUPPLY_PROP_STATUS, +}; + +static spinlock_t sony_dev_list_lock; +static LIST_HEAD(sony_device_list); + struct sony_sc { + spinlock_t lock; + struct list_head list_node; struct hid_device *hdev; struct led_classdev *leds[MAX_LEDS]; - struct hid_report *output_report; unsigned long quirks; struct work_struct state_worker; + struct power_supply battery; #ifdef CONFIG_SONY_FF __u8 left; __u8 right; #endif + __u8 mac_address[6]; __u8 worker_initialized; + __u8 cable_state; + __u8 battery_charging; + __u8 battery_capacity; __u8 led_state[MAX_LEDS]; __u8 led_count; }; @@ -578,6 +816,10 @@ static __u8 *sony_report_fixup(struct hid_device *hdev, __u8 *rdesc, hid_info(hdev, "Using modified Dualshock 4 report descriptor with gyroscope axes\n"); rdesc = dualshock4_usb_rdesc; *rsize = sizeof(dualshock4_usb_rdesc); + } else if ((sc->quirks & DUALSHOCK4_CONTROLLER_BT) && *rsize == 357) { + hid_info(hdev, "Using modified Dualshock 4 Bluetooth report descriptor\n"); + rdesc = dualshock4_bt_rdesc; + *rsize = sizeof(dualshock4_bt_rdesc); } /* The HID descriptor exposed over BT has a trailing zero byte */ @@ -601,20 +843,127 @@ static __u8 *sony_report_fixup(struct hid_device *hdev, __u8 *rdesc, return rdesc; } +static void sixaxis_parse_report(struct sony_sc *sc, __u8 *rd, int size) +{ + static const __u8 sixaxis_battery_capacity[] = { 0, 1, 25, 50, 75, 100 }; + unsigned long flags; + __u8 cable_state, battery_capacity, battery_charging; + + /* + * The sixaxis is charging if the battery value is 0xee + * and it is fully charged if the value is 0xef. + * It does not report the actual level while charging so it + * is set to 100% while charging is in progress. + */ + if (rd[30] >= 0xee) { + battery_capacity = 100; + battery_charging = !(rd[30] & 0x01); + } else { + __u8 index = rd[30] <= 5 ? rd[30] : 5; + battery_capacity = sixaxis_battery_capacity[index]; + battery_charging = 0; + } + cable_state = !(rd[31] & 0x04); + + spin_lock_irqsave(&sc->lock, flags); + sc->cable_state = cable_state; + sc->battery_capacity = battery_capacity; + sc->battery_charging = battery_charging; + spin_unlock_irqrestore(&sc->lock, flags); +} + +static void dualshock4_parse_report(struct sony_sc *sc, __u8 *rd, int size) +{ + struct hid_input *hidinput = list_entry(sc->hdev->inputs.next, + struct hid_input, list); + struct input_dev *input_dev = hidinput->input; + unsigned long flags; + int n, offset; + __u8 cable_state, battery_capacity, battery_charging; + + /* + * Battery and touchpad data starts at byte 30 in the USB report and + * 32 in Bluetooth report. + */ + offset = (sc->quirks & DUALSHOCK4_CONTROLLER_USB) ? 30 : 32; + + /* + * The lower 4 bits of byte 30 contain the battery level + * and the 5th bit contains the USB cable state. + */ + cable_state = (rd[offset] >> 4) & 0x01; + battery_capacity = rd[offset] & 0x0F; + + /* + * When a USB power source is connected the battery level ranges from + * 0 to 10, and when running on battery power it ranges from 0 to 9. + * A battery level above 10 when plugged in means charge completed. + */ + if (!cable_state || battery_capacity > 10) + battery_charging = 0; + else + battery_charging = 1; + + if (!cable_state) + battery_capacity++; + if (battery_capacity > 10) + battery_capacity = 10; + + battery_capacity *= 10; + + spin_lock_irqsave(&sc->lock, flags); + sc->cable_state = cable_state; + sc->battery_capacity = battery_capacity; + sc->battery_charging = battery_charging; + spin_unlock_irqrestore(&sc->lock, flags); + + offset += 5; + + /* + * The Dualshock 4 multi-touch trackpad data starts at offset 35 on USB + * and 37 on