diff options
Diffstat (limited to 'arch')
328 files changed, 4418 insertions, 3051 deletions
diff --git a/arch/arc/include/asm/barrier.h b/arch/arc/include/asm/barrier.h deleted file mode 100644 index c32245c3d1e9..000000000000 --- a/arch/arc/include/asm/barrier.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_BARRIER_H -#define __ASM_BARRIER_H - -#ifndef __ASSEMBLY__ - -/* TODO-vineetg: Need to see what this does, don't we need sync anywhere */ -#define mb() __asm__ __volatile__ ("" : : : "memory") -#define rmb() mb() -#define wmb() mb() -#define set_mb(var, value) do { var = value; mb(); } while (0) -#define set_wmb(var, value) do { var = value; wmb(); } while (0) -#define read_barrier_depends() mb() - -/* TODO-vineetg verify the correctness of macros here */ -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#endif - -#define smp_read_barrier_depends() do { } while (0) - -#endif - -#endif diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S index 819dd5f7eb05..29b82adbf0b4 100644 --- a/arch/arc/kernel/entry.S +++ b/arch/arc/kernel/entry.S @@ -614,11 +614,13 @@ resume_user_mode_begin: resume_kernel_mode: -#ifdef CONFIG_PREEMPT - - ; This is a must for preempt_schedule_irq() + ; Disable Interrupts from this point on + ; CONFIG_PREEMPT: This is a must for preempt_schedule_irq() + ; !CONFIG_PREEMPT: To ensure restore_regs is intr safe IRQ_DISABLE r9 +#ifdef CONFIG_PREEMPT + ; Can't preempt if preemption disabled GET_CURR_THR_INFO_FROM_SP r10 ld r8, [r10, THREAD_INFO_PREEMPT_COUNT] diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ab438cb5af55..1c1fbbf6e4ae 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -30,9 +30,9 @@ config ARM select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT) select HAVE_ARCH_TRACEHOOK select HAVE_BPF_JIT + select HAVE_CC_STACKPROTECTOR select HAVE_CONTEXT_TRACKING select HAVE_C_RECORDMCOUNT - select HAVE_CC_STACKPROTECTOR select HAVE_DEBUG_KMEMLEAK select HAVE_DMA_API_DEBUG select HAVE_DMA_ATTRS @@ -311,6 +311,7 @@ config ARCH_MULTIPLATFORM select ARM_HAS_SG_CHAIN select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR + select CLKSRC_OF select COMMON_CLK select GENERIC_CLOCKEVENTS select MULTI_IRQ_HANDLER @@ -375,7 +376,6 @@ config ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select IRQ_DOMAIN - select NEED_MACH_GPIO_H select NEED_MACH_IO_H if PCCARD select PINCTRL select PINCTRL_AT91 if USE_OF @@ -422,8 +422,8 @@ config ARCH_EFM32 bool "Energy Micro efm32" depends on !MMU select ARCH_REQUIRE_GPIOLIB - select AUTO_ZRELADDR select ARM_NVIC + select AUTO_ZRELADDR select CLKSRC_OF select COMMON_CLK select CPU_V7M @@ -511,8 +511,8 @@ config ARCH_IXP4XX bool "IXP4xx-based" depends on MMU select ARCH_HAS_DMA_SET_COHERENT_MASK - select ARCH_SUPPORTS_BIG_ENDIAN select ARCH_REQUIRE_GPIOLIB + select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO select CPU_XSCALE select DMABOUNCE if PCI @@ -1110,9 +1110,9 @@ config ARM_NR_BANKS default 8 config IWMMXT - bool "Enable iWMMXt support" if !CPU_PJ4 - depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 - default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 + bool "Enable iWMMXt support" + depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B + default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B help Enable support for iWMMXt context switching at run time if running on a CPU that supports it. @@ -1575,8 +1575,8 @@ config BIG_LITTLE config BL_SWITCHER bool "big.LITTLE switcher support" depends on BIG_LITTLE && MCPM && HOTPLUG_CPU - select CPU_PM select ARM_CPU_SUSPEND + select CPU_PM help The big.LITTLE "switcher" provides the core functionality to transparently handle transition between a cluster of A15's @@ -1920,9 +1920,9 @@ config XEN depends on CPU_V7 && !CPU_V6 depends on !GENERIC_ATOMIC64 depends on MMU + select ARCH_DMA_ADDR_T_64BIT select ARM_PSCI select SWIOTLB_XEN - select ARCH_DMA_ADDR_T_64BIT help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 4a2fc0bf6fc9..eab8ecbe69c1 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1030,9 +1030,9 @@ config DEBUG_UART_PHYS default 0x40100000 if DEBUG_PXA_UART1 default 0x42000000 if ARCH_GEMINI default 0x7c0003f8 if FOOTBRIDGE - default 0x80230000 if DEBUG_PICOXCELL_UART default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART + default 0x80230000 if DEBUG_PICOXCELL_UART default 0x808c0000 if ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX @@ -1096,22 +1096,22 @@ config DEBUG_UART_VIRT default 0xfeb26000 if DEBUG_RK3X_UART1 default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 default 0xfeb31000 if DEBUG_KEYSTONE_UART1 - default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE - default 0xfed60000 if DEBUG_RK29_UART0 - default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 - default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0xfec02000 if DEBUG_SOCFPGA_UART + default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 default 0xfed12000 if ARCH_KIRKWOOD + default 0xfed60000 if DEBUG_RK29_UART0 + default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 + default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0xfedc0000 if ARCH_EP93XX default 0xfee003f8 if FOOTBRIDGE default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART - default 0xfef36000 if DEBUG_HIGHBANK_UART default 0xfee82340 if ARCH_IOP13XX default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN + default 0xfef36000 if DEBUG_HIGHBANK_UART default 0xfefff700 if ARCH_IOP33X default 0xff003000 if DEBUG_U300_UART default DEBUG_UART_PHYS if !MMU diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 35c146f31e46..a62dddc60614 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -51,10 +51,9 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb +dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ bcm21664-garnet.dtb -dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb -dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2-sony-nsz-gs7.dtb \ berlin2cd-google-chromecast.dtb @@ -246,6 +245,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-sbc-t3730.dtb \ omap3-devkit8000.dtb \ omap3-beagle-xm.dtb \ + omap3-beagle-xm-ab.dtb \ omap3-evm.dtb \ omap3-evm-37xx.dtb \ omap3-ldp.dtb \ @@ -289,23 +289,18 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am43x-epos-evm.dtb \ am437x-gp-evm.dtb \ dra7-evm.dtb -dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb +dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \ + orion5x-lacie-ethernet-disk-mini-v2.dtb \ + orion5x-maxtor-shared-storage-2.dtb \ + orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ qcom-apq8074-dragonboard.dtb -dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ - ste-hrefprev60-stuib.dtb \ - ste-hrefprev60-tvk.dtb \ - ste-hrefv60plus-stuib.dtb \ - ste-hrefv60plus-tvk.dtb \ - ste-ccu8540.dtb \ - ste-ccu9540.dtb dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb -dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \ - r7s72100-genmai.dtb \ +dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \ r7s72100-genmai-reference.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ @@ -369,9 +364,16 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra30-cardhu-a04.dtb \ tegra114-dalmore.dtb \ tegra124-venice2.dtb +dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb +dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ + ste-hrefprev60-stuib.dtb \ + ste-hrefprev60-tvk.dtb \ + ste-hrefv60plus-stuib.dtb \ + ste-hrefv60plus-tvk.dtb \ + ste-ccu8540.dtb \ + ste-ccu9540.dtb dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ versatile-pb.dtb -dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index e3f27ec31718..2e7d932887b5 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -183,7 +183,7 @@ &usb { status = "okay"; - control@44e10000 { + control@44e10620 { status = "okay"; }; @@ -204,7 +204,7 @@ dr_mode = "host"; }; - dma-controller@07402000 { + dma-controller@47402000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 28ae040e7c3d..6028217ace0f 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -301,8 +301,8 @@ am335x_evm_audio_pins: am335x_evm_audio_pins { pinctrl-single,pins = < - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rx_dv.mcasp1_aclkx */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_txd3.mcasp1_fsx */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ >; @@ -331,7 +331,7 @@ &usb { status = "okay"; - control@44e10000 { + control@44e10620 { status = "okay"; }; @@ -352,7 +352,7 @@ dr_mode = "host"; }; - dma-controller@07402000 { + dma-controller@47402000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index ec08f6f677c3..ab238850a7b2 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -364,7 +364,7 @@ &usb { status = "okay"; - control@44e10000 { + control@44e10620 { status = "okay"; }; @@ -385,7 +385,7 @@ dr_mode = "host"; }; - dma-controller@07402000 { + dma-controller@47402000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 7063311a58d9..9f22c189f636 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -118,7 +118,6 @@ reg = <0 0 0>; /* CS0, offset 0 */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; - gpmc,device-nand = "true"; gpmc,device-width = <1>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; @@ -202,7 +201,7 @@ &usb { status = "okay"; - control@44e10000 { + control@44e10620 { status = "okay"; }; @@ -223,7 +222,7 @@ dr_mode = "host"; }; - dma-controller@07402000 { + dma-controller@47402000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 9770e35f2536..cb6811e5ae5a 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -72,7 +72,7 @@ }; /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { @@ -94,8 +94,8 @@ /* * XXX: Use a flat representation of the AM33XX interconnect. - * The real AM33XX interconnect network is quite complex.Since - * that will not bring real advantage to represent that in DT + * The real AM33XX interconnect network is quite complex. Since + * it will not bring real advantage to represent that in DT * for the moment, just use a fake OCP bus entry to represent * the whole bus hierarchy. */ @@ -802,7 +802,7 @@ <0x46000000 0x400000>; reg-names = "mpu", "dat"; interrupts = <80>, <81>; - interrupts-names = "tx", "rx"; + interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 8>, <&edma 9>; @@ -816,7 +816,7 @@ <0x46400000 0x400000>; reg-names = "mpu", "dat"; interrupts = <82>, <83>; - interrupts-names = "tx", "rx"; + interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 10>, <&edma 11>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 36d523a26831..d1f8707ff1df 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -691,7 +691,7 @@ <0x46000000 0x400000>; reg-names = "mpu", "dat"; interrupts = <80>, <81>; - interrupts-names = "tx", "rx"; + interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 8>, <&edma 9>; @@ -705,7 +705,7 @@ <0x46400000 0x400000>; reg-names = "mpu", "dat"; interrupts = <82>, <83>; - interrupts-names = "tx", "rx"; + interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 10>, <&edma 11>; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index bbb40f62037d..bb77970c0b12 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -230,6 +230,7 @@ #size-cells = <0>; compatible = "marvell,orion-mdio"; reg = <0x72004 0x4>; + clocks = <&gateclk 4>; }; eth1: ethernet@74000 { diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index a064f59da02d..ca8813bb99ba 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -336,6 +336,7 @@ #size-cells = <0>; compatible = "marvell,orion-mdio"; reg = <0x72004 0x4>; + clocks = <&gateclk 4>; }; coredivclk: clock@e4250 { diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts index a542d5837a17..27ebb0f722fd 100644 --- a/arch/arm/boot/dts/at91-cosino_mega2560.dts +++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts @@ -32,11 +32,6 @@ status = "okay"; }; - - tsadcc: tsadcc@f804c000 { - status = "okay"; - }; - rtc@fffffeb0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index ce1375595e5f..f1a11193fba2 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -21,6 +21,14 @@ reg = <0x20000000 0x10000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + ahb { apb { mmc0: mmc@f0000000 { diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index e21dda0e8986..561addceb81e 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -45,6 +45,18 @@ reg = <0x20000000 0x08000000>; }; + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -524,17 +536,24 @@ #size-cells = <0>; #interrupt-cells = <1>; - clk32k: slck { + slow_rc_osc: slow_rc_osc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9260-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_xtal>; }; main: mainck { compatible = "atmel,at91rm9200-clk-main"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&clk32k>; + clocks = <&main_xtal>; }; plla: pllack { diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 2ce527e70c7a..c6683ea8b743 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -20,6 +20,10 @@ reg = <0x20000000 0x4000000>; }; + main_xtal { + clock-frequency = <18432000>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 63e1784d272c..a19a7c26a7fc 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -48,6 +48,18 @@ reg = <0x20000000 0x04000000>; }; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -548,17 +560,11 @@ #size-cells = <0>; #interrupt-cells = <1>; - clk32k: slck { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - main: mainck { compatible = "atmel,at91rm9200-clk-main"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&clk32k>; + clocks = <&main_xtal>; }; plla: pllack { @@ -769,6 +775,32 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; status = "disabled"; }; + + sckc@fffffd50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffd50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <1200000>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <75>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index cddb37825fad..b3b89baf972e 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -20,6 +20,15 @@ reg = <0x20000000 0x4000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 1c0f8e1893ae..149b55099935 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -80,7 +80,7 @@ }; /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { @@ -94,7 +94,7 @@ /* * XXX: Use a flat representation of the SOC interconnect. * The real OMAP interconnect network is quite complex. - * Since that will not bring real advantage to represent that in DT for + * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index e96da9a898ad..cfb8fc753f50 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1640,7 +1640,7 @@ #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; - ti,bit-shift = <28>; + ti,bit-shift = <24>; reg = <0x1860>; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 32f760e24898..ea323f09dc78 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -56,6 +56,7 @@ osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts index 09f57b39e3ef..73aae4f5e539 100644 --- a/arch/arm/boot/dts/imx27-apf27.dts +++ b/arch/arm/boot/dts/imx27-apf27.dts @@ -29,6 +29,7 @@ osc26m { compatible = "fsl,imx-osc26m", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 6279e0b4f768..137e010eab35 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -48,6 +48,7 @@ osc26m { compatible = "fsl,imx-osc26m", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 0c75fe3deb35..9c89d1ca97c2 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -53,21 +53,25 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <22579200>; }; ckih2 { compatible = "fsl,imx-ckih2", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 5f8216d08f6b..150bb4e2f744 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -50,21 +50,25 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; ckih2 { compatible = "fsl,imx-ckih2", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index f6d3ac3e5587..d5d146a8b149 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -17,7 +17,8 @@ compatible = "denx,imx53-m53evk", "fsl,imx53"; memory { - reg = <0x70000000 0x20000000>; + reg = <0x70000000 0x20000000>, + <0xb0000000 0x20000000>; }; soc { @@ -193,17 +194,17 @@ irq-trigger = <0x1>; stmpe_touchscreen { - compatible = "stmpe,ts"; + compatible = "st,stmpe-ts"; reg = <0>; - ts,sample-time = <4>; - ts,mod-12b = <1>; - ts,ref-sel = <0>; - ts,adc-freq = <1>; - ts,ave-ctrl = <3>; - ts,touch-det-delay = <3>; - ts,settling = <4>; - ts,fraction-z = <7>; - ts,i-drive = <1>; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <3>; + st,touch-det-delay = <3>; + st,settling = <4>; + st,fraction-z = <7>; + st,i-drive = <1>; }; }; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 3f825a6813da..ede04fa4161f 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -14,7 +14,8 @@ / { memory { - reg = <0x70000000 0x40000000>; + reg = <0x70000000 0x20000000>, + <0xb0000000 0x20000000>; }; display0: display@di0 { diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts index 0217dde3b36b..3b73e81dc3f0 100644 --- a/arch/arm/boot/dts/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts @@ -25,12 +25,17 @@ soc { display: display@di0 { compatible = "fsl,imx-parallel-display"; - crtcs = <&ipu 0>; interface-pix-fmt = "rgb24"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rgb24_vga1>; status = "okay"; + port { + display0_in: endpoint { + remote-endpoint = <&ipu_di0_disp0>; + }; + }; + display-timings { VGA { clock-frequency = <25200000>; @@ -293,6 +298,10 @@ }; }; +&ipu_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + &kpp { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_kpp>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index b57ab57740f6..9c2bff2252d0 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -70,21 +70,25 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <22579200>; }; ckih2 { compatible = "fsl,imx-ckih2", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; @@ -430,7 +434,7 @@ port { lvds1_in: endpoint { - remote-endpoint = <&ipu_di0_lvds0>; + remote-endpoint = <&ipu_di1_lvds1>; }; }; }; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index a63bbb3d46bb..e4ae38fd0269 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -19,7 +19,10 @@ compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q"; aliases { - gpio7 = &stmpe_gpio; + gpio7 = &stmpe_gpio1; + gpio8 = &stmpe_gpio2; + stmpe-i2c0 = &stmpe1; + stmpe-i2c1 = &stmpe2; }; memory { @@ -40,13 +43,15 @@ regulator-always-on; }; - reg_usb_otg_vbus: regulator@1 { + reg_usb_otg_switch: regulator@1 { compatible = "regulator-fixed"; reg = <1>; - regulator-name = "usb_otg_vbus"; + regulator-name = "usb_otg_switch"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio7 12 0>; + regulator-boot-on; + regulator-always-on; }; reg_usb_host1: regulator@2 { @@ -65,23 +70,23 @@ led-blue { label = "blue"; - gpios = <&stmpe_gpio 8 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; led-green { label = "green"; - gpios = <&stmpe_gpio 9 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>; }; led-pink { label = "pink"; - gpios = <&stmpe_gpio 10 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>; }; led-red { label = "red"; - gpios = <&stmpe_gpio 11 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>; }; }; }; @@ -99,7 +104,8 @@ clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2 - &pinctrl_stmpe>; + &pinctrl_stmpe1 + &pinctrl_stmpe2>; status = "okay"; pmic: pfuze100@08 { @@ -205,13 +211,25 @@ }; }; - stmpe: stmpe1601@40 { + stmpe1: stmpe1601@40 { compatible = "st,stmpe1601"; reg = <0x40>; interrupts = <30 0>; interrupt-parent = <&gpio3>; - stmpe_gpio: stmpe_gpio { + stmpe_gpio1: stmpe_gpio { + #gpio-cells = <2>; + compatible = "st,stmpe-gpio"; + }; + }; + + stmpe2: stmpe1601@44 { + compatible = "st,stmpe1601"; + reg = <0x44>; + interrupts = <2 0>; + interrupt-parent = <&gpio5>; + + stmpe_gpio2: stmpe_gpio { #gpio-cells = <2>; compatible = "st,stmpe-gpio"; }; @@ -273,10 +291,14 @@ >; }; - pinctrl_stmpe: stmpegrp { + pinctrl_stmpe1: stmpe1grp { fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>; }; + pinctrl_stmpe2: stmpe2grp { + fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -293,7 +315,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 >; }; @@ -344,11 +366,11 @@ &usbh1 { vbus-supply = <®_usb_host1>; disable-over-current; + dr_mode = "host"; status = "okay"; }; &usbotg { - vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 902f98310481..e51bb3f0fd56 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -487,9 +487,6 @@ &ldb { status = "okay"; - lvds-channel@0 { - crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>; - }; }; &pcie { diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 8e99c9a9bc76..035d3a85c318 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -436,9 +436,6 @@ &ldb { status = "okay"; - lvds-channel@0 { - crtcs = <&ipu1 0>, <&ipu1 1>; - }; }; &pcie { diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index a3cb2fff8f61..d16066608e21 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -26,25 +26,25 @@ /* GPIO16 -> AR8035 25MHz */ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 /* AR8035 pin strapping: IO voltage: pull up */ - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 /* AR8035 pin strapping: PHYADDR#0: pull down */ - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 /* AR8035 pin strapping: PHYADDR#1: pull down */ - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 /* AR8035 pin strapping: MODE#1: pull up */ - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 /* AR8035 pin strapping: MODE#3: pull up */ - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 /* AR8035 pin strapping: MODE#0: pull down */ - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 /* * As the RMII pins are also connected to RGMII diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 55cb926fa3f7..eca0971d4db1 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -10,6 +10,8 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/interrupt-controller/arm-gic.h> + #include "skeleton.dtsi" / { @@ -46,8 +48,6 @@ intc: interrupt-controller@00a01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; @@ -59,16 +59,19 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; @@ -138,6 +141,12 @@ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>; clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi"; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 864d8dfb51ca..a8d9a93fab85 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -282,6 +282,7 @@ MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1 MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1 MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1 + MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x80000000 >; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 3cb4941afeef..d26b099260a3 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -68,8 +68,6 @@ intc: interrupt-controller@00a01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; @@ -81,11 +79,13 @@ ckil { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; osc { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts index 40791053106b..6becedebaa4e 100644 --- a/arch/arm/boot/dts/kirkwood-b3.dts +++ b/arch/arm/boot/dts/kirkwood-b3.dts @@ -75,7 +75,7 @@ m25p16@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p16"; + compatible = "st,m25p16"; reg = <0>; spi-max-frequency = <40000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index 0e06fd3cee4d..3b62aeeaa3a2 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -46,7 +46,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mx25l4005a"; + compatible = "mxicy,mx25l4005a"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index ef3463e0ae19..28b3ee369778 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -43,7 +43,7 @@ m25p40@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mx25l1606e"; + compatible = "mxicy,mx25l1606e"; reg = <0>; spi-max-frequency = <50000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts index c9e82eff9bf2..6761ffa2c4ab 100644 --- a/arch/arm/boot/dts/kirkwood-laplug.dts +++ b/arch/arm/boot/dts/kirkwood-laplug.dts @@ -48,7 +48,7 @@ status = "okay"; eeprom@50 { - compatible = "at,24c04"; + compatible = "atmel,24c04"; pagesize = <16>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index 2cb0dc529165..32c6fb4a1162 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -56,7 +56,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mx25l12805d"; + compatible = "mxicy,mx25l12805d"; reg = <0>; spi-max-frequency = <50000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 743152f31a81..e6e5ec4fe6b9 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -32,7 +32,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mx25l4005a"; + compatible = "mxicy,mx25l4005a"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; @@ -50,7 +50,7 @@ status = "okay"; eeprom@50 { - compatible = "at,24c04"; + compatible = "atmel,24c04"; pagesize = <16>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 03fa24cf3344..0a07af9d8e58 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -104,7 +104,7 @@ status = "okay"; adt7476: adt7476a@2e { - compatible = "adt7476"; + compatible = "adi,adt7476"; reg = <0x2e>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts index a5e779452867..27ca6a79c48a 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310a.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts @@ -94,7 +94,7 @@ status = "okay"; lm85: lm85@2e { - compatible = "lm85"; + compatible = "national,lm85"; reg = <0x2e>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index b88da9392c32..0650beafc1de 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -40,7 +40,7 @@ pinctrl-names = "default"; s35390a: s35390a@30 { - compatible = "s35390a"; + compatible = "sii,s35390a"; reg = <0x30>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts index b2f7cae06839..38520a287514 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts @@ -52,7 +52,7 @@ pinctrl-names = "default"; s24c02: s24c02@50 { - compatible = "24c02"; + compatible = "atmel,24c02"; reg = <0x50>; }; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm-ab.dts b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts new file mode 100644 index 000000000000..7ac3bcf59d59 --- /dev/null +++ b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-beagle-xm.dts" + +/ { + /* HS USB Port 2 Power enable was inverted with the xM C */ + hsusb2_power: hsusb2_power_reg { + enable-active-high; + }; +}; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index bf5a515a3247..da402f0fdab4 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -112,7 +112,6 @@ reg = <0 0 0>; /* CS0, offset 0 */ nand-bus-width = <16>; - gpmc,device-nand; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index 6369d9f43ca2..cc1dce6978f5 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -368,7 +368,6 @@ /* no elm on omap3 */ gpmc,mux-add-data = <0>; - gpmc,device-nand; gpmc,device-width = <2>; gpmc,wait-pin = <0>; gpmc,wait-monitoring-ns = <0>; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 5e5790f631eb..acb9019dc437 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -74,7 +74,7 @@ /* * XXX: Use a flat representation of the OMAP3 interconnect. * The real OMAP interconnect network is quite complex. - * Since that will not bring real advantage to represent that in DT for + * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 27fcac874742..649b5cd38b40 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -72,7 +72,7 @@ }; /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { @@ -96,7 +96,7 @@ /* * XXX: Use a flat representation of the OMAP4 interconnect. * The real OMAP interconnect network is quite complex. - * Since that will not bring real advantage to represent that in DT for + * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 6f3de22fb266..f8c9855ce587 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -93,7 +93,7 @@ }; /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { @@ -107,7 +107,7 @@ /* * XXX: Use a flat representation of the OMAP3 interconnect. * The real OMAP interconnect network is quite complex. - * Since that will not bring real advantage to represent that in DT for + * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ @@ -813,6 +813,12 @@ <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_usb3phy>; + clocks = <&usb_phy_cm_clk32k>, + <&sys_clkin>, + <&usb_otg_ss_refclk960m>; + clock-names = "wkupclk", + "sysclk", + "refclk"; #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts new file mode 100644 index 000000000000..c701e8d16bbb --- /dev/null +++ b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts @@ -0,0 +1,236 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "LaCie d2 Network"; + compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + front_button { + label = "Front Push Button"; + linux,code = <KEY_POWER>; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; + }; + + power_rocker_sw_on { + label = "Power rocker switch (on|auto)"; + linux,input-type = <5>; /* EV_SW */ + linux,code = <1>; /* D2NET_SWITCH_POWER_ON */ + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + power_rocker_sw_off { + label = "Power rocker switch (auto|off)"; + linux,input-type = <5>; /* EV_SW */ + linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */ + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>; + pinctrl-names = "default"; + + sata0_power: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "SATA0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>; + }; + + sata1_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + devbus,keep-config; + + /* + * Currently the MTD code does not recognize the MX29LV400CBCT + * as a bottom-type device. This could cause risks of + * accidentally erasing critical flash sectors. We thus define + * a single, write-protected partition covering the whole + * flash. TODO: once the flash part TOP/BOTTOM detection + * issue is sorted out in the MTD code, break this into at + * least three partitions: 'u-boot code', 'u-boot environment' + * and 'whatever is left'. + */ + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x80000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Full512Kb"; + reg = <0 0x80000>; + read-only; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@32 { + compatible = "ricoh,rs5c372b"; + reg = <0x32>; + }; + + fan@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + + /* Not enough HW info */ + status = "disabled"; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>; + pinctrl-names = "default"; + + pmx_board_id: pmx-board-id { + marvell,pins = "mpp0", "mpp1", "mpp2"; + marvell,function = "gpio"; + }; + + pmx_buttons: pmx-buttons { + marvell,pins = "mpp8", "mpp9", "mpp18"; + marvell,function = "gpio"; + }; + + pmx_fan_fail: pmx-fan-fail { + marvell,pins = "mpp5"; + marvell,function = "gpio"; + }; + + /* + * MPP6: Red front LED + * MPP16: Blue front LED blink control + */ + pmx_leds: pmx-leds { + marvell,pins = "mpp6", "mpp16"; + marvell,function = "gpio"; + }; + + pmx_sata0_led_active: pmx-sata0-led-active { + marvell,pins = "mpp14"; + marvell,function = "sata0"; + }; + + pmx_sata0_power: pmx-sata0-power { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_sata1_led_active: pmx-sata1-led-active { + marvell,pins = "mpp15"; + marvell,function = "sata1"; + }; + + pmx_sata1_power: pmx-sata1-power { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + /* + * Non MPP GPIOs: + * GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok) + * GPIO 23: Blue front LED off + * GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled) + */ +}; + +&sata { + pinctrl-0 = <&pmx_sata0_led_active + &pmx_sata1_led_active>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts index 5ed6c1376901..89ff404a528c 100644 --- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -6,8 +6,19 @@ * warranty of any kind, whether express or implied. */ +/* + * TODO: add Orion USB device port init when kernel.org support is added. + * TODO: add flash write support: see below. + * TODO: add power-off support. + * TODO: add I2C EEPROM support. + */ + /dts-v1/; -/include/ "orion5x.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "orion5x-mv88f5182.dtsi" / { model = "LaCie Ethernet Disk mini V2"; @@ -19,49 +30,84 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; }; - ocp@f1000000 { - serial@12000 { - clock-frequency = <166666667>; - status = "okay"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; + pinctrl-0 = <&pmx_power_button>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; button@1 { label = "Power-on Switch"; - linux,code = <116>; /* KEY_POWER */ - gpios = <&gpio0 18 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; }; }; - gpio_leds { + gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_power_led>; + pinctrl-names = "default"; led@1 { label = "power:blue"; - gpios = <&gpio0 16 1>; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; }; }; }; -&mdio { +&devbus_bootcs { status = "okay"; - ethphy: ethernet-phy { - reg = <8>; + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <90000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <186000>; + devbus,acc-next-ps = <186000>; + + /* Write parameters */ + devbus,wr-high-ps = <90000>; + devbus,wr-low-ps = <90000>; + devbus,ale-wr-ps = <90000>; + + /* + * Currently the MTD code does not recognize the MX29LV400CBCT + * as a bottom-type device. This could cause risks of + * accidentally erasing critical flash sectors. We thus define + * a single, write-protected partition covering the whole + * flash. TODO: once the flash part TOP/BOTTOM detection + * issue is sorted out in the MTD code, break this into at + * least three partitions: 'u-boot code', 'u-boot environment' + * and 'whatever is left'. + */ + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x80000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Full512Kb"; + reg = <0 0x80000>; + read-only; + }; }; }; +&ehci0 { + status = "okay"; +}; + ð { status = "okay"; @@ -69,3 +115,60 @@ phy-handle = <ðphy>; }; }; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_rtc &pmx_power_led_ctrl>; + pinctrl-names = "default"; + + pmx_power_button: pmx-power-button { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; + + pmx_power_led: pmx-power-led { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_power_led_ctrl: pmx-power-led-ctrl { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_rtc: pmx-rtc { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; +}; + +&sata { + pinctrl-0 = <&pmx_sata0 &pmx_sata1>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts new file mode 100644 index 000000000000..ff3484904294 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "Maxtor Shared Storage II"; + compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xff800000 0x40000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + power { + label = "Power"; + linux,code = <KEY_POWER>; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + devbus,keep-config; + + /* + * Currently the MTD code does not recognize the MX29LV400CBCT + * as a bottom-type device. This could cause risks of + * accidentally erasing critical flash sectors. We thus define + * a single, write-protected partition covering the whole + * flash. TODO: once the flash part TOP/BOTTOM detection + * issue is sorted out in the MTD code, break this into at + * least three partitions: 'u-boot code', 'u-boot environment' + * and 'whatever is left'. + */ + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x40000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@68 { + compatible = "st,m41t81"; + reg = <0x68>; + pinctrl-0 = <&pmx_rtc>; + pinctrl-names = "default"; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_leds &pmx_misc>; + pinctrl-names = "default"; + + pmx_buttons: pmx-buttons { + marvell,pins = "mpp11", "mpp12"; + marvell,function = "gpio"; + }; + + /* + * MPP0: Power LED + * MPP1: Error LED + */ + pmx_leds: pmx-leds { + marvell,pins = "mpp0", "mpp1"; + marvell,function = "gpio"; + }; + + /* + * MPP4: HDD ind. (Single/Dual) + * MPP5: HD0 5V control + * MPP6: HD0 12V control + * MPP7: HD1 5V control + * MPP8: HD1 12V control + */ + pmx_misc: pmx-misc { + marvell,pins = "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", "mpp10"; + marvell,function = "gpio"; + }; + + pmx_rtc: pmx-rtc { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_sata0_led_active: pmx-sata0-led-active { + marvell,pins = "mpp14"; + marvell,function = "sata0"; + }; + + pmx_sata1_led_active: pmx-sata1-led-active { + marvell,pins = "mpp15"; + marvell,function = "sata1"; + }; + + /* + * Non MPP GPIOs: + * GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok) + * GPIO 23: Blue front LED off + * GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled) + */ +}; + +&sata { + pinctrl-0 = <&pmx_sata0_led_active + &pmx_sata1_led_active>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi new file mode 100644 index 000000000000..d1ed71c60209 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include "orion5x.dtsi" + +/ { + compatible = "marvell,orion5x-88f5182", "marvell,orion5x"; + + soc { + compatible = "marvell,orion5x-88f5182-mbus", "simple-bus"; + + internal-regs { + pinctrl: pinctrl@10000 { + compatible = "marvell,88f5182-pinctrl"; + reg = <0x10000 0x8>, <0x10050 0x4>; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp12", "mpp14"; + marvell,function = "sata0"; + }; + + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp13", "mpp15"; + marvell,function = "sata1"; + }; + }; + + core_clk: core-clocks@10030 { + compatible = "marvell,mv88f5182-core-clock"; + reg = <0x10010 0x4>; + #clock-cells = <1>; + }; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x1500 0x20>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts new file mode 100644 index 000000000000..6fb052507b36 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "Marvell Reference Design 88F5182 NAS"; + compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>, + <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_debug_led>; + pinctrl-names = "default"; + + led@0 { + label = "rd88f5182:cpu"; + linux,default-trigger = "heartbeat"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <90000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <186000>; + devbus,acc-next-ps = <186000>; + + /* Write parameters */ + devbus,wr-high-ps = <90000>; + devbus,wr-low-ps = <90000>; + devbus,ale-wr-ps = <90000>; + + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x80000>; + bank-width = <1>; + }; +}; + +&devbus_cs1 { + status = "okay"; + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <90000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <186000>; + devbus,acc-next-ps = <186000>; + + /* Write parameters */ + devbus,wr-high-ps = <90000>; + devbus,wr-low-ps = <90000>; + devbus,ale-wr-ps = <90000>; + + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x1000000>; + bank-width = <1>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@68 { + pinctrl-0 = <&pmx_rtc>; + pinctrl-names = "default"; + compatible = "dallas,ds1338"; + reg = <0x68>; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios + &pmx_pci_gpios>; + pinctrl-names = "default"; + + /* + * MPP[20] PCI Clock to MV88F5182 + * MPP[21] PCI Clock to mini PCI CON11 + * MPP[22] USB 0 over current indication + * MPP[23] USB 1 over current indication + * MPP[24] USB 1 over current enable + * MPP[25] USB 0 over current enable + */ + + pmx_debug_led: pmx-debug_led { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + + pmx_reset_switch: pmx-reset-switch { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_rtc: pmx-rtc { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_misc_gpios: pmx-misc-gpios { + marvell,pins = "mpp4", "mpp5"; + marvell,function = "gpio"; + }; + + pmx_pci_gpios: pmx-pci-gpios { + marvell,pins = "mpp6", "mpp7"; + marvell,function = "gpio"; + }; +}; + +&sata { + pinctrl-0 = <&pmx_sata0 &pmx_sata1>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index 174d89241f70..75cd01bd6024 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -6,7 +6,9 @@ * warranty of any kind, whether express or implied. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" + +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { model = "Marvell Orion5x SoC"; @@ -17,149 +19,214 @@ gpio0 = &gpio0; }; - intc: interrupt-controller { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xf1020200 0x08>; - }; - - ocp@f1000000 { - compatible = "simple-bus"; - ranges = <0x00000000 0xf1000000 0x4000000 - 0xf2200000 0xf2200000 0x0000800>; - #address-cells = <1>; + soc { + #address-cells = <2>; #size-cells = <1>; + controller = <&mbusc>; - gpio0: gpio@10100 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0x10100 0x40>; - ngpios = <32>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <6>, <7>, <8>, <9>; - }; - - spi@10600 { - compatible = "marvell,orion-spi"; + devbus_bootcs: devbus-bootcs { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x1046C 0x4>; + ranges = <0 MBUS_ID(0x01, 0x0f) 0 0xffffffff>; #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - reg = <0x10600 0x28>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; + devbus_cs0: devbus-cs0 { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x1045C 0x4>; + ranges = <0 MBUS_ID(0x01, 0x1e) 0 0xffffffff>; #address-cells = <1>; - #size-cells = <0>; - interrupts = <5>; - clock-frequency = <100000>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - serial@12000 { - compatible = "ns16550a"; - reg = <0x12000 0x100>; - reg-shift = <2>; - interrupts = <3>; - /* set clock-frequency in board dts */ + devbus_cs1: devbus-cs1 { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10460 0x4>; + ranges = <0 MBUS_ID(0x01, 0x1d) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - serial@12100 { - compatible = "ns16550a"; - reg = <0x12100 0x100>; - reg-shift = <2>; - interrupts = <4>; - /* set clock-frequency in board dts */ + devbus_cs2: devbus-cs2 { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10464 0x4>; + ranges = <0 MBUS_ID(0x01, 0x1b) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - wdt@20300 { - compatible = "marvell,orion-wdt"; - reg = <0x20300 0x28>; - status = "okay"; - }; + internal-regs { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <6>, <7>, <8>, <9>; + }; - ehci@50000 { - compatible = "marvell,orion-ehci"; - reg = <0x50000 0x1000>; - interrupts = <17>; - status = "disabled"; - }; + spi: spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + reg = <0x10600 0x28>; + status = "disabled"; + }; - xor@60900 { - compatible = "marvell,orion-xor"; - reg = <0x60900 0x100 - 0x60b00 0x100>; - status = "okay"; + i2c: i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <5>; + clocks = <&core_clk 0>; + status = "disabled"; + }; - xor00 { - interrupts = <30>; - dmacap,memcpy; - dmacap,xor; + uart0: serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <3>; + clocks = <&core_clk 0>; + status = "disabled"; }; - xor01 { - interrupts = <31>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; + + uart1: serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <4>; + clocks = <&core_clk 0>; + status = "disabled"; }; - }; - eth: ethernet-controller@72000 { - compatible = "marvell,orion-eth"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72000 0x4000>; - marvell,tx-checksum-limit = <1600>; - status = "disabled"; + bridge_intc: bridge-interrupt-ctrl@20110 { + compatible = "marvell,orion-bridge-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20110 0x8>; + interrupts = <0>; + marvell,#interrupts = <4>; + }; - ethernet-port@0 { - compatible = "marvell,orion-eth-port"; - reg = <0>; - /* overwrite MAC address in bootloader */ - local-mac-address = [00 00 00 00 00 00]; - /* set phy-handle property in board file */ + intc: interrupt-controller@20200 { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20200 0x08>; }; - }; - mdio: mdio-bus@72004 { - compatible = "marvell,orion-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72004 0x84>; - interrupts = <22>; - status = "disabled"; + timer: timer@20300 { + compatible = "marvell,orion-timer"; + reg = <0x20300 0x20>; + interrupt-parent = <&bridge_intc>; + interrupts = <1>, <2>; + clocks = <&core_clk 0>; + }; - /* add phy nodes in board file */ - }; + wdt: wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + interrupt-parent = <&bridge_intc>; + interrupts = <3>; + status = "okay"; + }; - sata@80000 { - compatible = "marvell,orion-sata"; - reg = <0x80000 0x5000>; - interrupts = <29>; - status = "disabled"; + ehci0: ehci@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <17>; + status = "disabled"; + }; + + xor: dma-controller@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + status = "okay"; + + xor00 { + interrupts = <30>; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = <31>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; + + eth: ethernet-controller@72000 { + compatible = "marvell,orion-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethport: ethernet-port@0 { + compatible = "marvell,orion-eth-port"; + reg = <0>; + interrupts = <21>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + /* set phy-handle property in board file */ + }; + }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <22>; + status = "disabled"; + + /* add phy nodes in board file */ + }; + + sata: sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <29>; + status = "disabled"; + }; + + ehci1: ehci@a0000 { + compatible = "marvell,orion-ehci"; + reg = <0xa0000 0x1000>; + interrupts = <12>; + status = "disabled"; + }; }; - crypto@90000 { + cesa: crypto@90000 { compatible = "marvell,orion-crypto"; - reg = <0x90000 0x10000>, - <0xf2200000 0x800>; + reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>, + <MBUS_ID(0x09, 0x00) 0x0 0x800>; reg-names = "regs", "sram"; interrupts = <28>; status = "okay"; }; - - ehci@a0000 { - compatible = "marvell,orion-ehci"; - reg = <0xa0000 0x1000>; - interrupts = <12>; - status = "disabled"; - }; }; }; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 8280884bfa59..97a9545f5232 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -22,13 +22,13 @@ compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0x0>; + clock-frequency = <800000000>; }; }; gic: interrupt-controller@c2800000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; interrupt-controller; reg = <0xc2800000 0x1000>, <0xc2000000 0x1000>; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 6e99eb2df076..d01048ab3e77 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -141,12 +141,12 @@ }; sdhi0_pins: sd0 { - renesas,gpios = "sdhi0_data4", "sdhi0_ctrl"; + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; renesas,function = "sdhi0"; }; sdhi2_pins: sd2 { - renesas,gpios = "sdhi2_data4", "sdhi2_ctrl"; + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; renesas,function = "sdhi2"; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 618e5b537eaf..10b326bdf831 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -673,7 +673,7 @@ renesas,clock-indices = < R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 - R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_RT R8A7790_CLK_VSP1_SY + R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S >; clock-output-names = "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index bdd73e6657b2..de1b6977c69a 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -230,17 +230,17 @@ }; sdhi0_pins: sd0 { - renesas,gpios = "sdhi0_data4", "sdhi0_ctrl"; + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; renesas,function = "sdhi0"; }; sdhi1_pins: sd1 { - renesas,gpios = "sdhi1_data4", "sdhi1_ctrl"; + renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; renesas,function = "sdhi1"; }; sdhi2_pins: sd2 { - renesas,gpios = "sdhi2_data4", "sdhi2_ctrl"; + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; renesas,function = "sdhi2"; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 46181708e59c..aa1cba94196c 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -688,7 +688,7 @@ renesas,clock-indices = < R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 - R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_SY + R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S >; clock-output-names = "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index bb36596ea205..ed9a70af3e3f 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -149,7 +149,7 @@ uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_none>, + rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>, <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>; }; @@ -164,7 +164,7 @@ uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_none>, + rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>, <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>; }; @@ -179,7 +179,7 @@ uart2 { uart2_xfer: uart2-xfer { - rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_none>, + rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>, <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>; }; /* no rts / cts for uart2 */ @@ -187,7 +187,7 @@ uart3 { uart3_xfer: uart3-xfer { - rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_none>, + rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>, <RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index eabcfdbb403a..ceb274f24dbf 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -58,6 +58,18 @@ reg = <0x20000000 0x8000000>; }; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + clocks { adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; @@ -749,18 +761,29 @@ #size-cells = <0>; #interrupt-cells = <1>; - clk32k: slck { - compatible = "fixed-clock"; + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; #clock-cells = <0>; - clock-frequency = <32768>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCRCS>; + clock-frequency = <12000000>; + clock-accuracy = <50000000>; }; - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; #clock-cells = <0>; interrupt-parent = <&pmc>; interrupts = <AT91_PMC_MOSCS>; - clocks = <&clk32k>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91sam9x5-clk-main"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCSELS>; + clocks = <&main_rc_osc &main_osc>; }; plla: pllack { @@ -1089,6 +1112,32 @@ status = "disabled"; }; + sckc@fffffe50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffe50 0x4>; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + atmel,startup-time-usec = <75>; + }; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + atmel,startup-time-usec = <1200000>; + }; + + clk32k: slowck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; + rtc@fffffeb0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x30>; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index f55ed072c8e6..b0b1331c1974 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -18,6 +18,14 @@ reg = <0x20000000 0x20000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + ahb { apb { spi0: spi@f0004000 { diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index b7bd3b9a6753..5ecf552e1c00 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -34,7 +34,6 @@ gic: interrupt-controller@f0001000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; interrupt-controller; reg = <0xf0001000 0x1000>, <0xf0000100 0x100>; diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts index 3075d2d3a8be..0aa6fef5ce22 100644 --- a/arch/arm/boot/dts/spear320-hmi.dts +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 Evaluation Baord * - * Copyright 2012 Shiraz Hashim <shiraz.hashim@st.com> + * Copyright 2012 Shiraz Hashim <shiraz.linux.kernel@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi index f09fb10a3791..81df870e5ee6 100644 --- a/arch/arm/boot/dts/stih415-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi @@ -49,7 +49,7 @@ reg = <0xfe61f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfe610000 0x5000>; PIO0: gpio@fe610000 { @@ -187,7 +187,7 @@ reg = <0xfee0f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfee00000 0x8000>; PIO5: gpio@fee00000 { @@ -282,7 +282,7 @@ reg = <0xfe82f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfe820000 0x8000>; PIO13: gpio@fe820000 { @@ -423,7 +423,7 @@ reg = <0xfd6bf080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfd6b0000 0x3000>; PIO100: gpio@fd6b0000 { @@ -460,7 +460,7 @@ reg = <0xfd33f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfd330000 0x5000>; PIO103: gpio@fd330000 { diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index aeea304086eb..250d5ecc951e 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -53,7 +53,7 @@ reg = <0xfe61f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfe610000 0x6000>; PIO0: gpio@fe610000 { @@ -201,7 +201,7 @@ reg = <0xfee0f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfee00000 0x10000>; PIO5: gpio@fee00000 { @@ -333,7 +333,7 @@ reg = <0xfe82f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfe820000 0x6000>; PIO13: gpio@fe820000 { @@ -461,7 +461,7 @@ reg = <0xfd6bf080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfd6b0000 0x3000>; PIO100: gpio@fd6b0000 { @@ -498,7 +498,7 @@ reg = <0xfd33f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfd330000 0x5000>; PIO103: gpio@fd330000 { diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index cf45a1a39483..6d540a025148 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -233,19 +233,6 @@ status = "disabled"; }; - serial@0,70006400 { - compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; - reg = <0x0 0x70006400 0x0 0x40>; - reg-shift = <2>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA124_CLK_UARTE>; - resets = <&tegra_car 66>; - reset-names = "serial"; - dmas = <&apbdma 20>, <&apbdma 20>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - pwm@0,7000a000 { compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm"; reg = <0x0 0x7000a000 0x0 0x100>; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 7dd1d6ede525..ded361075aab 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -25,11 +25,13 @@ clocks { audio_ext { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24576000>; }; enet_ext { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <50000000>; }; }; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 804873367669..b8ce0aa7b157 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -45,11 +45,13 @@ sxosc { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; fxosc { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; @@ -72,8 +74,6 @@ intc: interrupt-controller@40002000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; interrupt-controller; reg = <0x40003000 0x1000>, <0x40002100 0x100>; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 511180769af5..c1176abc34d9 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -24,6 +24,7 @@ device_type = "cpu"; reg = <0>; clocks = <&clkc 3>; + clock-latency = <1000>; operating-points = < /* kHz uV */ 666667 1000000 @@ -54,6 +55,28 @@ interrupt-parent = <&intc>; ranges; + i2c0: zynq-i2c@e0004000 { + compatible = "cdns,i2c-r1p10"; + status = "disabled"; + clocks = <&clkc 38>; + interrupt-parent = <&intc>; + interrupts = <0 25 4>; + reg = <0xe0004000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: zynq-i2c@e0005000 { + compatible = "cdns,i2c-r1p10"; + status = "disabled"; + clocks = <&clkc 39>; + interrupt-parent = <&intc>; + interrupts = <0 48 4>; + reg = <0xe0005000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + }; + intc: interrupt-controller@f8f01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index c913f77a21eb..5e09cee33d42 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -34,6 +34,82 @@ phy-mode = "rgmii"; }; +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + i2cswitch@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + si570: clock-generator@5d { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x5d>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@54 { + compatible = "at,24c08"; + reg = <0x54>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + hwmon@52 { + compatible = "ti,ucd9248"; + reg = <52>; + }; + hwmon@53 { + compatible = "ti,ucd9248"; + reg = <53>; + }; + hwmon@54 { + compatible = "ti,ucd9248"; + reg = <54>; + }; + }; + }; +}; + &sdhci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 88f62c50382e..4cc9913078cd 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -35,6 +35,74 @@ phy-mode = "rgmii"; }; +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + i2cswitch@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + si570: clock-generator@5d { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x5d>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@54 { + compatible = "at,24c08"; + reg = <0x54>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + ucd90120@65 { + compatible = "ti,ucd90120"; + reg = <0x65>; + }; + }; + }; +}; + &sdhci0 { status = "okay"; }; diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c index 5774b6ea7ad5..f01c0ee0c87e 100644 --- a/arch/arm/common/bL_switcher.c +++ b/arch/arm/common/bL_switcher.c @@ -797,10 +797,8 @@ static int __init bL_switcher_init(void) { int ret; - if (MAX_NR_CLUSTERS != 2) { - pr_err("%s: only dual cluster systems are supported\n", __func__); - return -EINVAL; - } + if (!mcpm_is_available()) + return -ENODEV; cpu_notifier(bL_switcher_hotplug_callback, 0); diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index 1e361abc29eb..86fd60fefbc9 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -48,6 +48,11 @@ int __init mcpm_platform_register(const struct mcpm_platform_ops *ops) return 0; } +bool mcpm_is_available(void) +{ + return (platform_ops) ? true : false; +} + int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster) { if (!platform_ops) diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index e181a50fd65a..c6661a60025d 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -83,7 +83,6 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m -CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_ATMEL=y @@ -146,6 +145,8 @@ CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y CONFIG_DMATEST=m # CONFIG_IOMMU_SUPPORT is not set +CONFIG_IIO=y +CONFIG_AT91_ADC=y CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig index 85f846ae9ff2..5d7797d43d23 100644 --- a/arch/arm/configs/at91sam9rl_defconfig +++ b/arch/arm/configs/at91sam9rl_defconfig @@ -45,7 +45,6 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y @@ -65,6 +64,8 @@ CONFIG_MMC=y CONFIG_MMC_ATMELMCI=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_IIO=y +CONFIG_AT91_ADC=y CONFIG_EXT2_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig index 01004640ee4d..3df3f3a79ef4 100644 --- a/arch/arm/configs/bcm_defconfig +++ b/arch/arm/configs/bcm_defconfig @@ -132,7 +132,7 @@ CONFIG_CRC_ITU_T=y CONFIG_CRC7=y CONFIG_XZ_DEC=y CONFIG_AVERAGE=y -CONFIG_PINCTRL_CAPRI=y +CONFIG_PINCTRL_BCM281XX=y CONFIG_WATCHDOG=y CONFIG_BCM_KONA_WDT=y CONFIG_BCM_KONA_WDT_DEBUG=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index a9667957b757..a4e8d017f25b 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -226,7 +226,7 @@ CONFIG_USB_DWC3=m CONFIG_USB_TEST=y CONFIG_NOP_USB_XCEIV=y CONFIG_OMAP_USB2=y -CONFIG_OMAP_USB3=y +CONFIG_TI_PIPE3=y CONFIG_AM335X_PHY_USB=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index dc3881e07630..869fa18ebeb2 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -122,7 +122,6 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y -CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set CONFIG_LEGACY_PTY_COUNT=4 CONFIG_SERIAL_ATMEL=y diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index fd81a1b99cce..aaa95ab606a8 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -11,6 +11,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y # CONFIG_IOSCHED_CFQ is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_U300=y @@ -21,7 +22,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072" CONFIG_CPU_IDLE=y -CONFIG_FPE_NWFPE=y # CONFIG_SUSPEND is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set @@ -64,8 +64,8 @@ CONFIG_TMPFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_PREEMPT is not set -CONFIG_DEBUG_INFO=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 65f77885c167..d219d6a43238 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -1,16 +1,16 @@ # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_U8500=y CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y -CONFIG_MACH_UX500_DT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT=y @@ -34,16 +34,22 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_NETFILTER=y CONFIG_PHONET=y -# CONFIG_WIRELESS is not set +CONFIG_CFG80211=y +CONFIG_CFG80211_DEBUGFS=y +CONFIG_MAC80211=y +CONFIG_MAC80211_LEDS=y CONFIG_CAIF=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_SENSORS_BH1780=y CONFIG_NETDEVICES=y CONFIG_SMSC911X=y CONFIG_SMSC_PHY=y -# CONFIG_WLAN is not set +CONFIG_CW1200=y +CONFIG_CW1200_WLAN_SDIO=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -85,15 +91,12 @@ CONFIG_AB8500_USB=y CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y -# CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_LP5521=y -CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y @@ -103,6 +106,11 @@ CONFIG_STE_DMA40=y CONFIG_STAGING=y CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y CONFIG_HSEM_U8500=y +CONFIG_IIO=y +CONFIG_IIO_ST_ACCEL_3AXIS=y +CONFIG_IIO_ST_GYRO_3AXIS=y +CONFIG_IIO_ST_MAGN_3AXIS=y +CONFIG_IIO_ST_PRESS=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -110,8 +118,6 @@ CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_MISC_FILESYSTEMS is not set diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index c651e3b26ec7..4764344367d4 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -222,22 +222,22 @@ static inline int cpu_is_xsc3(void) #endif /* - * Marvell's PJ4 core is based on V7 version. It has some modification - * for coprocessor setting. For this reason, we need a way to distinguish - * it. + * Marvell's PJ4 and PJ4B cores are based on V7 version, + * but require a specical sequence for enabling coprocessors. + * For this reason, we need a way to distinguish them. */ -#ifndef CONFIG_CPU_PJ4 -#define cpu_is_pj4() 0 -#else +#if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B) static inline int cpu_is_pj4(void) { unsigned int id; id = read_cpuid_id(); - if ((id & 0xfffffff0) == 0x562f5840) + if ((id & 0xff0fff00) == 0x560f5800) return 1; return 0; } +#else +#define cpu_is_pj4() 0 #endif #endif diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h index 191ada6e4d2d..662c7bd06108 100644 --- a/arch/arm/include/asm/div64.h +++ b/arch/arm/include/asm/div64.h @@ -156,7 +156,7 @@ /* Select the best insn combination to perform the */ \ /* actual __m * __n / (__p << 64) operation. */ \ if (!__c) { \ - asm ( "umull %Q0, %R0, %1, %Q2\n\t" \ + asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" \ "mov %Q0, #0" \ : "=&r" (__res) \ : "r" (__m), "r" (__n) \ diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h index 608516ebabfe..a5ff410dcdb6 100644 --- a/arch/arm/include/asm/mcpm.h +++ b/arch/arm/include/asm/mcpm.h @@ -54,6 +54,13 @@ void mcpm_set_early_poke(unsigned cpu, unsigned cluster, */ /** + * mcpm_is_available - returns whether MCPM is initialized and available + * + * This returns true or false accordingly. + */ +bool mcpm_is_available(void); + +/** * mcpm_cpu_power_up - make given CPU in given cluster runable * * @cpu: CPU number within given cluster diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 0baf7f0d9394..f1a0dace3efe 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -98,15 +98,25 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb) } } -static inline void tlb_flush_mmu(struct mmu_gather *tlb) +static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb) { tlb_flush(tlb); +} + +static inline void tlb_flush_mmu_free(struct mmu_gather *tlb) +{ free_pages_and_swap_cache(tlb->pages, tlb->nr); tlb->nr = 0; if (tlb->pages == tlb->local) __tlb_alloc_page(tlb); } +static inline void tlb_flush_mmu(struct mmu_gather *tlb) +{ + tlb_flush_mmu_tlbonly(tlb); + tlb_flush_mmu_free(tlb); +} + static inline void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) { diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h index fb5584d0cc05..ba94446c72d9 100644 --- a/arch/arm/include/uapi/asm/unistd.h +++ b/arch/arm/include/uapi/asm/unistd.h @@ -408,6 +408,7 @@ #define __NR_finit_module (__NR_SYSCALL_BASE+379) #define __NR_sched_setattr (__NR_SYSCALL_BASE+380) #define __NR_sched_getattr (__NR_SYSCALL_BASE+381) +#define __NR_renameat2 (__NR_SYSCALL_BASE+382) /* * This may need to be greater than __NR_last_syscall+1 in order to diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index a766bcbaf8ad..040619c32d68 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -79,6 +79,7 @@ obj-$(CONFIG_CPU_XSCALE) += xscale-cp0.o obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o obj-$(CONFIG_CPU_PJ4) += pj4-cp0.o +obj-$(CONFIG_CPU_PJ4B) += pj4-cp0.o obj-$(CONFIG_IWMMXT) += iwmmxt.o obj-$(CONFIG_PERF_EVENTS) += perf_regs.o obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o perf_event_cpu.o diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 166e945de832..8f51bdcdacbb 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -391,6 +391,7 @@ CALL(sys_finit_module) /* 380 */ CALL(sys_sched_setattr) CALL(sys_sched_getattr) + CALL(sys_renameat2) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index f8c08839edf3..591d6e4a6492 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -587,7 +587,7 @@ __fixup_pv_table: add r6, r6, r3 @ adjust __pv_phys_pfn_offset address add r7, r7, r3 @ adjust __pv_offset address mov r0, r8, lsr #12 @ convert to PFN - str r0, [r6, #LOW_OFFSET] @ save computed PHYS_OFFSET to __pv_phys_pfn_offset + str r0, [r6] @ save computed PHYS_OFFSET to __pv_phys_pfn_offset strcc ip, [r7, #HIGH_OFFSET] @ save to __pv_offset high bits mov r6, r3, lsr #24 @ constant for add/sub instructions teq r3, r6, lsl #24 @ must be 16MiB aligned diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S index a08783823b32..2452dd1bef53 100644 --- a/arch/arm/kernel/iwmmxt.S +++ b/arch/arm/kernel/iwmmxt.S @@ -19,12 +19,16 @@ #include <asm/thread_info.h> #include <asm/asm-offsets.h> -#if defined(CONFIG_CPU_PJ4) +#if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B) #define PJ4(code...) code #define XSC(code...) -#else +#elif defined(CONFIG_CPU_MOHAWK) || \ + defined(CONFIG_CPU_XSC3) || \ + defined(CONFIG_CPU_XSCALE) #define PJ4(code...) #define XSC(code...) code +#else +#error "Unsupported iWMMXt architecture" #endif #define MMX_WR0 (0x00) diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index f0d180d8b29f..8cf0996aa1a8 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -184,3 +184,10 @@ void machine_kexec(struct kimage *image) soft_restart(reboot_entry_phys); } + +void arch_crash_save_vmcoreinfo(void) +{ +#ifdef CONFIG_ARM_LPAE + VMCOREINFO_CONFIG(ARM_LPAE); +#endif +} diff --git a/arch/arm/kernel/pj4-cp0.c b/arch/arm/kernel/pj4-cp0.c index fc7208636284..8153e36b2491 100644 --- a/arch/arm/kernel/pj4-cp0.c +++ b/arch/arm/kernel/pj4-cp0.c @@ -45,7 +45,7 @@ static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t) return NOTIFY_DONE; } -static struct notifier_block iwmmxt_notifier_block = { +static struct notifier_block __maybe_unused iwmmxt_notifier_block = { .notifier_call = iwmmxt_do, }; @@ -72,6 +72,33 @@ static void __init pj4_cp_access_write(u32 value) : "=r" (temp) : "r" (value)); } +static int __init pj4_get_iwmmxt_version(void) +{ + u32 cp_access, wcid; + + cp_access = pj4_cp_access_read(); + pj4_cp_access_write(cp_access | 0xf); + + /* check if coprocessor 0 and 1 are available */ + if ((pj4_cp_access_read() & 0xf) != 0xf) { + pj4_cp_access_write(cp_access); + return -ENODEV; + } + + /* read iWMMXt coprocessor id register p1, c0 */ + __asm__ __volatile__ ("mrc p1, 0, %0, c0, c0, 0\n" : "=r" (wcid)); + + pj4_cp_access_write(cp_access); + + /* iWMMXt v1 */ + if ((wcid & 0xffffff00) == 0x56051000) + return 1; + /* iWMMXt v2 */ + if ((wcid & 0xffffff00) == 0x56052000) + return 2; + + return -EINVAL; +} /* * Disable CP0/CP1 on boot, and let call_fpe() and the iWMMXt lazy @@ -79,17 +106,26 @@ static void __init pj4_cp_access_write(u32 value) */ static int __init pj4_cp0_init(void) { - u32 cp_access; + u32 __maybe_unused cp_access; + int vers; if (!cpu_is_pj4()) return 0; + vers = pj4_get_iwmmxt_version(); + if (vers < 0) + return 0; + +#ifndef CONFIG_IWMMXT + pr_info("PJ4 iWMMXt coprocessor detected, but kernel support is missing.\n"); +#else cp_access = pj4_cp_access_read() & ~0xf; pj4_cp_access_write(cp_access); - printk(KERN_INFO "PJ4 iWMMXt coprocessor enabled.\n"); + pr_info("PJ4 iWMMXt v%d coprocessor enabled.\n", vers); elf_hwcap |= HWCAP_IWMMXT; thread_register_notifier(&iwmmxt_notifier_block); +#endif return 0; } diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index 702bd329d9d0..e90a3148f385 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -203,9 +203,9 @@ asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd, int ret; switch (cmd) { - case F_GETLKP: - case F_SETLKP: - case F_SETLKPW: + case F_OFD_GETLK: + case F_OFD_SETLK: + case F_OFD_SETLKW: case F_GETLK64: case F_SETLK64: case F_SETLKW64: diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig index 466bd299b1a8..4be5bb150bdd 100644 --- a/arch/arm/kvm/Kconfig +++ b/arch/arm/kvm/Kconfig @@ -23,7 +23,7 @@ config KVM select HAVE_KVM_CPU_RELAX_INTERCEPT select KVM_MMIO select KVM_ARM_HOST - depends on ARM_VIRT_EXT && ARM_LPAE + depends on ARM_VIRT_EXT && ARM_LPAE && !CPU_BIG_ENDIAN ---help--- Support hosting virtualized guest machines. You will also need to select one or more of the processor modules below. diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 80bb1e6c2c29..16f804938b8f 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -42,6 +42,8 @@ static unsigned long hyp_idmap_start; static unsigned long hyp_idmap_end; static phys_addr_t hyp_idmap_vector; +#define pgd_order get_order(PTRS_PER_PGD * sizeof(pgd_t)) + #define kvm_pmd_huge(_x) (pmd_huge(_x) || pmd_trans_huge(_x)) static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) @@ -293,14 +295,14 @@ void free_boot_hyp_pgd(void) if (boot_hyp_pgd) { unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE); unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); - kfree(boot_hyp_pgd); + free_pages((unsigned long)boot_hyp_pgd, pgd_order); boot_hyp_pgd = NULL; } if (hyp_pgd) unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); - kfree(init_bounce_page); + free_page((unsigned long)init_bounce_page); init_bounce_page = NULL; mutex_unlock(&kvm_hyp_pgd_mutex); @@ -330,7 +332,7 @@ void free_hyp_pgds(void) for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE) unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); - kfree(hyp_pgd); + free_pages((unsigned long)hyp_pgd, pgd_order); hyp_pgd = NULL; } @@ -1024,7 +1026,7 @@ int kvm_mmu_init(void) size_t len = __hyp_idmap_text_end - __hyp_idmap_text_start; phys_addr_t phys_base; - init_bounce_page = kmalloc(PAGE_SIZE, GFP_KERNEL); + init_bounce_page = (void *)__get_free_page(GFP_KERNEL); if (!init_bounce_page) { kvm_err("Couldn't allocate HYP init bounce page\n"); err = -ENOMEM; @@ -1050,8 +1052,9 @@ int kvm_mmu_init(void) (unsigned long)phys_base); } - hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL); - boot_hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL); + hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, pgd_order); + boot_hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, pgd_order); + if (!hyp_pgd || !boot_hyp_pgd) { kvm_err("Hyp mode PGD not allocated\n"); err = -ENOMEM; diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index f3f19f21352a..4860918b411e 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -25,6 +25,7 @@ #include "board.h" #include "generic.h" +#include "gpio.h" /* -------------------------------------------------------------------- diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 8b1b0a870025..14a6e35801ff 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -24,12 +24,11 @@ #include <mach/at91sam9260_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_adc.h> #include <mach/hardware.h> #include "board.h" #include "generic.h" - +#include "gpio.h" /* -------------------------------------------------------------------- * USB Host @@ -1296,7 +1295,7 @@ static struct resource adc_resources[] = { }; static struct platform_device at91_adc_device = { - .name = "at91_adc", + .name = "at91sam9260-adc", .id = -1, .dev = { .platform_data = &adc_data, @@ -1325,13 +1324,6 @@ static struct at91_adc_trigger at91_adc_triggers[] = { }, }; -static struct at91_adc_reg_desc at91_adc_register_g20 = { - .channel_base = AT91_ADC_CHR(0), - .drdy_mask = AT91_ADC_DRDY, - .status_register = AT91_ADC_SR, - .trigger_register = AT91_ADC_MR, -}; - void __init at91_add_device_adc(struct at91_adc_data *data) { if (!data) @@ -1349,9 +1341,7 @@ void __init at91_add_device_adc(struct at91_adc_data *data) if (data->use_external_triggers) at91_set_A_periph(AT91_PIN_PA22, 0); - data->num_channels = 4; data->startup_time = 10; - data->registers = &at91_adc_register_g20; data->trigger_number = 4; data->trigger_list = at91_adc_triggers; diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 80e35895d28f..43b21f456f6e 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -29,7 +29,7 @@ #include "board.h" #include "generic.h" - +#include "gpio.h" /* -------------------------------------------------------------------- * USB Host diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 43d53d6156dd..953616e5dbcb 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -28,6 +28,7 @@ #include "board.h" #include "generic.h" +#include "gpio.h" /* -------------------------------------------------------------------- diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 5e6f498db0a8..9d3d544ac19c 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -182,7 +182,7 @@ static struct clk vdec_clk = { static struct clk adc_op_clk = { .name = "adc_op_clk", .type = CLK_TYPE_PERIPHERAL, - .rate_hz = 13200000, + .rate_hz = 300000, }; /* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */ diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 77b04c2edd78..d943363c1845 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -25,7 +25,6 @@ #include <linux/fb.h> #include <video/atmel_lcdc.h> -#include <mach/at91_adc.h> #include <mach/at91sam9g45.h> #include <mach/at91sam9g45_matrix.h> #include <mach/at91_matrix.h> @@ -39,6 +38,7 @@ #include "board.h" #include "generic.h" #include "clock.h" +#include "gpio.h" /* -------------------------------------------------------------------- @@ -1133,58 +1133,7 @@ static void __init at91_add_device_rtc(void) {} /* -------------------------------------------------------------------- - * Touchscreen - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE) -static u64 tsadcc_dmamask = DMA_BIT_MASK(32); -static struct at91_tsadcc_data tsadcc_data; - -static struct resource tsadcc_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_TSC, - .end = AT91SAM9G45_BASE_TSC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device at91sam9g45_tsadcc_device = { - .name = "atmel_tsadcc", - .id = -1, - .dev = { - .dma_mask = &tsadcc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &tsadcc_data, - }, - .resource = tsadcc_resources, - .num_resources = ARRAY_SIZE(tsadcc_resources), -}; - -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) -{ - if (!data) - return; - - at91_set_gpio_input(AT91_PIN_PD20, 0); /* AD0_XR */ - at91_set_gpio_input(AT91_PIN_PD21, 0); /* AD1_XL */ - at91_set_gpio_input(AT91_PIN_PD22, 0); /* AD2_YT */ - at91_set_gpio_input(AT91_PIN_PD23, 0); /* AD3_TB */ - - tsadcc_data = *data; - platform_device_register(&at91sam9g45_tsadcc_device); -} -#else -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * ADC + * ADC and touchscreen * -------------------------------------------------------------------- */ #if IS_ENABLED(CONFIG_AT91_ADC) @@ -1204,7 +1153,7 @@ static struct resource adc_resources[] = { }; static struct platform_device at91_adc_device = { - .name = "at91_adc", + .name = "at91sam9g45-adc", .id = -1, .dev = { .platform_data = &adc_data, @@ -1236,13 +1185,6 @@ static struct at91_adc_trigger at91_adc_triggers[] = { }, }; -static struct at91_adc_reg_desc at91_adc_register_g45 = { - .channel_base = AT91_ADC_CHR(0), - .drdy_mask = AT91_ADC_DRDY, - .status_register = AT91_ADC_SR, - .trigger_register = 0x08, -}; - void __init at91_add_device_adc(struct at91_adc_data *data) { if (!data) @@ -1268,9 +1210,7 @@ void __init at91_add_device_adc(struct at91_adc_data *data) if (data->use_external_triggers) at91_set_A_periph(AT91_PIN_PD28, 0); - data->num_channels = 8; data->startup_time = 40; - data->registers = &at91_adc_register_g45; data->trigger_number = 4; data->trigger_list = at91_adc_triggers; diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 57f12d86c0e6..a79960f57e6a 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -153,6 +153,11 @@ static struct clk ac97_clk = { .pmc_mask = 1 << AT91SAM9RL_ID_AC97C, .type = CLK_TYPE_PERIPHERAL, }; +static struct clk adc_op_clk = { + .name = "adc_op_clk", + .type = CLK_TYPE_PERIPHERAL, + .rate_hz = 1000000, +}; static struct clk *periph_clocks[] __initdata = { &pioA_clk, @@ -178,6 +183,7 @@ static struct clk *periph_clocks[] __initdata = { &udphs_clk, &lcdc_clk, &ac97_clk, + &adc_op_clk, // irq0 }; @@ -216,6 +222,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk), + CLKDEV_CON_ID("adc_clk", &tsc_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 428fc412aaf1..044ad8bc6963 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -23,9 +23,11 @@ #include <mach/at91sam9_smc.h> #include <mach/hardware.h> #include <linux/platform_data/dma-atmel.h> +#include <linux/platform_data/at91_adc.h> #include "board.h" #include "generic.h" +#include "gpio.h" /* -------------------------------------------------------------------- @@ -608,14 +610,13 @@ static void __init at91_add_device_tc(void) { } /* -------------------------------------------------------------------- - * Touchscreen + * ADC and Touchscreen * -------------------------------------------------------------------- */ -#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE) -static u64 tsadcc_dmamask = DMA_BIT_MASK(32); -static struct at91_tsadcc_data tsadcc_data; +#if IS_ENABLED(CONFIG_AT91_ADC) +static struct at91_adc_data adc_data; -static struct resource tsadcc_resources[] = { +static struct resource adc_resources[] = { [0] = { .start = AT91SAM9RL_BASE_TSC, .end = AT91SAM9RL_BASE_TSC + SZ_16K - 1, @@ -628,36 +629,71 @@ static struct resource tsadcc_resources[] = { } }; -static struct platform_device at91sam9rl_tsadcc_device = { - .name = "atmel_tsadcc", - .id = -1, - .dev = { - .dma_mask = &tsadcc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &tsadcc_data, +static struct platform_device at91_adc_device = { + .name = "at91sam9rl-adc", + .id = -1, + .dev = { + .platform_data = &adc_data, }, - .resource = tsadcc_resources, - .num_resources = ARRAY_SIZE(tsadcc_resources), + .resource = adc_resources, + .num_resources = ARRAY_SIZE(adc_resources), }; -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) +static struct at91_adc_trigger at91_adc_triggers[] = { + [0] = { + .name = "external-rising", + .value = 1, + .is_external = true, + }, + [1] = { + .name = "external-falling", + .value = 2, + .is_external = true, + }, + [2] = { + .name = "external-any", + .value = 3, + .is_external = true, + }, + [3] = { + .name = "continuous", + .value = 6, + .is_external = false, + }, +}; + +void __init at91_add_device_adc(struct at91_adc_data *data) { if (!data) return; - at91_set_A_periph(AT91_PIN_PA17, 0); /* AD0_XR */ - at91_set_A_periph(AT91_PIN_PA18, 0); /* AD1_XL */ - at91_set_A_periph(AT91_PIN_PA19, 0); /* AD2_YT */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* AD3_TB */ - - tsadcc_data = *data; - platform_device_register(&at91sam9rl_tsadcc_device); + if (test_bit(0, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA17, 0); + if (test_bit(1, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA18, 0); + if (test_bit(2, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA19, 0); + if (test_bit(3, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA20, 0); + if (test_bit(4, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PD6, 0); + if (test_bit(5, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PD7, 0); + + if (data->use_external_triggers) + at91_set_A_periph(AT91_PIN_PB15, 0); + + data->startup_time = 40; + data->trigger_number = 4; + data->trigger_list = at91_adc_triggers; + + adc_data = *data; + platform_device_register(&at91_adc_device); } #else -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {} +void __init at91_add_device_adc(struct at91_adc_data *data) {} #endif - /* -------------------------------------------------------------------- * RTC * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 35ab632bbf68..3f6dbcc34022 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -39,7 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" - +#include "gpio.h" static void __init onearm_init_early(void) { diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index f95e31cda4b3..597c649170aa 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -46,6 +46,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init afeb9260_init_early(void) diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 112e867c4abe..a30502c8d379 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -44,6 +44,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init cam60_init_early(void) diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 92983050a9bd..47313d3ee037 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -39,6 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init carmeva_init_early(void) diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 008527efdbcf..2037f78c84e7 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -48,6 +48,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init cpu9krea_init_early(void) { diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 42f1353a4baf..c094350c9314 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -43,6 +43,8 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" + static struct gpio_led cpuat91_leds[] = { { diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index e5fde215225b..0e35a45cf8d4 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -42,7 +42,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" - +#include "gpio.h" static void __init csb337_init_early(void) { diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index fdf11061c577..18d027f529a8 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -39,6 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init csb637_init_early(void) diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index f9be8161bbfa..aa457a8b22f5 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -38,6 +38,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init eb9200_init_early(void) diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index b2fcd71262ba..ede1373ccaba 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -42,6 +42,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init ecb_at91init_early(void) diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 77de410efc90..4e75321a8f2a 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -31,6 +31,8 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" + static void __init eco920_init_early(void) { diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 737c08563628..68f1ab6bd08f 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -37,6 +37,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init flexibity_init_early(void) { diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index c20a870ea9c9..8b22c60bb238 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -47,6 +47,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" /* * The FOX Board G20 hardware comes as the "Netus G20" board with diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index 416bae8435ee..b729dd1271bf 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -39,6 +39,7 @@ #include "generic.h" #include "gsia18s.h" #include "stamp9g20.h" +#include "gpio.h" static void __init gsia18s_init_early(void) { diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 88e2f5d2d16d..93b1df42f639 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -39,6 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init kafa_init_early(void) diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index 0c519d9ebffc..d58d36225e08 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -42,6 +42,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init kb9202_init_early(void) diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 5f25fa54eb93..b48d95ec5152 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -37,6 +37,7 @@ #include "sam9_smc.h" #include "generic.h" #include "stamp9g20.h" +#include "gpio.h" static void __init pcontrol_g20_init_early(void) diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index ab2b2ec36c14..2c0f2d554d84 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -43,6 +43,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init picotux200_init_early(void) diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 8b17dadc1aba..953cea416754 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -45,6 +45,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index f6d7f1958c7e..f28e8b74df4b 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -31,6 +31,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init rsi_ews_init_early(void) { diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 43ee4dc43b50..d24dda67e2d3 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -43,6 +43,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index f4f8735315da..65dea12d685e 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -49,6 +49,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 473546b9408b..4637432de08f 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -53,6 +53,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 2f931915c80c..cd2726ee5add 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -52,6 +52,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index f9cd1f2c7146..e1be6e25b380 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -50,6 +50,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" /* * board revision encoding diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index ef39078c8ce2..1ea61328f30d 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -50,6 +50,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) @@ -300,21 +301,13 @@ static struct atmel_lcdfb_pdata __initdata ek_lcdc_data; /* - * Touchscreen - */ -static struct at91_tsadcc_data ek_tsadcc_data = { - .adc_clock = 300000, - .pendet_debounce = 0x0d, - .ts_sample_hold_time = 0x0a, -}; - -/* - * ADCs + * ADCs and touchscreen */ static struct at91_adc_data ek_adc_data = { .