diff options
Diffstat (limited to 'arch')
2562 files changed, 70816 insertions, 44723 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index 4b0669cbb3b0..2505740b81d2 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -30,6 +30,10 @@ config OPROFILE_EVENT_MULTIPLEX config HAVE_OPROFILE bool +config OPROFILE_NMI_TIMER + def_bool y + depends on PERF_EVENTS && HAVE_PERF_EVENTS_NMI + config KPROBES bool "Kprobes" depends on MODULES diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 3d74801a4015..56a4df952fb0 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -70,10 +70,6 @@ config GENERIC_ISA_DMA bool default y -config GENERIC_IOMAP - bool - default n - source "init/Kconfig" source "kernel/Kconfig.freezer" @@ -319,6 +315,7 @@ config ISA_DMA_API config PCI bool depends on !ALPHA_JENSEN + select GENERIC_PCI_IOMAP default y help Find out whether you have a PCI motherboard. PCI is the name of a diff --git a/arch/alpha/include/asm/ipcbuf.h b/arch/alpha/include/asm/ipcbuf.h index d9c0e1a50702..84c7e51cb6d0 100644 --- a/arch/alpha/include/asm/ipcbuf.h +++ b/arch/alpha/include/asm/ipcbuf.h @@ -1,28 +1 @@ -#ifndef _ALPHA_IPCBUF_H -#define _ALPHA_IPCBUF_H - -/* - * The ipc64_perm structure for alpha architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit seq - * - 2 miscellaneous 64-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid_t uid; - __kernel_gid_t gid; - __kernel_uid_t cuid; - __kernel_gid_t cgid; - __kernel_mode_t mode; - unsigned short seq; - unsigned short __pad1; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _ALPHA_IPCBUF_H */ +#include <asm-generic/ipcbuf.h> diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h index 06edfefc3373..082355f159e6 100644 --- a/arch/alpha/include/asm/socket.h +++ b/arch/alpha/include/asm/socket.h @@ -69,6 +69,9 @@ #define SO_RXQ_OVFL 40 +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS + /* O_NONBLOCK clashes with the bits used for socket types. Therefore we * have to define SOCK_NONBLOCK to a different value here. */ diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h index ff73db022342..28335bd40e40 100644 --- a/arch/alpha/include/asm/thread_info.h +++ b/arch/alpha/include/asm/thread_info.h @@ -79,7 +79,6 @@ register struct thread_info *__current_thread_info __asm__("$8"); #define TIF_UAC_SIGBUS 12 /* ! userspace part of 'osf_sysinfo' */ #define TIF_MEMDIE 13 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 14 /* restore signal mask in do_signal */ -#define TIF_FREEZE 16 /* is freezing for suspend */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_SIGPENDING (1<<TIF_SIGPENDING) @@ -87,7 +86,6 @@ register struct thread_info *__current_thread_info __asm__("$8"); #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) #define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) -#define _TIF_FREEZE (1<<TIF_FREEZE) /* Work to do on interrupt/exception return. */ #define _TIF_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \ diff --git a/arch/alpha/include/asm/types.h b/arch/alpha/include/asm/types.h index 881544339c21..0a0579076f4a 100644 --- a/arch/alpha/include/asm/types.h +++ b/arch/alpha/include/asm/types.h @@ -15,9 +15,4 @@ #include <asm-generic/int-l64.h> #endif -#ifndef __ASSEMBLY__ - -typedef unsigned int umode_t; - -#endif /* __ASSEMBLY__ */ #endif /* _ALPHA_TYPES_H */ diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c index 246100ef07c2..04eea4894ef3 100644 --- a/arch/alpha/kernel/pci-noop.c +++ b/arch/alpha/kernel/pci-noop.c @@ -185,15 +185,3 @@ struct dma_map_ops alpha_noop_ops = { struct dma_map_ops *dma_ops = &alpha_noop_ops; EXPORT_SYMBOL(dma_ops); - -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) -{ - return NULL; -} - -void pci_iounmap(struct pci_dev *dev, void __iomem * addr) -{ -} - -EXPORT_SYMBOL(pci_iomap); -EXPORT_SYMBOL(pci_iounmap); diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index c9ab94ee1ca8..8c723c1b086a 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -281,27 +281,9 @@ pcibios_fixup_device_resources(struct pci_dev *dev, struct pci_bus *bus) void __devinit pcibios_fixup_bus(struct pci_bus *bus) { - /* Propagate hose info into the subordinate devices. */ - - struct pci_controller *hose = bus->sysdata; struct pci_dev *dev = bus->self; - if (!dev) { - /* Root bus. */ - u32 pci_mem_end; - u32 sg_base = hose->sg_pci ? hose->sg_pci->dma_base : ~0; - unsigned long end; - - bus->resource[0] = hose->io_space; - bus->resource[1] = hose->mem_space; - - /* Adjust hose mem_space limit to prevent PCI allocations - in the iommu windows. */ - pci_mem_end = min((u32)__direct_map_base, sg_base) - 1; - end = hose->mem_space->start + pci_mem_end; - if (hose->mem_space->end > end) - hose->mem_space->end = end; - } else if (pci_probe_only && + if (pci_probe_only && dev && (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { pci_read_bridge_bases(bus); pcibios_fixup_device_resources(dev, bus); @@ -414,13 +396,31 @@ void __init common_init_pci(void) { struct pci_controller *hose; + struct list_head resources; struct pci_bus *bus; int next_busno; int need_domain_info = 0; + u32 pci_mem_end; + u32 sg_base; + unsigned long end; /* Scan all of the recorded PCI controllers. */ for (next_busno = 0, hose = hose_head; hose; hose = hose->next) { - bus = pci_scan_bus(next_busno, alpha_mv.pci_ops, hose); + sg_base = hose->sg_pci ? hose->sg_pci->dma_base : ~0; + + /* Adjust hose mem_space limit to prevent PCI allocations + in the iommu windows. */ + pci_mem_end = min((u32)__direct_map_base, sg_base) - 1; + end = hose->mem_space->start + pci_mem_end; + if (hose->mem_space->end > end) + hose->mem_space->end = end; + + INIT_LIST_HEAD(&resources); + pci_add_resource(&resources, hose->io_space); + pci_add_resource(&resources, hose->mem_space); + + bus = pci_scan_root_bus(NULL, next_busno, alpha_mv.pci_ops, + hose, &resources); hose->bus = bus; hose->need_domain_info = need_domain_info; next_busno = bus->subordinate + 1; @@ -508,30 +508,7 @@ sys_pciconfig_iobase(long which, unsigned long bus, unsigned long dfn) return -EOPNOTSUPP; } -/* Create an __iomem token from a PCI BAR. Copied from lib/iomap.c with - no changes, since we don't want the other things in that object file. */ - -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (!len || !start) - return NULL; - if (maxlen && len > maxlen) - len = maxlen; - if (flags & IORESOURCE_IO) - return ioport_map(start, len); - if (flags & IORESOURCE_MEM) { - /* Not checking IORESOURCE_CACHEABLE because alpha does - not distinguish between ioremap and ioremap_nocache. */ - return ioremap(start, len); - } - return NULL; -} - -/* Destroy that token. Not copied from lib/iomap.c. */ +/* Destroy an __iomem token. Not copied from lib/iomap.c. */ void pci_iounmap(struct pci_dev *dev, void __iomem * addr) { @@ -539,7 +516,6 @@ void pci_iounmap(struct pci_dev *dev, void __iomem * addr) iounmap(addr); } -EXPORT_SYMBOL(pci_iomap); EXPORT_SYMBOL(pci_iounmap); /* FIXME: Some boxes have multiple ISA bridges! */ diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e084b7e981e8..24626b0419ee 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -16,6 +16,7 @@ config ARM select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) + select ARCH_BINFMT_ELF_RANDOMIZE_PIE select HAVE_GENERIC_DMA_COHERENT select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZO @@ -30,6 +31,7 @@ config ARM select HAVE_SPARSE_IRQ select GENERIC_IRQ_SHOW select CPU_PM if (SUSPEND || CPU_IDLE) + select GENERIC_PCI_IOMAP help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -220,8 +222,9 @@ config NEED_MACH_MEMORY_H be avoided when possible. config PHYS_OFFSET - hex "Physical address of main memory" + hex "Physical address of main memory" if MMU depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H + default DRAM_BASE if !MMU help Please provide the physical address corresponding to the location of main memory in your system. @@ -257,6 +260,7 @@ config ARCH_INTEGRATOR select ARCH_HAS_CPUFREQ select CLKDEV_LOOKUP select HAVE_MACH_CLKDEV + select HAVE_TCM select ICST select GENERIC_CLOCKEVENTS select PLAT_VERSATILE @@ -340,10 +344,12 @@ config ARCH_HIGHBANK select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 + select CACHE_L2X0 select CLKDEV_LOOKUP select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU + select HAVE_SMP select USE_OF help Support for the Calxeda Highbank SoC based boards. @@ -361,6 +367,7 @@ config ARCH_CNS3XXX select CPU_V6K select GENERIC_CLOCKEVENTS select ARM_GIC + select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI help @@ -381,6 +388,7 @@ config ARCH_PRIMA2 select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP + select MIGHT_HAVE_CACHE_L2X0 select USE_OF select ZONE_DMA help @@ -441,6 +449,7 @@ config ARCH_MXS select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO + select HAVE_CLK_PREPARE help Support for Freescale MXS-based family of processors @@ -591,6 +600,7 @@ config ARCH_MMP select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS + select GPIO_PXA select HAVE_SCHED_CLOCK select TICK_ONESHOT select PLAT_PXA @@ -633,6 +643,8 @@ config ARCH_TEGRA select GENERIC_GPIO select HAVE_CLK select HAVE_SCHED_CLOCK + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 select ARCH_HAS_CPUFREQ help This enables support for NVIDIA Tegra based systems (Tegra APX, @@ -650,6 +662,7 @@ config ARCH_PICOXCELL select HAVE_SCHED_CLOCK select HAVE_TCM select NO_IOPORT + select SPARSE_IRQ select USE_OF help This enables support for systems based on the Picochip picoXcell @@ -673,6 +686,7 @@ config ARCH_PXA select CLKSRC_MMIO select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS + select GPIO_PXA select HAVE_SCHED_CLOCK select TICK_ONESHOT select PLAT_PXA @@ -702,7 +716,9 @@ config ARCH_SHMOBILE select HAVE_CLK select CLKDEV_LOOKUP select HAVE_MACH_CLKDEV + select HAVE_SMP select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_CACHE_L2X0 select NO_IOPORT select SPARSE_IRQ select MULTI_IRQ_HANDLER @@ -738,7 +754,7 @@ config ARCH_SA1100 select ARCH_HAS_CPUFREQ select CPU_FREQ select GENERIC_CLOCKEVENTS - select HAVE_CLK + select CLKDEV_LOOKUP select HAVE_SCHED_CLOCK select TICK_ONESHOT select ARCH_REQUIRE_GPIOLIB @@ -867,16 +883,6 @@ config ARCH_SHARK Support for the StrongARM based Digital DNARD machine, also known as "Shark" (<http://www.shark-linux.de/shark.html>). -config ARCH_TCC_926 - bool "Telechips TCC ARM926-based systems" - select CLKSRC_MMIO - select CPU_ARM926T - select HAVE_CLK - select CLKDEV_LOOKUP - select GENERIC_CLOCKEVENTS - help - Support for Telechips TCC ARM926-based systems. - config ARCH_U300 bool "ST-Ericsson U300 Series" depends on MMU @@ -892,7 +898,6 @@ config ARCH_U300 select HAVE_MACH_CLKDEV select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB - select NEED_MACH_MEMORY_H help Support for ST-Ericsson U300 series mobile platforms. @@ -904,6 +909,8 @@ config ARCH_U8500 select CLKDEV_LOOKUP select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_CPUFREQ + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 help Support for ST-Ericsson's Ux500 architecture @@ -914,6 +921,7 @@ config ARCH_NOMADIK select CPU_ARM926T select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_CACHE_L2X0 select ARCH_REQUIRE_GPIOLIB help Support for the Nomadik platform by ST-Ericsson @@ -973,6 +981,7 @@ config ARCH_ZYNQ select ARM_GIC select ARM_AMBA select ICST + select MIGHT_HAVE_CACHE_L2X0 select USE_OF help Support for Xilinx Zynq ARM Cortex A9 Platform @@ -1059,8 +1068,6 @@ source "arch/arm/plat-s5p/Kconfig" source "arch/arm/plat-spear/Kconfig" -source "arch/arm/plat-tcc/Kconfig" - if ARCH_S3C2410 source "arch/arm/mach-s3c2410/Kconfig" source "arch/arm/mach-s3c2412/Kconfig" @@ -1125,6 +1132,11 @@ config ARM_TIMER_SP804 source arch/arm/mm/Kconfig +config ARM_NR_BANKS + int + default 16 if ARCH_EP93XX + default 8 + config IWMMXT bool "Enable iWMMXt support" depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 @@ -1133,10 +1145,9 @@ config IWMMXT Enable support for iWMMXt context switching at run time if running on a CPU that supports it. -# bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER config XSCALE_PMU bool - depends on CPU_XSCALE && !XSCALE_PMU_TIMER + depends on CPU_XSCALE default y config CPU_HAS_PMU @@ -1245,7 +1256,7 @@ config PL310_ERRATA_588369 config ARM_ERRATA_720789 bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID" - depends on CPU_V7 && SMP + depends on CPU_V7 help This option enables the workaround for the 720789 Cortex-A9 (prior to r2p0) erratum. A faulty ASID can be sent to the other CPUs for the @@ -1281,7 +1292,7 @@ config ARM_ERRATA_743622 config ARM_ERRATA_751472 bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation" - depends on CPU_V7 && SMP + depends on CPU_V7 help This option enables the workaround for the 751472 Cortex-A9 (prior to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the @@ -1434,14 +1445,20 @@ menu "Kernel Features" source "kernel/time/Kconfig" +config HAVE_SMP + bool + help + This option should be selected by machines which have an SMP- + capable CPU. + + The only effect of this option is to make the SMP-related + options available to the user for configuration. + config SMP bool "Symmetric Multi-Processing" depends on CPU_V6K || CPU_V7 depends on GENERIC_CLOCKEVENTS - depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \ - MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ - ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \ - ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q + depends on HAVE_SMP depends on MMU select USE_GENERIC_SMP_HELPERS select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP @@ -1559,6 +1576,16 @@ config LOCAL_TIMERS accounting to be spread across the timer interval, preventing a "thundering herd" at every timer tick. +config ARCH_NR_GPIO + int + default 1024 if ARCH_SHMOBILE || ARCH_TEGRA + default 350 if ARCH_U8500 + default 0 + help + Maximum number of GPIOs in the system. + + If unsure, leave the default value. + source kernel/Kconfig.preempt config HZ @@ -1971,7 +1998,7 @@ endchoice config XIP_KERNEL bool "Kernel Execute-In-Place from ROM" - depends on !ZBOOT_ROM + depends on !ZBOOT_ROM && !ARM_LPAE help Execute-In-Place allows the kernel to run from non-volatile storage directly addressable by the CPU, such as NOR flash. This saves RAM @@ -2001,7 +2028,7 @@ config XIP_PHYS_ADDR config KEXEC bool "Kexec system call (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on EXPERIMENTAL && (!SMP || HOTPLUG_CPU) help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index c5213e78606b..e0d236d7ff73 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -100,6 +100,14 @@ choice Note that the system will appear to hang during boot if there is nothing connected to read from the DCC. + config AT91_DEBUG_LL_DBGU0 + bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl" + depends on HAVE_AT91_DBGU0 + + config AT91_DEBUG_LL_DBGU1 + bool "Kernel low-level debugging on 9263, 9g45 and cap9" + depends on HAVE_AT91_DBGU1 + config DEBUG_FOOTBRIDGE_COM1 bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" depends on FOOTBRIDGE @@ -247,6 +255,43 @@ choice their output to the standard serial port on the RealView PB1176 platform. + config DEBUG_MSM_UART1 + bool "Kernel low-level debugging messages via MSM UART1" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + help + Say Y here if you want the debug print routines to direct + their output to the first serial port on MSM devices. + + config DEBUG_MSM_UART2 + bool "Kernel low-level debugging messages via MSM UART2" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + help + Say Y here if you want the debug print routines to direct + their output to the second serial port on MSM devices. + + config DEBUG_MSM_UART3 + bool "Kernel low-level debugging messages via MSM UART3" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + help + Say Y here if you want the debug print routines to direct + their output to the third serial port on MSM devices. + + config DEBUG_MSM8660_UART + bool "Kernel low-level debugging messages via MSM 8660 UART" + depends on ARCH_MSM8X60 + select MSM_HAS_DEBUG_UART_HS + help + Say Y here if you want the debug print routines to direct + their output to the serial port on MSM 8660 devices. + + config DEBUG_MSM8960_UART + bool "Kernel low-level debugging messages via MSM 8960 UART" + depends on ARCH_MSM8960 + select MSM_HAS_DEBUG_UART_HS + help + Say Y here if you want the debug print routines to direct + their output to the serial port on MSM 8960 devices. + endchoice config EARLY_PRINTK diff --git a/arch/arm/Makefile b/arch/arm/Makefile index dfcf3b033e10..40319d91bb7f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -184,7 +184,6 @@ machine-$(CONFIG_ARCH_EXYNOS4) := exynos machine-$(CONFIG_ARCH_SA1100) := sa1100 machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_SHMOBILE) := shmobile -machine-$(CONFIG_ARCH_TCC8K) := tcc8k machine-$(CONFIG_ARCH_TEGRA) := tegra machine-$(CONFIG_ARCH_U300) := u300 machine-$(CONFIG_ARCH_U8500) := ux500 @@ -204,7 +203,6 @@ machine-$(CONFIG_ARCH_ZYNQ) := zynq plat-$(CONFIG_ARCH_MXC) := mxc plat-$(CONFIG_ARCH_OMAP) := omap plat-$(CONFIG_ARCH_S3C64XX) := samsung -plat-$(CONFIG_ARCH_TCC_926) := tcc plat-$(CONFIG_ARCH_ZYNQ) := versatile plat-$(CONFIG_PLAT_IOP) := iop plat-$(CONFIG_PLAT_NOMADIK) := nomadik diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 21f56ff32797..cf0a64ce4b83 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -126,7 +126,8 @@ ccflags-y := -fpic -fno-builtin -I$(obj) asflags-y := -Wa,-march=all # Supply kernel BSS size to the decompressor via a linker symbol. -KBSS_SZ = $(shell size $(obj)/../../../../vmlinux | awk 'END{print $$3}') +KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \ + awk 'END{print $$3}') LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ) # Supply ZRELADDR to the decompressor via a linker symbol. ifneq ($(CONFIG_AUTO_ZRELADDR),y) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index c2effc917254..c5d60250d43d 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -659,6 +659,7 @@ __armv7_mmu_cache_on: mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer mcrne p15, 0, r1, c3, c0, 0 @ load domain access control #endif + mcr p15, 0, r0, c7, c5, 4 @ ISB mcr p15, 0, r0, c1, c0, 0 @ load control register mrc p15, 0, r0, c1, c0, 0 @ and read it back mov r0, #0 diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index aeef04269cf8..07603b8c9503 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -114,6 +114,13 @@ atmel,use-dma-tx; status = "disabled"; }; + + macb0: ethernet@fffc4000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xfffc4000 0x100>; + interrupts = <21>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index db6a45202f26..fffa005300a4 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -101,6 +101,13 @@ atmel,use-dma-tx; status = "disabled"; }; + + macb0: ethernet@fffbc000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xfffbc000 0x100>; + interrupts = <25>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 85b34f59cd82..a387e7704ce1 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -30,6 +30,11 @@ usart1: serial@fff90000 { status = "okay"; }; + + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts new file mode 100644 index 000000000000..b8c476384eef --- /dev/null +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -0,0 +1,137 @@ +/* + * Samsung's Exynos4210 based Origen board device tree source + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * Device tree source file for Insignal's Origen board which is based on + * Samsung's Exynos4210 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4210.dtsi" + +/ { + model = "Insignal Origen evaluation board based on Exynos4210"; + compatible = "insignal,origen", "samsung,exynos4210"; + + memory { + reg = <0x40000000 0x40000000>; + }; + + chosen { + bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; + }; + + sdhci@12530000 { + samsung,sdhci-bus-width = <4>; + linux,mmc_cap_4_bit_data; + samsung,sdhci-cd-internal; + gpio-cd = <&gpk2 2 2 3 3>; + gpios = <&gpk2 0 2 0 3>, + <&gpk2 1 2 0 3>, + <&gpk2 3 2 3 3>, + <&gpk2 4 2 3 3>, + <&gpk2 5 2 3 3>, + <&gpk2 6 2 3 3>; + }; + + sdhci@12510000 { + samsung,sdhci-bus-width = <4>; + linux,mmc_cap_4_bit_data; + samsung,sdhci-cd-internal; + gpio-cd = <&gpk0 2 2 3 3>; + gpios = <&gpk0 0 2 0 3>, + <&gpk0 1 2 0 3>, + <&gpk0 3 2 3 3>, + <&gpk0 4 2 3 3>, + <&gpk0 5 2 3 3>, + <&gpk0 6 2 3 3>; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + up { + label = "Up"; + gpios = <&gpx2 0 0 0 2>; + linux,code = <103>; + }; + + down { + label = "Down"; + gpios = <&gpx2 1 0 0 2>; + linux,code = <108>; + }; + + back { + label = "Back"; + gpios = <&gpx1 7 0 0 2>; + linux,code = <158>; + }; + + home { + label = "Home"; + gpios = <&gpx1 6 0 0 2>; + linux,code = <102>; + }; + + menu { + label = "Menu"; + gpios = <&gpx1 5 0 0 2>; + linux,code = <139>; + }; + }; + + keypad@100A0000 { + status = "disabled"; + }; + + sdhci@12520000 { + status = "disabled"; + }; + + sdhci@12540000 { + status = "disabled"; + }; + + i2c@13860000 { + status = "disabled"; + }; + + i2c@13870000 { + status = "disabled"; + }; + + i2c@13880000 { + status = "disabled"; + }; + + i2c@13890000 { + status = "disabled"; + }; + + i2c@138A0000 { + status = "disabled"; + }; + + i2c@138B0000 { + status = "disabled"; + }; + + i2c@138C0000 { + status = "disabled"; + }; + + i2c@138D0000 { + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts new file mode 100644 index 000000000000..27afc8e535ca --- /dev/null +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -0,0 +1,182 @@ +/* + * Samsung's Exynos4210 based SMDKV310 board device tree source + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * Device tree source file for Samsung's SMDKV310 board which is based on + * Samsung's Exynos4210 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4210.dtsi" + +/ { + model = "Samsung smdkv310 evaluation board based on Exynos4210"; + compatible = "samsung,smdkv310", "samsung,exynos4210"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; + }; + + sdhci@12530000 { + samsung,sdhci-bus-width = <4>; + linux,mmc_cap_4_bit_data; + samsung,sdhci-cd-internal; + gpio-cd = <&gpk2 2 2 3 3>; + gpios = <&gpk2 0 2 0 3>, + <&gpk2 1 2 0 3>, + <&gpk2 3 2 3 3>, + <&gpk2 4 2 3 3>, + <&gpk2 5 2 3 3>, + <&gpk2 6 2 3 3>; + }; + + keypad@100A0000 { + samsung,keypad-num-rows = <2>; + samsung,keypad-num-columns = <8>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + + row-gpios = <&gpx2 0 3 3 0>, + <&gpx2 1 3 3 0>; + + col-gpios = <&gpx1 0 3 0 0>, + <&gpx1 1 3 0 0>, + <&gpx1 2 3 0 0>, + <&gpx1 3 3 0 0>, + <&gpx1 4 3 0 0>, + <&gpx1 5 3 0 0>, + <&gpx1 6 3 0 0>, + <&gpx1 7 3 0 0>; + + key_1 { + keypad,row = <0>; + keypad,column = <3>; + linux,code = <2>; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <4>; + linux,code = <3>; + }; + + key_3 { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <4>; + }; + + key_4 { + keypad,row = <0>; + keypad,column = <6>; + linux,code = <5>; + }; + + key_5 { + keypad,row = <0>; + keypad,column = <7>; + linux,code = <6>; + }; + + key_a { + keypad,row = <1>; + keypad,column = <3>; + linux,code = <30>; + }; + + key_b { + keypad,row = <1>; + keypad,column = <4>; + linux,code = <48>; + }; + + key_c { + keypad,row = <1>; + keypad,column = <5>; + linux,code = <46>; + }; + + key_d { + keypad,row = <1>; + keypad,column = <6>; + linux,code = <32>; + }; + + key_e { + keypad,row = <1>; + keypad,column = <7>; + linux,code = <18>; + }; + }; + + i2c@13860000 { + #address-cells = <1>; + #size-cells = <0>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + gpios = <&gpd1 0 2 3 0>, + <&gpd1 1 2 3 0>; + + eeprom@50 { + compatible = "samsung,24ad0xd1"; + reg = <0x50>; + }; + + eeprom@52 { + compatible = "samsung,24ad0xd1"; + reg = <0x52>; + }; + }; + + sdhci@12510000 { + status = "disabled"; + }; + + sdhci@12520000 { + status = "disabled"; + }; + + sdhci@12540000 { + status = "disabled"; + }; + + i2c@13870000 { + status = "disabled"; + }; + + i2c@13880000 { + status = "disabled"; + }; + + i2c@13890000 { + status = "disabled"; + }; + + i2c@138A0000 { + status = "disabled"; + }; + + i2c@138B0000 { + status = "disabled"; + }; + + i2c@138C0000 { + status = "disabled"; + }; + + i2c@138D0000 { + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi new file mode 100644 index 000000000000..63d7578856c1 --- /dev/null +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -0,0 +1,397 @@ +/* + * Samsung's Exynos4210 SoC device tree source + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/include/ "skeleton.dtsi" + +/ { + compatible = "samsung,exynos4210"; + interrupt-parent = <&gic>; + + gic:interrupt-controller@10490000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10490000 0x1000>, <0x10480000 0x100>; + }; + + watchdog@10060000 { + compatible = "samsung,s3c2410-wdt"; + reg = <0x10060000 0x100>; + interrupts = <0 43 0>; + }; + + rtc@10070000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupts = <0 44 0>, <0 45 0>; + }; + + keypad@100A0000 { + compatible = "samsung,s5pv210-keypad"; + reg = <0x100A0000 0x100>; + interrupts = <0 109 0>; + }; + + sdhci@12510000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12510000 0x100>; + interrupts = <0 73 0>; + }; + + sdhci@12520000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12520000 0x100>; + interrupts = <0 74 0>; + }; + + sdhci@12530000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12530000 0x100>; + interrupts = <0 75 0>; + }; + + sdhci@12540000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12540000 0x100>; + interrupts = <0 76 0>; + }; + + serial@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x100>; + interrupts = <0 52 0>; + }; + + serial@13810000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13810000 0x100>; + interrupts = <0 53 0>; + }; + + serial@13820000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13820000 0x100>; + interrupts = <0 54 0>; + }; + + serial@13830000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13830000 0x100>; + interrupts = <0 55 0>; + }; + + i2c@13860000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13860000 0x100>; + interrupts = <0 58 0>; + }; + + i2c@13870000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13870000 0x100>; + interrupts = <0 59 0>; + }; + + i2c@13880000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13880000 0x100>; + interrupts = <0 60 0>; + }; + + i2c@13890000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13890000 0x100>; + interrupts = <0 61 0>; + }; + + i2c@138A0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x138A0000 0x100>; + interrupts = <0 62 0>; + }; + + i2c@138B0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x138B0000 0x100>; + interrupts = <0 63 0>; + }; + + i2c@138C0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x138C0000 0x100>; + interrupts = <0 64 0>; + }; + + i2c@138D0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x138D0000 0x100>; + interrupts = <0 65 0>; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <0 35 0>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = <0 36 0>; + }; + }; + + gpio-controllers { + #address-cells = <1>; + #size-cells = <1>; + gpio-controller; + ranges; + + gpa0: gpio-controller@11400000 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400000 0x20>; + #gpio-cells = <4>; + }; + + gpa1: gpio-controller@11400020 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400020 0x20>; + #gpio-cells = <4>; + }; + + gpb: gpio-controller@11400040 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400040 0x20>; + #gpio-cells = <4>; + }; + + gpc0: gpio-controller@11400060 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400060 0x20>; + #gpio-cells = <4>; + }; + + gpc1: gpio-controller@11400080 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400080 0x20>; + #gpio-cells = <4>; + }; + + gpd0: gpio-controller@114000A0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114000A0 0x20>; + #gpio-cells = <4>; + }; + + gpd1: gpio-controller@114000C0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114000C0 0x20>; + #gpio-cells = <4>; + }; + + gpe0: gpio-controller@114000E0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114000E0 0x20>; + #gpio-cells = <4>; + }; + + gpe1: gpio-controller@11400100 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400100 0x20>; + #gpio-cells = <4>; + }; + + gpe2: gpio-controller@11400120 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400120 0x20>; + #gpio-cells = <4>; + }; + + gpe3: gpio-controller@11400140 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400140 0x20>; + #gpio-cells = <4>; + }; + + gpe4: gpio-controller@11400160 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400160 0x20>; + #gpio-cells = <4>; + }; + + gpf0: gpio-controller@11400180 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400180 0x20>; + #gpio-cells = <4>; + }; + + gpf1: gpio-controller@114001A0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114001A0 0x20>; + #gpio-cells = <4>; + }; + + gpf2: gpio-controller@114001C0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114001C0 0x20>; + #gpio-cells = <4>; + }; + + gpf3: gpio-controller@114001E0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114001E0 0x20>; + #gpio-cells = <4>; + }; + + gpj0: gpio-controller@11000000 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000000 0x20>; + #gpio-cells = <4>; + }; + + gpj1: gpio-controller@11000020 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000020 0x20>; + #gpio-cells = <4>; + }; + + gpk0: gpio-controller@11000040 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000040 0x20>; + #gpio-cells = <4>; + }; + + gpk1: gpio-controller@11000060 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000060 0x20>; + #gpio-cells = <4>; + }; + + gpk2: gpio-controller@11000080 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000080 0x20>; + #gpio-cells = <4>; + }; + + gpk3: gpio-controller@110000A0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x110000A0 0x20>; + #gpio-cells = <4>; + }; + + gpl0: gpio-controller@110000C0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x110000C0 0x20>; + #gpio-cells = <4>; + }; + + gpl1: gpio-controller@110000E0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x110000E0 0x20>; + #gpio-cells = <4>; + }; + + gpl2: gpio-controller@11000100 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000100 0x20>; + #gpio-cells = <4>; + }; + + gpy0: gpio-controller@11000120 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000120 0x20>; + #gpio-cells = <4>; + }; + + gpy1: gpio-controller@11000140 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000140 0x20>; + #gpio-cells = <4>; + }; + + gpy2: gpio-controller@11000160 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000160 0x20>; + #gpio-cells = <4>; + }; + + gpy3: gpio-controller@11000180 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000180 0x20>; + #gpio-cells = <4>; + }; + + gpy4: gpio-controller@110001A0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x110001A0 0x20>; + #gpio-cells = <4>; + }; + + gpy5: gpio-controller@110001C0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x110001C0 0x20>; + #gpio-cells = <4>; + }; + + gpy6: gpio-controller@110001E0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x110001E0 0x20>; + #gpio-cells = <4>; + }; + + gpx0: gpio-controller@11000C00 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000C00 0x20>; + #gpio-cells = <4>; + }; + + gpx1: gpio-controller@11000C20 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000C20 0x20>; + #gpio-cells = <4>; + }; + + gpx2: gpio-controller@11000C40 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000C40 0x20>; + #gpio-cells = <4>; + }; + + gpx3: gpio-controller@11000C60 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000C60 0x20>; + #gpio-cells = <4>; + }; + + gpz: gpio-controller@03860000 { + compatible = "samsung,exynos4-gpio"; + reg = <0x03860000 0x20>; + #gpio-cells = <4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index aeb1a7578fad..305635bd45c0 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -194,5 +194,17 @@ reg = <0xfff3d000 0x1000>; interrupts = <0 92 4>; }; + + ethernet@fff50000 { + compatible = "calxeda,hb-xgmac"; + reg = <0xfff50000 0x1000>; + interrupts = <0 77 4 0 78 4 0 79 4>; + }; + + ethernet@fff51000 { + compatible = "calxeda,hb-xgmac"; + reg = <0xfff51000 0x1000>; + interrupts = <0 80 4 0 81 4 0 82 4>; + }; }; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index f8766af11215..564cb8c19f15 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -35,20 +35,19 @@ }; esdhc@70008000 { /* ESDHC2 */ - cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */ - wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */ + cd-gpios = <&gpio1 6 0>; + wp-gpios = <&gpio1 5 0>; status = "okay"; }; - uart2: uart@7000c000 { /* UART3 */ + uart3: uart@7000c000 { fsl,uart-has-rtscts; status = "okay"; }; ecspi@70010000 { /* ECSPI1 */ fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */ - <&gpio3 25 0>; /* GPIO4_25 */ + cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>; status = "okay"; pmic: mc13892@0 { @@ -57,7 +56,7 @@ compatible = "fsl,mc13892"; spi-max-frequency = <6000000>; reg = <0>; - mc13xxx-irq-gpios = <&gpio0 8 0>; /* GPIO1_8 */ + mc13xxx-irq-gpios = <&gpio1 8 0>; fsl,mc13xxx-uses-regulator; }; @@ -91,12 +90,12 @@ reg = <0x73fa8000 0x4000>; }; - uart0: uart@73fbc000 { + uart1: uart@73fbc000 { fsl,uart-has-rtscts; status = "okay"; }; - uart1: uart@73fc0000 { + uart2: uart@73fc0000 { status = "okay"; }; }; @@ -127,7 +126,7 @@ power { label = "Power Button"; - gpios = <&gpio1 21 0>; + gpios = <&gpio2 21 0>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 327ab8e3a4c8..6663986fe1c8 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -14,9 +14,9 @@ / { aliases { - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; }; tzic: tz-interrupt-controller@e0000000 { @@ -86,7 +86,7 @@ status = "disabled"; }; - uart2: uart@7000c000 { /* UART3 */ + uart3: uart@7000c000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x7000c000 0x4000>; interrupts = <33>; @@ -117,7 +117,7 @@ }; }; - gpio0: gpio@73f84000 { /* GPIO1 */ + gpio1: gpio@73f84000 { compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; reg = <0x73f84000 0x4000>; interrupts = <50 51>; @@ -127,7 +127,7 @@ #interrupt-cells = <1>; }; - gpio1: gpio@73f88000 { /* GPIO2 */ + gpio2: gpio@73f88000 { compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; reg = <0x73f88000 0x4000>; interrupts = <52 53>; @@ -137,7 +137,7 @@ #interrupt-cells = <1>; }; - gpio2: gpio@73f8c000 { /* GPIO3 */ + gpio3: gpio@73f8c000 { compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; reg = <0x73f8c000 0x4000>; interrupts = <54 55>; @@ -147,7 +147,7 @@ #interrupt-cells = <1>; }; - gpio3: gpio@73f90000 { /* GPIO4 */ + gpio4: gpio@73f90000 { compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; reg = <0x73f90000 0x4000>; interrupts = <56 57>; @@ -171,14 +171,14 @@ status = "disabled"; }; - uart0: uart@73fbc000 { + uart1: uart@73fbc000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; interrupts = <31>; status = "disabled"; }; - uart1: uart@73fc0000 { + uart2: uart@73fc0000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fc0000 0x4000>; interrupts = <32>; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 2ab7f80a0a35..2dccce46ed81 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -29,8 +29,8 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ - cd-gpios = <&gpio0 1 0>; /* GPIO1_1 */ - wp-gpios = <&gpio0 9 0>; /* GPIO1_9 */ + cd-gpios = <&gpio1 1 0>; + wp-gpios = <&gpio1 9 0>; status = "okay"; }; }; @@ -44,7 +44,7 @@ reg = <0x53fa8000 0x4000>; }; - uart0: uart@53fbc000 { /* UART1 */ + uart1: uart@53fbc000 { status = "okay"; }; }; @@ -67,7 +67,7 @@ compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0xf4000000 0x2000000>; phy-mode = "mii"; - interrupt-parent = <&gpio1>; + interrupt-parent = <&gpio2>; interrupts = <31>; reg-io-width = <4>; smsc,irq-push-pull; @@ -79,34 +79,34 @@ home { label = "Home"; - gpios = <&gpio4 10 0>; /* GPIO5_10 */ + gpios = <&gpio5 10 0>; linux,code = <102>; /* KEY_HOME */ gpio-key,wakeup; }; back { label = "Back"; - gpios = <&gpio4 11 0>; /* GPIO5_11 */ + gpios = <&gpio5 11 0>; linux,code = <158>; /* KEY_BACK */ gpio-key,wakeup; }; program { label = "Program"; - gpios = <&gpio4 12 0>; /* GPIO5_12 */ + gpios = <&gpio5 12 0>; linux,code = <362>; /* KEY_PROGRAM */ gpio-key,wakeup; }; volume-up { label = "Volume Up"; - gpios = <&gpio4 13 0>; /* GPIO5_13 */ + gpios = <&gpio5 13 0>; linux,code = <115>; /* KEY_VOLUMEUP */ }; volume-down { label = "Volume Down"; - gpios = <&gpio3 0 0>; /* GPIO4_0 */ + gpios = <&gpio4 0 0>; linux,code = <114>; /* KEY_VOLUMEDOWN */ }; }; diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts index 3f3a88185ff8..5bac4aa4800b 100644 --- a/arch/arm/boot/dts/imx53-evk.dts +++ b/arch/arm/boot/dts/imx53-evk.dts @@ -29,15 +29,14 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ - cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */ - wp-gpios = <&gpio2 14 0>; /* GPIO3_14 */ + cd-gpios = <&gpio3 13 0>; + wp-gpios = <&gpio3 14 0>; status = "okay"; }; ecspi@50010000 { /* ECSPI1 */ fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */ - <&gpio2 19 0>; /* GPIO3_19 */ + cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; status = "okay"; flash: at45db321d@1 { @@ -61,8 +60,8 @@ }; esdhc@50020000 { /* ESDHC3 */ - cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */ - wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */ + cd-gpios = <&gpio3 11 0>; + wp-gpios = <&gpio3 12 0>; status = "okay"; }; }; @@ -76,7 +75,7 @@ reg = <0x53fa8000 0x4000>; }; - uart0: uart@53fbc000 { /* UART1 */ + uart1: uart@53fbc000 { status = "okay"; }; }; @@ -102,7 +101,7 @@ fec@63fec000 { phy-mode = "rmii"; - phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */ + phy-reset-gpios = <&gpio7 6 0>; status = "okay"; }; }; @@ -113,7 +112,7 @@ green { label = "Heartbeat"; - gpios = <&gpio6 7 0>; /* GPIO7_7 */ + gpios = <&gpio7 7 0>; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index ae6de6d0c3f1..5c57c8672c36 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -29,13 +29,13 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ - cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */ + cd-gpios = <&gpio3 13 0>; status = "okay"; }; esdhc@50020000 { /* ESDHC3 */ - cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */ - wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */ + cd-gpios = <&gpio3 11 0>; + wp-gpios = <&gpio3 12 0>; status = "okay"; }; }; @@ -49,7 +49,7 @@ reg = <0x53fa8000 0x4000>; }; - uart0: uart@53fbc000 { /* UART1 */ + uart1: uart@53fbc000 { status = "okay"; }; }; @@ -84,7 +84,7 @@ fec@63fec000 { phy-mode = "rmii"; - phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */ + phy-reset-gpios = <&gpio7 6 0>; status = "okay"; }; }; @@ -95,20 +95,20 @@ power { label = "Power Button"; - gpios = <&gpio0 8 0>; /* GPIO1_8 */ + gpios = <&gpio1 8 0>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; volume-up { label = "Volume Up"; - gpios = <&gpio1 14 0>; /* GPIO2_14 */ + gpios = <&gpio2 14 0>; linux,code = <115>; /* KEY_VOLUMEUP */ }; volume-down { label = "Volume Down"; - gpios = <&gpio1 15 0>; /* GPIO2_15 */ + gpios = <&gpio2 15 0>; linux,code = <114>; /* KEY_VOLUMEDOWN */ }; }; @@ -118,7 +118,7 @@ user { label = "Heartbeat"; - gpios = <&gpio6 7 0>; /* GPIO7_7 */ + gpios = <&gpio7 7 0>; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index b1c062eea715..c7ee86c2dfb5 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -29,8 +29,8 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ - cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */ - wp-gpios = <&gpio3 11 0>; /* GPIO4_11 */ + cd-gpios = <&gpio3 13 0>; + wp-gpios = <&gpio4 11 0>; status = "okay"; }; @@ -39,15 +39,14 @@ status = "okay"; }; - uart2: uart@5000c000 { /* UART3 */ + uart3: uart@5000c000 { fsl,uart-has-rtscts; status = "okay"; }; ecspi@50010000 { /* ECSPI1 */ fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */ - <&gpio2 19 0>; /* GPIO3_19 */ + cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; status = "okay"; zigbee: mc1323@0 { @@ -91,11 +90,11 @@ reg = <0x53fa8000 0x4000>; }; - uart0: uart@53fbc000 { /* UART1 */ + uart1: uart@53fbc000 { status = "okay"; }; - uart1: uart@53fc0000 { /* UART2 */ + uart2: uart@53fc0000 { status = "okay"; }; }; @@ -145,7 +144,7 @@ fec@63fec000 { phy-mode = "rmii"; - phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */ + phy-reset-gpios = <&gpio7 6 0>; status = "okay"; }; }; @@ -156,13 +155,13 @@ volume-up { label = "Volume Up"; - gpios = <&gpio1 14 0>; /* GPIO2_14 */ + gpios = <&gpio2 14 0>; linux,code = <115>; /* KEY_VOLUMEUP */ }; volume-down { label = "Volume Down"; - gpios = <&gpio1 15 0>; /* GPIO2_15 */ + gpios = <&gpio2 15 0>; linux,code = <114>; /* KEY_VOLUMEDOWN */ }; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 099cd84ee372..5dd91b942c91 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -14,11 +14,11 @@ / { aliases { - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; }; tzic: tz-interrupt-controller@0fffc000 { @@ -88,7 +88,7 @@ status = "disabled"; }; - uart2: uart@5000c000 { /* UART3 */ + uart3: uart@5000c000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x5000c000 0x4000>; interrupts = <33>; @@ -119,7 +119,7 @@ }; }; - gpio0: gpio@53f84000 { /* GPIO1 */ + gpio1: gpio@53f84000 { compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; reg = <0x53f84000 0x4000>; interrupts = <50 51>; @@ -129,7 +129,7 @@ #interrupt-cells = <1>; }; - gpio1: gpio@53f88000 { /* GPIO2 */ + gpio2: gpio@53f88000 { compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; reg = <0x53f88000 0x4000>; interrupts = <52 53>; @@ -139,7 +139,7 @@ #interrupt-cells = <1>; }; - gpio2: gpio@53f8c000 { /* GPIO3 */ + gpio3: gpio@53f8c000 { compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; reg = <0x53f8c000 0x4000>; interrupts = <54 55>; @@ -149,7 +149,7 @@ #interrupt-cells = <1>; }; - gpio3: gpio@53f90000 { /* GPIO4 */ + gpio4: gpio@53f90000 { compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; reg = <0x53f90000 0x4000>; interrupts = <56 57>; @@ -173,21 +173,21 @@ status = "disabled"; }; - uart0: uart@53fbc000 { /* UART1 */ + uart1: uart@53fbc000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53fbc000 0x4000>; interrupts = <31>; status = "disabled"; }; - uart1: uart@53fc0000 { /* UART2 */ + uart2: uart@53fc0000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53fc0000 0x4000>; interrupts = <32>; status = "disabled"; }; - gpio4: gpio@53fdc000 { /* GPIO5 */ + gpio5: gpio@53fdc000 { compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; reg = <0x53fdc000 0x4000>; interrupts = <103 104>; @@ -197,7 +197,7 @@ #interrupt-cells = <1>; }; - gpio5: gpio@53fe0000 { /* GPIO6 */ + gpio6: gpio@53fe0000 { compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; reg = <0x53fe0000 0x4000>; interrupts = <105 106>; @@ -207,7 +207,7 @@ #interrupt-cells = <1>; }; - gpio6: gpio@53fe4000 { /* GPIO7 */ + gpio7: gpio@53fe4000 { compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; reg = <0x53fe4000 0x4000>; interrupts = <107 108>; @@ -226,7 +226,7 @@ status = "disabled"; }; - uart3: uart@53ff0000 { /* UART4 */ + uart4: uart@53ff0000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53ff0000 0x4000>; interrupts = <13>; @@ -241,7 +241,7 @@ reg = <0x60000000 0x10000000>; ranges; - uart4: uart@63f90000 { /* UART5 */ + uart5: uart@63f90000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x63f90000 0x4000>; interrupts = <86>; diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 072974e443f2..c3977e0478b9 100644 --- a/arch/arm/boot/dts/imx6q-sabreauto.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -14,8 +14,8 @@ /include/ "imx6q.dtsi" / { - model = "Freescale i.MX6 Quad SABRE Automotive Board"; - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; + model = "Freescale i.MX6 Quad Armadillo2 Board"; + compatible = "fsl,imx6q-arm2", "fsl,imx6q"; chosen { bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait"; @@ -34,8 +34,8 @@ }; usdhc@02198000 { /* uSDHC3 */ - cd-gpios = <&gpio5 11 0>; /* GPIO6_11 */ - wp-gpios = <&gpio5 14 0>; /* GPIO6_14 */ + cd-gpios = <&gpio6 11 0>; + wp-gpios = <&gpio6 14 0>; status = "okay"; }; @@ -44,7 +44,7 @@ status = "okay"; }; - uart3: uart@021f0000 { /* UART4 */ + uart4: uart@021f0000 { status = "okay"; }; }; @@ -55,7 +55,7 @@ debug-led { label = "Heartbeat"; - gpios = <&gpio2 25 0>; /* GPIO3_25 */ + gpios = <&gpio3 25 0>; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts new file mode 100644 index 000000000000..08d920de7286 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -0,0 +1,49 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx6q.dtsi" + +/ { + model = "Freescale i.MX6 Quad SABRE Lite Board"; + compatible = "fsl,imx6q-sabrelite", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + soc { + aips-bus@02100000 { /* AIPS2 */ + enet@02188000 { + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 0>; + status = "okay"; + }; + + usdhc@02198000 { /* uSDHC3 */ + cd-gpios = <&gpio7 0 0>; + wp-gpios = <&gpio7 1 0>; + status = "okay"; + }; + + usdhc@0219c000 { /* uSDHC4 */ + cd-gpios = <&gpio2 6 0>; + wp-gpios = <&gpio2 7 0>; + status = "okay"; + }; + + uart2: uart@021e8000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 7dda599558cc..263e8f3664b5 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -14,11 +14,11 @@ / { aliases { - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; }; cpus { @@ -165,7 +165,7 @@ status = "disabled"; }; - uart0: uart@02020000 { /* UART1 */ + uart1: uart@02020000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 0x04>; @@ -247,7 +247,7 @@ interrupts = <0 55 0x04>; }; - gpio0: gpio@0209c000 { /* GPIO1 */ + gpio1: gpio@0209c000 { compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; reg = <0x0209c000 0x4000>; interrupts = <0 66 0x04 0 67 0x04>; @@ -257,7 +257,7 @@ #interrupt-cells = <1>; }; - gpio1: gpio@020a0000 { /* GPIO2 */ + gpio2: gpio@020a0000 { compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; reg = <0x020a0000 0x4000>; interrupts = <0 68 0x04 0 69 0x04>; @@ -267,7 +267,7 @@ #interrupt-cells = <1>; }; - gpio2: gpio@020a4000 { /* GPIO3 */ + gpio3: gpio@020a4000 { compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; reg = <0x020a4000 0x4000>; interrupts = <0 70 0x04 0 71 0x04>; @@ -277,7 +277,7 @@ #interrupt-cells = <1>; }; - gpio3: gpio@020a8000 { /* GPIO4 */ + gpio4: gpio@020a8000 { compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; reg = <0x020a8000 0x4000>; interrupts = <0 72 0x04 0 73 0x04>; @@ -287,7 +287,7 @@ #interrupt-cells = <1>; }; - gpio4: gpio@020ac000 { /* GPIO5 */ + gpio5: gpio@020ac000 { compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; reg = <0x020ac000 0x4000>; interrupts = <0 74 0x04 0 75 0x04>; @@ -297,7 +297,7 @@ #interrupt-cells = <1>; }; - gpio5: gpio@020b0000 { /* GPIO6 */ + gpio6: gpio@020b0000 { compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; reg = <0x020b0000 0x4000>; interrupts = <0 76 0x04 0 77 0x04>; @@ -307,7 +307,7 @@ #interrupt-cells = <1>; }; - gpio6: gpio@020b4000 { /* GPIO7 */ + gpio7: gpio@020b4000 { compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; reg = <0x020b4000 0x4000>; interrupts = <0 78 0x04 0 79 0x04>; @@ -543,28 +543,28 @@ interrupts = <0 18 0x04>; }; - uart1: uart@021e8000 { /* UART2 */ + uart2: uart@021e8000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021e8000 0x4000>; interrupts = <0 27 0x04>; status = "disabled"; }; - uart2: uart@021ec000 { /* UART3 */ + uart3: uart@021ec000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021ec000 0x4000>; interrupts = <0 28 0x04>; status = "disabled"; }; - uart3: uart@021f0000 { /* UART4 */ + uart4: uart@021f0000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f0000 0x4000>; interrupts = <0 29 0x04>; status = "disabled"; }; - uart4: uart@021f4000 { /* UART5 */ + uart5: uart@021f4000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f4000 0x4000>; interrupts = <0 30 0x04>; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi new file mode 100644 index 000000000000..f2ab4ea7cc0e --- /dev/null +++ b/arch/arm/boot/dts/omap2.dtsi @@ -0,0 +1,67 @@ +/* + * Device Tree Source for OMAP2 SoC + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "ti,omap2430", "ti,omap2420", "ti,omap2"; + + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + }; + + cpus { + cpu@0 { + compatible = "arm,arm1136jf-s"; + }; + }; + + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap2-mpu"; + ti,hwmods = "mpu"; + }; + }; + + ocp { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main"; + + intc: interrupt-controller@1 { + compatible = "ti,omap2-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart1: serial@4806a000 { + compatible = "ti,omap2-uart"; + ti,hwmods = "uart1"; + clock-frequency = <48000000>; + }; + + uart2: serial@4806c000 { + compatible = "ti,omap2-uart"; + ti,hwmods = "uart2"; + clock-frequency = <48000000>; + }; + + uart3: serial@4806e000 { + compatible = "ti,omap2-uart"; + ti,hwmods = "uart3"; + clock-frequency = <48000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index d202bb5ec7ef..216c3317461d 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -13,6 +13,13 @@ / { compatible = "ti,omap3430", "ti,omap3"; + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + }; + cpus { cpu@0 { compatible = "arm,cortex-a8"; @@ -59,5 +66,29 @@ interrupt-controller; #interrupt-cells = <1>; }; + + uart1: serial@0x4806a000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart1"; + clock-frequency = <48000000>; + }; + + uart2: serial@0x4806c000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart2"; + clock-frequency = <48000000>; + }; + + uart3: serial@0x49020000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart3"; + clock-frequency = <48000000>; + }; + + uart4: serial@0x49042000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; }; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 4c61c829043a..e8fe75fac7c5 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -21,6 +21,10 @@ interrupt-parent = <&gic>; aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; }; cpus { @@ -99,5 +103,29 @@ reg = <0x48241000 0x1000>, <0x48240100 0x0100>; }; + + uart1: serial@0x4806a000 { + compatible = "ti,omap4-uart"; + ti,hwmods = "uart1"; + clock-frequency = <48000000>; + }; + + uart2: serial@0x4806c000 { + compatible = "ti,omap4-uart"; + ti,hwmods = "uart2"; + clock-frequency = <48000000>; + }; + + uart3: serial@0x48020000 { + compatible = "ti,omap4-uart"; + ti,hwmods = "uart3"; + clock-frequency = <48000000>; + }; + + uart4: serial@0x4806e000 { + compatible = "ti,omap4-uart"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; }; }; diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra-cardhu.dts new file mode 100644 index 000000000000..70c41fc897d7 --- /dev/null +++ b/arch/arm/boot/dts/tegra-cardhu.dts @@ -0,0 +1,36 @@ +/dts-v1/; + +/include/ "tegra30.dtsi" + +/ { + model = "NVIDIA Tegra30 Cardhu evaluation board"; + compatible = "nvidia,cardhu", "nvidia,tegra30"; + + memory { + reg = < 0x80000000 0x40000000 >; + }; + + serial@70006000 { + clock-frequency = < 408000000 >; + }; + + i2c@7000c000 { + clock-frequency = <100000>; + }; + + i2c@7000c400 { + clock-frequency = <100000>; + }; + + i2c@7000c500 { + clock-frequency = <100000>; + }; + + i2c@7000c700 { + clock-frequency = <100000>; + }; + + i2c@7000d000 { + clock-frequency = <100000>; + }; +}; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 0e225b86b652..80afa1b70b80 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -1,16 +1,11 @@ /dts-v1/; -/memreserve/ 0x1c000000 0x04000000; /include/ "tegra20.dtsi" / { model = "NVIDIA Tegra2 Harmony evaluation board"; compatible = "nvidia,harmony", "nvidia,tegra20"; - chosen { - bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootwait"; - }; - memory@0 { reg = < 0x00000000 0x40000000 >; }; @@ -52,16 +47,40 @@ ext-mic-en-gpios = <&gpio 185 0>; }; + serial@70006000 { + status = "disable"; + }; + + serial@70006040 { + status = "disable"; + }; + + serial@70006200 { + status = "disable"; + }; + serial@70006300 { clock-frequency = < 216000000 >; }; + serial@70006400 { + status = "disable"; + }; + + sdhci@c8000000 { + status = "disable"; + }; + sdhci@c8000200 { cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 155 0>; /* gpio PT3 */ }; + sdhci@c8000400 { + status = "disable"; + }; + sdhci@c8000600 { cd-gpios = <&gpio 58 0>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts new file mode 100644 index 000000000000..1a1d7023b69b --- /dev/null +++ b/arch/arm/boot/dts/tegra-paz00.dts @@ -0,0 +1,77 @@ +/dts-v1/; + +/include/ "tegra20.dtsi" + +/ { + model = "Toshiba AC100 / Dynabook AZ"; + compatible = "compal,paz00", "nvidia,tegra20"; + + memory@0 { + reg = <0x00000000 0x20000000>; + }; + + i2c@7000c000 { + clock-frequency = <400000>; + }; + + i2c@7000c400 { + clock-frequency = <400000>; + }; + + i2c@7000c500 { + status = "disable"; + }; + + nvec@7000c500 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,nvec"; + reg = <0x7000C500 0x100>; + interrupts = <0 92 0x04>; + clock-frequency = <80000>; + request-gpios = <&gpio 170 0>; + slave-addr = <138>; + }; + + i2c@7000d000 { + clock-frequency = <400000>; + }; + + serial@70006000 { + clock-frequency = <216000000>; + }; + + serial@70006040 { + status = "disable"; + }; + + serial@70006200 { + status = "disable"; + }; + + serial@70006300 { + clock-frequency = <216000000>; + }; + + serial@70006400 { + status = "disable"; + }; + + sdhci@c8000000 { + cd-gpios = <&gpio 173 0>; /* gpio PV5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ + }; + + sdhci@c8000200 { + status = "disable"; + }; + + sdhci@c8000400 { + status = "disable"; + }; + + sdhci@c8000600 { + support-8bit; + }; +}; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index a72299b8e668..b55a02e34ba7 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -1,25 +1,65 @@ /dts-v1/; -/memreserve/ 0x1c000000 0x04000000; /include/ "tegra20.dtsi" / { model = "NVIDIA Seaboard"; compatible = "nvidia,seaboard", "nvidia,tegra20"; - chosen { - bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk1p3 rw rootwait"; - }; - memory { device_type = "memory"; reg = < 0x00000000 0x40000000 >; }; + i2c@7000c000 { + clock-frequency = <400000>; + }; + + i2c@7000c400 { + clock-frequency = <400000>; + }; + + i2c@7000c500 { + clock-frequency = <400000>; + }; + + i2c@7000d000 { + clock-frequency = <400000>; + + adt7461@4c { + compatible = "adt7461"; + reg = <0x4c>; + }; + }; + + serial@70006000 { + status = "disable"; + }; + + serial@70006040 { + status = "disable"; + }; + + serial@70006200 { + status = "disable"; + }; + serial@70006300 { clock-frequency = < 216000000 >; }; + serial@70006400 { + status = "disable"; + }; + + sdhci@c8000000 { + status = "disable"; + }; + + sdhci@c8000200 { + status = "disable"; + }; + sdhci@c8000400 { cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ @@ -29,4 +69,28 @@ sdhci@c8000600 { support-8bit; }; + + usb@c5000000 { + nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */ + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 170 1>; /* gpio PV2, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + + lid { + label = "Lid"; + gpios = <&gpio 23 0>; /* gpio PC7 */ + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra-trimslice.dts new file mode 100644 index 000000000000..3b3ee7db99f3 --- /dev/null +++ b/arch/arm/boot/dts/tegra-trimslice.dts @@ -0,0 +1,65 @@ +/dts-v1/; + +/include/ "tegra20.dtsi" + +/ { + model = "Compulab TrimSlice board"; + compatible = "compulab,trimslice", "nvidia,tegra20"; + + memory@0 { + reg = < 0x00000000 0x40000000 >; + }; + + i2c@7000c000 { + clock-frequency = <400000>; + }; + + i2c@7000c400 { + clock-frequency = <400000>; + }; + + i2c@7000c500 { + clock-frequency = <400000>; + }; + + i2c@7000d000 { + status = "disable"; + }; + + serial@70006000 { + clock-frequency = < 216000000 >; + }; + + serial@70006040 { + status = "disable"; + }; + + serial@70006200 { + status = "disable"; + }; + + serial@70006300 { + status = "disable"; + }; + + serial@70006400 { + status = "disable"; + }; + + sdhci@c8000000 { + status = "disable"; + }; + + sdhci@c8000200 { + status = "disable"; + }; + + sdhci@c8000400 { + status = "disable"; + }; + + sdhci@c8000600 { + cd-gpios = <&gpio 121 0>; + wp-gpios = <&gpio 122 0>; + }; +}; diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts index 3f9abd6b6964..c7d3b87f29df 100644 --- a/arch/arm/boot/dts/tegra-ventana.dts +++ b/arch/arm/boot/dts/tegra-ventana.dts @@ -1,24 +1,59 @@ /dts-v1/; -/memreserve/ 0x1c000000 0x04000000; /include/ "tegra20.dtsi" / { model = "NVIDIA Tegra2 Ventana evaluation board"; compatible = "nvidia,ventana", "nvidia,tegra20"; - chosen { - bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/ram rdinit=/sbin/init"; - }; - memory { reg = < 0x00000000 0x40000000 >; }; + i2c@7000c000 { + clock-frequency = <400000>; + }; + + i2c@7000c400 { + clock-frequency = <400000>; + }; + + i2c@7000c500 { + clock-frequency = <400000>; + }; + + i2c@7000d000 { + clock-frequency = <400000>; + }; + + serial@70006000 { + status = "disable"; + }; + + serial@70006040 { + status = "disable"; + }; + + serial@70006200 { + status = "disable"; + }; + serial@70006300 { clock-frequency = < 216000000 >; }; + serial@70006400 { + status = "disable"; + }; + + sdhci@c8000000 { + status = "disable"; + }; + + sdhci@c8000200 { + status = "disable"; + }; + sdhci@c8000400 { cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 65d7e6a333eb..3da7afd45322 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -5,9 +5,9 @@ interrupt-parent = <&intc>; intc: interrupt-controller@50041000 { - compatible = "nvidia,tegra20-gic"; + compatible = "arm,cortex-a9-gic"; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <3>; reg = < 0x50041000 0x1000 >, < 0x50040100 0x0100 >; }; @@ -17,7 +17,7 @@ #size-cells = <0>; compatible = "nvidia,tegra20-i2c"; reg = <0x7000C000 0x100>; - interrupts = < 70 >; + interrupts = < 0 38 0x04 >; }; i2c@7000c400 { @@ -25,7 +25,7 @@ #size-cells = <0>; compatible = "nvidia,tegra20-i2c"; reg = <0x7000C400 0x100>; - interrupts = < 116 >; + interrupts = < 0 84 0x04 >; }; i2c@7000c500 { @@ -33,38 +33,32 @@ #size-cells = <0>; compatible = "nvidia,tegra20-i2c"; reg = <0x7000C500 0x100>; - interrupts = < 124 >; + interrupts = < 0 92 0x04 >; }; i2c@7000d000 { #address-cells = <1>; #size-cells = <0>; - compatible = "nvidia,tegra20-i2c"; + compatible = "nvidia,tegra20-i2c-dvc"; reg = <0x7000D000 0x200>; - interrupts = < 85 >; + interrupts = < 0 53 0x04 >; }; i2s@70002800 { - #address-cells = <1>; - #size-cells = <0>; compatible = "nvidia,tegra20-i2s"; reg = <0x70002800 0x200>; - interrupts = < 45 >; + interrupts = < 0 13 0x04 >; dma-channel = < 2 >; }; i2s@70002a00 { - #address-cells = <1>; - #size-cells = <0>; compatible = "nvidia,tegra20-i2s"; reg = <0x70002a00 0x200>; - interrupts = < 35 >; + interrupts = < 0 3 0x04 >; dma-channel = < 1 >; }; das@70000c00 { - #address-cells = <1>; - #size-cells = <0>; compatible = "nvidia,tegra20-das"; reg = <0x70000c00 0x80>; }; @@ -72,7 +66,13 @@ gpio: gpio@6000d000 { compatible = "nvidia,tegra20-gpio"; reg = < 0x6000d000 0x1000 >; - interrupts = < 64 65 66 67 87 119 121 >; + interrupts = < 0 32 0x04 + 0 33 0x04 + 0 34 0x04 + 0 35 0x04 + 0 55 0x04 + 0 87 0x04 + 0 89 0x04 >; #gpio-cells = <2>; gpio-controller; }; @@ -89,59 +89,80 @@ compatible = "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; reg-shift = <2>; - interrupts = < 68 >; + interrupts = < 0 36 0x04 >; }; serial@70006040 { compatible = "nvidia,tegra20-uart"; reg = <0x70006040 0x40>; reg-shift = <2>; - interrupts = < 69 >; + interrupts = < 0 37 0x04 >; }; serial@70006200 { compatible = "nvidia,tegra20-uart"; reg = <0x70006200 0x100>; reg-shift = <2>; - interrupts = < 78 >; + interrupts = < 0 46 0x04 >; }; serial@70006300 { compatible = "nvidia,tegra20-uart"; reg = <0x70006300 0x100>; reg-shift = <2>; - interrupts = < 122 >; + interrupts = < 0 90 0x04 >; }; serial@70006400 { compatible = "nvidia,tegra20-uart"; reg = <0x70006400 0x100>; reg-shift = <2>; - interrupts = < 123 >; + interrupts = < 0 91 0x04 >; }; sdhci@c8000000 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000000 0x200>; - interrupts = < 46 >; + interrupts = < 0 14 0x04 >; }; sdhci@c8000200 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000200 0x200>; - interrupts = < 47 >; + interrupts = < 0 15 0x04 >; }; sdhci@c8000400 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000400 0x200>; - interrupts = < 51 >; + interrupts = < 0 19 0x04 >; }; sdhci@c8000600 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000600 0x200>; - interrupts = < 63 >; + interrupts = < 0 31 0x04 >; + }; + + usb@c5000000 { + compatible = "nvidia,tegra20-ehci", "usb-ehci"; + reg = <0xc5000000 0x4000>; + interrupts = < 0 20 0x04 >; + phy_type = "utmi"; + }; + + usb@c5004000 { + compatible = "nvidia,tegra20-ehci", "usb-ehci"; + reg = <0xc5004000 0x4000>; + interrupts = < 0 21 0x04 >; + phy_type = "ulpi"; + }; + + usb@c5008000 { + compatible = "nvidia,tegra20-ehci", "usb-ehci"; + reg = <0xc5008000 0x4000>; + interrupts = < 0 97 0x04 >; + phy_type = "utmi"; }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi new file mode 100644 index 000000000000..ee7db9892e02 --- /dev/null +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -0,0 +1,127 @@ +/include/ "skeleton.dtsi" + +/ { + compatible = "nvidia,tegra30"; + interrupt-parent = <&intc>; + + intc: interrupt-controller@50041000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = < 0x50041000 0x1000 >, + < 0x50040100 0x0100 >; + }; + + i2c@7000c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000C000 0x100>; + interrupts = < 0 38 0x04 >; + }; + + i2c@7000c400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000C400 0x100>; + interrupts = < 0 84 0x04 >; + }; + + i2c@7000c500 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000C500 0x100>; + interrupts = < 0 92 0x04 >; + }; + + i2c@7000c700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c700 0x100>; + interrupts = < 0 120 0x04 >; + }; + + i2c@7000d000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000D000 0x100>; + interrupts = < 0 53 0x04 >; + }; + + gpio: gpio@6000d000 { + compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio"; + reg = < 0x6000d000 0x1000 >; + interrupts = < 0 32 0x04 0 33 0x04 0 34 0x04 0 35 0x04 0 55 0x04 0 87 0x04 0 89 0x04 >; + #gpio-cells = <2>; + gpio-controller; + }; + + serial@70006000 { + compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; + reg = <0x70006000 0x40>; + reg-shift = <2>; + interrupts = < 0 36 0x04 >; + }; + + serial@70006040 { + compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; + reg = <0x70006040 0x40>; + reg-shift = <2>; + interrupts = < 0 37 0x04 >; + }; + + serial@70006200 { + compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; + reg = <0x70006200 0x100>; + reg-shift = <2>; + interrupts = < 0 46 0x04 >; + }; + + serial@70006300 { + compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; + reg = <0x70006300 0x100>; + reg-shift = <2>; + interrupts = < 0 90 0x04 >; + }; + + serial@70006400 { + compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; + reg = <0x70006400 0x100>; + reg-shift = <2>; + interrupts = < 0 91 0x04 >; + }; + + sdhci@78000000 { + compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; + reg = <0x78000000 0x200>; + interrupts = < 0 14 0x04 >; + }; + + sdhci@78000200 { + compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; + reg = <0x78000200 0x200>; + interrupts = < 0 15 0x04 >; + }; + + sdhci@78000400 { + compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; + reg = <0x78000400 0x200>; + interrupts = < 0 19 0x04 >; + }; + + sdhci@78000600 { + compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; + reg = <0x78000600 0x200>; + interrupts = < 0 31 0x04 >; + }; + + pinmux: pinmux@70000000 { + compatible = "nvidia,tegra30-pinmux"; + reg = < 0x70000868 0xd0 /* Pad control registers */ + 0x70003000 0x3e0 >; /* Mux registers */ + }; +}; diff --git a/arch/arm/boot/dts/testcases/tests-phandle.dtsi b/arch/arm/boot/dts/testcases/tests-phandle.dtsi new file mode 100644 index 000000000000..ec0c4e6212c9 --- /dev/null +++ b/arch/arm/boot/dts/testcases/tests-phandle.dtsi @@ -0,0 +1,37 @@ + +/ { + testcase-data { + phandle-tests { + provider0: provider0 { + #phandle-cells = <0>; + }; + + provider1: provider1 { + #phandle-cells = <1>; + }; + + provider2: provider2 { + #phandle-cells = <2>; + }; + + provider3: provider3 { + #phandle-cells = <3>; + }; + + consumer-a { + phandle-list = <&provider1 1>, + <&provider2 2 0>, + <0>, + <&provider3 4 4 3>, + <&provider2 5 100>, + <&provider0>, + <&provider1 7>; + phandle-list-names = "first", "second", "third"; + + phandle-list-bad-phandle = <12345678 0 0>; + phandle-list-bad-args = <&provider2 1 0>, + <&provider3 0>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/testcases/tests.dtsi b/arch/arm/boot/dts/testcases/tests.dtsi new file mode 100644 index 000000000000..a7c5067622e8 --- /dev/null +++ b/arch/arm/boot/dts/testcases/tests.dtsi @@ -0,0 +1 @@ +/include/ "tests-phandle.dtsi" diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts index d66e2c00ac35..f04b535477f5 100644 --- a/arch/arm/boot/dts/usb_a9g20.dts +++ b/arch/arm/boot/dts/usb_a9g20.dts @@ -25,6 +25,11 @@ dbgu: serial@fffff200 { status = "okay"; }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index 8a614e398004..166461073b78 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -46,3 +46,5 @@ }; }; }; + +/include/ "testcases/tests.dtsi" diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 74df9ca2be31..81a933eb0903 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -1,8 +1,14 @@ config ARM_GIC select IRQ_DOMAIN + select MULTI_IRQ_HANDLER + bool + +config GIC_NON_BANKED bool config ARM_VIC + select IRQ_DOMAIN + select MULTI_IRQ_HANDLER bool config ARM_VIC_NR diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 410a546060a2..b2dc2dd7f1df 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -40,13 +40,36 @@ #include <linux/slab.h> #include <asm/irq.h> +#include <asm/exception.h> #include <asm/mach/irq.h> #include <asm/hardware/gic.h> -static DEFINE_RAW_SPINLOCK(irq_controller_lock); +union gic_base { + void __iomem *common_base; + void __percpu __iomem **percpu_base; +}; -/* Address of GIC 0 CPU interface */ -void __iomem *gic_cpu_base_addr __read_mostly; +struct gic_chip_data { + unsigned int irq_offset; + union gic_base dist_base; + union gic_base cpu_base; +#ifdef CONFIG_CPU_PM + u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)]; + u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)]; + u32 saved_spi_target[DIV_ROUND_UP(1020, 4)]; + u32 __percpu *saved_ppi_enable; + u32 __percpu *saved_ppi_conf; +#endif +#ifdef CONFIG_IRQ_DOMAIN + struct irq_domain domain; +#endif + unsigned int gic_irqs; +#ifdef CONFIG_GIC_NON_BANKED + void __iomem *(*get_base)(union gic_base *); +#endif +}; + +static DEFINE_RAW_SPINLOCK(irq_controller_lock); /* * Supported arch specific GIC irq extension. @@ -67,16 +90,48 @@ struct irq_chip gic_arch_extn = { static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly; +#ifdef CONFIG_GIC_NON_BANKED +static void __iomem *gic_get_percpu_base(union gic_base *base) +{ + return *__this_cpu_ptr(base->percpu_base); +} + +static void __iomem *gic_get_common_base(union gic_base *base) +{ + return base->common_base; +} + +static inline void __iomem *gic_data_dist_base(struct gic_chip_data *data) +{ + return data->get_base(&data->dist_base); +} + +static inline void __iomem *gic_data_cpu_base(struct gic_chip_data *data) +{ + return data->get_base(&data->cpu_base); +} + +static inline void gic_set_base_accessor(struct gic_chip_data *data, + void __iomem *(*f)(union gic_base *)) +{ + data->get_base = f; +} +#else +#define gic_data_dist_base(d) ((d)->dist_base.common_base) +#define gic_data_cpu_base(d) ((d)->cpu_base.common_base) +#define gic_set_base_accessor(d,f) +#endif + static inline void __iomem *gic_dist_base(struct irq_data *d) { struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); - return gic_data->dist_base; + return gic_data_dist_base(gic_data); } static inline void __iomem *gic_cpu_base(struct irq_data *d) { struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); - return gic_data->cpu_base; + return gic_data_cpu_base(gic_data); } static inline unsigned int gic_irq(struct irq_data *d) @@ -215,6 +270,32 @@ static int gic_set_wake(struct irq_data *d, unsigned int on) #define gic_set_wake NULL #endif +asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs) +{ + u32 irqstat, irqnr; + struct gic_chip_data *gic = &gic_data[0]; + void __iomem *cpu_base = gic_data_cpu_base(gic); + + do { + irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK); + irqnr = irqstat & ~0x1c00; + + if (likely(irqnr > 15 && irqnr < 1021)) { + irqnr = irq_domain_to_irq(&gic->domain, irqnr); + handle_IRQ(irqnr, regs); + continue; + } + if (irqnr < 16) { + writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI); +#ifdef CONFIG_SMP + handle_IPI(irqnr, regs); +#endif + continue; + } + break; + } while (1); +} + static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) { struct gic_chip_data *chip_data = irq_get_handler_data(irq); @@ -225,7 +306,7 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) chained_irq_enter(chip, desc); raw_spin_lock(&irq_controller_lock); - status = readl_relaxed(chip_data->cpu_base + GIC_CPU_INTACK); + status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK); raw_spin_unlock(&irq_controller_lock); gic_irq = (status & 0x3ff); @@ -270,7 +351,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic) u32 cpumask; unsigned int gic_irqs = gic->gic_irqs; struct irq_domain *domain = &gic->domain; - void __iomem *base = gic->dist_base; + void __iomem *base = gic_data_dist_base(gic); u32 cpu = 0; #ifdef CONFIG_SMP @@ -330,8 +411,8 @@ static void __init gic_dist_init(struct gic_chip_data *gic) static void __cpuinit gic_cpu_init(struct gic_chip_data *gic) { - void __iomem *dist_base = gic->dist_base; - void __iomem *base = gic->cpu_base; + void __iomem *dist_base = gic_data_dist_base(gic); + void __iomem *base = gic_data_cpu_base(gic); int i; /* @@ -368,7 +449,7 @@ static void gic_dist_save(unsigned int gic_nr) BUG(); gic_irqs = gic_data[gic_nr].gic_irqs; - dist_base = gic_data[gic_nr].dist_base; + dist_base = gic_data_dist_base(&gic_data[gic_nr]); if (!dist_base) return; @@ -403,7 +484,7 @@ static void gic_dist_restore(unsigned int gic_nr) BUG(); gic_irqs = gic_data[gic_nr].gic_irqs; - dist_base = gic_data[gic_nr].dist_base; + dist_base = gic_data_dist_base(&gic_data[gic_nr]); if (!dist_base) return; @@ -439,8 +520,8 @@ static void gic_cpu_save(unsigned int gic_nr) if (gic_nr >= MAX_GIC_NR) BUG(); - dist_base = gic_data[gic_nr].dist_base; - cpu_base = gic_data[gic_nr].cpu_base; + dist_base = gic_data_dist_base(&gic_data[gic_nr]); + cpu_base = gic_data_cpu_base(&gic_data[gic_nr]); if (!dist_base || !cpu_base) return; @@ -465,8 +546,8 @@ static void gic_cpu_restore(unsigned int gic_nr) if (gic_nr >= MAX_GIC_NR) BUG(); - dist_base = gic_data[gic_nr].dist_base; - cpu_base = gic_data[gic_nr].cpu_base; + dist_base = gic_data_dist_base(&gic_data[gic_nr]); + cpu_base = gic_data_cpu_base(&gic_data[gic_nr]); if (!dist_base || !cpu_base) return; @@ -491,6 +572,11 @@ static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v) int i; for (i = 0; i < MAX_GIC_NR; i++) { +#ifdef CONFIG_GIC_NON_BANKED + /* Skip over unused GICs */ + if (!gic_data[i].get_base) + continue; +#endif switch (cmd) { case CPU_PM_ENTER: gic_cpu_save(i); @@ -564,8 +650,9 @@ const struct irq_domain_ops gic_irq_domain_ops = { #endif }; -void __init gic_init(unsigned int gic_nr, int irq_start, - void __iomem *dist_base, void __iomem *cpu_base) +void __init gic_init_bases(unsigned int gic_nr, int irq_start, + void __iomem *dist_base, void __iomem *cpu_base, + u32 percpu_offset) { struct gic_chip_data *gic; struct irq_domain *domain; @@ -575,8 +662,36 @@ void __init gic_init(unsigned int gic_nr, int irq_start, gic = &gic_data[gic_nr]; domain = &gic->domain; - gic->dist_base = dist_base; - gic->cpu_base = cpu_base; +#ifdef CONFIG_GIC_NON_BANKED + if (percpu_offset) { /* Frankein-GIC without banked registers... */ + unsigned int cpu; + + gic->dist_base.percpu_base = alloc_percpu(void __iomem *); + gic->cpu_base.percpu_base = alloc_percpu(void __iomem *); + if (WARN_ON(!gic->dist_base.percpu_base || + !gic->cpu_base.percpu_base)) { + free_percpu(gic->dist_base.percpu_base); + free_percpu(gic->cpu_base.percpu_base); + return; + } + + for_each_possible_cpu(cpu) { + unsigned long offset = percpu_offset * cpu_logical_map(cpu); + *per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset; + *per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset; + } + + gic_set_base_accessor(gic, gic_get_percpu_base); + } else +#endif + { /* Normal, sane GIC... */ + WARN(percpu_offset, + "GIC_NON_BANKED not enabled, ignoring %08x offset!", + percpu_offset); + gic->dist_base.common_base = dist_base; + gic->cpu_base.common_base = cpu_base; + gic_set_base_accessor(gic, gic_get_common_base); + } /* * For primary GICs, skip over SGIs. @@ -584,8 +699,6 @@ void __init gic_init(unsigned int gic_nr, int irq_start, */ domain->hwirq_base = 32; if (gic_nr == 0) { - gic_cpu_base_addr = cpu_base; - if ((irq_start & 31) > 0) { domain->hwirq_base = 16; if (irq_start != -1) @@ -597,7 +710,7 @@ void __init gic_init(unsigned int gic_nr, int irq_start, * Find out how many interrupts are supported. * The GIC only supports up to 1020 interrupt sources. */ - gic_irqs = readl_relaxed(dist_base + GIC_DIST_CTR) & 0x1f; + gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f; gic_irqs = (gic_irqs + 1) * 32; if (gic_irqs > 1020) gic_irqs = 1020; @@ -645,7 +758,7 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) dsb(); /* this always happens on GIC0 */ - writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT); + writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT); } #endif @@ -656,6 +769,7 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent) { void __iomem *cpu_base; void __iomem *dist_base; + u32 percpu_offset; int irq; struct irq_domain *domain = &gic_data[gic_cnt].domain; @@ -668,9 +782,12 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent) cpu_base = of_iomap(node, 1); WARN(!cpu_base, "unable to map gic cpu registers\n"); + if (of_property_read_u32(node, "cpu-offset", &percpu_offset)) + percpu_offset = 0; + domain->of_node = of_node_get(node); - gic_init(gic_cnt, -1, dist_base, cpu_base); + gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset); if (parent) { irq = irq_of_parse_and_map(node, 0); diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index b539ec855e1a..d1bcd7b13ebc 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -299,8 +299,8 @@ int __init it8152_pci_setup(int nr, struct pci_sys_data *sys) goto err1; } - sys->resource[0] = &it8152_io; - sys->resource[1] = &it8152_mem; + pci_add_resource(&sys->resources, &it8152_io); + pci_add_resource(&sys->resources, &it8152_mem); if (platform_notify || platform_notify_remove) { printk(KERN_ERR "PCI: Can't use platform_notify\n"); @@ -327,6 +327,9 @@ err0: */ unsigned int pcibios_max_latency = 255; +/* ITE bridge requires setting latency timer to avoid early bus access + termination by PCI bus master devices +*/ void pcibios_set_master(struct pci_dev *dev) { u8 lat; @@ -352,7 +355,7 @@ void pcibios_set_master(struct pci_dev *dev) struct pci_bus * __init it8152_pci_scan_bus(int nr, struct pci_sys_data *sys) { - return pci_scan_bus(nr, &it8152_ops, sys); + return pci_scan_root_bus(NULL, nr, &it8152_ops, sys, &sys->resources); } EXPORT_SYMBOL(dma_set_coherent_mask); diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index f407a6b35d3d..d8e44a43047c 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -221,17 +221,6 @@ */ #define MCODE_BUFF_PER_REQ 256 -/* - * Mark a _pl330_req as free. - * We do it by writing DMAEND as the first instruction - * because no valid request is going to have DMAEND as - * its first instruction to execute. - */ -#define MARK_FREE(req) do { \ - _emit_END(0, (req)->mc_cpu); \ - (req)->mc_len = 0; \ - } while (0) - /* If the _pl330_req is available to the client */ #define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND) @@ -301,8 +290,10 @@ struct pl330_thread { struct pl330_dmac *dmac; /* Only two at a time */ struct _pl330_req req[2]; - /* Index of the last submitted request */ + /* Index of the last enqueued request */ unsigned lstenq; + /* Index of the last submitted request or -1 if the DMA is stopped */ + int req_running; }; enum pl330_dmac_state { @@ -778,6 +769,22 @@ static inline void _execute_DBGINSN(struct pl330_thread *thrd, writel(0, regs + DBGCMD); } +/* + * Mark a _pl330_req as free. + * We do it by writing DMAEND as the first instruction + * because no valid request is going to have DMAEND as + * its first instruction to execute. + */ +static void mark_free(struct pl330_thread *thrd, int idx) +{ + struct _pl330_req *req = &thrd->req[idx]; + + _emit_END(0, req->mc_cpu); + req->mc_len = 0; + + thrd->req_running = -1; +} + static inline u32 _state(struct pl330_thread *thrd) { void __iomem *regs = thrd->dmac->pinfo->base; @@ -836,31 +843,6 @@ static inline u32 _state(struct pl330_thread *thrd) } } -/* If the request 'req' of thread 'thrd' is currently active */ -static inline bool _req_active(struct pl330_thread *thrd, - struct _pl330_req *req) -{ - void __iomem *regs = thrd->dmac->pinfo->base; - u32 buf = req->mc_bus, pc = readl(regs + CPC(thrd->id)); - - if (IS_FREE(req)) - return false; - - return (pc >= buf && pc <= buf + req->mc_len) ? true : false; -} - -/* Returns 0 if the thread is inactive, ID of active req + 1 otherwise */ -static inline unsigned _thrd_active(struct pl330_thread *thrd) -{ - if (_req_active(thrd, &thrd->req[0])) - return 1; /* First req active */ - - if (_req_active(thrd, &thrd->req[1])) - return 2; /* Second req active */ - - return 0; -} - static void _stop(struct pl330_thread *thrd) { void __iomem *regs = thrd->dmac->pinfo->base; @@ -892,17 +874,22 @@ static bool _trigger(struct pl330_thread *thrd) struct _arg_GO go; unsigned ns; u8 insn[6] = {0, 0, 0, 0, 0, 0}; + int idx; /* Return if already ACTIVE */ if (_state(thrd) != PL330_STATE_STOPPED) return true; - if (!IS_FREE(&thrd->req[1 - thrd->lstenq])) - req = &thrd->req[1 - thrd->lstenq]; - else if (!IS_FREE(&thrd->req[thrd->lstenq])) - req = &thrd->req[thrd->lstenq]; - else - req = NULL; + idx = 1 - thrd->lstenq; + if (!IS_FREE(&thrd->req[idx])) + req = &thrd->req[idx]; + else { + idx = thrd->lstenq; + if (!IS_FREE(&thrd->req[idx])) + req = &thrd->req[idx]; + else + req = NULL; + } /* Return if no request */ if (!req || !req->r) @@ -933,6 +920,8 @@ static bool _trigger(struct pl330_thread *thrd) /* Only manager can execute GO */ _execute_DBGINSN(thrd, insn, true); + thrd->req_running = idx; + return true; } @@ -1382,8 +1371,8 @@ static void pl330_dotask(unsigned long data) thrd->req[0].r = NULL; thrd->req[1].r = NULL; - MARK_FREE(&thrd->req[0]); - MARK_FREE(&thrd->req[1]); + mark_free(thrd, 0); + mark_free(thrd, 1); /* Clear the reset flag */ pl330->dmac_tbd.reset_chan &= ~(1 << i); @@ -1461,14 +1450,12 @@ int pl330_update(const struct pl330_info *pi) thrd = &pl330->channels[id]; - active = _thrd_active(thrd); - if (!active) /* Aborted */ + active = thrd->req_running; + if (active == -1) /* Aborted */ continue; - active -= 1; - rqdone = &thrd->req[active]; - MARK_FREE(rqdone); + mark_free(thrd, active); /* Get going again ASAP */ _start(thrd); @@ -1480,13 +1467,19 @@ int pl330_update(const struct pl330_info *pi) /* Now that we are in no hurry, do the callbacks */ while (!list_empty(&pl330->req_done)) { + struct pl330_req *r; + rqdone = container_of(pl330->req_done.next, struct _pl330_req, rqd); list_del_init(&rqdone->rqd); + /* Detach the req */ + r = rqdone->r; + rqdone->r = NULL; + spin_unlock_irqrestore(&pl330->lock, flags); - _callback(rqdone->r, PL330_ERR_NONE); + _callback(r, PL330_ERR_NONE); spin_lock_irqsave(&pl330->lock, flags); } @@ -1509,7 +1502,7 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) struct pl330_thread *thrd = ch_id; struct pl330_dmac *pl330; unsigned long flags; - int ret = 0, active; + int ret = 0, active = thrd->req_running; if (!thrd || thrd->free || thrd->dmac->state == DYING) return -EINVAL; @@ -1525,28 +1518,24 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) thrd->req[0].r = NULL; thrd->req[1].r = NULL; - MARK_FREE(&thrd->req[0]); - MARK_FREE(&thrd->req[1]); + mark_free(thrd, 0); + mark_free(thrd, 1); break; case PL330_OP_ABORT: - active = _thrd_active(thrd); - /* Make sure the channel is stopped */ _stop(thrd); /* ABORT is only for the active req */ - if (!active) + if (active == -1) break; - active--; - thrd->req[active].r = NULL; - MARK_FREE(&thrd->req[active]); + mark_free(thrd, active); /* Start the next */ case PL330_OP_START: - if (!_thrd_active(thrd) && !_start(thrd)) + if ((active == -1) && !_start(thrd)) ret = -EIO; break; @@ -1587,14 +1576,13 @@ int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus) else pstatus->faulting = false; - active = _thrd_active(thrd); + active = thrd->req_running; - if (!active) { + if (active == -1) { /* Indicate that the thread is not running */ pstatus->top_req = NULL; pstatus->wait_req = NULL; } else { - active--; pstatus->top_req = thrd->req[active].r; pstatus->wait_req = !IS_FREE(&thrd->req[1 - active]) ? thrd->req[1 - active].r : NULL; @@ -1659,9 +1647,9 @@ void *pl330_request_channel(const struct pl330_info *pi) thrd->free = false; thrd->lstenq = 1; thrd->req[0].r = NULL; - MARK_FREE(&thrd->req[0]); + mark_free(thrd, 0); thrd->req[1].r = NULL; - MARK_FREE(&thrd->req[1]); + mark_free(thrd, 1); break; } } @@ -1767,14 +1755,14 @@ static inline void _reset_thread(struct pl330_thread *thrd) thrd->req[0].mc_bus = pl330->mcode_bus + (thrd->id * pi->mcbufsz); thrd->req[0].r = NULL; - MARK_FREE(&thrd->req[0]); + mark_free(thrd, 0); thrd->req[1].mc_cpu = thrd->req[0].mc_cpu + pi->mcbufsz / 2; thrd->req[1].mc_bus = thrd->req[0].mc_bus + pi->mcbufsz / 2; thrd->req[1].r = NULL; - MARK_FREE(&thrd->req[1]); + mark_free(thrd, 1); } static int dmac_alloc_threads(struct pl330_dmac *pl330) diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index 2393b5bc96fa..8794a34eae61 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -143,7 +143,6 @@ static int sp804_set_next_event(unsigned long next, } static struct clock_event_device sp804_clockevent = { - .shift = 32, .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = sp804_set_mode, .set_next_event = sp804_set_next_event, @@ -169,13 +168,9 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq, clkevt_base = base; clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ); - evt->name = name; evt->irq = irq; - evt->mult = div_sc(rate, NSEC_PER_SEC, evt->shift); - evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt); - evt->min_delta_ns = clockevent_delta2ns(0xf, evt); setup_irq(irq, &sp804_timer_irq); - clockevents_register_device(evt); + clockevents_config_and_register(evt, rate, 0xf, 0xffffffff); } diff --git a/arch/arm/common/via82c505.c b/arch/arm/common/via82c505.c index 8421d39109b3..67dd2affc57a 100644 --- a/arch/arm/common/via82c505.c +++ b/arch/arm/common/via82c505.c @@ -86,7 +86,8 @@ int __init via82c505_setup(int nr, struct pci_sys_data *sys) struct pci_bus * __init via82c505_scan_bus(int nr, struct pci_sys_data *sysdata) { if (nr == 0) - return pci_scan_bus(0, &via82c505_ops, sysdata); + return pci_scan_root_bus(NULL, 0, &via82c505_ops, sysdata, + &sysdata->resources); return NULL; } diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 01f18a421b17..dcb004a804c7 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -19,17 +19,22 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/export.h> #include <linux/init.h> #include <linux/list.h> #include <linux/io.h> +#include <linux/irqdomain.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/syscore_ops.h> #include <linux/device.h> #include <linux/amba/bus.h> +#include <asm/exception.h> #include <asm/mach/irq.h> #include <asm/hardware/vic.h> -#ifdef CONFIG_PM /** * struct vic_device - VIC PM device * @irq: The IRQ number for the base of the VIC. @@ -40,6 +45,7 @@ * @int_enable: Save for VIC_INT_ENABLE. * @soft_int: Save for VIC_INT_SOFT. * @protect: Save for VIC_PROTECT. + * @domain: The IRQ domain for the VIC. */ struct vic_device { void __iomem *base; @@ -50,13 +56,13 @@ struct vic_device { u32 int_enable; u32 soft_int; u32 protect; + struct irq_domain domain; }; /* we cannot allocate memory when VICs are initially registered */ static struct vic_device vic_devices[CONFIG_ARM_VIC_NR]; static int vic_id; -#endif /* CONFIG_PM */ /** * vic_init2 - common initialisation code @@ -156,39 +162,50 @@ static int __init vic_pm_init(void) return 0; } late_initcall(vic_pm_init); +#endif /* CONFIG_PM */ /** - * vic_pm_register - Register a VIC for later power management control + * vic_register() - Register a VIC. * @base: The base address of the VIC. * @irq: The base IRQ for the VIC. * @resume_sources: bitmask of interrupts allowed for resume sources. + * @node: The device tree node associated with the VIC. * * Register the VIC with the system device tree so that it can be notified * of suspend and resume requests and ensure that the correct actions are * taken to re-instate the settings on resume. + * + * This also configures the IRQ domain for the VIC. */ -static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources) +static void __init vic_register(void __iomem *base, unsigned int irq, + u32 resume_sources, struct device_node *node) { struct vic_device *v; - if (vic_id >= ARRAY_SIZE(vic_devices)) + if (vic_id >= ARRAY_SIZE(vic_devices)) { printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__); - else { - v = &vic_devices[vic_id]; - v->base = base; - v->resume_sources = resume_sources; - v->irq = irq; - vic_id++; + return; } + + v = &vic_devices[vic_id]; + v->base = base; + v->resume_sources = resume_sources; + v->irq = irq; + vic_id++; + + v->domain.irq_base = irq; + v->domain.nr_irq = 32; +#ifdef CONFIG_OF_IRQ + v->domain.of_node = of_node_get(node); +#endif /* CONFIG_OF */ + v->domain.ops = &irq_domain_simple_ops; + irq_domain_add(&v->domain); } -#else -static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { } -#endif /* CONFIG_PM */ static void vic_ack_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); - unsigned int irq = d->irq & 31; + unsigned int irq = d->hwirq; writel(1 << irq, base + VIC_INT_ENABLE_CLEAR); /* moreover, clear the soft-triggered, in case it was the reason */ writel(1 << irq, base + VIC_INT_SOFT_CLEAR); @@ -197,14 +214,14 @@ static void vic_ack_irq(struct irq_data *d) static void vic_mask_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); - unsigned int irq = d->irq & 31; + unsigned int irq = d->hwirq; writel(1 << irq, base + VIC_INT_ENABLE_CLEAR); } static void vic_unmask_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); - unsigned int irq = d->irq & 31; + unsigned int irq = d->hwirq; writel(1 << irq, base + VIC_INT_ENABLE); } @@ -226,7 +243,7 @@ static struct vic_device *vic_from_irq(unsigned int irq) static int vic_set_wake(struct irq_data *d, unsigned int on) { struct vic_device *v = vic_from_irq(d->irq); - unsigned int off = d->irq & 31; + unsigned int off = d->hwirq; u32 bit = 1 << off; if (!v) @@ -301,7 +318,7 @@ static void __init vic_set_irq_sources(void __iomem *base, * and 020 within the page. We call this "second block". */ static void __init vic_init_st(void __iomem *base, unsigned int irq_start, - u32 vic_sources) + u32 vic_sources, struct device_node *node) { unsigned int i; int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0; @@ -328,17 +345,12 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start, } vic_set_irq_sources(base, irq_start, vic_sources); + vic_register(base, irq_start, 0, node); } -/** - * vic_init - initialise a vectored interrupt controller - * @base: iomem base address - * @irq_start: starting interrupt number, must be muliple of 32 - * @vic_sources: bitmask of interrupt sources to allow - * @resume_sources: bitmask of interrupt sources to allow for resume - */ -void __init vic_init(void __iomem *base, unsigned int irq_start, - u32 vic_sources, u32 resume_sources) +static void __init __vic_init(void __iomem *base, unsigned int irq_start, + u32 vic_sources, u32 resume_sources, + struct device_node *node) { unsigned int i; u32 cellid = 0; @@ -356,7 +368,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, switch(vendor) { case AMBA_VENDOR_ST: - vic_init_st(base, irq_start, vic_sources); + vic_init_st(base, irq_start, vic_sources, node); return; default: printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n"); @@ -375,5 +387,81 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, vic_set_irq_sources(base, irq_start, vic_sources); - vic_pm_register(base, irq_start, resume_sources); + vic_register(base, irq_start, resume_sources, node); +} + +/** + * vic_init() - initialise a vectored interrupt controller + * @base: iomem base address + * @irq_start: starting interrupt number, must be muliple of 32 + * @vic_sources: bitmask of interrupt sources to allow + * @resume_sources: bitmask of interrupt sources to allow for resume + */ +void __init vic_init(void __iomem *base, unsigned int irq_start, + u32 vic_sources, u32 resume_sources) +{ + __vic_init(base, irq_start, vic_sources, resume_sources, NULL); +} + +#ifdef CONFIG_OF +int __init vic_of_init(struct device_node *node, struct device_node *parent) +{ + void __iomem *regs; + int irq_base; + + if (WARN(parent, "non-root VICs are not supported")) + return -EINVAL; + + regs = of_iomap(node, 0); + if (WARN_ON(!regs)) + return -EIO; + + irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id()); + if (WARN_ON(irq_base < 0)) + goto out_unmap; + + __vic_init(regs, irq_base, ~0, ~0, node); + + return 0; + + out_unmap: + iounmap(regs); + + return -EIO; +} +#endif /* CONFIG OF */ + +/* + * Handle each interrupt in a single VIC. Returns non-zero if we've + * handled at least one interrupt. This does a single read of the + * status register and handles all interrupts in order from LSB first. + */ +static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs) +{ + u32 stat, irq; + int handled = 0; + + stat = readl_relaxed(vic->base + VIC_IRQ_STATUS); + while (stat) { + irq = ffs(stat) - 1; + handle_IRQ(irq_domain_to_irq(&vic->domain, irq), regs); + stat &= ~(1 << irq); + handled = 1; + } + + return handled; +} + +/* + * Keep iterating over all registered VIC's until there are no pending + * interrupts. + */ +asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs) +{ + int i, handled; + + do { + for (i = 0, handled = 0; i < vic_id; ++i) + handled |= handle_one_vic(&vic_devices[i], regs); + } while (handled); } diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 11a4192197c8..a22e93079063 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -18,9 +18,10 @@ CONFIG_ARCH_MXC=y CONFIG_ARCH_IMX_V4_V5=y CONFIG_ARCH_MX1ADS=y CONFIG_MACH_SCB9328=y +CONFIG_MACH_APF9328=y CONFIG_MACH_MX21ADS=y CONFIG_MACH_MX25_3DS=y -CONFIG_MACH_EUKREA_CPUIMX25=y +CONFIG_MACH_EUKREA_CPUIMX25SD=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_PCM038=y CONFIG_MACH_CPUIMX27=y @@ -67,22 +68,20 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_CFI_GEOMETRY=y # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set # CONFIG_MTD_CFI_I2 is not set CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_MXC=y CONFIG_MTD_UBI=y CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y CONFIG_DM9000=y +CONFIG_SMC91X=y CONFIG_SMC911X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_SMSC_PHY=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set @@ -100,6 +99,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_IMX=y CONFIG_SPI=y CONFIG_SPI_IMX=y +CONFIG_SPI_SPIDEV=y CONFIG_W1=y CONFIG_W1_MASTER_MXC=y CONFIG_W1_SLAVE_THERM=y @@ -139,6 +139,7 @@ CONFIG_MMC=y CONFIG_MMC_MXC=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y CONFIG_LEDS_MC13783=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index a7e777581378..dde2a1af7b39 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -48,12 +48,6 @@ CONFIG_MACH_SX1=y CONFIG_MACH_NOKIA770=y CONFIG_MACH_AMS_DELTA=y CONFIG_MACH_OMAP_GENERIC=y -CONFIG_OMAP_ARM_216MHZ=y -CONFIG_OMAP_ARM_195MHZ=y -CONFIG_OMAP_ARM_192MHZ=y -CONFIG_OMAP_ARM_182MHZ=y -CONFIG_OMAP_ARM_168MHZ=y -# CONFIG_OMAP_ARM_60MHZ is not set # CONFIG_ARM_THUMB is not set CONFIG_PCCARD=y CONFIG_OMAP_CF=y diff --git a/arch/arm/configs/pcontrol_g20_defconfig b/arch/arm/configs/pcontrol_g20_defconfig deleted file mode 100644 index c75c9fcede58..000000000000 --- a/arch/arm/configs/pcontrol_g20_defconfig +++ /dev/null @@ -1,175 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_CROSS_COMPILE="/opt/arm-2010q1/bin/arm-none-linux-gnueabi-" -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_TREE_PREEMPT_RCU=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_NAMESPACES=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -CONFIG_DEFAULT_DEADLINE=y -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9G20=y -CONFIG_MACH_PCONTROL_G20=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 mem=128M mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) root=/dev/mmcblk0p1 rootwait rw" -CONFIG_VFP=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_VLAN_8021Q=y -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHRAM=m -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_TCLIB=y -CONFIG_EEPROM_AT24=m -CONFIG_SCSI=m -# CONFIG_SCSI_PROC_FS is not set -CONFIG_BLK_DEV_SD=m -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_MACVLAN=m -CONFIG_TUN=m -CONFIG_SMSC_PHY=m -CONFIG_BROADCOM_PHY=m -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -CONFIG_SMSC911X=m -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_MPPE=m -CONFIG_INPUT_POLLDEV=y -CONFIG_INPUT_SPARSEKMAP=y -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=m -CONFIG_INPUT_EVBUG=m -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=m -CONFIG_KEYBOARD_MATRIX=m -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=m -CONFIG_INPUT_GPIO_ROTARY_ENCODER=m -# CONFIG_SERIO is not set -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_SERIAL_MAX3100=m -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_R3964=m -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -# CONFIG_I2C_HELPER_AUTO is not set -CONFIG_I2C_GPIO=m -CONFIG_SPI=y -CONFIG_SPI_ATMEL=m -CONFIG_SPI_SPIDEV=m -CONFIG_GPIO_SYSFS=y -CONFIG_W1=m -CONFIG_W1_MASTER_GPIO=m -CONFIG_W1_SLAVE_DS2431=m -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_MFD_SUPPORT is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=m -CONFIG_USB_LIBUSUAL=y -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_G_HID=m -CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y -CONFIG_MMC_ATMELMCI=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_AUXDISPLAY=y -CONFIG_UIO=y -CONFIG_UIO_PDRV=y -CONFIG_STAGING=y -# CONFIG_STAGING_EXCLUDE_BUILD is not set -CONFIG_IIO=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_UTF8=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ANSI_CPRNG=y -# CONFIG_CRYPTO_HW is not set -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 195729760aeb..fd5d3041d717 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -9,9 +9,8 @@ CONFIG_RESOURCE_COUNTERS=y CONFIG_CGROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set # CONFIG_ELF_CORE is not set +CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -20,6 +19,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_TEGRA=y +CONFIG_ARCH_TEGRA_2x_SOC=y +CONFIG_ARCH_TEGRA_3x_SOC=y CONFIG_MACH_HARMONY=y CONFIG_MACH_KAEN=y CONFIG_MACH_PAZ00=y @@ -78,14 +79,12 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y -CONFIG_NET_ETHERNET=y CONFIG_R8169=y -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set CONFIG_USB_PEGASUS=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y +# CONFIG_WLAN is not set # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 29035e86a59d..b6e65dedfd71 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -187,6 +187,17 @@ #endif /* + * Instruction barrier + */ + .macro instr_sync +#if __LINUX_ARM_ARCH__ >= 7 + isb +#elif __LINUX_ARM_ARCH__ == 6 + mcr p15, 0, r0, c7, c5, 4 +#endif + .endm + +/* * SMP data memory barrier */ .macro smp_dmb mode diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h index 9abe7a07d5ac..fac79dceb736 100644 --- a/arch/arm/include/asm/bug.h +++ b/arch/arm/include/asm/bug.h @@ -32,7 +32,6 @@ #define __BUG(__file, __line, __value) \ do { \ - BUILD_BUG_ON(sizeof(struct bug_entry) != 12); \ asm volatile("1:\t" BUG_INSTR_TYPE #__value "\n" \ ".pushsection .rodata.str, \"aMS\", %progbits, 1\n" \ "2:\t.asciz " #__file "\n" \ diff --git a/arch/arm/include/asm/cti.h b/arch/arm/include/asm/cti.h new file mode 100644 index 000000000000..a0ada3ea4358 --- /dev/null +++ b/arch/arm/include/asm/cti.h @@ -0,0 +1,179 @@ +#ifndef __ASMARM_CTI_H +#define __ASMARM_CTI_H + +#include <asm/io.h> + +/* The registers' definition is from section 3.2 of + * Embedded Cross Trigger Revision: r0p0 + */ +#define CTICONTROL 0x000 +#define CTISTATUS 0x004 +#define CTILOCK 0x008 +#define CTIPROTECTION 0x00C +#define CTIINTACK 0x010 +#define CTIAPPSET 0x014 +#define CTIAPPCLEAR 0x018 +#define CTIAPPPULSE 0x01c +#define CTIINEN 0x020 +#define CTIOUTEN 0x0A0 +#define CTITRIGINSTATUS 0x130 +#define CTITRIGOUTSTATUS 0x134 +#define CTICHINSTATUS 0x138 +#define CTICHOUTSTATUS 0x13c +#define CTIPERIPHID0 0xFE0 +#define CTIPERIPHID1 0xFE4 +#define CTIPERIPHID2 0xFE8 +#define CTIPERIPHID3 0xFEC +#define CTIPCELLID0 0xFF0 +#define CTIPCELLID1 0xFF4 +#define CTIPCELLID2 0xFF8 +#define CTIPCELLID3 0xFFC + +/* The below are from section 3.6.4 of + * CoreSight v1.0 Architecture Specification + */ +#define LOCKACCESS 0xFB0 +#define LOCKSTATUS 0xFB4 + +/* write this value to LOCKACCESS will unlock the module, and + * other value will lock the module + */ +#define LOCKCODE 0xC5ACCE55 + +/** + * struct cti - cross trigger interface struct + * @base: mapped virtual address for the cti base + * @irq: irq number for the cti + * @trig_out_for_irq: triger out number which will cause + * the @irq happen + * + * cti struct used to operate cti registers. + */ +struct cti { + void __iomem *base; + int irq; + int trig_out_for_irq; +}; + +/** + * cti_init - initialize the cti instance + * @cti: cti instance + * @base: mapped virtual address for the cti base + * @irq: irq number for the cti + * @trig_out: triger out number which will cause + * the @irq happen + * + * called by machine code to pass the board dependent + * @base, @irq and @trig_out to cti. + */ +static inline void cti_init(struct cti *cti, + void __iomem *base, int irq, int trig_out) +{ + cti->base = base; + cti->irq = irq; + cti->trig_out_for_irq = trig_out; +} + +/** + * cti_map_trigger - use the @chan to map @trig_in to @trig_out + * @cti: cti instance + * @trig_in: trigger in number + * @trig_out: trigger out number + * @channel: channel number + * + * This function maps one trigger in of @trig_in to one trigger + * out of @trig_out using the channel @chan. + */ +static inline void cti_map_trigger(struct cti *cti, + int trig_in, int trig_out, int chan) +{ + void __iomem *base = cti->base; + unsigned long val; + + val = __raw_readl(base + CTIINEN + trig_in * 4); + val |= BIT(chan); + __raw_writel(val, base + CTIINEN + trig_in * 4); + + val = __raw_readl(base + CTIOUTEN + trig_out * 4); + val |= BIT(chan); + __raw_writel(val, base + CTIOUTEN + trig_out * 4); +} + +/** + * cti_enable - enable the cti module + * @cti: cti instance + * + * enable the cti module + */ +static inline void cti_enable(struct cti *cti) +{ + __raw_writel(0x1, cti->base + CTICONTROL); +} + +/** + * cti_disable - disable the cti module + * @cti: cti instance + * + * enable the cti module + */ +static inline void cti_disable(struct cti *cti) +{ + __raw_writel(0, cti->base + CTICONTROL); +} + +/** + * cti_irq_ack - clear the cti irq + * @cti: cti instance + * + * clear the cti irq + */ +static inline void cti_irq_ack(struct cti *cti) +{ + void __iomem *base = cti->base; + unsigned long val; + + val = __raw_readl(base + CTIINTACK); + val |= BIT(cti->trig_out_for_irq); + __raw_writel(val, base + CTIINTACK); +} + +/** + * cti_unlock - unlock cti module + * @cti: cti instance + * + * unlock the cti module, or else any writes to the cti + * module is not allowed. + */ +static inline void cti_unlock(struct cti *cti) +{ + void __iomem *base = cti->base; + unsigned long val; + + val = __raw_readl(base + LOCKSTATUS); + + if (val & 1) { + val = LOCKCODE; + __raw_writel(val, base + LOCKACCESS); + } +} + +/** + * cti_lock - lock cti module + * @cti: cti instance + * + * lock the cti module, so any writes to the cti + * module will be not allowed. + */ +static inline void cti_lock(struct cti *cti) +{ + void __iomem *base = cti->base; + unsigned long val; + + val = __raw_readl(base + LOCKSTATUS); + + if (!(val & 1)) { + val = ~LOCKCODE; + __raw_writel(val, base + LOCKACCESS); + } +} +#endif diff --git a/arch/arm/include/asm/edac.h b/arch/arm/include/asm/edac.h new file mode 100644 index 000000000000..0df7a2c1fc3d --- /dev/null +++ b/arch/arm/include/asm/edac.h @@ -0,0 +1,48 @@ +/* + * Copyright 2011 Calxeda, Inc. + * Based on PPC version Copyright 2007 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef ASM_EDAC_H +#define ASM_EDAC_H +/* + * ECC atomic, DMA, SMP and interrupt safe scrub function. + * Implements the per arch atomic_scrub() that EDAC use for software + * ECC scrubbing. It reads memory and then writes back the original + * value, allowing the hardware to detect and correct memory errors. + */ +static inline void atomic_scrub(void *va, u32 size) +{ +#if __LINUX_ARM_ARCH__ >= 6 + unsigned int *virt_addr = va; + unsigned int temp, temp2; + unsigned int i; + + for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) { + /* Very carefully read and write to memory atomically + * so we are interrupt, DMA and SMP safe. + */ + __asm__ __volatile__("\n" + "1: ldrex %0, [%2]\n" + " strex %1, %0, [%2]\n" + " teq %1, #0\n" + " bne 1b\n" + : "=&r"(temp), "=&r"(temp2) + : "r"(virt_addr) + : "cc"); + } +#endif +} + +#endif diff --git a/arch/arm/include/asm/entry-macro-vic2.S b/arch/arm/include/asm/entry-macro-vic2.S deleted file mode 100644 index 3ceb85e43850..000000000000 --- a/arch/arm/include/asm/entry-macro-vic2.S +++ /dev/null @@ -1,57 +0,0 @@ -/* arch/arm/include/asm/entry-macro-vic2.S - * - * Originally arch/arm/mach-s3c6400/include/mach/entry-macro.S - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * Low-level IRQ helper macros for a device with two VICs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - -/* This should be included from <mach/entry-macro.S> with the necessary - * defines for virtual addresses and IRQ bases for the two vics. - * - * The code needs the following defined: - * IRQ_VIC0_BASE IRQ number of VIC0's first IRQ - * IRQ_VIC1_BASE IRQ number of VIC1's first IRQ - * VA_VIC0 Virtual address of VIC0 - * VA_VIC1 Virtual address of VIC1 - * - * Note, code assumes VIC0's virtual address is an ARM immediate constant - * away from VIC1. -*/ - -#include <asm/hardware/vic.h> - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =VA_VIC0 - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - @ check the vic0 - mov \irqnr, #IRQ_VIC0_BASE + 31 - ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] - teq \irqstat, #0 - - @ otherwise try vic1 - addeq \tmp, \base, #(VA_VIC1 - VA_VIC0) - addeq \irqnr, \irqnr, #(IRQ_VIC1_BASE - IRQ_VIC0_BASE) - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat - .endm diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h index 11ad0bfbb0ad..7151753b0989 100644 --- a/arch/arm/include/asm/gpio.h +++ b/arch/arm/include/asm/gpio.h @@ -1,6 +1,10 @@ #ifndef _ARCH_ARM_GPIO_H #define _ARCH_ARM_GPIO_H +#if CONFIG_ARCH_NR_GPIO > 0 +#define ARCH_NR_GPIO CONFIG_ARCH_NR_GPIO +#endif + /* not all ARM platforms necessarily support this API ... */ #include <mach/gpio.h> diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h index ddf07a92a6c8..436e60b2cf7a 100644 --- a/arch/arm/include/asm/hardirq.h +++ b/arch/arm/include/asm/hardirq.h @@ -27,23 +27,6 @@ u64 smp_irq_stat_cpu(unsigned int cpu); #define arch_irq_stat_cpu smp_irq_stat_cpu -#if NR_IRQS > 512 -#define HARDIRQ_BITS 10 -#elif NR_IRQS > 256 -#define HARDIRQ_BITS 9 -#else -#define HARDIRQ_BITS 8 -#endif - -/* - * The hardirq mask has to be large enough to have space - * for potentially all IRQ sources in the system nesting - * on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - #define __ARCH_IRQ_EXIT_IRQS_DISABLED 1 #endif /* __ASM_HARDIRQ_H */ diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S deleted file mode 100644 index 74ebc803904d..000000000000 --- a/arch/arm/include/asm/hardware/entry-macro-gic.S +++ /dev/null @@ -1,60 +0,0 @@ -/* - * arch/arm/include/asm/hardware/entry-macro-gic.S - * - * Low-level IRQ helper macros for GIC - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <asm/hardware/gic.h> - -#ifndef HAVE_GET_IRQNR_PREAMBLE - .macro get_irqnr_preamble, base, tmp - ldr \base, =gic_cpu_base_addr - ldr \base, [\base] - .endm -#endif - -/* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * A simple read from the controller will tell us the number of the highest - * priority enabled interrupt. We then just need to check whether it is in the - * valid range for an IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - ldr \irqstat, [\base, #GIC_CPU_INTACK] - /* bits 12-10 = src CPU, 9-0 = int # */ - - ldr \tmp, =1021 - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #15 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - .endm - -/* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h index 3e91f22046f5..4bdfe0018696 100644 --- a/arch/arm/include/asm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -36,30 +36,22 @@ #include <linux/irqdomain.h> struct device_node; -extern void __iomem *gic_cpu_base_addr; extern struct irq_chip gic_arch_extn; -void gic_init(unsigned int, int, void __iomem *, void __iomem *); +void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *, + u32 offset); int gic_of_init(struct device_node *node, struct device_node *parent); void gic_secondary_init(unsigned int); +void gic_handle_irq(struct pt_regs *regs); void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); -struct gic_chip_data { - void __iomem *dist_base; - void __iomem *cpu_base; -#ifdef CONFIG_CPU_PM - u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)]; - u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)]; - u32 saved_spi_target[DIV_ROUND_UP(1020, 4)]; - u32 __percpu *saved_ppi_enable; - u32 __percpu *saved_ppi_conf; -#endif -#ifdef CONFIG_IRQ_DOMAIN - struct irq_domain domain; -#endif - unsigned int gic_irqs; -}; +static inline void gic_init(unsigned int nr, int start, + void __iomem *dist , void __iomem *cpu) +{ + gic_init_bases(nr, start, dist, cpu, 0); +} + #endif #endif diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h index 5daea2961d48..077c32326c63 100644 --- a/arch/arm/include/asm/hardware/iop3xx.h +++ b/arch/arm/include/asm/hardware/iop3xx.h @@ -234,6 +234,7 @@ extern int iop3xx_get_init_atu(void); void iop3xx_map_io(void); void iop_init_cp6_handler(void); void iop_init_time(unsigned long tickrate); +void iop3xx_restart(char, const char *); static inline u32 read_tmr0(void) { diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h index 5d72550a8097..f42ebd619590 100644 --- a/arch/arm/include/asm/hardware/vic.h +++ b/arch/arm/include/asm/hardware/vic.h @@ -41,7 +41,15 @@ #define VIC_PL192_VECT_ADDR 0xF00 #ifndef __ASSEMBLY__ +#include <linux/compiler.h> +#include <linux/types.h> + +struct device_node; +struct pt_regs; + void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources); -#endif +int vic_of_init(struct device_node *node, struct device_node *parent); +void vic_handle_irq(struct pt_regs *regs); +#endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/idmap.h b/arch/arm/include/asm/idmap.h new file mode 100644 index 000000000000..bf863edb517d --- /dev/null +++ b/arch/arm/include/asm/idmap.h @@ -0,0 +1,14 @@ +#ifndef __ASM_IDMAP_H +#define __ASM_IDMAP_H + +#include <linux/compiler.h> +#include <asm/pgtable.h> + +/* Tag a function as requiring to be executed via an identity mapping. */ +#define __idmap __section(.idmap.text) noinline notrace + +extern pgd_t *idmap_pgd; + +void setup_mm_for_reboot(void); + +#endif /* __ASM_IDMAP_H */ diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 065d100fa63e..9275828feb3d 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -27,6 +27,7 @@ #include <asm/byteorder.h> #include <asm/memory.h> #include <asm/system.h> +#include <asm-generic/pci_iomap.h> /* * ISA I/O bus memory addresses are 1:1 with the physical address. @@ -306,7 +307,6 @@ extern void ioport_unmap(void __iomem *addr); struct pci_dev; -extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen); extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); /* diff --git a/arch/arm/include/asm/ipcbuf.h b/arch/arm/include/asm/ipcbuf.h index 97683975f7df..84c7e51cb6d0 100644 --- a/arch/arm/include/asm/ipcbuf.h +++ b/arch/arm/include/asm/ipcbuf.h @@ -1,29 +1 @@ -#ifndef __ASMARM_IPCBUF_H -#define __ASMARM_IPCBUF_H - -/* - * The ipc64_perm structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __ASMARM_IPCBUF_H */ +#include <asm-generic/ipcbuf.h> diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 2b0efc3104ac..d7692cafde7f 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -19,7 +19,7 @@ struct machine_desc { unsigned int nr; /* architecture number */ const char *name; /* architecture name */ unsigned long atag_offset; /* tagged list (relative) */ - const char **dt_compat; /* array of device tree + const char *const *dt_compat; /* array of device tree * 'compatible' strings */ unsigned int nr_irqs; /* number of IRQs */ @@ -31,10 +31,10 @@ struct machine_desc { unsigned int video_start; /* start of video RAM */ unsigned int video_end; /* end of video RAM */ - unsigned int reserve_lp0 :1; /* never has lp0 */ - unsigned int reserve_lp1 :1; /* never has lp1 */ - unsigned int reserve_lp2 :1; /* never has lp2 */ - unsigned int soft_reboot :1; /* soft reboot */ + unsigned char reserve_lp0 :1; /* never has lp0 */ + unsigned char reserve_lp1 :1; /* never has lp1 */ + unsigned char reserve_lp2 :1; /* never has lp2 */ + char restart_mode; /* default restart mode */ void (*fixup)(struct tag *, char **, struct meminfo *); void (*reserve)(void);/* reserve mem blocks */ @@ -46,6 +46,7 @@ struct machine_desc { #ifdef CONFIG_MULTI_IRQ_HANDLER void (*handle_irq)(struct pt_regs *); #endif + void (*restart)(char, const char *); }; /* diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index 186efd4e05c9..d943b7d20f11 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -40,7 +40,7 @@ struct pci_sys_data { u64 mem_offset; /* bus->cpu memory mapping offset */ unsigned long io_offset; /* bus->cpu IO mapping offset */ struct pci_bus *bus; /* PCI bus */ - struct resource *resource[3]; /* Primary PCI bus resources */ + struct list_head resources; /* root bus resources (apertures) */ /* Bridge swizzling */ u8 (*swizzle)(struct pci_dev *, u8 *); /* IRQ mapping */ diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h index d5adaae5ee2c..f73c908b7fa0 100644 --- a/arch/arm/include/asm/mach/time.h +++ b/arch/arm/include/asm/mach/time.h @@ -10,8 +10,6 @@ #ifndef __ASM_ARM_MACH_TIME_H #define __ASM_ARM_MACH_TIME_H -#include <linux/sysdev.h> - /* * This is our kernel timer structure. * diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h new file mode 100644 index 000000000000..c0efdd60966f --- /dev/null +++ b/arch/arm/include/asm/opcodes.h @@ -0,0 +1,20 @@ +/* + * arch/arm/include/asm/opcodes.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_OPCODES_H +#define __ASM_ARM_OPCODES_H + +#ifndef __ASSEMBLY__ +extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); +#endif + +#define ARM_OPCODE_CONDTEST_FAIL 0 +#define ARM_OPCODE_CONDTEST_PASS 1 +#define ARM_OPCODE_CONDTEST_UNCOND 2 + +#endif /* __ASM_ARM_OPCODES_H */ diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index ca94653f1ecb..97b440c25c58 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -151,7 +151,11 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from, #define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) extern void copy_page(void *to, const void *from); +#ifdef CONFIG_ARM_LPAE +#include <asm/pgtable-3level-types.h> +#else #include <asm/pgtable-2level-types.h> +#endif #endif /* CONFIG_MMU */ diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 2b1f245db0c6..da337ba57ffd 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -31,18 +31,6 @@ static inline int pci_proc_domain(struct pci_bus *bus) } #endif /* CONFIG_PCI_DOMAINS */ -#ifdef CONFIG_PCI_HOST_ITE8152 -/* ITE bridge requires setting latency timer to avoid early bus access - termination by PIC bus mater devices -*/ -extern void pcibios_set_master(struct pci_dev *dev); -#else -static inline void pcibios_set_master(struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} -#endif - static inline void pcibios_penalize_isa_irq(int irq, int active) { /* We don't do dynamic PCI IRQ allocation */ diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 0f8e3827a89b..99cfe3607989 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -32,7 +32,4 @@ enum arm_perf_pmu_ids { extern enum arm_perf_pmu_ids armpmu_get_pmu_id(void); -extern int -armpmu_get_max_events(void); - #endif /* __ARM_PERF_EVENT_H__ */ diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h index 3e08fd3fbb6b..943504f53f57 100644 --- a/arch/arm/include/asm/pgalloc.h +++ b/arch/arm/include/asm/pgalloc.h @@ -25,12 +25,34 @@ #define _PAGE_USER_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER)) #define _PAGE_KERNEL_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL)) +#ifdef CONFIG_ARM_LPAE + +static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr) +{ + return (pmd_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT); +} + +static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) +{ + BUG_ON((unsigned long)pmd & (PAGE_SIZE-1)); + free_page((unsigned long)pmd); +} + +static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) +{ + set_pud(pud, __pud(__pa(pmd) | PMD_TYPE_TABLE)); +} + +#else /* !CONFIG_ARM_LPAE */ + /* * Since we have only two-level page tables, these are trivial */ #define pmd_alloc_one(mm,addr) ({ BUG(); ((pmd_t *)2); }) #define pmd_free(mm, pmd) do { } while (0) -#define pgd_populate(mm,pmd,pte) BUG() +#define pud_populate(mm,pmd,pte) BUG() + +#endif /* CONFIG_ARM_LPAE */ extern pgd_t *pgd_alloc(struct mm_struct *mm); extern void pgd_free(struct mm_struct *mm, pgd_t *pgd); @@ -109,7 +131,9 @@ static inline void __pmd_populate(pmd_t *pmdp, phys_addr_t pte, { pmdval_t pmdval = (pte + PTE_HWTABLE_OFF) | prot; pmdp[0] = __pmd(pmdval); +#ifndef CONFIG_ARM_LPAE pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t)); +#endif flush_pmd_entry(pmdp); } diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h index 470457e1cfc5..2317a71c8f8e 100644 --- a/arch/arm/include/asm/pgtable-2level.h +++ b/arch/arm/include/asm/pgtable-2level.h @@ -140,4 +140,45 @@ #define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 0x0b) << 2) /* 1011 */ #define L_PTE_MT_MASK (_AT(pteval_t, 0x0f) << 2) +#ifndef __ASSEMBLY__ + +/* + * The "pud_xxx()" functions here are trivial when the pmd is folded into + * the pud: the pud entry is never bad, always exists, and can't be set or + * cleared. + */ +#define pud_none(pud) (0) +#define pud_bad(pud) (0) +#define pud_present(pud) (1) +#define pud_clear(pudp) do { } while (0) +#define set_pud(pud,pudp) do { } while (0) + +static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr) +{ + return (pmd_t *)pud; +} + +#define pmd_bad(pmd) (pmd_val(pmd) & 2) + +#define copy_pmd(pmdpd,pmdps) \ + do { \ + pmdpd[0] = pmdps[0]; \ + pmdpd[1] = pmdps[1]; \ + flush_pmd_entry(pmdpd); \ + } while (0) + +#define pmd_clear(pmdp) \ + do { \ + pmdp[0] = __pmd(0); \ + pmdp[1] = __pmd(0); \ + clean_pmd_entry(pmdp); \ + } while (0) + +/* we don't need complex calculations here as the pmd is folded into the pgd */ +#define pmd_addr_end(addr,end) (end) + +#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext) + +#endif /* __ASSEMBLY__ */ + #endif /* _ASM_PGTABLE_2LEVEL_H */ diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h new file mode 100644 index 000000000000..d7952824c5c4 --- /dev/null +++ b/arch/arm/include/asm/pgtable-3level-hwdef.h @@ -0,0 +1,77 @@ +/* + * arch/arm/include/asm/pgtable-3level-hwdef.h + * + * Copyright (C) 2011 ARM Ltd. + * Author: Catalin Marinas <catalin.marinas@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_PGTABLE_3LEVEL_HWDEF_H +#define _ASM_PGTABLE_3LEVEL_HWDEF_H + +/* + * Hardware page table definitions. + * + * + Level 1/2 descriptor + * - common + */ +#define PMD_TYPE_MASK (_AT(pmdval_t, 3) << 0) +#define PMD_TYPE_FAULT (_AT(pmdval_t, 0) << 0) +#define PMD_TYPE_TABLE (_AT(pmdval_t, 3) << 0) +#define PMD_TYPE_SECT (_AT(pmdval_t, 1) << 0) +#define PMD_BIT4 (_AT(pmdval_t, 0)) +#define PMD_DOMAIN(x) (_AT(pmdval_t, 0)) + +/* + * - section + */ +#define PMD_SECT_BUFFERABLE (_AT(pmdval_t, 1) << 2) +#define PMD_SECT_CACHEABLE (_AT(pmdval_t, 1) << 3) +#define PMD_SECT_S (_AT(pmdval_t, 3) << 8) +#define PMD_SECT_AF (_AT(pmdval_t, 1) << 10) +#define PMD_SECT_nG (_AT(pmdval_t, 1) << 11) +#define PMD_SECT_XN (_AT(pmdval_t, 1) << 54) +#define PMD_SECT_AP_WRITE (_AT(pmdval_t, 0)) +#define PMD_SECT_AP_READ (_AT(pmdval_t, 0)) +#define PMD_SECT_TEX(x) (_AT(pmdval_t, 0)) + +/* + * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers). + */ +#define PMD_SECT_UNCACHED (_AT(pmdval_t, 0) << 2) /* strongly ordered */ +#define PMD_SECT_BUFFERED (_AT(pmdval_t, 1) << 2) /* normal non-cacheable */ +#define PMD_SECT_WT (_AT(pmdval_t, 2) << 2) /* normal inner write-through */ +#define PMD_SECT_WB (_AT(pmdval_t, 3) << 2) /* normal inner write-back */ +#define PMD_SECT_WBWA (_AT(pmdval_t, 7) << 2) /* normal inner write-alloc */ + +/* + * + Level 3 descriptor (PTE) + */ +#define PTE_TYPE_MASK (_AT(pteval_t, 3) << 0) +#define PTE_TYPE_FAULT (_AT(pteval_t, 0) << 0) +#define PTE_TYPE_PAGE (_AT(pteval_t, 3) << 0) +#define PTE_BUFFERABLE (_AT(pteval_t, 1) << 2) /* AttrIndx[0] */ +#define PTE_CACHEABLE (_AT(pteval_t, 1) << 3) /* AttrIndx[1] */ +#define PTE_EXT_SHARED (_AT(pteval_t, 3) << 8) /* SH[1:0], inner shareable */ +#define PTE_EXT_AF (_AT(pteval_t, 1) << 10) /* Access Flag */ +#define PTE_EXT_NG (_AT(pteval_t, 1) << 11) /* nG */ +#define PTE_EXT_XN (_AT(pteval_t, 1) << 54) /* XN */ + +/* + * 40-bit physical address supported. + */ +#define PHYS_MASK_SHIFT (40) +#define PHYS_MASK ((1ULL << PHYS_MASK_SHIFT) - 1) + +#endif diff --git a/arch/arm/include/asm/pgtable-3level-types.h b/arch/arm/include/asm/pgtable-3level-types.h new file mode 100644 index 000000000000..921aa30259c4 --- /dev/null +++ b/arch/arm/include/asm/pgtable-3level-types.h @@ -0,0 +1,70 @@ +/* + * arch/arm/include/asm/pgtable-3level-types.h + * + * Copyright (C) 2011 ARM Ltd. + * Author: Catalin Marinas <catalin.marinas@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_PGTABLE_3LEVEL_TYPES_H +#define _ASM_PGTABLE_3LEVEL_TYPES_H + +#include <asm/types.h> + +typedef u64 pteval_t; +typedef u64 pmdval_t; +typedef u64 pgdval_t; + +#undef STRICT_MM_TYPECHECKS + +#ifdef STRICT_MM_TYPECHECKS + +/* + * These are used to make use of C type-checking.. + */ +typedef struct { pteval_t pte; } pte_t; +typedef struct { pmdval_t pmd; } pmd_t; +typedef struct { pgdval_t pgd; } pgd_t; +typedef struct { pteval_t pgprot; } pgprot_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((x).pmd) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +#else /* !STRICT_MM_TYPECHECKS */ + +typedef pteval_t pte_t; +typedef pmdval_t pmd_t; +typedef pgdval_t pgd_t; +typedef pteval_t pgprot_t; + +#define pte_val(x) (x) +#define pmd_val(x) (x) +#define pgd_val(x) (x) +#define pgprot_val(x) (x) + +#define __pte(x) (x) +#define __pmd(x) (x) +#define __pgd(x) (x) +#define __pgprot(x) (x) + +#endif /* STRICT_MM_TYPECHECKS */ + +#endif /* _ASM_PGTABLE_3LEVEL_TYPES_H */ diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h new file mode 100644 index 000000000000..759af70f9a0a --- /dev/null +++ b/arch/arm/include/asm/pgtable-3level.h @@ -0,0 +1,155 @@ +/* + * arch/arm/include/asm/pgtable-3level.h + * + * Copyright (C) 2011 ARM Ltd. + * Author: Catalin Marinas <catalin.marinas@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_PGTABLE_3LEVEL_H +#define _ASM_PGTABLE_3LEVEL_H + +/* + * With LPAE, there are 3 levels of page tables. Each level has 512 entries of + * 8 bytes each, occupying a 4K page. The first level table covers a range of + * 512GB, each entry representing 1GB. Since we are limited to 4GB input + * address range, only 4 entries in the PGD are used. + * + * There are enough spare bits in a page table entry for the kernel specific + * state. + */ +#define PTRS_PER_PTE 512 +#define PTRS_PER_PMD 512 +#define PTRS_PER_PGD 4 + +#define PTE_HWTABLE_PTRS (PTRS_PER_PTE) +#define PTE_HWTABLE_OFF (0) +#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u64)) + +/* + * PGDIR_SHIFT determines the size a top-level page table entry can map. + */ +#define PGDIR_SHIFT 30 + +/* + * PMD_SHIFT determines the size a middle-level page table entry can map. + */ +#define PMD_SHIFT 21 + +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * section address mask and size definitions. + */ +#define SECTION_SHIFT 21 +#define SECTION_SIZE (1UL << SECTION_SHIFT) +#define SECTION_MASK (~(SECTION_SIZE-1)) + +#define USER_PTRS_PER_PGD (PAGE_OFFSET / PGDIR_SIZE) + +/* + * "Linux" PTE definitions for LPAE. + * + * These bits overlap with the hardware bits but the naming is preserved for + * consistency with the classic page table format. + */ +#define L_PTE_PRESENT (_AT(pteval_t, 3) << 0) /* Valid */ +#define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ +#define L_PTE_BUFFERABLE (_AT(pteval_t, 1) << 2) /* AttrIndx[0] */ +#define L_PTE_CACHEABLE (_AT(pteval_t, 1) << 3) /* AttrIndx[1] */ +#define L_PTE_USER (_AT(pteval_t, 1) << 6) /* AP[1] */ +#define L_PTE_RDONLY (_AT(pteval_t, 1) << 7) /* AP[2] */ +#define L_PTE_SHARED (_AT(pteval_t, 3) << 8) /* SH[1:0], inner shareable */ +#define L_PTE_YOUNG (_AT(pteval_t, 1) << 10) /* AF */ +#define L_PTE_XN (_AT(pteval_t, 1) << 54) /* XN */ +#define L_PTE_DIRTY (_AT(pteval_t, 1) << 55) /* unused */ +#define L_PTE_SPECIAL (_AT(pteval_t, 1) << 56) /* unused */ + +/* + * To be used in assembly code with the upper page attributes. + */ +#define L_PTE_XN_HIGH (1 << (54 - 32)) +#define L_PTE_DIRTY_HIGH (1 << (55 - 32)) + +/* + * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers). + */ +#define L_PTE_MT_UNCACHED (_AT(pteval_t, 0) << 2) /* strongly ordered */ +#define L_PTE_MT_BUFFERABLE (_AT(pteval_t, 1) << 2) /* normal non-cacheable */ +#define L_PTE_MT_WRITETHROUGH (_AT(pteval_t, 2) << 2) /* normal inner write-through */ +#define L_PTE_MT_WRITEBACK (_AT(pteval_t, 3) << 2) /* normal inner write-back */ +#define L_PTE_MT_WRITEALLOC (_AT(pteval_t, 7) << 2) /* normal inner write-alloc */ +#define L_PTE_MT_DEV_SHARED (_AT(pteval_t, 4) << 2) /* device */ +#define L_PTE_MT_DEV_NONSHARED (_AT(pteval_t, 4) << 2) /* device */ +#define L_PTE_MT_DEV_WC (_AT(pteval_t, 1) << 2) /* normal non-cacheable */ +#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 3) << 2) /* normal inner write-back */ +#define L_PTE_MT_MASK (_AT(pteval_t, 7) << 2) + +/* + * Software PGD flags. + */ +#define L_PGD_SWAPPER (_AT(pgdval_t, 1) << 55) /* swapper_pg_dir entry */ + +#ifndef __ASSEMBLY__ + +#define pud_none(pud) (!pud_val(pud)) +#define pud_bad(pud) (!(pud_val(pud) & 2)) +#define pud_present(pud) (pud_val(pud)) + +#define pud_clear(pudp) \ + do { \ + *pudp = __pud(0); \ + clean_pmd_entry(pudp); \ + } while (0) + +#define set_pud(pudp, pud) \ + do { \ + *pudp = pud; \ + flush_pmd_entry(pudp); \ + } while (0) + +static inline pmd_t *pud_page_vaddr(pud_t pud) +{ + return __va(pud_val(pud) & PHYS_MASK & (s32)PAGE_MASK); +} + +/* Find an entry in the second-level page table.. */ +#define pmd_index(addr) (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)) +static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr) +{ + return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(addr); +} + +#define pmd_bad(pmd) (!(pmd_val(pmd) & 2)) + +#define copy_pmd(pmdpd,pmdps) \ + do { \ + *pmdpd = *pmdps; \ + flush_pmd_entry(pmdpd); \ + } while (0) + +#define pmd_clear(pmdp) \ + do { \ + *pmdp = __pmd(0); \ + clean_pmd_entry(pmdp); \ + } while (0) + +#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,__pte(pte_val(pte)|(ext))) + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_PGTABLE_3LEVEL_H */ diff --git a/arch/arm/include/asm/pgtable-hwdef.h b/arch/arm/include/asm/pgtable-hwdef.h index 183111164ce9..8426229ba292 100644 --- a/arch/arm/include/asm/pgtable-hwdef.h +++ b/arch/arm/include/asm/pgtable-hwdef.h @@ -10,6 +10,10 @@ #ifndef _ASMARM_PGTABLE_HWDEF_H #define _ASMARM_PGTABLE_HWDEF_H +#ifdef CONFIG_ARM_LPAE +#include <asm/pgtable-3level-hwdef.h> +#else #include <asm/pgtable-2level-hwdef.h> +#endif #endif diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 9451dce3a553..f66626d71e7d 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -11,20 +11,24 @@ #define _ASMARM_PGTABLE_H #include <linux/const.h> -#include <asm-generic/4level-fixup.h> #include <asm/proc-fns.h> #ifndef CONFIG_MMU +#include <asm-generic/4level-fixup.h> #include "pgtable-nommu.h" #else +#include <asm-generic/pgtable-nopud.h> #include <asm/memory.h> -#include <mach/vmalloc.h> #include <asm/pgtable-hwdef.h> +#ifdef CONFIG_ARM_LPAE +#include <asm/pgtable-3level.h> +#else #include <asm/pgtable-2level.h> +#endif /* * Just any arbitrary offset to the start of the vmalloc VM area: the @@ -33,15 +37,10 @@ * any out-of-bounds memory accesses will hopefully be caught. * The vmalloc() routines leaves a hole of 4kB between each vmalloced * area for the same reason. ;) - * - * Note that platforms may override VMALLOC_START, but they must provide - * VMALLOC_END. VMALLOC_END defines the (exclusive) limit of this space, - * which may not overlap IO space. */ -#ifndef VMALLOC_START #define VMALLOC_OFFSET (8*1024*1024) #define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) -#endif +#define VMALLOC_END 0xff000000UL #define LIBRARY_TEXT_START 0x0c000000 @@ -163,39 +162,8 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; /* to find an entry in a kernel page-table-directory */ #define pgd_offset_k(addr) pgd_offset(&init_mm, addr) -/* - * The "pgd_xxx()" functions here are trivial for a folded two-level - * setup: the pgd is never bad, and a pmd always exists (as it's folded - * into the pgd entry) - */ -#define pgd_none(pgd) (0) -#define pgd_bad(pgd) (0) -#define pgd_present(pgd) (1) -#define pgd_clear(pgdp) do { } while (0) -#define set_pgd(pgd,pgdp) do { } while (0) -#define set_pud(pud,pudp) do { } while (0) - - -/* Find an entry in the second-level page table.. */ -#define pmd_offset(dir, addr) ((pmd_t *)(dir)) - #define pmd_none(pmd) (!pmd_val(pmd)) #define pmd_present(pmd) (pmd_val(pmd)) -#define pmd_bad(pmd) (pmd_val(pmd) & 2) - -#define copy_pmd(pmdpd,pmdps) \ - do { \ - pmdpd[0] = pmdps[0]; \ - pmdpd[1] = pmdps[1]; \ - flush_pmd_entry(pmdpd); \ - } while (0) - -#define pmd_clear(pmdp) \ - do { \ - pmdp[0] = __pmd(0); \ - pmdp[1] = __pmd(0); \ - clean_pmd_entry(pmdp); \ - } while (0) static inline pte_t *pmd_page_vaddr(pmd_t pmd) { @@ -204,10 +172,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK)) -/* we don't need complex calculations here as the pmd is folded into the pgd */ -#define pmd_addr_end(addr,end) (end) - - #ifndef CONFIG_HIGHPTE #define __pte_map(pmd) pmd_page_vaddr(*(pmd)) #define __pte_unmap(pte) do { } while (0) @@ -229,7 +193,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_page(pte) pfn_to_page(pte_pfn(pte)) #define mk_pte(page,prot) pfn_pte(page_to_pfn(page), prot) -#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext) #define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) #if __LINUX_ARM_ARCH__ < 6 @@ -336,6 +299,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) * We provide our own arch_get_unmapped_area to cope with VIPT caches. */ #define HAVE_ARCH_UNMAPPED_AREA +#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN /* * remap a physical page `pfn' of size `size' with page protection `prot' @@ -346,9 +310,6 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) #define pgtable_cache_init() do { } while (0) -void identity_mapping_add(pgd_t *, unsigned long, unsigned long); -void identity_mapping_del(pgd_t *, unsigned long, unsigned long); - #endif /* !__ASSEMBLY__ */ #endif /* CONFIG_MMU */ diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 0bda22c094a6..b5a5be2536c1 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -27,13 +27,22 @@ enum arm_pmu_type { /* * struct arm_pmu_platdata - ARM PMU platform data * - * @handle_irq: an optional handler which will be called from the interrupt and - * passed the address of the low level handler, and can be used to implement - * any platform specific handling before or after calling it. + * @handle_irq: an optional handler which will be called from the + * interrupt and passed the address of the low level handler, + * and can be used to implement any platform specific handling + * before or after calling it. + * @enable_irq: an optional handler which will be called after + * request_irq and be used to handle some platform specific + * irq enablement + * @disable_irq: an optional handler which will be called before + * free_irq and be used to handle some platform specific + * irq disablement */ struct arm_pmu_platdata { irqreturn_t (*handle_irq)(int irq, void *dev, irq_handler_t pmu_handler); + void (*enable_irq)(int irq); + void (*disable_irq)(int irq); }; #ifdef CONFIG_CPU_HAS_PMU diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index 9e92cb205e65..f3628fb3d2b3 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -65,7 +65,11 @@ extern struct processor { * Set a possibly extended PTE. Non-extended PTEs should * ignore 'ext'. */ +#ifdef CONFIG_ARM_LPAE + void (*set_pte_ext)(pte_t *ptep, pte_t pte); +#else void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext); +#endif /* Suspend/resume */ unsigned int suspend_size; @@ -79,7 +83,11 @@ extern void cpu_proc_fin(void); extern int cpu_do_idle(void); extern void cpu_dcache_clean_area(void *, int); extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm); +#ifdef CONFIG_ARM_LPAE +extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte); +#else extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +#endif extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); /* These three are private to arch/arm/kernel/suspend.c */ @@ -107,6 +115,18 @@ extern void cpu_resume(void); #define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm) +#ifdef CONFIG_ARM_LPAE +#define cpu_get_pgd() \ + ({ \ + unsigned long pg, pg2; \ + __asm__("mrrc p15, 0, %0, %1, c2" \ + : "=r" (pg), "=r" (pg2) \ + : \ + : "cc"); \ + pg &= ~(PTRS_PER_PGD*sizeof(pgd_t)-1); \ + (pgd_t *)phys_to_virt(pg); \ + }) +#else #define cpu_get_pgd() \ ({ \ unsigned long pg; \ @@ -115,6 +135,7 @@ extern void cpu_resume(void); pg &= ~0x3fff; \ (pgd_t *)phys_to_virt(pg); \ }) +#endif #endif diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index b2d9df5667af..ce280b8d613c 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -123,6 +123,8 @@ static inline void prefetch(const void *ptr) #endif +#define HAVE_ARCH_PICK_MMAP_LAYOUT + #endif #endif /* __ASM_ARM_PROCESSOR_H */ diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h index 6f65ca86a5ec..ee0363307918 100644 --- a/arch/arm/include/asm/prom.h +++ b/arch/arm/include/asm/prom.h @@ -13,7 +13,6 @@ #ifdef CONFIG_OF -#include <asm/setup.h> #include <asm/irq.h> extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys); diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h index c8e6ddf3e860..e3f757263438 100644 --- a/arch/arm/include/asm/sched_clock.h +++ b/arch/arm/include/asm/sched_clock.h @@ -8,113 +8,7 @@ #ifndef ASM_SCHED_CLOCK #define ASM_SCHED_CLOCK -#include <linux/kernel.h> -#include <linux/types.h> - -struct clock_data { - u64 epoch_ns; - u32 epoch_cyc; - u32 epoch_cyc_copy; - u32 mult; - u32 shift; -}; - -#define DEFINE_CLOCK_DATA(name) struct clock_data name - -static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift) -{ - return (cyc * mult) >> shift; -} - -/* - * Atomically update the sched_clock epoch. Your update callback will - * be called from a timer before the counter wraps - read the current - * counter value, and call this function to safely move the epochs - * forward. Only use this from the update callback. - */ -static inline void update_sched_clock(struct clock_data *cd, u32 cyc, u32 mask) -{ - unsigned long flags; - u64 ns = cd->epoch_ns + - cyc_to_ns((cyc - cd->epoch_cyc) & mask, cd->mult, cd->shift); - - /* - * Write epoch_cyc and epoch_ns in a way that the update is - * detectable in cyc_to_fixed_sched_clock(). - */ - raw_local_irq_save(flags); - cd->epoch_cyc = cyc; - smp_wmb(); - cd->epoch_ns = ns; - smp_wmb(); - cd->epoch_cyc_copy = cyc; - raw_local_irq_restore(flags); -} - -/* - * If your clock rate is known at compile time, using this will allow - * you to optimize the mult/shift loads away. This is paired with - * init_fixed_sched_clock() to ensure that your mult/shift are correct. - */ -static inline unsigned long long cyc_to_fixed_sched_clock(struct clock_data *cd, - u32 cyc, u32 mask, u32 mult, u32 shift) -{ - u64 epoch_ns; - u32 epoch_cyc; - - /* - * Load the epoch_cyc and epoch_ns atomically. We do this by - * ensuring that we always write epoch_cyc, epoch_ns and - * epoch_cyc_copy in strict order, and read them in strict order. - * If epoch_cyc and epoch_cyc_copy are not equal, then we're in - * the middle of an update, and we should repeat the load. - */ - do { - epoch_cyc = cd->epoch_cyc; - smp_rmb(); - epoch_ns = cd->epoch_ns; - smp_rmb(); - } while (epoch_cyc != cd->epoch_cyc_copy); - - return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, mult, shift); -} - -/* - * Otherwise, you need to use this, which will obtain the mult/shift - * from the clock_data structure. Use init_sched_clock() with this. - */ -static inline unsigned long long cyc_to_sched_clock(struct clock_data *cd, - u32 cyc, u32 mask) -{ - return cyc_to_fixed_sched_clock(cd, cyc, mask, cd->mult, cd->shift); -} - -/* - * Initialize the clock data - calculate the appropriate multiplier - * and shift. Also setup a timer to ensure that the epoch is refreshed - * at the appropriate time interval, which will call your update - * handler. - */ -void init_sched_clock(struct clock_data *, void (*)(void), - unsigned int, unsigned long); - -/* - * Use this initialization function rather than init_sched_clock() if - * you're using cyc_to_fixed_sched_clock, which will warn if your - * constants are incorrect. - */ -static inline void init_fixed_sched_clock(struct clock_data *cd, - void (*update)(void), unsigned int bits, unsigned long rate, - u32 mult, u32 shift) -{ - init_sched_clock(cd, update, bits, rate); - if (cd->mult != mult || cd->shift != shift) { - pr_crit("sched_clock: wrong multiply/shift: %u>>%u vs calculated %u>>%u\n" - "sched_clock: fix multiply/shift to avoid scheduler hiccups\n", - mult, shift, cd->mult, cd->shift); - } -} - extern void sched_clock_postinit(void); +extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate); #endif diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 915696dd9c7c..23ebc0c82a39 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -192,11 +192,7 @@ static const struct tagtable __tagtable_##fn __tag = { tag, fn } /* * Memory map description */ -#ifdef CONFIG_ARCH_EP93XX -# define NR_BANKS 16 -#else -# define NR_BANKS 8 -#endif +#define NR_BANKS CONFIG_ARM_NR_BANKS struct membank { phys_addr_t start; diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h index 90ffd04b8e74..dec6f9afb3cf 100644 --- a/arch/arm/include/asm/socket.h +++ b/arch/arm/include/asm/socket.h @@ -62,4 +62,7 @@ #define SO_RXQ_OVFL 40 +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS + #endif /* _ASM_SOCKET_H */ diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h index 9997ad20eff1..32ee164a2f6b 100644 --- a/arch/arm/include/asm/swab.h +++ b/arch/arm/include/asm/swab.h @@ -24,12 +24,13 @@ #if defined(__KERNEL__) && __LINUX_ARM_ARCH__ >= 6 -static inline __attribute_const__ __u16 __arch_swab16(__u16 x) +static inline __attribute_const__ __u32 __arch_swahb32(__u32 x) { __asm__ ("rev16 %0, %1" : "=r" (x) : "r" (x)); return x; } -#define __arch_swab16 __arch_swab16 +#define __arch_swahb32 __arch_swahb32 +#define __arch_swab16(x) ((__u16)__arch_swahb32(x)) static inline __attribute_const__ __u32 __arch_swab32(__u32 x) { diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 984014b92647..e4c96cc6ec0c 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -80,6 +80,14 @@ struct siginfo; void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, unsigned long err, unsigned long trap); +#ifdef CONFIG_ARM_LPAE +#define FAULT_CODE_ALIGNMENT 33 +#define FAULT_CODE_DEBUG 34 +#else +#define FAULT_CODE_ALIGNMENT 1 +#define FAULT_CODE_DEBUG 2 +#endif + void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *), int sig, int code, const char *name); @@ -100,7 +108,7 @@ extern void __show_regs(struct pt_regs *); extern int __pure cpu_architecture(void); extern void cpu_init(void); -void arm_machine_restart(char mode, const char *cmd); +void soft_restart(unsigned long); extern void (*arm_pm_restart)(char str, const char *cmd); #define UDBG_UNDEFINED (1 << 0) diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 7b5cc8dae06e..0f30c3a78fc1 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -142,7 +142,6 @@ extern void vfp_flush_hwstate(struct thread_info *); #define TIF_POLLING_NRFLAG 16 #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ -#define TIF_FREEZE 19 #define TIF_RESTORE_SIGMASK 20 #define TIF_SECCOMP 21 @@ -152,7 +151,6 @@ extern void vfp_flush_hwstate(struct thread_info *); #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) -#define _TIF_FREEZE (1 << TIF_FREEZE) #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_SECCOMP (1 << TIF_SECCOMP) diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 265f908c4a6e..5d3ed7e38561 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -202,8 +202,18 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, tlb_remove_page(tlb, pte); } +static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp, + unsigned long addr) +{ +#ifdef CONFIG_ARM_LPAE + tlb_add_flush(tlb, addr); + tlb_remove_page(tlb, virt_to_page(pmdp)); +#endif +} + #define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr) -#define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp) +#define pmd_free_tlb(tlb, pmdp, addr) __pmd_free_tlb(tlb, pmdp, addr) +#define pud_free_tlb(tlb, pudp, addr) pud_free((tlb)->mm, pudp) #define tlb_migrate_finish(mm) do { } while (0) diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h index 48192ac3a23a..28beab917ffc 100644 --- a/arch/arm/include/asm/types.h +++ b/arch/arm/include/asm/types.h @@ -3,12 +3,6 @@ #include <asm-generic/int-ll64.h> -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - /* * These aren't exported outside the kernel to avoid name space clashes */ diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h index a5edf421005c..d1c3f3a71c94 100644 --- a/arch/arm/include/asm/unwind.h +++ b/arch/arm/include/asm/unwind.h @@ -30,14 +30,15 @@ enum unwind_reason_code { }; struct unwind_idx { - unsigned long addr; + unsigned long addr_offset; unsigned long insn; }; struct unwind_table { struct list_head list; - struct unwind_idx *start; - struct unwind_idx *stop; + const struct unwind_idx *start; + const struct unwind_idx *origin; + const struct unwind_idx *stop; unsigned long begin_addr; unsigned long end_addr; }; @@ -49,15 +50,6 @@ extern struct unwind_table *unwind_table_add(unsigned long start, extern void unwind_table_del(struct unwind_table *tab); extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk); -#ifdef CONFIG_ARM_UNWIND -extern int __init unwind_init(void); -#else -static inline int __init unwind_init(void) -{ - return 0; -} -#endif - #endif /* !__ASSEMBLY__ */ #ifdef CONFIG_ARM_UNWIND diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 16eed6aebfa4..43b740d0e374 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -13,7 +13,7 @@ CFLAGS_REMOVE_return_address.o = -pg # Object file lists. -obj-y := elf.o entry-armv.o entry-common.o irq.o \ +obj-y := elf.o entry-armv.o entry-common.o irq.o opcodes.o \ process.o ptrace.o return_address.o setup.o signal.o \ sys_arm.o stacktrace.o time.o traps.o diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index b530e9116a0c..f58ba3589908 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -316,21 +316,6 @@ pdev_fixup_device_resources(struct pci_sys_data *root, struct pci_dev *dev) } } -static void __devinit -pbus_assign_bus_resources(struct pci_bus *bus, struct pci_sys_data *root) -{ - struct pci_dev *dev = bus->self; - int i; - - if (!dev) { - /* - * Assign root bus resources. - */ - for (i = 0; i < 3; i++) - bus->resource[i] = root->resource[i]; - } -} - /* * pcibios_fixup_bus - Called after each bus is probed, * but before its children are examined. @@ -341,8 +326,6 @@ void pcibios_fixup_bus(struct pci_bus *bus) struct pci_dev *dev; u16 features = PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_FAST_BACK; - pbus_assign_bus_resources(bus, root); - /* * Walk the devices on this bus, working out what we can * and can't support. @@ -508,12 +491,18 @@ static void __init pcibios_init_hw(struct hw_pci *hw) sys->busnr = busnr; sys->swizzle = hw->swizzle; sys->map_irq = hw->map_irq; - sys->resource[0] = &ioport_resource; - sys->resource[1] = &iomem_resource; + INIT_LIST_HEAD(&sys->resources); ret = hw->setup(nr, sys); if (ret > 0) { + if (list_empty(&sys->resources)) { + pci_add_resource(&sys->resources, + &ioport_resource); + pci_add_resource(&sys->resources, + &iomem_resource); + } + sys->bus = hw->scan(nr, sys); if (!sys->bus) @@ -571,6 +560,13 @@ void __init pci_common_init(struct hw_pci *hw) } } +#ifndef CONFIG_PCI_HOST_ITE8152 +void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} +#endif + char * __init pcibios_setup(char *str) { if (!strcmp(str, "debug")) { diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index b145f16c91bc..3a456c6c7005 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -36,12 +36,11 @@ #ifdef CONFIG_MULTI_IRQ_HANDLER ldr r1, =handle_arch_irq mov r0, sp - ldr r1, [r1] adr lr, BSYM(9997f) - teq r1, #0 - movne pc, r1 -#endif + ldr pc, [r1] +#else arch_irq_handler_default +#endif 9997: .endm diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 08c82fd844a8..14e277d2ff91 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -39,8 +39,14 @@ #error KERNEL_RAM_VADDR must start at 0xXXXX8000 #endif +#ifdef CONFIG_ARM_LPAE + /* LPAE requires an additional page for the PGD */ +#define PG_DIR_SIZE 0x5000 +#define PMD_ORDER 3 +#else #define PG_DIR_SIZE 0x4000 #define PMD_ORDER 2 +#endif .globl swapper_pg_dir .equ swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE @@ -164,17 +170,36 @@ __create_page_tables: teq r0, r6 bne 1b +#ifdef CONFIG_ARM_LPAE + /* + * Build the PGD table (first level) to point to the PMD table. A PGD + * entry is 64-bit wide. + */ + mov r0, r4 + add r3, r4, #0x1000 @ first PMD table address + orr r3, r3, #3 @ PGD block type + mov r6, #4 @ PTRS_PER_PGD + mov r7, #1 << (55 - 32) @ L_PGD_SWAPPER +1: str r3, [r0], #4 @ set bottom PGD entry bits + str r7, [r0], #4 @ set top PGD entry bits + add r3, r3, #0x1000 @ next PMD table + subs r6, r6, #1 + bne 1b + + add r4, r4, #0x1000 @ point to the PMD tables +#endif + ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags /* * Create identity mapping to cater for __enable_mmu. * This identity mapping will be removed by paging_init(). */ - adr r0, __enable_mmu_loc + adr r0, __turn_mmu_on_loc ldmia r0, {r3, r5, r6} sub r0, r0, r3 @ virt->phys offset - add r5, r5, r0 @ phys __enable_mmu - add r6, r6, r0 @ phys __enable_mmu_end + add r5, r5, r0 @ phys __turn_mmu_on + add r6, r6, r0 @ phys __turn_mmu_on_end mov r5, r5, lsr #SECTION_SHIFT mov r6, r6, lsr #SECTION_SHIFT @@ -219,8 +244,8 @@ __create_page_tables: #endif /* - * Then map boot params address in r2 or - * the first 1MB of ram if boot params address is not specified. + * Then map boot params address in r2 or the first 1MB (2MB with LPAE) + * of ram if boot params address is not specified. */ mov r0, r2, lsr #SECTION_SHIFT movs r0, r0, lsl #SECTION_SHIFT @@ -251,7 +276,15 @@ __create_page_tables: mov r3, r7, lsr #SECTION_SHIFT ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags orr r3, r7, r3, lsl #SECTION_SHIFT +#ifdef CONFIG_ARM_LPAE + mov r7, #1 << (54 - 32) @ XN +#else + orr r3, r3, #PMD_SECT_XN +#endif 1: str r3, [r0], #4 +#ifdef CONFIG_ARM_LPAE + str r7, [r0], #4 +#endif add r3, r3, #1 << SECTION_SHIFT cmp r0, r6 blo 1b @@ -283,14 +316,17 @@ __create_page_tables: str r3, [r0] #endif #endif +#ifdef CONFIG_ARM_LPAE + sub r4, r4, #0x1000 @ point to the PGD table +#endif mov pc, lr ENDPROC(__create_page_tables) .ltorg .align -__enable_mmu_loc: +__turn_mmu_on_loc: .long . - .long __enable_mmu - .long __enable_mmu_end + .long __turn_mmu_on + .long __turn_mmu_on_end #if defined(CONFIG_SMP) __CPUINIT @@ -374,12 +410,17 @@ __enable_mmu: #ifdef CONFIG_CPU_ICACHE_DISABLE bic r0, r0, #CR_I #endif +#ifdef CONFIG_ARM_LPAE + mov r5, #0 + mcrr p15, 0, r4, r5, c2 @ load TTBR0 +#else mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \ domain_val(DOMAIN_IO, DOMAIN_CLIENT)) mcr p15, 0, r5, c3, c0, 0 @ load domain access register mcr p15, 0, r4, c2, c0, 0 @ load page table pointer +#endif b __turn_mmu_on ENDPROC(__enable_mmu) @@ -398,15 +439,19 @@ ENDPROC(__enable_mmu) * other registers depend on the function called upon completion */ .align 5 -__turn_mmu_on: + .pushsection .idmap.text, "ax" +ENTRY(__turn_mmu_on) mov r0, r0 + instr_sync mcr p15, 0, r0, c1, c0, 0 @ write control reg mrc p15, 0, r3, c0, c0, 0 @ read id reg + instr_sync mov r3, r3 mov r3, r13 mov pc, r3 -__enable_mmu_end: +__turn_mmu_on_end: ENDPROC(__turn_mmu_on) + .popsection #ifdef CONFIG_SMP_ON_UP diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 814a52a9dc39..d6a95ef9131d 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -1016,10 +1016,10 @@ static int __init arch_hw_breakpoint_init(void) } /* Register debug fault handler. */ - hook_fault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT, - "watchpoint debug exception"); - hook_ifault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT, - "breakpoint debug exception"); + hook_fault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP, + TRAP_HWBKPT, "watchpoint debug exception"); + hook_ifault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP, + TRAP_HWBKPT, "breakpoint debug exception"); /* Register hotplug notifier. */ register_cpu_notifier(&dbg_reset_nb); diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c index e17cdd6d90d8..1862d8f2fd44 100644 --- a/arch/arm/kernel/kprobes-test.c +++ b/arch/arm/kernel/kprobes-test.c @@ -202,6 +202,8 @@ #include <linux/slab.h> #include <linux/kprobes.h> +#include <asm/opcodes.h> + #include "kprobes.h" #include "kprobes-test.h" @@ -1050,65 +1052,9 @@ static int test_instance; static unsigned long test_check_cc(int cc, unsigned long cpsr) { - unsigned long temp; - - switch (cc) { - case 0x0: /* eq */ - return cpsr & PSR_Z_BIT; - - case 0x1: /* ne */ - return (~cpsr) & PSR_Z_BIT; - - case 0x2: /* cs */ - return cpsr & PSR_C_BIT; - - case 0x3: /* cc */ - return (~cpsr) & PSR_C_BIT; - - case 0x4: /* mi */ - return cpsr & PSR_N_BIT; - - case 0x5: /* pl */ - return (~cpsr) & PSR_N_BIT; - - case 0x6: /* vs */ - return cpsr & PSR_V_BIT; - - case 0x7: /* vc */ - return (~cpsr) & PSR_V_BIT; + int ret = arm_check_condition(cc << 28, cpsr); - case 0x8: /* hi */ - cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */ - return cpsr & PSR_C_BIT; - - case 0x9: /* ls */ - cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */ - return (~cpsr) & PSR_C_BIT; - - case 0xa: /* ge */ - cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ - return (~cpsr) & PSR_N_BIT; - - case 0xb: /* lt */ - cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ - return cpsr & PSR_N_BIT; - - case 0xc: /* gt */ - temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ - temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */ - return (~temp) & PSR_N_BIT; - - case 0xd: /* le */ - temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ - temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */ - return temp & PSR_N_BIT; - - case 0xe: /* al */ - case 0xf: /* unconditional */ - return true; - } - BUG(); - return false; + return (ret != ARM_OPCODE_CONDTEST_FAIL); } static int is_last_scenario; @@ -1128,7 +1074,9 @@ static unsigned long test_context_cpsr(int scenario) if (!test_case_is_thumb) { /* Testing ARM code */ - probe_should_run = test_check_cc(current_instruction >> 28, cpsr) != 0; + int cc = current_instruction >> 28; + + probe_should_run = test_check_cc(cc, cpsr) != 0; if (scenario == 15) is_last_scenario = true; diff --git a/arch/arm/kernel/leds.c b/arch/arm/kernel/leds.c index 0bcd38341573..1911dae19e4f 100644 --- a/arch/arm/kernel/leds.c +++ b/arch/arm/kernel/leds.c @@ -9,7 +9,7 @@ */ #include <linux/export.h> #include <linux/init.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/string.h> @@ -34,8 +34,8 @@ static const struct leds_evt_name evt_names[] = { { "red", led_red_on, led_red_off }, }; -static ssize_t leds_store(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t leds_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) { int ret = -EINVAL, len = strcspn(buf, " "); @@ -69,15 +69,16 @@ static ssize_t leds_store(struct sys_device *dev, return ret; } -static SYSDEV_ATTR(event, 0200, NULL, leds_store); +static DEVICE_ATTR(event, 0200, NULL, leds_store); -static struct sysdev_class leds_sysclass = { +static struct bus_type leds_subsys = { .name = "leds", + .dev_name = "leds", }; -static struct sys_device leds_device = { +static struct device leds_device = { .id = 0, - .cls = &leds_sysclass, + .bus = &leds_subsys, }; static int leds_suspend(void) @@ -105,11 +106,11 @@ static struct syscore_ops leds_syscore_ops = { static int __init leds_init(void) { int ret; - ret = sysdev_class_register(&leds_sysclass); + ret = subsys_system_register(&leds_subsys, NULL); if (ret == 0) - ret = sysdev_register(&leds_device); + ret = device_register(&leds_device); if (ret == 0) - ret = sysdev_create_file(&leds_device, &attr_event); + ret = device_create_file(&leds_device, &dev_attr_event); if (ret == 0) register_syscore_ops(&leds_syscore_ops); return ret; diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index e59bbd496c39..764bd456d84f 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -12,12 +12,11 @@ #include <asm/mmu_context.h> #include <asm/cacheflush.h> #include <asm/mach-types.h> +#include <asm/system.h> extern const unsigned char relocate_new_kernel[]; extern const unsigned int relocate_new_kernel_size; -extern void setup_mm_for_reboot(char mode); - extern unsigned long kexec_start_address; extern unsigned long kexec_indirection_page; extern unsigned long kexec_mach_type; @@ -111,14 +110,6 @@ void machine_kexec(struct kimage *image) if (kexec_reinit) kexec_reinit(); - local_irq_disable(); - local_fiq_disable(); - setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/ - flush_cache_all(); - outer_flush_all(); - outer_disable(); - cpu_proc_fin(); - outer_inv_all(); - flush_cache_all(); - cpu_reset(reboot_code_buffer_phys); + + soft_restart(reboot_code_buffer_phys); } diff --git a/arch/arm/kernel/opcodes.c b/arch/arm/kernel/opcodes.c new file mode 100644 index 000000000000..f8179c6a817f --- /dev/null +++ b/arch/arm/kernel/opcodes.c @@ -0,0 +1,72 @@ +/* + * linux/arch/arm/kernel/opcodes.c + * + * A32 condition code lookup feature moved from nwfpe/fpopcode.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <asm/opcodes.h> + +#define ARM_OPCODE_CONDITION_UNCOND 0xf + +/* + * condition code lookup table + * index into the table is test code: EQ, NE, ... LT, GT, AL, NV + * + * bit position in short is condition code: NZCV + */ +static const unsigned short cc_map[16] = { + 0xF0F0, /* EQ == Z set */ + 0x0F0F, /* NE */ + 0xCCCC, /* CS == C set */ + 0x3333, /* CC */ + 0xFF00, /* MI == N set */ + 0x00FF, /* PL */ + 0xAAAA, /* VS == V set */ + 0x5555, /* VC */ + 0x0C0C, /* HI == C set && Z clear */ + 0xF3F3, /* LS == C clear || Z set */ + 0xAA55, /* GE == (N==V) */ + 0x55AA, /* LT == (N!=V) */ + 0x0A05, /* GT == (!Z && (N==V)) */ + 0xF5FA, /* LE == (Z || (N!=V)) */ + 0xFFFF, /* AL always */ + 0 /* NV */ +}; + +/* + * Returns: + * ARM_OPCODE_CONDTEST_FAIL - if condition fails + * ARM_OPCODE_CONDTEST_PASS - if condition passes (including AL) + * ARM_OPCODE_CONDTEST_UNCOND - if NV condition, or separate unconditional + * opcode space from v5 onwards + * + * Code that tests whether a conditional instruction would pass its condition + * check should check that return value == ARM_OPCODE_CONDTEST_PASS. + * + * Code that tests if a condition means that the instruction would be executed + * (regardless of conditional or unconditional) should instead check that the + * return value != ARM_OPCODE_CONDTEST_FAIL. + */ +asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr) +{ + u32 cc_bits = opcode >> 28; + u32 psr_cond = psr >> 28; + unsigned int ret; + + if (cc_bits != ARM_OPCODE_CONDITION_UNCOND) { + if ((cc_map[cc_bits] >> (psr_cond)) & 1) + ret = ARM_OPCODE_CONDTEST_PASS; + else + ret = ARM_OPCODE_CONDTEST_FAIL; + } else { + ret = ARM_OPCODE_CONDTEST_UNCOND; + } + + return ret; +} +EXPORT_SYMBOL_GPL(arm_check_condition); diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index c475379199b1..5bb91bf3d47f 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -59,8 +59,7 @@ armpmu_get_pmu_id(void) } EXPORT_SYMBOL_GPL(armpmu_get_pmu_id); -int -armpmu_get_max_events(void) +int perf_num_counters(void) { int max_events = 0; @@ -69,12 +68,6 @@ armpmu_get_max_events(void) return max_events; } -EXPORT_SYMBOL_GPL(armpmu_get_max_events); - -int perf_num_counters(void) -{ - return armpmu_get_max_events(); -} EXPORT_SYMBOL_GPL(perf_num_counters); #define HW_OP_UNSUPPORTED 0xFFFF @@ -353,15 +346,15 @@ validate_group(struct perf_event *event) fake_pmu.used_mask = fake_used_mask; if (!validate_event(&fake_pmu, leader)) - return -ENOSPC; + return -EINVAL; list_for_each_entry(sibling, &leader->sibling_list, group_entry) { if (!validate_event(&fake_pmu, sibling)) - return -ENOSPC; + return -EINVAL; } if (!validate_event(&fake_pmu, event)) - return -ENOSPC; + return -EINVAL; return 0; } @@ -380,6 +373,8 @@ armpmu_release_hardware(struct arm_pmu *armpmu) { int i, irq, irqs; struct platform_device *pmu_device = armpmu->plat_device; + struct arm_pmu_platdata *plat = + dev_get_platdata(&pmu_device->dev); irqs = min(pmu_device->num_resources, num_possible_cpus()); @@ -387,8 +382,11 @@ armpmu_release_hardware(struct arm_pmu *armpmu) if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs)) continue; irq = platform_get_irq(pmu_device, i); - if (irq >= 0) + if (irq >= 0) { + if (plat && plat->disable_irq) + plat->disable_irq(irq); free_irq(irq, armpmu); + } } release_pmu(armpmu->type); @@ -448,7 +446,8 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu) irq); armpmu_release_hardware(armpmu); return err; - } + } else if (plat && plat->enable_irq) + plat->enable_irq(irq); cpumask_set_cpu(i, &armpmu->active_irqs); } @@ -640,6 +639,9 @@ static struct platform_device_id armpmu_plat_device_ids[] = { static int __devinit armpmu_device_probe(struct platform_device *pdev) { + if (!cpu_pmu) + return -ENODEV; + cpu_pmu->plat_device = pdev; return 0; } diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index e63d8115c01b..533be9930ec2 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -65,13 +65,15 @@ enum armv6_counters { * accesses/misses in hardware. */ static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC, + [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT, + [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6_PERFCTR_IBUF_STALL, + [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV6_PERFCTR_LSU_FULL_STALL, }; static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] @@ -218,13 +220,15 @@ enum armv6mpcore_perf_types { * accesses/misses in hardware. */ static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC, + [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT, + [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6MPCORE_PERFCTR_IBUF_STALL, + [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV6MPCORE_PERFCTR_LSU_FULL_STALL, }; static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 1ef6d0034b85..460bbbb6b885 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -28,165 +28,87 @@ static struct arm_pmu armv7pmu; * they are not available. */ enum armv7_perf_types { - ARMV7_PERFCTR_PMNC_SW_INCR = 0x00, - ARMV7_PERFCTR_IFETCH_MISS = 0x01, - ARMV7_PERFCTR_ITLB_MISS = 0x02, - ARMV7_PERFCTR_DCACHE_REFILL = 0x03, /* L1 */ - ARMV7_PERFCTR_DCACHE_ACCESS = 0x04, /* L1 */ - ARMV7_PERFCTR_DTLB_REFILL = 0x05, - ARMV7_PERFCTR_DREAD = 0x06, - ARMV7_PERFCTR_DWRITE = 0x07, - ARMV7_PERFCTR_INSTR_EXECUTED = 0x08, - ARMV7_PERFCTR_EXC_TAKEN = 0x09, - ARMV7_PERFCTR_EXC_EXECUTED = 0x0A, - ARMV7_PERFCTR_CID_WRITE = 0x0B, - /* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS. + ARMV7_PERFCTR_PMNC_SW_INCR = 0x00, + ARMV7_PERFCTR_L1_ICACHE_REFILL = 0x01, + ARMV7_PERFCTR_ITLB_REFILL = 0x02, + ARMV7_PERFCTR_L1_DCACHE_REFILL = 0x03, + ARMV7_PERFCTR_L1_DCACHE_ACCESS = 0x04, + ARMV7_PERFCTR_DTLB_REFILL = 0x05, + ARMV7_PERFCTR_MEM_READ = 0x06, + ARMV7_PERFCTR_MEM_WRITE = 0x07, + ARMV7_PERFCTR_INSTR_EXECUTED = 0x08, + ARMV7_PERFCTR_EXC_TAKEN = 0x09, + ARMV7_PERFCTR_EXC_EXECUTED = 0x0A, + ARMV7_PERFCTR_CID_WRITE = 0x0B, + + /* + * ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS. * It counts: - * - all branch instructions, + * - all (taken) branch instructions, * - instructions that explicitly write the PC, * - exception generating instructions. */ - ARMV7_PERFCTR_PC_WRITE = 0x0C, - ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D, - ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E, - ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F, + ARMV7_PERFCTR_PC_WRITE = 0x0C, + ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D, + ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E, + ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS = 0x0F, + ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10, + ARMV7_PERFCTR_CLOCK_CYCLES = 0x11, + ARMV7_PERFCTR_PC_BRANCH_PRED = 0x12, /* These events are defined by the PMUv2 supplement (ARM DDI 0457A). */ - ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10, - ARMV7_PERFCTR_CLOCK_CYCLES = 0x11, - ARMV7_PERFCTR_PC_BRANCH_PRED = 0x12, - ARMV7_PERFCTR_MEM_ACCESS = 0x13, - ARMV7_PERFCTR_L1_ICACHE_ACCESS = 0x14, - ARMV7_PERFCTR_L1_DCACHE_WB = 0x15, - ARMV7_PERFCTR_L2_DCACHE_ACCESS = 0x16, - ARMV7_PERFCTR_L2_DCACHE_REFILL = 0x17, - ARMV7_PERFCTR_L2_DCACHE_WB = 0x18, - ARMV7_PERFCTR_BUS_ACCESS = 0x19, - ARMV7_PERFCTR_MEMORY_ERROR = 0x1A, - ARMV7_PERFCTR_INSTR_SPEC = 0x1B, - ARMV7_PERFCTR_TTBR_WRITE = 0x1C, - ARMV7_PERFCTR_BUS_CYCLES = 0x1D, - - ARMV7_PERFCTR_CPU_CYCLES = 0xFF + ARMV7_PERFCTR_MEM_ACCESS = 0x13, + ARMV7_PERFCTR_L1_ICACHE_ACCESS = 0x14, + ARMV7_PERFCTR_L1_DCACHE_WB = 0x15, + ARMV7_PERFCTR_L2_CACHE_ACCESS = 0x16, + ARMV7_PERFCTR_L2_CACHE_REFILL = 0x17, + ARMV7_PERFCTR_L2_CACHE_WB = 0x18, + ARMV7_PERFCTR_BUS_ACCESS = 0x19, + ARMV7_PERFCTR_MEM_ERROR = 0x1A, + ARMV7_PERFCTR_INSTR_SPEC = 0x1B, + ARMV7_PERFCTR_TTBR_WRITE = 0x1C, + ARMV7_PERFCTR_BUS_CYCLES = 0x1D, + + ARMV7_PERFCTR_CPU_CYCLES = 0xFF }; /* ARMv7 Cortex-A8 specific event types */ enum armv7_a8_perf_types { - ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40, - ARMV7_PERFCTR_L2_STORE_MERGED = 0x41, - ARMV7_PERFCTR_L2_STORE_BUFF = 0x42, - ARMV7_PERFCTR_L2_ACCESS = 0x43, - ARMV7_PERFCTR_L2_CACH_MISS = 0x44, - ARMV7_PERFCTR_AXI_READ_CYCLES = 0x45, - ARMV7_PERFCTR_AXI_WRITE_CYCLES = 0x46, - ARMV7_PERFCTR_MEMORY_REPLAY = 0x47, - ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY = 0x48, - ARMV7_PERFCTR_L1_DATA_MISS = 0x49, - ARMV7_PERFCTR_L1_INST_MISS = 0x4A, - ARMV7_PERFCTR_L1_DATA_COLORING = 0x4B, - ARMV7_PERFCTR_L1_NEON_DATA = 0x4C, - ARMV7_PERFCTR_L1_NEON_CACH_DATA = 0x4D, - ARMV7_PERFCTR_L2_NEON = 0x4E, - ARMV7_PERFCTR_L2_NEON_HIT = 0x4F, - ARMV7_PERFCTR_L1_INST = 0x50, - ARMV7_PERFCTR_PC_RETURN_MIS_PRED = 0x51, - ARMV7_PERFCTR_PC_BRANCH_FAILED = 0x52, - ARMV7_PERFCTR_PC_BRANCH_TAKEN = 0x53, - ARMV7_PERFCTR_PC_BRANCH_EXECUTED = 0x54, - ARMV7_PERFCTR_OP_EXECUTED = 0x55, - ARMV7_PERFCTR_CYCLES_INST_STALL = 0x56, - ARMV7_PERFCTR_CYCLES_INST = 0x57, - ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL = 0x58, - ARMV7_PERFCTR_CYCLES_NEON_INST_STALL = 0x59, - ARMV7_PERFCTR_NEON_CYCLES = 0x5A, - - ARMV7_PERFCTR_PMU0_EVENTS = 0x70, - ARMV7_PERFCTR_PMU1_EVENTS = 0x71, - ARMV7_PERFCTR_PMU_EVENTS = 0x72, + ARMV7_A8_PERFCTR_L2_CACHE_ACCESS = 0x43, + ARMV7_A8_PERFCTR_L2_CACHE_REFILL = 0x44, + ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS = 0x50, + ARMV7_A8_PERFCTR_STALL_ISIDE = 0x56, }; /* ARMv7 Cortex-A9 specific event types */ enum armv7_a9_perf_types { - ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC = 0x40, - ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC = 0x41, - ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC = 0x42, - - ARMV7_PERFCTR_COHERENT_LINE_MISS = 0x50, - ARMV7_PERFCTR_COHERENT_LINE_HIT = 0x51, - - ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES = 0x60, - ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES = 0x61, - ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62, - ARMV7_PERFCTR_STREX_EXECUTED_PASSED = 0x63, - ARMV7_PERFCTR_STREX_EXECUTED_FAILED = 0x64, - ARMV7_PERFCTR_DATA_EVICTION = 0x65, - ARMV7_PERFCTR_ISSUE_STAGE_NO_INST = 0x66, - ARMV7_PERFCTR_ISSUE_STAGE_EMPTY = 0x67, - ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE = 0x68, - - ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E, - - ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST = 0x70, - ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71, - ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST = 0x72, - ARMV7_PERFCTR_FP_EXECUTED_INST = 0x73, - ARMV7_PERFCTR_NEON_EXECUTED_INST = 0x74, - - ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80, - ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES = 0x81, - ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES = 0x82, - ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES = 0x83, - ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES = 0x84, - ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES = 0x85, - ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES = 0x86, - - ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES = 0x8A, - ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B, - - ARMV7_PERFCTR_ISB_INST = 0x90, - ARMV7_PERFCTR_DSB_INST = 0x91, - ARMV7_PERFCTR_DMB_INST = 0x92, - ARMV7_PERFCTR_EXT_INTERRUPTS = 0x93, - - ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED = 0xA0, - ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED = 0xA1, - ARMV7_PERFCTR_PLE_FIFO_FLUSH = 0xA2, - ARMV7_PERFCTR_PLE_RQST_COMPLETED = 0xA3, - ARMV7_PERFCTR_PLE_FIFO_OVERFLOW = 0xA4, - ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5 + ARMV7_A9_PERFCTR_INSTR_CORE_RENAME = 0x68, + ARMV7_A9_PERFCTR_STALL_ICACHE = 0x60, + ARMV7_A9_PERFCTR_STALL_DISPATCH = 0x66, }; /* ARMv7 Cortex-A5 specific event types */ enum armv7_a5_perf_types { - ARMV7_PERFCTR_IRQ_TAKEN = 0x86, - ARMV7_PERFCTR_FIQ_TAKEN = 0x87, - - ARMV7_PERFCTR_EXT_MEM_RQST = 0xc0, - ARMV7_PERFCTR_NC_EXT_MEM_RQST = 0xc1, - ARMV7_PERFCTR_PREFETCH_LINEFILL = 0xc2, - ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP = 0xc3, - ARMV7_PERFCTR_ENTER_READ_ALLOC = 0xc4, - ARMV7_PERFCTR_READ_ALLOC = 0xc5, - - ARMV7_PERFCTR_STALL_SB_FULL = 0xc9, + ARMV7_A5_PERFCTR_PREFETCH_LINEFILL = 0xc2, + ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP = 0xc3, }; /* ARMv7 Cortex-A15 specific event types */ enum armv7_a15_perf_types { - ARMV7_PERFCTR_L1_DCACHE_READ_ACCESS = 0x40, - ARMV7_PERFCTR_L1_DCACHE_WRITE_ACCESS = 0x41, - ARMV7_PERFCTR_L1_DCACHE_READ_REFILL = 0x42, - ARMV7_PERFCTR_L1_DCACHE_WRITE_REFILL = 0x43, + ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ = 0x40, + ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE = 0x41, + ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ = 0x42, + ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE = 0x43, - ARMV7_PERFCTR_L1_DTLB_READ_REFILL = 0x4C, - ARMV7_PERFCTR_L1_DTLB_WRITE_REFILL = 0x4D, + ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ = 0x4C, + ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE = 0x4D, - ARMV7_PERFCTR_L2_DCACHE_READ_ACCESS = 0x50, - ARMV7_PERFCTR_L2_DCACHE_WRITE_ACCESS = 0x51, - ARMV7_PERFCTR_L2_DCACHE_READ_REFILL = 0x52, - ARMV7_PERFCTR_L2_DCACHE_WRITE_REFILL = 0x53, + ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ = 0x50, + ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE = 0x51, + ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ = 0x52, + ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE = 0x53, - ARMV7_PERFCTR_SPEC_PC_WRITE = 0x76, + ARMV7_A15_PERFCTR_PC_WRITE_SPEC = 0x76, }; /* @@ -197,13 +119,15 @@ enum armv7_a15_perf_types { * accesses/misses in hardware. */ static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, + [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, + [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV7_A8_PERFCTR_STALL_ISIDE, + [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED, }; static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] @@ -217,12 +141,12 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] * combined. */ [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, }, [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -231,12 +155,12 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] }, [C(L1I)] = { [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS, + [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, }, [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS, + [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -245,12 +169,12 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] }, [C(LL)] = { [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS, + [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L2_CACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_A8_PERFCTR_L2_CACHE_REFILL, }, [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS, + [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L2_CACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_A8_PERFCTR_L2_CACHE_REFILL, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -274,11 +198,11 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(ITLB)] = { [C(OP_READ)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, }, [C(OP_WRITE)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -287,14 +211,12 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] }, [C(BPU)] = { [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }, [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -321,14 +243,15 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] * Cortex-A9 HW events mapping */ static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = - ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE, - [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_DCACHE_ACCESS, - [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_DCACHE_REFILL, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, + [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_A9_PERFCTR_INSTR_CORE_RENAME, + [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV7_A9_PERFCTR_STALL_ICACHE, + [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV7_A9_PERFCTR_STALL_DISPATCH, }; static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] @@ -342,12 +265,12 @@ static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] * combined. */ [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, }, [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -357,11 +280,11 @@ static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(L1I)] = { [C(OP_READ)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, }, [C(OP_WRITE)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -399,11 +322,11 @@ static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(ITLB)] = { [C(OP_READ)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, }, [C(OP_WRITE)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -412,14 +335,12 @@ static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] }, [C(BPU)] = { [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }, [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -446,13 +367,15 @@ static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] * Cortex-A5 HW events mapping */ static const unsigned armv7_a5_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, + [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED, }; static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] @@ -460,42 +383,34 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { [C(L1D)] = { [C(OP_READ)] = { - [C(RESULT_ACCESS)] - = ARMV7_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_DCACHE_REFILL, + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, }, [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] - = ARMV7_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_DCACHE_REFILL, + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, }, [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] - = ARMV7_PERFCTR_PREFETCH_LINEFILL, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP, + [C(RESULT_ACCESS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL, + [C(RESULT_MISS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP, }, }, [C(L1I)] = { [C(OP_READ)] = { [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, }, [C(OP_WRITE)] = { [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, }, /* * The prefetch counters don't differentiate between the I * side and the D side. */ [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] - = ARMV7_PERFCTR_PREFETCH_LINEFILL, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP, + [C(RESULT_ACCESS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL, + [C(RESULT_MISS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP, }, }, [C(LL)] = { @@ -529,11 +444,11 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(ITLB)] = { [C(OP_READ)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, }, [C(OP_WRITE)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -543,13 +458,11 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(BPU)] = { [C(OP_READ)] = { [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }, [C(OP_WRITE)] = { [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -562,13 +475,15 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] * Cortex-A15 HW events mapping */ static const unsigned armv7_a15_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_SPEC_PC_WRITE, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES, + [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, + [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_A15_PERFCTR_PC_WRITE_SPEC, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES, + [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED, }; static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] @@ -576,16 +491,12 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { [C(L1D)] = { [C(OP_READ)] = { - [C(RESULT_ACCESS)] - = ARMV7_PERFCTR_L1_DCACHE_READ_ACCESS, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_L1_DCACHE_READ_REFILL, + [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ, + [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ, }, [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] - = ARMV7_PERFCTR_L1_DCACHE_WRITE_ACCESS, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_L1_DCACHE_WRITE_REFILL, + [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE, + [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -601,11 +512,11 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] */ [C(OP_READ)] = { [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, }, [C(OP_WRITE)] = { [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -614,16 +525,12 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] }, [C(LL)] = { [C(OP_READ)] = { - [C(RESULT_ACCESS)] - = ARMV7_PERFCTR_L2_DCACHE_READ_ACCESS, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_L2_DCACHE_READ_REFILL, + [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ, + [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ, }, [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] - = ARMV7_PERFCTR_L2_DCACHE_WRITE_ACCESS, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_L2_DCACHE_WRITE_REFILL, + [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE, + [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -633,13 +540,11 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(DTLB)] = { [C(OP_READ)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_L1_DTLB_READ_REFILL, + [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ, }, [C(OP_WRITE)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_L1_DTLB_WRITE_REFILL, + [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -649,11 +554,11 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(ITLB)] = { [C(OP_READ)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, }, [C(OP_WRITE)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -663,13 +568,11 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(BPU)] = { [C(OP_READ)] = { [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }, [C(OP_WRITE)] = { [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index e0cca10a8411..3b99d8269829 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -48,13 +48,15 @@ enum xscale_counters { }; static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT, - [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH, - [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT, + [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION, + [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH, + [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS, + [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = XSCALE_PERFCTR_ICACHE_NO_DELIVER, + [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED, }; static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 3d0c6fb74ae4..971d65c253a9 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -57,7 +57,7 @@ static const char *isa_modes[] = { "ARM" , "Thumb" , "Jazelle", "ThumbEE" }; -extern void setup_mm_for_reboot(char mode); +extern void setup_mm_for_reboot(void); static volatile int hlt_counter; @@ -92,18 +92,24 @@ static int __init hlt_setup(char *__unused) __setup("nohlt", nohlt_setup); __setup("hlt", hlt_setup); -void arm_machine_restart(char mode, const char *cmd) +extern void call_with_stack(void (*fn)(void *), void *arg, void *sp); +typedef void (*phys_reset_t)(unsigned long); + +/* + * A temporary stack to use for CPU reset. This is static so that we + * don't clobber it with the identity mapping. When running with this + * stack, any references to the current task *will not work* so you + * should really do as little as possible before jumping to your reset + * code. + */ +static u64 soft_restart_stack[16]; + +static void __soft_restart(void *addr) { - /* Disable interrupts first */ - local_irq_disable(); - local_fiq_disable(); + phys_reset_t phys_reset; - /* - * Tell the mm system that we are going to reboot - - * we may need it to insert some 1:1 mappings so that - * soft boot works. - */ - setup_mm_for_reboot(mode); + /* Take out a flat memory mapping. */ + setup_mm_for_reboot(); /* Clean and invalidate caches */ flush_cache_all(); @@ -114,18 +120,35 @@ void arm_machine_restart(char mode, const char *cmd) /* Push out any further dirty data, and ensure cache is empty */ flush_cache_all(); - /* - * Now call the architecture specific reboot code. - */ - arch_reset(mode, cmd); + /* Switch to the identity mapping. */ + phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); + phys_reset((unsigned long)addr); - /* - * Whoops - the architecture was unable to reboot. - * Tell the user! - */ - mdelay(1000); - printk("Reboot failed -- System halted\n"); - while (1); + /* Should never get here. */ + BUG(); +} + +void soft_restart(unsigned long addr) +{ + u64 *stack = soft_restart_stack + ARRAY_SIZE(soft_restart_stack); + + /* Disable interrupts first */ + local_irq_disable(); + local_fiq_disable(); + + /* Disable the L2 if we're the last man standing. */ + if (num_online_cpus() == 1) + outer_disable(); + + /* Change to the new stack and continue with the reset. */ + call_with_stack(__soft_restart, (void *)addr, (void *)stack); + + /* Should never get here. */ + BUG(); +} + +static void null_restart(char mode, const char *cmd) +{ } /* @@ -134,7 +157,7 @@ void arm_machine_restart(char mode, const char *cmd) void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); -void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart; +void (*arm_pm_restart)(char str, const char *cmd) = null_restart; EXPORT_SYMBOL_GPL(arm_pm_restart); static void do_nothing(void *unused) @@ -183,7 +206,8 @@ void cpu_idle(void) /* endless idle loop with no priority at all */ while (1) { - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); + rcu_idle_enter(); leds_event(led_idle_start); while (!need_resched()) { #ifdef CONFIG_HOTPLUG_CPU @@ -213,7 +237,8 @@ void cpu_idle(void) } } leds_event(led_idle_end); - tick_nohz_restart_sched_tick(); + rcu_idle_exit(); + tick_nohz_idle_exit(); preempt_enable_no_resched(); schedule(); preempt_disable(); @@ -253,7 +278,15 @@ void machine_power_off(void) void machine_restart(char *cmd) { machine_shutdown(); + arm_pm_restart(reboot_mode, cmd); + + /* Give a grace period for failure to restart of 1s */ + mdelay(1000); + + /* Whoops - the platform was unable to reboot. Tell the user! */ + printk("Reboot failed -- System halted\n"); + while (1); } void __show_regs(struct pt_regs *regs) diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 9a46370fe9da..5416c7c12528 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -14,61 +14,153 @@ #include <asm/sched_clock.h> +struct clock_data { + u64 epoch_ns; + u32 epoch_cyc; + u32 epoch_cyc_copy; + u32 mult; + u32 shift; +}; + static void sched_clock_poll(unsigned long wrap_ticks); static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0); -static void (*sched_clock_update_fn)(void); + +static struct clock_data cd = { + .mult = NSEC_PER_SEC / HZ, +}; + +static u32 __read_mostly sched_clock_mask = 0xffffffff; + +static u32 notrace jiffy_sched_clock_read(void) +{ + return (u32)(jiffies - INITIAL_JIFFIES); +} + +static u32 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read; + +static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift) +{ + return (cyc * mult) >> shift; +} + +static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask) +{ + u64 epoch_ns; + u32 epoch_cyc; + + /* + * Load the epoch_cyc and epoch_ns atomically. We do this by + * ensuring that we always write epoch_cyc, epoch_ns and + * epoch_cyc_copy in strict order, and read them in strict order. + * If epoch_cyc and epoch_cyc_copy are not equal, then we're in + * the middle of an update, and we should repeat the load. + */ + do { + epoch_cyc = cd.epoch_cyc; + smp_rmb(); + epoch_ns = cd.epoch_ns; + smp_rmb(); + } while (epoch_cyc != cd.epoch_cyc_copy); + + return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, cd.mult, cd.shift); +} + +/* + * Atomically update the sched_clock epoch. + */ +static void notrace update_sched_clock(void) +{ + unsigned long flags; + u32 cyc; + u64 ns; + + cyc = read_sched_clock(); + ns = cd.epoch_ns + + cyc_to_ns((cyc - cd.epoch_cyc) & sched_clock_mask, + cd.mult, cd.shift); + /* + * Write epoch_cyc and epoch_ns in a way that the update is + * detectable in cyc_to_fixed_sched_clock(). + */ + raw_local_irq_save(flags); + cd.epoch_cyc = cyc; + smp_wmb(); + cd.epoch_ns = ns; + smp_wmb(); + cd.epoch_cyc_copy = cyc; + raw_local_irq_restore(flags); +} static void sched_clock_poll(unsigned long wrap_ticks) { mod_timer(&sched_clock_timer, round_jiffies(jiffies + wrap_ticks)); - sched_clock_update_fn(); + update_sched_clock(); } -void __init init_sched_clock(struct clock_data *cd, void (*update)(void), - unsigned int clock_bits, unsigned long rate) +void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) { unsigned long r, w; u64 res, wrap; char r_unit; - sched_clock_update_fn = update; + BUG_ON(bits > 32); + WARN_ON(!irqs_disabled()); + WARN_ON(read_sched_clock != jiffy_sched_clock_read); + read_sched_clock = read; + sched_clock_mask = (1 << bits) - 1; /* calculate the mult/shift to convert counter ticks to ns. */ - clocks_calc_mult_shift(&cd->mult, &cd->shift, rate, NSEC_PER_SEC, 0); + clocks_calc_mult_shift(&cd.mult, &cd.shift, rate, NSEC_PER_SEC, 0); r = rate; if (r >= 4000000) { r /= 1000000; r_unit = 'M'; - } else { + } else if (r >= 1000) { r /= 1000; r_unit = 'k'; - } + } else + r_unit = ' '; /* calculate how many ns until we wrap */ - wrap = cyc_to_ns((1ULL << clock_bits) - 1, cd->mult, cd->shift); + wrap = cyc_to_ns((1ULL << bits) - 1, cd.mult, cd.shift); do_div(wrap, NSEC_PER_MSEC); w = wrap; /* calculate the ns resolution of this counter */ - res = cyc_to_ns(1ULL, cd->mult, cd->shift); + res = cyc_to_ns(1ULL, cd.mult, cd.shift); pr_info("sched_clock: %u bits at %lu%cHz, resolution %lluns, wraps every %lums\n", - clock_bits, r, r_unit, res, w); + bits, r, r_unit, res, w); /* * Start the timer to keep sched_clock() properly updated and * sets the initial epoch. */ sched_clock_timer.data = msecs_to_jiffies(w - (w / 10)); - update(); + update_sched_clock(); /* * Ensure that sched_clock() starts off at 0ns */ - cd->epoch_ns = 0; + cd.epoch_ns = 0; + + pr_debug("Registered %pF as sched_clock source\n", read); +} + +unsigned long long notrace sched_clock(void) +{ + u32 cyc = read_sched_clock(); + return cyc_to_sched_clock(cyc, sched_clock_mask); } void __init sched_clock_postinit(void) { + /* + * If no sched_clock function has been provided at that point, + * make it the final one one. + */ + if (read_sched_clock == jiffy_sched_clock_read) + setup_sched_clock(jiffy_sched_clock_read, 32, HZ); + sched_clock_poll(sched_clock_timer.data); } diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 3448a3f9cc8c..129fbd55bde8 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -31,6 +31,7 @@ #include <linux/memblock.h> #include <linux/bug.h> #include <linux/compiler.h> +#include <linux/sort.h> #include <asm/unified.h> #include <asm/cpu.h> @@ -52,6 +53,7 @@ #include <asm/mach/time.h> #include <asm/traps.h> #include <asm/unwind.h> +#include <asm/memblock.h> #if defined(CONFIG_DEPRECATED_PARAM_STRUCT) #include "compat.h" @@ -890,13 +892,17 @@ static struct machine_desc * __init setup_machine_tags(unsigned int nr) return mdesc; } +static int __init meminfo_cmp(const void *_a, const void *_b) +{ + const struct membank *a = _a, *b = _b; + long cmp = bank_pfn_start(a) - bank_pfn_start(b); + return cmp < 0 ? -1 : cmp > 0 ? 1 : 0; +} void __init setup_arch(char **cmdline_p) { struct machine_desc *mdesc; - unwind_init(); - setup_processor(); mdesc = setup_machine_fdt(__atags_pointer); if (!mdesc) @@ -904,8 +910,14 @@ void __init setup_arch(char **cmdline_p) machine_desc = mdesc; machine_name = mdesc->name; - if (mdesc->soft_reboot) - reboot_setup("s"); +#ifdef CONFIG_ZONE_DMA + if (mdesc->dma_zone_size) { + extern unsigned long arm_dma_zone_size; + arm_dma_zone_size = mdesc->dma_zone_size; + } +#endif + if (mdesc->restart_mode) + reboot_setup(&mdesc->restart_mode); init_mm.start_code = (unsigned long) _text; init_mm.end_code = (unsigned long) _etext; @@ -918,12 +930,16 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); + sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL); sanity_check_meminfo(); arm_memblock_init(&meminfo, mdesc); paging_init(mdesc); request_standard_resources(mdesc); + if (mdesc->restart) + arm_pm_restart = mdesc->restart; + unflatten_device_tree(); #ifdef CONFIG_SMP @@ -934,12 +950,6 @@ void __init setup_arch(char **cmdline_p) tcm_init(); -#ifdef CONFIG_ZONE_DMA - if (mdesc->dma_zone_size) { - extern unsigned long arm_dma_zone_size; - arm_dma_zone_size = mdesc->dma_zone_size; - } -#endif #ifdef CONFIG_MULTI_IRQ_HANDLER handle_arch_irq = mdesc->handle_irq; #endif diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 020e99c845e7..1f268bda4552 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -54,14 +54,18 @@ ENDPROC(cpu_suspend_abort) * r0 = control register value */ .align 5 + .pushsection .idmap.text,"ax" ENTRY(cpu_resume_mmu) ldr r3, =cpu_resume_after_mmu + instr_sync mcr p15, 0, r0, c1, c0, 0 @ turn on MMU, I-cache, etc mrc p15, 0, r0, c0, c0, 0 @ read id reg + instr_sync mov r0, r0 mov r0, r0 mov pc, r3 @ jump to virtual address ENDPROC(cpu_resume_mmu) + .popsection cpu_resume_after_mmu: bl cpu_init @ restore the und/abt/irq banked regs mov r0, #0 @ return zero on success diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index ef5640b9e218..57db122a4f62 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -31,6 +31,7 @@ #include <asm/cpu.h> #include <asm/cputype.h> #include <asm/exception.h> +#include <asm/idmap.h> #include <asm/topology.h> #include <asm/mmu_context.h> #include <asm/pgtable.h> @@ -61,7 +62,6 @@ int __cpuinit __cpu_up(unsigned int cpu) { struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu); struct task_struct *idle = ci->idle; - pgd_t *pgd; int ret; /* @@ -84,29 +84,11 @@ int __cpuinit __cpu_up(unsigned int cpu) } /* - * Allocate initial page tables to allow the new CPU to - * enable the MMU safely. This essentially means a set - * of our "standard" page tables, with the addition of - * a 1:1 mapping for the physical address of the kernel. - */ - pgd = pgd_alloc(&init_mm); - if (!pgd) - return -ENOMEM; - - if (PHYS_OFFSET != PAGE_OFFSET) { -#ifndef CONFIG_HOTPLUG_CPU - identity_mapping_add(pgd, __pa(__init_begin), __pa(__init_end)); -#endif - identity_mapping_add(pgd, __pa(_stext), __pa(_etext)); - identity_mapping_add(pgd, __pa(_sdata), __pa(_edata)); - } - - /* * We need to tell the secondary core where to find * its stack and the page tables. */ secondary_data.stack = task_stack_page(idle) + THREAD_START_SP; - secondary_data.pgdir = virt_to_phys(pgd); + secondary_data.pgdir = virt_to_phys(idmap_pgd); secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir); __cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data)); outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1)); @@ -142,16 +124,6 @@ int __cpuinit __cpu_up(unsigned int cpu) secondary_data.stack = NULL; secondary_data.pgdir = 0; - if (PHYS_OFFSET != PAGE_OFFSET) { -#ifndef CONFIG_HOTPLUG_CPU - identity_mapping_del(pgd, __pa(__init_begin), __pa(__init_end)); -#endif - identity_mapping_del(pgd, __pa(_stext), __pa(_etext)); - identity_mapping_del(pgd, __pa(_sdata), __pa(_edata)); - } - - pgd_free(&init_mm, pgd); - return ret; } @@ -550,6 +522,10 @@ static void ipi_cpu_stop(unsigned int cpu) local_fiq_disable(); local_irq_disable(); +#ifdef CONFIG_HOTPLUG_CPU + platform_cpu_kill(cpu); +#endif + while (1) cpu_relax(); } diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index a8a6682d6b52..c8e938553d47 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -10,8 +10,11 @@ */ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/cpufreq.h> #include <linux/delay.h> #include <linux/device.h> +#include <linux/err.h> #include <linux/smp.h> #include <linux/jiffies.h> #include <linux/clockchips.h> @@ -25,6 +28,7 @@ /* set up by the platform code */ void __iomem *twd_base; +static struct clk *twd_clk; static unsigned long twd_timer_rate; static struct clock_event_device __percpu **twd_evt; @@ -89,6 +93,52 @@ void twd_timer_stop(struct clock_event_device *clk) disable_percpu_irq(clk->irq); } +#ifdef CONFIG_CPU_FREQ + +/* + * Updates clockevent frequency when the cpu frequency changes. + * Called on the cpu that is changing frequency with interrupts disabled. + */ +static void twd_update_frequency(void *data) +{ + twd_timer_rate = clk_get_rate(twd_clk); + + clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate); +} + +static int twd_cpufreq_transition(struct notifier_block *nb, + unsigned long state, void *data) +{ + struct cpufreq_freqs *freqs = data; + + /* + * The twd clock events must be reprogrammed to account for the new + * frequency. The timer is local to a cpu, so cross-call to the + * changing cpu. + */ + if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE) + smp_call_function_single(freqs->cpu, twd_update_frequency, + NULL, 1); + + return NOTIFY_OK; +} + +static struct notifier_block twd_cpufreq_nb = { + .notifier_call = twd_cpufreq_transition, +}; + +static int twd_cpufreq_init(void) +{ + if (!IS_ERR(twd_clk)) + return cpufreq_register_notifier(&twd_cpufreq_nb, + CPUFREQ_TRANSITION_NOTIFIER); + + return 0; +} +core_initcall(twd_cpufreq_init); + +#endif + static void __cpuinit twd_calibrate_rate(void) { unsigned long count; @@ -140,6 +190,35 @@ static irqreturn_t twd_handler(int irq, void *dev_id) return IRQ_NONE; } +static struct clk *twd_get_clock(void) +{ + struct clk *clk; + int err; + + clk = clk_get_sys("smp_twd", NULL); + if (IS_ERR(clk)) { + pr_err("smp_twd: clock not found: %d\n", (int)PTR_ERR(clk)); + return clk; + } + + err = clk_prepare(clk); + if (err) { + pr_err("smp_twd: clock failed to prepare: %d\n", err); + clk_put(clk); + return ERR_PTR(err); + } + + err = clk_enable(clk); + if (err) { + pr_err("smp_twd: clock failed to enable: %d\n", err); + clk_unprepare(clk); + clk_put(clk); + return ERR_PTR(err); + } + + return clk; +} + /* * Setup the local clock events for a CPU. */ @@ -165,7 +244,13 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) } } - twd_calibrate_rate(); + if (!twd_clk) + twd_clk = twd_get_clock(); + + if (!IS_ERR_OR_NULL(twd_clk)) + twd_timer_rate = clk_get_rate(twd_clk); + else + twd_calibrate_rate(); clk->name = "local_timer"; clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT | @@ -173,15 +258,11 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) clk->rating = 350; clk->set_mode = twd_set_mode; clk->set_next_event = twd_set_next_event; - clk->shift = 20; - clk->mult = div_sc(twd_timer_rate, NSEC_PER_SEC, clk->shift); - clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk); - clk->min_delta_ns = clockevent_delta2ns(0xf, clk); this_cpu_clk = __this_cpu_ptr(twd_evt); *this_cpu_clk = clk; - clockevents_register_device(clk); - + clockevents_config_and_register(clk, twd_timer_rate, + 0xf, 0xffffffff); enable_percpu_irq(clk->irq, 0); } diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c index 93a22d282c16..1794cc3b0f18 100644 --- a/arch/arm/kernel/suspend.c +++ b/arch/arm/kernel/suspend.c @@ -1,13 +1,12 @@ #include <linux/init.h> +#include <asm/idmap.h> #include <asm/pgalloc.h> #include <asm/pgtable.h> #include <asm/memory.h> #include <asm/suspend.h> #include <asm/tlbflush.h> -static pgd_t *suspend_pgd; - extern int __cpu_suspend(unsigned long, int (*)(unsigned long)); extern void cpu_resume_mmu(void); @@ -21,7 +20,7 @@ void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr) *save_ptr = virt_to_phys(ptr); /* This must correspond to the LDM in cpu_resume() assembly */ - *ptr++ = virt_to_phys(suspend_pgd); + *ptr++ = virt_to_phys(idmap_pgd); *ptr++ = sp; *ptr++ = virt_to_phys(cpu_do_resume); @@ -42,7 +41,7 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) struct mm_struct *mm = current->active_mm; int ret; - if (!suspend_pgd) + if (!idmap_pgd) return -EINVAL; /* @@ -59,14 +58,3 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) return ret; } - -static int __init cpu_suspend_init(void) -{ - suspend_pgd = pgd_alloc(&init_mm); - if (suspend_pgd) { - unsigned long addr = virt_to_phys(cpu_resume_mmu); - identity_mapping_add(suspend_pgd, addr, addr + SECTION_SIZE); - } - return suspend_pgd ? 0 : -ENOMEM; -} -core_initcall(cpu_suspend_init); diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index 5f452f8fde05..df745188f5de 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -25,6 +25,7 @@ #include <linux/syscalls.h> #include <linux/perf_event.h> +#include <asm/opcodes.h> #include <asm/traps.h> #include <asm/uaccess.h> @@ -185,6 +186,21 @@ static int swp_handler(struct pt_regs *regs, unsigned int instr) perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->ARM_pc); + res = arm_check_condition(instr, regs->ARM_cpsr); + switch (res) { + case ARM_OPCODE_CONDTEST_PASS: + break; + case ARM_OPCODE_CONDTEST_FAIL: + /* Condition failed - return to next instruction */ + regs->ARM_pc += 4; + return 0; + case ARM_OPCODE_CONDTEST_UNCOND: + /* If unconditional encoding - not a SWP, undef */ + return -EFAULT; + default: + return -EINVAL; + } + if (current->pid != previous_pid) { pr_debug("\"%s\" (%ld) uses deprecated SWP{B} instruction\n", current->comm, (unsigned long)current->pid); diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index 30e302d33e0a..01ec453bb924 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -180,9 +180,9 @@ static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks, */ void __init tcm_init(void) { - u32 tcm_status = read_cpuid_tcmstatus(); - u8 dtcm_banks = (tcm_status >> 16) & 0x03; - u8 itcm_banks = (tcm_status & 0x03); + u32 tcm_status; + u8 dtcm_banks; + u8 itcm_banks; size_t dtcm_code_sz = &__edtcm_data - &__sdtcm_data; size_t itcm_code_sz = &__eitcm_text - &__sitcm_text; char *start; @@ -191,6 +191,22 @@ void __init tcm_init(void) int ret; int i; + /* + * Prior to ARMv5 there is no TCM, and trying to read the status + * register will hang the processor. + */ + if (cpu_architecture() < CPU_ARCH_ARMv5) { + if (dtcm_code_sz || itcm_code_sz) + pr_info("CPU TCM: %u bytes of DTCM and %u bytes of " + "ITCM code compiled in, but no TCM present " + "in pre-v5 CPU\n", dtcm_code_sz, itcm_code_sz); + return; + } + + tcm_status = read_cpuid_tcmstatus(); + dtcm_banks = (tcm_status >> 16) & 0x03; + itcm_banks = (tcm_status & 0x03); + /* Values greater than 2 for D/ITCM banks are "reserved" */ if (dtcm_banks > 2) dtcm_banks = 0; diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index e7e8365795c3..00df012c4678 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -67,7 +67,7 @@ EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2); struct unwind_ctrl_block { unsigned long vrs[16]; /* virtual register set */ - unsigned long *insn; /* pointer to the current instructions word */ + const unsigned long *insn; /* pointer to the current instructions word */ int entries; /* number of entries left to interpret */ int byte; /* current byte number in the instructions word */ }; @@ -83,8 +83,9 @@ enum regs { PC = 15 }; -extern struct unwind_idx __start_unwind_idx[]; -extern struct unwind_idx __stop_unwind_idx[]; +extern const struct unwind_idx __start_unwind_idx[]; +static const struct unwind_idx *__origin_unwind_idx; +extern const struct unwind_idx __stop_unwind_idx[]; static DEFINE_SPINLOCK(unwind_lock); static LIST_HEAD(unwind_tables); @@ -98,45 +99,99 @@ static LIST_HEAD(unwind_tables); }) /* - * Binary search in the unwind index. The entries entries are + * Binary search in the unwind index. The entries are * guaranteed to be sorted in ascending order by the linker. + * + * start = first entry + * origin = first entry with positive offset (or stop if there is no such entry) + * stop - 1 = last entry */ -static struct unwind_idx *search_index(unsigned long addr, - struct unwind_idx *first, - struct unwind_idx *last) +static const struct unwind_idx *search_index(unsigned long addr, + const struct unwind_idx *start, + const struct unwind_idx *origin, + const struct unwind_idx *stop) { - pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last); + unsigned long addr_prel31; + + pr_debug("%s(%08lx, %p, %p, %p)\n", + __func__, addr, start, origin, stop); + + /* + * only search in the section with the matching sign. This way the + * prel31 numbers can be compared as unsigned longs. + */ + if (addr < (unsigned long)start) + /* negative offsets: [start; origin) */ + stop = origin; + else + /* positive offsets: [origin; stop) */ + start = origin; + + /* prel31 for address relavive to start */ + addr_prel31 = (addr - (unsigned long)start) & 0x7fffffff; - if (addr < first->addr) { + while (start < stop - 1) { + const struct unwind_idx *mid = start + ((stop - start) >> 1); + + /* + * As addr_prel31 is relative to start an offset is needed to + * make it relative to mid. + */ + if (addr_prel31 - ((unsigned long)mid - (unsigned long)start) < + mid->addr_offset) + stop = mid; + else { + /* keep addr_prel31 relative to start */ + addr_prel31 -= ((unsigned long)mid - + (unsigned long)start); + start = mid; + } + } + + if (likely(start->addr_offset <= addr_prel31)) + return start; + else { pr_warning("unwind: Unknown symbol address %08lx\n", addr); return NULL; - } else if (addr >= last->addr) - return last; + } +} - while (first < last - 1) { - struct unwind_idx *mid = first + ((last - first + 1) >> 1); +static const struct unwind_idx *unwind_find_origin( + const struct unwind_idx *start, const struct unwind_idx *stop) +{ + pr_debug("%s(%p, %p)\n", __func__, start, stop); + while (start < stop) { + const struct unwind_idx *mid = start + ((stop - start) >> 1); - if (addr < mid->addr) - last = mid; + if (mid->addr_offset >= 0x40000000) + /* negative offset */ + start = mid + 1; else - first = mid; + /* positive offset */ + stop = mid; } - - return first; + pr_debug("%s -> %p\n", __func__, stop); + return stop; } -static struct unwind_idx *unwind_find_idx(unsigned long addr) +static const struct unwind_idx *unwind_find_idx(unsigned long addr) { - struct unwind_idx *idx = NULL; + const struct unwind_idx *idx = NULL; unsigned long flags; pr_debug("%s(%08lx)\n", __func__, addr); - if (core_kernel_text(addr)) + if (core_kernel_text(addr)) { + if (unlikely(!__origin_unwind_idx)) + __origin_unwind_idx = + unwind_find_origin(__start_unwind_idx, + __stop_unwind_idx); + /* main unwind table */ idx = search_index(addr, __start_unwind_idx, - __stop_unwind_idx - 1); - else { + __origin_unwind_idx, + __stop_unwind_idx); + } else { /* module unwind tables */ struct unwind_table *table; @@ -145,7 +200,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr) if (addr >= table->begin_addr && addr < table->end_addr) { idx = search_index(addr, table->start, - table->stop - 1); + table->origin, + table->stop); /* Move-to-front to exploit common traces */ list_move(&table->list, &unwind_tables); break; @@ -274,7 +330,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl) int unwind_frame(struct stackframe *frame) { unsigned long high, low; - struct unwind_idx *idx; + const struct unwind_idx *idx; struct unwind_ctrl_block ctrl; /* only go to a higher address on the stack */ @@ -399,7 +455,6 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size, unsigned long text_size) { unsigned long flags; - struct unwind_idx *idx; struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL); pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size, @@ -408,15 +463,12 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size, if (!tab) return tab; - tab->start = (struct unwind_idx *)start; - tab->stop = (struct unwind_idx *)(start + size); + tab->start = (const struct unwind_idx *)start; + tab->stop = (const struct unwind_idx *)(start + size); + tab->origin = unwind_find_origin(tab->start, tab->stop); tab->begin_addr = text_addr; tab->end_addr = text_addr + text_size; - /* Convert the symbol addresses to absolute values */ - for (idx = tab->start; idx < tab->stop; idx++) - idx->addr = prel31_to_addr(&idx->addr); - spin_lock_irqsave(&unwind_lock, flags); list_add_tail(&tab->list, &unwind_tables); spin_unlock_irqrestore(&unwind_lock, flags); @@ -437,16 +489,3 @@ void unwind_table_del(struct unwind_table *tab) kfree(tab); } - -int __init unwind_init(void) -{ - struct unwind_idx *idx; - - /* Convert the symbol addresses to absolute values */ - for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++) - idx->addr = prel31_to_addr(&idx->addr); - - pr_debug("unwind: ARM stack unwinding initialised\n"); - - return 0; -} diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 20b3041e0860..f76e75548670 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -13,6 +13,12 @@ *(.proc.info.init) \ VMLINUX_SYMBOL(__proc_info_end) = .; +#define IDMAP_TEXT \ + ALIGN_FUNCTION(); \ + VMLINUX_SYMBOL(__idmap_text_start) = .; \ + *(.idmap.text) \ + VMLINUX_SYMBOL(__idmap_text_end) = .; + #ifdef CONFIG_HOTPLUG_CPU #define ARM_CPU_DISCARD(x) #define ARM_CPU_KEEP(x) x @@ -92,6 +98,7 @@ SECTIONS SCHED_TEXT LOCK_TEXT KPROBES_TEXT + IDMAP_TEXT #ifdef CONFIG_MMU *(.fixup) #endif diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index cf73a7f742dd..0ade0acc1ed9 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -13,7 +13,8 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ testchangebit.o testclearbit.o testsetbit.o \ ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ ucmpdi2.o lib1funcs.o div64.o \ - io-readsb.o io-writesb.o io-readsl.o io-writesl.o + io-readsb.o io-writesb.o io-readsl.o io-writesl.o \ + call_with_stack.o mmu-y := clear_user.o copy_page.o getuser.o putuser.o diff --git a/arch/arm/lib/call_with_stack.S b/arch/arm/lib/call_with_stack.S new file mode 100644 index 000000000000..916c80f13ae7 --- /dev/null +++ b/arch/arm/lib/call_with_stack.S @@ -0,0 +1,44 @@ +/* + * arch/arm/lib/call_with_stack.S + * + * Copyright (C) 2011 ARM Ltd. + * Written by Will Deacon <will.deacon@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +/* + * void call_with_stack(void (*fn)(void *), void *arg, void *sp) + * + * Change the stack to that pointed at by sp, then invoke fn(arg) with + * the new stack. + */ +ENTRY(call_with_stack) + str sp, [r2, #-4]! + str lr, [r2, #-4]! + + mov sp, r2 + mov r2, r0 + mov r0, r1 + + adr lr, BSYM(1f) + mov pc, r2 + +1: ldr lr, [sp] + ldr sp, [sp, #4] + mov pc, lr +ENDPROC(call_with_stack) diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index d111c3e99249..4f991f295284 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -3,6 +3,12 @@ if ARCH_AT91 config HAVE_AT91_DATAFLASH_CARD bool +config HAVE_AT91_DBGU0 + bool + +config HAVE_AT91_DBGU1 + bool + config HAVE_AT91_USART3 bool @@ -21,12 +27,14 @@ config ARCH_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T select GENERIC_CLOCKEVENTS + select HAVE_AT91_DBGU0 select HAVE_AT91_USART3 config ARCH_AT91SAM9260 bool "AT91SAM9260 or AT91SAM9XE" select CPU_ARM926T select GENERIC_CLOCKEVENTS + select HAVE_AT91_DBGU0 select HAVE_AT91_USART3 select HAVE_AT91_USART4 select HAVE_AT91_USART5 @@ -37,11 +45,13 @@ config ARCH_AT91SAM9261 select CPU_ARM926T select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL + select HAVE_AT91_DBGU0 config ARCH_AT91SAM9G10 bool "AT91SAM9G10" select CPU_ARM926T select GENERIC_CLOCKEVENTS + select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL config ARCH_AT91SAM9263 @@ -50,6 +60,7 @@ config ARCH_AT91SAM9263 select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL select HAVE_NET_MACB + select HAVE_AT91_DBGU1 config ARCH_AT91SAM9RL bool "AT91SAM9RL" @@ -57,11 +68,13 @@ config ARCH_AT91SAM9RL select GENERIC_CLOCKEVENTS select HAVE_AT91_USART3 select HAVE_FB_ATMEL + select HAVE_AT91_DBGU0 config ARCH_AT91SAM9G20 bool "AT91SAM9G20" select CPU_ARM926T select GENERIC_CLOCKEVENTS + select HAVE_AT91_DBGU0 select HAVE_AT91_USART3 select HAVE_AT91_USART4 select HAVE_AT91_USART5 @@ -74,6 +87,7 @@ config ARCH_AT91SAM9G45 select HAVE_AT91_USART3 select HAVE_FB_ATMEL select HAVE_NET_MACB + select HAVE_AT91_DBGU1 config ARCH_AT91CAP9 bool "AT91CAP9" @@ -81,6 +95,7 @@ config ARCH_AT91CAP9 select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL select HAVE_NET_MACB + select HAVE_AT91_DBGU1 config ARCH_AT91X40 bool "AT91x40" @@ -510,8 +525,13 @@ config AT91_TIMER_HZ choice prompt "Select a UART for early kernel messages" -config AT91_EARLY_DBGU - bool "DBGU" +config AT91_EARLY_DBGU0 + bool "DBGU on rm9200, 9260/9g20, 9261/9g10 and 9rl" + depends on HAVE_AT91_DBGU0 + +config AT91_EARLY_DBGU1 + bool "DBGU on 9263, 9g45 and cap9" + depends on HAVE_AT91_DBGU1 config AT91_EARLY_USART0 bool "USART0" diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index ecdd54dd68c6..edb879ac04c8 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -13,7 +13,6 @@ */ #include <linux/module.h> -#include <linux/pm.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -23,11 +22,11 @@ #include <mach/at91cap9.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> -#include <mach/at91_shdwc.h> #include "soc.h" #include "generic.h" #include "clock.h" +#include "sam9_smc.h" /* -------------------------------------------------------------------- * Clocks @@ -137,7 +136,7 @@ static struct clk pwm_clk = { .type = CLK_TYPE_PERIPHERAL, }; static struct clk macb_clk = { - .name = "macb_clk", + .name = "pclk", .pmc_mask = 1 << AT91CAP9_ID_EMAC, .type = CLK_TYPE_PERIPHERAL, }; @@ -210,6 +209,8 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { + /* One additional fake clock for macb_hclk */ + CLKDEV_CON_ID("hclk", &macb_clk), CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), @@ -221,6 +222,10 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), + CLKDEV_CON_ID("pioA", &pioABCD_clk), + CLKDEV_CON_ID("pioB", &pioABCD_clk), + CLKDEV_CON_ID("pioC", &pioABCD_clk), + CLKDEV_CON_ID("pioD", &pioABCD_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -293,37 +298,27 @@ void __init at91cap9_set_console_clock(int id) * GPIO * -------------------------------------------------------------------- */ -static struct at91_gpio_bank at91cap9_gpio[] = { +static struct at91_gpio_bank at91cap9_gpio[] __initdata = { { .id = AT91CAP9_ID_PIOABCD, - .offset = AT91_PIOA, - .clock = &pioABCD_clk, + .regbase = AT91CAP9_BASE_PIOA, }, { .id = AT91CAP9_ID_PIOABCD, - .offset = AT91_PIOB, - .clock = &pioABCD_clk, + .regbase = AT91CAP9_BASE_PIOB, }, { .id = AT91CAP9_ID_PIOABCD, - .offset = AT91_PIOC, - .clock = &pioABCD_clk, + .regbase = AT91CAP9_BASE_PIOC, }, { .id = AT91CAP9_ID_PIOABCD, - .offset = AT91_PIOD, - .clock = &pioABCD_clk, + .regbase = AT91CAP9_BASE_PIOD, } }; -static void at91cap9_reset(void) +static void at91cap9_restart(char mode, const char *cmd) { at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } -static void at91cap9_poweroff(void) -{ - at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); -} - - /* -------------------------------------------------------------------- * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ @@ -333,10 +328,16 @@ static void __init at91cap9_map_io(void) at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE); } +static void __init at91cap9_ioremap_registers(void) +{ + at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC); + at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT); + at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC); +} + static void __init at91cap9_initialize(void) { - at91_arch_reset = at91cap9_reset; - pm_power_off = at91cap9_poweroff; + arm_pm_restart = at91cap9_restart; at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); /* Register GPIO subsystem */ @@ -394,6 +395,7 @@ static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = { struct at91_init_soc __initdata at91cap9_soc = { .map_io = at91cap9_map_io, .default_irq_priority = at91cap9_default_irq_priority, + .ioremap_registers = at91cap9_ioremap_registers, .register_clocks = at91cap9_register_clocks, .init = at91cap9_initialize, }; diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index adad70db70eb..d298fb7cb210 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -76,7 +76,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable VBus control for UHP ports */ for (i = 0; i < data->ports; i++) { - if (data->vbus_pin[i]) + if (gpio_is_valid(data->vbus_pin[i])) at91_set_gpio_output(data->vbus_pin[i], 0); } @@ -179,7 +179,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data) usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep); memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep)); - if (data && data->vbus_pin > 0) { + if (data && gpio_is_valid(data->vbus_pin)) { at91_set_gpio_input(data->vbus_pin, 0); at91_set_deglitch(data->vbus_pin, 1); usba_udc_data.pdata.vbus_pin = data->vbus_pin; @@ -200,7 +200,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {} #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct at91_eth_data eth_data; +static struct macb_platform_data eth_data; static struct resource eth_resources[] = { [0] = { @@ -227,12 +227,12 @@ static struct platform_device at91cap9_eth_device = { .num_resources = ARRAY_SIZE(eth_resources), }; -void __init at91_add_device_eth(struct at91_eth_data *data) +void __init at91_add_device_eth(struct macb_platform_data *data) { if (!data) return; - if (data->phy_irq_pin) { + if (gpio_is_valid(data->phy_irq_pin)) { at91_set_gpio_input(data->phy_irq_pin, 0); at91_set_deglitch(data->phy_irq_pin, 1); } @@ -264,7 +264,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data) platform_device_register(&at91cap9_eth_device); } #else -void __init at91_add_device_eth(struct at91_eth_data *data) {} +void __init at91_add_device_eth(struct macb_platform_data *data) {} #endif @@ -332,13 +332,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) return; /* input/irq */ - if (data->det_pin) { + if (gpio_is_valid(data->det_pin)) { at91_set_gpio_input(data->det_pin, 1); at91_set_deglitch(data->det_pin, 1); } - if (data->wp_pin) + if (gpio_is_valid(data->wp_pin)) at91_set_gpio_input(data->wp_pin, 1); - if (data->vcc_pin) + if (gpio_is_valid(data->vcc_pin)) at91_set_gpio_output(data->vcc_pin, 0); if (mmc_id == 0) { /* MCI0 */ @@ -398,8 +398,8 @@ static struct resource nand_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_BASE_SYS + AT91_ECC, - .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1, + .start = AT91CAP9_BASE_ECC, + .end = AT91CAP9_BASE_ECC + SZ_512 - 1, .flags = IORESOURCE_MEM, } }; @@ -425,15 +425,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); /* enable pin */ - if (data->enable_pin) + if (gpio_is_valid(data->enable_pin)) at91_set_gpio_output(data->enable_pin, 1); /* ready/busy pin */ - if (data->rdy_pin) + if (gpio_is_valid(data->rdy_pin)) at91_set_gpio_input(data->rdy_pin, 1); /* card detect pin */ - if (data->det_pin) + if (gpio_is_valid(data->det_pin)) at91_set_gpio_input(data->det_pin, 1); nand_data = *data; @@ -670,8 +670,8 @@ static void __init at91_add_device_tc(void) { } static struct resource rtt_resources[] = { { - .start = AT91_BASE_SYS + AT91_RTT, - .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, + .start = AT91CAP9_BASE_RTT, + .end = AT91CAP9_BASE_RTT + SZ_16 - 1, .flags = IORESOURCE_MEM, } }; @@ -694,10 +694,19 @@ static void __init at91_add_device_rtt(void) * -------------------------------------------------------------------- */ #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) +static struct resource wdt_resources[] = { + { + .start = AT91CAP9_BASE_WDT, + .end = AT91CAP9_BASE_WDT + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + static struct platform_device at91cap9_wdt_device = { .name = "at91_wdt", .id = -1, - .num_resources = 0, + .resource = wdt_resources, + .num_resources = ARRAY_SIZE(wdt_resources), }; static void __init at91_add_device_watchdog(void) @@ -807,7 +816,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data) at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */ /* reset */ - if (data->reset_pin) + if (gpio_is_valid(data->reset_pin)) at91_set_gpio_output(data->reset_pin, 0); ac97_data = *data; @@ -1021,8 +1030,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_BASE_SYS + AT91_DBGU, - .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91CAP9_BASE_DBGU, + .end = AT91CAP9_BASE_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 713d3bdbd284..99c3174e24a2 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -23,6 +23,7 @@ #include "soc.h" #include "generic.h" #include "clock.h" +#include "sam9_smc.h" static struct map_desc at91rm9200_io_desc[] __initdata = { { @@ -195,6 +196,10 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), + CLKDEV_CON_ID("pioA", &pioA_clk), + CLKDEV_CON_ID("pioB", &pioB_clk), + CLKDEV_CON_ID("pioC", &pioC_clk), + CLKDEV_CON_ID("pioD", &pioD_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -268,27 +273,23 @@ void __init at91rm9200_set_console_clock(int id) * GPIO * -------------------------------------------------------------------- */ -static struct at91_gpio_bank at91rm9200_gpio[] = { +static struct at91_gpio_bank at91rm9200_gpio[] __initdata = { { .id = AT91RM9200_ID_PIOA, - .offset = AT91_PIOA, - .clock = &pioA_clk, + .regbase = AT91RM9200_BASE_PIOA, }, { .id = AT91RM9200_ID_PIOB, - .offset = AT91_PIOB, - .clock = &pioB_clk, + .regbase = AT91RM9200_BASE_PIOB, }, { .id = AT91RM9200_ID_PIOC, - .offset = AT91_PIOC, - .clock = &pioC_clk, + .regbase = AT91RM9200_BASE_PIOC, }, { .id = AT91RM9200_ID_PIOD, - .offset = AT91_PIOD, - .clock = &pioD_clk, + .regbase = AT91RM9200_BASE_PIOD, } }; -static void at91rm9200_reset(void) +static void at91rm9200_restart(char mode, const char *cmd) { /* * Perform a hardware reset with the use of the Watchdog timer. @@ -307,9 +308,13 @@ static void __init at91rm9200_map_io(void) iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); } +static void __init at91rm9200_ioremap_registers(void) +{ +} + static void __init at91rm9200_initialize(void) { - at91_arch_reset = at91rm9200_reset; + arm_pm_restart = at91rm9200_restart; at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5) @@ -366,6 +371,7 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { struct at91_init_soc __initdata at91rm9200_soc = { .map_io = at91rm9200_map_io, .default_irq_priority = at91rm9200_default_irq_priority, + .ioremap_registers = at91rm9200_ioremap_registers, .register_clocks = at91rm9200_register_clocks, .init = at91rm9200_initialize, }; diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 66591fa53e05..18bacec2b094 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { @@ -114,11 +114,11 @@ void __init at91_add_device_udc(struct at91_udc_data *data) if (!data) return; - if (data->vbus_pin) { + if (gpio_is_valid(data->vbus_pin)) { at91_set_gpio_input(data->vbus_pin, 0); at91_set_deglitch(data->vbus_pin, 1); } - if (data->pullup_pin) + if (gpio_is_valid(data->pullup_pin)) at91_set_gpio_output(data->pullup_pin, 0); udc_data = *data; @@ -135,7 +135,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} #if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE) static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct at91_eth_data eth_data; +static struct macb_platform_data eth_data; static struct resource eth_resources[] = { [0] = { @@ -162,12 +162,12 @@ static struct platform_device at91rm9200_eth_device = { .num_resources = ARRAY_SIZE(eth_resources), }; -void __init at91_add_device_eth(struct at91_eth_data *data) +void __init at91_add_device_eth(struct macb_platform_data *data) { if (!data) return; - if (data->phy_irq_pin) { + if (gpio_is_valid(data->phy_irq_pin)) { at91_set_gpio_input(data->phy_irq_pin, 0); at91_set_deglitch(data->phy_irq_pin, 1); } @@ -199,7 +199,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data) platform_device_register(&at91rm9200_eth_device); } #else -void __init at91_add_device_eth(struct at91_eth_data *data) {} +void __init at91_add_device_eth(struct macb_platform_data *data) {} #endif @@ -260,7 +260,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) ); /* input/irq */ - if (data->irq_pin) { + if (gpio_is_valid(data->irq_pin)) { at91_set_gpio_input(data->irq_pin, 1); at91_set_deglitch(data->irq_pin, 1); } @@ -268,7 +268,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) at91_set_deglitch(data->det_pin, 1); /* outputs, initially off */ - if (data->vcc_pin) + if (gpio_is_valid(data->vcc_pin)) at91_set_gpio_output(data->vcc_pin, 0); at91_set_gpio_output(data->rst_pin, 0); @@ -328,13 +328,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) return; /* input/irq */ - if (data->det_pin) { + if (gpio_is_valid(data->det_pin)) { at91_set_gpio_input(data->det_pin, 1); at91_set_deglitch(data->det_pin, 1); } - if (data->wp_pin) + if (gpio_is_valid(data->wp_pin)) at91_set_gpio_input(data->wp_pin, 1); - if (data->vcc_pin) + if (gpio_is_valid(data->vcc_pin)) at91_set_gpio_output(data->vcc_pin, 0); /* CLK */ @@ -419,15 +419,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) ); /* enable pin */ - if (data->enable_pin) + if (gpio_is_valid(data->enable_pin)) at91_set_gpio_output(data->enable_pin, 1); /* ready/busy pin */ - if (data->rdy_pin) + if (gpio_is_valid(data->rdy_pin)) at91_set_gpio_input(data->rdy_pin, 1); /* card detect pin */ - if (data->det_pin) + if (gpio_is_valid(data->det_pin)) at91_set_gpio_input(data->det_pin, 1); at91_set_A_periph(AT91_PIN_PC1, 0); /* SMOE */ @@ -665,10 +665,24 @@ static void __init at91_add_device_tc(void) { } * -------------------------------------------------------------------- */ #if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE) +static struct resource rtc_resources[] = { + [0] = { + .start = AT91RM9200_BASE_RTC, + .end = AT91RM9200_BASE_RTC + SZ_256 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_ID_SYS, + .end = AT91_ID_SYS, + .flags = IORESOURCE_IRQ, + }, +}; + static struct platform_device at91rm9200_rtc_device = { .name = "at91_rtc", .id = -1, - .num_resources = 0, + .resource = rtc_resources, + .num_resources = ARRAY_SIZE(rtc_resources), }; static void __init at91_add_device_rtc(void) @@ -877,8 +891,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_BASE_SYS + AT91_DBGU, - .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91RM9200_BASE_DBGU, + .end = AT91RM9200_BASE_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 1dd69c85dfec..a028cdf8f974 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -32,6 +32,8 @@ static unsigned long last_crtr; static u32 irqmask; static struct clock_event_device clkevt; +#define RM9200_TIMER_LATCH ((AT91_SLOW_CLOCK + HZ/2) / HZ) + /* * The ST_CRTR is updated asynchronously to the master clock ... but * the updates as seen by the CPU don't seem to be strictly monotonic. @@ -74,8 +76,8 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id) if (sr & AT91_ST_PITS) { u32 crtr = read_CRTR(); - while (((crtr - last_crtr) & AT91_ST_CRTV) >= LATCH) { - last_crtr += LATCH; + while (((crtr - last_crtr) & AT91_ST_CRTV) >= RM9200_TIMER_LATCH) { + last_crtr += RM9200_TIMER_LATCH; clkevt.event_handler(&clkevt); } return IRQ_HANDLED; @@ -116,7 +118,7 @@ clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev) case CLOCK_EVT_MODE_PERIODIC: /* PIT for periodic irqs; fixed rate of 1/HZ */ irqmask = AT91_ST_PITS; - at91_sys_write(AT91_ST_PIMR, LATCH); + at91_sys_write(AT91_ST_PIMR, RM9200_TIMER_LATCH); break; case CLOCK_EVT_MODE_ONESHOT: /* ALM for oneshot irqs, set by next_event() diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index b84a9f642f59..5e46e4a96430 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -11,7 +11,6 @@ */ #include <linux/module.h> -#include <linux/pm.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -21,11 +20,11 @@ #include <mach/at91sam9260.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> -#include <mach/at91_shdwc.h> #include "soc.h" #include "generic.h" #include "clock.h" +#include "sam9_smc.h" /* -------------------------------------------------------------------- * Clocks @@ -120,7 +119,7 @@ static struct clk ohci_clk = { .type = CLK_TYPE_PERIPHERAL, }; static struct clk macb_clk = { - .name = "macb_clk", + .name = "pclk", .pmc_mask = 1 << AT91SAM9260_ID_EMAC, .type = CLK_TYPE_PERIPHERAL, }; @@ -190,14 +189,16 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { + /* One additional fake clock for macb_hclk */ + CLKDEV_CON_ID("hclk", &macb_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), - CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk), - CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk), - CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), @@ -209,6 +210,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), + CLKDEV_CON_ID("pioA", &pioA_clk), + CLKDEV_CON_ID("pioB", &pioB_clk), + CLKDEV_CON_ID("pioC", &pioC_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -270,28 +274,19 @@ void __init at91sam9260_set_console_clock(int id) * GPIO * -------------------------------------------------------------------- */ -static struct at91_gpio_bank at91sam9260_gpio[] = { +static struct at91_gpio_bank at91sam9260_gpio[] __initdata = { { .id = AT91SAM9260_ID_PIOA, - .offset = AT91_PIOA, - .clock = &pioA_clk, + .regbase = AT91SAM9260_BASE_PIOA, }, { .id = AT91SAM9260_ID_PIOB, - .offset = AT91_PIOB, - .clock = &pioB_clk, + .regbase = AT91SAM9260_BASE_PIOB, }, { .id = AT91SAM9260_ID_PIOC, - .offset = AT91_PIOC, - .clock = &pioC_clk, + .regbase = AT91SAM9260_BASE_PIOC, } }; -static void at91sam9260_poweroff(void) -{ - at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); -} - - /* -------------------------------------------------------------------- * AT91SAM9260 processor initialization * -------------------------------------------------------------------- */ @@ -325,10 +320,16 @@ static void __init at91sam9260_map_io(void) } } +static void __init at91sam9260_ioremap_registers(void) +{ + at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC); + at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT); + at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC); +} + static void __init at91sam9260_initialize(void) { - at91_arch_reset = at91sam9_alt_reset; - pm_power_off = at91sam9260_poweroff; + arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) | (1 << AT91SAM9260_ID_IRQ2); @@ -381,6 +382,7 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { struct at91_init_soc __initdata at91sam9260_soc = { .map_io = at91sam9260_map_io, .default_irq_priority = at91sam9260_default_irq_priority, + .ioremap_registers = at91sam9260_ioremap_registers, .register_clocks = at91sam9260_register_clocks, .init = at91sam9260_initialize, }; diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 25e3464fb07f..642ccb6d26b2 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { @@ -115,7 +115,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) if (!data) return; - if (data->vbus_pin) { + if (gpio_is_valid(data->vbus_pin)) { at91_set_gpio_input(data->vbus_pin, 0); at91_set_deglitch(data->vbus_pin, 1); } @@ -136,7 +136,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct at91_eth_data eth_data; +static struct macb_platform_data eth_data; static struct resource eth_resources[] = { [0] = { @@ -163,12 +163,12 @@ static struct platform_device at91sam9260_eth_device = { .num_resources = ARRAY_SIZE(eth_resources), }; -void __init at91_add_device_eth(struct at91_eth_data *data) +void __init at91_add_device_eth(struct macb_platform_data *data) { if (!data) return; - if (data->phy_irq_pin) { + if (gpio_is_valid(data->phy_irq_pin)) { at91_set_gpio_input(data->phy_irq_pin, 0); at91_set_deglitch(data->phy_irq_pin, 1); } @@ -200,7 +200,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data) platform_device_register(&at91sam9260_eth_device); } #else -void __init at91_add_device_eth(struct at91_eth_data *data) {} +void __init at91_add_device_eth(struct macb_platform_data *data) {} #endif @@ -243,13 +243,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) return; /* input/irq */ - if (data->det_pin) { + if (gpio_is_valid(data->det_pin)) { at91_set_gpio_input(data->det_pin, 1); at91_set_deglitch(data->det_pin, 1); } - if (data->wp_pin) + if (gpio_is_valid(data->wp_pin)) at91_set_gpio_input(data->wp_pin, 1); - if (data->vcc_pin) + if (gpio_is_valid(data->vcc_pin)) at91_set_gpio_output(data->vcc_pin, 0); /* CLK */ @@ -330,11 +330,11 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { if (data->slot[i].bus_width) { /* input/irq */ - if (data->slot[i].detect_pin) { + if (gpio_is_valid(data->slot[i].detect_pin)) { at91_set_gpio_input(data->slot[i].detect_pin, 1); at91_set_deglitch(data->slot[i].detect_pin, 1); } - if (data->slot[i].wp_pin) + if (gpio_is_valid(data->slot[i].wp_pin)) at91_set_gpio_input(data->slot[i].wp_pin, 1); switch (i) { @@ -399,8 +399,8 @@ static struct resource nand_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_BASE_SYS + AT91_ECC, - .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1, + .start = AT91SAM9260_BASE_ECC, + .end = AT91SAM9260_BASE_ECC + SZ_512 - 1, .flags = IORESOURCE_MEM, } }; @@ -426,15 +426,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* enable pin */ - if (data->enable_pin) + if (gpio_is_valid(data->enable_pin)) at91_set_gpio_output(data->enable_pin, 1); /* ready/busy pin */ - if (data->rdy_pin) + if (gpio_is_valid(data->rdy_pin)) at91_set_gpio_input(data->rdy_pin, 1); /* card detect pin */ - if (data->det_pin) + if (gpio_is_valid(data->det_pin)) at91_set_gpio_input(data->det_pin, 1); nand_data = *data; @@ -714,8 +714,8 @@ static void __init at91_add_device_tc(void) { } static struct resource rtt_resources[] = { { - .start = AT91_BASE_SYS + AT91_RTT, - .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, + .start = AT91SAM9260_BASE_RTT, + .end = AT91SAM9260_BASE_RTT + SZ_16 - 1, .flags = IORESOURCE_MEM, } }; @@ -738,10 +738,19 @@ static void __init at91_add_device_rtt(void) * -------------------------------------------------------------------- */ #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) +static struct resource wdt_resources[] = { + { + .start = AT91SAM9260_BASE_WDT, + .end = AT91SAM9260_BASE_WDT + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + static struct platform_device at91sam9260_wdt_device = { .name = "at91_wdt", .id = -1, - .num_resources = 0, + .resource = wdt_resources, + .num_resources = ARRAY_SIZE(wdt_resources), }; static void __init at91_add_device_watchdog(void) @@ -837,8 +846,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_BASE_SYS + AT91_DBGU, - .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91SAM9260_BASE_DBGU, + .end = AT91SAM9260_BASE_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -1281,17 +1290,17 @@ void __init at91_add_device_cf(struct at91_cf_data *data) at91_sys_write(AT91_MATRIX_EBICSA, csa); - if (data->rst_pin) { + if (gpio_is_valid(data->rst_pin)) { at91_set_multi_drive(data->rst_pin, 0); at91_set_gpio_output(data->rst_pin, 1); } - if (data->irq_pin) { + if (gpio_is_valid(data->irq_pin)) { at91_set_gpio_input(data->irq_pin, 0); at91_set_deglitch(data->irq_pin, 1); } - if (data->det_pin) { + if (gpio_is_valid(data->det_pin)) { at91_set_gpio_input(data->det_pin, 0); at91_set_deglitch(data->det_pin, 1); } diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 658a5185abfd..b85b9ea60170 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -11,7 +11,6 @@ */ #include <linux/module.h> -#include <linux/pm.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -20,11 +19,11 @@ #include <mach/at91sam9261.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> -#include <mach/at91_shdwc.h> #include "soc.h" #include "generic.h" #include "clock.h" +#include "sam9_smc.h" /* -------------------------------------------------------------------- * Clocks @@ -176,6 +175,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0), + CLKDEV_CON_ID("pioA", &pioA_clk), + CLKDEV_CON_ID("pioB", &pioB_clk), + CLKDEV_CON_ID("pioC", &pioC_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -251,28 +253,19 @@ void __init at91sam9261_set_console_clock(int id) * GPIO * -------------------------------------------------------------------- */ -static struct at91_gpio_bank at91sam9261_gpio[] = { +static struct at91_gpio_bank at91sam9261_gpio[] __initdata = { { .id = AT91SAM9261_ID_PIOA, - .offset = AT91_PIOA, - .clock = &pioA_clk, + .regbase = AT91SAM9261_BASE_PIOA, }, { .id = AT91SAM9261_ID_PIOB, - .offset = AT91_PIOB, - .clock = &pioB_clk, + .regbase = AT91SAM9261_BASE_PIOB, }, { .id = AT91SAM9261_ID_PIOC, - .offset = AT91_PIOC, - .clock = &pioC_clk, + .regbase = AT91SAM9261_BASE_PIOC, } }; -static void at91sam9261_poweroff(void) -{ - at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); -} - - /* -------------------------------------------------------------------- * AT91SAM9261 processor initialization * -------------------------------------------------------------------- */ @@ -285,10 +278,16 @@ static void __init at91sam9261_map_io(void) at91_init_sram(0, AT91SAM9261_SRAM_BASE, AT91SAM9261_SRAM_SIZE); } +static void __init at91sam9261_ioremap_registers(void) +{ + at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC); + at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT); + at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC); +} + static void __init at91sam9261_initialize(void) { - at91_arch_reset = at91sam9_alt_reset; - pm_power_off = at91sam9261_poweroff; + arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) | (1 << AT91SAM9261_ID_IRQ2); @@ -341,6 +340,7 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { struct at91_init_soc __initdata at91sam9261_soc = { .map_io = at91sam9261_map_io, .default_irq_priority = at91sam9261_default_irq_priority, + .ioremap_registers = at91sam9261_ioremap_registers, .register_clocks = at91sam9261_register_clocks, .init = at91sam9261_initialize, }; diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index ae78f4d03b73..fc59cbdb0e3c 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { @@ -118,7 +118,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) if (!data) return; - if (data->vbus_pin) { + if (gpio_is_valid(data->vbus_pin)) { at91_set_gpio_input(data->vbus_pin, 0); at91_set_deglitch(data->vbus_pin, 1); } @@ -171,13 +171,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) return; /* input/irq */ - if (data->det_pin) { + if (gpio_is_valid(data->det_pin)) { at91_set_gpio_input(data->det_pin, 1); at91_set_deglitch(data->det_pin, 1); } - if (data->wp_pin) + if (gpio_is_valid(data->wp_pin)) at91_set_gpio_input(data->wp_pin, 1); - if (data->vcc_pin) + if (gpio_is_valid(data->vcc_pin)) at91_set_gpio_output(data->vcc_pin, 0); /* CLK */ @@ -240,15 +240,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* enable pin */ - if (data->enable_pin) + if (gpio_is_valid(data->enable_pin)) at91_set_gpio_output(data->enable_pin, 1); /* ready/busy pin */ - if (data->rdy_pin) + if (gpio_is_valid(data->rdy_pin)) at91_set_gpio_input(data->rdy_pin, 1); /* card detect pin */ - if (data->det_pin) + if (gpio_is_valid(data->det_pin)) at91_set_gpio_input(data->det_pin, 1); at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */ @@ -600,8 +600,8 @@ static void __init at91_add_device_tc(void) { } static struct resource rtt_resources[] = { { - .start = AT91_BASE_SYS + AT91_RTT, - .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, + .start = AT91SAM9261_BASE_RTT, + .end = AT91SAM9261_BASE_RTT + SZ_16 - 1, .flags = IORESOURCE_MEM, } }; @@ -624,10 +624,19 @@ static void __init at91_add_device_rtt(void) * -------------------------------------------------------------------- */ #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) +static struct resource wdt_resources[] = { + { + .start = AT91SAM9261_BASE_WDT, + .end = AT91SAM9261_BASE_WDT + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + static struct platform_device at91sam9261_wdt_device = { .name = "at91_wdt", .id = -1, - .num_resources = 0, + .resource = wdt_resources, + .num_resources = ARRAY_SIZE(wdt_resources), }; static void __init at91_add_device_watchdog(void) @@ -816,8 +825,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_BASE_SYS + AT91_DBGU, - .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91SAM9261_BASE_DBGU, + .end = AT91SAM9261_BASE_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index f83fbb0ee0c5..79e3669b1117 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -11,7 +11,6 @@ */ #include <linux/module.h> -#include <linux/pm.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -19,11 +18,11 @@ #include <mach/at91sam9263.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> -#include <mach/at91_shdwc.h> #include "soc.h" #include "generic.h" #include "clock.h" +#include "sam9_smc.h" /* -------------------------------------------------------------------- * Clocks @@ -118,7 +117,7 @@ static struct clk pwm_clk = { .type = CLK_TYPE_PERIPHERAL, }; static struct clk macb_clk = { - .name = "macb_clk", + .name = "pclk", .pmc_mask = 1 << AT91SAM9263_ID_EMAC, .type = CLK_TYPE_PERIPHERAL, }; @@ -182,6 +181,8 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { + /* One additional fake clock for macb_hclk */ + CLKDEV_CON_ID("hclk", &macb_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), @@ -191,6 +192,11 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), + CLKDEV_CON_ID("pioA", &pioA_clk), + CLKDEV_CON_ID("pioB", &pioB_clk), + CLKDEV_CON_ID("pioC", &pioCDE_clk), + CLKDEV_CON_ID("pioD", &pioCDE_clk), + CLKDEV_CON_ID("pioE", &pioCDE_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -263,36 +269,25 @@ void __init at91sam9263_set_console_clock(int id) * GPIO * -------------------------------------------------------------------- */ -static struct at91_gpio_bank at91sam9263_gpio[] = { +static struct at91_gpio_bank at91sam9263_gpio[] __initdata = { { .id = AT91SAM9263_ID_PIOA, - .offset = AT91_PIOA, - .clock = &pioA_clk, + .regbase = AT91SAM9263_BASE_PIOA, }, { .id = AT91SAM9263_ID_PIOB, - .offset = AT91_PIOB, - .clock = &pioB_clk, + .regbase = AT91SAM9263_BASE_PIOB, }, { .id = AT91SAM9263_ID_PIOCDE, - .offset = AT91_PIOC, - .clock = &pioCDE_clk, + .regbase = AT91SAM9263_BASE_PIOC, }, { .id = AT91SAM9263_ID_PIOCDE, - .offset = AT91_PIOD, - .clock = &pioCDE_clk, + .regbase = AT91SAM9263_BASE_PIOD, }, { .id = AT91SAM9263_ID_PIOCDE, - .offset = AT91_PIOE, - .clock = &pioCDE_clk, + .regbase = AT91SAM9263_BASE_PIOE, } }; -static void at91sam9263_poweroff(void) -{ - at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); -} - - /* -------------------------------------------------------------------- * AT91SAM9263 processor initialization * -------------------------------------------------------------------- */ @@ -303,10 +298,17 @@ static void __init at91sam9263_map_io(void) at91_init_sram(1, AT91SAM9263_SRAM1_BASE, AT91SAM9263_SRAM1_SIZE); } +static void __init at91sam9263_ioremap_registers(void) +{ + at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC); + at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT); + at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0); + at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1); +} + static void __init at91sam9263_initialize(void) { - at91_arch_reset = at91sam9_alt_reset; - pm_power_off = at91sam9263_poweroff; + arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); /* Register GPIO subsystem */ @@ -358,6 +360,7 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { struct at91_init_soc __initdata at91sam9263_soc = { .map_io = at91sam9263_map_io, .default_irq_priority = at91sam9263_default_irq_priority, + .ioremap_registers = at91sam9263_ioremap_registers, .register_clocks = at91sam9263_register_clocks, .init = at91sam9263_initialize, }; diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index ad017eb1f8df..7b46b2787022 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -70,7 +70,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable VBus control for UHP ports */ for (i = 0; i < data->ports; i++) { - if (data->vbus_pin[i]) + if (gpio_is_valid(data->vbus_pin[i])) at91_set_gpio_output(data->vbus_pin[i], 0); } @@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { @@ -123,7 +123,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) if (!data) return; - if (data->vbus_pin) { + if (gpio_is_valid(data->vbus_pin)) { at91_set_gpio_input(data->vbus_pin, 0); at91_set_deglitch(data->vbus_pin, 1); } @@ -144,7 +144,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct at91_eth_data eth_data; +static struct macb_platform_data eth_data; static struct resource eth_resources[] = { [0] = { @@ -171,12 +171,12 @@ static struct platform_device at91sam9263_eth_device = { .num_resources = ARRAY_SIZE(eth_resources), }; -void __init at91_add_device_eth(struct at91_eth_data *data) +void __init at91_add_device_eth(struct macb_platform_data *data) { if (!data) return; - if (data->phy_irq_pin) { + if (gpio_is_valid(data->phy_irq_pin)) { at91_set_gpio_input(data->phy_irq_pin, 0); at91_set_deglitch(data->phy_irq_pin, 1); } @@ -208,7 +208,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data) platform_device_register(&at91sam9263_eth_device); } #else -void __init at91_add_device_eth(struct at91_eth_data *data) {} +void __init at91_add_device_eth(struct macb_platform_data *data) {} #endif @@ -276,13 +276,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) return; /* input/irq */ - if (data->det_pin) { + if (gpio_is_valid(data->det_pin)) { at91_set_gpio_input(data->det_pin, 1); at91_set_deglitch(data->det_pin, 1); } - if (data->wp_pin) + if (gpio_is_valid(data->wp_pin)) at91_set_gpio_input(data->wp_pin, 1); - if (data->vcc_pin) + if (gpio_is_valid(data->vcc_pin)) at91_set_gpio_output(data->vcc_pin, 0); if (mmc_id == 0) { /* MCI0 */ @@ -430,17 +430,17 @@ void __init at91_add_device_cf(struct at91_cf_data *data) } at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa); - if (data->det_pin) { + if (gpio_is_valid(data->det_pin)) { at91_set_gpio_input(data->det_pin, 1); at91_set_deglitch(data->det_pin, 1); } - if (data->irq_pin) { + if (gpio_is_valid(data->irq_pin)) { at91_set_gpio_input(data->irq_pin, 1); at91_set_deglitch(data->irq_pin, 1); } - if (data->vcc_pin) + if (gpio_is_valid(data->vcc_pin)) /* initially off */ at91_set_gpio_output(data->vcc_pin, 0); @@ -473,8 +473,8 @@ static struct resource nand_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_BASE_SYS + AT91_ECC0, - .end = AT91_BASE_SYS + AT91_ECC0 + SZ_512 - 1, + .start = AT91SAM9263_BASE_ECC0, + .end = AT91SAM9263_BASE_ECC0 + SZ_512 - 1, .flags = IORESOURCE_MEM, } }; @@ -500,15 +500,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); /* enable pin */ - if (data->enable_pin) + if (gpio_is_valid(data->enable_pin)) at91_set_gpio_output(data->enable_pin, 1); /* ready/busy pin */ - if (data->rdy_pin) + if (gpio_is_valid(data->rdy_pin)) at91_set_gpio_input(data->rdy_pin, 1); /* card detect pin */ - if (data->det_pin) + if (gpio_is_valid(data->det_pin)) at91_set_gpio_input(data->det_pin, 1); nand_data = *data; @@ -749,7 +749,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data) at91_set_A_periph(AT91_PIN_PB3, 0); /* AC97RX */ /* reset */ - if (data->reset_pin) + if (gpio_is_valid(data->reset_pin)) at91_set_gpio_output(data->reset_pin, 0); ac97_data = *data; @@ -956,8 +956,8 @@ static void __init at91_add_device_tc(void) { } static struct resource rtt0_resources[] = { { - .start = AT91_BASE_SYS + AT91_RTT0, - .end = AT91_BASE_SYS + AT91_RTT0 + SZ_16 - 1, + .start = AT91SAM9263_BASE_RTT0, + .end = AT91SAM9263_BASE_RTT0 + SZ_16 - 1, .flags = IORESOURCE_MEM, } }; @@ -971,8 +971,8 @@ static struct platform_device at91sam9263_rtt0_device = { static struct resource rtt1_resources[] = { { - .start = AT91_BASE_SYS + AT91_RTT1, - .end = AT91_BASE_SYS + AT91_RTT1 + SZ_16 - 1, + .start = AT91SAM9263_BASE_RTT1, + .end = AT91SAM9263_BASE_RTT1 + SZ_16 - 1, .flags = IORESOURCE_MEM, } }; @@ -996,10 +996,19 @@ static void __init at91_add_device_rtt(void) * -------------------------------------------------------------------- */ #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) +static struct resource wdt_resources[] = { + { + .start = AT91SAM9263_BASE_WDT, + .end = AT91SAM9263_BASE_WDT + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + static struct platform_device at91sam9263_wdt_device = { .name = "at91_wdt", .id = -1, - .num_resources = 0, + .resource = wdt_resources, + .num_resources = ARRAY_SIZE(wdt_resources), }; static void __init at91_add_device_watchdog(void) @@ -1196,8 +1205,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} static struct resource dbgu_resources[] = { [0] = { - .start = AT91_BASE_SYS + AT91_DBGU, - .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91SAM9263_BASE_DBGU, + .end = AT91SAM9263_BASE_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index 4ba85499fa97..d89ead740a99 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -25,7 +25,17 @@ static u32 pit_cycle; /* write-once */ static u32 pit_cnt; /* access only w/system irq blocked */ +static void __iomem *pit_base_addr __read_mostly; +static inline unsigned int pit_read(unsigned int reg_offset) +{ + return __raw_readl(pit_base_addr + reg_offset); +} + +static inline void pit_write(unsigned int reg_offset, unsigned long value) +{ + __raw_writel(value, pit_base_addr + reg_offset); +} /* * Clocksource: just a monotonic counter of MCK/16 cycles. @@ -39,7 +49,7 @@ static cycle_t read_pit_clk(struct clocksource *cs) raw_local_irq_save(flags); elapsed = pit_cnt; - t = at91_sys_read(AT91_PIT_PIIR); + t = pit_read(AT91_PIT_PIIR); raw_local_irq_restore(flags); elapsed += PIT_PICNT(t) * pit_cycle; @@ -64,8 +74,8 @@ pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) switch (mode) { case CLOCK_EVT_MODE_PERIODIC: /* update clocksource counter */ - pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR)); - at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN + pit_cnt += pit_cycle * PIT_PICNT(pit_read(AT91_PIT_PIVR)); + pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN | AT91_PIT_PITIEN); break; case CLOCK_EVT_MODE_ONESHOT: @@ -74,7 +84,7 @@ pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) case CLOCK_EVT_MODE_SHUTDOWN: case CLOCK_EVT_MODE_UNUSED: /* disable irq, leaving the clocksource active */ - at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); + pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); break; case CLOCK_EVT_MODE_RESUME: break; @@ -103,11 +113,11 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id) /* The PIT interrupt may be disabled, and is shared */ if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC) - && (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS)) { + && (pit_read(AT91_PIT_SR) & AT91_PIT_PITS)) { unsigned nr_ticks; /* Get number of ticks performed before irq, and ack it */ - nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR)); + nr_ticks = PIT_PICNT(pit_read(AT91_PIT_PIVR)); do { pit_cnt += pit_cycle; pit_clkevt.event_handler(&pit_clkevt); @@ -129,14 +139,14 @@ static struct irqaction at91sam926x_pit_irq = { static void at91sam926x_pit_reset(void) { /* Disable timer and irqs */ - at91_sys_write(AT91_PIT_MR, 0); + pit_write(AT91_PIT_MR, 0); /* Clear any pending interrupts, wait for PIT to stop counting */ - while (PIT_CPIV(at91_sys_read(AT91_PIT_PIVR)) != 0) + while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0) cpu_relax(); /* Start PIT but don't enable IRQ */ - at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); + pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); } /* @@ -178,7 +188,15 @@ static void __init at91sam926x_pit_init(void) static void at91sam926x_pit_suspend(void) { /* Disable timer */ - at91_sys_write(AT91_PIT_MR, 0); + pit_write(AT91_PIT_MR, 0); +} + +void __init at91sam926x_ioremap_pit(u32 addr) +{ + pit_base_addr = ioremap(addr, 16); + + if (!pit_base_addr) + panic("Impossible to ioremap PIT\n"); } struct sys_timer at91sam926x_timer = { diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S index e0256deb91fb..d3f931c5942e 100644 --- a/arch/arm/mach-at91/at91sam9_alt_reset.S +++ b/arch/arm/mach-at91/at91sam9_alt_reset.S @@ -14,20 +14,15 @@ */ #include <linux/linkage.h> -#include <asm/system.h> #include <mach/hardware.h> #include <mach/at91sam9_sdramc.h> #include <mach/at91_rstc.h> .arm - .globl at91sam9_alt_reset + .globl at91sam9_alt_restart -at91sam9_alt_reset: mrc p15, 0, r0, c1, c0, 0 - orr r0, r0, #CR_I - mcr p15, 0, r0, c1, c0, 0 @ enable I-cache - - ldr r0, .at91_va_base_sdramc @ preload constants +at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants ldr r1, .at91_va_base_rstc_cr mov r2, #1 diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 318b0407ea04..7032dd32cdf0 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -11,7 +11,6 @@ */ #include <linux/module.h> -#include <linux/pm.h> #include <linux/dma-mapping.h> #include <asm/irq.h> @@ -20,12 +19,12 @@ #include <mach/at91sam9g45.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> -#include <mach/at91_shdwc.h> #include <mach/cpu.h> #include "soc.h" #include "generic.h" #include "clock.h" +#include "sam9_smc.h" /* -------------------------------------------------------------------- * Clocks @@ -150,7 +149,7 @@ static struct clk ac97_clk = { .type = CLK_TYPE_PERIPHERAL, }; static struct clk macb_clk = { - .name = "macb_clk", + .name = "pclk", .pmc_mask = 1 << AT91SAM9G45_ID_EMAC, .type = CLK_TYPE_PERIPHERAL, }; @@ -209,6 +208,8 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { + /* One additional fake clock for macb_hclk */ + CLKDEV_CON_ID("hclk", &macb_clk), /* One additional fake clock for ohci */ CLKDEV_CON_ID("ohci_clk", &uhphs_clk), CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk), @@ -231,6 +232,11 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), + CLKDEV_CON_ID("pioA", &pioA_clk), + CLKDEV_CON_ID("pioB", &pioB_clk), + CLKDEV_CON_ID("pioC", &pioC_clk), + CLKDEV_CON_ID("pioD", &pioDE_clk), + CLKDEV_CON_ID("pioE", &pioDE_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -293,41 +299,30 @@ void __init at91sam9g45_set_console_clock(int id) * GPIO * -------------------------------------------------------------------- */ -static struct at91_gpio_bank at91sam9g45_gpio[] = { +static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = { { .id = AT91SAM9G45_ID_PIOA, - .offset = AT91_PIOA, - .clock = &pioA_clk, + .regbase = AT91SAM9G45_BASE_PIOA, }, { .id = AT91SAM9G45_ID_PIOB, - .offset = AT91_PIOB, - .clock = &pioB_clk, + .regbase = AT91SAM9G45_BASE_PIOB, }, { .id = AT91SAM9G45_ID_PIOC, - .offset = AT91_PIOC, - .clock = &pioC_clk, + .regbase = AT91SAM9G45_BASE_PIOC, }, { .id = AT91SAM9G45_ID_PIODE, - .offset = AT91_PIOD, - .clock = &pioDE_clk, + .regbase = AT91SAM9G45_BASE_PIOD, }, { .id = AT91SAM9G45_ID_PIODE, - .offset = AT91_PIOE, - .clock = &pioDE_clk, + .regbase = AT91SAM9G45_BASE_PIOE, } }; -static void at91sam9g45_reset(void) +static void at91sam9g45_restart(char mode, const char *cmd) { at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } -static void at91sam9g45_poweroff(void) -{ - at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); -} - - /* -------------------------------------------------------------------- * AT91SAM9G45 processor initialization * -------------------------------------------------------------------- */ @@ -338,10 +333,16 @@ static void __init at91sam9g45_map_io(void) init_consistent_dma_size(SZ_4M); } +static void __init at91sam9g45_ioremap_registers(void) +{ + at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC); + at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT); + at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC); +} + static void __init at91sam9g45_initialize(void) { - at91_arch_reset = at91sam9g45_reset; - pm_power_off = at91sam9g45_poweroff; + arm_pm_restart = at91sam9g45_restart; at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); /* Register GPIO subsystem */ @@ -393,6 +394,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { struct at91_init_soc __initdata at91sam9g45_soc = { .map_io = at91sam9g45_map_io, .default_irq_priority = at91sam9g45_default_irq_priority, + .ioremap_registers = at91sam9g45_ioremap_registers, .register_clocks = at91sam9g45_register_clocks, .init = at91sam9g45_initialize, }; diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 09a16d6bd5cd..b7582dd10dc3 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -44,8 +44,8 @@ static struct at_dma_platform_data atdma_pdata = { static struct resource hdmac_resources[] = { [0] = { - .start = AT91_BASE_SYS + AT91_DMA, - .end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1, + .start = AT91SAM9G45_BASE_DMA, + .end = AT91SAM9G45_BASE_DMA + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -120,7 +120,7 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) /* Enable VBus control for UHP ports */ for (i = 0; i < data->ports; i++) { - if (data->vbus_pin[i]) + if (gpio_is_valid(data->vbus_pin[i])) at91_set_gpio_output(data->vbus_pin[i], 0); } @@ -181,7 +181,7 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) /* Enable VBus control for UHP ports */ for (i = 0; i < data->ports; i++) { - if (data->vbus_pin[i]) + if (gpio_is_valid(data->vbus_pin[i])) at91_set_gpio_output(data->vbus_pin[i], 0); } @@ -263,7 +263,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data) usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep); memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep)); - if (data && data->vbus_pin > 0) { + if (data && gpio_is_valid(data->vbus_pin)) { at91_set_gpio_input(data->vbus_pin, 0); at91_set_deglitch(data->vbus_pin, 1); usba_udc_data.pdata.vbus_pin = data->vbus_pin; @@ -284,7 +284,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {} #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct at91_eth_data eth_data; +static struct macb_platform_data eth_data; static struct resource eth_resources[] = { [0] = { @@ -311,12 +311,12 @@ static struct platform_device at91sam9g45_eth_device = { .num_resources = ARRAY_SIZE(eth_resources), }; -void __init at91_add_device_eth(struct at91_eth_data *data) +void __init at91_add_device_eth(struct macb_platform_data *data) { if (!data) return; - if (data->phy_irq_pin) { + if (gpio_is_valid(data->phy_irq_pin)) { at91_set_gpio_input(data->phy_irq_pin, 0); at91_set_deglitch(data->phy_irq_pin, 1); } @@ -348,7 +348,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data) platform_device_register(&at91sam9g45_eth_device); } #else -void __init at91_add_device_eth(struct at91_eth_data *data) {} +void __init at91_add_device_eth(struct macb_platform_data *data) {} #endif @@ -449,11 +449,11 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) /* input/irq */ - if (data->slot[0].detect_pin) { + if (gpio_is_valid(data->slot[0].detect_pin)) { at91_set_gpio_input(data->slot[0].detect_pin, 1); at91_set_deglitch(data->slot[0].detect_pin, 1); } - if (data->slot[0].wp_pin) + if (gpio_is_valid(data->slot[0].wp_pin)) at91_set_gpio_input(data->slot[0].wp_pin, 1); if (mmc_id == 0) { /* MCI0 */ @@ -529,8 +529,8 @@ static struct resource nand_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_BASE_SYS + AT91_ECC, - .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1, + .start = AT91SAM9G45_BASE_ECC, + .end = AT91SAM9G45_BASE_ECC + SZ_512 - 1, .flags = IORESOURCE_MEM, } }; @@ -556,15 +556,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); /* enable pin */ - if (data->enable_pin) + if (gpio_is_valid(data->enable_pin)) at91_set_gpio_output(data->enable_pin, 1); /* ready/busy pin */ - if (data->rdy_pin) + if (gpio_is_valid(data->rdy_pin)) at91_set_gpio_input(data->rdy_pin, 1); /* card detect pin */ - if (data->det_pin) + if (gpio_is_valid(data->det_pin)) at91_set_gpio_input(data->det_pin, 1); nand_data = *data; @@ -859,7 +859,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data) at91_set_A_periph(AT91_PIN_PD6, 0); /* AC97RX */ /* reset */ - if (data->reset_pin) + if (gpio_is_valid(data->reset_pin)) at91_set_gpio_output(data->reset_pin, 0); ac97_data = *data; @@ -1009,10 +1009,24 @@ static void __init at91_add_device_tc(void) { } * -------------------------------------------------------------------- */ #if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE) +static struct resource rtc_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_RTC, + .end = AT91SAM9G45_BASE_RTC + SZ_256 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_ID_SYS, + .end = AT91_ID_SYS, + .flags = IORESOURCE_IRQ, + }, +}; + static struct platform_device at91sam9g45_rtc_device = { .name = "at91_rtc", .id = -1, - .num_resources = 0, + .resource = rtc_resources, + .num_resources = ARRAY_SIZE(rtc_resources), }; static void __init at91_add_device_rtc(void) @@ -1081,8 +1095,8 @@ void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {} static struct resource rtt_resources[] = { { - .start = AT91_BASE_SYS + AT91_RTT, - .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, + .start = AT91SAM9G45_BASE_RTT, + .end = AT91SAM9G45_BASE_RTT + SZ_16 - 1, .flags = IORESOURCE_MEM, } }; @@ -1133,10 +1147,19 @@ static void __init at91_add_device_trng(void) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) +static struct resource wdt_resources[] = { + { + .start = AT91SAM9G45_BASE_WDT, + .end = AT91SAM9G45_BASE_WDT + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + static struct platform_device at91sam9g45_wdt_device = { .name = "at91_wdt", .id = -1, - .num_resources = 0, + .resource = wdt_resources, + .num_resources = ARRAY_SIZE(wdt_resources), }; static void __init at91_add_device_watchdog(void) @@ -1332,8 +1355,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_BASE_SYS + AT91_DBGU, - .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91SAM9G45_BASE_DBGU, + .end = AT91SAM9G45_BASE_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index a238105d2c11..d6bcb1da11df 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -10,7 +10,6 @@ */ #include <linux/module.h> -#include <linux/pm.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -20,11 +19,11 @@ #include <mach/at91sam9rl.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> -#include <mach/at91_shdwc.h> #include "soc.h" #include "generic.h" #include "clock.h" +#include "sam9_smc.h" /* -------------------------------------------------------------------- * Clocks @@ -184,6 +183,10 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_ID("pioA", &pioA_clk), + CLKDEV_CON_ID("pioB", &pioB_clk), + CLKDEV_CON_ID("pioC", &pioC_clk), + CLKDEV_CON_ID("pioD", &pioD_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -243,32 +246,22 @@ void __init at91sam9rl_set_console_clock(int id) * GPIO * -------------------------------------------------------------------- */ -static struct at91_gpio_bank at91sam9rl_gpio[] = { +static struct at91_gpio_bank at91sam9rl_gpio[] __initdata = { { .id = AT91SAM9RL_ID_PIOA, - .offset = AT91_PIOA, - .clock = &pioA_clk, + .regbase = AT91SAM9RL_BASE_PIOA, }, { .id = AT91SAM9RL_ID_PIOB, - .offset = AT91_PIOB, - .clock = &pioB_clk, + .regbase = AT91SAM9RL_BASE_PIOB, }, { .id = AT91SAM9RL_ID_PIOC, - .offset = AT91_PIOC, - .clock = &pioC_clk, + .regbase = AT91SAM9RL_BASE_PIOC, }, { .id = AT91SAM9RL_ID_PIOD, - .offset = AT91_PIOD, - .clock = &pioD_clk, + .regbase = AT91SAM9RL_BASE_PIOD, } }; -static void at91sam9rl_poweroff(void) -{ - at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); -} - - /* -------------------------------------------------------------------- * AT91SAM9RL processor initialization * -------------------------------------------------------------------- */ @@ -290,10 +283,16 @@ static void __init at91sam9rl_map_io(void) at91_init_sram(0, AT91SAM9RL_SRAM_BASE, sram_size); } +static void __init at91sam9rl_ioremap_registers(void) +{ + at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC); + at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT); + at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC); +} + static void __init at91sam9rl_initialize(void) { - at91_arch_reset = at91sam9_alt_reset; - pm_power_off = at91sam9rl_poweroff; + arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); /* Register GPIO subsystem */ @@ -345,6 +344,7 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { struct at91_init_soc __initdata at91sam9rl_soc = { .map_io = at91sam9rl_map_io, .default_irq_priority = at91sam9rl_default_irq_priority, + .ioremap_registers = at91sam9rl_ioremap_registers, .register_clocks = at91sam9rl_register_clocks, .init = at91sam9rl_initialize, }; diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 628eb566d60c..61908dce9784 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -39,8 +39,8 @@ static struct at_dma_platform_data atdma_pdata = { static struct resource hdmac_resources[] = { [0] = { - .start = AT91_BASE_SYS + AT91_DMA, - .end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1, + .start = AT91SAM9RL_BASE_DMA, + .end = AT91SAM9RL_BASE_DMA + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [2] = { @@ -147,7 +147,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data) usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep); memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep)); - if (data && data->vbus_pin > 0) { + if (data && gpio_is_valid(data->vbus_pin)) { at91_set_gpio_input(data->vbus_pin, 0); at91_set_deglitch(data->vbus_pin, 1); usba_udc_data.pdata.vbus_pin = data->vbus_pin; @@ -201,13 +201,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) return; /* input/irq */ - if (data->det_pin) { + if (gpio_is_valid(data->det_pin)) { at91_set_gpio_input(data->det_pin, 1); at91_set_deglitch(data->det_pin, 1); } - if (data->wp_pin) + if (gpio_is_valid(data->wp_pin)) at91_set_gpio_input(data->wp_pin, 1); - if (data->vcc_pin) + if (gpio_is_valid(data->vcc_pin)) at91_set_gpio_output(data->vcc_pin, 0); /* CLK */ @@ -248,8 +248,8 @@ static struct resource nand_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_BASE_SYS + AT91_ECC, - .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1, + .start = AT91SAM9RL_BASE_ECC, + .end = AT91SAM9RL_BASE_ECC + SZ_512 - 1, .flags = IORESOURCE_MEM, } }; @@ -275,15 +275,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* enable pin */ - if (data->enable_pin) + if (gpio_is_valid(data->enable_pin)) at91_set_gpio_output(data->enable_pin, 1); /* ready/busy pin */ - if (data->rdy_pin) + if (gpio_is_valid(data->rdy_pin)) at91_set_gpio_input(data->rdy_pin, 1); /* card detect pin */ - if (data->det_pin) + if (gpio_is_valid(data->det_pin)) at91_set_gpio_input(data->det_pin, 1); at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */ @@ -483,7 +483,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data) at91_set_A_periph(AT91_PIN_PD4, 0); /* AC97RX */ /* reset */ - if (data->reset_pin) + if (gpio_is_valid(data->reset_pin)) at91_set_gpio_output(data->reset_pin, 0); ac97_data = *data; @@ -685,8 +685,8 @@ static void __init at91_add_device_rtc(void) {} static struct resource rtt_resources[] = { { - .start = AT91_BASE_SYS + AT91_RTT, - .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, + .start = AT91SAM9RL_BASE_RTT, + .end = AT91SAM9RL_BASE_RTT + SZ_16 - 1, .flags = IORESOURCE_MEM, } }; @@ -709,10 +709,19 @@ static void __init at91_add_device_rtt(void) * -------------------------------------------------------------------- */ #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) +static struct resource wdt_resources[] = { + { + .start = AT91SAM9RL_BASE_WDT, + .end = AT91SAM9RL_BASE_WDT + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + static struct platform_device at91sam9rl_wdt_device = { .name = "at91_wdt", .id = -1, - .num_resources = 0, + .resource = wdt_resources, + .num_resources = ARRAY_SIZE(wdt_resources), }; static void __init at91_add_device_watchdog(void) @@ -908,8 +917,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_BASE_SYS + AT91_DBGU, - .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91SAM9RL_BASE_DBGU, + .end = AT91SAM9RL_BASE_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 367d5cd5e362..2628384aaae1 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -63,13 +63,15 @@ static void __init onearm_init_early(void) at91_set_serial_console(0); } -static struct at91_eth_data __initdata onearm_eth_data = { +static struct macb_platform_data __initdata onearm_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, }; static struct at91_usbh_data __initdata onearm_usbh_data = { .ports = 1, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; static struct at91_udc_data __initdata onearm_udc_data = { diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index 4282d96dffa8..3bb40694b02d 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -75,6 +75,8 @@ static void __init afeb9260_init_early(void) */ static struct at91_usbh_data __initdata afeb9260_usbh_data = { .ports = 1, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; /* @@ -82,7 +84,7 @@ static struct at91_usbh_data __initdata afeb9260_usbh_data = { */ static struct at91_udc_data __initdata afeb9260_udc_data = { .vbus_pin = AT91_PIN_PC5, - .pullup_pin = 0, /* pull-up driven by UDC */ + .pullup_pin = -EINVAL, /* pull-up driven by UDC */ }; @@ -103,7 +105,7 @@ static struct spi_board_info afeb9260_spi_devices[] = { /* * MACB Ethernet device */ -static struct at91_eth_data __initdata afeb9260_macb_data = { +static struct macb_platform_data __initdata afeb9260_macb_data = { .phy_irq_pin = AT91_PIN_PA9, .is_rmii = 0, }; @@ -138,6 +140,7 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = { .bus_width_16 = 0, .parts = afeb9260_nand_partition, .num_parts = ARRAY_SIZE(afeb9260_nand_partition), + .det_pin = -EINVAL, }; @@ -149,6 +152,7 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = { .wp_pin = AT91_PIN_PC4, .slot_b = 1, .wire4 = 1, + .vcc_pin = -EINVAL, }; @@ -169,6 +173,8 @@ static struct i2c_board_info __initdata afeb9260_i2c_devices[] = { static struct at91_cf_data afeb9260_cf_data = { .chipselect = 4, .irq_pin = AT91_PIN_PA6, + .det_pin = -EINVAL, + .vcc_pin = -EINVAL, .rst_pin = AT91_PIN_PA7, .flags = AT91_CF_TRUE_IDE, }; diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index f90cfb32bad2..8510e9e54988 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -62,6 +62,8 @@ static void __init cam60_init_early(void) */ static struct at91_usbh_data __initdata cam60_usbh_data = { .ports = 1, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; @@ -115,7 +117,7 @@ static struct spi_board_info cam60_spi_devices[] __initdata = { /* * MACB Ethernet device */ -static struct __initdata at91_eth_data cam60_macb_data = { +static struct __initdata macb_platform_data cam60_macb_data = { .phy_irq_pin = AT91_PIN_PB5, .is_rmii = 0, }; @@ -135,7 +137,7 @@ static struct mtd_partition __initdata cam60_nand_partition[] = { static struct atmel_nand_data __initdata cam60_nand_data = { .ale = 21, .cle = 22, - // .det_pin = ... not there + .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PA9, .enable_pin = AT91_PIN_PA7, .parts = cam60_nand_partition, @@ -163,7 +165,7 @@ static struct sam9_smc_config __initdata cam60_nand_smc_config = { static void __init cam60_add_device_nand(void) { /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &cam60_nand_smc_config); + sam9_smc_configure(0, 3, &cam60_nand_smc_config); at91_add_device_nand(&cam60_nand_data); } diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 5dffd3be62d2..ac3de4f7c31d 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -70,6 +70,8 @@ static void __init cap9adk_init_early(void) */ static struct at91_usbh_data __initdata cap9adk_usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; /* @@ -144,16 +146,17 @@ static struct spi_board_info cap9adk_spi_devices[] = { */ static struct at91_mmc_data __initdata cap9adk_mmc_data = { .wire4 = 1, -// .det_pin = ... not connected -// .wp_pin = ... not connected -// .vcc_pin = ... not connected + .det_pin = -EINVAL, + .wp_pin = -EINVAL, + .vcc_pin = -EINVAL, }; /* * MACB Ethernet device */ -static struct at91_eth_data __initdata cap9adk_macb_data = { +static struct macb_platform_data __initdata cap9adk_macb_data = { + .phy_irq_pin = -EINVAL, .is_rmii = 1, }; @@ -172,8 +175,8 @@ static struct mtd_partition __initdata cap9adk_nand_partitions[] = { static struct atmel_nand_data __initdata cap9adk_nand_data = { .ale = 21, .cle = 22, -// .det_pin = ... not connected -// .rdy_pin = ... not connected + .det_pin = -EINVAL, + .rdy_pin = -EINVAL, .enable_pin = AT91_PIN_PD15, .parts = cap9adk_nand_partitions, .num_parts = ARRAY_SIZE(cap9adk_nand_partitions), @@ -212,7 +215,7 @@ static void __init cap9adk_add_device_nand(void) cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_8; /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &cap9adk_nand_smc_config); + sam9_smc_configure(0, 3, &cap9adk_nand_smc_config); at91_add_device_nand(&cap9adk_nand_data); } @@ -282,7 +285,7 @@ static __init void cap9adk_add_device_nor(void) at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); /* configure chip-select 0 (NOR) */ - sam9_smc_configure(0, &cap9adk_nor_smc_config); + sam9_smc_configure(0, 0, &cap9adk_nor_smc_config); platform_device_register(&cap9adk_nor_flash); } @@ -351,7 +354,7 @@ static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data; * AC97 */ static struct ac97c_platform_data cap9adk_ac97_data = { -// .reset_pin = ... not connected + .reset_pin = -EINVAL, }; diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 774c87fcbd5b..59d9cf997537 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -57,13 +57,15 @@ static void __init carmeva_init_early(void) at91_set_serial_console(0); } -static struct at91_eth_data __initdata carmeva_eth_data = { +static struct macb_platform_data __initdata carmeva_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, }; static struct at91_usbh_data __initdata carmeva_usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; static struct at91_udc_data __initdata carmeva_udc_data = { @@ -75,8 +77,8 @@ static struct at91_udc_data __initdata carmeva_udc_data = { // static struct at91_cf_data __initdata carmeva_cf_data = { // .det_pin = AT91_PIN_PB0, // .rst_pin = AT91_PIN_PC5, - // .irq_pin = ... not connected - // .vcc_pin = ... always powered + // .irq_pin = -EINVAL, + // .vcc_pin = -EINVAL, // }; static struct at91_mmc_data __initdata carmeva_mmc_data = { @@ -84,6 +86,7 @@ static struct at91_mmc_data __initdata carmeva_mmc_data = { .wire4 = 1, .det_pin = AT91_PIN_PB10, .wp_pin = AT91_PIN_PC14, + .vcc_pin = -EINVAL, }; static struct spi_board_info carmeva_spi_devices[] = { diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index fc885a4ce243..9ab3d1ea326d 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -86,6 +86,8 @@ static void __init cpu9krea_init_early(void) */ static struct at91_usbh_data __initdata cpu9krea_usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; /* @@ -93,13 +95,14 @@ static struct at91_usbh_data __initdata cpu9krea_usbh_data = { */ static struct at91_udc_data __initdata cpu9krea_udc_data = { .vbus_pin = AT91_PIN_PC8, - .pullup_pin = 0, /* pull-up driven by UDC */ + .pullup_pin = -EINVAL, /* pull-up driven by UDC */ }; /* * MACB Ethernet device */ -static struct at91_eth_data __initdata cpu9krea_macb_data = { +static struct macb_platform_data __initdata cpu9krea_macb_data = { + .phy_irq_pin = -EINVAL, .is_rmii = 1, }; @@ -112,6 +115,7 @@ static struct atmel_nand_data __initdata cpu9krea_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .bus_width_16 = 0, + .det_pin = -EINVAL, }; #ifdef CONFIG_MACH_CPU9260 @@ -156,7 +160,7 @@ static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = { static void __init cpu9krea_add_device_nand(void) { - sam9_smc_configure(3, &cpu9krea_nand_smc_config); + sam9_smc_configure(0, 3, &cpu9krea_nand_smc_config); at91_add_device_nand(&cpu9krea_nand_data); } @@ -238,7 +242,7 @@ static __init void cpu9krea_add_device_nor(void) at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V); /* configure chip-select 0 (NOR) */ - sam9_smc_configure(0, &cpu9krea_nor_smc_config); + sam9_smc_configure(0, 0, &cpu9krea_nor_smc_config); platform_device_register(&cpu9krea_nor_flash); } @@ -337,6 +341,8 @@ static struct at91_mmc_data __initdata cpu9krea_mmc_data = { .slot_b = 0, .wire4 = 1, .det_pin = AT91_PIN_PA29, + .wp_pin = -EINVAL, + .vcc_pin = -EINVAL, }; static void __init cpu9krea_board_init(void) diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index d35e65b08ccd..368e1427ad99 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -82,12 +82,15 @@ static void __init cpuat91_init_early(void) at91_set_serial_console(0); } -static struct at91_eth_data __initdata cpuat91_eth_data = { +static struct macb_platform_data __initdata cpuat91_eth_data = { + .phy_irq_pin = -EINVAL, .is_rmii = 1, }; static struct at91_usbh_data __initdata cpuat91_usbh_data = { .ports = 1, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; static struct at91_udc_data __initdata cpuat91_udc_data = { @@ -98,6 +101,8 @@ static struct at91_udc_data __initdata cpuat91_udc_data = { static struct at91_mmc_data __initdata cpuat91_mmc_data = { .det_pin = AT91_PIN_PC2, .wire4 = 1, + .wp_pin = -EINVAL, + .vcc_pin = -EINVAL, }; static struct physmap_flash_data cpuat91_flash_data = { diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index c3936665e645..1a1547b1ce4e 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -58,18 +58,20 @@ static void __init csb337_init_early(void) at91_set_serial_console(0); } -static struct at91_eth_data __initdata csb337_eth_data = { +static struct macb_platform_data __initdata csb337_eth_data = { .phy_irq_pin = AT91_PIN_PC2, .is_rmii = 0, }; static struct at91_usbh_data __initdata csb337_usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; static struct at91_udc_data __initdata csb337_udc_data = { - // this has no VBUS sensing pin .pullup_pin = AT91_PIN_PA24, + .vbus_pin = -EINVAL, }; static struct i2c_board_info __initdata csb337_i2c_devices[] = { @@ -98,6 +100,7 @@ static struct at91_mmc_data __initdata csb337_mmc_data = { .slot_b = 0, .wire4 = 1, .wp_pin = AT91_PIN_PD6, + .vcc_pin = -EINVAL, }; static struct spi_board_info csb337_spi_devices[] = { diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 586100e2acbb..f650bf39455d 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -52,13 +52,15 @@ static void __init csb637_init_early(void) at91_set_serial_console(0); } -static struct at91_eth_data __initdata csb637_eth_data = { +static struct macb_platform_data __initdata csb637_eth_data = { .phy_irq_pin = AT91_PIN_PC0, .is_rmii = 0, }; static struct at91_usbh_data __initdata csb637_usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; static struct at91_udc_data __initdata csb637_udc_data = { diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c index 0b7d32778210..bb6b434ec0c1 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt.c @@ -50,6 +50,7 @@ static void __init ek_init_early(void) static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, + .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC8, .enable_pin = AT91_PIN_PC14, }; @@ -82,7 +83,7 @@ static void __init ek_add_device_nand(void) ek_nand_smc_config.mode |= AT91_SMC_DBW_8; /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &ek_nand_smc_config); + sam9_smc_configure(0, 3, &ek_nand_smc_config); at91_add_device_nand(&ek_nand_data); } diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 45db7a3dbef0..d302ca3eeb64 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -60,13 +60,15 @@ static void __init eb9200_init_early(void) at91_set_serial_console(0); } -static struct at91_eth_data __initdata eb9200_eth_data = { +static struct macb_platform_data __initdata eb9200_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, }; static struct at91_usbh_data __initdata eb9200_usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; static struct at91_udc_data __initdata eb9200_udc_data = { @@ -75,15 +77,18 @@ static struct at91_udc_data __initdata eb9200_udc_data = { }; static struct at91_cf_data __initdata eb9200_cf_data = { + .irq_pin = -EINVAL, .det_pin = AT91_PIN_PB0, + .vcc_pin = -EINVAL, .rst_pin = AT91_PIN_PC5, - // .irq_pin = ... not connected - // .vcc_pin = ... always powered }; static struct at91_mmc_data __initdata eb9200_mmc_data = { .slot_b = 0, .wire4 = 1, + .det_pin = -EINVAL, + .wp_pin = -EINVAL, + .vcc_pin = -EINVAL, }; static struct i2c_board_info __initdata eb9200_i2c_devices[] = { diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 2f9c16d29212..69966ce4d776 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -64,18 +64,23 @@ static void __init ecb_at91init_early(void) at91_set_serial_console(0); } -static struct at91_eth_data __initdata ecb_at91eth_data = { +static struct macb_platform_data __initdata ecb_at91eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 0, }; static struct at91_usbh_data __initdata ecb_at91usbh_data = { .ports = 1, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; static struct at91_mmc_data __initdata ecb_at91mmc_data = { .slot_b = 0, .wire4 = 1, + .det_pin = -EINVAL, + .wp_pin = -EINVAL, + .vcc_pin = -EINVAL, }; diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 8252c722607b..07ef35b0ec2c 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -47,13 +47,15 @@ static void __init eco920_init_early(void) at91_set_serial_console(0); } -static struct at91_eth_data __initdata eco920_eth_data = { +static struct macb_platform_data __initdata eco920_eth_data = { .phy_irq_pin = AT91_PIN_PC2, .is_rmii = 1, }; static struct at91_usbh_data __initdata eco920_usbh_data = { .ports = 1, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; static struct at91_udc_data __initdata eco920_udc_data = { @@ -64,6 +66,9 @@ static struct at91_udc_data __initdata eco920_udc_data = { static struct at91_mmc_data __initdata eco920_mmc_data = { .slot_b = 0, .wire4 = 0, + .det_pin = -EINVAL, + .wp_pin = -EINVAL, + .vcc_pin = -EINVAL, }; static struct physmap_flash_data eco920_flash_data = { diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 4c3f65d9c59b..eec02cd57ced 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -52,12 +52,14 @@ static void __init flexibity_init_early(void) /* USB Host port */ static struct at91_usbh_data __initdata flexibity_usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; /* USB Device port */ static struct at91_udc_data __initdata flexibity_udc_data = { .vbus_pin = AT91_PIN_PC5, - .pullup_pin = 0, /* pull-up driven by UDC */ + .pullup_pin = -EINVAL, /* pull-up driven by UDC */ }; /* SPI devices */ @@ -76,6 +78,7 @@ static struct at91_mmc_data __initdata flexibity_mmc_data = { .wire4 = 1, .det_pin = AT91_PIN_PC9, .wp_pin = AT91_PIN_PC4, + .vcc_pin = -EINVAL, }; /* LEDs */ diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index f27d1a780cfa..caf017f0f4ee 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -106,6 +106,8 @@ static void __init foxg20_init_early(void) */ static struct at91_usbh_data __initdata foxg20_usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; /* @@ -113,7 +115,7 @@ static struct at91_usbh_data __initdata foxg20_usbh_data = { */ static struct at91_udc_data __initdata foxg20_udc_data = { .vbus_pin = AT91_PIN_PC6, - .pullup_pin = 0, /* pull-up driven by UDC */ + .pullup_pin = -EINVAL, /* pull-up driven by UDC */ }; @@ -135,7 +137,7 @@ static struct spi_board_info foxg20_spi_devices[] = { /* * MACB Ethernet device */ -static struct at91_eth_data __initdata foxg20_macb_data = { +static struct macb_platform_data __initdata foxg20_macb_data = { .phy_irq_pin = AT91_PIN_PA7, .is_rmii = 1, }; @@ -147,6 +149,9 @@ static struct at91_eth_data __initdata foxg20_macb_data = { static struct at91_mmc_data __initdata foxg20_mmc_data = { .slot_b = 1, .wire4 = 1, + .det_pin = -EINVAL, + .wp_pin = -EINVAL, + .vcc_pin = -EINVAL, }; diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index 2e95949737e6..230e71969fb7 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -80,6 +80,8 @@ static void __init gsia18s_init_early(void) */ static struct at91_usbh_data __initdata usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; /* @@ -87,13 +89,13 @@ static struct at91_usbh_data __initdata usbh_data = { */ static struct at91_udc_data __initdata udc_data = { .vbus_pin = AT91_PIN_PA22, - .pullup_pin = 0, /* pull-up driven by UDC */ + .pullup_pin = -EINVAL, /* pull-up driven by UDC */ }; /* * MACB Ethernet device */ -static struct at91_eth_data __initdata macb_data = { +static struct macb_platform_data __initdata macb_data = { .phy_irq_pin = AT91_PIN_PA28, .is_rmii = 1, }; @@ -530,6 +532,7 @@ static struct i2c_board_info __initdata gsia18s_i2c_devices[] = { static struct at91_cf_data __initdata gsia18s_cf1_data = { .irq_pin = AT91_PIN_PA27, .det_pin = AT91_PIN_PB30, + .vcc_pin = -EINVAL, .rst_pin = AT91_PIN_PB31, .chipselect = 5, .flags = AT91_CF_TRUE_IDE, diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 3bae73e63633..efde1b2327c8 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -61,13 +61,15 @@ static void __init kafa_init_early(void) at91_set_serial_console(0); } -static struct at91_eth_data __initdata kafa_eth_data = { +static struct macb_platform_data __initdata kafa_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 0, }; static struct at91_usbh_data __initdata kafa_usbh_data = { .ports = 1, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; static struct at91_udc_data __initdata kafa_udc_data = { diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index e61351ffad50..d75a4a2ad9c2 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -69,13 +69,15 @@ static void __init kb9202_init_early(void) at91_set_serial_console(0); } -static struct at91_eth_data __initdata kb9202_eth_data = { +static struct macb_platform_data __initdata kb9202_eth_data = { .phy_irq_pin = AT91_PIN_PB29, .is_rmii = 0, }; static struct at91_usbh_data __initdata kb9202_usbh_data = { .ports = 1, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; static struct at91_udc_data __initdata kb9202_udc_data = { @@ -87,6 +89,8 @@ static struct at91_mmc_data __initdata kb9202_mmc_data = { .det_pin = AT91_PIN_PB2, .slot_b = 0, .wire4 = 1, + .wp_pin = -EINVAL, + .vcc_pin = -EINVAL, }; static struct mtd_partition __initdata kb9202_nand_partition[] = { @@ -100,7 +104,7 @@ static struct mtd_partition __initdata kb9202_nand_partition[] = { static struct atmel_nand_data __initdata kb9202_nand_data = { .ale = 22, .cle = 21, - // .det_pin = ... not there + .