Bluetooth. + * The first 7 bits of the first byte is a counter and bit 8 is a touch + * indicator that is 0 when pressed and 1 when not pressed. + * The next 3 bytes are two 12 bit touch coordinates, X and Y. + * The data for the second touch is in the same format and immediatly + * follows the data for the first. + */ + for (n = 0; n < 2; n++) { + __u16 x, y; + + x = rd[offset+1] | ((rd[offset+2] & 0xF) << 8); + y = ((rd[offset+2] & 0xF0) >> 4) | (rd[offset+3] << 4); + + input_mt_slot(input_dev, n); + input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, + !(rd[offset] >> 7)); + input_report_abs(input_dev, ABS_MT_POSITION_X, x); + input_report_abs(input_dev, ABS_MT_POSITION_Y, y); + + offset += 4; + } +} + static int sony_raw_event(struct hid_device *hdev, struct hid_report *report, __u8 *rd, int size) { struct sony_sc *sc = hid_get_drvdata(hdev); - /* Sixaxis HID report has acclerometers/gyro with MSByte first, this + /* + * Sixaxis HID report has acclerometers/gyro with MSByte first, this * has to be BYTE_SWAPPED before passing up to joystick interface */ - if ((sc->quirks & (SIXAXIS_CONTROLLER_USB | SIXAXIS_CONTROLLER_BT)) && - rd[0] == 0x01 && size == 49) { + if ((sc->quirks & SIXAXIS_CONTROLLER) && rd[0] == 0x01 && size == 49) { swap(rd[41], rd[42]); swap(rd[43], rd[44]); swap(rd[45], rd[46]); swap(rd[47], rd[48]); + + sixaxis_parse_report(sc, rd, size); + } else if (((sc->quirks & DUALSHOCK4_CONTROLLER_USB) && rd[0] == 0x01 && + size == 64) || ((sc->quirks & DUALSHOCK4_CONTROLLER_BT) + && rd[0] == 0x11 && size == 78)) { + dualshock4_parse_report(sc, rd, size); } return 0; @@ -657,45 +1006,6 @@ static int sony_mapping(struct hid_device *hdev, struct hid_input *hi, } /* - * The Sony Sixaxis does not handle HID Output Reports on the Interrupt EP - * like it should according to usbhid/hid-core.c::usbhid_output_raw_report() - * so we need to override that forcing HID Output Reports on the Control EP. - * - * There is also another issue about HID Output Reports via USB, the Sixaxis - * does not want the report_id as part of the data packet, so we have to - * discard buf[0] when sending the actual control message, even for numbered - * reports, humpf! - */ -static int sixaxis_usb_output_raw_report(struct hid_device *hid, __u8 *buf, - size_t count, unsigned char report_type) -{ - struct usb_interface *intf = to_usb_interface(hid->dev.parent); - struct usb_device *dev = interface_to_usbdev(intf); - struct usb_host_interface *interface = intf->cur_altsetting; - int report_id = buf[0]; - int ret; - - if (report_type == HID_OUTPUT_REPORT) { - /* Don't send the Report ID */ - buf++; - count--; - } - - ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - HID_REQ_SET_REPORT, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - ((report_type + 1) << 8) | report_id, - interface->desc.bInterfaceNumber, buf, count, - USB_CTRL_SET_TIMEOUT); - - /* Count also the Report ID, in case of an Output report. */ - if (ret > 0 && report_type == HID_OUTPUT_REPORT) - ret++; - - return ret; -} - -/* * Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller * to "operational". Without this, the ps3 controller will not report any * events. @@ -708,7 +1018,8 @@ static int sixaxis_set_operational_usb(struct hid_device *hdev) if (!buf) return -ENOMEM; - ret = hdev->hid_get_raw_report(hdev, 0xf2, buf, 17, HID_FEATURE_REPORT); + ret = hid_hw_raw_request(hdev, 0xf2, buf, 17, HID_FEATURE_REPORT, + HID_REQ_GET_REPORT); if (ret < 0) hid_err(hdev, "can't set operational mode\n"); @@ -721,7 +1032,20 @@ static int sixaxis_set_operational_usb(struct hid_device *hdev) static