diff options
Diffstat (limited to 'drivers/clk/clk.c')
| -rw-r--r-- | drivers/clk/clk.c | 218 |
1 files changed, 210 insertions, 8 deletions
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index e2ed078abd90..d31055ae6ec6 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -67,6 +67,7 @@ struct clk_core { unsigned long max_rate; unsigned long accuracy; int phase; + struct clk_duty duty; struct hlist_head children; struct hlist_node child_node; struct hlist_head clks; @@ -690,6 +691,9 @@ static void clk_core_unprepare(struct clk_core *core) "Unpreparing critical %s\n", core->name)) return; + if (core->flags & CLK_SET_RATE_GATE) + clk_core_rate_unprotect(core); + if (--core->prepare_count > 0) return; @@ -764,6 +768,16 @@ static int clk_core_prepare(struct clk_core *core) core->prepare_count++; + /* + * CLK_SET_RATE_GATE is a special case of clock protection + * Instead of a consumer claiming exclusive rate control, it is + * actually the provider which prevents any consumer from making any + * operation which could result in a rate change or rate glitch while + * the clock is prepared. + */ + if (core->flags & CLK_SET_RATE_GATE) + clk_core_rate_protect(core); + return 0; unprepare: clk_core_unprepare(core->parent); @@ -1887,9 +1901,6 @@ static int clk_core_set_rate_nolock(struct clk_core *core, if (clk_core_rate_is_protected(core)) return -EBUSY; - if ((core->flags & CLK_SET_RATE_GATE) && core->prepare_count) - return -EBUSY; - /* calculate new rates and get the topmost changed clock */ top = clk_calc_new_rates(core, req_rate); if (!top) @@ -2401,6 +2412,172 @@ int clk_get_phase(struct clk *clk) } EXPORT_SYMBOL_GPL(clk_get_phase); +static void clk_core_reset_duty_cycle_nolock(struct clk_core *core) +{ + /* Assume a default value of 50% */ + core->duty.num = 1; + core->duty.den = 2; +} + +static int clk_core_update_duty_cycle_parent_nolock(struct clk_core *core); + +static int clk_core_update_duty_cycle_nolock(struct clk_core *core) +{ + struct clk_duty *duty = &core->duty; + int ret = 0; + + if (!core->ops->get_duty_cycle) + return clk_core_update_duty_cycle_parent_nolock(core); + + ret = core->ops->get_duty_cycle(core->hw, duty); + if (ret) + goto reset; + + /* Don't trust the clock provider too much */ + if (duty->den == 0 || duty->num > duty->den) { + ret = -EINVAL; + goto reset; + } + + return 0; + +reset: + clk_core_reset_duty_cycle_nolock(core); + return ret; +} + +static int clk_core_update_duty_cycle_parent_nolock(struct clk_core *core) +{ + int ret = 0; + + if (core->parent && + core->flags & CLK_DUTY_CYCLE_PARENT) { + ret = clk_core_update_duty_cycle_nolock(core->parent); + memcpy(&core->duty, &core->parent->duty, sizeof(core->duty)); + } else { + clk_core_reset_duty_cycle_nolock(core); + } + + return ret; +} + +static int clk_core_set_duty_cycle_parent_nolock(struct clk_core *core, + struct clk_duty *duty); + +static int clk_core_set_duty_cycle_nolock(struct clk_core *core, + struct clk_duty *duty) +{ + int ret; + + lockdep_assert_held(&prepare_lock); + + if (clk_core_rate_is_protected(core)) + return -EBUSY; + + trace_clk_set_duty_cycle(core, duty); + + if (!core->ops->set_duty_cycle) + return clk_core_set_duty_cycle_parent_nolock(core, duty); + + ret = core->ops->set_duty_cycle(core->hw, duty); + if (!ret) + memcpy(&core->duty, duty, sizeof(*duty)); + + trace_clk_set_duty_cycle_complete(core, duty); + + return ret; +} + +static int clk_core_set_duty_cycle_parent_nolock(struct clk_core *core, + struct clk_duty *duty) +{ + int ret = 0; + + if (core->parent && + core->flags & (CLK_DUTY_CYCLE_PARENT | CLK_SET_RATE_PARENT)) { + ret = clk_core_set_duty_cycle_nolock(core->parent, duty); + memcpy(&core->duty, &core->parent->duty, sizeof(core->duty)); + } + + return ret; +} + +/** + * clk_set_duty_cycle - adjust the duty cycle ratio of a clock signal + * @clk: clock signal source + * @num: numerator of the duty cycle ratio to be applied + * @den: denominator of the duty cycle ratio to be applied + * + * Apply the duty cycle ratio if the ratio is valid and the clock can + * perform this operation + * + * Returns (0) on success, a negative errno otherwise. + */ +int clk_set_duty_cycle(struct clk *clk, unsigned int num, unsigned int den) +{ + int ret; + struct clk_duty duty; + + if (!clk) + return 0; + + /* sanity check the ratio */ + if (den == 0 || num > den) + return -EINVAL; + + duty.num = num; + duty.den = den; + + clk_prepare_lock(); + + if (clk->exclusive_count) + clk_core_rate_unprotect(clk->core); + + ret = clk_core_set_duty_cycle_nolock(clk->core, &duty); + + if (clk->exclusive_count) + clk_core_rate_protect(clk->core); + + clk_prepare_unlock(); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_set_duty_cycle); + +static