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC29, .enable_pin = AT91_PIN_PC28, .parts = kb9202_nand_partition, diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index ef816c17dc61..3f8617c0e04e 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -72,6 +72,7 @@ static void __init neocore926_init_early(void) static struct at91_usbh_data __initdata neocore926_usbh_data = { .ports = 2, .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 }, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; /* @@ -79,7 +80,7 @@ static struct at91_usbh_data __initdata neocore926_usbh_data = { */ static struct at91_udc_data __initdata neocore926_udc_data = { .vbus_pin = AT91_PIN_PA25, - .pullup_pin = 0, /* pull-up driven by UDC */ + .pullup_pin = -EINVAL, /* pull-up driven by UDC */ }; @@ -149,13 +150,14 @@ static struct at91_mmc_data __initdata neocore926_mmc_data = { .wire4 = 1, .det_pin = AT91_PIN_PE18, .wp_pin = AT91_PIN_PE19, + .vcc_pin = -EINVAL, }; /* * MACB Ethernet device */ -static struct at91_eth_data __initdata neocore926_macb_data = { +static struct macb_platform_data __initdata neocore926_macb_data = { .phy_irq_pin = AT91_PIN_PE31, .is_rmii = 1, }; @@ -190,6 +192,7 @@ static struct atmel_nand_data __initdata neocore926_nand_data = { .enable_pin = AT91_PIN_PD15, .parts = neocore926_nand_partition, .num_parts = ARRAY_SIZE(neocore926_nand_partition), + .det_pin = -EINVAL, }; static struct sam9_smc_config __initdata neocore926_nand_smc_config = { @@ -213,7 +216,7 @@ static struct sam9_smc_config __initdata neocore926_nand_smc_config = { static void __init neocore926_add_device_nand(void) { /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &neocore926_nand_smc_config); + sam9_smc_configure(0, 3, &neocore926_nand_smc_config); at91_add_device_nand(&neocore926_nand_data); } diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 49e3f699b48e..b4a12fc184c8 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -96,9 +96,9 @@ static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { { static void __init add_device_pcontrol(void) { /* configure chip-select 4 (IO compatible to 8051 X4 ) */ - sam9_smc_configure(4, &pcontrol_smc_config[0]); + sam9_smc_configure(0, 4, &pcontrol_smc_config[0]); /* configure chip-select 7 (FerroRAM 256KiBx16bit MR2A16A D4 ) */ - sam9_smc_configure(7, &pcontrol_smc_config[1]); + sam9_smc_configure(0, 7, &pcontrol_smc_config[1]); } @@ -107,6 +107,8 @@ static void __init add_device_pcontrol(void) */ static struct at91_usbh_data __initdata usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; @@ -122,7 +124,7 @@ static struct at91_udc_data __initdata pcontrol_g20_udc_data = { /* * MACB Ethernet device */ -static struct at91_eth_data __initdata macb_data = { +static struct macb_platform_data __initdata macb_data = { .phy_irq_pin = AT91_PIN_PA28, .is_rmii = 1, }; diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 0a8fe6a1b7c8..ab024fa11d5c 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -60,13 +60,15 @@ static void __init picotux200_init_early(void) at91_set_serial_console(0); } -static struct at91_eth_data __initdata picotux200_eth_data = { +static struct macb_platform_data __initdata picotux200_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, }; static struct at91_usbh_data __initdata picotux200_usbh_data = { .ports = 1, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; static struct at91_mmc_data __initdata picotux200_mmc_data = { @@ -74,6 +76,7 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = { .slot_b = 0, .wire4 = 1, .wp_pin = AT91_PIN_PA17, + .vcc_pin = -EINVAL, }; #define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0 diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 07421bdb88ea..e029d220cb84 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -77,6 +77,8 @@ static void __init ek_init_early(void) */ static struct at91_usbh_data __initdata ek_usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; /* @@ -84,7 +86,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = { */ static struct at91_udc_data __initdata ek_udc_data = { .vbus_pin = AT91_PIN_PC5, - .pullup_pin = 0, /* pull-up driven by UDC */ + .pullup_pin = -EINVAL, /* pull-up driven by UDC */ }; /* @@ -104,7 +106,7 @@ static struct spi_board_info ek_spi_devices[] = { /* * MACB Ethernet device */ -static struct at91_eth_data __initdata ek_macb_data = { +static struct macb_platform_data __initdata ek_macb_data = { .phy_irq_pin = AT91_PIN_PA31, .is_rmii = 1, }; @@ -133,7 +135,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = { static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, -// .det_pin = ... not connected + .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .parts = ek_nand_partition, @@ -161,7 +163,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &ek_nand_smc_config); + sam9_smc_configure(0, 3, &ek_nand_smc_config); at91_add_device_nand(&ek_nand_data); } @@ -172,9 +174,9 @@ static void __init ek_add_device_nand(void) static struct at91_mmc_data __initdata ek_mmc_data = { .slot_b = 0, .wire4 = 1, -// .det_pin = ... not connected -// .wp_pin = ... not connected -// .vcc_pin = ... not connected + .det_pin = -EINVAL, + .wp_pin = -EINVAL, + .vcc_pin = -EINVAL, }; /* @@ -251,7 +253,7 @@ static void __init ek_board_init(void) /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); /* shutdown controller, wakeup button (5 msec low) */ - at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW + at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW | AT91_SHDW_RTTWKEN); } diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 80a8c9c6e922..782f37946af5 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -65,13 +65,15 @@ static void __init dk_init_early(void) at91_set_serial_console(0); } -static struct at91_eth_data __initdata dk_eth_data = { +static struct macb_platform_data __initdata dk_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, }; static struct at91_usbh_data __initdata dk_usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; static struct at91_udc_data __initdata dk_udc_data = { @@ -80,16 +82,19 @@ static struct at91_udc_data __initdata dk_udc_data = { }; static struct at91_cf_data __initdata dk_cf_data = { + .irq_pin = -EINVAL, .det_pin = AT91_PIN_PB0, + .vcc_pin = -EINVAL, .rst_pin = AT91_PIN_PC5, - // .irq_pin = ... not connected - // .vcc_pin = ... always powered }; #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD static struct at91_mmc_data __initdata dk_mmc_data = { .slot_b = 0, .wire4 = 1, + .det_pin = -EINVAL, + .wp_pin = -EINVAL, + .vcc_pin = -EINVAL, }; #endif @@ -143,7 +148,7 @@ static struct atmel_nand_data __initdata dk_nand_data = { .cle = 21, .det_pin = AT91_PIN_PB1, .rdy_pin = AT91_PIN_PC2, - // .enable_pin = ... not there + .enable_pin = -EINVAL, .parts = dk_nand_partition, .num_parts = ARRAY_SIZE(dk_nand_partition), }; diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 99fd7f8aee0e..ef7c12a92246 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -65,13 +65,15 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static struct at91_eth_data __initdata ek_eth_data = { +static struct macb_platform_data __initdata ek_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, }; static struct at91_usbh_data __initdata ek_usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; static struct at91_udc_data __initdata ek_udc_data = { @@ -85,6 +87,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = { .slot_b = 0, .wire4 = 1, .wp_pin = AT91_PIN_PA17, + .vcc_pin = -EINVAL, }; #endif diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index e927df0175df..af0750fafa29 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -60,7 +60,7 @@ static void __init rsi_ews_init_early(void) /* * Ethernet */ -static struct at91_eth_data rsi_ews_eth_data __initdata = { +static struct macb_platform_data rsi_ews_eth_data __initdata = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, }; @@ -70,6 +70,8 @@ static struct at91_eth_data rsi_ews_eth_data __initdata = { */ static struct at91_usbh_data rsi_ews_usbh_data __initdata = { .ports = 1, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; /* diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 072d53af98d9..84bce587735f 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -72,6 +72,8 @@ static void __init ek_init_early(void) */ static struct at91_usbh_data __initdata ek_usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; /* @@ -79,7 +81,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = { */ static struct at91_udc_data __initdata ek_udc_data = { .vbus_pin = AT91_PIN_PC5, - .pullup_pin = 0, /* pull-up driven by UDC */ + .pullup_pin = -EINVAL, /* pull-up driven by UDC */ }; @@ -109,7 +111,7 @@ static struct spi_board_info ek_spi_devices[] = { /* * MACB Ethernet device */ -static struct at91_eth_data __initdata ek_macb_data = { +static struct macb_platform_data __initdata ek_macb_data = { .phy_irq_pin = AT91_PIN_PA7, .is_rmii = 0, }; @@ -134,7 +136,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = { static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, -// .det_pin = ... not connected + .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .parts = ek_nand_partition, @@ -162,7 +164,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &ek_nand_smc_config); + sam9_smc_configure(0, 3, &ek_nand_smc_config); at91_add_device_nand(&ek_nand_data); } @@ -176,7 +178,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = { .wire4 = 1, .det_pin = AT91_PIN_PC8, .wp_pin = AT91_PIN_PC4, -// .vcc_pin = ... not connected + .vcc_pin = -EINVAL, }; static void __init ek_board_init(void) diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 4f10181a0782..be8233bcabdc 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -75,6 +75,8 @@ static void __init ek_init_early(void) */ static struct at91_usbh_data __initdata ek_usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; /* @@ -82,7 +84,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = { */ static struct at91_udc_data __initdata ek_udc_data = { .vbus_pin = AT91_PIN_PC5, - .pullup_pin = 0, /* pull-up driven by UDC */ + .pullup_pin = -EINVAL, /* pull-up driven by UDC */ }; @@ -151,7 +153,7 @@ static struct spi_board_info ek_spi_devices[] = { /* * MACB Ethernet device */ -static struct at91_eth_data __initdata ek_macb_data = { +static struct macb_platform_data __initdata ek_macb_data = { .phy_irq_pin = AT91_PIN_PA7, .is_rmii = 1, }; @@ -176,7 +178,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = { static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, -// .det_pin = ... not connected + .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .parts = ek_nand_partition, @@ -211,7 +213,7 @@ static void __init ek_add_device_nand(void) ek_nand_smc_config.mode |= AT91_SMC_DBW_8; /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &ek_nand_smc_config); + sam9_smc_configure(0, 3, &ek_nand_smc_config); at91_add_device_nand(&ek_nand_data); } @@ -223,9 +225,9 @@ static void __init ek_add_device_nand(void) static struct at91_mmc_data __initdata ek_mmc_data = { .slot_b = 1, .wire4 = 1, -// .det_pin = ... not connected -// .wp_pin = ... not connected -// .vcc_pin = ... not connected + .det_pin = -EINVAL, + .wp_pin = -EINVAL, + .vcc_pin = -EINVAL, }; diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index b005b738e8ff..40895072a1a7 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -131,7 +131,7 @@ static struct sam9_smc_config __initdata dm9000_smc_config = { static void __init ek_add_device_dm9000(void) { /* Configure chip-select 2 (DM9000) */ - sam9_smc_configure(2, &dm9000_smc_config); + sam9_smc_configure(0, 2, &dm9000_smc_config); /* Configure Reset signal as output */ at91_set_gpio_output(AT91_PIN_PC10, 0); @@ -151,6 +151,8 @@ static void __init ek_add_device_dm9000(void) {} */ static struct at91_usbh_data __initdata ek_usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; @@ -159,7 +161,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = { */ static struct at91_udc_data __initdata ek_udc_data = { .vbus_pin = AT91_PIN_PB29, - .pullup_pin = 0, /* pull-up driven by UDC */ + .pullup_pin = -EINVAL, /* pull-up driven by UDC */ }; @@ -182,7 +184,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = { static struct atmel_nand_data __initdata ek_nand_data = { .ale = 22, .cle = 21, -// .det_pin = ... not connected + .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC15, .enable_pin = AT91_PIN_PC14, .parts = ek_nand_partition, @@ -217,7 +219,7 @@ static void __init ek_add_device_nand(void) ek_nand_smc_config.mode |= AT91_SMC_DBW_8; /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &ek_nand_smc_config); + sam9_smc_configure(0, 3, &ek_nand_smc_config); at91_add_device_nand(&ek_nand_data); } @@ -345,6 +347,9 @@ static struct spi_board_info ek_spi_devices[] = { */ static struct at91_mmc_data __initdata ek_mmc_data = { .wire4 = 1, + .det_pin = -EINVAL, + .wp_pin = -EINVAL, + .vcc_pin = -EINVAL, }; #endif /* CONFIG_SPI_ATMEL_* */ diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index bccdcf23caa1..29f66052fe63 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -74,6 +74,7 @@ static void __init ek_init_early(void) static struct at91_usbh_data __initdata ek_usbh_data = { .ports = 2, .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 }, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; /* @@ -81,7 +82,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = { */ static struct at91_udc_data __initdata ek_udc_data = { .vbus_pin = AT91_PIN_PA25, - .pullup_pin = 0, /* pull-up driven by UDC */ + .pullup_pin = -EINVAL, /* pull-up driven by UDC */ }; @@ -151,14 +152,14 @@ static struct at91_mmc_data __initdata ek_mmc_data = { .wire4 = 1, .det_pin = AT91_PIN_PE18, .wp_pin = AT91_PIN_PE19, -// .vcc_pin = ... not connected + .vcc_pin = -EINVAL, }; /* * MACB Ethernet device */ -static struct at91_eth_data __initdata ek_macb_data = { +static struct macb_platform_data __initdata ek_macb_data = { .phy_irq_pin = AT91_PIN_PE31, .is_rmii = 1, }; @@ -183,7 +184,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = { static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, -// .det_pin = ... not connected + .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, .parts = ek_nand_partition, @@ -218,7 +219,7 @@ static void __init ek_add_device_nand(void) ek_nand_smc_config.mode |= AT91_SMC_DBW_8; /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &ek_nand_smc_config); + sam9_smc_configure(0, 3, &ek_nand_smc_config); at91_add_device_nand(&ek_nand_data); } @@ -353,6 +354,7 @@ static void __init ek_add_device_buttons(void) {} * reset_pin is not connected: NRST */ static struct ac97c_platform_data ek_ac97_data = { + .reset_pin = -EINVAL, }; diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 64fc75c9d0ac..843d6286c6f4 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -86,6 +86,8 @@ static void __init ek_init_early(void) */ static struct at91_usbh_data __initdata ek_usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; /* @@ -93,7 +95,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = { */ static struct at91_udc_data __initdata ek_udc_data = { .vbus_pin = AT91_PIN_PC5, - .pullup_pin = 0, /* pull-up driven by UDC */ + .pullup_pin = -EINVAL, /* pull-up driven by UDC */ }; @@ -123,7 +125,7 @@ static struct spi_board_info ek_spi_devices[] = { /* * MACB Ethernet device */ -static struct at91_eth_data __initdata ek_macb_data = { +static struct macb_platform_data __initdata ek_macb_data = { .phy_irq_pin = AT91_PIN_PA7, .is_rmii = 1, }; @@ -163,6 +165,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .cle = 22, .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, + .det_pin = -EINVAL, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; @@ -195,7 +198,7 @@ static void __init ek_add_device_nand(void) ek_nand_smc_config.mode |= AT91_SMC_DBW_8; /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &ek_nand_smc_config); + sam9_smc_configure(0, 3, &ek_nand_smc_config); at91_add_device_nand(&ek_nand_data); } @@ -210,6 +213,7 @@ static struct mci_platform_data __initdata ek_mmc_data = { .slot[1] = { .bus_width = 4, .detect_pin = AT91_PIN_PC9, + .wp_pin = -EINVAL, }, }; @@ -218,6 +222,8 @@ static struct at91_mmc_data __initdata ek_mmc_data = { .slot_b = 1, /* Only one slot so use slot B */ .wire4 = 1, .det_pin = AT91_PIN_PC9, + .wp_pin = -EINVAL, + .vcc_pin = -EINVAL, }; #endif @@ -227,6 +233,7 @@ static void __init ek_add_device_mmc(void) if (ek_have_2mmc()) { ek_mmc_data.slot[0].bus_width = 4; ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2; + ek_mmc_data.slot[0].wp_pin = -1; } at91_add_device_mci(0, &ek_mmc_data); #else diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 92de9127923a..ea0d1b9c2b7b 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -69,6 +69,7 @@ static void __init ek_init_early(void) static struct at91_usbh_data __initdata ek_usbh_hs_data = { .ports = 2, .vbus_pin = {AT91_PIN_PD1, AT91_PIN_PD3}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; @@ -100,6 +101,7 @@ static struct mci_platform_data __initdata mci0_data = { .slot[0] = { .bus_width = 4, .detect_pin = AT91_PIN_PD10, + .wp_pin = -EINVAL, }, }; @@ -115,7 +117,7 @@ static struct mci_platform_data __initdata mci1_data = { /* * MACB Ethernet device */ -static struct at91_eth_data __initdata ek_macb_data = { +static struct macb_platform_data __initdata ek_macb_data = { .phy_irq_pin = AT91_PIN_PD5, .is_rmii = 1, }; @@ -143,6 +145,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .cle = 22, .rdy_pin = AT91_PIN_PC8, .enable_pin = AT91_PIN_PC14, + .det_pin = -EINVAL, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; @@ -175,7 +178,7 @@ static void __init ek_add_device_nand(void) ek_nand_smc_config.mode |= AT91_SMC_DBW_8; /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &ek_nand_smc_config); + sam9_smc_configure(0, 3, &ek_nand_smc_config); at91_add_device_nand(&ek_nand_data); } @@ -330,6 +333,7 @@ static void __init ek_add_device_buttons(void) {} * reset_pin is not connected: NRST */ static struct ac97c_platform_data ek_ac97_data = { + .reset_pin = -EINVAL, }; diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index b2b748239f36..c1366d0032bf 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -67,8 +67,8 @@ static struct usba_platform_data __initdata ek_usba_udc_data = { static struct at91_mmc_data __initdata ek_mmc_data = { .wire4 = 1, .det_pin = AT91_PIN_PA15, -// .wp_pin = ... not connected -// .vcc_pin = ... not connected + .wp_pin = -EINVAL, + .vcc_pin = -EINVAL, }; @@ -91,7 +91,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = { static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, -// .det_pin = ... not connected + .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PD17, .enable_pin = AT91_PIN_PB6, .parts = ek_nand_partition, @@ -119,7 +119,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &ek_nand_smc_config); + sam9_smc_configure(0, 3, &ek_nand_smc_config); at91_add_device_nand(&ek_nand_data); } @@ -204,6 +204,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data; * reset_pin is not connected: NRST */ static struct ac97c_platform_data ek_ac97_data = { + .reset_pin = -EINVAL, }; diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 0df01c6e2d0c..4770db08e5a6 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -57,15 +57,19 @@ static void __init snapper9260_init_early(void) static struct at91_usbh_data __initdata snapper9260_usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; static struct at91_udc_data __initdata snapper9260_udc_data = { .vbus_pin = SNAPPER9260_IO_EXP_GPIO(5), .vbus_active_low = 1, .vbus_polled = 1, + .pullup_pin = -EINVAL, }; -static struct at91_eth_data snapper9260_macb_data = { +static struct macb_platform_data snapper9260_macb_data = { + .phy_irq_pin = -EINVAL, .is_rmii = 1, }; @@ -104,6 +108,8 @@ static struct atmel_nand_data __initdata snapper9260_nand_data = { .parts = snapper9260_nand_partitions, .num_parts = ARRAY_SIZE(snapper9260_nand_partitions), .bus_width_16 = 0, + .enable_pin = -EINVAL, + .det_pin = -EINVAL, }; static struct sam9_smc_config __initdata snapper9260_nand_smc_config = { @@ -149,7 +155,7 @@ static struct i2c_board_info __initdata snapper9260_i2c_devices[] = { static void __init snapper9260_add_device_nand(void) { at91_set_A_periph(AT91_PIN_PC14, 0); - sam9_smc_configure(3, &snapper9260_nand_smc_config); + sam9_smc_configure(0, 3, &snapper9260_nand_smc_config); at91_add_device_nand(&snapper9260_nand_data); } diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 936e5fd7f406..72eb3b4d9ab6 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -85,6 +85,7 @@ static struct atmel_nand_data __initdata nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .bus_width_16 = 0, + .det_pin = -EINVAL, }; static struct sam9_smc_config __initdata nand_smc_config = { @@ -108,7 +109,7 @@ static struct sam9_smc_config __initdata nand_smc_config = { static void __init add_device_nand(void) { /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &nand_smc_config); + sam9_smc_configure(0, 3, &nand_smc_config); at91_add_device_nand(&nand_data); } @@ -122,12 +123,17 @@ static void __init add_device_nand(void) static struct mci_platform_data __initdata mmc_data = { .slot[0] = { .bus_width = 4, + .detect_pin = -1, + .wp_pin = -1, }, }; #else static struct at91_mmc_data __initdata mmc_data = { .slot_b = 0, .wire4 = 1, + .det_pin = -EINVAL, + .wp_pin = -EINVAL, + .vcc_pin = -EINVAL, }; #endif @@ -137,6 +143,8 @@ static struct at91_mmc_data __initdata mmc_data = { */ static struct at91_usbh_data __initdata usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; @@ -145,19 +153,19 @@ static struct at91_usbh_data __initdata usbh_data = { */ static struct at91_udc_data __initdata portuxg20_udc_data = { .vbus_pin = AT91_PIN_PC7, - .pullup_pin = 0, /* pull-up driven by UDC */ + .pullup_pin = -EINVAL, /* pull-up driven by UDC */ }; static struct at91_udc_data __initdata stamp9g20evb_udc_data = { .vbus_pin = AT91_PIN_PA22, - .pullup_pin = 0, /* pull-up driven by UDC */ + .pullup_pin = -EINVAL, /* pull-up driven by UDC */ }; /* * MACB Ethernet device */ -static struct at91_eth_data __initdata macb_data = { +static struct macb_platform_data __initdata macb_data = { .phy_irq_pin = AT91_PIN_PA28, .is_rmii = 1, }; diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c index 0a20bab21f99..26c36fc2d1e5 100644 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -66,6 +66,8 @@ static void __init ek_init_early(void) */ static struct at91_usbh_data __initdata ek_usbh_data = { .ports = 2, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; /* @@ -73,7 +75,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = { */ static struct at91_udc_data __initdata ek_udc_data = { .vbus_pin = AT91_PIN_PB11, - .pullup_pin = 0, /* pull-up driven by UDC */ + .pullup_pin = -EINVAL, /* pull-up driven by UDC */ }; static void __init ek_add_device_udc(void) @@ -146,7 +148,7 @@ static void __init ek_add_device_spi(void) /* * MACB Ethernet device */ -static struct at91_eth_data __initdata ek_macb_data = { +static struct macb_platform_data __initdata ek_macb_data = { .phy_irq_pin = AT91_PIN_PE31, .is_rmii = 1, }; @@ -193,7 +195,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = { static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, -// .det_pin = ... not connected + .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, .parts = ek_nand_partition, @@ -245,9 +247,9 @@ static void __init ek_add_device_nand(void) /* configure chip-select 3 (NAND) */ if (machine_is_usb_a9g20()) - sam9_smc_configure(3, &usb_a9g20_nand_smc_config); + sam9_smc_configure(0, 3, &usb_a9g20_nand_smc_config); else - sam9_smc_configure(3, &usb_a9260_nand_smc_config); + sam9_smc_configure(0, 3, &usb_a9260_nand_smc_config); at91_add_device_nand(&ek_nand_data); } @@ -344,7 +346,7 @@ static void __init ek_board_init(void) /* I2C */ at91_add_device_i2c(NULL, 0); /* shutdown controller, wakeup button (5 msec low) */ - at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) + at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW | AT91_SHDW_RTTWKEN); } diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 12a3f955162b..bbd553e1cd93 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -110,7 +110,7 @@ static struct gpio_led yl9200_leds[] = { /* * Ethernet */ -static struct at91_eth_data __initdata yl9200_eth_data = { +static struct macb_platform_data __initdata yl9200_eth_data = { .phy_irq_pin = AT91_PIN_PB28, .is_rmii = 1, }; @@ -120,6 +120,8 @@ static struct at91_eth_data __initdata yl9200_eth_data = { */ static struct at91_usbh_data __initdata yl9200_usbh_data = { .ports = 1, /* PQFP version of AT91RM9200 */ + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; /* @@ -137,8 +139,9 @@ static struct at91_udc_data __initdata yl9200_udc_data = { */ static struct at91_mmc_data __initdata yl9200_mmc_data = { .det_pin = AT91_PIN_PB9, - // .wp_pin = ... not connected .wire4 = 1, + .wp_pin = -EINVAL, + .vcc_pin = -EINVAL, }; /* @@ -175,7 +178,7 @@ static struct mtd_partition __initdata yl9200_nand_partition[] = { static struct atmel_nand_data __initdata yl9200_nand_data = { .ale = 6, .cle = 7, - // .det_pin = ... not connected + .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */ .enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */ .parts = yl9200_nand_partition, diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 938b34f57741..4866b8180d66 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -29,6 +29,7 @@ extern void __init at91_aic_init(unsigned int priority[]); /* Timer */ struct sys_timer; extern struct sys_timer at91rm9200_timer; +extern void at91sam926x_ioremap_pit(u32 addr); extern struct sys_timer at91sam926x_timer; extern struct sys_timer at91x40_timer; @@ -57,7 +58,10 @@ extern void at91_irq_suspend(void); extern void at91_irq_resume(void); /* reset */ -extern void at91sam9_alt_reset(void); +extern void at91sam9_alt_restart(char, const char *); + +/* shutdown */ +extern void at91_ioremap_shdwc(u32 base_addr); /* GPIO */ #define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */ @@ -65,11 +69,9 @@ extern void at91sam9_alt_reset(void); struct at91_gpio_bank { unsigned short id; /* peripheral ID */ - unsigned long offset; /* offset from system peripheral base */ - struct clk *clock; /* associated clock */ + unsigned long regbase; /* offset from system peripheral base */ }; extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks); extern void __init at91_gpio_irq_setup(void); -extern void (*at91_arch_reset)(void); extern int at91_extern_irq; diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index 224e9e2f8674..74d6783eeabb 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -29,8 +29,9 @@ struct at91_gpio_chip { struct gpio_chip chip; struct at91_gpio_chip *next; /* Bank sharing same clock */ - struct at91_gpio_bank *bank; /* Bank definition */ + int id; /* ID of register bank */ void __iomem *regbase; /* Base of register bank */ + struct clk *clock; /* associated clock */ }; #define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip) @@ -58,18 +59,17 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip, } static struct at91_gpio_chip gpio_chip[] = { - AT91_GPIO_CHIP("A", 0x00 + PIN_BASE, 32), - AT91_GPIO_CHIP("B", 0x20 + PIN_BASE, 32), - AT91_GPIO_CHIP("C", 0x40 + PIN_BASE, 32), - AT91_GPIO_CHIP("D", 0x60 + PIN_BASE, 32), - AT91_GPIO_CHIP("E", 0x80 + PIN_BASE, 32), + AT91_GPIO_CHIP("pioA", 0x00, 32), + AT91_GPIO_CHIP("pioB", 0x20, 32), + AT91_GPIO_CHIP("pioC", 0x40, 32), + AT91_GPIO_CHIP("pioD", 0x60, 32), + AT91_GPIO_CHIP("pioE", 0x80, 32), }; static int gpio_banks; static inline void __iomem *pin_to_controller(unsigned pin) { - pin -= PIN_BASE; pin /= 32; if (likely(pin < gpio_banks)) return gpio_chip[pin].regbase; @@ -79,7 +79,6 @@ static inline void __iomem *pin_to_controller(unsigned pin) static inline unsigned pin_to_mask(unsigned pin) { - pin -= PIN_BASE; return 1 << (pin % 32); } @@ -274,8 +273,9 @@ static u32 backups[MAX_GPIO_BANKS]; static int gpio_irq_set_wake(struct irq_data *d, unsigned state) { - unsigned mask = pin_to_mask(d->irq); - unsigned bank = (d->irq - PIN_BASE) / 32; + unsigned pin = irq_to_gpio(d->irq); + unsigned mask = pin_to_mask(pin); + unsigned bank = pin / 32; if (unlikely(bank >= MAX_GPIO_BANKS)) return -EINVAL; @@ -285,7 +285,7 @@ static int gpio_irq_set_wake(struct irq_data *d, unsigned state) else wakeups[bank] &= ~mask; - irq_set_irq_wake(gpio_chip[bank].bank->id, state); + irq_set_irq_wake(gpio_chip[bank].id, state); return 0; } @@ -302,7 +302,7 @@ void at91_gpio_suspend(void) __raw_writel(wakeups[i], pio + PIO_IER); if (!wakeups[i]) - clk_disable(gpio_chip[i].bank->clock); + clk_disable(gpio_chip[i].clock); else { #ifdef CONFIG_PM_DEBUG printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]); @@ -319,7 +319,7 @@ void at91_gpio_resume(void) void __iomem *pio = gpio_chip[i].regbase; if (!wakeups[i]) - clk_enable(gpio_chip[i].bank->clock); + clk_enable(gpio_chip[i].clock); __raw_writel(wakeups[i], pio + PIO_IDR); __raw_writel(backups[i], pio + PIO_IER); @@ -344,8 +344,9 @@ void at91_gpio_resume(void) static void gpio_irq_mask(struct irq_data *d) { - void __iomem *pio = pin_to_controller(d->irq); - unsigned mask = pin_to_mask(d->irq); + unsigned pin = irq_to_gpio(d->irq); + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); if (pio) __raw_writel(mask, pio + PIO_IDR); @@ -353,8 +354,9 @@ static void gpio_irq_mask(struct irq_data *d) static void gpio_irq_unmask(struct irq_data *d) { - void __iomem *pio = pin_to_controller(d->irq); - unsigned mask = pin_to_mask(d->irq); + unsigned pin = irq_to_gpio(d->irq); + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); if (pio) __raw_writel(mask, pio + PIO_IER); @@ -382,7 +384,7 @@ static struct irq_chip gpio_irqchip = { static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) { - unsigned pin; + unsigned irq_pin; struct irq_data *idata = irq_desc_get_irq_data(desc); struct irq_chip *chip = irq_data_get_irq_chip(idata); struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata); @@ -405,12 +407,12 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) continue; } - pin = at91_gpio->chip.base; + irq_pin = gpio_to_irq(at91_gpio->chip.base); while (isr) { if (isr & 1) - generic_handle_irq(pin); - pin++; + generic_handle_irq(irq_pin); + irq_pin++; isr >>= 1; } } @@ -438,7 +440,7 @@ static int at91_gpio_show(struct seq_file *s, void *unused) seq_printf(s, "%i:\t", j); for (bank = 0; bank < gpio_banks; bank++) { - unsigned pin = PIN_BASE + (32 * bank) + j; + unsigned pin = (32 * bank) + j; void __iomem *pio = pin_to_controller(pin); unsigned mask = pin_to_mask(pin); @@ -491,27 +493,28 @@ static struct lock_class_key gpio_lock_class; */ void __init at91_gpio_irq_setup(void) { - unsigned pioc, pin; + unsigned pioc, irq = gpio_to_irq(0); struct at91_gpio_chip *this, *prev; - for (pioc = 0, pin = PIN_BASE, this = gpio_chip, prev = NULL; + for (pioc = 0, this = gpio_chip, prev = NULL; pioc++ < gpio_banks; prev = this, this++) { - unsigned id = this->bank->id; + unsigned id = this->id; unsigned i; __raw_writel(~0, this->regbase + PIO_IDR); - for (i = 0, pin = this->chip.base; i < 32; i++, pin++) { - irq_set_lockdep_class(pin, &gpio_lock_class); + for (i = 0, irq = gpio_to_irq(this->chip.base); i < 32; + i++, irq++) { + irq_set_lockdep_class(irq, &gpio_lock_class); /* * Can use the "simple" and not "edge" handler since it's * shorter, and the AIC handles interrupts sanely. */ - irq_set_chip_and_handler(pin, &gpio_irqchip, + irq_set_chip_and_handler(irq, &gpio_irqchip, handle_simple_irq); - set_irq_flags(pin, IRQF_VALID); + set_irq_flags(irq, IRQF_VALID); } /* The toplevel handler handles one bank of GPIOs, except @@ -524,7 +527,7 @@ void __init at91_gpio_irq_setup(void) irq_set_chip_data(id, this); irq_set_chained_handler(id, gpio_irq_handler); } - pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks); + pr_info("AT91: %d gpio irqs in %d banks\n", irq - gpio_to_irq(0), gpio_banks); } /* gpiolib support */ @@ -612,16 +615,26 @@ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks) for (i = 0; i < nr_banks; i++) { at91_gpio = &gpio_chip[i]; - at91_gpio->bank = &data[i]; - at91_gpio->chip.base = PIN_BASE + i * 32; - at91_gpio->regbase = at91_gpio->bank->offset + - (void __iomem *)AT91_VA_BASE_SYS; + at91_gpio->id = data[i].id; + at91_gpio->chip.base = i * 32; + + at91_gpio->regbase = ioremap(data[i].regbase, 512); + if (!at91_gpio->regbase) { + pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", i); + continue; + } + + at91_gpio->clock = clk_get_sys(NULL, at91_gpio->chip.label); + if (!at91_gpio->clock) { + pr_err("at91_gpio.%d, failed to get clock, ignoring.\n", i); + continue; + } /* enable PIO controller's clock */ - clk_enable(at91_gpio->bank->clock); + clk_enable(at91_gpio->clock); /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */ - if (last && last->bank->id == at91_gpio->bank->id) + if (last && last->id == at91_gpio->id) last->next = at91_gpio; last = at91_gpio; diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/include/mach/at91_aic.h index 03566799d3be..3045781c473f 100644 --- a/arch/arm/mach-at91/include/mach/at91_aic.h +++ b/arch/arm/mach-at91/include/mach/at91_aic.h @@ -16,7 +16,19 @@ #ifndef AT91_AIC_H #define AT91_AIC_H -#define AT91_AIC_SMR(n) (AT91_AIC + ((n) * 4)) /* Source Mode Registers 0-31 */ +#ifndef __ASSEMBLY__ +extern void __iomem *at91_aic_base; + +#define at91_aic_read(field) \ + __raw_readl(at91_aic_base + field) + +#define at91_aic_write(field, value) \ + __raw_writel(value, at91_aic_base + field); +#else +.extern at91_aic_base +#endif + +#define AT91_AIC_SMR(n) ((n) * 4) /* Source Mode Registers 0-31 */ #define AT91_AIC_PRIOR (7 << 0) /* Priority Level */ #define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */ #define AT91_AIC_SRCTYPE_LOW (0 << 5) @@ -24,30 +36,30 @@ #define AT91_AIC_SRCTYPE_HIGH (2 << 5) #define AT91_AIC_SRCTYPE_RISING (3 << 5) -#define AT91_AIC_SVR(n) (AT91_AIC + 0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */ -#define AT91_AIC_IVR (AT91_AIC + 0x100) /* Interrupt Vector Register */ -#define AT91_AIC_FVR (AT91_AIC + 0x104) /* Fast Interrupt Vector Register */ -#define AT91_AIC_ISR (AT91_AIC + 0x108) /* Interrupt Status Register */ +#define AT91_AIC_SVR(n) (0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */ +#define AT91_AIC_IVR 0x100 /* Interrupt Vector Register */ +#define AT91_AIC_FVR 0x104 /* Fast Interrupt Vector Register */ +#define AT91_AIC_ISR 0x108 /* Interrupt Status Register */ #define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */ -#define AT91_AIC_IPR (AT91_AIC + 0x10c) /* Interrupt Pending Register */ -#define AT91_AIC_IMR (AT91_AIC + 0x110) /* Interrupt Mask Register */ -#define AT91_AIC_CISR (AT91_AIC + 0x114) /* Core Interrupt Status Register */ +#define AT91_AIC_IPR 0x10c /* Interrupt Pending Register */ +#define AT91_AIC_IMR 0x110 /* Interrupt Mask Register */ +#define AT91_AIC_CISR 0x114 /* Core Interrupt Status Register */ #define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */ #define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */ -#define AT91_AIC_IECR (AT91_AIC + 0x120) /* Interrupt Enable Command Register */ -#define AT91_AIC_IDCR (AT91_AIC + 0x124) /* Interrupt Disable Command Register */ -#define AT91_AIC_ICCR (AT91_AIC + 0x128) /* Interrupt Clear Command Register */ -#define AT91_AIC_ISCR (AT91_AIC + 0x12c) /* Interrupt Set Command Register */ -#define AT91_AIC_EOICR (AT91_AIC + 0x130) /* End of Interrupt Command Register */ -#define AT91_AIC_SPU (AT91_AIC + 0x134) /* Spurious Interrupt Vector Register */ -#define AT91_AIC_DCR (AT91_AIC + 0x138) /* Debug Control Register */ +#define AT91_AIC_IECR 0x120 /* Interrupt Enable Command Register */ +#define AT91_AIC_IDCR 0x124 /* Interrupt Disable Command Register */ +#define AT91_AIC_ICCR 0x128 /* Interrupt Clear Command Register */ +#define AT91_AIC_ISCR 0x12c /* Interrupt Set Command Register */ +#define AT91_AIC_EOICR 0x130 /* End of Interrupt Command Register */ +#define AT91_AIC_SPU 0x134 /* Spurious Interrupt Vector Register */ +#define AT91_AIC_DCR 0x138 /* Debug Control Register */ #define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */ #define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */ -#define AT91_AIC_FFER (AT91_AIC + 0x140) /* Fast Forcing Enable Register [SAM9 only] */ -#define AT91_AIC_FFDR (AT91_AIC + 0x144) /* Fast Forcing Disable Register [SAM9 only] */ -#define AT91_AIC_FFSR (AT91_AIC + 0x148) /* Fast Forcing Status Register [SAM9 only] */ +#define AT91_AIC_FFER 0x140 /* Fast Forcing Enable Register [SAM9 only] */ +#define AT91_AIC_FFDR 0x144 /* Fast Forcing Disable Register [SAM9 only] */ +#define AT91_AIC_FFSR 0x148 /* Fast Forcing Status Register [SAM9 only] */ #endif diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h index dbfe455a4c41..2aa0c5e13495 100644 --- a/arch/arm/mach-at91/include/mach/at91_dbgu.h +++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h @@ -19,7 +19,7 @@ #define dbgu_readl(dbgu, field) \ __raw_readl(AT91_VA_BASE_SYS + dbgu + AT91_DBGU_ ## field) -#ifdef AT91_DBGU +#if !defined(CONFIG_ARCH_AT91X40) #define AT91_DBGU_CR (0x00) /* Control Register */ #define AT91_DBGU_MR (0x04) /* Mode Register */ #define AT91_DBGU_IER (0x08) /* Interrupt Enable Register */ diff --git a/arch/arm/mach-at91/include/mach/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h index 974d0bd05b5b..d1f80ad7f4d4 100644 --- a/arch/arm/mach-at91/include/mach/at91_pit.h +++ b/arch/arm/mach-at91/include/mach/at91_pit.h @@ -16,16 +16,16 @@ #ifndef AT91_PIT_H #define AT91_PIT_H -#define AT91_PIT_MR (AT91_PIT + 0x00) /* Mode Register */ +#define AT91_PIT_MR 0x00 /* Mode Register */ #define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ #define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */ #define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */ -#define AT91_PIT_SR (AT91_PIT + 0x04) /* Status Register */ +#define AT91_PIT_SR 0x04 /* Status Register */ #define AT91_PIT_PITS (1 << 0) /* Timer Status */ -#define AT91_PIT_PIVR (AT91_PIT + 0x08) /* Periodic Interval Value Register */ -#define AT91_PIT_PIIR (AT91_PIT + 0x0c) /* Periodic Interval Image Register */ +#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */ +#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */ #define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */ #define AT91_PIT_CPIV (0xfffff) /* Inverval Value */ diff --git a/arch/arm/mach-at91/include/mach/at91_rtc.h b/arch/arm/mach-at91/include/mach/at91_rtc.h index e56f4701a3e5..da1945e5f714 100644 --- a/arch/arm/mach-at91/include/mach/at91_rtc.h +++ b/arch/arm/mach-at91/include/mach/at91_rtc.h @@ -16,7 +16,7 @@ #ifndef AT91_RTC_H #define AT91_RTC_H -#define AT91_RTC_CR (AT91_RTC + 0x00) /* Control Register */ +#define AT91_RTC_CR 0x00 /* Control Register */ #define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */ #define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */ #define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */ @@ -29,44 +29,44 @@ #define AT91_RTC_CALEVSEL_MONTH (1 << 16) #define AT91_RTC_CALEVSEL_YEAR (2 << 16) -#define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */ +#define AT91_RTC_MR 0x04 /* Mode Register */ #define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */ -#define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */ +#define AT91_RTC_TIMR 0x08 /* Time Register */ #define AT91_RTC_SEC (0x7f << 0) /* Current Second */ #define AT91_RTC_MIN (0x7f << 8) /* Current Minute */ #define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ #define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */ -#define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */ +#define AT91_RTC_CALR 0x0c /* Calendar Register */ #define AT91_RTC_CENT (0x7f << 0) /* Current Century */ #define AT91_RTC_YEAR (0xff << 8) /* Current Year */ #define AT91_RTC_MONTH (0x1f << 16) /* Current Month */ #define AT91_RTC_DAY (7 << 21) /* Current Day */ #define AT91_RTC_DATE (0x3f << 24) /* Current Date */ -#define AT91_RTC_TIMALR (AT91_RTC + 0x10) /* Time Alarm Register */ +#define AT91_RTC_TIMALR 0x10 /* Time Alarm Register */ #define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */ #define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */ #define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */ -#define AT91_RTC_CALALR (AT91_RTC + 0x14) /* Calendar Alarm Register */ +#define AT91_RTC_CALALR 0x14 /* Calendar Alarm Register */ #define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */ #define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */ -#define AT91_RTC_SR (AT91_RTC + 0x18) /* Status Register */ +#define AT91_RTC_SR 0x18 /* Status Register */ #define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */ #define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */ #define AT91_RTC_SECEV (1 << 2) /* Second Event */ #define AT91_RTC_TIMEV (1 << 3) /* Time Event */ #define AT91_RTC_CALEV (1 << 4) /* Calendar Event */ -#define AT91_RTC_SCCR (AT91_RTC + 0x1c) /* Status Clear Command Register */ -#define AT91_RTC_IER (AT91_RTC + 0x20) /* Interrupt Enable Register */ -#define AT91_RTC_IDR (AT91_RTC + 0x24) /* Interrupt Disable Register */ -#define AT91_RTC_IMR (AT91_RTC + 0x28) /* Interrupt Mask Register */ +#define AT91_RTC_SCCR 0x1c /* Status Clear Command Register */ +#define AT91_RTC_IER 0x20 /* Interrupt Enable Register */ +#define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */ +#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */ -#define AT91_RTC_VER (AT91_RTC + 0x2c) /* Valid Entry Register */ +#define AT91_RTC_VER 0x2c /* Valid Entry Register */ #define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */ #define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */ #define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */ diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h index c4ce07e8a8fa..1d4fe822c77a 100644 --- a/arch/arm/mach-at91/include/mach/at91_shdwc.h +++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h @@ -16,11 +16,21 @@ #ifndef AT91_SHDWC_H #define AT91_SHDWC_H -#define AT91_SHDW_CR (AT91_SHDWC + 0x00) /* Shut Down Control Register */ +#ifndef __ASSEMBLY__ +extern void __iomem *at91_shdwc_base; + +#define at91_shdwc_read(field) \ + __raw_readl(at91_shdwc_base + field) + +#define at91_shdwc_write(field, value) \ + __raw_writel(value, at91_shdwc_base + field); +#endif + +#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */ #define AT91_SHDW_SHDW (1 << 0) /* Shut Down command */ #define AT91_SHDW_KEY (0xa5 << 24) /* KEY Password */ -#define AT91_SHDW_MR (AT91_SHDWC + 0x04) /* Shut Down Mode Register */ +#define AT91_SHDW_MR 0x04 /* Shut Down Mode Register */ #define AT91_SHDW_WKMODE0 (3 << 0) /* Wake-up 0 Mode Selection */ #define AT91_SHDW_WKMODE0_NONE 0 #define AT91_SHDW_WKMODE0_HIGH 1 @@ -30,7 +40,7 @@ #define AT91_SHDW_CPTWK0_(x) ((x) << 4) #define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */ -#define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */ +#define AT91_SHDW_SR 0x08 /* Shut Down Status Register */ #define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */ #define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */ #define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */ diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index c5df1e8f1955..4c0e2f6011d7 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -79,29 +79,28 @@ /* * System Peripherals (offset from AT91_BASE_SYS) */ -#define AT91_ECC (0xffffe200 - AT91_BASE_SYS) #define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS) #define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) -#define AT91_SMC (0xffffe800 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) -#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS) -#define AT91_DMA (0xffffec00 - AT91_BASE_SYS) -#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) #define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) #define AT91_GPBR (cpu_is_at91cap9_revB() ? \ (0xfffffd50 - AT91_BASE_SYS) : \ (0xfffffd60 - AT91_BASE_SYS)) +#define AT91CAP9_BASE_ECC 0xffffe200 +#define AT91CAP9_BASE_DMA 0xffffec00 +#define AT91CAP9_BASE_SMC 0xffffe800 +#define AT91CAP9_BASE_DBGU AT91_BASE_DBGU1 +#define AT91CAP9_BASE_PIOA 0xfffff200 +#define AT91CAP9_BASE_PIOB 0xfffff400 +#define AT91CAP9_BASE_PIOC 0xfffff600 +#define AT91CAP9_BASE_PIOD 0xfffff800 +#define AT91CAP9_BASE_SHDWC 0xfffffd10 +#define AT91CAP9_BASE_RTT 0xfffffd20 +#define AT91CAP9_BASE_PIT 0xfffffd30 +#define AT91CAP9_BASE_WDT 0xfffffd40 + #define AT91_USART0 AT91CAP9_BASE_US0 #define AT91_USART1 AT91CAP9_BASE_US1 #define AT91_USART2 AT91CAP9_BASE_US2 diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h index e4037b500302..bacb51141819 100644 --- a/arch/arm/mach-at91/include/mach/at91rm9200.h +++ b/arch/arm/mach-at91/include/mach/at91rm9200.h @@ -79,17 +79,17 @@ /* * System Peripherals (offset from AT91_BASE_SYS) */ -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */ -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) /* Debug Unit */ -#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) /* PIO Controller A */ -#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) /* PIO Controller B */ -#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) /* PIO Controller C */ -#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS) /* PIO Controller D */ #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) /* Power Management Controller */ #define AT91_ST (0xfffffd00 - AT91_BASE_SYS) /* System Timer */ -#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) /* Real-Time Clock */ #define AT91_MC (0xffffff00 - AT91_BASE_SYS) /* Memory Controllers */ +#define AT91RM9200_BASE_DBGU AT91_BASE_DBGU0 /* Debug Unit */ +#define AT91RM9200_BASE_PIOA 0xfffff400 /* PIO Controller A */ +#define AT91RM9200_BASE_PIOB 0xfffff600 /* PIO Controller B */ +#define AT91RM9200_BASE_PIOC 0xfffff800 /* PIO Controller C */ +#define AT91RM9200_BASE_PIOD 0xfffffa00 /* PIO Controller D */ +#define AT91RM9200_BASE_RTC 0xfffffe00 /* Real-Time Clock */ + #define AT91_USART0 AT91RM9200_BASE_US0 #define AT91_USART1 AT91RM9200_BASE_US1 #define AT91_USART2 AT91RM9200_BASE_US2 diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index 9a791165913f..f937c476bb67 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -80,24 +80,23 @@ /* * System Peripherals (offset from AT91_BASE_SYS) */ -#define AT91_ECC (0xffffe800 - AT91_BASE_SYS) #define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) -#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) #define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) +#define AT91SAM9260_BASE_ECC 0xffffe800 +#define AT91SAM9260_BASE_SMC 0xffffec00 +#define AT91SAM9260_BASE_DBGU AT91_BASE_DBGU0 +#define AT91SAM9260_BASE_PIOA 0xfffff400 +#define AT91SAM9260_BASE_PIOB 0xfffff600 +#define AT91SAM9260_BASE_PIOC 0xfffff800 +#define AT91SAM9260_BASE_SHDWC 0xfffffd10 +#define AT91SAM9260_BASE_RTT 0xfffffd20 +#define AT91SAM9260_BASE_PIT 0xfffffd30 +#define AT91SAM9260_BASE_WDT 0xfffffd40 + #define AT91_USART0 AT91SAM9260_BASE_US0 #define AT91_USART1 AT91SAM9260_BASE_US1 #define AT91_USART2 AT91SAM9260_BASE_US2 diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index ce596204cefa..175604e261be 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -66,21 +66,21 @@ * System Peripherals (offset from AT91_BASE_SYS) */ #define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) -#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) #define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) +#define AT91SAM9261_BASE_SMC 0xffffec00 +#define AT91SAM9261_BASE_DBGU AT91_BASE_DBGU0 +#define AT91SAM9261_BASE_PIOA 0xfffff400 +#define AT91SAM9261_BASE_PIOB 0xfffff600 +#define AT91SAM9261_BASE_PIOC 0xfffff800 +#define AT91SAM9261_BASE_SHDWC 0xfffffd10 +#define AT91SAM9261_BASE_RTT 0xfffffd20 +#define AT91SAM9261_BASE_PIT 0xfffffd30 +#define AT91SAM9261_BASE_WDT 0xfffffd40 + #define AT91_USART0 AT91SAM9261_BASE_US0 #define AT91_USART1 AT91SAM9261_BASE_US1 #define AT91_USART2 AT91SAM9261_BASE_US2 diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index f1b92961a2b1..80c915002d83 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -74,30 +74,29 @@ /* * System Peripherals (offset from AT91_BASE_SYS) */ -#define AT91_ECC0 (0xffffe000 - AT91_BASE_SYS) #define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS) -#define AT91_SMC0 (0xffffe400 - AT91_BASE_SYS) -#define AT91_ECC1 (0xffffe600 - AT91_BASE_SYS) #define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS) -#define AT91_SMC1 (0xffffea00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS) -#define AT91_CCFG (0xffffed10 - AT91_BASE_SYS) -#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) -#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) #define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) -#define AT91_RTT0 (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) -#define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) +#define AT91SAM9263_BASE_ECC0 0xffffe000 +#define AT91SAM9263_BASE_SMC0 0xffffe400 +#define AT91SAM9263_BASE_ECC1 0xffffe600 +#define AT91SAM9263_BASE_SMC1 0xffffea00 +#define AT91SAM9263_BASE_DBGU AT91_BASE_DBGU1 +#define AT91SAM9263_BASE_PIOA 0xfffff200 +#define AT91SAM9263_BASE_PIOB 0xfffff400 +#define AT91SAM9263_BASE_PIOC 0xfffff600 +#define AT91SAM9263_BASE_PIOD 0xfffff800 +#define AT91SAM9263_BASE_PIOE 0xfffffa00 +#define AT91SAM9263_BASE_SHDWC 0xfffffd10 +#define AT91SAM9263_BASE_RTT0 0xfffffd20 +#define AT91SAM9263_BASE_PIT 0xfffffd30 +#define AT91SAM9263_BASE_WDT 0xfffffd40 +#define AT91SAM9263_BASE_RTT1 0xfffffd50 + #define AT91_USART0 AT91SAM9263_BASE_US0 #define AT91_USART1 AT91SAM9263_BASE_US1 #define AT91_USART2 AT91SAM9263_BASE_US2 diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h index 57de6207e57e..eb18a70fa647 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h @@ -16,7 +16,9 @@ #ifndef AT91SAM9_SMC_H #define AT91SAM9_SMC_H -#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ +#include <mach/cpu.h> + +#define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */ #define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ #define AT91_SMC_NWESETUP_(x) ((x) << 0) #define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */ @@ -26,7 +28,7 @@ #define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */ #define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24) -#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ +#define AT91_SMC_PULSE 0x04 /* Pulse Register for CS n */ #define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */ #define AT91_SMC_NWEPULSE_(x) ((x) << 0) #define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */ @@ -36,13 +38,13 @@ #define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */ #define AT91_SMC_NCS_RDPULSE_(x)((x) << 24) -#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ +#define AT91_SMC_CYCLE 0x08 /* Cycle Register for CS n */ #define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */ #define AT91_SMC_NWECYCLE_(x) ((x) << 0) #define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */ #define AT91_SMC_NRDCYCLE_(x) ((x) << 16) -#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ +#define AT91_SMC_MODE 0x0c /* Mode Register for CS n */ #define AT91_SMC_READMODE (1 << 0) /* Read Mode */ #define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ #define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */ @@ -66,11 +68,4 @@ #define AT91_SMC_PS_16 (2 << 28) #define AT91_SMC_PS_32 (3 << 28) -#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */ -#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ -#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ -#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ -#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ -#endif - #endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index 406bb6496805..f0c23c960dec 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -86,27 +86,27 @@ /* * System Peripherals (offset from AT91_BASE_SYS) */ -#define AT91_ECC (0xffffe200 - AT91_BASE_SYS) #define AT91_DDRSDRC1 (0xffffe400 - AT91_BASE_SYS) #define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) -#define AT91_SMC (0xffffe800 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) -#define AT91_DMA (0xffffec00 - AT91_BASE_SYS) -#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) -#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) #define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) -#define AT91_RTC (0xfffffdb0 - AT91_BASE_SYS) + +#define AT91SAM9G45_BASE_ECC 0xffffe200 +#define AT91SAM9G45_BASE_DMA 0xffffec00 +#define AT91SAM9G45_BASE_SMC 0xffffe800 +#define AT91SAM9G45_BASE_DBGU AT91_BASE_DBGU1 +#define AT91SAM9G45_BASE_PIOA 0xfffff200 +#define AT91SAM9G45_BASE_PIOB 0xfffff400 +#define AT91SAM9G45_BASE_PIOC 0xfffff600 +#define AT91SAM9G45_BASE_PIOD 0xfffff800 +#define AT91SAM9G45_BASE_PIOE 0xfffffa00 +#define AT91SAM9G45_BASE_SHDWC 0xfffffd10 +#define AT91SAM9G45_BASE_RTT 0xfffffd20 +#define AT91SAM9G45_BASE_PIT 0xfffffd30 +#define AT91SAM9G45_BASE_WDT 0xfffffd40 +#define AT91SAM9G45_BASE_RTC 0xfffffdb0 #define AT91_USART0 AT91SAM9G45_BASE_US0 #define AT91_USART1 AT91SAM9G45_BASE_US1 diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index 1aabacd315d4..2bb359e60b97 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -69,27 +69,26 @@ /* * System Peripherals (offset from AT91_BASE_SYS) */ -#define AT91_DMA (0xffffe600 - AT91_BASE_SYS) -#define AT91_ECC (0xffffe800 - AT91_BASE_SYS) #define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) -#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) -#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) #define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) #define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) -#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) + +#define AT91SAM9RL_BASE_DMA 0xffffe600 +#define AT91SAM9RL_BASE_ECC 0xffffe800 +#define AT91SAM9RL_BASE_SMC 0xffffec00 +#define AT91SAM9RL_BASE_DBGU AT91_BASE_DBGU0 +#define AT91SAM9RL_BASE_PIOA 0xfffff400 +#define AT91SAM9RL_BASE_PIOB 0xfffff600 +#define AT91SAM9RL_BASE_PIOC 0xfffff800 +#define AT91SAM9RL_BASE_PIOD 0xfffffa00 +#define AT91SAM9RL_BASE_SHDWC 0xfffffd10 +#define AT91SAM9RL_BASE_RTT 0xfffffd20 +#define AT91SAM9RL_BASE_PIT 0xfffffd30 +#define AT91SAM9RL_BASE_WDT 0xfffffd40 +#define AT91SAM9RL_BASE_RTC 0xfffffe00 #define AT91_USART0 AT91SAM9RL_BASE_US0 #define AT91_USART1 AT91SAM9RL_BASE_US1 diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h index a152ff87e688..a57829f4fd18 100644 --- a/arch/arm/mach-at91/include/mach/at91x40.h +++ b/arch/arm/mach-at91/include/mach/at91x40.h @@ -40,7 +40,6 @@ #define AT91_PIOA (0xffff0000 - AT91_BASE_SYS) /* PIO Controller A */ #define AT91_PS (0xffff4000 - AT91_BASE_SYS) /* Power Save */ #define AT91_WD (0xffff8000 - AT91_BASE_SYS) /* Watchdog Timer */ -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */ /* * The AT91x40 series doesn't have a debug unit like the other AT91 parts. diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index eac92e995bb5..d0b377b21bd7 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -40,13 +40,14 @@ #include <linux/atmel-mci.h> #include <sound/atmel-ac97c.h> #include <linux/serial.h> +#include <linux/platform_data/macb.h> /* USB Device */ struct at91_udc_data { - u8 vbus_pin; /* high == host powering us */ + int vbus_pin; /* high == host powering us */ u8 vbus_active_low; /* vbus polarity */ u8 vbus_polled; /* Use polling, not interrupt */ - u8 pullup_pin; /* active == D+ pulled up */ + int pullup_pin; /* active == D+ pulled up */ u8 pullup_active_low; /* true == pullup_pin is active low */ }; extern void __init at91_add_device_udc(struct at91_udc_data *data); @@ -56,10 +57,10 @@ extern void __init at91_add_device_usba(struct usba_platform_data *data); /* Compact Flash */ struct at91_cf_data { - u8 irq_pin; /* I/O IRQ */ - u8 det_pin; /* Card detect */ - u8 vcc_pin; /* power switching */ - u8 rst_pin; /* card reset */ + int irq_pin; /* I/O IRQ */ + int det_pin; /* Card detect */ + int vcc_pin; /* power switching */ + int rst_pin; /* card reset */ u8 chipselect; /* EBI Chip Select number */ u8 flags; #define AT91_CF_TRUE_IDE 0x01 @@ -70,37 +71,26 @@ extern void __init at91_add_device_cf(struct at91_cf_data *data); /* MMC / SD */ /* at91_mci platform config */ struct at91_mmc_data { - u8 det_pin; /* card detect IRQ */ + int det_pin; /* card detect IRQ */ unsigned slot_b:1; /* uses Slot B */ unsigned wire4:1; /* (SD) supports DAT0..DAT3 */ - u8 wp_pin; /* (SD) writeprotect detect */ - u8 vcc_pin; /* power switching (high == on) */ + int wp_pin; /* (SD) writeprotect detect */ + int vcc_pin; /* power switching (high == on) */ }; extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data); /* atmel-mci platform config */ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data); - /* Ethernet (EMAC & MACB) */ -struct at91_eth_data { - u32 phy_mask; - u8 phy_irq_pin; /* PHY IRQ */ - u8 is_rmii; /* using RMII interface? */ -}; -extern void __init at91_add_device_eth(struct at91_eth_data *data); - -#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) -#define eth_platform_data at91_eth_data -#endif +extern void __init at91_add_device_eth(struct macb_platform_data *data); /* USB Host */ struct at91_usbh_data { u8 ports; /* number of ports on root hub */ - u8 vbus_pin[2]; /* port power-control pin */ + int vbus_pin[2]; /* port power-control pin */ u8 vbus_pin_inverted; u8 overcurrent_supported; - u8 overcurrent_pin[2]; + int overcurrent_pin[2]; u8 overcurrent_status[2]; u8 overcurrent_changed[2]; }; @@ -110,9 +100,9 @@ extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data); /* NAND / SmartMedia */ struct atmel_nand_data { - u8 enable_pin; /* chip enable */ - u8 det_pin; /* card detect */ - u8 rdy_pin; /* ready/busy */ + int enable_pin; /* chip enable */ + int det_pin; /* card detect */ + int rdy_pin; /* ready/busy */ u8 rdy_pin_active_low; /* rdy_pin value is inverted */ u8 ale; /* address line number connected to ALE */ u8 cle; /* address line number connected to CLE */ diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S index 0ed8648c6452..c6bb9e2d9baa 100644 --- a/arch/arm/mach-at91/include/mach/debug-macro.S +++ b/arch/arm/mach-at91/include/mach/debug-macro.S @@ -14,9 +14,15 @@ #include <mach/hardware.h> #include <mach/at91_dbgu.h> +#if defined(CONFIG_AT91_DEBUG_LL_DBGU0) +#define AT91_DBGU AT91_BASE_DBGU0 +#else +#define AT91_DBGU AT91_BASE_DBGU1 +#endif + .macro addruart, rp, rv, tmp - ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) - ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) + ldr \rp, =AT91_DBGU @ System peripherals (phys address) + ldr \rv, =AT91_IO_P2V(AT91_DBGU) @ System peripherals (virt address) .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S index 7ab68f972227..423eea0ed74c 100644 --- a/arch/arm/mach-at91/include/mach/entry-macro.S +++ b/arch/arm/mach-at91/include/mach/entry-macro.S @@ -17,16 +17,17 @@ .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral + ldr \base, =at91_aic_base @ base virtual address of AIC peripheral + ldr \base, [\base] .endm .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt) - ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number - teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt - streq \tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)] @ not going to be handled further, then ACK it now. + ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt) + ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number + teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt + streq \tmp, [\base, #AT91_AIC_EOICR] @ not going to be handled further, then ACK it now. .endm diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index 2b9a1f51210f..e3fd225121c7 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -16,177 +16,175 @@ #include <linux/kernel.h> #include <asm/irq.h> -#define PIN_BASE NR_AIC_IRQS - #define MAX_GPIO_BANKS 5 -#define NR_BUILTIN_GPIO (PIN_BASE + (MAX_GPIO_BANKS * 32)) +#define NR_BUILTIN_GPIO (MAX_GPIO_BANKS * 32) /* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */ -#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0) -#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1) -#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2) -#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3) -#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4) -#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5) -#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6) -#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7) -#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8) -#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9) -#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10) -#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11) -#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12) -#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13) -#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14) -#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15) -#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16) -#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17) -#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18) -#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19) -#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20) -#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21) -#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22) -#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23) -#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24) -#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25) -#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26) -#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27) -#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28) -#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29) -#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30) -#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31) - -#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0) -#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1) -#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2) -#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3) -#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4) -#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5) -#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6) -#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7) -#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8) -#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9) -#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10) -#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11) -#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12) -#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13) -#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14) -#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15) -#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16) -#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17) -#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18) -#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19) -#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20) -#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21) -#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22) -#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23) -#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24) -#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25) -#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26) -#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27) -#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28) -#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29) -#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30) -#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31) - -#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0) -#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1) -#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2) -#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3) -#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4) -#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5) -#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6) -#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7) -#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8) -#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9) -#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10) -#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11) -#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12) -#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13) -#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14) -#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15) -#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16) -#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17) -#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18) -#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19) -#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20) -#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21) -#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22) -#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23) -#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24) -#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25) -#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26) -#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27) -#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28) -#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29) -#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30) -#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31) - -#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0) -#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1) -#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2) -#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3) -#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4) -#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5) -#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6) -#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7) -#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8) -#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9) -#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10) -#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11) -#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12) -#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13) -#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14) -#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15) -#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16) -#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17) -#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18) -#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19) -#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20) -#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21) -#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22) -#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23) -#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24) -#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25) -#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26) -#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27) -#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28) -#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29) -#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30) -#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31) - -#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0) -#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1) -#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2) -#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3) -#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4) -#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5) -#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6) -#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7) -#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8) -#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9) -#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10) -#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11) -#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12) -#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13) -#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14) -#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15) -#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16) -#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17) -#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18) -#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19) -#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20) -#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21) -#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22) -#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23) -#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24) -#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25) -#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26) -#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27) -#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28) -#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29) -#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30) -#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31) +#define AT91_PIN_PA0 (0x00 + 0) +#define AT91_PIN_PA1 (0x00 + 1) +#define AT91_PIN_PA2 (0x00 + 2) +#define AT91_PIN_PA3 (0x00 + 3) +#define AT91_PIN_PA4 (0x00 + 4) +#define AT91_PIN_PA5 (0x00 + 5) +#define AT91_PIN_PA6 (0x00 + 6) +#define AT91_PIN_PA7 (0x00 + 7) +#define AT91_PIN_PA8 (0x00 + 8) +#define AT91_PIN_PA9 (0x00 + 9) +#define AT91_PIN_PA10 (0x00 + 10) +#define AT91_PIN_PA11 (0x00 + 11) +#define AT91_PIN_PA12 (0x00 + 12) +#define AT91_PIN_PA13 (0x00 + 13) +#define AT91_PIN_PA14 (0x00 + 14) +#define AT91_PIN_PA15 (0x00 + 15) +#define AT91_PIN_PA16 (0x00 + 16) +#define AT91_PIN_PA17 (0x00 + 17) +#define AT91_PIN_PA18 (0x00 + 18) +#define AT91_PIN_PA19 (0x00 + 19) +#define AT91_PIN_PA20 (0x00 + 20) +#define AT91_PIN_PA21 (0x00 + 21) +#define AT91_PIN_PA22 (0x00 + 22) +#define AT91_PIN_PA23 (0x00 + 23) +#define AT91_PIN_PA24 (0x00 + 24) +#define AT91_PIN_PA25 (0x00 + 25) +#define AT91_PIN_PA26 (0x00 + 26) +#define AT91_PIN_PA27 (0x00 + 27) +#define AT91_PIN_PA28 (0x00 + 28) +#define AT91_PIN_PA29 (0x00 + 29) +#define AT91_PIN_PA30 (0x00 + 30) +#define AT91_PIN_PA31 (0x00 + 31) + +#define AT91_PIN_PB0 (0x20 + 0) +#define AT91_PIN_PB1 (0x20 + 1) +#define AT91_PIN_PB2 (0x20 + 2) +#define AT91_PIN_PB3 (0x20 + 3) +#define AT91_PIN_PB4 (0x20 + 4) +#define AT91_PIN_PB5 (0x20 + 5) +#define AT91_PIN_PB6 (0x20 + 6) +#define AT91_PIN_PB7 (0x20 + 7) +#define AT91_PIN_PB8 (0x20 + 8) +#define AT91_PIN_PB9 (0x20 + 9) +#define AT91_PIN_PB10 (0x20 + 10) +#define AT91_PIN_PB11 (0x20 + 11) +#define AT91_PIN_PB12 (0x20 + 12) +#define AT91_PIN_PB13 (0x20 + 13) +#define AT91_PIN_PB14 (0x20 + 14) +#define AT91_PIN_PB15 (0x20 + 15) +#define AT91_PIN_PB16 (0x20 + 16) +#define AT91_PIN_PB17 (0x20 + 17) +#define AT91_PIN_PB18 (0x20 + 18) +#define AT91_PIN_PB19 (0x20 + 19) +#define AT91_PIN_PB20 (0x20 + 20) +#define AT91_PIN_PB21 (0x20 + 21) +#define AT91_PIN_PB22 (0x20 + 22) +#define AT91_PIN_PB23 (0x20 + 23) +#define AT91_PIN_PB24 (0x20 + 24) +#define AT91_PIN_PB25 (0x20 + 25) +#define AT91_PIN_PB26 (0x20 + 26) +#define AT91_PIN_PB27 (0x20 + 27) +#define AT91_PIN_PB28 (0x20 + 28) +#define AT91_PIN_PB29 (0x20 + 29) +#define AT91_PIN_PB30 (0x20 + 30) +#define AT91_PIN_PB31 (0x20 + 31) + +#define AT91_PIN_PC0 (0x40 + 0) +#define AT91_PIN_PC1 (0x40 + 1) +#define AT91_PIN_PC2 (0x40 + 2) +#define AT91_PIN_PC3 (0x40 + 3) +#define AT91_PIN_PC4 (0x40 + 4) +#define AT91_PIN_PC5 (0x40 + 5) +#define AT91_PIN_PC6 (0x40 + 6) +#define AT91_PIN_PC7 (0x40 + 7) +#define AT91_PIN_PC8 (0x40 + 8) +#define AT91_PIN_PC9 (0x40 + 9) +#define AT91_PIN_PC10 (0x40 + 10) +#define AT91_PIN_PC11 (0x40 + 11) +#define AT91_PIN_PC12 (0x40 + 12) +#define AT91_PIN_PC13 (0x40 + 13) +#define AT91_PIN_PC14 (0x40 + 14) +#define AT91_PIN_PC15 (0x40 + 15) +#define AT91_PIN_PC16 (0x40 + 16) +#define AT91_PIN_PC17 (0x40 + 17) +#define AT91_PIN_PC18 (0x40 + 18) +#define AT91_PIN_PC19 (0x40 + 19) +#define AT91_PIN_PC20 (0x40 + 20) +#define AT91_PIN_PC21 (0x40 + 21) +#define AT91_PIN_PC22 (0x40 + 22) +#define AT91_PIN_PC23 (0x40 + 23) +#define AT91_PIN_PC24 (0x40 + 24) +#define AT91_PIN_PC25 (0x40 + 25) +#define AT91_PIN_PC26 (0x40 + 26) +#define AT91_PIN_PC27 (0x40 + 27) +#define AT91_PIN_PC28 (0x40 + 28) +#define AT91_PIN_PC29 (0x40 + 29) +#define AT91_PIN_PC30 (0x40 + 30) +#define AT91_PIN_PC31 (0x40 + 31) + +#define AT91_PIN_PD0 (0x60 + 0) +#define AT91_PIN_PD1 (0x60 + 1) +#define AT91_PIN_PD2 (0x60 + 2) +#define AT91_PIN_PD3 (0x60 + 3) +#define AT91_PIN_PD4 (0x60 + 4) +#define AT91_PIN_PD5 (0x60 + 5) +#define AT91_PIN_PD6 (0x60 + 6) +#define AT91_PIN_PD7 (0x60 + 7) +#define AT91_PIN_PD8 (0x60 + 8) +#define AT91_PIN_PD9 (0x60 + 9) +#define AT91_PIN_PD10 (0x60 + 10) +#define AT91_PIN_PD11 (0x60 + 11) +#define AT91_PIN_PD12 (0x60 + 12) +#define AT91_PIN_PD13 (0x60 + 13) +#define AT91_PIN_PD14 (0x60 + 14) +#define AT91_PIN_PD15 (0x60 + 15) +#define AT91_PIN_PD16 (0x60 + 16) +#define AT91_PIN_PD17 (0x60 + 17) +#define AT91_PIN_PD18 (0x60 + 18) +#define AT91_PIN_PD19 (0x60 + 19) +#define AT91_PIN_PD20 (0x60 + 20) +#define AT91_PIN_PD21 (0x60 + 21) +#define AT91_PIN_PD22 (0x60 + 22) +#define AT91_PIN_PD23 (0x60 + 23) +#define AT91_PIN_PD24 (0x60 + 24) +#define AT91_PIN_PD25 (0x60 + 25) +#define AT91_PIN_PD26 (0x60 + 26) +#define AT91_PIN_PD27 (0x60 + 27) +#define AT91_PIN_PD28 (0x60 + 28) +#define AT91_PIN_PD29 (0x60 + 29) +#define AT91_PIN_PD30 (0x60 + 30) +#define AT91_PIN_PD31 (0x60 + 31) + +#define AT91_PIN_PE0 (0x80 + 0) +#define AT91_PIN_PE1 (0x80 + 1) +#define AT91_PIN_PE2 (0x80 + 2) +#define AT91_PIN_PE3 (0x80 + 3) +#define AT91_PIN_PE4 (0x80 + 4) +#define AT91_PIN_PE5 (0x80 + 5) +#define AT91_PIN_PE6 (0x80 + 6) +#define AT91_PIN_PE7 (0x80 + 7) +#define AT91_PIN_PE8 (0x80 + 8) +#define AT91_PIN_PE9 (0x80 + 9) +#define AT91_PIN_PE10 (0x80 + 10) +#define AT91_PIN_PE11 (0x80 + 11) +#define AT91_PIN_PE12 (0x80 + 12) +#define AT91_PIN_PE13 (0x80 + 13) +#define AT91_PIN_PE14 (0x80 + 14) +#define AT91_PIN_PE15 (0x80 + 15) +#define AT91_PIN_PE16 (0x80 + 16) +#define AT91_PIN_PE17 (0x80 + 17) +#define AT91_PIN_PE18 (0x80 + 18) +#define AT91_PIN_PE19 (0x80 + 19) +#define AT91_PIN_PE20 (0x80 + 20) +#define AT91_PIN_PE21 (0x80 + 21) +#define AT91_PIN_PE22 (0x80 + 22) +#define AT91_PIN_PE23 (0x80 + 23) +#define AT91_PIN_PE24 (0x80 + 24) +#define AT91_PIN_PE25 (0x80 + 25) +#define AT91_PIN_PE26 (0x80 + 26) +#define AT91_PIN_PE27 (0x80 + 27) +#define AT91_PIN_PE28 (0x80 + 28) +#define AT91_PIN_PE29 (0x80 + 29) +#define AT91_PIN_PE30 (0x80 + 30) +#define AT91_PIN_PE31 (0x80 + 31) #ifndef __ASSEMBLY__ /* setup setup routines, called from board init or driver probe() */ @@ -215,8 +213,8 @@ extern void at91_gpio_resume(void); #include <asm/errno.h> -#define gpio_to_irq(gpio) (gpio) -#define irq_to_gpio(irq) (irq) +#define gpio_to_irq(gpio) (gpio + NR_AIC_IRQS) +#define irq_to_gpio(irq) (irq - NR_AIC_IRQS) #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 483478d8be6b..2d0e4e998566 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -16,6 +16,12 @@ #include <asm/sizes.h> +/* DBGU base */ +/* rm9200, 9260/9g20, 9261/9g10, 9rl */ +#define AT91_BASE_DBGU0 0xfffff200 +/* 9263, 9g45, cap9 */ +#define AT91_BASE_DBGU1 0xffffee00 + #if defined(CONFIG_ARCH_AT91RM9200) #include <mach/at91rm9200.h> #elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) @@ -52,6 +58,12 @@ #endif /* + * On all at91 have the Advanced Interrupt Controller starts at address + * 0xfffff000 + */ +#define AT91_AIC 0xfffff000 + +/* * Peripheral identifiers/interrupts. */ #define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h index 4298e7806c76..4ca09ef7ca29 100644 --- a/arch/arm/mach-at91/include/mach/io.h +++ b/arch/arm/mach-at91/include/mach/io.h @@ -30,14 +30,6 @@ #ifndef __ASSEMBLY__ -#ifndef CONFIG_ARCH_AT91X40 -#define __arch_ioremap at91_ioremap -#define __arch_iounmap at91_iounmap -#endif - -void __iomem *at91_ioremap(unsigned long phys, size_t size, unsigned int type); -void at91_iounmap(volatile void __iomem *addr); - static inline unsigned int at91_sys_read(unsigned int reg_offset) { void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h index 36bd55f3fc6e..ac8b7dfc85ef 100644 --- a/arch/arm/mach-at91/include/mach/irqs.h +++ b/arch/arm/mach-at91/include/mach/irqs.h @@ -31,7 +31,7 @@ * Acknowledge interrupt with AIC after interrupt has been handled. * (by kernel/irq.c) */ -#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0) +#define irq_finish(irq) do { at91_aic_write(AT91_AIC_EOICR, 0); } while (0) /* diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h index 36af14bc13bb..cbd64f3bcecd 100644 --- a/arch/arm/mach-at91/include/mach/system.h +++ b/arch/arm/mach-at91/include/mach/system.h @@ -47,13 +47,4 @@ static inline void arch_idle(void) #endif } -void (*at91_arch_reset)(void); - -static inline void arch_reset(char mode, const char *cmd) -{ - /* call the CPU-specific reset function */ - if (at91_arch_reset) - (at91_arch_reset)(); -} - #endif diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h index 8f4866045b41..ec164a4124c9 100644 --- a/arch/arm/mach-at91/include/mach/system_rev.h +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -19,7 +19,7 @@ #define BOARD_HAVE_NAND_16BIT (1 << 31) static inline int board_have_nand_16bit(void) { - return system_rev & BOARD_HAVE_NAND_16BIT; + return (system_rev & BOARD_HAVE_NAND_16BIT) ? 1 : 0; } #endif /* __ARCH_SYSTEM_REV_H__ */ diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h index 85820ad801cc..5e917a66edd7 100644 --- a/arch/arm/mach-at91/include/mach/timex.h +++ b/arch/arm/mach-at91/include/mach/timex.h @@ -23,70 +23,15 @@ #include <mach/hardware.h> -#if defined(CONFIG_ARCH_AT91RM9200) +#ifdef CONFIG_ARCH_AT91X40 -#define CLOCK_TICK_RATE (AT91_SLOW_CLOCK) - -#elif defined(CONFIG_ARCH_AT91SAM9260) - -#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260) -#define AT91SAM9_MASTER_CLOCK 90000000 -#else -#define AT91SAM9_MASTER_CLOCK 99300000 -#endif - -#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91SAM9261) - -#define AT91SAM9_MASTER_CLOCK 99300000 -#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91SAM9G10) - -#define AT91SAM9_MASTER_CLOCK 133000000 -#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91SAM9263) - -#if defined(CONFIG_MACH_USB_A9263) -#define AT91SAM9_MASTER_CLOCK 90000000 -#else -#define AT91SAM9_MASTER_CLOCK 99959500 -#endif - -#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91SAM9RL) - -#define AT91SAM9_MASTER_CLOCK 100000000 -#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91SAM9G20) +#define AT91X40_MASTER_CLOCK 40000000 +#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK) -#if defined(CONFIG_MACH_USB_A9G20) -#define AT91SAM9_MASTER_CLOCK 133000000 #else -#define AT91SAM9_MASTER_CLOCK 132096000 -#endif - -#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91SAM9G45) -#define AT91SAM9_MASTER_CLOCK 133333333 -#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91CAP9) - -#define AT91CAP9_MASTER_CLOCK 100000000 -#define CLOCK_TICK_RATE (AT91CAP9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91X40) - -#define AT91X40_MASTER_CLOCK 40000000 -#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK) +#define CLOCK_TICK_RATE 12345678 #endif -#endif +#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h index 18bdcdeb474f..0234fd9d20d6 100644 --- a/arch/arm/mach-at91/include/mach/uncompress.h +++ b/arch/arm/mach-at91/include/mach/uncompress.h @@ -24,8 +24,10 @@ #include <linux/io.h> #include <linux/atmel_serial.h> -#if defined(CONFIG_AT91_EARLY_DBGU) -#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS) +#if defined(CONFIG_AT91_EARLY_DBGU0) +#define UART_OFFSET AT91_BASE_DBGU0 +#elif defined(CONFIG_AT91_EARLY_DBGU1) +#define UART_OFFSET AT91_BASE_DBGU1 #elif defined(CONFIG_AT91_EARLY_USART0) #define UART_OFFSET AT91_USART0 #elif defined(CONFIG_AT91_EARLY_USART1) diff --git a/arch/arm/mach-at91/include/mach/vmalloc.h b/arch/arm/mach-at91/include/mach/vmalloc.h deleted file mode 100644 index 8e4a1bd0ab1d..000000000000 --- a/arch/arm/mach-at91/include/mach/vmalloc.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/vmalloc.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#include <mach/hardware.h> - -#define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK) - -#endif diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index 9665265ec757..be6b639ecd7b 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -33,17 +33,18 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> +void __iomem *at91_aic_base; static void at91_aic_mask_irq(struct irq_data *d) { /* Disable interrupt on AIC */ - at91_sys_write(AT91_AIC_IDCR, 1 << d->irq); + at91_aic_write(AT91_AIC_IDCR, 1 << d->irq); } static void at91_aic_unmask_irq(struct irq_data *d) { /* Enable interrupt on AIC */ - at91_sys_write(AT91_AIC_IECR, 1 << d->irq); + at91_aic_write(AT91_AIC_IECR, 1 << d->irq); } unsigned int at91_extern_irq; @@ -77,8 +78,8 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type) return -EINVAL; } - smr = at91_sys_read(AT91_AIC_SMR(d->irq)) & ~AT91_AIC_SRCTYPE; - at91_sys_write(AT91_AIC_SMR(d->irq), smr | srctype); + smr = at91_aic_read(AT91_AIC_SMR(d->irq)) & ~AT91_AIC_SRCTYPE; + at91_aic_write(AT91_AIC_SMR(d->irq), smr | srctype); return 0; } @@ -102,15 +103,15 @@ static int at91_aic_set_wake(struct irq_data *d, unsigned value) void at91_irq_suspend(void) { - backups = at91_sys_read(AT91_AIC_IMR); - at91_sys_write(AT91_AIC_IDCR, backups); - at91_sys_write(AT91_AIC_IECR, wakeups); + backups = at91_aic_read(AT91_AIC_IMR); + at91_aic_write(AT91_AIC_IDCR, backups); + at91_aic_write(AT91_AIC_IECR, wakeups); } void at91_irq_resume(void) { - at91_sys_write(AT91_AIC_IDCR, wakeups); - at91_sys_write(AT91_AIC_IECR, backups); + at91_aic_write(AT91_AIC_IDCR, wakeups); + at91_aic_write(AT91_AIC_IECR, backups); } #else @@ -133,34 +134,39 @@ void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS]) { unsigned int i; + at91_aic_base = ioremap(AT91_AIC, 512); + + if (!at91_aic_base) + panic("Impossible to ioremap AT91_AIC\n"); + /* * The IVR is used by macro get_irqnr_and_base to read and verify. * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred. */ for (i = 0; i < NR_AIC_IRQS; i++) { /* Put irq number in Source Vector Register: */ - at91_sys_write(AT91_AIC_SVR(i), i); + at91_aic_write(AT91_AIC_SVR(i), i); /* Active Low interrupt, with the specified priority */ - at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]); + at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]); irq_set_chip_and_handler(i, &at91_aic_chip, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); /* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */ if (i < 8) - at91_sys_write(AT91_AIC_EOICR, 0); + at91_aic_write(AT91_AIC_EOICR, 0); } /* * Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS * When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU */ - at91_sys_write(AT91_AIC_SPU, NR_AIC_IRQS); + at91_aic_write(AT91_AIC_SPU, NR_AIC_IRQS); /* No debugging in AIC: Debug (Protect) Control Register */ - at91_sys_write(AT91_AIC_DCR, 0); + at91_aic_write(AT91_AIC_DCR, 0); /* Disable and clear all interrupts initially */ - at91_sys_write(AT91_AIC_IDCR, 0xFFFFFFFF); - at91_sys_write(AT91_AIC_ICCR, 0xFFFFFFFF); + at91_aic_write(AT91_AIC_IDCR, 0xFFFFFFFF); + at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF); } diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 7046158109d7..62ad95556c36 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -34,7 +34,7 @@ /* * Show the reason for the previous system reset. */ -#if defined(AT91_SHDWC) +#if defined(AT91_RSTC) #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> @@ -58,8 +58,11 @@ static void __init show_reset_status(void) char *reason, *r2 = reset; u32 reset_type, wake_type; + if (!at91_shdwc_base) + return; + reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP; - wake_type = at91_sys_read(AT91_SHDW_SR); + wake_type = at91_shdwc_read(AT91_SHDW_SR); switch (reset_type) { case AT91_RSTC_RSTTYP_GENERAL: @@ -215,7 +218,7 @@ static int at91_pm_enter(suspend_state_t state) | (1 << AT91_ID_FIQ) | (1 << AT91_ID_SYS) | (at91_extern_irq)) - & at91_sys_read(AT91_AIC_IMR), + & at91_aic_read(AT91_AIC_IMR), state); switch (state) { @@ -283,7 +286,7 @@ static int at91_pm_enter(suspend_state_t state) } pr_debug("AT91: PM - wakeup %08x\n", - at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR)); + at91_aic_read(AT91_AIC_IPR) & at91_aic_read(AT91_AIC_IMR)); error: target_state = PM_SUSPEND_ON; diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c index 5eab6aa621d0..8294783b679d 100644 --- a/arch/arm/mach-at91/sam9_smc.c +++ b/arch/arm/mach-at91/sam9_smc.c @@ -10,38 +10,58 @@ #include <linux/module.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" -void __init sam9_smc_configure(int cs, struct sam9_smc_config* config) + +#define AT91_SMC_CS(id, n) (smc_base_addr[id] + ((n) * 0x10)) + +static void __iomem *smc_base_addr[2]; + +static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config) { + /* Setup register */ - at91_sys_write(AT91_SMC_SETUP(cs), - AT91_SMC_NWESETUP_(config->nwe_setup) - | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup) - | AT91_SMC_NRDSETUP_(config->nrd_setup) - | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup) - ); + __raw_writel(AT91_SMC_NWESETUP_(config->nwe_setup) + | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup) + | AT91_SMC_NRDSETUP_(config->nrd_setup) + | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup), + base + AT91_SMC_SETUP); /* Pulse register */ - at91_sys_write(AT91_SMC_PULSE(cs), - AT91_SMC_NWEPULSE_(config->nwe_pulse) - | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse) - | AT91_SMC_NRDPULSE_(config->nrd_pulse) - | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse) - ); + __raw_writel(AT91_SMC_NWEPULSE_(config->nwe_pulse) + | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse) + | AT91_SMC_NRDPULSE_(config->nrd_pulse) + | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse), + base + AT91_SMC_PULSE); /* Cycle register */ - at91_sys_write(AT91_SMC_CYCLE(cs), - AT91_SMC_NWECYCLE_(config->write_cycle) - | AT91_SMC_NRDCYCLE_(config->read_cycle) - ); + __raw_writel(AT91_SMC_NWECYCLE_(config->write_cycle) + | AT91_SMC_NRDCYCLE_(config->read_cycle), + base + AT91_SMC_CYCLE); /* Mode register */ - at91_sys_write(AT91_SMC_MODE(cs), - config->mode - | AT91_SMC_TDF_(config->tdf_cycles) - ); + __raw_writel(config->mode + | AT91_SMC_TDF_(config->tdf_cycles), + base + AT91_SMC_MODE); +} + +void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config) +{ + sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config); +} + +void __init at91sam9_ioremap_smc(int id, u32 addr) +{ + if (id > 1) { + pr_warn("%s: id > 2\n", __func__); + return; + } + smc_base_addr[id] = ioremap(addr, 512); + if (!smc_base_addr[id]) + pr_warn("Impossible to ioremap smc.%d 0x%x\n", id, addr); } diff --git a/arch/arm/mach-at91/sam9_smc.h b/arch/arm/mach-at91/sam9_smc.h index bf72cfb3455b..039c5ce17aec 100644 --- a/arch/arm/mach-at91/sam9_smc.h +++ b/arch/arm/mach-at91/sam9_smc.h @@ -30,4 +30,5 @@ struct sam9_smc_config { u8 tdf_cycles:4; }; -extern void __init sam9_smc_configure(int cs, struct sam9_smc_config* config); +extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config); +extern void __init at91sam9_ioremap_smc(int id, u32 addr); diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index aa64294c7db3..8bdcc3cb6012 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -8,6 +8,7 @@ #include <linux/module.h> #include <linux/io.h> #include <linux/mm.h> +#include <linux/pm.h> #include <asm/mach/map.h> @@ -15,6 +16,7 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91_pmc.h> +#include <mach/at91_shdwc.h> #include "soc.h" #include "generic.h" @@ -73,27 +75,6 @@ static struct map_desc at91_io_desc __initdata = { .type = MT_DEVICE, }; -void __iomem *at91_ioremap(unsigned long p, size_t size, unsigned int type) -{ - if (p >= AT91_BASE_SYS && p <= (AT91_BASE_SYS + SZ_16K - 1)) - return (void __iomem *)AT91_IO_P2V(p); - - return __arm_ioremap_caller(p, size, type, __builtin_return_address(0)); -} -EXPORT_SYMBOL(at91_ioremap); - -void at91_iounmap(volatile void __iomem *addr) -{ - unsigned long virt = (unsigned long)addr; - - if (virt >= VMALLOC_START && virt < VMALLOC_END) - __iounmap(addr); -} -EXPORT_SYMBOL(at91_iounmap); - -#define AT91_DBGU0 0xfffff200 -#define AT91_DBGU1 0xffffee00 - static void __init soc_detect(u32 dbgu_base) { u32 cidr, socid; @@ -266,9 +247,9 @@ void __init at91_map_io(void) at91_soc_initdata.type = AT91_SOC_NONE; at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - soc_detect(AT91_DBGU0); + soc_detect(AT91_BASE_DBGU0); if (!at91_soc_is_detected()) - soc_detect(AT91_DBGU1); + soc_detect(AT91_BASE_DBGU1); if (!at91_soc_is_detected()) panic("AT91: Impossible to detect the SOC type"); @@ -285,8 +266,25 @@ void __init at91_map_io(void) at91_boot_soc.map_io(); } +void __iomem *at91_shdwc_base = NULL; + +static void at91sam9_poweroff(void) +{ + at91_shdwc_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); +} + +void __init at91_ioremap_shdwc(u32 base_addr) +{ + at91_shdwc_base = ioremap(base_addr, 16); + if (!at91_shdwc_base) + panic("Impossible to ioremap at91_shdwc_base\n"); + pm_power_off = at91sam9_poweroff; +} + void __init at91_initialize(unsigned long main_clock) { + at91_boot_soc.ioremap_registers(); + /* Init clock subsystem */ at91_clock_init(main_clock); diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index 21ed8816e6f7..4588ae6f7acd 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -7,6 +7,7 @@ struct at91_init_soc { unsigned int *default_irq_priority; void (*map_io)(void); + void (*ioremap_registers)(void); void (*register_clocks)(void); void (*init)(void); }; diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c index 31a143592c81..9e5e7552498c 100644 --- a/arch/arm/mach-bcmring/arch.c +++ b/arch/arm/mach-bcmring/arch.c @@ -49,7 +49,29 @@ HW_DECLARE_SPINLOCK(gpio) #endif /* sysctl */ -int bcmring_arch_warm_reboot; /* do a warm reboot on hard reset */ +static int bcmring_arch_warm_reboot; /* do a warm reboot on hard reset */ + +static void bcmring_restart(char mode, const char *cmd) +{ + printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot); + + if (mode == 'h') { + /* Reboot configured in proc entry */ + if (bcmring_arch_warm_reboot) { + printk("warm reset\n"); + /* Issue Warm reset (do not reset ethernet switch, keep alive) */ + chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM); + } else { + /* Force reset of everything */ + printk("force reset\n"); + chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT); + } + } else { + /* Force reset of everything */ + printk("force reset\n"); + chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT); + } +} static struct ctl_table_header *bcmring_sysctl_header; @@ -173,4 +195,5 @@ MACHINE_START(BCMRING, "BCMRING") .init_irq = bcmring_init_irq, .timer = &bcmring_timer, .init_machine = bcmring_init_machine + .restart = bcmring_restart, MACHINE_END diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index 430da120a297..6b67b7e8426c 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -25,7 +25,6 @@ #include <linux/device.h> #include <linux/dma-mapping.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> #include <linux/interrupt.h> #include <linux/amba/bus.h> #include <linux/clkdev.h> diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c index f4d4d6d174d0..1a1a27dd5654 100644 --- a/arch/arm/mach-bcmring/dma.c +++ b/arch/arm/mach-bcmring/dma.c @@ -1615,7 +1615,7 @@ DMA_MemType_t dma_mem_type(void *addr) { unsigned long addrVal = (unsigned long)addr; - if (addrVal >= VMALLOC_END) { + if (addrVal >= CONSISTENT_BASE) { /* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */ /* dma_alloc_xxx pages are physically and virtually contiguous */ diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h index 38b37060d426..cb78250db649 100644 --- a/arch/arm/mach-bcmring/include/mach/system.h +++ b/arch/arm/mach-bcmring/include/mach/system.h @@ -20,35 +20,9 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <mach/csp/chipcHw_inline.h> - -extern int bcmring_arch_warm_reboot; - static inline void arch_idle(void) { cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ - printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot); - - if (mode == 'h') { - /* Reboot configured in proc entry */ - if (bcmring_arch_warm_reboot) { - printk("warm reset\n"); - /* Issue Warm reset (do not reset ethernet switch, keep alive) */ - chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM); - } else { - /* Force reset of everything */ - printk("force reset\n"); - chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT); - } - } else { - /* Force reset of everything */ - printk("force reset\n"); - chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT); - } -} - #endif diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h deleted file mode 100644 index 7397bd7817d9..000000000000 --- a/arch/arm/mach-bcmring/include/mach/vmalloc.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * Move VMALLOC_END to 0xf0000000 so that the vm space can range from - * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles - * larger physical memory designs better. - */ -#define VMALLOC_END 0xf0000000UL diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile index 4a197315f0cf..f2f0256232e3 100644 --- a/arch/arm/mach-clps711x/Makefile +++ b/arch/arm/mach-clps711x/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := irq.o mm.o time.o +obj-y := common.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index 0276091b7f86..3fb79a1d0bde 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -68,5 +68,6 @@ MACHINE_START(AUTCPU12, "autronix autcpu12") .map_io = autcpu12_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, + .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c index 25b3bfd0e85a..c314f49d6ef6 100644 --- a/arch/arm/mach-clps711x/cdb89712.c +++ b/arch/arm/mach-clps711x/cdb89712.c @@ -59,4 +59,5 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712") .map_io = cdb89712_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, + .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c index 1df9ec67aa92..a70147e347ac 100644 --- a/arch/arm/mach-clps711x/ceiva.c +++ b/arch/arm/mach-clps711x/ceiva.c @@ -60,4 +60,5 @@ MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame") .map_io = ceiva_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, + .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c index 80496c09ac59..dbc7842639dc 100644 --- a/arch/arm/mach-clps711x/clep7312.c +++ b/arch/arm/mach-clps711x/clep7312.c @@ -41,5 +41,6 @@ MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, + .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/irq.c b/arch/arm/mach-clps711x/common.c index c2eceee645e3..ab1711b9b4d6 100644 --- a/arch/arm/mach-clps711x/irq.c +++ b/arch/arm/mach-clps711x/common.c @@ -1,7 +1,9 @@ /* - * linux/arch/arm/mach-clps711x/irq.c + * linux/arch/arm/mach-clps711x/core.c * - * Copyright (C) 2000 Deep Blue Solutions Ltd. + * Core support for the CLPS711x-based machines. + * + * Copyright (C) 2001,2011 Deep Blue Solutions Ltd * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,16 +19,42 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/kernel.h> +#include <linux/mm.h> #include <linux/init.h> -#include <linux/list.h> +#include <linux/interrupt.h> #include <linux/io.h> +#include <linux/irq.h> +#include <linux/sched.h> +#include <linux/timex.h> -#include <asm/mach/irq.h> +#include <asm/sizes.h> #include <mach/hardware.h> #include <asm/irq.h> - +#include <asm/leds.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> #include <asm/hardware/clps7111.h> +/* + * This maps the generic CLPS711x registers + */ +static struct map_desc clps711x_io_desc[] __initdata = { + { + .virtual = CLPS7111_VIRT_BASE, + .pfn = __phys_to_pfn(CLPS7111_PHYS_BASE), + .length = SZ_1M, + .type = MT_DEVICE + } +}; + +void __init clps711x_map_io(void) +{ + iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc)); +} + static void int1_mask(struct irq_data *d) { u32 intmr1; @@ -112,15 +140,15 @@ void __init clps711x_init_irq(void) for (i = 0; i < NR_IRQS; i++) { if (INT1_IRQS & (1 << i)) { - irq_set_chip_and_handler(i, &int1_chip, + irq_set_chip_and_handler(i, &int1_chip, handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } if (INT2_IRQS & (1 << i)) { irq_set_chip_and_handler(i, &int2_chip, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } + } } /* @@ -141,3 +169,59 @@ void __init clps711x_init_irq(void) clps_writel(0, SYNCIO); clps_writel(0, KBDEOI); } + +/* + * gettimeoffset() returns time since last timer tick, in usecs. + * + * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy. + * 'tick' is usecs per jiffy. + */ +static unsigned long clps711x_gettimeoffset(void) +{ + unsigned long hwticks; + hwticks = LATCH - (clps_readl(TC2D) & 0xffff); /* since last underflow */ + return (hwticks * (tick_nsec / 1000)) / LATCH; +} + +/* + * IRQ handler for the timer + */ +static irqreturn_t p720t_timer_interrupt(int irq, void *dev_id) +{ + timer_tick(); + return IRQ_HANDLED; +} + +static struct irqaction clps711x_timer_irq = { + .name = "CLPS711x Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = p720t_timer_interrupt, +}; + +static void __init clps711x_timer_init(void) +{ + struct timespec tv; + unsigned int syscon; + + syscon = clps_readl(SYSCON1); + syscon |= SYSCON1_TC2S | SYSCON1_TC2M; + clps_writel(syscon, SYSCON1); + + clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */ + + setup_irq(IRQ_TC2OI, &clps711x_timer_irq); + + tv.tv_nsec = 0; + tv.tv_sec = clps_readl(RTCDR); + do_settimeofday(&tv); +} + +struct sys_timer clps711x_timer = { + .init = clps711x_timer_init, + .offset = clps711x_gettimeoffset, +}; + +void clps711x_restart(char mode, const char *cmd) +{ + soft_restart(0); +} diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h index 2b8b801f1dc3..fc0f0650dcb5 100644 --- a/arch/arm/mach-clps711x/common.h +++ b/arch/arm/mach-clps711x/common.h @@ -9,3 +9,4 @@ struct sys_timer; extern void clps711x_map_io(void); extern void clps711x_init_irq(void); extern struct sys_timer clps711x_timer; +extern void clps711x_restart(char mode, const char *cmd); diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c index 9721f6111dc0..5fad0b4f40ad 100644 --- a/arch/arm/mach-clps711x/edb7211-arch.c +++ b/arch/arm/mach-clps711x/edb7211-arch.c @@ -62,4 +62,5 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") .reserve = edb7211_reserve, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, + .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c index d99256687298..3a3f0b702cb4 100644 --- a/arch/arm/mach-clps711x/fortunet.c +++ b/arch/arm/mach-clps711x/fortunet.c @@ -78,4 +78,5 @@ MACHINE_START(FORTUNET, "ARM-FortuNet") .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, + .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h index f916cd7a477d..23d6ef8c84da 100644 --- a/arch/arm/mach-clps711x/include/mach/system.h +++ b/arch/arm/mach-clps711x/include/mach/system.h @@ -32,9 +32,4 @@ static inline void arch_idle(void) mov r0, r0"); } -static inline void arch_reset(char mode, const char *cmd) -{ - cpu_reset(0); -} - #endif diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h deleted file mode 100644 index 467b96137e47..000000000000 --- a/arch/arm/mach-clps711x/include/mach/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-clps711x/include/mach/vmalloc.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END 0xd0000000UL diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c deleted file mode 100644 index 986592176767..000000000000 --- a/arch/arm/mach-clps711x/mm.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/mm.c - * - * Generic MM setup for the CLPS711x-based machines. - * - * Copyright (C) 2001 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/init.h> - -#include <asm/sizes.h> -#include <mach/hardware.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/mach/map.h> -#include <asm/hardware/clps7111.h> - -/* - * This maps the generic CLPS711x registers - */ -static struct map_desc clps711x_io_desc[] __initdata = { - { - .virtual = CLPS7111_VIRT_BASE, - .pfn = __phys_to_pfn(CLPS7111_PHYS_BASE), - .length = SZ_1M, - .type = MT_DEVICE - } -}; - -void __init clps711x_map_io(void) -{ - iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc)); -} diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index 6ecea95f38b2..42ee8f33eafb 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -93,6 +93,7 @@ MACHINE_START(P720T, "ARM-Prospector720T") .map_io = p720t_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, + .restart = clps711x_restart, MACHINE_END static int p720t_hw_init(void) diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c deleted file mode 100644 index d581ef0bcd24..000000000000 --- a/arch/arm/mach-clps711x/time.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/time.c - * - * Copyright (C) 2001 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/timex.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/sched.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/leds.h> -#include <asm/hardware/clps7111.h> - -#include <asm/mach/time.h> - - -/* - * gettimeoffset() returns time since last timer tick, in usecs. - * - * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy. - * 'tick' is usecs per jiffy. - */ -static unsigned long clps711x_gettimeoffset(void) -{ - unsigned long hwticks; - hwticks = LATCH - (clps_readl(TC2D) & 0xffff); /* since last underflow */ - return (hwticks * (tick_nsec / 1000)) / LATCH; -} - -/* - * IRQ handler for the timer - */ -static irqreturn_t -p720t_timer_interrupt(int irq, void *dev_id) -{ - timer_tick(); - return IRQ_HANDLED; -} - -static struct irqaction clps711x_timer_irq = { - .name = "CLPS711x Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = p720t_timer_interrupt, -}; - -static void __init clps711x_timer_init(void) -{ - struct timespec tv; - unsigned int syscon; - - syscon = clps_readl(SYSCON1); - syscon |= SYSCON1_TC2S | SYSCON1_TC2M; - clps_writel(syscon, SYSCON1); - - clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */ - - setup_irq(IRQ_TC2OI, &clps711x_timer_irq); - - tv.tv_nsec = 0; - tv.tv_sec = clps_readl(RTCDR); - do_settimeofday(&tv); -} - -struct sys_timer clps711x_timer = { - .init = clps711x_timer_init, - .offset = clps711x_gettimeoffset, -}; diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index 55f7b4b08ab9..2c5fb4c7e509 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -26,6 +26,7 @@ #include <linux/mtd/partitions.h> #include <asm/setup.h> #include <asm/mach-types.h> +#include <asm/hardware/gic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> @@ -201,5 +202,7 @@ MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board") .map_io = cns3420_map_io, .init_irq = cns3xxx_init_irq, .timer = &cns3xxx_timer, + .handle_irq = gic_handle_irq, .init_machine = cns3420_init, + .restart = cns3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h index fcd225343c61..4894b8c17151 100644 --- a/arch/arm/mach-cns3xxx/core.h +++ b/arch/arm/mach-cns3xxx/core.h @@ -22,5 +22,6 @@ static inline void cns3xxx_l2x0_init(void) {} void __init cns3xxx_map_io(void); void __init cns3xxx_init_irq(void); void cns3xxx_power_off(void); +void cns3xxx_restart(char, const char *); #endif /* __CNS3XXX_CORE_H */ diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S index d87bfc397d39..01c57df5f716 100644 --- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S +++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S @@ -8,8 +8,6 @@ * published by the Free Software Foundation. */ -#include <asm/hardware/entry-macro-gic.S> - .macro disable_fiq .endm diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h index 4f16c9b79f78..9e56b7dc133a 100644 --- a/arch/arm/mach-cns3xxx/include/mach/system.h +++ b/arch/arm/mach-cns3xxx/include/mach/system.h @@ -11,7 +11,6 @@ #ifndef __MACH_SYSTEM_H #define __MACH_SYSTEM_H -#include <linux/io.h> #include <asm/proc-fns.h> static inline void arch_idle(void) @@ -23,6 +22,4 @@ static inline void arch_idle(void) cpu_do_idle(); } -void arch_reset(char mode, const char *cmd); - #endif diff --git a/arch/arm/mach-cns3xxx/include/mach/vmalloc.h b/arch/arm/mach-cns3xxx/include/mach/vmalloc.h deleted file mode 100644 index 1dd231d2f772..000000000000 --- a/arch/arm/mach-cns3xxx/include/mach/vmalloc.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * Copyright 2000 Russell King. - * Copyright 2003 ARM Limited - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#define VMALLOC_END 0xd8000000UL diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 0f8fca48a5ed..e159d69967c9 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -151,13 +151,12 @@ static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys) struct cns3xxx_pcie *cnspci = sysdata_to_cnspci(sys); struct resource *res_io = &cnspci->res_io; struct resource *res_mem = &cnspci->res_mem; - struct resource **sysres = sys->resource; BUG_ON(request_resource(&iomem_resource, res_io) || request_resource(&iomem_resource, res_mem)); - sysres[0] = res_io; - sysres[1] = res_mem; + pci_add_resource(&sys->resources, res_io); + pci_add_resource(&sys->resources, res_mem); return 1; } @@ -169,7 +168,8 @@ static struct pci_ops cns3xxx_pcie_ops = { static struct pci_bus *cns3xxx_pci_scan_bus(int nr, struct pci_sys_data *sys) { - return pci_scan_bus(sys->busnr, &cns3xxx_pcie_ops, sys); + return pci_scan_root_bus(NULL, sys->busnr, &cns3xxx_pcie_ops, sys, + &sys->resources); } static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c index 0c04678615ce..36458080332a 100644 --- a/arch/arm/mach-cns3xxx/pm.c +++ b/arch/arm/mach-cns3xxx/pm.c @@ -11,9 +11,9 @@ #include <linux/io.h> #include <linux/delay.h> #include <linux/atomic.h> -#include <mach/system.h> #include <mach/cns3xxx.h> #include <mach/pm.h> +#include "core.h" void cns3xxx_pwr_clk_en(unsigned int block) { @@ -89,7 +89,7 @@ void cns3xxx_pwr_soft_rst(unsigned int block) } EXPORT_SYMBOL(cns3xxx_pwr_soft_rst); -void arch_reset(char mode, const char *cmd) +void cns3xxx_restart(char mode, const char *cmd) { /* * To reset, we hit the on-board reset register diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 495e31306fc0..2db78bd5c835 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -4,7 +4,7 @@ # # Common objects -obj-y := time.o clock.o serial.o io.o psc.o \ +obj-y := time.o clock.o serial.o psc.o \ dma.o usb.o common.o sram.o aemif.o obj-$(CONFIG_DAVINCI_MUX) += mux.o diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 11c3db985285..dc1afe5be20c 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -682,4 +682,5 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM") .timer = &davinci_timer, .init_machine = da830_evm_init, .dma_zone_size = SZ_128M, + .restart = da8xx_restart, MACHINE_END diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 1d7d24995226..6b22b543a83f 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -127,7 +127,7 @@ static void da850_evm_m25p80_notify_add(struct mtd_info *mtd) size_t retlen; if (!strcmp(mtd->name, "MAC-Address")) { - mtd->read(mtd, 0, ETH_ALEN, &retlen, mac_addr); + mtd_read(mtd, 0, ETH_ALEN, &retlen, mac_addr); if (retlen == ETH_ALEN) pr_info("Read MAC addr from SPI Flash: %pM\n", mac_addr); @@ -753,7 +753,7 @@ static struct snd_platform_data da850_evm_snd_data = { .num_serializer = ARRAY_SIZE(da850_iis_serializer_direction), .tdm_slots = 2, .serial_dir = da850_iis_serializer_direction, - .asp_chan_q = EVENTQ_1, + .asp_chan_q = EVENTQ_0, .version = MCASP_VERSION_2, .txnumevt = 1, .rxnumevt = 1, @@ -1411,4 +1411,5 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM") .timer = &davinci_timer, .init_machine = da850_evm_init, .dma_zone_size = SZ_128M, + .restart = da8xx_restart, MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 4e0e707c313d..275341f159fb 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -357,4 +357,5 @@ MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM") .timer = &davinci_timer, .init_machine = dm355_evm_init, .dma_zone_size = SZ_128M, + .restart = davinci_restart, MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index ff2d2413279a..e99db28181ae 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -276,4 +276,5 @@ MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard") .timer = &davinci_timer, .init_machine = dm355_leopard_init, .dma_zone_size = SZ_128M, + .restart = davinci_restart, MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 1918ae711428..346e1de2f5a8 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -107,7 +107,7 @@ static struct mtd_partition davinci_nand_partitions[] = { /* UBL (a few copies) plus U-Boot */ .name = "bootloader", .offset = 0, - .size = 28 * NAND_BLOCK_SIZE, + .size = 30 * NAND_BLOCK_SIZE, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { /* U-Boot environment */ @@ -618,5 +618,6 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM") .timer = &davinci_timer, .init_machine = dm365_evm_init, .dma_zone_size = SZ_128M, + .restart = davinci_restart, MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 0cf8abf78d33..a64b49cfedca 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -719,4 +719,5 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") .timer = &davinci_timer, .init_machine = davinci_evm_init, .dma_zone_size = SZ_128M, + .restart = davinci_restart, MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index e574d7f837a8..64017558860b 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -564,7 +564,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) int val; u32 value; - if (!vpif_vsclkdis_reg || !cpld_client) + if (!vpif_vidclkctl_reg || !cpld_client) return -ENXIO; val = i2c_smbus_read_byte(cpld_client); @@ -572,7 +572,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) return val; spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(vpif_vsclkdis_reg); + value = __raw_readl(vpif_vidclkctl_reg); if (mux_mode) { val &= VPIF_INPUT_TWO_CHANNEL; value |= VIDCH1CLK; @@ -580,7 +580,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) val |= VPIF_INPUT_ONE_CHANNEL; value &= ~VIDCH1CLK; } - __raw_writel(value, vpif_vsclkdis_reg); + __raw_writel(value, vpif_vidclkctl_reg); spin_unlock_irqrestore(&vpif_reg_lock, flags); err = i2c_smbus_write_byte(cpld_client, val); @@ -799,6 +799,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") .timer = &davinci_timer, .init_machine = evm_init, .dma_zone_size = SZ_128M, + .restart = davinci_restart, MACHINE_END MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM") @@ -808,5 +809,6 @@ MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM") .timer = &davinci_timer, .init_machine = evm_init, .dma_zone_size = SZ_128M, + .restart = davinci_restart, MACHINE_END diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 3cfff555e8f2..672d820e2aa4 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -573,4 +573,5 @@ MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808") .timer = &davinci_timer, .init_machine = mityomapl138_init, .dma_zone_size = SZ_128M, + .restart = da8xx_restart, MACHINE_END diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index e5f231aefee4..6c4a16415d47 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -278,4 +278,5 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2") .timer = &davinci_timer, .init_machine = davinci_ntosd2_init, .dma_zone_size = SZ_128M, + .restart = davinci_restart, MACHINE_END diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index c6701e4a795c..e7c0c7c53493 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -344,4 +344,5 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard") .timer = &davinci_timer, .init_machine = omapl138_hawk_init, .dma_zone_size = SZ_128M, + .restart = da8xx_restart, MACHINE_END diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 5dd4da9d2308..0b136a831c59 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -157,4 +157,5 @@ MACHINE_START(SFFSDR, "Lyrtech SFFSDR") .timer = &davinci_timer, .init_machine = davinci_sffsdr_init, .dma_zone_size = SZ_128M, + .restart = davinci_restart, MACHINE_END diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index f69e40a29e02..5f14e30b00d8 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -283,4 +283,5 @@ MACHINE_START(TNETV107X, "TNETV107X EVM") .timer = &davinci_timer, .init_machine = tnetv107x_evm_board_init, .dma_zone_size = SZ_128M, + .restart = tnetv107x_restart, MACHINE_END diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index 00861139101d..008772e3b843 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -31,19 +31,12 @@ static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); static DEFINE_SPINLOCK(clockfw_lock); -static unsigned psc_domain(struct clk *clk) -{ - return (clk->flags & PSC_DSP) - ? DAVINCI_GPSC_DSPDOMAIN - : DAVINCI_GPSC_ARMDOMAIN; -} - static void __clk_enable(struct clk *clk) { if (clk->parent) __clk_enable(clk->parent); if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) - davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, + davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, true, clk->flags); } @@ -53,7 +46,7 @@ static void __clk_disable(struct clk *clk) return; if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) && (clk->flags & CLK_PSC)) - davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, + davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, false, clk->flags); if (clk->parent) __clk_disable(clk->parent); @@ -237,7 +230,7 @@ static int __init clk_disable_unused(void) pr_debug("Clocks: disable unused %s\n", ck->name); - davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc, + davinci_psc_config(ck->domain, ck->gpsc, ck->lpsc, false, ck->flags); } spin_unlock_irq(&clockfw_lock); diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index a705f367a84d..46f0f1bf1a4c 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -93,6 +93,7 @@ struct clk { u8 usecount; u8 lpsc; u8 gpsc; + u8 domain; u32 flags; struct clk *parent; struct list_head children; /* list of children */ @@ -107,11 +108,10 @@ struct clk { /* Clock flags: SoC-specific flags start at BIT(16) */ #define ALWAYS_ENABLED BIT(1) #define CLK_PSC BIT(2) -#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */ -#define CLK_PLL BIT(4) /* PLL-derived clock */ -#define PRE_PLL BIT(5) /* source is before PLL mult/div */ -#define PSC_SWRSTDISABLE BIT(6) /* Disable state is SwRstDisable */ -#define PSC_FORCE BIT(7) /* Force module state transtition */ +#define CLK_PLL BIT(3) /* PLL-derived clock */ +#define PRE_PLL BIT(4) /* source is before PLL mult/div */ +#define PSC_SWRSTDISABLE BIT(5) /* Disable state is SwRstDisable */ +#define PSC_FORCE BIT(6) /* Force module state transtition */ #define CLK(dev, con, ck) \ { \ diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index 865ffe5899ac..cb9b2e47510c 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -97,9 +97,6 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info) local_flush_tlb_all(); flush_cache_all(); - if (!davinci_soc_info.reset) - davinci_soc_info.reset = davinci_watchdog_reset; - /* * We want to check CPU revision early for cpu_is_xxxx() macros. * IO space mapping must be initialized before we can do that. diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index a6bf5dcaef13..deee5c2da754 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -1201,7 +1201,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = { .gpio_irq = IRQ_DA8XX_GPIO0, .serial_dev = &da8xx_serial_device, .emac_pdata = &da8xx_emac_pdata, - .reset_device = &da8xx_wdt_device, }; void __init da830_init(void) diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index b047f8702278..0ed7fdb64efb 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1121,7 +1121,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = { .emac_pdata = &da8xx_emac_pdata, .sram_dma = DA8XX_ARM_RAM_BASE, .sram_len = SZ_8K, - .reset_device = &da8xx_wdt_device, }; void __init da850_init(void) diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 68def7188868..42dbf3dc11ab 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -363,6 +363,11 @@ struct platform_device da8xx_wdt_device = { .resource = da8xx_watchdog_resources, }; +void da8xx_restart(char mode, const char *cmd) +{ + davinci_watchdog_reset(&da8xx_wdt_device); +} + int __init da8xx_register_watchdog(void) { return platform_device_register(&da8xx_wdt_device); diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 806a2f02b980..50c0156b4262 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -291,6 +291,11 @@ struct platform_device davinci_wdt_device = { .resource = wdt_resources, }; +void davinci_restart(char mode, const char *cmd) +{ + davinci_watchdog_reset(&davinci_wdt_device); +} + static void davinci_init_wdt(void) { platform_device_register(&davinci_wdt_device); diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index fe520d4167a2..19667cfc5de0 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -853,7 +853,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = { .serial_dev = &dm355_serial_device, .sram_dma = 0x00010000, .sram_len = SZ_32K, - .reset_device = &davinci_wdt_device, }; void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata) diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 679e168dce34..f15b435cc655 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -1083,7 +1083,6 @@ static struct davinci_soc_info davinci_soc_info_dm365 = { .emac_pdata = &dm365_emac_pdata, .sram_dma = 0x00010000, .sram_len = SZ_32K, - .reset_device = &davinci_wdt_device, }; void __init dm365_init_asp(struct snd_platform_data *pdata) diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 3470983aa343..43a48ee1917b 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -130,7 +130,7 @@ static struct clk dsp_clk = { .name = "dsp", .parent = &pll1_sysclk1, .lpsc = DAVINCI_LPSC_GEM, - .flags = PSC_DSP, + .domain = DAVINCI_GPSC_DSPDOMAIN, .usecount = 1, /* REVISIT how to disable? */ }; @@ -145,7 +145,7 @@ static struct clk vicp_clk = { .name = "vicp", .parent = &pll1_sysclk2, .lpsc = DAVINCI_LPSC_IMCOP, - .flags = PSC_DSP, + .domain = DAVINCI_GPSC_DSPDOMAIN, .usecount = 1, /* REVISIT how to disable? */ }; @@ -767,7 +767,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .emac_pdata = &dm644x_emac_pdata, .sram_dma = 0x00008000, .sram_len = SZ_16K, - .reset_device = &davinci_wdt_device, }; void __init dm644x_init_asp(struct snd_platform_data *pdata) diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 0b68ed534f8e..00f774394b16 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -161,7 +161,6 @@ static struct clk dsp_clk = { .name = "dsp", .parent = &pll1_sysclk1, .lpsc = DM646X_LPSC_C64X_CPU, - .flags = PSC_DSP, .usecount = 1, /* REVISIT how to disable? */ }; @@ -855,7 +854,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .emac_pdata = &dm646x_emac_pdata, .sram_dma = 0x10010000, .sram_len = SZ_32K, - .reset_device = &davinci_wdt_device, }; void __init dm646x_init_mcasp0(struct snd_platform_data *pdata) diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index a57cba21e21e..5cd39a4e0c96 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -77,14 +77,13 @@ struct davinci_soc_info { struct emac_platform_data *emac_pdata; dma_addr_t sram_dma; unsigned sram_len; - struct platform_device *reset_device; - void (*reset)(struct platform_device *); }; extern struct davinci_soc_info davinci_soc_info; extern void davinci_common_init(struct davinci_soc_info *soc_info); extern void davinci_init_ide(void); +void davinci_restart(char mode, const char *cmd); /* standard place to map on-chip SRAMs; they *may* support DMA */ #define SRAM_VIRT 0xfffe0000 diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index eaca7d8b9d68..ee3461d7ec1b 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -91,6 +91,7 @@ int da8xx_register_cpuidle(void); void __iomem * __init da8xx_get_mem_ctlr(void); int da850_register_pm(struct platform_device *pdev); int __init da850_register_sata(unsigned long refclkpn); +void da8xx_restart(char mode, const char *cmd); extern struct platform_device da8xx_serial_device; extern struct emac_platform_data da8xx_emac_pdata; diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h index 2a00fe5ac253..a8ee6c9f0bb0 100644 --- a/arch/arm/mach-davinci/include/mach/dm646x.h +++ b/arch/arm/mach-davinci/include/mach/dm646x.h @@ -16,6 +16,7 @@ #include <linux/i2c.h> #include <linux/videodev2.h> #include <linux/davinci_emac.h> +#include <media/davinci/vpif_types.h> #define DM646X_EMAC_BASE (0x01C80000) #define DM646X_EMAC_MDIO_BASE (DM646X_EMAC_BASE + 0x4000) @@ -34,58 +35,6 @@ int __init dm646x_init_edma(struct edma_rsv_info *rsv); void dm646x_video_init(void); -enum vpif_if_type { - VPIF_IF_BT656, - VPIF_IF_BT1120, - VPIF_IF_RAW_BAYER -}; - -struct vpif_interface { - enum vpif_if_type if_type; - unsigned hd_pol:1; - unsigned vd_pol:1; - unsigned fid_pol:1; -}; - -struct vpif_subdev_info { - const char *name; - struct i2c_board_info board_info; - u32 input; - u32 output; - unsigned can_route:1; - struct vpif_interface vpif_if; -}; - -struct vpif_display_config { - int (*set_clock)(int, int); - struct vpif_subdev_info *subdevinfo; - int subdev_count; - const char **output; - int output_count; - const char *card_name; -}; - -struct vpif_input { - struct v4l2_input input; - const char *subdev_name; -}; - -#define VPIF_CAPTURE_MAX_CHANNELS 2 - -struct vpif_capture_chan_config { - const struct vpif_input *inputs; - int input_count; -}; - -struct vpif_capture_config { - int (*setup_input_channel_mode)(int); - int (*setup_input_path)(int, const char *); - struct vpif_capture_chan_config chan_config[VPIF_CAPTURE_MAX_CHANNELS]; - struct vpif_subdev_info *subdev_info; - int subdev_count; - const char *card_name; -}; - void dm646x_setup_vpif(struct vpif_display_config *, struct vpif_capture_config *); diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h index d1b954955c12..b2267d1e1a71 100644 --- a/arch/arm/mach-davinci/include/mach/io.h +++ b/arch/arm/mach-davinci/include/mach/io.h @@ -21,12 +21,4 @@ #define __mem_pci(a) (a) #define __mem_isa(a) (a) -#ifndef __ASSEMBLER__ -#define __arch_ioremap davinci_ioremap -#define __arch_iounmap davinci_iounmap - -void __iomem *davinci_ioremap(unsigned long phys, size_t size, - unsigned int type); -void davinci_iounmap(volatile void __iomem *addr); -#endif #endif /* __ASM_ARCH_IO_H */ diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index fa59c097223d..8bc3fc256171 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -233,7 +233,7 @@ #define PTCMD 0x120 #define PTSTAT 0x128 #define PDSTAT 0x200 -#define PDCTL1 0x304 +#define PDCTL 0x300 #define MDSTAT 0x800 #define MDCTL 0xA00 @@ -244,7 +244,10 @@ #define PSC_STATE_ENABLE 3 #define MDSTAT_STATE_MASK 0x3f +#define PDSTAT_STATE_MASK 0x1f #define MDCTL_FORCE BIT(31) +#define PDCTL_NEXT BIT(1) +#define PDCTL_EPCGOOD BIT(8) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h index e65629c20769..fcb7a015aba5 100644 --- a/arch/arm/mach-davinci/include/mach/system.h +++ b/arch/arm/mach-davinci/include/mach/system.h @@ -18,10 +18,4 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ - if (davinci_soc_info.reset) - davinci_soc_info.reset(davinci_soc_info.reset_device); -} - #endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h index 89c1fdc63c0b..83e5926f3c46 100644 --- a/arch/arm/mach-davinci/include/mach/tnetv107x.h +++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h @@ -54,6 +54,7 @@ extern struct platform_device tnetv107x_serial_device; extern void __init tnetv107x_init(void); extern void __init tnetv107x_devices_init(struct tnetv107x_device_info *); extern void __init tnetv107x_irq_init(void); +void tnetv107x_restart(char mode, const char *cmd); #endif diff --git a/arch/arm/mach-davinci/include/mach/vmalloc.h b/arch/arm/mach-davinci/include/mach/vmalloc.h deleted file mode 100644 index d49646a8e206..000000000000 --- a/arch/arm/mach-davinci/include/mach/vmalloc.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * DaVinci vmalloc definitions - * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include <mach/hardware.h> - -/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */ -#define VMALLOC_END (IO_VIRT - (2<<20)) diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c deleted file mode 100644 index 8ea60a8b2495..000000000000 --- a/arch/arm/mach-davinci/io.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * DaVinci I/O mapping code - * - * Copyright (C) 2005-2006 Texas Instruments - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/io.h> - -#include <asm/tlb.h> -#include <asm/mach/map.h> - -#include <mach/common.h> - -/* - * Intercept ioremap() requests for addresses in our fixed mapping regions. - */ -void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type) -{ - struct map_desc *desc = davinci_soc_info.io_desc; - int desc_num = davinci_soc_info.io_desc_num; - int i; - - for (i = 0; i < desc_num; i++, desc++) { - unsigned long iophys = __pfn_to_phys(desc->pfn); - unsigned long iosize = desc->length; - - if (p >= iophys && (p + size) <= (iophys + iosize)) - return __io(desc->virtual + p - iophys); - } - - return __arm_ioremap_caller(p, size, type, - __builtin_return_address(0)); -} -EXPORT_SYMBOL(davinci_ioremap); - -void davinci_iounmap(volatile void __iomem *addr) -{ - unsigned long virt = (unsigned long)addr; - - if (virt >= VMALLOC_START && virt < VMALLOC_END) - __iounmap(addr); -} -EXPORT_SYMBOL(davinci_iounmap); diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 1fb6bdff38c1..d7e210f4b55c 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -52,7 +52,7 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) void davinci_psc_config(unsigned int domain, unsigned int ctlr, unsigned int id, bool enable, u32 flags) { - u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; + u32 epcpr, ptcmd, ptstat, pdstat, pdctl, mdstat, mdctl; void __iomem *psc_base; struct davinci_soc_info *soc_info = &davinci_soc_info; u32 next_state = PSC_STATE_ENABLE; @@ -79,11 +79,11 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, mdctl |= MDCTL_FORCE; __raw_writel(mdctl, psc_base + MDCTL + 4 * id); - pdstat = __raw_readl(psc_base + PDSTAT); - if ((pdstat & 0x00000001) == 0) { - pdctl1 = __raw_readl(psc_base + PDCTL1); - pdctl1 |= 0x1; - __raw_writel(pdctl1, psc_base + PDCTL1); + pdstat = __raw_readl(psc_base + PDSTAT + 4 * domain); + if ((pdstat & PDSTAT_STATE_MASK) == 0) { + pdctl = __raw_readl(psc_base + PDCTL + 4 * domain); + pdctl |= PDCTL_NEXT; + __raw_writel(pdctl, psc_base + PDCTL + 4 * domain); ptcmd = 1 << domain; __raw_writel(ptcmd, psc_base + PTCMD); @@ -92,9 +92,9 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, epcpr = __raw_readl(psc_base + EPCPR); } while ((((epcpr >> domain) & 1) == 0)); - pdctl1 = __raw_readl(psc_base + PDCTL1); - pdctl1 |= 0x100; - __raw_writel(pdctl1, psc_base + PDCTL1); + pdctl = __raw_readl(psc_base + PDCTL + 4 * domain); + pdctl |= PDCTL_EPCGOOD; + __raw_writel(pdctl, psc_base + PDCTL + 4 * domain); } else { ptcmd = 1 << domain; __raw_writel(ptcmd, psc_base + PTCMD); diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c index 409bb869c7c7..dc1a209b9b66 100644 --- a/arch/arm/mach-davinci/tnetv107x.c +++ b/arch/arm/mach-davinci/tnetv107x.c @@ -730,6 +730,11 @@ static void tnetv107x_watchdog_reset(struct platform_device *pdev) __raw_writel(1, ®s->kick); } +void tnetv107x_restart(char mode, const char *cmd) +{ + tnetv107x_watchdog_reset(&tnetv107x_wdt_device); +} + static struct davinci_soc_info tnetv107x_soc_info = { .io_desc = io_desc, .io_desc_num = ARRAY_SIZE(io_desc), @@ -752,8 +757,6 @@ static struct davinci_soc_info tnetv107x_soc_info = { .gpio_num = TNETV107X_N_GPIO, .timer_info = &timer_info, .serial_dev = &tnetv107x_serial_device, - .reset = tnetv107x_watchdog_reset, - .reset_device = &tnetv107x_wdt_device, }; void __init tnetv107x_init(void) diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c index 00be4fc26dd7..98b8c83b09ab 100644 --- a/arch/arm/mach-dove/addr-map.c +++ b/arch/arm/mach-dove/addr-map.c @@ -14,6 +14,7 @@ #include <linux/io.h> #include <asm/mach/arch.h> #include <asm/setup.h> +#include <plat/addr-map.h> #include "common.h" /* @@ -34,98 +35,72 @@ #define ATTR_PCIE_MEM 0xe8 #define ATTR_SCRATCHPAD 0x0 -/* - * CPU Address Decode Windows registers - */ -#define WIN_CTRL(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x0) -#define WIN_BASE(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x4) -#define WIN_REMAP_LO(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x8) -#define WIN_REMAP_HI(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0xc) - -struct mbus_dram_target_info dove_mbus_dram_info; - static inline void __iomem *ddr_map_sc(int i) { return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4)); } -static int cpu_win_can_remap(int win) -{ - if (win < 4) - return 1; - - return 0; -} - -static void __init setup_cpu_win(int win, u32 base, u32 size, - u8 target, u8 attr, int remap) -{ - u32 ctrl; - - base &= 0xffff0000; - ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1; - - writel(base, WIN_BASE(win)); - writel(ctrl, WIN_CTRL(win)); - if (cpu_win_can_remap(win)) { - if (remap < 0) - remap = base; - writel(remap & 0xffff0000, WIN_REMAP_LO(win)); - writel(0, WIN_REMAP_HI(win)); - } -} - -void __init dove_setup_cpu_mbus(void) -{ - int i; - int cs; +/* + * Description of the windows needed by the platform code + */ +static struct __initdata orion_addr_map_cfg addr_map_cfg = { + .num_wins = 8, + .remappable_wins = 4, + .bridge_virt_base = BRIDGE_VIRT_BASE, +}; +static const struct __initdata orion_addr_map_info addr_map_info[] = { /* - * First, disable and clear windows. + * Windows for PCIe IO+MEM space. */ - for (i = 0; i < 8; i++) { - writel(0, WIN_BASE(i)); - writel(0, WIN_CTRL(i)); - if (cpu_win_can_remap(i)) { - writel(0, WIN_REMAP_LO(i)); - writel(0, WIN_REMAP_HI(i)); - } - } - + { 0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE, + TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE + }, + { 1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE, + TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE + }, + { 2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE, + TARGET_PCIE0, ATTR_PCIE_MEM, -1 + }, + { 3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE, + TARGET_PCIE1, ATTR_PCIE_MEM, -1 + }, /* - * Setup windows for PCIe IO+MEM space. + * Window for CESA engine. */ - setup_cpu_win(0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE, - TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE); - setup_cpu_win(1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE, - TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE); - setup_cpu_win(2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE, - TARGET_PCIE0, ATTR_PCIE_MEM, -1); - setup_cpu_win(3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE, - TARGET_PCIE1, ATTR_PCIE_MEM, -1); - + { 4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE, + TARGET_CESA, ATTR_CESA, -1 + }, /* - * Setup window for CESA engine. + * Window to the BootROM for Standby and Sleep Resume */ - setup_cpu_win(4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE, - TARGET_CESA, ATTR_CESA, -1); - + { 5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE, + TARGET_BOOTROM, ATTR_BOOTROM, -1 + }, /* - * Setup the Window to the BootROM for Standby and Sleep Resume + * Window to the PMU Scratch Pad space */ - setup_cpu_win(5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE, - TARGET_BOOTROM, ATTR_BOOTROM, -1); + { 6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE, + TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1 + }, + /* End marker */ + { -1, 0, 0, 0, 0, 0 } +}; + +void __init dove_setup_cpu_mbus(void) +{ + int i; + int cs; /* - * Setup the Window to the PMU Scratch Pad space + * Disable, clear and configure windows. */ - setup_cpu_win(6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE, - TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1); + orion_config_wins(&addr_map_cfg, addr_map_info); /* * Setup MBUS dram target info. */ - dove_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; + orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; for (i = 0, cs = 0; i < 2; i++) { u32 map = readl(ddr_map_sc(i)); @@ -136,7 +111,7 @@ void __init dove_setup_cpu_mbus(void) if (map & 1) { struct mbus_dram_window *w; - w = &dove_mbus_dram_info.cs[cs++]; + w = &orion_mbus_dram_info.cs[cs++]; w->cs_index = i; w->mbus_attr = 0; /* CS address decoding done inside */ /* the DDR controller, no need to */ @@ -145,5 +120,5 @@ void __init dove_setup_cpu_mbus(void) w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4); } } - dove_mbus_dram_info.num_cs = cs; + orion_mbus_dram_info.num_cs = cs; } diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c index c8a406f7e946..792b4e2e24f1 100644 --- a/arch/arm/mach-dove/cm-a510.c +++ b/arch/arm/mach-dove/cm-a510.c @@ -93,4 +93,5 @@ MACHINE_START(CM_A510, "Compulab CM-A510 Board") .init_early = dove_init_early, .init_irq = dove_init_irq, .timer = &dove_timer, + .restart = dove_restart, MACHINE_END diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index a9e0dae86a26..dd1429ae6405 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -14,7 +14,6 @@ #include <linux/platform_device.h> #include <linux/pci.h> #include <linux/clk.h> -#include <linux/mbus.h> #include <linux/ata_platform.h> #include <linux/gpio.h> #include <asm/page.h> @@ -30,6 +29,7 @@ #include <linux/irq.h> #include <plat/time.h> #include <plat/common.h> +#include <plat/addr-map.h> #include "common.h" static int get_tclk(void); @@ -71,8 +71,7 @@ void __init dove_map_io(void) ****************************************************************************/ void __init dove_ehci0_init(void) { - orion_ehci_init(&dove_mbus_dram_info, - DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0); + orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0); } /***************************************************************************** @@ -80,8 +79,7 @@ void __init dove_ehci0_init(void) ****************************************************************************/ void __init dove_ehci1_init(void) { - orion_ehci_1_init(&dove_mbus_dram_info, - DOVE_USB1_PHYS_BASE, IRQ_DOVE_USB1); + orion_ehci_1_init(DOVE_USB1_PHYS_BASE, IRQ_DOVE_USB1); } /***************************************************************************** @@ -89,7 +87,7 @@ void __init dove_ehci1_init(void) ****************************************************************************/ void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) { - orion_ge00_init(eth_data, &dove_mbus_dram_info, + orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM, 0, get_tclk()); } @@ -107,8 +105,7 @@ void __init dove_rtc_init(void) ****************************************************************************/ void __init dove_sata_init(struct mv_sata_platform_data *sata_data) { - orion_sata_init(sata_data, &dove_mbus_dram_info, - DOVE_SATA_PHYS_BASE, IRQ_DOVE_SATA); + orion_sata_init(sata_data, DOVE_SATA_PHYS_BASE, IRQ_DOVE_SATA); } @@ -198,8 +195,7 @@ struct sys_timer dove_timer = { ****************************************************************************/ void __init dove_xor0_init(void) { - orion_xor0_init(&dove_mbus_dram_info, - DOVE_XOR0_PHYS_BASE, DOVE_XOR0_HIGH_PHYS_BASE, + orion_xor0_init(DOVE_XOR0_PHYS_BASE, DOVE_XOR0_HIGH_PHYS_BASE, IRQ_DOVE_XOR_00, IRQ_DOVE_XOR_01); } @@ -292,3 +288,19 @@ void __init dove_init(void) dove_xor0_init(); dove_xor1_init(); } + +void dove_restart(char mode, const char *cmd) +{ + /* + * Enable soft reset to assert RSTOUTn. + */ + writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); + + /* + * Assert soft reset. + */ + writel(SOFT_RESET, SYSTEM_SOFT_RESET); + + while (1) + ; +} diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h index 6a2046e44706..6432a3ba864b 100644 --- a/arch/arm/mach-dove/common.h +++ b/arch/arm/mach-dove/common.h @@ -15,7 +15,6 @@ struct mv643xx_eth_platform_data; struct mv_sata_platform_data; extern struct sys_timer dove_timer; -extern struct mbus_dram_target_info dove_mbus_dram_info; /* * Basic Dove init functions used early by machine-setup. @@ -39,5 +38,6 @@ void dove_spi1_init(void); void dove_i2c_init(void); void dove_sdio0_init(void); void dove_sdio1_init(void); +void dove_restart(char, const char *); #endif diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c index 11ea34e4fc76..ea77ae430b2d 100644 --- a/arch/arm/mach-dove/dove-db-setup.c +++ b/arch/arm/mach-dove/dove-db-setup.c @@ -100,4 +100,5 @@ MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board") .init_early = dove_init_early, .init_irq = dove_init_irq, .timer = &dove_timer, + .restart = dove_restart, MACHINE_END diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index b20ec9af7882..ad1165d488c1 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -11,8 +11,6 @@ #ifndef __ASM_ARCH_DOVE_H #define __ASM_ARCH_DOVE_H -#include <mach/vmalloc.h> - /* * Marvell Dove address maps. * diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h index 356afda56853..3027954f6162 100644 --- a/arch/arm/mach-dove/include/mach/system.h +++ b/arch/arm/mach-dove/include/mach/system.h @@ -9,28 +9,9 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <mach/bridge-regs.h> - static inline void arch_idle(void) { cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ - /* - * Enable soft reset to assert RSTOUTn. - */ - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); - - /* - * Assert soft reset. - */ - writel(SOFT_RESET, SYSTEM_SOFT_RESET); - - while (1) - ; -} - - #endif diff --git a/arch/arm/mach-dove/include/mach/vmalloc.h b/arch/arm/mach-dove/include/mach/vmalloc.h deleted file mode 100644 index a28792cf761e..000000000000 --- a/arch/arm/mach-dove/include/mach/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-dove/include/mach/vmalloc.h - */ - -#define VMALLOC_END 0xfd800000UL diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index aa2b3a09a51d..52e96d397ba8 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -10,7 +10,6 @@ #include <linux/kernel.h> #include <linux/pci.h> -#include <linux/mbus.h> #include <video/vga.h> #include <asm/mach/pci.h> #include <asm/mach/arch.h> @@ -19,6 +18,7 @@ #include <plat/pcie.h> #include <mach/irqs.h> #include <mach/bridge-regs.h> +#include <plat/addr-map.h> #include "common.h" struct pcie_port { @@ -50,7 +50,7 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys) */ orion_pcie_set_local_bus_nr(pp->base, sys->busnr); - orion_pcie_setup(pp->base, &dove_mbus_dram_info); + orion_pcie_setup(pp->base); /* * IORESOURCE_IO @@ -69,7 +69,7 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys) pp->res[0].flags = IORESOURCE_IO; if (request_resource(&ioport_resource, &pp->res[0])) panic("Request PCIe IO resource failed\n"); - sys->resource[0] = &pp->res[0]; + pci_add_resource(&sys->resources, &pp->res[0]); /* * IORESOURCE_MEM @@ -88,9 +88,7 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys) pp->res[1].flags = IORESOURCE_MEM; if (request_resource(&iomem_resource, &pp->res[1])) panic("Request PCIe Memory resource failed\n"); - sys->resource[1] = &pp->res[1]; - - sys->resource[2] = NULL; + pci_add_resource(&sys->resources, &pp->res[1]); return 1; } @@ -184,7 +182,8 @@ dove_pcie_scan_bus(int nr, struct pci_sys_data *sys) struct pci_bus *bus; if (nr < num_pcie_ports) { - bus = pci_scan_bus(sys->busnr, &pcie_ops, sys); + bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys, + &sys->resources); } else { bus = NULL; BUG(); diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index d0ce8abdd4b6..294aad07f7a0 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -278,13 +278,19 @@ static int __init ebsa110_init(void) arch_initcall(ebsa110_init); +static void ebsa110_restart(char mode, const char *cmd) +{ + soft_restart(0x80000000); +} + MACHINE_START(EBSA110, "EBSA110") /* Maintainer: Russell King */ .atag_offset = 0x400, .reserve_lp0 = 1, .reserve_lp2 = 1, - .soft_reboot = 1, + .restart_mode = 's', .map_io = ebsa110_map_io, .init_irq = ebsa110_init_irq, .timer = &ebsa110_timer, + .restart = ebsa110_restart, MACHINE_END diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h index 9a26245bf1fc..2e4af65edb6f 100644 --- a/arch/arm/mach-ebsa110/include/mach/system.h +++ b/arch/arm/mach-ebsa110/include/mach/system.h @@ -34,6 +34,4 @@ static inline void arch_idle(void) asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc"); } -#define arch_reset(mode, cmd) cpu_reset(0x80000000) - #endif diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h deleted file mode 100644 index ea141b7a3e03..000000000000 --- a/arch/arm/mach-ebsa110/include/mach/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-ebsa110/include/mach/vmalloc.h - * - * Copyright (C) 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define VMALLOC_END 0xdf000000UL diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c index 0713448206a5..681e939407d4 100644 --- a/arch/arm/mach-ep93xx/adssphere.c +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -16,6 +16,7 @@ #include <mach/hardware.h> +#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -36,6 +37,8 @@ MACHINE_START(ADSSPHERE, "ADS Sphere board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = adssphere_init_machine, + .restart = ep93xx_restart, MACHINE_END diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 2432a6b7dcac..24203f9a6796 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -906,3 +906,15 @@ void __init ep93xx_init_devices(void) platform_device_register(&ep93xx_ohci_device); platform_device_register(&ep93xx_leds); } + +void ep93xx_restart(char mode, const char *cmd) +{ + /* + * Set then clear the SWRST bit to initiate a software reset + */ + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST); + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST); + + while (1) + ; +} diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 70ef8c527d27..d115653edca3 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -39,6 +39,7 @@ #include <mach/ep93xx_spi.h> #include <mach/gpio-ep93xx.h> +#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -250,8 +251,10 @@ MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = edb93xx_init_machine, + .restart = ep93xx_restart, MACHINE_END #endif @@ -261,8 +264,10 @@ MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = edb93xx_init_machine, + .restart = ep93xx_restart, MACHINE_END #endif @@ -272,8 +277,10 @@ MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = edb93xx_init_machine, + .restart = ep93xx_restart, MACHINE_END #endif @@ -283,8 +290,10 @@ MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = edb93xx_init_machine, + .restart = ep93xx_restart, MACHINE_END #endif @@ -294,8 +303,10 @@ MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = edb93xx_init_machine, + .restart = ep93xx_restart, MACHINE_END #endif @@ -305,8 +316,10 @@ MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = edb93xx_init_machine, + .restart = ep93xx_restart, MACHINE_END #endif @@ -316,8 +329,10 @@ MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = edb93xx_init_machine, + .restart = ep93xx_restart, MACHINE_END #endif @@ -327,7 +342,9 @@ MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = edb93xx_init_machine, + .restart = ep93xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c index 45ee205856f8..af46970dc58e 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -16,6 +16,7 @@ #include <mach/hardware.h> +#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -36,6 +37,8 @@ MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = gesbc9312_init_machine, + .restart = ep93xx_restart, MACHINE_END diff --git a/arch/arm/mach-ep93xx/include/mach/entry-macro.S b/arch/arm/mach-ep93xx/include/mach/entry-macro.S index 96b85e2c2c0b..9be6edcf9045 100644 --- a/arch/arm/mach-ep93xx/include/mach/entry-macro.S +++ b/arch/arm/mach-ep93xx/include/mach/entry-macro.S @@ -9,51 +9,9 @@ * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. */ -#include <mach/ep93xx-regs.h> .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =(EP93XX_AHB_VIRT_BASE) - orr \base, \base, #0x000b0000 - mov \irqnr, #0 - ldr \irqstat, [\base] @ lower 32 interrupts - cmp \irqstat, #0 - bne 1001f - - eor \base, \base, #0x00070000 - ldr \irqstat, [\base] @ upper 32 interrupts - cmp \irqstat, #0 - beq 1002f - mov \irqnr, #0x20 - -1001: - movs \tmp, \irqstat, lsl #16 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #16 - - movs \tmp, \irqstat, lsl #8 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #8 - - movs \tmp, \irqstat, lsl #4 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #4 - - movs \tmp, \irqstat, lsl #2 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #2 - - movs \tmp, \irqstat, lsl #1 - addeq \irqnr, \irqnr, #1 - orrs \base, \base, #1 - -1002: - .endm diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index 50660455b1d8..d4c934931f9d 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -66,4 +66,6 @@ void ep93xx_register_ac97(void); void ep93xx_init_devices(void); extern struct sys_timer ep93xx_timer; +void ep93xx_restart(char, const char *); + #endif diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h index 6d661fe9d66c..b5bec7cb9b52 100644 --- a/arch/arm/mach-ep93xx/include/mach/system.h +++ b/arch/arm/mach-ep93xx/include/mach/system.h @@ -1,24 +1,7 @@ /* * arch/arm/mach-ep93xx/include/mach/system.h */ - -#include <mach/hardware.h> - static inline void arch_idle(void) { cpu_do_idle(); } - -static inline void arch_reset(char mode, const char *cmd) -{ - local_irq_disable(); - - /* - * Set then clear the SWRST bit to initiate a software reset - */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST); - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST); - - while (1) - ; -} diff --git a/arch/arm/mach-ep93xx/include/mach/vmalloc.h b/arch/arm/mach-ep93xx/include/mach/vmalloc.h deleted file mode 100644 index 1b3f25d03d39..000000000000 --- a/arch/arm/mach-ep93xx/include/mach/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/vmalloc.h - */ - -#define VMALLOC_END 0xfe800000UL diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index e72f7368876e..7b98084f0c97 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -18,6 +18,7 @@ #include <mach/hardware.h> +#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -80,8 +81,10 @@ MACHINE_START(MICRO9, "Contec Micro9-High") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = micro9_init_machine, + .restart = ep93xx_restart, MACHINE_END #endif @@ -91,8 +94,10 @@ MACHINE_START(MICRO9M, "Contec Micro9-Mid") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = micro9_init_machine, + .restart = ep93xx_restart, MACHINE_END #endif @@ -102,8 +107,10 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = micro9_init_machine, + .restart = ep93xx_restart, MACHINE_END #endif @@ -113,7 +120,9 @@ MACHINE_START(MICRO9S, "Contec Micro9-Slim") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = micro9_init_machine, + .restart = ep93xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index 52e090dc9d27..f4e553eca21c 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -25,6 +25,7 @@ #include <mach/fb.h> #include <mach/gpio-ep93xx.h> +#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -80,6 +81,8 @@ MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = simone_init_machine, + .restart = ep93xx_restart, MACHINE_END diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index 8121e3aedc0a..fd846331ddff 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -31,6 +31,7 @@ #include <mach/fb.h> #include <mach/gpio-ep93xx.h> +#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -177,6 +178,8 @@ MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = snappercl15_init_machine, + .restart = ep93xx_restart, MACHINE_END diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 8b2f1435bcac..79f8ecf07a19 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -23,6 +23,7 @@ #include <mach/hardware.h> #include <mach/ts72xx.h> +#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> @@ -247,6 +248,8 @@ MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") .atag_offset = 0x100, .map_io = ts72xx_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = ts72xx_init_machine, + .restart = ep93xx_restart, MACHINE_END diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index d96e4dbec6a8..03dd4012043e 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -361,4 +361,5 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, .init_machine = vision_init_machine, + .restart = ep93xx_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 724ec0f3560d..5d602f68a0e8 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -17,6 +17,8 @@ choice config ARCH_EXYNOS4 bool "SAMSUNG EXYNOS4" + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 help Samsung EXYNOS4 SoCs based systems @@ -57,6 +59,11 @@ config EXYNOS4_MCT help Use MCT (Multi Core Timer) as kernel timers +config EXYNOS4_DEV_DMA + bool + help + Compile in amba device definitions for DMA controller + config EXYNOS4_DEV_AHCI bool help @@ -82,6 +89,11 @@ config EXYNOS4_DEV_DWMCI help Compile in platform device definitions for DWMCI +config EXYNOS4_DEV_USB_OHCI + bool + help + Compile in platform device definition for USB OHCI + config EXYNOS4_SETUP_I2C1 bool help @@ -143,6 +155,11 @@ config EXYNOS4_SETUP_USB_PHY help Common setup code for USB PHY controller +config EXYNOS4_SETUP_SPI + bool + help + Common setup code for SPI GPIO configurations. + # machine support if ARCH_EXYNOS4 @@ -177,8 +194,10 @@ config MACH_SMDKV310 select SAMSUNG_DEV_BACKLIGHT select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_KEYPAD + select EXYNOS4_DEV_DMA select EXYNOS4_DEV_PD select SAMSUNG_DEV_PWM + select EXYNOS4_DEV_USB_OHCI select EXYNOS4_DEV_SYSMMU select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 @@ -197,6 +216,7 @@ config MACH_ARMLEX4210 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select EXYNOS4_DEV_AHCI + select EXYNOS4_DEV_DMA select EXYNOS4_DEV_SYSMMU select EXYNOS4_SETUP_SDHCI help @@ -222,6 +242,7 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_MFC select S5P_DEV_ONENAND select S5P_DEV_TV + select EXYNOS4_DEV_DMA select EXYNOS4_DEV_PD select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 @@ -255,6 +276,7 @@ config MACH_NURI select S5P_DEV_MFC select S5P_DEV_USB_EHCI select S5P_SETUP_MIPIPHY + select EXYNOS4_DEV_DMA select EXYNOS4_DEV_PD select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 @@ -287,7 +309,9 @@ config MACH_ORIGEN select S5P_DEV_USB_EHCI select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM + select EXYNOS4_DEV_DMA select EXYNOS4_DEV_PD + select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY @@ -327,6 +351,20 @@ config MACH_SMDK4412 Machine support for Samsung SMDK4412 endif +comment "Flattened Device Tree based board for Exynos4 based SoC" + +config MACH_EXYNOS4_DT + bool "Samsung Exynos4 Machine using device tree" + select CPU_EXYNOS4210 + select USE_OF + select ARM_AMBA + select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD + help + Machine support for Samsung Exynos4 machine with device tree enabled. + Select this if a fdt blob is available for the Exynos4 SoC based board. + Note: This is under development and not all peripherals can be supported + with this machine file. + if ARCH_EXYNOS4 comment "Configuration for HSMMC 8-bit bus width" diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 59069a35e40b..5fc202cdfdb6 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -10,15 +10,17 @@ obj-m := obj-n := obj- := -# Core support for EXYNOS4 system +# Core -obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o setup-i2c0.o -obj-$(CONFIG_ARCH_EXYNOS4) += irq-eint.o dma.o pmu.o +obj-$(CONFIG_ARCH_EXYNOS4) += common.o clock.o obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o + obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o +obj-$(CONFIG_ARCH_EXYNOS4) += pmu.o + obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_EXYNOS4_MCT) += mct.o @@ -37,6 +39,8 @@ obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o +obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o + # device support obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o @@ -44,7 +48,10 @@ obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o +obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o +obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o +obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o @@ -55,6 +62,6 @@ obj-$(CONFIG_EXYNOS4_SETUP_I2C5) += setup-i2c5.o obj-$(CONFIG_EXYNOS4_SETUP_I2C6) += setup-i2c6.o obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o -obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o +obj-$(CONFIG_EXYNOS4_SETUP_SPI) += setup-spi.o diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c index b9d5ef670eb4..a5823a7f249e 100644 --- a/arch/arm/mach-exynos/clock-exynos4210.c +++ b/arch/arm/mach-exynos/clock-exynos4210.c @@ -23,7 +23,6 @@ #include <plat/pll.h> #include <plat/s5p-clock.h> #include <plat/clock-clksrc.h> -#include <plat/exynos4.h> #include <plat/pm.h> #include <mach/hardware.h> @@ -31,6 +30,8 @@ #include <mach/regs-clock.h> #include <mach/exynos4-clock.h> +#include "common.h" + static struct sleep_save exynos4210_clock_save[] = { SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKSRC_LCD1), diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c index 77d5decb34fd..26a668b0d101 100644 --- a/arch/arm/mach-exynos/clock-exynos4212.c +++ b/arch/arm/mach-exynos/clock-exynos4212.c @@ -23,7 +23,6 @@ #include <plat/pll.h> #include <plat/s5p-clock.h> #include <plat/clock-clksrc.h> -#include <plat/exynos4.h> #include <plat/pm.h> #include <mach/hardware.h> @@ -31,6 +30,8 @@ #include <mach/regs-clock.h> #include <mach/exynos4-clock.h> +#include "common.h" + static struct sleep_save exynos4212_clock_save[] = { SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKDIV_IMAGE), diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c index 2894f0adef5c..5a8c42e90005 100644 --- a/arch/arm/mach-exynos/clock.c +++ b/arch/arm/mach-exynos/clock.c @@ -21,7 +21,6 @@ #include <plat/pll.h> #include <plat/s5p-clock.h> #include <plat/clock-clksrc.h> -#include <plat/exynos4.h> #include <plat/pm.h> #include <mach/map.h> @@ -29,6 +28,8 @@ #include <mach/sysmmu.h> #include <mach/exynos4-clock.h> +#include "common.h" + static struct sleep_save exynos4_clock_save[] = { SAVE_ITEM(S5P_CLKDIV_LEFTBUS), SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), @@ -553,16 +554,6 @@ static struct clk init_clocks_off[] = { .enable = exynos4_clk_dac_ctrl, .ctrlbit = (1 << 0), }, { - .name = "dma", - .devname = "dma-pl330.0", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "dma", - .devname = "dma-pl330.1", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 1), - }, { .name = "adc", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 15), @@ -778,6 +769,20 @@ static struct clk init_clocks[] = { } }; +static struct clk clk_pdma0 = { + .name = "dma", + .devname = "dma-pl330.0", + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 0), +}; + +static struct clk clk_pdma1 = { + .name = "dma", + .devname = "dma-pl330.1", + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 1), +}; + struct clk *clkset_group_list[] = { [0] = &clk_ext_xtal_mux, [1] = &clk_xusbxti, @@ -1009,46 +1014,6 @@ static struct clksrc_clk clk_dout_mmc4 = { static struct clksrc_clk clksrcs[] = { { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.0", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.1", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.2", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.3", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 }, - }, { .clk = { .name = "sclk_pwm", .enable = exynos4_clksrc_mask_peril0_ctrl, @@ -1147,36 +1112,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 }, }, { .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.0", - .enable = exynos4_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 16), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.1", - .enable = exynos4_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 20), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.2", - .enable = exynos4_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 }, - }, { - .clk = { .name = "sclk_fimg2d", }, .sources = &clkset_mout_g2d, @@ -1192,42 +1127,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_MFC, .shift = 0, .size = 4 }, }, { .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.0", - .parent = &clk_dout_mmc0.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 0), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 }, - }, { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.1", - .parent = &clk_dout_mmc1.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 4), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 }, - }, { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.2", - .parent = &clk_dout_mmc2.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 8), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 }, - }, { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.3", - .parent = &clk_dout_mmc3.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 12), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 }, - }, { - .clk = { .name = "sclk_dwmmc", .parent = &clk_dout_mmc4.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, @@ -1237,6 +1136,134 @@ static struct clksrc_clk clksrcs[] = { } }; +static struct clksrc_clk clk_sclk_uart0 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.0", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart1 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.1", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 4), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart2 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.2", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart3 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.3", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc0 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.0", + .parent = &clk_dout_mmc0.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 0), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 }, +}; + +static struct clksrc_clk clk_sclk_mmc1 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.1", + .parent = &clk_dout_mmc1.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 4), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 }, +}; + +static struct clksrc_clk clk_sclk_mmc2 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.2", + .parent = &clk_dout_mmc2.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 8), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 }, +}; + +static struct clksrc_clk clk_sclk_mmc3 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.3", + .parent = &clk_dout_mmc3.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 12), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 }, +}; + +static struct clksrc_clk clk_sclk_spi0 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.0", + .enable = exynos4_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 16), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_spi1 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.1", + .enable = exynos4_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 20), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_spi2 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.2", + .enable = exynos4_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 }, +}; + /* Clock initialization code */ static struct clksrc_clk *sysclks[] = { &clk_mout_apll, @@ -1271,6 +1298,42 @@ static struct clksrc_clk *sysclks[] = { &clk_mout_mfc1, }; +static struct clk *clk_cdev[] = { + &clk_pdma0, + &clk_pdma1, +}; + +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uart0, + &clk_sclk_uart1, + &clk_sclk_uart2, + &clk_sclk_uart3, + &clk_sclk_mmc0, + &clk_sclk_mmc1, + &clk_sclk_mmc2, + &clk_sclk_mmc3, + &clk_sclk_spi0, + &clk_sclk_spi1, + &clk_sclk_spi2, + +}; + +static struct clk_lookup exynos4_clk_lookup[] = { + CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &clk_sclk_uart0.clk), + CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &clk_sclk_uart1.clk), + CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &clk_sclk_uart2.clk), + CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &clk_sclk_uart3.clk), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), + CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk), + CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0), + CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1), + CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &clk_sclk_spi0.clk), + CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &clk_sclk_spi1.clk), + CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &clk_sclk_spi2.clk), +}; + static int xtal_rate; static unsigned long exynos4_fout_apll_get_rate(struct clk *clk) @@ -1478,11 +1541,19 @@ void __init exynos4_register_clocks(void) for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++) s3c_register_clksrc(sclk_tv[ptr], 1); + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) + s3c_register_clksrc(clksrc_cdev[ptr], 1); + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); + for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++) + s3c_disable_clocks(clk_cdev[ptr], 1); + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup)); register_syscore_ops(&exynos4_clock_syscore_ops); s3c24xx_register_clock(&dummy_apb_pclk); diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c new file mode 100644 index 000000000000..c59e18871006 --- /dev/null +++ b/arch/arm/mach-exynos/common.c @@ -0,0 +1,699 @@ +/* + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Common Codes for EXYNOS + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/device.h> +#include <linux/gpio.h> +#include <linux/sched.h> +#include <linux/serial_core.h> +#include <linux/of.h> +#include <linux/of_irq.h> + +#include <asm/proc-fns.h> +#include <asm/exception.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/hardware/gic.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/regs-irq.h> +#include <mach/regs-pmu.h> +#include <mach/regs-gpio.h> + +#include <plat/cpu.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/pm.h> +#include <plat/sdhci.h> +#include <plat/gpio-cfg.h> +#include <plat/adc-core.h> +#include <plat/fb-core.h> +#include <plat/fimc-core.h> +#include <plat/iic-core.h> +#include <plat/tv-core.h> +#include <plat/regs-serial.h> + +#include "common.h" + +static const char name_exynos4210[] = "EXYNOS4210"; +static const char name_exynos4212[] = "EXYNOS4212"; +static const char name_exynos4412[] = "EXYNOS4412"; + +static struct cpu_table cpu_ids[] __initdata = { + { + .idcode = EXYNOS4210_CPU_ID, + .idmask = EXYNOS4_CPU_MASK, + .map_io = exynos4_map_io, + .init_clocks = exynos4_init_clocks, + .init_uarts = exynos4_init_uarts, + .init = exynos_init, + .name = name_exynos4210, + }, { + .idcode = EXYNOS4212_CPU_ID, + .idmask = EXYNOS4_CPU_MASK, + .map_io = exynos4_map_io, + .init_clocks = exynos4_init_clocks, + .init_uarts = exynos4_init_uarts, + .init = exynos_init, + .name = name_exynos4212, + }, { + .idcode = EXYNOS4412_CPU_ID, + .idmask = EXYNOS4_CPU_MASK, + .map_io = exynos4_map_io, + .init_clocks = exynos4_init_clocks, + .init_uarts = exynos4_init_uarts, + .init = exynos_init, + .name = name_exynos4412, + }, +}; + +/* Initial IO mappings */ + +static struct map_desc exynos_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_CHIPID, + .pfn = __phys_to_pfn(EXYNOS4_PA_CHIPID), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_SYS, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSCON), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_TIMER, + .pfn = __phys_to_pfn(EXYNOS4_PA_TIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_WATCHDOG, + .pfn = __phys_to_pfn(EXYNOS4_PA_WATCHDOG), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SROMC, + .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SYSTIMER, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSTIMER), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_PMU, + .pfn = __phys_to_pfn(EXYNOS4_PA_PMU), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_COMBINER_BASE, + .pfn = __phys_to_pfn(EXYNOS4_PA_COMBINER), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GIC_CPU, + .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_CPU), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GIC_DIST, + .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(EXYNOS4_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc exynos4_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_CMU, + .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), + .length = SZ_128K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_COREPERI_BASE, + .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI), + .length = SZ_8K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_L2CC, + .pfn = __phys_to_pfn(EXYNOS4_PA_L2CC), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GPIO1, + .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO1), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GPIO2, + .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO2), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GPIO3, + .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO3), + .length = SZ_256, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_DMC0, + .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_USB_HSPHY, + .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc exynos4_iodesc0[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc exynos4_iodesc1[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void exynos_idle(void) +{ + if (!need_resched()) + cpu_do_idle(); + + local_irq_enable(); +} + +void exynos4_restart(char mode, const char *cmd) +{ + __raw_writel(0x1, S5P_SWRESET); +} + +/* + * exynos_map_io + * + * register the standard cpu IO areas + */ + +void __init exynos_init_io(struct map_desc *mach_desc, int size) +{ + /* initialize the io descriptors we need for initialization */ + iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc)); + if (mach_desc) + iotable_init(mach_desc, size); + + /* detect cpu id and rev. */ + s5p_init_cpu(S5P_VA_CHIPID); + + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); +} + +void __init exynos4_map_io(void) +{ + iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc)); + + if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0) + iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0)); + else + iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1)); + + /* initialize device information early */ + exynos4_default_sdhci0(); + exynos4_default_sdhci1(); + exynos4_default_sdhci2(); + exynos4_default_sdhci3(); + + s3c_adc_setname("samsung-adc-v3"); + + s3c_fimc_setname(0, "exynos4-fimc"); + s3c_fimc_setname(1, "exynos4-fimc"); + s3c_fimc_setname(2, "exynos4-fimc"); + s3c_fimc_setname(3, "exynos4-fimc"); + + /* The I2C bus controllers are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); + s3c_i2c2_setname("s3c2440-i2c"); + + s5p_fb_setname(0, "exynos4-fb"); + s5p_hdmi_setname("exynos4-hdmi"); +} + +void __init exynos4_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + + if (soc_is_exynos4210()) + exynos4210_register_clocks(); + else if (soc_is_exynos4212() || soc_is_exynos4412()) + exynos4212_register_clocks(); + + exynos4_register_clocks(); + exynos4_setup_clocks(); +} + +#define COMBINER_ENABLE_SET 0x0 +#define COMBINER_ENABLE_CLEAR 0x4 +#define COMBINER_INT_STATUS 0xC + +static DEFINE_SPINLOCK(irq_controller_lock); + +struct combiner_chip_data { + unsigned int irq_offset; + unsigned int irq_mask; + void __iomem *base; +}; + +static struct combiner_chip_data combiner_data[MAX_COMBINER_NR]; + +static inline void __iomem *combiner_base(struct irq_data *data) +{ + struct combiner_chip_data *combiner_data = + irq_data_get_irq_chip_data(data); + + return combiner_data->base; +} + +static void combiner_mask_irq(struct irq_data *data) +{ + u32 mask = 1 << (data->irq % 32); + + __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR); +} + +static void combiner_unmask_irq(struct irq_data *data) +{ + u32 mask = 1 << (data->irq % 32); + + __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET); +} + +static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) +{ + struct combiner_chip_data *chip_data = irq_get_handler_data(irq); + struct irq_chip *chip = irq_get_chip(irq); + unsigned int cascade_irq, combiner_irq; + unsigned long status; + + chained_irq_enter(chip, desc); + + spin_lock(&irq_controller_lock); + status = __raw_readl(chip_data->base + COMBINER_INT_STATUS); + spin_unlock(&irq_controller_lock); + status &= chip_data->irq_mask; + + if (status == 0) + goto out; + + combiner_irq = __ffs(status); + + cascade_irq = combiner_irq + (chip_data->irq_offset & ~31); + if (unlikely(cascade_irq >= NR_IRQS)) + do_bad_IRQ(cascade_irq, desc); + else + generic_handle_irq(cascade_irq); + + out: + chained_irq_exit(chip, desc); +} + +static struct irq_chip combiner_chip = { + .name = "COMBINER", + .irq_mask = combiner_mask_irq, + .irq_unmask = combiner_unmask_irq, +}; + +static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq) +{ + if (combiner_nr >= MAX_COMBINER_NR) + BUG(); + if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0) + BUG(); + irq_set_chained_handler(irq, combiner_handle_cascade_irq); +} + +static void __init combiner_init(unsigned int combiner_nr, void __iomem *base, + unsigned int irq_start) +{ + unsigned int i; + + if (combiner_nr >= MAX_COMBINER_NR) + BUG(); + + combiner_data[combiner_nr].base = base; + combiner_data[combiner_nr].irq_offset = irq_start; + combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3); + + /* Disable all interrupts */ + + __raw_writel(combiner_data[combiner_nr].irq_mask, + base + COMBINER_ENABLE_CLEAR); + + /* Setup the Linux IRQ subsystem */ + + for (i = irq_start; i < combiner_data[combiner_nr].irq_offset + + MAX_IRQ_IN_COMBINER; i++) { + irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq); + irq_set_chip_data(i, &combiner_data[combiner_nr]); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + } +} + +#ifdef CONFIG_OF +static const struct of_device_id exynos4_dt_irq_match[] = { + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + {}, +}; +#endif + +void __init exynos4_init_irq(void) +{ + int irq; + unsigned int gic_bank_offset; + + gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000; + + if (!of_have_populated_dt()) + gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset); +#ifdef CONFIG_OF + else + of_irq_init(exynos4_dt_irq_match); +#endif + + for (irq = 0; irq < MAX_COMBINER_NR; irq++) { + + combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), + COMBINER_IRQ(irq, 0)); + combiner_cascade_irq(irq, IRQ_SPI(irq)); + } + + /* + * The parameters of s5p_init_irq() are for VIC init. + * Theses parameters should be NULL and 0 because EXYNOS4 + * uses GIC instead of VIC. + */ + s5p_init_irq(NULL, 0); +} + +struct bus_type exynos4_subsys = { + .name = "exynos4-core", + .dev_name = "exynos4-core", +}; + +static struct device exynos4_dev = { + .bus = &exynos4_subsys, +}; + +static int __init exynos4_core_init(void) +{ + return subsys_system_register(&exynos4_subsys, NULL); +} +core_initcall(exynos4_core_init); + +#ifdef CONFIG_CACHE_L2X0 +static int __init exynos4_l2x0_cache_init(void) +{ + /* TAG, Data Latency Control: 2cycle */ + __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL); + + if (soc_is_exynos4210()) + __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); + else if (soc_is_exynos4212() || soc_is_exynos4412()) + __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); + + /* L2X0 Prefetch Control */ + __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL); + + /* L2X0 Power Control */ + __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN, + S5P_VA_L2CC + L2X0_POWER_CTRL); + + l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff); + + return 0; +} + +early_initcall(exynos4_l2x0_cache_init); +#endif + +int __init exynos_init(void) +{ + printk(KERN_INFO "EXYNOS: Initializing architecture\n"); + + /* set idle function */ + pm_idle = exynos_idle; + + return device_register(&exynos4_dev); +} + +/* uart registration process */ + +void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + struct s3c2410_uartcfg *tcfg = cfg; + u32 ucnt; + + for (ucnt = 0; ucnt < no; ucnt++, tcfg++) + tcfg->has_fracval = 1; + + s3c24xx_init_uartdevs("exynos4210-uart", s5p_uart_resources, cfg, no); +} + +static DEFINE_SPINLOCK(eint_lock); + +static unsigned int eint0_15_data[16]; + +static unsigned int exynos4_get_irq_nr(unsigned int number) +{ + u32 ret = 0; + + switch (number) { + case 0 ... 3: + ret = (number + IRQ_EINT0); + break; + case 4 ... 7: + ret = (number + (IRQ_EINT4 - 4)); + break; + case 8 ... 15: + ret = (number + (IRQ_EINT8 - 8)); + break; + default: + printk(KERN_ERR "number available : %d\n", number); + } + + return ret; +} + +static inline void exynos4_irq_eint_mask(struct irq_data *data) +{ + u32 mask; + + spin_lock(&eint_lock); + mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq))); + mask |= eint_irq_to_bit(data->irq); + __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq))); + spin_unlock(&eint_lock); +} + +static void exynos4_irq_eint_unmask(struct irq_data *data) +{ + u32 mask; + + spin_lock(&eint_lock); + mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq))); + mask &= ~(eint_irq_to_bit(data->irq)); + __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq))); + spin_unlock(&eint_lock); +} + +static inline void exynos4_irq_eint_ack(struct irq_data *data) +{ + __raw_writel(eint_irq_to_bit(data->irq), + S5P_EINT_PEND(EINT_REG_NR(data->irq))); +} + +static void exynos4_irq_eint_maskack(struct irq_data *data) +{ + exynos4_irq_eint_mask(data); + exynos4_irq_eint_ack(data); +} + +static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type) +{ + int offs = EINT_OFFSET(data->irq); + int shift; + u32 ctrl, mask; + u32 newvalue = 0; + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + newvalue = S5P_IRQ_TYPE_EDGE_RISING; + break; + + case IRQ_TYPE_EDGE_FALLING: + newvalue = S5P_IRQ_TYPE_EDGE_FALLING; + break; + + case IRQ_TYPE_EDGE_BOTH: + newvalue = S5P_IRQ_TYPE_EDGE_BOTH; + break; + + case IRQ_TYPE_LEVEL_LOW: + newvalue = S5P_IRQ_TYPE_LEVEL_LOW; + break; + + case IRQ_TYPE_LEVEL_HIGH: + newvalue = S5P_IRQ_TYPE_LEVEL_HIGH; + break; + + default: + printk(KERN_ERR "No such irq type %d", type); + return -EINVAL; + } + + shift = (offs & 0x7) * 4; + mask = 0x7 << shift; + + spin_lock(&eint_lock); + ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq))); + ctrl &= ~mask; + ctrl |= newvalue << shift; + __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq))); + spin_unlock(&eint_lock); + + switch (offs) { + case 0 ... 7: + s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE); + break; + case 8 ... 15: + s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE); + break; + case 16 ... 23: + s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE); + break; + case 24 ... 31: + s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE); + break; + default: + printk(KERN_ERR "No such irq number %d", offs); + } + + return 0; +} + +static struct irq_chip exynos4_irq_eint = { + .name = "exynos4-eint", + .irq_mask = exynos4_irq_eint_mask, + .irq_unmask = exynos4_irq_eint_unmask, + .irq_mask_ack = exynos4_irq_eint_maskack, + .irq_ack = exynos4_irq_eint_ack, + .irq_set_type = exynos4_irq_eint_set_type, +#ifdef CONFIG_PM + .irq_set_wake = s3c_irqext_wake, +#endif +}; + +/* + * exynos4_irq_demux_eint + * + * This function demuxes the IRQ from from EINTs 16 to 31. + * It is designed to be inlined into the specific handler + * s5p_irq_demux_eintX_Y. + * + * Each EINT pend/mask registers handle eight of them. + */ +static inline void exynos4_irq_demux_eint(unsigned int start) +{ + unsigned int irq; + + u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start))); + u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start))); + + status &= ~mask; + status &= 0xff; + + while (status) { + irq = fls(status) - 1; + generic_handle_irq(irq + start); + status &= ~(1 << irq); + } +} + +static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) +{ + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); + exynos4_irq_demux_eint(IRQ_EINT(16)); + exynos4_irq_demux_eint(IRQ_EINT(24)); + chained_irq_exit(chip, desc); +} + +static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) +{ + u32 *irq_data = irq_get_handler_data(irq); + struct irq_chip *chip = irq_get_chip(irq); + + chained_irq_enter(chip, desc); + chip->irq_mask(&desc->irq_data); + + if (chip->irq_ack) + chip->irq_ack(&desc->irq_data); + + generic_handle_irq(*irq_data); + + chip->irq_unmask(&desc->irq_data); + chained_irq_exit(chip, desc); +} + +int __init exynos4_init_irq_eint(void) +{ + int irq; + + for (irq = 0 ; irq <= 31 ; irq++) { + irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint, + handle_level_irq); + set_irq_flags(IRQ_EINT(irq), IRQF_VALID); + } + + irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31); + + for (irq = 0 ; irq <= 15 ; irq++) { + eint0_15_data[irq] = IRQ_EINT(irq); + + irq_set_handler_data(exynos4_get_irq_nr(irq), + &eint0_15_data[irq]); + irq_set_chained_handler(exynos4_get_irq_nr(irq), + exynos4_irq_eint0_15); + } + + return 0; +} +arch_initcall(exynos4_init_irq_eint); diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h new file mode 100644 index 000000000000..1ac49de0f398 --- /dev/null +++ b/arch/arm/mach-exynos/common.h @@ -0,0 +1,41 @@ +/* + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Common Header for EXYNOS machines + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H +#define __ARCH_ARM_MACH_EXYNOS_COMMON_H + +void exynos_init_io(struct map_desc *mach_desc, int size); +void exynos4_init_irq(void); + +void exynos4_register_clocks(void); +void exynos4_setup_clocks(void); + +void exynos4210_register_clocks(void); +void exynos4212_register_clocks(void); + +void exynos4_restart(char mode, const char *cmd); + +extern struct sys_timer exynos4_timer; + +#ifdef CONFIG_ARCH_EXYNOS +extern int exynos_init(void); +extern void exynos4_map_io(void); +extern void exynos4_init_clocks(int xtal); +extern void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +#else +#define exynos4_init_clocks NULL +#define exynos4_init_uarts NULL +#define exynos4_map_io NULL +#define exynos_init NULL +#endif + +#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */ diff --git a/arch/arm/mach-exynos/cpu.c b/arch/arm/mach-exynos/cpu.c deleted file mode 100644 index 90ec247f3b37..000000000000 --- a/arch/arm/mach-exynos/cpu.c +++ /dev/null @@ -1,298 +0,0 @@ -/* linux/arch/arm/mach-exynos/cpu.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/sched.h> -#include <linux/sysdev.h> - -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/proc-fns.h> -#include <asm/hardware/cache-l2x0.h> -#include <asm/hardware/gic.h> - -#include <plat/cpu.h> -#include <plat/clock.h> -#include <plat/devs.h> -#include <plat/exynos4.h> -#include <plat/adc-core.h> -#include <plat/sdhci.h> -#include <plat/fb-core.h> -#include <plat/fimc-core.h> -#include <plat/iic-core.h> -#include <plat/reset.h> -#include <plat/tv-core.h> - -#include <mach/regs-irq.h> -#include <mach/regs-pmu.h> - -unsigned int gic_bank_offset __read_mostly; - -extern int combiner_init(unsigned int combiner_nr, void __iomem *base, - unsigned int irq_start); -extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq); - -/* Initial IO mappings */ -static struct map_desc exynos_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSTIMER, - .pfn = __phys_to_pfn(EXYNOS_PA_SYSTIMER), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_PMU, - .pfn = __phys_to_pfn(EXYNOS_PA_PMU), - .length = SZ_64K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_COMBINER_BASE, - .pfn = __phys_to_pfn(EXYNOS_PA_COMBINER), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GIC_CPU, - .pfn = __phys_to_pfn(EXYNOS_PA_GIC_CPU), - .length = SZ_64K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GIC_DIST, - .pfn = __phys_to_pfn(EXYNOS_PA_GIC_DIST), - .length = SZ_64K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_CMU, - .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), - .length = SZ_128K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_COREPERI_BASE, - .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI), - .length = SZ_8K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_L2CC, - .pfn = __phys_to_pfn(EXYNOS4_PA_L2CC), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO1, - .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO1), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO2, - .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO2), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO3, - .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO3), - .length = SZ_256, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_DMC0, - .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_SROMC, - .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_USB_HSPHY, - .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4_iodesc0[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4_iodesc1[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static void exynos_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} - -static void exynos4_sw_reset(void) -{ - __raw_writel(0x1, S5P_SWRESET); -} - -/* - * exynos_map_io - * - * register the standard cpu IO areas - */ -void __init exynos4_map_io(void) -{ - iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc)); - iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc)); - - if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0) - iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0)); - else - iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1)); - - /* initialize device information early */ - exynos4_default_sdhci0(); - exynos4_default_sdhci1(); - exynos4_default_sdhci2(); - exynos4_default_sdhci3(); - - s3c_adc_setname("samsung-adc-v3"); - - s3c_fimc_setname(0, "exynos4-fimc"); - s3c_fimc_setname(1, "exynos4-fimc"); - s3c_fimc_setname(2, "exynos4-fimc"); - s3c_fimc_setname(3, "exynos4-fimc"); - - /* The I2C bus controllers are directly compatible with s3c2440 */ - s3c_i2c0_setname("s3c2440-i2c"); - s3c_i2c1_setname("s3c2440-i2c"); - s3c_i2c2_setname("s3c2440-i2c"); - - s5p_fb_setname(0, "exynos4-fb"); - s5p_hdmi_setname("exynos4-hdmi"); -} - -void __init exynos4_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - - if (soc_is_exynos4210()) - exynos4210_register_clocks(); - else if (soc_is_exynos4212() || soc_is_exynos4412()) - exynos4212_register_clocks(); - - exynos4_register_clocks(); - exynos4_setup_clocks(); -} - -static void exynos4_gic_irq_fix_base(struct irq_data *d) -{ - struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); - - gic_data->cpu_base = S5P_VA_GIC_CPU + - (gic_bank_offset * smp_processor_id()); - - gic_data->dist_base = S5P_VA_GIC_DIST + - (gic_bank_offset * smp_processor_id()); -} - -void __init exynos4_init_irq(void) -{ - int irq; - - gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000; - - gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); - gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base; - gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base; - gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base; - - for (irq = 0; irq < MAX_COMBINER_NR; irq++) { - - combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), - COMBINER_IRQ(irq, 0)); - combiner_cascade_irq(irq, IRQ_SPI(irq)); - } - - /* The parameters of s5p_init_irq() are for VIC init. - * Theses parameters should be NULL and 0 because EXYNOS4 - * uses GIC instead of VIC. - */ - s5p_init_irq(NULL, 0); -} - -struct sysdev_class exynos4_sysclass = { - .name = "exynos4-core", -}; - -static struct sys_device exynos4_sysdev = { - .cls = &exynos4_sysclass, -}; - -static int __init exynos4_core_init(void) -{ - return sysdev_class_register(&exynos4_sysclass); -} -core_initcall(exynos4_core_init); - -#ifdef CONFIG_CACHE_L2X0 -static int __init exynos4_l2x0_cache_init(void) -{ - /* TAG, Data Latency Control: 2cycle */ - __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL); - - if (soc_is_exynos4210()) - __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); - else if (soc_is_exynos4212() || soc_is_exynos4412()) - __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); - - /* L2X0 Prefetch Control */ - __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL); - - /* L2X0 Power Control */ - __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN, - S5P_VA_L2CC + L2X0_POWER_CTRL); - - l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff); - - return 0; -} - -early_initcall(exynos4_l2x0_cache_init); -#endif - -int __init exynos_init(void) -{ - printk(KERN_INFO "EXYNOS: Initializing architecture\n"); - - /* set idle function */ - pm_idle = exynos_idle; - - /* set sw_reset function */ - if (soc_is_exynos4210() || soc_is_exynos4212() || soc_is_exynos4412()) - s5p_reset_hook = exynos4_sw_reset; - - return sysdev_register(&exynos4_sysdev); -} diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c new file mode 100644 index 000000000000..b8e75300c77d --- /dev/null +++ b/arch/arm/mach-exynos/dev-ohci.c @@ -0,0 +1,52 @@ +/* linux/arch/arm/mach-exynos/dev-ohci.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS - OHCI support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> +#include <mach/ohci.h> + +#include <plat/devs.h> +#include <plat/usb-phy.h> + +static struct resource exynos4_ohci_resource[] = { + [0] = DEFINE_RES_MEM(EXYNOS4_PA_OHCI, SZ_256), + [1] = DEFINE_RES_IRQ(IRQ_USB_HOST), +}; + +static u64 exynos4_ohci_dma_mask = DMA_BIT_MASK(32); + +struct platform_device exynos4_device_ohci = { + .name = "exynos-ohci", + .id = -1, + .num_resources = ARRAY_SIZE(exynos4_ohci_resource), + .resource = exynos4_ohci_resource, + .dev = { + .dma_mask = &exynos4_ohci_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; + +void __init exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd) +{ + struct exynos4_ohci_platdata *npd; + + npd = s3c_set_platdata(pd, sizeof(struct exynos4_ohci_platdata), + &exynos4_device_ohci); + + if (!npd->phy_init) + npd->phy_init = s5p_usb_phy_init; + if (!npd->phy_exit) + npd->phy_exit = s5p_usb_phy_exit; +} diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c index 9667c61e64fb..b10fcd270f07 100644 --- a/arch/arm/mach-exynos/dma.c +++ b/arch/arm/mach-exynos/dma.c @@ -24,6 +24,7 @@ #include <linux/dma-mapping.h> #include <linux/amba/bus.h> #include <linux/amba/pl330.h> +#include <linux/of.h> #include <asm/irq.h> #include <plat/devs.h> @@ -35,95 +36,42 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -struct dma_pl330_peri pdma0_peri[28] = { - { - .peri_id = (u8)DMACH_PCM0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MSM_REQ0, - }, { - .peri_id = (u8)DMACH_MSM_REQ2, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0S_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART4_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART4_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SLIMBUS0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SLIMBUS0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SLIMBUS2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SLIMBUS2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SLIMBUS4_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SLIMBUS4_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_AC97_MICIN, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_AC97_PCMIN, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_AC97_PCMOUT, - .rqtype = MEMTODEV, - }, +u8 pdma0_peri[] = { + DMACH_PCM0_RX, + DMACH_PCM0_TX, + DMACH_PCM2_RX, + DMACH_PCM2_TX, + DMACH_MSM_REQ0, + DMACH_MSM_REQ2, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI2_RX, + DMACH_SPI2_TX, + DMACH_I2S0S_TX, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S2_RX, + DMACH_I2S2_TX, + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART4_RX, + DMACH_UART4_TX, + DMACH_SLIMBUS0_RX, + DMACH_SLIMBUS0_TX, + DMACH_SLIMBUS2_RX, + DMACH_SLIMBUS2_TX, + DMACH_SLIMBUS4_RX, + DMACH_SLIMBUS4_TX, + DMACH_AC97_MICIN, + DMACH_AC97_PCMIN, + DMACH_AC97_PCMOUT, }; struct dma_pl330_platdata exynos4_pdma0_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma0_peri), - .peri = pdma0_peri, + .peri_id = pdma0_peri, }; struct amba_device exynos4_device_pdma0 = { @@ -142,86 +90,37 @@ struct amba_device exynos4_device_pdma0 = { .periphid = 0x00041330, }; -struct dma_pl330_peri pdma1_peri[25] = { - { - .peri_id = (u8)DMACH_PCM0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MSM_REQ1, - }, { - .peri_id = (u8)DMACH_MSM_REQ3, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0S_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SLIMBUS1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SLIMBUS1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SLIMBUS3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SLIMBUS3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SLIMBUS5_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SLIMBUS5_TX, - .rqtype = MEMTODEV, - }, +u8 pdma1_peri[] = { + DMACH_PCM0_RX, + DMACH_PCM0_TX, + DMACH_PCM1_RX, + DMACH_PCM1_TX, + DMACH_MSM_REQ1, + DMACH_MSM_REQ3, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_I2S0S_TX, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_SLIMBUS1_RX, + DMACH_SLIMBUS1_TX, + DMACH_SLIMBUS3_RX, + DMACH_SLIMBUS3_TX, + DMACH_SLIMBUS5_RX, + DMACH_SLIMBUS5_TX, }; struct dma_pl330_platdata exynos4_pdma1_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma1_peri), - .peri = pdma1_peri, + .peri_id = pdma1_peri, }; struct amba_device exynos4_device_pdma1 = { @@ -242,7 +141,15 @@ struct amba_device exynos4_device_pdma1 = { static int __init exynos4_dma_init(void) { + if (of_have_populated_dt()) + return 0; + + dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask); amba_device_register(&exynos4_device_pdma0, &iomem_resource); + + dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask); amba_device_register(&exynos4_device_pdma1, &iomem_resource); return 0; diff --git a/arch/arm/mach-exynos/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S index f5e9fd8e37b4..3ba4f547534b 100644 --- a/arch/arm/mach-exynos/include/mach/entry-macro.S +++ b/arch/arm/mach-exynos/include/mach/entry-macro.S @@ -9,83 +9,8 @@ * warranty of any kind, whether express or implied. */ -#include <mach/hardware.h> -#include <mach/map.h> -#include <asm/hardware/gic.h> - .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - mov \tmp, #0 - - mrc p15, 0, \base, c0, c0, 5 - and \base, \base, #3 - cmp \base, #0 - beq 1f - - ldr \tmp, =gic_bank_offset - ldr \tmp, [\tmp] - cmp \base, #1 - beq 1f - - cmp \base, #2 - addeq \tmp, \tmp, \tmp - addne \tmp, \tmp, \tmp, LSL #1 - -1: ldr \base, =gic_cpu_base_addr - ldr \base, [\base] - add \base, \base, \tmp - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an interrupt if it's - * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. - * - * A simple read from the controller will tell us the number of the highest - * priority enabled interrupt. We then just need to check whether it is in the - * valid range for an IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ - - ldr \tmp, =1021 - - bic \irqnr, \irqstat, #0x1c00 - - cmp \irqnr, #15 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - addne \irqnr, \irqnr, #32 - - .endm - - /* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index dfd4b7eecb90..f77bce04789a 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -17,13 +17,13 @@ /* PPI: Private Peripheral Interrupt */ -#define IRQ_PPI(x) S5P_IRQ(x+16) +#define IRQ_PPI(x) (x+16) #define IRQ_MCT_LOCALTIMER IRQ_PPI(12) /* SPI: Shared Peripheral Interrupt */ -#define IRQ_SPI(x) S5P_IRQ(x+32) +#define IRQ_SPI(x) (x+32) #define IRQ_EINT0 IRQ_SPI(16) #define IRQ_EINT1 IRQ_SPI(17) @@ -72,6 +72,9 @@ #define IRQ_IIC5 IRQ_SPI(63) #define IRQ_IIC6 IRQ_SPI(64) #define IRQ_IIC7 IRQ_SPI(65) +#define IRQ_SPI0 IRQ_SPI(66) +#define IRQ_SPI1 IRQ_SPI(67) +#define IRQ_SPI2 IRQ_SPI(68) #define IRQ_USB_HOST IRQ_SPI(70) #define IRQ_USB_HSOTG IRQ_SPI(71) @@ -163,7 +166,9 @@ #define IRQ_GPIO2_NR_GROUPS 9 #define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT) +#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64) + /* Set the default NR_IRQS */ -#define NR_IRQS (IRQ_GPIO_END + 64) +#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT) #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 058541d45af0..c754a22a2bb3 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -87,6 +87,10 @@ #define EXYNOS4_PA_SYSMMU_TV 0x12E20000 #define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000 #define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000 +#define EXYNOS4_PA_SPI0 0x13920000 +#define EXYNOS4_PA_SPI1 0x13930000 +#define EXYNOS4_PA_SPI2 0x13940000 + #define EXYNOS4_PA_GPIO1 0x11400000 #define EXYNOS4_PA_GPIO2 0x11000000 @@ -107,6 +111,7 @@ #define EXYNOS4_PA_SROMC 0x12570000 #define EXYNOS4_PA_EHCI 0x12580000 +#define EXYNOS4_PA_OHCI 0x12590000 #define EXYNOS4_PA_HSPHY 0x125B0000 #define EXYNOS4_PA_MFC 0x13400000 @@ -148,8 +153,10 @@ #define S3C_PA_RTC EXYNOS4_PA_RTC #define S3C_PA_WDT EXYNOS4_PA_WATCHDOG #define S3C_PA_UART EXYNOS4_PA_UART +#define S3C_PA_SPI0 EXYNOS4_PA_SPI0 +#define S3C_PA_SPI1 EXYNOS4_PA_SPI1 +#define S3C_PA_SPI2 EXYNOS4_PA_SPI2 -#define S5P_PA_CHIPID EXYNOS4_PA_CHIPID #define S5P_PA_EHCI EXYNOS4_PA_EHCI #define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0 #define S5P_PA_FIMC1 EXYNOS4_PA_FIMC1 @@ -166,26 +173,17 @@ #define S5P_PA_ONENAND_DMA EXYNOS4_PA_ONENAND_DMA #define S5P_PA_SDO EXYNOS4_PA_SDO #define S5P_PA_SDRAM EXYNOS4_PA_SDRAM -#define S5P_PA_SROMC EXYNOS4_PA_SROMC -#define S5P_PA_SYSCON EXYNOS4_PA_SYSCON -#define S5P_PA_TIMER EXYNOS4_PA_TIMER #define S5P_PA_VP EXYNOS4_PA_VP #define SAMSUNG_PA_ADC EXYNOS4_PA_ADC #define SAMSUNG_PA_ADC1 EXYNOS4_PA_ADC1 #define SAMSUNG_PA_KEYPAD EXYNOS4_PA_KEYPAD -#define EXYNOS_PA_COMBINER EXYNOS4_PA_COMBINER -#define EXYNOS_PA_GIC_CPU EXYNOS4_PA_GIC_CPU -#define EXYNOS_PA_GIC_DIST EXYNOS4_PA_GIC_DIST -#define EXYNOS_PA_PMU EXYNOS4_PA_PMU -#define EXYNOS_PA_SYSTIMER EXYNOS4_PA_SYSTIMER - /* Compatibility UART */ #define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) -#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART(x) (EXYNOS4_PA_UART + ((x) * S3C_UART_OFFSET)) #define S5P_PA_UART0 S5P_PA_UART(0) #define S5P_PA_UART1 S5P_PA_UART(1) #define S5P_PA_UART2 S5P_PA_UART(2) diff --git a/arch/arm/mach-exynos/include/mach/ohci.h b/arch/arm/mach-exynos/include/mach/ohci.h new file mode 100644 index 000000000000..c256c595be5e --- /dev/null +++ b/arch/arm/mach-exynos/include/mach/ohci.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co.Ltd + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __MACH_EXYNOS_OHCI_H +#define __MACH_EXYNOS_OHCI_H + +struct exynos4_ohci_platdata { + int (*phy_init)(struct platform_device *pdev, int type); + int (*phy_exit)(struct platform_device *pdev, int type); +}; + +extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd); + +#endif /* __MACH_EXYNOS_OHCI_H */ diff --git a/arch/arm/mach-exynos/include/mach/spi-clocks.h b/arch/arm/mach-exynos/include/mach/spi-clocks.h new file mode 100644 index 000000000000..576efdf6d091 --- /dev/null +++ b/arch/arm/mach-exynos/include/mach/spi-clocks.h @@ -0,0 +1,16 @@ +/* linux/arch/arm/mach-exynos4/include/mach/spi-clocks.h + * + * Copyright (C) 2011 Samsung Electronics Co. Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_SPI_CLKS_H +#define __ASM_ARCH_SPI_CLKS_H __FILE__ + +/* Must source from SCLK_SPI */ +#define EXYNOS4_SPI_SRCCLK_SCLK 0 + +#endif /* __ASM_ARCH_SPI_CLKS_H */ diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h index 5e3220c18fc7..0063a6de3dc8 100644 --- a/arch/arm/mach-exynos/include/mach/system.h +++ b/arch/arm/mach-exynos/include/mach/system.h @@ -13,8 +13,6 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H __FILE__ -#include <plat/system-reset.h> - static void arch_idle(void) { /* nothing here yet */ diff --git a/arch/arm/mach-exynos/include/mach/vmalloc.h b/arch/arm/mach-exynos/include/mach/vmalloc.h deleted file mode 100644 index 284330e571d2..000000000000 --- a/arch/arm/mach-exynos/include/mach/vmalloc.h +++ /dev/null @@ -1,22 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/vmalloc.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright 2010 Ben Dooks <ben-linux@fluff.org> - * - * Based on arch/arm/mach-s5p6440/include/mach/vmalloc.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * EXYNOS4 vmalloc definition -*/ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H __FILE__ - -#define VMALLOC_END 0xF6000000UL - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-exynos/init.c b/arch/arm/mach-exynos/init.c deleted file mode 100644 index a8a83e3881a4..000000000000 --- a/arch/arm/mach-exynos/init.c +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/arch/arm/mach-exynos4/init.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/serial_core.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/regs-serial.h> - -static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = { - [0] = { - .name = "uclk1", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - -/* uart registration process */ -void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->has_fracval = 1; - tcfg->clocks = exynos4_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks); - } - tcfg->flags |= NO_NEED_CHECK_CLKSRC; - } - - s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); -} diff --git a/arch/arm/mach-exynos/irq-combiner.c b/arch/arm/mach-exynos/irq-combiner.c deleted file mode 100644 index 5a2758ab055e..000000000000 --- a/arch/arm/mach-exynos/irq-combiner.c +++ /dev/null @@ -1,124 +0,0 @@ -/* linux/arch/arm/mach-exynos4/irq-combiner.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Based on arch/arm/common/gic.c - * - * IRQ COMBINER support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/io.h> - -#include <asm/mach/irq.h> - -#define COMBINER_ENABLE_SET 0x0 -#define COMBINER_ENABLE_CLEAR 0x4 -#define COMBINER_INT_STATUS 0xC - -static DEFINE_SPINLOCK(irq_controller_lock); - -struct combiner_chip_data { - unsigned int irq_offset; - unsigned int irq_mask; - void __iomem *base; -}; - -static struct combiner_chip_data combiner_data[MAX_COMBINER_NR]; - -static inline void __iomem *combiner_base(struct irq_data *data) -{ - struct combiner_chip_data *combiner_data = - irq_data_get_irq_chip_data(data); - - return combiner_data->base; -} - -static void combiner_mask_irq(struct irq_data *data) -{ - u32 mask = 1 << (data->irq % 32); - - __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR); -} - -static void combiner_unmask_irq(struct irq_data *data) -{ - u32 mask = 1 << (data->irq % 32); - - __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET); -} - -static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) -{ - struct combiner_chip_data *chip_data = irq_get_handler_data(irq); - struct irq_chip *chip = irq_get_chip(irq); - unsigned int cascade_irq, combiner_irq; - unsigned long status; - - chained_irq_enter(chip, desc); - - spin_lock(&irq_controller_lock); - status = __raw_readl(chip_data->base + COMBINER_INT_STATUS); - spin_unlock(&irq_controller_lock); - status &= chip_data->irq_mask; - - if (status == 0) - goto out; - - combiner_irq = __ffs(status); - - cascade_irq = combiner_irq + (chip_data->irq_offset & ~31); - if (unlikely(cascade_irq >= NR_IRQS)) - do_bad_IRQ(cascade_irq, desc); - else - generic_handle_irq(cascade_irq); - - out: - chained_irq_exit(chip, desc); -} - -static struct irq_chip combiner_chip = { - .name = "COMBINER", - .irq_mask = combiner_mask_irq, - .irq_unmask = combiner_unmask_irq, -}; - -void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq) -{ - if (combiner_nr >= MAX_COMBINER_NR) - BUG(); - if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0) - BUG(); - irq_set_chained_handler(irq, combiner_handle_cascade_irq); -} - -void __init combiner_init(unsigned int combiner_nr, void __iomem *base, - unsigned int irq_start) -{ - unsigned int i; - - if (combiner_nr >= MAX_COMBINER_NR) - BUG(); - - combiner_data[combiner_nr].base = base; - combiner_data[combiner_nr].irq_offset = irq_start; - combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3); - - /* Disable all interrupts */ - - __raw_writel(combiner_data[combiner_nr].irq_mask, - base + COMBINER_ENABLE_CLEAR); - - /* Setup the Linux IRQ subsystem */ - - for (i = irq_start; i < combiner_data[combiner_nr].irq_offset - + MAX_IRQ_IN_COMBINER; i++) { - irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq); - irq_set_chip_data(i, &combiner_data[combiner_nr]); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } -} diff --git a/arch/arm/mach-exynos/irq-eint.c b/arch/arm/mach-exynos/irq-eint.c deleted file mode 100644 index badb8c66fc9b..000000000000 --- a/arch/arm/mach-exynos/irq-eint.c +++ /dev/null @@ -1,237 +0,0 @@ -/* linux/arch/arm/mach-exynos4/irq-eint.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - IRQ EINT support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/sysdev.h> -#include <linux/gpio.h> - -#include <plat/pm.h> -#include <plat/cpu.h> -#include <plat/gpio-cfg.h> - -#include <mach/regs-gpio.h> - -#include <asm/mach/irq.h> - -static DEFINE_SPINLOCK(eint_lock); - -static unsigned int eint0_15_data[16]; - -static unsigned int exynos4_get_irq_nr(unsigned int number) -{ - u32 ret = 0; - - switch (number) { - case 0 ... 3: - ret = (number + IRQ_EINT0); - break; - case 4 ... 7: - ret = (number + (IRQ_EINT4 - 4)); - break; - case 8 ... 15: - ret = (number + (IRQ_EINT8 - 8)); - break; - default: - printk(KERN_ERR "number available : %d\n", number); - } - - return ret; -} - -static inline void exynos4_irq_eint_mask(struct irq_data *data) -{ - u32 mask; - - spin_lock(&eint_lock); - mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq))); - mask |= eint_irq_to_bit(data->irq); - __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq))); - spin_unlock(&eint_lock); -} - -static void exynos4_irq_eint_unmask(struct irq_data *data) -{ - u32 mask; - - spin_lock(&eint_lock); - mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq))); - mask &= ~(eint_irq_to_bit(data->irq)); - __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq))); - spin_unlock(&eint_lock); -} - -static inline void exynos4_irq_eint_ack(struct irq_data *data) -{ - __raw_writel(eint_irq_to_bit(data->irq), - S5P_EINT_PEND(EINT_REG_NR(data->irq))); -} - -static void exynos4_irq_eint_maskack(struct irq_data *data) -{ - exynos4_irq_eint_mask(data); - exynos4_irq_eint_ack(data); -} - -static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type) -{ - int offs = EINT_OFFSET(data->irq); - int shift; - u32 ctrl, mask; - u32 newvalue = 0; - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - newvalue = S5P_IRQ_TYPE_EDGE_RISING; - break; - - case IRQ_TYPE_EDGE_FALLING: - newvalue = S5P_IRQ_TYPE_EDGE_FALLING; - break; - - case IRQ_TYPE_EDGE_BOTH: - newvalue = S5P_IRQ_TYPE_EDGE_BOTH; - break; - - case IRQ_TYPE_LEVEL_LOW: - newvalue = S5P_IRQ_TYPE_LEVEL_LOW; - break; - - case IRQ_TYPE_LEVEL_HIGH: - newvalue = S5P_IRQ_TYPE_LEVEL_HIGH; - break; - - default: - printk(KERN_ERR "No such irq type %d", type); - return -EINVAL; - } - - shift = (offs & 0x7) * 4; - mask = 0x7 << shift; - - spin_lock(&eint_lock); - ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq))); - ctrl &= ~mask; - ctrl |= newvalue << shift; - __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq))); - spin_unlock(&eint_lock); - - switch (offs) { - case 0 ... 7: - s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE); - break; - case 8 ... 15: - s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE); - break; - case 16 ... 23: - s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE); - break; - case 24 ... 31: - s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE); - break; - default: - printk(KERN_ERR "No such irq number %d", offs); - } - - return 0; -} - -static struct irq_chip exynos4_irq_eint = { - .name = "exynos4-eint", - .irq_mask = exynos4_irq_eint_mask, - .irq_unmask = exynos4_irq_eint_unmask, - .irq_mask_ack = exynos4_irq_eint_maskack, - .irq_ack = exynos4_irq_eint_ack, - .irq_set_type = exynos4_irq_eint_set_type, -#ifdef CONFIG_PM - .irq_set_wake = s3c_irqext_wake, -#endif -}; - -/* exynos4_irq_demux_eint - * - * This function demuxes the IRQ from from EINTs 16 to 31. - * It is designed to be inlined into the specific handler - * s5p_irq_demux_eintX_Y. - * - * Each EINT pend/mask registers handle eight of them. - */ -static inline void exynos4_irq_demux_eint(unsigned int start) -{ - unsigned int irq; - - u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start))); - u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start))); - - status &= ~mask; - status &= 0xff; - - while (status) { - irq = fls(status) - 1; - generic_handle_irq(irq + start); - status &= ~(1 << irq); - } -} - -static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) -{ - struct irq_chip *chip = irq_get_chip(irq); - chained_irq_enter(chip, desc); - exynos4_irq_demux_eint(IRQ_EINT(16)); - exynos4_irq_demux_eint(IRQ_EINT(24)); - chained_irq_exit(chip, desc); -} - -static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) -{ - u32 *irq_data = irq_get_handler_data(irq); - struct irq_chip *chip = irq_get_chip(irq); - - chained_irq_enter(chip, desc); - chip->irq_mask(&desc->irq_data); - - if (chip->irq_ack) - chip->irq_ack(&desc->irq_data); - - generic_handle_irq(*irq_data); - - chip->irq_unmask(&desc->irq_data); - chained_irq_exit(chip, desc); -} - -int __init exynos4_init_irq_eint(void) -{ - int irq; - - for (irq = 0 ; irq <= 31 ; irq++) { - irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint, - handle_level_irq); - set_irq_flags(IRQ_EINT(irq), IRQF_VALID); - } - - irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31); - - for (irq = 0 ; irq <= 15 ; irq++) { - eint0_15_data[irq] = IRQ_EINT(irq); - - irq_set_handler_data(exynos4_get_irq_nr(irq), - &eint0_15_data[irq]); - irq_set_chained_handler(exynos4_get_irq_nr(irq), - exynos4_irq_eint0_15); - } - - return 0; -} - -arch_initcall(exynos4_init_irq_eint); diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c index f0ca6c157d29..d726fcd3acf9 100644 --- a/arch/arm/mach-exynos/mach-armlex4210.c +++ b/arch/arm/mach-exynos/mach-armlex4210.c @@ -16,11 +16,11 @@ #include <linux/smsc911x.h> #include <asm/mach/arch.h> +#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <plat/cpu.h> #include <plat/devs.h> -#include <plat/exynos4.h> #include <plat/gpio-cfg.h> #include <plat/regs-serial.h> #include <plat/regs-srom.h> @@ -28,6 +28,8 @@ #include <mach/map.h> +#include "common.h" + /* Following are default values for UCON, ULCON and UFCON UART registers */ #define ARMLEX4210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -187,7 +189,7 @@ static void __init armlex4210_smsc911x_init(void) static void __init armlex4210_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(armlex4210_uartcfgs, ARRAY_SIZE(armlex4210_uartcfgs)); @@ -210,6 +212,8 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210") .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = armlex4210_map_io, + .handle_irq = gic_handle_irq, .init_machine = armlex4210_machine_init, .timer = &exynos4_timer, + .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c new file mode 100644 index 000000000000..85fa02767d67 --- /dev/null +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -0,0 +1,85 @@ +/* + * Samsung's Exynos4210 flattened device tree enabled machine + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/of_platform.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <mach/map.h> + +#include <plat/cpu.h> +#include <plat/regs-serial.h> +#include <plat/exynos4.h> + +/* + * The following lookup table is used to override device names when devices + * are registered from device tree. This is temporarily added to enable + * device tree support addition for the Exynos4 architecture. + * + * For drivers that require platform data to be provided from the machine + * file, a platform data pointer can also be supplied along with the + * devices names. Usually, the platform data elements that cannot be parsed + * from the device tree by the drivers (example: function pointers) are + * supplied. But it should be noted that this is a temporary mechanism and + * at some point, the drivers should be capable of parsing all the platform + * data from the device tree. + */ +static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART0, + "exynos4210-uart.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART1, + "exynos4210-uart.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART2, + "exynos4210-uart.2", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART3, + "exynos4210-uart.3", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0), + "exynos4-sdhci.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(1), + "exynos4-sdhci.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(2), + "exynos4-sdhci.2", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(3), + "exynos4-sdhci.3", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0), + "s3c2440-i2c.0", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL), + {}, +}; + +static void __init exynos4210_dt_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); +} + +static void __init exynos4210_dt_machine_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + exynos4210_auxdata_lookup, NULL); +} + +static char const *exynos4210_dt_compat[] __initdata = { + "samsung,exynos4210", + NULL +}; + +DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") + /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ + .init_irq = exynos4_init_irq, + .map_io = exynos4210_dt_map_io, + .init_machine = exynos4210_dt_machine_init, + .timer = &exynos4_timer, + .dt_compat = exynos4210_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 236bbe187163..b895ec031105 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -32,12 +32,12 @@ #include <media/v4l2-mediabus.h> #include <asm/mach/arch.h> +#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <plat/adc.h> #include <plat/regs-fb-v4.h> #include <plat/regs-serial.h> -#include <plat/exynos4.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/fb.h> @@ -54,6 +54,8 @@ #include <mach/map.h> +#include "common.h" + /* Following are default values for UCON, ULCON and UFCON UART registers */ #define NURI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -247,13 +249,8 @@ static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power) static int nuri_bl_init(struct device *dev) { - int ret, gpio = EXYNOS4_GPE2(3); - - ret = gpio_request(gpio, "LCD_LDO_EN"); - if (!ret) - gpio_direction_output(gpio, 0); - - return ret; + return gpio_request_one(EXYNOS4_GPE2(3), GPIOF_OUT_INIT_LOW, + "LCD_LD0_EN"); } static int nuri_bl_notify(struct device *dev, int brightness) @@ -1283,7 +1280,7 @@ static struct platform_device *nuri_devices[] __initdata = { static void __init nuri_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs)); } @@ -1333,7 +1330,9 @@ MACHINE_START(NURI, "NURI") .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = nuri_map_io, + .handle_irq = gic_handle_irq, .init_machine = nuri_machine_init, .timer = &exynos4_timer, .reserve = &nuri_reserve, + .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index f80b563f2be7..2b11e046d391 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -22,13 +22,13 @@ #include <linux/lcd.h> #include <asm/mach/arch.h> +#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <video/platform_lcd.h> #include <plat/regs-serial.h> #include <plat/regs-fb-v4.h> -#include <plat/exynos4.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/sdhci.h> @@ -41,8 +41,11 @@ #include <plat/fb.h> #include <plat/mfc.h> +#include <mach/ohci.h> #include <mach/map.h> +#include "common.h" + /* Following are default values for UCON, ULCON and UFCON UART registers */ #define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -483,6 +486,16 @@ static void __init origen_ehci_init(void) s5p_ehci_set_platdata(pdata); } +/* USB OHCI */ +static struct exynos4_ohci_platdata origen_ohci_pdata; + +static void __init origen_ohci_init(void) +{ + struct exynos4_ohci_platdata *pdata = &origen_ohci_pdata; + + exynos4_ohci_set_platdata(pdata); +} + static struct gpio_keys_button origen_gpio_keys_table[] = { { .code = KEY_MENU, @@ -606,6 +619,7 @@ static struct platform_device *origen_devices[] __initdata = { &s5p_device_mfc_l, &s5p_device_mfc_r, &s5p_device_mixer, + &exynos4_device_ohci, &exynos4_device_pd[PD_LCD0], &exynos4_device_pd[PD_TV], &exynos4_device_pd[PD_G3D], @@ -638,7 +652,7 @@ static void s5p_tv_setup(void) static void __init origen_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs)); } @@ -670,6 +684,7 @@ static void __init origen_machine_init(void) s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata); origen_ehci_init(); + origen_ohci_init(); clk_xusbxti.rate = 24000000; s5p_tv_setup(); @@ -694,7 +709,9 @@ MACHINE_START(ORIGEN, "ORIGEN") .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = origen_map_io, + .handle_irq = gic_handle_irq, .init_machine = origen_machine_init, .timer = &exynos4_timer, .reserve = &origen_reserve, + .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index fcf2e0e23d53..d00e4f016a68 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -21,13 +21,13 @@ #include <linux/serial_core.h> #include <asm/mach/arch.h> +#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <plat/backlight.h> #include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> -#include <plat/exynos4.h> #include <plat/gpio-cfg.h> #include <plat/iic.h> #include <plat/keypad.h> @@ -36,6 +36,8 @@ #include <mach/map.h> +#include "common.h" + /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -249,7 +251,7 @@ static void __init smdk4x12_map_io(void) { clk_xusbxti.rate = 24000000; - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + exynos_init_io(NULL, 0); s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs)); } @@ -287,8 +289,10 @@ MACHINE_START(SMDK4212, "SMDK4212") .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = smdk4x12_map_io, + .handle_irq = gic_handle_irq, .init_machine = smdk4x12_machine_init, .timer = &exynos4_timer, + .restart = exynos4_restart, MACHINE_END MACHINE_START(SMDK4412, "SMDK4412") @@ -297,6 +301,8 @@ MACHINE_START(SMDK4412, "SMDK4412") .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = smdk4x12_map_io, + .handle_irq = gic_handle_irq, .init_machine = smdk4x12_machine_init, .timer = &exynos4_timer, + .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index cec2afabe7b4..b2c5557f50e4 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -21,13 +21,13 @@ #include <linux/pwm_backlight.h> #include <asm/mach/arch.h> +#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <video/platform_lcd.h> #include <plat/regs-serial.h> #include <plat/regs-srom.h> #include <plat/regs-fb-v4.h> -#include <plat/exynos4.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/fb.h> @@ -42,6 +42,9 @@ #include <plat/clock.h> #include <mach/map.h> +#include <mach/ohci.h> + +#include "common.h" /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -129,9 +132,7 @@ static void lcd_lte480wv_set_power(struct plat_lcd_data *pd, gpio_free(EXYNOS4_GPD0(1)); #endif /* fire nRESET on power up */ - gpio_request(EXYNOS4_GPX0(6), "GPX0"); - - gpio_direction_output(EXYNOS4_GPX0(6), 1); + gpio_request_one(EXYNOS4_GPX0(6), GPIOF_OUT_INIT_HIGH, "GPX0"); mdelay(100); gpio_set_value(EXYNOS4_GPX0(6), 0); @@ -245,6 +246,16 @@ static void __init smdkv310_ehci_init(void) s5p_ehci_set_platdata(pdata); } +/* USB OHCI */ +static struct exynos4_ohci_platdata smdkv310_ohci_pdata; + +static void __init smdkv310_ohci_init(void) +{ + struct exynos4_ohci_platdata *pdata = &smdkv310_ohci_pdata; + + exynos4_ohci_set_platdata(pdata); +} + static struct platform_device *smdkv310_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, @@ -261,6 +272,7 @@ static struct platform_device *smdkv310_devices[] __initdata = { &s5p_device_fimc3, &exynos4_device_ac97, &exynos4_device_i2s0, + &exynos4_device_ohci, &samsung_device_keypad, &s5p_device_mfc, &s5p_device_mfc_l, @@ -332,7 +344,7 @@ static void s5p_tv_setup(void) static void __init smdkv310_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs)); } @@ -363,6 +375,7 @@ static void __init smdkv310_machine_init(void) s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata); smdkv310_ehci_init(); + smdkv310_ohci_init(); clk_xusbxti.rate = 24000000; platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); @@ -375,9 +388,11 @@ MACHINE_START(SMDKV310, "SMDKV310") .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = smdkv310_map_io, + .handle_irq = gic_handle_irq, .init_machine = smdkv310_machine_init, .timer = &exynos4_timer, .reserve = &smdkv310_reserve, + .restart = exynos4_restart, MACHINE_END MACHINE_START(SMDKC210, "SMDKC210") @@ -385,6 +400,8 @@ MACHINE_START(SMDKC210, "SMDKC210") .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = smdkv310_map_io, + .handle_irq = gic_handle_irq, .init_machine = smdkv310_machine_init, .timer = &exynos4_timer, + .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index a2a177ff4b44..37ac93e8d6d9 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -24,10 +24,10 @@ #include <linux/i2c/atmel_mxt_ts.h> #include <asm/mach/arch.h> +#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <plat/regs-serial.h> -#include <plat/exynos4.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/iic.h> @@ -47,6 +47,8 @@ #include <media/s5p_fimc.h> #include <media/m5mols.h> +#include "common.h" + /* Following are default values for UCON, ULCON and UFCON UART registers */ #define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -608,8 +610,7 @@ static void __init universal_tsp_init(void) /* TSP_LDO_ON: XMDMADDR_11 */ gpio = EXYNOS4_GPE2(3); - gpio_request(gpio, "TSP_LDO_ON"); - gpio_direction_output(gpio, 1); + gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON"); gpio_export(gpio, 0); /* TSP_INT: XMDMADDR_7 */ @@ -669,8 +670,7 @@ static void __init universal_touchkey_init(void) i2c_gpio12_devs[0].irq = gpio_to_irq(gpio); gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */ - gpio_request(gpio, "3_TOUCH_EN"); - gpio_direction_output(gpio, 1); + gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "3_TOUCH_EN"); } static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = { @@ -992,7 +992,7 @@ static struct platform_device *universal_devices[] __initdata = { static void __init universal_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); } @@ -1000,9 +1000,7 @@ static void __init universal_map_io(void) void s5p_tv_setup(void) { /* direct HPD to HDMI chip */ - gpio_request(EXYNOS4_GPX3(7), "hpd-plug"); - - gpio_direction_input(EXYNOS4_GPX3(7)); + gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"); s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3)); s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE); @@ -1058,7 +1056,9 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = universal_map_io, + .handle_irq = gic_handle_irq, .init_machine = universal_machine_init, .timer = &exynos4_timer, .reserve = &universal_reserve, + .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index 97343df8f132..85b5527d0918 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -44,8 +44,6 @@ struct mct_clock_event_device { char name[10]; }; -static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick); - static void exynos4_mct_write(unsigned int value, void *addr) { void __iomem *stat_addr; @@ -264,6 +262,9 @@ static void exynos4_clockevent_init(void) } #ifdef CONFIG_LOCAL_TIMERS + +static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick); + /* Clock event handling */ static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt) { @@ -428,9 +429,13 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt) void local_timer_stop(struct clock_event_device *evt) { + unsigned int cpu = smp_processor_id(); evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); if (mct_int_type == MCT_INT_SPI) - disable_irq(evt->irq); + if (cpu == 0) + remove_irq(evt->irq, &mct_tick0_event_irq); + else + remove_irq(evt->irq, &mct_tick1_event_irq); else disable_percpu_irq(IRQ_MCT_LOCALTIMER); } @@ -443,6 +448,7 @@ static void __init exynos4_timer_resources(void) clk_rate = clk_get_rate(mct_clk); +#ifdef CONFIG_LOCAL_TIMERS if (mct_int_type == MCT_INT_PPI) { int err; @@ -452,6 +458,7 @@ static void __init exynos4_timer_resources(void) WARN(err, "MCT: can't request IRQ %d (%d)\n", IRQ_MCT_LOCALTIMER, err); } +#endif /* CONFIG_LOCAL_TIMERS */ } static void __init exynos4_timer_init(void) diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 69ffb2fb3875..60bc45e3e709 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -32,7 +32,6 @@ #include <plat/cpu.h> -extern unsigned int gic_bank_offset; extern void exynos4_secondary_startup(void); #define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ @@ -65,31 +64,6 @@ static void __iomem *scu_base_addr(void) static DEFINE_SPINLOCK(boot_lock); -static void __cpuinit exynos4_gic_secondary_init(void) -{ - void __iomem *dist_base = S5P_VA_GIC_DIST + - (gic_bank_offset * smp_processor_id()); - void __iomem *cpu_base = S5P_VA_GIC_CPU + - (gic_bank_offset * smp_processor_id()); - int i; - - /* - * Deal with the banked PPI and SGI interrupts - disable all - * PPI interrupts, ensure all SGI interrupts are enabled. - */ - __raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR); - __raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET); - - /* - * Set priority on PPI and SGI interrupts - */ - for (i = 0; i < 32; i += 4) - __raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4); - - __raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK); - __raw_writel(1, cpu_base + GIC_CPU_CTRL); -} - void __cpuinit platform_secondary_init(unsigned int cpu) { /* @@ -97,7 +71,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - exynos4_gic_secondary_init(); + gic_secondary_init(0); /* * let the primary processor know we're out of the diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 509a435afd4b..a4f61a43c7ba 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -23,6 +23,7 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> +#include <asm/smp_scu.h> #include <plat/cpu.h> #include <plat/pm.h> @@ -205,7 +206,7 @@ static void exynos4_pm_prepare(void) } -static int exynos4_pm_add(struct sys_device *sysdev) +static int exynos4_pm_add(struct device *dev) { pm_cpu_prep = exynos4_pm_prepare; pm_cpu_sleep = exynos4_cpu_suspend; @@ -213,27 +214,6 @@ static int exynos4_pm_add(struct sys_device *sysdev) return 0; } -/* This function copy from linux/arch/arm/kernel/smp_scu.c */ - -void exynos4_scu_enable(void __iomem *scu_base) -{ - u32 scu_ctrl; - - scu_ctrl = __raw_readl(scu_base); - /* already enabled? */ - if (scu_ctrl & 1) - return; - - scu_ctrl |= 1; - __raw_writel(scu_ctrl, scu_base); - - /* - * Ensure that the data accessed by CPU0 before the SCU was - * initialised is visible to the other CPUs. - */ - flush_cache_all(); -} - static unsigned long pll_base_rate; static void exynos4_restore_pll(void) @@ -301,8 +281,10 @@ static void exynos4_restore_pll(void) } while (epll_wait || vpll_wait); } -static struct sysdev_driver exynos4_pm_driver = { - .add = exynos4_pm_add, +static struct subsys_interface exynos4_pm_interface = { + .name = "exynos4_pm", + .subsys = &exynos4_subsys, + .add_dev = exynos4_pm_add, }; static __init int exynos4_pm_drvinit(void) @@ -325,7 +307,7 @@ static __init int exynos4_pm_drvinit(void) clk_put(pll_base); } - return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver); + return subsys_interface_register(&exynos4_pm_interface); } arch_initcall(exynos4_pm_drvinit); @@ -402,7 +384,7 @@ static void exynos4_pm_resume(void) exynos4_restore_pll(); - exynos4_scu_enable(S5P_VA_SCU); + scu_enable(S5P_VA_SCU); #ifdef CONFIG_CACHE_L2X0 s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); diff --git a/arch/arm/mach-exynos/setup-sdhci.c b/arch/arm/mach-exynos/setup-sdhci.c deleted file mode 100644 index 92937b410906..000000000000 --- a/arch/arm/mach-exynos/setup-sdhci.c +++ /dev/null @@ -1,22 +0,0 @@ -/* linux/arch/arm/mach-exynos4/setup-sdhci.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - Helper functions for settign up SDHCI device(s) (HSMMC) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/types.h> - -/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ - -char *exynos4_hsmmc_clksrcs[4] = { - [0] = NULL, - [1] = NULL, - [2] = "sclk_mmc", /* mmc_bus */ - [3] = NULL, -}; diff --git a/arch/arm/mach-exynos/setup-spi.c b/arch/arm/mach-exynos/setup-spi.c new file mode 100644 index 000000000000..833ff40ee0e8 --- /dev/null +++ b/arch/arm/mach-exynos/setup-spi.c @@ -0,0 +1,72 @@ +/* linux/arch/arm/mach-exynos4/setup-spi.c + * + * Copyright (C) 2011 Samsung Electronics Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <linux/platform_device.h> + +#include <plat/gpio-cfg.h> +#include <plat/s3c64xx-spi.h> + +#ifdef CONFIG_S3C64XX_DEV_SPI0 +struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = { + .fifo_lvl_mask = 0x1ff, + .rx_lvl_offset = 15, + .high_speed = 1, + .clk_from_cmu = true, + .tx_st_done = 25, +}; + +int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; +} +#endif + +#ifdef CONFIG_S3C64XX_DEV_SPI1 +struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = { + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 15, + .high_speed = 1, + .clk_from_cmu = true, + .tx_st_done = 25, +}; + +int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; +} +#endif + +#ifdef CONFIG_S3C64XX_DEV_SPI2 +struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = { + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 15, + .high_speed = 1, + .clk_from_cmu = true, + .tx_st_done = 25, +}; + +int s3c64xx_spi2_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5)); + s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2, + S3C_GPIO_SFN(5), S3C_GPIO_PULL_UP); + return 0; +} +#endif diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c index 39aca045f660..41743d21e8c6 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -19,6 +19,13 @@ #include <plat/cpu.h> #include <plat/usb-phy.h> +static atomic_t host_usage; + +static int exynos4_usb_host_phy_is_on(void) +{ + return (readl(EXYNOS4_PHYPWR) & PHY1_STD_ANALOG_POWERDOWN) ? 0 : 1; +} + static int exynos4_usb_phy1_init(struct platform_device *pdev) { struct clk *otg_clk; @@ -27,6 +34,8 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev) u32 rstcon; int err; + atomic_inc(&host_usage); + otg_clk = clk_get(&pdev->dev, "otg"); if (IS_ERR(otg_clk)) { dev_err(&pdev->dev, "Failed to get otg clock\n"); @@ -39,6 +48,9 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev) return err; } + if (exynos4_usb_host_phy_is_on()) + return 0; + writel(readl(S5P_USBHOST_PHY_CONTROL) | S5P_USBHOST_PHY_ENABLE, S5P_USBHOST_PHY_CONTROL); @@ -95,6 +107,9 @@ static int exynos4_usb_phy1_exit(struct platform_device *pdev) struct clk *otg_clk; int err; + if (atomic_dec_return(&host_usage) > 0) + return 0; + otg_clk = clk_get(&pdev->dev, "otg"); if (IS_ERR(otg_clk)) { dev_err(&pdev->dev, "Failed to get otg clock\n"); diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c index d5f178540928..25b453601acc 100644 --- a/arch/arm/mach-footbridge/cats-hw.c +++ b/arch/arm/mach-footbridge/cats-hw.c @@ -86,9 +86,10 @@ fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi) MACHINE_START(CATS, "Chalice-CATS") /* Maintainer: Philip Blundell */ .atag_offset = 0x100, - .soft_reboot = 1, + .restart_mode = 's', .fixup = fixup_cats, .map_io = footbridge_map_io, .init_irq = footbridge_init_irq, .timer = &isa_timer, + .restart = footbridge_restart, MACHINE_END diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 38a44f9b9da2..41978ee4f9d0 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -199,6 +199,33 @@ void __init footbridge_map_io(void) iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc)); } +void footbridge_restart(char mode, const char *cmd) +{ + if (mode == 's') { + /* Jump into the ROM */ + soft_restart(0x41000000); + } else { + /* + * Force the watchdog to do a CPU reset. + * + * After making sure that the watchdog is disabled + * (so we can change the timer registers) we first + * enable the timer to autoreload itself. Next, the + * timer interval is set really short and any + * current interrupt request is cleared (so we can + * see an edge transition). Finally, TIMER4 is + * enabled as the watchdog. + */ + *CSR_SA110_CNTL &= ~(1 << 13); + *CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE | + TIMER_CNTL_AUTORELOAD | + TIMER_CNTL_DIV16; + *CSR_TIMER4_LOAD = 0x2; + *CSR_TIMER4_CLR = 0; + *CSR_SA110_CNTL |= (1 << 13); + } +} + #ifdef CONFIG_FOOTBRIDGE_ADDIN static inline unsigned long fb_bus_sdram_offset(void) diff --git a/arch/arm/mach-footbridge/common.h b/arch/arm/mach-footbridge/common.h index b05e662d21ad..c9767b892cb2 100644 --- a/arch/arm/mach-footbridge/common.h +++ b/arch/arm/mach-footbridge/common.h @@ -8,3 +8,4 @@ extern void footbridge_map_io(void); extern void footbridge_init_irq(void); extern void isa_init_irq(unsigned int irq); +extern void footbridge_restart(char, const char *); diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 18c32a5541d9..f685650c25d7 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -275,9 +275,9 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys) allocate_resource(&iomem_resource, &res[0], 0x40000000, 0x80000000, 0xffffffff, 0x40000000, NULL, NULL); - sys->resource[0] = &ioport_resource; - sys->resource[1] = &res[0]; - sys->resource[2] = &res[1]; + pci_add_resource(&sys->resources, &ioport_resource); + pci_add_resource(&sys->resources, &res[0]); + pci_add_resource(&sys->resources, &res[1]); sys->mem_offset = DC21285_PCI_MEM; return 1; @@ -285,7 +285,7 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys) struct pci_bus * __init dc21285_scan_bus(int nr, struct pci_sys_data *sys) { - return pci_scan_bus(0, &dc21285_ops, sys); + return pci_scan_root_bus(NULL, 0, &dc21285_ops, sys, &sys->resources); } #define dc21285_request_irq(_a, _b, _c, _d, _e) \ diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c index 012210cf7d16..27716a7e5fc1 100644 --- a/arch/arm/mach-footbridge/ebsa285.c +++ b/arch/arm/mach-footbridge/ebsa285.c @@ -21,5 +21,6 @@ MACHINE_START(EBSA285, "EBSA285") .map_io = footbridge_map_io, .init_irq = footbridge_init_irq, .timer = &footbridge_timer, + .restart = footbridge_restart, MACHINE_END diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h index 0b2931566209..a174a5841bc2 100644 --- a/arch/arm/mach-footbridge/include/mach/system.h +++ b/arch/arm/mach-footbridge/include/mach/system.h @@ -7,63 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/io.h> -#include <asm/hardware/dec21285.h> -#include <mach/hardware.h> -#include <asm/leds.h> -#include <asm/mach-types.h> - static inline void arch_idle(void) { cpu_do_idle(); } - -static inline void arch_reset(char mode, const char *cmd) -{ - if (mode == 's') { - /* - * Jump into the ROM - */ - cpu_reset(0x41000000); - } else { - if (machine_is_netwinder()) { - /* open up the SuperIO chip - */ - outb(0x87, 0x370); - outb(0x87, 0x370); - - /* aux function group 1 (logical device 7) - */ - outb(0x07, 0x370); - outb(0x07, 0x371); - - /* set GP16 for WD-TIMER output - */ - outb(0xe6, 0x370); - outb(0x00, 0x371); - - /* set a RED LED and toggle WD_TIMER for rebooting - */ - outb(0xc4, 0x338); - } else { - /* - * Force the watchdog to do a CPU reset. - * - * After making sure that the watchdog is disabled - * (so we can change the timer registers) we first - * enable the timer to autoreload itself. Next, the - * timer interval is set really short and any - * current interrupt request is cleared (so we can - * see an edge transition). Finally, TIMER4 is - * enabled as the watchdog. - */ - *CSR_SA110_CNTL &= ~(1 << 13); - *CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE | - TIMER_CNTL_AUTORELOAD | - TIMER_CNTL_DIV16; - *CSR_TIMER4_LOAD = 0x2; - *CSR_TIMER4_CLR = 0; - *CSR_SA110_CNTL |= (1 << 13); - } - } -} diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h deleted file mode 100644 index 40ba78e5782b..000000000000 --- a/arch/arm/mach-footbridge/include/mach/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-footbridge/include/mach/vmalloc.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - -#define VMALLOC_END 0xf0000000UL diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c index 0d3846f3b60d..80a1c5cc9071 100644 --- a/arch/arm/mach-footbridge/netwinder-hw.c +++ b/arch/arm/mach-footbridge/netwinder-hw.c @@ -645,6 +645,32 @@ fixup_netwinder(struct tag *tags, char **cmdline, struct meminfo *mi) #endif } +static void netwinder_restart(char mode, const char *cmd) +{ + if (mode == 's') { + /* Jump into the ROM */ + soft_restart(0x41000000); + } else { + local_irq_disable(); + local_fiq_disable(); + + /* open up the SuperIO chip */ + outb(0x87, 0x370); + outb(0x87, 0x370); + + /* aux function group 1 (logical device 7) */ + outb(0x07, 0x370); + outb(0x07, 0x371); + + /* set GP16 for WD-TIMER output */ + outb(0xe6, 0x370); + outb(0x00, 0x371); + + /* set a RED LED and toggle WD_TIMER for rebooting */ + outb(0xc4, 0x338); + } +} + MACHINE_START(NETWINDER, "Rebel-NetWinder") /* Maintainer: Russell King/Rebel.com */ .atag_offset = 0x100, @@ -656,4 +682,5 @@ MACHINE_START(NETWINDER, "Rebel-NetWinder") .map_io = footbridge_map_io, .init_irq = footbridge_init_irq, .timer = &isa_timer, + .restart = netwinder_restart, MACHINE_END diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c index f41dba39b327..e1e9990fa957 100644 --- a/arch/arm/mach-footbridge/personal.c +++ b/arch/arm/mach-footbridge/personal.c @@ -19,5 +19,6 @@ MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer") .map_io = footbridge_map_io, .init_irq = footbridge_init_irq, .timer = &footbridge_timer, + .restart = footbridge_restart, MACHINE_END diff --git a/arch/arm/mach-gemini/include/mach/vmalloc.h b/arch/arm/mach-gemini/include/mach/vmalloc.h deleted file mode 100644 index 45371eb86fcb..000000000000 --- a/arch/arm/mach-gemini/include/mach/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#define VMALLOC_END 0xf0000000UL diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c index 51d4e44ab973..f8a2f6bb5483 100644 --- a/arch/arm/mach-h720x/common.c +++ b/arch/arm/mach-h720x/common.c @@ -242,3 +242,8 @@ void __init h720x_map_io(void) { iotable_init(h720x_io_desc,ARRAY_SIZE(h720x_io_desc)); } + +void h720x_restart(char mode, const char *cmd) +{ + CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET; +} diff --git a/arch/arm/mach-h720x/common.h b/arch/arm/mach-h720x/common.h index 7dd5fa604efc..2489537d33dd 100644 --- a/arch/arm/mach-h720x/common.h +++ b/arch/arm/mach-h720x/common.h @@ -16,6 +16,7 @@ extern unsigned long h720x_gettimeoffset(void); extern void __init h720x_init_irq(void); extern void __init h720x_map_io(void); +extern void h720x_restart(char, const char *); #ifdef CONFIG_ARCH_H7202 extern struct sys_timer h7202_timer; diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c index 9886f19805f4..5fdb20c855e2 100644 --- a/arch/arm/mach-h720x/h7201-eval.c +++ b/arch/arm/mach-h720x/h7201-eval.c @@ -34,4 +34,5 @@ MACHINE_START(H7201, "Hynix GMS30C7201") .init_irq = h720x_init_irq, .timer = &h7201_timer, .dma_zone_size = SZ_256M, + .restart = h720x_restart, MACHINE_END diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c index 284a134819e1..169673036c59 100644 --- a/arch/arm/mach-h720x/h7202-eval.c +++ b/arch/arm/mach-h720x/h7202-eval.c @@ -77,4 +77,5 @@ MACHINE_START(H7202, "Hynix HMS30C7202") .timer = &h7202_timer, .init_machine = init_eval_h7202, .dma_zone_size = SZ_256M, + .restart = h720x_restart, MACHINE_END diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h index a708d24ee46d..16ac46e239aa 100644 --- a/arch/arm/mach-h720x/include/mach/system.h +++ b/arch/arm/mach-h720x/include/mach/system.h @@ -24,10 +24,4 @@ static void arch_idle(void) nop(); } - -static __inline__ void arch_reset(char mode, const char *cmd) -{ - CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET; -} - #endif diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h deleted file mode 100644 index 8520b4a4d4e6..000000000000 --- a/arch/arm/mach-h720x/include/mach/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/vmalloc.h - */ - -#ifndef __ARCH_ARM_VMALLOC_H -#define __ARCH_ARM_VMALLOC_H - -#define VMALLOC_END 0xd0000000UL - -#endif diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h index 7e33fc94cd1e..d8e2d0be64ac 100644 --- a/arch/arm/mach-highbank/core.h +++ b/arch/arm/mach-highbank/core.h @@ -1,5 +1,6 @@ extern void highbank_set_cpu_jump(int cpu, void *jump_addr); extern void highbank_clocks_init(void); +extern void highbank_restart(char, const char *); extern void __iomem *scu_base_addr; #ifdef CONFIG_DEBUG_HIGHBANK_UART extern void highbank_lluart_map_io(void); diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 88660d500f5b..804c4a55f803 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -144,6 +144,8 @@ DT_MACHINE_START(HIGHBANK, "Highbank") .map_io = highbank_map_io, .init_irq = highbank_init_irq, .timer = &highbank_timer, + .handle_irq = gic_handle_irq, .init_machine = highbank_init, .dt_compat = highbank_match, + .restart = highbank_restart, MACHINE_END diff --git a/arch/arm/mach-highbank/include/mach/entry-macro.S b/arch/arm/mach-highbank/include/mach/entry-macro.S index 73c11297509e..a14f9e62ca92 100644 --- a/arch/arm/mach-highbank/include/mach/entry-macro.S +++ b/arch/arm/mach-highbank/include/mach/entry-macro.S @@ -1,5 +1,3 @@ -#include <asm/hardware/entry-macro-gic.S> - .macro disable_fiq .endm diff --git a/arch/arm/mach-highbank/include/mach/system.h b/arch/arm/mach-highbank/include/mach/system.h index 7e8192296cae..b1d8b5fbe373 100644 --- a/arch/arm/mach-highbank/include/mach/system.h +++ b/arch/arm/mach-highbank/include/mach/system.h @@ -21,6 +21,4 @@ static inline void arch_idle(void) cpu_do_idle(); } -extern void arch_reset(char mode, const char *cmd); - #endif diff --git a/arch/arm/mach-highbank/include/mach/vmalloc.h b/arch/arm/mach-highbank/include/mach/vmalloc.h deleted file mode 100644 index 1969e954277a..000000000000 --- a/arch/arm/mach-highbank/include/mach/vmalloc.h +++ /dev/null @@ -1 +0,0 @@ -#define VMALLOC_END 0xFEE00000UL diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c index 53f0c4c5ef1c..82c27230d4a9 100644 --- a/arch/arm/mach-highbank/system.c +++ b/arch/arm/mach-highbank/system.c @@ -20,7 +20,7 @@ #include "core.h" #include "sysregs.h" -void arch_reset(char mode, const char *cmd) +void highbank_restart(char mode, const char *cmd) { if (mode == 'h') hignbank_set_pwr_hard_reset(); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index c44aa974e79c..0e6de366c648 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -98,6 +98,7 @@ config MACH_SCB9328 config MACH_APF9328 bool "APF9328" select SOC_IMX1 + select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART help Say Yes here if you are using the Armadeus APF9328 development board @@ -132,7 +133,7 @@ config MACH_MX25_3DS select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX -config MACH_EUKREA_CPUIMX25 +config MACH_EUKREA_CPUIMX25SD bool "Support Eukrea CPUIMX25 Platform" select SOC_IMX25 select IMX_HAVE_PLATFORM_FLEXCAN @@ -148,7 +149,7 @@ config MACH_EUKREA_CPUIMX25 choice prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX25 + depends on MACH_EUKREA_CPUIMX25SD default MACH_EUKREA_MBIMXSD25_BASEBOARD config MACH_EUKREA_MBIMXSD25_BASEBOARD @@ -542,7 +543,7 @@ config MACH_MX35_3DS Include support for MX35PDK platform. This includes specific configurations for the board and its peripherals. -config MACH_EUKREA_CPUIMX35 +config MACH_EUKREA_CPUIMX35SD bool "Support Eukrea CPUIMX35 Platform" select SOC_IMX35 select IMX_HAVE_PLATFORM_FLEXCAN @@ -560,7 +561,7 @@ config MACH_EUKREA_CPUIMX35 choice prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX35 + depends on MACH_EUKREA_CPUIMX35SD default MACH_EUKREA_MBIMXSD35_BASEBOARD config MACH_EUKREA_MBIMXSD35_BASEBOARD @@ -595,13 +596,14 @@ comment "i.MX6 family:" config SOC_IMX6Q bool "i.MX6 Quad support" + select ARM_CPU_SUSPEND if PM select ARM_GIC - select CACHE_L2X0 select CPU_V7 select HAVE_ARM_SCU select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC + select HAVE_SMP select USE_OF help diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index aba73214c2a8..f5920c24f7d7 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -24,7 +24,7 @@ obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o # i.MX25 based machines obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o # i.MX27 based machines @@ -57,7 +57,7 @@ obj-$(CONFIG_MACH_BUG) += mach-bug.o # i.MX35 based machines obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o @@ -70,4 +70,8 @@ AFLAGS_head-v7.o :=-Wa,-march=armv7-a obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o -obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o pm-imx6q.o +obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o + +ifeq ($(CONFIG_PM),y) +obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o +endif diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index cfede5768aa0..5f4d06af4912 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -25,3 +25,6 @@ initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000 zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000 params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000 + +dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ + imx6q-sabrelite.dtb diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c index 8116f119517d..ac8238caecb9 100644 --- a/arch/arm/mach-imx/clock-imx35.c +++ b/arch/arm/mach-imx/clock-imx35.c @@ -507,7 +507,7 @@ static struct clk_lookup lookups[] = { int __init mx35_clocks_init() { - unsigned int cgr2 = 3 << 26, cgr3 = 0; + unsigned int cgr2 = 3 << 26; #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC) cgr2 |= 3 << 16; @@ -521,6 +521,12 @@ int __init mx35_clocks_init() __raw_writel((3 << 18), CCM_BASE + CCM_CGR0); __raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16), CCM_BASE + CCM_CGR1); + __raw_writel(cgr2, CCM_BASE + CCM_CGR2); + __raw_writel(0, CCM_BASE + CCM_CGR3); + + clk_enable(&iim_clk); + imx_print_silicon_rev("i.MX35", mx35_revision()); + clk_disable(&iim_clk); /* * Check if we came up in internal boot mode. If yes, we need some @@ -529,17 +535,11 @@ int __init mx35_clocks_init() */ if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) { /* Additionally turn on UART1, SCC, and IIM clocks */ - cgr2 |= 3 << 16 | 3 << 4; - cgr3 |= 3 << 2; + clk_enable(&iim_clk); + clk_enable(&uart1_clk); + clk_enable(&scc_clk); } - __raw_writel(cgr2, CCM_BASE + CCM_CGR2); - __raw_writel(cgr3, CCM_BASE + CCM_CGR3); - - clk_enable(&iim_clk); - imx_print_silicon_rev("i.MX35", mx35_revision()); - clk_disable(&iim_clk); - #ifdef CONFIG_MXC_USE_EPIT epit_timer_init(&epit1_clk, MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c index 039a7abb165a..9273c2a24b54 100644 --- a/arch/arm/mach-imx/clock-imx6q.c +++ b/arch/arm/mach-imx/clock-imx6q.c @@ -1931,14 +1931,12 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) val |= 0x1 << BP_CLPCR_LPM; val &= ~BM_CLPCR_VSTBY; val &= ~BM_CLPCR_SBYOS; - val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; break; case STOP_POWER_OFF: val |= 0x2 << BP_CLPCR_LPM; val |= 0x3 << BP_CLPCR_STBY_COUNT; val |= BM_CLPCR_VSTBY; val |= BM_CLPCR_SBYOS; - val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; break; default: return -EINVAL; diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/head-v7.S index 6229efbc70cb..7e49deb128a4 100644 --- a/arch/arm/mach-imx/head-v7.S +++ b/arch/arm/mach-imx/head-v7.S @@ -16,7 +16,6 @@ #include <asm/hardware/cache-l2x0.h> .section ".text.head", "ax" - __CPUINIT /* * The secondary kernel init calls v7_flush_dcache_all before it enables @@ -33,6 +32,7 @@ */ ENTRY(v7_invalidate_l1) mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 2, r0, c0, c0, 0 mrc p15, 1, r0, c0, c0, 0 @@ -71,6 +71,7 @@ ENTRY(v7_secondary_startup) ENDPROC(v7_secondary_startup) #endif +#ifdef CONFIG_PM /* * The following code is located into the .data section. This is to * allow phys_l2x0_saved_regs to be accessed with a relative load @@ -79,6 +80,7 @@ ENDPROC(v7_secondary_startup) .data .align +#ifdef CONFIG_CACHE_L2X0 .macro pl310_resume ldr r2, phys_l2x0_saved_regs ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0 @@ -88,12 +90,17 @@ ENDPROC(v7_secondary_startup) str r1, [r0, #L2X0_CTRL] @ re-enable L2 .endm + .globl phys_l2x0_saved_regs +phys_l2x0_saved_regs: + .long 0 +#else + .macro pl310_resume + .endm +#endif + ENTRY(v7_cpu_resume) bl v7_invalidate_l1 pl310_resume b cpu_resume ENDPROC(v7_cpu_resume) - - .globl phys_l2x0_saved_regs -phys_l2x0_saved_regs: - .long 0 +#endif diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c index 1e486e67dabb..f4a63ee9e217 100644 --- a/arch/arm/mach-imx/mach-apf9328.c +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -18,6 +18,7 @@ #include <linux/platform_device.h> #include <linux/mtd/physmap.h> #include <linux/dm9000.h> +#include <linux/i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -41,6 +42,9 @@ static const int apf9328_pins[] __initconst = { PB29_PF_UART2_RTS, PB30_PF_UART2_TXD, PB31_PF_UART2_RXD, + /* I2C */ + PA15_PF_I2C_SDA, + PA16_PF_I2C_SCL, }; /* @@ -103,6 +107,10 @@ static const struct imxuart_platform_data uart1_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; +static const struct imxi2c_platform_data apf9328_i2c_data __initconst = { + .bitrate = 100000, +}; + static struct platform_device *devices[] __initdata = { &apf9328_flash_device, &dm9000x_device, @@ -119,6 +127,8 @@ static void __init apf9328_init(void) imx1_add_imx_uart0(NULL); imx1_add_imx_uart1(&uart1_pdata); + imx1_add_imx_i2c(&apf9328_i2c_data); + platform_add_devices(devices, ARRAY_SIZE(devices)); } @@ -139,4 +149,5 @@ MACHINE_START(APF9328, "Armadeus APF9328") .handle_irq = imx1_handle_irq, .timer = &apf9328_timer, .init_machine = apf9328_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index c9a9cf67755e..e4f426a09899 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -561,4 +561,5 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500") .handle_irq = imx31_handle_irq, .timer = &armadillo5x0_timer, .init_machine = armadillo5x0_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c index 313f62ddc1ef..9a9897749dd6 100644 --- a/arch/arm/mach-imx/mach-bug.c +++ b/arch/arm/mach-imx/mach-bug.c @@ -65,4 +65,5 @@ MACHINE_START(BUG, "BugLabs BUGBase") .handle_irq = imx31_handle_irq, .timer = &bug_timer, .init_machine = bug_board_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index edb373052576..d085aea08709 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -318,4 +318,5 @@ MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27") .handle_irq = imx27_handle_irq, .timer = &eukrea_cpuimx27_timer, .init_machine = eukrea_cpuimx27_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 66af2e8f7e57..8ecc872b2547 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -53,12 +53,18 @@ static const struct imxi2c_platform_data .bitrate = 100000, }; +#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2) +static int tsc2007_get_pendown_state(void) +{ + return !gpio_get_value(TSC2007_IRQGPIO); +} + static struct tsc2007_platform_data tsc2007_info = { .model = 2007, .x_plate_ohms = 180, + .get_pendown_state = tsc2007_get_pendown_state, }; -#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2) static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { { I2C_BOARD_INFO("pcf8563", 0x51), @@ -201,4 +207,5 @@ MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35") .handle_irq = imx35_handle_irq, .timer = &eukrea_cpuimx35_timer, .init_machine = eukrea_cpuimx35_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index ab8fbcc472b5..76a97a598b9e 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -170,4 +170,5 @@ MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25") .handle_irq = imx25_handle_irq, .timer = &eukrea_cpuimx25_timer, .init_machine = eukrea_cpuimx25_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 38eb9e45110b..c2766ae02b4f 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -282,4 +282,5 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") .handle_irq = imx27_handle_irq, .timer = &visstrim_m10_timer, .init_machine = visstrim_m10_board_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index 7052155d0557..c9d350c5dcc8 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -78,4 +78,5 @@ MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM") .handle_irq = imx27_handle_irq, .timer = &mx27ipcam_timer, .init_machine = mx27ipcam_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index 8d6a63521f17..1f45b9189229 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -84,4 +84,5 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") .handle_irq = imx27_handle_irq, .timer = &mx27lite_timer, .init_machine = mx27lite_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 9cd860a27af5..c25728106917 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -10,12 +10,17 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <linux/delay.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/irq.h> #include <linux/irqdomain.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <linux/phy.h> +#include <linux/micrel_phy.h> #include <asm/hardware/cache-l2x0.h> #include <asm/hardware/gic.h> #include <asm/mach/arch.h> @@ -23,8 +28,57 @@ #include <mach/common.h> #include <mach/hardware.h> +void imx6q_restart(char mode, const char *cmd) +{ + struct device_node *np; + void __iomem *wdog_base; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-wdt"); + wdog_base = of_iomap(np, 0); + if (!wdog_base) + goto soft; + + imx_src_prepare_restart(); + + /* enable wdog */ + writew_relaxed(1 << 2, wdog_base); + /* write twice to ensure the request will not get ignored */ + writew_relaxed(1 << 2, wdog_base); + + /* wait for reset to assert ... */ + mdelay(500); + + pr_err("Watchdog reset failed to assert reset\n"); + + /* delay to allow the serial port to show the message */ + mdelay(50); + +soft: + /* we'll take a jump through zero as a poor second */ + soft_restart(0); +} + +/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ +static int ksz9021rn_phy_fixup(struct phy_device *phydev) +{ + /* min rx data delay */ + phy_write(phydev, 0x0b, 0x8105); + phy_write(phydev, 0x0c, 0x0000); + + /* max rx/tx clock delay, min rx/tx control delay */ + phy_write(phydev, 0x0b, 0x8104); + phy_write(phydev, 0x0c, 0xf0f0); + phy_write(phydev, 0x0b, 0x104); + + return 0; +} + static void __init imx6q_init_machine(void) { + if (of_machine_is_compatible("fsl,imx6q-sabrelite")) + phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, + ksz9021rn_phy_fixup); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); imx6q_pm_init(); @@ -37,14 +91,15 @@ static void __init imx6q_map_io(void) imx6q_clock_map_io(); } -static void __init imx6q_gpio_add_irq_domain(struct device_node *np, +static int __init imx6q_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 7; /* imx6q gets 7 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx6q_irq_match[] __initconst = { @@ -71,7 +126,8 @@ static struct sys_timer imx6q_timer = { }; static const char *imx6q_dt_compat[] __initdata = { - "fsl,imx6q-sabreauto", + "fsl,imx6q-arm2", + "fsl,imx6q-sabrelite", NULL, }; @@ -82,4 +138,5 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)") .timer = &imx6q_timer, .init_machine = imx6q_init_machine, .dt_compat = imx6q_dt_compat, + .restart = imx6q_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 5f37f89e40fa..fc78e8071cd1 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -279,4 +279,5 @@ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") .handle_irq = imx31_handle_irq, .timer = &kzm_timer, .init_machine = kzm_board_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index fc49785e7340..97046088ff1a 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -147,6 +147,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS") .handle_irq = imx1_handle_irq, .timer = &mx1ads_timer, .init_machine = mx1ads_init, + .restart = mxc_restart, MACHINE_END MACHINE_START(MXLADS, "Freescale MXLADS") @@ -157,4 +158,5 @@ MACHINE_START(MXLADS, "Freescale MXLADS") .handle_irq = imx1_handle_irq, .timer = &mx1ads_timer, .init_machine = mx1ads_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 25f84028d055..8d9f95514b1f 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -312,4 +312,5 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS") .handle_irq = imx21_handle_irq, .timer = &mx21ads_timer, .init_machine = mx21ads_board_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index 88dccf122243..f26734298aa6 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -270,4 +270,5 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") .handle_irq = imx25_handle_irq, .timer = &mx25pdk_timer, .init_machine = mx25pdk_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index ba232d79fa81..18f35816706a 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -425,4 +425,5 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK") .handle_irq = imx27_handle_irq, .timer = &mx27pdk_timer, .init_machine = mx27pdk_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 74dd5731eb61..0228d2e07fe0 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -351,4 +351,5 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS") .handle_irq = imx27_handle_irq, .timer = &mx27ads_timer, .init_machine = mx27ads_board_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index b8c54b840185..89c33258639f 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -492,7 +492,7 @@ static struct mc13xxx_platform_data mc13783_pdata = { .regulators = mx31_3ds_regulators, .num_regulators = ARRAY_SIZE(mx31_3ds_regulators), }, - .flags = MC13XXX_USE_TOUCHSCREEN, + .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC, }; /* SPI */ @@ -770,4 +770,5 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") .timer = &mx31_3ds_timer, .init_machine = mx31_3ds_init, .reserve = mx31_3ds_reserve, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 9cc1a49053bb..4917aab0e253 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -542,4 +542,5 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS") .handle_irq = imx31_handle_irq, .timer = &mx31ads_timer, .init_machine = mx31ads_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 102ec99357cc..02401bbd6d53 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -303,4 +303,5 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131") .handle_irq = imx31_handle_irq, .timer = &mx31lilly_timer, .init_machine = mx31lilly_board_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index 5366d2de18fd..ef80751712e7 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -287,4 +287,5 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") .handle_irq = imx31_handle_irq, .timer = &mx31lite_timer, .init_machine = mx31lite_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 93269150309c..b95981dacb2b 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -600,4 +600,5 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") .handle_irq = imx31_handle_irq, .timer = &mx31moboard_timer, .init_machine = mx31moboard_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 7a462025a0f7..0af6c9c5b3fd 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -224,4 +224,5 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK") .handle_irq = imx35_handle_irq, .timer = &mx35pdk_timer, .init_machine = mx35_3ds_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index 125c19643b0f..8b3d3f07d894 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -274,4 +274,5 @@ MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") .handle_irq = imx27_handle_irq, .timer = &mxt_td60_timer, .init_machine = mxt_td60_board_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 26072f4b02e3..d3b9c6b5edde 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -442,4 +442,5 @@ MACHINE_START(PCA100, "phyCARD-i.MX27") .handle_irq = imx27_handle_irq, .init_machine = pca100_init, .timer = &pca100_timer, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index efd6b536ef6a..d7e151669ed3 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -696,4 +696,5 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037") .handle_irq = imx31_handle_irq, .timer = &pcm037_timer, .init_machine = pcm037_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index a17e9c7dfca0..16f126da9f8f 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -357,4 +357,5 @@ MACHINE_START(PCM038, "phyCORE-i.MX27") .handle_irq = imx27_handle_irq, .timer = &pcm038_timer, .init_machine = pcm038_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 7366c2ae3ea5..06dc106519ae 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -425,4 +425,5 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043") .handle_irq = imx35_handle_irq, .timer = &pcm043_timer, .init_machine = pcm043_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 4ff5faf102a8..260621055b6b 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -273,4 +273,5 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") .handle_irq = imx31_handle_irq, .timer = &qong_timer, .init_machine = qong_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index bb6e5b25d8d0..cb9ceae2f648 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -144,4 +144,5 @@ MACHINE_START(SCB9328, "Synertronixx scb9328") .handle_irq = imx1_handle_irq, .timer = &scb9328_timer, .init_machine = scb9328_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index 69092458f2d9..033257e553ef 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -322,4 +322,5 @@ MACHINE_START(VPR200, "VPR200") .handle_irq = imx35_handle_irq, .timer = &vpr200_timer, .init_machine = vpr200_board_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index f20f191d7cca..f7b0c2b1b905 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -64,7 +64,9 @@ void __init imx6q_pm_init(void) * address of the data structure used by l2x0 core to save registers, * and later restore the necessary ones in imx6q resume entry. */ +#ifdef CONFIG_CACHE_L2X0 phys_l2x0_saved_regs = __pa(&l2x0_saved_regs); +#endif suspend_set_ops(&imx6q_pm_ops); } diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index a8e33681b732..4bde04f99e38 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -19,6 +19,7 @@ #define SRC_SCR 0x000 #define SRC_GPR1 0x020 +#define BP_SRC_SCR_WARM_RESET_ENABLE 0 #define BP_SRC_SCR_CORE1_RST 14 #define BP_SRC_SCR_CORE1_ENABLE 22 @@ -46,11 +47,33 @@ void imx_set_cpu_jump(int cpu, void *jump_addr) src_base + SRC_GPR1 + cpu * 8); } +void imx_src_prepare_restart(void) +{ + u32 val; + + /* clear enable bits of secondary cores */ + val = readl_relaxed(src_base + SRC_SCR); + val &= ~(0x7 << BP_SRC_SCR_CORE1_ENABLE); + writel_relaxed(val, src_base + SRC_SCR); + + /* clear persistent entry register of primary core */ + writel_relaxed(0, src_base + SRC_GPR1); +} + void __init imx_src_init(void) { struct device_node *np; + u32 val; np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src"); src_base = of_iomap(np, 0); WARN_ON(!src_base); + + /* + * force warm reset sources to generate cold reset + * for a more reliable restart + */ + val = readl_relaxed(src_base + SRC_SCR); + val &= ~(1 << BP_SRC_SCR_WARM_RESET_ENABLE); + writel_relaxed(val, src_base + SRC_SCR); } diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index dfd18f3b50e8..350e26636a06 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -6,6 +6,8 @@ config ARCH_INTEGRATOR_AP bool "Support Integrator/AP and Integrator/PP2 platforms" select CLKSRC_MMIO select MIGHT_HAVE_PCI + select SERIAL_AMBA_PL010 + select SERIAL_AMBA_PL010_CONSOLE help Include support for the ARM(R) Integrator/AP and Integrator/PP2 platforms. @@ -15,6 +17,8 @@ config ARCH_INTEGRATOR_CP select ARCH_CINTEGRATOR select ARM_TIMER_SP804 select PLAT_VERSATILE_CLCD + select SERIAL_AMBA_PL011 + select SERIAL_AMBA_PL011_CONSOLE help Include support for the ARM(R) Integrator CP platform. diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h index a08f9b0299df..899561d8db28 100644 --- a/arch/arm/mach-integrator/common.h +++ b/arch/arm/mach-integrator/common.h @@ -1,2 +1,3 @@ void integrator_init_early(void); void integrator_reserve(void); +void integrator_restart(char, const char *); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 4b38e13667ac..019f0ab08f66 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -29,6 +29,7 @@ #include <mach/cm.h> #include <asm/system.h> #include <asm/leds.h> +#include <asm/mach-types.h> #include <asm/mach/time.h> #include <asm/pgtable.h> @@ -44,7 +45,6 @@ static struct amba_device rtc_device = { .flags = IORESOURCE_MEM, }, .irq = { IRQ_RTCINT, NO_IRQ }, - .periphid = 0x00041030, }; static struct amba_device uart0_device = { @@ -58,7 +58,6 @@ static struct amba_device uart0_device = { .flags = IORESOURCE_MEM, }, .irq = { IRQ_UARTINT0, NO_IRQ }, - .periphid = 0x0041010, }; static struct amba_device uart1_device = { @@ -72,7 +71,6 @@ static struct amba_device uart1_device = { .flags = IORESOURCE_MEM, }, .irq = { IRQ_UARTINT1, NO_IRQ }, - .periphid = 0x0041010, }; static struct amba_device kmi0_device = { @@ -85,7 +83,6 @@ static struct amba_device kmi0_device = { .flags = IORESOURCE_MEM, }, .irq = { IRQ_KMIINT0, NO_IRQ }, - .periphid = 0x00041050, }; static struct amba_device kmi1_device = { @@ -98,7 +95,6 @@ static struct amba_device kmi1_device = { .flags = IORESOURCE_MEM, }, .irq = { IRQ_KMIINT1, NO_IRQ }, - .periphid = 0x00041050, }; static struct amba_device *amba_devs[] __initdata = { @@ -157,6 +153,19 @@ static int __init integrator_init(void) { int i; + /* + * The Integrator/AP lacks necessary AMBA PrimeCell IDs, so we need to + * hard-code them. The Integator/CP and forward have proper cell IDs. + * Else we leave them undefined to the bus driver can autoprobe them. + */ + if (machine_is_integrator()) { + rtc_device.periphid = 0x00041030; + uart0_device.periphid = 0x00041010; + uart1_device.periphid = 0x00041010; + kmi0_device.periphid = 0x00041050; + kmi1_device.periphid = 0x00041050; + } + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; amba_device_register(d, &iomem_resource); @@ -238,3 +247,11 @@ void __init integrator_reserve(void) { memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET); } + +/* + * To reset, we hit the on-board reset register in the system FPGA + */ +void integrator_restart(char mode, const char *cmd) +{ + cm_control(CM_CTRL_RESET, CM_CTRL_RESET); +} diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h index e1551b8dab77..901514eba4a6 100644 --- a/arch/arm/mach-integrator/include/mach/system.h +++ b/arch/arm/mach-integrator/include/mach/system.h @@ -21,8 +21,6 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <mach/cm.h> - static inline void arch_idle(void) { /* @@ -32,13 +30,4 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ - /* - * To reset, we hit the on-board reset register - * in the system FPGA - */ - cm_control(CM_CTRL_RESET, CM_CTRL_RESET); -} - #endif diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h deleted file mode 100644 index 2f5a2bafb11f..000000000000 --- a/arch/arm/mach-integrator/include/mach/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/vmalloc.h - * - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END 0xd0000000UL diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index a1769f35a86e..21a1d6cbef40 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -472,4 +472,5 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator") .init_irq = ap_init_irq, .timer = &ap_timer, .init_machine = ap_init, + .restart = integrator_restart, MACHINE_END diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 5de49c33e4d4..a8b6aa6003f3 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -14,7 +14,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/string.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/amba/bus.h> #include <linux/amba/kmi.h> #include <linux/amba/clcd.h> @@ -499,4 +499,5 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") .init_irq = intcp_init_irq, .timer = &cp_timer, .init_machine = intcp_init, + .restart = integrator_restart, MACHINE_END diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index b4d8f8b8a085..3c82566acece 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -359,7 +359,7 @@ static struct resource pre_mem = { .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH, }; -static int __init pci_v3_setup_resources(struct resource **resource) +static int __init pci_v3_setup_resources(struct pci_sys_data *sys) { if (request_resource(&iomem_resource, &non_mem)) { printk(KERN_ERR "PCI: unable to allocate non-prefetchable " @@ -374,13 +374,13 @@ static int __init pci_v3_setup_resources(struct resource **resource) } /* - * bus->resource[0] is the IO resource for this bus - * bus->resource[1] is the mem resource for this bus - * bus->resource[2] is the prefetch mem resource for this bus + * the IO resource for this bus + * the mem resource for this bus + * the prefetch mem resource for this bus */ - resource[0] = &ioport_resource; - resource[1] = &non_mem; - resource[2] = &pre_mem; + pci_add_resource(&sys->resources, &ioport_resource); + pci_add_resource(&sys->resources, &non_mem); + pci_add_resource(&sys->resources, &pre_mem); return 1; } @@ -481,7 +481,7 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys) if (nr == 0) { sys->mem_offset = PHYS_PCI_MEM_BASE; - ret = pci_v3_setup_resources(sys->resource); + ret = pci_v3_setup_resources(sys); } return ret; @@ -489,7 +489,8 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys) struct pci_bus * __init pci_v3_scan_bus(int nr, struct pci_sys_data *sys) { - return pci_scan_bus(sys->busnr, &pci_v3_ops, sys); + return pci_scan_root_bus(NULL, sys->busnr, &pci_v3_ops, sys, + &sys->resources); } /* diff --git a/arch/arm/mach-iop13xx/include/mach/iop13xx.h b/arch/arm/mach-iop13xx/include/mach/iop13xx.h index 52b7fab7ef60..07e9ff7adafb 100644 --- a/arch/arm/mach-iop13xx/include/mach/iop13xx.h +++ b/arch/arm/mach-iop13xx/include/mach/iop13xx.h @@ -10,6 +10,7 @@ void iop13xx_map_io(void); void iop13xx_platform_init(void); void iop13xx_add_tpmi_devices(void); void iop13xx_init_irq(void); +void iop13xx_restart(char, const char *); /* CPUID CP6 R0 Page 0 */ static inline int iop13xx_cpu_id(void) diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h index d0c66ef450a7..1f31ed3f8ae2 100644 --- a/arch/arm/mach-iop13xx/include/mach/system.h +++ b/arch/arm/mach-iop13xx/include/mach/system.h @@ -7,21 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <mach/iop13xx.h> static inline void arch_idle(void) { cpu_do_idle(); } - -static inline void arch_reset(char mode, const char *cmd) -{ - /* - * Reset the internal bus (warning both cores are reset) - */ - write_wdtcr(IOP_WDTCR_EN_ARM); - write_wdtcr(IOP_WDTCR_EN); - write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET); - write_wdtcr(0x1000); - - for(;;); -} diff --git a/arch/arm/mach-iop13xx/include/mach/vmalloc.h b/arch/arm/mach-iop13xx/include/mach/vmalloc.h deleted file mode 100644 index c53456740345..000000000000 --- a/arch/arm/mach-iop13xx/include/mach/vmalloc.