int sixaxis_set_operational_bt(struct hid_device *hdev) { unsigned char buf[] = { 0xf4, 0x42, 0x03, 0x00, 0x00 }; - return hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT); + return hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf), + HID_FEATURE_REPORT, HID_REQ_SET_REPORT); +} + +/* + * Requesting feature report 0x02 in Bluetooth mode changes the state of the + * controller so that it sends full input reports of type 0x11. + */ +static int dualshock4_set_operational_bt(struct hid_device *hdev) +{ + __u8 buf[37] = { 0 }; + + return hid_hw_raw_request(hdev, 0x02, buf, sizeof(buf), + HID_FEATURE_REPORT, HID_REQ_GET_REPORT); } static void buzz_set_leds(struct hid_device *hdev, const __u8 *leds) @@ -751,8 +1075,7 @@ static void sony_set_leds(struct hid_device *hdev, const __u8 *leds, int count) if (drv_data->quirks & BUZZ_CONTROLLER && count == 4) { buzz_set_leds(hdev, leds); - } else if ((drv_data->quirks & SIXAXIS_CONTROLLER_USB) || - (drv_data->quirks & DUALSHOCK4_CONTROLLER_USB)) { + } else { for (n = 0; n < count; n++) drv_data->led_state[n] = leds[n]; schedule_work(&drv_data->state_worker); @@ -792,7 +1115,6 @@ static enum led_brightness sony_led_get_brightness(struct led_classdev *led) struct sony_sc *drv_data; int n; - int on = 0; drv_data = hid_get_drvdata(hdev); if (!drv_data) { @@ -801,13 +1123,11 @@ static enum led_brightness sony_led_get_brightness(struct led_classdev *led) } for (n = 0; n < drv_data->led_count; n++) { - if (led == drv_data->leds[n]) { - on = !!(drv_data->led_state[n]); - break; - } + if (led == drv_data->leds[n]) + return drv_data->led_state[n]; } - return on ? LED_FULL : LED_OFF; + return LED_OFF; } static void sony_leds_remove(struct hid_device *hdev) @@ -857,7 +1177,7 @@ static int sony_leds_init(struct hid_device *hdev) /* Validate expected report characteristics. */ if (!hid_validate_values(hdev, HID_OUTPUT_REPORT, 0, 0, 7)) return -ENODEV; - } else if (drv_data->quirks & DUALSHOCK4_CONTROLLER_USB) { + } else if (drv_data->quirks & DUALSHOCK4_CONTROLLER) { drv_data->led_count = 3; max_brightness = 255; use_colors = 1; @@ -871,9 +1191,11 @@ static int sony_leds_init(struct hid_device *hdev) name_fmt = "%s::sony%d"; } - /* Clear LEDs as we have no way of reading their initial state. This is + /* + * Clear LEDs as we have no way of reading their initial state. This is * only relevant if the driver is loaded after somebody actively set the - * LEDs to on */ + * LEDs to on + */ sony_set_leds(hdev, initial_values, drv_data->led_count); name_sz = strlen(dev_name(&hdev->dev)) + name_len + 1; @@ -943,29 +1265,45 @@ static void sixaxis_state_worker(struct work_struct *work) buf[10] |= sc->led_state[2] << 3; buf[10] |= sc->led_state[3] << 4; - sc->hdev->hid_output_raw_report(sc->hdev, buf, sizeof(buf), - HID_OUTPUT_REPORT); + hid_hw_raw_request(sc->hdev, 0x01, buf, sizeof(buf), HID_OUTPUT_REPORT, + HID_REQ_SET_REPORT); } static void dualshock4_state_worker(struct work_struct *work) { struct sony_sc *sc = container_of(work, struct sony_sc, state_worker); struct hid_device *hdev = sc->hdev; - struct hid_report *report = sc->output_report; - __s32 *value = report->field[0]->value; + int offset; - value[0] = 0x03; + __u8 buf[78] = { 0 }; + + if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) { + buf[0] = 0x05; + buf[1] = 0x03; + offset = 4; + } else { + buf[0] = 0x11; + buf[1] = 0xB0; + buf[3] = 0x0F; + offset = 6; + } #ifdef CONFIG_SONY_FF - value[3] = sc->right; - value[4] = sc->left; + buf[offset++] = sc->right; + buf[offset++] = sc->left; +#else + offset += 2; #endif - value[5] = sc->led_state[0]; - value[6] = sc->led_state[1]; - value[7] = sc->led_state[2]; + buf[offset++] = sc->led_state[0]; + buf[offset++] = sc->led_state[1]; + buf[offset++] = sc->led_state[2]; - hid_hw_request(hdev, report, HID_REQ_SET_REPORT); + if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) + hid_hw_output_report(hdev, buf, 32); + else + hid_hw_raw_request(hdev, 0x11, buf, 78, + HID_OUTPUT_REPORT, HID_REQ_SET_REPORT); } #ifdef CONFIG_SONY_FF @@ -1000,35 +1338,247 @@ static int sony_init_ff(struct hid_device *hdev) { return 0; } + #endif -static int sony_set_output_report(struct sony_sc *sc, int req_id, int req_size) +static int sony_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) { - struct list_head *head, *list; - struct hid_report *report; + struct sony_sc *sc = container_of(psy, struct sony_sc, battery); + unsigned long flags; + int ret = 0; + u8 battery_charging, battery_capacity, cable_state; + + spin_lock_irqsave(&sc->lock, flags); + battery_charging = sc->battery_charging; + battery_capacity = sc->battery_capacity; + cable_state = sc->cable_state; + spin_unlock_irqrestore(&sc->lock, flags); + + switch (psp) { + case POWER_SUPPLY_PROP_PRESENT: + val->intval = 1; + break; + case POWER_SUPPLY_PROP_SCOPE: + val->intval = POWER_SUPPLY_SCOPE_DEVICE; + break; + case POWER_SUPPLY_PROP_CAPACITY: + val->intval = battery_capacity; + break; + case POWER_SUPPLY_PROP_STATUS: + if (battery_charging) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else + if (battery_capacity == 100 && cable_state) + val->intval = POWER_SUPPLY_STATUS_FULL; + else + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static int sony_battery_probe(struct sony_sc *sc) +{ + static atomic_t power_id_seq = ATOMIC_INIT(0); + unsigned long power_id; struct hid_device *hdev = sc->hdev; + int ret; + + /* + * Set the default battery level to 100% to avoid low battery warnings + * if the battery is polled before the first device report is received. + */ + sc->battery_capacity = 100; + + power_id = (unsigned long)atomic_inc_return(&power_id_seq); + + sc->battery.properties = sony_battery_props; + sc->battery.num_properties = ARRAY_SIZE(sony_battery_props); + sc->battery.get_property = sony_battery_get_property; + sc->battery.type = POWER_SUPPLY_TYPE_BATTERY; + sc->battery.use_for_apm = 0; + sc->battery.name = kasprintf(GFP_KERNEL, "sony_controller_battery_%lu", + power_id); + if (!sc->battery.name) + return -ENOMEM; - list = &hdev->report_enum[HID_OUTPUT_REPORT].report_list; + ret = power_supply_register(&hdev->dev, &sc->battery); + if (ret) { + hid_err(hdev, "Unable to register battery device\n"); + goto err_free; + } - list_for_each(head, list) { - report = list_entry(head, struct hid_report, list); + power_supply_powers(&sc->battery, &hdev->dev); + return 0; - if (report->id == req_id) { - if (report->size < req_size) { - hid_err(hdev, "Output report 0x%02x (%i bits) is smaller than requested size (%i bits)\n", - req_id, report->size, req_size); - return -EINVAL; - } - sc->output_report = report; - return 0; +err_free: + kfree(sc->battery.name); + sc->battery.name = NULL; + return ret; +} + +static void sony_battery_remove(struct sony_sc *sc) +{ + if (!sc->battery.name) + return; + + power_supply_unregister(&sc->battery); + kfree(sc->battery.name); + sc->battery.name = NULL; +} + +static int sony_register_touchpad(struct sony_sc *sc, int touch_count, + int w, int h) +{ + struct hid_input *hidinput = list_entry(sc->hdev->inputs.next, + struct hid_input, list); + struct input_dev *input_dev = hidinput->input; + int ret; + + ret = input_mt_init_slots(input_dev, touch_count, 