int clk_core_get_scaled_duty_cycle(struct clk_core *core, + unsigned int scale) +{ + struct clk_duty *duty = &core->duty; + int ret; + + clk_prepare_lock(); + + ret = clk_core_update_duty_cycle_nolock(core); + if (!ret) + ret = mult_frac(scale, duty->num, duty->den); + + clk_prepare_unlock(); + + return ret; +} + +/** + * clk_get_scaled_duty_cycle - return the duty cycle ratio of a clock signal + * @clk: clock signal source + * @scale: scaling factor to be applied to represent the ratio as an integer + * + * Returns the duty cycle ratio of a clock node multiplied by the provided + * scaling factor, or negative errno on error. + */ +int clk_get_scaled_duty_cycle(struct clk *clk, unsigned int scale) +{ + if (!clk) + return 0; + + return clk_core_get_scaled_duty_cycle(clk->core, scale); +} +EXPORT_SYMBOL_GPL(clk_get_scaled_duty_cycle); + /** * clk_is_match - check if two clk's point to the same hardware clock * @p: clk compared against q @@ -2454,12 +2631,13 @@ static void clk_summary_show_one(struct seq_file *s, struct clk_core *c, if (!c) return; - seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu %-3d\n", + seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu %5d %6d\n", level * 3 + 1, "", 30 - level * 3, c->name, c->enable_count, c->prepare_count, c->protect_count, clk_core_get_rate(c), clk_core_get_accuracy(c), - clk_core_get_phase(c)); + clk_core_get_phase(c), + clk_core_get_scaled_duty_cycle(c, 100000)); } static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c, @@ -2481,9 +2659,9 @@ static int clk_summary_show(struct seq_file *s, void *data) struct clk_core *c; struct hlist_head **lists = (struct hlist_head **)s->private; - seq_puts(s, " enable prepare protect \n"); - seq_puts(s, " clock count count count rate accuracy phase\n"); - seq_puts(s, "----------------------------------------------------------------------------------------\n"); + seq_puts(s, " enable prepare protect duty\n"); + seq_puts(s, " clock count count count rate accuracy phase cycle\n"); + seq_puts(s, "---------------------------------------------------------------------------------------------\n"); clk_prepare_lock(); @@ -2510,6 +2688,8 @@ static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level) seq_printf(s, "\"rate\": %lu,", clk_core_get_rate(c)); seq_printf(s, "\"accuracy\": %lu,", clk_core_get_accuracy(c)); seq_printf(s, "\"phase\": %d", clk_core_get_phase(c)); + seq_printf(s, "\"duty_cycle\": %u", + clk_core_get_scaled_duty_cycle(c, 100000)); } static void clk_dump_subtree(struct seq_file *s, struct clk_core *c, int level) @@ -2571,6 +2751,7 @@ static const struct { ENTRY(CLK_SET_RATE_UNGATE), ENTRY(CLK_IS_CRITICAL), ENTRY(CLK_OPS_PARENT_ENABLE), + ENTRY(CLK_DUTY_CYCLE_PARENT), #undef ENTRY }; @@ -2609,6 +2790,17 @@ static int possible_parents_show(struct seq_file *s, void *data) } DEFINE_SHOW_ATTRIBUTE(possible_parents); +static int clk_duty_cycle_show(struct seq_file *s, void *data) +{ + struct clk_core *core = s->private; + struct clk_duty *duty = &core->duty; + + seq_printf(s, "%u/%u\n", duty->num, duty->den); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(clk_duty_cycle); + static void clk_debug_create_one(struct clk_core *core, struct dentry *pdentry) { struct dentry *root; @@ -2627,6 +2819,8 @@ static void clk_debug_create_one(struct clk_core *core, struct dentry *pdentry) debugfs_create_u32("clk_enable_count", 0444, root, &core->enable_count); debugfs_create_u32("clk_protect_count", 0444, root, &core->protect_count); debugfs_create_u32("clk_notifier_count", 0444, root, &core->notifier_count); + debugfs_create_file("clk_duty_cycle", 0444, root, core, + &clk_duty_cycle_fops); if (core->num_parents > 1) debugfs_create_file("clk_possible_parents", 0444, root, core, @@ -2845,6 +3039,11 @@ static int __clk_core_init(struct clk_core *core) core->phase = 0; /* + * Set clk's duty cycle. + */ + clk_core_update_duty_cycle_nolock(core); + + /* * Set clk's rate. The preferred method is to use .recalc_rate. For * simple clocks and lazy developers the default fallback is to use the * parent's rate. If a clock doesn't have a parent (or is orphaned) @@ -2933,6 +3132,7 @@ struct clk *__clk_create_clk(struct clk_hw *hw, const char *dev_id, return clk; } +/* keep in sync with __clk_put */ void __clk_free_clk(struct clk *clk) { clk_prepare_lock(); @@ -3312,6 +3512,7 @@ int __clk_get(struct clk *clk) return 1; } +/* keep in sync with __clk_free_clk */ void __clk_put(struct clk *clk) { struct module *owner; @@ -3345,6 +3546,7 @@ void __clk_put(struct clk *clk) module_put(owner); + kfree_const(clk->con_id); kfree(clk); } |