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7), .use_external_triggers = true, .vref = 3300, + .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE, }; /* @@ -485,9 +478,7 @@ static void __init ek_board_init(void) at91_add_device_isi(&isi_data, true); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); - /* Touch Screen */ - at91_add_device_tsadcc(&ek_tsadcc_data); - /* ADC */ + /* ADC and touchscreen */ at91_add_device_adc(&ek_adc_data); /* Push Buttons */ ek_add_device_buttons(); diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 604eecf6cd70..b64648b4a1fc 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -18,6 +18,7 @@ #include <linux/clk.h> #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/platform_data/at91_adc.h> #include <video/atmel_lcdc.h> @@ -38,6 +39,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) @@ -229,12 +231,13 @@ static struct gpio_led ek_leds[] = { /* - * Touchscreen + * ADC + Touchscreen */ -static struct at91_tsadcc_data ek_tsadcc_data = { - .adc_clock = 1000000, - .pendet_debounce = 0x0f, - .ts_sample_hold_time = 0x03, +static struct at91_adc_data ek_adc_data = { + .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5), + .use_external_triggers = true, + .vref = 3300, + .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE, }; @@ -310,8 +313,8 @@ static void __init ek_board_init(void) at91_add_device_lcdc(&ek_lcdc_data); /* AC97 */ at91_add_device_ac97(&ek_ac97_data); - /* Touch Screen Controller */ - at91_add_device_tsadcc(&ek_tsadcc_data); + /* Touch Screen Controller + ADC */ + at91_add_device_adc(&ek_adc_data); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); /* Push Buttons */ diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index f1d49e929ccb..1b870e6def0c 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -38,6 +38,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" #define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x)) diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index e4a5ac17cdbc..3b575036ff96 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -32,6 +32,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" void __init stamp9g20_init_early(void) diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index be083771df2e..46fdb0c68a68 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -50,6 +50,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init yl9200_init_early(void) diff --git a/arch/arm/mach-at91/board.h b/arch/arm/mach-at91/board.h index 6c08b341167d..4e773b55bc2d 100644 --- a/arch/arm/mach-at91/board.h +++ b/arch/arm/mach-at91/board.h @@ -118,9 +118,6 @@ struct isi_platform_data; extern void __init at91_add_device_isi(struct isi_platform_data *data, bool use_pck_as_mck); - /* Touchscreen Controller */ -extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data); - /* CAN */ extern void __init at91_add_device_can(struct at91_can_data *data); diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index a5afcf76550e..12ed05bbdc5c 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -29,6 +29,7 @@ #include <mach/at91_pio.h> #include "generic.h" +#include "gpio.h" #define MAX_NB_GPIO_PER_BANK 32 diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/gpio.h index 5fc23771c154..eed465ab0dd7 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/gpio.h @@ -209,14 +209,6 @@ extern int at91_get_gpio_value(unsigned pin); extern void at91_gpio_suspend(void); extern void at91_gpio_resume(void); -#ifdef CONFIG_PINCTRL_AT91 -extern void at91_pinctrl_gpio_suspend(void); -extern void at91_pinctrl_gpio_resume(void); -#else -static inline void at91_pinctrl_gpio_suspend(void) {} -static inline void at91_pinctrl_gpio_resume(void) {} -#endif - #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h deleted file mode 100644 index c287307b9a3b..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_adc.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_adc.h - * - * Copyright (C) SAN People - * - * Analog-to-Digital Converter (ADC) registers. - * Based on AT91SAM9260 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_ADC_H -#define AT91_ADC_H - -#define AT91_ADC_CR 0x00 /* Control Register */ -#define AT91_ADC_SWRST (1 << 0) /* Software Reset */ -#define AT91_ADC_START (1 << 1) /* Start Conversion */ - -#define AT91_ADC_MR 0x04 /* Mode Register */ -#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */ -#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */ -#define AT91_ADC_TRGSEL_TC0 (0 << 1) -#define AT91_ADC_TRGSEL_TC1 (1 << 1) -#define AT91_ADC_TRGSEL_TC2 (2 << 1) -#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) -#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ -#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ -#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */ -#define AT91_ADC_PRESCAL_9G45 (0xff << 8) -#define AT91_ADC_PRESCAL_(x) ((x) << 8) -#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */ -#define AT91_ADC_STARTUP_9G45 (0x7f << 16) -#define AT91_ADC_STARTUP_9X5 (0xf << 16) -#define AT91_ADC_STARTUP_(x) ((x) << 16) -#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ -#define AT91_ADC_SHTIM_(x) ((x) << 24) - -#define AT91_ADC_CHER 0x10 /* Channel Enable Register */ -#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */ -#define AT91_ADC_CHSR 0x18 /* Channel Status Register */ -#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */ - -#define AT91_ADC_SR 0x1C /* Status Register */ -#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */ -#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */ -#define AT91_ADC_DRDY (1 << 16) /* Data Ready */ -#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */ -#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */ -#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */ - -#define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */ -#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */ - -#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */ -#define AT91_ADC_LDATA (0x3ff) - -#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */ -#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */ -#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */ -#define AT91_ADC_IER_PEN (1 << 29) -#define AT91_ADC_IER_NOPEN (1 << 30) -#define AT91_ADC_IER_XRDY (1 << 20) -#define AT91_ADC_IER_YRDY (1 << 21) -#define AT91_ADC_IER_PRDY (1 << 22) -#define AT91_ADC_ISR_PENS (1 << 31) - -#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */ -#define AT91_ADC_DATA (0x3ff) - -#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */ - -#define AT91_ADC_ACR 0x94 /* Analog Control Register */ -#define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up resistor */ - -#define AT91_ADC_TSMR 0xB0 -#define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode */ -#define AT91_ADC_TSMR_TSMODE_NONE (0 << 0) -#define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0) -#define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0) -#define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0) -#define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */ -#define AT91_ADC_TSMR_TSAV_(x) ((x) << 4) -#define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch closure time */ -#define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen Debounce time */ -#define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28) -#define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA */ -#define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen contact detection disable */ -#define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen contact detection enable */ - -#define AT91_ADC_TSXPOSR 0xB4 -#define AT91_ADC_TSYPOSR 0xB8 -#define AT91_ADC_TSPRESSR 0xBC - -#define AT91_ADC_TRGR_9260 AT91_ADC_MR -#define AT91_ADC_TRGR_9G45 0x08 -#define AT91_ADC_TRGR_9X5 0xC0 - -/* Trigger Register bit field */ -#define AT91_ADC_TRGR_TRGPER (0xffff << 16) -#define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16) -#define AT91_ADC_TRGR_TRGMOD (0x7 << 0) -#define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0) - -#endif diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index f17aa3150019..56338245653a 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -104,5 +104,20 @@ /* Clocks */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ +/* + * FIXME: this is needed to communicate between the pinctrl driver and + * the PM implementation in the machine. Possibly part of the PM + * implementation should be moved down into the pinctrl driver and get + * called as part of the generic suspend/resume path. + */ +#ifndef __ASSEMBLY__ +#ifdef CONFIG_PINCTRL_AT91 +extern void at91_pinctrl_gpio_suspend(void); +extern void at91_pinctrl_gpio_resume(void); +#else +static inline void at91_pinctrl_gpio_suspend(void) {} +static inline void at91_pinctrl_gpio_resume(void) {} +#endif +#endif #endif diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 3e22978b5547..77c4d8fd03fd 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include "board.h" +#include "gpio.h" /* ------------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 8bda1cefdf96..e95554532987 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -32,6 +32,7 @@ #include "at91_aic.h" #include "generic.h" #include "pm.h" +#include "gpio.h" /* * Show the reason for the previous system reset. diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 49c914cd9c7a..9f19636fea2f 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -11,7 +11,6 @@ menu "Broadcom SoC Selection" config ARCH_BCM_MOBILE bool "Broadcom Mobile SoC" if ARCH_MULTI_V7 - depends on MMU select ARCH_REQUIRE_GPIOLIB select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP @@ -33,10 +32,7 @@ config ARCH_BCM2835 select ARM_AMBA select ARM_ERRATA_411920 select ARM_TIMER_SP804 - select CLKDEV_LOOKUP select CLKSRC_OF - select CPU_V6 - select GENERIC_CLOCKEVENTS select PINCTRL select PINCTRL_BCM2835 help @@ -45,14 +41,10 @@ config ARCH_BCM2835 config ARCH_BCM_5301X bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7 - depends on MMU select ARM_GIC select CACHE_L2X0 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP - select COMMON_CLK - select GENERIC_CLOCKEVENTS select ARM_GLOBAL_TIMER select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK select MIGHT_HAVE_PCI diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index bc4344aa1009..4a5a7aedcb76 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -108,6 +108,38 @@ static int __initdata gpio2_irqs[4] = { 0, }; +#ifdef CONFIG_MULTI_IRQ_HANDLER +/* + * Compiling with both non-DT and DT support enabled, will + * break asm irq handler used by non-DT boards. Therefore, + * we provide a C-style irq handler even for non-DT boards, + * if MULTI_IRQ_HANDLER is set. + */ + +static void __iomem *dove_irq_base = IRQ_VIRT_BASE; + +static asmlinkage void +__exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs) +{ + u32 stat; + + stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_LOW_OFF); + stat &= readl_relaxed(dove_irq_base + IRQ_MASK_LOW_OFF); + if (stat) { + unsigned int hwirq = __fls(stat); + handle_IRQ(hwirq, regs); + return; + } + stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_HIGH_OFF); + stat &= readl_relaxed(dove_irq_base + IRQ_MASK_HIGH_OFF); + if (stat) { + unsigned int hwirq = 32 + __fls(stat); + handle_IRQ(hwirq, regs); + return; + } +} +#endif + void __init dove_init_irq(void) { int i; @@ -115,6 +147,10 @@ void __init dove_init_irq(void) orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); +#ifdef CONFIG_MULTI_IRQ_HANDLER + set_handle_irq(dove_legacy_handle_irq); +#endif + /* * Initialize gpiolib for GPIOs 0-71. */ diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index b0e7f9d2c245..2b4d6acfa34a 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -208,8 +208,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) * the "output_enable" bit as a gate, even though it's really just * enabling clock output. */ - clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10); - clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11); + clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10); + clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11); /* name parent_name reg idx */ clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); @@ -258,14 +258,14 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[ipu2_sel] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT); clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT); - clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); - clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); - clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); - clk[ipu2_di1_pre_sel] = imx_clk_mux("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); - clk[ipu1_di0_sel] = imx_clk_mux("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels)); - clk[ipu1_di1_sel] = imx_clk_mux("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels)); - clk[ipu2_di0_sel] = imx_clk_mux("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels)); - clk[ipu2_di1_sel] = imx_clk_mux("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels)); + clk[ipu1_di0_pre_sel] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); + clk[ipu1_di1_pre_sel] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); + clk[ipu2_di0_pre_sel] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); + clk[ipu2_di1_pre_sel] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); + clk[ipu1_di0_sel] = imx_clk_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT); + clk[ipu1_di1_sel] = imx_clk_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT); + clk[ipu2_di0_sel] = imx_clk_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT); + clk[ipu2_di1_sel] = imx_clk_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT); clk[hsi_tx_sel] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels)); clk[pcie_axi_sel] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels)); clk[ssi1_sel] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); @@ -445,6 +445,15 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]); } + clk_set_parent(clk[ipu1_di0_pre_sel], clk[pll5_video_div]); + clk_set_parent(clk[ipu1_di1_pre_sel], clk[pll5_video_div]); + clk_set_parent(clk[ipu2_di0_pre_sel], clk[pll5_video_div]); + clk_set_parent(clk[ipu2_di1_pre_sel], clk[pll5_video_div]); + clk_set_parent(clk[ipu1_di0_sel], clk[ipu1_di0_pre]); + clk_set_parent(clk[ipu1_di1_sel], clk[ipu1_di1_pre]); + clk_set_parent(clk[ipu2_di0_sel], clk[ipu2_di0_pre]); + clk_set_parent(clk[ipu2_di1_sel], clk[ipu2_di1_pre]); + /* * The gpmi needs 100MHz frequency in the EDO/Sync mode, * We can not get the 100MHz from the pll2_pfd0_352m. diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 2801da49e2a3..ff18ff20f71f 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -195,7 +195,7 @@ static void __init kirkwood_dt_init(void) { kirkwood_disable_mbus_error_propagation(); - BUG_ON(mvebu_mbus_dt_init()); + BUG_ON(mvebu_mbus_dt_init(false)); #ifdef CONFIG_CACHE_FEROCEON_L2 feroceon_of_init(); diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 2a97a2e4163c..2c47a8ad0e27 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -7,6 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ +#include <asm/exception.h> #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/irq.h> @@ -30,11 +31,47 @@ static int __initdata gpio1_irqs[4] = { 0, }; +#ifdef CONFIG_MULTI_IRQ_HANDLER +/* + * Compiling with both non-DT and DT support enabled, will + * break asm irq handler used by non-DT boards. Therefore, + * we provide a C-style irq handler even for non-DT boards, + * if MULTI_IRQ_HANDLER is set. + */ + +static void __iomem *kirkwood_irq_base = IRQ_VIRT_BASE; + +asmlinkage void +__exception_irq_entry kirkwood_legacy_handle_irq(struct pt_regs *regs) +{ + u32 stat; + + stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_LOW_OFF); + stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_LOW_OFF); + if (stat) { + unsigned int hwirq = __fls(stat); + handle_IRQ(hwirq, regs); + return; + } + stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_HIGH_OFF); + stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_HIGH_OFF); + if (stat) { + unsigned int hwirq = 32 + __fls(stat); + handle_IRQ(hwirq, regs); + return; + } +} +#endif + void __init kirkwood_init_irq(void) { orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); +#ifdef CONFIG_MULTI_IRQ_HANDLER + set_handle_irq(kirkwood_legacy_handle_irq); +#endif + /* * Initialize gpiolib for GPIOs 0-49. */ diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 3f73eecbcfb0..199187e474ce 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -3,15 +3,14 @@ config ARCH_MVEBU select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO select GENERIC_IRQ_CHIP - select IRQ_DOMAIN select PINCTRL select PLAT_ORION + select SOC_BUS select MVEBU_MBUS select ZONE_DMA if ARM_LPAE select ARCH_REQUIRE_GPIOLIB select MIGHT_HAVE_PCI select PCI_QUIRKS if PCI - select OF_ADDRESS_PCI if ARCH_MVEBU @@ -38,7 +37,9 @@ config MACH_ARMADA_375 select ARM_ERRATA_753970 select ARM_GIC select ARMADA_375_CLK - select CPU_V7 + select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP + select HAVE_SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_375 help @@ -51,7 +52,9 @@ config MACH_ARMADA_38X select ARM_ERRATA_753970 select ARM_GIC select ARMADA_38X_CLK - select CPU_V7 + select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP + select HAVE_SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_38X help @@ -86,24 +89,15 @@ config MACH_KIRKWOOD select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select KIRKWOOD_CLK - select OF_IRQ select ORION_IRQCHIP select ORION_TIMER select PCI select PCI_QUIRKS select PINCTRL_KIRKWOOD - select USE_OF help Say 'Y' here if you want your kernel to support boards based on the Marvell Kirkwood device tree. -config MACH_T5325 - bool "HP T5325 thin client" - depends on MACH_KIRKWOOD - help - Say 'Y' here if you want your kernel to support the - HP T5325 Thin client - endmenu endif diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index a63e43b6b451..2ecb828e4a8b 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -2,12 +2,15 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-orion/include AFLAGS_coherency_ll.o := -Wa,-march=armv7-a +CFLAGS_pmsu.o := -march=armv7-a obj-y += system-controller.o mvebu-soc-id.o -obj-$(CONFIG_MACH_MVEBU_V7) += board-v7.o + +ifeq ($(CONFIG_MACH_MVEBU_V7),y) +obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +endif + obj-$(CONFIG_MACH_DOVE) += dove.o -obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o -obj-$(CONFIG_MACH_T5325) += board-t5325.o diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h index 237c86b83390..c3465f5b1250 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.h +++ b/arch/arm/mach-mvebu/armada-370-xp.h @@ -20,8 +20,6 @@ #define ARMADA_XP_MAX_CPUS 4 -void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq); -void armada_xp_mpic_smp_cpu_init(void); void armada_xp_secondary_startup(void); extern struct smp_operations armada_xp_smp_ops; #endif diff --git a/arch/arm/mach-mvebu/board-t5325.c b/arch/arm/mach-mvebu/board-t5325.c deleted file mode 100644 index 65ace6db9f28..000000000000 --- a/arch/arm/mach-mvebu/board-t5325.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * HP T5325 Board Setup - * - * Copyright (C) 2014 - * - * Andrew Lunn <andrew@lunn.ch> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/i2c.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <sound/alc5623.h> -#include "board.h" - -static struct platform_device hp_t5325_audio_device = { - .name = "t5325-audio", - .id = -1, -}; - -static struct alc5623_platform_data alc5621_data = { - .add_ctrl = 0x3700, - .jack_det_ctrl = 0x4810, -}; - -static struct i2c_board_info i2c_board_info[] __initdata = { - { - I2C_BOARD_INFO("alc5621", 0x1a), - .platform_data = &alc5621_data, - }, -}; - -void __init t5325_init(void) -{ - i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); - platform_device_register(&hp_t5325_audio_device); -} diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 333fca8fdc41..01cfce6ac20b 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -27,12 +27,30 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> +#include <asm/smp_scu.h> #include "armada-370-xp.h" #include "common.h" #include "coherency.h" #include "mvebu-soc-id.h" /* + * Enables the SCU when available. Obviously, this is only useful on + * Cortex-A based SOCs, not on PJ4B based ones. + */ +static void __init mvebu_scu_enable(void) +{ + void __iomem *scu_base; + + struct device_node *np = + of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); + if (np) { + scu_base = of_iomap(np, 0); + scu_enable(scu_base); + of_node_put(np); + } +} + +/* * Early versions of Armada 375 SoC have a bug where the BootROM * leaves an external data abort pending. The kernel is hit by this * data abort as soon as it enters userspace, because it unmasks the @@ -57,11 +75,10 @@ static void __init mvebu_timer_and_clk_init(void) { of_clk_init(NULL); clocksource_of_init(); + mvebu_scu_enable(); coherency_init(); - BUG_ON(mvebu_mbus_dt_init()); -#ifdef CONFIG_CACHE_L2X0 + BUG_ON(mvebu_mbus_dt_init(coherency_available())); l2x0_of_init(0, ~0UL); -#endif if (of_machine_is_compatible("marvell,armada375")) hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0, @@ -78,7 +95,7 @@ static void __init i2c_quirk(void) * mechanism. We can exit only if we are sure that we can * get the SoC revision and it is more recent than A0. */ - if (mvebu_get_soc_id(&rev, &dev) == 0 && dev > MV78XX0_A0_REV) + if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > MV78XX0_A0_REV) return; for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") { @@ -96,10 +113,66 @@ static void __init i2c_quirk(void) return; } +#define A375_Z1_THERMAL_FIXUP_OFFSET 0xc + +static void __init thermal_quirk(void) +{ + struct device_node *np; + u32 dev, rev; + + if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV) + return; + + for_each_compatible_node(np, NULL, "marvell,armada375-thermal") { + struct property *prop; + __be32 newval, *newprop, *oldprop; + int len; + + /* + * The register offset is at a wrong location. This quirk + * creates a new reg property as a clone of the previous + * one and corrects the offset. + */ + oldprop = (__be32 *)of_get_property(np, "reg", &len); + if (!oldprop) + continue; + + /* Create a duplicate of the 'reg' property */ + prop = kzalloc(sizeof(*prop), GFP_KERNEL); + prop->length = len; + prop->name = kstrdup("reg", GFP_KERNEL); + prop->value = kzalloc(len, GFP_KERNEL); + memcpy(prop->value, oldprop, len); + + /* Fixup the register offset of the second entry */ + oldprop += 2; + newprop = (__be32 *)prop->value + 2; + newval = cpu_to_be32(be32_to_cpu(*oldprop) - + A375_Z1_THERMAL_FIXUP_OFFSET); + *newprop = newval; + of_update_property(np, prop); + + /* + * The thermal controller needs some quirk too, so let's change + * the compatible string to reflect this. + */ + prop = kzalloc(sizeof(*prop), GFP_KERNEL); + prop->name = kstrdup("compatible", GFP_KERNEL); + prop->length = sizeof("marvell,armada375-z1-thermal"); + prop->value = kstrdup("marvell,armada375-z1-thermal", + GFP_KERNEL); + of_update_property(np, prop); + } + return; +} + static void __init mvebu_dt_init(void) { if (of_machine_is_compatible("plathome,openblocks-ax3-4")) i2c_quirk(); + if (of_machine_is_compatible("marvell,a375-db")) + thermal_quirk(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -123,6 +196,7 @@ static const char * const armada_375_dt_compat[] = { DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)") .init_time = mvebu_timer_and_clk_init, + .init_machine = mvebu_dt_init, .restart = mvebu_restart, .dt_compat = armada_375_dt_compat, MACHINE_END diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h index de7f0a191394..9c7bb4386f8b 100644 --- a/arch/arm/mach-mvebu/board.h +++ b/arch/arm/mach-mvebu/board.h @@ -13,10 +13,4 @@ #ifndef __ARCH_MVEBU_BOARD_H #define __ARCH_MVEBU_BOARD_H -#ifdef CONFIG_MACH_T5325 -void t5325_init(void); -#else -static inline void t5325_init(void) {}; -#endif - #endif diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index 4e9d58148ca7..d5a975b6a590 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -17,6 +17,8 @@ * supplies basic routines for configuring and controlling hardware coherency */ +#define pr_fmt(fmt) "mvebu-coherency: " fmt + #include <linux/kernel.h> #include <linux/init.h> #include <linux/of_address.h> @@ -24,13 +26,17 @@ #include <linux/smp.h> #include <linux/dma-mapping.h> #include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/mbus.h> +#include <linux/clk.h> #include <asm/smp_plat.h> #include <asm/cacheflush.h> #include "armada-370-xp.h" #include "coherency.h" +#include "mvebu-soc-id.h" unsigned long coherency_phys_base; -static void __iomem *coherency_base; +void __iomem *coherency_base; static void __iomem *coherency_cpu_base; /* Coherency fabric registers */ @@ -38,27 +44,190 @@ static void __iomem *coherency_cpu_base; #define IO_SYNC_BARRIER_CTL_OFFSET 0x0 +enum { + COHERENCY_FABRIC_TYPE_NONE, + COHERENCY_FABRIC_TYPE_ARMADA_370_XP, + COHERENCY_FABRIC_TYPE_ARMADA_375, + COHERENCY_FABRIC_TYPE_ARMADA_380, +}; + static struct of_device_id of_coherency_table[] = { - {.compatible = "marvell,coherency-fabric"}, + {.compatible = "marvell,coherency-fabric", + .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_370_XP }, + {.compatible = "marvell,armada-375-coherency-fabric", + .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_375 }, + {.compatible = "marvell,armada-380-coherency-fabric", + .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_380 }, { /* end of list */ }, }; -/* Function defined in coherency_ll.S */ -int ll_set_cpu_coherent(void __iomem *base_addr, unsigned int hw_cpu_id); +/* Functions defined in coherency_ll.S */ +int ll_enable_coherency(void); +void ll_add_cpu_to_smp_group(void); -int set_cpu_coherent(unsigned int hw_cpu_id, int smp_group_id) +int set_cpu_coherent(void) { if (!coherency_base) { - pr_warn("Can't make CPU %d cache coherent.\n", hw_cpu_id); + pr_warn("Can't make current CPU cache coherent.\n"); pr_warn("Coherency fabric is not initialized\n"); return 1; } - return ll_set_cpu_coherent(coherency_base, hw_cpu_id); + ll_add_cpu_to_smp_group(); + return ll_enable_coherency(); +} + +/* + * The below code implements the I/O coherency workaround on Armada + * 375. This workaround consists in using the two channels of the + * first XOR engine to trigger a XOR transaction that serves as the + * I/O coherency barrier. + */ + +static void __iomem *xor_base, *xor_high_base; +static dma_addr_t coherency_wa_buf_phys[CONFIG_NR_CPUS]; +static void *coherency_wa_buf[CONFIG_NR_CPUS]; +static bool coherency_wa_enabled; + +#define XOR_CONFIG(chan) (0x10 + (chan * 4)) +#define XOR_ACTIVATION(chan) (0x20 + (chan * 4)) +#define WINDOW_BAR_ENABLE(chan) (0x240 + ((chan) << 2)) +#define WINDOW_BASE(w) (0x250 + ((w) << 2)) +#define WINDOW_SIZE(w) (0x270 + ((w) << 2)) +#define WINDOW_REMAP_HIGH(w) (0x290 + ((w) << 2)) +#define WINDOW_OVERRIDE_CTRL(chan) (0x2A0 + ((chan) << 2)) +#define XOR_DEST_POINTER(chan) (0x2B0 + (chan * 4)) +#define XOR_BLOCK_SIZE(chan) (0x2C0 + (chan * 4)) +#define XOR_INIT_VALUE_LOW 0x2E0 +#define XOR_INIT_VALUE_HIGH 0x2E4 + +static inline void mvebu_hwcc_armada375_sync_io_barrier_wa(void) +{ + int idx = smp_processor_id(); + + /* Write '1' to the first word of the buffer */ + writel(0x1, coherency_wa_buf[idx]); + + /* Wait until the engine is idle */ + while ((readl(xor_base + XOR_ACTIVATION(idx)) >> 4) & 0x3) + ; + + dmb(); + + /* Trigger channel */ + writel(0x1, xor_base + XOR_ACTIVATION(idx)); + + /* Poll the data until it is cleared by the XOR transaction */ + while (readl(coherency_wa_buf[idx])) + ; +} + +static void __init armada_375_coherency_init_wa(void) +{ + const struct mbus_dram_target_info *dram; + struct device_node *xor_node; + struct property *xor_status; + struct clk *xor_clk; + u32 win_enable = 0; + int i; + + pr_warn("enabling coherency workaround for Armada 375 Z1, one XOR engine disabled\n"); + + /* + * Since the workaround uses one XOR engine, we grab a + * reference to its Device Tree node first. + */ + xor_node = of_find_compatible_node(NULL, NULL, "marvell,orion-xor"); + BUG_ON(!xor_node); + + /* + * Then we mark it as disabled so that the real XOR driver + * will not use it. + */ + xor_status = kzalloc(sizeof(struct property), GFP_KERNEL); + BUG_ON(!xor_status); + + xor_status->value = kstrdup("disabled", GFP_KERNEL); + BUG_ON(!xor_status->value); + + xor_status->length = 8; + xor_status->name = kstrdup("status", GFP_KERNEL); + BUG_ON(!xor_status->name); + + of_update_property(xor_node, xor_status); + + /* + * And we remap the registers, get the clock, and do the + * initial configuration of the XOR engine. + */ + xor_base = of_iomap(xor_node, 0); + xor_high_base = of_iomap(xor_node, 1); + + xor_clk = of_clk_get_by_name(xor_node, NULL); + BUG_ON(!xor_clk); + + clk_prepare_enable(xor_clk); + + dram = mv_mbus_dram_info(); + + for (i = 0; i < 8; i++) { + writel(0, xor_base + WINDOW_BASE(i)); + writel(0, xor_base + WINDOW_SIZE(i)); + if (i < 4) + writel(0, xor_base + WINDOW_REMAP_HIGH(i)); + } + + for (i = 0; i < dram->num_cs; i++) { + const struct mbus_dram_window *cs = dram->cs + i; + writel((cs->base & 0xffff0000) | + (cs->mbus_attr << 8) | + dram->mbus_dram_target_id, xor_base + WINDOW_BASE(i)); + writel((cs->size - 1) & 0xffff0000, xor_base + WINDOW_SIZE(i)); + + win_enable |= (1 << i); + win_enable |= 3 << (16 + (2 * i)); + } + + writel(win_enable, xor_base + WINDOW_BAR_ENABLE(0)); + writel(win_enable, xor_base + WINDOW_BAR_ENABLE(1)); + writel(0, xor_base + WINDOW_OVERRIDE_CTRL(0)); + writel(0, xor_base + WINDOW_OVERRIDE_CTRL(1)); + + for (i = 0; i < CONFIG_NR_CPUS; i++) { + coherency_wa_buf[i] = kzalloc(PAGE_SIZE, GFP_KERNEL); + BUG_ON(!coherency_wa_buf[i]); + + /* + * We can't use the DMA mapping API, since we don't + * have a valid 'struct device' pointer + */ + coherency_wa_buf_phys[i] = + virt_to_phys(coherency_wa_buf[i]); + BUG_ON(!coherency_wa_buf_phys[i]); + + /* + * Configure the XOR engine for memset operation, with + * a 128 bytes block size + */ + writel(0x444, xor_base + XOR_CONFIG(i)); + writel(128, xor_base + XOR_BLOCK_SIZE(i)); + writel(coherency_wa_buf_phys[i], + xor_base + XOR_DEST_POINTER(i)); + } + + writel(0x0, xor_base + XOR_INIT_VALUE_LOW); + writel(0x0, xor_base + XOR_INIT_VALUE_HIGH); + + coherency_wa_enabled = true; } static inline void mvebu_hwcc_sync_io_barrier(void) { + if (coherency_wa_enabled) { + mvebu_hwcc_armada375_sync_io_barrier_wa(); + return; + } + writel(0x1, coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET); while (readl(coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET) & 0x1); } @@ -121,42 +290,93 @@ static struct notifier_block mvebu_hwcc_platform_nb = { .notifier_call = mvebu_hwcc_platform_notifier, }; -int __init coherency_init(void) +static void __init armada_370_coherency_init(struct device_node *np) +{ + struct resource res; + + of_address_to_resource(np, 0, &res); + coherency_phys_base = res.start; + /* + * Ensure secondary CPUs will see the updated value, + * which they read before they join the coherency + * fabric, and therefore before they are coherent with + * the boot CPU cache. + */ + sync_cache_w(&coherency_phys_base); + coherency_base = of_iomap(np, 0); + coherency_cpu_base = of_iomap(np, 1); + set_cpu_coherent(); +} + +static void __init armada_375_380_coherency_init(struct device_node *np) +{ + coherency_cpu_base = of_iomap(np, 0); +} + +static int coherency_type(void) { struct device_node *np; + const struct of_device_id *match; - np = of_find_matching_node(NULL, of_coherency_table); + np = of_find_matching_node_and_match(NULL, of_coherency_table, &match); if (np) { - struct resource res; - pr_info("Initializing Coherency fabric\n"); - of_address_to_resource(np, 0, &res); - coherency_phys_base = res.start; - /* - * Ensure secondary CPUs will see the updated value, - * which they read before they join the coherency - * fabric, and therefore before they are coherent with - * the boot CPU cache. - */ - sync_cache_w(&coherency_phys_base); - coherency_base = of_iomap(np, 0); - coherency_cpu_base = of_iomap(np, 1); - set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); - of_node_put(np); + int type = (int) match->data; + + /* Armada 370/XP coherency works in both UP and SMP */ + if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP) + return type; + + /* Armada 375 coherency works only on SMP */ + else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 && is_smp()) + return type; + + /* Armada 380 coherency works only on SMP */ + else if (type == COHERENCY_FABRIC_TYPE_ARMADA_380 && is_smp()) + return type; } - return 0; + return COHERENCY_FABRIC_TYPE_NONE; } -static int __init coherency_late_init(void) +int coherency_available(void) +{ + return coherency_type() != COHERENCY_FABRIC_TYPE_NONE; +} + +int __init coherency_init(void) { + int type = coherency_type(); struct device_node *np; np = of_find_matching_node(NULL, of_coherency_table); - if (np) { - bus_register_notifier(&platform_bus_type, - &mvebu_hwcc_platform_nb); - of_node_put(np); + + if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP) + armada_370_coherency_init(np); + else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 || + type == COHERENCY_FABRIC_TYPE_ARMADA_380) + armada_375_380_coherency_init(np); + + return 0; +} + +static int __init coherency_late_init(void) +{ + int type = coherency_type(); + + if (type == COHERENCY_FABRIC_TYPE_NONE) + return 0; + + if (type == COHERENCY_FABRIC_TYPE_ARMADA_375) { + u32 dev, rev; + + if (mvebu_get_soc_id(&dev, &rev) == 0 && + rev == ARMADA_375_Z1_REV) + armada_375_coherency_init_wa(); } + + bus_register_notifier(&platform_bus_type, + &mvebu_hwcc_platform_nb); + return 0; } diff --git a/arch/arm/mach-mvebu/coherency.h b/arch/arm/mach-mvebu/coherency.h index 760226c41353..54cb7607b526 100644 --- a/arch/arm/mach-mvebu/coherency.h +++ b/arch/arm/mach-mvebu/coherency.h @@ -15,8 +15,9 @@ #define __MACH_370_XP_COHERENCY_H extern unsigned long coherency_phys_base; +int set_cpu_coherent(void); -int set_cpu_coherent(unsigned int cpu_id, int smp_group_id); int coherency_init(void); +int coherency_available(void); #endif /* __MACH_370_XP_COHERENCY_H */ diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S index ee7598fe75db..6828f9f157b0 100644 --- a/arch/arm/mach-mvebu/coherency_ll.S +++ b/arch/arm/mach-mvebu/coherency_ll.S @@ -21,38 +21,108 @@ #define ARMADA_XP_CFB_CFG_REG_OFFSET 0x4 #include <asm/assembler.h> +#include <asm/cp15.h> .text -/* - * r0: Coherency fabric base register address - * r1: HW CPU id - */ -ENTRY(ll_set_cpu_coherent) - /* Create bit by cpu index */ - mov r3, #(1 << 24) - lsl r1, r3, r1 -ARM_BE8(rev r1, r1) +/* Returns with the coherency address in r1 (r0 is untouched)*/ +ENTRY(ll_get_coherency_base) + mrc p15, 0, r1, c1, c0, 0 + tst r1, #CR_M @ Check MMU bit enabled + bne 1f - /* Add CPU to SMP group - Atomic */ - add r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET + /* use physical address of the coherency register */ + adr r1, 3f + ldr r3, [r1] + ldr r1, [r1, r3] + b 2f 1: - ldrex r2, [r3] - orr r2, r2, r1 - strex r0, r2, [r3] - cmp r0, #0 - bne 1b - - /* Enable coherency on CPU - Atomic */ - add r3, r3, #ARMADA_XP_CFB_CFG_REG_OFFSET + /* use virtual address of the coherency register */ + ldr r1, =coherency_base + ldr r1, [r1] +2: + mov pc, lr +ENDPROC(ll_get_coherency_base) + +/* Returns with the CPU ID in r3 (r0 is untouched)*/ +ENTRY(ll_get_cpuid) + mrc 15, 0, r3, cr0, cr0, 5 + and r3, r3, #15 + mov r2, #(1 << 24) + lsl r3, r2, r3 +ARM_BE8(rev r1, r1) + mov pc, lr +ENDPROC(ll_get_cpuid) + +/* ll_add_cpu_to_smp_group, ll_enable_coherency and + * ll_disable_coherency use strex/ldrex whereas MMU can be off. The + * Armada XP SoC has an exclusive monitor that can track transactions + * to Device and/or SO and as such also when MMU is disabled the + * exclusive transactions will be functional + */ + +ENTRY(ll_add_cpu_to_smp_group) + /* + * r0 being untouched in ll_get_coherency_base and + * ll_get_cpuid, we can use it to save lr modifing it with the + * following bl + */ + mov r0, lr + bl ll_get_coherency_base + bl ll_get_cpuid + mov lr, r0 + add r0, r1, #ARMADA_XP_CFB_CFG_REG_OFFSET 1: - ldrex r2, [r3] - orr r2, r2, r1 - strex r0, r2, [r3] - cmp r0, #0 - bne 1b + ldrex r2, [r0] + orr r2, r2, r3 + strex r1, r2, [r0] + cmp r1, #0 + bne 1b + mov pc, lr +ENDPROC(ll_add_cpu_to_smp_group) +ENTRY(ll_enable_coherency) + /* + * r0 being untouched in ll_get_coherency_base and + * ll_get_cpuid, we can use it to save lr modifing it with the + * following bl + */ + mov r0, lr + bl ll_get_coherency_base + bl ll_get_cpuid + mov lr, r0 + add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET +1: + ldrex r2, [r0] + orr r2, r2, r3 + strex r1, r2, [r0] + cmp r1, #0 + bne 1b dsb - mov r0, #0 mov pc, lr -ENDPROC(ll_set_cpu_coherent) +ENDPROC(ll_enable_coherency) + +ENTRY(ll_disable_coherency) + /* + * r0 being untouched in ll_get_coherency_base and + * ll_get_cpuid, we can use it to save lr modifing it with the + * following bl + */ + mov r0, lr + bl ll_get_coherency_base + bl ll_get_cpuid + mov lr, r0 + add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET +1: + ldrex r2, [r0] + bic r2, r2, r3 + strex r1, r2, [r0] + cmp r1, #0 + bne 1b + dsb + mov pc, lr +ENDPROC(ll_disable_coherency) + + .align 2 +3: + .long coherency_phys_base - . diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h index 55449c487c9e..b67fb7a10d8b 100644 --- a/arch/arm/mach-mvebu/common.h +++ b/arch/arm/mach-mvebu/common.h @@ -18,6 +18,9 @@ #include <linux/reboot.h> void mvebu_restart(enum reboot_mode mode, const char *cmd); +int mvebu_cpu_reset_deassert(int cpu); +void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr); +void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr); void armada_xp_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-mvebu/cpu-reset.c b/arch/arm/mach-mvebu/cpu-reset.c new file mode 100644 index 000000000000..4a8f9eebebea --- /dev/null +++ b/arch/arm/mach-mvebu/cpu-reset.c @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2014 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) "mvebu-cpureset: " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of_address.h> +#include <linux/io.h> +#include <linux/resource.h> +#include "armada-370-xp.h" + +static void __iomem *cpu_reset_base; +static size_t cpu_reset_size; + +#define CPU_RESET_OFFSET(cpu) (cpu * 0x8) +#define CPU_RESET_ASSERT BIT(0) + +int mvebu_cpu_reset_deassert(int cpu) +{ + u32 reg; + + if (!cpu_reset_base) + return -ENODEV; + + if (CPU_RESET_OFFSET(cpu) >= cpu_reset_size) + return -EINVAL; + + reg = readl(cpu_reset_base + CPU_RESET_OFFSET(cpu)); + reg &= ~CPU_RESET_ASSERT; + writel(reg, cpu_reset_base + CPU_RESET_OFFSET(cpu)); + + return 0; +} + +static int mvebu_cpu_reset_map(struct device_node *np, int res_idx) +{ + struct resource res; + + if (of_address_to_resource(np, res_idx, &res)) { + pr_err("unable to get resource\n"); + return -ENOENT; + } + + if (!request_mem_region(res.start, resource_size(&res), + np->full_name)) { + pr_err("unable to request region\n"); + return -EBUSY; + } + + cpu_reset_base = ioremap(res.start, resource_size(&res)); + if (!cpu_reset_base) { + pr_err("unable to map registers\n"); + release_mem_region(res.start, resource_size(&res)); + return -ENOMEM; + } + + cpu_reset_size = resource_size(&res); + + return 0; +} + +int __init mvebu_cpu_reset_init(void) +{ + struct device_node *np; + int res_idx; + int ret; + + np = of_find_compatible_node(NULL, NULL, + "marvell,armada-370-cpu-reset"); + if (np) { + res_idx = 0; + } else { + /* + * This code is kept for backward compatibility with + * old Device Trees. + */ + np = of_find_compatible_node(NULL, NULL, + "marvell,armada-370-xp-pmsu"); + if (np) { + pr_warn(FW_WARN "deprecated pmsu binding\n"); + res_idx = 1; + } + } + + /* No reset node found */ + if (!np) + return -ENODEV; + + ret = mvebu_cpu_reset_map(np, res_idx); + of_node_put(np); + + return ret; +} + +early_initcall(mvebu_cpu_reset_init); diff --git a/arch/arm/mach-mvebu/dove.c b/arch/arm/mach-mvebu/dove.c index 5e5a43624237..b50464ec1130 100644 --- a/arch/arm/mach-mvebu/dove.c +++ b/arch/arm/mach-mvebu/dove.c @@ -23,7 +23,7 @@ static void __init dove_init(void) #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); #endif - BUG_ON(mvebu_mbus_dt_init()); + BUG_ON(mvebu_mbus_dt_init(false)); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S new file mode 100644 index 000000000000..5925366bc03c --- /dev/null +++ b/arch/arm/mach-mvebu/headsmp-a9.S @@ -0,0 +1,34 @@ +/* + * SMP support: Entry point for secondary CPUs of Marvell EBU + * Cortex-A9 based SOCs (Armada 375 and Armada 38x). + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/linkage.h> +#include <linux/init.h> + + __CPUINIT +#define CPU_RESUME_ADDR_REG 0xf10182d4 + +.global armada_375_smp_cpu1_enable_code_start +.global armada_375_smp_cpu1_enable_code_end + +armada_375_smp_cpu1_enable_code_start: + ldr r0, [pc, #4] + ldr r1, [r0] + mov pc, r1 + .word CPU_RESUME_ADDR_REG +armada_375_smp_cpu1_enable_code_end: + +ENTRY(mvebu_cortex_a9_secondary_startup) + bl v7_invalidate_l1 + b secondary_startup +ENDPROC(mvebu_cortex_a9_secondary_startup) diff --git a/arch/arm/mach-mvebu/headsmp.S b/arch/arm/mach-mvebu/headsmp.S index 3dd80df428f7..2c4032e368ba 100644 --- a/arch/arm/mach-mvebu/headsmp.S +++ b/arch/arm/mach-mvebu/headsmp.S @@ -31,21 +31,10 @@ ENTRY(armada_xp_secondary_startup) ARM_BE8(setend be ) @ go BE8 if entered LE - /* Get coherency fabric base physical address */ - adr r0, 1f - ldr r1, [r0] - ldr r0, [r0, r1] + bl ll_add_cpu_to_smp_group - /* Read CPU id */ - mrc p15, 0, r1, c0, c0, 5 - and r1, r1, #0xF + bl ll_enable_coherency - /* Add CPU to coherency fabric */ - bl ll_set_cpu_coherent b secondary_startup ENDPROC(armada_xp_secondary_startup) - - .align 2 -1: - .long coherency_phys_base - . diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c index 120207fc36f1..46f105913c84 100644 --- a/arch/arm/mach-mvebu/kirkwood.c +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -169,7 +169,7 @@ static void __init kirkwood_dt_init(void) { kirkwood_disable_mbus_error_propagation(); - BUG_ON(mvebu_mbus_dt_init()); + BUG_ON(mvebu_mbus_dt_init(false)); #ifdef CONFIG_CACHE_FEROCEON_L2 feroceon_of_init(); @@ -180,9 +180,6 @@ static void __init kirkwood_dt_init(void) kirkwood_pm_init(); kirkwood_dt_eth_fixup(); - if (of_machine_is_compatible("hp,t5325")) - t5325_init(); - of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL); } diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c index f3d4cf53f746..e9119a99a5f3 100644 --- a/arch/arm/mach-mvebu/mvebu-soc-id.c +++ b/arch/arm/mach-mvebu/mvebu-soc-id.c @@ -23,6 +23,8 @@ #include <linux/kernel.