0); + if (ret < 0) { + hid_err(sc->hdev, "Unable to initialize multi-touch slots\n"); + return ret; + } + + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, w, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, h, 0, 0); + + return 0; +} + +/* + * If a controller is plugged in via USB while already connected via Bluetooth + * it will show up as two devices. A global list of connected controllers and + * their MAC addresses is maintained to ensure that a device is only connected + * once. + */ +static int sony_check_add_dev_list(struct sony_sc *sc) +{ + struct sony_sc *entry; + unsigned long flags; + int ret; + + spin_lock_irqsave(&sony_dev_list_lock, flags); + + list_for_each_entry(entry, &sony_device_list, list_node) { + ret = memcmp(sc->mac_address, entry->mac_address, + sizeof(sc->mac_address)); + if (!ret) { + ret = -EEXIST; + hid_info(sc->hdev, "controller with MAC address %pMR already connected\n", + sc->mac_address); + goto unlock; } } - hid_err(hdev, "Unable to locate output report 0x%02x\n", req_id); + ret = 0; + list_add(&(sc->list_node), &sony_device_list); - return -EINVAL; +unlock: + spin_unlock_irqrestore(&sony_dev_list_lock, flags); + return ret; +} + +static void sony_remove_dev_list(struct sony_sc *sc) +{ + unsigned long flags; + + if (sc->list_node.next) { + spin_lock_irqsave(&sony_dev_list_lock, flags); + list_del(&(sc->list_node)); + spin_unlock_irqrestore(&sony_dev_list_lock, flags); + } } +static int sony_get_bt_devaddr(struct sony_sc *sc) +{ + int ret; + + /* HIDP stores the device MAC address as a string in the uniq field. */ + ret = strlen(sc->hdev->uniq); + if (ret != 17) + return -EINVAL; + + ret = sscanf(sc->hdev->uniq, + "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", + &sc->mac_address[5], &sc->mac_address[4], &sc->mac_address[3], + &sc->mac_address[2], &sc->mac_address[1], &sc->mac_address[0]); + + if (ret != 6) + return -EINVAL; + + return 0; +} + +static int sony_check_add(struct sony_sc *sc) +{ + int n, ret; + + if ((sc->quirks & DUALSHOCK4_CONTROLLER_BT) || + (sc->quirks & SIXAXIS_CONTROLLER_BT)) { + /* + * sony_get_bt_devaddr() attempts to parse the Bluetooth MAC + * address from the uniq string where HIDP stores it. + * As uniq cannot be guaranteed to be a MAC address in all cases + * a failure of this function should not prevent the connection. + */ + if (sony_get_bt_devaddr(sc) < 0) { + hid_warn(sc->hdev, "UNIQ does not contain a MAC address; duplicate check skipped\n"); + return 0; + } + } else if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) { + __u8 buf[7]; + + /* + * The MAC address of a DS4 controller connected via USB can be + * retrieved with feature report 0x81. The address begins at + * offset 1. + */ + ret = hid_hw_raw_request(sc->hdev, 0x81, buf, sizeof(buf), + HID_FEATURE_REPORT, HID_REQ_GET_REPORT); + + if (ret != 7) { + hid_err(sc->hdev, "failed to retrieve feature report 0x81 with the DualShock 4 MAC address\n"); + return ret < 0 ? ret : -EINVAL; + } + + memcpy(sc->mac_address, &buf[1], sizeof(sc->mac_address)); + } else if (sc->quirks & SIXAXIS_CONTROLLER_USB) { + __u8 buf[18]; + + /* + * The MAC address of a Sixaxis controller connected via USB can + * be retrieved with feature report 0xf2. The address begins at + * offset 4. + */ + ret = hid_hw_raw_request(sc->hdev, 0xf2, buf, sizeof(buf), + HID_FEATURE_REPORT, HID_REQ_GET_REPORT); + + if (ret != 18) { + hid_err(sc->hdev, "failed to retrieve feature report 0xf2 with the Sixaxis MAC address\n"); + return ret < 0 ? ret : -EINVAL; + } + + /* + * The Sixaxis device MAC in the report is big-endian