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _VMALLOC_H_ -#define _VMALLOC_H_ -#define VMALLOC_END 0xfa000000UL -#endif diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c index 4cf2cc477eae..abaee8833588 100644 --- a/arch/arm/mach-iop13xx/iq81340mc.c +++ b/arch/arm/mach-iop13xx/iq81340mc.c @@ -96,4 +96,5 @@ MACHINE_START(IQ81340MC, "Intel IQ81340MC") .init_irq = iop13xx_init_irq, .timer = &iq81340mc_timer, .init_machine = iq81340mc_init, + .restart = iop13xx_restart, MACHINE_END diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c index cd9e27499a1e..690916a09dc6 100644 --- a/arch/arm/mach-iop13xx/iq81340sc.c +++ b/arch/arm/mach-iop13xx/iq81340sc.c @@ -98,4 +98,5 @@ MACHINE_START(IQ81340SC, "Intel IQ81340SC") .init_irq = iop13xx_init_irq, .timer = &iq81340sc_timer, .init_machine = iq81340sc_init, + .restart = iop13xx_restart, MACHINE_END diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index db012fadf88c..b8f5a8736511 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -537,14 +537,14 @@ struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys) while(time_before(jiffies, atux_trhfa_timeout)) udelay(100); - bus = pci_bus_atux = pci_scan_bus(sys->busnr, - &iop13xx_atux_ops, - sys); + bus = pci_bus_atux = pci_scan_root_bus(NULL, sys->busnr, + &iop13xx_atux_ops, + sys, &sys->resources); break; case IOP13XX_INIT_ATU_ATUE: - bus = pci_bus_atue = pci_scan_bus(sys->busnr, - &iop13xx_atue_ops, - sys); + bus = pci_bus_atue = pci_scan_root_bus(NULL, sys->busnr, + &iop13xx_atue_ops, + sys, &sys->resources); break; } @@ -1084,9 +1084,8 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) request_resource(&ioport_resource, &res[0]); request_resource(&iomem_resource, &res[1]); - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; + pci_add_resource(&sys->resources, &res[0]); + pci_add_resource(&sys->resources, &res[1]); return 1; } diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index a5b989728b9e..daabb1fa6c2c 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -606,3 +606,14 @@ static int __init iop13xx_init_adma_setup(char *str) __setup("iop13xx_init_adma", iop13xx_init_adma_setup); __setup("iop13xx_init_uart", iop13xx_init_uart_setup); __setup("iop13xx_init_i2c", iop13xx_init_i2c_setup); + +void iop13xx_restart(char mode, const char *cmd) +{ + /* + * Reset the internal bus (warning both cores are reset) + */ + write_wdtcr(IOP_WDTCR_EN_ARM); + write_wdtcr(IOP_WDTCR_EN); + write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET); + write_wdtcr(0x1000); +} diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c index 4325055d4e19..24069e03fdc1 100644 --- a/arch/arm/mach-iop32x/em7210.c +++ b/arch/arm/mach-iop32x/em7210.c @@ -208,4 +208,5 @@ MACHINE_START(EM7210, "Lanner EM7210") .init_irq = iop32x_init_irq, .timer = &em7210_timer, .init_machine = em7210_init_machine, + .restart = iop3xx_restart, MACHINE_END diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index 0edc88020577..204e1d1cd766 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -212,4 +212,5 @@ MACHINE_START(GLANTANK, "GLAN Tank") .init_irq = iop32x_init_irq, .timer = &glantank_timer, .init_machine = glantank_init_machine, + .restart = iop3xx_restart, MACHINE_END diff --git a/arch/arm/mach-iop32x/include/mach/io.h b/arch/arm/mach-iop32x/include/mach/io.h index 059c783ce0b2..2d88264b9863 100644 --- a/arch/arm/mach-iop32x/include/mach/io.h +++ b/arch/arm/mach-iop32x/include/mach/io.h @@ -13,15 +13,8 @@ #include <asm/hardware/iop3xx.h> -extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size, - unsigned int mtype); -extern void __iop3xx_iounmap(void __iomem *addr); - #define IO_SPACE_LIMIT 0xffffffff #define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p)) #define __mem_pci(a) (a) -#define __arch_ioremap __iop3xx_ioremap -#define __arch_iounmap __iop3xx_iounmap - #endif diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h index a4b808fe0d81..4a88727bca98 100644 --- a/arch/arm/mach-iop32x/include/mach/system.h +++ b/arch/arm/mach-iop32x/include/mach/system.h @@ -7,28 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <asm/mach-types.h> -#include <asm/hardware/iop3xx.h> -#include <mach/n2100.h> - static inline void arch_idle(void) { cpu_do_idle(); } - -static inline void arch_reset(char mode, const char *cmd) -{ - local_irq_disable(); - - if (machine_is_n2100()) { - gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW); - gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT); - while (1) - ; - } - - *IOP3XX_PCSR = 0x30; - - /* Jump into ROM at address 0 */ - cpu_reset(0); -} diff --git a/arch/arm/mach-iop32x/include/mach/vmalloc.h b/arch/arm/mach-iop32x/include/mach/vmalloc.h deleted file mode 100644 index c4862d48e583..000000000000 --- a/arch/arm/mach-iop32x/include/mach/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-iop32x/include/mach/vmalloc.h - */ - -#define VMALLOC_END 0xfe000000UL diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c index 9e7aaccfeba0..3eb642af1cdc 100644 --- a/arch/arm/mach-iop32x/iq31244.c +++ b/arch/arm/mach-iop32x/iq31244.c @@ -318,6 +318,7 @@ MACHINE_START(IQ31244, "Intel IQ31244") .init_irq = iop32x_init_irq, .timer = &iq31244_timer, .init_machine = iq31244_init_machine, + .restart = iop3xx_restart, MACHINE_END /* There should have been an ep80219 machine identifier from the beginning. @@ -332,4 +333,5 @@ MACHINE_START(EP80219, "Intel EP80219") .init_irq = iop32x_init_irq, .timer = &iq31244_timer, .init_machine = iq31244_init_machine, + .restart = iop3xx_restart, MACHINE_END diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c index 53ea86f649dd..2ec724b58a2c 100644 --- a/arch/arm/mach-iop32x/iq80321.c +++ b/arch/arm/mach-iop32x/iq80321.c @@ -191,4 +191,5 @@ MACHINE_START(IQ80321, "Intel IQ80321") .init_irq = iop32x_init_irq, .timer = &iq80321_timer, .init_machine = iq80321_init_machine, + .restart = iop3xx_restart, MACHINE_END diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index d7269279968c..6b6d55912444 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -291,6 +291,14 @@ static void n2100_power_off(void) ; } +static void n2100_restart(char mode, const char *cmd) +{ + gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW); + gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT); + while (1) + ; +} + static struct timer_list power_button_poll_timer; @@ -332,4 +340,5 @@ MACHINE_START(N2100, "Thecus N2100") .init_irq = iop32x_init_irq, .timer = &n2100_timer, .init_machine = n2100_init_machine, + .restart = n2100_restart, MACHINE_END diff --git a/arch/arm/mach-iop33x/include/mach/io.h b/arch/arm/mach-iop33x/include/mach/io.h index 39e893e97c21..a8a66fc8fbdb 100644 --- a/arch/arm/mach-iop33x/include/mach/io.h +++ b/arch/arm/mach-iop33x/include/mach/io.h @@ -13,15 +13,8 @@ #include <asm/hardware/iop3xx.h> -extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size, - unsigned int mtype); -extern void __iop3xx_iounmap(void __iomem *addr); - #define IO_SPACE_LIMIT 0xffffffff #define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p)) #define __mem_pci(a) (a) -#define __arch_ioremap __iop3xx_ioremap -#define __arch_iounmap __iop3xx_iounmap - #endif diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h index f192a34be073..4f98e765397c 100644 --- a/arch/arm/mach-iop33x/include/mach/system.h +++ b/arch/arm/mach-iop33x/include/mach/system.h @@ -7,17 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <asm/hardware/iop3xx.h> - static inline void arch_idle(void) { cpu_do_idle(); } - -static inline void arch_reset(char mode, const char *cmd) -{ - *IOP3XX_PCSR = 0x30; - - /* Jump into ROM at address 0 */ - cpu_reset(0); -} diff --git a/arch/arm/mach-iop33x/include/mach/vmalloc.h b/arch/arm/mach-iop33x/include/mach/vmalloc.h deleted file mode 100644 index 48331dc23704..000000000000 --- a/arch/arm/mach-iop33x/include/mach/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-iop33x/include/mach/vmalloc.h - */ - -#define VMALLOC_END 0xfe000000UL diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c index 9e14ccc56f8e..abce934f3816 100644 --- a/arch/arm/mach-iop33x/iq80331.c +++ b/arch/arm/mach-iop33x/iq80331.c @@ -146,4 +146,5 @@ MACHINE_START(IQ80331, "Intel IQ80331") .init_irq = iop33x_init_irq, .timer = &iq80331_timer, .init_machine = iq80331_init_machine, + .restart = iop3xx_restart, MACHINE_END diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c index 09c899a2523f..7513559e25bb 100644 --- a/arch/arm/mach-iop33x/iq80332.c +++ b/arch/arm/mach-iop33x/iq80332.c @@ -146,4 +146,5 @@ MACHINE_START(IQ80332, "Intel IQ80332") .init_irq = iop33x_init_irq, .timer = &iq80332_timer, .init_machine = iq80332_init_machine, + .restart = iop3xx_restart, MACHINE_END diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 24f0fe35f4ad..81c45370a4e6 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -515,3 +515,7 @@ void __init ixp2000_init_irq(void) } } +void ixp2000_restart(char mode, const char *cmd) +{ + ixp2000_reg_wrb(IXP2000_RESET0, RSTALL); +} diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index af9994537e01..e872d238cd0f 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -145,7 +145,8 @@ static struct pci_ops enp2611_pci_ops = { static struct pci_bus * __init enp2611_pci_scan_bus(int nr, struct pci_sys_data *sys) { - return pci_scan_bus(sys->busnr, &enp2611_pci_ops, sys); + return pci_scan_root_bus(NULL, sys->busnr, &enp2611_pci_ops, sys, + &sys->resources); } static int __init enp2611_pci_map_irq(const struct pci_dev *dev, u8 slot, @@ -259,6 +260,7 @@ MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board") .init_irq = ixp2000_init_irq, .timer = &enp2611_timer, .init_machine = enp2611_init_machine, + .restart = ixp2000_restart, MACHINE_END diff --git a/arch/arm/mach-ixp2000/include/mach/platform.h b/arch/arm/mach-ixp2000/include/mach/platform.h index 42182c79ed90..bb0f8dcf9ee1 100644 --- a/arch/arm/mach-ixp2000/include/mach/platform.h +++ b/arch/arm/mach-ixp2000/include/mach/platform.h @@ -122,6 +122,7 @@ void ixp2000_map_io(void); void ixp2000_uart_init(void); void ixp2000_init_irq(void); void ixp2000_init_time(unsigned long); +void ixp2000_restart(char, const char *); unsigned long ixp2000_gettimeoffset(void); struct pci_sys_data; diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h index de370992c848..a7fb08b2b8e7 100644 --- a/arch/arm/mach-ixp2000/include/mach/system.h +++ b/arch/arm/mach-ixp2000/include/mach/system.h @@ -8,42 +8,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - -#include <mach/hardware.h> -#include <asm/mach-types.h> - static inline void arch_idle(void) { cpu_do_idle(); } - -static inline void arch_reset(char mode, const char *cmd) -{ - local_irq_disable(); - - /* - * Reset flash banking register so that we are pointing at - * RedBoot bank. - */ - if (machine_is_ixdp2401()) { - ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG, - ((0 >> IXDP2X01_FLASH_WINDOW_BITS) - | IXDP2X01_CPLD_FLASH_INTERN)); - ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff); - } - - /* - * On IXDP2801 we need to write this magic sequence to the CPLD - * to cause a complete reset of the CPU and all external devices - * and move the flash bank register back to 0. - */ - if (machine_is_ixdp2801() || machine_is_ixdp28x5()) { - unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG; - - reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF); - ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg); - ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000); - } - - ixp2000_reg_wrb(IXP2000_RESET0, RSTALL); -} diff --git a/arch/arm/mach-ixp2000/include/mach/vmalloc.h b/arch/arm/mach-ixp2000/include/mach/vmalloc.h deleted file mode 100644 index 61c8dae24f95..000000000000 --- a/arch/arm/mach-ixp2000/include/mach/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/vmalloc.h - * - * Author: Naeem Afzal <naeem.m.afzal@intel.com> - * - * Copyright 2002 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 8MB value just means that there will be a 8MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - */ -#define VMALLOC_END 0xfb000000UL diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index f7dfd9700141..f53e911ec94a 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -176,5 +176,6 @@ MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform") .init_irq = ixdp2400_init_irq, .timer = &ixdp2400_timer, .init_machine = ixdp2x00_init_machine, + .restart = ixp2000_restart, MACHINE_END diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index d33bcac1ec92..a2e7c393e74f 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -291,5 +291,6 @@ MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform") .init_irq = ixdp2800_init_irq, .timer = &ixdp2800_timer, .init_machine = ixdp2x00_init_machine, + .restart = ixp2000_restart, MACHINE_END diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 61a28676b5be..7632beadabf6 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -413,6 +413,35 @@ static void __init ixdp2x01_init_machine(void) ixdp2x01_uart_init(); } +static void ixdp2401_restart(char mode, const char *cmd) +{ + /* + * Reset flash banking register so that we are pointing at + * RedBoot bank. + */ + ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG, + ((0 >> IXDP2X01_FLASH_WINDOW_BITS) + | IXDP2X01_CPLD_FLASH_INTERN)); + ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff); + + ixp2000_restart(mode, cmd); +} + +static void ixdp280x_restart(char mode, const char *cmd) +{ + /* + * On IXDP2801 we need to write this magic sequence to the CPLD + * to cause a complete reset of the CPU and all external devices + * and move the flash bank register back to 0. + */ + unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG; + + reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF); + ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg); + ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000); + + ixp2000_restart(mode, cmd); +} #ifdef CONFIG_ARCH_IXDP2401 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform") @@ -422,6 +451,7 @@ MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform") .init_irq = ixdp2x01_init_irq, .timer = &ixdp2x01_timer, .init_machine = ixdp2x01_init_machine, + .restart = ixdp2401_restart, MACHINE_END #endif @@ -433,6 +463,7 @@ MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform") .init_irq = ixdp2x01_init_irq, .timer = &ixdp2x01_timer, .init_machine = ixdp2x01_init_machine, + .restart = ixdp280x_restart, MACHINE_END /* @@ -446,6 +477,7 @@ MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform") .init_irq = ixdp2x01_init_irq, .timer = &ixdp2x01_timer, .init_machine = ixdp2x01_init_machine, + .restart = ixdp280x_restart, MACHINE_END #endif diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index f5098b306fd3..626fda435aa9 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -132,7 +132,8 @@ static struct pci_ops ixp2000_pci_ops = { struct pci_bus *ixp2000_pci_scan_bus(int nr, struct pci_sys_data *sysdata) { - return pci_scan_bus(sysdata->busnr, &ixp2000_pci_ops, sysdata); + return pci_scan_root_bus(NULL, sysdata->busnr, &ixp2000_pci_ops, + sysdata, &sysdata->resources); } @@ -242,9 +243,8 @@ int ixp2000_pci_setup(int nr, struct pci_sys_data *sys) if (nr >= 1) return 0; - sys->resource[0] = &ixp2000_pci_io_space; - sys->resource[1] = &ixp2000_pci_mem_space; - sys->resource[2] = NULL; + pci_add_resource(&sys->resources, &ixp2000_pci_io_space); + pci_add_resource(&sys->resources, &ixp2000_pci_mem_space); return 1; } diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index a1bee33d183e..0923bb905cc0 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -444,3 +444,9 @@ void __init ixp23xx_sys_init(void) *IXP23XX_EXP_UNIT_FUSE |= 0xf; platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices)); } + +void ixp23xx_restart(char mode, const char *cmd) +{ + /* Use on-chip reset capability */ + *IXP23XX_RESET0 |= IXP23XX_RST_ALL; +} diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c index 30dd31652e9d..8f2487e1fc4e 100644 --- a/arch/arm/mach-ixp23xx/espresso.c +++ b/arch/arm/mach-ixp23xx/espresso.c @@ -90,4 +90,5 @@ MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso") .timer = &ixp23xx_timer, .atag_offset = 0x100, .init_machine = espresso_init, + .restart = ixp23xx_restart, MACHINE_END diff --git a/arch/arm/mach-ixp23xx/include/mach/io.h b/arch/arm/mach-ixp23xx/include/mach/io.h index a1749d0fd896..4ce4353b9f72 100644 --- a/arch/arm/mach-ixp23xx/include/mach/io.h +++ b/arch/arm/mach-ixp23xx/include/mach/io.h @@ -20,33 +20,4 @@ #define __io(p) ((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT)) #define __mem_pci(a) (a) -static inline void __iomem * -ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype) -{ - if (addr >= IXP23XX_PCI_MEM_START && - addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) { - if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) - return NULL; - - return (void __iomem *) - ((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT); - } - - return __arm_ioremap(addr, size, mtype); -} - -static inline void -ixp23xx_iounmap(void __iomem *addr) -{ - if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) && - (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE)) - return; - - __iounmap(addr); -} - -#define __arch_ioremap ixp23xx_ioremap -#define __arch_iounmap ixp23xx_iounmap - - #endif diff --git a/arch/arm/mach-ixp23xx/include/mach/platform.h b/arch/arm/mach-ixp23xx/include/mach/platform.h index db9d9416e5e4..50de558e722e 100644 --- a/arch/arm/mach-ixp23xx/include/mach/platform.h +++ b/arch/arm/mach-ixp23xx/include/mach/platform.h @@ -34,6 +34,7 @@ struct pci_sys_data; void ixp23xx_map_io(void); void ixp23xx_init_irq(void); void ixp23xx_sys_init(void); +void ixp23xx_restart(char, const char *); int ixp23xx_pci_setup(int, struct pci_sys_data *); void ixp23xx_pci_preinit(void); struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*); diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h index 8920ff2dff1f..277dda7334b9 100644 --- a/arch/arm/mach-ixp23xx/include/mach/system.h +++ b/arch/arm/mach-ixp23xx/include/mach/system.h @@ -7,10 +7,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - -#include <mach/hardware.h> -#include <asm/mach-types.h> - static inline void arch_idle(void) { #if 0 @@ -18,16 +14,3 @@ static inline void arch_idle(void) cpu_do_idle(); #endif } - -static inline void arch_reset(char mode, const char *cmd) -{ - /* First try machine specific support */ - if (machine_is_ixdp2351()) { - *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC; - (void) *IXDP2351_CPLD_RESET1_REG; - *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE; - } - - /* Use on-chip reset capability */ - *IXP23XX_RESET0 |= IXP23XX_RST_ALL; -} diff --git a/arch/arm/mach-ixp23xx/include/mach/vmalloc.h b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h deleted file mode 100644 index 896c56a1c00e..000000000000 --- a/arch/arm/mach-ixp23xx/include/mach/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/vmalloc.h - * - * Copyright (c) 2005 MontaVista Software, Inc. - * - * NPU mappings end at 0xf0000000 and we allocate 64MB for board - * specific static I/O. - */ - -#define VMALLOC_END (0xec000000UL) diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c index b3a57e0f3419..5d5dd3e8d069 100644 --- a/arch/arm/mach-ixp23xx/ixdp2351.c +++ b/arch/arm/mach-ixp23xx/ixdp2351.c @@ -326,6 +326,17 @@ static void __init ixdp2351_init(void) ixp23xx_sys_init(); } +static void ixdp2351_restart(char mode, const char *cmd) +{ + /* First try machine specific support */ + + *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC; + (void) *IXDP2351_CPLD_RESET1_REG; + *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE; + + ixp23xx_restart(mode, cmd); +} + MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform") /* Maintainer: MontaVista Software, Inc. */ .map_io = ixdp2351_map_io, @@ -333,4 +344,5 @@ MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform") .timer = &ixp23xx_timer, .atag_offset = 0x100, .init_machine = ixdp2351_init, + .restart = ixdp2351_restart, MACHINE_END diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c index e6be5711c700..25b5c462cea2 100644 --- a/arch/arm/mach-ixp23xx/pci.c +++ b/arch/arm/mach-ixp23xx/pci.c @@ -143,7 +143,8 @@ struct pci_ops ixp23xx_pci_ops = { struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata) { - return pci_scan_bus(sysdata->busnr, &ixp23xx_pci_ops, sysdata); + return pci_scan_root_bus(NULL, sysdata->busnr, &ixp23xx_pci_ops, + sysdata, &sysdata->resources); } int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs) @@ -280,9 +281,8 @@ int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys) if (nr >= 1) return 0; - sys->resource[0] = &ixp23xx_pci_io_space; - sys->resource[1] = &ixp23xx_pci_mem_space; - sys->resource[2] = NULL; + pci_add_resource(&sys->resources, &ixp23xx_pci_io_space); + pci_add_resource(&sys->resources, &ixp23xx_pci_mem_space); return 1; } diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c index 8f4dcbba9025..377283fc658c 100644 --- a/arch/arm/mach-ixp23xx/roadrunner.c +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -177,4 +177,5 @@ MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform") .timer = &ixp23xx_timer, .atag_offset = 0x100, .init_machine = roadrunner_init, + .restart = ixp23xx_restart, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index 37609a22c450..a7277ad470a5 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -172,6 +172,7 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform") #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, #endif + .restart = ixp4xx_restart, MACHINE_END /* @@ -190,6 +191,7 @@ MACHINE_START(LOFT, "Giant Shoulder Inc Loft board") #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, #endif + .restart = ixp4xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 8325058ef871..5eff15f24bc2 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -472,9 +472,8 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys) request_resource(&ioport_resource, &res[0]); request_resource(&iomem_resource, &res[1]); - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; + pci_add_resource(&sys->resources, &res[0]); + pci_add_resource(&sys->resources, &res[1]); platform_notify = ixp4xx_pci_platform_notify; platform_notify_remove = ixp4xx_pci_platform_notify_remove; @@ -484,7 +483,8 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys) struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys) { - return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys); + return pci_scan_root_bus(NULL, sys->busnr, &ixp4xx_ops, sys, + &sys->resources); } int dma_set_coherent_mask(struct device *dev, u64 mask) diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index b86a0055ab96..3841ab4146ba 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -17,7 +17,6 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/serial.h> -#include <linux/sched.h> #include <linux/tty.h> #include <linux/platform_device.h> #include <linux/serial_core.h> @@ -403,18 +402,9 @@ void __init ixp4xx_sys_init(void) /* * sched_clock() */ -static DEFINE_CLOCK_DATA(cd); - -unsigned long long notrace sched_clock(void) -{ - u32 cyc = *IXP4XX_OSTS; - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -static void notrace ixp4xx_update_sched_clock(void) +static u32 notrace ixp4xx_read_sched_clock(void) { - u32 cyc = *IXP4XX_OSTS; - update_sched_clock(&cd, cyc, (u32)~0); + return *IXP4XX_OSTS; } /* @@ -430,7 +420,7 @@ unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; EXPORT_SYMBOL(ixp4xx_timer_freq); static void __init ixp4xx_clocksource_init(void) { - init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq); + setup_sched_clock(ixp4xx_read_sched_clock, 32, ixp4xx_timer_freq); clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32, ixp4xx_clocksource_read); @@ -501,3 +491,23 @@ static void __init ixp4xx_clockevent_init(void) clockevents_register_device(&clockevent_ixp4xx); } + +void ixp4xx_restart(char mode, const char *cmd) +{ + if ( 1 && mode == 's') { + /* Jump into ROM at address 0 */ + soft_restart(0); + } else { + /* Use on-chip reset capability */ + + /* set the "key" register to enable access to + * "timer" and "enable" registers + */ + *IXP4XX_OSWK = IXP4XX_WDT_KEY; + + /* write 0 to the timer register for an immediate reset */ + *IXP4XX_OSWT = 0; + + *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE; + } +} diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index 81dfec31842b..a74f86ce8bcc 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -117,6 +117,7 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote") #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, #endif + .restart = ixp4xx_restart, MACHINE_END #endif @@ -132,6 +133,7 @@ MACHINE_START(IXDPG425, "Intel IXDPG425") .timer = &ixp4xx_timer, .atag_offset = 0x100, .init_machine = coyote_init, + .restart = ixp4xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 8837fbca27ce..67be177b336a 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -286,4 +286,5 @@ MACHINE_START(DSMG600, "D-Link DSM-G600 RevA") #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, #endif + .restart = ixp4xx_restart, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index 2887c3578c17..6d5818285af8 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -277,5 +277,6 @@ MACHINE_START(FSG, "Freecom FSG-3") #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, #endif + .restart = ixp4xx_restart, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c index d69d1b053bb7..7ecf9b28f1c0 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-setup.c +++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c @@ -104,5 +104,6 @@ MACHINE_START(GATEWAY7001, "Gateway 7001 AP") #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, #endif + .restart = ixp4xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index bf6678d1a929..c0e3d69a8aec 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -504,4 +504,5 @@ MACHINE_START(GORAMO_MLR, "MultiLink") #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, #endif + .restart = ixp4xx_restart, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index aa029fc19140..a23f89391458 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -172,6 +172,7 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)") #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, #endif + .restart = ixp4xx_restart, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h index e824c02c825a..df9250bbf13d 100644 --- a/arch/arm/mach-ixp4xx/include/mach/platform.h +++ b/arch/arm/mach-ixp4xx/include/mach/platform.h @@ -125,6 +125,7 @@ extern void ixp4xx_init_irq(void); extern void ixp4xx_sys_init(void); extern void ixp4xx_timer_init(void); extern struct sys_timer ixp4xx_timer; +extern void ixp4xx_restart(char, const char *); extern void ixp4xx_pci_preinit(void); struct pci_sys_data; extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h index 54c0af7fa2d4..140a9bef4466 100644 --- a/arch/arm/mach-ixp4xx/include/mach/system.h +++ b/arch/arm/mach-ixp4xx/include/mach/system.h @@ -8,9 +8,6 @@ * published by the Free Software Foundation. * */ - -#include <mach/hardware.h> - static inline void arch_idle(void) { /* ixp4xx does not implement the XScale PWRMODE register, @@ -20,25 +17,3 @@ static inline void arch_idle(void) cpu_do_idle(); #endif } - - -static inline void arch_reset(char mode, const char *cmd) -{ - if ( 1 && mode == 's') { - /* Jump into ROM at address 0 */ - cpu_reset(0); - } else { - /* Use on-chip reset capability */ - - /* set the "key" register to enable access to - * "timer" and "enable" registers - */ - *IXP4XX_OSWK = IXP4XX_WDT_KEY; - - /* write 0 to the timer register for an immediate reset */ - *IXP4XX_OSWT = 0; - - *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE; - } -} - diff --git a/arch/arm/mach-ixp4xx/include/mach/vmalloc.h b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h deleted file mode 100644 index 9bcd64d59854..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/vmalloc.h - */ -#define VMALLOC_END (0xff000000UL) - diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index f235f829dfa6..8a38b39999f8 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -261,6 +261,7 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, #endif + .restart = ixp4xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index de716fa1aab6..1010eb7b0083 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -321,4 +321,5 @@ MACHINE_START(NAS100D, "Iomega NAS 100d") #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, #endif + .restart = ixp4xx_restart, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index ac81ccb26bfe..aa355c360d57 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -307,4 +307,5 @@ MACHINE_START(NSLU2, "Linksys NSLU2") #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, #endif + .restart = ixp4xx_restart, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c index 3b6a81a696fc..0940869fcfdd 100644 --- a/arch/arm/mach-ixp4xx/omixp-setup.c +++ b/arch/arm/mach-ixp4xx/omixp-setup.c @@ -246,6 +246,7 @@ MACHINE_START(DEVIXP, "Omicron DEVIXP") .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .init_machine = omixp_init, + .restart = ixp4xx_restart, MACHINE_END #endif @@ -259,6 +260,7 @@ MACHINE_START(MICCPT, "Omicron MICCPT") #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, #endif + .restart = ixp4xx_restart, MACHINE_END #endif @@ -269,5 +271,6 @@ MACHINE_START(MIC256, "Omicron MIC256") .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .init_machine = omixp_init, + .restart = ixp4xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c index 27e469ef4523..9dec20683291 100644 --- a/arch/arm/mach-ixp4xx/vulcan-setup.c +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -244,4 +244,5 @@ MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan") #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, #endif + .restart = ixp4xx_restart, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c index b14144b967a7..5ac0f0a0fd8c 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-setup.c +++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c @@ -105,5 +105,6 @@ MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2") #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, #endif + .restart = ixp4xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c index 8d03bcef5182..e9a7180863d9 100644 --- a/arch/arm/mach-kirkwood/addr-map.c +++ b/arch/arm/mach-kirkwood/addr-map.c @@ -13,12 +13,12 @@ #include <linux/mbus.h> #include <linux/io.h> #include <mach/hardware.h> +#include <plat/addr-map.h> #include "common.h" /* * Generic Address Decode Windows bit settings */ -#define TARGET_DDR 0 #define TARGET_DEV_BUS 1 #define TARGET_SRAM 3 #define TARGET_PCIE 4 @@ -36,118 +36,55 @@ #define ATTR_SRAM 0x01 /* - * Helpers to get DDR bank info + * Description of the windows needed by the platform code */ -#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) -#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) - -/* - * CPU Address Decode Windows registers - */ -#define WIN_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) -#define WIN_CTRL_OFF 0x0000 -#define WIN_BASE_OFF 0x0004 -#define WIN_REMAP_LO_OFF 0x0008 -#define WIN_REMAP_HI_OFF 0x000c - - -struct mbus_dram_target_info kirkwood_mbus_dram_info; - -static int __init cpu_win_can_remap(int win) -{ - if (win < 4) - return 1; - - return 0; -} - -static void __init setup_cpu_win(int win, u32 base, u32 size, - u8 target, u8 attr, int remap) -{ - void __iomem *addr = (void __iomem *)WIN_OFF(win); - u32 ctrl; - - base &= 0xffff0000; - ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1; - - writel(base, addr + WIN_BASE_OFF); - writel(ctrl, addr + WIN_CTRL_OFF); - if (cpu_win_can_remap(win)) { - if (remap < 0) - remap = base; - - writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF); - writel(0, addr + WIN_REMAP_HI_OFF); - } -} - -void __init kirkwood_setup_cpu_mbus(void) -{ - void __iomem *addr; - int i; - int cs; +static struct __initdata orion_addr_map_cfg addr_map_cfg = { + .num_wins = 8, + .remappable_wins = 4, + .bridge_virt_base = BRIDGE_VIRT_BASE, +}; +static const struct __initdata orion_addr_map_info addr_map_info[] = { /* - * First, disable and clear windows. + * Windows for PCIe IO+MEM space. */ - for (i = 0; i < 8; i++) { - addr = (void __iomem *)WIN_OFF(i); - - writel(0, addr + WIN_BASE_OFF); - writel(0, addr + WIN_CTRL_OFF); - if (cpu_win_can_remap(i)) { - writel(0, addr + WIN_REMAP_LO_OFF); - writel(0, addr + WIN_REMAP_HI_OFF); - } - } - + { 0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE, + TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE + }, + { 1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE, + TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE + }, + { 2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE, + TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE + }, + { 3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE, + TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE + }, /* - * Setup windows for PCIe IO+MEM space. + * Window for NAND controller. */ - setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE, - TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE); - setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE, - TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE); - setup_cpu_win(2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE, - TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE); - setup_cpu_win(3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE, - TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE); - + { 4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE, + TARGET_DEV_BUS, ATTR_DEV_NAND, -1 + }, /* - * Setup window for NAND controller. + * Window for SRAM. */ - setup_cpu_win(4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE, - TARGET_DEV_BUS, ATTR_DEV_NAND, -1); + { 5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE, + TARGET_SRAM, ATTR_SRAM, -1 + }, + /* End marker */ + { -1, 0, 0, 0, 0, 0 } +}; +void __init kirkwood_setup_cpu_mbus(void) +{ /* - * Setup window for SRAM. + * Disable, clear and configure windows. */ - setup_cpu_win(5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE, - TARGET_SRAM, ATTR_SRAM, -1); + orion_config_wins(&addr_map_cfg, addr_map_info); /* * Setup MBUS dram target info. */ - kirkwood_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; - - addr = (void __iomem *)DDR_WINDOW_CPU_BASE; - - for (i = 0, cs = 0; i < 4; i++) { - u32 base = readl(addr + DDR_BASE_CS_OFF(i)); - u32 size = readl(addr + DDR_SIZE_CS_OFF(i)); - - /* - * Chip select enabled? - */ - if (size & 1) { - struct mbus_dram_window *w; - - w = &kirkwood_mbus_dram_info.cs[cs++]; - w->cs_index = i; - w->mbus_attr = 0xf & ~(1 << i); - w->base = base & 0xffff0000; - w->size = (size | 0x0000ffff) + 1; - } - } - kirkwood_mbus_dram_info.num_cs = cs; + orion_setup_cpu_mbus_target(&addr_map_cfg, DDR_WINDOW_CPU_BASE); } diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index f3248cfbe51d..cc15426787b1 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/serial_8250.h> -#include <linux/mbus.h> #include <linux/ata_platform.h> #include <linux/mtd/nand.h> #include <linux/dma-mapping.h> @@ -30,6 +29,7 @@ #include <plat/orion_nand.h> #include <plat/common.h> #include <plat/time.h> +#include <plat/addr-map.h> #include "common.h" /***************************************************************************** @@ -73,8 +73,7 @@ unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED; void __init kirkwood_ehci_init(void) { kirkwood_clk_ctrl |= CGC_USB0; - orion_ehci_init(&kirkwood_mbus_dram_info, - USB_PHYS_BASE, IRQ_KIRKWOOD_USB); + orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB); } @@ -85,7 +84,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { kirkwood_clk_ctrl |= CGC_GE0; - orion_ge00_init(eth_data, &kirkwood_mbus_dram_info, + orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, IRQ_KIRKWOOD_GE00_ERR, kirkwood_tclk); } @@ -99,7 +98,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) kirkwood_clk_ctrl |= CGC_GE1; - orion_ge01_init(eth_data, &kirkwood_mbus_dram_info, + orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, IRQ_KIRKWOOD_GE01_ERR, kirkwood_tclk); } @@ -178,8 +177,7 @@ void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data) if (sata_data->n_ports > 1) kirkwood_clk_ctrl |= CGC_SATA1; - orion_sata_init(sata_data, &kirkwood_mbus_dram_info, - SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA); + orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA); } @@ -221,7 +219,6 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data) mvsdio_data->clock = 100000000; else mvsdio_data->clock = 200000000; - mvsdio_data->dram = &kirkwood_mbus_dram_info; kirkwood_clk_ctrl |= CGC_SDIO; kirkwood_sdio.dev.platform_data = mvsdio_data; platform_device_register(&kirkwood_sdio); @@ -285,8 +282,7 @@ static void __init kirkwood_xor0_init(void) { kirkwood_clk_ctrl |= CGC_XOR0; - orion_xor0_init(&kirkwood_mbus_dram_info, - XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE, + orion_xor0_init(XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE, IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01); } @@ -364,7 +360,6 @@ static struct resource kirkwood_i2s_resources[] = { }; static struct kirkwood_asoc_platform_data kirkwood_i2s_data = { - .dram = &kirkwood_mbus_dram_info, .burst = 128, }; @@ -430,6 +425,8 @@ static char * __init kirkwood_id(void) } else if (dev == MV88F6282_DEV_ID) { if (rev == MV88F6282_REV_A0) return "MV88F6282-Rev-A0"; + else if (rev == MV88F6282_REV_A1) + return "MV88F6282-Rev-A1"; else return "MV88F6282-Rev-Unsupported"; } else { @@ -534,3 +531,19 @@ static int __init kirkwood_clock_gate(void) return 0; } late_initcall(kirkwood_clock_gate); + +void kirkwood_restart(char mode, const char *cmd) +{ + /* + * Enable soft reset to assert RSTOUTn. + */ + writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); + + /* + * Assert soft reset. + */ + writel(SOFT_RESET, SYSTEM_SOFT_RESET); + + while (1) + ; +} diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index b9b0f0968a36..9071a397136d 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -30,7 +30,6 @@ void kirkwood_init(void); void kirkwood_init_early(void); void kirkwood_init_irq(void); -extern struct mbus_dram_target_info kirkwood_mbus_dram_info; void kirkwood_setup_cpu_mbus(void); void kirkwood_enable_pcie(void); @@ -50,6 +49,7 @@ void kirkwood_uart1_init(void); void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay); void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *)); void kirkwood_audio_init(void); +void kirkwood_restart(char, const char *); extern int kirkwood_tclk; extern struct sys_timer kirkwood_timer; diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c index f457e07a65f0..6e1bac929ab5 100644 --- a/arch/arm/mach-kirkwood/d2net_v2-setup.c +++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c @@ -227,4 +227,5 @@ MACHINE_START(D2NET_V2, "LaCie d2 Network v2") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index ff4c21c1f923..d93359379598 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -103,4 +103,5 @@ MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c index e4d199b2b1e8..61d9a552a054 100644 --- a/arch/arm/mach-kirkwood/dockstar-setup.c +++ b/arch/arm/mach-kirkwood/dockstar-setup.c @@ -108,4 +108,5 @@ MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c index 6c40f784b516..bdaed3867d13 100644 --- a/arch/arm/mach-kirkwood/guruplug-setup.c +++ b/arch/arm/mach-kirkwood/guruplug-setup.c @@ -127,4 +127,5 @@ MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h index 1aaddc364f2e..49dd0cb5e166 100644 --- a/arch/arm/mach-kirkwood/include/mach/io.h +++ b/arch/arm/mach-kirkwood/include/mach/io.h @@ -19,31 +19,6 @@ static inline void __iomem *__io(unsigned long addr) + KIRKWOOD_PCIE_IO_VIRT_BASE); } -static inline void __iomem * -__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype) -{ - void __iomem *retval; - unsigned long offs = paddr - KIRKWOOD_REGS_PHYS_BASE; - if (mtype == MT_DEVICE && size && offs < KIRKWOOD_REGS_SIZE && - size <= KIRKWOOD_REGS_SIZE && offs + size <= KIRKWOOD_REGS_SIZE) { - retval = (void __iomem *)KIRKWOOD_REGS_VIRT_BASE + offs; - } else { - retval = __arm_ioremap(paddr, size, mtype); - } - - return retval; -} - -static inline void -__arch_iounmap(void __iomem *addr) -{ - if (addr < (void __iomem *)KIRKWOOD_REGS_VIRT_BASE || - addr >= (void __iomem *)(KIRKWOOD_REGS_VIRT_BASE + KIRKWOOD_REGS_SIZE)) - __iounmap(addr); -} - -#define __arch_ioremap __arch_ioremap -#define __arch_iounmap __arch_iounmap #define __io(a) __io(a) #define __mem_pci(a) (a) diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index 010bdeb4ac5f..fede3d503efa 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -135,4 +135,5 @@ #define MV88F6282_DEV_ID 0x6282 #define MV88F6282_REV_A0 0 +#define MV88F6282_REV_A1 1 #endif diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h index 7568e95d279b..5fddde002b5e 100644 --- a/arch/arm/mach-kirkwood/include/mach/system.h +++ b/arch/arm/mach-kirkwood/include/mach/system.h @@ -9,28 +9,9 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <mach/bridge-regs.h> - static inline void arch_idle(void) { cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ - /* - * Enable soft reset to assert RSTOUTn. - */ - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); - - /* - * Assert soft reset. - */ - writel(SOFT_RESET, SYSTEM_SOFT_RESET); - - while (1) - ; -} - - #endif diff --git a/arch/arm/mach-kirkwood/include/mach/vmalloc.h b/arch/arm/mach-kirkwood/include/mach/vmalloc.h deleted file mode 100644 index bf162ca3d2c1..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/vmalloc.h - */ - -#define VMALLOC_END 0xfe800000UL diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index cc431fa22ccb..0c6ad63f10c7 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -10,7 +10,6 @@ #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> -#include <linux/mbus.h> #include <linux/io.h> #include <mach/hardware.h> #include <plat/mpp.h> diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h index ac787957e2d9..e8fda45c0736 100644 --- a/arch/arm/mach-kirkwood/mpp.h +++ b/arch/arm/mach-kirkwood/mpp.h @@ -102,6 +102,7 @@ #define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 ) #define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 ) #define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 ) #define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 ) #define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 ) diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c index 9a1e917352f7..85f6169c2484 100644 --- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c +++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c @@ -169,4 +169,5 @@ MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c index 8849bcc7328e..e6bba01bae38 100644 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -264,6 +264,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END #endif @@ -275,6 +276,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END #endif @@ -286,5 +288,6 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c index 1ba12c4dff8f..31ae8de34e93 100644 --- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c +++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c @@ -405,6 +405,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END #endif @@ -416,5 +417,6 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index 5660ca6c3d88..01f8c8992880 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -220,6 +220,7 @@ MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END #endif @@ -232,6 +233,7 @@ MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END #endif @@ -244,5 +246,6 @@ MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 74b992d810ea..a066a6d8d9d2 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -11,12 +11,12 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/slab.h> -#include <linux/mbus.h> #include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> #include <plat/pcie.h> #include <mach/bridge-regs.h> +#include <plat/addr-map.h> #include "common.h" void kirkwood_enable_pcie(void) @@ -198,9 +198,8 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) if (request_resource(&iomem_resource, &pp->res[1])) panic("Request PCIe%d Memory resource failed\n", index); - sys->resource[0] = &pp->res[0]; - sys->resource[1] = &pp->res[1]; - sys->resource[2] = NULL; + pci_add_resource(&sys->resources, &pp->res[0]); + pci_add_resource(&sys->resources, &pp->res[1]); sys->io_offset = 0; /* @@ -208,7 +207,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) */ orion_pcie_set_local_bus_nr(pp->base, sys->busnr); - orion_pcie_setup(pp->base, &kirkwood_mbus_dram_info); + orion_pcie_setup(pp->base); return 1; } @@ -236,7 +235,8 @@ kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys) struct pci_bus *bus; if (nr < num_pcie_ports) { - bus = pci_scan_bus(sys->busnr, &pcie_ops, sys); + bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys, + &sys->resources); } else { bus = NULL; BUG(); diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c index 6663869773ab..fd2c9c8b6831 100644 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c @@ -85,4 +85,5 @@ MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index 66b3c05e37a6..ef922079348b 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -121,4 +121,5 @@ MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index 8b102d62e82c..4ea70e5f7137 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -107,7 +107,7 @@ static void __init sheevaplug_init(void) kirkwood_init(); /* setup gpio pin select */ - if (machine_is_sheeva_esata()) + if (machine_is_esata_sheevaplug()) kirkwood_mpp_conf(sheeva_esata_mpp_config); else kirkwood_mpp_conf(sheevaplug_mpp_config); @@ -123,11 +123,11 @@ static void __init sheevaplug_init(void) kirkwood_ge00_init(&sheevaplug_ge00_data); /* honor lower power consumption for plugs with out eSATA */ - if (machine_is_sheeva_esata()) + if (machine_is_esata_sheevaplug()) kirkwood_sata_init(&sheeva_esata_sata_data); /* enable sd wp and sd cd on plugs with esata */ - if (machine_is_sheeva_esata()) + if (machine_is_esata_sheevaplug()) kirkwood_sdio_init(&sheeva_esata_mvsdio_data); else kirkwood_sdio_init(&sheevaplug_mvsdio_data); @@ -144,6 +144,7 @@ MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END #endif @@ -155,5 +156,6 @@ MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c index ea104fb5ec3d..966b2b3bb813 100644 --- a/arch/arm/mach-kirkwood/t5325-setup.c +++ b/arch/arm/mach-kirkwood/t5325-setup.c @@ -207,4 +207,5 @@ MACHINE_START(T5325, "HP t5325 Thin Client") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 262c034836d4..73e2b6ca9564 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -138,4 +138,5 @@ MACHINE_START(TS219, "QNAP TS-119/TS-219") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index b68f5b4a9ec8..5bbca2680442 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -182,4 +182,5 @@ MACHINE_START(TS41X, "QNAP TS-41x") .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, + .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c index a91f99d265aa..255502ddd879 100644 --- a/arch/arm/mach-ks8695/board-acs5k.c +++ b/arch/arm/mach-ks8695/board-acs5k.c @@ -228,4 +228,5 @@ MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board") .init_irq = ks8695_init_irq, .init_machine = acs5k_init, .timer = &ks8695_timer, + .restart = ks8695_restart, MACHINE_END diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c index d24bcef2e2dd..e0d36cef2c56 100644 --- a/arch/arm/mach-ks8695/board-dsm320.c +++ b/arch/arm/mach-ks8695/board-dsm320.c @@ -126,4 +126,5 @@ MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player") .init_irq = ks8695_init_irq, .init_machine = dsm320_init, .timer = &ks8695_timer, + .restart = ks8695_restart, MACHINE_END diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c index 16c95657f8fd..a8270725b76d 100644 --- a/arch/arm/mach-ks8695/board-micrel.c +++ b/arch/arm/mach-ks8695/board-micrel.c @@ -58,4 +58,5 @@ MACHINE_START(KS8695, "KS8695 Centaur Development Board") .init_irq = ks8695_init_irq, .init_machine = micrel_init, .timer = &ks8695_timer, + .restart = ks8695_restart, MACHINE_END diff --git a/arch/arm/mach-ks8695/generic.h b/arch/arm/mach-ks8695/generic.h index 2fbfab8d5fae..f8bdb11a9c33 100644 --- a/arch/arm/mach-ks8695/generic.h +++ b/arch/arm/mach-ks8695/generic.h @@ -12,4 +12,5 @@ extern __init void ks8695_map_io(void); extern __init void ks8695_init_irq(void); +extern void ks8695_restart(char, const char *); extern struct sys_timer ks8695_timer; diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h index fb1dda9be2d0..59fe992395bf 100644 --- a/arch/arm/mach-ks8695/include/mach/system.h +++ b/arch/arm/mach-ks8695/include/mach/system.h @@ -14,9 +14,6 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <linux/io.h> -#include <mach/regs-timer.h> - static void arch_idle(void) { /* @@ -27,22 +24,4 @@ static void arch_idle(void) } -static void arch_reset(char mode, const char *cmd) -{ - unsigned int reg; - - if (mode == 's') - cpu_reset(0); - - /* disable timer0 */ - reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); - __raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); - - /* enable watchdog mode */ - __raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC); - - /* re-enable timer0 */ - __raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); -} - #endif diff --git a/arch/arm/mach-ks8695/include/mach/vmalloc.h b/arch/arm/mach-ks8695/include/mach/vmalloc.h deleted file mode 100644 index 744ac66be3a2..000000000000 --- a/arch/arm/mach-ks8695/include/mach/vmalloc.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/vmalloc.h - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk> - * - * KS8695 vmalloc definition - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END (KS8695_IO_VA & PGDIR_MASK) - -#endif diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c index a78092dcd6fb..76802aac0f45 100644 --- a/arch/arm/mach-ks8695/irq.c +++ b/arch/arm/mach-ks8695/irq.c @@ -23,7 +23,7 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/ioport.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/io.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c index c7c9a188d105..b26f992071df 100644 --- a/arch/arm/mach-ks8695/pci.c +++ b/arch/arm/mach-ks8695/pci.c @@ -143,7 +143,8 @@ static struct pci_ops ks8695_pci_ops = { static struct pci_bus* __init ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys) { - return pci_scan_bus(sys->busnr, &ks8695_pci_ops, sys); + return pci_scan_root_bus(NULL, sys->busnr, &ks8695_pci_ops, sys, + &sys->resources); } static struct resource pci_mem = { @@ -168,9 +169,8 @@ static int __init ks8695_pci_setup(int nr, struct pci_sys_data *sys) request_resource(&iomem_resource, &pci_mem); request_resource(&ioport_resource, &pci_io); - sys->resource[0] = &pci_io; - sys->resource[1] = &pci_mem; - sys->resource[2] = NULL; + pci_add_resource(&sys->resources, &pci_io); + pci_add_resource(&sys->resources, &pci_mem); /* Assign and enable processor bridge */ ks8695_local_writeconfig(PCI_BASE_ADDRESS_0, KS8695_PCIMEM_PA); diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c index 69c072c2c0f9..37dfcd5bd2ad 100644 --- a/arch/arm/mach-ks8695/time.c +++ b/arch/arm/mach-ks8695/time.c @@ -109,3 +109,21 @@ struct sys_timer ks8695_timer = { .offset = ks8695_gettimeoffset, .resume = ks8695_timer_setup, }; + +void ks8695_restart(char mode, const char *cmd) +{ + unsigned int reg; + + if (mode == 's') + soft_restart(0); + + /* disable timer0 */ + reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); + __raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); + + /* enable watchdog mode */ + __raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC); + + /* re-enable timer0 */ + __raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); +} diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index 205b2dbb565b..369b152896cd 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c @@ -164,7 +164,7 @@ int clk_is_sysclk_mainosc(void) /* * System reset via the watchdog timer */ -void lpc32xx_watchdog_reset(void) +static void lpc32xx_watchdog_reset(void) { /* Make sure WDT clocks are enabled */ __raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN, @@ -311,3 +311,21 @@ void __init lpc32xx_map_io(void) { iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc)); } + +void lpc23xx_restart(char mode, const char *cmd) +{ + switch (mode) { + case 's': + case 'h': + lpc32xx_watchdog_reset(); + break; + + default: + /* Do nothing */ + break; + } + + /* Wait for watchdog to reset system */ + while (1) + ; +} diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h index 5583f52662bd..4b4e700343c1 100644 --- a/arch/arm/mach-lpc32xx/common.h +++ b/arch/arm/mach-lpc32xx/common.h @@ -39,6 +39,8 @@ extern void __init lpc32xx_init_irq(void); extern void __init lpc32xx_map_io(void); extern void __init lpc32xx_serial_init(void); extern void __init lpc32xx_gpio_init(void); +extern void lpc23xx_restart(char, const char *); + /* * Structure used for setting up and querying the PLLS diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/system.h index df3b0dea4d7b..bf176c991520 100644 --- a/arch/arm/mach-lpc32xx/include/mach/system.h +++ b/arch/arm/mach-lpc32xx/include/mach/system.h @@ -24,29 +24,4 @@ static void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ - extern void lpc32xx_watchdog_reset(void); - - switch (mode) { - case 's': - case 'h': - printk(KERN_CRIT "RESET: Rebooting system\n"); - - /* Disable interrupts */ - local_irq_disable(); - - lpc32xx_watchdog_reset(); - break; - - default: - /* Do nothing */ - break; - } - - /* Wait for watchdog to reset system */ - while (1) - ; -} - #endif diff --git a/arch/arm/mach-lpc32xx/include/mach/vmalloc.h b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h deleted file mode 100644 index 720fa43a60bf..000000000000 --- a/arch/arm/mach-lpc32xx/include/mach/vmalloc.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/include/mach/vmalloc.h - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END 0xF0000000UL - -#endif diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 6d2f0d1b9373..bfee5b455105 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -18,7 +18,7 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/dma-mapping.h> @@ -388,4 +388,5 @@ MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller") .init_irq = lpc32xx_init_irq, .timer = &lpc32xx_timer, .init_machine = phy3250_board_init, + .restart = lpc23xx_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 7a60bbbce7a4..17cb76060125 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -120,8 +120,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(27), - .end = gpio_to_irq(27), + .start = MMP_GPIO_TO_IRQ(27), + .end = MMP_GPIO_TO_IRQ(27), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -232,6 +232,7 @@ static void __init common_init(void) pxa168_add_nand(&aspenite_nand_info); pxa168_add_fb(&aspenite_lcd_info); pxa168_add_keypad(&aspenite_keypad_info); + platform_device_register(&pxa168_device_gpio); /* off-chip devices */ platform_device_register(&smc91x_device); @@ -243,6 +244,7 @@ MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform") .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = common_init, + .restart = pxa168_restart, MACHINE_END MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform") @@ -251,4 +253,5 @@ MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform") .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = common_init, + .restart = pxa168_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c index 39f0878d64a0..b148a9dc5a44 100644 --- a/arch/arm/mach-mmp/avengers_lite.c +++ b/arch/arm/mach-mmp/avengers_lite.c @@ -38,6 +38,7 @@ static void __init avengers_lite_init(void) /* on-chip devices */ pxa168_add_uart(2); + platform_device_register(&pxa168_device_gpio); } MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform") @@ -45,4 +46,5 @@ MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform") .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = avengers_lite_init, + .restart = pxa168_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index 983cfb15fbde..d839fe6421e6 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -202,6 +202,7 @@ static void __init brownstone_init(void) /* on-chip devices */ mmp2_add_uart(1); mmp2_add_uart(3); + platform_device_register(&mmp2_device_gpio); mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info)); mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */ mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */ @@ -219,4 +220,5 @@ MACHINE_START(BROWNSTONE, "Brownstone Development Platform") .init_irq = mmp2_init_irq, .timer = &mmp2_timer, .init_machine = brownstone_init, + .restart = mmp_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c index 5720674739f0..062b5b93c50e 100644 --- a/arch/arm/mach-mmp/common.c +++ b/arch/arm/mach-mmp/common.c @@ -45,3 +45,8 @@ void __init mmp_map_io(void) /* this is early, initialize mmp_chip_id here */ mmp_chip_id = __raw_readl(MMP_CHIPID); } + +void mmp_restart(char mode, const char *cmd) +{ + soft_restart(0); +} diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h index ec8d65ded25c..1c9d6c1ea97a 100644 --- a/arch/arm/mach-mmp/common.h +++ b/arch/arm/mach-mmp/common.h @@ -6,3 +6,4 @@ extern void timer_init(int irq); extern void __init icu_init_irq(void); extern void __init mmp_map_io(void); +extern void mmp_restart(char, const char *); diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c index c4fd806b15b4..2ee8cd7829dd 100644 --- a/arch/arm/mach-mmp/flint.c +++ b/arch/arm/mach-mmp/flint.c @@ -87,8 +87,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(155), - .end = gpio_to_irq(155), + .start = MMP_GPIO_TO_IRQ(155), + .end = MMP_GPIO_TO_IRQ(155), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -110,6 +110,7 @@ static void __init flint_init(void) /* on-chip devices */ mmp2_add_uart(1); mmp2_add_uart(2); + platform_device_register(&mmp2_device_gpio); /* off-chip devices */ platform_device_register(&smc91x_device); @@ -121,4 +122,5 @@ MACHINE_START(FLINT, "Flint Development Platform") .init_irq = mmp2_init_irq, .timer = &mmp2_timer, .init_machine = flint_init, + .restart = mmp_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index 4665767a4f79..87765467de63 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -184,6 +184,7 @@ static void __init gplugd_init(void) pxa168_add_uart(3); pxa168_add_ssp(1); pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info)); + platform_device_register(&pxa168_device_gpio); pxa168_add_eth(&gplugd_eth_platform_data); } @@ -194,4 +195,5 @@ MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform") .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = gplugd_init, + .restart = pxa168_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h index 99b4ce1b6562..0e135a599f3e 100644 --- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h +++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h @@ -2,6 +2,7 @@ #define __ASM_MACH_GPIO_PXA_H #include <mach/addr-map.h> +#include <mach/cputype.h> #include <mach/irqs.h> #define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) @@ -9,8 +10,6 @@ #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) #define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) -#define NR_BUILTIN_GPIO IRQ_GPIO_NUM - #define gpio_to_bank(gpio) ((gpio) >> 5) /* NOTE: these macros are defined here to make optimization of diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h index 681262359d1c..13219ebf5128 100644 --- a/arch/arm/mach-mmp/include/mach/gpio.h +++ b/arch/arm/mach-mmp/include/mach/gpio.h @@ -3,11 +3,6 @@ #include <asm-generic/gpio.h> -#define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio)) -#define irq_to_gpio(irq) ((irq) - IRQ_GPIO_START) +#include <mach/cputype.h> -#define __gpio_is_inverted(gpio) (0) -#define __gpio_is_occupied(gpio) (0) - -#include <plat/gpio.h> #endif /* __ASM_MACH_GPIO_H */ diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h index a09d328e2ddd..34635a0bbb59 100644 --- a/arch/arm/mach-mmp/include/mach/irqs.h +++ b/arch/arm/mach-mmp/include/mach/irqs.h @@ -219,10 +219,10 @@ #define IRQ_MMP2_MUX_END (IRQ_MMP2_SSP_BASE + 2) #define IRQ_GPIO_START 128 -#define IRQ_GPIO_NUM 192 -#define IRQ_GPIO(x) (IRQ_GPIO_START + (x)) +#define MMP_NR_BUILTIN_GPIO 192 +#define MMP_GPIO_TO_IRQ(gpio) (IRQ_GPIO_START + (gpio)) -#define IRQ_BOARD_START (IRQ_GPIO_START + IRQ_GPIO_NUM) +#define IRQ_BOARD_START (IRQ_GPIO_START + MMP_NR_BUILTIN_GPIO) #define NR_IRQS (IRQ_BOARD_START) diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h index 2f7b2d3c2b18..cba22fed2265 100644 --- a/arch/arm/mach-mmp/include/mach/mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mmp2.h @@ -32,6 +32,8 @@ extern struct pxa_device_desc mmp2_device_sdh3; extern struct pxa_device_desc mmp2_device_asram; extern struct pxa_device_desc mmp2_device_isram; +extern struct platform_device mmp2_device_gpio; + static inline int mmp2_add_uart(int id) { struct pxa_device_desc *d = NULL; diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index 7fb568d2845b..dc03d580a06d 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -5,6 +5,7 @@ struct sys_timer; extern struct sys_timer pxa168_timer; extern void __init pxa168_init_irq(void); +extern void pxa168_restart(char, const char *); extern void pxa168_clear_keypad_wakeup(void); #include <linux/i2c.h> @@ -42,6 +43,8 @@ struct pxa168_usb_pdata { /* pdata can be NULL */ int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata); +extern struct platform_device pxa168_device_gpio; + static inline int pxa168_add_uart(int id) { struct pxa_device_desc *d = NULL; diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h index 91be75591398..4de13abef7bb 100644 --- a/arch/arm/mach-mmp/include/mach/pxa910.h +++ b/arch/arm/mach-mmp/include/mach/pxa910.h @@ -21,6 +21,8 @@ extern struct pxa_device_desc pxa910_device_pwm3; extern struct pxa_device_desc pxa910_device_pwm4; extern struct pxa_device_desc pxa910_device_nand; +extern struct platform_device pxa910_device_gpio; + static inline int pxa910_add_uart(int id) { struct pxa_device_desc *d = NULL; diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h index 1a8a25edb1b4..1d001eab81e1 100644 --- a/arch/arm/mach-mmp/include/mach/system.h +++ b/arch/arm/mach-mmp/include/mach/system.h @@ -9,18 +9,8 @@ #ifndef __ASM_MACH_SYSTEM_H #define __ASM_MACH_SYSTEM_H -#include <mach/cputype.h> - static inline void arch_idle(void) { cpu_do_idle(); } - -static inline void arch_reset(char mode, const char *cmd) -{ - if (cpu_is_pxa168()) - cpu_reset(0xffff0000); - else - cpu_reset(0); -} #endif /* __ASM_MACH_SYSTEM_H */ diff --git a/arch/arm/mach-mmp/include/mach/vmalloc.h b/arch/arm/mach-mmp/include/mach/vmalloc.h deleted file mode 100644 index 1d0bac003ad0..000000000000 --- a/arch/arm/mach-mmp/include/mach/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/vmalloc.h - */ - -#define VMALLOC_END 0xfe000000UL diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index 8bfac6612623..96cf5c8fe47d 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -175,4 +175,5 @@ MACHINE_START(MARVELL_JASPER, "Jasper Development Platform") .init_irq = mmp2_init_irq, .timer = &mmp2_timer, .init_machine = jasper_init, + .restart = mmp_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 5dd1d4a6aeb9..617c60a170a4 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/platform_device.h> #include <asm/hardware/cache-tauros2.h> @@ -24,7 +25,6 @@ #include <mach/irqs.h> #include <mach/dma.h> #include <mach/mfp.h> -#include <mach/gpio-pxa.h> #include <mach/devices.h> #include <mach/mmp2.h> @@ -33,8 +33,6 @@ #define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000) -#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c) - static struct mfp_addr_map mmp2_addr_map[] __initdata = { MFP_ADDR_X(GPIO0, GPIO58, 0x54), @@ -95,24 +93,9 @@ void mmp2_clear_pmic_int(void) __raw_writel(data, mfpr_pmic); } -static void __init mmp2_init_gpio(void) -{ - int i; - - /* enable GPIO clock */ - __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_MMP2_GPIO); - - /* unmask GPIO edge detection for all 6 banks -- APMASKx */ - for (i = 0; i < 6; i++) - __raw_writel(0xffffffff, APMASK(i)); - - pxa_init_gpio(IRQ_MMP2_GPIO, 0, 167, NULL); -} - void __init mmp2_init_irq(void) { mmp2_init_icu(); - mmp2_init_gpio(); } static void sdhc_clk_enable(struct clk *clk) @@ -149,6 +132,7 @@ static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000); static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000); static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000); static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000); +static APBC_CLK(gpio, MMP2_GPIO, 0, 26000000); static APMU_CLK(nand, NAND, 0xbf, 100000000); static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops); @@ -168,6 +152,7 @@ static struct clk_lookup mmp2_clkregs[] = { INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL), INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), + INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"), INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"), INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"), @@ -230,3 +215,21 @@ MMP2_DEVICE(asram, "asram", -1, NONE, 0xe0000000, 0x4000); /* 0xd1000000 ~ 0xd101ffff is reserved for secure processor */ MMP2_DEVICE(isram, "isram", -1, NONE, 0xd1020000, 0x18000); +struct resource mmp2_resource_gpio[] = { + { + .start = 0xd4019000, + .end = 0xd4019fff, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_MMP2_GPIO, + .end = IRQ_MMP2_GPIO, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mmp2_device_gpio = { + .name = "pxa-gpio", + .id = -1, + .num_resources = ARRAY_SIZE(mmp2_resource_gpio), + .resource = mmp2_resource_gpio, +}; diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 76ca15c00e45..7bc17eaa12eb 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -13,6 +13,7 @@ #include <linux/list.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/platform_device.h> #include <asm/mach/time.h> #include <mach/addr-map.h> @@ -20,7 +21,6 @@ #include <mach/regs-apbc.h> #include <mach/regs-apmu.h> #include <mach/irqs.h> -#include <mach/gpio-pxa.h> #include <mach/dma.h> #include <mach/devices.h> #include <mach/mfp.h> @@ -43,26 +43,9 @@ static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata = MFP_ADDR_END, }; -#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c) - -static void __init pxa168_init_gpio(void) -{ - int i; - - /* enable GPIO clock */ - __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA168_GPIO); - - /* unmask GPIO edge detection for all 4 banks - APMASKx */ - for (i = 0; i < 4; i++) - __raw_writel(0xffffffff, APMASK(i)); - - pxa_init_gpio(IRQ_PXA168_GPIOX, 0, 127, NULL); -} - void __init pxa168_init_irq(void) { icu_init_irq(); - pxa168_init_gpio(); } /* APB peripheral clocks */ @@ -80,6 +63,7 @@ static APBC_CLK(ssp2, PXA168_SSP2, 4, 0); static APBC_CLK(ssp3, PXA168_SSP3, 4, 0); static APBC_CLK(ssp4, PXA168_SSP4, 4, 0); static APBC_CLK(ssp5, PXA168_SSP5, 4, 0); +static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000); static APBC_CLK(keypad, PXA168_KPC, 0, 32000); static APMU_CLK(nand, NAND, 0x19b, 156000000); @@ -105,6 +89,7 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), + INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"), @@ -174,6 +159,25 @@ PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8); PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c); PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff); +struct resource pxa168_resource_gpio[] = { + { + .start = 0xd4019000, + .end = 0xd4019fff, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PXA168_GPIOX, + .end = IRQ_PXA168_GPIOX, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa168_device_gpio = { + .name = "pxa-gpio", + .id = -1, + .num_resources = ARRAY_SIZE(pxa168_resource_gpio), + .resource = pxa168_resource_gpio, +}; + struct resource pxa168_usb_host_resources[] = { /* USB Host conroller register base */ [0] = { @@ -214,3 +218,8 @@ int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata) pxa168_device_usb_host.dev.platform_data = pdata; return platform_device_register(&pxa168_device_usb_host); } + +void pxa168_restart(char mode, const char *cmd) +{ + soft_restart(0xffff0000); +} diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 4ebbfbba39fc..3241a25784d0 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/io.h> +#include <linux/platform_device.h> #include <asm/mach/time.h> #include <mach/addr-map.h> @@ -19,7 +20,6 @@ #include <mach/regs-apmu.h> #include <mach/cputype.h> #include <mach/irqs.h> -#include <mach/gpio-pxa.h> #include <mach/dma.h> #include <mach/mfp.h> #include <mach/devices.h> @@ -77,26 +77,9 @@ static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata = MFP_ADDR_END, }; -#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c) - -static void __init pxa910_init_gpio(void) -{ - int i; - - /* enable GPIO clock */ - __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA910_GPIO); - - /* unmask GPIO edge detection for all 4 banks - APMASKx */ - for (i = 0; i < 4; i++) - __raw_writel(0xffffffff, APMASK(i)); - - pxa_init_gpio(IRQ_PXA910_AP_GPIO, 0, 127, NULL); -} - void __init pxa910_init_irq(void) { icu_init_irq(); - pxa910_init_gpio(); } /* APB peripheral clocks */ @@ -108,6 +91,7 @@ static APBC_CLK(pwm1, PXA910_PWM1, 1, 13000000); static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000); static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000); static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000); +static APBC_CLK(gpio, PXA910_GPIO, 0, 13000000); static APMU_CLK(nand, NAND, 0x19b, 156000000); static APMU_CLK(u2o, USB, 0x1b, 480000000); @@ -123,6 +107,7 @@ static struct clk_lookup pxa910_clkregs[] = { INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL), INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), + INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"), }; @@ -179,3 +164,22 @@ PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10); PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10); PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10); PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99); + +struct resource pxa910_resource_gpio[] = { + { + .start = 0xd4019000, + .end = 0xd4019fff, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PXA910_AP_GPIO, + .end = IRQ_PXA910_AP_GPIO, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa910_device_gpio = { + .name = "pxa-gpio", + .id = -1, + .num_resources = ARRAY_SIZE(pxa910_resource_gpio), + .resource = pxa910_resource_gpio, +}; diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index eb5be879fd8c..8e3b5af04a57 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -19,6 +19,7 @@ #include <mach/addr-map.h> #include <mach/mfp-pxa910.h> #include <mach/pxa910.h> +#include <mach/irqs.h> #include "common.h" @@ -71,8 +72,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(80), - .end = gpio_to_irq(80), + .start = MMP_GPIO_TO_IRQ(80), + .end = MMP_GPIO_TO_IRQ(80), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -93,6 +94,7 @@ static void __init tavorevb_init(void) /* on-chip devices */ pxa910_add_uart(1); + platform_device_register(&pxa910_device_gpio); /* off-chip devices */ platform_device_register(&smc91x_device); @@ -103,4 +105,5 @@ MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)") .init_irq = pxa910_init_irq, .timer = &pxa910_timer, .init_machine = tavorevb_init, + .restart = mmp_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c index bbe4727b96cc..0523e422990e 100644 --- a/arch/arm/mach-mmp/teton_bga.c +++ b/arch/arm/mach-mmp/teton_bga.c @@ -66,7 +66,7 @@ static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = { static struct i2c_board_info teton_bga_i2c_info[] __initdata = { { I2C_BOARD_INFO("ds1337", 0x68), - .irq = gpio_to_irq(RTC_INT_GPIO) + .irq = MMP_GPIO_TO_IRQ(RTC_INT_GPIO) }, }; @@ -78,6 +78,7 @@ static void __init teton_bga_init(void) pxa168_add_uart(1); pxa168_add_keypad(&teton_bga_keypad_info); pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info)); + platform_device_register(&pxa168_device_gpio); } MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform") @@ -86,4 +87,5 @@ MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform") .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = teton_bga_init, + .restart = pxa168_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 4e91ee6e27c8..71fc4ee4602c 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -25,7 +25,6 @@ #include <linux/io.h> #include <linux/irq.h> -#include <linux/sched.h> #include <asm/sched_clock.h> #include <mach/addr-map.h> @@ -42,8 +41,6 @@ #define MAX_DELTA (0xfffffffe) #define MIN_DELTA (16) -static DEFINE_CLOCK_DATA(cd); - /* * FIXME: the timer needs some delay to stablize the counter capture */ @@ -59,16 +56,9 @@ static inline uint32_t timer_read(void) return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1)); } -unsigned long long notrace sched_clock(void) +static u32 notrace mmp_read_sched_clock(void) { - u32 cyc = timer_read(); - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -static void notrace mmp_update_sched_clock(void) -{ - u32 cyc = timer_read(); - update_sched_clock(&cd, cyc, (u32)~0); + return timer_read(); } static irqreturn_t timer_interrupt(int irq, void *dev_id) @@ -201,7 +191,7 @@ void __init timer_init(int irq) { timer_config(); - init_sched_clock(&cd, mmp_update_sched_clock, 32, CLOCK_TICK_RATE); + setup_sched_clock(mmp_read_sched_clock, 32, CLOCK_TICK_RATE); ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift); ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt); diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 176515a76989..5ac5d5832e45 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -24,12 +24,13 @@ #include <mach/addr-map.h> #include <mach/mfp-pxa910.h> #include <mach/pxa910.h> +#include <mach/irqs.h> #include "common.h" -#define TTCDKB_GPIO_EXT0(x) (NR_BUILTIN_GPIO + ((x < 0) ? 0 : \ +#define TTCDKB_GPIO_EXT0(x) (MMP_NR_BUILTIN_GPIO + ((x < 0) ? 0 : \ ((x < 16) ? x : 15))) -#define TTCDKB_GPIO_EXT1(x) (NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \ +#define TTCDKB_GPIO_EXT1(x) (MMP_NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \ ((x < 16) ? x : 15))) /* @@ -122,6 +123,7 @@ static struct platform_device ttc_dkb_device_onenand = { }; static struct platform_device *ttc_dkb_devices[] = { + &pxa910_device_gpio, &ttc_dkb_device_onenand, }; @@ -136,7 +138,7 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = { { .type = "max7312", .addr = 0x23, - .irq = IRQ_GPIO(80), + .irq = MMP_GPIO_TO_IRQ(80), .platform_data = &max7312_data, }, }; @@ -159,4 +161,5 @@ MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform") .init_irq = pxa910_init_irq, .timer = &pxa910_timer, .init_machine = ttc_dkb_init, + .restart = mmp_restart, MACHINE_END diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index ebde97f5d5f0..1cd40ad301d3 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -13,7 +13,6 @@ config ARCH_MSM7X00A select CPU_V6 select GPIO_MSM_V1 select MSM_PROC_COMM - select HAS_MSM_DEBUG_UART_PHYS config ARCH_MSM7X30 bool "MSM7x30" @@ -25,7 +24,6 @@ config ARCH_MSM7X30 select MSM_GPIOMUX select GPIO_MSM_V1 select MSM_PROC_COMM - select HAS_MSM_DEBUG_UART_PHYS config ARCH_QSD8X50 bool "QSD8X50" @@ -37,7 +35,6 @@ config ARCH_QSD8X50 select MSM_GPIOMUX select GPIO_MSM_V1 select MSM_PROC_COMM - select HAS_MSM_DEBUG_UART_PHYS config ARCH_MSM8X60 bool "MSM8X60" @@ -63,19 +60,20 @@ config ARCH_MSM8960 endchoice +config MSM_HAS_DEBUG_UART_HS + bool + config MSM_SOC_REV_A bool config ARCH_MSM_SCORPIONMP bool + select HAVE_SMP config ARCH_MSM_ARM11 bool config ARCH_MSM_SCORPION bool -config HAS_MSM_DEBUG_UART_PHYS - bool - config MSM_VIC bool @@ -152,32 +150,6 @@ config MACH_MSM8960_RUMI3 endmenu -config MSM_DEBUG_UART - int - default 1 if MSM_DEBUG_UART1 - default 2 if MSM_DEBUG_UART2 - default 3 if MSM_DEBUG_UART3 - -if HAS_MSM_DEBUG_UART_PHYS -choice - prompt "Debug UART" - - default MSM_DEBUG_UART_NONE - - config MSM_DEBUG_UART_NONE - bool "None" - - config MSM_DEBUG_UART1 - bool "UART1" - - config MSM_DEBUG_UART2 - bool "UART2" - - config MSM_DEBUG_UART3 - bool "UART3" -endchoice -endif - config MSM_SMD_PKG3 bool diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c index 6dc1cbd2a595..ed3598128530 100644 --- a/arch/arm/mach-msm/board-msm8960.c +++ b/arch/arm/mach-msm/board-msm8960.c @@ -99,6 +99,7 @@ MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") .map_io = msm8960_map_io, .init_irq = msm8960_init_irq, .timer = &msm_timer, + .handle_irq = gic_handle_irq, .init_machine = msm8960_sim_init, MACHINE_END @@ -108,6 +109,7 @@ MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3") .map_io = msm8960_map_io, .init_irq = msm8960_init_irq, .timer = &msm_timer, + .handle_irq = gic_handle_irq, .init_machine = msm8960_rumi3_init, MACHINE_END diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 44bf71688373..0a113424632c 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -108,6 +108,7 @@ MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, + .handle_irq = gic_handle_irq, .init_machine = msm8x60_init, .timer = &msm_timer, MACHINE_END @@ -117,6 +118,7 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, + .handle_irq = gic_handle_irq, .init_machine = msm8x60_init, .timer = &msm_timer, MACHINE_END @@ -126,6 +128,7 @@ MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, + .handle_irq = gic_handle_irq, .init_machine = msm8x60_init, .timer = &msm_timer, MACHINE_END @@ -135,6 +138,7 @@ MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA") .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, + .handle_irq = gic_handle_irq, .init_machine = msm8x60_init, .timer = &msm_timer, MACHINE_END diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index 32b465763dbd..97b8191d9d38 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -18,7 +18,7 @@ #include <linux/input.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/delay.h> diff --git a/arch/arm/mach-msm/devices-iommu.c b/arch/arm/mach-msm/devices-iommu.c index 24030d0da6e3..0fb7a17df398 100644 --- a/arch/arm/mach-msm/devices-iommu.c +++ b/arch/arm/mach-msm/devices-iommu.c @@ -18,6 +18,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/bootmem.h> +#include <linux/module.h> #include <mach/irqs.h> #include <mach/iommu.h> diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S index 2dc73ccddb11..3ffd8668c9a5 100644 --- a/arch/arm/mach-msm/include/mach/debug-macro.S +++ b/arch/arm/mach-msm/include/mach/debug-macro.S @@ -1,6 +1,7 @@ -/* arch/arm/mach-msm7200/include/mach/debug-macro.S +/* * * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2011, Code Aurora Forum. All rights reserved. * Author: Brian Swetland <swetland@google.com> * * This software is licensed under the terms of the GNU General Public @@ -14,40 +15,52 @@ * */ - - #include <mach/hardware.h> #include <mach/msm_iomap.h> -#if defined(CONFIG_HAS_MSM_DEBUG_UART_PHYS) && !defined(CONFIG_MSM_DEBUG_UART_NONE) .macro addruart, rp, rv, tmp +#ifdef MSM_DEBUG_UART_PHYS ldr \rp, =MSM_DEBUG_UART_PHYS ldr \rv, =MSM_DEBUG_UART_BASE +#endif .endm - .macro senduart,rd,rx + .macro senduart, rd, rx +#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS + @ Write the 1 character to UARTDM_TF + str \rd, [\rx, #0x70] +#else teq \rx, #0 strne \rd, [\rx, #0x0C] +#endif .endm - .macro waituart,rd,rx + .macro waituart, rd, rx +#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS + @ check for TX_EMT in UARTDM_SR + ldr \rd, [\rx, #0x08] + tst \rd, #0x08 + bne 1002f + @ wait for TXREADY in UARTDM_ISR +1001: ldr \rd, [\rx, #0x14] + tst \rd, #0x80 + beq 1001b +1002: + @ Clear TX_READY by writing to the UARTDM_CR register + mov \rd, #0x300 + str \rd, [\rx, #0x10] + @ Write 0x1 to NCF register + mov \rd, #0x1 + str \rd, [\rx, #0x40] + @ UARTDM reg. Read to induce delay + ldr \rd, [\rx, #0x08] +#else @ wait for TX_READY 1001: ldr \rd, [\rx, #0x08] tst \rd, #0x04 beq 1001b - .endm -#else - .macro addruart, rp, rv, tmp - mov \rv, #0xff000000 - orr \rv, \rv, #0x00f00000 - .endm - - .macro senduart,rd,rx - .endm - - .macro waituart,rd,rx - .endm #endif + .endm - .macro busyuart,rd,rx + .macro busyuart, rd, rx .endm diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S deleted file mode 100644 index 717076f3ca73..000000000000 --- a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Low-level IRQ helper macros - * - * Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <asm/hardware/entry-macro-gic.S> - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-msm/include/mach/entry-macro-vic.S b/arch/arm/mach-msm/include/mach/entry-macro-vic.S deleted file mode 100644 index 70563ed11b36..000000000000 --- a/arch/arm/mach-msm/include/mach/entry-macro-vic.S +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <mach/msm_iomap.h> - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - @ enable imprecise aborts - cpsie a - mov \base, #MSM_VIC_BASE - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - @ 0xD0 has irq# or old irq# if the irq has been handled - @ 0xD4 has irq# or -1 if none pending *but* if you just - @ read 0xD4 you never get the first irq for some reason - ldr \irqnr, [\base, #0xD0] - ldr \irqnr, [\base, #0xD4] - cmp \irqnr, #0xffffffff - .endm diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S index b16f082eeb6f..41f7003ef34f 100644 --- a/arch/arm/mach-msm/include/mach/entry-macro.S +++ b/arch/arm/mach-msm/include/mach/entry-macro.S @@ -16,8 +16,27 @@ * */ -#if defined(CONFIG_ARM_GIC) -#include <mach/entry-macro-qgic.S> -#else -#include <mach/entry-macro-vic.S> + .macro disable_fiq + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + +#if !defined(CONFIG_ARM_GIC) +#include <mach/msm_iomap.h> + + .macro get_irqnr_preamble, base, tmp + @ enable imprecise aborts + cpsie a + mov \base, #MSM_VIC_BASE + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + @ 0xD0 has irq# or old irq# if the irq has been handled + @ 0xD4 has irq# or -1 if none pending *but* if you just + @ read 0xD4 you never get the first irq for some reason + ldr \irqnr, [\base, #0xD0] + ldr \irqnr, [\base, #0xD4] + cmp \irqnr, #0xffffffff + .endm #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h index 94fe9fe6feb3..8af46123dab6 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h @@ -78,18 +78,6 @@ #define MSM_UART3_PHYS 0xA9C00000 #define MSM_UART3_SIZE SZ_4K -#ifdef CONFIG_MSM_DEBUG_UART -#define MSM_DEBUG_UART_BASE 0xE1000000 -#if CONFIG_MSM_DEBUG_UART == 1 -#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS -#elif CONFIG_MSM_DEBUG_UART == 2 -#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS -#elif CONFIG_MSM_DEBUG_UART == 3 -#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS -#endif -#define MSM_DEBUG_UART_SIZE SZ_4K -#endif - #define MSM_SDC1_PHYS 0xA0400000 #define MSM_SDC1_SIZE SZ_4K diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h index 37694442d1bd..198202c267c8 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h @@ -89,18 +89,6 @@ #define MSM_UART3_PHYS 0xACC00000 #define MSM_UART3_SIZE SZ_4K -#ifdef CONFIG_MSM_DEBUG_UART -#define MSM_DEBUG_UART_BASE 0xE1000000 -#if CONFIG_MSM_DEBUG_UART == 1 -#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS -#elif CONFIG_MSM_DEBUG_UART == 2 -#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS -#elif CONFIG_MSM_DEBUG_UART == 3 -#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS -#endif -#define MSM_DEBUG_UART_SIZE SZ_4K -#endif - #define MSM_MDC_BASE IOMEM(0xE0200000) #define MSM_MDC_PHYS 0xAA500000 #define MSM_MDC_SIZE SZ_1M diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h index 3c9d9602a318..800b55767e6b 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h @@ -45,4 +45,9 @@ #define MSM8960_TMR0_PHYS 0x0208A000 #define MSM8960_TMR0_SIZE SZ_4K +#ifdef CONFIG_DEBUG_MSM8960_UART +#define MSM_DEBUG_UART_BASE 0xE1040000 +#define MSM_DEBUG_UART_PHYS 0x16440000 +#endif + #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h index d67cd73316f4..0faa894729b7 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h @@ -83,18 +83,6 @@ #define MSM_UART3_PHYS 0xA9C00000 #define MSM_UART3_SIZE SZ_4K -#ifdef CONFIG_MSM_DEBUG_UART -#define MSM_DEBUG_UART_BASE 0xE1000000 -#if CONFIG_MSM_DEBUG_UART == 1 -#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS -#elif CONFIG_MSM_DEBUG_UART == 2 -#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS -#elif CONFIG_MSM_DEBUG_UART == 3 -#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS -#endif -#define MSM_DEBUG_UART_SIZE SZ_4K -#endif - #define MSM_MDC_BASE IOMEM(0xE0200000) #define MSM_MDC_PHYS 0xAA500000 #define MSM_MDC_SIZE SZ_1M diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h index 3b19b8f244b8..54e12caa8d86 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h @@ -62,4 +62,9 @@ #define MSM8X60_TMR0_PHYS 0x02040000 #define MSM8X60_TMR0_SIZE SZ_4K +#ifdef CONFIG_DEBUG_MSM8660_UART +#define MSM_DEBUG_UART_BASE 0xE1040000 +#define MSM_DEBUG_UART_PHYS 0x19C40000 +#endif + #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h index 4ded15238b60..90682f4599d3 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap.h @@ -55,6 +55,18 @@ #include "msm_iomap-8960.h" +#define MSM_DEBUG_UART_SIZE SZ_4K +#if defined(CONFIG_DEBUG_MSM_UART1) +#define MSM_DEBUG_UART_BASE 0xE1000000 +#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS +#elif defined(CONFIG_DEBUG_MSM_UART2) +#define MSM_DEBUG_UART_BASE 0xE1000000 +#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS +#elif defined(CONFIG_DEBUG_MSM_UART3) +#define MSM_DEBUG_UART_BASE 0xE1000000 +#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS +#endif + /* Virtual addresses shared across all MSM targets. */ #define MSM_CSR_BASE IOMEM(0xE0001000) #define MSM_QGIC_DIST_BASE IOMEM(0xF0000000) diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h index d2e83f42ba16..311db2b35da0 100644 --- a/arch/arm/mach-msm/include/mach/system.h +++ b/arch/arm/mach-msm/include/mach/system.h @@ -12,16 +12,8 @@ * GNU General Public License for more details. * */ - -#include <mach/hardware.h> - void arch_idle(void); -static inline void arch_reset(char mode, const char *cmd) -{ - for (;;) ; /* depends on IPC w/ other core */ -} - /* low level hardware reset hook -- for example, hitting the * PSHOLD line on the PMIC to hard reset the system */ diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h index d94292c29d8e..169a84007456 100644 --- a/arch/arm/mach-msm/include/mach/uncompress.h +++ b/arch/arm/mach-msm/include/mach/uncompress.h @@ -1,6 +1,6 @@ -/* arch/arm/mach-msm/include/mach/uncompress.h - * +/* * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2011, Code Aurora Forum. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -14,17 +14,40 @@ */ #ifndef __ASM_ARCH_MSM_UNCOMPRESS_H +#define __ASM_ARCH_MSM_UNCOMPRESS_H + +#include <asm/processor.h> +#include <mach/msm_iomap.h> + +#define UART_CSR (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08)) +#define UART_TF (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x0c)) -#include "hardware.h" -#include "linux/io.h" -#include "mach/msm_iomap.h" +#define UART_DM_SR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08))) +#define UART_DM_CR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x10))) +#define UART_DM_ISR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x14))) +#define UART_DM_NCHAR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x40))) +#define UART_DM_TF (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x70))) static void putc(int c) { #if defined(MSM_DEBUG_UART_PHYS) - unsigned base = MSM_DEBUG_UART_PHYS; - while (!(readl(base + 0x08) & 0x04)) ; - writel(c, base + 0x0c); +#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS + /* + * Wait for TX_READY to be set; but skip it if we have a + * TX underrun. + */ + if (UART_DM_SR & 0x08) + while (!(UART_DM_ISR & 0x80)) + cpu_relax(); + + UART_DM_CR = 0x300; + UART_DM_NCHAR = 0x1; + UART_DM_TF = c; +#else + while (!(UART_CSR & 0x04)) + cpu_relax(); + UART_TF = c; +#endif #endif } diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h deleted file mode 100644 index d138448eff16..000000000000 --- a/arch/arm/mach-msm/include/mach/vmalloc.h +++ /dev/null @@ -1,22 +0,0 @@ -/* arch/arm/mach-msm/include/mach/vmalloc.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_VMALLOC_H -#define __ASM_ARCH_MSM_VMALLOC_H - -#define VMALLOC_END 0xd0000000UL - -#endif - diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index 8759ecf7454f..578b04e42deb 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -47,7 +47,8 @@ static struct map_desc msm_io_desc[] __initdata = { MSM_CHIP_DEVICE(GPIO1, MSM7X00), MSM_CHIP_DEVICE(GPIO2, MSM7X00), MSM_DEVICE(CLK_CTL), -#ifdef CONFIG_MSM_DEBUG_UART +#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ + defined(CONFIG_DEBUG_MSM_UART3) MSM_DEVICE(DEBUG_UART), #endif #ifdef CONFIG_ARCH_MSM7X30 @@ -84,7 +85,8 @@ static struct map_desc qsd8x50_io_desc[] __initdata = { MSM_DEVICE(SCPLL), MSM_DEVICE(AD5), MSM_DEVICE(MDC), -#ifdef CONFIG_MSM_DEBUG_UART +#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ + defined(CONFIG_DEBUG_MSM_UART3) MSM_DEVICE(DEBUG_UART), #endif { @@ -109,6 +111,9 @@ static struct map_desc msm8x60_io_desc[] __initdata = { MSM_CHIP_DEVICE(TMR0, MSM8X60), MSM_DEVICE(ACC), MSM_DEVICE(GCC), +#ifdef CONFIG_DEBUG_MSM8660_UART + MSM_DEVICE(DEBUG_UART), +#endif }; void __init msm_map_msm8x60_io(void) @@ -123,6 +128,9 @@ static struct map_desc msm8960_io_desc[] __initdata = { MSM_CHIP_DEVICE(QGIC_CPU, MSM8960), MSM_CHIP_DEVICE(TMR, MSM8960), MSM_CHIP_DEVICE(TMR0, MSM8960), +#ifdef CONFIG_DEBUG_MSM8960_UART + MSM_DEVICE(DEBUG_UART), +#endif }; void __init msm_map_msm8960_io(void) @@ -146,7 +154,8 @@ static struct map_desc msm7x30_io_desc[] __initdata = { MSM_DEVICE(SAW), MSM_DEVICE(GCC), MSM_DEVICE(TCSR), -#ifdef CONFIG_MSM_DEBUG_UART +#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ + defined(CONFIG_DEBUG_MSM_UART3) MSM_DEVICE(DEBUG_UART), #endif { diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index fdec58aaa35c..0b3e357c4c8c 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -79,7 +79,7 @@ static __cpuinit void prepare_cold_cpu(unsigned int cpu) ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup), SCM_FLAG_COLDBOOT_CPU1); if (ret == 0) { - void *sc1_base_ptr; + void __iomem *sc1_base_ptr; sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2); if (sc1_base_ptr) { writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL); diff --git a/arch/arm/mach-msm/smd_debug.c b/arch/arm/mach-msm/smd_debug.c index 8736afff82f3..0c56a5aaf588 100644 --- a/arch/arm/mach-msm/smd_debug.c +++ b/arch/arm/mach-msm/smd_debug.c @@ -215,7 +215,7 @@ static const struct file_operations debug_ops = { .llseek = default_llseek, }; -static void debug_create(const char *name, mode_t mode, +static void debug_create(const char *name, umode_t mode, struct dentry *dent, int (*fill)(char *buf, int max)) { diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index afeeca52fc66..11d0d8f2656c 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -1,6 +1,7 @@ -/* linux/arch/arm/mach-msm/timer.c +/* * * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -13,306 +14,207 @@ * */ +#include <linux/clocksource.h> +#include <linux/clockchips.h> #include <linux/init.h> -#include <linux/time.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/clk.h> -#include <linux/clockchips.h> -#include <linux/delay.h> #include <linux/io.h> #include <asm/mach/time.h> #include <asm/hardware/gic.h> +#include <asm/localtimer.h> #include <mach/msm_iomap.h> #include <mach/cpu.h> +#include <mach/board.h> #define TIMER_MATCH_VAL 0x0000 #define TIMER_COUNT_VAL 0x0004 #define TIMER_ENABLE 0x0008 -#define TIMER_ENABLE_CLR_ON_MATCH_EN 2 -#define TIMER_ENABLE_EN 1 +#define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1) +#define TIMER_ENABLE_EN BIT(0) #define TIMER_CLEAR 0x000C #define DGT_CLK_CTL 0x0034 -enum { - DGT_CLK_CTL_DIV_1 = 0, - DGT_CLK_CTL_DIV_2 = 1, - DGT_CLK_CTL_DIV_3 = 2, - DGT_CLK_CTL_DIV_4 = 3, -}; -#define CSR_PROTECTION 0x0020 -#define CSR_PROTECTION_EN 1 +#define DGT_CLK_CTL_DIV_4 0x3 #define GPT_HZ 32768 -enum timer_location { - LOCAL_TIMER = 0, - GLOBAL_TIMER = 1, -}; - -#define MSM_GLOBAL_TIMER MSM_CLOCK_DGT - -/* TODO: Remove these ifdefs */ -#if defined(CONFIG_ARCH_QSD8X50) -#define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */ -#define MSM_DGT_SHIFT (0) -#elif defined(CONFIG_ARCH_MSM7X30) -#define DGT_HZ (24576000 / 4) /* 24.576 MHz (LPXO) / 4 by default */ -#define MSM_DGT_SHIFT (0) -#elif defined(CONFIG_ARCH_MSM8X60) || defined(CONFIG_ARCH_MSM8960) -#define DGT_HZ (27000000 / 4) /* 27 MHz (PXO) / 4 by default */ -#define MSM_DGT_SHIFT (0) -#else -#define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */ -#define MSM_DGT_SHIFT (5) -#endif +#define MSM_DGT_SHIFT 5 -struct msm_clock { - struct clock_event_device clockevent; - struct clocksource clocksource; - unsigned int irq; - void __iomem *regbase; - uint32_t freq; - uint32_t shift; - void __iomem *global_counter; - void __iomem *local_counter; - union { - struct clock_event_device *evt; - struct clock_event_device __percpu **percpu_evt; - }; -}; - -enum { - MSM_CLOCK_GPT, - MSM_CLOCK_DGT, - NR_TIMERS, -}; - - -static struct msm_clock msm_clocks[]; +static void __iomem *event_base; static irqreturn_t msm_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = *(struct clock_event_device **)dev_id; - if (evt->event_handler == NULL) - return IRQ_HANDLED; + /* Stop the timer tick */ + if (evt->mode == CLOCK_EVT_MODE_ONESHOT) { + u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE); + ctrl &= ~TIMER_ENABLE_EN; + writel_relaxed(ctrl, event_base + TIMER_ENABLE); + } evt->event_handler(evt); return IRQ_HANDLED; } -static cycle_t msm_read_timer_count(struct clocksource *cs) -{ - struct msm_clock *clk = container_of(cs, struct msm_clock, clocksource); - - /* - * Shift timer count down by a constant due to unreliable lower bits - * on some targets. - */ - return readl(clk->global_counter) >> clk->shift; -} - -static struct msm_clock *clockevent_to_clock(struct clock_event_device *evt) -{ -#ifdef CONFIG_SMP - int i; - for (i = 0; i < NR_TIMERS; i++) - if (evt == &(msm_clocks[i].clockevent)) - return &msm_clocks[i]; - return &msm_clocks[MSM_GLOBAL_TIMER]; -#else - return container_of(evt, struct msm_clock, clockevent); -#endif -} - static int msm_timer_set_next_event(unsigned long cycles, struct clock_event_device *evt) { - struct msm_clock *clock = clockevent_to_clock(evt); - uint32_t now = readl(clock->local_counter); - uint32_t alarm = now + (cycles << clock->shift); + u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE); - writel(alarm, clock->regbase + TIMER_MATCH_VAL); + writel_relaxed(0, event_base + TIMER_CLEAR); + writel_relaxed(cycles, event_base + TIMER_MATCH_VAL); + writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE); return 0; } static void msm_timer_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { - struct msm_clock *clock = clockevent_to_clock(evt); + u32 ctrl; + + ctrl = readl_relaxed(event_base + TIMER_ENABLE); + ctrl &= ~(TIMER_ENABLE_EN | TIMER_ENABLE_CLR_ON_MATCH_EN); switch (mode) { case CLOCK_EVT_MODE_RESUME: case CLOCK_EVT_MODE_PERIODIC: break; case CLOCK_EVT_MODE_ONESHOT: - writel(TIMER_ENABLE_EN, clock->regbase + TIMER_ENABLE); + /* Timer is enabled in set_next_event */ break; case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: - writel(0, clock->regbase + TIMER_ENABLE); break; } + writel_relaxed(ctrl, event_base + TIMER_ENABLE); } -static struct msm_clock msm_clocks[] = { - [MSM_CLOCK_GPT] = { - .clockevent = { - .name = "gp_timer", - .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, - .rating = 200, - .set_next_event = msm_timer_set_next_event, - .set_mode = msm_timer_set_mode, - }, - .clocksource = { - .name = "gp_timer", - .rating = 200, - .read = msm_read_timer_count, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, - }, - .irq = INT_GP_TIMER_EXP, - .freq = GPT_HZ, - }, - [MSM_CLOCK_DGT] = { - .clockevent = { - .name = "dg_timer", - .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32 + MSM_DGT_SHIFT, - .rating = 300, - .set_next_event = msm_timer_set_next_event, - .set_mode = msm_timer_set_mode, - }, - .clocksource = { - .name = "dg_timer", - .rating = 300, - .read = msm_read_timer_count, - .mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, - }, - .irq = INT_DEBUG_TIMER_EXP, - .freq = DGT_HZ >> MSM_DGT_SHIFT, - .shift = MSM_DGT_SHIFT, - } +static struct clock_event_device msm_clockevent = { + .name = "gp_timer", + .features = CLOCK_EVT_FEAT_ONESHOT, + .rating = 200, + .set_next_event = msm_timer_set_next_event, + .set_mode = msm_timer_set_mode, +}; + +static union { + struct clock_event_device *evt; + struct clock_event_device __percpu **percpu_evt; +} msm_evt; + +static void __iomem *source_base; + +static cycle_t msm_read_timer_count(struct clocksource *cs) +{ + return readl_relaxed(source_base + TIMER_COUNT_VAL); +} + +static cycle_t msm_read_timer_count_shift(struct clocksource *cs) +{ + /* + * Shift timer count down by a constant due to unreliable lower bits + * on some targets. + */ + return msm_read_timer_count(cs) >> MSM_DGT_SHIFT; +} + +static struct clocksource msm_clocksource = { + .name = "dg_timer", + .rating = 300, + .read = msm_read_timer_count, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; static void __init msm_timer_init(void) { - int i; + struct clock_event_device *ce = &msm_clockevent; + struct clocksource *cs = &msm_clocksource; int res; - int global_offset = 0; + u32 dgt_hz; if (cpu_is_msm7x01()) { - msm_clocks[MSM_CLOCK_GPT].regbase = MSM_CSR_BASE; - msm_clocks[MSM_CLOCK_DGT].regbase = MSM_CSR_BASE + 0x10; + event_base = MSM_CSR_BASE; + source_base = MSM_CSR_BASE + 0x10; + dgt_hz = 19200000 >> MSM_DGT_SHIFT; /* 600 KHz */ + cs->read = msm_read_timer_count_shift; + cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)); } else if (cpu_is_msm7x30()) { - msm_clocks[MSM_CLOCK_GPT].regbase = MSM_CSR_BASE + 0x04; - msm_clocks[MSM_CLOCK_DGT].regbase = MSM_CSR_BASE + 0x24; + event_base = MSM_CSR_BASE + 0x04; + source_base = MSM_CSR_BASE + 0x24; + dgt_hz = 24576000 / 4; } else if (cpu_is_qsd8x50()) { - msm_clocks[MSM_CLOCK_GPT].regbase = MSM_CSR_BASE; - msm_clocks[MSM_CLOCK_DGT].regbase = MSM_CSR_BASE + 0x10; + event_base = MSM_CSR_BASE; + source_base = MSM_CSR_BASE + 0x10; + dgt_hz = 19200000 / 4; } else if (cpu_is_msm8x60() || cpu_is_msm8960()) { - msm_clocks[MSM_CLOCK_GPT].regbase = MSM_TMR_BASE + 0x04; - msm_clocks[MSM_CLOCK_DGT].regbase = MSM_TMR_BASE + 0x24; - - /* Use CPU0's timer as the global timer. */ - global_offset = MSM_TMR0_BASE - MSM_TMR_BASE; + event_base = MSM_TMR_BASE + 0x04; + /* Use CPU0's timer as the global clock source. */ + source_base = MSM_TMR0_BASE + 0x24; + dgt_hz = 27000000 / 4; + writel_relaxed(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL); } else BUG(); -#ifdef CONFIG_ARCH_MSM_SCORPIONMP - writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL); -#endif - - for (i = 0; i < ARRAY_SIZE(msm_clocks); i++) { - struct msm_clock *clock = &msm_clocks[i]; - struct clock_event_device *ce = &clock->clockevent; - struct clocksource *cs = &clock->clocksource; - - clock->local_counter = clock->regbase + TIMER_COUNT_VAL; - clock->global_counter = clock->local_counter + global_offset; - - writel(0, clock->regbase + TIMER_ENABLE); - writel(0, clock->regbase + TIMER_CLEAR); - writel(~0, clock->regbase + TIMER_MATCH_VAL); - - ce->mult = div_sc(clock->freq, NSEC_PER_SEC, ce->shift); - /* allow at least 10 seconds to notice that the timer wrapped */ - ce->max_delta_ns = - clockevent_delta2ns(0xf0000000 >> clock->shift, ce); - /* 4 gets rounded down to 3 */ - ce->min_delta_ns = clockevent_delta2ns(4, ce); - ce->cpumask = cpumask_of(0); - - res = clocksource_register_hz(cs, clock->freq); - if (res) - printk(KERN_ERR "msm_timer_init: clocksource_register " - "failed for %s\n", cs->name); - - ce->irq = clock->irq; - if (cpu_is_msm8x60() || cpu_is_msm8960()) { - clock->percpu_evt = alloc_percpu(struct clock_event_device *); - if (!clock->percpu_evt) { - pr_err("msm_timer_init: memory allocation " - "failed for %s\n", ce->name); - continue; - } - - *__this_cpu_ptr(clock->percpu_evt) = ce; - res = request_percpu_irq(ce->irq, msm_timer_interrupt, - ce->name, clock->percpu_evt); - if (!res) - enable_percpu_irq(ce->irq, 0); - } else { - clock->evt = ce; - res = request_irq(ce->irq, msm_timer_interrupt, - IRQF_TIMER | IRQF_NOBALANCING | IRQF_TRIGGER_RISING, - ce->name, &clock->evt); + writel_relaxed(0, event_base + TIMER_ENABLE); + writel_relaxed(0, event_base + TIMER_CLEAR); + writel_relaxed(~0, event_base + TIMER_MATCH_VAL); + ce->cpumask = cpumask_of(0); + + ce->irq = INT_GP_TIMER_EXP; + clockevents_config_and_register(ce, GPT_HZ, 4, 0xffffffff); + if (cpu_is_msm8x60() || cpu_is_msm8960()) { + msm_evt.percpu_evt = alloc_percpu(struct clock_event_device *); + if (!msm_evt.percpu_evt) { + pr_err("memory allocation failed for %s\n", ce->name); + goto err; } - - if (res) - pr_err("msm_timer_init: request_irq failed for %s\n", - ce->name); - - clockevents_register_device(ce); + *__this_cpu_ptr(msm_evt.percpu_evt) = ce; + res = request_percpu_irq(ce->irq, msm_timer_interrupt, + ce->name, msm_evt.percpu_evt); + if (!res) + enable_percpu_irq(ce->irq, 0); + } else { + msm_evt.evt = ce; + res = request_irq(ce->irq, msm_timer_interrupt, + IRQF_TIMER | IRQF_NOBALANCING | + IRQF_TRIGGER_RISING, ce->name, &msm_evt.evt); } + + if (res) + pr_err("request_irq failed for %s\n", ce->name); +err: + writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE); + res = clocksource_register_hz(cs, dgt_hz); + if (res) + pr_err("clocksource_register failed\n"); } -#ifdef CONFIG_SMP +#ifdef CONFIG_LOCAL_TIMERS int __cpuinit local_timer_setup(struct clock_event_device *evt) { - static bool local_timer_inited; - struct msm_clock *clock = &msm_clocks[MSM_GLOBAL_TIMER]; - /* Use existing clock_event for cpu 0 */ if (!smp_processor_id()) return 0; - writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL); - - if (!local_timer_inited) { - writel(0, clock->regbase + TIMER_ENABLE); - writel(0, clock->regbase + TIMER_CLEAR); - writel(~0, clock->regbase + TIMER_MATCH_VAL); - local_timer_inited = true; - } - evt->irq = clock->irq; + writel_relaxed(0, event_base + TIMER_ENABLE); + writel_relaxed(0, event_base + TIMER_CLEAR); + writel_relaxed(~0, event_base + TIMER_MATCH_VAL); + evt->irq = msm_clockevent.irq; evt->name = "local_timer"; - evt->features = CLOCK_EVT_FEAT_ONESHOT; - evt->rating = clock->clockevent.rating; + evt->features = msm_clockevent.features; + evt->rating = msm_clockevent.rating; evt->set_mode = msm_timer_set_mode; evt->set_next_event = msm_timer_set_next_event; - evt->shift = clock->clockevent.shift; - evt->mult = div_sc(clock->freq, NSEC_PER_SEC, evt->shift); - evt->max_delta_ns = - clockevent_delta2ns(0xf0000000 >> clock->shift, evt); + evt->shift = msm_clockevent.shift; + evt->mult = div_sc(GPT_HZ, NSEC_PER_SEC, evt->shift); + evt->max_delta_ns = clockevent_delta2ns(0xf0000000, evt); evt->min_delta_ns = clockevent_delta2ns(4, evt); - *__this_cpu_ptr(clock->percpu_evt) = evt; - enable_percpu_irq(evt->irq, 0); - + *__this_cpu_ptr(msm_evt.percpu_evt) = evt; clockevents_register_device(evt); + enable_percpu_irq(evt->irq, 0); return 0; } @@ -321,8 +223,7 @@ void local_timer_stop(struct clock_event_device *evt) evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); disable_percpu_irq(evt->irq); } - -#endif +#endif /* CONFIG_LOCAL_TIMERS */ struct sys_timer msm_timer = { .init = msm_timer_init diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 311d5b0e9bc7..62b53d710efd 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -12,12 +12,12 @@ #include <linux/init.h> #include <linux/mbus.h> #include <linux/io.h> +#include <plat/addr-map.h> #include "common.h" /* * Generic Address Decode Windows bit settings */ -#define TARGET_DDR 0 #define TARGET_DEV_BUS 1 #define TARGET_PCIE0 4 #define TARGET_PCIE1 8 @@ -32,23 +32,10 @@ #define ATTR_PCIE_MEM(l) (0xf8 & ~(0x10 << (l))) /* - * Helpers to get DDR bank info - */ -#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) -#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) - -/* * CPU Address Decode Windows registers */ #define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) #define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4)) -#define WIN_CTRL_OFF 0x0000 -#define WIN_BASE_OFF 0x0004 -#define WIN_REMAP_LO_OFF 0x0008 -#define WIN_REMAP_HI_OFF 0x000c - - -struct mbus_dram_target_info mv78xx0_mbus_dram_info; static void __init __iomem *win_cfg_base(int win) { @@ -63,94 +50,43 @@ static void __init __iomem *win_cfg_base(int win) return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win)); } -static int __init cpu_win_can_remap(int win) -{ - if (win < 8) - return 1; - - return 0; -} - -static void __init setup_cpu_win(int win, u32 base, u32 size, - u8 target, u8 attr, int remap) -{ - void __iomem *addr = win_cfg_base(win); - u32 ctrl; - - base &= 0xffff0000; - ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1; - - writel(base, addr + WIN_BASE_OFF); - writel(ctrl, addr + WIN_CTRL_OFF); - if (cpu_win_can_remap(win)) { - if (remap < 0) - remap = base; - - writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF); - writel(0, addr + WIN_REMAP_HI_OFF); - } -} +/* + * Description of the windows needed by the platform code + */ +static struct __initdata orion_addr_map_cfg addr_map_cfg = { + .num_wins = 14, + .remappable_wins = 8, + .win_cfg_base = win_cfg_base, +}; void __init mv78xx0_setup_cpu_mbus(void) { - void __iomem *addr; - int i; - int cs; - /* - * First, disable and clear windows. + * Disable, clear and configure windows. */ - for (i = 0; i < 14; i++) { - addr = win_cfg_base(i); - - writel(0, addr + WIN_BASE_OFF); - writel(0, addr + WIN_CTRL_OFF); - if (cpu_win_can_remap(i)) { - writel(0, addr + WIN_REMAP_LO_OFF); - writel(0, addr + WIN_REMAP_HI_OFF); - } - } + orion_config_wins(&addr_map_cfg, NULL); /* * Setup MBUS dram target info. */ - mv78xx0_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; - if (mv78xx0_core_index() == 0) - addr = (void __iomem *)DDR_WINDOW_CPU0_BASE; + orion_setup_cpu_mbus_target(&addr_map_cfg, + DDR_WINDOW_CPU0_BASE); else - addr = (void __iomem *)DDR_WINDOW_CPU1_BASE; - - for (i = 0, cs = 0; i < 4; i++) { - u32 base = readl(addr + DDR_BASE_CS_OFF(i)); - u32 size = readl(addr + DDR_SIZE_CS_OFF(i)); - - /* - * Chip select enabled? - */ - if (size & 1) { - struct mbus_dram_window *w; - - w = &mv78xx0_mbus_dram_info.cs[cs++]; - w->cs_index = i; - w->mbus_attr = 0xf & ~(1 << i); - w->base = base & 0xffff0000; - w->size = (size | 0x0000ffff) + 1; - } - } - mv78xx0_mbus_dram_info.num_cs = cs; + orion_setup_cpu_mbus_target(&addr_map_cfg, + DDR_WINDOW_CPU1_BASE); } void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size, int maj, int min) { - setup_cpu_win(window, base, size, TARGET_PCIE(maj), - ATTR_PCIE_IO(min), -1); + orion_setup_cpu_win(&addr_map_cfg, window, base, size, + TARGET_PCIE(maj), ATTR_PCIE_IO(min), -1); } void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size, int maj, int min) { - setup_cpu_win(window, base, size, TARGET_PCIE(maj), - ATTR_PCIE_MEM(min), -1); + orion_setup_cpu_win(&addr_map_cfg, window, base, size, + TARGET_PCIE(maj), ATTR_PCIE_MEM(min), -1); } diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c index 0e94268d6e6f..ee74ec97c141 100644 --- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c +++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c @@ -151,4 +151,5 @@ MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL") .init_early = mv78xx0_init_early, .init_irq = mv78xx0_init_irq, .timer = &mv78xx0_timer, + .restart = mv78xx0_restart, MACHINE_END diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 23d3980ef59d..0cdd41004ad0 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/serial_8250.h> -#include <linux/mbus.h> #include <linux/ata_platform.h> #include <linux/ethtool.h> #include <asm/mach/map.h> @@ -23,6 +22,7 @@ #include <plat/orion_nand.h> #include <plat/time.h> #include <plat/common.h> +#include <plat/addr-map.h> #include "common.h" static int get_tclk(void); @@ -169,8 +169,7 @@ void __init mv78xx0_map_io(void) ****************************************************************************/ void __init mv78xx0_ehci0_init(void) { - orion_ehci_init(&mv78xx0_mbus_dram_info, - USB0_PHYS_BASE, IRQ_MV78XX0_USB_0); + orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0); } @@ -179,8 +178,7 @@ void __init mv78xx0_ehci0_init(void) ****************************************************************************/ void __init mv78xx0_ehci1_init(void) { - orion_ehci_1_init(&mv78xx0_mbus_dram_info, - USB1_PHYS_BASE, IRQ_MV78XX0_USB_1); + orion_ehci_1_init(USB1_PHYS_BASE, IRQ_MV78XX0_USB_1); } @@ -189,8 +187,7 @@ void __init mv78xx0_ehci1_init(void) ****************************************************************************/ void __init mv78xx0_ehci2_init(void) { - orion_ehci_2_init(&mv78xx0_mbus_dram_info, - USB2_PHYS_BASE, IRQ_MV78XX0_USB_2); + orion_ehci_2_init(USB2_PHYS_BASE, IRQ_MV78XX0_USB_2); } @@ -199,7 +196,7 @@ void __init mv78xx0_ehci2_init(void) ****************************************************************************/ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) { - orion_ge00_init(eth_data, &mv78xx0_mbus_dram_info, + orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, IRQ_MV78XX0_GE_ERR, get_tclk()); } @@ -210,7 +207,7 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) ****************************************************************************/ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) { - orion_ge01_init(eth_data, &mv78xx0_mbus_dram_info, + orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, NO_IRQ, get_tclk()); } @@ -234,7 +231,7 @@ void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data) eth_data->duplex = DUPLEX_FULL; } - orion_ge10_init(eth_data, &mv78xx0_mbus_dram_info, + orion_ge10_init(eth_data, GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM, NO_IRQ, get_tclk()); } @@ -258,7 +255,7 @@ void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data) eth_data->duplex = DUPLEX_FULL; } - orion_ge11_init(eth_data, &mv78xx0_mbus_dram_info, + orion_ge11_init(eth_data, GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM, NO_IRQ, get_tclk()); } @@ -277,8 +274,7 @@ void __init mv78xx0_i2c_init(void) ****************************************************************************/ void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data) { - orion_sata_init(sata_data, &mv78xx0_mbus_dram_info, - SATA_PHYS_BASE, IRQ_MV78XX0_SATA); + orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_MV78XX0_SATA); } @@ -401,3 +397,19 @@ void __init mv78xx0_init(void) feroceon_l2_init(is_l2_writethrough()); #endif } + +void mv78xx0_restart(char mode, const char *cmd) +{ + /* + * Enable soft reset to assert RSTOUTn. + */ + writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); + + /* + * Assert soft reset. + */ + writel(SOFT_RESET, SYSTEM_SOFT_RESET); + + while (1) + ; +} diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h index 632e63d65e7a..507c767d49e0 100644 --- a/arch/arm/mach-mv78xx0/common.h +++ b/arch/arm/mach-mv78xx0/common.h @@ -23,7 +23,6 @@ void mv78xx0_init(void); void mv78xx0_init_early(void); void mv78xx0_init_irq(void); -extern struct mbus_dram_target_info mv78xx0_mbus_dram_info; void mv78xx0_setup_cpu_mbus(void); void mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size, int maj, int min); @@ -46,6 +45,7 @@ void mv78xx0_uart1_init(void); void mv78xx0_uart2_init(void); void mv78xx0_uart3_init(void); void mv78xx0_i2c_init(void); +void mv78xx0_restart(char, const char *); extern struct sys_timer mv78xx0_timer; diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c index 50b85ae2da52..4d6d48bf51ef 100644 --- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c +++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c @@ -99,4 +99,5 @@ MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board") .init_early = mv78xx0_init_early, .init_irq = mv78xx0_init_irq, .timer = &mv78xx0_timer, + .restart = mv78xx0_restart, MACHINE_END diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h index 66e7ce4e90bd..8c3a5387cec7 100644 --- a/arch/arm/mach-mv78xx0/include/mach/system.h +++ b/arch/arm/mach-mv78xx0/include/mach/system.h @@ -9,28 +9,9 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <mach/bridge-regs.h> - static inline void arch_idle(void) { cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ - /* - * Enable soft reset to assert RSTOUTn. - */ - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); - - /* - * Assert soft reset. - */ - writel(SOFT_RESET, SYSTEM_SOFT_RESET); - - while (1) - ; -} - - #endif diff --git a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h deleted file mode 100644 index ba26fe98e640..000000000000 --- a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/include/mach/vmalloc.h - */ - -#define VMALLOC_END 0xfe000000UL diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c index cf4e494d44bf..df50342179e2 100644 --- a/arch/arm/mach-mv78xx0/mpp.c +++ b/arch/arm/mach-mv78xx0/mpp.c @@ -10,7 +10,6 @@ #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> -#include <linux/mbus.h> #include <linux/io.h> #include <plat/mpp.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index c51af1cac300..8459f6d7d8ca 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -10,11 +10,11 @@ #include <linux/kernel.h> #include <linux/pci.h> -#include <linux/mbus.h> #include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> #include <plat/pcie.h> +#include <plat/addr-map.h> #include "common.h" struct pcie_port { @@ -153,11 +153,10 @@ static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys) * Generic PCIe unit setup. */ orion_pcie_set_local_bus_nr(pp->base, sys->busnr); - orion_pcie_setup(pp->base, &mv78xx0_mbus_dram_info); + orion_pcie_setup(pp->base); - sys->resource[0] = &pp->res[0]; - sys->resource[1] = &pp->res[1]; - sys->resource[2] = NULL; + pci_add_resource(&sys->resources, &pp->res[0]); + pci_add_resource(&sys->resources, &pp->res[1]); return 1; } @@ -251,7 +250,8 @@ mv78xx0_pcie_scan_bus(int nr, struct pci_sys_data *sys) struct pci_bus *bus; if (nr < num_pcie_ports) { - bus = pci_scan_bus(sys->busnr, &pcie_ops, sys); + bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys, + &sys->resources); } else { bus = NULL; BUG(); diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c index e85222e53578..9a882706e138 100644 --- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c +++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c @@ -84,4 +84,5 @@ MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board") .init_early = mv78xx0_init_early, .init_irq = mv78xx0_init_irq, .timer = &mv78xx0_timer, + .restart = mv78xx0_restart, MACHINE_END diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 1fc110348040..944025da8333 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -297,4 +297,5 @@ MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module") .handle_irq = imx51_handle_irq, .timer = &mxc_timer, .init_machine = eukrea_cpuimx51_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c index 52a11c1898e6..9fbe923c8b08 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -335,4 +335,5 @@ MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD") .handle_irq = imx51_handle_irq, .timer = &mxc_timer, .init_machine = eukrea_cpuimx51sd_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c index fc3621d90bde..42b66e8d9615 100644 --- a/arch/arm/mach-mx5/board-mx50_rdp.c +++ b/arch/arm/mach-mx5/board-mx50_rdp.c @@ -222,4 +222,5 @@ MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform") .handle_irq = imx50_handle_irq, .timer = &mx50_rdp_timer, .init_machine = mx50_rdp_board_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index 05783906db2b..83eab4176ca4 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -175,4 +175,5 @@ MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board") .handle_irq = imx51_handle_irq, .timer = &mx51_3ds_timer, .init_machine = mx51_3ds_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 5c837603ff0f..e4b822e9f719 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -362,7 +362,7 @@ static void __init mx51_babbage_init(void) { iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21, - PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP); + PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH); imx51_soc_init(); @@ -426,4 +426,5 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") .handle_irq = imx51_handle_irq, .timer = &mx51_babbage_timer, .init_machine = mx51_babbage_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index a9e48662cf75..3a5ed2dd885a 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -182,7 +182,7 @@ static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initcon .nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey), }; -void mx51_efikamx_reset(void) +static void mx51_efikamx_restart(char mode, const char *cmd) { if (system_rev == 0x11) gpio_direction_output(EFIKAMX_RESET1_1, 0); @@ -292,4 +292,5 @@ MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop") .handle_irq = imx51_handle_irq, .timer = &mx51_efikamx_timer, .init_machine = mx51_efikamx_init, + .restart = mx51_efikamx_restart, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c index 38c4a3e28d3c..ea5f65b0381a 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-mx5/board-mx51_efikasb.c @@ -287,4 +287,5 @@ MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook") .handle_irq = imx51_handle_irq, .init_machine = efikasb_board_init, .timer = &mx51_efikasb_timer, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c index 0d7f0fffb23a..5f224f1c3eb6 100644 --- a/arch/arm/mach-mx5/board-mx53_ard.c +++ b/arch/arm/mach-mx5/board-mx53_ard.c @@ -257,4 +257,5 @@ MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board") .handle_irq = imx53_handle_irq, .timer = &mx53_ard_timer, .init_machine = mx53_ard_board_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index 6bea31ab8f85..d6ce137896d6 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -106,7 +106,7 @@ static inline void mx53_evk_fec_reset(void) gpio_set_value(MX53_EVK_FEC_PHY_RST, 1); } -static struct fec_platform_data mx53_evk_fec_pdata = { +static const struct fec_platform_data mx53_evk_fec_pdata __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; @@ -175,4 +175,5 @@ MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board") .handle_irq = imx53_handle_irq, .timer = &mx53_evk_timer, .init_machine = mx53_evk_board_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 7678f7734db6..fd8b524e1c58 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -242,7 +242,7 @@ static inline void mx53_loco_fec_reset(void) gpio_set_value(LOCO_FEC_PHY_RST, 1); } -static struct fec_platform_data mx53_loco_fec_data = { +static const struct fec_platform_data mx53_loco_fec_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; @@ -317,4 +317,5 @@ MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board") .handle_irq = imx53_handle_irq, .timer = &mx53_loco_timer, .init_machine = mx53_loco_board_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index 59c0845eb4a6..22c53c9b18aa 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -104,7 +104,7 @@ static inline void mx53_smd_fec_reset(void) gpio_set_value(SMD_FEC_PHY_RST, 1); } -static struct fec_platform_data mx53_smd_fec_data = { +static const struct fec_platform_data mx53_smd_fec_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; @@ -164,4 +164,5 @@ MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board") .handle_irq = imx53_handle_irq, .timer = &mx53_smd_timer, .init_machine = mx53_smd_board_init, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c index ccc61585659b..e6bad17b908c 100644 --- a/arch/arm/mach-mx5/imx51-dt.c +++ b/arch/arm/mach-mx5/imx51-dt.c @@ -44,20 +44,22 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static void __init imx51_tzic_add_irq_domain(struct device_node *np, +static int __init imx51_tzic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { irq_domain_add_simple(np, 0); + return 0; } -static void __init imx51_gpio_add_irq_domain(struct device_node *np, +static int __init imx51_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 4; /* imx51 gets 4 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx51_irq_match[] __initconst = { @@ -113,4 +115,5 @@ DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)") .timer = &imx51_timer, .init_machine = imx51_dt_init, .dt_compat = imx51_dt_board_compat, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c index ccaa0b81b768..05ebb3e68679 100644 --- a/arch/arm/mach-mx5/imx53-dt.c +++ b/arch/arm/mach-mx5/imx53-dt.c @@ -48,20 +48,22 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static void __init imx53_tzic_add_irq_domain(struct device_node *np, +static int __init imx53_tzic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { irq_domain_add_simple(np, 0); + return 0; } -static void __init imx53_gpio_add_irq_domain(struct device_node *np, +static int __init imx53_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 7; /* imx53 gets 7 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx53_irq_match[] __initconst = { @@ -123,4 +125,5 @@ DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)") .timer = &imx53_timer, .init_machine = imx53_dt_init, .dt_compat = imx53_dt_board_compat, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index df4a508f240a..bc17dfea3817 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -13,6 +13,7 @@ #include <linux/mm.h> #include <linux/init.h> +#include <linux/clk.h> #include <asm/mach/map.h> @@ -21,10 +22,26 @@ #include <mach/devices-common.h> #include <mach/iomux-v3.h> +static struct clk *gpc_dvfs_clk; + static void imx5_idle(void) { - if (!need_resched()) + if (!need_resched()) { + /* gpc clock is needed for SRPG */ + if (gpc_dvfs_clk == NULL) { + gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); + if (IS_ERR(gpc_dvfs_clk)) + goto err0; + } + clk_enable(gpc_dvfs_clk); mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + if (tzic_enable_wake()) + goto err1; + cpu_do_idle(); +err1: + clk_disable(gpc_dvfs_clk); + } +err0: local_irq_enable(); } diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-mx5/system.c index 144ebebc4a61..5eebfaad1226 100644 --- a/arch/arm/mach-mx5/system.c +++ b/arch/arm/mach-mx5/system.c @@ -55,9 +55,6 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) stop_mode = 1; } arm_srpgcr |= MXC_SRPGCR_PCR; - - if (tzic_enable_wake(1) != 0) - return; break; case STOP_POWER_ON: ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET; diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index 0163b6d83773..e12e11231dc7 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -545,11 +545,11 @@ int __init mx23_clocks_init(void) */ clk_set_parent(&ssp_clk, &ref_io_clk); - clk_enable(&cpu_clk); - clk_enable(&hbus_clk); - clk_enable(&xbus_clk); - clk_enable(&emi_clk); - clk_enable(&uart_clk); + clk_prepare_enable(&cpu_clk); + clk_prepare_enable(&hbus_clk); + clk_prepare_enable(&xbus_clk); + clk_prepare_enable(&emi_clk); + clk_prepare_enable(&uart_clk); clkdev_add_table(lookups, ARRAY_SIZE(lookups)); diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index da6e4aad177c..5d68e4152220 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -22,6 +22,7 @@ #include <linux/io.h> #include <linux/jiffies.h> #include <linux/clkdev.h> +#include <linux/spinlock.h> #include <asm/clkdev.h> #include <asm/div64.h> @@ -29,6 +30,7 @@ #include <mach/mx28.h> #include <mach/common.h> #include <mach/clock.h> +#include <mach/digctl.h> #include "regs-clkctrl-mx28.h" @@ -43,6 +45,33 @@ static struct clk emi_clk; static struct clk saif0_clk; static struct clk saif1_clk; static struct clk clk32k_clk; +static DEFINE_SPINLOCK(clkmux_lock); + +/* + * HW_SAIF_CLKMUX_SEL: + * DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1 + * clock pins selected for SAIF1 input clocks. + * CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and + * SAIF0 clock inputs selected for SAIF1 input clocks. + * EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input + * clocks. + * EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input + * clocks. + */ +int mxs_saif_clkmux_select(unsigned int clkmux) +{ + if (clkmux > 0x3) + return -EINVAL; + + spin_lock(&clkmux_lock); + __raw_writel(BM_DIGCTL_CTRL_SAIF_CLKMUX, + DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_CLR_ADDR); + __raw_writel(clkmux << BP_DIGCTL_CTRL_SAIF_CLKMUX, + DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_SET_ADDR); + spin_unlock(&clkmux_lock); + + return 0; +} static int _raw_clk_enable(struct clk *clk) { @@ -775,16 +804,25 @@ int __init mx28_clocks_init(void) clk_set_parent(&ssp0_clk, &ref_io0_clk); clk_set_parent(&ssp1_clk, &ref_io0_clk); - clk_enable(&cpu_clk); - clk_enable(&hbus_clk); - clk_enable(&xbus_clk); - clk_enable(&emi_clk); - clk_enable(&uart_clk); + clk_prepare_enable(&cpu_clk); + clk_prepare_enable(&hbus_clk); + clk_prepare_enable(&xbus_clk); + clk_prepare_enable(&emi_clk); + clk_prepare_enable(&uart_clk); clk_set_parent(&lcdif_clk, &ref_pix_clk); clk_set_parent(&saif0_clk, &pll0_clk); clk_set_parent(&saif1_clk, &pll0_clk); + /* + * Set an initial clock rate for the saif internal logic to work + * properly. This is important when working in EXTMASTER mode that + * uses the other saif's BITCLK&LRCLK but it still needs a basic + * clock which should be fast enough for the internal logic. + */ + clk_set_rate(&saif0_clk, 24000000); + clk_set_rate(&saif1_clk, 24000000); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); mxs_timer_init(&clk32k_clk, MX28_INT_TIMER0); diff --git a/arch/arm/mach-mxs/clock.c b/arch/arm/mach-mxs/clock.c index a7093c88e6a6..97a6f4acc6cc 100644 --- a/arch/arm/mach-mxs/clock.c +++ b/arch/arm/mach-mxs/clock.c @@ -74,10 +74,15 @@ static int __clk_enable(struct clk *clk) return 0; } -/* This function increments the reference count on the clock and enables the - * clock if not already enabled. The parent clock tree is recursively enabled +/* + * The clk_enable/clk_disable could be called by drivers in atomic context, + * so they should not really hold mutex. Instead, clk_prepare/clk_unprepare + * can hold a mutex, as the pair will only be called in non-atomic context. + * Before migrating to common clk framework, we can have __clk_enable and + * __clk_disable called in clk_prepare/clk_unprepare with mutex held and + * leave clk_enable/clk_disable as the dummy functions. */ -int clk_enable(struct clk *clk) +int clk_prepare(struct clk *clk) { int ret = 0; @@ -90,13 +95,9 @@ int clk_enable(struct clk *clk) return ret; } -EXPORT_SYMBOL(clk_enable); +EXPORT_SYMBOL(clk_prepare); -/* This function decrements the reference count on the clock and disables - * the clock when reference count is 0. The parent clock tree is - * recursively disabled - */ -void clk_disable(struct clk *clk) +void clk_unprepare(struct clk *clk) { if (clk == NULL || IS_ERR(clk)) return; @@ -105,6 +106,18 @@ void clk_disable(struct clk *clk) __clk_disable(clk); mutex_unlock(&clocks_mutex); } +EXPORT_SYMBOL(clk_unprepare); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + /* nothing to do */ +} EXPORT_SYMBOL(clk_disable); /* Retrieve the *current* clock rate. If the clock itself @@ -166,7 +179,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent) return ret; if (clk->usecount) - clk_enable(parent); + clk_prepare_enable(parent); mutex_lock(&clocks_mutex); ret = clk->set_parent(clk, parent); diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index c8887103f0e3..4f50094e293d 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -47,6 +47,7 @@ struct platform_device *__init mx28_add_mxsfb( const struct mxsfb_platform_data *pdata); extern const struct mxs_saif_data mx28_saif_data[] __initconst; -#define mx28_add_saif(id) mxs_add_saif(&mx28_saif_data[id]) +#define mx28_add_saif(id, pdata) \ + mxs_add_saif(&mx28_saif_data[id], pdata) struct platform_device *__init mx28_add_rtc_stmp3xxx(void); diff --git a/arch/arm/mach-mxs/devices/platform-mxs-saif.c b/arch/arm/mach-mxs/devices/platform-mxs-saif.c index 1ec965e9fe92..f6e3a60b4201 100644 --- a/arch/arm/mach-mxs/devices/platform-mxs-saif.c +++ b/arch/arm/mach-mxs/devices/platform-mxs-saif.c @@ -32,7 +32,8 @@ const struct mxs_saif_data mx28_saif_data[] __initconst = { }; #endif -struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data) +struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data, + const struct mxs_saif_platform_data *pdata) { struct resource res[] = { { @@ -56,5 +57,5 @@ struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data) }; return mxs_add_platform_device("mxs-saif", data->id, res, - ARRAY_SIZE(res), NULL, 0); + ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h index 635bb5d9a20a..e1237ab25862 100644 --- a/arch/arm/mach-mxs/include/mach/common.h +++ b/arch/arm/mach-mxs/include/mach/common.h @@ -16,6 +16,8 @@ struct clk; extern const u32 *mxs_get_ocotp(void); extern int mxs_reset_block(void __iomem *); extern void mxs_timer_init(struct clk *, int); +extern void mxs_restart(char, const char *); +extern int mxs_saif_clkmux_select(unsigned int clkmux); extern int mx23_register_gpios(void); extern int mx23_clocks_init(void); diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index a8080f44c03d..dc369c1239fc 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -94,6 +94,7 @@ struct platform_device *__init mxs_add_mxs_pwm( resource_size_t iobase, int id); /* saif */ +#include <sound/saif.h> struct mxs_saif_data { int id; resource_size_t iobase; @@ -103,4 +104,5 @@ struct mxs_saif_data { }; struct platform_device *__init mxs_add_saif( - const struct mxs_saif_data *data); + const struct mxs_saif_data *data, + const struct mxs_saif_platform_data *pdata); diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h new file mode 100644 index 000000000000..49a888c65d6d --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/digctl.h @@ -0,0 +1,21 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_DIGCTL_H__ +#define __MACH_DIGCTL_H__ + +/* MXS DIGCTL SAIF CLKMUX */ +#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0 +#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1 +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2 +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3 + +#define HW_DIGCTL_CTRL 0x0 +#define BP_DIGCTL_CTRL_SAIF_CLKMUX 10 +#define BM_DIGCTL_CTRL_SAIF_CLKMUX (0x3 << 10) +#endif diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h index 75d86118b76a..30c7990f3c01 100644 --- a/arch/arm/mach-mxs/include/mach/mx28.h +++ b/arch/arm/mach-mxs/include/mach/mx28.h @@ -104,8 +104,8 @@ #define MX28_INT_CAN1 9 #define MX28_INT_LRADC_TOUCH 10 #define MX28_INT_HSADC 13 -#define MX28_INT_IRADC_THRESH0 14 -#define MX28_INT_IRADC_THRESH1 15 +#define MX28_INT_LRADC_THRESH0 14 +#define MX28_INT_LRADC_THRESH1 15 #define MX28_INT_LRADC_CH0 16 #define MX28_INT_LRADC_CH1 17 #define MX28_INT_LRADC_CH2 18 diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h index 0d2d2b470998..bde5f6634747 100644 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ b/arch/arm/mach-mxs/include/mach/mxs.h @@ -30,6 +30,7 @@ */ #define cpu_is_mx23() ( \ machine_is_mx23evk() || \ + machine_is_stmp378x() || \ 0) #define cpu_is_mx28() ( \ machine_is_mx28evk() || \ diff --git a/arch/arm/mach-mxs/include/mach/system.h b/arch/arm/mach-mxs/include/mach/system.h index 0e428239b433..e7ad1bb29423 100644 --- a/arch/arm/mach-mxs/include/mach/system.h +++ b/arch/arm/mach-mxs/include/mach/system.h @@ -22,6 +22,4 @@ static inline void arch_idle(void) cpu_do_idle(); } -void arch_reset(char mode, const char *cmd); - #endif /* __MACH_MXS_SYSTEM_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/vmalloc.h b/arch/arm/mach-mxs/include/mach/vmalloc.h deleted file mode 100644 index 103b0165ed0b..000000000000 --- a/arch/arm/mach-mxs/include/mach/vmalloc.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2000 Russell King. - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_MXS_VMALLOC_H__ -#define __MACH_MXS_VMALLOC_H__ - -/* vmalloc ending address */ -#define VMALLOC_END 0xf4000000UL - -#endif /* __MACH_MXS_VMALLOC_H__ */ diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c index 3b1681e4f49a..2f2758230edf 100644 --- a/arch/arm/mach-mxs/mach-m28evk.c +++ b/arch/arm/mach-mxs/mach-m28evk.c @@ -361,6 +361,7 @@ static struct sys_timer m28evk_timer = { MACHINE_START(M28EVK, "DENX M28 EVK") .map_io = mx28_map_io, .init_irq = mx28_init_irq, - .init_machine = m28evk_init, .timer = &m28evk_timer, + .init_machine = m28evk_init, + .restart = mxs_restart, MACHINE_END diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c index c325fbe4e4c6..5ea1c57d2606 100644 --- a/arch/arm/mach-mxs/mach-mx23evk.c +++ b/arch/arm/mach-mxs/mach-mx23evk.c @@ -184,4 +184,5 @@ MACHINE_START(MX23EVK, "Freescale MX23 EVK") .init_irq = mx23_init_irq, .timer = &mx23evk_timer, .init_machine = mx23evk_init, + .restart = mxs_restart, MACHINE_END diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index 064ec5abaa55..fdb0a5664dd6 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -27,6 +27,7 @@ #include <mach/common.h> #include <mach/iomux-mx28.h> +#include <mach/digctl.h> #include "devices-mx28.h" @@ -228,7 +229,7 @@ static void __init mx28evk_fec_reset(void) /* Enable fec phy clock */ clk = clk_get_sys("pll2", NULL); if (!IS_ERR(clk)) - clk_enable(clk); + clk_prepare_enable(clk); /* Power up fec phy */ ret = gpio_request(MX28EVK_FEC_PHY_POWER, "fec-phy-power"); @@ -421,6 +422,18 @@ static struct gpio mx28evk_lcd_gpios[] = { { MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" }, }; +static const struct mxs_saif_platform_data + mx28evk_mxs_saif_pdata[] __initconst = { + /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */ + { + .master_mode = 1, + .master_id = 0, + }, { + .master_mode = 0, + .master_id = 0, + }, +}; + static void __init mx28evk_init(void) { int ret; @@ -454,8 +467,9 @@ static void __init mx28evk_init(void) else mx28_add_mxsfb(&mx28evk_mxsfb_pdata); - mx28_add_saif(0); - mx28_add_saif(1); + mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); + mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]); + mx28_add_saif(1, &mx28evk_mxs_saif_pdata[1]); mx28_add_mxs_i2c(0); i2c_register_board_info(0, mxs_i2c0_board_info, @@ -501,4 +515,5 @@ MACHINE_START(MX28EVK, "Freescale MX28 EVK") .init_irq = mx28_init_irq, .timer = &mx28evk_timer, .init_machine = mx28evk_init, + .restart = mxs_restart, MACHINE_END diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c index 177e53123a02..a626c07b8713 100644 --- a/arch/arm/mach-mxs/mach-stmp378x_devb.c +++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c @@ -115,6 +115,7 @@ static struct sys_timer stmp378x_dvb_timer = { MACHINE_START(STMP378X, "STMP378X") .map_io = mx23_map_io, .init_irq = mx23_init_irq, - .init_machine = stmp378x_dvb_init, .timer = &stmp378x_dvb_timer, + .init_machine = stmp378x_dvb_init, + .restart = mxs_restart, MACHINE_END diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c index 9a1f0e7a338e..2c0862e655ee 100644 --- a/arch/arm/mach-mxs/mach-tx28.c +++ b/arch/arm/mach-mxs/mach-tx28.c @@ -178,4 +178,5 @@ MACHINE_START(TX28, "Ka-Ro electronics TX28 module") .init_irq = mx28_init_irq, .timer = &tx28_timer, .init_machine = tx28_stk5v3_init, + .restart = mxs_restart, MACHINE_END diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c index 0fcff47009cf..9a7b08b2a925 100644 --- a/arch/arm/mach-mxs/module-tx28.c +++ b/arch/arm/mach-mxs/module-tx28.c @@ -66,11 +66,11 @@ static const iomux_cfg_t tx28_fec1_pads[] __initconst = { MX28_PAD_ENET0_CRS__ENET1_RX_EN, }; -static struct fec_platform_data tx28_fec0_data = { +static const struct fec_platform_data tx28_fec0_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; -static struct fec_platform_data tx28_fec1_data = { +static const struct fec_platform_data tx28_fec1_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c index 20ec3bddf7cd..54f91ad1c965 100644 --- a/arch/arm/mach-mxs/system.c +++ b/arch/arm/mach-mxs/system.c @@ -42,7 +42,7 @@ static void __iomem *mxs_clkctrl_reset_addr; /* * Reset the system. It is called by machine_restart(). */ -void arch_reset(char mode, const char *cmd) +void mxs_restart(char mode, const char *cmd) { /* reset the chip */ __mxs_setl(MXS_CLKCTRL_RESET_CHIP, mxs_clkctrl_reset_addr); @@ -53,7 +53,7 @@ void arch_reset(char mode, const char *cmd) mdelay(50); /* We'll take a jump through zero as a poor second */ - cpu_reset(0); + soft_restart(0); } static int __init mxs_arch_reset_init(void) @@ -66,7 +66,7 @@ static int __init mxs_arch_reset_init(void) clk = clk_get_sys("rtc", NULL); if (!IS_ERR(clk)) - clk_enable(clk); + clk_prepare_enable(clk); return 0; } diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c index cace0d2e5a55..564a63279f18 100644 --- a/arch/arm/mach-mxs/timer.c +++ b/arch/arm/mach-mxs/timer.c @@ -245,7 +245,7 @@ static int __init mxs_clocksource_init(struct clk *timer_clk) void __init mxs_timer_init(struct clk *timer_clk, int irq) { - clk_enable(timer_clk); + clk_prepare_enable(timer_clk); /* * Initialize timers to a known state diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c index 00023b5cf12b..59e67979f197 100644 --- a/arch/arm/mach-netx/generic.c +++ b/arch/arm/mach-netx/generic.c @@ -187,3 +187,8 @@ static int __init netx_init(void) subsys_initcall(netx_init); +void netx_restart(char mode, const char *cmd) +{ + writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES, + NETX_SYSTEM_RES_CR); +} diff --git a/arch/arm/mach-netx/generic.h b/arch/arm/mach-netx/generic.h index ede2d35341c3..9b915119b8d6 100644 --- a/arch/arm/mach-netx/generic.h +++ b/arch/arm/mach-netx/generic.h @@ -19,6 +19,7 @@ extern void __init netx_map_io(void); extern void __init netx_init_irq(void); +extern void netx_restart(char, const char *); struct sys_timer; extern struct sys_timer netx_timer; diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S index 844f1f9acbdf..6e9f1cbe1634 100644 --- a/arch/arm/mach-netx/include/mach/entry-macro.S +++ b/arch/arm/mach-netx/include/mach/entry-macro.S @@ -18,22 +18,9 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <mach/hardware.h> .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - ldr \base, =io_p2v(0x001ff000) - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #0] - clz \irqnr, \irqstat - rsb \irqnr, \irqnr, #31 - cmp \irqstat, #0 - .endm - diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h index dc7b4bc003c5..b38fa36d58c4 100644 --- a/arch/arm/mach-netx/include/mach/system.h +++ b/arch/arm/mach-netx/include/mach/system.h @@ -19,20 +19,10 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <linux/io.h> -#include <mach/hardware.h> -#include "netx-regs.h" - static inline void arch_idle(void) { cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ - writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES, - NETX_SYSTEM_RES_CR); -} - #endif diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c index 90903dd44cbc..180ea899a48a 100644 --- a/arch/arm/mach-netx/nxdb500.c +++ b/arch/arm/mach-netx/nxdb500.c @@ -28,6 +28,7 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/hardware/vic.h> #include <mach/netx-regs.h> #include <mach/eth.h> @@ -203,6 +204,8 @@ MACHINE_START(NXDB500, "Hilscher nxdb500") .atag_offset = 0x100, .map_io = netx_map_io, .init_irq = netx_init_irq, + .handle_irq = vic_handle_irq, .timer = &netx_timer, .init_machine = nxdb500_init, + .restart = netx_restart, MACHINE_END diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c index c63384aba500..58009e29b20e 100644 --- a/arch/arm/mach-netx/nxdkn.c +++ b/arch/arm/mach-netx/nxdkn.c @@ -28,6 +28,7 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/hardware/vic.h> #include <mach/netx-regs.h> #include <mach/eth.h> @@ -96,6 +97,8 @@ MACHINE_START(NXDKN, "Hilscher nxdkn") .atag_offset = 0x100, .map_io = netx_map_io, .init_irq = netx_init_irq, + .handle_irq = vic_handle_irq, .timer = &netx_timer, .init_machine = nxdkn_init, + .restart = netx_restart, MACHINE_END diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c index 8f548ec83ad2..122e99826ef6 100644 --- a/arch/arm/mach-netx/nxeb500hmi.c +++ b/arch/arm/mach-netx/nxeb500hmi.c @@ -28,6 +28,7 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/hardware/vic.h> #include <mach/netx-regs.h> #include <mach/eth.h> @@ -180,6 +181,8 @@ MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi") .atag_offset = 0x100, .map_io = netx_map_io, .init_irq = netx_init_irq, + .handle_irq = vic_handle_irq, .timer = &netx_timer, .init_machine = nxeb500hmi_init, + .restart = netx_restart, MACHINE_END diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 0cbb74c96ef7..7c878bf00340 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -21,6 +21,7 @@ #include <linux/mtd/onenand.h> #include <linux/mtd/partitions.h> #include <linux/io.h> +#include <asm/hardware/vic.h> #include <asm/sizes.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -34,6 +35,8 @@ #include <mach/nand.h> #include <mach/fsmc.h> +#include "cpu-8815.h" + /* Initial value for SRC control register: all timers use MXTAL/8 source */ #define SRC_CR_INIT_MASK 0x00007fff #define SRC_CR_INIT_VAL 0x2aaa8000 @@ -280,6 +283,8 @@ MACHINE_START(NOMADIK, "NHK8815") .atag_offset = 0x100, .map_io = cpu8815_map_io, .init_irq = cpu8815_init_irq, + .handle_irq = vic_handle_irq, .timer = &nomadik_timer, .init_machine = nhk8815_platform_init, + .restart = cpu8815_restart, MACHINE_END diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index dc67717db6f0..65df7b4fdd3e 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -21,6 +21,7 @@ #include <linux/device.h> #include <linux/amba/bus.h> #include <linux/platform_device.h> +#include <linux/io.h> #include <plat/gpio-nomadik.h> #include <mach/hardware.h> @@ -32,6 +33,7 @@ #include <asm/hardware/cache-l2x0.h> #include "clock.h" +#include "cpu-8815.h" #define __MEM_4K_RESOURCE(x) \ .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} @@ -164,3 +166,13 @@ void __init cpu8815_init_irq(void) #endif return; } + +void cpu8815_restart(char mode, const char *cmd) +{ + void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18); + + /* FIXME: use egpio when implemented */ + + /* Write anything to Reset status register */ + writel(1, src_rstsr); +} diff --git a/arch/arm/mach-nomadik/cpu-8815.h b/arch/arm/mach-nomadik/cpu-8815.h new file mode 100644 index 000000000000..71c21e8a11dc --- /dev/null +++ b/arch/arm/mach-nomadik/cpu-8815.h @@ -0,0 +1,4 @@ +extern void cpu8815_map_io(void); +extern void cpu8815_platform_init(void); +extern void cpu8815_init_irq(void); +extern void cpu8815_restart(char, const char *); diff --git a/arch/arm/mach-nomadik/include/mach/entry-macro.S b/arch/arm/mach-nomadik/include/mach/entry-macro.S index 49f1aa3bb420..98ea1c1fbbab 100644 --- a/arch/arm/mach-nomadik/include/mach/entry-macro.S +++ b/arch/arm/mach-nomadik/include/mach/entry-macro.S @@ -6,38 +6,8 @@ * warranty of any kind, whether express or implied. */ -#include <mach/hardware.h> -#include <mach/irqs.h> - .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - ldr \base, =IO_ADDRESS(NOMADIK_IC_BASE) - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - /* This stanza gets the irq mask from one of two status registers */ - mov \irqnr, #0 - ldr \irqstat, [\base, #VIC_REG_IRQSR0] @ get masked status - cmp \irqstat, #0 - bne 1001f - add \irqnr, \irqnr, #32 - ldr \irqstat, [\base, #VIC_REG_IRQSR1] @ get masked status - -1001: tst \irqstat, #15 - bne 1002f - add \irqnr, \irqnr, #4 - movs \irqstat, \irqstat, lsr #4 - bne 1001b -1002: tst \irqstat, #1 - bne 1003f - add \irqnr, \irqnr, #1 - movs \irqstat, \irqstat, lsr #1 - bne 1002b -1003: /* EQ will be set if no irqs pending */ - .endm diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h index b7897edf1f35..bcaeaf41c053 100644 --- a/arch/arm/mach-nomadik/include/mach/setup.h +++ b/arch/arm/mach-nomadik/include/mach/setup.h @@ -12,9 +12,6 @@ #ifdef CONFIG_NOMADIK_8815 -extern void cpu8815_map_io(void); -extern void cpu8815_platform_init(void); -extern void cpu8815_init_irq(void); extern void nmdk_timer_init(void); #endif /* NOMADIK_8815 */ diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h index 7119f688116e..25e198b8976c 100644 --- a/arch/arm/mach-nomadik/include/mach/system.h +++ b/arch/arm/mach-nomadik/include/mach/system.h @@ -20,9 +20,6 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <linux/io.h> -#include <mach/hardware.h> - static inline void arch_idle(void) { /* @@ -32,14 +29,4 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ - void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18); - - /* FIXME: use egpio when implemented */ - - /* Write anything to Reset status register */ - writel(1, src_rstsr); -} - #endif diff --git a/arch/arm/mach-nomadik/include/mach/vmalloc.h b/arch/arm/mach-nomadik/include/mach/vmalloc.h deleted file mode 100644 index f83d574d9445..000000000000 --- a/arch/arm/mach-nomadik/include/mach/vmalloc.h +++ /dev/null @@ -1,2 +0,0 @@ - -#define VMALLOC_END 0xe8000000UL diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 73f287d6429b..4f8d66f044e7 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -168,70 +168,6 @@ config MACH_OMAP_GENERIC custom OMAP boards. Say Y here if you have a custom board. -comment "OMAP CPU Speed" - depends on ARCH_OMAP1 - -config OMAP_ARM_216MHZ - bool "OMAP ARM 216 MHz CPU (1710 only)" - depends on ARCH_OMAP1 && ARCH_OMAP16XX - help - Enable 216 MHz clock for OMAP1710 CPU. If unsure, say N. - -config OMAP_ARM_195MHZ - bool "OMAP ARM 195 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850) - help - Enable 195MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_192MHZ - bool "OMAP ARM 192 MHz CPU" - depends on ARCH_OMAP1 && ARCH_OMAP16XX - help - Enable 192MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_182MHZ - bool "OMAP ARM 182 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850) - help - Enable 182MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_168MHZ - bool "OMAP ARM 168 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) - help - Enable 168MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_150MHZ - bool "OMAP ARM 150 MHz CPU" - depends on ARCH_OMAP1 && ARCH_OMAP15XX - help - Enable 150MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_120MHZ - bool "OMAP ARM 120 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) - help - Enable 120MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_96MHZ - bool "OMAP ARM 96 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) - help - Enable 96MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_60MHZ - bool "OMAP ARM 60 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) - default y - help - Enable 60MHz clock for OMAP CPU. If unsure, say Y. - -config OMAP_ARM_30MHZ - bool "OMAP ARM 30 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) - help - Enable 30MHz clock for OMAP CPU. If unsure, say N. - endmenu endif diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index b0f15d234a12..88909cc0b254 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -35,7 +35,7 @@ #include <plat/mux.h> #include <plat/usb.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <mach/camera.h> #include <mach/ams-delta-fiq.h> @@ -386,6 +386,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .init_irq = omap1_init_irq, .init_machine = ams_delta_init, .timer = &omap1_timer, + .restart = omap1_restart, MACHINE_END EXPORT_SYMBOL(ams_delta_latch1_write); diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 23178275f96b..0b9464b41212 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -32,7 +32,7 @@ #include <plat/flash.h> #include <plat/fpga.h> #include <plat/keypad.h> -#include <plat/common.h> +#include "common.h" #include <plat/board.h> /* fsample is pretty close to p2-sample */ @@ -390,4 +390,5 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") .init_irq = omap1_init_irq, .init_machine = omap_fsample_init, .timer = &omap1_timer, + .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index dc5b75de531c..9a5fe581bc1c 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -25,7 +25,7 @@ #include <plat/mux.h> #include <plat/usb.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" /* assume no Mini-AB port */ @@ -89,4 +89,5 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") .init_irq = omap1_init_irq, .init_machine = omap_generic_init, .timer = &omap1_timer, + .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index b334b1481678..00ad6b22d60a 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -43,7 +43,7 @@ #include <plat/irda.h> #include <plat/usb.h> #include <plat/keypad.h> -#include <plat/common.h> +#include "common.h" #include <plat/flash.h> #include "board-h2.h" @@ -456,4 +456,5 @@ MACHINE_START(OMAP_H2, "TI-H2") .init_irq = omap1_init_irq, .init_machine = h2_init, .timer = &omap1_timer, + .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 74ebe72c9848..4a7f25149703 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -45,7 +45,7 @@ #include <plat/usb.h> #include <plat/keypad.h> #include <plat/dma.h> -#include <plat/common.h> +#include "common.h" #include <plat/flash.h> #include "board-h3.h" @@ -444,4 +444,5 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") .init_irq = omap1_init_irq, .init_machine = h3_init, .timer = &omap1_timer, + .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 3e91baab1a89..731cc3db7ab3 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -41,7 +41,7 @@ #include <asm/mach/arch.h> #include <plat/omap7xx.h> -#include <plat/common.h> +#include "common.h" #include <plat/board.h> #include <plat/keypad.h> #include <plat/usb.h> @@ -610,4 +610,5 @@ MACHINE_START(HERALD, "HTC Herald") .init_irq = omap1_init_irq, .init_machine = htcherald_init, .timer = &omap1_timer, + .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 273153dba15b..309369ea6978 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -37,7 +37,7 @@ #include <plat/tc.h> #include <plat/usb.h> #include <plat/keypad.h> -#include <plat/common.h> +#include "common.h" #include <plat/mmc.h> /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ @@ -460,4 +460,5 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") .init_irq = omap1_init_irq, .init_machine = innovator_init, .timer = &omap1_timer, + .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 6798b8488315..f9efc036ba96 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -30,7 +30,7 @@ #include <plat/usb.h> #include <plat/board.h> #include <plat/keypad.h> -#include <plat/common.h> +#include "common.h" #include <plat/hwa742.h> #include <plat/lcd_mipid.h> #include <plat/mmc.h> @@ -259,4 +259,5 @@ MACHINE_START(NOKIA770, "Nokia 770") .init_irq = omap1_init_irq, .init_machine = omap_nokia770_init, .timer = &omap1_timer, + .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index c3859278d257..675de06557aa 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -51,7 +51,7 @@ #include <plat/usb.h> #include <plat/mux.h> #include <plat/tc.h> -#include <plat/common.h> +#include "common.h" /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ #define OMAP_OSK_ETHR_START 0x04800300 @@ -578,4 +578,5 @@ MACHINE_START(OMAP_OSK, "TI-OSK") .init_irq = omap1_init_irq, .init_machine = osk_init, .timer = &omap1_timer, + .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index f9c44cb15b47..81fa27f88369 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -41,7 +41,7 @@ #include <plat/board.h> #include <plat/irda.h> #include <plat/keypad.h> -#include <plat/common.h> +#include "common.h" #define PALMTE_USBDETECT_GPIO 0 #define PALMTE_USB_OR_DC_GPIO 1 @@ -270,4 +270,5 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .init_irq = omap1_init_irq, .init_machine = omap_palmte_init, .timer = &omap1_timer, + .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 11a98539f7bb..81cb82178388 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -39,7 +39,7 @@ #include <plat/board.h> #include <plat/irda.h> #include <plat/keypad.h> -#include <plat/common.h> +#include "common.h" #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -317,4 +317,5 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .init_irq = omap1_init_irq, .init_machine = omap_palmtt_init, .timer = &omap1_timer, + .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 42061573e380..e881945ce8ec 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -41,7 +41,7 @@ #include <plat/board.h> #include <plat/irda.h> #include <plat/keypad.h> -#include <plat/common.h> +#include "common.h" #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -334,4 +334,5 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") .init_irq = omap1_init_irq, .init_machine = omap_palmz71_init, .timer = &omap1_timer, + .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 203ae07550db..c000bed76276 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -32,7 +32,7 @@ #include <plat/fpga.h> #include <plat/flash.h> #include <plat/keypad.h> -#include <plat/common.h> +#include "common.h" #include <plat/board.h> static const unsigned int p2_keymap[] = { @@ -352,4 +352,5 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") .init_irq = omap1_init_irq, .init_machine = omap_perseus2_init, .timer = &omap1_timer, + .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 092a4c046407..7bcd82ab0fd0 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -40,7 +40,7 @@ #include <plat/usb.h> #include <plat/tc.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/keypad.h> #include <plat/board-sx1.h> @@ -416,4 +416,5 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1") .init_irq = omap1_init_irq, .init_machine = omap_sx1_init, .timer = &omap1_timer, + .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 61ed6cdab2bd..f83a502dc93c 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -28,13 +28,12 @@ #include <linux/export.h> #include <mach/hardware.h> -#include <mach/system.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <plat/board-voiceblue.h> -#include <plat/common.h> +#include "common.h" #include <plat/flash.h> #include <plat/mux.h> #include <plat/tc.h> @@ -221,7 +220,7 @@ void voiceblue_wdt_ping(void) gpio_set_value(0, wdt_gpio_state); } -static void voiceblue_reset(char mode, const char *cmd) +static void voiceblue_restart(char mode, const char *cmd) { /* * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 @@ -285,8 +284,6 @@ static void __init voiceblue_init(void) * (it is connected through invertor) */ omap_writeb(0x00, OMAP_LPG1_LCR); omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ - - arch_reset = voiceblue_reset; } MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") @@ -298,4 +295,5 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") .init_irq = omap1_init_irq, .init_machine = voiceblue_init, .timer = &omap1_timer, + .restart = voiceblue_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 84ef70476b51..0c50df05d135 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -197,11 +197,10 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate) ref_rate = ck_ref_p->rate; for (ptr = omap1_rate_table; ptr->rate; ptr++) { - if (ptr->xtal != ref_rate) + if (!(ptr->flags & cpu_mask)) continue; - /* DPLL1 cannot be reprogrammed without risking system crash */ - if (likely(dpll1_rate != 0) && ptr->pll_rate != dpll1_rate) + if (ptr->xtal != ref_rate) continue; /* Can check only after xtal frequency check */ @@ -215,12 +214,8 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate) /* * In most cases we should not need to reprogram DPLL. * Reprogramming the DPLL is tricky, it must be done from SRAM. - * (on 730, bit 13 must always be 1) */ - if (cpu_is_omap7xx()) - omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000); - else - omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); + omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); /* XXX Do we need to recalculate the tree below DPLL1 at this point? */ ck_dpll1_p->rate = ptr->pll_rate; @@ -290,6 +285,9 @@ long omap1_round_to_table_rate(struct clk *clk, unsigned long rate) highest_rate = -EINVAL; for (ptr = omap1_rate_table; ptr->rate; ptr++) { + if (!(ptr->flags & cpu_mask)) + continue; + if (ptr->xtal != ref_rate) continue; diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 16b1423b454a..3d04f4f67676 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -111,4 +111,7 @@ extern const struct clkops clkops_dummy; extern const struct clkops clkops_uart_16xx; extern const struct clkops clkops_generic; +/* used for passing SoC type to omap1_{select,round_to}_table_rate() */ +extern u32 cpu_mask; + #endif diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 1297bb58869c..94699a82a734 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -16,6 +16,8 @@ #include <linux/kernel.h> #include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> #include <linux/io.h> #include <asm/mach-types.h> /* for machine_is_* */ @@ -23,6 +25,7 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/clkdev_omap.h> +#include <plat/sram.h> /* for omap_sram_reprogram_clock() */ #include <plat/usb.h> /* for OTG_BASE */ #include "clock.h" @@ -776,12 +779,14 @@ static void __init omap1_show_rates(void) arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); } +u32 cpu_mask; + int __init omap1_clk_init(void) { struct omap_clk *c; const struct omap_clock_config *info; int crystal_type = 0; /* Default 12 MHz */ - u32 reg, cpu_mask; + u32 reg; #ifdef CONFIG_DEBUG_LL /* @@ -806,6 +811,8 @@ int __init omap1_clk_init(void) clk_preinit(c->lk.clk); cpu_mask = 0; + if (cpu_is_omap1710()) + cpu_mask |= CK_1710; if (cpu_is_omap16xx()) cpu_mask |= CK_16XX; if (cpu_is_omap1510()) @@ -927,16 +934,18 @@ int __init omap1_clk_init(void) void __init omap1_clk_late_init(void) { - if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE) - return; + unsigned long rate = ck_dpll1.rate; /* Find the highest supported frequency and enable it */ if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { pr_err("System frequencies not set, using default. Check your config.\n"); - omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); + /* + * Reprogramming the DPLL is tricky, it must be done from SRAM. + */ + omap_sram_reprogram_clock(0x2290, 0x0005); ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE; } propagate_rate(&ck_dpll1); omap1_show_rates(); + loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate); } diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h new file mode 100644 index 000000000000..a9a5146dd2d4 --- /dev/null +++ b/arch/arm/mach-omap1/common.h @@ -0,0 +1,62 @@ +/* + * + * Header for code common to all OMAP1 machines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H +#define __ARCH_ARM_MACH_OMAP1_COMMON_H + +#include <plat/common.h> + +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +void omap7xx_map_io(void); +#else +static inline void omap7xx_map_io(void) +{ +} +#endif + +#ifdef CONFIG_ARCH_OMAP15XX +void omap15xx_map_io(void); +#else +static inline void omap15xx_map_io(void) +{ +} +#endif + +#ifdef CONFIG_ARCH_OMAP16XX +void omap16xx_map_io(void); +#else +static inline void omap16xx_map_io(void) +{ +} +#endif + +void omap1_init_early(void); +void omap1_init_irq(void); +void omap1_restart(char, const char *); + +extern struct sys_timer omap1_timer; +extern bool omap_32k_timer_init(void); + +#endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */ diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 475cb2f50d87..1d76a63c0983 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -22,7 +22,7 @@ #include <mach/hardware.h> #include <asm/mach/map.h> -#include <plat/common.h> +#include "common.h" #include <plat/tc.h> #include <plat/board.h> #include <plat/mux.h> diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h deleted file mode 100644 index 22ec4a479577..000000000000 --- a/arch/arm/mach-omap1/include/mach/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/vmalloc.h - * - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END 0xd8000000UL diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 7969cfda4454..8e55b6fb3478 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -121,7 +121,6 @@ void __init omap16xx_map_io(void) void omap1_init_early(void) { omap_check_revision(); - omap_ioremap_init(); /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort * on a Posted Write in the TIPB Bridge". diff --git a/arch/arm/mach-omap1/opp.h b/arch/arm/mach-omap1/opp.h index 07074d79adce..79a683864a5c 100644 --- a/arch/arm/mach-omap1/opp.h +++ b/arch/arm/mach-omap1/opp.h @@ -21,6 +21,7 @@ struct mpu_rate { unsigned long pll_rate; __u16 ckctl_val; __u16 dpllctl_val; + u32 flags; }; extern struct mpu_rate omap1_rate_table[]; diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c index 75a546514994..9cd4ddb51397 100644 --- a/arch/arm/mach-omap1/opp_data.c +++ b/arch/arm/mach-omap1/opp_data.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include <plat/clkdev_omap.h> #include "opp.h" /*------------------------------------------------------------------------- @@ -20,40 +21,34 @@ struct mpu_rate omap1_rate_table[] = { * NOTE: Comment order here is different from bits in CKCTL value: * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv */ -#if defined(CONFIG_OMAP_ARM_216MHZ) - { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_195MHZ) - { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_192MHZ) - { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */ - { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */ - { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */ - { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */ - { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_182MHZ) - { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_168MHZ) - { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_150MHZ) - { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */ -#endif -#if defined(CONFIG_OMAP_ARM_120MHZ) - { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */ -#endif -#if defined(CONFIG_OMAP_ARM_96MHZ) - { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */ -#endif -#if defined(CONFIG_OMAP_ARM_60MHZ) - { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */ -#endif -#if defined(CONFIG_OMAP_ARM_30MHZ) - { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */ -#endif + { 216000000, 12000000, 216000000, 0x050d, 0x2910, /* 1/1/2/2/2/8 */ + CK_1710 }, + { 195000000, 13000000, 195000000, 0x050e, 0x2790, /* 1/1/2/2/4/8 */ + CK_7XX }, + { 192000000, 19200000, 192000000, 0x050f, 0x2510, /* 1/1/2/2/8/8 */ + CK_16XX }, + { 192000000, 12000000, 192000000, 0x050f, 0x2810, /* 1/1/2/2/8/8 */ + CK_16XX }, + { 96000000, 12000000, 192000000, 0x055f, 0x2810, /* 2/2/2/2/8/8 */ + CK_16XX }, + { 48000000, 12000000, 192000000, 0x0baf, 0x2810, /* 4/4/4/8/8/8 */ + CK_16XX }, + { 24000000, 12000000, 192000000, 0x0fff, 0x2810, /* 8/8/8/8/8/8 */ + CK_16XX }, + { 182000000, 13000000, 182000000, 0x050e, 0x2710, /* 1/1/2/2/4/8 */ + CK_7XX }, + { 168000000, 12000000, 168000000, 0x010f, 0x2710, /* 1/1/1/2/8/8 */ + CK_16XX|CK_7XX }, + { 150000000, 12000000, 150000000, 0x010a, 0x2cb0, /* 1/1/1/2/4/4 */ + CK_1510 }, + { 120000000, 12000000, 120000000, 0x010a, 0x2510, /* 1/1/1/2/4/4 */ + CK_16XX|CK_1510|CK_310|CK_7XX }, + { 96000000, 12000000, 96000000, 0x0005, 0x2410, /* 1/1/1/1/2/2 */ + CK_16XX|CK_1510|CK_310|CK_7XX }, + { 60000000, 12000000, 60000000, 0x0005, 0x2290, /* 1/1/1/1/2/2 */ + CK_16XX|CK_1510|CK_310|CK_7XX }, + { 30000000, 12000000, 60000000, 0x0555, 0x2290, /* 2/2/2/2/2/2 */ + CK_16XX|CK_1510|CK_310|CK_7XX }, { 0, 0, 0, 0, 0 }, }; diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c index ad951ee69205..91d199b64979 100644 --- a/arch/arm/mach-omap1/reset.c +++ b/arch/arm/mach-omap1/reset.c @@ -5,10 +5,9 @@ #include <linux/io.h> #include <mach/hardware.h> -#include <mach/system.h> #include <plat/prcm.h> -void omap1_arch_reset(char mode, const char *cmd) +void omap1_restart(char mode, const char *cmd) { /* * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 @@ -21,5 +20,3 @@ void omap1_arch_reset(char mode, const char *cmd) omap_writew(1, ARM_RSTCT1); } - -void (*arch_reset)(char, const char *) = omap1_arch_reset; diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index a1837771e031..b8faffa44f9e 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -37,7 +37,6 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/interrupt.h> -#include <linux/sched.h> #include <linux/spinlock.h> #include <linux/clk.h> #include <linux/err.h> @@ -54,7 +53,7 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> -#include <plat/common.h> +#include "common.h" #ifdef CONFIG_OMAP_MPU_TIMER @@ -190,30 +189,9 @@ static __init void omap_init_mpu_timer(unsigned long rate) * --------------------------------------------------------------------------- */ -static DEFINE_CLOCK_DATA(cd); - -static inline unsigned long long notrace _omap_mpu_sched_clock(void) -{ - u32 cyc = ~omap_mpu_timer_read(1); - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -#ifndef CONFIG_OMAP_32K_TIMER -unsigned long long notrace sched_clock(void) -{ - return _omap_mpu_sched_clock(); -} -#else -static unsigned long long notrace omap_mpu_sched_clock(void) -{ - return _omap_mpu_sched_clock(); -} -#endif - -static void notrace mpu_update_sched_clock(void) +static u32 notrace omap_mpu_read_sched_clock(void) { - u32 cyc = ~omap_mpu_timer_read(1); - update_sched_clock(&cd, cyc, (u32)~0); + return ~omap_mpu_timer_read(1); } static void __init omap_init_clocksource(unsigned long rate) @@ -223,7 +201,7 @@ static void __init omap_init_clocksource(unsigned long rate) "%s: can't register clocksource!\n"; omap_mpu_timer_start(1, ~0, 1); - init_sched_clock(&cd, mpu_update_sched_clock, 32, rate); + setup_sched_clock(omap_mpu_read_sched_clock, 32, rate); if (clocksource_mmio_init(&timer->read_tim, "mpu_timer2", rate, 300, 32, clocksource_mmio_readl_down)) @@ -254,30 +232,6 @@ static inline void omap_mpu_timer_init(void) } #endif /* CONFIG_OMAP_MPU_TIMER */ -#if defined(CONFIG_OMAP_MPU_TIMER) && defined(CONFIG_OMAP_32K_TIMER) -static unsigned long long (*preferred_sched_clock)(void); - -unsigned long long notrace sched_clock(void) -{ - if (!preferred_sched_clock) - return 0; - - return preferred_sched_clock(); -} - -static inline void preferred_sched_clock_init(bool use_32k_sched_clock) -{ - if (use_32k_sched_clock) - preferred_sched_clock = omap_32k_sched_clock; - else - preferred_sched_clock = omap_mpu_sched_clock; -} -#else -static inline void preferred_sched_clock_init(bool use_32k_sched_clcok) -{ -} -#endif - static inline int omap_32k_timer_usable(void) { int res = false; @@ -299,12 +253,8 @@ static inline int omap_32k_timer_usable(void) */ static void __init omap1_timer_init(void) { - if (omap_32k_timer_usable()) { - preferred_sched_clock_init(1); - } else { + if (!omap_32k_timer_usable()) omap_mpu_timer_init(); - preferred_sched_clock_init(0); - } } struct sys_timer omap1_timer = { diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 96604a50c4fe..9a54ef4dcf5e 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -52,7 +52,7 @@ #include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> -#include <plat/common.h> +#include "common.h" #include <plat/dmtimer.h> /* diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index e1293aa513d3..904bd1dfcd2e 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -25,6 +25,7 @@ config ARCH_OMAP2 depends on ARCH_OMAP2PLUS default y select CPU_V6 + select MULTI_IRQ_HANDLER config ARCH_OMAP3 bool "TI OMAP3" @@ -36,13 +37,16 @@ config ARCH_OMAP3 select ARCH_HAS_OPP select PM_OPP if PM select ARM_CPU_SUSPEND if PM + select MULTI_IRQ_HANDLER config ARCH_OMAP4 bool "TI OMAP4" default y depends on ARCH_OMAP2PLUS + select CACHE_L2X0 select CPU_V7 select ARM_GIC + select HAVE_SMP select LOCAL_TIMERS if SMP select PL310_ERRATA_588369 select PL310_ERRATA_727915 @@ -74,8 +78,13 @@ config SOC_OMAP3430 default y select ARCH_OMAP_OTG -config SOC_OMAPTI816X - bool "TI816X support" +config SOC_OMAPTI81XX + bool "TI81XX support" + depends on ARCH_OMAP3 + default y + +config SOC_OMAPAM33XX + bool "AM33XX support" depends on ARCH_OMAP3 default y @@ -312,7 +321,12 @@ config MACH_OMAP_3630SDP config MACH_TI8168EVM bool "TI8168 Evaluation Module" - depends on SOC_OMAPTI816X + depends on SOC_OMAPTI81XX + default y + +config MACH_TI8148EVM + bool "TI8148 Evaluation Module" + depends on SOC_OMAPTI81XX default y config MACH_OMAP_4430SDP @@ -351,6 +365,27 @@ config OMAP3_SDRC_AC_TIMING wish to say no. Selecting yes without understanding what is going on could result in system crashes; +config OMAP4_ERRATA_I688 + bool "OMAP4 errata: Async Bridge Corruption" + depends on ARCH_OMAP4 + select ARCH_HAS_BARRIERS + help + If a data is stalled inside asynchronous bridge because of back + pressure, it may be accepted multiple times, creating pointer + misalignment that will corrupt next transfers on that data path + until next reset of the system (No recovery procedure once the + issue is hit, the path remains consistently broken). Async bridge + can be found on path between MPU to EMIF and MPU to L3 interconnect. + This situation can happen only when the idle is initiated by a + Master Request Disconnection (which is trigged by software when + executing WFI on CPU). + The work-around for this errata needs all the initiators connected + through async bridge must ensure that data path is properly drained + before issuing WFI. This condition will be met if one Strongly ordered + access is performed to the target right before executing the WFI. + In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained. + IO barrier ensure that there is no synchronisation loss on initiators + operating on both interconnect port simultaneously. endmenu endif diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b009f17dee56..fc9b238cbc19 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -11,10 +11,11 @@ hwmod-common = omap_hwmod.o \ omap_hwmod_common_data.o clock-common = clock.o clock_common_data.o \ clkt_dpll.o clkt_clksel.o +secure-common = omap-smc.o omap-secure.o -obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) -obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) -obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) +obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common) +obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) +obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o @@ -24,11 +25,13 @@ obj-$(CONFIG_TWL4030_CORE) += omap_twl.o obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o -obj-$(CONFIG_ARCH_OMAP4) += omap44xx-smc.o omap4-common.o +obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o \ + sleep44xx.o plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec) -AFLAGS_omap44xx-smc.o :=-Wa,-march=armv7-a$(plus_sec) +AFLAGS_omap-smc.o :=-Wa,-march=armv7-a$(plus_sec) +AFLAGS_sleep44xx.o :=-Wa,-march=armv7-a$(plus_sec) # Functions loaded to SRAM obj-$(CONFIG_SOC_OMAP2420) += sram242x.o @@ -62,7 +65,8 @@ obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o \ cpuidle34xx.o -obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o +obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o \ + cpuidle44xx.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o @@ -77,6 +81,7 @@ endif endif # PRCM +obj-y += prm_common.o obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \ vc3xxx_data.o vp3xxx_data.o @@ -86,7 +91,7 @@ obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \ obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \ cm44xx.o prcm_mpu44xx.o \ prminst44xx.o vc44xx_data.o \ - vp44xx_data.o + vp44xx_data.o prm44xx.o # OMAP voltage domains voltagedomain-common := voltage.o vc.o vp.o @@ -232,6 +237,7 @@ obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o +obj-$(CONFIG_MACH_TI8148EVM) += board-ti8168evm.o # Platform specific device init code diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index d704f0ac328d..7370983f809f 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -34,7 +34,7 @@ #include <asm/mach/map.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/gpmc.h> #include <plat/usb.h> #include <plat/gpmc-smc91x.h> @@ -301,6 +301,8 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") .map_io = omap243x_map_io, .init_early = omap2430_init_early, .init_irq = omap2_init_irq, + .handle_irq = omap2_intc_handle_irq, .init_machine = omap_2430sdp_init, .timer = &omap2_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 77142c13fa13..383717ba63b9 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -33,7 +33,7 @@ #include <plat/mcspi.h> #include <plat/board.h> #include <plat/usb.h> -#include <plat/common.h> +#include "common.h" #include <plat/dma.h> #include <plat/gpmc.h> #include <video/omapdss.h> @@ -475,106 +475,8 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; - -static struct omap_device_pad serial1_pads[] __initdata = { - /* - * Note that off output enable is an active low - * signal. So setting this means pin is a - * input enabled in off mode - */ - OMAP_MUX_STATIC("uart1_cts.uart1_cts", - OMAP_PIN_INPUT | - OMAP_PIN_OFF_INPUT_PULLDOWN | - OMAP_OFFOUT_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart1_rts.uart1_rts", - OMAP_PIN_OUTPUT | - OMAP_OFF_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart1_rx.uart1_rx", - OMAP_PIN_INPUT | - OMAP_PIN_OFF_INPUT_PULLDOWN | - OMAP_OFFOUT_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart1_tx.uart1_tx", - OMAP_PIN_OUTPUT | - OMAP_OFF_EN | - OMAP_MUX_MODE0), -}; - -static struct omap_device_pad serial2_pads[] __initdata = { - OMAP_MUX_STATIC("uart2_cts.uart2_cts", - OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_INPUT_PULLDOWN | - OMAP_OFFOUT_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_rts.uart2_rts", - OMAP_PIN_OUTPUT | - OMAP_OFF_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_rx.uart2_rx", - OMAP_PIN_INPUT | - OMAP_PIN_OFF_INPUT_PULLDOWN | - OMAP_OFFOUT_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_tx.uart2_tx", - OMAP_PIN_OUTPUT | - OMAP_OFF_EN | - OMAP_MUX_MODE0), -}; - -static struct omap_device_pad serial3_pads[] __initdata = { - OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx", - OMAP_PIN_INPUT_PULLDOWN | - OMAP_PIN_OFF_INPUT_PULLDOWN | - OMAP_OFFOUT_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd", - OMAP_PIN_OUTPUT | - OMAP_OFF_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx", - OMAP_PIN_INPUT | - OMAP_PIN_OFF_INPUT_PULLDOWN | - OMAP_OFFOUT_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx", - OMAP_PIN_OUTPUT | - OMAP_OFF_EN | - OMAP_MUX_MODE0), -}; - -static struct omap_board_data serial1_data __initdata = { - .id = 0, - .pads = serial1_pads, - .pads_cnt = ARRAY_SIZE(serial1_pads), -}; - -static struct omap_board_data serial2_data __initdata = { - .id = 1, - .pads = serial2_pads, - .pads_cnt = ARRAY_SIZE(serial2_pads), -}; - -static struct omap_board_data serial3_data __initdata = { - .id = 2, - .pads = serial3_pads, - .pads_cnt = ARRAY_SIZE(serial3_pads), -}; - -static inline void board_serial_init(void) -{ - omap_serial_init_port(&serial1_data); - omap_serial_init_port(&serial2_data); - omap_serial_init_port(&serial3_data); -} #else #define board_mux NULL - -static inline void board_serial_init(void) -{ - omap_serial_init(); -} #endif /* @@ -711,7 +613,7 @@ static void __init omap_3430sdp_init(void) else gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1; omap_ads7846_init(1, gpio_pendown, 310, NULL); - board_serial_init(); + omap_serial_init(); omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL); usb_musb_init(NULL); board_smc91x_init(); @@ -728,6 +630,8 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap_3430sdp_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index f552305162fc..6ef350d1ae4f 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -16,7 +16,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <plat/common.h> +#include "common.h" #include <plat/board.h> #include <plat/gpmc-smc91x.h> #include <plat/usb.h> @@ -215,6 +215,8 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") .map_io = omap3_map_io, .init_early = omap3630_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap_sdp_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 515646886b59..2ceb75d21eb2 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -27,13 +27,13 @@ #include <linux/leds_pwm.h> #include <mach/hardware.h> -#include <mach/omap4-common.h> +#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/usb.h> #include <plat/mmc.h> #include <plat/omap4-keypad.h> @@ -372,11 +372,17 @@ static struct platform_device sdp4430_vbat = { }, }; +static struct platform_device sdp4430_dmic_codec = { + .name = "dmic-codec", + .id = -1, +}; + static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_gpio_keys_device, &sdp4430_leds_gpio, &sdp4430_leds_pwm, &sdp4430_vbat, + &sdp4430_dmic_codec, }; static struct omap_musb_board_data musb_board_data = { @@ -404,6 +410,7 @@ static struct omap2_hsmmc_info mmc[] = { { .mmc = 5, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, + .pm_caps = MMC_PM_KEEP_POWER, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .ocr_mask = MMC_VDD_165_195, @@ -837,74 +844,8 @@ static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; -static struct omap_device_pad serial2_pads[] __initdata = { - OMAP_MUX_STATIC("uart2_cts.uart2_cts", - OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_rts.uart2_rts", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_rx.uart2_rx", - OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_tx.uart2_tx", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), -}; - -static struct omap_device_pad serial3_pads[] __initdata = { - OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx", - OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx", - OMAP_PIN_INPUT | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), -}; - -static struct omap_device_pad serial4_pads[] __initdata = { - OMAP_MUX_STATIC("uart4_rx.uart4_rx", - OMAP_PIN_INPUT | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart4_tx.uart4_tx", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), -}; - -static struct omap_board_data serial2_data __initdata = { - .id = 1, - .pads = serial2_pads, - .pads_cnt = ARRAY_SIZE(serial2_pads), -}; - -static struct omap_board_data serial3_data __initdata = { - .id = 2, - .pads = serial3_pads, - .pads_cnt = ARRAY_SIZE(serial3_pads), -}; - -static struct omap_board_data serial4_data __initdata = { - .id = 3, - .pads = serial4_pads, - .pads_cnt = ARRAY_SIZE(serial4_pads), -}; - -static inline void board_serial_init(void) -{ - struct omap_board_data bdata; - bdata.flags = 0; - bdata.pads = NULL; - bdata.pads_cnt = 0; - bdata.id = 0; - /* pass dummy data for UART1 */ - omap_serial_init_port(&bdata); - - omap_serial_init_port(&serial2_data); - omap_serial_init_port(&serial3_data); - omap_serial_init_port(&serial4_data); -} #else #define board_mux NULL - -static inline void board_serial_init(void) -{ - omap_serial_init(); -} #endif static void omap4_sdp4430_wifi_mux_init(void) @@ -954,7 +895,7 @@ static void __init omap_4430sdp_init(void) omap4_i2c_init(); omap_sfh7741prox_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); - board_serial_init(); + omap_serial_init(); omap_sdrc_init(NULL, NULL); omap4_sdp4430_wifi_init(); omap4_twl6030_hsmmc_init(mmc); @@ -984,6 +925,8 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") .map_io = omap4_map_io, .init_early = omap4430_init_early, .init_irq = gic_init_irq, + .handle_irq = gic_handle_irq, .init_machine = omap_4430sdp_init, .timer = &omap4_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 7834536ab416..c3851e8de28b 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -27,7 +27,7 @@ #include <asm/mach/map.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/usb.h> #include "mux.h" @@ -98,6 +98,8 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") .map_io = omap3_map_io, .init_early = am35xx_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = am3517_crane_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index d314f033c9df..4b1cfe32e6ba 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -24,6 +24,7 @@ #include <linux/i2c/pca953x.h> #include <linux/can/platform/ti_hecc.h> #include <linux/davinci_emac.h> +#include <linux/mmc/host.h> #include <mach/hardware.h> #include <mach/am35xx.h> @@ -32,7 +33,7 @@ #include <asm/mach/map.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> @@ -40,6 +41,7 @@ #include "mux.h" #include "control.h" +#include "hsmmc.h" #define AM35XX_EVM_MDIO_FREQUENCY (1000000) @@ -455,6 +457,23 @@ static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata) static struct omap_board_config_kernel am3517_evm_config[] __initdata = { }; +static struct omap2_hsmmc_info mmc[] = { + { + .mmc = 1, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = 127, + .gpio_wp = 126, + }, + { + .mmc = 2, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = 128, + .gpio_wp = 129, + }, + {} /* Terminator */ +}; + + static void __init am3517_evm_init(void) { omap_board_config = am3517_evm_config; @@ -483,6 +502,9 @@ static void __init am3517_evm_init(void) /* MUSB */ am3517_evm_musb_init(); + + /* MMC init function */ + omap2_hsmmc_init(mmc); } MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") @@ -491,6 +513,8 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") .map_io = omap3_map_io, .init_early = am35xx_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = am3517_evm_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index de8134b7f580..ac773829941f 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -37,7 +37,7 @@ #include <plat/led.h> #include <plat/usb.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/gpmc.h> #include <video/omapdss.h> @@ -354,6 +354,8 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_irq = omap2_init_irq, + .handle_irq = omap2_intc_handle_irq, .init_machine = omap_apollon_init, .timer = &omap2_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index bd1bcacb40f9..e921e3be24a4 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -37,7 +37,7 @@ #include <asm/mach/map.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/nand.h> #include <plat/gpmc.h> #include <plat/usb.h> @@ -53,7 +53,8 @@ #include "hsmmc.h" #include "common-board-devices.h" -#define CM_T35_GPIO_PENDOWN 57 +#define CM_T35_GPIO_PENDOWN 57 +#define SB_T35_USB_HUB_RESET_GPIO 167 #define CM_T35_SMSC911X_CS 5 #define CM_T35_SMSC911X_GPIO 163 @@ -339,8 +340,10 @@ static struct regulator_consumer_supply cm_t35_vsim_supply[] = { REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply cm_t35_vdvi_supply[] = { - REGULATOR_SUPPLY("vdvi", "omapdss"), +static struct regulator_consumer_supply cm_t35_vio_supplies[] = { + REGULATOR_SUPPLY("vcc", "spi1.0"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -373,6 +376,19 @@ static struct regulator_init_data cm_t35_vsim = { .consumer_supplies = cm_t35_vsim_supply, }; +static struct regulator_init_data cm_t35_vio = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, + .num_consumer_supplies = ARRAY_SIZE(cm_t35_vio_supplies), + .consumer_supplies = cm_t35_vio_supplies, +}; + static uint32_t cm_t35_keymap[] = { KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT), KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN), @@ -421,6 +437,23 @@ static struct usbhs_omap_board_data usbhs_bdata __initdata = { .reset_gpio_port[2] = -EINVAL }; +static void cm_t35_init_usbh(void) +{ + int err; + + err = gpio_request_one(SB_T35_USB_HUB_RESET_GPIO, + GPIOF_OUT_INIT_LOW, "usb hub rst"); + if (err) { + pr_err("SB-T35: usb hub rst gpio request failed: %d\n", err); + } else { + udelay(10); + gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1); + msleep(1); + } + + usbhs_init(&usbhs_bdata); +} + static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -456,17 +489,14 @@ static struct twl4030_platform_data cm_t35_twldata = { .gpio = &cm_t35_gpio_data, .vmmc1 = &cm_t35_vmmc1, .vsim = &cm_t35_vsim, + .vio = &cm_t35_vio, }; static void __init cm_t35_init_i2c(void) { omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB, - TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - - cm_t35_twldata.vpll2->constraints.name = "VDVI"; - cm_t35_twldata.vpll2->num_consumer_supplies = - ARRAY_SIZE(cm_t35_vdvi_supply); - cm_t35_twldata.vpll2->consumer_supplies = cm_t35_vdvi_supply; + TWL_COMMON_REGULATOR_VDAC | + TWL_COMMON_PDATA_AUDIO); omap3_pmic_init("tps65930", &cm_t35_twldata); } @@ -570,24 +600,28 @@ static void __init cm_t3x_common_dss_mux_init(int mux_mode) static void __init cm_t35_init_mux(void) { - omap_mux_init_signal("gpio_70", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("gpio_71", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("gpio_72", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("gpio_73", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("gpio_74", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("gpio_75", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); - cm_t3x_common_dss_mux_init(OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + int mux_mode = OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT; + + omap_mux_init_signal("dss_data0.dss_data0", mux_mode); + omap_mux_init_signal("dss_data1.dss_data1", mux_mode); + omap_mux_init_signal("dss_data2.dss_data2", mux_mode); + omap_mux_init_signal("dss_data3.dss_data3", mux_mode); + omap_mux_init_signal("dss_data4.dss_data4", mux_mode); + omap_mux_init_signal("dss_data5.dss_data5", mux_mode); + cm_t3x_common_dss_mux_init(mux_mode); } static void __init cm_t3730_init_mux(void) { - omap_mux_init_signal("sys_boot0", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("sys_boot1", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("sys_boot3", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("sys_boot4", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("sys_boot5", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("sys_boot6", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); - cm_t3x_common_dss_mux_init(OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + int mux_mode = OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT; + + omap_mux_init_signal("sys_boot0", mux_mode); + omap_mux_init_signal("sys_boot1", mux_mode); + omap_mux_init_signal("sys_boot3", mux_mode); + omap_mux_init_signal("sys_boot4", mux_mode); + omap_mux_init_signal("sys_boot5", mux_mode); + omap_mux_init_signal("sys_boot6", mux_mode); + cm_t3x_common_dss_mux_init(mux_mode); } #else static inline void cm_t35_init_mux(void) {} @@ -612,7 +646,7 @@ static void __init cm_t3x_common_init(void) cm_t35_init_display(); usb_musb_init(NULL); - usbhs_init(&usbhs_bdata); + cm_t35_init_usbh(); } static void __init cm_t35_init(void) @@ -634,8 +668,10 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t35_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END MACHINE_START(CM_T3730, "Compulab CM-T3730") @@ -644,6 +680,8 @@ MACHINE_START(CM_T3730, "Compulab CM-T3730") .map_io = omap3_map_io, .init_early = omap3630_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3730_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 3f4dc6626845..f36d694d2159 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -39,7 +39,7 @@ #include <asm/mach/map.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/usb.h> #include <plat/nand.h> #include <plat/gpmc.h> @@ -299,6 +299,8 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517") .map_io = omap3_map_io, .init_early = am35xx_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3517_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 90154e411da0..e873063f4fda 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -41,7 +41,7 @@ #include <asm/mach/flash.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/usb.h> @@ -660,6 +660,8 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = devkit8000_init, .timer = &omap3_secure_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index fb55fa3dad5a..d58756060483 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -20,8 +20,7 @@ #include <asm/mach/arch.h> #include <plat/board.h> -#include <plat/common.h> -#include <mach/omap4-common.h> +#include "common.h" #include "common-board-devices.h" /* @@ -70,7 +69,6 @@ static void __init omap_generic_init(void) if (node) irq_domain_add_simple(node, 0); - omap_serial_init(); omap_sdrc_init(NULL, NULL); of_platform_populate(NULL, omap_dt_match_table, NULL, NULL); @@ -107,6 +105,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .init_machine = omap_generic_init, .timer = &omap2_timer, .dt_compat = omap242x_boards_compat, + .restart = omap_prcm_restart, MACHINE_END #endif @@ -122,9 +121,11 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)") .map_io = omap243x_map_io, .init_early = omap2430_init_early, .init_irq = omap2_init_irq, + .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .timer = &omap2_timer, .dt_compat = omap243x_boards_compat, + .restart = omap_prcm_restart, MACHINE_END #endif @@ -143,6 +144,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .init_machine = omap3_init, .timer = &omap3_timer, .dt_compat = omap3_boards_compat, + .restart = omap_prcm_restart, MACHINE_END #endif @@ -161,5 +163,6 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .init_machine = omap4_init, .timer = &omap4_timer, .dt_compat = omap4_boards_compat, + .restart = omap_prcm_restart, MACHINE_END #endif diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 8b351d92a1cc..54af800d143c 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -34,7 +34,7 @@ #include <plat/usb.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/menelaus.h> #include <plat/dma.h> #include <plat/gpmc.h> @@ -396,6 +396,8 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board") .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_irq = omap2_init_irq, + .handle_irq = omap2_intc_handle_irq, .init_machine = omap_h4_init, .timer = &omap2_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index d0a3f78a9b69..a59ace0ed560 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -28,7 +28,7 @@ #include <asm/mach/arch.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/gpmc.h> #include <plat/usb.h> #include <video/omapdss.h> @@ -672,8 +672,10 @@ MACHINE_START(IGEP0020, "IGEP v2 board") .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = igep_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END MACHINE_START(IGEP0030, "IGEP OMAP3 module") @@ -682,6 +684,8 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module") .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = igep_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index e179da0c4da5..2d2a61f7dcbf 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -36,7 +36,7 @@ #include <plat/mcspi.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/gpmc.h> #include <mach/board-zoom.h> @@ -434,6 +434,8 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board") .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap_ldp_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index e9d5f4a3d064..42a4d11fad23 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -26,7 +26,7 @@ #include <asm/mach-types.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/menelaus.h> #include <mach/irqs.h> #include <plat/mcspi.h> @@ -46,7 +46,7 @@ static struct device *mmc_device; #define TUSB6010_GPIO_ENABLE 0 #define TUSB6010_DMACHAN 0x3f -#ifdef CONFIG_USB_MUSB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_TUSB6010_MODULE) /* * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and * 1.5 V voltage regulators of PM companion chip. Companion chip will then @@ -644,15 +644,15 @@ static inline void board_serial_init(void) bdata.pads_cnt = 0; bdata.id = 0; - omap_serial_init_port(&bdata); + omap_serial_init_port(&bdata, NULL); bdata.id = 1; - omap_serial_init_port(&bdata); + omap_serial_init_port(&bdata, NULL); bdata.id = 2; bdata.pads = serial2_pads; bdata.pads_cnt = ARRAY_SIZE(serial2_pads); - omap_serial_init_port(&bdata); + omap_serial_init_port(&bdata, NULL); } #else @@ -689,8 +689,10 @@ MACHINE_START(NOKIA_N800, "Nokia N800") .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_irq = omap2_init_irq, + .handle_irq = omap2_intc_handle_irq, .init_machine = n8x0_init_machine, .timer = &omap2_timer, + .restart = omap_prcm_restart, MACHINE_END MACHINE_START(NOKIA_N810, "Nokia N810") @@ -699,8 +701,10 @@ MACHINE_START(NOKIA_N810, "Nokia N810") .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_irq = omap2_init_irq, + .handle_irq = omap2_intc_handle_irq, .init_machine = n8x0_init_machine, .timer = &omap2_timer, + .restart = omap_prcm_restart, MACHINE_END MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") @@ -709,6 +713,8 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_irq = omap2_init_irq, + .handle_irq = omap2_intc_handle_irq, .init_machine = n8x0_init_machine, .timer = &omap2_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 4a71cb7e42d4..7ffcd2839e7b 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -40,7 +40,7 @@ #include <asm/mach/flash.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <video/omapdss.h> #include <video/omap-panel-dvi.h> #include <plat/gpmc.h> @@ -559,6 +559,8 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") .map_io = omap3_map_io, .init_early = omap3_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_beagle_init, .timer = &omap3_secure_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index ec00b2ec7022..003fe34c9343 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -43,7 +43,7 @@ #include <plat/board.h> #include <plat/usb.h> -#include <plat/common.h> +#include "common.h" #include <plat/mcspi.h> #include <video/omapdss.h> #include <video/omap-panel-dvi.h> @@ -681,6 +681,8 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM") .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_evm_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 7c0f193f246d..4198dd017d8f 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -40,7 +40,7 @@ #include <plat/mux.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/gpmc-smsc911x.h> #include <plat/gpmc.h> #include <plat/sdrc.h> @@ -208,8 +208,10 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap3logic_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") @@ -217,6 +219,8 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap3logic_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index f7811f4cfc3d..1644b73017fc 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -41,7 +41,7 @@ #include <asm/mach/map.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <mach/hardware.h> #include <plat/mcspi.h> #include <plat/usb.h> @@ -606,6 +606,8 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap3pandora_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index ddb7d6663c6d..cb089a46f62f 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -35,7 +35,7 @@ #include <asm/mach/flash.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/usb.h> @@ -454,6 +454,8 @@ MACHINE_START(SBC3530, "OMAP3 STALKER") .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_stalker_init, .timer = &omap3_secure_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index a2d0d1971e27..a0b851aafcca 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -44,7 +44,7 @@ #include <asm/mach/flash.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/usb.h> @@ -381,6 +381,8 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_touchbook_init, .timer = &omap3_secure_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index a8c2c4263e38..e96a2e7ad36f 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -30,14 +30,14 @@ #include <linux/wl12xx.h> #include <mach/hardware.h> -#include <mach/omap4-common.h> +#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <video/omapdss.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/usb.h> #include <plat/mmc.h> #include <video/omap-panel-dvi.h> @@ -364,74 +364,8 @@ static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; -static struct omap_device_pad serial2_pads[] __initdata = { - OMAP_MUX_STATIC("uart2_cts.uart2_cts", - OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_rts.uart2_rts", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_rx.uart2_rx", - OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_tx.uart2_tx", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), -}; - -static struct omap_device_pad serial3_pads[] __initdata = { - OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx", - OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx", - OMAP_PIN_INPUT | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), -}; - -static struct omap_device_pad serial4_pads[] __initdata = { - OMAP_MUX_STATIC("uart4_rx.uart4_rx", - OMAP_PIN_INPUT | OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart4_tx.uart4_tx", - OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), -}; - -static struct omap_board_data serial2_data __initdata = { - .id = 1, - .pads = serial2_pads, - .pads_cnt = ARRAY_SIZE(serial2_pads), -}; - -static struct omap_board_data serial3_data __initdata = { - .id = 2, - .pads = serial3_pads, - .pads_cnt = ARRAY_SIZE(serial3_pads), -}; - -static struct omap_board_data serial4_data __initdata = { - .id = 3, - .pads = serial4_pads, - .pads_cnt = ARRAY_SIZE(serial4_pads), -}; - -static inline void board_serial_init(void) -{ - struct omap_board_data bdata; - bdata.flags = 0; - bdata.pads = NULL; - bdata.pads_cnt = 0; - bdata.id = 0; - /* pass dummy data for UART1 */ - omap_serial_init_port(&bdata); - - omap_serial_init_port(&serial2_data); - omap_serial_init_port(&serial3_data); - omap_serial_init_port(&serial4_data); -} #else #define board_mux NULL - -static inline void board_serial_init(void) -{ - omap_serial_init(); -} #endif /* Display DVI */ @@ -562,7 +496,7 @@ static void __init omap4_panda_init(void) omap4_panda_i2c_init(); platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); platform_device_register(&omap_vwlan_device); - board_serial_init(); + omap_serial_init(); omap_sdrc_init(NULL, NULL); omap4_twl6030_hsmmc_init(mmc); omap4_ehci_init(); @@ -577,6 +511,8 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board") .map_io = omap4_map_io, .init_early = omap4430_init_early, .init_irq = gic_init_irq, + .handle_irq = gic_handle_irq, .init_machine = omap4_panda_init, .timer = &omap4_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 4cf7aeabab86..52c0cef77165 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -43,7 +43,7 @@ #include <asm/mach/map.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-dvi.h> @@ -562,6 +562,8 @@ MACHINE_START(OVERO, "Gumstix Overo") .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = overo_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 616fb39763b0..8678b386c6a2 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -25,7 +25,7 @@ #include <plat/mmc.h> #include <plat/usb.h> #include <plat/gpmc.h> -#include <plat/common.h> +#include "common.h" #include <plat/onenand.h> #include "mux.h" @@ -149,6 +149,8 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") .map_io = omap3_map_io, .init_early = omap3630_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = rm680_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ba1aa07bdb29..acb4e77b39ef 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -15,6 +15,7 @@ #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> #include <linux/wl12xx.h> +#include <linux/spi/tsc2005.h> #include <linux/i2c.h> #include <linux/i2c/twl.h> #include <linux/clk.h> @@ -27,7 +28,7 @@ #include <plat/mcspi.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/dma.h> #include <plat/gpmc.h> #include <plat/onenand.h> @@ -58,6 +59,9 @@ #define RX51_USB_TRANSCEIVER_RST_GPIO 67 +#define RX51_TSC2005_RESET_GPIO 104 +#define RX51_TSC2005_IRQ_GPIO 100 + /* list all spi devices here */ enum { RX51_SPI_WL1251, @@ -66,6 +70,7 @@ enum { }; static struct wl12xx_platform_data wl1251_pdata; +static struct tsc2005_platform_data tsc2005_pdata; #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) static struct tsl2563_platform_data rx51_tsl2563_platform_data = { @@ -167,10 +172,10 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .modalias = "tsc2005", .bus_num = 1, .chip_select = 0, - /* .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),*/ + .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO), .max_speed_hz = 6000000, .controller_data = &tsc2005_mcspi_config, - /* .platform_data = &tsc2005_config,*/ + .platform_data = &tsc2005_pdata, }, }; @@ -193,7 +198,7 @@ static struct platform_device rx51_charger_device = { static void __init rx51_charger_init(void) { WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, - GPIOF_OUT_INIT_LOW, "isp1704_reset")); + GPIOF_OUT_INIT_HIGH, "isp1704_reset")); platform_device_register(&rx51_charger_device); } @@ -940,6 +945,9 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { }, #endif { + I2C_BOARD_INFO("bq27200", 0x55), + }, + { I2C_BOARD_INFO("tpa6130a2", 0x60), .platform_data = &rx51_tpa6130a2_data, } @@ -1086,6 +1094,42 @@ error: */ } +static struct tsc2005_platform_data tsc2005_pdata = { + .ts_pressure_max = 2048, + .ts_pressure_fudge = 2, + .ts_x_max = 4096, + .ts_x_fudge = 4, + .ts_y_max = 4096, + .ts_y_fudge = 7, + .ts_x_plate_ohm = 280, + .esd_timeout_ms = 8000, +}; + +static void rx51_tsc2005_set_reset(bool enable) +{ + gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); +} + +static void __init rx51_init_tsc2005(void) +{ + int r; + + r = gpio_request_one(RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ"); + if (r < 0) { + printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 IRQ"); + rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = 0; + } + + r = gpio_request_one(RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, + "tsc2005 reset"); + if (r >= 0) { + tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; + } else { + printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 reset"); + tsc2005_pdata.esd_timeout_ms = 0; + } +} + void __init rx51_peripherals_init(void) { rx51_i2c_init(); @@ -1094,6 +1138,7 @@ void __init rx51_peripherals_init(void) board_smc91x_init(); rx51_add_gpio_keys(); rx51_init_wl1251(); + rx51_init_tsc2005(); rx51_init_si4713(); spi_register_board_info(rx51_peripherals_spi_board_info, ARRAY_SIZE(rx51_peripherals_spi_board_info)); diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 4af7c4b2881a..27f01f051dff 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -25,7 +25,7 @@ #include <plat/mcspi.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" #include <plat/dma.h> #include <plat/gpmc.h> #include <plat/usb.h> @@ -127,6 +127,8 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = rx51_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index e6ee8842285c..ab9a7a9e9d64 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -1,5 +1,5 @@ /* - * Code for TI8168 EVM. + * Code for TI8168/TI8148 EVM. * * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/ * @@ -22,30 +22,46 @@ #include <plat/irqs.h> #include <plat/board.h> -#include <plat/common.h> +#include "common.h" +#include <plat/usb.h> -static struct omap_board_config_kernel ti8168_evm_config[] __initdata = { +static struct omap_musb_board_data musb_board_data = { + .set_phy_power = ti81xx_musb_phy_power, + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 500, }; -static void __init ti8168_evm_init(void) +static struct omap_board_config_kernel ti81xx_evm_config[] __initdata = { +}; + +static void __init ti81xx_evm_init(void) { omap_serial_init(); omap_sdrc_init(NULL, NULL); - omap_board_config = ti8168_evm_config; - omap_board_config_size = ARRAY_SIZE(ti8168_evm_config); -} - -static void __init ti8168_evm_map_io(void) -{ - omapti816x_map_common_io(); + omap_board_config = ti81xx_evm_config; + omap_board_config_size = ARRAY_SIZE(ti81xx_evm_config); + usb_musb_init(&musb_board_data); } MACHINE_START(TI8168EVM, "ti8168evm") /* Maintainer: Texas Instruments */ .atag_offset = 0x100, - .map_io = ti8168_evm_map_io, - .init_early = ti816x_init_early, - .init_irq = ti816x_init_irq, + .map_io = ti81xx_map_io, + .init_early = ti81xx_init_early, + .init_irq = ti81xx_init_irq, + .timer = &omap3_timer, + .init_machine = ti81xx_evm_init, + .restart = omap_prcm_restart, +MACHINE_END + +MACHINE_START(TI8148EVM, "ti8148evm") + /* Maintainer: Texas Instruments */ + .atag_offset = 0x100, + .map_io = ti81xx_map_io, + .init_early = ti81xx_init_early, + .init_irq = ti81xx_init_irq, .timer = &omap3_timer, - .init_machine = ti8168_evm_init, + .init_machine = ti81xx_evm_init, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 6d0aa4fcb7c3..8d7ce11cfeaf 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -24,7 +24,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/common.h> +#include "common.h" #include <plat/usb.h> #include <mach/board-zoom.h> diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index be6684dc4f55..5c20bcc57f2b 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -21,7 +21,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <plat/common.h> +#include "common.h" #include <plat/board.h> #include <plat/usb.h> @@ -135,8 +135,10 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap_zoom_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") @@ -145,6 +147,8 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") .map_io = omap3_map_io, .init_early = omap3630_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap_zoom_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 1f3481f8d695..f57ed5baeccf 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -35,7 +35,7 @@ #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" -u8 cpu_mask; +u16 cpu_mask; /* * clkdm_control: if true, then when a clock is enabled in the diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 2311bc217226..b8c2a686481c 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -132,7 +132,7 @@ void omap2_clk_print_new_rates(const char *hfclkin_ck_name, const char *core_ck_name, const char *mpu_ck_name); -extern u8 cpu_mask; +extern u16 cpu_mask; extern const struct clkops clkops_omap2_dflt_wait; extern const struct clkops clkops_dummy; diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 5d0064a4fb5a..d75e5f6b8a01 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -2480,6 +2480,16 @@ static struct clk uart4_fck = { .recalc = &followparent_recalc, }; +static struct clk uart4_fck_am35xx = { + .name = "uart4_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_UART4_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + static struct clk gpt2_fck = { .name = "gpt2_fck", .ops = &clkops_omap2_dflt_wait, @@ -3287,7 +3297,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs-omap.0", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs_omap", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX), CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), @@ -3323,7 +3333,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "pka_ick", &pka_ick, CK_34XX | CK_36XX), CLK(NULL, "core_l4_ick", &core_l4_ick, CK_3XXX), CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs-omap.0", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs_omap", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("omap_hsmmc.2", "ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "icr_ick", &icr_ick, CK_34XX | CK_36XX), CLK("omap-aes", "ick", &aes2_ick, CK_34XX | CK_36XX), @@ -3369,20 +3379,18 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "cam_ick", &cam_ick, CK_34XX | CK_36XX), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_34XX | CK_36XX), CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs-omap.0", "hs_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs-omap.0", "fs_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs-omap.0", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs-omap.0", "utmi_p1_gfclk", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "utmi_p2_gfclk", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "xclk60mhsp1_ck", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "xclk60mhsp2_ck", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "init_60m_fclk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs_omap", "utmi_p1_gfclk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "utmi_p2_gfclk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "xclk60mhsp1_ck", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "xclk60mhsp2_ck", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "init_60m_fclk", &dummy_ck, CK_3XXX), CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2PLUS | CK_36XX), CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX), CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_3XXX), @@ -3403,6 +3411,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX), CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX), CLK(NULL, "uart4_fck", &uart4_fck, CK_36XX), + CLK(NULL, "uart4_fck", &uart4_fck_am35xx, CK_3505 | CK_3517), CLK(NULL, "gpt2_fck", &gpt2_fck, CK_3XXX), CLK(NULL, "gpt3_fck", &gpt3_fck, CK_3XXX), CLK(NULL, "gpt4_fck", &gpt4_fck, CK_3XXX), @@ -3517,6 +3526,10 @@ int __init omap3xxx_clk_init(void) } else if (cpu_is_ti816x()) { cpu_mask = RATE_IN_TI816X; cpu_clkflg = CK_TI816X; + } else if (cpu_is_am33xx()) { + cpu_mask = RATE_IN_AM33XX; + } else if (cpu_is_ti814x()) { + cpu_mask = RATE_IN_TI814X; } else if (cpu_is_omap34xx()) { if (omap_rev() == OMAP3430_REV_ES1_0) { cpu_mask = RATE_IN_3430ES1; @@ -3600,7 +3613,7 @@ int __init omap3xxx_clk_init(void) * Lock DPLL5 -- here only until other device init code can * handle this */ - if (!cpu_is_ti816x() && (omap_rev() >= OMAP3430_REV_ES2_0)) + if (!cpu_is_ti81xx() && (omap_rev() >= OMAP3430_REV_ES2_0)) omap3_clk_lock_dpll5(); /* Avoid sleeping during omap3_core_dpll_m2_set_rate() */ diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 0798a802497a..08e86d793a1f 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -1206,6 +1206,14 @@ static const struct clksel ocp_abe_iclk_div[] = { { .parent = NULL }, }; +static struct clk mpu_periphclk = { + .name = "mpu_periphclk", + .parent = &dpll_mpu_ck, + .ops = &clkops_null, + .fixed_div = 2, + .recalc = &omap_fixed_divisor_recalc, +}; + static struct clk ocp_abe_iclk = { .name = "ocp_abe_iclk", .parent = &aess_fclk, @@ -3189,6 +3197,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "l4_div_ck", &l4_div_ck, CK_443X), CLK(NULL, "lp_clk_div_ck", &lp_clk_div_ck, CK_443X), CLK(NULL, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck, CK_443X), + CLK("smp_twd", NULL, &mpu_periphclk, CK_443X), CLK(NULL, "ocp_abe_iclk", &ocp_abe_iclk, CK_443X), CLK(NULL, "per_abe_24m_fclk", &per_abe_24m_fclk, CK_443X), CLK(NULL, "per_abe_nc_fclk", &per_abe_nc_fclk, CK_443X), @@ -3295,7 +3304,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "uart2_fck", &uart2_fck, CK_443X), CLK(NULL, "uart3_fck", &uart3_fck, CK_443X), CLK(NULL, "uart4_fck", &uart4_fck, CK_443X), - CLK("usbhs-omap.0", "fs_fck", &usb_host_fs_fck, CK_443X), + CLK("usbhs_omap", "fs_fck", &usb_host_fs_fck, CK_443X), CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk, CK_443X), CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk, CK_443X), CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk, CK_443X), @@ -3306,7 +3315,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "usb_host_hs_hsic60m_p2_clk", &usb_host_hs_hsic60m_p2_clk, CK_443X), CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk, CK_443X), CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk, CK_443X), - CLK("usbhs-omap.0", "hs_fck", &usb_host_hs_fck, CK_443X), + CLK("usbhs_omap", "hs_fck", &usb_host_hs_fck, CK_443X), CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk, CK_443X), CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk, CK_443X), CLK("musb-omap2430", "ick", &usb_otg_hs_ick, CK_443X), @@ -3314,7 +3323,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk, CK_443X), CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X), CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk, CK_443X), - CLK("usbhs-omap.0", "usbtll_ick", &usb_tll_hs_ick, CK_443X), + CLK("usbhs_omap", "usbtll_ick", &usb_tll_hs_ick, CK_443X), CLK(NULL, "usim_ck", &usim_ck, CK_443X), CLK(NULL, "usim_fclk", &usim_fclk, CK_443X), CLK(NULL, "usim_fck", &usim_fck, CK_443X), @@ -3374,8 +3383,8 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "uart2_ick", &dummy_ck, CK_443X), CLK(NULL, "uart3_ick", &dummy_ck, CK_443X), CLK(NULL, "uart4_ick", &dummy_ck, CK_443X), - CLK("usbhs-omap.0", "usbhost_ick", &dummy_ck, CK_443X), - CLK("usbhs-omap.0", "usbtll_fck", &dummy_ck, CK_443X), + CLK("usbhs_omap", "usbhost_ick", &dummy_ck, CK_443X), + CLK("usbhs_omap", "usbtll_fck", &dummy_ck, CK_443X), CLK("omap_wdt", "ick", &dummy_ck, CK_443X), CLK("omap_timer.1", "32k_ck", &sys_32k_ck, CK_443X), CLK("omap_timer.2", "32k_ck", &sys_32k_ck, CK_443X), diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c index 38830d8d4783..04d39cdd2112 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c @@ -18,7 +18,7 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/common.h> +#include "common.h" #include "cm.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/cm44xx.c b/arch/arm/mach-omap2/cm44xx.c index e96f53ea01a1..6a836303252c 100644 --- a/arch/arm/mach-omap2/cm44xx.c +++ b/arch/arm/mach-omap2/cm44xx.c @@ -18,7 +18,7 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/common.h> +#include "common.h" #include "cm.h" #include "cm1_44xx.h" diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index eb2a472bbf46..6204deaf85b1 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -20,7 +20,7 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/common.h> +#include "common.h" #include "cm.h" #include "cm1_44xx.h" diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 110e5b9db145..aaf421178c91 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -17,7 +17,7 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/common.h> +#include "common.h" #include <plat/board.h> #include <plat/mux.h> @@ -110,23 +110,49 @@ void __init omap3_map_io(void) /* * Adjust TAP register base such that omap3_check_revision accesses the correct - * TI816X register for checking device ID (it adds 0x204 to tap base while - * TI816X DEVICE ID register is at offset 0x600 from control base). + * TI81XX register for checking device ID (it adds 0x204 to tap base while + * TI81XX DEVICE ID register is at offset 0x600 from control base). */ -#define TI816X_TAP_BASE (TI816X_CTRL_BASE + \ - TI816X_CONTROL_DEVICE_ID - 0x204) +#define TI81XX_TAP_BASE (TI81XX_CTRL_BASE + \ + TI81XX_CONTROL_DEVICE_ID - 0x204) -static struct omap_globals ti816x_globals = { +static struct omap_globals ti81xx_globals = { .class = OMAP343X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(TI816X_TAP_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(TI816X_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE), + .tap = OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), }; -void __init omap2_set_globals_ti816x(void) +void __init omap2_set_globals_ti81xx(void) { - __omap2_set_globals(&ti816x_globals); + __omap2_set_globals(&ti81xx_globals); +} + +void __init ti81xx_map_io(void) +{ + omapti81xx_map_common_io(); +} + +#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + \ + TI81XX_CONTROL_DEVICE_ID - 0x204) + +static struct omap_globals am33xx_globals = { + .class = AM335X_CLASS, + .tap = AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE), + .ctrl = AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE), + .prm = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), + .cm = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), +}; + +void __init omap2_set_globals_am33xx(void) +{ + __omap2_set_globals(&am33xx_globals); +} + +void __init am33xx_map_io(void) +{ + omapam33xx_map_common_io(); } #endif diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h new file mode 100644 index 000000000000..febffde2ff10 --- /dev/null +++ b/arch/arm/mach-omap2/common.h @@ -0,0 +1,239 @@ +/* + * Header for code common to all OMAP2+ machines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H +#define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H +#ifndef __ASSEMBLER__ + +#include <linux/delay.h> +#include <plat/common.h> +#include <asm/proc-fns.h> + +#ifdef CONFIG_SOC_OMAP2420 +extern void omap242x_map_common_io(void); +#else +static inline void omap242x_map_common_io(void) +{ +} +#endif + +#ifdef CONFIG_SOC_OMAP2430 +extern void omap243x_map_common_io(void); +#else +static inline void omap243x_map_common_io(void) +{ +} +#endif + +#ifdef CONFIG_ARCH_OMAP3 +extern void omap34xx_map_common_io(void); +#else +static inline void omap34xx_map_common_io(void) +{ +} +#endif + +#ifdef CONFIG_SOC_OMAPTI81XX +extern void omapti81xx_map_common_io(void); +#else +static inline void omapti81xx_map_common_io(void) +{ +} +#endif + +#ifdef CONFIG_SOC_OMAPAM33XX +extern void omapam33xx_map_common_io(void); +#else +static inline void omapam33xx_map_common_io(void) +{ +} +#endif + +#ifdef CONFIG_ARCH_OMAP4 +extern void omap44xx_map_common_io(void); +#else +static inline void omap44xx_map_common_io(void) +{ +} +#endif + +extern void omap2_init_common_infrastructure(void); + +extern struct sys_timer omap2_timer; +extern struct sys_timer omap3_timer; +extern struct sys_timer omap3_secure_timer; +extern struct sys_timer omap4_timer; + +void omap2420_init_early(void); +void omap2430_init_early(void); +void omap3430_init_early(void); +void omap35xx_init_early(void); +void omap3630_init_early(void); +void omap3_init_early(void); /* Do not use this one */ +void am35xx_init_early(void); +void ti81xx_init_early(void); +void omap4430_init_early(void); +void omap_prcm_restart(char, const char *); + +/* + * IO bases for various OMAP processors + * Except the tap base, rest all the io bases + * listed are physical addresses. + */ +struct omap_globals { + u32 class; /* OMAP class to detect */ + void __iomem *tap; /* Control module ID code */ + void __iomem *sdrc; /* SDRAM Controller */ + void __iomem *sms; /* SDRAM Memory Scheduler */ + void __iomem *ctrl; /* System Control Module */ + void __iomem *ctrl_pad; /* PAD Control Module */ + void __iomem *prm; /* Power and Reset Management */ + void __iomem *cm; /* Clock Management */ + void __iomem *cm2; +}; + +void omap2_set_globals_242x(void); +void omap2_set_globals_243x(void); +void omap2_set_globals_3xxx(void); +void omap2_set_globals_443x(void); +void omap2_set_globals_ti81xx(void); +void omap2_set_globals_am33xx(void); + +/* These get called from omap2_set_globals_xxxx(), do not call these */ +void omap2_set_globals_tap(struct omap_globals *); +void omap2_set_globals_sdrc(struct omap_globals *); +void omap2_set_globals_control(struct omap_globals *); +void omap2_set_globals_prcm(struct omap_globals *); + +void omap242x_map_io(void); +void omap243x_map_io(void); +void omap3_map_io(void); +void am33xx_map_io(void); +void omap4_map_io(void); +void ti81xx_map_io(void); + +/** + * omap_test_timeout - busy-loop, testing a condition + * @cond: condition to test until it evaluates to true + * @timeout: maximum number of microseconds in the timeout + * @index: loop index (integer) + * + * Loop waiting for @cond to become true or until at least @timeout + * microseconds have passed. To use, define some integer @index in the + * calling code. After running, if @index == @timeout, then the loop has + * timed out. + */ +#define omap_test_timeout(cond, timeout, index) \ +({ \ + for (index = 0; index < timeout; index++) { \ + if (cond) \ + break; \ + udelay(1); \ + } \ +}) + +extern struct device *omap2_get_mpuss_device(void); +extern struct device *omap2_get_iva_device(void); +extern struct device *omap2_get_l3_device(void); +extern struct device *omap4_get_dsp_device(void); + +void omap2_init_irq(void); +void omap3_init_irq(void); +void ti81xx_init_irq(void); +extern int omap_irq_pending(void); +void omap_intc_save_context(void); +void omap_intc_restore_context(void); +void omap3_intc_suspend(void); +void omap3_intc_prepare_idle(void); +void omap3_intc_resume_idle(void); +void omap2_intc_handle_irq(struct pt_regs *regs); +void omap3_intc_handle_irq(struct pt_regs *regs); + +#ifdef CONFIG_CACHE_L2X0 +extern void __iomem *omap4_get_l2cache_base(void); +#endif + +#ifdef CONFIG_SMP +extern void __iomem *omap4_get_scu_base(void); +#else +static inline void __iomem *omap4_get_scu_base(void) +{ + return NULL; +} +#endif + +extern void __init gic_init_irq(void); +extern void omap_smc1(u32 fn, u32 arg); +extern void __iomem *omap4_get_sar_ram_base(void); +extern void omap_do_wfi(void); + +#ifdef CONFIG_SMP +/* Needed for secondary core boot */ +extern void omap_secondary_startup(void); +extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); +extern void omap_auxcoreboot_addr(u32 cpu_addr); +extern u32 omap_read_auxcoreboot0(void); +#endif + +#if defined(CONFIG_SMP) && defined(CONFIG_PM) +extern int omap4_mpuss_init(void); +extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state); +extern int omap4_finish_suspend(unsigned long cpu_state); +extern void omap4_cpu_resume(void); +extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state); +extern u32 omap4_mpuss_read_prev_context_state(void); +#else +static inline int omap4_enter_lowpower(unsigned int cpu, + unsigned int power_state) +{ + cpu_do_idle(); + return 0; +} + +static inline int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) +{ + cpu_do_idle(); + return 0; +} + +static inline int omap4_mpuss_init(void) +{ + return 0; +} + +static inline int omap4_finish_suspend(unsigned long cpu_state) +{ + return 0; +} + +static inline void omap4_cpu_resume(void) +{} + +static inline u32 omap4_mpuss_read_prev_context_state(void) +{ + return 0; +} +#endif +#endif /* __ASSEMBLER__ */ +#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index e34d27f8c49c..114c037e433c 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -15,7 +15,7 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <plat/common.h> +#include "common.h" #include <plat/sdrc.h> #include "cm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index d4ef75d5a382..0ba68d3764bc 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -52,8 +52,8 @@ #define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00 #define OMAP343X_CONTROL_GENERAL_WKUP 0xa60 -/* TI816X spefic control submodules */ -#define TI816X_CONTROL_DEVCONF 0x600 +/* TI81XX spefic control submodules */ +#define TI81XX_CONTROL_DEVCONF 0x600 /* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */ @@ -244,8 +244,8 @@ #define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250 #define OMAP3_PADCONF_SAD2D_IDLEACK 0x254 -/* TI816X CONTROL_DEVCONF register offsets */ -#define TI816X_CONTROL_DEVICE_ID (TI816X_CONTROL_DEVCONF + 0x000) +/* TI81XX CONTROL_DEVCONF register offsets */ +#define TI81XX_CONTROL_DEVICE_ID (TI81XX_CONTROL_DEVCONF + 0x000) /* * REVISIT: This list of registers is not comprehensive - there are more diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 942bb4f19f9f..464cffde58fe 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -25,15 +25,16 @@ #include <linux/sched.h> #include <linux/cpuidle.h> #include <linux/export.h> +#include <linux/cpu_pm.h> #include <plat/prcm.h> #include <plat/irqs.h> #include "powerdomain.h" #include "clockdomain.h" -#include <plat/serial.h> #include "pm.h" #include "control.h" +#include "common.h" #ifdef CONFIG_CPU_IDLE @@ -123,9 +124,23 @@ static int omap3_enter_idle(struct cpuidle_device *dev, pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle); } + /* + * Call idle CPU PM enter notifier chain so that + * VFP context is saved. + */ + if (mpu_state == PWRDM_POWER_OFF) + cpu_pm_enter(); + /* Execute ARM wfi */ omap_sram_idle(); + /* + * Call idle CPU PM enter notifier chain to restore + * VFP context. + */ + if (pwrdm_read_prev_pwrst(mpu_pd) == PWRDM_POWER_OFF) + cpu_pm_exit(); + /* Re-allow idle for C1 */ if (index == 0) { pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle); @@ -244,11 +259,6 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, struct omap3_idle_statedata *cx; int ret; - if (!omap3_can_sleep()) { - new_state_idx = drv->safe_state_index; - goto select_state; - } - /* * Prevent idle completely if CAM is active. * CAM does not have wakeup capability in OMAP3. diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c new file mode 100644 index 000000000000..cfdbb86bc84e --- /dev/null +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -0,0 +1,245 @@ +/* + * OMAP4 CPU idle Routines + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * Rajendra Nayak <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/sched.h> +#include <linux/cpuidle.h> +#include <linux/cpu_pm.h> +#include <linux/export.h> +#include <linux/clockchips.h> + +#include <asm/proc-fns.h> + +#include "common.h" +#include "pm.h" +#include "prm.h" + +#ifdef CONFIG_CPU_IDLE + +/* Machine specific information to be recorded in the C-state driver_data */ +struct omap4_idle_statedata { + u32 cpu_state; + u32 mpu_logic_state; + u32 mpu_state; + u8 valid; +}; + +static struct cpuidle_params cpuidle_params_table[] = { + /* C1 - CPU0 ON + CPU1 ON + MPU ON */ + {.exit_latency = 2 + 2 , .target_residency = 5, .valid = 1}, + /* C2- CPU0 OFF + CPU1 OFF + MPU CSWR */ + {.exit_latency = 328 + 440 , .target_residency = 960, .valid = 1}, + /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */ + {.exit_latency = 460 + 518 , .target_residency = 1100, .valid = 1}, +}; + +#define OMAP4_NUM_STATES ARRAY_SIZE(cpuidle_params_table) + +struct omap4_idle_statedata omap4_idle_data[OMAP4_NUM_STATES]; +static struct powerdomain *mpu_pd, *cpu0_pd, *cpu1_pd; + +/** + * omap4_enter_idle - Programs OMAP4 to enter the specified state + * @dev: cpuidle device + * @drv: cpuidle driver + * @index: the index of state to be entered + * + * Called from the CPUidle framework to program the device to the + * specified low power state selected by the governor. + * Returns the amount of time spent in the low power state. + */ +static int omap4_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + struct omap4_idle_statedata *cx = + cpuidle_get_statedata(&dev->states_usage[index]); + struct timespec ts_preidle, ts_postidle, ts_idle; + u32 cpu1_state; + int idle_time; + int new_state_idx; + int cpu_id = smp_processor_id(); + + /* Used to keep track of the total time in idle */ + getnstimeofday(&ts_preidle); + + local_irq_disable(); + local_fiq_disable(); + + /* + * CPU0 has to stay ON (i.e in C1) until CPU1 is OFF state. + * This is necessary to honour hardware recommondation + * of triggeing all the possible low power modes once CPU1 is + * out of coherency and in OFF mode. + * Update dev->last_state so that governor stats reflects right + * data. + */ + cpu1_state = pwrdm_read_pwrst(cpu1_pd); + if (cpu1_state != PWRDM_POWER_OFF) { + new_state_idx = drv->safe_state_index; + cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]); + } + + if (index > 0) + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id); + + /* + * Call idle CPU PM enter notifier chain so that + * VFP and per CPU interrupt context is saved. + */ + if (cx->cpu_state == PWRDM_POWER_OFF) + cpu_pm_enter(); + + pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state); + omap_set_pwrdm_state(mpu_pd, cx->mpu_state); + + /* + * Call idle CPU cluster PM enter notifier chain + * to save GIC and wakeupgen context. + */ + if ((cx->mpu_state == PWRDM_POWER_RET) && + (cx->mpu_logic_state == PWRDM_POWER_OFF)) + cpu_cluster_pm_enter(); + + omap4_enter_lowpower(dev->cpu, cx->cpu_state); + + /* + * Call idle CPU PM exit notifier chain to restore + * VFP and per CPU IRQ context. Only CPU0 state is + * considered since CPU1 is managed by CPU hotplug. + */ + if (pwrdm_read_prev_pwrst(cpu0_pd) == PWRDM_POWER_OFF) + cpu_pm_exit(); + + /* + * Call idle CPU cluster PM exit notifier chain + * to restore GIC and wakeupgen context. + */ + if (omap4_mpuss_read_prev_context_state()) + cpu_cluster_pm_exit(); + + if (index > 0) + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id); + + getnstimeofday(&ts_postidle); + ts_idle = timespec_sub(ts_postidle, ts_preidle); + + local_irq_enable(); + local_fiq_enable(); + + idle_time = ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * \ + USEC_PER_SEC; + + /* Update cpuidle counters */ + dev->last_residency = idle_time; + + return index; +} + +DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev); + +struct cpuidle_driver omap4_idle_driver = { + .name = "omap4_idle", + .owner = THIS_MODULE, +}; + +static inline void _fill_cstate(struct cpuidle_driver *drv, + int idx, const char *descr) +{ + struct cpuidle_state *state = &drv->states[idx]; + + state->exit_latency = cpuidle_params_table[idx].exit_latency; + state->target_residency = cpuidle_params_table[idx].target_residency; + state->flags = CPUIDLE_FLAG_TIME_VALID; + state->enter = omap4_enter_idle; + sprintf(state->name, "C%d", idx + 1); + strncpy(state->desc, descr, CPUIDLE_DESC_LEN); +} + +static inline struct omap4_idle_statedata *_fill_cstate_usage( + struct cpuidle_device *dev, + int idx) +{ + struct omap4_idle_statedata *cx = &omap4_idle_data[idx]; + struct cpuidle_state_usage *state_usage = &dev->states_usage[idx]; + + cx->valid = cpuidle_params_table[idx].valid; + cpuidle_set_statedata(state_usage, cx); + + return cx; +} + + + +/** + * omap4_idle_init - Init routine for OMAP4 idle + * + * Registers the OMAP4 specific cpuidle driver to the cpuidle + * framework with the valid set of states. + */ +int __init omap4_idle_init(void) +{ + struct omap4_idle_statedata *cx; + struct cpuidle_device *dev; + struct cpuidle_driver *drv = &omap4_idle_driver; + unsigned int cpu_id = 0; + + mpu_pd = pwrdm_lookup("mpu_pwrdm"); + cpu0_pd = pwrdm_lookup("cpu0_pwrdm"); + cpu1_pd = pwrdm_lookup("cpu1_pwrdm"); + if ((!mpu_pd) || (!cpu0_pd) || (!cpu1_pd)) + return -ENODEV; + + + drv->safe_state_index = -1; + dev = &per_cpu(omap4_idle_dev, cpu_id); + dev->cpu = cpu_id; + + /* C1 - CPU0 ON + CPU1 ON + MPU ON */ + _fill_cstate(drv, 0, "MPUSS ON"); + drv->safe_state_index = 0; + cx = _fill_cstate_usage(dev, 0); + cx->valid = 1; /* C1 is always valid */ + cx->cpu_state = PWRDM_POWER_ON; + cx->mpu_state = PWRDM_POWER_ON; + cx->mpu_logic_state = PWRDM_POWER_RET; + + /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */ + _fill_cstate(drv, 1, "MPUSS CSWR"); + cx = _fill_cstate_usage(dev, 1); + cx->cpu_state = PWRDM_POWER_OFF; + cx->mpu_state = PWRDM_POWER_RET; + cx->mpu_logic_state = PWRDM_POWER_RET; + + /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */ + _fill_cstate(drv, 2, "MPUSS OSWR"); + cx = _fill_cstate_usage(dev, 2); + cx->cpu_state = PWRDM_POWER_OFF; + cx->mpu_state = PWRDM_POWER_RET; + cx->mpu_logic_state = PWRDM_POWER_OFF; + + drv->state_count = OMAP4_NUM_STATES; + cpuidle_register_driver(&omap4_idle_driver); + + dev->state_count = OMAP4_NUM_STATES; + if (cpuidle_register_device(dev)) { + pr_err("%s: CPUidle register device failed\n", __func__); + return -EIO; + } + + return 0; +} +#else +int __init omap4_idle_init(void) +{ + return 0; +} +#endif /* CONFIG_CPU_IDLE */ diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index c15cfada5f13..46dfd1ae8f71 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -28,6 +28,7 @@ #include <plat/board.h> #include <plat/mcbsp.h> #include <plat/mmc.h> +#include <plat/iommu.h> #include <plat/dma.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> @@ -211,9 +212,15 @@ static struct platform_device omap3isp_device = { .resource = omap3isp_resources, }; +static struct omap_iommu_arch_data omap3_isp_iommu = { + .name = "isp", +}; + int omap3_init_camera(struct isp_platform_data *pdata) { omap3isp_device.dev.platform_data = pdata; + omap3isp_device.dev.archdata.iommu = &omap3_isp_iommu; + return platform_device_register(&omap3isp_device); } @@ -336,6 +343,27 @@ static void omap_init_mcpdm(void) static inline void omap_init_mcpdm(void) {} #endif +#if defined(CONFIG_SND_OMAP_SOC_DMIC) || \ + defined(CONFIG_SND_OMAP_SOC_DMIC_MODULE) + +static void omap_init_dmic(void) +{ + struct omap_hwmod *oh; + struct platform_device *pdev; + + oh = omap_hwmod_lookup("dmic"); + if (!oh) { + printk(KERN_ERR "Could not look up mcpdm hw_mod\n"); + return; + } + + pdev = omap_device_build("omap-dmic", -1, oh, NULL, 0, NULL, 0, 0); + WARN(IS_ERR(pdev), "Can't build omap_device for omap-dmic.\n"); +} +#else +static inline void omap_init_dmic(void) {} +#endif + #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include <plat/mcspi.h> @@ -681,6 +709,7 @@ static int __init omap2_init_devices(void) */ omap_init_audio(); omap_init_mcpdm(); + omap_init_dmic(); omap_init_camera(); omap_init_mbox(); omap_init_mcspi(); diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index dce9905d64bb..bc6cf863a563 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -22,12 +22,13 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/err.h> +#include <linux/delay.h> #include <video/omapdss.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> #include <plat/omap-pm.h> -#include <plat/common.h> +#include "common.h" #include "control.h" #include "display.h" diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index f4a1020559a7..bd844af13af5 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -171,6 +171,17 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, } } +static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc) +{ + u32 reg; + + if (mmc->slots[0].internal_clock) { + reg = omap_ctrl_readl(control_devconf1_offset); + reg |= OMAP2_MMCSDIO2ADPCLKISEL; + omap_ctrl_writel(reg, control_devconf1_offset); + } +} + static void hsmmc23_before_set_reg(struct device *dev, int slot, int power_on, int vdd) { @@ -179,16 +190,19 @@ static void hsmmc23_before_set_reg(struct device *dev, int slot, if (mmc->slots[0].remux) mmc->slots[0].remux(dev, slot, power_on); - if (power_on) { - /* Only MMC2 supports a CLKIN */ - if (mmc->slots[0].internal_clock) { - u32 reg; + if (power_on) + hsmmc2_select_input_clk_src(mmc); +} - reg = omap_ctrl_readl(control_devconf1_offset); - reg |= OMAP2_MMCSDIO2ADPCLKISEL; - omap_ctrl_writel(reg, control_devconf1_offset); - } - } +static int am35x_hsmmc2_set_power(struct device *dev, int slot, + int power_on, int vdd) +{ + struct omap_mmc_platform_data *mmc = dev->platform_data; + + if (power_on) + hsmmc2_select_input_clk_src(mmc); + + return 0; } static int nop_mmc_set_power(struct device *dev, int slot, int power_on, @@ -200,10 +214,12 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on, static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, int controller_nr) { - if (gpio_is_valid(mmc_controller->slots[0].switch_pin)) + if (gpio_is_valid(mmc_controller->slots[0].switch_pin) && + (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, OMAP_PIN_INPUT_PULLUP); - if (gpio_is_valid(mmc_controller->slots[0].gpio_wp)) + if (gpio_is_valid(mmc_controller->slots[0].gpio_wp) && + (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, OMAP_PIN_INPUT_PULLUP); if (cpu_is_omap34xx()) { @@ -296,6 +312,7 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, mmc->slots[0].name = hc_name; mmc->nr_slots = 1; mmc->slots[0].caps = c->caps; + mmc->slots[0].pm_caps = c->pm_caps; mmc->slots[0].internal_clock = !c->ext_clock; mmc->dma_mask = 0xffffffff; if (cpu_is_omap44xx()) @@ -336,11 +353,17 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, * * temporary HACK: ocr_mask instead of fixed supply */ - mmc->slots[0].ocr_mask = c->ocr_mask; - - if (cpu_is_omap3517() || cpu_is_omap3505()) - mmc->slots[0].set_power = nop_mmc_set_power; + if (cpu_is_omap3505() || cpu_is_omap3517()) + mmc->slots[0].ocr_mask = MMC_VDD_165_195 | + MMC_VDD_26_27 | + MMC_VDD_27_28 | + MMC_VDD_29_30 | + MMC_VDD_30_31 | + MMC_VDD_31_32; else + mmc->slots[0].ocr_mask = c->ocr_mask; + + if (!cpu_is_omap3517() && !cpu_is_omap3505()) mmc->slots[0].features |= HSMMC_HAS_PBIAS; if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0)) @@ -363,6 +386,9 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, } } + if (cpu_is_omap3517() || cpu_is_omap3505()) + mmc->slots[0].set_power = nop_mmc_set_power; + /* OMAP3630 HSMMC1 supports only 4-bit */ if (cpu_is_omap3630() && (c->caps & MMC_CAP_8_BIT_DATA)) { @@ -372,6 +398,9 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, } break; case 2: + if (cpu_is_omap3517() || cpu_is_omap3505()) + mmc->slots[0].set_power = am35x_hsmmc2_set_power; + if (c->ext_clock) c->transceiver = 1; if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) { diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index f757e78d4d4f..c4409730c4bb 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -12,6 +12,7 @@ struct omap2_hsmmc_info { u8 mmc; /* controller 1/2/3 */ u32 caps; /* 4/8 wires and any additional host * capabilities OR'd (ref. linux/mmc/host.h) */ + u32 pm_caps; /* PM capabilities */ bool transceiver; /* MMC-2 option */ bool ext_clock; /* use external pin for input clock */ bool cover_only; /* No card detect - just cover switch */ diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index ace99944e96f..a12e224eb97d 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -21,7 +21,7 @@ #include <plat/cpu.h> #include <plat/i2c.h> -#include <plat/common.h> +#include "common.h" #include <plat/omap_hwmod.h> #include "mux.h" diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 7f47092a193f..6c5826605eae 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -21,7 +21,7 @@ #include <asm/cputype.h> -#include <plat/common.h> +#include "common.h" #include <plat/cpu.h> #include <mach/id.h> @@ -226,7 +226,7 @@ static void __init omap4_check_features(void) } } -static void __init ti816x_check_features(void) +static void __init ti81xx_check_features(void) { omap_features = OMAP3_HAS_NEON; } @@ -340,6 +340,29 @@ static void __init omap3_check_revision(const char **cpu_rev) break; } break; + case 0xb944: + omap_revision = AM335X_REV_ES1_0; + *cpu_rev = "1.0"; + case 0xb8f2: + switch (rev) { + case 0: + /* FALLTHROUGH */ + case 1: + omap_revision = TI8148_REV_ES1_0; + *cpu_rev = "1.0"; + break; + case 2: + omap_revision = TI8148_REV_ES2_0; + *cpu_rev = "2.0"; + break; + case 3: + /* FALLTHROUGH */ + default: + omap_revision = TI8148_REV_ES2_1; + *cpu_rev = "2.1"; + break; + } + break; default: /* Unknown default to latest silicon rev as default */ omap_revision = OMAP3630_REV_ES1_2; @@ -367,7 +390,7 @@ static void __init omap4_check_revision(void) * Few initial 4430 ES2.0 samples IDCODE is same as ES1.0 * Use ARM register to detect the correct ES version */ - if (!rev && (hawkeye != 0xb94e)) { + if (!rev && (hawkeye != 0xb94e) && (hawkeye != 0xb975)) { idcode = read_cpuid(CPUID_ID); rev = (idcode & 0xf) - 1; } @@ -389,8 +412,11 @@ static void __init omap4_check_revision(void) omap_revision = OMAP4430_REV_ES2_1; break; case 4: - default: omap_revision = OMAP4430_REV_ES2_2; + break; + case 6: + default: + omap_revision = OMAP4430_REV_ES2_3; } break; case 0xb94e: @@ -401,9 +427,17 @@ static void __init omap4_check_revision(void) break; } break; + case 0xb975: + switch (rev) { + case 0: + default: + omap_revision = OMAP4470_REV_ES1_0; + break; + } + break; default: /* Unknown default to latest silicon rev as default */ - omap_revision = OMAP4430_REV_ES2_2; + omap_revision = OMAP4430_REV_ES2_3; } pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16, @@ -432,6 +466,10 @@ static void __init omap3_cpuinfo(const char *cpu_rev) cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505"; } else if (cpu_is_ti816x()) { cpu_name = "TI816X"; + } else if (cpu_is_am335x()) { + cpu_name = "AM335X"; + } else if (cpu_is_ti814x()) { + cpu_name = "TI814X"; } else if (omap3_has_iva() && omap3_has_sgx()) { /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */ cpu_name = "OMAP3430/3530"; @@ -472,11 +510,11 @@ void __init omap2_check_revision(void) } else if (cpu_is_omap34xx()) { omap3_check_revision(&cpu_rev); - /* TI816X doesn't have feature register */ - if (!cpu_is_ti816x()) + /* TI81XX doesn't have feature register */ + if (!cpu_is_ti81xx()) omap3_check_features(); else - ti816x_check_features(); + ti81xx_check_features(); omap3_cpuinfo(cpu_rev); return; diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/barriers.h index 871f1ef7bff5..4fa72c7cc7cd 100644 --- a/arch/arm/mach-netx/include/mach/vmalloc.h +++ b/arch/arm/mach-omap2/include/mach/barriers.h @@ -1,11 +1,13 @@ /* - * arch/arm/mach-netx/include/mach/vmalloc.h + * OMAP memory barrier header. * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * Copyright (C) 2011 Texas Instruments, Inc. + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> * * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -14,6 +16,16 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END 0xd0000000UL + +#ifndef __MACH_BARRIERS_H +#define __MACH_BARRIERS_H + +extern void omap_bus_sync(void); + +#define rmb() dsb() +#define wmb() do { dsb(); outer_sync(); omap_bus_sync(); } while (0) +#define mb() wmb() + +#endif /* __MACH_BARRIERS_H */ diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 13f98e59cfef..cdfc2a1f0e75 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -66,11 +66,11 @@ omap_uart_lsr: .word 0 beq 34f @ configure OMAP3UART4 cmp \rp, #OMAP4UART4 @ only on 44xx beq 44f @ configure OMAP4UART4 - cmp \rp, #TI816XUART1 @ ti816x UART offsets different + cmp \rp, #TI81XXUART1 @ ti81Xx UART offsets different beq 81f @ configure UART1 - cmp \rp, #TI816XUART2 @ ti816x UART offsets different + cmp \rp, #TI81XXUART2 @ ti81Xx UART offsets different beq 82f @ configure UART2 - cmp \rp, #TI816XUART3 @ ti816x UART offsets different + cmp \rp, #TI81XXUART3 @ ti81Xx UART offsets different beq 83f @ configure UART3 cmp \rp, #ZOOM_UART @ only on zoom2/3 beq 95f @ configure ZOOM_UART @@ -94,11 +94,11 @@ omap_uart_lsr: .word 0 b 98f 44: mov \rp, #UART_OFFSET(OMAP4_UART4_BASE) b 98f -81: mov \rp, #UART_OFFSET(TI816X_UART1_BASE) +81: mov \rp, #UART_OFFSET(TI81XX_UART1_BASE) b 98f -82: mov \rp, #UART_OFFSET(TI816X_UART2_BASE) +82: mov \rp, #UART_OFFSET(TI81XX_UART2_BASE) b 98f -83: mov \rp, #UART_OFFSET(TI816X_UART3_BASE) +83: mov \rp, #UART_OFFSET(TI81XX_UART3_BASE) b 98f 95: ldr \rp, =ZOOM_UART_BASE diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S index feb90a10945a..56964a0c4c7e 100644 --- a/arch/arm/mach-omap2/include/mach/entry-macro.S +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -10,146 +10,9 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <mach/hardware.h> -#include <mach/io.h> -#include <mach/irqs.h> -#include <asm/hardware/gic.h> - -#include <plat/omap24xx.h> -#include <plat/omap34xx.h> -#include <plat/omap44xx.h> - -#include <plat/multi.h> - -#define OMAP2_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE) -#define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE) -#define OMAP4_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) -#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */ -#define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */ .macro disable_fiq .endm .macro arch_ret_to_user, tmp1, tmp2 .endm - -/* - * Unoptimized irq functions for multi-omap2, 3 and 4 - */ - -#ifdef MULTI_OMAP2 - /* - * Configure the interrupt base on the first interrupt. - * See also omap_irq_base_init for setting omap_irq_base. - */ - .macro get_irqnr_preamble, base, tmp - ldr \base, =omap_irq_base @ irq base address - ldr \base, [\base, #0] @ irq base value - .endm - - /* Check the pending interrupts. Note that base already set */ - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - tst \base, #0x100 @ gic address? - bne 4401f @ found gic - - /* Handle omap2 and omap3 */ - ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */ - cmp \irqnr, #0x0 - bne 9998f - ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */ - cmp \irqnr, #0x0 - bne 9998f - ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */ - cmp \irqnr, #0x0 - bne 9998f - - /* - * ti816x has additional IRQ pending register. Checking this - * register on omap2 & omap3 has no effect (read as 0). - */ - ldr \irqnr, [\base, #0xf8] /* IRQ pending reg 4 */ - cmp \irqnr, #0x0 -9998: - ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET] - and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */ - b 9999f - - /* Handle omap4 */ -4401: ldr \irqstat, [\base, #GIC_CPU_INTACK] - ldr \tmp, =1021 - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #15 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr -9999: - .endm - -#ifdef CONFIG_SMP - /* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt - * on the controller, since this requires the original irqstat - * value which we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - it cc - strcc \irqstat, [\base, #GIC_CPU_EOI] - it cs - cmpcs \irqnr, \irqnr - .endm -#endif /* CONFIG_SMP */ - -#else /* MULTI_OMAP2 */ - - -/* - * Optimized irq functions for omap2, 3 and 4 - */ - -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - .macro get_irqnr_preamble, base, tmp -#ifdef CONFIG_ARCH_OMAP2 - ldr \base, =OMAP2_IRQ_BASE -#else - ldr \base, =OMAP3_IRQ_BASE -#endif - .endm - - /* Check the pending interrupts. Note that base already set */ - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */ - cmp \irqnr, #0x0 - bne 9999f - ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */ - cmp \irqnr, #0x0 - bne 9999f - ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */ - cmp \irqnr, #0x0 -#ifdef CONFIG_SOC_OMAPTI816X - bne 9999f - ldr \irqnr, [\base, #0xf8] /* IRQ pending reg 4 */ - cmp \irqnr, #0x0 -#endif -9999: - ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET] - and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */ - - .endm -#endif - - -#ifdef CONFIG_ARCH_OMAP4 -#define HAVE_GET_IRQNR_PREAMBLE -#include <asm/hardware/entry-macro-gic.S> - - .macro get_irqnr_preamble, base, tmp - ldr \base, =OMAP4_IRQ_BASE - .endm - -#endif - -#endif /* MULTI_OMAP2 */ diff --git a/arch/arm/mach-omap2/include/mach/omap-secure.h b/arch/arm/mach-omap2/include/mach/omap-secure.h new file mode 100644 index 000000000000..c90a43589abe --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/omap-secure.h @@ -0,0 +1,57 @@ +/* + * omap-secure.h: OMAP Secure infrastructure header. + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef OMAP_ARCH_OMAP_SECURE_H +#define OMAP_ARCH_OMAP_SECURE_H + +/* Monitor error code */ +#define API_HAL_RET_VALUE_NS2S_CONVERSION_ERROR 0xFFFFFFFE +#define API_HAL_RET_VALUE_SERVICE_UNKNWON 0xFFFFFFFF + +/* HAL API error codes */ +#define API_HAL_RET_VALUE_OK 0x00 +#define API_HAL_RET_VALUE_FAIL 0x01 + +/* Secure HAL API flags */ +#define FLAG_START_CRITICAL 0x4 +#define FLAG_IRQFIQ_MASK 0x3 +#define FLAG_IRQ_ENABLE 0x2 +#define FLAG_FIQ_ENABLE 0x1 +#define NO_FLAG 0x0 + +/* Maximum Secure memory storage size */ +#define OMAP_SECURE_RAM_STORAGE (88 * SZ_1K) + +/* Secure low power HAL API index */ +#define OMAP4_HAL_SAVESECURERAM_INDEX 0x1a +#define OMAP4_HAL_SAVEHW_INDEX 0x1b +#define OMAP4_HAL_SAVEALL_INDEX 0x1c +#define OMAP4_HAL_SAVEGIC_INDEX 0x1d + +/* Secure Monitor mode APIs */ +#define OMAP4_MON_SCU_PWR_INDEX 0x108 +#define OMAP4_MON_L2X0_DBG_CTRL_INDEX 0x100 +#define OMAP4_MON_L2X0_CTRL_INDEX 0x102 +#define OMAP4_MON_L2X0_AUXCTRL_INDEX 0x109 +#define OMAP4_MON_L2X0_PREFETCH_INDEX 0x113 + +/* Secure PPA(Primary Protected Application) APIs */ +#define OMAP4_PPA_L2_POR_INDEX 0x23 +#define OMAP4_PPA_CPU_ACTRL_SMP_INDEX 0x25 + +#ifndef __ASSEMBLER__ + +extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs, + u32 arg1, u32 arg2, u32 arg3, u32 arg4); +extern u32 omap_smc2(u32 id, u32 falg, u32 pargs); +extern phys_addr_t omap_secure_ram_mempool_base(void); + +#endif /* __ASSEMBLER__ */ +#endif /* OMAP_ARCH_OMAP_SECURE_H */ diff --git a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h b/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h new file mode 100644 index 000000000000..d79321b0f2a2 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h @@ -0,0 +1,39 @@ +/* + * OMAP WakeupGen header file + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef OMAP_ARCH_WAKEUPGEN_H +#define OMAP_ARCH_WAKEUPGEN_H + +#define OMAP_WKG_CONTROL_0 0x00 +#define OMAP_WKG_ENB_A_0 0x10 +#define OMAP_WKG_ENB_B_0 0x14 +#define OMAP_WKG_ENB_C_0 0x18 +#define OMAP_WKG_ENB_D_0 0x1c +#define OMAP_WKG_ENB_SECURE_A_0 0x20 +#define OMAP_WKG_ENB_SECURE_B_0 0x24 +#define OMAP_WKG_ENB_SECURE_C_0 0x28 +#define OMAP_WKG_ENB_SECURE_D_0 0x2c +#define OMAP_WKG_ENB_A_1 0x410 +#define OMAP_WKG_ENB_B_1 0x414 +#define OMAP_WKG_ENB_C_1 0x418 +#define OMAP_WKG_ENB_D_1 0x41c +#define OMAP_WKG_ENB_SECURE_A_1 0x420 +#define OMAP_WKG_ENB_SECURE_B_1 0x424 +#define OMAP_WKG_ENB_SECURE_C_1 0x428 +#define OMAP_WKG_ENB_SECURE_D_1 0x42c +#define OMAP_AUX_CORE_BOOT_0 0x800 +#define OMAP_AUX_CORE_BOOT_1 0x804 +#define OMAP_PTMSYNCREQ_MASK 0xc00 +#define OMAP_PTMSYNCREQ_EN 0xc04 +#define OMAP_TIMESTAMPCYCLELO 0xc08 +#define OMAP_TIMESTAMPCYCLEHI 0xc0c + +extern int __init omap_wakeupgen_init(void); +#endif diff --git a/arch/arm/mach-omap2/include/mach/omap4-common.h b/arch/arm/mach-omap2/include/mach/omap4-common.h deleted file mode 100644 index e4bd87619734..000000000000 --- a/arch/arm/mach-omap2/include/mach/omap4-common.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * omap4-common.h: OMAP4 specific common header file - * - * Copyright (C) 2010 Texas Instruments, Inc. - * - * Author: - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef OMAP_ARCH_OMAP4_COMMON_H -#define OMAP_ARCH_OMAP4_COMMON_H - -/* - * wfi used in low power code. Directly opcode is used instead - * of instruction to avoid mulit-omap build break - */ -#ifdef CONFIG_THUMB2_KERNEL -#define do_wfi() __asm__ __volatile__ ("wfi" : : : "memory") -#else -#define do_wfi() \ - __asm__ __volatile__ (".word 0xe320f003" : : : "memory") -#endif - -#ifdef CONFIG_CACHE_L2X0 -extern void __iomem *l2cache_base; -#endif - -extern void __iomem *gic_dist_base_addr; - -extern void __init gic_init_irq(void); -extern void omap_smc1(u32 fn, u32 arg); - -#ifdef CONFIG_SMP -/* Needed for secondary core boot */ -extern void omap_secondary_startup(void); -extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); -extern void omap_auxcoreboot_addr(u32 cpu_addr); -extern u32 omap_read_auxcoreboot0(void); -#endif -#endif diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h deleted file mode 100644 index 866319947760..000000000000 --- a/arch/arm/mach-omap2/include/mach/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/vmalloc.h - * - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END 0xf8000000UL diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 25d20ced03e1..3f174d51f67f 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -35,7 +35,7 @@ #include "clock3xxx.h" #include "clock44xx.h" -#include <plat/common.h> +#include "common.h" #include <plat/omap-pm.h> #include "voltage.h" #include "powerdomain.h" @@ -43,7 +43,7 @@ #include "clockdomain.h" #include <plat/omap_hwmod.h> #include <plat/multi.h> -#include <plat/common.h> +#include "common.h" /* * The machine specific code may provide the extra mapping besides the @@ -176,14 +176,31 @@ static struct map_desc omap34xx_io_desc[] __initdata = { }; #endif -#ifdef CONFIG_SOC_OMAPTI816X -static struct map_desc omapti816x_io_desc[] __initdata = { +#ifdef CONFIG_SOC_OMAPTI81XX +static struct map_desc omapti81xx_io_desc[] __initdata = { + { + .virtual = L4_34XX_VIRT, + .pfn = __phys_to_pfn(L4_34XX_PHYS), + .length = L4_34XX_SIZE, + .type = MT_DEVICE + } +}; +#endif + +#ifdef CONFIG_SOC_OMAPAM33XX +static struct map_desc omapam33xx_io_desc[] __initdata = { { .virtual = L4_34XX_VIRT, .pfn = __phys_to_pfn(L4_34XX_PHYS), .length = L4_34XX_SIZE, .type = MT_DEVICE }, + { + .virtual = L4_WK_AM33XX_VIRT, + .pfn = __phys_to_pfn(L4_WK_AM33XX_PHYS), + .length = L4_WK_AM33XX_SIZE, + .type = MT_DEVICE + } }; #endif @@ -237,6 +254,15 @@ static struct map_desc omap44xx_io_desc[] __initdata = { .length = L4_EMU_44XX_SIZE, .type = MT_DEVICE, }, +#ifdef CONFIG_OMAP4_ERRATA_I688 + { + .virtual = OMAP4_SRAM_VA, + .pfn = __phys_to_pfn(OMAP4_SRAM_PA), + .length = PAGE_SIZE, + .type = MT_MEMORY_SO, + }, +#endif + }; #endif @@ -263,10 +289,17 @@ void __init omap34xx_map_common_io(void) } #endif -#ifdef CONFIG_SOC_OMAPTI816X -void __init omapti816x_map_common_io(void) +#ifdef CONFIG_SOC_OMAPTI81XX +void __init omapti81xx_map_common_io(void) { - iotable_init(omapti816x_io_desc, ARRAY_SIZE(omapti816x_io_desc)); + iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc)); +} +#endif + +#ifdef CONFIG_SOC_OMAPAM33XX +void __init omapam33xx_map_common_io(void) +{ + iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc)); } #endif @@ -316,13 +349,9 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); } -/* See irq.c, omap4-common.c and entry-macro.S */ -void __iomem *omap_irq_base; - static void __init omap_common_init_early(void) { omap2_check_revision(); - omap_ioremap_init(); omap_init_consistent_dma_size(); } @@ -422,9 +451,9 @@ void __init am35xx_init_early(void) omap3_init_early(); } -void __init ti816x_init_early(void) +void __init ti81xx_init_early(void) { - omap2_set_globals_ti816x(); + omap2_set_globals_ti81xx(); omap_common_init_early(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 65f1be6a182c..1fef061f7927 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -15,6 +15,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <mach/hardware.h> +#include <asm/exception.h> #include <asm/mach/irq.h> @@ -35,6 +36,11 @@ /* Number of IRQ state bits in each MIR register */ #define IRQ_BITS_PER_REG 32 +#define OMAP2_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE) +#define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE) +#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */ +#define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */ + /* * OMAP2 has a number of different interrupt controllers, each interrupt * controller is identified as its own "bank". Register definitions are @@ -143,6 +149,7 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) static void __init omap_init_irq(u32 base, int nr_irqs) { + void __iomem *omap_irq_base; unsigned long nr_of_irqs = 0; unsigned int nr_banks = 0; int i, j; @@ -186,11 +193,49 @@ void __init omap3_init_irq(void) omap_init_irq(OMAP34XX_IC_BASE, 96); } -void __init ti816x_init_irq(void) +void __init ti81xx_init_irq(void) { omap_init_irq(OMAP34XX_IC_BASE, 128); } +static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs *regs) +{ + u32 irqnr; + + do { + irqnr = readl_relaxed(base_addr + 0x98); + if (irqnr) + goto out; + + irqnr = readl_relaxed(base_addr + 0xb8); + if (irqnr) + goto out; + + irqnr = readl_relaxed(base_addr + 0xd8); +#ifdef CONFIG_SOC_OMAPTI816X + if (irqnr) + goto out; + irqnr = readl_relaxed(base_addr + 0xf8); +#endif + +out: + if (!irqnr) + break; + + irqnr = readl_relaxed(base_addr + INTCPS_SIR_IRQ_OFFSET); + irqnr &= ACTIVEIRQ_MASK; + + if (irqnr) + handle_IRQ(irqnr, regs); + } while (irqnr); +} + +asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs) +{ + void __iomem *base_addr = OMAP2_IRQ_BASE; + omap_intc_handle_irq(base_addr, regs); +} + #ifdef CONFIG_ARCH_OMAP3 static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)]; @@ -263,4 +308,10 @@ void omap3_intc_resume_idle(void) /* Re-enable autoidle */ intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG); } + +asmlinkage void __exception_irq_entry omap3_intc_handle_irq(struct pt_regs *regs) +{ + void __iomem *base_addr = OMAP3_IRQ_BASE; + omap_intc_handle_irq(base_addr, regs); +} #endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 292eee3be15f..28fcb27005d2 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -145,6 +145,9 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) pdata->reg_size = 4; pdata->has_ccr = true; } + pdata->set_clk_src = omap2_mcbsp_set_clk_src; + if (id == 1) + pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; if (oh->class->rev == MCBSP_CONFIG_TYPE3) { if (id == 2) @@ -174,9 +177,6 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) name, oh->name); return PTR_ERR(pdev); } - pdata->set_clk_src = omap2_mcbsp_set_clk_src; - if (id == 1) - pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; omap_mcbsp_count++; return 0; } diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 655e9480eb98..e1cc75d1a57a 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -32,6 +32,8 @@ #include <linux/debugfs.h> #include <linux/seq_file.h> #include <linux/uaccess.h> +#include <linux/irq.h> +#include <linux/interrupt.h> #include <asm/system.h> @@ -39,6 +41,7 @@ #include "control.h" #include "mux.h" +#include "prm.h" #define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ #define OMAP_MUX_BASE_SZ 0x5ca @@ -306,7 +309,8 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads) pad->idle = bpad->idle; pad->off = bpad->off; - if (pad->flags & OMAP_DEVICE_PAD_REMUX) + if (pad->flags & + (OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP)) nr_pads_dynamic++; pr_debug("%s: Initialized %s\n", __func__, pad->name); @@ -331,7 +335,8 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads) for (i = 0; i < hmux->nr_pads; i++) { struct omap_device_pad *pad = &hmux->pads[i]; - if (pad->flags & OMAP_DEVICE_PAD_REMUX) { + if (pad->flags & + (OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP)) { pr_debug("%s: pad %s tagged dynamic\n", __func__, pad->name); hmux->pads_dynamic[nr_pads_dynamic] = pad; @@ -351,6 +356,78 @@ err1: return NULL; } +/** + * omap_hwmod_mux_scan_wakeups - omap hwmod scan wakeup pads + * @hmux: Pads for a hwmod + * @mpu_irqs: MPU irq array for a hwmod + * + * Scans the wakeup status of pads for a single hwmod. If an irq + * array is defined for this mux, the parser will call the registered + * ISRs for corresponding pads, otherwise the parser will stop at the + * first wakeup active pad and return. Returns true if there is a + * pending and non-served wakeup event for the mux, otherwise false. + */ +static bool omap_hwmod_mux_scan_wakeups(struct omap_hwmod_mux_info *hmux, + struct omap_hwmod_irq_info *mpu_irqs) +{ + int i, irq; + unsigned int val; + u32 handled_irqs = 0; + + for (i = 0; i < hmux->nr_pads_dynamic; i++) { + struct omap_device_pad *pad = hmux->pads_dynamic[i]; + + if (!(pad->flags & OMAP_DEVICE_PAD_WAKEUP) || + !(pad->idle & OMAP_WAKEUP_EN)) + continue; + + val = omap_mux_read(pad->partition, pad->mux->reg_offset); + if (!(val & OMAP_WAKEUP_EVENT)) + continue; + + if (!hmux->irqs) + return true; + + irq = hmux->irqs[i]; + /* make sure we only handle each irq once */ + if (handled_irqs & 1 << irq) + continue; + + handled_irqs |= 1 << irq; + + generic_handle_irq(mpu_irqs[irq].irq); + } + + return false; +} + +/** + * _omap_hwmod_mux_handle_irq - Process wakeup events for a single hwmod + * + * Checks a single hwmod for every wakeup capable pad to see if there is an + * active wakeup event. If this is the case, call the corresponding ISR. + */ +static int _omap_hwmod_mux_handle_irq(struct omap_hwmod *oh, void *data) +{ + if (!oh->mux || !oh->mux->enabled) + return 0; + if (omap_hwmod_mux_scan_wakeups(oh->mux, oh->mpu_irqs)) + generic_handle_irq(oh->mpu_irqs[0].irq); + return 0; +} + +/** + * omap_hwmod_mux_handle_irq - Process pad wakeup irqs. + * + * Calls a function for each registered omap_hwmod to check + * pad wakeup statuses. + */ +static irqreturn_t omap_hwmod_mux_handle_irq(int irq, void *unused) +{ + omap_hwmod_for_each(_omap_hwmod_mux_handle_irq, NULL); + return IRQ_HANDLED; +} + /* Assumes the calling function takes care of locking */ void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state) { @@ -715,6 +792,7 @@ static void __init omap_mux_free_names(struct omap_mux *m) static int __init omap_mux_late_init(void) { struct omap_mux_partition *partition; + int ret; list_for_each_entry(partition, &mux_partitions, node) { struct omap_mux_entry *e, *tmp; @@ -735,6 +813,13 @@ static int __init omap_mux_late_init(void) } } + ret = request_irq(omap_prcm_event_to_irq("io"), + omap_hwmod_mux_handle_irq, IRQF_SHARED | IRQF_NO_SUSPEND, + "hwmod_io", omap_mux_late_init); + + if (ret) + pr_warning("mux: Failed to setup hwmod io irq %d\n", ret); + omap_mux_dbg_init(); return 0; diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 4ee6aeca885a..b13ef7ef5ef4 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -18,11 +18,6 @@ #include <linux/linkage.h> #include <linux/init.h> -/* Physical address needed since MMU not enabled yet on secondary core */ -#define OMAP4_AUX_CORE_BOOT1_PA 0x48281804 - - __INIT - /* * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index 4976b9393e49..adbe4d8c7caf 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -19,7 +19,10 @@ #include <linux/smp.h> #include <asm/cacheflush.h> -#include <mach/omap4-common.h> + +#include "common.h" + +#include "powerdomain.h" int platform_cpu_kill(unsigned int cpu) { @@ -32,6 +35,8 @@ int platform_cpu_kill(unsigned int cpu) */ void platform_cpu_die(unsigned int cpu) { + unsigned int this_cpu; + flush_cache_all(); dsb(); @@ -39,15 +44,15 @@ void platform_cpu_die(unsigned int cpu) * we're ready for shutdown now, so do it */ if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0) - printk(KERN_CRIT "Secure clear status failed\n"); + pr_err("Secure clear status failed\n"); for (;;) { /* - * Execute WFI + * Enter into low power state */ - do_wfi(); - - if (omap_read_auxcoreboot0() == cpu) { + omap4_hotplug_cpu(cpu, PWRDM_POWER_OFF); + this_cpu = smp_processor_id(); + if (omap_read_auxcoreboot0() == this_cpu) { /* * OK, proper wakeup, we're done */ diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c new file mode 100644 index 000000000000..1d5d01056558 --- /dev/null +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -0,0 +1,398 @@ +/* + * OMAP MPUSS low power code + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * OMAP4430 MPUSS mainly consists of dual Cortex-A9 with per-CPU + * Local timer and Watchdog, GIC, SCU, PL310 L2 cache controller, + * CPU0 and CPU1 LPRM modules. + * CPU0, CPU1 and MPUSS each have there own power domain and + * hence multiple low power combinations of MPUSS are possible. + * + * The CPU0 and CPU1 can't support Closed switch Retention (CSWR) + * because the mode is not supported by hw constraints of dormant + * mode. While waking up from the dormant mode, a reset signal + * to the Cortex-A9 processor must be asserted by the external + * power controller. + * + * With architectural inputs and hardware recommendations, only + * below modes are supported from power gain vs latency point of view. + * + * CPU0 CPU1 MPUSS + * ---------------------------------------------- + * ON ON ON + * ON(Inactive) OFF ON(Inactive) + * OFF OFF CSWR + * OFF OFF OSWR + * OFF OFF OFF(Device OFF *TBD) + * ---------------------------------------------- + * + * Note: CPU0 is the master core and it is the last CPU to go down + * and first to wake-up when MPUSS low power states are excercised + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/errno.h> +#include <linux/linkage.h> +#include <linux/smp.h> + +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> +#include <asm/smp_scu.h> +#include <asm/system.h> +#include <asm/pgalloc.h> +#include <asm/suspend.h> +#include <asm/hardware/cache-l2x0.h> + +#include <plat/omap44xx.h> + +#include "common.h" +#include "omap4-sar-layout.h" +#include "pm.h" +#include "prcm_mpu44xx.h" +#include "prminst44xx.h" +#include "prcm44xx.h" +#include "prm44xx.h" +#include "prm-regbits-44xx.h" + +#ifdef CONFIG_SMP + +struct omap4_cpu_pm_info { + struct powerdomain *pwrdm; + void __iomem *scu_sar_addr; + void __iomem *wkup_sar_addr; + void __iomem *l2x0_sar_addr; +}; + +static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info); +static struct powerdomain *mpuss_pd; +static void __iomem *sar_base; + +/* + * Program the wakeup routine address for the CPU0 and CPU1 + * used for OFF or DORMANT wakeup. + */ +static inline void set_cpu_wakeup_addr(unsigned int cpu_id, u32 addr) +{ + struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id); + + __raw_writel(addr, pm_info->wkup_sar_addr); +} + +/* + * Set the CPUx powerdomain's previous power state + */ +static inline void set_cpu_next_pwrst(unsigned int cpu_id, + unsigned int power_state) +{ + struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id); + + pwrdm_set_next_pwrst(pm_info->pwrdm, power_state); +} + +/* + * Read CPU's previous power state + */ +static inline unsigned int read_cpu_prev_pwrst(unsigned int cpu_id) +{ + struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id); + + return pwrdm_read_prev_pwrst(pm_info->pwrdm); +} + +/* + * Clear the CPUx powerdomain's previous power state + */ +static inline void clear_cpu_prev_pwrst(unsigned int cpu_id) +{ + struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id); + + pwrdm_clear_all_prev_pwrst(pm_info->pwrdm); +} + +/* + * Store the SCU power status value to scratchpad memory + */ +static void scu_pwrst_prepare(unsigned int cpu_id, unsigned int cpu_state) +{ + struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id); + u32 scu_pwr_st; + + switch (cpu_state) { + case PWRDM_POWER_RET: + scu_pwr_st = SCU_PM_DORMANT; + break; + case PWRDM_POWER_OFF: + scu_pwr_st = SCU_PM_POWEROFF; + break; + case PWRDM_POWER_ON: + case PWRDM_POWER_INACTIVE: + default: + scu_pwr_st = SCU_PM_NORMAL; + break; + } + + __raw_writel(scu_pwr_st, pm_info->scu_sar_addr); +} + +/* Helper functions for MPUSS OSWR */ +static inline void mpuss_clear_prev_logic_pwrst(void) +{ + u32 reg; + + reg = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, + OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET); + omap4_prminst_write_inst_reg(reg, OMAP4430_PRM_PARTITION, + OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET); +} + +static inline void cpu_clear_prev_logic_pwrst(unsigned int cpu_id) +{ + u32 reg; + + if (cpu_id) { + reg = omap4_prcm_mpu_read_inst_reg(OMAP4430_PRCM_MPU_CPU1_INST, + OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET); + omap4_prcm_mpu_write_inst_reg(reg, OMAP4430_PRCM_MPU_CPU1_INST, + OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET); + } else { + reg = omap4_prcm_mpu_read_inst_reg(OMAP4430_PRCM_MPU_CPU0_INST, + OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET); + omap4_prcm_mpu_write_inst_reg(reg, OMAP4430_PRCM_MPU_CPU0_INST, + OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET); + } +} + +/** + * omap4_mpuss_read_prev_context_state: + * Function returns the MPUSS previous context state + */ +u32 omap4_mpuss_read_prev_context_state(void) +{ + u32 reg; + + reg = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, + OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET); + reg &= OMAP4430_LOSTCONTEXT_DFF_MASK; + return reg; +} + +/* + * Store the CPU cluster state for L2X0 low power operations. + */ +static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state) +{ + struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id); + + __raw_writel(save_state, pm_info->l2x0_sar_addr); +} + +/* + * Save the L2X0 AUXCTRL and POR value to SAR memory. Its used to + * in every restore MPUSS OFF path. + */ +#ifdef CONFIG_CACHE_L2X0 +static void save_l2x0_context(void) +{ + u32 val; + void __iomem *l2x0_base = omap4_get_l2cache_base(); + + val = __raw_readl(l2x0_base + L2X0_AUX_CTRL); + __raw_writel(val, sar_base + L2X0_AUXCTRL_OFFSET); + val = __raw_readl(l2x0_base + L2X0_PREFETCH_CTRL); + __raw_writel(val, sar_base + L2X0_PREFETCH_CTRL_OFFSET); +} +#else +static void save_l2x0_context(void) +{} +#endif + +/** + * omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function + * The purpose of this function is to manage low power programming + * of OMAP4 MPUSS subsystem + * @cpu : CPU ID + * @power_state: Low power state. + * + * MPUSS states for the context save: + * save_state = + * 0 - Nothing lost and no need to save: MPUSS INACTIVE + * 1 - CPUx L1 and logic lost: MPUSS CSWR + * 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR + * 3 - CPUx L1 and logic lost + GIC + L2 lost: DEVICE OFF + */ +int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) +{ + unsigned int save_state = 0; + unsigned int wakeup_cpu; + + if (omap_rev() == OMAP4430_REV_ES1_0) + return -ENXIO; + + switch (power_state) { + case PWRDM_POWER_ON: + case PWRDM_POWER_INACTIVE: + save_state = 0; + break; + case PWRDM_POWER_OFF: + save_state = 1; + break; + case PWRDM_POWER_RET: + default: + /* + * CPUx CSWR is invalid hardware state. Also CPUx OSWR + * doesn't make much scense, since logic is lost and $L1 + * needs to be cleaned because of coherency. This makes + * CPUx OSWR equivalent to CPUX OFF and hence not supported + */ + WARN_ON(1); + return -ENXIO; + } + + pwrdm_pre_transition(); + + /* + * Check MPUSS next state and save interrupt controller if needed. + * In MPUSS OSWR or device OFF, interrupt controller contest is lost. + */ + mpuss_clear_prev_logic_pwrst(); + pwrdm_clear_all_prev_pwrst(mpuss_pd); + if ((pwrdm_read_next_pwrst(mpuss_pd) == PWRDM_POWER_RET) && + (pwrdm_read_logic_retst(mpuss_pd) == PWRDM_POWER_OFF)) + save_state = 2; + + clear_cpu_prev_pwrst(cpu); + cpu_clear_prev_logic_pwrst(cpu); + set_cpu_next_pwrst(cpu, power_state); + set_cpu_wakeup_addr(cpu, virt_to_phys(omap4_cpu_resume)); + scu_pwrst_prepare(cpu, power_state); + l2x0_pwrst_prepare(cpu, save_state); + + /* + * Call low level function with targeted low power state. + */ + cpu_suspend(save_state, omap4_finish_suspend); + + /* + * Restore the CPUx power state to ON otherwise CPUx + * power domain can transitions to programmed low power + * state while doing WFI outside the low powe code. On + * secure devices, CPUx does WFI which can result in + * domain transition + */ + wakeup_cpu = smp_processor_id(); + set_cpu_next_pwrst(wakeup_cpu, PWRDM_POWER_ON); + + pwrdm_post_transition(); + + return 0; +} + +/** + * omap4_hotplug_cpu: OMAP4 CPU hotplug entry + * @cpu : CPU ID + * @power_state: CPU low power state. + */ +int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) +{ + unsigned int cpu_state = 0; + + if (omap_rev() == OMAP4430_REV_ES1_0) + return -ENXIO; + + if (power_state == PWRDM_POWER_OFF) + cpu_state = 1; + + clear_cpu_prev_pwrst(cpu); + set_cpu_next_pwrst(cpu, power_state); + set_cpu_wakeup_addr(cpu, virt_to_phys(omap_secondary_startup)); + scu_pwrst_prepare(cpu, power_state); + + /* + * CPU never retuns back if targetted power state is OFF mode. + * CPU ONLINE follows normal CPU ONLINE ptah via + * omap_secondary_startup(). + */ + omap4_finish_suspend(cpu_state); + + set_cpu_next_pwrst(cpu, PWRDM_POWER_ON); + return 0; +} + + +/* + * Initialise OMAP4 MPUSS + */ +int __init omap4_mpuss_init(void) +{ + struct omap4_cpu_pm_info *pm_info; + + if (omap_rev() == OMAP4430_REV_ES1_0) { + WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); + return -ENODEV; + } + + sar_base = omap4_get_sar_ram_base(); + + /* Initilaise per CPU PM information */ + pm_info = &per_cpu(omap4_pm_info, 0x0); + pm_info->scu_sar_addr = sar_base + SCU_OFFSET0; + pm_info->wkup_sar_addr = sar_base + CPU0_WAKEUP_NS_PA_ADDR_OFFSET; + pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0; + pm_info->pwrdm = pwrdm_lookup("cpu0_pwrdm"); + if (!pm_info->pwrdm) { + pr_err("Lookup failed for CPU0 pwrdm\n"); + return -ENODEV; + } + + /* Clear CPU previous power domain state */ + pwrdm_clear_all_prev_pwrst(pm_info->pwrdm); + cpu_clear_prev_logic_pwrst(0); + + /* Initialise CPU0 power domain state to ON */ + pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON); + + pm_info = &per_cpu(omap4_pm_info, 0x1); + pm_info->scu_sar_addr = sar_base + SCU_OFFSET1; + pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET; + pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1; + pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm"); + if (!pm_info->pwrdm) { + pr_err("Lookup failed for CPU1 pwrdm\n"); + return -ENODEV; + } + + /* Clear CPU previous power domain state */ + pwrdm_clear_all_prev_pwrst(pm_info->pwrdm); + cpu_clear_prev_logic_pwrst(1); + + /* Initialise CPU1 power domain state to ON */ + pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON); + + mpuss_pd = pwrdm_lookup("mpu_pwrdm"); + if (!mpuss_pd) { + pr_err("Failed to lookup MPUSS power domain\n"); + return -ENODEV; + } + pwrdm_clear_all_prev_pwrst(mpuss_pd); + mpuss_clear_prev_logic_pwrst(); + + /* Save device type on scratchpad for low level code to use */ + if (omap_type() != OMAP2_DEVICE_TYPE_GP) + __raw_writel(1, sar_base + OMAP_TYPE_OFFSET); + else + __raw_writel(0, sar_base + OMAP_TYPE_OFFSET); + + save_l2x0_context(); + + return 0; +} + +#endif diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c new file mode 100644 index 000000000000..69f3c72d959b --- /dev/null +++ b/arch/arm/mach-omap2/omap-secure.c @@ -0,0 +1,81 @@ +/* + * OMAP Secure API infrastructure. + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * + * This program is free software,you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/memblock.h> + +#include <asm/cacheflush.h> + +#include <mach/omap-secure.h> + +static phys_addr_t omap_secure_memblock_base; + +/** + * omap_sec_dispatcher: Routine to dispatch low power secure + * service routines + * @idx: The HAL API index + * @flag: The flag indicating criticality of operation + * @nargs: Number of valid arguments out of four. + * @arg1, arg2, arg3 args4: Parameters passed to secure API + * + * Return the non-zero error value on failure. + */ +u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs, u32 arg1, u32 arg2, + u32 arg3, u32 arg4) +{ + u32 ret; + u32 param[5]; + + param[0] = nargs; + param[1] = arg1; + param[2] = arg2; + param[3] = arg3; + param[4] = arg4; + + /* + * Secure API needs physical address + * pointer for the parameters + */ + flush_cache_all(); + outer_clean_range(__pa(param), __pa(param + 5)); + ret = omap_smc2(idx, flag, __pa(param)); + + return ret; +} + +/* Allocate the memory to save secure ram */ +int __init omap_secure_ram_reserve_memblock(void) +{ + phys_addr_t paddr; + u32 size = OMAP_SECURE_RAM_STORAGE; + + size = ALIGN(size, SZ_1M); + paddr = memblock_alloc(size, SZ_1M); + if (!paddr) { + pr_err("%s: failed to reserve %x bytes\n", + __func__, size); + return -ENOMEM; + } + memblock_free(paddr, size); + memblock_remove(paddr, size); + + omap_secure_memblock_base = paddr; + + return 0; +} + +phys_addr_t omap_secure_ram_mempool_base(void) +{ + return omap_secure_memblock_base; +} diff --git a/arch/arm/mach-omap2/omap44xx-smc.S b/arch/arm/mach-omap2/omap-smc.S index e69d37d95204..f6441c13cd8c 100644 --- a/arch/arm/mach-omap2/omap44xx-smc.S +++ b/arch/arm/mach-omap2/omap-smc.S @@ -31,6 +31,29 @@ ENTRY(omap_smc1) ldmfd sp!, {r2-r12, pc} ENDPROC(omap_smc1) +/** + * u32 omap_smc2(u32 id, u32 falg, u32 pargs) + * Low level common routine for secure HAL and PPA APIs. + * @id: Application ID of HAL APIs + * @flag: Flag to indicate the criticality of operation + * @pargs: Physical address of parameter list starting + * with number of parametrs + */ +ENTRY(omap_smc2) + stmfd sp!, {r4-r12, lr} + mov r3, r2 + mov r2, r1 + mov r1, #0x0 @ Process ID + mov r6, #0xff + mov r12, #0x00 @ Secure Service ID + mov r7, #0 + mcr p15, 0, r7, c7, c5, 6 + dsb + dmb + smc #0 + ldmfd sp!, {r4-r12, pc} +ENDPROC(omap_smc2) + ENTRY(omap_modify_auxcoreboot0) stmfd sp!, {r1-r12, lr} ldr r12, =0x104 diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 4412ddb7b3f6..c1bf3ef0ba02 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -24,16 +24,37 @@ #include <asm/hardware/gic.h> #include <asm/smp_scu.h> #include <mach/hardware.h> -#include <mach/omap4-common.h> +#include <mach/omap-secure.h> + +#include "common.h" + +#include "clockdomain.h" /* SCU base address */ static void __iomem *scu_base; static DEFINE_SPINLOCK(boot_lock); +void __iomem *omap4_get_scu_base(void) +{ + return scu_base; +} + void __cpuinit platform_secondary_init(unsigned int cpu) { /* + * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device. + * OMAP44XX EMU/HS devices - CPU0 SMP bit access is enabled in PPA + * init and for CPU1, a secure PPA API provided. CPU0 must be ON + * while executing NS_SMP API on CPU1 and PPA version must be 1.4.0+. + * OMAP443X GP devices- SMP bit isn't accessible. + * OMAP446X GP devices - SMP bit access is enabled on both CPUs. + */ + if (cpu_is_omap443x() && (omap_type() != OMAP2_DEVICE_TYPE_GP)) + omap_secure_dispatcher(OMAP4_PPA_CPU_ACTRL_SMP_INDEX, + 4, 0, 0, 0, 0, 0); + + /* * If any interrupts are already enabled for the primary * core (e.g. timer irq), then they will not have been enabled * for us: do so @@ -49,6 +70,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu) int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) { + static struct clockdomain *cpu1_clkdm; + static bool booted; /* * Set synchronisation state between this boot processor * and the secondary one @@ -64,6 +87,29 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) omap_modify_auxcoreboot0(0x200, 0xfffffdff); flush_cache_all(); smp_wmb(); + + if (!cpu1_clkdm) + cpu1_clkdm = clkdm_lookup("mpu1_clkdm"); + + /* + * The SGI(Software Generated Interrupts) are not wakeup capable + * from low power states. This is known limitation on OMAP4 and + * needs to be worked around by using software forced clockdomain + * wake-up. To wakeup CPU1, CPU0 forces the CPU1 clockdomain to + * software force wakeup. The clockdomain is then put back to + * hardware supervised mode. + * More details can be found in OMAP4430 TRM - Version J + * Section : + * 4.3.4.2 Power States of CPU0 and CPU1 + */ + if (booted) { + clkdm_wakeup(cpu1_clkdm); + clkdm_allow_idle(cpu1_clkdm); + } else { + dsb_sev(); + booted = true; + } + gic_raise_softirq(cpumask_of(cpu), 1); /* diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c new file mode 100644 index 000000000000..d3d8971d7f30 --- /dev/null +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -0,0 +1,389 @@ +/* + * OMAP WakeupGen Source file + * + * OMAP WakeupGen is the interrupt controller extension used along + * with ARM GIC to wake the CPU out from low power states on + * external interrupts. It is responsible for generating wakeup + * event from the incoming interrupts and enable bits. It is + * implemented in MPU always ON power domain. During normal operation, + * WakeupGen delivers external interrupts directly to the GIC. + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/cpu.h> +#include <linux/notifier.h> +#include <linux/cpu_pm.h> + +#include <asm/hardware/gic.h> + +#include <mach/omap-wakeupgen.h> +#include <mach/omap-secure.h> + +#include "omap4-sar-layout.h" +#include "common.h" + +#define NR_REG_BANKS 4 +#define MAX_IRQS 128 +#define WKG_MASK_ALL 0x00000000 +#define WKG_UNMASK_ALL 0xffffffff +#define CPU_ENA_OFFSET 0x400 +#define CPU0_ID 0x0 +#define CPU1_ID 0x1 + +static void __iomem *wakeupgen_base; +static void __iomem *sar_base; +static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks); +static DEFINE_SPINLOCK(wakeupgen_lock); +static unsigned int irq_target_cpu[NR_IRQS]; + +/* + * Static helper functions. + */ +static inline u32 wakeupgen_readl(u8 idx, u32 cpu) +{ + return __raw_readl(wakeupgen_base + OMAP_WKG_ENB_A_0 + + (cpu * CPU_ENA_OFFSET) + (idx * 4)); +} + +static inline void wakeupgen_writel(u32 val, u8 idx, u32 cpu) +{ + __raw_writel(val, wakeupgen_base + OMAP_WKG_ENB_A_0 + + (cpu * CPU_ENA_OFFSET) + (idx * 4)); +} + +static inline void sar_writel(u32 val, u32 offset, u8 idx) +{ + __raw_writel(val, sar_base + offset + (idx * 4)); +} + +static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg) +{ + u8 i; + + for (i = 0; i < NR_REG_BANKS; i++) + wakeupgen_writel(reg, i, cpu); +} + +static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index) +{ + unsigned int spi_irq; + + /* + * PPIs and SGIs are not supported. + */ + if (irq < OMAP44XX_IRQ_GIC_START) + return -EINVAL; + + /* + * Subtract the GIC offset. + */ + spi_irq = irq - OMAP44XX_IRQ_GIC_START; + if (spi_irq > MAX_IRQS) { + pr_err("omap wakeupGen: Invalid IRQ%d\n", irq); + return -EINVAL; + } + + /* + * Each WakeupGen register controls 32 interrupt. + * i.e. 1 bit per SPI IRQ + */ + *reg_index = spi_irq >> 5; + *bit_posn = spi_irq %= 32; + + return 0; +} + +static void _wakeupgen_clear(unsigned int irq, unsigned int cpu) +{ + u32 val, bit_number; + u8 i; + + if (_wakeupgen_get_irq_info(irq, &bit_number, &i)) + return; + + val = wakeupgen_readl(i, cpu); + val &= ~BIT(bit_number); + wakeupgen_writel(val, i, cpu); +} + +static void _wakeupgen_set(unsigned int irq, unsigned int cpu) +{ + u32 val, bit_number; + u8 i; + + if (_wakeupgen_get_irq_info(irq, &bit_number, &i)) + return; + + val = wakeupgen_readl(i, cpu); + val |= BIT(bit_number); + wakeupgen_writel(val, i, cpu); +} + +static void _wakeupgen_save_masks(unsigned int cpu) +{ + u8 i; + + for (i = 0; i < NR_REG_BANKS; i++) + per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu); +} + +static void _wakeupgen_restore_masks(unsigned int cpu) +{ + u8 i; + + for (i = 0; i < NR_REG_BANKS; i++) + wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu); +} + +/* + * Architecture specific Mask extension + */ +static void wakeupgen_mask(struct irq_data *d) +{ + unsigned long flags; + + spin_lock_irqsave(&wakeupgen_lock, flags); + _wakeupgen_clear(d->irq, irq_target_cpu[d->irq]); + spin_unlock_irqrestore(&wakeupgen_lock, flags); +} + +/* + * Architecture specific Unmask extension + */ +static void wakeupgen_unmask(struct irq_data *d) +{ + unsigned long flags; + + spin_lock_irqsave(&wakeupgen_lock, flags); + _wakeupgen_set(d->irq, irq_target_cpu[d->irq]); + spin_unlock_irqrestore(&wakeupgen_lock, flags); +} + +/* + * Mask or unmask all interrupts on given CPU. + * 0 = Mask all interrupts on the 'cpu' + * 1 = Unmask all interrupts on the 'cpu' + * Ensure that the initial mask is maintained. This is faster than + * iterating through GIC registers to arrive at the correct masks. + */ +static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set) +{ + unsigned long flags; + + spin_lock_irqsave(&wakeupgen_lock, flags); + if (set) { + _wakeupgen_save_masks(cpu); + _wakeupgen_set_all(cpu, WKG_MASK_ALL); + } else { + _wakeupgen_set_all(cpu, WKG_UNMASK_ALL); + _wakeupgen_restore_masks(cpu); + } + spin_unlock_irqrestore(&wakeupgen_lock, flags); +} + +#ifdef CONFIG_CPU_PM +/* + * Save WakeupGen interrupt context in SAR BANK3. Restore is done by + * ROM code. WakeupGen IP is integrated along with GIC to manage the + * interrupt wakeups from CPU low power states. It manages + * masking/unmasking of Shared peripheral interrupts(SPI). So the + * interrupt enable/disable control should be in sync and consistent + * at WakeupGen and GIC so that interrupts are not lost. + */ +static void irq_save_context(void) +{ + u32 i, val; + + if (omap_rev() == OMAP4430_REV_ES1_0) + return; + + if (!sar_base) + sar_base = omap4_get_sar_ram_base(); + + for (i = 0; i < NR_REG_BANKS; i++) { + /* Save the CPUx interrupt mask for IRQ 0 to 127 */ + val = wakeupgen_readl(i, 0); + sar_writel(val, WAKEUPGENENB_OFFSET_CPU0, i); + val = wakeupgen_readl(i, 1); + sar_writel(val, WAKEUPGENENB_OFFSET_CPU1, i); + + /* + * Disable the secure interrupts for CPUx. The restore + * code blindly restores secure and non-secure interrupt + * masks from SAR RAM. Secure interrupts are not suppose + * to be enabled from HLOS. So overwrite the SAR location + * so that the secure interrupt remains disabled. + */ + sar_writel(0x0, WAKEUPGENENB_SECURE_OFFSET_CPU0, i); + sar_writel(0x0, WAKEUPGENENB_SECURE_OFFSET_CPU1, i); + } + + /* Save AuxBoot* registers */ + val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); + __raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET); + val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); + __raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET); + + /* Save SyncReq generation logic */ + val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); + __raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET); + val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); + __raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET); + + /* Save SyncReq generation logic */ + val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_MASK); + __raw_writel(val, sar_base + PTMSYNCREQ_MASK_OFFSET); + val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_EN); + __raw_writel(val, sar_base + PTMSYNCREQ_EN_OFFSET); + + /* Set the Backup Bit Mask status */ + val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET); + val |= SAR_BACKUP_STATUS_WAKEUPGEN; + __raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET); +} + +/* + * Clear WakeupGen SAR backup status. + */ +void irq_sar_clear(void) +{ + u32 val; + val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET); + val &= ~SAR_BACKUP_STATUS_WAKEUPGEN; + __raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET); +} + +/* + * Save GIC and Wakeupgen interrupt context using secure API + * for HS/EMU devices. + */ +static void irq_save_secure_context(void) +{ + u32 ret; + ret = omap_secure_dispatcher(OMAP4_HAL_SAVEGIC_INDEX, + FLAG_START_CRITICAL, + 0, 0, 0, 0, 0); + if (ret != API_HAL_RET_VALUE_OK) + pr_err("GIC and Wakeupgen context save failed\n"); +} +#endif + +#ifdef CONFIG_HOTPLUG_CPU +static int __cpuinit irq_cpu_hotplug_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned int)hcpu; + + switch (action) { + case CPU_ONLINE: + wakeupgen_irqmask_all(cpu, 0); + break; + case CPU_DEAD: + wakeupgen_irqmask_all(cpu, 1); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block __refdata irq_hotplug_notifier = { + .notifier_call = irq_cpu_hotplug_notify, +}; + +static void __init irq_hotplug_init(void) +{ + register_hotcpu_notifier(&irq_hotplug_notifier); +} +#else +static void __init irq_hotplug_init(void) +{} +#endif + +#ifdef CONFIG_CPU_PM +static int irq_notifier(struct notifier_block *self, unsigned long cmd, void *v) +{ + switch (cmd) { + case CPU_CLUSTER_PM_ENTER: + if (omap_type() == OMAP2_DEVICE_TYPE_GP) + irq_save_context(); + else + irq_save_secure_context(); + break; + case CPU_CLUSTER_PM_EXIT: + if (omap_type() == OMAP2_DEVICE_TYPE_GP) + irq_sar_clear(); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block irq_notifier_block = { + .notifier_call = irq_notifier, +}; + +static void __init irq_pm_init(void) +{ + cpu_pm_register_notifier(&irq_notifier_block); +} +#else +static void __init irq_pm_init(void) +{} +#endif + +/* + * Initialise the wakeupgen module. + */ +int __init omap_wakeupgen_init(void) +{ + int i; + unsigned int boot_cpu = smp_processor_id(); + + /* Not supported on OMAP4 ES1.0 silicon */ + if (omap_rev() == OMAP4430_REV_ES1_0) { + WARN(1, "WakeupGen: Not supported on OMAP4430 ES1.0\n"); + return -EPERM; + } + + /* Static mapping, never released */ + wakeupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K); + if (WARN_ON(!wakeupgen_base)) + return -ENOMEM; + + /* Clear all IRQ bitmasks at wakeupGen level */ + for (i = 0; i < NR_REG_BANKS; i++) { + wakeupgen_writel(0, i, CPU0_ID); + wakeupgen_writel(0, i, CPU1_ID); + } + + /* + * Override GIC architecture specific functions to add + * OMAP WakeupGen interrupt controller along with GIC + */ + gic_arch_extn.irq_mask = wakeupgen_mask; + gic_arch_extn.irq_unmask = wakeupgen_unmask; + gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE; + + /* + * FIXME: Add support to set_smp_affinity() once the core + * GIC code has necessary hooks in place. + */ + + /* Associate all the IRQs to boot CPU like GIC init does. */ + for (i = 0; i < NR_IRQS; i++) + irq_target_cpu[i] = boot_cpu; + + irq_hotplug_init(); + irq_pm_init(); + + return 0; +} diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 35ac3e5f6e94..bc16c818c6b7 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -15,24 +15,80 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/memblock.