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> #include "mvebu-soc-id.h" #define PCIE_DEV_ID_OFF 0x0 @@ -116,5 +118,33 @@ clk_err: return ret; } -core_initcall(mvebu_soc_id_init); +early_initcall(mvebu_soc_id_init); +static int __init mvebu_soc_device(void) +{ + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + + /* Also protects against running on non-mvebu systems */ + if (!is_id_valid) + return 0; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return -ENOMEM; + + soc_dev_attr->family = kasprintf(GFP_KERNEL, "Marvell"); + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X", soc_rev); + soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%X", soc_dev_id); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->family); + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr->soc_id); + kfree(soc_dev_attr); + } + + return 0; +} +postcore_initcall(mvebu_soc_device); diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.h b/arch/arm/mach-mvebu/mvebu-soc-id.h index 31654252fe35..c16bb68ca81f 100644 --- a/arch/arm/mach-mvebu/mvebu-soc-id.h +++ b/arch/arm/mach-mvebu/mvebu-soc-id.h @@ -20,6 +20,10 @@ #define MV78XX0_A0_REV 0x1 #define MV78XX0_B0_REV 0x2 +/* Armada 375 */ +#define ARMADA_375_Z1_REV 0x0 +#define ARMADA_375_A0_REV 0x3 + #ifdef CONFIG_ARCH_MVEBU int mvebu_get_soc_id(u32 *dev, u32 *rev); #else diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c new file mode 100644 index 000000000000..96c2c59e34b6 --- /dev/null +++ b/arch/arm/mach-mvebu/platsmp-a9.c @@ -0,0 +1,102 @@ +/* + * Symmetric Multi Processing (SMP) support for Marvell EBU Cortex-A9 + * based SOCs (Armada 375/38x). + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/smp.h> +#include <linux/mbus.h> +#include <asm/smp_scu.h> +#include <asm/smp_plat.h> +#include "common.h" +#include "mvebu-soc-id.h" +#include "pmsu.h" + +#define CRYPT0_ENG_ID 41 +#define CRYPT0_ENG_ATTR 0x1 +#define SRAM_PHYS_BASE 0xFFFF0000 + +#define BOOTROM_BASE 0xFFF00000 +#define BOOTROM_SIZE 0x100000 + +extern unsigned char armada_375_smp_cpu1_enable_code_end; +extern unsigned char armada_375_smp_cpu1_enable_code_start; + +void armada_375_smp_cpu1_enable_wa(void) +{ + void __iomem *sram_virt_base; + + mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE); + mvebu_mbus_add_window_by_id(CRYPT0_ENG_ID, CRYPT0_ENG_ATTR, + SRAM_PHYS_BASE, SZ_64K); + sram_virt_base = ioremap(SRAM_PHYS_BASE, SZ_64K); + + memcpy(sram_virt_base, &armada_375_smp_cpu1_enable_code_start, + &armada_375_smp_cpu1_enable_code_end + - &armada_375_smp_cpu1_enable_code_start); +} + +extern void mvebu_cortex_a9_secondary_startup(void); + +static int __cpuinit mvebu_cortex_a9_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + int ret, hw_cpu; + + pr_info("Booting CPU %d\n", cpu); + + /* + * Write the address of secondary startup into the system-wide + * flags register. The boot monitor waits until it receives a + * soft interrupt, and then the secondary CPU branches to this + * address. + */ + hw_cpu = cpu_logical_map(cpu); + + if (of_machine_is_compatible("marvell,armada375")) { + u32 dev, rev; + + if (mvebu_get_soc_id(&dev, &rev) == 0 && + rev == ARMADA_375_Z1_REV) + armada_375_smp_cpu1_enable_wa(); + + mvebu_system_controller_set_cpu_boot_addr(mvebu_cortex_a9_secondary_startup); + } + else { + mvebu_pmsu_set_cpu_boot_addr(hw_cpu, + mvebu_cortex_a9_secondary_startup); + } + + smp_wmb(); + ret = mvebu_cpu_reset_deassert(hw_cpu); + if (ret) { + pr_err("Could not start the secondary CPU: %d\n", ret); + return ret; + } + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + return 0; +} + +static struct smp_operations mvebu_cortex_a9_smp_ops __initdata = { + .smp_boot_secondary = mvebu_cortex_a9_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = armada_xp_cpu_die, +#endif +}; + +CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp", + &mvebu_cortex_a9_smp_ops); +CPU_METHOD_OF_DECLARE(mvebu_armada_380_smp, "marvell,armada-380-smp", + &mvebu_cortex_a9_smp_ops); diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index a6da03f5b24e..88b976b31719 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -70,16 +70,19 @@ static void __init set_secondary_cpus_clock(void) } } -static void armada_xp_secondary_init(unsigned int cpu) -{ - armada_xp_mpic_smp_cpu_init(); -} - static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle) { + int ret, hw_cpu; + pr_info("Booting CPU %d\n", cpu); - armada_xp_boot_cpu(cpu, armada_xp_secondary_startup); + hw_cpu = cpu_logical_map(cpu); + mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup); + ret = mvebu_cpu_reset_deassert(hw_cpu); + if (ret) { + pr_warn("unable to boot CPU: %d\n", ret); + return ret; + } return 0; } @@ -90,8 +93,6 @@ static void __init armada_xp_smp_init_cpus(void) if (ncores == 0 || ncores > ARMADA_XP_MAX_CPUS) panic("Invalid number of CPUs in DT\n"); - - set_smp_cross_call(armada_mpic_send_doorbell); } static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) @@ -102,7 +103,7 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) set_secondary_cpus_clock(); flush_cache_all(); - set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); + set_cpu_coherent(); /* * In order to boot the secondary CPUs we need to ensure @@ -124,9 +125,11 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) struct smp_operations armada_xp_smp_ops __initdata = { .smp_init_cpus = armada_xp_smp_init_cpus, .smp_prepare_cpus = armada_xp_smp_prepare_cpus, - .smp_secondary_init = armada_xp_secondary_init, .smp_boot_secondary = armada_xp_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = armada_xp_cpu_die, #endif }; + +CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp", + &armada_xp_smp_ops); diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index d71ef53107c4..53a55c8520bf 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -16,62 +16,283 @@ * other SOC units */ +#define pr_fmt(fmt) "mvebu-pmsu: " fmt + +#include <linux/cpu_pm.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/of_address.h> #include <linux/io.h> +#include <linux/platform_device.h> #include <linux/smp.h> +#include <linux/resource.h> +#include <asm/cacheflush.h> +#include <asm/cp15.h> #include <asm/smp_plat.h> -#include "pmsu.h" +#include <asm/suspend.h> +#include <asm/tlbflush.h> +#include "common.h" static void __iomem *pmsu_mp_base; -static void __iomem *pmsu_reset_base; -#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x24) -#define PMSU_RESET_CTL_OFFSET(cpu) (cpu * 0x8) +#define PMSU_BASE_OFFSET 0x100 +#define PMSU_REG_SIZE 0x1000 + +/* PMSU MP registers */ +#define PMSU_CONTROL_AND_CONFIG(cpu) ((cpu * 0x100) + 0x104) +#define PMSU_CONTROL_AND_CONFIG_DFS_REQ BIT(18) +#define PMSU_CONTROL_AND_CONFIG_PWDDN_REQ BIT(16) +#define PMSU_CONTROL_AND_CONFIG_L2_PWDDN BIT(20) + +#define PMSU_CPU_POWER_DOWN_CONTROL(cpu) ((cpu * 0x100) + 0x108) + +#define PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP BIT(0) + +#define PMSU_STATUS_AND_MASK(cpu) ((cpu * 0x100) + 0x10c) +#define PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT BIT(16) +#define PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT BIT(17) +#define PMSU_STATUS_AND_MASK_IRQ_WAKEUP BIT(20) +#define PMSU_STATUS_AND_MASK_FIQ_WAKEUP BIT(21) +#define PMSU_STATUS_AND_MASK_DBG_WAKEUP BIT(22) +#define PMSU_STATUS_AND_MASK_IRQ_MASK BIT(24) +#define PMSU_STATUS_AND_MASK_FIQ_MASK BIT(25) + +#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x124) + +/* PMSU fabric registers */ +#define L2C_NFABRIC_PM_CTL 0x4 +#define L2C_NFABRIC_PM_CTL_PWR_DOWN BIT(20) + +extern void ll_disable_coherency(void); +extern void ll_enable_coherency(void); + +static struct platform_device armada_xp_cpuidle_device = { + .name = "cpuidle-armada-370-xp", +}; static struct of_device_id of_pmsu_table[] = { - {.compatible = "marvell,armada-370-xp-pmsu"}, + { .compatible = "marvell,armada-370-pmsu", }, + { .compatible = "marvell,armada-370-xp-pmsu", }, + { .compatible = "marvell,armada-380-pmsu", }, { /* end of list */ }, }; -#ifdef CONFIG_SMP -int armada_xp_boot_cpu(unsigned int cpu_id, void *boot_addr) +void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr) { - int reg, hw_cpu; + writel(virt_to_phys(boot_addr), pmsu_mp_base + + PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu)); +} + +static int __init armada_370_xp_pmsu_init(void) +{ + struct device_node *np; + struct resource res; + int ret = 0; + + np = of_find_matching_node(NULL, of_pmsu_table); + if (!np) + return 0; + + pr_info("Initializing Power Management Service Unit\n"); - if (!pmsu_mp_base || !pmsu_reset_base) { - pr_warn("Can't boot CPU. PMSU is uninitialized\n"); - return 1; + if (of_address_to_resource(np, 0, &res)) { + pr_err("unable to get resource\n"); + ret = -ENOENT; + goto out; } - hw_cpu = cpu_logical_map(cpu_id); + if (of_device_is_compatible(np, "marvell,armada-370-xp-pmsu")) { + pr_warn(FW_WARN "deprecated pmsu binding\n"); + res.start = res.start - PMSU_BASE_OFFSET; + res.end = res.start + PMSU_REG_SIZE - 1; + } - writel(virt_to_phys(boot_addr), pmsu_mp_base + - PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu)); + if (!request_mem_region(res.start, resource_size(&res), + np->full_name)) { + pr_err("unable to request region\n"); + ret = -EBUSY; + goto out; + } + + pmsu_mp_base = ioremap(res.start, resource_size(&res)); + if (!pmsu_mp_base) { + pr_err("unable to map registers\n"); + release_mem_region(res.start, resource_size(&res)); + ret = -ENOMEM; + goto out; + } + + out: + of_node_put(np); + return ret; +} + +static void armada_370_xp_pmsu_enable_l2_powerdown_onidle(void) +{ + u32 reg; + + if (pmsu_mp_base == NULL) + return; + + /* Enable L2 & Fabric powerdown in Deep-Idle mode - Fabric */ + reg = readl(pmsu_mp_base + L2C_NFABRIC_PM_CTL); + reg |= L2C_NFABRIC_PM_CTL_PWR_DOWN; + writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL); +} + +static void armada_370_xp_cpu_resume(void) +{ + asm volatile("bl ll_add_cpu_to_smp_group\n\t" + "bl ll_enable_coherency\n\t" + "b cpu_resume\n\t"); +} + +/* No locking is needed because we only access per-CPU registers */ +void armada_370_xp_pmsu_idle_prepare(bool deepidle) +{ + unsigned int hw_cpu = cpu_logical_map(smp_processor_id()); + u32 reg; + + if (pmsu_mp_base == NULL) + return; - /* Release CPU from reset by clearing reset bit*/ - reg = readl(pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu)); - reg &= (~0x1); - writel(reg, pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu)); + /* + * Adjust the PMSU configuration to wait for WFI signal, enable + * IRQ and FIQ as wakeup events, set wait for snoop queue empty + * indication and mask IRQ and FIQ from CPU + */ + reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); + reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT | + PMSU_STATUS_AND_MASK_IRQ_WAKEUP | + PMSU_STATUS_AND_MASK_FIQ_WAKEUP | + PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT | + PMSU_STATUS_AND_MASK_IRQ_MASK | + PMSU_STATUS_AND_MASK_FIQ_MASK; + writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); + + reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + /* ask HW to power down the L2 Cache if needed */ + if (deepidle) + reg |= PMSU_CONTROL_AND_CONFIG_L2_PWDDN; + + /* request power down */ + reg |= PMSU_CONTROL_AND_CONFIG_PWDDN_REQ; + writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + + /* Disable snoop disable by HW - SW is taking care of it */ + reg = readl(pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu)); + reg |= PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP; + writel(reg, pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu)); +} + +static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle) +{ + armada_370_xp_pmsu_idle_prepare(deepidle); + + v7_exit_coherency_flush(all); + + ll_disable_coherency(); + + dsb(); + + wfi(); + + /* If we are here, wfi failed. As processors run out of + * coherency for some time, tlbs might be stale, so flush them + */ + local_flush_tlb_all(); + + ll_enable_coherency(); + + /* Test the CR_C bit and set it if it was cleared */ + asm volatile( + "mrc p15, 0, %0, c1, c0, 0 \n\t" + "tst %0, #(1 << 2) \n\t" + "orreq %0, %0, #(1 << 2) \n\t" + "mcreq p15, 0, %0, c1, c0, 0 \n\t" + "isb " + : : "r" (0)); + + pr_warn("Failed to suspend the system\n"); return 0; } -#endif -static int __init armada_370_xp_pmsu_init(void) +static int armada_370_xp_cpu_suspend(unsigned long deepidle) +{ + return cpu_suspend(deepidle, do_armada_370_xp_cpu_suspend); +} + +/* No locking is needed because we only access per-CPU registers */ +static noinline void armada_370_xp_pmsu_idle_restore(void) +{ + unsigned int hw_cpu = cpu_logical_map(smp_processor_id()); + u32 reg; + + if (pmsu_mp_base == NULL) + return; + + /* cancel ask HW to power down the L2 Cache if possible */ + reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + reg &= ~PMSU_CONTROL_AND_CONFIG_L2_PWDDN; + writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + + /* cancel Enable wakeup events and mask interrupts */ + reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); + reg &= ~(PMSU_STATUS_AND_MASK_IRQ_WAKEUP | PMSU_STATUS_AND_MASK_FIQ_WAKEUP); + reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT; + reg &= ~PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT; + reg &= ~(PMSU_STATUS_AND_MASK_IRQ_MASK | PMSU_STATUS_AND_MASK_FIQ_MASK); + writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); +} + +static int armada_370_xp_cpu_pm_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + if (action == CPU_PM_ENTER) { + unsigned int hw_cpu = cpu_logical_map(smp_processor_id()); + mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_370_xp_cpu_resume); + } else if (action == CPU_PM_EXIT) { + armada_370_xp_pmsu_idle_restore(); + } + + return NOTIFY_OK; +} + +static struct notifier_block armada_370_xp_cpu_pm_notifier = { + .notifier_call = armada_370_xp_cpu_pm_notify, +}; + +int __init armada_370_xp_cpu_pm_init(void) { struct device_node *np; + /* + * Check that all the requirements are available to enable + * cpuidle. So far, it is only supported on Armada XP, cpuidle + * needs the coherency fabric and the PMSU enabled + */ + + if (!of_machine_is_compatible("marvell,armadaxp")) + return 0; + + np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"); + if (!np) + return 0; + of_node_put(np); + np = of_find_matching_node(NULL, of_pmsu_table); - if (np) { - pr_info("Initializing Power Management Service Unit\n"); - pmsu_mp_base = of_iomap(np, 0); - pmsu_reset_base = of_iomap(np, 1); - of_node_put(np); - } + if (!np) + return 0; + of_node_put(np); + + armada_370_xp_pmsu_enable_l2_powerdown_onidle(); + armada_xp_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend; + platform_device_register(&armada_xp_cpuidle_device); + cpu_pm_register_notifier(&armada_370_xp_cpu_pm_notifier); return 0; } +arch_initcall(armada_370_xp_cpu_pm_init); early_initcall(armada_370_xp_pmsu_init); diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c index 614ba6832ff3..0c5524ac75b7 100644 --- a/arch/arm/mach-mvebu/system-controller.c +++ b/arch/arm/mach-mvebu/system-controller.c @@ -37,6 +37,8 @@ struct mvebu_system_controller { u32 rstoutn_mask_reset_out_en; u32 system_soft_reset; + + u32 resume_boot_addr; }; static struct mvebu_system_controller *mvebu_sc; @@ -52,6 +54,7 @@ static const struct mvebu_system_controller armada_375_system_controller = { .system_soft_reset_offset = 0x58, .rstoutn_mask_reset_out_en = 0x1, .system_soft_reset = 0x1, + .resume_boot_addr = 0xd4, }; static const struct mvebu_system_controller orion_system_controller = { @@ -98,6 +101,16 @@ void mvebu_restart(enum reboot_mode mode, const char *cmd) ; } +#ifdef CONFIG_SMP +void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr) +{ + BUG_ON(system_controller_base == NULL); + BUG_ON(mvebu_sc->resume_boot_addr == 0); + writel(virt_to_phys(boot_addr), system_controller_base + + mvebu_sc->resume_boot_addr); +} +#endif + static int __init mvebu_system_controller_init(void) { const struct of_device_id *match; @@ -114,4 +127,4 @@ static int __init mvebu_system_controller_init(void) return 0; } -arch_initcall(mvebu_system_controller_init); +early_initcall(mvebu_system_controller_init); diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index 43a90c8d6837..9cfebc5c7455 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -48,7 +48,7 @@ static struct omap_dss_board_info rx51_dss_board_info = { static int __init rx51_video_init(void) { - if (!machine_is_nokia_rx51() && !of_machine_is_compatible("nokia,omap3-n900")) + if (!machine_is_nokia_rx51()) return 0; if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) { diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 2649ce445845..332af927f4d3 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -209,7 +209,7 @@ u8 omap2_init_dpll_parent(struct clk_hw *hw) if (v == OMAP3XXX_EN_DPLL_LPBYPASS || v == OMAP3XXX_EN_DPLL_FRBYPASS) return 1; - } else if (soc_is_am33xx() || cpu_is_omap44xx()) { + } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) { if (v == OMAP4XXX_EN_DPLL_LPBYPASS || v == OMAP4XXX_EN_DPLL_FRBYPASS || v == OMAP4XXX_EN_DPLL_MNBYPASS) @@ -255,7 +255,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk) if (v == OMAP3XXX_EN_DPLL_LPBYPASS || v == OMAP3XXX_EN_DPLL_FRBYPASS) return __clk_get_rate(dd->clk_bypass); - } else if (soc_is_am33xx() || cpu_is_omap44xx()) { + } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) { if (v == OMAP4XXX_EN_DPLL_LPBYPASS || v == OMAP4XXX_EN_DPLL_FRBYPASS || v == OMAP4XXX_EN_DPLL_MNBYPASS) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index ab43755364f5..9fe8c949305c 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -501,7 +501,7 @@ static int gpmc_cs_delete_mem(int cs) int r; spin_lock(&gpmc_mem_lock); - r = release_resource(&gpmc_cs_mem[cs]); + r = release_resource(res); res->start = 0; res->end = 0; spin_unlock(&gpmc_mem_lock); @@ -527,6 +527,14 @@ static int gpmc_cs_remap(int cs, u32 base) pr_err("%s: requested chip-select is disabled\n", __func__); return -ENODEV; } + + /* + * Make sure we ignore any device offsets from the GPMC partition + * allocated for the chip select and that the new base confirms + * to the GPMC 16MB minimum granularity. + */ + base &= ~(SZ_16M - 1); + gpmc_cs_get_memconf(cs, &old_base, &size); if (base == old_base) return 0; @@ -586,6 +594,8 @@ EXPORT_SYMBOL(gpmc_cs_request); void gpmc_cs_free(int cs) { + struct resource *res = &gpmc_cs_mem[cs]; + spin_lock(&gpmc_mem_lock); if (cs >= gpmc_cs_num || cs < 0 || !gpmc_cs_reserved(cs)) { printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs); @@ -594,7 +604,8 @@ void gpmc_cs_free(int cs) return; } gpmc_cs_disable_mem(cs); - release_resource(&gpmc_cs_mem[cs]); + if (res->flags) + release_resource(res); gpmc_cs_set_reserved(cs, 0); spin_unlock(&gpmc_mem_lock); } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 1f33f5db10d5..66c60fe1104c 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2546,11 +2546,12 @@ static int __init _init(struct omap_hwmod *oh, void *data) return -EINVAL; } - if (np) + if (np) { if (of_find_property(np, "ti,no-reset-on-init", NULL)) oh->flags |= HWMOD_INIT_NO_RESET; if (of_find_property(np, "ti,no-idle-on-init", NULL)) oh->flags |= HWMOD_INIT_NO_IDLE; + } oh->_state = _HWMOD_STATE_INITIALIZED; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index a123ff0070bd..71ac7d5f3385 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1964,7 +1964,7 @@ static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = { static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = { .name = "usb_host_hs", .class = &omap3xxx_usb_host_hs_hwmod_class, - .clkdm_name = "l3_init_clkdm", + .clkdm_name = "usbhost_clkdm", .mpu_irqs = omap3xxx_usb_host_hs_irqs, .main_clk = "usbhost_48m_fck", .prcm = { @@ -2047,7 +2047,7 @@ static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = { static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = { .name = "usb_tll_hs", .class = &omap3xxx_usb_tll_hs_hwmod_class, - .clkdm_name = "l3_init_clkdm", + .clkdm_name = "core_l4_clkdm", .mpu_irqs = omap3xxx_usb_tll_hs_irqs, .main_clk = "usbtll_fck", .prcm = { diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 1f3770a8a728..87099bb6de69 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -330,10 +330,6 @@ void omap_sram_idle(void) omap3_sram_restore_context(); omap2_sms_restore_context(); } - if (core_next_state == PWRDM_POWER_OFF) - omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, - OMAP3430_GR_MOD, - OMAP3_PRM_VOLTCTRL_OFFSET); } omap3_intc_resume_idle(); diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 14f2cae4109c..2412efb6cdd9 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -5,6 +5,11 @@ menu "Orion Implementations" config ARCH_ORION5X_DT bool "Marvell Orion5x Flattened Device Tree" select USE_OF + select ORION_CLK + select ORION_IRQCHIP + select ORION_TIMER + select PINCTRL + select PINCTRL_ORION help Say 'Y' here if you want your kernel to support the Marvell Orion5x using flattened device tree. @@ -23,6 +28,14 @@ config MACH_RD88F5182 Say 'Y' here if you want your kernel to support the Marvell Orion-NAS (88F5182) RD2 +config MACH_RD88F5182_DT + bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)" + select ARCH_ORION5X_DT + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the Marvell + Orion-NAS (88F5182) RD2, Flattened Device Tree. + config MACH_KUROBOX_PRO bool "KuroBox Pro" select I2C_BOARDINFO @@ -102,28 +115,13 @@ config MACH_MV2120 Say 'Y' here if you want your kernel to support the HP Media Vault mv2120 or mv5100. -config MACH_EDMINI_V2_DT - bool "LaCie Ethernet Disk mini V2 (Flattened Device Tree)" - select I2C_BOARDINFO +config MACH_D2NET_DT + bool "LaCie d2 Network / Big Disk Network (Flattened Device Tree)" select ARCH_ORION5X_DT help Say 'Y' here if you want your kernel to support the - LaCie Ethernet Disk mini V2 (Flattened Device Tree). - -config MACH_D2NET - bool "LaCie d2 Network" - select I2C_BOARDINFO - help - Say 'Y' here if you want your kernel to support the LaCie d2 Network NAS. -config MACH_BIGDISK - bool "LaCie Big Disk Network" - select I2C_BOARDINFO - help - Say 'Y' here if you want your kernel to support the - LaCie Big Disk Network NAS. - config MACH_NET2BIG bool "LaCie 2Big Network" select I2C_BOARDINFO @@ -131,8 +129,9 @@ config MACH_NET2BIG Say 'Y' here if you want your kernel to support the LaCie 2Big Network NAS. -config MACH_MSS2 - bool "Maxtor Shared Storage II" +config MACH_MSS2_DT + bool "Maxtor Shared Storage II (Flattened Device Tree)" + select ARCH_ORION5X_DT help Say 'Y' here if you want your kernel to support the Maxtor Shared Storage II platform. diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 45da805fb236..a40b5c9a58c4 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -12,10 +12,7 @@ obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o -obj-$(CONFIG_MACH_D2NET) += d2net-setup.o -obj-$(CONFIG_MACH_BIGDISK) += d2net-setup.o obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o -obj-$(CONFIG_MACH_MSS2) += mss2-setup.o obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o @@ -23,4 +20,6 @@ obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o obj-$(CONFIG_MACH_LINKSTATION_LSCHL) += ls-chl-setup.o obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o -obj-$(CONFIG_MACH_EDMINI_V2_DT) += edmini_v2-setup.o +obj-$(CONFIG_MACH_D2NET_DT) += board-d2net.o +obj-$(CONFIG_MACH_MSS2_DT) += board-mss2.o +obj-$(CONFIG_MACH_RD88F5182_DT) += board-rd88f5182.o diff --git a/arch/arm/mach-orion5x/board-d2net.c b/arch/arm/mach-orion5x/board-d2net.c new file mode 100644 index 000000000000..8a7284124153 --- /dev/null +++ b/arch/arm/mach-orion5x/board-d2net.c @@ -0,0 +1,109 @@ +/* + * arch/arm/mach-orion5x/board-d2net.c + * + * LaCie d2Network and Big Disk Network NAS setup + * + * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <mach/orion5x.h> +#include <plat/orion-gpio.h> +#include "common.h" + +/***************************************************************************** + * LaCie d2 Network Info + ****************************************************************************/ + +/***************************************************************************** + * GPIO LED's + ****************************************************************************/ + +/* + * The blue front LED is wired to the CPLD and can blink in relation with the + * SATA activity. + * + * The following array detail the different LED registers and the combination + * of their possible values: + * + * led_off | blink_ctrl | SATA active | LED state + * | | | + * 1 | x | x | off + * 0 | 0 | 0 | off + * 0 | 1 | 0 | blink (rate 300ms) + * 0 | x | 1 | on + * + * Notes: The blue and the red front LED's can't be on at the same time. + * Red LED have priority. + */ + +#define D2NET_GPIO_RED_LED 6 +#define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16 +#define D2NET_GPIO_BLUE_LED_OFF 23 + +static struct gpio_led d2net_leds[] = { + { + .name = "d2net:blue:sata", + .default_trigger = "default-on", + .gpio = D2NET_GPIO_BLUE_LED_OFF, + .active_low = 1, + }, + { + .name = "d2net:red:fail", + .gpio = D2NET_GPIO_RED_LED, + }, +}; + +static struct gpio_led_platform_data d2net_led_data = { + .num_leds = ARRAY_SIZE(d2net_leds), + .leds = d2net_leds, +}; + +static struct platform_device d2net_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &d2net_led_data, + }, +}; + +static void __init d2net_gpio_leds_init(void) +{ + int err; + + /* Configure register blink_ctrl to allow SATA activity LED blinking. */ + err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink"); + if (err == 0) { + err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1); + if (err) + gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL); + } + if (err) + pr_err("d2net: failed to configure blue LED blink GPIO\n"); + + platform_device_register(&d2net_gpio_leds); +} + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +void __init d2net_init(void) +{ + d2net_gpio_leds_init(); + + pr_notice("d2net: Flash write are not yet supported.\n"); +} diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c index c134a826070a..35d418faf8f1 100644 --- a/arch/arm/mach-orion5x/board-dt.c +++ b/arch/arm/mach-orion5x/board-dt.c @@ -15,10 +15,16 @@ #include <linux/of.h> #include <linux/of_platform.h> #include <linux/cpu.h> +#include <linux/mbus.h> +#include <linux/clk-provider.h> +#include <linux/clocksource.h> #include <asm/system_misc.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> #include <mach/orion5x.h> +#include <mach/bridge-regs.h> #include <plat/irq.h> +#include <plat/time.h> #include "common.h" static struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = { @@ -39,14 +45,13 @@ static void __init orion5x_dt_init(void) orion5x_id(&dev, &rev, &dev_name); printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk); + BUG_ON(mvebu_mbus_dt_init()); + /* * Setup Orion address map */ orion5x_setup_wins(); - /* Setup root of clk tree */ - clk_init(); - /* * Don't issue "Wait for Interrupt" instruction if we are * running on D0 5281 silicon. @@ -56,8 +61,8 @@ static void __init orion5x_dt_init(void) cpu_idle_poll_ctrl(true); } - if (of_machine_is_compatible("lacie,ethernet-disk-mini-v2")) - edmini_v2_init(); + if (of_machine_is_compatible("maxtor,shared-storage-2")) + mss2_init(); of_platform_populate(NULL, of_default_bus_match_table, orion5x_auxdata_lookup, NULL); @@ -71,9 +76,6 @@ static const char *orion5x_dt_compat[] = { DT_MACHINE_START(ORION5X_DT, "Marvell Orion5x (Flattened Device Tree)") /* Maintainer: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */ .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion_dt_init_irq, - .init_time = orion5x_timer_init, .init_machine = orion5x_dt_init, .restart = orion5x_restart, .dt_compat = orion5x_dt_compat, diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c new file mode 100644 index 000000000000..66f9c3ba86cc --- /dev/null +++ b/arch/arm/mach-orion5x/board-mss2.c @@ -0,0 +1,90 @@ +/* + * Maxtor Shared Storage II Board Setup + * + * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <mach/orion5x.h> +#include <mach/bridge-regs.h> +#include "common.h" + +/***************************************************************************** + * Maxtor Shared Storage II Info + ****************************************************************************/ + +/**************************************************************************** + * PCI setup + ****************************************************************************/ +static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + + return -1; +} + +static struct hw_pci mss2_pci __initdata = { + .nr_controllers = 2, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = mss2_pci_map_irq, +}; + +static int __init mss2_pci_init(void) +{ + if (machine_is_mss2()) + pci_common_init(&mss2_pci); + + return 0; +} +subsys_initcall(mss2_pci_init); + +/***************************************************************************** + * MSS2 power off method + ****************************************************************************/ +/* + * On the Maxtor Shared Storage II, the shutdown process is the following : + * - Userland modifies U-boot env to tell U-boot to go idle at next boot + * - The board reboots + * - U-boot starts and go into an idle mode until the user press "power" + */ +static void mss2_power_off(void) +{ + u32 reg; + + /* + * Enable and issue soft reset + */ + reg = readl(RSTOUTn_MASK); + reg |= 1 << 2; + writel(reg, RSTOUTn_MASK); + + reg = readl(CPU_SOFT_RESET); + reg |= 1; + writel(reg, CPU_SOFT_RESET); +} + +void __init mss2_init(void) +{ + /* register mss2 specific power-off method */ + pm_power_off = mss2_power_off; +} diff --git a/arch/arm/mach-orion5x/board-rd88f5182.c b/arch/arm/mach-orion5x/board-rd88f5182.c new file mode 100644 index 000000000000..270824b0e50f --- /dev/null +++ b/arch/arm/mach-orion5x/board-rd88f5182.c @@ -0,0 +1,116 @@ +/* + * arch/arm/mach-orion5x/rd88f5182-setup.c + * + * Marvell Orion-NAS Reference Design Setup + * + * Maintainer: Ronen Shitrit <rshitrit@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/gpio.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <mach/orion5x.h> +#include "common.h" + +/***************************************************************************** + * RD-88F5182 Info + ****************************************************************************/ + +/* + * PCI + */ + +#define RD88F5182_PCI_SLOT0_OFFS 7 +#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7 +#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6 + +/***************************************************************************** + * PCI + ****************************************************************************/ + +static void __init rd88f5182_pci_preinit(void) +{ + int pin; + + /* + * Configure PCI GPIO IRQ pins + */ + pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN; + if (gpio_request(pin, "PCI IntA") == 0) { + if (gpio_direction_input(pin) == 0) { + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin); + } + + pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN; + if (gpio_request(pin, "PCI IntB") == 0) { + if (gpio_direction_input(pin) == 0) { + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin); + } +} + +static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) +{ + int irq; + + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + + /* + * PCI IRQs are connected via GPIOs + */ + switch (slot - RD88F5182_PCI_SLOT0_OFFS) { + case 0: + if (pin == 1) + return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN); + else + return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN); + default: + return -1; + } +} + +static struct hw_pci rd88f5182_pci __initdata = { + .nr_controllers = 2, + .preinit = rd88f5182_pci_preinit, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = rd88f5182_pci_map_irq, +}; + +static int __init rd88f5182_pci_init(void) +{ + if (of_machine_is_compatible("marvell,rd-88f5182-nas")) + pci_common_init(&rd88f5182_pci); + + return 0; +} + +subsys_initcall(rd88f5182_pci_init); diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index f565f9944af2..db7e056493a0 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -64,17 +64,16 @@ int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); -/* board init functions for boards not fully converted to fdt */ -#ifdef CONFIG_MACH_EDMINI_V2_DT -void edmini_v2_init(void); -#else -static inline void edmini_v2_init(void) {}; -#endif - struct meminfo; struct tag; extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *); +#ifdef CONFIG_MACH_MSS2_DT +extern void mss2_init(void); +#else +static inline void mss2_init(void) {} +#endif + /***************************************************************************** * Helpers to access Orion registers ****************************************************************************/ diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c deleted file mode 100644 index 8f68b745c1d5..000000000000 --- a/arch/arm/mach-orion5x/d2net-setup.c +++ /dev/null @@ -1,365 +0,0 @@ -/* - * arch/arm/mach-orion5x/d2net-setup.c - * - * LaCie d2Network and Big Disk Network NAS setup - * - * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <mach/orion5x.h> -#include <plat/orion-gpio.h> -#include "common.h" -#include "mpp.h" - -/***************************************************************************** - * LaCie d2 Network Info - ****************************************************************************/ - -/* - * 512KB NOR flash Device bus boot chip select - */ - -#define D2NET_NOR_BOOT_BASE 0xfff80000 -#define D2NET_NOR_BOOT_SIZE SZ_512K - -/***************************************************************************** - * 512KB NOR Flash on Boot Device - ****************************************************************************/ - -/* - * TODO: Check write support on flash MX29LV400CBTC-70G - */ - -static struct mtd_partition d2net_partitions[] = { - { - .name = "Full512kb", - .size = MTDPART_SIZ_FULL, - .offset = 0, - .mask_flags = MTD_WRITEABLE, - }, -}; - -static struct physmap_flash_data d2net_nor_flash_data = { - .width = 1, - .parts = d2net_partitions, - .nr_parts = ARRAY_SIZE(d2net_partitions), -}; - -static struct resource d2net_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = D2NET_NOR_BOOT_BASE, - .end = D2NET_NOR_BOOT_BASE - + D2NET_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device d2net_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &d2net_nor_flash_data, - }, - .num_resources = 1, - .resource = &d2net_nor_flash_resource, -}; - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data d2net_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/***************************************************************************** - * I2C devices - ****************************************************************************/ - -/* - * i2c addr | chip | description - * 0x32 | Ricoh 5C372b | RTC - * 0x3e | GMT G762 | PWM fan controller - * 0x50 | HT24LC08 | eeprom (1kB) - * - * TODO: Add G762 support to the g760a driver. - */ -static struct i2c_board_info __initdata d2net_i2c_devices[] = { - { - I2C_BOARD_INFO("rs5c372b", 0x32), - }, { - I2C_BOARD_INFO("24c08", 0x50), - }, -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ - -static struct mv_sata_platform_data d2net_sata_data = { - .n_ports = 2, -}; - -#define D2NET_GPIO_SATA0_POWER 3 -#define D2NET_GPIO_SATA1_POWER 12 - -static void __init d2net_sata_power_init(void) -{ - int err; - - err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power"); - if (err == 0) { - err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1); - if (err) - gpio_free(D2NET_GPIO_SATA0_POWER); - } - if (err) - pr_err("d2net: failed to configure SATA0 power GPIO\n"); - - err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power"); - if (err == 0) { - err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1); - if (err) - gpio_free(D2NET_GPIO_SATA1_POWER); - } - if (err) - pr_err("d2net: failed to configure SATA1 power GPIO\n"); -} - -/***************************************************************************** - * GPIO LED's - ****************************************************************************/ - -/* - * The blue front LED is wired to the CPLD and can blink in relation with the - * SATA activity. - * - * The following array detail the different LED registers and the combination - * of their possible values: - * - * led_off | blink_ctrl | SATA active | LED state - * | | | - * 1 | x | x | off - * 0 | 0 | 0 | off - * 0 | 1 | 0 | blink (rate 300ms) - * 0 | x | 1 | on - * - * Notes: The blue and the red front LED's can't be on at the same time. - * Red LED have priority. - */ - -#define D2NET_GPIO_RED_LED 6 -#define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16 -#define D2NET_GPIO_BLUE_LED_OFF 23 - -static struct gpio_led d2net_leds[] = { - { - .name = "d2net:blue:sata", - .default_trigger = "default-on", - .gpio = D2NET_GPIO_BLUE_LED_OFF, - .active_low = 1, - }, - { - .name = "d2net:red:fail", - .gpio = D2NET_GPIO_RED_LED, - }, -}; - -static struct gpio_led_platform_data d2net_led_data = { - .num_leds = ARRAY_SIZE(d2net_leds), - .leds = d2net_leds, -}; - -static struct platform_device d2net_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &d2net_led_data, - }, -}; - -static void __init d2net_gpio_leds_init(void) -{ - int err; - - /* Configure GPIO over MPP max number. */ - orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1); - - /* Configure register blink_ctrl to allow SATA activity LED blinking. */ - err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink"); - if (err == 0) { - err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1); - if (err) - gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL); - } - if (err) - pr_err("d2net: failed to configure blue LED blink GPIO\n"); - - platform_device_register(&d2net_gpio_leds); -} - -/**************************************************************************** - * GPIO keys - ****************************************************************************/ - -#define D2NET_GPIO_PUSH_BUTTON 18 -#define D2NET_GPIO_POWER_SWITCH_ON 8 -#define D2NET_GPIO_POWER_SWITCH_OFF 9 - -#define D2NET_SWITCH_POWER_ON 0x1 -#define D2NET_SWITCH_POWER_OFF 0x2 - -static struct gpio_keys_button d2net_buttons[] = { - { - .type = EV_SW, - .code = D2NET_SWITCH_POWER_OFF, - .gpio = D2NET_GPIO_POWER_SWITCH_OFF, - .desc = "Power rocker switch (auto|off)", - .active_low = 0, - }, - { - .type = EV_SW, - .code = D2NET_SWITCH_POWER_ON, - .gpio = D2NET_GPIO_POWER_SWITCH_ON, - .desc = "Power rocker switch (on|auto)", - .active_low = 0, - }, - { - .type = EV_KEY, - .code = KEY_POWER, - .gpio = D2NET_GPIO_PUSH_BUTTON, - .desc = "Front Push Button", - .active_low = 0, - }, -}; - -static struct gpio_keys_platform_data d2net_button_data = { - .buttons = d2net_buttons, - .nbuttons = ARRAY_SIZE(d2net_buttons), -}; - -static struct platform_device d2net_gpio_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &d2net_button_data, - }, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -static unsigned int d2net_mpp_modes[] __initdata = { - MPP0_GPIO, /* Board ID (bit 0) */ - MPP1_GPIO, /* Board ID (bit 1) */ - MPP2_GPIO, /* Board ID (bit 2) */ - MPP3_GPIO, /* SATA 0 power */ - MPP4_UNUSED, - MPP5_GPIO, /* Fan fail detection */ - MPP6_GPIO, /* Red front LED */ - MPP7_UNUSED, - MPP8_GPIO, /* Rear power switch (on|auto) */ - MPP9_GPIO, /* Rear power switch (auto|off) */ - MPP10_UNUSED, - MPP11_UNUSED, - MPP12_GPIO, /* SATA 1 power */ - MPP13_UNUSED, - MPP14_SATA_LED, /* SATA 0 active */ - MPP15_SATA_LED, /* SATA 1 active */ - MPP16_GPIO, /* Blue front LED blink control */ - MPP17_UNUSED, - MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */ - MPP19_UNUSED, - 0, - /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */ - /* 23: Blue front LED off */ - /* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */ -}; - -#define D2NET_GPIO_INHIBIT_POWER_OFF 24 - -static void __init d2net_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion5x_init(); - - orion5x_mpp_conf(d2net_mpp_modes); - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - orion5x_eth_init(&d2net_eth_data); - orion5x_i2c_init(); - orion5x_uart0_init(); - - d2net_sata_power_init(); - orion5x_sata_init(&d2net_sata_data); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - D2NET_NOR_BOOT_BASE, - D2NET_NOR_BOOT_SIZE); - platform_device_register(&d2net_nor_flash); - - platform_device_register(&d2net_gpio_buttons); - - d2net_gpio_leds_init(); - - pr_notice("d2net: Flash write are not yet supported.