and must + * be byte-swapped. + */ + for (n = 0; n < 6; n++) + sc->mac_address[5-n] = buf[4+n]; + } else { + return 0; + } + + return sony_check_add_dev_list(sc); +} + + static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) { int ret; @@ -1066,17 +1616,48 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) } if (sc->quirks & SIXAXIS_CONTROLLER_USB) { - hdev->hid_output_raw_report = sixaxis_usb_output_raw_report; + /* + * The Sony Sixaxis does not handle HID Output Reports on the + * Interrupt EP like it could, so we need to force HID Output + * Reports to use HID_REQ_SET_REPORT on the Control EP. + * + * There is also another issue about HID Output Reports via USB, + * the Sixaxis does not want the report_id as part of the data + * packet, so we have to discard buf[0] when sending the actual + * control message, even for numbered reports, humpf! + */ + hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP; + hdev->quirks |= HID_QUIRK_SKIP_OUTPUT_REPORT_ID; ret = sixaxis_set_operational_usb(hdev); - sc->worker_initialized = 1; INIT_WORK(&sc->state_worker, sixaxis_state_worker); - } - else if (sc->quirks & SIXAXIS_CONTROLLER_BT) + } else if (sc->quirks & SIXAXIS_CONTROLLER_BT) { + /* + * The Sixaxis wants output reports sent on the ctrl endpoint + * when connected via Bluetooth. + */ + hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP; ret = sixaxis_set_operational_bt(hdev); - else if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) { - /* Report 5 (31 bytes) is used to send data to the controller via USB */ - ret = sony_set_output_report(sc, 0x05, 248); + sc->worker_initialized = 1; + INIT_WORK(&sc->state_worker, sixaxis_state_worker); + } else if (sc->quirks & DUALSHOCK4_CONTROLLER) { + if (sc->quirks & DUALSHOCK4_CONTROLLER_BT) { + /* + * The DualShock 4 wants output reports sent on the ctrl + * endpoint when connected via Bluetooth. + */ + hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP; + ret = dualshock4_set_operational_bt(hdev); + if (ret < 0) { + hid_err(hdev, "failed to set the Dualshock 4 operational mode\n"); + goto err_stop; + } + } + /* + * The Dualshock 4 touchpad supports 2 touches and has a + * resolution of 1920x940. + */ + ret = sony_register_touchpad(sc, 2, 1920, 940); if (ret < 0) goto err_stop; @@ -1089,22 +1670,46 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) if (ret < 0) goto err_stop; + ret = sony_check_add(sc); + if (ret < 0) + goto err_stop; + if (sc->quirks & SONY_LED_SUPPORT) { ret = sony_leds_init(hdev); if (ret < 0) goto err_stop; } + if (sc->quirks & SONY_BATTERY_SUPPORT) { + ret = sony_battery_probe(sc); + if (ret < 0) + goto err_stop; + + /* Open the device to receive reports with battery info */ + ret = hid_hw_open(hdev); + if (ret < 0) { + hid_err(hdev, "hw open failed\n"); + goto err_stop; + } + } + if (sc->quirks & SONY_FF_SUPPORT) { ret = sony_init_ff(hdev); if (ret < 0) - goto err_stop; + goto err_close; } return 0; +err_close: + hid_hw_close(hdev); err_stop: if (sc->quirks & SONY_LED_SUPPORT) sony_leds_remove(hdev); + if (sc->quirks & SONY_BATTERY_SUPPORT) + sony_battery_remove(sc); + if (sc->worker_initialized) + cancel_work_sync(&sc->state_worker); + sony_remove_dev_list(sc); hid_hw_stop(hdev); return ret; } @@ -1118,6 +1723,15 @@ static void sony_remove(struct hid_device *hdev) if (sc->worker_initialized) cancel_work_sync(&sc->state_worker); + if (sc->quirks & SONY_BATTERY_SUPPORT) { + hid_hw_close(hdev); + sony_battery_remove(sc); + } + + if (sc->worker_initialized) + cancel_work_sync(&sc->state_worker); + + sony_remove_dev_list(sc); hid_hw_stop(hdev); } |