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> +#include <asm/mach/map.h> #include <plat/irqs.h> +#include <plat/sram.h> #include <mach/hardware.h> -#include <mach/omap4-common.h> +#include <mach/omap-wakeupgen.h> + +#include "common.h" +#include "omap4-sar-layout.h" #ifdef CONFIG_CACHE_L2X0 -void __iomem *l2cache_base; +static void __iomem *l2cache_base; #endif -void __iomem *gic_dist_base_addr; +static void __iomem *sar_ram_base; + +#ifdef CONFIG_OMAP4_ERRATA_I688 +/* Used to implement memory barrier on DRAM path */ +#define OMAP4_DRAM_BARRIER_VA 0xfe600000 + +void __iomem *dram_sync, *sram_sync; + +void omap_bus_sync(void) +{ + if (dram_sync && sram_sync) { + writel_relaxed(readl_relaxed(dram_sync), dram_sync); + writel_relaxed(readl_relaxed(sram_sync), sram_sync); + isb(); + } +} + +static int __init omap_barriers_init(void) +{ + struct map_desc dram_io_desc[1]; + phys_addr_t paddr; + u32 size; + + if (!cpu_is_omap44xx()) + return -ENODEV; + size = ALIGN(PAGE_SIZE, SZ_1M); + paddr = memblock_alloc(size, SZ_1M); + if (!paddr) { + pr_err("%s: failed to reserve 4 Kbytes\n", __func__); + return -ENOMEM; + } + memblock_free(paddr, size); + memblock_remove(paddr, size); + dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA; + dram_io_desc[0].pfn = __phys_to_pfn(paddr); + dram_io_desc[0].length = size; + dram_io_desc[0].type = MT_MEMORY_SO; + iotable_init(dram_io_desc, ARRAY_SIZE(dram_io_desc)); + dram_sync = (void __iomem *) dram_io_desc[0].virtual; + sram_sync = (void __iomem *) OMAP4_SRAM_VA; + + pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n", + (long long) paddr, dram_io_desc[0].virtual); + + return 0; +} +core_initcall(omap_barriers_init); +#endif void __init gic_init_irq(void) { + void __iomem *omap_irq_base; + void __iomem *gic_dist_base_addr; + /* Static mapping, never released */ gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); BUG_ON(!gic_dist_base_addr); @@ -41,11 +97,18 @@ void __init gic_init_irq(void) omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); BUG_ON(!omap_irq_base); + omap_wakeupgen_init(); + gic_init(0, 29, gic_dist_base_addr, omap_irq_base); } #ifdef CONFIG_CACHE_L2X0 +void __iomem *omap4_get_l2cache_base(void) +{ + return l2cache_base; +} + static void omap4_l2x0_disable(void) { /* Disable PL310 L2 Cache controller */ @@ -71,7 +134,8 @@ static int __init omap_l2_cache_init(void) /* Static mapping, never released */ l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K); - BUG_ON(!l2cache_base); + if (WARN_ON(!l2cache_base)) + return -ENOMEM; /* * 16-way associativity, parity disabled @@ -111,3 +175,30 @@ static int __init omap_l2_cache_init(void) } early_initcall(omap_l2_cache_init); #endif + +void __iomem *omap4_get_sar_ram_base(void) +{ + return sar_ram_base; +} + +/* + * SAR RAM used to save and restore the HW + * context in low power modes + */ +static int __init omap4_sar_ram_init(void) +{ + /* + * To avoid code running on other OMAPs in + * multi-omap builds + */ + if (!cpu_is_omap44xx()) + return -ENOMEM; + + /* Static mapping, never released */ + sar_ram_base = ioremap(OMAP44XX_SAR_RAM_BASE, SZ_16K); + if (WARN_ON(!sar_ram_base)) + return -ENOMEM; + + return 0; +} +early_initcall(omap4_sar_ram_init); diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h new file mode 100644 index 000000000000..fe5b545ad443 --- /dev/null +++ b/arch/arm/mach-omap2/omap4-sar-layout.h @@ -0,0 +1,50 @@ +/* + * omap4-sar-layout.h: OMAP4 SAR RAM layout header file + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef OMAP_ARCH_OMAP4_SAR_LAYOUT_H +#define OMAP_ARCH_OMAP4_SAR_LAYOUT_H + +/* + * SAR BANK offsets from base address OMAP44XX_SAR_RAM_BASE + */ +#define SAR_BANK1_OFFSET 0x0000 +#define SAR_BANK2_OFFSET 0x1000 +#define SAR_BANK3_OFFSET 0x2000 +#define SAR_BANK4_OFFSET 0x3000 + +/* Scratch pad memory offsets from SAR_BANK1 */ +#define SCU_OFFSET0 0xd00 +#define SCU_OFFSET1 0xd04 +#define OMAP_TYPE_OFFSET 0xd10 +#define L2X0_SAVE_OFFSET0 0xd14 +#define L2X0_SAVE_OFFSET1 0xd18 +#define L2X0_AUXCTRL_OFFSET 0xd1c +#define L2X0_PREFETCH_CTRL_OFFSET 0xd20 + +/* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */ +#define CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xa04 +#define CPU1_WAKEUP_NS_PA_ADDR_OFFSET 0xa08 + +#define SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x500) +#define SAR_SECURE_RAM_SIZE_OFFSET (SAR_BANK3_OFFSET + 0x504) +#define SAR_SECRAM_SAVED_AT_OFFSET (SAR_BANK3_OFFSET + 0x508) + +/* WakeUpGen save restore offset from OMAP44XX_SAR_RAM_BASE */ +#define WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x684) +#define WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x694) +#define WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x6a4) +#define WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x6b4) +#define AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0x6c4) +#define AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x6c8) +#define PTMSYNCREQ_MASK_OFFSET (SAR_BANK3_OFFSET + 0x6cc) +#define PTMSYNCREQ_EN_OFFSET (SAR_BANK3_OFFSET + 0x6d0) +#define SAR_BACKUP_STATUS_WAKEUPGEN 0x10 + +#endif diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 207a2ff9a8c4..5192cabb40ed 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -136,8 +136,9 @@ #include <linux/list.h> #include <linux/mutex.h> #include <linux/spinlock.h> +#include <linux/slab.h> -#include <plat/common.h> +#include "common.h" #include <plat/cpu.h> #include "clockdomain.h" #include "powerdomain.h" @@ -381,6 +382,51 @@ static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle, } /** + * _set_idle_ioring_wakeup - enable/disable IO pad wakeup on hwmod idle for mux + * @oh: struct omap_hwmod * + * @set_wake: bool value indicating to set (true) or clear (false) wakeup enable + * + * Set or clear the I/O pad wakeup flag in the mux entries for the + * hwmod @oh. This function changes the @oh->mux->pads_dynamic array + * in memory. If the hwmod is currently idled, and the new idle + * values don't match the previous ones, this function will also + * update the SCM PADCTRL registers. Otherwise, if the hwmod is not + * currently idled, this function won't touch the hardware: the new + * mux settings are written to the SCM PADCTRL registers when the + * hwmod is idled. No return value. + */ +static void _set_idle_ioring_wakeup(struct omap_hwmod *oh, bool set_wake) +{ + struct omap_device_pad *pad; + bool change = false; + u16 prev_idle; + int j; + + if (!oh->mux || !oh->mux->enabled) + return; + + for (j = 0; j < oh->mux->nr_pads_dynamic; j++) { + pad = oh->mux->pads_dynamic[j]; + + if (!(pad->flags & OMAP_DEVICE_PAD_WAKEUP)) + continue; + + prev_idle = pad->idle; + + if (set_wake) + pad->idle |= OMAP_WAKEUP_EN; + else + pad->idle &= ~OMAP_WAKEUP_EN; + + if (prev_idle != pad->idle) + change = true; + } + + if (change && oh->_state == _HWMOD_STATE_IDLE) + omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE); +} + +/** * _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware * @oh: struct omap_hwmod * * @@ -706,27 +752,65 @@ static void _enable_module(struct omap_hwmod *oh) } /** - * _disable_module - enable CLKCTRL modulemode on OMAP4 + * _omap4_wait_target_disable - wait for a module to be disabled on OMAP4 + * @oh: struct omap_hwmod * + * + * Wait for a module @oh to enter slave idle. Returns 0 if the module + * does not have an IDLEST bit or if the module successfully enters + * slave idle; otherwise, pass along the return value of the + * appropriate *_cm*_wait_module_idle() function. + */ +static int _omap4_wait_target_disable(struct omap_hwmod *oh) +{ + if (!cpu_is_omap44xx()) + return 0; + + if (!oh) + return -EINVAL; + + if (oh->_int_flags & _HWMOD_NO_MPU_PORT) + return 0; + + if (oh->flags & HWMOD_NO_IDLEST) + return 0; + + return omap4_cminst_wait_module_idle(oh->clkdm->prcm_partition, + oh->clkdm->cm_inst, + oh->clkdm->clkdm_offs, + oh->prcm.omap4.clkctrl_offs); +} + +/** + * _omap4_disable_module - enable CLKCTRL modulemode on OMAP4 * @oh: struct omap_hwmod * * * Disable the PRCM module mode related to the hwmod @oh. - * No return value. + * Return EINVAL if the modulemode is not supported and 0 in case of success. */ -static void _disable_module(struct omap_hwmod *oh) +static int _omap4_disable_module(struct omap_hwmod *oh) { + int v; + /* The module mode does not exist prior OMAP4 */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - return; + if (!cpu_is_omap44xx()) + return -EINVAL; if (!oh->clkdm || !oh->prcm.omap4.modulemode) - return; + return -EINVAL; - pr_debug("omap_hwmod: %s: _disable_module\n", oh->name); + pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__); omap4_cminst_module_disable(oh->clkdm->prcm_partition, oh->clkdm->cm_inst, oh->clkdm->clkdm_offs, oh->prcm.omap4.clkctrl_offs); + + v = _omap4_wait_target_disable(oh); + if (v) + pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", + oh->name); + + return 0; } /** @@ -1153,36 +1237,6 @@ static int _wait_target_ready(struct omap_hwmod *oh) } /** - * _wait_target_disable - wait for a module to be disabled - * @oh: struct omap_hwmod * - * - * Wait for a module @oh to enter slave idle. Returns 0 if the module - * does not have an IDLEST bit or if the module successfully enters - * slave idle; otherwise, pass along the return value of the - * appropriate *_cm*_wait_module_idle() function. - */ -static int _wait_target_disable(struct omap_hwmod *oh) -{ - /* TODO: For now just handle OMAP4+ */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - return 0; - - if (!oh) - return -EINVAL; - - if (oh->_int_flags & _HWMOD_NO_MPU_PORT) - return 0; - - if (oh->flags & HWMOD_NO_IDLEST) - return 0; - - return omap4_cminst_wait_module_idle(oh->clkdm->prcm_partition, - oh->clkdm->cm_inst, - oh->clkdm->clkdm_offs, - oh->prcm.omap4.clkctrl_offs); -} - -/** * _lookup_hardreset - fill register bit info for this hwmod/reset line * @oh: struct omap_hwmod * * @name: name of the reset line in the context of this hwmod @@ -1441,6 +1495,25 @@ static int _enable(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: enabling\n", oh->name); + /* + * hwmods with HWMOD_INIT_NO_IDLE flag set are left + * in enabled state at init. + * Now that someone is really trying to enable them, + * just ensure that the hwmod mux is set. + */ + if (oh->_int_flags & _HWMOD_SKIP_ENABLE) { + /* + * If the caller has mux data populated, do the mux'ing + * which wouldn't have been done as part of the _enable() + * done during setup. + */ + if (oh->mux) + omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED); + + oh->_int_flags &= ~_HWMOD_SKIP_ENABLE; + return 0; + } + if (oh->_state != _HWMOD_STATE_INITIALIZED && oh->_state != _HWMOD_STATE_IDLE && oh->_state != _HWMOD_STATE_DISABLED) { @@ -1524,8 +1597,6 @@ static int _enable(struct omap_hwmod *oh) */ static int _idle(struct omap_hwmod *oh) { - int ret; - pr_debug("omap_hwmod: %s: idling\n", oh->name); if (oh->_state != _HWMOD_STATE_ENABLED) { @@ -1537,11 +1608,9 @@ static int _idle(struct omap_hwmod *oh) if (oh->class->sysc) _idle_sysc(oh); _del_initiator_dep(oh, mpu_oh); - _disable_module(oh); - ret = _wait_target_disable(oh); - if (ret) - pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", - oh->name); + + _omap4_disable_module(oh); + /* * The module must be in idle mode before disabling any parents * clocks. Otherwise, the parent clock might be disabled before @@ -1642,11 +1711,7 @@ static int _shutdown(struct omap_hwmod *oh) if (oh->_state == _HWMOD_STATE_ENABLED) { _del_initiator_dep(oh, mpu_oh); /* XXX what about the other system initiators here? dma, dsp */ - _disable_module(oh); - ret = _wait_target_disable(oh); - if (ret) - pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", - oh->name); + _omap4_disable_module(oh); _disable_clocks(oh); if (oh->clkdm) clkdm_hwmod_disable(oh->clkdm, oh); @@ -1744,8 +1809,10 @@ static int _setup(struct omap_hwmod *oh, void *data) * it should be set by the core code as a runtime flag during startup */ if ((oh->flags & HWMOD_INIT_NO_IDLE) && - (postsetup_state == _HWMOD_STATE_IDLE)) + (postsetup_state == _HWMOD_STATE_IDLE)) { + oh->_int_flags |= _HWMOD_SKIP_ENABLE; postsetup_state = _HWMOD_STATE_ENABLED; + } if (postsetup_state == _HWMOD_STATE_IDLE) _idle(oh); @@ -2416,6 +2483,7 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh) v = oh->_sysc_cache; _enable_wakeup(oh, &v); _write_sysconfig(v, oh); + _set_idle_ioring_wakeup(oh, true); spin_unlock_irqrestore(&oh->_lock, flags); return 0; @@ -2446,6 +2514,7 @@ int omap_hwmod_disable_wakeup(struct omap_hwmod *oh) v = oh->_sysc_cache; _disable_wakeup(oh, &v); _write_sysconfig(v, oh); + _set_idle_ioring_wakeup(oh, false); spin_unlock_irqrestore(&oh->_lock, flags); return 0; @@ -2662,3 +2731,57 @@ int omap_hwmod_no_setup_reset(struct omap_hwmod *oh) return 0; } + +/** + * omap_hwmod_pad_route_irq - route an I/O pad wakeup to a particular MPU IRQ + * @oh: struct omap_hwmod * containing hwmod mux entries + * @pad_idx: array index in oh->mux of the hwmod mux entry to route wakeup + * @irq_idx: the hwmod mpu_irqs array index of the IRQ to trigger on wakeup + * + * When an I/O pad wakeup arrives for the dynamic or wakeup hwmod mux + * entry number @pad_idx for the hwmod @oh, trigger the interrupt + * service routine for the hwmod's mpu_irqs array index @irq_idx. If + * this function is not called for a given pad_idx, then the ISR + * associated with @oh's first MPU IRQ will be triggered when an I/O + * pad wakeup occurs on that pad. Note that @pad_idx is the index of + * the _dynamic or wakeup_ entry: if there are other entries not + * marked with OMAP_DEVICE_PAD_WAKEUP or OMAP_DEVICE_PAD_REMUX, these + * entries are NOT COUNTED in the dynamic pad index. This function + * must be called separately for each pad that requires its interrupt + * to be re-routed this way. Returns -EINVAL if there is an argument + * problem or if @oh does not have hwmod mux entries or MPU IRQs; + * returns -ENOMEM if memory cannot be allocated; or 0 upon success. + * + * XXX This function interface is fragile. Rather than using array + * indexes, which are subject to unpredictable change, it should be + * using hwmod IRQ names, and some other stable key for the hwmod mux + * pad records. + */ +int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx) +{ + int nr_irqs; + + might_sleep(); + + if (!oh || !oh->mux || !oh->mpu_irqs || pad_idx < 0 || + pad_idx >= oh->mux->nr_pads_dynamic) + return -EINVAL; + + /* Check the number of available mpu_irqs */ + for (nr_irqs = 0; oh->mpu_irqs[nr_irqs].irq >= 0; nr_irqs++) + ; + + if (irq_idx >= nr_irqs) + return -EINVAL; + + if (!oh->mux->irqs) { + /* XXX What frees this? */ + oh->mux->irqs = kzalloc(sizeof(int) * oh->mux->nr_pads_dynamic, + GFP_KERNEL); + if (!oh->mux->irqs) + return -ENOMEM; + } + oh->mux->irqs[pad_idx] = irq_idx; + + return 0; +} diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 7f8915ad5099..5324e8d93bc0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -84,6 +84,8 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod; static struct omap_hwmod omap3xxx_mcbsp5_hwmod; static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod; static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod; +static struct omap_hwmod omap3xxx_usb_host_hs_hwmod; +static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod; /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = { @@ -164,6 +166,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod; static struct omap_hwmod omap3xxx_uart2_hwmod; static struct omap_hwmod omap3xxx_uart3_hwmod; static struct omap_hwmod omap3xxx_uart4_hwmod; +static struct omap_hwmod am35xx_uart4_hwmod; static struct omap_hwmod omap3xxx_usbhsotg_hwmod; /* l3_core -> usbhsotg interface */ @@ -299,6 +302,23 @@ static struct omap_hwmod_ocp_if omap3_l4_per__uart4 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* AM35xx: L4 CORE -> UART4 interface */ +static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = { + { + .pa_start = OMAP3_UART4_AM35XX_BASE, + .pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &am35xx_uart4_hwmod, + .clk = "uart4_ick", + .addr = am35xx_uart4_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* L4 CORE -> I2C1 interface */ static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = { .master = &omap3xxx_l4_core_hwmod, @@ -1162,6 +1182,7 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = { SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -1309,6 +1330,39 @@ static struct omap_hwmod omap3xxx_uart4_hwmod = { .class = &omap2_uart_class, }; +static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = { + { .irq = INT_35XX_UART4_IRQ, }, +}; + +static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = { + { .name = "rx", .dma_req = AM35XX_DMA_UART4_RX, }, + { .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, }, +}; + +static struct omap_hwmod_ocp_if *am35xx_uart4_slaves[] = { + &am35xx_l4_core__uart4, +}; + +static struct omap_hwmod am35xx_uart4_hwmod = { + .name = "uart4", + .mpu_irqs = am35xx_uart4_mpu_irqs, + .sdma_reqs = am35xx_uart4_sdma_reqs, + .main_clk = "uart4_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_UART4_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_EN_UART4_SHIFT, + }, + }, + .slaves = am35xx_uart4_slaves, + .slaves_cnt = ARRAY_SIZE(am35xx_uart4_slaves), + .class = &omap2_uart_class, +}; + + static struct omap_hwmod_class i2c_class = { .name = "i2c", .sysc = &i2c_sysc, @@ -1636,7 +1690,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c1_slaves[] = { static struct omap_hwmod omap3xxx_i2c1_hwmod = { .name = "i2c1", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap2_i2c1_mpu_irqs, .sdma_reqs = omap2_i2c1_sdma_reqs, .main_clk = "i2c1_fck", @@ -1670,7 +1724,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c2_slaves[] = { static struct omap_hwmod omap3xxx_i2c2_hwmod = { .name = "i2c2", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap2_i2c2_mpu_irqs, .sdma_reqs = omap2_i2c2_sdma_reqs, .main_clk = "i2c2_fck", @@ -1715,7 +1769,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c3_slaves[] = { static struct omap_hwmod omap3xxx_i2c3_hwmod = { .name = "i2c3", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = i2c3_mpu_irqs, .sdma_reqs = i2c3_sdma_reqs, .main_clk = "i2c3_fck", @@ -3072,7 +3126,35 @@ static struct omap_mmc_dev_attr mmc1_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; -static struct omap_hwmod omap3xxx_mmc1_hwmod = { +/* See 35xx errata 2.1.1.128 in SPRZ278F */ +static struct omap_mmc_dev_attr mmc1_pre_es3_dev_attr = { + .flags = (OMAP_HSMMC_SUPPORTS_DUAL_VOLT | + OMAP_HSMMC_BROKEN_MULTIBLOCK_READ), +}; + +static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = { + .name = "mmc1", + .mpu_irqs = omap34xx_mmc1_mpu_irqs, + .sdma_reqs = omap34xx_mmc1_sdma_reqs, + .opt_clks = omap34xx_mmc1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc1_opt_clks), + .main_clk = "mmchs1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MMC1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT, + }, + }, + .dev_attr = &mmc1_pre_es3_dev_attr, + .slaves = omap3xxx_mmc1_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves), + .class = &omap34xx_mmc_class, +}; + +static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = { .name = "mmc1", .mpu_irqs = omap34xx_mmc1_mpu_irqs, .sdma_reqs = omap34xx_mmc1_sdma_reqs, @@ -3115,7 +3197,34 @@ static struct omap_hwmod_ocp_if *omap3xxx_mmc2_slaves[] = { &omap3xxx_l4_core__mmc2, }; -static struct omap_hwmod omap3xxx_mmc2_hwmod = { +/* See 35xx errata 2.1.1.128 in SPRZ278F */ +static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = { + .flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ, +}; + +static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = { + .name = "mmc2", + .mpu_irqs = omap34xx_mmc2_mpu_irqs, + .sdma_reqs = omap34xx_mmc2_sdma_reqs, + .opt_clks = omap34xx_mmc2_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc2_opt_clks), + .main_clk = "mmchs2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MMC2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT, + }, + }, + .dev_attr = &mmc2_pre_es3_dev_attr, + .slaves = omap3xxx_mmc2_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc2_slaves), + .class = &omap34xx_mmc_class, +}; + +static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = { .name = "mmc2", .mpu_irqs = omap34xx_mmc2_mpu_irqs, .sdma_reqs = omap34xx_mmc2_sdma_reqs, @@ -3177,13 +3286,223 @@ static struct omap_hwmod omap3xxx_mmc3_hwmod = { .class = &omap34xx_mmc_class, }; +/* + * 'usb_host_hs' class + * high-speed multi-port usb host controller + */ +static struct omap_hwmod_ocp_if omap3xxx_usb_host_hs__l3_main_2 = { + .master = &omap3xxx_usb_host_hs_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "core_l3_ick", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = { + .name = "usb_host_hs", + .sysc = &omap3xxx_usb_host_hs_sysc, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_masters[] = { + &omap3xxx_usb_host_hs__l3_main_2, +}; + +static struct omap_hwmod_addr_space omap3xxx_usb_host_hs_addrs[] = { + { + .name = "uhh", + .pa_start = 0x48064000, + .pa_end = 0x480643ff, + .flags = ADDR_TYPE_RT + }, + { + .name = "ohci", + .pa_start = 0x48064400, + .pa_end = 0x480647ff, + }, + { + .name = "ehci", + .pa_start = 0x48064800, + .pa_end = 0x48064cff, + }, + {} +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_host_hs = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_usb_host_hs_hwmod, + .clk = "usbhost_ick", + .addr = omap3xxx_usb_host_hs_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_slaves[] = { + &omap3xxx_l4_core__usb_host_hs, +}; + +static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = { + { .role = "ehci_logic_fck", .clk = "usbhost_120m_fck", }, +}; + +static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = { + { .name = "ohci-irq", .irq = 76 }, + { .name = "ehci-irq", .irq = 77 }, + { .irq = -1 } +}; + +static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = { + .name = "usb_host_hs", + .class = &omap3xxx_usb_host_hs_hwmod_class, + .clkdm_name = "l3_init_clkdm", + .mpu_irqs = omap3xxx_usb_host_hs_irqs, + .main_clk = "usbhost_48m_fck", + .prcm = { + .omap2 = { + .module_offs = OMAP3430ES2_USBHOST_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430ES2_EN_USBHOST1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430ES2_ST_USBHOST_IDLE_SHIFT, + .idlest_stdby_bit = OMAP3430ES2_ST_USBHOST_STDBY_SHIFT, + }, + }, + .opt_clks = omap3xxx_usb_host_hs_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_opt_clks), + .slaves = omap3xxx_usb_host_hs_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_slaves), + .masters = omap3xxx_usb_host_hs_masters, + .masters_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_masters), + + /* + * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock + * id: i660 + * + * Description: + * In the following configuration : + * - USBHOST module is set to smart-idle mode + * - PRCM asserts idle_req to the USBHOST module ( This typically + * happens when the system is going to a low power mode : all ports + * have been suspended, the master part of the USBHOST module has + * entered the standby state, and SW has cut the functional clocks) + * - an USBHOST interrupt occurs before the module is able to answer + * idle_ack, typically a remote wakeup IRQ. + * Then the USB HOST module will enter a deadlock situation where it + * is no more accessible nor functional. + * + * Workaround: + * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE + */ + + /* + * Errata: USB host EHCI may stall when entering smart-standby mode + * Id: i571 + * + * Description: + * When the USBHOST module is set to smart-standby mode, and when it is + * ready to enter the standby state (i.e. all ports are suspended and + * all attached devices are in suspend mode), then it can wrongly assert + * the Mstandby signal too early while there are still some residual OCP + * transactions ongoing. If this condition occurs, the internal state + * machine may go to an undefined state and the USB link may be stuck + * upon the next resume. + * + * Workaround: + * Don't use smart standby; use only force standby, + * hence HWMOD_SWSUP_MSTANDBY + */ + + /* + * During system boot; If the hwmod framework resets the module + * the module will have smart idle settings; which can lead to deadlock + * (above Errata Id:i660); so, dont reset the module during boot; + * Use HWMOD_INIT_NO_RESET. + */ + + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY | + HWMOD_INIT_NO_RESET, +}; + +/* + * 'usb_tll_hs' class + * usb_tll_hs module is the adapter on the usb_host_hs ports + */ +static struct omap_hwmod_class_sysconfig omap3xxx_usb_tll_hs_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = { + .name = "usb_tll_hs", + .sysc = &omap3xxx_usb_tll_hs_sysc, +}; + +static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = { + { .name = "tll-irq", .irq = 78 }, + { .irq = -1 } +}; + +static struct omap_hwmod_addr_space omap3xxx_usb_tll_hs_addrs[] = { + { + .name = "tll", + .pa_start = 0x48062000, + .pa_end = 0x48062fff, + .flags = ADDR_TYPE_RT + }, + {} +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_tll_hs = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_usb_tll_hs_hwmod, + .clk = "usbtll_ick", + .addr = omap3xxx_usb_tll_hs_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_usb_tll_hs_slaves[] = { + &omap3xxx_l4_core__usb_tll_hs, +}; + +static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = { + .name = "usb_tll_hs", + .class = &omap3xxx_usb_tll_hs_hwmod_class, + .clkdm_name = "l3_init_clkdm", + .mpu_irqs = omap3xxx_usb_tll_hs_irqs, + .main_clk = "usbtll_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 3, + .module_bit = OMAP3430ES2_EN_USBTLL_SHIFT, + .idlest_reg_id = 3, + .idlest_idle_bit = OMAP3430ES2_ST_USBTLL_SHIFT, + }, + }, + .slaves = omap3xxx_usb_tll_hs_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_usb_tll_hs_slaves), +}; + static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_l3_main_hwmod, &omap3xxx_l4_core_hwmod, &omap3xxx_l4_per_hwmod, &omap3xxx_l4_wkup_hwmod, - &omap3xxx_mmc1_hwmod, - &omap3xxx_mmc2_hwmod, &omap3xxx_mmc3_hwmod, &omap3xxx_mpu_hwmod, @@ -3198,12 +3517,12 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_timer9_hwmod, &omap3xxx_timer10_hwmod, &omap3xxx_timer11_hwmod, - &omap3xxx_timer12_hwmod, &omap3xxx_wd_timer2_hwmod, &omap3xxx_uart1_hwmod, &omap3xxx_uart2_hwmod, &omap3xxx_uart3_hwmod, + /* dss class */ &omap3xxx_dss_dispc_hwmod, &omap3xxx_dss_dsi1_hwmod, @@ -3245,20 +3564,38 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { NULL, }; +/* GP-only hwmods */ +static __initdata struct omap_hwmod *omap3xxx_gp_hwmods[] = { + &omap3xxx_timer12_hwmod, + NULL +}; + /* 3430ES1-only hwmods */ static __initdata struct omap_hwmod *omap3430es1_hwmods[] = { - &omap3xxx_iva_hwmod, &omap3430es1_dss_core_hwmod, - &omap3xxx_mailbox_hwmod, NULL }; /* 3430ES2+-only hwmods */ static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = { - &omap3xxx_iva_hwmod, &omap3xxx_dss_core_hwmod, &omap3xxx_usbhsotg_hwmod, - &omap3xxx_mailbox_hwmod, + &omap3xxx_usb_host_hs_hwmod, + &omap3xxx_usb_tll_hs_hwmod, + NULL +}; + +/* <= 3430ES3-only hwmods */ +static struct omap_hwmod *omap3430_pre_es3_hwmods[] __initdata = { + &omap3xxx_pre_es3_mmc1_hwmod, + &omap3xxx_pre_es3_mmc2_hwmod, + NULL +}; + +/* 3430ES3+-only hwmods */ +static struct omap_hwmod *omap3430_es3plus_hwmods[] __initdata = { + &omap3xxx_es3plus_mmc1_hwmod, + &omap3xxx_es3plus_mmc2_hwmod, NULL }; @@ -3280,12 +3617,21 @@ static __initdata struct omap_hwmod *omap36xx_hwmods[] = { &omap36xx_sr2_hwmod, &omap3xxx_usbhsotg_hwmod, &omap3xxx_mailbox_hwmod, + &omap3xxx_usb_host_hs_hwmod, + &omap3xxx_usb_tll_hs_hwmod, + &omap3xxx_es3plus_mmc1_hwmod, + &omap3xxx_es3plus_mmc2_hwmod, NULL }; static __initdata struct omap_hwmod *am35xx_hwmods[] = { &omap3xxx_dss_core_hwmod, /* XXX ??? */ &am35xx_usbhsotg_hwmod, + &am35xx_uart4_hwmod, + &omap3xxx_usb_host_hs_hwmod, + &omap3xxx_usb_tll_hs_hwmod, + &omap3xxx_es3plus_mmc1_hwmod, + &omap3xxx_es3plus_mmc2_hwmod, NULL }; @@ -3300,6 +3646,13 @@ int __init omap3xxx_hwmod_init(void) if (r < 0) return r; + /* Register GP-only hwmods. */ + if (omap_type() == OMAP2_DEVICE_TYPE_GP) { + r = omap_hwmod_register(omap3xxx_gp_hwmods); + if (r < 0) + return r; + } + rev = omap_rev(); /* @@ -3338,6 +3691,21 @@ int __init omap3xxx_hwmod_init(void) h = omap3430es2plus_hwmods; }; + if (h) { + r = omap_hwmod_register(h); + if (r < 0) + return r; + } + + h = NULL; + if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 || + rev == OMAP3430_REV_ES2_1) { + h = omap3430_pre_es3_hwmods; + } else if (rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 || + rev == OMAP3430_REV_ES3_1_2) { + h = omap3430_es3plus_hwmods; + }; + if (h) r = omap_hwmod_register(h); diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index daaf165af696..f9f151081760 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -70,6 +70,8 @@ static struct omap_hwmod omap44xx_mmc2_hwmod; static struct omap_hwmod omap44xx_mpu_hwmod; static struct omap_hwmod omap44xx_mpu_private_hwmod; static struct omap_hwmod omap44xx_usb_otg_hs_hwmod; +static struct omap_hwmod omap44xx_usb_host_hs_hwmod; +static struct omap_hwmod omap44xx_usb_tll_hs_hwmod; /* * Interconnects omap_hwmod structures @@ -2246,6 +2248,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_i2c_sysc = { SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -2300,7 +2303,7 @@ static struct omap_hwmod omap44xx_i2c1_hwmod = { .name = "i2c1", .class = &omap44xx_i2c_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_i2c1_irqs, .sdma_reqs = omap44xx_i2c1_sdma_reqs, .main_clk = "i2c1_fck", @@ -2356,7 +2359,7 @@ static struct omap_hwmod omap44xx_i2c2_hwmod = { .name = "i2c2", .class = &omap44xx_i2c_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_i2c2_irqs, .sdma_reqs = omap44xx_i2c2_sdma_reqs, .main_clk = "i2c2_fck", @@ -2412,7 +2415,7 @@ static struct omap_hwmod omap44xx_i2c3_hwmod = { .name = "i2c3", .class = &omap44xx_i2c_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_i2c3_irqs, .sdma_reqs = omap44xx_i2c3_sdma_reqs, .main_clk = "i2c3_fck", @@ -2468,7 +2471,7 @@ static struct omap_hwmod omap44xx_i2c4_hwmod = { .name = "i2c4", .class = &omap44xx_i2c_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_i2c4_irqs, .sdma_reqs = omap44xx_i2c4_sdma_reqs, .main_clk = "i2c4_fck", @@ -5276,6 +5279,207 @@ static struct omap_hwmod omap44xx_wd_timer3_hwmod = { .slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer3_slaves), }; +/* + * 'usb_host_hs' class + * high-speed multi-port usb host controller + */ +static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = { + .master = &omap44xx_usb_host_hs_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = { + .name = "usb_host_hs", + .sysc = &omap44xx_usb_host_hs_sysc, +}; + +static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_masters[] = { + &omap44xx_usb_host_hs__l3_main_2, +}; + +static struct omap_hwmod_addr_space omap44xx_usb_host_hs_addrs[] = { + { + .name = "uhh", + .pa_start = 0x4a064000, + .pa_end = 0x4a0647ff, + .flags = ADDR_TYPE_RT + }, + { + .name = "ohci", + .pa_start = 0x4a064800, + .pa_end = 0x4a064bff, + }, + { + .name = "ehci", + .pa_start = 0x4a064c00, + .pa_end = 0x4a064fff, + }, + {} +}; + +static struct omap_hwmod_irq_info omap44xx_usb_host_hs_irqs[] = { + { .name = "ohci-irq", .irq = 76 + OMAP44XX_IRQ_GIC_START }, + { .name = "ehci-irq", .irq = 77 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } +}; + +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_usb_host_hs_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_usb_host_hs_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_slaves[] = { + &omap44xx_l4_cfg__usb_host_hs, +}; + +static struct omap_hwmod omap44xx_usb_host_hs_hwmod = { + .name = "usb_host_hs", + .class = &omap44xx_usb_host_hs_hwmod_class, + .clkdm_name = "l3_init_clkdm", + .main_clk = "usb_host_hs_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .mpu_irqs = omap44xx_usb_host_hs_irqs, + .slaves = omap44xx_usb_host_hs_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_usb_host_hs_slaves), + .masters = omap44xx_usb_host_hs_masters, + .masters_cnt = ARRAY_SIZE(omap44xx_usb_host_hs_masters), + + /* + * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock + * id: i660 + * + * Description: + * In the following configuration : + * - USBHOST module is set to smart-idle mode + * - PRCM asserts idle_req to the USBHOST module ( This typically + * happens when the system is going to a low power mode : all ports + * have been suspended, the master part of the USBHOST module has + * entered the standby state, and SW has cut the functional clocks) + * - an USBHOST interrupt occurs before the module is able to answer + * idle_ack, typically a remote wakeup IRQ. + * Then the USB HOST module will enter a deadlock situation where it + * is no more accessible nor functional. + * + * Workaround: + * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE + */ + + /* + * Errata: USB host EHCI may stall when entering smart-standby mode + * Id: i571 + * + * Description: + * When the USBHOST module is set to smart-standby mode, and when it is + * ready to enter the standby state (i.e. all ports are suspended and + * all attached devices are in suspend mode), then it can wrongly assert + * the Mstandby signal too early while there are still some residual OCP + * transactions ongoing. If this condition occurs, the internal state + * machine may go to an undefined state and the USB link may be stuck + * upon the next resume. + * + * Workaround: + * Don't use smart standby; use only force standby, + * hence HWMOD_SWSUP_MSTANDBY + */ + + /* + * During system boot; If the hwmod framework resets the module + * the module will have smart idle settings; which can lead to deadlock + * (above Errata Id:i660); so, dont reset the module during boot; + * Use HWMOD_INIT_NO_RESET. + */ + + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY | + HWMOD_INIT_NO_RESET, +}; + +/* + * 'usb_tll_hs' class + * usb_tll_hs module is the adapter on the usb_host_hs ports + */ +static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = { + .name = "usb_tll_hs", + .sysc = &omap44xx_usb_tll_hs_sysc, +}; + +static struct omap_hwmod_irq_info omap44xx_usb_tll_hs_irqs[] = { + { .name = "tll-irq", .irq = 78 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } +}; + +static struct omap_hwmod_addr_space omap44xx_usb_tll_hs_addrs[] = { + { + .name = "tll", + .pa_start = 0x4a062000, + .pa_end = 0x4a063fff, + .flags = ADDR_TYPE_RT + }, + {} +}; + +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_usb_tll_hs_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_usb_tll_hs_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap44xx_usb_tll_hs_slaves[] = { + &omap44xx_l4_cfg__usb_tll_hs, +}; + +static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = { + .name = "usb_tll_hs", + .class = &omap44xx_usb_tll_hs_hwmod_class, + .clkdm_name = "l3_init_clkdm", + .main_clk = "usb_tll_hs_ick", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, + .mpu_irqs = omap44xx_usb_tll_hs_irqs, + .slaves = omap44xx_usb_tll_hs_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_usb_tll_hs_slaves), +}; + static __initdata struct omap_hwmod *omap44xx_hwmods[] = { /* dmm class */ @@ -5415,13 +5619,16 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { &omap44xx_uart3_hwmod, &omap44xx_uart4_hwmod, + /* usb host class */ + &omap44xx_usb_host_hs_hwmod, + &omap44xx_usb_tll_hs_hwmod, + /* usb_otg_hs class */ &omap44xx_usb_otg_hs_hwmod, /* wd_timer class */ &omap44xx_wd_timer2_hwmod, &omap44xx_wd_timer3_hwmod, - NULL, }; diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 58775e3c8476..4c90477e6f82 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -260,3 +260,38 @@ void am35x_set_mode(u8 musb_mode) omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); } + +void ti81xx_musb_phy_power(u8 on) +{ + void __iomem *scm_base = NULL; + u32 usbphycfg; + + scm_base = ioremap(TI81XX_SCM_BASE, SZ_2K); + if (!scm_base) { + pr_err("system control module ioremap failed\n"); + return; + } + + usbphycfg = __raw_readl(scm_base + USBCTRL0); + + if (on) { + if (cpu_is_ti816x()) { + usbphycfg |= TI816X_USBPHY0_NORMAL_MODE; + usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC; + } else if (cpu_is_ti814x()) { + usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN + | USBPHY_DPINPUT | USBPHY_DMINPUT); + usbphycfg |= (USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN + | USBPHY_DPOPBUFCTL | USBPHY_DMOPBUFCTL); + } + } else { + if (cpu_is_ti816x()) + usbphycfg &= ~TI816X_USBPHY0_NORMAL_MODE; + else if (cpu_is_ti814x()) + usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN; + + } + __raw_writel(usbphycfg, scm_base + USBCTRL0); + + iounmap(scm_base); +} diff --git a/arch/arm/mach-omap2/opp2xxx.h b/arch/arm/mach-omap2/opp2xxx.h index 8affc66a92c2..8fae534eb157 100644 --- a/arch/arm/mach-omap2/opp2xxx.h +++ b/arch/arm/mach-omap2/opp2xxx.h @@ -51,7 +51,7 @@ struct prcm_config { unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */ unsigned long cm_clksel_mdm; /* modem dividers 2430 only */ unsigned long base_sdrc_rfr; /* base refresh timing for a set */ - unsigned char flags; + unsigned short flags; }; diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 00bff46ca48b..1881fe915149 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -18,7 +18,7 @@ #include <plat/omap-pm.h> #include <plat/omap_device.h> -#include <plat/common.h> +#include "common.h" #include "voltage.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 4e166add2f35..b737b11e4499 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -21,6 +21,7 @@ extern void omap_sram_idle(void); extern int omap3_can_sleep(void); extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state); extern int omap3_idle_init(void); +extern int omap4_idle_init(void); #if defined(CONFIG_PM_OPP) extern int omap3_opp_init(void); diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index cf0c216132ab..b8822f8b2891 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -30,7 +30,6 @@ #include <linux/irq.h> #include <linux/time.h> #include <linux/gpio.h> -#include <linux/console.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> @@ -42,6 +41,7 @@ #include <plat/dma.h> #include <plat/board.h> +#include "common.h" #include "prm2xxx_3xxx.h" #include "prm-regbits-24xx.h" #include "cm2xxx_3xxx.h" @@ -126,27 +126,11 @@ static void omap2_enter_full_retention(void) if (omap_irq_pending()) goto no_sleep; - /* Block console output in case it is on one of the OMAP UARTs */ - if (!is_suspending()) - if (!console_trylock()) - goto no_sleep; - - omap_uart_prepare_idle(0); - omap_uart_prepare_idle(1); - omap_uart_prepare_idle(2); - /* Jump to SRAM suspend code */ omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL), OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL), OMAP_SDRC_REGADDR(SDRC_POWER)); - omap_uart_resume_idle(2); - omap_uart_resume_idle(1); - omap_uart_resume_idle(0); - - if (!is_suspending()) - console_unlock(); - no_sleep: omap2_gpio_resume_after_idle(); @@ -238,8 +222,6 @@ static int omap2_can_sleep(void) { if (omap2_fclks_active()) return 0; - if (!omap_uart_can_sleep()) - return 0; if (osc_ck->usecount > 1) return 0; if (omap_dma_running()) @@ -290,7 +272,6 @@ static int omap2_pm_suspend(void) mir1 = omap_readl(0x480fe0a4); omap_writel(1 << 5, 0x480fe0ac); - omap_uart_prepare_suspend(); omap2_enter_full_retention(); omap_writel(mir1, 0x480fe0a4); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index efa66494c1e3..fc6987578920 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -28,7 +28,6 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/slab.h> -#include <linux/console.h> #include <trace/events/power.h> #include <asm/suspend.h> @@ -36,12 +35,12 @@ #include <plat/sram.h> #include "clockdomain.h" #include "powerdomain.h" -#include <plat/serial.h> #include <plat/sdrc.h> #include <plat/prcm.h> #include <plat/gpmc.h> #include <plat/dma.h> +#include "common.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" #include "prm-regbits-34xx.h" @@ -53,15 +52,6 @@ #ifdef CONFIG_SUSPEND static suspend_state_t suspend_state = PM_SUSPEND_ON; -static inline bool is_suspending(void) -{ - return (suspend_state != PM_SUSPEND_ON) && console_suspend_enabled; -} -#else -static inline bool is_suspending(void) -{ - return false; -} #endif /* pm34xx errata defined in pm.h */ @@ -194,7 +184,7 @@ static void omap3_save_secure_ram_context(void) * that any peripheral wake-up events occurring while attempting to * clear the PM_WKST_x are detected and cleared. */ -static int prcm_clear_mod_irqs(s16 module, u8 regs) +static int prcm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits) { u32 wkst, fclk, iclk, clken; u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1; @@ -206,6 +196,7 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs) wkst = omap2_prm_read_mod_reg(module, wkst_off); wkst &= omap2_prm_read_mod_reg(module, grpsel_off); + wkst &= ~ignore_bits; if (wkst) { iclk = omap2_cm_read_mod_reg(module, iclk_off); fclk = omap2_cm_read_mod_reg(module, fclk_off); @@ -221,6 +212,7 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs) omap2_cm_set_mod_reg_bits(clken, module, fclk_off); omap2_prm_write_mod_reg(wkst, module, wkst_off); wkst = omap2_prm_read_mod_reg(module, wkst_off); + wkst &= ~ignore_bits; c++; } omap2_cm_write_mod_reg(iclk, module, iclk_off); @@ -230,76 +222,35 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs) return c; } -static int _prcm_int_handle_wakeup(void) +static irqreturn_t _prcm_int_handle_io(int irq, void *unused) { int c; - c = prcm_clear_mod_irqs(WKUP_MOD, 1); - c += prcm_clear_mod_irqs(CORE_MOD, 1); - c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1); - if (omap_rev() > OMAP3430_REV_ES1_0) { - c += prcm_clear_mod_irqs(CORE_MOD, 3); - c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1); - } + c = prcm_clear_mod_irqs(WKUP_MOD, 1, + ~(OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK)); - return c; + return c ? IRQ_HANDLED : IRQ_NONE; } -/* - * PRCM Interrupt Handler - * - * The PRM_IRQSTATUS_MPU register indicates if there are any pending - * interrupts from the PRCM for the MPU. These bits must be cleared in - * order to clear the PRCM interrupt. The PRCM interrupt handler is - * implemented to simply clear the PRM_IRQSTATUS_MPU in order to clear - * the PRCM interrupt. Please note that bit 0 of the PRM_IRQSTATUS_MPU - * register indicates that a wake-up event is pending for the MPU and - * this bit can only be cleared if the all the wake-up events latched - * in the various PM_WKST_x registers have been cleared. The interrupt - * handler is implemented using a do-while loop so that if a wake-up - * event occurred during the processing of the prcm interrupt handler - * (setting a bit in the corresponding PM_WKST_x register and thus - * preventing us from clearing bit 0 of the PRM_IRQSTATUS_MPU register) - * this would be handled. - */ -static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) +static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused) { - u32 irqenable_mpu, irqstatus_mpu; - int c = 0; - - irqenable_mpu = omap2_prm_read_mod_reg(OCP_MOD, - OMAP3_PRM_IRQENABLE_MPU_OFFSET); - irqstatus_mpu = omap2_prm_read_mod_reg(OCP_MOD, - OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - irqstatus_mpu &= irqenable_mpu; - - do { - if (irqstatus_mpu & (OMAP3430_WKUP_ST_MASK | - OMAP3430_IO_ST_MASK)) { - c = _prcm_int_handle_wakeup(); - - /* - * Is the MPU PRCM interrupt handler racing with the - * IVA2 PRCM interrupt handler ? - */ - WARN(c == 0, "prcm: WARNING: PRCM indicated MPU wakeup " - "but no wakeup sources are marked\n"); - } else { - /* XXX we need to expand our PRCM interrupt handler */ - WARN(1, "prcm: WARNING: PRCM interrupt received, but " - "no code to handle it (%08x)\n", irqstatus_mpu); - } - - omap2_prm_write_mod_reg(irqstatus_mpu, OCP_MOD, - OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - - irqstatus_mpu = omap2_prm_read_mod_reg(OCP_MOD, - OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - irqstatus_mpu &= irqenable_mpu; + int c; - } while (irqstatus_mpu); + /* + * Clear all except ST_IO and ST_IO_CHAIN for wkup module, + * these are handled in a separate handler to avoid acking + * IO events before parsing in mux code + */ + c = prcm_clear_mod_irqs(WKUP_MOD, 1, + OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK); + c += prcm_clear_mod_irqs(CORE_MOD, 1, 0); + c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0); + if (omap_rev() > OMAP3430_REV_ES1_0) { + c += prcm_clear_mod_irqs(CORE_MOD, 3, 0); + c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0); + } - return IRQ_HANDLED; + return c ? IRQ_HANDLED : IRQ_NONE; } static void omap34xx_save_context(u32 *save) @@ -375,20 +326,11 @@ void omap_sram_idle(void) omap3_enable_io_chain(); } - /* Block console output in case it is on one of the OMAP UARTs */ - if (!is_suspending()) - if (per_next_state < PWRDM_POWER_ON || - core_next_state < PWRDM_POWER_ON) - if (!console_trylock()) - goto console_still_active; - pwrdm_pre_transition(); /* PER */ if (per_next_state < PWRDM_POWER_ON) { per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; - omap_uart_prepare_idle(2); - omap_uart_prepare_idle(3); omap2_gpio_prepare_for_idle(per_going_off); if (per_next_state == PWRDM_POWER_OFF) omap3_per_save_context(); @@ -396,8 +338,6 @@ void omap_sram_idle(void) /* CORE */ if (core_next_state < PWRDM_POWER_ON) { - omap_uart_prepare_idle(0); - omap_uart_prepare_idle(1); if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_cm_save_context(); @@ -446,8 +386,6 @@ void omap_sram_idle(void) omap3_sram_restore_context(); omap2_sms_restore_context(); } - omap_uart_resume_idle(0); - omap_uart_resume_idle(1); if (core_next_state == PWRDM_POWER_OFF) omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, OMAP3430_GR_MOD, @@ -463,14 +401,8 @@ void omap_sram_idle(void) omap2_gpio_resume_after_idle(); if (per_prev_state == PWRDM_POWER_OFF) omap3_per_restore_context(); - omap_uart_resume_idle(2); - omap_uart_resume_idle(3); } - if (!is_suspending()) - console_unlock(); - -console_still_active: /* Disable IO-PAD and IO-CHAIN wakeup */ if (omap3_has_io_wakeup() && (per_next_state < PWRDM_POWER_ON || @@ -484,21 +416,11 @@ console_still_active: clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]); } -int omap3_can_sleep(void) -{ - if (!omap_uart_can_sleep()) - return 0; - return 1; -} - static void omap3_pm_idle(void) { local_irq_disable(); local_fiq_disable(); - if (!omap3_can_sleep()) - goto out; - if (omap_irq_pending() || need_resched()) goto out; @@ -532,7 +454,6 @@ static int omap3_pm_suspend(void) goto restore; } - omap_uart_prepare_suspend(); omap3_intc_suspend(); omap_sram_idle(); @@ -579,22 +500,27 @@ static int omap3_pm_begin(suspend_state_t state) { disable_hlt(); suspend_state = state; - omap_uart_enable_irqs(0); + omap_prcm_irq_prepare(); return 0; } static void omap3_pm_end(void) { suspend_state = PM_SUSPEND_ON; - omap_uart_enable_irqs(1); enable_hlt(); return; } +static void omap3_pm_finish(void) +{ + omap_prcm_irq_complete(); +} + static const struct platform_suspend_ops omap_pm_ops = { .begin = omap3_pm_begin, .end = omap3_pm_end, .enter = omap3_pm_enter, + .finish = omap3_pm_finish, .valid = suspend_valid_only_mem, }; #endif /* CONFIG_SUSPEND */ @@ -700,10 +626,6 @@ static void __init prcm_setup_regs(void) OMAP3430_GRPSEL_GPT1_MASK | OMAP3430_GRPSEL_GPT12_MASK, WKUP_MOD, OMAP3430_PM_MPUGRPSEL); - /* For some reason IO doesn't generate wakeup event even if - * it is selected to mpu wakeup goup */ - omap2_prm_write_mod_reg(OMAP3430_IO_EN_MASK | OMAP3430_WKUP_EN_MASK, - OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); /* Enable PM_WKEN to support DSS LPR */ omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK, @@ -880,12 +802,21 @@ static int __init omap3_pm_init(void) * supervised mode for powerdomains */ prcm_setup_regs(); - ret = request_irq(INT_34XX_PRCM_MPU_IRQ, - (irq_handler_t)prcm_interrupt_handler, - IRQF_DISABLED, "prcm", NULL); + ret = request_irq(omap_prcm_event_to_irq("wkup"), + _prcm_int_handle_wakeup, IRQF_NO_SUSPEND, "pm_wkup", NULL); + + if (ret) { + pr_err("pm: Failed to request pm_wkup irq\n"); + goto err1; + } + + /* IO interrupt is shared with mux code */ + ret = request_irq(omap_prcm_event_to_irq("io"), + _prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io", + omap3_pm_init); + if (ret) { - printk(KERN_ERR "request_irq failed to register for 0x%x\n", - INT_34XX_PRCM_MPU_IRQ); + pr_err("pm: Failed to request pm_io irq\n"); goto err1; } diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 59a870be8390..c264ef7219c1 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -1,8 +1,9 @@ /* * OMAP4 Power Management Routines * - * Copyright (C) 2010 Texas Instruments, Inc. + * Copyright (C) 2010-2011 Texas Instruments, Inc. * Rajendra Nayak <rnayak@ti.com> + * Santosh Shilimkar <santosh.shilimkar@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,14 +17,17 @@ #include <linux/err.h> #include <linux/slab.h> +#include "common.h" +#include "clockdomain.h" #include "powerdomain.h" -#include <mach/omap4-common.h> +#include "pm.h" struct power_state { struct powerdomain *pwrdm; u32 next_state; #ifdef CONFIG_SUSPEND u32 saved_state; + u32 saved_logic_state; #endif struct list_head node; }; @@ -33,7 +37,50 @@ static LIST_HEAD(pwrst_list); #ifdef CONFIG_SUSPEND static int omap4_pm_suspend(void) { - do_wfi(); + struct power_state *pwrst; + int state, ret = 0; + u32 cpu_id = smp_processor_id(); + + /* Save current powerdomain state */ + list_for_each_entry(pwrst, &pwrst_list, node) { + pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm); + pwrst->saved_logic_state = pwrdm_read_logic_retst(pwrst->pwrdm); + } + + /* Set targeted power domain states by suspend */ + list_for_each_entry(pwrst, &pwrst_list, node) { + omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); + pwrdm_set_logic_retst(pwrst->pwrdm, PWRDM_POWER_OFF); + } + + /* + * For MPUSS to hit power domain retention(CSWR or OSWR), + * CPU0 and CPU1 power domains need to be in OFF or DORMANT state, + * since CPU power domain CSWR is not supported by hardware + * Only master CPU follows suspend path. All other CPUs follow + * CPU hotplug path in system wide suspend. On OMAP4, CPU power + * domain CSWR is not supported by hardware. + * More details can be found in OMAP4430 TRM section 4.3.4.2. + */ + omap4_enter_lowpower(cpu_id, PWRDM_POWER_OFF); + + /* Restore next powerdomain state */ + list_for_each_entry(pwrst, &pwrst_list, node) { + state = pwrdm_read_prev_pwrst(pwrst->pwrdm); + if (state > pwrst->next_state) { + pr_info("Powerdomain (%s) didn't enter " + "target state %d\n", + pwrst->pwrdm->name, pwrst->next_state); + ret = -1; + } + omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); + pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->saved_logic_state); + } + if (ret) + pr_crit("Could not enter target state in pm_suspend\n"); + else + pr_info("Successfully put all powerdomains to target state\n"); + return 0; } @@ -73,6 +120,22 @@ static const struct platform_suspend_ops omap_pm_ops = { }; #endif /* CONFIG_SUSPEND */ +/* + * Enable hardware supervised mode for all clockdomains if it's + * supported. Initiate sleep transition for other clockdomains, if + * they are not used + */ +static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) +{ + if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) + clkdm_allow_idle(clkdm); + else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && + atomic_read(&clkdm->usecount) == 0) + clkdm_sleep(clkdm); + return 0; +} + + static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) { struct power_state *pwrst; @@ -80,14 +143,48 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) if (!pwrdm->pwrsts) return 0; + /* + * Skip CPU0 and CPU1 power domains. CPU1 is programmed + * through hotplug path and CPU0 explicitly programmed + * further down in the code path + */ + if (!strncmp(pwrdm->name, "cpu", 3)) + return 0; + + /* + * FIXME: Remove this check when core retention is supported + * Only MPUSS power domain is added in the list. + */ + if (strcmp(pwrdm->name, "mpu_pwrdm")) + return 0; + pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC); if (!pwrst) return -ENOMEM; + pwrst->pwrdm = pwrdm; - pwrst->next_state = PWRDM_POWER_ON; + pwrst->next_state = PWRDM_POWER_RET; list_add(&pwrst->node, &pwrst_list); - return pwrdm_set_next_pwrst(pwrst->pwrdm, pwrst->next_state); + return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); +} + +/** + * omap_default_idle - OMAP4 default ilde routine.' + * + * Implements OMAP4 memory, IO ordering requirements which can't be addressed + * with default arch_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and + * by secondary CPU with CONFIG_CPUIDLE. + */ +static void omap_default_idle(void) +{ + local_irq_disable(); + local_fiq_disable(); + + omap_do_wfi(); + + local_fiq_enable(); + local_irq_enable(); } /** @@ -99,10 +196,17 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) static int __init omap4_pm_init(void) { int ret; + struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm; + struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm; if (!cpu_is_omap44xx()) return -ENODEV; + if (omap_rev() == OMAP4430_REV_ES1_0) { + WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); + return -ENODEV; + } + pr_err("Power Management for TI OMAP4.\n"); ret = pwrdm_for_each(pwrdms_setup, NULL); @@ -111,10 +215,51 @@ static int __init omap4_pm_init(void) goto err2; } + /* + * The dynamic dependency between MPUSS -> MEMIF and + * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as + * expected. The hardware recommendation is to enable static + * dependencies for these to avoid system lock ups or random crashes. + */ + mpuss_clkdm = clkdm_lookup("mpuss_clkdm"); + emif_clkdm = clkdm_lookup("l3_emif_clkdm"); + l3_1_clkdm = clkdm_lookup("l3_1_clkdm"); + l3_2_clkdm = clkdm_lookup("l3_2_clkdm"); + l4_per_clkdm = clkdm_lookup("l4_per_clkdm"); + ducati_clkdm = clkdm_lookup("ducati_clkdm"); + if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || + (!l3_2_clkdm) || (!ducati_clkdm) || (!l4_per_clkdm)) + goto err2; + + ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm); + ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm); + ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm); + ret |= clkdm_add_wkdep(mpuss_clkdm, l4_per_clkdm); + ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm); + ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm); + if (ret) { + pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 " + "wakeup dependency\n"); + goto err2; + } + + ret = omap4_mpuss_init(); + if (ret) { + pr_err("Failed to initialise OMAP4 MPUSS\n"); + goto err2; + } + + (void) clkdm_for_each(clkdms_setup, NULL); + #ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); #endif /* CONFIG_SUSPEND */ + /* Overwrite the default arch_idle() */ + pm_idle = omap_default_idle; + + omap4_idle_init(); + err2: return ret; } diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 0363dcb0ef93..5aa5435e3ff1 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -4,7 +4,7 @@ /* * OMAP2/3 PRCM base and module definitions * - * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009, 2011 Texas Instruments, Inc. * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley @@ -201,6 +201,8 @@ #define OMAP3430_EN_MMC2_SHIFT 25 #define OMAP3430_EN_MMC1_MASK (1 << 24) #define OMAP3430_EN_MMC1_SHIFT 24 +#define OMAP3430_EN_UART4_MASK (1 << 23) +#define OMAP3430_EN_UART4_SHIFT 23 #define OMAP3430_EN_MCSPI4_MASK (1 << 21) #define OMAP3430_EN_MCSPI4_SHIFT 21 #define OMAP3430_EN_MCSPI3_MASK (1 << 20) @@ -408,6 +410,79 @@ extern void __iomem *prm_base; extern void __iomem *cm_base; extern void __iomem *cm2_base; + +/** + * struct omap_prcm_irq - describes a PRCM interrupt bit + * @name: a short name describing the interrupt type, e.g. "wkup" or "io" + * @offset: the bit shift of the interrupt inside the IRQ{ENABLE,STATUS} regs + * @priority: should this interrupt be handled before @priority=false IRQs? + * + * Describes interrupt bits inside the PRM_IRQ{ENABLE,STATUS}_MPU* registers. + * On systems with multiple PRM MPU IRQ registers, the bitfields read from + * the registers are concatenated, so @offset could be > 31 on these systems - + * see omap_prm_irq_handler() for more details. I/O ring interrupts should + * have @priority set to true. + */ +struct omap_prcm_irq { + const char *name; + unsigned int offset; + bool priority; +}; + +/** + * struct omap_prcm_irq_setup - PRCM interrupt controller details + * @ack: PRM register offset for the first PRM_IRQSTATUS_MPU register + * @mask: PRM register offset for the first PRM_IRQENABLE_MPU register + * @nr_regs: number of PRM_IRQ{STATUS,ENABLE}_MPU* registers + * @nr_irqs: number of entries in the @irqs array + * @irqs: ptr to an array of PRCM interrupt bits (see @nr_irqs) + * @irq: MPU IRQ asserted when a PRCM interrupt arrives + * @read_pending_irqs: fn ptr to determine if any PRCM IRQs are pending + * @ocp_barrier: fn ptr to force buffered PRM writes to complete + * @save_and_clear_irqen: fn ptr to save and clear IRQENABLE regs + * @restore_irqen: fn ptr to save and clear IRQENABLE regs + * @saved_mask: IRQENABLE regs are saved here during suspend + * @priority_mask: 1 bit per IRQ, set to 1 if omap_prcm_irq.priority = true + * @base_irq: base dynamic IRQ number, returned from irq_alloc_descs() in init + * @suspended: set to true after Linux suspend code has called our ->prepare() + * @suspend_save_flag: set to true after IRQ masks have been saved and disabled + * + * @saved_mask, @priority_mask, @base_irq, @suspended, and + * @suspend_save_flag are populated dynamically, and are not to be + * specified in static initializers. + */ +struct omap_prcm_irq_setup { + u16 ack; + u16 mask; + u8 nr_regs; + u8 nr_irqs; + const struct omap_prcm_irq *irqs; + int irq; + void (*read_pending_irqs)(unsigned long *events); + void (*ocp_barrier)(void); + void (*save_and_clear_irqen)(u32 *saved_mask); + void (*restore_irqen)(u32 *saved_mask); + u32 *saved_mask; + u32 *priority_mask; + int base_irq; + bool suspended; + bool suspend_save_flag; +}; + +/* OMAP_PRCM_IRQ: convenience macro for creating struct omap_prcm_irq records */ +#define OMAP_PRCM_IRQ(_name, _offset, _priority) { \ + .name = _name, \ + .offset = _offset, \ + .priority = _priority \ + } + +extern void omap_prcm_irq_cleanup(void); +extern int omap_prcm_register_chain_handler( + struct omap_prcm_irq_setup *irq_setup); +extern int omap_prcm_event_to_irq(const char *event); +extern void omap_prcm_irq_prepare(void); +extern void omap_prcm_irq_complete(void); + # endif #endif diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 597e2da831b3..626acfad7190 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -25,8 +25,7 @@ #include <linux/delay.h> #include <linux/export.h> -#include <mach/system.h> -#include <plat/common.h> +#include "common.h" #include <plat/prcm.h> #include <plat/irqs.h> @@ -59,7 +58,7 @@ u32 omap_prcm_get_reset_sources(void) EXPORT_SYMBOL(omap_prcm_get_reset_sources); /* Resets clock rates and reboots the system. Only called from system.h */ -static void omap_prcm_arch_reset(char mode, const char *cmd) +void omap_prcm_restart(char mode, const char *cmd) { s16 prcm_offs = 0; @@ -110,8 +109,6 @@ static void omap_prcm_arch_reset(char mode, const char *cmd) omap2_prm_read_mod_reg(prcm_offs, OMAP2_RM_RSTCTRL); /* OCP barrier */ } -void (*arch_reset)(char, const char *) = omap_prcm_arch_reset; - /** * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness * @reg: physical address of module IDLEST register diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c index 171fe171a749..ca669b50f390 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.c +++ b/arch/arm/mach-omap2/prcm_mpu44xx.c @@ -15,7 +15,7 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/common.h> +#include "common.h" #include "prcm_mpu44xx.h" #include "cm-regbits-44xx.h" diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index f02d87f68e54..c1c4d86a79a8 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -1,7 +1,7 @@ /* * OMAP2/3 PRM module functions * - * Copyright (C) 2010 Texas Instruments, Inc. + * Copyright (C) 2010-2011 Texas Instruments, Inc. * Copyright (C) 2010 Nokia Corporation * Benoît Cousson * Paul Walmsley @@ -16,7 +16,7 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/common.h> +#include "common.h" #include <plat/cpu.h> #include <plat/prcm.h> @@ -27,6 +27,24 @@ #include "prm-regbits-24xx.h" #include "prm-regbits-34xx.h" +static const struct omap_prcm_irq omap3_prcm_irqs[] = { + OMAP_PRCM_IRQ("wkup", 0, 0), + OMAP_PRCM_IRQ("io", 9, 1), +}; + +static struct omap_prcm_irq_setup omap3_prcm_irq_setup = { + .ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, + .mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET, + .nr_regs = 1, + .irqs = omap3_prcm_irqs, + .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs), + .irq = INT_34XX_PRCM_MPU_IRQ, + .read_pending_irqs = &omap3xxx_prm_read_pending_irqs, + .ocp_barrier = &omap3xxx_prm_ocp_barrier, + .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen, + .restore_irqen = &omap3xxx_prm_restore_irqen, +}; + u32 omap2_prm_read_mod_reg(s16 module, u16 idx) { return __raw_readl(prm_base + module + idx); @@ -212,3 +230,80 @@ u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) { return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset); } + +/** + * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events + * @events: ptr to a u32, preallocated by caller + * + * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM + * MPU IRQs, and store the result into the u32 pointed to by @events. + * No return value. + */ +void omap3xxx_prm_read_pending_irqs(unsigned long *events) +{ + u32 mask, st; + + /* XXX Can the mask read be avoided (e.g., can it come from RAM?) */ + mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); + st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + + events[0] = mask & st; +} + +/** + * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete + * + * Force any buffered writes to the PRM IP block to complete. Needed + * by the PRM IRQ handler, which reads and writes directly to the IP + * block, to avoid race conditions after acknowledging or clearing IRQ + * bits. No return value. + */ +void omap3xxx_prm_ocp_barrier(void) +{ + omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET); +} + +/** + * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg + * @saved_mask: ptr to a u32 array to save IRQENABLE bits + * + * Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask + * must be allocated by the caller. Intended to be used in the PRM + * interrupt handler suspend callback. The OCP barrier is needed to + * ensure the write to disable PRM interrupts reaches the PRM before + * returning; otherwise, spurious interrupts might occur. No return + * value. + */ +void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask) +{ + saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD, + OMAP3_PRM_IRQENABLE_MPU_OFFSET); + omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); + + /* OCP barrier */ + omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET); +} + +/** + * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args + * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously + * + * Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended + * to be used in the PRM interrupt handler resume callback to restore + * values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP + * barrier should be needed here; any pending PRM interrupts will fire + * once the writes reach the PRM. No return value. + */ +void omap3xxx_prm_restore_irqen(u32 *saved_mask) +{ + omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD, + OMAP3_PRM_IRQENABLE_MPU_OFFSET); +} + +static int __init omap3xxx_prcm_init(void) +{ + if (cpu_is_omap34xx()) + return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); + return 0; +} +subsys_initcall(omap3xxx_prcm_init); diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index cef533df0861..70ac2a19dc5f 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -1,7 +1,7 @@ /* * OMAP2/3 Power/Reset Management (PRM) register definitions * - * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009, 2011 Texas Instruments, Inc. * Copyright (C) 2008-2010 Nokia Corporation * Paul Walmsley * @@ -314,6 +314,13 @@ void omap3_prm_vp_clear_txdone(u8 vp_id); extern u32 omap3_prm_vcvp_read(u8 offset); extern void omap3_prm_vcvp_write(u32 val, u8 offset); extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); + +/* PRM interrupt-related functions */ +extern void omap3xxx_prm_read_pending_irqs(unsigned long *events); +extern void omap3xxx_prm_ocp_barrier(void); +extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask); +extern void omap3xxx_prm_restore_irqen(u32 *saved_mask); + #endif /* CONFIG_ARCH_OMAP4 */ #endif diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 495a31a7e8a7..33dd655e6aab 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -17,7 +17,7 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/common.h> +#include "common.h" #include <plat/cpu.h> #include <plat/prcm.h> @@ -27,6 +27,24 @@ #include "prcm44xx.h" #include "prminst44xx.h" +static const struct omap_prcm_irq omap4_prcm_irqs[] = { + OMAP_PRCM_IRQ("wkup", 0, 0), + OMAP_PRCM_IRQ("io", 9, 1), +}; + +static struct omap_prcm_irq_setup omap4_prcm_irq_setup = { + .ack = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, + .mask = OMAP4_PRM_IRQENABLE_MPU_OFFSET, + .nr_regs = 2, + .irqs = omap4_prcm_irqs, + .nr_irqs = ARRAY_SIZE(omap4_prcm_irqs), + .irq = OMAP44XX_IRQ_PRCM, + .read_pending_irqs = &omap44xx_prm_read_pending_irqs, + .ocp_barrier = &omap44xx_prm_ocp_barrier, + .save_and_clear_irqen = &omap44xx_prm_save_and_clear_irqen, + .restore_irqen = &omap44xx_prm_restore_irqen, +}; + /* PRM low-level functions */ /* Read a register in a CM/PRM instance in the PRM module */ @@ -121,3 +139,101 @@ u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) OMAP4430_PRM_DEVICE_INST, offset); } + +static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs) +{ + u32 mask, st; + + /* XXX read mask from RAM? */ + mask = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqen_offs); + st = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqst_offs); + + return mask & st; +} + +/** + * omap44xx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events + * @events: ptr to two consecutive u32s, preallocated by caller + * + * Read PRM_IRQSTATUS_MPU* bits, AND'ed with the currently-enabled PRM + * MPU IRQs, and store the result into the two u32s pointed to by @events. + * No return value. + */ +void omap44xx_prm_read_pending_irqs(unsigned long *events) +{ + events[0] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_OFFSET, + OMAP4_PRM_IRQSTATUS_MPU_OFFSET); + + events[1] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_2_OFFSET, + OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET); +} + +/** + * omap44xx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete + * + * Force any buffered writes to the PRM IP block to complete. Needed + * by the PRM IRQ handler, which reads and writes directly to the IP + * block, to avoid race conditions after acknowledging or clearing IRQ + * bits. No return value. + */ +void omap44xx_prm_ocp_barrier(void) +{ + omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + OMAP4_REVISION_PRM_OFFSET); +} + +/** + * omap44xx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU* regs + * @saved_mask: ptr to a u32 array to save IRQENABLE bits + * + * Save the PRM_IRQENABLE_MPU and PRM_IRQENABLE_MPU_2 registers to + * @saved_mask. @saved_mask must be allocated by the caller. + * Intended to be used in the PRM interrupt handler suspend callback. + * The OCP barrier is needed to ensure the write to disable PRM + * interrupts reaches the PRM before returning; otherwise, spurious + * interrupts might occur. No return value. + */ +void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask) +{ + saved_mask[0] = + omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IRQSTATUS_MPU_OFFSET); + saved_mask[1] = + omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET); + + omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IRQENABLE_MPU_OFFSET); + omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); + + /* OCP barrier */ + omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + OMAP4_REVISION_PRM_OFFSET); +} + +/** + * omap44xx_prm_restore_irqen - set PRM_IRQENABLE_MPU* registers from args + * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously + * + * Restore the PRM_IRQENABLE_MPU and PRM_IRQENABLE_MPU_2 registers from + * @saved_mask. Intended to be used in the PRM interrupt handler resume + * callback to restore values saved by omap44xx_prm_save_and_clear_irqen(). + * No OCP barrier should be needed here; any pending PRM interrupts will fire + * once the writes reach the PRM. No return value. + */ +void omap44xx_prm_restore_irqen(u32 *saved_mask) +{ + omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IRQENABLE_MPU_OFFSET); + omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); +} + +static int __init omap4xxx_prcm_init(void) +{ + if (cpu_is_omap44xx()) + return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup); + return 0; +} +subsys_initcall(omap4xxx_prcm_init); diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index 3d66ccd849d2..7978092946db 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -1,7 +1,7 @@ /* * OMAP44xx PRM instance offset macros * - * Copyright (C) 2009-2010 Texas Instruments, Inc. + * Copyright (C) 2009-2011 Texas Instruments, Inc. * Copyright (C) 2009-2010 Nokia Corporation * * Paul Walmsley (paul@pwsan.com) @@ -763,6 +763,12 @@ extern u32 omap4_prm_vcvp_read(u8 offset); extern void omap4_prm_vcvp_write(u32 val, u8 offset); extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); +/* PRM interrupt-related functions */ +extern void omap44xx_prm_read_pending_irqs(unsigned long *events); +extern void omap44xx_prm_ocp_barrier(void); +extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask); +extern void omap44xx_prm_restore_irqen(u32 *saved_mask); + # endif #endif diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c new file mode 100644 index 000000000000..860118ab43e2 --- /dev/null +++ b/arch/arm/mach-omap2/prm_common.c @@ -0,0 +1,320 @@ +/* + * OMAP2+ common Power & Reset Management (PRM) IP block functions + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Tero Kristo <t-kristo@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * + * For historical purposes, the API used to configure the PRM + * interrupt handler refers to it as the "PRCM interrupt." The + * underlying registers are located in the PRM on OMAP3/4. + * + * XXX This code should eventually be moved to a PRM driver. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/slab.h> + +#include <mach/system.h> +#include <plat/common.h> +#include <plat/prcm.h> +#include <plat/irqs.h> + +#include "prm2xxx_3xxx.h" +#include "prm44xx.h" + +/* + * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs + * XXX this is technically not needed, since + * omap_prcm_register_chain_handler() could allocate this based on the + * actual amount of memory needed for the SoC + */ +#define OMAP_PRCM_MAX_NR_PENDING_REG 2 + +/* + * prcm_irq_chips: an array of all of the "generic IRQ chips" in use + * by the PRCM interrupt handler code. There will be one 'chip' per + * PRM_{IRQSTATUS,IRQENABLE}_MPU register pair. (So OMAP3 will have + * one "chip" and OMAP4 will have two.) + */ +static struct irq_chip_generic **prcm_irq_chips; + +/* + * prcm_irq_setup: the PRCM IRQ parameters for the hardware the code + * is currently running on. Defined and passed by initialization code + * that calls omap_prcm_register_chain_handler(). + */ +static struct omap_prcm_irq_setup *prcm_irq_setup; + +/* Private functions */ + +/* + * Move priority events from events to priority_events array + */ +static void omap_prcm_events_filter_priority(unsigned long *events, + unsigned long *priority_events) +{ + int i; + + for (i = 0; i < prcm_irq_setup->nr_regs; i++) { + priority_events[i] = + events[i] & prcm_irq_setup->priority_mask[i]; + events[i] ^= priority_events[i]; + } +} + +/* + * PRCM Interrupt Handler + * + * This is a common handler for the OMAP PRCM interrupts. Pending + * interrupts are detected by a call to prcm_pending_events and + * dispatched accordingly. Clearing of the wakeup events should be + * done by the SoC specific individual handlers. + */ +static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + unsigned long pending[OMAP_PRCM_MAX_NR_PENDING_REG]; + unsigned long priority_pending[OMAP_PRCM_MAX_NR_PENDING_REG]; + struct irq_chip *chip = irq_desc_get_chip(desc); + unsigned int virtirq; + int nr_irqs = prcm_irq_setup->nr_regs * 32; + + /* + * If we are suspended, mask all interrupts from PRCM level, + * this does not ack them, and they will be pending until we + * re-enable the interrupts, at which point the + * omap_prcm_irq_handler will be executed again. The + * _save_and_clear_irqen() function must ensure that the PRM + * write to disable all IRQs has reached the PRM before + * returning, or spurious PRCM interrupts may occur during + * suspend. + */ + if (prcm_irq_setup->suspended) { + prcm_irq_setup->save_and_clear_irqen(prcm_irq_setup->saved_mask); + prcm_irq_setup->suspend_save_flag = true; + } + + /* + * Loop until all pending irqs are handled, since + * generic_handle_irq() can cause new irqs to come + */ + while (!prcm_irq_setup->suspended) { + prcm_irq_setup->read_pending_irqs(pending); + + /* No bit set, then all IRQs are handled */ + if (find_first_bit(pending, nr_irqs) >= nr_irqs) + break; + + omap_prcm_events_filter_priority(pending, priority_pending); + + /* + * Loop on all currently pending irqs so that new irqs + * cannot starve previously pending irqs + */ + + /* Serve priority events first */ + for_each_set_bit(virtirq, priority_pending, nr_irqs) + generic_handle_irq(prcm_irq_setup->base_irq + virtirq); + + /* Serve normal events next */ + for_each_set_bit(virtirq, pending, nr_irqs) + generic_handle_irq(prcm_irq_setup->base_irq + virtirq); + } + if (chip->irq_ack) + chip->irq_ack(&desc->irq_data); + if (chip->irq_eoi) + chip->irq_eoi(&desc->irq_data); + chip->irq_unmask(&desc->irq_data); + + prcm_irq_setup->ocp_barrier(); /* avoid spurious IRQs */ +} + +/* Public functions */ + +/** + * omap_prcm_event_to_irq - given a PRCM event name, returns the + * corresponding IRQ on which the handler should be registered + * @name: name of the PRCM interrupt bit to look up - see struct omap_prcm_irq + * + * Returns the Linux internal IRQ ID corresponding to @name upon success, + * or -ENOENT upon failure. + */ +int omap_prcm_event_to_irq(const char *name) +{ + int i; + + if (!prcm_irq_setup || !name) + return -ENOENT; + + for (i = 0; i < prcm_irq_setup->nr_irqs; i++) + if (!strcmp(prcm_irq_setup->irqs[i].name, name)) + return prcm_irq_setup->base_irq + + prcm_irq_setup->irqs[i].offset; + + return -ENOENT; +} + +/** + * omap_prcm_irq_cleanup - reverses memory allocated and other steps + * done by omap_prcm_register_chain_handler() + * + * No return value. + */ +void omap_prcm_irq_cleanup(void) +{ + int i; + + if (!prcm_irq_setup) { + pr_err("PRCM: IRQ handler not initialized; cannot cleanup\n"); + return; + } + + if (prcm_irq_chips) { + for (i = 0; i < prcm_irq_setup->nr_regs; i++) { + if (prcm_irq_chips[i]) + irq_remove_generic_chip(prcm_irq_chips[i], + 0xffffffff, 0, 0); + prcm_irq_chips[i] = NULL; + } + kfree(prcm_irq_chips); + prcm_irq_chips = NULL; + } + + kfree(prcm_irq_setup->saved_mask); + prcm_irq_setup->saved_mask = NULL; + + kfree(prcm_irq_setup->priority_mask); + prcm_irq_setup->priority_mask = NULL; + + irq_set_chained_handler(prcm_irq_setup->irq, NULL); + + if (prcm_irq_setup->base_irq > 0) + irq_free_descs(prcm_irq_setup->base_irq, + prcm_irq_setup->nr_regs * 32); + prcm_irq_setup->base_irq = 0; +} + +void omap_prcm_irq_prepare(void) +{ + prcm_irq_setup->suspended = true; +} + +void omap_prcm_irq_complete(void) +{ + prcm_irq_setup->suspended = false; + + /* If we have not saved the masks, do not attempt to restore */ + if (!prcm_irq_setup->suspend_save_flag) + return; + + prcm_irq_setup->suspend_save_flag = false; + + /* + * Re-enable all masked PRCM irq sources, this causes the PRCM + * interrupt to fire immediately if the events were masked + * previously in the chain handler + */ + prcm_irq_setup->restore_irqen(prcm_irq_setup->saved_mask); +} + +/** + * omap_prcm_register_chain_handler - initializes the prcm chained interrupt + * handler based on provided parameters + * @irq_setup: hardware data about the underlying PRM/PRCM + * + * Set up the PRCM chained interrupt handler on the PRCM IRQ. Sets up + * one generic IRQ chip per PRM interrupt status/enable register pair. + * Returns 0 upon success, -EINVAL if called twice or if invalid + * arguments are passed, or -ENOMEM on any other error. + */ +int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) +{ + int nr_regs = irq_setup->nr_regs; + u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG]; + int offset, i; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + + if (!irq_setup) + return -EINVAL; + + if (prcm_irq_setup) { + pr_err("PRCM: already initialized; won't reinitialize\n"); + return -EINVAL; + } + + if (nr_regs > OMAP_PRCM_MAX_NR_PENDING_REG) { + pr_err("PRCM: nr_regs too large\n"); + return -EINVAL; + } + + prcm_irq_setup = irq_setup; + + prcm_irq_chips = kzalloc(sizeof(void *) * nr_regs, GFP_KERNEL); + prcm_irq_setup->saved_mask = kzalloc(sizeof(u32) * nr_regs, GFP_KERNEL); + prcm_irq_setup->priority_mask = kzalloc(sizeof(u32) * nr_regs, + GFP_KERNEL); + + if (!prcm_irq_chips || !prcm_irq_setup->saved_mask || + !prcm_irq_setup->priority_mask) { + pr_err("PRCM: kzalloc failed\n"); + goto err; + } + + memset(mask, 0, sizeof(mask)); + + for (i = 0; i < irq_setup->nr_irqs; i++) { + offset = irq_setup->irqs[i].offset; + mask[offset >> 5] |= 1 << (offset & 0x1f); + if (irq_setup->irqs[i].priority) + irq_setup->priority_mask[offset >> 5] |= + 1 << (offset & 0x1f); + } + + irq_set_chained_handler(irq_setup->irq, omap_prcm_irq_handler); + + irq_setup->base_irq = irq_alloc_descs(-1, 0, irq_setup->nr_regs * 32, + 0); + + if (irq_setup->base_irq < 0) { + pr_err("PRCM: failed to allocate irq descs: %d\n", + irq_setup->base_irq); + goto err; + } + + for (i = 0; i <= irq_setup->nr_regs; i++) { + gc = irq_alloc_generic_chip("PRCM", 1, + irq_setup->base_irq + i * 32, prm_base, + handle_level_irq); + + if (!gc) { + pr_err("PRCM: failed to allocate generic chip\n"); + goto err; + } + ct = gc->chip_types; + ct->chip.irq_ack = irq_gc_ack_set_bit; + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + + ct->regs.ack = irq_setup->ack + i * 4; + ct->regs.mask = irq_setup->mask + i * 4; + + irq_setup_generic_chip(gc, mask[i], 0, IRQ_NOREQUEST, 0); + prcm_irq_chips[i] = gc; + } + + return 0; + +err: + omap_prcm_irq_cleanup(); + return -ENOMEM; +} diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c index 3a7bab16edd5..f6de5bc6b12a 100644 --- a/arch/arm/mach-omap2/prminst44xx.c +++ b/arch/arm/mach-omap2/prminst44xx.c @@ -16,7 +16,7 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/common.h> +#include "common.h" #include "prm44xx.h" #include "prminst44xx.h" diff --git a/arch/arm/mach-omap2/sdram-nokia.c b/arch/arm/mach-omap2/sdram-nokia.c index 14caa228bc0d..7479d7ea1379 100644 --- a/arch/arm/mach-omap2/sdram-nokia.c +++ b/arch/arm/mach-omap2/sdram-nokia.c @@ -1,7 +1,7 @@ /* * SDRC register values for Nokia boards * - * Copyright (C) 2008, 2010 Nokia Corporation + * Copyright (C) 2008, 2010-2011 Nokia Corporation * * Lauri Leukkunen <lauri.leukkunen@nokia.com> * @@ -18,7 +18,7 @@ #include <linux/io.h> #include <plat/io.h> -#include <plat/common.h> +#include "common.h" #include <plat/clock.h> #include <plat/sdrc.h> @@ -107,14 +107,37 @@ static const struct sdram_timings nokia_195dot2mhz_timings[] = { }, }; +static const struct sdram_timings nokia_200mhz_timings[] = { + { + .casl = 3, + .tDAL = 30000, + .tDPL = 15000, + .tRRD = 10000, + .tRCD = 20000, + .tRP = 15000, + .tRAS = 40000, + .tRC = 55000, + .tRFC = 140000, + .tXSR = 200000, + + .tREF = 7800, + + .tXP = 2, + .tCKE = 4, + .tWTR = 2 + }, +}; + static const struct { long rate; struct sdram_timings const *data; } nokia_timings[] = { { 83000000, nokia_166mhz_timings }, { 97600000, nokia_97dot6mhz_timings }, + { 100000000, nokia_200mhz_timings }, { 166000000, nokia_166mhz_timings }, { 195200000, nokia_195dot2mhz_timings }, + { 200000000, nokia_200mhz_timings }, }; static struct omap_sdrc_params nokia_sdrc_params[ARRAY_SIZE(nokia_timings) + 1]; diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 8f2782874771..e3d345f46409 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -23,7 +23,7 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/common.h> +#include "common.h" #include <plat/clock.h> #include <plat/sram.h> diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index ccdb010f169d..791a63cdceb2 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -24,7 +24,7 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/common.h> +#include "common.h" #include <plat/clock.h> #include <plat/sram.h> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 9992dbfdfdb3..247d89478f24 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -19,26 +19,21 @@ */ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/serial_reg.h> #include <linux/clk.h> #include <linux/io.h> #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/slab.h> -#include <linux/serial_8250.h> #include <linux/pm_runtime.h> #include <linux/console.h> -#ifdef CONFIG_SERIAL_OMAP #include <plat/omap-serial.h> -#endif - -#include <plat/common.h> +#include "common.h" #include <plat/board.h> -#include <plat/clock.h> #include <plat/dma.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> +#include <plat/omap-pm.h> #include "prm2xxx_3xxx.h" #include "pm.h" @@ -47,603 +42,226 @@ #include "control.h" #include "mux.h" -#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52 -#define UART_OMAP_WER 0x17 /* Wake-up enable register */ - -#define UART_ERRATA_FIFO_FULL_ABORT (0x1 << 0) -#define UART_ERRATA_i202_MDR1_ACCESS (0x1 << 1) - /* - * NOTE: By default the serial timeout is disabled as it causes lost characters - * over the serial ports. This means that the UART clocks will stay on until - * disabled via sysfs. This also causes that any deeper omap sleep states are - * blocked. + * NOTE: By default the serial auto_suspend timeout is disabled as it causes + * lost characters over the serial ports. This means that the UART clocks will + * stay on until power/autosuspend_delay is set for the uart from sysfs. + * This also causes that any deeper omap sleep states are blocked. */ -#define DEFAULT_TIMEOUT 0 +#define DEFAULT_AUTOSUSPEND_DELAY -1 #define MAX_UART_HWMOD_NAME_LEN 16 struct omap_uart_state { int num; int can_sleep; - struct timer_list timer; - u32 timeout; - - void __iomem *wk_st; - void __iomem *wk_en; - u32 wk_mask; - u32 padconf; - u32 dma_enabled; - - struct clk *ick; - struct clk *fck; - int clocked; - - int irq; - int regshift; - int irqflags; - void __iomem *membase; - resource_size_t mapbase; struct list_head node; struct omap_hwmod *oh; struct platform_device *pdev; - - u32 errata; -#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) - int context_valid; - - /* Registers to be saved/restored for OFF-mode */ - u16 dll; - u16 dlh; - u16 ier; - u16 sysc; - u16 scr; - u16 wer; - u16 mcr; -#endif }; static LIST_HEAD(uart_list); static u8 num_uarts; +static u8 console_uart_id = -1; +static u8 no_console_suspend; +static u8 uart_debug; + +#define DEFAULT_RXDMA_POLLRATE 1 /* RX DMA polling rate (us) */ +#define DEFAULT_RXDMA_BUFSIZE 4096 /* RX DMA buffer size */ +#define DEFAULT_RXDMA_TIMEOUT (3 * HZ)/* RX DMA timeout (jiffies) */ + +static struct omap_uart_port_info omap_serial_default_info[] __initdata = { + { + .dma_enabled = false, + .dma_rx_buf_size = DEFAULT_RXDMA_BUFSIZE, + .dma_rx_poll_rate = DEFAULT_RXDMA_POLLRATE, + .dma_rx_timeout = DEFAULT_RXDMA_TIMEOUT, + .autosuspend_timeout = DEFAULT_AUTOSUSPEND_DELAY, + }, +}; -static inline unsigned int __serial_read_reg(struct uart_port *up, - int offset) -{ - offset <<= up->regshift; - return (unsigned int)__raw_readb(up->membase + offset); -} - -static inline unsigned int serial_read_reg(struct omap_uart_state *uart, - int offset) +#ifdef CONFIG_PM +static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) { - offset <<= uart->regshift; - return (unsigned int)__raw_readb(uart->membase + offset); -} + struct omap_device *od = to_omap_device(pdev); -static inline void __serial_write_reg(struct uart_port *up, int offset, - int value) -{ - offset <<= up->regshift; - __raw_writeb(value, up->membase + offset); -} + if (!od) + return; -static inline void serial_write_reg(struct omap_uart_state *uart, int offset, - int value) -{ - offset <<= uart->regshift; - __raw_writeb(value, uart->membase + offset); + if (enable) + omap_hwmod_enable_wakeup(od->hwmods[0]); + else + omap_hwmod_disable_wakeup(od->hwmods[0]); } /* - * Internal UARTs need to be initialized for the 8250 autoconfig to work - * properly. Note that the TX watermark initialization may not be needed - * once the 8250.c watermark handling code is merged. + * Errata i291: [UART]:Cannot Acknowledge Idle Requests + * in Smartidle Mode When Configured for DMA Operations. + * WA: configure uart in force idle mode. */ - -static inline void __init omap_uart_reset(struct omap_uart_state *uart) +static void omap_uart_set_noidle(struct platform_device *pdev) { - serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); - serial_write_reg(uart, UART_OMAP_SCR, 0x08); - serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE); -} - -#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) + struct omap_device *od = to_omap_device(pdev); -/* - * Work Around for Errata i202 (3430 - 1.12, 3630 - 1.6) - * The access to uart register after MDR1 Access - * causes UART to corrupt data. - * - * Need a delay = - * 5 L4 clock cycles + 5 UART functional clock cycle (@48MHz = ~0.2uS) - * give 10 times as much - */ -static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val, - u8 fcr_val) -{ - u8 timeout = 255; - - serial_write_reg(uart, UART_OMAP_MDR1, mdr1_val); - udelay(2); - serial_write_reg(uart, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT | - UART_FCR_CLEAR_RCVR); - /* - * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and - * TX_FIFO_E bit is 1. - */ - while (UART_LSR_THRE != (serial_read_reg(uart, UART_LSR) & - (UART_LSR_THRE | UART_LSR_DR))) { - timeout--; - if (!timeout) { - /* Should *never* happen. we warn and carry on */ - dev_crit(&uart->pdev->dev, "Errata i202: timedout %x\n", - serial_read_reg(uart, UART_LSR)); - break; - } - udelay(1); - } + omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); } -static void omap_uart_save_context(struct omap_uart_state *uart) +static void omap_uart_set_forceidle(struct platform_device *pdev) { - u16 lcr = 0; + struct omap_device *od = to_omap_device(pdev); - if (!enable_off_mode) - return; - - lcr = serial_read_reg(uart, UART_LCR); - serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B); - uart->dll = serial_read_reg(uart, UART_DLL); - uart->dlh = serial_read_reg(uart, UART_DLM); - serial_write_reg(uart, UART_LCR, lcr); - uart->ier = serial_read_reg(uart, UART_IER); - uart->sysc = serial_read_reg(uart, UART_OMAP_SYSC); - uart->scr = serial_read_reg(uart, UART_OMAP_SCR); - uart->wer = serial_read_reg(uart, UART_OMAP_WER); - serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_A); - uart->mcr = serial_read_reg(uart, UART_MCR); - serial_write_reg(uart, UART_LCR, lcr); - - uart->context_valid = 1; + omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_FORCE); } -static void omap_uart_restore_context(struct omap_uart_state *uart) -{ - u16 efr = 0; - - if (!enable_off_mode) - return; - - if (!uart->context_valid) - return; - - uart->context_valid = 0; - - if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS) - omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_DISABLE, 0xA0); - else - serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); - - serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B); - efr = serial_read_reg(uart, UART_EFR); - serial_write_reg(uart, UART_EFR, UART_EFR_ECB); - serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */ - serial_write_reg(uart, UART_IER, 0x0); - serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B); - serial_write_reg(uart, UART_DLL, uart->dll); - serial_write_reg(uart, UART_DLM, uart->dlh); - serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */ - serial_write_reg(uart, UART_IER, uart->ier); - serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_A); - serial_write_reg(uart, UART_MCR, uart->mcr); - serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B); - serial_write_reg(uart, UART_EFR, efr); - serial_write_reg(uart, UART_LCR, UART_LCR_WLEN8); - serial_write_reg(uart, UART_OMAP_SCR, uart->scr); - serial_write_reg(uart, UART_OMAP_WER, uart->wer); - serial_write_reg(uart, UART_OMAP_SYSC, uart->sysc); - - if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS) - omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_16X_MODE, 0xA1); - else - /* UART 16x mode */ - serial_write_reg(uart, UART_OMAP_MDR1, - UART_OMAP_MDR1_16X_MODE); -} #else -static inline void omap_uart_save_context(struct omap_uart_state *uart) {} -static inline void omap_uart_restore_context(struct omap_uart_state *uart) {} -#endif /* CONFIG_PM && CONFIG_ARCH_OMAP3 */ - -static inline void omap_uart_enable_clocks(struct omap_uart_state *uart) -{ - if (uart->clocked) - return; - - omap_device_enable(uart->pdev); - uart->clocked = 1; - omap_uart_restore_context(uart); -} - -#ifdef CONFIG_PM - -static inline void omap_uart_disable_clocks(struct omap_uart_state *uart) -{ - if (!uart->clocked) - return; - - omap_uart_save_context(uart); - uart->clocked = 0; - omap_device_idle(uart->pdev); -} - -static void omap_uart_enable_wakeup(struct omap_uart_state *uart) -{ - /* Set wake-enable bit */ - if (uart->wk_en && uart->wk_mask) { - u32 v = __raw_readl(uart->wk_en); - v |= uart->wk_mask; - __raw_writel(v, uart->wk_en); - } - - /* Ensure IOPAD wake-enables are set */ - if (cpu_is_omap34xx() && uart->padconf) { - u16 v = omap_ctrl_readw(uart->padconf); - v |= OMAP3_PADCONF_WAKEUPENABLE0; - omap_ctrl_writew(v, uart->padconf); - } -} - -static void omap_uart_disable_wakeup(struct omap_uart_state *uart) -{ - /* Clear wake-enable bit */ - if (uart->wk_en && uart->wk_mask) { - u32 v = __raw_readl(uart->wk_en); - v &= ~uart->wk_mask; - __raw_writel(v, uart->wk_en); - } - - /* Ensure IOPAD wake-enables are cleared */ - if (cpu_is_omap34xx() && uart->padconf) { - u16 v = omap_ctrl_readw(uart->padconf); - v &= ~OMAP3_PADCONF_WAKEUPENABLE0; - omap_ctrl_writew(v, uart->padconf); - } -} - -static void omap_uart_smart_idle_enable(struct omap_uart_state *uart, - int enable) -{ - u8 idlemode; - - if (enable) { - /** - * Errata 2.15: [UART]:Cannot Acknowledge Idle Requests - * in Smartidle Mode When Configured for DMA Operations. - */ - if (uart->dma_enabled) - idlemode = HWMOD_IDLEMODE_FORCE; - else - idlemode = HWMOD_IDLEMODE_SMART; - } else { - idlemode = HWMOD_IDLEMODE_NO; - } - - omap_hwmod_set_slave_idlemode(uart->oh, idlemode); -} - -static void omap_uart_block_sleep(struct omap_uart_state *uart) -{ - omap_uart_enable_clocks(uart); - - omap_uart_smart_idle_enable(uart, 0); - uart->can_sleep = 0; - if (uart->timeout) - mod_timer(&uart->timer, jiffies + uart->timeout); - else - del_timer(&uart->timer); -} - -static void omap_uart_allow_sleep(struct omap_uart_state *uart) -{ - if (device_may_wakeup(&uart->pdev->dev)) - omap_uart_enable_wakeup(uart); - else - omap_uart_disable_wakeup(uart); - - if (!uart->clocked) - return; - - omap_uart_smart_idle_enable(uart, 1); - uart->can_sleep = 1; - del_timer(&uart->timer); -} - -static void omap_uart_idle_timer(unsigned long data) -{ - struct omap_uart_state *uart = (struct omap_uart_state *)data; - - omap_uart_allow_sleep(uart); -} - -void omap_uart_prepare_idle(int num) -{ - struct omap_uart_state *uart; - - list_for_each_entry(uart, &uart_list, node) { - if (num == uart->num && uart->can_sleep) { - omap_uart_disable_clocks(uart); - return; - } - } -} - -void omap_uart_resume_idle(int num) -{ - struct omap_uart_state *uart; - - list_for_each_entry(uart, &uart_list, node) { - if (num == uart->num && uart->can_sleep) { - omap_uart_enable_clocks(uart); - - /* Check for IO pad wakeup */ - if (cpu_is_omap34xx() && uart->padconf) { - u16 p = omap_ctrl_readw(uart->padconf); - - if (p & OMAP3_PADCONF_WAKEUPEVENT0) - omap_uart_block_sleep(uart); - } - - /* Check for normal UART wakeup */ - if (__raw_readl(uart->wk_st) & uart->wk_mask) - omap_uart_block_sleep(uart); - return; - } - } -} - -void omap_uart_prepare_suspend(void) -{ - struct omap_uart_state *uart; - - list_for_each_entry(uart, &uart_list, node) { - omap_uart_allow_sleep(uart); - } -} - -int omap_uart_can_sleep(void) -{ - struct omap_uart_state *uart; - int can_sleep = 1; - - list_for_each_entry(uart, &uart_list, node) { - if (!uart->clocked) - continue; - - if (!uart->can_sleep) { - can_sleep = 0; - continue; - } - - /* This UART can now safely sleep. */ - omap_uart_allow_sleep(uart); - } - - return can_sleep; -} +static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) +{} +static void omap_uart_set_noidle(struct platform_device *pdev) {} +static void omap_uart_set_forceidle(struct platform_device *pdev) {} +#endif /* CONFIG_PM */ -/** - * omap_uart_interrupt() - * - * This handler is used only to detect that *any* UART interrupt has - * occurred. It does _nothing_ to handle the interrupt. Rather, - * any UART interrupt will trigger the inactivity timer so the - * UART will not idle or sleep for its timeout period. - * - **/ -/* static int first_interrupt; */ -static irqreturn_t omap_uart_interrupt(int irq, void *dev_id) -{ - struct omap_uart_state *uart = dev_id; +#ifdef CONFIG_OMAP_MUX +static struct omap_device_pad default_uart1_pads[] __initdata = { + { + .name = "uart1_cts.uart1_cts", + .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, + }, + { + .name = "uart1_rts.uart1_rts", + .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, + }, + { + .name = "uart1_tx.uart1_tx", + .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, + }, + { + .name = "uart1_rx.uart1_rx", + .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, + .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, + .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, + }, +}; - omap_uart_block_sleep(uart); +static struct omap_device_pad default_uart2_pads[] __initdata = { + { + .name = "uart2_cts.uart2_cts", + .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, + }, + { + .name = "uart2_rts.uart2_rts", + .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, + }, + { + .name = "uart2_tx.uart2_tx", + .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, + }, + { + .name = "uart2_rx.uart2_rx", + .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, + .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, + .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, + }, +}; - return IRQ_NONE; -} +static struct omap_device_pad default_uart3_pads[] __initdata = { + { + .name = "uart3_cts_rctx.uart3_cts_rctx", + .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, + }, + { + .name = "uart3_rts_sd.uart3_rts_sd", + .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, + }, + { + .name = "uart3_tx_irtx.uart3_tx_irtx", + .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, + }, + { + .name = "uart3_rx_irrx.uart3_rx_irrx", + .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, + .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, + .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, + }, +}; -static void omap_uart_idle_init(struct omap_uart_state *uart) -{ - int ret; - - uart->can_sleep = 0; - uart->timeout = DEFAULT_TIMEOUT; - setup_timer(&uart->timer, omap_uart_idle_timer, - (unsigned long) uart); - if (uart->timeout) - mod_timer(&uart->timer, jiffies + uart->timeout); - omap_uart_smart_idle_enable(uart, 0); - - if (cpu_is_omap34xx() && !cpu_is_ti816x()) { - u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD; - u32 wk_mask = 0; - u32 padconf = 0; - - /* XXX These PRM accesses do not belong here */ - uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1); - uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1); - switch (uart->num) { - case 0: - wk_mask = OMAP3430_ST_UART1_MASK; - padconf = 0x182; - break; - case 1: - wk_mask = OMAP3430_ST_UART2_MASK; - padconf = 0x17a; - break; - case 2: - wk_mask = OMAP3430_ST_UART3_MASK; - padconf = 0x19e; - break; - case 3: - wk_mask = OMAP3630_ST_UART4_MASK; - padconf = 0x0d2; - break; - } - uart->wk_mask = wk_mask; - uart->padconf = padconf; - } else if (cpu_is_omap24xx()) { - u32 wk_mask = 0; - u32 wk_en = PM_WKEN1, wk_st = PM_WKST1; - - switch (uart->num) { - case 0: - wk_mask = OMAP24XX_ST_UART1_MASK; - break; - case 1: - wk_mask = OMAP24XX_ST_UART2_MASK; - break; - case 2: - wk_en = OMAP24XX_PM_WKEN2; - wk_st = OMAP24XX_PM_WKST2; - wk_mask = OMAP24XX_ST_UART3_MASK; - break; - } - uart->wk_mask = wk_mask; - if (cpu_is_omap2430()) { - uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, wk_en); - uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, wk_st); - } else if (cpu_is_omap2420()) { - uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, wk_en); - uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, wk_st); - } - } else { - uart->wk_en = NULL; - uart->wk_st = NULL; - uart->wk_mask = 0; - uart->padconf = 0; - } +static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = { + { + .name = "gpmc_wait2.uart4_tx", + .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, + }, + { + .name = "gpmc_wait3.uart4_rx", + .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, + .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE2, + .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE2, + }, +}; - uart->irqflags |= IRQF_SHARED; - ret = request_threaded_irq(uart->irq, NULL, omap_uart_interrupt, - IRQF_SHARED, "serial idle", (void *)uart); - WARN_ON(ret); -} +static struct omap_device_pad default_omap4_uart4_pads[] __initdata = { + { + .name = "uart4_tx.uart4_tx", + .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, + }, + { + .name = "uart4_rx.uart4_rx", + .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, + .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, + .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, + }, +}; -void omap_uart_enable_irqs(int enable) +static void omap_serial_fill_default_pads(struct omap_board_data *bdata) { - int ret; - struct omap_uart_state *uart; - - list_for_each_entry(uart, &uart_list, node) { - if (enable) { - pm_runtime_put_sync(&uart->pdev->dev); - ret = request_threaded_irq(uart->irq, NULL, - omap_uart_interrupt, - IRQF_SHARED, - "serial idle", - (void *)uart); - } else { - pm_runtime_get_noresume(&uart->pdev->dev); - free_irq(uart->irq, (void *)uart); + switch (bdata->id) { + case 0: + bdata->pads = default_uart1_pads; + bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads); + break; + case 1: + bdata->pads = default_uart2_pads; + bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads); + break; + case 2: + bdata->pads = default_uart3_pads; + bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads); + break; + case 3: + if (cpu_is_omap44xx()) { + bdata->pads = default_omap4_uart4_pads; + bdata->pads_cnt = + ARRAY_SIZE(default_omap4_uart4_pads); + } else if (cpu_is_omap3630()) { + bdata->pads = default_omap36xx_uart4_pads; + bdata->pads_cnt = + ARRAY_SIZE(default_omap36xx_uart4_pads); } + break; + default: + break; } } - -static ssize_t sleep_timeout_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *odev = to_omap_device(pdev); - struct omap_uart_state *uart = odev->hwmods[0]->dev_attr; - - return sprintf(buf, "%u\n", uart->timeout / HZ); -} - -static ssize_t sleep_timeout_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t n) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *odev = to_omap_device(pdev); - struct omap_uart_state *uart = odev->hwmods[0]->dev_attr; - unsigned int value; - - if (sscanf(buf, "%u", &value) != 1) { - dev_err(dev, "sleep_timeout_store: Invalid value\n"); - return -EINVAL; - } - - uart->timeout = value * HZ; - if (uart->timeout) - mod_timer(&uart->timer, jiffies + uart->timeout); - else - /* A zero value means disable timeout feature */ - omap_uart_block_sleep(uart); - - return n; -} - -static DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, - sleep_timeout_store); -#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr)) #else -static inline void omap_uart_idle_init(struct omap_uart_state *uart) {} -static void omap_uart_block_sleep(struct omap_uart_state *uart) -{ - /* Needed to enable UART clocks when built without CONFIG_PM */ - omap_uart_enable_clocks(uart); -} -#define DEV_CREATE_FILE(dev, attr) -#endif /* CONFIG_PM */ - -#ifndef CONFIG_SERIAL_OMAP -/* - * Override the default 8250 read handler: mem_serial_in() - * Empty RX fifo read causes an abort on omap3630 and omap4 - * This function makes sure that an empty rx fifo is not read on these silicons - * (OMAP1/2/3430 are not affected) - */ -static unsigned int serial_in_override(struct uart_port *up, int offset) -{ - if (UART_RX == offset) { - unsigned int lsr; - lsr = __serial_read_reg(up, UART_LSR); - if (!(lsr & UART_LSR_DR)) - return -EPERM; - } - - return __serial_read_reg(up, offset); -} +static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} +#endif -static void serial_out_override(struct uart_port *up, int offset, int value) +char *cmdline_find_option(char *str) { - unsigned int status, tmout = 10000; + extern char *saved_command_line; - status = __serial_read_reg(up, UART_LSR); - while (!(status & UART_LSR_THRE)) { - /* Wait up to 10ms for the character(s) to be sent. */ - if (--tmout == 0) - break; - udelay(1); - status = __serial_read_reg(up, UART_LSR); - } - __serial_write_reg(up, offset, value); + return strstr(saved_command_line, str); } -#endif static int __init omap_serial_early_init(void) { - int i = 0; - do { char oh_name[MAX_UART_HWMOD_NAME_LEN]; struct omap_hwmod *oh; struct omap_uart_state *uart; + char uart_name[MAX_UART_HWMOD_NAME_LEN]; snprintf(oh_name, MAX_UART_HWMOD_NAME_LEN, - "uart%d", i + 1); + "uart%d", num_uarts + 1); oh = omap_hwmod_lookup(oh_name); if (!oh) break; @@ -653,21 +271,35 @@ static int __init omap_serial_early_init(void) return -ENODEV; uart->oh = oh; - uart->num = i++; + uart->num = num_uarts++; list_add_tail(&uart->node, &uart_list); - num_uarts++; - - /* - * NOTE: omap_hwmod_setup*() has not yet been called, - * so no hwmod functions will work yet. - */ - - /* - * During UART early init, device need to be probed - * to determine SoC specific init before omap_device - * is ready. Therefore, don't allow idle here - */ - uart->oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET; + snprintf(uart_name, MAX_UART_HWMOD_NAME_LEN, + "%s%d", OMAP_SERIAL_NAME, uart->num); + + if (cmdline_find_option(uart_name)) { + console_uart_id = uart->num; + + if (console_loglevel >= 10) { + uart_debug = true; + pr_info("%s used as console in debug mode" + " uart%d clocks will not be" + " gated", uart_name, uart->num); + } + + if (cmdline_find_option("no_console_suspend")) + no_console_suspend = true; + + /* + * omap-uart can be used for earlyprintk logs + * So if omap-uart is used as console then prevent + * uart reset and idle to get logs from omap-uart + * until uart console driver is available to take + * care for console messages. + * Idling or resetting omap-uart while printing logs + * early boot logs can stall the boot-up. + */ + oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET; + } } while (1); return 0; @@ -677,6 +309,7 @@ core_initcall(omap_serial_early_init); /** * omap_serial_init_port() - initialize single serial port * @bdata: port specific board data pointer + * @info: platform specific data pointer * * This function initialies serial driver for given port only. * Platforms can call this function instead of omap_serial_init() @@ -685,7 +318,8 @@ core_initcall(omap_serial_early_init); * Don't mix calls to omap_serial_init_port() and omap_serial_init(), * use only one of the two. */ -void __init omap_serial_init_port(struct omap_board_data *bdata) +void __init omap_serial_init_port(struct omap_board_data *bdata, + struct omap_uart_port_info *info) { struct omap_uart_state *uart; struct omap_hwmod *oh; @@ -693,15 +327,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) void *pdata = NULL; u32 pdata_size = 0; char *name; -#ifndef CONFIG_SERIAL_OMAP - struct plat_serial8250_port ports[2] = { - {}, - {.flags = 0}, - }; - struct plat_serial8250_port *p = &ports[0]; -#else struct omap_uart_port_info omap_up; -#endif if (WARN_ON(!bdata)) return; @@ -713,66 +339,34 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) list_for_each_entry(uart, &uart_list, node) if (bdata->id == uart->num) break; + if (!info) + info = omap_serial_default_info; oh = uart->oh; - uart->dma_enabled = 0; -#ifndef CONFIG_SERIAL_OMAP - name = "serial8250"; - - /* - * !! 8250 driver does not use standard IORESOURCE* It - * has it's own custom pdata that can be taken from - * the hwmod resource data. But, this needs to be - * done after the build. - * - * ?? does it have to be done before the register ?? - * YES, because platform_device_data_add() copies - * pdata, it does not use a pointer. - */ - p->flags = UPF_BOOT_AUTOCONF; - p->iotype = UPIO_MEM; - p->regshift = 2; - p->uartclk = OMAP24XX_BASE_BAUD * 16; - p->irq = oh->mpu_irqs[0].irq; - p->mapbase = oh->slaves[0]->addr->pa_start; - p->membase = omap_hwmod_get_mpu_rt_va(oh); - p->irqflags = IRQF_SHARED; - p->private_data = uart; - - /* - * omap44xx, ti816x: Never read empty UART fifo - * omap3xxx: Never read empty UART fifo on UARTs - * with IP rev >=0x52 - */ - uart->regshift = p->regshift; - uart->membase = p->membase; - if (cpu_is_omap44xx() || cpu_is_ti816x()) - uart->errata |= UART_ERRATA_FIFO_FULL_ABORT; - else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF) - >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) - uart->errata |= UART_ERRATA_FIFO_FULL_ABORT; - - if (uart->errata & UART_ERRATA_FIFO_FULL_ABORT) { - p->serial_in = serial_in_override; - p->serial_out = serial_out_override; - } - - pdata = &ports[0]; - pdata_size = 2 * sizeof(struct plat_serial8250_port); -#else - name = DRIVER_NAME; - omap_up.dma_enabled = uart->dma_enabled; + omap_up.dma_enabled = info->dma_enabled; omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; - omap_up.mapbase = oh->slaves[0]->addr->pa_start; - omap_up.membase = omap_hwmod_get_mpu_rt_va(oh); - omap_up.irqflags = IRQF_SHARED; - omap_up.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + omap_up.flags = UPF_BOOT_AUTOCONF; + omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; + omap_up.set_forceidle = omap_uart_set_forceidle; + omap_up.set_noidle = omap_uart_set_noidle; + omap_up.enable_wakeup = omap_uart_enable_wakeup; + omap_up.dma_rx_buf_size = info->dma_rx_buf_size; + omap_up.dma_rx_timeout = info->dma_rx_timeout; + omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate; + omap_up.autosuspend_timeout = info->autosuspend_timeout; + + /* Enable the MDR1 Errata i202 for OMAP2430/3xxx/44xx */ + if (!cpu_is_omap2420() && !cpu_is_ti816x()) + omap_up.errata |= UART_ERRATA_i202_MDR1_ACCESS; + + /* Enable DMA Mode Force Idle Errata i291 for omap34xx/3630 */ + if (cpu_is_omap34xx() || cpu_is_omap3630()) + omap_up.errata |= UART_ERRATA_i291_DMA_FORCEIDLE; pdata = &omap_up; pdata_size = sizeof(struct omap_uart_port_info); -#endif if (WARN_ON(!oh)) return; @@ -782,64 +376,29 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n", name, oh->name); - omap_device_disable_idle_on_suspend(pdev); + if ((console_uart_id == bdata->id) && no_console_suspend) + omap_device_disable_idle_on_suspend(pdev); + oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); - uart->irq = oh->mpu_irqs[0].irq; - uart->regshift = 2; - uart->mapbase = oh->slaves[0]->addr->pa_start; - uart->membase = omap_hwmod_get_mpu_rt_va(oh); uart->pdev = pdev; oh->dev_attr = uart; - console_lock(); /* in case the earlycon is on the UART */ - - /* - * Because of early UART probing, UART did not get idled - * on init. Now that omap_device is ready, ensure full idle - * before doing omap_device_enable(). - */ - omap_hwmod_idle(uart->oh); - - omap_device_enable(uart->pdev); - omap_uart_idle_init(uart); - omap_uart_reset(uart); - omap_hwmod_enable_wakeup(uart->oh); - omap_device_idle(uart->pdev); - - /* - * Need to block sleep long enough for interrupt driven - * driver to start. Console driver is in polling mode - * so device needs to be kept enabled while polling driver - * is in use. - */ - if (uart->timeout) - uart->timeout = (30 * HZ); - omap_uart_block_sleep(uart); - uart->timeout = DEFAULT_TIMEOUT; - - console_unlock(); - - if ((cpu_is_omap34xx() && uart->padconf) || - (uart->wk_en && uart->wk_mask)) { + if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads) + && !uart_debug) device_init_wakeup(&pdev->dev, true); - DEV_CREATE_FILE(&pdev->dev, &dev_attr_sleep_timeout); - } - - /* Enable the MDR1 errata for OMAP3 */ - if (cpu_is_omap34xx() && !cpu_is_ti816x()) - uart->errata |= UART_ERRATA_i202_MDR1_ACCESS; } /** - * omap_serial_init() - initialize all supported serial ports + * omap_serial_board_init() - initialize all supported serial ports + * @info: platform specific data pointer * * Initializes all available UARTs as serial ports. Platforms * can call this function when they want to have default behaviour * for serial ports (e.g initialize them all as serial ports). */ -void __init omap_serial_init(void) +void __init omap_serial_board_init(struct omap_uart_port_info *info) { struct omap_uart_state *uart; struct omap_board_data bdata; @@ -849,7 +408,25 @@ void __init omap_serial_init(void) bdata.flags = 0; bdata.pads = NULL; bdata.pads_cnt = 0; - omap_serial_init_port(&bdata); + if (cpu_is_omap44xx() || cpu_is_omap34xx()) + omap_serial_fill_default_pads(&bdata); + + if (!info) + omap_serial_init_port(&bdata, NULL); + else + omap_serial_init_port(&bdata, &info[uart->num]); } } + +/** + * omap_serial_init() - initialize all supported serial ports + * + * Initializes all available UARTs. + * Platforms can call this function when they want to have default behaviour + * for serial ports (e.g initialize them all as serial ports). + */ +void __init omap_serial_init(void) +{ + omap_serial_board_init(NULL); +} diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S new file mode 100644 index 000000000000..abd283400490 --- /dev/null +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -0,0 +1,379 @@ +/* + * OMAP44xx sleep code. + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software,you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/system.h> +#include <asm/smp_scu.h> +#include <asm/memory.h> +#include <asm/hardware/cache-l2x0.h> + +#include <plat/omap44xx.h> +#include <mach/omap-secure.h> + +#include "common.h" +#include "omap4-sar-layout.h" + +#if defined(CONFIG_SMP) && defined(CONFIG_PM) + +.macro DO_SMC + dsb + smc #0 + dsb +.endm + +ppa_zero_params: + .word 0x0 + +ppa_por_params: + .word 1, 0 + +/* + * ============================= + * == CPU suspend finisher == + * ============================= + * + * void omap4_finish_suspend(unsigned long cpu_state) + * + * This function code saves the CPU context and performs the CPU + * power down sequence. Calling WFI effectively changes the CPU + * power domains states to the desired target power state. + * + * @cpu_state : contains context save state (r0) + * 0 - No context lost + * 1 - CPUx L1 and logic lost: MPUSS CSWR + * 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR + * 3 - CPUx L1 and logic lost + GIC + L2 lost: MPUSS OFF + * @return: This function never returns for CPU OFF and DORMANT power states. + * Post WFI, CPU transitions to DORMANT or OFF power state and on wake-up + * from this follows a full CPU reset path via ROM code to CPU restore code. + * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. + * It returns to the caller for CPU INACTIVE and ON power states or in case + * CPU failed to transition to targeted OFF/DORMANT state. + */ +ENTRY(omap4_finish_suspend) + stmfd sp!, {lr} + cmp r0, #0x0 + beq do_WFI @ No lowpower state, jump to WFI + + /* + * Flush all data from the L1 data cache before disabling + * SCTLR.C bit. + */ + bl omap4_get_sar_ram_base + ldr r9, [r0, #OMAP_TYPE_OFFSET] + cmp r9, #0x1 @ Check for HS device + bne skip_secure_l1_clean + mov r0, #SCU_PM_NORMAL + mov r1, #0xFF @ clean seucre L1 + stmfd r13!, {r4-r12, r14} + ldr r12, =OMAP4_MON_SCU_PWR_INDEX + DO_SMC + ldmfd r13!, {r4-r12, r14} +skip_secure_l1_clean: + bl v7_flush_dcache_all + + /* + * Clear the SCTLR.C bit to prevent further data cache + * allocation. Clearing SCTLR.C would make all the data accesses + * strongly ordered and would not hit the cache. + */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #(1 << 2) @ Disable the C bit + mcr p15, 0, r0, c1, c0, 0 + isb + + /* + * Invalidate L1 data cache. Even though only invalidate is + * necessary exported flush API is used here. Doing clean + * on already clean cache would be almost NOP. + */ + bl v7_flush_dcache_all + + /* + * Switch the CPU from Symmetric Multiprocessing (SMP) mode + * to AsymmetricMultiprocessing (AMP) mode by programming + * the SCU power status to DORMANT or OFF mode. + * This enables the CPU to be taken out of coherency by + * preventing the CPU from receiving cache, TLB, or BTB + * maintenance operations broadcast by other CPUs in the cluster. + */ + bl omap4_get_sar_ram_base + mov r8, r0 + ldr r9, [r8, #OMAP_TYPE_OFFSET] + cmp r9, #0x1 @ Check for HS device + bne scu_gp_set + mrc p15, 0, r0, c0, c0, 5 @ Read MPIDR + ands r0, r0, #0x0f + ldreq r0, [r8, #SCU_OFFSET0] + ldrne r0, [r8, #SCU_OFFSET1] + mov r1, #0x00 + stmfd r13!, {r4-r12, r14} + ldr r12, =OMAP4_MON_SCU_PWR_INDEX + DO_SMC + ldmfd r13!, {r4-r12, r14} + b skip_scu_gp_set +scu_gp_set: + mrc p15, 0, r0, c0, c0, 5 @ Read MPIDR + ands r0, r0, #0x0f + ldreq r1, [r8, #SCU_OFFSET0] + ldrne r1, [r8, #SCU_OFFSET1] + bl omap4_get_scu_base + bl scu_power_mode +skip_scu_gp_set: + mrc p15, 0, r0, c1, c1, 2 @ Read NSACR data + tst r0, #(1 << 18) + mrcne p15, 0, r0, c1, c0, 1 + bicne r0, r0, #(1 << 6) @ Disable SMP bit + mcrne p15, 0, r0, c1, c0, 1 + isb + dsb +#ifdef CONFIG_CACHE_L2X0 + /* + * Clean and invalidate the L2 cache. + * Common cache-l2x0.c functions can't be used here since it + * uses spinlocks. We are out of coherency here with data cache + * disabled. The spinlock implementation uses exclusive load/store + * instruction which can fail without data cache being enabled. + * OMAP4 hardware doesn't support exclusive monitor which can + * overcome exclusive access issue. Because of this, CPU can + * lead to deadlock. + */ + bl omap4_get_sar_ram_base + mov r8, r0 + mrc p15, 0, r5, c0, c0, 5 @ Read MPIDR + ands r5, r5, #0x0f + ldreq r0, [r8, #L2X0_SAVE_OFFSET0] @ Retrieve L2 state from SAR + ldrne r0, [r8, #L2X0_SAVE_OFFSET1] @ memory. + cmp r0, #3 + bne do_WFI +#ifdef CONFIG_PL310_ERRATA_727915 + mov r0, #0x03 + mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX + DO_SMC +#endif + bl omap4_get_l2cache_base + mov r2, r0 + ldr r0, =0xffff + str r0, [r2, #L2X0_CLEAN_INV_WAY] +wait: + ldr r0, [r2, #L2X0_CLEAN_INV_WAY] + ldr r1, =0xffff + ands r0, r0, r1 + bne wait +#ifdef CONFIG_PL310_ERRATA_727915 + mov r0, #0x00 + mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX + DO_SMC +#endif +l2x_sync: + bl omap4_get_l2cache_base + mov r2, r0 + mov r0, #0x0 + str r0, [r2, #L2X0_CACHE_SYNC] +sync: + ldr r0, [r2, #L2X0_CACHE_SYNC] + ands r0, r0, #0x1 + bne sync +#endif + +do_WFI: + bl omap_do_wfi + + /* + * CPU is here when it failed to enter OFF/DORMANT or + * no low power state was attempted. + */ + mrc p15, 0, r0, c1, c0, 0 + tst r0, #(1 << 2) @ Check C bit enabled? + orreq r0, r0, #(1 << 2) @ Enable the C bit + mcreq p15, 0, r0, c1, c0, 0 + isb + + /* + * Ensure the CPU power state is set to NORMAL in + * SCU power state so that CPU is back in coherency. + * In non-coherent mode CPU can lock-up and lead to + * system deadlock. + */ + mrc p15, 0, r0, c1, c0, 1 + tst r0, #(1 << 6) @ Check SMP bit enabled? + orreq r0, r0, #(1 << 6) + mcreq p15, 0, r0, c1, c0, 1 + isb + bl omap4_get_sar_ram_base + mov r8, r0 + ldr r9, [r8, #OMAP_TYPE_OFFSET] + cmp r9, #0x1 @ Check for HS device + bne scu_gp_clear + mov r0, #SCU_PM_NORMAL + mov r1, #0x00 + stmfd r13!, {r4-r12, r14} + ldr r12, =OMAP4_MON_SCU_PWR_INDEX + DO_SMC + ldmfd r13!, {r4-r12, r14} + b skip_scu_gp_clear +scu_gp_clear: + bl omap4_get_scu_base + mov r1, #SCU_PM_NORMAL + bl scu_power_mode +skip_scu_gp_clear: + isb + dsb + ldmfd sp!, {pc} +ENDPROC(omap4_finish_suspend) + +/* + * ============================ + * == CPU resume entry point == + * ============================ + * + * void omap4_cpu_resume(void) + * + * ROM code jumps to this function while waking up from CPU + * OFF or DORMANT state. Physical address of the function is + * stored in the SAR RAM while entering to OFF or DORMANT mode. + * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. + */ +ENTRY(omap4_cpu_resume) + /* + * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device. + * OMAP44XX EMU/HS devices - CPU0 SMP bit access is enabled in PPA + * init and for CPU1, a secure PPA API provided. CPU0 must be ON + * while executing NS_SMP API on CPU1 and PPA version must be 1.4.0+. + * OMAP443X GP devices- SMP bit isn't accessible. + * OMAP446X GP devices - SMP bit access is enabled on both CPUs. + */ + ldr r8, =OMAP44XX_SAR_RAM_BASE + ldr r9, [r8, #OMAP_TYPE_OFFSET] + cmp r9, #0x1 @ Skip if GP device + bne skip_ns_smp_enable + mrc p15, 0, r0, c0, c0, 5 + ands r0, r0, #0x0f + beq skip_ns_smp_enable +ppa_actrl_retry: + mov r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX + adr r3, ppa_zero_params @ Pointer to parameters + mov r1, #0x0 @ Process ID + mov r2, #0x4 @ Flag + mov r6, #0xff + mov r12, #0x00 @ Secure Service ID + DO_SMC + cmp r0, #0x0 @ API returns 0 on success. + beq enable_smp_bit + b ppa_actrl_retry +enable_smp_bit: + mrc p15, 0, r0, c1, c0, 1 + tst r0, #(1 << 6) @ Check SMP bit enabled? + orreq r0, r0, #(1 << 6) + mcreq p15, 0, r0, c1, c0, 1 + isb +skip_ns_smp_enable: +#ifdef CONFIG_CACHE_L2X0 + /* + * Restore the L2 AUXCTRL and enable the L2 cache. + * OMAP4_MON_L2X0_AUXCTRL_INDEX = Program the L2X0 AUXCTRL + * OMAP4_MON_L2X0_CTRL_INDEX = Enable the L2 using L2X0 CTRL + * register r0 contains value to be programmed. + * L2 cache is already invalidate by ROM code as part + * of MPUSS OFF wakeup path. + */ + ldr r2, =OMAP44XX_L2CACHE_BASE + ldr r0, [r2, #L2X0_CTRL] + and r0, #0x0f + cmp r0, #1 + beq skip_l2en @ Skip if already enabled + ldr r3, =OMAP44XX_SAR_RAM_BASE + ldr r1, [r3, #OMAP_TYPE_OFFSET] + cmp r1, #0x1 @ Check for HS device + bne set_gp_por + ldr r0, =OMAP4_PPA_L2_POR_INDEX + ldr r1, =OMAP44XX_SAR_RAM_BASE + ldr r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET] + adr r3, ppa_por_params + str r4, [r3, #0x04] + mov r1, #0x0 @ Process ID + mov r2, #0x4 @ Flag + mov r6, #0xff + mov r12, #0x00 @ Secure Service ID + DO_SMC + b set_aux_ctrl +set_gp_por: + ldr r1, =OMAP44XX_SAR_RAM_BASE + ldr r0, [r1, #L2X0_PREFETCH_CTRL_OFFSET] + ldr r12, =OMAP4_MON_L2X0_PREFETCH_INDEX @ Setup L2 PREFETCH + DO_SMC +set_aux_ctrl: + ldr r1, =OMAP44XX_SAR_RAM_BASE + ldr r0, [r1, #L2X0_AUXCTRL_OFFSET] + ldr r12, =OMAP4_MON_L2X0_AUXCTRL_INDEX @ Setup L2 AUXCTRL + DO_SMC + mov r0, #0x1 + ldr r12, =OMAP4_MON_L2X0_CTRL_INDEX @ Enable L2 cache + DO_SMC +skip_l2en: +#endif + + b cpu_resume @ Jump to generic resume +ENDPROC(omap4_cpu_resume) +#endif + +#ifndef CONFIG_OMAP4_ERRATA_I688 +ENTRY(omap_bus_sync) + mov pc, lr +ENDPROC(omap_bus_sync) +#endif + +ENTRY(omap_do_wfi) + stmfd sp!, {lr} + /* Drain interconnect write buffers. */ + bl omap_bus_sync + + /* + * Execute an ISB instruction to ensure that all of the + * CP15 register changes have been committed. + */ + isb + + /* + * Execute a barrier instruction to ensure that all cache, + * TLB and branch predictor maintenance operations issued + * by any CPU in the cluster have completed. + */ + dsb + dmb + + /* + * Execute a WFI instruction and wait until the + * STANDBYWFI output is asserted to indicate that the + * CPU is in idle and low power state. CPU can specualatively + * prefetch the instructions so add NOPs after WFI. Sixteen + * NOPs as per Cortex-A9 pipeline. + */ + wfi @ Wait For Interrupt + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + + ldmfd sp!, {pc} +ENDPROC(omap_do_wfi) diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index cf246b39bac7..9dd93453e563 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -26,7 +26,7 @@ #include <linux/slab.h> #include <linux/pm_runtime.h> -#include <plat/common.h> +#include "common.h" #include "pm.h" #include "smartreflex.h" diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 037b0d7d4e05..6eeff0e0ae01 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -41,7 +41,7 @@ #include <plat/dmtimer.h> #include <asm/localtimer.h> #include <asm/sched_clock.h> -#include <plat/common.h> +#include "common.h" #include <plat/omap_hwmod.h> #include <plat/omap_device.h> #include <plat/omap-pm.h> @@ -254,7 +254,6 @@ static struct omap_dm_timer clksrc; /* * clocksource */ -static DEFINE_CLOCK_DATA(cd); static cycle_t clocksource_read_cycles(struct clocksource *cs) { return (cycle_t)__omap_dm_timer_read_counter(&clksrc, 1); @@ -268,23 +267,12 @@ static struct clocksource clocksource_gpt = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static void notrace dmtimer_update_sched_clock(void) +static u32 notrace dmtimer_read_sched_clock(void) { - u32 cyc; - - cyc = __omap_dm_timer_read_counter(&clksrc, 1); - - update_sched_clock(&cd, cyc, (u32)~0); -} - -unsigned long long notrace sched_clock(void) -{ - u32 cyc = 0; - if (clksrc.reserved) - cyc = __omap_dm_timer_read_counter(&clksrc, 1); + return __omap_dm_timer_read_counter(clksrc.io_base, 1); - return cyc_to_sched_clock(&cd, cyc, (u32)~0); + return 0; } /* Setup free-running counter for clocksource */ @@ -301,7 +289,7 @@ static void __init omap2_gp_clocksource_init(int gptimer_id, __omap_dm_timer_load_start(&clksrc, OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1); - init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate); + setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate); if (clocksource_register_hz(&clocksource_gpt, clksrc.rate)) pr_err("Could not register clocksource %s\n", diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 89ae29847c59..771dc781b746 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -28,51 +28,28 @@ #include <mach/hardware.h> #include <mach/irqs.h> #include <plat/usb.h> +#include <plat/omap_device.h> #include "mux.h" #ifdef CONFIG_MFD_OMAP_USB_HOST -#define OMAP_USBHS_DEVICE "usbhs-omap" - -static struct resource usbhs_resources[] = { - { - .name = "uhh", - .flags = IORESOURCE_MEM, - }, - { - .name = "tll", - .flags = IORESOURCE_MEM, - }, - { - .name = "ehci", - .flags = IORESOURCE_MEM, - }, - { - .name = "ehci-irq", - .flags = IORESOURCE_IRQ, - }, - { - .name = "ohci", - .flags = IORESOURCE_MEM, - }, - { - .name = "ohci-irq", - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device usbhs_device = { - .name = OMAP_USBHS_DEVICE, - .id = 0, - .num_resources = ARRAY_SIZE(usbhs_resources), - .resource = usbhs_resources, -}; +#define OMAP_USBHS_DEVICE "usbhs_omap" +#define USBHS_UHH_HWMODNAME "usb_host_hs" +#define USBHS_TLL_HWMODNAME "usb_tll_hs" static struct usbhs_omap_platform_data usbhs_data; static struct ehci_hcd_omap_platform_data ehci_data; static struct ohci_hcd_omap_platform_data ohci_data; +static struct omap_device_pm_latency omap_uhhtll_latency[] = { + { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, +}; + /* MUX settings for EHCI pins */ /* * setup_ehci_io_mux - initialize IO pad mux for USBHOST @@ -508,7 +485,10 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) void __init usbhs_init(const struct usbhs_omap_board_data *pdata) { - int i; + struct omap_hwmod *oh[2]; + struct omap_device *od; + int bus_id = -1; + int i; for (i = 0; i < OMAP3_HS_USB_PORTS; i++) { usbhs_data.port_mode[i] = pdata->port_mode[i]; @@ -523,44 +503,34 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) usbhs_data.ohci_data = &ohci_data; if (cpu_is_omap34xx()) { - usbhs_resources[0].start = OMAP34XX_UHH_CONFIG_BASE; - usbhs_resources[0].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1; - usbhs_resources[1].start = OMAP34XX_USBTLL_BASE; - usbhs_resources[1].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1; - usbhs_resources[2].start = OMAP34XX_EHCI_BASE; - usbhs_resources[2].end = OMAP34XX_EHCI_BASE + SZ_1K - 1; - usbhs_resources[3].start = INT_34XX_EHCI_IRQ; - usbhs_resources[4].start = OMAP34XX_OHCI_BASE; - usbhs_resources[4].end = OMAP34XX_OHCI_BASE + SZ_1K - 1; - usbhs_resources[5].start = INT_34XX_OHCI_IRQ; setup_ehci_io_mux(pdata->port_mode); setup_ohci_io_mux(pdata->port_mode); } else if (cpu_is_omap44xx()) { - usbhs_resources[0].start = OMAP44XX_UHH_CONFIG_BASE; - usbhs_resources[0].end = OMAP44XX_UHH_CONFIG_BASE + SZ_1K - 1; - usbhs_resources[1].start = OMAP44XX_USBTLL_BASE; - usbhs_resources[1].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1; - usbhs_resources[2].start = OMAP44XX_HSUSB_EHCI_BASE; - usbhs_resources[2].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1; - usbhs_resources[3].start = OMAP44XX_IRQ_EHCI; - usbhs_resources[4].start = OMAP44XX_HSUSB_OHCI_BASE; - usbhs_resources[4].end = OMAP44XX_HSUSB_OHCI_BASE + SZ_1K - 1; - usbhs_resources[5].start = OMAP44XX_IRQ_OHCI; setup_4430ehci_io_mux(pdata->port_mode); setup_4430ohci_io_mux(pdata->port_mode); } - if (platform_device_add_data(&usbhs_device, - &usbhs_data, sizeof(usbhs_data)) < 0) { - printk(KERN_ERR "USBHS platform_device_add_data failed\n"); - goto init_end; + oh[0] = omap_hwmod_lookup(USBHS_UHH_HWMODNAME); + if (!oh[0]) { + pr_err("Could not look up %s\n", USBHS_UHH_HWMODNAME); + return; } - if (platform_device_register(&usbhs_device) < 0) - printk(KERN_ERR "USBHS platform_device_register failed\n"); + oh[1] = omap_hwmod_lookup(USBHS_TLL_HWMODNAME); + if (!oh[1]) { + pr_err("Could not look up %s\n", USBHS_TLL_HWMODNAME); + return; + } -init_end: - return; + od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, + (void *)&usbhs_data, sizeof(usbhs_data), + omap_uhhtll_latency, + ARRAY_SIZE(omap_uhhtll_latency), false); + if (IS_ERR(od)) { + pr_err("Could not build hwmod devices %s,%s\n", + USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME); + return; + } } #else @@ -570,5 +540,3 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) } #endif - - diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 267975086a7b..8d5ed775dd56 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -93,6 +93,9 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) if (cpu_is_omap3517() || cpu_is_omap3505()) { oh_name = "am35x_otg_hs"; name = "musb-am35x"; + } else if (cpu_is_ti81xx()) { + oh_name = "usb_otg_hs"; + name = "musb-ti81xx"; } else { oh_name = "usb_otg_hs"; name = "musb-omap2430"; diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c index cfe348e1af0e..a5ec7f8f2ea8 100644 --- a/arch/arm/mach-omap2/vc3xxx_data.c +++ b/arch/arm/mach-omap2/vc3xxx_data.c @@ -18,7 +18,7 @@ #include <linux/err.h> #include <linux/init.h> -#include <plat/common.h> +#include "common.h" #include "prm-regbits-34xx.h" #include "voltage.h" diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c index 2740a968145e..d70b930f2739 100644 --- a/arch/arm/mach-omap2/vc44xx_data.c +++ b/arch/arm/mach-omap2/vc44xx_data.c @@ -18,7 +18,7 @@ #include <linux/err.h> #include <linux/init.h> -#include <plat/common.h> +#include "common.h" #include "prm44xx.h" #include "prm-regbits-44xx.h" diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 1f8fdf736e63..8a36342e60d2 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -27,7 +27,7 @@ #include <linux/slab.h> #include <linux/clk.h> -#include <plat/common.h> +#include "common.h" #include "prm-regbits-34xx.h" #include "prm-regbits-44xx.h" diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index 071101debbbc..c005e2f5e383 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -18,7 +18,7 @@ #include <linux/err.h> #include <linux/init.h> -#include <plat/common.h> +#include "common.h" #include <plat/cpu.h> #include "prm-regbits-34xx.h" @@ -31,6 +31,14 @@ * VDD data */ +/* OMAP3-common voltagedomain data */ + +static struct voltagedomain omap3_voltdm_wkup = { + .name = "wakeup", +}; + +/* 34xx/36xx voltagedomain data */ + static const struct omap_vfsm_instance omap3_vdd1_vfsm = { .voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET, .voltsetup_mask = OMAP3430_SETUP_TIME1_MASK, @@ -63,10 +71,6 @@ static struct voltagedomain omap3_voltdm_core = { .vp = &omap3_vp_core, }; -static struct voltagedomain omap3_voltdm_wkup = { - .name = "wakeup", -}; - static struct voltagedomain *voltagedomains_omap3[] __initdata = { &omap3_voltdm_mpu, &omap3_voltdm_core, @@ -74,11 +78,30 @@ static struct voltagedomain *voltagedomains_omap3[] __initdata = { NULL, }; +/* AM35xx voltagedomain data */ + +static struct voltagedomain am35xx_voltdm_mpu = { + .name = "mpu_iva", +}; + +static struct voltagedomain am35xx_voltdm_core = { + .name = "core", +}; + +static struct voltagedomain *voltagedomains_am35xx[] __initdata = { + &am35xx_voltdm_mpu, + &am35xx_voltdm_core, + &omap3_voltdm_wkup, + NULL, +}; + + static const char *sys_clk_name __initdata = "sys_ck"; void __init omap3xxx_voltagedomains_init(void) { struct voltagedomain *voltdm; + struct voltagedomain **voltdms; int i; /* @@ -93,8 +116,13 @@ void __init omap3xxx_voltagedomains_init(void) omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data; } - for (i = 0; voltdm = voltagedomains_omap3[i], voltdm; i++) + if (cpu_is_omap3517() || cpu_is_omap3505()) + voltdms = voltagedomains_am35xx; + else + voltdms = voltagedomains_omap3; + + for (i = 0; voltdm = voltdms[i], voltdm; i++) voltdm->sys_clk.name = sys_clk_name; - voltdm_init(voltagedomains_omap3); + voltdm_init(voltdms); }; diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index c4584e9ac717..4e11d022595d 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -21,7 +21,7 @@ #include <linux/err.h> #include <linux/init.h> -#include <plat/common.h> +#include "common.h" #include "prm-regbits-44xx.h" #include "prm44xx.h" diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index 66bd700a2b98..807391d84a9d 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -1,7 +1,7 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <plat/common.h> +#include "common.h" #include "voltage.h" #include "vp.h" diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c index 260c554b1547..bd89f80089f5 100644 --- a/arch/arm/mach-omap2/vp3xxx_data.c +++ b/arch/arm/mach-omap2/vp3xxx_data.c @@ -19,7 +19,7 @@ #include <linux/err.h> #include <linux/init.h> -#include <plat/common.h> +#include "common.h" #include "prm-regbits-34xx.h" #include "voltage.h" diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c index b4e77044891e..8c031d16879e 100644 --- a/arch/arm/mach-omap2/vp44xx_data.c +++ b/arch/arm/mach-omap2/vp44xx_data.c @@ -19,7 +19,7 @@ #include <linux/err.h> #include <linux/init.h> -#include <plat/common.h> +#include "common.h" #include "prm44xx.h" #include "prm-regbits-44xx.h" diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index 5ceafdccc456..3638e5c12b7e 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -14,8 +14,8 @@ #include <linux/init.h> #include <linux/mbus.h> #include <linux/io.h> -#include <linux/errno.h> #include <mach/hardware.h> +#include <plat/addr-map.h> #include "common.h" /* @@ -41,7 +41,6 @@ /* * Generic Address Decode Windows bit settings */ -#define TARGET_DDR 0 #define TARGET_DEV_BUS 1 #define TARGET_PCI 3 #define TARGET_PCIE 4 @@ -57,27 +56,10 @@ #define ATTR_DEV_BOOT 0xf #define ATTR_SRAM 0x0 -/* - * Helpers to get DDR bank info - */ -#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x)) -#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3)) -#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3)) - -/* - * CPU Address Decode Windows registers - */ -#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x)) -#define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4)) -#define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4)) -#define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4)) -#define CPU_WIN_REMAP_HI(n) ORION5X_BRIDGE_REG(0x00c | ((n) << 4)) - - -struct mbus_dram_target_info orion5x_mbus_dram_info; static int __initdata win_alloc_count; -static int __init orion5x_cpu_win_can_remap(int win) +static int __init cpu_win_can_remap(const struct orion_addr_map_cfg *cfg, + const int win) { u32 dev, rev; @@ -91,116 +73,82 @@ static int __init orion5x_cpu_win_can_remap(int win) return 0; } -static int __init setup_cpu_win(int win, u32 base, u32 size, - u8 target, u8 attr, int remap) -{ - if (win >= 8) { - printk(KERN_ERR "setup_cpu_win: trying to allocate " - "window %d\n", win); - return -ENOSPC; - } - - writel(base & 0xffff0000, CPU_WIN_BASE(win)); - writel(((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1, - CPU_WIN_CTRL(win)); - - if (orion5x_cpu_win_can_remap(win)) { - if (remap < 0) - remap = base; - - writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win)); - writel(0, CPU_WIN_REMAP_HI(win)); - } - return 0; -} - -void __init orion5x_setup_cpu_mbus_bridge(void) -{ - int i; - int cs; +/* + * Description of the windows needed by the platform code + */ +static struct __initdata orion_addr_map_cfg addr_map_cfg = { + .num_wins = 8, + .cpu_win_can_remap = cpu_win_can_remap, + .bridge_virt_base = ORION5X_BRIDGE_VIRT_BASE, +}; +static const struct __initdata orion_addr_map_info addr_map_info[] = { /* - * First, disable and clear windows. + * Setup windows for PCI+PCIe IO+MEM space. */ - for (i = 0; i < 8; i++) { - writel(0, CPU_WIN_BASE(i)); - writel(0, CPU_WIN_CTRL(i)); - if (orion5x_cpu_win_can_remap(i)) { - writel(0, CPU_WIN_REMAP_LO(i)); - writel(0, CPU_WIN_REMAP_HI(i)); - } - } + { 0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE, + TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE + }, + { 1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE, + TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE + }, + { 2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE, + TARGET_PCIE, ATTR_PCIE_MEM, -1 + }, + { 3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE, + TARGET_PCI, ATTR_PCI_MEM, -1 + }, + /* End marker */ + { -1, 0, 0, 0, 0, 0 } +}; +void __init orion5x_setup_cpu_mbus_bridge(void) +{ /* - * Setup windows for PCI+PCIe IO+MEM space. + * Disable, clear and configure windows. */ - setup_cpu_win(0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE, - TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE); - setup_cpu_win(1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE, - TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE); - setup_cpu_win(2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE, - TARGET_PCIE, ATTR_PCIE_MEM, -1); - setup_cpu_win(3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE, - TARGET_PCI, ATTR_PCI_MEM, -1); + orion_config_wins(&addr_map_cfg, addr_map_info); win_alloc_count = 4; /* * Setup MBUS dram target info. */ - orion5x_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; - - for (i = 0, cs = 0; i < 4; i++) { - u32 base = readl(DDR_BASE_CS(i)); - u32 size = readl(DDR_SIZE_CS(i)); - - /* - * Chip select enabled? - */ - if (size & 1) { - struct mbus_dram_window *w; - - w = &orion5x_mbus_dram_info.cs[cs++]; - w->cs_index = i; - w->mbus_attr = 0xf & ~(1 << i); - w->base = base & 0xffff0000; - w->size = (size | 0x0000ffff) + 1; - } - } - orion5x_mbus_dram_info.num_cs = cs; + orion_setup_cpu_mbus_target(&addr_map_cfg, ORION5X_DDR_WINDOW_CPU_BASE); } void __init orion5x_setup_dev_boot_win(u32 base, u32 size) { - setup_cpu_win(win_alloc_count++, base, size, - TARGET_DEV_BUS, ATTR_DEV_BOOT, -1); + orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size, + TARGET_DEV_BUS, ATTR_DEV_BOOT, -1); } void __init orion5x_setup_dev0_win(u32 base, u32 size) { - setup_cpu_win(win_alloc_count++, base, size, - TARGET_DEV_BUS, ATTR_DEV_CS0, -1); + orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size, + TARGET_DEV_BUS, ATTR_DEV_CS0, -1); } void __init orion5x_setup_dev1_win(u32 base, u32 size) { - setup_cpu_win(win_alloc_count++, base, size, - TARGET_DEV_BUS, ATTR_DEV_CS1, -1); + orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size, + TARGET_DEV_BUS, ATTR_DEV_CS1, -1); } void __init orion5x_setup_dev2_win(u32 base, u32 size) { - setup_cpu_win(win_alloc_count++, base, size, - TARGET_DEV_BUS, ATTR_DEV_CS2, -1); + orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size, + TARGET_DEV_BUS, ATTR_DEV_CS2, -1); } void __init orion5x_setup_pcie_wa_win(u32 base, u32 size) { - setup_cpu_win(win_alloc_count++, base, size, - TARGET_PCIE, ATTR_PCIE_WA, -1); + orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size, + TARGET_PCIE, ATTR_PCIE_WA, -1); } -int __init orion5x_setup_sram_win(void) +void __init orion5x_setup_sram_win(void) { - return setup_cpu_win(win_alloc_count++, ORION5X_SRAM_PHYS_BASE, - ORION5X_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1); + orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, + ORION5X_SRAM_PHYS_BASE, ORION5X_SRAM_SIZE, + TARGET_SRAM, ATTR_SRAM, -1); } diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 22ace0bf2f92..0e28bae20bd4 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -15,9 +15,9 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/serial_8250.h> -#include <linux/mbus.h> #include <linux/mv643xx_i2c.h> #include <linux/ata_platform.h> +#include <linux/delay.h> #include <net/dsa.h> #include <asm/page.h> #include <asm/setup.h> @@ -31,6 +31,7 @@ #include <plat/orion_nand.h> #include <plat/time.h> #include <plat/common.h> +#include <plat/addr-map.h> #include "common.h" /***************************************************************************** @@ -71,8 +72,7 @@ void __init orion5x_map_io(void) ****************************************************************************/ void __init orion5x_ehci0_init(void) { - orion_ehci_init(&orion5x_mbus_dram_info, - ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL); + orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL); } @@ -81,8 +81,7 @@ void __init orion5x_ehci0_init(void) ****************************************************************************/ void __init orion5x_ehci1_init(void) { - orion_ehci_1_init(&orion5x_mbus_dram_info, - ORION5X_USB1_PHYS_BASE, IRQ_ORION5X_USB1_CTRL); + orion_ehci_1_init(ORION5X_USB1_PHYS_BASE, IRQ_ORION5X_USB1_CTRL); } @@ -91,7 +90,7 @@ void __init orion5x_ehci1_init(void) ****************************************************************************/ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) { - orion_ge00_init(eth_data, &orion5x_mbus_dram_info, + orion_ge00_init(eth_data, ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM, IRQ_ORION5X_ETH_ERR, orion5x_tclk); } @@ -121,8 +120,7 @@ void __init orion5x_i2c_init(void) ****************************************************************************/ void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data) { - orion_sata_init(sata_data, &orion5x_mbus_dram_info, - ORION5X_SATA_PHYS_BASE, IRQ_ORION5X_SATA); + orion_sata_init(sata_data, ORION5X_SATA_PHYS_BASE, IRQ_ORION5X_SATA); } @@ -158,8 +156,7 @@ void __init orion5x_uart1_init(void) ****************************************************************************/ void __init orion5x_xor_init(void) { - orion_xor0_init(&orion5x_mbus_dram_info, - ORION5X_XOR_PHYS_BASE, + orion_xor0_init(ORION5X_XOR_PHYS_BASE, ORION5X_XOR_PHYS_BASE + 0x200, IRQ_ORION5X_XOR0, IRQ_ORION5X_XOR1); } @@ -169,12 +166,7 @@ void __init orion5x_xor_init(void) ****************************************************************************/ static void __init orion5x_crypto_init(void) { - int ret; - - ret = orion5x_setup_sram_win(); - if (ret) - return; - + orion5x_setup_sram_win(); orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE, SZ_8K, IRQ_ORION5X_CESA); } @@ -304,6 +296,17 @@ void __init orion5x_init(void) orion5x_wdt_init(); } +void orion5x_restart(char mode, const char *cmd) +{ + /* + * Enable and issue soft reset + */ + orion5x_setbits(RSTOUTn_MASK, (1 << 2)); + orion5x_setbits(CPU_SOFT_RESET, 1); + mdelay(200); + orion5x_clrbits(CPU_SOFT_RESET, 1); +} + /* * Many orion-based systems have buggy bootloader implementations. * This is a common fixup for bogus memory tags. diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 909489f4d23e..d2513ac79ff5 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -20,14 +20,13 @@ extern struct sys_timer orion5x_timer; * functions to map its interfaces and by the machine-setup to map its on- * board devices. Details in /mach-orion/addr-map.c */ -extern struct mbus_dram_target_info orion5x_mbus_dram_info; void orion5x_setup_cpu_mbus_bridge(void); void orion5x_setup_dev_boot_win(u32 base, u32 size); void orion5x_setup_dev0_win(u32 base, u32 size); void orion5x_setup_dev1_win(u32 base, u32 size); void orion5x_setup_dev2_win(u32 base, u32 size); void orion5x_setup_pcie_wa_win(u32 base, u32 size); -int orion5x_setup_sram_win(void); +void orion5x_setup_sram_win(void); void orion5x_ehci0_init(void); void orion5x_ehci1_init(void); @@ -39,6 +38,7 @@ void orion5x_spi_init(void); void orion5x_uart0_init(void); void orion5x_uart1_init(void); void orion5x_xor_init(void); +void orion5x_restart(char, const char *); /* * PCIe/PCI functions. diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c index 8c8300951f46..d75dcfa0f01c 100644 --- a/arch/arm/mach-orion5x/d2net-setup.c +++ b/arch/arm/mach-orion5x/d2net-setup.c @@ -343,6 +343,7 @@ MACHINE_START(D2NET, "LaCie d2 Network") .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END #endif @@ -355,6 +356,7 @@ MACHINE_START(BIGDISK, "LaCie Big Disk Network") .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END #endif diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index 4b79a80d5e1f..a104d5a80e11 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -364,4 +364,5 @@ MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board") .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, + .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 343f60e9639f..91b0f4788597 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -736,4 +736,5 @@ MACHINE_START(DNS323, "D-Link DNS-323") .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c index 70a4e9265f06..355e962137c7 100644 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ b/arch/arm/mach-orion5x/edmini_v2-setup.c @@ -258,4 +258,5 @@ MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2") .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h index c5196101a237..e9d9afdc2659 100644 --- a/arch/arm/mach-orion5x/include/mach/io.h +++ b/arch/arm/mach-orion5x/include/mach/io.h @@ -15,31 +15,6 @@ #define IO_SPACE_LIMIT 0xffffffff -static inline void __iomem * -__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype) -{ - void __iomem *retval; - unsigned long offs = paddr - ORION5X_REGS_PHYS_BASE; - if (mtype == MT_DEVICE && size && offs < ORION5X_REGS_SIZE && - size <= ORION5X_REGS_SIZE && offs + size <= ORION5X_REGS_SIZE) { - retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + offs; - } else { - retval = __arm_ioremap(paddr, size, mtype); - } - - return retval; -} - -static inline void -__arch_iounmap(void __iomem *addr) -{ - if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE || - addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE)) - __iounmap(addr); -} - -#define __arch_ioremap __arch_ioremap -#define __arch_iounmap __arch_iounmap #define __io(a) __typesafe_io(a) #define __mem_pci(a) (a) diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 0a28bbc76891..2745f5d95b3f 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -69,7 +69,7 @@ ******************************************************************************/ #define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000) - +#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE | 0x1500) #define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000) #define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000) #define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x)) diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h index a1d6e46ab035..825a2650cefa 100644 --- a/arch/arm/mach-orion5x/include/mach/system.h +++ b/arch/arm/mach-orion5x/include/mach/system.h @@ -11,23 +11,9 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <mach/bridge-regs.h> - static inline void arch_idle(void) { cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ - /* - * Enable and issue soft reset - */ - orion5x_setbits(RSTOUTn_MASK, (1 << 2)); - orion5x_setbits(CPU_SOFT_RESET, 1); - mdelay(200); - orion5x_clrbits(CPU_SOFT_RESET, 1); -} - - #endif diff --git a/arch/arm/mach-orion5x/include/mach/vmalloc.h b/arch/arm/mach-orion5x/include/mach/vmalloc.h deleted file mode 100644 index 06b50aeff7b9..000000000000 --- a/arch/arm/mach-orion5x/include/mach/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-orion5x/include/mach/vmalloc.h - */ - -#define VMALLOC_END 0xfd800000UL diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index d3cd3f63258a..47587b832842 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -386,6 +386,7 @@ MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END #endif @@ -399,5 +400,6 @@ MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live") .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END #endif diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c index 9503fff404e3..527213169db0 100644 --- a/arch/arm/mach-orion5x/ls-chl-setup.c +++ b/arch/arm/mach-orion5x/ls-chl-setup.c @@ -140,7 +140,7 @@ static struct mv_sata_platform_data lschl_sata_data = { static void lschl_power_off(void) { - arm_machine_restart('h', NULL); + orion5x_restart('h', NULL); } /***************************************************************************** @@ -325,4 +325,5 @@ MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)") .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c index ed6d772f4a24..9a8697b97dd7 100644 --- a/arch/arm/mach-orion5x/ls_hgl-setup.c +++ b/arch/arm/mach-orion5x/ls_hgl-setup.c @@ -186,7 +186,7 @@ static struct mv_sata_platform_data ls_hgl_sata_data = { static void ls_hgl_power_off(void) { - arm_machine_restart('h', NULL); + orion5x_restart('h', NULL); } @@ -272,4 +272,5 @@ MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL") .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c index 743f7f1db181..09c73659f467 100644 --- a/arch/arm/mach-orion5x/lsmini-setup.c +++ b/arch/arm/mach-orion5x/lsmini-setup.c @@ -186,7 +186,7 @@ static struct mv_sata_platform_data lsmini_sata_data = { static void lsmini_power_off(void) { - arm_machine_restart('h', NULL); + orion5x_restart('h', NULL); } @@ -274,5 +274,6 @@ MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini") .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END #endif diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c index b6ddd7a5db6a..5b70026f478c 100644 --- a/arch/arm/mach-orion5x/mpp.c +++ b/arch/arm/mach-orion5x/mpp.c @@ -10,7 +10,6 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/mbus.h> #include <linux/io.h> #include <mach/hardware.h> #include <plat/mpp.h> diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index 6020e26b1c71..65faaa34de61 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -267,5 +267,6 @@ MACHINE_START(MSS2, "Maxtor Shared Storage II") .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, - .fixup = tag_fixup_mem32 + .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c index 201ae3676289..c87fde4deeca 100644 --- a/arch/arm/mach-orion5x/mv2120-setup.c +++ b/arch/arm/mach-orion5x/mv2120-setup.c @@ -234,5 +234,6 @@ MACHINE_START(MV2120, "HP Media Vault mv2120") .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, - .fixup = tag_fixup_mem32 + .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c index 6197c79a2ecb..0180c393c711 100644 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -426,5 +426,6 @@ MACHINE_START(NET2BIG, "LaCie 2Big Network") .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index bc4a920e26ee..09a045f0c406 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -18,6 +18,7 @@ #include <asm/irq.h> #include <asm/mach/pci.h> #include <plat/pcie.h> +#include <plat/addr-map.h> #include "common.h" /***************************************************************************** @@ -145,7 +146,7 @@ static int __init pcie_setup(struct pci_sys_data *sys) /* * Generic PCIe unit setup. */ - orion_pcie_setup(PCIE_BASE, &orion5x_mbus_dram_info); + orion_pcie_setup(PCIE_BASE); /* * Check whether to apply Orion-1/Orion-NAS PCIe config @@ -176,7 +177,7 @@ static int __init pcie_setup(struct pci_sys_data *sys) res[0].end = res[0].start + ORION5X_PCIE_IO_SIZE - 1; if (request_resource(&ioport_resource, &res[0])) panic("Request PCIe IO resource failed\n"); - sys->resource[0] = &res[0]; + pci_add_resource(&sys->resources, &res[0]); /* * IORESOURCE_MEM @@ -187,9 +188,8 @@ static int __init pcie_setup(struct pci_sys_data *sys) res[1].end = res[1].start + ORION5X_PCIE_MEM_SIZE - 1; if (request_resource(&iomem_resource, &res[1])) panic("Request PCIe Memory resource failed\n"); - sys->resource[1] = &res[1]; + pci_add_resource(&sys->resources, &res[1]); - sys->resource[2] = NULL; sys->io_offset = 0; return 1; @@ -477,7 +477,7 @@ static int __init pci_setup(struct pci_sys_data *sys) /* * Point PCI unit MBUS decode windows to DRAM space. */ - orion5x_setup_pci_wins(&orion5x_mbus_dram_info); + orion5x_setup_pci_wins(&orion_mbus_dram_info); /* * Master + Slave enable @@ -505,7 +505,7 @@ static int __init pci_setup(struct pci_sys_data *sys) res[0].end = res[0].start + ORION5X_PCI_IO_SIZE - 1; if (request_resource(&ioport_resource, &res[0])) panic("Request PCI IO resource failed\n"); - sys->resource[0] = &res[0]; + pci_add_resource(&sys->resources, &res[0]); /* * IORESOURCE_MEM @@ -516,9 +516,8 @@ static int __init pci_setup(struct pci_sys_data *sys) res[1].end = res[1].start + ORION5X_PCI_MEM_SIZE - 1; if (request_resource(&iomem_resource, &res[1])) panic("Request PCI Memory resource failed\n"); - sys->resource[1] = &res[1]; + pci_add_resource(&sys->resources, &res[1]); - sys->resource[2] = NULL; sys->io_offset = 0; return 1; @@ -579,9 +578,11 @@ struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys struct pci_bus *bus; if (nr == 0) { - bus = pci_scan_bus(sys->busnr, &pcie_ops, sys); + bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys, + &sys->resources); } else if (nr == 1 && !orion5x_pci_disabled) { - bus = pci_scan_bus(sys->busnr, &pci_ops, sys); + bus = pci_scan_root_bus(NULL, sys->busnr, &pci_ops, sys, + &sys->resources); } else { bus = NULL; BUG(); diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index ebd6767d8e88..292038fc59fd 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -175,4 +175,5 @@ MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design") .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index 05db2d336b08..c44eabaabc16 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -187,4 +187,5 @@ MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design") .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index e47fa0578ae3..96438b6b2022 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -311,4 +311,5 @@ MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, + .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c index 64317251ec00..2c5fab00d205 100644 --- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c @@ -128,4 +128,5 @@ MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design") .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index 29f1526f7b70..632a861ef82b 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c @@ -364,4 +364,5 @@ MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live") .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index 31e51f9b4b64..5d6408745582 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -178,7 +178,7 @@ static struct hw_pci qnap_ts209_pci __initdata = { static int __init qnap_ts209_pci_init(void) { - if (machine_is_ts_x09()) + if (machine_is_ts209()) pci_common_init(&qnap_ts209_pci); return 0; @@ -329,4 +329,5 @@ MACHINE_START(TS209, "QNAP TS-109/TS-209") .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 0fbcc14e09d7..4e6ff759cd32 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -318,4 +318,5 @@ MACHINE_START(TS409, "QNAP TS-409") .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index b35e2005a348..c96f37472eda 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -627,4 +627,5 @@ MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC") .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, + .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index b8be7d8d0cf4..078c03f7cd52 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -179,4 +179,5 @@ MACHINE_START(WNR854T, "Netgear WNR854T") .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index faf81a039360..46a9778171ce 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -267,4 +267,5 @@ MACHINE_START(WRT350N_V2, "Linksys WRT350N v2") .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, + .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-picoxcell/Makefile b/arch/arm/mach-picoxcell/Makefile index c550b6363488..e5ec4a8d9bcb 100644 --- a/arch/arm/mach-picoxcell/Makefile +++ b/arch/arm/mach-picoxcell/Makefile @@ -1,3 +1,2 @@ obj-y := common.o obj-y += time.o -obj-y += io.o diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c index 34d08347be5f..a2e8ae8b5821 100644 --- a/arch/arm/mach-picoxcell/common.c +++ b/arch/arm/mach-picoxcell/common.c @@ -7,23 +7,59 @@ * * All enquiries to support@picochip.com */ +#include <linux/delay.h> #include <linux/irq.h> #include <linux/irqdomain.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/hardware/vic.h> +#include <asm/mach/map.h> #include <mach/map.h> #include <mach/picoxcell_soc.h> #include "common.h" +#define WDT_CTRL_REG_EN_MASK (1 << 0) +#define WDT_CTRL_REG_OFFS (0x00) +#define WDT_TIMEOUT_REG_OFFS (0x04) +static void __iomem *wdt_regs; + +/* + * The machine restart method can be called from an atomic context so we won't + * be able to ioremap the regs then. + */ +static void picoxcell_setup_restart(void) +{ + struct device_node *np = of_find_compatible_node(NULL, NULL, + "snps,dw-apb-wdg"); + if (WARN(!np, "unable to setup watchdog restart")) + return; + + wdt_regs = of_iomap(np, 0); + WARN(!wdt_regs, "failed to remap watchdog regs"); +} + +static struct map_desc io_map __initdata = { + .virtual = PHYS_TO_IO(PICOXCELL_PERIPH_BASE), + .pfn = __phys_to_pfn(PICOXCELL_PERIPH_BASE), + .length = PICOXCELL_PERIPH_LENGTH, + .type = MT_DEVICE, +}; + +static void __init picoxcell_map_io(void) +{ + iotable_init(&io_map, 1); +} + static void __init picoxcell_init_machine(void) { of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + picoxcell_setup_restart(); } static const char *picoxcell_dt_match[] = { @@ -33,23 +69,36 @@ static const char *picoxcell_dt_match[] = { }; static const struct of_device_id vic_of_match[] __initconst = { - { .compatible = "arm,pl192-vic" }, + { .compatible = "arm,pl192-vic", .data = vic_of_init, }, { /* Sentinel */ } }; static void __init picoxcell_init_irq(void) { - vic_init(IO_ADDRESS(PICOXCELL_VIC0_BASE), 0, ~0, 0); - vic_init(IO_ADDRESS(PICOXCELL_VIC1_BASE), 32, ~0, 0); - irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC0_BASE, 0); - irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC1_BASE, 32); + of_irq_init(vic_of_match); +} + +static void picoxcell_wdt_restart(char mode, const char *cmd) +{ + /* + * Configure the watchdog to reset with the shortest possible timeout + * and give it chance to do the reset. + */ + if (wdt_regs) { + writel_relaxed(WDT_CTRL_REG_EN_MASK, wdt_regs + WDT_CTRL_REG_OFFS); + writel_relaxed(0, wdt_regs + WDT_TIMEOUT_REG_OFFS); + /* No sleeping, possibly atomic. */ + mdelay(500); + } } DT_MACHINE_START(PICOXCELL, "Picochip picoXcell") .map_io = picoxcell_map_io, - .nr_irqs = ARCH_NR_IRQS, + .nr_irqs = NR_IRQS_LEGACY, .init_irq = picoxcell_init_irq, + .handle_irq = vic_handle_irq, .timer = &picoxcell_timer, .init_machine = picoxcell_init_machine, .dt_compat = picoxcell_dt_match, + .restart = picoxcell_wdt_restart, MACHINE_END diff --git a/arch/arm/mach-picoxcell/common.h b/arch/arm/mach-picoxcell/common.h index 5263f0fa095c..83d55ab956a4 100644 --- a/arch/arm/mach-picoxcell/common.h +++ b/arch/arm/mach-picoxcell/common.h @@ -13,6 +13,5 @@ #include <asm/mach/time.h> extern struct sys_timer picoxcell_timer; -extern void picoxcell_map_io(void); #endif /* __PICOXCELL_COMMON_H__ */ diff --git a/arch/arm/mach-picoxcell/include/mach/entry-macro.S b/arch/arm/mach-picoxcell/include/mach/entry-macro.S index a6b09f75d9df..9b505ac00be9 100644 --- a/arch/arm/mach-picoxcell/include/mach/entry-macro.S +++ b/arch/arm/mach-picoxcell/include/mach/entry-macro.S @@ -9,11 +9,8 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <mach/map.h> + .macro disable_fiq + .endm -#define VA_VIC0 IO_ADDRESS(PICOXCELL_VIC0_BASE) -#define VA_VIC1 IO_ADDRESS(PICOXCELL_VIC1_BASE) - -#include <asm/entry-macro-vic2.S> + .macro arch_ret_to_user, tmp1, tmp2 + .endm diff --git a/arch/arm/mach-picoxcell/include/mach/irqs.h b/arch/arm/mach-picoxcell/include/mach/irqs.h index 4d13ed970919..59eac1ee2820 100644 --- a/arch/arm/mach-picoxcell/include/mach/irqs.h +++ b/arch/arm/mach-picoxcell/include/mach/irqs.h @@ -1,8 +1,6 @@ /* * Copyright (c) 2011 Picochip Ltd., Jamie Iles * - * This file contains the hardware definitions of the picoXcell SoC devices. - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -16,10 +14,7 @@ #ifndef __MACH_IRQS_H #define __MACH_IRQS_H -#define ARCH_NR_IRQS 64 -#define NR_IRQS (128 + ARCH_NR_IRQS) - -#define IRQ_VIC0_BASE 0 -#define IRQ_VIC1_BASE 32 +/* We dynamically allocate our irq_desc's. */ +#define NR_IRQS 0 #endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-picoxcell/include/mach/memory.h b/arch/arm/mach-picoxcell/include/mach/memory.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/arch/arm/mach-picoxcell/include/mach/memory.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h index 67c589b0c1bc..1a5d8cb57df4 100644 --- a/arch/arm/mach-picoxcell/include/mach/system.h +++ b/arch/arm/mach-picoxcell/include/mach/system.h @@ -23,9 +23,4 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(int mode, const char *cmd) -{ - /* Watchdog reset to go here. */ -} - #endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-picoxcell/include/mach/vmalloc.h b/arch/arm/mach-picoxcell/include/mach/vmalloc.h deleted file mode 100644 index 0216cc4b1f0b..000000000000 --- a/arch/arm/mach-picoxcell/include/mach/vmalloc.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright (c) 2011 Picochip Ltd., Jamie Iles - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#define VMALLOC_END 0xfe000000UL diff --git a/arch/arm/mach-picoxcell/io.c b/arch/arm/mach-picoxcell/io.c deleted file mode 100644 index 39e9b9e8cc37..000000000000 --- a/arch/arm/mach-picoxcell/io.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (c) 2011 Picochip Ltd., Jamie Iles - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * All enquiries to support@picochip.com - */ -#include <linux/io.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/of.h> - -#include <asm/mach/map.h> - -#include <mach/map.h> -#include <mach/picoxcell_soc.h> - -#include "common.h" - -void __init picoxcell_map_io(void) -{ - struct map_desc io_map = { - .virtual = PHYS_TO_IO(PICOXCELL_PERIPH_BASE), - .pfn = __phys_to_pfn(PICOXCELL_PERIPH_BASE), - .length = PICOXCELL_PERIPH_LENGTH, - .type = MT_DEVICE, - }; - - iotable_init(&io_map, 1); -} diff --git a/arch/arm/mach-picoxcell/time.c b/arch/arm/mach-picoxcell/time.c index 90a554ff4499..6c89cf8ab22e 100644 --- a/arch/arm/mach-picoxcell/time.c +++ b/arch/arm/mach-picoxcell/time.c @@ -11,7 +11,6 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <linux/sched.h> #include <asm/mach/time.h> #include <asm/sched_clock.h> @@ -66,21 +65,11 @@ static void picoxcell_add_clocksource(struct device_node *source_timer) dw_apb_clocksource_register(cs); } -static DEFINE_CLOCK_DATA(cd); static void __iomem *sched_io_base; -unsigned long long notrace sched_clock(void) +unsigned u32 notrace picoxcell_read_sched_clock(void) { - cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0; - - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -static void notrace picoxcell_update_sched_clock(void) -{ - cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0; - - update_sched_clock(&cd, cyc, (u32)~0); + return __raw_readl(sched_io_base); } static const struct of_device_id picoxcell_rtc_ids[] __initconst = { @@ -100,7 +89,7 @@ static void picoxcell_init_sched_clock(void) timer_get_base_and_rate(sched_timer, &sched_io_base, &rate); of_node_put(sched_timer); - init_sched_clock(&cd, picoxcell_update_sched_clock, 32, rate); + setup_sched_clock(picoxcell_read_sched_clock, 32, rate); } static const struct of_device_id picoxcell_timer_ids[] __initconst = { diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c index cdb95e726f5c..4cfb40b2ec19 100644 --- a/arch/arm/mach-pnx4008/core.c +++ b/arch/arm/mach-pnx4008/core.c @@ -260,6 +260,11 @@ void __init pnx4008_map_io(void) iotable_init(pnx4008_io_desc, ARRAY_SIZE(pnx4008_io_desc)); } +static void pnx4008_restart(char mode, const char *cmd) +{ + soft_restart(0); +} + extern struct sys_timer pnx4008_timer; MACHINE_START(PNX4008, "Philips PNX4008") @@ -269,4 +274,5 @@ MACHINE_START(PNX4008, "Philips PNX4008") .init_irq = pnx4008_init_irq, .init_machine = pnx4008_init, .timer = &pnx4008_timer, + .restart = pnx4008_restart, MACHINE_END diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h index 5dda2bb55f8d..60cfe7188091 100644 --- a/arch/arm/mach-pnx4008/include/mach/system.h +++ b/arch/arm/mach-pnx4008/include/mach/system.h @@ -21,18 +21,9 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <linux/io.h> -#include <mach/hardware.h> -#include <mach/platform.h> - static void arch_idle(void) { cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ - cpu_reset(0); -} - #endif diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h deleted file mode 100644 index 184913c71141..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/vmalloc.h - * - * Author: Vitaly Wool <source@mvista.com> - * - * 2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -/* - * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 8MB value just means that there will be a 8MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - */ -#define VMALLOC_END 0xd0000000UL diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h index 83e5d2128118..b28a930d4f8a 100644 --- a/arch/arm/mach-prima2/common.h +++ b/arch/arm/mach-prima2/common.h @@ -16,6 +16,7 @@ extern struct sys_timer sirfsoc_timer; extern void __init sirfsoc_of_irq_init(void); extern void __init sirfsoc_of_clk_init(void); +extern void sirfsoc_restart(char, const char *); #ifndef CONFIG_DEBUG_LL static inline void sirfsoc_map_lluart(void) {} diff --git a/arch/arm/mach-prima2/include/mach/map.h b/arch/arm/mach-prima2/include/mach/map.h index 66b1ae2e553f..6f243532570c 100644 --- a/arch/arm/mach-prima2/include/mach/map.h +++ b/arch/arm/mach-prima2/include/mach/map.h @@ -9,8 +9,10 @@ #ifndef __MACH_PRIMA2_MAP_H__ #define __MACH_PRIMA2_MAP_H__ -#include <mach/vmalloc.h> +#include <linux/const.h> -#define SIRFSOC_VA(x) (VMALLOC_END + ((x) & 0x00FFF000)) +#define SIRFSOC_VA_BASE _AC(0xFEC00000, UL) + +#define SIRFSOC_VA(x) (SIRFSOC_VA_BASE + ((x) & 0x00FFF000)) #endif diff --git a/arch/arm/mach-prima2/include/mach/system.h b/arch/arm/mach-prima2/include/mach/system.h index 0dbd257ad16d..2c7d2a9d0c92 100644 --- a/arch/arm/mach-prima2/include/mach/system.h +++ b/arch/arm/mach-prima2/include/mach/system.h @@ -9,21 +9,9 @@ #ifndef __MACH_SYSTEM_H__ #define __MACH_SYSTEM_H__ -#include <linux/bitops.h> -#include <mach/hardware.h> - -#define SIRFSOC_SYS_RST_BIT BIT(31) - -extern void __iomem *sirfsoc_rstc_base; - static inline void arch_idle(void) { cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ - writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base); -} - #endif diff --git a/arch/arm/mach-prima2/include/mach/vmalloc.h b/arch/arm/mach-prima2/include/mach/vmalloc.h deleted file mode 100644 index c9f90fec78e3..000000000000 --- a/arch/arm/mach-prima2/include/mach/vmalloc.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/arm/ach-prima2/include/mach/vmalloc.h - * - * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __MACH_VMALLOC_H -#define __MACH_VMALLOC_H - -#include <linux/const.h> - -#define VMALLOC_END _AC(0xFEC00000, UL) - -#endif diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c index cb53160f6c5d..26ebb57719df 100644 --- a/arch/arm/mach-prima2/pm.c +++ b/arch/arm/mach-prima2/pm.c @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/suspend.h> #include <linux/slab.h> +#include <linux/module.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_device.h> diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c index ef555c041962..02b9c05ff990 100644 --- a/arch/arm/mach-prima2/prima2.c +++ b/arch/arm/mach-prima2/prima2.c @@ -8,6 +8,7 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <asm/sizes.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <linux/of.h> @@ -39,4 +40,5 @@ MACHINE_START(PRIMA2_EVB, "prima2cb") .dma_zone_size = SZ_256M, .init_machine = sirfsoc_mach_init, .dt_compat = prima2cb_dt_match, + .restart = sirfsoc_restart, MACHINE_END diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index 492cfa8d2610..762adb73ab7c 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -68,3 +68,10 @@ int sirfsoc_reset_device(struct device *dev) return 0; } + +#define SIRFSOC_SYS_RST_BIT BIT(31) + +void sirfsoc_restart(char mode, const char *cmd) +{ + writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base); +} diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c index 4cb069fd9af2..ccdac4b6a469 100644 --- a/arch/arm/mach-pxa/am200epd.c +++ b/arch/arm/mach-pxa/am200epd.c @@ -138,7 +138,7 @@ static void am200_cleanup(struct metronomefb_par *par) { int i; - free_irq(IRQ_GPIO(RDY_GPIO_PIN), par); + free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par); for (i = 0; i < ARRAY_SIZE(gpios); i++) gpio_free(gpios[i]); @@ -292,7 +292,7 @@ static int am200_setup_irq(struct fb_info *info) { int ret; - ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq, + ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am200_handle_irq, IRQF_DISABLED|IRQF_TRIGGER_FALLING, "AM200", info->par); if (ret) diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c index fa8bad235d9f..76c4b9494031 100644 --- a/arch/arm/mach-pxa/am300epd.c +++ b/arch/arm/mach-pxa/am300epd.c @@ -176,7 +176,7 @@ static void am300_cleanup(struct broadsheetfb_par *par) { int i; - free_irq(IRQ_GPIO(RDY_GPIO_PIN), par); + free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par); for (i = 0; i < ARRAY_SIZE(gpios); i++) gpio_free(gpios[i]); @@ -240,7 +240,7 @@ static int am300_setup_irq(struct fb_info *info) int ret; struct broadsheetfb_par *par = info->par; - ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am300_handle_irq, + ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am300_handle_irq, IRQF_DISABLED|IRQF_TRIGGER_RISING, "AM300", par); if (ret) diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 4b81f59a4cba..c35456f02acb 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -13,6 +13,7 @@ * published by the Free Software Foundation. */ +#include <linux/export.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/interrupt.h> @@ -179,7 +180,7 @@ static unsigned long balloon3_ac97_pin_config[] __initdata = { }; static struct ucb1400_pdata vpac270_ucb1400_pdata = { - .irq = IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ), + .irq = PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ), }; @@ -829,4 +830,5 @@ MACHINE_START(BALLOON3, "Balloon3") .timer = &pxa_timer, .init_machine = balloon3_init, .atag_offset = 0x100, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c index 4efc16d39c79..c91727d1fe09 100644 --- a/arch/arm/mach-pxa/capc7117.c +++ b/arch/arm/mach-pxa/capc7117.c @@ -50,8 +50,8 @@ static struct resource capc7117_ide_resources[] = { .flags = IORESOURCE_MEM }, [2] = { - .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)), - .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)), + .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)), + .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING } }; @@ -80,7 +80,7 @@ static void __init capc7117_ide_init(void) static struct plat_serial8250_port ti16c752_platform_data[] = { [0] = { .mapbase = 0x14000000, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO78)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO78)), .irqflags = IRQF_TRIGGER_RISING, .flags = TI16C752_FLAGS, .iotype = UPIO_MEM, @@ -89,7 +89,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = { }, [1] = { .mapbase = 0x14000040, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO79)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO79)), .irqflags = IRQF_TRIGGER_RISING, .flags = TI16C752_FLAGS, .iotype = UPIO_MEM, @@ -98,7 +98,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = { }, [2] = { .mapbase = 0x14000080, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO80)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO80)), .irqflags = IRQF_TRIGGER_RISING, .flags = TI16C752_FLAGS, .iotype = UPIO_MEM, @@ -107,7 +107,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = { }, [3] = { .mapbase = 0x140000c0, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO81)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO81)), .irqflags = IRQF_TRIGGER_RISING, .flags = TI16C752_FLAGS, .iotype = UPIO_MEM, @@ -153,5 +153,6 @@ MACHINE_START(CAPC7117, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, - .init_machine = capc7117_init + .init_machine = capc7117_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index 13518a705399..431ef56700c4 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -33,7 +33,7 @@ /* GPIO IRQ usage */ #define GPIO83_MMC_IRQ (83) -#define CMX270_MMC_IRQ IRQ_GPIO(GPIO83_MMC_IRQ) +#define CMX270_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO83_MMC_IRQ) /* MMC power enable */ #define GPIO105_MMC_POWER (105) @@ -380,7 +380,7 @@ static struct spi_board_info cm_x270_spi_devices[] __initdata = { .modalias = "libertas_spi", .max_speed_hz = 13000000, .bus_num = 2, - .irq = gpio_to_irq(95), + .irq = PXA_GPIO_TO_IRQ(95), .chip_select = 0, .controller_data = &cm_x270_libertas_chip, .platform_data = &cm_x270_libertas_pdata, diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index f2e4190080cb..8fa4ad27edf3 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -58,8 +58,8 @@ extern void cmx270_init(void); #define CMX255_GPIO_IT8152_IRQ (0) #define CMX270_GPIO_IT8152_IRQ (22) -#define CMX255_ETHIRQ IRQ_GPIO(GPIO22_ETHIRQ) -#define CMX270_ETHIRQ IRQ_GPIO(GPIO10_ETHIRQ) +#define CMX255_ETHIRQ PXA_GPIO_TO_IRQ(GPIO22_ETHIRQ) +#define CMX270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO10_ETHIRQ) #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) static struct resource cmx255_dm9000_resource[] = { @@ -524,4 +524,5 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX") #ifdef CONFIG_PCI .dma_zone_size = SZ_64M, #endif + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index e096bba8fd57..4b981b82d2a5 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -64,7 +64,7 @@ #define GPIO82_MMC_IRQ (82) #define GPIO85_MMC_WP (85) -#define CM_X300_MMC_IRQ IRQ_GPIO(GPIO82_MMC_IRQ) +#define CM_X300_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO82_MMC_IRQ) #define GPIO95_RTC_CS (95) #define GPIO96_RTC_WR (96) @@ -229,8 +229,8 @@ static struct resource dm9000_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)), - .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)), + .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)), + .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -858,4 +858,5 @@ MACHINE_START(CM_X300, "CM-X300 module") .timer = &pxa_timer, .init_machine = cm_x300_init, .fixup = cm_x300_fixup, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index 80538b8806ed..248804bb2c9d 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -183,7 +183,7 @@ static inline void income_lcd_init(void) {} /****************************************************************************** * Backlight ******************************************************************************/ -#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE) +#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) static struct platform_pwm_backlight_data income_backlight_data = { .pwm_id = 0, .max_brightness = 0x3ff, diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 05bfa1b1c001..29d5d541f602 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -218,8 +218,8 @@ static struct resource colibri_pxa270_dm9000_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ), - .end = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING, }, }; @@ -249,7 +249,7 @@ static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = { }; static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = { - .irq = gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ), + .irq = PXA_GPIO_TO_IRQ(GPIO113_COLIBRI_PXA270_TS_IRQ), }; static struct platform_device colibri_pxa270_ucb1400_device = { @@ -313,6 +313,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC") @@ -322,5 +323,6 @@ MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index c825e8bf2db1..0846d210cb05 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -78,8 +78,8 @@ static struct resource colibri_asix_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), - .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), + .start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO), + .end = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; @@ -189,5 +189,6 @@ MACHINE_START(COLIBRI300, "Toradex Colibri PXA300") .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index d23b92b80488..6ad3359063af 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -115,8 +115,8 @@ static struct resource colibri_asix_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), - .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), + .start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO), + .end = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; @@ -259,5 +259,6 @@ MACHINE_START(COLIBRI320, "Toradex Colibri PXA320") .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 549468d088b9..66600f05e436 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -531,7 +531,7 @@ static struct spi_board_info corgi_spi_devices[] = { .chip_select = 0, .platform_data = &corgi_ads7846_info, .controller_data= &corgi_ads7846_chip, - .irq = gpio_to_irq(CORGI_GPIO_TP_INT), + .irq = PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT), }, { .modalias = "corgi-lcd", .max_speed_hz = 50000, @@ -655,7 +655,7 @@ static void corgi_poweroff(void) /* Green LED off tells the bootloader to halt */ gpio_set_value(CORGI_GPIO_LED_GREEN, 0); - arm_machine_restart('h', NULL); + pxa_restart('h', NULL); } static void corgi_restart(char mode, const char *cmd) @@ -664,13 +664,12 @@ static void corgi_restart(char mode, const char *cmd) /* Green LED on tells the bootloader to reboot */ gpio_set_value(CORGI_GPIO_LED_GREEN, 1); - arm_machine_restart('h', cmd); + pxa_restart('h', cmd); } static void __init corgi_init(void) { pm_power_off = corgi_poweroff; - arm_pm_restart = corgi_restart; /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ PCFR |= PCFR_OPDE; @@ -726,6 +725,7 @@ MACHINE_START(CORGI, "SHARP Corgi") .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, .timer = &pxa_timer, + .restart = corgi_restart, MACHINE_END #endif @@ -737,6 +737,7 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd") .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, .timer = &pxa_timer, + .restart = corgi_restart, MACHINE_END #endif @@ -748,6 +749,7 @@ MACHINE_START(HUSKY, "SHARP Husky") .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, .timer = &pxa_timer, + .restart = corgi_restart, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 29034778bfda..39e265cfc86d 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/apm-emulation.h> @@ -40,7 +41,9 @@ static struct gpio charger_gpios[] = { { CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" }, { CORGI_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" }, { CORGI_GPIO_CHRG_UKN, GPIOF_OUT_INIT_LOW, "Charger Unknown" }, + { CORGI_GPIO_AC_IN, GPIOF_IN, "Charger Detection" }, { CORGI_GPIO_KEY_INT, GPIOF_IN, "Key Interrupt" }, + { CORGI_GPIO_WAKEUP, GPIOF_IN, "System wakeup notification" }, }; static void corgi_charger_init(void) @@ -90,7 +93,12 @@ static int corgi_should_wakeup(unsigned int resume_on_alarm) { int is_resume = 0; - dev_dbg(sharpsl_pm.dev, "GPLR0 = %x,%x\n", GPLR0, PEDR); + dev_dbg(sharpsl_pm.dev, "PEDR = %x, GPIO_AC_IN = %d, " + "GPIO_CHRG_FULL = %d, GPIO_KEY_INT = %d, GPIO_WAKEUP = %d\n", + PEDR, gpio_get_value(CORGI_GPIO_AC_IN), + gpio_get_value(CORGI_GPIO_CHRG_FULL), + gpio_get_value(CORGI_GPIO_KEY_INT), + gpio_get_value(CORGI_GPIO_WAKEUP)); if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) { if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) { @@ -124,14 +132,21 @@ static int corgi_should_wakeup(unsigned int resume_on_alarm) static unsigned long corgi_charger_wakeup(void) { - return ~GPLR0 & ( GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) ); + unsigned long ret; + + ret = (!gpio_get_value(CORGI_GPIO_AC_IN) << GPIO_bit(CORGI_GPIO_AC_IN)) + | (!gpio_get_value(CORGI_GPIO_KEY_INT) + << GPIO_bit(CORGI_GPIO_KEY_INT)) + | (!gpio_get_value(CORGI_GPIO_WAKEUP) + << GPIO_bit(CORGI_GPIO_WAKEUP)); + return ret; } unsigned long corgipm_read_devdata(int type) { switch(type) { case SHARPSL_STATUS_ACIN: - return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0); + return !gpio_get_value(CORGI_GPIO_AC_IN); case SHARPSL_STATUS_LOCK: return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock); case SHARPSL_STATUS_CHRGFULL: diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 5e2cf39e9e4c..fb5a51d834e5 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -278,4 +278,5 @@ MACHINE_START(CSB726, "Cogent CSB726") .handle_irq = pxa27x_handle_irq, .init_machine = csb726_init, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 2e0425404de5..18fd177073f4 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -415,9 +415,29 @@ static struct resource pxa_rtc_resources[] = { }, }; +static struct resource sa1100_rtc_resources[] = { + [0] = { + .start = 0x40900000, + .end = 0x409000ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_RTC1Hz, + .end = IRQ_RTC1Hz, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_RTCAlrm, + .end = IRQ_RTCAlrm, + .flags = IORESOURCE_IRQ, + }, +}; + struct platform_device sa1100_device_rtc = { .name = "sa1100-rtc", .id = -1, + .num_resources = ARRAY_SIZE(sa1100_rtc_resources), + .resource = sa1100_rtc_resources, }; struct platform_device pxa_device_rtc = { @@ -1051,6 +1071,36 @@ struct platform_device pxa3xx_device_ssp4 = { }; #endif /* CONFIG_PXA3xx || CONFIG_PXA95x */ +struct resource pxa_resource_gpio[] = { + { + .start = 0x40e00000, + .end = 0x40e0ffff, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_GPIO0, + .end = IRQ_GPIO0, + .name = "gpio0", + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_GPIO1, + .end = IRQ_GPIO1, + .name = "gpio1", + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_GPIO_2_x, + .end = IRQ_GPIO_2_x, + .name = "gpio_mux", + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa_device_gpio = { + .name = "pxa-gpio", + .id = -1, + .num_resources = ARRAY_SIZE(pxa_resource_gpio), + .resource = pxa_resource_gpio, +}; + /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1. * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */ void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info) diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 2fd5a8b35757..1475db107254 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -16,6 +16,7 @@ extern struct platform_device pxa_device_ficp; extern struct platform_device sa1100_device_rtc; extern struct platform_device pxa_device_rtc; extern struct platform_device pxa_device_ac97; +extern struct platform_device pxa_device_gpio; extern struct platform_device pxa27x_device_i2c_power; extern struct platform_device pxa27x_device_ohci; diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 94acc0b01dd6..d80c0ba9a095 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -70,7 +70,7 @@ /* common GPIOs */ #define GPIO11_NAND_CS (11) #define GPIO41_ETHIRQ (41) -#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ) +#define EM_X270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO41_ETHIRQ) #define GPIO115_WLAN_PWEN (115) #define GPIO19_WLAN_STRAP (19) #define GPIO9_USB_VBUS_EN (9) @@ -805,7 +805,7 @@ static struct spi_board_info em_x270_spi_devices[] __initdata = { .modalias = "libertas_spi", .max_speed_hz = 13000000, .bus_num = 2, - .irq = IRQ_GPIO(116), + .irq = PXA_GPIO_TO_IRQ(116), .chip_select = 0, .controller_data = &em_x270_libertas_chip, .platform_data = &em_x270_libertas_pdata, @@ -1203,7 +1203,7 @@ static struct da903x_platform_data em_x270_da9030_info = { static struct i2c_board_info em_x270_i2c_pmic_info = { I2C_BOARD_INFO("da9030", 0x49), - .irq = IRQ_GPIO(0), + .irq = PXA_GPIO_TO_IRQ(0), .platform_data = &em_x270_da9030_info, }; @@ -1305,6 +1305,7 @@ MACHINE_START(EM_X270, "Compulab EM-X270") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = em_x270_init, + .restart = pxa_restart, MACHINE_END MACHINE_START(EXEDA, "Compulab eXeda") @@ -1314,4 +1315,5 @@ MACHINE_START(EXEDA, "Compulab eXeda") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = em_x270_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index d82b7aa3c096..f79a610c62fc 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -119,8 +119,8 @@ struct resource eseries_tmio_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ), - .end = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ), .flags = IORESOURCE_IRQ, }, }; @@ -196,6 +196,7 @@ MACHINE_START(E330, "Toshiba e330") .fixup = eseries_fixup, .init_machine = e330_init, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END #endif @@ -246,6 +247,7 @@ MACHINE_START(E350, "Toshiba e350") .fixup = eseries_fixup, .init_machine = e350_init, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END #endif @@ -369,6 +371,7 @@ MACHINE_START(E400, "Toshiba e400") .fixup = eseries_fixup, .init_machine = e400_init, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END #endif @@ -558,6 +561,7 @@ MACHINE_START(E740, "Toshiba e740") .fixup = eseries_fixup, .init_machine = e740_init, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END #endif @@ -750,6 +754,7 @@ MACHINE_START(E750, "Toshiba e750") .fixup = eseries_fixup, .init_machine = e750_init, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END #endif @@ -955,5 +960,6 @@ MACHINE_START(E800, "Toshiba e800") .fixup = eseries_fixup, .init_machine = e800_init, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 8308eee5a924..15ab2533667d 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -804,6 +804,7 @@ MACHINE_START(EZX_A780, "Motorola EZX A780") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = a780_init, + .restart = pxa_restart, MACHINE_END #endif @@ -870,6 +871,7 @@ MACHINE_START(EZX_E680, "Motorola EZX E680") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = e680_init, + .restart = pxa_restart, MACHINE_END #endif @@ -936,6 +938,7 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = a1200_init, + .restart = pxa_restart, MACHINE_END #endif @@ -1127,6 +1130,7 @@ MACHINE_START(EZX_A910, "Motorola EZX A910") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = a910_init, + .restart = pxa_restart, MACHINE_END #endif @@ -1193,6 +1197,7 @@ MACHINE_START(EZX_E6, "Motorola EZX E6") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = e6_init, + .restart = pxa_restart, MACHINE_END #endif @@ -1233,5 +1238,6 @@ MACHINE_START(EZX_E2, "Motorola EZX E2") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = e2_init, + .restart = pxa_restart, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 92a2e85ab02c..0d729e6619df 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -57,3 +57,5 @@ void __init pxa_set_ffuart_info(void *info); void __init pxa_set_btuart_info(void *info); void __init pxa_set_stuart_info(void *info); void __init pxa_set_hwuart_info(void *info); + +void pxa_restart(char, const char *); diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index ffdd70dad327..ac3b1cef4751 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -239,4 +239,5 @@ MACHINE_START(GUMSTIX, "Gumstix") .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = gumstix_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index 4b5e110640b1..fde6b4c873c4 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -209,4 +209,5 @@ MACHINE_START(H5400, "HP iPAQ H5000") .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = h5000_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c index f2c324570844..26d069a9f900 100644 --- a/arch/arm/mach-pxa/himalaya.c +++ b/arch/arm/mach-pxa/himalaya.c @@ -164,4 +164,5 @@ MACHINE_START(HIMALAYA, "HTC Himalaya") .handle_irq = pxa25x_handle_irq, .init_machine = himalaya_init, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 6f6368ece9bd..fb9b62dcf4ca 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -252,8 +252,8 @@ static struct resource asic3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ), - .end = gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ), .flags = IORESOURCE_IRQ, }, /* SD part */ @@ -263,8 +263,8 @@ static struct resource asic3_resources[] = { .flags = IORESOURCE_MEM, }, [3] = { - .start = gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ), - .end = gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ), .flags = IORESOURCE_IRQ, }, }; @@ -587,7 +587,7 @@ static struct spi_board_info tsc2046_board_info[] __initdata = { .modalias = "ads7846", .bus_num = 2, .max_speed_hz = 2600000, /* 100 kHz sample rate */ - .irq = gpio_to_irq(GPIO58_HX4700_TSC2046_nPENIRQ), + .irq = PXA_GPIO_TO_IRQ(GPIO58_HX4700_TSC2046_nPENIRQ), .platform_data = &tsc2046_info, .controller_data = &tsc2046_chip, }, @@ -635,15 +635,15 @@ static struct resource power_supply_resources[] = { .name = "ac", .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, - .start = gpio_to_irq(GPIOD9_nAC_IN), - .end = gpio_to_irq(GPIOD9_nAC_IN), + .start = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), + .end = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), }, [1] = { .name = "usb", .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, - .start = gpio_to_irq(GPIOD14_nUSBC_DETECT), - .end = gpio_to_irq(GPIOD14_nUSBC_DETECT), + .start = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), + .end = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), }, }; @@ -845,4 +845,5 @@ MACHINE_START(H4700, "HP iPAQ HX4700") .handle_irq = pxa27x_handle_irq, .init_machine = hx4700_init, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index f78d5db758da..67400192ed3b 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -86,7 +86,7 @@ static struct spi_board_info mcp251x_board_info[] = { .chip_select = 0, .platform_data = &mcp251x_info, .controller_data = &mcp251x_chip_info1, - .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ1) + .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1) }, { .modalias = "mcp2515", @@ -95,7 +95,7 @@ static struct spi_board_info mcp251x_board_info[] = { .chip_select = 1, .platform_data = &mcp251x_info, .controller_data = &mcp251x_chip_info2, - .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ2) + .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2) }, { .modalias = "mcp2515", @@ -104,7 +104,7 @@ static struct spi_board_info mcp251x_board_info[] = { .chip_select = 0, .platform_data = &mcp251x_info, .controller_data = &mcp251x_chip_info3, - .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ3) + .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3) }, { .modalias = "mcp2515", @@ -113,7 +113,7 @@ static struct spi_board_info mcp251x_board_info[] = { .chip_select = 1, .platform_data = &mcp251x_info, .controller_data = &mcp251x_chip_info4, - .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ4) + .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4) } }; @@ -196,5 +196,6 @@ MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM") .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, - .init_machine = icontrol_init + .init_machine = icontrol_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index ddf20e5c376e..8af1840e12cc 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -75,8 +75,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_GPIO(4), - .end = IRQ_GPIO(4), + .start = PXA_GPIO_TO_IRQ(4), + .end = PXA_GPIO_TO_IRQ(4), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -199,4 +199,5 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP") .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = idp_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index 6d7eab3d0867..f02fa1e6ba86 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -172,9 +172,9 @@ enum balloon3_features { /* Balloon3 Interrupts */ #define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x)) -#define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ) -#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ) -#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD) +#define BALLOON3_AUX_NIRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_AUX_NIRQ) +#define BALLOON3_CODEC_IRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ) +#define BALLOON3_S0_CD_IRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_S0_CD) #define BALLOON3_NR_IRQS (IRQ_BOARD_START + 16) diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index 5dfd1195a5a7..f3c3493b468d 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -66,18 +66,18 @@ /* * Corgi Interrupts */ -#define CORGI_IRQ_GPIO_KEY_INT IRQ_GPIO(0) -#define CORGI_IRQ_GPIO_AC_IN IRQ_GPIO(1) -#define CORGI_IRQ_GPIO_WAKEUP IRQ_GPIO(3) -#define CORGI_IRQ_GPIO_AK_INT IRQ_GPIO(4) -#define CORGI_IRQ_GPIO_TP_INT IRQ_GPIO(5) -#define CORGI_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9) -#define CORGI_IRQ_GPIO_nSD_INT IRQ_GPIO(10) -#define CORGI_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(11) -#define CORGI_IRQ_GPIO_CF_CD IRQ_GPIO(14) -#define CORGI_IRQ_GPIO_CHRG_FULL IRQ_GPIO(16) /* Battery fully charged */ -#define CORGI_IRQ_GPIO_CF_IRQ IRQ_GPIO(17) -#define CORGI_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(58+(a)) /* Keyboard Sense lines */ +#define CORGI_IRQ_GPIO_KEY_INT PXA_GPIO_TO_IRQ(0) +#define CORGI_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(1) +#define CORGI_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(3) +#define CORGI_IRQ_GPIO_AK_INT PXA_GPIO_TO_IRQ(4) +#define CORGI_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(5) +#define CORGI_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(9) +#define CORGI_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(10) +#define CORGI_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(11) +#define CORGI_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(14) +#define CORGI_IRQ_GPIO_CHRG_FULL PXA_GPIO_TO_IRQ(16) /* Battery fully charged */ +#define CORGI_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(17) +#define CORGI_IRQ_GPIO_KEY_SENSE(a) PXA_GPIO_TO_IRQ(58+(a)) /* Keyboard Sense lines */ /* @@ -98,7 +98,7 @@ CORGI_SCP_MIC_BIAS ) #define CORGI_SCOOP_IO_OUT ( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R ) -#define CORGI_SCOOP_GPIO_BASE (NR_BUILTIN_GPIO) +#define CORGI_SCOOP_GPIO_BASE (PXA_NR_BUILTIN_GPIO) #define CORGI_GPIO_LED_GREEN (CORGI_SCOOP_GPIO_BASE + 0) #define CORGI_GPIO_SWA (CORGI_SCOOP_GPIO_BASE + 1) /* Hinge Switch A */ #define CORGI_GPIO_SWB (CORGI_SCOOP_GPIO_BASE + 2) /* Hinge Switch B */ diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/include/mach/csb726.h index 747ab1a71f2f..2628e7b72116 100644 --- a/arch/arm/mach-pxa/include/mach/csb726.h +++ b/arch/arm/mach-pxa/include/mach/csb726.h @@ -19,8 +19,8 @@ #define CSB726_FLASH_SIZE (64 * 1024 * 1024) #define CSB726_FLASH_uMON (8 * 1024 * 1024) -#define CSB726_IRQ_LAN gpio_to_irq(CSB726_GPIO_IRQ_LAN) -#define CSB726_IRQ_SM501 gpio_to_irq(CSB726_GPIO_IRQ_SM501) +#define CSB726_IRQ_LAN PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_LAN) +#define CSB726_IRQ_SM501 PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_SM501) #endif diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S index a73bc86a3c26..260c0c17692a 100644 --- a/arch/arm/mach-pxa/include/mach/entry-macro.S +++ b/arch/arm/mach-pxa/include/mach/entry-macro.S @@ -7,45 +7,9 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <mach/hardware.h> -#include <mach/irqs.h> .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mrc p15, 0, \tmp, c0, c0, 0 @ CPUID - mov \tmp, \tmp, lsr #13 - and \tmp, \tmp, #0x7 @ Core G - cmp \tmp, #1 - bhi 1002f - - @ Core Generation 1 (PXA25x) - mov \base, #io_p2v(0x40000000) @ IIR Ctl = 0x40d00000 - add \base, \base, #0x00d00000 - ldr \irqstat, [\base, #0] @ ICIP - ldr \irqnr, [\base, #4] @ ICMR - - ands \irqnr, \irqstat, \irqnr - beq 1001f - rsb \irqstat, \irqnr, #0 - and \irqstat, \irqstat, \irqnr - clz \irqnr, \irqstat - rsb \irqnr, \irqnr, #(31 + PXA_IRQ(0)) - b 1001f -1002: - @ Core Generation 2 (PXA27x) or Core Generation 3 (PXA3xx) - mrc p6, 0, \irqstat, c5, c0, 0 @ ICHP - tst \irqstat, #0x80000000 - beq 1001f - bic \irqstat, \irqstat, #0x80000000 - mov \irqnr, \irqstat, lsr #16 - add \irqnr, \irqnr, #(PXA_IRQ(0)) -1001: - .endm diff --git a/arch/arm/mach-pxa/include/mach/gpio-pxa.h b/arch/arm/mach-pxa/include/mach/gpio-pxa.h deleted file mode 100644 index 41b4c93a96c2..000000000000 --- a/arch/arm/mach-pxa/include/mach/gpio-pxa.h +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Written by Philipp Zabel <philipp.zabel@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef __MACH_PXA_GPIO_PXA_H -#define __MACH_PXA_GPIO_PXA_H - -#include <mach/irqs.h> -#include <mach/hardware.h> - -#define GPIO_REGS_VIRT io_p2v(0x40E00000) - -#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) - -/* GPIO Pin Level Registers */ -#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00) -#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00) -#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00) -#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00) - -/* GPIO Pin Direction Registers */ -#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c) -#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c) -#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c) -#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c) - -/* GPIO Pin Output Set Registers */ -#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18) -#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18) -#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18) -#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18) - -/* GPIO Pin Output Clear Registers */ -#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24) -#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24) -#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24) -#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24) - -/* GPIO Rising Edge Detect Registers */ -#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30) -#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30) -#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30) -#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30) - -/* GPIO Falling Edge Detect Registers */ -#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c) -#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c) -#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c) -#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c) - -/* GPIO Edge Detect Status Registers */ -#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48) -#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48) -#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48) -#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48) - -/* GPIO Alternate Function Select Registers */ -#define GAFR0_L GPIO_REG(0x0054) -#define GAFR0_U GPIO_REG(0x0058) -#define GAFR1_L GPIO_REG(0x005C) -#define GAFR1_U GPIO_REG(0x0060) -#define GAFR2_L GPIO_REG(0x0064) -#define GAFR2_U GPIO_REG(0x0068) -#define GAFR3_L GPIO_REG(0x006C) -#define GAFR3_U GPIO_REG(0x0070) - -/* More handy macros. The argument is a literal GPIO number. */ - -#define GPIO_bit(x) (1 << ((x) & 0x1f)) - -#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00) -#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c) -#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18) -#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24) -#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30) -#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c) -#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48) -#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) - - -#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM - -#define gpio_to_bank(gpio) ((gpio) >> 5) - -#ifdef CONFIG_CPU_PXA26x -/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, - * as well as their Alternate Function value being '1' for GPIO in GAFRx. - */ -static inline int __gpio_is_inverted(unsigned gpio) -{ - return cpu_is_pxa25x() && gpio > 85; -} -#else -static inline int __gpio_is_inverted(unsigned gpio) { return 0; } -#endif - -/* - * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate - * function of a GPIO, and GPDRx cannot be altered once configured. It - * is attributed as "occupied" here (I know this terminology isn't - * accurate, you are welcome to propose a better one :-) - */ -static inline int __gpio_is_occupied(unsigned gpio) -{ - if (cpu_is_pxa27x() || cpu_is_pxa25x()) { - int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3; - int dir = GPDR(gpio) & GPIO_bit(gpio); - - if (__gpio_is_inverted(gpio)) - return af != 1 || dir == 0; - else - return af != 0 || dir != 0; - } else - return GPDR(gpio) & GPIO_bit(gpio); -} - -#include <plat/gpio-pxa.h> -#endif /* __MACH_PXA_GPIO_PXA_H */ diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h index 004cade7bb13..0248e433bc98 100644 --- a/arch/arm/mach-pxa/include/mach/gpio.h +++ b/arch/arm/mach-pxa/include/mach/gpio.h @@ -25,24 +25,8 @@ #define __ASM_ARCH_PXA_GPIO_H #include <asm-generic/gpio.h> -/* The defines for the driver are needed for the accelerated accessors */ -#include "gpio-pxa.h" -#define gpio_to_irq(gpio) IRQ_GPIO(gpio) +#include <mach/irqs.h> +#include <mach/hardware.h> -static inline int irq_to_gpio(unsigned int irq) -{ - int gpio; - - if (irq == IRQ_GPIO0 || irq == IRQ_GPIO1) - return irq - IRQ_GPIO0; - - gpio = irq - PXA_GPIO_IRQ_BASE; - if (gpio >= 2 && gpio < NR_BUILTIN_GPIO) - return gpio; - - return -1; -} - -#include <plat/gpio.h> #endif diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h index 9b898680b206..dba14b6503ad 100644 --- a/arch/arm/mach-pxa/include/mach/gumstix.h +++ b/arch/arm/mach-pxa/include/mach/gumstix.h @@ -24,7 +24,7 @@ has detected a cable insertion; driven low otherwise. */ #define GPIO_GUMSTIX_USB_GPIOx 41 /* usb state change */ -#define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn) +#define GUMSTIX_USB_INTR_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_USB_GPIOn) #define GPIO_GUMSTIX_USB_GPIOn_MD (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN) #define GPIO_GUMSTIX_USB_GPIOx_CON_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT) @@ -35,7 +35,7 @@ has detected a cable insertion; driven low otherwise. */ */ #define GUMSTIX_GPIO_nSD_WP 22 /* SD Write Protect */ #define GUMSTIX_GPIO_nSD_DETECT 11 /* MMC/SD Card Detect */ -#define GUMSTIX_IRQ_GPIO_nSD_DETECT IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT) +#define GUMSTIX_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(GUMSTIX_GPIO_nSD_DETECT) /* * SMC Ethernet definitions @@ -49,10 +49,10 @@ has detected a cable insertion; driven low otherwise. */ #define GPIO_GUMSTIX_ETH0 36 #define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN) -#define GUMSTIX_ETH0_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH0) +#define GUMSTIX_ETH0_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0) #define GPIO_GUMSTIX_ETH1 27 #define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN) -#define GUMSTIX_ETH1_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH1) +#define GUMSTIX_ETH1_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1) /* CF reset line */ @@ -63,18 +63,18 @@ has detected a cable insertion; driven low otherwise. */ #define GPIO4_nSTSCHG GPIO4_nBVD1 #define GPIO11_nCD 11 #define GPIO26_PRDY_nBSY 26 -#define GUMSTIX_S0_nSTSCHG_IRQ IRQ_GPIO(GPIO4_nSTSCHG) -#define GUMSTIX_S0_nCD_IRQ IRQ_GPIO(GPIO11_nCD) -#define GUMSTIX_S0_PRDY_nBSY_IRQ IRQ_GPIO(GPIO26_PRDY_nBSY) +#define GUMSTIX_S0_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO4_nSTSCHG) +#define GUMSTIX_S0_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO11_nCD) +#define GUMSTIX_S0_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO26_PRDY_nBSY) /* CF slot 1 */ #define GPIO18_nBVD1 18 #define GPIO18_nSTSCHG GPIO18_nBVD1 #define GPIO36_nCD 36 #define GPIO27_PRDY_nBSY 27 -#define GUMSTIX_S1_nSTSCHG_IRQ IRQ_GPIO(GPIO18_nSTSCHG) -#define GUMSTIX_S1_nCD_IRQ IRQ_GPIO(GPIO36_nCD) -#define GUMSTIX_S1_PRDY_nBSY_IRQ IRQ_GPIO(GPIO27_PRDY_nBSY) +#define GUMSTIX_S1_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG) +#define GUMSTIX_S1_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO36_nCD) +#define GUMSTIX_S1_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY) /* CF GPIO line modes */ #define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN) diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h index 37408449ec25..8bc02913517c 100644 --- a/arch/arm/mach-pxa/include/mach/hx4700.h +++ b/arch/arm/mach-pxa/include/mach/hx4700.h @@ -15,7 +15,7 @@ #include <linux/gpio.h> #include <linux/mfd/asic3.h> -#define HX4700_ASIC3_GPIO_BASE NR_BUILTIN_GPIO +#define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO #define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS) #define HX4700_NR_IRQS (IRQ_BOARD_START + 70) diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h index 5eff96fcc944..22a96f87232b 100644 --- a/arch/arm/mach-pxa/include/mach/idp.h +++ b/arch/arm/mach-pxa/include/mach/idp.h @@ -131,28 +131,26 @@ #define PCC_VS2 (1 << 1) #define PCC_VS1 (1 << 0) -#define PCC_DETECT(x) (GPLR(7 + (x)) & GPIO_bit(7 + (x))) - /* A listing of interrupts used by external hardware devices */ -#define TOUCH_PANEL_IRQ IRQ_GPIO(5) -#define IDE_IRQ IRQ_GPIO(21) +#define TOUCH_PANEL_IRQ PXA_GPIO_TO_IRQ(5) +#define IDE_IRQ PXA_GPIO_TO_IRQ(21) #define TOUCH_PANEL_IRQ_EDGE IRQ_TYPE_EDGE_FALLING -#define ETHERNET_IRQ IRQ_GPIO(4) +#define ETHERNET_IRQ PXA_GPIO_TO_IRQ(4) #define ETHERNET_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING -#define PCMCIA_S0_CD_VALID IRQ_GPIO(7) +#define PCMCIA_S0_CD_VALID PXA_GPIO_TO_IRQ(7) #define PCMCIA_S0_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH -#define PCMCIA_S1_CD_VALID IRQ_GPIO(8) +#define PCMCIA_S1_CD_VALID PXA_GPIO_TO_IRQ(8) #define PCMCIA_S1_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH -#define PCMCIA_S0_RDYINT IRQ_GPIO(19) -#define PCMCIA_S1_RDYINT IRQ_GPIO(22) +#define PCMCIA_S0_RDYINT PXA_GPIO_TO_IRQ(19) +#define PCMCIA_S1_RDYINT PXA_GPIO_TO_IRQ(22) /* diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index 7cc5a781e99e..32975adf3ca4 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -88,10 +88,8 @@ #define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */ #define PXA_GPIO_IRQ_BASE PXA_IRQ(96) -#define PXA_GPIO_IRQ_NUM (192) - -#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) -#define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x)) +#define PXA_NR_BUILTIN_GPIO (192) +#define PXA_GPIO_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) /* * The following interrupts are for board specific purposes. Since @@ -100,7 +98,7 @@ * By default, no board IRQ is reserved. It should be finished in * custom board since sparse IRQ is already enabled. */ -#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM) +#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_NR_BUILTIN_GPIO) #define NR_IRQS (IRQ_BOARD_START) diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h index b6238cbd8aea..8066be54e9f5 100644 --- a/arch/arm/mach-pxa/include/mach/littleton.h +++ b/arch/arm/mach-pxa/include/mach/littleton.h @@ -1,13 +1,11 @@ #ifndef __ASM_ARCH_LITTLETON_H #define __ASM_ARCH_LITTLETON_H -#include <mach/gpio-pxa.h> - #define LITTLETON_ETH_PHYS 0x30000000 #define LITTLETON_GPIO_LCD_CS (17) -#define EXT0_GPIO_BASE (NR_BUILTIN_GPIO) +#define EXT0_GPIO_BASE (PXA_NR_BUILTIN_GPIO) #define EXT0_GPIO(x) (EXT0_GPIO_BASE + (x)) #define LITTLETON_NR_IRQS (IRQ_BOARD_START + 8) diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index 7cbfc5d3f9df..ba6a6e1d29e9 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -78,7 +78,7 @@ * CPLD EGPIOs */ -#define MAGICIAN_EGPIO_BASE NR_BUILTIN_GPIO +#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO #define MAGICIAN_EGPIO(reg,bit) \ (MAGICIAN_EGPIO_BASE + 8*reg + bit) diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h index ae536e86d8e8..2c4471336570 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -68,10 +68,10 @@ /* 20, 53 and 86 are usb related too */ /* INTERRUPTS */ -#define IRQ_GPIO_PALMLD_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMLD_GPIO_RESET) -#define IRQ_GPIO_PALMLD_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMLD_SD_DETECT_N) -#define IRQ_GPIO_PALMLD_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMLD_WM9712_IRQ) -#define IRQ_GPIO_PALMLD_IDE_IRQ IRQ_GPIO(GPIO_NR_PALMLD_IDE_IRQ) +#define IRQ_GPIO_PALMLD_GPIO_RESET PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_GPIO_RESET) +#define IRQ_GPIO_PALMLD_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_SD_DETECT_N) +#define IRQ_GPIO_PALMLD_WM9712_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_WM9712_IRQ) +#define IRQ_GPIO_PALMLD_IDE_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_IDE_IRQ) /** HERE ARE INIT VALUES **/ diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index 6baf7469d4ec..0bd4f036c72f 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -48,10 +48,10 @@ #define GPIO_NR_PALMT5_BT_RESET 83 /* INTERRUPTS */ -#define IRQ_GPIO_PALMT5_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMT5_SD_DETECT_N) -#define IRQ_GPIO_PALMT5_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMT5_WM9712_IRQ) -#define IRQ_GPIO_PALMT5_USB_DETECT IRQ_GPIO(GPIO_NR_PALMT5_USB_DETECT) -#define IRQ_GPIO_PALMT5_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMT5_GPIO_RESET) +#define IRQ_GPIO_PALMT5_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_SD_DETECT_N) +#define IRQ_GPIO_PALMT5_WM9712_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_WM9712_IRQ) +#define IRQ_GPIO_PALMT5_USB_DETECT PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_USB_DETECT) +#define IRQ_GPIO_PALMT5_GPIO_RESET PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_GPIO_RESET) /** HERE ARE INIT VALUES **/ diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h index 3f9dd3fd4638..c383a21680b6 100644 --- a/arch/arm/mach-pxa/include/mach/palmtc.h +++ b/arch/arm/mach-pxa/include/mach/palmtc.h @@ -52,8 +52,8 @@ #define GPIO_NR_PALMTC_IR_DISABLE 45 /* IRQs */ -#define IRQ_GPIO_PALMTC_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTC_SD_DETECT_N) -#define IRQ_GPIO_PALMTC_WLAN_READY IRQ_GPIO(GPIO_NR_PALMTC_WLAN_READY) +#define IRQ_GPIO_PALMTC_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_SD_DETECT_N) +#define IRQ_GPIO_PALMTC_WLAN_READY PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_WLAN_READY) /* UCB1400 GPIOs */ #define GPIO_NR_PALMTC_POWER_DETECT (0x80 | 0x00) diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 7074a6ed46c6..f2e530380253 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -62,10 +62,10 @@ #define GPIO_NR_PALMTX_NAND_BUFFER_DIR 79 /* INTERRUPTS */ -#define IRQ_GPIO_PALMTX_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N) -#define IRQ_GPIO_PALMTX_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMTX_WM9712_IRQ) -#define IRQ_GPIO_PALMTX_USB_DETECT IRQ_GPIO(GPIO_NR_PALMTX_USB_DETECT) -#define IRQ_GPIO_PALMTX_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMTX_GPIO_RESET) +#define IRQ_GPIO_PALMTX_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_SD_DETECT_N) +#define IRQ_GPIO_PALMTX_WM9712_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_WM9712_IRQ) +#define IRQ_GPIO_PALMTX_USB_DETECT PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_USB_DETECT) +#define IRQ_GPIO_PALMTX_GPIO_RESET PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_GPIO_RESET) /** HERE ARE INIT VALUES **/ diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h index 4bac588478a8..6bf28de228bd 100644 --- a/arch/arm/mach-pxa/include/mach/pcm027.h +++ b/arch/arm/mach-pxa/include/mach/pcm027.h @@ -34,7 +34,7 @@ /* I2C RTC */ #define PCM027_RTC_IRQ_GPIO 0 -#define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO) +#define PCM027_RTC_IRQ PXA_GPIO_TO_IRQ(PCM027_RTC_IRQ_GPIO) #define PCM027_RTC_IRQ_EDGE IRQ_TYPE_EDGE_FALLING #define ADR_PCM027_RTC 0x51 /* I2C address */ @@ -43,21 +43,21 @@ /* Ethernet chip (SMSC91C111) */ #define PCM027_ETH_IRQ_GPIO 52 -#define PCM027_ETH_IRQ IRQ_GPIO(PCM027_ETH_IRQ_GPIO) +#define PCM027_ETH_IRQ PXA_GPIO_TO_IRQ(PCM027_ETH_IRQ_GPIO) #define PCM027_ETH_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM027_ETH_PHYS PXA_CS5_PHYS #define PCM027_ETH_SIZE (1*1024*1024) /* CAN controller SJA1000 (unsupported yet) */ #define PCM027_CAN_IRQ_GPIO 114 -#define PCM027_CAN_IRQ IRQ_GPIO(PCM027_CAN_IRQ_GPIO) +#define PCM027_CAN_IRQ PXA_GPIO_TO_IRQ(PCM027_CAN_IRQ_GPIO) #define PCM027_CAN_IRQ_EDGE IRQ_TYPE_EDGE_FALLING #define PCM027_CAN_PHYS 0x22000000 #define PCM027_CAN_SIZE 0x100 /* SPI GPIO expander (unsupported yet) */ #define PCM027_EGPIO_IRQ_GPIO 27 -#define PCM027_EGPIO_IRQ IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO) +#define PCM027_EGPIO_IRQ PXA_GPIO_TO_IRQ(PCM027_EGPIO_IRQ_GPIO) #define PCM027_EGPIO_IRQ_EDGE IRQ_TYPE_EDGE_FALLING #define PCM027_EGPIO_CS 24 /* diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h index 8a4383b776d7..d72791695b26 100644 --- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h +++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h @@ -28,14 +28,14 @@ /* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */ #define PCM990_CTRL_INT_IRQ_GPIO 9 -#define PCM990_CTRL_INT_IRQ IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO) +#define PCM990_CTRL_INT_IRQ PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO) #define PCM990_CTRL_INT_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */ #define PCM990_CTRL_BASE 0xea000000 #define PCM990_CTRL_SIZE (1*1024*1024) #define PCM990_CTRL_PWR_IRQ_GPIO 14 -#define PCM990_CTRL_PWR_IRQ IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO) +#define PCM990_CTRL_PWR_IRQ PXA_GPIO_TO_IRQ(PCM990_CTRL_PWR_IRQ_GPIO) #define PCM990_CTRL_PWR_IRQ_EDGE IRQ_TYPE_EDGE_RISING /* visible CPLD (U7) registers */ @@ -132,7 +132,7 @@ * IDE */ #define PCM990_IDE_IRQ_GPIO 13 -#define PCM990_IDE_IRQ IRQ_GPIO(PCM990_IDE_IRQ_GPIO) +#define PCM990_IDE_IRQ PXA_GPIO_TO_IRQ(PCM990_IDE_IRQ_GPIO) #define PCM990_IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */ #define PCM990_IDE_PLD_BASE 0xee000000 @@ -188,11 +188,11 @@ * Compact Flash */ #define PCM990_CF_IRQ_GPIO 11 -#define PCM990_CF_IRQ IRQ_GPIO(PCM990_CF_IRQ_GPIO) +#define PCM990_CF_IRQ PXA_GPIO_TO_IRQ(PCM990_CF_IRQ_GPIO) #define PCM990_CF_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_CF_CD_GPIO 12 -#define PCM990_CF_CD IRQ_GPIO(PCM990_CF_CD_GPIO) +#define PCM990_CF_CD PXA_GPIO_TO_IRQ(PCM990_CF_CD_GPIO) #define PCM990_CF_CD_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */ @@ -258,14 +258,14 @@ * Wolfson AC97 Touch */ #define PCM990_AC97_IRQ_GPIO 10 -#define PCM990_AC97_IRQ IRQ_GPIO(PCM990_AC97_IRQ_GPIO) +#define PCM990_AC97_IRQ PXA_GPIO_TO_IRQ(PCM990_AC97_IRQ_GPIO) #define PCM990_AC97_IRQ_EDGE IRQ_TYPE_EDGE_RISING /* * MMC phyCORE */ #define PCM990_MMC0_IRQ_GPIO 9 -#define PCM990_MMC0_IRQ IRQ_GPIO(PCM990_MMC0_IRQ_GPIO) +#define PCM990_MMC0_IRQ PXA_GPIO_TO_IRQ(PCM990_MMC0_IRQ_GPIO) #define PCM990_MMC0_IRQ_EDGE IRQ_TYPE_EDGE_FALLING /* diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h index 83d1cfd00fc9..f32ff75dcca8 100644 --- a/arch/arm/mach-pxa/include/mach/poodle.h +++ b/arch/arm/mach-pxa/include/mach/poodle.h @@ -47,18 +47,18 @@ #define POODLE_GPIO_DISCHARGE_ON (42) /* Enable battery discharge */ /* PXA GPIOs */ -#define POODLE_IRQ_GPIO_ON_KEY IRQ_GPIO(0) -#define POODLE_IRQ_GPIO_AC_IN IRQ_GPIO(1) -#define POODLE_IRQ_GPIO_HP_IN IRQ_GPIO(4) -#define POODLE_IRQ_GPIO_CO IRQ_GPIO(16) -#define POODLE_IRQ_GPIO_TP_INT IRQ_GPIO(5) -#define POODLE_IRQ_GPIO_WAKEUP IRQ_GPIO(11) -#define POODLE_IRQ_GPIO_GA_INT IRQ_GPIO(10) -#define POODLE_IRQ_GPIO_CF_IRQ IRQ_GPIO(17) -#define POODLE_IRQ_GPIO_CF_CD IRQ_GPIO(14) -#define POODLE_IRQ_GPIO_nSD_INT IRQ_GPIO(8) -#define POODLE_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9) -#define POODLE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(13) +#define POODLE_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(0) +#define POODLE_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(1) +#define POODLE_IRQ_GPIO_HP_IN PXA_GPIO_TO_IRQ(4) +#define POODLE_IRQ_GPIO_CO PXA_GPIO_TO_IRQ(16) +#define POODLE_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(5) +#define POODLE_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(11) +#define POODLE_IRQ_GPIO_GA_INT PXA_GPIO_TO_IRQ(10) +#define POODLE_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(17) +#define POODLE_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(14) +#define POODLE_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(8) +#define POODLE_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(9) +#define POODLE_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(13) /* SCOOP GPIOs */ #define POODLE_SCOOP_CHARGE_ON SCOOP_GPCR_PA11 @@ -71,7 +71,7 @@ #define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT ) #define POODLE_SCOOP_IO_OUT ( 0 ) -#define POODLE_SCOOP_GPIO_BASE (NR_BUILTIN_GPIO) +#define POODLE_SCOOP_GPIO_BASE (PXA_NR_BUILTIN_GPIO) #define POODLE_GPIO_CHARGE_ON (POODLE_SCOOP_GPIO_BASE + 0) #define POODLE_GPIO_CP401 (POODLE_SCOOP_GPIO_BASE + 2) #define POODLE_GPIO_VPEN (POODLE_SCOOP_GPIO_BASE + 7) diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h index 685749a51c42..0bfe6507c95d 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -108,7 +108,7 @@ #define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) #define SPITZ_SCP_SUS_SET 0 -#define SPITZ_SCP_GPIO_BASE (NR_BUILTIN_GPIO) +#define SPITZ_SCP_GPIO_BASE (PXA_NR_BUILTIN_GPIO) #define SPITZ_GPIO_LED_GREEN (SPITZ_SCP_GPIO_BASE + 0) #define SPITZ_GPIO_JK_B (SPITZ_SCP_GPIO_BASE + 1) #define SPITZ_GPIO_CHRG_ON (SPITZ_SCP_GPIO_BASE + 2) @@ -140,7 +140,7 @@ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) #define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1) -#define SPITZ_SCP2_GPIO_BASE (NR_BUILTIN_GPIO + 12) +#define SPITZ_SCP2_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12) #define SPITZ_GPIO_IR_ON (SPITZ_SCP2_GPIO_BASE + 0) #define SPITZ_GPIO_AKIN_PULLUP (SPITZ_SCP2_GPIO_BASE + 1) #define SPITZ_GPIO_RESERVED_1 (SPITZ_SCP2_GPIO_BASE + 2) @@ -152,7 +152,7 @@ #define SPITZ_GPIO_MIC_BIAS (SPITZ_SCP2_GPIO_BASE + 8) /* Akita IO Expander GPIOs */ -#define AKITA_IOEXP_GPIO_BASE (NR_BUILTIN_GPIO + 12) +#define AKITA_IOEXP_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12) #define AKITA_GPIO_RESERVED_0 (AKITA_IOEXP_GPIO_BASE + 0) #define AKITA_GPIO_RESERVED_1 (AKITA_IOEXP_GPIO_BASE + 1) #define AKITA_GPIO_MIC_BIAS (AKITA_IOEXP_GPIO_BASE + 2) @@ -164,23 +164,23 @@ /* Spitz IRQ Definitions */ -#define SPITZ_IRQ_GPIO_KEY_INT IRQ_GPIO(SPITZ_GPIO_KEY_INT) -#define SPITZ_IRQ_GPIO_AC_IN IRQ_GPIO(SPITZ_GPIO_AC_IN) -#define SPITZ_IRQ_GPIO_AK_INT IRQ_GPIO(SPITZ_GPIO_AK_INT) -#define SPITZ_IRQ_GPIO_HP_IN IRQ_GPIO(SPITZ_GPIO_HP_IN) -#define SPITZ_IRQ_GPIO_TP_INT IRQ_GPIO(SPITZ_GPIO_TP_INT) -#define SPITZ_IRQ_GPIO_SYNC IRQ_GPIO(SPITZ_GPIO_SYNC) -#define SPITZ_IRQ_GPIO_ON_KEY IRQ_GPIO(SPITZ_GPIO_ON_KEY) -#define SPITZ_IRQ_GPIO_SWA IRQ_GPIO(SPITZ_GPIO_SWA) -#define SPITZ_IRQ_GPIO_SWB IRQ_GPIO(SPITZ_GPIO_SWB) -#define SPITZ_IRQ_GPIO_BAT_COVER IRQ_GPIO(SPITZ_GPIO_BAT_COVER) -#define SPITZ_IRQ_GPIO_FATAL_BAT IRQ_GPIO(SPITZ_GPIO_FATAL_BAT) -#define SPITZ_IRQ_GPIO_CO IRQ_GPIO(SPITZ_GPIO_CO) -#define SPITZ_IRQ_GPIO_CF_IRQ IRQ_GPIO(SPITZ_GPIO_CF_IRQ) -#define SPITZ_IRQ_GPIO_CF_CD IRQ_GPIO(SPITZ_GPIO_CF_CD) -#define SPITZ_IRQ_GPIO_CF2_IRQ IRQ_GPIO(SPITZ_GPIO_CF2_IRQ) -#define SPITZ_IRQ_GPIO_nSD_INT IRQ_GPIO(SPITZ_GPIO_nSD_INT) -#define SPITZ_IRQ_GPIO_nSD_DETECT IRQ_GPIO(SPITZ_GPIO_nSD_DETECT) +#define SPITZ_IRQ_GPIO_KEY_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_KEY_INT) +#define SPITZ_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(SPITZ_GPIO_AC_IN) +#define SPITZ_IRQ_GPIO_AK_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_AK_INT) +#define SPITZ_IRQ_GPIO_HP_IN PXA_GPIO_TO_IRQ(SPITZ_GPIO_HP_IN) +#define SPITZ_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT) +#define SPITZ_IRQ_GPIO_SYNC PXA_GPIO_TO_IRQ(SPITZ_GPIO_SYNC) +#define SPITZ_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(SPITZ_GPIO_ON_KEY) +#define SPITZ_IRQ_GPIO_SWA PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWA) +#define SPITZ_IRQ_GPIO_SWB PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWB) +#define SPITZ_IRQ_GPIO_BAT_COVER PXA_GPIO_TO_IRQ(SPITZ_GPIO_BAT_COVER) +#define SPITZ_IRQ_GPIO_FATAL_BAT PXA_GPIO_TO_IRQ(SPITZ_GPIO_FATAL_BAT) +#define SPITZ_IRQ_GPIO_CO PXA_GPIO_TO_IRQ(SPITZ_GPIO_CO) +#define SPITZ_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_IRQ) +#define SPITZ_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_CD) +#define SPITZ_IRQ_GPIO_CF2_IRQ PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF2_IRQ) +#define SPITZ_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_INT) +#define SPITZ_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_DETECT) /* * Shared data structures diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h index d1fce8b6d105..c5afacd3cc0b 100644 --- a/arch/arm/mach-pxa/include/mach/system.h +++ b/arch/arm/mach-pxa/include/mach/system.h @@ -9,15 +9,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - -#include <asm/proc-fns.h> -#include "hardware.h" -#include "pxa2xx-regs.h" - static inline void arch_idle(void) { cpu_do_idle(); } - - -void arch_reset(char mode, const char *cmd); diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h index 1272c4b56ceb..2bb0e862598c 100644 --- a/arch/arm/mach-pxa/include/mach/tosa.h +++ b/arch/arm/mach-pxa/include/mach/tosa.h @@ -24,7 +24,7 @@ /* * SCOOP2 internal GPIOs */ -#define TOSA_SCOOP_GPIO_BASE NR_BUILTIN_GPIO +#define TOSA_SCOOP_GPIO_BASE PXA_NR_BUILTIN_GPIO #define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11 #define TOSA_GPIO_TC6393XB_REST_IN (TOSA_SCOOP_GPIO_BASE + 1) #define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2) @@ -42,7 +42,7 @@ /* * SCOOP2 jacket GPIOs */ -#define TOSA_SCOOP_JC_GPIO_BASE (NR_BUILTIN_GPIO + 12) +#define TOSA_SCOOP_JC_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12) #define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0) #define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1) #define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2) @@ -59,7 +59,7 @@ /* * TC6393XB GPIOs */ -#define TOSA_TC6393XB_GPIO_BASE (NR_BUILTIN_GPIO + 2 * 12) +#define TOSA_TC6393XB_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 2 * 12) #define TOSA_GPIO_TG_ON (TOSA_TC6393XB_GPIO_BASE + 0) #define TOSA_GPIO_L_MUTE (TOSA_TC6393XB_GPIO_BASE + 1) @@ -141,30 +141,30 @@ /* * Interrupts */ -#define TOSA_IRQ_GPIO_WAKEUP IRQ_GPIO(TOSA_GPIO_WAKEUP) -#define TOSA_IRQ_GPIO_AC_IN IRQ_GPIO(TOSA_GPIO_AC_IN) -#define TOSA_IRQ_GPIO_RECORD_BTN IRQ_GPIO(TOSA_GPIO_RECORD_BTN) -#define TOSA_IRQ_GPIO_SYNC IRQ_GPIO(TOSA_GPIO_SYNC) -#define TOSA_IRQ_GPIO_USB_IN IRQ_GPIO(TOSA_GPIO_USB_IN) -#define TOSA_IRQ_GPIO_JACKET_DETECT IRQ_GPIO(TOSA_GPIO_JACKET_DETECT) -#define TOSA_IRQ_GPIO_nSD_INT IRQ_GPIO(TOSA_GPIO_nSD_INT) -#define TOSA_IRQ_GPIO_nSD_DETECT IRQ_GPIO(TOSA_GPIO_nSD_DETECT) -#define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG) -#define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD) -#define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG) -#define TOSA_IRQ_GPIO_TC6393XB_INT IRQ_GPIO(TOSA_GPIO_TC6393XB_INT) -#define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW) -#define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN) -#define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ) -#define TOSA_IRQ_GPIO_ON_KEY IRQ_GPIO(TOSA_GPIO_ON_KEY) -#define TOSA_IRQ_GPIO_VGA_LINE IRQ_GPIO(TOSA_GPIO_VGA_LINE) -#define TOSA_IRQ_GPIO_TP_INT IRQ_GPIO(TOSA_GPIO_TP_INT) -#define TOSA_IRQ_GPIO_JC_CF_IRQ IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ) -#define TOSA_IRQ_GPIO_BAT_LOCKED IRQ_GPIO(TOSA_GPIO_BAT_LOCKED) -#define TOSA_IRQ_GPIO_BAT1_LOW IRQ_GPIO(TOSA_GPIO_BAT1_LOW) -#define TOSA_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(69+(a)) - -#define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW) +#define TOSA_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(TOSA_GPIO_WAKEUP) +#define TOSA_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN) +#define TOSA_IRQ_GPIO_RECORD_BTN PXA_GPIO_TO_IRQ(TOSA_GPIO_RECORD_BTN) +#define TOSA_IRQ_GPIO_SYNC PXA_GPIO_TO_IRQ(TOSA_GPIO_SYNC) +#define TOSA_IRQ_GPIO_USB_IN PXA_GPIO_TO_IRQ(TOSA_GPIO_USB_IN) +#define TOSA_IRQ_GPIO_JACKET_DETECT PXA_GPIO_TO_IRQ(TOSA_GPIO_JACKET_DETECT) +#define TOSA_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_INT) +#define TOSA_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_DETECT) +#define TOSA_IRQ_GPIO_BAT1_CRG PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_CRG) +#define TOSA_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_CD) +#define TOSA_IRQ_GPIO_BAT0_CRG PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_CRG) +#define TOSA_IRQ_GPIO_TC6393XB_INT PXA_GPIO_TO_IRQ(TOSA_GPIO_TC6393XB_INT) +#define TOSA_IRQ_GPIO_BAT0_LOW PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_LOW) +#define TOSA_IRQ_GPIO_EAR_IN PXA_GPIO_TO_IRQ(TOSA_GPIO_EAR_IN) +#define TOSA_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_IRQ) +#define TOSA_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(TOSA_GPIO_ON_KEY) +#define TOSA_IRQ_GPIO_VGA_LINE PXA_GPIO_TO_IRQ(TOSA_GPIO_VGA_LINE) +#define TOSA_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(TOSA_GPIO_TP_INT) +#define TOSA_IRQ_GPIO_JC_CF_IRQ PXA_GPIO_TO_IRQ(TOSA_GPIO_JC_CF_IRQ) +#define TOSA_IRQ_GPIO_BAT_LOCKED PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT_LOCKED) +#define TOSA_IRQ_GPIO_BAT1_LOW PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_LOW) +#define TOSA_IRQ_GPIO_KEY_SENSE(a) PXA_GPIO_TO_IRQ(69+(a)) + +#define TOSA_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(TOSA_GPIO_MAIN_BAT_LOW) #define TOSA_KEY_SYNC KEY_102ND /* ??? */ diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h index 903e1a2e6641..d2ca01053f69 100644 --- a/arch/arm/mach-pxa/include/mach/trizeps4.h +++ b/arch/arm/mach-pxa/include/mach/trizeps4.h @@ -43,30 +43,30 @@ /* Ethernet Controller Davicom DM9000 */ #define GPIO_DM9000 101 -#define TRIZEPS4_ETH_IRQ IRQ_GPIO(GPIO_DM9000) +#define TRIZEPS4_ETH_IRQ PXA_GPIO_TO_IRQ(GPIO_DM9000) /* UCB1400 audio / TS-controller */ #define GPIO_UCB1400 1 -#define TRIZEPS4_UCB1400_IRQ IRQ_GPIO(GPIO_UCB1400) +#define TRIZEPS4_UCB1400_IRQ PXA_GPIO_TO_IRQ(GPIO_UCB1400) /* PCMCIA socket Compact Flash */ #define GPIO_PCD 11 /* PCMCIA Card Detect */ -#define TRIZEPS4_CD_IRQ IRQ_GPIO(GPIO_PCD) +#define TRIZEPS4_CD_IRQ PXA_GPIO_TO_IRQ(GPIO_PCD) #define GPIO_PRDY 13 /* READY / nINT */ -#define TRIZEPS4_READY_NINT IRQ_GPIO(GPIO_PRDY) +#define TRIZEPS4_READY_NINT PXA_GPIO_TO_IRQ(GPIO_PRDY) /* MMC socket */ #define GPIO_MMC_DET 12 -#define TRIZEPS4_MMC_IRQ IRQ_GPIO(GPIO_MMC_DET) +#define TRIZEPS4_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO_MMC_DET) /* DOC NAND chip */ #define GPIO_DOC_LOCK 94 #define GPIO_DOC_IRQ 93 -#define TRIZEPS4_DOC_IRQ IRQ_GPIO(GPIO_DOC_IRQ) +#define TRIZEPS4_DOC_IRQ PXA_GPIO_TO_IRQ(GPIO_DOC_IRQ) /* SPI interface */ #define GPIO_SPI 53 -#define TRIZEPS4_SPI_IRQ IRQ_GPIO(GPIO_SPI) +#define TRIZEPS4_SPI_IRQ PXA_GPIO_TO_IRQ(GPIO_SPI) /* LEDS using tx2 / rx2 */ #define GPIO_SYS_BUSY_LED 46 @@ -74,7 +74,7 @@ /* Off-module PIC on ConXS board */ #define GPIO_PIC 0 -#define TRIZEPS4_PIC_IRQ IRQ_GPIO(GPIO_PIC) +#define TRIZEPS4_PIC_IRQ PXA_GPIO_TO_IRQ(GPIO_PIC) #ifdef CONFIG_MACH_TRIZEPS_CONXS /* for CONXS base board define these registers */ diff --git a/arch/arm/mach-pxa/include/mach/vmalloc.h b/arch/arm/mach-pxa/include/mach/vmalloc.h deleted file mode 100644 index bfecfbf5f460..000000000000 --- a/arch/arm/mach-pxa/include/mach/vmalloc.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * arch/arm/mach-pxa/include/mach/vmalloc.h - * - * Author: Nicolas Pitre - * Copyright: (C) 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define VMALLOC_END (0xe8000000UL) diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 532c5d3a97d2..5dae15ea6718 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -22,7 +22,6 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/gpio-pxa.h> #include "generic.h" @@ -92,44 +91,6 @@ static struct irq_chip pxa_internal_irq_chip = { .irq_unmask = pxa_unmask_irq, }; -/* - * GPIO IRQs for GPIO 0 and 1 - */ -static int pxa_set_low_gpio_type(struct irq_data *d, unsigned int type) -{ - int gpio = d->irq - IRQ_GPIO0; - - if (__gpio_is_occupied(gpio)) { - pr_err("%s failed: GPIO is configured\n", __func__); - return -EINVAL; - } - - if (type & IRQ_TYPE_EDGE_RISING) - GRER0 |= GPIO_bit(gpio); - else - GRER0 &= ~GPIO_bit(gpio); - - if (type & IRQ_TYPE_EDGE_FALLING) - GFER0 |= GPIO_bit(gpio); - else - GFER0 &= ~GPIO_bit(gpio); - - return 0; -} - -static void pxa_ack_low_gpio(struct irq_data *d) -{ - GEDR0 = (1 << (d->irq - IRQ_GPIO0)); -} - -static struct irq_chip pxa_low_gpio_chip = { - .name = "GPIO-l", - .irq_ack = pxa_ack_low_gpio, - .irq_mask = pxa_mask_irq, - .irq_unmask = pxa_unmask_irq, - .irq_set_type = pxa_set_low_gpio_type, -}; - asmlinkage void __exception_irq_entry icip_handle_irq(struct pt_regs *regs) { uint32_t icip, icmr, mask; @@ -160,26 +121,7 @@ asmlinkage void __exception_irq_entry ichp_handle_irq(struct pt_regs *regs) } while (1); } -static void __init pxa_init_low_gpio_irq(set_wake_t fn) -{ - int irq; - - /* clear edge detection on GPIO 0 and 1 */ - GFER0 &= ~0x3; - GRER0 &= ~0x3; - GEDR0 = 0x3; - - for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) { - irq_set_chip_and_handler(irq, &pxa_low_gpio_chip, - handle_edge_irq); - irq_set_chip_data(irq, irq_base(0)); - set_irq_flags(irq, IRQF_VALID); - } - - pxa_low_gpio_chip.irq_set_wake = fn; -} - -void __init pxa_init_irq(int irq_nr, set_wake_t fn) +void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int)) { int irq, i, n; @@ -209,7 +151,6 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) __raw_writel(1, irq_base(0) + ICCR); pxa_internal_irq_chip.irq_set_wake = fn; - pxa_init_low_gpio_irq(fn); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 7b324ec6449f..1fb86edb857c 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -124,8 +124,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)), - .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)), + .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)), + .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, } }; @@ -396,7 +396,7 @@ static struct i2c_board_info littleton_i2c_info[] = { .type = "da9034", .addr = 0x34, .platform_data = &littleton_da9034_info, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO18)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO18)), }, [1] = { .type = "max7320", @@ -445,4 +445,5 @@ MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleto .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = littleton_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 1dd530279e0b..cee9ce2fc0b5 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -152,8 +152,8 @@ static void __init lpd270_init_irq(void) handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - irq_set_chained_handler(IRQ_GPIO(0), lpd270_irq_handler); - irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); + irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler); + irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING); } @@ -505,4 +505,5 @@ MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = lpd270_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index c48ce6da9184..6ebd276aebeb 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -170,8 +170,8 @@ static void __init lubbock_init_irq(void) set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - irq_set_chained_handler(IRQ_GPIO(0), lubbock_irq_handler); - irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); + irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler); + irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING); } #ifdef CONFIG_PM @@ -556,4 +556,5 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)") .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = lubbock_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 4b796c37af3e..3d6baf91396c 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -184,8 +184,8 @@ static struct resource egpio_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ), - .end = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), .flags = IORESOURCE_IRQ, }, }; @@ -468,8 +468,8 @@ static struct resource pasic3_resources[] = { }, /* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */ [1] = { - .start = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ), - .end = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -760,4 +760,5 @@ MACHINE_START(MAGICIAN, "HTC Magician") .handle_irq = pxa27x_handle_irq, .init_machine = magician_init, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 0567d3965fda..1aebaf719462 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -178,8 +178,8 @@ static void __init mainstone_init_irq(void) MST_INTMSKENA = 0; MST_INTSETCLR = 0; - irq_set_chained_handler(IRQ_GPIO(0), mainstone_irq_handler); - irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); + irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler); + irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING); } #ifdef CONFIG_PM @@ -622,4 +622,5 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = mainstone_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 43a5f6861ca3..f14775536b83 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -13,6 +13,7 @@ * published by the Free Software Foundation. */ #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -20,7 +21,6 @@ #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa2xx.h> -#include <mach/gpio-pxa.h> #include "generic.h" @@ -29,6 +29,10 @@ #define GAFR_L(x) __GAFR(0, x) #define GAFR_U(x) __GAFR(1, x) +#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) +#define GPLR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5)) +#define GPDR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c) + #define PWER_WE35 (1 << 24) struct gpio_desc { diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index b938fc2c316a..e80a3db735c2 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -53,6 +53,7 @@ #include <mach/pxa27x-udc.h> #include <mach/camera.h> #include <mach/audio.h> +#include <mach/smemc.h> #include <media/soc_camera.h> #include <mach/mioa701.h> @@ -390,24 +391,19 @@ static struct pxamci_platform_data mioa701_mci_info = { }; /* FlashRAM */ -static struct resource strataflash_resource = { +static struct resource docg3_resource = { .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + SZ_64M - 1, + .end = PXA_CS0_PHYS + SZ_8K - 1, .flags = IORESOURCE_MEM, }; -static struct physmap_flash_data strataflash_data = { - .width = 2, - /* .set_vpp = mioa701_set_vpp, */ -}; - -static struct platform_device strataflash = { - .name = "physmap-flash", +static struct platform_device docg3 = { + .name = "docg3", .id = -1, - .resource = &strataflash_resource, + .resource = &docg3_resource, .num_resources = 1, .dev = { - .platform_data = &strataflash_data, + .platform_data = NULL, }, }; @@ -541,15 +537,15 @@ static struct pda_power_pdata power_pdata = { static struct resource power_resources[] = { [0] = { .name = "ac", - .start = gpio_to_irq(GPIO96_AC_DETECT), - .end = gpio_to_irq(GPIO96_AC_DETECT), + .start = PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT), + .end = PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, }, [1] = { .name = "usb", - .start = gpio_to_irq(GPIO13_nUSB_DETECT), - .end = gpio_to_irq(GPIO13_nUSB_DETECT), + .start = PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT), + .end = PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, }, @@ -685,7 +681,7 @@ static struct platform_device *devices[] __initdata = { &pxa2xx_pcm, &mioa701_sound, &power_dev, - &strataflash, + &docg3, &gpio_vbus, &mioa701_camera, &mioa701_board, @@ -696,13 +692,13 @@ static void mioa701_machine_exit(void); static void mioa701_poweroff(void) { mioa701_machine_exit(); - arm_machine_restart('s', NULL); + pxa_restart('s', NULL); } static void mioa701_restart(char c, const char *cmd) { mioa701_machine_exit(); - arm_machine_restart('s', cmd); + pxa_restart('s', cmd); } static struct gpio global_gpios[] = { @@ -720,6 +716,15 @@ static void __init mioa701_machine_init(void) RTTR = 32768 - 1; /* Reset crazy WinCE value */ UP2OCR = UP2OCR_HXOE; + /* + * Set up the flash memory : DiskOnChip G3 on first static memory bank + */ + __raw_writel(0x7ff02dd8, MSC0); + __raw_writel(0x0001c391, MCMEM0); + __raw_writel(0x0001c391, MCATT0); + __raw_writel(0x0001c391, MCIO0); + + pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config)); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); @@ -734,7 +739,6 @@ static void __init mioa701_machine_init(void) pxa_set_udc_info(&mioa701_udc_info); pxa_set_ac97_info(&mioa701_ac97_info); pm_power_off = mioa701_poweroff; - arm_pm_restart = mioa701_restart; platform_add_devices(devices, ARRAY_SIZE(devices)); gsm_init(); @@ -752,9 +756,11 @@ static void mioa701_machine_exit(void) MACHINE_START(MIOA701, "MIO A701") .atag_offset = 0x100, + .restart_mode = 's', .map_io = &pxa27x_map_io, .init_irq = &pxa27x_init_irq, .handle_irq = &pxa27x_handle_irq, .init_machine = mioa701_machine_init, .timer = &pxa_timer, + .restart = mioa701_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c index 4af5d513c380..169bf8f97af0 100644 --- a/arch/arm/mach-pxa/mp900.c +++ b/arch/arm/mach-pxa/mp900.c @@ -98,5 +98,6 @@ MACHINE_START(NEC_MP900, "MobilePro900/C") .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_machine = mp900c_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index 90928d6e1a5b..83570a79e7d2 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -417,8 +417,8 @@ static struct resource dm9k_resources[] = { .flags = IORESOURCE_MEM }, [2] = { - .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)), - .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)), + .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)), + .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE } }; diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 3d4a2819cae1..1fa80f4f80c8 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -347,5 +347,6 @@ MACHINE_START(PALMLD, "Palm LifeDrive") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, - .init_machine = palmld_init + .init_machine = palmld_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 99d6bcf1f974..5ba14316bd9c 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -208,5 +208,6 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, - .init_machine = palmt5_init + .init_machine = palmt5_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 2c24c67fd92b..29b51b40f09d 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -542,5 +542,6 @@ MACHINE_START(PALMTC, "Palm Tungsten|C") .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, - .init_machine = palmtc_init + .init_machine = palmtc_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 9376da06404c..5ebf49acb827 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -361,5 +361,6 @@ MACHINE_START(PALMTE2, "Palm Tungsten|E2") .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, - .init_machine = palmte2_init + .init_machine = palmte2_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 94e9708b349d..ec8249156c08 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -452,6 +452,7 @@ MACHINE_START(TREO680, "Palm Treo 680") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = treo680_init, + .restart = pxa_restart, MACHINE_END #endif @@ -464,5 +465,6 @@ MACHINE_START(CENTRO, "Palm Centro 685") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = centro_init, + .restart = pxa_restart, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 4e3e45927e95..6170d76dfba8 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -369,5 +369,6 @@ MACHINE_START(PALMTX, "Palm T|X") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, - .init_machine = palmtx_init + .init_machine = palmtx_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 68e18baf8e07..b2dff9d415eb 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -404,5 +404,6 @@ MACHINE_START(PALMZ72, "Palm Zire72") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, - .init_machine = palmz72_init + .init_machine = palmz72_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index 0b825a353537..fe9054435b6f 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -265,4 +265,5 @@ MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = pcm027_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 6d38c6548b3d..abab4e2b122c 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -378,7 +378,7 @@ struct pxacamera_platform_data pcm990_pxacamera_platform_data = { #include <linux/i2c/pca953x.h> static struct pca953x_platform_data pca9536_data = { - .gpio_base = NR_BUILTIN_GPIO, + .gpio_base = PXA_NR_BUILTIN_GPIO, }; static int gpio_bus_switch = -EINVAL; @@ -406,9 +406,9 @@ static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link) int ret; if (gpio_bus_switch < 0) { - ret = gpio_request(NR_BUILTIN_GPIO, "camera"); + ret = gpio_request(PXA_NR_BUILTIN_GPIO, "camera"); if (!ret) { - gpio_bus_switch = NR_BUILTIN_GPIO; + gpio_bus_switch = PXA_NR_BUILTIN_GPIO; gpio_direction_output(gpio_bus_switch, 0); } } diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 50c833177866..69036e42ca31 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -166,8 +166,8 @@ static struct resource locomo_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_GPIO(10), - .end = IRQ_GPIO(10), + .start = PXA_GPIO_TO_IRQ(10), + .end = PXA_GPIO_TO_IRQ(10), .flags = IORESOURCE_IRQ, }, }; @@ -212,7 +212,7 @@ static struct spi_board_info poodle_spi_devices[] = { .bus_num = 1, .platform_data = &poodle_ads7846_info, .controller_data= &poodle_ads7846_chip, - .irq = gpio_to_irq(POODLE_GPIO_TP_INT), + .irq = PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT), }, }; @@ -417,12 +417,7 @@ static struct i2c_board_info __initdata poodle_i2c_devices[] = { static void poodle_poweroff(void) { - arm_machine_restart('h', NULL); -} - -static void poodle_restart(char mode, const char *cmd) -{ - arm_machine_restart('h', cmd); + pxa_restart('h', NULL); } static void __init poodle_init(void) @@ -430,7 +425,6 @@ static void __init poodle_init(void) int ret = 0; pm_power_off = poodle_poweroff; - arm_pm_restart = poodle_restart; PCFR |= PCFR_OPDE; @@ -472,4 +466,5 @@ MACHINE_START(POODLE, "SHARP Poodle") .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = poodle_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index f05f9486b0cb..adf058fa97ee 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -17,6 +17,7 @@ * need be. */ #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -208,6 +209,8 @@ static struct clk_lookup pxa25x_clkregs[] = { INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"), INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), + INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static struct clk_lookup pxa25x_hwuart_clkreg = @@ -287,7 +290,7 @@ static inline void pxa25x_init_pm(void) {} static int pxa25x_set_wake(struct irq_data *d, unsigned int on) { - int gpio = irq_to_gpio(d->irq); + int gpio = pxa_irq_to_gpio(d->irq); uint32_t mask = 0; if (gpio >= 0 && gpio < 85) @@ -312,14 +315,12 @@ set_pwer: void __init pxa25x_init_irq(void) { pxa_init_irq(32, pxa25x_set_wake); - pxa_init_gpio(IRQ_GPIO_2_x, 2, 84, pxa25x_set_wake); } #ifdef CONFIG_CPU_PXA26x void __init pxa26x_init_irq(void) { pxa_init_irq(32, pxa25x_set_wake); - pxa_init_gpio(IRQ_GPIO_2_x, 2, 89, pxa25x_set_wake); } #endif diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index bc5a98ebaa72..180bd8675d4b 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -12,6 +12,7 @@ * published by the Free Software Foundation. */ #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -229,6 +230,8 @@ static struct clk_lookup pxa27x_clkregs[] = { INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"), INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), + INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; #ifdef CONFIG_PM @@ -355,7 +358,7 @@ static inline void pxa27x_init_pm(void) {} */ static int pxa27x_set_wake(struct irq_data *d, unsigned int on) { - int gpio = irq_to_gpio(d->irq); + int gpio = pxa_irq_to_gpio(d->irq); uint32_t mask; if (gpio >= 0 && gpio < 128) @@ -386,7 +389,6 @@ static int pxa27x_set_wake(struct irq_data *d, unsigned int on) void __init pxa27x_init_irq(void) { pxa_init_irq(34, pxa27x_set_wake); - pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake); } static struct map_desc pxa27x_io_desc[] __initdata = { @@ -422,6 +424,7 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) } static struct platform_device *devices[] __initdata = { + &pxa_device_gpio, &pxa27x_device_udc, &pxa_device_pmu, &pxa_device_i2s, diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index 40bb16501d86..0388eda7878a 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -89,6 +89,7 @@ static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0); static struct clk_lookup common_clkregs[] = { INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0); diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index 8d614ecd8e99..d487e1ff4c9a 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -83,6 +83,7 @@ static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0); static struct clk_lookup pxa320_clkregs[] = { INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static int __init pxa320_init(void) diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 0737c59b88ae..f107c71c7589 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -25,7 +25,6 @@ #include <asm/mach/map.h> #include <asm/suspend.h> #include <mach/hardware.h> -#include <mach/gpio-pxa.h> #include <mach/pxa3xx-regs.h> #include <mach/reset.h> #include <mach/ohci.h> @@ -56,6 +55,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_pwm0, PWM0, 13000000, 0); static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0); static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0); static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0); +static DEFINE_PXA3_CKEN(pxa3xx_gpio, GPIO, 13000000, 0); static DEFINE_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops); static DEFINE_CK(pxa3xx_smemc, SMC, &clk_pxa3xx_smemc_ops); @@ -67,6 +67,7 @@ static struct clk_lookup pxa3xx_clkregs[] = { INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"), /* Power I2C clock is always on */ INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL), INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"), INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"), @@ -88,6 +89,7 @@ static struct clk_lookup pxa3xx_clkregs[] = { INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL), INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL), INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL), + INIT_CLKREG(&clk_pxa3xx_gpio, "pxa-gpio", NULL), }; #ifdef CONFIG_PM @@ -365,7 +367,8 @@ static struct irq_chip pxa_ext_wakeup_chip = { .irq_set_type = pxa_set_ext_wakeup_type, }; -static void __init pxa_init_ext_wakeup_irq(set_wake_t fn) +static void __init pxa_init_ext_wakeup_irq(int (*fn)(struct irq_data *, + unsigned int)) { int irq; @@ -388,7 +391,6 @@ void __init pxa3xx_init_irq(void) pxa_init_irq(56, pxa3xx_set_wake); pxa_init_ext_wakeup_irq(pxa3xx_set_wake); - pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL); } static struct map_desc pxa3xx_io_desc[] __initdata = { @@ -417,6 +419,7 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info) } static struct platform_device *devices[] __initdata = { + &pxa_device_gpio, &pxa27x_device_udc, &pxa_device_pmu, &pxa_device_i2s, diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index 51371b39d2a3..fccc644702e6 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -20,7 +20,6 @@ #include <linux/syscore_ops.h> #include <mach/hardware.h> -#include <mach/gpio-pxa.h> #include <mach/pxa3xx-regs.h> #include <mach/pxa930.h> #include <mach/reset.h> @@ -212,11 +211,13 @@ static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0); static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0); static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0); static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0); +static DEFINE_PXA3_CKEN(pxa95x_gpio, GPIO, 13000000, 0); static struct clk_lookup pxa95x_clkregs[] = { INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"), /* Power I2C clock is always on */ INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL), INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL), INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL), @@ -230,12 +231,12 @@ static struct clk_lookup pxa95x_clkregs[] = { INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL), INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL), INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL), + INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL), }; void __init pxa95x_init_irq(void) { pxa_init_irq(96, NULL); - pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL); } /* @@ -248,6 +249,7 @@ void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info) } static struct platform_device *devices[] __initdata = { + &pxa_device_gpio, &sa1100_device_rtc, &pxa_device_rtc, &pxa27x_device_ssp1, diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index f0c05f4d12ed..22818c7694a8 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -292,8 +292,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = gpio_to_irq(GPIO_ETH_IRQ), - .end = gpio_to_irq(GPIO_ETH_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; @@ -672,7 +672,7 @@ static struct lis3lv02d_platform_data lis3_pdata = { .chip_select = 1, \ .controller_data = (void *) GPIO_ACCEL_CS, \ .platform_data = &lis3_pdata, \ - .irq = gpio_to_irq(GPIO_ACCEL_IRQ), \ + .irq = PXA_GPIO_TO_IRQ(GPIO_ACCEL_IRQ), \ } #define SPI_DAC7512 \ @@ -956,7 +956,7 @@ static struct eeti_ts_platform_data eeti_ts_pdata = { static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = { .type = "eeti_ts", .addr = 0x0a, - .irq = gpio_to_irq(GPIO_TOUCH_IRQ), + .irq = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ), .platform_data = &eeti_ts_pdata, }; @@ -1093,6 +1093,7 @@ MACHINE_START(RAUMFELD_RC, "Raumfeld Controller") .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END #endif @@ -1104,6 +1105,7 @@ MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector") .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END #endif @@ -1115,5 +1117,6 @@ MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker") .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index 01e9d643394a..c8497b00cdfe 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -81,14 +81,17 @@ static void do_hw_reset(void) OSMR3 = OSCR + 368640; /* ... in 100 ms */ } -void arch_reset(char mode, const char *cmd) +void pxa_restart(char mode, const char *cmd) { + local_irq_disable(); + local_fiq_disable(); + clear_reset_status(RESET_STATUS_ALL); switch (mode) { case 's': /* Jump into ROM at address 0 */ - cpu_reset(0); + soft_restart(0); break; case 'g': do_gpio_reset(); diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index fc2c1e05af9c..0fe354efb931 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -96,8 +96,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)), - .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)), + .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)), + .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -502,7 +502,7 @@ static struct i2c_board_info saar_i2c_info[] = { .type = "da9034", .addr = 0x34, .platform_data = &saar_da9034_info, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)), }, }; @@ -602,4 +602,5 @@ MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)") .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = saar_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index 3e999e308a2d..febc809ed5a6 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -92,7 +92,7 @@ static struct i2c_board_info saarb_i2c_info[] = { .type = "88PM860x", .addr = 0x34, .platform_data = &saarb_pm8607_info, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)), }, }; @@ -111,5 +111,6 @@ MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)") .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = saarb_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 785880f67b60..8d5168d253a9 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -907,24 +907,24 @@ static int __devinit sharpsl_pm_probe(struct platform_device *pdev) gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock); /* Register interrupt handlers */ - if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) { - dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin)); + if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin)); } - if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) { - dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock)); + if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock)); } if (sharpsl_pm.machinfo->gpio_fatal) { - if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) { - dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal)); + if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal)); } } if (sharpsl_pm.machinfo->batfull_irq) { /* Register interrupt handler. */ - if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) { - dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull)); + if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull)); } } @@ -953,14 +953,14 @@ static int sharpsl_pm_remove(struct platform_device *pdev) led_trigger_unregister_simple(sharpsl_charge_led_trigger); - free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr); - free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr); + free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr); + free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr); if (sharpsl_pm.machinfo->gpio_fatal) - free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr); + free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr); if (sharpsl_pm.machinfo->batfull_irq) - free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr); + free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr); gpio_free(sharpsl_pm.machinfo->gpio_batlock); gpio_free(sharpsl_pm.machinfo->gpio_batfull); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 953a9195f9e5..abf355d0c92f 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -552,7 +552,7 @@ static struct spi_board_info spitz_spi_devices[] = { .chip_select = 0, .platform_data = &spitz_ads7846_info, .controller_data = &spitz_ads7846_chip, - .irq = gpio_to_irq(SPITZ_GPIO_TP_INT), + .irq = PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT), }, { .modalias = "corgi-lcd", .max_speed_hz = 50000, @@ -926,7 +926,7 @@ static inline void spitz_i2c_init(void) {} ******************************************************************************/ static void spitz_poweroff(void) { - arm_machine_restart('g', NULL); + pxa_restart('g', NULL); } static void spitz_restart(char mode, const char *cmd) @@ -943,7 +943,6 @@ static void __init spitz_init(void) { init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0); pm_power_off = spitz_poweroff; - arm_pm_restart = spitz_restart; PMCR = 0x00; @@ -982,33 +981,39 @@ static void __init spitz_fixup(struct tag *tags, char **cmdline, #ifdef CONFIG_MACH_SPITZ MACHINE_START(SPITZ, "SHARP Spitz") + .restart_mode = 'g', .fixup = spitz_fixup, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, .timer = &pxa_timer, + .restart = spitz_restart, MACHINE_END #endif #ifdef CONFIG_MACH_BORZOI MACHINE_START(BORZOI, "SHARP Borzoi") + .restart_mode = 'g', .fixup = spitz_fixup, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, .timer = &pxa_timer, + .restart = spitz_restart, MACHINE_END #endif #ifdef CONFIG_MACH_AKITA MACHINE_START(AKITA, "SHARP Akita") + .restart_mode = 'g', .fixup = spitz_fixup, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, .timer = &pxa_timer, + .restart = spitz_restart, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 094279aefe9c..34cbdac51525 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/apm-emulation.h> @@ -41,6 +42,7 @@ static int spitz_last_ac_status; static struct gpio spitz_charger_gpios[] = { { SPITZ_GPIO_KEY_INT, GPIOF_IN, "Keyboard Interrupt" }, { SPITZ_GPIO_SYNC, GPIOF_IN, "Sync" }, + { SPITZ_GPIO_AC_IN, GPIOF_IN, "Charger Detection" }, { SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" }, { SPITZ_GPIO_JK_B, GPIOF_OUT_INIT_LOW, "JK B" }, { SPITZ_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" }, @@ -169,14 +171,19 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm) static unsigned long spitz_charger_wakeup(void) { - return (~GPLR0 & GPIO_bit(SPITZ_GPIO_KEY_INT)) | (GPLR0 & GPIO_bit(SPITZ_GPIO_SYNC)); + unsigned long ret; + ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT) + << GPIO_bit(SPITZ_GPIO_KEY_INT)) + | (!gpio_get_value(SPITZ_GPIO_SYNC) + << GPIO_bit(SPITZ_GPIO_SYNC)); + return ret; } unsigned long spitzpm_read_devdata(int type) { switch (type) { case SHARPSL_STATUS_ACIN: - return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0); + return !gpio_get_value(SPITZ_GPIO_AC_IN); case SHARPSL_STATUS_LOCK: return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock); case SHARPSL_STATUS_CHRGFULL: diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 4c9a48bef569..d8a2467de92e 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -376,7 +376,7 @@ static struct spi_board_info spi_board_info[] __initdata = { .bus_num = 1, .chip_select = 0, .controller_data = &staccel_chip_info, - .irq = IRQ_GPIO(96), + .irq = PXA_GPIO_TO_IRQ(96), }, { .modalias = "cc2420", .max_speed_hz = 6500000, @@ -546,7 +546,7 @@ static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = { .type = "da9030", .addr = 0x49, .platform_data = &imote2_da9030_pdata, - .irq = gpio_to_irq(1), + .irq = PXA_GPIO_TO_IRQ(1), }, }; @@ -560,18 +560,18 @@ static struct i2c_board_info __initdata imote2_i2c_board_info[] = { /* Through a nand gate - Also beware, on V2 sensor board the * pull up resistors are missing. */ - .irq = IRQ_GPIO(99), + .irq = PXA_GPIO_TO_IRQ(99), }, { /* ITS400 Sensor board only */ .type = "tsl2561", .addr = 0x49, /* Through a nand gate - Also beware, on V2 sensor board the * pull up resistors are missing. */ - .irq = IRQ_GPIO(99), + .irq = PXA_GPIO_TO_IRQ(99), }, { /* ITS400 Sensor board only */ .type = "tmp175", .addr = 0x4A, - .irq = IRQ_GPIO(96), + .irq = PXA_GPIO_TO_IRQ(96), }, { /* IMB400 Multimedia board */ .type = "wm8940", .addr = 0x1A, @@ -661,8 +661,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_GPIO(40), - .end = IRQ_GPIO(40), + .start = PXA_GPIO_TO_IRQ(40), + .end = PXA_GPIO_TO_IRQ(40), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -707,7 +707,7 @@ static int stargate2_mci_init(struct device *dev, } gpio_direction_input(SG2_GPIO_nSD_DETECT); - err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), + err = request_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), stargate2_detect_int, IRQ_TYPE_EDGE_BOTH, "MMC card detect", @@ -738,7 +738,7 @@ static void stargate2_mci_setpower(struct device *dev, unsigned int vdd) static void stargate2_mci_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), data); + free_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), data); gpio_free(SG2_SD_POWER_ENABLE); gpio_free(SG2_GPIO_nSD_DETECT); } @@ -913,7 +913,7 @@ static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = { .type = "da9030", .addr = 0x49, .platform_data = &stargate2_da9030_pdata, - .irq = gpio_to_irq(1), + .irq = PXA_GPIO_TO_IRQ(1), }, }; @@ -938,18 +938,18 @@ static struct i2c_board_info __initdata stargate2_i2c_board_info[] = { /* Through a nand gate - Also beware, on V2 sensor board the * pull up resistors are missing. */ - .irq = IRQ_GPIO(99), + .irq = PXA_GPIO_TO_IRQ(99), }, { /* ITS400 Sensor board only */ .type = "tsl2561", .addr = 0x49, /* Through a nand gate - Also beware, on V2 sensor board the * pull up resistors are missing. */ - .irq = IRQ_GPIO(99), + .irq = PXA_GPIO_TO_IRQ(99), }, { /* ITS400 Sensor board only */ .type = "tmp175", .addr = 0x4A, - .irq = IRQ_GPIO(96), + .irq = PXA_GPIO_TO_IRQ(96), }, }; @@ -1005,6 +1005,7 @@ MACHINE_START(INTELMOTE2, "IMOTE 2") .timer = &pxa_timer, .init_machine = imote2_init, .atag_offset = 0x100, + .restart = pxa_restart, MACHINE_END #endif @@ -1017,5 +1018,6 @@ MACHINE_START(STARGATE2, "Stargate 2") .timer = &pxa_timer, .init_machine = stargate2_init, .atag_offset = 0x100, + .restart = pxa_restart, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index ad47bb98f30d..9fb38e80e076 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -85,8 +85,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)), - .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)), + .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)), + .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -495,4 +495,5 @@ MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)") .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = tavorevb_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c index fd569167302a..f7d9305cfd77 100644 --- a/arch/arm/mach-pxa/tavorevb3.c +++ b/arch/arm/mach-pxa/tavorevb3.c @@ -101,7 +101,7 @@ static struct i2c_board_info evb3_i2c_info[] = { .type = "88PM860x", .addr = 0x34, .platform_data = &evb3_pm8607_info, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)), }, }; @@ -132,4 +132,5 @@ MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)") .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = evb3_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index de684701449c..b503049d6d26 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -16,7 +16,6 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/clockchips.h> -#include <linux/sched.h> #include <asm/div64.h> #include <asm/mach/irq.h> @@ -32,18 +31,10 @@ * long as there is always less than 582 seconds between successive * calls to sched_clock() which should always be the case in practice. */ -static DEFINE_CLOCK_DATA(cd); -unsigned long long notrace sched_clock(void) +static u32 notrace pxa_read_sched_clock(void) { - u32 cyc = OSCR; - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -static void notrace pxa_update_sched_clock(void) -{ - u32 cyc = OSCR; - update_sched_clock(&cd, cyc, (u32)~0); + return OSCR; } @@ -119,7 +110,7 @@ static void __init pxa_timer_init(void) OIER = 0; OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3; - init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate); + setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate); clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4); ckevt_pxa_osmr0.max_delta_ns = diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 402b0c96613b..7ce5c436cc4e 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -404,8 +404,8 @@ static struct pda_power_pdata tosa_power_data = { static struct resource tosa_power_resource[] = { { .name = "ac", - .start = gpio_to_irq(TOSA_GPIO_AC_IN), - .end = gpio_to_irq(TOSA_GPIO_AC_IN), + .start = PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN), + .end = PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, @@ -905,7 +905,7 @@ static struct platform_device *devices[] __initdata = { static void tosa_poweroff(void) { - arm_machine_restart('g', NULL); + pxa_restart('g', NULL); } static void tosa_restart(char mode, const char *cmd) @@ -935,7 +935,6 @@ static void __init tosa_init(void) init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0); pm_power_off = tosa_poweroff; - arm_pm_restart = tosa_restart; PCFR |= PCFR_OPDE; @@ -970,6 +969,7 @@ static void __init fixup_tosa(struct tag *tags, char **cmdline, } MACHINE_START(TOSA, "SHARP Tosa") + .restart_mode = 'g', .fixup = fixup_tosa, .map_io = pxa25x_map_io, .nr_irqs = TOSA_NR_IRQS, @@ -977,4 +977,5 @@ MACHINE_START(TOSA, "SHARP Tosa") .handle_irq = pxa25x_handle_irq, .init_machine = tosa_init, .timer = &pxa_timer, + .restart = tosa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 1aaed2b17e10..0f30af617d8f 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -561,6 +561,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module") @@ -571,4 +572,5 @@ MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 242ddae332d3..023d6ca789de 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -422,8 +422,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(VIPER_ETH_GPIO), - .end = gpio_to_irq(VIPER_ETH_GPIO), + .start = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO), + .end = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, [2] = { @@ -546,7 +546,7 @@ static struct plat_serial8250_port serial_platform_data[] = { /* External UARTs */ { .mapbase = VIPER_UARTA_PHYS, - .irq = gpio_to_irq(VIPER_UARTA_GPIO), + .irq = PXA_GPIO_TO_IRQ(VIPER_UARTA_GPIO), .irqflags = IRQF_TRIGGER_RISING, .uartclk = 1843200, .regshift = 1, @@ -556,7 +556,7 @@ static struct plat_serial8250_port serial_platform_data[] = { }, { .mapbase = VIPER_UARTB_PHYS, - .irq = gpio_to_irq(VIPER_UARTB_GPIO), + .irq = PXA_GPIO_TO_IRQ(VIPER_UARTB_GPIO), .irqflags = IRQF_TRIGGER_RISING, .uartclk = 1843200, .regshift = 1, @@ -596,8 +596,8 @@ static struct resource isp116x_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = gpio_to_irq(VIPER_USB_GPIO), - .end = gpio_to_irq(VIPER_USB_GPIO), + .start = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO), + .end = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -998,4 +998,5 @@ MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC") .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = viper_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index ca0c6615028c..1f5cfa96f6d6 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -395,8 +395,8 @@ static struct resource vpac270_dm9000_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ), - .end = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -433,7 +433,7 @@ static pxa2xx_audio_ops_t vpac270_ac97_pdata = { }; static struct ucb1400_pdata vpac270_ucb1400_pdata = { - .irq = IRQ_GPIO(GPIO113_VPAC270_TS_IRQ), + .irq = PXA_GPIO_TO_IRQ(GPIO113_VPAC270_TS_IRQ), }; static struct platform_device vpac270_ucb1400_device = { @@ -610,8 +610,8 @@ static struct resource vpac270_ide_resources[] = { .flags = IORESOURCE_DMA }, [3] = { /* IDE IRQ pin */ - .start = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ), - .end = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ), .flags = IORESOURCE_IRQ } }; @@ -721,5 +721,6 @@ MACHINE_START(VPAC270, "Voipac PXA270") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, - .init_machine = vpac270_init + .init_machine = vpac270_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index 70e1730ef282..4bbe9a36fe74 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -185,5 +185,6 @@ MACHINE_START(XCEP, "Iskratel XCEP") .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index ead32c90fec1..b6476848b561 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -573,7 +573,7 @@ static struct spi_board_info spi_board_info[] __initdata = { .modalias = "libertas_spi", .platform_data = &z2_lbs_pdata, .controller_data = &z2_lbs_chip_info, - .irq = gpio_to_irq(GPIO36_ZIPITZ2_WIFI_IRQ), + .irq = PXA_GPIO_TO_IRQ(GPIO36_ZIPITZ2_WIFI_IRQ), .max_speed_hz = 13000000, .bus_num = 1, .chip_select = 0, @@ -725,4 +725,5 @@ MACHINE_START(ZIPIT2, "Zipit Z2") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = z2_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 498b83b089f3..a4dd1c347050 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -233,7 +233,7 @@ static struct plat_serial8250_port serial_platform_data[] = { /* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */ { /* COM1 */ .mapbase = 0x10000000, - .irq = gpio_to_irq(ZEUS_UARTA_GPIO), + .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTA_GPIO), .irqflags = IRQF_TRIGGER_RISING, .uartclk = 14745600, .regshift = 1, @@ -242,7 +242,7 @@ static struct plat_serial8250_port serial_platform_data[] = { }, { /* COM2 */ .mapbase = 0x10800000, - .irq = gpio_to_irq(ZEUS_UARTB_GPIO), + .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTB_GPIO), .irqflags = IRQF_TRIGGER_RISING, .uartclk = 14745600, .regshift = 1, @@ -251,7 +251,7 @@ static struct plat_serial8250_port serial_platform_data[] = { }, { /* COM3 */ .mapbase = 0x11000000, - .irq = gpio_to_irq(ZEUS_UARTC_GPIO), + .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTC_GPIO), .irqflags = IRQF_TRIGGER_RISING, .uartclk = 14745600, .regshift = 1, @@ -260,7 +260,7 @@ static struct plat_serial8250_port serial_platform_data[] = { }, { /* COM4 */ .mapbase = 0x11800000, - .irq = gpio_to_irq(ZEUS_UARTD_GPIO), + .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTD_GPIO), .irqflags = IRQF_TRIGGER_RISING, .uartclk = 14745600, .regshift = 1, @@ -321,8 +321,8 @@ static struct resource zeus_dm9k0_resource[] = { .flags = IORESOURCE_MEM }, [2] = { - .start = gpio_to_irq(ZEUS_ETH0_GPIO), - .end = gpio_to_irq(ZEUS_ETH0_GPIO), + .start = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO), + .end = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -339,8 +339,8 @@ static struct resource zeus_dm9k1_resource[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = gpio_to_irq(ZEUS_ETH1_GPIO), - .end = gpio_to_irq(ZEUS_ETH1_GPIO), + .start = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO), + .end = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -423,7 +423,7 @@ static struct spi_board_info zeus_spi_board_info[] = { [0] = { .modalias = "mcp2515", .platform_data = &zeus_mcp2515_pdata, - .irq = gpio_to_irq(ZEUS_CAN_GPIO), + .irq = PXA_GPIO_TO_IRQ(ZEUS_CAN_GPIO), .max_speed_hz = 1*1000*1000, .bus_num = 3, .mode = SPI_MODE_0, @@ -753,7 +753,7 @@ static struct i2c_board_info __initdata zeus_i2c_devices[] = { { I2C_BOARD_INFO("pca9535", 0x20), .platform_data = &zeus_pca953x_pdata[2], - .irq = gpio_to_irq(ZEUS_EXTGPIO_GPIO), + .irq = PXA_GPIO_TO_IRQ(ZEUS_EXTGPIO_GPIO), }, { I2C_BOARD_INFO("lm75a", 0x48) }, { I2C_BOARD_INFO("24c01", 0x50) }, @@ -911,5 +911,6 @@ MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS") .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = zeus_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 6c39c3328418..98eec80623e3 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -408,8 +408,8 @@ static void __init zylonite_init(void) * Note: We depend that the bootloader set * the correct value to MSC register for SMC91x. */ - smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq); - smc91x_resources[1].end = gpio_to_irq(gpio_eth_irq); + smc91x_resources[1].start = PXA_GPIO_TO_IRQ(gpio_eth_irq); + smc91x_resources[1].end = PXA_GPIO_TO_IRQ(gpio_eth_irq); platform_device_register(&smc91x_device); pxa_set_ac97_info(NULL); @@ -430,4 +430,5 @@ MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = zylonite_init, + .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 93c64d8d7de9..86e59c043de2 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -231,12 +231,12 @@ static struct i2c_board_info zylonite_i2c_board_info[] = { .type = "pca9539", .addr = 0x74, .platform_data = &gpio_exp[0], - .irq = IRQ_GPIO(18), + .irq = PXA_GPIO_TO_IRQ(18), }, { .type = "pca9539", .addr = 0x75, .platform_data = &gpio_exp[1], - .irq = IRQ_GPIO(19), + .irq = PXA_GPIO_TO_IRQ(19), }, }; diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index dba6d0c1fc17..c593be428b8f 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -12,6 +12,8 @@ config REALVIEW_EB_A9MP bool "Support Multicore Cortex-A9 Tile" depends on MACH_REALVIEW_EB select CPU_V7 + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 help Enable support for the Cortex-A9MPCore tile fitted to the Realview(R) Emulation Baseboard platform. @@ -21,6 +23,8 @@ config REALVIEW_EB_ARM11MP depends on MACH_REALVIEW_EB select CPU_V6K select ARCH_HAS_BARRIERS if SMP + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 help Enable support for the ARM11MPCore tile fitted to the Realview(R) Emulation Baseboard platform. @@ -39,6 +43,8 @@ config MACH_REALVIEW_PB11MP select CPU_V6K select ARM_GIC select HAVE_PATA_PLATFORM + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 select ARCH_HAS_BARRIERS if SMP help Include support for the ARM(R) RealView(R) Platform Baseboard for @@ -51,6 +57,7 @@ config MACH_REALVIEW_PB1176 select CPU_V6 select ARM_GIC select HAVE_TCM + select MIGHT_HAVE_CACHE_L2X0 help Include support for the ARM(R) RealView(R) Platform Baseboard for ARM1176JZF-S. @@ -78,6 +85,8 @@ config MACH_REALVIEW_PBX bool "Support RealView(R) Platform Baseboard Explore" select ARM_GIC select HAVE_PATA_PLATFORM + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET select ZONE_DMA if SPARSEMEM help diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index d5ed5d4f77d6..acd329afc3ac 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -21,7 +21,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/interrupt.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 47259c89a75e..735b57aaf2d6 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -65,6 +65,5 @@ extern int realview_usb_register(struct resource *res); extern void realview_init_early(void); extern void realview_fixup(struct tag *tags, char **from, struct meminfo *meminfo); -extern void (*realview_reset)(char); #endif diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S index 4071164aebaa..e8a5179c2653 100644 --- a/arch/arm/mach-realview/include/mach/entry-macro.S +++ b/arch/arm/mach-realview/include/mach/entry-macro.S @@ -7,8 +7,6 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <mach/hardware.h> -#include <asm/hardware/entry-macro-gic.S> .macro disable_fiq .endm diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h index 6657ff231161..471b671159ce 100644 --- a/arch/arm/mach-realview/include/mach/system.h +++ b/arch/arm/mach-realview/include/mach/system.h @@ -21,12 +21,6 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <linux/io.h> -#include <mach/hardware.h> -#include <mach/platform.h> - -void (*realview_reset)(char mode); - static inline void arch_idle(void) { /* @@ -36,15 +30,4 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ - /* - * To reset, we hit the on-board reset register - * in the system FPGA - */ - if (realview_reset) - realview_reset(mode); - dsb(); -} - #endif diff --git a/arch/arm/mach-realview/include/mach/vmalloc.h b/arch/arm/mach-realview/include/mach/vmalloc.h deleted file mode 100644 index a2a4c6861407..000000000000 --- a/arch/arm/mach-realview/include/mach/vmalloc.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/vmalloc.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END 0xf8000000UL diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 026c66ad7ec2..0069561464f9 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -21,7 +21,7 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/amba/bus.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> @@ -91,8 +91,8 @@ static struct map_desc realview_eb_io_desc[] __initdata = { static struct map_desc realview_eb11mp_io_desc[] __initdata = { { - .virtual = IO_ADDRESS(REALVIEW_EB11MP_GIC_CPU_BASE), - .pfn = __phys_to_pfn(REALVIEW_EB11MP_GIC_CPU_BASE), + .virtual = IO_ADDRESS(REALVIEW_EB11MP_SCU_BASE), + .pfn = __phys_to_pfn(REALVIEW_EB11MP_SCU_BASE), .length = SZ_4K, .type = MT_DEVICE, }, { @@ -415,7 +415,7 @@ static struct sys_timer realview_eb_timer = { .init = realview_eb_timer_init, }; -static void realview_eb_reset(char mode) +static void realview_eb_restart(char mode, const char *cmd) { void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK); @@ -427,6 +427,7 @@ static void realview_eb_reset(char mode) __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl); if (core_tile_eb11mp()) __raw_writel(0x0008, reset_ctrl); + dsb(); } static void __init realview_eb_init(void) @@ -458,7 +459,6 @@ static void __init realview_eb_init(void) #ifdef CONFIG_LEDS leds_event = realview_leds_event; #endif - realview_reset = realview_eb_reset; } MACHINE_START(REALVIEW_EB, "ARM-RealView EB") @@ -469,8 +469,10 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB") .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_eb_timer, + .handle_irq = gic_handle_irq, .init_machine = realview_eb_init, #ifdef CONFIG_ZONE_DMA .dma_zone_size = SZ_256M, #endif + .restart = realview_eb_restart, MACHINE_END diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index c057540ec776..8fe395568a47 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -21,7 +21,7 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/amba/bus.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> @@ -336,12 +336,13 @@ static struct sys_timer realview_pb1176_timer = { .init = realview_pb1176_timer_init, }; -static void realview_pb1176_reset(char mode) +static void realview_pb1176_restart(char mode, const char *cmd) { void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK); __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl); __raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl); + dsb(); } static void realview_pb1176_fixup(struct tag *tags, char **from, @@ -381,7 +382,6 @@ static void __init realview_pb1176_init(void) #ifdef CONFIG_LEDS leds_event = realview_leds_event; #endif - realview_reset = realview_pb1176_reset; } MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") @@ -392,8 +392,10 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pb1176_timer, + .handle_irq = gic_handle_irq, .init_machine = realview_pb1176_init, #ifdef CONFIG_ZONE_DMA .dma_zone_size = SZ_256M, #endif + .restart = realview_pb1176_restart, MACHINE_END diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 671ad6d6ff00..34a26011bb89 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -21,7 +21,7 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/amba/bus.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> @@ -315,7 +315,7 @@ static struct sys_timer realview_pb11mp_timer = { .init = realview_pb11mp_timer_init, }; -static void realview_pb11mp_reset(char mode) +static void realview_pb11mp_restart(char mode, const char *cmd) { void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK); @@ -327,6 +327,7 @@ static void realview_pb11mp_reset(char mode) __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl); __raw_writel(0x0000, reset_ctrl); __raw_writel(0x0004, reset_ctrl); + dsb(); } static void __init realview_pb11mp_init(void) @@ -355,7 +356,6 @@ static void __init realview_pb11mp_init(void) #ifdef CONFIG_LEDS leds_event = realview_leds_event; #endif - realview_reset = realview_pb11mp_reset; } MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") @@ -366,8 +366,10 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pb11mp_timer, + .handle_irq = gic_handle_irq, .init_machine = realview_pb11mp_init, #ifdef CONFIG_ZONE_DMA .dma_zone_size = SZ_256M, #endif + .restart = realview_pb11mp_restart, MACHINE_END diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index cbf22df4ad5b..d26a6def1d65 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -21,7 +21,7 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/amba/bus.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> @@ -271,7 +271,7 @@ static struct sys_timer realview_pba8_timer = { .init = realview_pba8_timer_init, }; -static void realview_pba8_reset(char mode) +static void realview_pba8_restart(char mode, const char *cmd) { void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK); @@ -283,6 +283,7 @@ static void realview_pba8_reset(char mode) __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl); __raw_writel(0x0000, reset_ctrl); __raw_writel(0x0004, reset_ctrl); + dsb(); } static void __init realview_pba8_init(void) @@ -305,7 +306,6 @@ static void __init realview_pba8_init(void) #ifdef CONFIG_LEDS leds_event = realview_leds_event; #endif - realview_reset = realview_pba8_reset; } MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") @@ -316,8 +316,10 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pba8_timer, + .handle_irq = gic_handle_irq, .init_machine = realview_pba8_init, #ifdef CONFIG_ZONE_DMA .dma_zone_size = SZ_256M, #endif + .restart = realview_pba8_restart, MACHINE_END diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 63c4114afae9..a250fb4124bf 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -20,7 +20,7 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/amba/bus.