\n"); - - i2c_register_board_info(0, d2net_i2c_devices, - ARRAY_SIZE(d2net_i2c_devices)); - - orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1); -} - -/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ - -#ifdef CONFIG_MACH_D2NET -MACHINE_START(D2NET, "LaCie d2 Network") - .atag_offset = 0x100, - .init_machine = d2net_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_BIGDISK -MACHINE_START(BIGDISK, "LaCie Big Disk Network") - .atag_offset = 0x100, - .init_machine = d2net_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END -#endif - diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c deleted file mode 100644 index f66c1b2ee8c1..000000000000 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - * arch/arm/mach-orion5x/edmini_v2-setup.c - * - * LaCie Ethernet Disk mini V2 Setup - * - * Copyright (C) 2008 Christopher Moore <moore@free.fr> - * Copyright (C) 2008 Albert Aribaud <albert.aribaud@free.fr> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -/* - * TODO: add Orion USB device port init when kernel.org support is added. - * TODO: add flash write support: see below. - * TODO: add power-off support. - * TODO: add I2C EEPROM support. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mbus.h> -#include <linux/mtd/physmap.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <mach/orion5x.h> -#include "common.h" -#include "mpp.h" - -/***************************************************************************** - * EDMINI_V2 Info - ****************************************************************************/ - -/* - * 512KB NOR flash Device bus boot chip select - */ - -#define EDMINI_V2_NOR_BOOT_BASE 0xfff80000 -#define EDMINI_V2_NOR_BOOT_SIZE SZ_512K - -/***************************************************************************** - * 512KB NOR Flash on BOOT Device - ****************************************************************************/ - -/* - * Currently the MTD code does not recognize the MX29LV400CBCT as a bottom - * -type device. This could cause risks of accidentally erasing critical - * flash sectors. We thus define a single, write-protected partition covering - * the whole flash. - * TODO: once the flash part TOP/BOTTOM detection issue is sorted out in the MTD - * code, break this into at least three partitions: 'u-boot code', 'u-boot - * environment' and 'whatever is left'. - */ - -static struct mtd_partition edmini_v2_partitions[] = { - { - .name = "Full512kb", - .size = 0x00080000, - .offset = 0x00000000, - .mask_flags = MTD_WRITEABLE, - }, -}; - -static struct physmap_flash_data edmini_v2_nor_flash_data = { - .width = 1, - .parts = edmini_v2_partitions, - .nr_parts = ARRAY_SIZE(edmini_v2_partitions), -}; - -static struct resource edmini_v2_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = EDMINI_V2_NOR_BOOT_BASE, - .end = EDMINI_V2_NOR_BOOT_BASE - + EDMINI_V2_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device edmini_v2_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edmini_v2_nor_flash_data, - }, - .num_resources = 1, - .resource = &edmini_v2_nor_flash_resource, -}; - -/***************************************************************************** - * RTC 5C372a on I2C bus - ****************************************************************************/ - -#define EDMINIV2_RTC_GPIO 3 - -static struct i2c_board_info __initdata edmini_v2_i2c_rtc = { - I2C_BOARD_INFO("rs5c372a", 0x32), - .irq = 0, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ -static unsigned int edminiv2_mpp_modes[] __initdata = { - MPP0_UNUSED, - MPP1_UNUSED, - MPP2_UNUSED, - MPP3_GPIO, /* RTC interrupt */ - MPP4_UNUSED, - MPP5_UNUSED, - MPP6_UNUSED, - MPP7_UNUSED, - MPP8_UNUSED, - MPP9_UNUSED, - MPP10_UNUSED, - MPP11_UNUSED, - MPP12_SATA_LED, /* SATA 0 presence */ - MPP13_SATA_LED, /* SATA 1 presence */ - MPP14_SATA_LED, /* SATA 0 active */ - MPP15_SATA_LED, /* SATA 1 active */ - /* 16: Power LED control (0 = On, 1 = Off) */ - MPP16_GPIO, - /* 17: Power LED control select (0 = CPLD, 1 = GPIO16) */ - MPP17_GPIO, - /* 18: Power button status (0 = Released, 1 = Pressed) */ - MPP18_GPIO, - MPP19_UNUSED, - 0, -}; - -void __init edmini_v2_init(void) -{ - orion5x_mpp_conf(edminiv2_mpp_modes); - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - EDMINI_V2_NOR_BOOT_BASE, - EDMINI_V2_NOR_BOOT_SIZE); - platform_device_register(&edmini_v2_nor_flash); - - pr_notice("edmini_v2: USB device port, flash write and power-off " - "are not yet supported.\n"); - - /* Get RTC IRQ and register the chip */ - if (gpio_request(EDMINIV2_RTC_GPIO, "rtc") == 0) { - if (gpio_direction_input(EDMINIV2_RTC_GPIO) == 0) - edmini_v2_i2c_rtc.irq = gpio_to_irq(EDMINIV2_RTC_GPIO); - else - gpio_free(EDMINIV2_RTC_GPIO); - } - - if (edmini_v2_i2c_rtc.irq == 0) - pr_warning("edmini_v2: failed to get RTC IRQ\n"); - - i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1); -} diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index 9654b0cc5892..cd4bac4d7e43 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -16,6 +16,7 @@ #include <mach/bridge-regs.h> #include <plat/orion-gpio.h> #include <plat/irq.h> +#include <asm/exception.h> #include "common.h" static int __initdata gpio0_irqs[4] = { @@ -25,10 +26,37 @@ static int __initdata gpio0_irqs[4] = { IRQ_ORION5X_GPIO_24_31, }; +#ifdef CONFIG_MULTI_IRQ_HANDLER +/* + * Compiling with both non-DT and DT support enabled, will + * break asm irq handler used by non-DT boards. Therefore, + * we provide a C-style irq handler even for non-DT boards, + * if MULTI_IRQ_HANDLER is set. + */ + +asmlinkage void +__exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs) +{ + u32 stat; + + stat = readl_relaxed(MAIN_IRQ_CAUSE); + stat &= readl_relaxed(MAIN_IRQ_MASK); + if (stat) { + unsigned int hwirq = __fls(stat); + handle_IRQ(hwirq, regs); + return; + } +} +#endif + void __init orion5x_init_irq(void) { orion_irq_init(0, MAIN_IRQ_MASK); +#ifdef CONFIG_MULTI_IRQ_HANDLER + set_handle_irq(orion5x_legacy_handle_irq); +#endif + /* * Initialize gpiolib for GPIOs 0-31. */ diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c deleted file mode 100644 index e105130ba51c..000000000000 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * Maxtor Shared Storage II Board Setup - * - * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <mach/orion5x.h> -#include <mach/bridge-regs.h> -#include "common.h" -#include "mpp.h" - -#define MSS2_NOR_BOOT_BASE 0xff800000 -#define MSS2_NOR_BOOT_SIZE SZ_256K - -/***************************************************************************** - * Maxtor Shared Storage II Info - ****************************************************************************/ - -/* - * Maxtor Shared Storage II hardware : - * - Marvell 88F5182-A2 C500 - * - Marvell 88E1111 Gigabit Ethernet PHY - * - RTC M41T81 (@0x68) on I2C bus - * - 256KB NOR flash - * - 64MB of RAM - */ - -/***************************************************************************** - * 256KB NOR Flash on BOOT Device - ****************************************************************************/ - -static struct physmap_flash_data mss2_nor_flash_data = { - .width = 1, -}; - -static struct resource mss2_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = MSS2_NOR_BOOT_BASE, - .end = MSS2_NOR_BOOT_BASE + MSS2_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device mss2_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &mss2_nor_flash_data, - }, - .resource = &mss2_nor_flash_resource, - .num_resources = 1, -}; - -/**************************************************************************** - * PCI setup - ****************************************************************************/ -static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq; - - /* - * Check for devices with hard-wired IRQs. - */ - irq = orion5x_pci_map_irq(dev, slot, pin); - if (irq != -1) - return irq; - - return -1; -} - -static struct hw_pci mss2_pci __initdata = { - .nr_controllers = 2, - .setup = orion5x_pci_sys_setup, - .scan = orion5x_pci_sys_scan_bus, - .map_irq = mss2_pci_map_irq, -}; - -static int __init mss2_pci_init(void) -{ - if (machine_is_mss2()) - pci_common_init(&mss2_pci); - - return 0; -} -subsys_initcall(mss2_pci_init); - - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data mss2_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ - -static struct mv_sata_platform_data mss2_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * GPIO buttons - ****************************************************************************/ - -#define MSS2_GPIO_KEY_RESET 12 -#define MSS2_GPIO_KEY_POWER 11 - -static struct gpio_keys_button mss2_buttons[] = { - { - .code = KEY_POWER, - .gpio = MSS2_GPIO_KEY_POWER, - .desc = "Power", - .active_low = 1, - }, { - .code = KEY_RESTART, - .gpio = MSS2_GPIO_KEY_RESET, - .desc = "Reset", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data mss2_button_data = { - .buttons = mss2_buttons, - .nbuttons = ARRAY_SIZE(mss2_buttons), -}; - -static struct platform_device mss2_button_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &mss2_button_data, - }, -}; - -/***************************************************************************** - * RTC m41t81 on I2C bus - ****************************************************************************/ - -#define MSS2_GPIO_RTC_IRQ 3 - -static struct i2c_board_info __initdata mss2_i2c_rtc = { - I2C_BOARD_INFO("m41t81", 0x68), -}; - -/***************************************************************************** - * MSS2 power off method - ****************************************************************************/ -/* - * On the Maxtor Shared Storage II, the shutdown process is the following : - * - Userland modifies U-boot env to tell U-boot to go idle at next boot - * - The board reboots - * - U-boot starts and go into an idle mode until the user press "power" - */ -static void mss2_power_off(void) -{ - u32 reg; - - /* - * Enable and issue soft reset - */ - reg = readl(RSTOUTn_MASK); - reg |= 1 << 2; - writel(reg, RSTOUTn_MASK); - - reg = readl(CPU_SOFT_RESET); - reg |= 1; - writel(reg, CPU_SOFT_RESET); -} - -/**************************************************************************** - * General Setup - ****************************************************************************/ -static unsigned int mss2_mpp_modes[] __initdata = { - MPP0_GPIO, /* Power LED */ - MPP1_GPIO, /* Error LED */ - MPP2_UNUSED, - MPP3_GPIO, /* RTC interrupt */ - MPP4_GPIO, /* HDD ind. (Single/Dual)*/ - MPP5_GPIO, /* HD0 5V control */ - MPP6_GPIO, /* HD0 12V control */ - MPP7_GPIO, /* HD1 5V control */ - MPP8_GPIO, /* HD1 12V control */ - MPP9_UNUSED, - MPP10_GPIO, /* Fan control */ - MPP11_GPIO, /* Power button */ - MPP12_GPIO, /* Reset button */ - MPP13_UNUSED, - MPP14_SATA_LED, /* SATA 0 active */ - MPP15_SATA_LED, /* SATA 1 active */ - MPP16_UNUSED, - MPP17_UNUSED, - MPP18_UNUSED, - MPP19_UNUSED, - 0, -}; - -static void __init mss2_init(void) -{ - /* Setup basic Orion functions. Need to be called early. */ - orion5x_init(); - - orion5x_mpp_conf(mss2_mpp_modes); - - /* - * MPP[20] Unused - * MPP[21] PCI clock - * MPP[22] USB 0 over current - * MPP[23] USB 1 over current - */ - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - orion5x_ehci1_init(); - orion5x_eth_init(&mss2_eth_data); - orion5x_i2c_init(); - orion5x_sata_init(&mss2_sata_data); - orion5x_uart0_init(); - orion5x_xor_init(); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - MSS2_NOR_BOOT_BASE, - MSS2_NOR_BOOT_SIZE); - platform_device_register(&mss2_nor_flash); - - platform_device_register(&mss2_button_device); - - if (gpio_request(MSS2_GPIO_RTC_IRQ, "rtc") == 0) { - if (gpio_direction_input(MSS2_GPIO_RTC_IRQ) == 0) - mss2_i2c_rtc.irq = gpio_to_irq(MSS2_GPIO_RTC_IRQ); - else - gpio_free(MSS2_GPIO_RTC_IRQ); - } - i2c_register_board_info(0, &mss2_i2c_rtc, 1); - - /* register mss2 specific power-off method */ - pm_power_off = mss2_power_off; -} - -MACHINE_START(MSS2, "Maxtor Shared Storage II") - /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */ - .atag_offset = 0x100, - .init_machine = mss2_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h index 8bc02913517c..0e1bb46264f9 100644 --- a/arch/arm/mach-pxa/include/mach/hx4700.h +++ b/arch/arm/mach-pxa/include/mach/hx4700.h @@ -14,6 +14,7 @@ #include <linux/gpio.h> #include <linux/mfd/asic3.h> +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */ #define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO #define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS) diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index a028be234334..6aa22147cace 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -3,8 +3,6 @@ config ARCH_QCOM select ARCH_REQUIRE_GPIOLIB select ARM_GIC select CLKSRC_OF - select GENERIC_CLOCKEVENTS - select HAVE_SMP select QCOM_SCM if SMP help Support for Qualcomm's devicetree based systems. diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index dbfa5a26cfff..072842f6491b 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -152,7 +152,7 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-pmu"); if (!node) { - pr_err("%s: could not find sram dt node\n", __func__); + pr_err("%s: could not find pmu dt node\n", __func__); return; } diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 0f92ba8e7884..58bc6db6e79d 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -108,6 +108,7 @@ config ARCH_R8A7778 select SH_CLK_CPG select ARM_GIC select SYS_SUPPORTS_SH_TMU + select RENESAS_INTC_IRQPIN config ARCH_R8A7779 bool "R-Car H1 (R8A77790)" @@ -140,16 +141,6 @@ config ARCH_R8A7791 select SYS_SUPPORTS_SH_CMT select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE -config ARCH_EMEV2 - bool "Emma Mobile EV2" - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_GIC - select CPU_V7 - select MIGHT_HAVE_PCI - select USE_OF - select AUTO_ZRELADDR - select SYS_SUPPORTS_EM_STI - config ARCH_R7S72100 bool "RZ/A1H (R7S72100)" select ARCH_WANT_OPTIONAL_GPIOLIB @@ -216,7 +207,6 @@ config MACH_BOCKW depends on ARCH_R8A7778 select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR - select RENESAS_INTC_IRQPIN select SND_SOC_AK4554 if SND_SIMPLE_CARD select SND_SOC_AK4642 if SND_SIMPLE_CARD select USE_OF @@ -225,7 +215,6 @@ config MACH_BOCKW_REFERENCE bool "BOCK-W - Reference Device Tree Implementation" depends on ARCH_R8A7778 select ARCH_REQUIRE_GPIOLIB - select RENESAS_INTC_IRQPIN select REGULATOR_FIXED_VOLTAGE if REGULATOR select USE_OF ---help--- diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 4caffc912a81..9c5cd8c53a85 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -21,8 +21,8 @@ obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o # Clock objects -ifndef CONFIG_COMMON_CLK obj-y += clock.o +ifndef CONFIG_COMMON_CLK obj-$(CONFIG_ARCH_SH7372) += clock-sh7372.o obj-$(CONFIG_ARCH_SH73A0) += clock-sh73a0.o obj-$(CONFIG_ARCH_R8A73A4) += clock-r8a73a4.o @@ -31,7 +31,6 @@ obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o obj-$(CONFIG_ARCH_R8A7791) += clock-r8a7791.o -obj-$(CONFIG_ARCH_EMEV2) += clock-emev2.o obj-$(CONFIG_ARCH_R7S72100) += clock-r7s72100.o endif diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c index 57d1a78367b6..57d246eb8813 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c @@ -187,7 +187,7 @@ static const char *eva_boards_compat_dt[] __initdata = { DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference") .map_io = r8a7740_map_io, - .init_early = r8a7740_init_delay, + .init_early = shmobile_init_delay, .init_irq = r8a7740_init_irq_of, .init_machine = eva_init, .init_late = shmobile_init_late, diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 2858f380beae..486063db2a2f 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -992,6 +992,7 @@ static struct asoc_simple_card_info fsi_wm8978_info = { .platform = "sh_fsi2", .daifmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM, .cpu_dai = { + .fmt = SND_SOC_DAIFMT_IB_NF, .name = "fsia-dai", }, .codec_dai = { diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c index a3fd30242bd8..ff33d9c4b658 100644 --- a/arch/arm/mach-shmobile/board-koelsch-reference.c +++ b/arch/arm/mach-shmobile/board-koelsch-reference.c @@ -139,7 +139,7 @@ static const char * const koelsch_boards_compat_dt[] __initconst = { DT_MACHINE_START(KOELSCH_DT, "koelsch") .smp = smp_ops(r8a7791_smp_ops), - .init_early = r8a7791_init_early, + .init_early = shmobile_init_delay, .init_time = rcar_gen2_timer_init, .init_machine = koelsch_add_standard_devices, .init_late = shmobile_init_late, diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c index 5a034ff405d0..3cd8008d09dd 100644 --- a/arch/arm/mach-shmobile/board-koelsch.c +++ b/arch/arm/mach-shmobile/board-koelsch.c @@ -522,7 +522,7 @@ static const char * const koelsch_boards_compat_dt[] __initconst = { DT_MACHINE_START(KOELSCH_DT, "koelsch") .smp = smp_ops(r8a7791_smp_ops), - .init_early = r8a7791_init_early, + .init_early = shmobile_init_delay, .init_time = rcar_gen2_timer_init, .init_machine = koelsch_init, .init_late = shmobile_init_late, diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index f0104bfe544e..18c7e0311aa6 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -588,14 +588,12 @@ static struct asoc_simple_card_info rsnd_card_info = { .card = "SSI01-AK4643", .codec = "ak4642-codec.2-0012", .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_LEFT_J, + .daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM, .cpu_dai = { .name = "rcar_sound", - .fmt = SND_SOC_DAIFMT_CBS_CFS, }, .codec_dai = { .name = "ak4642-hifi", - .fmt = SND_SOC_DAIFMT_CBM_CFM, .sysclk = 11289600, }, }; diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c deleted file mode 100644 index 5ac13ba71d54..000000000000 --- a/arch/arm/mach-shmobile/clock-emev2.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Emma Mobile EV2 clock framework support - * - * Copyright (C) 2012 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/sh_clk.h> -#include <linux/clkdev.h> -#include <mach/common.h> - -#define EMEV2_SMU_BASE 0xe0110000 - -/* EMEV2 SMU registers */ -#define USIAU0_RSTCTRL 0x094 -#define USIBU1_RSTCTRL 0x0ac -#define USIBU2_RSTCTRL 0x0b0 -#define USIBU3_RSTCTRL 0x0b4 -#define STI_RSTCTRL 0x124 -#define USIAU0GCLKCTRL 0x4a0 -#define USIBU1GCLKCTRL 0x4b8 -#define USIBU2GCLKCTRL 0x4bc -#define USIBU3GCLKCTRL 0x04c0 -#define STIGCLKCTRL 0x528 -#define USIAU0SCLKDIV 0x61c -#define USIB2SCLKDIV 0x65c -#define USIB3SCLKDIV 0x660 -#define STI_CLKSEL 0x688 - -/* not pretty, but hey */ -static void __iomem *smu_base; - -static void emev2_smu_write(unsigned long value, int offs) -{ - BUG_ON(!smu_base || (offs >= PAGE_SIZE)); - iowrite32(value, smu_base + offs); -} - -static struct clk_mapping smu_mapping = { - .phys = EMEV2_SMU_BASE, - .len = PAGE_SIZE, -}; - -/* Fixed 32 KHz root clock from C32K pin */ -static struct clk c32k_clk = { - .rate = 32768, - .mapping = &smu_mapping, -}; - -/* PLL3 multiplies C32K with 7000 */ -static unsigned long pll3_recalc(struct clk *clk) -{ - return clk->parent->rate * 7000; -} - -static struct sh_clk_ops pll3_clk_ops = { - .recalc = pll3_recalc, -}; - -static struct clk pll3_clk = { - .ops = &pll3_clk_ops, - .parent = &c32k_clk, -}; - -static struct clk *main_clks[] = { - &c32k_clk, - &pll3_clk, -}; - -enum { SCLKDIV_USIAU0, SCLKDIV_USIBU2, SCLKDIV_USIBU1, SCLKDIV_USIBU3, - SCLKDIV_NR }; - -#define SCLKDIV(_reg, _shift) \ -{ \ - .parent = &pll3_clk, \ - .enable_reg = IOMEM(EMEV2_SMU_BASE + (_reg)), \ - .enable_bit = _shift, \ -} - -static struct clk sclkdiv_clks[SCLKDIV_NR] = { - [SCLKDIV_USIAU0] = SCLKDIV(USIAU0SCLKDIV, 0), - [SCLKDIV_USIBU2] = SCLKDIV(USIB2SCLKDIV, 16), - [SCLKDIV_USIBU1] = SCLKDIV(USIB2SCLKDIV, 0), - [SCLKDIV_USIBU3] = SCLKDIV(USIB3SCLKDIV, 0), -}; - -enum { GCLK_USIAU0_SCLK, GCLK_USIBU1_SCLK, GCLK_USIBU2_SCLK, GCLK_USIBU3_SCLK, - GCLK_STI_SCLK, - GCLK_NR }; - -#define GCLK_SCLK(_parent, _reg) \ -{ \ - .parent = _parent, \ - .enable_reg = IOMEM(EMEV2_SMU_BASE + (_reg)), \ - .enable_bit = 1, /* SCLK_GCC */ \ -} - -static struct clk gclk_clks[GCLK_NR] = { - [GCLK_USIAU0_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIAU0], - USIAU0GCLKCTRL), - [GCLK_USIBU1_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU1], - USIBU1GCLKCTRL), - [GCLK_USIBU2_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU2], - USIBU2GCLKCTRL), - [GCLK_USIBU3_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU3], - USIBU3GCLKCTRL), - [GCLK_STI_SCLK] = GCLK_SCLK(&c32k_clk, STIGCLKCTRL), -}; - -static int emev2_gclk_enable(struct clk *clk) -{ - iowrite32(ioread32(clk->mapped_reg) | (1 << clk->enable_bit), - clk->mapped_reg); - return 0; -} - -static void emev2_gclk_disable(struct clk *clk) -{ - iowrite32(ioread32(clk->mapped_reg) & ~(1 << clk->enable_bit), - clk->mapped_reg); -} - -static struct sh_clk_ops emev2_gclk_clk_ops = { - .enable = emev2_gclk_enable, - .disable = emev2_gclk_disable, - .recalc = followparent_recalc, -}; - -static int __init emev2_gclk_register(struct clk *clks, int nr) -{ - struct clk *clkp; - int ret = 0; - int k; - - for (k = 0; !ret && (k < nr); k++) { - clkp = clks + k; - clkp->ops = &emev2_gclk_clk_ops; - ret |= clk_register(clkp); - } - - return ret; -} - -static unsigned long emev2_sclkdiv_recalc(struct clk *clk) -{ - unsigned int sclk_div; - - sclk_div = (ioread32(clk->mapped_reg) >> clk->enable_bit) & 0xff; - - return clk->parent->rate / (sclk_div + 1); -} - -static struct sh_clk_ops emev2_sclkdiv_clk_ops = { - .recalc = emev2_sclkdiv_recalc, -}; - -static int __init emev2_sclkdiv_register(struct clk *clks, int nr) -{ - struct clk *clkp; - int ret = 0; - int k; - - for (k = 0; !ret && (k < nr); k++) { - clkp = clks + k; - clkp->ops = &emev2_sclkdiv_clk_ops; - ret |= clk_register(clkp); - } - - return ret; -} - -static struct clk_lookup lookups[] = { - CLKDEV_DEV_ID("serial8250-em.0", &gclk_clks[GCLK_USIAU0_SCLK]), - CLKDEV_DEV_ID("e1020000.uart", &gclk_clks[GCLK_USIAU0_SCLK]), - CLKDEV_DEV_ID("serial8250-em.1", &gclk_clks[GCLK_USIBU1_SCLK]), - CLKDEV_DEV_ID("e1030000.uart", &gclk_clks[GCLK_USIBU1_SCLK]), - CLKDEV_DEV_ID("serial8250-em.2", &gclk_clks[GCLK_USIBU2_SCLK]), - CLKDEV_DEV_ID("e1040000.uart", &gclk_clks[GCLK_USIBU2_SCLK]), - CLKDEV_DEV_ID("serial8250-em.3", &gclk_clks[GCLK_USIBU3_SCLK]), - CLKDEV_DEV_ID("e1050000.uart", &gclk_clks[GCLK_USIBU3_SCLK]), - CLKDEV_DEV_ID("em_sti.0", &gclk_clks[GCLK_STI_SCLK]), - CLKDEV_DEV_ID("e0180000.sti", &gclk_clks[GCLK_STI_SCLK]), -}; - -void __init emev2_clock_init(void) -{ - int k, ret = 0; - - smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE); - BUG_ON(!smu_base); - - /* setup STI timer to run on 32.768 kHz and deassert reset */ - emev2_smu_write(0, STI_CLKSEL); - emev2_smu_write(1, STI_RSTCTRL); - - /* deassert reset for UART0->UART3 */ - emev2_smu_write(2, USIAU0_RSTCTRL); - emev2_smu_write(2, USIBU1_RSTCTRL); - emev2_smu_write(2, USIBU2_RSTCTRL); - emev2_smu_write(2, USIBU3_RSTCTRL); - - for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) - ret = clk_register(main_clks[k]); - - if (!ret) - ret = emev2_sclkdiv_register(sclkdiv_clks, SCLKDIV_NR); - - if (!ret) - ret = emev2_gclk_register(gclk_clks, GCLK_NR); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - if (!ret) - shmobile_clk_init(); - else - panic("failed to setup emev2 clocks\n"); -} diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index dd989f93498f..433ec674ead1 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -596,7 +596,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("e6bd0000.mmc", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("r8a7740-gether", &mstp_clks[MSTP309]), - CLKDEV_DEV_ID("e9a00000.sh-eth", &mstp_clks[MSTP309]), + CLKDEV_DEV_ID("e9a00000.ethernet", &mstp_clks[MSTP309]), CLKDEV_DEV_ID("renesas-tpu-pwm", &mstp_clks[MSTP304]), CLKDEV_DEV_ID("e6600000.pwm", &mstp_clks[MSTP304]), diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c index 2009a9bc6356..6609beb9b9b4 100644 --- a/arch/arm/mach-shmobile/clock-r8a7778.c +++ b/arch/arm/mach-shmobile/clock-r8a7778.c @@ -170,15 +170,11 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */ [MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 9, 0), /* SSI3 */ [MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 8, 0), /* SRU */ - [MSTP007] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 7, 0), /* HSPI */ + [MSTP007] = SH_CLK_MSTP32(&s_clk, MSTPCR0, 7, 0), /* HSPI */ }; static struct clk_lookup lookups[] = { /* main */ - CLKDEV_CON_ID("audio_clk_a", &audio_clk_a), - CLKDEV_CON_ID("audio_clk_b", &audio_clk_b), - CLKDEV_CON_ID("audio_clk_c", &audio_clk_c), - CLKDEV_CON_ID("audio_clk_internal", &s1_clk), CLKDEV_CON_ID("shyway_clk", &s_clk), CLKDEV_CON_ID("peripheral_clk", &p_clk), @@ -234,15 +230,15 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]), CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]), CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]), - CLKDEV_ICK_ID("scu.0", "rcar_sound", &mstp_clks[MSTP531]), - CLKDEV_ICK_ID("scu.1", "rcar_sound", &mstp_clks[MSTP530]), - CLKDEV_ICK_ID("scu.2", "rcar_sound", &mstp_clks[MSTP529]), - CLKDEV_ICK_ID("scu.3", "rcar_sound", &mstp_clks[MSTP528]), - CLKDEV_ICK_ID("scu.4", "rcar_sound", &mstp_clks[MSTP527]), - CLKDEV_ICK_ID("scu.5", "rcar_sound", &mstp_clks[MSTP526]), - CLKDEV_ICK_ID("scu.6", "rcar_sound", &mstp_clks[MSTP525]), - CLKDEV_ICK_ID("scu.7", "rcar_sound", &mstp_clks[MSTP524]), - CLKDEV_ICK_ID("scu.8", "rcar_sound", &mstp_clks[MSTP523]), + CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP531]), + CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP530]), + CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP529]), + CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP528]), + CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP527]), + CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP526]), + CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP525]), + CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP524]), + CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP523]), }; void __init r8a7778_clock_init(void) diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index 3f93503f5b96..a936ae7de083 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -249,10 +249,10 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP1007] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 7, MSTPSR10, 0), /* SSI8 */ [MSTP1006] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 6, MSTPSR10, 0), /* SSI9 */ [MSTP1005] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 5, MSTPSR10, 0), /* SSI ALL */ - [MSTP931] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */ - [MSTP930] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */ - [MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */ - [MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */ + [MSTP931] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */ + [MSTP930] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */ + [MSTP929] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */ + [MSTP928] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */ [MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */ [MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */ [MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */ @@ -294,10 +294,6 @@ static struct clk mstp_clks[MSTP_NR] = { static struct clk_lookup lookups[] = { /* main clocks */ - CLKDEV_CON_ID("audio_clk_a", &audio_clk_a), - CLKDEV_CON_ID("audio_clk_b", &audio_clk_b), - CLKDEV_CON_ID("audio_clk_c", &audio_clk_c), - CLKDEV_CON_ID("audio_clk_internal", &m2_clk), CLKDEV_CON_ID("extal", &extal_clk), CLKDEV_CON_ID("extal_div2", &extal_div2_clk), CLKDEV_CON_ID("main", &main_clk), @@ -381,16 +377,16 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b), CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c), CLKDEV_ICK_ID("clk_i", "rcar_sound", &m2_clk), - CLKDEV_ICK_ID("scu.0", "rcar_sound", &mstp_clks[MSTP1031]), - CLKDEV_ICK_ID("scu.1", "rcar_sound", &mstp_clks[MSTP1030]), - CLKDEV_ICK_ID("scu.2", "rcar_sound", &mstp_clks[MSTP1029]), - CLKDEV_ICK_ID("scu.3", "rcar_sound", &mstp_clks[MSTP1028]), - CLKDEV_ICK_ID("scu.4", "rcar_sound", &mstp_clks[MSTP1027]), - CLKDEV_ICK_ID("scu.5", "rcar_sound", &mstp_clks[MSTP1026]), - CLKDEV_ICK_ID("scu.6", "rcar_sound", &mstp_clks[MSTP1025]), - CLKDEV_ICK_ID("scu.7", "rcar_sound", &mstp_clks[MSTP1024]), - CLKDEV_ICK_ID("scu.8", "rcar_sound", &mstp_clks[MSTP1023]), - CLKDEV_ICK_ID("scu.9", "rcar_sound", &mstp_clks[MSTP1022]), + CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP1031]), + CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP1030]), + CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP1029]), + CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP1028]), + CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP1027]), + CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP1026]), + CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP1025]), + CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP1024]), + CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP1023]), + CLKDEV_ICK_ID("src.9", "rcar_sound", &mstp_clks[MSTP1022]), CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP1015]), CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP1014]), CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP1013]), diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c index 701383fe3267..3b26c7eee873 100644 --- a/arch/arm/mach-shmobile/clock-r8a7791.c +++ b/arch/arm/mach-shmobile/clock-r8a7791.c @@ -25,6 +25,7 @@ #include <linux/clkdev.h> #include <mach/clock.h> #include <mach/common.h> +#include <mach/rcar-gen2.h> /* * MD EXTAL PLL0 PLL1 PLL3 @@ -43,8 +44,6 @@ * see "p1 / 2" on R8A7791_CLOCK_ROOT() below */ -#define MD(nr) (1 << nr) - #define CPG_BASE 0xe6150000 #define CPG_LEN 0x1000 @@ -68,7 +67,6 @@ #define MSTPSR9 IOMEM(0xe61509a4) #define MSTPSR11 IOMEM(0xe61509ac) -#define MODEMR 0xE6160060 #define SDCKCR 0xE6150074 #define SD1CKCR 0xE6150078 #define SD2CKCR 0xE615026c @@ -190,12 +188,12 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP1108] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 8, MSTPSR11, 0), /* SCIFA5 */ [MSTP1107] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 7, MSTPSR11, 0), /* SCIFA4 */ [MSTP1106] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 6, MSTPSR11, 0), /* SCIFA3 */ - [MSTP931] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */ - [MSTP930] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */ - [MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */ - [MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */ - [MSTP927] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 27, MSTPSR9, 0), /* I2C4 */ - [MSTP925] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 25, MSTPSR9, 0), /* I2C5 */ + [MSTP931] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */ + [MSTP930] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */ + [MSTP929] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */ + [MSTP928] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */ + [MSTP927] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 27, MSTPSR9, 0), /* I2C4 */ + [MSTP925] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 25, MSTPSR9, 0), /* I2C5 */ [MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */ [MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */ [MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */ @@ -295,14 +293,9 @@ static struct clk_lookup lookups[] = { void __init r8a7791_clock_init(void) { - void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE); - u32 mode; + u32 mode = rcar_gen2_read_mode_pins(); int k, ret = 0; - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); - switch (mode & (MD(14) | MD(13))) { case 0: R8A7791_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88); diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c index ad7df629d995..e7232a0373b9 100644 --- a/arch/arm/mach-shmobile/clock.c +++ b/arch/arm/mach-shmobile/clock.c @@ -21,6 +21,32 @@ */ #include <linux/kernel.h> #include <linux/init.h> + +#ifdef CONFIG_COMMON_CLK +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <mach/clock.h> + +void __init shmobile_clk_workaround(const struct clk_name *clks, + int nr_clks, bool enable) +{ + const struct clk_name *clkn; + struct clk *clk; + unsigned int i; + + for (i = 0; i < nr_clks; ++i) { + clkn = clks + i; + clk = clk_get(NULL, clkn->clk); + if (!IS_ERR(clk)) { + clk_register_clkdev(clk, clkn->con_id, clkn->dev_id); + if (enable) + clk_prepare_enable(clk); + clk_put(clk); + } + } +} + +#else /* CONFIG_COMMON_CLK */ #include <linux/sh_clk.h> #include <linux/export.h> #include <mach/clock.h> @@ -58,3 +84,5 @@ void __clk_put(struct clk *clk) { } EXPORT_SYMBOL(__clk_put); + +#endif /* CONFIG_COMMON_CLK */ diff --git a/arch/arm/mach-shmobile/include/mach/clock.h b/arch/arm/mach-shmobile/include/mach/clock.h index 03e56074928c..9a93cf924b9c 100644 --- a/arch/arm/mach-shmobile/include/mach/clock.h +++ b/arch/arm/mach-shmobile/include/mach/clock.h @@ -1,6 +1,21 @@ #ifndef CLOCK_H #define CLOCK_H +#ifdef CONFIG_COMMON_CLK +/* temporary clock configuration helper for platform devices */ + +struct clk_name { + const char *clk; + const char *con_id; + const char *dev_id; +}; + +void shmobile_clk_workaround(const struct clk_name *clks, int nr_clks, + bool enable); + +#else /* CONFIG_COMMON_CLK */ +/* legacy clock implementation */ + unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk); extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops; @@ -36,4 +51,5 @@ do { \ (p)->div = d; \ } while (0) +#endif /* CONFIG_COMMON_CLK */ #endif diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index cb8e32deb2a3..f7a360edcc35 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -4,6 +4,7 @@ extern void shmobile_earlytimer_init(void); extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz, unsigned int mult, unsigned int div); +extern void shmobile_init_delay(void); struct twd_local_timer; extern void shmobile_setup_console(void); extern void shmobile_boot_vector(void); diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h deleted file mode 100644 index fcb142a14e07..000000000000 --- a/arch/arm/mach-shmobile/include/mach/emev2.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_EMEV2_H__ -#define __ASM_EMEV2_H__ - -extern void emev2_map_io(void); -extern void emev2_init_delay(void); -extern void emev2_clock_init(void); -extern struct smp_operations emev2_smp_ops; - -#endif /* __ASM_EMEV2_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h index d07932f872b6..5e3c9ec06303 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7740.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h @@ -47,7 +47,6 @@ enum { }; extern void r8a7740_meram_workaround(void); -extern void r8a7740_init_delay(void); extern void r8a7740_init_irq_of(void); extern void r8a7740_map_io(void); extern void r8a7740_add_early_devices(void); diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h index 200fa699f730..664274cc4b64 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7791.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h @@ -5,7 +5,6 @@ void r8a7791_add_standard_devices(void); void r8a7791_add_dt_devices(void); void r8a7791_clock_init(void); void r8a7791_pinmux_init(void); -void r8a7791_init_early(void); extern struct smp_operations r8a7791_smp_ops; #endif /* __ASM_R8A7791_H__ */ diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c index 1fc05d9453d0..f710235aff2f 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.c +++ b/arch/arm/mach-shmobile/pm-rmobile.c @@ -99,39 +99,7 @@ static int rmobile_pd_power_up(struct generic_pm_domain *genpd) static bool rmobile_pd_active_wakeup(struct device *dev) { - bool (*active_wakeup)(struct device *dev); - - active_wakeup = dev_gpd_data(dev)->ops.active_wakeup; - return active_wakeup ? active_wakeup(dev) : true; -} - -static int rmobile_pd_stop_dev(struct device *dev) -{ - int (*stop)(struct device *dev); - - stop = dev_gpd_data(dev)->ops.stop; - if (stop) { - int ret = stop(dev); - if (ret) - return ret; - } - return pm_clk_suspend(dev); -} - -static int rmobile_pd_start_dev(struct device *dev) -{ - int (*start)(struct device *dev); - int ret; - - ret = pm_clk_resume(dev); - if (ret) - return ret; - - start = dev_gpd_data(dev)->ops.start; - if (start) - ret = start(dev); - - return ret; + return true; } static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd) @@ -140,8 +108,8 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd) struct dev_power_governor *gov = rmobile_pd->gov; pm_genpd_init(genpd, gov ? : &simple_qos_governor, false); - genpd->dev_ops.stop = rmobile_pd_stop_dev; - genpd->dev_ops.start = rmobile_pd_start_dev; + genpd->dev_ops.stop = pm_clk_suspend; + genpd->dev_ops.start = pm_clk_resume; genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup; genpd->dev_irq_safe = true; genpd->power_off = rmobile_pd_power_down; diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index c71d667007b8..d953ff6e78a2 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -21,7 +21,6 @@ #include <linux/init.h> #include <linux/of_platform.h> #include <mach/common.h> -#include <mach/emev2.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -38,23 +37,19 @@ static struct map_desc emev2_io_desc[] __initdata = { #endif }; -void __init emev2_map_io(void) +static void __init emev2_map_io(void) { iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc)); } -void __init emev2_init_delay(void) +static void __init emev2_init_delay(void) { shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */ } static void __init emev2_add_standard_devices_dt(void) { -#ifdef CONFIG_COMMON_CLK of_clk_init(NULL); -#else - emev2_clock_init(); -#endif of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -63,6 +58,8 @@ static const char *emev2_boards_compat_dt[] __initconst = { NULL, }; +extern struct smp_operations emev2_smp_ops; + DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), .map_io = emev2_map_io, diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 8f3c68101d59..7bdc51c195c7 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -887,11 +887,6 @@ void __init r8a7740_add_standard_devices_dt(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -void __init r8a7740_init_delay(void) -{ - shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ -}; - void __init r8a7740_init_irq_of(void) { void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10); @@ -935,9 +930,10 @@ static const char *r8a7740_boards_compat_dt[] __initdata = { DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") .map_io = r8a7740_map_io, - .init_early = r8a7740_init_delay, + .init_early = shmobile_init_delay, .init_irq = r8a7740_init_irq_of, .init_machine = r8a7740_generic_init, + .init_late = shmobile_init_late, .dt_compat = r8a7740_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index c4616f0698c6..a901d9ef53f6 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -185,12 +185,6 @@ void __init r8a7790_pinmux_init(void) r8a7790_register_gpio(3); r8a7790_register_gpio(4); r8a7790_register_gpio(5); - r8a7790_register_i2c(0); - r8a7790_register_i2c(1); - r8a7790_register_i2c(2); - r8a7790_register_i2c(3); - r8a7790_register_audio_dmac(0); - r8a7790_register_audio_dmac(1); } #define __R8A7790_SCIF(scif_type, _scscr, index, baseaddr, irq) \ @@ -308,6 +302,12 @@ void __init r8a7790_add_standard_devices(void) r8a7790_add_dt_devices(); r8a7790_register_irqc(0); r8a7790_register_thermal(); + r8a7790_register_i2c(0); + r8a7790_register_i2c(1); + r8a7790_register_i2c(2); + r8a7790_register_i2c(3); + r8a7790_register_audio_dmac(0); + r8a7790_register_audio_dmac(1); } void __init r8a7790_init_early(void) diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c index e28404e43860..949580ae150a 100644 --- a/arch/arm/mach-shmobile/setup-r8a7791.c +++ b/arch/arm/mach-shmobile/setup-r8a7791.c @@ -210,13 +210,6 @@ void __init r8a7791_add_standard_devices(void) r8a7791_register_thermal(); } -void __init r8a7791_init_early(void) -{ -#ifndef CONFIG_ARM_ARCH_TIMER - shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */ -#endif -} - #ifdef CONFIG_USE_OF static const char *r8a7791_boards_compat_dt[] __initdata = { "renesas,r8a7791", @@ -225,7 +218,7 @@ static const char *r8a7791_boards_compat_dt[] __initdata = { DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)") .smp = smp_ops(r8a7791_smp_ops), - .init_early = r8a7791_init_early, + .init_early = shmobile_init_delay, .init_time = rcar_gen2_timer_init, .dt_compat = r8a7791_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 10604480f325..542c5a47173f 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -30,12 +30,16 @@ u32 rcar_gen2_read_mode_pins(void) { - void __iomem *modemr = ioremap_nocache(MODEMR, 4); - u32 mode; - - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); + static u32 mode; + static bool mode_valid; + + if (!mode_valid) { + void __iomem *modemr = ioremap_nocache(MODEMR, 4); + BUG_ON(!modemr); + mode = ioread32(modemr); + iounmap(modemr); + mode_valid = true; + } return mode; } diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index f2ca92308f75..2dfd748da7f3 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -24,7 +24,6 @@ #include <linux/io.h> #include <linux/delay.h> #include <mach/common.h> -#include <mach/emev2.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c index 2df5bd190fe4..ec979529f30f 100644 --- a/arch/arm/mach-shmobile/smp-r8a7791.c +++ b/arch/arm/mach-shmobile/smp-r8a7791.c @@ -20,6 +20,7 @@ #include <asm/smp_plat.h> #include <mach/common.h> #include <mach/r8a7791.h> +#include <mach/rcar-gen2.h> #define RST 0xe6160000 #define CA15BAR 0x0020 @@ -51,9 +52,21 @@ static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus) iounmap(p); } +static int r8a7791_smp_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + /* Error out when hardware debug mode is enabled */ + if (rcar_gen2_read_mode_pins() & BIT(21)) { + pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu); + return -ENOTSUPP; + } + + return shmobile_smp_apmu_boot_secondary(cpu, idle); +} + struct smp_operations r8a7791_smp_ops __initdata = { .smp_prepare_cpus = r8a7791_smp_prepare_cpus, - .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, + .smp_boot_secondary = r8a7791_smp_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_disable = shmobile_smp_cpu_disable, .cpu_die = shmobile_smp_apmu_cpu_die, diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index 62d7052d6f21..68bc0b82226d 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -21,6 +21,24 @@ #include <linux/platform_device.h> #include <linux/clocksource.h> #include <linux/delay.h> +#include <linux/of_address.h> + +void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz, + unsigned int mult, unsigned int div) +{ + /* calculate a worst-case loops-per-jiffy value + * based on maximum cpu core hz setting and the + * __delay() implementation in arch/arm/lib/delay.S + * + * this will result in a longer delay than expected + * when the cpu core runs on lower frequencies. + */ + + unsigned int value = HZ * div / mult; + + if (!preset_lpj) + preset_lpj = max_cpu_core_hz / value; +} void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz, unsigned int mult, unsigned int div) @@ -39,6 +57,33 @@ void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz, preset_lpj = max_cpu_core_mhz * value; } +void __init shmobile_init_delay(void) +{ + struct device_node *np, *parent; + u32 max_freq, freq; + + max_freq = 0; + + parent = of_find_node_by_path("/cpus"); + if (parent) { + for_each_child_of_node(parent, np) { + if (!of_property_read_u32(np, "clock-frequency", &freq)) + max_freq = max(max_freq, freq); + } + of_node_put(parent); + } + + if (max_freq) { + if (of_find_compatible_node(NULL, NULL, "arm,cortex-a8")) + shmobile_setup_delay_hz(max_freq, 1, 3); + else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9")) + shmobile_setup_delay_hz(max_freq, 1, 3); + else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a15")) + if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) + shmobile_setup_delay_hz(max_freq, 2, 4); + } +} + static void __init shmobile_late_time_init(void) { /* diff --git a/arch/arm/mach-spear/headsmp.S b/arch/arm/mach-spear/headsmp.S index ed85473a047f..c52192dc3d9f 100644 --- a/arch/arm/mach-spear/headsmp.S +++ b/arch/arm/mach-spear/headsmp.S @@ -3,7 +3,7 @@ * * Picked from realview * Copyright (c) 2012 ST Microelectronics Limited - * Shiraz Hashim <shiraz.hashim@st.com> + * Shiraz Hashim <shiraz.linux.kernel@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c index 5c4a19887b2b..c19751fff2c6 100644 --- a/arch/arm/mach-spear/platsmp.c +++ b/arch/arm/mach-spear/platsmp.c @@ -4,7 +4,7 @@ * based upon linux/arch/arm/mach-realview/platsmp.c * * Copyright (C) 2012 ST Microelectronics Ltd. - * Shiraz Hashim <shiraz.hashim@st.com> + * Shiraz Hashim <shiraz.linux.kernel@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c index 218ba5b67d92..26fda4ed4d51 100644 --- a/arch/arm/mach-spear/time.c +++ b/arch/arm/mach-spear/time.c @@ -2,7 +2,7 @@ * arch/arm/plat-spear/time.c * * Copyright (C) 2010 ST Microelectronics - * Shiraz Hashim<shiraz.hashim@st.com> + * Shiraz Hashim<shiraz.linux.kernel@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -71,7 +71,7 @@ static void clockevent_set_mode(enum clock_event_mode mode, static int clockevent_next_event(unsigned long evt, struct clock_event_device *clk_event_dev); -static void spear_clocksource_init(void) +static void __init spear_clocksource_init(void) { u32 tick_rate; u16 val; diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c index 1217fb598cfd..df731f2322fa 100644 --- a/arch/arm/mach-sti/board-dt.c +++ b/arch/arm/mach-sti/board-dt.c @@ -36,6 +36,7 @@ static void __init stih41x_machine_init(void) static const char *stih41x_dt_match[] __initdata = { "st,stih415", "st,stih416", + "st,stih407", NULL }; diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 92d660f9610f..55b305d51669 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -70,7 +70,4 @@ config TEGRA_AHB which controls AHB bus master arbitration and some performance parameters(priority, prefech size). -config TEGRA_EMC_SCALING_ENABLE - bool "Enable scaling the memory frequency" - endmenu diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c index 788495d35cf9..30b993399ed7 100644 --- a/arch/arm/mach-vexpress/dcscb.c +++ b/arch/arm/mach-vexpress/dcscb.c @@ -51,12 +51,14 @@ static int dcscb_allcpus_mask[2]; static int dcscb_power_up(unsigned int cpu, unsigned int cluster) { unsigned int rst_hold, cpumask = (1 << cpu); - unsigned int all_mask = dcscb_allcpus_mask[cluster]; + unsigned int all_mask; pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); if (cpu >= 4 || cluster >= 2) return -EINVAL; + all_mask = dcscb_allcpus_mask[cluster]; + /* * Since this is called with IRQs enabled, and no arch_spin_lock_irq * variant exists, we need to disable IRQs manually here. @@ -101,11 +103,12 @@ static void dcscb_power_down(void) cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); cpumask = (1 << cpu); - all_mask = dcscb_allcpus_mask[cluster]; pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); BUG_ON(cpu >= 4 || cluster >= 2); + all_mask = dcscb_allcpus_mask[cluster]; + __mcpm_cpu_going_down(cpu, cluster); arch_spin_lock(&dcscb_lock); diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c index c26ef5b92ca7..2c2754e79cb3 100644 --- a/arch/arm/mach-vexpress/spc.c +++ b/arch/arm/mach-vexpress/spc.c @@ -392,7 +392,7 @@ static irqreturn_t ve_spc_irq_handler(int irq, void *data) * +--------------------------+ * | 31 20 | 19 0 | * +--------------------------+ - * | u_volt | freq(kHz) | + * | m_volt | freq(kHz) | * +--------------------------+ */ #define MULT_FACTOR 20 @@ -414,7 +414,7 @@ static int ve_spc_populate_opps(uint32_t cluster) ret = ve_spc_read_sys_cfg(SYSCFG_SCC, off, &data); if (!ret) { opps->freq = (data & FREQ_MASK) * MULT_FACTOR; - opps->u_volt = data >> VOLT_SHIFT; + opps->u_volt = (data >> VOLT_SHIFT) * 1000; } else { break; } diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index f5ad9ee70426..5bf7c3c3b301 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -420,29 +420,29 @@ config CPU_32v3 bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP - select TLS_REG_EMUL if SMP || !MMU select NEED_KUSER_HELPERS + select TLS_REG_EMUL if SMP || !MMU config CPU_32v4 bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP - select TLS_REG_EMUL if SMP || !MMU select NEED_KUSER_HELPERS + select TLS_REG_EMUL if SMP || !MMU config CPU_32v4T bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP - select TLS_REG_EMUL if SMP || !MMU select NEED_KUSER_HELPERS + select TLS_REG_EMUL if SMP || !MMU config CPU_32v5 bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP - select TLS_REG_EMUL if SMP || !MMU select NEED_KUSER_HELPERS + select TLS_REG_EMUL if SMP || !MMU config CPU_32v6 bool diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index f62aa0677e5c..6b00be1f971e 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1963,8 +1963,8 @@ arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size) mapping->nr_bitmaps = 1; mapping->extensions = extensions; mapping->base = base; - mapping->size = bitmap_size << PAGE_SHIFT; mapping->bits = BITS_PER_BYTE * bitmap_size; + mapping->size = mapping->bits << PAGE_SHIFT; spin_lock_init(&mapping->lock); diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 6816192a7561..b61a3bcc2fa8 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -597,51 +597,3 @@ void __init orion_gpio_init(struct device_node *np, orion_gpio_chip_count++; } - -#ifdef CONFIG_OF -static void __init orion_gpio_of_init_one(struct device_node *np, - int irq_gpio_base) -{ - int ngpio, gpio_base, mask_offset; - void __iomem *base; - int ret, i; - int irqs[4]; - int secondary_irq_base; - - ret = of_property_read_u32(np, "ngpio", &ngpio); - if (ret) - goto out; - ret = of_property_read_u32(np, "mask-offset", &mask_offset); - if (ret == -EINVAL) - mask_offset = 0; - else - goto out; - base = of_iomap(np, 0); - if (!base) - goto out; - - secondary_irq_base = irq_gpio_base + (32 * orion_gpio_chip_count); - gpio_base = 32 * orion_gpio_chip_count; - - /* Get the interrupt numbers. Each chip can have up to 4 - * interrupt handlers, with each handler dealing with 8 GPIO - * pins. */ - - for (i = 0; i < 4; i++) - irqs[i] = irq_of_parse_and_map(np, i); - - orion_gpio_init(np, gpio_base, ngpio, base, mask_offset, - secondary_irq_base, irqs); - return; -out: - pr_err("%s: %s: missing mandatory property\n", __func__, np->name); -} - -void __init orion_gpio_of_init(int irq_gpio_base) -{ - struct device_node *np; - - for_each_compatible_node(np, NULL, "marvell,orion-gpio") - orion_gpio_of_init_one(np, irq_gpio_base); -} -#endif diff --git a/arch/arm/plat-orion/include/plat/irq.h b/arch/arm/plat-orion/include/plat/irq.h index 50547e417936..96be19e9bd93 100644 --- a/arch/arm/plat-orion/include/plat/irq.h +++ b/arch/arm/plat-orion/include/plat/irq.h @@ -12,5 +12,4 @@ #define __PLAT_IRQ_H void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr); -void __init orion_dt_init_irq(void); #endif diff --git a/arch/arm/plat-orion/include/plat/orion-gpio.h b/arch/arm/plat-orion/include/plat/orion-gpio.h index 614dcac9dc52..e763988b04b9 100644 --- a/arch/arm/plat-orion/include/plat/orion-gpio.h +++ b/arch/arm/plat-orion/include/plat/orion-gpio.h @@ -33,5 +33,4 @@ void __init orion_gpio_init(struct device_node *np, int secondary_irq_base, int irq[4]); -void __init orion_gpio_of_init(int irq_gpio_base); #endif diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c index 807df142444b..8c1fc06007c0 100644 --- a/arch/arm/plat-orion/irq.c +++ b/arch/arm/plat-orion/irq.c @@ -20,47 +20,6 @@ #include <plat/orion-gpio.h> #include <mach/bridge-regs.h> -#ifdef CONFIG_MULTI_IRQ_HANDLER -/* - * Compiling with both non-DT and DT support enabled, will - * break asm irq handler used by non-DT boards. Therefore, - * we provide a C-style irq handler even for non-DT boards, - * if MULTI_IRQ_HANDLER is set. - * - * Notes: - * - this is prepared for Kirkwood and Dove only, update - * accordingly if you add Orion5x or MV78x00. - * - Orion5x uses different macro names and has only one - * set of CAUSE/MASK registers. - * - MV78x00 uses the same macro names but has a third - * set of CAUSE/MASK registers. - * - */ - -static void __iomem *orion_irq_base = IRQ_VIRT_BASE; - -asmlinkage void -__exception_irq_entry orion_legacy_handle_irq(struct pt_regs *regs) -{ - u32 stat; - - stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_LOW_OFF); - stat &= readl_relaxed(orion_irq_base + IRQ_MASK_LOW_OFF); - if (stat) { - unsigned int hwirq = __fls(stat); - handle_IRQ(hwirq, regs); - return; - } - stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_HIGH_OFF); - stat &= readl_relaxed(orion_irq_base + IRQ_MASK_HIGH_OFF); - if (stat) { - unsigned int hwirq = 32 + __fls(stat); - handle_IRQ(hwirq, regs); - return; - } -} -#endif - void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) { struct irq_chip_generic *gc; @@ -78,40 +37,4 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) ct->chip.irq_unmask = irq_gc_mask_set_bit; irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); - -#ifdef CONFIG_MULTI_IRQ_HANDLER - set_handle_irq(orion_legacy_handle_irq); -#endif -} - -#ifdef CONFIG_OF -static int __init orion_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - int i = 0; - void __iomem *base; - - do { - base = of_iomap(np, i); - if (base) { - orion_irq_init(i * 32, base + 0x04); - i++; - } - } while (base); - - irq_domain_add_legacy(np, i * 32, 0, 0, - &irq_domain_simple_ops, NULL); - return 0; -} - -static const struct of_device_id orion_irq_match[] = { - { .compatible = "marvell,orion-intc", - .data = orion_add_irq_domain, }, - {}, -}; - -void __init orion_dt_init_irq(void) -{ - of_irq_init(orion_irq_match); } -#endif diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c index 6cac43bd1d86..423f56dd4028 100644 --- a/arch/arm/vfp/vfpdouble.c +++ b/arch/arm/vfp/vfpdouble.c @@ -866,6 +866,8 @@ vfp_double_multiply_accumulate(int dd, int dn, int dm, u32 fpscr, u32 negate, ch vdp.sign = vfp_sign_negate(vdp.sign); vfp_double_unpack(&vdn, vfp_get_double(dd)); + if (vdn.exponent == 0 && vdn.significand) + vfp_double_normalise_denormal(&vdn); if (negate & NEG_SUBTRACT) vdn.sign = vfp_sign_negate(vdn.sign); diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c index b252631b406b..4f96c1617aae 100644 --- a/arch/arm/vfp/vfpsingle.c +++ b/arch/arm/vfp/vfpsingle.c @@ -915,6 +915,8 @@ vfp_single_multiply_accumulate(int sd, int sn, s32 m, u32 fpscr, u32 negate, cha v = vfp_get_float(sd); pr_debug("VFP: s%u = %08x\n", sd, v); vfp_single_unpack(&vsn, v); + if (vsn.exponent == 0 && vsn.significand) + vfp_single_normalise_denormal(&vsn); if (negate & NEG_SUBTRACT) vsn.sign = vfp_sign_negate(vsn.sign); diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index e6e4d3749a6e..e759af5d7098 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -323,8 +323,6 @@ menu "CPU Power Management" source "drivers/cpuidle/Kconfig" -source "kernel/power/Kconfig" - source "drivers/cpufreq/Kconfig" endmenu diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi index 93f4b2dd9248..f8c40a66e65d 100644 --- a/arch/arm64/boot/dts/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm-storm.dtsi @@ -307,6 +307,7 @@ <0x0 0x1f21e000 0x0 0x1000>, <0x0 0x1f217000 0x0 0x1000>; interrupts = <0x0 0x86 0x4>; + dma-coherent; status = "disabled"; clocks = <&sata01clk 0>; phys = <&phy1 0>; @@ -321,6 +322,7 @@ <0x0 0x1f22e000 0x0 0x1000>, <0x0 0x1f227000 0x0 0x1000>; interrupts = <0x0 0x87 0x4>; + dma-coherent; status = "ok"; clocks = <&sata23clk 0>; phys = <&phy2 0>; @@ -334,6 +336,7 @@ <0x0 0x1f23d000 0x0 0x1000>, <0x0 0x1f23e000 0x0 0x1000>; interrupts = <0x0 0x88 0x4>; + dma-coherent; status = "ok"; clocks = <&sata45clk 0>; phys = <&phy3 0>; diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h index f600d400c07d..aff0292c8f4d 100644 --- a/arch/arm64/include/asm/mmu.h +++ b/arch/arm64/include/asm/mmu.h @@ -22,6 +22,9 @@ typedef struct { void *vdso; } mm_context_t; +#define INIT_MM_CONTEXT(name) \ + .context.id_lock = __RAW_SPIN_LOCK_UNLOCKED(name.context.id_lock), + #define ASID(mm) ((mm)->context.id & 0xffff) extern void paging_init(void); diff --git a/arch/arm64/include/asm/tlb.h b/arch/arm64/include/asm/tlb.h index 72cadf52ca80..80e2c08900d6 100644 --- a/arch/arm64/include/asm/tlb.h +++ b/arch/arm64/include/asm/tlb.h @@ -19,6 +19,7 @@ #ifndef __ASM_TLB_H #define __ASM_TLB_H +#define __tlb_remove_pmd_tlb_entry __tlb_remove_pmd_tlb_entry #include <asm-generic/tlb.h> @@ -99,5 +100,10 @@ static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp, } #endif +static inline void __tlb_remove_pmd_tlb_entry(struct mmu_gather *tlb, pmd_t *pmdp, + unsigned long address) +{ + tlb_add_flush(tlb, address); +} #endif diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h index bb8eb8a78e67..c8d8fc17bd5a 100644 --- a/arch/arm64/include/asm/unistd32.h +++ b/arch/arm64/include/asm/unistd32.h @@ -403,8 +403,9 @@ __SYSCALL(378, sys_kcmp) __SYSCALL(379, sys_finit_module) __SYSCALL(380, sys_sched_setattr) __SYSCALL(381, sys_sched_getattr) +__SYSCALL(382, sys_renameat2) -#define __NR_compat_syscalls 379 +#define __NR_compat_syscalls 383 /* * Compat syscall numbers used by the AArch64 kernel. diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index ed3955a95747..a7fb874b595e 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -318,9 +318,6 @@ static int brk_handler(unsigned long addr, unsigned int esr, if (call_break_hook(regs, esr) == DBG_HOOK_HANDLED) return 0; - pr_warn("unexpected brk exception at %lx, esr=0x%x\n", - (long)instruction_pointer(regs), esr); - if (!user_mode(regs)) return -EFAULT; diff --git a/arch/arm64/kernel/early_printk.c b/arch/arm64/kernel/early_printk.c index ffbbdde7aba1..2dc36d00addf 100644 --- a/arch/arm64/kernel/early_printk.c +++ b/arch/arm64/kernel/early_printk.c @@ -143,10 +143,8 @@ static int __init setup_early_printk(char *buf) } /* no options parsing yet */ - if (paddr) { - set_fixmap_io(FIX_EARLYCON_MEM_BASE, paddr); - early_base = (void __iomem *)fix_to_virt(FIX_EARLYCON_MEM_BASE); - } + if (paddr) + early_base = (void __iomem *)set_fixmap_offset_io(FIX_EARLYCON_MEM_BASE, paddr); printch = match->printch; early_console = &early_console_dev; diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 720853f70b6b..7ec784653b29 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -393,11 +393,10 @@ void __init setup_arch(char **cmdline_p) static int __init arm64_device_init(void) { - of_clk_init(NULL); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); return 0; } -arch_initcall(arm64_device_init); +arch_initcall_sync(arm64_device_init); static DEFINE_PER_CPU(struct cpu, cpu_data); diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c index 29c39d5d77e3..6815987b50f8 100644 --- a/arch/arm64/kernel/time.c +++ b/arch/arm64/kernel/time.c @@ -33,6 +33,7 @@ #include <linux/irq.h> #include <linux/delay.h> #include <linux/clocksource.h> +#include <linux/clk-provider.h> #include <clocksource/arm_arch_timer.h> @@ -65,6 +66,7 @@ void __init time_init(void) { u32 arch_timer_rate; + of_clk_init(NULL); clocksource_of_init(); arch_timer_rate = arch_timer_get_rate(); diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index 0ba347e59f06..c851eb44dc50 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -22,8 +22,11 @@ #include <linux/slab.h> #include <linux/dma-mapping.h> #include <linux/dma-contiguous.h> +#include <linux/of.h> +#include <linux/platform_device.h> #include <linux/vmalloc.h> #include <linux/swiotlb.h> +#include <linux/amba/bus.h> #include <asm/cacheflush.h> @@ -305,17 +308,45 @@ struct dma_map_ops coherent_swiotlb_dma_ops = { }; EXPORT_SYMBOL(coherent_swiotlb_dma_ops); +static int dma_bus_notifier(struct notifier_block *nb, + unsigned long event, void *_dev) +{ + struct device *dev = _dev; + + if (event != BUS_NOTIFY_ADD_DEVICE) + return NOTIFY_DONE; + + if (of_property_read_bool(dev->of_node, "dma-coherent")) + set_dma_ops(dev, &coherent_swiotlb_dma_ops); + + return NOTIFY_OK; +} + +static struct notifier_block platform_bus_nb = { + .notifier_call = dma_bus_notifier, +}; + +static struct notifier_block amba_bus_nb = { + .notifier_call = dma_bus_notifier, +}; + extern int swiotlb_late_init_with_default_size(size_t default_size); static int __init swiotlb_late_init(void) { size_t swiotlb_size = min(SZ_64M, MAX_ORDER_NR_PAGES << PAGE_SHIFT); - dma_ops = &coherent_swiotlb_dma_ops; + /* + * These must be registered before of_platform_populate(). + */ + bus_register_notifier(&platform_bus_type, &platform_bus_nb); + bus_register_notifier(&amba_bustype, &amba_bus_nb); + + dma_ops = &noncoherent_swiotlb_dma_ops; return swiotlb_late_init_with_default_size(swiotlb_size); } -subsys_initcall(swiotlb_late_init); +arch_initcall(swiotlb_late_init); #define PREALLOC_DMA_DEBUG_ENTRIES 4096 diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index 6b7e89569a3a..0a472c41a67f 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -374,6 +374,9 @@ int kern_addr_valid(unsigned long addr) if (pmd_none(*pmd)) return 0; + if (pmd_sect(*pmd)) + return pfn_valid(pmd_pfn(*pmd)); + pte = pte_offset_kernel(pmd, addr); if (pte_none(*pte)) return 0; diff --git a/arch/hexagon/include/asm/barrier.h b/arch/hexagon/include/asm/barrier.h deleted file mode 100644 index 4e863daea25b..000000000000 --- a/arch/hexagon/include/asm/barrier.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Memory barrier definitions for the Hexagon architecture - * - * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#ifndef _ASM_BARRIER_H -#define _ASM_BARRIER_H - -#define rmb() barrier() -#define read_barrier_depends() barrier() -#define wmb() barrier() -#define mb() barrier() -#define smp_rmb() barrier() -#define smp_read_barrier_depends() barrier() -#define smp_wmb() barrier() -#define smp_mb() barrier() - -/* Set a value and use a memory barrier. Used by the scheduler somewhere. */ -#define set_mb(var, value) \ - do { var = value; mb(); } while (0) - -#endif /* _ASM_BARRIER_H */ diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h index bc5efc7c3f3f..39d64e0df1de 100644 --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -91,18 +91,9 @@ extern struct ia64_tr_entry *ia64_idtrs[NR_CPUS]; #define RR_RID_MASK 0x00000000ffffff00L #define RR_TO_RID(val) ((val >> 8) & 0xffffff) -/* - * Flush the TLB for address range START to END and, if not in fast mode, release the - * freed pages that where gathered up to this point. - */ static inline void -ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end) +ia64_tlb_flush_mmu_tlbonly(struct mmu_gather *tlb, unsigned long start, unsigned long end) { - unsigned long i; - unsigned int nr; - - if (!tlb->need_flush) - return; tlb->need_flush = 0; if (tlb->fullmm) { @@ -135,6 +126,14 @@ ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long e flush_tlb_range(&vma, ia64_thash(start), ia64_thash(end)); } +} + +static inline void +ia64_tlb_flush_mmu_free(struct mmu_gather *tlb) +{ + unsigned long i; + unsigned int nr; + /* lastly, release the freed pages */ nr = tlb->nr; @@ -144,6 +143,19 @@ ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long e free_page_and_swap_cache(tlb->pages[i]); } +/* + * Flush the TLB for address range START to END and, if not in fast mode, release the + * freed pages that where gathered up to this point. + */ +static inline void +ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end) +{ + if (!tlb->need_flush) + return; + ia64_tlb_flush_mmu_tlbonly(tlb, start, end); + ia64_tlb_flush_mmu_free(tlb); +} + static inline void __tlb_alloc_page(struct mmu_gather *tlb) { unsigned long addr = __get_free_pages(GFP_NOWAIT | __GFP_NOWARN, 0); @@ -206,6 +218,16 @@ static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) return tlb->max - tlb->nr; } +static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb) +{ + ia64_tlb_flush_mmu_tlbonly(tlb, tlb->start_addr, tlb->end_addr); +} + +static inline void tlb_flush_mmu_free(struct mmu_gather *tlb) +{ + ia64_tlb_flush_mmu_free(tlb); +} + static inline void tlb_flush_mmu(struct mmu_gather *tlb) { ia64_tlb_flush_mmu(tlb, tlb->start_addr, tlb->end_addr); diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S index e6f80fcf013b..a4acddad0c78 100644 --- a/arch/ia64/kernel/head.S +++ b/arch/ia64/kernel/head.S @@ -259,7 +259,7 @@ start_ap: * Switch into virtual mode: */ movl r16=(IA64_PSR_IT|IA64_PSR_IC|IA64_PSR_DT|IA64_PSR_RT|IA64_PSR_DFH|IA64_PSR_BN \ - |IA64_PSR_DI|IA64_PSR_AC) + |IA64_PSR_DI) ;; mov cr.ipsr=r16 movl r17=1f diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index 689ffcaa284e..18e794a57248 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -58,7 +58,7 @@ #include <asm/unistd.h> #include <asm/errno.h> -#if 1 +#if 0 # define PSR_DEFAULT_BITS psr.ac #else # define PSR_DEFAULT_BITS 0 diff --git a/arch/ia64/kvm/vmm_ivt.S b/arch/ia64/kvm/vmm_ivt.S index 24018484c6e9..397e34a63e18 100644 --- a/arch/ia64/kvm/vmm_ivt.S +++ b/arch/ia64/kvm/vmm_ivt.S @@ -64,7 +64,7 @@ #include "kvm_minstate.h" #include "vti.h" -#if 1 +#if 0 # define PSR_DEFAULT_BITS psr.ac #else # define PSR_DEFAULT_BITS 0 diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index c2bb4f896ce7..3aa5b46b2d40 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -635,7 +635,7 @@ static void octeon_irq_cpu_offline_ciu(struct irq_data *data) cpumask_clear(&new_affinity); cpumask_set_cpu(cpumask_first(cpu_online_mask), &new_affinity); } - __irq_set_affinity_locked(data, &new_affinity); + irq_set_affinity_locked(data, &new_affinity, false); } static int octeon_irq_ciu_set_affinity(struct irq_data *data, diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index e422b38d3113..9e67cdea3c74 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -29,15 +29,15 @@ void (*flush_cache_range)(struct vm_area_struct *vma, unsigned long start, void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); void (*flush_icache_range)(unsigned long start, unsigned long end); +EXPORT_SYMBOL_GPL(flush_icache_range); void (*local_flush_icache_range)(unsigned long start, unsigned long end); void (*__flush_cache_vmap)(void); void (*__flush_cache_vunmap)(void); void (*__flush_kernel_vmap_range)(unsigned long vaddr, int size); -void (*__invalidate_kernel_vmap_range)(unsigned long vaddr, int size); - EXPORT_SYMBOL_GPL(__flush_kernel_vmap_range); +void (*__invalidate_kernel_vmap_range)(unsigned long vaddr, int size); /* MIPS specific cache operations */ void (*flush_cache_sigtramp)(unsigned long addr); diff --git a/arch/parisc/include/asm/shmparam.h b/arch/parisc/include/asm/shmparam.h index 628ddc22faa8..afe1300ab667 100644 --- a/arch/parisc/include/asm/shmparam.h +++ b/arch/parisc/include/asm/shmparam.h @@ -1,8 +1,7 @@ #ifndef _ASMPARISC_SHMPARAM_H #define _ASMPARISC_SHMPARAM_H -#define __ARCH_FORCE_SHMLBA 1 - -#define SHMLBA 0x00400000 /* attach addr needs to be 4 Mb aligned */ +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ +#define SHM_COLOUR 0x00400000 /* shared mappings colouring */ #endif /* _ASMPARISC_SHMPARAM_H */ diff --git a/arch/parisc/include/uapi/asm/Kbuild b/arch/parisc/include/uapi/asm/Kbuild index a580642555b6..348356c99514 100644 --- a/arch/parisc/include/uapi/asm/Kbuild +++ b/arch/parisc/include/uapi/asm/Kbuild @@ -1,6 +1,8 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +generic-y += resource.h + header-y += bitsperlong.h header-y += byteorder.h header-y += errno.h @@ -13,7 +15,6 @@ header-y += msgbuf.h header-y += pdc.h header-y += posix_types.h header-y += ptrace.h -header-y += resource.h header-y += sembuf.h header-y += setup.h header-y += shmbuf.h diff --git a/arch/parisc/include/uapi/asm/resource.h b/arch/parisc/include/uapi/asm/resource.h deleted file mode 100644 index 8b06343b62ed..000000000000 --- a/arch/parisc/include/uapi/asm/resource.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _ASM_PARISC_RESOURCE_H -#define _ASM_PARISC_RESOURCE_H - -#define _STK_LIM_MAX 10 * _STK_LIM -#include <asm-generic/resource.h> - -#endif diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index a6ffc775a9f8..f6448c7c62b5 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -323,7 +323,8 @@ void flush_dcache_page(struct page *page) * specifically accesses it, of course) */ flush_tlb_page(mpnt, addr); - if (old_addr == 0 || (old_addr & (SHMLBA - 1)) != (addr & (SHMLBA - 1))) { + if (old_addr == 0 || (old_addr & (SHM_COLOUR - 1)) + != (addr & (SHM_COLOUR - 1))) { __flush_cache_page(mpnt, addr, page_to_phys(page)); if (old_addr) printk(KERN_ERR "INEQUIVALENT ALIASES 0x%lx and 0x%lx in file %s\n", old_addr, addr, mpnt->vm_file ? (char *)mpnt->vm_file->f_path.dentry->d_name.name : "(null)"); diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c index b7cadc4a06cd..31ffa9b55322 100644 --- a/arch/parisc/kernel/sys_parisc.c +++ b/arch/parisc/kernel/sys_parisc.c @@ -45,7 +45,7 @@ static int get_offset(unsigned int last_mmap) { - return (last_mmap & (SHMLBA-1)) >> PAGE_SHIFT; + return (last_mmap & (SHM_COLOUR-1)) >> PAGE_SHIFT; } static unsigned long shared_align_offset(unsigned int last_mmap, @@ -57,8 +57,8 @@ static unsigned long shared_align_offset(unsigned int last_mmap, static inline unsigned long COLOR_ALIGN(unsigned long addr, unsigned int last_mmap, unsigned long pgoff) { - unsigned long base = (addr+SHMLBA-1) & ~(SHMLBA-1); - unsigned long off = (SHMLBA-1) & + unsigned long base = (addr+SHM_COLOUR-1) & ~(SHM_COLOUR-1); + unsigned long off = (SHM_COLOUR-1) & (shared_align_offset(last_mmap, pgoff) << PAGE_SHIFT); return base + off; @@ -101,7 +101,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, if (flags & MAP_FIXED) { if ((flags & MAP_SHARED) && last_mmap && (addr - shared_align_offset(last_mmap, pgoff)) - & (SHMLBA - 1)) + & (SHM_COLOUR - 1)) return -EINVAL; goto found_addr; } @@ -122,7 +122,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, info.length = len; info.low_limit = mm->mmap_legacy_base; info.high_limit = mmap_upper_limit(); - info.align_mask = last_mmap ? (PAGE_MASK & (SHMLBA - 1)) : 0; + info.align_mask = last_mmap ? (PAGE_MASK & (SHM_COLOUR - 1)) : 0; info.align_offset = shared_align_offset(last_mmap, pgoff); addr = vm_unmapped_area(&info); @@ -161,7 +161,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, if (flags & MAP_FIXED) { if ((flags & MAP_SHARED) && last_mmap && (addr - shared_align_offset(last_mmap, pgoff)) - & (SHMLBA - 1)) + & (SHM_COLOUR - 1)) return -EINVAL; goto found_addr; } @@ -182,7 +182,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, info.length = len; info.low_limit = PAGE_SIZE; info.high_limit = mm->mmap_base; - info.align_mask = last_mmap ? (PAGE_MASK & (SHMLBA - 1)) : 0; + info.align_mask = last_mmap ? (PAGE_MASK & (SHM_COLOUR - 1)) : 0; info.align_offset = shared_align_offset(last_mmap, pgoff); addr = vm_unmapped_area(&info); if (!(addr & ~PAGE_MASK)) diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 80e5dd248934..83ead0ea127d 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -392,7 +392,7 @@ ENTRY_COMP(vmsplice) ENTRY_COMP(move_pages) /* 295 */ ENTRY_SAME(getcpu) - ENTRY_SAME(epoll_pwait) + ENTRY_COMP(epoll_pwait) ENTRY_COMP(statfs64) ENTRY_COMP(fstatfs64) ENTRY_COMP(kexec_load) /* 300 */ diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c index 413dc1769299..b2b441b32341 100644 --- a/arch/parisc/lib/memcpy.c +++ b/arch/parisc/lib/memcpy.c @@ -470,7 +470,7 @@ static unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len) return 0; /* if a load or store fault occured we can get the faulty addr */ - d = &__get_cpu_var(exception_data); + d = this_cpu_ptr(&exception_data); fault_addr = d->fault_addr; /* error in load or store? */ diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c index 9d08c71a967e..747550762f3c 100644 --- a/arch/parisc/mm/fault.c +++ b/arch/parisc/mm/fault.c @@ -151,7 +151,7 @@ int fixup_exception(struct pt_regs *regs) fix = search_exception_tables(regs->iaoq[0]); if (fix) { struct exception_data *d; - d = &__get_cpu_var(exception_data); + d = this_cpu_ptr(&exception_data); d->fault_ip = regs->iaoq[0]; d->fault_space = regs->isr; d->fault_addr = regs->ior; diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c index a28f02165e97..d367a0aece2a 100644 --- a/arch/powerpc/boot/main.c +++ b/arch/powerpc/boot/main.c @@ -139,18 +139,18 @@ static struct addr_range prep_initrd(struct addr_range vmlinux, void *chosen, * edit the command line passed to vmlinux (by setting /chosen/bootargs). * The buffer is put in it's own section so that tools may locate it easier. */ -static char cmdline[COMMAND_LINE_SIZE] +static char cmdline[BOOT_COMMAND_LINE_SIZE] __attribute__((__section__("__builtin_cmdline"))); static void prep_cmdline(void *chosen) { if (cmdline[0] == '\0') - getprop(chosen, "bootargs", cmdline, COMMAND_LINE_SIZE-1); + getprop(chosen, "bootargs", cmdline, BOOT_COMMAND_LINE_SIZE-1); printf("\n\rLinux/PowerPC load: %s", cmdline); /* If possible, edit the command line */ if (console_ops.edit_cmdline) - console_ops.edit_cmdline(cmdline, COMMAND_LINE_SIZE); + console_ops.edit_cmdline(cmdline, BOOT_COMMAND_LINE_SIZE); printf("\n\r"); /* Put the command line back into the devtree for the kernel */ @@ -174,7 +174,7 @@ void start(void) * built-in command line wasn't set by an external tool */ if ((loader_info.cmdline_len > 0) && (cmdline[0] == '\0')) memmove(cmdline, loader_info.cmdline, - min(loader_info.cmdline_len, COMMAND_LINE_SIZE-1)); + min(loader_info.cmdline_len, BOOT_COMMAND_LINE_SIZE-1)); if (console_ops.open && (console_ops.open() < 0)) exit(); diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h index b3218ce451bb..8aad3c55aeda 100644 --- a/arch/powerpc/boot/ops.h +++ b/arch/powerpc/boot/ops.h @@ -15,7 +15,7 @@ #include "types.h" #include "string.h" -#define COMMAND_LINE_SIZE 512 +#define BOOT_COMMAND_LINE_SIZE 2048 #define MAX_PATH_LEN 256 #define MAX_PROP_LEN 256 /* What should this be? */ diff --git a/arch/powerpc/boot/ps3.c b/arch/powerpc/boot/ps3.c index 9954d98871d0..4ec2d86d3c50 100644 --- a/arch/powerpc/boot/ps3.c +++ b/arch/powerpc/boot/ps3.c @@ -47,13 +47,13 @@ BSS_STACK(4096); * The buffer is put in it's own section so that tools may locate it easier. */ -static char cmdline[COMMAND_LINE_SIZE] +static char cmdline[BOOT_COMMAND_LINE_SIZE] __attribute__((__section__("__builtin_cmdline"))); static void prep_cmdline(void *chosen) { if (cmdline[0] == '\0') - getprop(chosen, "bootargs", cmdline, COMMAND_LINE_SIZE-1); + getprop(chosen, "bootargs", cmdline, BOOT_COMMAND_LINE_SIZE-1); else setprop_str(chosen, "bootargs", cmdline); diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index a2efdaa020b0..66ad7a74116f 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -41,14 +41,14 @@ struct opal_takeover_args { * size except the last one in the list to be as well. */ struct opal_sg_entry { - void *data; - long length; + __be64 data; + __be64 length; }; -/* sg list */ +/* SG list */ struct opal_sg_list { - unsigned long num_entries; - struct opal_sg_list *next; + __be64 length; + __be64 next; struct opal_sg_entry entry[]; }; @@ -858,8 +858,8 @@ int64_t opal_lpc_write(uint32_t chip_id, enum OpalLPCAddressType addr_type, int64_t opal_lpc_read(uint32_t chip_id, enum OpalLPCAddressType addr_type, uint32_t addr, __be32 *data, uint32_t sz); -int64_t opal_read_elog(uint64_t buffer, size_t size, uint64_t log_id); -int64_t opal_get_elog_size(uint64_t *log_id, size_t *size, uint64_t *elog_type); +int64_t opal_read_elog(uint64_t buffer, uint64_t size, uint64_t log_id); +int64_t opal_get_elog_size(__be64 *log_id, __be64 *size, __be64 *elog_type); int64_t opal_write_elog(uint64_t buffer, uint64_t size, uint64_t offset); int64_t opal_send_ack_elog(uint64_t log_id); void opal_resend_pending_logs(void); @@ -868,23 +868,24 @@ int64_t opal_validate_flash(uint64_t buffer, uint32_t *size, uint32_t *result); int64_t opal_manage_flash(uint8_t op); int64_t opal_update_flash(uint64_t blk_list); int64_t opal_dump_init(uint8_t dump_type); -int64_t opal_dump_info(uint32_t *dump_id, uint32_t *dump_size); -int64_t opal_dump_info2(uint32_t *dump_id, uint32_t *dump_size, uint32_t *dump_type); +int64_t opal_dump_info(__be32 *dump_id, __be32 *dump_size); +int64_t opal_dump_info2(__be32 *dump_id, __be32 *dump_size, __be32 *dump_type); int64_t opal_dump_read(uint32_t dump_id, uint64_t buffer); int64_t opal_dump_ack(uint32_t dump_id); int64_t opal_dump_resend_notification(void); -int64_t opal_get_msg(uint64_t buffer, size_t size); -int64_t opal_check_completion(uint64_t buffer, size_t size, uint64_t token); +int64_t opal_get_msg(uint64_t buffer, uint64_t size); +int64_t opal_check_completion(uint64_t buffer, uint64_t size, uint64_t token); int64_t opal_sync_host_reboot(void); int64_t opal_get_param(uint64_t token, uint32_t param_id, uint64_t buffer, - size_t length); + uint64_t length); int64_t opal_set_param(uint64_t token, uint32_t param_id, uint64_t buffer, - size_t length); + uint64_t length); int64_t opal_sensor_read(uint32_t sensor_hndl, int token, __be32 *sensor_data); /* Internal functions */ -extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data); +extern int early_init_dt_scan_opal(unsigned long node, const char *uname, + int depth, void *data); extern int early_init_dt_scan_recoverable_ranges(unsigned long node, const char *uname, int depth, void *data); @@ -893,10 +894,6 @@ extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len); extern void hvc_opal_init_early(void); -/* Internal functions */ -extern int early_init_dt_scan_opal(unsigned long node, const char *uname, - int depth, void *data); - extern int opal_notifier_register(struct notifier_block *nb); extern int opal_notifier_unregister(struct notifier_block *nb); @@ -906,9 +903,6 @@ extern void opal_notifier_enable(void); extern void opal_notifier_disable(void); extern void opal_notifier_update_evt(uint64_t evt_mask, uint64_t evt_val); -extern int opal_get_chars(uint32_t vtermno, char *buf, int count); -extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len); - extern int __opal_async_get_token(void); extern int opal_async_get_token_interruptible(void); extern int __opal_async_release_token(int token); @@ -916,8 +910,6 @@ extern int opal_async_release_token(int token); extern int opal_async_wait_response(uint64_t token, struct opal_msg *msg); extern int opal_get_sensor_data(u32 sensor_hndl, u32 *sensor_data); -extern void hvc_opal_init_early(void); - struct rtc_time; extern int opal_set_rtc_time(struct rtc_time *tm); extern void opal_get_rtc_time(struct rtc_time *tm); @@ -937,6 +929,10 @@ extern int opal_resync_timebase(void); extern void opal_lpc_init(void); +struct opal_sg_list *opal_vmalloc_to_sg_list(void *vmalloc_addr, + unsigned long vmalloc_size); +void opal_free_sg_list(struct opal_sg_list *sg); + #endif /* __ASSEMBLY__ */ #endif /* __OPAL_H */ diff --git a/arch/powerpc/include/uapi/asm/setup.h b/arch/powerpc/include/uapi/asm/setup.h index 552df83f1a49..ae3fb68cb28e 100644 --- a/arch/powerpc/include/uapi/asm/setup.h +++ b/arch/powerpc/include/uapi/asm/setup.h @@ -1 +1,6 @@ -#include <asm-generic/setup.h> +#ifndef _UAPI_ASM_POWERPC_SETUP_H +#define _UAPI_ASM_POWERPC_SETUP_H + +#define COMMAND_LINE_SIZE 2048 + +#endif /* _UAPI_ASM_POWERPC_SETUP_H */ diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 2a4779091a58..155013da27e0 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -208,7 +208,7 @@ long sys_pciconfig_iobase(long which, unsigned long in_bus, unsigned long in_devfn) { struct pci_controller* hose; - struct pci_bus *bus = NULL; + struct pci_bus *tmp_bus, *bus = NULL; struct device_node *hose_node; /* Argh ! Please forgive me for that hack, but that's the @@ -229,10 +229,12 @@ long sys_pciconfig_iobase(long which, unsigned long in_bus, * used on pre-domains setup. We return the first match */ - list_for_each_entry(bus, &pci_root_buses, node) { - if (in_bus >= bus->number && in_bus <= bus->busn_res.end) + list_for_each_entry(tmp_bus, &pci_root_buses, node) { + if (in_bus >= tmp_bus->number && + in_bus <= tmp_bus->busn_res.end) { + bus = tmp_bus; break; - bus = NULL; + } } if (bus == NULL || bus->dev.of_node == NULL) return -ENODEV; diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 3bd77edd7610..450850a49dce 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -120,6 +120,7 @@ EXPORT_SYMBOL(giveup_spe); EXPORT_SYMBOL(flush_instruction_cache); #endif EXPORT_SYMBOL(flush_dcache_range); +EXPORT_SYMBOL(flush_icache_range); #ifdef CONFIG_SMP #ifdef CONFIG_PPC32 diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index 2f3cdb01506d..658e89d2025b 100644 --- a/arch/powerpc/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -705,7 +705,7 @@ static int __init rtas_flash_init(void) if (rtas_token("ibm,update-flash-64-and-reboot") == RTAS_UNKNOWN_SERVICE) { pr_info("rtas_flash: no firmware flash support\n"); - return 1; + return -EINVAL; } rtas_validate_flash_data.buf = kzalloc(VALIDATE_BUF_SIZE, GFP_KERNEL); diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index ffbb871c2bd8..b031f932c0cc 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -242,6 +242,12 @@ kvm_novcpu_exit: */ .globl kvm_start_guest kvm_start_guest: + + /* Set runlatch bit the minute you wake up from nap */ + mfspr r1, SPRN_CTRLF + ori r1, r1, 1 + mtspr SPRN_CTRLT, r1 + ld r2,PACATOC(r13) li r0,KVM_HWTHREAD_IN_KVM @@ -309,6 +315,11 @@ kvm_no_guest: li r0, KVM_HWTHREAD_IN_NAP stb r0, HSTATE_HWTHREAD_STATE(r13) kvm_do_nap: + /* Clear the runlatch bit before napping */ + mfspr r2, SPRN_CTRLF + clrrdi r2, r2, 1 + mtspr SPRN_CTRLT, r2 + li r3, LPCR_PECE0 mfspr r4, SPRN_LPCR rlwimi r4, r3, 0, LPCR_PECE0 | LPCR_PECE1 @@ -1999,8 +2010,13 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206) /* * Take a nap until a decrementer or external or doobell interrupt - * occurs, with PECE1, PECE0 and PECEDP set in LPCR + * occurs, with PECE1, PECE0 and PECEDP set in LPCR. Also clear the + * runlatch bit before napping. */ + mfspr r2, SPRN_CTRLF + clrrdi r2, r2, 1 + mtspr SPRN_CTRLT, r2 + li r0,1 stb r0,HSTATE_HWTHREAD_REQ(r13) mfspr r5,SPRN_LPCR diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c index 3ea26c25590b..cf1d325eae8b 100644 --- a/arch/powerpc/mm/hash_native_64.c +++ b/arch/powerpc/mm/hash_native_64.c @@ -82,17 +82,14 @@ static inline void __tlbie(unsigned long vpn, int psize, int apsize, int ssize) va &= ~((1ul << mmu_psize_defs[apsize].shift) - 1); va |= penc << 12; va |= ssize << 8; - /* Add AVAL part */ - if (psize != apsize) { - /* - * MPSS, 64K base page size and 16MB parge page size - * We don't need all the bits, but rest of the bits - * must be ignored by the processor. - * vpn cover upto 65 bits of va. (0...65) and we need - * 58..64 bits of va. - */ - va |= (vpn & 0xfe); - } + /* + * AVAL bits: + * We don't need all the bits, but rest of the bits + * must be ignored by the processor. + * vpn cover upto 65 bits of va. (0...65) and we need + * 58..64 bits of va. + */ + va |= (vpn & 0xfe); /* AVAL */ va |= 1; /* L */ asm volatile(ASM_FTR_IFCLR("tlbie %0,1", PPC_TLBIE(%1,%0), %2) : : "r" (va), "r"(0), "i" (CPU_FTR_ARCH_206) @@ -133,17 +130,14 @@ static inline void __tlbiel(unsigned long vpn, int psize, int apsize, int ssize) va &= ~((1ul << mmu_psize_defs[apsize].shift) - 1); va |= penc << 12; va |= ssize << 8; - /* Add AVAL part */ - if (psize != apsize) { - /* - * MPSS, 64K base page size and 16MB parge page size - * We don't need all the bits, but rest of the bits - * must be ignored by the processor. - * vpn cover upto 65 bits of va. (0...65) and we need - * 58..64 bits of va. - */ - va |= (vpn & 0xfe); - } + /* + * AVAL bits: + * We don't need all the bits, but rest of the bits + * must be ignored by the processor. + * vpn cover upto 65 bits of va. (0...65) and we need + * 58..64 bits of va. + */ + va |= (vpn & 0xfe); va |= 1; /* L */ asm volatile(".long 0x7c000224 | (%0 << 11) | (1 << 21)" : : "r"(va) : "memory"); diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 4ebbb9e99286..3b181b22cd46 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -232,6 +232,7 @@ int __node_distance(int a, int b) return distance; } +EXPORT_SYMBOL(__node_distance); static void initialize_distance_lookup_table(int nid, const __be32 *associativity) diff --git a/arch/powerpc/perf/hv-24x7.c b/arch/powerpc/perf/hv-24x7.c index 297c91051413..e0766b82e165 100644 --- a/arch/powerpc/perf/hv-24x7.c +++ b/arch/powerpc/perf/hv-24x7.c @@ -155,16 +155,28 @@ static ssize_t read_offset_data(void *dest, size_t dest_len, return copy_len; } -static unsigned long h_get_24x7_catalog_page(char page[static 4096], - u32 version, u32 index) +static unsigned long h_get_24x7_catalog_page_(unsigned long phys_4096, + unsigned long version, + unsigned long index) { - WARN_ON(!IS_ALIGNED((unsigned long)page, 4096)); + pr_devel("h_get_24x7_catalog_page(0x%lx, %lu, %lu)", + phys_4096, + version, + index); + WARN_ON(!IS_ALIGNED(phys_4096, 4096)); return plpar_hcall_norets(H_GET_24X7_CATALOG_PAGE, - virt_to_phys(page), + phys_4096, version, index); } +static unsigned long h_get_24x7_catalog_page(char page[], + u64 version, u32 index) +{ + return h_get_24x7_catalog_page_(virt_to_phys(page), + version, index); +} + static ssize_t catalog_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t offset, size_t count) @@ -173,7 +185,7 @@ static ssize_t catalog_read(struct file *filp, struct kobject *kobj, ssize_t ret = 0; size_t catalog_len = 0, catalog_page_len = 0, page_count = 0; loff_t page_offset = 0; - uint32_t catalog_version_num = 0; + uint64_t catalog_version_num = 0; void *page = kmem_cache_alloc(hv_page_cache, GFP_USER); struct hv_24x7_catalog_page_0 *page_0 = page; if (!page) @@ -185,7 +197,7 @@ static ssize_t catalog_read(struct file *filp, struct kobject *kobj, goto e_free; } - catalog_version_num = be32_to_cpu(page_0->version); + catalog_version_num = be64_to_cpu(page_0->version); catalog_page_len = be32_to_cpu(page_0->length); catalog_len = catalog_page_len * 4096; @@ -208,8 +220,9 @@ static ssize_t catalog_read(struct file *filp, struct kobject *kobj, page, 4096, page_offset * 4096); e_free: if (hret) - pr_err("h_get_24x7_catalog_page(ver=%d, page=%lld) failed: rc=%ld\n", - catalog_version_num, page_offset, hret); + pr_err("h_get_24x7_catalog_page(ver=%lld, page=%lld) failed:" + " rc=%ld\n", + catalog_version_num, page_offset, hret); kfree(page); pr_devel("catalog_read: offset=%lld(%lld) count=%zu(%zu) catalog_len=%zu(%zu) => %zd\n", @@ -243,7 +256,7 @@ e_free: \ static DEVICE_ATTR_RO(_name) PAGE_0_ATTR(catalog_version, "%lld\n", - (unsigned long long)be32_to_cpu(page_0->version)); + (unsigned long long)be64_to_cpu(page_0->version)); PAGE_0_ATTR(catalog_len, "%lld\n", (unsigned long long)be32_to_cpu(page_0->length) * 4096); static BIN_ATTR_RO(catalog, 0/* real length varies */); @@ -485,13 +498,13 @@ static int hv_24x7_init(void) struct hv_perf_caps caps; if (!firmware_has_feature(FW_FEATURE_LPAR)) { - pr_info("not a virtualized system, not enabling\n"); + pr_debug("not a virtualized system, not enabling\n"); return -ENODEV; } hret = hv_perf_caps_get(&caps); if (hret) { - pr_info("could not obtain capabilities, error 0x%80lx, not enabling\n", + pr_debug("could not obtain capabilities, not enabling, rc=%ld\n", hret); return -ENODEV; } diff --git a/arch/powerpc/perf/hv-gpci.c b/arch/powerpc/perf/hv-gpci.c index 278ba7b9c2b5..c9d399a2df82 100644 --- a/arch/powerpc/perf/hv-gpci.c +++ b/arch/powerpc/perf/hv-gpci.c @@ -78,7 +78,7 @@ static ssize_t kernel_version_show(struct device *dev, return sprintf(page, "0x%x\n", COUNTER_INFO_VERSION_CURRENT); } -DEVICE_ATTR_RO(kernel_version); +static DEVICE_ATTR_RO(kernel_version); HV_CAPS_ATTR(version, "0x%x\n"); HV_CAPS_ATTR(ga, "%d\n"); HV_CAPS_ATTR(expanded, "%d\n"); @@ -273,13 +273,13 @@ static int hv_gpci_init(void) struct hv_perf_caps caps; if (!firmware_has_feature(FW_FEATURE_LPAR)) { - pr_info("not a virtualized system, not enabling\n"); + pr_debug("not a virtualized system, not enabling\n"); return -ENODEV; } hret = hv_perf_caps_get(&caps); if (hret) { - pr_info("could not obtain capabilities, error 0x%80lx, not enabling\n", + pr_debug("could not obtain capabilities, not enabling, rc=%ld\n", hret); return -ENODEV; } diff --git a/arch/powerpc/platforms/powernv/opal-dump.c b/arch/powerpc/platforms/powernv/opal-dump.c index b9827b0d87e4..788a1977b9a5 100644 --- a/arch/powerpc/platforms/powernv/opal-dump.c +++ b/arch/powerpc/platforms/powernv/opal-dump.c @@ -209,89 +209,20 @@ static struct kobj_type dump_ktype = { .default_attrs = dump_default_attrs, }; -static void free_dump_sg_list(struct opal_sg_list *list) -{ - struct opal_sg_list *sg1; - while (list) { - sg1 = list->next; - kfree(list); - list = sg1; - } - list = NULL; -} - -static struct opal_sg_list *dump_data_to_sglist(struct dump_obj *dump) -{ - struct opal_sg_list *sg1, *list = NULL; - void *addr; - int64_t size; - - addr = dump->buffer; - size = dump->size; - - sg1 = kzalloc(PAGE_SIZE, GFP_KERNEL); - if (!sg1) - goto nomem; - - list = sg1; - sg1->num_entries = 0; - while (size > 0) { - /* Translate virtual address to physical address */ - sg1->entry[sg1->num_entries].data = - (void *)(vmalloc_to_pfn(addr) << PAGE_SHIFT); - - if (size > PAGE_SIZE) - sg1->entry[sg1->num_entries].length = PAGE_SIZE; - else - sg1->entry[sg1->num_entries].length = size; - - sg1->num_entries++; - if (sg1->num_entries >= SG_ENTRIES_PER_NODE) { - sg1->next = kzalloc(PAGE_SIZE, GFP_KERNEL); - if (!sg1->next) - goto nomem; - - sg1 = sg1->next; - sg1->num_entries = 0; - } - addr += PAGE_SIZE; - size -= PAGE_SIZE; - } - return list; - -nomem: - pr_err("%s : Failed to allocate memory\n", __func__); - free_dump_sg_list(list); - return NULL; -} - -static void sglist_to_phy_addr(struct opal_sg_list *list) -{ - struct opal_sg_list *sg, *next; - - for (sg = list; sg; sg = next) { - next = sg->next; - /* Don't translate NULL pointer for last entry */ - if (sg->next) - sg->next = (struct opal_sg_list *)__pa(sg->next); - else - sg->next = NULL; - - /* Convert num_entries to length */ - sg->num_entries = - sg->num_entries * sizeof(struct opal_sg_entry) + 16; - } -} - -static int64_t dump_read_info(uint32_t *id, uint32_t *size, uint32_t *type) +static int64_t dump_read_info(uint32_t *dump_id, uint32_t *dump_size, uint32_t *dump_type) { + __be32 id, size, type; int rc; - *type = 0xffffffff; - rc = opal_dump_info2(id, size, type); + type = cpu_to_be32(0xffffffff); + rc = opal_dump_info2(&id, &size, &type); if (rc == OPAL_PARAMETER) - rc = opal_dump_info(id, size); + rc = opal_dump_info(&id, &size); + + *dump_id = be32_to_cpu(id); + *dump_size = be32_to_cpu(size); + *dump_type = be32_to_cpu(type); if (rc) pr_warn("%s: Failed to get dump info (%d)\n", @@ -314,15 +245,12 @@ static int64_t dump_read_data(struct dump_obj *dump) } /* Generate SG list */ - list = dump_data_to_sglist(dump); + list = opal_vmalloc_to_sg_list(dump->buffer, dump->size); if (!list) { rc = -ENOMEM; goto out; } - /* Translate sg list addr to real address */ - sglist_to_phy_addr(list); - /* First entry address */ addr = __pa(list); @@ -341,7 +269,7 @@ static int64_t dump_read_data(struct dump_obj *dump) __func__, dump->id); /* Free SG list */ - free_dump_sg_list(list); + opal_free_sg_list(list); out: return rc; diff --git a/arch/powerpc/platforms/powernv/opal-elog.c b/arch/powerpc/platforms/powernv/opal-elog.c index ef7bc2a97862..10268c41d830 100644 --- a/arch/powerpc/platforms/powernv/opal-elog.c +++ b/arch/powerpc/platforms/powernv/opal-elog.c @@ -238,18 +238,25 @@ static struct elog_obj *create_elog_obj(uint64_t id, size_t size, uint64_t type) static void elog_work_fn(struct work_struct *work) { - size_t elog_size; + __be64 size; + __be64 id; + __be64 type; + uint64_t elog_size; uint64_t log_id; uint64_t elog_type; int rc; char name[2+16+1]; - rc = opal_get_elog_size(&log_id, &elog_size, &elog_type); + rc = opal_get_elog_size(&id, &size, &type); if (rc != OPAL_SUCCESS) { pr_err("ELOG: Opal log read failed\n"); return; } + elog_size = be64_to_cpu(size); + log_id = be64_to_cpu(id); + elog_type = be64_to_cpu(type); + BUG_ON(elog_size > OPAL_MAX_ERRLOG_SIZE); if (elog_size >= OPAL_MAX_ERRLOG_SIZE) diff --git a/arch/powerpc/platforms/powernv/opal-flash.c b/arch/powerpc/platforms/powernv/opal-flash.c index 714ef972406b..dc487ff04704 100644 --- a/arch/powerpc/platforms/powernv/opal-flash.c +++ b/arch/powerpc/platforms/powernv/opal-flash.c @@ -79,9 +79,6 @@ /* XXX: Assume candidate image size is <= 1GB */ #define MAX_IMAGE_SIZE 0x40000000 -/* Flash sg list version */ -#define SG_LIST_VERSION (1UL) - /* Image status */ enum { IMAGE_INVALID, @@ -131,11 +128,15 @@ static DEFINE_MUTEX(image_data_mutex); */ static inline void opal_flash_validate(void) { - struct validate_flash_t *args_buf = &validate_flash_data; + long ret; + void *buf = validate_flash_data.buf; + __be32 size, result; - args_buf->status = opal_validate_flash(__pa(args_buf->buf), - &(args_buf->buf_size), - &(args_buf->result)); + ret = opal_validate_flash(__pa(buf), &size, &result); + + validate_flash_data.status = ret; + validate_flash_data.buf_size = be32_to_cpu(size); + validate_flash_data.result = be32_to_cpu(result); } /* @@ -268,93 +269,11 @@ static ssize_t manage_store(struct kobject *kobj, } /* - * Free sg list - */ -static void free_sg_list(struct opal_sg_list *list) -{ - struct opal_sg_list *sg1; - while (list) { - sg1 = list->next; - kfree(list); - list = sg1; - } - list = NULL; -} - -/* - * Build candidate image scatter gather list - * - * list format: - * ----------------------------------- - * | VER (8) | Entry length in bytes | - * ----------------------------------- - * | Pointer to next entry | - * ----------------------------------- - * | Address of memory area 1 | - * ----------------------------------- - * | Length of memory area 1 | - * ----------------------------------- - * | ......... | - * ----------------------------------- - * | ......... | - * ----------------------------------- - * | Address of memory area N | - * ----------------------------------- - * | Length of memory area N | - * ----------------------------------- - */ -static struct opal_sg_list *image_data_to_sglist(void) -{ - struct opal_sg_list *sg1, *list = NULL; - void *addr; - int size; - - addr = image_data.data; - size = image_data.size; - - sg1 = kzalloc(PAGE_SIZE, GFP_KERNEL); - if (!sg1) - return NULL; - - list = sg1; - sg1->num_entries = 0; - while (size > 0) { - /* Translate virtual address to physical address */ - sg1->entry[sg1->num_entries].data = - (void *)(vmalloc_to_pfn(addr) << PAGE_SHIFT); - - if (size > PAGE_SIZE) - sg1->entry[sg1->num_entries].length = PAGE_SIZE; - else - sg1->entry[sg1->num_entries].length = size; - - sg1->num_entries++; - if (sg1->num_entries >= SG_ENTRIES_PER_NODE) { - sg1->next = kzalloc(PAGE_SIZE, GFP_KERNEL); - if (!sg1->next) { - pr_err("%s : Failed to allocate memory\n", - __func__); - goto nomem; - } - - sg1 = sg1->next; - sg1->num_entries = 0; - } - addr += PAGE_SIZE; - size -= PAGE_SIZE; - } - return list; -nomem: - free_sg_list(list); - return NULL; -} - -/* * OPAL update flash */ static int opal_flash_update(int op) { - struct opal_sg_list *sg, *list, *next; + struct opal_sg_list *list; unsigned long addr; int64_t rc = OPAL_PARAMETER; @@ -364,30 +283,13 @@ static int opal_flash_update(int op) goto flash; } - list = image_data_to_sglist(); + list = opal_vmalloc_to_sg_list(image_data.data, image_data.size); if (!list) goto invalid_img; /* First entry address */ addr = __pa(list); - /* Translate sg list address to absolute */ - for (sg = list; sg; sg = next) { - next = sg->next; - /* Don't translate NULL pointer for last entry */ - if (sg->next) - sg->next = (struct opal_sg_list *)__pa(sg->next); - else - sg->next = NULL; - - /* - * Convert num_entries to version/length format - * to satisfy OPAL. - */ - sg->num_entries = (SG_LIST_VERSION << 56) | - (sg->num_entries * sizeof(struct opal_sg_entry) + 16); - } - pr_alert("FLASH: Image is %u bytes\n", image_data.size); pr_alert("FLASH: Image update requested\n"); pr_alert("FLASH: Image will be updated during system reboot\n"); diff --git a/arch/powerpc/platforms/powernv/opal-sysparam.c b/arch/powerpc/platforms/powernv/opal-sysparam.c index 6b614726baf2..d202f9bc3683 100644 --- a/arch/powerpc/platforms/powernv/opal-sysparam.c +++ b/arch/powerpc/platforms/powernv/opal-sysparam.c @@ -39,10 +39,11 @@ struct param_attr { struct kobj_attribute kobj_attr; }; -static int opal_get_sys_param(u32 param_id, u32 length, void *buffer) +static ssize_t opal_get_sys_param(u32 param_id, u32 length, void *buffer) { struct opal_msg msg; - int ret, token; + ssize_t ret; + int token; token = opal_async_get_token_interruptible(); if (token < 0) { @@ -59,7 +60,7 @@ static int opal_get_sys_param(u32 param_id, u32 length, void *buffer) ret = opal_async_wait_response(token, &msg); if (ret) { - pr_err("%s: Failed to wait for the async response, %d\n", + pr_err("%s: Failed to wait for the async response, %zd\n", __func__, ret); goto out_token; } @@ -111,7 +112,7 @@ static ssize_t sys_param_show(struct kobject *kobj, { struct param_attr *attr = container_of(kobj_attr, struct param_attr, kobj_attr); - int ret; + ssize_t ret; mutex_lock(&opal_sysparam_mutex); ret = opal_get_sys_param(attr->param_id, attr->param_size, @@ -121,9 +122,10 @@ static ssize_t sys_param_show(struct kobject *kobj, memcpy(buf, param_data_buf, attr->param_size); + ret = attr->param_size; out: mutex_unlock(&opal_sysparam_mutex); - return ret ? ret : attr->param_size; + return ret; } static ssize_t sys_param_store(struct kobject *kobj, @@ -131,14 +133,20 @@ static ssize_t sys_param_store(struct kobject *kobj, { struct param_attr *attr = container_of(kobj_attr, struct param_attr, kobj_attr); - int ret; + ssize_t ret; + + /* MAX_PARAM_DATA_LEN is sizeof(param_data_buf) */ + if (count > MAX_PARAM_DATA_LEN) + count = MAX_PARAM_DATA_LEN; mutex_lock(&opal_sysparam_mutex); memcpy(param_data_buf, buf, count); ret = opal_set_sys_param(attr->param_id, attr->param_size, param_data_buf); mutex_unlock(&opal_sysparam_mutex); - return ret ? ret : count; + if (!ret) + ret = count; + return ret; } void __init opal_sys_param_init(void) @@ -214,13 +222,13 @@ void __init opal_sys_param_init(void) } if (of_property_read_u32_array(sysparam, "param-len", size, count)) { - pr_err("SYSPARAM: Missing propery param-len in the DT\n"); + pr_err("SYSPARAM: Missing property param-len in the DT\n"); goto out_free_perm; } if (of_property_read_u8_array(sysparam, "param-perm", perm, count)) { - pr_err("SYSPARAM: Missing propery param-perm in the DT\n"); + pr_err("SYSPARAM: Missing property param-perm in the DT\n"); goto out_free_perm; } @@ -233,6 +241,12 @@ void __init opal_sys_param_init(void) /* For each of the parameters, populate the parameter attributes */ for (i = 0; i < count; i++) { + if (size[i] > MAX_PARAM_DATA_LEN) { + pr_warn("SYSPARAM: Not creating parameter %d as size " + "exceeds buffer length\n", i); + continue; + } + sysfs_attr_init(&attr[i].kobj_attr.attr); attr[i].param_id = id[i]; attr[i].param_size = size[i]; diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index 49d2f00019e5..360ad80c754c 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -242,14 +242,14 @@ void opal_notifier_update_evt(uint64_t evt_mask, void opal_notifier_enable(void) { int64_t rc; - uint64_t evt = 0; + __be64 evt = 0; atomic_set(&opal_notifier_hold, 0); /* Process pending events */ rc = opal_poll_events(&evt); if (rc == OPAL_SUCCESS && evt) - opal_do_notifier(evt); + opal_do_notifier(be64_to_cpu(evt)); } void opal_notifier_disable(void) @@ -529,7 +529,7 @@ static irqreturn_t opal_interrupt(int irq, void *data) opal_handle_interrupt(virq_to_hw(irq), &events); - opal_do_notifier(events); + opal_do_notifier(be64_to_cpu(events)); return IRQ_HANDLED; } @@ -638,3 +638,66 @@ void opal_shutdown(void) /* Export this so that test modules can use it */ EXPORT_SYMBOL_GPL(opal_invalid_call); + +/* Convert a region of vmalloc memory to an opal sg list */ +struct opal_sg_list *opal_vmalloc_to_sg_list(void *vmalloc_addr, + unsigned long vmalloc_size) +{ + struct opal_sg_list *sg, *first = NULL; + unsigned long i = 0; + + sg = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!sg) + goto nomem; + + first = sg; + + while (vmalloc_size > 0) { + uint64_t data = vmalloc_to_pfn(vmalloc_addr) << PAGE_SHIFT; + uint64_t length = min(vmalloc_size, PAGE_SIZE); + + sg->entry[i].data = cpu_to_be64(data); + sg->entry[i].length = cpu_to_be64(length); + i++; + + if (i >= SG_ENTRIES_PER_NODE) { + struct opal_sg_list *next; + + next = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!next) + goto nomem; + + sg->length = cpu_to_be64( + i * sizeof(struct opal_sg_entry) + 16); + i = 0; + sg->next = cpu_to_be64(__pa(next)); + sg = next; + } + + vmalloc_addr += length; + vmalloc_size -= length; + } + + sg->length = cpu_to_be64(i * sizeof(struct opal_sg_entry) + 16); + + return first; + +nomem: + pr_err("%s : Failed to allocate memory\n", __func__); + opal_free_sg_list(first); + return NULL; +} + +void opal_free_sg_list(struct opal_sg_list *sg) +{ + while (sg) { + uint64_t next = be64_to_cpu(sg->next); + + kfree(sg); + + if (next) + sg = __va(next); + else + sg = NULL; + } +} diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 3b2b4fb3585b..98824aa99173 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -343,7 +343,6 @@ static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe) pci_name(dev)); continue; } - pci_dev_get(dev); pdn->pcidev = dev; pdn->pe_number = pe->pe_number; pe->dma_weight += pnv_ioda_dma_weight(dev); @@ -462,7 +461,7 @@ static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev pe = &phb->ioda.pe_array[pdn->pe_number]; WARN_ON(get_dma_ops(&pdev->dev) != &dma_iommu_ops); - set_iommu_table_base_and_group(&pdev->dev, &pe->tce32_table); + set_iommu_table_base(&pdev->dev, &pe->tce32_table); } static int pnv_pci_ioda_dma_set_mask(struct pnv_phb *phb, diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index 61cf8fa9c61b..8723d32632f5 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -162,18 +162,62 @@ static void pnv_shutdown(void) } #ifdef CONFIG_KEXEC +static void pnv_kexec_wait_secondaries_down(void) +{ + int my_cpu, i, notified = -1; + + my_cpu = get_cpu(); + + for_each_online_cpu(i) { + uint8_t status; + int64_t rc; + + if (i == my_cpu) + continue; + + for (;;) { + rc = opal_query_cpu_status(get_hard_smp_processor_id(i), + &status); + if (rc != OPAL_SUCCESS || status != OPAL_THREAD_STARTED) + break; + barrier(); + if (i != notified) { + printk(KERN_INFO "kexec: waiting for cpu %d " + "(physical %d) to enter OPAL\n", + i, paca[i].hw_cpu_id); + notified = i; + } + } + } +} + static void pnv_kexec_cpu_down(int crash_shutdown, int secondary) { xics_kexec_teardown_cpu(secondary); - /* Return secondary CPUs to firmware on OPAL v3 */ - if (firmware_has_feature(FW_FEATURE_OPALv3) && secondary) { + /* On OPAL v3, we return all CPUs to firmware */ + + if (!firmware_has_feature(FW_FEATURE_OPALv3)) + return; + + if (secondary) { + /* Return secondary CPUs to firmware on OPAL v3 */ mb(); get_paca()->kexec_state = KEXEC_STATE_REAL_MODE; mb(); /* Return the CPU to OPAL */ opal_return_cpu(); + } else if (crash_shutdown) { + /* + * On crash, we don't wait for secondaries to go + * down as they might be unreachable or hung, so + * instead we just wait a bit and move on. + */ + mdelay(1); + } else { + /* Primary waits for the secondaries to have reached OPAL */ + pnv_kexec_wait_secondaries_down(); } } #endif /* CONFIG_KEXEC */ diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c index 908672bdcea6..bf5fcd452168 100644 --- a/arch/powerpc/platforms/powernv/smp.c +++ b/arch/powerpc/platforms/powernv/smp.c @@ -30,6 +30,7 @@ #include <asm/cputhreads.h> #include <asm/xics.h> #include <asm/opal.h> +#include <asm/runlatch.h> #include "powernv.h" @@ -156,7 +157,9 @@ static void pnv_smp_cpu_kill_self(void) */ mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1); while (!generic_check_cpu_restart(cpu)) { + ppc64_runlatch_off(); power7_nap(); + ppc64_runlatch_on(); if (!generic_check_cpu_restart(cpu)) { DBG("CPU%d Unexpected exit while offline !\n", cpu); /* We may be getting an IPI, so we re-enable diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index 9b8e05078a63..20d62975856f 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -88,13 +88,14 @@ void set_default_offline_state(int cpu) static void rtas_stop_self(void) { - struct rtas_args args = { - .token = cpu_to_be32(rtas_stop_self_token), + static struct rtas_args args = { .nargs = 0, .nret = 1, .rets = &args.args[0], }; + args.token = cpu_to_be32(rtas_stop_self_token); + local_irq_disable(); BUG_ON(rtas_stop_self_token == RTAS_UNKNOWN_SERVICE); diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c index 573b488fc48b..7f75c94af822 100644 --- a/arch/powerpc/platforms/pseries/hotplug-memory.c +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c @@ -100,10 +100,10 @@ static int pseries_remove_memblock(unsigned long base, unsigned int memblock_siz start_pfn = base >> PAGE_SHIFT; - if (!pfn_valid(start_pfn)) { - memblock_remove(base, memblock_size); - return 0; - } + lock_device_hotplug(); + + if (!pfn_valid(start_pfn)) + goto out; block_sz = memory_block_size_bytes(); sections_per_block = block_sz / MIN_MEMORY_BLOCK_SIZE; @@ -114,8 +114,10 @@ static int pseries_remove_memblock(unsigned long base, unsigned int memblock_siz base += MIN_MEMORY_BLOCK_SIZE; } +out: /* Update memory regions for memory remove */ memblock_remove(base, memblock_size); + unlock_device_hotplug(); return 0; } diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index 64603a10b863..4914fd3f41ec 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -1058,7 +1058,7 @@ static int __init apm821xx_pciex_core_init(struct device_node *np) return 1; } -static int apm821xx_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +static int __init apm821xx_pciex_init_port_hw(struct ppc4xx_pciex_port *port) { u32 val; diff --git a/arch/s390/include/asm/ccwgroup.h b/arch/s390/include/asm/ccwgroup.h index 6e670f88d125..ebc2913f9ee0 100644 --- a/arch/s390/include/asm/ccwgroup.h +++ b/arch/s390/include/asm/ccwgroup.h @@ -22,8 +22,8 @@ struct ccwgroup_device { /* public: */ unsigned int count; struct device dev; - struct ccw_device *cdev[0]; struct work_struct ungroup_work; + struct ccw_device *cdev[0]; }; /** diff --git a/arch/s390/include/asm/sigp.h b/arch/s390/include/asm/sigp.h index d091aa1aaf11..bf9c823d4020 100644 --- a/arch/s390/include/asm/sigp.h +++ b/arch/s390/include/asm/sigp.h @@ -31,4 +31,23 @@ #define SIGP_STATUS_INCORRECT_STATE 0x00000200UL #define SIGP_STATUS_NOT_RUNNING 0x00000400UL +#ifndef __ASSEMBLY__ + +static inline int __pcpu_sigp(u16 addr, u8 order, u32 parm, u32 *status) +{ + register unsigned int reg1 asm ("1") = parm; + int cc; + + asm volatile( + " sigp %1,%2,0(%3)\n" + " ipm %0\n" + " srl %0,28\n" + : "=d" (cc), "+d" (reg1) : "d" (addr), "a" (order) : "cc"); + if (status && cc == 1) + *status = reg1; + return cc; +} + +#endif /* __ASSEMBLY__ */ + #endif /* __S390_ASM_SIGP_H */ diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h index 160779394096..21703f85b48d 100644 --- a/arch/s390/include/asm/smp.h +++ b/arch/s390/include/asm/smp.h @@ -7,6 +7,8 @@ #ifndef __ASM_SMP_H #define __ASM_SMP_H +#include <asm/sigp.h> + #ifdef CONFIG_SMP #include <asm/lowcore.h> @@ -50,9 +52,18 @@ static inline int smp_store_status(int cpu) { return 0; } static inline int smp_vcpu_scheduled(int cpu) { return 1; } static inline void smp_yield_cpu(int cpu) { } static inline void smp_yield(void) { } -static inline void smp_stop_cpu(void) { } static inline void smp_fill_possible_mask(void) { } +static inline void smp_stop_cpu(void) +{ + u16 pcpu = stap(); + + for (;;) { + __pcpu_sigp(pcpu, SIGP_STOP, 0, NULL); + cpu_relax(); + } +} + #endif /* CONFIG_SMP */ #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h index c544b6f05d95..a25f09fbaf36 100644 --- a/arch/s390/include/asm/tlb.h +++ b/arch/s390/include/asm/tlb.h @@ -59,12 +59,23 @@ static inline void tlb_gather_mmu(struct mmu_gather *tlb, tlb->batch = NULL; } -static inline void tlb_flush_mmu(struct mmu_gather *tlb) +static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb) { __tlb_flush_mm_lazy(tlb->mm); +} + +static inline void tlb_flush_mmu_free(struct mmu_gather *tlb) +{ tlb_table_flush(tlb); } + +static inline void tlb_flush_mmu(struct mmu_gather *tlb) +{ + tlb_flush_mmu_tlbonly(tlb); + tlb_flush_mmu_free(tlb); +} + static inline void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) { diff --git a/arch/s390/include/uapi/asm/unistd.h b/arch/s390/include/uapi/asm/unistd.h index 5eb5c9ddb120..3802d2d3a18d 100644 --- a/arch/s390/include/uapi/asm/unistd.h +++ b/arch/s390/include/uapi/asm/unistd.h @@ -282,7 +282,8 @@ #define __NR_finit_module 344 #define __NR_sched_setattr 345 #define __NR_sched_getattr 346 -#define NR_syscalls 345 +#define __NR_renameat2 347 +#define NR_syscalls 348 /* * There are some system calls that are not present on 64 bit, some diff --git a/arch/s390/kernel/compat_wrapper.c b/arch/s390/kernel/compat_wrapper.c index 824c39dfddfc..45cdb37aa6f8 100644 --- a/arch/s390/kernel/compat_wrapper.c +++ b/arch/s390/kernel/compat_wrapper.c @@ -1,5 +1,5 @@ /* - * Compat sytem call wrappers. + * Compat system call wrappers. * * Copyright IBM Corp. 2014 */ @@ -213,3 +213,4 @@ COMPAT_SYSCALL_WRAP5(kcmp, pid_t, pid1, pid_t, pid2, int, type, unsigned long, i COMPAT_SYSCALL_WRAP3(finit_module, int, fd, const char __user *, uargs, int, flags); COMPAT_SYSCALL_WRAP3(sched_setattr, pid_t, pid, struct sched_attr __user *, attr, unsigned int, flags); COMPAT_SYSCALL_WRAP4(sched_getattr, pid_t, pid, struct sched_attr __user *, attr, unsigned int, size, unsigned int, flags); +COMPAT_SYSCALL_WRAP5(renameat2, int, olddfd, const char __user *, oldname, int, newdfd, const char __user *, newname, unsigned int, flags); diff --git a/arch/s390/kernel/dumpstack.c b/arch/s390/kernel/dumpstack.c index e6af9406987c..acb412442e5e 100644 --- a/arch/s390/kernel/dumpstack.c +++ b/arch/s390/kernel/dumpstack.c @@ -144,10 +144,10 @@ void show_registers(struct pt_regs *regs) char *mode; mode = user_mode(regs) ? "User" : "Krnl"; - printk("%s PSW : %p %p (%pSR)\n", - mode, (void *) regs->psw.mask, - (void *) regs->psw.addr, - (void *) regs->psw.addr); + printk("%s PSW : %p %p", mode, (void *)regs->psw.mask, (void *)regs->psw.addr); + if (!user_mode(regs)) + printk(" (%pSR)", (void *)regs->psw.addr); + printk("\n"); printk(" R:%x T:%x IO:%x EX:%x Key:%x M:%x W:%x " "P:%x AS:%x CC:%x PM:%x", mask_bits(regs, PSW_MASK_PER), mask_bits(regs, PSW_MASK_DAT), mask_bits(regs, PSW_MASK_IO), diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 4ac8fafec95f..1c82619eb4f7 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -64,7 +64,7 @@ void update_cr_regs(struct task_struct *task) if (task->thread.per_flags & PER_FLAG_NO_TE) cr_new &= ~(1UL << 55); if (cr_new != cr) - __ctl_load(cr, 0, 0); + __ctl_load(cr_new, 0, 0); /* Set or clear transaction execution TDC bits 62 and 63. */ __ctl_store(cr, 2, 2); cr_new = cr & ~3UL; diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index f70f2489fa5f..88d1ca81e2dd 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -1027,3 +1027,35 @@ void __init setup_arch(char **cmdline_p) /* Setup zfcpdump support */ setup_zfcpdump(); } + +#ifdef CONFIG_32BIT +static int no_removal_warning __initdata; + +static int __init parse_no_removal_warning(char *str) +{ + no_removal_warning = 1; + return 0; +} +__setup("no_removal_warning", parse_no_removal_warning); + +static int __init removal_warning(void) +{ + if (no_removal_warning) + return 0; + printk(KERN_ALERT "\n\n"); + printk(KERN_CONT "Warning - you are using a 31 bit kernel!\n\n"); + printk(KERN_CONT "We plan to remove 31 bit kernel support from the kernel sources in March 2015.\n"); + printk(KERN_CONT "Currently we assume that nobody is using the 31 bit kernel on old 31 bit\n"); + printk(KERN_CONT "hardware anymore. If you think that the code should not be removed and also\n"); + printk(KERN_CONT "future versions of the Linux kernel should be able to run in 31 bit mode\n"); + printk(KERN_CONT "please let us know. Please write to:\n"); + printk(KERN_CONT "linux390@de.ibm.com (mail address) and/or\n"); + printk(KERN_CONT "linux-s390@vger.kernel.org (mailing list).\n\n"); + printk(KERN_CONT "Thank you!\n\n"); + printk(KERN_CONT "If this kernel runs on a 64 bit machine you may consider using a 64 bit kernel.\n"); + printk(KERN_CONT "This message can be disabled with the \"no_removal_warning\" kernel parameter.\n"); + schedule_timeout_uninterruptible(300 * HZ); + return 0; +} +early_initcall(removal_warning); +#endif diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 512ce1cde2a4..86e65ec3422b 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -82,21 +82,6 @@ DEFINE_MUTEX(smp_cpu_state_mutex); /* * Signal processor helper functions. */ -static inline int __pcpu_sigp(u16 addr, u8 order, u32 parm, u32 *status) -{ - register unsigned int reg1 asm ("1") = parm; - int cc; - - asm volatile( - " sigp %1,%2,0(%3)\n" - " ipm %0\n" - " srl %0,28\n" - : "=d" (cc), "+d" (reg1) : "d" (addr), "a" (order) : "cc"); - if (status && cc == 1) - *status = reg1; - return cc; -} - static inline int __pcpu_sigp_relax(u16 addr, u8 order, u32 parm, u32 *status) { int cc; diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index 542ef488bac1..fe5cdf29a001 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -355,3 +355,4 @@ SYSCALL(sys_kcmp,sys_kcmp,compat_sys_kcmp) SYSCALL(sys_finit_module,sys_finit_module,compat_sys_finit_module) SYSCALL(sys_sched_setattr,sys_sched_setattr,compat_sys_sched_setattr) /* 345 */ SYSCALL(sys_sched_getattr,sys_sched_getattr,compat_sys_sched_getattr) +SYSCALL(sys_renameat2,sys_renameat2,compat_sys_renameat2) diff --git a/arch/s390/lib/uaccess.c b/arch/s390/lib/uaccess.c index 23f866b4c7f1..7416efe8eae4 100644 --- a/arch/s390/lib/uaccess.c +++ b/arch/s390/lib/uaccess.c @@ -338,9 +338,6 @@ static inline unsigned long strnlen_user_srst(const char __user *src, register unsigned long reg0 asm("0") = 0; unsigned long tmp1, tmp2; - if (unlikely(!size)) - return 0; - update_primary_asce(current); asm volatile( " la %2,0(%1)\n" " la %3,0(%0,%1)\n" @@ -359,6 +356,8 @@ static inline unsigned long strnlen_user_srst(const char __user *src, unsigned long __strnlen_user(const char __user *src, unsigned long size) { + if (unlikely(!size)) + return 0; update_primary_asce(current); return strnlen_user_srst(src, size); } diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 19f623f1f21c..2f51a998a67e 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -126,6 +126,133 @@ static inline int user_space_fault(struct pt_regs *regs) return 0; } +static int bad_address(void *p) +{ + unsigned long dummy; + + return probe_kernel_address((unsigned long *)p, dummy); +} + +#ifdef CONFIG_64BIT +static void dump_pagetable(unsigned long asce, unsigned long address) +{ + unsigned long *table = __va(asce & PAGE_MASK); + + pr_alert("AS:%016lx ", asce); + switch (asce & _ASCE_TYPE_MASK) { + case _ASCE_TYPE_REGION1: + table = table + ((address >> 53) & 0x7ff); + if (bad_address(table)) + goto bad; + pr_cont("R1:%016lx ", *table); + if (*table & _REGION_ENTRY_INVALID) + goto out; + table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN); + /* fallthrough */ + case _ASCE_TYPE_REGION2: + table = table + ((address >> 42) & 0x7ff); + if (bad_address(table)) + goto bad; + pr_cont("R2:%016lx ", *table); + if (*table & _REGION_ENTRY_INVALID) + goto out; + table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN); + /* fallthrough */ + case _ASCE_TYPE_REGION3: + table = table + ((address >> 31) & 0x7ff); + if (bad_address(table)) + goto bad; + pr_cont("R3:%016lx ", *table); + if (*table & (_REGION_ENTRY_INVALID | _REGION3_ENTRY_LARGE)) + goto out; + table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN); + /* fallthrough */ + case _ASCE_TYPE_SEGMENT: + table = table + ((address >> 20) & 0x7ff); + if (bad_address(table)) + goto bad; + pr_cont(KERN_CONT "S:%016lx ", *table); + if (*table & (_SEGMENT_ENTRY_INVALID | _SEGMENT_ENTRY_LARGE)) + goto out; + table = (unsigned long *)(*table & _SEGMENT_ENTRY_ORIGIN); + } + table = table + ((address >> 12) & 0xff); + if (bad_address(table)) + goto bad; + pr_cont("P:%016lx ", *table); +out: + pr_cont("\n"); + return; +bad: + pr_cont("BAD\n"); +} + +#else /* CONFIG_64BIT */ + +static void dump_pagetable(unsigned long asce, unsigned long address) +{ + unsigned long *table = __va(asce & PAGE_MASK); + + pr_alert("AS:%08lx ", asce); + table = table + ((address >> 20) & 0x7ff); + if (bad_address(table)) + goto bad; + pr_cont("S:%08lx ", *table); + if (*table & _SEGMENT_ENTRY_INVALID) + goto out; + table = (unsigned long *)(*table & _SEGMENT_ENTRY_ORIGIN); + table = table + ((address >> 12) & 0xff); + if (bad_address(table)) + goto bad; + pr_cont("P:%08lx ", *table); +out: + pr_cont("\n"); + return; +bad: + pr_cont("BAD\n"); +} + +#endif /* CONFIG_64BIT */ + +static void dump_fault_info(struct pt_regs *regs) +{ + unsigned long asce; + + pr_alert("Fault in "); + switch (regs->int_parm_long & 3) { + case 3: + pr_cont("home space "); + break; + case 2: + pr_cont("secondary space "); + break; + case 1: + pr_cont("access register "); + break; + case 0: + pr_cont("primary space "); + break; + } + pr_cont("mode while using "); + if (!user_space_fault(regs)) { + asce = S390_lowcore.kernel_asce; + pr_cont("kernel "); + } +#ifdef CONFIG_PGSTE + else if ((current->flags & PF_VCPU) && S390_lowcore.gmap) { + struct gmap *gmap = (struct gmap *)S390_lowcore.gmap; + asce = gmap->asce; + pr_cont("gmap "); + } +#endif + else { + asce = S390_lowcore.user_asce; + pr_cont("user "); + } + pr_cont("ASCE.