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> @@ -98,8 +98,8 @@ static struct map_desc realview_pbx_io_desc[] __initdata = { static struct map_desc realview_local_io_desc[] __initdata = { { - .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_CPU_BASE), - .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_CPU_BASE), + .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_SCU_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_SCU_BASE), .length = SZ_4K, .type = MT_DEVICE, }, { @@ -339,7 +339,7 @@ static void realview_pbx_fixup(struct tag *tags, char **from, #endif } -static void realview_pbx_reset(char mode) +static void realview_pbx_restart(char mode, const char *cmd) { void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK); @@ -351,6 +351,7 @@ static void realview_pbx_reset(char mode) __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl); __raw_writel(0x00F0, reset_ctrl); __raw_writel(0x00F4, reset_ctrl); + dsb(); } static void __init realview_pbx_init(void) @@ -388,7 +389,6 @@ static void __init realview_pbx_init(void) #ifdef CONFIG_LEDS leds_event = realview_leds_event; #endif - realview_reset = realview_pbx_reset; } MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") @@ -399,8 +399,10 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pbx_timer, + .handle_irq = gic_handle_irq, .init_machine = realview_pbx_init, #ifdef CONFIG_ZONE_DMA .dma_zone_size = SZ_256M, #endif + .restart = realview_pbx_restart, MACHINE_END diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h index 45c7b935dc45..359bab94b6af 100644 --- a/arch/arm/mach-rpc/include/mach/system.h +++ b/arch/arm/mach-rpc/include/mach/system.h @@ -7,21 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/io.h> -#include <mach/hardware.h> -#include <asm/hardware/iomd.h> - static inline void arch_idle(void) { cpu_do_idle(); } - -static inline void arch_reset(char mode, const char *cmd) -{ - iomd_writeb(0, IOMD_ROMCR0); - - /* - * Jump into the ROM - */ - cpu_reset(0); -} diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h deleted file mode 100644 index fb700228637a..000000000000 --- a/arch/arm/mach-rpc/include/mach/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-rpc/include/mach/vmalloc.h - * - * Copyright (C) 1997 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define VMALLOC_END 0xdc000000UL diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index 8559598ab767..3d44a59fc0df 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -24,6 +24,7 @@ #include <asm/elf.h> #include <asm/mach-types.h> #include <mach/hardware.h> +#include <asm/hardware/iomd.h> #include <asm/page.h> #include <asm/domain.h> #include <asm/setup.h> @@ -214,6 +215,16 @@ static int __init rpc_init(void) arch_initcall(rpc_init); +static void rpc_restart(char mode, const char *cmd) +{ + iomd_writeb(0, IOMD_ROMCR0); + + /* + * Jump into the ROM + */ + soft_restart(0); +} + extern struct sys_timer ioc_timer; MACHINE_START(RISCPC, "Acorn-RiscPC") @@ -224,4 +235,5 @@ MACHINE_START(RISCPC, "Acorn-RiscPC") .map_io = rpc_map_io, .init_irq = rpc_init_irq, .timer = &ioc_timer, + .restart = rpc_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c index bc53d2d16d1a..ac7b2ad5c405 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c2410/bast-irq.c @@ -24,7 +24,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/ioport.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/io.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-s3c2410/common.h b/arch/arm/mach-s3c2410/common.h new file mode 100644 index 000000000000..f65dc8062961 --- /dev/null +++ b/arch/arm/mach-s3c2410/common.h @@ -0,0 +1,17 @@ +/* + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Common Header for S3C2410 machines + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_S3C2410_COMMON_H +#define __ARCH_ARM_MACH_S3C2410_COMMON_H + +void s3c2410_restart(char mode, const char *cmd); + +#endif /* __ARCH_ARM_MACH_S3C2410_COMMON_H */ diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c index 75189df995ae..7dc6c46b5e2b 100644 --- a/arch/arm/mach-s3c2410/cpu-freq.c +++ b/arch/arm/mach-s3c2410/cpu-freq.c @@ -16,7 +16,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/cpufreq.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> @@ -115,24 +115,25 @@ static struct s3c_cpufreq_info s3c2410_cpufreq_info = { .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), }; -static int s3c2410_cpufreq_add(struct sys_device *sysdev) +static int s3c2410_cpufreq_add(struct device *dev) { return s3c_cpufreq_register(&s3c2410_cpufreq_info); } -static struct sysdev_driver s3c2410_cpufreq_driver = { - .add = s3c2410_cpufreq_add, +static struct subsys_interface s3c2410_cpufreq_interface = { + .name = "s3c2410_cpufreq", + .subsys = &s3c2410_subsys, + .add_dev = s3c2410_cpufreq_add, }; static int __init s3c2410_cpufreq_init(void) { - return sysdev_driver_register(&s3c2410_sysclass, - &s3c2410_cpufreq_driver); + return subsys_interface_register(&s3c2410_cpufreq_interface); } arch_initcall(s3c2410_cpufreq_init); -static int s3c2410a_cpufreq_add(struct sys_device *sysdev) +static int s3c2410a_cpufreq_add(struct device *dev) { /* alter the maximum freq settings for S3C2410A. If a board knows * it only has a maximum of 200, then it should register its own @@ -143,17 +144,18 @@ static int s3c2410a_cpufreq_add(struct sys_device *sysdev) s3c2410_cpufreq_info.max.pclk = 66500000; s3c2410_cpufreq_info.name = "s3c2410a"; - return s3c2410_cpufreq_add(sysdev); + return s3c2410_cpufreq_add(dev); } -static struct sysdev_driver s3c2410a_cpufreq_driver = { - .add = s3c2410a_cpufreq_add, +static struct subsys_interface s3c2410a_cpufreq_interface = { + .name = "s3c2410a_cpufreq", + .subsys = &s3c2410a_subsys, + .add_dev = s3c2410a_cpufreq_add, }; static int __init s3c2410a_cpufreq_init(void) { - return sysdev_driver_register(&s3c2410a_sysclass, - &s3c2410a_cpufreq_driver); + return subsys_interface_register(&s3c2410a_cpufreq_interface); } arch_initcall(s3c2410a_cpufreq_init); diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index dbe43df8cfec..2afd00014a77 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -14,7 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/serial_core.h> #include <mach/map.h> @@ -132,7 +132,7 @@ static struct s3c24xx_dma_order __initdata s3c2410_dma_order = { }, }; -static int __init s3c2410_dma_add(struct sys_device *sysdev) +static int __init s3c2410_dma_add(struct device *dev) { s3c2410_dma_init(); s3c24xx_dma_order_set(&s3c2410_dma_order); @@ -140,24 +140,28 @@ static int __init s3c2410_dma_add(struct sys_device *sysdev) } #if defined(CONFIG_CPU_S3C2410) -static struct sysdev_driver s3c2410_dma_driver = { - .add = s3c2410_dma_add, +static struct subsys_interface s3c2410_dma_interface = { + .name = "s3c2410_dma", + .subsys = &s3c2410_subsys, + .add_dev = s3c2410_dma_add, }; static int __init s3c2410_dma_drvinit(void) { - return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver); + return subsys_interface_register(&s3c2410_interface); } arch_initcall(s3c2410_dma_drvinit); -static struct sysdev_driver s3c2410a_dma_driver = { - .add = s3c2410_dma_add, +static struct subsys_interface s3c2410a_dma_interface = { + .name = "s3c2410a_dma", + .subsys = &s3c2410a_subsys, + .add_dev = s3c2410_dma_add, }; static int __init s3c2410a_dma_drvinit(void) { - return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_dma_driver); + return subsys_interface_register(&s3c2410a_dma_interface); } arch_initcall(s3c2410a_dma_drvinit); @@ -165,13 +169,15 @@ arch_initcall(s3c2410a_dma_drvinit); #if defined(CONFIG_CPU_S3C2442) /* S3C2442 DMA contains the same selection table as the S3C2410 */ -static struct sysdev_driver s3c2442_dma_driver = { - .add = s3c2410_dma_add, +static struct subsys_interface s3c2442_dma_interface = { + .name = "s3c2442_dma", + .subsys = &s3c2442_subsys, + .add_dev = s3c2410_dma_add, }; static int __init s3c2442_dma_drvinit(void) { - return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver); + return subsys_interface_register(&s3c2442_dma_interface); } arch_initcall(s3c2442_dma_drvinit); diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h index ae8e482b6427..acbdfecd4186 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H __FILE__ -#include <linux/sysdev.h> +#include <linux/device.h> #define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ @@ -202,7 +202,7 @@ struct s3c2410_dma_chan { struct s3c2410_dma_buf *end; /* end of queue */ /* system device */ - struct sys_device dev; + struct device dev; }; typedef unsigned long dma_device_t; diff --git a/arch/arm/mach-s3c2410/include/mach/reset.h b/arch/arm/mach-s3c2410/include/mach/reset.h deleted file mode 100644 index f8c9387b049d..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/reset.h +++ /dev/null @@ -1,22 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/reset.h - * - * Copyright (c) 2007 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 CPU reset controls -*/ - -#ifndef __ASM_ARCH_RESET_H -#define __ASM_ARCH_RESET_H __FILE__ - -/* This allows the over-ride of the default reset code -*/ - -extern void (*s3c24xx_reset_hook)(void); - -#endif /* __ASM_ARCH_RESET_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h deleted file mode 100644 index 6faadcee7729..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/system-reset.h +++ /dev/null @@ -1,32 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/system-reset.h - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - System define for arch_reset() function - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <mach/hardware.h> -#include <plat/watchdog-reset.h> - -extern void (*s3c24xx_reset_hook)(void); - -static void -arch_reset(char mode, const char *cmd) -{ - if (mode == 's') { - cpu_reset(0); - } - - if (s3c24xx_reset_hook) - s3c24xx_reset_hook(); - - arch_wdt_reset(); - - /* we'll take a jump through zero as a poor second */ - cpu_reset(0); -} diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h index a8cbca6701e5..5e215c1a5c8f 100644 --- a/arch/arm/mach-s3c2410/include/mach/system.h +++ b/arch/arm/mach-s3c2410/include/mach/system.h @@ -15,12 +15,10 @@ #include <mach/map.h> #include <mach/idle.h> -#include <mach/reset.h> #include <mach/regs-clock.h> void (*s3c24xx_idle)(void); -void (*s3c24xx_reset_hook)(void); void s3c24xx_default_idle(void) { @@ -54,5 +52,3 @@ static void arch_idle(void) else s3c24xx_default_idle(); } - -#include <mach/system-reset.h> diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h deleted file mode 100644 index 7a311e8dddba..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/vmalloc.h - * - * from arch/arm/mach-iop3xx/include/mach/vmalloc.h - * - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 vmalloc definition -*/ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END 0xF6000000UL - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index 79838942b0ac..4220cc60de3c 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -63,6 +63,8 @@ #include <linux/mtd/map.h> #include <linux/mtd/physmap.h> +#include "common.h" + static struct resource amlm5900_nor_resource = { .start = 0x00000000, .end = 0x01000000 - 1, @@ -241,4 +243,5 @@ MACHINE_START(AML_M5900, "AML_M5900") .init_irq = s3c24xx_init_irq, .init_machine = amlm5900_init, .timer = &s3c24xx_timer, + .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index a20ae1ad4062..feeaf73933dc 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -66,6 +66,7 @@ #include "usb-simtec.h" #include "nor-simtec.h" +#include "common.h" #define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics" @@ -164,22 +165,6 @@ static struct map_desc bast_iodesc[] __initdata = { #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE -static struct s3c24xx_uart_clksrc bast_serial_clocks[] = { - [0] = { - .name = "uclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - } -}; - - static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { [0] = { .hwport = 0, @@ -187,8 +172,6 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = bast_serial_clocks, - .clocks_size = ARRAY_SIZE(bast_serial_clocks), }, [1] = { .hwport = 1, @@ -196,8 +179,6 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = bast_serial_clocks, - .clocks_size = ARRAY_SIZE(bast_serial_clocks), }, /* port 2 is not actually used */ [2] = { @@ -206,8 +187,6 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = bast_serial_clocks, - .clocks_size = ARRAY_SIZE(bast_serial_clocks), } }; @@ -662,4 +641,5 @@ MACHINE_START(BAST, "Simtec-BAST") .init_irq = s3c24xx_init_irq, .init_machine = bast_init, .timer = &s3c24xx_timer, + .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 05a7d16e59f5..41245a603981 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -18,7 +18,7 @@ #include <linux/memblock.h> #include <linux/timer.h> #include <linux/init.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -70,6 +70,8 @@ #include <sound/uda1380.h> +#include "common.h" + #define H1940_LATCH ((void __force __iomem *)0xF8000000) #define H1940_PA_LATCH S3C2410_CS2 @@ -751,4 +753,5 @@ MACHINE_START(H1940, "IPAQ-H1940") .init_irq = h1940_init_irq, .init_machine = h1940_init, .timer = &s3c24xx_timer, + .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 1dc3e3234417..383d00ca8f60 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -51,6 +51,8 @@ #include <plat/s3c2410.h> #include <plat/udc.h> +#include "common.h" + static struct map_desc n30_iodesc[] __initdata = { /* nothing here yet */ }; @@ -591,6 +593,7 @@ MACHINE_START(N30, "Acer-N30") .init_machine = n30_init, .init_irq = s3c24xx_init_irq, .map_io = n30_map_io, + .restart = s3c2410_restart, MACHINE_END MACHINE_START(N35, "Acer-N35") @@ -601,4 +604,5 @@ MACHINE_START(N35, "Acer-N35") .init_machine = n30_init, .init_irq = s3c24xx_init_irq, .map_io = n30_map_io, + .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index f03f3fd9cec9..5f1e0eeb38a9 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -38,6 +38,8 @@ #include <plat/iic.h> #include <plat/cpu.h> +#include "common.h" + static struct map_desc otom11_iodesc[] __initdata = { /* Device area */ { (u32)OTOM_VA_CS8900A_BASE, OTOM_PA_CS8900A_BASE, SZ_16M, MT_DEVICE }, @@ -121,4 +123,5 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1") .init_machine = otom11_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, + .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index 451852156254..91c16d9d2459 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -28,7 +28,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/gpio.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/platform_device.h> #include <linux/serial_core.h> #include <linux/spi/spi.h> @@ -62,6 +62,8 @@ #include <plat/cpu.h> #include <plat/pm.h> +#include "common.h" + static struct map_desc qt2410_iodesc[] __initdata = { { 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE } }; @@ -350,6 +352,5 @@ MACHINE_START(QT2410, "QT2410") .init_irq = s3c24xx_init_irq, .init_machine = qt2410_machine_init, .timer = &s3c24xx_timer, + .restart = s3c2410_restart, MACHINE_END - - diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index 99c9dfdb71c7..bdc27e772876 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -54,6 +54,8 @@ #include <plat/common-smdk.h> +#include "common.h" + static struct map_desc smdk2410_iodesc[] __initdata = { /* nothing here yet */ }; @@ -116,6 +118,5 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc .init_irq = s3c24xx_init_irq, .init_machine = smdk2410_init, .timer = &s3c24xx_timer, + .restart = s3c2410_restart, MACHINE_END - - diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c index e0d0b6fb2800..1114666f0efb 100644 --- a/arch/arm/mach-s3c2410/mach-tct_hammer.c +++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c @@ -54,6 +54,8 @@ #include <linux/mtd/map.h> #include <linux/mtd/physmap.h> +#include "common.h" + static struct resource tct_hammer_nor_resource = { .start = 0x00000000, .end = 0x01000000 - 1, @@ -151,4 +153,5 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER") .init_irq = s3c24xx_init_irq, .init_machine = tct_hammer_init, .timer = &s3c24xx_timer, + .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index df47e8e90065..dbe668a803ef 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -53,6 +53,7 @@ #include "usb-simtec.h" #include "nor-simtec.h" +#include "common.h" /* macros for virtual address mods for the io space entries */ #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5) @@ -109,23 +110,6 @@ static struct map_desc vr1000_iodesc[] __initdata = { #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE -/* uart clock source(s) */ - -static struct s3c24xx_uart_clksrc vr1000_serial_clocks[] = { - [0] = { - .name = "uclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0. - } -}; - static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = { [0] = { .hwport = 0, @@ -133,8 +117,6 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = vr1000_serial_clocks, - .clocks_size = ARRAY_SIZE(vr1000_serial_clocks), }, [1] = { .hwport = 1, @@ -142,8 +124,6 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = vr1000_serial_clocks, - .clocks_size = ARRAY_SIZE(vr1000_serial_clocks), }, /* port 2 is not actually used */ [2] = { @@ -152,9 +132,6 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = vr1000_serial_clocks, - .clocks_size = ARRAY_SIZE(vr1000_serial_clocks), - } }; @@ -405,4 +382,5 @@ MACHINE_START(VR1000, "Thorcom-VR1000") .init_machine = vr1000_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, + .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c index 8338865e11c0..c07438bfc99f 100644 --- a/arch/arm/mach-s3c2410/pll.c +++ b/arch/arm/mach-s3c2410/pll.c @@ -25,7 +25,7 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/list.h> #include <linux/clk.h> #include <linux/err.h> @@ -66,30 +66,34 @@ static struct cpufreq_frequency_table pll_vals_12MHz[] = { { .frequency = 270000000, .index = PLLVAL(127, 1, 1), }, }; -static int s3c2410_plls_add(struct sys_device *dev) +static int s3c2410_plls_add(struct device *dev) { return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz)); } -static struct sysdev_driver s3c2410_plls_drv = { - .add = s3c2410_plls_add, +static struct subsys_interface s3c2410_plls_interface = { + .name = "s3c2410_plls", + .subsys = &s3c2410_subsys, + .add_dev = s3c2410_plls_add, }; static int __init s3c2410_pll_init(void) { - return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_plls_drv); + return subsys_interface_register(&s3c2410_plls_interface); } arch_initcall(s3c2410_pll_init); -static struct sysdev_driver s3c2410a_plls_drv = { - .add = s3c2410_plls_add, +static struct subsys_interface s3c2410a_plls_interface = { + .name = "s3c2410a_plls", + .subsys = &s3c2410a_subsys, + .add_dev = s3c2410_plls_add, }; static int __init s3c2410a_pll_init(void) { - return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_plls_drv); + return subsys_interface_register(&s3c2410a_plls_interface); } arch_initcall(s3c2410a_pll_init); diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index 4728f9aa7df1..fda5385deff6 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -24,7 +24,7 @@ #include <linux/suspend.h> #include <linux/errno.h> #include <linux/time.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/gpio.h> #include <linux/io.h> @@ -111,7 +111,7 @@ struct syscore_ops s3c2410_pm_syscore_ops = { .resume = s3c2410_pm_resume, }; -static int s3c2410_pm_add(struct sys_device *dev) +static int s3c2410_pm_add(struct device *dev) { pm_cpu_prep = s3c2410_pm_prepare; pm_cpu_sleep = s3c2410_cpu_suspend; @@ -120,52 +120,60 @@ static int s3c2410_pm_add(struct sys_device *dev) } #if defined(CONFIG_CPU_S3C2410) -static struct sysdev_driver s3c2410_pm_driver = { - .add = s3c2410_pm_add, +static struct subsys_interface s3c2410_pm_interface = { + .name = "s3c2410_pm", + .subsys = &s3c2410_subsys, + .add_dev = s3c2410_pm_add, }; /* register ourselves */ static int __init s3c2410_pm_drvinit(void) { - return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver); + return subsys_interface_register(&s3c2410_pm_interface); } arch_initcall(s3c2410_pm_drvinit); -static struct sysdev_driver s3c2410a_pm_driver = { - .add = s3c2410_pm_add, +static struct subsys_interface s3c2410a_pm_interface = { + .name = "s3c2410a_pm", + .subsys = &s3c2410a_subsys, + .add_dev = s3c2410_pm_add, }; static int __init s3c2410a_pm_drvinit(void) { - return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_pm_driver); + return subsys_interface_register(&s3c2410a_pm_interface); } arch_initcall(s3c2410a_pm_drvinit); #endif #if defined(CONFIG_CPU_S3C2440) -static struct sysdev_driver s3c2440_pm_driver = { - .add = s3c2410_pm_add, +static struct subsys_interface s3c2440_pm_interface = { + .name = "s3c2440_pm", + .subsys = &s3c2440_subsys, + .add_dev = s3c2410_pm_add, }; static int __init s3c2440_pm_drvinit(void) { - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver); + return subsys_interface_register(&s3c2440_pm_interface); } arch_initcall(s3c2440_pm_drvinit); #endif #if defined(CONFIG_CPU_S3C2442) -static struct sysdev_driver s3c2442_pm_driver = { - .add = s3c2410_pm_add, +static struct subsys_interface s3c2442_pm_interface = { + .name = "s3c2442_pm", + .subsys = &s3c2442_subsys, + .add_dev = s3c2410_pm_add, }; static int __init s3c2442_pm_drvinit(void) { - return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver); + return subsys_interface_register(&s3c2442_pm_interface); } arch_initcall(s3c2442_pm_drvinit); diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index 3d7ebc557a72..061b6bb1a557 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -18,7 +18,7 @@ #include <linux/init.h> #include <linux/gpio.h> #include <linux/clk.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> #include <linux/platform_device.h> @@ -42,6 +42,7 @@ #include <plat/clock.h> #include <plat/pll.h> #include <plat/pm.h> +#include <plat/watchdog-reset.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> @@ -123,30 +124,38 @@ static struct clk s3c2410_armclk = { .id = -1, }; +static struct clk_lookup s3c2410_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), +}; + void __init s3c2410_init_clocks(int xtal) { s3c24xx_register_baseclocks(xtal); s3c2410_setup_clocks(); s3c2410_baseclk_add(); s3c24xx_register_clock(&s3c2410_armclk); + clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup)); } -struct sysdev_class s3c2410_sysclass = { +struct bus_type s3c2410_subsys = { .name = "s3c2410-core", + .dev_name = "s3c2410-core", }; /* Note, we would have liked to name this s3c2410-core, but we cannot - * register two sysdev_class with the same name. + * register two subsystems with the same name. */ -struct sysdev_class s3c2410a_sysclass = { +struct bus_type s3c2410a_subsys = { .name = "s3c2410a-core", + .dev_name = "s3c2410a-core", }; -static struct sys_device s3c2410_sysdev = { - .cls = &s3c2410_sysclass, +static struct device s3c2410_dev = { + .bus = &s3c2410_subsys, }; -/* need to register class before we actually register the device, and +/* need to register the subsystem before we actually register the device, and * we also need to ensure that it has been initialised before any of the * drivers even try to use it (even if not on an s3c2410 based system) * as a driver which may support both 2410 and 2440 may try and use it. @@ -154,14 +163,14 @@ static struct sys_device s3c2410_sysdev = { static int __init s3c2410_core_init(void) { - return sysdev_class_register(&s3c2410_sysclass); + return subsys_system_register(&s3c2410_subsys, NULL); } core_initcall(s3c2410_core_init); static int __init s3c2410a_core_init(void) { - return sysdev_class_register(&s3c2410a_sysclass); + return subsys_system_register(&s3c2410a_subsys, NULL); } core_initcall(s3c2410a_core_init); @@ -175,11 +184,23 @@ int __init s3c2410_init(void) #endif register_syscore_ops(&s3c24xx_irq_syscore_ops); - return sysdev_register(&s3c2410_sysdev); + return device_register(&s3c2410_dev); } int __init s3c2410a_init(void) { - s3c2410_sysdev.cls = &s3c2410a_sysclass; + s3c2410_dev.bus = &s3c2410a_subsys; return s3c2410_init(); } + +void s3c2410_restart(char mode, const char *cmd) +{ + if (mode == 's') { + soft_restart(0); + } + + arch_wdt_reset(); + + /* we'll take a jump through zero as a poor second */ + soft_restart(0); +} diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c index 140711db6c89..d10b695a9066 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c @@ -26,7 +26,7 @@ #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/clk.h> #include <linux/mutex.h> #include <linux/delay.h> @@ -659,6 +659,12 @@ static struct clk *clks[] __initdata = { &clk_armclk, }; +static struct clk_lookup s3c2412_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk), +}; + int __init s3c2412_baseclk_add(void) { unsigned long clkcon = __raw_readl(S3C2410_CLKCON); @@ -751,6 +757,7 @@ int __init s3c2412_baseclk_add(void) s3c2412_clkcon_enable(clkp, 0); } + clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup)); s3c_pwmclk_init(); return 0; } diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c index eb3ea1721335..d8664b7652ce 100644 --- a/arch/arm/mach-s3c2412/cpu-freq.c +++ b/arch/arm/mach-s3c2412/cpu-freq.c @@ -16,7 +16,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/cpufreq.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/delay.h> #include <linux/clk.h> #include <linux/err.h> @@ -194,7 +194,7 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = { .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs), }; -static int s3c2412_cpufreq_add(struct sys_device *sysdev) +static int s3c2412_cpufreq_add(struct device *dev) { unsigned long fclk_rate; @@ -244,14 +244,15 @@ err_fclk: return -ENOENT; } -static struct sysdev_driver s3c2412_cpufreq_driver = { - .add = s3c2412_cpufreq_add, +static struct subsys_interface s3c2412_cpufreq_interface = { + .name = "s3c2412_cpufreq", + .subsys = &s3c2412_subsys, + .add_dev = s3c2412_cpufreq_add, }; static int s3c2412_cpufreq_init(void) { - return sysdev_driver_register(&s3c2412_sysclass, - &s3c2412_cpufreq_driver); + return subsys_interface_register(&s3c2412_cpufreq_interface); } arch_initcall(s3c2412_cpufreq_init); diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index d2a7d5ef3e67..142acd3b5e15 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -14,7 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/serial_core.h> #include <linux/io.h> @@ -159,19 +159,21 @@ static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = { .map_size = ARRAY_SIZE(s3c2412_dma_mappings), }; -static int __init s3c2412_dma_add(struct sys_device *sysdev) +static int __init s3c2412_dma_add(struct device *dev) { s3c2410_dma_init(); return s3c24xx_dma_init_map(&s3c2412_dma_sel); } -static struct sysdev_driver s3c2412_dma_driver = { - .add = s3c2412_dma_add, +static struct subsys_interface s3c2412_dma_interface = { + .name = "s3c2412_dma", + .subsys = &s3c2412_subsys, + .add_dev = s3c2412_dma_add, }; static int __init s3c2412_dma_init(void) { - return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_dma_driver); + return subsys_interface_register(&s3c2412_dma_interface); } arch_initcall(s3c2412_dma_init); diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c index 1a1aa220972b..a8a46c1644f4 100644 --- a/arch/arm/mach-s3c2412/irq.c +++ b/arch/arm/mach-s3c2412/irq.c @@ -23,7 +23,7 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/ioport.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/io.h> #include <mach/hardware.h> @@ -170,7 +170,7 @@ static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state) static struct irq_chip s3c2412_irq_rtc_chip; -static int s3c2412_irq_add(struct sys_device *sysdev) +static int s3c2412_irq_add(struct device *dev) { unsigned int irqno; @@ -200,13 +200,15 @@ static int s3c2412_irq_add(struct sys_device *sysdev) return 0; } -static struct sysdev_driver s3c2412_irq_driver = { - .add = s3c2412_irq_add, +static struct subsys_interface s3c2412_irq_interface = { + .name = "s3c2412_irq", + .subsys = &s3c2412_subsys, + .add_dev = s3c2412_irq_add, }; static int s3c2412_irq_init(void) { - return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_irq_driver); + return subsys_interface_register(&s3c2412_irq_interface); } arch_initcall(s3c2412_irq_init); diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 286ef1738c61..ae73ba34ecc6 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -48,6 +48,7 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> +#include <plat/s3c2412.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> @@ -661,4 +662,5 @@ MACHINE_START(JIVE, "JIVE") .map_io = jive_map_io, .init_machine = jive_machine_init, .timer = &s3c24xx_timer, + .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index f1eec1b54932..b11451b853d8 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -134,6 +134,7 @@ MACHINE_START(S3C2413, "S3C2413") .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, .timer = &s3c24xx_timer, + .restart = s3c2412_restart, MACHINE_END MACHINE_START(SMDK2412, "SMDK2412") @@ -145,6 +146,7 @@ MACHINE_START(SMDK2412, "SMDK2412") .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, .timer = &s3c24xx_timer, + .restart = s3c2412_restart, MACHINE_END MACHINE_START(SMDK2413, "SMDK2413") @@ -156,4 +158,5 @@ MACHINE_START(SMDK2413, "SMDK2413") .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, .timer = &s3c24xx_timer, + .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c index 1bbb1ef5f4ff..94bfaa1fb148 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c2412/mach-vstms.c @@ -162,4 +162,5 @@ MACHINE_START(VSTMS, "VSTMS") .init_machine = vstms_init, .map_io = vstms_map_io, .timer = &s3c24xx_timer, + .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index f4077efa51fa..d1adfa65f66d 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -16,7 +16,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -56,7 +56,7 @@ static void s3c2412_pm_prepare(void) { } -static int s3c2412_pm_add(struct sys_device *sysdev) +static int s3c2412_pm_add(struct device *dev) { pm_cpu_prep = s3c2412_pm_prepare; pm_cpu_sleep = s3c2412_cpu_suspend; @@ -87,13 +87,15 @@ static struct sleep_save s3c2412_sleep[] = { SAVE_ITEM(S3C2413_GPJSLPCON), }; -static struct sysdev_driver s3c2412_pm_driver = { - .add = s3c2412_pm_add, +static struct subsys_interface s3c2412_pm_interface = { + .name = "s3c2412_pm", + .subsys = &s3c2412_subsys, + .add_dev = s3c2412_pm_add, }; static __init int s3c2412_pm_init(void) { - return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver); + return subsys_interface_register(&s3c2412_pm_interface); } arch_initcall(s3c2412_pm_init); diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index 57a1e01e4e50..aff6e85a97c6 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -18,7 +18,7 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/delay.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> #include <linux/platform_device.h> @@ -32,7 +32,6 @@ #include <asm/proc-fns.h> #include <asm/irq.h> -#include <mach/reset.h> #include <mach/idle.h> #include <plat/cpu-freq.h> @@ -131,8 +130,11 @@ static void s3c2412_idle(void) cpu_do_idle(); } -static void s3c2412_hard_reset(void) +void s3c2412_restart(char mode, const char *cmd) { + if (mode == 's') + soft_restart(0); + /* errata "Watch-dog/Software Reset Problem" specifies that * this reset must be done with the SYSCLK sourced from * EXTCLK instead of FOUT to avoid a glitch in the reset @@ -164,10 +166,6 @@ void __init s3c2412_map_io(void) s3c24xx_idle = s3c2412_idle; - /* set custom reset hook */ - - s3c24xx_reset_hook = s3c2412_hard_reset; - /* register our io-tables */ iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc)); @@ -220,25 +218,26 @@ void __init s3c2412_init_clocks(int xtal) s3c2412_baseclk_add(); } -/* need to register class before we actually register the device, and +/* need to register the subsystem before we actually register the device, and * we also need to ensure that it has been initialised before any of the * drivers even try to use it (even if not on an s3c2412 based system) * as a driver which may support both 2410 and 2440 may try and use it. */ -struct sysdev_class s3c2412_sysclass = { +struct bus_type s3c2412_subsys = { .name = "s3c2412-core", + .dev_name = "s3c2412-core", }; static int __init s3c2412_core_init(void) { - return sysdev_class_register(&s3c2412_sysclass); + return subsys_system_register(&s3c2412_subsys, NULL); } core_initcall(s3c2412_core_init); -static struct sys_device s3c2412_sysdev = { - .cls = &s3c2412_sysclass, +static struct device s3c2412_dev = { + .bus = &s3c2412_subsys, }; int __init s3c2412_init(void) @@ -250,5 +249,5 @@ int __init s3c2412_init(void) #endif register_syscore_ops(&s3c24xx_irq_syscore_ops); - return sysdev_register(&s3c2412_sysdev); + return device_register(&s3c2412_dev); } diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile index 7b805b279caf..ca0cd227f873 100644 --- a/arch/arm/mach-s3c2416/Makefile +++ b/arch/arm/mach-s3c2416/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_S3C2416_PM) += pm.o #obj-$(CONFIG_S3C2416_DMA) += dma.o # Device setup -obj-$(CONFIG_S3C2416_SETUP_SDHCI) += setup-sdhci.o obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o # Machine support diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c index afbbe8bc21d1..59f54d1d7f8b 100644 --- a/arch/arm/mach-s3c2416/clock.c +++ b/arch/arm/mach-s3c2416/clock.c @@ -90,39 +90,38 @@ static struct clksrc_clk hsmmc_div[] = { }, }; -static struct clksrc_clk hsmmc_mux[] = { - [0] = { - .clk = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.0", - .ctrlbit = (1 << 6), - .enable = s3c2443_clkcon_enable_s, - }, - .sources = &(struct clksrc_sources) { - .nr_sources = 2, - .sources = (struct clk *[]) { - [0] = &hsmmc_div[0].clk, - [1] = NULL, /* to fix */ - }, - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 }, +static struct clksrc_clk hsmmc_mux0 = { + .clk = { + .name = "hsmmc-if", + .devname = "s3c-sdhci.0", + .ctrlbit = (1 << 6), + .enable = s3c2443_clkcon_enable_s, }, - [1] = { - .clk = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.1", - .ctrlbit = (1 << 12), - .enable = s3c2443_clkcon_enable_s, + .sources = &(struct clksrc_sources) { + .nr_sources = 2, + .sources = (struct clk * []) { + [0] = &hsmmc_div[0].clk, + [1] = NULL, /* to fix */ }, - .sources = &(struct clksrc_sources) { - .nr_sources = 2, - .sources = (struct clk *[]) { - [0] = &hsmmc_div[1].clk, - [1] = NULL, /* to fix */ - }, + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 }, +}; + +static struct clksrc_clk hsmmc_mux1 = { + .clk = { + .name = "hsmmc-if", + .devname = "s3c-sdhci.1", + .ctrlbit = (1 << 12), + .enable = s3c2443_clkcon_enable_s, + }, + .sources = &(struct clksrc_sources) { + .nr_sources = 2, + .sources = (struct clk * []) { + [0] = &hsmmc_div[1].clk, + [1] = NULL, /* to fix */ }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 }, }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 }, }; static struct clk hsmmc0_clk = { @@ -144,8 +143,14 @@ static struct clksrc_clk *clksrcs[] __initdata = { &hsspi_mux, &hsmmc_div[0], &hsmmc_div[1], - &hsmmc_mux[0], - &hsmmc_mux[1], + &hsmmc_mux0, + &hsmmc_mux1, +}; + +static struct clk_lookup s3c2416_clk_lookup[] = { + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk), }; void __init s3c2416_init_clocks(int xtal) @@ -167,6 +172,7 @@ void __init s3c2416_init_clocks(int xtal) s3c_register_clksrc(clksrcs[ptr], 1); s3c24xx_register_clock(&hsmmc0_clk); + clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup)); s3c_pwmclk_init(); diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c index 28ad20d42445..36df761061de 100644 --- a/arch/arm/mach-s3c2416/irq.c +++ b/arch/arm/mach-s3c2416/irq.c @@ -25,7 +25,7 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/ioport.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/io.h> #include <mach/hardware.h> @@ -213,7 +213,7 @@ static int __init s3c2416_add_sub(unsigned int base, return 0; } -static int __init s3c2416_irq_add(struct sys_device *sysdev) +static int __init s3c2416_irq_add(struct device *dev) { printk(KERN_INFO "S3C2416: IRQ Support\n"); @@ -234,13 +234,15 @@ static int __init s3c2416_irq_add(struct sys_device *sysdev) return 0; } -static struct sysdev_driver s3c2416_irq_driver = { - .add = s3c2416_irq_add, +static struct subsys_interface s3c2416_irq_interface = { + .name = "s3c2416_irq", + .subsys = &s3c2416_subsys, + .add_dev = s3c2416_irq_add, }; static int __init s3c2416_irq_init(void) { - return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_irq_driver); + return subsys_interface_register(&s3c2416_irq_interface); } arch_initcall(s3c2416_irq_init); diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c index a9eee531ca76..eebe1e72b93e 100644 --- a/arch/arm/mach-s3c2416/mach-smdk2416.c +++ b/arch/arm/mach-s3c2416/mach-smdk2416.c @@ -50,6 +50,7 @@ #include <plat/nand.h> #include <plat/sdhci.h> #include <plat/udc.h> +#include <linux/platform_data/s3c-hsudc.h> #include <plat/regs-fb-v4.h> #include <plat/fb.h> @@ -251,4 +252,5 @@ MACHINE_START(SMDK2416, "SMDK2416") .map_io = smdk2416_map_io, .init_machine = smdk2416_machine_init, .timer = &s3c24xx_timer, + .restart = s3c2416_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c index 9ec54f1d8e75..3bdb15a0d419 100644 --- a/arch/arm/mach-s3c2416/pm.c +++ b/arch/arm/mach-s3c2416/pm.c @@ -10,7 +10,7 @@ * published by the Free Software Foundation. */ -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/io.h> @@ -48,7 +48,7 @@ static void s3c2416_pm_prepare(void) __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1); } -static int s3c2416_pm_add(struct sys_device *sysdev) +static int s3c2416_pm_add(struct device *dev) { pm_cpu_prep = s3c2416_pm_prepare; pm_cpu_sleep = s3c2416_cpu_suspend; @@ -56,13 +56,15 @@ static int s3c2416_pm_add(struct sys_device *sysdev) return 0; } -static struct sysdev_driver s3c2416_pm_driver = { - .add = s3c2416_pm_add, +static struct subsys_interface s3c2416_pm_interface = { + .name = "s3c2416_pm", + .subsys = &s3c2416_subsys, + .add_dev = s3c2416_pm_add, }; static __init int s3c2416_pm_init(void) { - return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_pm_driver); + return subsys_interface_register(&s3c2416_pm_interface); } arch_initcall(s3c2416_pm_init); diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c index ee214bc83c83..5287d2808d3e 100644 --- a/arch/arm/mach-s3c2416/s3c2416.c +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -31,7 +31,7 @@ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/serial_core.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/clk.h> #include <linux/io.h> @@ -44,7 +44,6 @@ #include <asm/proc-fns.h> #include <asm/irq.h> -#include <mach/reset.h> #include <mach/idle.h> #include <mach/regs-s3c2443-clock.h> @@ -68,16 +67,20 @@ static struct map_desc s3c2416_iodesc[] __initdata = { IODESC_ENT(TIMER), }; -struct sysdev_class s3c2416_sysclass = { +struct bus_type s3c2416_subsys = { .name = "s3c2416-core", + .dev_name = "s3c2416-core", }; -static struct sys_device s3c2416_sysdev = { - .cls = &s3c2416_sysclass, +static struct device s3c2416_dev = { + .bus = &s3c2416_subsys, }; -static void s3c2416_hard_reset(void) +void s3c2416_restart(char mode, const char *cmd) { + if (mode == 's') + soft_restart(0); + __raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST); } @@ -85,7 +88,6 @@ int __init s3c2416_init(void) { printk(KERN_INFO "S3C2416: Initializing architecture\n"); - s3c24xx_reset_hook = s3c2416_hard_reset; /* s3c24xx_idle = s3c2416_idle; */ /* change WDT IRQ number */ @@ -105,7 +107,7 @@ int __init s3c2416_init(void) #endif register_syscore_ops(&s3c24xx_irq_syscore_ops); - return sysdev_register(&s3c2416_sysdev); + return device_register(&s3c2416_dev); } void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no) @@ -133,7 +135,7 @@ void __init s3c2416_map_io(void) iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc)); } -/* need to register class before we actually register the device, and +/* need to register the subsystem before we actually register the device, and * we also need to ensure that it has been initialised before any of the * drivers even try to use it (even if not on an s3c2416 based system) * as a driver which may support both 2443 and 2440 may try and use it. @@ -141,7 +143,7 @@ void __init s3c2416_map_io(void) static int __init s3c2416_core_init(void) { - return sysdev_class_register(&s3c2416_sysclass); + return subsys_system_register(&s3c2416_subsys, NULL); } core_initcall(s3c2416_core_init); diff --git a/arch/arm/mach-s3c2416/setup-sdhci.c b/arch/arm/mach-s3c2416/setup-sdhci.c deleted file mode 100644 index cee53955eb02..000000000000 --- a/arch/arm/mach-s3c2416/setup-sdhci.c +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/arch/arm/mach-s3c2416/setup-sdhci.c - * - * Copyright 2010 Promwad Innovation Company - * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> - * - * S3C2416 - Helper functions for settign up SDHCI device(s) (HSMMC) - * - * Based on mach-s3c64xx/setup-sdhci.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/types.h> - -/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ - -char *s3c2416_hsmmc_clksrcs[4] = { - [0] = "hsmmc", - [1] = "hsmmc", - [2] = "hsmmc-if", - /* [3] = "48m", - note not successfully used yet */ -}; diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c index f9e6bdaf41d2..bedbc87a3426 100644 --- a/arch/arm/mach-s3c2440/clock.c +++ b/arch/arm/mach-s3c2440/clock.c @@ -28,12 +28,12 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/device.h> -#include <linux/sysdev.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/mutex.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/serial_core.h> #include <mach/hardware.h> #include <linux/atomic.h> @@ -43,6 +43,7 @@ #include <plat/clock.h> #include <plat/cpu.h> +#include <plat/regs-serial.h> /* S3C2440 extended clock support */ @@ -108,7 +109,47 @@ static struct clk s3c2440_clk_ac97 = { .ctrlbit = S3C2440_CLKCON_CAMERA, }; -static int s3c2440_clk_add(struct sys_device *sysdev) +static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) +{ + unsigned long ucon0, ucon1, ucon2, divisor; + + /* the fun of calculating the uart divisors on the s3c2440 */ + ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); + ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); + ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); + + ucon0 &= S3C2440_UCON0_DIVMASK; + ucon1 &= S3C2440_UCON1_DIVMASK; + ucon2 &= S3C2440_UCON2_DIVMASK; + + if (ucon0 != 0) + divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6; + else if (ucon1 != 0) + divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21; + else if (ucon2 != 0) + divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36; + else + /* manual calims 44, seems to be 9 */ + divisor = 9; + + return clk_get_rate(clk->parent) / divisor; +} + +static struct clk s3c2440_clk_fclk_n = { + .name = "fclk_n", + .parent = &clk_f, + .ops = &(struct clk_ops) { + .get_rate = s3c2440_fclk_n_getrate, + }, +}; + +static struct clk_lookup s3c2440_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), +}; + +static int s3c2440_clk_add(struct device *dev) { struct clk *clock_upll; struct clk *clock_h; @@ -126,10 +167,12 @@ static int s3c2440_clk_add(struct sys_device *sysdev) s3c2440_clk_cam.parent = clock_h; s3c2440_clk_ac97.parent = clock_p; s3c2440_clk_cam_upll.parent = clock_upll; + s3c24xx_register_clock(&s3c2440_clk_fclk_n); s3c24xx_register_clock(&s3c2440_clk_ac97); s3c24xx_register_clock(&s3c2440_clk_cam); s3c24xx_register_clock(&s3c2440_clk_cam_upll); + clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup)); clk_disable(&s3c2440_clk_ac97); clk_disable(&s3c2440_clk_cam); @@ -137,13 +180,15 @@ static int s3c2440_clk_add(struct sys_device *sysdev) return 0; } -static struct sysdev_driver s3c2440_clk_driver = { - .add = s3c2440_clk_add, +static struct subsys_interface s3c2440_clk_interface = { + .name = "s3c2440_clk", + .subsys = &s3c2440_subsys, + .add_dev = s3c2440_clk_add, }; -static __init int s3c24xx_clk_driver(void) +static __init int s3c24xx_clk_init(void) { - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver); + return subsys_interface_register(&s3c2440_clk_interface); } -arch_initcall(s3c24xx_clk_driver); +arch_initcall(s3c24xx_clk_init); diff --git a/arch/arm/mach-s3c2440/common.h b/arch/arm/mach-s3c2440/common.h new file mode 100644 index 000000000000..db8a98ac68c5 --- /dev/null +++ b/arch/arm/mach-s3c2440/common.h @@ -0,0 +1,17 @@ +/* + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Common Header for S3C2440 machines + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H +#define __ARCH_ARM_MACH_S3C2440_COMMON_H + +void s3c2440_restart(char mode, const char *cmd); + +#endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */ diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index 0e73f8f9d132..15b1ddf8f626 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -14,7 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/serial_core.h> #include <mach/map.h> @@ -174,20 +174,22 @@ static struct s3c24xx_dma_order __initdata s3c2440_dma_order = { }, }; -static int __init s3c2440_dma_add(struct sys_device *sysdev) +static int __init s3c2440_dma_add(struct device *dev) { s3c2410_dma_init(); s3c24xx_dma_order_set(&s3c2440_dma_order); return s3c24xx_dma_init_map(&s3c2440_dma_sel); } -static struct sysdev_driver s3c2440_dma_driver = { - .add = s3c2440_dma_add, +static struct subsys_interface s3c2440_dma_interface = { + .name = "s3c2440_dma", + .subsys = &s3c2440_subsys, + .add_dev = s3c2440_dma_add, }; static int __init s3c2440_dma_init(void) { - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_dma_driver); + return subsys_interface_register(&s3c2440_dma_interface); } arch_initcall(s3c2440_dma_init); diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c index eb1cc0f0705e..4fee9bc6bcb5 100644 --- a/arch/arm/mach-s3c2440/irq.c +++ b/arch/arm/mach-s3c2440/irq.c @@ -23,7 +23,7 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/ioport.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/io.h> #include <mach/hardware.h> @@ -92,7 +92,7 @@ static struct irq_chip s3c_irq_wdtac97 = { .irq_ack = s3c_irq_wdtac97_ack, }; -static int s3c2440_irq_add(struct sys_device *sysdev) +static int s3c2440_irq_add(struct device *dev) { unsigned int irqno; @@ -113,13 +113,15 @@ static int s3c2440_irq_add(struct sys_device *sysdev) return 0; } -static struct sysdev_driver s3c2440_irq_driver = { - .add = s3c2440_irq_add, +static struct subsys_interface s3c2440_irq_interface = { + .name = "s3c2440_irq", + .subsys = &s3c2440_subsys, + .add_dev = s3c2440_irq_add, }; static int s3c2440_irq_init(void) { - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver); + return subsys_interface_register(&s3c2440_irq_interface); } arch_initcall(s3c2440_irq_init); diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 74f92fc3fd04..24569550de1a 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -55,6 +55,8 @@ #include <plat/cpu.h> #include <plat/audio-simtec.h> +#include "common.h" + #define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics" static struct map_desc anubis_iodesc[] __initdata = { @@ -96,22 +98,6 @@ static struct map_desc anubis_iodesc[] __initdata = { #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE -static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = { - [0] = { - .name = "uclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - } -}; - - static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = { [0] = { .hwport = 0, @@ -119,8 +105,7 @@ static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = anubis_serial_clocks, - .clocks_size = ARRAY_SIZE(anubis_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, }, [1] = { .hwport = 2, @@ -128,8 +113,7 @@ static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = anubis_serial_clocks, - .clocks_size = ARRAY_SIZE(anubis_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, }, }; @@ -503,4 +487,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis") .init_machine = anubis_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, + .restart = s3c2440_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index 38887ee0c784..d6a9763110cd 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -49,6 +49,8 @@ #include <plat/cpu.h> #include <plat/mci.h> +#include "common.h" + static struct map_desc at2440evb_iodesc[] __initdata = { /* Nothing here */ }; @@ -57,22 +59,6 @@ static struct map_desc at2440evb_iodesc[] __initdata = { #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) -static struct s3c24xx_uart_clksrc at2440evb_serial_clocks[] = { - [0] = { - .name = "uclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - } -}; - - static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = { [0] = { .hwport = 0, @@ -80,8 +66,7 @@ static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = at2440evb_serial_clocks, - .clocks_size = ARRAY_SIZE(at2440evb_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, }, [1] = { .hwport = 1, @@ -89,8 +74,7 @@ static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = at2440evb_serial_clocks, - .clocks_size = ARRAY_SIZE(at2440evb_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, }, }; @@ -238,4 +222,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB") .init_machine = at2440evb_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, + .restart = s3c2440_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index de1e0ff46cec..5859e609d28c 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -90,6 +90,7 @@ #include <plat/iic.h> #include <plat/ts.h> +#include "common.h" static struct pcf50633 *gta02_pcf; @@ -600,4 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02") .init_irq = s3c24xx_init_irq, .init_machine = gta02_machine_init, .timer = &s3c24xx_timer, + .restart = s3c2440_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index 91fe0b4c95f1..adbbb85bc4cd 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -60,6 +60,8 @@ #include <sound/s3c24xx_uda134x.h> +#include "common.h" + #define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300) static struct map_desc mini2440_iodesc[] __initdata = { @@ -167,6 +169,24 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { .lcdcon5 = (S3C2410_LCDCON5_FRM565 | S3C2410_LCDCON5_HWSWP), }, + /* mini2440 + 3.5" TFT (LCD-W35i, LQ035Q1DG06 type) + touchscreen*/ + [3] = { + _LCD_DECLARE( + /* clock */ + 7, + /* xres, margin_right, margin_left, hsync */ + 320, 68, 66, 4, + /* yres, margin_top, margin_bottom, vsync */ + 240, 4, 4, 9, + /* refresh rate */ + 60), + .lcdcon5 = (S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVDEN | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVCLK | + S3C2410_LCDCON5_HWSWP), + }, }; /* todo - put into gpio header */ @@ -681,4 +701,5 @@ MACHINE_START(MINI2440, "MINI2440") .init_machine = mini2440_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, + .restart = s3c2440_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index 61c0bf148165..40eaf844bc1f 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -47,6 +47,8 @@ #include <plat/devs.h> #include <plat/cpu.h> +#include "common.h" + static struct map_desc nexcoder_iodesc[] __initdata = { /* nothing here yet */ }; @@ -156,4 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") .init_machine = nexcoder_init, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, + .restart = s3c2440_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index dc142ebf8cba..4c480ef734f6 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -54,6 +54,8 @@ #include <plat/devs.h> #include <plat/cpu.h> +#include "common.h" + /* onboard perihperal map */ static struct map_desc osiris_iodesc[] __initdata = { @@ -100,21 +102,6 @@ static struct map_desc osiris_iodesc[] __initdata = { #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE -static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = { - [0] = { - .name = "uclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - } -}; - static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = { [0] = { .hwport = 0, @@ -122,8 +109,7 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = osiris_serial_clocks, - .clocks_size = ARRAY_SIZE(osiris_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, }, [1] = { .hwport = 1, @@ -131,8 +117,7 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = osiris_serial_clocks, - .clocks_size = ARRAY_SIZE(osiris_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, }, [2] = { .hwport = 2, @@ -140,8 +125,7 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = osiris_serial_clocks, - .clocks_size = ARRAY_SIZE(osiris_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, } }; @@ -452,4 +436,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") .init_irq = s3c24xx_init_irq, .init_machine = osiris_init, .timer = &s3c24xx_timer, + .restart = s3c2440_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index 0d3453bf567c..80077f6472ee 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -24,7 +24,7 @@ #include <linux/serial_core.h> #include <linux/input.h> #include <linux/gpio_keys.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/pda_power.h> #include <linux/pwm_backlight.h> #include <linux/pwm.h> @@ -62,21 +62,14 @@ #include <sound/uda1380.h> +#include "common.h" + #define LCD_PWM_PERIOD 192960 #define LCD_PWM_DUTY 127353 static struct map_desc rx1950_iodesc[] __initdata = { }; -static struct s3c24xx_uart_clksrc rx1950_serial_clocks[] = { - [0] = { - .name = "fclk", - .divisor = 0x0a, - .min_baud = 0, - .max_baud = 0, - }, -}; - static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = { [0] = { .hwport = 0, @@ -84,8 +77,7 @@ static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = { .ucon = 0x3c5, .ulcon = 0x03, .ufcon = 0x51, - .clocks = rx1950_serial_clocks, - .clocks_size = ARRAY_SIZE(rx1950_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL3, }, [1] = { .hwport = 1, @@ -93,8 +85,7 @@ static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = { .ucon = 0x3c5, .ulcon = 0x03, .ufcon = 0x51, - .clocks = rx1950_serial_clocks, - .clocks_size = ARRAY_SIZE(rx1950_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL3, }, /* IR port */ [2] = { @@ -103,8 +94,7 @@ static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = { .ucon = 0x3c5, .ulcon = 0x43, .ufcon = 0xf1, - .clocks = rx1950_serial_clocks, - .clocks_size = ARRAY_SIZE(rx1950_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL3, }, }; @@ -832,4 +822,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950") .init_irq = s3c24xx_init_irq, .init_machine = rx1950_init_machine, .timer = &s3c24xx_timer, + .restart = s3c2440_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index e19499c2f909..20103bafbd4b 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -20,7 +20,7 @@ #include <linux/init.h> #include <linux/tty.h> #include <linux/console.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/platform_device.h> #include <linux/serial_core.h> #include <linux/serial.h> @@ -51,6 +51,8 @@ #include <plat/cpu.h> #include <plat/pm.h> +#include "common.h" + static struct map_desc rx3715_iodesc[] __initdata = { /* dump ISA space somewhere unused */ @@ -67,16 +69,6 @@ static struct map_desc rx3715_iodesc[] __initdata = { }, }; - -static struct s3c24xx_uart_clksrc rx3715_serial_clocks[] = { - [0] = { - .name = "fclk", - .divisor = 0, - .min_baud = 0, - .max_baud = 0, - } -}; - static struct s3c2410_uartcfg rx3715_uartcfgs[] = { [0] = { .hwport = 0, @@ -84,8 +76,7 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = { .ucon = 0x3c5, .ulcon = 0x03, .ufcon = 0x51, - .clocks = rx3715_serial_clocks, - .clocks_size = ARRAY_SIZE(rx3715_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL3, }, [1] = { .hwport = 1, @@ -93,8 +84,7 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = { .ucon = 0x3c5, .ulcon = 0x03, .ufcon = 0x00, - .clocks = rx3715_serial_clocks, - .clocks_size = ARRAY_SIZE(rx3715_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL3, }, /* IR port */ [2] = { @@ -103,8 +93,7 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = { .ucon = 0x3c5, .ulcon = 0x43, .ufcon = 0x51, - .clocks = rx3715_serial_clocks, - .clocks_size = ARRAY_SIZE(rx3715_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL3, } }; @@ -224,4 +213,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .init_irq = rx3715_init_irq, .init_machine = rx3715_init_machine, .timer = &s3c24xx_timer, + .restart = s3c2440_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index 36eeb4197a84..1deb60d12a60 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -47,6 +47,8 @@ #include <plat/common-smdk.h> +#include "common.h" + static struct map_desc smdk2440_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ @@ -181,4 +183,5 @@ MACHINE_START(S3C2440, "SMDK2440") .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, .timer = &s3c24xx_timer, + .restart = s3c2440_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c index 976002fb1b8f..cf7596694efe 100644 --- a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c +++ b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c @@ -17,7 +17,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/cpufreq.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/delay.h> #include <linux/clk.h> #include <linux/err.h> @@ -270,7 +270,7 @@ struct s3c_cpufreq_info s3c2440_cpufreq_info = { .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), }; -static int s3c2440_cpufreq_add(struct sys_device *sysdev) +static int s3c2440_cpufreq_add(struct device *dev) { xtal = s3c_cpufreq_clk_get(NULL, "xtal"); hclk = s3c_cpufreq_clk_get(NULL, "hclk"); @@ -285,27 +285,29 @@ static int s3c2440_cpufreq_add(struct sys_device *sysdev) return s3c_cpufreq_register(&s3c2440_cpufreq_info); } -static struct sysdev_driver s3c2440_cpufreq_driver = { - .add = s3c2440_cpufreq_add, +static struct subsys_interface s3c2440_cpufreq_interface = { + .name = "s3c2440_cpufreq", + .subsys = &s3c2440_subsys, + .add_dev = s3c2440_cpufreq_add, }; static int s3c2440_cpufreq_init(void) { - return sysdev_driver_register(&s3c2440_sysclass, - &s3c2440_cpufreq_driver); + return subsys_interface_register(&s3c2440_cpufreq_interface); } /* arch_initcall adds the clocks we need, so use subsys_initcall. */ subsys_initcall(s3c2440_cpufreq_init); -static struct sysdev_driver s3c2442_cpufreq_driver = { - .add = s3c2440_cpufreq_add, +static struct subsys_interface s3c2442_cpufreq_interface = { + .name = "s3c2442_cpufreq", + .subsys = &s3c2442_subsys, + .add_dev = s3c2440_cpufreq_add, }; static int s3c2442_cpufreq_init(void) { - return sysdev_driver_register(&s3c2442_sysclass, - &s3c2442_cpufreq_driver); + return subsys_interface_register(&s3c2442_cpufreq_interface); } subsys_initcall(s3c2442_cpufreq_init); diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c index f105d5e8c477..b5368ae8d7fe 100644 --- a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c +++ b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c @@ -14,7 +14,7 @@ #include <linux/types.h> #include <linux/kernel.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/clk.h> #include <linux/err.h> @@ -51,7 +51,7 @@ static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = { { .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */ }; -static int s3c2440_plls12_add(struct sys_device *dev) +static int s3c2440_plls12_add(struct device *dev) { struct clk *xtal_clk; unsigned long xtal; @@ -72,25 +72,29 @@ static int s3c2440_plls12_add(struct sys_device *dev) return 0; } -static struct sysdev_driver s3c2440_plls12_drv = { - .add = s3c2440_plls12_add, +static struct subsys_interface s3c2440_plls12_interface = { + .name = "s3c2440_plls12", + .subsys = &s3c2440_subsys, + .add_dev = s3c2440_plls12_add, }; static int __init s3c2440_pll_12mhz(void) { - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_plls12_drv); + return subsys_interface_register(&s3c2440_plls12_interface); } arch_initcall(s3c2440_pll_12mhz); -static struct sysdev_driver s3c2442_plls12_drv = { - .add = s3c2440_plls12_add, +static struct subsys_interface s3c2442_plls12_interface = { + .name = "s3c2442_plls12", + .subsys = &s3c2442_subsys, + .add_dev = s3c2440_plls12_add, }; static int __init s3c2442_pll_12mhz(void) { - return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_plls12_drv); + return subsys_interface_register(&s3c2442_plls12_interface); } diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c index c8a8f90ef382..42f2b5cd2399 100644 --- a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c +++ b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c @@ -14,7 +14,7 @@ #include <linux/types.h> #include <linux/kernel.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/clk.h> #include <linux/err.h> @@ -79,7 +79,7 @@ static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = { { .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */ }; -static int s3c2440_plls169344_add(struct sys_device *dev) +static int s3c2440_plls169344_add(struct device *dev) { struct clk *xtal_clk; unsigned long xtal; @@ -100,28 +100,28 @@ static int s3c2440_plls169344_add(struct sys_device *dev) return 0; } -static struct sysdev_driver s3c2440_plls169344_drv = { - .add = s3c2440_plls169344_add, +static struct subsys_interface s3c2440_plls169344_interface = { + .name = "s3c2440_plls169344", + .subsys = &s3c2440_subsys, + .add_dev = s3c2440_plls169344_add, }; static int __init s3c2440_pll_16934400(void) { - return sysdev_driver_register(&s3c2440_sysclass, - &s3c2440_plls169344_drv); - + return subsys_interface_register(&s3c2440_plls169344_interface); } arch_initcall(s3c2440_pll_16934400); -static struct sysdev_driver s3c2442_plls169344_drv = { - .add = s3c2440_plls169344_add, +static struct subsys_interface s3c2442_plls169344_interface = { + .name = "s3c2442_plls169344", + .subsys = &s3c2442_subsys, + .add_dev = s3c2440_plls169344_add, }; static int __init s3c2442_pll_16934400(void) { - return sysdev_driver_register(&s3c2442_sysclass, - &s3c2442_plls169344_drv); - + return subsys_interface_register(&s3c2442_plls169344_interface); } arch_initcall(s3c2442_pll_16934400); diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index 37f8cc6aabd4..517623a09fc5 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -18,7 +18,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/serial_core.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/gpio.h> #include <linux/clk.h> @@ -35,13 +35,14 @@ #include <plat/cpu.h> #include <plat/s3c244x.h> #include <plat/pm.h> +#include <plat/watchdog-reset.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> -static struct sys_device s3c2440_sysdev = { - .cls = &s3c2440_sysclass, +static struct device s3c2440_dev = { + .bus = &s3c2440_subsys, }; int __init s3c2440_init(void) @@ -63,7 +64,7 @@ int __init s3c2440_init(void) /* register our system device for everything else */ - return sysdev_register(&s3c2440_sysdev); + return device_register(&s3c2440_dev); } void __init s3c2440_map_io(void) @@ -73,3 +74,15 @@ void __init s3c2440_map_io(void) s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up; s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up; } + +void s3c2440_restart(char mode, const char *cmd) +{ + if (mode == 's') { + soft_restart(0); + } + + arch_wdt_reset(); + + /* we'll take a jump through zero as a poor second */ + soft_restart(0); +} diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c index 2c822e09392f..8004e0497bf4 100644 --- a/arch/arm/mach-s3c2440/s3c2442.c +++ b/arch/arm/mach-s3c2440/s3c2442.c @@ -28,7 +28,6 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/device.h> -#include <linux/sysdev.h> #include <linux/syscore_ops.h> #include <linux/interrupt.h> #include <linux/ioport.h> @@ -123,7 +122,7 @@ static struct clk s3c2442_clk_cam_upll = { }, }; -static int s3c2442_clk_add(struct sys_device *sysdev) +static int s3c2442_clk_add(struct device *dev) { struct clk *clock_upll; struct clk *clock_h; @@ -149,20 +148,22 @@ static int s3c2442_clk_add(struct sys_device *sysdev) return 0; } -static struct sysdev_driver s3c2442_clk_driver = { - .add = s3c2442_clk_add, +static struct subsys_interface s3c2442_clk_interface = { + .name = "s3c2442_clk", + .subsys = &s3c2442_subsys, + .add_dev = s3c2442_clk_add, }; static __init int s3c2442_clk_init(void) { - return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver); + return subsys_interface_register(&s3c2442_clk_interface); } arch_initcall(s3c2442_clk_init); -static struct sys_device s3c2442_sysdev = { - .cls = &s3c2442_sysclass, +static struct device s3c2442_dev = { + .bus = &s3c2442_subsys, }; int __init s3c2442_init(void) @@ -175,7 +176,7 @@ int __init s3c2442_init(void) register_syscore_ops(&s3c244x_pm_syscore_ops); register_syscore_ops(&s3c24xx_irq_syscore_ops); - return sysdev_register(&s3c2442_sysdev); + return device_register(&s3c2442_dev); } void __init s3c2442_map_io(void) diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c index 7f5ea0a169a5..b3fdbdda3d5f 100644 --- a/arch/arm/mach-s3c2440/s3c244x-clock.c +++ b/arch/arm/mach-s3c2440/s3c244x-clock.c @@ -28,7 +28,6 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/device.h> -#include <linux/sysdev.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/clk.h> @@ -73,7 +72,7 @@ static struct clk clk_arm = { }, }; -static int s3c244x_clk_add(struct sys_device *sysdev) +static int s3c244x_clk_add(struct device *dev) { unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); unsigned long clkdivn; @@ -115,24 +114,28 @@ static int s3c244x_clk_add(struct sys_device *sysdev) return 0; } -static struct sysdev_driver s3c2440_clk_driver = { - .add = s3c244x_clk_add, +static struct subsys_interface s3c2440_clk_interface = { + .name = "s3c2440_clk", + .subsys = &s3c2440_subsys, + .add_dev = s3c244x_clk_add, }; static int s3c2440_clk_init(void) { - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver); + return subsys_interface_register(&s3c2440_clk_interface); } arch_initcall(s3c2440_clk_init); -static struct sysdev_driver s3c2442_clk_driver = { - .add = s3c244x_clk_add, +static struct subsys_interface s3c2442_clk_interface = { + .name = "s3c2442_clk", + .subsys = &s3c2442_subsys, + .add_dev = s3c244x_clk_add, }; static int s3c2442_clk_init(void) { - return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver); + return subsys_interface_register(&s3c2442_clk_interface); } arch_initcall(s3c2442_clk_init); diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c index c63e8f26d901..74d3dcf46a48 100644 --- a/arch/arm/mach-s3c2440/s3c244x-irq.c +++ b/arch/arm/mach-s3c2440/s3c244x-irq.c @@ -23,7 +23,7 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/ioport.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/io.h> #include <mach/hardware.h> @@ -91,7 +91,7 @@ static struct irq_chip s3c_irq_cam = { .irq_ack = s3c_irq_cam_ack, }; -static int s3c244x_irq_add(struct sys_device *sysdev) +static int s3c244x_irq_add(struct device *dev) { unsigned int irqno; @@ -114,25 +114,29 @@ static int s3c244x_irq_add(struct sys_device *sysdev) return 0; } -static struct sysdev_driver s3c2440_irq_driver = { - .add = s3c244x_irq_add, +static struct subsys_interface s3c2440_irq_interface = { + .name = "s3c2440_irq", + .subsys = &s3c2440_subsys, + .add_dev = s3c244x_irq_add, }; static int s3c2440_irq_init(void) { - return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver); + return subsys_interface_register(&s3c2440_irq_interface); } arch_initcall(s3c2440_irq_init); -static struct sysdev_driver s3c2442_irq_driver = { - .add = s3c244x_irq_add, +static struct subsys_interface s3c2442_irq_interface = { + .name = "s3c2442_irq", + .subsys = &s3c2442_subsys, + .add_dev = s3c244x_irq_add, }; static int s3c2442_irq_init(void) { - return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_irq_driver); + return subsys_interface_register(&s3c2442_irq_interface); } arch_initcall(s3c2442_irq_init); diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c index 7e8a23d2098a..36bc60f61d0a 100644 --- a/arch/arm/mach-s3c2440/s3c244x.c +++ b/arch/arm/mach-s3c2440/s3c244x.c @@ -18,7 +18,7 @@ #include <linux/init.h> #include <linux/serial_core.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/clk.h> #include <linux/io.h> @@ -135,17 +135,19 @@ void __init s3c244x_init_clocks(int xtal) s3c2410_baseclk_add(); } -/* Since the S3C2442 and S3C2440 share items, put both sysclasses here */ +/* Since the S3C2442 and S3C2440 share items, put both subsystems here */ -struct sysdev_class s3c2440_sysclass = { +struct bus_type s3c2440_subsys = { .name = "s3c2440-core", + .dev_name = "s3c2440-core", }; -struct sysdev_class s3c2442_sysclass = { +struct bus_type s3c2442_subsys = { .name = "s3c2442-core", + .dev_name = "s3c2442-core", }; -/* need to register class before we actually register the device, and +/* need to register the subsystem before we actually register the device, and * we also need to ensure that it has been initialised before any of the * drivers even try to use it (even if not on an s3c2440 based system) * as a driver which may support both 2410 and 2440 may try and use it. @@ -153,14 +155,14 @@ struct sysdev_class s3c2442_sysclass = { static int __init s3c2440_core_init(void) { - return sysdev_class_register(&s3c2440_sysclass); + return subsys_system_register(&s3c2440_subsys, NULL); } core_initcall(s3c2440_core_init); static int __init s3c2442_core_init(void) { - return sysdev_class_register(&s3c2442_sysclass); + return subsys_system_register(&s3c2442_subsys, NULL); } core_initcall(s3c2442_core_init); diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 1c2c088aa2e8..6dde2696f8f0 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -27,7 +27,7 @@ #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/clk.h> #include <linux/mutex.h> #include <linux/serial_core.h> diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index fe52151d2e84..de6b4a23c9ed 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -14,7 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/serial_core.h> #include <linux/io.h> @@ -135,19 +135,21 @@ static struct s3c24xx_dma_selection __initdata s3c2443_dma_sel = { .map_size = ARRAY_SIZE(s3c2443_dma_mappings), }; -static int __init s3c2443_dma_add(struct sys_device *sysdev) +static int __init s3c2443_dma_add(struct device *dev) { s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100); return s3c24xx_dma_init_map(&s3c2443_dma_sel); } -static struct sysdev_driver s3c2443_dma_driver = { - .add = s3c2443_dma_add, +static struct subsys_interface s3c2443_dma_interface = { + .name = "s3c2443_dma", + .subsys = &s3c2443_subsys, + .add_dev = s3c2443_dma_add, }; static int __init s3c2443_dma_init(void) { - return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_dma_driver); + return subsys_interface_register(&s3c2443_dma_interface); } arch_initcall(s3c2443_dma_init); diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c index 83ecb1173fb1..35e4ff24fb43 100644 --- a/arch/arm/mach-s3c2443/irq.c +++ b/arch/arm/mach-s3c2443/irq.c @@ -23,7 +23,7 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/ioport.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/io.h> #include <mach/hardware.h> @@ -241,7 +241,7 @@ static int __init s3c2443_add_sub(unsigned int base, return 0; } -static int __init s3c2443_irq_add(struct sys_device *sysdev) +static int __init s3c2443_irq_add(struct device *dev) { printk("S3C2443: IRQ Support\n"); @@ -265,13 +265,15 @@ static int __init s3c2443_irq_add(struct sys_device *sysdev) return 0; } -static struct sysdev_driver s3c2443_irq_driver = { - .add = s3c2443_irq_add, +static struct subsys_interface s3c2443_irq_interface = { + .name = "s3c2443_irq", + .subsys = &s3c2443_subsys, + .add_dev = s3c2443_irq_add, }; static int __init s3c2443_irq_init(void) { - return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_irq_driver); + return subsys_interface_register(&s3c2443_irq_interface); } arch_initcall(s3c2443_irq_init); diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c index bec107e00441..209236956222 100644 --- a/arch/arm/mach-s3c2443/mach-smdk2443.c +++ b/arch/arm/mach-s3c2443/mach-smdk2443.c @@ -145,4 +145,5 @@ MACHINE_START(SMDK2443, "SMDK2443") .map_io = smdk2443_map_io, .init_machine = smdk2443_machine_init, .timer = &s3c24xx_timer, + .restart = s3c2443_restart, MACHINE_END diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c index a22b771b0f36..b9deaeb0dfff 100644 --- a/arch/arm/mach-s3c2443/s3c2443.c +++ b/arch/arm/mach-s3c2443/s3c2443.c @@ -19,7 +19,7 @@ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/serial_core.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/clk.h> #include <linux/io.h> @@ -31,7 +31,6 @@ #include <asm/irq.h> #include <mach/regs-s3c2443-clock.h> -#include <mach/reset.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> @@ -49,16 +48,20 @@ static struct map_desc s3c2443_iodesc[] __initdata = { IODESC_ENT(TIMER), }; -struct sysdev_class s3c2443_sysclass = { +struct bus_type s3c2443_subsys = { .name = "s3c2443-core", + .dev_name = "s3c2443-core", }; -static struct sys_device s3c2443_sysdev = { - .cls = &s3c2443_sysclass, +static struct device s3c2443_dev = { + .bus = &s3c2443_subsys, }; -static void s3c2443_hard_reset(void) +void s3c2443_restart(char mode, const char *cmd) { + if (mode == 's') + soft_restart(0); + __raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST); } @@ -66,8 +69,6 @@ int __init s3c2443_init(void) { printk("S3C2443: Initialising architecture\n"); - s3c24xx_reset_hook = s3c2443_hard_reset; - s3c_nand_setname("s3c2412-nand"); s3c_fb_setname("s3c2443-fb"); @@ -77,7 +78,7 @@ int __init s3c2443_init(void) s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT; s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT; - return sysdev_register(&s3c2443_sysdev); + return device_register(&s3c2443_dev); } void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no) @@ -99,7 +100,7 @@ void __init s3c2443_map_io(void) iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); } -/* need to register class before we actually register the device, and +/* need to register the subsystem before we actually register the device, and * we also need to ensure that it has been initialised before any of the * drivers even try to use it (even if not on an s3c2443 based system) * as a driver which may support both 2443 and 2440 may try and use it. @@ -107,7 +108,7 @@ void __init s3c2443_map_io(void) static int __init s3c2443_core_init(void) { - return sysdev_class_register(&s3c2443_sysclass); + return subsys_system_register(&s3c2443_subsys, NULL); } core_initcall(s3c2443_core_init); diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 5552e048c2be..dd20c66cd700 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -8,6 +8,7 @@ config PLAT_S3C64XX bool depends on ARCH_S3C64XX select SAMSUNG_WAKEMASK + select PM_GENERIC_DOMAINS default y help Base platform code for any Samsung S3C64XX device @@ -77,6 +78,11 @@ config S3C64XX_SETUP_SDHCI_GPIO help Common setup code for S3C64XX SDHCI GPIO configurations +config S3C64XX_SETUP_SPI + bool + help + Common setup code for SPI GPIO configurations + # S36400 Macchine support config MACH_SMDK6400 @@ -188,7 +194,7 @@ config SMDK6410_WM1190_EV1 depends on MACH_SMDK6410 select REGULATOR select REGULATOR_WM8350 - select S3C24XX_GPIO_EXTRA64 + select SAMSUNG_GPIO_EXTRA64 select MFD_WM8350_I2C select MFD_WM8350_CONFIG_MODE_0 select MFD_WM8350_CONFIG_MODE_3 @@ -206,7 +212,7 @@ config SMDK6410_WM1192_EV1 depends on MACH_SMDK6410 select REGULATOR select REGULATOR_WM831X - select S3C24XX_GPIO_EXTRA64 + select SAMSUNG_GPIO_EXTRA64 select MFD_WM831X select MFD_WM831X_I2C help @@ -276,6 +282,7 @@ config MACH_WLF_CRAGG_6410 select S3C64XX_SETUP_IDE select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_KEYPAD + select S3C64XX_SETUP_SPI select SAMSUNG_DEV_ADC select SAMSUNG_DEV_KEYPAD select S3C_DEV_USB_HOST @@ -286,8 +293,8 @@ config MACH_WLF_CRAGG_6410 select S3C_DEV_I2C1 select S3C_DEV_WDT select S3C_DEV_RTC - select S3C64XX_DEV_SPI - select S3C24XX_GPIO_EXTRA128 + select S3C64XX_DEV_SPI0 + select SAMSUNG_GPIO_EXTRA128 select I2C help Machine support for the Wolfson Cragganmore S3C6410 variant. diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index cfc0b9941808..1822ac2eba31 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -10,54 +10,49 @@ obj-m := obj-n := obj- := -# Core files -obj-y += cpu.o -obj-y += clock.o +# Core -# Core support for S3C6400 system +obj-y += common.o clock.o + +# Core support obj-$(CONFIG_CPU_S3C6400) += s3c6400.o obj-$(CONFIG_CPU_S3C6410) += s3c6410.o -obj-y += irq.o -obj-y += irq-eint.o +# PM + +obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o # DMA support obj-$(CONFIG_S3C64XX_DMA) += dma.o -# Device setup +# Device support -obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o -obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o -obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o -obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o -obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o -obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o -obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o +obj-y += dev-uart.o +obj-y += dev-audio.o +obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o -# PM +# Device setup -obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_PM) += sleep.o -obj-$(CONFIG_PM) += irq-pm.o +obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o +obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o +obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o +obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o +obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o +obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi.o # Machine support -obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o -obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o -obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o -obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o -obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o -obj-$(CONFIG_MACH_NCP) += mach-ncp.o -obj-$(CONFIG_MACH_HMT) += mach-hmt.o -obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o -obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o -obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o -obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o - -# device support - -obj-y += dev-uart.o -obj-y += dev-audio.o -obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o +obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o +obj-$(CONFIG_MACH_HMT) += mach-hmt.o +obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o +obj-$(CONFIG_MACH_NCP) += mach-ncp.o +obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o +obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o +obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o +obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o +obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o +obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o +obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 39c238d7a3dc..31bb27dc4aeb 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -184,18 +184,6 @@ static struct clk init_clocks_off[] = { .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_SPI1, }, { - .name = "spi_48m", - .devname = "s3c64xx-spi.0", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SPI0_48, - }, { - .name = "spi_48m", - .devname = "s3c64xx-spi.1", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SPI1_48, - }, { .name = "48m", .devname = "s3c-sdhci.0", .parent = &clk_48m, @@ -226,6 +214,22 @@ static struct clk init_clocks_off[] = { }, }; +static struct clk clk_48m_spi0 = { + .name = "spi_48m", + .devname = "s3c64xx-spi.0", + .parent = &clk_48m, + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_SPI0_48, +}; + +static struct clk clk_48m_spi1 = { + .name = "spi_48m", + .devname = "s3c64xx-spi.1", + .parent = &clk_48m, + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_SPI1_48, +}; + static struct clk init_clocks[] = { { .name = "lcd", @@ -243,24 +247,6 @@ static struct clk init_clocks[] = { .enable = s3c64xx_hclk_ctrl, .ctrlbit = S3C_CLKCON_HCLK_UHOST, }, { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_HSMMC0, - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_HSMMC1, - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.2", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_HSMMC2, - }, { .name = "otg", .parent = &clk_h, .enable = s3c64xx_hclk_ctrl, @@ -310,6 +296,29 @@ static struct clk init_clocks[] = { } }; +static struct clk clk_hsmmc0 = { + .name = "hsmmc", + .devname = "s3c-sdhci.0", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_HSMMC0, +}; + +static struct clk clk_hsmmc1 = { + .name = "hsmmc", + .devname = "s3c-sdhci.1", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_HSMMC1, +}; + +static struct clk clk_hsmmc2 = { + .name = "hsmmc", + .devname = "s3c-sdhci.2", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_HSMMC2, +}; static struct clk clk_fout_apll = { .name = "fout_apll", @@ -578,36 +587,6 @@ static struct clksrc_sources clkset_camif = { static struct clksrc_clk clksrcs[] = { { .clk = { - .name = "mmc_bus", - .devname = "s3c-sdhci.0", - .ctrlbit = S3C_CLKCON_SCLK_MMC0, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4 }, - .sources = &clkset_spi_mmc, - }, { - .clk = { - .name = "mmc_bus", - .devname = "s3c-sdhci.1", - .ctrlbit = S3C_CLKCON_SCLK_MMC1, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4 }, - .sources = &clkset_spi_mmc, - }, { - .clk = { - .name = "mmc_bus", - .devname = "s3c-sdhci.2", - .ctrlbit = S3C_CLKCON_SCLK_MMC2, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4 }, - .sources = &clkset_spi_mmc, - }, { - .clk = { .name = "usb-bus-host", .ctrlbit = S3C_CLKCON_SCLK_UHOST, .enable = s3c64xx_sclk_ctrl, @@ -617,35 +596,6 @@ static struct clksrc_clk clksrcs[] = { .sources = &clkset_uhost, }, { .clk = { - .name = "uclk1", - .ctrlbit = S3C_CLKCON_SCLK_UART, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 }, - .sources = &clkset_uart, - }, { -/* Where does UCLK0 come from? */ - .clk = { - .name = "spi-bus", - .devname = "s3c64xx-spi.0", - .ctrlbit = S3C_CLKCON_SCLK_SPI0, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 }, - .sources = &clkset_spi_mmc, - }, { - .clk = { - .name = "spi-bus", - .devname = "s3c64xx-spi.1", - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 }, - .sources = &clkset_spi_mmc, - }, { - .clk = { .name = "audio-bus", .devname = "samsung-i2s.0", .ctrlbit = S3C_CLKCON_SCLK_AUDIO0, @@ -695,6 +645,78 @@ static struct clksrc_clk clksrcs[] = { }, }; +/* Where does UCLK0 come from? */ +static struct clksrc_clk clk_sclk_uclk = { + .clk = { + .name = "uclk1", + .ctrlbit = S3C_CLKCON_SCLK_UART, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 }, + .sources = &clkset_uart, +}; + +static struct clksrc_clk clk_sclk_mmc0 = { + .clk = { + .name = "mmc_bus", + .devname = "s3c-sdhci.0", + .ctrlbit = S3C_CLKCON_SCLK_MMC0, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4 }, + .sources = &clkset_spi_mmc, +}; + +static struct clksrc_clk clk_sclk_mmc1 = { + .clk = { + .name = "mmc_bus", + .devname = "s3c-sdhci.1", + .ctrlbit = S3C_CLKCON_SCLK_MMC1, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4 }, + .sources = &clkset_spi_mmc, +}; + +static struct clksrc_clk clk_sclk_mmc2 = { + .clk = { + .name = "mmc_bus", + .devname = "s3c-sdhci.2", + .ctrlbit = S3C_CLKCON_SCLK_MMC2, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4 }, + .sources = &clkset_spi_mmc, +}; + +static struct clksrc_clk clk_sclk_spi0 = { + .clk = { + .name = "spi-bus", + .devname = "s3c64xx-spi.0", + .ctrlbit = S3C_CLKCON_SCLK_SPI0, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 }, + .sources = &clkset_spi_mmc, +}; + +static struct clksrc_clk clk_sclk_spi1 = { + .clk = { + .name = "spi-bus", + .devname = "s3c64xx-spi.1", + .ctrlbit = S3C_CLKCON_SCLK_SPI1, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 }, + .sources = &clkset_spi_mmc, +}; + /* Clock initialisation code */ static struct clksrc_clk *init_parents[] = { @@ -703,9 +725,42 @@ static struct clksrc_clk *init_parents[] = { &clk_mout_mpll, }; +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uclk, + &clk_sclk_mmc0, + &clk_sclk_mmc1, + &clk_sclk_mmc2, + &clk_sclk_spi0, + &clk_sclk_spi1, +}; + +static struct clk *clk_cdev[] = { + &clk_hsmmc0, + &clk_hsmmc1, + &clk_hsmmc2, + &clk_48m_spi0, + &clk_48m_spi1, +}; + +static struct clk_lookup s3c64xx_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), + CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), + CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), + CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_48m_spi0), + CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), + CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_48m_spi1), +}; + #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) -void __init_or_cpufreq s3c6400_setup_clocks(void) +void __init_or_cpufreq s3c64xx_setup_clocks(void) { struct clk *xtal_clk; unsigned long xtal; @@ -804,13 +859,15 @@ static struct clk *clks[] __initdata = { * as ARMCLK as well as the necessary parent clocks. * * This call does not setup the clocks, which is left to the - * s3c6400_setup_clocks() call which may be needed by the cpufreq + * s3c64xx_setup_clocks() call which may be needed by the cpufreq * or resume code to re-set the clocks if the bootloader has changed * them. */ void __init s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_divlimit) { + unsigned int cnt; + armclk_mask = armclk_divlimit; s3c24xx_register_baseclocks(xtal); @@ -821,7 +878,15 @@ void __init s3c64xx_register_clocks(unsigned long xtal, s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); + for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++) + s3c_disable_clocks(clk_cdev[cnt], 1); + s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1)); s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++) + s3c_register_clksrc(clksrc_cdev[cnt], 1); + clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup)); + s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c new file mode 100644 index 000000000000..4a7394d4bd9e --- /dev/null +++ b/arch/arm/mach-s3c64xx/common.c @@ -0,0 +1,385 @@ +/* + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Common Codes for S3C64XX machines + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> +#include <linux/irq.h> +#include <linux/gpio.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/hardware/vic.h> + +#include <mach/map.h> +#include <mach/hardware.h> +#include <mach/regs-gpio.h> + +#include <plat/cpu.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/pm.h> +#include <plat/gpio-cfg.h> +#include <plat/irq-uart.h> +#include <plat/irq-vic-timer.h> +#include <plat/regs-irqtype.h> +#include <plat/regs-serial.h> +#include <plat/watchdog-reset.h> + +#include "common.h" + +/* uart registration process */ + +void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no); +} + +/* table of supported CPUs */ + +static const char name_s3c6400[] = "S3C6400"; +static const char name_s3c6410[] = "S3C6410"; + +static struct cpu_table cpu_ids[] __initdata = { + { + .idcode = S3C6400_CPU_ID, + .idmask = S3C64XX_CPU_MASK, + .map_io = s3c6400_map_io, + .init_clocks = s3c6400_init_clocks, + .init_uarts = s3c64xx_init_uarts, + .init = s3c6400_init, + .name = name_s3c6400, + }, { + .idcode = S3C6410_CPU_ID, + .idmask = S3C64XX_CPU_MASK, + .map_io = s3c6410_map_io, + .init_clocks = s3c6410_init_clocks, + .init_uarts = s3c64xx_init_uarts, + .init = s3c6410_init, + .name = name_s3c6410, + }, +}; + +/* minimal IO mapping */ + +/* see notes on uart map in arch/arm/mach-s3c64xx/include/mach/debug-macro.S */ +#define UART_OFFS (S3C_PA_UART & 0xfffff) + +static struct map_desc s3c_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_SYS, + .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_MEM, + .pfn = __phys_to_pfn(S3C64XX_PA_SROM), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)(S3C_VA_UART + UART_OFFS), + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S3C64XX_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S3C64XX_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_TIMER, + .pfn = __phys_to_pfn(S3C_PA_TIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C64XX_VA_GPIO, + .pfn = __phys_to_pfn(S3C64XX_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C64XX_VA_MODEM, + .pfn = __phys_to_pfn(S3C64XX_PA_MODEM), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_WATCHDOG, + .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_USB_HSPHY, + .pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY), + .length = SZ_1K, + .type = MT_DEVICE, + }, +}; + +static struct bus_type s3c64xx_subsys = { + .name = "s3c64xx-core", + .dev_name = "s3c64xx-core", +}; + +static struct device s3c64xx_dev = { + .bus = &s3c64xx_subsys, +}; + +/* read cpu identification code */ + +void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) +{ + /* initialise the io descriptors we need for initialisation */ + iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); + iotable_init(mach_desc, size); + init_consistent_dma_size(SZ_8M); + + /* detect cpu id */ + s3c64xx_init_cpu(); + + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); +} + +static __init int s3c64xx_dev_init(void) +{ + subsys_system_register(&s3c64xx_subsys, NULL); + return device_register(&s3c64xx_dev); +} +core_initcall(s3c64xx_dev_init); + +/* + * setup the sources the vic should advertise resume + * for, even though it is not doing the wake + * (set_irq_wake needs to be valid) + */ +#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE)) +#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \ + 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \ + 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \ + 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \ + 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE)) + +void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) +{ + printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); + + /* initialise the pair of VICs */ + vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME); + vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME); + + /* add the timer sub-irqs */ + s3c_init_vic_timer_irq(5, IRQ_TIMER0); +} + +#define eint_offset(irq) ((irq) - IRQ_EINT(0)) +#define eint_irq_to_bit(irq) ((u32)(1 << eint_offset(irq))) + +static inline void s3c_irq_eint_mask(struct irq_data *data) +{ + u32 mask; + + mask = __raw_readl(S3C64XX_EINT0MASK); + mask |= (u32)data->chip_data; + __raw_writel(mask, S3C64XX_EINT0MASK); +} + +static void s3c_irq_eint_unmask(struct irq_data *data) +{ + u32 mask; + + mask = __raw_readl(S3C64XX_EINT0MASK); + mask &= ~((u32)data->chip_data); + __raw_writel(mask, S3C64XX_EINT0MASK); +} + +static inline void s3c_irq_eint_ack(struct irq_data *data) +{ + __raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND); +} + +static void s3c_irq_eint_maskack(struct irq_data *data) +{ + /* compiler should in-line these */ + s3c_irq_eint_mask(data); + s3c_irq_eint_ack(data); +} + +static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type) +{ + int offs = eint_offset(data->irq); + int pin, pin_val; + int shift; + u32 ctrl, mask; + u32 newvalue = 0; + void __iomem *reg; + + if (offs > 27) + return -EINVAL; + + if (offs <= 15) + reg = S3C64XX_EINT0CON0; + else + reg = S3C64XX_EINT0CON1; + + switch (type) { + case IRQ_TYPE_NONE: + printk(KERN_WARNING "No edge setting!\n"); + break; + + case IRQ_TYPE_EDGE_RISING: + newvalue = S3C2410_EXTINT_RISEEDGE; + break; + + case IRQ_TYPE_EDGE_FALLING: + newvalue = S3C2410_EXTINT_FALLEDGE; + break; + + case IRQ_TYPE_EDGE_BOTH: + newvalue = S3C2410_EXTINT_BOTHEDGE; + break; + + case IRQ_TYPE_LEVEL_LOW: + newvalue = S3C2410_EXTINT_LOWLEV; + break; + + case IRQ_TYPE_LEVEL_HIGH: + newvalue = S3C2410_EXTINT_HILEV; + break; + + default: + printk(KERN_ERR "No such irq type %d", type); + return -1; + } + + if (offs <= 15) + shift = (offs / 2) * 4; + else + shift = ((offs - 16) / 2) * 4; + mask = 0x7 << shift; + + ctrl = __raw_readl(reg); + ctrl &= ~mask; + ctrl |= newvalue << shift; + __raw_writel(ctrl, reg); + + /* set the GPIO pin appropriately */ + + if (offs < 16) { + pin = S3C64XX_GPN(offs); + pin_val = S3C_GPIO_SFN(2); + } else if (offs < 23) { + pin = S3C64XX_GPL(offs + 8 - 16); + pin_val = S3C_GPIO_SFN(3); + } else { + pin = S3C64XX_GPM(offs - 23); + pin_val = S3C_GPIO_SFN(3); + } + + s3c_gpio_cfgpin(pin, pin_val); + + return 0; +} + +static struct irq_chip s3c_irq_eint = { + .name = "s3c-eint", + .irq_mask = s3c_irq_eint_mask, + .irq_unmask = s3c_irq_eint_unmask, + .irq_mask_ack = s3c_irq_eint_maskack, + .irq_ack = s3c_irq_eint_ack, + .irq_set_type = s3c_irq_eint_set_type, + .irq_set_wake = s3c_irqext_wake, +}; + +/* s3c_irq_demux_eint + * + * This function demuxes the IRQ from the group0 external interrupts, + * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into + * the specific handlers s3c_irq_demux_eintX_Y. + */ +static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end) +{ + u32 status = __raw_readl(S3C64XX_EINT0PEND); + u32 mask = __raw_readl(S3C64XX_EINT0MASK); + unsigned int irq; + + status &= ~mask; + status >>= start; + status &= (1 << (end - start + 1)) - 1; + + for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) { + if (status & 1) + generic_handle_irq(irq); + + status >>= 1; + } +} + +static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_eint(0, 3); +} + +static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_eint(4, 11); +} + +static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_eint(12, 19); +} + +static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_eint(20, 27); +} + +static int __init s3c64xx_init_irq_eint(void) +{ + int irq; + + for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) { + irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq); + irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq)); + set_irq_flags(irq, IRQF_VALID); + } + + irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3); + irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11); + irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19); + irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27); + + return 0; +} +arch_initcall(s3c64xx_init_irq_eint); + +void s3c64xx_restart(char mode, const char *cmd) +{ + if (mode != 's') + arch_wdt_reset(); + + /* if all else fails, or mode was for soft, jump to 0 */ + soft_restart(0); +} diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h new file mode 100644 index 000000000000..5eb9c9a7d73b --- /dev/null +++ b/arch/arm/mach-s3c64xx/common.h @@ -0,0 +1,56 @@ +/* + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Common Header for S3C64XX machines + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_S3C64XX_COMMON_H +#define __ARCH_ARM_MACH_S3C64XX_COMMON_H + +void s3c64xx_init_irq(u32 vic0, u32 vic1); +void s3c64xx_init_io(struct map_desc *mach_desc, int size); + +void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit); +void s3c64xx_setup_clocks(void); + +void s3c64xx_restart(char mode, const char *cmd); + +extern struct syscore_ops s3c64xx_irq_syscore_ops; + +#ifdef CONFIG_CPU_S3C6400 + +extern int s3c6400_init(void); +extern void s3c6400_init_irq(void); +extern void s3c6400_map_io(void); +extern void s3c6400_init_clocks(int xtal); + +#else +#define s3c6400_init_clocks NULL +#define s3c6400_map_io NULL +#define s3c6400_init NULL +#endif + +#ifdef CONFIG_CPU_S3C6410 + +extern int s3c6410_init(void); +extern void s3c6410_init_irq(void); +extern void s3c6410_map_io(void); +extern void s3c6410_init_clocks(int xtal); + +#else +#define s3c6410_init_clocks NULL +#define s3c6410_map_io NULL +#define s3c6410_init NULL +#endif + +#endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */ diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c deleted file mode 100644 index de085b798aa4..000000000000 --- a/arch/arm/mach-s3c64xx/cpu.c +++ /dev/null @@ -1,161 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/cpu.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX CPU Support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/sysdev.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/dma-mapping.h> - -#include <mach/hardware.h> -#include <mach/map.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <plat/regs-serial.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/clock.h> - -#include <plat/s3c6400.h> -#include <plat/s3c6410.h> - -/* table of supported CPUs */ - -static const char name_s3c6400[] = "S3C6400"; -static const char name_s3c6410[] = "S3C6410"; - -static struct cpu_table cpu_ids[] __initdata = { - { - .idcode = S3C6400_CPU_ID, - .idmask = S3C64XX_CPU_MASK, - .map_io = s3c6400_map_io, - .init_clocks = s3c6400_init_clocks, - .init_uarts = s3c6400_init_uarts, - .init = s3c6400_init, - .name = name_s3c6400, - }, { - .idcode = S3C6410_CPU_ID, - .idmask = S3C64XX_CPU_MASK, - .map_io = s3c6410_map_io, - .init_clocks = s3c6410_init_clocks, - .init_uarts = s3c6410_init_uarts, - .init = s3c6410_init, - .name = name_s3c6410, - }, -}; - -/* minimal IO mapping */ - -/* see notes on uart map in arch/arm/mach-s3c6400/include/mach/debug-macro.S */ -#define UART_OFFS (S3C_PA_UART & 0xfffff) - -static struct map_desc s3c_iodesc[] __initdata = { - { - .virtual = (unsigned long)S3C_VA_SYS, - .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_MEM, - .pfn = __phys_to_pfn(S3C64XX_PA_SROM), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)(S3C_VA_UART + UART_OFFS), - .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S3C64XX_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S3C64XX_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_TIMER, - .pfn = __phys_to_pfn(S3C_PA_TIMER), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C64XX_VA_GPIO, - .pfn = __phys_to_pfn(S3C64XX_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C64XX_VA_MODEM, - .pfn = __phys_to_pfn(S3C64XX_PA_MODEM), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_WATCHDOG, - .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_USB_HSPHY, - .pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY), - .length = SZ_1K, - .type = MT_DEVICE, - }, -}; - - -struct sysdev_class s3c64xx_sysclass = { - .name = "s3c64xx-core", -}; - -static struct sys_device s3c64xx_sysdev = { - .cls = &s3c64xx_sysclass, -}; - -/* uart registration process */ - -void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no); -} - -/* read cpu identification code */ - -void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) -{ - /* initialise the io descriptors we need for initialisation */ - iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); - iotable_init(mach_desc, size); - init_consistent_dma_size(SZ_8M); - - /* detect cpu id */ - s3c64xx_init_cpu(); - - s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); -} - -static __init int s3c64xx_sysdev_init(void) -{ - sysdev_class_register(&s3c64xx_sysclass); - return sysdev_register(&s3c64xx_sysdev); -} - -core_initcall(s3c64xx_sysdev_init); diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c deleted file mode 100644 index 5e6b42089eb4..000000000000 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ /dev/null @@ -1,179 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/dev-spi.c - * - * Copyright (C) 2009 Samsung Electronics Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <mach/dma.h> -#include <mach/map.h> -#include <mach/spi-clocks.h> -#include <mach/irqs.h> - -#include <plat/s3c64xx-spi.h> -#include <plat/gpio-cfg.h> -#include <plat/devs.h> - -static char *spi_src_clks[] = { - [S3C64XX_SPI_SRCCLK_PCLK] = "pclk", - [S3C64XX_SPI_SRCCLK_SPIBUS] = "spi-bus", - [S3C64XX_SPI_SRCCLK_48M] = "spi_48m", -}; - -/* SPI Controller platform_devices */ - -/* Since we emulate multi-cs capability, we do not touch the GPC-3,7. - * The emulated CS is toggled by board specific mechanism, as it can - * be either some immediate GPIO or some signal out of some other - * chip in between ... or some yet another way. - * We simply do not assume anything about CS. - */ -static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev) -{ - unsigned int base; - - switch (pdev->id) { - case 0: - base = S3C64XX_GPC(0); - break; - - case 1: - base = S3C64XX_GPC(4); - break; - - default: - dev_err(&pdev->dev, "Invalid SPI Controller number!"); - return -EINVAL; - } - - s3c_gpio_cfgall_range(base, 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - - return 0; -} - -static struct resource s3c64xx_spi0_resource[] = { - [0] = { - .start = S3C64XX_PA_SPI0, - .end = S3C64XX_PA_SPI0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI0_TX, - .end = DMACH_SPI0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI0_RX, - .end = DMACH_SPI0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI0, - .end = IRQ_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s3c64xx_spi0_pdata = { - .cfg_gpio = s3c64xx_spi_cfg_gpio, - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 13, - .tx_st_done = 21, -}; - -static u64 spi_dmamask = DMA_BIT_MASK(32); - -struct platform_device s3c64xx_device_spi0 = { - .name = "s3c64xx-spi", - .id = 0, - .num_resources = ARRAY_SIZE(s3c64xx_spi0_resource), - .resource = s3c64xx_spi0_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s3c64xx_spi0_pdata, - }, -}; -EXPORT_SYMBOL(s3c64xx_device_spi0); - -static struct resource s3c64xx_spi1_resource[] = { - [0] = { - .start = S3C64XX_PA_SPI1, - .end = S3C64XX_PA_SPI1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI1_TX, - .end = DMACH_SPI1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI1_RX, - .end = DMACH_SPI1_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI1, - .end = IRQ_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s3c64xx_spi1_pdata = { - .cfg_gpio = s3c64xx_spi_cfg_gpio, - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 13, - .tx_st_done = 21, -}; - -struct platform_device s3c64xx_device_spi1 = { - .name = "s3c64xx-spi", - .id = 1, - .num_resources = ARRAY_SIZE(s3c64xx_spi1_resource), - .resource = s3c64xx_spi1_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s3c64xx_spi1_pdata, - }, -}; -EXPORT_SYMBOL(s3c64xx_device_spi1); - -void __init s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) -{ - struct s3c64xx_spi_info *pd; - - /* Reject invalid configuration */ - if (!num_cs || src_clk_nr < 0 - || src_clk_nr > S3C64XX_SPI_SRCCLK_48M) { - printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); - return; - } - - switch (cntrlr) { - case 0: - pd = &s3c64xx_spi0_pdata; - break; - case 1: - pd = &s3c64xx_spi1_pdata; - break; - default: - printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", - __func__, cntrlr); - return; - } - - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - pd->src_clk_name = spi_src_clks[src_clk_nr]; -} diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index 17d62f4f8204..f2a7a1725596 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -16,7 +16,7 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/dmapool.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/errno.h> #include <linux/slab.h> #include <linux/delay.h> @@ -35,7 +35,7 @@ /* dma channel state information */ struct s3c64xx_dmac { - struct sys_device sysdev; + struct device dev; struct clk *clk; void __iomem *regs; struct s3c2410_dma_chan *channels; @@ -631,8 +631,9 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) return IRQ_HANDLED; } -static struct sysdev_class dma_sysclass = { +static struct bus_type dma_subsys = { .name = "s3c64xx-dma", + .dev_name = "s3c64xx-dma", }; static int s3c64xx_dma_init1(int chno, enum dma_ch chbase, @@ -651,12 +652,12 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase, return -ENOMEM; } - dmac->sysdev.id = chno / 8; - dmac->sysdev.cls = &dma_sysclass; + dmac->dev.id = chno / 8; + dmac->dev.bus = &dma_subsys; - err = sysdev_register(&dmac->sysdev); + err = device_register(&dmac->dev); if (err) { - printk(KERN_ERR "%s: failed to register sysdevice\n", __func__); + printk(KERN_ERR "%s: failed to register device\n", __func__); goto err_alloc; } @@ -667,7 +668,7 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase, goto err_dev; } - snprintf(clkname, sizeof(clkname), "dma%d", dmac->sysdev.id); + snprintf(clkname, sizeof(clkname), "dma%d", dmac->dev.id); dmac->clk = clk_get(NULL, clkname); if (IS_ERR(dmac->clk)) { @@ -715,7 +716,7 @@ err_clk: err_map: iounmap(regs); err_dev: - sysdev_unregister(&dmac->sysdev); + device_unregister(&dmac->dev); err_alloc: kfree(dmac); return err; @@ -733,9 +734,9 @@ static int __init s3c64xx_dma_init(void) return -ENOMEM; } - ret = sysdev_class_register(&dma_sysclass); + ret = subsys_system_register(&dma_subsys, NULL); if (ret) { - printk(KERN_ERR "%s: failed to create sysclass\n", __func__); + printk(KERN_ERR "%s: failed to create subsys\n", __func__); return -ENOMEM; } diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h index be9074e17dfd..5d55ab018b6b 100644 --- a/arch/arm/mach-s3c64xx/include/mach/crag6410.h +++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h @@ -15,9 +15,11 @@ #define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START #define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) +#define CODEC_IRQ_BASE (IRQ_BOARD_START + 128) #define PCA935X_GPIO_BASE GPIO_BOARD_START -#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) -#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16) +#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) +#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 32) +#define BANFF_PMIC_GPIO_BASE (GPIO_BOARD_START + 64) #endif diff --git a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S index dd362604dcce..dc2bc15142ce 100644 --- a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S +++ b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S @@ -12,7 +12,8 @@ * warranty of any kind, whether express or implied. */ -#include <mach/map.h> -#include <mach/irqs.h> + .macro disable_fiq + .endm -#include <asm/entry-macro-vic2.S> + .macro arch_ret_to_user, tmp1, tmp2 + .endm diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio.h index 6e34c2f6e670..8b540c42d5dd 100644 --- a/arch/arm/mach-s3c64xx/include/mach/gpio.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio.h @@ -88,6 +88,6 @@ enum s3c_gpio_number { /* define the number of gpios we need to the one after the GPQ() range */ #define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1) -#define BOARD_NR_GPIOS 16 +#define BOARD_NR_GPIOS (16 + CONFIG_SAMSUNG_GPIO_EXTRA) #define ARCH_NR_GPIOS (GPIO_BOARD_START + BOARD_NR_GPIOS) diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h index 443f85b3c203..96d60e0d9372 100644 --- a/arch/arm/mach-s3c64xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h @@ -169,7 +169,7 @@ #define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) #ifdef CONFIG_MACH_WLF_CRAGG_6410 -#define IRQ_BOARD_NR 128 +#define IRQ_BOARD_NR 160 #elif defined(CONFIG_SMDK6410_WM1190_EV1) #define IRQ_BOARD_NR 64 #elif defined(CONFIG_SMDK6410_WM1192_EV1) diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h index 23a1d71e4d53..8e2097bb208a 100644 --- a/arch/arm/mach-s3c64xx/include/mach/map.h +++ b/arch/arm/mach-s3c64xx/include/mach/map.h @@ -115,6 +115,8 @@ #define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG #define S3C_PA_RTC S3C64XX_PA_RTC #define S3C_PA_WDT S3C64XX_PA_WATCHDOG +#define S3C_PA_SPI0 S3C64XX_PA_SPI0 +#define S3C_PA_SPI1 S3C64XX_PA_SPI1 #define SAMSUNG_PA_ADC S3C64XX_PA_ADC #define SAMSUNG_PA_CFCON S3C64XX_PA_CFCON diff --git a/arch/arm/mach-s3c64xx/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h index 2e58cb7a7147..353ed4389ae7 100644 --- a/arch/arm/mach-s3c64xx/include/mach/system.h +++ b/arch/arm/mach-s3c64xx/include/mach/system.h @@ -11,20 +11,9 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H __FILE__ -#include <plat/watchdog-reset.h> - static void arch_idle(void) { /* nothing here yet */ } -static void arch_reset(char mode, const char *cmd) -{ - if (mode != 's') - arch_wdt_reset(); - - /* if all else fails, or mode was for soft, jump to 0 */ - cpu_reset(0); -} - #endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h deleted file mode 100644 index 23f75e556a30..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* arch/arm/mach-s3c64xx/include/mach/vmalloc.h - * - * from arch/arm/mach-iop3xx/include/mach/vmalloc.h - * - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C6400 vmalloc definition -*/ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END 0xF6000000UL - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s3c64xx/irq-eint.c b/arch/arm/mach-s3c64xx/irq-eint.c deleted file mode 100644 index 4d203be1f4c3..000000000000 --- a/arch/arm/mach-s3c64xx/irq-eint.c +++ /dev/null @@ -1,213 +0,0 @@ -/* arch/arm/plat-s3c64xx/irq-eint.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - Interrupt handling for IRQ_EINT(x) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/sysdev.h> -#include <linux/gpio.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <asm/hardware/vic.h> - -#include <plat/regs-irqtype.h> -#include <mach/regs-gpio.h> -#include <plat/gpio-cfg.h> - -#include <mach/map.h> -#include <plat/cpu.h> -#include <plat/pm.h> - -#define eint_offset(irq) ((irq) - IRQ_EINT(0)) -#define eint_irq_to_bit(irq) ((u32)(1 << eint_offset(irq))) - -static inline void s3c_irq_eint_mask(struct irq_data *data) -{ - u32 mask; - - mask = __raw_readl(S3C64XX_EINT0MASK); - mask |= (u32)data->chip_data; - __raw_writel(mask, S3C64XX_EINT0MASK); -} - -static void s3c_irq_eint_unmask(struct irq_data *data) -{ - u32 mask; - - mask = __raw_readl(S3C64XX_EINT0MASK); - mask &= ~((u32)data->chip_data); - __raw_writel(mask, S3C64XX_EINT0MASK); -} - -static inline void s3c_irq_eint_ack(struct irq_data *data) -{ - __raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND); -} - -static void s3c_irq_eint_maskack(struct irq_data *data) -{ - /* compiler should in-line these */ - s3c_irq_eint_mask(data); - s3c_irq_eint_ack(data); -} - -static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type) -{ - int offs = eint_offset(data->irq); - int pin, pin_val; - int shift; - u32 ctrl, mask; - u32 newvalue = 0; - void __iomem *reg; - - if (offs > 27) - return -EINVAL; - - if (offs <= 15) - reg = S3C64XX_EINT0CON0; - else - reg = S3C64XX_EINT0CON1; - - switch (type) { - case IRQ_TYPE_NONE: - printk(KERN_WARNING "No edge setting!\n"); - break; - - case IRQ_TYPE_EDGE_RISING: - newvalue = S3C2410_EXTINT_RISEEDGE; - break; - - case IRQ_TYPE_EDGE_FALLING: - newvalue = S3C2410_EXTINT_FALLEDGE; - break; - - case IRQ_TYPE_EDGE_BOTH: - newvalue = S3C2410_EXTINT_BOTHEDGE; - break; - - case IRQ_TYPE_LEVEL_LOW: - newvalue = S3C2410_EXTINT_LOWLEV; - break; - - case IRQ_TYPE_LEVEL_HIGH: - newvalue = S3C2410_EXTINT_HILEV; - break; - - default: - printk(KERN_ERR "No such irq type %d", type); - return -1; - } - - if (offs <= 15) - shift = (offs / 2) * 4; - else - shift = ((offs - 16) / 2) * 4; - mask = 0x7 << shift; - - ctrl = __raw_readl(reg); - ctrl &= ~mask; - ctrl |= newvalue << shift; - __raw_writel(ctrl, reg); - - /* set the GPIO pin appropriately */ - - if (offs < 16) { - pin = S3C64XX_GPN(offs); - pin_val = S3C_GPIO_SFN(2); - } else if (offs < 23) { - pin = S3C64XX_GPL(offs + 8 - 16); - pin_val = S3C_GPIO_SFN(3); - } else { - pin = S3C64XX_GPM(offs - 23); - pin_val = S3C_GPIO_SFN(3); - } - - s3c_gpio_cfgpin(pin, pin_val); - - return 0; -} - -static struct irq_chip s3c_irq_eint = { - .name = "s3c-eint", - .irq_mask = s3c_irq_eint_mask, - .irq_unmask = s3c_irq_eint_unmask, - .irq_mask_ack = s3c_irq_eint_maskack, - .irq_ack = s3c_irq_eint_ack, - .irq_set_type = s3c_irq_eint_set_type, - .irq_set_wake = s3c_irqext_wake, -}; - -/* s3c_irq_demux_eint - * - * This function demuxes the IRQ from the group0 external interrupts, - * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into - * the specific handlers s3c_irq_demux_eintX_Y. - */ -static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end) -{ - u32 status = __raw_readl(S3C64XX_EINT0PEND); - u32 mask = __raw_readl(S3C64XX_EINT0MASK); - unsigned int irq; - - status &= ~mask; - status >>= start; - status &= (1 << (end - start + 1)) - 1; - - for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) { - if (status & 1) - generic_handle_irq(irq); - - status >>= 1; - } -} - -static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_eint(0, 3); -} - -static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_eint(4, 11); -} - -static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_eint(12, 19); -} - -static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_eint(20, 27); -} - -static int __init s3c64xx_init_irq_eint(void) -{ - int irq; - - for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) { - irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq); - irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq)); - set_irq_flags(irq, IRQF_VALID); - } - - irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3); - irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11); - irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19); - irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27); - - return 0; -} - -arch_initcall(s3c64xx_init_irq_eint); diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c deleted file mode 100644 index b07357e94958..000000000000 --- a/arch/arm/mach-s3c64xx/irq.c +++ /dev/null @@ -1,47 +0,0 @@ -/* arch/arm/plat-s3c64xx/irq.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - Interrupt handling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/serial_core.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <asm/hardware/vic.h> - -#include <mach/map.h> -#include <plat/irq-vic-timer.h> -#include <plat/irq-uart.h> -#include <plat/cpu.h> - -/* setup the sources the vic should advertise resume for, even though it - * is not doing the wake (set_irq_wake needs to be valid) */ -#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE)) -#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \ - 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \ - 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \ - 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \ - 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE)) - -void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) -{ - printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); - - /* initialise the pair of VICs */ - vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME); - vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME); - - /* add the timer sub-irqs */ - s3c_init_vic_timer_irq(5, IRQ_TIMER0); -} diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index 8eba88e7209e..b86f2779e4e6 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -30,6 +30,7 @@ #include <video/platform_lcd.h> +#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -45,13 +46,14 @@ #include <plat/fb.h> #include <plat/regs-fb-v4.h> -#include <plat/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <mach/regs-gpio.h> #include <mach/regs-modem.h> +#include "common.h" + /* DM9000 */ #define ANW6410_PA_DM9000 (0x18000000) @@ -236,7 +238,9 @@ MACHINE_START(ANW6410, "A&W6410") .atag_offset = 0x100, .init_irq = s3c6410_init_irq, + .handle_irq = vic_handle_irq, .map_io = anw6410_map_io, .init_machine = anw6410_machine_init, .timer = &s3c24xx_timer, + .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index f208154b1382..cd3c97e2ee75 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -14,13 +14,43 @@ #include <linux/mfd/wm831x/irq.h> #include <linux/mfd/wm831x/gpio.h> +#include <linux/mfd/wm8994/pdata.h> +#include <sound/wm5100.h> #include <sound/wm8996.h> #include <sound/wm8962.h> #include <sound/wm9081.h> #include <mach/crag6410.h> +static struct wm5100_pdata wm5100_pdata = { + .ldo_ena = S3C64XX_GPN(7), + .irq_flags = IRQF_TRIGGER_HIGH, + .gpio_base = CODEC_GPIO_BASE, + + .in_mode = { + WM5100_IN_DIFF, + WM5100_IN_DIFF, + WM5100_IN_DIFF, + WM5100_IN_SE, + }, + + .hp_pol = CODEC_GPIO_BASE + 3, + .jack_modes = { + { WM5100_MICDET_MICBIAS3, 0, 0 }, + { WM5100_MICDET_MICBIAS2, 1, 1 }, + }, + + .gpio_defaults = { + 0, + 0, + 0, + 0, + 0x2, /* IRQ: CMOS output */ + 0x3, /* CLKOUT: CMOS output */ + }, +}; + static struct wm8996_retune_mobile_config wm8996_retune[] = { { .name = "Sub LPF", @@ -72,7 +102,6 @@ static struct wm8962_pdata wm8962_pdata __initdata = { 0x8000 | WM8962_GPIO_FN_DMICDAT, WM8962_GPIO_FN_IRQ, /* Open drain mode */ }, - .irq_active_low = true, }; static struct wm9081_pdata wm9081_pdata __initdata = { @@ -91,6 +120,7 @@ static const struct i2c_board_info wm1254_devs[] = { static const struct i2c_board_info wm1255_devs[] = { { I2C_BOARD_INFO("wm5100", 0x1a), + .platform_data = &wm5100_pdata, .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, }, { I2C_BOARD_INFO("wm9081", 0x6c), @@ -104,6 +134,24 @@ static const struct i2c_board_info wm1259_devs[] = { }, }; +static struct wm8994_pdata wm8994_pdata = { + .gpio_base = CODEC_GPIO_BASE, + .gpio_defaults = { + 0x3, /* IRQ out, active high, CMOS */ + }, + .irq_base = CODEC_IRQ_BASE, + .ldo = { + { .supply = "WALLVDD" }, + { .supply = "WALLVDD" }, + }, +}; + +static const struct i2c_board_info wm1277_devs[] = { + { I2C_BOARD_INFO("wm8958", 0x1a), /* WM8958 is the superset */ + .platform_data = &wm8994_pdata, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, +}; static __devinitdata const struct { u8 id; @@ -125,6 +173,8 @@ static __devinitdata const struct { { .id = 0x3b, .name = "1255-EV1 Kilchoman", .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) }, { .id = 0x3c, .name = "1273-EV1 Longmorn" }, + { .id = 0x3d, .name = "1277-EV1 Littlemill", + .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) }, }; static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, @@ -154,8 +204,8 @@ static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, "Failed to register dev: %d\n", ret); } } else { - dev_warn(&i2c->dev, "Unknown module ID %d revision %d\n", - id, rev); + dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n", + id, rev + 1); } return 0; diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index d04b65448510..680fd758ff2d 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -37,6 +37,9 @@ #include <linux/mfd/wm831x/irq.h> #include <linux/mfd/wm831x/gpio.h> +#include <sound/wm1250-ev1.h> + +#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -50,7 +53,6 @@ #include <mach/regs-gpio-memport.h> -#include <plat/s3c6410.h> #include <plat/regs-serial.h> #include <plat/regs-fb-v4.h> #include <plat/fb.h> @@ -66,6 +68,8 @@ #include <plat/iic.h> #include <plat/pm.h> +#include "common.h" + /* serial port setup */ #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) @@ -287,6 +291,11 @@ static struct platform_device speyside_wm8962_device = { .id = -1, }; +static struct platform_device littlemill_device = { + .name = "littlemill", + .id = -1, +}; + static struct regulator_consumer_supply wallvdd_consumers[] = { REGULATOR_SUPPLY("SPKVDD1", "1-001a"), REGULATOR_SUPPLY("SPKVDD2", "1-001a"), @@ -339,6 +348,7 @@ static struct platform_device *crag6410_devices[] __initdata = { &crag6410_backlight_device, &speyside_device, &speyside_wm8962_device, + &littlemill_device, &lowland_device, &wallvdd_device, }; @@ -372,6 +382,10 @@ static struct regulator_init_data vddarm __initdata = { .driver_data = &vddarm_pdata, }; +static struct regulator_consumer_supply vddint_consumers[] __initdata = { + REGULATOR_SUPPLY("vddint", NULL), +}; + static struct regulator_init_data vddint __initdata = { .constraints = { .name = "VDDINT", @@ -380,6 +394,9 @@ static struct regulator_init_data vddint __initdata = { .always_on = 1, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, }, + .num_consumer_supplies = ARRAY_SIZE(vddint_consumers), + .consumer_supplies = vddint_consumers, + .supply_regulator = "WALLVDD", }; static struct regulator_init_data vddmem __initdata = { @@ -500,7 +517,8 @@ static struct wm831x_touch_pdata touch_pdata __initdata = { static struct wm831x_pdata crag_pmic_pdata __initdata = { .wm831x_num = 1, .irq_base = BANFF_PMIC_IRQ_BASE, - .gpio_base = GPIO_BOARD_START + 8, + .gpio_base = BANFF_PMIC_GPIO_BASE, + .soft_shutdown = true, .backup = &banff_backup_pdata, @@ -605,6 +623,7 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { .wm831x_num = 2, .irq_base = GLENFARCLAS_PMIC_IRQ_BASE, .gpio_base = GLENFARCLAS_PMIC_GPIO_BASE, + .soft_shutdown = true, .gpio_defaults = { /* GPIO1-3: IRQ inputs, rising edge triggered, CMOS */ @@ -622,6 +641,16 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { .disable_touch = true, }; +static struct wm1250_ev1_pdata wm1250_ev1_pdata = { + .gpios = { + [WM1250_EV1_GPIO_CLK_ENA] = S3C64XX_GPN(12), + [WM1250_EV1_GPIO_CLK_SEL0] = S3C64XX_GPL(12), + [WM1250_EV1_GPIO_CLK_SEL1] = S3C64XX_GPL(13), + [WM1250_EV1_GPIO_OSR] = S3C64XX_GPL(14), + [WM1250_EV1_GPIO_MASTER] = S3C64XX_GPL(8), + }, +}; + static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("wm8311", 0x34), .irq = S3C_EINT(0), @@ -631,7 +660,13 @@ static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("wlf-gf-module", 0x25) }, { I2C_BOARD_INFO("wlf-gf-module", 0x26) }, - { I2C_BOARD_INFO("wm1250-ev1", 0x27) }, + { I2C_BOARD_INFO("wm1250-ev1", 0x27), + .platform_data = &wm1250_ev1_pdata }, +}; + +static struct s3c2410_platform_i2c i2c1_pdata = { + .frequency = 400000, + .bus_num = 1, }; static void __init crag6410_map_io(void) @@ -692,7 +727,7 @@ static void __init crag6410_machine_init(void) s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata); s3c_i2c0_set_platdata(&i2c0_pdata); - s3c_i2c1_set_platdata(NULL); + s3c_i2c1_set_platdata(&i2c1_pdata); s3c_fb_set_platdata(&crag6410_lcd_pdata); i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); @@ -704,14 +739,16 @@ static void __init crag6410_machine_init(void) regulator_has_full_constraints(); - s3c_pm_init(); + s3c64xx_pm_init(); } MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410") /* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */ .atag_offset = 0x100, .init_irq = s3c6410_init_irq, + .handle_irq = vic_handle_irq, .map_io = crag6410_map_io, .init_machine = crag6410_machine_init, .timer = &s3c24xx_timer, + .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index 952f75ff5deb..521e07b8501b 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -29,6 +29,7 @@ #include <mach/hardware.h> #include <mach/map.h> +#include <asm/hardware/vic.h> #include <asm/irq.h> #include <asm/mach-types.h> @@ -37,12 +38,13 @@ #include <plat/fb.h> #include <plat/nand.h> -#include <plat/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/regs-fb-v4.h> +#include "common.h" + #define UCON S3C2410_UCON_DEFAULT #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) @@ -267,7 +269,9 @@ MACHINE_START(HMT, "Airgoo-HMT") /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */ .atag_offset = 0x100, .init_irq = s3c6410_init_irq, + .handle_irq = vic_handle_irq, .map_io = hmt_map_io, .init_machine = hmt_machine_init, .timer = &s3c24xx_timer, + .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index 1bc85c359498..c34c2ab22ead 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -24,6 +24,7 @@ #include <linux/serial_core.h> #include <linux/types.h> +#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -33,7 +34,6 @@ #include <mach/regs-modem.h> #include <mach/regs-srom.h> -#include <plat/s3c6410.h> #include <plat/adc.h> #include <plat/cpu.h> #include <plat/devs.h> @@ -45,6 +45,8 @@ #include <video/platform_lcd.h> +#include "common.h" + #define UCON S3C2410_UCON_DEFAULT #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) @@ -345,7 +347,9 @@ MACHINE_START(MINI6410, "MINI6410") /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */ .atag_offset = 0x100, .init_irq = s3c6410_init_irq, + .handle_irq = vic_handle_irq, .map_io = mini6410_map_io, .init_machine = mini6410_machine_init, .timer = &s3c24xx_timer, + .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index cb13cba98b3d..0efa2ba783b2 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -25,6 +25,7 @@ #include <video/platform_lcd.h> +#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -39,12 +40,13 @@ #include <plat/iic.h> #include <plat/fb.h> -#include <plat/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/regs-fb-v4.h> +#include "common.h" + #define UCON S3C2410_UCON_DEFAULT #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE @@ -99,7 +101,9 @@ MACHINE_START(NCP, "NCP") /* Maintainer: Samsung Electronics */ .atag_offset = 0x100, .init_irq = s3c6410_init_irq, + .handle_irq = vic_handle_irq, .map_io = ncp_map_io, .init_machine = ncp_machine_init, .timer = &s3c24xx_timer, + .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index 87281e4b8471..be2a9a22ab74 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -25,6 +25,7 @@ #include <linux/serial_core.h> #include <linux/types.h> +#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -34,7 +35,6 @@ #include <mach/regs-modem.h> #include <mach/regs-srom.h> -#include <plat/s3c6410.h> #include <plat/adc.h> #include <plat/cpu.h> #include <plat/devs.h> @@ -46,6 +46,8 @@ #include <video/platform_lcd.h> +#include "common.h" + #define UCON S3C2410_UCON_DEFAULT #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) @@ -326,7 +328,9 @@ MACHINE_START(REAL6410, "REAL6410") .atag_offset = 0x100, .init_irq = s3c6410_init_irq, + .handle_irq = vic_handle_irq, .map_io = real6410_map_io, .init_machine = real6410_machine_init, .timer = &s3c24xx_timer, + .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index cb1ebeb08763..ce31db136231 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -40,6 +40,8 @@ #include <video/platform_lcd.h> +#include "common.h" + #define UCON S3C2410_UCON_DEFAULT #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c index 94c831d88365..3f42431d4dda 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq5.c +++ b/arch/arm/mach-s3c64xx/mach-smartq5.c @@ -17,19 +17,20 @@ #include <linux/leds.h> #include <linux/platform_device.h> +#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/map.h> #include <mach/regs-gpio.h> -#include <plat/s3c6410.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> #include <plat/regs-fb-v4.h> +#include "common.h" #include "mach-smartq.h" static struct gpio_led smartq5_leds[] = { @@ -148,7 +149,9 @@ MACHINE_START(SMARTQ5, "SmartQ 5") /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */ .atag_offset = 0x100, .init_irq = s3c6410_init_irq, + .handle_irq = vic_handle_irq, .map_io = smartq_map_io, .init_machine = smartq5_machine_init, .timer = &s3c24xx_timer, + .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c index f112547ce80a..e5c09b6db967 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq7.c +++ b/arch/arm/mach-s3c64xx/mach-smartq7.c @@ -17,19 +17,20 @@ #include <linux/leds.h> #include <linux/platform_device.h> +#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/map.h> #include <mach/regs-gpio.h> -#include <plat/s3c6410.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> #include <plat/regs-fb-v4.h> +#include "common.h" #include "mach-smartq.h" static struct gpio_led smartq7_leds[] = { @@ -164,7 +165,9 @@ MACHINE_START(SMARTQ7, "SmartQ 7") /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */ .atag_offset = 0x100, .init_irq = s3c6410_init_irq, + .handle_irq = vic_handle_irq, .map_io = smartq_map_io, .init_machine = smartq7_machine_init, .timer = &s3c24xx_timer, + .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index 73450c2b530a..5f096534f4c4 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -22,6 +22,7 @@ #include <asm/mach-types.h> +#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -31,12 +32,13 @@ #include <plat/regs-serial.h> -#include <plat/s3c6400.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/iic.h> +#include "common.h" + #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE @@ -88,7 +90,9 @@ MACHINE_START(SMDK6400, "SMDK6400") .atag_offset = 0x100, .init_irq = s3c6400_init_irq, + .handle_irq = vic_handle_irq, .map_io = smdk6400_map_io, .init_machine = smdk6400_machine_init, .timer = &s3c24xx_timer, + .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 8bc8edd85e5a..ca6fc204f0ea 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -43,6 +43,7 @@ #include <video/platform_lcd.h> +#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -63,7 +64,6 @@ #include <plat/fb.h> #include <plat/gpio-cfg.h> -#include <plat/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -73,6 +73,8 @@ #include <plat/backlight.h> #include <plat/regs-fb-v4.h> +#include "common.h" + #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE @@ -700,7 +702,9 @@ MACHINE_START(SMDK6410, "SMDK6410") .atag_offset = 0x100, .init_irq = s3c6410_init_irq, + .handle_irq = vic_handle_irq, .map_io = smdk6410_map_io, .init_machine = smdk6410_machine_init, .timer = &s3c24xx_timer, + .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index b375cd5c47cb..055dac90e0e2 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -17,10 +17,12 @@ #include <linux/serial_core.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/pm_domain.h> #include <mach/map.h> #include <mach/irqs.h> +#include <plat/devs.h> #include <plat/pm.h> #include <plat/wakeup-mask.h> @@ -31,6 +33,148 @@ #include <mach/regs-gpio-memport.h> #include <mach/regs-modem.h> +struct s3c64xx_pm_domain { + char *const name; + u32 ena; + u32 pwr_stat; + struct generic_pm_domain pd; +}; + +static int s3c64xx_pd_off(struct generic_pm_domain *domain) +{ + struct s3c64xx_pm_domain *pd; + u32 val; + + pd = container_of(domain, struct s3c64xx_pm_domain, pd); + + val = __raw_readl(S3C64XX_NORMAL_CFG); + val &= ~(pd->ena); + __raw_writel(val, S3C64XX_NORMAL_CFG); + + return 0; +} + +static int s3c64xx_pd_on(struct generic_pm_domain *domain) +{ + struct s3c64xx_pm_domain *pd; + u32 val; + long retry = 1000000L; + + pd = container_of(domain, struct s3c64xx_pm_domain, pd); + + val = __raw_readl(S3C64XX_NORMAL_CFG); + val |= pd->ena; + __raw_writel(val, S3C64XX_NORMAL_CFG); + + /* Not all domains provide power status readback */ + if (pd->pwr_stat) { + do { + cpu_relax(); + if (__raw_readl(S3C64XX_BLK_PWR_STAT) & pd->pwr_stat) + break; + } while (retry--); + + if (!retry) { + pr_err("Failed to start domain %s\n", pd->name); + return -EBUSY; + } + } + + return 0; +} + +static struct s3c64xx_pm_domain s3c64xx_pm_irom = { + .name = "IROM", + .ena = S3C64XX_NORMALCFG_IROM_ON, + .pd = { + .power_off = s3c64xx_pd_off, + .power_on = s3c64xx_pd_on, + }, +}; + +static struct s3c64xx_pm_domain s3c64xx_pm_etm = { + .name = "ETM", + .ena = S3C64XX_NORMALCFG_DOMAIN_ETM_ON, + .pwr_stat = S3C64XX_BLKPWRSTAT_ETM, + .pd = { + .power_off = s3c64xx_pd_off, + .power_on = s3c64xx_pd_on, + }, +}; + +static struct s3c64xx_pm_domain s3c64xx_pm_s = { + .name = "S", + .ena = S3C64XX_NORMALCFG_DOMAIN_S_ON, + .pwr_stat = S3C64XX_BLKPWRSTAT_S, + .pd = { + .power_off = s3c64xx_pd_off, + .power_on = s3c64xx_pd_on, + }, +}; + +static struct s3c64xx_pm_domain s3c64xx_pm_f = { + .name = "F", + .ena = S3C64XX_NORMALCFG_DOMAIN_F_ON, + .pwr_stat = S3C64XX_BLKPWRSTAT_F, + .pd = { + .power_off = s3c64xx_pd_off, + .power_on = s3c64xx_pd_on, + }, +}; + +static struct s3c64xx_pm_domain s3c64xx_pm_p = { + .name = "P", + .ena = S3C64XX_NORMALCFG_DOMAIN_P_ON, + .pwr_stat = S3C64XX_BLKPWRSTAT_P, + .pd = { + .power_off = s3c64xx_pd_off, + .power_on = s3c64xx_pd_on, + }, +}; + +static struct s3c64xx_pm_domain s3c64xx_pm_i = { + .name = "I", + .ena = S3C64XX_NORMALCFG_DOMAIN_I_ON, + .pwr_stat = S3C64XX_BLKPWRSTAT_I, + .pd = { + .power_off = s3c64xx_pd_off, + .power_on = s3c64xx_pd_on, + }, +}; + +static struct s3c64xx_pm_domain s3c64xx_pm_g = { + .name = "G", + .ena = S3C64XX_NORMALCFG_DOMAIN_G_ON, + .pd = { + .power_off = s3c64xx_pd_off, + .power_on = s3c64xx_pd_on, + }, +}; + +static struct s3c64xx_pm_domain s3c64xx_pm_v = { + .name = "V", + .ena = S3C64XX_NORMALCFG_DOMAIN_V_ON, + .pwr_stat = S3C64XX_BLKPWRSTAT_V, + .pd = { + .power_off = s3c64xx_pd_off, + .power_on = s3c64xx_pd_on, + }, +}; + +static struct s3c64xx_pm_domain *s3c64xx_always_on_pm_domains[] = { + &s3c64xx_pm_irom, +}; + +static struct s3c64xx_pm_domain *s3c64xx_pm_domains[] = { + &s3c64xx_pm_etm, + &s3c64xx_pm_g, + &s3c64xx_pm_v, + &s3c64xx_pm_i, + &s3c64xx_pm_p, + &s3c64xx_pm_s, + &s3c64xx_pm_f, +}; + #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK void s3c_pm_debug_smdkled(u32 set, u32 clear) { @@ -89,6 +233,8 @@ static struct sleep_save misc_save[] = { SAVE_ITEM(S3C64XX_SDMA_SEL), SAVE_ITEM(S3C64XX_MODEM_MIFPCON), + + SAVE_ITEM(S3C64XX_NORMAL_CFG), }; void s3c_pm_configure_extint(void) @@ -179,12 +325,44 @@ static void s3c64xx_pm_prepare(void) __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT); } -static int s3c64xx_pm_init(void) +int __init s3c64xx_pm_init(void) +{ + int i; + + s3c_pm_init(); + + for (i = 0; i < ARRAY_SIZE(s3c64xx_always_on_pm_domains); i++) + pm_genpd_init(&s3c64xx_always_on_pm_domains[i]->pd, + &pm_domain_always_on_gov, false); + + for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++) + pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false); + + if (dev_get_platdata(&s3c_device_fb.dev)) + pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev); + + return 0; +} + +static __init int s3c64xx_pm_initcall(void) { + u32 val; + pm_cpu_prep = s3c64xx_pm_prepare; pm_cpu_sleep = s3c64xx_cpu_suspend; pm_uart_udivslot = 1; + /* + * Unconditionally disable power domains that contain only + * blocks which have no mainline driver support. + */ + val = __raw_readl(S3C64XX_NORMAL_CFG); + val &= ~(S3C64XX_NORMALCFG_DOMAIN_G_ON | + S3C64XX_NORMALCFG_DOMAIN_V_ON | + S3C64XX_NORMALCFG_DOMAIN_I_ON | + S3C64XX_NORMALCFG_DOMAIN_P_ON); + __raw_writel(val, S3C64XX_NORMAL_CFG); + #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK gpio_request(S3C64XX_GPN(12), "DEBUG_LED0"); gpio_request(S3C64XX_GPN(13), "DEBUG_LED1"); @@ -198,5 +376,12 @@ static int s3c64xx_pm_init(void) return 0; } +arch_initcall(s3c64xx_pm_initcall); + +static __init int s3c64xx_pm_late_initcall(void) +{ + pm_genpd_poweroff_unused(); -arch_initcall(s3c64xx_pm_init); + return 0; +} +late_initcall(s3c64xx_pm_late_initcall); diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 7a3bc32df425..4869714c6f1b 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -17,7 +17,7 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/io.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/serial_core.h> #include <linux/platform_device.h> @@ -38,7 +38,8 @@ #include <plat/sdhci.h> #include <plat/iic-core.h> #include <plat/onenand-core.h> -#include <plat/s3c6400.h> + +#include "common.h" void __init s3c6400_map_io(void) { @@ -60,7 +61,7 @@ void __init s3c6400_map_io(void) void __init s3c6400_init_clocks(int xtal) { s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK); - s3c6400_setup_clocks(); + s3c64xx_setup_clocks(); } void __init s3c6400_init_irq(void) @@ -70,17 +71,18 @@ void __init s3c6400_init_irq(void) s3c64xx_init_irq(~0 & ~(0xf << 5), ~0); } -struct sysdev_class s3c6400_sysclass = { - .name = "s3c6400-core", +static struct bus_type s3c6400_subsys = { + .name = "s3c6400-core", + .dev_name = "s3c6400-core", }; -static struct sys_device s3c6400_sysdev = { - .cls = &s3c6400_sysclass, +static struct device s3c6400_dev = { + .bus = &s3c6400_subsys, }; static int __init s3c6400_core_init(void) { - return sysdev_class_register(&s3c6400_sysclass); + return subsys_system_register(&s3c6400_subsys, NULL); } core_initcall(s3c6400_core_init); @@ -89,5 +91,5 @@ int __init s3c6400_init(void) { printk("S3C6400: Initialising architecture\n"); - return sysdev_register(&s3c6400_sysdev); + return device_register(&s3c6400_dev); } diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c index 4117003464ad..31c29fdf1800 100644 --- a/arch/arm/mach-s3c64xx/s3c6410.c +++ b/arch/arm/mach-s3c64xx/s3c6410.c @@ -18,7 +18,7 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/io.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/serial_core.h> #include <linux/platform_device.h> @@ -41,8 +41,8 @@ #include <plat/adc-core.h> #include <plat/iic-core.h> #include <plat/onenand-core.h> -#include <plat/s3c6400.h> -#include <plat/s3c6410.h> + +#include "common.h" void __init s3c6410_map_io(void) { @@ -66,7 +66,7 @@ void __init s3c6410_init_clocks(int xtal) { printk(KERN_DEBUG "%s: initialising clocks\n", __func__); s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK); - s3c6400_setup_clocks(); + s3c64xx_setup_clocks(); } void __init s3c6410_init_irq(void) @@ -75,17 +75,18 @@ void __init s3c6410_init_irq(void) s3c64xx_init_irq(~0 & ~(1 << 7), ~0); } -struct sysdev_class s3c6410_sysclass = { - .name = "s3c6410-core", +struct bus_type s3c6410_subsys = { + .name = "s3c6410-core", + .dev_name = "s3c6410-core", }; -static struct sys_device s3c6410_sysdev = { - .cls = &s3c6410_sysclass, +static struct device s3c6410_dev = { + .bus = &s3c6410_subsys, }; static int __init s3c6410_core_init(void) { - return sysdev_class_register(&s3c6410_sysclass); + return subsys_system_register(&s3c6410_subsys, NULL); } core_initcall(s3c6410_core_init); @@ -94,5 +95,5 @@ int __init s3c6410_init(void) { printk("S3C6410: Initialising architecture\n"); - return sysdev_register(&s3c6410_sysdev); + return device_register(&s3c6410_dev); } diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c index 83d2afb79e9f..2cf80026c58d 100644 --- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c +++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c @@ -20,7 +20,7 @@ #include <plat/fb.h> #include <plat/gpio-cfg.h> -extern void s3c64xx_fb_gpio_setup_24bpp(void) +void s3c64xx_fb_gpio_setup_24bpp(void) { s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2)); s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2)); diff --git a/arch/arm/mach-s3c64xx/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c deleted file mode 100644 index c75a71b21165..000000000000 --- a/arch/arm/mach-s3c64xx/setup-sdhci.c +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/setup-sdhci.c - * - * Copyright 2008 Simtec Electronics - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C6400/S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/types.h> - -/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ - -char *s3c64xx_hsmmc_clksrcs[4] = { - [0] = "hsmmc", - [1] = "hsmmc", - [2] = "mmc_bus", - /* [3] = "48m", - note not successfully used yet */ -}; diff --git a/arch/arm/mach-s3c64xx/setup-spi.c b/arch/arm/mach-s3c64xx/setup-spi.c new file mode 100644 index 000000000000..d9592ad7a825 --- /dev/null +++ b/arch/arm/mach-s3c64xx/setup-spi.c @@ -0,0 +1,45 @@ +/* linux/arch/arm/mach-s3c64xx/setup-spi.c + * + * Copyright (C) 2011 Samsung Electronics Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <linux/platform_device.h> + +#include <plat/gpio-cfg.h> +#include <plat/s3c64xx-spi.h> + +#ifdef CONFIG_S3C64XX_DEV_SPI0 +struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = { + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 13, + .tx_st_done = 21, +}; + +int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgall_range(S3C64XX_GPC(0), 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; +} +#endif + +#ifdef CONFIG_S3C64XX_DEV_SPI1 +struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = { + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 13, + .tx_st_done = 21, +}; + +int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgall_range(S3C64XX_GPC(4), 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; +} +#endif diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig index 18690c5f99e6..c87f6108eeb1 100644 --- a/arch/arm/mach-s5p64x0/Kconfig +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -36,6 +36,16 @@ config S5P64X0_SETUP_I2C1 help Common setup code for i2c bus 1. +config S5P64X0_SETUP_SPI + bool + help + Common setup code for SPI GPIO configurations + +config S5P64X0_SETUP_SDHCI_GPIO + bool + help + Common setup code for SDHCI gpio. + # machine support config MACH_SMDK6440 @@ -45,13 +55,16 @@ config MACH_SMDK6440 select S3C_DEV_I2C1 select S3C_DEV_RTC select S3C_DEV_WDT - select S3C64XX_DEV_SPI + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 select SAMSUNG_DEV_ADC select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS select S5P64X0_SETUP_FB_24BPP select S5P64X0_SETUP_I2C1 + select S5P64X0_SETUP_SDHCI_GPIO help Machine support for the Samsung SMDK6440 @@ -62,14 +75,28 @@ config MACH_SMDK6450 select S3C_DEV_I2C1 select S3C_DEV_RTC select S3C_DEV_WDT - select S3C64XX_DEV_SPI + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 select SAMSUNG_DEV_ADC select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS select S5P64X0_SETUP_FB_24BPP select S5P64X0_SETUP_I2C1 + select S5P64X0_SETUP_SDHCI_GPIO help Machine support for the Samsung SMDK6450 +menu "Use 8-bit SDHCI bus width" + +config S5P64X0_SD_CH1_8BIT + bool "SDHCI Channel 1 (Slot 1)" + depends on MACH_SMDK6450 || MACH_SMDK6440 + help + Support SDHCI Channel 1 8-bit bus. + If selected, Channel 2 is disabled. + +endmenu + endif diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile index a1324d8dc4e0..12bb951187a4 100644 --- a/arch/arm/mach-s5p64x0/Makefile +++ b/arch/arm/mach-s5p64x0/Makefile @@ -10,14 +10,16 @@ obj-m := obj-n := obj- := -# Core support for S5P64X0 system +# Core -obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o -obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o irq-eint.o +obj-y += common.o clock.o obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o + obj-$(CONFIG_PM) += pm.o irq-pm.o +obj-y += dma.o + # machine support obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o @@ -26,7 +28,9 @@ obj-$(CONFIG_MACH_SMDK6450) += mach-smdk6450.o # device support obj-y += dev-audio.o -obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o +obj-y += setup-i2c0.o obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP) += setup-fb-24bpp.o +obj-$(CONFIG_S5P64X0_SETUP_SPI) += setup-spi.o +obj-$(CONFIG_S5P64X0_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c index c54c65d511f0..ee1e8e7f5631 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6440.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -17,7 +17,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/clk.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/io.h> #include <mach/hardware.h> @@ -31,7 +31,8 @@ #include <plat/pll.h> #include <plat/s5p-clock.h> #include <plat/clock-clksrc.h> -#include <plat/s5p6440.h> + +#include "common.h" static u32 epll_div[][5] = { { 36000000, 0, 48, 1, 4 }, @@ -268,18 +269,6 @@ static struct clk init_clocks_off[] = { .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 31), }, { - .name = "sclk_spi_48", - .devname = "s3c64xx-spi.0", - .parent = &clk_48m, - .enable = s5p64x0_sclk_ctrl, - .ctrlbit = (1 << 22), - }, { - .name = "sclk_spi_48", - .devname = "s3c64xx-spi.1", - .parent = &clk_48m, - .enable = s5p64x0_sclk_ctrl, - .ctrlbit = (1 << 23), - }, { .name = "mmc_48m", .devname = "s3c-sdhci.0", .parent = &clk_48m, @@ -391,65 +380,6 @@ static struct clksrc_sources clkset_audio = { static struct clksrc_clk clksrcs[] = { { .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.0", - .ctrlbit = (1 << 24), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.1", - .ctrlbit = (1 << 25), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.2", - .ctrlbit = (1 << 26), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .ctrlbit = (1 << 5), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.0", - .ctrlbit = (1 << 20), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.1", - .ctrlbit = (1 << 21), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 }, - }, { - .clk = { .name = "sclk_post", .ctrlbit = (1 << 10), .enable = s5p64x0_sclk_ctrl, @@ -487,6 +417,77 @@ static struct clksrc_clk clksrcs[] = { }, }; +static struct clksrc_clk clk_sclk_mmc0 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.0", + .ctrlbit = (1 << 24), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc1 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.1", + .ctrlbit = (1 << 25), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc2 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.2", + .ctrlbit = (1 << 26), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uclk = { + .clk = { + .name = "uclk1", + .ctrlbit = (1 << 5), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_spi0 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.0", + .ctrlbit = (1 << 20), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_spi1 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.1", + .ctrlbit = (1 << 21), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 }, +}; + /* Clock initialization code */ static struct clksrc_clk *sysclks[] = { &clk_mout_apll, @@ -505,6 +506,26 @@ static struct clk dummy_apb_pclk = { .id = -1, }; +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uclk, + &clk_sclk_spi0, + &clk_sclk_spi1, + &clk_sclk_mmc0, + &clk_sclk_mmc1, + &clk_sclk_mmc2 +}; + +static struct clk_lookup s5p6440_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), + CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), + CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), + CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), +}; + void __init_or_cpufreq s5p6440_setup_clocks(void) { struct clk *xtal_clk; @@ -583,9 +604,12 @@ void __init s5p6440_register_clocks(void) s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) + s3c_register_clksrc(clksrc_cdev[ptr], 1); s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(s5p6440_clk_lookup, ARRAY_SIZE(s5p6440_clk_lookup)); s3c24xx_register_clock(&dummy_apb_pclk); diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c index 2d04abfba12e..dae6a13f43bb 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6450.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -17,7 +17,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/clk.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/io.h> #include <mach/hardware.h> @@ -31,7 +31,8 @@ #include <plat/pll.h> #include <plat/s5p-clock.h> #include <plat/clock-clksrc.h> -#include <plat/s5p6450.h> + +#include "common.h" static struct clksrc_clk clk_mout_dpll = { .clk = { @@ -413,65 +414,6 @@ static struct clksrc_clk clk_sclk_audio0 = { static struct clksrc_clk clksrcs[] = { { .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.0", - .ctrlbit = (1 << 24), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.1", - .ctrlbit = (1 << 25), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.2", - .ctrlbit = (1 << 26), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .ctrlbit = (1 << 5), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.0", - .ctrlbit = (1 << 20), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.1", - .ctrlbit = (1 << 21), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 }, - }, { - .clk = { .name = "sclk_fimc", .ctrlbit = (1 << 10), .enable = s5p64x0_sclk_ctrl, @@ -536,6 +478,97 @@ static struct clksrc_clk clksrcs[] = { }, }; +static struct clksrc_clk clk_sclk_mmc0 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.0", + .ctrlbit = (1 << 24), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc1 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.1", + .ctrlbit = (1 << 25), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc2 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.2", + .ctrlbit = (1 << 26), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uclk = { + .clk = { + .name = "uclk1", + .ctrlbit = (1 << 5), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_spi0 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.0", + .ctrlbit = (1 << 20), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_spi1 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.1", + .ctrlbit = (1 << 21), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uclk, + &clk_sclk_spi0, + &clk_sclk_spi1, + &clk_sclk_mmc0, + &clk_sclk_mmc1, + &clk_sclk_mmc2, +}; + +static struct clk_lookup s5p6450_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), + CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), + CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), + CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), +}; + /* Clock initialization code */ static struct clksrc_clk *sysclks[] = { &clk_mout_apll, @@ -634,9 +667,12 @@ void __init s5p6450_register_clocks(void) s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) + s3c_register_clksrc(clksrc_cdev[ptr], 1); s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(s5p6450_clk_lookup, ARRAY_SIZE(s5p6450_clk_lookup)); s3c24xx_register_clock(&dummy_apb_pclk); diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c index b52c6e2f37a6..241d0e645c85 100644 --- a/arch/arm/mach-s5p64x0/clock.c +++ b/arch/arm/mach-s5p64x0/clock.c @@ -17,7 +17,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/clk.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/io.h> #include <mach/hardware.h> @@ -30,8 +30,8 @@ #include <plat/pll.h> #include <plat/s5p-clock.h> #include <plat/clock-clksrc.h> -#include <plat/s5p6440.h> -#include <plat/s5p6450.h> + +#include "common.h" struct clksrc_clk clk_mout_apll = { .clk = { diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c new file mode 100644 index 000000000000..52b89a376447 --- /dev/null +++ b/arch/arm/mach-s5p64x0/common.c @@ -0,0 +1,447 @@ +/* + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Common Codes for S5P64X0 machines + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/device.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/dma-mapping.h> +#include <linux/gpio.h> +#include <linux/irq.h> + +#include <asm/irq.h> +#include <asm/proc-fns.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/map.h> +#include <mach/hardware.h> +#include <mach/regs-clock.h> +#include <mach/regs-gpio.h> + +#include <plat/cpu.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/pm.h> +#include <plat/sdhci.h> +#include <plat/adc-core.h> +#include <plat/fb-core.h> +#include <plat/gpio-cfg.h> +#include <plat/regs-irqtype.h> +#include <plat/regs-serial.h> +#include <plat/watchdog-reset.h> + +#include "common.h" + +static const char name_s5p6440[] = "S5P6440"; +static const char name_s5p6450[] = "S5P6450"; + +static struct cpu_table cpu_ids[] __initdata = { + { + .idcode = S5P6440_CPU_ID, + .idmask = S5P64XX_CPU_MASK, + .map_io = s5p6440_map_io, + .init_clocks = s5p6440_init_clocks, + .init_uarts = s5p6440_init_uarts, + .init = s5p64x0_init, + .name = name_s5p6440, + }, { + .idcode = S5P6450_CPU_ID, + .idmask = S5P64XX_CPU_MASK, + .map_io = s5p6450_map_io, + .init_clocks = s5p6450_init_clocks, + .init_uarts = s5p6450_init_uarts, + .init = s5p64x0_init, + .name = name_s5p6450, + }, +}; + +/* Initial IO mappings */ + +static struct map_desc s5p64x0_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_CHIPID, + .pfn = __phys_to_pfn(S5P64X0_PA_CHIPID), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_SYS, + .pfn = __phys_to_pfn(S5P64X0_PA_SYSCON), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_TIMER, + .pfn = __phys_to_pfn(S5P64X0_PA_TIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_WATCHDOG, + .pfn = __phys_to_pfn(S5P64X0_PA_WDT), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SROMC, + .pfn = __phys_to_pfn(S5P64X0_PA_SROMC), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5P64X0_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5P64X0_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5P64X0_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc s5p6440_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S5P6440_PA_UART(0)), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc s5p6450_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S5P6450_PA_UART(0)), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART + SZ_512K, + .pfn = __phys_to_pfn(S5P6450_PA_UART(5)), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void s5p64x0_idle(void) +{ + unsigned long val; + + if (!need_resched()) { + val = __raw_readl(S5P64X0_PWR_CFG); + val &= ~(0x3 << 5); + val |= (0x1 << 5); + __raw_writel(val, S5P64X0_PWR_CFG); + + cpu_do_idle(); + } + local_irq_enable(); +} + +/* + * s5p64x0_map_io + * + * register the standard CPU IO areas + */ + +void __init s5p64x0_init_io(struct map_desc *mach_desc, int size) +{ + /* initialize the io descriptors we need for initialization */ + iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); + if (mach_desc) + iotable_init(mach_desc, size); + + /* detect cpu id and rev. */ + s5p_init_cpu(S5P64X0_SYS_ID); + + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); +} + +void __init s5p6440_map_io(void) +{ + /* initialize any device information early */ + s3c_adc_setname("s3c64xx-adc"); + s3c_fb_setname("s5p64x0-fb"); + + s5p64x0_default_sdhci0(); + s5p64x0_default_sdhci1(); + s5p6440_default_sdhci2(); + + iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); + init_consistent_dma_size(SZ_8M); +} + +void __init s5p6450_map_io(void) +{ + /* initialize any device information early */ + s3c_adc_setname("s3c64xx-adc"); + s3c_fb_setname("s5p64x0-fb"); + + s5p64x0_default_sdhci0(); + s5p64x0_default_sdhci1(); + s5p6450_default_sdhci2(); + + iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc)); + init_consistent_dma_size(SZ_8M); +} + +/* + * s5p64x0_init_clocks + * + * register and setup the CPU clocks + */ + +void __init s5p6440_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + s5p6440_register_clocks(); + s5p6440_setup_clocks(); +} + +void __init s5p6450_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + s5p6450_register_clocks(); + s5p6450_setup_clocks(); +} + +/* + * s5p64x0_init_irq + * + * register the CPU interrupts + */ + +void __init s5p6440_init_irq(void) +{ + /* S5P6440 supports 2 VIC */ + u32 vic[2]; + + /* + * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)] + * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22] + */ + vic[0] = 0xff800ae7; + vic[1] = 0xffbf23e5; + + s5p_init_irq(vic, ARRAY_SIZE(vic)); +} + +void __init s5p6450_init_irq(void) +{ + /* S5P6450 supports only 2 VIC */ + u32 vic[2]; + + /* + * VIC0 is missing IRQ_VIC0[(13-15), (21-22)] + * VIC1 is missing IRQ VIC1[12, 14, 23] + */ + vic[0] = 0xff9f1fff; + vic[1] = 0xff7fafff; + + s5p_init_irq(vic, ARRAY_SIZE(vic)); +} + +struct bus_type s5p64x0_subsys = { + .name = "s5p64x0-core", + .dev_name = "s5p64x0-core", +}; + +static struct device s5p64x0_dev = { + .bus = &s5p64x0_subsys, +}; + +static int __init s5p64x0_core_init(void) +{ + return subsys_system_register(&s5p64x0_subsys, NULL); +} +core_initcall(s5p64x0_core_init); + +int __init s5p64x0_init(void) +{ + printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n"); + + /* set idle function */ + pm_idle = s5p64x0_idle; + + return device_register(&s5p64x0_dev); +} + +/* uart registration process */ +void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + int uart; + + for (uart = 0; uart < no; uart++) { + s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart); + s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART; + } + + s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); +} + +void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); +} + +#define eint_offset(irq) ((irq) - IRQ_EINT(0)) + +static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type) +{ + int offs = eint_offset(data->irq); + int shift; + u32 ctrl, mask; + u32 newvalue = 0; + + if (offs > 15) + return -EINVAL; + + switch (type) { + case IRQ_TYPE_NONE: + printk(KERN_WARNING "No edge setting!\n"); + break; + case IRQ_TYPE_EDGE_RISING: + newvalue = S3C2410_EXTINT_RISEEDGE; + break; + case IRQ_TYPE_EDGE_FALLING: + newvalue = S3C2410_EXTINT_FALLEDGE; + break; + case IRQ_TYPE_EDGE_BOTH: + newvalue = S3C2410_EXTINT_BOTHEDGE; + break; + case IRQ_TYPE_LEVEL_LOW: + newvalue = S3C2410_EXTINT_LOWLEV; + break; + case IRQ_TYPE_LEVEL_HIGH: + newvalue = S3C2410_EXTINT_HILEV; + break; + default: + printk(KERN_ERR "No such irq type %d", type); + return -EINVAL; + } + + shift = (offs / 2) * 4; + mask = 0x7 << shift; + + ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask; + ctrl |= newvalue << shift; + __raw_writel(ctrl, S5P64X0_EINT0CON0); + + /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */ + if (soc_is_s5p6450()) + s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2)); + else + s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2)); + + return 0; +} + +/* + * s5p64x0_irq_demux_eint + * + * This function demuxes the IRQ from the group0 external interrupts, + * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into + * the specific handlers s5p64x0_irq_demux_eintX_Y. + */ +static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end) +{ + u32 status = __raw_readl(S5P64X0_EINT0PEND); + u32 mask = __raw_readl(S5P64X0_EINT0MASK); + unsigned int irq; + + status &= ~mask; + status >>= start; + status &= (1 << (end - start + 1)) - 1; + + for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) { + if (status & 1) + generic_handle_irq(irq); + status >>= 1; + } +} + +static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc) +{ + s5p64x0_irq_demux_eint(0, 3); +} + +static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc) +{ + s5p64x0_irq_demux_eint(4, 11); +} + +static void s5p64x0_irq_demux_eint12_15(unsigned int irq, + struct irq_desc *desc) +{ + s5p64x0_irq_demux_eint(12, 15); +} + +static int s5p64x0_alloc_gc(void) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + + gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE, + S5P_VA_GPIO, handle_level_irq); + if (!gc) { + printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0" + "external interrupts failed\n", __func__); + return -EINVAL; + } + + ct = gc->chip_types; + ct->chip.irq_ack = irq_gc_ack_set_bit; + ct->chip.irq_mask = irq_gc_mask_set_bit; + ct->chip.irq_unmask = irq_gc_mask_clr_bit; + ct->chip.irq_set_type = s5p64x0_irq_eint_set_type; + ct->chip.irq_set_wake = s3c_irqext_wake; + ct->regs.ack = EINT0PEND_OFFSET; + ct->regs.mask = EINT0MASK_OFFSET; + irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST | IRQ_NOPROBE, 0); + return 0; +} + +static int __init s5p64x0_init_irq_eint(void) +{ + int ret = s5p64x0_alloc_gc(); + irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3); + irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11); + irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15); + + return ret; +} +arch_initcall(s5p64x0_init_irq_eint); + +void s5p64x0_restart(char mode, const char *cmd) +{ + if (mode != 's') + arch_wdt_reset(); + + soft_restart(0); +} diff --git a/arch/arm/mach-s5p64x0/common.h b/arch/arm/mach-s5p64x0/common.h new file mode 100644 index 000000000000..f8a60fdc5884 --- /dev/null +++ b/arch/arm/mach-s5p64x0/common.h @@ -0,0 +1,57 @@ +/* + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Common Header for S5P64X0 machines + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_S5P64X0_COMMON_H +#define __ARCH_ARM_MACH_S5P64X0_COMMON_H + +void s5p6440_init_irq(void); +void s5p6450_init_irq(void); +void s5p64x0_init_io(struct map_desc *mach_desc, int size); + +void s5p6440_register_clocks(void); +void s5p6440_setup_clocks(void); + +void s5p6450_register_clocks(void); +void s5p6450_setup_clocks(void); + +void s5p64x0_restart(char mode, const char *cmd); + +#ifdef CONFIG_CPU_S5P6440 + +extern int s5p64x0_init(void); +extern void s5p6440_map_io(void); +extern void s5p6440_init_clocks(int xtal); + +extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +#else +#define s5p6440_init_clocks NULL +#define s5p6440_init_uarts NULL +#define s5p6440_map_io NULL +#define s5p64x0_init NULL +#endif + +#ifdef CONFIG_CPU_S5P6450 + +extern int s5p64x0_init(void); +extern void s5p6450_map_io(void); +extern void s5p6450_init_clocks(int xtal); + +extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +#else +#define s5p6450_init_clocks NULL +#define s5p6450_init_uarts NULL +#define s5p6450_map_io NULL +#define s5p64x0_init NULL +#endif + +#endif /* __ARCH_ARM_MACH_S5P64X0_COMMON_H */ diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c deleted file mode 100644 index ecab40cf19ab..000000000000 --- a/arch/arm/mach-s5p64x0/cpu.c +++ /dev/null @@ -1,215 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/cpu.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/sysdev.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/sched.h> -#include <linux/dma-mapping.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/proc-fns.h> -#include <asm/irq.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/regs-serial.h> -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/clock.h> -#include <plat/s5p6440.h> -#include <plat/s5p6450.h> -#include <plat/adc-core.h> -#include <plat/fb-core.h> - -/* Initial IO mappings */ - -static struct map_desc s5p64x0_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_GPIO, - .pfn = __phys_to_pfn(S5P64X0_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S5P64X0_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S5P64X0_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc s5p6440_iodesc[] __initdata = { - { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S5P6440_PA_UART(0)), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc s5p6450_iodesc[] __initdata = { - { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S5P6450_PA_UART(0)), - .length = SZ_512K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_UART + SZ_512K, - .pfn = __phys_to_pfn(S5P6450_PA_UART(5)), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static void s5p64x0_idle(void) -{ - unsigned long val; - - if (!need_resched()) { - val = __raw_readl(S5P64X0_PWR_CFG); - val &= ~(0x3 << 5); - val |= (0x1 << 5); - __raw_writel(val, S5P64X0_PWR_CFG); - - cpu_do_idle(); - } - local_irq_enable(); -} - -/* - * s5p64x0_map_io - * - * register the standard CPU IO areas - */ - -void __init s5p6440_map_io(void) -{ - /* initialize any device information early */ - s3c_adc_setname("s3c64xx-adc"); - s3c_fb_setname("s5p64x0-fb"); - - iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); - iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); - init_consistent_dma_size(SZ_8M); -} - -void __init s5p6450_map_io(void) -{ - /* initialize any device information early */ - s3c_adc_setname("s3c64xx-adc"); - s3c_fb_setname("s5p64x0-fb"); - - iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); - iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc)); - init_consistent_dma_size(SZ_8M); -} - -/* - * s5p64x0_init_clocks - * - * register and setup the CPU clocks - */ - -void __init s5p6440_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - s5p6440_register_clocks(); - s5p6440_setup_clocks(); -} - -void __init s5p6450_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - s5p6450_register_clocks(); - s5p6450_setup_clocks(); -} - -/* - * s5p64x0_init_irq - * - * register the CPU interrupts - */ - -void __init s5p6440_init_irq(void) -{ - /* S5P6440 supports 2 VIC */ - u32 vic[2]; - - /* - * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)] - * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22] - */ - vic[0] = 0xff800ae7; - vic[1] = 0xffbf23e5; - - s5p_init_irq(vic, ARRAY_SIZE(vic)); -} - -void __init s5p6450_init_irq(void) -{ - /* S5P6450 supports only 2 VIC */ - u32 vic[2]; - - /* - * VIC0 is missing IRQ_VIC0[(13-15), (21-22)] - * VIC1 is missing IRQ VIC1[12, 14, 23] - */ - vic[0] = 0xff9f1fff; - vic[1] = 0xff7fafff; - - s5p_init_irq(vic, ARRAY_SIZE(vic)); -} - -struct sysdev_class s5p64x0_sysclass = { - .name = "s5p64x0-core", -}; - -static struct sys_device s5p64x0_sysdev = { - .cls = &s5p64x0_sysclass, -}; - -static int __init s5p64x0_core_init(void) -{ - return sysdev_class_register(&s5p64x0_sysclass); -} -core_initcall(s5p64x0_core_init); - -int __init s5p64x0_init(void) -{ - printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5p64x0_idle; - - return sysdev_register(&s5p64x0_sysdev); -} diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c deleted file mode 100644 index 1fd9c79c7dbc..000000000000 --- a/arch/arm/mach-s5p64x0/dev-spi.c +++ /dev/null @@ -1,224 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/dev-spi.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <mach/dma.h> -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/regs-clock.h> -#include <mach/spi-clocks.h> - -#include <plat/cpu.h> -#include <plat/s3c64xx-spi.h> -#include <plat/gpio-cfg.h> - -static char *s5p64x0_spi_src_clks[] = { - [S5P64X0_SPI_SRCCLK_PCLK] = "pclk", - [S5P64X0_SPI_SRCCLK_SCLK] = "sclk_spi", -}; - -/* SPI Controller platform_devices */ - -/* Since we emulate multi-cs capability, we do not touch the CS. - * The emulated CS is toggled by board specific mechanism, as it can - * be either some immediate GPIO or some signal out of some other - * chip in between ... or some yet another way. - * We simply do not assume anything about CS. - */ -static int s5p6440_spi_cfg_gpio(struct platform_device *pdev) -{ - unsigned int base; - - switch (pdev->id) { - case 0: - base = S5P6440_GPC(0); - break; - - case 1: - base = S5P6440_GPC(4); - break; - - default: - dev_err(&pdev->dev, "Invalid SPI Controller number!"); - return -EINVAL; - } - - s3c_gpio_cfgall_range(base, 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - - return 0; -} - -static int s5p6450_spi_cfg_gpio(struct platform_device *pdev) -{ - unsigned int base; - - switch (pdev->id) { - case 0: - base = S5P6450_GPC(0); - break; - - case 1: - base = S5P6450_GPC(4); - break; - - default: - dev_err(&pdev->dev, "Invalid SPI Controller number!"); - return -EINVAL; - } - - s3c_gpio_cfgall_range(base, 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - - return 0; -} - -static struct resource s5p64x0_spi0_resource[] = { - [0] = { - .start = S5P64X0_PA_SPI0, - .end = S5P64X0_PA_SPI0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI0_TX, - .end = DMACH_SPI0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI0_RX, - .end = DMACH_SPI0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI0, - .end = IRQ_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5p6440_spi0_pdata = { - .cfg_gpio = s5p6440_spi_cfg_gpio, - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, - .tx_st_done = 25, -}; - -static struct s3c64xx_spi_info s5p6450_spi0_pdata = { - .cfg_gpio = s5p6450_spi_cfg_gpio, - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, - .tx_st_done = 25, -}; - -static u64 spi_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5p64x0_device_spi0 = { - .name = "s3c64xx-spi", - .id = 0, - .num_resources = ARRAY_SIZE(s5p64x0_spi0_resource), - .resource = s5p64x0_spi0_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct resource s5p64x0_spi1_resource[] = { - [0] = { - .start = S5P64X0_PA_SPI1, - .end = S5P64X0_PA_SPI1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI1_TX, - .end = DMACH_SPI1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI1_RX, - .end = DMACH_SPI1_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI1, - .end = IRQ_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5p6440_spi1_pdata = { - .cfg_gpio = s5p6440_spi_cfg_gpio, - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 15, - .tx_st_done = 25, -}; - -static struct s3c64xx_spi_info s5p6450_spi1_pdata = { - .cfg_gpio = s5p6450_spi_cfg_gpio, - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 15, - .tx_st_done = 25, -}; - -struct platform_device s5p64x0_device_spi1 = { - .name = "s3c64xx-spi", - .id = 1, - .num_resources = ARRAY_SIZE(s5p64x0_spi1_resource), - .resource = s5p64x0_spi1_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) -{ - struct s3c64xx_spi_info *pd; - - /* Reject invalid configuration */ - if (!num_cs || src_clk_nr < 0 - || src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) { - printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); - return; - } - - switch (cntrlr) { - case 0: - if (soc_is_s5p6450()) - pd = &s5p6450_spi0_pdata; - else - pd = &s5p6440_spi0_pdata; - - s5p64x0_device_spi0.dev.platform_data = pd; - break; - case 1: - if (soc_is_s5p6450()) - pd = &s5p6450_spi1_pdata; - else - pd = &s5p6440_spi1_pdata; - - s5p64x0_device_spi1.dev.platform_data = pd; - break; - default: - printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", - __func__, cntrlr); - return; - } - - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - pd->src_clk_name = s5p64x0_spi_src_clks[src_clk_nr]; -} diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index 442dd4ad12da..f820c0744405 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -38,176 +38,74 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -struct dma_pl330_peri s5p6440_pdma_peri[22] = { - { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = DMACH_MAX, - }, { - .peri_id = DMACH_MAX, - }, { - .peri_id = (u8)DMACH_PCM0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, +u8 s5p6440_pdma_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_MAX, + DMACH_MAX, + DMACH_PCM0_TX, + DMACH_PCM0_RX, + DMACH_I2S0_TX, + DMACH_I2S0_RX, + DMACH_SPI0_TX, + DMACH_SPI0_RX, + DMACH_MAX, + DMACH_MAX, + DMACH_MAX, + DMACH_MAX, + DMACH_SPI1_TX, + DMACH_SPI1_RX, }; struct dma_pl330_platdata s5p6440_pdma_pdata = { .nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri), - .peri = s5p6440_pdma_peri, + .peri_id = s5p6440_pdma_peri, }; -struct dma_pl330_peri s5p6450_pdma_peri[32] = { - { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART4_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART4_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_USI_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_USI_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_I2S1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PWM, - }, { - .peri_id = (u8)DMACH_UART5_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART5_TX, - .rqtype = MEMTODEV, - }, +u8 s5p6450_pdma_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_UART4_RX, + DMACH_UART4_TX, + DMACH_PCM0_TX, + DMACH_PCM0_RX, + DMACH_I2S0_TX, + DMACH_I2S0_RX, + DMACH_SPI0_TX, + DMACH_SPI0_RX, + DMACH_PCM1_TX, + DMACH_PCM1_RX, + DMACH_PCM2_TX, + DMACH_PCM2_RX, + DMACH_SPI1_TX, + DMACH_SPI1_RX, + DMACH_USI_TX, + DMACH_USI_RX, + DMACH_MAX, + DMACH_I2S1_TX, + DMACH_I2S1_RX, + DMACH_I2S2_TX, + DMACH_I2S2_RX, + DMACH_PWM, + DMACH_UART5_RX, + DMACH_UART5_TX, }; struct dma_pl330_platdata s5p6450_pdma_pdata = { .nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri), - .peri = s5p6450_pdma_peri, + .peri_id = s5p6450_pdma_peri, }; struct amba_device s5p64x0_device_pdma = { @@ -227,10 +125,15 @@ struct amba_device s5p64x0_device_pdma = { static int __init s5p64x0_dma_init(void) { - if (soc_is_s5p6450()) + if (soc_is_s5p6450()) { + dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask); s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata; - else + } else { + dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask); s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata; + } amba_device_register(&s5p64x0_device_pdma, &iomem_resource); diff --git a/arch/arm/mach-s5p64x0/include/mach/entry-macro.S b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S index 10b62b4f8211..fbb246d0a3df 100644 --- a/arch/arm/mach-s5p64x0/include/mach/entry-macro.S +++ b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S @@ -10,7 +10,8 @@ * published by the Free Software Foundation. */ -#include <mach/map.h> -#include <plat/irqs.h> + .macro disable_fiq + .endm -#include <asm/entry-macro-vic2.S> + .macro arch_ret_to_user, tmp1, tmp2 + .endm diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h index 53982db9d259..5b845e849b30 100644 --- a/arch/arm/mach-s5p64x0/include/mach/irqs.h +++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h @@ -141,6 +141,8 @@ #define IRQ_EINT_GROUP(grp, x) (IRQ_EINT_GROUP##grp##_BASE + (x)) +#define IRQ_TIMER_BASE (11) + /* Set the default NR_IRQS */ #define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1) diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h index 4d3ac8a3709d..0c0175dbfa34 100644 --- a/arch/arm/mach-s5p64x0/include/mach/map.h +++ b/arch/arm/mach-s5p64x0/include/mach/map.h @@ -67,6 +67,8 @@ #define S3C_PA_RTC S5P64X0_PA_RTC #define S3C_PA_WDT S5P64X0_PA_WDT #define S3C_PA_FB S5P64X0_PA_FB +#define S3C_PA_SPI0 S5P64X0_PA_SPI0 +#define S3C_PA_SPI1 S5P64X0_PA_SPI1 #define S5P_PA_CHIPID S5P64X0_PA_CHIPID #define S5P_PA_SROMC S5P64X0_PA_SROMC diff --git a/arch/arm/mach-s5p64x0/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h index 60f57532c970..cf26e0954a2f 100644 --- a/arch/arm/mach-s5p64x0/include/mach/system.h +++ b/arch/arm/mach-s5p64x0/include/mach/system.h @@ -13,8 +13,6 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H __FILE__ -#include <plat/system-reset.h> - static void arch_idle(void) { /* nothing here yet */ diff --git a/arch/arm/mach-s5p64x0/include/mach/vmalloc.h b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h deleted file mode 100644 index 38dcc71a03cc..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/vmalloc.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright 2010 Ben Dooks <ben-linux@fluff.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C6400 vmalloc definition -*/ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END 0xF6000000UL - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5p64x0/init.c b/arch/arm/mach-s5p64x0/init.c deleted file mode 100644 index 79833caf8165..000000000000 --- a/arch/arm/mach-s5p64x0/init.c +++ /dev/null @@ -1,73 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/init.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - Init support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> - -#include <mach/map.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/s5p6440.h> -#include <plat/s5p6450.h> -#include <plat/regs-serial.h> - -static struct s3c24xx_uart_clksrc s5p64x0_serial_clocks[] = { - [0] = { - .name = "pclk_low", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "uclk1", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - -/* uart registration process */ - -void __init s5p64x0_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->clocks = s5p64x0_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5p64x0_serial_clocks); - } - } -} - -void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - int uart; - - for (uart = 0; uart < no; uart++) { - s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart); - s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART; - } - - s5p64x0_common_init_uarts(cfg, no); - s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); -} - -void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s5p64x0_common_init_uarts(cfg, no); - s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); -} diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c deleted file mode 100644 index 275dc74f4a7b..000000000000 --- a/arch/arm/mach-s5p64x0/irq-eint.c +++ /dev/null @@ -1,155 +0,0 @@ -/* arch/arm/mach-s5p64x0/irq-eint.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd - * http://www.samsung.com/ - * - * Based on linux/arch/arm/mach-s3c64xx/irq-eint.c - * - * S5P64X0 - Interrupt handling for External Interrupts. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/gpio.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <plat/cpu.h> -#include <plat/regs-irqtype.h> -#include <plat/gpio-cfg.h> -#include <plat/pm.h> - -#include <mach/regs-gpio.h> -#include <mach/regs-clock.h> - -#define eint_offset(irq) ((irq) - IRQ_EINT(0)) - -static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type) -{ - int offs = eint_offset(data->irq); - int shift; - u32 ctrl, mask; - u32 newvalue = 0; - - if (offs > 15) - return -EINVAL; - - switch (type) { - case IRQ_TYPE_NONE: - printk(KERN_WARNING "No edge setting!\n"); - break; - case IRQ_TYPE_EDGE_RISING: - newvalue = S3C2410_EXTINT_RISEEDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - newvalue = S3C2410_EXTINT_FALLEDGE; - break; - case IRQ_TYPE_EDGE_BOTH: - newvalue = S3C2410_EXTINT_BOTHEDGE; - break; - case IRQ_TYPE_LEVEL_LOW: - newvalue = S3C2410_EXTINT_LOWLEV; - break; - case IRQ_TYPE_LEVEL_HIGH: - newvalue = S3C2410_EXTINT_HILEV; - break; - default: - printk(KERN_ERR "No such irq type %d", type); - return -EINVAL; - } - - shift = (offs / 2) * 4; - mask = 0x7 << shift; - - ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask; - ctrl |= newvalue << shift; - __raw_writel(ctrl, S5P64X0_EINT0CON0); - - /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */ - if (soc_is_s5p6450()) - s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2)); - else - s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2)); - - return 0; -} - -/* - * s5p64x0_irq_demux_eint - * - * This function demuxes the IRQ from the group0 external interrupts, - * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into - * the specific handlers s5p64x0_irq_demux_eintX_Y. - */ -static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end) -{ - u32 status = __raw_readl(S5P64X0_EINT0PEND); - u32 mask = __raw_readl(S5P64X0_EINT0MASK); - unsigned int irq; - - status &= ~mask; - status >>= start; - status &= (1 << (end - start + 1)) - 1; - - for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) { - if (status & 1) - generic_handle_irq(irq); - status >>= 1; - } -} - -static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc) -{ - s5p64x0_irq_demux_eint(0, 3); -} - -static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc) -{ - s5p64x0_irq_demux_eint(4, 11); -} - -static void s5p64x0_irq_demux_eint12_15(unsigned int irq, - struct irq_desc *desc) -{ - s5p64x0_irq_demux_eint(12, 15); -} - -static int s5p64x0_alloc_gc(void) -{ - struct irq_chip_generic *gc; - struct irq_chip_type *ct; - - gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE, - S5P_VA_GPIO, handle_level_irq); - if (!gc) { - printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0" - "external interrupts failed\n", __func__); - return -EINVAL; - } - - ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack_set_bit; - ct->chip.irq_mask = irq_gc_mask_set_bit; - ct->chip.irq_unmask = irq_gc_mask_clr_bit; - ct->chip.irq_set_type = s5p64x0_irq_eint_set_type; - ct->chip.irq_set_wake = s3c_irqext_wake; - ct->regs.ack = EINT0PEND_OFFSET; - ct->regs.mask = EINT0MASK_OFFSET; - irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE, - IRQ_NOREQUEST | IRQ_NOPROBE, 0); - return 0; -} - -static int __init s5p64x0_init_irq_eint(void) -{ - int ret = s5p64x0_alloc_gc(); - irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3); - irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11); - irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15); - - return ret; -} -arch_initcall(s5p64x0_init_irq_eint); diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index 4a1250cd1356..a40e325d62c8 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -24,9 +24,11 @@ #include <linux/gpio.h> #include <linux/pwm_backlight.h> #include <linux/fb.h> +#include <linux/mmc/host.h> #include <video/platform_lcd.h> +#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/irq.h> @@ -40,7 +42,6 @@ #include <plat/regs-serial.h> #include <plat/gpio-cfg.h> -#include <plat/s5p6440.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -52,6 +53,9 @@ #include <plat/backlight.h> #include <plat/fb.h> #include <plat/regs-fb.h> +#include <plat/sdhci.h> + +#include "common.h" #define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -161,6 +165,25 @@ static struct platform_device *smdk6440_devices[] __initdata = { &s5p6440_device_iis, &s3c_device_fb, &smdk6440_lcd_lte480wv, + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, +}; + +static struct s3c_sdhci_platdata smdk6440_hsmmc0_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_NONE, +}; + +static struct s3c_sdhci_platdata smdk6440_hsmmc1_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_INTERNAL, +#if defined(CONFIG_S5P64X0_SD_CH1_8BIT) + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata smdk6440_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_NONE, }; static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = { @@ -201,7 +224,7 @@ static struct platform_pwm_backlight_data smdk6440_bl_data = { static void __init smdk6440_map_io(void) { - s5p_init_io(NULL, 0, S5P64X0_SYS_ID); + s5p64x0_init_io(NULL, 0); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs)); s5p_set_timer_source(S5P_PWM3, S5P_PWM4); @@ -234,6 +257,10 @@ static void __init smdk6440_machine_init(void) s5p6440_set_lcd_interface(); s3c_fb_set_platdata(&smdk6440_lcd_pdata); + s3c_sdhci0_set_platdata(&smdk6440_hsmmc0_pdata); + s3c_sdhci1_set_platdata(&smdk6440_hsmmc1_pdata); + s3c_sdhci2_set_platdata(&smdk6440_hsmmc2_pdata); + platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices)); } @@ -242,7 +269,9 @@ MACHINE_START(SMDK6440, "SMDK6440") .atag_offset = 0x100, .init_irq = s5p6440_init_irq, + .handle_irq = vic_handle_irq, .map_io = smdk6440_map_io, .init_machine = smdk6440_machine_init, .timer = &s5p_timer, + .restart = s5p64x0_restart, MACHINE_END diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index 0ab129ecf009..efb69e2f2afe 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -24,9 +24,11 @@ #include <linux/gpio.h> #include <linux/pwm_backlight.h> #include <linux/fb.h> +#include <linux/mmc/host.h> #include <video/platform_lcd.h> +#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/irq.h> @@ -40,7 +42,6 @@ #include <plat/regs-serial.h> #include <plat/gpio-cfg.h> -#include <plat/s5p6450.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -52,6 +53,9 @@ #include <plat/backlight.h> #include <plat/fb.h> #include <plat/regs-fb.h> +#include <plat/sdhci.h> + +#include "common.h" #define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -179,10 +183,28 @@ static struct platform_device *smdk6450_devices[] __initdata = { &s5p6450_device_iis0, &s3c_device_fb, &smdk6450_lcd_lte480wv, - + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, /* s5p6450_device_spi0 will be added */ }; +static struct s3c_sdhci_platdata smdk6450_hsmmc0_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_NONE, +}; + +static struct s3c_sdhci_platdata smdk6450_hsmmc1_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_NONE, +#if defined(CONFIG_S5P64X0_SD_CH1_8BIT) + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata smdk6450_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_NONE, +}; + static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = { .flags = 0, .slave_addr = 0x10, @@ -221,7 +243,7 @@ static struct platform_pwm_backlight_data smdk6450_bl_data = { static void __init smdk6450_map_io(void) { - s5p_init_io(NULL, 0, S5P64X0_SYS_ID); + s5p64x0_init_io(NULL, 0); s3c24xx_init_clocks(19200000); s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs)); s5p_set_timer_source(S5P_PWM3, S5P_PWM4); @@ -254,6 +276,10 @@ static void __init smdk6450_machine_init(void) s5p6450_set_lcd_interface(); s3c_fb_set_platdata(&smdk6450_lcd_pdata); + s3c_sdhci0_set_platdata(&smdk6450_hsmmc0_pdata); + s3c_sdhci1_set_platdata(&smdk6450_hsmmc1_pdata); + s3c_sdhci2_set_platdata(&smdk6450_hsmmc2_pdata); + platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices)); } @@ -262,7 +288,9 @@ MACHINE_START(SMDK6450, "SMDK6450") .atag_offset = 0x100, .init_irq = s5p6450_init_irq, + .handle_irq = vic_handle_irq, .map_io = smdk6450_map_io, .init_machine = smdk6450_machine_init, .timer = &s5p_timer, + .restart = s5p64x0_restart, MACHINE_END diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c index 69927243d25f..23f9b22439c9 100644 --- a/arch/arm/mach-s5p64x0/pm.c +++ b/arch/arm/mach-s5p64x0/pm.c @@ -160,7 +160,7 @@ static void s5p64x0_pm_prepare(void) } -static int s5p64x0_pm_add(struct sys_device *sysdev) +static int s5p64x0_pm_add(struct device *dev) { pm_cpu_prep = s5p64x0_pm_prepare; pm_cpu_sleep = s5p64x0_cpu_suspend; @@ -169,15 +169,17 @@ static int s5p64x0_pm_add(struct sys_device *sysdev) return 0; } -static struct sysdev_driver s5p64x0_pm_driver = { - .add = s5p64x0_pm_add, +static struct subsys_interface s5p64x0_pm_interface = { + .name = "s5p64x0_pm", + .subsys = &s5p64x0_subsys, + .add_dev = s5p64x0_pm_add, }; static __init int s5p64x0_pm_drvinit(void) { s3c_pm_init(); - return sysdev_driver_register(&s5p64x0_sysclass, &s5p64x0_pm_driver); + return subsys_interface_register(&s5p64x0_pm_interface); } arch_initcall(s5p64x0_pm_drvinit); diff --git a/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c b/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c new file mode 100644 index 000000000000..8410af0d12bf --- /dev/null +++ b/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c @@ -0,0 +1,104 @@ +/* linux/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P64X0 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/regs-gpio.h> +#include <mach/regs-clock.h> + +#include <plat/gpio-cfg.h> +#include <plat/sdhci.h> +#include <plat/cpu.h> + +void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) +{ + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; + + /* Set all the necessary GPG pins to special-function 2 */ + if (soc_is_s5p6450()) + s3c_gpio_cfgrange_nopull(S5P6450_GPG(0), 2 + width, + S3C_GPIO_SFN(2)); + else + s3c_gpio_cfgrange_nopull(S5P6440_GPG(0), 2 + width, + S3C_GPIO_SFN(2)); + + /* Set GPG[6] pin to special-function 2 - MMC0 CDn */ + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + if (soc_is_s5p6450()) { + s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(2)); + } else { + s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(2)); + } + } +} + +void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) +{ + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; + + /* Set GPH[0:1] pins to special-function 2 - CLK and CMD */ + if (soc_is_s5p6450()) + s3c_gpio_cfgrange_nopull(S5P6450_GPH(0), 2, S3C_GPIO_SFN(2)); + else + s3c_gpio_cfgrange_nopull(S5P6440_GPH(0), 2 , S3C_GPIO_SFN(2)); + + switch (width) { + case 8: + /* Set data pins GPH[6:9] special-function 2 */ + if (soc_is_s5p6450()) + s3c_gpio_cfgrange_nopull(S5P6450_GPH(6), 4, + S3C_GPIO_SFN(2)); + else + s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4, + S3C_GPIO_SFN(2)); + case 4: + /* set data pins GPH[2:5] special-function 2 */ + if (soc_is_s5p6450()) + s3c_gpio_cfgrange_nopull(S5P6450_GPH(2), 4, + S3C_GPIO_SFN(2)); + else + s3c_gpio_cfgrange_nopull(S5P6440_GPH(2), 4, + S3C_GPIO_SFN(2)); + default: + break; + } + + /* Set GPG[6] pin to special-funtion 3 : MMC1 CDn */ + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + if (soc_is_s5p6450()) { + s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(3)); + } else { + s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(3)); + } + } +} + +void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) +{ + /* Set GPC[4:5] pins to special-function 3 - CLK and CMD */ + s3c_gpio_cfgrange_nopull(S5P6440_GPC(4), 2, S3C_GPIO_SFN(3)); + + /* Set data pins GPH[6:9] pins to special-function 3 */ + s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4, S3C_GPIO_SFN(3)); +} + +void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) +{ + /* Set all the necessary GPG pins to special-function 3 */ + s3c_gpio_cfgrange_nopull(S5P6450_GPG(7), 2 + width, S3C_GPIO_SFN(3)); +} diff --git a/arch/arm/mach-s5p64x0/setup-spi.c b/arch/arm/mach-s5p64x0/setup-spi.c new file mode 100644 index 000000000000..e9b841240352 --- /dev/null +++ b/arch/arm/mach-s5p64x0/setup-spi.c @@ -0,0 +1,55 @@ +/* linux/arch/arm/mach-s5p64x0/setup-spi.c + * + * Copyright (C) 2011 Samsung Electronics Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <plat/gpio-cfg.h> +#include <plat/cpu.h> +#include <plat/s3c64xx-spi.h> + +#ifdef CONFIG_S3C64XX_DEV_SPI0 +struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = { + .fifo_lvl_mask = 0x1ff, + .rx_lvl_offset = 15, + .tx_st_done = 25, +}; + +int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) +{ + if (soc_is_s5p6450()) + s3c_gpio_cfgall_range(S5P6450_GPC(0), 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + else + s3c_gpio_cfgall_range(S5P6440_GPC(0), 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; +} +#endif + +#ifdef CONFIG_S3C64XX_DEV_SPI1 +struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = { + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 15, + .tx_st_done = 25, +}; + +int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) +{ + if (soc_is_s5p6450()) + s3c_gpio_cfgall_range(S5P6450_GPC(4), 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + else + s3c_gpio_cfgall_range(S5P6440_GPC(4), 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; +} +#endif diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index e538a4c67e9c..75a26eaf2633 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -45,6 +45,11 @@ config S5PC100_SETUP_SDHCI_GPIO help Common setup code for SDHCI gpio. +config S5PC100_SETUP_SPI + bool + help + Common setup code for SPI GPIO configurations. + config MACH_SMDKC100 bool "SMDKC100" select CPU_S5PC100 diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile index a5e6e608b498..118c711f74e8 100644 --- a/arch/arm/mach-s5pc100/Makefile +++ b/arch/arm/mach-s5pc100/Makefile @@ -9,28 +9,24 @@ obj-m := obj-n := obj- := -# Core support for S5PC100 system +# Core -obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o -obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o -obj-$(CONFIG_CPU_S5PC100) += dma.o +obj-y += common.o clock.o -# Helper and device support - -obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o -obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o -obj-$(CONFIG_S5PC100_SETUP_IDE) += setup-ide.o -obj-$(CONFIG_S5PC100_SETUP_KEYPAD) += setup-keypad.o -obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o -obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o - -# device support -obj-y += dev-audio.o -obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o +obj-y += dma.o # machine support obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o # device support + obj-y += dev-audio.o + +obj-y += setup-i2c0.o +obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o +obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S5PC100_SETUP_IDE) += setup-ide.o +obj-$(CONFIG_S5PC100_SETUP_KEYPAD) += setup-keypad.o +obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o +obj-$(CONFIG_S5PC100_SETUP_SPI) += setup-spi.o diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c index 8d47709da713..247194dd366c 100644 --- a/arch/arm/mach-s5pc100/clock.c +++ b/arch/arm/mach-s5pc100/clock.c @@ -27,7 +27,8 @@ #include <plat/pll.h> #include <plat/s5p-clock.h> #include <plat/clock-clksrc.h> -#include <plat/s5pc100.h> + +#include "common.h" static struct clk s5p_clk_otgphy = { .name = "otg_phy", @@ -426,24 +427,6 @@ static struct clk init_clocks_off[] = { .enable = s5pc100_d0_2_ctrl, .ctrlbit = (1 << 1), }, { - .name = "hsmmc", - .devname = "s3c-sdhci.2", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_0_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_0_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_0_ctrl, - .ctrlbit = (1 << 5), - }, { .name = "modemif", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, @@ -673,24 +656,6 @@ static struct clk init_clocks_off[] = { .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 8), }, { - .name = "spi_48m", - .devname = "s3c64xx-spi.0", - .parent = &clk_mout_48m.clk, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "spi_48m", - .devname = "s3c64xx-spi.1", - .parent = &clk_mout_48m.clk, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "spi_48m", - .devname = "s3c64xx-spi.2", - .parent = &clk_mout_48m.clk, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = (1 << 9), - }, { .name = "mmc_48m", .devname = "s3c-sdhci.0", .parent = &clk_mout_48m.clk, @@ -711,6 +676,54 @@ static struct clk init_clocks_off[] = { }, }; +static struct clk clk_hsmmc2 = { + .name = "hsmmc", + .devname = "s3c-sdhci.2", + .parent = &clk_div_d1_bus.clk, + .enable = s5pc100_d1_0_ctrl, + .ctrlbit = (1 << 7), +}; + +static struct clk clk_hsmmc1 = { + .name = "hsmmc", + .devname = "s3c-sdhci.1", + .parent = &clk_div_d1_bus.clk, + .enable = s5pc100_d1_0_ctrl, + .ctrlbit = (1 << 6), +}; + +static struct clk clk_hsmmc0 = { + .name = "hsmmc", + .devname = "s3c-sdhci.0", + .parent = &clk_div_d1_bus.clk, + .enable = s5pc100_d1_0_ctrl, + .ctrlbit = (1 << 5), +}; + +static struct clk clk_48m_spi0 = { + .name = "spi_48m", + .devname = "s3c64xx-spi.0", + .parent = &clk_mout_48m.clk, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = (1 << 7), +}; + +static struct clk clk_48m_spi1 = { + .name = "spi_48m", + .devname = "s3c64xx-spi.1", + .parent = &clk_mout_48m.clk, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = (1 << 8), +}; + +static struct clk clk_48m_spi2 = { + .name = "spi_48m", + .devname = "s3c64xx-spi.2", + .parent = &clk_mout_48m.clk, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = (1 << 9), +}; + static struct clk clk_vclk54m = { .name = "vclk_54m", .rate = 54000000, @@ -929,49 +942,6 @@ static struct clksrc_clk clk_sclk_spdif = { static struct clksrc_clk clksrcs[] = { { .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.0", - .ctrlbit = (1 << 4), - .enable = s5pc100_sclk0_ctrl, - - }, - .sources = &clk_src_group1, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.1", - .ctrlbit = (1 << 5), - .enable = s5pc100_sclk0_ctrl, - - }, - .sources = &clk_src_group1, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.2", - .ctrlbit = (1 << 6), - .enable = s5pc100_sclk0_ctrl, - - }, - .sources = &clk_src_group1, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .ctrlbit = (1 << 3), - .enable = s5pc100_sclk0_ctrl, - - }, - .sources = &clk_src_group2, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, - }, { - .clk = { .name = "sclk_mixer", .ctrlbit = (1 << 6), .enable = s5pc100_sclk0_ctrl, @@ -1024,39 +994,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 }, }, { .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.0", - .ctrlbit = (1 << 12), - .enable = s5pc100_sclk1_ctrl, - - }, - .sources = &clk_src_mmc0, - .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.1", - .ctrlbit = (1 << 13), - .enable = s5pc100_sclk1_ctrl, - - }, - .sources = &clk_src_mmc12, - .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.2", - .ctrlbit = (1 << 14), - .enable = s5pc100_sclk1_ctrl, - - }, - .sources = &clk_src_mmc12, - .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 }, - }, { - .clk = { .name = "sclk_irda", .ctrlbit = (1 << 10), .enable = s5pc100_sclk0_ctrl, @@ -1098,6 +1035,89 @@ static struct clksrc_clk clksrcs[] = { }, }; +static struct clksrc_clk clk_sclk_uart = { + .clk = { + .name = "uclk1", + .ctrlbit = (1 << 3), + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clk_src_group2, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc0 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.0", + .ctrlbit = (1 << 12), + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clk_src_mmc0, + .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc1 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.1", + .ctrlbit = (1 << 13), + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clk_src_mmc12, + .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc2 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.2", + .ctrlbit = (1 << 14), + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clk_src_mmc12, + .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_spi0 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.0", + .ctrlbit = (1 << 4), + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clk_src_group1, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_spi1 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.1", + .ctrlbit = (1 << 5), + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clk_src_group1, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_spi2 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.2", + .ctrlbit = (1 << 6), + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clk_src_group1, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 }, +}; + /* Clock initialisation code */ static struct clksrc_clk *sysclks[] = { &clk_mout_apll, @@ -1127,6 +1147,25 @@ static struct clksrc_clk *sysclks[] = { &clk_sclk_spdif, }; +static struct clk *clk_cdev[] = { + &clk_hsmmc0, + &clk_hsmmc1, + &clk_hsmmc2, + &clk_48m_spi0, + &clk_48m_spi1, + &clk_48m_spi2, +}; + +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uart, + &clk_sclk_mmc0, + &clk_sclk_mmc1, + &clk_sclk_mmc2, + &clk_sclk_spi0, + &clk_sclk_spi1, + &clk_sclk_spi2, +}; + void __init_or_cpufreq s5pc100_setup_clocks(void) { unsigned long xtal; @@ -1266,6 +1305,24 @@ static struct clk *clks[] __initdata = { &clk_pcmcdclk1, }; +static struct clk_lookup s5pc100_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uart.clk), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), + CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), + CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_48m_spi0), + CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_sclk_spi0.clk), + CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_48m_spi1), + CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_sclk_spi1.clk), + CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk1", &clk_48m_spi2), + CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk2", &clk_sclk_spi2.clk), +}; + void __init s5pc100_register_clocks(void) { int ptr; @@ -1277,9 +1334,16 @@ void __init s5pc100_register_clocks(void) s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) + s3c_register_clksrc(clksrc_cdev[ptr], 1); s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(s5pc100_clk_lookup, ARRAY_SIZE(s5pc100_clk_lookup)); + + s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); + for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++) + s3c_disable_clocks(clk_cdev[ptr], 1); s3c24xx_register_clock(&dummy_apb_pclk); diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/common.c index fd2708e7d8a9..c9095730a7f5 100644 --- a/arch/arm/mach-s5pc100/cpu.c +++ b/arch/arm/mach-s5pc100/common.c @@ -1,17 +1,16 @@ -/* linux/arch/arm/mach-s5pc100/cpu.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. +/* + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> * - * Based on mach-s3c6410/cpu.c + * Common Codes for S5PC100 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -*/ + */ #include <linux/kernel.h> #include <linux/types.h> @@ -21,40 +20,78 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/io.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/sched.h> +#include <asm/irq.h> +#include <asm/proc-fns.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/proc-fns.h> - -#include <mach/hardware.h> #include <mach/map.h> -#include <asm/irq.h> - -#include <plat/regs-serial.h> +#include <mach/hardware.h> #include <mach/regs-clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/clock.h> -#include <plat/ata-core.h> -#include <plat/iic-core.h> #include <plat/sdhci.h> #include <plat/adc-core.h> -#include <plat/onenand-core.h> +#include <plat/ata-core.h> #include <plat/fb-core.h> +#include <plat/iic-core.h> +#include <plat/onenand-core.h> +#include <plat/regs-serial.h> +#include <plat/watchdog-reset.h> + +#include "common.h" + +static const char name_s5pc100[] = "S5PC100"; -#include <plat/s5pc100.h> +static struct cpu_table cpu_ids[] __initdata = { + { + .idcode = S5PC100_CPU_ID, + .idmask = S5PC100_CPU_MASK, + .map_io = s5pc100_map_io, + .init_clocks = s5pc100_init_clocks, + .init_uarts = s5pc100_init_uarts, + .init = s5pc100_init, + .name = name_s5pc100, + }, +}; /* Initial IO mappings */ static struct map_desc s5pc100_iodesc[] __initdata = { { + .virtual = (unsigned long)S5P_VA_CHIPID, + .pfn = __phys_to_pfn(S5PC100_PA_CHIPID), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_SYS, + .pfn = __phys_to_pfn(S5PC100_PA_SYSCON), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_TIMER, + .pfn = __phys_to_pfn(S5PC100_PA_TIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_WATCHDOG, + .pfn = __phys_to_pfn(S5PC100_PA_WATCHDOG), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SROMC, + .pfn = __phys_to_pfn(S5PC100_PA_SROMC), + .length = SZ_4K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5P_VA_SYSTIMER, .pfn = __phys_to_pfn(S5PC100_PA_SYSTIMER), .length = SZ_16K, @@ -100,15 +137,27 @@ static void s5pc100_idle(void) local_irq_enable(); } -/* s5pc100_map_io +/* + * s5pc100_map_io * - * register the standard cpu IO areas -*/ + * register the standard CPU IO areas + */ -void __init s5pc100_map_io(void) +void __init s5pc100_init_io(struct map_desc *mach_desc, int size) { + /* initialize the io descriptors we need for initialization */ iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc)); + if (mach_desc) + iotable_init(mach_desc, size); + + /* detect cpu id and rev. */ + s5p_init_cpu(S5P_VA_CHIPID); + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); +} + +void __init s5pc100_map_io(void) +{ /* initialise device information early */ s5pc100_default_sdhci0(); s5pc100_default_sdhci1(); @@ -143,19 +192,19 @@ void __init s5pc100_init_irq(void) s5p_init_irq(vic, ARRAY_SIZE(vic)); } -static struct sysdev_class s5pc100_sysclass = { - .name = "s5pc100-core", +static struct bus_type s5pc100_subsys = { + .name = "s5pc100-core", + .dev_name = "s5pc100-core", }; -static struct sys_device s5pc100_sysdev = { - .cls = &s5pc100_sysclass, +static struct device s5pc100_dev = { + .bus = &s5pc100_subsys, }; static int __init s5pc100_core_init(void) { - return sysdev_class_register(&s5pc100_sysclass); + return subsys_system_register(&s5pc100_subsys, NULL); } - core_initcall(s5pc100_core_init); int __init s5pc100_init(void) @@ -165,5 +214,20 @@ int __init s5pc100_init(void) /* set idle function */ pm_idle = s5pc100_idle; - return sysdev_register(&s5pc100_sysdev); + return device_register(&s5pc100_dev); +} + +/* uart registration process */ + +void __init s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); +} + +void s5pc100_restart(char mode, const char *cmd) +{ + if (mode != 's') + arch_wdt_reset(); + + soft_restart(0); } diff --git a/arch/arm/mach-s5pc100/common.h b/arch/arm/mach-s5pc100/common.h new file mode 100644 index 000000000000..9fbd3ae2b401 --- /dev/null +++ b/arch/arm/mach-s5pc100/common.h @@ -0,0 +1,37 @@ +/* + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Common Header for S5PC100 machines + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_S5PC100_COMMON_H +#define __ARCH_ARM_MACH_S5PC100_COMMON_H + +void s5pc100_init_io(struct map_desc *mach_desc, int size); +void s5pc100_init_irq(void); + +void s5pc100_register_clocks(void); +void s5pc100_setup_clocks(void); + +void s5pc100_restart(char mode, const char *cmd); + +#ifdef CONFIG_CPU_S5PC100 + +extern int s5pc100_init(void); +extern void s5pc100_map_io(void); +extern void s5pc100_init_clocks(int xtal); +extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +#else +#define s5pc100_init_clocks NULL +#define s5pc100_init_uarts NULL +#define s5pc100_map_io NULL +#define s5pc100_init NULL +#endif + +#endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */ diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c deleted file mode 100644 index e5d6c4dceb56..000000000000 --- a/arch/arm/mach-s5pc100/dev-spi.c +++ /dev/null @@ -1,227 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/dev-spi.c - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <mach/dma.h> -#include <mach/map.h> -#include <mach/spi-clocks.h> -#include <mach/irqs.h> - -#include <plat/s3c64xx-spi.h> -#include <plat/gpio-cfg.h> -#include <plat/irqs.h> - -static char *spi_src_clks[] = { - [S5PC100_SPI_SRCCLK_PCLK] = "pclk", - [S5PC100_SPI_SRCCLK_48M] = "spi_48m", - [S5PC100_SPI_SRCCLK_SPIBUS] = "spi_bus", -}; - -/* SPI Controller platform_devices */ - -/* Since we emulate multi-cs capability, we do not touch the CS. - * The emulated CS is toggled by board specific mechanism, as it can - * be either some immediate GPIO or some signal out of some other - * chip in between ... or some yet another way. - * We simply do not assume anything about CS. - */ -static int s5pc100_spi_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgall_range(S5PC100_GPB(0), 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - break; - - case 1: - s3c_gpio_cfgall_range(S5PC100_GPB(4), 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - break; - - case 2: - s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3)); - s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP); - s3c_gpio_cfgall_range(S5PC100_GPB(2), 2, - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); - break; - - default: - dev_err(&pdev->dev, "Invalid SPI Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct resource s5pc100_spi0_resource[] = { - [0] = { - .start = S5PC100_PA_SPI0, - .end = S5PC100_PA_SPI0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI0_TX, - .end = DMACH_SPI0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI0_RX, - .end = DMACH_SPI0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI0, - .end = IRQ_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5pc100_spi0_pdata = { - .cfg_gpio = s5pc100_spi_cfg_gpio, - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 13, - .high_speed = 1, - .tx_st_done = 21, -}; - -static u64 spi_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5pc100_device_spi0 = { - .name = "s3c64xx-spi", - .id = 0, - .num_resources = ARRAY_SIZE(s5pc100_spi0_resource), - .resource = s5pc100_spi0_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pc100_spi0_pdata, - }, -}; - -static struct resource s5pc100_spi1_resource[] = { - [0] = { - .start = S5PC100_PA_SPI1, - .end = S5PC100_PA_SPI1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI1_TX, - .end = DMACH_SPI1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI1_RX, - .end = DMACH_SPI1_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI1, - .end = IRQ_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5pc100_spi1_pdata = { - .cfg_gpio = s5pc100_spi_cfg_gpio, - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 13, - .high_speed = 1, - .tx_st_done = 21, -}; - -struct platform_device s5pc100_device_spi1 = { - .name = "s3c64xx-spi", - .id = 1, - .num_resources = ARRAY_SIZE(s5pc100_spi1_resource), - .resource = s5pc100_spi1_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pc100_spi1_pdata, - }, -}; - -static struct resource s5pc100_spi2_resource[] = { - [0] = { - .start = S5PC100_PA_SPI2, - .end = S5PC100_PA_SPI2 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI2_TX, - .end = DMACH_SPI2_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI2_RX, - .end = DMACH_SPI2_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI2, - .end = IRQ_SPI2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5pc100_spi2_pdata = { - .cfg_gpio = s5pc100_spi_cfg_gpio, - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 13, - .high_speed = 1, - .tx_st_done = 21, -}; - -struct platform_device s5pc100_device_spi2 = { - .name = "s3c64xx-spi", - .id = 2, - .num_resources = ARRAY_SIZE(s5pc100_spi2_resource), - .resource = s5pc100_spi2_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pc100_spi2_pdata, - }, -}; - -void __init s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) -{ - struct s3c64xx_spi_info *pd; - - /* Reject invalid configuration */ - if (!num_cs || src_clk_nr < 0 - || src_clk_nr > S5PC100_SPI_SRCCLK_SPIBUS) { - printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); - return; - } - - switch (cntrlr) { - case 0: - pd = &s5pc100_spi0_pdata; - break; - case 1: - pd = &s5pc100_spi1_pdata; - break; - case 2: - pd = &s5pc100_spi2_pdata; - break; - default: - printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", - __func__, cntrlr); - return; - } - - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - pd->src_clk_name = spi_src_clks[src_clk_nr]; -} diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c index 065a087f5a8b..c841f4d313f2 100644 --- a/arch/arm/mach-s5pc100/dma.c +++ b/arch/arm/mach-s5pc100/dma.c @@ -35,100 +35,42 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -struct dma_pl330_peri pdma0_peri[30] = { - { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = DMACH_IRDA, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0S_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_AC97_MICIN, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_AC97_PCMIN, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_AC97_PCMOUT, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_EXTERNAL, - }, { - .peri_id = (u8)DMACH_PWM, - }, { - .peri_id = (u8)DMACH_SPDIF, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_HSI_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_HSI_TX, - .rqtype = MEMTODEV, - }, +u8 pdma0_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_IRDA, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S0S_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_I2S2_RX, + DMACH_I2S2_TX, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_SPI2_RX, + DMACH_SPI2_TX, + DMACH_AC97_MICIN, + DMACH_AC97_PCMIN, + DMACH_AC97_PCMOUT, + DMACH_EXTERNAL, + DMACH_PWM, + DMACH_SPDIF, + DMACH_HSI_RX, + DMACH_HSI_TX, }; struct dma_pl330_platdata s5pc100_pdma0_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma0_peri), - .peri = pdma0_peri, + .peri_id = pdma0_peri, }; struct amba_device s5pc100_device_pdma0 = { @@ -147,98 +89,42 @@ struct amba_device s5pc100_device_pdma0 = { .periphid = 0x00041330, }; -struct dma_pl330_peri pdma1_peri[30] = { - { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = DMACH_IRDA, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0S_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MSM_REQ0, - }, { - .peri_id = (u8)DMACH_MSM_REQ1, - }, { - .peri_id = (u8)DMACH_MSM_REQ2, - }, { - .peri_id = (u8)DMACH_MSM_REQ3, - }, +u8 pdma1_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_IRDA, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S0S_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_I2S2_RX, + DMACH_I2S2_TX, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_SPI2_RX, + DMACH_SPI2_TX, + DMACH_PCM0_RX, + DMACH_PCM0_TX, + DMACH_PCM1_RX, + DMACH_PCM1_TX, + DMACH_MSM_REQ0, + DMACH_MSM_REQ1, + DMACH_MSM_REQ2, + DMACH_MSM_REQ3, }; struct dma_pl330_platdata s5pc100_pdma1_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma1_peri), - .peri = pdma1_peri, + .peri_id = pdma1_peri, }; struct amba_device s5pc100_device_pdma1 = { @@ -259,7 +145,12 @@ struct amba_device s5pc100_device_pdma1 = { static int __init s5pc100_dma_init(void) { + dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask); amba_device_register(&s5pc100_device_pdma0, &iomem_resource); + + dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask); amba_device_register(&s5pc100_device_pdma1, &iomem_resource); return 0; diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S index ba76af052c81..b8c242edfa22 100644 --- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S @@ -12,39 +12,14 @@ * warranty of any kind, whether express or implied. */ -#include <asm/hardware/vic.h> -#include <mach/map.h> -#include <plat/irqs.h> - .macro disable_fiq .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =VA_VIC0 .endm .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - @ check the vic0 - mov \irqnr, # S5P_IRQ_OFFSET + 31 - ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] - teq \irqstat, #0 - - @ otherwise try vic1 - addeq \tmp, \base, #(VA_VIC1 - VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - @ otherwise try vic2 - addeq \tmp, \base, #(VA_VIC2 - VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat .endm diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h index d2eb4757381f..2870f12c7926 100644 --- a/arch/arm/mach-s5pc100/include/mach/irqs.h +++ b/arch/arm/mach-s5pc100/include/mach/irqs.h @@ -97,6 +97,8 @@ #define IRQ_SDMFIQ S5P_IRQ_VIC2(31) #define IRQ_VIC_END S5P_IRQ_VIC2(31) +#define IRQ_TIMER_BASE (11) + #define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) #define S5P_EINT_BASE2 (IRQ_VIC_END + 1) diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h index ccbe6b767f7d..54bc4f82e17a 100644 --- a/arch/arm/mach-s5pc100/include/mach/map.h +++ b/arch/arm/mach-s5pc100/include/mach/map.h @@ -100,6 +100,9 @@ #define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG #define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY #define S3C_PA_WDT S5PC100_PA_WATCHDOG +#define S3C_PA_SPI0 S5PC100_PA_SPI0 +#define S3C_PA_SPI1 S5PC100_PA_SPI1 +#define S3C_PA_SPI2 S5PC100_PA_SPI2 #define S5P_PA_CHIPID S5PC100_PA_CHIPID #define S5P_PA_FIMC0 S5PC100_PA_FIMC0 diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h index a9ea57c06600..afc96c298518 100644 --- a/arch/arm/mach-s5pc100/include/mach/system.h +++ b/arch/arm/mach-s5pc100/include/mach/system.h @@ -11,8 +11,6 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H __FILE__ -#include <plat/system-reset.h> - static void arch_idle(void) { /* nothing here yet */ diff --git a/arch/arm/mach-s5pc100/include/mach/vmalloc.h b/arch/arm/mach-s5pc100/include/mach/vmalloc.h deleted file mode 100644 index 44c8e5726d9d..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/vmalloc.h +++ /dev/null @@ -1,17 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/vmalloc.h - * - * Copyright 2010 Ben Dooks <ben-linux@fluff.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C6400 vmalloc definition -*/ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END 0xF6000000UL - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5pc100/init.c b/arch/arm/mach-s5pc100/init.c deleted file mode 100644 index 19d7b523c137..000000000000 --- a/arch/arm/mach-s5pc100/init.c +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/arch/arm/plat-s5pc100/s5pc100-init.c - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/s5pc100.h> - -/* uart registration process */ -void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); -} diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 26f5c91c9427..674d22992f3c 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -25,6 +25,7 @@ #include <linux/input.h> #include <linux/pwm_backlight.h> +#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -42,7 +43,6 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/s5pc100.h> #include <plat/fb.h> #include <plat/iic.h> #include <plat/ata.h> @@ -53,6 +53,8 @@ #include <plat/backlight.h> #include <plat/regs-fb-v4.h> +#include "common.h" + /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -215,7 +217,7 @@ static struct platform_pwm_backlight_data smdkc100_bl_data = { static void __init smdkc100_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s5pc100_init_io(NULL, 0); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs)); } @@ -250,7 +252,9 @@ MACHINE_START(SMDKC100, "SMDKC100") /* Maintainer: Byungho Min <bhmin@samsung.com> */ .atag_offset = 0x100, .init_irq = s5pc100_init_irq, + .handle_irq = vic_handle_irq, .map_io = smdkc100_map_io, .init_machine = smdkc100_machine_init, .timer = &s3c24xx_timer, + .restart = s5pc100_restart, MACHINE_END diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c deleted file mode 100644 index 6418c6e8a7b7..000000000000 --- a/arch/arm/mach-s5pc100/setup-sdhci.c +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/setup-sdhci.c - * - * Copyright 2008 Samsung Electronics - * - * S5PC100 - Helper functions for settign up SDHCI device(s) (HSMMC) - * - * Based on mach-s3c6410/setup-sdhci.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/types.h> - -/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ - -char *s5pc100_hsmmc_clksrcs[4] = { - [0] = "hsmmc", /* HCLK */ - /* [1] = "hsmmc", - duplicate HCLK entry */ - [2] = "sclk_mmc", /* mmc_bus */ - /* [3] = "48m", - note not successfully used yet */ -}; diff --git a/arch/arm/mach-s5pc100/setup-spi.c b/arch/arm/mach-s5pc100/setup-spi.c new file mode 100644 index 000000000000..431a6f747caa --- /dev/null +++ b/arch/arm/mach-s5pc100/setup-spi.c @@ -0,0 +1,65 @@ +/* linux/arch/arm/mach-s5pc100/setup-spi.c + * + * Copyright (C) 2011 Samsung Electronics Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <linux/platform_device.h> + +#include <plat/gpio-cfg.h> +#include <plat/s3c64xx-spi.h> + +#ifdef CONFIG_S3C64XX_DEV_SPI0 +struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = { + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 13, + .high_speed = 1, + .tx_st_done = 21, +}; + +int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgall_range(S5PC100_GPB(0), 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; +} +#endif + +#ifdef CONFIG_S3C64XX_DEV_SPI1 +struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = { + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 13, + .high_speed = 1, + .tx_st_done = 21, +}; + +int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgall_range(S5PC100_GPB(4), 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; +} +#endif + +#ifdef CONFIG_S3C64XX_DEV_SPI2 +struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = { + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 13, + .high_speed = 1, + .tx_st_done = 21, +}; + +int s3c64xx_spi2_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3)); + s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PC100_GPB(2), 2, + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); + return 0; +} +#endif diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 646057ab2e4c..2cdc42e838b8 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -60,6 +60,11 @@ config S5PV210_SETUP_FIMC help Common setup code for the camera interfaces. +config S5PV210_SETUP_SPI + bool + help + Common setup code for SPI GPIO configurations. + menu "S5PC110 Machines" config MACH_AQUILA diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 009fbe53df96..76a121dd52b4 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -10,30 +10,32 @@ obj-m := obj-n := obj- := -# Core support for S5PV210 system +# Core + +obj-y += common.o clock.o -obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o -obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o obj-$(CONFIG_PM) += pm.o +obj-y += dma.o + # machine support obj-$(CONFIG_MACH_AQUILA) += mach-aquila.o -obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o -obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o obj-$(CONFIG_MACH_GONI) += mach-goni.o +obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o +obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o obj-$(CONFIG_MACH_TORBRECK) += mach-torbreck.o # device support obj-y += dev-audio.o -obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o +obj-y += setup-i2c0.o obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o obj-$(CONFIG_S5PV210_SETUP_FIMC) += setup-fimc.o -obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o -obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o +obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o obj-$(CONFIG_S5PV210_SETUP_IDE) += setup-ide.o obj-$(CONFIG_S5PV210_SETUP_KEYPAD) += setup-keypad.o -obj-$(CONFIG_S5PV210_SETUP_SDHCI) += setup-sdhci.o obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o +obj-$(CONFIG_S5PV210_SETUP_SPI) += setup-spi.o diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 4c5ac7a69e9e..c78dfddd77fd 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -17,7 +17,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/clk.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/io.h> #include <mach/map.h> @@ -29,7 +29,8 @@ #include <plat/pll.h> #include <plat/s5p-clock.h> #include <plat/clock-clksrc.h> -#include <plat/s5pv210.h> + +#include "common.h" static unsigned long xtal; @@ -399,30 +400,6 @@ static struct clk init_clocks_off[] = { .enable = s5pv210_clk_ip1_ctrl, .ctrlbit = (1<<25), }, { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip2_ctrl, - .ctrlbit = (1<<16), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip2_ctrl, - .ctrlbit = (1<<17), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.2", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip2_ctrl, - .ctrlbit = (1<<18), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.3", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip2_ctrl, - .ctrlbit = (1<<19), - }, { .name = "systimer", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, @@ -559,6 +536,38 @@ static struct clk init_clocks[] = { }, }; +static struct clk clk_hsmmc0 = { + .name = "hsmmc", + .devname = "s3c-sdhci.0", + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip2_ctrl, + .ctrlbit = (1<<16), +}; + +static struct clk clk_hsmmc1 = { + .name = "hsmmc", + .devname = "s3c-sdhci.1", + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip2_ctrl, + .ctrlbit = (1<<17), +}; + +static struct clk clk_hsmmc2 = { + .name = "hsmmc", + .devname = "s3c-sdhci.2", + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip2_ctrl, + .ctrlbit = (1<<18), +}; + +static struct clk clk_hsmmc3 = { + .name = "hsmmc", + .devname = "s3c-sdhci.3", + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip2_ctrl, + .ctrlbit = (1<<19), +}; + static struct clk *clkset_uart_list[] = { [6] = &clk_mout_mpll.clk, [7] = &clk_mout_epll.clk, @@ -809,46 +818,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV6, .shift = 12, .size = 3 }, }, { .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.0", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.1", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 13), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.2", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 14), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.3", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 15), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 }, - }, { - .clk = { .name = "sclk_fimc", .devname = "s5pv210-fimc.0", .enable = s5pv210_clk_mask1_ctrl, @@ -906,46 +875,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 4 }, }, { .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.0", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.1", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 9), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.2", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 10), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 8, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.3", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 11), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 12, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 }, - }, { - .clk = { .name = "sclk_mfc", .devname = "s5p-mfc", .enable = s5pv210_clk_ip0_ctrl, @@ -983,26 +912,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV1, .shift = 28, .size = 4 }, }, { .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.0", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 16), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC5, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV5, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.1", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 17), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC5, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV5, .shift = 4, .size = 4 }, - }, { - .clk = { .name = "sclk_pwi", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 29), @@ -1022,6 +931,147 @@ static struct clksrc_clk clksrcs[] = { }, }; +static struct clksrc_clk clk_sclk_uart0 = { + .clk = { + .name = "uclk1", + .devname = "s5pv210-uart.0", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart1 = { + .clk = { + .name = "uclk1", + .devname = "s5pv210-uart.1", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 13), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart2 = { + .clk = { + .name = "uclk1", + .devname = "s5pv210-uart.2", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 14), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart3 = { + .clk = { + .name = "uclk1", + .devname = "s5pv210-uart.3", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 15), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc0 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.0", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc1 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.1", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 9), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 4, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc2 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.2", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 10), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 8, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc3 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.3", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 11), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 12, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_spi0 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.0", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 16), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC5, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV5, .shift = 0, .size = 4 }, + }; + +static struct clksrc_clk clk_sclk_spi1 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.1", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 17), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC5, .shift = 4, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV5, .shift = 4, .size = 4 }, + }; + + +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uart0, + &clk_sclk_uart1, + &clk_sclk_uart2, + &clk_sclk_uart3, + &clk_sclk_mmc0, + &clk_sclk_mmc1, + &clk_sclk_mmc2, + &clk_sclk_mmc3, + &clk_sclk_spi0, + &clk_sclk_spi1, +}; + +static struct clk *clk_cdev[] = { + &clk_hsmmc0, + &clk_hsmmc1, + &clk_hsmmc2, + &clk_hsmmc3, +}; + /* Clock initialisation code */ static struct clksrc_clk *sysclks[] = { &clk_mout_apll, @@ -1261,6 +1311,25 @@ static struct clk *clks[] __initdata = { &clk_pcmcdclk2, }; +static struct clk_lookup s5pv210_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p), + CLKDEV_INIT("s5pv210-uart.0", "clk_uart_baud1", &clk_sclk_uart0.clk), + CLKDEV_INIT("s5pv210-uart.1", "clk_uart_baud1", &clk_sclk_uart1.clk), + CLKDEV_INIT("s5pv210-uart.2", "clk_uart_baud1", &clk_sclk_uart2.clk), + CLKDEV_INIT("s5pv210-uart.3", "clk_uart_baud1", &clk_sclk_uart3.clk), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2), + CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.0", &clk_hsmmc3), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), + CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk), + CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), + CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), + CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), +}; + void __init s5pv210_register_clocks(void) { int ptr; @@ -1273,11 +1342,19 @@ void __init s5pv210_register_clocks(void) for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++) s3c_register_clksrc(sclk_tv[ptr], 1); + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) + s3c_register_clksrc(clksrc_cdev[ptr], 1); + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(s5pv210_clk_lookup, ARRAY_SIZE(s5pv210_clk_lookup)); + + s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); + for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++) + s3c_disable_clocks(clk_cdev[ptr], 1); s3c24xx_register_clock(&dummy_apb_pclk); s3c_pwmclk_init(); diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/common.c index 84ec74633232..9c1bcdcc12c3 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/common.c @@ -1,12 +1,13 @@ -/* linux/arch/arm/mach-s5pv210/cpu.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. +/* + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * + * Common Codes for S5PV210 + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -*/ + */ #include <linux/kernel.h> #include <linux/types.h> @@ -17,37 +18,78 @@ #include <linux/module.h> #include <linux/clk.h> #include <linux/io.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/platform_device.h> #include <linux/sched.h> #include <linux/dma-mapping.h> +#include <linux/serial_core.h> +#include <asm/proc-fns.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/proc-fns.h> #include <mach/map.h> #include <mach/regs-clock.h> #include <plat/cpu.h> -#include <plat/devs.h> #include <plat/clock.h> -#include <plat/fb-core.h> -#include <plat/s5pv210.h> +#include <plat/devs.h> +#include <plat/sdhci.h> #include <plat/adc-core.h> #include <plat/ata-core.h> +#include <plat/fb-core.h> #include <plat/fimc-core.h> #include <plat/iic-core.h> #include <plat/keypad-core.h> -#include <plat/sdhci.h> -#include <plat/reset.h> #include <plat/tv-core.h> +#include <plat/regs-serial.h> + +#include "common.h" + +static const char name_s5pv210[] = "S5PV210/S5PC110"; + +static struct cpu_table cpu_ids[] __initdata = { + { + .idcode = S5PV210_CPU_ID, + .idmask = S5PV210_CPU_MASK, + .map_io = s5pv210_map_io, + .init_clocks = s5pv210_init_clocks, + .init_uarts = s5pv210_init_uarts, + .init = s5pv210_init, + .name = name_s5pv210, + }, +}; /* Initial IO mappings */ static struct map_desc s5pv210_iodesc[] __initdata = { { + .virtual = (unsigned long)S5P_VA_CHIPID, + .pfn = __phys_to_pfn(S5PV210_PA_CHIPID), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_SYS, + .pfn = __phys_to_pfn(S5PV210_PA_SYSCON), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_TIMER, + .pfn = __phys_to_pfn(S5PV210_PA_TIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_WATCHDOG, + .pfn = __phys_to_pfn(S5PV210_PA_WATCHDOG), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SROMC, + .pfn = __phys_to_pfn(S5PV210_PA_SROMC), + .length = SZ_4K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5P_VA_SYSTIMER, .pfn = __phys_to_pfn(S5PV210_PA_SYSTIMER), .length = SZ_4K, @@ -108,19 +150,32 @@ static void s5pv210_idle(void) local_irq_enable(); } -static void s5pv210_sw_reset(void) +void s5pv210_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); } -/* s5pv210_map_io +/* + * s5pv210_map_io * * register the standard cpu IO areas -*/ + */ -void __init s5pv210_map_io(void) +void __init s5pv210_init_io(struct map_desc *mach_desc, int size) { + /* initialize the io descriptors we need for initialization */ iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc)); + if (mach_desc) + iotable_init(mach_desc, size); + + /* detect cpu id and rev. */ + s5p_init_cpu(S5P_VA_CHIPID); + + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); +} + +void __init s5pv210_map_io(void) +{ init_consistent_dma_size(14 << 20); /* initialise device information early */ @@ -174,19 +229,19 @@ void __init s5pv210_init_irq(void) s5p_init_irq(vic, ARRAY_SIZE(vic)); } -struct sysdev_class s5pv210_sysclass = { - .name = "s5pv210-core", +struct bus_type s5pv210_subsys = { + .name = "s5pv210-core", + .dev_name = "s5pv210-core", }; -static struct sys_device s5pv210_sysdev = { - .cls = &s5pv210_sysclass, +static struct device s5pv210_dev = { + .bus = &s5pv210_subsys, }; static int __init s5pv210_core_init(void) { - return sysdev_class_register(&s5pv210_sysclass); + return subsys_system_register(&s5pv210_subsys, NULL); } - core_initcall(s5pv210_core_init); int __init s5pv210_init(void) @@ -196,8 +251,12 @@ int __init s5pv210_init(void) /* set idle function */ pm_idle = s5pv210_idle; - /* set sw_reset function */ - s5p_reset_hook = s5pv210_sw_reset; + return device_register(&s5pv210_dev); +} - return sysdev_register(&s5pv210_sysdev); +/* uart registration process */ + +void __init s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); } diff --git a/arch/arm/mach-s5pv210/common.h b/arch/arm/mach-s5pv210/common.h new file mode 100644 index 000000000000..6ed2af5c7518 --- /dev/null +++ b/arch/arm/mach-s5pv210/common.h @@ -0,0 +1,37 @@ +/* + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Common Header for S5PV210 machines + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_S5PV210_COMMON_H +#define __ARCH_ARM_MACH_S5PV210_COMMON_H + +void s5pv210_init_io(struct map_desc *mach_desc, int size); +void s5pv210_init_irq(void); + +void s5pv210_register_clocks(void); +void s5pv210_setup_clocks(void); + +void s5pv210_restart(char mode, const char *cmd); + +#ifdef CONFIG_CPU_S5PV210 + +extern int s5pv210_init(void); +extern void s5pv210_map_io(void); +extern void s5pv210_init_clocks(int xtal); +extern void s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +#else +#define s5pv210_init_clocks NULL +#define s5pv210_init_uarts NULL +#define s5pv210_map_io NULL +#define s5pv210_init NULL +#endif + +#endif /* __ARCH_ARM_MACH_S5PV210_COMMON_H */ diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c deleted file mode 100644 index eaf9a7bff7a0..000000000000 --- a/arch/arm/mach-s5pv210/dev-spi.c +++ /dev/null @@ -1,175 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/dev-spi.c - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <mach/dma.h> -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/spi-clocks.h> - -#include <plat/s3c64xx-spi.h> -#include <plat/gpio-cfg.h> - -static char *spi_src_clks[] = { - [S5PV210_SPI_SRCCLK_PCLK] = "pclk", - [S5PV210_SPI_SRCCLK_SCLK] = "sclk_spi", -}; - -/* SPI Controller platform_devices */ - -/* Since we emulate multi-cs capability, we do not touch the CS. - * The emulated CS is toggled by board specific mechanism, as it can - * be either some immediate GPIO or some signal out of some other - * chip in between ... or some yet another way. - * We simply do not assume anything about CS. - */ -static int s5pv210_spi_cfg_gpio(struct platform_device *pdev) -{ - unsigned int base; - - switch (pdev->id) { - case 0: - base = S5PV210_GPB(0); - break; - - case 1: - base = S5PV210_GPB(4); - break; - - default: - dev_err(&pdev->dev, "Invalid SPI Controller number!"); - return -EINVAL; - } - - s3c_gpio_cfgall_range(base, 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - - return 0; -} - -static struct resource s5pv210_spi0_resource[] = { - [0] = { - .start = S5PV210_PA_SPI0, - .end = S5PV210_PA_SPI0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI0_TX, - .end = DMACH_SPI0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI0_RX, - .end = DMACH_SPI0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI0, - .end = IRQ_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5pv210_spi0_pdata = { - .cfg_gpio = s5pv210_spi_cfg_gpio, - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, - .high_speed = 1, - .tx_st_done = 25, -}; - -static u64 spi_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5pv210_device_spi0 = { - .name = "s3c64xx-spi", - .id = 0, - .num_resources = ARRAY_SIZE(s5pv210_spi0_resource), - .resource = s5pv210_spi0_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv210_spi0_pdata, - }, -}; - -static struct resource s5pv210_spi1_resource[] = { - [0] = { - .start = S5PV210_PA_SPI1, - .end = S5PV210_PA_SPI1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI1_TX, - .end = DMACH_SPI1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI1_RX, - .end = DMACH_SPI1_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI1, - .end = IRQ_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5pv210_spi1_pdata = { - .cfg_gpio = s5pv210_spi_cfg_gpio, - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 15, - .high_speed = 1, - .tx_st_done = 25, -}; - -struct platform_device s5pv210_device_spi1 = { - .name = "s3c64xx-spi", - .id = 1, - .num_resources = ARRAY_SIZE(s5pv210_spi1_resource), - .resource = s5pv210_spi1_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv210_spi1_pdata, - }, -}; - -void __init s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) -{ - struct s3c64xx_spi_info *pd; - - /* Reject invalid configuration */ - if (!num_cs || src_clk_nr < 0 - || src_clk_nr > S5PV210_SPI_SRCCLK_SCLK) { - printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); - return; - } - - switch (cntrlr) { - case 0: - pd = &s5pv210_spi0_pdata; - break; - case 1: - pd = &s5pv210_spi1_pdata; - break; - default: - printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", - __func__, cntrlr); - return; - } - - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - pd->src_clk_name = spi_src_clks[src_clk_nr]; -} diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index 86b749c18b77..a6113e0267f2 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -35,90 +35,40 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -struct dma_pl330_peri pdma0_peri[28] = { - { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = DMACH_MAX, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0S_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_AC97_MICIN, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_AC97_PCMIN, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_AC97_PCMOUT, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_PWM, - }, { - .peri_id = (u8)DMACH_SPDIF, - .rqtype = MEMTODEV, - }, +u8 pdma0_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_MAX, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S0S_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_MAX, + DMACH_MAX, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_MAX, + DMACH_MAX, + DMACH_AC97_MICIN, + DMACH_AC97_PCMIN, + DMACH_AC97_PCMOUT, + DMACH_MAX, + DMACH_PWM, + DMACH_SPDIF, }; struct dma_pl330_platdata s5pv210_pdma0_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma0_peri), - .peri = pdma0_peri, + .peri_id = pdma0_peri, }; struct amba_device s5pv210_device_pdma0 = { @@ -137,102 +87,44 @@ struct amba_device s5pv210_device_pdma0 = { .periphid = 0x00041330, }; -struct dma_pl330_peri pdma1_peri[32] = { - { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = DMACH_MAX, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0S_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_PCM0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MSM_REQ0, - }, { - .peri_id = (u8)DMACH_MSM_REQ1, - }, { - .peri_id = (u8)DMACH_MSM_REQ2, - }, { - .peri_id = (u8)DMACH_MSM_REQ3, - }, { - .peri_id = (u8)DMACH_PCM2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM2_TX, - .rqtype = MEMTODEV, - }, +u8 pdma1_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_MAX, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S0S_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_I2S2_RX, + DMACH_I2S2_TX, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_MAX, + DMACH_MAX, + DMACH_PCM0_RX, + DMACH_PCM0_TX, + DMACH_PCM1_RX, + DMACH_PCM1_TX, + DMACH_MSM_REQ0, + DMACH_MSM_REQ1, + DMACH_MSM_REQ2, + DMACH_MSM_REQ3, + DMACH_PCM2_RX, + DMACH_PCM2_TX, }; struct dma_pl330_platdata s5pv210_pdma1_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma1_peri), - .peri = pdma1_peri, + .peri_id = pdma1_peri, }; struct amba_device s5pv210_device_pdma1 = { @@ -253,7 +145,12 @@ struct amba_device s5pv210_device_pdma1 = { static int __init s5pv210_dma_init(void) { + dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask); amba_device_register(&s5pv210_device_pdma0, &iomem_resource); + + dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask); amba_device_register(&s5pv210_device_pdma1, &iomem_resource); return 0; diff --git a/arch/arm/mach-s5pv210/include/mach/entry-macro.S b/arch/arm/mach-s5pv210/include/mach/entry-macro.S index 3aa41ac59f07..bebca1b5d0b1 100644 --- a/arch/arm/mach-s5pv210/include/mach/entry-macro.S +++ b/arch/arm/mach-s5pv210/include/mach/entry-macro.S @@ -10,45 +10,8 @@ * published by the Free Software Foundation. */ -#include <asm/hardware/vic.h> -#include <mach/map.h> -#include <plat/irqs.h> - .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - ldr \base, =VA_VIC0 - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - @ check the vic0 - mov \irqnr, # S5P_IRQ_OFFSET + 31 - ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] - teq \irqstat, #0 - - @ otherwise try vic1 - addeq \tmp, \base, #(VA_VIC1 - VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - @ otherwise try vic2 - addeq \tmp, \base, #(VA_VIC2 - VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - @ otherwise try vic3 - addeq \tmp, \base, #(VA_VIC3 - VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat - .endm diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index 5e0de3a31f3d..e777e010ed2e 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -118,6 +118,8 @@ #define IRQ_MDNIE3 S5P_IRQ_VIC3(8) #define IRQ_VIC_END S5P_IRQ_VIC3(31) +#define IRQ_TIMER_BASE (11) + #define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) #define S5P_EINT_BASE2 (IRQ_VIC_END + 1) diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index 7ff609f1568b..89c34b8f73bf 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -109,6 +109,8 @@ #define S3C_PA_RTC S5PV210_PA_RTC #define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG #define S3C_PA_WDT S5PV210_PA_WATCHDOG +#define S3C_PA_SPI0 S5PV210_PA_SPI0 +#define S3C_PA_SPI1 S5PV210_PA_SPI1 #define S5P_PA_CHIPID S5PV210_PA_CHIPID #define S5P_PA_FIMC0 S5PV210_PA_FIMC0 diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h index af8a200b2135..bf288ced860a 100644 --- a/arch/arm/mach-s5pv210/include/mach/system.h +++ b/arch/arm/mach-s5pv210/include/mach/system.h @@ -13,8 +13,6 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H __FILE__ -#include <plat/system-reset.h> - static void arch_idle(void) { /* nothing here yet */ diff --git a/arch/arm/mach-s5pv210/include/mach/vmalloc.h b/arch/arm/mach-s5pv210/include/mach/vmalloc.h deleted file mode 100644 index a6c659d68a5d..000000000000 --- a/arch/arm/mach-s5pv210/include/mach/vmalloc.h +++ /dev/null @@ -1,22 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/vmalloc.h - * - * Copyright 2010 Ben Dooks <ben-linux@fluff.org> - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s5p6442/include/mach/vmalloc.h - * - * S5PV210 vmalloc definition - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H __FILE__ - -#define VMALLOC_END 0xF6000000UL - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5pv210/init.c b/arch/arm/mach-s5pv210/init.c deleted file mode 100644 index 4865ae2c475a..000000000000 --- a/arch/arm/mach-s5pv210/init.c +++ /dev/null @@ -1,44 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/init.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/s5pv210.h> -#include <plat/regs-serial.h> - -static struct s3c24xx_uart_clksrc s5pv210_serial_clocks[] = { - [0] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - -/* uart registration process */ -void __init s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->clocks = s5pv210_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5pv210_serial_clocks); - } - } - - s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); -} diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 5811a96125f0..5e734d025a6a 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -22,6 +22,7 @@ #include <linux/input.h> #include <linux/gpio.h> +#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/setup.h> @@ -32,7 +33,6 @@ #include <plat/gpio-cfg.h> #include <plat/regs-serial.h> -#include <plat/s5pv210.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb.h> @@ -41,6 +41,8 @@ #include <plat/s5p-time.h> #include <plat/regs-fb-v4.h> +#include "common.h" + /* Following are default values for UCON, ULCON and UFCON UART registers */ #define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -595,8 +597,7 @@ static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = { static void aquila_setup_sdhci(void) { - gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN"); - gpio_direction_output(AQUILA_EXT_FLASH_EN, 1); + gpio_request_one(AQUILA_EXT_FLASH_EN, GPIOF_OUT_INIT_HIGH, "FLASH_EN"); s3c_sdhci0_set_platdata(&aquila_hsmmc0_data); s3c_sdhci1_set_platdata(&aquila_hsmmc1_data); @@ -644,7 +645,7 @@ static void __init aquila_sound_init(void) static void __init aquila_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s5pv210_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs)); s5p_set_timer_source(S5P_PWM3, S5P_PWM4); @@ -680,7 +681,9 @@ MACHINE_START(AQUILA, "Aquila") Kyungmin Park <kyungmin.park@samsung.com> */ .atag_offset = 0x100, .init_irq = s5pv210_init_irq, + .handle_irq = vic_handle_irq, .map_io = aquila_map_io, .init_machine = aquila_machine_init, .timer = &s5p_timer, + .restart = s5pv210_restart, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 15edcae448b9..ff9152610439 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -27,6 +27,7 @@ #include <linux/gpio.h> #include <linux/interrupt.h> +#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/setup.h> @@ -37,7 +38,6 @@ #include <plat/gpio-cfg.h> #include <plat/regs-serial.h> -#include <plat/s5pv210.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb.h> @@ -54,6 +54,8 @@ #include <media/s5p_fimc.h> #include <media/noon010pc30.h> +#include "common.h" + /* Following are default values for UCON, ULCON and UFCON UART registers */ #define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -227,8 +229,7 @@ static void __init goni_radio_init(void) i2c1_devs[0].irq = gpio_to_irq(gpio); gpio = S5PV210_GPJ2(5); /* XMSMDATA_5 */ - gpio_request(gpio, "FM_RST"); - gpio_direction_output(gpio, 1); + gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "FM_RST"); } /* TSP */ @@ -264,8 +265,7 @@ static void __init goni_tsp_init(void) int gpio; gpio = S5PV210_GPJ1(3); /* XMSMADDR_11 */ - gpio_request(gpio, "TSP_LDO_ON"); - gpio_direction_output(gpio, 1); + gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON"); gpio_export(gpio, 0); gpio = S5PV210_GPJ0(5); /* XMSMADDR_5 */ @@ -890,7 +890,7 @@ static void __init goni_sound_init(void) static void __init goni_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s5pv210_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs)); s5p_set_timer_source(S5P_PWM3, S5P_PWM4); @@ -956,8 +956,10 @@ MACHINE_START(GONI, "GONI") /* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */ .atag_offset = 0x100, .init_irq = s5pv210_init_irq, + .handle_irq = vic_handle_irq, .map_io = goni_map_io, .init_machine = goni_machine_init, .timer = &s5p_timer, .reserve = &goni_reserve, + .restart = s5pv210_restart, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index f7266bb0cac8..b323983b2c54 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -13,8 +13,9 @@ #include <linux/init.h> #include <linux/serial_core.h> #include <linux/i2c.h> -#include <linux/sysdev.h> +#include <linux/device.h> +#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/setup.h> @@ -24,7 +25,6 @@ #include <mach/regs-clock.h> #include <plat/regs-serial.h> -#include <plat/s5pv210.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/ata.h> @@ -32,6 +32,8 @@ #include <plat/pm.h> #include <plat/s5p-time.h> +#include "common.h" + /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -109,7 +111,7 @@ static struct i2c_board_info smdkc110_i2c_devs2[] __initdata = { static void __init smdkc110_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s5pv210_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); s5p_set_timer_source(S5P_PWM3, S5P_PWM4); @@ -138,7 +140,9 @@ MACHINE_START(SMDKC110, "SMDKC110") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ .atag_offset = 0x100, .init_irq = s5pv210_init_irq, + .handle_irq = vic_handle_irq, .map_io = smdkc110_map_io, .init_machine = smdkc110_machine_init, .timer = &s5p_timer, + .restart = s5pv210_restart, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index a9106c392398..dff9ea7b5bba 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -13,13 +13,14 @@ #include <linux/i2c.h> #include <linux/init.h> #include <linux/serial_core.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/dm9000.h> #include <linux/fb.h> #include <linux/gpio.h> #include <linux/delay.h> #include <linux/pwm_backlight.h> +#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/setup.h> @@ -33,7 +34,6 @@ #include <plat/regs-serial.h> #include <plat/regs-srom.h> #include <plat/gpio-cfg.h> -#include <plat/s5pv210.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/adc.h> @@ -47,6 +47,8 @@ #include <plat/backlight.h> #include <plat/regs-fb-v4.h> +#include "common.h" + /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -153,15 +155,12 @@ static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd, { if (power) { #if !defined(CONFIG_BACKLIGHT_PWM) - gpio_request(S5PV210_GPD0(3), "GPD0"); - gpio_direction_output(S5PV210_GPD0(3), 1); + gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_HIGH, "GPD0"); gpio_free(S5PV210_GPD0(3)); #endif /* fire nRESET on power up */ - gpio_request(S5PV210_GPH0(6), "GPH0"); - - gpio_direction_output(S5PV210_GPH0(6), 1); + gpio_request_one(S5PV210_GPH0(6), GPIOF_OUT_INIT_HIGH, "GPH0"); gpio_set_value(S5PV210_GPH0(6), 0); mdelay(10); @@ -172,8 +171,7 @@ static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd, gpio_free(S5PV210_GPH0(6)); } else { #if !defined(CONFIG_BACKLIGHT_PWM) - gpio_request(S5PV210_GPD0(3), "GPD0"); - gpio_direction_output(S5PV210_GPD0(3), 0); + gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_LOW, "GPD0"); gpio_free(S5PV210_GPD0(3)); #endif } @@ -273,11 +271,12 @@ static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = { static struct platform_pwm_backlight_data smdkv210_bl_data = { .pwm_id = 3, + .pwm_period_ns = 1000, }; static void __init smdkv210_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s5pv210_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); s5p_set_timer_source(S5P_PWM2, S5P_PWM4); @@ -315,7 +314,9 @@ MACHINE_START(SMDKV210, "SMDKV210") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ .atag_offset = 0x100, .init_irq = s5pv210_init_irq, + .handle_irq = vic_handle_irq, .map_io = smdkv210_map_io, .init_machine = smdkv210_machine_init, .timer = &s5p_timer, + .restart = s5pv210_restart, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c index 97cc066c5369..74e99bc0dc9b 100644 --- a/arch/arm/mach-s5pv210/mach-torbreck.c +++ b/arch/arm/mach-s5pv210/mach-torbreck.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/serial_core.h> +#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/setup.h> @@ -23,12 +24,13 @@ #include <mach/regs-clock.h> #include <plat/regs-serial.h> -#include <plat/s5pv210.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/iic.h> #include <plat/s5p-time.h> +#include "common.h" + /* Following are default values for UCON, ULCON and UFCON UART registers */ #define TORBRECK_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -102,7 +104,7 @@ static struct i2c_board_info torbreck_i2c_devs2[] __initdata = { static void __init torbreck_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s5pv210_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs)); s5p_set_timer_source(S5P_PWM3, S5P_PWM4); @@ -127,7 +129,9 @@ MACHINE_START(TORBRECK, "TORBRECK") /* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */ .atag_offset = 0x100, .init_irq = s5pv210_init_irq, + .handle_irq = vic_handle_irq, .map_io = torbreck_map_io, .init_machine = torbreck_machine_init, .timer = &s5p_timer, + .restart = s5pv210_restart, MACHINE_END diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index f149d278377b..677c71c41e50 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -133,7 +133,7 @@ static void s5pv210_pm_prepare(void) s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); } -static int s5pv210_pm_add(struct sys_device *sysdev) +static int s5pv210_pm_add(struct device *dev) { pm_cpu_prep = s5pv210_pm_prepare; pm_cpu_sleep = s5pv210_cpu_suspend; @@ -141,13 +141,15 @@ static int s5pv210_pm_add(struct sys_device *sysdev) return 0; } -static struct sysdev_driver s5pv210_pm_driver = { - .add = s5pv210_pm_add, +static struct subsys_interface s5pv210_pm_interface = { + .name = "s5pv210_pm", + .subsys = &s5pv210_subsys, + .add_dev = s5pv210_pm_add, }; static __init int s5pv210_pm_drvinit(void) { - return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver); + return subsys_interface_register(&s5pv210_pm_interface); } arch_initcall(s5pv210_pm_drvinit); diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c deleted file mode 100644 index 6b8ccc4d35fd..000000000000 --- a/arch/arm/mach-s5pv210/setup-sdhci.c +++ /dev/null @@ -1,22 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/setup-sdhci.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - Helper functions for settign up SDHCI device(s) (HSMMC) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/types.h> - -/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ - -char *s5pv210_hsmmc_clksrcs[4] = { - [0] = "hsmmc", /* HCLK */ - /* [1] = "hsmmc", - duplicate HCLK entry */ - [2] = "sclk_mmc", /* mmc_bus */ - /* [3] = NULL, - reserved */ -}; diff --git a/arch/arm/mach-s5pv210/setup-spi.c b/arch/arm/mach-s5pv210/setup-spi.c new file mode 100644 index 000000000000..f43c5048a37d --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-spi.c @@ -0,0 +1,51 @@ +/* linux/arch/arm/mach-s5pv210/setup-spi.c + * + * Copyright (C) 2011 Samsung Electronics Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <linux/platform_device.h> + +#include <plat/gpio-cfg.h> +#include <plat/s3c64xx-spi.h> + +#ifdef CONFIG_S3C64XX_DEV_SPI0 +struct s3c64xx_spi_info s3c64xx_spi0_pdata = { + .fifo_lvl_mask = 0x1ff, + .rx_lvl_offset = 15, + .high_speed = 1, + .tx_st_done = 25, +}; + +int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PV210_GPB(2), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; +} +#endif + +#ifdef CONFIG_S3C64XX_DEV_SPI1 +struct s3c64xx_spi_info s3c64xx_spi1_pdata = { + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 15, + .high_speed = 1, + .tx_st_done = 25, +}; + +int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PV210_GPB(6), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; +} +#endif diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot index 5a616f6e5612..f7951aa04562 100644 --- a/arch/arm/mach-sa1100/Makefile.boot +++ b/arch/arm/mach-sa1100/Makefile.boot @@ -1,5 +1,5 @@ -ifeq ($(CONFIG_ARCH_SA1100),y) - zreladdr-$(CONFIG_SA1111) += 0xc0208000 +ifeq ($(CONFIG_SA1111),y) + zreladdr-y += 0xc0208000 else zreladdr-y += 0xc0008000 endif diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 3dd133f18415..6b93e200bcac 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -455,4 +455,5 @@ MACHINE_START(ASSABET, "Intel-Assabet") #ifdef CONFIG_SA1111 .dma_zone_size = SZ_1M, #endif + .restart = sa11x0_restart, MACHINE_END diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index bda83e1ab078..b07a2c024cb7 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -309,4 +309,5 @@ MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4") #ifdef CONFIG_SA1111 .dma_zone_size = SZ_1M, #endif + .restart = sa11x0_restart, MACHINE_END diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index 7f3da4b11ec9..11bb6d0b9be3 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -139,4 +139,5 @@ MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube") .init_irq = cerf_init_irq, .timer = &sa1100_timer, .init_machine = cerf_init, + .restart = sa11x0_restart, MACHINE_END diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c index dab3c6347a8f..d6df9f6c9f7e 100644 --- a/arch/arm/mach-sa1100/clock.c +++ b/arch/arm/mach-sa1100/clock.c @@ -11,17 +11,39 @@ #include <linux/clk.h> #include <linux/spinlock.h> #include <linux/mutex.h> +#include <linux/io.h> +#include <linux/clkdev.h> #include <mach/hardware.h> -/* - * Very simple clock implementation - we only have one clock to deal with. - */ +struct clkops { + void (*enable)(struct clk *); + void (*disable)(struct clk *); + unsigned long (*getrate)(struct clk *); +}; + struct clk { + const struct clkops *ops; + unsigned long rate; unsigned int enabled; }; -static void clk_gpio27_enable(void) +#define INIT_CLKREG(_clk, _devname, _conname) \ + { \ + .clk = _clk, \ + .dev_id = _devname, \ + .con_id = _conname, \ + } + +#define DEFINE_CLK(_name, _ops, _rate) \ +struct clk clk_##_name = { \ + .ops = _ops, \ + .rate = _rate, \ + } + +static DEFINE_SPINLOCK(clocks_lock); + +static void clk_gpio27_enable(struct clk *clk) { /* * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111: @@ -32,38 +54,22 @@ static void clk_gpio27_enable(void) TUCR = TUCR_3_6864MHz; } -static void clk_gpio27_disable(void) +static void clk_gpio27_disable(struct clk *clk) { TUCR = 0; GPDR &= ~GPIO_32_768kHz; GAFR &= ~GPIO_32_768kHz; } -static struct clk clk_gpio27; - -static DEFINE_SPINLOCK(clocks_lock); - -struct clk *clk_get(struct device *dev, const char *id) -{ - const char *devname = dev_name(dev); - - return strcmp(devname, "sa1111.0") ? ERR_PTR(-ENOENT) : &clk_gpio27; -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - int clk_enable(struct clk *clk) { unsigned long flags; spin_lock_irqsave(&clocks_lock, flags); if (clk->enabled++ == 0) - clk_gpio27_enable(); + clk->ops->enable(clk); spin_unlock_irqrestore(&clocks_lock, flags); + return 0; } EXPORT_SYMBOL(clk_enable); @@ -76,13 +82,48 @@ void clk_disable(struct clk *clk) spin_lock_irqsave(&clocks_lock, flags); if (--clk->enabled == 0) - clk_gpio27_disable(); + clk->ops->disable(clk); spin_unlock_irqrestore(&clocks_lock, flags); } EXPORT_SYMBOL(clk_disable); unsigned long clk_get_rate(struct clk *clk) { - return 3686400; + unsigned long rate; + + rate = clk->rate; + if (clk->ops->getrate) + rate = clk->ops->getrate(clk); + + return rate; } EXPORT_SYMBOL(clk_get_rate); + +const struct clkops clk_gpio27_ops = { + .enable = clk_gpio27_enable, + .disable = clk_gpio27_disable, +}; + +static void clk_dummy_enable(struct clk *clk) { } +static void clk_dummy_disable(struct clk *clk) { } + +const struct clkops clk_dummy_ops = { + .enable = clk_dummy_enable, + .disable = clk_dummy_disable, +}; + +static DEFINE_CLK(gpio27, &clk_gpio27_ops, 3686400); +static DEFINE_CLK(dummy, &clk_dummy_ops, 0); + +static struct clk_lookup sa11xx_clkregs[] = { + INIT_CLKREG(&clk_gpio27, "sa1111.0", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), +}; + +static int __init sa11xx_clk_init(void) +{ + clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs)); + return 0; +} + +postcore_initcall(sa11xx_clk_init); diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 2965cc9d424e..b9060e236def 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -387,4 +387,5 @@ MACHINE_START(COLLIE, "Sharp-Collie") .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = collie_init, + .restart = sa11x0_restart, MACHINE_END diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 5fa5ae1f39e1..480d2ea46b00 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -126,6 +126,17 @@ static void sa1100_power_off(void) PMCR = PMCR_SF; } +void sa11x0_restart(char mode, const char *cmd) +{ + if (mode == 's') { + /* Jump into ROM at address 0 */ + soft_restart(0); + } else { + /* Use on-chip reset capability */ + RSRR = RSRR_SWR; + } +} + static void sa11x0_register_device(struct platform_device *dev, void *data) { int err; @@ -334,9 +345,29 @@ void sa11x0_register_irda(struct irda_platform_data *irda) sa11x0_register_device(&sa11x0ir_device, irda); } +static struct resource sa11x0rtc_resources[] = { + [0] = { + .start = 0x90010000, + .end = 0x900100ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_RTC1Hz, + .end = IRQ_RTC1Hz, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_RTCAlrm, + .end = IRQ_RTCAlrm, + .flags = IORESOURCE_IRQ, + }, +}; + static struct platform_device sa11x0rtc_device = { .name = "sa1100-rtc", .id = -1, + .resource = sa11x0rtc_resources, + .num_resources = ARRAY_SIZE(sa11x0rtc_resources), }; static struct platform_device *sa11x0_devices[] __initdata = { diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index b7a9a601c2d1..33268cf6be36 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -10,6 +10,7 @@ extern struct sys_timer sa1100_timer; extern void __init sa1100_map_io(void); extern void __init sa1100_init_irq(void); extern void __init sa1100_init_gpio(void); +extern void sa11x0_restart(char, const char *); #define SET_BANK(__nr,__start,__size) \ mi->bank[__nr].start = (__start), \ diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c index b30733a2b82e..1e6b3c105ba6 100644 --- a/arch/arm/mach-sa1100/h3100.c +++ b/arch/arm/mach-sa1100/h3100.c @@ -89,5 +89,6 @@ MACHINE_START(H3100, "Compaq iPAQ H3100") .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = h3100_mach_init, + .restart = sa11x0_restart, MACHINE_END diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 6fd324d92389..6b58e7460ecf 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -130,5 +130,6 @@ MACHINE_START(H3600, "Compaq iPAQ H3600") .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = h3600_mach_init, + .restart = sa11x0_restart, MACHINE_END diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index 30f4a551b8e5..c01bb36db940 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -200,4 +200,5 @@ MACHINE_START(HACKKIT, "HackKit Cpu Board") .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = hackkit_init, + .restart = sa11x0_restart, MACHINE_END diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h index ba9da9f7f183..e17b208f76d4 100644 --- a/arch/arm/mach-sa1100/include/mach/system.h +++ b/arch/arm/mach-sa1100/include/mach/system.h @@ -3,20 +3,7 @@ * * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net> */ -#include <mach/hardware.h> - static inline void arch_idle(void) { cpu_do_idle(); } - -static inline void arch_reset(char mode, const char *cmd) -{ - if (mode == 's') { - /* Jump into ROM at address 0 */ - cpu_reset(0); - } else { - /* Use on-chip reset capability */ - RSRR = RSRR_SWR; - } -} diff --git a/arch/arm/mach-sa1100/include/mach/vmalloc.h b/arch/arm/mach-sa1100/include/mach/vmalloc.h deleted file mode 100644 index b3d002398480..000000000000 --- a/arch/arm/mach-sa1100/include/mach/vmalloc.h +++ /dev/null @@ -1,4 +0,0 @@ -/* - * arch/arm/mach-sa1100/include/mach/vmalloc.h - */ -#define VMALLOC_END (0xe8000000UL) diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 77198fe02bc5..ee121d6f0480 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -373,4 +373,5 @@ MACHINE_START(JORNADA720, "HP Jornada 720") #ifdef CONFIG_SA1111 .dma_zone_size = SZ_1M, #endif + .restart = sa11x0_restart, MACHINE_END diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 5bc59d0947ba..af4e2761f3db 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -66,4 +66,5 @@ MACHINE_START(LART, "LART") .init_irq = sa1100_init_irq, .init_machine = lart_init, .timer = &sa1100_timer, + .restart = sa11x0_restart, MACHINE_END diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c index 032f3881d145..85f6ee672225 100644 --- a/arch/arm/mach-sa1100/nanoengine.c +++ b/arch/arm/mach-sa1100/nanoengine.c @@ -19,6 +19,7 @@ #include <asm/mach-types.h> #include <asm/setup.h> +#include <asm/page.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> @@ -116,4 +117,5 @@ MACHINE_START(NANOENGINE, "BSE nanoEngine") .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = nanoengine_init, + .restart = sa11x0_restart, MACHINE_END diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c index dd39fee59549..0d01ca788922 100644 --- a/arch/arm/mach-sa1100/pci-nanoengine.c +++ b/arch/arm/mach-sa1100/pci-nanoengine.c @@ -131,7 +131,8 @@ static int __init pci_nanoengine_map_irq(const struct pci_dev *dev, u8 slot, struct pci_bus * __init pci_nanoengine_scan_bus(int nr, struct pci_sys_data *sys) { - return pci_scan_bus(sys->busnr, &pci_nano_ops, sys); + return pci_scan_root_bus(NULL, sys->busnr, &pci_nano_ops, sys, + &sys->resources); } static struct resource pci_io_ports = { @@ -226,7 +227,7 @@ static struct resource pci_prefetchable_memory = { .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH, }; -static int __init pci_nanoengine_setup_resources(struct resource **resource) +static int __init pci_nanoengine_setup_resources(struct pci_sys_data *sys) { if (request_resource(&ioport_resource, &pci_io_ports)) { printk(KERN_ERR "PCI: unable to allocate io port region\n"); @@ -243,9 +244,9 @@ static int __init pci_nanoengine_setup_resources(struct resource **resource) printk(KERN_ERR "PCI: unable to allocate prefetchable\n"); return -EBUSY; } - resource[0] = &pci_io_ports; - resource[1] = &pci_non_prefetchable_memory; - resource[2] = &pci_prefetchable_memory; + pci_add_resource(&sys->resources, &pci_io_ports); + pci_add_resource(&sys->resources, &pci_non_prefetchable_memory); + pci_add_resource(&sys->resources, &pci_prefetchable_memory); return 1; } @@ -260,7 +261,7 @@ int __init pci_nanoengine_setup(int nr, struct pci_sys_data *sys) if (nr == 0) { sys->mem_offset = NANO_PCI_MEM_RW_PHYS; sys->io_offset = 0x400; - ret = pci_nanoengine_setup_resources(sys->resource); + ret = pci_nanoengine_setup_resources(sys); /* Enable alternate memory bus master mode, see * "Intel StrongARM SA1110 Developer's Manual", * section 10.8, "Alternate Memory Bus Master Mode". */ diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 65161f2bea29..9307df053533 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -150,4 +150,5 @@ MACHINE_START(PLEB, "PLEB") .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = pleb_init, + .restart = sa11x0_restart, MACHINE_END diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index 1cccbf5b9e9a..318b2b766a0b 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -87,4 +87,5 @@ MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)") .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = shannon_init, + .restart = sa11x0_restart, MACHINE_END diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 4790f3f3d008..e17c04d6e324 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -396,4 +396,5 @@ MACHINE_START(SIMPAD, "Simpad") .map_io = simpad_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, + .restart = sa11x0_restart, MACHINE_END diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index fa6602491d54..69e33535dee6 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -12,7 +12,6 @@ #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/sched.h> /* just for sched_clock() - funny that */ #include <linux/timex.h> #include <linux/clockchips.h> @@ -20,29 +19,9 @@ #include <asm/sched_clock.h> #include <mach/hardware.h> -/* - * This is the SA11x0 sched_clock implementation. - */ -static DEFINE_CLOCK_DATA(cd); - -/* - * Constants generated by clocks_calc_mult_shift(m, s, 3.6864MHz, - * NSEC_PER_SEC, 60). - * This gives a resolution of about 271ns and a wrap period of about 19min. - */ -#define SC_MULT 2275555556u -#define SC_SHIFT 23 - -unsigned long long notrace sched_clock(void) -{ - u32 cyc = OSCR; - return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT); -} - -static void notrace sa1100_update_sched_clock(void) +static u32 notrace sa1100_read_sched_clock(void) { - u32 cyc = OSCR; - update_sched_clock(&cd, cyc, (u32)~0); + return OSCR; } #define MIN_OSCR_DELTA 2 @@ -109,8 +88,7 @@ static void __init sa1100_timer_init(void) OIER = 0; OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3; - init_fixed_sched_clock(&cd, sa1100_update_sched_clock, 32, - 3686400, SC_MULT, SC_SHIFT); + setup_sched_clock(sa1100_read_sched_clock, 32, 3686400); clockevents_calc_mult_shift(&ckevt_sa1100_osmr0, 3686400, 4); ckevt_sa1100_osmr0.max_delta_ns = diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index feda3ca7fc95..a851c254ad6c 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -26,10 +26,9 @@ #define ROMCARD_SIZE 0x08000000 #define ROMCARD_START 0x10000000 -void arch_reset(char mode, const char *cmd) +static void shark_restart(char mode, const char *cmd) { short temp; - local_irq_disable(); /* Reset the Machine via pc[3] of the sequoia chipset */ outw(0x09,0x24); temp=inw(0x26); @@ -157,4 +156,5 @@ MACHINE_START(SHARK, "Shark") .init_irq = shark_init_irq, .timer = &shark_timer, .dma_zone_size = SZ_4M, + .restart = shark_restart, MACHINE_END diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h index 21c373b30bbc..1b2f2c5050a8 100644 --- a/arch/arm/mach-shark/include/mach/system.h +++ b/arch/arm/mach-shark/include/mach/system.h @@ -6,9 +6,6 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -/* Found in arch/mach-shark/core.c */ -extern void arch_reset(char mode, const char *cmd); - static inline void arch_idle(void) { } diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h deleted file mode 100644 index b10df988526d..000000000000 --- a/arch/arm/mach-shark/include/mach/vmalloc.h +++ /dev/null @@ -1,4 +0,0 @@ -/* - * arch/arm/mach-shark/include/mach/vmalloc.h - */ -#define VMALLOC_END 0xd0000000UL diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 737bdc631b0d..5ca1f9d66995 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -28,7 +28,6 @@ pfc-$(CONFIG_ARCH_SH73A0) += pfc-sh73a0.o obj-$(CONFIG_ARCH_SH7367) += entry-intc.o obj-$(CONFIG_ARCH_SH7377) += entry-intc.o obj-$(CONFIG_ARCH_SH7372) += entry-intc.o -obj-$(CONFIG_ARCH_SH73A0) += entry-gic.o # PM objects obj-$(CONFIG_SUSPEND) += suspend.o diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index b862e9f81e3e..a4e6ca04e319 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -466,8 +466,6 @@ static struct map_desc ag5evm_io_desc[] __initdata = { static void __init ag5evm_map_io(void) { iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc)); - /* DMA memory at 0xf6000000 - 0xffdfffff */ - init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh73a0_add_early_devices(); @@ -607,8 +605,9 @@ struct sys_timer ag5evm_timer = { MACHINE_START(AG5EVM, "ag5evm") .map_io = ag5evm_map_io, + .nr_irqs = NR_IRQS_LEGACY, .init_irq = sh73a0_init_irq, - .handle_irq = shmobile_handle_irq_gic, + .handle_irq = gic_handle_irq, .init_machine = ag5evm_init, .timer = &ag5evm_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 4c865ece9ac4..6a6f9f7568c2 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -1172,8 +1172,6 @@ static struct map_desc ap4evb_io_desc[] __initdata = { static void __init ap4evb_map_io(void) { iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc)); - /* DMA memory at 0xf6000000 - 0xffdfffff */ - init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh7372_add_early_devices(); diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c index 8b620bf06221..72d557281b1f 100644 --- a/arch/arm/mach-shmobile/board-g3evm.c +++ b/arch/arm/mach-shmobile/board-g3evm.c @@ -261,8 +261,6 @@ static struct map_desc g3evm_io_desc[] __initdata = { static void __init g3evm_map_io(void) { iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc)); - /* DMA memory at 0xf6000000 - 0xffdfffff */ - init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh7367_add_early_devices(); diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c index 7719ddc5f591..2220b885cff5 100644 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -275,8 +275,6 @@ static struct map_desc g4evm_io_desc[] __initdata = { static void __init g4evm_map_io(void) { iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc)); - /* DMA memory at 0xf6000000 - 0xffdfffff */ - init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh7377_add_early_devices(); diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index bd9a78424d6b..857ceeec1bb0 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -33,6 +33,7 @@ #include <linux/input/sh_keysc.h> #include <linux/gpio_keys.h> #include <linux/leds.h> +#include <linux/platform_data/leds-renesas-tpu.h> #include <linux/mmc/host.h> #include <linux/mmc/sh_mmcif.h> #include <linux/mfd/tmio.h> @@ -56,7 +57,7 @@ static struct resource smsc9220_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(33), /* PINTA2 @ PORT144 */ + .start = SH73A0_PINT0_IRQ(2), /* PINTA2 */ .flags = IORESOURCE_IRQ, }, }; @@ -157,10 +158,6 @@ static struct platform_device gpio_keys_device = { #define GPIO_LED(n, g) { .name = n, .gpio = g } static struct gpio_led gpio_leds[] = { - GPIO_LED("V2513", GPIO_PORT153), /* PORT153 [TPU1T02] -> V2513 */ - GPIO_LED("V2514", GPIO_PORT199), /* PORT199 [TPU4TO1] -> V2514 */ - GPIO_LED("V2515", GPIO_PORT197), /* PORT197 [TPU2TO1] -> V2515 */ - GPIO_LED("KEYLED", GPIO_PORT163), /* PORT163 [TPU3TO0] -> KEYLED */ GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */ GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */ GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */ @@ -179,6 +176,119 @@ static struct platform_device gpio_leds_device = { }, }; +/* TPU LED */ +static struct led_renesas_tpu_config led_renesas_tpu12_pdata = { + .name = "V2513", + .pin_gpio_fn = GPIO_FN_TPU1TO2, + .pin_gpio = GPIO_PORT153, + .channel_offset = 0x90, + .timer_bit = 2, + .max_brightness = 1000, +}; + +static struct resource tpu12_resources[] = { + [0] = { + .name = "TPU12", + .start = 0xe6610090, + .end = 0xe66100b5, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu12_device = { + .name = "leds-renesas-tpu", + .id = 12, + .dev = { + .platform_data = &led_renesas_tpu12_pdata, + }, + .num_resources = ARRAY_SIZE(tpu12_resources), + .resource = tpu12_resources, +}; + +static struct led_renesas_tpu_config led_renesas_tpu41_pdata = { + .name = "V2514", + .pin_gpio_fn = GPIO_FN_TPU4TO1, + .pin_gpio = GPIO_PORT199, + .channel_offset = 0x50, + .timer_bit = 1, + .max_brightness = 1000, +}; + +static struct resource tpu41_resources[] = { + [0] = { + .name = "TPU41", + .start = 0xe6640050, + .end = 0xe6640075, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu41_device = { + .name = "leds-renesas-tpu", + .id = 41, + .dev = { + .platform_data = &led_renesas_tpu41_pdata, + }, + .num_resources = ARRAY_SIZE(tpu41_resources), + .resource = tpu41_resources, +}; + +static struct led_renesas_tpu_config led_renesas_tpu21_pdata = { + .name = "V2515", + .pin_gpio_fn = GPIO_FN_TPU2TO1, + .pin_gpio = GPIO_PORT197, + .channel_offset = 0x50, + .timer_bit = 1, + .max_brightness = 1000, +}; + +static struct resource tpu21_resources[] = { + [0] = { + .name = "TPU21", + .start = 0xe6620050, + .end = 0xe6620075, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu21_device = { + .name = "leds-renesas-tpu", + .id = 21, + .dev = { + .platform_data = &led_renesas_tpu21_pdata, + }, + .num_resources = ARRAY_SIZE(tpu21_resources), + .resource = tpu21_resources, +}; + +static struct led_renesas_tpu_config led_renesas_tpu30_pdata = { + .name = "KEYLED", + .pin_gpio_fn = GPIO_FN_TPU3TO0, + .pin_gpio = GPIO_PORT163, + .channel_offset = 0x10, + .timer_bit = 0, + .max_brightness = 1000, +}; + +static struct resource tpu30_resources[] = { + [0] = { + .name = "TPU30", + .start = 0xe6630010, + .end = 0xe6630035, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu30_device = { + .name = "leds-renesas-tpu", + .id = 30, + .dev = { + .platform_data = &led_renesas_tpu30_pdata, + }, + .num_resources = ARRAY_SIZE(tpu30_resources), + .resource = tpu30_resources, +}; + /* MMCIF */ static struct resource mmcif_resources[] = { [0] = { @@ -291,6 +401,10 @@ static struct platform_device *kota2_devices[] __initdata = { &keysc_device, &gpio_keys_device, &gpio_leds_device, + &leds_tpu12_device, + &leds_tpu41_device, + &leds_tpu21_device, + &leds_tpu30_device, &mmcif_device, &sdhi0_device, &sdhi1_device, @@ -317,18 +431,6 @@ static void __init kota2_map_io(void) shmobile_setup_console(); } -#define PINTER0A 0xe69000a0 -#define PINTCR0A 0xe69000b0 - -void __init kota2_init_irq(void) -{ - sh73a0_init_irq(); - - /* setup PINT: enable PINTA2 as active low */ - __raw_writel(1 << 29, PINTER0A); - __raw_writew(2 << 10, PINTCR0A); -} - static void __init kota2_init(void) { sh73a0_pinmux_init(); @@ -447,8 +549,9 @@ struct sys_timer kota2_timer = { MACHINE_START(KOTA2, "kota2") .map_io = kota2_map_io, - .init_irq = kota2_init_irq, - .handle_irq = shmobile_handle_irq_gic, + .nr_irqs = NR_IRQS_LEGACY, + .init_irq = sh73a0_init_irq, + .handle_irq = gic_handle_irq, .init_machine = kota2_init, .timer = &kota2_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9c5e598e0e3d..ed5256687397 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1390,8 +1390,6 @@ static struct map_desc mackerel_io_desc[] __initdata = { static void __init mackerel_map_io(void) { iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc)); - /* DMA memory at 0xf6000000 - 0xffdfffff */ - init_consistent_dma_size(158 << 20); /* setup early devices and console here as well */ sh7372_add_early_devices(); diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 61a846bb30f2..1370a89ca358 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -113,6 +113,12 @@ static struct clk main_clk = { .ops = &main_clk_ops, }; +/* Divide Main clock by two */ +static struct clk main_div2_clk = { + .ops = &div2_clk_ops, + .parent = &main_clk, +}; + /* PLL0, PLL1, PLL2, PLL3 */ static unsigned long pll_recalc(struct clk *clk) { @@ -181,6 +187,7 @@ static struct clk *main_clks[] = { &extal1_div2_clk, &extal2_div2_clk, &main_clk, + &main_div2_clk, &pll0_clk, &pll1_clk, &pll2_clk, @@ -243,7 +250,7 @@ static struct clk div6_clks[DIV6_NR] = { [DIV6_VCK1] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR1, 0), [DIV6_VCK2] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR2, 0), [DIV6_VCK3] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR3, 0), - [DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, 0), + [DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, CLK_ENABLE_ON_INIT), [DIV6_FLCTL] = SH_CLK_DIV6(&pll1_div2_clk, FLCKCR, 0), [DIV6_SDHI0] = SH_CLK_DIV6(&pll1_div2_clk, SD0CKCR, 0), [DIV6_SDHI1] = SH_CLK_DIV6(&pll1_div2_clk, SD1CKCR, 0), @@ -268,6 +275,7 @@ enum { MSTP001, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, MSTP331, MSTP329, MSTP325, MSTP323, MSTP318, MSTP314, MSTP313, MSTP312, MSTP311, + MSTP303, MSTP302, MSTP301, MSTP300, MSTP411, MSTP410, MSTP403, MSTP_NR }; @@ -301,6 +309,10 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */ [MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */ + [MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */ + [MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */ + [MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */ + [MSTP300] = MSTP(&main_div2_clk, SMSTPCR3, 0, 0), /* TPU4 */ [MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */ [MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */ [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ @@ -350,6 +362,10 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */ + CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */ + CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */ + CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */ + CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */ CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ diff --git a/arch/arm/mach-shmobile/entry-gic.S b/arch/arm/mach-shmobile/entry-gic.S deleted file mode 100644 index e20239b08c83..000000000000 --- a/arch/arm/mach-shmobile/entry-gic.S +++ /dev/null @@ -1,18 +0,0 @@ -/* - * ARM Interrupt demux handler using GIC - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2011 Paul Mundt - * Copyright (C) 2010 - 2011 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <asm/assembler.h> -#include <asm/entry-macro-multi.S> -#include <asm/hardware/gic.h> -#include <asm/hardware/entry-macro-gic.S> - - arch_irq_handler shmobile_handle_irq_gic diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index 834bd6cd508f..be78a2c73db4 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -7,7 +7,6 @@ extern void shmobile_secondary_vector(void); struct clk; extern int clk_init(void); extern void shmobile_handle_irq_intc(struct pt_regs *); -extern void shmobile_handle_irq_gic(struct pt_regs *); extern struct platform_suspend_ops shmobile_suspend_ops; struct cpuidle_driver; extern void (*shmobile_cpuidle_modes[])(void); @@ -35,8 +34,8 @@ extern void sh7372_add_standard_devices(void); extern void sh7372_clock_init(void); extern void sh7372_pinmux_init(void); extern void sh7372_pm_init(void); -extern void sh7372_resume_core_standby_a3sm(void); -extern int sh7372_do_idle_a3sm(unsigned long unused); +extern void sh7372_resume_core_standby_sysc(void); +extern int sh7372_do_idle_sysc(unsigned long sleep_mode); extern struct clk sh7372_extal1_clk; extern struct clk sh7372_extal2_clk; diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S index 8d4a416d4285..2a57b2964ee9 100644 --- a/arch/arm/mach-shmobile/include/mach/entry-macro.S +++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S @@ -18,14 +18,5 @@ .