\n"); + dump_pagetable(asce, regs->int_parm_long & __FAIL_ADDR_MASK); +} + static inline void report_user_fault(struct pt_regs *regs, long signr) { if ((task_pid_nr(current) > 1) && !show_unhandled_signals) @@ -138,8 +265,9 @@ static inline void report_user_fault(struct pt_regs *regs, long signr) regs->int_code); print_vma_addr(KERN_CONT "in ", regs->psw.addr & PSW_ADDR_INSN); printk(KERN_CONT "\n"); - printk(KERN_ALERT "failing address: %lX\n", - regs->int_parm_long & __FAIL_ADDR_MASK); + printk(KERN_ALERT "failing address: %016lx TEID: %016lx\n", + regs->int_parm_long & __FAIL_ADDR_MASK, regs->int_parm_long); + dump_fault_info(regs); show_regs(regs); } @@ -177,11 +305,13 @@ static noinline void do_no_context(struct pt_regs *regs) address = regs->int_parm_long & __FAIL_ADDR_MASK; if (!user_space_fault(regs)) printk(KERN_ALERT "Unable to handle kernel pointer dereference" - " at virtual kernel address %p\n", (void *)address); + " in virtual kernel address space\n"); else printk(KERN_ALERT "Unable to handle kernel paging request" - " at virtual user address %p\n", (void *)address); - + " in virtual user address space\n"); + printk(KERN_ALERT "failing address: %016lx TEID: %016lx\n", + regs->int_parm_long & __FAIL_ADDR_MASK, regs->int_parm_long); + dump_fault_info(regs); die(regs, "Oops"); do_exit(SIGKILL); } diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index 9c36dc398f90..452d3ebd9d0f 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -276,7 +276,6 @@ static void bpf_jit_noleaks(struct bpf_jit *jit, struct sock_filter *filter) case BPF_S_LD_W_IND: case BPF_S_LD_H_IND: case BPF_S_LD_B_IND: - case BPF_S_LDX_B_MSH: case BPF_S_LD_IMM: case BPF_S_LD_MEM: case BPF_S_MISC_TXA: diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h index 362192ed12fe..62f80d2a9df9 100644 --- a/arch/sh/include/asm/tlb.h +++ b/arch/sh/include/asm/tlb.h @@ -86,6 +86,14 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) } } +static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb) +{ +} + +static inline void tlb_flush_mmu_free(struct mmu_gather *tlb) +{ +} + static inline void tlb_flush_mmu(struct mmu_gather *tlb) { } diff --git a/arch/um/include/asm/tlb.h b/arch/um/include/asm/tlb.h index 29b0301c18aa..16eb63fac57d 100644 --- a/arch/um/include/asm/tlb.h +++ b/arch/um/include/asm/tlb.h @@ -59,13 +59,25 @@ extern void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start, unsigned long end); static inline void +tlb_flush_mmu_tlbonly(struct mmu_gather *tlb) +{ + flush_tlb_mm_range(tlb->mm, tlb->start, tlb->end); +} + +static inline void +tlb_flush_mmu_free(struct mmu_gather *tlb) +{ + init_tlb_gather(tlb); +} + +static inline void tlb_flush_mmu(struct mmu_gather *tlb) { if (!tlb->need_flush) return; - flush_tlb_mm_range(tlb->mm, tlb->start, tlb->end); - init_tlb_gather(tlb); + tlb_flush_mmu_tlbonly(tlb); + tlb_flush_mmu_free(tlb); } /* tlb_finish_mmu diff --git a/arch/um/include/shared/os.h b/arch/um/include/shared/os.h index 75298d3358e7..08eec0b691b0 100644 --- a/arch/um/include/shared/os.h +++ b/arch/um/include/shared/os.h @@ -136,6 +136,7 @@ extern int os_ioctl_generic(int fd, unsigned int cmd, unsigned long arg); extern int os_get_ifname(int fd, char *namebuf); extern int os_set_slip(int fd); extern int os_mode_fd(int fd, int mode); +extern int os_fsync_file(int fd); extern int os_seek_file(int fd, unsigned long long offset); extern int os_open_file(const char *file, struct openflags flags, int mode); diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c index f116db15d402..30fdd5d0067b 100644 --- a/arch/um/kernel/physmem.c +++ b/arch/um/kernel/physmem.c @@ -103,6 +103,7 @@ void __init setup_physmem(unsigned long start, unsigned long reserve_end, */ os_seek_file(physmem_fd, __pa(&__syscall_stub_start)); os_write_file(physmem_fd, &__syscall_stub_start, PAGE_SIZE); + os_fsync_file(physmem_fd); bootmap_size = init_bootmem(pfn, pfn + delta); free_bootmem(__pa(reserve_end) + bootmap_size, diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c index 07a750197bb0..08d90fba952c 100644 --- a/arch/um/os-Linux/file.c +++ b/arch/um/os-Linux/file.c @@ -237,6 +237,12 @@ void os_close_file(int fd) { close(fd); } +int os_fsync_file(int fd) +{ + if (fsync(fd) < 0) + return -errno; + return 0; +} int os_seek_file(int fd, unsigned long long offset) { diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c index e1704ff600ff..df9191acd926 100644 --- a/arch/um/os-Linux/main.c +++ b/arch/um/os-Linux/main.c @@ -151,6 +151,7 @@ int __init main(int argc, char **argv, char **envp) #endif do_uml_initcalls(); + change_sig(SIGPIPE, 0); ret = linux_main(argc, argv); /* diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c index 3c4af77e51a2..897e9ad0c108 100644 --- a/arch/um/os-Linux/mem.c +++ b/arch/um/os-Linux/mem.c @@ -12,337 +12,117 @@ #include <string.h> #include <sys/stat.h> #include <sys/mman.h> -#include <sys/param.h> +#include <sys/vfs.h> +#include <linux/magic.h> #include <init.h> #include <os.h> -/* Modified by which_tmpdir, which is called during early boot */ -static char *default_tmpdir = "/tmp"; - -/* - * Modified when creating the physical memory file and when checking - * the tmp filesystem for usability, both happening during early boot. - */ +/* Set by make_tempfile() during early boot. */ static char *tempdir = NULL; -static void __init find_tempdir(void) +/* Check if dir is on tmpfs. Return 0 if yes, -1 if no or error. */ +static int __init check_tmpfs(const char *dir) { - const char *dirs[] = { "TMP", "TEMP", "TMPDIR", NULL }; - int i; - char *dir = NULL; - - if (tempdir != NULL) - /* We've already been called */ - return; - for (i = 0; dirs[i]; i++) { - dir = getenv(dirs[i]); - if ((dir != NULL) && (*dir != '\0')) - break; - } - if ((dir == NULL) || (*dir == '\0')) - dir = default_tmpdir; + struct statfs st; - tempdir = malloc(strlen(dir) + 2); - if (tempdir == NULL) { - fprintf(stderr, "Failed to malloc tempdir, " - "errno = %d\n", errno); - return; - } - strcpy(tempdir, dir); - strcat(tempdir, "/"); -} - -/* - * Remove bytes from the front of the buffer and refill it so that if there's a - * partial string that we care about, it will be completed, and we can recognize - * it. - */ -static int pop(int fd, char *buf, size_t size, size_t npop) -{ - ssize_t n; - size_t len = strlen(&buf[npop]); - - memmove(buf, &buf[npop], len + 1); - n = read(fd, &buf[len], size - len - 1); - if (n < 0) - return -errno; - - buf[len + n] = '\0'; - return 1; -} - -/* - * This will return 1, with the first character in buf being the - * character following the next instance of c in the file. This will - * read the file as needed. If there's an error, -errno is returned; - * if the end of the file is reached, 0 is returned. - */ -static int next(int fd, char *buf, size_t size, char c) -{ - ssize_t n; - char *ptr; - - while ((ptr = strchr(buf, c)) == NULL) { - n = read(fd, buf, size - 1); - if (n == 0) - return 0; - else if (n < 0) - return -errno; - - buf[n] = '\0'; + printf("Checking if %s is on tmpfs...", dir); + if (statfs(dir, &st) < 0) { + printf("%s\n", strerror(errno)); + } else if (st.f_type != TMPFS_MAGIC) { + printf("no\n"); + } else { + printf("OK\n"); + return 0; } - - return pop(fd, buf, size, ptr - buf + 1); + return -1; } /* - * Decode an octal-escaped and space-terminated path of the form used by - * /proc/mounts. May be used to decode a path in-place. "out" must be at least - * as large as the input. The output is always null-terminated. "len" gets the - * length of the output, excluding the trailing null. Returns 0 if a full path - * was successfully decoded, otherwise an error. + * Choose the tempdir to use. We want something on tmpfs so that our memory is + * not subject to the host's vm.dirty_ratio. If a tempdir is specified in the + * environment, we use that even if it's not on tmpfs, but we warn the user. + * Otherwise, we try common tmpfs locations, and if no tmpfs directory is found + * then we fall back to /tmp. */ -static int decode_path(const char *in, char *out, size_t *len) +static char * __init choose_tempdir(void) { - char *first = out; - int c; + static const char * const vars[] = { + "TMPDIR", + "TMP", + "TEMP", + NULL + }; + static const char fallback_dir[] = "/tmp"; + static const char * const tmpfs_dirs[] = { + "/dev/shm", + fallback_dir, + NULL + }; int i; - int ret = -EINVAL; - while (1) { - switch (*in) { - case '\0': - goto out; - - case ' ': - ret = 0; - goto out; - - case '\\': - in++; - c = 0; - for (i = 0; i < 3; i++) { - if (*in < '0' || *in > '7') - goto out; - c = (c << 3) | (*in++ - '0'); - } - *(unsigned char *)out++ = (unsigned char) c; - break; - - default: - *out++ = *in++; - break; + const char *dir; + + printf("Checking environment variables for a tempdir..."); + for (i = 0; vars[i]; i++) { + dir = getenv(vars[i]); + if ((dir != NULL) && (*dir != '\0')) { + printf("%s\n", dir); + if (check_tmpfs(dir) >= 0) + goto done; + else + goto warn; } } + printf("none found\n"); -out: - *out = '\0'; - *len = out - first; - return ret; -} - -/* - * Computes the length of s when encoded with three-digit octal escape sequences - * for the characters in chars. - */ -static size_t octal_encoded_length(const char *s, const char *chars) -{ - size_t len = strlen(s); - while ((s = strpbrk(s, chars)) != NULL) { - len += 3; - s++; - } - - return len; -} - -enum { - OUTCOME_NOTHING_MOUNTED, - OUTCOME_TMPFS_MOUNT, - OUTCOME_NON_TMPFS_MOUNT, -}; - -/* Read a line of /proc/mounts data looking for a tmpfs mount at "path". */ -static int read_mount(int fd, char *buf, size_t bufsize, const char *path, - int *outcome) -{ - int found; - int match; - char *space; - size_t len; - - enum { - MATCH_NONE, - MATCH_EXACT, - MATCH_PARENT, - }; - - found = next(fd, buf, bufsize, ' '); - if (found != 1) - return found; - - /* - * If there's no following space in the buffer, then this path is - * truncated, so it can't be the one we're looking for. - */ - space = strchr(buf, ' '); - if (space) { - match = MATCH_NONE; - if (!decode_path(buf, buf, &len)) { - if (!strcmp(buf, path)) - match = MATCH_EXACT; - else if (!strncmp(buf, path, len) - && (path[len] == '/' || !strcmp(buf, "/"))) - match = MATCH_PARENT; - } - - found = pop(fd, buf, bufsize, space - buf + 1); - if (found != 1) - return found; - - switch (match) { - case MATCH_EXACT: - if (!strncmp(buf, "tmpfs", strlen("tmpfs"))) - *outcome = OUTCOME_TMPFS_MOUNT; - else - *outcome = OUTCOME_NON_TMPFS_MOUNT; - break; - - case MATCH_PARENT: - /* This mount obscures any previous ones. */ - *outcome = OUTCOME_NOTHING_MOUNTED; - break; - } + for (i = 0; tmpfs_dirs[i]; i++) { + dir = tmpfs_dirs[i]; + if (check_tmpfs(dir) >= 0) + goto done; } - return next(fd, buf, bufsize, '\n'); + dir = fallback_dir; +warn: + printf("Warning: tempdir %s is not on tmpfs\n", dir); +done: + /* Make a copy since getenv results may not remain valid forever. */ + return strdup(dir); } -/* which_tmpdir is called only during early boot */ -static int checked_tmpdir = 0; - /* - * Look for a tmpfs mounted at /dev/shm. I couldn't find a cleaner - * way to do this than to parse /proc/mounts. statfs will return the - * same filesystem magic number and fs id for both /dev and /dev/shm - * when they are both tmpfs, so you can't tell if they are different - * filesystems. Also, there seems to be no other way of finding the - * mount point of a filesystem from within it. - * - * If a /dev/shm tmpfs entry is found, then we switch to using it. - * Otherwise, we stay with the default /tmp. + * Create an unlinked tempfile in a suitable tempdir. template must be the + * basename part of the template with a leading '/'. */ -static void which_tmpdir(void) +static int __init make_tempfile(const char *template) { + char *tempname; int fd; - int found; - int outcome; - char *path; - char *buf; - size_t bufsize; - if (checked_tmpdir) - return; - - checked_tmpdir = 1; - - printf("Checking for tmpfs mount on /dev/shm..."); - - path = realpath("/dev/shm", NULL); - if (!path) { - printf("failed to check real path, errno = %d\n", errno); - return; - } - printf("%s...", path); - - /* - * The buffer needs to be able to fit the full octal-escaped path, a - * space, and a trailing null in order to successfully decode it. - */ - bufsize = octal_encoded_length(path, " \t\n\\") + 2; - - if (bufsize < 128) - bufsize = 128; - - buf = malloc(bufsize); - if (!buf) { - printf("malloc failed, errno = %d\n", errno); - goto out; - } - buf[0] = '\0'; - - fd = open("/proc/mounts", O_RDONLY); - if (fd < 0) { - printf("failed to open /proc/mounts, errno = %d\n", errno); - goto out1; - } - - outcome = OUTCOME_NOTHING_MOUNTED; - while (1) { - found = read_mount(fd, buf, bufsize, path, &outcome); - if (found != 1) - break; - } - - if (found < 0) { - printf("read returned errno %d\n", -found); - } else { - switch (outcome) { - case OUTCOME_TMPFS_MOUNT: - printf("OK\n"); - default_tmpdir = "/dev/shm"; - break; - - case OUTCOME_NON_TMPFS_MOUNT: - printf("not tmpfs\n"); - break; - - default: - printf("nothing mounted on /dev/shm\n"); - break; + if (tempdir == NULL) { + tempdir = choose_tempdir(); + if (tempdir == NULL) { + fprintf(stderr, "Failed to choose tempdir: %s\n", + strerror(errno)); + return -1; } } - close(fd); -out1: - free(buf); -out: - free(path); -} - -static int __init make_tempfile(const char *template, char **out_tempname, - int do_unlink) -{ - char *tempname; - int fd; - - which_tmpdir(); - tempname = malloc(MAXPATHLEN); + tempname = malloc(strlen(tempdir) + strlen(template) + 1); if (tempname == NULL) return -1; - find_tempdir(); - if ((tempdir == NULL) || (strlen(tempdir) >= MAXPATHLEN)) - goto out; - - if (template[0] != '/') - strcpy(tempname, tempdir); - else - tempname[0] = '\0'; - strncat(tempname, template, MAXPATHLEN-1-strlen(tempname)); + strcpy(tempname, tempdir); + strcat(tempname, template); fd = mkstemp(tempname); if (fd < 0) { fprintf(stderr, "open - cannot create %s: %s\n", tempname, strerror(errno)); goto out; } - if (do_unlink && (unlink(tempname) < 0)) { + if (unlink(tempname) < 0) { perror("unlink"); goto close; } - if (out_tempname) { - *out_tempname = tempname; - } else - free(tempname); + free(tempname); return fd; close: close(fd); @@ -351,14 +131,14 @@ out: return -1; } -#define TEMPNAME_TEMPLATE "vm_file-XXXXXX" +#define TEMPNAME_TEMPLATE "/vm_file-XXXXXX" static int __init create_tmp_file(unsigned long long len) { int fd, err; char zero; - fd = make_tempfile(TEMPNAME_TEMPLATE, NULL, 1); + fd = make_tempfile(TEMPNAME_TEMPLATE); if (fd < 0) exit(1); @@ -402,7 +182,6 @@ int __init create_mem_file(unsigned long long len) return fd; } - void __init check_tmpexec(void) { void *addr; @@ -410,14 +189,13 @@ void __init check_tmpexec(void) addr = mmap(NULL, UM_KERN_PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE, fd, 0); - printf("Checking PROT_EXEC mmap in %s...",tempdir); - fflush(stdout); + printf("Checking PROT_EXEC mmap in %s...", tempdir); if (addr == MAP_FAILED) { err = errno; - perror("failed"); + printf("%s\n", strerror(err)); close(fd); if (err == EPERM) - printf("%s must be not mounted noexec\n",tempdir); + printf("%s must be not mounted noexec\n", tempdir); exit(1); } printf("OK\n"); diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 602f57e590b5..ce6ad7e6a7d7 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -83,7 +83,9 @@ else KBUILD_CFLAGS += -m64 # Don't autogenerate traditional x87, MMX or SSE instructions - KBUILD_CFLAGS += -mno-mmx -mno-sse -mno-80387 -mno-fp-ret-in-387 + KBUILD_CFLAGS += -mno-mmx -mno-sse + KBUILD_CFLAGS += $(call cc-option,-mno-80387) + KBUILD_CFLAGS += $(call cc-option,-mno-fp-ret-in-387) # Use -mpreferred-stack-boundary=3 if supported. KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=3) @@ -250,8 +252,8 @@ archclean: PHONY += kvmconfig kvmconfig: $(if $(wildcard $(objtree)/.config),, $(error You need an existing .config for this target)) - $(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config arch/x86/configs/kvm_guest.config - $(Q)yes "" | $(MAKE) oldconfig + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(srctree)/arch/x86/configs/kvm_guest.config + $(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig define archhelp echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)' diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index fcaf9c961265..7de069afb382 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -60,7 +60,7 @@ | X86_CR4_PSE | X86_CR4_PAE | X86_CR4_MCE \ | X86_CR4_PGE | X86_CR4_PCE | X86_CR4_OSFXSR | X86_CR4_PCIDE \ | X86_CR4_OSXSAVE | X86_CR4_SMEP | X86_CR4_FSGSBASE \ - | X86_CR4_OSXMMEXCPT | X86_CR4_VMXE)) + | X86_CR4_OSXMMEXCPT | X86_CR4_VMXE | X86_CR4_SMAP)) #define CR8_RESERVED_BITS (~(unsigned long)X86_CR8_TPR) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 6ad4658de705..d23aa82e7a7b 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3425,6 +3425,11 @@ int get_nr_irqs_gsi(void) return nr_irqs_gsi; } +unsigned int arch_dynirq_lower_bound(unsigned int from) +{ + return from < nr_irqs_gsi ? nr_irqs_gsi : from; +} + int __init arch_probe_nr_irqs(void) { int nr; diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index eeee23ff75ef..68317c80de7f 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -598,7 +598,6 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b) { struct mce m; int i; - unsigned long *v; this_cpu_inc(mce_poll_count); @@ -618,8 +617,7 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b) if (!(m.status & MCI_STATUS_VAL)) continue; - v = &get_cpu_var(mce_polled_error); - set_bit(0, v); + this_cpu_write(mce_polled_error, 1); /* * Uncorrected or signalled events are handled by the exception * handler when it is enabled, so don't process those here. diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c index 3bdb95ae8c43..9a316b21df8b 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c @@ -42,7 +42,7 @@ static DEFINE_PER_CPU(mce_banks_t, mce_banks_owned); * cmci_discover_lock protects against parallel discovery attempts * which could race against each other. */ -static DEFINE_RAW_SPINLOCK(cmci_discover_lock); +static DEFINE_SPINLOCK(cmci_discover_lock); #define CMCI_THRESHOLD 1 #define CMCI_POLL_INTERVAL (30 * HZ) @@ -144,14 +144,14 @@ static void cmci_storm_disable_banks(void) int bank; u64 val; - raw_spin_lock_irqsave(&cmci_discover_lock, flags); + spin_lock_irqsave(&cmci_discover_lock, flags); owned = __get_cpu_var(mce_banks_owned); for_each_set_bit(bank, owned, MAX_NR_BANKS) { rdmsrl(MSR_IA32_MCx_CTL2(bank), val); val &= ~MCI_CTL2_CMCI_EN; wrmsrl(MSR_IA32_MCx_CTL2(bank), val); } - raw_spin_unlock_irqrestore(&cmci_discover_lock, flags); + spin_unlock_irqrestore(&cmci_discover_lock, flags); } static bool cmci_storm_detect(void) @@ -211,7 +211,7 @@ static void cmci_discover(int banks) int i; int bios_wrong_thresh = 0; - raw_spin_lock_irqsave(&cmci_discover_lock, flags); + spin_lock_irqsave(&cmci_discover_lock, flags); for (i = 0; i < banks; i++) { u64 val; int bios_zero_thresh = 0; @@ -266,7 +266,7 @@ static void cmci_discover(int banks) WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks))); } } - raw_spin_unlock_irqrestore(&cmci_discover_lock, flags); + spin_unlock_irqrestore(&cmci_discover_lock, flags); if (mca_cfg.bios_cmci_threshold && bios_wrong_thresh) { pr_info_once( "bios_cmci_threshold: Some banks do not have valid thresholds set\n"); @@ -316,10 +316,10 @@ void cmci_clear(void) if (!cmci_supported(&banks)) return; - raw_spin_lock_irqsave(&cmci_discover_lock, flags); + spin_lock_irqsave(&cmci_discover_lock, flags); for (i = 0; i < banks; i++) __cmci_disable_bank(i); - raw_spin_unlock_irqrestore(&cmci_discover_lock, flags); + spin_unlock_irqrestore(&cmci_discover_lock, flags); } static void cmci_rediscover_work_func(void *arg) @@ -360,9 +360,9 @@ void cmci_disable_bank(int bank) if (!cmci_supported(&banks)) return; - raw_spin_lock_irqsave(&cmci_discover_lock, flags); + spin_lock_irqsave(&cmci_discover_lock, flags); __cmci_disable_bank(bank); - raw_spin_unlock_irqrestore(&cmci_discover_lock, flags); + spin_unlock_irqrestore(&cmci_discover_lock, flags); } static void intel_init_cmci(void) diff --git a/arch/x86/kernel/cpu/perf_event_intel_rapl.c b/arch/x86/kernel/cpu/perf_event_intel_rapl.c index 059218ed5208..619f7699487a 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_rapl.c +++ b/arch/x86/kernel/cpu/perf_event_intel_rapl.c @@ -59,7 +59,7 @@ #define INTEL_RAPL_PKG 0x2 /* pseudo-encoding */ #define RAPL_IDX_RAM_NRG_STAT 2 /* DRAM */ #define INTEL_RAPL_RAM 0x3 /* pseudo-encoding */ -#define RAPL_IDX_PP1_NRG_STAT 3 /* DRAM */ +#define RAPL_IDX_PP1_NRG_STAT 3 /* gpu */ #define INTEL_RAPL_PP1 0x4 /* pseudo-encoding */ /* Clients have PP0, PKG */ @@ -72,6 +72,12 @@ 1<<RAPL_IDX_PKG_NRG_STAT|\ 1<<RAPL_IDX_RAM_NRG_STAT) +/* Servers have PP0, PKG, RAM, PP1 */ +#define RAPL_IDX_HSW (1<<RAPL_IDX_PP0_NRG_STAT|\ + 1<<RAPL_IDX_PKG_NRG_STAT|\ + 1<<RAPL_IDX_RAM_NRG_STAT|\ + 1<<RAPL_IDX_PP1_NRG_STAT) + /* * event code: LSB 8 bits, passed in attr->config * any other bit is reserved @@ -425,6 +431,24 @@ static struct attribute *rapl_events_cln_attr[] = { NULL, }; +static struct attribute *rapl_events_hsw_attr[] = { + EVENT_PTR(rapl_cores), + EVENT_PTR(rapl_pkg), + EVENT_PTR(rapl_gpu), + EVENT_PTR(rapl_ram), + + EVENT_PTR(rapl_cores_unit), + EVENT_PTR(rapl_pkg_unit), + EVENT_PTR(rapl_gpu_unit), + EVENT_PTR(rapl_ram_unit), + + EVENT_PTR(rapl_cores_scale), + EVENT_PTR(rapl_pkg_scale), + EVENT_PTR(rapl_gpu_scale), + EVENT_PTR(rapl_ram_scale), + NULL, +}; + static struct attribute_group rapl_pmu_events_group = { .name = "events", .attrs = NULL, /* patched at runtime */ @@ -511,6 +535,7 @@ static int rapl_cpu_prepare(int cpu) struct rapl_pmu *pmu = per_cpu(rapl_pmu, cpu); int phys_id = topology_physical_package_id(cpu); u64 ms; + u64 msr_rapl_power_unit_bits; if (pmu) return 0; @@ -518,6 +543,10 @@ static int rapl_cpu_prepare(int cpu) if (phys_id < 0) return -1; + /* protect rdmsrl() to handle virtualization */ + if (rdmsrl_safe(MSR_RAPL_POWER_UNIT, &msr_rapl_power_unit_bits)) + return -1; + pmu = kzalloc_node(sizeof(*pmu), GFP_KERNEL, cpu_to_node(cpu)); if (!pmu) return -1; @@ -531,8 +560,7 @@ static int rapl_cpu_prepare(int cpu) * * we cache in local PMU instance */ - rdmsrl(MSR_RAPL_POWER_UNIT, pmu->hw_unit); - pmu->hw_unit = (pmu->hw_unit >> 8) & 0x1FULL; + pmu->hw_unit = (msr_rapl_power_unit_bits >> 8) & 0x1FULL; pmu->pmu = &rapl_pmu_class; /* @@ -631,11 +659,14 @@ static int __init rapl_pmu_init(void) switch (boot_cpu_data.x86_model) { case 42: /* Sandy Bridge */ case 58: /* Ivy Bridge */ - case 60: /* Haswell */ - case 69: /* Haswell-Celeron */ rapl_cntr_mask = RAPL_IDX_CLN; rapl_pmu_events_group.attrs = rapl_events_cln_attr; break; + case 60: /* Haswell */ + case 69: /* Haswell-Celeron */ + rapl_cntr_mask = RAPL_IDX_HSW; + rapl_pmu_events_group.attrs = rapl_events_hsw_attr; + break; case 45: /* Sandy Bridge-EP */ case 62: /* IvyTown */ rapl_cntr_mask = RAPL_IDX_SRV; @@ -650,7 +681,9 @@ static int __init rapl_pmu_init(void) cpu_notifier_register_begin(); for_each_online_cpu(cpu) { - rapl_cpu_prepare(cpu); + ret = rapl_cpu_prepare(cpu); + if (ret) + goto out; rapl_cpu_init(cpu); } @@ -673,6 +706,7 @@ static int __init rapl_pmu_init(void) hweight32(rapl_cntr_mask), ktime_to_ms(pmu->timer_interval)); +out: cpu_notifier_register_done(); return 0; diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index b0cc3809723d..6e2537c32190 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -240,7 +240,7 @@ static u32 __init intel_stolen_base(int num, int slot, int func, size_t stolen_s return base; } -#define KB(x) ((x) * 1024) +#define KB(x) ((x) * 1024UL) #define MB(x) (KB (KB (x))) #define GB(x) (MB (KB (x))) diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c index 79a3f9682871..61b17dc2c277 100644 --- a/arch/x86/kernel/kprobes/core.c +++ b/arch/x86/kernel/kprobes/core.c @@ -897,9 +897,10 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - switch (kcb->kprobe_status) { - case KPROBE_HIT_SS: - case KPROBE_REENTER: + if (unlikely(regs->ip == (unsigned long)cur->ainsn.insn)) { + /* This must happen on single-stepping */ + WARN_ON(kcb->kprobe_status != KPROBE_HIT_SS && + kcb->kprobe_status != KPROBE_REENTER); /* * We are here because the instruction being single * stepped caused a page fault. We reset the current @@ -914,9 +915,8 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) else reset_current_kprobe(); preempt_enable_no_resched(); - break; - case KPROBE_HIT_ACTIVE: - case KPROBE_HIT_SSDONE: + } else if (kcb->kprobe_status == KPROBE_HIT_ACTIVE || + kcb->kprobe_status == KPROBE_HIT_SSDONE) { /* * We increment the nmissed count for accounting, * we can also use npre/npostfault count for accounting @@ -945,10 +945,8 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) * fixup routine could not handle it, * Let do_page_fault() fix it. */ - break; - default: - break; } + return 0; } diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 654b46574b91..3399d3a99730 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -114,8 +114,8 @@ EXPORT_SYMBOL(machine_real_restart); */ static int __init set_pci_reboot(const struct dmi_system_id *d) { - if (reboot_type != BOOT_CF9) { - reboot_type = BOOT_CF9; + if (reboot_type != BOOT_CF9_FORCE) { + reboot_type = BOOT_CF9_FORCE; pr_info("%s series board detected. Selecting %s-method for reboots.\n", d->ident, "PCI"); } @@ -458,20 +458,23 @@ void __attribute__((weak)) mach_reboot_fixups(void) } /* - * Windows compatible x86 hardware expects the following on reboot: + * To the best of our knowledge Windows compatible x86 hardware expects + * the following on reboot: * * 1) If the FADT has the ACPI reboot register flag set, try it * 2) If still alive, write to the keyboard controller * 3) If still alive, write to the ACPI reboot register again * 4) If still alive, write to the keyboard controller again * 5) If still alive, call the EFI runtime service to reboot - * 6) If still alive, write to the PCI IO port 0xCF9 to reboot - * 7) If still alive, inform BIOS to do a proper reboot + * 6) If no EFI runtime service, call the BIOS to do a reboot * - * If the machine is still alive at this stage, it gives up. We default to - * following the same pattern, except that if we're still alive after (7) we'll - * try to force a triple fault and then cycle between hitting the keyboard - * controller and doing that + * We default to following the same pattern. We also have + * two other reboot methods: 'triple fault' and 'PCI', which + * can be triggered via the reboot= kernel boot option or + * via quirks. + * + * This means that this function can never return, it can misbehave + * by not rebooting properly and hanging. */ static void native_machine_emergency_restart(void) { @@ -492,6 +495,11 @@ static void native_machine_emergency_restart(void) for (;;) { /* Could also try the reset bit in the Hammer NB */ switch (reboot_type) { + case BOOT_ACPI: + acpi_reboot(); + reboot_type = BOOT_KBD; + break; + case BOOT_KBD: mach_reboot_fixups(); /* For board specific fixups */ @@ -509,43 +517,29 @@ static void native_machine_emergency_restart(void) } break; - case BOOT_TRIPLE: - load_idt(&no_idt); - __asm__ __volatile__("int3"); - - /* We're probably dead after this, but... */ - reboot_type = BOOT_KBD; - break; - - case BOOT_BIOS: - machine_real_restart(MRR_BIOS); - - /* We're probably dead after this, but... */ - reboot_type = BOOT_TRIPLE; - break; - - case BOOT_ACPI: - acpi_reboot(); - reboot_type = BOOT_KBD; - break; - case BOOT_EFI: if (efi_enabled(EFI_RUNTIME_SERVICES)) efi.reset_system(reboot_mode == REBOOT_WARM ? EFI_RESET_WARM : EFI_RESET_COLD, EFI_SUCCESS, 0, NULL); - reboot_type = BOOT_CF9_COND; + reboot_type = BOOT_BIOS; + break; + + case BOOT_BIOS: + machine_real_restart(MRR_BIOS); + + /* We're probably dead after this, but... */ + reboot_type = BOOT_CF9_SAFE; break; - case BOOT_CF9: + case BOOT_CF9_FORCE: port_cf9_safe = true; /* Fall through */ - case BOOT_CF9_COND: + case BOOT_CF9_SAFE: if (port_cf9_safe) { - u8 reboot_code = reboot_mode == REBOOT_WARM ? - 0x06 : 0x0E; + u8 reboot_code = reboot_mode == REBOOT_WARM ? 0x06 : 0x0E; u8 cf9 = inb(0xcf9) & ~reboot_code; outb(cf9|2, 0xcf9); /* Request hard reset */ udelay(50); @@ -553,7 +547,15 @@ static void native_machine_emergency_restart(void) outb(cf9|reboot_code, 0xcf9); udelay(50); } - reboot_type = BOOT_BIOS; + reboot_type = BOOT_TRIPLE; + break; + + case BOOT_TRIPLE: + load_idt(&no_idt); + __asm__ __volatile__("int3"); + + /* We're probably dead after this, but... */ + reboot_type = BOOT_KBD; break; } } diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c index f6584a90aba3..5edc34b5b951 100644 --- a/arch/x86/kernel/vsmp_64.c +++ b/arch/x86/kernel/vsmp_64.c @@ -26,6 +26,9 @@ #define TOPOLOGY_REGISTER_OFFSET 0x10 +/* Flag below is initialized once during vSMP PCI initialization. */ +static int irq_routing_comply = 1; + #if defined CONFIG_PCI && defined CONFIG_PARAVIRT /* * Interrupt control on vSMPowered systems: @@ -101,6 +104,10 @@ static void __init set_vsmp_pv_ops(void) #ifdef CONFIG_SMP if (cap & ctl & BIT(8)) { ctl &= ~BIT(8); + + /* Interrupt routing set to ignore */ + irq_routing_comply = 0; + #ifdef CONFIG_PROC_FS /* Don't let users change irq affinity via procfs */ no_irq_affinity = 1; @@ -218,7 +225,9 @@ static void vsmp_apic_post_init(void) { /* need to update phys_pkg_id */ apic->phys_pkg_id = apicid_phys_pkg_id; - apic->vector_allocation_domain = fill_vector_allocation_domain; + + if (!irq_routing_comply) + apic->vector_allocation_domain = fill_vector_allocation_domain; } void __init vsmp_init(void) diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index bea60671ef8a..f47a104a749c 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -308,7 +308,7 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function, const u32 kvm_supported_word9_x86_features = F(FSGSBASE) | F(BMI1) | F(HLE) | F(AVX2) | F(SMEP) | F(BMI2) | F(ERMS) | f_invpcid | F(RTM) | f_mpx | F(RDSEED) | - F(ADX); + F(ADX) | F(SMAP); /* all calls to cpuid_count() should be made on the same cpu */ get_cpu(); diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h index a2a1bb7ed8c1..eeecbed26ac7 100644 --- a/arch/x86/kvm/cpuid.h +++ b/arch/x86/kvm/cpuid.h @@ -48,6 +48,14 @@ static inline bool guest_cpuid_has_smep(struct kvm_vcpu *vcpu) return best && (best->ebx & bit(X86_FEATURE_SMEP)); } +static inline bool guest_cpuid_has_smap(struct kvm_vcpu *vcpu) +{ + struct kvm_cpuid_entry2 *best; + + best = kvm_find_cpuid_entry(vcpu, 7, 0); + return best && (best->ebx & bit(X86_FEATURE_SMAP)); +} + static inline bool guest_cpuid_has_fsgsbase(struct kvm_vcpu *vcpu) { struct kvm_cpuid_entry2 *best; diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index f5704d9e5ddc..813d31038b93 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -3601,20 +3601,27 @@ static void reset_rsvds_bits_mask_ept(struct kvm_vcpu *vcpu, } } -static void update_permission_bitmask(struct kvm_vcpu *vcpu, +void update_permission_bitmask(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu, bool ept) { unsigned bit, byte, pfec; u8 map; - bool fault, x, w, u, wf, uf, ff, smep; + bool fault, x, w, u, wf, uf, ff, smapf, cr4_smap, cr4_smep, smap = 0; - smep = kvm_read_cr4_bits(vcpu, X86_CR4_SMEP); + cr4_smep = kvm_read_cr4_bits(vcpu, X86_CR4_SMEP); + cr4_smap = kvm_read_cr4_bits(vcpu, X86_CR4_SMAP); for (byte = 0; byte < ARRAY_SIZE(mmu->permissions); ++byte) { pfec = byte << 1; map = 0; wf = pfec & PFERR_WRITE_MASK; uf = pfec & PFERR_USER_MASK; ff = pfec & PFERR_FETCH_MASK; + /* + * PFERR_RSVD_MASK bit is set in PFEC if the access is not + * subject to SMAP restrictions, and cleared otherwise. The + * bit is only meaningful if the SMAP bit is set in CR4. + */ + smapf = !(pfec & PFERR_RSVD_MASK); for (bit = 0; bit < 8; ++bit) { x = bit & ACC_EXEC_MASK; w = bit & ACC_WRITE_MASK; @@ -3626,12 +3633,33 @@ static void update_permission_bitmask(struct kvm_vcpu *vcpu, /* Allow supervisor writes if !cr0.wp */ w |= !is_write_protection(vcpu) && !uf; /* Disallow supervisor fetches of user code if cr4.smep */ - x &= !(smep && u && !uf); + x &= !(cr4_smep && u && !uf); + + /* + * SMAP:kernel-mode data accesses from user-mode + * mappings should fault. A fault is considered + * as a SMAP violation if all of the following + * conditions are ture: + * - X86_CR4_SMAP is set in CR4 + * - An user page is accessed + * - Page fault in kernel mode + * - if CPL = 3 or X86_EFLAGS_AC is clear + * + * Here, we cover the first three conditions. + * The fourth is computed dynamically in + * permission_fault() and is in smapf. + * + * Also, SMAP does not affect instruction + * fetches, add the !ff check here to make it + * clearer. + */ + smap = cr4_smap && u && !uf && !ff; } else /* Not really needed: no U/S accesses on ept */ u = 1; - fault = (ff && !x) || (uf && !u) || (wf && !w); + fault = (ff && !x) || (uf && !u) || (wf && !w) || + (smapf && smap); map |= fault << bit; } mmu->permissions[byte] = map; diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h index 292615274358..3842e70bdb7c 100644 --- a/arch/x86/kvm/mmu.h +++ b/arch/x86/kvm/mmu.h @@ -44,11 +44,17 @@ #define PT_DIRECTORY_LEVEL 2 #define PT_PAGE_TABLE_LEVEL 1 -#define PFERR_PRESENT_MASK (1U << 0) -#define PFERR_WRITE_MASK (1U << 1) -#define PFERR_USER_MASK (1U << 2) -#define PFERR_RSVD_MASK (1U << 3) -#define PFERR_FETCH_MASK (1U << 4) +#define PFERR_PRESENT_BIT 0 +#define PFERR_WRITE_BIT 1 +#define PFERR_USER_BIT 2 +#define PFERR_RSVD_BIT 3 +#define PFERR_FETCH_BIT 4 + +#define PFERR_PRESENT_MASK (1U << PFERR_PRESENT_BIT) +#define PFERR_WRITE_MASK (1U << PFERR_WRITE_BIT) +#define PFERR_USER_MASK (1U << PFERR_USER_BIT) +#define PFERR_RSVD_MASK (1U << PFERR_RSVD_BIT) +#define PFERR_FETCH_MASK (1U << PFERR_FETCH_BIT) int kvm_mmu_get_spte_hierarchy(struct kvm_vcpu *vcpu, u64 addr, u64 sptes[4]); void kvm_mmu_set_mmio_spte_mask(u64 mmio_mask); @@ -73,6 +79,8 @@ int handle_mmio_page_fault_common(struct kvm_vcpu *vcpu, u64 addr, bool direct); void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu, struct kvm_mmu *context); void kvm_init_shadow_ept_mmu(struct kvm_vcpu *vcpu, struct kvm_mmu *context, bool execonly); +void update_permission_bitmask(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu, + bool ept); static inline unsigned int kvm_mmu_available_pages(struct kvm *kvm) { @@ -110,10 +118,30 @@ static inline bool is_write_protection(struct kvm_vcpu *vcpu) * Will a fault with a given page-fault error code (pfec) cause a permission * fault with the given access (in ACC_* format)? */ -static inline bool permission_fault(struct kvm_mmu *mmu, unsigned pte_access, - unsigned pfec) +static inline bool permission_fault(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu, + unsigned pte_access, unsigned pfec) { - return (mmu->permissions[pfec >> 1] >> pte_access) & 1; + int cpl = kvm_x86_ops->get_cpl(vcpu); + unsigned long rflags = kvm_x86_ops->get_rflags(vcpu); + + /* + * If CPL < 3, SMAP prevention are disabled if EFLAGS.AC = 1. + * + * If CPL = 3, SMAP applies to all supervisor-mode data accesses + * (these are implicit supervisor accesses) regardless of the value + * of EFLAGS.AC. + * + * This computes (cpl < 3) && (rflags & X86_EFLAGS_AC), leaving + * the result in X86_EFLAGS_AC. We then insert it in place of + * the PFERR_RSVD_MASK bit; this bit will always be zero in pfec, + * but it will be one in index if SMAP checks are being overridden. + * It is important to keep this branchless. + */ + unsigned long smap = (cpl - 3) & (rflags & X86_EFLAGS_AC); + int index = (pfec >> 1) + + (smap >> (X86_EFLAGS_AC_BIT - PFERR_RSVD_BIT + 1)); + + return (mmu->permissions[index] >> pte_access) & 1; } void kvm_mmu_invalidate_zap_all_pages(struct kvm *kvm); diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index b1e6c1bf68d3..123efd3ec29f 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -353,7 +353,7 @@ retry_walk: walker->ptes[walker->level - 1] = pte; } while (!is_last_gpte(mmu, walker->level, pte)); - if (unlikely(permission_fault(mmu, pte_access, access))) { + if (unlikely(permission_fault(vcpu, mmu, pte_access, access))) { errcode |= PFERR_PRESENT_MASK; goto error; } diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 1320e0f8e611..33e8c028842f 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -503,7 +503,7 @@ static inline struct vcpu_vmx *to_vmx(struct kvm_vcpu *vcpu) [number##_HIGH] = VMCS12_OFFSET(name)+4 -static const unsigned long shadow_read_only_fields[] = { +static unsigned long shadow_read_only_fields[] = { /* * We do NOT shadow fields that are modified when L0 * traps and emulates any vmx instruction (e.g. VMPTRLD, @@ -526,10 +526,10 @@ static const unsigned long shadow_read_only_fields[] = { GUEST_LINEAR_ADDRESS, GUEST_PHYSICAL_ADDRESS }; -static const int max_shadow_read_only_fields = +static int max_shadow_read_only_fields = ARRAY_SIZE(shadow_read_only_fields); -static const unsigned long shadow_read_write_fields[] = { +static unsigned long shadow_read_write_fields[] = { GUEST_RIP, GUEST_RSP, GUEST_CR0, @@ -558,7 +558,7 @@ static const unsigned long shadow_read_write_fields[] = { HOST_FS_SELECTOR, HOST_GS_SELECTOR }; -static const int max_shadow_read_write_fields = +static int max_shadow_read_write_fields = ARRAY_SIZE(shadow_read_write_fields); static const unsigned short vmcs_field_to_offset_table[] = { @@ -3009,6 +3009,41 @@ static void free_kvm_area(void) } } +static void init_vmcs_shadow_fields(void) +{ + int i, j; + + /* No checks for read only fields yet */ + + for (i = j = 0; i < max_shadow_read_write_fields; i++) { + switch (shadow_read_write_fields[i]) { + case GUEST_BNDCFGS: + if (!vmx_mpx_supported()) + continue; + break; + default: + break; + } + + if (j < i) + shadow_read_write_fields[j] = + shadow_read_write_fields[i]; + j++; + } + max_shadow_read_write_fields = j; + + /* shadowed fields guest access without vmexit */ + for (i = 0; i < max_shadow_read_write_fields; i++) { + clear_bit(shadow_read_write_fields[i], + vmx_vmwrite_bitmap); + clear_bit(shadow_read_write_fields[i], + vmx_vmread_bitmap); + } + for (i = 0; i < max_shadow_read_only_fields; i++) + clear_bit(shadow_read_only_fields[i], + vmx_vmread_bitmap); +} + static __init int alloc_kvm_area(void) { int cpu; @@ -3039,6 +3074,8 @@ static __init int hardware_setup(void) enable_vpid = 0; if (!cpu_has_vmx_shadow_vmcs()) enable_shadow_vmcs = 0; + if (enable_shadow_vmcs) + init_vmcs_shadow_fields(); if (!cpu_has_vmx_ept() || !cpu_has_vmx_ept_4levels()) { @@ -3484,13 +3521,14 @@ static int vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) hw_cr4 &= ~X86_CR4_PAE; hw_cr4 |= X86_CR4_PSE; /* - * SMEP is disabled if CPU is in non-paging mode in - * hardware. However KVM always uses paging mode to + * SMEP/SMAP is disabled if CPU is in non-paging mode + * in hardware. However KVM always uses paging mode to * emulate guest non-paging mode with TDP. - * To emulate this behavior, SMEP needs to be manually - * disabled when guest switches to non-paging mode. + * To emulate this behavior, SMEP/SMAP needs to be + * manually disabled when guest switches to non-paging + * mode. */ - hw_cr4 &= ~X86_CR4_SMEP; + hw_cr4 &= ~(X86_CR4_SMEP | X86_CR4_SMAP); } else if (!(cr4 & X86_CR4_PAE)) { hw_cr4 &= ~X86_CR4_PAE; } @@ -8802,14 +8840,6 @@ static int __init vmx_init(void) memset(vmx_vmread_bitmap, 0xff, PAGE_SIZE); memset(vmx_vmwrite_bitmap, 0xff, PAGE_SIZE); - /* shadowed read/write fields */ - for (i = 0; i < max_shadow_read_write_fields; i++) { - clear_bit(shadow_read_write_fields[i], vmx_vmwrite_bitmap); - clear_bit(shadow_read_write_fields[i], vmx_vmread_bitmap); - } - /* shadowed read only fields */ - for (i = 0; i < max_shadow_read_only_fields; i++) - clear_bit(shadow_read_only_fields[i], vmx_vmread_bitmap); /* * Allow direct access to the PC debug port (it is often used for I/O diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 9d1b5cd4d34c..8b8fc0b792ba 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -652,6 +652,9 @@ int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) if (!guest_cpuid_has_smep(vcpu) && (cr4 & X86_CR4_SMEP)) return 1; + if (!guest_cpuid_has_smap(vcpu) && (cr4 & X86_CR4_SMAP)) + return 1; + if (!guest_cpuid_has_fsgsbase(vcpu) && (cr4 & X86_CR4_FSGSBASE)) return 1; @@ -680,6 +683,9 @@ int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) (!(cr4 & X86_CR4_PCIDE) && (old_cr4 & X86_CR4_PCIDE))) kvm_mmu_reset_context(vcpu); + if ((cr4 ^ old_cr4) & X86_CR4_SMAP) + update_permission_bitmask(vcpu, vcpu->arch.walk_mmu, false); + if ((cr4 ^ old_cr4) & X86_CR4_OSXSAVE) kvm_update_cpuid(vcpu); @@ -1117,7 +1123,6 @@ static inline u64 get_kernel_ns(void) { struct timespec ts; - WARN_ON(preemptible()); ktime_get_ts(&ts); monotonic_to_bootbased(&ts); return timespec_to_ns(&ts); @@ -4164,7 +4169,8 @@ static int vcpu_mmio_gva_to_gpa(struct kvm_vcpu *vcpu, unsigned long gva, | (write ? PFERR_WRITE_MASK : 0); if (vcpu_match_mmio_gva(vcpu, gva) - && !permission_fault(vcpu->arch.walk_mmu, vcpu->arch.access, access)) { + && !permission_fault(vcpu, vcpu->arch.walk_mmu, + vcpu->arch.access, access)) { *gpa = vcpu->arch.mmio_gfn << PAGE_SHIFT | (gva & (PAGE_SIZE - 1)); trace_vcpu_match_mmio(gva, *gpa, write, false); diff --git a/arch/x86/syscalls/Makefile b/arch/x86/syscalls/Makefile index f325af26107c..3323c2745248 100644 --- a/arch/x86/syscalls/Makefile +++ b/arch/x86/syscalls/Makefile @@ -54,5 +54,7 @@ syshdr-$(CONFIG_X86_64) += syscalls_64.h targets += $(uapisyshdr-y) $(syshdr-y) +PHONY += all all: $(addprefix $(uapi)/,$(uapisyshdr-y)) all: $(addprefix $(out)/,$(syshdr-y)) + @: diff --git a/arch/x86/syscalls/syscall_32.tbl b/arch/x86/syscalls/syscall_32.tbl index 96bc506ac6de..d6b867921612 100644 --- a/arch/x86/syscalls/syscall_32.tbl +++ b/arch/x86/syscalls/syscall_32.tbl @@ -359,3 +359,4 @@ 350 i386 finit_module sys_finit_module 351 i386 sched_setattr sys_sched_setattr 352 i386 sched_getattr sys_sched_getattr +353 i386 renameat2 sys_renameat2 diff --git a/arch/x86/tools/Makefile b/arch/x86/tools/Makefile index e8120346903b..604a37efd4d5 100644 --- a/arch/x86/tools/Makefile +++ b/arch/x86/tools/Makefile @@ -40,4 +40,6 @@ $(obj)/insn_sanity.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/ina HOST_EXTRACFLAGS += -I$(srctree)/tools/include hostprogs-y += relocs relocs-objs := relocs_32.o relocs_64.o relocs_common.o +PHONY += relocs relocs: $(obj)/relocs + @: diff --git a/arch/x86/vdso/vdso-layout.lds.S b/arch/x86/vdso/vdso-layout.lds.S index 2e263f367b13..9df017ab2285 100644 --- a/arch/x86/vdso/vdso-layout.lds.S +++ b/arch/x86/vdso/vdso-layout.lds.S @@ -9,12 +9,9 @@ SECTIONS #ifdef BUILD_VDSO32 #include <asm/vdso32.h> - .hpet_sect : { - hpet_page = . - VDSO_OFFSET(VDSO_HPET_PAGE); - } :text :hpet_sect + hpet_page = . - VDSO_OFFSET(VDSO_HPET_PAGE); - .vvar_sect : { - vvar = . - VDSO_OFFSET(VDSO_VVAR_PAGE); + vvar = . - VDSO_OFFSET(VDSO_VVAR_PAGE); /* Place all vvars at the offsets in asm/vvar.h. */ #define EMIT_VVAR(name, offset) vvar_ ## name = vvar + offset; @@ -22,7 +19,6 @@ SECTIONS #include <asm/vvar.h> #undef __VVAR_KERNEL_LDS #undef EMIT_VVAR - } :text :vvar_sect #endif . = SIZEOF_HEADERS; @@ -61,7 +57,12 @@ SECTIONS */ . = ALIGN(0x100); - .text : { *(.text*) } :text =0x90909090 + .text : { *(.text*) } :text =0x90909090, + + /* + * The comma above works around a bug in gold: + * https://sourceware.org/bugzilla/show_bug.cgi?id=16804 + */ /DISCARD/ : { *(.discard) @@ -84,8 +85,4 @@ PHDRS dynamic PT_DYNAMIC FLAGS(4); /* PF_R */ note PT_NOTE FLAGS(4); /* PF_R */ eh_frame_hdr PT_GNU_EH_FRAME; -#ifdef BUILD_VDSO32 - vvar_sect PT_NULL FLAGS(4); /* PF_R */ - hpet_sect PT_NULL FLAGS(4); /* PF_R */ -#endif } diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index a18eadd8bb40..7005974c3ff3 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -441,10 +441,11 @@ static int xen_cpu_up(unsigned int cpu, struct task_struct *idle) irq_ctx_init(cpu); #else clear_tsk_thread_flag(idle, TIF_FORK); +#endif per_cpu(kernel_stack, cpu) = (unsigned long)task_stack_page(idle) - KERNEL_STACK_OFFSET + THREAD_SIZE; -#endif + xen_setup_runstate_info(cpu); xen_setup_timer(cpu); xen_init_lock_cpu(cpu); diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c index 4d3acc34a998..0ba5f3b967f0 100644 --- a/arch/x86/xen/spinlock.c +++ b/arch/x86/xen/spinlock.c @@ -274,7 +274,7 @@ void __init xen_init_spinlocks(void) printk(KERN_DEBUG "xen: PV spinlocks disabled\n"); return; } - + printk(KERN_DEBUG "xen: PV spinlocks enabled\n"); pv_lock_ops.lock_spinning = PV_CALLEE_SAVE(xen_lock_spinning); pv_lock_ops.unlock_kick = xen_unlock_kick; } @@ -290,6 +290,9 @@ static __init int xen_init_spinlocks_jump(void) if (!xen_pvspin) return 0; + if (!xen_domain()) + return 0; + static_key_slow_inc(¶virt_ticketlocks_enabled); return 0; } diff --git a/arch/x86/xen/xen-asm_32.S b/arch/x86/xen/xen-asm_32.S index 33ca6e42a4ca..fd92a64d748e 100644 --- a/arch/x86/xen/xen-asm_32.S +++ b/arch/x86/xen/xen-asm_32.S @@ -75,6 +75,17 @@ ENDPROC(xen_sysexit) * stack state in whatever form its in, we keep things simple by only * using a single register which is pushed/popped on the stack. */ + +.macro POP_FS +1: + popw %fs +.pushsection .fixup, "ax" +2: movw $0, (%esp) + jmp 1b +.popsection + _ASM_EXTABLE(1b,2b) +.endm + ENTRY(xen_iret) /* test eflags for special cases */ testl $(X86_EFLAGS_VM | XEN_EFLAGS_NMI), 8(%esp) @@ -83,15 +94,13 @@ ENTRY(xen_iret) push %eax ESP_OFFSET=4 # bytes pushed onto stack - /* - * Store vcpu_info pointer for easy access. Do it this way to - * avoid having to reload %fs - */ + /* Store vcpu_info pointer for easy access */ #ifdef CONFIG_SMP - GET_THREAD_INFO(%eax) - movl %ss:TI_cpu(%eax), %eax - movl %ss:__per_cpu_offset(,%eax,4), %eax - mov %ss:xen_vcpu(%eax), %eax + pushw %fs + movl $(__KERNEL_PERCPU), %eax + movl %eax, %fs + movl %fs:xen_vcpu, %eax + POP_FS #else movl %ss:xen_vcpu, %eax #endif |