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - .endm - - .macro test_for_ipi, irqnr, irqstat, base, tmp - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h index 7bf0890e16ba..de795b42232a 100644 --- a/arch/arm/mach-shmobile/include/mach/gpio.h +++ b/arch/arm/mach-shmobile/include/mach/gpio.h @@ -12,8 +12,6 @@ #include <linux/kernel.h> #include <linux/errno.h> - -#define ARCH_NR_GPIOS 1024 #include <linux/sh_pfc.h> #ifdef CONFIG_GPIOLIB diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index 84532f9629b2..8254ab86f6cd 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -480,11 +480,10 @@ struct platform_device; struct sh7372_pm_domain { struct generic_pm_domain genpd; struct dev_power_governor *gov; - void (*suspend)(void); + int (*suspend)(void); void (*resume)(void); unsigned int bit_shift; bool no_debug; - bool stay_on; }; static inline struct sh7372_pm_domain *to_sh7372_pd(struct generic_pm_domain *d) @@ -499,6 +498,7 @@ extern struct sh7372_pm_domain sh7372_d4; extern struct sh7372_pm_domain sh7372_a4r; extern struct sh7372_pm_domain sh7372_a3rv; extern struct sh7372_pm_domain sh7372_a3ri; +extern struct sh7372_pm_domain sh7372_a4s; extern struct sh7372_pm_domain sh7372_a3sp; extern struct sh7372_pm_domain sh7372_a3sg; @@ -515,5 +515,7 @@ extern void sh7372_pm_add_subdomain(struct sh7372_pm_domain *sh7372_pd, extern void sh7372_intcs_suspend(void); extern void sh7372_intcs_resume(void); +extern void sh7372_intca_suspend(void); +extern void sh7372_intca_resume(void); #endif /* __ASM_SH7372_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h index 76a687eeaa22..956ac18ddbf9 100644 --- a/arch/arm/mach-shmobile/include/mach/system.h +++ b/arch/arm/mach-shmobile/include/mach/system.h @@ -8,7 +8,7 @@ static inline void arch_idle(void) static inline void arch_reset(char mode, const char *cmd) { - cpu_reset(0); + soft_restart(0); } #endif diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h deleted file mode 100644 index 2b8fd8b942fe..000000000000 --- a/arch/arm/mach-shmobile/include/mach/vmalloc.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_MACH_VMALLOC_H -#define __ASM_MACH_VMALLOC_H - -/* Vmalloc at ... - 0xe5ffffff */ -#define VMALLOC_END 0xe6000000UL - -#endif /* __ASM_MACH_VMALLOC_H */ diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index 2d8856df80e2..89afcaba99a1 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -535,6 +535,7 @@ static struct resource intcs_resources[] __initdata = { static struct intc_desc intcs_desc __initdata = { .name = "sh7372-intcs", .force_enable = ENABLED_INTCS, + .skip_syscore_suspend = true, .resource = intcs_resources, .num_resources = ARRAY_SIZE(intcs_resources), .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers, @@ -611,3 +612,52 @@ void sh7372_intcs_resume(void) for (k = 0x80; k <= 0x9c; k += 4) __raw_writeb(ffd5[k], intcs_ffd5 + k); } + +static unsigned short e694[0x200]; +static unsigned short e695[0x200]; + +void sh7372_intca_suspend(void) +{ + int k; + + for (k = 0x00; k <= 0x38; k += 4) + e694[k] = __raw_readw(0xe6940000 + k); + + for (k = 0x80; k <= 0xb4; k += 4) + e694[k] = __raw_readb(0xe6940000 + k); + + for (k = 0x180; k <= 0x1b4; k += 4) + e694[k] = __raw_readb(0xe6940000 + k); + + for (k = 0x00; k <= 0x50; k += 4) + e695[k] = __raw_readw(0xe6950000 + k); + + for (k = 0x80; k <= 0xa8; k += 4) + e695[k] = __raw_readb(0xe6950000 + k); + + for (k = 0x180; k <= 0x1a8; k += 4) + e695[k] = __raw_readb(0xe6950000 + k); +} + +void sh7372_intca_resume(void) +{ + int k; + + for (k = 0x00; k <= 0x38; k += 4) + __raw_writew(e694[k], 0xe6940000 + k); + + for (k = 0x80; k <= 0xb4; k += 4) + __raw_writeb(e694[k], 0xe6940000 + k); + + for (k = 0x180; k <= 0x1b4; k += 4) + __raw_writeb(e694[k], 0xe6940000 + k); + + for (k = 0x00; k <= 0x50; k += 4) + __raw_writew(e695[k], 0xe6950000 + k); + + for (k = 0x80; k <= 0xa8; k += 4) + __raw_writeb(e695[k], 0xe6950000 + k); + + for (k = 0x180; k <= 0x1a8; k += 4) + __raw_writeb(e695[k], 0xe6950000 + k); +} diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index 34bbcbfb1706..77b8fc12fc2f 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -82,11 +82,12 @@ static int pd_power_down(struct generic_pm_domain *genpd) struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd); unsigned int mask = 1 << sh7372_pd->bit_shift; - if (sh7372_pd->suspend) - sh7372_pd->suspend(); + if (sh7372_pd->suspend) { + int ret = sh7372_pd->suspend(); - if (sh7372_pd->stay_on) - return 0; + if (ret) + return ret; + } if (__raw_readl(PSTR) & mask) { unsigned int retry_count; @@ -101,8 +102,8 @@ static int pd_power_down(struct generic_pm_domain *genpd) } if (!sh7372_pd->no_debug) - pr_debug("sh7372 power domain down 0x%08x -> PSTR = 0x%08x\n", - mask, __raw_readl(PSTR)); + pr_debug("%s: Power off, 0x%08x -> PSTR = 0x%08x\n", + genpd->name, mask, __raw_readl(PSTR)); return 0; } @@ -113,9 +114,6 @@ static int __pd_power_up(struct sh7372_pm_domain *sh7372_pd, bool do_resume) unsigned int retry_count; int ret = 0; - if (sh7372_pd->stay_on) - goto out; - if (__raw_readl(PSTR) & mask) goto out; @@ -133,8 +131,8 @@ static int __pd_power_up(struct sh7372_pm_domain *sh7372_pd, bool do_resume) ret = -EIO; if (!sh7372_pd->no_debug) - pr_debug("sh7372 power domain up 0x%08x -> PSTR = 0x%08x\n", - mask, __raw_readl(PSTR)); + pr_debug("%s: Power on, 0x%08x -> PSTR = 0x%08x\n", + sh7372_pd->genpd.name, mask, __raw_readl(PSTR)); out: if (ret == 0 && sh7372_pd->resume && do_resume) @@ -148,35 +146,60 @@ static int pd_power_up(struct generic_pm_domain *genpd) return __pd_power_up(to_sh7372_pd(genpd), true); } -static void sh7372_a4r_suspend(void) +static int sh7372_a4r_suspend(void) { sh7372_intcs_suspend(); __raw_writel(0x300fffff, WUPRMSK); /* avoid wakeup */ + return 0; } static bool pd_active_wakeup(struct device *dev) { - return true; + bool (*active_wakeup)(struct device *dev); + + active_wakeup = dev_gpd_data(dev)->ops.active_wakeup; + return active_wakeup ? active_wakeup(dev) : true; } -static bool sh7372_power_down_forbidden(struct dev_pm_domain *domain) +static int sh7372_stop_dev(struct device *dev) { - return false; + int (*stop)(struct device *dev); + + stop = dev_gpd_data(dev)->ops.stop; + if (stop) { + int ret = stop(dev); + if (ret) + return ret; + } + return pm_clk_suspend(dev); } -struct dev_power_governor sh7372_always_on_gov = { - .power_down_ok = sh7372_power_down_forbidden, -}; +static int sh7372_start_dev(struct device *dev) +{ + int (*start)(struct device *dev); + int ret; + + ret = pm_clk_resume(dev); + if (ret) + return ret; + + start = dev_gpd_data(dev)->ops.start; + if (start) + ret = start(dev); + + return ret; +} void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd) { struct generic_pm_domain *genpd = &sh7372_pd->genpd; + struct dev_power_governor *gov = sh7372_pd->gov; - pm_genpd_init(genpd, sh7372_pd->gov, false); - genpd->stop_device = pm_clk_suspend; - genpd->start_device = pm_clk_resume; + pm_genpd_init(genpd, gov ? : &simple_qos_governor, false); + genpd->dev_ops.stop = sh7372_stop_dev; + genpd->dev_ops.start = sh7372_start_dev; + genpd->dev_ops.active_wakeup = pd_active_wakeup; genpd->dev_irq_safe = true; - genpd->active_wakeup = pd_active_wakeup; genpd->power_off = pd_power_down; genpd->power_on = pd_power_up; __pd_power_up(sh7372_pd, false); @@ -199,48 +222,73 @@ void sh7372_pm_add_subdomain(struct sh7372_pm_domain *sh7372_pd, } struct sh7372_pm_domain sh7372_a4lc = { + .genpd.name = "A4LC", .bit_shift = 1, }; struct sh7372_pm_domain sh7372_a4mp = { + .genpd.name = "A4MP", .bit_shift = 2, }; struct sh7372_pm_domain sh7372_d4 = { + .genpd.name = "D4", .bit_shift = 3, }; struct sh7372_pm_domain sh7372_a4r = { + .genpd.name = "A4R", .bit_shift = 5, - .gov = &sh7372_always_on_gov, .suspend = sh7372_a4r_suspend, .resume = sh7372_intcs_resume, - .stay_on = true, }; struct sh7372_pm_domain sh7372_a3rv = { + .genpd.name = "A3RV", .bit_shift = 6, }; struct sh7372_pm_domain sh7372_a3ri = { + .genpd.name = "A3RI", .bit_shift = 8, }; -struct sh7372_pm_domain sh7372_a3sp = { - .bit_shift = 11, - .gov = &sh7372_always_on_gov, +static int sh7372_a4s_suspend(void) +{ + /* + * The A4S domain contains the CPU core and therefore it should + * only be turned off if the CPU is in use. + */ + return -EBUSY; +} + +struct sh7372_pm_domain sh7372_a4s = { + .genpd.name = "A4S", + .bit_shift = 10, + .gov = &pm_domain_always_on_gov, .no_debug = true, + .suspend = sh7372_a4s_suspend, }; -static void sh7372_a3sp_init(void) +static int sh7372_a3sp_suspend(void) { - /* serial consoles make use of SCIF hardware located in A3SP, + /* + * Serial consoles make use of SCIF hardware located in A3SP, * keep such power domain on if "no_console_suspend" is set. */ - sh7372_a3sp.stay_on = !console_suspend_enabled; + return console_suspend_enabled ? -EBUSY : 0; } +struct sh7372_pm_domain sh7372_a3sp = { + .genpd.name = "A3SP", + .bit_shift = 11, + .gov = &pm_domain_always_on_gov, + .no_debug = true, + .suspend = sh7372_a3sp_suspend, +}; + struct sh7372_pm_domain sh7372_a3sg = { + .genpd.name = "A3SG", .bit_shift = 13, }; @@ -257,11 +305,16 @@ static int sh7372_do_idle_core_standby(unsigned long unused) return 0; } -static void sh7372_enter_core_standby(void) +static void sh7372_set_reset_vector(unsigned long address) { /* set reset vector, translate 4k */ - __raw_writel(__pa(sh7372_resume_core_standby_a3sm), SBAR); + __raw_writel(address, SBAR); __raw_writel(0, APARMBAREA); +} + +static void sh7372_enter_core_standby(void) +{ + sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc)); /* enter sleep mode with SYSTBCR to 0x10 */ __raw_writel(0x10, SYSTBCR); @@ -274,27 +327,22 @@ static void sh7372_enter_core_standby(void) #endif #ifdef CONFIG_SUSPEND -static void sh7372_enter_a3sm_common(int pllc0_on) +static void sh7372_enter_sysc(int pllc0_on, unsigned long sleep_mode) { - /* set reset vector, translate 4k */ - __raw_writel(__pa(sh7372_resume_core_standby_a3sm), SBAR); - __raw_writel(0, APARMBAREA); - if (pllc0_on) __raw_writel(0, PLLC01STPCR); else __raw_writel(1 << 28, PLLC01STPCR); - __raw_writel(0, PDNSEL); /* power-down A3SM only, not A4S */ __raw_readl(WUPSFAC); /* read wakeup int. factor before sleep */ - cpu_suspend(0, sh7372_do_idle_a3sm); + cpu_suspend(sleep_mode, sh7372_do_idle_sysc); __raw_readl(WUPSFAC); /* read wakeup int. factor after wakeup */ /* disable reset vector translation */ __raw_writel(0, SBAR); } -static int sh7372_a3sm_valid(unsigned long *mskp, unsigned long *msk2p) +static int sh7372_sysc_valid(unsigned long *mskp, unsigned long *msk2p) { unsigned long mstpsr0, mstpsr1, mstpsr2, mstpsr3, mstpsr4; unsigned long msk, msk2; @@ -382,7 +430,7 @@ static void sh7372_icr_to_irqcr(unsigned long icr, u16 *irqcr1p, u16 *irqcr2p) *irqcr2p = irqcr2; } -static void sh7372_setup_a3sm(unsigned long msk, unsigned long msk2) +static void sh7372_setup_sysc(unsigned long msk, unsigned long msk2) { u16 irqcrx_low, irqcrx_high, irqcry_low, irqcry_high; unsigned long tmp; @@ -415,6 +463,22 @@ static void sh7372_setup_a3sm(unsigned long msk, unsigned long msk2) __raw_writel((irqcrx_high << 16) | irqcrx_low, IRQCR3); __raw_writel((irqcry_high << 16) | irqcry_low, IRQCR4); } + +static void sh7372_enter_a3sm_common(int pllc0_on) +{ + sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc)); + sh7372_enter_sysc(pllc0_on, 1 << 12); +} + +static void sh7372_enter_a4s_common(int pllc0_on) +{ + sh7372_intca_suspend(); + memcpy((void *)SMFRAM, sh7372_resume_core_standby_sysc, 0x100); + sh7372_set_reset_vector(SMFRAM); + sh7372_enter_sysc(pllc0_on, 1 << 10); + sh7372_intca_resume(); +} + #endif #ifdef CONFIG_CPU_IDLE @@ -448,14 +512,20 @@ static int sh7372_enter_suspend(suspend_state_t suspend_state) unsigned long msk, msk2; /* check active clocks to determine potential wakeup sources */ - if (sh7372_a3sm_valid(&msk, &msk2)) { - + if (sh7372_sysc_valid(&msk, &msk2)) { /* convert INTC mask and sense to SYSC mask and sense */ - sh7372_setup_a3sm(msk, msk2); - - /* enter A3SM sleep with PLLC0 off */ - pr_debug("entering A3SM\n"); - sh7372_enter_a3sm_common(0); + sh7372_setup_sysc(msk, msk2); + + if (!console_suspend_enabled && + sh7372_a4s.genpd.status == GPD_STATE_POWER_OFF) { + /* enter A4S sleep with PLLC0 off */ + pr_debug("entering A4S\n"); + sh7372_enter_a4s_common(0); + } else { + /* enter A3SM sleep with PLLC0 off */ + pr_debug("entering A3SM\n"); + sh7372_enter_a3sm_common(0); + } } else { /* default to Core Standby that supports all wakeup sources */ pr_debug("entering Core Standby\n"); @@ -464,9 +534,37 @@ static int sh7372_enter_suspend(suspend_state_t suspend_state) return 0; } +/** + * sh7372_pm_notifier_fn - SH7372 PM notifier routine. + * @notifier: Unused. + * @pm_event: Event being handled. + * @unused: Unused. + */ +static int sh7372_pm_notifier_fn(struct notifier_block *notifier, + unsigned long pm_event, void *unused) +{ + switch (pm_event) { + case PM_SUSPEND_PREPARE: + /* + * This is necessary, because the A4R domain has to be "on" + * when suspend_device_irqs() and resume_device_irqs() are + * executed during system suspend and resume, respectively, so + * that those functions don't crash while accessing the INTCS. + */ + pm_genpd_poweron(&sh7372_a4r.genpd); + break; + case PM_POST_SUSPEND: + pm_genpd_poweroff_unused(); + break; + } + + return NOTIFY_DONE; +} + static void sh7372_suspend_init(void) { shmobile_suspend_ops.enter = sh7372_enter_suspend; + pm_notifier(sh7372_pm_notifier_fn, 0); } #else static void sh7372_suspend_init(void) {} @@ -482,8 +580,6 @@ void __init sh7372_pm_init(void) /* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */ __raw_writel(0, PDNSEL); - sh7372_a3sp_init(); - sh7372_suspend_init(); sh7372_cpuidle_init(); } diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 2380389e6ac5..c197f9d29d04 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -994,12 +994,16 @@ void __init sh7372_add_standard_devices(void) sh7372_init_pm_domain(&sh7372_a4r); sh7372_init_pm_domain(&sh7372_a3rv); sh7372_init_pm_domain(&sh7372_a3ri); - sh7372_init_pm_domain(&sh7372_a3sg); + sh7372_init_pm_domain(&sh7372_a4s); sh7372_init_pm_domain(&sh7372_a3sp); + sh7372_init_pm_domain(&sh7372_a3sg); sh7372_pm_add_subdomain(&sh7372_a4lc, &sh7372_a3rv); sh7372_pm_add_subdomain(&sh7372_a4r, &sh7372_a4lc); + sh7372_pm_add_subdomain(&sh7372_a4s, &sh7372_a3sg); + sh7372_pm_add_subdomain(&sh7372_a4s, &sh7372_a3sp); + platform_add_devices(sh7372_early_devices, ARRAY_SIZE(sh7372_early_devices)); diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S index f3ab3c5810ea..1d564674451d 100644 --- a/arch/arm/mach-shmobile/sleep-sh7372.S +++ b/arch/arm/mach-shmobile/sleep-sh7372.S @@ -37,13 +37,18 @@ #if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE) .align 12 .text - .global sh7372_resume_core_standby_a3sm -sh7372_resume_core_standby_a3sm: + .global sh7372_resume_core_standby_sysc +sh7372_resume_core_standby_sysc: ldr pc, 1f 1: .long cpu_resume - PAGE_OFFSET + PLAT_PHYS_OFFSET - .global sh7372_do_idle_a3sm -sh7372_do_idle_a3sm: +#define SPDCR 0xe6180008 + + /* A3SM & A4S power down */ + .global sh7372_do_idle_sysc +sh7372_do_idle_sysc: + mov r8, r0 /* sleep mode passed in r0 */ + /* * Clear the SCTLR.C bit to prevent further data cache * allocation. Clearing SCTLR.C would make all the data accesses @@ -80,13 +85,9 @@ sh7372_do_idle_a3sm: dsb dmb -#define SPDCR 0xe6180008 -#define A3SM (1 << 12) - - /* A3SM power down */ + /* SYSC power down */ ldr r0, =SPDCR - ldr r1, =A3SM - str r1, [r0] + str r8, [r0] 1: b 1b diff --git a/arch/arm/mach-spear3xx/include/mach/entry-macro.S b/arch/arm/mach-spear3xx/include/mach/entry-macro.S index 53da4224ba3d..de3bb41c8e9e 100644 --- a/arch/arm/mach-spear3xx/include/mach/entry-macro.S +++ b/arch/arm/mach-spear3xx/include/mach/entry-macro.S @@ -11,35 +11,8 @@ * warranty of any kind, whether express or implied. */ -#include <asm/hardware/vic.h> -#include <mach/hardware.h> - .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =VA_SPEAR3XX_ML1_VIC_BASE - ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get status - teq \irqstat, #0 - beq 1001f @ this will set/reset - @ zero register - /* - * Following code will find bit position of least significang - * bit set in irqstat, using following equation - * least significant bit set in n = (n & ~(n-1)) - */ - sub \tmp, \irqstat, #1 @ tmp = irqstat - 1 - mvn \tmp, \tmp @ tmp = ~tmp - and \irqstat, \irqstat, \tmp @ irqstat &= tmp - /* Now, irqstat is = bit no. of 1st bit set in vic irq status */ - clz \tmp, \irqstat @ tmp = leading zeros - rsb \irqnr, \tmp, #0x1F @ irqnr = 32 - tmp - 1 - -1001: /* EQ will be set if no irqs pending */ - .endm diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index b8f31c3935f7..14276e5a98d2 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -42,6 +42,8 @@ void __init spear3xx_map_io(void); void __init spear3xx_init_irq(void); void __init spear3xx_init(void); +void spear_restart(char, const char *); + /* pad mux declarations */ #define PMX_FIRDA_MASK (1 << 14) #define PMX_I2C_MASK (1 << 13) diff --git a/arch/arm/mach-spear3xx/include/mach/vmalloc.h b/arch/arm/mach-spear3xx/include/mach/vmalloc.h deleted file mode 100644 index df977b3c9a63..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/vmalloc.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/vmalloc.h - * - * Defining Vmalloc area for SPEAr3xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_VMALLOC_H -#define __MACH_VMALLOC_H - -#include <plat/vmalloc.h> - -#endif /* __MACH_VMALLOC_H */ diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c index a5ff98eed1db..3462ab9d6122 100644 --- a/arch/arm/mach-spear3xx/spear300_evb.c +++ b/arch/arm/mach-spear3xx/spear300_evb.c @@ -11,6 +11,7 @@ * warranty of any kind, whether express or implied. */ +#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include <mach/generic.h> @@ -67,6 +68,8 @@ MACHINE_START(SPEAR300, "ST-SPEAR300-EVB") .atag_offset = 0x100, .map_io = spear3xx_map_io, .init_irq = spear3xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &spear3xx_timer, .init_machine = spear300_evb_init, + .restart = spear_restart, MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c index 45d180d59362..f92c4993f65a 100644 --- a/arch/arm/mach-spear3xx/spear310_evb.c +++ b/arch/arm/mach-spear3xx/spear310_evb.c @@ -11,6 +11,7 @@ * warranty of any kind, whether express or implied. */ +#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include <mach/generic.h> @@ -73,6 +74,8 @@ MACHINE_START(SPEAR310, "ST-SPEAR310-EVB") .atag_offset = 0x100, .map_io = spear3xx_map_io, .init_irq = spear3xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &spear3xx_timer, .init_machine = spear310_evb_init, + .restart = spear_restart, MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c index 22879848d73a..105334ab7021 100644 --- a/arch/arm/mach-spear3xx/spear320_evb.c +++ b/arch/arm/mach-spear3xx/spear320_evb.c @@ -11,6 +11,7 @@ * warranty of any kind, whether express or implied. */ +#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include <mach/generic.h> @@ -71,6 +72,8 @@ MACHINE_START(SPEAR320, "ST-SPEAR320-EVB") .atag_offset = 0x100, .map_io = spear3xx_map_io, .init_irq = spear3xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &spear3xx_timer, .init_machine = spear320_evb_init, + .restart = spear_restart, MACHINE_END diff --git a/arch/arm/mach-spear6xx/include/mach/entry-macro.S b/arch/arm/mach-spear6xx/include/mach/entry-macro.S index 8a0b0ed7b203..d490a910d925 100644 --- a/arch/arm/mach-spear6xx/include/mach/entry-macro.S +++ b/arch/arm/mach-spear6xx/include/mach/entry-macro.S @@ -11,44 +11,8 @@ * warranty of any kind, whether express or implied. */ -#include <asm/hardware/vic.h> -#include <mach/hardware.h> - .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =VA_SPEAR6XX_CPU_VIC_PRI_BASE - ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get status - mov \irqnr, #0 - teq \irqstat, #0 - bne 1001f - ldr \base, =VA_SPEAR6XX_CPU_VIC_SEC_BASE - ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get status - teq \irqstat, #0 - beq 1002f @ this will set/reset - @ zero register - mov \irqnr, #32 -1001: - /* - * Following code will find bit position of least significang - * bit set in irqstat, using following equation - * least significant bit set in n = (n & ~(n-1)) - */ - sub \tmp, \irqstat, #1 @ tmp = irqstat - 1 - mvn \tmp, \tmp @ tmp = ~tmp - and \irqstat, \irqstat, \tmp @ irqstat &= tmp - /* Now, irqstat is = bit no. of 1st bit set in vic irq status */ - clz \tmp, \irqstat @ tmp = leading zeros - - rsb \tmp, \tmp, #0x1F @ tmp = 32 - tmp - 1 - add \irqnr, \irqnr, \tmp - -1002: /* EQ will be set if no irqs pending */ - .endm diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h index 183f0238c5e2..116b99301cf5 100644 --- a/arch/arm/mach-spear6xx/include/mach/generic.h +++ b/arch/arm/mach-spear6xx/include/mach/generic.h @@ -41,6 +41,8 @@ void __init spear6xx_init(void); void __init spear600_init(void); void __init spear6xx_clk_init(void); +void spear_restart(char, const char *); + /* Add spear600 machine device structure declarations here */ #endif /* __MACH_GENERIC_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/vmalloc.h b/arch/arm/mach-spear6xx/include/mach/vmalloc.h deleted file mode 100644 index 4a0b56cb2a91..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/vmalloc.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/vmalloc.h - * - * Defining Vmalloc area for SPEAr6xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_VMALLOC_H -#define __MACH_VMALLOC_H - -#include <plat/vmalloc.h> - -#endif /* __MACH_VMALLOC_H */ diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c index 8238fe38e713..c6e4254741cc 100644 --- a/arch/arm/mach-spear6xx/spear600_evb.c +++ b/arch/arm/mach-spear6xx/spear600_evb.c @@ -11,6 +11,7 @@ * warranty of any kind, whether express or implied. */ +#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include <mach/generic.h> @@ -46,6 +47,8 @@ MACHINE_START(SPEAR600, "ST-SPEAR600-EVB") .atag_offset = 0x100, .map_io = spear6xx_map_io, .init_irq = spear6xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &spear6xx_timer, .init_machine = spear600_evb_init, + .restart = spear_restart, MACHINE_END diff --git a/arch/arm/mach-tcc8k/Kconfig b/arch/arm/mach-tcc8k/Kconfig deleted file mode 100644 index ad86415d1577..000000000000 --- a/arch/arm/mach-tcc8k/Kconfig +++ /dev/null @@ -1,11 +0,0 @@ -if ARCH_TCC8K - -comment "TCC8000 systems:" - -config MACH_TCC8000_SDK - bool "Telechips TCC8000-SDK development kit" - default y - help - Support for the Telechips TCC8000-SDK board. - -endif diff --git a/arch/arm/mach-tcc8k/Makefile b/arch/arm/mach-tcc8k/Makefile deleted file mode 100644 index 9bacf31e49ba..000000000000 --- a/arch/arm/mach-tcc8k/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Makefile for TCC8K boards and common files. -# - -# Common support -obj-y += clock.o irq.o time.o io.o devices.o - -# Board specific support -obj-$(CONFIG_MACH_TCC8000_SDK) += board-tcc8000-sdk.o diff --git a/arch/arm/mach-tcc8k/Makefile.boot b/arch/arm/mach-tcc8k/Makefile.boot deleted file mode 100644 index 5e02d4156b04..000000000000 --- a/arch/arm/mach-tcc8k/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x20008000 -params_phys-y := 0x20000100 -initrd_phys-y := 0x20800000 diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c deleted file mode 100644 index 777a5bb9eed2..000000000000 --- a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> - -#include <mach/clock.h> -#include <mach/tcc-nand.h> -#include <mach/tcc8k-regs.h> - -#include "common.h" - -#define XI_FREQUENCY 12000000 -#define XTI_FREQUENCY 32768 - -#ifdef CONFIG_MTD_NAND_TCC -/* NAND */ -static struct tcc_nand_platform_data tcc8k_sdk_nand_data = { - .width = 1, - .hw_ecc = 0, -}; -#endif - -static void __init tcc8k_init(void) -{ -#ifdef CONFIG_MTD_NAND_TCC - tcc_nand_device.dev.platform_data = &tcc8k_sdk_nand_data; - platform_device_register(&tcc_nand_device); -#endif -} - -static void __init tcc8k_init_timer(void) -{ - tcc_clocks_init(XI_FREQUENCY, XTI_FREQUENCY); -} - -static struct sys_timer tcc8k_timer = { - .init = tcc8k_init_timer, -}; - -static void __init tcc8k_map_io(void) -{ - tcc8k_map_common_io(); - - /* set PLL0 clock to 96MHz, adapt UART0 divisor */ - __raw_writel(0x00026003, CKC_BASE + PLL0CFG_OFFS); - __raw_writel(0x10000001, CKC_BASE + ACLKUART0_OFFS); - - /* set PLL1 clock to 192MHz */ - __raw_writel(0x00016003, CKC_BASE + PLL1CFG_OFFS); - - /* set PLL2 clock to 48MHz */ - __raw_writel(0x00036003, CKC_BASE + PLL2CFG_OFFS); - - /* with CPU freq higher than 150 MHz, need extra DTCM wait */ - __raw_writel(0x00000001, SCFG_BASE + DTCMWAIT_OFFS); - - /* PLL locking time as specified */ - udelay(300); -} - -MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board") - .atag_offset = 0x100, - .map_io = tcc8k_map_io, - .init_irq = tcc8k_init_irq, - .init_machine = tcc8k_init, - .timer = &tcc8k_timer, -MACHINE_END diff --git a/arch/arm/mach-tcc8k/clock.c b/arch/arm/mach-tcc8k/clock.c deleted file mode 100644 index e7cdae5c77a4..000000000000 --- a/arch/arm/mach-tcc8k/clock.c +++ /dev/null @@ -1,580 +0,0 @@ -/* - * Lowlevel clock handling for Telechips TCC8xxx SoCs - * - * Copyright (C) 2010 by Hans J. Koch <hjk@linutronix.de> - * - * Licensed under the terms of the GPL v2 - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/clkdev.h> - -#include <mach/clock.h> -#include <mach/irqs.h> -#include <mach/tcc8k-regs.h> - -#include "common.h" - -#define BCLKCTR0 (CKC_BASE + BCLKCTR0_OFFS) -#define BCLKCTR1 (CKC_BASE + BCLKCTR1_OFFS) - -#define ACLKREF (CKC_BASE + ACLKREF_OFFS) -#define ACLKUART0 (CKC_BASE + ACLKUART0_OFFS) -#define ACLKUART1 (CKC_BASE + ACLKUART1_OFFS) -#define ACLKUART2 (CKC_BASE + ACLKUART2_OFFS) -#define ACLKUART3 (CKC_BASE + ACLKUART3_OFFS) -#define ACLKUART4 (CKC_BASE + ACLKUART4_OFFS) -#define ACLKI2C (CKC_BASE + ACLKI2C_OFFS) -#define ACLKADC (CKC_BASE + ACLKADC_OFFS) -#define ACLKUSBH (CKC_BASE + ACLKUSBH_OFFS) -#define ACLKLCD (CKC_BASE + ACLKLCD_OFFS) -#define ACLKSDH0 (CKC_BASE + ACLKSDH0_OFFS) -#define ACLKSDH1 (CKC_BASE + ACLKSDH1_OFFS) -#define ACLKSPI0 (CKC_BASE + ACLKSPI0_OFFS) -#define ACLKSPI1 (CKC_BASE + ACLKSPI1_OFFS) -#define ACLKSPDIF (CKC_BASE + ACLKSPDIF_OFFS) -#define ACLKC3DEC (CKC_BASE + ACLKC3DEC_OFFS) -#define ACLKCAN0 (CKC_BASE + ACLKCAN0_OFFS) -#define ACLKCAN1 (CKC_BASE + ACLKCAN1_OFFS) -#define ACLKGSB0 (CKC_BASE + ACLKGSB0_OFFS) -#define ACLKGSB1 (CKC_BASE + ACLKGSB1_OFFS) -#define ACLKGSB2 (CKC_BASE + ACLKGSB2_OFFS) -#define ACLKGSB3 (CKC_BASE + ACLKGSB3_OFFS) -#define ACLKTCT (CKC_BASE + ACLKTCT_OFFS) -#define ACLKTCX (CKC_BASE + ACLKTCX_OFFS) -#define ACLKTCZ (CKC_BASE + ACLKTCZ_OFFS) - -#define ACLK_MAX_DIV (0xfff + 1) - -/* Crystal frequencies */ -static unsigned long xi_rate, xti_rate; - -static void __iomem *pll_cfg_addr(int pll) -{ - switch (pll) { - case 0: return (CKC_BASE + PLL0CFG_OFFS); - case 1: return (CKC_BASE + PLL1CFG_OFFS); - case 2: return (CKC_BASE + PLL2CFG_OFFS); - default: - BUG(); - } -} - -static int pll_enable(int pll, int enable) -{ - u32 reg; - void __iomem *addr = pll_cfg_addr(pll); - - reg = __raw_readl(addr); - if (enable) - reg &= ~PLLxCFG_PD; - else - reg |= PLLxCFG_PD; - - __raw_writel(reg, addr); - return 0; -} - -static int xi_enable(int enable) -{ - u32 reg; - - reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS); - if (enable) - reg |= CLKCTRL_XE; - else - reg &= ~CLKCTRL_XE; - - __raw_writel(reg, CKC_BASE + CLKCTRL_OFFS); - return 0; -} - -static int root_clk_enable(enum root_clks src) -{ - switch (src) { - case CLK_SRC_PLL0: return pll_enable(0, 1); - case CLK_SRC_PLL1: return pll_enable(1, 1); - case CLK_SRC_PLL2: return pll_enable(2, 1); - case CLK_SRC_XI: return xi_enable(1); - default: - BUG(); - } - return 0; -} - -static int root_clk_disable(enum root_clks src) -{ - switch (src) { - case CLK_SRC_PLL0: return pll_enable(0, 0); - case CLK_SRC_PLL1: return pll_enable(1, 0); - case CLK_SRC_PLL2: return pll_enable(2, 0); - case CLK_SRC_XI: return xi_enable(0); - default: - BUG(); - } - return 0; -} - -static int enable_clk(struct clk *clk) -{ - u32 reg; - - if (clk->root_id != CLK_SRC_NOROOT) - return root_clk_enable(clk->root_id); - - if (clk->aclkreg) { - reg = __raw_readl(clk->aclkreg); - reg |= ACLK_EN; - __raw_writel(reg, clk->aclkreg); - } - if (clk->bclkctr) { - reg = __raw_readl(clk->bclkctr); - reg |= 1 << clk->bclk_shift; - __raw_writel(reg, clk->bclkctr); - } - return 0; -} - -static void disable_clk(struct clk *clk) -{ - u32 reg; - - if (clk->root_id != CLK_SRC_NOROOT) { - root_clk_disable(clk->root_id); - return; - } - - if (clk->bclkctr) { - reg = __raw_readl(clk->bclkctr); - reg &= ~(1 << clk->bclk_shift); - __raw_writel(reg, clk->bclkctr); - } - if (clk->aclkreg) { - reg = __raw_readl(clk->aclkreg); - reg &= ~ACLK_EN; - __raw_writel(reg, clk->aclkreg); - } -} - -static unsigned long get_rate_pll(int pll) -{ - u32 reg; - unsigned long s, m, p; - void __iomem *addr = pll_cfg_addr(pll); - - reg = __raw_readl(addr); - s = (reg >> 16) & 0x07; - m = (reg >> 8) & 0xff; - p = reg & 0x3f; - - return (m * xi_rate) / (p * (1 << s)); -} - -static unsigned long get_rate_pll_div(int pll) -{ - u32 reg; - unsigned long div = 0; - void __iomem *addr; - - switch (pll) { - case 0: - addr = CKC_BASE + CLKDIVC0_OFFS; - reg = __raw_readl(addr); - if (reg & CLKDIVC0_P0E) - div = (reg >> 24) & 0x3f; - break; - case 1: - addr = CKC_BASE + CLKDIVC0_OFFS; - reg = __raw_readl(addr); - if (reg & CLKDIVC0_P1E) - div = (reg >> 16) & 0x3f; - break; - case 2: - addr = CKC_BASE + CLKDIVC1_OFFS; - reg = __raw_readl(addr); - if (reg & CLKDIVC1_P2E) - div = reg & 0x3f; - break; - } - return get_rate_pll(pll) / (div + 1); -} - -static unsigned long get_rate_xi_div(void) -{ - unsigned long div = 0; - u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS); - - if (reg & CLKDIVC0_XE) - div = (reg >> 8) & 0x3f; - - return xi_rate / (div + 1); -} - -static unsigned long get_rate_xti_div(void) -{ - unsigned long div = 0; - u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS); - - if (reg & CLKDIVC0_XTE) - div = reg & 0x3f; - - return xti_rate / (div + 1); -} - -static unsigned long root_clk_get_rate(enum root_clks src) -{ - switch (src) { - case CLK_SRC_PLL0: return get_rate_pll(0); - case CLK_SRC_PLL1: return get_rate_pll(1); - case CLK_SRC_PLL2: return get_rate_pll(2); - case CLK_SRC_PLL0DIV: return get_rate_pll_div(0); - case CLK_SRC_PLL1DIV: return get_rate_pll_div(1); - case CLK_SRC_PLL2DIV: return get_rate_pll_div(2); - case CLK_SRC_XI: return xi_rate; - case CLK_SRC_XTI: return xti_rate; - case CLK_SRC_XIDIV: return get_rate_xi_div(); - case CLK_SRC_XTIDIV: return get_rate_xti_div(); - default: return 0; - } -} - -static unsigned long aclk_get_rate(struct clk *clk) -{ - u32 reg; - unsigned long div; - unsigned int src; - - reg = __raw_readl(clk->aclkreg); - div = reg & 0x0fff; - src = (reg >> ACLK_SEL_SHIFT) & CLK_SRC_MASK; - return root_clk_get_rate(src) / (div + 1); -} - -static unsigned long aclk_best_div(struct clk *clk, unsigned long rate) -{ - unsigned long div, src, freq, r1, r2; - - if (!rate) - return ACLK_MAX_DIV; - - src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT; - src &= CLK_SRC_MASK; - freq = root_clk_get_rate(src); - div = freq / rate; - if (!div) - return 1; - if (div >= ACLK_MAX_DIV) - return ACLK_MAX_DIV; - r1 = freq / div; - r2 = freq / (div + 1); - if ((rate - r2) < (r1 - rate)) - return div + 1; - - return div; -} - -static unsigned long aclk_round_rate(struct clk *clk, unsigned long rate) -{ - unsigned int src; - - src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT; - src &= CLK_SRC_MASK; - - return root_clk_get_rate(src) / aclk_best_div(clk, rate); -} - -static int aclk_set_rate(struct clk *clk, unsigned long rate) -{ - u32 reg; - - reg = __raw_readl(clk->aclkreg) & ~ACLK_DIV_MASK; - reg |= aclk_best_div(clk, rate) - 1; - __raw_writel(reg, clk->aclkreg); - return 0; -} - -static unsigned long get_rate_sys(struct clk *clk) -{ - unsigned int src; - - src = __raw_readl(CKC_BASE + CLKCTRL_OFFS) & CLK_SRC_MASK; - return root_clk_get_rate(src); -} - -static unsigned long get_rate_bus(struct clk *clk) -{ - unsigned int reg, sdiv, bdiv, rate; - - reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS); - rate = get_rate_sys(clk); - sdiv = (reg >> 20) & 3; - if (sdiv) - rate /= sdiv + 1; - bdiv = (reg >> 4) & 0xff; - if (bdiv) - rate /= bdiv + 1; - return rate; -} - -static unsigned long get_rate_cpu(struct clk *clk) -{ - unsigned int reg, div, fsys, fbus; - - fbus = get_rate_bus(clk); - reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS); - if (reg & (1 << 29)) - return fbus; - fsys = get_rate_sys(clk); - div = (reg >> 16) & 0x0f; - return fbus + ((fsys - fbus) * (div + 1)) / 16; -} - -static unsigned long get_rate_root(struct clk *clk) -{ - return root_clk_get_rate(clk->root_id); -} - -static int aclk_set_parent(struct clk *clock, struct clk *parent) -{ - u32 reg; - - if (clock->parent == parent) - return 0; - - clock->parent = parent; - - if (!parent) - return 0; - - if (parent->root_id == CLK_SRC_NOROOT) - return 0; - reg = __raw_readl(clock->aclkreg); - reg &= ~ACLK_SEL_MASK; - reg |= (parent->root_id << ACLK_SEL_SHIFT) & ACLK_SEL_MASK; - __raw_writel(reg, clock->aclkreg); - - return 0; -} - -#define DEFINE_ROOT_CLOCK(name, ri, p) \ - static struct clk name = { \ - .root_id = ri, \ - .get_rate = get_rate_root, \ - .enable = enable_clk, \ - .disable = disable_clk, \ - .parent = p, \ - }; - -#define DEFINE_SPECIAL_CLOCK(name, gr, p) \ - static struct clk name = { \ - .root_id = CLK_SRC_NOROOT, \ - .get_rate = gr, \ - .parent = p, \ - }; - -#define DEFINE_ACLOCK(name, bc, bs, ar) \ - static struct clk name = { \ - .root_id = CLK_SRC_NOROOT, \ - .bclkctr = bc, \ - .bclk_shift = bs, \ - .aclkreg = ar, \ - .get_rate = aclk_get_rate, \ - .set_rate = aclk_set_rate, \ - .round_rate = aclk_round_rate, \ - .enable = enable_clk, \ - .disable = disable_clk, \ - .set_parent = aclk_set_parent, \ - }; - -#define DEFINE_BCLOCK(name, bc, bs, gr, p) \ - static struct clk name = { \ - .root_id = CLK_SRC_NOROOT, \ - .bclkctr = bc, \ - .bclk_shift = bs, \ - .get_rate = gr, \ - .enable = enable_clk, \ - .disable = disable_clk, \ - .parent = p, \ - }; - -DEFINE_ROOT_CLOCK(xi, CLK_SRC_XI, NULL) -DEFINE_ROOT_CLOCK(xti, CLK_SRC_XTI, NULL) -DEFINE_ROOT_CLOCK(xidiv, CLK_SRC_XIDIV, &xi) -DEFINE_ROOT_CLOCK(xtidiv, CLK_SRC_XTIDIV, &xti) -DEFINE_ROOT_CLOCK(pll0, CLK_SRC_PLL0, &xi) -DEFINE_ROOT_CLOCK(pll1, CLK_SRC_PLL1, &xi) -DEFINE_ROOT_CLOCK(pll2, CLK_SRC_PLL2, &xi) -DEFINE_ROOT_CLOCK(pll0div, CLK_SRC_PLL0DIV, &pll0) -DEFINE_ROOT_CLOCK(pll1div, CLK_SRC_PLL1DIV, &pll1) -DEFINE_ROOT_CLOCK(pll2div, CLK_SRC_PLL2DIV, &pll2) - -/* The following 3 clocks are special and are initialized explicitly later */ -DEFINE_SPECIAL_CLOCK(sys, get_rate_sys, NULL) -DEFINE_SPECIAL_CLOCK(bus, get_rate_bus, &sys) -DEFINE_SPECIAL_CLOCK(cpu, get_rate_cpu, &sys) - -DEFINE_ACLOCK(tct, NULL, 0, ACLKTCT) -DEFINE_ACLOCK(tcx, NULL, 0, ACLKTCX) -DEFINE_ACLOCK(tcz, NULL, 0, ACLKTCZ) -DEFINE_ACLOCK(ref, NULL, 0, ACLKREF) -DEFINE_ACLOCK(uart0, BCLKCTR0, 5, ACLKUART0) -DEFINE_ACLOCK(uart1, BCLKCTR0, 23, ACLKUART1) -DEFINE_ACLOCK(uart2, BCLKCTR0, 6, ACLKUART2) -DEFINE_ACLOCK(uart3, BCLKCTR0, 8, ACLKUART3) -DEFINE_ACLOCK(uart4, BCLKCTR1, 6, ACLKUART4) -DEFINE_ACLOCK(i2c, BCLKCTR0, 7, ACLKI2C) -DEFINE_ACLOCK(adc, BCLKCTR0, 10, ACLKADC) -DEFINE_ACLOCK(usbh0, BCLKCTR0, 11, ACLKUSBH) -DEFINE_ACLOCK(lcd, BCLKCTR0, 13, ACLKLCD) -DEFINE_ACLOCK(sd0, BCLKCTR0, 17, ACLKSDH0) -DEFINE_ACLOCK(sd1, BCLKCTR1, 5, ACLKSDH1) -DEFINE_ACLOCK(spi0, BCLKCTR0, 24, ACLKSPI0) -DEFINE_ACLOCK(spi1, BCLKCTR0, 30, ACLKSPI1) -DEFINE_ACLOCK(spdif, BCLKCTR1, 2, ACLKSPDIF) -DEFINE_ACLOCK(c3dec, BCLKCTR1, 9, ACLKC3DEC) -DEFINE_ACLOCK(can0, BCLKCTR1, 10, ACLKCAN0) -DEFINE_ACLOCK(can1, BCLKCTR1, 11, ACLKCAN1) -DEFINE_ACLOCK(gsb0, BCLKCTR1, 13, ACLKGSB0) -DEFINE_ACLOCK(gsb1, BCLKCTR1, 14, ACLKGSB1) -DEFINE_ACLOCK(gsb2, BCLKCTR1, 15, ACLKGSB2) -DEFINE_ACLOCK(gsb3, BCLKCTR1, 16, ACLKGSB3) -DEFINE_ACLOCK(usbh1, BCLKCTR1, 20, ACLKUSBH) - -DEFINE_BCLOCK(dai0, BCLKCTR0, 0, NULL, NULL) -DEFINE_BCLOCK(pic, BCLKCTR0, 1, NULL, NULL) -DEFINE_BCLOCK(tc, BCLKCTR0, 2, NULL, NULL) -DEFINE_BCLOCK(gpio, BCLKCTR0, 3, NULL, NULL) -DEFINE_BCLOCK(usbd, BCLKCTR0, 4, NULL, NULL) -DEFINE_BCLOCK(ecc, BCLKCTR0, 9, NULL, NULL) -DEFINE_BCLOCK(gdma0, BCLKCTR0, 12, NULL, NULL) -DEFINE_BCLOCK(rtc, BCLKCTR0, 15, NULL, NULL) -DEFINE_BCLOCK(nfc, BCLKCTR0, 16, NULL, NULL) -DEFINE_BCLOCK(g2d, BCLKCTR0, 18, NULL, NULL) -DEFINE_BCLOCK(gdma1, BCLKCTR0, 22, NULL, NULL) -DEFINE_BCLOCK(mscl, BCLKCTR0, 25, NULL, NULL) -DEFINE_BCLOCK(bdma, BCLKCTR1, 0, NULL, NULL) -DEFINE_BCLOCK(adma0, BCLKCTR1, 1, NULL, NULL) -DEFINE_BCLOCK(scfg, BCLKCTR1, 3, NULL, NULL) -DEFINE_BCLOCK(cid, BCLKCTR1, 4, NULL, NULL) -DEFINE_BCLOCK(dai1, BCLKCTR1, 7, NULL, NULL) -DEFINE_BCLOCK(adma1, BCLKCTR1, 8, NULL, NULL) -DEFINE_BCLOCK(gps, BCLKCTR1, 12, NULL, NULL) -DEFINE_BCLOCK(gdma2, BCLKCTR1, 17, NULL, NULL) -DEFINE_BCLOCK(gdma3, BCLKCTR1, 18, NULL, NULL) -DEFINE_BCLOCK(ddrc, BCLKCTR1, 19, NULL, NULL) - -#define _REGISTER_CLOCK(d, n, c) \ - { \ - .dev_id = d, \ - .con_id = n, \ - .clk = &c, \ - }, - -static struct clk_lookup lookups[] = { - _REGISTER_CLOCK(NULL, "bus", bus) - _REGISTER_CLOCK(NULL, "cpu", cpu) - _REGISTER_CLOCK(NULL, "tct", tct) - _REGISTER_CLOCK(NULL, "tcx", tcx) - _REGISTER_CLOCK(NULL, "tcz", tcz) - _REGISTER_CLOCK(NULL, "ref", ref) - _REGISTER_CLOCK(NULL, "dai0", dai0) - _REGISTER_CLOCK(NULL, "pic", pic) - _REGISTER_CLOCK(NULL, "tc", tc) - _REGISTER_CLOCK(NULL, "gpio", gpio) - _REGISTER_CLOCK(NULL, "usbd", usbd) - _REGISTER_CLOCK("tcc-uart.0", NULL, uart0) - _REGISTER_CLOCK("tcc-uart.2", NULL, uart2) - _REGISTER_CLOCK("tcc-i2c", NULL, i2c) - _REGISTER_CLOCK("tcc-uart.3", NULL, uart3) - _REGISTER_CLOCK(NULL, "ecc", ecc) - _REGISTER_CLOCK(NULL, "adc", adc) - _REGISTER_CLOCK("tcc-usbh.0", "usb", usbh0) - _REGISTER_CLOCK(NULL, "gdma0", gdma0) - _REGISTER_CLOCK(NULL, "lcd", lcd) - _REGISTER_CLOCK(NULL, "rtc", rtc) - _REGISTER_CLOCK(NULL, "nfc", nfc) - _REGISTER_CLOCK("tcc-mmc.0", NULL, sd0) - _REGISTER_CLOCK(NULL, "g2d", g2d) - _REGISTER_CLOCK(NULL, "gdma1", gdma1) - _REGISTER_CLOCK("tcc-uart.1", NULL, uart1) - _REGISTER_CLOCK("tcc-spi.0", NULL, spi0) - _REGISTER_CLOCK(NULL, "mscl", mscl) - _REGISTER_CLOCK("tcc-spi.1", NULL, spi1) - _REGISTER_CLOCK(NULL, "bdma", bdma) - _REGISTER_CLOCK(NULL, "adma0", adma0) - _REGISTER_CLOCK(NULL, "spdif", spdif) - _REGISTER_CLOCK(NULL, "scfg", scfg) - _REGISTER_CLOCK(NULL, "cid", cid) - _REGISTER_CLOCK("tcc-mmc.1", NULL, sd1) - _REGISTER_CLOCK("tcc-uart.4", NULL, uart4) - _REGISTER_CLOCK(NULL, "dai1", dai1) - _REGISTER_CLOCK(NULL, "adma1", adma1) - _REGISTER_CLOCK(NULL, "c3dec", c3dec) - _REGISTER_CLOCK("tcc-can.0", NULL, can0) - _REGISTER_CLOCK("tcc-can.1", NULL, can1) - _REGISTER_CLOCK(NULL, "gps", gps) - _REGISTER_CLOCK("tcc-gsb.0", NULL, gsb0) - _REGISTER_CLOCK("tcc-gsb.1", NULL, gsb1) - _REGISTER_CLOCK("tcc-gsb.2", NULL, gsb2) - _REGISTER_CLOCK("tcc-gsb.3", NULL, gsb3) - _REGISTER_CLOCK(NULL, "gdma2", gdma2) - _REGISTER_CLOCK(NULL, "gdma3", gdma3) - _REGISTER_CLOCK(NULL, "ddrc", ddrc) - _REGISTER_CLOCK("tcc-usbh.1", "usb", usbh1) -}; - -static struct clk *root_clk_by_index(enum root_clks src) -{ - switch (src) { - case CLK_SRC_PLL0: return &pll0; - case CLK_SRC_PLL1: return &pll1; - case CLK_SRC_PLL2: return &pll2; - case CLK_SRC_PLL0DIV: return &pll0div; - case CLK_SRC_PLL1DIV: return &pll1div; - case CLK_SRC_PLL2DIV: return &pll2div; - case CLK_SRC_XI: return ξ - case CLK_SRC_XTI: return &xti; - case CLK_SRC_XIDIV: return &xidiv; - case CLK_SRC_XTIDIV: return &xtidiv; - default: return NULL; - } -} - -static void find_aclk_parent(struct clk *clk) -{ - unsigned int src; - struct clk *clock; - - if (!clk->aclkreg) - return; - - src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT; - src &= CLK_SRC_MASK; - - clock = root_clk_by_index(src); - if (!clock) - return; - - clk->parent = clock; - clk->set_parent = aclk_set_parent; -} - -void __init tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq) -{ - int i; - - xi_rate = xi_freq; - xti_rate = xti_freq; - - /* fixup parents and add the clock */ - for (i = 0; i < ARRAY_SIZE(lookups); i++) { - find_aclk_parent(lookups[i].clk); - clkdev_add(&lookups[i]); - } - tcc8k_timer_init(&tcz, (void __iomem *)TIMER_BASE, INT_TC32); -} diff --git a/arch/arm/mach-tcc8k/common.h b/arch/arm/mach-tcc8k/common.h deleted file mode 100644 index 705690add395..000000000000 --- a/arch/arm/mach-tcc8k/common.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef MACH_TCC8K_COMMON_H -#define MACH_TCC8K_COMMON_H - -#include <linux/platform_device.h> - -extern struct platform_device tcc_nand_device; - -struct clk; - -extern void tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq); -extern void tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq); -extern void tcc8k_init_irq(void); -extern void tcc8k_map_common_io(void); - -#endif diff --git a/arch/arm/mach-tcc8k/devices.c b/arch/arm/mach-tcc8k/devices.c deleted file mode 100644 index 6722ad7c2836..000000000000 --- a/arch/arm/mach-tcc8k/devices.c +++ /dev/null @@ -1,239 +0,0 @@ -/* - * linux/arch/arm/mach-tcc8k/devices.c - * - * Copyright (C) Telechips, Inc. - * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de> - * - * Licensed under the terms of GPL v2. - * - */ - -#include <linux/dma-mapping.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/module.h> - -#include <asm/mach/map.h> - -#include <mach/tcc8k-regs.h> -#include <mach/irqs.h> - -#include "common.h" - -static u64 tcc8k_dmamask = DMA_BIT_MASK(32); - -#ifdef CONFIG_MTD_NAND_TCC -/* NAND controller */ -static struct resource tcc_nand_resources[] = { - { - .start = (resource_size_t)NFC_BASE, - .end = (resource_size_t)NFC_BASE + 0x7f, - .flags = IORESOURCE_MEM, - }, { - .start = INT_NFC, - .end = INT_NFC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device tcc_nand_device = { - .name = "tcc_nand", - .id = 0, - .num_resources = ARRAY_SIZE(tcc_nand_resources), - .resource = tcc_nand_resources, -}; -#endif - -#ifdef CONFIG_MMC_TCC8K -/* MMC controller */ -static struct resource tcc8k_mmc0_resource[] = { - { - .start = INT_SD0, - .end = INT_SD0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource tcc8k_mmc1_resource[] = { - { - .start = INT_SD1, - .end = INT_SD1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device tcc8k_mmc0_device = { - .name = "tcc-mmc", - .id = 0, - .num_resources = ARRAY_SIZE(tcc8k_mmc0_resource), - .resource = tcc8k_mmc0_resource, - .dev = { - .dma_mask = &tcc8k_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - } -}; - -struct platform_device tcc8k_mmc1_device = { - .name = "tcc-mmc", - .id = 1, - .num_resources = ARRAY_SIZE(tcc8k_mmc1_resource), - .resource = tcc8k_mmc1_resource, - .dev = { - .dma_mask = &tcc8k_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - } -}; - -static inline void tcc8k_init_mmc(void) -{ - u32 reg = __raw_readl(GPIOPS_BASE + GPIOPS_FS1_OFFS); - - reg |= GPIOPS_FS1_SDH0_BITS | GPIOPS_FS1_SDH1_BITS; - __raw_writel(reg, GPIOPS_BASE + GPIOPS_FS1_OFFS); - - platform_device_register(&tcc8k_mmc0_device); - platform_device_register(&tcc8k_mmc1_device); -} -#else -static inline void tcc8k_init_mmc(void) { } -#endif - -#ifdef CONFIG_USB_OHCI_HCD -static int tcc8k_ohci_init(struct device *dev) -{ - u32 reg; - - /* Use GPIO PK19 as VBUS control output */ - reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS0_OFFS); - reg &= ~(1 << 19); - __raw_writel(reg, GPIOPK_BASE + GPIOPK_FS0_OFFS); - reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS1_OFFS); - reg &= ~(1 << 19); - __raw_writel(reg, GPIOPK_BASE + GPIOPK_FS1_OFFS); - - reg = __raw_readl(GPIOPK_BASE + GPIOPK_DOE_OFFS); - reg |= (1 << 19); - __raw_writel(reg, GPIOPK_BASE + GPIOPK_DOE_OFFS); - /* Turn on VBUS */ - reg = __raw_readl(GPIOPK_BASE + GPIOPK_DAT_OFFS); - reg |= (1 << 19); - __raw_writel(reg, GPIOPK_BASE + GPIOPK_DAT_OFFS); - - return 0; -} - -static struct resource tcc8k_ohci0_resources[] = { - [0] = { - .start = (resource_size_t)USBH0_BASE, - .end = (resource_size_t)USBH0_BASE + 0x5c, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = INT_USBH0, - .end = INT_USBH0, - .flags = IORESOURCE_IRQ, - } -}; - -static struct resource tcc8k_ohci1_resources[] = { - [0] = { - .start = (resource_size_t)USBH1_BASE, - .end = (resource_size_t)USBH1_BASE + 0x5c, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = INT_USBH1, - .end = INT_USBH1, - .flags = IORESOURCE_IRQ, - } -}; - -static struct tccohci_platform_data tcc8k_ohci0_platform_data = { - .controller = 0, - .port_mode = PMM_PERPORT_MODE, - .init = tcc8k_ohci_init, -}; - -static struct tccohci_platform_data tcc8k_ohci1_platform_data = { - .controller = 1, - .port_mode = PMM_PERPORT_MODE, - .init = tcc8k_ohci_init, -}; - -static struct platform_device ohci0_device = { - .name = "tcc-ohci", - .id = 0, - .dev = { - .dma_mask = &tcc8k_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &tcc8k_ohci0_platform_data, - }, - .num_resources = ARRAY_SIZE(tcc8k_ohci0_resources), - .resource = tcc8k_ohci0_resources, -}; - -static struct platform_device ohci1_device = { - .name = "tcc-ohci", - .id = 1, - .dev = { - .dma_mask = &tcc8k_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &tcc8k_ohci1_platform_data, - }, - .num_resources = ARRAY_SIZE(tcc8k_ohci1_resources), - .resource = tcc8k_ohci1_resources, -}; - -static void __init tcc8k_init_usbhost(void) -{ - platform_device_register(&ohci0_device); - platform_device_register(&ohci1_device); -} -#else -static void __init tcc8k_init_usbhost(void) { } -#endif - -/* USB device controller*/ -#ifdef CONFIG_USB_GADGET_TCC8K -static struct resource udc_resources[] = { - [0] = { - .start = INT_USBD, - .end = INT_USBD, - .flags = IORESOURCE_IRQ, - }, - [1] = { - .start = INT_UDMA, - .end = INT_UDMA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tcc8k_udc_device = { - .name = "tcc-udc", - .id = 0, - .resource = udc_resources, - .num_resources = ARRAY_SIZE(udc_resources), - .dev = { - .dma_mask = &tcc8k_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static void __init tcc8k_init_usb_gadget(void) -{ - platform_device_register(&tcc8k_udc_device); -} -#else -static void __init tcc8k_init_usb_gadget(void) { } -#endif /* CONFIG_USB_GADGET_TCC83X */ - -static int __init tcc8k_init_devices(void) -{ - tcc8k_init_mmc(); - tcc8k_init_usbhost(); - tcc8k_init_usb_gadget(); - return 0; -} - -arch_initcall(tcc8k_init_devices); diff --git a/arch/arm/mach-tcc8k/io.c b/arch/arm/mach-tcc8k/io.c deleted file mode 100644 index 9b39d7fa658f..000000000000 --- a/arch/arm/mach-tcc8k/io.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * linux/arch/arm/mach-tcc8k/io.c - * - * (C) 2009 Hans J. Koch <hjk@linutronix.de> - * - * derived from TCC83xx io.c - * Copyright (C) Telechips, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/io.h> -#include <linux/kernel.h> - -#include <asm/mach/map.h> - -#include <mach/tcc8k-regs.h> - -/* - * The machine specific code may provide the extra mapping besides the - * default mapping provided here. - */ -static struct map_desc tcc8k_io_desc[] __initdata = { - { - .virtual = (unsigned long)CS1_BASE_VIRT, - .pfn = __phys_to_pfn(CS1_BASE), - .length = CS1_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)AHB_PERI_BASE_VIRT, - .pfn = __phys_to_pfn(AHB_PERI_BASE), - .length = AHB_PERI_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)APB0_PERI_BASE_VIRT, - .pfn = __phys_to_pfn(APB0_PERI_BASE), - .length = APB0_PERI_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)APB1_PERI_BASE_VIRT, - .pfn = __phys_to_pfn(APB1_PERI_BASE), - .length = APB1_PERI_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)EXT_MEM_CTRL_BASE_VIRT, - .pfn = __phys_to_pfn(EXT_MEM_CTRL_BASE), - .length = EXT_MEM_CTRL_SIZE, - .type = MT_DEVICE, - }, -}; - -/* - * Maps common IO regions for tcc8k. - * - */ -void __init tcc8k_map_common_io(void) -{ - iotable_init(tcc8k_io_desc, ARRAY_SIZE(tcc8k_io_desc)); -} diff --git a/arch/arm/mach-tcc8k/irq.c b/arch/arm/mach-tcc8k/irq.c deleted file mode 100644 index 209fa5c65d4c..000000000000 --- a/arch/arm/mach-tcc8k/irq.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * Copyright (C) Telechips, Inc. - * Copyright (C) 2009-2010 Hans J. Koch <hjk@linutronix.de> - * - * Licensed under the terms of the GNU GPL version 2. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/mach/irq.h> - -#include <mach/tcc8k-regs.h> -#include <mach/irqs.h> - -#include "common.h" - -/* Disable IRQ */ -static void tcc8000_mask_ack_irq0(struct irq_data *d) -{ - PIC0_IEN &= ~(1 << d->irq); - PIC0_CREQ |= (1 << d->irq); -} - -static void tcc8000_mask_ack_irq1(struct irq_data *d) -{ - PIC1_IEN &= ~(1 << (d->irq - 32)); - PIC1_CREQ |= (1 << (d->irq - 32)); -} - -static void tcc8000_mask_irq0(struct irq_data *d) -{ - PIC0_IEN &= ~(1 << d->irq); -} - -static void tcc8000_mask_irq1(struct irq_data *d) -{ - PIC1_IEN &= ~(1 << (d->irq - 32)); -} - -static void tcc8000_ack_irq0(struct irq_data *d) -{ - PIC0_CREQ |= (1 << d->irq); -} - -static void tcc8000_ack_irq1(struct irq_data *d) -{ - PIC1_CREQ |= (1 << (d->irq - 32)); -} - -/* Enable IRQ */ -static void tcc8000_unmask_irq0(struct irq_data *d) -{ - PIC0_IEN |= (1 << d->irq); - PIC0_INTOEN |= (1 << d->irq); -} - -static void tcc8000_unmask_irq1(struct irq_data *d) -{ - PIC1_IEN |= (1 << (d->irq - 32)); - PIC1_INTOEN |= (1 << (d->irq - 32)); -} - -static struct irq_chip tcc8000_irq_chip0 = { - .name = "tcc_irq0", - .irq_mask = tcc8000_mask_irq0, - .irq_ack = tcc8000_ack_irq0, - .irq_mask_ack = tcc8000_mask_ack_irq0, - .irq_unmask = tcc8000_unmask_irq0, -}; - -static struct irq_chip tcc8000_irq_chip1 = { - .name = "tcc_irq1", - .irq_mask = tcc8000_mask_irq1, - .irq_ack = tcc8000_ack_irq1, - .irq_mask_ack = tcc8000_mask_ack_irq1, - .irq_unmask = tcc8000_unmask_irq1, -}; - -void __init tcc8k_init_irq(void) -{ - int irqno; - - /* Mask and clear all interrupts */ - PIC0_IEN = 0x00000000; - PIC0_CREQ = 0xffffffff; - PIC1_IEN = 0x00000000; - PIC1_CREQ = 0xffffffff; - - PIC0_MEN0 = 0x00000003; - PIC1_MEN1 = 0x00000003; - PIC1_MEN = 0x00000003; - - /* let all IRQs be level triggered */ - PIC0_TMODE = 0xffffffff; - PIC1_TMODE = 0xffffffff; - /* all IRQs are IRQs (not FIQs) */ - PIC0_IRQSEL = 0xffffffff; - PIC1_IRQSEL = 0xffffffff; - - for (irqno = 0; irqno < NR_IRQS; irqno++) { - if (irqno < 32) - irq_set_chip(irqno, &tcc8000_irq_chip0); - else - irq_set_chip(irqno, &tcc8000_irq_chip1); - irq_set_handler(irqno, handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } -} diff --git a/arch/arm/mach-tcc8k/time.c b/arch/arm/mach-tcc8k/time.c deleted file mode 100644 index a96babe83771..000000000000 --- a/arch/arm/mach-tcc8k/time.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * TCC8000 system timer setup - * - * (C) 2009 Hans J. Koch <hjk@linutronix.de> - * - * Licensed under the terms of the GPL version 2. - * - */ - -#include <linux/clk.h> -#include <linux/clockchips.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/spinlock.h> - -#include <asm/mach/time.h> - -#include <mach/tcc8k-regs.h> -#include <mach/irqs.h> - -#include "common.h" - -static void __iomem *timer_base; - -static int tcc_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long reg = __raw_readl(timer_base + TC32MCNT_OFFS); - - __raw_writel(reg + evt, timer_base + TC32CMP0_OFFS); - return 0; -} - -static void tcc_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - unsigned long tc32irq; - - switch (mode) { - case CLOCK_EVT_MODE_ONESHOT: - tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS); - tc32irq |= TC32IRQ_IRQEN0; - __raw_writel(tc32irq, timer_base + TC32IRQ_OFFS); - break; - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS); - tc32irq &= ~TC32IRQ_IRQEN0; - __raw_writel(tc32irq, timer_base + TC32IRQ_OFFS); - break; - case CLOCK_EVT_MODE_PERIODIC: - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static irqreturn_t tcc8k_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - - /* Acknowledge TC32 interrupt by reading TC32IRQ */ - __raw_readl(timer_base + TC32IRQ_OFFS); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct clock_event_device clockevent_tcc = { - .name = "tcc_timer1", - .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, - .set_mode = tcc_set_mode, - .set_next_event = tcc_set_next_event, - .rating = 200, -}; - -static struct irqaction tcc8k_timer_irq = { - .name = "TC32_timer", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = tcc8k_timer_interrupt, - .dev_id = &clockevent_tcc, -}; - -static int __init tcc_clockevent_init(struct clk *clock) -{ - unsigned int c = clk_get_rate(clock); - - clocksource_mmio_init(timer_base + TC32MCNT_OFFS, "tcc_tc32", c, - 200, 32, clocksource_mmio_readl_up); - - clockevent_tcc.mult = div_sc(c, NSEC_PER_SEC, - clockevent_tcc.shift); - clockevent_tcc.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &clockevent_tcc); - clockevent_tcc.min_delta_ns = - clockevent_delta2ns(0xff, &clockevent_tcc); - - clockevent_tcc.cpumask = cpumask_of(0); - - clockevents_register_device(&clockevent_tcc); - - return 0; -} - -void __init tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq) -{ - u32 reg; - - timer_base = base; - tcc8k_timer_irq.irq = irq; - - /* Enable clocks */ - clk_enable(clock); - - /* Initialize 32-bit timer */ - reg = __raw_readl(timer_base + TC32EN_OFFS); - reg &= ~TC32EN_ENABLE; /* Disable timer */ - __raw_writel(reg, timer_base + TC32EN_OFFS); - /* Free running timer, counting from 0 to 0xffffffff */ - __raw_writel(0, timer_base + TC32EN_OFFS); - __raw_writel(0, timer_base + TC32LDV_OFFS); - reg = __raw_readl(timer_base + TC32IRQ_OFFS); - reg |= TC32IRQ_IRQEN0; /* irq at match with CMP0 */ - __raw_writel(reg, timer_base + TC32IRQ_OFFS); - - __raw_writel(TC32EN_ENABLE, timer_base + TC32EN_OFFS); - - tcc_clockevent_init(clock); - setup_irq(irq, &tcc8k_timer_irq); -} diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 91aff7cb8284..373652d76b90 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -2,11 +2,8 @@ if ARCH_TEGRA comment "NVIDIA Tegra options" -choice - prompt "Select Tegra processor family for target system" - config ARCH_TEGRA_2x_SOC - bool "Tegra 2 family" + bool "Enable support for Tegra20 family" select CPU_V7 select ARM_GIC select ARCH_REQUIRE_GPIOLIB @@ -17,22 +14,36 @@ config ARCH_TEGRA_2x_SOC Support for NVIDIA Tegra AP20 and T20 processors, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller -endchoice +config ARCH_TEGRA_3x_SOC + bool "Enable support for Tegra30 family" + select CPU_V7 + select ARM_GIC + select ARCH_REQUIRE_GPIOLIB + select USB_ARCH_HAS_EHCI if USB_SUPPORT + select USB_ULPI if USB_SUPPORT + select USB_ULPI_VIEWPORT if USB_SUPPORT + select USE_OF + help + Support for NVIDIA Tegra T30 processor family, based on the + ARM CortexA9MP CPU and the ARM PL310 L2 cache controller config TEGRA_PCI bool "PCI Express support" + depends on ARCH_TEGRA_2x_SOC select PCI comment "Tegra board type" config MACH_HARMONY bool "Harmony board" + depends on ARCH_TEGRA_2x_SOC select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC help Support for nVidia Harmony development platform config MACH_KAEN bool "Kaen board" + depends on ARCH_TEGRA_2x_SOC select MACH_SEABOARD select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC help @@ -40,11 +51,13 @@ config MACH_KAEN config MACH_PAZ00 bool "Paz00 board" + depends on ARCH_TEGRA_2x_SOC help Support for the Toshiba AC100/Dynabook AZ netbook config MACH_SEABOARD bool "Seaboard board" + depends on ARCH_TEGRA_2x_SOC select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC help Support for nVidia Seaboard development platform. It will @@ -52,25 +65,29 @@ config MACH_SEABOARD have large similarities with the seaboard design. config MACH_TEGRA_DT - bool "Generic Tegra board (FDT support)" + bool "Generic Tegra20 board (FDT support)" + depends on ARCH_TEGRA_2x_SOC select USE_OF help - Support for generic nVidia Tegra boards using Flattened Device Tree + Support for generic NVIDIA Tegra20 boards using Flattened Device Tree config MACH_TRIMSLICE bool "TrimSlice board" + depends on ARCH_TEGRA_2x_SOC select TEGRA_PCI help Support for CompuLab TrimSlice platform config MACH_WARIO bool "Wario board" + depends on ARCH_TEGRA_2x_SOC select MACH_SEABOARD help Support for the Wario version of Seaboard config MACH_VENTANA bool "Ventana board" + depends on ARCH_TEGRA_2x_SOC select MACH_TEGRA_DT help Support for the nVidia Ventana development platform diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 91a07e187208..e120ff54f663 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -1,3 +1,4 @@ +obj-y += board-pinmux.o obj-y += common.o obj-y += devices.o obj-y += io.o @@ -5,12 +6,13 @@ obj-y += irq.o obj-y += clock.o obj-y += timer.o obj-y += pinmux.o -obj-y += powergate.o obj-y += fuse.o -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += clock.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += powergate.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pinmux-t2-tables.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pinmux-tegra20-tables.o +obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pinmux-tegra30-tables.o +obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o obj-$(CONFIG_SMP) += platsmp.o localtimer.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o @@ -18,20 +20,22 @@ obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o obj-$(CONFIG_TEGRA_PCI) += pcie.o obj-$(CONFIG_USB_SUPPORT) += usb_phy.o -obj-${CONFIG_MACH_HARMONY} += board-harmony.o -obj-${CONFIG_MACH_HARMONY} += board-harmony-pinmux.o -obj-${CONFIG_MACH_HARMONY} += board-harmony-pcie.o -obj-${CONFIG_MACH_HARMONY} += board-harmony-power.o +obj-$(CONFIG_MACH_HARMONY) += board-harmony.o +obj-$(CONFIG_MACH_HARMONY) += board-harmony-pinmux.o +obj-$(CONFIG_MACH_HARMONY) += board-harmony-pcie.o +obj-$(CONFIG_MACH_HARMONY) += board-harmony-power.o -obj-${CONFIG_MACH_PAZ00} += board-paz00.o -obj-${CONFIG_MACH_PAZ00} += board-paz00-pinmux.o +obj-$(CONFIG_MACH_PAZ00) += board-paz00.o +obj-$(CONFIG_MACH_PAZ00) += board-paz00-pinmux.o -obj-${CONFIG_MACH_SEABOARD} += board-seaboard.o -obj-${CONFIG_MACH_SEABOARD} += board-seaboard-pinmux.o +obj-$(CONFIG_MACH_SEABOARD) += board-seaboard.o +obj-$(CONFIG_MACH_SEABOARD) += board-seaboard-pinmux.o -obj-${CONFIG_MACH_TEGRA_DT} += board-dt.o -obj-${CONFIG_MACH_TEGRA_DT} += board-harmony-pinmux.o -obj-${CONFIG_MACH_TEGRA_DT} += board-seaboard-pinmux.o +obj-$(CONFIG_MACH_TEGRA_DT) += board-dt-tegra20.o +obj-$(CONFIG_MACH_TEGRA_DT) += board-harmony-pinmux.o +obj-$(CONFIG_MACH_TEGRA_DT) += board-seaboard-pinmux.o +obj-$(CONFIG_MACH_TEGRA_DT) += board-paz00-pinmux.o +obj-$(CONFIG_MACH_TEGRA_DT) += board-trimslice-pinmux.o -obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice.o -obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice-pinmux.o +obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice.o +obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice-pinmux.o diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index bd12c9fb81e8..9a82094092d7 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -3,5 +3,8 @@ params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000 dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb +dtb-$(CONFIG_MACH_PAZ00) += tegra-paz00.dtb dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb +dtb-$(CONFIG_MACH_TRIMSLICE) += tegra-trimslice.dtb dtb-$(CONFIG_MACH_VENTANA) += tegra-ventana.dtb +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra-cardhu.dtb diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt-tegra20.c index 74743ad3d2d3..7a95e0bc4aba 100644 --- a/arch/arm/mach-tegra/board-dt.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -32,10 +32,12 @@ #include <linux/i2c.h> #include <linux/i2c-tegra.h> +#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/setup.h> +#include <asm/hardware/gic.h> #include <mach/iomap.h> #include <mach/irqs.h> @@ -46,10 +48,14 @@ #include "devices.h" void harmony_pinmux_init(void); +void paz00_pinmux_init(void); void seaboard_pinmux_init(void); +void trimslice_pinmux_init(void); void ventana_pinmux_init(void); struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("nvidia,tegra20-pinmux", TEGRA_APB_MISC_BASE + 0x14, "tegra-pinmux", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-gpio", TEGRA_GPIO_BASE, "tegra-gpio", NULL), OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL), OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL), OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC3_BASE, "sdhci-tegra.2", NULL), @@ -57,16 +63,30 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C_BASE, "tegra-i2c.0", NULL), OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C2_BASE, "tegra-i2c.1", NULL), OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C3_BASE, "tegra-i2c.2", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_DVC_BASE, "tegra-i2c.3", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2c-dvc", TEGRA_DVC_BASE, "tegra-i2c.3", NULL), OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S1_BASE, "tegra-i2s.0", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S1_BASE, "tegra-i2s.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S2_BASE, "tegra-i2s.1", NULL), OF_DEV_AUXDATA("nvidia,tegra20-das", TEGRA_APB_MISC_DAS_BASE, "tegra-das", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB_BASE, "tegra-ehci.0", + &tegra_ehci1_device.dev.platform_data), + OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB2_BASE, "tegra-ehci.1", + &tegra_ehci2_device.dev.platform_data), + OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB3_BASE, "tegra-ehci.2", + &tegra_ehci3_device.dev.platform_data), {} }; static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { /* name parent rate enabled */ { "uartd", "pll_p", 216000000, true }, + { "usbd", "clk_m", 12000000, false }, + { "usb2", "clk_m", 12000000, false }, + { "usb3", "clk_m", 12000000, false }, + { "pll_a", "pll_p_out1", 56448000, true }, + { "pll_a_out0", "pll_a", 11289600, true }, + { "cdev1", NULL, 0, true }, + { "i2s1", "pll_a_out0", 11289600, false}, + { "i2s2", "pll_a_out0", 11289600, false}, { NULL, NULL, 0, 0}, }; @@ -75,39 +95,23 @@ static struct of_device_id tegra_dt_match_table[] __initdata = { {} }; -static struct of_device_id tegra_dt_gic_match[] __initdata = { - { .compatible = "nvidia,tegra20-gic", }, - {} -}; - static struct { char *machine; void (*init)(void); } pinmux_configs[] = { + { "compulab,trimslice", trimslice_pinmux_init }, { "nvidia,harmony", harmony_pinmux_init }, + { "compal,paz00", paz00_pinmux_init }, { "nvidia,seaboard", seaboard_pinmux_init }, { "nvidia,ventana", ventana_pinmux_init }, }; static void __init tegra_dt_init(void) { - struct device_node *node; int i; - node = of_find_matching_node_by_address(NULL, tegra_dt_gic_match, - TEGRA_ARM_INT_DIST_BASE); - if (node) - irq_domain_add_simple(node, INT_GIC_BASE); - tegra_clk_init_from_table(tegra_dt_clk_init_table); - /* - * Finished with the static registrations now; fill in the missing - * devices - */ - of_platform_populate(NULL, tegra_dt_match_table, - tegra20_auxdata_lookup, NULL); - for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) { if (of_machine_is_compatible(pinmux_configs[i].machine)) { pinmux_configs[i].init(); @@ -117,20 +121,31 @@ static void __init tegra_dt_init(void) WARN(i == ARRAY_SIZE(pinmux_configs), "Unknown platform! Pinmuxing not initialized\n"); + + /* + * Finished with the static registrations now; fill in the missing + * devices + */ + of_platform_populate(NULL, tegra_dt_match_table, + tegra20_auxdata_lookup, NULL); } -static const char * tegra_dt_board_compat[] = { +static const char *tegra20_dt_board_compat[] = { + "compulab,trimslice", "nvidia,harmony", + "compal,paz00", "nvidia,seaboard", "nvidia,ventana", NULL }; -DT_MACHINE_START(TEGRA_DT, "nVidia Tegra (Flattened Device Tree)") +DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)") .map_io = tegra_map_common_io, - .init_early = tegra_init_early, - .init_irq = tegra_init_irq, + .init_early = tegra20_init_early, + .init_irq = tegra_dt_init_irq, + .handle_irq = gic_handle_irq, .timer = &tegra_timer, .init_machine = tegra_dt_init, - .dt_compat = tegra_dt_board_compat, + .restart = tegra_assert_system_reset, + .dt_compat = tegra20_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c new file mode 100644 index 000000000000..3c197e2440b7 --- /dev/null +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -0,0 +1,63 @@ +/* + * arch/arm/mach-tegra/board-dt-tegra30.c + * + * NVIDIA Tegra30 device tree board support + * + * Copyright (C) 2011 NVIDIA Corporation + * + * Derived from: + * + * arch/arm/mach-tegra/board-dt-tegra20.c + * + * Copyright (C) 2010 Secret Lab Technologies, Ltd. + * Copyright (C) 2010 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> + +#include <asm/mach/arch.h> +#include <asm/hardware/gic.h> + +#include "board.h" + +static struct of_device_id tegra_dt_match_table[] __initdata = { + { .compatible = "simple-bus", }, + {} +}; + +static void __init tegra30_dt_init(void) +{ + of_platform_populate(NULL, tegra_dt_match_table, + NULL, NULL); +} + +static const char *tegra30_dt_board_compat[] = { + "nvidia,cardhu", + NULL +}; + +DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)") + .map_io = tegra_map_common_io, + .init_early = tegra30_init_early, + .init_irq = tegra_dt_init_irq, + .handle_irq = gic_handle_irq, + .timer = &tegra_timer, + .init_machine = tegra30_dt_init, + .restart = tegra_assert_system_reset, + .dt_compat = tegra30_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c index 6db7d699ef1c..33c4fedab840 100644 --- a/arch/arm/mach-tegra/board-harmony-pcie.c +++ b/arch/arm/mach-tegra/board-harmony-pcie.c @@ -22,7 +22,6 @@ #include <asm/mach-types.h> -#include <mach/pinmux.h> #include "board.h" #include "board-harmony.h" @@ -48,10 +47,6 @@ static int __init harmony_pcie_init(void) regulator_enable(regulator); - tegra_pinmux_set_tristate(TEGRA_PINGROUP_GPV, TEGRA_TRI_NORMAL); - tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXA, TEGRA_TRI_NORMAL); - tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXK, TEGRA_TRI_NORMAL); - err = tegra_pcie_init(true, true); if (err) goto err_pcie; @@ -59,10 +54,6 @@ static int __init harmony_pcie_init(void) return 0; err_pcie: - tegra_pinmux_set_tristate(TEGRA_PINGROUP_GPV, TEGRA_TRI_TRISTATE); - tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXA, TEGRA_TRI_TRISTATE); - tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXK, TEGRA_TRI_TRISTATE); - regulator_disable(regulator); regulator_put(regulator); err_reg: diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c index 7a4a26d5174c..465808c8ac0b 100644 --- a/arch/arm/mach-tegra/board-harmony-pinmux.c +++ b/arch/arm/mach-tegra/board-harmony-pinmux.c @@ -19,10 +19,11 @@ #include <linux/of.h> #include <mach/pinmux.h> +#include <mach/pinmux-tegra20.h> #include "gpio-names.h" #include "board-harmony.h" -#include "devices.h" +#include "board-pinmux.h" static struct tegra_pingroup_config harmony_pinmux[] = { {TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, @@ -143,11 +144,6 @@ static struct tegra_pingroup_config harmony_pinmux[] = { {TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, }; -static struct platform_device *pinmux_devices[] = { - &tegra_gpio_device, - &tegra_pinmux_device, -}; - static struct tegra_gpio_table gpio_table[] = { { .gpio = TEGRA_GPIO_SD2_CD, .enable = true }, { .gpio = TEGRA_GPIO_SD2_WP, .enable = true }, @@ -161,13 +157,14 @@ static struct tegra_gpio_table gpio_table[] = { { .gpio = TEGRA_GPIO_EXT_MIC_EN, .enable = true }, }; +static struct tegra_board_pinmux_conf conf = { + .pgs = harmony_pinmux, + .pg_count = ARRAY_SIZE(harmony_pinmux), + .gpios = gpio_table, + .gpio_count = ARRAY_SIZE(gpio_table), +}; + void harmony_pinmux_init(void) { - if (!of_machine_is_compatible("nvidia,tegra20")) - platform_add_devices(pinmux_devices, - ARRAY_SIZE(pinmux_devices)); - - tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux)); - - tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table)); + tegra_board_pinmux_init(&conf, NULL); } diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c index f0bdc5e3fe52..a0f9634f6727 100644 --- a/arch/arm/mach-tegra/board-harmony.c +++ b/arch/arm/mach-tegra/board-harmony.c @@ -31,6 +31,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include <asm/hardware/gic.h> #include <asm/setup.h> #include <mach/tegra_wm8903_pdata.h> @@ -185,8 +186,10 @@ MACHINE_START(HARMONY, "harmony") .atag_offset = 0x100, .fixup = tegra_harmony_fixup, .map_io = tegra_map_common_io, - .init_early = tegra_init_early, + .init_early = tegra20_init_early, .init_irq = tegra_init_irq, + .handle_irq = gic_handle_irq, .timer = &tegra_timer, .init_machine = tegra_harmony_init, + .restart = tegra_assert_system_reset, MACHINE_END diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c index be30e215f4b7..c775572dcea4 100644 --- a/arch/arm/mach-tegra/board-paz00-pinmux.c +++ b/arch/arm/mach-tegra/board-paz00-pinmux.c @@ -19,10 +19,11 @@ #include <linux/of.h> #include <mach/pinmux.h> +#include <mach/pinmux-tegra20.h> #include "gpio-names.h" #include "board-paz00.h" -#include "devices.h" +#include "board-pinmux.h" static struct tegra_pingroup_config paz00_pinmux[] = { {TEGRA_PINGROUP_ATA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, @@ -30,7 +31,7 @@ static struct tegra_pingroup_config paz00_pinmux[] = { {TEGRA_PINGROUP_ATC, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_ATD, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_ATE, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_CSUS, TEGRA_MUX_PLLC_OUT1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, @@ -143,11 +144,6 @@ static struct tegra_pingroup_config paz00_pinmux[] = { {TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, }; -static struct platform_device *pinmux_devices[] = { - &tegra_gpio_device, - &tegra_pinmux_device, -}; - static struct tegra_gpio_table gpio_table[] = { { .gpio = TEGRA_GPIO_SD1_CD, .enable = true }, { .gpio = TEGRA_GPIO_SD1_WP, .enable = true }, @@ -158,13 +154,14 @@ static struct tegra_gpio_table gpio_table[] = { { .gpio = TEGRA_WIFI_LED, .enable = true }, }; +static struct tegra_board_pinmux_conf conf = { + .pgs = paz00_pinmux, + .pg_count = ARRAY_SIZE(paz00_pinmux), + .gpios = gpio_table, + .gpio_count = ARRAY_SIZE(gpio_table), +}; + void paz00_pinmux_init(void) { - if (!of_machine_is_compatible("nvidia,tegra20")) - platform_add_devices(pinmux_devices, - ARRAY_SIZE(pinmux_devices)); - - tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux)); - - tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table)); + tegra_board_pinmux_init(&conf, NULL); } diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index 55c55ba89f1e..fcf4f377b1dc 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -23,12 +23,15 @@ #include <linux/serial_8250.h> #include <linux/clk.h> #include <linux/dma-mapping.h> +#include <linux/gpio_keys.h> #include <linux/pda_power.h> #include <linux/io.h> +#include <linux/input.h> #include <linux/i2c.h> #include <linux/gpio.h> #include <linux/rfkill-gpio.h> +#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> @@ -114,12 +117,37 @@ static struct platform_device leds_gpio = { }, }; +static struct gpio_keys_button paz00_gpio_keys_buttons[] = { + { + .code = KEY_POWER, + .gpio = TEGRA_GPIO_POWERKEY, + .active_low = 1, + .desc = "Power", + .type = EV_KEY, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data paz00_gpio_keys = { + .buttons = paz00_gpio_keys_buttons, + .nbuttons = ARRAY_SIZE(paz00_gpio_keys_buttons), +}; + +static struct platform_device gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &paz00_gpio_keys, + }, +}; + static struct platform_device *paz00_devices[] __initdata = { &debug_uart, &tegra_sdhci_device4, &tegra_sdhci_device1, &wifi_rfkill_device, &leds_gpio, + &gpio_keys_device, }; static void paz00_i2c_init(void) @@ -188,8 +216,10 @@ MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ") .atag_offset = 0x100, .fixup = tegra_paz00_fixup, .map_io = tegra_map_common_io, - .init_early = tegra_init_early, + .init_early = tegra20_init_early, .init_irq = tegra_init_irq, + .handle_irq = gic_handle_irq, .timer = &tegra_timer, .init_machine = tegra_paz00_init, + .restart = tegra_assert_system_reset, MACHINE_END diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h index 8aff06eb58c3..ffa83f580db6 100644 --- a/arch/arm/mach-tegra/board-paz00.h +++ b/arch/arm/mach-tegra/board-paz00.h @@ -32,6 +32,9 @@ #define TEGRA_WIFI_RST TEGRA_GPIO_PD1 #define TEGRA_WIFI_LED TEGRA_GPIO_PD0 +/* WakeUp */ +#define TEGRA_GPIO_POWERKEY TEGRA_GPIO_PJ7 + void paz00_pinmux_init(void); #endif diff --git a/arch/arm/mach-tegra/board-pinmux.c b/arch/arm/mach-tegra/board-pinmux.c new file mode 100644 index 000000000000..adc3efe979b3 --- /dev/null +++ b/arch/arm/mach-tegra/board-pinmux.c @@ -0,0 +1,104 @@ +/* + * Copyright (c) 2011, NVIDIA CORPORATION. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/notifier.h> +#include <linux/of.h> +#include <linux/string.h> + +#include <mach/gpio-tegra.h> +#include <mach/pinmux.h> + +#include "board-pinmux.h" +#include "devices.h" + +struct tegra_board_pinmux_conf *confs[2]; + +static void tegra_board_pinmux_setup_gpios(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(confs); i++) { + if (!confs[i]) + continue; + + tegra_gpio_config(confs[i]->gpios, confs[i]->gpio_count); + } +} + +static void tegra_board_pinmux_setup_pinmux(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(confs); i++) { + if (!confs[i]) + continue; + + tegra_pinmux_config_table(confs[i]->pgs, confs[i]->pg_count); + + if (confs[i]->drives) + tegra_drive_pinmux_config_table(confs[i]->drives, + confs[i]->drive_count); + } +} + +static int tegra_board_pinmux_bus_notify(struct notifier_block *nb, + unsigned long event, void *vdev) +{ + static bool had_gpio; + static bool had_pinmux; + + struct device *dev = vdev; + const char *devname; + + if (event != BUS_NOTIFY_BOUND_DRIVER) + return NOTIFY_DONE; + + devname = dev_name(dev); + + if (!had_gpio && !strcmp(devname, GPIO_DEV)) { + tegra_board_pinmux_setup_gpios(); + had_gpio = true; + } else if (!had_pinmux && !strcmp(devname, PINMUX_DEV)) { + tegra_board_pinmux_setup_pinmux(); + had_pinmux = true; + } + + if (had_gpio && had_pinmux) + return NOTIFY_STOP_MASK; + else + return NOTIFY_DONE; +} + +static struct notifier_block nb = { + .notifier_call = tegra_board_pinmux_bus_notify, +}; + +static struct platform_device *devices[] = { + &tegra_gpio_device, + &tegra_pinmux_device, +}; + +void tegra_board_pinmux_init(struct tegra_board_pinmux_conf *conf_a, + struct tegra_board_pinmux_conf *conf_b) +{ + confs[0] = conf_a; + confs[1] = conf_b; + + bus_register_notifier(&platform_bus_type, &nb); + + if (!of_machine_is_compatible("nvidia,tegra20")) + platform_add_devices(devices, ARRAY_SIZE(devices)); +} diff --git a/arch/arm/mach-tegra/board-pinmux.h b/arch/arm/mach-tegra/board-pinmux.h new file mode 100644 index 000000000000..4aac73546f54 --- /dev/null +++ b/arch/arm/mach-tegra/board-pinmux.h @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2011, NVIDIA CORPORATION. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __MACH_TEGRA_BOARD_PINMUX_H +#define __MACH_TEGRA_BOARD_PINMUX_H + +#define GPIO_DEV "tegra-gpio" +#define PINMUX_DEV "tegra-pinmux" + +struct tegra_pingroup_config; +struct tegra_gpio_table; + +struct tegra_board_pinmux_conf { + struct tegra_pingroup_config *pgs; + int pg_count; + + struct tegra_drive_pingroup_config *drives; + int drive_count; + + struct tegra_gpio_table *gpios; + int gpio_count; +}; + +void tegra_board_pinmux_init(struct tegra_board_pinmux_conf *conf_a, + struct tegra_board_pinmux_conf *conf_b); + +#endif diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c index b1c2972f62fe..55e7e43a14ad 100644 --- a/arch/arm/mach-tegra/board-seaboard-pinmux.c +++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c @@ -19,11 +19,11 @@ #include <linux/of.h> #include <mach/pinmux.h> -#include <mach/pinmux-t2.h> +#include <mach/pinmux-tegra20.h> #include "gpio-names.h" +#include "board-pinmux.h" #include "board-seaboard.h" -#include "devices.h" #define DEFAULT_DRIVE(_name) \ { \ @@ -37,11 +37,11 @@ .slew_falling = TEGRA_SLEW_SLOWEST, \ } -static __initdata struct tegra_drive_pingroup_config seaboard_drive_pinmux[] = { +static struct tegra_drive_pingroup_config seaboard_drive_pinmux[] = { DEFAULT_DRIVE(SDIO1), }; -static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { +static struct tegra_pingroup_config common_pinmux[] = { {TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_ATB, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_ATC, TEGRA_MUX_NAND, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, @@ -55,7 +55,6 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_DAP4, TEGRA_MUX_DAP4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_DTA, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_DTB, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_DTC, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, @@ -65,7 +64,6 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { {TEGRA_PINGROUP_GMA, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_GMB, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_GMC, TEGRA_MUX_UARTD, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_GMD, TEGRA_MUX_SFLASH, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_GME, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_GPU, TEGRA_MUX_PWM, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_GPU7, TEGRA_MUX_RTCK, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, @@ -108,13 +106,8 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { {TEGRA_PINGROUP_LM0, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_LM1, TEGRA_MUX_CRT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_LPP, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_LPW0, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_LPW1, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_LPW2, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_LSC0, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_LSC1, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_LSCK, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_LSDA, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_LSDI, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_LSPI, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_LVP0, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, @@ -122,25 +115,19 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { {TEGRA_PINGROUP_LVS, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_OWC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_PMC, TEGRA_MUX_PWR_ON, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_PTA, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_RM, TEGRA_MUX_I2C, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SDB, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SDC, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SDD, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SLXA, TEGRA_MUX_PCIE, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_SLXC, TEGRA_MUX_SPDIF, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SLXD, TEGRA_MUX_SPDIF, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_SLXK, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SPDI, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SPDO, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIB, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SPID, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIE, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIF, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIH, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_UAA, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_UAB, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, @@ -160,13 +147,24 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { {TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, }; -static __initdata struct tegra_pingroup_config ventana_pinmux[] = { - {TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, +static struct tegra_pingroup_config seaboard_pinmux[] = { + {TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_GMD, TEGRA_MUX_SFLASH, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LPW0, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LPW2, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LSC1, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LSCK, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LSDA, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_PTA, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SLXC, TEGRA_MUX_SPDIF, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SLXK, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, +}; + +static struct tegra_pingroup_config ventana_pinmux[] = { {TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_DTA, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_DTB, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_DTC, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_DTD, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_GMD, TEGRA_MUX_SFLASH, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_LPW0, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_LPW2, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, @@ -181,65 +179,59 @@ static __initdata struct tegra_pingroup_config ventana_pinmux[] = { {TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, }; -static struct platform_device *pinmux_devices[] = { - &tegra_gpio_device, - &tegra_pinmux_device, -}; - static struct tegra_gpio_table common_gpio_table[] = { { .gpio = TEGRA_GPIO_SD2_CD, .enable = true }, { .gpio = TEGRA_GPIO_SD2_WP, .enable = true }, { .gpio = TEGRA_GPIO_SD2_POWER, .enable = true }, + { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true }, +}; + +static struct tegra_gpio_table seaboard_gpio_table[] = { { .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true }, { .gpio = TEGRA_GPIO_POWERKEY, .enable = true }, { .gpio = TEGRA_GPIO_HP_DET, .enable = true }, { .gpio = TEGRA_GPIO_ISL29018_IRQ, .enable = true }, - { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true }, { .gpio = TEGRA_GPIO_USB1, .enable = true }, }; -static void __init update_pinmux(struct tegra_pingroup_config *newtbl, int size) -{ - int i, j; - struct tegra_pingroup_config *new_pingroup, *base_pingroup; - - /* Update base seaboard pinmux table with secondary board - * specific pinmux table table. - */ - for (i = 0; i < size; i++) { - new_pingroup = &newtbl[i]; - for (j = 0; j < ARRAY_SIZE(seaboard_pinmux); j++) { - base_pingroup = &seaboard_pinmux[j]; - if (new_pingroup->pingroup == base_pingroup->pingroup) { - *base_pingroup = *new_pingroup; - break; - } - } - } -} - -void __init seaboard_common_pinmux_init(void) -{ - if (!of_machine_is_compatible("nvidia,tegra20")) - platform_add_devices(pinmux_devices, - ARRAY_SIZE(pinmux_devices)); +static struct tegra_gpio_table ventana_gpio_table[] = { + /* hp_det */ + { .gpio = TEGRA_GPIO_PW2, .enable = true }, + /* int_mic_en */ + { .gpio = TEGRA_GPIO_PX0, .enable = true }, + /* ext_mic_en */ + { .gpio = TEGRA_GPIO_PX1, .enable = true }, +}; - tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux)); +static struct tegra_board_pinmux_conf common_conf = { + .pgs = common_pinmux, + .pg_count = ARRAY_SIZE(common_pinmux), + .gpios = common_gpio_table, + .gpio_count = ARRAY_SIZE(common_gpio_table), +}; - tegra_drive_pinmux_config_table(seaboard_drive_pinmux, - ARRAY_SIZE(seaboard_drive_pinmux)); +static struct tegra_board_pinmux_conf seaboard_conf = { + .pgs = seaboard_pinmux, + .pg_count = ARRAY_SIZE(seaboard_pinmux), + .drives = seaboard_drive_pinmux, + .drive_count = ARRAY_SIZE(seaboard_drive_pinmux), + .gpios = seaboard_gpio_table, + .gpio_count = ARRAY_SIZE(seaboard_gpio_table), +}; - tegra_gpio_config(common_gpio_table, ARRAY_SIZE(common_gpio_table)); -} +static struct tegra_board_pinmux_conf ventana_conf = { + .pgs = ventana_pinmux, + .pg_count = ARRAY_SIZE(ventana_pinmux), + .gpios = ventana_gpio_table, + .gpio_count = ARRAY_SIZE(ventana_gpio_table), +}; -void __init seaboard_pinmux_init(void) +void seaboard_pinmux_init(void) { - seaboard_common_pinmux_init(); + tegra_board_pinmux_init(&common_conf, &seaboard_conf); } -void __init ventana_pinmux_init(void) +void ventana_pinmux_init(void) { - update_pinmux(ventana_pinmux, ARRAY_SIZE(ventana_pinmux)); - seaboard_common_pinmux_init(); + tegra_board_pinmux_init(&common_conf, &ventana_conf); } - diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c index bf13ea355efc..cfc74d46a09e 100644 --- a/arch/arm/mach-tegra/board-seaboard.c +++ b/arch/arm/mach-tegra/board-seaboard.c @@ -34,6 +34,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/hardware/gic.h> #include "board.h" #include "board-seaboard.h" @@ -282,26 +283,32 @@ static void __init tegra_wario_init(void) MACHINE_START(SEABOARD, "seaboard") .atag_offset = 0x100, .map_io = tegra_map_common_io, - .init_early = tegra_init_early, + .init_early = tegra20_init_early, .init_irq = tegra_init_irq, + .handle_irq = gic_handle_irq, .timer = &tegra_timer, .init_machine = tegra_seaboard_init, + .restart = tegra_assert_system_reset, MACHINE_END MACHINE_START(KAEN, "kaen") .atag_offset = 0x100, .map_io = tegra_map_common_io, - .init_early = tegra_init_early, + .init_early = tegra20_init_early, .init_irq = tegra_init_irq, + .handle_irq = gic_handle_irq, .timer = &tegra_timer, .init_machine = tegra_kaen_init, + .restart = tegra_assert_system_reset, MACHINE_END MACHINE_START(WARIO, "wario") .atag_offset = 0x100, .map_io = tegra_map_common_io, - .init_early = tegra_init_early, + .init_early = tegra20_init_early, .init_irq = tegra_init_irq, + .handle_irq = gic_handle_irq, .timer = &tegra_timer, .init_machine = tegra_wario_init, + .restart = tegra_assert_system_reset, MACHINE_END diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c index 7ab719d46da0..a21a2be57cb6 100644 --- a/arch/arm/mach-tegra/board-trimslice-pinmux.c +++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c @@ -19,12 +19,13 @@ #include <linux/of.h> #include <mach/pinmux.h> +#include <mach/pinmux-tegra20.h> #include "gpio-names.h" +#include "board-pinmux.h" #include "board-trimslice.h" -#include "devices.h" -static __initdata struct tegra_pingroup_config trimslice_pinmux[] = { +static struct tegra_pingroup_config trimslice_pinmux[] = { {TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_ATB, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_ATC, TEGRA_MUX_NAND, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, @@ -105,7 +106,7 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = { {TEGRA_PINGROUP_LVS, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_OWC, TEGRA_MUX_RSVD2, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_PMC, TEGRA_MUX_PWR_ON, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_PTA, TEGRA_MUX_RSVD3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_PTA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_RM, TEGRA_MUX_I2C, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SDB, TEGRA_MUX_PWM, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SDC, TEGRA_MUX_PWM, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, @@ -143,11 +144,6 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = { {TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, }; -static struct platform_device *pinmux_devices[] = { - &tegra_gpio_device, - &tegra_pinmux_device, -}; - static struct tegra_gpio_table gpio_table[] = { { .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true }, /* mmc4 cd */ { .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true }, /* mmc4 wp */ @@ -156,11 +152,14 @@ static struct tegra_gpio_table gpio_table[] = { { .gpio = TRIMSLICE_GPIO_USB2_RST, .enable = true }, /* USB2 PHY rst */ }; -void __init trimslice_pinmux_init(void) +static struct tegra_board_pinmux_conf conf = { + .pgs = trimslice_pinmux, + .pg_count = ARRAY_SIZE(trimslice_pinmux), + .gpios = gpio_table, + .gpio_count = ARRAY_SIZE(gpio_table), +}; + +void trimslice_pinmux_init(void) { - if (!of_machine_is_compatible("nvidia,tegra20")) - platform_add_devices(pinmux_devices, - ARRAY_SIZE(pinmux_devices)); - tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux)); - tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table)); + tegra_board_pinmux_init(&conf, NULL); } diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c index 1a6617b7806f..cd52820a3e37 100644 --- a/arch/arm/mach-tegra/board-trimslice.c +++ b/arch/arm/mach-tegra/board-trimslice.c @@ -26,6 +26,7 @@ #include <linux/i2c.h> #include <linux/gpio.h> +#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/setup.h> @@ -174,8 +175,10 @@ MACHINE_START(TRIMSLICE, "trimslice") .atag_offset = 0x100, .fixup = tegra_trimslice_fixup, .map_io = tegra_map_common_io, - .init_early = tegra_init_early, + .init_early = tegra20_init_early, .init_irq = tegra_init_irq, + .handle_irq = gic_handle_irq, .timer = &tegra_timer, .init_machine = tegra_trimslice_init, + .restart = tegra_assert_system_reset, MACHINE_END diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index 1d14df7eb7de..75d1543d77c0 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -25,10 +25,11 @@ void tegra_assert_system_reset(char mode, const char *cmd); -void __init tegra_init_early(void); +void __init tegra20_init_early(void); +void __init tegra30_init_early(void); void __init tegra_map_common_io(void); void __init tegra_init_irq(void); -void __init tegra_init_clock(void); +void __init tegra_dt_init_irq(void); int __init tegra_pcie_init(bool init_port0, bool init_port1); extern struct sys_timer tegra_timer; diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index f8d41ffc0ca9..8337068a4abe 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -387,35 +387,18 @@ EXPORT_SYMBOL(tegra_clk_init_from_table); void tegra_periph_reset_deassert(struct clk *c) { - tegra2_periph_reset_deassert(c); + BUG_ON(!c->ops->reset); + c->ops->reset(c, false); } EXPORT_SYMBOL(tegra_periph_reset_deassert); void tegra_periph_reset_assert(struct clk *c) { - tegra2_periph_reset_assert(c); + BUG_ON(!c->ops->reset); + c->ops->reset(c, true); } EXPORT_SYMBOL(tegra_periph_reset_assert); -void __init tegra_init_clock(void) -{ - tegra2_init_clocks(); -} - -/* - * The SDMMC controllers have extra bits in the clock source register that - * adjust the delay between the clock and data to compenstate for delays - * on the PCB. - */ -void tegra_sdmmc_tap_delay(struct clk *c, int delay) -{ - unsigned long flags; - - spin_lock_irqsave(&c->spinlock, flags); - tegra2_sdmmc_tap_delay(c, delay); - spin_unlock_irqrestore(&c->spinlock, flags); -} - #ifdef CONFIG_DEBUG_FS static int __clk_lock_all_spinlocks(void) diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h index 688316abc64e..5c44106616c5 100644 --- a/arch/arm/mach-tegra/clock.h +++ b/arch/arm/mach-tegra/clock.h @@ -146,15 +146,11 @@ struct tegra_clk_init_table { }; void tegra2_init_clocks(void); -void tegra2_periph_reset_deassert(struct clk *c); -void tegra2_periph_reset_assert(struct clk *c); void clk_init(struct clk *clk); struct clk *tegra_get_clock_by_name(const char *name); -unsigned long clk_measure_input_freq(void); int clk_reparent(struct clk *c, struct clk *parent); void tegra_clk_init_from_table(struct tegra_clk_init_table *table); unsigned long clk_get_rate_locked(struct clk *c); int clk_set_rate_locked(struct clk *c, unsigned long rate); -void tegra2_sdmmc_tap_delay(struct clk *c, int delay); #endif diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 690b888be506..a2eb90169aed 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-tegra/board-harmony.c + * arch/arm/mach-tegra/common.c * * Copyright (C) 2010 Google, Inc. * @@ -21,8 +21,10 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/delay.h> +#include <linux/of_irq.h> #include <asm/hardware/cache-l2x0.h> +#include <asm/hardware/gic.h> #include <mach/iomap.h> #include <mach/system.h> @@ -31,20 +33,31 @@ #include "clock.h" #include "fuse.h" -void (*arch_reset)(char mode, const char *cmd) = tegra_assert_system_reset; +#ifdef CONFIG_OF +static const struct of_device_id tegra_dt_irq_match[] __initconst = { + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init }, + { } +}; + +void __init tegra_dt_init_irq(void) +{ + tegra_init_irq(); + of_irq_init(tegra_dt_irq_match); +} +#endif void tegra_assert_system_reset(char mode, const char *cmd) { - void __iomem *reset = IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x04); + void __iomem *reset = IO_ADDRESS(TEGRA_PMC_BASE + 0); u32 reg; - /* use *_related to avoid spinlock since caches are off */ reg = readl_relaxed(reset); - reg |= 0x04; + reg |= 0x10; writel_relaxed(reg, reset); } -static __initdata struct tegra_clk_init_table common_clk_init_table[] = { +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = { /* name parent rate enabled */ { "clk_m", NULL, 0, true }, { "pll_p", "clk_m", 216000000, true }, @@ -60,24 +73,38 @@ static __initdata struct tegra_clk_init_table common_clk_init_table[] = { { "cpu", NULL, 0, true }, { NULL, NULL, 0, 0}, }; +#endif -static void __init tegra_init_cache(void) +static void __init tegra_init_cache(u32 tag_latency, u32 data_latency) { #ifdef CONFIG_CACHE_L2X0 void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000; + u32 aux_ctrl, cache_type; - writel_relaxed(0x331, p + L2X0_TAG_LATENCY_CTRL); - writel_relaxed(0x441, p + L2X0_DATA_LATENCY_CTRL); + writel_relaxed(tag_latency, p + L2X0_TAG_LATENCY_CTRL); + writel_relaxed(data_latency, p + L2X0_DATA_LATENCY_CTRL); - l2x0_init(p, 0x6C080001, 0x8200c3fe); + cache_type = readl(p + L2X0_CACHE_TYPE); + aux_ctrl = (cache_type & 0x700) << (17-8); + aux_ctrl |= 0x6C000001; + + l2x0_init(p, aux_ctrl, 0x8200c3fe); #endif } -void __init tegra_init_early(void) +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +void __init tegra20_init_early(void) { tegra_init_fuse(); - tegra_init_clock(); - tegra_clk_init_from_table(common_clk_init_table); - tegra_init_cache(); + tegra2_init_clocks(); + tegra_clk_init_from_table(tegra20_clk_init_table); + tegra_init_cache(0x331, 0x441); } +#endif +#ifdef CONFIG_ARCH_TEGRA_3x_SOC +void __init tegra30_init_early(void) +{ + tegra_init_cache(0x441, 0x551); +} +#endif diff --git a/arch/arm/mach-tegra/include/mach/clk.h b/arch/arm/mach-tegra/include/mach/clk.h index c8baf8f80d23..fc3ecb66de08 100644 --- a/arch/arm/mach-tegra/include/mach/clk.h +++ b/arch/arm/mach-tegra/include/mach/clk.h @@ -26,6 +26,6 @@ void tegra_periph_reset_deassert(struct clk *c); void tegra_periph_reset_assert(struct clk *c); unsigned long clk_get_rate_all_locked(struct clk *c); -void tegra_sdmmc_tap_delay(struct clk *c, int delay); +void tegra2_sdmmc_tap_delay(struct clk *c, int delay); #endif diff --git a/arch/arm/mach-tegra/include/mach/entry-macro.S b/arch/arm/mach-tegra/include/mach/entry-macro.S index dd165c53889d..e577cfe27e72 100644 --- a/arch/arm/mach-tegra/include/mach/entry-macro.S +++ b/arch/arm/mach-tegra/include/mach/entry-macro.S @@ -12,45 +12,9 @@ * GNU General Public License for more details. * */ -#include <mach/iomap.h> -#include <mach/io.h> -#if defined(CONFIG_ARM_GIC) -#define HAVE_GET_IRQNR_PREAMBLE -#include <asm/hardware/entry-macro-gic.S> - - /* Uses the GIC interrupt controller built into the cpu */ -#define ICTRL_BASE (IO_CPU_VIRT + 0x100) - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - movw \base, #(ICTRL_BASE & 0x0000ffff) - movt \base, #((ICTRL_BASE & 0xffff0000) >> 16) - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm -#else - /* legacy interrupt controller for AP16 */ .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - @ enable imprecise aborts - cpsie a - @ EVP base at 0xf010f000 - mov \base, #0xf0000000 - orr \base, #0x00100000 - orr \base, #0x0000f000 - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, [\base, #0x20] @ EVT_IRQ_STS - cmp \irqnr, #0x80 - .endm -#endif diff --git a/arch/arm/mach-tegra/include/mach/io.h b/arch/arm/mach-tegra/include/mach/io.h index 35a011fbc42d..f15defffb5d2 100644 --- a/arch/arm/mach-tegra/include/mach/io.h +++ b/arch/arm/mach-tegra/include/mach/io.h @@ -71,12 +71,6 @@ #ifndef __ASSEMBLER__ -#define __arch_ioremap tegra_ioremap -#define __arch_iounmap tegra_iounmap - -void __iomem *tegra_ioremap(unsigned long phys, size_t size, unsigned int type); -void tegra_iounmap(volatile void __iomem *addr); - #define IO_ADDRESS(n) (IO_TO_VIRT(n)) #ifdef CONFIG_TEGRA_PCI diff --git a/arch/arm/mach-tegra/include/mach/irqs.h b/arch/arm/mach-tegra/include/mach/irqs.h index 73265af4dda3..a2146cd6867d 100644 --- a/arch/arm/mach-tegra/include/mach/irqs.h +++ b/arch/arm/mach-tegra/include/mach/irqs.h @@ -25,7 +25,6 @@ #define IRQ_LOCALTIMER 29 -#ifdef CONFIG_ARCH_TEGRA_2x_SOC /* Primary Interrupt Controller */ #define INT_PRI_BASE (INT_GIC_BASE + 32) #define INT_TMR1 (INT_PRI_BASE + 0) @@ -178,6 +177,5 @@ #define NR_BOARD_IRQS 32 #define NR_IRQS (INT_BOARD_BASE + NR_BOARD_IRQS) -#endif #endif diff --git a/arch/arm/mach-tegra/include/mach/kbc.h b/arch/arm/mach-tegra/include/mach/kbc.h index 4f3572a1c684..20bb0545f992 100644 --- a/arch/arm/mach-tegra/include/mach/kbc.h +++ b/arch/arm/mach-tegra/include/mach/kbc.h @@ -53,6 +53,7 @@ struct tegra_kbc_platform_data { struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO]; const struct matrix_keymap_data *keymap_data; + u32 wakeup_key; bool wakeup; bool use_fn_map; bool use_ghost_filter; diff --git a/arch/arm/mach-tegra/include/mach/pinmux-t2.h b/arch/arm/mach-tegra/include/mach/pinmux-tegra20.h index 4c2626347263..6a40c1dbab17 100644 --- a/arch/arm/mach-tegra/include/mach/pinmux-t2.h +++ b/arch/arm/mach-tegra/include/mach/pinmux-tegra20.h @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-tegra/include/mach/pinmux-t2.h + * linux/arch/arm/mach-tegra/include/mach/pinmux-tegra20.h * * Copyright (C) 2010 Google, Inc. * @@ -14,8 +14,8 @@ * */ -#ifndef __MACH_TEGRA_PINMUX_T2_H -#define __MACH_TEGRA_PINMUX_T2_H +#ifndef __MACH_TEGRA_PINMUX_TEGRA20_H +#define __MACH_TEGRA_PINMUX_TEGRA20_H enum tegra_pingroup { TEGRA_PINGROUP_ATA = 0, diff --git a/arch/arm/mach-tegra/include/mach/pinmux-tegra30.h b/arch/arm/mach-tegra/include/mach/pinmux-tegra30.h new file mode 100644 index 000000000000..c1aee3eb2df1 --- /dev/null +++ b/arch/arm/mach-tegra/include/mach/pinmux-tegra30.h @@ -0,0 +1,320 @@ +/* + * linux/arch/arm/mach-tegra/include/mach/pinmux-tegra30.h + * + * Copyright (C) 2010 Google, Inc. + * Copyright (C) 2010,2011 Nvidia, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __MACH_TEGRA_PINMUX_TEGRA30_H +#define __MACH_TEGRA_PINMUX_TEGRA30_H + +enum tegra_pingroup { + TEGRA_PINGROUP_ULPI_DATA0 = 0, + TEGRA_PINGROUP_ULPI_DATA1, + TEGRA_PINGROUP_ULPI_DATA2, + TEGRA_PINGROUP_ULPI_DATA3, + TEGRA_PINGROUP_ULPI_DATA4, + TEGRA_PINGROUP_ULPI_DATA5, + TEGRA_PINGROUP_ULPI_DATA6, + TEGRA_PINGROUP_ULPI_DATA7, + TEGRA_PINGROUP_ULPI_CLK, + TEGRA_PINGROUP_ULPI_DIR, + TEGRA_PINGROUP_ULPI_NXT, + TEGRA_PINGROUP_ULPI_STP, + TEGRA_PINGROUP_DAP3_FS, + TEGRA_PINGROUP_DAP3_DIN, + TEGRA_PINGROUP_DAP3_DOUT, + TEGRA_PINGROUP_DAP3_SCLK, + TEGRA_PINGROUP_GPIO_PV0, + TEGRA_PINGROUP_GPIO_PV1, + TEGRA_PINGROUP_SDMMC1_CLK, + TEGRA_PINGROUP_SDMMC1_CMD, + TEGRA_PINGROUP_SDMMC1_DAT3, + TEGRA_PINGROUP_SDMMC1_DAT2, + TEGRA_PINGROUP_SDMMC1_DAT1, + TEGRA_PINGROUP_SDMMC1_DAT0, + TEGRA_PINGROUP_GPIO_PV2, + TEGRA_PINGROUP_GPIO_PV3, + TEGRA_PINGROUP_CLK2_OUT, + TEGRA_PINGROUP_CLK2_REQ, + TEGRA_PINGROUP_LCD_PWR1, + TEGRA_PINGROUP_LCD_PWR2, + TEGRA_PINGROUP_LCD_SDIN, + TEGRA_PINGROUP_LCD_SDOUT, + TEGRA_PINGROUP_LCD_WR_N, + TEGRA_PINGROUP_LCD_CS0_N, + TEGRA_PINGROUP_LCD_DC0, + TEGRA_PINGROUP_LCD_SCK, + TEGRA_PINGROUP_LCD_PWR0, + TEGRA_PINGROUP_LCD_PCLK, + TEGRA_PINGROUP_LCD_DE, + TEGRA_PINGROUP_LCD_HSYNC, + TEGRA_PINGROUP_LCD_VSYNC, + TEGRA_PINGROUP_LCD_D0, + TEGRA_PINGROUP_LCD_D1, + TEGRA_PINGROUP_LCD_D2, + TEGRA_PINGROUP_LCD_D3, + TEGRA_PINGROUP_LCD_D4, + TEGRA_PINGROUP_LCD_D5, + TEGRA_PINGROUP_LCD_D6, + TEGRA_PINGROUP_LCD_D7, + TEGRA_PINGROUP_LCD_D8, + TEGRA_PINGROUP_LCD_D9, + TEGRA_PINGROUP_LCD_D10, + TEGRA_PINGROUP_LCD_D11, + TEGRA_PINGROUP_LCD_D12, + TEGRA_PINGROUP_LCD_D13, + TEGRA_PINGROUP_LCD_D14, + TEGRA_PINGROUP_LCD_D15, + TEGRA_PINGROUP_LCD_D16, + TEGRA_PINGROUP_LCD_D17, + TEGRA_PINGROUP_LCD_D18, + TEGRA_PINGROUP_LCD_D19, + TEGRA_PINGROUP_LCD_D20, + TEGRA_PINGROUP_LCD_D21, + TEGRA_PINGROUP_LCD_D22, + TEGRA_PINGROUP_LCD_D23, + TEGRA_PINGROUP_LCD_CS1_N, + TEGRA_PINGROUP_LCD_M1, + TEGRA_PINGROUP_LCD_DC1, + TEGRA_PINGROUP_HDMI_INT, + TEGRA_PINGROUP_DDC_SCL, + TEGRA_PINGROUP_DDC_SDA, + TEGRA_PINGROUP_CRT_HSYNC, + TEGRA_PINGROUP_CRT_VSYNC, + TEGRA_PINGROUP_VI_D0, + TEGRA_PINGROUP_VI_D1, + TEGRA_PINGROUP_VI_D2, + TEGRA_PINGROUP_VI_D3, + TEGRA_PINGROUP_VI_D4, + TEGRA_PINGROUP_VI_D5, + TEGRA_PINGROUP_VI_D6, + TEGRA_PINGROUP_VI_D7, + TEGRA_PINGROUP_VI_D8, + TEGRA_PINGROUP_VI_D9, + TEGRA_PINGROUP_VI_D10, + TEGRA_PINGROUP_VI_D11, + TEGRA_PINGROUP_VI_PCLK, + TEGRA_PINGROUP_VI_MCLK, + TEGRA_PINGROUP_VI_VSYNC, + TEGRA_PINGROUP_VI_HSYNC, + TEGRA_PINGROUP_UART2_RXD, + TEGRA_PINGROUP_UART2_TXD, + TEGRA_PINGROUP_UART2_RTS_N, + TEGRA_PINGROUP_UART2_CTS_N, + TEGRA_PINGROUP_UART3_TXD, + TEGRA_PINGROUP_UART3_RXD, + TEGRA_PINGROUP_UART3_CTS_N, + TEGRA_PINGROUP_UART3_RTS_N, + TEGRA_PINGROUP_GPIO_PU0, + TEGRA_PINGROUP_GPIO_PU1, + TEGRA_PINGROUP_GPIO_PU2, + TEGRA_PINGROUP_GPIO_PU3, + TEGRA_PINGROUP_GPIO_PU4, + TEGRA_PINGROUP_GPIO_PU5, + TEGRA_PINGROUP_GPIO_PU6, + TEGRA_PINGROUP_GEN1_I2C_SDA, + TEGRA_PINGROUP_GEN1_I2C_SCL, + TEGRA_PINGROUP_DAP4_FS, + TEGRA_PINGROUP_DAP4_DIN, + TEGRA_PINGROUP_DAP4_DOUT, + TEGRA_PINGROUP_DAP4_SCLK, + TEGRA_PINGROUP_CLK3_OUT, + TEGRA_PINGROUP_CLK3_REQ, + TEGRA_PINGROUP_GMI_WP_N, + TEGRA_PINGROUP_GMI_IORDY, + TEGRA_PINGROUP_GMI_WAIT, + TEGRA_PINGROUP_GMI_ADV_N, + TEGRA_PINGROUP_GMI_CLK, + TEGRA_PINGROUP_GMI_CS0_N, + TEGRA_PINGROUP_GMI_CS1_N, + TEGRA_PINGROUP_GMI_CS2_N, + TEGRA_PINGROUP_GMI_CS3_N, + TEGRA_PINGROUP_GMI_CS4_N, + TEGRA_PINGROUP_GMI_CS6_N, + TEGRA_PINGROUP_GMI_CS7_N, + TEGRA_PINGROUP_GMI_AD0, + TEGRA_PINGROUP_GMI_AD1, + TEGRA_PINGROUP_GMI_AD2, + TEGRA_PINGROUP_GMI_AD3, + TEGRA_PINGROUP_GMI_AD4, + TEGRA_PINGROUP_GMI_AD5, + TEGRA_PINGROUP_GMI_AD6, + TEGRA_PINGROUP_GMI_AD7, + TEGRA_PINGROUP_GMI_AD8, + TEGRA_PINGROUP_GMI_AD9, + TEGRA_PINGROUP_GMI_AD10, + TEGRA_PINGROUP_GMI_AD11, + TEGRA_PINGROUP_GMI_AD12, + TEGRA_PINGROUP_GMI_AD13, + TEGRA_PINGROUP_GMI_AD14, + TEGRA_PINGROUP_GMI_AD15, + TEGRA_PINGROUP_GMI_A16, + TEGRA_PINGROUP_GMI_A17, + TEGRA_PINGROUP_GMI_A18, + TEGRA_PINGROUP_GMI_A19, + TEGRA_PINGROUP_GMI_WR_N, + TEGRA_PINGROUP_GMI_OE_N, + TEGRA_PINGROUP_GMI_DQS, + TEGRA_PINGROUP_GMI_RST_N, + TEGRA_PINGROUP_GEN2_I2C_SCL, + TEGRA_PINGROUP_GEN2_I2C_SDA, + TEGRA_PINGROUP_SDMMC4_CLK, + TEGRA_PINGROUP_SDMMC4_CMD, + TEGRA_PINGROUP_SDMMC4_DAT0, + TEGRA_PINGROUP_SDMMC4_DAT1, + TEGRA_PINGROUP_SDMMC4_DAT2, + TEGRA_PINGROUP_SDMMC4_DAT3, + TEGRA_PINGROUP_SDMMC4_DAT4, + TEGRA_PINGROUP_SDMMC4_DAT5, + TEGRA_PINGROUP_SDMMC4_DAT6, + TEGRA_PINGROUP_SDMMC4_DAT7, + TEGRA_PINGROUP_SDMMC4_RST_N, + TEGRA_PINGROUP_CAM_MCLK, + TEGRA_PINGROUP_GPIO_PCC1, + TEGRA_PINGROUP_GPIO_PBB0, + TEGRA_PINGROUP_CAM_I2C_SCL, + TEGRA_PINGROUP_CAM_I2C_SDA, + TEGRA_PINGROUP_GPIO_PBB3, + TEGRA_PINGROUP_GPIO_PBB4, + TEGRA_PINGROUP_GPIO_PBB5, + TEGRA_PINGROUP_GPIO_PBB6, + TEGRA_PINGROUP_GPIO_PBB7, + TEGRA_PINGROUP_GPIO_PCC2, + TEGRA_PINGROUP_JTAG_RTCK, + TEGRA_PINGROUP_PWR_I2C_SCL, + TEGRA_PINGROUP_PWR_I2C_SDA, + TEGRA_PINGROUP_KB_ROW0, + TEGRA_PINGROUP_KB_ROW1, + TEGRA_PINGROUP_KB_ROW2, + TEGRA_PINGROUP_KB_ROW3, + TEGRA_PINGROUP_KB_ROW4, + TEGRA_PINGROUP_KB_ROW5, + TEGRA_PINGROUP_KB_ROW6, + TEGRA_PINGROUP_KB_ROW7, + TEGRA_PINGROUP_KB_ROW8, + TEGRA_PINGROUP_KB_ROW9, + TEGRA_PINGROUP_KB_ROW10, + TEGRA_PINGROUP_KB_ROW11, + TEGRA_PINGROUP_KB_ROW12, + TEGRA_PINGROUP_KB_ROW13, + TEGRA_PINGROUP_KB_ROW14, + TEGRA_PINGROUP_KB_ROW15, + TEGRA_PINGROUP_KB_COL0, + TEGRA_PINGROUP_KB_COL1, + TEGRA_PINGROUP_KB_COL2, + TEGRA_PINGROUP_KB_COL3, + TEGRA_PINGROUP_KB_COL4, + TEGRA_PINGROUP_KB_COL5, + TEGRA_PINGROUP_KB_COL6, + TEGRA_PINGROUP_KB_COL7, + TEGRA_PINGROUP_CLK_32K_OUT, + TEGRA_PINGROUP_SYS_CLK_REQ, + TEGRA_PINGROUP_CORE_PWR_REQ, + TEGRA_PINGROUP_CPU_PWR_REQ, + TEGRA_PINGROUP_PWR_INT_N, + TEGRA_PINGROUP_CLK_32K_IN, + TEGRA_PINGROUP_OWR, + TEGRA_PINGROUP_DAP1_FS, + TEGRA_PINGROUP_DAP1_DIN, + TEGRA_PINGROUP_DAP1_DOUT, + TEGRA_PINGROUP_DAP1_SCLK, + TEGRA_PINGROUP_CLK1_REQ, + TEGRA_PINGROUP_CLK1_OUT, + TEGRA_PINGROUP_SPDIF_IN, + TEGRA_PINGROUP_SPDIF_OUT, + TEGRA_PINGROUP_DAP2_FS, + TEGRA_PINGROUP_DAP2_DIN, + TEGRA_PINGROUP_DAP2_DOUT, + TEGRA_PINGROUP_DAP2_SCLK, + TEGRA_PINGROUP_SPI2_MOSI, + TEGRA_PINGROUP_SPI2_MISO, + TEGRA_PINGROUP_SPI2_CS0_N, + TEGRA_PINGROUP_SPI2_SCK, + TEGRA_PINGROUP_SPI1_MOSI, + TEGRA_PINGROUP_SPI1_SCK, + TEGRA_PINGROUP_SPI1_CS0_N, + TEGRA_PINGROUP_SPI1_MISO, + TEGRA_PINGROUP_SPI2_CS1_N, + TEGRA_PINGROUP_SPI2_CS2_N, + TEGRA_PINGROUP_SDMMC3_CLK, + TEGRA_PINGROUP_SDMMC3_CMD, + TEGRA_PINGROUP_SDMMC3_DAT0, + TEGRA_PINGROUP_SDMMC3_DAT1, + TEGRA_PINGROUP_SDMMC3_DAT2, + TEGRA_PINGROUP_SDMMC3_DAT3, + TEGRA_PINGROUP_SDMMC3_DAT4, + TEGRA_PINGROUP_SDMMC3_DAT5, + TEGRA_PINGROUP_SDMMC3_DAT6, + TEGRA_PINGROUP_SDMMC3_DAT7, + TEGRA_PINGROUP_PEX_L0_PRSNT_N, + TEGRA_PINGROUP_PEX_L0_RST_N, + TEGRA_PINGROUP_PEX_L0_CLKREQ_N, + TEGRA_PINGROUP_PEX_WAKE_N, + TEGRA_PINGROUP_PEX_L1_PRSNT_N, + TEGRA_PINGROUP_PEX_L1_RST_N, + TEGRA_PINGROUP_PEX_L1_CLKREQ_N, + TEGRA_PINGROUP_PEX_L2_PRSNT_N, + TEGRA_PINGROUP_PEX_L2_RST_N, + TEGRA_PINGROUP_PEX_L2_CLKREQ_N, + TEGRA_PINGROUP_HDMI_CEC, + TEGRA_MAX_PINGROUP, +}; + +enum tegra_drive_pingroup { + TEGRA_DRIVE_PINGROUP_AO1 = 0, + TEGRA_DRIVE_PINGROUP_AO2, + TEGRA_DRIVE_PINGROUP_AT1, + TEGRA_DRIVE_PINGROUP_AT2, + TEGRA_DRIVE_PINGROUP_AT3, + TEGRA_DRIVE_PINGROUP_AT4, + TEGRA_DRIVE_PINGROUP_AT5, + TEGRA_DRIVE_PINGROUP_CDEV1, + TEGRA_DRIVE_PINGROUP_CDEV2, + TEGRA_DRIVE_PINGROUP_CSUS, + TEGRA_DRIVE_PINGROUP_DAP1, + TEGRA_DRIVE_PINGROUP_DAP2, + TEGRA_DRIVE_PINGROUP_DAP3, + TEGRA_DRIVE_PINGROUP_DAP4, + TEGRA_DRIVE_PINGROUP_DBG, + TEGRA_DRIVE_PINGROUP_LCD1, + TEGRA_DRIVE_PINGROUP_LCD2, + TEGRA_DRIVE_PINGROUP_SDIO2, + TEGRA_DRIVE_PINGROUP_SDIO3, + TEGRA_DRIVE_PINGROUP_SPI, + TEGRA_DRIVE_PINGROUP_UAA, + TEGRA_DRIVE_PINGROUP_UAB, + TEGRA_DRIVE_PINGROUP_UART2, + TEGRA_DRIVE_PINGROUP_UART3, + TEGRA_DRIVE_PINGROUP_VI1, + TEGRA_DRIVE_PINGROUP_SDIO1, + TEGRA_DRIVE_PINGROUP_CRT, + TEGRA_DRIVE_PINGROUP_DDC, + TEGRA_DRIVE_PINGROUP_GMA, + TEGRA_DRIVE_PINGROUP_GMB, + TEGRA_DRIVE_PINGROUP_GMC, + TEGRA_DRIVE_PINGROUP_GMD, + TEGRA_DRIVE_PINGROUP_GME, + TEGRA_DRIVE_PINGROUP_GMF, + TEGRA_DRIVE_PINGROUP_GMG, + TEGRA_DRIVE_PINGROUP_GMH, + TEGRA_DRIVE_PINGROUP_OWR, + TEGRA_DRIVE_PINGROUP_UAD, + TEGRA_DRIVE_PINGROUP_GPV, + TEGRA_DRIVE_PINGROUP_DEV3, + TEGRA_DRIVE_PINGROUP_CEC, + TEGRA_MAX_DRIVE_PINGROUP, +}; + +#endif + diff --git a/arch/arm/mach-tegra/include/mach/pinmux.h b/arch/arm/mach-tegra/include/mach/pinmux.h index bb7dfdb61205..055f1792c8ff 100644 --- a/arch/arm/mach-tegra/include/mach/pinmux.h +++ b/arch/arm/mach-tegra/include/mach/pinmux.h @@ -2,6 +2,7 @@ * linux/arch/arm/mach-tegra/include/mach/pinmux.h * * Copyright (C) 2010 Google, Inc. + * Copyright (C) 2010,2011 Nvidia, Inc. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -17,18 +18,13 @@ #ifndef __MACH_TEGRA_PINMUX_H #define __MACH_TEGRA_PINMUX_H -#if defined(CONFIG_ARCH_TEGRA_2x_SOC) -#include "pinmux-t2.h" -#else -#error "Undefined Tegra architecture" -#endif - enum tegra_mux_func { TEGRA_MUX_RSVD = 0x8000, TEGRA_MUX_RSVD1 = 0x8000, TEGRA_MUX_RSVD2 = 0x8001, TEGRA_MUX_RSVD3 = 0x8002, TEGRA_MUX_RSVD4 = 0x8003, + TEGRA_MUX_INVALID = 0x4000, TEGRA_MUX_NONE = -1, TEGRA_MUX_AHB_CLK, TEGRA_MUX_APB_CLK, @@ -90,6 +86,49 @@ enum tegra_mux_func { TEGRA_MUX_VI, TEGRA_MUX_VI_SENSOR_CLK, TEGRA_MUX_XIO, + TEGRA_MUX_BLINK, + TEGRA_MUX_CEC, + TEGRA_MUX_CLK12, + TEGRA_MUX_DAP, + TEGRA_MUX_DAPSDMMC2, + TEGRA_MUX_DDR, + TEGRA_MUX_DEV3, + TEGRA_MUX_DTV, + TEGRA_MUX_VI_ALT1, + TEGRA_MUX_VI_ALT2, + TEGRA_MUX_VI_ALT3, + TEGRA_MUX_EMC_DLL, + TEGRA_MUX_EXTPERIPH1, + TEGRA_MUX_EXTPERIPH2, + TEGRA_MUX_EXTPERIPH3, + TEGRA_MUX_GMI_ALT, + TEGRA_MUX_HDA, + TEGRA_MUX_HSI, + TEGRA_MUX_I2C4, + TEGRA_MUX_I2C5, + TEGRA_MUX_I2CPWR, + TEGRA_MUX_I2S0, + TEGRA_MUX_I2S1, + TEGRA_MUX_I2S2, + TEGRA_MUX_I2S3, + TEGRA_MUX_I2S4, + TEGRA_MUX_NAND_ALT, + TEGRA_MUX_POPSDIO4, + TEGRA_MUX_POPSDMMC4, + TEGRA_MUX_PWM0, + TEGRA_MUX_PWM1, + TEGRA_MUX_PWM2, + TEGRA_MUX_PWM3, + TEGRA_MUX_SATA, + TEGRA_MUX_SPI5, + TEGRA_MUX_SPI6, + TEGRA_MUX_SYSCLK, + TEGRA_MUX_VGP1, + TEGRA_MUX_VGP2, + TEGRA_MUX_VGP3, + TEGRA_MUX_VGP4, + TEGRA_MUX_VGP5, + TEGRA_MUX_VGP6, TEGRA_MUX_SAFE, TEGRA_MAX_MUX, }; @@ -105,6 +144,11 @@ enum tegra_tristate { TEGRA_TRI_TRISTATE = 1, }; +enum tegra_pin_io { + TEGRA_PIN_OUTPUT = 0, + TEGRA_PIN_INPUT = 1, +}; + enum tegra_vddio { TEGRA_VDDIO_BB = 0, TEGRA_VDDIO_LCD, @@ -115,10 +159,16 @@ enum tegra_vddio { TEGRA_VDDIO_SYS, TEGRA_VDDIO_AUDIO, TEGRA_VDDIO_SD, + TEGRA_VDDIO_CAM, + TEGRA_VDDIO_GMI, + TEGRA_VDDIO_PEXCTL, + TEGRA_VDDIO_SDMMC1, + TEGRA_VDDIO_SDMMC3, + TEGRA_VDDIO_SDMMC4, }; struct tegra_pingroup_config { - enum tegra_pingroup pingroup; + int pingroup; enum tegra_mux_func func; enum tegra_pullupdown pupd; enum tegra_tristate tristate; @@ -187,7 +237,7 @@ enum tegra_schmitt { }; struct tegra_drive_pingroup_config { - enum tegra_drive_pingroup pingroup; + int pingroup; enum tegra_hsm hsm; enum tegra_schmitt schmitt; enum tegra_drive drive; @@ -208,6 +258,7 @@ struct tegra_pingroup_desc { int funcs[4]; int func_safe; int vddio; + enum tegra_pin_io io_default; s16 tri_bank; /* Register bank the tri_reg exists within */ s16 mux_bank; /* Register bank the mux_reg exists within */ s16 pupd_bank; /* Register bank the pupd_reg exists within */ @@ -217,15 +268,23 @@ struct tegra_pingroup_desc { s8 tri_bit; /* offset into the TRISTATE_REG_* register bit */ s8 mux_bit; /* offset into the PIN_MUX_CTL_* register bit */ s8 pupd_bit; /* offset into the PULL_UPDOWN_REG_* register bit */ + s8 lock_bit; /* offset of the LOCK bit into mux register bit */ + s8 od_bit; /* offset of the OD bit into mux register bit */ + s8 ioreset_bit; /* offset of the IO_RESET bit into mux register bit */ }; -extern const struct tegra_pingroup_desc tegra_soc_pingroups[]; -extern const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[]; +typedef void (*pinmux_init) (const struct tegra_pingroup_desc **pg, + int *pg_max, const struct tegra_drive_pingroup_desc **pgdrive, + int *pgdrive_max); -int tegra_pinmux_set_tristate(enum tegra_pingroup pg, - enum tegra_tristate tristate); -int tegra_pinmux_set_pullupdown(enum tegra_pingroup pg, - enum tegra_pullupdown pupd); +void tegra20_pinmux_init(const struct tegra_pingroup_desc **pg, int *pg_max, + const struct tegra_drive_pingroup_desc **pgdrive, int *pgdrive_max); + +void tegra30_pinmux_init(const struct tegra_pingroup_desc **pg, int *pg_max, + const struct tegra_drive_pingroup_desc **pgdrive, int *pgdrive_max); + +int tegra_pinmux_set_tristate(int pg, enum tegra_tristate tristate); +int tegra_pinmux_set_pullupdown(int pg, enum tegra_pullupdown pupd); void tegra_pinmux_config_table(const struct tegra_pingroup_config *config, int len); @@ -241,4 +300,3 @@ void tegra_pinmux_config_tristate_table(const struct tegra_pingroup_config *conf void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *config, int len, enum tegra_pullupdown pupd); #endif - diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/include/mach/system.h index 027c4215d313..a312988bf6f8 100644 --- a/arch/arm/mach-tegra/include/mach/system.h +++ b/arch/arm/mach-tegra/include/mach/system.h @@ -21,10 +21,6 @@ #ifndef __MACH_TEGRA_SYSTEM_H #define __MACH_TEGRA_SYSTEM_H -#include <mach/iomap.h> - -extern void (*arch_reset)(char mode, const char *cmd); - static inline void arch_idle(void) { } diff --git a/arch/arm/mach-tegra/include/mach/vmalloc.h b/arch/arm/mach-tegra/include/mach/vmalloc.h deleted file mode 100644 index fd6aa65b2dc6..000000000000 --- a/arch/arm/mach-tegra/include/mach/vmalloc.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/vmalloc.h - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross <ccross@google.com> - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_TEGRA_VMALLOC_H -#define __MACH_TEGRA_VMALLOC_H - -#include <asm/sizes.h> - -#define VMALLOC_END 0xFE000000UL - -#endif diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c index 5489f8b5d6ad..d23ee2db2827 100644 --- a/arch/arm/mach-tegra/io.c +++ b/arch/arm/mach-tegra/io.c @@ -60,24 +60,3 @@ void __init tegra_map_common_io(void) { iotable_init(tegra_io_desc, ARRAY_SIZE(tegra_io_desc)); } - -/* - * Intercept ioremap() requests for addresses in our fixed mapping regions. - */ -void __iomem *tegra_ioremap(unsigned long p, size_t size, unsigned int type) -{ - void __iomem *v = IO_ADDRESS(p); - if (v == NULL) - v = __arm_ioremap(p, size, type); - return v; -} -EXPORT_SYMBOL(tegra_ioremap); - -void tegra_iounmap(volatile void __iomem *addr) -{ - unsigned long virt = (unsigned long)addr; - - if (virt >= VMALLOC_START && virt < VMALLOC_END) - __iounmap(addr); -} -EXPORT_SYMBOL(tegra_iounmap); diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index 4956c3cea731..4e1afcd54fae 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -21,6 +21,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/of.h> #include <asm/hardware/gic.h> @@ -28,10 +29,6 @@ #include "board.h" -#define INT_SYS_NR (INT_GPIO_BASE - INT_PRI_BASE) -#define INT_SYS_SZ (INT_SEC_BASE - INT_PRI_BASE) -#define PPI_NR ((INT_SYS_NR+INT_SYS_SZ-1)/INT_SYS_SZ) - #define ICTLR_CPU_IEP_VFIQ 0x08 #define ICTLR_CPU_IEP_FIR 0x14 #define ICTLR_CPU_IEP_FIR_SET 0x18 @@ -129,6 +126,11 @@ void __init tegra_init_irq(void) gic_arch_extn.irq_unmask = tegra_unmask; gic_arch_extn.irq_retrigger = tegra_retrigger; - gic_init(0, 29, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE), - IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100)); + /* + * Check if there is a devicetree present, since the GIC will be + * initialized elsewhere under DT. + */ + if (!of_have_populated_dt()) + gic_init(0, 29, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE), + IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100)); } diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c index 97ef3e55dfdf..af8b63435727 100644 --- a/arch/arm/mach-tegra/pcie.c +++ b/arch/arm/mach-tegra/pcie.c @@ -37,7 +37,6 @@ #include <asm/sizes.h> #include <asm/mach/pci.h> -#include <mach/pinmux.h> #include <mach/iomap.h> #include <mach/clk.h> #include <mach/powergate.h> @@ -409,7 +408,7 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) pp->res[0].flags = IORESOURCE_IO; if (request_resource(&ioport_resource, &pp->res[0])) panic("Request PCIe IO resource failed\n"); - sys->resource[0] = &pp->res[0]; + pci_add_resource(&sys->resources, &pp->res[0]); /* * IORESOURCE_MEM @@ -428,7 +427,7 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) pp->res[1].flags = IORESOURCE_MEM; if (request_resource(&iomem_resource, &pp->res[1])) panic("Request PCIe Memory resource failed\n"); - sys->resource[1] = &pp->res[1]; + pci_add_resource(&sys->resources, &pp->res[1]); /* * IORESOURCE_MEM | IORESOURCE_PREFETCH @@ -447,7 +446,7 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) pp->res[2].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; if (request_resource(&iomem_resource, &pp->res[2])) panic("Request PCIe Prefetch Memory resource failed\n"); - sys->resource[2] = &pp->res[2]; + pci_add_resource(&sys->resources, &pp->res[2]); return 1; } @@ -468,7 +467,8 @@ static struct pci_bus __init *tegra_pcie_scan_bus(int nr, pp = tegra_pcie.port + nr; pp->root_bus_nr = sys->busnr; - return pci_scan_bus(sys->busnr, &tegra_pcie_ops, sys); + return pci_scan_root_bus(NULL, sys->busnr, &tegra_pcie_ops, sys, + &sys->resources); } static struct hw_pci tegra_pcie_hw __initdata = { diff --git a/arch/arm/mach-tegra/pinmux-t2-tables.c b/arch/arm/mach-tegra/pinmux-tegra20-tables.c index a0dc2bc28ed3..734add1280b7 100644 --- a/arch/arm/mach-tegra/pinmux-t2-tables.c +++ b/arch/arm/mach-tegra/pinmux-tegra20-tables.c @@ -1,7 +1,7 @@ /* - * linux/arch/arm/mach-tegra/pinmux-t2-tables.c + * linux/arch/arm/mach-tegra/pinmux-tegra20-tables.c * - * Common pinmux configurations for Tegra 2 SoCs + * Common pinmux configurations for Tegra20 SoCs * * Copyright (C) 2010 NVIDIA Corporation * @@ -29,6 +29,7 @@ #include <mach/iomap.h> #include <mach/pinmux.h> +#include <mach/pinmux-tegra20.h> #include <mach/suspend.h> #define TRISTATE_REG_A 0x14 @@ -43,7 +44,7 @@ .reg = ((r) - PINGROUP_REG_A) \ } -const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE_PINGROUP] = { +static const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE_PINGROUP] = { DRIVE_PINGROUP(AO1, 0x868), DRIVE_PINGROUP(AO2, 0x86c), DRIVE_PINGROUP(AT1, 0x870), @@ -105,9 +106,13 @@ const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE .pupd_bank = 2, \ .pupd_reg = ((pupd_r) - PULLUPDOWN_REG_A), \ .pupd_bit = pupd_b, \ + .lock_bit = -1, \ + .od_bit = -1, \ + .ioreset_bit = -1, \ + .io_default = -1, \ } -const struct tegra_pingroup_desc tegra_soc_pingroups[TEGRA_MAX_PINGROUP] = { +static const struct tegra_pingroup_desc tegra_soc_pingroups[TEGRA_MAX_PINGROUP] = { PINGROUP(ATA, NAND, IDE, NAND, GMI, RSVD, IDE, 0x14, 0, 0x80, 24, 0xA0, 0), PINGROUP(ATB, NAND, IDE, NAND, GMI, SDIO4, IDE, 0x14, 1, 0x80, 16, 0xA0, 2), PINGROUP(ATC, NAND, IDE, NAND, GMI, SDIO4, IDE, 0x14, 2, 0x80, 22, 0xA0, 4), @@ -226,3 +231,14 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[TEGRA_MAX_PINGROUP] = { PINGROUP(XM2C, DDR, RSVD, RSVD, RSVD, RSVD, RSVD, -1, -1, -1, -1, 0xA8, 30), PINGROUP(XM2D, DDR, RSVD, RSVD, RSVD, RSVD, RSVD, -1, -1, -1, -1, 0xA8, 28), }; + +void __devinit tegra20_pinmux_init(const struct tegra_pingroup_desc **pg, + int *pg_max, const struct tegra_drive_pingroup_desc **pgdrive, + int *pgdrive_max) +{ + *pg = tegra_soc_pingroups; + *pg_max = TEGRA_MAX_PINGROUP; + *pgdrive = tegra_soc_drive_pingroups; + *pgdrive_max = TEGRA_MAX_DRIVE_PINGROUP; +} + diff --git a/arch/arm/mach-tegra/pinmux-tegra30-tables.c b/arch/arm/mach-tegra/pinmux-tegra30-tables.c new file mode 100644 index 000000000000..14fc0e4c1c44 --- /dev/null +++ b/arch/arm/mach-tegra/pinmux-tegra30-tables.c @@ -0,0 +1,376 @@ +/* + * linux/arch/arm/mach-tegra/pinmux-tegra30-tables.c + * + * Common pinmux configurations for Tegra30 SoCs + * + * Copyright (C) 2010,2011 NVIDIA Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/init.h> +#include <linux/string.h> + +#include <mach/iomap.h> +#include <mach/pinmux.h> +#include <mach/pinmux-tegra30.h> +#include <mach/suspend.h> + +#define PINGROUP_REG_A 0x868 +#define MUXCTL_REG_A 0x3000 + +#define DRIVE_PINGROUP(pg_name, r) \ + [TEGRA_DRIVE_PINGROUP_ ## pg_name] = { \ + .name = #pg_name, \ + .reg_bank = 0, \ + .reg = ((r) - PINGROUP_REG_A) \ + } + +static const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE_PINGROUP] = { + DRIVE_PINGROUP(AO1, 0x868), + DRIVE_PINGROUP(AO2, 0x86c), + DRIVE_PINGROUP(AT1, 0x870), + DRIVE_PINGROUP(AT2, 0x874), + DRIVE_PINGROUP(AT3, 0x878), + DRIVE_PINGROUP(AT4, 0x87c), + DRIVE_PINGROUP(AT5, 0x880), + DRIVE_PINGROUP(CDEV1, 0x884), + DRIVE_PINGROUP(CDEV2, 0x888), + DRIVE_PINGROUP(CSUS, 0x88c), + DRIVE_PINGROUP(DAP1, 0x890), + DRIVE_PINGROUP(DAP2, 0x894), + DRIVE_PINGROUP(DAP3, 0x898), + DRIVE_PINGROUP(DAP4, 0x89c), + DRIVE_PINGROUP(DBG, 0x8a0), + DRIVE_PINGROUP(LCD1, 0x8a4), + DRIVE_PINGROUP(LCD2, 0x8a8), + DRIVE_PINGROUP(SDIO2, 0x8ac), + DRIVE_PINGROUP(SDIO3, 0x8b0), + DRIVE_PINGROUP(SPI, 0x8b4), + DRIVE_PINGROUP(UAA, 0x8b8), + DRIVE_PINGROUP(UAB, 0x8bc), + DRIVE_PINGROUP(UART2, 0x8c0), + DRIVE_PINGROUP(UART3, 0x8c4), + DRIVE_PINGROUP(VI1, 0x8c8), + DRIVE_PINGROUP(SDIO1, 0x8ec), + DRIVE_PINGROUP(CRT, 0x8f8), + DRIVE_PINGROUP(DDC, 0x8fc), + DRIVE_PINGROUP(GMA, 0x900), + DRIVE_PINGROUP(GMB, 0x904), + DRIVE_PINGROUP(GMC, 0x908), + DRIVE_PINGROUP(GMD, 0x90c), + DRIVE_PINGROUP(GME, 0x910), + DRIVE_PINGROUP(GMF, 0x914), + DRIVE_PINGROUP(GMG, 0x918), + DRIVE_PINGROUP(GMH, 0x91c), + DRIVE_PINGROUP(OWR, 0x920), + DRIVE_PINGROUP(UAD, 0x924), + DRIVE_PINGROUP(GPV, 0x928), + DRIVE_PINGROUP(DEV3, 0x92c), + DRIVE_PINGROUP(CEC, 0x938), +}; + +#define PINGROUP(pg_name, vdd, f0, f1, f2, f3, fs, iod, reg) \ + [TEGRA_PINGROUP_ ## pg_name] = { \ + .name = #pg_name, \ + .vddio = TEGRA_VDDIO_ ## vdd, \ + .funcs = { \ + TEGRA_MUX_ ## f0, \ + TEGRA_MUX_ ## f1, \ + TEGRA_MUX_ ## f2, \ + TEGRA_MUX_ ## f3, \ + }, \ + .func_safe = TEGRA_MUX_ ## fs, \ + .tri_bank = 1, \ + .tri_reg = ((reg) - MUXCTL_REG_A), \ + .tri_bit = 4, \ + .mux_bank = 1, \ + .mux_reg = ((reg) - MUXCTL_REG_A), \ + .mux_bit = 0, \ + .pupd_bank = 1, \ + .pupd_reg = ((reg) - MUXCTL_REG_A), \ + .pupd_bit = 2, \ + .io_default = TEGRA_PIN_ ## iod, \ + .od_bit = 6, \ + .lock_bit = 7, \ + .ioreset_bit = 8, \ + } + +static const struct tegra_pingroup_desc tegra_soc_pingroups[TEGRA_MAX_PINGROUP] = { + /* NAME VDD f0 f1 f2 f3 fSafe io reg */ + PINGROUP(ULPI_DATA0, BB, SPI3, HSI, UARTA, ULPI, RSVD, INPUT, 0x3000), + PINGROUP(ULPI_DATA1, BB, SPI3, HSI, UARTA, ULPI, RSVD, INPUT, 0x3004), + PINGROUP(ULPI_DATA2, BB, SPI3, HSI, UARTA, ULPI, RSVD, INPUT, 0x3008), + PINGROUP(ULPI_DATA3, BB, SPI3, HSI, UARTA, ULPI, RSVD, INPUT, 0x300c), + PINGROUP(ULPI_DATA4, BB, SPI2, HSI, UARTA, ULPI, RSVD, INPUT, 0x3010), + PINGROUP(ULPI_DATA5, BB, SPI2, HSI, UARTA, ULPI, RSVD, INPUT, 0x3014), + PINGROUP(ULPI_DATA6, BB, SPI2, HSI, UARTA, ULPI, RSVD, INPUT, 0x3018), + PINGROUP(ULPI_DATA7, BB, SPI2, HSI, UARTA, ULPI, RSVD, INPUT, 0x301c), + PINGROUP(ULPI_CLK, BB, SPI1, RSVD, UARTD, ULPI, RSVD, INPUT, 0x3020), + PINGROUP(ULPI_DIR, BB, SPI1, RSVD, UARTD, ULPI, RSVD, INPUT, 0x3024), + PINGROUP(ULPI_NXT, BB, SPI1, RSVD, UARTD, ULPI, RSVD, INPUT, 0x3028), + PINGROUP(ULPI_STP, BB, SPI1, RSVD, UARTD, ULPI, RSVD, INPUT, 0x302c), + PINGROUP(DAP3_FS, BB, I2S2, RSVD1, DISPLAYA, DISPLAYB, RSVD, INPUT, 0x3030), + PINGROUP(DAP3_DIN, BB, I2S2, RSVD1, DISPLAYA, DISPLAYB, RSVD, INPUT, 0x3034), + PINGROUP(DAP3_DOUT, BB, I2S2, RSVD1, DISPLAYA, DISPLAYB, RSVD, INPUT, 0x3038), + PINGROUP(DAP3_SCLK, BB, I2S2, RSVD1, DISPLAYA, DISPLAYB, RSVD, INPUT, 0x303c), + PINGROUP(GPIO_PV0, BB, RSVD, RSVD, RSVD, RSVD, RSVD, INPUT, 0x3040), + PINGROUP(GPIO_PV1, BB, RSVD, RSVD, RSVD, RSVD, RSVD, INPUT, 0x3044), + PINGROUP(SDMMC1_CLK, SDMMC1, SDIO1, RSVD1, RSVD2, INVALID, RSVD, INPUT, 0x3048), + PINGROUP(SDMMC1_CMD, SDMMC1, SDIO1, RSVD1, RSVD2, INVALID, RSVD, INPUT, 0x304c), + PINGROUP(SDMMC1_DAT3, SDMMC1, SDIO1, RSVD1, UARTE, INVALID, RSVD, INPUT, 0x3050), + PINGROUP(SDMMC1_DAT2, SDMMC1, SDIO1, RSVD1, UARTE, INVALID, RSVD, INPUT, 0x3054), + PINGROUP(SDMMC1_DAT1, SDMMC1, SDIO1, RSVD1, UARTE, INVALID, RSVD, INPUT, 0x3058), + PINGROUP(SDMMC1_DAT0, SDMMC1, SDIO1, RSVD1, UARTE, INVALID, RSVD, INPUT, 0x305c), + PINGROUP(GPIO_PV2, SDMMC1, OWR, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x3060), + PINGROUP(GPIO_PV3, SDMMC1, INVALID, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x3064), + PINGROUP(CLK2_OUT, SDMMC1, EXTPERIPH2, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x3068), + PINGROUP(CLK2_REQ, SDMMC1, DAP, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x306c), + PINGROUP(LCD_PWR1, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x3070), + PINGROUP(LCD_PWR2, LCD, DISPLAYA, DISPLAYB, SPI5, INVALID, RSVD, OUTPUT, 0x3074), + PINGROUP(LCD_SDIN, LCD, DISPLAYA, DISPLAYB, SPI5, RSVD, RSVD, OUTPUT, 0x3078), + PINGROUP(LCD_SDOUT, LCD, DISPLAYA, DISPLAYB, SPI5, INVALID, RSVD, OUTPUT, 0x307c), + PINGROUP(LCD_WR_N, LCD, DISPLAYA, DISPLAYB, SPI5, INVALID, RSVD, OUTPUT, 0x3080), + PINGROUP(LCD_CS0_N, LCD, DISPLAYA, DISPLAYB, SPI5, RSVD, RSVD, OUTPUT, 0x3084), + PINGROUP(LCD_DC0, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x3088), + PINGROUP(LCD_SCK, LCD, DISPLAYA, DISPLAYB, SPI5, INVALID, RSVD, OUTPUT, 0x308c), + PINGROUP(LCD_PWR0, LCD, DISPLAYA, DISPLAYB, SPI5, INVALID, RSVD, OUTPUT, 0x3090), + PINGROUP(LCD_PCLK, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x3094), + PINGROUP(LCD_DE, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x3098), + PINGROUP(LCD_HSYNC, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x309c), + PINGROUP(LCD_VSYNC, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30a0), + PINGROUP(LCD_D0, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30a4), + PINGROUP(LCD_D1, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30a8), + PINGROUP(LCD_D2, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30ac), + PINGROUP(LCD_D3, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30b0), + PINGROUP(LCD_D4, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30b4), + PINGROUP(LCD_D5, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30b8), + PINGROUP(LCD_D6, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30bc), + PINGROUP(LCD_D7, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30c0), + PINGROUP(LCD_D8, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30c4), + PINGROUP(LCD_D9, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30c8), + PINGROUP(LCD_D10, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30cc), + PINGROUP(LCD_D11, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30d0), + PINGROUP(LCD_D12, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30d4), + PINGROUP(LCD_D13, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30d8), + PINGROUP(LCD_D14, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30dc), + PINGROUP(LCD_D15, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30e0), + PINGROUP(LCD_D16, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30e4), + PINGROUP(LCD_D17, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30e8), + PINGROUP(LCD_D18, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30ec), + PINGROUP(LCD_D19, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30f0), + PINGROUP(LCD_D20, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30f4), + PINGROUP(LCD_D21, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30f8), + PINGROUP(LCD_D22, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x30fc), + PINGROUP(LCD_D23, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x3100), + PINGROUP(LCD_CS1_N, LCD, DISPLAYA, DISPLAYB, SPI5, RSVD2, RSVD, OUTPUT, 0x3104), + PINGROUP(LCD_M1, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x3108), + PINGROUP(LCD_DC1, LCD, DISPLAYA, DISPLAYB, RSVD1, RSVD2, RSVD, OUTPUT, 0x310c), + PINGROUP(HDMI_INT, LCD, RSVD, RSVD, RSVD, RSVD, RSVD, INPUT, 0x3110), + PINGROUP(DDC_SCL, LCD, I2C4, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x3114), + PINGROUP(DDC_SDA, LCD, I2C4, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x3118), + PINGROUP(CRT_HSYNC, LCD, CRT, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x311c), + PINGROUP(CRT_VSYNC, LCD, CRT, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x3120), + PINGROUP(VI_D0, VI, INVALID, RSVD1, VI, RSVD2, RSVD, INPUT, 0x3124), + PINGROUP(VI_D1, VI, INVALID, SDIO2, VI, RSVD1, RSVD, INPUT, 0x3128), + PINGROUP(VI_D2, VI, INVALID, SDIO2, VI, RSVD1, RSVD, INPUT, 0x312c), + PINGROUP(VI_D3, VI, INVALID, SDIO2, VI, RSVD1, RSVD, INPUT, 0x3130), + PINGROUP(VI_D4, VI, INVALID, SDIO2, VI, RSVD1, RSVD, INPUT, 0x3134), + PINGROUP(VI_D5, VI, INVALID, SDIO2, VI, RSVD1, RSVD, INPUT, 0x3138), + PINGROUP(VI_D6, VI, INVALID, SDIO2, VI, RSVD1, RSVD, INPUT, 0x313c), + PINGROUP(VI_D7, VI, INVALID, SDIO2, VI, RSVD1, RSVD, INPUT, 0x3140), + PINGROUP(VI_D8, VI, INVALID, SDIO2, VI, RSVD1, RSVD, INPUT, 0x3144), + PINGROUP(VI_D9, VI, INVALID, SDIO2, VI, RSVD1, RSVD, INPUT, 0x3148), + PINGROUP(VI_D10, VI, INVALID, RSVD1, VI, RSVD2, RSVD, INPUT, 0x314c), + PINGROUP(VI_D11, VI, INVALID, RSVD1, VI, RSVD2, RSVD, INPUT, 0x3150), + PINGROUP(VI_PCLK, VI, RSVD1, SDIO2, VI, RSVD2, RSVD, INPUT, 0x3154), + PINGROUP(VI_MCLK, VI, VI, INVALID, INVALID, INVALID, RSVD, INPUT, 0x3158), + PINGROUP(VI_VSYNC, VI, INVALID, RSVD1, VI, RSVD2, RSVD, INPUT, 0x315c), + PINGROUP(VI_HSYNC, VI, INVALID, RSVD1, VI, RSVD2, RSVD, INPUT, 0x3160), + PINGROUP(UART2_RXD, UART, IRDA, SPDIF, UARTA, SPI4, RSVD, INPUT, 0x3164), + PINGROUP(UART2_TXD, UART, IRDA, SPDIF, UARTA, SPI4, RSVD, INPUT, 0x3168), + PINGROUP(UART2_RTS_N, UART, UARTA, UARTB, GMI, SPI4, RSVD, INPUT, 0x316c), + PINGROUP(UART2_CTS_N, UART, UARTA, UARTB, GMI, SPI4, RSVD, INPUT, 0x3170), + PINGROUP(UART3_TXD, UART, UARTC, RSVD1, GMI, RSVD2, RSVD, INPUT, 0x3174), + PINGROUP(UART3_RXD, UART, UARTC, RSVD1, GMI, RSVD2, RSVD, INPUT, 0x3178), + PINGROUP(UART3_CTS_N, UART, UARTC, RSVD1, GMI, RSVD2, RSVD, INPUT, 0x317c), + PINGROUP(UART3_RTS_N, UART, UARTC, PWM0, GMI, RSVD2, RSVD, INPUT, 0x3180), + PINGROUP(GPIO_PU0, UART, OWR, UARTA, GMI, RSVD1, RSVD, INPUT, 0x3184), + PINGROUP(GPIO_PU1, UART, RSVD1, UARTA, GMI, RSVD2, RSVD, INPUT, 0x3188), + PINGROUP(GPIO_PU2, UART, RSVD1, UARTA, GMI, RSVD2, RSVD, INPUT, 0x318c), + PINGROUP(GPIO_PU3, UART, PWM0, UARTA, GMI, RSVD1, RSVD, INPUT, 0x3190), + PINGROUP(GPIO_PU4, UART, PWM1, UARTA, GMI, RSVD1, RSVD, INPUT, 0x3194), + PINGROUP(GPIO_PU5, UART, PWM2, UARTA, GMI, RSVD1, RSVD, INPUT, 0x3198), + PINGROUP(GPIO_PU6, UART, PWM3, UARTA, GMI, RSVD1, RSVD, INPUT, 0x319c), + PINGROUP(GEN1_I2C_SDA, UART, I2C, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x31a0), + PINGROUP(GEN1_I2C_SCL, UART, I2C, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x31a4), + PINGROUP(DAP4_FS, UART, I2S3, RSVD1, GMI, RSVD2, RSVD, INPUT, 0x31a8), + PINGROUP(DAP4_DIN, UART, I2S3, RSVD1, GMI, RSVD2, RSVD, INPUT, 0x31ac), + PINGROUP(DAP4_DOUT, UART, I2S3, RSVD1, GMI, RSVD2, RSVD, INPUT, 0x31b0), + PINGROUP(DAP4_SCLK, UART, I2S3, RSVD1, GMI, RSVD2, RSVD, INPUT, 0x31b4), + PINGROUP(CLK3_OUT, UART, EXTPERIPH3, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x31b8), + PINGROUP(CLK3_REQ, UART, DEV3, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x31bc), + PINGROUP(GMI_WP_N, GMI, RSVD1, NAND, GMI, GMI_ALT, RSVD, INPUT, 0x31c0), + PINGROUP(GMI_IORDY, GMI, RSVD1, NAND, GMI, RSVD2, RSVD, INPUT, 0x31c4), + PINGROUP(GMI_WAIT, GMI, RSVD1, NAND, GMI, RSVD2, RSVD, INPUT, 0x31c8), + PINGROUP(GMI_ADV_N, GMI, RSVD1, NAND, GMI, RSVD2, RSVD, INPUT, 0x31cc), + PINGROUP(GMI_CLK, GMI, RSVD1, NAND, GMI, RSVD2, RSVD, INPUT, 0x31d0), + PINGROUP(GMI_CS0_N, GMI, RSVD1, NAND, GMI, INVALID, RSVD, INPUT, 0x31d4), + PINGROUP(GMI_CS1_N, GMI, RSVD1, NAND, GMI, DTV, RSVD, INPUT, 0x31d8), + PINGROUP(GMI_CS2_N, GMI, RSVD1, NAND, GMI, RSVD2, RSVD, INPUT, 0x31dc), + PINGROUP(GMI_CS3_N, GMI, RSVD1, NAND, GMI, GMI_ALT, RSVD, INPUT, 0x31e0), + PINGROUP(GMI_CS4_N, GMI, RSVD1, NAND, GMI, RSVD2, RSVD, INPUT, 0x31e4), + PINGROUP(GMI_CS6_N, GMI, NAND, NAND_ALT, GMI, SATA, RSVD, INPUT, 0x31e8), + PINGROUP(GMI_CS7_N, GMI, NAND, NAND_ALT, GMI, GMI_ALT, RSVD, INPUT, 0x31ec), + PINGROUP(GMI_AD0, GMI, RSVD1, NAND, GMI, RSVD2, RSVD, INPUT, 0x31f0), + PINGROUP(GMI_AD1, GMI, RSVD1, NAND, GMI, RSVD2, RSVD, INPUT, 0x31f4), + PINGROUP(GMI_AD2, GMI, RSVD1, NAND, GMI, RSVD2, RSVD, INPUT, 0x31f8), + PINGROUP(GMI_AD3, GMI, RSVD1, NAND, GMI, RSVD2, RSVD, INPUT, 0x31fc), + PINGROUP(GMI_AD4, GMI, RSVD1, NAND, GMI, RSVD2, RSVD, INPUT, 0x3200), + PINGROUP(GMI_AD5, GMI, RSVD1, NAND, GMI, RSVD2, RSVD, INPUT, 0x3204), + PINGROUP(GMI_AD6, GMI, RSVD1, NAND, GMI, RSVD2, RSVD, INPUT, 0x3208), + PINGROUP(GMI_AD7, GMI, RSVD1, NAND, GMI, RSVD2, RSVD, INPUT, 0x320c), + PINGROUP(GMI_AD8, GMI, PWM0, NAND, GMI, RSVD2, RSVD, INPUT, 0x3210), + PINGROUP(GMI_AD9, GMI, PWM1, NAND, GMI, RSVD2, RSVD, INPUT, 0x3214), + PINGROUP(GMI_AD10, GMI, PWM2, NAND, GMI, RSVD2, RSVD, INPUT, 0x3218), + PINGROUP(GMI_AD11, GMI, PWM3, NAND, GMI, RSVD2, RSVD, INPUT, 0x321c), + PINGROUP(GMI_AD12, GMI, RSVD1, NAND, GMI, RSVD2, RSVD, INPUT, 0x3220), + PINGROUP(GMI_AD13, GMI, RSVD1, NAND, GMI, RSVD2, RSVD, INPUT, 0x3224), + PINGROUP(GMI_AD14, GMI, RSVD1, NAND, GMI, RSVD2, RSVD, INPUT, 0x3228), + PINGROUP(GMI_AD15, GMI, RSVD1, NAND, GMI, RSVD2, RSVD, INPUT, 0x322c), + PINGROUP(GMI_A16, GMI, UARTD, SPI4, GMI, GMI_ALT, RSVD, INPUT, 0x3230), + PINGROUP(GMI_A17, GMI, UARTD, SPI4, GMI, INVALID, RSVD, INPUT, 0x3234), + PINGROUP(GMI_A18, GMI, UARTD, SPI4, GMI, INVALID, RSVD, INPUT, 0x3238), + PINGROUP(GMI_A19, GMI, UARTD, SPI4, GMI, RSVD3, RSVD, INPUT, 0x323c), + PINGROUP(GMI_WR_N, GMI, RSVD1, NAND, GMI, RSVD3, RSVD, INPUT, 0x3240), + PINGROUP(GMI_OE_N, GMI, RSVD1, NAND, GMI, RSVD3, RSVD, INPUT, 0x3244), + PINGROUP(GMI_DQS, GMI, RSVD1, NAND, GMI, RSVD3, RSVD, INPUT, 0x3248), + PINGROUP(GMI_RST_N, GMI, NAND, NAND_ALT, GMI, RSVD3, RSVD, INPUT, 0x324c), + PINGROUP(GEN2_I2C_SCL, GMI, I2C2, INVALID, GMI, RSVD3, RSVD, INPUT, 0x3250), + PINGROUP(GEN2_I2C_SDA, GMI, I2C2, INVALID, GMI, RSVD3, RSVD, INPUT, 0x3254), + PINGROUP(SDMMC4_CLK, SDMMC4, INVALID, NAND, GMI, SDIO4, RSVD, INPUT, 0x3258), + PINGROUP(SDMMC4_CMD, SDMMC4, I2C3, NAND, GMI, SDIO4, RSVD, INPUT, 0x325c), + PINGROUP(SDMMC4_DAT0, SDMMC4, UARTE, SPI3, GMI, SDIO4, RSVD, INPUT, 0x3260), + PINGROUP(SDMMC4_DAT1, SDMMC4, UARTE, SPI3, GMI, SDIO4, RSVD, INPUT, 0x3264), + PINGROUP(SDMMC4_DAT2, SDMMC4, UARTE, SPI3, GMI, SDIO4, RSVD, INPUT, 0x3268), + PINGROUP(SDMMC4_DAT3, SDMMC4, UARTE, SPI3, GMI, SDIO4, RSVD, INPUT, 0x326c), + PINGROUP(SDMMC4_DAT4, SDMMC4, I2C3, I2S4, GMI, SDIO4, RSVD, INPUT, 0x3270), + PINGROUP(SDMMC4_DAT5, SDMMC4, VGP3, I2S4, GMI, SDIO4, RSVD, INPUT, 0x3274), + PINGROUP(SDMMC4_DAT6, SDMMC4, VGP4, I2S4, GMI, SDIO4, RSVD, INPUT, 0x3278), + PINGROUP(SDMMC4_DAT7, SDMMC4, VGP5, I2S4, GMI, SDIO4, RSVD, INPUT, 0x327c), + PINGROUP(SDMMC4_RST_N, SDMMC4, VGP6, RSVD1, RSVD2, POPSDMMC4, RSVD, INPUT, 0x3280), + PINGROUP(CAM_MCLK, CAM, VI, INVALID, VI_ALT2, POPSDMMC4, RSVD, INPUT, 0x3284), + PINGROUP(GPIO_PCC1, CAM, I2S4, RSVD1, RSVD2, POPSDMMC4, RSVD, INPUT, 0x3288), + PINGROUP(GPIO_PBB0, CAM, I2S4, RSVD1, RSVD2, POPSDMMC4, RSVD, INPUT, 0x328c), + PINGROUP(CAM_I2C_SCL, CAM, INVALID, I2C3, RSVD2, POPSDMMC4, RSVD, INPUT, 0x3290), + PINGROUP(CAM_I2C_SDA, CAM, INVALID, I2C3, RSVD2, POPSDMMC4, RSVD, INPUT, 0x3294), + PINGROUP(GPIO_PBB3, CAM, VGP3, DISPLAYA, DISPLAYB, POPSDMMC4, RSVD, INPUT, 0x3298), + PINGROUP(GPIO_PBB4, CAM, VGP4, DISPLAYA, DISPLAYB, POPSDMMC4, RSVD, INPUT, 0x329c), + PINGROUP(GPIO_PBB5, CAM, VGP5, DISPLAYA, DISPLAYB, POPSDMMC4, RSVD, INPUT, 0x32a0), + PINGROUP(GPIO_PBB6, CAM, VGP6, DISPLAYA, DISPLAYB, POPSDMMC4, RSVD, INPUT, 0x32a4), + PINGROUP(GPIO_PBB7, CAM, I2S4, RSVD1, RSVD2, POPSDMMC4, RSVD, INPUT, 0x32a8), + PINGROUP(GPIO_PCC2, CAM, I2S4, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x32ac), + PINGROUP(JTAG_RTCK, SYS, RTCK, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x32b0), + PINGROUP(PWR_I2C_SCL, SYS, I2CPWR, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x32b4), + PINGROUP(PWR_I2C_SDA, SYS, I2CPWR, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x32b8), + PINGROUP(KB_ROW0, SYS, KBC, INVALID, RSVD2, RSVD3, RSVD, INPUT, 0x32bc), + PINGROUP(KB_ROW1, SYS, KBC, INVALID, RSVD2, RSVD3, RSVD, INPUT, 0x32c0), + PINGROUP(KB_ROW2, SYS, KBC, INVALID, RSVD2, RSVD3, RSVD, INPUT, 0x32c4), + PINGROUP(KB_ROW3, SYS, KBC, INVALID, RSVD2, INVALID, RSVD, INPUT, 0x32c8), + PINGROUP(KB_ROW4, SYS, KBC, INVALID, TRACE, RSVD3, RSVD, INPUT, 0x32cc), + PINGROUP(KB_ROW5, SYS, KBC, INVALID, TRACE, OWR, RSVD, INPUT, 0x32d0), + PINGROUP(KB_ROW6, SYS, KBC, INVALID, SDIO2, INVALID, RSVD, INPUT, 0x32d4), + PINGROUP(KB_ROW7, SYS, KBC, INVALID, SDIO2, INVALID, RSVD, INPUT, 0x32d8), + PINGROUP(KB_ROW8, SYS, KBC, INVALID, SDIO2, INVALID, RSVD, INPUT, 0x32dc), + PINGROUP(KB_ROW9, SYS, KBC, INVALID, SDIO2, INVALID, RSVD, INPUT, 0x32e0), + PINGROUP(KB_ROW10, SYS, KBC, INVALID, SDIO2, INVALID, RSVD, INPUT, 0x32e4), + PINGROUP(KB_ROW11, SYS, KBC, INVALID, SDIO2, INVALID, RSVD, INPUT, 0x32e8), + PINGROUP(KB_ROW12, SYS, KBC, INVALID, SDIO2, INVALID, RSVD, INPUT, 0x32ec), + PINGROUP(KB_ROW13, SYS, KBC, INVALID, SDIO2, INVALID, RSVD, INPUT, 0x32f0), + PINGROUP(KB_ROW14, SYS, KBC, INVALID, SDIO2, INVALID, RSVD, INPUT, 0x32f4), + PINGROUP(KB_ROW15, SYS, KBC, INVALID, SDIO2, INVALID, RSVD, INPUT, 0x32f8), + PINGROUP(KB_COL0, SYS, KBC, INVALID, TRACE, INVALID, RSVD, INPUT, 0x32fc), + PINGROUP(KB_COL1, SYS, KBC, INVALID, TRACE, INVALID, RSVD, INPUT, 0x3300), + PINGROUP(KB_COL2, SYS, KBC, INVALID, TRACE, RSVD, RSVD, INPUT, 0x3304), + PINGROUP(KB_COL3, SYS, KBC, INVALID, TRACE, RSVD, RSVD, INPUT, 0x3308), + PINGROUP(KB_COL4, SYS, KBC, INVALID, TRACE, RSVD, RSVD, INPUT, 0x330c), + PINGROUP(KB_COL5, SYS, KBC, INVALID, TRACE, RSVD, RSVD, INPUT, 0x3310), + PINGROUP(KB_COL6, SYS, KBC, INVALID, TRACE, INVALID, RSVD, INPUT, 0x3314), + PINGROUP(KB_COL7, SYS, KBC, INVALID, TRACE, INVALID, RSVD, INPUT, 0x3318), + PINGROUP(CLK_32K_OUT, SYS, BLINK, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x331c), + PINGROUP(SYS_CLK_REQ, SYS, SYSCLK, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x3320), + PINGROUP(CORE_PWR_REQ, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, INPUT, 0x3324), + PINGROUP(CPU_PWR_REQ, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, INPUT, 0x3328), + PINGROUP(PWR_INT_N, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, INPUT, 0x332c), + PINGROUP(CLK_32K_IN, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, INPUT, 0x3330), + PINGROUP(OWR, SYS, OWR, RSVD, RSVD, RSVD, RSVD, INPUT, 0x3334), + PINGROUP(DAP1_FS, AUDIO, I2S0, HDA, GMI, SDIO2, RSVD, INPUT, 0x3338), + PINGROUP(DAP1_DIN, AUDIO, I2S0, HDA, GMI, SDIO2, RSVD, INPUT, 0x333c), + PINGROUP(DAP1_DOUT, AUDIO, I2S0, HDA, GMI, SDIO2, RSVD, INPUT, 0x3340), + PINGROUP(DAP1_SCLK, AUDIO, I2S0, HDA, GMI, SDIO2, RSVD, INPUT, 0x3344), + PINGROUP(CLK1_REQ, AUDIO, DAP, HDA, RSVD2, RSVD3, RSVD, INPUT, 0x3348), + PINGROUP(CLK1_OUT, AUDIO, EXTPERIPH1, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x334c), + PINGROUP(SPDIF_IN, AUDIO, SPDIF, HDA, INVALID, DAPSDMMC2, RSVD, INPUT, 0x3350), + PINGROUP(SPDIF_OUT, AUDIO, SPDIF, RSVD1, INVALID, DAPSDMMC2, RSVD, INPUT, 0x3354), + PINGROUP(DAP2_FS, AUDIO, I2S1, HDA, RSVD2, GMI, RSVD, INPUT, 0x3358), + PINGROUP(DAP2_DIN, AUDIO, I2S1, HDA, RSVD2, GMI, RSVD, INPUT, 0x335c), + PINGROUP(DAP2_DOUT, AUDIO, I2S1, HDA, RSVD2, GMI, RSVD, INPUT, 0x3360), + PINGROUP(DAP2_SCLK, AUDIO, I2S1, HDA, RSVD2, GMI, RSVD, INPUT, 0x3364), + PINGROUP(SPI2_MOSI, AUDIO, SPI6, SPI2, INVALID, GMI, RSVD, INPUT, 0x3368), + PINGROUP(SPI2_MISO, AUDIO, SPI6, SPI2, INVALID, GMI, RSVD, INPUT, 0x336c), + PINGROUP(SPI2_CS0_N, AUDIO, SPI6, SPI2, INVALID, GMI, RSVD, INPUT, 0x3370), + PINGROUP(SPI2_SCK, AUDIO, SPI6, SPI2, INVALID, GMI, RSVD, INPUT, 0x3374), + PINGROUP(SPI1_MOSI, AUDIO, SPI2, SPI1, INVALID, GMI, RSVD, INPUT, 0x3378), + PINGROUP(SPI1_SCK, AUDIO, SPI2, SPI1, INVALID, GMI, RSVD, INPUT, 0x337c), + PINGROUP(SPI1_CS0_N, AUDIO, SPI2, SPI1, INVALID, GMI, RSVD, INPUT, 0x3380), + PINGROUP(SPI1_MISO, AUDIO, INVALID, SPI1, INVALID, RSVD3, RSVD, INPUT, 0x3384), + PINGROUP(SPI2_CS1_N, AUDIO, INVALID, SPI2, INVALID, INVALID, RSVD, INPUT, 0x3388), + PINGROUP(SPI2_CS2_N, AUDIO, INVALID, SPI2, INVALID, INVALID, RSVD, INPUT, 0x338c), + PINGROUP(SDMMC3_CLK, SDMMC3, UARTA, PWM2, SDIO3, INVALID, RSVD, INPUT, 0x3390), + PINGROUP(SDMMC3_CMD, SDMMC3, UARTA, PWM3, SDIO3, INVALID, RSVD, INPUT, 0x3394), + PINGROUP(SDMMC3_DAT0, SDMMC3, RSVD, RSVD1, SDIO3, INVALID, RSVD, INPUT, 0x3398), + PINGROUP(SDMMC3_DAT1, SDMMC3, RSVD, RSVD1, SDIO3, INVALID, RSVD, INPUT, 0x339c), + PINGROUP(SDMMC3_DAT2, SDMMC3, RSVD, PWM1, SDIO3, INVALID, RSVD, INPUT, 0x33a0), + PINGROUP(SDMMC3_DAT3, SDMMC3, RSVD, PWM0, SDIO3, INVALID, RSVD, INPUT, 0x33a4), + PINGROUP(SDMMC3_DAT4, SDMMC3, PWM1, INVALID, SDIO3, INVALID, RSVD, INPUT, 0x33a8), + PINGROUP(SDMMC3_DAT5, SDMMC3, PWM0, INVALID, SDIO3, INVALID, RSVD, INPUT, 0x33ac), + PINGROUP(SDMMC3_DAT6, SDMMC3, SPDIF, INVALID, SDIO3, INVALID, RSVD, INPUT, 0x33b0), + PINGROUP(SDMMC3_DAT7, SDMMC3, SPDIF, INVALID, SDIO3, INVALID, RSVD, INPUT, 0x33b4), + PINGROUP(PEX_L0_PRSNT_N, PEXCTL, PCIE, HDA, RSVD2, RSVD3, RSVD, INPUT, 0x33b8), + PINGROUP(PEX_L0_RST_N, PEXCTL, PCIE, HDA, RSVD2, RSVD3, RSVD, INPUT, 0x33bc), + PINGROUP(PEX_L0_CLKREQ_N, PEXCTL, PCIE, HDA, RSVD2, RSVD3, RSVD, INPUT, 0x33c0), + PINGROUP(PEX_WAKE_N, PEXCTL, PCIE, HDA, RSVD2, RSVD3, RSVD, INPUT, 0x33c4), + PINGROUP(PEX_L1_PRSNT_N, PEXCTL, PCIE, HDA, RSVD2, RSVD3, RSVD, INPUT, 0x33c8), + PINGROUP(PEX_L1_RST_N, PEXCTL, PCIE, HDA, RSVD2, RSVD3, RSVD, INPUT, 0x33cc), + PINGROUP(PEX_L1_CLKREQ_N, PEXCTL, PCIE, HDA, RSVD2, RSVD3, RSVD, INPUT, 0x33d0), + PINGROUP(PEX_L2_PRSNT_N, PEXCTL, PCIE, HDA, RSVD2, RSVD3, RSVD, INPUT, 0x33d4), + PINGROUP(PEX_L2_RST_N, PEXCTL, PCIE, HDA, RSVD2, RSVD3, RSVD, INPUT, 0x33d8), + PINGROUP(PEX_L2_CLKREQ_N, PEXCTL, PCIE, HDA, RSVD2, RSVD3, RSVD, INPUT, 0x33dc), + PINGROUP(HDMI_CEC, SYS, CEC, RSVD1, RSVD2, RSVD3, RSVD, INPUT, 0x33e0), +}; + +void __devinit tegra30_pinmux_init(const struct tegra_pingroup_desc **pg, + int *pg_max, const struct tegra_drive_pingroup_desc **pgdrive, + int *pgdrive_max) +{ + *pg = tegra_soc_pingroups; + *pg_max = TEGRA_MAX_PINGROUP; + *pgdrive = tegra_soc_drive_pingroups; + *pgdrive_max = TEGRA_MAX_DRIVE_PINGROUP; +} + diff --git a/arch/arm/mach-tegra/pinmux.c b/arch/arm/mach-tegra/pinmux.c index 1d201650d7a4..ac35d2b76850 100644 --- a/arch/arm/mach-tegra/pinmux.c +++ b/arch/arm/mach-tegra/pinmux.c @@ -21,6 +21,7 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/of_device.h> #include <mach/iomap.h> #include <mach/pinmux.h> @@ -33,8 +34,10 @@ #define SLWR(reg) (((reg) >> 28) & 0x3) #define SLWF(reg) (((reg) >> 30) & 0x3) -static const struct tegra_pingroup_desc *const pingroups = tegra_soc_pingroups; -static const struct tegra_drive_pingroup_desc *const drive_pingroups = tegra_soc_drive_pingroups; +static const struct tegra_pingroup_desc *pingroups; +static const struct tegra_drive_pingroup_desc *drive_pingroups; +static int pingroup_max; +static int drive_max; static char *tegra_mux_names[TEGRA_MAX_MUX] = { [TEGRA_MUX_AHB_CLK] = "AHB_CLK", @@ -97,6 +100,49 @@ static char *tegra_mux_names[TEGRA_MAX_MUX] = { [TEGRA_MUX_VI] = "VI", [TEGRA_MUX_VI_SENSOR_CLK] = "VI_SENSOR_CLK", [TEGRA_MUX_XIO] = "XIO", + [TEGRA_MUX_BLINK] = "BLINK", + [TEGRA_MUX_CEC] = "CEC", + [TEGRA_MUX_CLK12] = "CLK12", + [TEGRA_MUX_DAP] = "DAP", + [TEGRA_MUX_DAPSDMMC2] = "DAPSDMMC2", + [TEGRA_MUX_DDR] = "DDR", + [TEGRA_MUX_DEV3] = "DEV3", + [TEGRA_MUX_DTV] = "DTV", + [TEGRA_MUX_VI_ALT1] = "VI_ALT1", + [TEGRA_MUX_VI_ALT2] = "VI_ALT2", + [TEGRA_MUX_VI_ALT3] = "VI_ALT3", + [TEGRA_MUX_EMC_DLL] = "EMC_DLL", + [TEGRA_MUX_EXTPERIPH1] = "EXTPERIPH1", + [TEGRA_MUX_EXTPERIPH2] = "EXTPERIPH2", + [TEGRA_MUX_EXTPERIPH3] = "EXTPERIPH3", + [TEGRA_MUX_GMI_ALT] = "GMI_ALT", + [TEGRA_MUX_HDA] = "HDA", + [TEGRA_MUX_HSI] = "HSI", + [TEGRA_MUX_I2C4] = "I2C4", + [TEGRA_MUX_I2C5] = "I2C5", + [TEGRA_MUX_I2CPWR] = "I2CPWR", + [TEGRA_MUX_I2S0] = "I2S0", + [TEGRA_MUX_I2S1] = "I2S1", + [TEGRA_MUX_I2S2] = "I2S2", + [TEGRA_MUX_I2S3] = "I2S3", + [TEGRA_MUX_I2S4] = "I2S4", + [TEGRA_MUX_NAND_ALT] = "NAND_ALT", + [TEGRA_MUX_POPSDIO4] = "POPSDIO4", + [TEGRA_MUX_POPSDMMC4] = "POPSDMMC4", + [TEGRA_MUX_PWM0] = "PWM0", + [TEGRA_MUX_PWM1] = "PWM2", + [TEGRA_MUX_PWM2] = "PWM2", + [TEGRA_MUX_PWM3] = "PWM3", + [TEGRA_MUX_SATA] = "SATA", + [TEGRA_MUX_SPI5] = "SPI5", + [TEGRA_MUX_SPI6] = "SPI6", + [TEGRA_MUX_SYSCLK] = "SYSCLK", + [TEGRA_MUX_VGP1] = "VGP1", + [TEGRA_MUX_VGP2] = "VGP2", + [TEGRA_MUX_VGP3] = "VGP3", + [TEGRA_MUX_VGP4] = "VGP4", + [TEGRA_MUX_VGP5] = "VGP5", + [TEGRA_MUX_VGP6] = "VGP6", [TEGRA_MUX_SAFE] = "<safe>", }; @@ -116,9 +162,9 @@ static const char *tegra_slew_names[TEGRA_MAX_SLEW] = { static DEFINE_SPINLOCK(mux_lock); -static const char *pingroup_name(enum tegra_pingroup pg) +static const char *pingroup_name(int pg) { - if (pg < 0 || pg >= TEGRA_MAX_PINGROUP) + if (pg < 0 || pg >= pingroup_max) return "<UNKNOWN>"; return pingroups[pg].name; @@ -189,10 +235,10 @@ static int tegra_pinmux_set_func(const struct tegra_pingroup_config *config) int i; unsigned long reg; unsigned long flags; - enum tegra_pingroup pg = config->pingroup; + int pg = config->pingroup; enum tegra_mux_func func = config->func; - if (pg < 0 || pg >= TEGRA_MAX_PINGROUP) + if (pg < 0 || pg >= pingroup_max) return -ERANGE; if (pingroups[pg].mux_reg < 0) @@ -230,13 +276,12 @@ static int tegra_pinmux_set_func(const struct tegra_pingroup_config *config) return 0; } -int tegra_pinmux_set_tristate(enum tegra_pingroup pg, - enum tegra_tristate tristate) +int tegra_pinmux_set_tristate(int pg, enum tegra_tristate tristate) { unsigned long reg; unsigned long flags; - if (pg < 0 || pg >= TEGRA_MAX_PINGROUP) + if (pg < 0 || pg >= pingroup_max) return -ERANGE; if (pingroups[pg].tri_reg < 0) @@ -255,13 +300,12 @@ int tegra_pinmux_set_tristate(enum tegra_pingroup pg, return 0; } -int tegra_pinmux_set_pullupdown(enum tegra_pingroup pg, - enum tegra_pullupdown pupd) +int tegra_pinmux_set_pullupdown(int pg, enum tegra_pullupdown pupd) { unsigned long reg; unsigned long flags; - if (pg < 0 || pg >= TEGRA_MAX_PINGROUP) + if (pg < 0 || pg >= pingroup_max) return -ERANGE; if (pingroups[pg].pupd_reg < 0) @@ -287,7 +331,7 @@ int tegra_pinmux_set_pullupdown(enum tegra_pingroup pg, static void tegra_pinmux_config_pingroup(const struct tegra_pingroup_config *config) { - enum tegra_pingroup pingroup = config->pingroup; + int pingroup = config->pingroup; enum tegra_mux_func func = config->func; enum tegra_pullupdown pupd = config->pupd; enum tegra_tristate tristate = config->tristate; @@ -323,9 +367,9 @@ void tegra_pinmux_config_table(const struct tegra_pingroup_config *config, int l tegra_pinmux_config_pingroup(&config[i]); } -static const char *drive_pinmux_name(enum tegra_drive_pingroup pg) +static const char *drive_pinmux_name(int pg) { - if (pg < 0 || pg >= TEGRA_MAX_DRIVE_PINGROUP) + if (pg < 0 || pg >= drive_max) return "<UNKNOWN>"; return drive_pingroups[pg].name; @@ -352,12 +396,11 @@ static const char *slew_name(unsigned long val) return tegra_slew_names[val]; } -static int tegra_drive_pinmux_set_hsm(enum tegra_drive_pingroup pg, - enum tegra_hsm hsm) +static int tegra_drive_pinmux_set_hsm(int pg, enum tegra_hsm hsm) { unsigned long flags; u32 reg; - if (pg < 0 || pg >= TEGRA_MAX_DRIVE_PINGROUP) + if (pg < 0 || pg >= drive_max) return -ERANGE; if (hsm != TEGRA_HSM_ENABLE && hsm != TEGRA_HSM_DISABLE) @@ -377,12 +420,11 @@ static int tegra_drive_pinmux_set_hsm(enum tegra_drive_pingroup pg, return 0; } -static int tegra_drive_pinmux_set_schmitt(enum tegra_drive_pingroup pg, - enum tegra_schmitt schmitt) +static int tegra_drive_pinmux_set_schmitt(int pg, enum tegra_schmitt schmitt) { unsigned long flags; u32 reg; - if (pg < 0 || pg >= TEGRA_MAX_DRIVE_PINGROUP) + if (pg < 0 || pg >= drive_max) return -ERANGE; if (schmitt != TEGRA_SCHMITT_ENABLE && schmitt != TEGRA_SCHMITT_DISABLE) @@ -402,12 +444,11 @@ static int tegra_drive_pinmux_set_schmitt(enum tegra_drive_pingroup pg, return 0; } -static int tegra_drive_pinmux_set_drive(enum tegra_drive_pingroup pg, - enum tegra_drive drive) +static int tegra_drive_pinmux_set_drive(int pg, enum tegra_drive drive) { unsigned long flags; u32 reg; - if (pg < 0 || pg >= TEGRA_MAX_DRIVE_PINGROUP) + if (pg < 0 || pg >= drive_max) return -ERANGE; if (drive < 0 || drive >= TEGRA_MAX_DRIVE) @@ -425,12 +466,12 @@ static int tegra_drive_pinmux_set_drive(enum tegra_drive_pingroup pg, return 0; } -static int tegra_drive_pinmux_set_pull_down(enum tegra_drive_pingroup pg, +static int tegra_drive_pinmux_set_pull_down(int pg, enum tegra_pull_strength pull_down) { unsigned long flags; u32 reg; - if (pg < 0 || pg >= TEGRA_MAX_DRIVE_PINGROUP) + if (pg < 0 || pg >= drive_max) return -ERANGE; if (pull_down < 0 || pull_down >= TEGRA_MAX_PULL) @@ -448,12 +489,12 @@ static int tegra_drive_pinmux_set_pull_down(enum tegra_drive_pingroup pg, return 0; } -static int tegra_drive_pinmux_set_pull_up(enum tegra_drive_pingroup pg, +static int tegra_drive_pinmux_set_pull_up(int pg, enum tegra_pull_strength pull_up) { unsigned long flags; u32 reg; - if (pg < 0 || pg >= TEGRA_MAX_DRIVE_PINGROUP) + if (pg < 0 || pg >= drive_max) return -ERANGE; if (pull_up < 0 || pull_up >= TEGRA_MAX_PULL) @@ -471,12 +512,12 @@ static int tegra_drive_pinmux_set_pull_up(enum tegra_drive_pingroup pg, return 0; } -static int tegra_drive_pinmux_set_slew_rising(enum tegra_drive_pingroup pg, +static int tegra_drive_pinmux_set_slew_rising(int pg, enum tegra_slew slew_rising) { unsigned long flags; u32 reg; - if (pg < 0 || pg >= TEGRA_MAX_DRIVE_PINGROUP) + if (pg < 0 || pg >= drive_max) return -ERANGE; if (slew_rising < 0 || slew_rising >= TEGRA_MAX_SLEW) @@ -494,12 +535,12 @@ static int tegra_drive_pinmux_set_slew_rising(enum tegra_drive_pingroup pg, return 0; } -static int tegra_drive_pinmux_set_slew_falling(enum tegra_drive_pingroup pg, +static int tegra_drive_pinmux_set_slew_falling(int pg, enum tegra_slew slew_falling) { unsigned long flags; u32 reg; - if (pg < 0 || pg >= TEGRA_MAX_DRIVE_PINGROUP) + if (pg < 0 || pg >= drive_max) return -ERANGE; if (slew_falling < 0 || slew_falling >= TEGRA_MAX_SLEW) @@ -517,7 +558,7 @@ static int tegra_drive_pinmux_set_slew_falling(enum tegra_drive_pingroup pg, return 0; } -static void tegra_drive_pinmux_config_pingroup(enum tegra_drive_pingroup pingroup, +static void tegra_drive_pinmux_config_pingroup(int pingroup, enum tegra_hsm hsm, enum tegra_schmitt schmitt, enum tegra_drive drive, @@ -596,7 +637,7 @@ void tegra_pinmux_set_safe_pinmux_table(const struct tegra_pingroup_config *conf for (i = 0; i < len; i++) { int err; c = config[i]; - if (c.pingroup < 0 || c.pingroup >= TEGRA_MAX_PINGROUP) { + if (c.pingroup < 0 || c.pingroup >= pingroup_max) { WARN_ON(1); continue; } @@ -617,7 +658,7 @@ void tegra_pinmux_config_pinmux_table(const struct tegra_pingroup_config *config for (i = 0; i < len; i++) { int err; if (config[i].pingroup < 0 || - config[i].pingroup >= TEGRA_MAX_PINGROUP) { + config[i].pingroup >= pingroup_max) { WARN_ON(1); continue; } @@ -635,7 +676,7 @@ void tegra_pinmux_config_tristate_table(const struct tegra_pingroup_config *conf { int i; int err; - enum tegra_pingroup pingroup; + int pingroup; for (i = 0; i < len; i++) { pingroup = config[i].pingroup; @@ -654,7 +695,7 @@ void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *co { int i; int err; - enum tegra_pingroup pingroup; + int pingroup; for (i = 0; i < len; i++) { pingroup = config[i].pingroup; @@ -668,11 +709,36 @@ void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *co } } +static struct of_device_id tegra_pinmux_of_match[] __devinitdata = { +#ifdef CONFIG_ARCH_TEGRA_2x_SOC + { .compatible = "nvidia,tegra20-pinmux", tegra20_pinmux_init }, +#endif +#ifdef CONFIG_ARCH_TEGRA_3x_SOC + { .compatible = "nvidia,tegra30-pinmux", tegra30_pinmux_init }, +#endif + { }, +}; + static int __devinit tegra_pinmux_probe(struct platform_device *pdev) { struct resource *res; int i; int config_bad = 0; + const struct of_device_id *match; + + match = of_match_device(tegra_pinmux_of_match, &pdev->dev); + + if (match) + ((pinmux_init)(match->data))(&pingroups, &pingroup_max, + &drive_pingroups, &drive_max); +#ifdef CONFIG_ARCH_TEGRA_2x_SOC + else + /* no device tree available, so we must be on tegra20 */ + tegra20_pinmux_init(&pingroups, &pingroup_max, + &drive_pingroups, &drive_max); +#else + pr_warn("non Tegra20 platform requires pinmux devicetree node\n"); +#endif for (i = 0; ; i++) { res = platform_get_resource(pdev, IORESOURCE_MEM, i); @@ -681,7 +747,7 @@ static int __devinit tegra_pinmux_probe(struct platform_device *pdev) } nbanks = i; - for (i = 0; i < TEGRA_MAX_PINGROUP; i++) { + for (i = 0; i < pingroup_max; i++) { if (pingroups[i].tri_bank >= nbanks) { dev_err(&pdev->dev, "pingroup %d: bad tri_bank\n", i); config_bad = 1; @@ -698,7 +764,7 @@ static int __devinit tegra_pinmux_probe(struct platform_device *pdev) } } - for (i = 0; i < TEGRA_MAX_DRIVE_PINGROUP; i++) { + for (i = 0; i < drive_max; i++) { if (drive_pingroups[i].reg_bank >= nbanks) { dev_err(&pdev->dev, "drive pingroup %d: bad reg_bank\n", i); @@ -741,11 +807,6 @@ static int __devinit tegra_pinmux_probe(struct platform_device *pdev) return 0; } -static struct of_device_id tegra_pinmux_of_match[] __devinitdata = { - { .compatible = "nvidia,tegra20-pinmux", }, - { }, -}; - static struct platform_driver tegra_pinmux_driver = { .driver = { .name = "tegra-pinmux", @@ -779,7 +840,7 @@ static int dbg_pinmux_show(struct seq_file *s, void *unused) int i; int len; - for (i = 0; i < TEGRA_MAX_PINGROUP; i++) { + for (i = 0; i < pingroup_max; i++) { unsigned long reg; unsigned long tri; unsigned long mux; @@ -850,7 +911,7 @@ static int dbg_drive_pinmux_show(struct seq_file *s, void *unused) int i; int len; - for (i = 0; i < TEGRA_MAX_DRIVE_PINGROUP; i++) { + for (i = 0; i < drive_max; i++) { u32 reg; seq_printf(s, "\t{TEGRA_DRIVE_PINGROUP_%s", diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 371869d8ea01..ff9e6b6c0460 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -174,7 +174,7 @@ static int tegra_periph_clk_enable_refcount[3 * 32]; #define pmc_readl(reg) \ __raw_readl(reg_pmc_base + (reg)) -unsigned long clk_measure_input_freq(void) +static unsigned long clk_measure_input_freq(void) { u32 clock_autodetect; clk_writel(OSC_FREQ_DET_TRIG | 1, OSC_FREQ_DET); @@ -278,18 +278,6 @@ static struct clk_ops tegra_clk_m_ops = { .disable = tegra2_clk_m_disable, }; -void tegra2_periph_reset_assert(struct clk *c) -{ - BUG_ON(!c->ops->reset); - c->ops->reset(c, true); -} - -void tegra2_periph_reset_deassert(struct clk *c) -{ - BUG_ON(!c->ops->reset); - c->ops->reset(c, false); -} - /* super clock functions */ /* "super clocks" on tegra have two-stage muxes and a clock skipping * super divider. We will ignore the clock skipping divider, since we @@ -1132,6 +1120,9 @@ static struct clk_ops tegra_periph_clk_ops = { void tegra2_sdmmc_tap_delay(struct clk *c, int delay) { u32 reg; + unsigned long flags; + + spin_lock_irqsave(&c->spinlock, flags); delay = clamp(delay, 0, 15); reg = clk_readl(c->reg); @@ -1139,6 +1130,8 @@ void tegra2_sdmmc_tap_delay(struct clk *c, int delay) reg |= SDMMC_CLK_INT_FB_SEL; reg |= delay << SDMMC_CLK_INT_FB_DLY_SHIFT; clk_writel(reg, c->reg); + + spin_unlock_irqrestore(&c->spinlock, flags); } /* External memory controller clock ops */ diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c index e2272d263a83..1d1acda4f3e0 100644 --- a/arch/arm/mach-tegra/timer.c +++ b/arch/arm/mach-tegra/timer.c @@ -19,7 +19,6 @@ #include <linux/init.h> #include <linux/err.h> -#include <linux/sched.h> #include <linux/time.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -106,25 +105,9 @@ static struct clock_event_device tegra_clockevent = { .set_mode = tegra_timer_set_mode, }; -static DEFINE_CLOCK_DATA(cd); - -/* - * Constants generated by clocks_calc_mult_shift(m, s, 1MHz, NSEC_PER_SEC, 60). - * This gives a resolution of about 1us and a wrap period of about 1h11min. - */ -#define SC_MULT 4194304000u -#define SC_SHIFT 22 - -unsigned long long notrace sched_clock(void) +static u32 notrace tegra_read_sched_clock(void) { - u32 cyc = timer_readl(TIMERUS_CNTR_1US); - return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT); -} - -static void notrace tegra_update_sched_clock(void) -{ - u32 cyc = timer_readl(TIMERUS_CNTR_1US); - update_sched_clock(&cd, cyc, (u32)~0); + return timer_readl(TIMERUS_CNTR_1US); } /* @@ -182,20 +165,28 @@ static struct irqaction tegra_timer_irq = { static void __init tegra_init_timer(void) { struct clk *clk; - unsigned long rate = clk_measure_input_freq(); + unsigned long rate; int ret; clk = clk_get_sys("timer", NULL); - BUG_ON(IS_ERR(clk)); - clk_enable(clk); + if (IS_ERR(clk)) { + pr_warn("Unable to get timer clock." + " Assuming 12Mhz input clock.\n"); + rate = 12000000; + } else { + clk_enable(clk); + rate = clk_get_rate(clk); + } /* * rtc registers are used by read_persistent_clock, keep the rtc clock * enabled */ clk = clk_get_sys("rtc-tegra", NULL); - BUG_ON(IS_ERR(clk)); - clk_enable(clk); + if (IS_ERR(clk)) + pr_warn("Unable to get rtc-tegra clock\n"); + else + clk_enable(clk); #ifdef CONFIG_HAVE_ARM_TWD twd_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x600); @@ -218,8 +209,7 @@ static void __init tegra_init_timer(void) WARN(1, "Unknown clock rate"); } - init_fixed_sched_clock(&cd, tegra_update_sched_clock, 32, - 1000000, SC_MULT, SC_SHIFT); + setup_sched_clock(tegra_read_sched_clock, 32, 1000000); if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US, "timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) { diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 1cbcd4fc1e17..54d8f34fdee5 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -7,8 +7,8 @@ comment "ST-Ericsson Mobile Platform Products" config MACH_U300 bool "U300" select PINCTRL - select PINMUX_U300 - select GPIO_U300 + select PINCTRL_U300 + select PINCTRL_COH901 comment "ST-Ericsson U300/U330/U335/U365 Feature Selections" diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index ac0791e924bc..b4c6926a700c 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -1605,15 +1605,15 @@ static struct platform_device pinmux_device = { }; /* Pinmux settings */ -static struct pinmux_map u300_pinmux_map[] = { +static struct pinmux_map __initdata u300_pinmux_map[] = { /* anonymous maps for chip power and EMIFs */ - PINMUX_MAP_PRIMARY_SYS_HOG("POWER", "power"), - PINMUX_MAP_PRIMARY_SYS_HOG("EMIF0", "emif0"), - PINMUX_MAP_PRIMARY_SYS_HOG("EMIF1", "emif1"), + PINMUX_MAP_SYS_HOG("POWER", "pinmux-u300", "power"), + PINMUX_MAP_SYS_HOG("EMIF0", "pinmux-u300", "emif0"), + PINMUX_MAP_SYS_HOG("EMIF1", "pinmux-u300", "emif1"), /* per-device maps for MMC/SD, SPI and UART */ - PINMUX_MAP_PRIMARY("MMCSD", "mmc0", "mmci"), - PINMUX_MAP_PRIMARY("SPI", "spi0", "pl022"), - PINMUX_MAP_PRIMARY("UART0", "uart0", "uart0"), + PINMUX_MAP("MMCSD", "pinmux-u300", "mmc0", "mmci"), + PINMUX_MAP("SPI", "pinmux-u300", "spi0", "pl022"), + PINMUX_MAP("UART0", "pinmux-u300", "uart0", "uart0"), }; struct u300_mux_hog { @@ -1888,3 +1888,23 @@ static int core_module_init(void) return mmc_init(&mmcsd_device); } module_init(core_module_init); + +/* Forward declare this function from the watchdog */ +void coh901327_watchdog_reset(void); + +void u300_restart(char mode, const char *cmd) +{ + switch (mode) { + case 's': + case 'h': +#ifdef CONFIG_COH901327_WATCHDOG + coh901327_watchdog_reset(); +#endif + break; + default: + /* Do nothing */ + break; + } + /* Wait for system do die/reset. */ + while (1); +} diff --git a/arch/arm/mach-u300/include/mach/entry-macro.S b/arch/arm/mach-u300/include/mach/entry-macro.S index 20731ae39d38..7181d6ac6651 100644 --- a/arch/arm/mach-u300/include/mach/entry-macro.S +++ b/arch/arm/mach-u300/include/mach/entry-macro.S @@ -8,33 +8,9 @@ * Low-level IRQ helper macros for ST-Ericsson U300 * Author: Linus Walleij <linus.walleij@stericsson.com> */ -#include <mach/hardware.h> -#include <asm/hardware/vic.h> .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON0_BASE - ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status - mov \irqnr, #0 - teq \irqstat, #0 - bne 1002f -1001: ldr \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON1_BASE - ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status - mov \irqnr, #32 - teq \irqstat, #0 - beq 1003f -1002: tst \irqstat, #1 - bne 1003f - add \irqnr, \irqnr, #1 - movs \irqstat, \irqstat, lsr #1 - bne 1002b -1003: /* EQ will be set if no irqs pending */ - .endm diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/arch/arm/mach-u300/include/mach/gpio-u300.h index 0c2b2021951a..bf4c7935aecd 100644 --- a/arch/arm/mach-u300/include/mach/gpio-u300.h +++ b/arch/arm/mach-u300/include/mach/gpio-u300.h @@ -9,121 +9,6 @@ #ifndef __MACH_U300_GPIO_U300_H #define __MACH_U300_GPIO_U300_H -/* - * Individual pin assignments for the B26/S26. Notice that the - * actual usage of these pins depends on the PAD MUX settings, that - * is why the same number can potentially appear several times. - * In the reference design each pin is only used for one purpose. - * These were determined by inspecting the B26/S26 schematic: - * 2/1911-ROA 128 1603 - */ -#ifdef CONFIG_MACH_U300_BS2X -#define U300_GPIO_PIN_UART_RX 0 -#define U300_GPIO_PIN_UART_TX 1 -#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */ -#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */ -#define U300_GPIO_PIN_CAM_SLEEP 4 -#define U300_GPIO_PIN_CAM_REG_EN 5 -#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */ -#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */ -#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */ -#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */ -#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ -#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ -#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */ -#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */ -#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */ -#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */ -#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */ -#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */ -#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ -#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ -#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ -#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ -#endif - -/* - * Individual pin assignments for the B330/S330 and B365/S365. - * Notice that the actual usage of these pins depends on the - * PAD MUX settings, that is why the same number can potentially - * appear several times. In the reference design each pin is only - * used for one purpose. These were determined by inspecting the - * S365 schematic. - */ -#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \ - defined(CONFIG_MACH_U300_BS335) -#define U300_GPIO_PIN_UART_RX 0 -#define U300_GPIO_PIN_UART_TX 1 -#define U300_GPIO_PIN_UART_CTS 2 -#define U300_GPIO_PIN_UART_RTS 3 -#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */ -#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */ -#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */ -#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */ - -#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */ -#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */ -#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */ -#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ -#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ -#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */ -#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */ -#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */ -#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */ -#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */ -#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */ -#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ -#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ -#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ -#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */ -#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */ -#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */ -#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */ -#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */ -#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */ -#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */ -#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */ -#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */ -#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */ -#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */ -#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */ -#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */ -#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ -#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ - -#ifdef CONFIG_MACH_U300_BS335 - -#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ -#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ -#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ -#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */ -#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */ -#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */ -#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */ -#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */ -#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */ -#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */ -#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */ -#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */ -#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ -#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ -#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ -#endif - -#endif - /** * enum u300_gpio_variant - the type of U300 GPIO employed */ diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index db3fbfa1d6e9..ee78a26707eb 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -110,7 +110,7 @@ #endif /* Maximum 8*7 GPIO lines */ -#ifdef CONFIG_GPIO_U300 +#ifdef CONFIG_PINCTRL_COH901 #define IRQ_U300_GPIO_BASE (U300_VIC_IRQS_END) #define IRQ_U300_GPIO_END (IRQ_U300_GPIO_BASE + 56) #else diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h deleted file mode 100644 index c808f347a081..000000000000 --- a/arch/arm/mach-u300/include/mach/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/memory.h - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Memory virtual/physical mapping constants. - * Author: Linus Walleij <linus.walleij@stericsson.com> - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> - */ - -#ifndef __MACH_MEMORY_H -#define __MACH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x48000000) -#define BOOT_PARAMS_OFFSET 0x100 - -#endif diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h index 77d9210a82e2..096333f32fc3 100644 --- a/arch/arm/mach-u300/include/mach/platform.h +++ b/arch/arm/mach-u300/include/mach/platform.h @@ -14,6 +14,7 @@ void u300_map_io(void); void u300_init_irq(void); void u300_init_devices(void); +void u300_restart(char, const char *); extern struct sys_timer u300_timer; #endif diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h index 8daf13634ce0..574d46e38290 100644 --- a/arch/arm/mach-u300/include/mach/system.h +++ b/arch/arm/mach-u300/include/mach/system.h @@ -8,35 +8,7 @@ * System shutdown and reset functions. * Author: Linus Walleij <linus.walleij@stericsson.com> */ -#include <mach/hardware.h> -#include <asm/io.h> -#include <asm/hardware/vic.h> -#include <asm/irq.h> - -/* Forward declare this function from the watchdog */ -void coh901327_watchdog_reset(void); - static inline void arch_idle(void) { cpu_do_idle(); } - -static void arch_reset(char mode, const char *cmd) -{ - switch (mode) { - case 's': - case 'h': - printk(KERN_CRIT "RESET: shutting down/rebooting system\n"); - /* Disable interrupts */ - local_irq_disable(); -#ifdef CONFIG_COH901327_WATCHDOG - coh901327_watchdog_reset(); -#endif - break; - default: - /* Do nothing */ - break; - } - /* Wait for system do die/reset. */ - while (1); -} diff --git a/arch/arm/mach-u300/include/mach/vmalloc.h b/arch/arm/mach-u300/include/mach/vmalloc.h deleted file mode 100644 index ec423b92b81d..000000000000 --- a/arch/arm/mach-u300/include/mach/vmalloc.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/vmalloc.h - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Virtual memory allocations - * End must be above the I/O registers and on an even 2MiB boundary. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#define VMALLOC_END 0xfe800000UL diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c index 4d482aacc272..05abd6ad9fab 100644 --- a/arch/arm/mach-u300/mmc.c +++ b/arch/arm/mach-u300/mmc.c @@ -18,8 +18,8 @@ #include <linux/slab.h> #include <mach/coh901318.h> #include <mach/dma_channels.h> -#include <mach/gpio-u300.h> +#include "u300-gpio.h" #include "mmc.h" static struct mmci_platform_data mmc0_plat_data = { diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index 5f51bdeef0ef..bc1c7897e82d 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -9,7 +9,6 @@ * Author: Linus Walleij <linus.walleij@stericsson.com> */ #include <linux/interrupt.h> -#include <linux/sched.h> #include <linux/time.h> #include <linux/timex.h> #include <linux/clockchips.h> @@ -337,18 +336,10 @@ static struct irqaction u300_timer_irq = { * this wraps around for now, since it is just a relative time * stamp. (Inspired by OMAP implementation.) */ -static DEFINE_CLOCK_DATA(cd); -unsigned long long notrace sched_clock(void) +static u32 notrace u300_read_sched_clock(void) { - u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC); - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -static void notrace u300_update_sched_clock(void) -{ - u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC); - update_sched_clock(&cd, cyc, (u32)~0); + return readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC); } @@ -366,7 +357,7 @@ static void __init u300_timer_init(void) clk_enable(clk); rate = clk_get_rate(clk); - init_sched_clock(&cd, u300_update_sched_clock, 32, rate); + setup_sched_clock(u300_read_sched_clock, 32, rate); /* * Disable the "OS" and "DD" timers - these are designed for Symbian! diff --git a/arch/arm/mach-u300/u300-gpio.h b/arch/arm/mach-u300/u300-gpio.h new file mode 100644 index 000000000000..847dc25300c6 --- /dev/null +++ b/arch/arm/mach-u300/u300-gpio.h @@ -0,0 +1,114 @@ +/* + * Individual pin assignments for the B26/S26. Notice that the + * actual usage of these pins depends on the PAD MUX settings, that + * is why the same number can potentially appear several times. + * In the reference design each pin is only used for one purpose. + * These were determined by inspecting the B26/S26 schematic: + * 2/1911-ROA 128 1603 + */ +#ifdef CONFIG_MACH_U300_BS2X +#define U300_GPIO_PIN_UART_RX 0 +#define U300_GPIO_PIN_UART_TX 1 +#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */ +#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */ +#define U300_GPIO_PIN_CAM_SLEEP 4 +#define U300_GPIO_PIN_CAM_REG_EN 5 +#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */ +#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */ +#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */ +#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */ +#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ +#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ +#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */ +#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */ +#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */ +#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */ +#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */ +#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */ +#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ +#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ +#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ +#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ +#endif + +/* + * Individual pin assignments for the B330/S330 and B365/S365. + * Notice that the actual usage of these pins depends on the + * PAD MUX settings, that is why the same number can potentially + * appear several times. In the reference design each pin is only + * used for one purpose. These were determined by inspecting the + * S365 schematic. + */ +#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \ + defined(CONFIG_MACH_U300_BS335) +#define U300_GPIO_PIN_UART_RX 0 +#define U300_GPIO_PIN_UART_TX 1 +#define U300_GPIO_PIN_UART_CTS 2 +#define U300_GPIO_PIN_UART_RTS 3 +#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */ +#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */ +#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */ +#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */ + +#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */ +#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */ +#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */ +#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ +#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ +#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */ +#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */ +#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */ +#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */ +#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */ +#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */ +#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ +#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ +#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ +#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */ +#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */ +#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */ +#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */ +#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */ +#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */ +#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */ +#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */ +#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */ +#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */ +#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */ +#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */ +#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */ +#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ +#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ + +#ifdef CONFIG_MACH_U300_BS335 + +#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ +#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ +#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ +#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */ +#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */ +#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */ +#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */ +#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */ +#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */ +#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */ +#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */ +#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */ +#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ +#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ +#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ +#endif + +#endif diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c index 89422ee7f3a8..f30c69d91d99 100644 --- a/arch/arm/mach-u300/u300.c +++ b/arch/arm/mach-u300/u300.c @@ -19,6 +19,7 @@ #include <linux/io.h> #include <mach/hardware.h> #include <mach/platform.h> +#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/memory.h> @@ -46,9 +47,11 @@ static void __init u300_init_machine(void) MACHINE_START(U300, MACH_U300_STRING) /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ - .atag_offset = BOOT_PARAMS_OFFSET, + .atag_offset = 0x100, .map_io = u300_map_io, .init_irq = u300_init_irq, + .handle_irq = vic_handle_irq, .timer = &u300_timer, .init_machine = u300_init_machine, + .restart = u300_restart, MACHINE_END diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 6826faeecc68..23be34b3bb6e 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -22,6 +22,12 @@ #include "ste-dma40-db8500.h" /* + * v2 has a new version of this block that need to be forced, the number found + * in hardware is incorrect + */ +#define U8500_SDI_V2_PERIPHID 0x10480180 + +/* * SDI 0 (MicroSD slot) */ @@ -117,10 +123,7 @@ static void sdi0_configure(void) gpio_direction_output(sdi0_en, 1); /* Add the device, force v2 to subrevision 1 */ - if (cpu_is_u8500v2()) - db8500_add_sdi0(&mop500_sdi0_data, 0x10480180); - else - db8500_add_sdi0(&mop500_sdi0_data, 0); + db8500_add_sdi0(&mop500_sdi0_data, U8500_SDI_V2_PERIPHID); } void mop500_sdi_tc35892_init(void) @@ -132,6 +135,42 @@ void mop500_sdi_tc35892_init(void) } /* + * SDI1 (SDIO WLAN) + */ +#ifdef CONFIG_STE_DMA40 +static struct stedma40_chan_cfg sdi1_dma_cfg_rx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB8500_DMA_DEV32_SD_MM1_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; + +static struct stedma40_chan_cfg sdi1_dma_cfg_tx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB8500_DMA_DEV32_SD_MM1_TX, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; +#endif + +static struct mmci_platform_data mop500_sdi1_data = { + .ocr_mask = MMC_VDD_29_30, + .f_max = 50000000, + .capabilities = MMC_CAP_4_BIT_DATA, + .gpio_cd = -1, + .gpio_wp = -1, +#ifdef CONFIG_STE_DMA40 + .dma_filter = stedma40_filter, + .dma_rx_param = &sdi1_dma_cfg_rx, + .dma_tx_param = &sdi1_dma_cfg_tx, +#endif +}; + +/* * SDI 2 (POP eMMC, not on DB8500ed) */ @@ -158,7 +197,8 @@ static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = { static struct mmci_platform_data mop500_sdi2_data = { .ocr_mask = MMC_VDD_165_195, .f_max = 50000000, - .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED, .gpio_cd = -1, .gpio_wp = -1, #ifdef CONFIG_STE_DMA40 @@ -208,20 +248,10 @@ static struct mmci_platform_data mop500_sdi4_data = { void __init mop500_sdi_init(void) { - u32 periphid = 0; - - /* v2 has a new version of this block that need to be forced */ - if (cpu_is_u8500v2()) - periphid = 0x10480180; - /* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */ - if (!cpu_is_u8500v10()) - mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; - - db8500_add_sdi2(&mop500_sdi2_data, periphid); - + /* PoP:ed eMMC */ + db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID); /* On-board eMMC */ - db8500_add_sdi4(&mop500_sdi4_data, periphid); - + db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID); /* * On boards with the TC35892 GPIO expander, sdi0 will finally * be added when the TC35892 initializes and calls @@ -231,13 +261,9 @@ void __init mop500_sdi_init(void) void __init snowball_sdi_init(void) { - u32 periphid = 0x10480180; - - mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; - /* On-board eMMC */ - db8500_add_sdi4(&mop500_sdi4_data, periphid); - + db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID); + /* External Micro SD slot */ mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; mop500_sdi0_data.cd_invert = true; sdi0_en = SNOWBALL_SDMMC_EN_GPIO; @@ -247,17 +273,15 @@ void __init snowball_sdi_init(void) void __init hrefv60_sdi_init(void) { - u32 periphid = 0x10480180; - - mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; - - db8500_add_sdi2(&mop500_sdi2_data, periphid); - + /* PoP:ed eMMC */ + db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID); /* On-board eMMC */ - db8500_add_sdi4(&mop500_sdi4_data, periphid); - + db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID); + /* External Micro SD slot */ mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; sdi0_en = HREFV60_SDMMC_EN_GPIO; sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; sdi0_configure(); + /* WLAN SDIO channel */ + db8500_add_sdi1(&mop500_sdi1_data, U8500_SDI_V2_PERIPHID); } diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index bdd7b80dd7ad..9361a5290177 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -33,6 +33,7 @@ #include <linux/leds.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/hardware/gic.h> #include <plat/i2c.h> #include <plat/ste_dma40.h> @@ -672,7 +673,7 @@ static void __init hrefv60_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_i2c_init(); - mop500_sdi_init(); + hrefv60_sdi_init(); mop500_spi_init(); mop500_uart_init(); @@ -695,6 +696,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform") .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ .timer = &ux500_timer, + .handle_irq = gic_handle_irq, .init_machine = mop500_init_machine, MACHINE_END @@ -703,6 +705,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") .map_io = u8500_map_io, .init_irq = ux500_init_irq, .timer = &ux500_timer, + .handle_irq = gic_handle_irq, .init_machine = hrefv60_init_machine, MACHINE_END @@ -712,5 +715,6 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ .timer = &ux500_timer, + .handle_irq = gic_handle_irq, .init_machine = snowball_init_machine, MACHINE_END diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index de18a2a23e6e..f926d3db6207 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -7,40 +7,77 @@ #ifndef __BOARD_MOP500_H #define __BOARD_MOP500_H -/* snowball GPIO for MMC card */ -#define SNOWBALL_SDMMC_EN_GPIO 217 -#define SNOWBALL_SDMMC_1V8_3V_GPIO 228 -#define SNOWBALL_SDMMC_CD_GPIO 218 +/* Snowball specific GPIO assignments, this board has no GPIO expander */ +#define SNOWBALL_ACCEL_INT1_GPIO 163 +#define SNOWBALL_ACCEL_INT2_GPIO 164 +#define SNOWBALL_MAGNET_DRDY_GPIO 165 +#define SNOWBALL_SDMMC_EN_GPIO 217 +#define SNOWBALL_SDMMC_1V8_3V_GPIO 228 +#define SNOWBALL_SDMMC_CD_GPIO 218 /* HREFv60-specific GPIO assignments, this board has no GPIO expander */ -#define HREFV60_TOUCH_RST_GPIO 143 -#define HREFV60_PROX_SENSE_GPIO 217 -#define HREFV60_HAL_SW_GPIO 145 -#define HREFV60_SDMMC_EN_GPIO 169 #define HREFV60_SDMMC_1V8_3V_GPIO 5 -#define HREFV60_SDMMC_CD_GPIO 95 -#define HREFV60_ACCEL_INT1_GPIO 82 -#define HREFV60_ACCEL_INT2_GPIO 83 +#define HREFV60_CAMERA_FLASH_ENABLE 21 #define HREFV60_MAGNET_DRDY_GPIO 32 #define HREFV60_DISP1_RST_GPIO 65 #define HREFV60_DISP2_RST_GPIO 66 +#define HREFV60_ACCEL_INT1_GPIO 82 +#define HREFV60_ACCEL_INT2_GPIO 83 +#define HREFV60_SDMMC_CD_GPIO 95 +#define HREFV60_XSHUTDOWN_SECONDARY_SENSOR 140 +#define HREFV60_TOUCH_RST_GPIO 143 +#define HREFV60_HAL_SW_GPIO 145 +#define HREFV60_SDMMC_EN_GPIO 169 +#define HREFV60_MMIO_XENON_CHARGE 170 +#define HREFV60_PROX_SENSE_GPIO 217 + +/* MOP500 generic GPIOs */ +#define CAMERA_FLASH_INT_PIN 7 +#define CYPRESS_TOUCH_INT_PIN 84 +#define XSHUTDOWN_PRIMARY_SENSOR 141 +#define XSHUTDOWN_SECONDARY_SENSOR 142 +#define CYPRESS_TOUCH_RST_GPIO 143 +#define MOP500_HDMI_RST_GPIO 196 +#define CYPRESS_SLAVE_SELECT_GPIO 216 /* GPIOs on the TC35892 expander */ #define MOP500_EGPIO(x) (NOMADIK_NR_GPIO + (x)) +#define GPIO_MAGNET_DRDY MOP500_EGPIO(1) #define GPIO_SDMMC_CD MOP500_EGPIO(3) +#define GPIO_CAMERA_FLASH_ENABLE MOP500_EGPIO(4) +#define GPIO_MMIO_XENON_CHARGE MOP500_EGPIO(5) #define GPIO_PROX_SENSOR MOP500_EGPIO(7) +#define GPIO_HAL_SENSOR MOP500_EGPIO(8) +#define GPIO_ACCEL_INT1 MOP500_EGPIO(10) +#define GPIO_ACCEL_INT2 MOP500_EGPIO(11) #define GPIO_BU21013_CS MOP500_EGPIO(13) +#define MOP500_DISP2_RST_GPIO MOP500_EGPIO(14) +#define MOP500_DISP1_RST_GPIO MOP500_EGPIO(15) #define GPIO_SDMMC_EN MOP500_EGPIO(17) #define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18) #define MOP500_EGPIO_END MOP500_EGPIO(24) -/* GPIOs on the AB8500 mixed-signals circuit */ -#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x)) +/* + * GPIOs on the AB8500 mixed-signals circuit + * Notice that we subtract 1 from the number passed into the macro, this is + * because the AB8500 GPIO pins are enumbered starting from 1, so the value in + * parens matches the GPIO pin number in the data sheet. + */ +#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x) - 1) +/*Snowball AB8500 GPIO */ +#define SNOWBALL_VSMPS2_1V8_GPIO MOP500_AB8500_PIN_GPIO(1) /* SYSCLKREQ2/GPIO1 */ +#define SNOWBALL_PM_GPIO1_GPIO MOP500_AB8500_PIN_GPIO(2) /* SYSCLKREQ3/GPIO2 */ +#define SNOWBALL_WLAN_CLK_REQ_GPIO MOP500_AB8500_PIN_GPIO(3) /* SYSCLKREQ4/GPIO3 */ +#define SNOWBALL_PM_GPIO4_GPIO MOP500_AB8500_PIN_GPIO(4) /* SYSCLKREQ6/GPIO4 */ +#define SNOWBALL_EN_3V6_GPIO MOP500_AB8500_PIN_GPIO(16) /* PWMOUT3/GPIO16 */ +#define SNOWBALL_PME_ETH_GPIO MOP500_AB8500_PIN_GPIO(24) /* SYSCLKREQ7/GPIO24 */ +#define SNOWBALL_EN_3V3_ETH_GPIO MOP500_AB8500_PIN_GPIO(26) /* GPIO26 */ struct i2c_board_info; extern void mop500_sdi_init(void); extern void snowball_sdi_init(void); +extern void hrefv60_sdi_init(void); extern void mop500_sdi_tc35892_init(void); void __init mop500_u8500uib_init(void); void __init mop500_stuib_init(void); diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c index 82025ba70c03..fe1569b67c91 100644 --- a/arch/arm/mach-ux500/board-u5500.c +++ b/arch/arm/mach-ux500/board-u5500.c @@ -12,6 +12,7 @@ #include <linux/i2c.h> #include <linux/mfd/ab5500/ab5500.h> +#include <asm/hardware/gic.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -149,5 +150,6 @@ MACHINE_START(U5500, "ST-Ericsson U5500 Platform") .map_io = u5500_map_io, .init_irq = ux500_init_irq, .timer = &ux500_timer, + .handle_irq = gic_handle_irq, .init_machine = u5500_init_machine, MACHINE_END diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index e832664d1bd9..737907537004 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -239,23 +239,6 @@ static void clk_prcmu_disable(struct clk *clk) writel(1 << clk->prcmu_cg_bit, cg_clr_reg); } -/* ED doesn't have the combined set/clr registers */ -static void clk_prcmu_ed_enable(struct clk *clk) -{ - void __iomem *addr = __io_address(U8500_PRCMU_BASE) - + clk->prcmu_cg_mgt; - - writel(readl(addr) | PRCM_MGT_ENABLE, addr); -} - -static void clk_prcmu_ed_disable(struct clk *clk) -{ - void __iomem *addr = __io_address(U8500_PRCMU_BASE) - + clk->prcmu_cg_mgt; - - writel(readl(addr) & ~PRCM_MGT_ENABLE, addr); -} - static struct clkops clk_prcmu_ops = { .enable = clk_prcmu_enable, .disable = clk_prcmu_disable, @@ -267,7 +250,6 @@ static unsigned int clkrst_base[] = { [3] = U8500_CLKRST3_BASE, [5] = U8500_CLKRST5_BASE, [6] = U8500_CLKRST6_BASE, - [7] = U8500_CLKRST7_BASE_ED, }; static void clk_prcc_enable(struct clk *clk) @@ -321,7 +303,6 @@ static DEFINE_PRCMU_CLK(per2clk, 0x0, 12, PER2CLK); static DEFINE_PRCMU_CLK(per3clk, 0x0, 13, PER3CLK); static DEFINE_PRCMU_CLK(per5clk, 0x0, 14, PER5CLK); static DEFINE_PRCMU_CLK_RATE(per6clk, 0x0, 15, PER6CLK, 133330000); -static DEFINE_PRCMU_CLK_RATE(per7clk, 0x0, 16, PER7CLK, 100000000); static DEFINE_PRCMU_CLK(lcdclk, 0x0, 17, LCDCLK); static DEFINE_PRCMU_CLK(bmlclk, 0x0, 18, BMLCLK); static DEFINE_PRCMU_CLK(hsitxclk, 0x0, 19, HSITXCLK); @@ -351,44 +332,28 @@ static DEFINE_PRCMU_CLK(uiccclk, 0x4, 1, UICCCLK); /* v1 */ static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk); static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL); static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk); -static DEFINE_PRCC_CLK(1, spi3_ed, 7, 7, NULL); -static DEFINE_PRCC_CLK(1, spi3_v1, 7, -1, NULL); +static DEFINE_PRCC_CLK(1, spi3, 7, -1, NULL); static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk); static DEFINE_PRCC_CLK(1, sdi0, 5, 5, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(1, msp1_ed, 4, 4, &clk_msp02clk); -static DEFINE_PRCC_CLK(1, msp1_v1, 4, 4, &clk_msp1clk); +static DEFINE_PRCC_CLK(1, msp1, 4, 4, &clk_msp1clk); static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk); static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk); static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk); static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk); /* Peripheral Cluster #2 */ - -static DEFINE_PRCC_CLK(2, gpio1_ed, 12, -1, NULL); -static DEFINE_PRCC_CLK(2, ssitx_ed, 11, -1, NULL); -static DEFINE_PRCC_CLK(2, ssirx_ed, 10, -1, NULL); -static DEFINE_PRCC_CLK(2, spi0_ed, 9, -1, NULL); -static DEFINE_PRCC_CLK(2, sdi3_ed, 8, 6, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(2, sdi1_ed, 7, 5, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(2, msp2_ed, 6, 4, &clk_msp02clk); -static DEFINE_PRCC_CLK(2, sdi4_ed, 4, 2, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(2, pwl_ed, 3, 1, NULL); -static DEFINE_PRCC_CLK(2, spi1_ed, 2, -1, NULL); -static DEFINE_PRCC_CLK(2, spi2_ed, 1, -1, NULL); -static DEFINE_PRCC_CLK(2, i2c3_ed, 0, 0, &clk_i2cclk); - -static DEFINE_PRCC_CLK(2, gpio1_v1, 11, -1, NULL); -static DEFINE_PRCC_CLK(2, ssitx_v1, 10, 7, NULL); -static DEFINE_PRCC_CLK(2, ssirx_v1, 9, 6, NULL); -static DEFINE_PRCC_CLK(2, spi0_v1, 8, -1, NULL); -static DEFINE_PRCC_CLK(2, sdi3_v1, 7, 5, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(2, sdi1_v1, 6, 4, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(2, msp2_v1, 5, 3, &clk_msp02clk); -static DEFINE_PRCC_CLK(2, sdi4_v1, 4, 2, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(2, pwl_v1, 3, 1, NULL); -static DEFINE_PRCC_CLK(2, spi1_v1, 2, -1, NULL); -static DEFINE_PRCC_CLK(2, spi2_v1, 1, -1, NULL); -static DEFINE_PRCC_CLK(2, i2c3_v1, 0, 0, &clk_i2cclk); +static DEFINE_PRCC_CLK(2, gpio1, 11, -1, NULL); +static DEFINE_PRCC_CLK(2, ssitx, 10, 7, NULL); +static DEFINE_PRCC_CLK(2, ssirx, 9, 6, NULL); +static DEFINE_PRCC_CLK(2, spi0, 8, -1, NULL); +static DEFINE_PRCC_CLK(2, sdi3, 7, 5, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, sdi1, 6, 4, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, msp2, 5, 3, &clk_msp02clk); +static DEFINE_PRCC_CLK(2, sdi4, 4, 2, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, pwl, 3, 1, NULL); +static DEFINE_PRCC_CLK(2, spi1, 2, -1, NULL); +static DEFINE_PRCC_CLK(2, spi2, 1, -1, NULL); +static DEFINE_PRCC_CLK(2, i2c3, 0, 0, &clk_i2cclk); /* Peripheral Cluster #3 */ static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL); @@ -397,49 +362,34 @@ static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk); static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz); static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk); static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk); -static DEFINE_PRCC_CLK(3, ssp1_ed, 2, 2, &clk_i2cclk); -static DEFINE_PRCC_CLK(3, ssp0_ed, 1, 1, &clk_i2cclk); -static DEFINE_PRCC_CLK(3, ssp1_v1, 2, 2, &clk_sspclk); -static DEFINE_PRCC_CLK(3, ssp0_v1, 1, 1, &clk_sspclk); +static DEFINE_PRCC_CLK(3, ssp1, 2, 2, &clk_sspclk); +static DEFINE_PRCC_CLK(3, ssp0, 1, 1, &clk_sspclk); static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL); /* Peripheral Cluster #4 is in the always on domain */ /* Peripheral Cluster #5 */ static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL); -static DEFINE_PRCC_CLK(5, usb_ed, 0, 0, &clk_i2cclk); -static DEFINE_PRCC_CLK(5, usb_v1, 0, 0, NULL); +static DEFINE_PRCC_CLK(5, usb, 0, 0, NULL); /* Peripheral Cluster #6 */ /* MTU ID in data */ -static DEFINE_PRCC_CLK_CUSTOM(6, mtu1_v1, 8, -1, NULL, clk_mtu_get_rate, 1); -static DEFINE_PRCC_CLK_CUSTOM(6, mtu0_v1, 7, -1, NULL, clk_mtu_get_rate, 0); -static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL); -static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL); +static DEFINE_PRCC_CLK_CUSTOM(6, mtu1, 8, -1, NULL, clk_mtu_get_rate, 1); +static DEFINE_PRCC_CLK_CUSTOM(6, mtu0, 7, -1, NULL, clk_mtu_get_rate, 0); +static DEFINE_PRCC_CLK(6, cfgreg, 6, 6, NULL); static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL); -static DEFINE_PRCC_CLK(6, unipro_v1, 4, 1, &clk_uniproclk); -static DEFINE_PRCC_CLK(6, cryp1_ed, 4, -1, NULL); +static DEFINE_PRCC_CLK(6, unipro, 4, 1, &clk_uniproclk); static DEFINE_PRCC_CLK(6, pka, 3, -1, NULL); static DEFINE_PRCC_CLK(6, hash0, 2, -1, NULL); static DEFINE_PRCC_CLK(6, cryp0, 1, -1, NULL); -static DEFINE_PRCC_CLK(6, rng_ed, 0, 0, &clk_i2cclk); -static DEFINE_PRCC_CLK(6, rng_v1, 0, 0, &clk_rngclk); - -/* Peripheral Cluster #7 */ - -static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL); -/* MTU ID in data */ -static DEFINE_PRCC_CLK_CUSTOM(7, mtu1_ed, 3, -1, NULL, clk_mtu_get_rate, 1); -static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0); -static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL); -static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL); +static DEFINE_PRCC_CLK(6, rng, 0, 0, &clk_rngclk); static struct clk clk_dummy_apb_pclk = { .name = "apb_pclk", }; -static struct clk_lookup u8500_common_clks[] = { +static struct clk_lookup u8500_clks[] = { CLK(dummy_apb_pclk, NULL, "apb_pclk"), /* Peripheral Cluster #1 */ @@ -494,83 +444,41 @@ static struct clk_lookup u8500_common_clks[] = { CLK(dmaclk, "dma40.0", NULL), CLK(b2r2clk, "b2r2", NULL), CLK(tvclk, "tv", NULL), -}; -static struct clk_lookup u8500_ed_clks[] = { - /* Peripheral Cluster #1 */ - CLK(spi3_ed, "spi3", NULL), - CLK(msp1_ed, "msp1", NULL), - - /* Peripheral Cluster #2 */ - CLK(gpio1_ed, "gpio.6", NULL), - CLK(gpio1_ed, "gpio.7", NULL), - CLK(ssitx_ed, "ssitx", NULL), - CLK(ssirx_ed, "ssirx", NULL), - CLK(spi0_ed, "spi0", NULL), - CLK(sdi3_ed, "sdi3", NULL), - CLK(sdi1_ed, "sdi1", NULL), - CLK(msp2_ed, "msp2", NULL), - CLK(sdi4_ed, "sdi4", NULL), - CLK(pwl_ed, "pwl", NULL), - CLK(spi1_ed, "spi1", NULL), - CLK(spi2_ed, "spi2", NULL), - CLK(i2c3_ed, "nmk-i2c.3", NULL), - - /* Peripheral Cluster #3 */ - CLK(ssp1_ed, "ssp1", NULL), - CLK(ssp0_ed, "ssp0", NULL), - - /* Peripheral Cluster #5 */ - CLK(usb_ed, "musb-ux500.0", "usb"), - - /* Peripheral Cluster #6 */ - CLK(dmc_ed, "dmc", NULL), - CLK(cryp1_ed, "cryp1", NULL), - CLK(rng_ed, "rng", NULL), - - /* Peripheral Cluster #7 */ - CLK(tzpc0_ed, "tzpc0", NULL), - CLK(mtu1_ed, "mtu1", NULL), - CLK(mtu0_ed, "mtu0", NULL), - CLK(wdg_ed, "wdg", NULL), - CLK(cfgreg_ed, "cfgreg", NULL), -}; - -static struct clk_lookup u8500_v1_clks[] = { /* Peripheral Cluster #1 */ CLK(i2c4, "nmk-i2c.4", NULL), - CLK(spi3_v1, "spi3", NULL), - CLK(msp1_v1, "msp1", NULL), + CLK(spi3, "spi3", NULL), + CLK(msp1, "msp1", NULL), /* Peripheral Cluster #2 */ - CLK(gpio1_v1, "gpio.6", NULL), - CLK(gpio1_v1, "gpio.7", NULL), - CLK(ssitx_v1, "ssitx", NULL), - CLK(ssirx_v1, "ssirx", NULL), - CLK(spi0_v1, "spi0", NULL), - CLK(sdi3_v1, "sdi3", NULL), - CLK(sdi1_v1, "sdi1", NULL), - CLK(msp2_v1, "msp2", NULL), - CLK(sdi4_v1, "sdi4", NULL), - CLK(pwl_v1, "pwl", NULL), - CLK(spi1_v1, "spi1", NULL), - CLK(spi2_v1, "spi2", NULL), - CLK(i2c3_v1, "nmk-i2c.3", NULL), + CLK(gpio1, "gpio.6", NULL), + CLK(gpio1, "gpio.7", NULL), + CLK(ssitx, "ssitx", NULL), + CLK(ssirx, "ssirx", NULL), + CLK(spi0, "spi0", NULL), + CLK(sdi3, "sdi3", NULL), + CLK(sdi1, "sdi1", NULL), + CLK(msp2, "msp2", NULL), + CLK(sdi4, "sdi4", NULL), + CLK(pwl, "pwl", NULL), + CLK(spi1, "spi1", NULL), + CLK(spi2, "spi2", NULL), + CLK(i2c3, "nmk-i2c.3", NULL), /* Peripheral Cluster #3 */ - CLK(ssp1_v1, "ssp1", NULL), - CLK(ssp0_v1, "ssp0", NULL), + CLK(ssp1, "ssp1", NULL), + CLK(ssp0, "ssp0", NULL), /* Peripheral Cluster #5 */ - CLK(usb_v1, "musb-ux500.0", "usb"), + CLK(usb, "musb-ux500.0", "usb"), /* Peripheral Cluster #6 */ - CLK(mtu1_v1, "mtu1", NULL), - CLK(mtu0_v1, "mtu0", NULL), - CLK(cfgreg_v1, "cfgreg", NULL), + CLK(mtu1, "mtu1", NULL), + CLK(mtu0, "mtu0", NULL), + CLK(cfgreg, "cfgreg", NULL), CLK(hash1, "hash1", NULL), - CLK(unipro_v1, "unipro", NULL), - CLK(rng_v1, "rng", NULL), + CLK(unipro, "unipro", NULL), + CLK(rng, "rng", NULL), /* PRCMU level clock gating */ @@ -743,7 +651,7 @@ err_out: late_initcall(clk_debugfs_init); #endif /* defined(CONFIG_DEBUG_FS) */ -unsigned long clk_smp_twd_rate = 400000000; +unsigned long clk_smp_twd_rate = 500000000; unsigned long clk_smp_twd_get_rate(struct clk *clk) { @@ -769,7 +677,7 @@ static int clk_twd_cpufreq_transition(struct notifier_block *nb, if (state == CPUFREQ_PRECHANGE) { /* Save frequency in simple Hz */ - clk_smp_twd_rate = f->new * 1000; + clk_smp_twd_rate = (f->new * 1000) / 2; } return NOTIFY_OK; @@ -790,11 +698,7 @@ late_initcall(clk_init_smp_twd_cpufreq); int __init clk_init(void) { - if (cpu_is_u8500ed()) { - clk_prcmu_ops.enable = clk_prcmu_ed_enable; - clk_prcmu_ops.disable = clk_prcmu_ed_disable; - clk_per6clk.rate = 100000000; - } else if (cpu_is_u5500()) { + if (cpu_is_u5500()) { /* Clock tree for U5500 not implemented yet */ clk_prcc_ops.enable = clk_prcc_ops.disable = NULL; clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL; @@ -802,20 +706,11 @@ int __init clk_init(void) clk_sdmmcclk.rate = 99900000; } - clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks)); - if (cpu_is_u8500ed()) - clkdev_add_table(u8500_ed_clks, ARRAY_SIZE(u8500_ed_clks)); - else - clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks)); - + clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks)); clkdev_add(&clk_smp_twd_lookup); #ifdef CONFIG_DEBUG_FS - clk_debugfs_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks)); - if (cpu_is_u8500ed()) - clk_debugfs_add_table(u8500_ed_clks, ARRAY_SIZE(u8500_ed_clks)); - else - clk_debugfs_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks)); + clk_debugfs_add_table(u8500_clks, ARRAY_SIZE(u8500_clks)); #endif return 0; } diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index 9de1af008094..18aa5c05c69e 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -30,12 +30,11 @@ static struct map_desc u5500_uart_io_desc[] __initdata = { }; static struct map_desc u5500_io_desc[] __initdata = { - __IO_DEV_DESC(U5500_GIC_CPU_BASE, SZ_4K), + /* SCU base also covers GIC CPU BASE and TWD with its 4K page */ + __IO_DEV_DESC(U5500_SCU_BASE, SZ_4K), __IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K), __IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K), - __IO_DEV_DESC(U5500_TWD_BASE, SZ_4K), __IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K), - __IO_DEV_DESC(U5500_SCU_BASE, SZ_4K), __IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K), __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K), @@ -47,26 +46,6 @@ static struct map_desc u5500_io_desc[] __initdata = { __IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K), }; -static struct resource db5500_pmu_resources[] = { - [0] = { - .start = IRQ_DB5500_PMU0, - .end = IRQ_DB5500_PMU0, - .flags = IORESOURCE_IRQ, - }, - [1] = { - .start = IRQ_DB5500_PMU1, - .end = IRQ_DB5500_PMU1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device db5500_pmu_device = { - .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, - .num_resources = ARRAY_SIZE(db5500_pmu_resources), - .resource = db5500_pmu_resources, -}; - static struct resource mbox0_resources[] = { { .name = "mbox_peer", @@ -152,7 +131,6 @@ static struct platform_device mbox2_device = { }; static struct platform_device *db5500_platform_devs[] __initdata = { - &db5500_pmu_device, &mbox0_device, &mbox1_device, &mbox2_device, @@ -193,6 +171,25 @@ void __init u5500_map_io(void) _PRCMU_BASE = __io_address(U5500_PRCMU_BASE); } +static void __init db5500_pmu_init(void) +{ + struct resource res[] = { + [0] = { + .start = IRQ_DB5500_PMU0, + .end = IRQ_DB5500_PMU0, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = IRQ_DB5500_PMU1, + .end = IRQ_DB5500_PMU1, + .flags = IORESOURCE_IRQ, + }, + }; + + platform_device_register_simple("arm-pmu", ARM_PMU_DEVICE_CPU, + res, ARRAY_SIZE(res)); +} + static int usb_db5500_rx_dma_cfg[] = { DB5500_DMA_DEV4_USB_OTG_IEP_1_9, DB5500_DMA_DEV5_USB_OTG_IEP_2_10, @@ -218,6 +215,7 @@ static int usb_db5500_tx_dma_cfg[] = { void __init u5500_init_devices(void) { db5500_add_gpios(); + db5500_pmu_init(); db5500_dma_init(); db5500_add_rtc(); db5500_add_usb(usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg); diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 13e8890a8b8a..7176ee7491ab 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2008-2009 ST-Ericsson + * Copyright (C) 2008-2009 ST-Ericsson SA * * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> * @@ -35,12 +35,11 @@ static struct map_desc u8500_uart_io_desc[] __initdata = { }; static struct map_desc u8500_io_desc[] __initdata = { - __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K), + /* SCU base also covers GIC CPU BASE and TWD with its 4K page */ + __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K), __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K), __IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K), - __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K), __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), - __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K), __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K), __IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K), @@ -54,19 +53,6 @@ static struct map_desc u8500_io_desc[] __initdata = { __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K), -}; - -static struct map_desc u8500_ed_io_desc[] __initdata = { - __IO_DEV_DESC(U8500_MTU0_BASE_ED, SZ_4K), - __IO_DEV_DESC(U8500_CLKRST7_BASE_ED, SZ_8K), -}; - -static struct map_desc u8500_v1_io_desc[] __initdata = { - __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), - __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE_V1, SZ_4K), -}; - -static struct map_desc u8500_v2_io_desc[] __initdata = { __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K), }; @@ -81,13 +67,6 @@ void __init u8500_map_io(void) iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); - if (cpu_is_u8500ed()) - iotable_init(u8500_ed_io_desc, ARRAY_SIZE(u8500_ed_io_desc)); - else if (cpu_is_u8500v1()) - iotable_init(u8500_v1_io_desc, ARRAY_SIZE(u8500_v1_io_desc)); - else if (cpu_is_u8500v2()) - iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc)); - _PRCMU_BASE = __io_address(U8500_PRCMU_BASE); } @@ -156,12 +135,9 @@ static resource_size_t __initdata db8500_gpio_base[] = { static void __init db8500_add_gpios(void) { struct nmk_gpio_platform_data pdata = { - /* No custom data yet */ + .supports_sleepmode = true, }; - if (cpu_is_u8500v2()) - pdata.supports_sleepmode = true; - dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base), IRQ_DB8500_GPIO0, &pdata); } @@ -193,9 +169,6 @@ static int usb_db8500_tx_dma_cfg[] = { */ void __init u8500_init_devices(void) { - if (cpu_is_u8500ed()) - dma40_u8500ed_fixup(); - db8500_add_rtc(); db8500_add_gpios(); db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 73b17404b194..a7c6cdc9b11e 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -166,16 +166,6 @@ struct platform_device u8500_dma40_device = { .resource = dma40_resources }; -void dma40_u8500ed_fixup(void) -{ - dma40_plat_data.memcpy = NULL; - dma40_plat_data.memcpy_len = 0; - dma40_resources[0].start = U8500_DMA_BASE_ED; - dma40_resources[0].end = U8500_DMA_BASE_ED + SZ_4K - 1; - dma40_resources[1].start = U8500_DMA_LCPA_BASE_ED; - dma40_resources[1].end = U8500_DMA_LCPA_BASE_ED + 2 * SZ_1K - 1; -} - struct resource keypad_resources[] = { [0] = { .start = U8500_SKE_BASE, diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c index d35122ebc67b..15a0f63b2e2b 100644 --- a/arch/arm/mach-ux500/id.c +++ b/arch/arm/mach-ux500/id.c @@ -65,6 +65,7 @@ static unsigned int partnumber(unsigned int asicid) * DB8500v1 0x411fc091 0x9001FFF4 0x008500A0 * DB8500v1.1 0x411fc091 0x9001FFF4 0x008500A1 * DB8500v2 0x412fc091 0x9001DBF4 0x008500B0 + * DB8520v2.2 0x412fc091 0x9001DBF4 0x008500B2 * DB5500v1 0x412fc091 0x9001FFF4 0x005500A0 */ @@ -80,9 +81,10 @@ void __init ux500_map_io(void) addr = 0x9001FFF4; break; - case 0x412fc091: /* DB8500v2 / DB5500v1 */ + case 0x412fc091: /* DB8520 / DB8500v2 / DB5500v1 */ asicid = ux500_read_asicid(0x9001DBF4); - if (partnumber(asicid) == 0x8500) + if (partnumber(asicid) == 0x8500 || + partnumber(asicid) == 0x8520) /* DB8500v2 */ break; diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h index 994b5fe6f85a..8e714bcb099f 100644 --- a/arch/arm/mach-ux500/include/mach/db5500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h @@ -65,8 +65,11 @@ #define U5500_PRCMU_TIMER_4_BASE (U5500_PER4_BASE + 0x07450) #define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000) #define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000) +#define U5500_MTIMER_BASE (U5500_PER4_BASE + 0xC000) #define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000) #define U5500_PRCMU_TCDM_BASE (U5500_PER4_BASE + 0x18000) +#define U5500_PRCMU_TCPM_BASE (U5500_PER4_BASE + 0x10000) +#define U5500_TPIU_BASE (U5500_PER4_BASE + 0x50000) #define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000) #define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000) @@ -125,6 +128,7 @@ #define U5500_ACCCON_BASE (0xBFFF1000) #define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020) #define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC) +#define U5500_INTCON_MBOX1_INT_RESET_ADDR (0xBFFD31A4) #define U5500_ESRAM_BASE 0x40000000 #define U5500_ESRAM_DMA_LCPA_OFFSET 0x10000 diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index 751b0e6938d4..80e10f50282e 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -22,7 +22,9 @@ #define U8500_ESRAM_DMA_LCPA_OFFSET 0x10000 #define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET) -#define U8500_DMA_LCPA_BASE_ED (U8500_ESRAM_BANK4 + 0x4000) + +/* This address fulfills the 256k alignment requirement of the lcla base */ +#define U8500_DMA_LCLA_BASE U8500_ESRAM_BANK4 #define U8500_PER3_BASE 0x80000000 #define U8500_STM_BASE 0x80100000 @@ -40,15 +42,14 @@ #define U8500_ASIC_ID_BASE 0x9001D000 #define U8500_PER6_BASE 0xa03c0000 +#define U8500_PER7_BASE 0xa03d0000 #define U8500_PER5_BASE 0xa03e0000 -#define U8500_PER7_BASE_ED 0xa03d0000 #define U8500_SVA_BASE 0xa0100000 #define U8500_SIA_BASE 0xa0200000 #define U8500_SGA_BASE 0xa0300000 #define U8500_MCDE_BASE 0xa0350000 -#define U8500_DMA_BASE_ED 0xa0362000 #define U8500_DMA_BASE 0x801C0000 /* v1 */ #define U8500_SBAG_BASE 0xa0390000 @@ -66,13 +67,6 @@ #define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000) #define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000) -/* per7 base addresses */ -#define U8500_CR_BASE_ED (U8500_PER7_BASE_ED + 0x8000) -#define U8500_MTU0_BASE_ED (U8500_PER7_BASE_ED + 0xa000) -#define U8500_MTU1_BASE_ED (U8500_PER7_BASE_ED + 0xb000) -#define U8500_TZPC0_BASE_ED (U8500_PER7_BASE_ED + 0xc000) -#define U8500_CLKRST7_BASE_ED (U8500_PER7_BASE_ED + 0xf000) - #define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) #define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) @@ -102,12 +96,10 @@ #define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000) #define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) #define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) -#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338) -#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450) -#define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000) #define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) #define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000) - +#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338) +#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450) /* per3 base addresses */ #define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h index 020b6369a30a..5f6cb71fc62d 100644 --- a/arch/arm/mach-ux500/include/mach/devices.h +++ b/arch/arm/mach-ux500/include/mach/devices.h @@ -18,6 +18,4 @@ extern struct amba_device ux500_pl031_device; extern struct platform_device u8500_dma40_device; extern struct platform_device ux500_ske_keypad_device; -void dma40_u8500ed_fixup(void); - #endif diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S index 071bba94f727..e16299e1020a 100644 --- a/arch/arm/mach-ux500/include/mach/entry-macro.S +++ b/arch/arm/mach-ux500/include/mach/entry-macro.S @@ -10,8 +10,6 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <mach/hardware.h> -#include <asm/hardware/entry-macro-gic.S> .macro disable_fiq .endm diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h index 7389df911b1a..c01ef66537f3 100644 --- a/arch/arm/mach-ux500/include/mach/gpio.h +++ b/arch/arm/mach-ux500/include/mach/gpio.h @@ -1,10 +1,5 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H -/* - * 288 (#267 is the highest one actually hooked up) onchip GPIOs, plus enough - * room for a couple of GPIO expanders. - */ -#define ARCH_NR_GPIOS 350 #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 470ac52663d6..b6ba26a1367d 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -10,20 +10,21 @@ #ifndef __MACH_HARDWARE_H #define __MACH_HARDWARE_H -/* macros to get at IO space when running virtually +/* + * Macros to get at IO space when running virtually * We dont map all the peripherals, let ioremap do * this for us. We map only very basic peripherals here. */ #define U8500_IO_VIRTUAL 0xf0000000 #define U8500_IO_PHYSICAL 0xa0000000 -/* this macro is used in assembly, so no cast */ +/* This macro is used in assembly, so no cast */ #define IO_ADDRESS(x) \ (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL) /* typesafe io address */ #define __io_address(n) __io(IO_ADDRESS(n)) -/* used by some plat-nomadik code */ +/* Used by some plat-nomadik code */ #define io_p2v(n) __io_address(n) #include <mach/db8500-regs.h> @@ -36,6 +37,5 @@ extern void __iomem *_PRCMU_BASE; #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) -#endif - +#endif /* __ASSEMBLY__ */ #endif /* __MACH_HARDWARE_H */ diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h index 02b541a37ee5..833d6a6edc9b 100644 --- a/arch/arm/mach-ux500/include/mach/id.h +++ b/arch/arm/mach-ux500/include/mach/id.h @@ -47,6 +47,30 @@ static inline bool __attribute_const__ cpu_is_u5500(void) } /* + * 5500 revisions + */ + +static inline bool __attribute_const__ cpu_is_u5500v1(void) +{ + return cpu_is_u5500() && (dbx500_revision() & 0xf0) == 0xA0; +} + +static inline bool __attribute_const__ cpu_is_u5500v2(void) +{ + return (dbx500_id.revision & 0xf0) == 0xB0; +} + +static inline bool __attribute_const__ cpu_is_u5500v20(void) +{ + return cpu_is_u5500() && ((dbx500_revision() & 0xf0) == 0xB0); +} + +static inline bool __attribute_const__ cpu_is_u5500v21(void) +{ + return cpu_is_u5500() && (dbx500_revision() == 0xB1); +} + +/* * 8500 revisions */ diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h index c0cd8006f1a2..258e5c919c24 100644 --- a/arch/arm/mach-ux500/include/mach/system.h +++ b/arch/arm/mach-ux500/include/mach/system.h @@ -17,9 +17,4 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ - /* yet to be implemented - TODO */ -} - #endif diff --git a/arch/arm/mach-ux500/include/mach/vmalloc.h b/arch/arm/mach-ux500/include/mach/vmalloc.h deleted file mode 100644 index a4945cb41172..000000000000 --- a/arch/arm/mach-ux500/include/mach/vmalloc.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END 0xf0000000UL diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index e340a54251df..02b7b9303f3b 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -22,7 +22,6 @@ #include <linux/device.h> #include <linux/dma-mapping.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> #include <linux/interrupt.h> #include <linux/irqdomain.h> #include <linux/of_address.h> @@ -141,11 +140,6 @@ static struct map_desc versatile_io_desc[] __initdata = { }, #ifdef CONFIG_MACH_VERSATILE_AB { - .virtual = IO_ADDRESS(VERSATILE_GPIO0_BASE), - .pfn = __phys_to_pfn(VERSATILE_GPIO0_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(VERSATILE_IB2_BASE), .pfn = __phys_to_pfn(VERSATILE_IB2_BASE), .length = SZ_64M, @@ -745,6 +739,19 @@ static void versatile_leds_event(led_event_t ledevt) } #endif /* CONFIG_LEDS */ +void versatile_restart(char mode, const char *cmd) +{ + void __iomem *sys = __io_address(VERSATILE_SYS_BASE); + u32 val; + + val = __raw_readl(sys + VERSATILE_SYS_RESETCTL_OFFSET); + val |= 0x105; + + __raw_writel(0xa05f, sys + VERSATILE_SYS_LOCK_OFFSET); + __raw_writel(val, sys + VERSATILE_SYS_RESETCTL_OFFSET); + __raw_writel(0, sys + VERSATILE_SYS_LOCK_OFFSET); +} + /* Early initializations */ void __init versatile_init_early(void) { diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h index e01422700ebb..2ef2f555f315 100644 --- a/arch/arm/mach-versatile/core.h +++ b/arch/arm/mach-versatile/core.h @@ -30,6 +30,7 @@ extern void __init versatile_init_early(void); extern void __init versatile_init_irq(void); extern void __init versatile_map_io(void); extern struct sys_timer versatile_timer; +extern void versatile_restart(char, const char *); extern unsigned int mmc_status(struct device *dev); #ifdef CONFIG_OF extern struct of_dev_auxdata versatile_auxdata_lookup[]; diff --git a/arch/arm/mach-versatile/include/mach/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S index e6f7c1663160..b6f0dbf122ee 100644 --- a/arch/arm/mach-versatile/include/mach/entry-macro.S +++ b/arch/arm/mach-versatile/include/mach/entry-macro.S @@ -7,39 +7,9 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <mach/hardware.h> -#include <mach/platform.h> -#include <asm/hardware/vic.h> .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - ldr \base, =IO_ADDRESS(VERSATILE_VIC_BASE) - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status - mov \irqnr, #0 - teq \irqstat, #0 - beq 1003f - -1001: tst \irqstat, #15 - bne 1002f - add \irqnr, \irqnr, #4 - movs \irqstat, \irqstat, lsr #4 - bne 1001b -1002: tst \irqstat, #1 - bne 1003f - add \irqnr, \irqnr, #1 - movs \irqstat, \irqstat, lsr #1 - bne 1002b -1003: /* EQ will be set if no irqs pending */ - -@ clz \irqnr, \irqstat -@1003: /* EQ will be set if we reach MAXIRQNUM */ - .endm - diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h index 8ffc12a7cb25..f3fa347895f0 100644 --- a/arch/arm/mach-versatile/include/mach/system.h +++ b/arch/arm/mach-versatile/include/mach/system.h @@ -21,10 +21,6 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <linux/io.h> -#include <mach/hardware.h> -#include <mach/platform.h> - static inline void arch_idle(void) { /* @@ -34,16 +30,4 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ - u32 val; - - val = __raw_readl(IO_ADDRESS(VERSATILE_SYS_RESETCTL)) & ~0x7; - val |= 0x105; - - __raw_writel(0xa05f, IO_ADDRESS(VERSATILE_SYS_LOCK)); - __raw_writel(val, IO_ADDRESS(VERSATILE_SYS_RESETCTL)); - __raw_writel(0, IO_ADDRESS(VERSATILE_SYS_LOCK)); -} - #endif diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h deleted file mode 100644 index 7d8e069ad51b..000000000000 --- a/arch/arm/mach-versatile/include/mach/vmalloc.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/vmalloc.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END 0xd8000000UL diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index c898deb3ada0..90069bce23bc 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -191,7 +191,7 @@ static struct resource pre_mem = { .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH, }; -static int __init pci_versatile_setup_resources(struct resource **resource) +static int __init pci_versatile_setup_resources(struct list_head *resources) { int ret = 0; @@ -215,13 +215,13 @@ static int __init pci_versatile_setup_resources(struct resource **resource) } /* - * bus->resource[0] is the IO resource for this bus - * bus->resource[1] is the mem resource for this bus - * bus->resource[2] is the prefetch mem resource for this bus + * the IO resource for this bus + * the mem resource for this bus + * the prefetch mem resource for this bus */ - resource[0] = &io_mem; - resource[1] = &non_mem; - resource[2] = &pre_mem; + pci_add_resource(resources, &io_mem); + pci_add_resource(resources, &non_mem); + pci_add_resource(resources, &pre_mem); goto out; @@ -250,7 +250,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) if (nr == 0) { sys->mem_offset = 0; - ret = pci_versatile_setup_resources(sys->resource); + ret = pci_versatile_setup_resources(&sys->resources); if (ret < 0) { printk("pci_versatile_setup: resources... oops?\n"); goto out; @@ -306,7 +306,8 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) struct pci_bus * __init pci_versatile_scan_bus(int nr, struct pci_sys_data *sys) { - return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys); + return pci_scan_root_bus(NULL, sys->busnr, &pci_versatile_ops, sys, + &sys->resources); } void __init pci_versatile_preinit(void) diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c index fda4866703cd..98f65493177a 100644 --- a/arch/arm/mach-versatile/versatile_ab.c +++ b/arch/arm/mach-versatile/versatile_ab.c @@ -21,12 +21,12 @@ #include <linux/init.h> #include <linux/device.h> -#include <linux/sysdev.h> #include <linux/amba/bus.h> #include <linux/io.h> #include <mach/hardware.h> #include <asm/irq.h> +#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,6 +39,8 @@ MACHINE_START(VERSATILE_AB, "ARM-Versatile AB") .map_io = versatile_map_io, .init_early = versatile_init_early, .init_irq = versatile_init_irq, + .handle_irq = vic_handle_irq, .timer = &versatile_timer, .init_machine = versatile_init, + .restart = versatile_restart, MACHINE_END diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c index 54e037c090f5..ae5ad3c8f3dd 100644 --- a/arch/arm/mach-versatile/versatile_dt.c +++ b/arch/arm/mach-versatile/versatile_dt.c @@ -24,6 +24,7 @@ #include <linux/init.h> #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -45,7 +46,9 @@ DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)") .map_io = versatile_map_io, .init_early = versatile_init_early, .init_irq = versatile_init_irq, + .handle_irq = vic_handle_irq, .timer = &versatile_timer, .init_machine = versatile_dt_init, .dt_compat = versatile_dt_match, + .restart = versatile_restart, MACHINE_END diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index feaf9cbe60f6..9581c197500c 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -21,13 +21,13 @@ #include <linux/init.h> #include <linux/device.h> -#include <linux/sysdev.h> #include <linux/amba/bus.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> #include <linux/io.h> #include <mach/hardware.h> +#include <asm/hardware/vic.h> #include <asm/irq.h> #include <asm/mach-types.h> @@ -107,6 +107,8 @@ MACHINE_START(VERSATILE_PB, "ARM-Versatile PB") .map_io = versatile_map_io, .init_early = versatile_init_early, .init_irq = versatile_init_irq, + .handle_irq = vic_handle_irq, .timer = &versatile_timer, .init_machine = versatile_pb_init, + .restart = versatile_restart, MACHINE_END diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 931148487f0b..9b3d0fbaee72 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -8,5 +8,7 @@ config ARCH_VEXPRESS_CA9X4 select ARM_ERRATA_720789 select ARM_ERRATA_751472 select ARM_ERRATA_753970 + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 endmenu diff --git a/arch/arm/mach-vexpress/include/mach/entry-macro.S b/arch/arm/mach-vexpress/include/mach/entry-macro.S index 73c11297509e..a14f9e62ca92 100644 --- a/arch/arm/mach-vexpress/include/mach/entry-macro.S +++ b/arch/arm/mach-vexpress/include/mach/entry-macro.S @@ -1,5 +1,3 @@ -#include <asm/hardware/entry-macro-gic.S> - .macro disable_fiq .endm diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h index 899a4e628a4c..f653a8e265bd 100644 --- a/arch/arm/mach-vexpress/include/mach/system.h +++ b/arch/arm/mach-vexpress/include/mach/system.h @@ -30,8 +30,4 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ -} - #endif diff --git a/arch/arm/mach-vexpress/include/mach/vmalloc.h b/arch/arm/mach-vexpress/include/mach/vmalloc.h deleted file mode 100644 index f43a36ef678b..000000000000 --- a/arch/arm/mach-vexpress/include/mach/vmalloc.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-vexpress/include/mach/vmalloc.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END 0xf8000000UL diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 1fafc3244607..b4a28ca0e50a 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -10,7 +10,7 @@ #include <linux/ata_platform.h> #include <linux/smsc911x.h> #include <linux/spinlock.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/usb/isp1760.h> #include <linux/clkdev.h> #include <linux/mtd/physmap.h> @@ -23,6 +23,7 @@ #include <asm/hardware/arm_timer.h> #include <asm/hardware/timer-sp.h> #include <asm/hardware/sp810.h> +#include <asm/hardware/gic.h> #include <mach/ct-ca9x4.h> #include <mach/motherboard.h> @@ -437,7 +438,6 @@ static void __init v2m_init(void) amba_device_register(v2m_amba_devs[i], &iomem_resource); pm_power_off = v2m_power_off; - arm_pm_restart = v2m_restart; ct_desc->init_tile(); } @@ -448,5 +448,7 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express") .init_early = v2m_init_early, .init_irq = v2m_init_irq, .timer = &v2m_timer, + .handle_irq = gic_handle_irq, .init_machine = v2m_init, + .restart = v2m_restart, MACHINE_END diff --git a/arch/arm/mach-vt8500/include/mach/vmalloc.h b/arch/arm/mach-vt8500/include/mach/vmalloc.h deleted file mode 100644 index 4642290ce416..000000000000 --- a/arch/arm/mach-vt8500/include/mach/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-vt8500/include/mach/vmalloc.h - * - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END 0xd0000000UL diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c index 0a235e502330..604e1db266e8 100644 --- a/arch/arm/mach-w90x900/cpu.c +++ b/arch/arm/mach-w90x900/cpu.c @@ -33,9 +33,11 @@ #include <mach/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-ebi.h> +#include <mach/regs-timer.h> #include "cpu.h" #include "clock.h" +#include "nuc9xx.h" /* Initial IO mappings */ @@ -222,3 +224,17 @@ void __init nuc900_init_clocks(void) clkdev_add_table(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs)); } +#define WTCR (TMR_BA + 0x1C) +#define WTCLK (1 << 10) +#define WTE (1 << 7) +#define WTRE (1 << 1) + +void nuc9xx_restart(char mode, const char *cmd) +{ + if (mode == 's') { + /* Jump into ROM at address 0 */ + soft_restart(0); + } else { + __raw_writel(WTE | WTRE | WTCLK, WTCR); + } +} diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h index ce228bdc66dd..2aaeb9311619 100644 --- a/arch/arm/mach-w90x900/include/mach/system.h +++ b/arch/arm/mach-w90x900/include/mach/system.h @@ -14,28 +14,6 @@ * (at your option) any later version. * */ - -#include <linux/io.h> -#include <asm/proc-fns.h> -#include <mach/map.h> -#include <mach/regs-timer.h> - -#define WTCR (TMR_BA + 0x1C) -#define WTCLK (1 << 10) -#define WTE (1 << 7) -#define WTRE (1 << 1) - static void arch_idle(void) { } - -static void arch_reset(char mode, const char *cmd) -{ - if (mode == 's') { - /* Jump into ROM at address 0 */ - cpu_reset(0); - } else { - __raw_writel(WTE | WTRE | WTCLK, WTCR); - } -} - diff --git a/arch/arm/mach-w90x900/include/mach/vmalloc.h b/arch/arm/mach-w90x900/include/mach/vmalloc.h deleted file mode 100644 index b067e44500a4..000000000000 --- a/arch/arm/mach-w90x900/include/mach/vmalloc.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/vmalloc.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/vmalloc.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END (0xe0000000UL) - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c index 7bf143c443f1..d66d43ae8df5 100644 --- a/arch/arm/mach-w90x900/irq.c +++ b/arch/arm/mach-w90x900/irq.c @@ -19,7 +19,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/ptrace.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/io.h> #include <asm/irq.h> @@ -28,6 +28,8 @@ #include <mach/hardware.h> #include <mach/regs-irq.h> +#include "nuc9xx.h" + struct group_irq { unsigned long gpen; unsigned int enabled; diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c index 31c109018228..b4243e4f1565 100644 --- a/arch/arm/mach-w90x900/mach-nuc910evb.c +++ b/arch/arm/mach-w90x900/mach-nuc910evb.c @@ -38,4 +38,5 @@ MACHINE_START(W90P910EVB, "W90P910EVB") .init_irq = nuc900_init_irq, .init_machine = nuc910evb_init, .timer = &nuc900_timer, + .restart = nuc9xx_restart, MACHINE_END diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c index 4062e55a57d8..067d8f9166dc 100644 --- a/arch/arm/mach-w90x900/mach-nuc950evb.c +++ b/arch/arm/mach-w90x900/mach-nuc950evb.c @@ -41,4 +41,5 @@ MACHINE_START(W90P950EVB, "W90P950EVB") .init_irq = nuc900_init_irq, .init_machine = nuc950evb_init, .timer = &nuc900_timer, + .restart = nuc9xx_restart, MACHINE_END diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c index 0ab9995d5b58..cbb3adc3db10 100644 --- a/arch/arm/mach-w90x900/mach-nuc960evb.c +++ b/arch/arm/mach-w90x900/mach-nuc960evb.c @@ -38,4 +38,5 @@ MACHINE_START(W90N960EVB, "W90N960EVB") .init_irq = nuc900_init_irq, .init_machine = nuc960evb_init, .timer = &nuc900_timer, + .restart = nuc9xx_restart, MACHINE_END diff --git a/arch/arm/mach-w90x900/nuc910.h b/arch/arm/mach-w90x900/nuc910.h index 83e9ba5fc26c..b14c71a9e683 100644 --- a/arch/arm/mach-w90x900/nuc910.h +++ b/arch/arm/mach-w90x900/nuc910.h @@ -12,14 +12,7 @@ * published by the Free Software Foundation. * */ - -struct map_desc; -struct sys_timer; - -/* core initialisation functions */ - -extern void nuc900_init_irq(void); -extern struct sys_timer nuc900_timer; +#include "nuc9xx.h" /* extern file from nuc910.c */ diff --git a/arch/arm/mach-w90x900/nuc950.h b/arch/arm/mach-w90x900/nuc950.h index 98a1148bc5ae..6e9de3051cd4 100644 --- a/arch/arm/mach-w90x900/nuc950.h +++ b/arch/arm/mach-w90x900/nuc950.h @@ -12,14 +12,7 @@ * published by the Free Software Foundation. * */ - -struct map_desc; -struct sys_timer; - -/* core initialisation functions */ - -extern void nuc900_init_irq(void); -extern struct sys_timer nuc900_timer; +#include "nuc9xx.h" /* extern file from nuc950.c */ diff --git a/arch/arm/mach-w90x900/nuc960.h b/arch/arm/mach-w90x900/nuc960.h index f0c07cbe3a82..9f6df9a00286 100644 --- a/arch/arm/mach-w90x900/nuc960.h +++ b/arch/arm/mach-w90x900/nuc960.h @@ -12,14 +12,7 @@ * published by the Free Software Foundation. * */ - -struct map_desc; -struct sys_timer; - -/* core initialisation functions */ - -extern void nuc900_init_irq(void); -extern struct sys_timer nuc900_timer; +#include "nuc9xx.h" /* extern file from nuc960.c */ diff --git a/arch/arm/mach-w90x900/nuc9xx.h b/arch/arm/mach-w90x900/nuc9xx.h new file mode 100644 index 000000000000..91acb4047793 --- /dev/null +++ b/arch/arm/mach-w90x900/nuc9xx.h @@ -0,0 +1,24 @@ +/* + * arch/arm/mach-w90x900/nuc9xx.h + * + * Copied from nuc910.h, which had: + * + * Copyright (c) 2008 Nuvoton corporation + * + * Header file for NUC900 CPU support + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +struct map_desc; +struct sys_timer; + +/* core initialisation functions */ + +extern void nuc900_init_irq(void); +extern struct sys_timer nuc900_timer; +extern void nuc9xx_restart(char, const char *); diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c index a2c4e2d0a0d4..fa27c498ac09 100644 --- a/arch/arm/mach-w90x900/time.c +++ b/arch/arm/mach-w90x900/time.c @@ -33,6 +33,8 @@ #include <mach/map.h> #include <mach/regs-timer.h> +#include "nuc9xx.h" + #define RESETINT 0x1f #define PERIOD (0x01 << 27) #define ONESHOT (0x00 << 27) diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 73e93687b81a..ab5cfddc0d7b 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -112,6 +112,7 @@ static const char *xilinx_dt_match[] = { MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform") .map_io = xilinx_map_io, .init_irq = xilinx_irq_init, + .handle_irq = gic_handle_irq, .init_machine = xilinx_init_machine, .timer = &xttcpss_sys_timer, .dt_compat = xilinx_dt_match, diff --git a/arch/arm/mach-zynq/include/mach/entry-macro.S b/arch/arm/mach-zynq/include/mach/entry-macro.S index 3cfc01b37461..d621fb732569 100644 --- a/arch/arm/mach-zynq/include/mach/entry-macro.S +++ b/arch/arm/mach-zynq/include/mach/entry-macro.S @@ -20,9 +20,6 @@ * GNU General Public License for more details. */ -#include <mach/hardware.h> -#include <asm/hardware/entry-macro-gic.S> - .macro disable_fiq .endm diff --git a/arch/arm/mach-zynq/include/mach/system.h b/arch/arm/mach-zynq/include/mach/system.h index 1b84d705c675..8e88e0b8d2ba 100644 --- a/arch/arm/mach-zynq/include/mach/system.h +++ b/arch/arm/mach-zynq/include/mach/system.h @@ -20,9 +20,4 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ - /* Add architecture specific reset processing here */ -} - #endif diff --git a/arch/arm/mach-zynq/include/mach/vmalloc.h b/arch/arm/mach-zynq/include/mach/vmalloc.h deleted file mode 100644 index 2398eff1e8b8..000000000000 --- a/arch/arm/mach-zynq/include/mach/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* arch/arm/mach-zynq/include/mach/vmalloc.h - * - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_VMALLOC_H__ -#define __MACH_VMALLOC_H__ - -#define VMALLOC_END 0xE0000000UL - -#endif diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 67f75a0b66d6..4cefb57d9ed2 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -629,6 +629,23 @@ config IO_36 comment "Processor Features" +config ARM_LPAE + bool "Support for the Large Physical Address Extension" + depends on MMU && CPU_V7 + help + Say Y if you have an ARMv7 processor supporting the LPAE page + table format and you would like to access memory beyond the + 4GB limit. The resulting kernel image will not run on + processors without the LPA extension. + + If unsure, say N. + +config ARCH_PHYS_ADDR_T_64BIT + def_bool ARM_LPAE + +config ARCH_DMA_ADDR_T_64BIT + bool + config ARM_THUMB bool "Support Thumb user binaries" depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || CPU_V7 || CPU_FEROCEON @@ -816,14 +833,23 @@ config CACHE_FEROCEON_L2_WRITETHROUGH Say Y here to use the Feroceon L2 cache in writethrough mode. Unless you specifically require this, say N for writeback mode. +config MIGHT_HAVE_CACHE_L2X0 + bool + help + This option should be selected by machines which have a L2x0 + or PL310 cache controller, but where its use is optional. + + The only effect of this option is to make CACHE_L2X0 and + related options available to the user for configuration. + + Boards or SoCs which always require the cache controller + support to be present should select CACHE_L2X0 directly + instead of this option, thus preventing the user from + inadvertently configuring a broken kernel. + config CACHE_L2X0 - bool "Enable the L2x0 outer cache controller" - depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ - REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \ - ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \ - ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \ - ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK - default y + bool "Enable the L2x0 outer cache controller" if MIGHT_HAVE_CACHE_L2X0 + default MIGHT_HAVE_CACHE_L2X0 select OUTER_CACHE select OUTER_CACHE_SYNC help diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index c335c76e0d88..caf14dc059e5 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -968,7 +968,7 @@ static int __init alignment_init(void) ai_usermode = safe_usermode(ai_usermode, false); } - hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN, + hook_fault_code(FAULT_CODE_ALIGNMENT, do_alignment, SIGBUS, BUS_ADRALN, "alignment exception"); /* diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 93aac068da94..ee9bb363d606 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -22,6 +22,21 @@ unsigned int cpu_last_asid = ASID_FIRST_VERSION; DEFINE_PER_CPU(struct mm_struct *, current_mm); #endif +#ifdef CONFIG_ARM_LPAE +#define cpu_set_asid(asid) { \ + unsigned long ttbl, ttbh; \ + asm volatile( \ + " mrrc p15, 0, %0, %1, c2 @ read TTBR0\n" \ + " mov %1, %2, lsl #(48 - 32) @ set ASID\n" \ + " mcrr p15, 0, %0, %1, c2 @ set TTBR0\n" \ + : "=&r" (ttbl), "=&r" (ttbh) \ + : "r" (asid & ~ASID_MASK)); \ +} +#else +#define cpu_set_asid(asid) \ + asm(" mcr p15, 0, %0, c13, c0, 1\n" : : "r" (asid)) +#endif + /* * We fork()ed a process, and we need a new context for the child * to run in. We reserve version 0 for initial tasks so we will @@ -37,7 +52,7 @@ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) static void flush_context(void) { /* set the reserved ASID before flushing the TLB */ - asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (0)); + cpu_set_asid(0); isb(); local_flush_tlb_all(); if (icache_is_vivt_asid_tagged()) { @@ -99,7 +114,7 @@ static void reset_context(void *info) set_mm_context(mm, asid); /* set the new ASID */ - asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (mm->context.id)); + cpu_set_asid(mm->context.id); isb(); } diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index aa33949fef60..bb7eac381a8e 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -27,19 +27,6 @@ #include "fault.h" -/* - * Fault status register encodings. We steal bit 31 for our own purposes. - */ -#define FSR_LNX_PF (1 << 31) -#define FSR_WRITE (1 << 11) -#define FSR_FS4 (1 << 10) -#define FSR_FS3_0 (15) - -static inline int fsr_fs(unsigned int fsr) -{ - return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6; -} - #ifdef CONFIG_MMU #ifdef CONFIG_KPROBES @@ -123,8 +110,10 @@ void show_pte(struct mm_struct *mm, unsigned long addr) pte = pte_offset_map(pmd, addr); printk(", *pte=%08llx", (long long)pte_val(*pte)); +#ifndef CONFIG_ARM_LPAE printk(", *ppte=%08llx", (long long)pte_val(pte[PTE_HWTABLE_PTRS])); +#endif pte_unmap(pte); } while(0); @@ -231,7 +220,7 @@ static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma) static int __kprobes __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr, - struct task_struct *tsk) + unsigned int flags, struct task_struct *tsk) { struct vm_area_struct *vma; int fault; @@ -253,18 +242,7 @@ good_area: goto out; } - /* - * If for any reason at all we couldn't handle the fault, make - * sure we exit gracefully rather than endlessly redo the fault. - */ - fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & FSR_WRITE) ? FAULT_FLAG_WRITE : 0); - if (unlikely(fault & VM_FAULT_ERROR)) - return fault; - if (fault & VM_FAULT_MAJOR) - tsk->maj_flt++; - else - tsk->min_flt++; - return fault; + return handle_mm_fault(mm, vma, addr & PAGE_MASK, flags); check_stack: if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr)) @@ -279,6 +257,9 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) struct task_struct *tsk; struct mm_struct *mm; int fault, sig, code; + int write = fsr & FSR_WRITE; + unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE | + (write ? FAULT_FLAG_WRITE : 0); if (notify_page_fault(regs, fsr)) return 0; @@ -305,6 +286,7 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (!down_read_trylock(&mm->mmap_sem)) { if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc)) goto no_context; +retry: down_read(&mm->mmap_sem); } else { /* @@ -320,14 +302,41 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) #endif } - fault = __do_page_fault(mm, addr, fsr, tsk); - up_read(&mm->mmap_sem); + fault = __do_page_fault(mm, addr, fsr, flags, tsk); + + /* If we need to retry but a fatal signal is pending, handle the + * signal first. We do not need to release the mmap_sem because + * it would already be released in __lock_page_or_retry in + * mm/filemap.c. */ + if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) + return 0; + + /* + * Major/minor page fault accounting is only done on the + * initial attempt. If we go through a retry, it is extremely + * likely that the page will be found in page cache at that point. + */ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr); - if (fault & VM_FAULT_MAJOR) - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, addr); - else if (fault & VM_FAULT_MINOR) - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, addr); + if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (fault & VM_FAULT_MAJOR) { + tsk->maj_flt++; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, + regs, addr); + } else { + tsk->min_flt++; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, + regs, addr); + } + if (fault & VM_FAULT_RETRY) { + /* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk + * of starvation. */ + flags &= ~FAULT_FLAG_ALLOW_RETRY; + goto retry; + } + } + + up_read(&mm->mmap_sem); /* * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR @@ -441,6 +450,12 @@ do_translation_fault(unsigned long addr, unsigned int fsr, pmd = pmd_offset(pud, addr); pmd_k = pmd_offset(pud_k, addr); +#ifdef CONFIG_ARM_LPAE + /* + * Only one hardware entry per PMD with LPAE. + */ + index = 0; +#else /* * On ARM one Linux PGD entry contains two hardware entries (see page * tables layout in pgtable.h). We normally guarantee that we always @@ -450,6 +465,7 @@ do_translation_fault(unsigned long addr, unsigned int fsr, * for the first of pair. */ index = (addr >> SECTION_SHIFT) & 1; +#endif if (pmd_none(pmd_k[index])) goto bad_area; @@ -489,55 +505,20 @@ do_bad(unsigned long addr, unsigned int fsr, struct pt_regs *regs) return 1; } -static struct fsr_info { +struct fsr_info { int (*fn)(unsigned long addr, unsigned int fsr, struct pt_regs *regs); int sig; int code; const char *name; -} fsr_info[] = { - /* - * The following are the standard ARMv3 and ARMv4 aborts. ARMv5 - * defines these to be "precise" aborts. - */ - { do_bad, SIGSEGV, 0, "vector exception" }, - { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" }, - { do_bad, SIGKILL, 0, "terminal exception" }, - { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" }, - { do_bad, SIGBUS, 0, "external abort on linefetch" }, - { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" }, - { do_bad, SIGBUS, 0, "external abort on linefetch" }, - { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" }, - { do_bad, SIGBUS, 0, "external abort on non-linefetch" }, - { do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" }, - { do_bad, SIGBUS, 0, "external abort on non-linefetch" }, - { do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" }, - { do_bad, SIGBUS, 0, "external abort on translation" }, - { do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" }, - { do_bad, SIGBUS, 0, "external abort on translation" }, - { do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" }, - /* - * The following are "imprecise" aborts, which are signalled by bit - * 10 of the FSR, and may not be recoverable. These are only - * supported if the CPU abort handler supports bit 10. - */ - { do_bad, SIGBUS, 0, "unknown 16" }, - { do_bad, SIGBUS, 0, "unknown 17" }, - { do_bad, SIGBUS, 0, "unknown 18" }, - { do_bad, SIGBUS, 0, "unknown 19" }, - { do_bad, SIGBUS, 0, "lock abort" }, /* xscale */ - { do_bad, SIGBUS, 0, "unknown 21" }, - { do_bad, SIGBUS, BUS_OBJERR, "imprecise external abort" }, /* xscale */ - { do_bad, SIGBUS, 0, "unknown 23" }, - { do_bad, SIGBUS, 0, "dcache parity error" }, /* xscale */ - { do_bad, SIGBUS, 0, "unknown 25" }, - { do_bad, SIGBUS, 0, "unknown 26" }, - { do_bad, SIGBUS, 0, "unknown 27" }, - { do_bad, SIGBUS, 0, "unknown 28" }, - { do_bad, SIGBUS, 0, "unknown 29" }, - { do_bad, SIGBUS, 0, "unknown 30" }, - { do_bad, SIGBUS, 0, "unknown 31" } }; +/* FSR definition */ +#ifdef CONFIG_ARM_LPAE +#include "fsr-3level.c" +#else +#include "fsr-2level.c" +#endif + void __init hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *), int sig, int code, const char *name) @@ -573,42 +554,6 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) arm_notify_die("", regs, &info, fsr, 0); } - -static struct fsr_info ifsr_info[] = { - { do_bad, SIGBUS, 0, "unknown 0" }, - { do_bad, SIGBUS, 0, "unknown 1" }, - { do_bad, SIGBUS, 0, "debug event" }, - { do_bad, SIGSEGV, SEGV_ACCERR, "section access flag fault" }, - { do_bad, SIGBUS, 0, "unknown 4" }, - { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" }, - { do_bad, SIGSEGV, SEGV_ACCERR, "page access flag fault" }, - { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" }, - { do_bad, SIGBUS, 0, "external abort on non-linefetch" }, - { do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" }, - { do_bad, SIGBUS, 0, "unknown 10" }, - { do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" }, - { do_bad, SIGBUS, 0, "external abort on translation" }, - { do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" }, - { do_bad, SIGBUS, 0, "external abort on translation" }, - { do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" }, - { do_bad, SIGBUS, 0, "unknown 16" }, - { do_bad, SIGBUS, 0, "unknown 17" }, - { do_bad, SIGBUS, 0, "unknown 18" }, - { do_bad, SIGBUS, 0, "unknown 19" }, - { do_bad, SIGBUS, 0, "unknown 20" }, - { do_bad, SIGBUS, 0, "unknown 21" }, - { do_bad, SIGBUS, 0, "unknown 22" }, - { do_bad, SIGBUS, 0, "unknown 23" }, - { do_bad, SIGBUS, 0, "unknown 24" }, - { do_bad, SIGBUS, 0, "unknown 25" }, - { do_bad, SIGBUS, 0, "unknown 26" }, - { do_bad, SIGBUS, 0, "unknown 27" }, - { do_bad, SIGBUS, 0, "unknown 28" }, - { do_bad, SIGBUS, 0, "unknown 29" }, - { do_bad, SIGBUS, 0, "unknown 30" }, - { do_bad, SIGBUS, 0, "unknown 31" }, -}; - void __init hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *), int sig, int code, const char *name) @@ -641,6 +586,7 @@ do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs) arm_notify_die("", regs, &info, ifsr, 0); } +#ifndef CONFIG_ARM_LPAE static int __init exceptions_init(void) { if (cpu_architecture() >= CPU_ARCH_ARMv6) { @@ -663,3 +609,4 @@ static int __init exceptions_init(void) } arch_initcall(exceptions_init); +#endif diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h index 49e9e3804de4..cf08bdfbe0d6 100644 --- a/arch/arm/mm/fault.h +++ b/arch/arm/mm/fault.h @@ -1,3 +1,28 @@ -void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs); +#ifndef __ARCH_ARM_FAULT_H +#define __ARCH_ARM_FAULT_H + +/* + * Fault status register encodings. We steal bit 31 for our own purposes. + */ +#define FSR_LNX_PF (1 << 31) +#define FSR_WRITE (1 << 11) +#define FSR_FS4 (1 << 10) +#define FSR_FS3_0 (15) +#define FSR_FS5_0 (0x3f) + +#ifdef CONFIG_ARM_LPAE +static inline int fsr_fs(unsigned int fsr) +{ + return fsr & FSR_FS5_0; +} +#else +static inline int fsr_fs(unsigned int fsr) +{ + return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6; +} +#endif +void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs); unsigned long search_exception_table(unsigned long addr); + +#endif /* __ARCH_ARM_FAULT_H */ diff --git a/arch/arm/mm/fsr-2level.c b/arch/arm/mm/fsr-2level.c new file mode 100644 index 000000000000..18ca74c0f341 --- /dev/null +++ b/arch/arm/mm/fsr-2level.c @@ -0,0 +1,78 @@ +static struct fsr_info fsr_info[] = { + /* + * The following are the standard ARMv3 and ARMv4 aborts. ARMv5 + * defines these to be "precise" aborts. + */ + { do_bad, SIGSEGV, 0, "vector exception" }, + { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" }, + { do_bad, SIGKILL, 0, "terminal exception" }, + { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" }, + { do_bad, SIGBUS, 0, "external abort on linefetch" }, + { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" }, + { do_bad, SIGBUS, 0, "external abort on linefetch" }, + { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" }, + { do_bad, SIGBUS, 0, "external abort on non-linefetch" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" }, + { do_bad, SIGBUS, 0, "external abort on non-linefetch" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" }, + { do_bad, SIGBUS, 0, "external abort on translation" }, + { do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" }, + { do_bad, SIGBUS, 0, "external abort on translation" }, + { do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" }, + /* + * The following are "imprecise" aborts, which are signalled by bit + * 10 of the FSR, and may not be recoverable. These are only + * supported if the CPU abort handler supports bit 10. + */ + { do_bad, SIGBUS, 0, "unknown 16" }, + { do_bad, SIGBUS, 0, "unknown 17" }, + { do_bad, SIGBUS, 0, "unknown 18" }, + { do_bad, SIGBUS, 0, "unknown 19" }, + { do_bad, SIGBUS, 0, "lock abort" }, /* xscale */ + { do_bad, SIGBUS, 0, "unknown 21" }, + { do_bad, SIGBUS, BUS_OBJERR, "imprecise external abort" }, /* xscale */ + { do_bad, SIGBUS, 0, "unknown 23" }, + { do_bad, SIGBUS, 0, "dcache parity error" }, /* xscale */ + { do_bad, SIGBUS, 0, "unknown 25" }, + { do_bad, SIGBUS, 0, "unknown 26" }, + { do_bad, SIGBUS, 0, "unknown 27" }, + { do_bad, SIGBUS, 0, "unknown 28" }, + { do_bad, SIGBUS, 0, "unknown 29" }, + { do_bad, SIGBUS, 0, "unknown 30" }, + { do_bad, SIGBUS, 0, "unknown 31" }, +}; + +static struct fsr_info ifsr_info[] = { + { do_bad, SIGBUS, 0, "unknown 0" }, + { do_bad, SIGBUS, 0, "unknown 1" }, + { do_bad, SIGBUS, 0, "debug event" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "section access flag fault" }, + { do_bad, SIGBUS, 0, "unknown 4" }, + { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "page access flag fault" }, + { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" }, + { do_bad, SIGBUS, 0, "external abort on non-linefetch" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" }, + { do_bad, SIGBUS, 0, "unknown 10" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" }, + { do_bad, SIGBUS, 0, "external abort on translation" }, + { do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" }, + { do_bad, SIGBUS, 0, "external abort on translation" }, + { do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" }, + { do_bad, SIGBUS, 0, "unknown 16" }, + { do_bad, SIGBUS, 0, "unknown 17" }, + { do_bad, SIGBUS, 0, "unknown 18" }, + { do_bad, SIGBUS, 0, "unknown 19" }, + { do_bad, SIGBUS, 0, "unknown 20" }, + { do_bad, SIGBUS, 0, "unknown 21" }, + { do_bad, SIGBUS, 0, "unknown 22" }, + { do_bad, SIGBUS, 0, "unknown 23" }, + { do_bad, SIGBUS, 0, "unknown 24" }, + { do_bad, SIGBUS, 0, "unknown 25" }, + { do_bad, SIGBUS, 0, "unknown 26" }, + { do_bad, SIGBUS, 0, "unknown 27" }, + { do_bad, SIGBUS, 0, "unknown 28" }, + { do_bad, SIGBUS, 0, "unknown 29" }, + { do_bad, SIGBUS, 0, "unknown 30" }, + { do_bad, SIGBUS, 0, "unknown 31" }, +}; diff --git a/arch/arm/mm/fsr-3level.c b/arch/arm/mm/fsr-3level.c new file mode 100644 index 000000000000..05a4e9431836 --- /dev/null +++ b/arch/arm/mm/fsr-3level.c @@ -0,0 +1,68 @@ +static struct fsr_info fsr_info[] = { + { do_bad, SIGBUS, 0, "unknown 0" }, + { do_bad, SIGBUS, 0, "unknown 1" }, + { do_bad, SIGBUS, 0, "unknown 2" }, + { do_bad, SIGBUS, 0, "unknown 3" }, + { do_bad, SIGBUS, 0, "reserved translation fault" }, + { do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 1 translation fault" }, + { do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 2 translation fault" }, + { do_page_fault, SIGSEGV, SEGV_MAPERR, "level 3 translation fault" }, + { do_bad, SIGBUS, 0, "reserved access flag fault" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "level 1 access flag fault" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "level 2 access flag fault" }, + { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 3 access flag fault" }, + { do_bad, SIGBUS, 0, "reserved permission fault" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "level 1 permission fault" }, + { do_sect_fault, SIGSEGV, SEGV_ACCERR, "level 2 permission fault" }, + { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 3 permission fault" }, + { do_bad, SIGBUS, 0, "synchronous external abort" }, + { do_bad, SIGBUS, 0, "asynchronous external abort" }, + { do_bad, SIGBUS, 0, "unknown 18" }, + { do_bad, SIGBUS, 0, "unknown 19" }, + { do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" }, + { do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" }, + { do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" }, + { do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" }, + { do_bad, SIGBUS, 0, "synchronous parity error" }, + { do_bad, SIGBUS, 0, "asynchronous parity error" }, + { do_bad, SIGBUS, 0, "unknown 26" }, + { do_bad, SIGBUS, 0, "unknown 27" }, + { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" }, + { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" }, + { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" }, + { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" }, + { do_bad, SIGBUS, 0, "unknown 32" }, + { do_bad, SIGBUS, BUS_ADRALN, "alignment fault" }, + { do_bad, SIGBUS, 0, "debug event" }, + { do_bad, SIGBUS, 0, "unknown 35" }, + { do_bad, SIGBUS, 0, "unknown 36" }, + { do_bad, SIGBUS, 0, "unknown 37" }, + { do_bad, SIGBUS, 0, "unknown 38" }, + { do_bad, SIGBUS, 0, "unknown 39" }, + { do_bad, SIGBUS, 0, "unknown 40" }, + { do_bad, SIGBUS, 0, "unknown 41" }, + { do_bad, SIGBUS, 0, "unknown 42" }, + { do_bad, SIGBUS, 0, "unknown 43" }, + { do_bad, SIGBUS, 0, "unknown 44" }, + { do_bad, SIGBUS, 0, "unknown 45" }, + { do_bad, SIGBUS, 0, "unknown 46" }, + { do_bad, SIGBUS, 0, "unknown 47" }, + { do_bad, SIGBUS, 0, "unknown 48" }, + { do_bad, SIGBUS, 0, "unknown 49" }, + { do_bad, SIGBUS, 0, "unknown 50" }, + { do_bad, SIGBUS, 0, "unknown 51" }, + { do_bad, SIGBUS, 0, "implementation fault (lockdown abort)" }, + { do_bad, SIGBUS, 0, "unknown 53" }, + { do_bad, SIGBUS, 0, "unknown 54" }, + { do_bad, SIGBUS, 0, "unknown 55" }, + { do_bad, SIGBUS, 0, "unknown 56" }, + { do_bad, SIGBUS, 0, "unknown 57" }, + { do_bad, SIGBUS, 0, "implementation fault (coprocessor abort)" }, + { do_bad, SIGBUS, 0, "unknown 59" }, + { do_bad, SIGBUS, 0, "unknown 60" }, + { do_bad, SIGBUS, 0, "unknown 61" }, + { do_bad, SIGBUS, 0, "unknown 62" }, + { do_bad, SIGBUS, 0, "unknown 63" }, +}; + +#define ifsr_info fsr_info diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index 2be9139a4ef3..feacf4c76712 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -1,9 +1,38 @@ #include <linux/kernel.h> #include <asm/cputype.h> +#include <asm/idmap.h> #include <asm/pgalloc.h> #include <asm/pgtable.h> +#include <asm/sections.h> +pgd_t *idmap_pgd; + +#ifdef CONFIG_ARM_LPAE +static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end, + unsigned long prot) +{ + pmd_t *pmd; + unsigned long next; + + if (pud_none_or_clear_bad(pud) || (pud_val(*pud) & L_PGD_SWAPPER)) { + pmd = pmd_alloc_one(&init_mm, addr); + if (!pmd) { + pr_warning("Failed to allocate identity pmd.\n"); + return; + } + pud_populate(&init_mm, pud, pmd); + pmd += pmd_index(addr); + } else + pmd = pmd_offset(pud, addr); + + do { + next = pmd_addr_end(addr, end); + *pmd = __pmd((addr & PMD_MASK) | prot); + flush_pmd_entry(pmd); + } while (pmd++, addr = next, addr != end); +} +#else /* !CONFIG_ARM_LPAE */ static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end, unsigned long prot) { @@ -15,6 +44,7 @@ static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end, pmd[1] = __pmd(addr); flush_pmd_entry(pmd); } +#endif /* CONFIG_ARM_LPAE */ static void idmap_add_pud(pgd_t *pgd, unsigned long addr, unsigned long end, unsigned long prot) @@ -28,11 +58,11 @@ static void idmap_add_pud(pgd_t *pgd, unsigned long addr, unsigned long end, } while (pud++, addr = next, addr != end); } -void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end) +static void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end) { unsigned long prot, next; - prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE; + prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF; if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) prot |= PMD_BIT4; @@ -43,48 +73,41 @@ void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end) } while (pgd++, addr = next, addr != end); } -#ifdef CONFIG_SMP -static void idmap_del_pmd(pud_t *pud, unsigned long addr, unsigned long end) -{ - pmd_t *pmd = pmd_offset(pud, addr); - pmd_clear(pmd); -} +extern char __idmap_text_start[], __idmap_text_end[]; -static void idmap_del_pud(pgd_t *pgd, unsigned long addr, unsigned long end) +static int __init init_static_idmap(void) { - pud_t *pud = pud_offset(pgd, addr); - unsigned long next; + phys_addr_t idmap_start, idmap_end; - do { - next = pud_addr_end(addr, end); - idmap_del_pmd(pud, addr, next); - } while (pud++, addr = next, addr != end); -} + idmap_pgd = pgd_alloc(&init_mm); + if (!idmap_pgd) + return -ENOMEM; -void identity_mapping_del(pgd_t *pgd, unsigned long addr, unsigned long end) -{ - unsigned long next; + /* Add an identity mapping for the physical address of the section. */ + idmap_start = virt_to_phys((void *)__idmap_text_start); + idmap_end = virt_to_phys((void *)__idmap_text_end); - pgd += pgd_index(addr); - do { - next = pgd_addr_end(addr, end); - idmap_del_pud(pgd, addr, next); - } while (pgd++, addr = next, addr != end); + pr_info("Setting up static identity map for 0x%llx - 0x%llx\n", + (long long)idmap_start, (long long)idmap_end); + identity_mapping_add(idmap_pgd, idmap_start, idmap_end); + + return 0; } -#endif +early_initcall(init_static_idmap); /* - * In order to soft-boot, we need to insert a 1:1 mapping in place of - * the user-mode pages. This will then ensure that we have predictable - * results when turning the mmu off + * In order to soft-boot, we need to switch to a 1:1 mapping for the + * cpu_reset functions. This will then ensure that we have predictable + * results when turning off the mmu. */ -void setup_mm_for_reboot(char mode) +void setup_mm_for_reboot(void) { - /* - * We need to access to user-mode page tables here. For kernel threads - * we don't have any user-mode mappings so we use the context that we - * "borrowed". - */ - identity_mapping_add(current->active_mm->pgd, 0, TASK_SIZE); + /* Clean and invalidate L1. */ + flush_cache_all(); + + /* Switch to the identity mapping. */ + cpu_switch_mm(idmap_pgd, &init_mm); + + /* Flush the TLB. */ local_flush_tlb_all(); } diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index fbdd12ea3a58..e34ea8adc1f9 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -20,7 +20,6 @@ #include <linux/highmem.h> #include <linux/gfp.h> #include <linux/memblock.h> -#include <linux/sort.h> #include <asm/mach-types.h> #include <asm/prom.h> @@ -32,6 +31,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/memblock.h> #include "mm.h" @@ -134,30 +134,18 @@ void show_mem(unsigned int filter) } static void __init find_limits(unsigned long *min, unsigned long *max_low, - unsigned long *max_high) + unsigned long *max_high) { struct meminfo *mi = &meminfo; int i; - *min = -1UL; - *max_low = *max_high = 0; - - for_each_bank (i, mi) { - struct membank *bank = &mi->bank[i]; - unsigned long start, end; - - start = bank_pfn_start(bank); - end = bank_pfn_end(bank); - - if (*min > start) - *min = start; - if (*max_high < end) - *max_high = end; - if (bank->highmem) - continue; - if (*max_low < end) - *max_low = end; - } + /* This assumes the meminfo array is properly sorted */ + *min = bank_pfn_start(&mi->bank[0]); + for_each_bank (i, mi) + if (mi->bank[i].highmem) + break; + *max_low = bank_pfn_end(&mi->bank[i - 1]); + *max_high = bank_pfn_end(&mi->bank[mi->nr_banks - 1]); } static void __init arm_bootmem_init(unsigned long start_pfn, @@ -319,20 +307,10 @@ static void arm_memory_present(void) } #endif -static int __init meminfo_cmp(const void *_a, const void *_b) -{ - const struct membank *a = _a, *b = _b; - long cmp = bank_pfn_start(a) - bank_pfn_start(b); - return cmp < 0 ? -1 : cmp > 0 ? 1 : 0; -} - void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) { int i; - sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL); - - memblock_init(); for (i = 0; i < mi->nr_banks; i++) memblock_add(mi->bank[i].start, mi->bank[i].size); @@ -371,7 +349,7 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) if (mdesc->reserve) mdesc->reserve(); - memblock_analyze(); + memblock_allow_resize(); memblock_dump_all(); } @@ -403,8 +381,6 @@ void __init bootmem_init(void) */ arm_bootmem_free(min, max_low, max_high); - high_memory = __va(((phys_addr_t)max_low << PAGE_SHIFT) - 1) + 1; - /* * This doesn't seem to be used by the Linux memory manager any * more, but is used by ll_rw_block. If we can get rid of it, we diff --git a/arch/arm/mm/iomap.c b/arch/arm/mm/iomap.c index 430df1a5978d..e62956e12030 100644 --- a/arch/arm/mm/iomap.c +++ b/arch/arm/mm/iomap.c @@ -35,27 +35,6 @@ EXPORT_SYMBOL(pcibios_min_mem); unsigned int pci_flags = PCI_REASSIGN_ALL_RSRC; EXPORT_SYMBOL(pci_flags); -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (!len || !start) - return NULL; - if (maxlen && len > maxlen) - len = maxlen; - if (flags & IORESOURCE_IO) - return ioport_map(start, len); - if (flags & IORESOURCE_MEM) { - if (flags & IORESOURCE_CACHEABLE) - return ioremap(start, len); - return ioremap_nocache(start, len); - } - return NULL; -} -EXPORT_SYMBOL(pci_iomap); - void pci_iounmap(struct pci_dev *dev, void __iomem *addr) { if ((unsigned long)addr >= VMALLOC_START && diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index bdb248c4f55c..80632e8d7538 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -36,12 +36,6 @@ #include <asm/mach/map.h> #include "mm.h" -/* - * Used by ioremap() and iounmap() code to mark (super)section-mapped - * I/O regions in vm_struct->flags field. - */ -#define VM_ARM_SECTION_MAPPING 0x80000000 - int ioremap_page(unsigned long virt, unsigned long phys, const struct mem_type *mtype) { @@ -64,7 +58,7 @@ void __check_kvm_seq(struct mm_struct *mm) } while (seq != init_mm.context.kvm_seq); } -#ifndef CONFIG_SMP +#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE) /* * Section support is unsafe on SMP - If you iounmap and ioremap a region, * the other CPUs will not see this change until their next context switch. @@ -79,13 +73,16 @@ static void unmap_area_sections(unsigned long virt, unsigned long size) { unsigned long addr = virt, end = virt + (size & ~(SZ_1M - 1)); pgd_t *pgd; + pud_t *pud; + pmd_t *pmdp; flush_cache_vunmap(addr, end); pgd = pgd_offset_k(addr); + pud = pud_offset(pgd, addr); + pmdp = pmd_offset(pud, addr); do { - pmd_t pmd, *pmdp = pmd_offset(pgd, addr); + pmd_t pmd = *pmdp; - pmd = *pmdp; if (!pmd_none(pmd)) { /* * Clear the PMD from the page table, and @@ -104,8 +101,8 @@ static void unmap_area_sections(unsigned long virt, unsigned long size) pte_free_kernel(&init_mm, pmd_page_vaddr(pmd)); } - addr += PGDIR_SIZE; - pgd++; + addr += PMD_SIZE; + pmdp += 2; } while (addr < end); /* @@ -124,6 +121,8 @@ remap_area_sections(unsigned long virt, unsigned long pfn, { unsigned long addr = virt, end = virt + size; pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; /* * Remove and free any PTE-based mapping, and @@ -132,17 +131,17 @@ remap_area_sections(unsigned long virt, unsigned long pfn, unmap_area_sections(virt, size); pgd = pgd_offset_k(addr); + pud = pud_offset(pgd, addr); + pmd = pmd_offset(pud, addr); do { - pmd_t *pmd = pmd_offset(pgd, addr); - pmd[0] = __pmd(__pfn_to_phys(pfn) | type->prot_sect); pfn += SZ_1M >> PAGE_SHIFT; pmd[1] = __pmd(__pfn_to_phys(pfn) | type->prot_sect); pfn += SZ_1M >> PAGE_SHIFT; flush_pmd_entry(pmd); - addr += PGDIR_SIZE; - pgd++; + addr += PMD_SIZE; + pmd += 2; } while (addr < end); return 0; @@ -154,6 +153,8 @@ remap_area_supersections(unsigned long virt, unsigned long pfn, { unsigned long addr = virt, end = virt + size; pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; /* * Remove and free any PTE-based mapping, and @@ -162,6 +163,8 @@ remap_area_supersections(unsigned long virt, unsigned long pfn, unmap_area_sections(virt, size); pgd = pgd_offset_k(virt); + pud = pud_offset(pgd, addr); + pmd = pmd_offset(pud, addr); do { unsigned long super_pmd_val, i; @@ -170,14 +173,12 @@ remap_area_supersections(unsigned long virt, unsigned long pfn, super_pmd_val |= ((pfn >> (32 - PAGE_SHIFT)) & 0xf) << 20; for (i = 0; i < 8; i++) { - pmd_t *pmd = pmd_offset(pgd, addr); - pmd[0] = __pmd(super_pmd_val); pmd[1] = __pmd(super_pmd_val); flush_pmd_entry(pmd); - addr += PGDIR_SIZE; - pgd++; + addr += PMD_SIZE; + pmd += 2; } pfn += SUPERSECTION_SIZE >> PAGE_SHIFT; @@ -195,17 +196,13 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, unsigned long addr; struct vm_struct * area; +#ifndef CONFIG_ARM_LPAE /* * High mappings must be supersection aligned */ if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK)) return NULL; - - /* - * Don't allow RAM to be mapped - this causes problems with ARMv6+ - */ - if (WARN_ON(pfn_valid(pfn))) - return NULL; +#endif type = get_mem_type(mtype); if (!type) @@ -216,12 +213,40 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, */ size = PAGE_ALIGN(offset + size); + /* + * Try to reuse one of the static mapping whenever possible. + */ + read_lock(&vmlist_lock); + for (area = vmlist; area; area = area->next) { + if (!size || (sizeof(phys_addr_t) == 4 && pfn >= 0x100000)) + break; + if (!(area->flags & VM_ARM_STATIC_MAPPING)) + continue; + if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype)) + continue; + if (__phys_to_pfn(area->phys_addr) > pfn || + __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1) + continue; + /* we can drop the lock here as we know *area is static */ + read_unlock(&vmlist_lock); + addr = (unsigned long)area->addr; + addr += __pfn_to_phys(pfn) - area->phys_addr; + return (void __iomem *) (offset + addr); + } + read_unlock(&vmlist_lock); + + /* + * Don't allow RAM to be mapped - this causes problems with ARMv6+ + */ + if (WARN_ON(pfn_valid(pfn))) + return NULL; + area = get_vm_area_caller(size, VM_IOREMAP, caller); if (!area) return NULL; addr = (unsigned long)area->addr; -#ifndef CONFIG_SMP +#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE) if (DOMAIN_IO == 0 && (((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) || cpu_is_xsc3()) && pfn >= 0x100000 && @@ -313,28 +338,34 @@ __arm_ioremap_exec(unsigned long phys_addr, size_t size, bool cached) void __iounmap(volatile void __iomem *io_addr) { void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr); -#ifndef CONFIG_SMP - struct vm_struct **p, *tmp; + struct vm_struct *vm; - /* - * If this is a section based mapping we need to handle it - * specially as the VM subsystem does not know how to handle - * such a beast. We need the lock here b/c we need to clear - * all the mappings before the area can be reclaimed - * by someone else. - */ - write_lock(&vmlist_lock); - for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) { - if ((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) { - if (tmp->flags & VM_ARM_SECTION_MAPPING) { - unmap_area_sections((unsigned long)tmp->addr, - tmp->size); - } + read_lock(&vmlist_lock); + for (vm = vmlist; vm; vm = vm->next) { + if (vm->addr > addr) + break; + if (!(vm->flags & VM_IOREMAP)) + continue; + /* If this is a static mapping we must leave it alone */ + if ((vm->flags & VM_ARM_STATIC_MAPPING) && + (vm->addr <= addr) && (vm->addr + vm->size > addr)) { + read_unlock(&vmlist_lock); + return; + } +#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE) + /* + * If this is a section based mapping we need to handle it + * specially as the VM subsystem does not know how to handle + * such a beast. + */ + if ((vm->addr == addr) && + (vm->flags & VM_ARM_SECTION_MAPPING)) { + unmap_area_sections((unsigned long)vm->addr, vm->size); break; } - } - write_unlock(&vmlist_lock); #endif + } + read_unlock(&vmlist_lock); vunmap(addr); } diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index ad7cce3bc431..70f6d3ea4834 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -21,6 +21,20 @@ const struct mem_type *get_mem_type(unsigned int type); extern void __flush_dcache_page(struct address_space *mapping, struct page *page); +/* + * ARM specific vm_struct->flags bits. + */ + +/* (super)section-mapped I/O regions used by ioremap()/iounmap() */ +#define VM_ARM_SECTION_MAPPING 0x80000000 + +/* permanent static mappings from iotable_init() */ +#define VM_ARM_STATIC_MAPPING 0x40000000 + +/* mapping type (attributes) for permanent static mappings */ +#define VM_ARM_MTYPE(mt) ((mt) << 20) +#define VM_ARM_MTYPE_MASK (0x1f << 20) + #endif #ifdef CONFIG_ZONE_DMA diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 44b628e4d6ea..ce8cb1970d7a 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -11,10 +11,49 @@ #include <linux/random.h> #include <asm/cachetype.h> +static inline unsigned long COLOUR_ALIGN_DOWN(unsigned long addr, + unsigned long pgoff) +{ + unsigned long base = addr & ~(SHMLBA-1); + unsigned long off = (pgoff << PAGE_SHIFT) & (SHMLBA-1); + + if (base + off <= addr) + return base + off; + + return base - off; +} + #define COLOUR_ALIGN(addr,pgoff) \ ((((addr)+SHMLBA-1)&~(SHMLBA-1)) + \ (((pgoff)<<PAGE_SHIFT) & (SHMLBA-1))) +/* gap between mmap and stack */ +#define MIN_GAP (128*1024*1024UL) +#define MAX_GAP ((TASK_SIZE)/6*5) + +static int mmap_is_legacy(void) +{ + if (current->personality & ADDR_COMPAT_LAYOUT) + return 1; + + if (rlimit(RLIMIT_STACK) == RLIM_INFINITY) + return 1; + + return sysctl_legacy_va_layout; +} + +static unsigned long mmap_base(unsigned long rnd) +{ + unsigned long gap = rlimit(RLIMIT_STACK); + + if (gap < MIN_GAP) + gap = MIN_GAP; + else if (gap > MAX_GAP) + gap = MAX_GAP; + + return PAGE_ALIGN(TASK_SIZE - gap - rnd); +} + /* * We need to ensure that shared mappings are correctly aligned to * avoid aliasing issues with VIPT caches. We need to ensure that @@ -68,13 +107,9 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, if (len > mm->cached_hole_size) { start_addr = addr = mm->free_area_cache; } else { - start_addr = addr = TASK_UNMAPPED_BASE; + start_addr = addr = mm->mmap_base; mm->cached_hole_size = 0; } - /* 8 bits of randomness in 20 address space bits */ - if ((current->flags & PF_RANDOMIZE) && - !(current->personality & ADDR_NO_RANDOMIZE)) - addr += (get_random_int() % (1 << 8)) << PAGE_SHIFT; full_search: if (do_align) @@ -111,6 +146,134 @@ full_search: } } +unsigned long +arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, + const unsigned long len, const unsigned long pgoff, + const unsigned long flags) +{ + struct vm_area_struct *vma; + struct mm_struct *mm = current->mm; + unsigned long addr = addr0; + int do_align = 0; + int aliasing = cache_is_vipt_aliasing(); + + /* + * We only need to do colour alignment if either the I or D + * caches alias. + */ + if (aliasing) + do_align = filp || (flags & MAP_SHARED); + + /* requested length too big for entire address space */ + if (len > TASK_SIZE) + return -ENOMEM; + + if (flags & MAP_FIXED) { + if (aliasing && flags & MAP_SHARED && + (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1)) + return -EINVAL; + return addr; + } + + /* requesting a specific address */ + if (addr) { + if (do_align) + addr = COLOUR_ALIGN(addr, pgoff); + else + addr = PAGE_ALIGN(addr); + vma = find_vma(mm, addr); + if (TASK_SIZE - len >= addr && + (!vma || addr + len <= vma->vm_start)) + return addr; + } + + /* check if free_area_cache is useful for us */ + if (len <= mm->cached_hole_size) { + mm->cached_hole_size = 0; + mm->free_area_cache = mm->mmap_base; + } + + /* either no address requested or can't fit in requested address hole */ + addr = mm->free_area_cache; + if (do_align) { + unsigned long base = COLOUR_ALIGN_DOWN(addr - len, pgoff); + addr = base + len; + } + + /* make sure it can fit in the remaining address space */ + if (addr > len) { + vma = find_vma(mm, addr-len); + if (!vma || addr <= vma->vm_start) + /* remember the address as a hint for next time */ + return (mm->free_area_cache = addr-len); + } + + if (mm->mmap_base < len) + goto bottomup; + + addr = mm->mmap_base - len; + if (do_align) + addr = COLOUR_ALIGN_DOWN(addr, pgoff); + + do { + /* + * Lookup failure means no vma is above this address, + * else if new region fits below vma->vm_start, + * return with success: + */ + vma = find_vma(mm, addr); + if (!vma || addr+len <= vma->vm_start) + /* remember the address as a hint for next time */ + return (mm->free_area_cache = addr); + + /* remember the largest hole we saw so far */ + if (addr + mm->cached_hole_size < vma->vm_start) + mm->cached_hole_size = vma->vm_start - addr; + + /* try just below the current vma->vm_start */ + addr = vma->vm_start - len; + if (do_align) + addr = COLOUR_ALIGN_DOWN(addr, pgoff); + } while (len < vma->vm_start); + +bottomup: + /* + * A failed mmap() very likely causes application failure, + * so fall back to the bottom-up function here. This scenario + * can happen with large stack limits and large mmap() + * allocations. + */ + mm->cached_hole_size = ~0UL; + mm->free_area_cache = TASK_UNMAPPED_BASE; + addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags); + /* + * Restore the topdown base: + */ + mm->free_area_cache = mm->mmap_base; + mm->cached_hole_size = ~0UL; + + return addr; +} + +void arch_pick_mmap_layout(struct mm_struct *mm) +{ + unsigned long random_factor = 0UL; + + /* 8 bits of randomness in 20 address space bits */ + if ((current->flags & PF_RANDOMIZE) && + !(current->personality & ADDR_NO_RANDOMIZE)) + random_factor = (get_random_int() % (1 << 8)) << PAGE_SHIFT; + + if (mmap_is_legacy()) { + mm->mmap_base = TASK_UNMAPPED_BASE + random_factor; + mm->get_unmapped_area = arch_get_unmapped_area; + mm->unmap_area = arch_unmap_area; + } else { + mm->mmap_base = mmap_base(random_factor); + mm->get_unmapped_area = arch_get_unmapped_area_topdown; + mm->unmap_area = arch_unmap_area_topdown; + } +} /* * You really shouldn't be using read() or write() on /dev/mem. This diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index dc8c550e6cbd..94c5a0c94f5e 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -15,6 +15,7 @@ #include <linux/nodemask.h> #include <linux/memblock.h> #include <linux/fs.h> +#include <linux/vmalloc.h> #include <asm/cputype.h> #include <asm/sections.h> @@ -150,6 +151,7 @@ static int __init early_nowrite(char *__unused) } early_param("nowb", early_nowrite); +#ifndef CONFIG_ARM_LPAE static int __init early_ecc(char *p) { if (memcmp(p, "on", 2) == 0) @@ -159,6 +161,7 @@ static int __init early_ecc(char *p) return 0; } early_param("ecc", early_ecc); +#endif static int __init noalign_setup(char *__unused) { @@ -228,10 +231,12 @@ static struct mem_type mem_types[] = { .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN, .domain = DOMAIN_KERNEL, }, +#ifndef CONFIG_ARM_LPAE [MT_MINICLEAN] = { .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_MINICACHE, .domain = DOMAIN_KERNEL, }, +#endif [MT_LOW_VECTORS] = { .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_RDONLY, @@ -429,6 +434,7 @@ static void __init build_mem_type_table(void) * ARMv6 and above have extended page tables. */ if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) { +#ifndef CONFIG_ARM_LPAE /* * Mark cache clean areas and XIP ROM read only * from SVC mode and no access from userspace. @@ -436,6 +442,7 @@ static void __init build_mem_type_table(void) mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; +#endif if (is_smp()) { /* @@ -474,6 +481,18 @@ static void __init build_mem_type_table(void) mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE; } +#ifdef CONFIG_ARM_LPAE + /* + * Do not generate access flag faults for the kernel mappings. + */ + for (i = 0; i < ARRAY_SIZE(mem_types); i++) { + mem_types[i].prot_pte |= PTE_EXT_AF; + mem_types[i].prot_sect |= PMD_SECT_AF; + } + kern_pgprot |= PTE_EXT_AF; + vecs_pgprot |= PTE_EXT_AF; +#endif + for (i = 0; i < 16; i++) { unsigned long v = pgprot_val(protection_map[i]); protection_map[i] = __pgprot(v | user_pgprot); @@ -529,13 +548,18 @@ EXPORT_SYMBOL(phys_mem_access_prot); #define vectors_base() (vectors_high() ? 0xffff0000 : 0) -static void __init *early_alloc(unsigned long sz) +static void __init *early_alloc_aligned(unsigned long sz, unsigned long align) { - void *ptr = __va(memblock_alloc(sz, sz)); + void *ptr = __va(memblock_alloc(sz, align)); memset(ptr, 0, sz); return ptr; } +static void __init *early_alloc(unsigned long sz) +{ + return early_alloc_aligned(sz, sz); +} + static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot) { if (pmd_none(*pmd)) { @@ -572,8 +596,10 @@ static void __init alloc_init_section(pud_t *pud, unsigned long addr, if (((addr | end | phys) & ~SECTION_MASK) == 0) { pmd_t *p = pmd; +#ifndef CONFIG_ARM_LPAE if (addr & SECTION_SIZE) pmd++; +#endif do { *pmd = __pmd(phys | type->prot_sect); @@ -603,6 +629,7 @@ static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end, } while (pud++, addr = next, addr != end); } +#ifndef CONFIG_ARM_LPAE static void __init create_36bit_mapping(struct map_desc *md, const struct mem_type *type) { @@ -662,6 +689,7 @@ static void __init create_36bit_mapping(struct map_desc *md, pgd += SUPERSECTION_SIZE >> PGDIR_SHIFT; } while (addr != end); } +#endif /* !CONFIG_ARM_LPAE */ /* * Create the page directory entries and any necessary @@ -685,14 +713,16 @@ static void __init create_mapping(struct map_desc *md) } if ((md->type == MT_DEVICE || md->type == MT_ROM) && - md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) { + md->virtual >= PAGE_OFFSET && + (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) { printk(KERN_WARNING "BUG: mapping for 0x%08llx" - " at 0x%08lx overlaps vmalloc space\n", + " at 0x%08lx out of vmalloc space\n", (long long)__pfn_to_phys((u64)md->pfn), md->virtual); } type = &mem_types[md->type]; +#ifndef CONFIG_ARM_LPAE /* * Catch 36-bit addresses */ @@ -700,6 +730,7 @@ static void __init create_mapping(struct map_desc *md) create_36bit_mapping(md, type); return; } +#endif addr = md->virtual & PAGE_MASK; phys = __pfn_to_phys(md->pfn); @@ -729,18 +760,33 @@ static void __init create_mapping(struct map_desc *md) */ void __init iotable_init(struct map_desc *io_desc, int nr) { - int i; + struct map_desc *md; + struct vm_struct *vm; + + if (!nr) + return; - for (i = 0; i < nr; i++) - create_mapping(io_desc + i); + vm = early_alloc_aligned(sizeof(*vm) * nr, __alignof__(*vm)); + + for (md = io_desc; nr; md++, nr--) { + create_mapping(md); + vm->addr = (void *)(md->virtual & PAGE_MASK); + vm->size = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK)); + vm->phys_addr = __pfn_to_phys(md->pfn); + vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; + vm->flags |= VM_ARM_MTYPE(md->type); + vm->caller = iotable_init; + vm_area_add_early(vm++); + } } -static void * __initdata vmalloc_min = (void *)(VMALLOC_END - SZ_128M); +static void * __initdata vmalloc_min = + (void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET); /* * vmalloc=size forces the vmalloc area to be exactly 'size' * bytes. This can be used to increase (or decrease) the vmalloc - * area - the default is 128m. + * area - the default is 240m. */ static int __init early_vmalloc(char *arg) { @@ -775,6 +821,9 @@ void __init sanity_check_meminfo(void) struct membank *bank = &meminfo.bank[j]; *bank = meminfo.bank[i]; + if (bank->start > ULONG_MAX) + highmem = 1; + #ifdef CONFIG_HIGHMEM if (__va(bank->start) >= vmalloc_min || __va(bank->start) < (void *)PAGE_OFFSET) @@ -786,7 +835,7 @@ void __init sanity_check_meminfo(void) * Split those memory banks which are partially overlapping * the vmalloc area greatly simplifying things later. */ - if (__va(bank->start) < vmalloc_min && + if (!highmem && __va(bank->start) < vmalloc_min && bank->size > vmalloc_min - __va(bank->start)) { if (meminfo.nr_banks >= NR_BANKS) { printk(KERN_CRIT "NR_BANKS too low, " @@ -807,6 +856,17 @@ void __init sanity_check_meminfo(void) bank->highmem = highmem; /* + * Highmem banks not allowed with !CONFIG_HIGHMEM. + */ + if (highmem) { + printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx " + "(!CONFIG_HIGHMEM).\n", + (unsigned long long)bank->start, + (unsigned long long)bank->start + bank->size - 1); + continue; + } + + /* * Check whether this memory bank would entirely overlap * the vmalloc area. */ @@ -860,6 +920,7 @@ void __init sanity_check_meminfo(void) } #endif meminfo.nr_banks = j; + high_memory = __va(lowmem_limit - 1) + 1; memblock_set_current_limit(lowmem_limit); } @@ -890,14 +951,20 @@ static inline void prepare_page_table(void) /* * Clear out all the kernel space mappings, except for the first - * memory bank, up to the end of the vmalloc region. + * memory bank, up to the vmalloc region. */ for (addr = __phys_to_virt(end); - addr < VMALLOC_END; addr += PMD_SIZE) + addr < VMALLOC_START; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); } +#ifdef CONFIG_ARM_LPAE +/* the first page is reserved for pgd */ +#define SWAPPER_PG_DIR_SIZE (PAGE_SIZE + \ + PTRS_PER_PGD * PTRS_PER_PMD * sizeof(pmd_t)) +#else #define SWAPPER_PG_DIR_SIZE (PTRS_PER_PGD * sizeof(pgd_t)) +#endif /* * Reserve the special regions of memory @@ -920,8 +987,8 @@ void __init arm_mm_memblock_reserve(void) } /* - * Set up device the mappings. Since we clear out the page tables for all - * mappings above VMALLOC_END, we will remove any debug device mappings. + * Set up the device mappings. Since we clear out the page tables for all + * mappings above VMALLOC_START, we will remove any debug device mappings. * This means you have to be careful how you debug this function, or any * called function. This means you can't use any function or debugging * method which may touch any device, otherwise the kernel _will_ crash. @@ -936,7 +1003,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) */ vectors_page = early_alloc(PAGE_SIZE); - for (addr = VMALLOC_END; addr; addr += PMD_SIZE) + for (addr = VMALLOC_START; addr; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); /* diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 941a98c9e8aa..4fc6794cca4b 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -29,6 +29,8 @@ void __init arm_mm_memblock_reserve(void) void __init sanity_check_meminfo(void) { + phys_addr_t end = bank_phys_end(&meminfo.bank[meminfo.nr_banks - 1]); + high_memory = __va(end - 1) + 1; } /* @@ -43,7 +45,7 @@ void __init paging_init(struct machine_desc *mdesc) /* * We don't need to do anything here for nommu machines. */ -void setup_mm_for_reboot(char mode) +void setup_mm_for_reboot(void) { } diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index b2027c154b2a..a3e78ccabd65 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -10,6 +10,7 @@ #include <linux/mm.h> #include <linux/gfp.h> #include <linux/highmem.h> +#include <linux/slab.h> #include <asm/pgalloc.h> #include <asm/page.h> @@ -17,6 +18,14 @@ #include "mm.h" +#ifdef CONFIG_ARM_LPAE +#define __pgd_alloc() kmalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL) +#define __pgd_free(pgd) kfree(pgd) +#else +#define __pgd_alloc() (pgd_t *)__get_free_pages(GFP_KERNEL, 2) +#define __pgd_free(pgd) free_pages((unsigned long)pgd, 2) +#endif + /* * need to get a 16k page for level 1 */ @@ -27,7 +36,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm) pmd_t *new_pmd, *init_pmd; pte_t *new_pte, *init_pte; - new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 2); + new_pgd = __pgd_alloc(); if (!new_pgd) goto no_pgd; @@ -42,10 +51,25 @@ pgd_t *pgd_alloc(struct mm_struct *mm) clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t)); +#ifdef CONFIG_ARM_LPAE + /* + * Allocate PMD table for modules and pkmap mappings. + */ + new_pud = pud_alloc(mm, new_pgd + pgd_index(MODULES_VADDR), + MODULES_VADDR); + if (!new_pud) + goto no_pud; + + new_pmd = pmd_alloc(mm, new_pud, 0); + if (!new_pmd) + goto no_pmd; +#endif + if (!vectors_high()) { /* * On ARM, first page must always be allocated since it - * contains the machine vectors. + * contains the machine vectors. The vectors are always high + * with LPAE. */ new_pud = pud_alloc(mm, new_pgd, 0); if (!new_pud) @@ -74,7 +98,7 @@ no_pte: no_pmd: pud_free(mm, new_pud); no_pud: - free_pages((unsigned long)new_pgd, 2); + __pgd_free(new_pgd); no_pgd: return NULL; } @@ -111,5 +135,24 @@ no_pud: pgd_clear(pgd); pud_free(mm, pud); no_pgd: - free_pages((unsigned long) pgd_base, 2); +#ifdef CONFIG_ARM_LPAE + /* + * Free modules/pkmap or identity pmd tables. + */ + for (pgd = pgd_base; pgd < pgd_base + PTRS_PER_PGD; pgd++) { + if (pgd_none_or_clear_bad(pgd)) + continue; + if (pgd_val(*pgd) & L_PGD_SWAPPER) + continue; + pud = pud_offset(pgd, 0); + if (pud_none_or_clear_bad(pud)) + continue; + pmd = pmd_offset(pud, 0); + pud_clear(pud); + pmd_free(mm, pmd); + pgd_clear(pgd); + pud_free(mm, pud); + } +#endif + __pgd_free(pgd_base); } diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 67469665d47a..234951345eb3 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -95,6 +95,7 @@ ENTRY(cpu_arm1020_proc_fin) * loc: location to jump to for soft reset */ .align 5 + .pushsection .idmap.text, "ax" ENTRY(cpu_arm1020_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches @@ -107,6 +108,8 @@ ENTRY(cpu_arm1020_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 +ENDPROC(cpu_arm1020_reset) + .popsection /* * cpu_arm1020_do_idle() diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 4251421c0ed5..c244b06caac9 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -95,6 +95,7 @@ ENTRY(cpu_arm1020e_proc_fin) * loc: location to jump to for soft reset */ .align 5 + .pushsection .idmap.text, "ax" ENTRY(cpu_arm1020e_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches @@ -107,6 +108,8 @@ ENTRY(cpu_arm1020e_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 +ENDPROC(cpu_arm1020e_reset) + .popsection /* * cpu_arm1020e_do_idle() diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index d283cf3d06e3..38fe22efd18f 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -84,6 +84,7 @@ ENTRY(cpu_arm1022_proc_fin) * loc: location to jump to for soft reset */ .align 5 + .pushsection .idmap.text, "ax" ENTRY(cpu_arm1022_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches @@ -96,6 +97,8 @@ ENTRY(cpu_arm1022_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 +ENDPROC(cpu_arm1022_reset) + .popsection /* * cpu_arm1022_do_idle() diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 678a1ceafed2..3eb9c3c26c75 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -84,6 +84,7 @@ ENTRY(cpu_arm1026_proc_fin) * loc: location to jump to for soft reset */ .align 5 + .pushsection .idmap.text, "ax" ENTRY(cpu_arm1026_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches @@ -96,6 +97,8 @@ ENTRY(cpu_arm1026_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 +ENDPROC(cpu_arm1026_reset) + .popsection /* * cpu_arm1026_do_idle() diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index e5b974cddac3..4fbeb5b8e6c2 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -225,6 +225,7 @@ ENTRY(cpu_arm7_set_pte_ext) * Params : r0 = address to jump to * Notes : This sets up everything for a reset */ + .pushsection .idmap.text, "ax" ENTRY(cpu_arm6_reset) ENTRY(cpu_arm7_reset) mov r1, #0 @@ -235,6 +236,9 @@ ENTRY(cpu_arm7_reset) mov r1, #0x30 mcr p15, 0, r1, c1, c0, 0 @ turn off MMU etc mov pc, r0 +ENDPROC(cpu_arm6_reset) +ENDPROC(cpu_arm7_reset) + .popsection __CPUINIT diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 55f4e290665a..0ac908c7ade1 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -101,6 +101,7 @@ ENTRY(cpu_arm720_set_pte_ext) * Params : r0 = address to jump to * Notes : This sets up everything for a reset */ + .pushsection .idmap.text, "ax" ENTRY(cpu_arm720_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate cache @@ -112,6 +113,8 @@ ENTRY(cpu_arm720_reset) bic ip, ip, #0x2100 @ ..v....s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 +ENDPROC(cpu_arm720_reset) + .popsection __CPUINIT diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index 4506be3adda6..dc5de5d53f20 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -49,6 +49,7 @@ ENTRY(cpu_arm740_proc_fin) * Params : r0 = address to jump to * Notes : This sets up everything for a reset */ + .pushsection .idmap.text, "ax" ENTRY(cpu_arm740_reset) mov ip, #0 mcr p15, 0, ip, c7, c0, 0 @ invalidate cache @@ -56,6 +57,8 @@ ENTRY(cpu_arm740_reset) bic ip, ip, #0x0000000c @ ............wc.. mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 +ENDPROC(cpu_arm740_reset) + .popsection __CPUINIT diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index 7e0e1fe4ed4d..6ddea3e464bd 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -45,8 +45,11 @@ ENTRY(cpu_arm7tdmi_proc_fin) * Params : loc(r0) address to jump to * Purpose : Sets up everything for a reset and jump to the location for soft reset. */ + .pushsection .idmap.text, "ax" ENTRY(cpu_arm7tdmi_reset) mov pc, r0 +ENDPROC(cpu_arm7tdmi_reset) + .popsection __CPUINIT diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 88fb3d9e0640..cb941ae95f66 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -85,6 +85,7 @@ ENTRY(cpu_arm920_proc_fin) * loc: location to jump to for soft reset */ .align 5 + .pushsection .idmap.text, "ax" ENTRY(cpu_arm920_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches @@ -97,6 +98,8 @@ ENTRY(cpu_arm920_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 +ENDPROC(cpu_arm920_reset) + .popsection /* * cpu_arm920_do_idle() diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 490e18833857..4ec0e074dd55 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -87,6 +87,7 @@ ENTRY(cpu_arm922_proc_fin) * loc: location to jump to for soft reset */ .align 5 + .pushsection .idmap.text, "ax" ENTRY(cpu_arm922_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches @@ -99,6 +100,8 @@ ENTRY(cpu_arm922_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 +ENDPROC(cpu_arm922_reset) + .popsection /* * cpu_arm922_do_idle() diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 51d494be057e..9dccd9a365b3 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -108,6 +108,7 @@ ENTRY(cpu_arm925_proc_fin) * loc: location to jump to for soft reset */ .align 5 + .pushsection .idmap.text, "ax" ENTRY(cpu_arm925_reset) /* Send software reset to MPU and DSP */ mov ip, #0xff000000 @@ -115,6 +116,8 @@ ENTRY(cpu_arm925_reset) orr ip, ip, #0x0000ce00 mov r4, #1 strh r4, [ip, #0x10] +ENDPROC(cpu_arm925_reset) + .popsection mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 9f8fd91f918a..820259b81a1f 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -77,6 +77,7 @@ ENTRY(cpu_arm926_proc_fin) * loc: location to jump to for soft reset */ .align 5 + .pushsection .idmap.text, "ax" ENTRY(cpu_arm926_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches @@ -89,6 +90,8 @@ ENTRY(cpu_arm926_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 +ENDPROC(cpu_arm926_reset) + .popsection /* * cpu_arm926_do_idle() diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index ac750d506153..9fdc0a170974 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -48,6 +48,7 @@ ENTRY(cpu_arm940_proc_fin) * Params : r0 = address to jump to * Notes : This sets up everything for a reset */ + .pushsection .idmap.text, "ax" ENTRY(cpu_arm940_reset) mov ip, #0 mcr p15, 0, ip, c7, c5, 0 @ flush I cache @@ -58,6 +59,8 @@ ENTRY(cpu_arm940_reset) bic ip, ip, #0x00001000 @ i-cache mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 +ENDPROC(cpu_arm940_reset) + .popsection /* * cpu_arm940_do_idle() diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index 683af3a182b7..f684cfedcca9 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -55,6 +55,7 @@ ENTRY(cpu_arm946_proc_fin) * Params : r0 = address to jump to * Notes : This sets up everything for a reset */ + .pushsection .idmap.text, "ax" ENTRY(cpu_arm946_reset) mov ip, #0 mcr p15, 0, ip, c7, c5, 0 @ flush I cache @@ -65,6 +66,8 @@ ENTRY(cpu_arm946_reset) bic ip, ip, #0x00001000 @ i-cache mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 +ENDPROC(cpu_arm946_reset) + .popsection /* * cpu_arm946_do_idle() diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 2120f9e2af7f..8881391dfb9e 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -45,8 +45,11 @@ ENTRY(cpu_arm9tdmi_proc_fin) * Params : loc(r0) address to jump to * Purpose : Sets up everything for a reset and jump to the location for soft reset. */ + .pushsection .idmap.text, "ax" ENTRY(cpu_arm9tdmi_reset) mov pc, r0 +ENDPROC(cpu_arm9tdmi_reset) + .popsection __CPUINIT diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index 4c7a5710472b..272558a133a3 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -57,6 +57,7 @@ ENTRY(cpu_fa526_proc_fin) * loc: location to jump to for soft reset */ .align 4 + .pushsection .idmap.text, "ax" ENTRY(cpu_fa526_reset) /* TODO: Use CP8 if possible... */ mov ip, #0 @@ -73,6 +74,8 @@ ENTRY(cpu_fa526_reset) nop nop mov pc, r0 +ENDPROC(cpu_fa526_reset) + .popsection /* * cpu_fa526_do_idle() diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index 8a6c2f78c1c3..ba3c500584ac 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -98,6 +98,7 @@ ENTRY(cpu_feroceon_proc_fin) * loc: location to jump to for soft reset */ .align 5 + .pushsection .idmap.text, "ax" ENTRY(cpu_feroceon_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches @@ -110,6 +111,8 @@ ENTRY(cpu_feroceon_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 +ENDPROC(cpu_feroceon_reset) + .popsection /* * cpu_feroceon_do_idle() diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index 307a4def8d3a..2d8ff3ad86d3 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -91,8 +91,9 @@ #if L_PTE_SHARED != PTE_EXT_SHARED #error PTE shared bit mismatch #endif -#if (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\ - L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED +#if !defined (CONFIG_ARM_LPAE) && \ + (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\ + L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED #error Invalid Linux PTE bit settings #endif #endif /* CONFIG_MMU */ diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index db52b0fb14a0..cdfedc5b8ad8 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -69,6 +69,7 @@ ENTRY(cpu_mohawk_proc_fin) * (same as arm926) */ .align 5 + .pushsection .idmap.text, "ax" ENTRY(cpu_mohawk_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches @@ -79,6 +80,8 @@ ENTRY(cpu_mohawk_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 +ENDPROC(cpu_mohawk_reset) + .popsection /* * cpu_mohawk_do_idle() diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index d50ada26edd6..775d70fba937 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -62,6 +62,7 @@ ENTRY(cpu_sa110_proc_fin) * loc: location to jump to for soft reset */ .align 5 + .pushsection .idmap.text, "ax" ENTRY(cpu_sa110_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches @@ -74,6 +75,8 @@ ENTRY(cpu_sa110_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 +ENDPROC(cpu_sa110_reset) + .popsection /* * cpu_sa110_do_idle(type) diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 7d91545d089b..3aa0da11fd84 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -70,6 +70,7 @@ ENTRY(cpu_sa1100_proc_fin) * loc: location to jump to for soft reset */ .align 5 + .pushsection .idmap.text, "ax" ENTRY(cpu_sa1100_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches @@ -82,6 +83,8 @@ ENTRY(cpu_sa1100_reset) bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 +ENDPROC(cpu_sa1100_reset) + .popsection /* * cpu_sa1100_do_idle(type) diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index d061d2fa5506..5900cd520e84 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -55,6 +55,7 @@ ENTRY(cpu_v6_proc_fin) * - loc - location to jump to for soft reset */ .align 5 + .pushsection .idmap.text, "ax" ENTRY(cpu_v6_reset) mrc p15, 0, r1, c1, c0, 0 @ ctrl register bic r1, r1, #0x1 @ ...............m @@ -62,6 +63,8 @@ ENTRY(cpu_v6_reset) mov r1, #0 mcr p15, 0, r1, c7, c5, 4 @ ISB mov pc, r0 +ENDPROC(cpu_v6_reset) + .popsection /* * cpu_v6_do_idle() diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S new file mode 100644 index 000000000000..3a4b3e7b888c --- /dev/null +++ b/arch/arm/mm/proc-v7-2level.S @@ -0,0 +1,171 @@ +/* + * arch/arm/mm/proc-v7-2level.S + * + * Copyright (C) 2001 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define TTB_S (1 << 1) +#define TTB_RGN_NC (0 << 3) +#define TTB_RGN_OC_WBWA (1 << 3) +#define TTB_RGN_OC_WT (2 << 3) +#define TTB_RGN_OC_WB (3 << 3) +#define TTB_NOS (1 << 5) +#define TTB_IRGN_NC ((0 << 0) | (0 << 6)) +#define TTB_IRGN_WBWA ((0 << 0) | (1 << 6)) +#define TTB_IRGN_WT ((1 << 0) | (0 << 6)) +#define TTB_IRGN_WB ((1 << 0) | (1 << 6)) + +/* PTWs cacheable, inner WB not shareable, outer WB not shareable */ +#define TTB_FLAGS_UP TTB_IRGN_WB|TTB_RGN_OC_WB +#define PMD_FLAGS_UP PMD_SECT_WB + +/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */ +#define TTB_FLAGS_SMP TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA +#define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S + +/* + * cpu_v7_switch_mm(pgd_phys, tsk) + * + * Set the translation table base pointer to be pgd_phys + * + * - pgd_phys - physical address of new TTB + * + * It is assumed that: + * - we are not using split page tables + */ +ENTRY(cpu_v7_switch_mm) +#ifdef CONFIG_MMU + mov r2, #0 + ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id + ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP) + ALT_UP(orr r0, r0, #TTB_FLAGS_UP) +#ifdef CONFIG_ARM_ERRATA_430973 + mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB +#endif +#ifdef CONFIG_ARM_ERRATA_754322 + dsb +#endif + mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID + isb +1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 + isb +#ifdef CONFIG_ARM_ERRATA_754322 + dsb +#endif + mcr p15, 0, r1, c13, c0, 1 @ set context ID + isb +#endif + mov pc, lr +ENDPROC(cpu_v7_switch_mm) + +/* + * cpu_v7_set_pte_ext(ptep, pte) + * + * Set a level 2 translation table entry. + * + * - ptep - pointer to level 2 translation table entry + * (hardware version is stored at +2048 bytes) + * - pte - PTE value to store + * - ext - value for extended PTE bits + */ +ENTRY(cpu_v7_set_pte_ext) +#ifdef CONFIG_MMU + str r1, [r0] @ linux version + + bic r3, r1, #0x000003f0 + bic r3, r3, #PTE_TYPE_MASK + orr r3, r3, r2 + orr r3, r3, #PTE_EXT_AP0 | 2 + + tst r1, #1 << 4 + orrne r3, r3, #PTE_EXT_TEX(1) + + eor r1, r1, #L_PTE_DIRTY + tst r1, #L_PTE_RDONLY | L_PTE_DIRTY + orrne r3, r3, #PTE_EXT_APX + + tst r1, #L_PTE_USER + orrne r3, r3, #PTE_EXT_AP1 +#ifdef CONFIG_CPU_USE_DOMAINS + @ allow kernel read/write access to read-only user pages + tstne r3, #PTE_EXT_APX + bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0 +#endif + + tst r1, #L_PTE_XN + orrne r3, r3, #PTE_EXT_XN + + tst r1, #L_PTE_YOUNG + tstne r1, #L_PTE_PRESENT + moveq r3, #0 + + ARM( str r3, [r0, #2048]! ) + THUMB( add r0, r0, #2048 ) + THUMB( str r3, [r0] ) + mcr p15, 0, r0, c7, c10, 1 @ flush_pte +#endif + mov pc, lr +ENDPROC(cpu_v7_set_pte_ext) + + /* + * Memory region attributes with SCTLR.TRE=1 + * + * n = TEX[0],C,B + * TR = PRRR[2n+1:2n] - memory type + * IR = NMRR[2n+1:2n] - inner cacheable property + * OR = NMRR[2n+17:2n+16] - outer cacheable property + * + * n TR IR OR + * UNCACHED 000 00 + * BUFFERABLE 001 10 00 00 + * WRITETHROUGH 010 10 10 10 + * WRITEBACK 011 10 11 11 + * reserved 110 + * WRITEALLOC 111 10 01 01 + * DEV_SHARED 100 01 + * DEV_NONSHARED 100 01 + * DEV_WC 001 10 + * DEV_CACHED 011 10 + * + * Other attributes: + * + * DS0 = PRRR[16] = 0 - device shareable property + * DS1 = PRRR[17] = 1 - device shareable property + * NS0 = PRRR[18] = 0 - normal shareable property + * NS1 = PRRR[19] = 1 - normal shareable property + * NOS = PRRR[24+n] = 1 - not outer shareable + */ +.equ PRRR, 0xff0a81a8 +.equ NMRR, 0x40e040e0 + + /* + * Macro for setting up the TTBRx and TTBCR registers. + * - \ttb0 and \ttb1 updated with the corresponding flags. + */ + .macro v7_ttb_setup, zero, ttbr0, ttbr1, tmp + mcr p15, 0, \zero, c2, c0, 2 @ TTB control register + ALT_SMP(orr \ttbr0, \ttbr0, #TTB_FLAGS_SMP) + ALT_UP(orr \ttbr0, \ttbr0, #TTB_FLAGS_UP) + ALT_SMP(orr \ttbr1, \ttbr1, #TTB_FLAGS_SMP) + ALT_UP(orr \ttbr1, \ttbr1, #TTB_FLAGS_UP) + mcr p15, 0, \ttbr1, c2, c0, 1 @ load TTB1 + .endm + + __CPUINIT + + /* AT + * TFR EV X F I D LR S + * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM + * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced + * 1 0 110 0011 1100 .111 1101 < we want + */ + .align 2 + .type v7_crval, #object +v7_crval: + crval clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c + + .previous diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S new file mode 100644 index 000000000000..8de0f1dd1549 --- /dev/null +++ b/arch/arm/mm/proc-v7-3level.S @@ -0,0 +1,150 @@ +/* + * arch/arm/mm/proc-v7-3level.S + * + * Copyright (C) 2001 Deep Blue Solutions Ltd. + * Copyright (C) 2011 ARM Ltd. + * Author: Catalin Marinas <catalin.marinas@arm.com> + * based on arch/arm/mm/proc-v7-2level.S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define TTB_IRGN_NC (0 << 8) +#define TTB_IRGN_WBWA (1 << 8) +#define TTB_IRGN_WT (2 << 8) +#define TTB_IRGN_WB (3 << 8) +#define TTB_RGN_NC (0 << 10) +#define TTB_RGN_OC_WBWA (1 << 10) +#define TTB_RGN_OC_WT (2 << 10) +#define TTB_RGN_OC_WB (3 << 10) +#define TTB_S (3 << 12) +#define TTB_EAE (1 << 31) + +/* PTWs cacheable, inner WB not shareable, outer WB not shareable */ +#define TTB_FLAGS_UP (TTB_IRGN_WB|TTB_RGN_OC_WB) +#define PMD_FLAGS_UP (PMD_SECT_WB) + +/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */ +#define TTB_FLAGS_SMP (TTB_IRGN_WBWA|TTB_S|TTB_RGN_OC_WBWA) +#define PMD_FLAGS_SMP (PMD_SECT_WBWA|PMD_SECT_S) + +/* + * cpu_v7_switch_mm(pgd_phys, tsk) + * + * Set the translation table base pointer to be pgd_phys (physical address of + * the new TTB). + */ +ENTRY(cpu_v7_switch_mm) +#ifdef CONFIG_MMU + ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id + and r3, r1, #0xff + mov r3, r3, lsl #(48 - 32) @ ASID + mcrr p15, 0, r0, r3, c2 @ set TTB 0 + isb +#endif + mov pc, lr +ENDPROC(cpu_v7_switch_mm) + +/* + * cpu_v7_set_pte_ext(ptep, pte) + * + * Set a level 2 translation table entry. + * - ptep - pointer to level 3 translation table entry + * - pte - PTE value to store (64-bit in r2 and r3) + */ +ENTRY(cpu_v7_set_pte_ext) +#ifdef CONFIG_MMU + tst r2, #L_PTE_PRESENT + beq 1f + tst r3, #1 << (55 - 32) @ L_PTE_DIRTY + orreq r2, #L_PTE_RDONLY +1: strd r2, r3, [r0] + mcr p15, 0, r0, c7, c10, 1 @ flush_pte +#endif + mov pc, lr +ENDPROC(cpu_v7_set_pte_ext) + + /* + * Memory region attributes for LPAE (defined in pgtable-3level.h): + * + * n = AttrIndx[2:0] + * + * n MAIR + * UNCACHED 000 00000000 + * BUFFERABLE 001 01000100 + * DEV_WC 001 01000100 + * WRITETHROUGH 010 10101010 + * WRITEBACK 011 11101110 + * DEV_CACHED 011 11101110 + * DEV_SHARED 100 00000100 + * DEV_NONSHARED 100 00000100 + * unused 101 + * unused 110 + * WRITEALLOC 111 11111111 + */ +.equ PRRR, 0xeeaa4400 @ MAIR0 +.equ NMRR, 0xff000004 @ MAIR1 + + /* + * Macro for setting up the TTBRx and TTBCR registers. + * - \ttbr1 updated. + */ + .macro v7_ttb_setup, zero, ttbr0, ttbr1, tmp + ldr \tmp, =swapper_pg_dir @ swapper_pg_dir virtual address + cmp \ttbr1, \tmp @ PHYS_OFFSET > PAGE_OFFSET? (branch below) + mrc p15, 0, \tmp, c2, c0, 2 @ TTB control register + orr \tmp, \tmp, #TTB_EAE + ALT_SMP(orr \tmp, \tmp, #TTB_FLAGS_SMP) + ALT_UP(orr \tmp, \tmp, #TTB_FLAGS_UP) + ALT_SMP(orr \tmp, \tmp, #TTB_FLAGS_SMP << 16) + ALT_UP(orr \tmp, \tmp, #TTB_FLAGS_UP << 16) + /* + * TTBR0/TTBR1 split (PAGE_OFFSET): + * 0x40000000: T0SZ = 2, T1SZ = 0 (not used) + * 0x80000000: T0SZ = 0, T1SZ = 1 + * 0xc0000000: T0SZ = 0, T1SZ = 2 + * + * Only use this feature if PHYS_OFFSET <= PAGE_OFFSET, otherwise + * booting secondary CPUs would end up using TTBR1 for the identity + * mapping set up in TTBR0. + */ + bhi 9001f @ PHYS_OFFSET > PAGE_OFFSET? + orr \tmp, \tmp, #(((PAGE_OFFSET >> 30) - 1) << 16) @ TTBCR.T1SZ +#if defined CONFIG_VMSPLIT_2G + /* PAGE_OFFSET == 0x80000000, T1SZ == 1 */ + add \ttbr1, \ttbr1, #1 << 4 @ skip two L1 entries +#elif defined CONFIG_VMSPLIT_3G + /* PAGE_OFFSET == 0xc0000000, T1SZ == 2 */ + add \ttbr1, \ttbr1, #4096 * (1 + 3) @ only L2 used, skip pgd+3*pmd +#endif + /* CONFIG_VMSPLIT_1G does not need TTBR1 adjustment */ +9001: mcr p15, 0, \tmp, c2, c0, 2 @ TTB control register + mcrr p15, 1, \ttbr1, \zero, c2 @ load TTBR1 + .endm + + __CPUINIT + + /* + * AT + * TFR EV X F IHD LR S + * .EEE ..EE PUI. .TAT 4RVI ZWRS BLDP WCAM + * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced + * 11 0 110 1 0011 1100 .111 1101 < we want + */ + .align 2 + .type v7_crval, #object +v7_crval: + crval clear=0x0120c302, mmuset=0x30c23c7d, ucset=0x00c01c7c + + .previous diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 2c559ac38142..7e9b5bf910c1 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -19,24 +19,11 @@ #include "proc-macros.S" -#define TTB_S (1 << 1) -#define TTB_RGN_NC (0 << 3) -#define TTB_RGN_OC_WBWA (1 << 3) -#define TTB_RGN_OC_WT (2 << 3) -#define TTB_RGN_OC_WB (3 << 3) -#define TTB_NOS (1 << 5) -#define TTB_IRGN_NC ((0 << 0) | (0 << 6)) -#define TTB_IRGN_WBWA ((0 << 0) | (1 << 6)) -#define TTB_IRGN_WT ((1 << 0) | (0 << 6)) -#define TTB_IRGN_WB ((1 << 0) | (1 << 6)) - -/* PTWs cacheable, inner WB not shareable, outer WB not shareable */ -#define TTB_FLAGS_UP TTB_IRGN_WB|TTB_RGN_OC_WB -#define PMD_FLAGS_UP PMD_SECT_WB - -/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */ -#define TTB_FLAGS_SMP TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA -#define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S +#ifdef CONFIG_ARM_LPAE +#include "proc-v7-3level.S" +#else +#include "proc-v7-2level.S" +#endif ENTRY(cpu_v7_proc_init) mov pc, lr @@ -63,6 +50,7 @@ ENDPROC(cpu_v7_proc_fin) * caches disabled. */ .align 5 + .pushsection .idmap.text, "ax" ENTRY(cpu_v7_reset) mrc p15, 0, r1, c1, c0, 0 @ ctrl register bic r1, r1, #0x1 @ ...............m @@ -71,6 +59,7 @@ ENTRY(cpu_v7_reset) isb mov pc, r0 ENDPROC(cpu_v7_reset) + .popsection /* * cpu_v7_do_idle() @@ -97,127 +86,12 @@ ENTRY(cpu_v7_dcache_clean_area) mov pc, lr ENDPROC(cpu_v7_dcache_clean_area) -/* - * cpu_v7_switch_mm(pgd_phys, tsk) - * - * Set the translation table base pointer to be pgd_phys - * - * - pgd_phys - physical address of new TTB - * - * It is assumed that: - * - we are not using split page tables - */ -ENTRY(cpu_v7_switch_mm) -#ifdef CONFIG_MMU - mov r2, #0 - ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id - ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP) - ALT_UP(orr r0, r0, #TTB_FLAGS_UP) -#ifdef CONFIG_ARM_ERRATA_430973 - mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB -#endif -#ifdef CONFIG_ARM_ERRATA_754322 - dsb -#endif - mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID - isb -1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 - isb -#ifdef CONFIG_ARM_ERRATA_754322 - dsb -#endif - mcr p15, 0, r1, c13, c0, 1 @ set context ID - isb -#endif - mov pc, lr -ENDPROC(cpu_v7_switch_mm) - -/* - * cpu_v7_set_pte_ext(ptep, pte) - * - * Set a level 2 translation table entry. - * - * - ptep - pointer to level 2 translation table entry - * (hardware version is stored at +2048 bytes) - * - pte - PTE value to store - * - ext - value for extended PTE bits - */ -ENTRY(cpu_v7_set_pte_ext) -#ifdef CONFIG_MMU - str r1, [r0] @ linux version - - bic r3, r1, #0x000003f0 - bic r3, r3, #PTE_TYPE_MASK - orr r3, r3, r2 - orr r3, r3, #PTE_EXT_AP0 | 2 - - tst r1, #1 << 4 - orrne r3, r3, #PTE_EXT_TEX(1) - - eor r1, r1, #L_PTE_DIRTY - tst r1, #L_PTE_RDONLY | L_PTE_DIRTY - orrne r3, r3, #PTE_EXT_APX - - tst r1, #L_PTE_USER - orrne r3, r3, #PTE_EXT_AP1 -#ifdef CONFIG_CPU_USE_DOMAINS - @ allow kernel read/write access to read-only user pages - tstne r3, #PTE_EXT_APX - bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0 -#endif - - tst r1, #L_PTE_XN - orrne r3, r3, #PTE_EXT_XN - - tst r1, #L_PTE_YOUNG - tstne r1, #L_PTE_PRESENT - moveq r3, #0 - - ARM( str r3, [r0, #2048]! ) - THUMB( add r0, r0, #2048 ) - THUMB( str r3, [r0] ) - mcr p15, 0, r0, c7, c10, 1 @ flush_pte -#endif - mov pc, lr -ENDPROC(cpu_v7_set_pte_ext) - string cpu_v7_name, "ARMv7 Processor" .align - /* - * Memory region attributes with SCTLR.TRE=1 - * - * n = TEX[0],C,B - * TR = PRRR[2n+1:2n] - memory type - * IR = NMRR[2n+1:2n] - inner cacheable property - * OR = NMRR[2n+17:2n+16] - outer cacheable property - * - * n TR IR OR - * UNCACHED 000 00 - * BUFFERABLE 001 10 00 00 - * WRITETHROUGH 010 10 10 10 - * WRITEBACK 011 10 11 11 - * reserved 110 - * WRITEALLOC 111 10 01 01 - * DEV_SHARED 100 01 - * DEV_NONSHARED 100 01 - * DEV_WC 001 10 - * DEV_CACHED 011 10 - * - * Other attributes: - * - * DS0 = PRRR[16] = 0 - device shareable property - * DS1 = PRRR[17] = 1 - device shareable property - * NS0 = PRRR[18] = 0 - normal shareable property - * NS1 = PRRR[19] = 1 - normal shareable property - * NOS = PRRR[24+n] = 1 - not outer shareable - */ -.equ PRRR, 0xff0a81a8 -.equ NMRR, 0x40e040e0 - /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */ .globl cpu_v7_suspend_size -.equ cpu_v7_suspend_size, 4 * 7 +.equ cpu_v7_suspend_size, 4 * 8 #ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_v7_do_suspend) stmfd sp!, {r4 - r10, lr} @@ -226,10 +100,11 @@ ENTRY(cpu_v7_do_suspend) stmia r0!, {r4 - r5} mrc p15, 0, r6, c3, c0, 0 @ Domain ID mrc p15, 0, r7, c2, c0, 1 @ TTB 1 + mrc p15, 0, r11, c2, c0, 2 @ TTB control register mrc p15, 0, r8, c1, c0, 0 @ Control register mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control - stmia r0, {r6 - r10} + stmia r0, {r6 - r11} ldmfd sp!, {r4 - r10, pc} ENDPROC(cpu_v7_do_suspend) @@ -241,13 +116,15 @@ ENTRY(cpu_v7_do_resume) ldmia r0!, {r4 - r5} mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID mcr p15, 0, r5, c13, c0, 3 @ User r/o thread ID - ldmia r0, {r6 - r10} + ldmia r0, {r6 - r11} mcr p15, 0, r6, c3, c0, 0 @ Domain ID +#ifndef CONFIG_ARM_LPAE ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP) ALT_UP(orr r1, r1, #TTB_FLAGS_UP) +#endif mcr p15, 0, r1, c2, c0, 0 @ TTB 0 mcr p15, 0, r7, c2, c0, 1 @ TTB 1 - mcr p15, 0, ip, c2, c0, 2 @ TTB control register + mcr p15, 0, r11, c2, c0, 2 @ TTB control register mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register teq r4, r9 @ Is it already set? mcrne p15, 0, r9, c1, c0, 1 @ No, so write it @@ -284,6 +161,7 @@ __v7_ca5mp_setup: __v7_ca9mp_setup: mov r10, #(1 << 0) @ TLB ops broadcasting b 1f +__v7_ca7mp_setup: __v7_ca15mp_setup: mov r10, #0 1: @@ -363,11 +241,13 @@ __v7_setup: orreq r10, r10, #1 << 6 @ set bit #6 mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register #endif -#ifdef CONFIG_ARM_ERRATA_751472 - cmp r6, #0x30 @ present prior to r3p0 +#if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP) + ALT_SMP(cmp r6, #0x30) @ present prior to r3p0 + ALT_UP_B(1f) mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register orrlt r10, r10, #1 << 11 @ set bit #11 mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register +1: #endif 3: mov r10, #0 @@ -377,12 +257,7 @@ __v7_setup: dsb #ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs - mcr p15, 0, r10, c2, c0, 2 @ TTB control register - ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) - ALT_UP(orr r4, r4, #TTB_FLAGS_UP) - ALT_SMP(orr r8, r8, #TTB_FLAGS_SMP) - ALT_UP(orr r8, r8, #TTB_FLAGS_UP) - mcr p15, 0, r8, c2, c0, 1 @ load TTB1 + v7_ttb_setup r10, r4, r8, r5 @ TTBCR, TTBRx setup ldr r5, =PRRR @ PRRR ldr r6, =NMRR @ NMRR mcr p15, 0, r5, c10, c2, 0 @ write PRRR @@ -404,16 +279,7 @@ __v7_setup: mov pc, lr @ return to head.S:__ret ENDPROC(__v7_setup) - /* AT - * TFR EV X F I D LR S - * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM - * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced - * 1 0 110 0011 1100 .111 1101 < we want - */ - .type v7_crval, #object -v7_crval: - crval clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c - + .align 2 __v7_setup_stack: .space 4 * 11 @ 11 registers @@ -435,11 +301,11 @@ __v7_setup_stack: */ .macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0 ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \ - PMD_FLAGS_SMP | \mm_mmuflags) + PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags) ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \ - PMD_FLAGS_UP | \mm_mmuflags) - .long PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ | \io_mmuflags + PMD_SECT_AF | PMD_FLAGS_UP | \mm_mmuflags) + .long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ | PMD_SECT_AF | \io_mmuflags W(b) \initfunc .long cpu_arch_name .long cpu_elf_name @@ -452,6 +318,7 @@ __v7_setup_stack: .long v7_cache_fns .endm +#ifndef CONFIG_ARM_LPAE /* * ARM Ltd. Cortex A5 processor. */ @@ -463,6 +330,16 @@ __v7_ca5mp_proc_info: .size __v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info /* + * ARM Ltd. Cortex A7 processor. + */ + .type __v7_ca7mp_proc_info, #object +__v7_ca7mp_proc_info: + .long 0x410fc070 + .long 0xff0ffff0 + __v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV + .size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info + + /* * ARM Ltd. Cortex A9 processor. */ .type __v7_ca9mp_proc_info, #object @@ -471,6 +348,7 @@ __v7_ca9mp_proc_info: .long 0xff0ffff0 __v7_proc __v7_ca9mp_setup .size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info +#endif /* CONFIG_ARM_LPAE */ /* * ARM Ltd. Cortex A15 processor. diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index abf0507a08ae..b0d57869da2d 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -105,6 +105,7 @@ ENTRY(cpu_xsc3_proc_fin) * loc: location to jump to for soft reset */ .align 5 + .pushsection .idmap.text, "ax" ENTRY(cpu_xsc3_reset) mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE msr cpsr_c, r1 @ reset CPSR @@ -119,6 +120,8 @@ ENTRY(cpu_xsc3_reset) @ already containing those two last instructions to survive. mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs mov pc, r0 +ENDPROC(cpu_xsc3_reset) + .popsection /* * cpu_xsc3_do_idle() diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 3277904bebaf..4ffebaa595ee 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -142,6 +142,7 @@ ENTRY(cpu_xscale_proc_fin) * Beware PXA270 erratum E7. */ .align 5 + .pushsection .idmap.text, "ax" ENTRY(cpu_xscale_reset) mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE msr cpsr_c, r1 @ reset CPSR @@ -160,6 +161,8 @@ ENTRY(cpu_xscale_reset) @ already containing those two last instructions to survive. mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs mov pc, r0 +ENDPROC(cpu_xscale_reset) + .popsection /* * cpu_xscale_do_idle() diff --git a/arch/arm/nwfpe/entry.S b/arch/arm/nwfpe/entry.S index cafa18354339..d18dde95b8aa 100644 --- a/arch/arm/nwfpe/entry.S +++ b/arch/arm/nwfpe/entry.S @@ -20,6 +20,8 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <asm/opcodes.h> + /* This is the kernel's entry point into the floating point emulator. It is called from the kernel with code similar to this: @@ -81,11 +83,11 @@ nwfpe_enter: mov r6, r0 @ save the opcode emulate: ldr r1, [sp, #S_PSR] @ fetch the PSR - bl checkCondition @ check the condition - cmp r0, #0 @ r0 = 0 ==> condition failed + bl arm_check_condition @ check the condition + cmp r0, #ARM_OPCODE_CONDTEST_PASS @ condition passed? @ if condition code failed to match, next insn - beq next @ get the next instruction; + bne next @ get the next instruction; mov r0, r6 @ prepare for EmulateAll() bl EmulateAll @ emulate the instruction diff --git a/arch/arm/nwfpe/fpopcode.c b/arch/arm/nwfpe/fpopcode.c index 922b81107585..ff9834673085 100644 --- a/arch/arm/nwfpe/fpopcode.c +++ b/arch/arm/nwfpe/fpopcode.c @@ -61,29 +61,3 @@ const float32 float32Constant[] = { 0x41200000 /* single 10.0 */ }; -/* condition code lookup table - index into the table is test code: EQ, NE, ... LT, GT, AL, NV - bit position in short is condition code: NZCV */ -static const unsigned short aCC[16] = { - 0xF0F0, // EQ == Z set - 0x0F0F, // NE - 0xCCCC, // CS == C set - 0x3333, // CC - 0xFF00, // MI == N set - 0x00FF, // PL - 0xAAAA, // VS == V set - 0x5555, // VC - 0x0C0C, // HI == C set && Z clear - 0xF3F3, // LS == C clear || Z set - 0xAA55, // GE == (N==V) - 0x55AA, // LT == (N!=V) - 0x0A05, // GT == (!Z && (N==V)) - 0xF5FA, // LE == (Z || (N!=V)) - 0xFFFF, // AL always - 0 // NV -}; - -unsigned int checkCondition(const unsigned int opcode, const unsigned int ccodes) -{ - return (aCC[opcode >> 28] >> (ccodes >> 28)) & 1; -} diff --git a/arch/arm/nwfpe/fpopcode.h b/arch/arm/nwfpe/fpopcode.h index 786e4c96156d..78f02dbfaa8f 100644 --- a/arch/arm/nwfpe/fpopcode.h +++ b/arch/arm/nwfpe/fpopcode.h @@ -475,9 +475,6 @@ static inline unsigned int getDestinationSize(const unsigned int opcode) return (nRc); } -extern unsigned int checkCondition(const unsigned int opcode, - const unsigned int ccodes); - extern const float64 float64Constant[]; extern const float32 float32Constant[]; diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index c074e66ad224..4e0a371630b3 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -116,7 +116,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) return oprofile_perf_init(ops); } -void __exit oprofile_arch_exit(void) +void oprofile_arch_exit(void) { oprofile_perf_exit(); } diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile index 69b09c1cec8b..a99dc15a70f7 100644 --- a/arch/arm/plat-iop/Makefile +++ b/arch/arm/plat-iop/Makefile @@ -10,10 +10,10 @@ obj-$(CONFIG_ARCH_IOP32X) += i2c.o obj-$(CONFIG_ARCH_IOP32X) += pci.o obj-$(CONFIG_ARCH_IOP32X) += setup.o obj-$(CONFIG_ARCH_IOP32X) += time.o -obj-$(CONFIG_ARCH_IOP32X) += io.o obj-$(CONFIG_ARCH_IOP32X) += cp6.o obj-$(CONFIG_ARCH_IOP32X) += adma.o obj-$(CONFIG_ARCH_IOP32X) += pmu.o +obj-$(CONFIG_ARCH_IOP32X) += restart.o # IOP33X obj-$(CONFIG_ARCH_IOP33X) += gpio.o @@ -21,10 +21,10 @@ obj-$(CONFIG_ARCH_IOP33X) += i2c.o obj-$(CONFIG_ARCH_IOP33X) += pci.o obj-$(CONFIG_ARCH_IOP33X) += setup.o obj-$(CONFIG_ARCH_IOP33X) += time.o -obj-$(CONFIG_ARCH_IOP33X) += io.o obj-$(CONFIG_ARCH_IOP33X) += cp6.o obj-$(CONFIG_ARCH_IOP33X) += adma.o obj-$(CONFIG_ARCH_IOP33X) += pmu.o +obj-$(CONFIG_ARCH_IOP33X) += restart.o # IOP13XX obj-$(CONFIG_ARCH_IOP13XX) += cp6.o diff --git a/arch/arm/plat-iop/io.c b/arch/arm/plat-iop/io.c deleted file mode 100644 index e15bc17db90b..000000000000 --- a/arch/arm/plat-iop/io.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * iop3xx custom ioremap implementation - * Copyright (c) 2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * - */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/io.h> -#include <mach/hardware.h> - -void * __iomem __iop3xx_ioremap(unsigned long cookie, size_t size, - unsigned int mtype) -{ - void __iomem * retval; - - switch (cookie) { - case IOP3XX_PCI_LOWER_IO_PA ... IOP3XX_PCI_UPPER_IO_PA: - retval = (void *) IOP3XX_PCI_IO_PHYS_TO_VIRT(cookie); - break; - case IOP3XX_PERIPHERAL_PHYS_BASE ... IOP3XX_PERIPHERAL_UPPER_PA: - retval = (void *) IOP3XX_PMMR_PHYS_TO_VIRT(cookie); - break; - default: - retval = __arm_ioremap_caller(cookie, size, mtype, - __builtin_return_address(0)); - } - - return retval; -} -EXPORT_SYMBOL(__iop3xx_ioremap); - -void __iop3xx_iounmap(void __iomem *addr) -{ - extern void __iounmap(volatile void __iomem *addr); - - switch ((u32) addr) { - case IOP3XX_PCI_LOWER_IO_VA ... IOP3XX_PCI_UPPER_IO_VA: - case IOP3XX_PERIPHERAL_VIRT_BASE ... IOP3XX_PERIPHERAL_UPPER_VA: - goto skip; - } - __iounmap(addr); - -skip: - return; -} -EXPORT_SYMBOL(__iop3xx_iounmap); diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index 845549cbbb27..f4d40a27111e 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -215,16 +215,16 @@ int iop3xx_pci_setup(int nr, struct pci_sys_data *sys) sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0; sys->io_offset = IOP3XX_PCI_LOWER_IO_PA - *IOP3XX_OIOWTVR; - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; + pci_add_resource(&sys->resources, &res[0]); + pci_add_resource(&sys->resources, &res[1]); return 1; } struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *sys) { - return pci_scan_bus(sys->busnr, &iop3xx_ops, sys); + return pci_scan_root_bus(NULL, sys->busnr, &iop3xx_ops, sys, + &sys->resources); } void __init iop3xx_atu_setup(void) diff --git a/arch/arm/plat-iop/restart.c b/arch/arm/plat-iop/restart.c new file mode 100644 index 000000000000..6a85a0c502e6 --- /dev/null +++ b/arch/arm/plat-iop/restart.c @@ -0,0 +1,19 @@ +/* + * restart.c + * + * Copyright (C) 2001 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <asm/hardware/iop3xx.h> +#include <mach/hardware.h> + +void iop3xx_restart(char mode, const char *cmd) +{ + *IOP3XX_PCSR = 0x30; + + /* Jump into ROM at address 0 */ + soft_restart(0); +} diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c index 568dd0223d17..cbfbbe461788 100644 --- a/arch/arm/plat-iop/time.c +++ b/arch/arm/plat-iop/time.c @@ -18,7 +18,6 @@ #include <linux/time.h> #include <linux/init.h> #include <linux/timex.h> -#include <linux/sched.h> #include <linux/io.h> #include <linux/clocksource.h> #include <linux/clockchips.h> @@ -52,21 +51,12 @@ static struct clocksource iop_clocksource = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static DEFINE_CLOCK_DATA(cd); - /* * IOP sched_clock() implementation via its clocksource. */ -unsigned long long notrace sched_clock(void) +static u32 notrace iop_read_sched_clock(void) { - u32 cyc = 0xffffffffu - read_tcr1(); - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -static void notrace iop_update_sched_clock(void) -{ - u32 cyc = 0xffffffffu - read_tcr1(); - update_sched_clock(&cd, cyc, (u32)~0); + return 0xffffffffu - read_tcr1(); } /* @@ -152,7 +142,7 @@ void __init iop_init_time(unsigned long tick_rate) { u32 timer_ctl; - init_sched_clock(&cd, iop_update_sched_clock, 32, tick_rate); + setup_sched_clock(iop_read_sched_clock, 32, tick_rate); ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ); iop_tick_rate = tick_rate; diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index b3a1f2b3ada3..b30708e28c1d 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -20,6 +20,7 @@ config ARCH_IMX_V6_V7 bool "i.MX3, i.MX6" select AUTO_ZRELADDR if !ZBOOT_ROM select ARM_PATCH_PHYS_VIRT + select MIGHT_HAVE_CACHE_L2X0 help This enables support for systems based on the Freescale i.MX3 and i.MX6 family. diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index b9f0f5f499a4..076db84f3e31 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -5,7 +5,6 @@ # Common support obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o -obj-$(CONFIG_ARM_GIC) += gic.o obj-$(CONFIG_MXC_TZIC) += tzic.o obj-$(CONFIG_MXC_AVIC) += avic.o diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c index 74aac96cda20..73db34bf588a 100644 --- a/arch/arm/plat-mxc/cpufreq.c +++ b/arch/arm/plat-mxc/cpufreq.c @@ -17,6 +17,7 @@ * the CPU clock speed on the fly. */ +#include <linux/module.h> #include <linux/cpufreq.h> #include <linux/clk.h> #include <linux/err.h> @@ -97,7 +98,7 @@ static int mxc_set_target(struct cpufreq_policy *policy, return ret; } -static int __init mxc_cpufreq_init(struct cpufreq_policy *policy) +static int mxc_cpufreq_init(struct cpufreq_policy *policy) { int ret; int i; diff --git a/arch/arm/plat-mxc/gic.c b/arch/arm/plat-mxc/gic.c deleted file mode 100644 index 12f8f8109010..000000000000 --- a/arch/arm/plat-mxc/gic.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/io.h> -#include <asm/exception.h> -#include <asm/localtimer.h> -#include <asm/hardware/gic.h> -#ifdef CONFIG_SMP -#include <asm/smp.h> -#endif - -asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs) -{ - u32 irqstat, irqnr; - - do { - irqstat = readl_relaxed(gic_cpu_base_addr + GIC_CPU_INTACK); - irqnr = irqstat & 0x3ff; - if (irqnr == 1023) - break; - - if (irqnr > 15 && irqnr < 1021) - handle_IRQ(irqnr, regs); -#ifdef CONFIG_SMP - else { - writel_relaxed(irqstat, gic_cpu_base_addr + - GIC_CPU_EOI); - handle_IPI(irqnr, regs); - } -#endif - } while (1); -} diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index c75f254abd85..1bf0df81bdc6 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -71,8 +71,8 @@ extern int mx6q_clocks_init(void); extern struct platform_device *mxc_register_gpio(char *name, int id, resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); extern void mxc_set_cpu_type(unsigned int type); +extern void mxc_restart(char, const char *); extern void mxc_arch_reset_init(void __iomem *); -extern void mx51_efikamx_reset(void); extern int mx53_revision(void); extern int mx53_display_revision(void); @@ -89,7 +89,6 @@ extern void imx_print_silicon_rev(const char *cpu, int srev); void avic_handle_irq(struct pt_regs *); void tzic_handle_irq(struct pt_regs *); -void gic_handle_irq(struct pt_regs *); #define imx1_handle_irq avic_handle_irq #define imx21_handle_irq avic_handle_irq @@ -122,6 +121,7 @@ static inline void imx_smp_prepare(void) {} extern void imx_enable_cpu(int cpu, bool enable); extern void imx_set_cpu_jump(int cpu, void *jump_addr); extern void imx_src_init(void); +extern void imx_src_prepare_restart(void); extern void imx_gpc_init(void); extern void imx_gpc_pre_suspend(void); extern void imx_gpc_post_resume(void); @@ -131,6 +131,12 @@ extern void imx53_evk_common_init(void); extern void imx53_qsb_common_init(void); extern void imx53_smd_common_init(void); extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); -extern void imx6q_pm_init(void); extern void imx6q_clock_map_io(void); + +#ifdef CONFIG_PM +extern void imx6q_pm_init(void); +#else +static inline void imx6q_pm_init(void) {} +#endif + #endif diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index ca5cf26a04b1..def5d30cb67e 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -9,19 +9,8 @@ * published by the Free Software Foundation. */ -/* Unused, we use CONFIG_MULTI_IRQ_HANDLER */ - .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - .endm - - .macro test_for_ipi, irqnr, irqstat, base, tmp - .endm diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h index bf64e1e594ed..f0726d48df22 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h @@ -265,16 +265,20 @@ #define MX25_PAD_CSI_D2__CSI_D2 IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CSI_D2__UART5_RXD_MUX IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL) #define MX25_PAD_CSI_D2__GPIO_1_27 IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_D2__CSPI3_MOSI IOMUX_PAD(0x318, 0x120, 0x17, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CSI_D3__CSI_D3 IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CSI_D3__GPIO_1_28 IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_D3__CSPI3_MISO IOMUX_PAD(0x31c, 0x124, 0x17, 0x4b4, 1, NO_PAD_CTRL) #define MX25_PAD_CSI_D4__CSI_D4 IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CSI_D4__UART5_RTS IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL) #define MX25_PAD_CSI_D4__GPIO_1_29 IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_D4__CSPI3_SCLK IOMUX_PAD(0x320, 0x128, 0x17, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CSI_D5__CSI_D5 IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CSI_D5__GPIO_1_30 IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_D5__CSPI3_RDY IOMUX_PAD(0x324, 0x12c, 0x17, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CSI_D6__CSI_D6 IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CSI_D6__GPIO_1_31 IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h index 97b19e7800bc..2b7c08d13e89 100644 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ b/arch/arm/plat-mxc/include/mach/mx1.h @@ -12,8 +12,6 @@ #ifndef __MACH_MX1_H__ #define __MACH_MX1_H__ -#include <mach/vmalloc.h> - /* * Memory map */ diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index a4d36d601d55..d78298366a91 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -168,7 +168,7 @@ struct cpu_op { u32 cpu_rate; }; -int tzic_enable_wake(int is_idle); +int tzic_enable_wake(void); extern struct cpu_op *(*get_cpu_op)(int *op); #endif diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h index b9895d250167..13ad0df2e860 100644 --- a/arch/arm/plat-mxc/include/mach/system.h +++ b/arch/arm/plat-mxc/include/mach/system.h @@ -22,6 +22,4 @@ static inline void arch_idle(void) cpu_do_idle(); } -void arch_reset(char mode, const char *cmd); - #endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 88fd40452567..477971b00930 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -98,6 +98,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_PCM043: case MACH_TYPE_LILLY1131: case MACH_TYPE_VPR200: + case MACH_TYPE_EUKREA_CPUIMX35SD: uart_base = MX3X_UART1_BASE_ADDR; break; case MACH_TYPE_MAGX_ZN5: diff --git a/arch/arm/plat-mxc/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h deleted file mode 100644 index ef6379c474be..000000000000 --- a/arch/arm/plat-mxc/include/mach/vmalloc.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2000 Russell King. - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MXC_VMALLOC_H__ -#define __ASM_ARCH_MXC_VMALLOC_H__ - -/* vmalloc ending address */ -#define VMALLOC_END 0xf4000000UL - -#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */ diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 42d74ea59084..e032717f7d02 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -32,6 +32,9 @@ #define MX3_PWMSAR 0x0C /* PWM Sample Register */ #define MX3_PWMPR 0x10 /* PWM Period Register */ #define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4) +#define MX3_PWMCR_DOZEEN (1 << 24) +#define MX3_PWMCR_WAITEN (1 << 23) +#define MX3_PWMCR_DBGEN (1 << 22) #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16) #define MX3_PWMCR_CLKSRC_IPG (1 << 16) #define MX3_PWMCR_EN (1 << 0) @@ -74,10 +77,21 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) do_div(c, period_ns); duty_cycles = c; + /* + * according to imx pwm RM, the real period value should be + * PERIOD value in PWMPR plus 2. + */ + if (period_cycles > 2) + period_cycles -= 2; + else + period_cycles = 0; + writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR); writel(period_cycles, pwm->mmio_base + MX3_PWMPR); - cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN; + cr = MX3_PWMCR_PRESCALER(prescale) | + MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | + MX3_PWMCR_DBGEN | MX3_PWMCR_EN; if (cpu_is_mx25()) cr |= MX3_PWMCR_CLKSRC_IPG; diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index d65fb31a55ca..3599bf2cfd4f 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -37,17 +37,10 @@ static void __iomem *wdog_base; /* * Reset the system. It is called by machine_restart(). */ -void arch_reset(char mode, const char *cmd) +void mxc_restart(char mode, const char *cmd) { unsigned int wcr_enable; -#ifdef CONFIG_MACH_MX51_EFIKAMX - if (machine_is_mx51_efikamx()) { - mx51_efikamx_reset(); - return; - } -#endif - if (cpu_is_mx1()) { wcr_enable = (1 << 0); } else { @@ -71,7 +64,7 @@ void arch_reset(char mode, const char *cmd) mdelay(50); /* we'll take a jump through zero as a poor second */ - cpu_reset(0); + soft_restart(0); } void mxc_arch_reset_init(void __iomem *base) diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 4b0fe285e83c..1c96cdb4c35e 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -108,18 +108,9 @@ static void gpt_irq_acknowledge(void) static void __iomem *sched_clock_reg; -static DEFINE_CLOCK_DATA(cd); -unsigned long long notrace sched_clock(void) +static u32 notrace mxc_read_sched_clock(void) { - cycle_t cyc = sched_clock_reg ? __raw_readl(sched_clock_reg) : 0; - - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -static void notrace mxc_update_sched_clock(void) -{ - cycle_t cyc = sched_clock_reg ? __raw_readl(sched_clock_reg) : 0; - update_sched_clock(&cd, cyc, (u32)~0); + return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0; } static int __init mxc_clocksource_init(struct clk *timer_clk) @@ -129,7 +120,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk) sched_clock_reg = reg; - init_sched_clock(&cd, mxc_update_sched_clock, 32, c); + setup_sched_clock(mxc_read_sched_clock, 32, c); return clocksource_mmio_init(reg, "mxc_timer1", c, 200, 32, clocksource_mmio_readl_up); } diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index a3c164c7ba82..98308ec1f321 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -73,7 +73,28 @@ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type) #define tzic_set_irq_fiq NULL #endif -static unsigned int *wakeup_intr[4]; +#ifdef CONFIG_PM +static void tzic_irq_suspend(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + int idx = gc->irq_base >> 5; + + __raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx)); +} + +static void tzic_irq_resume(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + int idx = gc->irq_base >> 5; + + __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)), + tzic_base + TZIC_WAKEUP0(idx)); +} + +#else +#define tzic_irq_suspend NULL +#define tzic_irq_resume NULL +#endif static struct mxc_extra_irq tzic_extra_irq = { #ifdef CONFIG_FIQ @@ -91,12 +112,13 @@ static __init void tzic_init_gc(unsigned int irq_start) handle_level_irq); gc->private = &tzic_extra_irq; gc->wake_enabled = IRQ_MSK(32); - wakeup_intr[idx] = &gc->wake_active; ct = gc->chip_types; ct->chip.irq_mask = irq_gc_mask_disable_reg; ct->chip.irq_unmask = irq_gc_unmask_enable_reg; ct->chip.irq_set_wake = irq_gc_set_wake; + ct->chip.irq_suspend = tzic_irq_suspend; + ct->chip.irq_resume = tzic_irq_resume; ct->regs.disable = TZIC_ENCLEAR0(idx); ct->regs.enable = TZIC_ENSET0(idx); @@ -167,23 +189,19 @@ void __init tzic_init_irq(void __iomem *irqbase) /** * tzic_enable_wake() - enable wakeup interrupt * - * @param is_idle 1 if called in idle loop (ENSET0 register); - * 0 to be used when called from low power entry * @return 0 if successful; non-zero otherwise */ -int tzic_enable_wake(int is_idle) +int tzic_enable_wake(void) { - unsigned int i, v; + unsigned int i; __raw_writel(1, tzic_base + TZIC_DSMINT); if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0)) return -EAGAIN; - for (i = 0; i < 4; i++) { - v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) : - *wakeup_intr[i]; - __raw_writel(v, tzic_base + TZIC_WAKEUP0(i)); - } + for (i = 0; i < 4; i++) + __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(i)), + tzic_base + TZIC_WAKEUP0(i)); return 0; } diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index 30b6433d910d..ad1b45b605a4 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -17,7 +17,6 @@ #include <linux/clk.h> #include <linux/jiffies.h> #include <linux/err.h> -#include <linux/sched.h> #include <asm/mach/time.h> #include <asm/sched_clock.h> @@ -79,23 +78,12 @@ void __iomem *mtu_base; /* Assigned by machine code */ * local implementation which uses the clocksource to get some * better resolution when scheduling the kernel. */ -static DEFINE_CLOCK_DATA(cd); - -unsigned long long notrace sched_clock(void) +static u32 notrace nomadik_read_sched_clock(void) { - u32 cyc; - if (unlikely(!mtu_base)) return 0; - cyc = -readl(mtu_base + MTU_VAL(0)); - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -static void notrace nomadik_update_sched_clock(void) -{ - u32 cyc = -readl(mtu_base + MTU_VAL(0)); - update_sched_clock(&cd, cyc, (u32)~0); + return -readl(mtu_base + MTU_VAL(0)); } #endif @@ -231,9 +219,11 @@ void __init nmdk_timer_init(void) rate, 200, 32, clocksource_mmio_readl_down)) pr_err("timer: failed to initialize clock source %s\n", "mtu_0"); + #ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK - init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate); + setup_sched_clock(nomadik_read_sched_clock, 32, rate); #endif + /* Timer 1 is used for events */ clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE); diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index a53eca33627f..9a584614e7e6 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := common.o sram.o clock.o devices.o dma.o mux.o \ - usb.o fb.o io.o counter_32k.o + usb.o fb.o counter_32k.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index d9f10a31e604..06383b51e655 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/dma-mapping.h> #include <linux/omapfb.h> #include <plat/common.h> @@ -21,6 +22,8 @@ #include <plat/vram.h> #include <plat/dsp.h> +#include <plat/omap-secure.h> + #define NO_LENGTH_CHECK 0xffffffff @@ -65,4 +68,12 @@ void __init omap_reserve(void) omapfb_reserve_sdram_memblock(); omap_vram_reserve_sdram_memblock(); omap_dsp_reserve_sdram_memblock(); + omap_secure_ram_reserve_memblock(); +} + +void __init omap_init_consistent_dma_size(void) +{ +#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20); +#endif } diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index a6cbb712da51..5f0f2292b7fb 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -17,7 +17,6 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> -#include <linux/sched.h> #include <linux/clocksource.h> #include <asm/sched_clock.h> @@ -37,41 +36,9 @@ static void __iomem *timer_32k_base; #define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410 -/* - * Returns current time from boot in nsecs. It's OK for this to wrap - * around for now, as it's just a relative time stamp. - */ -static DEFINE_CLOCK_DATA(cd); - -/* - * Constants generated by clocks_calc_mult_shift(m, s, 32768, NSEC_PER_SEC, 60). - * This gives a resolution of about 30us and a wrap period of about 36hrs. - */ -#define SC_MULT 4000000000u -#define SC_SHIFT 17 - -static inline unsigned long long notrace _omap_32k_sched_clock(void) -{ - u32 cyc = timer_32k_base ? __raw_readl(timer_32k_base) : 0; - return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT); -} - -#if defined(CONFIG_OMAP_32K_TIMER) && !defined(CONFIG_OMAP_MPU_TIMER) -unsigned long long notrace sched_clock(void) -{ - return _omap_32k_sched_clock(); -} -#else -unsigned long long notrace omap_32k_sched_clock(void) -{ - return _omap_32k_sched_clock(); -} -#endif - -static void notrace omap_update_sched_clock(void) +static u32 notrace omap_32k_read_sched_clock(void) { - u32 cyc = timer_32k_base ? __raw_readl(timer_32k_base) : 0; - update_sched_clock(&cd, cyc, (u32)~0); + return timer_32k_base ? __raw_readl(timer_32k_base) : 0; } /** @@ -147,8 +114,7 @@ int __init omap_init_clocksource_32k(void) clocksource_mmio_readl_up)) printk(err, "32k_counter"); - init_fixed_sched_clock(&cd, omap_update_sched_clock, 32, - 32768, SC_MULT, SC_SHIFT); + setup_sched_clock(omap_32k_read_sched_clock, 32, 32768); } return 0; } diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index c22217c2ee5f..002fb4d96bbc 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1034,6 +1034,18 @@ dma_addr_t omap_get_dma_src_pos(int lch) if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0) offset = p->dma_read(CSAC, lch); + if (!cpu_is_omap15xx()) { + /* + * CDAC == 0 indicates that the DMA transfer on the channel has + * not been started (no data has been transferred so far). + * Return the programmed source start address in this case. + */ + if (likely(p->dma_read(CDAC, lch))) + offset = p->dma_read(CSAC, lch); + else + offset = p->dma_read(CSSA, lch); + } + if (cpu_class_is_omap1()) offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000); @@ -1062,8 +1074,16 @@ dma_addr_t omap_get_dma_dst_pos(int lch) * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is * read before the DMA controller finished disabling the channel. */ - if (!cpu_is_omap15xx() && offset == 0) + if (!cpu_is_omap15xx() && offset == 0) { offset = p->dma_read(CDAC, lch); + /* + * CDAC == 0 indicates that the DMA transfer on the channel has + * not been started (no data has been transferred so far). + * Return the programmed destination start address in this case. + */ + if (unlikely(!offset)) + offset = p->dma_read(CDSA, lch); + } if (cpu_class_is_omap1()) offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000); diff --git a/arch/arm/plat-omap/include/plat/am33xx.h b/arch/arm/plat-omap/include/plat/am33xx.h new file mode 100644 index 000000000000..06c19bb7bca6 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/am33xx.h @@ -0,0 +1,25 @@ +/* + * This file contains the address info for various AM33XX modules. + * + * Copyright (C) 2011 Texas Instruments, Inc. - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_AM33XX_H +#define __ASM_ARCH_AM33XX_H + +#define L4_SLOW_AM33XX_BASE 0x48000000 + +#define AM33XX_SCM_BASE 0x44E10000 +#define AM33XX_CTRL_BASE AM33XX_SCM_BASE +#define AM33XX_PRCM_BASE 0x44E00000 + +#endif /* __ASM_ARCH_AM33XX_H */ diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h index 387a9638991b..b299b8d201c8 100644 --- a/arch/arm/plat-omap/include/plat/clkdev_omap.h +++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h @@ -40,6 +40,7 @@ struct omap_clk { #define CK_443X (1 << 11) #define CK_TI816X (1 << 12) #define CK_446X (1 << 13) +#define CK_1710 (1 << 15) /* 1710 extra for rate selection */ #define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS) diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index eb73ab40e955..240a7b9fd946 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -59,6 +59,8 @@ struct clkops { #define RATE_IN_4430 (1 << 5) #define RATE_IN_TI816X (1 << 6) #define RATE_IN_4460 (1 << 7) +#define RATE_IN_AM33XX (1 << 8) +#define RATE_IN_TI814X (1 << 9) #define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) #define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS) @@ -84,7 +86,7 @@ struct clkops { struct clksel_rate { u32 val; u8 div; - u8 flags; + u16 flags; }; /** diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 3ff3e36580f2..b4d7ec3fbfbe 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -27,97 +27,14 @@ #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H #define __ARCH_ARM_MACH_OMAP_COMMON_H -#include <linux/delay.h> - #include <plat/i2c.h> #include <plat/omap_hwmod.h> -struct sys_timer; - -extern void omap_map_common_io(void); -extern struct sys_timer omap1_timer; -extern struct sys_timer omap2_timer; -extern struct sys_timer omap3_timer; -extern struct sys_timer omap3_secure_timer; -extern struct sys_timer omap4_timer; -extern bool omap_32k_timer_init(void); extern int __init omap_init_clocksource_32k(void); -extern unsigned long long notrace omap_32k_sched_clock(void); extern void omap_reserve(void); - -void omap2420_init_early(void); -void omap2430_init_early(void); -void omap3430_init_early(void); -void omap35xx_init_early(void); -void omap3630_init_early(void); -void omap3_init_early(void); /* Do not use this one */ -void am35xx_init_early(void); -void ti816x_init_early(void); -void omap4430_init_early(void); - extern int omap_dss_reset(struct omap_hwmod *); void omap_sram_init(void); -/* - * IO bases for various OMAP processors - * Except the tap base, rest all the io bases - * listed are physical addresses. - */ -struct omap_globals { - u32 class; /* OMAP class to detect */ - void __iomem *tap; /* Control module ID code */ - void __iomem *sdrc; /* SDRAM Controller */ - void __iomem *sms; /* SDRAM Memory Scheduler */ - void __iomem *ctrl; /* System Control Module */ - void __iomem *ctrl_pad; /* PAD Control Module */ - void __iomem *prm; /* Power and Reset Management */ - void __iomem *cm; /* Clock Management */ - void __iomem *cm2; -}; - -void omap2_set_globals_242x(void); -void omap2_set_globals_243x(void); -void omap2_set_globals_3xxx(void); -void omap2_set_globals_443x(void); -void omap2_set_globals_ti816x(void); - -/* These get called from omap2_set_globals_xxxx(), do not call these */ -void omap2_set_globals_tap(struct omap_globals *); -void omap2_set_globals_sdrc(struct omap_globals *); -void omap2_set_globals_control(struct omap_globals *); -void omap2_set_globals_prcm(struct omap_globals *); - -void omap242x_map_io(void); -void omap243x_map_io(void); -void omap3_map_io(void); -void omap4_map_io(void); - - -/** - * omap_test_timeout - busy-loop, testing a condition - * @cond: condition to test until it evaluates to true - * @timeout: maximum number of microseconds in the timeout - * @index: loop index (integer) - * - * Loop waiting for @cond to become true or until at least @timeout - * microseconds have passed. To use, define some integer @index in the - * calling code. After running, if @index == @timeout, then the loop has - * timed out. - */ -#define omap_test_timeout(cond, timeout, index) \ -({ \ - for (index = 0; index < timeout; index++) { \ - if (cond) \ - break; \ - udelay(1); \ - } \ -}) - -extern struct device *omap2_get_mpuss_device(void); -extern struct device *omap2_get_iva_device(void); -extern struct device *omap2_get_l3_device(void); -extern struct device *omap4_get_dsp_device(void); - #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 408a12f79205..6b51086fce18 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -69,6 +69,7 @@ unsigned int omap_rev(void); * cpu_is_omap343x(): True for OMAP3430 * cpu_is_omap443x(): True for OMAP4430 * cpu_is_omap446x(): True for OMAP4460 + * cpu_is_omap447x(): True for OMAP4470 */ #define GET_OMAP_CLASS (omap_rev() & 0xff) @@ -78,6 +79,22 @@ static inline int is_omap ##class (void) \ return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ } +#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff) + +#define IS_AM_CLASS(class, id) \ +static inline int is_am ##class (void) \ +{ \ + return (GET_AM_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff) + +#define IS_TI_CLASS(class, id) \ +static inline int is_ti ##class (void) \ +{ \ + return (GET_TI_CLASS == (id)) ? 1 : 0; \ +} + #define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) #define IS_OMAP_SUBCLASS(subclass, id) \ @@ -92,12 +109,21 @@ static inline int is_ti ##subclass (void) \ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ } +#define IS_AM_SUBCLASS(subclass, id) \ +static inline int is_am ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + IS_OMAP_CLASS(7xx, 0x07) IS_OMAP_CLASS(15xx, 0x15) IS_OMAP_CLASS(16xx, 0x16) IS_OMAP_CLASS(24xx, 0x24) IS_OMAP_CLASS(34xx, 0x34) IS_OMAP_CLASS(44xx, 0x44) +IS_AM_CLASS(33xx, 0x33) + +IS_TI_CLASS(81xx, 0x81) IS_OMAP_SUBCLASS(242x, 0x242) IS_OMAP_SUBCLASS(243x, 0x243) @@ -105,8 +131,11 @@ IS_OMAP_SUBCLASS(343x, 0x343) IS_OMAP_SUBCLASS(363x, 0x363) IS_OMAP_SUBCLASS(443x, 0x443) IS_OMAP_SUBCLASS(446x, 0x446) +IS_OMAP_SUBCLASS(447x, 0x447) IS_TI_SUBCLASS(816x, 0x816) +IS_TI_SUBCLASS(814x, 0x814) +IS_AM_SUBCLASS(335x, 0x335) #define cpu_is_omap7xx() 0 #define cpu_is_omap15xx() 0 @@ -116,10 +145,15 @@ IS_TI_SUBCLASS(816x, 0x816) #define cpu_is_omap243x() 0 #define cpu_is_omap34xx() 0 #define cpu_is_omap343x() 0 +#define cpu_is_ti81xx() 0 #define cpu_is_ti816x() 0 +#define cpu_is_ti814x() 0 +#define cpu_is_am33xx() 0 +#define cpu_is_am335x() 0 #define cpu_is_omap44xx() 0 #define cpu_is_omap443x() 0 #define cpu_is_omap446x() 0 +#define cpu_is_omap447x() 0 #if defined(MULTI_OMAP1) # if defined(CONFIG_ARCH_OMAP730) @@ -322,7 +356,11 @@ IS_OMAP_TYPE(3517, 0x3517) # undef cpu_is_omap3530 # undef cpu_is_omap3505 # undef cpu_is_omap3517 +# undef cpu_is_ti81xx # undef cpu_is_ti816x +# undef cpu_is_ti814x +# undef cpu_is_am33xx +# undef cpu_is_am335x # define cpu_is_omap3430() is_omap3430() # define cpu_is_omap3503() (cpu_is_omap3430() && \ (!omap3_has_iva()) && \ @@ -339,16 +377,22 @@ IS_OMAP_TYPE(3517, 0x3517) !omap3_has_sgx()) # undef cpu_is_omap3630 # define cpu_is_omap3630() is_omap363x() +# define cpu_is_ti81xx() is_ti81xx() # define cpu_is_ti816x() is_ti816x() +# define cpu_is_ti814x() is_ti814x() +# define cpu_is_am33xx() is_am33xx() +# define cpu_is_am335x() is_am335x() #endif # if defined(CONFIG_ARCH_OMAP4) # undef cpu_is_omap44xx # undef cpu_is_omap443x # undef cpu_is_omap446x +# undef cpu_is_omap447x # define cpu_is_omap44xx() is_omap44xx() # define cpu_is_omap443x() is_omap443x() # define cpu_is_omap446x() is_omap446x() +# define cpu_is_omap447x() is_omap447x() # endif /* Macros to detect if we have OMAP1 or OMAP2 */ @@ -386,15 +430,27 @@ IS_OMAP_TYPE(3517, 0x3517) #define TI8168_REV_ES1_0 TI816X_CLASS #define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) +#define TI814X_CLASS 0x81400034 +#define TI8148_REV_ES1_0 TI814X_CLASS +#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8)) +#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8)) + +#define AM335X_CLASS 0x33500034 +#define AM335X_REV_ES1_0 AM335X_CLASS + #define OMAP443X_CLASS 0x44300044 #define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) #define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8)) #define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8)) #define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8)) +#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8)) #define OMAP446X_CLASS 0x44600044 #define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8)) +#define OMAP447X_CLASS 0x44700044 +#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8)) + void omap2_check_revision(void); /* diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h index e87efe1499b8..e897978371c2 100644 --- a/arch/arm/plat-omap/include/plat/hardware.h +++ b/arch/arm/plat-omap/include/plat/hardware.h @@ -286,6 +286,7 @@ #include <plat/omap24xx.h> #include <plat/omap34xx.h> #include <plat/omap44xx.h> -#include <plat/ti816x.h> +#include <plat/ti81xx.h> +#include <plat/am33xx.h> #endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h index 7f2969eadb85..0696bae1818b 100644 --- a/arch/arm/plat-omap/include/plat/io.h +++ b/arch/arm/plat-omap/include/plat/io.h @@ -73,6 +73,9 @@ #define OMAP4_L3_IO_OFFSET 0xb4000000 #define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */ +#define AM33XX_L4_WK_IO_OFFSET 0xb5000000 +#define AM33XX_L4_WK_IO_ADDRESS(pa) IOMEM((pa) + AM33XX_L4_WK_IO_OFFSET) + #define OMAP4_L3_PER_IO_OFFSET 0xb1100000 #define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET) @@ -154,6 +157,15 @@ #define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ /* + * ---------------------------------------------------------------------------- + * AM33XX specific IO mapping + * ---------------------------------------------------------------------------- + */ +#define L4_WK_AM33XX_PHYS L4_WK_AM33XX_BASE +#define L4_WK_AM33XX_VIRT (L4_WK_AM33XX_PHYS + AM33XX_L4_WK_IO_OFFSET) +#define L4_WK_AM33XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ + +/* * Need to look at the Size 4M for L4. * VPOM3430 was not working for Int controller */ @@ -247,8 +259,6 @@ * NOTE: Please use ioremap + __raw_read/write where possible instead of these */ -void omap_ioremap_init(void); - extern u8 omap_readb(u32 pa); extern u16 omap_readw(u32 pa); extern u32 omap_readl(u32 pa); @@ -257,83 +267,9 @@ extern void omap_writew(u16 v, u32 pa); extern void omap_writel(u32 v, u32 pa); struct omap_sdrc_params; - -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) -void omap7xx_map_io(void); -#else -static inline void omap_map_io(void) -{ -} -#endif - -#ifdef CONFIG_ARCH_OMAP15XX -void omap15xx_map_io(void); -#else -static inline void omap15xx_map_io(void) -{ -} -#endif - -#ifdef CONFIG_ARCH_OMAP16XX -void omap16xx_map_io(void); -#else -static inline void omap16xx_map_io(void) -{ -} -#endif - -void omap1_init_early(void); - -#ifdef CONFIG_SOC_OMAP2420 -extern void omap242x_map_common_io(void); -#else -static inline void omap242x_map_common_io(void) -{ -} -#endif - -#ifdef CONFIG_SOC_OMAP2430 -extern void omap243x_map_common_io(void); -#else -static inline void omap243x_map_common_io(void) -{ -} -#endif - -#ifdef CONFIG_ARCH_OMAP3 -extern void omap34xx_map_common_io(void); -#else -static inline void omap34xx_map_common_io(void) -{ -} -#endif - -#ifdef CONFIG_SOC_OMAPTI816X -extern void omapti816x_map_common_io(void); -#else -static inline void omapti816x_map_common_io(void) -{ -} -#endif - -#ifdef CONFIG_ARCH_OMAP4 -extern void omap44xx_map_common_io(void); -#else -static inline void omap44xx_map_common_io(void) -{ -} -#endif - -extern void omap2_init_common_infrastructure(void); extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1); -#define __arch_ioremap omap_ioremap -#define __arch_iounmap omap_iounmap - -void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type); -void omap_iounmap(volatile void __iomem *addr); - extern void __init omap_init_consistent_dma_size(void); #endif diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h index a1d79ee19250..88be3e628b33 100644 --- a/arch/arm/plat-omap/include/plat/iommu.h +++ b/arch/arm/plat-omap/include/plat/iommu.h @@ -111,6 +111,32 @@ struct iommu_platform_data { u32 da_end; }; +/** + * struct iommu_arch_data - omap iommu private data + * @name: name of the iommu device + * @iommu_dev: handle of the iommu device + * + * This is an omap iommu private data object, which binds an iommu user + * to its iommu device. This object should be placed at the iommu user's + * dev_archdata so generic IOMMU API can be used without having to + * utilize omap-specific plumbing anymore. + */ +struct omap_iommu_arch_data { + const char *name; + struct omap_iommu *iommu_dev; +}; + +/** + * dev_to_omap_iommu() - retrieves an omap iommu object from a user device + * @dev: iommu client device + */ +static inline struct omap_iommu *dev_to_omap_iommu(struct device *dev) +{ + struct omap_iommu_arch_data *arch_data = dev->archdata.iommu; + + return arch_data->iommu_dev; +} + /* IOMMU errors */ #define OMAP_IOMMU_ERR_TLB_MISS (1 << 0) #define OMAP_IOMMU_ERR_TRANS_FAULT (1 << 1) @@ -163,8 +189,8 @@ extern int omap_iommu_set_isr(const char *name, void *priv), void *isr_priv); -extern void omap_iommu_save_ctx(struct omap_iommu *obj); -extern void omap_iommu_restore_ctx(struct omap_iommu *obj); +extern void omap_iommu_save_ctx(struct device *dev); +extern void omap_iommu_restore_ctx(struct device *dev); extern int omap_install_iommu_arch(const struct iommu_functions *ops); extern void omap_uninstall_iommu_arch(const struct iommu_functions *ops); @@ -176,6 +202,5 @@ extern ssize_t omap_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len); extern size_t omap_dump_tlb_entries(struct omap_iommu *obj, char *buf, ssize_t len); -struct device *omap_find_iommu_device(const char *name); #endif /* __MACH_IOMMU_H */ diff --git a/arch/arm/plat-omap/include/plat/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h index 6af1a91c0f36..498e57cda6cd 100644 --- a/arch/arm/plat-omap/include/plat/iovmm.h +++ b/arch/arm/plat-omap/include/plat/iovmm.h @@ -72,18 +72,18 @@ struct iovm_struct { #define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT)) -extern struct iovm_struct *omap_find_iovm_area(struct omap_iommu *obj, u32 da); +extern struct iovm_struct *omap_find_iovm_area(struct device *dev, u32 da); extern u32 -omap_iommu_vmap(struct iommu_domain *domain, struct omap_iommu *obj, u32 da, +omap_iommu_vmap(struct iommu_domain *domain, struct device *dev, u32 da, const struct sg_table *sgt, u32 flags); extern struct sg_table *omap_iommu_vunmap(struct iommu_domain *domain, - struct omap_iommu *obj, u32 da); + struct device *dev, u32 da); extern u32 -omap_iommu_vmalloc(struct iommu_domain *domain, struct omap_iommu *obj, +omap_iommu_vmalloc(struct iommu_domain *domain, struct device *dev, u32 da, size_t bytes, u32 flags); extern void -omap_iommu_vfree(struct iommu_domain *domain, struct omap_iommu *obj, +omap_iommu_vfree(struct iommu_domain *domain, struct device *dev, const u32 da); -extern void *omap_da_to_va(struct omap_iommu *obj, u32 da); +extern void *omap_da_to_va(struct device *dev, u32 da); #endif /* __IOMMU_MMAP_H */ diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 30e10719b774..2efd6454bce0 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -357,7 +357,7 @@ #define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69 #define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70 #define INT_35XX_USBOTG_IRQ 71 -#define INT_35XX_UART4 84 +#define INT_35XX_UART4_IRQ 84 #define INT_35XX_CCDC_VD0_IRQ 88 #define INT_35XX_CCDC_VD1_IRQ 92 #define INT_35XX_CCDC_VD2_IRQ 93 @@ -436,20 +436,6 @@ #define INTCPS_NR_MIR_REGS 3 #define INTCPS_NR_IRQS 96 -#ifndef __ASSEMBLY__ -extern void __iomem *omap_irq_base; -void omap1_init_irq(void); -void omap2_init_irq(void); -void omap3_init_irq(void); -void ti816x_init_irq(void); -extern int omap_irq_pending(void); -void omap_intc_save_context(void); -void omap_intc_restore_context(void); -void omap3_intc_suspend(void); -void omap3_intc_prepare_idle(void); -void omap3_intc_resume_idle(void); -#endif - #include <mach/hardware.h> #ifdef CONFIG_FIQ diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index 94cf70afb236..f75946c3293d 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -96,6 +96,7 @@ struct omap_mmc_platform_data { */ u8 wires; /* Used for the MMC driver on omap1 and 2420 */ u32 caps; /* Used for the MMC driver on 2430 and later */ + u32 pm_caps; /* PM capabilities of the mmc */ /* * nomux means "standard" muxing is wrong on this board, and diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h new file mode 100644 index 000000000000..64f9d1c7f1bb --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap-secure.h @@ -0,0 +1,13 @@ +#ifndef __OMAP_SECURE_H__ +#define __OMAP_SECURE_H__ + +#include <linux/types.h> + +#ifdef CONFIG_ARCH_OMAP2PLUS +extern int omap_secure_ram_reserve_memblock(void); +#else +static inline void omap_secure_ram_reserve_memblock(void) +{ } +#endif + +#endif /* __OMAP_SECURE_H__ */ diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 2682043f5a5b..9ff444469f3d 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -19,6 +19,7 @@ #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/pm_qos.h> #include <plat/mux.h> @@ -33,6 +34,8 @@ #define OMAP_MODE13X_SPEED 230400 +#define OMAP_UART_SCR_TX_EMPTY 0x08 + /* WER = 0x7F * Enable module level wakeup in WER reg */ @@ -51,18 +54,27 @@ #define OMAP_UART_DMA_CH_FREE -1 -#define RX_TIMEOUT (3 * HZ) #define OMAP_MAX_HSUART_PORTS 4 #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA +#define UART_ERRATA_i202_MDR1_ACCESS BIT(0) +#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1) + struct omap_uart_port_info { bool dma_enabled; /* To specify DMA Mode */ unsigned int uartclk; /* UART clock rate */ - void __iomem *membase; /* ioremap cookie or NULL */ - resource_size_t mapbase; /* resource base */ - unsigned long irqflags; /* request_irq flags */ upf_t flags; /* UPF_* flags */ + u32 errata; + unsigned int dma_rx_buf_size; + unsigned int dma_rx_timeout; + unsigned int autosuspend_timeout; + unsigned int dma_rx_poll_rate; + + int (*get_context_loss_count)(struct device *); + void (*set_forceidle)(struct platform_device *); + void (*set_noidle)(struct platform_device *); + void (*enable_wakeup)(struct platform_device *, bool); }; struct uart_omap_dma { @@ -86,8 +98,9 @@ struct uart_omap_dma { spinlock_t rx_lock; /* timer to poll activity on rx dma */ struct timer_list rx_timer; - int rx_buf_size; - int rx_timeout; + unsigned int rx_buf_size; + unsigned int rx_poll_rate; + unsigned int rx_timeout; }; struct uart_omap_port { @@ -100,6 +113,10 @@ struct uart_omap_port { unsigned char mcr; unsigned char fcr; unsigned char efr; + unsigned char dll; + unsigned char dlh; + unsigned char mdr1; + unsigned char scr; int use_dma; /* @@ -111,6 +128,14 @@ struct uart_omap_port { unsigned char msr_saved_flags; char name[20]; unsigned long port_activity; + u32 context_loss_cnt; + u32 errata; + u8 wakeups_enabled; + + struct pm_qos_request pm_qos_request; + u32 latency; + u32 calc_latency; + struct work_struct qos_work; }; #endif /* __OMAP_SERIAL_H__ */ diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h index b9e85886b9d6..0d818acf3917 100644 --- a/arch/arm/plat-omap/include/plat/omap34xx.h +++ b/arch/arm/plat-omap/include/plat/omap34xx.h @@ -35,6 +35,8 @@ #define L4_EMU_34XX_BASE 0x54000000 #define L3_34XX_BASE 0x68000000 +#define L4_WK_AM33XX_BASE 0x44C00000 + #define OMAP3430_32KSYNCT_BASE 0x48320000 #define OMAP3430_CM_BASE 0x48004800 #define OMAP3430_PRM_BASE 0x48306800 diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h index ea2b8a6306e7..c0d478e55c84 100644 --- a/arch/arm/plat-omap/include/plat/omap44xx.h +++ b/arch/arm/plat-omap/include/plat/omap44xx.h @@ -45,6 +45,7 @@ #define OMAP44XX_WKUPGEN_BASE 0x48281000 #define OMAP44XX_MCPDM_BASE 0x40132000 #define OMAP44XX_MCPDM_L3_BASE 0x49032000 +#define OMAP44XX_SAR_RAM_BASE 0x4a326000 #define OMAP44XX_MAILBOX_BASE (L4_44XX_BASE + 0xF4000) #define OMAP44XX_HSUSB_OTG_BASE (L4_44XX_BASE + 0xAB000) diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 8b372ede17c1..647010109afa 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -97,6 +97,7 @@ struct omap_hwmod_mux_info { struct omap_device_pad *pads; int nr_pads_dynamic; struct omap_device_pad **pads_dynamic; + int *irqs; bool enabled; }; @@ -416,10 +417,13 @@ struct omap_hwmod_omap4_prcm { * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached + * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) - + * causes the first call to _enable() to only update the pinmux */ #define _HWMOD_NO_MPU_PORT (1 << 0) #define _HWMOD_WAKEUP_ENABLED (1 << 1) #define _HWMOD_SYSCONFIG_LOADED (1 << 2) +#define _HWMOD_SKIP_ENABLE (1 << 3) /* * omap_hwmod._state definitions @@ -604,6 +608,8 @@ int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh); int omap_hwmod_no_setup_reset(struct omap_hwmod *oh); +int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx); + /* * Chip variant-specific hwmod init routines - XXX should be converted * to use initcalls once the initial boot ordering is straightened out diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 1ab9fd6abe6d..198d1e6a4a6c 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -2,7 +2,7 @@ * arch/arm/plat-omap/include/mach/serial.h * * Copyright (C) 2009 Texas Instruments - * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> + * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -44,6 +44,7 @@ #define OMAP3_UART2_BASE OMAP2_UART2_BASE #define OMAP3_UART3_BASE 0x49020000 #define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */ +#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */ /* OMAP4 serial ports */ #define OMAP4_UART1_BASE OMAP2_UART1_BASE @@ -51,10 +52,10 @@ #define OMAP4_UART3_BASE 0x48020000 #define OMAP4_UART4_BASE 0x4806e000 -/* TI816X serial ports */ -#define TI816X_UART1_BASE 0x48020000 -#define TI816X_UART2_BASE 0x48022000 -#define TI816X_UART3_BASE 0x48024000 +/* TI81XX serial ports */ +#define TI81XX_UART1_BASE 0x48020000 +#define TI81XX_UART2_BASE 0x48022000 +#define TI81XX_UART3_BASE 0x48024000 /* AM3505/3517 UART4 */ #define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ @@ -89,9 +90,9 @@ #define OMAP4UART2 OMAP2UART2 #define OMAP4UART3 43 #define OMAP4UART4 44 -#define TI816XUART1 81 -#define TI816XUART2 82 -#define TI816XUART3 83 +#define TI81XXUART1 81 +#define TI81XXUART2 82 +#define TI81XXUART3 83 #define ZOOM_UART 95 /* Only on zoom2/3 */ /* This is only used by 8250.c for omap1510 */ @@ -106,15 +107,13 @@ #ifndef __ASSEMBLER__ struct omap_board_data; +struct omap_uart_port_info; extern void omap_serial_init(void); -extern void omap_serial_init_port(struct omap_board_data *bdata); extern int omap_uart_can_sleep(void); -extern void omap_uart_check_wakeup(void); -extern void omap_uart_prepare_suspend(void); -extern void omap_uart_prepare_idle(int num); -extern void omap_uart_resume_idle(int num); -extern void omap_uart_enable_irqs(int enable); +extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); +extern void omap_serial_init_port(struct omap_board_data *bdata, + struct omap_uart_port_info *platform_data); #endif #endif diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h index f500fc34d065..75aa1b2bef51 100644 --- a/arch/arm/plat-omap/include/plat/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -95,6 +95,10 @@ static inline void omap_push_sram_idle(void) {} */ #define OMAP2_SRAM_PA 0x40200000 #define OMAP3_SRAM_PA 0x40200000 +#ifdef CONFIG_OMAP4_ERRATA_I688 +#define OMAP4_SRAM_PA 0x40304000 +#define OMAP4_SRAM_VA 0xfe404000 +#else #define OMAP4_SRAM_PA 0x40300000 - +#endif #endif diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h index c5fa9e929009..8e5ebd74b129 100644 --- a/arch/arm/plat-omap/include/plat/system.h +++ b/arch/arm/plat-omap/include/plat/system.h @@ -12,6 +12,4 @@ static inline void arch_idle(void) cpu_do_idle(); } -extern void (*arch_reset)(char, const char *); - #endif diff --git a/arch/arm/plat-omap/include/plat/ti816x.h b/arch/arm/plat-omap/include/plat/ti81xx.h index 50510f5dda1e..8f9843f78422 100644 --- a/arch/arm/plat-omap/include/plat/ti816x.h +++ b/arch/arm/plat-omap/include/plat/ti81xx.h @@ -1,5 +1,5 @@ /* - * This file contains the address data for various TI816X modules. + * This file contains the address data for various TI81XX modules. * * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/ * @@ -13,15 +13,15 @@ * GNU General Public License for more details. */ -#ifndef __ASM_ARCH_TI816X_H -#define __ASM_ARCH_TI816X_H +#ifndef __ASM_ARCH_TI81XX_H +#define __ASM_ARCH_TI81XX_H -#define L4_SLOW_TI816X_BASE 0x48000000 +#define L4_SLOW_TI81XX_BASE 0x48000000 -#define TI816X_SCM_BASE 0x48140000 -#define TI816X_CTRL_BASE TI816X_SCM_BASE -#define TI816X_PRCM_BASE 0x48180000 +#define TI81XX_SCM_BASE 0x48140000 +#define TI81XX_CTRL_BASE TI81XX_SCM_BASE +#define TI81XX_PRCM_BASE 0x48180000 -#define TI816X_ARM_INTC_BASE 0x48200000 +#define TI81XX_ARM_INTC_BASE 0x48200000 -#endif /* __ASM_ARCH_TI816X_H */ +#endif /* __ASM_ARCH_TI81XX_H */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 2f472e989ec6..6ee90495ca4c 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -99,9 +99,9 @@ static inline void flush(void) #define DEBUG_LL_ZOOM(mach) \ _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) -#define DEBUG_LL_TI816X(p, mach) \ - _DEBUG_LL_ENTRY(mach, TI816X_UART##p##_BASE, OMAP_PORT_SHIFT, \ - TI816XUART##p) +#define DEBUG_LL_TI81XX(p, mach) \ + _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ + TI81XXUART##p) static inline void __arch_decomp_setup(unsigned long arch_id) { @@ -177,7 +177,10 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_ZOOM(omap_zoom3); /* TI8168 base boards using UART3 */ - DEBUG_LL_TI816X(3, ti8168evm); + DEBUG_LL_TI81XX(3, ti8168evm); + + /* TI8148 base boards using UART1 */ + DEBUG_LL_TI81XX(1, ti8148evm); } while (0); } diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 17d3c939775c..dc864b580da0 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -100,9 +100,6 @@ extern void usb_musb_init(struct omap_musb_board_data *board_data); extern void usbhs_init(const struct usbhs_omap_board_data *pdata); -extern int omap_usbhs_enable(struct device *dev); -extern void omap_usbhs_disable(struct device *dev); - extern int omap4430_phy_power(struct device *dev, int ID, int on); extern int omap4430_phy_set_clk(struct device *dev, int on); extern int omap4430_phy_init(struct device *dev); @@ -114,6 +111,7 @@ extern void am35x_musb_reset(void); extern void am35x_musb_phy_power(u8 on); extern void am35x_musb_clear_irq(void); extern void am35x_set_mode(u8 musb_mode); +extern void ti81xx_musb_phy_power(u8 on); /* * FIXME correct answer depends on hmc_mode, @@ -273,6 +271,37 @@ static inline void omap2_usbfs_init(struct omap_usb_config *pdata) #define CONF2_OTGPWRDN (1 << 2) #define CONF2_DATPOL (1 << 1) +/* TI81XX specific definitions */ +#define USBCTRL0 0x620 +#define USBSTAT0 0x624 + +/* TI816X PHY controls bits */ +#define TI816X_USBPHY0_NORMAL_MODE (1 << 0) +#define TI816X_USBPHY_REFCLK_OSC (1 << 8) + +/* TI814X PHY controls bits */ +#define USBPHY_CM_PWRDN (1 << 0) +#define USBPHY_OTG_PWRDN (1 << 1) +#define USBPHY_CHGDET_DIS (1 << 2) +#define USBPHY_CHGDET_RSTRT (1 << 3) +#define USBPHY_SRCONDM (1 << 4) +#define USBPHY_SINKONDP (1 << 5) +#define USBPHY_CHGISINK_EN (1 << 6) +#define USBPHY_CHGVSRC_EN (1 << 7) +#define USBPHY_DMPULLUP (1 << 8) +#define USBPHY_DPPULLUP (1 << 9) +#define USBPHY_CDET_EXTCTL (1 << 10) +#define USBPHY_GPIO_MODE (1 << 12) +#define USBPHY_DPOPBUFCTL (1 << 13) +#define USBPHY_DMOPBUFCTL (1 << 14) +#define USBPHY_DPINPUT (1 << 15) +#define USBPHY_DMINPUT (1 << 16) +#define USBPHY_DPGPIO_PD (1 << 17) +#define USBPHY_DMGPIO_PD (1 << 18) +#define USBPHY_OTGVDET_EN (1 << 19) +#define USBPHY_OTGSESSEND_EN (1 << 20) +#define USBPHY_DATA_POLARITY (1 << 23) + #if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB) u32 omap1_usb0_init(unsigned nwires, unsigned is_device); u32 omap1_usb1_init(unsigned nwires); diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c deleted file mode 100644 index 333871f59995..000000000000 --- a/arch/arm/plat-omap/io.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * Common io.c file - * This file is created by Russell King <rmk+kernel@arm.linux.org.uk> - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/io.h> -#include <linux/mm.h> -#include <linux/dma-mapping.h> - -#include <plat/omap7xx.h> -#include <plat/omap1510.h> -#include <plat/omap16xx.h> -#include <plat/omap24xx.h> -#include <plat/omap34xx.h> -#include <plat/omap44xx.h> - -#define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz))) -#define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst))) - -static int initialized; - -/* - * Intercept ioremap() requests for addresses in our fixed mapping regions. - */ -void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) -{ - - WARN(!initialized, "Do not use ioremap before init_early\n"); - -#ifdef CONFIG_ARCH_OMAP1 - if (cpu_class_is_omap1()) { - if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE)) - return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT); - } - if (cpu_is_omap7xx()) { - if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE)) - return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START); - - if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE)) - return XLATE(p, OMAP7XX_DSPREG_BASE, - OMAP7XX_DSPREG_START); - } - if (cpu_is_omap15xx()) { - if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE)) - return XLATE(p, OMAP1510_DSP_BASE, OMAP1510_DSP_START); - - if (BETWEEN(p, OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_SIZE)) - return XLATE(p, OMAP1510_DSPREG_BASE, - OMAP1510_DSPREG_START); - } - if (cpu_is_omap16xx()) { - if (BETWEEN(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_SIZE)) - return XLATE(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_START); - - if (BETWEEN(p, OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_SIZE)) - return XLATE(p, OMAP16XX_DSPREG_BASE, - OMAP16XX_DSPREG_START); - } -#endif -#ifdef CONFIG_ARCH_OMAP2 - if (cpu_is_omap24xx()) { - if (BETWEEN(p, L3_24XX_PHYS, L3_24XX_SIZE)) - return XLATE(p, L3_24XX_PHYS, L3_24XX_VIRT); - if (BETWEEN(p, L4_24XX_PHYS, L4_24XX_SIZE)) - return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT); - } - if (cpu_is_omap2420()) { - if (BETWEEN(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_SIZE)) - return XLATE(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_VIRT); - if (BETWEEN(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE)) - return XLATE(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE); - if (BETWEEN(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_SIZE)) - return XLATE(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_VIRT); - } - if (cpu_is_omap2430()) { - if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE)) - return XLATE(p, L4_WK_243X_PHYS, L4_WK_243X_VIRT); - if (BETWEEN(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_SIZE)) - return XLATE(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT); - if (BETWEEN(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_SIZE)) - return XLATE(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_VIRT); - if (BETWEEN(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_SIZE)) - return XLATE(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_VIRT); - } -#endif -#ifdef CONFIG_ARCH_OMAP3 - if (cpu_is_ti816x()) { - if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE)) - return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT); - } else if (cpu_is_omap34xx()) { - if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE)) - return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT); - if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE)) - return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT); - if (BETWEEN(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_SIZE)) - return XLATE(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_VIRT); - if (BETWEEN(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_SIZE)) - return XLATE(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_VIRT); - if (BETWEEN(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_SIZE)) - return XLATE(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_VIRT); - if (BETWEEN(p, L4_PER_34XX_PHYS, L4_PER_34XX_SIZE)) - return XLATE(p, L4_PER_34XX_PHYS, L4_PER_34XX_VIRT); - if (BETWEEN(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_SIZE)) - return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT); - } -#endif -#ifdef CONFIG_ARCH_OMAP4 - if (cpu_is_omap44xx()) { - if (BETWEEN(p, L3_44XX_PHYS, L3_44XX_SIZE)) - return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT); - if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE)) - return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT); - if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE)) - return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT); - if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE)) - return XLATE(p, OMAP44XX_EMIF1_PHYS, \ - OMAP44XX_EMIF1_VIRT); - if (BETWEEN(p, OMAP44XX_EMIF2_PHYS, OMAP44XX_EMIF2_SIZE)) - return XLATE(p, OMAP44XX_EMIF2_PHYS, \ - OMAP44XX_EMIF2_VIRT); - if (BETWEEN(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_SIZE)) - return XLATE(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_VIRT); - if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE)) - return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT); - if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE)) - return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT); - } -#endif - return __arm_ioremap_caller(p, size, type, __builtin_return_address(0)); -} -EXPORT_SYMBOL(omap_ioremap); - -void omap_iounmap(volatile void __iomem *addr) -{ - unsigned long virt = (unsigned long)addr; - - if (virt >= VMALLOC_START && virt < VMALLOC_END) - __iounmap(addr); -} -EXPORT_SYMBOL(omap_iounmap); - -void __init omap_init_consistent_dma_size(void) -{ -#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE - init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20); -#endif -} - -void __init omap_ioremap_init(void) -{ - initialized++; -} diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 8b28664d1c62..4243bdcc87bc 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -40,7 +40,11 @@ #define OMAP1_SRAM_PA 0x20000000 #define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) #define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) +#ifdef CONFIG_OMAP4_ERRATA_I688 +#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA +#else #define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) +#endif #if defined(CONFIG_ARCH_OMAP2PLUS) #define SRAM_BOOTLOADER_SZ 0x00 @@ -141,11 +145,9 @@ static void __init omap_detect_sram(void) omap_sram_size = 0x32000; /* 200K */ else if (cpu_is_omap15xx()) omap_sram_size = 0x30000; /* 192K */ - else if (cpu_is_omap1610() || cpu_is_omap1621() || - cpu_is_omap1710()) + else if (cpu_is_omap1610() || cpu_is_omap1611() || + cpu_is_omap1621() || cpu_is_omap1710()) omap_sram_size = 0x4000; /* 16K */ - else if (cpu_is_omap1611()) - omap_sram_size = SZ_256K; else { pr_err("Could not detect SRAM size\n"); omap_sram_size = 0x4000; @@ -163,6 +165,10 @@ static void __init omap_map_sram(void) if (omap_sram_size == 0) return; +#ifdef CONFIG_OMAP4_ERRATA_I688 + omap_sram_start += PAGE_SIZE; + omap_sram_size -= SZ_16K; +#endif if (cpu_is_omap34xx()) { /* * SRAM must be marked as non-cached on OMAP3 since the @@ -224,6 +230,9 @@ static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) { BUG_ON(!_omap_sram_reprogram_clock); + /* On 730, bit 13 must always be 1 */ + if (cpu_is_omap7xx()) + ckctl |= 0x2000; _omap_sram_reprogram_clock(dpllctl, ckctl); } diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index 95a5fc53b6db..c20ce0f5ce33 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := irq.o pcie.o time.o common.o mpp.o +obj-y := irq.o pcie.o time.o common.o mpp.o addr-map.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c new file mode 100644 index 000000000000..367ca89ac403 --- /dev/null +++ b/arch/arm/plat-orion/addr-map.c @@ -0,0 +1,174 @@ +/* + * arch/arm/plat-orion/addr-map.c + * + * Address map functions for Marvell Orion based SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/mbus.h> +#include <linux/io.h> +#include <plat/addr-map.h> + +struct mbus_dram_target_info orion_mbus_dram_info; + +const struct mbus_dram_target_info *mv_mbus_dram_info(void) +{ + return &orion_mbus_dram_info; +} +EXPORT_SYMBOL_GPL(mv_mbus_dram_info); + +/* + * DDR target is the same on all Orion platforms. + */ +#define TARGET_DDR 0 + +/* + * Helpers to get DDR bank info + */ +#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) +#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) + +/* + * CPU Address Decode Windows registers + */ +#define WIN_CTRL_OFF 0x0000 +#define WIN_BASE_OFF 0x0004 +#define WIN_REMAP_LO_OFF 0x0008 +#define WIN_REMAP_HI_OFF 0x000c + +/* + * Default implementation + */ +static void __init __iomem * +orion_win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) +{ + return (void __iomem *)(cfg->bridge_virt_base + (win << 4)); +} + +/* + * Default implementation + */ +static int __init orion_cpu_win_can_remap(const struct orion_addr_map_cfg *cfg, + const int win) +{ + if (win < cfg->remappable_wins) + return 1; + + return 0; +} + +void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg, + const int win, const u32 base, + const u32 size, const u8 target, + const u8 attr, const int remap) +{ + void __iomem *addr = cfg->win_cfg_base(cfg, win); + u32 ctrl, base_high, remap_addr; + + if (win >= cfg->num_wins) { + printk(KERN_ERR "setup_cpu_win: trying to allocate window " + "%d when only %d allowed\n", win, cfg->num_wins); + } + + base_high = base & 0xffff0000; + ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1; + + writel(base_high, addr + WIN_BASE_OFF); + writel(ctrl, addr + WIN_CTRL_OFF); + if (cfg->cpu_win_can_remap(cfg, win)) { + if (remap < 0) + remap_addr = base; + else + remap_addr = remap; + writel(remap_addr & 0xffff0000, addr + WIN_REMAP_LO_OFF); + writel(0, addr + WIN_REMAP_HI_OFF); + } +} + +/* + * Configure a number of windows. + */ +static void __init orion_setup_cpu_wins(const struct orion_addr_map_cfg * cfg, + const struct orion_addr_map_info *info) +{ + while (info->win != -1) { + orion_setup_cpu_win(cfg, info->win, info->base, info->size, + info->target, info->attr, info->remap); + info++; + } +} + +static void __init orion_disable_wins(const struct orion_addr_map_cfg * cfg) +{ + void __iomem *addr; + int i; + + for (i = 0; i < cfg->num_wins; i++) { + addr = cfg->win_cfg_base(cfg, i); + + writel(0, addr + WIN_BASE_OFF); + writel(0, addr + WIN_CTRL_OFF); + if (cfg->cpu_win_can_remap(cfg, i)) { + writel(0, addr + WIN_REMAP_LO_OFF); + writel(0, addr + WIN_REMAP_HI_OFF); + } + } +} + +/* + * Disable, clear and configure windows. + */ +void __init orion_config_wins(struct orion_addr_map_cfg * cfg, + const struct orion_addr_map_info *info) +{ + if (!cfg->cpu_win_can_remap) + cfg->cpu_win_can_remap = orion_cpu_win_can_remap; + + if (!cfg->win_cfg_base) + cfg->win_cfg_base = orion_win_cfg_base; + + orion_disable_wins(cfg); + + if (info) + orion_setup_cpu_wins(cfg, info); +} + +/* + * Setup MBUS dram target info. + */ +void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, + const u32 ddr_window_cpu_base) +{ + void __iomem *addr; + int i; + int cs; + + orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; + + addr = (void __iomem *)ddr_window_cpu_base; + + for (i = 0, cs = 0; i < 4; i++) { + u32 base = readl(addr + DDR_BASE_CS_OFF(i)); + u32 size = readl(addr + DDR_SIZE_CS_OFF(i)); + + /* + * Chip select enabled? + */ + if (size & 1) { + struct mbus_dram_window *w; + + w = &orion_mbus_dram_info.cs[cs++]; + w->cs_index = i; + w->mbus_attr = 0xf & ~(1 << i); + w->base = base & 0xffff0000; + w->size = (size | 0x0000ffff) + 1; + } + } + orion_mbus_dram_info.num_cs = cs; +} diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 9e5451b3c8e3..e5a2fde29b19 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -13,7 +13,6 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/serial_8250.h> -#include <linux/mbus.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/mv643xx_i2c.h> @@ -203,13 +202,12 @@ void __init orion_rtc_init(unsigned long mapbase, ****************************************************************************/ static __init void ge_complete( struct mv643xx_eth_shared_platform_data *orion_ge_shared_data, - struct mbus_dram_target_info *mbus_dram_info, int tclk, + int tclk, struct resource *orion_ge_resource, unsigned long irq, struct platform_device *orion_ge_shared, struct mv643xx_eth_platform_data *eth_data, struct platform_device *orion_ge) { - orion_ge_shared_data->dram = mbus_dram_info; orion_ge_shared_data->t_clk = tclk; orion_ge_resource->start = irq; orion_ge_resource->end = irq; @@ -259,7 +257,6 @@ static struct platform_device orion_ge00 = { }; void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, - struct mbus_dram_target_info *mbus_dram_info, unsigned long mapbase, unsigned long irq, unsigned long irq_err, @@ -267,7 +264,7 @@ void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, { fill_resources(&orion_ge00_shared, orion_ge00_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); - ge_complete(&orion_ge00_shared_data, mbus_dram_info, tclk, + ge_complete(&orion_ge00_shared_data, tclk, orion_ge00_resources, irq, &orion_ge00_shared, eth_data, &orion_ge00); } @@ -313,7 +310,6 @@ static struct platform_device orion_ge01 = { }; void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, - struct mbus_dram_target_info *mbus_dram_info, unsigned long mapbase, unsigned long irq, unsigned long irq_err, @@ -321,7 +317,7 @@ void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, { fill_resources(&orion_ge01_shared, orion_ge01_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); - ge_complete(&orion_ge01_shared_data, mbus_dram_info, tclk, + ge_complete(&orion_ge01_shared_data, tclk, orion_ge01_resources, irq, &orion_ge01_shared, eth_data, &orion_ge01); } @@ -367,7 +363,6 @@ static struct platform_device orion_ge10 = { }; void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, - struct mbus_dram_target_info *mbus_dram_info, unsigned long mapbase, unsigned long irq, unsigned long irq_err, @@ -375,7 +370,7 @@ void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, { fill_resources(&orion_ge10_shared, orion_ge10_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); - ge_complete(&orion_ge10_shared_data, mbus_dram_info, tclk, + ge_complete(&orion_ge10_shared_data, tclk, orion_ge10_resources, irq, &orion_ge10_shared, eth_data, &orion_ge10); } @@ -421,7 +416,6 @@ static struct platform_device orion_ge11 = { }; void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data, - struct mbus_dram_target_info *mbus_dram_info, unsigned long mapbase, unsigned long irq, unsigned long irq_err, @@ -429,7 +423,7 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data, { fill_resources(&orion_ge11_shared, orion_ge11_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); - ge_complete(&orion_ge11_shared_data, mbus_dram_info, tclk, + ge_complete(&orion_ge11_shared_data, tclk, orion_ge11_resources, irq, &orion_ge11_shared, eth_data, &orion_ge11); } @@ -592,8 +586,6 @@ void __init orion_wdt_init(unsigned long tclk) /***************************************************************************** * XOR ****************************************************************************/ -static struct mv_xor_platform_shared_data orion_xor_shared_data; - static u64 orion_xor_dmamask = DMA_BIT_MASK(32); void __init orion_xor_init_channels( @@ -632,9 +624,6 @@ static struct resource orion_xor0_shared_resources[] = { static struct platform_device orion_xor0_shared = { .name = MV_XOR_SHARED_NAME, .id = 0, - .dev = { - .platform_data = &orion_xor_shared_data, - }, .num_resources = ARRAY_SIZE(orion_xor0_shared_resources), .resource = orion_xor0_shared_resources, }; @@ -687,14 +676,11 @@ static struct platform_device orion_xor01_channel = { }, }; -void __init orion_xor0_init(struct mbus_dram_target_info *mbus_dram_info, - unsigned long mapbase_low, +void __init orion_xor0_init(unsigned long mapbase_low, unsigned long mapbase_high, unsigned long irq_0, unsigned long irq_1) { - orion_xor_shared_data.dram = mbus_dram_info; - orion_xor0_shared_resources[0].start = mapbase_low; orion_xor0_shared_resources[0].end = mapbase_low + 0xff; orion_xor0_shared_resources[1].start = mapbase_high; @@ -727,9 +713,6 @@ static struct resource orion_xor1_shared_resources[] = { static struct platform_device orion_xor1_shared = { .name = MV_XOR_SHARED_NAME, .id = 1, - .dev = { - .platform_data = &orion_xor_shared_data, - }, .num_resources = ARRAY_SIZE(orion_xor1_shared_resources), .resource = orion_xor1_shared_resources, }; @@ -828,11 +811,9 @@ static struct platform_device orion_ehci = { }, }; -void __init orion_ehci_init(struct mbus_dram_target_info *mbus_dram_info, - unsigned long mapbase, +void __init orion_ehci_init(unsigned long mapbase, unsigned long irq) { - orion_ehci_data.dram = mbus_dram_info; fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1, irq); @@ -854,11 +835,9 @@ static struct platform_device orion_ehci_1 = { }, }; -void __init orion_ehci_1_init(struct mbus_dram_target_info *mbus_dram_info, - unsigned long mapbase, +void __init orion_ehci_1_init(unsigned long mapbase, unsigned long irq) { - orion_ehci_data.dram = mbus_dram_info; fill_resources(&orion_ehci_1, orion_ehci_1_resources, mapbase, SZ_4K - 1, irq); @@ -880,11 +859,9 @@ static struct platform_device orion_ehci_2 = { }, }; -void __init orion_ehci_2_init(struct mbus_dram_target_info *mbus_dram_info, - unsigned long mapbase, +void __init orion_ehci_2_init(unsigned long mapbase, unsigned long irq) { - orion_ehci_data.dram = mbus_dram_info; fill_resources(&orion_ehci_2, orion_ehci_2_resources, mapbase, SZ_4K - 1, irq); @@ -911,11 +888,9 @@ static struct platform_device orion_sata = { }; void __init orion_sata_init(struct mv_sata_platform_data *sata_data, - struct mbus_dram_target_info *mbus_dram_info, unsigned long mapbase, unsigned long irq) { - sata_data->dram = mbus_dram_info; orion_sata.dev.platform_data = sata_data; fill_resources(&orion_sata, orion_sata_resources, mapbase, 0x5000 - 1, irq); diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 41ab97ebe4cf..10d160888133 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -384,12 +384,16 @@ void __init orion_gpio_init(int gpio_base, int ngpio, struct orion_gpio_chip *ochip; struct irq_chip_generic *gc; struct irq_chip_type *ct; + char gc_label[16]; if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips)) return; + snprintf(gc_label, sizeof(gc_label), "orion_gpio%d", + orion_gpio_chip_count); + ochip = orion_gpio_chips + orion_gpio_chip_count; - ochip->chip.label = "orion_gpio"; + ochip->chip.label = kstrdup(gc_label, GFP_KERNEL); ochip->chip.request = orion_gpio_request; ochip->chip.direction_input = orion_gpio_direction_input; ochip->chip.get = orion_gpio_get; diff --git a/arch/arm/plat-orion/include/plat/addr-map.h b/arch/arm/plat-orion/include/plat/addr-map.h new file mode 100644 index 000000000000..fd556f77562c --- /dev/null +++ b/arch/arm/plat-orion/include/plat/addr-map.h @@ -0,0 +1,53 @@ +/* + * arch/arm/plat-orion/include/plat/addr-map.h + * + * Marvell Orion SoC address map handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_ADDR_MAP_H +#define __PLAT_ADDR_MAP_H + +extern struct mbus_dram_target_info orion_mbus_dram_info; + +struct orion_addr_map_cfg { + const int num_wins; /* Total number of windows */ + const int remappable_wins; + const u32 bridge_virt_base; + + /* If NULL, the default cpu_win_can_remap will be used, using + the value in remappable_wins */ + int (*cpu_win_can_remap) (const struct orion_addr_map_cfg *cfg, + const int win); + /* If NULL, the default win_cfg_base will be used, using the + value in bridge_virt_base */ + void __iomem *(*win_cfg_base) (const struct orion_addr_map_cfg *cfg, + const int win); +}; + +/* + * Information needed to setup one address mapping. + */ +struct orion_addr_map_info { + const int win; + const u32 base; + const u32 size; + const u8 target; + const u8 attr; + const int remap; +}; + +void __init orion_config_wins(struct orion_addr_map_cfg *cfg, + const struct orion_addr_map_info *info); + +void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg, + const int win, const u32 base, + const u32 size, const u8 target, + const u8 attr, const int remap); + +void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, + const u32 ddr_window_cpu_base); +#endif diff --git a/arch/arm/plat-orion/include/plat/audio.h b/arch/arm/plat-orion/include/plat/audio.h index 9cf1f781329b..885f8abd927b 100644 --- a/arch/arm/plat-orion/include/plat/audio.h +++ b/arch/arm/plat-orion/include/plat/audio.h @@ -1,11 +1,8 @@ #ifndef __PLAT_AUDIO_H #define __PLAT_AUDIO_H -#include <linux/mbus.h> - struct kirkwood_asoc_platform_data { u32 tclk; - struct mbus_dram_target_info *dram; int burst; }; #endif diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index a63c357e2ab1..0fe08d77e835 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -37,28 +37,24 @@ void __init orion_rtc_init(unsigned long mapbase, unsigned long irq); void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, - struct mbus_dram_target_info *mbus_dram_info, unsigned long mapbase, unsigned long irq, unsigned long irq_err, int tclk); void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, - struct mbus_dram_target_info *mbus_dram_info, unsigned long mapbase, unsigned long irq, unsigned long irq_err, int tclk); void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, - struct mbus_dram_target_info *mbus_dram_info, unsigned long mapbase, unsigned long irq, unsigned long irq_err, int tclk); void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data, - struct mbus_dram_target_info *mbus_dram_info, unsigned long mapbase, unsigned long irq, unsigned long irq_err, @@ -82,8 +78,7 @@ void __init orion_spi_1_init(unsigned long mapbase, void __init orion_wdt_init(unsigned long tclk); -void __init orion_xor0_init(struct mbus_dram_target_info *mbus_dram_info, - unsigned long mapbase_low, +void __init orion_xor0_init(unsigned long mapbase_low, unsigned long mapbase_high, unsigned long irq_0, unsigned long irq_1); @@ -93,20 +88,16 @@ void __init orion_xor1_init(unsigned long mapbase_low, unsigned long irq_0, unsigned long irq_1); -void __init orion_ehci_init(struct mbus_dram_target_info *mbus_dram_info, - unsigned long mapbase, +void __init orion_ehci_init(unsigned long mapbase, unsigned long irq); -void __init orion_ehci_1_init(struct mbus_dram_target_info *mbus_dram_info, - unsigned long mapbase, +void __init orion_ehci_1_init(unsigned long mapbase, unsigned long irq); -void __init orion_ehci_2_init(struct mbus_dram_target_info *mbus_dram_info, - unsigned long mapbase, +void __init orion_ehci_2_init(unsigned long mapbase, unsigned long irq); void __init orion_sata_init(struct mv_sata_platform_data *sata_data, - struct mbus_dram_target_info *mbus_dram_info, unsigned long mapbase, unsigned long irq); diff --git a/arch/arm/plat-orion/include/plat/ehci-orion.h b/arch/arm/plat-orion/include/plat/ehci-orion.h index 4ec668e77460..6fc78e430420 100644 --- a/arch/arm/plat-orion/include/plat/ehci-orion.h +++ b/arch/arm/plat-orion/include/plat/ehci-orion.h @@ -19,7 +19,6 @@ enum orion_ehci_phy_ver { }; struct orion_ehci_data { - struct mbus_dram_target_info *dram; enum orion_ehci_phy_ver phy_version; }; diff --git a/arch/arm/plat-orion/include/plat/mv_xor.h b/arch/arm/plat-orion/include/plat/mv_xor.h index bd5f3bdb4ae3..2ba1f7d76eef 100644 --- a/arch/arm/plat-orion/include/plat/mv_xor.h +++ b/arch/arm/plat-orion/include/plat/mv_xor.h @@ -13,12 +13,6 @@ #define MV_XOR_SHARED_NAME "mv_xor_shared" #define MV_XOR_NAME "mv_xor" -struct mbus_dram_target_info; - -struct mv_xor_platform_shared_data { - struct mbus_dram_target_info *dram; -}; - struct mv_xor_platform_data { struct platform_device *shared; int hw_id; diff --git a/arch/arm/plat-orion/include/plat/mvsdio.h b/arch/arm/plat-orion/include/plat/mvsdio.h index 14ca88676002..1190efedcb94 100644 --- a/arch/arm/plat-orion/include/plat/mvsdio.h +++ b/arch/arm/plat-orion/include/plat/mvsdio.h @@ -12,7 +12,6 @@ #include <linux/mbus.h> struct mvsdio_platform_data { - struct mbus_dram_target_info *dram; unsigned int clock; int gpio_card_detect; int gpio_write_protect; diff --git a/arch/arm/plat-orion/include/plat/pcie.h b/arch/arm/plat-orion/include/plat/pcie.h index cc99163e73fd..fe5b9e862747 100644 --- a/arch/arm/plat-orion/include/plat/pcie.h +++ b/arch/arm/plat-orion/include/plat/pcie.h @@ -20,8 +20,7 @@ int orion_pcie_x4_mode(void __iomem *base); int orion_pcie_get_local_bus_nr(void __iomem *base); void orion_pcie_set_local_bus_nr(void __iomem *base, int nr); void orion_pcie_reset(void __iomem *base); -void orion_pcie_setup(void __iomem *base, - struct mbus_dram_target_info *dram); +void orion_pcie_setup(void __iomem *base); int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus, u32 devfn, int where, int size, u32 *val); int orion_pcie_rd_conf_tlp(void __iomem *base, struct pci_bus *bus, diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c index af2d733c50b5..86dbb5bdb172 100644 --- a/arch/arm/plat-orion/pcie.c +++ b/arch/arm/plat-orion/pcie.c @@ -13,6 +13,7 @@ #include <linux/mbus.h> #include <asm/mach/pci.h> #include <plat/pcie.h> +#include <plat/addr-map.h> #include <linux/delay.h> /* @@ -175,8 +176,7 @@ static void __init orion_pcie_setup_wins(void __iomem *base, writel(((size - 1) & 0xffff0000) | 1, base + PCIE_BAR_CTRL_OFF(1)); } -void __init orion_pcie_setup(void __iomem *base, - struct mbus_dram_target_info *dram) +void __init orion_pcie_setup(void __iomem *base) { u16 cmd; u32 mask; @@ -184,7 +184,7 @@ void __init orion_pcie_setup(void __iomem *base, /* * Point PCIe unit MBUS decode windows to DRAM space. */ - orion_pcie_setup_wins(base, dram); + orion_pcie_setup_wins(base, &orion_mbus_dram_info); /* * Master + slave enable. diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c index 69a61367e4b8..1ed8d1397fcf 100644 --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c @@ -12,7 +12,6 @@ */ #include <linux/kernel.h> -#include <linux/sched.h> #include <linux/timer.h> #include <linux/clockchips.h> #include <linux/interrupt.h> @@ -60,24 +59,10 @@ static u32 ticks_per_jiffy; * Orion's sched_clock implementation. It has a resolution of * at least 7.5ns (133MHz TCLK). */ -static DEFINE_CLOCK_DATA(cd); -unsigned long long notrace sched_clock(void) +static u32 notrace orion_read_sched_clock(void) { - u32 cyc = ~readl(timer_base + TIMER0_VAL_OFF); - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - - -static void notrace orion_update_sched_clock(void) -{ - u32 cyc = ~readl(timer_base + TIMER0_VAL_OFF); - update_sched_clock(&cd, cyc, (u32)~0); -} - -static void __init setup_sched_clock(unsigned long tclk) -{ - init_sched_clock(&cd, orion_update_sched_clock, 32, tclk); + return ~readl(timer_base + TIMER0_VAL_OFF); } /* @@ -217,7 +202,7 @@ orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask, /* * Set scale and timer for sched_clock. */ - setup_sched_clock(tclk); + setup_sched_clock(orion_read_sched_clock, 32, tclk); /* * Setup free-running clocksource timer (interrupts diff --git a/arch/arm/plat-pxa/include/plat/gpio-pxa.h b/arch/arm/plat-pxa/include/plat/gpio-pxa.h deleted file mode 100644 index b6390beff323..000000000000 --- a/arch/arm/plat-pxa/include/plat/gpio-pxa.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef __PLAT_PXA_GPIO_H -#define __PLAT_PXA_GPIO_H - -struct irq_data; - -/* - * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with - * one set of registers. The register offsets are organized below: - * - * GPLR GPDR GPSR GPCR GRER GFER GEDR - * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 - * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C - * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 - * - * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 - * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C - * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 - * - * NOTE: - * BANK 3 is only available on PXA27x and later processors. - * BANK 4 and 5 are only available on PXA935 - */ - -#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n)) - -#define GPLR_OFFSET 0x00 -#define GPDR_OFFSET 0x0C -#define GPSR_OFFSET 0x18 -#define GPCR_OFFSET 0x24 -#define GRER_OFFSET 0x30 -#define GFER_OFFSET 0x3C -#define GEDR_OFFSET 0x48 - -/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). - * Those cases currently cause holes in the GPIO number space, the - * actual number of the last GPIO is recorded by 'pxa_last_gpio'. - */ -extern int pxa_last_gpio; - -typedef int (*set_wake_t)(struct irq_data *d, unsigned int on); - -extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn); - -#endif /* __PLAT_PXA_GPIO_H */ diff --git a/arch/arm/plat-pxa/include/plat/gpio.h b/arch/arm/plat-pxa/include/plat/gpio.h deleted file mode 100644 index 258f77210b02..000000000000 --- a/arch/arm/plat-pxa/include/plat/gpio.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef __PLAT_GPIO_H -#define __PLAT_GPIO_H - -#define __ARM_GPIOLIB_COMPLEX - -/* The individual machine provides register offsets and NR_BUILTIN_GPIO */ -#include <mach/gpio-pxa.h> - -static inline int gpio_get_value(unsigned gpio) -{ - if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) - return GPLR(gpio) & GPIO_bit(gpio); - else - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) { - if (value) - GPSR(gpio) = GPIO_bit(gpio); - else - GPCR(gpio) = GPIO_bit(gpio); - } else - __gpio_set_value(gpio, value); -} - -#define gpio_cansleep __gpio_cansleep - -#endif /* __PLAT_GPIO_H */ diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index bcc43f346272..084604be6ad1 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -19,7 +19,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/gpio.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c index b3d3d0278997..468079938884 100644 --- a/arch/arm/plat-s3c24xx/cpu-freq.c +++ b/arch/arm/plat-s3c24xx/cpu-freq.c @@ -20,7 +20,7 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/sysfs.h> #include <linux/slab.h> diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 3c6335307fb1..1121df13e15f 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -192,27 +192,6 @@ static unsigned long s3c24xx_read_idcode_v4(void) return __raw_readl(S3C2410_GSTATUS1); } -/* Hook for arm_pm_restart to ensure we execute the reset code - * with the caches enabled. It seems at least the S3C2440 has a problem - * resetting if there is bus activity interrupted by the reset. - */ -static void s3c24xx_pm_restart(char mode, const char *cmd) -{ - if (mode != 's') { - unsigned long flags; - - local_irq_save(flags); - __cpuc_flush_kern_all(); - __cpuc_flush_user_all(); - - arch_reset(mode, cmd); - local_irq_restore(flags); - } - - /* fallback, or unhandled */ - arm_machine_restart(mode, cmd); -} - void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) { /* initialise the io descriptors we need for initialisation */ @@ -226,7 +205,5 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) } s3c24xx_init_cpu(); - arm_pm_restart = s3c24xx_pm_restart; - s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); } diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 53754bcf15a7..9fe35348e03b 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1437,11 +1437,10 @@ int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel) size_t map_sz = sizeof(*nmap) * sel->map_size; int ptr; - nmap = kmalloc(map_sz, GFP_KERNEL); + nmap = kmemdup(sel->map, map_sz, GFP_KERNEL); if (nmap == NULL) return -ENOMEM; - memcpy(nmap, sel->map, map_sz); memcpy(&dma_sel, sel, sizeof(*sel)); dma_sel.map = nmap; diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index fc8c5f89954d..bc42c04091fd 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -22,7 +22,7 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/ioport.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/syscore_ops.h> #include <asm/irq.h> diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c index 663b280d65da..68296b1fe7e5 100644 --- a/arch/arm/plat-s3c24xx/pm-simtec.c +++ b/arch/arm/plat-s3c24xx/pm-simtec.c @@ -18,7 +18,6 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> -#include <linux/sysdev.h> #include <linux/device.h> #include <linux/io.h> diff --git a/arch/arm/plat-s3c24xx/s3c2410-clock.c b/arch/arm/plat-s3c24xx/s3c2410-clock.c index def76aa3825a..25dc4d4397b1 100644 --- a/arch/arm/plat-s3c24xx/s3c2410-clock.c +++ b/arch/arm/plat-s3c24xx/s3c2410-clock.c @@ -26,7 +26,7 @@ #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/clk.h> #include <linux/mutex.h> #include <linux/delay.h> diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c index 0b46d3895d62..48eee39ab369 100644 --- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c +++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c @@ -17,7 +17,7 @@ #include <linux/ioport.h> #include <linux/cpufreq.h> #include <linux/seq_file.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/delay.h> #include <linux/clk.h> #include <linux/err.h> diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c index 5a21b15b2a97..95e68190d593 100644 --- a/arch/arm/plat-s3c24xx/s3c2443-clock.c +++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c @@ -297,13 +297,6 @@ static struct clksrc_clk clk_usb_bus_host = { static struct clksrc_clk clksrc_clks[] = { { - /* ART baud-rate clock sourced from esysclk via a divisor */ - .clk = { - .name = "uartclk", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, - }, { /* camera interface bus-clock, divided down from esysclk */ .clk = { .name = "camif-upll", /* same as 2440 name */ @@ -323,6 +316,15 @@ static struct clksrc_clk clksrc_clks[] = { }, }; +static struct clksrc_clk clk_esys_uart = { + /* ART baud-rate clock sourced from esysclk via a divisor */ + .clk = { + .name = "uartclk", + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, +}; + static struct clk clk_i2s_ext = { .name = "i2s-ext", }; @@ -425,12 +427,6 @@ static struct clk init_clocks[] = { .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA5, }, { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_HSMMC, - }, { .name = "gpio", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, @@ -512,6 +508,14 @@ static struct clk init_clocks[] = { } }; +static struct clk hsmmc1_clk = { + .name = "hsmmc", + .devname = "s3c-sdhci.1", + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_HSMMC, +}; + static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0) { clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; @@ -577,6 +581,7 @@ static struct clk *clks[] __initdata = { &clk_epll, &clk_usb_bus, &clk_armdiv, + &hsmmc1_clk, }; static struct clksrc_clk *clksrcs[] __initdata = { @@ -589,6 +594,13 @@ static struct clksrc_clk *clksrcs[] __initdata = { &clk_arm, }; +static struct clk_lookup s3c2443_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk), +}; + void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, unsigned int *divs, int nr_divs, int divmask) @@ -618,6 +630,7 @@ void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, /* See s3c2443/etc notes on disabling clocks at init time */ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup)); s3c2443_common_setup_clocks(get_mpll); } diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 9b9968fa8695..8167ce66188c 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -11,6 +11,7 @@ config PLAT_S5P default y select ARM_VIC if !ARCH_EXYNOS4 select ARM_GIC if ARCH_EXYNOS4 + select GIC_NON_BANKED if ARCH_EXYNOS4 select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select S3C_GPIO_TRACK diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 876344038b8d..30d8c3016e6b 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -13,7 +13,6 @@ obj- := # Core files obj-y += dev-uart.o -obj-y += cpu.o obj-y += clock.o obj-y += irq.o obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c index 5f84a3f13ef9..963edea7f7e7 100644 --- a/arch/arm/plat-s5p/clock.c +++ b/arch/arm/plat-s5p/clock.c @@ -17,7 +17,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/clk.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/io.h> #include <asm/div64.h> diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c deleted file mode 100644 index a56959e83516..000000000000 --- a/arch/arm/plat-s5p/cpu.c +++ /dev/null @@ -1,144 +0,0 @@ -/* linux/arch/arm/plat-s5p/cpu.c - * - * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P CPU Support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/s5p6440.h> -#include <plat/s5p6450.h> -#include <plat/s5pc100.h> -#include <plat/s5pv210.h> -#include <plat/exynos4.h> - -/* table of supported CPUs */ - -static const char name_s5p6440[] = "S5P6440"; -static const char name_s5p6450[] = "S5P6450"; -static const char name_s5pc100[] = "S5PC100"; -static const char name_s5pv210[] = "S5PV210/S5PC110"; -static const char name_exynos4210[] = "EXYNOS4210"; -static const char name_exynos4212[] = "EXYNOS4212"; -static const char name_exynos4412[] = "EXYNOS4412"; - -static struct cpu_table cpu_ids[] __initdata = { - { - .idcode = S5P6440_CPU_ID, - .idmask = S5P64XX_CPU_MASK, - .map_io = s5p6440_map_io, - .init_clocks = s5p6440_init_clocks, - .init_uarts = s5p6440_init_uarts, - .init = s5p64x0_init, - .name = name_s5p6440, - }, { - .idcode = S5P6450_CPU_ID, - .idmask = S5P64XX_CPU_MASK, - .map_io = s5p6450_map_io, - .init_clocks = s5p6450_init_clocks, - .init_uarts = s5p6450_init_uarts, - .init = s5p64x0_init, - .name = name_s5p6450, - }, { - .idcode = S5PC100_CPU_ID, - .idmask = S5PC100_CPU_MASK, - .map_io = s5pc100_map_io, - .init_clocks = s5pc100_init_clocks, - .init_uarts = s5pc100_init_uarts, - .init = s5pc100_init, - .name = name_s5pc100, - }, { - .idcode = S5PV210_CPU_ID, - .idmask = S5PV210_CPU_MASK, - .map_io = s5pv210_map_io, - .init_clocks = s5pv210_init_clocks, - .init_uarts = s5pv210_init_uarts, - .init = s5pv210_init, - .name = name_s5pv210, - }, { - .idcode = EXYNOS4210_CPU_ID, - .idmask = EXYNOS4_CPU_MASK, - .map_io = exynos4_map_io, - .init_clocks = exynos4_init_clocks, - .init_uarts = exynos4_init_uarts, - .init = exynos_init, - .name = name_exynos4210, - }, { - .idcode = EXYNOS4212_CPU_ID, - .idmask = EXYNOS4_CPU_MASK, - .map_io = exynos4_map_io, - .init_clocks = exynos4_init_clocks, - .init_uarts = exynos4_init_uarts, - .init = exynos_init, - .name = name_exynos4212, - }, { - .idcode = EXYNOS4412_CPU_ID, - .idmask = EXYNOS4_CPU_MASK, - .map_io = exynos4_map_io, - .init_clocks = exynos4_init_clocks, - .init_uarts = exynos4_init_uarts, - .init = exynos_init, - .name = name_exynos4412, - }, -}; - -/* minimal IO mapping */ - -static struct map_desc s5p_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_CHIPID, - .pfn = __phys_to_pfn(S5P_PA_CHIPID), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_SYS, - .pfn = __phys_to_pfn(S5P_PA_SYSCON), - .length = SZ_64K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_TIMER, - .pfn = __phys_to_pfn(S5P_PA_TIMER), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_WATCHDOG, - .pfn = __phys_to_pfn(S3C_PA_WDT), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_SROMC, - .pfn = __phys_to_pfn(S5P_PA_SROMC), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -/* read cpu identification code */ - -void __init s5p_init_io(struct map_desc *mach_desc, - int size, void __iomem *cpuid_addr) -{ - /* initialize the io descriptors we need for initialization */ - iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc)); - if (mach_desc) - iotable_init(mach_desc, size); - - /* detect cpu id and rev. */ - s5p_init_cpu(cpuid_addr); - - s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); -} diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c index b5bb774985b0..c496b359c371 100644 --- a/arch/arm/plat-s5p/irq-eint.c +++ b/arch/arm/plat-s5p/irq-eint.c @@ -14,7 +14,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/gpio.h> #include <asm/hardware/vic.h> diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c index c833e7b57599..17c0a2c58dfd 100644 --- a/arch/arm/plat-s5p/s5p-time.c +++ b/arch/arm/plat-s5p/s5p-time.c @@ -10,7 +10,6 @@ * published by the Free Software Foundation. */ -#include <linux/sched.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/err.h> @@ -321,26 +320,14 @@ static void __iomem *s5p_timer_reg(void) * this wraps around for now, since it is just a relative time * stamp. (Inspired by U300 implementation.) */ -static DEFINE_CLOCK_DATA(cd); - -unsigned long long notrace sched_clock(void) +static u32 notrace s5p_read_sched_clock(void) { void __iomem *reg = s5p_timer_reg(); if (!reg) return 0; - return cyc_to_sched_clock(&cd, ~__raw_readl(reg), (u32)~0); -} - -static void notrace s5p_update_sched_clock(void) -{ - void __iomem *reg = s5p_timer_reg(); - - if (!reg) - return; - - update_sched_clock(&cd, ~__raw_readl(reg), (u32)~0); + return ~__raw_readl(reg); } static void __init s5p_clocksource_init(void) @@ -358,7 +345,7 @@ static void __init s5p_clocksource_init(void) s5p_time_setup(timer_source.source_id, TCNT_MAX); s5p_time_start(timer_source.source_id, PERIODIC); - init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate); + setup_sched_clock(s5p_read_sched_clock, 32, clock_rate); if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer", clock_rate, 250, 32, clocksource_mmio_readl_down)) diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 313eb26cfa62..6a2abe67c8b2 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -88,12 +88,20 @@ config S5P_GPIO_DRVSTR config SAMSUNG_GPIO_EXTRA int "Number of additional GPIO pins" + default 128 if SAMSUNG_GPIO_EXTRA128 + default 64 if SAMSUNG_GPIO_EXTRA64 default 0 help Use additional GPIO space in addition to the GPIO's the SOC provides. This allows expanding the GPIO space for use with GPIO expanders. +config SAMSUNG_GPIO_EXTRA64 + bool + +config SAMSUNG_GPIO_EXTRA128 + bool + config S3C_GPIO_SPACE int "Space between gpio banks" default 0 @@ -226,11 +234,23 @@ config SAMSUNG_DEV_IDE help Compile in platform device definitions for IDE -config S3C64XX_DEV_SPI +config S3C64XX_DEV_SPI0 + bool + help + Compile in platform device definitions for S3C64XX's type + SPI controller 0 + +config S3C64XX_DEV_SPI1 + bool + help + Compile in platform device definitions for S3C64XX's type + SPI controller 1 + +config S3C64XX_DEV_SPI2 bool help Compile in platform device definitions for S3C64XX's type - SPI controllers. + SPI controller 2 config SAMSUNG_DEV_TS bool diff --git a/arch/arm/plat-samsung/clock-clksrc.c b/arch/arm/plat-samsung/clock-clksrc.c index ae8b8507663f..786a4107a157 100644 --- a/arch/arm/plat-samsung/clock-clksrc.c +++ b/arch/arm/plat-samsung/clock-clksrc.c @@ -16,7 +16,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/clk.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/io.h> #include <plat/clock.h> diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 3b4451979d1b..10f71179071f 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -33,7 +33,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/clk.h> diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c index e657305644cc..a976c023b286 100644 --- a/arch/arm/plat-samsung/dev-backlight.c +++ b/arch/arm/plat-samsung/dev-backlight.c @@ -15,7 +15,6 @@ #include <linux/slab.h> #include <linux/io.h> #include <linux/pwm_backlight.h> -#include <linux/slab.h> #include <plat/devs.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 4ca8b571f971..32a6e394db24 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -29,6 +29,7 @@ #include <linux/mtd/partitions.h> #include <linux/mmc/host.h> #include <linux/ioport.h> +#include <linux/platform_data/s3c-hsudc.h> #include <asm/irq.h> #include <asm/pmu.h> @@ -61,6 +62,7 @@ #include <plat/regs-iic.h> #include <plat/regs-serial.h> #include <plat/regs-spi.h> +#include <plat/s3c64xx-spi.h> static u64 samsung_device_dma_mask = DMA_BIT_MASK(32); @@ -1461,3 +1463,129 @@ struct platform_device s3c_device_wdt = { .resource = s3c_wdt_resource, }; #endif /* CONFIG_S3C_DEV_WDT */ + +#ifdef CONFIG_S3C64XX_DEV_SPI0 +static struct resource s3c64xx_spi0_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_SPI0_TX), + [2] = DEFINE_RES_DMA(DMACH_SPI0_RX), + [3] = DEFINE_RES_IRQ(IRQ_SPI0), +}; + +struct platform_device s3c64xx_device_spi0 = { + .name = "s3c64xx-spi", + .id = 0, + .num_resources = ARRAY_SIZE(s3c64xx_spi0_resource), + .resource = s3c64xx_spi0_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void __init s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd, + int src_clk_nr, int num_cs) +{ + if (!pd) { + pr_err("%s:Need to pass platform data\n", __func__); + return; + } + + /* Reject invalid configuration */ + if (!num_cs || src_clk_nr < 0) { + pr_err("%s: Invalid SPI configuration\n", __func__); + return; + } + + pd->num_cs = num_cs; + pd->src_clk_nr = src_clk_nr; + if (!pd->cfg_gpio) + pd->cfg_gpio = s3c64xx_spi0_cfg_gpio; + + s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi0); +} +#endif /* CONFIG_S3C64XX_DEV_SPI0 */ + +#ifdef CONFIG_S3C64XX_DEV_SPI1 +static struct resource s3c64xx_spi1_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_SPI1_TX), + [2] = DEFINE_RES_DMA(DMACH_SPI1_RX), + [3] = DEFINE_RES_IRQ(IRQ_SPI1), +}; + +struct platform_device s3c64xx_device_spi1 = { + .name = "s3c64xx-spi", + .id = 1, + .num_resources = ARRAY_SIZE(s3c64xx_spi1_resource), + .resource = s3c64xx_spi1_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void __init s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd, + int src_clk_nr, int num_cs) +{ + if (!pd) { + pr_err("%s:Need to pass platform data\n", __func__); + return; + } + + /* Reject invalid configuration */ + if (!num_cs || src_clk_nr < 0) { + pr_err("%s: Invalid SPI configuration\n", __func__); + return; + } + + pd->num_cs = num_cs; + pd->src_clk_nr = src_clk_nr; + if (!pd->cfg_gpio) + pd->cfg_gpio = s3c64xx_spi1_cfg_gpio; + + s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi1); +} +#endif /* CONFIG_S3C64XX_DEV_SPI1 */ + +#ifdef CONFIG_S3C64XX_DEV_SPI2 +static struct resource s3c64xx_spi2_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_SPI2_TX), + [2] = DEFINE_RES_DMA(DMACH_SPI2_RX), + [3] = DEFINE_RES_IRQ(IRQ_SPI2), +}; + +struct platform_device s3c64xx_device_spi2 = { + .name = "s3c64xx-spi", + .id = 2, + .num_resources = ARRAY_SIZE(s3c64xx_spi2_resource), + .resource = s3c64xx_spi2_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void __init s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd, + int src_clk_nr, int num_cs) +{ + if (!pd) { + pr_err("%s:Need to pass platform data\n", __func__); + return; + } + + /* Reject invalid configuration */ + if (!num_cs || src_clk_nr < 0) { + pr_err("%s: Invalid SPI configuration\n", __func__); + return; + } + + pd->num_cs = num_cs; + pd->src_clk_nr = src_clk_nr; + if (!pd->cfg_gpio) + pd->cfg_gpio = s3c64xx_spi2_cfg_gpio; + + s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi2); +} +#endif /* CONFIG_S3C64XX_DEV_SPI2 */ diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index 93a994a5dd8f..2cded872f22b 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -18,23 +18,24 @@ #include <mach/dma.h> -static inline bool pl330_filter(struct dma_chan *chan, void *param) -{ - struct dma_pl330_peri *peri = chan->private; - return peri->peri_id == (unsigned)param; -} - static unsigned samsung_dmadev_request(enum dma_ch dma_ch, struct samsung_dma_info *info) { struct dma_chan *chan; dma_cap_mask_t mask; struct dma_slave_config slave_config; + void *filter_param; dma_cap_zero(mask); dma_cap_set(info->cap, mask); - chan = dma_request_channel(mask, pl330_filter, (void *)dma_ch); + /* + * If a dma channel property of a device node from device tree is + * specified, use that as the fliter parameter. + */ + filter_param = (dma_ch == DMACH_DT_PROP) ? (void *)info->dt_dmach_prop : + (void *)dma_ch; + chan = dma_request_channel(mask, pl330_filter, filter_param); if (info->direction == DMA_FROM_DEVICE) { memset(&slave_config, 0, sizeof(struct dma_slave_config)); diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index dac4760c0f0a..95509d8eb140 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -202,14 +202,6 @@ extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void); extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void); -extern void s3c2410_iotiming_debugfs(struct seq_file *seq, - struct s3c_cpufreq_config *cfg, - union s3c_iobank *iob); - -extern void s3c2412_iotiming_debugfs(struct seq_file *seq, - struct s3c_cpufreq_config *cfg, - union s3c_iobank *iob); - #ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS #define s3c_cpufreq_debugfs_call(x) x #else @@ -226,6 +218,10 @@ extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg); extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg); #ifdef CONFIG_S3C2410_IOTIMING +extern void s3c2410_iotiming_debugfs(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); + extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg, struct s3c_iotimings *iot); @@ -235,6 +231,7 @@ extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg, extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, struct s3c_iotimings *iot); #else +#define s3c2410_iotiming_debugfs NULL #define s3c2410_iotiming_calc NULL #define s3c2410_iotiming_get NULL #define s3c2410_iotiming_set NULL @@ -242,8 +239,10 @@ extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, /* S3C2412 compatible routines */ -extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *timings); +#ifdef CONFIG_S3C2412_IOTIMING +extern void s3c2412_iotiming_debugfs(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg, struct s3c_iotimings *timings); @@ -253,6 +252,12 @@ extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg, extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg, struct s3c_iotimings *iot); +#else +#define s3c2412_iotiming_debugfs NULL +#define s3c2412_iotiming_calc NULL +#define s3c2412_iotiming_get NULL +#define s3c2412_iotiming_set NULL +#endif /* CONFIG_S3C2412_IOTIMING */ #ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG #define s3c_freq_dbg(x...) printk(KERN_INFO x) diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 40fd7b6b5e66..73cb3cfd0685 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -152,13 +152,9 @@ extern void s3c_init_cpu(unsigned long idcode, /* core initialisation functions */ extern void s3c24xx_init_irq(void); -extern void s3c64xx_init_irq(u32 vic0, u32 vic1); extern void s5p_init_irq(u32 *vic, u32 num_vic); extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); -extern void s3c64xx_init_io(struct map_desc *mach_desc, int size); -extern void s5p_init_io(struct map_desc *mach_desc, - int size, void __iomem *cpuid_addr); extern void s3c24xx_init_cpu(void); extern void s3c64xx_init_cpu(void); @@ -183,22 +179,20 @@ extern struct syscore_ops s3c2410_pm_syscore_ops; extern struct syscore_ops s3c2412_pm_syscore_ops; extern struct syscore_ops s3c2416_pm_syscore_ops; extern struct syscore_ops s3c244x_pm_syscore_ops; -extern struct syscore_ops s3c64xx_irq_syscore_ops; - -/* system device classes */ - -extern struct sysdev_class s3c2410_sysclass; -extern struct sysdev_class s3c2410a_sysclass; -extern struct sysdev_class s3c2412_sysclass; -extern struct sysdev_class s3c2416_sysclass; -extern struct sysdev_class s3c2440_sysclass; -extern struct sysdev_class s3c2442_sysclass; -extern struct sysdev_class s3c2443_sysclass; -extern struct sysdev_class s3c6410_sysclass; -extern struct sysdev_class s3c64xx_sysclass; -extern struct sysdev_class s5p64x0_sysclass; -extern struct sysdev_class s5pv210_sysclass; -extern struct sysdev_class exynos4_sysclass; + +/* system device subsystems */ + +extern struct bus_type s3c2410_subsys; +extern struct bus_type s3c2410a_subsys; +extern struct bus_type s3c2412_subsys; +extern struct bus_type s3c2416_subsys; +extern struct bus_type s3c2440_subsys; +extern struct bus_type s3c2442_subsys; +extern struct bus_type s3c2443_subsys; +extern struct bus_type s3c6410_subsys; +extern struct bus_type s5p64x0_subsys; +extern struct bus_type s5pv210_subsys; +extern struct bus_type exynos4_subsys; extern void (*s5pc1xx_idle)(void); diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index ab633c9c2aec..4214ea0ff8fe 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -39,6 +39,7 @@ extern struct platform_device s3c64xx_device_pcm0; extern struct platform_device s3c64xx_device_pcm1; extern struct platform_device s3c64xx_device_spi0; extern struct platform_device s3c64xx_device_spi1; +extern struct platform_device s3c64xx_device_spi2; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_cfcon; @@ -98,8 +99,6 @@ extern struct platform_device s5p6450_device_iis1; extern struct platform_device s5p6450_device_iis2; extern struct platform_device s5p6450_device_pcm0; -extern struct platform_device s5p64x0_device_spi0; -extern struct platform_device s5p64x0_device_spi1; extern struct platform_device s5pc100_device_ac97; extern struct platform_device s5pc100_device_iis0; @@ -108,9 +107,6 @@ extern struct platform_device s5pc100_device_iis2; extern struct platform_device s5pc100_device_pcm0; extern struct platform_device s5pc100_device_pcm1; extern struct platform_device s5pc100_device_spdif; -extern struct platform_device s5pc100_device_spi0; -extern struct platform_device s5pc100_device_spi1; -extern struct platform_device s5pc100_device_spi2; extern struct platform_device s5pv210_device_ac97; extern struct platform_device s5pv210_device_iis0; @@ -120,8 +116,6 @@ extern struct platform_device s5pv210_device_pcm0; extern struct platform_device s5pv210_device_pcm1; extern struct platform_device s5pv210_device_pcm2; extern struct platform_device s5pv210_device_spdif; -extern struct platform_device s5pv210_device_spi0; -extern struct platform_device s5pv210_device_spi1; extern struct platform_device exynos4_device_ac97; extern struct platform_device exynos4_device_ahci; @@ -129,6 +123,7 @@ extern struct platform_device exynos4_device_dwmci; extern struct platform_device exynos4_device_i2s0; extern struct platform_device exynos4_device_i2s1; extern struct platform_device exynos4_device_i2s2; +extern struct platform_device exynos4_device_ohci; extern struct platform_device exynos4_device_pcm0; extern struct platform_device exynos4_device_pcm1; extern struct platform_device exynos4_device_pcm2; diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h index 4c1a363526cf..22eafc310bd7 100644 --- a/arch/arm/plat-samsung/include/plat/dma-ops.h +++ b/arch/arm/plat-samsung/include/plat/dma-ops.h @@ -31,6 +31,7 @@ struct samsung_dma_info { enum dma_slave_buswidth width; dma_addr_t fifo; struct s3c2410_dma_client *client; + struct property *dt_dmach_prop; }; struct samsung_dma_ops { diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h index 2e55e5958674..c5eaad529de5 100644 --- a/arch/arm/plat-samsung/include/plat/dma-pl330.h +++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h @@ -21,7 +21,8 @@ * use these just as IDs. */ enum dma_ch { - DMACH_UART0_RX, + DMACH_DT_PROP = -1, + DMACH_UART0_RX = 0, DMACH_UART0_TX, DMACH_UART1_RX, DMACH_UART1_TX, diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h index 1c1ed5481253..d01576318b2c 100644 --- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h +++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h @@ -12,7 +12,7 @@ #include <plat/dma-core.h> -extern struct sysdev_class dma_sysclass; +extern struct bus_type dma_subsys; extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS]; #define DMA_CH_VALID (1<<31) diff --git a/arch/arm/plat-samsung/include/plat/exynos4.h b/arch/arm/plat-samsung/include/plat/exynos4.h deleted file mode 100644 index f546e88ebc94..000000000000 --- a/arch/arm/plat-samsung/include/plat/exynos4.h +++ /dev/null @@ -1,35 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/exynos4.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Header file for exynos4 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for EXYNOS4 related SoCs */ - -extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void exynos4_register_clocks(void); -extern void exynos4210_register_clocks(void); -extern void exynos4212_register_clocks(void); -extern void exynos4_setup_clocks(void); - -#ifdef CONFIG_ARCH_EXYNOS -extern int exynos_init(void); -extern void exynos4_init_irq(void); -extern void exynos4_map_io(void); -extern void exynos4_init_clocks(int xtal); -extern struct sys_timer exynos4_timer; - -#define exynos4_init_uarts exynos4_common_init_uarts - -#else -#define exynos4_init_clocks NULL -#define exynos4_init_uarts NULL -#define exynos4_map_io NULL -#define exynos_init NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h index 08d1a7ef97b7..df46b776976a 100644 --- a/arch/arm/plat-samsung/include/plat/irqs.h +++ b/arch/arm/plat-samsung/include/plat/irqs.h @@ -44,13 +44,14 @@ #define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x)) #define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x)) -#define S5P_TIMER_IRQ(x) (11 + (x)) +#define S5P_TIMER_IRQ(x) (IRQ_TIMER_BASE + (x)) #define IRQ_TIMER0 S5P_TIMER_IRQ(0) #define IRQ_TIMER1 S5P_TIMER_IRQ(1) #define IRQ_TIMER2 S5P_TIMER_IRQ(2) #define IRQ_TIMER3 S5P_TIMER_IRQ(3) #define IRQ_TIMER4 S5P_TIMER_IRQ(4) +#define IRQ_TIMER_COUNT (5) #define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \ : ((x) - 16 + S5P_EINT_BASE2)) diff --git a/arch/arm/plat-samsung/include/plat/keypad.h b/arch/arm/plat-samsung/include/plat/keypad.h index b59a6483cd8a..c81ace332a1e 100644 --- a/arch/arm/plat-samsung/include/plat/keypad.h +++ b/arch/arm/plat-samsung/include/plat/keypad.h @@ -13,32 +13,7 @@ #ifndef __PLAT_SAMSUNG_KEYPAD_H #define __PLAT_SAMSUNG_KEYPAD_H -#include <linux/input/matrix_keypad.h> - -#define SAMSUNG_MAX_ROWS 8 -#define SAMSUNG_MAX_COLS 8 - -/** - * struct samsung_keypad_platdata - Platform device data for Samsung Keypad. - * @keymap_data: pointer to &matrix_keymap_data. - * @rows: number of keypad row supported. - * @cols: number of keypad col supported. - * @no_autorepeat: disable key autorepeat. - * @wakeup: controls whether the device should be set up as wakeup source. - * @cfg_gpio: configure the GPIO. - * - * Initialisation data specific to either the machine or the platform - * for the device driver to use or call-back when configuring gpio. - */ -struct samsung_keypad_platdata { - const struct matrix_keymap_data *keymap_data; - unsigned int rows; - unsigned int cols; - bool no_autorepeat; - bool wakeup; - - void (*cfg_gpio)(unsigned int rows, unsigned int cols); -}; +#include <linux/input/samsung-keypad.h> /** * samsung_keypad_set_platdata - Set platform data for Samsung Keypad device. diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index dcf68709f9cf..61fc53740fbd 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -17,11 +17,12 @@ #include <linux/irq.h> -struct sys_device; +struct device; #ifdef CONFIG_PM extern __init int s3c_pm_init(void); +extern __init int s3c64xx_pm_init(void); #else @@ -29,6 +30,11 @@ static inline int s3c_pm_init(void) { return 0; } + +static inline int s3c64xx_pm_init(void) +{ + return 0; +} #endif /* configuration for the IRQ mask over sleep */ diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index 720734847027..29c26a818842 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -71,6 +71,7 @@ #define S3C2410_LCON_IRM (1<<6) #define S3C2440_UCON_CLKMASK (3<<10) +#define S3C2440_UCON_CLKSHIFT (10) #define S3C2440_UCON_PCLK (0<<10) #define S3C2440_UCON_UCLK (1<<10) #define S3C2440_UCON_PCLK2 (2<<10) @@ -78,6 +79,7 @@ #define S3C2443_UCON_EPLL (3<<10) #define S3C6400_UCON_CLKMASK (3<<10) +#define S3C6400_UCON_CLKSHIFT (10) #define S3C6400_UCON_PCLK (0<<10) #define S3C6400_UCON_PCLK2 (2<<10) #define S3C6400_UCON_UCLK0 (1<<10) @@ -90,11 +92,14 @@ #define S3C2440_UCON_DIVSHIFT (12) #define S3C2412_UCON_CLKMASK (3<<10) +#define S3C2412_UCON_CLKSHIFT (10) #define S3C2412_UCON_UCLK (1<<10) #define S3C2412_UCON_USYSCLK (3<<10) #define S3C2412_UCON_PCLK (0<<10) #define S3C2412_UCON_PCLK2 (2<<10) +#define S3C2410_UCON_CLKMASK (1 << 10) +#define S3C2410_UCON_CLKSHIFT (10) #define S3C2410_UCON_UCLK (1<<10) #define S3C2410_UCON_SBREAK (1<<4) @@ -193,6 +198,7 @@ /* Following are specific to S5PV210 */ #define S5PV210_UCON_CLKMASK (1<<10) +#define S5PV210_UCON_CLKSHIFT (10) #define S5PV210_UCON_PCLK (0<<10) #define S5PV210_UCON_UCLK (1<<10) @@ -221,29 +227,24 @@ #define S5PV210_UFSTAT_RXMASK (255<<0) #define S5PV210_UFSTAT_RXSHIFT (0) -#define NO_NEED_CHECK_CLKSRC 1 +#define S3C2410_UCON_CLKSEL0 (1 << 0) +#define S3C2410_UCON_CLKSEL1 (1 << 1) +#define S3C2410_UCON_CLKSEL2 (1 << 2) +#define S3C2410_UCON_CLKSEL3 (1 << 3) -#ifndef __ASSEMBLY__ +/* Default values for s5pv210 UCON and UFCON uart registers */ +#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) -/* struct s3c24xx_uart_clksrc - * - * this structure defines a named clock source that can be used for the - * uart, so that the best clock can be selected for the requested baud - * rate. - * - * min_baud and max_baud define the range of baud-rates this clock is - * acceptable for, if they are both zero, it is assumed any baud rate that - * can be generated from this clock will be used. - * - * divisor gives the divisor from the clock to the one seen by the uart -*/ +#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) -struct s3c24xx_uart_clksrc { - const char *name; - unsigned int divisor; - unsigned int min_baud; - unsigned int max_baud; -}; +#ifndef __ASSEMBLY__ /* configuration structure for per-machine configurations for the * serial port @@ -257,15 +258,13 @@ struct s3c2410_uartcfg { unsigned char unused; unsigned short flags; upf_t uart_flags; /* default uart flags */ + unsigned int clk_sel; unsigned int has_fracval; unsigned long ucon; /* value of ucon for port */ unsigned long ulcon; /* value of ulcon for port */ unsigned long ufcon; /* value of ufcon for port */ - - struct s3c24xx_uart_clksrc *clocks; - unsigned int clocks_size; }; /* s3c24xx_uart_devs diff --git a/arch/arm/plat-samsung/include/plat/reset.h b/arch/arm/plat-samsung/include/plat/reset.h deleted file mode 100644 index 32ca5179c6e1..000000000000 --- a/arch/arm/plat-samsung/include/plat/reset.h +++ /dev/null @@ -1,16 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/reset.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_SAMSUNG_RESET_H -#define __PLAT_SAMSUNG_RESET_H __FILE__ - -extern void (*s5p_reset_hook)(void); - -#endif /* __PLAT_SAMSUNG_RESET_H */ diff --git a/arch/arm/plat-samsung/include/plat/s3c2412.h b/arch/arm/plat-samsung/include/plat/s3c2412.h index 5bcfd143ba16..cbae50ddacc8 100644 --- a/arch/arm/plat-samsung/include/plat/s3c2412.h +++ b/arch/arm/plat-samsung/include/plat/s3c2412.h @@ -21,9 +21,12 @@ extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c2412_init_clocks(int xtal); extern int s3c2412_baseclk_add(void); + +extern void s3c2412_restart(char mode, const char *cmd); #else #define s3c2412_init_clocks NULL #define s3c2412_init_uarts NULL #define s3c2412_map_io NULL #define s3c2412_init NULL +#define s3c2412_restart NULL #endif diff --git a/arch/arm/plat-samsung/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h index a764f8503f52..de2b5bdc5ebd 100644 --- a/arch/arm/plat-samsung/include/plat/s3c2416.h +++ b/arch/arm/plat-samsung/include/plat/s3c2416.h @@ -23,9 +23,11 @@ extern void s3c2416_init_clocks(int xtal); extern int s3c2416_baseclk_add(void); +extern void s3c2416_restart(char mode, const char *cmd); #else #define s3c2416_init_clocks NULL #define s3c2416_init_uarts NULL #define s3c2416_map_io NULL #define s3c2416_init NULL +#define s3c2416_restart NULL #endif diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h index 7fae1a050694..dce05b43d51c 100644 --- a/arch/arm/plat-samsung/include/plat/s3c2443.h +++ b/arch/arm/plat-samsung/include/plat/s3c2443.h @@ -24,11 +24,13 @@ extern void s3c2443_init_clocks(int xtal); extern int s3c2443_baseclk_add(void); +extern void s3c2443_restart(char mode, const char *cmd); #else #define s3c2443_init_clocks NULL #define s3c2443_init_uarts NULL #define s3c2443_map_io NULL #define s3c2443_init NULL +#define s3c2443_restart NULL #endif /* common code used by s3c2443 and others. diff --git a/arch/arm/plat-samsung/include/plat/s3c6400.h b/arch/arm/plat-samsung/include/plat/s3c6400.h deleted file mode 100644 index 37d428aaaebb..000000000000 --- a/arch/arm/plat-samsung/include/plat/s3c6400.h +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c6400.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Header file for s3c6400 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S3C6400 related SoCs */ - -extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s3c6400_setup_clocks(void); - -extern void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit); - -#ifdef CONFIG_CPU_S3C6400 - -extern int s3c6400_init(void); -extern void s3c6400_init_irq(void); -extern void s3c6400_map_io(void); -extern void s3c6400_init_clocks(int xtal); - -#define s3c6400_init_uarts s3c6400_common_init_uarts - -#else -#define s3c6400_init_clocks NULL -#define s3c6400_init_uarts NULL -#define s3c6400_map_io NULL -#define s3c6400_init NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/s3c6410.h b/arch/arm/plat-samsung/include/plat/s3c6410.h deleted file mode 100644 index 20a6675b9d17..000000000000 --- a/arch/arm/plat-samsung/include/plat/s3c6410.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c6410.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Header file for s3c6410 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C6410 - -extern int s3c6410_init(void); -extern void s3c6410_init_irq(void); -extern void s3c6410_map_io(void); -extern void s3c6410_init_clocks(int xtal); - -#define s3c6410_init_uarts s3c6400_common_init_uarts - -#else -#define s3c6410_init_clocks NULL -#define s3c6410_init_uarts NULL -#define s3c6410_map_io NULL -#define s3c6410_init NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index 4c16fa3621bb..aea68b60ef98 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -31,7 +31,6 @@ struct s3c64xx_spi_csinfo { /** * struct s3c64xx_spi_info - SPI Controller defining structure * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field. - * @src_clk_name: Platform name of the corresponding clock. * @clk_from_cmu: If the SPI clock/prescalar control block is present * by the platform's clock-management-unit and not in SPI controller. * @num_cs: Number of CS this controller emulates. @@ -43,7 +42,6 @@ struct s3c64xx_spi_csinfo { */ struct s3c64xx_spi_info { int src_clk_nr; - char *src_clk_name; bool clk_from_cmu; int num_cs; @@ -58,18 +56,28 @@ struct s3c64xx_spi_info { }; /** - * s3c64xx_spi_set_info - SPI Controller configure callback by the board + * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board * initialization code. - * @cntrlr: SPI controller number the configuration is for. + * @pd: SPI platform data to set. * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks. * @num_cs: Number of elements in the 'cs' array. * * Call this from machine init code for each SPI Controller that * has some chips attached to it. */ -extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); -extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); -extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); -extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); +extern void s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd, + int src_clk_nr, int num_cs); +extern void s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd, + int src_clk_nr, int num_cs); +extern void s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd, + int src_clk_nr, int num_cs); +/* defined by architecture to configure gpio */ +extern int s3c64xx_spi0_cfg_gpio(struct platform_device *dev); +extern int s3c64xx_spi1_cfg_gpio(struct platform_device *dev); +extern int s3c64xx_spi2_cfg_gpio(struct platform_device *dev); + +extern struct s3c64xx_spi_info s3c64xx_spi0_pdata; +extern struct s3c64xx_spi_info s3c64xx_spi1_pdata; +extern struct s3c64xx_spi_info s3c64xx_spi2_pdata; #endif /* __S3C64XX_PLAT_SPI_H */ diff --git a/arch/arm/plat-samsung/include/plat/s5p6440.h b/arch/arm/plat-samsung/include/plat/s5p6440.h deleted file mode 100644 index bf85ebbb4fbc..000000000000 --- a/arch/arm/plat-samsung/include/plat/s5p6440.h +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s5p6440.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5p6440 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - /* Common init code for S5P6440 related SoCs */ - -extern void s5p6440_register_clocks(void); -extern void s5p6440_setup_clocks(void); - -#ifdef CONFIG_CPU_S5P6440 - -extern int s5p64x0_init(void); -extern void s5p6440_init_irq(void); -extern void s5p6440_map_io(void); -extern void s5p6440_init_clocks(int xtal); - -extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -#else -#define s5p6440_init_clocks NULL -#define s5p6440_init_uarts NULL -#define s5p6440_map_io NULL -#define s5p64x0_init NULL -#endif - -/* S5P6440 timer */ - -extern struct sys_timer s5p6440_timer; diff --git a/arch/arm/plat-samsung/include/plat/s5p6450.h b/arch/arm/plat-samsung/include/plat/s5p6450.h deleted file mode 100644 index da25f9a1c54a..000000000000 --- a/arch/arm/plat-samsung/include/plat/s5p6450.h +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s5p6450.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Header file for s5p6450 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5P6450 related SoCs */ - -extern void s5p6450_register_clocks(void); -extern void s5p6450_setup_clocks(void); - -#ifdef CONFIG_CPU_S5P6450 - -extern int s5p64x0_init(void); -extern void s5p6450_init_irq(void); -extern void s5p6450_map_io(void); -extern void s5p6450_init_clocks(int xtal); - -extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -#else -#define s5p6450_init_clocks NULL -#define s5p6450_init_uarts NULL -#define s5p6450_map_io NULL -#define s5p64x0_init NULL -#endif - -/* S5P6450 timer */ - -extern struct sys_timer s5p6450_timer; diff --git a/arch/arm/plat-samsung/include/plat/s5pc100.h b/arch/arm/plat-samsung/include/plat/s5pc100.h deleted file mode 100644 index 9a21aeaaf452..000000000000 --- a/arch/arm/plat-samsung/include/plat/s5pc100.h +++ /dev/null @@ -1,33 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s5pc100.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5pc100 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5PC100 related SoCs */ - -extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s5pc100_register_clocks(void); -extern void s5pc100_setup_clocks(void); - -#ifdef CONFIG_CPU_S5PC100 - -extern int s5pc100_init(void); -extern void s5pc100_init_irq(void); -extern void s5pc100_map_io(void); -extern void s5pc100_init_clocks(int xtal); - -#define s5pc100_init_uarts s5pc100_common_init_uarts - -#else -#define s5pc100_init_clocks NULL -#define s5pc100_init_uarts NULL -#define s5pc100_map_io NULL -#define s5pc100_init NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/s5pv210.h b/arch/arm/plat-samsung/include/plat/s5pv210.h deleted file mode 100644 index b4bc6be77072..000000000000 --- a/arch/arm/plat-samsung/include/plat/s5pv210.h +++ /dev/null @@ -1,33 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s5pv210.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5pv210 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5PV210 related SoCs */ - -extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s5pv210_register_clocks(void); -extern void s5pv210_setup_clocks(void); - -#ifdef CONFIG_CPU_S5PV210 - -extern int s5pv210_init(void); -extern void s5pv210_init_irq(void); -extern void s5pv210_map_io(void); -extern void s5pv210_init_clocks(int xtal); - -#define s5pv210_init_uarts s5pv210_common_init_uarts - -#else -#define s5pv210_init_clocks NULL -#define s5pv210_init_uarts NULL -#define s5pv210_map_io NULL -#define s5pv210_init NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index e7b3c752e919..656dc00d30ed 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -66,8 +66,6 @@ struct s3c_sdhci_platdata { enum cd_types cd_type; enum clk_types clk_type; - char **clocks; /* set of clock sources */ - int ext_cd_gpio; bool ext_cd_gpio_invert; int (*ext_cd_init)(void (*notify_func)(struct platform_device *, @@ -125,16 +123,17 @@ extern void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *, int w); extern void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *, int w); extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w); +extern void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *, int w); +extern void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *, int w); +extern void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *, int w); +extern void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *, int w); /* S3C2416 SDHCI setup */ #ifdef CONFIG_S3C2416_SETUP_SDHCI -extern char *s3c2416_hsmmc_clksrcs[4]; - static inline void s3c2416_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC - s3c_hsmmc0_def_platdata.clocks = s3c2416_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio; #endif /* CONFIG_S3C_DEV_HSMMC */ } @@ -142,7 +141,6 @@ static inline void s3c2416_default_sdhci0(void) static inline void s3c2416_default_sdhci1(void) { #ifdef CONFIG_S3C_DEV_HSMMC1 - s3c_hsmmc1_def_platdata.clocks = s3c2416_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio; #endif /* CONFIG_S3C_DEV_HSMMC1 */ } @@ -152,15 +150,13 @@ static inline void s3c2416_default_sdhci0(void) { } static inline void s3c2416_default_sdhci1(void) { } #endif /* CONFIG_S3C2416_SETUP_SDHCI */ + /* S3C64XX SDHCI setup */ #ifdef CONFIG_S3C64XX_SETUP_SDHCI -extern char *s3c64xx_hsmmc_clksrcs[4]; - static inline void s3c6400_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC - s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio; #endif } @@ -168,7 +164,6 @@ static inline void s3c6400_default_sdhci0(void) static inline void s3c6400_default_sdhci1(void) { #ifdef CONFIG_S3C_DEV_HSMMC1 - s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio; #endif } @@ -176,7 +171,6 @@ static inline void s3c6400_default_sdhci1(void) static inline void s3c6400_default_sdhci2(void) { #ifdef CONFIG_S3C_DEV_HSMMC2 - s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio; #endif } @@ -184,7 +178,6 @@ static inline void s3c6400_default_sdhci2(void) static inline void s3c6410_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC - s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio; #endif } @@ -192,7 +185,6 @@ static inline void s3c6410_default_sdhci0(void) static inline void s3c6410_default_sdhci1(void) { #ifdef CONFIG_S3C_DEV_HSMMC1 - s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio; #endif } @@ -200,7 +192,6 @@ static inline void s3c6410_default_sdhci1(void) static inline void s3c6410_default_sdhci2(void) { #ifdef CONFIG_S3C_DEV_HSMMC2 - s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio; #endif } @@ -215,15 +206,51 @@ static inline void s3c6400_default_sdhci2(void) { } #endif /* CONFIG_S3C64XX_SETUP_SDHCI */ +/* S5P64X0 SDHCI setup */ + +#ifdef CONFIG_S5P64X0_SETUP_SDHCI +static inline void s5p64x0_default_sdhci0(void) +{ +#ifdef CONFIG_S3C_DEV_HSMMC + s3c_hsmmc0_def_platdata.cfg_gpio = s5p64x0_setup_sdhci0_cfg_gpio; +#endif +} + +static inline void s5p64x0_default_sdhci1(void) +{ +#ifdef CONFIG_S3C_DEV_HSMMC1 + s3c_hsmmc1_def_platdata.cfg_gpio = s5p64x0_setup_sdhci1_cfg_gpio; +#endif +} + +static inline void s5p6440_default_sdhci2(void) +{ +#ifdef CONFIG_S3C_DEV_HSMMC2 + s3c_hsmmc2_def_platdata.cfg_gpio = s5p6440_setup_sdhci2_cfg_gpio; +#endif +} + +static inline void s5p6450_default_sdhci2(void) +{ +#ifdef CONFIG_S3C_DEV_HSMMC2 + s3c_hsmmc2_def_platdata.cfg_gpio = s5p6450_setup_sdhci2_cfg_gpio; +#endif +} + +#else +static inline void s5p64x0_default_sdhci0(void) { } +static inline void s5p64x0_default_sdhci1(void) { } +static inline void s5p6440_default_sdhci2(void) { } +static inline void s5p6450_default_sdhci2(void) { } + +#endif /* CONFIG_S5P64X0_SETUP_SDHCI */ + /* S5PC100 SDHCI setup */ #ifdef CONFIG_S5PC100_SETUP_SDHCI -extern char *s5pc100_hsmmc_clksrcs[4]; - static inline void s5pc100_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC - s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio; #endif } @@ -231,7 +258,6 @@ static inline void s5pc100_default_sdhci0(void) static inline void s5pc100_default_sdhci1(void) { #ifdef CONFIG_S3C_DEV_HSMMC1 - s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio; #endif } @@ -239,7 +265,6 @@ static inline void s5pc100_default_sdhci1(void) static inline void s5pc100_default_sdhci2(void) { #ifdef CONFIG_S3C_DEV_HSMMC2 - s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio; #endif } @@ -254,12 +279,9 @@ static inline void s5pc100_default_sdhci2(void) { } /* S5PV210 SDHCI setup */ #ifdef CONFIG_S5PV210_SETUP_SDHCI -extern char *s5pv210_hsmmc_clksrcs[4]; - static inline void s5pv210_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC - s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio; #endif } @@ -267,7 +289,6 @@ static inline void s5pv210_default_sdhci0(void) static inline void s5pv210_default_sdhci1(void) { #ifdef CONFIG_S3C_DEV_HSMMC1 - s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio; #endif } @@ -275,7 +296,6 @@ static inline void s5pv210_default_sdhci1(void) static inline void s5pv210_default_sdhci2(void) { #ifdef CONFIG_S3C_DEV_HSMMC2 - s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio; #endif } @@ -283,7 +303,6 @@ static inline void s5pv210_default_sdhci2(void) static inline void s5pv210_default_sdhci3(void) { #ifdef CONFIG_S3C_DEV_HSMMC3 - s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio; #endif } @@ -298,12 +317,9 @@ static inline void s5pv210_default_sdhci3(void) { } /* EXYNOS4 SDHCI setup */ #ifdef CONFIG_EXYNOS4_SETUP_SDHCI -extern char *exynos4_hsmmc_clksrcs[4]; - static inline void exynos4_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC - s3c_hsmmc0_def_platdata.clocks = exynos4_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio; #endif } @@ -311,7 +327,6 @@ static inline void exynos4_default_sdhci0(void) static inline void exynos4_default_sdhci1(void) { #ifdef CONFIG_S3C_DEV_HSMMC1 - s3c_hsmmc1_def_platdata.clocks = exynos4_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio; #endif } @@ -319,7 +334,6 @@ static inline void exynos4_default_sdhci1(void) static inline void exynos4_default_sdhci2(void) { #ifdef CONFIG_S3C_DEV_HSMMC2 - s3c_hsmmc2_def_platdata.clocks = exynos4_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio; #endif } @@ -327,7 +341,6 @@ static inline void exynos4_default_sdhci2(void) static inline void exynos4_default_sdhci3(void) { #ifdef CONFIG_S3C_DEV_HSMMC3 - s3c_hsmmc3_def_platdata.clocks = exynos4_hsmmc_clksrcs; s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio; #endif } diff --git a/arch/arm/plat-samsung/include/plat/system-reset.h b/arch/arm/plat-samsung/include/plat/system-reset.h deleted file mode 100644 index a448e990964d..000000000000 --- a/arch/arm/plat-samsung/include/plat/system-reset.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/system-reset.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Based on arch/arm/mach-s3c2410/include/mach/system-reset.h - * - * S5P - System define for arch_reset() - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <plat/watchdog-reset.h> - -void (*s5p_reset_hook)(void); - -static void arch_reset(char mode, const char *cmd) -{ - /* SWRESET support in s5p_reset_hook() */ - - if (s5p_reset_hook) - s5p_reset_hook(); - - /* Perform reset using Watchdog reset - * if there is no s5p_reset_hook() - */ - - arch_wdt_reset(); -} diff --git a/arch/arm/plat-samsung/include/plat/udc.h b/arch/arm/plat-samsung/include/plat/udc.h index 8c22d586befb..de8e2288a509 100644 --- a/arch/arm/plat-samsung/include/plat/udc.h +++ b/arch/arm/plat-samsung/include/plat/udc.h @@ -37,20 +37,7 @@ struct s3c2410_udc_mach_info { extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *); -/** - * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller. - * @epnum: Number of endpoints to be instantiated by the controller driver. - * @gpio_init: Platform specific USB related GPIO initialization. - * @gpio_uninit: Platform specific USB releted GPIO uninitialzation. - * - * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget - * controllers. - */ -struct s3c24xx_hsudc_platdata { - unsigned int epnum; - void (*gpio_init)(void); - void (*gpio_uninit)(void); -}; +struct s3c24xx_hsudc_platdata; extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd); diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h index 40dbb2b0ae22..f19aff19205c 100644 --- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h +++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h @@ -17,6 +17,7 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/delay.h> static inline void arch_wdt_reset(void) { diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index 4be016eaa6db..c2ff92c30bdf 100644 --- a/arch/arm/plat-samsung/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -14,7 +14,7 @@ */ #include <linux/kernel.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/init.h> #include <linux/io.h> #include <linux/gpio.h> diff --git a/arch/arm/plat-samsung/wakeup-mask.c b/arch/arm/plat-samsung/wakeup-mask.c index dc814037297b..20c3d9117cc2 100644 --- a/arch/arm/plat-samsung/wakeup-mask.c +++ b/arch/arm/plat-samsung/wakeup-mask.c @@ -11,7 +11,7 @@ #include <linux/kernel.h> #include <linux/spinlock.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/types.h> #include <linux/irq.h> #include <linux/io.h> diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile index b4f340b8f1f1..e0f2e5b9530c 100644 --- a/arch/arm/plat-spear/Makefile +++ b/arch/arm/plat-spear/Makefile @@ -3,6 +3,6 @@ # # Common support -obj-y := clock.o time.o +obj-y := clock.o restart.o time.o obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h index a235fa0ca777..86c6f83b44cc 100644 --- a/arch/arm/plat-spear/include/plat/system.h +++ b/arch/arm/plat-spear/include/plat/system.h @@ -14,10 +14,6 @@ #ifndef __PLAT_SYSTEM_H #define __PLAT_SYSTEM_H -#include <linux/io.h> -#include <asm/hardware/sp810.h> -#include <mach/hardware.h> - static inline void arch_idle(void) { /* @@ -27,15 +23,4 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode, const char *cmd) -{ - if (mode == 's') { - /* software reset, Jump into ROM at address 0 */ - cpu_reset(0); - } else { - /* hardware reset, Use on-chip reset capability */ - sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE); - } -} - #endif /* __PLAT_SYSTEM_H */ diff --git a/arch/arm/plat-spear/include/plat/vmalloc.h b/arch/arm/plat-spear/include/plat/vmalloc.h deleted file mode 100644 index 8c8b24d07046..000000000000 --- a/arch/arm/plat-spear/include/plat/vmalloc.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/vmalloc.h - * - * Defining Vmalloc area for SPEAr platform - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_VMALLOC_H -#define __PLAT_VMALLOC_H - -#define VMALLOC_END 0xF0000000UL - -#endif /* __PLAT_VMALLOC_H */ diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c new file mode 100644 index 000000000000..2b4e3d82957c --- /dev/null +++ b/arch/arm/plat-spear/restart.c @@ -0,0 +1,27 @@ +/* + * arch/arm/plat-spear/restart.c + * + * SPEAr platform specific restart functions + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/io.h> +#include <asm/hardware/sp810.h> +#include <mach/hardware.h> +#include <mach/generic.h> + +void spear_restart(char mode, const char *cmd) +{ + if (mode == 's') { + /* software reset, Jump into ROM at address 0 */ + soft_restart(0); + } else { + /* hardware reset, Use on-chip reset capability */ + sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE); + } +} diff --git a/arch/arm/plat-tcc/Kconfig b/arch/arm/plat-tcc/Kconfig deleted file mode 100644 index 1bf499570f42..000000000000 --- a/arch/arm/plat-tcc/Kconfig +++ /dev/null @@ -1,20 +0,0 @@ -if ARCH_TCC_926 - -menu "Telechips ARM926-based CPUs" - -choice - prompt "Telechips CPU type:" - default ARCH_TCC8K - -config ARCH_TCC8K - bool TCC8000 - select USB_ARCH_HAS_OHCI - help - Support for Telechips TCC8000 systems - -endchoice - -source "arch/arm/mach-tcc8k/Kconfig" - -endmenu -endif diff --git a/arch/arm/plat-tcc/Makefile b/arch/arm/plat-tcc/Makefile deleted file mode 100644 index eceabc869b8f..000000000000 --- a/arch/arm/plat-tcc/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -# "Telechips Platform Common Modules" - -obj-y := clock.o system.o diff --git a/arch/arm/plat-tcc/clock.c b/arch/arm/plat-tcc/clock.c deleted file mode 100644 index f3ced10d5271..000000000000 --- a/arch/arm/plat-tcc/clock.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Clock framework for Telechips SoCs - * Based on arch/arm/plat-mxc/clock.c - * - * Copyright (C) 2004 - 2005 Nokia corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com> - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * Copyright 2010 Hans J. Koch, hjk@linutronix.de - * - * Licensed under the terms of the GPL v2. - */ - -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/string.h> - -#include <mach/clock.h> -#include <mach/hardware.h> - -static DEFINE_MUTEX(clocks_mutex); - -/*------------------------------------------------------------------------- - * Standard clock functions defined in include/linux/clk.h - *-------------------------------------------------------------------------*/ - -static void __clk_disable(struct clk *clk) -{ - BUG_ON(clk->refcount == 0); - - if (!(--clk->refcount) && clk->disable) { - /* Unconditionally disable the clock in hardware */ - clk->disable(clk); - /* recursively disable parents */ - if (clk->parent) - __clk_disable(clk->parent); - } -} - -static int __clk_enable(struct clk *clk) -{ - int ret = 0; - - if (clk->refcount++ == 0 && clk->enable) { - if (clk->parent) - ret = __clk_enable(clk->parent); - if (ret) - return ret; - else - return clk->enable(clk); - } - - return 0; -} - -/* This function increments the reference count on the clock and enables the - * clock if not already enabled. The parent clock tree is recursively enabled - */ -int clk_enable(struct clk *clk) -{ - int ret = 0; - - if (!clk) - return -EINVAL; - - mutex_lock(&clocks_mutex); - ret = __clk_enable(clk); - mutex_unlock(&clocks_mutex); - - return ret; -} -EXPORT_SYMBOL_GPL(clk_enable); - -/* This function decrements the reference count on the clock and disables - * the clock when reference count is 0. The parent clock tree is - * recursively disabled - */ -void clk_disable(struct clk *clk) -{ - if (!clk) - return; - - mutex_lock(&clocks_mutex); - __clk_disable(clk); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL_GPL(clk_disable); - -/* Retrieve the *current* clock rate. If the clock itself - * does not provide a special calculation routine, ask - * its parent and so on, until one is able to return - * a valid clock rate - */ -unsigned long clk_get_rate(struct clk *clk) -{ - if (!clk) - return 0UL; - - if (clk->get_rate) - return clk->get_rate(clk); - - return clk_get_rate(clk->parent); -} -EXPORT_SYMBOL_GPL(clk_get_rate); - -/* Round the requested clock rate to the nearest supported - * rate that is less than or equal to the requested rate. - * This is dependent on the clock's current parent. - */ -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (!clk) - return 0; - if (!clk->round_rate) - return 0; - - return clk->round_rate(clk, rate); -} -EXPORT_SYMBOL_GPL(clk_round_rate); - -/* Set the clock to the requested clock rate. The rate must - * match a supported rate exactly based on what clk_round_rate returns - */ -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EINVAL; - - if (!clk) - return ret; - if (!clk->set_rate || !rate) - return ret; - - mutex_lock(&clocks_mutex); - ret = clk->set_rate(clk, rate); - mutex_unlock(&clocks_mutex); - - return ret; -} -EXPORT_SYMBOL_GPL(clk_set_rate); - -/* Set the clock's parent to another clock source */ -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - struct clk *old; - int ret = -EINVAL; - - if (!clk) - return ret; - if (!clk->set_parent || !parent) - return ret; - - mutex_lock(&clocks_mutex); - old = clk->parent; - if (clk->refcount) - __clk_enable(parent); - ret = clk->set_parent(clk, parent); - if (ret) - old = parent; - if (clk->refcount) - __clk_disable(old); - mutex_unlock(&clocks_mutex); - - return ret; -} -EXPORT_SYMBOL_GPL(clk_set_parent); - -/* Retrieve the clock's parent clock source */ -struct clk *clk_get_parent(struct clk *clk) -{ - if (!clk) - return NULL; - - return clk->parent; -} -EXPORT_SYMBOL_GPL(clk_get_parent); diff --git a/arch/arm/plat-tcc/include/mach/clock.h b/arch/arm/plat-tcc/include/mach/clock.h deleted file mode 100644 index a12f58ad71a8..000000000000 --- a/arch/arm/plat-tcc/include/mach/clock.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Low level clock header file for Telechips TCC architecture - * (C) 2010 Hans J. Koch <hjk@linutronix.de> - * - * Licensed under the GPL v2. - */ - -#ifndef __ASM_ARCH_TCC_CLOCK_H__ -#define __ASM_ARCH_TCC_CLOCK_H__ - -#ifndef __ASSEMBLY__ - -struct clk { - struct clk *parent; - /* id number of a root clock, 0 for normal clocks */ - int root_id; - /* Reference count of clock enable/disable */ - int refcount; - /* Address of associated BCLKCTRx register. Must be set. */ - void __iomem *bclkctr; - /* Bit position for BCLKCTRx. Must be set. */ - int bclk_shift; - /* Address of ACLKxxx register, if any. */ - void __iomem *aclkreg; - /* get the current clock rate (always a fresh value) */ - unsigned long (*get_rate) (struct clk *); - /* Function ptr to set the clock to a new rate. The rate must match a - supported rate returned from round_rate. Leave blank if clock is not - programmable */ - int (*set_rate) (struct clk *, unsigned long); - /* Function ptr to round the requested clock rate to the nearest - supported rate that is less than or equal to the requested rate. */ - unsigned long (*round_rate) (struct clk *, unsigned long); - /* Function ptr to enable the clock. Leave blank if clock can not - be gated. */ - int (*enable) (struct clk *); - /* Function ptr to disable the clock. Leave blank if clock can not - be gated. */ - void (*disable) (struct clk *); - /* Function ptr to set the parent clock of the clock. */ - int (*set_parent) (struct clk *, struct clk *); -}; - -int clk_register(struct clk *clk); -void clk_unregister(struct clk *clk); - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_ARCH_MXC_CLOCK_H__ */ diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S deleted file mode 100644 index cf17d04ec30d..000000000000 --- a/arch/arm/plat-tcc/include/mach/debug-macro.S +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) 1994-1999 Russell King - * Copyright (C) 2008-2009 Telechips - * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - - .macro addruart, rp, rv, tmp - moveq \rp, #0x90000000 @ physical base address - movne \rv, #0xF1000000 @ virtual base - orr \rp, \rp, #0x00007000 @ UART0 - orr \rv, \rv, #0x00007000 @ UART0 - .endm - - .macro senduart,rd,rx - strb \rd, [\rx, #0x44] - .endm - - .macro waituart,rd,rx - .endm - - .macro busyuart,rd,rx -1001: - ldr \rd, [\rx, #0x14] - tst \rd, #0x20 - - beq 1001b - .endm diff --git a/arch/arm/plat-tcc/include/mach/entry-macro.S b/arch/arm/plat-tcc/include/mach/entry-macro.S deleted file mode 100644 index 748f401e4b6d..000000000000 --- a/arch/arm/plat-tcc/include/mach/entry-macro.S +++ /dev/null @@ -1,68 +0,0 @@ -/* - * include/asm-arm/arch-tcc83x/entry-macro.S - * - * Author : <linux@telechips.com> - * Created: June 10, 2008 - * Description: Low-level IRQ helper macros for Telechips-based platforms - * - * Copyright (C) 2008-2009 Telechips - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <mach/hardware.h> -#include <mach/irqs.h> - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - ldr \base, =0xF2003000 @ base address of PIC registers - - @@ read MREQ register of PIC0 - - mov \irqnr, #0 - ldr \irqstat, [\base, #0x00000014 ] @ lower 32 interrupts - cmp \irqstat, #0 - bne 1001f - - @@ read MREQ register of PIC1 - - ldr \irqstat, [\base, #0x00000094] @ upper 32 interrupts - cmp \irqstat, #0 - beq 1002f - mov \irqnr, #0x20 - -1001: - movs \tmp, \irqstat, lsl #16 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #16 - - movs \tmp, \irqstat, lsl #8 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #8 - - movs \tmp, \irqstat, lsl #4 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #4 - - movs \tmp, \irqstat, lsl #2 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #2 - - movs \tmp, \irqstat, lsl #1 - addeq \irqnr, \irqnr, #1 - orrs \base, \base, #1 -1002: - @@ exit here, Z flag unset if IRQ - - .endm diff --git a/arch/arm/plat-tcc/include/mach/hardware.h b/arch/arm/plat-tcc/include/mach/hardware.h deleted file mode 100644 index e70d126ccaf3..000000000000 --- a/arch/arm/plat-tcc/include/mach/hardware.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> - * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com> - * and Dirk Behme <dirk.behme@de.bosch.com> - * Rewritten by: <linux@telechips.com> - * Description: Hardware definitions for TCC8300 processors and boards - * - * Copyright (C) 2001 RidgeRun, Inc. - * Copyright (C) 2008-2009 Telechips - * - * Modifications for mainline (C) 2009 Hans J. Koch <hjk@linutronix.de> - * - * Licensed under the terms of the GNU Pulic License version 2. - */ - -#ifndef __ASM_ARCH_TCC_HARDWARE_H -#define __ASM_ARCH_TCC_HARDWARE_H - -#include <asm/sizes.h> -#ifndef __ASSEMBLER__ -#include <asm/types.h> -#endif -#include <mach/io.h> - -/* - * ---------------------------------------------------------------------------- - * Clocks - * ---------------------------------------------------------------------------- - */ -#define CLKGEN_REG_BASE 0xfffece00 -#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) -#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) -#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) -#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) -#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) -#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) -#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) -#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) - -/* DPLL control registers */ -#define DPLL_CTL 0xfffecf00 - -#endif /* __ASM_ARCH_TCC_HARDWARE_H */ diff --git a/arch/arm/plat-tcc/include/mach/io.h b/arch/arm/plat-tcc/include/mach/io.h deleted file mode 100644 index 3e911d3ea0f1..000000000000 --- a/arch/arm/plat-tcc/include/mach/io.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * IO definitions for TCC8000 processors and boards - * - * Copyright (C) 1997-1999 Russell King - * Copyright (C) 2008-2009 Telechips - * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de> - * - * Licensed under the terms of the GNU Public License version 2. - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/plat-tcc/include/mach/irqs.h b/arch/arm/plat-tcc/include/mach/irqs.h deleted file mode 100644 index da863894d498..000000000000 --- a/arch/arm/plat-tcc/include/mach/irqs.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * IRQ definitions for TCC8xxx - * - * Copyright (C) 2008-2009 Telechips - * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de> - * - * Licensed under the terms of the GPL v2. - * - */ - -#ifndef __ASM_ARCH_TCC_IRQS_H -#define __ASM_ARCH_TCC_IRQS_H - -#define NR_IRQS 64 - -/* PIC0 interrupts */ -#define INT_ADMA1 0 -#define INT_BDMA 1 -#define INT_ADMA0 2 -#define INT_GDMA1 3 -#define INT_I2S0RX 4 -#define INT_I2S0TX 5 -#define INT_TC 6 -#define INT_UART0 7 -#define INT_USBD 8 -#define INT_SPI0TX 9 -#define INT_UDMA 10 -#define INT_LIRQ 11 -#define INT_GDMA2 12 -#define INT_GDMA0 13 -#define INT_TC32 14 -#define INT_LCD 15 -#define INT_ADC 16 -#define INT_I2C 17 -#define INT_RTCP 18 -#define INT_RTCA 19 -#define INT_NFC 20 -#define INT_SD0 21 -#define INT_GSB0 22 -#define INT_PK 23 -#define INT_USBH0 24 -#define INT_USBH1 25 -#define INT_G2D 26 -#define INT_ECC 27 -#define INT_SPI0RX 28 -#define INT_UART1 29 -#define INT_MSCL 30 -#define INT_GSB1 31 -/* PIC1 interrupts */ -#define INT_E0 32 -#define INT_E1 33 -#define INT_E2 34 -#define INT_E3 35 -#define INT_E4 36 -#define INT_E5 37 -#define INT_E6 38 -#define INT_E7 39 -#define INT_UART2 40 -#define INT_UART3 41 -#define INT_SPI1TX 42 -#define INT_SPI1RX 43 -#define INT_GSB2 44 -#define INT_SPDIF 45 -#define INT_CDIF 46 -#define INT_VBON 47 -#define INT_VBOFF 48 -#define INT_SD1 49 -#define INT_UART4 50 -#define INT_GDMA3 51 -#define INT_I2S1RX 52 -#define INT_I2S1TX 53 -#define INT_CAN0 54 -#define INT_CAN1 55 -#define INT_GSB3 56 -#define INT_KRST 57 -#define INT_UNUSED 58 -#define INT_SD0D3 59 -#define INT_SD1D3 60 -#define INT_GPS0 61 -#define INT_GPS1 62 -#define INT_GPS2 63 - -#endif /* ASM_ARCH_TCC_IRQS_H */ diff --git a/arch/arm/plat-tcc/include/mach/system.h b/arch/arm/plat-tcc/include/mach/system.h deleted file mode 100644 index 909e6035d843..000000000000 --- a/arch/arm/plat-tcc/include/mach/system.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Author: <linux@telechips.com> - * Created: June 10, 2008 - * Description: LINUX SYSTEM FUNCTIONS for TCC83x - * - * Copyright (C) 2008-2009 Telechips - * - * Licensed under the terms of the GPL v2. - * - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H -#include <linux/clk.h> - -#include <asm/mach-types.h> -#include <mach/hardware.h> - -extern void plat_tcc_reboot(void); - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode, const char *cmd) -{ - plat_tcc_reboot(); -} - -#endif diff --git a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h deleted file mode 100644 index 1d9428295332..000000000000 --- a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h +++ /dev/null @@ -1,807 +0,0 @@ -/* - * Telechips TCC8000 register definitions - * - * (C) 2009 Hans J. Koch <hjk@linutronix.de> - * - * Licensed under the terms of the GPLv2. - */ - -#ifndef TCC8K_REGS_H -#define TCC8K_REGS_H - -#include <linux/types.h> - -#define EXT_SDRAM_BASE 0x20000000 -#define INT_SRAM_BASE 0x30000000 -#define INT_SRAM_SIZE SZ_32K -#define CS0_BASE 0x40000000 -#define CS1_BASE 0x50000000 -#define CS1_SIZE SZ_64K -#define CS2_BASE 0x60000000 -#define CS3_BASE 0x70000000 -#define AHB_PERI_BASE 0x80000000 -#define AHB_PERI_SIZE SZ_64K -#define APB0_PERI_BASE 0x90000000 -#define APB0_PERI_SIZE SZ_128K -#define APB1_PERI_BASE 0x98000000 -#define APB1_PERI_SIZE SZ_128K -#define DATA_TCM_BASE 0xa0000000 -#define DATA_TCM_SIZE SZ_8K -#define EXT_MEM_CTRL_BASE 0xf0000000 -#define EXT_MEM_CTRL_SIZE SZ_4K - -#define CS1_BASE_VIRT (void __iomem *)0xf7000000 -#define AHB_PERI_BASE_VIRT (void __iomem *)0xf4000000 -#define APB0_PERI_BASE_VIRT (void __iomem *)0xf1000000 -#define APB1_PERI_BASE_VIRT (void __iomem *)0xf2000000 -#define EXT_MEM_CTRL_BASE_VIRT (void __iomem *)0xf3000000 -#define INT_SRAM_BASE_VIRT (void __iomem *)0xf5000000 -#define DATA_TCM_BASE_VIRT (void __iomem *)0xf6000000 - -#define __REG(x) (*((volatile u32 *)(x))) - -/* USB Device Controller Registers */ -#define UDC_BASE (AHB_PERI_BASE_VIRT + 0x8000) -#define UDC_BASE_PHYS (AHB_PERI_BASE + 0x8000) - -#define UDC_IR_OFFS 0x00 -#define UDC_EIR_OFFS 0x04 -#define UDC_EIER_OFFS 0x08 -#define UDC_FAR_OFFS 0x0c -#define UDC_FNR_OFFS 0x10 -#define UDC_EDR_OFFS 0x14 -#define UDC_RT_OFFS 0x18 -#define UDC_SSR_OFFS 0x1c -#define UDC_SCR_OFFS 0x20 -#define UDC_EP0SR_OFFS 0x24 -#define UDC_EP0CR_OFFS 0x28 - -#define UDC_ESR_OFFS 0x2c -#define UDC_ECR_OFFS 0x30 -#define UDC_BRCR_OFFS 0x34 -#define UDC_BWCR_OFFS 0x38 -#define UDC_MPR_OFFS 0x3c -#define UDC_DCR_OFFS 0x40 -#define UDC_DTCR_OFFS 0x44 -#define UDC_DFCR_OFFS 0x48 -#define UDC_DTTCR1_OFFS 0x4c -#define UDC_DTTCR2_OFFS 0x50 -#define UDC_ESR2_OFFS 0x54 - -#define UDC_SCR2_OFFS 0x58 -#define UDC_EP0BUF_OFFS 0x60 -#define UDC_EP1BUF_OFFS 0x64 -#define UDC_EP2BUF_OFFS 0x68 -#define UDC_EP3BUF_OFFS 0x6c -#define UDC_PLICR_OFFS 0xa0 -#define UDC_PCR_OFFS 0xa4 - -#define UDC_UPCR0_OFFS 0xc8 -#define UDC_UPCR1_OFFS 0xcc -#define UDC_UPCR2_OFFS 0xd0 -#define UDC_UPCR3_OFFS 0xd4 - -/* Bits in UDC_EIR */ -#define UDC_EIR_EP0I (1 << 0) -#define UDC_EIR_EP1I (1 << 1) -#define UDC_EIR_EP2I (1 << 2) -#define UDC_EIR_EP3I (1 << 3) -#define UDC_EIR_EPI_MASK 0x0f - -/* Bits in UDC_EIER */ -#define UDC_EIER_EP0IE (1 << 0) -#define UDC_EIER_EP1IE (1 << 1) -#define UDC_EIER_EP2IE (1 << 2) -#define UDC_EIER_EP3IE (1 << 3) - -/* Bits in UDC_FNR */ -#define UDC_FNR_FN_MASK 0x7ff -#define UDC_FNR_SM (1 << 13) -#define UDC_FNR_FTL (1 << 14) - -/* Bits in UDC_SSR */ -#define UDC_SSR_HFRES (1 << 0) -#define UDC_SSR_HFSUSP (1 << 1) -#define UDC_SSR_HFRM (1 << 2) -#define UDC_SSR_SDE (1 << 3) -#define UDC_SSR_HSP (1 << 4) -#define UDC_SSR_DM (1 << 5) -#define UDC_SSR_DP (1 << 6) -#define UDC_SSR_TBM (1 << 7) -#define UDC_SSR_VBON (1 << 8) -#define UDC_SSR_VBOFF (1 << 9) -#define UDC_SSR_EOERR (1 << 10) -#define UDC_SSR_DCERR (1 << 11) -#define UDC_SSR_TCERR (1 << 12) -#define UDC_SSR_BSERR (1 << 13) -#define UDC_SSR_TMERR (1 << 14) -#define UDC_SSR_BAERR (1 << 15) - -/* Bits in UDC_SCR */ -#define UDC_SCR_HRESE (1 << 0) -#define UDC_SCR_HSSPE (1 << 1) -#define UDC_SCR_RRDE (1 << 5) -#define UDC_SCR_SPDEN (1 << 6) -#define UDC_SCR_DIEN (1 << 12) - -/* Bits in UDC_EP0SR */ -#define UDC_EP0SR_RSR (1 << 0) -#define UDC_EP0SR_TST (1 << 1) -#define UDC_EP0SR_SHT (1 << 4) -#define UDC_EP0SR_LWO (1 << 6) - -/* Bits in UDC_EP0CR */ -#define UDC_EP0CR_ESS (1 << 1) - -/* Bits in UDC_ESR */ -#define UDC_ESR_RPS (1 << 0) -#define UDC_ESR_TPS (1 << 1) -#define UDC_ESR_LWO (1 << 4) -#define UDC_ESR_FFS (1 << 6) - -/* Bits in UDC_ECR */ -#define UDC_ECR_ESS (1 << 1) -#define UDC_ECR_CDP (1 << 2) - -#define UDC_ECR_FLUSH (1 << 6) -#define UDC_ECR_DUEN (1 << 7) - -/* Bits in UDC_UPCR0 */ -#define UDC_UPCR0_VBD (1 << 1) -#define UDC_UPCR0_VBDS (1 << 6) -#define UDC_UPCR0_RCD_12 (0x0 << 9) -#define UDC_UPCR0_RCD_24 (0x1 << 9) -#define UDC_UPCR0_RCD_48 (0x2 << 9) -#define UDC_UPCR0_RCS_EXT (0x1 << 11) -#define UDC_UPCR0_RCS_XTAL (0x0 << 11) - -/* Bits in UDC_UPCR1 */ -#define UDC_UPCR1_CDT(x) ((x) << 0) -#define UDC_UPCR1_OTGT(x) ((x) << 3) -#define UDC_UPCR1_SQRXT(x) ((x) << 8) -#define UDC_UPCR1_TXFSLST(x) ((x) << 12) - -/* Bits in UDC_UPCR2 */ -#define UDC_UPCR2_TP (1 << 0) -#define UDC_UPCR2_TXRT(x) ((x) << 2) -#define UDC_UPCR2_TXVRT(x) ((x) << 5) -#define UDC_UPCR2_OPMODE(x) ((x) << 9) -#define UDC_UPCR2_XCVRSEL(x) ((x) << 12) -#define UDC_UPCR2_TM (1 << 14) - -/* USB Host Controller registers */ -#define USBH0_BASE (AHB_PERI_BASE_VIRT + 0xb000) -#define USBH1_BASE (AHB_PERI_BASE_VIRT + 0xb800) - -#define OHCI_INT_ENABLE_OFFS 0x10 - -#define RH_DESCRIPTOR_A_OFFS 0x48 -#define RH_DESCRIPTOR_B_OFFS 0x4c - -#define USBHTCFG0_OFFS 0x100 -#define USBHHCFG0_OFFS 0x104 -#define USBHHCFG1_OFFS 0x104 - -/* DMA controller registers */ -#define DMAC0_BASE (AHB_PERI_BASE + 0x4000) -#define DMAC1_BASE (AHB_PERI_BASE + 0xa000) -#define DMAC2_BASE (AHB_PERI_BASE + 0x4800) -#define DMAC3_BASE (AHB_PERI_BASE + 0xa800) - -#define DMAC_CH_OFFSET(ch) (ch * 0x30) - -#define ST_SADR_OFFS 0x00 -#define SPARAM_OFFS 0x04 -#define C_SADR_OFFS 0x0c -#define ST_DADR_OFFS 0x10 -#define DPARAM_OFFS 0x14 -#define C_DADR_OFFS 0x1c -#define HCOUNT_OFFS 0x20 -#define CHCTRL_OFFS 0x24 -#define RPTCTRL_OFFS 0x28 -#define EXTREQ_A_OFFS 0x2c - -/* Bits in CHCTRL register */ -#define CHCTRL_EN (1 << 0) - -#define CHCTRL_IEN (1 << 2) -#define CHCTRL_FLAG (1 << 3) -#define CHCTRL_WSIZE8 (0 << 4) -#define CHCTRL_WSIZE16 (1 << 4) -#define CHCTRL_WSIZE32 (2 << 4) - -#define CHCTRL_BSIZE1 (0 << 6) -#define CHCTRL_BSIZE2 (1 << 6) -#define CHCTRL_BSIZE4 (2 << 6) -#define CHCTRL_BSIZE8 (3 << 6) - -#define CHCTRL_TYPE_SINGLE_E (0 << 8) -#define CHCTRL_TYPE_HW (1 << 8) -#define CHCTRL_TYPE_SW (2 << 8) -#define CHCTRL_TYPE_SINGLE_L (3 << 8) - -#define CHCTRL_BST (1 << 10) - -/* Use DMA controller 0, channel 2 for USB */ -#define USB_DMA_BASE (DMAC0_BASE + DMAC_CH_OFFSET(2)) - -/* NAND flash controller registers */ -#define NFC_BASE (AHB_PERI_BASE_VIRT + 0xd000) -#define NFC_BASE_PHYS (AHB_PERI_BASE + 0xd000) - -#define NFC_CMD_OFFS 0x00 -#define NFC_LADDR_OFFS 0x04 -#define NFC_BADDR_OFFS 0x08 -#define NFC_SADDR_OFFS 0x0c -#define NFC_WDATA_OFFS 0x10 -#define NFC_LDATA_OFFS 0x20 -#define NFC_SDATA_OFFS 0x40 -#define NFC_CTRL_OFFS 0x50 -#define NFC_PSTART_OFFS 0x54 -#define NFC_RSTART_OFFS 0x58 -#define NFC_DSIZE_OFFS 0x5c -#define NFC_IREQ_OFFS 0x60 -#define NFC_RST_OFFS 0x64 -#define NFC_CTRL1_OFFS 0x68 -#define NFC_MDATA_OFFS 0x70 - -#define NFC_WDATA_PHYS_ADDR (NFC_BASE_PHYS + NFC_WDATA_OFFS) - -/* Bits in NFC_CTRL */ -#define NFC_CTRL_BHLD_MASK (0xf << 0) -#define NFC_CTRL_BPW_MASK (0xf << 4) -#define NFC_CTRL_BSTP_MASK (0xf << 8) -#define NFC_CTRL_CADDR_MASK (0x7 << 12) -#define NFC_CTRL_CADDR_1 (0x0 << 12) -#define NFC_CTRL_CADDR_2 (0x1 << 12) -#define NFC_CTRL_CADDR_3 (0x2 << 12) -#define NFC_CTRL_CADDR_4 (0x3 << 12) -#define NFC_CTRL_CADDR_5 (0x4 << 12) -#define NFC_CTRL_MSK (1 << 15) -#define NFC_CTRL_PSIZE256 (0 << 16) -#define NFC_CTRL_PSIZE512 (1 << 16) -#define NFC_CTRL_PSIZE1024 (2 << 16) -#define NFC_CTRL_PSIZE2048 (3 << 16) -#define NFC_CTRL_PSIZE4096 (4 << 16) -#define NFC_CTRL_PSIZE_MASK (7 << 16) -#define NFC_CTRL_BSIZE1 (0 << 19) -#define NFC_CTRL_BSIZE2 (1 << 19) -#define NFC_CTRL_BSIZE4 (2 << 19) -#define NFC_CTRL_BSIZE8 (3 << 19) -#define NFC_CTRL_BSIZE_MASK (3 << 19) -#define NFC_CTRL_RDY (1 << 21) -#define NFC_CTRL_CS0SEL (1 << 22) -#define NFC_CTRL_CS1SEL (1 << 23) -#define NFC_CTRL_CS2SEL (1 << 24) -#define NFC_CTRL_CS3SEL (1 << 25) -#define NFC_CTRL_CSMASK (0xf << 22) -#define NFC_CTRL_BW (1 << 26) -#define NFC_CTRL_FS (1 << 27) -#define NFC_CTRL_DEN (1 << 28) -#define NFC_CTRL_READ_IEN (1 << 29) -#define NFC_CTRL_PROG_IEN (1 << 30) -#define NFC_CTRL_RDY_IEN (1 << 31) - -/* Bits in NFC_IREQ */ -#define NFC_IREQ_IRQ0 (1 << 0) -#define NFC_IREQ_IRQ1 (1 << 1) -#define NFC_IREQ_IRQ2 (1 << 2) - -#define NFC_IREQ_FLAG0 (1 << 4) -#define NFC_IREQ_FLAG1 (1 << 5) -#define NFC_IREQ_FLAG2 (1 << 6) - -/* MMC controller registers */ -#define MMC0_BASE (AHB_PERI_BASE_VIRT + 0xe000) -#define MMC1_BASE (AHB_PERI_BASE_VIRT + 0xe800) - -/* UART base addresses */ - -#define UART0_BASE (APB0_PERI_BASE_VIRT + 0x07000) -#define UART0_BASE_PHYS (APB0_PERI_BASE + 0x07000) -#define UART1_BASE (APB0_PERI_BASE_VIRT + 0x08000) -#define UART1_BASE_PHYS (APB0_PERI_BASE + 0x08000) -#define UART2_BASE (APB0_PERI_BASE_VIRT + 0x09000) -#define UART2_BASE_PHYS (APB0_PERI_BASE + 0x09000) -#define UART3_BASE (APB0_PERI_BASE_VIRT + 0x0a000) -#define UART3_BASE_PHYS (APB0_PERI_BASE + 0x0a000) -#define UART4_BASE (APB0_PERI_BASE_VIRT + 0x15000) -#define UART4_BASE_PHYS (APB0_PERI_BASE + 0x15000) - -#define UART_BASE UART0_BASE -#define UART_BASE_PHYS UART0_BASE_PHYS - -/* ECC controller */ -#define ECC_CTR_BASE (APB0_PERI_BASE_VIRT + 0xd000) - -#define ECC_CTRL_OFFS 0x00 -#define ECC_BASE_OFFS 0x04 -#define ECC_MASK_OFFS 0x08 -#define ECC_CLEAR_OFFS 0x0c -#define ECC4_0_OFFS 0x10 -#define ECC4_1_OFFS 0x14 - -#define ECC_EADDR0_OFFS 0x50 - -#define ECC_ERRNUM_OFFS 0x90 -#define ECC_IREQ_OFFS 0x94 - -/* Bits in ECC_CTRL */ -#define ECC_CTRL_ECC4_DIEN (1 << 28) -#define ECC_CTRL_ECC8_DIEN (1 << 29) -#define ECC_CTRL_ECC12_DIEN (1 << 30) -#define ECC_CTRL_ECC_DISABLE 0x0 -#define ECC_CTRL_ECC_SLC_ENC 0x8 -#define ECC_CTRL_ECC_SLC_DEC 0x9 -#define ECC_CTRL_ECC4_ENC 0xa -#define ECC_CTRL_ECC4_DEC 0xb -#define ECC_CTRL_ECC8_ENC 0xc -#define ECC_CTRL_ECC8_DEC 0xd -#define ECC_CTRL_ECC12_ENC 0xe -#define ECC_CTRL_ECC12_DEC 0xf - -/* Bits in ECC_IREQ */ -#define ECC_IREQ_E4DI (1 << 4) - -#define ECC_IREQ_E4DF (1 << 20) -#define ECC_IREQ_E4EF (1 << 21) - -/* Interrupt controller */ - -#define PIC0_BASE (APB1_PERI_BASE_VIRT + 0x3000) -#define PIC0_BASE_PHYS (APB1_PERI_BASE + 0x3000) - -#define PIC0_IEN_OFFS 0x00 -#define PIC0_CREQ_OFFS 0x04 -#define PIC0_IREQ_OFFS 0x08 -#define PIC0_IRQSEL_OFFS 0x0c -#define PIC0_SRC_OFFS 0x10 -#define PIC0_MREQ_OFFS 0x14 -#define PIC0_TSTREQ_OFFS 0x18 -#define PIC0_POL_OFFS 0x1c -#define PIC0_IRQ_OFFS 0x20 -#define PIC0_FIQ_OFFS 0x24 -#define PIC0_MIRQ_OFFS 0x28 -#define PIC0_MFIQ_OFFS 0x2c -#define PIC0_TMODE_OFFS 0x30 -#define PIC0_SYNC_OFFS 0x34 -#define PIC0_WKUP_OFFS 0x38 -#define PIC0_TMODEA_OFFS 0x3c -#define PIC0_INTOEN_OFFS 0x40 -#define PIC0_MEN0_OFFS 0x44 -#define PIC0_MEN_OFFS 0x48 - -#define PIC0_IEN __REG(PIC0_BASE + PIC0_IEN_OFFS) -#define PIC0_IEN_PHYS __REG(PIC0_BASE_PHYS + PIC0_IEN_OFFS) -#define PIC0_CREQ __REG(PIC0_BASE + PIC0_CREQ_OFFS) -#define PIC0_CREQ_PHYS __REG(PIC0_BASE_PHYS + PIC0_CREQ_OFFS) -#define PIC0_IREQ __REG(PIC0_BASE + PIC0_IREQ_OFFS) -#define PIC0_IRQSEL __REG(PIC0_BASE + PIC0_IRQSEL_OFFS) -#define PIC0_IRQSEL_PHYS __REG(PIC0_BASE_PHYS + PIC0_IRQSEL_OFFS) -#define PIC0_SRC __REG(PIC0_BASE + PIC0_SRC_OFFS) -#define PIC0_MREQ __REG(PIC0_BASE + PIC0_MREQ_OFFS) -#define PIC0_TSTREQ __REG(PIC0_BASE + PIC0_TSTREQ_OFFS) -#define PIC0_POL __REG(PIC0_BASE + PIC0_POL_OFFS) -#define PIC0_IRQ __REG(PIC0_BASE + PIC0_IRQ_OFFS) -#define PIC0_FIQ __REG(PIC0_BASE + PIC0_FIQ_OFFS) -#define PIC0_MIRQ __REG(PIC0_BASE + PIC0_MIRQ_OFFS) -#define PIC0_MFIQ __REG(PIC0_BASE + PIC0_MFIQ_OFFS) -#define PIC0_TMODE __REG(PIC0_BASE + PIC0_TMODE_OFFS) -#define PIC0_TMODE_PHYS __REG(PIC0_BASE_PHYS + PIC0_TMODE_OFFS) -#define PIC0_SYNC __REG(PIC0_BASE + PIC0_SYNC_OFFS) -#define PIC0_WKUP __REG(PIC0_BASE + PIC0_WKUP_OFFS) -#define PIC0_TMODEA __REG(PIC0_BASE + PIC0_TMODEA_OFFS) -#define PIC0_INTOEN __REG(PIC0_BASE + PIC0_INTOEN_OFFS) -#define PIC0_MEN0 __REG(PIC0_BASE + PIC0_MEN0_OFFS) -#define PIC0_MEN __REG(PIC0_BASE + PIC0_MEN_OFFS) - -#define PIC1_BASE (APB1_PERI_BASE_VIRT + 0x3080) - -#define PIC1_IEN_OFFS 0x00 -#define PIC1_CREQ_OFFS 0x04 -#define PIC1_IREQ_OFFS 0x08 -#define PIC1_IRQSEL_OFFS 0x0c -#define PIC1_SRC_OFFS 0x10 -#define PIC1_MREQ_OFFS 0x14 -#define PIC1_TSTREQ_OFFS 0x18 -#define PIC1_POL_OFFS 0x1c -#define PIC1_IRQ_OFFS 0x20 -#define PIC1_FIQ_OFFS 0x24 -#define PIC1_MIRQ_OFFS 0x28 -#define PIC1_MFIQ_OFFS 0x2c -#define PIC1_TMODE_OFFS 0x30 -#define PIC1_SYNC_OFFS 0x34 -#define PIC1_WKUP_OFFS 0x38 -#define PIC1_TMODEA_OFFS 0x3c -#define PIC1_INTOEN_OFFS 0x40 -#define PIC1_MEN1_OFFS 0x44 -#define PIC1_MEN_OFFS 0x48 - -#define PIC1_IEN __REG(PIC1_BASE + PIC1_IEN_OFFS) -#define PIC1_CREQ __REG(PIC1_BASE + PIC1_CREQ_OFFS) -#define PIC1_IREQ __REG(PIC1_BASE + PIC1_IREQ_OFFS) -#define PIC1_IRQSEL __REG(PIC1_BASE + PIC1_IRQSEL_OFFS) -#define PIC1_SRC __REG(PIC1_BASE + PIC1_SRC_OFFS) -#define PIC1_MREQ __REG(PIC1_BASE + PIC1_MREQ_OFFS) -#define PIC1_TSTREQ __REG(PIC1_BASE + PIC1_TSTREQ_OFFS) -#define PIC1_POL __REG(PIC1_BASE + PIC1_POL_OFFS) -#define PIC1_IRQ __REG(PIC1_BASE + PIC1_IRQ_OFFS) -#define PIC1_FIQ __REG(PIC1_BASE + PIC1_FIQ_OFFS) -#define PIC1_MIRQ __REG(PIC1_BASE + PIC1_MIRQ_OFFS) -#define PIC1_MFIQ __REG(PIC1_BASE + PIC1_MFIQ_OFFS) -#define PIC1_TMODE __REG(PIC1_BASE + PIC1_TMODE_OFFS) -#define PIC1_SYNC __REG(PIC1_BASE + PIC1_SYNC_OFFS) -#define PIC1_WKUP __REG(PIC1_BASE + PIC1_WKUP_OFFS) -#define PIC1_TMODEA __REG(PIC1_BASE + PIC1_TMODEA_OFFS) -#define PIC1_INTOEN __REG(PIC1_BASE + PIC1_INTOEN_OFFS) -#define PIC1_MEN1 __REG(PIC1_BASE + PIC1_MEN1_OFFS) -#define PIC1_MEN __REG(PIC1_BASE + PIC1_MEN_OFFS) - -/* Timer registers */ -#define TIMER_BASE (APB1_PERI_BASE_VIRT + 0x4000) -#define TIMER_BASE_PHYS (APB1_PERI_BASE + 0x4000) - -#define TWDCFG_OFFS 0x70 - -#define TC32EN_OFFS 0x80 -#define TC32LDV_OFFS 0x84 -#define TC32CMP0_OFFS 0x88 -#define TC32CMP1_OFFS 0x8c -#define TC32PCNT_OFFS 0x90 -#define TC32MCNT_OFFS 0x94 -#define TC32IRQ_OFFS 0x98 - -/* Bits in TC32EN */ -#define TC32EN_PRESCALE_MASK 0x00ffffff -#define TC32EN_ENABLE (1 << 24) -#define TC32EN_LOADZERO (1 << 25) -#define TC32EN_STOPMODE (1 << 26) -#define TC32EN_LDM0 (1 << 28) -#define TC32EN_LDM1 (1 << 29) - -/* Bits in TC32IRQ */ -#define TC32IRQ_MSTAT_MASK 0x0000001f -#define TC32IRQ_RSTAT_MASK (0x1f << 8) -#define TC32IRQ_IRQEN0 (1 << 16) -#define TC32IRQ_IRQEN1 (1 << 17) -#define TC32IRQ_IRQEN2 (1 << 18) -#define TC32IRQ_IRQEN3 (1 << 19) -#define TC32IRQ_IRQEN4 (1 << 20) -#define TC32IRQ_RSYNC (1 << 30) -#define TC32IRQ_IRQCLR (1 << 31) - -/* GPIO registers */ -#define GPIOPD_BASE (APB1_PERI_BASE_VIRT + 0x5000) - -#define GPIOPD_DAT_OFFS 0x00 -#define GPIOPD_DOE_OFFS 0x04 -#define GPIOPD_FS0_OFFS 0x08 -#define GPIOPD_FS1_OFFS 0x0c -#define GPIOPD_FS2_OFFS 0x10 -#define GPIOPD_RPU_OFFS 0x30 -#define GPIOPD_RPD_OFFS 0x34 -#define GPIOPD_DV0_OFFS 0x38 -#define GPIOPD_DV1_OFFS 0x3c - -#define GPIOPS_BASE (APB1_PERI_BASE_VIRT + 0x5000) - -#define GPIOPS_DAT_OFFS 0x40 -#define GPIOPS_DOE_OFFS 0x44 -#define GPIOPS_FS0_OFFS 0x48 -#define GPIOPS_FS1_OFFS 0x4c -#define GPIOPS_FS2_OFFS 0x50 -#define GPIOPS_FS3_OFFS 0x54 -#define GPIOPS_RPU_OFFS 0x70 -#define GPIOPS_RPD_OFFS 0x74 -#define GPIOPS_DV0_OFFS 0x78 -#define GPIOPS_DV1_OFFS 0x7c - -#define GPIOPS_FS1_SDH0_BITS 0x000000ff -#define GPIOPS_FS1_SDH1_BITS 0x0000ff00 - -#define GPIOPU_BASE (APB1_PERI_BASE_VIRT + 0x5000) - -#define GPIOPU_DAT_OFFS 0x80 -#define GPIOPU_DOE_OFFS 0x84 -#define GPIOPU_FS0_OFFS 0x88 -#define GPIOPU_FS1_OFFS 0x8c -#define GPIOPU_FS2_OFFS 0x90 -#define GPIOPU_RPU_OFFS 0xb0 -#define GPIOPU_RPD_OFFS 0xb4 -#define GPIOPU_DV0_OFFS 0xb8 -#define GPIOPU_DV1_OFFS 0xbc - -#define GPIOPU_FS0_TXD0 (1 << 0) -#define GPIOPU_FS0_RXD0 (1 << 1) -#define GPIOPU_FS0_CTS0 (1 << 2) -#define GPIOPU_FS0_RTS0 (1 << 3) -#define GPIOPU_FS0_TXD1 (1 << 4) -#define GPIOPU_FS0_RXD1 (1 << 5) -#define GPIOPU_FS0_CTS1 (1 << 6) -#define GPIOPU_FS0_RTS1 (1 << 7) -#define GPIOPU_FS0_TXD2 (1 << 8) -#define GPIOPU_FS0_RXD2 (1 << 9) -#define GPIOPU_FS0_CTS2 (1 << 10) -#define GPIOPU_FS0_RTS2 (1 << 11) -#define GPIOPU_FS0_TXD3 (1 << 12) -#define GPIOPU_FS0_RXD3 (1 << 13) -#define GPIOPU_FS0_CTS3 (1 << 14) -#define GPIOPU_FS0_RTS3 (1 << 15) -#define GPIOPU_FS0_TXD4 (1 << 16) -#define GPIOPU_FS0_RXD4 (1 << 17) -#define GPIOPU_FS0_CTS4 (1 << 18) -#define GPIOPU_FS0_RTS4 (1 << 19) - -#define GPIOFC_BASE (APB1_PERI_BASE_VIRT + 0x5000) - -#define GPIOFC_DAT_OFFS 0xc0 -#define GPIOFC_DOE_OFFS 0xc4 -#define GPIOFC_FS0_OFFS 0xc8 -#define GPIOFC_FS1_OFFS 0xcc -#define GPIOFC_FS2_OFFS 0xd0 -#define GPIOFC_FS3_OFFS 0xd4 -#define GPIOFC_RPU_OFFS 0xf0 -#define GPIOFC_RPD_OFFS 0xf4 -#define GPIOFC_DV0_OFFS 0xf8 -#define GPIOFC_DV1_OFFS 0xfc - -#define GPIOFD_BASE (APB1_PERI_BASE_VIRT + 0x5000) - -#define GPIOFD_DAT_OFFS 0x100 -#define GPIOFD_DOE_OFFS 0x104 -#define GPIOFD_FS0_OFFS 0x108 -#define GPIOFD_FS1_OFFS 0x10c -#define GPIOFD_FS2_OFFS 0x110 -#define GPIOFD_RPU_OFFS 0x130 -#define GPIOFD_RPD_OFFS 0x134 -#define GPIOFD_DV0_OFFS 0x138 -#define GPIOFD_DV1_OFFS 0x13c - -#define GPIOLC_BASE (APB1_PERI_BASE_VIRT + 0x5000) - -#define GPIOLC_DAT_OFFS 0x140 -#define GPIOLC_DOE_OFFS 0x144 -#define GPIOLC_FS0_OFFS 0x148 -#define GPIOLC_FS1_OFFS 0x14c -#define GPIOLC_RPU_OFFS 0x170 -#define GPIOLC_RPD_OFFS 0x174 -#define GPIOLC_DV0_OFFS 0x178 -#define GPIOLC_DV1_OFFS 0x17c - -#define GPIOLD_BASE (APB1_PERI_BASE_VIRT + 0x5000) - -#define GPIOLD_DAT_OFFS 0x180 -#define GPIOLD_DOE_OFFS 0x184 -#define GPIOLD_FS0_OFFS 0x188 -#define GPIOLD_FS1_OFFS 0x18c -#define GPIOLD_FS2_OFFS 0x190 -#define GPIOLD_RPU_OFFS 0x1b0 -#define GPIOLD_RPD_OFFS 0x1b4 -#define GPIOLD_DV0_OFFS 0x1b8 -#define GPIOLD_DV1_OFFS 0x1bc - -#define GPIOAD_BASE (APB1_PERI_BASE_VIRT + 0x5000) - -#define GPIOAD_DAT_OFFS 0x1c0 -#define GPIOAD_DOE_OFFS 0x1c4 -#define GPIOAD_FS0_OFFS 0x1c8 -#define GPIOAD_RPU_OFFS 0x1f0 -#define GPIOAD_RPD_OFFS 0x1f4 -#define GPIOAD_DV0_OFFS 0x1f8 -#define GPIOAD_DV1_OFFS 0x1fc - -#define GPIOXC_BASE (APB1_PERI_BASE_VIRT + 0x5000) - -#define GPIOXC_DAT_OFFS 0x200 -#define GPIOXC_DOE_OFFS 0x204 -#define GPIOXC_FS0_OFFS 0x208 -#define GPIOXC_RPU_OFFS 0x230 -#define GPIOXC_RPD_OFFS 0x234 -#define GPIOXC_DV0_OFFS 0x238 -#define GPIOXC_DV1_OFFS 0x23c - -#define GPIOXC_FS0 __REG(GPIOXC_BASE + GPIOXC_FS0_OFFS) - -#define GPIOXC_FS0_CS0 (1 << 26) -#define GPIOXC_FS0_CS1 (1 << 27) - -#define GPIOXD_BASE (APB1_PERI_BASE_VIRT + 0x5000) - -#define GPIOXD_DAT_OFFS 0x240 -#define GPIOXD_FS0_OFFS 0x248 -#define GPIOXD_RPU_OFFS 0x270 -#define GPIOXD_RPD_OFFS 0x274 -#define GPIOXD_DV0_OFFS 0x278 -#define GPIOXD_DV1_OFFS 0x27c - -#define GPIOPK_BASE (APB1_PERI_BASE_VIRT + 0x1c000) - -#define GPIOPK_RST_OFFS 0x008 -#define GPIOPK_DAT_OFFS 0x100 -#define GPIOPK_DOE_OFFS 0x104 -#define GPIOPK_FS0_OFFS 0x108 -#define GPIOPK_FS1_OFFS 0x10c -#define GPIOPK_FS2_OFFS 0x110 -#define GPIOPK_IRQST_OFFS 0x210 -#define GPIOPK_IRQEN_OFFS 0x214 -#define GPIOPK_IRQPOL_OFFS 0x218 -#define GPIOPK_IRQTM0_OFFS 0x21c -#define GPIOPK_IRQTM1_OFFS 0x220 -#define GPIOPK_CTL_OFFS 0x22c - -#define PMGPIO_BASE (APB1_PERI_BASE_VIRT + 0x10000) -#define BACKUP_RAM_BASE PMGPIO_BASE - -#define PMGPIO_DAT_OFFS 0x800 -#define PMGPIO_DOE_OFFS 0x804 -#define PMGPIO_FS0_OFFS 0x808 -#define PMGPIO_RPU_OFFS 0x810 -#define PMGPIO_RPD_OFFS 0x814 -#define PMGPIO_DV0_OFFS 0x818 -#define PMGPIO_DV1_OFFS 0x81c -#define PMGPIO_EE0_OFFS 0x820 -#define PMGPIO_EE1_OFFS 0x824 -#define PMGPIO_CTL_OFFS 0x828 -#define PMGPIO_DI_OFFS 0x82c -#define PMGPIO_STR_OFFS 0x830 -#define PMGPIO_STF_OFFS 0x834 -#define PMGPIO_POL_OFFS 0x838 -#define PMGPIO_APB_OFFS 0x800 - -/* Clock controller registers */ -#define CKC_BASE ((void __iomem *)(APB1_PERI_BASE_VIRT + 0x6000)) - -#define CLKCTRL_OFFS 0x00 -#define PLL0CFG_OFFS 0x04 -#define PLL1CFG_OFFS 0x08 -#define CLKDIVC0_OFFS 0x0c - -#define BCLKCTR0_OFFS 0x14 -#define SWRESET0_OFFS 0x18 - -#define BCLKCTR1_OFFS 0x60 -#define SWRESET1_OFFS 0x64 -#define PWDCTL_OFFS 0x68 -#define PLL2CFG_OFFS 0x6c -#define CLKDIVC1_OFFS 0x70 - -#define ACLKREF_OFFS 0x80 -#define ACLKI2C_OFFS 0x84 -#define ACLKSPI0_OFFS 0x88 -#define ACLKSPI1_OFFS 0x8c -#define ACLKUART0_OFFS 0x90 -#define ACLKUART1_OFFS 0x94 -#define ACLKUART2_OFFS 0x98 -#define ACLKUART3_OFFS 0x9c -#define ACLKUART4_OFFS 0xa0 -#define ACLKTCT_OFFS 0xa4 -#define ACLKTCX_OFFS 0xa8 -#define ACLKTCZ_OFFS 0xac -#define ACLKADC_OFFS 0xb0 -#define ACLKDAI0_OFFS 0xb4 -#define ACLKDAI1_OFFS 0xb8 -#define ACLKLCD_OFFS 0xbc -#define ACLKSPDIF_OFFS 0xc0 -#define ACLKUSBH_OFFS 0xc4 -#define ACLKSDH0_OFFS 0xc8 -#define ACLKSDH1_OFFS 0xcc -#define ACLKC3DEC_OFFS 0xd0 -#define ACLKEXT_OFFS 0xd4 -#define ACLKCAN0_OFFS 0xd8 -#define ACLKCAN1_OFFS 0xdc -#define ACLKGSB0_OFFS 0xe0 -#define ACLKGSB1_OFFS 0xe4 -#define ACLKGSB2_OFFS 0xe8 -#define ACLKGSB3_OFFS 0xec - -#define PLLxCFG_PD (1 << 31) - -/* CLKCTRL bits */ -#define CLKCTRL_XE (1 << 31) - -/* CLKDIVCx bits */ -#define CLKDIVC0_XTE (1 << 7) -#define CLKDIVC0_XE (1 << 15) -#define CLKDIVC0_P1E (1 << 23) -#define CLKDIVC0_P0E (1 << 31) - -#define CLKDIVC1_P2E (1 << 7) - -/* BCLKCTR0 clock bits */ -#define BCLKCTR0_USBD (1 << 4) -#define BCLKCTR0_ECC (1 << 9) -#define BCLKCTR0_USBH0 (1 << 11) -#define BCLKCTR0_NFC (1 << 16) - -/* BCLKCTR1 clock bits */ -#define BCLKCTR1_USBH1 (1 << 20) - -/* SWRESET0 bits */ -#define SWRESET0_USBD (1 << 4) -#define SWRESET0_USBH0 (1 << 11) - -/* SWRESET1 bits */ -#define SWRESET1_USBH1 (1 << 20) - -/* System clock sources. - * Note: These are the clock sources that serve as parents for - * all other clocks. They have no parents themselves. - * - * These values are used for struct clk->root_id. All clocks - * that are not system clock sources have this value set to - * CLK_SRC_NOROOT. - * The values for system clocks start with CLK_SRC_PLL0 == 0 - * because this gives us exactly the values needed for the lower - * 4 bits of ACLK_* registers. Therefore, CLK_SRC_NOROOT is - * defined as -1 to not disturb the order. - */ -enum root_clks { - CLK_SRC_NOROOT = -1, - CLK_SRC_PLL0 = 0, - CLK_SRC_PLL1, - CLK_SRC_PLL0DIV, - CLK_SRC_PLL1DIV, - CLK_SRC_XI, - CLK_SRC_XIDIV, - CLK_SRC_XTI, - CLK_SRC_XTIDIV, - CLK_SRC_PLL2, - CLK_SRC_PLL2DIV, - CLK_SRC_PK0, - CLK_SRC_PK1, - CLK_SRC_PK2, - CLK_SRC_PK3, - CLK_SRC_PK4, - CLK_SRC_48MHZ -}; - -#define CLK_SRC_MASK 0xf - -/* Bits in ACLK* registers */ -#define ACLK_EN (1 << 28) -#define ACLK_SEL_SHIFT 24 -#define ACLK_SEL_MASK 0x0f000000 -#define ACLK_DIV_MASK 0x00000fff - -/* System configuration registers */ - -#define SCFG_BASE (APB1_PERI_BASE_VIRT + 0x13000) - -#define BMI_OFFS 0x00 -#define AHBCON0_OFFS 0x04 -#define APBPWE_OFFS 0x08 -#define DTCMWAIT_OFFS 0x0c -#define ECCSEL_OFFS 0x10 -#define AHBCON1_OFFS 0x14 -#define SDHCFG_OFFS 0x18 -#define REMAP_OFFS 0x20 -#define LCDSIAE_OFFS 0x24 -#define XMCCFG_OFFS 0xe0 -#define IMCCFG_OFFS 0xe4 - -/* Values for ECCSEL */ -#define ECCSEL_EXTMEM 0x0 -#define ECCSEL_DTCM 0x1 -#define ECCSEL_INT_SRAM 0x2 -#define ECCSEL_AHB 0x3 - -/* Bits in XMCCFG */ -#define XMCCFG_NFCE (1 << 1) -#define XMCCFG_FDXD (1 << 2) - -/* External memory controller registers */ - -#define EMC_BASE EXT_MEM_CTRL_BASE - -#define SDCFG_OFFS 0x00 -#define SDFSM_OFFS 0x04 -#define MCFG_OFFS 0x08 - -#define CSCFG0_OFFS 0x10 -#define CSCFG1_OFFS 0x14 -#define CSCFG2_OFFS 0x18 -#define CSCFG3_OFFS 0x1c - -#define MCFG_SDEN (1 << 4) - -#endif /* TCC8K_REGS_H */ diff --git a/arch/arm/plat-tcc/include/mach/timex.h b/arch/arm/plat-tcc/include/mach/timex.h deleted file mode 100644 index 057acbe651d9..000000000000 --- a/arch/arm/plat-tcc/include/mach/timex.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * A definition needed by arch core code. - * - */ -#define CLOCK_TICK_RATE (HZ * 100000UL) diff --git a/arch/arm/plat-tcc/include/mach/uncompress.h b/arch/arm/plat-tcc/include/mach/uncompress.h deleted file mode 100644 index 7a3e33a27a30..000000000000 --- a/arch/arm/plat-tcc/include/mach/uncompress.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de> - * - * This file is licensed under the terms of the GPL version 2. - */ - -#include <linux/serial_reg.h> -#include <linux/types.h> - -#include <mach/tcc8k-regs.h> - -unsigned int system_rev; - -#define ID_MASK 0x7fff - -static void putc(int c) -{ - u32 *uart_lsr = (u32 *)(UART_BASE_PHYS + (UART_LSR << 2)); - u32 *uart_tx = (u32 *)(UART_BASE_PHYS + (UART_TX << 2)); - - while (!(*uart_lsr & UART_LSR_THRE)) - barrier(); - *uart_tx = c; -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/plat-tcc/include/mach/vmalloc.h b/arch/arm/plat-tcc/include/mach/vmalloc.h deleted file mode 100644 index 99414d9c2b94..000000000000 --- a/arch/arm/plat-tcc/include/mach/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * Author: <linux@telechips.com> - * Created: June 10, 2008 - * - * Copyright (C) 2000 Russell King. - * Copyright (C) 2008-2009 Telechips - * - * Licensed under the terms of the GPL v2. - */ -#define VMALLOC_END 0xf0000000UL diff --git a/arch/arm/plat-tcc/system.c b/arch/arm/plat-tcc/system.c deleted file mode 100644 index cc208fae3e7a..000000000000 --- a/arch/arm/plat-tcc/system.c +++ /dev/null @@ -1,25 +0,0 @@ -/* - * System functions for Telechips TCCxxxx SoCs - * - * Copyright (C) Hans J. Koch <hjk@linutronix.de> - * - * Licensed under the terms of the GPL v2. - * - */ - -#include <linux/io.h> - -#include <mach/tcc8k-regs.h> - -/* System reboot */ -void plat_tcc_reboot(void) -{ - /* Make sure clocks are on */ - __raw_writel(0xffffffff, CKC_BASE + BCLKCTR0_OFFS); - - /* Enable watchdog reset */ - __raw_writel(0x49, TIMER_BASE + TWDCFG_OFFS); - /* Wait for reset */ - while(1) - ; -} diff --git a/arch/arm/plat-versatile/sched-clock.c b/arch/arm/plat-versatile/sched-clock.c index 3d6a4c292cab..b33b74c87232 100644 --- a/arch/arm/plat-versatile/sched-clock.c +++ b/arch/arm/plat-versatile/sched-clock.c @@ -18,41 +18,24 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/kernel.h> #include <linux/io.h> -#include <linux/sched.h> #include <asm/sched_clock.h> #include <plat/sched_clock.h> -static DEFINE_CLOCK_DATA(cd); static void __iomem *ctr; -/* - * Constants generated by clocks_calc_mult_shift(m, s, 24MHz, NSEC_PER_SEC, 60). - * This gives a resolution of about 41ns and a wrap period of about 178s. - */ -#define SC_MULT 2796202667u -#define SC_SHIFT 26 - -unsigned long long notrace sched_clock(void) +static u32 notrace versatile_read_sched_clock(void) { - if (ctr) { - u32 cyc = readl(ctr); - return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, - SC_MULT, SC_SHIFT); - } else - return 0; -} + if (ctr) + return readl(ctr); -static void notrace versatile_update_sched_clock(void) -{ - u32 cyc = readl(ctr); - update_sched_clock(&cd, cyc, (u32)~0); + return 0; } void __init versatile_sched_clock_init(void __iomem *reg, unsigned long rate) { ctr = reg; - init_fixed_sched_clock(&cd, versatile_update_sched_clock, - 32, rate, SC_MULT, SC_SHIFT); + setup_sched_clock(versatile_read_sched_clock, 32, rate); } diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index ccbe16f47227..f9c9f33f8cbe 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -16,7 +16,7 @@ # are merged into mainline or have been edited in the machine database # within the last 12 months. References to machine_is_NAME() do not count! # -# Last update: Sat May 7 08:48:24 2011 +# Last update: Tue Dec 6 11:07:38 2011 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -269,7 +269,7 @@ dns323 MACH_DNS323 DNS323 1542 omap3_beagle MACH_OMAP3_BEAGLE OMAP3_BEAGLE 1546 nokia_n810 MACH_NOKIA_N810 NOKIA_N810 1548 pcm038 MACH_PCM038 PCM038 1551 -ts_x09 MACH_TS209 TS209 1565 +ts209 MACH_TS209 TS209 1565 at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566 mx31moboard MACH_MX31MOBOARD MX31MOBOARD 1574 vision_ep9307 MACH_VISION_EP9307 VISION_EP9307 1578 @@ -321,7 +321,6 @@ lb88rc8480 MACH_LB88RC8480 LB88RC8480 1769 mx25_3ds MACH_MX25_3DS MX25_3DS 1771 omap3530_lv_som MACH_OMAP3530_LV_SOM OMAP3530_LV_SOM 1773 davinci_da830_evm MACH_DAVINCI_DA830_EVM DAVINCI_DA830_EVM 1781 -at572d940hfek MACH_AT572D940HFEB AT572D940HFEB 1783 dove_db MACH_DOVE_DB DOVE_DB 1788 overo MACH_OVERO OVERO 1798 at2440evb MACH_AT2440EVB AT2440EVB 1799 @@ -459,7 +458,7 @@ guruplug MACH_GURUPLUG GURUPLUG 2659 spear310 MACH_SPEAR310 SPEAR310 2660 spear320 MACH_SPEAR320 SPEAR320 2661 aquila MACH_AQUILA AQUILA 2676 -sheeva_esata MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678 +esata_sheevaplug MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678 msm7x30_surf MACH_MSM7X30_SURF MSM7X30_SURF 2679 ea2478devkit MACH_EA2478DEVKIT EA2478DEVKIT 2683 terastation_wxl MACH_TERASTATION_WXL TERASTATION_WXL 2697 @@ -491,380 +490,53 @@ eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35SD EUKREA_CPUIMX35SD 2821 eukrea_cpuimx51sd MACH_EUKREA_CPUIMX51SD EUKREA_CPUIMX51SD 2822 eukrea_cpuimx51 MACH_EUKREA_CPUIMX51 EUKREA_CPUIMX51 2823 smdkc210 MACH_SMDKC210 SMDKC210 2838 -omap3_braillo MACH_OMAP3_BRAILLO OMAP3_BRAILLO 2839 -spyplug MACH_SPYPLUG SPYPLUG 2840 -ginger MACH_GINGER GINGER 2841 -tny_t3530 MACH_TNY_T3530 TNY_T3530 2842 pca102 MACH_PCA102 PCA102 2843 -spade MACH_SPADE SPADE 2844 -mxc25_topaz MACH_MXC25_TOPAZ MXC25_TOPAZ 2845 t5325 MACH_T5325 T5325 2846 -gw2361 MACH_GW2361 GW2361 2847 -elog MACH_ELOG ELOG 2848 income MACH_INCOME INCOME 2849 -bcm589x MACH_BCM589X BCM589X 2850 -etna MACH_ETNA ETNA 2851 -hawks MACH_HAWKS HAWKS 2852 -meson MACH_MESON MESON 2853 -xsbase255 MACH_XSBASE255 XSBASE255 2854 -pvm2030 MACH_PVM2030 PVM2030 2855 -mioa502 MACH_MIOA502 MIOA502 2856 vvbox_sdorig2 MACH_VVBOX_SDORIG2 VVBOX_SDORIG2 2857 vvbox_sdlite2 MACH_VVBOX_SDLITE2 VVBOX_SDLITE2 2858 vvbox_sdpro4 MACH_VVBOX_SDPRO4 VVBOX_SDPRO4 2859 -htc_spv_m700 MACH_HTC_SPV_M700 HTC_SPV_M700 2860 mx257sx MACH_MX257SX MX257SX 2861 goni MACH_GONI GONI 2862 -msm8x55_svlte_ffa MACH_MSM8X55_SVLTE_FFA MSM8X55_SVLTE_FFA 2863 -msm8x55_svlte_surf MACH_MSM8X55_SVLTE_SURF MSM8X55_SVLTE_SURF 2864 -quickstep MACH_QUICKSTEP QUICKSTEP 2865 -dmw96 MACH_DMW96 DMW96 2866 -hammerhead MACH_HAMMERHEAD HAMMERHEAD 2867 -trident MACH_TRIDENT TRIDENT 2868 -lightning MACH_LIGHTNING LIGHTNING 2869 -iconnect MACH_ICONNECT ICONNECT 2870 -autobot MACH_AUTOBOT AUTOBOT 2871 -coconut MACH_COCONUT COCONUT 2872 -durian MACH_DURIAN DURIAN 2873 -cayenne MACH_CAYENNE CAYENNE 2874 -fuji MACH_FUJI FUJI 2875 -synology_6282 MACH_SYNOLOGY_6282 SYNOLOGY_6282 2876 -em1sy MACH_EM1SY EM1SY 2877 -m502 MACH_M502 M502 2878 -matrix518 MACH_MATRIX518 MATRIX518 2879 -tiny_gurnard MACH_TINY_GURNARD TINY_GURNARD 2880 -spear1310 MACH_SPEAR1310 SPEAR1310 2881 bv07 MACH_BV07 BV07 2882 -mxt_td61 MACH_MXT_TD61 MXT_TD61 2883 openrd_ultimate MACH_OPENRD_ULTIMATE OPENRD_ULTIMATE 2884 devixp MACH_DEVIXP DEVIXP 2885 miccpt MACH_MICCPT MICCPT 2886 mic256 MACH_MIC256 MIC256 2887 -as1167 MACH_AS1167 AS1167 2888 -omap3_ibiza MACH_OMAP3_IBIZA OMAP3_IBIZA 2889 u5500 MACH_U5500 U5500 2890 -davinci_picto MACH_DAVINCI_PICTO DAVINCI_PICTO 2891 -mecha MACH_MECHA MECHA 2892 -bubba3 MACH_BUBBA3 BUBBA3 2893 -pupitre MACH_PUPITRE PUPITRE 2894 -tegra_vogue MACH_TEGRA_VOGUE TEGRA_VOGUE 2896 -tegra_e1165 MACH_TEGRA_E1165 TEGRA_E1165 2897 -simplenet MACH_SIMPLENET SIMPLENET 2898 -ec4350tbm MACH_EC4350TBM EC4350TBM 2899 -pec_tc MACH_PEC_TC PEC_TC 2900 -pec_hc2 MACH_PEC_HC2 PEC_HC2 2901 -esl_mobilis_a MACH_ESL_MOBILIS_A ESL_MOBILIS_A 2902 -esl_mobilis_b MACH_ESL_MOBILIS_B ESL_MOBILIS_B 2903 -esl_wave_a MACH_ESL_WAVE_A ESL_WAVE_A 2904 -esl_wave_b MACH_ESL_WAVE_B ESL_WAVE_B 2905 -unisense_mmm MACH_UNISENSE_MMM UNISENSE_MMM 2906 -blueshark MACH_BLUESHARK BLUESHARK 2907 -e10 MACH_E10 E10 2908 -app3k_robin MACH_APP3K_ROBIN APP3K_ROBIN 2909 -pov15hd MACH_POV15HD POV15HD 2910 -stella MACH_STELLA STELLA 2911 linkstation_lschl MACH_LINKSTATION_LSCHL LINKSTATION_LSCHL 2913 -netwalker MACH_NETWALKER NETWALKER 2914 -acsx106 MACH_ACSX106 ACSX106 2915 -atlas5_c1 MACH_ATLAS5_C1 ATLAS5_C1 2916 -nsb3ast MACH_NSB3AST NSB3AST 2917 -gnet_slc MACH_GNET_SLC GNET_SLC 2918 -af4000 MACH_AF4000 AF4000 2919 -ark9431 MACH_ARK9431 ARK9431 2920 -fs_s5pc100 MACH_FS_S5PC100 FS_S5PC100 2921 -omap3505nova8 MACH_OMAP3505NOVA8 OMAP3505NOVA8 2922 -omap3621_edp1 MACH_OMAP3621_EDP1 OMAP3621_EDP1 2923 -oratisaes MACH_ORATISAES ORATISAES 2924 smdkv310 MACH_SMDKV310 SMDKV310 2925 -siemens_l0 MACH_SIEMENS_L0 SIEMENS_L0 2926 -ventana MACH_VENTANA VENTANA 2927 wm8505_7in_netbook MACH_WM8505_7IN_NETBOOK WM8505_7IN_NETBOOK 2928 -ec4350sdb MACH_EC4350SDB EC4350SDB 2929 -mimas MACH_MIMAS MIMAS 2930 -titan MACH_TITAN TITAN 2931 craneboard MACH_CRANEBOARD CRANEBOARD 2932 -es2440 MACH_ES2440 ES2440 2933 -najay_a9263 MACH_NAJAY_A9263 NAJAY_A9263 2934 -htctornado MACH_HTCTORNADO HTCTORNADO 2935 -dimm_mx257 MACH_DIMM_MX257 DIMM_MX257 2936 -jigen301 MACH_JIGEN JIGEN 2937 smdk6450 MACH_SMDK6450 SMDK6450 2938 -meno_qng MACH_MENO_QNG MENO_QNG 2939 -ns2416 MACH_NS2416 NS2416 2940 -rpc353 MACH_RPC353 RPC353 2941 -tq6410 MACH_TQ6410 TQ6410 2942 -sky6410 MACH_SKY6410 SKY6410 2943 -dynasty MACH_DYNASTY DYNASTY 2944 -vivo MACH_VIVO VIVO 2945 -bury_bl7582 MACH_BURY_BL7582 BURY_BL7582 2946 -bury_bps5270 MACH_BURY_BPS5270 BURY_BPS5270 2947 -basi MACH_BASI BASI 2948 -tn200 MACH_TN200 TN200 2949 -c2mmi MACH_C2MMI C2MMI 2950 -meson_6236m MACH_MESON_6236M MESON_6236M 2951 -meson_8626m MACH_MESON_8626M MESON_8626M 2952 -tube MACH_TUBE TUBE 2953 -messina MACH_MESSINA MESSINA 2954 -mx50_arm2 MACH_MX50_ARM2 MX50_ARM2 2955 -cetus9263 MACH_CETUS9263 CETUS9263 2956 brownstone MACH_BROWNSTONE BROWNSTONE 2957 -vmx25 MACH_VMX25 VMX25 2958 -vmx51 MACH_VMX51 VMX51 2959 -abacus MACH_ABACUS ABACUS 2960 -cm4745 MACH_CM4745 CM4745 2961 -oratislink MACH_ORATISLINK ORATISLINK 2962 -davinci_dm365_dvr MACH_DAVINCI_DM365_DVR DAVINCI_DM365_DVR 2963 -netviz MACH_NETVIZ NETVIZ 2964 flexibity MACH_FLEXIBITY FLEXIBITY 2965 -wlan_computer MACH_WLAN_COMPUTER WLAN_COMPUTER 2966 -lpc24xx MACH_LPC24XX LPC24XX 2967 -spica MACH_SPICA SPICA 2968 -gpsdisplay MACH_GPSDISPLAY GPSDISPLAY 2969 -bipnet MACH_BIPNET BIPNET 2970 -overo_ctu_inertial MACH_OVERO_CTU_INERTIAL OVERO_CTU_INERTIAL 2971 -davinci_dm355_mmm MACH_DAVINCI_DM355_MMM DAVINCI_DM355_MMM 2972 -pc9260_v2 MACH_PC9260_V2 PC9260_V2 2973 -ptx7545 MACH_PTX7545 PTX7545 2974 -tm_efdc MACH_TM_EFDC TM_EFDC 2975 -omap3_waldo1 MACH_OMAP3_WALDO1 OMAP3_WALDO1 2977 -flyer MACH_FLYER FLYER 2978 -tornado3240 MACH_TORNADO3240 TORNADO3240 2979 -soli_01 MACH_SOLI_01 SOLI_01 2980 -omapl138_europalc MACH_OMAPL138_EUROPALC OMAPL138_EUROPALC 2981 -helios_v1 MACH_HELIOS_V1 HELIOS_V1 2982 -netspace_lite_v2 MACH_NETSPACE_LITE_V2 NETSPACE_LITE_V2 2983 -ssc MACH_SSC SSC 2984 -premierwave_en MACH_PREMIERWAVE_EN PREMIERWAVE_EN 2985 -wasabi MACH_WASABI WASABI 2986 mx50_rdp MACH_MX50_RDP MX50_RDP 2988 universal_c210 MACH_UNIVERSAL_C210 UNIVERSAL_C210 2989 real6410 MACH_REAL6410 REAL6410 2990 -spx_sakura MACH_SPX_SAKURA SPX_SAKURA 2991 -ij3k_2440 MACH_IJ3K_2440 IJ3K_2440 2992 -omap3_bc10 MACH_OMAP3_BC10 OMAP3_BC10 2993 -thebe MACH_THEBE THEBE 2994 -rv082 MACH_RV082 RV082 2995 -armlguest MACH_ARMLGUEST ARMLGUEST 2996 -tjinc1000 MACH_TJINC1000 TJINC1000 2997 dockstar MACH_DOCKSTAR DOCKSTAR 2998 -ax8008 MACH_AX8008 AX8008 2999 -gnet_sgce MACH_GNET_SGCE GNET_SGCE 3000 -pxwnas_500_1000 MACH_PXWNAS_500_1000 PXWNAS_500_1000 3001 -ea20 MACH_EA20 EA20 3002 -awm2 MACH_AWM2 AWM2 3003 ti8148evm MACH_TI8148EVM TI8148EVM 3004 seaboard MACH_SEABOARD SEABOARD 3005 -linkstation_chlv2 MACH_LINKSTATION_CHLV2 LINKSTATION_CHLV2 3006 -tera_pro2_rack MACH_TERA_PRO2_RACK TERA_PRO2_RACK 3007 -rubys MACH_RUBYS RUBYS 3008 -aquarius MACH_AQUARIUS AQUARIUS 3009 mx53_ard MACH_MX53_ARD MX53_ARD 3010 mx53_smd MACH_MX53_SMD MX53_SMD 3011 -lswxl MACH_LSWXL LSWXL 3012 -dove_avng_v3 MACH_DOVE_AVNG_V3 DOVE_AVNG_V3 3013 -sdi_ess_9263 MACH_SDI_ESS_9263 SDI_ESS_9263 3014 -jocpu550 MACH_JOCPU550 JOCPU550 3015 msm8x60_rumi3 MACH_MSM8X60_RUMI3 MSM8X60_RUMI3 3016 msm8x60_ffa MACH_MSM8X60_FFA MSM8X60_FFA 3017 -yanomami MACH_YANOMAMI YANOMAMI 3018 -gta04 MACH_GTA04 GTA04 3019 cm_a510 MACH_CM_A510 CM_A510 3020 -omap3_rfs200 MACH_OMAP3_RFS200 OMAP3_RFS200 3021 -kx33xx MACH_KX33XX KX33XX 3022 -ptx7510 MACH_PTX7510 PTX7510 3023 -top9000 MACH_TOP9000 TOP9000 3024 -teenote MACH_TEENOTE TEENOTE 3025 -ts3 MACH_TS3 TS3 3026 -a0 MACH_A0 A0 3027 -fsm9xxx_surf MACH_FSM9XXX_SURF FSM9XXX_SURF 3028 -fsm9xxx_ffa MACH_FSM9XXX_FFA FSM9XXX_FFA 3029 -frrhwcdma60w MACH_FRRHWCDMA60W FRRHWCDMA60W 3030 -remus MACH_REMUS REMUS 3031 -at91cap7xdk MACH_AT91CAP7XDK AT91CAP7XDK 3032 -at91cap7stk MACH_AT91CAP7STK AT91CAP7STK 3033 -kt_sbc_sam9_1 MACH_KT_SBC_SAM9_1 KT_SBC_SAM9_1 3034 -armada_xp_db MACH_ARMADA_XP_DB ARMADA_XP_DB 3036 -spdm MACH_SPDM SPDM 3037 -gtib MACH_GTIB GTIB 3038 -dgm3240 MACH_DGM3240 DGM3240 3039 -htcmega MACH_HTCMEGA HTCMEGA 3041 -tricorder MACH_TRICORDER TRICORDER 3042 tx28 MACH_TX28 TX28 3043 -bstbrd MACH_BSTBRD BSTBRD 3044 -pwb3090 MACH_PWB3090 PWB3090 3045 -idea6410 MACH_IDEA6410 IDEA6410 3046 -qbc9263 MACH_QBC9263 QBC9263 3047 -borabora MACH_BORABORA BORABORA 3048 -valdez MACH_VALDEZ VALDEZ 3049 -ls9g20 MACH_LS9G20 LS9G20 3050 -mios_v1 MACH_MIOS_V1 MIOS_V1 3051 -s5pc110_crespo MACH_S5PC110_CRESPO S5PC110_CRESPO 3052 -controltek9g20 MACH_CONTROLTEK9G20 CONTROLTEK9G20 3053 -tin307 MACH_TIN307 TIN307 3054 -tin510 MACH_TIN510 TIN510 3055 -bluecheese MACH_BLUECHEESE BLUECHEESE 3057 -tem3x30 MACH_TEM3X30 TEM3X30 3058 -harvest_desoto MACH_HARVEST_DESOTO HARVEST_DESOTO 3059 -msm8x60_qrdc MACH_MSM8X60_QRDC MSM8X60_QRDC 3060 -spear900 MACH_SPEAR900 SPEAR900 3061 pcontrol_g20 MACH_PCONTROL_G20 PCONTROL_G20 3062 -rdstor MACH_RDSTOR RDSTOR 3063 -usdloader MACH_USDLOADER USDLOADER 3064 -tsoploader MACH_TSOPLOADER TSOPLOADER 3065 -kronos MACH_KRONOS KRONOS 3066 -ffcore MACH_FFCORE FFCORE 3067 -mone MACH_MONE MONE 3068 -unit2s MACH_UNIT2S UNIT2S 3069 -acer_a5 MACH_ACER_A5 ACER_A5 3070 -etherpro_isp MACH_ETHERPRO_ISP ETHERPRO_ISP 3071 -stretchs7000 MACH_STRETCHS7000 STRETCHS7000 3072 -p87_smartsim MACH_P87_SMARTSIM P87_SMARTSIM 3073 -tulip MACH_TULIP TULIP 3074 -sunflower MACH_SUNFLOWER SUNFLOWER 3075 -rib MACH_RIB RIB 3076 -clod MACH_CLOD CLOD 3077 -rump MACH_RUMP RUMP 3078 -tenderloin MACH_TENDERLOIN TENDERLOIN 3079 -shortloin MACH_SHORTLOIN SHORTLOIN 3080 -antares MACH_ANTARES ANTARES 3082 -wb40n MACH_WB40N WB40N 3083 -herring MACH_HERRING HERRING 3084 -naxy400 MACH_NAXY400 NAXY400 3085 -naxy1200 MACH_NAXY1200 NAXY1200 3086 vpr200 MACH_VPR200 VPR200 3087 -bug20 MACH_BUG20 BUG20 3088 -goflexnet MACH_GOFLEXNET GOFLEXNET 3089 torbreck MACH_TORBRECK TORBRECK 3090 -saarb_mg1 MACH_SAARB_MG1 SAARB_MG1 3091 -callisto MACH_CALLISTO CALLISTO 3092 -multhsu MACH_MULTHSU MULTHSU 3093 -saluda MACH_SALUDA SALUDA 3094 -pemp_omap3_apollo MACH_PEMP_OMAP3_APOLLO PEMP_OMAP3_APOLLO 3095 -vc0718 MACH_VC0718 VC0718 3096 -mvblx MACH_MVBLX MVBLX 3097 -inhand_apeiron MACH_INHAND_APEIRON INHAND_APEIRON 3098 -inhand_fury MACH_INHAND_FURY INHAND_FURY 3099 -inhand_siren MACH_INHAND_SIREN INHAND_SIREN 3100 -hdnvp MACH_HDNVP HDNVP 3101 -softwinner MACH_SOFTWINNER SOFTWINNER 3102 prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103 -nas6210 MACH_NAS6210 NAS6210 3104 -unisdev MACH_UNISDEV UNISDEV 3105 -sbca11 MACH_SBCA11 SBCA11 3106 -saga MACH_SAGA SAGA 3107 -ns_k330 MACH_NS_K330 NS_K330 3108 -tanna MACH_TANNA TANNA 3109 -imate8502 MACH_IMATE8502 IMATE8502 3110 -aspen MACH_ASPEN ASPEN 3111 -daintree_cwac MACH_DAINTREE_CWAC DAINTREE_CWAC 3112 -zmx25 MACH_ZMX25 ZMX25 3113 -maple1 MACH_MAPLE1 MAPLE1 3114 -qsd8x72_surf MACH_QSD8X72_SURF QSD8X72_SURF 3115 -qsd8x72_ffa MACH_QSD8X72_FFA QSD8X72_FFA 3116 -abilene MACH_ABILENE ABILENE 3117 -eigen_ttr MACH_EIGEN_TTR EIGEN_TTR 3118 -iomega_ix2_200 MACH_IOMEGA_IX2_200 IOMEGA_IX2_200 3119 -coretec_vcx7400 MACH_CORETEC_VCX7400 CORETEC_VCX7400 3120 -santiago MACH_SANTIAGO SANTIAGO 3121 -mx257sol MACH_MX257SOL MX257SOL 3122 -strasbourg MACH_STRASBOURG STRASBOURG 3123 -msm8x60_fluid MACH_MSM8X60_FLUID MSM8X60_FLUID 3124 -smartqv5 MACH_SMARTQV5 SMARTQV5 3125 -smartqv3 MACH_SMARTQV3 SMARTQV3 3126 -smartqv7 MACH_SMARTQV7 SMARTQV7 3127 paz00 MACH_PAZ00 PAZ00 3128 acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129 -fwbd_0404 MACH_FWBD_0404 FWBD_0404 3131 -hdgu MACH_HDGU HDGU 3132 -pyramid MACH_PYRAMID PYRAMID 3133 -epiphan MACH_EPIPHAN EPIPHAN 3134 -omap_bender MACH_OMAP_BENDER OMAP_BENDER 3135 -gurnard MACH_GURNARD GURNARD 3136 -gtl_it5100 MACH_GTL_IT5100 GTL_IT5100 3137 -bcm2708 MACH_BCM2708 BCM2708 3138 -mx51_ggc MACH_MX51_GGC MX51_GGC 3139 -sharespace MACH_SHARESPACE SHARESPACE 3140 -haba_knx_explorer MACH_HABA_KNX_EXPLORER HABA_KNX_EXPLORER 3141 -simtec_kirkmod MACH_SIMTEC_KIRKMOD SIMTEC_KIRKMOD 3142 -crux MACH_CRUX CRUX 3143 -mx51_bravo MACH_MX51_BRAVO MX51_BRAVO 3144 -charon MACH_CHARON CHARON 3145 -picocom3 MACH_PICOCOM3 PICOCOM3 3146 -picocom4 MACH_PICOCOM4 PICOCOM4 3147 -serrano MACH_SERRANO SERRANO 3148 -doubleshot MACH_DOUBLESHOT DOUBLESHOT 3149 -evsy MACH_EVSY EVSY 3150 -huashan MACH_HUASHAN HUASHAN 3151 -lausanne MACH_LAUSANNE LAUSANNE 3152 -emerald MACH_EMERALD EMERALD 3153 -tqma35 MACH_TQMA35 TQMA35 3154 -marvel MACH_MARVEL MARVEL 3155 -manuae MACH_MANUAE MANUAE 3156 -chacha MACH_CHACHA CHACHA 3157 -lemon MACH_LEMON LEMON 3158 -csc MACH_CSC CSC 3159 -gira_knxip_router MACH_GIRA_KNXIP_ROUTER GIRA_KNXIP_ROUTER 3160 -t20 MACH_T20 T20 3161 -hdmini MACH_HDMINI HDMINI 3162 -sciphone_g2 MACH_SCIPHONE_G2 SCIPHONE_G2 3163 -express MACH_EXPRESS EXPRESS 3164 -express_kt MACH_EXPRESS_KT EXPRESS_KT 3165 -maximasp MACH_MAXIMASP MAXIMASP 3166 -nitrogen_imx51 MACH_NITROGEN_IMX51 NITROGEN_IMX51 3167 -nitrogen_imx53 MACH_NITROGEN_IMX53 NITROGEN_IMX53 3168 -sunfire MACH_SUNFIRE SUNFIRE 3169 -arowana MACH_AROWANA AROWANA 3170 -tegra_daytona MACH_TEGRA_DAYTONA TEGRA_DAYTONA 3171 -tegra_swordfish MACH_TEGRA_SWORDFISH TEGRA_SWORDFISH 3172 -edison MACH_EDISON EDISON 3173 -svp8500v1 MACH_SVP8500V1 SVP8500V1 3174 -svp8500v2 MACH_SVP8500V2 SVP8500V2 3175 -svp5500 MACH_SVP5500 SVP5500 3176 -b5500 MACH_B5500 B5500 3177 -s5500 MACH_S5500 S5500 3178 -icon MACH_ICON ICON 3179 -elephant MACH_ELEPHANT ELEPHANT 3180 -shooter MACH_SHOOTER SHOOTER 3182 -spade_lte MACH_SPADE_LTE SPADE_LTE 3183 -philhwani MACH_PHILHWANI PHILHWANI 3184 -gsncomm MACH_GSNCOMM GSNCOMM 3185 -strasbourg_a2 MACH_STRASBOURG_A2 STRASBOURG_A2 3186 -mmm MACH_MMM MMM 3187 -davinci_dm365_bv MACH_DAVINCI_DM365_BV DAVINCI_DM365_BV 3188 ag5evm MACH_AG5EVM AG5EVM 3189 -sc575plc MACH_SC575PLC SC575PLC 3190 -sc575hmi MACH_SC575IPC SC575IPC 3191 -omap3_tdm3730 MACH_OMAP3_TDM3730 OMAP3_TDM3730 3192 -top9000_eval MACH_TOP9000_EVAL TOP9000_EVAL 3194 -top9000_su MACH_TOP9000_SU TOP9000_SU 3195 -utm300 MACH_UTM300 UTM300 3196 tsunagi MACH_TSUNAGI TSUNAGI 3197 -ts75xx MACH_TS75XX TS75XX 3198 -ts47xx MACH_TS47XX TS47XX 3200 -da850_k5 MACH_DA850_K5 DA850_K5 3201 -ax502 MACH_AX502 AX502 3202 -igep0032 MACH_IGEP0032 IGEP0032 3203 -antero MACH_ANTERO ANTERO 3204 -synergy MACH_SYNERGY SYNERGY 3205 ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206 wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207 -punica MACH_PUNICA PUNICA 3208 trimslice MACH_TRIMSLICE TRIMSLICE 3209 -mx27_wmultra MACH_MX27_WMULTRA MX27_WMULTRA 3210 mackerel MACH_MACKEREL MACKEREL 3211 -fa9x27 MACH_FA9X27 FA9X27 3213 -ns2816tb MACH_NS2816TB NS2816TB 3214 -ns2816_ntpad MACH_NS2816_NTPAD NS2816_NTPAD 3215 -ns2816_ntnb MACH_NS2816_NTNB NS2816_NTNB 3216 kaen MACH_KAEN KAEN 3217 -nv1000 MACH_NV1000 NV1000 3218 -nuc950ts MACH_NUC950TS NUC950TS 3219 nokia_rm680 MACH_NOKIA_RM680 NOKIA_RM680 3220 -ast2200 MACH_AST2200 AST2200 3221 -lead MACH_LEAD LEAD 3222 -unino1 MACH_UNINO1 UNINO1 3223 -greeco MACH_GREECO GREECO 3224 -verdi MACH_VERDI VERDI 3225 dm6446_adbox MACH_DM6446_ADBOX DM6446_ADBOX 3226 quad_salsa MACH_QUAD_SALSA QUAD_SALSA 3227 abb_gma_1_1 MACH_ABB_GMA_1_1 ABB_GMA_1_1 3228 @@ -949,13 +621,11 @@ koi MACH_KOI KOI 3312 ts4800 MACH_TS4800 TS4800 3313 tqma9263 MACH_TQMA9263 TQMA9263 3314 holiday MACH_HOLIDAY HOLIDAY 3315 -dma_6410 MACH_DMA6410 DMA6410 3316 pcats_overlay MACH_PCATS_OVERLAY PCATS_OVERLAY 3317 hwgw6410 MACH_HWGW6410 HWGW6410 3318 shenzhou MACH_SHENZHOU SHENZHOU 3319 cwme9210 MACH_CWME9210 CWME9210 3320 cwme9210js MACH_CWME9210JS CWME9210JS 3321 -pgs_v1 MACH_PGS_SITARA PGS_SITARA 3322 colibri_tegra2 MACH_COLIBRI_TEGRA2 COLIBRI_TEGRA2 3323 w21 MACH_W21 W21 3324 polysat1 MACH_POLYSAT1 POLYSAT1 3325 @@ -1021,13 +691,11 @@ viprinet MACH_VIPRINET VIPRINET 3385 bockw MACH_BOCKW BOCKW 3386 eva2000 MACH_EVA2000 EVA2000 3387 steelyard MACH_STEELYARD STEELYARD 3388 -sdh001 MACH_MACH_SDH001 MACH_SDH001 3390 nsslsboard MACH_NSSLSBOARD NSSLSBOARD 3392 geneva_b5 MACH_GENEVA_B5 GENEVA_B5 3393 spear1340 MACH_SPEAR1340 SPEAR1340 3394 rexmas MACH_REXMAS REXMAS 3395 msm8960_cdp MACH_MSM8960_CDP MSM8960_CDP 3396 -msm8960_mdp MACH_MSM8960_MDP MSM8960_MDP 3397 msm8960_fluid MACH_MSM8960_FLUID MSM8960_FLUID 3398 msm8960_apq MACH_MSM8960_APQ MSM8960_APQ 3399 helios_v2 MACH_HELIOS_V2 HELIOS_V2 3400 @@ -1123,6 +791,381 @@ blissc MACH_BLISSC BLISSC 3491 thales_adc MACH_THALES_ADC THALES_ADC 3492 ubisys_p9d_evp MACH_UBISYS_P9D_EVP UBISYS_P9D_EVP 3493 atdgp318 MACH_ATDGP318 ATDGP318 3494 +dma210u MACH_DMA210U DMA210U 3495 +em_t3 MACH_EM_T3 EM_T3 3496 +htx3250 MACH_HTX3250 HTX3250 3497 +g50 MACH_G50 G50 3498 +eco5 MACH_ECO5 ECO5 3499 +wintergrasp MACH_WINTERGRASP WINTERGRASP 3500 +puro MACH_PURO PURO 3501 +shooter_k MACH_SHOOTER_K SHOOTER_K 3502 +nspire MACH_NSPIRE NSPIRE 3503 +mickxx MACH_MICKXX MICKXX 3504 +lxmb MACH_LXMB LXMB 3505 +adam MACH_ADAM ADAM 3507 +b1004 MACH_B1004 B1004 3508 +oboea MACH_OBOEA OBOEA 3509 +a1015 MACH_A1015 A1015 3510 +robin_vbdt30 MACH_ROBIN_VBDT30 ROBIN_VBDT30 3511 +tegra_enterprise MACH_TEGRA_ENTERPRISE TEGRA_ENTERPRISE 3512 +rfl108200_mk10 MACH_RFL108200_MK10 RFL108200_MK10 3513 +rfl108300_mk16 MACH_RFL108300_MK16 RFL108300_MK16 3514 +rover_v7 MACH_ROVER_V7 ROVER_V7 3515 +miphone MACH_MIPHONE MIPHONE 3516 +femtobts MACH_FEMTOBTS FEMTOBTS 3517 +monopoli MACH_MONOPOLI MONOPOLI 3518 +boss MACH_BOSS BOSS 3519 +davinci_dm368_vtam MACH_DAVINCI_DM368_VTAM DAVINCI_DM368_VTAM 3520 +clcon MACH_CLCON CLCON 3521 +nokia_rm696 MACH_NOKIA_RM696 NOKIA_RM696 3522 +tahiti MACH_TAHITI TAHITI 3523 +fighter MACH_FIGHTER FIGHTER 3524 +sgh_i710 MACH_SGH_I710 SGH_I710 3525 +integreproscb MACH_INTEGREPROSCB INTEGREPROSCB 3526 +monza MACH_MONZA MONZA 3527 +calimain MACH_CALIMAIN CALIMAIN 3528 +mx6q_sabreauto MACH_MX6Q_SABREAUTO MX6Q_SABREAUTO 3529 +gma01x MACH_GMA01X GMA01X 3530 +sbc51 MACH_SBC51 SBC51 3531 +fit MACH_FIT FIT 3532 +steelhead MACH_STEELHEAD STEELHEAD 3533 +panther MACH_PANTHER PANTHER 3534 +msm8960_liquid MACH_MSM8960_LIQUID MSM8960_LIQUID 3535 +lexikonct MACH_LEXIKONCT LEXIKONCT 3536 +ns2816_stb MACH_NS2816_STB NS2816_STB 3537 +sei_mm2_lpc3250 MACH_SEI_MM2_LPC3250 SEI_MM2_LPC3250 3538 +cmimx53 MACH_CMIMX53 CMIMX53 3539 +sandwich MACH_SANDWICH SANDWICH 3540 +chief MACH_CHIEF CHIEF 3541 +pogo_e02 MACH_POGO_E02 POGO_E02 3542 +mikrap_x168 MACH_MIKRAP_X168 MIKRAP_X168 3543 +htcmozart MACH_HTCMOZART HTCMOZART 3544 +htcgold MACH_HTCGOLD HTCGOLD 3545 +mt72xx MACH_MT72XX MT72XX 3546 +mx51_ivy MACH_MX51_IVY MX51_IVY 3547 +mx51_lvd MACH_MX51_LVD MX51_LVD 3548 +omap3_wiser2 MACH_OMAP3_WISER2 OMAP3_WISER2 3549 +dreamplug MACH_DREAMPLUG DREAMPLUG 3550 +cobas_c_111 MACH_COBAS_C_111 COBAS_C_111 3551 +cobas_u_411 MACH_COBAS_U_411 COBAS_U_411 3552 +hssd MACH_HSSD HSSD 3553 +iom35x MACH_IOM35X IOM35X 3554 +psom_omap MACH_PSOM_OMAP PSOM_OMAP 3555 +iphone_2g MACH_IPHONE_2G IPHONE_2G 3556 +iphone_3g MACH_IPHONE_3G IPHONE_3G 3557 +ipod_touch_1g MACH_IPOD_TOUCH_1G IPOD_TOUCH_1G 3558 +pharos_tpc MACH_PHAROS_TPC PHAROS_TPC 3559 +mx53_hydra MACH_MX53_HYDRA MX53_HYDRA 3560 +ns2816_dev_board MACH_NS2816_DEV_BOARD NS2816_DEV_BOARD 3561 +iphone_3gs MACH_IPHONE_3GS IPHONE_3GS 3562 +iphone_4 MACH_IPHONE_4 IPHONE_4 3563 +ipod_touch_4g MACH_IPOD_TOUCH_4G IPOD_TOUCH_4G 3564 +dragon_e1100 MACH_DRAGON_E1100 DRAGON_E1100 3565 +topside MACH_TOPSIDE TOPSIDE 3566 +irisiii MACH_IRISIII IRISIII 3567 +deto_macarm9 MACH_DETO_MACARM9 DETO_MACARM9 3568 +eti_d1 MACH_ETI_D1 ETI_D1 3569 +som3530sdk MACH_SOM3530SDK SOM3530SDK 3570 +oc_engine MACH_OC_ENGINE OC_ENGINE 3571 +apq8064_sim MACH_APQ8064_SIM APQ8064_SIM 3572 +alps MACH_ALPS ALPS 3575 +tny_t3730 MACH_TNY_T3730 TNY_T3730 3576 +geryon_nfe MACH_GERYON_NFE GERYON_NFE 3577 +ns2816_ref_board MACH_NS2816_REF_BOARD NS2816_REF_BOARD 3578 +silverstone MACH_SILVERSTONE SILVERSTONE 3579 +mtt2440 MACH_MTT2440 MTT2440 3580 +ynicdb MACH_YNICDB YNICDB 3581 +bct MACH_BCT BCT 3582 +tuscan MACH_TUSCAN TUSCAN 3583 +xbt_sam9g45 MACH_XBT_SAM9G45 XBT_SAM9G45 3584 +enbw_cmc MACH_ENBW_CMC ENBW_CMC 3585 +ch104mx257 MACH_CH104MX257 CH104MX257 3587 +openpri MACH_OPENPRI OPENPRI 3588 +am335xevm MACH_AM335XEVM AM335XEVM 3589 +picodmb MACH_PICODMB PICODMB 3590 +waluigi MACH_WALUIGI WALUIGI 3591 +punicag7 MACH_PUNICAG7 PUNICAG7 3592 +ipad_1g MACH_IPAD_1G IPAD_1G 3593 +appletv_2g MACH_APPLETV_2G APPLETV_2G 3594 +mach_ecog45 MACH_MACH_ECOG45 MACH_ECOG45 3595 +ait_cam_enc_4xx MACH_AIT_CAM_ENC_4XX AIT_CAM_ENC_4XX 3596 +runnymede MACH_RUNNYMEDE RUNNYMEDE 3597 +play MACH_PLAY PLAY 3598 +hw90260 MACH_HW90260 HW90260 3599 +tagh MACH_TAGH TAGH 3600 +filbert MACH_FILBERT FILBERT 3601 +getinge_netcomv3 MACH_GETINGE_NETCOMV3 GETINGE_NETCOMV3 3602 +cw20 MACH_CW20 CW20 3603 +cinema MACH_CINEMA CINEMA 3604 +cinema_tea MACH_CINEMA_TEA CINEMA_TEA 3605 +cinema_coffee MACH_CINEMA_COFFEE CINEMA_COFFEE 3606 +cinema_juice MACH_CINEMA_JUICE CINEMA_JUICE 3607 +mx53_mirage2 MACH_MX53_MIRAGE2 MX53_MIRAGE2 3609 +mx53_efikasb MACH_MX53_EFIKASB MX53_EFIKASB 3610 +stm_b2000 MACH_STM_B2000 STM_B2000 3612 m28evk MACH_M28EVK M28EVK 3613 +pda MACH_PDA PDA 3614 +meraki_mr58 MACH_MERAKI_MR58 MERAKI_MR58 3615 +kota2 MACH_KOTA2 KOTA2 3616 +letcool MACH_LETCOOL LETCOOL 3617 +mx27iat MACH_MX27IAT MX27IAT 3618 +apollo_td MACH_APOLLO_TD APOLLO_TD 3619 +arena MACH_ARENA ARENA 3620 +gsngateway MACH_GSNGATEWAY GSNGATEWAY 3621 +lf2000 MACH_LF2000 LF2000 3622 +bonito MACH_BONITO BONITO 3623 +asymptote MACH_ASYMPTOTE ASYMPTOTE 3624 +bst2brd MACH_BST2BRD BST2BRD 3625 +tx335s MACH_TX335S TX335S 3626 +pelco_tesla MACH_PELCO_TESLA PELCO_TESLA 3627 +rrhtestplat MACH_RRHTESTPLAT RRHTESTPLAT 3628 +vidtonic_pro MACH_VIDTONIC_PRO VIDTONIC_PRO 3629 +pl_apollo MACH_PL_APOLLO PL_APOLLO 3630 +pl_phoenix MACH_PL_PHOENIX PL_PHOENIX 3631 +m28cu3 MACH_M28CU3 M28CU3 3632 +vvbox_hd MACH_VVBOX_HD VVBOX_HD 3633 +coreware_sam9260_ MACH_COREWARE_SAM9260_ COREWARE_SAM9260_ 3634 +marmaduke MACH_MARMADUKE MARMADUKE 3635 +amg_xlcore_camera MACH_AMG_XLCORE_CAMERA AMG_XLCORE_CAMERA 3636 +omap3_egf MACH_OMAP3_EGF OMAP3_EGF 3637 smdk4212 MACH_SMDK4212 SMDK4212 3638 +dnp9200 MACH_DNP9200 DNP9200 3639 +tf101 MACH_TF101 TF101 3640 +omap3silvio MACH_OMAP3SILVIO OMAP3SILVIO 3641 +picasso2 MACH_PICASSO2 PICASSO2 3642 +vangogh2 MACH_VANGOGH2 VANGOGH2 3643 +olpc_xo_1_75 MACH_OLPC_XO_1_75 OLPC_XO_1_75 3644 +gx400 MACH_GX400 GX400 3645 +gs300 MACH_GS300 GS300 3646 +acer_a9 MACH_ACER_A9 ACER_A9 3647 +vivow_evm MACH_VIVOW_EVM VIVOW_EVM 3648 +veloce_cxq MACH_VELOCE_CXQ VELOCE_CXQ 3649 +veloce_cxm MACH_VELOCE_CXM VELOCE_CXM 3650 +p1852 MACH_P1852 P1852 3651 +naxy100 MACH_NAXY100 NAXY100 3652 +taishan MACH_TAISHAN TAISHAN 3653 +touchlink MACH_TOUCHLINK TOUCHLINK 3654 +stm32f103ze MACH_STM32F103ZE STM32F103ZE 3655 +mcx MACH_MCX MCX 3656 +stm_nmhdk_fli7610 MACH_STM_NMHDK_FLI7610 STM_NMHDK_FLI7610 3657 +top28x MACH_TOP28X TOP28X 3658 +okl4vp_microvisor MACH_OKL4VP_MICROVISOR OKL4VP_MICROVISOR 3659 +pop MACH_POP POP 3660 +layer MACH_LAYER LAYER 3661 +trondheim MACH_TRONDHEIM TRONDHEIM 3662 +eva MACH_EVA EVA 3663 +trust_taurus MACH_TRUST_TAURUS TRUST_TAURUS 3664 +ns2816_huashan MACH_NS2816_HUASHAN NS2816_HUASHAN 3665 +ns2816_yangcheng MACH_NS2816_YANGCHENG NS2816_YANGCHENG 3666 +p852 MACH_P852 P852 3667 +flea3 MACH_FLEA3 FLEA3 3668 +bowfin MACH_BOWFIN BOWFIN 3669 +mv88de3100 MACH_MV88DE3100 MV88DE3100 3670 +pia_am35x MACH_PIA_AM35X PIA_AM35X 3671 +cedar MACH_CEDAR CEDAR 3672 +picasso_e MACH_PICASSO_E PICASSO_E 3673 +samsung_e60 MACH_SAMSUNG_E60 SAMSUNG_E60 3674 +sdvr_mini MACH_SDVR_MINI SDVR_MINI 3676 +omap3_ij3k MACH_OMAP3_IJ3K OMAP3_IJ3K 3677 +modasmc1 MACH_MODASMC1 MODASMC1 3678 +apq8064_rumi3 MACH_APQ8064_RUMI3 APQ8064_RUMI3 3679 +matrix506 MACH_MATRIX506 MATRIX506 3680 +msm9615_mtp MACH_MSM9615_MTP MSM9615_MTP 3681 +dm36x_spawndc MACH_DM36X_SPAWNDC DM36X_SPAWNDC 3682 +sff792 MACH_SFF792 SFF792 3683 +am335xiaevm MACH_AM335XIAEVM AM335XIAEVM 3684 +g3c2440 MACH_G3C2440 G3C2440 3685 +tion270 MACH_TION270 TION270 3686 +w22q7arm02 MACH_W22Q7ARM02 W22Q7ARM02 3687 +omap_cat MACH_OMAP_CAT OMAP_CAT 3688 +at91sam9n12ek MACH_AT91SAM9N12EK AT91SAM9N12EK 3689 +morrison MACH_MORRISON MORRISON 3690 +svdu MACH_SVDU SVDU 3691 +lpp01 MACH_LPP01 LPP01 3692 +ubc283 MACH_UBC283 UBC283 3693 +zeppelin MACH_ZEPPELIN ZEPPELIN 3694 +motus MACH_MOTUS MOTUS 3695 +neomainboard MACH_NEOMAINBOARD NEOMAINBOARD 3696 +devkit3250 MACH_DEVKIT3250 DEVKIT3250 3697 +devkit7000 MACH_DEVKIT7000 DEVKIT7000 3698 +fmc_uic MACH_FMC_UIC FMC_UIC 3699 +fmc_dcm MACH_FMC_DCM FMC_DCM 3700 +batwm MACH_BATWM BATWM 3701 +atlas6cb MACH_ATLAS6CB ATLAS6CB 3702 +blue MACH_BLUE BLUE 3705 +colorado MACH_COLORADO COLORADO 3706 +popc MACH_POPC POPC 3707 +promwad_jade MACH_PROMWAD_JADE PROMWAD_JADE 3708 +amp MACH_AMP AMP 3709 +gnet_amp MACH_GNET_AMP GNET_AMP 3710 +toques MACH_TOQUES TOQUES 3711 +dct_storm MACH_DCT_STORM DCT_STORM 3713 +owl MACH_OWL OWL 3715 +cogent_csb1741 MACH_COGENT_CSB1741 COGENT_CSB1741 3716 +adillustra610 MACH_ADILLUSTRA610 ADILLUSTRA610 3718 +ecafe_na04 MACH_ECAFE_NA04 ECAFE_NA04 3719 +popct MACH_POPCT POPCT 3720 +omap3_helena MACH_OMAP3_HELENA OMAP3_HELENA 3721 +ach MACH_ACH ACH 3722 +module_dtb MACH_MODULE_DTB MODULE_DTB 3723 +oslo_elisabeth MACH_OSLO_ELISABETH OSLO_ELISABETH 3725 +tt01 MACH_TT01 TT01 3726 +msm8930_cdp MACH_MSM8930_CDP MSM8930_CDP 3727 +msm8930_mtp MACH_MSM8930_MTP MSM8930_MTP 3728 +msm8930_fluid MACH_MSM8930_FLUID MSM8930_FLUID 3729 +ltu11 MACH_LTU11 LTU11 3730 +am1808_spawnco MACH_AM1808_SPAWNCO AM1808_SPAWNCO 3731 +flx6410 MACH_FLX6410 FLX6410 3732 +mx6q_qsb MACH_MX6Q_QSB MX6Q_QSB 3733 +mx53_plt424 MACH_MX53_PLT424 MX53_PLT424 3734 +jasmine MACH_JASMINE JASMINE 3735 +l138_owlboard_plus MACH_L138_OWLBOARD_PLUS L138_OWLBOARD_PLUS 3736 +wr21 MACH_WR21 WR21 3737 +peaboy MACH_PEABOY PEABOY 3739 +mx28_plato MACH_MX28_PLATO MX28_PLATO 3740 +kacom2 MACH_KACOM2 KACOM2 3741 +slco MACH_SLCO SLCO 3742 +imx51pico MACH_IMX51PICO IMX51PICO 3743 +glink1 MACH_GLINK1 GLINK1 3744 +diamond MACH_DIAMOND DIAMOND 3745 +d9000 MACH_D9000 D9000 3746 +w5300e01 MACH_W5300E01 W5300E01 3747 +im6000 MACH_IM6000 IM6000 3748 +mx51_fred51 MACH_MX51_FRED51 MX51_FRED51 3749 +stm32f2 MACH_STM32F2 STM32F2 3750 +ville MACH_VILLE VILLE 3751 +ptip_murnau MACH_PTIP_MURNAU PTIP_MURNAU 3752 +ptip_classic MACH_PTIP_CLASSIC PTIP_CLASSIC 3753 +mx53grb MACH_MX53GRB MX53GRB 3754 +gagarin MACH_GAGARIN GAGARIN 3755 +nas2big MACH_NAS2BIG NAS2BIG 3757 +superfemto MACH_SUPERFEMTO SUPERFEMTO 3758 +teufel MACH_TEUFEL TEUFEL 3759 +dinara MACH_DINARA DINARA 3760 +vanquish MACH_VANQUISH VANQUISH 3761 +zipabox1 MACH_ZIPABOX1 ZIPABOX1 3762 +u9540 MACH_U9540 U9540 3763 +jet MACH_JET JET 3764 smdk4412 MACH_SMDK4412 SMDK4412 3765 +elite MACH_ELITE ELITE 3766 +spear320_hmi MACH_SPEAR320_HMI SPEAR320_HMI 3767 +ontario MACH_ONTARIO ONTARIO 3768 +mx6q_sabrelite MACH_MX6Q_SABRELITE MX6Q_SABRELITE 3769 +vc200 MACH_VC200 VC200 3770 +msm7625a_ffa MACH_MSM7625A_FFA MSM7625A_FFA 3771 +msm7625a_surf MACH_MSM7625A_SURF MSM7625A_SURF 3772 +benthossbp MACH_BENTHOSSBP BENTHOSSBP 3773 +smdk5210 MACH_SMDK5210 SMDK5210 3774 +empq2300 MACH_EMPQ2300 EMPQ2300 3775 +minipos MACH_MINIPOS MINIPOS 3776 +omap5_sevm MACH_OMAP5_SEVM OMAP5_SEVM 3777 +shelter MACH_SHELTER SHELTER 3778 +omap3_devkit8500 MACH_OMAP3_DEVKIT8500 OMAP3_DEVKIT8500 3779 +edgetd MACH_EDGETD EDGETD 3780 +copperyard MACH_COPPERYARD COPPERYARD 3781 +edge MACH_EDGE EDGE 3782 +edge_u MACH_EDGE_U EDGE_U 3783 +edge_td MACH_EDGE_TD EDGE_TD 3784 +wdss MACH_WDSS WDSS 3785 +dl_pb25 MACH_DL_PB25 DL_PB25 3786 +dss11 MACH_DSS11 DSS11 3787 +cpa MACH_CPA CPA 3788 +aptp2000 MACH_APTP2000 APTP2000 3789 +marzen MACH_MARZEN MARZEN 3790 +st_turbine MACH_ST_TURBINE ST_TURBINE 3791 +gtl_it3300 MACH_GTL_IT3300 GTL_IT3300 3792 +mx6_mule MACH_MX6_MULE MX6_MULE 3793 +v7pxa_dt MACH_V7PXA_DT V7PXA_DT 3794 +v7mmp_dt MACH_V7MMP_DT V7MMP_DT 3795 +dragon7 MACH_DRAGON7 DRAGON7 3796 +krome MACH_KROME KROME 3797 +oratisdante MACH_ORATISDANTE ORATISDANTE 3798 +fathom MACH_FATHOM FATHOM 3799 +dns325 MACH_DNS325 DNS325 3800 +sarnen MACH_SARNEN SARNEN 3801 +ubisys_g1 MACH_UBISYS_G1 UBISYS_G1 3802 +mx53_pf1 MACH_MX53_PF1 MX53_PF1 3803 +asanti MACH_ASANTI ASANTI 3804 +volta MACH_VOLTA VOLTA 3805 +knight MACH_KNIGHT KNIGHT 3807 +beaglebone MACH_BEAGLEBONE BEAGLEBONE 3808 +becker MACH_BECKER BECKER 3809 +fc360 MACH_FC360 FC360 3810 +pmi2_xls MACH_PMI2_XLS PMI2_XLS 3811 +taranto MACH_TARANTO TARANTO 3812 +plutux MACH_PLUTUX PLUTUX 3813 +ipmp_medcom MACH_IPMP_MEDCOM IPMP_MEDCOM 3814 +absolut MACH_ABSOLUT ABSOLUT 3815 +awpb3 MACH_AWPB3 AWPB3 3816 +nfp32xx_dt MACH_NFP32XX_DT NFP32XX_DT 3817 +dl_pb53 MACH_DL_PB53 DL_PB53 3818 +acu_ii MACH_ACU_II ACU_II 3819 +avalon MACH_AVALON AVALON 3820 +sphinx MACH_SPHINX SPHINX 3821 +titan_t MACH_TITAN_T TITAN_T 3822 +harvest_boris MACH_HARVEST_BORIS HARVEST_BORIS 3823 +mach_msm7x30_m3s MACH_MACH_MSM7X30_M3S MACH_MSM7X30_M3S 3824 +smdk5250 MACH_SMDK5250 SMDK5250 3825 +imxt_lite MACH_IMXT_LITE IMXT_LITE 3826 +imxt_std MACH_IMXT_STD IMXT_STD 3827 +imxt_log MACH_IMXT_LOG IMXT_LOG 3828 +imxt_nav MACH_IMXT_NAV IMXT_NAV 3829 +imxt_full MACH_IMXT_FULL IMXT_FULL 3830 +ag09015 MACH_AG09015 AG09015 3831 +am3517_mt_ventoux MACH_AM3517_MT_VENTOUX AM3517_MT_VENTOUX 3832 +dp1arm9 MACH_DP1ARM9 DP1ARM9 3833 +picasso_m MACH_PICASSO_M PICASSO_M 3834 +video_gadget MACH_VIDEO_GADGET VIDEO_GADGET 3835 +mtt_om3x MACH_MTT_OM3X MTT_OM3X 3836 +mx6q_arm2 MACH_MX6Q_ARM2 MX6Q_ARM2 3837 +picosam9g45 MACH_PICOSAM9G45 PICOSAM9G45 3838 +vpm_dm365 MACH_VPM_DM365 VPM_DM365 3839 +bonfire MACH_BONFIRE BONFIRE 3840 +mt2p2d MACH_MT2P2D MT2P2D 3841 +sigpda01 MACH_SIGPDA01 SIGPDA01 3842 +cn27 MACH_CN27 CN27 3843 +mx25_cwtap MACH_MX25_CWTAP MX25_CWTAP 3844 +apf28 MACH_APF28 APF28 3845 +pelco_maxwell MACH_PELCO_MAXWELL PELCO_MAXWELL 3846 +ge_phoenix MACH_GE_PHOENIX GE_PHOENIX 3847 +empc_a500 MACH_EMPC_A500 EMPC_A500 3848 +ims_arm9 MACH_IMS_ARM9 IMS_ARM9 3849 +mini2416 MACH_MINI2416 MINI2416 3850 +mini2450 MACH_MINI2450 MINI2450 3851 +mini310 MACH_MINI310 MINI310 3852 +spear_hurricane MACH_SPEAR_HURRICANE SPEAR_HURRICANE 3853 +mt7208 MACH_MT7208 MT7208 3854 +lpc178x MACH_LPC178X LPC178X 3855 +farleys MACH_FARLEYS FARLEYS 3856 +efm32gg_dk3750 MACH_EFM32GG_DK3750 EFM32GG_DK3750 3857 +zeus_board MACH_ZEUS_BOARD ZEUS_BOARD 3858 +cc51 MACH_CC51 CC51 3859 +fxi_c210 MACH_FXI_C210 FXI_C210 3860 +msm8627_cdp MACH_MSM8627_CDP MSM8627_CDP 3861 +msm8627_mtp MACH_MSM8627_MTP MSM8627_MTP 3862 +armadillo800eva MACH_ARMADILLO800EVA ARMADILLO800EVA 3863 +primou MACH_PRIMOU PRIMOU 3864 +primoc MACH_PRIMOC PRIMOC 3865 +primoct MACH_PRIMOCT PRIMOCT 3866 +a9500 MACH_A9500 A9500 3867 +pluto MACH_PLUTO PLUTO 3869 +acfx100 MACH_ACFX100 ACFX100 3870 +msm8625_rumi3 MACH_MSM8625_RUMI3 MSM8625_RUMI3 3871 +valente MACH_VALENTE VALENTE 3872 +crfs_rfeye MACH_CRFS_RFEYE CRFS_RFEYE 3873 +rfeye MACH_RFEYE RFEYE 3874 +phidget_sbc3 MACH_PHIDGET_SBC3 PHIDGET_SBC3 3875 +tcw_mika MACH_TCW_MIKA TCW_MIKA 3876 +imx28_egf MACH_IMX28_EGF IMX28_EGF 3877 +valente_wx MACH_VALENTE_WX VALENTE_WX 3878 +huangshans MACH_HUANGSHANS HUANGSHANS 3879 +bosphorus1 MACH_BOSPHORUS1 BOSPHORUS1 3880 +prima MACH_PRIMA PRIMA 3881 +evita_ulk MACH_EVITA_ULK EVITA_ULK 3884 +merisc600 MACH_MERISC600 MERISC600 3885 +dolak MACH_DOLAK DOLAK 3886 +sbc53 MACH_SBC53 SBC53 3887 +elite_ulk MACH_ELITE_ULK ELITE_ULK 3888 +pov2 MACH_POV2 POV2 3889 +ipod_touch_2g MACH_IPOD_TOUCH_2G IPOD_TOUCH_2G 3890 +da850_pqab MACH_DA850_PQAB DA850_PQAB 3891 diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index 1f17bde52cd4..7c756fb189f7 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -109,7 +109,7 @@ struct eth_addr { u8 addr[6]; }; static struct eth_addr __initdata hw_addr[2]; -static struct eth_platform_data __initdata eth_data[2]; +static struct macb_platform_data __initdata eth_data[2]; static struct spi_board_info spi0_board_info[] __initdata = { { diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index 4643ff5107c9..c56ddac85d61 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -105,7 +105,7 @@ struct eth_addr { }; static struct eth_addr __initdata hw_addr[2]; -static struct eth_platform_data __initdata eth_data[2] = { +static struct macb_platform_data __initdata eth_data[2] = { { /* * The MDIO pullups on STK1000 are a bit too weak for diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c index 86fab77a5a00..27bd6fbe21cb 100644 --- a/arch/avr32/boards/favr-32/setup.c +++ b/arch/avr32/boards/favr-32/setup.c @@ -50,7 +50,7 @@ struct eth_addr { u8 addr[6]; }; static struct eth_addr __initdata hw_addr[1]; -static struct eth_platform_data __initdata eth_data[1] = { +static struct macb_platform_data __initdata eth_data[1] = { { .phy_mask = ~(1U << 1), }, diff --git a/arch/avr32/boards/hammerhead/setup.c b/arch/avr32/boards/hammerhead/setup.c index da14fbdd4e8e..9d1efd1cd425 100644 --- a/arch/avr32/boards/hammerhead/setup.c +++ b/arch/avr32/boards/hammerhead/setup.c @@ -102,7 +102,7 @@ struct eth_addr { }; static struct eth_addr __initdata hw_addr[1]; -static struct eth_platform_data __initdata eth_data[1]; +static struct macb_platform_data __initdata eth_data[1]; /* * The next two functions should go away as the boot loader is diff --git a/arch/avr32/boards/merisc/merisc_sysfs.c b/arch/avr32/boards/merisc/merisc_sysfs.c index df431fdba9ad..5a252318f4bd 100644 --- a/arch/avr32/boards/merisc/merisc_sysfs.c +++ b/arch/avr32/boards/merisc/merisc_sysfs.c @@ -13,7 +13,6 @@ #include <linux/list.h> #include <linux/spinlock.h> #include <linux/device.h> -#include <linux/sysdev.h> #include <linux/timer.h> #include <linux/err.h> #include <linux/ctype.h> diff --git a/arch/avr32/boards/merisc/setup.c b/arch/avr32/boards/merisc/setup.c index e61bc948f959..ed137e335796 100644 --- a/arch/avr32/boards/merisc/setup.c +++ b/arch/avr32/boards/merisc/setup.c @@ -52,7 +52,7 @@ struct eth_addr { }; static struct eth_addr __initdata hw_addr[2]; -static struct eth_platform_data __initdata eth_data[2]; +static struct macb_platform_data __initdata eth_data[2]; static int ads7846_get_pendown_state_PB26(void) { diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c index c4da5cba2dbf..05358aa5ef7d 100644 --- a/arch/avr32/boards/mimc200/setup.c +++ b/arch/avr32/boards/mimc200/setup.c @@ -86,7 +86,7 @@ struct eth_addr { u8 addr[6]; }; static struct eth_addr __initdata hw_addr[2]; -static struct eth_platform_data __initdata eth_data[2]; +static struct macb_platform_data __initdata eth_data[2]; static struct spi_eeprom eeprom_25lc010 = { .name = "25lc010", diff --git a/arch/avr32/include/asm/ipcbuf.h b/arch/avr32/include/asm/ipcbuf.h index 1552c9698f5e..84c7e51cb6d0 100644 --- a/arch/avr32/include/asm/ipcbuf.h +++ b/arch/avr32/include/asm/ipcbuf.h @@ -1,29 +1 @@ -#ifndef __ASM_AVR32_IPCBUF_H -#define __ASM_AVR32_IPCBUF_H - -/* -* The user_ipc_perm structure for AVR32 architecture. -* Note extra padding because this structure is passed back and forth -* between kernel and user space. -* -* Pad space is left for: -* - 32-bit mode_t and seq -* - 2 miscellaneous 32-bit values -*/ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __ASM_AVR32_IPCBUF_H */ +#include <asm-generic/ipcbuf.h> diff --git a/arch/avr32/include/asm/socket.h b/arch/avr32/include/asm/socket.h index c8d1fae49476..247b88c760be 100644 --- a/arch/avr32/include/asm/socket.h +++ b/arch/avr32/include/asm/socket.h @@ -62,4 +62,7 @@ #define SO_RXQ_OVFL 40 +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS + #endif /* __ASM_AVR32_SOCKET_H */ diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h index 7a9c03dcb0b6..e5deda4691db 100644 --- a/arch/avr32/include/asm/thread_info.h +++ b/arch/avr32/include/asm/thread_info.h @@ -85,7 +85,6 @@ static inline struct thread_info *current_thread_info(void) #define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */ #define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */ #define TIF_NOTIFY_RESUME 9 /* callback before returning to user */ -#define TIF_FREEZE 29 #define TIF_DEBUG 30 /* debugging enabled */ #define TIF_USERSPACE 31 /* true if FS sets userspace */ @@ -98,7 +97,6 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) -#define _TIF_FREEZE (1 << TIF_FREEZE) /* Note: The masks below must never span more than 16 bits! */ diff --git a/arch/avr32/include/asm/types.h b/arch/avr32/include/asm/types.h index 72667a3b1af7..9bb2d8b2e6ca 100644 --- a/arch/avr32/include/asm/types.h +++ b/arch/avr32/include/asm/types.h @@ -10,12 +10,6 @@ #include <asm-generic/int-ll64.h> -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - /* * These aren't exported outside the kernel to avoid name space clashes */ diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c index e84faffbbeca..2233be71e2e8 100644 --- a/arch/avr32/kernel/cpu.c +++ b/arch/avr32/kernel/cpu.c @@ -6,7 +6,7 @@ * published by the Free Software Foundation. */ #include <linux/init.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/seq_file.h> #include <linux/cpu.h> #include <linux/module.h> @@ -26,16 +26,16 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices); * XXX: If/when a SMP-capable implementation of AVR32 will ever be * made, we must make sure that the code executes on the correct CPU. */ -static ssize_t show_pc0event(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t show_pc0event(struct device *dev, + struct device_attribute *attr, char *buf) { unsigned long pccr; pccr = sysreg_read(PCCR); return sprintf(buf, "0x%lx\n", (pccr >> 12) & 0x3f); } -static ssize_t store_pc0event(struct sys_device *dev, - struct sysdev_attribute *attr, const char *buf, +static ssize_t store_pc0event(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { unsigned long val; @@ -48,16 +48,16 @@ static ssize_t store_pc0event(struct sys_device *dev, sysreg_write(PCCR, val); return count; } -static ssize_t show_pc0count(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t show_pc0count(struct device *dev, + struct device_attribute *attr, char *buf) { unsigned long pcnt0; pcnt0 = sysreg_read(PCNT0); return sprintf(buf, "%lu\n", pcnt0); } -static ssize_t store_pc0count(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t store_pc0count(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { unsigned long val; @@ -71,16 +71,16 @@ static ssize_t store_pc0count(struct sys_device *dev, return count; } -static ssize_t show_pc1event(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t show_pc1event(struct device *dev, + struct device_attribute *attr, char *buf) { unsigned long pccr; pccr = sysreg_read(PCCR); return sprintf(buf, "0x%lx\n", (pccr >> 18) & 0x3f); } -static ssize_t store_pc1event(struct sys_device *dev, - struct sysdev_attribute *attr, const char *buf, +static ssize_t store_pc1event(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { unsigned long val; @@ -93,16 +93,16 @@ static ssize_t store_pc1event(struct sys_device *dev, sysreg_write(PCCR, val); return count; } -static ssize_t show_pc1count(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t show_pc1count(struct device *dev, + struct device_attribute *attr, char *buf) { unsigned long pcnt1; pcnt1 = sysreg_read(PCNT1); return sprintf(buf, "%lu\n", pcnt1); } -static ssize_t store_pc1count(struct sys_device *dev, - struct sysdev_attribute *attr, const char *buf, +static ssize_t store_pc1count(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { unsigned long val; @@ -116,16 +116,16 @@ static ssize_t store_pc1count(struct sys_device *dev, return count; } -static ssize_t show_pccycles(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t show_pccycles(struct device *dev, + struct device_attribute *attr, char *buf) { unsigned long pccnt; pccnt = sysreg_read(PCCNT); return sprintf(buf, "%lu\n", pccnt); } -static ssize_t store_pccycles(struct sys_device *dev, - struct sysdev_attribute *attr, const char *buf, +static ssize_t store_pccycles(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { unsigned long val; @@ -139,16 +139,16 @@ static ssize_t store_pccycles(struct sys_device *dev, return count; } -static ssize_t show_pcenable(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t show_pcenable(struct device *dev, + struct device_attribute *attr, char *buf) { unsigned long pccr; pccr = sysreg_read(PCCR); return sprintf(buf, "%c\n", (pccr & 1)?'1':'0'); } -static ssize_t store_pcenable(struct sys_device *dev, - struct sysdev_attribute *attr, const char *buf, +static ssize_t store_pcenable(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { unsigned long pccr, val; @@ -167,12 +167,12 @@ static ssize_t store_pcenable(struct sys_device *dev, return count; } -static SYSDEV_ATTR(pc0event, 0600, show_pc0event, store_pc0event); -static SYSDEV_ATTR(pc0count, 0600, show_pc0count, store_pc0count); -static SYSDEV_ATTR(pc1event, 0600, show_pc1event, store_pc1event); -static SYSDEV_ATTR(pc1count, 0600, show_pc1count, store_pc1count); -static SYSDEV_ATTR(pccycles, 0600, show_pccycles, store_pccycles); -static SYSDEV_ATTR(pcenable, 0600, show_pcenable, store_pcenable); +static DEVICE_ATTR(pc0event, 0600, show_pc0event, store_pc0event); +static DEVICE_ATTR(pc0count, 0600, show_pc0count, store_pc0count); +static DEVICE_ATTR(pc1event, 0600, show_pc1event, store_pc1event); +static DEVICE_ATTR(pc1count, 0600, show_pc1count, store_pc1count); +static DEVICE_ATTR(pccycles, 0600, show_pccycles, store_pccycles); +static DEVICE_ATTR(pcenable, 0600, show_pcenable, store_pcenable); #endif /* CONFIG_PERFORMANCE_COUNTERS */ @@ -186,12 +186,12 @@ static int __init topology_init(void) register_cpu(c, cpu); #ifdef CONFIG_PERFORMANCE_COUNTERS - sysdev_create_file(&c->sysdev, &attr_pc0event); - sysdev_create_file(&c->sysdev, &attr_pc0count); - sysdev_create_file(&c->sysdev, &attr_pc1event); - sysdev_create_file(&c->sysdev, &attr_pc1count); - sysdev_create_file(&c->sysdev, &attr_pccycles); - sysdev_create_file(&c->sysdev, &attr_pcenable); + device_create_file(&c->dev, &dev_attr_pc0event); + device_create_file(&c->dev, &dev_attr_pc0count); + device_create_file(&c->dev, &dev_attr_pc1event); + device_create_file(&c->dev, &dev_attr_pc1count); + device_create_file(&c->dev, &dev_attr_pccycles); + device_create_file(&c->dev, &dev_attr_pcenable); #endif } diff --git a/arch/avr32/kernel/irq.c b/arch/avr32/kernel/irq.c index bc3aa18293df..900e49b2258b 100644 --- a/arch/avr32/kernel/irq.c +++ b/arch/avr32/kernel/irq.c @@ -14,7 +14,7 @@ #include <linux/kernel_stat.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> -#include <linux/sysdev.h> +#include <linux/device.h> /* May be overridden by platform code */ int __weak nmi_enable(void) diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c index ef5a2a08fcca..ea3395750324 100644 --- a/arch/avr32/kernel/process.c +++ b/arch/avr32/kernel/process.c @@ -34,10 +34,12 @@ void cpu_idle(void) { /* endless idle loop with no priority at all */ while (1) { - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); + rcu_idle_enter(); while (!need_resched()) cpu_idle_sleep(); - tick_nohz_restart_sched_tick(); + rcu_idle_exit(); + tick_nohz_idle_exit(); preempt_enable_no_resched(); schedule(); preempt_disable(); diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 7fbf0dcb9afe..402a7bb72669 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1067,7 +1067,7 @@ void __init at32_setup_serial_console(unsigned int usart_id) * -------------------------------------------------------------------- */ #ifdef CONFIG_CPU_AT32AP7000 -static struct eth_platform_data macb0_data; +static struct macb_platform_data macb0_data; static struct resource macb0_resource[] = { PBMEM(0xfff01800), IRQ(25), @@ -1076,7 +1076,7 @@ DEFINE_DEV_DATA(macb, 0); DEV_CLK(hclk, macb0, hsb, 8); DEV_CLK(pclk, macb0, pbb, 6); -static struct eth_platform_data macb1_data; +static struct macb_platform_data macb1_data; static struct resource macb1_resource[] = { PBMEM(0xfff01c00), IRQ(26), @@ -1086,7 +1086,7 @@ DEV_CLK(hclk, macb1, hsb, 9); DEV_CLK(pclk, macb1, pbb, 7); struct platform_device *__init -at32_add_device_eth(unsigned int id, struct eth_platform_data *data) +at32_add_device_eth(unsigned int id, struct macb_platform_data *data) { struct platform_device *pdev; u32 pin_mask; @@ -1163,7 +1163,7 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data) return NULL; } - memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data)); + memcpy(pdev->dev.platform_data, data, sizeof(struct macb_platform_data)); platform_device_register(pdev); return pdev; diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index 5d7ffca7d69f..67b111ce332d 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -6,6 +6,7 @@ #include <linux/types.h> #include <linux/serial.h> +#include <linux/platform_data/macb.h> #define GPIO_PIN_NONE (-1) @@ -42,12 +43,8 @@ struct atmel_uart_data { void at32_map_usart(unsigned int hw_id, unsigned int line, int flags); struct platform_device *at32_add_device_usart(unsigned int id); -struct eth_platform_data { - u32 phy_mask; - u8 is_rmii; -}; struct platform_device * -at32_add_device_eth(unsigned int id, struct eth_platform_data *data); +at32_add_device_eth(unsigned int id, struct macb_platform_data *data); struct spi_board_info; struct platform_device * diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig index 5edcb58d6f73..0b7039cf07ff 100644 --- a/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -80,7 +80,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_BLACKFIN_TWI=y CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig index 2e549572d4f5..5553205d7cbe 100644 --- a/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -97,7 +97,7 @@ CONFIG_I2C_CHARDEV=m CONFIG_I2C_BLACKFIN_TWI=y CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_WATCHDOG=y diff --git a/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig b/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig index ad0881ba30af..d95658fc3127 100644 --- a/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig +++ b/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig @@ -68,7 +68,7 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_BLACKFIN_TWI=y CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=400 CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set diff --git a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig index 8465b3e6b862..498f64a87050 100644 --- a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig @@ -105,7 +105,7 @@ CONFIG_I2C_CHARDEV=m CONFIG_I2C_BLACKFIN_TWI=y CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index 5e7321b26040..72e0317565ef 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -99,7 +99,7 @@ CONFIG_I2C_CHARDEV=m CONFIG_I2C_BLACKFIN_TWI=y CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index a7eb54bf3089..2f075e0b2624 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -81,7 +81,7 @@ CONFIG_SERIAL_BFIN_CONSOLE=y # CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index b90d3792ed52..ab38a82597b2 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -84,7 +84,7 @@ CONFIG_I2C=m CONFIG_I2C_CHARDEV=m CONFIG_I2C_GPIO=m CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index 005362537a7b..5c802d6bbbc0 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -94,7 +94,7 @@ CONFIG_I2C_CHARDEV=m CONFIG_I2C_BLACKFIN_TWI=m CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig index 580bf4296a14..972aa6263ad0 100644 --- a/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -101,7 +101,7 @@ CONFIG_I2C=m CONFIG_I2C_BLACKFIN_TWI=m CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index 0e6d841b5d01..7a1e3bf2b04f 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -113,7 +113,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_BLACKFIN_TWI=y CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig index 77a27e31d6d1..0fdc4ecaa531 100644 --- a/arch/blackfin/configs/BF561-ACVILON_defconfig +++ b/arch/blackfin/configs/BF561-ACVILON_defconfig @@ -85,7 +85,7 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_PCA_PLATFORM=y CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_SPI_SPIDEV=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y diff --git a/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig b/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig index f5ed34e12e0c..78adbbf39826 100644 --- a/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig @@ -84,7 +84,7 @@ CONFIG_SERIAL_BFIN_CONSOLE=y # CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index d7ff2aee3fbc..d3cd0f561c84 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -86,7 +86,7 @@ CONFIG_SERIAL_BFIN_CONSOLE=y # CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig index 85014319672c..7b982d0502ad 100644 --- a/arch/blackfin/configs/BlackStamp_defconfig +++ b/arch/blackfin/configs/BlackStamp_defconfig @@ -80,7 +80,7 @@ CONFIG_I2C=m CONFIG_I2C_CHARDEV=m CONFIG_I2C_GPIO=m CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_SPI_SPIDEV=m # CONFIG_HWMON is not set CONFIG_WATCHDOG=y diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index dbf750cd2db8..c280a50e7943 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -88,7 +88,7 @@ CONFIG_I2C_CHARDEV=m CONFIG_I2C_BLACKFIN_TWI=m CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_WATCHDOG=y diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig index 07ffbdae34ee..c940a1e3ab36 100644 --- a/arch/blackfin/configs/CM-BF533_defconfig +++ b/arch/blackfin/configs/CM-BF533_defconfig @@ -57,7 +57,7 @@ CONFIG_SERIAL_BFIN_CONSOLE=y # CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y # CONFIG_HWMON is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig index 707cbf8a2590..2e47df77490f 100644 --- a/arch/blackfin/configs/CM-BF537E_defconfig +++ b/arch/blackfin/configs/CM-BF537E_defconfig @@ -78,7 +78,7 @@ CONFIG_SERIAL_BFIN_UART1=y # CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_USB_GADGET=m diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig index 4596935eadac..6da629ffc2f1 100644 --- a/arch/blackfin/configs/CM-BF537U_defconfig +++ b/arch/blackfin/configs/CM-BF537U_defconfig @@ -72,7 +72,7 @@ CONFIG_SERIAL_BFIN_UART1=y # CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_USB_GADGET=y diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index 9f1d08401fca..349922be01f3 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -89,7 +89,7 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_BLACKFIN_TWI=y CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig index 6c7b21585a43..0456deaa2d6f 100644 --- a/arch/blackfin/configs/CM-BF561_defconfig +++ b/arch/blackfin/configs/CM-BF561_defconfig @@ -78,7 +78,7 @@ CONFIG_SERIAL_BFIN_CONSOLE=y # CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_USB_GADGET=m diff --git a/arch/blackfin/configs/DNP5370_defconfig b/arch/blackfin/configs/DNP5370_defconfig index b192acfae386..89162d0fff9e 100644 --- a/arch/blackfin/configs/DNP5370_defconfig +++ b/arch/blackfin/configs/DNP5370_defconfig @@ -78,7 +78,7 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_BLACKFIN_TWI=y CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_SPI_SPIDEV=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig index 06e9f497faed..a26436bf50ff 100644 --- a/arch/blackfin/configs/H8606_defconfig +++ b/arch/blackfin/configs/H8606_defconfig @@ -68,7 +68,7 @@ CONFIG_SERIAL_BFIN_CONSOLE=y # CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_SPI_SPIDEV=y CONFIG_WATCHDOG=y CONFIG_SOUND=m diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig index 5e797cf72043..647991514ac9 100644 --- a/arch/blackfin/configs/IP0X_defconfig +++ b/arch/blackfin/configs/IP0X_defconfig @@ -70,7 +70,7 @@ CONFIG_SERIAL_BFIN_CONSOLE=y # CONFIG_LEGACY_PTYS is not set CONFIG_HW_RANDOM=y CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_USB=y diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index a566a2fe6b9b..8fd9b446d658 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -84,7 +84,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_BLACKFIN_TWI=y CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_BACKLIGHT_LCD_SUPPORT=y diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig index 12e66cd7cdaa..0520c160230d 100644 --- a/arch/blackfin/configs/SRV1_defconfig +++ b/arch/blackfin/configs/SRV1_defconfig @@ -71,7 +71,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_BLACKFIN_TWI=y CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_HWMON=m CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y diff --git a/arch/blackfin/configs/TCM-BF518_defconfig b/arch/blackfin/configs/TCM-BF518_defconfig index d496ae9a39b0..e4ed865b885e 100644 --- a/arch/blackfin/configs/TCM-BF518_defconfig +++ b/arch/blackfin/configs/TCM-BF518_defconfig @@ -92,7 +92,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_BLACKFIN_TWI=y CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig index 65f642167a50..c1f45f15295c 100644 --- a/arch/blackfin/configs/TCM-BF537_defconfig +++ b/arch/blackfin/configs/TCM-BF537_defconfig @@ -70,7 +70,7 @@ CONFIG_SERIAL_BFIN_UART1=y # CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_SPI=y -CONFIG_SPI_BFIN=y +CONFIG_SPI_BFIN5XX=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h index ecacdf34768b..68bcc3d119b6 100644 --- a/arch/blackfin/include/asm/bfin_serial.h +++ b/arch/blackfin/include/asm/bfin_serial.h @@ -51,9 +51,6 @@ struct bfin_serial_port { #elif ANOMALY_05000363 unsigned int anomaly_threshold; #endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - int scts; -#endif #if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) int cts_pin; diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h index 05043786da21..e349631c8299 100644 --- a/arch/blackfin/include/asm/cpu.h +++ b/arch/blackfin/include/asm/cpu.h @@ -14,6 +14,9 @@ struct blackfin_cpudata { struct cpu cpu; unsigned int imemctl; unsigned int dmemctl; +#ifdef CONFIG_SMP + struct task_struct *idle; +#endif }; DECLARE_PER_CPU(struct blackfin_cpudata, cpu_data); diff --git a/arch/blackfin/include/asm/pci.h b/arch/blackfin/include/asm/pci.h index 99cae2e3bac7..74352c4597d9 100644 --- a/arch/blackfin/include/asm/pci.h +++ b/arch/blackfin/include/asm/pci.h @@ -10,10 +10,6 @@ #define PCIBIOS_MIN_IO 0x00001000 #define PCIBIOS_MIN_MEM 0x10000000 -static inline void pcibios_set_master(struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} static inline void pcibios_penalize_isa_irq(int irq) { /* We don't do dynamic PCI IRQ allocation */ diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h index af6c0aa79bae..dc3d144b4bb5 100644 --- a/arch/blackfin/include/asm/smp.h +++ b/arch/blackfin/include/asm/smp.h @@ -37,7 +37,7 @@ extern unsigned long dcache_invld_count[NR_CPUS]; #endif void smp_icache_flush_range_others(unsigned long start, - unsigned long end); + unsigned long end); #ifdef CONFIG_HOTPLUG_CPU void coreb_die(void); void cpu_die(void); @@ -46,4 +46,7 @@ int __cpu_disable(void); int __cpu_die(unsigned int cpu); #endif +void smp_timer_broadcast(const struct cpumask *mask); + + #endif /* !__ASM_BLACKFIN_SMP_H */ diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h index 02560fd8a121..53ad10005ae3 100644 --- a/arch/blackfin/include/asm/thread_info.h +++ b/arch/blackfin/include/asm/thread_info.h @@ -100,7 +100,6 @@ static inline struct thread_info *current_thread_info(void) TIF_NEED_RESCHED */ #define TIF_MEMDIE 4 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ -#define TIF_FREEZE 6 /* is freezing for suspend */ #define TIF_IRQ_SYNC 7 /* sync pipeline stage */ #define TIF_NOTIFY_RESUME 8 /* callback before returning to user */ #define TIF_SINGLESTEP 9 @@ -111,7 +110,6 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) #define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) -#define _TIF_FREEZE (1<<TIF_FREEZE) #define _TIF_IRQ_SYNC (1<<TIF_IRQ_SYNC) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) #define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP) diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 6a80a9e9fc4a..8dd0416673cb 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -88,10 +88,12 @@ void cpu_idle(void) #endif if (!idle) idle = default_idle; - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); + rcu_idle_enter(); while (!need_resched()) idle(); - tick_nohz_restart_sched_tick(); + rcu_idle_exit(); + tick_nohz_idle_exit(); preempt_enable_no_resched(); schedule(); preempt_disable(); diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index dfa2525a442d..d6102c86d037 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -828,10 +828,18 @@ static inline int __init get_mem_size(void) u32 ddrctl = bfin_read_EBIU_DDRCTL1(); int ret = 0; switch (ddrctl & 0xc0000) { - case DEVSZ_64: ret = 64 / 8; - case DEVSZ_128: ret = 128 / 8; - case DEVSZ_256: ret = 256 / 8; - case DEVSZ_512: ret = 512 / 8; + case DEVSZ_64: + ret = 64 / 8; + break; + case DEVSZ_128: + ret = 128 / 8; + break; + case DEVSZ_256: + ret = 256 / 8; + break; + case DEVSZ_512: + ret = 512 / 8; + break; } switch (ddrctl & 0x30000) { case DEVWD_4: ret *= 2; diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c index 1bcf3a3c57d8..d98f2d69b0c4 100644 --- a/arch/blackfin/kernel/time-ts.c +++ b/arch/blackfin/kernel/time-ts.c @@ -219,7 +219,7 @@ static void __init bfin_gptmr0_clockevent_init(struct clock_event_device *evt) #if defined(CONFIG_TICKSOURCE_CORETMR) /* per-cpu local core timer */ -static DEFINE_PER_CPU(struct clock_event_device, coretmr_events); +DEFINE_PER_CPU(struct clock_event_device, coretmr_events); static int bfin_coretmr_set_next_event(unsigned long cycles, struct clock_event_device *evt) @@ -281,6 +281,7 @@ void bfin_coretmr_init(void) #ifdef CONFIG_CORE_TIMER_IRQ_L1 __attribute__((l1_text)) #endif + irqreturn_t bfin_coretmr_interrupt(int irq, void *dev_id) { int cpu = smp_processor_id(); @@ -306,6 +307,11 @@ void bfin_coretmr_clockevent_init(void) unsigned int cpu = smp_processor_id(); struct clock_event_device *evt = &per_cpu(coretmr_events, cpu); +#ifdef CONFIG_SMP + evt->broadcast = smp_timer_broadcast; +#endif + + evt->name = "bfin_core_timer"; evt->rating = 350; evt->irq = -1; diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index d1c0c0cff3ef..a2d96d31bbf1 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -61,7 +61,7 @@ static struct physmap_flash_data ezbrd_flash_data = { static struct resource ezbrd_flash_resource = { .start = 0x20000000, -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) .end = 0x202fffff, #else .end = 0x203fffff, @@ -122,6 +122,8 @@ static struct bfin_mii_bus_platform_data bfin_mii_bus_data = { #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) .phy_mask = 0xfff7, /* Only probe the port phy connect to the on chip MAC */ #endif + .vlan1_mask = 1, + .vlan2_mask = 2, }; static struct platform_device bfin_mii_bus = { @@ -292,7 +294,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }; /* SPI controller data */ -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* SPI (0) */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 6, @@ -715,7 +717,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, &bfin_spi1_device, #endif @@ -777,7 +779,7 @@ static int __init ezbrd_init(void) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); /* setup BF518-EZBRD GPIO pin PG11 to AMS2, PG15 to AMS3. */ peripheral_request(P_AMS2, "ParaFlash"); -#if !defined(CONFIG_SPI_BFIN) && !defined(CONFIG_SPI_BFIN_MODULE) +#if !defined(CONFIG_SPI_BFIN5XX) && !defined(CONFIG_SPI_BFIN5XX_MODULE) peripheral_request(P_AMS3, "ParaFlash"); #endif return 0; diff --git a/arch/blackfin/mach-bf518/boards/tcm-bf518.c b/arch/blackfin/mach-bf518/boards/tcm-bf518.c index 5470bf89e52e..f271310f739d 100644 --- a/arch/blackfin/mach-bf518/boards/tcm-bf518.c +++ b/arch/blackfin/mach-bf518/boards/tcm-bf518.c @@ -228,7 +228,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }; /* SPI controller data */ -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* SPI (0) */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 6, @@ -635,7 +635,7 @@ static struct platform_device *tcm_devices[] __initdata = { &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, &bfin_spi1_device, #endif diff --git a/arch/blackfin/mach-bf527/boards/ad7160eval.c b/arch/blackfin/mach-bf527/boards/ad7160eval.c index 5bc6938157ad..c8d5d2b7c732 100644 --- a/arch/blackfin/mach-bf527/boards/ad7160eval.c +++ b/arch/blackfin/mach-bf527/boards/ad7160eval.c @@ -334,7 +334,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, @@ -744,7 +744,7 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index cd289698b4dd..7330607856e9 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -444,7 +444,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -893,7 +893,7 @@ static struct platform_device *cmbf527_devices[] __initdata = { &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 9f792eafd1cc..db3ecfce8306 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -371,7 +371,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -776,7 +776,7 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 3ecafff5d2ef..dfdd8e6bac72 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -664,7 +664,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -1189,7 +1189,7 @@ static struct platform_device *stamp_devices[] __initdata = { &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c index 3a92c4318d2d..360e97fc5293 100644 --- a/arch/blackfin/mach-bf527/boards/tll6527m.c +++ b/arch/blackfin/mach-bf527/boards/tll6527m.c @@ -448,7 +448,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = EXP_GPIO_SPISEL_BASE + 8 + MAX_CTRL_CS, @@ -831,7 +831,7 @@ static struct platform_device *tll6527m_devices[] __initdata = { &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 47cadd316e76..6cb7b3ed9b3d 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -125,7 +125,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) @@ -398,7 +398,7 @@ static struct platform_device *h8606_devices[] __initdata = { &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif @@ -428,7 +428,7 @@ static int __init H8606_init(void) printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n"); printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif return 0; diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index 18817d57c7a1..de44a3765e59 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -146,7 +146,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -422,7 +422,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index 2c8f30ef6a7b..fe47e048c4e6 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -29,7 +29,7 @@ */ const char bfin_board_name[] = "Bluetechnix CM BF533"; -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { @@ -536,7 +536,7 @@ static struct platform_device *cm_bf533_devices[] __initdata = { &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif @@ -549,7 +549,7 @@ static int __init cm_bf533_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif return 0; diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 144556e14499..07811c209b9d 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -245,7 +245,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -484,7 +484,7 @@ static struct platform_device *ezkit_devices[] __initdata = { &smc91x_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index b597d4e50d58..e303dae4e2d9 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -104,7 +104,7 @@ static struct platform_device dm9000_device2 = { #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* all SPI peripherals info goes here */ #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) @@ -270,7 +270,7 @@ static struct platform_device *ip0x_devices[] __initdata = { #endif #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &spi_bfin_master_device, #endif diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 2afd02e14bd1..ce88a7165b62 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -219,9 +219,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ + defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) { - .modalias = "ad183x", + .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 4, @@ -251,7 +252,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -471,7 +472,7 @@ static struct i2c_gpio_platform_data i2c_gpio_data = { .scl_pin = GPIO_PF3, .sda_is_open_drain = 0, .scl_is_open_drain = 0, - .udelay = 40, + .udelay = 10, }; static struct platform_device i2c_gpio_device = { @@ -540,27 +541,150 @@ static struct platform_device bfin_dpmc = { }, }; +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ + defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) \ + || defined(CONFIG_SND_BF5XX_AC97) || \ + defined(CONFIG_SND_BF5XX_AC97_MODULE) + +#include <asm/bfin_sport.h> + +#define SPORT_REQ(x) \ + [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \ + P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0} + +static const u16 bfin_snd_pin[][7] = { + SPORT_REQ(0), + SPORT_REQ(1), +}; + +static struct bfin_snd_platform_data bfin_snd_data[] = { + { + .pin_req = &bfin_snd_pin[0][0], + }, + { + .pin_req = &bfin_snd_pin[1][0], + }, +}; + +#define BFIN_SND_RES(x) \ + [x] = { \ + { \ + .start = SPORT##x##_TCR1, \ + .end = SPORT##x##_TCR1, \ + .flags = IORESOURCE_MEM \ + }, \ + { \ + .start = CH_SPORT##x##_RX, \ + .end = CH_SPORT##x##_RX, \ + .flags = IORESOURCE_DMA, \ + }, \ + { \ + .start = CH_SPORT##x##_TX, \ + .end = CH_SPORT##x##_TX, \ + .flags = IORESOURCE_DMA, \ + }, \ + { \ + .start = IRQ_SPORT##x##_ERROR, \ + .end = IRQ_SPORT##x##_ERROR, \ + .flags = IORESOURCE_IRQ, \ + } \ + } + +static struct resource bfin_snd_resources[][4] = { + BFIN_SND_RES(0), + BFIN_SND_RES(1), +}; +#endif + #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +static struct platform_device bfin_i2s_pcm = { + .name = "bfin-i2s-pcm-audio", + .id = -1, +}; +#endif + +#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) +static struct platform_device bfin_tdm_pcm = { + .name = "bfin-tdm-pcm-audio", + .id = -1, +}; +#endif + +#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +static struct platform_device bfin_ac97_pcm = { + .name = "bfin-ac97-pcm-audio", + .id = -1, +}; +#endif + +#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \ + defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) +static const unsigned ad73311_gpio[] = { + GPIO_PF4, +}; + +static struct platform_device bfin_ad73311_machine = { + .name = "bfin-snd-ad73311", + .id = 1, + .dev = { + .platform_data = (void *)ad73311_gpio, + }, +}; +#endif + +#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE) +static struct platform_device bfin_ad73311_codec_device = { + .name = "ad73311", + .id = -1, +}; +#endif + +#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE) +static struct platform_device bfin_ad74111_codec_device = { + .name = "ad74111", + .id = -1, +}; +#endif + +#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \ + defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ + .num_resources = + ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), + .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], + .dev = { + .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], + }, }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_TDM) || \ + defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE) static struct platform_device bfin_tdm = { .name = "bfin-tdm", .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ + .num_resources = + ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), + .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], + .dev = { + .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], + }, }; #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \ + defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) static struct platform_device bfin_ac97 = { .name = "bfin-ac97", .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ + .num_resources = + ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), + .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], + .dev = { + .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], + }, }; #endif @@ -580,7 +704,7 @@ static struct platform_device *stamp_devices[] __initdata = { &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif @@ -596,7 +720,8 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if defined(CONFIG_SERIAL_BFIN_SPORT) || \ + defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -618,14 +743,42 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) - &bfin_i2s, + &bfin_i2s_pcm, #endif #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm, + &bfin_tdm_pcm, #endif #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) + &bfin_ac97_pcm, +#endif + +#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \ + defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) + &bfin_ad73311_machine, +#endif + +#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE) + &bfin_ad73311_codec_device, +#endif + +#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE) + &bfin_ad74111_codec_device, +#endif + +#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \ + defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) + &bfin_i2s, +#endif + +#if defined(CONFIG_SND_BF5XX_SOC_TDM) || \ + defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE) + &bfin_tdm, +#endif + +#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \ + defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) &bfin_ac97, #endif }; diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c index 604a430038e1..0d4a2f61a973 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c @@ -31,7 +31,7 @@ */ const char bfin_board_name[] = "Bluetechnix CM BF537E"; -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) @@ -735,7 +735,7 @@ static struct platform_device *cm_bf537e_devices[] __initdata = { &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif @@ -770,7 +770,7 @@ static int __init cm_bf537e_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537e_devices, ARRAY_SIZE(cm_bf537e_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c index d916b46a44fe..f5536982706c 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c @@ -32,7 +32,7 @@ */ const char bfin_board_name[] = "Bluetechnix CM BF537U"; -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) @@ -700,7 +700,7 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif @@ -747,7 +747,7 @@ static int __init cm_bf537u_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537u_devices, ARRAY_SIZE(cm_bf537u_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf537/boards/dnp5370.c b/arch/blackfin/mach-bf537/boards/dnp5370.c index 5f307228be63..11dadeb33d79 100644 --- a/arch/blackfin/mach-bf537/boards/dnp5370.c +++ b/arch/blackfin/mach-bf537/boards/dnp5370.c @@ -125,7 +125,7 @@ static struct platform_device asmb_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) @@ -370,7 +370,7 @@ static struct platform_device *dnp5370_devices[] __initdata = { &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &spi_bfin_master_device, #endif diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index 3901dd093b90..d2d71282618f 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -121,7 +121,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) \ @@ -496,7 +496,7 @@ static struct platform_device *minotaur_devices[] __initdata = { &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif @@ -537,7 +537,7 @@ static int __init minotaur_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index aebd31c845f0..6fd84709fc68 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -154,7 +154,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) \ @@ -477,7 +477,7 @@ static struct platform_device *stamp_devices[] __initdata = { &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif @@ -508,7 +508,7 @@ static int __init pnav_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 7fbb0bbf8676..2221173e489e 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1420,7 +1420,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, @@ -1462,7 +1462,7 @@ static struct platform_device bfin_spi0_device = { /* SPORT SPI controller data */ static struct bfin5xx_spi_master bfin_sport_spi0_info = { - .num_chipselect = 1, /* master only supports one device */ + .num_chipselect = MAX_BLACKFIN_GPIOS, .enable_dma = 0, /* master don't support DMA */ .pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0}, @@ -1492,7 +1492,7 @@ static struct platform_device bfin_sport_spi0_device = { }; static struct bfin5xx_spi_master bfin_sport_spi1_info = { - .num_chipselect = 1, /* master only supports one device */ + .num_chipselect = MAX_BLACKFIN_GPIOS, .enable_dma = 0, /* master don't support DMA */ .pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0}, @@ -1558,6 +1558,71 @@ static struct platform_device bfin_lq035q1_device = { }; #endif +#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ + || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#include <linux/videodev2.h> +#include <media/blackfin/bfin_capture.h> +#include <media/blackfin/ppi.h> + +static const unsigned short ppi_req[] = { + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, + P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, + 0, +}; + +static const struct ppi_info ppi_info = { + .type = PPI_TYPE_PPI, + .dma_ch = CH_PPI, + .irq_err = IRQ_PPI_ERROR, + .base = (void __iomem *)PPI_CONTROL, + .pin_req = ppi_req, +}; + +#if defined(CONFIG_VIDEO_VS6624) \ + || defined(CONFIG_VIDEO_VS6624_MODULE) +static struct v4l2_input vs6624_inputs[] = { + { + .index = 0, + .name = "Camera", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_UNKNOWN, + }, +}; + +static struct bcap_route vs6624_routes[] = { + { + .input = 0, + .output = 0, + }, +}; + +static const unsigned vs6624_ce_pin = GPIO_PF10; + +static struct bfin_capture_config bfin_capture_data = { + .card_name = "BF537", + .inputs = vs6624_inputs, + .num_inputs = ARRAY_SIZE(vs6624_inputs), + .routes = vs6624_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "vs6624", + .addr = 0x10, + .platform_data = (void *)&vs6624_ce_pin, + }, + .ppi_info = &ppi_info, + .ppi_control = (PACK_EN | DLEN_8 | XFR_TYPE | 0x0020), +}; +#endif + +static struct platform_device bfin_capture_device = { + .name = "bfin_capture", + .dev = { + .platform_data = &bfin_capture_data, + }, +}; +#endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { @@ -2716,7 +2781,7 @@ static struct platform_device *stamp_devices[] __initdata = { &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif @@ -2733,6 +2798,11 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_lq035q1_device, #endif +#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ + || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) + &bfin_capture_device, +#endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 6917ce2fa55e..988517671a5d 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -32,7 +32,7 @@ */ const char bfin_board_name[] = "Bluetechnix TCM BF537"; -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) @@ -702,7 +702,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = { &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif @@ -737,7 +737,7 @@ static int __init tcm_bf537_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index 8356eb599f19..1633a6f306c0 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -490,7 +490,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -874,7 +874,7 @@ static struct platform_device *cm_bf538_devices[] __initdata = { #endif #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bf538_spi_master0, &bf538_spi_master1, &bf538_spi_master2, @@ -938,7 +938,7 @@ static int __init ezkit_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf538_devices, ARRAY_SIZE(cm_bf538_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) spi_register_board_info(bf538_spi_board_info, ARRAY_SIZE(bf538_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index 0350eacec21b..68af594db48e 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -854,7 +854,7 @@ static struct platform_device para_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -1175,7 +1175,7 @@ static struct platform_device *cm_bf548_devices[] __initdata = { &bf54x_sdh_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bf54x_spi_master0, &bf54x_spi_master1, #endif @@ -1210,7 +1210,7 @@ static int __init cm_bf548_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) spi_register_board_info(bf54x_spi_board_info, ARRAY_SIZE(bf54x_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index bb868ac0fe2d..3ea45f8bd61c 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -1110,7 +1110,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif }; -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -1183,6 +1183,71 @@ static struct platform_device bf54x_spi_master1 = { }; #endif /* spi master and devices */ +#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ + || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#include <linux/videodev2.h> +#include <media/blackfin/bfin_capture.h> +#include <media/blackfin/ppi.h> + +static const unsigned short ppi_req[] = { + P_PPI1_D0, P_PPI1_D1, P_PPI1_D2, P_PPI1_D3, + P_PPI1_D4, P_PPI1_D5, P_PPI1_D6, P_PPI1_D7, + P_PPI1_CLK, P_PPI1_FS1, P_PPI1_FS2, + 0, +}; + +static const struct ppi_info ppi_info = { + .type = PPI_TYPE_EPPI, + .dma_ch = CH_EPPI1, + .irq_err = IRQ_EPPI1_ERROR, + .base = (void __iomem *)EPPI1_STATUS, + .pin_req = ppi_req, +}; + +#if defined(CONFIG_VIDEO_VS6624) \ + || defined(CONFIG_VIDEO_VS6624_MODULE) +static struct v4l2_input vs6624_inputs[] = { + { + .index = 0, + .name = "Camera", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_UNKNOWN, + }, +}; + +static struct bcap_route vs6624_routes[] = { + { + .input = 0, + .output = 0, + }, +}; + +static const unsigned vs6624_ce_pin = GPIO_PG6; + +static struct bfin_capture_config bfin_capture_data = { + .card_name = "BF548", + .inputs = vs6624_inputs, + .num_inputs = ARRAY_SIZE(vs6624_inputs), + .routes = vs6624_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "vs6624", + .addr = 0x10, + .platform_data = (void *)&vs6624_ce_pin, + }, + .ppi_info = &ppi_info, + .ppi_control = (POLC | PACKEN | DLEN_8 | XFR_TYPE | 0x20), +}; +#endif + +static struct platform_device bfin_capture_device = { + .name = "bfin_capture", + .dev = { + .platform_data = &bfin_capture_data, + }, +}; +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { [0] = { @@ -1502,10 +1567,14 @@ static struct platform_device *ezkit_devices[] __initdata = { &bf54x_sdh_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bf54x_spi_master0, &bf54x_spi_master1, #endif +#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ + || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) + &bfin_capture_device, +#endif #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) &bf54x_kpad_device, diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c index b1b7339b6ba7..f6ffd6f054c3 100644 --- a/arch/blackfin/mach-bf561/boards/acvilon.c +++ b/arch/blackfin/mach-bf561/boards/acvilon.c @@ -372,7 +372,7 @@ static struct bfin5xx_spi_chip data_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -475,7 +475,7 @@ static struct platform_device bfin_dpmc = { static struct platform_device *acvilon_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index c017cf07ed4e..d81450f635df 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -29,7 +29,7 @@ */ const char bfin_board_name[] = "Bluetechnix CM BF561"; -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) @@ -488,7 +488,7 @@ static struct platform_device *cm_bf561_devices[] __initdata = { &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif @@ -523,7 +523,7 @@ static int __init cm_bf561_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 27f22ed381d9..838978808a15 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -291,7 +291,7 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -383,7 +383,7 @@ static struct i2c_gpio_platform_data i2c_gpio_data = { .scl_pin = GPIO_PF0, .sda_is_open_drain = 0, .scl_is_open_drain = 0, - .udelay = 40, + .udelay = 10, }; static struct platform_device i2c_gpio_device = { @@ -422,6 +422,96 @@ static struct platform_device bfin_dpmc = { }, }; +#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ + || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#include <linux/videodev2.h> +#include <media/blackfin/bfin_capture.h> +#include <media/blackfin/ppi.h> + +static const unsigned short ppi_req[] = { + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, + P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, + 0, +}; + +static const struct ppi_info ppi_info = { + .type = PPI_TYPE_PPI, + .dma_ch = CH_PPI0, + .irq_err = IRQ_PPI1_ERROR, + .base = (void __iomem *)PPI0_CONTROL, + .pin_req = ppi_req, +}; + +#if defined(CONFIG_VIDEO_ADV7183) \ + || defined(CONFIG_VIDEO_ADV7183_MODULE) +#include <media/adv7183.h> +static struct v4l2_input adv7183_inputs[] = { + { + .index = 0, + .name = "Composite", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_ALL, + }, + { + .index = 1, + .name = "S-Video", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_ALL, + }, + { + .index = 2, + .name = "Component", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_ALL, + }, +}; + +static struct bcap_route adv7183_routes[] = { + { + .input = ADV7183_COMPOSITE4, + .output = ADV7183_8BIT_OUT, + }, + { + .input = ADV7183_SVIDEO0, + .output = ADV7183_8BIT_OUT, + }, + { + .input = ADV7183_COMPONENT0, + .output = ADV7183_8BIT_OUT, + }, +}; + + +static const unsigned adv7183_gpio[] = { + GPIO_PF13, /* reset pin */ + GPIO_PF2, /* output enable pin */ +}; + +static struct bfin_capture_config bfin_capture_data = { + .card_name = "BF561", + .inputs = adv7183_inputs, + .num_inputs = ARRAY_SIZE(adv7183_inputs), + .routes = adv7183_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "adv7183", + .addr = 0x20, + .platform_data = (void *)adv7183_gpio, + }, + .ppi_info = &ppi_info, + .ppi_control = (PACK_EN | DLEN_8 | DMA32 | FLD_SEL), +}; +#endif + +static struct platform_device bfin_capture_device = { + .name = "bfin_capture", + .dev = { + .platform_data = &bfin_capture_data, + }, +}; +#endif + #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) static struct platform_device bfin_i2s = { .name = "bfin-i2s", @@ -462,7 +552,7 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_isp1760_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif @@ -494,6 +584,11 @@ static struct platform_device *ezkit_devices[] __initdata = { &ezkit_flash_device, #endif +#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ + || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) + &bfin_capture_device, +#endif + #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) &bfin_i2s, #endif diff --git a/arch/blackfin/mach-bf561/include/mach/pll.h b/arch/blackfin/mach-bf561/include/mach/pll.h index 7977db2f1c12..00bdacee9cc2 100644 --- a/arch/blackfin/mach-bf561/include/mach/pll.h +++ b/arch/blackfin/mach-bf561/include/mach/pll.h @@ -16,6 +16,7 @@ #include <mach/irq.h> #define SUPPLE_0_WAKEUP ((IRQ_SUPPLE_0 - (IRQ_CORETMR + 1)) % 32) +#define SUPPLE_1_WAKEUP ((IRQ_SUPPLE_1 - (IRQ_CORETMR + 1)) % 32) static inline void bfin_iwr_restore(unsigned long iwr0, unsigned long iwr1, unsigned long iwr2) @@ -42,7 +43,8 @@ bfin_iwr_save(unsigned long niwr0, unsigned long niwr1, unsigned long niwr2, static inline void bfin_iwr_set_sup0(unsigned long *iwr0, unsigned long *iwr1, unsigned long *iwr2) { - bfin_iwr_save(0, IWR_ENABLE(SUPPLE_0_WAKEUP), 0, iwr0, iwr1, iwr2); + bfin_iwr_save(0, IWR_ENABLE(SUPPLE_0_WAKEUP) | + IWR_ENABLE(SUPPLE_1_WAKEUP), 0, iwr0, iwr1, iwr2); } #endif diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c index db22401e7605..ab1c617b9cfc 100644 --- a/arch/blackfin/mach-bf561/smp.c +++ b/arch/blackfin/mach-bf561/smp.c @@ -84,7 +84,7 @@ int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle if ((bfin_read_SYSCR() & COREB_SRAM_INIT) == 0) { /* CoreB already running, sending ipi to wakeup it */ - platform_send_ipi_cpu(cpu, IRQ_SUPPLE_0); + smp_send_reschedule(cpu); } else { /* Kick CoreB, which should start execution from CORE_SRAM_BASE. */ bfin_write_SYSCR(bfin_read_SYSCR() & ~COREB_SRAM_INIT); @@ -114,7 +114,8 @@ void __init platform_request_ipi(int irq, void *handler) int ret; const char *name = (irq == IRQ_SUPPLE_0) ? supple0 : supple1; - ret = request_irq(irq, handler, IRQF_PERCPU, name, handler); + ret = request_irq(irq, handler, IRQF_PERCPU | IRQF_NO_SUSPEND | + IRQF_FORCE_RESUME, name, handler); if (ret) panic("Cannot request %s for IPI service", name); } diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 0784a52389c8..ac8f8a43158c 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -14,6 +14,7 @@ #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/cache.h> +#include <linux/clockchips.h> #include <linux/profile.h> #include <linux/errno.h> #include <linux/mm.h> @@ -47,9 +48,10 @@ unsigned long blackfin_iflush_l1_entry[NR_CPUS]; struct blackfin_initial_pda __cpuinitdata initial_pda_coreb; -#define BFIN_IPI_RESCHEDULE 0 -#define BFIN_IPI_CALL_FUNC 1 -#define BFIN_IPI_CPU_STOP 2 +#define BFIN_IPI_TIMER 0 +#define BFIN_IPI_RESCHEDULE 1 +#define BFIN_IPI_CALL_FUNC 2 +#define BFIN_IPI_CPU_STOP 3 struct blackfin_flush_data { unsigned long start; @@ -160,6 +162,14 @@ static irqreturn_t ipi_handler_int0(int irq, void *dev_instance) return IRQ_HANDLED; } +DECLARE_PER_CPU(struct clock_event_device, coretmr_events); +void ipi_timer(void) +{ + int cpu = smp_processor_id(); + struct clock_event_device *evt = &per_cpu(coretmr_events, cpu); + evt->event_handler(evt); +} + static irqreturn_t ipi_handler_int1(int irq, void *dev_instance) { struct ipi_message *msg; @@ -176,18 +186,17 @@ static irqreturn_t ipi_handler_int1(int irq, void *dev_instance) while (msg_queue->count) { msg = &msg_queue->ipi_message[msg_queue->head]; switch (msg->type) { + case BFIN_IPI_TIMER: + ipi_timer(); + break; case BFIN_IPI_RESCHEDULE: scheduler_ipi(); break; case BFIN_IPI_CALL_FUNC: - spin_unlock_irqrestore(&msg_queue->lock, flags); ipi_call_function(cpu, msg); - spin_lock_irqsave(&msg_queue->lock, flags); break; case BFIN_IPI_CPU_STOP: - spin_unlock_irqrestore(&msg_queue->lock, flags); ipi_cpu_stop(cpu); - spin_lock_irqsave(&msg_queue->lock, flags); break; default: printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%lx\n", @@ -297,8 +306,6 @@ void smp_send_reschedule(int cpu) { cpumask_t callmap; /* simply trigger an ipi */ - if (cpu_is_offline(cpu)) - return; cpumask_clear(&callmap); cpumask_set_cpu(cpu, &callmap); @@ -308,6 +315,16 @@ void smp_send_reschedule(int cpu) return; } +void smp_send_msg(const struct cpumask *mask, unsigned long type) +{ + smp_send_message(*mask, type, NULL, NULL, 0); +} + +void smp_timer_broadcast(const struct cpumask *mask) +{ + smp_send_msg(mask, BFIN_IPI_TIMER); +} + void smp_send_stop(void) { cpumask_t callmap; @@ -326,17 +343,24 @@ void smp_send_stop(void) int __cpuinit __cpu_up(unsigned int cpu) { int ret; - static struct task_struct *idle; + struct blackfin_cpudata *ci = &per_cpu(cpu_data, cpu); + struct task_struct *idle = ci->idle; - if (idle) + if (idle) { free_task(idle); - - idle = fork_idle(cpu); - if (IS_ERR(idle)) { - printk(KERN_ERR "CPU%u: fork() failed\n", cpu); - return PTR_ERR(idle); + idle = NULL; } + if (!idle) { + idle = fork_idle(cpu); + if (IS_ERR(idle)) { + printk(KERN_ERR "CPU%u: fork() failed\n", cpu); + return PTR_ERR(idle); + } + ci->idle = idle; + } else { + init_idle(idle, cpu); + } secondary_stack = task_stack_page(idle) + THREAD_SIZE; ret = platform_boot_secondary(cpu, idle); @@ -411,6 +435,7 @@ void __cpuinit secondary_start_kernel(void) bfin_setup_caches(cpu); + notify_cpu_starting(cpu); /* * Calibrate loops per jiffy value. * IRQs need to be enabled here - D-cache can be invalidated @@ -453,8 +478,10 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end) smp_flush_data.start = start; smp_flush_data.end = end; - if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 0)) + preempt_disable(); + if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1)) printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n"); + preempt_enable(); } EXPORT_SYMBOL_GPL(smp_icache_flush_range_others); diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig new file mode 100644 index 000000000000..26e67f0f0051 --- /dev/null +++ b/arch/c6x/Kconfig @@ -0,0 +1,174 @@ +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. +# + +config TMS320C6X + def_bool y + select CLKDEV_LOOKUP + select GENERIC_IRQ_SHOW + select HAVE_ARCH_TRACEHOOK + select HAVE_DMA_API_DEBUG + select HAVE_GENERIC_HARDIRQS + select HAVE_MEMBLOCK + select HAVE_SPARSE_IRQ + select OF + select OF_EARLY_FLATTREE + +config MMU + def_bool n + +config ZONE_DMA + def_bool y + +config FPU + def_bool n + +config HIGHMEM + def_bool n + +config NUMA + def_bool n + +config RWSEM_GENERIC_SPINLOCK + def_bool y + +config RWSEM_XCHGADD_ALGORITHM + def_bool n + +config GENERIC_CALIBRATE_DELAY + def_bool y + +config GENERIC_HWEIGHT + def_bool y + +config GENERIC_CLOCKEVENTS + def_bool y + +config GENERIC_CLOCKEVENTS_BROADCAST + bool + +config GENERIC_BUG + def_bool y + +config COMMON_CLKDEV + def_bool y + +config C6X_BIG_KERNEL + bool "Build a big kernel" + help + The C6X function call instruction has a limited range of +/- 2MiB. + This is sufficient for most kernels, but some kernel configurations + with lots of compiled-in functionality may require a larger range + for function calls. Use this option to have the compiler generate + function calls with 32-bit range. This will make the kernel both + larger and slower. + + If unsure, say N. + +source "init/Kconfig" + +# Use the generic interrupt handling code in kernel/irq/ + +source "kernel/Kconfig.freezer" + +config CMDLINE_BOOL + bool "Default bootloader kernel arguments" + +config CMDLINE + string "Kernel command line" + depends on CMDLINE_BOOL + default "console=ttyS0,57600" + help + On some architectures there is currently no way for the boot loader + to pass arguments to the kernel. For these architectures, you should + supply some command-line options at build time by entering them + here. + +config CMDLINE_FORCE + bool "Force default kernel command string" + depends on CMDLINE_BOOL + default n + help + Set this to have arguments from the default kernel command string + override those passed by the boot loader. + +config CPU_BIG_ENDIAN + bool "Build big-endian kernel" + default n + help + Say Y if you plan on running a kernel in big-endian mode. + Note that your board must be properly built and your board + port must properly enable any big-endian related features + of your chipset/board/processor. + +config FORCE_MAX_ZONEORDER + int "Maximum zone order" + default "13" + help + The kernel memory allocator divides physically contiguous memory + blocks into "zones", where each zone is a power of two number of + pages. This option selects the largest power of two that the kernel + keeps in the memory allocator. If you need to allocate very large + blocks of physically contiguous memory, then you may need to + increase this value. + + This config option is actually maximum order plus one. For example, + a value of 11 means that the largest free memory block is 2^10 pages. + +menu "Processor type and features" + +source "arch/c6x/platforms/Kconfig" + +config TMS320C6X_CACHES_ON + bool "L2 cache support" + default y + +config KERNEL_RAM_BASE_ADDRESS + hex "Virtual address of memory base" + default 0xe0000000 if SOC_TMS320C6455 + default 0xe0000000 if SOC_TMS320C6457 + default 0xe0000000 if SOC_TMS320C6472 + default 0x80000000 + +source "mm/Kconfig" + +source "kernel/Kconfig.preempt" + +source "kernel/Kconfig.hz" +source "kernel/time/Kconfig" + +endmenu + +menu "Executable file formats" + +source "fs/Kconfig.binfmt" + +endmenu + +source "net/Kconfig" + +source "drivers/Kconfig" + +source "fs/Kconfig" + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "lib/Kconfig" + +menu "Kernel hacking" + +source "lib/Kconfig.debug" + +config ACCESS_CHECK + bool "Check the user pointer address" + default y + help + Usually the pointer transfer from user space is checked to see if its + address is in the kernel space. + + Say N here to disable that check to improve the performance. + +endmenu diff --git a/arch/c6x/Makefile b/arch/c6x/Makefile new file mode 100644 index 000000000000..1d08dd070277 --- /dev/null +++ b/arch/c6x/Makefile @@ -0,0 +1,60 @@ +# +# linux/arch/c6x/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# + +cflags-y += -mno-dsbt -msdata=none + +cflags-$(CONFIG_C6X_BIG_KERNEL) += -mlong-calls + +CFLAGS_MODULE += -mlong-calls -mno-dsbt -msdata=none + +CHECKFLAGS += + +KBUILD_CFLAGS += $(cflags-y) +KBUILD_AFLAGS += $(cflags-y) + +ifdef CONFIG_CPU_BIG_ENDIAN +KBUILD_CFLAGS += -mbig-endian +KBUILD_AFLAGS += -mbig-endian +LINKFLAGS += -mbig-endian +KBUILD_LDFLAGS += -mbig-endian +LDFLAGS += -EB +endif + +head-y := arch/c6x/kernel/head.o +core-y += arch/c6x/kernel/ arch/c6x/mm/ arch/c6x/platforms/ +libs-y += arch/c6x/lib/ + +# Default to vmlinux.bin, override when needed +all: vmlinux.bin + +boot := arch/$(ARCH)/boot + +# Are we making a dtbImage.<boardname> target? If so, crack out the boardname +DTB:=$(subst dtbImage.,,$(filter dtbImage.%, $(MAKECMDGOALS))) +export DTB + +ifneq ($(DTB),) +core-y += $(boot)/ +endif + +# With make 3.82 we cannot mix normal and wildcard targets + +vmlinux.bin: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@) + +dtbImage.%: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@) + +archclean: + $(Q)$(MAKE) $(clean)=$(boot) + +define archhelp + @echo ' vmlinux.bin - Binary kernel image (arch/$(ARCH)/boot/vmlinux.bin)' + @echo ' dtbImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in' + @echo ' - stripped elf with fdt blob' +endef diff --git a/arch/c6x/boot/Makefile b/arch/c6x/boot/Makefile new file mode 100644 index 000000000000..ecca820e6041 --- /dev/null +++ b/arch/c6x/boot/Makefile @@ -0,0 +1,30 @@ +# +# Makefile for bootable kernel images +# + +OBJCOPYFLAGS_vmlinux.bin := -O binary +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + +DTC_FLAGS ?= -p 1024 + +ifneq ($(DTB),) +obj-y += linked_dtb.o +endif + +$(obj)/%.dtb: $(src)/dts/%.dts FORCE + $(call cmd,dtc) + +quiet_cmd_cp = CP $< $@$2 + cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false) + +# Generate builtin.dtb from $(DTB).dtb +$(obj)/builtin.dtb: $(obj)/$(DTB).dtb + $(call if_changed,cp) + +$(obj)/linked_dtb.o: $(obj)/builtin.dtb + +$(obj)/dtbImage.%: vmlinux + $(call if_changed,objcopy) + +clean-files := $(obj)/*.dtb diff --git a/arch/c6x/boot/dts/dsk6455.dts b/arch/c6x/boot/dts/dsk6455.dts new file mode 100644 index 000000000000..2b71f800618d --- /dev/null +++ b/arch/c6x/boot/dts/dsk6455.dts @@ -0,0 +1,62 @@ +/* + * arch/c6x/boot/dts/dsk6455.dts + * + * DSK6455 Evaluation Platform For TMS320C6455 + * Copyright (C) 2011 Texas Instruments Incorporated + * + * Author: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +/dts-v1/; + +/include/ "tms320c6455.dtsi" + +/ { + model = "Spectrum Digital DSK6455"; + compatible = "spectrum-digital,dsk6455"; + + chosen { + bootargs = "root=/dev/nfs ip=dhcp rw"; + }; + + memory { + device_type = "memory"; + reg = <0xE0000000 0x08000000>; + }; + + soc { + megamod_pic: interrupt-controller@1800000 { + interrupts = < 12 13 14 15 >; + }; + + emifa@70000000 { + flash@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x3 0x0 0x400000>; + bank-width = <1>; + device-width = <1>; + partition@0 { + reg = <0x0 0x400000>; + label = "NOR"; + }; + }; + }; + + timer1: timer@2980000 { + interrupt-parent = <&megamod_pic>; + interrupts = < 69 >; + }; + + clock-controller@029a0000 { + clock-frequency = <50000000>; + }; + }; +}; diff --git a/arch/c6x/boot/dts/evmc6457.dts b/arch/c6x/boot/dts/evmc6457.dts new file mode 100644 index 000000000000..0301eb9a8ff8 --- /dev/null +++ b/arch/c6x/boot/dts/evmc6457.dts @@ -0,0 +1,48 @@ +/* + * arch/c6x/boot/dts/evmc6457.dts + * + * EVMC6457 Evaluation Platform For TMS320C6457 + * + * Copyright (C) 2011 Texas Instruments Incorporated + * + * Author: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +/dts-v1/; + +/include/ "tms320c6457.dtsi" + +/ { + model = "eInfochips EVMC6457"; + compatible = "einfochips,evmc6457"; + + chosen { + bootargs = "console=hvc root=/dev/nfs ip=dhcp rw"; + }; + + memory { + device_type = "memory"; + reg = <0xE0000000 0x10000000>; + }; + + soc { + megamod_pic: interrupt-controller@1800000 { + interrupts = < 12 13 14 15 >; + }; + + timer0: timer@2940000 { + interrupt-parent = <&megamod_pic>; + interrupts = < 67 >; + }; + + clock-controller@29a0000 { + clock-frequency = <60000000>; + }; + }; +}; diff --git a/arch/c6x/boot/dts/evmc6472.dts b/arch/c6x/boot/dts/evmc6472.dts new file mode 100644 index 000000000000..3e207b449a93 --- /dev/null +++ b/arch/c6x/boot/dts/evmc6472.dts @@ -0,0 +1,73 @@ +/* + * arch/c6x/boot/dts/evmc6472.dts + * + * EVMC6472 Evaluation Platform For TMS320C6472 + * + * Copyright (C) 2011 Texas Instruments Incorporated + * + * Author: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +/dts-v1/; + +/include/ "tms320c6472.dtsi" + +/ { + model = "eInfochips EVMC6472"; + compatible = "einfochips,evmc6472"; + + chosen { + bootargs = "console=hvc root=/dev/nfs ip=dhcp rw"; + }; + + memory { + device_type = "memory"; + reg = <0xE0000000 0x10000000>; + }; + + soc { + megamod_pic: interrupt-controller@1800000 { + interrupts = < 12 13 14 15 >; + }; + + timer0: timer@25e0000 { + interrupt-parent = <&megamod_pic>; + interrupts = < 16 >; + }; + + timer1: timer@25f0000 { + interrupt-parent = <&megamod_pic>; + interrupts = < 16 >; + }; + + timer2: timer@2600000 { + interrupt-parent = <&megamod_pic>; + interrupts = < 16 >; + }; + + timer3: timer@2610000 { + interrupt-parent = <&megamod_pic>; + interrupts = < 16 >; + }; + + timer4: timer@2620000 { + interrupt-parent = <&megamod_pic>; + interrupts = < 16 >; + }; + + timer5: timer@2630000 { + interrupt-parent = <&megamod_pic>; + interrupts = < 16 >; + }; + + clock-controller@29a0000 { + clock-frequency = <25000000>; + }; + }; +}; diff --git a/arch/c6x/boot/dts/evmc6474.dts b/arch/c6x/boot/dts/evmc6474.dts new file mode 100644 index 000000000000..4dc291292bc4 --- /dev/null +++ b/arch/c6x/boot/dts/evmc6474.dts @@ -0,0 +1,58 @@ +/* + * arch/c6x/boot/dts/evmc6474.dts + * + * EVMC6474 Evaluation Platform For TMS320C6474 + * + * Copyright (C) 2011 Texas Instruments Incorporated + * + * Author: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +/dts-v1/; + +/include/ "tms320c6474.dtsi" + +/ { + model = "Spectrum Digital EVMC6474"; + compatible = "spectrum-digital,evmc6474"; + + chosen { + bootargs = "console=hvc root=/dev/nfs ip=dhcp rw"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x08000000>; + }; + + soc { + megamod_pic: interrupt-controller@1800000 { + interrupts = < 12 13 14 15 >; + }; + + timer3: timer@2940000 { + interrupt-parent = <&megamod_pic>; + interrupts = < 39 >; + }; + + timer4: timer@2950000 { + interrupt-parent = <&megamod_pic>; + interrupts = < 41 >; + }; + + timer5: timer@2960000 { + interrupt-parent = <&megamod_pic>; + interrupts = < 43 >; + }; + + clock-controller@29a0000 { + clock-frequency = <50000000>; + }; + }; +}; diff --git a/arch/c6x/boot/dts/tms320c6455.dtsi b/arch/c6x/boot/dts/tms320c6455.dtsi new file mode 100644 index 000000000000..a804ec1e018b --- /dev/null +++ b/arch/c6x/boot/dts/tms320c6455.dtsi @@ -0,0 +1,96 @@ + +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "ti,c64x+"; + reg = <0>; + }; + }; + + soc { + compatible = "simple-bus"; + model = "tms320c6455"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + core_pic: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + compatible = "ti,c64x+core-pic"; + }; + + /* + * Megamodule interrupt controller + */ + megamod_pic: interrupt-controller@1800000 { + compatible = "ti,c64x+megamod-pic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1800000 0x1000>; + interrupt-parent = <&core_pic>; + }; + + cache-controller@1840000 { + compatible = "ti,c64x+cache"; + reg = <0x01840000 0x8400>; + }; + + emifa@70000000 { + compatible = "ti,c64x+emifa", "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x70000000 0x100>; + ranges = <0x2 0x0 0xa0000000 0x00000008 + 0x3 0x0 0xb0000000 0x00400000 + 0x4 0x0 0xc0000000 0x10000000 + 0x5 0x0 0xD0000000 0x10000000>; + + ti,dscr-dev-enable = <13>; + ti,emifa-burst-priority = <255>; + ti,emifa-ce-config = <0x00240120 + 0x00240120 + 0x00240122 + 0x00240122>; + }; + + timer1: timer@2980000 { + compatible = "ti,c64x+timer64"; + reg = <0x2980000 0x40>; + ti,dscr-dev-enable = <4>; + }; + + clock-controller@029a0000 { + compatible = "ti,c6455-pll", "ti,c64x+pll"; + reg = <0x029a0000 0x200>; + ti,c64x+pll-bypass-delay = <1440>; + ti,c64x+pll-reset-delay = <15360>; + ti,c64x+pll-lock-delay = <24000>; + }; + + device-state-config-regs@2a80000 { + compatible = "ti,c64x+dscr"; + reg = <0x02a80000 0x41000>; + + ti,dscr-devstat = <0>; + ti,dscr-silicon-rev = <8 28 0xf>; + ti,dscr-rmii-resets = <0 0x40020 0x00040000>; + + ti,dscr-locked-regs = <0x40008 0x40004 0x0f0a0b00>; + ti,dscr-devstate-ctl-regs = + <0 12 0x40008 1 0 0 2 + 12 1 0x40008 3 0 30 2 + 13 2 0x4002c 1 0xffffffff 0 1>; + ti,dscr-devstate-stat-regs = + <0 10 0x40014 1 0 0 3 + 10 2 0x40018 1 0 0 3>; + }; + }; +}; diff --git a/arch/c6x/boot/dts/tms320c6457.dtsi b/arch/c6x/boot/dts/tms320c6457.dtsi new file mode 100644 index 000000000000..35f40709a719 --- /dev/null +++ b/arch/c6x/boot/dts/tms320c6457.dtsi @@ -0,0 +1,68 @@ + +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "ti,c64x+"; + reg = <0>; + }; + }; + + soc { + compatible = "simple-bus"; + model = "tms320c6457"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + core_pic: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + compatible = "ti,c64x+core-pic"; + }; + + megamod_pic: interrupt-controller@1800000 { + compatible = "ti,c64x+megamod-pic"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&core_pic>; + reg = <0x1800000 0x1000>; + }; + + cache-controller@1840000 { + compatible = "ti,c64x+cache"; + reg = <0x01840000 0x8400>; + }; + + device-state-controller@2880800 { + compatible = "ti,c64x+dscr"; + reg = <0x02880800 0x400>; + + ti,dscr-devstat = <0x20>; + ti,dscr-silicon-rev = <0x18 28 0xf>; + ti,dscr-mac-fuse-regs = <0x114 3 4 5 6 + 0x118 0 0 1 2>; + ti,dscr-kick-regs = <0x38 0x83E70B13 + 0x3c 0x95A4F1E0>; + }; + + timer0: timer@2940000 { + compatible = "ti,c64x+timer64"; + reg = <0x2940000 0x40>; + }; + + clock-controller@29a0000 { + compatible = "ti,c6457-pll", "ti,c64x+pll"; + reg = <0x029a0000 0x200>; + ti,c64x+pll-bypass-delay = <300>; + ti,c64x+pll-reset-delay = <24000>; + ti,c64x+pll-lock-delay = <50000>; + }; + }; +}; diff --git a/arch/c6x/boot/dts/tms320c6472.dtsi b/arch/c6x/boot/dts/tms320c6472.dtsi new file mode 100644 index 000000000000..b488aaec65c0 --- /dev/null +++ b/arch/c6x/boot/dts/tms320c6472.dtsi @@ -0,0 +1,134 @@ + +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + reg = <0>; + model = "ti,c64x+"; + }; + cpu@1 { + device_type = "cpu"; + reg = <1>; + model = "ti,c64x+"; + }; + cpu@2 { + device_type = "cpu"; + reg = <2>; + model = "ti,c64x+"; + }; + cpu@3 { + device_type = "cpu"; + reg = <3>; + model = "ti,c64x+"; + }; + cpu@4 { + device_type = "cpu"; + reg = <4>; + model = "ti,c64x+"; + }; + cpu@5 { + device_type = "cpu"; + reg = <5>; + model = "ti,c64x+"; + }; + }; + + soc { + compatible = "simple-bus"; + model = "tms320c6472"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + core_pic: interrupt-controller { + compatible = "ti,c64x+core-pic"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + megamod_pic: interrupt-controller@1800000 { + compatible = "ti,c64x+megamod-pic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1800000 0x1000>; + interrupt-parent = <&core_pic>; + }; + + cache-controller@1840000 { + compatible = "ti,c64x+cache"; + reg = <0x01840000 0x8400>; + }; + + timer0: timer@25e0000 { + compatible = "ti,c64x+timer64"; + ti,core-mask = < 0x01 >; + reg = <0x25e0000 0x40>; + }; + + timer1: timer@25f0000 { + compatible = "ti,c64x+timer64"; + ti,core-mask = < 0x02 >; + reg = <0x25f0000 0x40>; + }; + + timer2: timer@2600000 { + compatible = "ti,c64x+timer64"; + ti,core-mask = < 0x04 >; + reg = <0x2600000 0x40>; + }; + + timer3: timer@2610000 { + compatible = "ti,c64x+timer64"; + ti,core-mask = < 0x08 >; + reg = <0x2610000 0x40>; + }; + + timer4: timer@2620000 { + compatible = "ti,c64x+timer64"; + ti,core-mask = < 0x10 >; + reg = <0x2620000 0x40>; + }; + + timer5: timer@2630000 { + compatible = "ti,c64x+timer64"; + ti,core-mask = < 0x20 >; + reg = <0x2630000 0x40>; + }; + + clock-controller@29a0000 { + compatible = "ti,c6472-pll", "ti,c64x+pll"; + reg = <0x029a0000 0x200>; + ti,c64x+pll-bypass-delay = <200>; + ti,c64x+pll-reset-delay = <12000>; + ti,c64x+pll-lock-delay = <80000>; + }; + + device-state-controller@2a80000 { + compatible = "ti,c64x+dscr"; + reg = <0x02a80000 0x1000>; + + ti,dscr-devstat = <0>; + ti,dscr-silicon-rev = <0x70c 16 0xff>; + + ti,dscr-mac-fuse-regs = <0x700 1 2 3 4 + 0x704 5 6 0 0>; + + ti,dscr-rmii-resets = <0x208 1 + 0x20c 1>; + + ti,dscr-locked-regs = <0x200 0x204 0x0a1e183a + 0x40c 0x420 0xbea7 + 0x41c 0x420 0xbea7>; + + ti,dscr-privperm = <0x41c 0xaaaaaaaa>; + + ti,dscr-devstate-ctl-regs = <0 13 0x200 1 0 0 1>; + }; + }; +}; diff --git a/arch/c6x/boot/dts/tms320c6474.dtsi b/arch/c6x/boot/dts/tms320c6474.dtsi new file mode 100644 index 000000000000..cc601bf348a1 --- /dev/null +++ b/arch/c6x/boot/dts/tms320c6474.dtsi @@ -0,0 +1,89 @@ + +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + reg = <0>; + model = "ti,c64x+"; + }; + cpu@1 { + device_type = "cpu"; + reg = <1>; + model = "ti,c64x+"; + }; + cpu@2 { + device_type = "cpu"; + reg = <2>; + model = "ti,c64x+"; + }; + }; + + soc { + compatible = "simple-bus"; + model = "tms320c6474"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + core_pic: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + compatible = "ti,c64x+core-pic"; + }; + + megamod_pic: interrupt-controller@1800000 { + compatible = "ti,c64x+megamod-pic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1800000 0x1000>; + interrupt-parent = <&core_pic>; + }; + + cache-controller@1840000 { + compatible = "ti,c64x+cache"; + reg = <0x01840000 0x8400>; + }; + + timer3: timer@2940000 { + compatible = "ti,c64x+timer64"; + ti,core-mask = < 0x04 >; + reg = <0x2940000 0x40>; + }; + + timer4: timer@2950000 { + compatible = "ti,c64x+timer64"; + ti,core-mask = < 0x02 >; + reg = <0x2950000 0x40>; + }; + + timer5: timer@2960000 { + compatible = "ti,c64x+timer64"; + ti,core-mask = < 0x01 >; + reg = <0x2960000 0x40>; + }; + + device-state-controller@2880800 { + compatible = "ti,c64x+dscr"; + reg = <0x02880800 0x400>; + + ti,dscr-devstat = <0x004>; + ti,dscr-silicon-rev = <0x014 28 0xf>; + ti,dscr-mac-fuse-regs = <0x34 3 4 5 6 + 0x38 0 0 1 2>; + }; + + clock-controller@29a0000 { + compatible = "ti,c6474-pll", "ti,c64x+pll"; + reg = <0x029a0000 0x200>; + ti,c64x+pll-bypass-delay = <120>; + ti,c64x+pll-reset-delay = <30000>; + ti,c64x+pll-lock-delay = <60000>; + }; + }; +}; diff --git a/arch/c6x/boot/linked_dtb.S b/arch/c6x/boot/linked_dtb.S new file mode 100644 index 000000000000..57a4454eaec3 --- /dev/null +++ b/arch/c6x/boot/linked_dtb.S @@ -0,0 +1,2 @@ +.section __fdt_blob,"a" +.incbin "arch/c6x/boot/builtin.dtb" diff --git a/arch/c6x/configs/dsk6455_defconfig b/arch/c6x/configs/dsk6455_defconfig new file mode 100644 index 000000000000..4663487c67a1 --- /dev/null +++ b/arch/c6x/configs/dsk6455_defconfig @@ -0,0 +1,44 @@ +CONFIG_SOC_TMS320C6455=y +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_SPARSE_IRQ=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EXPERT=y +# CONFIG_FUTEX is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=17000 +CONFIG_MISC_DEVICES=y +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_CRC16=y +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_MTD=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP_OF=y diff --git a/arch/c6x/configs/evmc6457_defconfig b/arch/c6x/configs/evmc6457_defconfig new file mode 100644 index 000000000000..bba40e195ec4 --- /dev/null +++ b/arch/c6x/configs/evmc6457_defconfig @@ -0,0 +1,41 @@ +CONFIG_SOC_TMS320C6457=y +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_SPARSE_IRQ=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EXPERT=y +# CONFIG_FUTEX is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +CONFIG_BOARD_EVM6457=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=17000 +CONFIG_MISC_DEVICES=y +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_CRC16=y +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_BUGVERBOSE is not set diff --git a/arch/c6x/configs/evmc6472_defconfig b/arch/c6x/configs/evmc6472_defconfig new file mode 100644 index 000000000000..8c46155f6d31 --- /dev/null +++ b/arch/c6x/configs/evmc6472_defconfig @@ -0,0 +1,42 @@ +CONFIG_SOC_TMS320C6472=y +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_SPARSE_IRQ=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EXPERT=y +# CONFIG_FUTEX is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +# CONFIG_CMDLINE_FORCE is not set +CONFIG_BOARD_EVM6472=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=17000 +CONFIG_MISC_DEVICES=y +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_CRC16=y +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_BUGVERBOSE is not set diff --git a/arch/c6x/configs/evmc6474_defconfig b/arch/c6x/configs/evmc6474_defconfig new file mode 100644 index 000000000000..15533f632313 --- /dev/null +++ b/arch/c6x/configs/evmc6474_defconfig @@ -0,0 +1,42 @@ +CONFIG_SOC_TMS320C6474=y +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_SPARSE_IRQ=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EXPERT=y +# CONFIG_FUTEX is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +# CONFIG_CMDLINE_FORCE is not set +CONFIG_BOARD_EVM6474=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=17000 +CONFIG_MISC_DEVICES=y +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_CRC16=y +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_BUGVERBOSE is not set diff --git a/arch/c6x/include/asm/Kbuild b/arch/c6x/include/asm/Kbuild new file mode 100644 index 000000000000..13dcf78adf91 --- /dev/null +++ b/arch/c6x/include/asm/Kbuild @@ -0,0 +1,54 @@ +include include/asm-generic/Kbuild.asm + +generic-y += atomic.h +generic-y += auxvec.h +generic-y += bitsperlong.h +generic-y += bug.h +generic-y += bugs.h +generic-y += cputime.h +generic-y += current.h +generic-y += device.h +generic-y += div64.h +generic-y += dma.h +generic-y += emergency-restart.h +generic-y += errno.h +generic-y += fb.h +generic-y += fcntl.h +generic-y += futex.h +generic-y += hw_irq.h +generic-y += io.h +generic-y += ioctl.h +generic-y += ioctls.h +generic-y += ipcbuf.h +generic-y += irq_regs.h +generic-y += kdebug.h +generic-y += kmap_types.h +generic-y += local.h +generic-y += mman.h +generic-y += mmu_context.h +generic-y += msgbuf.h +generic-y += param.h +generic-y += pci.h +generic-y += percpu.h +generic-y += pgalloc.h +generic-y += poll.h +generic-y += posix_types.h +generic-y += resource.h +generic-y += scatterlist.h +generic-y += segment.h +generic-y += sembuf.h +generic-y += shmbuf.h +generic-y += shmparam.h +generic-y += siginfo.h +generic-y += socket.h +generic-y += sockios.h +generic-y += stat.h +generic-y += statfs.h +generic-y += termbits.h +generic-y += termios.h +generic-y += tlbflush.h +generic-y += topology.h +generic-y += types.h +generic-y += ucontext.h +generic-y += user.h +generic-y += vga.h diff --git a/arch/c6x/include/asm/asm-offsets.h b/arch/c6x/include/asm/asm-offsets.h new file mode 100644 index 000000000000..d370ee36a182 --- /dev/null +++ b/arch/c6x/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/c6x/include/asm/bitops.h b/arch/c6x/include/asm/bitops.h new file mode 100644 index 000000000000..39ab7e874d96 --- /dev/null +++ b/arch/c6x/include/asm/bitops.h @@ -0,0 +1,105 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_BITOPS_H +#define _ASM_C6X_BITOPS_H + +#ifdef __KERNEL__ + +#include <linux/bitops.h> + +#include <asm/system.h> +#include <asm/byteorder.h> + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +/* + * We are lucky, DSP is perfect for bitops: do it in 3 cycles + */ + +/** + * __ffs - find first bit in word. + * @word: The word to search + * + * Undefined if no bit exists, so code should check against 0 first. + * Note __ffs(0) = undef, __ffs(1) = 0, __ffs(0x80000000) = 31. + * + */ +static inline unsigned long __ffs(unsigned long x) +{ + asm (" bitr .M1 %0,%0\n" + " nop\n" + " lmbd .L1 1,%0,%0\n" + : "+a"(x)); + + return x; +} + +/* + * ffz - find first zero in word. + * @word: The word to search + * + * Undefined if no zero exists, so code should check against ~0UL first. + */ +#define ffz(x) __ffs(~(x)) + +/** + * fls - find last (most-significant) bit set + * @x: the word to search + * + * This is defined the same way as ffs. + * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. + */ +static inline int fls(int x) +{ + if (!x) + return 0; + + asm (" lmbd .L1 1,%0,%0\n" : "+a"(x)); + + return 32 - x; +} + +/** + * ffs - find first bit set + * @x: the word to search + * + * This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + * Note ffs(0) = 0, ffs(1) = 1, ffs(0x80000000) = 32. + */ +static inline int ffs(int x) +{ + if (!x) + return 0; + + return __ffs(x) + 1; +} + +#include <asm-generic/bitops/__fls.h> +#include <asm-generic/bitops/fls64.h> +#include <asm-generic/bitops/find.h> + +#include <asm-generic/bitops/sched.h> +#include <asm-generic/bitops/hweight.h> +#include <asm-generic/bitops/lock.h> + +#include <asm-generic/bitops/atomic.h> +#include <asm-generic/bitops/non-atomic.h> +#include <asm-generic/bitops/le.h> +#include <asm-generic/bitops/ext2-atomic.h> + +#endif /* __KERNEL__ */ +#endif /* _ASM_C6X_BITOPS_H */ diff --git a/arch/c6x/include/asm/byteorder.h b/arch/c6x/include/asm/byteorder.h new file mode 100644 index 000000000000..166038db342b --- /dev/null +++ b/arch/c6x/include/asm/byteorder.h @@ -0,0 +1,12 @@ +#ifndef _ASM_C6X_BYTEORDER_H +#define _ASM_C6X_BYTEORDER_H + +#include <asm/types.h> + +#ifdef _BIG_ENDIAN +#include <linux/byteorder/big_endian.h> +#else /* _BIG_ENDIAN */ +#include <linux/byteorder/little_endian.h> +#endif /* _BIG_ENDIAN */ + +#endif /* _ASM_BYTEORDER_H */ diff --git a/arch/c6x/include/asm/cache.h b/arch/c6x/include/asm/cache.h new file mode 100644 index 000000000000..6d521d96d941 --- /dev/null +++ b/arch/c6x/include/asm/cache.h @@ -0,0 +1,90 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2005, 2006, 2009, 2010 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_CACHE_H +#define _ASM_C6X_CACHE_H + +#include <linux/irqflags.h> + +/* + * Cache line size + */ +#define L1D_CACHE_BYTES 64 +#define L1P_CACHE_BYTES 32 +#define L2_CACHE_BYTES 128 + +/* + * L2 used as cache + */ +#define L2MODE_SIZE L2MODE_256K_CACHE + +/* + * For practical reasons the L1_CACHE_BYTES defines should not be smaller than + * the L2 line size + */ +#define L1_CACHE_BYTES L2_CACHE_BYTES + +#define L2_CACHE_ALIGN_LOW(x) \ + (((x) & ~(L2_CACHE_BYTES - 1))) +#define L2_CACHE_ALIGN_UP(x) \ + (((x) + (L2_CACHE_BYTES - 1)) & ~(L2_CACHE_BYTES - 1)) +#define L2_CACHE_ALIGN_CNT(x) \ + (((x) + (sizeof(int) - 1)) & ~(sizeof(int) - 1)) + +#define ARCH_DMA_MINALIGN L1_CACHE_BYTES +#define ARCH_SLAB_MINALIGN L1_CACHE_BYTES + +/* + * This is the granularity of hardware cacheability control. + */ +#define CACHEABILITY_ALIGN 0x01000000 + +/* + * Align a physical address to MAR regions + */ +#define CACHE_REGION_START(v) \ + (((u32) (v)) & ~(CACHEABILITY_ALIGN - 1)) +#define CACHE_REGION_END(v) \ + (((u32) (v) + (CACHEABILITY_ALIGN - 1)) & ~(CACHEABILITY_ALIGN - 1)) + +extern void __init c6x_cache_init(void); + +extern void enable_caching(unsigned long start, unsigned long end); +extern void disable_caching(unsigned long start, unsigned long end); + +extern void L1_cache_off(void); +extern void L1_cache_on(void); + +extern void L1P_cache_global_invalidate(void); +extern void L1D_cache_global_invalidate(void); +extern void L1D_cache_global_writeback(void); +extern void L1D_cache_global_writeback_invalidate(void); +extern void L2_cache_set_mode(unsigned int mode); +extern void L2_cache_global_writeback_invalidate(void); +extern void L2_cache_global_writeback(void); + +extern void L1P_cache_block_invalidate(unsigned int start, unsigned int end); +extern void L1D_cache_block_invalidate(unsigned int start, unsigned int end); +extern void L1D_cache_block_writeback_invalidate(unsigned int start, + unsigned int end); +extern void L1D_cache_block_writeback(unsigned int start, unsigned int end); +extern void L2_cache_block_invalidate(unsigned int start, unsigned int end); +extern void L2_cache_block_writeback(unsigned int start, unsigned int end); +extern void L2_cache_block_writeback_invalidate(unsigned int start, + unsigned int end); +extern void L2_cache_block_invalidate_nowait(unsigned int start, + unsigned int end); +extern void L2_cache_block_writeback_nowait(unsigned int start, + unsigned int end); + +extern void L2_cache_block_writeback_invalidate_nowait(unsigned int start, + unsigned int end); + +#endif /* _ASM_C6X_CACHE_H */ diff --git a/arch/c6x/include/asm/cacheflush.h b/arch/c6x/include/asm/cacheflush.h new file mode 100644 index 000000000000..df5db90dbe56 --- /dev/null +++ b/arch/c6x/include/asm/cacheflush.h @@ -0,0 +1,65 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_CACHEFLUSH_H +#define _ASM_C6X_CACHEFLUSH_H + +#include <linux/spinlock.h> + +#include <asm/setup.h> +#include <asm/cache.h> +#include <asm/mman.h> +#include <asm/page.h> +#include <asm/string.h> + +/* + * virtually-indexed cache management (our cache is physically indexed) + */ +#define flush_cache_all() do {} while (0) +#define flush_cache_mm(mm) do {} while (0) +#define flush_cache_dup_mm(mm) do {} while (0) +#define flush_cache_range(mm, start, end) do {} while (0) +#define flush_cache_page(vma, vmaddr, pfn) do {} while (0) +#define flush_cache_vmap(start, end) do {} while (0) +#define flush_cache_vunmap(start, end) do {} while (0) +#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 +#define flush_dcache_page(page) do {} while (0) +#define flush_dcache_mmap_lock(mapping) do {} while (0) +#define flush_dcache_mmap_unlock(mapping) do {} while (0) + +/* + * physically-indexed cache management + */ +#define flush_icache_range(s, e) \ +do { \ + L1D_cache_block_writeback((s), (e)); \ + L1P_cache_block_invalidate((s), (e)); \ +} while (0) + +#define flush_icache_page(vma, page) \ +do { \ + if ((vma)->vm_flags & PROT_EXEC) \ + L1D_cache_block_writeback_invalidate(page_address(page), \ + (unsigned long) page_address(page) + PAGE_SIZE)); \ + L1P_cache_block_invalidate(page_address(page), \ + (unsigned long) page_address(page) + PAGE_SIZE)); \ +} while (0) + + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ +do { \ + memcpy(dst, src, len); \ + flush_icache_range((unsigned) (dst), (unsigned) (dst) + (len)); \ +} while (0) + +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + +#endif /* _ASM_C6X_CACHEFLUSH_H */ diff --git a/arch/c6x/include/asm/checksum.h b/arch/c6x/include/asm/checksum.h new file mode 100644 index 000000000000..7246816d6e4d --- /dev/null +++ b/arch/c6x/include/asm/checksum.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated + * Author: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_CHECKSUM_H +#define _ASM_C6X_CHECKSUM_H + +static inline __wsum +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + unsigned long long tmp; + + asm ("add .d1 %1,%5,%1\n" + "|| addu .l1 %3,%4,%0\n" + "addu .l1 %2,%0,%0\n" +#ifndef CONFIG_CPU_BIG_ENDIAN + "|| shl .s1 %1,8,%1\n" +#endif + "addu .l1 %1,%0,%0\n" + "add .l1 %P0,%p0,%2\n" + : "=&a"(tmp), "+a"(len), "+a"(sum) + : "a" (saddr), "a" (daddr), "a" (proto)); + return sum; +} +#define csum_tcpudp_nofold csum_tcpudp_nofold + +#include <asm-generic/checksum.h> + +#endif /* _ASM_C6X_CHECKSUM_H */ diff --git a/arch/c6x/include/asm/clkdev.h b/arch/c6x/include/asm/clkdev.h new file mode 100644 index 000000000000..76a070b1c2e5 --- /dev/null +++ b/arch/c6x/include/asm/clkdev.h @@ -0,0 +1,22 @@ +#ifndef _ASM_CLKDEV_H +#define _ASM_CLKDEV_H + +#include <linux/slab.h> + +struct clk; + +static inline int __clk_get(struct clk *clk) +{ + return 1; +} + +static inline void __clk_put(struct clk *clk) +{ +} + +static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size) +{ + return kzalloc(size, GFP_KERNEL); +} + +#endif /* _ASM_CLKDEV_H */ diff --git a/arch/c6x/include/asm/clock.h b/arch/c6x/include/asm/clock.h new file mode 100644 index 000000000000..bcf42b2b4b1e --- /dev/null +++ b/arch/c6x/include/asm/clock.h @@ -0,0 +1,148 @@ +/* + * TI C64X clock definitions + * + * Copyright (C) 2010, 2011 Texas Instruments. + * Contributed by: Mark Salter <msalter@redhat.com> + * + * Copied heavily from arm/mach-davinci/clock.h, so: + * + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _ASM_C6X_CLOCK_H +#define _ASM_C6X_CLOCK_H + +#ifndef __ASSEMBLER__ + +#include <linux/list.h> + +/* PLL/Reset register offsets */ +#define PLLCTL 0x100 +#define PLLM 0x110 +#define PLLPRE 0x114 +#define PLLDIV1 0x118 +#define PLLDIV2 0x11c +#define PLLDIV3 0x120 +#define PLLPOST 0x128 +#define PLLCMD 0x138 +#define PLLSTAT 0x13c +#define PLLALNCTL 0x140 +#define PLLDCHANGE 0x144 +#define PLLCKEN 0x148 +#define PLLCKSTAT 0x14c +#define PLLSYSTAT 0x150 +#define PLLDIV4 0x160 +#define PLLDIV5 0x164 +#define PLLDIV6 0x168 +#define PLLDIV7 0x16c +#define PLLDIV8 0x170 +#define PLLDIV9 0x174 +#define PLLDIV10 0x178 +#define PLLDIV11 0x17c +#define PLLDIV12 0x180 +#define PLLDIV13 0x184 +#define PLLDIV14 0x188 +#define PLLDIV15 0x18c +#define PLLDIV16 0x190 + +/* PLLM register bits */ +#define PLLM_PLLM_MASK 0xff +#define PLLM_VAL(x) ((x) - 1) + +/* PREDIV register bits */ +#define PLLPREDIV_EN BIT(15) +#define PLLPREDIV_VAL(x) ((x) - 1) + +/* PLLCTL register bits */ +#define PLLCTL_PLLEN BIT(0) +#define PLLCTL_PLLPWRDN BIT(1) +#define PLLCTL_PLLRST BIT(3) +#define PLLCTL_PLLDIS BIT(4) +#define PLLCTL_PLLENSRC BIT(5) +#define PLLCTL_CLKMODE BIT(8) + +/* PLLCMD register bits */ +#define PLLCMD_GOSTAT BIT(0) + +/* PLLSTAT register bits */ +#define PLLSTAT_GOSTAT BIT(0) + +/* PLLDIV register bits */ +#define PLLDIV_EN BIT(15) +#define PLLDIV_RATIO_MASK 0x1f +#define PLLDIV_RATIO(x) ((x) - 1) + +struct pll_data; + +struct clk { + struct list_head node; + struct module *owner; + const char *name; + unsigned long rate; + int usecount; + u32 flags; + struct clk *parent; + struct list_head children; /* list of children */ + struct list_head childnode; /* parent's child list node */ + struct pll_data *pll_data; + u32 div; + unsigned long (*recalc) (struct clk *); + int (*set_rate) (struct clk *clk, unsigned long rate); + int (*round_rate) (struct clk *clk, unsigned long rate); +}; + +/* Clock flags: SoC-specific flags start at BIT(16) */ +#define ALWAYS_ENABLED BIT(1) +#define CLK_PLL BIT(2) /* PLL-derived clock */ +#define PRE_PLL BIT(3) /* source is before PLL mult/div */ +#define FIXED_DIV_PLL BIT(4) /* fixed divisor from PLL */ +#define FIXED_RATE_PLL BIT(5) /* fixed ouput rate PLL */ + +#define MAX_PLL_SYSCLKS 16 + +struct pll_data { + void __iomem *base; + u32 num; + u32 flags; + u32 input_rate; + u32 bypass_delay; /* in loops */ + u32 reset_delay; /* in loops */ + u32 lock_delay; /* in loops */ + struct clk sysclks[MAX_PLL_SYSCLKS + 1]; +}; + +/* pll_data flag bit */ +#define PLL_HAS_PRE BIT(0) +#define PLL_HAS_MUL BIT(1) +#define PLL_HAS_POST BIT(2) + +#define CLK(dev, con, ck) \ + { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + } \ + +extern void c6x_clks_init(struct clk_lookup *clocks); +extern int clk_register(struct clk *clk); +extern void clk_unregister(struct clk *clk); +extern void c64x_setup_clocks(void); + +extern struct pll_data c6x_soc_pll1; + +extern struct clk clkin1; +extern struct clk c6x_core_clk; +extern struct clk c6x_i2c_clk; +extern struct clk c6x_watchdog_clk; +extern struct clk c6x_mcbsp1_clk; +extern struct clk c6x_mcbsp2_clk; +extern struct clk c6x_mdio_clk; + +#endif + +#endif /* _ASM_C6X_CLOCK_H */ diff --git a/arch/c6x/include/asm/delay.h b/arch/c6x/include/asm/delay.h new file mode 100644 index 000000000000..f314c2e9eb54 --- /dev/null +++ b/arch/c6x/include/asm/delay.h @@ -0,0 +1,67 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_DELAY_H +#define _ASM_C6X_DELAY_H + +#include <linux/kernel.h> + +extern unsigned int ticks_per_ns_scaled; + +static inline void __delay(unsigned long loops) +{ + uint32_t tmp; + + /* 6 cycles per loop */ + asm volatile (" mv .s1 %0,%1\n" + "0: [%1] b .s1 0b\n" + " add .l1 -6,%0,%0\n" + " cmplt .l1 1,%0,%1\n" + " nop 3\n" + : "+a"(loops), "=A"(tmp)); +} + +static inline void _c6x_tickdelay(unsigned int x) +{ + uint32_t cnt, endcnt; + + asm volatile (" mvc .s2 TSCL,%0\n" + " add .s2x %0,%1,%2\n" + " || mvk .l2 1,B0\n" + "0: [B0] b .s2 0b\n" + " mvc .s2 TSCL,%0\n" + " sub .s2 %0,%2,%0\n" + " cmpgt .l2 0,%0,B0\n" + " nop 2\n" + : "=b"(cnt), "+a"(x), "=b"(endcnt) : : "B0"); +} + +/* use scaled math to avoid slow division */ +#define C6X_NDELAY_SCALE 10 + +static inline void _ndelay(unsigned int n) +{ + _c6x_tickdelay((ticks_per_ns_scaled * n) >> C6X_NDELAY_SCALE); +} + +static inline void _udelay(unsigned int n) +{ + while (n >= 10) { + _ndelay(10000); + n -= 10; + } + while (n-- > 0) + _ndelay(1000); +} + +#define udelay(x) _udelay((unsigned int)(x)) +#define ndelay(x) _ndelay((unsigned int)(x)) + +#endif /* _ASM_C6X_DELAY_H */ diff --git a/arch/c6x/include/asm/dma-mapping.h b/arch/c6x/include/asm/dma-mapping.h new file mode 100644 index 000000000000..03579fd99dba --- /dev/null +++ b/arch/c6x/include/asm/dma-mapping.h @@ -0,0 +1,91 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot <aurelien.jacquiot@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef _ASM_C6X_DMA_MAPPING_H +#define _ASM_C6X_DMA_MAPPING_H + +#include <linux/dma-debug.h> +#include <asm-generic/dma-coherent.h> + +#define dma_supported(d, m) 1 + +static inline int dma_set_mask(struct device *dev, u64 dma_mask) +{ + if (!dev->dma_mask || !dma_supported(dev, dma_mask)) + return -EIO; + + *dev->dma_mask = dma_mask; + + return 0; +} + +/* + * DMA errors are defined by all-bits-set in the DMA address. + */ +static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return dma_addr == ~0; +} + +extern dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, + size_t size, enum dma_data_direction dir); + +extern void dma_unmap_single(struct device *dev, dma_addr_t handle, + size_t size, enum dma_data_direction dir); + +extern int dma_map_sg(struct device *dev, struct scatterlist *sglist, + int nents, enum dma_data_direction direction); + +extern void dma_unmap_sg(struct device *dev, struct scatterlist *sglist, + int nents, enum dma_data_direction direction); + +static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir) +{ + dma_addr_t handle; + + handle = dma_map_single(dev, page_address(page) + offset, size, dir); + + debug_dma_map_page(dev, page, offset, size, dir, handle, false); + + return handle; +} + +static inline void dma_unmap_page(struct device *dev, dma_addr_t handle, + size_t size, enum dma_data_direction dir) +{ + dma_unmap_single(dev, handle, size, dir); + + debug_dma_unmap_page(dev, handle, size, dir, false); +} + +extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, + size_t size, enum dma_data_direction dir); + +extern void dma_sync_single_for_device(struct device *dev, dma_addr_t handle, + size_t size, + enum dma_data_direction dir); + +extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir); + +extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir); + +extern void coherent_mem_init(u32 start, u32 size); +extern void *dma_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t); +extern void dma_free_coherent(struct device *, size_t, void *, dma_addr_t); + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f)) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent((d), (s), (v), (h)) + +#endif /* _ASM_C6X_DMA_MAPPING_H */ diff --git a/arch/c6x/include/asm/dscr.h b/arch/c6x/include/asm/dscr.h new file mode 100644 index 000000000000..561ba8332042 --- /dev/null +++ b/arch/c6x/include/asm/dscr.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated + * Author: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef _ASM_C6X_DSCR_H +#define _ASM_C6X_DSCR_H + +enum dscr_devstate_t { + DSCR_DEVSTATE_ENABLED, + DSCR_DEVSTATE_DISABLED, +}; + +/* + * Set the device state of the device with the given ID. + * + * Individual drivers should use this to enable or disable the + * hardware device. The devid used to identify the device being + * controlled should be a property in the device's tree node. + */ +extern void dscr_set_devstate(int devid, enum dscr_devstate_t state); + +/* + * Assert or de-assert an RMII reset. + */ +extern void dscr_rmii_reset(int id, int assert); + +extern void dscr_probe(void); + +#endif /* _ASM_C6X_DSCR_H */ diff --git a/arch/c6x/include/asm/elf.h b/arch/c6x/include/asm/elf.h new file mode 100644 index 000000000000..d57865ba2c44 --- /dev/null +++ b/arch/c6x/include/asm/elf.h @@ -0,0 +1,113 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_ELF_H +#define _ASM_C6X_ELF_H + +/* + * ELF register definitions.. + */ +#include <asm/ptrace.h> + +typedef unsigned long elf_greg_t; +typedef unsigned long elf_fpreg_t; + +#define ELF_NGREG 58 +#define ELF_NFPREG 1 + +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; +typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_TI_C6000) + +#define elf_check_const_displacement(x) (1) + +/* + * These are used to set parameters in the core dumps. + */ +#ifdef __LITTLE_ENDIAN__ +#define ELF_DATA ELFDATA2LSB +#else +#define ELF_DATA ELFDATA2MSB +#endif + +#define ELF_CLASS ELFCLASS32 +#define ELF_ARCH EM_TI_C6000 + +/* Nothing for now. Need to setup DP... */ +#define ELF_PLAT_INIT(_r) + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE 4096 + +#define ELF_CORE_COPY_REGS(_dest, _regs) \ + memcpy((char *) &_dest, (char *) _regs, \ + sizeof(struct pt_regs)); + +/* This yields a mask that user programs can use to figure out what + instruction set this cpu supports. */ + +#define ELF_HWCAP (0) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ + +#define ELF_PLATFORM (NULL) + +#define SET_PERSONALITY(ex) set_personality(PER_LINUX) + +/* C6X specific section types */ +#define SHT_C6000_UNWIND 0x70000001 +#define SHT_C6000_PREEMPTMAP 0x70000002 +#define SHT_C6000_ATTRIBUTES 0x70000003 + +/* C6X specific DT_ tags */ +#define DT_C6000_DSBT_BASE 0x70000000 +#define DT_C6000_DSBT_SIZE 0x70000001 +#define DT_C6000_PREEMPTMAP 0x70000002 +#define DT_C6000_DSBT_INDEX 0x70000003 + +/* C6X specific relocs */ +#define R_C6000_NONE 0 +#define R_C6000_ABS32 1 +#define R_C6000_ABS16 2 +#define R_C6000_ABS8 3 +#define R_C6000_PCR_S21 4 +#define R_C6000_PCR_S12 5 +#define R_C6000_PCR_S10 6 +#define R_C6000_PCR_S7 7 +#define R_C6000_ABS_S16 8 +#define R_C6000_ABS_L16 9 +#define R_C6000_ABS_H16 10 +#define R_C6000_SBR_U15_B 11 +#define R_C6000_SBR_U15_H 12 +#define R_C6000_SBR_U15_W 13 +#define R_C6000_SBR_S16 14 +#define R_C6000_SBR_L16_B 15 +#define R_C6000_SBR_L16_H 16 +#define R_C6000_SBR_L16_W 17 +#define R_C6000_SBR_H16_B 18 +#define R_C6000_SBR_H16_H 19 +#define R_C6000_SBR_H16_W 20 +#define R_C6000_SBR_GOT_U15_W 21 +#define R_C6000_SBR_GOT_L16_W 22 +#define R_C6000_SBR_GOT_H16_W 23 +#define R_C6000_DSBT_INDEX 24 +#define R_C6000_PREL31 25 +#define R_C6000_COPY 26 +#define R_C6000_ALIGN 253 +#define R_C6000_FPHEAD 254 +#define R_C6000_NOCMP 255 + +#endif /*_ASM_C6X_ELF_H */ diff --git a/arch/c6x/include/asm/ftrace.h b/arch/c6x/include/asm/ftrace.h new file mode 100644 index 000000000000..3701958d3d1c --- /dev/null +++ b/arch/c6x/include/asm/ftrace.h @@ -0,0 +1,6 @@ +#ifndef _ASM_C6X_FTRACE_H +#define _ASM_C6X_FTRACE_H + +/* empty */ + +#endif /* _ASM_C6X_FTRACE_H */ diff --git a/arch/c6x/include/asm/hardirq.h b/arch/c6x/include/asm/hardirq.h new file mode 100644 index 000000000000..9621954f98f4 --- /dev/null +++ b/arch/c6x/include/asm/hardirq.h @@ -0,0 +1,20 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _ASM_C6X_HARDIRQ_H +#define _ASM_C6X_HARDIRQ_H + +extern void ack_bad_irq(int irq); +#define ack_bad_irq ack_bad_irq + +#include <asm-generic/hardirq.h> + +#endif /* _ASM_C6X_HARDIRQ_H */ diff --git a/arch/c6x/include/asm/irq.h b/arch/c6x/include/asm/irq.h new file mode 100644 index 000000000000..a6ae3c9d9c40 --- /dev/null +++ b/arch/c6x/include/asm/irq.h @@ -0,0 +1,302 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2006, 2009, 2010, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * Large parts taken directly from powerpc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_IRQ_H +#define _ASM_C6X_IRQ_H + +#include <linux/threads.h> +#include <linux/list.h> +#include <linux/radix-tree.h> +#include <asm/percpu.h> + +#define irq_canonicalize(irq) (irq) + +/* + * The C64X+ core has 16 IRQ vectors. One each is used by Reset and NMI. Two + * are reserved. The remaining 12 vectors are used to route SoC interrupts. + * These interrupt vectors are prioritized with IRQ 4 having the highest + * priority and IRQ 15 having the lowest. + * + * The C64x+ megamodule provides a PIC which combines SoC IRQ sources into a + * single core IRQ vector. There are four combined sources, each of which + * feed into one of the 12 general interrupt vectors. The remaining 8 vectors + * can each route a single SoC interrupt directly. + */ +#define NR_PRIORITY_IRQS 16 + +#define NR_IRQS_LEGACY NR_PRIORITY_IRQS + +/* Total number of virq in the platform */ +#define NR_IRQS 256 + +/* This number is used when no interrupt has been assigned */ +#define NO_IRQ 0 + +/* This type is the placeholder for a hardware interrupt number. It has to + * be big enough to enclose whatever representation is used by a given + * platform. + */ +typedef unsigned long irq_hw_number_t; + +/* Interrupt controller "host" data structure. This could be defined as a + * irq domain controller. That is, it handles the mapping between hardware + * and virtual interrupt numbers for a given interrupt domain. The host + * structure is generally created by the PIC code for a given PIC instance + * (though a host can cover more than one PIC if they have a flat number + * model). It's the host callbacks that are responsible for setting the + * irq_chip on a given irq_desc after it's been mapped. + * + * The host code and data structures are fairly agnostic to the fact that + * we use an open firmware device-tree. We do have references to struct + * device_node in two places: in irq_find_host() to find the host matching + * a given interrupt controller node, and of course as an argument to its + * counterpart host->ops->match() callback. However, those are treated as + * generic pointers by the core and the fact that it's actually a device-node + * pointer is purely a convention between callers and implementation. This + * code could thus be used on other architectures by replacing those two + * by some sort of arch-specific void * "token" used to identify interrupt + * controllers. + */ +struct irq_host; +struct radix_tree_root; +struct device_node; + +/* Functions below are provided by the host and called whenever a new mapping + * is created or an old mapping is disposed. The host can then proceed to + * whatever internal data structures management is required. It also needs + * to setup the irq_desc when returning from map(). + */ +struct irq_host_ops { + /* Match an interrupt controller device node to a host, returns + * 1 on a match + */ + int (*match)(struct irq_host *h, struct device_node *node); + + /* Create or update a mapping between a virtual irq number and a hw + * irq number. This is called only once for a given mapping. + */ + int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw); + + /* Dispose of such a mapping */ + void (*unmap)(struct irq_host *h, unsigned int virq); + + /* Translate device-tree interrupt specifier from raw format coming + * from the firmware to a irq_hw_number_t (interrupt line number) and + * type (sense) that can be passed to set_irq_type(). In the absence + * of this callback, irq_create_of_mapping() and irq_of_parse_and_map() + * will return the hw number in the first cell and IRQ_TYPE_NONE for + * the type (which amount to keeping whatever default value the + * interrupt controller has for that line) + */ + int (*xlate)(struct irq_host *h, struct device_node *ctrler, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_type); +}; + +struct irq_host { + struct list_head link; + + /* type of reverse mapping technique */ + unsigned int revmap_type; +#define IRQ_HOST_MAP_PRIORITY 0 /* core priority irqs, get irqs 1..15 */ +#define IRQ_HOST_MAP_NOMAP 1 /* no fast reverse mapping */ +#define IRQ_HOST_MAP_LINEAR 2 /* linear map of interrupts */ +#define IRQ_HOST_MAP_TREE 3 /* radix tree */ + union { + struct { + unsigned int size; + unsigned int *revmap; + } linear; + struct radix_tree_root tree; + } revmap_data; + struct irq_host_ops *ops; + void *host_data; + irq_hw_number_t inval_irq; + + /* Optional device node pointer */ + struct device_node *of_node; +}; + +struct irq_data; +extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d); +extern irq_hw_number_t virq_to_hw(unsigned int virq); +extern bool virq_is_host(unsigned int virq, struct irq_host *host); + +/** + * irq_alloc_host - Allocate a new irq_host data structure + * @of_node: optional device-tree node of the interrupt controller + * @revmap_type: type of reverse mapping to use + * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map + * @ops: map/unmap host callbacks + * @inval_irq: provide a hw number in that host space that is always invalid + * + * Allocates and initialize and irq_host structure. Note that in the case of + * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns + * for all legacy interrupts except 0 (which is always the invalid irq for + * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by + * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated + * later during boot automatically (the reverse mapping will use the slow path + * until that happens). + */ +extern struct irq_host *irq_alloc_host(struct device_node *of_node, + unsigned int revmap_type, + unsigned int revmap_arg, + struct irq_host_ops *ops, + irq_hw_number_t inval_irq); + + +/** + * irq_find_host - Locates a host for a given device node + * @node: device-tree node of the interrupt controller + */ +extern struct irq_host *irq_find_host(struct device_node *node); + + +/** + * irq_set_default_host - Set a "default" host + * @host: default host pointer + * + * For convenience, it's possible to set a "default" host that will be used + * whenever NULL is passed to irq_create_mapping(). It makes life easier for + * platforms that want to manipulate a few hard coded interrupt numbers that + * aren't properly represented in the device-tree. + */ +extern void irq_set_default_host(struct irq_host *host); + + +/** + * irq_set_virq_count - Set the maximum number of virt irqs + * @count: number of linux virtual irqs, capped with NR_IRQS + * + * This is mainly for use by platforms like iSeries who want to program + * the virtual irq number in the controller to avoid the reverse mapping + */ +extern void irq_set_virq_count(unsigned int count); + + +/** + * irq_create_mapping - Map a hardware interrupt into linux virq space + * @host: host owning this hardware interrupt or NULL for default host + * @hwirq: hardware irq number in that host space + * + * Only one mapping per hardware interrupt is permitted. Returns a linux + * virq number. + * If the sense/trigger is to be specified, set_irq_type() should be called + * on the number returned from that call. + */ +extern unsigned int irq_create_mapping(struct irq_host *host, + irq_hw_number_t hwirq); + + +/** + * irq_dispose_mapping - Unmap an interrupt + * @virq: linux virq number of the interrupt to unmap + */ +extern void irq_dispose_mapping(unsigned int virq); + +/** + * irq_find_mapping - Find a linux virq from an hw irq number. + * @host: host owning this hardware interrupt + * @hwirq: hardware irq number in that host space + * + * This is a slow path, for use by generic code. It's expected that an + * irq controller implementation directly calls the appropriate low level + * mapping function. + */ +extern unsigned int irq_find_mapping(struct irq_host *host, + irq_hw_number_t hwirq); + +/** + * irq_create_direct_mapping - Allocate a virq for direct mapping + * @host: host to allocate the virq for or NULL for default host + * + * This routine is used for irq controllers which can choose the hardware + * interrupt numbers they generate. In such a case it's simplest to use + * the linux virq as the hardware interrupt number. + */ +extern unsigned int irq_create_direct_mapping(struct irq_host *host); + +/** + * irq_radix_revmap_insert - Insert a hw irq to linux virq number mapping. + * @host: host owning this hardware interrupt + * @virq: linux irq number + * @hwirq: hardware irq number in that host space + * + * This is for use by irq controllers that use a radix tree reverse + * mapping for fast lookup. + */ +extern void irq_radix_revmap_insert(struct irq_host *host, unsigned int virq, + irq_hw_number_t hwirq); + +/** + * irq_radix_revmap_lookup - Find a linux virq from a hw irq number. + * @host: host owning this hardware interrupt + * @hwirq: hardware irq number in that host space + * + * This is a fast path, for use by irq controller code that uses radix tree + * revmaps + */ +extern unsigned int irq_radix_revmap_lookup(struct irq_host *host, + irq_hw_number_t hwirq); + +/** + * irq_linear_revmap - Find a linux virq from a hw irq number. + * @host: host owning this hardware interrupt + * @hwirq: hardware irq number in that host space + * + * This is a fast path, for use by irq controller code that uses linear + * revmaps. It does fallback to the slow path if the revmap doesn't exist + * yet and will create the revmap entry with appropriate locking + */ + +extern unsigned int irq_linear_revmap(struct irq_host *host, + irq_hw_number_t hwirq); + + + +/** + * irq_alloc_virt - Allocate virtual irq numbers + * @host: host owning these new virtual irqs + * @count: number of consecutive numbers to allocate + * @hint: pass a hint number, the allocator will try to use a 1:1 mapping + * + * This is a low level function that is used internally by irq_create_mapping() + * and that can be used by some irq controllers implementations for things + * like allocating ranges of numbers for MSIs. The revmaps are left untouched. + */ +extern unsigned int irq_alloc_virt(struct irq_host *host, + unsigned int count, + unsigned int hint); + +/** + * irq_free_virt - Free virtual irq numbers + * @virq: virtual irq number of the first interrupt to free + * @count: number of interrupts to free + * + * This function is the opposite of irq_alloc_virt. It will not clear reverse + * maps, this should be done previously by unmap'ing the interrupt. In fact, + * all interrupts covered by the range being freed should have been unmapped + * prior to calling this. + */ +extern void irq_free_virt(unsigned int virq, unsigned int count); + +extern void __init init_pic_c64xplus(void); + +extern void init_IRQ(void); + +struct pt_regs; + +extern asmlinkage void c6x_do_IRQ(unsigned int prio, struct pt_regs *regs); + +extern unsigned long irq_err_count; + +#endif /* _ASM_C6X_IRQ_H */ diff --git a/arch/c6x/include/asm/irqflags.h b/arch/c6x/include/asm/irqflags.h new file mode 100644 index 000000000000..cf78e09e18c3 --- /dev/null +++ b/arch/c6x/include/asm/irqflags.h @@ -0,0 +1,72 @@ +/* + * C6X IRQ flag handling + * + * Copyright (C) 2010 Texas Instruments Incorporated + * Written by Mark Salter (msalter@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_IRQFLAGS_H +#define _ASM_IRQFLAGS_H + +#ifndef __ASSEMBLY__ + +/* read interrupt enabled status */ +static inline unsigned long arch_local_save_flags(void) +{ + unsigned long flags; + + asm volatile (" mvc .s2 CSR,%0\n" : "=b"(flags)); + return flags; +} + +/* set interrupt enabled status */ +static inline void arch_local_irq_restore(unsigned long flags) +{ + asm volatile (" mvc .s2 %0,CSR\n" : : "b"(flags)); +} + +/* unconditionally enable interrupts */ +static inline void arch_local_irq_enable(void) +{ + unsigned long flags = arch_local_save_flags(); + flags |= 1; + arch_local_irq_restore(flags); +} + +/* unconditionally disable interrupts */ +static inline void arch_local_irq_disable(void) +{ + unsigned long flags = arch_local_save_flags(); + flags &= ~1; + arch_local_irq_restore(flags); +} + +/* get status and disable interrupts */ +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags; + + flags = arch_local_save_flags(); + arch_local_irq_restore(flags & ~1); + return flags; +} + +/* test flags */ +static inline int arch_irqs_disabled_flags(unsigned long flags) +{ + return (flags & 1) == 0; +} + +/* test hardware interrupt enable bit */ +static inline int arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_IRQFLAGS_H */ diff --git a/arch/c6x/include/asm/linkage.h b/arch/c6x/include/asm/linkage.h new file mode 100644 index 000000000000..376925c47d57 --- /dev/null +++ b/arch/c6x/include/asm/linkage.h @@ -0,0 +1,30 @@ +#ifndef _ASM_C6X_LINKAGE_H +#define _ASM_C6X_LINKAGE_H + +#ifdef __ASSEMBLER__ + +#define __ALIGN .align 2 +#define __ALIGN_STR ".align 2" + +#ifndef __DSBT__ +#define ENTRY(name) \ + .global name @ \ + __ALIGN @ \ +name: +#else +#define ENTRY(name) \ + .global name @ \ + .hidden name @ \ + __ALIGN @ \ +name: +#endif + +#define ENDPROC(name) \ + .type name, @function @ \ + .size name, . - name + +#endif + +#include <asm-generic/linkage.h> + +#endif /* _ASM_C6X_LINKAGE_H */ diff --git a/arch/c6x/include/asm/megamod-pic.h b/arch/c6x/include/asm/megamod-pic.h new file mode 100644 index 000000000000..eca0a8678034 --- /dev/null +++ b/arch/c6x/include/asm/megamod-pic.h @@ -0,0 +1,9 @@ +#ifndef _C6X_MEGAMOD_PIC_H +#define _C6X_MEGAMOD_PIC_H + +#ifdef __KERNEL__ + +extern void __init megamod_pic_init(void); + +#endif /* __KERNEL__ */ +#endif /* _C6X_MEGAMOD_PIC_H */ diff --git a/arch/c6x/include/asm/mmu.h b/arch/c6x/include/asm/mmu.h new file mode 100644 index 000000000000..41592bf16067 --- /dev/null +++ b/arch/c6x/include/asm/mmu.h @@ -0,0 +1,18 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_MMU_H +#define _ASM_C6X_MMU_H + +typedef struct { + unsigned long end_brk; +} mm_context_t; + +#endif /* _ASM_C6X_MMU_H */ diff --git a/arch/c6x/include/asm/module.h b/arch/c6x/include/asm/module.h new file mode 100644 index 000000000000..a453f9744f42 --- /dev/null +++ b/arch/c6x/include/asm/module.h @@ -0,0 +1,33 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * Updated for 2.6.34 by: Mark Salter (msalter@redhat.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_MODULE_H +#define _ASM_C6X_MODULE_H + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr +#define Elf_Addr Elf32_Addr +#define Elf_Word Elf32_Word + +/* + * This file contains the C6x architecture specific module code. + */ +struct mod_arch_specific { +}; + +struct loaded_sections { + unsigned int new_vaddr; + unsigned int loaded; +}; + +#endif /* _ASM_C6X_MODULE_H */ diff --git a/arch/c6x/include/asm/mutex.h b/arch/c6x/include/asm/mutex.h new file mode 100644 index 000000000000..7a7248e0462d --- /dev/null +++ b/arch/c6x/include/asm/mutex.h @@ -0,0 +1,6 @@ +#ifndef _ASM_C6X_MUTEX_H +#define _ASM_C6X_MUTEX_H + +#include <asm-generic/mutex-null.h> + +#endif /* _ASM_C6X_MUTEX_H */ diff --git a/arch/c6x/include/asm/page.h b/arch/c6x/include/asm/page.h new file mode 100644 index 000000000000..d18e2b0c7aea --- /dev/null +++ b/arch/c6x/include/asm/page.h @@ -0,0 +1,11 @@ +#ifndef _ASM_C6X_PAGE_H +#define _ASM_C6X_PAGE_H + +#define VM_DATA_DEFAULT_FLAGS \ + (VM_READ | VM_WRITE | \ + ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#include <asm-generic/page.h> + +#endif /* _ASM_C6X_PAGE_H */ diff --git a/arch/c6x/include/asm/pgtable.h b/arch/c6x/include/asm/pgtable.h new file mode 100644 index 000000000000..68c8af4f1f97 --- /dev/null +++ b/arch/c6x/include/asm/pgtable.h @@ -0,0 +1,81 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_PGTABLE_H +#define _ASM_C6X_PGTABLE_H + +#include <asm-generic/4level-fixup.h> + +#include <asm/setup.h> +#include <asm/page.h> + +/* + * All 32bit addresses are effectively valid for vmalloc... + * Sort of meaningless for non-VM targets. + */ +#define VMALLOC_START 0 +#define VMALLOC_END 0xffffffff + +#define pgd_present(pgd) (1) +#define pgd_none(pgd) (0) +#define pgd_bad(pgd) (0) +#define pgd_clear(pgdp) +#define kern_addr_valid(addr) (1) + +#define pmd_offset(a, b) ((void *)0) +#define pmd_none(x) (!pmd_val(x)) +#define pmd_present(x) (pmd_val(x)) +#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) +#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK) + +#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */ +#define pgprot_noncached(prot) (prot) + +extern void paging_init(void); + +#define __swp_type(x) (0) +#define __swp_offset(x) (0) +#define __swp_entry(typ, off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +static inline int pte_file(pte_t pte) +{ + return 0; +} + +#define set_pte(pteptr, pteval) (*(pteptr) = pteval) +#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval) + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +#define ZERO_PAGE(vaddr) virt_to_page(empty_zero_page) +extern unsigned long empty_zero_page; + +#define swapper_pg_dir ((pgd_t *) 0) + +/* + * No page table caches to initialise + */ +#define pgtable_cache_init() do { } while (0) +#define io_remap_pfn_range remap_pfn_range + +#define io_remap_page_range(vma, vaddr, paddr, size, prot) \ + remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot) + +#include <asm-generic/pgtable.h> + +#endif /* _ASM_C6X_PGTABLE_H */ diff --git a/arch/c6x/include/asm/processor.h b/arch/c6x/include/asm/processor.h new file mode 100644 index 000000000000..8154c4ee8c9c --- /dev/null +++ b/arch/c6x/include/asm/processor.h @@ -0,0 +1,132 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * Updated for 2.6.34: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_PROCESSOR_H +#define _ASM_C6X_PROCESSOR_H + +#include <asm/ptrace.h> +#include <asm/page.h> +#include <asm/current.h> + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() \ +({ \ + void *__pc; \ + asm("mvc .S2 pce1,%0\n" : "=b"(__pc)); \ + __pc; \ +}) + +/* + * User space process size. This is mostly meaningless for NOMMU + * but some C6X processors may have RAM addresses up to 0xFFFFFFFF. + * Since calls like mmap() can return an address or an error, we + * have to allow room for error returns when code does something + * like: + * + * addr = do_mmap(...) + * if ((unsigned long)addr >= TASK_SIZE) + * ... its an error code, not an address ... + * + * Here, we allow for 4096 error codes which means we really can't + * use the last 4K page on systems with RAM extending all the way + * to the end of the 32-bit address space. + */ +#define TASK_SIZE 0xFFFFF000 + +/* + * This decides where the kernel will search for a free chunk of vm + * space during mmap's. We won't be using it + */ +#define TASK_UNMAPPED_BASE 0 + +struct thread_struct { + unsigned long long b15_14; + unsigned long long a15_14; + unsigned long long b13_12; + unsigned long long a13_12; + unsigned long long b11_10; + unsigned long long a11_10; + unsigned long long ricl_icl; + unsigned long usp; /* user stack pointer */ + unsigned long pc; /* kernel pc */ + unsigned long wchan; +}; + +#define INIT_THREAD \ +{ \ + .usp = 0, \ + .wchan = 0, \ +} + +#define INIT_MMAP { \ + &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, \ + NULL, NULL } + +#define task_pt_regs(task) \ + ((struct pt_regs *)(THREAD_START_SP + task_stack_page(task)) - 1) + +#define alloc_kernel_stack() __get_free_page(GFP_KERNEL) +#define free_kernel_stack(page) free_page((page)) + + +/* Forward declaration, a strange C thing */ +struct task_struct; + +extern void start_thread(struct pt_regs *regs, unsigned int pc, + unsigned long usp); + +/* Free all resources held by a thread. */ +static inline void release_thread(struct task_struct *dead_task) +{ +} + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +#define copy_segments(tsk, mm) do { } while (0) +#define release_segments(mm) do { } while (0) + +/* + * saved PC of a blocked thread. + */ +#define thread_saved_pc(tsk) (task_pt_regs(tsk)->pc) + +/* + * saved kernel SP and DP of a blocked thread. + */ +#ifdef _BIG_ENDIAN +#define thread_saved_ksp(tsk) \ + (*(unsigned long *)&(tsk)->thread.b15_14) +#define thread_saved_dp(tsk) \ + (*(((unsigned long *)&(tsk)->thread.b15_14) + 1)) +#else +#define thread_saved_ksp(tsk) \ + (*(((unsigned long *)&(tsk)->thread.b15_14) + 1)) +#define thread_saved_dp(tsk) \ + (*(unsigned long *)&(tsk)->thread.b15_14) +#endif + +extern unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) (task_pt_regs(task)->pc) +#define KSTK_ESP(tsk) (task_pt_regs(task)->sp) + +#define cpu_relax() do { } while (0) + +extern const struct seq_operations cpuinfo_op; + +#endif /* ASM_C6X_PROCESSOR_H */ diff --git a/arch/c6x/include/asm/procinfo.h b/arch/c6x/include/asm/procinfo.h new file mode 100644 index 000000000000..c139d1e71f87 --- /dev/null +++ b/arch/c6x/include/asm/procinfo.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2010 Texas Instruments Incorporated + * Author: Mark Salter (msalter@redhat.com) + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_PROCINFO_H +#define _ASM_C6X_PROCINFO_H + +#ifdef __KERNEL__ + +struct proc_info_list { + unsigned int cpu_val; + unsigned int cpu_mask; + const char *arch_name; + const char *elf_name; + unsigned int elf_hwcap; +}; + +#else /* __KERNEL__ */ +#include <asm/elf.h> +#warning "Please include asm/elf.h instead" +#endif /* __KERNEL__ */ + +#endif /* _ASM_C6X_PROCINFO_H */ diff --git a/arch/c6x/include/asm/prom.h b/arch/c6x/include/asm/prom.h new file mode 100644 index 000000000000..b4ec95f07518 --- /dev/null +++ b/arch/c6x/include/asm/prom.h @@ -0,0 +1 @@ +/* dummy prom.h; here to make linux/of.h's #includes happy */ diff --git a/arch/c6x/include/asm/ptrace.h b/arch/c6x/include/asm/ptrace.h new file mode 100644 index 000000000000..21e8d7931fe7 --- /dev/null +++ b/arch/c6x/include/asm/ptrace.h @@ -0,0 +1,174 @@ +/* + * Copyright (C) 2004, 2006, 2009, 2010 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * Updated for 2.6.34: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_PTRACE_H +#define _ASM_C6X_PTRACE_H + +#define BKPT_OPCODE 0x56454314 /* illegal opcode */ + +#ifdef _BIG_ENDIAN +#define PT_LO(odd, even) odd +#define PT_HI(odd, even) even +#else +#define PT_LO(odd, even) even +#define PT_HI(odd, even) odd +#endif + +#define PT_A4_ORG PT_LO(1, 0) +#define PT_TSR PT_HI(1, 0) +#define PT_ILC PT_LO(3, 2) +#define PT_RILC PT_HI(3, 2) +#define PT_CSR PT_LO(5, 4) +#define PT_PC PT_HI(5, 4) +#define PT_B16 PT_LO(7, 6) +#define PT_B17 PT_HI(7, 6) +#define PT_B18 PT_LO(9, 8) +#define PT_B19 PT_HI(9, 8) +#define PT_B20 PT_LO(11, 10) +#define PT_B21 PT_HI(11, 10) +#define PT_B22 PT_LO(13, 12) +#define PT_B23 PT_HI(13, 12) +#define PT_B24 PT_LO(15, 14) +#define PT_B25 PT_HI(15, 14) +#define PT_B26 PT_LO(17, 16) +#define PT_B27 PT_HI(17, 16) +#define PT_B28 PT_LO(19, 18) +#define PT_B29 PT_HI(19, 18) +#define PT_B30 PT_LO(21, 20) +#define PT_B31 PT_HI(21, 20) +#define PT_B0 PT_LO(23, 22) +#define PT_B1 PT_HI(23, 22) +#define PT_B2 PT_LO(25, 24) +#define PT_B3 PT_HI(25, 24) +#define PT_B4 PT_LO(27, 26) +#define PT_B5 PT_HI(27, 26) +#define PT_B6 PT_LO(29, 28) +#define PT_B7 PT_HI(29, 28) +#define PT_B8 PT_LO(31, 30) +#define PT_B9 PT_HI(31, 30) +#define PT_B10 PT_LO(33, 32) +#define PT_B11 PT_HI(33, 32) +#define PT_B12 PT_LO(35, 34) +#define PT_B13 PT_HI(35, 34) +#define PT_A16 PT_LO(37, 36) +#define PT_A17 PT_HI(37, 36) +#define PT_A18 PT_LO(39, 38) +#define PT_A19 PT_HI(39, 38) +#define PT_A20 PT_LO(41, 40) +#define PT_A21 PT_HI(41, 40) +#define PT_A22 PT_LO(43, 42) +#define PT_A23 PT_HI(43, 42) +#define PT_A24 PT_LO(45, 44) +#define PT_A25 PT_HI(45, 44) +#define PT_A26 PT_LO(47, 46) +#define PT_A27 PT_HI(47, 46) +#define PT_A28 PT_LO(49, 48) +#define PT_A29 PT_HI(49, 48) +#define PT_A30 PT_LO(51, 50) +#define PT_A31 PT_HI(51, 50) +#define PT_A0 PT_LO(53, 52) +#define PT_A1 PT_HI(53, 52) +#define PT_A2 PT_LO(55, 54) +#define PT_A3 PT_HI(55, 54) +#define PT_A4 PT_LO(57, 56) +#define PT_A5 PT_HI(57, 56) +#define PT_A6 PT_LO(59, 58) +#define PT_A7 PT_HI(59, 58) +#define PT_A8 PT_LO(61, 60) +#define PT_A9 PT_HI(61, 60) +#define PT_A10 PT_LO(63, 62) +#define PT_A11 PT_HI(63, 62) +#define PT_A12 PT_LO(65, 64) +#define PT_A13 PT_HI(65, 64) +#define PT_A14 PT_LO(67, 66) +#define PT_A15 PT_HI(67, 66) +#define PT_B14 PT_LO(69, 68) +#define PT_B15 PT_HI(69, 68) + +#define NR_PTREGS 70 + +#define PT_DP PT_B14 /* Data Segment Pointer (B14) */ +#define PT_SP PT_B15 /* Stack Pointer (B15) */ + +#ifndef __ASSEMBLY__ + +#ifdef _BIG_ENDIAN +#define REG_PAIR(odd, even) unsigned long odd; unsigned long even +#else +#define REG_PAIR(odd, even) unsigned long even; unsigned long odd +#endif + +/* + * this struct defines the way the registers are stored on the + * stack during a system call. fields defined with REG_PAIR + * are saved and restored using double-word memory operations + * which means the word ordering of the pair depends on endianess. + */ +struct pt_regs { + REG_PAIR(tsr, orig_a4); + REG_PAIR(rilc, ilc); + REG_PAIR(pc, csr); + + REG_PAIR(b17, b16); + REG_PAIR(b19, b18); + REG_PAIR(b21, b20); + REG_PAIR(b23, b22); + REG_PAIR(b25, b24); + REG_PAIR(b27, b26); + REG_PAIR(b29, b28); + REG_PAIR(b31, b30); + + REG_PAIR(b1, b0); + REG_PAIR(b3, b2); + REG_PAIR(b5, b4); + REG_PAIR(b7, b6); + REG_PAIR(b9, b8); + REG_PAIR(b11, b10); + REG_PAIR(b13, b12); + + REG_PAIR(a17, a16); + REG_PAIR(a19, a18); + REG_PAIR(a21, a20); + REG_PAIR(a23, a22); + REG_PAIR(a25, a24); + REG_PAIR(a27, a26); + REG_PAIR(a29, a28); + REG_PAIR(a31, a30); + + REG_PAIR(a1, a0); + REG_PAIR(a3, a2); + REG_PAIR(a5, a4); + REG_PAIR(a7, a6); + REG_PAIR(a9, a8); + REG_PAIR(a11, a10); + REG_PAIR(a13, a12); + + REG_PAIR(a15, a14); + REG_PAIR(sp, dp); +}; + +#ifdef __KERNEL__ + +#include <linux/linkage.h> + +#define user_mode(regs) ((((regs)->tsr) & 0x40) != 0) + +#define instruction_pointer(regs) ((regs)->pc) +#define profile_pc(regs) instruction_pointer(regs) +#define user_stack_pointer(regs) ((regs)->sp) + +extern void show_regs(struct pt_regs *); + +extern asmlinkage unsigned long syscall_trace_entry(struct pt_regs *regs); +extern asmlinkage void syscall_trace_exit(struct pt_regs *regs); + +#endif /* __KERNEL__ */ +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_C6X_PTRACE_H */ diff --git a/arch/c6x/include/asm/sections.h b/arch/c6x/include/asm/sections.h new file mode 100644 index 000000000000..f703989d837a --- /dev/null +++ b/arch/c6x/include/asm/sections.h @@ -0,0 +1,12 @@ +#ifndef _ASM_C6X_SECTIONS_H +#define _ASM_C6X_SECTIONS_H + +#include <asm-generic/sections.h> + +extern char _vectors_start[]; +extern char _vectors_end[]; + +extern char _data_lma[]; +extern char _fdt_start[], _fdt_end[]; + +#endif /* _ASM_C6X_SECTIONS_H */ diff --git a/arch/c6x/include/asm/setup.h b/arch/c6x/include/asm/setup.h new file mode 100644 index 000000000000..1808f279f82e --- /dev/null +++ b/arch/c6x/include/asm/setup.h @@ -0,0 +1,32 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_SETUP_H +#define _ASM_C6X_SETUP_H + +#define COMMAND_LINE_SIZE 1024 + +#ifndef __ASSEMBLY__ +extern char c6x_command_line[COMMAND_LINE_SIZE]; + +extern int c6x_add_memory(phys_addr_t start, unsigned long size); + +extern unsigned long ram_start; +extern unsigned long ram_end; + +extern int c6x_num_cores; +extern unsigned int c6x_silicon_rev; +extern unsigned int c6x_devstat; +extern unsigned char c6x_fuse_mac[6]; + +extern void machine_init(unsigned long dt_ptr); + +#endif /* !__ASSEMBLY__ */ +#endif /* _ASM_C6X_SETUP_H */ diff --git a/arch/c6x/include/asm/sigcontext.h b/arch/c6x/include/asm/sigcontext.h new file mode 100644 index 000000000000..eb702f39cde7 --- /dev/null +++ b/arch/c6x/include/asm/sigcontext.h @@ -0,0 +1,80 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_SIGCONTEXT_H +#define _ASM_C6X_SIGCONTEXT_H + + +struct sigcontext { + unsigned long sc_mask; /* old sigmask */ + unsigned long sc_sp; /* old user stack pointer */ + + unsigned long sc_a4; + unsigned long sc_b4; + unsigned long sc_a6; + unsigned long sc_b6; + unsigned long sc_a8; + unsigned long sc_b8; + + unsigned long sc_a0; + unsigned long sc_a1; + unsigned long sc_a2; + unsigned long sc_a3; + unsigned long sc_a5; + unsigned long sc_a7; + unsigned long sc_a9; + + unsigned long sc_b0; + unsigned long sc_b1; + unsigned long sc_b2; + unsigned long sc_b3; + unsigned long sc_b5; + unsigned long sc_b7; + unsigned long sc_b9; + + unsigned long sc_a16; + unsigned long sc_a17; + unsigned long sc_a18; + unsigned long sc_a19; + unsigned long sc_a20; + unsigned long sc_a21; + unsigned long sc_a22; + unsigned long sc_a23; + unsigned long sc_a24; + unsigned long sc_a25; + unsigned long sc_a26; + unsigned long sc_a27; + unsigned long sc_a28; + unsigned long sc_a29; + unsigned long sc_a30; + unsigned long sc_a31; + + unsigned long sc_b16; + unsigned long sc_b17; + unsigned long sc_b18; + unsigned long sc_b19; + unsigned long sc_b20; + unsigned long sc_b21; + unsigned long sc_b22; + unsigned long sc_b23; + unsigned long sc_b24; + unsigned long sc_b25; + unsigned long sc_b26; + unsigned long sc_b27; + unsigned long sc_b28; + unsigned long sc_b29; + unsigned long sc_b30; + unsigned long sc_b31; + + unsigned long sc_csr; + unsigned long sc_pc; +}; + +#endif /* _ASM_C6X_SIGCONTEXT_H */ diff --git a/arch/c6x/include/asm/signal.h b/arch/c6x/include/asm/signal.h new file mode 100644 index 000000000000..f1cd870596a3 --- /dev/null +++ b/arch/c6x/include/asm/signal.h @@ -0,0 +1,17 @@ +#ifndef _ASM_C6X_SIGNAL_H +#define _ASM_C6X_SIGNAL_H + +#include <asm-generic/signal.h> + +#ifndef __ASSEMBLY__ +#include <linux/linkage.h> + +struct pt_regs; + +extern asmlinkage int do_rt_sigreturn(struct pt_regs *regs); +extern asmlinkage void do_notify_resume(struct pt_regs *regs, + u32 thread_info_flags, + int syscall); +#endif + +#endif /* _ASM_C6X_SIGNAL_H */ diff --git a/arch/c6x/include/asm/soc.h b/arch/c6x/include/asm/soc.h new file mode 100644 index 000000000000..43f50159e59b --- /dev/null +++ b/arch/c6x/include/asm/soc.h @@ -0,0 +1,35 @@ +/* + * Miscellaneous SoC-specific hooks. + * + * Copyright (C) 2011 Texas Instruments Incorporated + * + * Author: Mark Salter <msalter@redhat.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef _ASM_C6X_SOC_H +#define _ASM_C6X_SOC_H + +struct soc_ops { + /* Return active exception event or -1 if none */ + int (*get_exception)(void); + + /* Assert an event */ + void (*assert_event)(unsigned int evt); +}; + +extern struct soc_ops soc_ops; + +extern int soc_get_exception(void); +extern void soc_assert_event(unsigned int event); +extern int soc_mac_addr(unsigned int index, u8 *addr); + +/* + * for mmio on SoC devices. regs are always same byte order as cpu. + */ +#define soc_readl(addr) __raw_readl(addr) +#define soc_writel(b, addr) __raw_writel((b), (addr)) + +#endif /* _ASM_C6X_SOC_H */ diff --git a/arch/c6x/include/asm/string.h b/arch/c6x/include/asm/string.h new file mode 100644 index 000000000000..b21517c80a17 --- /dev/null +++ b/arch/c6x/include/asm/string.h @@ -0,0 +1,21 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_STRING_H +#define _ASM_C6X_STRING_H + +#include <asm/page.h> +#include <linux/linkage.h> + +asmlinkage extern void *memcpy(void *to, const void *from, size_t n); + +#define __HAVE_ARCH_MEMCPY + +#endif /* _ASM_C6X_STRING_H */ diff --git a/arch/c6x/include/asm/swab.h b/arch/c6x/include/asm/swab.h new file mode 100644 index 000000000000..fd4bb0520e5e --- /dev/null +++ b/arch/c6x/include/asm/swab.h @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated + * Author: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_SWAB_H +#define _ASM_C6X_SWAB_H + +static inline __attribute_const__ __u16 __c6x_swab16(__u16 val) +{ + asm("swap4 .l1 %0,%0\n" : "+a"(val)); + return val; +} + +static inline __attribute_const__ __u32 __c6x_swab32(__u32 val) +{ + asm("swap4 .l1 %0,%0\n" + "swap2 .l1 %0,%0\n" + : "+a"(val)); + return val; +} + +static inline __attribute_const__ __u64 __c6x_swab64(__u64 val) +{ + asm(" swap2 .s1 %p0,%P0\n" + "|| swap2 .l1 %P0,%p0\n" + " swap4 .l1 %p0,%p0\n" + " swap4 .l1 %P0,%P0\n" + : "+a"(val)); + return val; +} + +static inline __attribute_const__ __u32 __c6x_swahw32(__u32 val) +{ + asm("swap2 .l1 %0,%0\n" : "+a"(val)); + return val; +} + +static inline __attribute_const__ __u32 __c6x_swahb32(__u32 val) +{ + asm("swap4 .l1 %0,%0\n" : "+a"(val)); + return val; +} + +#define __arch_swab16 __c6x_swab16 +#define __arch_swab32 __c6x_swab32 +#define __arch_swab64 __c6x_swab64 +#define __arch_swahw32 __c6x_swahw32 +#define __arch_swahb32 __c6x_swahb32 + +#endif /* _ASM_C6X_SWAB_H */ diff --git a/arch/c6x/include/asm/syscall.h b/arch/c6x/include/asm/syscall.h new file mode 100644 index 000000000000..ae2be315ee9c --- /dev/null +++ b/arch/c6x/include/asm/syscall.h @@ -0,0 +1,123 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated + * Author: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __ASM_C6X_SYSCALL_H +#define __ASM_C6X_SYSCALL_H + +#include <linux/err.h> +#include <linux/sched.h> + +static inline int syscall_get_nr(struct task_struct *task, + struct pt_regs *regs) +{ + return regs->b0; +} + +static inline void syscall_rollback(struct task_struct *task, + struct pt_regs *regs) +{ + /* do nothing */ +} + +static inline long syscall_get_error(struct task_struct *task, + struct pt_regs *regs) +{ + return IS_ERR_VALUE(regs->a4) ? regs->a4 : 0; +} + +static inline long syscall_get_return_value(struct task_struct *task, + struct pt_regs *regs) +{ + return regs->a4; +} + +static inline void syscall_set_return_value(struct task_struct *task, + struct pt_regs *regs, + int error, long val) +{ + regs->a4 = error ?: val; +} + +static inline void syscall_get_arguments(struct task_struct *task, + struct pt_regs *regs, unsigned int i, + unsigned int n, unsigned long *args) +{ + switch (i) { + case 0: + if (!n--) + break; + *args++ = regs->a4; + case 1: + if (!n--) + break; + *args++ = regs->b4; + case 2: + if (!n--) + break; + *args++ = regs->a6; + case 3: + if (!n--) + break; + *args++ = regs->b6; + case 4: + if (!n--) + break; + *args++ = regs->a8; + case 5: + if (!n--) + break; + *args++ = regs->b8; + case 6: + if (!n--) + break; + default: + BUG(); + } +} + +static inline void syscall_set_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + const unsigned long *args) +{ + switch (i) { + case 0: + if (!n--) + break; + regs->a4 = *args++; + case 1: + if (!n--) + break; + regs->b4 = *args++; + case 2: + if (!n--) + break; + regs->a6 = *args++; + case 3: + if (!n--) + break; + regs->b6 = *args++; + case 4: + if (!n--) + break; + regs->a8 = *args++; + case 5: + if (!n--) + break; + regs->a9 = *args++; + case 6: + if (!n) + break; + default: + BUG(); + } +} + +#endif /* __ASM_C6X_SYSCALLS_H */ diff --git a/arch/c6x/include/asm/syscalls.h b/arch/c6x/include/asm/syscalls.h new file mode 100644 index 000000000000..aed53da703c9 --- /dev/null +++ b/arch/c6x/include/asm/syscalls.h @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated + * Author: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#ifndef __ASM_C6X_SYSCALLS_H +#define __ASM_C6X_SYSCALLS_H + +#include <linux/compiler.h> +#include <linux/linkage.h> +#include <linux/types.h> + +/* The array of function pointers for syscalls. */ +extern void *sys_call_table[]; + +/* The following are trampolines in entry.S to handle 64-bit arguments */ +extern long sys_pread_c6x(unsigned int fd, char __user *buf, + size_t count, off_t pos_low, off_t pos_high); +extern long sys_pwrite_c6x(unsigned int fd, const char __user *buf, + size_t count, off_t pos_low, off_t pos_high); +extern long sys_truncate64_c6x(const char __user *path, + off_t length_low, off_t length_high); +extern long sys_ftruncate64_c6x(unsigned int fd, + off_t length_low, off_t length_high); +extern long sys_fadvise64_c6x(int fd, u32 offset_lo, u32 offset_hi, + u32 len, int advice); +extern long sys_fadvise64_64_c6x(int fd, u32 offset_lo, u32 offset_hi, + u32 len_lo, u32 len_hi, int advice); +extern long sys_fallocate_c6x(int fd, int mode, + u32 offset_lo, u32 offset_hi, + u32 len_lo, u32 len_hi); +extern int sys_cache_sync(unsigned long s, unsigned long e); + +struct pt_regs; + +extern asmlinkage long sys_c6x_clone(struct pt_regs *regs); +extern asmlinkage long sys_c6x_execve(const char __user *name, + const char __user *const __user *argv, + const char __user *const __user *envp, + struct pt_regs *regs); + + +#include <asm-generic/syscalls.h> + +#endif /* __ASM_C6X_SYSCALLS_H */ diff --git a/arch/c6x/include/asm/system.h b/arch/c6x/include/asm/system.h new file mode 100644 index 000000000000..e076dc0eacc8 --- /dev/null +++ b/arch/c6x/include/asm/system.h @@ -0,0 +1,168 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_SYSTEM_H +#define _ASM_C6X_SYSTEM_H + +#include <linux/linkage.h> +#include <linux/irqflags.h> + +#define prepare_to_switch() do { } while (0) + +struct task_struct; +struct thread_struct; +asmlinkage void *__switch_to(struct thread_struct *prev, + struct thread_struct *next, + struct task_struct *tsk); + +#define switch_to(prev, next, last) \ + do { \ + current->thread.wchan = (u_long) __builtin_return_address(0); \ + (last) = __switch_to(&(prev)->thread, \ + &(next)->thread, (prev)); \ + mb(); \ + current->thread.wchan = 0; \ + } while (0) + +/* Reset the board */ +#define HARD_RESET_NOW() + +#define get_creg(reg) \ + ({ unsigned int __x; \ + asm volatile ("mvc .s2 " #reg ",%0\n" : "=b"(__x)); __x; }) + +#define set_creg(reg, v) \ + do { unsigned int __x = (unsigned int)(v); \ + asm volatile ("mvc .s2 %0," #reg "\n" : : "b"(__x)); \ + } while (0) + +#define or_creg(reg, n) \ + do { unsigned __x, __n = (unsigned)(n); \ + asm volatile ("mvc .s2 " #reg ",%0\n" \ + "or .l2 %1,%0,%0\n" \ + "mvc .s2 %0," #reg "\n" \ + "nop\n" \ + : "=&b"(__x) : "b"(__n)); \ + } while (0) + +#define and_creg(reg, n) \ + do { unsigned __x, __n = (unsigned)(n); \ + asm volatile ("mvc .s2 " #reg ",%0\n" \ + "and .l2 %1,%0,%0\n" \ + "mvc .s2 %0," #reg "\n" \ + "nop\n" \ + : "=&b"(__x) : "b"(__n)); \ + } while (0) + +#define get_coreid() (get_creg(DNUM) & 0xff) + +/* Set/get IST */ +#define set_ist(x) set_creg(ISTP, x) +#define get_ist() get_creg(ISTP) + +/* + * Exception management + */ +asmlinkage void enable_exception(void); +#define disable_exception() +#define get_except_type() get_creg(EFR) +#define ack_exception(type) set_creg(ECR, 1 << (type)) +#define get_iexcept() get_creg(IERR) +#define set_iexcept(mask) set_creg(IERR, (mask)) + +/* + * Misc. functions + */ +#define nop() asm("NOP\n"); +#define mb() barrier() +#define rmb() barrier() +#define wmb() barrier() +#define set_mb(var, value) do { var = value; mb(); } while (0) +#define set_wmb(var, value) do { var = value; wmb(); } while (0) + +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while (0) + +#define xchg(ptr, x) \ + ((__typeof__(*(ptr)))__xchg((unsigned int)(x), (void *) (ptr), \ + sizeof(*(ptr)))) +#define tas(ptr) xchg((ptr), 1) + +unsigned int _lmbd(unsigned int, unsigned int); +unsigned int _bitr(unsigned int); + +struct __xchg_dummy { unsigned int a[100]; }; +#define __xg(x) ((volatile struct __xchg_dummy *)(x)) + +static inline unsigned int __xchg(unsigned int x, volatile void *ptr, int size) +{ + unsigned int tmp; + unsigned long flags; + + local_irq_save(flags); + + switch (size) { + case 1: + tmp = 0; + tmp = *((unsigned char *) ptr); + *((unsigned char *) ptr) = (unsigned char) x; + break; + case 2: + tmp = 0; + tmp = *((unsigned short *) ptr); + *((unsigned short *) ptr) = x; + break; + case 4: + tmp = 0; + tmp = *((unsigned int *) ptr); + *((unsigned int *) ptr) = x; + break; + } + local_irq_restore(flags); + return tmp; +} + +#include <asm-generic/cmpxchg-local.h> + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n), \ + sizeof(*(ptr)))) +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#include <asm-generic/cmpxchg.h> + +#define _extu(x, s, e) \ + ({ unsigned int __x; \ + asm volatile ("extu .S2 %3,%1,%2,%0\n" : \ + "=b"(__x) : "n"(s), "n"(e), "b"(x)); \ + __x; }) + + +extern unsigned int c6x_core_freq; + +struct pt_regs; + +extern void die(char *str, struct pt_regs *fp, int nr); +extern asmlinkage int process_exception(struct pt_regs *regs); +extern void time_init(void); +extern void free_initmem(void); + +extern void (*c6x_restart)(void); +extern void (*c6x_halt)(void); + +#endif /* _ASM_C6X_SYSTEM_H */ diff --git a/arch/c6x/include/asm/thread_info.h b/arch/c6x/include/asm/thread_info.h new file mode 100644 index 000000000000..fd99148cda9d --- /dev/null +++ b/arch/c6x/include/asm/thread_info.h @@ -0,0 +1,121 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * Updated for 2.6.3x: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_THREAD_INFO_H +#define _ASM_C6X_THREAD_INFO_H + +#ifdef __KERNEL__ + +#include <asm/page.h> + +#ifdef CONFIG_4KSTACKS +#define THREAD_SIZE 4096 +#define THREAD_SHIFT 12 +#define THREAD_ORDER 0 +#else +#define THREAD_SIZE 8192 +#define THREAD_SHIFT 13 +#define THREAD_ORDER 1 +#endif + +#define THREAD_START_SP (THREAD_SIZE - 8) + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned long seg; +} mm_segment_t; + +/* + * low level task data. + */ +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + int cpu; /* cpu we're on */ + int preempt_count; /* 0 = preemptable, <0 = BUG */ + mm_segment_t addr_limit; /* thread address space */ + struct restart_block restart_block; +}; + +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = INIT_PREEMPT_COUNT, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* get the thread information struct of current task */ +static inline __attribute__((const)) +struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; + asm volatile (" clr .s2 B15,0,%1,%0\n" + : "=b" (ti) + : "Iu5" (THREAD_SHIFT - 1)); + return ti; +} + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR + +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define THREAD_FLAGS (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO) +#else +#define THREAD_FLAGS (GFP_KERNEL | __GFP_NOTRACK) +#endif + +#define alloc_thread_info_node(tsk, node) \ + ((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER)) + +#define free_thread_info(ti) free_pages((unsigned long) (ti), THREAD_ORDER) +#define get_thread_info(ti) get_task_struct((ti)->task) +#define put_thread_info(ti) put_task_struct((ti)->task) +#endif /* __ASSEMBLY__ */ + +#define PREEMPT_ACTIVE 0x10000000 + +/* + * thread information flag bit numbers + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_RESTORE_SIGMASK 4 /* restore signal mask in do_signal() */ + +#define TIF_POLLING_NRFLAG 16 /* true if polling TIF_NEED_RESCHED */ +#define TIF_MEMDIE 17 /* OOM killer killed process */ + +#define TIF_WORK_MASK 0x00007FFE /* work on irq/exception return */ +#define TIF_ALLWORK_MASK 0x00007FFF /* work on any return to u-space */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_C6X_THREAD_INFO_H */ diff --git a/arch/c6x/include/asm/timer64.h b/arch/c6x/include/asm/timer64.h new file mode 100644 index 000000000000..bbe27bb9887e --- /dev/null +++ b/arch/c6x/include/asm/timer64.h @@ -0,0 +1,6 @@ +#ifndef _C6X_TIMER64_H +#define _C6X_TIMER64_H + +extern void __init timer64_init(void); + +#endif /* _C6X_TIMER64_H */ diff --git a/arch/c6x/include/asm/timex.h b/arch/c6x/include/asm/timex.h new file mode 100644 index 000000000000..508c3ec971f9 --- /dev/null +++ b/arch/c6x/include/asm/timex.h @@ -0,0 +1,33 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * Modified for 2.6.34: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_TIMEX_H +#define _ASM_C6X_TIMEX_H + +#define CLOCK_TICK_RATE ((1000 * 1000000UL) / 6) + +/* 64-bit timestamp */ +typedef unsigned long long cycles_t; + +static inline cycles_t get_cycles(void) +{ + unsigned l, h; + + asm volatile (" dint\n" + " mvc .s2 TSCL,%0\n" + " mvc .s2 TSCH,%1\n" + " rint\n" + : "=b"(l), "=b"(h)); + return ((cycles_t)h << 32) | l; +} + +#endif /* _ASM_C6X_TIMEX_H */ diff --git a/arch/c6x/include/asm/tlb.h b/arch/c6x/include/asm/tlb.h new file mode 100644 index 000000000000..8709e5e29d2d --- /dev/null +++ b/arch/c6x/include/asm/tlb.h @@ -0,0 +1,8 @@ +#ifndef _ASM_C6X_TLB_H +#define _ASM_C6X_TLB_H + +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +#include <asm-generic/tlb.h> + +#endif /* _ASM_C6X_TLB_H */ diff --git a/arch/c6x/include/asm/traps.h b/arch/c6x/include/asm/traps.h new file mode 100644 index 000000000000..62124d7b1b5f --- /dev/null +++ b/arch/c6x/include/asm/traps.h @@ -0,0 +1,36 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_TRAPS_H +#define _ASM_C6X_TRAPS_H + +#define EXCEPT_TYPE_NXF 31 /* NMI */ +#define EXCEPT_TYPE_EXC 30 /* external exception */ +#define EXCEPT_TYPE_IXF 1 /* internal exception */ +#define EXCEPT_TYPE_SXF 0 /* software exception */ + +#define EXCEPT_CAUSE_LBX (1 << 7) /* loop buffer exception */ +#define EXCEPT_CAUSE_PRX (1 << 6) /* privilege exception */ +#define EXCEPT_CAUSE_RAX (1 << 5) /* resource access exception */ +#define EXCEPT_CAUSE_RCX (1 << 4) /* resource conflict exception */ +#define EXCEPT_CAUSE_OPX (1 << 3) /* opcode exception */ +#define EXCEPT_CAUSE_EPX (1 << 2) /* execute packet exception */ +#define EXCEPT_CAUSE_FPX (1 << 1) /* fetch packet exception */ +#define EXCEPT_CAUSE_IFX (1 << 0) /* instruction fetch exception */ + +struct exception_info { + char *kernel_str; + int signo; + int code; +}; + +extern int (*c6x_nmi_handler)(struct pt_regs *regs); + +#endif /* _ASM_C6X_TRAPS_H */ diff --git a/arch/c6x/include/asm/uaccess.h b/arch/c6x/include/asm/uaccess.h new file mode 100644 index 000000000000..453dd263bee3 --- /dev/null +++ b/arch/c6x/include/asm/uaccess.h @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated + * Author: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_UACCESS_H +#define _ASM_C6X_UACCESS_H + +#include <linux/types.h> +#include <linux/compiler.h> +#include <linux/string.h> + +#ifdef CONFIG_ACCESS_CHECK +#define __access_ok _access_ok +#endif + +/* + * __copy_from_user/copy_to_user are based on ones in asm-generic/uaccess.h + * + * C6X supports unaligned 32 and 64 bit loads and stores. + */ +static inline __must_check long __copy_from_user(void *to, + const void __user *from, unsigned long n) +{ + u32 tmp32; + u64 tmp64; + + if (__builtin_constant_p(n)) { + switch (n) { + case 1: + *(u8 *)to = *(u8 __force *)from; + return 0; + case 4: + asm volatile ("ldnw .d1t1 *%2,%0\n" + "nop 4\n" + "stnw .d1t1 %0,*%1\n" + : "=&a"(tmp32) + : "A"(to), "a"(from) + : "memory"); + return 0; + case 8: + asm volatile ("ldndw .d1t1 *%2,%0\n" + "nop 4\n" + "stndw .d1t1 %0,*%1\n" + : "=&a"(tmp64) + : "a"(to), "a"(from) + : "memory"); + return 0; + default: + break; + } + } + + memcpy(to, (const void __force *)from, n); + return 0; +} + +static inline __must_check long __copy_to_user(void __user *to, + const void *from, unsigned long n) +{ + u32 tmp32; + u64 tmp64; + + if (__builtin_constant_p(n)) { + switch (n) { + case 1: + *(u8 __force *)to = *(u8 *)from; + return 0; + case 4: + asm volatile ("ldnw .d1t1 *%2,%0\n" + "nop 4\n" + "stnw .d1t1 %0,*%1\n" + : "=&a"(tmp32) + : "a"(to), "a"(from) + : "memory"); + return 0; + case 8: + asm volatile ("ldndw .d1t1 *%2,%0\n" + "nop 4\n" + "stndw .d1t1 %0,*%1\n" + : "=&a"(tmp64) + : "a"(to), "a"(from) + : "memory"); + return 0; + default: + break; + } + } + + memcpy((void __force *)to, from, n); + return 0; +} + +#define __copy_to_user __copy_to_user +#define __copy_from_user __copy_from_user + +extern int _access_ok(unsigned long addr, unsigned long size); +#ifdef CONFIG_ACCESS_CHECK +#define __access_ok _access_ok +#endif + +#include <asm-generic/uaccess.h> + +#endif /* _ASM_C6X_UACCESS_H */ diff --git a/arch/c6x/include/asm/unaligned.h b/arch/c6x/include/asm/unaligned.h new file mode 100644 index 000000000000..b976cb740eaa --- /dev/null +++ b/arch/c6x/include/asm/unaligned.h @@ -0,0 +1,170 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * Rewritten for 2.6.3x: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_UNALIGNED_H +#define _ASM_C6X_UNALIGNED_H + +#include <linux/swab.h> + +/* + * The C64x+ can do unaligned word and dword accesses in hardware + * using special load/store instructions. + */ + +static inline u16 get_unaligned_le16(const void *p) +{ + const u8 *_p = p; + return _p[0] | _p[1] << 8; +} + +static inline u16 get_unaligned_be16(const void *p) +{ + const u8 *_p = p; + return _p[0] << 8 | _p[1]; +} + +static inline void put_unaligned_le16(u16 val, void *p) +{ + u8 *_p = p; + _p[0] = val; + _p[1] = val >> 8; +} + +static inline void put_unaligned_be16(u16 val, void *p) +{ + u8 *_p = p; + _p[0] = val >> 8; + _p[1] = val; +} + +static inline u32 get_unaligned32(const void *p) +{ + u32 val = (u32) p; + asm (" ldnw .d1t1 *%0,%0\n" + " nop 4\n" + : "+a"(val)); + return val; +} + +static inline void put_unaligned32(u32 val, void *p) +{ + asm volatile (" stnw .d2t1 %0,*%1\n" + : : "a"(val), "b"(p) : "memory"); +} + +static inline u64 get_unaligned64(const void *p) +{ + u64 val; + asm volatile (" ldndw .d1t1 *%1,%0\n" + " nop 4\n" + : "=a"(val) : "a"(p)); + return val; +} + +static inline void put_unaligned64(u64 val, const void *p) +{ + asm volatile (" stndw .d2t1 %0,*%1\n" + : : "a"(val), "b"(p) : "memory"); +} + +#ifdef CONFIG_CPU_BIG_ENDIAN + +#define get_unaligned_le32(p) __swab32(get_unaligned32(p)) +#define get_unaligned_le64(p) __swab64(get_unaligned64(p)) +#define get_unaligned_be32(p) get_unaligned32(p) +#define get_unaligned_be64(p) get_unaligned64(p) +#define put_unaligned_le32(v, p) put_unaligned32(__swab32(v), (p)) +#define put_unaligned_le64(v, p) put_unaligned64(__swab64(v), (p)) +#define put_unaligned_be32(v, p) put_unaligned32((v), (p)) +#define put_unaligned_be64(v, p) put_unaligned64((v), (p)) +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be + +#else + +#define get_unaligned_le32(p) get_unaligned32(p) +#define get_unaligned_le64(p) get_unaligned64(p) +#define get_unaligned_be32(p) __swab32(get_unaligned32(p)) +#define get_unaligned_be64(p) __swab64(get_unaligned64(p)) +#define put_unaligned_le32(v, p) put_unaligned32((v), (p)) +#define put_unaligned_le64(v, p) put_unaligned64((v), (p)) +#define put_unaligned_be32(v, p) put_unaligned32(__swab32(v), (p)) +#define put_unaligned_be64(v, p) put_unaligned64(__swab64(v), (p)) +#define get_unaligned __get_unaligned_le +#define put_unaligned __put_unaligned_le + +#endif + +/* + * Cause a link-time error if we try an unaligned access other than + * 1,2,4 or 8 bytes long + */ +extern int __bad_unaligned_access_size(void); + +#define __get_unaligned_le(ptr) (typeof(*(ptr)))({ \ + sizeof(*(ptr)) == 1 ? *(ptr) : \ + (sizeof(*(ptr)) == 2 ? get_unaligned_le16((ptr)) : \ + (sizeof(*(ptr)) == 4 ? get_unaligned_le32((ptr)) : \ + (sizeof(*(ptr)) == 8 ? get_unaligned_le64((ptr)) : \ + __bad_unaligned_access_size()))); \ + }) + +#define __get_unaligned_be(ptr) (__force typeof(*(ptr)))({ \ + sizeof(*(ptr)) == 1 ? *(ptr) : \ + (sizeof(*(ptr)) == 2 ? get_unaligned_be16((ptr)) : \ + (sizeof(*(ptr)) == 4 ? get_unaligned_be32((ptr)) : \ + (sizeof(*(ptr)) == 8 ? get_unaligned_be64((ptr)) : \ + __bad_unaligned_access_size()))); \ + }) + +#define __put_unaligned_le(val, ptr) ({ \ + void *__gu_p = (ptr); \ + switch (sizeof(*(ptr))) { \ + case 1: \ + *(u8 *)__gu_p = (__force u8)(val); \ + break; \ + case 2: \ + put_unaligned_le16((__force u16)(val), __gu_p); \ + break; \ + case 4: \ + put_unaligned_le32((__force u32)(val), __gu_p); \ + break; \ + case 8: \ + put_unaligned_le64((__force u64)(val), __gu_p); \ + break; \ + default: \ + __bad_unaligned_access_size(); \ + break; \ + } \ + (void)0; }) + +#define __put_unaligned_be(val, ptr) ({ \ + void *__gu_p = (ptr); \ + switch (sizeof(*(ptr))) { \ + case 1: \ + *(u8 *)__gu_p = (__force u8)(val); \ + break; \ + case 2: \ + put_unaligned_be16((__force u16)(val), __gu_p); \ + break; \ + case 4: \ + put_unaligned_be32((__force u32)(val), __gu_p); \ + break; \ + case 8: \ + put_unaligned_be64((__force u64)(val), __gu_p); \ + break; \ + default: \ + __bad_unaligned_access_size(); \ + break; \ + } \ + (void)0; }) + +#endif /* _ASM_C6X_UNALIGNED_H */ diff --git a/arch/c6x/include/asm/unistd.h b/arch/c6x/include/asm/unistd.h new file mode 100644 index 000000000000..6d54ea4262eb --- /dev/null +++ b/arch/c6x/include/asm/unistd.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated + * + * Based on arch/tile version. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ +#if !defined(_ASM_C6X_UNISTD_H) || defined(__SYSCALL) +#define _ASM_C6X_UNISTD_H + +/* Use the standard ABI for syscalls. */ +#include <asm-generic/unistd.h> + +/* C6X-specific syscalls. */ +#define __NR_cache_sync (__NR_arch_specific_syscall + 0) +__SYSCALL(__NR_cache_sync, sys_cache_sync) + +#endif /* _ASM_C6X_UNISTD_H */ diff --git a/arch/c6x/kernel/Makefile b/arch/c6x/kernel/Makefile new file mode 100644 index 000000000000..580a515a9443 --- /dev/null +++ b/arch/c6x/kernel/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for arch/c6x/kernel/ +# + +extra-y := head.o vmlinux.lds + +obj-y := process.o traps.o irq.o signal.o ptrace.o +obj-y += setup.o sys_c6x.o time.o devicetree.o +obj-y += switch_to.o entry.o vectors.o c6x_ksyms.o +obj-y += soc.o dma.o + +obj-$(CONFIG_MODULES) += module.o diff --git a/arch/c6x/kernel/asm-offsets.c b/arch/c6x/kernel/asm-offsets.c new file mode 100644 index 000000000000..759ad6d207b6 --- /dev/null +++ b/arch/c6x/kernel/asm-offsets.c @@ -0,0 +1,123 @@ +/* + * Generate definitions needed by assembly language modules. + * This code generates raw asm output which is post-processed + * to extract and format the required data. + */ + +#include <linux/sched.h> +#include <linux/thread_info.h> +#include <asm/procinfo.h> +#include <linux/kbuild.h> +#include <linux/unistd.h> + +void foo(void) +{ + OFFSET(REGS_A16, pt_regs, a16); + OFFSET(REGS_A17, pt_regs, a17); + OFFSET(REGS_A18, pt_regs, a18); + OFFSET(REGS_A19, pt_regs, a19); + OFFSET(REGS_A20, pt_regs, a20); + OFFSET(REGS_A21, pt_regs, a21); + OFFSET(REGS_A22, pt_regs, a22); + OFFSET(REGS_A23, pt_regs, a23); + OFFSET(REGS_A24, pt_regs, a24); + OFFSET(REGS_A25, pt_regs, a25); + OFFSET(REGS_A26, pt_regs, a26); + OFFSET(REGS_A27, pt_regs, a27); + OFFSET(REGS_A28, pt_regs, a28); + OFFSET(REGS_A29, pt_regs, a29); + OFFSET(REGS_A30, pt_regs, a30); + OFFSET(REGS_A31, pt_regs, a31); + + OFFSET(REGS_B16, pt_regs, b16); + OFFSET(REGS_B17, pt_regs, b17); + OFFSET(REGS_B18, pt_regs, b18); + OFFSET(REGS_B19, pt_regs, b19); + OFFSET(REGS_B20, pt_regs, b20); + OFFSET(REGS_B21, pt_regs, b21); + OFFSET(REGS_B22, pt_regs, b22); + OFFSET(REGS_B23, pt_regs, b23); + OFFSET(REGS_B24, pt_regs, b24); + OFFSET(REGS_B25, pt_regs, b25); + OFFSET(REGS_B26, pt_regs, b26); + OFFSET(REGS_B27, pt_regs, b27); + OFFSET(REGS_B28, pt_regs, b28); + OFFSET(REGS_B29, pt_regs, b29); + OFFSET(REGS_B30, pt_regs, b30); + OFFSET(REGS_B31, pt_regs, b31); + + OFFSET(REGS_A0, pt_regs, a0); + OFFSET(REGS_A1, pt_regs, a1); + OFFSET(REGS_A2, pt_regs, a2); + OFFSET(REGS_A3, pt_regs, a3); + OFFSET(REGS_A4, pt_regs, a4); + OFFSET(REGS_A5, pt_regs, a5); + OFFSET(REGS_A6, pt_regs, a6); + OFFSET(REGS_A7, pt_regs, a7); + OFFSET(REGS_A8, pt_regs, a8); + OFFSET(REGS_A9, pt_regs, a9); + OFFSET(REGS_A10, pt_regs, a10); + OFFSET(REGS_A11, pt_regs, a11); + OFFSET(REGS_A12, pt_regs, a12); + OFFSET(REGS_A13, pt_regs, a13); + OFFSET(REGS_A14, pt_regs, a14); + OFFSET(REGS_A15, pt_regs, a15); + + OFFSET(REGS_B0, pt_regs, b0); + OFFSET(REGS_B1, pt_regs, b1); + OFFSET(REGS_B2, pt_regs, b2); + OFFSET(REGS_B3, pt_regs, b3); + OFFSET(REGS_B4, pt_regs, b4); + OFFSET(REGS_B5, pt_regs, b5); + OFFSET(REGS_B6, pt_regs, b6); + OFFSET(REGS_B7, pt_regs, b7); + OFFSET(REGS_B8, pt_regs, b8); + OFFSET(REGS_B9, pt_regs, b9); + OFFSET(REGS_B10, pt_regs, b10); + OFFSET(REGS_B11, pt_regs, b11); + OFFSET(REGS_B12, pt_regs, b12); + OFFSET(REGS_B13, pt_regs, b13); + OFFSET(REGS_DP, pt_regs, dp); + OFFSET(REGS_SP, pt_regs, sp); + + OFFSET(REGS_TSR, pt_regs, tsr); + OFFSET(REGS_ORIG_A4, pt_regs, orig_a4); + + DEFINE(REGS__END, sizeof(struct pt_regs)); + BLANK(); + + OFFSET(THREAD_PC, thread_struct, pc); + OFFSET(THREAD_B15_14, thread_struct, b15_14); + OFFSET(THREAD_A15_14, thread_struct, a15_14); + OFFSET(THREAD_B13_12, thread_struct, b13_12); + OFFSET(THREAD_A13_12, thread_struct, a13_12); + OFFSET(THREAD_B11_10, thread_struct, b11_10); + OFFSET(THREAD_A11_10, thread_struct, a11_10); + OFFSET(THREAD_RICL_ICL, thread_struct, ricl_icl); + BLANK(); + + OFFSET(TASK_STATE, task_struct, state); + BLANK(); + + OFFSET(THREAD_INFO_FLAGS, thread_info, flags); + OFFSET(THREAD_INFO_PREEMPT_COUNT, thread_info, preempt_count); + BLANK(); + + /* These would be unneccessary if we ran asm files + * through the preprocessor. + */ + DEFINE(KTHREAD_SIZE, THREAD_SIZE); + DEFINE(KTHREAD_SHIFT, THREAD_SHIFT); + DEFINE(KTHREAD_START_SP, THREAD_START_SP); + DEFINE(ENOSYS_, ENOSYS); + DEFINE(NR_SYSCALLS_, __NR_syscalls); + + DEFINE(_TIF_SYSCALL_TRACE, (1<<TIF_SYSCALL_TRACE)); + DEFINE(_TIF_NOTIFY_RESUME, (1<<TIF_NOTIFY_RESUME)); + DEFINE(_TIF_SIGPENDING, (1<<TIF_SIGPENDING)); + DEFINE(_TIF_NEED_RESCHED, (1<<TIF_NEED_RESCHED)); + DEFINE(_TIF_POLLING_NRFLAG, (1<<TIF_POLLING_NRFLAG)); + + DEFINE(_TIF_ALLWORK_MASK, TIF_ALLWORK_MASK); + DEFINE(_TIF_WORK_MASK, TIF_WORK_MASK); +} diff --git a/arch/c6x/kernel/c6x_ksyms.c b/arch/c6x/kernel/c6x_ksyms.c new file mode 100644 index 000000000000..0ba3e0bba3e1 --- /dev/null +++ b/arch/c6x/kernel/c6x_ksyms.c @@ -0,0 +1,66 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/module.h> +#include <asm/checksum.h> +#include <linux/io.h> + +/* + * libgcc functions - used internally by the compiler... + */ +extern int __c6xabi_divi(int dividend, int divisor); +EXPORT_SYMBOL(__c6xabi_divi); + +extern unsigned __c6xabi_divu(unsigned dividend, unsigned divisor); +EXPORT_SYMBOL(__c6xabi_divu); + +extern int __c6xabi_remi(int dividend, int divisor); +EXPORT_SYMBOL(__c6xabi_remi); + +extern unsigned __c6xabi_remu(unsigned dividend, unsigned divisor); +EXPORT_SYMBOL(__c6xabi_remu); + +extern int __c6xabi_divremi(int dividend, int divisor); +EXPORT_SYMBOL(__c6xabi_divremi); + +extern unsigned __c6xabi_divremu(unsigned dividend, unsigned divisor); +EXPORT_SYMBOL(__c6xabi_divremu); + +extern unsigned long long __c6xabi_mpyll(unsigned long long src1, + unsigned long long src2); +EXPORT_SYMBOL(__c6xabi_mpyll); + +extern long long __c6xabi_negll(long long src); +EXPORT_SYMBOL(__c6xabi_negll); + +extern unsigned long long __c6xabi_llshl(unsigned long long src1, uint src2); +EXPORT_SYMBOL(__c6xabi_llshl); + +extern long long __c6xabi_llshr(long long src1, uint src2); +EXPORT_SYMBOL(__c6xabi_llshr); + +extern unsigned long long __c6xabi_llshru(unsigned long long src1, uint src2); +EXPORT_SYMBOL(__c6xabi_llshru); + +extern void __c6xabi_strasgi(int *dst, const int *src, unsigned cnt); +EXPORT_SYMBOL(__c6xabi_strasgi); + +extern void __c6xabi_push_rts(void); +EXPORT_SYMBOL(__c6xabi_push_rts); + +extern void __c6xabi_pop_rts(void); +EXPORT_SYMBOL(__c6xabi_pop_rts); + +extern void __c6xabi_strasgi_64plus(int *dst, const int *src, unsigned cnt); +EXPORT_SYMBOL(__c6xabi_strasgi_64plus); + +/* lib functions */ +EXPORT_SYMBOL(memcpy); diff --git a/arch/c6x/kernel/devicetree.c b/arch/c6x/kernel/devicetree.c new file mode 100644 index 000000000000..bdb56f09d0ac --- /dev/null +++ b/arch/c6x/kernel/devicetree.c @@ -0,0 +1,53 @@ +/* + * Architecture specific OF callbacks. + * + * Copyright (C) 2011 Texas Instruments Incorporated + * Author: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/initrd.h> +#include <linux/memblock.h> + +void __init early_init_devtree(void *params) +{ + /* Setup flat device-tree pointer */ + initial_boot_params = params; + + /* Retrieve various informations from the /chosen node of the + * device-tree, including the platform type, initrd location and + * size and more ... + */ + of_scan_flat_dt(early_init_dt_scan_chosen, c6x_command_line); + + /* Scan memory nodes and rebuild MEMBLOCKs */ + of_scan_flat_dt(early_init_dt_scan_root, NULL); + of_scan_flat_dt(early_init_dt_scan_memory, NULL); +} + + +#ifdef CONFIG_BLK_DEV_INITRD +void __init early_init_dt_setup_initrd_arch(unsigned long start, + unsigned long end) +{ + initrd_start = (unsigned long)__va(start); + initrd_end = (unsigned long)__va(end); + initrd_below_start_ok = 1; +} +#endif + +void __init early_init_dt_add_memory_arch(u64 base, u64 size) +{ + c6x_add_memory(base, size); +} + +void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) +{ + return __va(memblock_alloc(size, align)); +} diff --git a/arch/c6x/kernel/dma.c b/arch/c6x/kernel/dma.c new file mode 100644 index 000000000000..ab7b12de144d --- /dev/null +++ b/arch/c6x/kernel/dma.c @@ -0,0 +1,153 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated + * Author: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/dma-mapping.h> +#include <linux/mm.h> +#include <linux/mm_types.h> +#include <linux/scatterlist.h> + +#include <asm/cacheflush.h> + +static void c6x_dma_sync(dma_addr_t handle, size_t size, + enum dma_data_direction dir) +{ + unsigned long paddr = handle; + + BUG_ON(!valid_dma_direction(dir)); + + switch (dir) { + case DMA_FROM_DEVICE: + L2_cache_block_invalidate(paddr, paddr + size); + break; + case DMA_TO_DEVICE: + L2_cache_block_writeback(paddr, paddr + size); + break; + case DMA_BIDIRECTIONAL: + L2_cache_block_writeback_invalidate(paddr, paddr + size); + break; + default: + break; + } +} + +dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction dir) +{ + dma_addr_t addr = virt_to_phys(ptr); + + c6x_dma_sync(addr, size, dir); + + debug_dma_map_page(dev, virt_to_page(ptr), + (unsigned long)ptr & ~PAGE_MASK, size, + dir, addr, true); + return addr; +} +EXPORT_SYMBOL(dma_map_single); + + +void dma_unmap_single(struct device *dev, dma_addr_t handle, + size_t size, enum dma_data_direction dir) +{ + c6x_dma_sync(handle, size, dir); + + debug_dma_unmap_page(dev, handle, size, dir, true); +} +EXPORT_SYMBOL(dma_unmap_single); + + +int dma_map_sg(struct device *dev, struct scatterlist *sglist, + int nents, enum dma_data_direction dir) +{ + struct scatterlist *sg; + int i; + + for_each_sg(sglist, sg, nents, i) + sg->dma_address = dma_map_single(dev, sg_virt(sg), sg->length, + dir); + + debug_dma_map_sg(dev, sglist, nents, nents, dir); + + return nents; +} +EXPORT_SYMBOL(dma_map_sg); + + +void dma_unmap_sg(struct device *dev, struct scatterlist *sglist, + int nents, enum dma_data_direction dir) +{ + struct scatterlist *sg; + int i; + + for_each_sg(sglist, sg, nents, i) + dma_unmap_single(dev, sg_dma_address(sg), sg->length, dir); + + debug_dma_unmap_sg(dev, sglist, nents, dir); +} +EXPORT_SYMBOL(dma_unmap_sg); + +void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, + size_t size, enum dma_data_direction dir) +{ + c6x_dma_sync(handle, size, dir); + + debug_dma_sync_single_for_cpu(dev, handle, size, dir); +} +EXPORT_SYMBOL(dma_sync_single_for_cpu); + + +void dma_sync_single_for_device(struct device *dev, dma_addr_t handle, + size_t size, enum dma_data_direction dir) +{ + c6x_dma_sync(handle, size, dir); + + debug_dma_sync_single_for_device(dev, handle, size, dir); +} +EXPORT_SYMBOL(dma_sync_single_for_device); + + +void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sglist, + int nents, enum dma_data_direction dir) +{ + struct scatterlist *sg; + int i; + + for_each_sg(sglist, sg, nents, i) + dma_sync_single_for_cpu(dev, sg_dma_address(sg), + sg->length, dir); + + debug_dma_sync_sg_for_cpu(dev, sglist, nents, dir); +} +EXPORT_SYMBOL(dma_sync_sg_for_cpu); + + +void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sglist, + int nents, enum dma_data_direction dir) +{ + struct scatterlist *sg; + int i; + + for_each_sg(sglist, sg, nents, i) + dma_sync_single_for_device(dev, sg_dma_address(sg), + sg->length, dir); + + debug_dma_sync_sg_for_device(dev, sglist, nents, dir); +} +EXPORT_SYMBOL(dma_sync_sg_for_device); + + +/* Number of entries preallocated for DMA-API debugging */ +#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16) + +static int __init dma_init(void) +{ + dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); + + return 0; +} +fs_initcall(dma_init); diff --git a/arch/c6x/kernel/entry.S b/arch/c6x/kernel/entry.S new file mode 100644 index 000000000000..3e977ccda827 --- /dev/null +++ b/arch/c6x/kernel/entry.S @@ -0,0 +1,803 @@ +; +; Port on Texas Instruments TMS320C6x architecture +; +; Copyright (C) 2004-2011 Texas Instruments Incorporated +; Author: Aurelien Jacquiot (aurelien.jacquiot@virtuallogix.com) +; Updated for 2.6.34: Mark Salter <msalter@redhat.com> +; +; This program is free software; you can redistribute it and/or modify +; it under the terms of the GNU General Public License version 2 as +; published by the Free Software Foundation. +; + +#include <linux/sys.h> +#include <linux/linkage.h> +#include <asm/thread_info.h> +#include <asm/asm-offsets.h> +#include <asm/unistd.h> +#include <asm/errno.h> + +; Registers naming +#define DP B14 +#define SP B15 + +#ifndef CONFIG_PREEMPT +#define resume_kernel restore_all +#endif + + .altmacro + + .macro MASK_INT reg + MVC .S2 CSR,reg + CLR .S2 reg,0,0,reg + MVC .S2 reg,CSR + .endm + + .macro UNMASK_INT reg + MVC .S2 CSR,reg + SET .S2 reg,0,0,reg + MVC .S2 reg,CSR + .endm + + .macro GET_THREAD_INFO reg + SHR .S1X SP,THREAD_SHIFT,reg + SHL .S1 reg,THREAD_SHIFT,reg + .endm + + ;; + ;; This defines the normal kernel pt_regs layout. + ;; + .macro SAVE_ALL __rp __tsr + STW .D2T2 B0,*SP--[2] ; save original B0 + MVKL .S2 current_ksp,B0 + MVKH .S2 current_ksp,B0 + LDW .D2T2 *B0,B1 ; KSP + + NOP 3 + STW .D2T2 B1,*+SP[1] ; save original B1 + XOR .D2 SP,B1,B0 ; (SP ^ KSP) + LDW .D2T2 *+SP[1],B1 ; restore B0/B1 + LDW .D2T2 *++SP[2],B0 + SHR .S2 B0,THREAD_SHIFT,B0 ; 0 if already using kstack + [B0] STDW .D2T2 SP:DP,*--B1[1] ; user: save user sp/dp kstack + [B0] MV .S2 B1,SP ; and switch to kstack +||[!B0] STDW .D2T2 SP:DP,*--SP[1] ; kernel: save on current stack + + SUBAW .D2 SP,2,SP + + ADD .D1X SP,-8,A15 + || STDW .D2T1 A15:A14,*SP--[16] ; save A15:A14 + + STDW .D2T2 B13:B12,*SP--[1] + || STDW .D1T1 A13:A12,*A15--[1] + || MVC .S2 __rp,B13 + + STDW .D2T2 B11:B10,*SP--[1] + || STDW .D1T1 A11:A10,*A15--[1] + || MVC .S2 CSR,B12 + + STDW .D2T2 B9:B8,*SP--[1] + || STDW .D1T1 A9:A8,*A15--[1] + || MVC .S2 RILC,B11 + STDW .D2T2 B7:B6,*SP--[1] + || STDW .D1T1 A7:A6,*A15--[1] + || MVC .S2 ILC,B10 + + STDW .D2T2 B5:B4,*SP--[1] + || STDW .D1T1 A5:A4,*A15--[1] + + STDW .D2T2 B3:B2,*SP--[1] + || STDW .D1T1 A3:A2,*A15--[1] + || MVC .S2 __tsr,B5 + + STDW .D2T2 B1:B0,*SP--[1] + || STDW .D1T1 A1:A0,*A15--[1] + || MV .S1X B5,A5 + + STDW .D2T2 B31:B30,*SP--[1] + || STDW .D1T1 A31:A30,*A15--[1] + STDW .D2T2 B29:B28,*SP--[1] + || STDW .D1T1 A29:A28,*A15--[1] + STDW .D2T2 B27:B26,*SP--[1] + || STDW .D1T1 A27:A26,*A15--[1] + STDW .D2T2 B25:B24,*SP--[1] + || STDW .D1T1 A25:A24,*A15--[1] + STDW .D2T2 B23:B22,*SP--[1] + || STDW .D1T1 A23:A22,*A15--[1] + STDW .D2T2 B21:B20,*SP--[1] + || STDW .D1T1 A21:A20,*A15--[1] + STDW .D2T2 B19:B18,*SP--[1] + || STDW .D1T1 A19:A18,*A15--[1] + STDW .D2T2 B17:B16,*SP--[1] + || STDW .D1T1 A17:A16,*A15--[1] + + STDW .D2T2 B13:B12,*SP--[1] ; save PC and CSR + + STDW .D2T2 B11:B10,*SP--[1] ; save RILC and ILC + STDW .D2T1 A5:A4,*SP--[1] ; save TSR and orig A4 + + ;; We left an unused word on the stack just above pt_regs. + ;; It is used to save whether or not this frame is due to + ;; a syscall. It is cleared here, but the syscall handler + ;; sets it to a non-zero value. + MVK .L2 0,B1 + STW .D2T2 B1,*+SP(REGS__END+8) ; clear syscall flag + .endm + + .macro RESTORE_ALL __rp __tsr + LDDW .D2T2 *++SP[1],B9:B8 ; get TSR (B9) + LDDW .D2T2 *++SP[1],B11:B10 ; get RILC (B11) and ILC (B10) + LDDW .D2T2 *++SP[1],B13:B12 ; get PC (B13) and CSR (B12) + + ADDAW .D1X SP,30,A15 + + LDDW .D1T1 *++A15[1],A17:A16 + || LDDW .D2T2 *++SP[1],B17:B16 + LDDW .D1T1 *++A15[1],A19:A18 + || LDDW .D2T2 *++SP[1],B19:B18 + LDDW .D1T1 *++A15[1],A21:A20 + || LDDW .D2T2 *++SP[1],B21:B20 + LDDW .D1T1 *++A15[1],A23:A22 + || LDDW .D2T2 *++SP[1],B23:B22 + LDDW .D1T1 *++A15[1],A25:A24 + || LDDW .D2T2 *++SP[1],B25:B24 + LDDW .D1T1 *++A15[1],A27:A26 + || LDDW .D2T2 *++SP[1],B27:B26 + LDDW .D1T1 *++A15[1],A29:A28 + || LDDW .D2T2 *++SP[1],B29:B28 + LDDW .D1T1 *++A15[1],A31:A30 + || LDDW .D2T2 *++SP[1],B31:B30 + + LDDW .D1T1 *++A15[1],A1:A0 + || LDDW .D2T2 *++SP[1],B1:B0 + + LDDW .D1T1 *++A15[1],A3:A2 + || LDDW .D2T2 *++SP[1],B3:B2 + || MVC .S2 B9,__tsr + LDDW .D1T1 *++A15[1],A5:A4 + || LDDW .D2T2 *++SP[1],B5:B4 + || MVC .S2 B11,RILC + LDDW .D1T1 *++A15[1],A7:A6 + || LDDW .D2T2 *++SP[1],B7:B6 + || MVC .S2 B10,ILC + + LDDW .D1T1 *++A15[1],A9:A8 + || LDDW .D2T2 *++SP[1],B9:B8 + || MVC .S2 B13,__rp + + LDDW .D1T1 *++A15[1],A11:A10 + || LDDW .D2T2 *++SP[1],B11:B10 + || MVC .S2 B12,CSR + + LDDW .D1T1 *++A15[1],A13:A12 + || LDDW .D2T2 *++SP[1],B13:B12 + + MV .D2X A15,SP + || MVKL .S1 current_ksp,A15 + MVKH .S1 current_ksp,A15 + || ADDAW .D1X SP,6,A14 + STW .D1T1 A14,*A15 ; save kernel stack pointer + + LDDW .D2T1 *++SP[1],A15:A14 + + B .S2 __rp ; return from interruption + LDDW .D2T2 *+SP[1],SP:DP + NOP 4 + .endm + + .section .text + + ;; + ;; Jump to schedule() then return to ret_from_exception + ;; +_reschedule: +#ifdef CONFIG_C6X_BIG_KERNEL + MVKL .S1 schedule,A0 + MVKH .S1 schedule,A0 + B .S2X A0 +#else + B .S1 schedule +#endif + ADDKPC .S2 ret_from_exception,B3,4 + + ;; + ;; Called before syscall handler when process is being debugged + ;; +tracesys_on: +#ifdef CONFIG_C6X_BIG_KERNEL + MVKL .S1 syscall_trace_entry,A0 + MVKH .S1 syscall_trace_entry,A0 + B .S2X A0 +#else + B .S1 syscall_trace_entry +#endif + ADDKPC .S2 ret_from_syscall_trace,B3,3 + ADD .S1X 8,SP,A4 + +ret_from_syscall_trace: + ;; tracing returns (possibly new) syscall number + MV .D2X A4,B0 + || MVK .S2 __NR_syscalls,B1 + CMPLTU .L2 B0,B1,B1 + + [!B1] BNOP .S2 ret_from_syscall_function,5 + || MVK .S1 -ENOSYS,A4 + + ;; reload syscall args from (possibly modified) stack frame + ;; and get syscall handler addr from sys_call_table: + LDW .D2T2 *+SP(REGS_B4+8),B4 + || MVKL .S2 sys_call_table,B1 + LDW .D2T1 *+SP(REGS_A6+8),A6 + || MVKH .S2 sys_call_table,B1 + LDW .D2T2 *+B1[B0],B0 + || MVKL .S2 ret_from_syscall_function,B3 + LDW .D2T2 *+SP(REGS_B6+8),B6 + || MVKH .S2 ret_from_syscall_function,B3 + LDW .D2T1 *+SP(REGS_A8+8),A8 + LDW .D2T2 *+SP(REGS_B8+8),B8 + NOP + ; B0 = sys_call_table[__NR_*] + BNOP .S2 B0,5 ; branch to syscall handler + || LDW .D2T1 *+SP(REGS_ORIG_A4+8),A4 + +syscall_exit_work: + AND .D1 _TIF_SYSCALL_TRACE,A2,A0 + [!A0] BNOP .S1 work_pending,5 + [A0] B .S2 syscall_trace_exit + ADDKPC .S2 resume_userspace,B3,1 + MVC .S2 CSR,B1 + SET .S2 B1,0,0,B1 + MVC .S2 B1,CSR ; enable ints + +work_pending: + AND .D1 _TIF_NEED_RESCHED,A2,A0 + [!A0] BNOP .S1 work_notifysig,5 + +work_resched: +#ifdef CONFIG_C6X_BIG_KERNEL + MVKL .S1 schedule,A1 + MVKH .S1 schedule,A1 + B .S2X A1 +#else + B .S2 schedule +#endif + ADDKPC .S2 work_rescheduled,B3,4 +work_rescheduled: + ;; make sure we don't miss an interrupt setting need_resched or + ;; sigpending between sampling and the rti + MASK_INT B2 + GET_THREAD_INFO A12 + LDW .D1T1 *+A12(THREAD_INFO_FLAGS),A2 + MVK .S1 _TIF_WORK_MASK,A1 + MVK .S1 _TIF_NEED_RESCHED,A3 + NOP 2 + AND .D1 A1,A2,A0 + || AND .S1 A3,A2,A1 + [!A0] BNOP .S1 restore_all,5 + [A1] BNOP .S1 work_resched,5 + +work_notifysig: + B .S2 do_notify_resume + LDW .D2T1 *+SP(REGS__END+8),A6 ; syscall flag + ADDKPC .S2 resume_userspace,B3,1 + ADD .S1X 8,SP,A4 ; pt_regs pointer is first arg + MV .D2X A2,B4 ; thread_info flags is second arg + + ;; + ;; On C64x+, the return way from exception and interrupt + ;; is a little bit different + ;; +ENTRY(ret_from_exception) +#ifdef CONFIG_PREEMPT + MASK_INT B2 +#endif + +ENTRY(ret_from_interrupt) + ;; + ;; Check if we are comming from user mode. + ;; + LDW .D2T2 *+SP(REGS_TSR+8),B0 + MVK .S2 0x40,B1 + NOP 3 + AND .D2 B0,B1,B0 + [!B0] BNOP .S2 resume_kernel,5 + +resume_userspace: + ;; make sure we don't miss an interrupt setting need_resched or + ;; sigpending between sampling and the rti + MASK_INT B2 + GET_THREAD_INFO A12 + LDW .D1T1 *+A12(THREAD_INFO_FLAGS),A2 + MVK .S1 _TIF_WORK_MASK,A1 + MVK .S1 _TIF_NEED_RESCHED,A3 + NOP 2 + AND .D1 A1,A2,A0 + [A0] BNOP .S1 work_pending,5 + BNOP .S1 restore_all,5 + + ;; + ;; System call handling + ;; B0 = syscall number (in sys_call_table) + ;; A4,B4,A6,B6,A8,B8 = arguments of the syscall function + ;; A4 is the return value register + ;; +system_call_saved: + MVK .L2 1,B2 + STW .D2T2 B2,*+SP(REGS__END+8) ; set syscall flag + MVC .S2 B2,ECR ; ack the software exception + + UNMASK_INT B2 ; re-enable global IT + +system_call_saved_noack: + ;; Check system call number + MVK .S2 __NR_syscalls,B1 +#ifdef CONFIG_C6X_BIG_KERNEL + || MVKL .S1 sys_ni_syscall,A0 +#endif + CMPLTU .L2 B0,B1,B1 +#ifdef CONFIG_C6X_BIG_KERNEL + || MVKH .S1 sys_ni_syscall,A0 +#endif + + ;; Check for ptrace + GET_THREAD_INFO A12 + +#ifdef CONFIG_C6X_BIG_KERNEL + [!B1] B .S2X A0 +#else + [!B1] B .S2 sys_ni_syscall +#endif + [!B1] ADDKPC .S2 ret_from_syscall_function,B3,4 + + ;; Get syscall handler addr from sys_call_table + ;; call tracesys_on or call syscall handler + LDW .D1T1 *+A12(THREAD_INFO_FLAGS),A2 + || MVKL .S2 sys_call_table,B1 + MVKH .S2 sys_call_table,B1 + LDW .D2T2 *+B1[B0],B0 + NOP 2 + ; A2 = thread_info flags + AND .D1 _TIF_SYSCALL_TRACE,A2,A2 + [A2] BNOP .S1 tracesys_on,5 + ;; B0 = _sys_call_table[__NR_*] + B .S2 B0 + ADDKPC .S2 ret_from_syscall_function,B3,4 + +ret_from_syscall_function: + STW .D2T1 A4,*+SP(REGS_A4+8) ; save return value in A4 + ; original A4 is in orig_A4 +syscall_exit: + ;; make sure we don't miss an interrupt setting need_resched or + ;; sigpending between sampling and the rti + MASK_INT B2 + LDW .D1T1 *+A12(THREAD_INFO_FLAGS),A2 + MVK .S1 _TIF_ALLWORK_MASK,A1 + NOP 3 + AND .D1 A1,A2,A2 ; check for work to do + [A2] BNOP .S1 syscall_exit_work,5 + +restore_all: + RESTORE_ALL NRP,NTSR + + ;; + ;; After a fork we jump here directly from resume, + ;; so that A4 contains the previous task structure. + ;; +ENTRY(ret_from_fork) +#ifdef CONFIG_C6X_BIG_KERNEL + MVKL .S1 schedule_tail,A0 + MVKH .S1 schedule_tail,A0 + B .S2X A0 +#else + B .S2 schedule_tail +#endif + ADDKPC .S2 ret_from_fork_2,B3,4 +ret_from_fork_2: + ;; return 0 in A4 for child process + GET_THREAD_INFO A12 + BNOP .S2 syscall_exit,3 + MVK .L2 0,B0 + STW .D2T2 B0,*+SP(REGS_A4+8) +ENDPROC(ret_from_fork) + + ;; + ;; These are the interrupt handlers, responsible for calling __do_IRQ() + ;; int6 is used for syscalls (see _system_call entry) + ;; + .macro SAVE_ALL_INT + SAVE_ALL IRP,ITSR + .endm + + .macro CALL_INT int +#ifdef CONFIG_C6X_BIG_KERNEL + MVKL .S1 c6x_do_IRQ,A0 + MVKH .S1 c6x_do_IRQ,A0 + BNOP .S2X A0,1 + MVK .S1 int,A4 + ADDAW .D2 SP,2,B4 + MVKL .S2 ret_from_interrupt,B3 + MVKH .S2 ret_from_interrupt,B3 +#else + CALLP .S2 c6x_do_IRQ,B3 + || MVK .S1 int,A4 + || ADDAW .D2 SP,2,B4 + B .S1 ret_from_interrupt + NOP 5 +#endif + .endm + +ENTRY(_int4_handler) + SAVE_ALL_INT + CALL_INT 4 +ENDPROC(_int4_handler) + +ENTRY(_int5_handler) + SAVE_ALL_INT + CALL_INT 5 +ENDPROC(_int5_handler) + +ENTRY(_int6_handler) + SAVE_ALL_INT + CALL_INT 6 +ENDPROC(_int6_handler) + +ENTRY(_int7_handler) + SAVE_ALL_INT + CALL_INT 7 +ENDPROC(_int7_handler) + +ENTRY(_int8_handler) + SAVE_ALL_INT + CALL_INT 8 +ENDPROC(_int8_handler) + +ENTRY(_int9_handler) + SAVE_ALL_INT + CALL_INT 9 +ENDPROC(_int9_handler) + +ENTRY(_int10_handler) + SAVE_ALL_INT + CALL_INT 10 +ENDPROC(_int10_handler) + +ENTRY(_int11_handler) + SAVE_ALL_INT + CALL_INT 11 +ENDPROC(_int11_handler) + +ENTRY(_int12_handler) + SAVE_ALL_INT + CALL_INT 12 +ENDPROC(_int12_handler) + +ENTRY(_int13_handler) + SAVE_ALL_INT + CALL_INT 13 +ENDPROC(_int13_handler) + +ENTRY(_int14_handler) + SAVE_ALL_INT + CALL_INT 14 +ENDPROC(_int14_handler) + +ENTRY(_int15_handler) + SAVE_ALL_INT + CALL_INT 15 +ENDPROC(_int15_handler) + + ;; + ;; Handler for uninitialized and spurious interrupts + ;; +ENTRY(_bad_interrupt) + B .S2 IRP + NOP 5 +ENDPROC(_bad_interrupt) + + ;; + ;; Entry for NMI/exceptions/syscall + ;; +ENTRY(_nmi_handler) + SAVE_ALL NRP,NTSR + + MVC .S2 EFR,B2 + CMPEQ .L2 1,B2,B2 + || MVC .S2 TSR,B1 + CLR .S2 B1,10,10,B1 + MVC .S2 B1,TSR +#ifdef CONFIG_C6X_BIG_KERNEL + [!B2] MVKL .S1 process_exception,A0 + [!B2] MVKH .S1 process_exception,A0 + [!B2] B .S2X A0 +#else + [!B2] B .S2 process_exception +#endif + [B2] B .S2 system_call_saved + [!B2] ADDAW .D2 SP,2,B1 + [!B2] MV .D1X B1,A4 + ADDKPC .S2 ret_from_trap,B3,2 + +ret_from_trap: + MV .D2X A4,B0 + [!B0] BNOP .S2 ret_from_exception,5 + +#ifdef CONFIG_C6X_BIG_KERNEL + MVKL .S2 system_call_saved_noack,B3 + MVKH .S2 system_call_saved_noack,B3 +#endif + LDW .D2T2 *+SP(REGS_B0+8),B0 + LDW .D2T1 *+SP(REGS_A4+8),A4 + LDW .D2T2 *+SP(REGS_B4+8),B4 + LDW .D2T1 *+SP(REGS_A6+8),A6 + LDW .D2T2 *+SP(REGS_B6+8),B6 + LDW .D2T1 *+SP(REGS_A8+8),A8 +#ifdef CONFIG_C6X_BIG_KERNEL + || B .S2 B3 +#else + || B .S2 system_call_saved_noack +#endif + LDW .D2T2 *+SP(REGS_B8+8),B8 + NOP 4 +ENDPROC(_nmi_handler) + + ;; + ;; Jump to schedule() then return to ret_from_isr + ;; +#ifdef CONFIG_PREEMPT +resume_kernel: + GET_THREAD_INFO A12 + LDW .D1T1 *+A12(THREAD_INFO_PREEMPT_COUNT),A1 + NOP 4 + [A1] BNOP .S2 restore_all,5 + +preempt_schedule: + GET_THREAD_INFO A2 + LDW .D1T1 *+A2(THREAD_INFO_FLAGS),A1 +#ifdef CONFIG_C6X_BIG_KERNEL + MVKL .S2 preempt_schedule_irq,B0 + MVKH .S2 preempt_schedule_irq,B0 + NOP 2 +#else + NOP 4 +#endif + AND .D1 _TIF_NEED_RESCHED,A1,A1 + [!A1] BNOP .S2 restore_all,5 +#ifdef CONFIG_C6X_BIG_KERNEL + B .S2 B0 +#else + B .S2 preempt_schedule_irq +#endif + ADDKPC .S2 preempt_schedule,B3,4 +#endif /* CONFIG_PREEMPT */ + +ENTRY(enable_exception) + DINT + MVC .S2 TSR,B0 + MVC .S2 B3,NRP + MVK .L2 0xc,B1 + OR .D2 B0,B1,B0 + MVC .S2 B0,TSR ; Set GEE and XEN in TSR + B .S2 NRP + NOP 5 +ENDPROC(enable_exception) + +ENTRY(sys_sigaltstack) +#ifdef CONFIG_C6X_BIG_KERNEL + MVKL .S1 do_sigaltstack,A0 ; branch to do_sigaltstack + MVKH .S1 do_sigaltstack,A0 + B .S2X A0 +#else + B .S2 do_sigaltstack +#endif + LDW .D2T1 *+SP(REGS_SP+8),A6 + NOP 4 +ENDPROC(sys_sigaltstack) + + ;; kernel_execve +ENTRY(kernel_execve) + MVK .S2 __NR_execve,B0 + SWE + BNOP .S2 B3,5 +ENDPROC(kernel_execve) + + ;; + ;; Special system calls + ;; return address is in B3 + ;; +ENTRY(sys_clone) + ADD .D1X SP,8,A4 +#ifdef CONFIG_C6X_BIG_KERNEL + || MVKL .S1 sys_c6x_clone,A0 + MVKH .S1 sys_c6x_clone,A0 + BNOP .S2X A0,5 +#else + || B .S2 sys_c6x_clone + NOP 5 +#endif +ENDPROC(sys_clone) + +ENTRY(sys_rt_sigreturn) + ADD .D1X SP,8,A4 +#ifdef CONFIG_C6X_BIG_KERNEL + || MVKL .S1 do_rt_sigreturn,A0 + MVKH .S1 do_rt_sigreturn,A0 + BNOP .S2X A0,5 +#else + || B .S2 do_rt_sigreturn + NOP 5 +#endif +ENDPROC(sys_rt_sigreturn) + +ENTRY(sys_execve) + ADDAW .D2 SP,2,B6 ; put regs addr in 4th parameter + ; & adjust regs stack addr + LDW .D2T2 *+SP(REGS_B4+8),B4 + + ;; c6x_execve(char *name, char **argv, + ;; char **envp, struct pt_regs *regs) +#ifdef CONFIG_C6X_BIG_KERNEL + || MVKL .S1 sys_c6x_execve,A0 + MVKH .S1 sys_c6x_execve,A0 + B .S2X A0 +#else + || B .S2 sys_c6x_execve +#endif + STW .D2T2 B3,*SP--[2] + ADDKPC .S2 ret_from_c6x_execve,B3,3 + +ret_from_c6x_execve: + LDW .D2T2 *++SP[2],B3 + NOP 4 + BNOP .S2 B3,5 +ENDPROC(sys_execve) + +ENTRY(sys_pread_c6x) + MV .D2X A8,B7 +#ifdef CONFIG_C6X_BIG_KERNEL + || MVKL .S1 sys_pread64,A0 + MVKH .S1 sys_pread64,A0 + BNOP .S2X A0,5 +#else + || B .S2 sys_pread64 + NOP 5 +#endif +ENDPROC(sys_pread_c6x) + +ENTRY(sys_pwrite_c6x) + MV .D2X A8,B7 +#ifdef CONFIG_C6X_BIG_KERNEL + || MVKL .S1 sys_pwrite64,A0 + MVKH .S1 sys_pwrite64,A0 + BNOP .S2X A0,5 +#else + || B .S2 sys_pwrite64 + NOP 5 +#endif +ENDPROC(sys_pwrite_c6x) + +;; On Entry +;; A4 - path +;; B4 - offset_lo (LE), offset_hi (BE) +;; A6 - offset_lo (BE), offset_hi (LE) +ENTRY(sys_truncate64_c6x) +#ifdef CONFIG_CPU_BIG_ENDIAN + MV .S2 B4,B5 + MV .D2X A6,B4 +#else + MV .D2X A6,B5 +#endif +#ifdef CONFIG_C6X_BIG_KERNEL + || MVKL .S1 sys_truncate64,A0 + MVKH .S1 sys_truncate64,A0 + BNOP .S2X A0,5 +#else + || B .S2 sys_truncate64 + NOP 5 +#endif +ENDPROC(sys_truncate64_c6x) + +;; On Entry +;; A4 - fd +;; B4 - offset_lo (LE), offset_hi (BE) +;; A6 - offset_lo (BE), offset_hi (LE) +ENTRY(sys_ftruncate64_c6x) +#ifdef CONFIG_CPU_BIG_ENDIAN + MV .S2 B4,B5 + MV .D2X A6,B4 +#else + MV .D2X A6,B5 +#endif +#ifdef CONFIG_C6X_BIG_KERNEL + || MVKL .S1 sys_ftruncate64,A0 + MVKH .S1 sys_ftruncate64,A0 + BNOP .S2X A0,5 +#else + || B .S2 sys_ftruncate64 + NOP 5 +#endif +ENDPROC(sys_ftruncate64_c6x) + +#ifdef __ARCH_WANT_SYSCALL_OFF_T +;; On Entry +;; A4 - fd +;; B4 - offset_lo (LE), offset_hi (BE) +;; A6 - offset_lo (BE), offset_hi (LE) +;; B6 - len +;; A8 - advice +ENTRY(sys_fadvise64_c6x) +#ifdef CONFIG_C6X_BIG_KERNEL + MVKL .S1 sys_fadvise64,A0 + MVKH .S1 sys_fadvise64,A0 + BNOP .S2X A0,2 +#else + B .S2 sys_fadvise64 + NOP 2 +#endif +#ifdef CONFIG_CPU_BIG_ENDIAN + MV .L2 B4,B5 + || MV .D2X A6,B4 +#else + MV .D2X A6,B5 +#endif + MV .D1X B6,A6 + MV .D2X A8,B6 +#endif +ENDPROC(sys_fadvise64_c6x) + +;; On Entry +;; A4 - fd +;; B4 - offset_lo (LE), offset_hi (BE) +;; A6 - offset_lo (BE), offset_hi (LE) +;; B6 - len_lo (LE), len_hi (BE) +;; A8 - len_lo (BE), len_hi (LE) +;; B8 - advice +ENTRY(sys_fadvise64_64_c6x) +#ifdef CONFIG_C6X_BIG_KERNEL + MVKL .S1 sys_fadvise64_64,A0 + MVKH .S1 sys_fadvise64_64,A0 + BNOP .S2X A0,2 +#else + B .S2 sys_fadvise64_64 + NOP 2 +#endif +#ifdef CONFIG_CPU_BIG_ENDIAN + MV .L2 B4,B5 + || MV .D2X A6,B4 + MV .L1 A8,A6 + || MV .D1X B6,A7 +#else + MV .D2X A6,B5 + MV .L1 A8,A7 + || MV .D1X B6,A6 +#endif + MV .L2 B8,B6 +ENDPROC(sys_fadvise64_64_c6x) + +;; On Entry +;; A4 - fd +;; B4 - mode +;; A6 - offset_hi +;; B6 - offset_lo +;; A8 - len_hi +;; B8 - len_lo +ENTRY(sys_fallocate_c6x) +#ifdef CONFIG_C6X_BIG_KERNEL + MVKL .S1 sys_fallocate,A0 + MVKH .S1 sys_fallocate,A0 + BNOP .S2X A0,1 +#else + B .S2 sys_fallocate + NOP +#endif + MV .D1 A6,A7 + MV .D1X B6,A6 + MV .D2X A8,B7 + MV .D2 B8,B6 +ENDPROC(sys_fallocate_c6x) + + ;; put this in .neardata for faster access when using DSBT mode + .section .neardata,"aw",@progbits + .global current_ksp + .hidden current_ksp +current_ksp: + .word init_thread_union + THREAD_START_SP diff --git a/arch/c6x/kernel/head.S b/arch/c6x/kernel/head.S new file mode 100644 index 000000000000..133eab6edf6b --- /dev/null +++ b/arch/c6x/kernel/head.S @@ -0,0 +1,84 @@ +; +; Port on Texas Instruments TMS320C6x architecture +; +; Copyright (C) 2004, 2009, 2010, 2011 Texas Instruments Incorporated +; Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) +; +; This program is free software; you can redistribute it and/or modify +; it under the terms of the GNU General Public License version 2 as +; published by the Free Software Foundation. +; +#include <linux/linkage.h> +#include <linux/of_fdt.h> +#include <asm/asm-offsets.h> + + __HEAD +ENTRY(_c_int00) + ;; Save magic and pointer + MV .S1 A4,A10 + MV .S2 B4,B10 + MVKL .S2 __bss_start,B5 + MVKH .S2 __bss_start,B5 + MVKL .S2 __bss_stop,B6 + MVKH .S2 __bss_stop,B6 + SUB .L2 B6,B5,B6 ; bss size + + ;; Set the stack pointer + MVKL .S2 current_ksp,B0 + MVKH .S2 current_ksp,B0 + LDW .D2T2 *B0,B15 + + ;; clear bss + SHR .S2 B6,3,B0 ; number of dwords to clear + ZERO .L2 B13 + ZERO .L2 B12 +bss_loop: + BDEC .S2 bss_loop,B0 + NOP 3 + CMPLT .L2 B0,0,B1 + [!B1] STDW .D2T2 B13:B12,*B5++[1] + + NOP 4 + AND .D2 ~7,B15,B15 + + ;; Clear GIE and PGIE + MVC .S2 CSR,B2 + CLR .S2 B2,0,1,B2 + MVC .S2 B2,CSR + MVC .S2 TSR,B2 + CLR .S2 B2,0,1,B2 + MVC .S2 B2,TSR + MVC .S2 ITSR,B2 + CLR .S2 B2,0,1,B2 + MVC .S2 B2,ITSR + MVC .S2 NTSR,B2 + CLR .S2 B2,0,1,B2 + MVC .S2 B2,NTSR + + ;; pass DTB pointer to machine_init (or zero if none) + MVKL .S1 OF_DT_HEADER,A0 + MVKH .S1 OF_DT_HEADER,A0 + CMPEQ .L1 A10,A0,A0 + [A0] MV .S1X B10,A4 + [!A0] MVK .S1 0,A4 + +#ifdef CONFIG_C6X_BIG_KERNEL + MVKL .S1 machine_init,A0 + MVKH .S1 machine_init,A0 + B .S2X A0 + ADDKPC .S2 0f,B3,4 +0: +#else + CALLP .S2 machine_init,B3 +#endif + + ;; Jump to Linux init +#ifdef CONFIG_C6X_BIG_KERNEL + MVKL .S1 start_kernel,A0 + MVKH .S1 start_kernel,A0 + B .S2X A0 +#else + B .S2 start_kernel +#endif + NOP 5 +L1: BNOP .S2 L1,5 diff --git a/arch/c6x/kernel/irq.c b/arch/c6x/kernel/irq.c new file mode 100644 index 000000000000..0929e4b2b244 --- /dev/null +++ b/arch/c6x/kernel/irq.c @@ -0,0 +1,728 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated + * + * This borrows heavily from powerpc version, which is: + * + * Derived from arch/i386/kernel/irq.c + * Copyright (C) 1992 Linus Torvalds + * Adapted from arch/i386 by Gary Thomas + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * Updated and modified by Cort Dougan <cort@fsmlabs.com> + * Copyright (C) 1996-2001 Cort Dougan + * Adapted for Power Macintosh by Paul Mackerras + * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/slab.h> +#include <linux/seq_file.h> +#include <linux/radix-tree.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/interrupt.h> +#include <linux/kernel_stat.h> + +#include <asm/megamod-pic.h> + +unsigned long irq_err_count; + +static DEFINE_RAW_SPINLOCK(core_irq_lock); + +static void mask_core_irq(struct irq_data *data) +{ + unsigned int prio = data->irq; + + BUG_ON(prio < 4 || prio >= NR_PRIORITY_IRQS); + + raw_spin_lock(&core_irq_lock); + and_creg(IER, ~(1 << prio)); + raw_spin_unlock(&core_irq_lock); +} + +static void unmask_core_irq(struct irq_data *data) +{ + unsigned int prio = data->irq; + + raw_spin_lock(&core_irq_lock); + or_creg(IER, 1 << prio); + raw_spin_unlock(&core_irq_lock); +} + +static struct irq_chip core_chip = { + .name = "core", + .irq_mask = mask_core_irq, + .irq_unmask = unmask_core_irq, +}; + +asmlinkage void c6x_do_IRQ(unsigned int prio, struct pt_regs *regs) +{ + struct pt_regs *old_regs = set_irq_regs(regs); + + irq_enter(); + + BUG_ON(prio < 4 || prio >= NR_PRIORITY_IRQS); + + generic_handle_irq(prio); + + irq_exit(); + + set_irq_regs(old_regs); +} + +static struct irq_host *core_host; + +static int core_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + if (hw < 4 || hw >= NR_PRIORITY_IRQS) + return -EINVAL; + + irq_set_status_flags(virq, IRQ_LEVEL); + irq_set_chip_and_handler(virq, &core_chip, handle_level_irq); + return 0; +} + +static struct irq_host_ops core_host_ops = { + .map = core_host_map, +}; + +void __init init_IRQ(void) +{ + struct device_node *np; + + /* Mask all priority IRQs */ + and_creg(IER, ~0xfff0); + + np = of_find_compatible_node(NULL, NULL, "ti,c64x+core-pic"); + if (np != NULL) { + /* create the core host */ + core_host = irq_alloc_host(np, IRQ_HOST_MAP_PRIORITY, 0, + &core_host_ops, 0); + if (core_host) + irq_set_default_host(core_host); + of_node_put(np); + } + + printk(KERN_INFO "Core interrupt controller initialized\n"); + + /* now we're ready for other SoC controllers */ + megamod_pic_init(); + + /* Clear all general IRQ flags */ + set_creg(ICR, 0xfff0); +} + +void ack_bad_irq(int irq) +{ + printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq); + irq_err_count++; +} + +int arch_show_interrupts(struct seq_file *p, int prec) +{ + seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count); + return 0; +} + +/* + * IRQ controller and virtual interrupts + */ + +/* The main irq map itself is an array of NR_IRQ entries containing the + * associate host and irq number. An entry with a host of NULL is free. + * An entry can be allocated if it's free, the allocator always then sets + * hwirq first to the host's invalid irq number and then fills ops. + */ +struct irq_map_entry { + irq_hw_number_t hwirq; + struct irq_host *host; +}; + +static LIST_HEAD(irq_hosts); +static DEFINE_RAW_SPINLOCK(irq_big_lock); +static DEFINE_MUTEX(revmap_trees_mutex); +static struct irq_map_entry irq_map[NR_IRQS]; +static unsigned int irq_virq_count = NR_IRQS; +static struct irq_host *irq_default_host; + +irq_hw_number_t irqd_to_hwirq(struct irq_data *d) +{ + return irq_map[d->irq].hwirq; +} +EXPORT_SYMBOL_GPL(irqd_to_hwirq); + +irq_hw_number_t virq_to_hw(unsigned int virq) +{ + return irq_map[virq].hwirq; +} +EXPORT_SYMBOL_GPL(virq_to_hw); + +bool virq_is_host(unsigned int virq, struct irq_host *host) +{ + return irq_map[virq].host == host; +} +EXPORT_SYMBOL_GPL(virq_is_host); + +static int default_irq_host_match(struct irq_host *h, struct device_node *np) +{ + return h->of_node != NULL && h->of_node == np; +} + +struct irq_host *irq_alloc_host(struct device_node *of_node, + unsigned int revmap_type, + unsigned int revmap_arg, + struct irq_host_ops *ops, + irq_hw_number_t inval_irq) +{ + struct irq_host *host; + unsigned int size = sizeof(struct irq_host); + unsigned int i; + unsigned int *rmap; + unsigned long flags; + + /* Allocate structure and revmap table if using linear mapping */ + if (revmap_type == IRQ_HOST_MAP_LINEAR) + size += revmap_arg * sizeof(unsigned int); + host = kzalloc(size, GFP_KERNEL); + if (host == NULL) + return NULL; + + /* Fill structure */ + host->revmap_type = revmap_type; + host->inval_irq = inval_irq; + host->ops = ops; + host->of_node = of_node_get(of_node); + + if (host->ops->match == NULL) + host->ops->match = default_irq_host_match; + + raw_spin_lock_irqsave(&irq_big_lock, flags); + + /* Check for the priority controller. */ + if (revmap_type == IRQ_HOST_MAP_PRIORITY) { + if (irq_map[0].host != NULL) { + raw_spin_unlock_irqrestore(&irq_big_lock, flags); + of_node_put(host->of_node); + kfree(host); + return NULL; + } + irq_map[0].host = host; + } + + list_add(&host->link, &irq_hosts); + raw_spin_unlock_irqrestore(&irq_big_lock, flags); + + /* Additional setups per revmap type */ + switch (revmap_type) { + case IRQ_HOST_MAP_PRIORITY: + /* 0 is always the invalid number for priority */ + host->inval_irq = 0; + /* setup us as the host for all priority interrupts */ + for (i = 1; i < NR_PRIORITY_IRQS; i++) { + irq_map[i].hwirq = i; + smp_wmb(); + irq_map[i].host = host; + smp_wmb(); + + ops->map(host, i, i); + } + break; + case IRQ_HOST_MAP_LINEAR: + rmap = (unsigned int *)(host + 1); + for (i = 0; i < revmap_arg; i++) + rmap[i] = NO_IRQ; + host->revmap_data.linear.size = revmap_arg; + smp_wmb(); + host->revmap_data.linear.revmap = rmap; + break; + case IRQ_HOST_MAP_TREE: + INIT_RADIX_TREE(&host->revmap_data.tree, GFP_KERNEL); + break; + default: + break; + } + + pr_debug("irq: Allocated host of type %d @0x%p\n", revmap_type, host); + + return host; +} + +struct irq_host *irq_find_host(struct device_node *node) +{ + struct irq_host *h, *found = NULL; + unsigned long flags; + + /* We might want to match the legacy controller last since + * it might potentially be set to match all interrupts in + * the absence of a device node. This isn't a problem so far + * yet though... + */ + raw_spin_lock_irqsave(&irq_big_lock, flags); + list_for_each_entry(h, &irq_hosts, link) + if (h->ops->match(h, node)) { + found = h; + break; + } + raw_spin_unlock_irqrestore(&irq_big_lock, flags); + return found; +} +EXPORT_SYMBOL_GPL(irq_find_host); + +void irq_set_default_host(struct irq_host *host) +{ + pr_debug("irq: Default host set to @0x%p\n", host); + + irq_default_host = host; +} + +void irq_set_virq_count(unsigned int count) +{ + pr_debug("irq: Trying to set virq count to %d\n", count); + + BUG_ON(count < NR_PRIORITY_IRQS); + if (count < NR_IRQS) + irq_virq_count = count; +} + +static int irq_setup_virq(struct irq_host *host, unsigned int virq, + irq_hw_number_t hwirq) +{ + int res; + + res = irq_alloc_desc_at(virq, 0); + if (res != virq) { + pr_debug("irq: -> allocating desc failed\n"); + goto error; + } + + /* map it */ + smp_wmb(); + irq_map[virq].hwirq = hwirq; + smp_mb(); + + if (host->ops->map(host, virq, hwirq)) { + pr_debug("irq: -> mapping failed, freeing\n"); + goto errdesc; + } + + irq_clear_status_flags(virq, IRQ_NOREQUEST); + + return 0; + +errdesc: + irq_free_descs(virq, 1); +error: + irq_free_virt(virq, 1); + return -1; +} + +unsigned int irq_create_direct_mapping(struct irq_host *host) +{ + unsigned int virq; + + if (host == NULL) + host = irq_default_host; + + BUG_ON(host == NULL); + WARN_ON(host->revmap_type != IRQ_HOST_MAP_NOMAP); + + virq = irq_alloc_virt(host, 1, 0); + if (virq == NO_IRQ) { + pr_debug("irq: create_direct virq allocation failed\n"); + return NO_IRQ; + } + + pr_debug("irq: create_direct obtained virq %d\n", virq); + + if (irq_setup_virq(host, virq, virq)) + return NO_IRQ; + + return virq; +} + +unsigned int irq_create_mapping(struct irq_host *host, + irq_hw_number_t hwirq) +{ + unsigned int virq, hint; + + pr_debug("irq: irq_create_mapping(0x%p, 0x%lx)\n", host, hwirq); + + /* Look for default host if nececssary */ + if (host == NULL) + host = irq_default_host; + if (host == NULL) { + printk(KERN_WARNING "irq_create_mapping called for" + " NULL host, hwirq=%lx\n", hwirq); + WARN_ON(1); + return NO_IRQ; + } + pr_debug("irq: -> using host @%p\n", host); + + /* Check if mapping already exists */ + virq = irq_find_mapping(host, hwirq); + if (virq != NO_IRQ) { + pr_debug("irq: -> existing mapping on virq %d\n", virq); + return virq; + } + + /* Allocate a virtual interrupt number */ + hint = hwirq % irq_virq_count; + virq = irq_alloc_virt(host, 1, hint); + if (virq == NO_IRQ) { + pr_debug("irq: -> virq allocation failed\n"); + return NO_IRQ; + } + + if (irq_setup_virq(host, virq, hwirq)) + return NO_IRQ; + + pr_debug("irq: irq %lu on host %s mapped to virtual irq %u\n", + hwirq, host->of_node ? host->of_node->full_name : "null", virq); + + return virq; +} +EXPORT_SYMBOL_GPL(irq_create_mapping); + +unsigned int irq_create_of_mapping(struct device_node *controller, + const u32 *intspec, unsigned int intsize) +{ + struct irq_host *host; + irq_hw_number_t hwirq; + unsigned int type = IRQ_TYPE_NONE; + unsigned int virq; + + if (controller == NULL) + host = irq_default_host; + else + host = irq_find_host(controller); + if (host == NULL) { + printk(KERN_WARNING "irq: no irq host found for %s !\n", + controller->full_name); + return NO_IRQ; + } + + /* If host has no translation, then we assume interrupt line */ + if (host->ops->xlate == NULL) + hwirq = intspec[0]; + else { + if (host->ops->xlate(host, controller, intspec, intsize, + &hwirq, &type)) + return NO_IRQ; + } + + /* Create mapping */ + virq = irq_create_mapping(host, hwirq); + if (virq == NO_IRQ) + return virq; + + /* Set type if specified and different than the current one */ + if (type != IRQ_TYPE_NONE && + type != (irqd_get_trigger_type(irq_get_irq_data(virq)))) + irq_set_irq_type(virq, type); + return virq; +} +EXPORT_SYMBOL_GPL(irq_create_of_mapping); + +void irq_dispose_mapping(unsigned int virq) +{ + struct irq_host *host; + irq_hw_number_t hwirq; + + if (virq == NO_IRQ) + return; + + /* Never unmap priority interrupts */ + if (virq < NR_PRIORITY_IRQS) + return; + + host = irq_map[virq].host; + if (WARN_ON(host == NULL)) + return; + + irq_set_status_flags(virq, IRQ_NOREQUEST); + + /* remove chip and handler */ + irq_set_chip_and_handler(virq, NULL, NULL); + + /* Make sure it's completed */ + synchronize_irq(virq); + + /* Tell the PIC about it */ + if (host->ops->unmap) + host->ops->unmap(host, virq); + smp_mb(); + + /* Clear reverse map */ + hwirq = irq_map[virq].hwirq; + switch (host->revmap_type) { + case IRQ_HOST_MAP_LINEAR: + if (hwirq < host->revmap_data.linear.size) + host->revmap_data.linear.revmap[hwirq] = NO_IRQ; + break; + case IRQ_HOST_MAP_TREE: + mutex_lock(&revmap_trees_mutex); + radix_tree_delete(&host->revmap_data.tree, hwirq); + mutex_unlock(&revmap_trees_mutex); + break; + } + + /* Destroy map */ + smp_mb(); + irq_map[virq].hwirq = host->inval_irq; + + irq_free_descs(virq, 1); + /* Free it */ + irq_free_virt(virq, 1); +} +EXPORT_SYMBOL_GPL(irq_dispose_mapping); + +unsigned int irq_find_mapping(struct irq_host *host, + irq_hw_number_t hwirq) +{ + unsigned int i; + unsigned int hint = hwirq % irq_virq_count; + + /* Look for default host if nececssary */ + if (host == NULL) + host = irq_default_host; + if (host == NULL) + return NO_IRQ; + + /* Slow path does a linear search of the map */ + i = hint; + do { + if (irq_map[i].host == host && + irq_map[i].hwirq == hwirq) + return i; + i++; + if (i >= irq_virq_count) + i = 4; + } while (i != hint); + return NO_IRQ; +} +EXPORT_SYMBOL_GPL(irq_find_mapping); + +unsigned int irq_radix_revmap_lookup(struct irq_host *host, + irq_hw_number_t hwirq) +{ + struct irq_map_entry *ptr; + unsigned int virq; + + if (WARN_ON_ONCE(host->revmap_type != IRQ_HOST_MAP_TREE)) + return irq_find_mapping(host, hwirq); + + /* + * The ptr returned references the static global irq_map. + * but freeing an irq can delete nodes along the path to + * do the lookup via call_rcu. + */ + rcu_read_lock(); + ptr = radix_tree_lookup(&host->revmap_data.tree, hwirq); + rcu_read_unlock(); + + /* + * If found in radix tree, then fine. + * Else fallback to linear lookup - this should not happen in practice + * as it means that we failed to insert the node in the radix tree. + */ + if (ptr) + virq = ptr - irq_map; + else + virq = irq_find_mapping(host, hwirq); + + return virq; +} + +void irq_radix_revmap_insert(struct irq_host *host, unsigned int virq, + irq_hw_number_t hwirq) +{ + if (WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE)) + return; + + if (virq != NO_IRQ) { + mutex_lock(&revmap_trees_mutex); + radix_tree_insert(&host->revmap_data.tree, hwirq, + &irq_map[virq]); + mutex_unlock(&revmap_trees_mutex); + } +} + +unsigned int irq_linear_revmap(struct irq_host *host, + irq_hw_number_t hwirq) +{ + unsigned int *revmap; + + if (WARN_ON_ONCE(host->revmap_type != IRQ_HOST_MAP_LINEAR)) + return irq_find_mapping(host, hwirq); + + /* Check revmap bounds */ + if (unlikely(hwirq >= host->revmap_data.linear.size)) + return irq_find_mapping(host, hwirq); + + /* Check if revmap was allocated */ + revmap = host->revmap_data.linear.revmap; + if (unlikely(revmap == NULL)) + return irq_find_mapping(host, hwirq); + + /* Fill up revmap with slow path if no mapping found */ + if (unlikely(revmap[hwirq] == NO_IRQ)) + revmap[hwirq] = irq_find_mapping(host, hwirq); + + return revmap[hwirq]; +} + +unsigned int irq_alloc_virt(struct irq_host *host, + unsigned int count, + unsigned int hint) +{ + unsigned long flags; + unsigned int i, j, found = NO_IRQ; + + if (count == 0 || count > (irq_virq_count - NR_PRIORITY_IRQS)) + return NO_IRQ; + + raw_spin_lock_irqsave(&irq_big_lock, flags); + + /* Use hint for 1 interrupt if any */ + if (count == 1 && hint >= NR_PRIORITY_IRQS && + hint < irq_virq_count && irq_map[hint].host == NULL) { + found = hint; + goto hint_found; + } + + /* Look for count consecutive numbers in the allocatable + * (non-legacy) space + */ + for (i = NR_PRIORITY_IRQS, j = 0; i < irq_virq_count; i++) { + if (irq_map[i].host != NULL) + j = 0; + else + j++; + + if (j == count) { + found = i - count + 1; + break; + } + } + if (found == NO_IRQ) { + raw_spin_unlock_irqrestore(&irq_big_lock, flags); + return NO_IRQ; + } + hint_found: + for (i = found; i < (found + count); i++) { + irq_map[i].hwirq = host->inval_irq; + smp_wmb(); + irq_map[i].host = host; + } + raw_spin_unlock_irqrestore(&irq_big_lock, flags); + return found; +} + +void irq_free_virt(unsigned int virq, unsigned int count) +{ + unsigned long flags; + unsigned int i; + + WARN_ON(virq < NR_PRIORITY_IRQS); + WARN_ON(count == 0 || (virq + count) > irq_virq_count); + + if (virq < NR_PRIORITY_IRQS) { + if (virq + count < NR_PRIORITY_IRQS) + return; + count -= NR_PRIORITY_IRQS - virq; + virq = NR_PRIORITY_IRQS; + } + + if (count > irq_virq_count || virq > irq_virq_count - count) { + if (virq > irq_virq_count) + return; + count = irq_virq_count - virq; + } + + raw_spin_lock_irqsave(&irq_big_lock, flags); + for (i = virq; i < (virq + count); i++) { + struct irq_host *host; + + host = irq_map[i].host; + irq_map[i].hwirq = host->inval_irq; + smp_wmb(); + irq_map[i].host = NULL; + } + raw_spin_unlock_irqrestore(&irq_big_lock, flags); +} + +#ifdef CONFIG_VIRQ_DEBUG +static int virq_debug_show(struct seq_file *m, void *private) +{ + unsigned long flags; + struct irq_desc *desc; + const char *p; + static const char none[] = "none"; + void *data; + int i; + + seq_printf(m, "%-5s %-7s %-15s %-18s %s\n", "virq", "hwirq", + "chip name", "chip data", "host name"); + + for (i = 1; i < nr_irqs; i++) { + desc = irq_to_desc(i); + if (!desc) + continue; + + raw_spin_lock_irqsave(&desc->lock, flags); + + if (desc->action && desc->action->handler) { + struct irq_chip *chip; + + seq_printf(m, "%5d ", i); + seq_printf(m, "0x%05lx ", irq_map[i].hwirq); + + chip = irq_desc_get_chip(desc); + if (chip && chip->name) + p = chip->name; + else + p = none; + seq_printf(m, "%-15s ", p); + + data = irq_desc_get_chip_data(desc); + seq_printf(m, "0x%16p ", data); + + if (irq_map[i].host && irq_map[i].host->of_node) + p = irq_map[i].host->of_node->full_name; + else + p = none; + seq_printf(m, "%s\n", p); + } + + raw_spin_unlock_irqrestore(&desc->lock, flags); + } + + return 0; +} + +static int virq_debug_open(struct inode *inode, struct file *file) +{ + return single_open(file, virq_debug_show, inode->i_private); +} + +static const struct file_operations virq_debug_fops = { + .open = virq_debug_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init irq_debugfs_init(void) +{ + if (debugfs_create_file("virq_mapping", S_IRUGO, powerpc_debugfs_root, + NULL, &virq_debug_fops) == NULL) + return -ENOMEM; + + return 0; +} +device_initcall(irq_debugfs_init); +#endif /* CONFIG_VIRQ_DEBUG */ diff --git a/arch/c6x/kernel/module.c b/arch/c6x/kernel/module.c new file mode 100644 index 000000000000..5fc03f18f56c --- /dev/null +++ b/arch/c6x/kernel/module.c @@ -0,0 +1,123 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2005, 2009, 2010, 2011 Texas Instruments Incorporated + * Author: Thomas Charleux (thomas.charleux@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/moduleloader.h> +#include <linux/elf.h> +#include <linux/vmalloc.h> +#include <linux/kernel.h> + +static inline int fixup_pcr(u32 *ip, Elf32_Addr dest, u32 maskbits, int shift) +{ + u32 opcode; + long ep = (long)ip & ~31; + long delta = ((long)dest - ep) >> 2; + long mask = (1 << maskbits) - 1; + + if ((delta >> (maskbits - 1)) == 0 || + (delta >> (maskbits - 1)) == -1) { + opcode = *ip; + opcode &= ~(mask << shift); + opcode |= ((delta & mask) << shift); + *ip = opcode; + + pr_debug("REL PCR_S%d[%p] dest[%p] opcode[%08x]\n", + maskbits, ip, (void *)dest, opcode); + + return 0; + } + pr_err("PCR_S%d reloc %p -> %p out of range!\n", + maskbits, ip, (void *)dest); + + return -1; +} + +/* + * apply a RELA relocation + */ +int apply_relocate_add(Elf32_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + Elf32_Rela *rel = (void *) sechdrs[relsec].sh_addr; + Elf_Sym *sym; + u32 *location, opcode; + unsigned int i; + Elf32_Addr v; + Elf_Addr offset = 0; + + pr_debug("Applying relocate section %u to %u with offset 0x%x\n", + relsec, sechdrs[relsec].sh_info, offset); + + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { + /* This is where to make the change */ + location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + rel[i].r_offset - offset; + + /* This is the symbol it is referring to. Note that all + undefined symbols have been resolved. */ + sym = (Elf_Sym *)sechdrs[symindex].sh_addr + + ELF32_R_SYM(rel[i].r_info); + + /* this is the adjustment to be made */ + v = sym->st_value + rel[i].r_addend; + + switch (ELF32_R_TYPE(rel[i].r_info)) { + case R_C6000_ABS32: + pr_debug("RELA ABS32: [%p] = 0x%x\n", location, v); + *location = v; + break; + case R_C6000_ABS16: + pr_debug("RELA ABS16: [%p] = 0x%x\n", location, v); + *(u16 *)location = v; + break; + case R_C6000_ABS8: + pr_debug("RELA ABS8: [%p] = 0x%x\n", location, v); + *(u8 *)location = v; + break; + case R_C6000_ABS_L16: + opcode = *location; + opcode &= ~0x7fff80; + opcode |= ((v & 0xffff) << 7); + pr_debug("RELA ABS_L16[%p] v[0x%x] opcode[0x%x]\n", + location, v, opcode); + *location = opcode; + break; + case R_C6000_ABS_H16: + opcode = *location; + opcode &= ~0x7fff80; + opcode |= ((v >> 9) & 0x7fff80); + pr_debug("RELA ABS_H16[%p] v[0x%x] opcode[0x%x]\n", + location, v, opcode); + *location = opcode; + break; + case R_C6000_PCR_S21: + if (fixup_pcr(location, v, 21, 7)) + return -ENOEXEC; + break; + case R_C6000_PCR_S12: + if (fixup_pcr(location, v, 12, 16)) + return -ENOEXEC; + break; + case R_C6000_PCR_S10: + if (fixup_pcr(location, v, 10, 13)) + return -ENOEXEC; + break; + default: + pr_err("module %s: Unknown RELA relocation: %u\n", + me->name, ELF32_R_TYPE(rel[i].r_info)); + return -ENOEXEC; + } + } + + return 0; +} diff --git a/arch/c6x/kernel/process.c b/arch/c6x/kernel/process.c new file mode 100644 index 000000000000..7ca8c41b03cd --- /dev/null +++ b/arch/c6x/kernel/process.c @@ -0,0 +1,265 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2006, 2009, 2010, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/module.h> +#include <linux/unistd.h> +#include <linux/ptrace.h> +#include <linux/init_task.h> +#include <linux/tick.h> +#include <linux/mqueue.h> +#include <linux/syscalls.h> +#include <linux/reboot.h> + +#include <asm/syscalls.h> + +/* hooks for board specific support */ +void (*c6x_restart)(void); +void (*c6x_halt)(void); + +extern asmlinkage void ret_from_fork(void); + +static struct signal_struct init_signals = INIT_SIGNALS(init_signals); +static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); + +/* + * Initial thread structure. + */ +union thread_union init_thread_union __init_task_data = { + INIT_THREAD_INFO(init_task) +}; + +/* + * Initial task structure. + */ +struct task_struct init_task = INIT_TASK(init_task); +EXPORT_SYMBOL(init_task); + +/* + * power off function, if any + */ +void (*pm_power_off)(void); +EXPORT_SYMBOL(pm_power_off); + +static void c6x_idle(void) +{ + unsigned long tmp; + + /* + * Put local_irq_enable and idle in same execute packet + * to make them atomic and avoid race to idle with + * interrupts enabled. + */ + asm volatile (" mvc .s2 CSR,%0\n" + " or .d2 1,%0,%0\n" + " mvc .s2 %0,CSR\n" + "|| idle\n" + : "=b"(tmp)); +} + +/* + * The idle loop for C64x + */ +void cpu_idle(void) +{ + /* endless idle loop with no priority at all */ + while (1) { + tick_nohz_idle_enter(); + rcu_idle_enter(); + while (1) { + local_irq_disable(); + if (need_resched()) { + local_irq_enable(); + break; + } + c6x_idle(); /* enables local irqs */ + } + rcu_idle_exit(); + tick_nohz_idle_exit(); + + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } +} + +static void halt_loop(void) +{ + printk(KERN_EMERG "System Halted, OK to turn off power\n"); + local_irq_disable(); + while (1) + asm volatile("idle\n"); +} + +void machine_restart(char *__unused) +{ + if (c6x_restart) + c6x_restart(); + halt_loop(); +} + +void machine_halt(void) +{ + if (c6x_halt) + c6x_halt(); + halt_loop(); +} + +void machine_power_off(void) +{ + if (pm_power_off) + pm_power_off(); + halt_loop(); +} + +static void kernel_thread_helper(int dummy, void *arg, int (*fn)(void *)) +{ + do_exit(fn(arg)); +} + +/* + * Create a kernel thread + */ +int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) +{ + struct pt_regs regs; + + /* + * copy_thread sets a4 to zero (child return from fork) + * so we can't just set things up to directly return to + * fn. + */ + memset(®s, 0, sizeof(regs)); + regs.b4 = (unsigned long) arg; + regs.a6 = (unsigned long) fn; + regs.pc = (unsigned long) kernel_thread_helper; + local_save_flags(regs.csr); + regs.csr |= 1; + regs.tsr = 5; /* Set GEE and GIE in TSR */ + + /* Ok, create the new process.. */ + return do_fork(flags | CLONE_VM | CLONE_UNTRACED, -1, ®s, + 0, NULL, NULL); +} +EXPORT_SYMBOL(kernel_thread); + +void flush_thread(void) +{ +} + +void exit_thread(void) +{ +} + +SYSCALL_DEFINE1(c6x_clone, struct pt_regs *, regs) +{ + unsigned long clone_flags; + unsigned long newsp; + + /* syscall puts clone_flags in A4 and usp in B4 */ + clone_flags = regs->orig_a4; + if (regs->b4) + newsp = regs->b4; + else + newsp = regs->sp; + + return do_fork(clone_flags, newsp, regs, 0, (int __user *)regs->a6, + (int __user *)regs->b6); +} + +/* + * Do necessary setup to start up a newly executed thread. + */ +void start_thread(struct pt_regs *regs, unsigned int pc, unsigned long usp) +{ + /* + * The binfmt loader will setup a "full" stack, but the C6X + * operates an "empty" stack. So we adjust the usp so that + * argc doesn't get destroyed if an interrupt is taken before + * it is read from the stack. + * + * NB: Library startup code needs to match this. + */ + usp -= 8; + + set_fs(USER_DS); + regs->pc = pc; + regs->sp = usp; + regs->tsr |= 0x40; /* set user mode */ + current->thread.usp = usp; +} + +/* + * Copy a new thread context in its stack. + */ +int copy_thread(unsigned long clone_flags, unsigned long usp, + unsigned long ustk_size, + struct task_struct *p, struct pt_regs *regs) +{ + struct pt_regs *childregs; + + childregs = task_pt_regs(p); + + *childregs = *regs; + childregs->a4 = 0; + + if (usp == -1) + /* case of __kernel_thread: we return to supervisor space */ + childregs->sp = (unsigned long)(childregs + 1); + else + /* Otherwise use the given stack */ + childregs->sp = usp; + + /* Set usp/ksp */ + p->thread.usp = childregs->sp; + /* switch_to uses stack to save/restore 14 callee-saved regs */ + thread_saved_ksp(p) = (unsigned long)childregs - 8; + p->thread.pc = (unsigned int) ret_from_fork; + p->thread.wchan = (unsigned long) ret_from_fork; +#ifdef __DSBT__ + { + unsigned long dp; + + asm volatile ("mv .S2 b14,%0\n" : "=b"(dp)); + + thread_saved_dp(p) = dp; + if (usp == -1) + childregs->dp = dp; + } +#endif + return 0; +} + +/* + * c6x_execve() executes a new program. + */ +SYSCALL_DEFINE4(c6x_execve, const char __user *, name, + const char __user *const __user *, argv, + const char __user *const __user *, envp, + struct pt_regs *, regs) +{ + int error; + char *filename; + + filename = getname(name); + error = PTR_ERR(filename); + if (IS_ERR(filename)) + goto out; + + error = do_execve(filename, argv, envp, regs); + putname(filename); +out: + return error; +} + +unsigned long get_wchan(struct task_struct *p) +{ + return p->thread.wchan; +} diff --git a/arch/c6x/kernel/ptrace.c b/arch/c6x/kernel/ptrace.c new file mode 100644 index 000000000000..3c494e84444d --- /dev/null +++ b/arch/c6x/kernel/ptrace.c @@ -0,0 +1,187 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2006, 2009, 2010, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * Updated for 2.6.34: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/ptrace.h> +#include <linux/tracehook.h> +#include <linux/regset.h> +#include <linux/elf.h> + +#include <asm/cacheflush.h> + +#define PT_REG_SIZE (sizeof(struct pt_regs)) + +/* + * Called by kernel/ptrace.c when detaching. + */ +void ptrace_disable(struct task_struct *child) +{ + /* nothing to do */ +} + +/* + * Get a register number from live pt_regs for the specified task. + */ +static inline long get_reg(struct task_struct *task, int regno) +{ + long *addr = (long *)task_pt_regs(task); + + if (regno == PT_TSR || regno == PT_CSR) + return 0; + + return addr[regno]; +} + +/* + * Write contents of register REGNO in task TASK. + */ +static inline int put_reg(struct task_struct *task, + int regno, + unsigned long data) +{ + unsigned long *addr = (unsigned long *)task_pt_regs(task); + + if (regno != PT_TSR && regno != PT_CSR) + addr[regno] = data; + + return 0; +} + +/* regset get/set implementations */ + +static int gpr_get(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + void *kbuf, void __user *ubuf) +{ + struct pt_regs *regs = task_pt_regs(target); + + return user_regset_copyout(&pos, &count, &kbuf, &ubuf, + regs, + 0, sizeof(*regs)); +} + +static int gpr_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + int ret; + struct pt_regs *regs = task_pt_regs(target); + + /* Don't copyin TSR or CSR */ + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + ®s, + 0, PT_TSR * sizeof(long)); + if (ret) + return ret; + + ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, + PT_TSR * sizeof(long), + (PT_TSR + 1) * sizeof(long)); + if (ret) + return ret; + + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + ®s, + (PT_TSR + 1) * sizeof(long), + PT_CSR * sizeof(long)); + if (ret) + return ret; + + ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, + PT_CSR * sizeof(long), + (PT_CSR + 1) * sizeof(long)); + if (ret) + return ret; + + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + ®s, + (PT_CSR + 1) * sizeof(long), -1); + return ret; +} + +enum c6x_regset { + REGSET_GPR, +}; + +static const struct user_regset c6x_regsets[] = { + [REGSET_GPR] = { + .core_note_type = NT_PRSTATUS, + .n = ELF_NGREG, + .size = sizeof(u32), + .align = sizeof(u32), + .get = gpr_get, + .set = gpr_set + }, +}; + +static const struct user_regset_view user_c6x_native_view = { + .name = "tic6x", + .e_machine = EM_TI_C6000, + .regsets = c6x_regsets, + .n = ARRAY_SIZE(c6x_regsets), +}; + +const struct user_regset_view *task_user_regset_view(struct task_struct *task) +{ + return &user_c6x_native_view; +} + +/* + * Perform ptrace request + */ +long arch_ptrace(struct task_struct *child, long request, + unsigned long addr, unsigned long data) +{ + int ret = 0; + + switch (request) { + /* + * write the word at location addr. + */ + case PTRACE_POKETEXT: + ret = generic_ptrace_pokedata(child, addr, data); + if (ret == 0 && request == PTRACE_POKETEXT) + flush_icache_range(addr, addr + 4); + break; + default: + ret = ptrace_request(child, request, addr, data); + break; + } + + return ret; +} + +/* + * handle tracing of system call entry + * - return the revised system call number or ULONG_MAX to cause ENOSYS + */ +asmlinkage unsigned long syscall_trace_entry(struct pt_regs *regs) +{ + if (tracehook_report_syscall_entry(regs)) + /* tracing decided this syscall should not happen, so + * We'll return a bogus call number to get an ENOSYS + * error, but leave the original number in + * regs->orig_a4 + */ + return ULONG_MAX; + + return regs->b0; +} + +/* + * handle tracing of system call exit + */ +asmlinkage void syscall_trace_exit(struct pt_regs *regs) +{ + tracehook_report_syscall_exit(regs, 0); +} diff --git a/arch/c6x/kernel/setup.c b/arch/c6x/kernel/setup.c new file mode 100644 index 000000000000..0c07921747f4 --- /dev/null +++ b/arch/c6x/kernel/setup.c @@ -0,0 +1,510 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2006, 2009, 2010, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/dma-mapping.h> +#include <linux/memblock.h> +#include <linux/seq_file.h> +#include <linux/bootmem.h> +#include <linux/clkdev.h> +#include <linux/initrd.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_fdt.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/cache.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/fs.h> +#include <linux/of.h> + + +#include <asm/sections.h> +#include <asm/div64.h> +#include <asm/setup.h> +#include <asm/dscr.h> +#include <asm/clock.h> +#include <asm/soc.h> + +static const char *c6x_soc_name; + +int c6x_num_cores; +EXPORT_SYMBOL_GPL(c6x_num_cores); + +unsigned int c6x_silicon_rev; +EXPORT_SYMBOL_GPL(c6x_silicon_rev); + +/* + * Device status register. This holds information + * about device configuration needed by some drivers. + */ +unsigned int c6x_devstat; +EXPORT_SYMBOL_GPL(c6x_devstat); + +/* + * Some SoCs have fuse registers holding a unique MAC + * address. This is parsed out of the device tree with + * the resulting MAC being held here. + */ +unsigned char c6x_fuse_mac[6]; + +unsigned long memory_start; +unsigned long memory_end; + +unsigned long ram_start; +unsigned long ram_end; + +/* Uncached memory for DMA consistent use (memdma=) */ +static unsigned long dma_start __initdata; +static unsigned long dma_size __initdata; + +char c6x_command_line[COMMAND_LINE_SIZE]; + +#if defined(CONFIG_CMDLINE_BOOL) +static const char default_command_line[COMMAND_LINE_SIZE] __section(.cmdline) = + CONFIG_CMDLINE; +#endif + +struct cpuinfo_c6x { + const char *cpu_name; + const char *cpu_voltage; + const char *mmu; + const char *fpu; + char *cpu_rev; + unsigned int core_id; + char __cpu_rev[5]; +}; + +static DEFINE_PER_CPU(struct cpuinfo_c6x, cpu_data); + +unsigned int ticks_per_ns_scaled; +EXPORT_SYMBOL(ticks_per_ns_scaled); + +unsigned int c6x_core_freq; + +static void __init get_cpuinfo(void) +{ + unsigned cpu_id, rev_id, csr; + struct clk *coreclk = clk_get_sys(NULL, "core"); + unsigned long core_khz; + u64 tmp; + struct cpuinfo_c6x *p; + struct device_node *node, *np; + + p = &per_cpu(cpu_data, smp_processor_id()); + + if (!IS_ERR(coreclk)) + c6x_core_freq = clk_get_rate(coreclk); + else { + printk(KERN_WARNING + "Cannot find core clock frequency. Using 700MHz\n"); + c6x_core_freq = 700000000; + } + + core_khz = c6x_core_freq / 1000; + + tmp = (uint64_t)core_khz << C6X_NDELAY_SCALE; + do_div(tmp, 1000000); + ticks_per_ns_scaled = tmp; + + csr = get_creg(CSR); + cpu_id = csr >> 24; + rev_id = (csr >> 16) & 0xff; + + p->mmu = "none"; + p->fpu = "none"; + p->cpu_voltage = "unknown"; + + switch (cpu_id) { + case 0: + p->cpu_name = "C67x"; + p->fpu = "yes"; + break; + case 2: + p->cpu_name = "C62x"; + break; + case 8: + p->cpu_name = "C64x"; + break; + case 12: + p->cpu_name = "C64x"; + break; + case 16: + p->cpu_name = "C64x+"; + p->cpu_voltage = "1.2"; + break; + default: + p->cpu_name = "unknown"; + break; + } + + if (cpu_id < 16) { + switch (rev_id) { + case 0x1: + if (cpu_id > 8) { + p->cpu_rev = "DM640/DM641/DM642/DM643"; + p->cpu_voltage = "1.2 - 1.4"; + } else { + p->cpu_rev = "C6201"; + p->cpu_voltage = "2.5"; + } + break; + case 0x2: + p->cpu_rev = "C6201B/C6202/C6211"; + p->cpu_voltage = "1.8"; + break; + case 0x3: + p->cpu_rev = "C6202B/C6203/C6204/C6205"; + p->cpu_voltage = "1.5"; + break; + case 0x201: + p->cpu_rev = "C6701 revision 0 (early CPU)"; + p->cpu_voltage = "1.8"; + break; + case 0x202: + p->cpu_rev = "C6701/C6711/C6712"; + p->cpu_voltage = "1.8"; + break; + case 0x801: + p->cpu_rev = "C64x"; + p->cpu_voltage = "1.5"; + break; + default: + p->cpu_rev = "unknown"; + } + } else { + p->cpu_rev = p->__cpu_rev; + snprintf(p->__cpu_rev, sizeof(p->__cpu_rev), "0x%x", cpu_id); + } + + p->core_id = get_coreid(); + + node = of_find_node_by_name(NULL, "cpus"); + if (node) { + for_each_child_of_node(node, np) + if (!strcmp("cpu", np->name)) + ++c6x_num_cores; + of_node_put(node); + } + + node = of_find_node_by_name(NULL, "soc"); + if (node) { + if (of_property_read_string(node, "model", &c6x_soc_name)) + c6x_soc_name = "unknown"; + of_node_put(node); + } else + c6x_soc_name = "unknown"; + + printk(KERN_INFO "CPU%d: %s rev %s, %s volts, %uMHz\n", + p->core_id, p->cpu_name, p->cpu_rev, + p->cpu_voltage, c6x_core_freq / 1000000); +} + +/* + * Early parsing of the command line + */ +static u32 mem_size __initdata; + +/* "mem=" parsing. */ +static int __init early_mem(char *p) +{ + if (!p) + return -EINVAL; + + mem_size = memparse(p, &p); + /* don't remove all of memory when handling "mem={invalid}" */ + if (mem_size == 0) + return -EINVAL; + + return 0; +} +early_param("mem", early_mem); + +/* "memdma=<size>[@<address>]" parsing. */ +static int __init early_memdma(char *p) +{ + if (!p) + return -EINVAL; + + dma_size = memparse(p, &p); + if (*p == '@') + dma_start = memparse(p, &p); + + return 0; +} +early_param("memdma", early_memdma); + +int __init c6x_add_memory(phys_addr_t start, unsigned long size) +{ + static int ram_found __initdata; + + /* We only handle one bank (the one with PAGE_OFFSET) for now */ + if (ram_found) + return -EINVAL; + + if (start > PAGE_OFFSET || PAGE_OFFSET >= (start + size)) + return 0; + + ram_start = start; + ram_end = start + size; + + ram_found = 1; + return 0; +} + +/* + * Do early machine setup and device tree parsing. This is called very + * early on the boot process. + */ +notrace void __init machine_init(unsigned long dt_ptr) +{ + struct boot_param_header *dtb = __va(dt_ptr); + struct boot_param_header *fdt = (struct boot_param_header *)_fdt_start; + + /* interrupts must be masked */ + set_creg(IER, 2); + + /* + * Set the Interrupt Service Table (IST) to the beginning of the + * vector table. + */ + set_ist(_vectors_start); + + lockdep_init(); + + /* + * dtb is passed in from bootloader. + * fdt is linked in blob. + */ + if (dtb && dtb != fdt) + fdt = dtb; + + /* Do some early initialization based on the flat device tree */ + early_init_devtree(fdt); + + /* parse_early_param needs a boot_command_line */ + strlcpy(boot_command_line, c6x_command_line, COMMAND_LINE_SIZE); + parse_early_param(); +} + +void __init setup_arch(char **cmdline_p) +{ + int bootmap_size; + struct memblock_region *reg; + + printk(KERN_INFO "Initializing kernel\n"); + + /* Initialize command line */ + *cmdline_p = c6x_command_line; + + memory_end = ram_end; + memory_end &= ~(PAGE_SIZE - 1); + + if (mem_size && (PAGE_OFFSET + PAGE_ALIGN(mem_size)) < memory_end) + memory_end = PAGE_OFFSET + PAGE_ALIGN(mem_size); + + /* add block that this kernel can use */ + memblock_add(PAGE_OFFSET, memory_end - PAGE_OFFSET); + + /* reserve kernel text/data/bss */ + memblock_reserve(PAGE_OFFSET, + PAGE_ALIGN((unsigned long)&_end - PAGE_OFFSET)); + + if (dma_size) { + /* align to cacheability granularity */ + dma_size = CACHE_REGION_END(dma_size); + + if (!dma_start) + dma_start = memory_end - dma_size; + + /* align to cacheability granularity */ + dma_start = CACHE_REGION_START(dma_start); + + /* reserve DMA memory taken from kernel memory */ + if (memblock_is_region_memory(dma_start, dma_size)) + memblock_reserve(dma_start, dma_size); + } + + memory_start = PAGE_ALIGN((unsigned int) &_end); + + printk(KERN_INFO "Memory Start=%08lx, Memory End=%08lx\n", + memory_start, memory_end); + +#ifdef CONFIG_BLK_DEV_INITRD + /* + * Reserve initrd memory if in kernel memory. + */ + if (initrd_start < initrd_end) + if (memblock_is_region_memory(initrd_start, + initrd_end - initrd_start)) + memblock_reserve(initrd_start, + initrd_end - initrd_start); +#endif + + init_mm.start_code = (unsigned long) &_stext; + init_mm.end_code = (unsigned long) &_etext; + init_mm.end_data = memory_start; + init_mm.brk = memory_start; + + /* + * Give all the memory to the bootmap allocator, tell it to put the + * boot mem_map at the start of memory + */ + bootmap_size = init_bootmem_node(NODE_DATA(0), + memory_start >> PAGE_SHIFT, + PAGE_OFFSET >> PAGE_SHIFT, + memory_end >> PAGE_SHIFT); + memblock_reserve(memory_start, bootmap_size); + + unflatten_device_tree(); + + c6x_cache_init(); + + /* Set the whole external memory as non-cacheable */ + disable_caching(ram_start, ram_end - 1); + + /* Set caching of external RAM used by Linux */ + for_each_memblock(memory, reg) + enable_caching(CACHE_REGION_START(reg->base), + CACHE_REGION_START(reg->base + reg->size - 1)); + +#ifdef CONFIG_BLK_DEV_INITRD + /* + * Enable caching for initrd which falls outside kernel memory. + */ + if (initrd_start < initrd_end) { + if (!memblock_is_region_memory(initrd_start, + initrd_end - initrd_start)) + enable_caching(CACHE_REGION_START(initrd_start), + CACHE_REGION_START(initrd_end - 1)); + } +#endif + + /* + * Disable caching for dma coherent memory taken from kernel memory. + */ + if (dma_size && memblock_is_region_memory(dma_start, dma_size)) + disable_caching(dma_start, + CACHE_REGION_START(dma_start + dma_size - 1)); + + /* Initialize the coherent memory allocator */ + coherent_mem_init(dma_start, dma_size); + + /* + * Free all memory as a starting point. + */ + free_bootmem(PAGE_OFFSET, memory_end - PAGE_OFFSET); + + /* + * Then reserve memory which is already being used. + */ + for_each_memblock(reserved, reg) { + pr_debug("reserved - 0x%08x-0x%08x\n", + (u32) reg->base, (u32) reg->size); + reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT); + } + + max_low_pfn = PFN_DOWN(memory_end); + min_low_pfn = PFN_UP(memory_start); + max_mapnr = max_low_pfn - min_low_pfn; + + /* Get kmalloc into gear */ + paging_init(); + + /* + * Probe for Device State Configuration Registers. + * We have to do this early in case timer needs to be enabled + * through DSCR. + */ + dscr_probe(); + + /* We do this early for timer and core clock frequency */ + c64x_setup_clocks(); + + /* Get CPU info */ + get_cpuinfo(); + +#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE) + conswitchp = &dummy_con; +#endif +} + +#define cpu_to_ptr(n) ((void *)((long)(n)+1)) +#define ptr_to_cpu(p) ((long)(p) - 1) + +static int show_cpuinfo(struct seq_file *m, void *v) +{ + int n = ptr_to_cpu(v); + struct cpuinfo_c6x *p = &per_cpu(cpu_data, n); + + if (n == 0) { + seq_printf(m, + "soc\t\t: %s\n" + "soc revision\t: 0x%x\n" + "soc cores\t: %d\n", + c6x_soc_name, c6x_silicon_rev, c6x_num_cores); + } + + seq_printf(m, + "\n" + "processor\t: %d\n" + "cpu\t\t: %s\n" + "core revision\t: %s\n" + "core voltage\t: %s\n" + "core id\t\t: %d\n" + "mmu\t\t: %s\n" + "fpu\t\t: %s\n" + "cpu MHz\t\t: %u\n" + "bogomips\t: %lu.%02lu\n\n", + n, + p->cpu_name, p->cpu_rev, p->cpu_voltage, + p->core_id, p->mmu, p->fpu, + (c6x_core_freq + 500000) / 1000000, + (loops_per_jiffy/(500000/HZ)), + (loops_per_jiffy/(5000/HZ))%100); + + return 0; +} + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + return *pos < nr_cpu_ids ? cpu_to_ptr(*pos) : NULL; +} +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return NULL; +} +static void c_stop(struct seq_file *m, void *v) +{ +} + +const struct seq_operations cpuinfo_op = { + c_start, + c_stop, + c_next, + show_cpuinfo +}; + +static struct cpu cpu_devices[NR_CPUS]; + +static int __init topology_init(void) +{ + int i; + + for_each_present_cpu(i) + register_cpu(&cpu_devices[i], i); + + return 0; +} + +subsys_initcall(topology_init); diff --git a/arch/c6x/kernel/signal.c b/arch/c6x/kernel/signal.c new file mode 100644 index 000000000000..304f675826e9 --- /dev/null +++ b/arch/c6x/kernel/signal.c @@ -0,0 +1,377 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2006, 2009, 2010, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * Updated for 2.6.34: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/uaccess.h> +#include <linux/syscalls.h> +#include <linux/tracehook.h> + +#include <asm/ucontext.h> +#include <asm/cacheflush.h> + + +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + +/* + * Do a signal return, undo the signal stack. + */ + +#define RETCODE_SIZE (9 << 2) /* 9 instructions = 36 bytes */ + +struct rt_sigframe { + struct siginfo __user *pinfo; + void __user *puc; + struct siginfo info; + struct ucontext uc; + unsigned long retcode[RETCODE_SIZE >> 2]; +}; + +static int restore_sigcontext(struct pt_regs *regs, + struct sigcontext __user *sc) +{ + int err = 0; + + /* The access_ok check was done by caller, so use __get_user here */ +#define COPY(x) (err |= __get_user(regs->x, &sc->sc_##x)) + + COPY(sp); COPY(a4); COPY(b4); COPY(a6); COPY(b6); COPY(a8); COPY(b8); + COPY(a0); COPY(a1); COPY(a2); COPY(a3); COPY(a5); COPY(a7); COPY(a9); + COPY(b0); COPY(b1); COPY(b2); COPY(b3); COPY(b5); COPY(b7); COPY(b9); + + COPY(a16); COPY(a17); COPY(a18); COPY(a19); + COPY(a20); COPY(a21); COPY(a22); COPY(a23); + COPY(a24); COPY(a25); COPY(a26); COPY(a27); + COPY(a28); COPY(a29); COPY(a30); COPY(a31); + COPY(b16); COPY(b17); COPY(b18); COPY(b19); + COPY(b20); COPY(b21); COPY(b22); COPY(b23); + COPY(b24); COPY(b25); COPY(b26); COPY(b27); + COPY(b28); COPY(b29); COPY(b30); COPY(b31); + + COPY(csr); COPY(pc); + +#undef COPY + + return err; +} + +asmlinkage int do_rt_sigreturn(struct pt_regs *regs) +{ + struct rt_sigframe __user *frame; + sigset_t set; + + /* + * Since we stacked the signal on a dword boundary, + * 'sp' should be dword aligned here. If it's + * not, then the user is trying to mess with us. + */ + if (regs->sp & 7) + goto badframe; + + frame = (struct rt_sigframe __user *) ((unsigned long) regs->sp + 8); + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) + goto badframe; + + return regs->a4; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +static int setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, + unsigned long mask) +{ + int err = 0; + + err |= __put_user(mask, &sc->sc_mask); + + /* The access_ok check was done by caller, so use __put_user here */ +#define COPY(x) (err |= __put_user(regs->x, &sc->sc_##x)) + + COPY(sp); COPY(a4); COPY(b4); COPY(a6); COPY(b6); COPY(a8); COPY(b8); + COPY(a0); COPY(a1); COPY(a2); COPY(a3); COPY(a5); COPY(a7); COPY(a9); + COPY(b0); COPY(b1); COPY(b2); COPY(b3); COPY(b5); COPY(b7); COPY(b9); + + COPY(a16); COPY(a17); COPY(a18); COPY(a19); + COPY(a20); COPY(a21); COPY(a22); COPY(a23); + COPY(a24); COPY(a25); COPY(a26); COPY(a27); + COPY(a28); COPY(a29); COPY(a30); COPY(a31); + COPY(b16); COPY(b17); COPY(b18); COPY(b19); + COPY(b20); COPY(b21); COPY(b22); COPY(b23); + COPY(b24); COPY(b25); COPY(b26); COPY(b27); + COPY(b28); COPY(b29); COPY(b30); COPY(b31); + + COPY(csr); COPY(pc); + +#undef COPY + + return err; +} + +static inline void __user *get_sigframe(struct k_sigaction *ka, + struct pt_regs *regs, + unsigned long framesize) +{ + unsigned long sp = regs->sp; + + /* + * This is the X/Open sanctioned signal stack switching. + */ + if ((ka->sa.sa_flags & SA_ONSTACK) && sas_ss_flags(sp) == 0) + sp = current->sas_ss_sp + current->sas_ss_size; + + /* + * No matter what happens, 'sp' must be dword + * aligned. Otherwise, nasty things will happen + */ + return (void __user *)((sp - framesize) & ~7); +} + +static int setup_rt_frame(int signr, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs) +{ + struct rt_sigframe __user *frame; + unsigned long __user *retcode; + int err = 0; + + frame = get_sigframe(ka, regs, sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto segv_and_exit; + + err |= __put_user(&frame->info, &frame->pinfo); + err |= __put_user(&frame->uc, &frame->puc); + err |= copy_siginfo_to_user(&frame->info, info); + + /* Clear all the bits of the ucontext we don't use. */ + err |= __clear_user(&frame->uc, offsetof(struct ucontext, uc_mcontext)); + + err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]); + err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + + /* Set up to return from userspace */ + retcode = (unsigned long __user *) &frame->retcode; + + /* The access_ok check was done above, so use __put_user here */ +#define COPY(x) (err |= __put_user(x, retcode++)) + + COPY(0x0000002AUL | (__NR_rt_sigreturn << 7)); + /* MVK __NR_rt_sigreturn,B0 */ + COPY(0x10000000UL); /* SWE */ + COPY(0x00006000UL); /* NOP 4 */ + COPY(0x00006000UL); /* NOP 4 */ + COPY(0x00006000UL); /* NOP 4 */ + COPY(0x00006000UL); /* NOP 4 */ + COPY(0x00006000UL); /* NOP 4 */ + COPY(0x00006000UL); /* NOP 4 */ + COPY(0x00006000UL); /* NOP 4 */ + +#undef COPY + + if (err) + goto segv_and_exit; + + flush_icache_range((unsigned long) &frame->retcode, + (unsigned long) &frame->retcode + RETCODE_SIZE); + + retcode = (unsigned long __user *) &frame->retcode; + + /* Change user context to branch to signal handler */ + regs->sp = (unsigned long) frame - 8; + regs->b3 = (unsigned long) retcode; + regs->pc = (unsigned long) ka->sa.sa_handler; + + /* Give the signal number to the handler */ + regs->a4 = signr; + + /* + * For realtime signals we must also set the second and third + * arguments for the signal handler. + * -- Peter Maydell <pmaydell@chiark.greenend.org.uk> 2000-12-06 + */ + regs->b4 = (unsigned long)&frame->info; + regs->a6 = (unsigned long)&frame->uc; + + return 0; + +segv_and_exit: + force_sigsegv(signr, current); + return -EFAULT; +} + +static inline void +handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler) +{ + switch (regs->a4) { + case -ERESTARTNOHAND: + if (!has_handler) + goto do_restart; + regs->a4 = -EINTR; + break; + + case -ERESTARTSYS: + if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) { + regs->a4 = -EINTR; + break; + } + /* fallthrough */ + case -ERESTARTNOINTR: +do_restart: + regs->a4 = regs->orig_a4; + regs->pc -= 4; + break; + } +} + +/* + * handle the actual delivery of a signal to userspace + */ +static int handle_signal(int sig, + siginfo_t *info, struct k_sigaction *ka, + sigset_t *oldset, struct pt_regs *regs, + int syscall) +{ + int ret; + + /* Are we from a system call? */ + if (syscall) { + /* If so, check system call restarting.. */ + switch (regs->a4) { + case -ERESTART_RESTARTBLOCK: + case -ERESTARTNOHAND: + regs->a4 = -EINTR; + break; + + case -ERESTARTSYS: + if (!(ka->sa.sa_flags & SA_RESTART)) { + regs->a4 = -EINTR; + break; + } + + /* fallthrough */ + case -ERESTARTNOINTR: + regs->a4 = regs->orig_a4; + regs->pc -= 4; + } + } + + /* Set up the stack frame */ + ret = setup_rt_frame(sig, ka, info, oldset, regs); + if (ret == 0) { + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked, ¤t->blocked, + &ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked, sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + } + + return ret; +} + +/* + * handle a potential signal + */ +static void do_signal(struct pt_regs *regs, int syscall) +{ + struct k_sigaction ka; + siginfo_t info; + sigset_t *oldset; + int signr; + + /* we want the common case to go fast, which is why we may in certain + * cases get here from kernel mode */ + if (!user_mode(regs)) + return; + + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + oldset = ¤t->saved_sigmask; + else + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, NULL); + if (signr > 0) { + if (handle_signal(signr, &info, &ka, oldset, + regs, syscall) == 0) { + /* a signal was successfully delivered; the saved + * sigmask will have been stored in the signal frame, + * and will be restored by sigreturn, so we can simply + * clear the TIF_RESTORE_SIGMASK flag */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + clear_thread_flag(TIF_RESTORE_SIGMASK); + + tracehook_signal_handler(signr, &info, &ka, regs, 0); + } + + return; + } + + /* did we come from a system call? */ + if (syscall) { + /* restart the system call - no handlers present */ + switch (regs->a4) { + case -ERESTARTNOHAND: + case -ERESTARTSYS: + case -ERESTARTNOINTR: + regs->a4 = regs->orig_a4; + regs->pc -= 4; + break; + + case -ERESTART_RESTARTBLOCK: + regs->a4 = regs->orig_a4; + regs->b0 = __NR_restart_syscall; + regs->pc -= 4; + break; + } + } + + /* if there's no signal to deliver, we just put the saved sigmask + * back */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) { + clear_thread_flag(TIF_RESTORE_SIGMASK); + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } +} + +/* + * notification of userspace execution resumption + * - triggered by current->work.notify_resume + */ +asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags, + int syscall) +{ + /* deal with pending signal delivery */ + if (thread_info_flags & ((1 << TIF_SIGPENDING) | + (1 << TIF_RESTORE_SIGMASK))) + do_signal(regs, syscall); + + if (thread_info_flags & (1 << TIF_NOTIFY_RESUME)) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); + } +} diff --git a/arch/c6x/kernel/soc.c b/arch/c6x/kernel/soc.c new file mode 100644 index 000000000000..dd45bc39af0e --- /dev/null +++ b/arch/c6x/kernel/soc.c @@ -0,0 +1,91 @@ +/* + * Miscellaneous SoC-specific hooks. + * + * Copyright (C) 2011 Texas Instruments Incorporated + * Author: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/ctype.h> +#include <linux/etherdevice.h> +#include <asm/system.h> +#include <asm/setup.h> +#include <asm/soc.h> + +struct soc_ops soc_ops; + +int soc_get_exception(void) +{ + if (!soc_ops.get_exception) + return -1; + return soc_ops.get_exception(); +} + +void soc_assert_event(unsigned int evt) +{ + if (soc_ops.assert_event) + soc_ops.assert_event(evt); +} + +static u8 cmdline_mac[6]; + +static int __init get_mac_addr_from_cmdline(char *str) +{ + int count, i, val; + + for (count = 0; count < 6 && *str; count++, str += 3) { + if (!isxdigit(str[0]) || !isxdigit(str[1])) + return 0; + if (str[2] != ((count < 5) ? ':' : '\0')) + return 0; + + for (i = 0, val = 0; i < 2; i++) { + val = val << 4; + val |= isdigit(str[i]) ? + str[i] - '0' : toupper(str[i]) - 'A' + 10; + } + cmdline_mac[count] = val; + } + return 1; +} +__setup("emac_addr=", get_mac_addr_from_cmdline); + +/* + * Setup the MAC address for SoC ethernet devices. + * + * Before calling this function, the ethernet driver will have + * initialized the addr with local-mac-address from the device + * tree (if found). Allow command line to override, but not + * the fused address. + */ +int soc_mac_addr(unsigned int index, u8 *addr) +{ + int i, have_dt_mac = 0, have_cmdline_mac = 0, have_fuse_mac = 0; + + for (i = 0; i < 6; i++) { + if (cmdline_mac[i]) + have_cmdline_mac = 1; + if (c6x_fuse_mac[i]) + have_fuse_mac = 1; + if (addr[i]) + have_dt_mac = 1; + } + + /* cmdline overrides all */ + if (have_cmdline_mac) + memcpy(addr, cmdline_mac, 6); + else if (!have_dt_mac) { + if (have_fuse_mac) + memcpy(addr, c6x_fuse_mac, 6); + else + random_ether_addr(addr); + } + + /* adjust for specific EMAC device */ + addr[5] += index * c6x_num_cores; + return 1; +} +EXPORT_SYMBOL_GPL(soc_mac_addr); diff --git a/arch/c6x/kernel/switch_to.S b/arch/c6x/kernel/switch_to.S new file mode 100644 index 000000000000..09177ed0fa5c --- /dev/null +++ b/arch/c6x/kernel/switch_to.S @@ -0,0 +1,74 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated + * Author: Mark Salter (msalter@redhat.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/asm-offsets.h> + +#define SP B15 + + /* + * void __switch_to(struct thread_info *prev, + * struct thread_info *next, + * struct task_struct *tsk) ; + */ +ENTRY(__switch_to) + LDDW .D2T2 *+B4(THREAD_B15_14),B7:B6 + || MV .L2X A4,B5 ; prev + || MV .L1X B4,A5 ; next + || MVC .S2 RILC,B1 + + STW .D2T2 B3,*+B5(THREAD_PC) + || STDW .D1T1 A13:A12,*+A4(THREAD_A13_12) + || MVC .S2 ILC,B0 + + LDW .D2T2 *+B4(THREAD_PC),B3 + || LDDW .D1T1 *+A5(THREAD_A13_12),A13:A12 + + STDW .D1T1 A11:A10,*+A4(THREAD_A11_10) + || STDW .D2T2 B1:B0,*+B5(THREAD_RICL_ICL) +#ifndef __DSBT__ + || MVKL .S2 current_ksp,B1 +#endif + + STDW .D2T2 B15:B14,*+B5(THREAD_B15_14) + || STDW .D1T1 A15:A14,*+A4(THREAD_A15_14) +#ifndef __DSBT__ + || MVKH .S2 current_ksp,B1 +#endif + + ;; Switch to next SP + MV .S2 B7,SP +#ifdef __DSBT__ + || STW .D2T2 B7,*+B14(current_ksp) +#else + || STW .D2T2 B7,*B1 + || MV .L2 B6,B14 +#endif + || LDDW .D1T1 *+A5(THREAD_RICL_ICL),A1:A0 + + STDW .D2T2 B11:B10,*+B5(THREAD_B11_10) + || LDDW .D1T1 *+A5(THREAD_A15_14),A15:A14 + + STDW .D2T2 B13:B12,*+B5(THREAD_B13_12) + || LDDW .D1T1 *+A5(THREAD_A11_10),A11:A10 + + B .S2 B3 ; return in next E1 + || LDDW .D2T2 *+B4(THREAD_B13_12),B13:B12 + + LDDW .D2T2 *+B4(THREAD_B11_10),B11:B10 + NOP + + MV .L2X A0,B0 + || MV .S1 A6,A4 + + MVC .S2 B0,ILC + || MV .L2X A1,B1 + + MVC .S2 B1,RILC +ENDPROC(__switch_to) diff --git a/arch/c6x/kernel/sys_c6x.c b/arch/c6x/kernel/sys_c6x.c new file mode 100644 index 000000000000..3e9bdfbee8ad --- /dev/null +++ b/arch/c6x/kernel/sys_c6x.c @@ -0,0 +1,74 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/syscalls.h> +#include <linux/uaccess.h> + +#include <asm/syscalls.h> + +#ifdef CONFIG_ACCESS_CHECK +int _access_ok(unsigned long addr, unsigned long size) +{ + if (!size) + return 1; + + if (!addr || addr > (0xffffffffUL - (size - 1))) + goto _bad_access; + + if (segment_eq(get_fs(), KERNEL_DS)) + return 1; + + if (memory_start <= addr && (addr + size - 1) < memory_end) + return 1; + +_bad_access: + pr_debug("Bad access attempt: pid[%d] addr[%08lx] size[0x%lx]\n", + current->pid, addr, size); + return 0; +} +EXPORT_SYMBOL(_access_ok); +#endif + +/* sys_cache_sync -- sync caches over given range */ +asmlinkage int sys_cache_sync(unsigned long s, unsigned long e) +{ + L1D_cache_block_writeback_invalidate(s, e); + L1P_cache_block_invalidate(s, e); + + return 0; +} + +/* Provide the actual syscall number to call mapping. */ +#undef __SYSCALL +#define __SYSCALL(nr, call) [nr] = (call), + +/* + * Use trampolines + */ +#define sys_pread64 sys_pread_c6x +#define sys_pwrite64 sys_pwrite_c6x +#define sys_truncate64 sys_truncate64_c6x +#define sys_ftruncate64 sys_ftruncate64_c6x +#define sys_fadvise64 sys_fadvise64_c6x +#define sys_fadvise64_64 sys_fadvise64_64_c6x +#define sys_fallocate sys_fallocate_c6x + +/* Use sys_mmap_pgoff directly */ +#define sys_mmap2 sys_mmap_pgoff + +/* + * Note that we can't include <linux/unistd.h> here since the header + * guard will defeat us; <asm/unistd.h> checks for __SYSCALL as well. + */ +void *sys_call_table[__NR_syscalls] = { + [0 ... __NR_syscalls-1] = sys_ni_syscall, +#include <asm/unistd.h> +}; diff --git a/arch/c6x/kernel/time.c b/arch/c6x/kernel/time.c new file mode 100644 index 000000000000..4c9f136165f7 --- /dev/null +++ b/arch/c6x/kernel/time.c @@ -0,0 +1,65 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/clocksource.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/timex.h> +#include <linux/profile.h> + +#include <asm/timer64.h> + +static u32 sched_clock_multiplier; +#define SCHED_CLOCK_SHIFT 16 + +static cycle_t tsc_read(struct clocksource *cs) +{ + return get_cycles(); +} + +static struct clocksource clocksource_tsc = { + .name = "timestamp", + .rating = 300, + .read = tsc_read, + .mask = CLOCKSOURCE_MASK(64), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +/* + * scheduler clock - returns current time in nanoseconds. + */ +u64 sched_clock(void) +{ + u64 tsc = get_cycles(); + + return (tsc * sched_clock_multiplier) >> SCHED_CLOCK_SHIFT; +} + +void time_init(void) +{ + u64 tmp = (u64)NSEC_PER_SEC << SCHED_CLOCK_SHIFT; + + do_div(tmp, c6x_core_freq); + sched_clock_multiplier = tmp; + + clocksource_register_hz(&clocksource_tsc, c6x_core_freq); + + /* write anything into TSCL to enable counting */ + set_creg(TSCL, 0); + + /* probe for timer64 event timer */ + timer64_init(); +} diff --git a/arch/c6x/kernel/traps.c b/arch/c6x/kernel/traps.c new file mode 100644 index 000000000000..f50e3edd6dad --- /dev/null +++ b/arch/c6x/kernel/traps.c @@ -0,0 +1,423 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2006, 2009, 2010, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/ptrace.h> +#include <linux/kallsyms.h> +#include <linux/bug.h> + +#include <asm/soc.h> +#include <asm/traps.h> + +int (*c6x_nmi_handler)(struct pt_regs *regs); + +void __init trap_init(void) +{ + ack_exception(EXCEPT_TYPE_NXF); + ack_exception(EXCEPT_TYPE_EXC); + ack_exception(EXCEPT_TYPE_IXF); + ack_exception(EXCEPT_TYPE_SXF); + enable_exception(); +} + +void show_regs(struct pt_regs *regs) +{ + pr_err("\n"); + pr_err("PC: %08lx SP: %08lx\n", regs->pc, regs->sp); + pr_err("Status: %08lx ORIG_A4: %08lx\n", regs->csr, regs->orig_a4); + pr_err("A0: %08lx B0: %08lx\n", regs->a0, regs->b0); + pr_err("A1: %08lx B1: %08lx\n", regs->a1, regs->b1); + pr_err("A2: %08lx B2: %08lx\n", regs->a2, regs->b2); + pr_err("A3: %08lx B3: %08lx\n", regs->a3, regs->b3); + pr_err("A4: %08lx B4: %08lx\n", regs->a4, regs->b4); + pr_err("A5: %08lx B5: %08lx\n", regs->a5, regs->b5); + pr_err("A6: %08lx B6: %08lx\n", regs->a6, regs->b6); + pr_err("A7: %08lx B7: %08lx\n", regs->a7, regs->b7); + pr_err("A8: %08lx B8: %08lx\n", regs->a8, regs->b8); + pr_err("A9: %08lx B9: %08lx\n", regs->a9, regs->b9); + pr_err("A10: %08lx B10: %08lx\n", regs->a10, regs->b10); + pr_err("A11: %08lx B11: %08lx\n", regs->a11, regs->b11); + pr_err("A12: %08lx B12: %08lx\n", regs->a12, regs->b12); + pr_err("A13: %08lx B13: %08lx\n", regs->a13, regs->b13); + pr_err("A14: %08lx B14: %08lx\n", regs->a14, regs->dp); + pr_err("A15: %08lx B15: %08lx\n", regs->a15, regs->sp); + pr_err("A16: %08lx B16: %08lx\n", regs->a16, regs->b16); + pr_err("A17: %08lx B17: %08lx\n", regs->a17, regs->b17); + pr_err("A18: %08lx B18: %08lx\n", regs->a18, regs->b18); + pr_err("A19: %08lx B19: %08lx\n", regs->a19, regs->b19); + pr_err("A20: %08lx B20: %08lx\n", regs->a20, regs->b20); + pr_err("A21: %08lx B21: %08lx\n", regs->a21, regs->b21); + pr_err("A22: %08lx B22: %08lx\n", regs->a22, regs->b22); + pr_err("A23: %08lx B23: %08lx\n", regs->a23, regs->b23); + pr_err("A24: %08lx B24: %08lx\n", regs->a24, regs->b24); + pr_err("A25: %08lx B25: %08lx\n", regs->a25, regs->b25); + pr_err("A26: %08lx B26: %08lx\n", regs->a26, regs->b26); + pr_err("A27: %08lx B27: %08lx\n", regs->a27, regs->b27); + pr_err("A28: %08lx B28: %08lx\n", regs->a28, regs->b28); + pr_err("A29: %08lx B29: %08lx\n", regs->a29, regs->b29); + pr_err("A30: %08lx B30: %08lx\n", regs->a30, regs->b30); + pr_err("A31: %08lx B31: %08lx\n", regs->a31, regs->b31); +} + +void dump_stack(void) +{ + unsigned long stack; + + show_stack(current, &stack); +} +EXPORT_SYMBOL(dump_stack); + + +void die(char *str, struct pt_regs *fp, int nr) +{ + console_verbose(); + pr_err("%s: %08x\n", str, nr); + show_regs(fp); + + pr_err("Process %s (pid: %d, stackpage=%08lx)\n", + current->comm, current->pid, (PAGE_SIZE + + (unsigned long) current)); + + dump_stack(); + while (1) + ; +} + +static void die_if_kernel(char *str, struct pt_regs *fp, int nr) +{ + if (user_mode(fp)) + return; + + die(str, fp, nr); +} + + +/* Internal exceptions */ +static struct exception_info iexcept_table[10] = { + { "Oops - instruction fetch", SIGBUS, BUS_ADRERR }, + { "Oops - fetch packet", SIGBUS, BUS_ADRERR }, + { "Oops - execute packet", SIGILL, ILL_ILLOPC }, + { "Oops - undefined instruction", SIGILL, ILL_ILLOPC }, + { "Oops - resource conflict", SIGILL, ILL_ILLOPC }, + { "Oops - resource access", SIGILL, ILL_PRVREG }, + { "Oops - privilege", SIGILL, ILL_PRVOPC }, + { "Oops - loops buffer", SIGILL, ILL_ILLOPC }, + { "Oops - software exception", SIGILL, ILL_ILLTRP }, + { "Oops - unknown exception", SIGILL, ILL_ILLOPC } +}; + +/* External exceptions */ +static struct exception_info eexcept_table[128] = { + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - external exception", SIGBUS, BUS_ADRERR }, + { "Oops - CPU memory protection fault", SIGSEGV, SEGV_ACCERR }, + { "Oops - CPU memory protection fault in L1P", SIGSEGV, SEGV_ACCERR }, + { "Oops - DMA memory protection fault in L1P", SIGSEGV, SEGV_ACCERR }, + { "Oops - CPU memory protection fault in L1D", SIGSEGV, SEGV_ACCERR }, + { "Oops - DMA memory protection fault in L1D", SIGSEGV, SEGV_ACCERR }, + { "Oops - CPU memory protection fault in L2", SIGSEGV, SEGV_ACCERR }, + { "Oops - DMA memory protection fault in L2", SIGSEGV, SEGV_ACCERR }, + { "Oops - EMC CPU memory protection fault", SIGSEGV, SEGV_ACCERR }, + { "Oops - EMC bus error", SIGBUS, BUS_ADRERR } +}; + +static void do_trap(struct exception_info *except_info, struct pt_regs *regs) +{ + unsigned long addr = instruction_pointer(regs); + siginfo_t info; + + if (except_info->code != TRAP_BRKPT) + pr_err("TRAP: %s PC[0x%lx] signo[%d] code[%d]\n", + except_info->kernel_str, regs->pc, + except_info->signo, except_info->code); + + die_if_kernel(except_info->kernel_str, regs, addr); + + info.si_signo = except_info->signo; + info.si_errno = 0; + info.si_code = except_info->code; + info.si_addr = (void __user *)addr; + + force_sig_info(except_info->signo, &info, current); +} + +/* + * Process an internal exception (non maskable) + */ +static int process_iexcept(struct pt_regs *regs) +{ + unsigned int iexcept_report = get_iexcept(); + unsigned int iexcept_num; + + ack_exception(EXCEPT_TYPE_IXF); + + pr_err("IEXCEPT: PC[0x%lx]\n", regs->pc); + + while (iexcept_report) { + iexcept_num = __ffs(iexcept_report); + iexcept_report &= ~(1 << iexcept_num); + set_iexcept(iexcept_report); + if (*(unsigned int *)regs->pc == BKPT_OPCODE) { + /* This is a breakpoint */ + struct exception_info bkpt_exception = { + "Oops - undefined instruction", + SIGTRAP, TRAP_BRKPT + }; + do_trap(&bkpt_exception, regs); + iexcept_report &= ~(0xFF); + set_iexcept(iexcept_report); + continue; + } + + do_trap(&iexcept_table[iexcept_num], regs); + } + return 0; +} + +/* + * Process an external exception (maskable) + */ +static void process_eexcept(struct pt_regs *regs) +{ + int evt; + + pr_err("EEXCEPT: PC[0x%lx]\n", regs->pc); + + while ((evt = soc_get_exception()) >= 0) + do_trap(&eexcept_table[evt], regs); + + ack_exception(EXCEPT_TYPE_EXC); +} + +/* + * Main exception processing + */ +asmlinkage int process_exception(struct pt_regs *regs) +{ + unsigned int type; + unsigned int type_num; + unsigned int ie_num = 9; /* default is unknown exception */ + + while ((type = get_except_type()) != 0) { + type_num = fls(type) - 1; + + switch (type_num) { + case EXCEPT_TYPE_NXF: + ack_exception(EXCEPT_TYPE_NXF); + if (c6x_nmi_handler) + (c6x_nmi_handler)(regs); + else + pr_alert("NMI interrupt!\n"); + break; + + case EXCEPT_TYPE_IXF: + if (process_iexcept(regs)) + return 1; + break; + + case EXCEPT_TYPE_EXC: + process_eexcept(regs); + break; + + case EXCEPT_TYPE_SXF: + ie_num = 8; + default: + ack_exception(type_num); + do_trap(&iexcept_table[ie_num], regs); + break; + } + } + return 0; +} + +static int kstack_depth_to_print = 48; + +static void show_trace(unsigned long *stack, unsigned long *endstack) +{ + unsigned long addr; + int i; + + pr_debug("Call trace:"); + i = 0; + while (stack + 1 <= endstack) { + addr = *stack++; + /* + * If the address is either in the text segment of the + * kernel, or in the region which contains vmalloc'ed + * memory, it *may* be the address of a calling + * routine; if so, print it so that someone tracing + * down the cause of the crash will be able to figure + * out the call path that was taken. + */ + if (__kernel_text_address(addr)) { +#ifndef CONFIG_KALLSYMS + if (i % 5 == 0) + pr_debug("\n "); +#endif + pr_debug(" [<%08lx>]", addr); + print_symbol(" %s\n", addr); + i++; + } + } + pr_debug("\n"); +} + +void show_stack(struct task_struct *task, unsigned long *stack) +{ + unsigned long *p, *endstack; + int i; + + if (!stack) { + if (task && task != current) + /* We know this is a kernel stack, + so this is the start/end */ + stack = (unsigned long *)thread_saved_ksp(task); + else + stack = (unsigned long *)&stack; + } + endstack = (unsigned long *)(((unsigned long)stack + THREAD_SIZE - 1) + & -THREAD_SIZE); + + pr_debug("Stack from %08lx:", (unsigned long)stack); + for (i = 0, p = stack; i < kstack_depth_to_print; i++) { + if (p + 1 > endstack) + break; + if (i % 8 == 0) + pr_cont("\n "); + pr_cont(" %08lx", *p++); + } + pr_cont("\n"); + show_trace(stack, endstack); +} + +int is_valid_bugaddr(unsigned long addr) +{ + return __kernel_text_address(addr); +} diff --git a/arch/c6x/kernel/vectors.S b/arch/c6x/kernel/vectors.S new file mode 100644 index 000000000000..c95c66fc71e8 --- /dev/null +++ b/arch/c6x/kernel/vectors.S @@ -0,0 +1,81 @@ +; +; Port on Texas Instruments TMS320C6x architecture +; +; Copyright (C) 2004, 2006, 2009, 2010, 2011 Texas Instruments Incorporated +; Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) +; +; This program is free software; you can redistribute it and/or modify +; it under the terms of the GNU General Public License version 2 as +; published by the Free Software Foundation. +; +; This section handles all the interrupt vector routines. +; At RESET the processor sets up the DRAM timing parameters and +; branches to the label _c_int00 which handles initialization for the C code. +; + +#define ALIGNMENT 5 + + .macro IRQVEC name, handler + .align ALIGNMENT + .hidden \name + .global \name +\name: +#ifdef CONFIG_C6X_BIG_KERNEL + STW .D2T1 A0,*B15--[2] + || MVKL .S1 \handler,A0 + MVKH .S1 \handler,A0 + B .S2X A0 + LDW .D2T1 *++B15[2],A0 + NOP 4 + NOP + NOP + .endm +#else /* CONFIG_C6X_BIG_KERNEL */ + B .S2 \handler + NOP + NOP + NOP + NOP + NOP + NOP + NOP + .endm +#endif /* CONFIG_C6X_BIG_KERNEL */ + + .sect ".vectors","ax" + .align ALIGNMENT + .global RESET + .hidden RESET +RESET: +#ifdef CONFIG_C6X_BIG_KERNEL + MVKL .S1 _c_int00,A0 ; branch to _c_int00 + MVKH .S1 _c_int00,A0 + B .S2X A0 +#else + B .S2 _c_int00 + NOP + NOP +#endif + NOP + NOP + NOP + NOP + NOP + + + IRQVEC NMI,_nmi_handler ; NMI interrupt + IRQVEC AINT,_bad_interrupt ; reserved + IRQVEC MSGINT,_bad_interrupt ; reserved + + IRQVEC INT4,_int4_handler + IRQVEC INT5,_int5_handler + IRQVEC INT6,_int6_handler + IRQVEC INT7,_int7_handler + IRQVEC INT8,_int8_handler + IRQVEC INT9,_int9_handler + IRQVEC INT10,_int10_handler + IRQVEC INT11,_int11_handler + IRQVEC INT12,_int12_handler + IRQVEC INT13,_int13_handler + IRQVEC INT14,_int14_handler + IRQVEC INT15,_int15_handler diff --git a/arch/c6x/kernel/vmlinux.lds.S b/arch/c6x/kernel/vmlinux.lds.S new file mode 100644 index 000000000000..1d81c4c129ec --- /dev/null +++ b/arch/c6x/kernel/vmlinux.lds.S @@ -0,0 +1,162 @@ +/* + * ld script for the c6x kernel + * + * Copyright (C) 2010, 2011 Texas Instruments Incorporated + * Mark Salter <msalter@redhat.com> + */ +#include <asm-generic/vmlinux.lds.h> +#include <asm/thread_info.h> +#include <asm/page.h> + +ENTRY(_c_int00) + +#if defined(CONFIG_CPU_BIG_ENDIAN) +jiffies = jiffies_64 + 4; +#else +jiffies = jiffies_64; +#endif + +#define READONLY_SEGMENT_START \ + . = PAGE_OFFSET; +#define READWRITE_SEGMENT_START \ + . = ALIGN(128); \ + _data_lma = .; + +SECTIONS +{ + /* + * Start kernel read only segment + */ + READONLY_SEGMENT_START + + .vectors : + { + _vectors_start = .; + *(.vectors) + . = ALIGN(0x400); + _vectors_end = .; + } + + . = ALIGN(0x1000); + .cmdline : + { + *(.cmdline) + } + + /* + * This section contains data which may be shared with other + * cores. It needs to be a fixed offset from PAGE_OFFSET + * regardless of kernel configuration. + */ + .virtio_ipc_dev : + { + *(.virtio_ipc_dev) + } + + . = ALIGN(PAGE_SIZE); + .init : + { + _stext = .; + _sinittext = .; + HEAD_TEXT + INIT_TEXT + _einittext = .; + } + + __init_begin = _stext; + INIT_DATA_SECTION(16) + + PERCPU_SECTION(128) + + . = ALIGN(PAGE_SIZE); + __init_end = .; + + .text : + { + _text = .; + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + IRQENTRY_TEXT + KPROBES_TEXT + *(.fixup) + *(.gnu.warning) + } + + EXCEPTION_TABLE(16) + NOTES + + RO_DATA_SECTION(PAGE_SIZE) + .const : + { + *(.const .const.* .gnu.linkonce.r.*) + *(.switch) + } + + . = ALIGN (8) ; + __fdt_blob : AT(ADDR(__fdt_blob) - LOAD_OFFSET) + { + _fdt_start = . ; /* place for fdt blob */ + *(__fdt_blob) ; /* Any link-placed DTB */ + BYTE(0); /* section always has contents */ + . = _fdt_start + 0x4000; /* Pad up to 16kbyte */ + _fdt_end = . ; + } + + _etext = .; + + /* + * Start kernel read-write segment. + */ + READWRITE_SEGMENT_START + _sdata = .; + + .fardata : AT(ADDR(.fardata) - LOAD_OFFSET) + { + INIT_TASK_DATA(THREAD_SIZE) + NOSAVE_DATA + PAGE_ALIGNED_DATA(PAGE_SIZE) + CACHELINE_ALIGNED_DATA(128) + READ_MOSTLY_DATA(128) + DATA_DATA + CONSTRUCTORS + *(.data1) + *(.fardata .fardata.*) + *(.data.debug_bpt) + } + + .neardata ALIGN(8) : AT(ADDR(.neardata) - LOAD_OFFSET) + { + *(.neardata2 .neardata2.* .gnu.linkonce.s2.*) + *(.neardata .neardata.* .gnu.linkonce.s.*) + . = ALIGN(8); + } + + _edata = .; + + __bss_start = .; + SBSS(8) + BSS(8) + .far : + { + . = ALIGN(8); + *(.dynfar) + *(.far .far.* .gnu.linkonce.b.*) + . = ALIGN(8); + } + __bss_stop = .; + + _end = .; + + DWARF_DEBUG + + /DISCARD/ : + { + EXIT_TEXT + EXIT_DATA + EXIT_CALL + *(.discard) + *(.discard.*) + *(.interp) + } +} diff --git a/arch/c6x/lib/Makefile b/arch/c6x/lib/Makefile new file mode 100644 index 000000000000..ffd3c659091a --- /dev/null +++ b/arch/c6x/lib/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for arch/c6x/lib/ +# + +lib-y := divu.o divi.o pop_rts.o push_rts.o remi.o remu.o strasgi.o llshru.o +lib-y += llshr.o llshl.o negll.o mpyll.o divremi.o divremu.o +lib-y += checksum.o csum_64plus.o memcpy_64plus.o strasgi_64plus.o diff --git a/arch/c6x/lib/checksum.c b/arch/c6x/lib/checksum.c new file mode 100644 index 000000000000..67cc93b0b932 --- /dev/null +++ b/arch/c6x/lib/checksum.c @@ -0,0 +1,36 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/module.h> +#include <net/checksum.h> + +#include <asm/byteorder.h> + +/* + * copy from fs while checksumming, otherwise like csum_partial + */ +__wsum +csum_partial_copy_from_user(const void __user *src, void *dst, int len, + __wsum sum, int *csum_err) +{ + int missing; + + missing = __copy_from_user(dst, src, len); + if (missing) { + memset(dst + len - missing, 0, missing); + *csum_err = -EFAULT; + } else + *csum_err = 0; + + return csum_partial(dst, len, sum); +} +EXPORT_SYMBOL(csum_partial_copy_from_user); + +/* These are from csum_64plus.S */ +EXPORT_SYMBOL(csum_partial); +EXPORT_SYMBOL(csum_partial_copy); +EXPORT_SYMBOL(ip_compute_csum); +EXPORT_SYMBOL(ip_fast_csum); diff --git a/arch/c6x/lib/csum_64plus.S b/arch/c6x/lib/csum_64plus.S new file mode 100644 index 000000000000..6d2589647227 --- /dev/null +++ b/arch/c6x/lib/csum_64plus.S @@ -0,0 +1,419 @@ +; +; linux/arch/c6x/lib/csum_64plus.s +; +; Port on Texas Instruments TMS320C6x architecture +; +; Copyright (C) 2006, 2009, 2010, 2011 Texas Instruments Incorporated +; Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) +; +; This program is free software; you can redistribute it and/or modify +; it under the terms of the GNU General Public License version 2 as +; published by the Free Software Foundation. +; +#include <linux/linkage.h> + +; +;unsigned int csum_partial_copy(const char *src, char * dst, +; int len, int sum) +; +; A4: src +; B4: dst +; A6: len +; B6: sum +; return csum in A4 +; + + .text +ENTRY(csum_partial_copy) + MVC .S2 ILC,B30 + + MV .D1X B6,A31 ; given csum + ZERO .D1 A9 ; csum (a side) +|| ZERO .D2 B9 ; csum (b side) +|| SHRU .S2X A6,2,B5 ; len / 4 + + ;; Check alignment and size + AND .S1 3,A4,A1 +|| AND .S2 3,B4,B0 + OR .L2X B0,A1,B0 ; non aligned condition +|| MVC .S2 B5,ILC +|| MVK .D2 1,B2 +|| MV .D1X B5,A1 ; words condition + [!A1] B .S1 L8 + [B0] BNOP .S1 L6,5 + + SPLOOP 1 + + ;; Main loop for aligned words + LDW .D1T1 *A4++,A7 + NOP 4 + MV .S2X A7,B7 +|| EXTU .S1 A7,0,16,A16 + STW .D2T2 B7,*B4++ +|| MPYU .M2 B7,B2,B8 +|| ADD .L1 A16,A9,A9 + NOP + SPKERNEL 8,0 +|| ADD .L2 B8,B9,B9 + + ZERO .D1 A1 +|| ADD .L1X A9,B9,A9 ; add csum from a and b sides + +L6: + [!A1] BNOP .S1 L8,5 + + ;; Main loop for non-aligned words + SPLOOP 2 + || MVK .L1 1,A2 + + LDNW .D1T1 *A4++,A7 + NOP 3 + + NOP + MV .S2X A7,B7 + || EXTU .S1 A7,0,16,A16 + || MPYU .M1 A7,A2,A8 + + ADD .L1 A16,A9,A9 + SPKERNEL 6,0 + || STNW .D2T2 B7,*B4++ + || ADD .L1 A8,A9,A9 + +L8: AND .S2X 2,A6,B5 + CMPGT .L2 B5,0,B0 + [!B0] BNOP .S1 L82,4 + + ;; Manage half-word + ZERO .L1 A7 +|| ZERO .D1 A8 + +#ifdef CONFIG_CPU_BIG_ENDIAN + + LDBU .D1T1 *A4++,A7 + LDBU .D1T1 *A4++,A8 + NOP 3 + SHL .S1 A7,8,A0 + ADD .S1 A8,A9,A9 + STB .D2T1 A7,*B4++ +|| ADD .S1 A0,A9,A9 + STB .D2T1 A8,*B4++ + +#else + + LDBU .D1T1 *A4++,A7 + LDBU .D1T1 *A4++,A8 + NOP 3 + ADD .S1 A7,A9,A9 + SHL .S1 A8,8,A0 + + STB .D2T1 A7,*B4++ +|| ADD .S1 A0,A9,A9 + STB .D2T1 A8,*B4++ + +#endif + + ;; Manage eventually the last byte +L82: AND .S2X 1,A6,B0 + [!B0] BNOP .S1 L9,5 + +|| ZERO .L1 A7 + +L83: LDBU .D1T1 *A4++,A7 + NOP 4 + + MV .L2X A7,B7 + +#ifdef CONFIG_CPU_BIG_ENDIAN + + STB .D2T2 B7,*B4++ +|| SHL .S1 A7,8,A7 + ADD .S1 A7,A9,A9 + +#else + + STB .D2T2 B7,*B4++ +|| ADD .S1 A7,A9,A9 + +#endif + + ;; Fold the csum +L9: SHRU .S2X A9,16,B0 + [!B0] BNOP .S1 L10,5 + +L91: SHRU .S2X A9,16,B4 +|| EXTU .S1 A9,16,16,A3 + ADD .D1X A3,B4,A9 + + SHRU .S1 A9,16,A0 + [A0] BNOP .S1 L91,5 + +L10: ADD .D1 A31,A9,A9 + MV .D1 A9,A4 + + BNOP .S2 B3,4 + MVC .S2 B30,ILC +ENDPROC(csum_partial_copy) + +; +;unsigned short +;ip_fast_csum(unsigned char *iph, unsigned int ihl) +;{ +; unsigned int checksum = 0; +; unsigned short *tosum = (unsigned short *) iph; +; int len; +; +; len = ihl*4; +; +; if (len <= 0) +; return 0; +; +; while(len) { +; len -= 2; +; checksum += *tosum++; +; } +; if (len & 1) +; checksum += *(unsigned char*) tosum; +; +; while(checksum >> 16) +; checksum = (checksum & 0xffff) + (checksum >> 16); +; +; return ~checksum; +;} +; +; A4: iph +; B4: ihl +; return checksum in A4 +; + .text + +ENTRY(ip_fast_csum) + ZERO .D1 A5 + || MVC .S2 ILC,B30 + SHL .S2 B4,2,B0 + CMPGT .L2 B0,0,B1 + [!B1] BNOP .S1 L15,4 + [!B1] ZERO .D1 A3 + + [!B0] B .S1 L12 + SHRU .S2 B0,1,B0 + MVC .S2 B0,ILC + NOP 3 + + SPLOOP 1 + LDHU .D1T1 *A4++,A3 + NOP 3 + NOP + SPKERNEL 5,0 + || ADD .L1 A3,A5,A5 + +L12: SHRU .S1 A5,16,A0 + [!A0] BNOP .S1 L14,5 + +L13: SHRU .S2X A5,16,B4 + EXTU .S1 A5,16,16,A3 + ADD .D1X A3,B4,A5 + SHRU .S1 A5,16,A0 + [A0] BNOP .S1 L13,5 + +L14: NOT .D1 A5,A3 + EXTU .S1 A3,16,16,A3 + +L15: BNOP .S2 B3,3 + MVC .S2 B30,ILC + MV .D1 A3,A4 +ENDPROC(ip_fast_csum) + +; +;unsigned short +;do_csum(unsigned char *buff, unsigned int len) +;{ +; int odd, count; +; unsigned int result = 0; +; +; if (len <= 0) +; goto out; +; odd = 1 & (unsigned long) buff; +; if (odd) { +;#ifdef __LITTLE_ENDIAN +; result += (*buff << 8); +;#else +; result = *buff; +;#endif +; len--; +; buff++; +; } +; count = len >> 1; /* nr of 16-bit words.. */ +; if (count) { +; if (2 & (unsigned long) buff) { +; result += *(unsigned short *) buff; +; count--; +; len -= 2; +; buff += 2; +; } +; count >>= 1; /* nr of 32-bit words.. */ +; if (count) { +; unsigned int carry = 0; +; do { +; unsigned int w = *(unsigned int *) buff; +; count--; +; buff += 4; +; result += carry; +; result += w; +; carry = (w > result); +; } while (count); +; result += carry; +; result = (result & 0xffff) + (result >> 16); +; } +; if (len & 2) { +; result += *(unsigned short *) buff; +; buff += 2; +; } +; } +; if (len & 1) +;#ifdef __LITTLE_ENDIAN +; result += *buff; +;#else +; result += (*buff << 8); +;#endif +; result = (result & 0xffff) + (result >> 16); +; /* add up carry.. */ +; result = (result & 0xffff) + (result >> 16); +; if (odd) +; result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); +;out: +; return result; +;} +; +; A4: buff +; B4: len +; return checksum in A4 +; + +ENTRY(do_csum) + CMPGT .L2 B4,0,B0 + [!B0] BNOP .S1 L26,3 + EXTU .S1 A4,31,31,A0 + + MV .L1 A0,A3 +|| MV .S1X B3,A5 +|| MV .L2 B4,B3 +|| ZERO .D1 A1 + +#ifdef CONFIG_CPU_BIG_ENDIAN + [A0] SUB .L2 B3,1,B3 +|| [A0] LDBU .D1T1 *A4++,A1 +#else + [!A0] BNOP .S1 L21,5 +|| [A0] LDBU .D1T1 *A4++,A0 + SUB .L2 B3,1,B3 +|| SHL .S1 A0,8,A1 +L21: +#endif + SHR .S2 B3,1,B0 + [!B0] BNOP .S1 L24,3 + MVK .L1 2,A0 + AND .L1 A4,A0,A0 + + [!A0] BNOP .S1 L22,5 +|| [A0] LDHU .D1T1 *A4++,A0 + SUB .L2 B0,1,B0 +|| SUB .S2 B3,2,B3 +|| ADD .L1 A0,A1,A1 +L22: + SHR .S2 B0,1,B0 +|| ZERO .L1 A0 + + [!B0] BNOP .S1 L23,5 +|| [B0] MVC .S2 B0,ILC + + SPLOOP 3 + SPMASK L1 +|| MV .L1 A1,A2 +|| LDW .D1T1 *A4++,A1 + + NOP 4 + ADD .L1 A0,A1,A0 + ADD .L1 A2,A0,A2 + + SPKERNEL 1,2 +|| CMPGTU .L1 A1,A2,A0 + + ADD .L1 A0,A2,A6 + EXTU .S1 A6,16,16,A7 + SHRU .S2X A6,16,B0 + NOP 1 + ADD .L1X A7,B0,A1 +L23: + MVK .L2 2,B0 + AND .L2 B3,B0,B0 + [B0] LDHU .D1T1 *A4++,A0 + NOP 4 + [B0] ADD .L1 A0,A1,A1 +L24: + EXTU .S2 B3,31,31,B0 +#ifdef CONFIG_CPU_BIG_ENDIAN + [!B0] BNOP .S1 L25,4 +|| [B0] LDBU .D1T1 *A4,A0 + SHL .S1 A0,8,A0 + ADD .L1 A0,A1,A1 +L25: +#else + [B0] LDBU .D1T1 *A4,A0 + NOP 4 + [B0] ADD .L1 A0,A1,A1 +#endif + EXTU .S1 A1,16,16,A0 + SHRU .S2X A1,16,B0 + NOP 1 + ADD .L1X A0,B0,A0 + SHRU .S1 A0,16,A1 + ADD .L1 A0,A1,A0 + EXTU .S1 A0,16,16,A1 + EXTU .S1 A1,16,24,A2 + + EXTU .S1 A1,24,16,A0 +|| MV .L2X A3,B0 + + [B0] OR .L1 A0,A2,A1 +L26: + NOP 1 + BNOP .S2X A5,4 + MV .L1 A1,A4 +ENDPROC(do_csum) + +;__wsum csum_partial(const void *buff, int len, __wsum wsum) +;{ +; unsigned int sum = (__force unsigned int)wsum; +; unsigned int result = do_csum(buff, len); +; +; /* add in old sum, and carry.. */ +; result += sum; +; if (sum > result) +; result += 1; +; return (__force __wsum)result; +;} +; +ENTRY(csum_partial) + MV .L1X B3,A9 +|| CALLP .S2 do_csum,B3 +|| MV .S1 A6,A8 + BNOP .S2X A9,2 + ADD .L1 A8,A4,A1 + CMPGTU .L1 A8,A1,A0 + ADD .L1 A1,A0,A4 +ENDPROC(csum_partial) + +;unsigned short +;ip_compute_csum(unsigned char *buff, unsigned int len) +; +; A4: buff +; B4: len +; return checksum in A4 + +ENTRY(ip_compute_csum) + MV .L1X B3,A9 +|| CALLP .S2 do_csum,B3 + BNOP .S2X A9,3 + NOT .S1 A4,A4 + CLR .S1 A4,16,31,A4 +ENDPROC(ip_compute_csum) diff --git a/arch/c6x/lib/divi.S b/arch/c6x/lib/divi.S new file mode 100644 index 000000000000..4bde924f2a98 --- /dev/null +++ b/arch/c6x/lib/divi.S @@ -0,0 +1,53 @@ +;; Copyright 2010 Free Software Foundation, Inc. +;; Contributed by Bernd Schmidt <bernds@codesourcery.com>. +;; +;; This program is free software; you can redistribute it and/or modify +;; it under the terms of the GNU General Public License as published by +;; the Free Software Foundation; either version 2 of the License, or +;; (at your option) any later version. +;; +;; This program is distributed in the hope that it will be useful, +;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;; GNU General Public License for more details. +;; +;; You should have received a copy of the GNU General Public License +;; along with this program; if not, write to the Free Software +;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +#include <linux/linkage.h> + + ;; ABI considerations for the divide functions + ;; The following registers are call-used: + ;; __c6xabi_divi A0,A1,A2,A4,A6,B0,B1,B2,B4,B5 + ;; __c6xabi_divu A0,A1,A2,A4,A6,B0,B1,B2,B4 + ;; __c6xabi_remi A1,A2,A4,A5,A6,B0,B1,B2,B4 + ;; __c6xabi_remu A1,A4,A5,A7,B0,B1,B2,B4 + ;; + ;; In our implementation, divu and remu are leaf functions, + ;; while both divi and remi call into divu. + ;; A0 is not clobbered by any of the functions. + ;; divu does not clobber B2 either, which is taken advantage of + ;; in remi. + ;; divi uses B5 to hold the original return address during + ;; the call to divu. + ;; remi uses B2 and A5 to hold the input values during the + ;; call to divu. It stores B3 in on the stack. + + .text +ENTRY(__c6xabi_divi) + call .s2 __c6xabi_divu +|| mv .d2 B3, B5 +|| cmpgt .l1 0, A4, A1 +|| cmpgt .l2 0, B4, B1 + + [A1] neg .l1 A4, A4 +|| [B1] neg .l2 B4, B4 +|| xor .s1x A1, B1, A1 + [A1] addkpc .s2 _divu_ret, B3, 4 +_divu_ret: + neg .l1 A4, A4 +|| mv .l2 B3,B5 +|| ret .s2 B5 + nop 5 +ENDPROC(__c6xabi_divi) diff --git a/arch/c6x/lib/divremi.S b/arch/c6x/lib/divremi.S new file mode 100644 index 000000000000..64bc5aa95ad3 --- /dev/null +++ b/arch/c6x/lib/divremi.S @@ -0,0 +1,46 @@ +;; Copyright 2010 Free Software Foundation, Inc. +;; Contributed by Bernd Schmidt <bernds@codesourcery.com>. +;; +;; This program is free software; you can redistribute it and/or modify +;; it under the terms of the GNU General Public License as published by +;; the Free Software Foundation; either version 2 of the License, or +;; (at your option) any later version. +;; +;; This program is distributed in the hope that it will be useful, +;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;; GNU General Public License for more details. +;; +;; You should have received a copy of the GNU General Public License +;; along with this program; if not, write to the Free Software +;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +#include <linux/linkage.h> + + .text +ENTRY(__c6xabi_divremi) + stw .d2t2 B3, *B15--[2] +|| cmpgt .l1 0, A4, A1 +|| cmpgt .l2 0, B4, B2 +|| mv .s1 A4, A5 +|| call .s2 __c6xabi_divu + + [A1] neg .l1 A4, A4 +|| [B2] neg .l2 B4, B4 +|| xor .s2x B2, A1, B0 +|| mv .d2 B4, B2 + + [B0] addkpc .s2 _divu_ret_1, B3, 1 + [!B0] addkpc .s2 _divu_ret_2, B3, 1 + nop 2 +_divu_ret_1: + neg .l1 A4, A4 +_divu_ret_2: + ldw .d2t2 *++B15[2], B3 + + mpy32 .m1x A4, B2, A6 + nop 3 + ret .s2 B3 + sub .l1 A5, A6, A5 + nop 4 +ENDPROC(__c6xabi_divremi) diff --git a/arch/c6x/lib/divremu.S b/arch/c6x/lib/divremu.S new file mode 100644 index 000000000000..caa9f23ee167 --- /dev/null +++ b/arch/c6x/lib/divremu.S @@ -0,0 +1,87 @@ +;; Copyright 2011 Free Software Foundation, Inc. +;; Contributed by Bernd Schmidt <bernds@codesourcery.com>. +;; +;; This program is free software; you can redistribute it and/or modify +;; it under the terms of the GNU General Public License as published by +;; the Free Software Foundation; either version 2 of the License, or +;; (at your option) any later version. +;; +;; This program is distributed in the hope that it will be useful, +;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;; GNU General Public License for more details. +;; +;; You should have received a copy of the GNU General Public License +;; along with this program; if not, write to the Free Software +;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +#include <linux/linkage.h> + + .text +ENTRY(__c6xabi_divremu) + ;; We use a series of up to 31 subc instructions. First, we find + ;; out how many leading zero bits there are in the divisor. This + ;; gives us both a shift count for aligning (shifting) the divisor + ;; to the, and the number of times we have to execute subc. + + ;; At the end, we have both the remainder and most of the quotient + ;; in A4. The top bit of the quotient is computed first and is + ;; placed in A2. + + ;; Return immediately if the dividend is zero. Setting B4 to 1 + ;; is a trick to allow us to leave the following insns in the jump + ;; delay slot without affecting the result. + mv .s2x A4, B1 + + [b1] lmbd .l2 1, B4, B1 +||[!b1] b .s2 B3 ; RETURN A +||[!b1] mvk .d2 1, B4 + +||[!b1] zero .s1 A5 + mv .l1x B1, A6 +|| shl .s2 B4, B1, B4 + + ;; The loop performs a maximum of 28 steps, so we do the + ;; first 3 here. + cmpltu .l1x A4, B4, A2 + [!A2] sub .l1x A4, B4, A4 +|| shru .s2 B4, 1, B4 +|| xor .s1 1, A2, A2 + + shl .s1 A2, 31, A2 +|| [b1] subc .l1x A4,B4,A4 +|| [b1] add .s2 -1, B1, B1 + [b1] subc .l1x A4,B4,A4 +|| [b1] add .s2 -1, B1, B1 + + ;; RETURN A may happen here (note: must happen before the next branch) +__divremu0: + cmpgt .l2 B1, 7, B0 +|| [b1] subc .l1x A4,B4,A4 +|| [b1] add .s2 -1, B1, B1 + [b1] subc .l1x A4,B4,A4 +|| [b1] add .s2 -1, B1, B1 +|| [b0] b .s1 __divremu0 + [b1] subc .l1x A4,B4,A4 +|| [b1] add .s2 -1, B1, B1 + [b1] subc .l1x A4,B4,A4 +|| [b1] add .s2 -1, B1, B1 + [b1] subc .l1x A4,B4,A4 +|| [b1] add .s2 -1, B1, B1 + [b1] subc .l1x A4,B4,A4 +|| [b1] add .s2 -1, B1, B1 + [b1] subc .l1x A4,B4,A4 +|| [b1] add .s2 -1, B1, B1 + ;; loop backwards branch happens here + + ret .s2 B3 +|| mvk .s1 32, A1 + sub .l1 A1, A6, A6 +|| extu .s1 A4, A6, A5 + shl .s1 A4, A6, A4 + shru .s1 A4, 1, A4 +|| sub .l1 A6, 1, A6 + or .l1 A2, A4, A4 + shru .s1 A4, A6, A4 + nop +ENDPROC(__c6xabi_divremu) diff --git a/arch/c6x/lib/divu.S b/arch/c6x/lib/divu.S new file mode 100644 index 000000000000..64af3c006dd3 --- /dev/null +++ b/arch/c6x/lib/divu.S @@ -0,0 +1,98 @@ +;; Copyright 2010 Free Software Foundation, Inc. +;; Contributed by Bernd Schmidt <bernds@codesourcery.com>. +;; +;; This program is free software; you can redistribute it and/or modify +;; it under the terms of the GNU General Public License as published by +;; the Free Software Foundation; either version 2 of the License, or +;; (at your option) any later version. +;; +;; This program is distributed in the hope that it will be useful, +;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;; GNU General Public License for more details. +;; +;; You should have received a copy of the GNU General Public License +;; along with this program; if not, write to the Free Software +;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +#include <linux/linkage.h> + + ;; ABI considerations for the divide functions + ;; The following registers are call-used: + ;; __c6xabi_divi A0,A1,A2,A4,A6,B0,B1,B2,B4,B5 + ;; __c6xabi_divu A0,A1,A2,A4,A6,B0,B1,B2,B4 + ;; __c6xabi_remi A1,A2,A4,A5,A6,B0,B1,B2,B4 + ;; __c6xabi_remu A1,A4,A5,A7,B0,B1,B2,B4 + ;; + ;; In our implementation, divu and remu are leaf functions, + ;; while both divi and remi call into divu. + ;; A0 is not clobbered by any of the functions. + ;; divu does not clobber B2 either, which is taken advantage of + ;; in remi. + ;; divi uses B5 to hold the original return address during + ;; the call to divu. + ;; remi uses B2 and A5 to hold the input values during the + ;; call to divu. It stores B3 in on the stack. + + .text +ENTRY(__c6xabi_divu) + ;; We use a series of up to 31 subc instructions. First, we find + ;; out how many leading zero bits there are in the divisor. This + ;; gives us both a shift count for aligning (shifting) the divisor + ;; to the, and the number of times we have to execute subc. + + ;; At the end, we have both the remainder and most of the quotient + ;; in A4. The top bit of the quotient is computed first and is + ;; placed in A2. + + ;; Return immediately if the dividend is zero. + mv .s2x A4, B1 + [B1] lmbd .l2 1, B4, B1 +|| [!B1] b .s2 B3 ; RETURN A +|| [!B1] mvk .d2 1, B4 + mv .l1x B1, A6 +|| shl .s2 B4, B1, B4 + + ;; The loop performs a maximum of 28 steps, so we do the + ;; first 3 here. + cmpltu .l1x A4, B4, A2 + [!A2] sub .l1x A4, B4, A4 +|| shru .s2 B4, 1, B4 +|| xor .s1 1, A2, A2 + + shl .s1 A2, 31, A2 +|| [B1] subc .l1x A4,B4,A4 +|| [B1] add .s2 -1, B1, B1 + [B1] subc .l1x A4,B4,A4 +|| [B1] add .s2 -1, B1, B1 + + ;; RETURN A may happen here (note: must happen before the next branch) +_divu_loop: + cmpgt .l2 B1, 7, B0 +|| [B1] subc .l1x A4,B4,A4 +|| [B1] add .s2 -1, B1, B1 + [B1] subc .l1x A4,B4,A4 +|| [B1] add .s2 -1, B1, B1 +|| [B0] b .s1 _divu_loop + [B1] subc .l1x A4,B4,A4 +|| [B1] add .s2 -1, B1, B1 + [B1] subc .l1x A4,B4,A4 +|| [B1] add .s2 -1, B1, B1 + [B1] subc .l1x A4,B4,A4 +|| [B1] add .s2 -1, B1, B1 + [B1] subc .l1x A4,B4,A4 +|| [B1] add .s2 -1, B1, B1 + [B1] subc .l1x A4,B4,A4 +|| [B1] add .s2 -1, B1, B1 + ;; loop backwards branch happens here + + ret .s2 B3 +|| mvk .s1 32, A1 + sub .l1 A1, A6, A6 + shl .s1 A4, A6, A4 + shru .s1 A4, 1, A4 +|| sub .l1 A6, 1, A6 + or .l1 A2, A4, A4 + shru .s1 A4, A6, A4 + nop +ENDPROC(__c6xabi_divu) diff --git a/arch/c6x/lib/llshl.S b/arch/c6x/lib/llshl.S new file mode 100644 index 000000000000..7b105e2d1b78 --- /dev/null +++ b/arch/c6x/lib/llshl.S @@ -0,0 +1,37 @@ +;; Copyright (C) 2010 Texas Instruments Incorporated +;; Contributed by Mark Salter <msalter@redhat.com>. +;; +;; This program is free software; you can redistribute it and/or modify +;; it under the terms of the GNU General Public License as published by +;; the Free Software Foundation; either version 2 of the License, or +;; (at your option) any later version. +;; +;; This program is distributed in the hope that it will be useful, +;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;; GNU General Public License for more details. +;; +;; You should have received a copy of the GNU General Public License +;; along with this program; if not, write to the Free Software +;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +;; uint64_t __c6xabi_llshl(uint64_t val, uint shift) + +#include <linux/linkage.h> + + .text +ENTRY(__c6xabi_llshl) + mv .l1x B4,A1 + [!A1] b .s2 B3 ; just return if zero shift + mvk .s1 32,A0 + sub .d1 A0,A1,A0 + cmplt .l1 0,A0,A2 + [A2] shru .s1 A4,A0,A0 + [!A2] neg .l1 A0,A5 +|| [A2] shl .s1 A5,A1,A5 + [!A2] shl .s1 A4,A5,A5 +|| [A2] or .d1 A5,A0,A5 +|| [!A2] mvk .l1 0,A4 + [A2] shl .s1 A4,A1,A4 + bnop .s2 B3,5 +ENDPROC(__c6xabi_llshl) diff --git a/arch/c6x/lib/llshr.S b/arch/c6x/lib/llshr.S new file mode 100644 index 000000000000..fde1bec7cf5a --- /dev/null +++ b/arch/c6x/lib/llshr.S @@ -0,0 +1,38 @@ +;; Copyright (C) 2010 Texas Instruments Incorporated +;; Contributed by Mark Salter <msalter@redhat.com>. +;; +;; This program is free software; you can redistribute it and/or modify +;; it under the terms of the GNU General Public License as published by +;; the Free Software Foundation; either version 2 of the License, or +;; (at your option) any later version. +;; +;; This program is distributed in the hope that it will be useful, +;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;; GNU General Public License for more details. +;; +;; You should have received a copy of the GNU General Public License +;; along with this program; if not, write to the Free Software +;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +;; uint64_t __c6xabi_llshr(uint64_t val, uint shift) + +#include <linux/linkage.h> + + .text +ENTRY(__c6xabi_llshr) + mv .l1x B4,A1 + [!A1] b .s2 B3 ; return if zero shift count + mvk .s1 32,A0 + sub .d1 A0,A1,A0 + cmplt .l1 0,A0,A2 + [A2] shl .s1 A5,A0,A0 + nop + [!A2] neg .l1 A0,A4 +|| [A2] shru .s1 A4,A1,A4 + [!A2] shr .s1 A5,A4,A4 +|| [A2] or .d1 A4,A0,A4 + [!A2] shr .s1 A5,0x1f,A5 + [A2] shr .s1 A5,A1,A5 + bnop .s2 B3,5 +ENDPROC(__c6xabi_llshr) diff --git a/arch/c6x/lib/llshru.S b/arch/c6x/lib/llshru.S new file mode 100644 index 000000000000..596ae3ff5c0f --- /dev/null +++ b/arch/c6x/lib/llshru.S @@ -0,0 +1,38 @@ +;; Copyright (C) 2010 Texas Instruments Incorporated +;; Contributed by Mark Salter <msalter@redhat.com>. +;; +;; This program is free software; you can redistribute it and/or modify +;; it under the terms of the GNU General Public License as published by +;; the Free Software Foundation; either version 2 of the License, or +;; (at your option) any later version. +;; +;; This program is distributed in the hope that it will be useful, +;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;; GNU General Public License for more details. +;; +;; You should have received a copy of the GNU General Public License +;; along with this program; if not, write to the Free Software +;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +;; uint64_t __c6xabi_llshru(uint64_t val, uint shift) + +#include <linux/linkage.h> + + .text +ENTRY(__c6xabi_llshru) + mv .l1x B4,A1 + [!A1] b .s2 B3 ; return if zero shift count + mvk .s1 32,A0 + sub .d1 A0,A1,A0 + cmplt .l1 0,A0,A2 + [A2] shl .s1 A5,A0,A0 + nop + [!A2] neg .l1 A0,A4 +|| [A2] shru .s1 A4,A1,A4 + [!A2] shru .s1 A5,A4,A4 +|| [A2] or .d1 A4,A0,A4 +|| [!A2] mvk .l1 0,A5 + [A2] shru .s1 A5,A1,A5 + bnop .s2 B3,5 +ENDPROC(__c6xabi_llshru) diff --git a/arch/c6x/lib/memcpy_64plus.S b/arch/c6x/lib/memcpy_64plus.S new file mode 100644 index 000000000000..0bbc2cbf9318 --- /dev/null +++ b/arch/c6x/lib/memcpy_64plus.S @@ -0,0 +1,46 @@ +; Port on Texas Instruments TMS320C6x architecture +; +; Copyright (C) 2006, 2009, 2010 Texas Instruments Incorporated +; Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) +; +; This program is free software; you can redistribute it and/or modify +; it under the terms of the GNU General Public License version 2 as +; published by the Free Software Foundation. +; + +#include <linux/linkage.h> + + .text + +ENTRY(memcpy) + AND .L1 0x1,A6,A0 + || AND .S1 0x2,A6,A1 + || AND .L2X 0x4,A6,B0 + || MV .D1 A4,A3 + || MVC .S2 ILC,B2 + + [A0] LDB .D2T1 *B4++,A5 + [A1] LDB .D2T1 *B4++,A7 + [A1] LDB .D2T1 *B4++,A8 + [B0] LDNW .D2T1 *B4++,A9 + || SHRU .S2X A6,0x3,B1 + [!B1] BNOP .S2 B3,1 + + [A0] STB .D1T1 A5,*A3++ + ||[B1] MVC .S2 B1,ILC + [A1] STB .D1T1 A7,*A3++ + [A1] STB .D1T1 A8,*A3++ + [B0] STNW .D1T1 A9,*A3++ ; return when len < 8 + + SPLOOP 2 + + LDNDW .D2T1 *B4++,A9:A8 + NOP 3 + + NOP + SPKERNEL 0,0 + || STNDW .D1T1 A9:A8,*A3++ + + BNOP .S2 B3,4 + MVC .S2 B2,ILC +ENDPROC(memcpy) diff --git a/arch/c6x/lib/mpyll.S b/arch/c6x/lib/mpyll.S new file mode 100644 index 000000000000..f1034418b4db --- /dev/null +++ b/arch/c6x/lib/mpyll.S @@ -0,0 +1,49 @@ +;; Copyright (C) 2010 Texas Instruments Incorporated +;; Contributed by Mark Salter <msalter@redhat.com>. +;; +;; This program is free software; you can redistribute it and/or modify +;; it under the terms of the GNU General Public License as published by +;; the Free Software Foundation; either version 2 of the License, or +;; (at your option) any later version. +;; +;; This program is distributed in the hope that it will be useful, +;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;; GNU General Public License for more details. +;; +;; You should have received a copy of the GNU General Public License +;; along with this program; if not, write to the Free Software +;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +#include <linux/linkage.h> + + ;; uint64_t __c6xabi_mpyll(uint64_t x, uint64_t y) + ;; + ;; 64x64 multiply + ;; First compute partial results using 32-bit parts of x and y: + ;; + ;; b63 b32 b31 b0 + ;; ----------------------------- + ;; | 1 | 0 | + ;; ----------------------------- + ;; + ;; P0 = X0*Y0 + ;; P1 = X0*Y1 + X1*Y0 + ;; P2 = X1*Y1 + ;; + ;; result = (P2 << 64) + (P1 << 32) + P0 + ;; + ;; Since the result is also 64-bit, we can skip the P2 term. + + .text +ENTRY(__c6xabi_mpyll) + mpy32u .m1x A4,B4,A1:A0 ; X0*Y0 + b .s2 B3 + || mpy32u .m2x B5,A4,B1:B0 ; X0*Y1 (don't need upper 32-bits) + || mpy32u .m1x A5,B4,A3:A2 ; X1*Y0 (don't need upper 32-bits) + nop + nop + mv .s1 A0,A4 + add .l1x A2,B0,A5 + add .s1 A1,A5,A5 +ENDPROC(__c6xabi_mpyll) diff --git a/arch/c6x/lib/negll.S b/arch/c6x/lib/negll.S new file mode 100644 index 000000000000..82f4bcec9afb --- /dev/null +++ b/arch/c6x/lib/negll.S @@ -0,0 +1,31 @@ +;; Copyright (C) 2010 Texas Instruments Incorporated +;; Contributed by Mark Salter <msalter@redhat.com>. +;; +;; This program is free software; you can redistribute it and/or modify +;; it under the terms of the GNU General Public License as published by +;; the Free Software Foundation; either version 2 of the License, or +;; (at your option) any later version. +;; +;; This program is distributed in the hope that it will be useful, +;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;; GNU General Public License for more details. +;; +;; You should have received a copy of the GNU General Public License +;; along with this program; if not, write to the Free Software +;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +;; int64_t __c6xabi_negll(int64_t val) + +#include <linux/linkage.h> + + .text +ENTRY(__c6xabi_negll) + b .s2 B3 + mvk .l1 0,A0 + subu .l1 A0,A4,A3:A2 + sub .l1 A0,A5,A0 +|| ext .s1 A3,24,24,A5 + add .l1 A5,A0,A5 + mv .s1 A2,A4 +ENDPROC(__c6xabi_negll) diff --git a/arch/c6x/lib/pop_rts.S b/arch/c6x/lib/pop_rts.S new file mode 100644 index 000000000000..d7d96c70e9e7 --- /dev/null +++ b/arch/c6x/lib/pop_rts.S @@ -0,0 +1,32 @@ +;; Copyright 2010 Free Software Foundation, Inc. +;; Contributed by Bernd Schmidt <bernds@codesourcery.com>. +;; +;; This program is free software; you can redistribute it and/or modify +;; it under the terms of the GNU General Public License as published by +;; the Free Software Foundation; either version 2 of the License, or +;; (at your option) any later version. +;; +;; This program is distributed in the hope that it will be useful, +;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;; GNU General Public License for more details. +;; +;; You should have received a copy of the GNU General Public License +;; along with this program; if not, write to the Free Software +;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +#include <linux/linkage.h> + + .text + +ENTRY(__c6xabi_pop_rts) + lddw .d2t2 *++B15, B3:B2 + lddw .d2t1 *++B15, A11:A10 + lddw .d2t2 *++B15, B11:B10 + lddw .d2t1 *++B15, A13:A12 + lddw .d2t2 *++B15, B13:B12 + lddw .d2t1 *++B15, A15:A14 +|| b .s2 B3 + ldw .d2t2 *++B15[2], B14 + nop 4 +ENDPROC(__c6xabi_pop_rts) diff --git a/arch/c6x/lib/push_rts.S b/arch/c6x/lib/push_rts.S new file mode 100644 index 000000000000..f6e3db3b6065 --- /dev/null +++ b/arch/c6x/lib/push_rts.S @@ -0,0 +1,31 @@ +;; Copyright 2010 Free Software Foundation, Inc. +;; Contributed by Bernd Schmidt <bernds@codesourcery.com>. +;; +;; This program is free software; you can redistribute it and/or modify +;; it under the terms of the GNU General Public License as published by +;; the Free Software Foundation; either version 2 of the License, or +;; (at your option) any later version. +;; +;; This program is distributed in the hope that it will be useful, +;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;; GNU General Public License for more details. +;; +;; You should have received a copy of the GNU General Public License +;; along with this program; if not, write to the Free Software +;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +#include <linux/linkage.h> + + .text + +ENTRY(__c6xabi_push_rts) + stw .d2t2 B14, *B15--[2] + stdw .d2t1 A15:A14, *B15-- +|| b .s2x A3 + stdw .d2t2 B13:B12, *B15-- + stdw .d2t1 A13:A12, *B15-- + stdw .d2t2 B11:B10, *B15-- + stdw .d2t1 A11:A10, *B15-- + stdw .d2t2 B3:B2, *B15-- +ENDPROC(__c6xabi_push_rts) diff --git a/arch/c6x/lib/remi.S b/arch/c6x/lib/remi.S new file mode 100644 index 000000000000..6f2ca18c3f98 --- /dev/null +++ b/arch/c6x/lib/remi.S @@ -0,0 +1,64 @@ +;; Copyright 2010 Free Software Foundation, Inc. +;; Contributed by Bernd Schmidt <bernds@codesourcery.com>. +;; +;; This program is free software; you can redistribute it and/or modify +;; it under the terms of the GNU General Public License as published by +;; the Free Software Foundation; either version 2 of the License, or +;; (at your option) any later version. +;; +;; This program is distributed in the hope that it will be useful, +;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;; GNU General Public License for more details. +;; +;; You should have received a copy of the GNU General Public License +;; along with this program; if not, write to the Free Software +;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +#include <linux/linkage.h> + + ;; ABI considerations for the divide functions + ;; The following registers are call-used: + ;; __c6xabi_divi A0,A1,A2,A4,A6,B0,B1,B2,B4,B5 + ;; __c6xabi_divu A0,A1,A2,A4,A6,B0,B1,B2,B4 + ;; __c6xabi_remi A1,A2,A4,A5,A6,B0,B1,B2,B4 + ;; __c6xabi_remu A1,A4,A5,A7,B0,B1,B2,B4 + ;; + ;; In our implementation, divu and remu are leaf functions, + ;; while both divi and remi call into divu. + ;; A0 is not clobbered by any of the functions. + ;; divu does not clobber B2 either, which is taken advantage of + ;; in remi. + ;; divi uses B5 to hold the original return address during + ;; the call to divu. + ;; remi uses B2 and A5 to hold the input values during the + ;; call to divu. It stores B3 in on the stack. + + .text + +ENTRY(__c6xabi_remi) + stw .d2t2 B3, *B15--[2] +|| cmpgt .l1 0, A4, A1 +|| cmpgt .l2 0, B4, B2 +|| mv .s1 A4, A5 +|| call .s2 __c6xabi_divu + + [A1] neg .l1 A4, A4 +|| [B2] neg .l2 B4, B4 +|| xor .s2x B2, A1, B0 +|| mv .d2 B4, B2 + + [B0] addkpc .s2 _divu_ret_1, B3, 1 + [!B0] addkpc .s2 _divu_ret_2, B3, 1 + nop 2 +_divu_ret_1: + neg .l1 A4, A4 +_divu_ret_2: + ldw .d2t2 *++B15[2], B3 + + mpy32 .m1x A4, B2, A6 + nop 3 + ret .s2 B3 + sub .l1 A5, A6, A4 + nop 4 +ENDPROC(__c6xabi_remi) diff --git a/arch/c6x/lib/remu.S b/arch/c6x/lib/remu.S new file mode 100644 index 000000000000..3fae719185ab --- /dev/null +++ b/arch/c6x/lib/remu.S @@ -0,0 +1,82 @@ +;; Copyright 2010 Free Software Foundation, Inc. +;; Contributed by Bernd Schmidt <bernds@codesourcery.com>. +;; +;; This program is free software; you can redistribute it and/or modify +;; it under the terms of the GNU General Public License as published by +;; the Free Software Foundation; either version 2 of the License, or +;; (at your option) any later version. +;; +;; This program is distributed in the hope that it will be useful, +;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;; GNU General Public License for more details. +;; +;; You should have received a copy of the GNU General Public License +;; along with this program; if not, write to the Free Software +;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +#include <linux/linkage.h> + + ;; ABI considerations for the divide functions + ;; The following registers are call-used: + ;; __c6xabi_divi A0,A1,A2,A4,A6,B0,B1,B2,B4,B5 + ;; __c6xabi_divu A0,A1,A2,A4,A6,B0,B1,B2,B4 + ;; __c6xabi_remi A1,A2,A4,A5,A6,B0,B1,B2,B4 + ;; __c6xabi_remu A1,A4,A5,A7,B0,B1,B2,B4 + ;; + ;; In our implementation, divu and remu are leaf functions, + ;; while both divi and remi call into divu. + ;; A0 is not clobbered by any of the functions. + ;; divu does not clobber B2 either, which is taken advantage of + ;; in remi. + ;; divi uses B5 to hold the original return address during + ;; the call to divu. + ;; remi uses B2 and A5 to hold the input values during the + ;; call to divu. It stores B3 in on the stack. + + + .text + +ENTRY(__c6xabi_remu) + ;; The ABI seems designed to prevent these functions calling each other, + ;; so we duplicate most of the divsi3 code here. + mv .s2x A4, B1 + lmbd .l2 1, B4, B1 +|| [!B1] b .s2 B3 ; RETURN A +|| [!B1] mvk .d2 1, B4 + + mv .l1x B1, A7 +|| shl .s2 B4, B1, B4 + + cmpltu .l1x A4, B4, A1 + [!A1] sub .l1x A4, B4, A4 + shru .s2 B4, 1, B4 + +_remu_loop: + cmpgt .l2 B1, 7, B0 +|| [B1] subc .l1x A4,B4,A4 +|| [B1] add .s2 -1, B1, B1 + ;; RETURN A may happen here (note: must happen before the next branch) + [B1] subc .l1x A4,B4,A4 +|| [B1] add .s2 -1, B1, B1 +|| [B0] b .s1 _remu_loop + [B1] subc .l1x A4,B4,A4 +|| [B1] add .s2 -1, B1, B1 + [B1] subc .l1x A4,B4,A4 +|| [B1] add .s2 -1, B1, B1 + [B1] subc .l1x A4,B4,A4 +|| [B1] add .s2 -1, B1, B1 + [B1] subc .l1x A4,B4,A4 +|| [B1] add .s2 -1, B1, B1 + [B1] subc .l1x A4,B4,A4 +|| [B1] add .s2 -1, B1, B1 + ;; loop backwards branch happens here + + ret .s2 B3 + [B1] subc .l1x A4,B4,A4 +|| [B1] add .s2 -1, B1, B1 + [B1] subc .l1x A4,B4,A4 + + extu .s1 A4, A7, A4 + nop 2 +ENDPROC(__c6xabi_remu) diff --git a/arch/c6x/lib/strasgi.S b/arch/c6x/lib/strasgi.S new file mode 100644 index 000000000000..de2740765536 --- /dev/null +++ b/arch/c6x/lib/strasgi.S @@ -0,0 +1,89 @@ +;; Copyright 2010 Free Software Foundation, Inc. +;; Contributed by Bernd Schmidt <bernds@codesourcery.com>. +;; +;; This program is free software; you can redistribute it and/or modify +;; it under the terms of the GNU General Public License as published by +;; the Free Software Foundation; either version 2 of the License, or +;; (at your option) any later version. +;; +;; This program is distributed in the hope that it will be useful, +;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;; GNU General Public License for more details. +;; +;; You should have received a copy of the GNU General Public License +;; along with this program; if not, write to the Free Software +;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +#include <linux/linkage.h> + + .text + +ENTRY(__c6xabi_strasgi) + ;; This is essentially memcpy, with alignment known to be at least + ;; 4, and the size a multiple of 4 greater than or equal to 28. + ldw .d2t1 *B4++, A0 +|| mvk .s2 16, B1 + ldw .d2t1 *B4++, A1 +|| mvk .s2 20, B2 +|| sub .d1 A6, 24, A6 + ldw .d2t1 *B4++, A5 + ldw .d2t1 *B4++, A7 +|| mv .l2x A6, B7 + ldw .d2t1 *B4++, A8 + ldw .d2t1 *B4++, A9 +|| mv .s2x A0, B5 +|| cmpltu .l2 B2, B7, B0 + +_strasgi_loop: + stw .d1t2 B5, *A4++ +|| [B0] ldw .d2t1 *B4++, A0 +|| mv .s2x A1, B5 +|| mv .l2 B7, B6 + + [B0] sub .d2 B6, 24, B7 +|| [B0] b .s2 _strasgi_loop +|| cmpltu .l2 B1, B6, B0 + + [B0] ldw .d2t1 *B4++, A1 +|| stw .d1t2 B5, *A4++ +|| mv .s2x A5, B5 +|| cmpltu .l2 12, B6, B0 + + [B0] ldw .d2t1 *B4++, A5 +|| stw .d1t2 B5, *A4++ +|| mv .s2x A7, B5 +|| cmpltu .l2 8, B6, B0 + + [B0] ldw .d2t1 *B4++, A7 +|| stw .d1t2 B5, *A4++ +|| mv .s2x A8, B5 +|| cmpltu .l2 4, B6, B0 + + [B0] ldw .d2t1 *B4++, A8 +|| stw .d1t2 B5, *A4++ +|| mv .s2x A9, B5 +|| cmpltu .l2 0, B6, B0 + + [B0] ldw .d2t1 *B4++, A9 +|| stw .d1t2 B5, *A4++ +|| mv .s2x A0, B5 +|| cmpltu .l2 B2, B7, B0 + + ;; loop back branch happens here + + cmpltu .l2 B1, B6, B0 +|| ret .s2 b3 + + [B0] stw .d1t1 A1, *A4++ +|| cmpltu .l2 12, B6, B0 + [B0] stw .d1t1 A5, *A4++ +|| cmpltu .l2 8, B6, B0 + [B0] stw .d1t1 A7, *A4++ +|| cmpltu .l2 4, B6, B0 + [B0] stw .d1t1 A8, *A4++ +|| cmpltu .l2 0, B6, B0 + [B0] stw .d1t1 A9, *A4++ + + ;; return happens here +ENDPROC(__c6xabi_strasgi) diff --git a/arch/c6x/lib/strasgi_64plus.S b/arch/c6x/lib/strasgi_64plus.S new file mode 100644 index 000000000000..c9fd159b5fa2 --- /dev/null +++ b/arch/c6x/lib/strasgi_64plus.S @@ -0,0 +1,39 @@ +;; Copyright 2010 Free Software Foundation, Inc. +;; Contributed by Bernd Schmidt <bernds@codesourcery.com>. +;; +;; This program is free software; you can redistribute it and/or modify +;; it under the terms of the GNU General Public License as published by +;; the Free Software Foundation; either version 2 of the License, or +;; (at your option) any later version. +;; +;; This program is distributed in the hope that it will be useful, +;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;; GNU General Public License for more details. +;; +;; You should have received a copy of the GNU General Public License +;; along with this program; if not, write to the Free Software +;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +#include <linux/linkage.h> + + .text + +ENTRY(__c6xabi_strasgi_64plus) + shru .s2x a6, 2, b31 +|| mv .s1 a4, a30 +|| mv .d2 b4, b30 + + add .s2 -4, b31, b31 + + sploopd 1 +|| mvc .s2 b31, ilc + ldw .d2t2 *b30++, b31 + nop 4 + mv .s1x b31,a31 + spkernel 6, 0 +|| stw .d1t1 a31, *a30++ + + ret .s2 b3 + nop 5 +ENDPROC(__c6xabi_strasgi_64plus) diff --git a/arch/c6x/mm/Makefile b/arch/c6x/mm/Makefile new file mode 100644 index 000000000000..136a97576c61 --- /dev/null +++ b/arch/c6x/mm/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the linux c6x-specific parts of the memory manager. +# + +obj-y := init.o dma-coherent.o diff --git a/arch/c6x/mm/dma-coherent.c b/arch/c6x/mm/dma-coherent.c new file mode 100644 index 000000000000..4187e5180373 --- /dev/null +++ b/arch/c6x/mm/dma-coherent.c @@ -0,0 +1,143 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot <aurelien.jacquiot@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * DMA uncached mapping support. + * + * Using code pulled from ARM + * Copyright (C) 2000-2004 Russell King + * + */ +#include <linux/slab.h> +#include <linux/bitmap.h> +#include <linux/bitops.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/memblock.h> + +#include <asm/page.h> + +/* + * DMA coherent memory management, can be redefined using the memdma= + * kernel command line + */ + +/* none by default */ +static phys_addr_t dma_base; +static u32 dma_size; +static u32 dma_pages; + +static unsigned long *dma_bitmap; + +/* bitmap lock */ +static DEFINE_SPINLOCK(dma_lock); + +/* + * Return a DMA coherent and contiguous memory chunk from the DMA memory + */ +static inline u32 __alloc_dma_pages(int order) +{ + unsigned long flags; + u32 pos; + + spin_lock_irqsave(&dma_lock, flags); + pos = bitmap_find_free_region(dma_bitmap, dma_pages, order); + spin_unlock_irqrestore(&dma_lock, flags); + + return dma_base + (pos << PAGE_SHIFT); +} + +static void __free_dma_pages(u32 addr, int order) +{ + unsigned long flags; + u32 pos = (addr - dma_base) >> PAGE_SHIFT; + + if (addr < dma_base || (pos + (1 << order)) >= dma_pages) { + printk(KERN_ERR "%s: freeing outside range.\n", __func__); + BUG(); + } + + spin_lock_irqsave(&dma_lock, flags); + bitmap_release_region(dma_bitmap, pos, order); + spin_unlock_irqrestore(&dma_lock, flags); +} + +/* + * Allocate DMA coherent memory space and return both the kernel + * virtual and DMA address for that space. + */ +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *handle, gfp_t gfp) +{ + u32 paddr; + int order; + + if (!dma_size || !size) + return NULL; + + order = get_count_order(((size - 1) >> PAGE_SHIFT) + 1); + + paddr = __alloc_dma_pages(order); + + if (handle) + *handle = paddr; + + if (!paddr) + return NULL; + + return phys_to_virt(paddr); +} +EXPORT_SYMBOL(dma_alloc_coherent); + +/* + * Free DMA coherent memory as defined by the above mapping. + */ +void dma_free_coherent(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_handle) +{ + int order; + + if (!dma_size || !size) + return; + + order = get_count_order(((size - 1) >> PAGE_SHIFT) + 1); + + __free_dma_pages(virt_to_phys(vaddr), order); +} +EXPORT_SYMBOL(dma_free_coherent); + +/* + * Initialise the coherent DMA memory allocator using the given uncached region. + */ +void __init coherent_mem_init(phys_addr_t start, u32 size) +{ + phys_addr_t bitmap_phys; + + if (!size) + return; + + printk(KERN_INFO + "Coherent memory (DMA) region start=0x%x size=0x%x\n", + start, size); + + dma_base = start; + dma_size = size; + + /* allocate bitmap */ + dma_pages = dma_size >> PAGE_SHIFT; + if (dma_size & (PAGE_SIZE - 1)) + ++dma_pages; + + bitmap_phys = memblock_alloc(BITS_TO_LONGS(dma_pages) * sizeof(long), + sizeof(long)); + + dma_bitmap = phys_to_virt(bitmap_phys); + memset(dma_bitmap, 0, dma_pages * PAGE_SIZE); +} diff --git a/arch/c6x/mm/init.c b/arch/c6x/mm/init.c new file mode 100644 index 000000000000..89395f09648a --- /dev/null +++ b/arch/c6x/mm/init.c @@ -0,0 +1,113 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010, 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/mm.h> +#include <linux/swap.h> +#include <linux/module.h> +#include <linux/bootmem.h> +#ifdef CONFIG_BLK_DEV_RAM +#include <linux/blkdev.h> +#endif +#include <linux/initrd.h> + +#include <asm/sections.h> + +/* + * ZERO_PAGE is a special page that is used for zero-initialized + * data and COW. + */ +unsigned long empty_zero_page; +EXPORT_SYMBOL(empty_zero_page); + +/* + * paging_init() continues the virtual memory environment setup which + * was begun by the code in arch/head.S. + * The parameters are pointers to where to stick the starting and ending + * addresses of available kernel virtual memory. + */ +void __init paging_init(void) +{ + struct pglist_data *pgdat = NODE_DATA(0); + unsigned long zones_size[MAX_NR_ZONES] = {0, }; + + empty_zero_page = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); + memset((void *)empty_zero_page, 0, PAGE_SIZE); + + /* + * Set up user data space + */ + set_fs(KERNEL_DS); + + /* + * Define zones + */ + zones_size[ZONE_NORMAL] = (memory_end - PAGE_OFFSET) >> PAGE_SHIFT; + pgdat->node_zones[ZONE_NORMAL].zone_start_pfn = + __pa(PAGE_OFFSET) >> PAGE_SHIFT; + + free_area_init(zones_size); +} + +void __init mem_init(void) +{ + int codek, datak; + unsigned long tmp; + unsigned long len = memory_end - memory_start; + + high_memory = (void *)(memory_end & PAGE_MASK); + + /* this will put all memory onto the freelists */ + totalram_pages = free_all_bootmem(); + + codek = (_etext - _stext) >> 10; + datak = (_end - _sdata) >> 10; + + tmp = nr_free_pages() << PAGE_SHIFT; + printk(KERN_INFO "Memory: %luk/%luk RAM (%dk kernel code, %dk data)\n", + tmp >> 10, len >> 10, codek, datak); +} + +#ifdef CONFIG_BLK_DEV_INITRD +void __init free_initrd_mem(unsigned long start, unsigned long end) +{ + int pages = 0; + for (; start < end; start += PAGE_SIZE) { + ClearPageReserved(virt_to_page(start)); + init_page_count(virt_to_page(start)); + free_page(start); + totalram_pages++; + pages++; + } + printk(KERN_INFO "Freeing initrd memory: %luk freed\n", + (pages * PAGE_SIZE) >> 10); +} +#endif + +void __init free_initmem(void) +{ + unsigned long addr; + + /* + * The following code should be cool even if these sections + * are not page aligned. + */ + addr = PAGE_ALIGN((unsigned long)(__init_begin)); + + /* next to check that the page we free is not a partial page */ + for (; addr + PAGE_SIZE < (unsigned long)(__init_end); + addr += PAGE_SIZE) { + ClearPageReserved(virt_to_page(addr)); + init_page_count(virt_to_page(addr)); + free_page(addr); + totalram_pages++; + } + printk(KERN_INFO "Freeing unused kernel memory: %dK freed\n", + (int) ((addr - PAGE_ALIGN((long) &__init_begin)) >> 10)); +} diff --git a/arch/c6x/platforms/Kconfig b/arch/c6x/platforms/Kconfig new file mode 100644 index 000000000000..401ee678fd01 --- /dev/null +++ b/arch/c6x/platforms/Kconfig @@ -0,0 +1,16 @@ + +config SOC_TMS320C6455 + bool "TMS320C6455" + default n + +config SOC_TMS320C6457 + bool "TMS320C6457" + default n + +config SOC_TMS320C6472 + bool "TMS320C6472" + default n + +config SOC_TMS320C6474 + bool "TMS320C6474" + default n diff --git a/arch/c6x/platforms/Makefile b/arch/c6x/platforms/Makefile new file mode 100644 index 000000000000..9a95b9bca8d0 --- /dev/null +++ b/arch/c6x/platforms/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for arch/c6x/platforms +# +# Copyright 2010, 2011 Texas Instruments Incorporated +# + +obj-y = platform.o cache.o megamod-pic.o pll.o plldata.o timer64.o +obj-y += dscr.o + +# SoC objects +obj-$(CONFIG_SOC_TMS320C6455) += emif.o +obj-$(CONFIG_SOC_TMS320C6457) += emif.o diff --git a/arch/c6x/platforms/cache.c b/arch/c6x/platforms/cache.c new file mode 100644 index 000000000000..86318a16a252 --- /dev/null +++ b/arch/c6x/platforms/cache.c @@ -0,0 +1,445 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated + * Author: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/io.h> + +#include <asm/cache.h> +#include <asm/soc.h> + +/* + * Internal Memory Control Registers for caches + */ +#define IMCR_CCFG 0x0000 +#define IMCR_L1PCFG 0x0020 +#define IMCR_L1PCC 0x0024 +#define IMCR_L1DCFG 0x0040 +#define IMCR_L1DCC 0x0044 +#define IMCR_L2ALLOC0 0x2000 +#define IMCR_L2ALLOC1 0x2004 +#define IMCR_L2ALLOC2 0x2008 +#define IMCR_L2ALLOC3 0x200c +#define IMCR_L2WBAR 0x4000 +#define IMCR_L2WWC 0x4004 +#define IMCR_L2WIBAR 0x4010 +#define IMCR_L2WIWC 0x4014 +#define IMCR_L2IBAR 0x4018 +#define IMCR_L2IWC 0x401c +#define IMCR_L1PIBAR 0x4020 +#define IMCR_L1PIWC 0x4024 +#define IMCR_L1DWIBAR 0x4030 +#define IMCR_L1DWIWC 0x4034 +#define IMCR_L1DWBAR 0x4040 +#define IMCR_L1DWWC 0x4044 +#define IMCR_L1DIBAR 0x4048 +#define IMCR_L1DIWC 0x404c +#define IMCR_L2WB 0x5000 +#define IMCR_L2WBINV 0x5004 +#define IMCR_L2INV 0x5008 +#define IMCR_L1PINV 0x5028 +#define IMCR_L1DWB 0x5040 +#define IMCR_L1DWBINV 0x5044 +#define IMCR_L1DINV 0x5048 +#define IMCR_MAR_BASE 0x8000 +#define IMCR_MAR96_111 0x8180 +#define IMCR_MAR128_191 0x8200 +#define IMCR_MAR224_239 0x8380 +#define IMCR_L2MPFAR 0xa000 +#define IMCR_L2MPFSR 0xa004 +#define IMCR_L2MPFCR 0xa008 +#define IMCR_L2MPLK0 0xa100 +#define IMCR_L2MPLK1 0xa104 +#define IMCR_L2MPLK2 0xa108 +#define IMCR_L2MPLK3 0xa10c +#define IMCR_L2MPLKCMD 0xa110 +#define IMCR_L2MPLKSTAT 0xa114 +#define IMCR_L2MPPA_BASE 0xa200 +#define IMCR_L1PMPFAR 0xa400 +#define IMCR_L1PMPFSR 0xa404 +#define IMCR_L1PMPFCR 0xa408 +#define IMCR_L1PMPLK0 0xa500 +#define IMCR_L1PMPLK1 0xa504 +#define IMCR_L1PMPLK2 0xa508 +#define IMCR_L1PMPLK3 0xa50c +#define IMCR_L1PMPLKCMD 0xa510 +#define IMCR_L1PMPLKSTAT 0xa514 +#define IMCR_L1PMPPA_BASE 0xa600 +#define IMCR_L1DMPFAR 0xac00 +#define IMCR_L1DMPFSR 0xac04 +#define IMCR_L1DMPFCR 0xac08 +#define IMCR_L1DMPLK0 0xad00 +#define IMCR_L1DMPLK1 0xad04 +#define IMCR_L1DMPLK2 0xad08 +#define IMCR_L1DMPLK3 0xad0c +#define IMCR_L1DMPLKCMD 0xad10 +#define IMCR_L1DMPLKSTAT 0xad14 +#define IMCR_L1DMPPA_BASE 0xae00 +#define IMCR_L2PDWAKE0 0xc040 +#define IMCR_L2PDWAKE1 0xc044 +#define IMCR_L2PDSLEEP0 0xc050 +#define IMCR_L2PDSLEEP1 0xc054 +#define IMCR_L2PDSTAT0 0xc060 +#define IMCR_L2PDSTAT1 0xc064 + +/* + * CCFG register values and bits + */ +#define L2MODE_0K_CACHE 0x0 +#define L2MODE_32K_CACHE 0x1 +#define L2MODE_64K_CACHE 0x2 +#define L2MODE_128K_CACHE 0x3 +#define L2MODE_256K_CACHE 0x7 + +#define L2PRIO_URGENT 0x0 +#define L2PRIO_HIGH 0x1 +#define L2PRIO_MEDIUM 0x2 +#define L2PRIO_LOW 0x3 + +#define CCFG_ID 0x100 /* Invalidate L1P bit */ +#define CCFG_IP 0x200 /* Invalidate L1D bit */ + +static void __iomem *cache_base; + +/* + * L1 & L2 caches generic functions + */ +#define imcr_get(reg) soc_readl(cache_base + (reg)) +#define imcr_set(reg, value) \ +do { \ + soc_writel((value), cache_base + (reg)); \ + soc_readl(cache_base + (reg)); \ +} while (0) + +static void cache_block_operation_wait(unsigned int wc_reg) +{ + /* Wait for completion */ + while (imcr_get(wc_reg)) + cpu_relax(); +} + +static DEFINE_SPINLOCK(cache_lock); + +/* + * Generic function to perform a block cache operation as + * invalidate or writeback/invalidate + */ +static void cache_block_operation(unsigned int *start, + unsigned int *end, + unsigned int bar_reg, + unsigned int wc_reg) +{ + unsigned long flags; + unsigned int wcnt = + (L2_CACHE_ALIGN_CNT((unsigned int) end) + - L2_CACHE_ALIGN_LOW((unsigned int) start)) >> 2; + unsigned int wc = 0; + + for (; wcnt; wcnt -= wc, start += wc) { +loop: + spin_lock_irqsave(&cache_lock, flags); + + /* + * If another cache operation is occuring + */ + if (unlikely(imcr_get(wc_reg))) { + spin_unlock_irqrestore(&cache_lock, flags); + + /* Wait for previous operation completion */ + cache_block_operation_wait(wc_reg); + + /* Try again */ + goto loop; + } + + imcr_set(bar_reg, L2_CACHE_ALIGN_LOW((unsigned int) start)); + + if (wcnt > 0xffff) + wc = 0xffff; + else + wc = wcnt; + + /* Set word count value in the WC register */ + imcr_set(wc_reg, wc & 0xffff); + + spin_unlock_irqrestore(&cache_lock, flags); + + /* Wait for completion */ + cache_block_operation_wait(wc_reg); + } +} + +static void cache_block_operation_nowait(unsigned int *start, + unsigned int *end, + unsigned int bar_reg, + unsigned int wc_reg) +{ + unsigned long flags; + unsigned int wcnt = + (L2_CACHE_ALIGN_CNT((unsigned int) end) + - L2_CACHE_ALIGN_LOW((unsigned int) start)) >> 2; + unsigned int wc = 0; + + for (; wcnt; wcnt -= wc, start += wc) { + + spin_lock_irqsave(&cache_lock, flags); + + imcr_set(bar_reg, L2_CACHE_ALIGN_LOW((unsigned int) start)); + + if (wcnt > 0xffff) + wc = 0xffff; + else + wc = wcnt; + + /* Set word count value in the WC register */ + imcr_set(wc_reg, wc & 0xffff); + + spin_unlock_irqrestore(&cache_lock, flags); + + /* Don't wait for completion on last cache operation */ + if (wcnt > 0xffff) + cache_block_operation_wait(wc_reg); + } +} + +/* + * L1 caches management + */ + +/* + * Disable L1 caches + */ +void L1_cache_off(void) +{ + unsigned int dummy; + + imcr_set(IMCR_L1PCFG, 0); + dummy = imcr_get(IMCR_L1PCFG); + + imcr_set(IMCR_L1DCFG, 0); + dummy = imcr_get(IMCR_L1DCFG); +} + +/* + * Enable L1 caches + */ +void L1_cache_on(void) +{ + unsigned int dummy; + + imcr_set(IMCR_L1PCFG, 7); + dummy = imcr_get(IMCR_L1PCFG); + + imcr_set(IMCR_L1DCFG, 7); + dummy = imcr_get(IMCR_L1DCFG); +} + +/* + * L1P global-invalidate all + */ +void L1P_cache_global_invalidate(void) +{ + unsigned int set = 1; + imcr_set(IMCR_L1PINV, set); + while (imcr_get(IMCR_L1PINV) & 1) + cpu_relax(); +} + +/* + * L1D global-invalidate all + * + * Warning: this operation causes all updated data in L1D to + * be discarded rather than written back to the lower levels of + * memory + */ +void L1D_cache_global_invalidate(void) +{ + unsigned int set = 1; + imcr_set(IMCR_L1DINV, set); + while (imcr_get(IMCR_L1DINV) & 1) + cpu_relax(); +} + +void L1D_cache_global_writeback(void) +{ + unsigned int set = 1; + imcr_set(IMCR_L1DWB, set); + while (imcr_get(IMCR_L1DWB) & 1) + cpu_relax(); +} + +void L1D_cache_global_writeback_invalidate(void) +{ + unsigned int set = 1; + imcr_set(IMCR_L1DWBINV, set); + while (imcr_get(IMCR_L1DWBINV) & 1) + cpu_relax(); +} + +/* + * L2 caches management + */ + +/* + * Set L2 operation mode + */ +void L2_cache_set_mode(unsigned int mode) +{ + unsigned int ccfg = imcr_get(IMCR_CCFG); + + /* Clear and set the L2MODE bits in CCFG */ + ccfg &= ~7; + ccfg |= (mode & 7); + imcr_set(IMCR_CCFG, ccfg); + ccfg = imcr_get(IMCR_CCFG); +} + +/* + * L2 global-writeback and global-invalidate all + */ +void L2_cache_global_writeback_invalidate(void) +{ + imcr_set(IMCR_L2WBINV, 1); + while (imcr_get(IMCR_L2WBINV)) + cpu_relax(); +} + +/* + * L2 global-writeback all + */ +void L2_cache_global_writeback(void) +{ + imcr_set(IMCR_L2WB, 1); + while (imcr_get(IMCR_L2WB)) + cpu_relax(); +} + +/* + * Cacheability controls + */ +void enable_caching(unsigned long start, unsigned long end) +{ + unsigned int mar = IMCR_MAR_BASE + ((start >> 24) << 2); + unsigned int mar_e = IMCR_MAR_BASE + ((end >> 24) << 2); + + for (; mar <= mar_e; mar += 4) + imcr_set(mar, imcr_get(mar) | 1); +} + +void disable_caching(unsigned long start, unsigned long end) +{ + unsigned int mar = IMCR_MAR_BASE + ((start >> 24) << 2); + unsigned int mar_e = IMCR_MAR_BASE + ((end >> 24) << 2); + + for (; mar <= mar_e; mar += 4) + imcr_set(mar, imcr_get(mar) & ~1); +} + + +/* + * L1 block operations + */ +void L1P_cache_block_invalidate(unsigned int start, unsigned int end) +{ + cache_block_operation((unsigned int *) start, + (unsigned int *) end, + IMCR_L1PIBAR, IMCR_L1PIWC); +} + +void L1D_cache_block_invalidate(unsigned int start, unsigned int end) +{ + cache_block_operation((unsigned int *) start, + (unsigned int *) end, + IMCR_L1DIBAR, IMCR_L1DIWC); +} + +void L1D_cache_block_writeback_invalidate(unsigned int start, unsigned int end) +{ + cache_block_operation((unsigned int *) start, + (unsigned int *) end, + IMCR_L1DWIBAR, IMCR_L1DWIWC); +} + +void L1D_cache_block_writeback(unsigned int start, unsigned int end) +{ + cache_block_operation((unsigned int *) start, + (unsigned int *) end, + IMCR_L1DWBAR, IMCR_L1DWWC); +} + +/* + * L2 block operations + */ +void L2_cache_block_invalidate(unsigned int start, unsigned int end) +{ + cache_block_operation((unsigned int *) start, + (unsigned int *) end, + IMCR_L2IBAR, IMCR_L2IWC); +} + +void L2_cache_block_writeback(unsigned int start, unsigned int end) +{ + cache_block_operation((unsigned int *) start, + (unsigned int *) end, + IMCR_L2WBAR, IMCR_L2WWC); +} + +void L2_cache_block_writeback_invalidate(unsigned int start, unsigned int end) +{ + cache_block_operation((unsigned int *) start, + (unsigned int *) end, + IMCR_L2WIBAR, IMCR_L2WIWC); +} + +void L2_cache_block_invalidate_nowait(unsigned int start, unsigned int end) +{ + cache_block_operation_nowait((unsigned int *) start, + (unsigned int *) end, + IMCR_L2IBAR, IMCR_L2IWC); +} + +void L2_cache_block_writeback_nowait(unsigned int start, unsigned int end) +{ + cache_block_operation_nowait((unsigned int *) start, + (unsigned int *) end, + IMCR_L2WBAR, IMCR_L2WWC); +} + +void L2_cache_block_writeback_invalidate_nowait(unsigned int start, + unsigned int end) +{ + cache_block_operation_nowait((unsigned int *) start, + (unsigned int *) end, + IMCR_L2WIBAR, IMCR_L2WIWC); +} + + +/* + * L1 and L2 caches configuration + */ +void __init c6x_cache_init(void) +{ + struct device_node *node; + + node = of_find_compatible_node(NULL, NULL, "ti,c64x+cache"); + if (!node) + return; + + cache_base = of_iomap(node, 0); + + of_node_put(node); + + if (!cache_base) + return; + + /* Set L2 caches on the the whole L2 SRAM memory */ + L2_cache_set_mode(L2MODE_SIZE); + + /* Enable L1 */ + L1_cache_on(); +} diff --git a/arch/c6x/platforms/dscr.c b/arch/c6x/platforms/dscr.c new file mode 100644 index 000000000000..f848a65ee646 --- /dev/null +++ b/arch/c6x/platforms/dscr.c @@ -0,0 +1,598 @@ +/* + * Device State Control Registers driver + * + * Copyright (C) 2011 Texas Instruments Incorporated + * Author: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * The Device State Control Registers (DSCR) provide SoC level control over + * a number of peripherals. Details vary considerably among the various SoC + * parts. In general, the DSCR block will provide one or more configuration + * registers often protected by a lock register. One or more key values must + * be written to a lock register in order to unlock the configuration register. + * The configuration register may be used to enable (and disable in some + * cases) SoC pin drivers, peripheral clock sources (internal or pin), etc. + * In some cases, a configuration register is write once or the individual + * bits are write once. That is, you may be able to enable a device, but + * will not be able to disable it. + * + * In addition to device configuration, the DSCR block may provide registers + * which are used to reset SoC peripherals, provide device ID information, + * provide MAC addresses, and other miscellaneous functions. + */ + +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <asm/soc.h> +#include <asm/dscr.h> + +#define MAX_DEVSTATE_IDS 32 +#define MAX_DEVCTL_REGS 8 +#define MAX_DEVSTAT_REGS 8 +#define MAX_LOCKED_REGS 4 +#define MAX_SOC_EMACS 2 + +struct rmii_reset_reg { + u32 reg; + u32 mask; +}; + +/* + * Some registerd may be locked. In order to write to these + * registers, the key value must first be written to the lockreg. + */ +struct locked_reg { + u32 reg; /* offset from base */ + u32 lockreg; /* offset from base */ + u32 key; /* unlock key */ +}; + +/* + * This describes a contiguous area of like control bits used to enable/disable + * SoC devices. Each controllable device is given an ID which is used by the + * individual device drivers to control the device state. These IDs start at + * zero and are assigned sequentially to the control bitfield ranges described + * by this structure. + */ +struct devstate_ctl_reg { + u32 reg; /* register holding the control bits */ + u8 start_id; /* start id of this range */ + u8 num_ids; /* number of devices in this range */ + u8 enable_only; /* bits are write-once to enable only */ + u8 enable; /* value used to enable device */ + u8 disable; /* value used to disable device */ + u8 shift; /* starting (rightmost) bit in range */ + u8 nbits; /* number of bits per device */ +}; + + +/* + * This describes a region of status bits indicating the state of + * various devices. This is used internally to wait for status + * change completion when enabling/disabling a device. Status is + * optional and not all device controls will have a corresponding + * status. + */ +struct devstate_stat_reg { + u32 reg; /* register holding the status bits */ + u8 start_id; /* start id of this range */ + u8 num_ids; /* number of devices in this range */ + u8 enable; /* value indicating enabled state */ + u8 disable; /* value indicating disabled state */ + u8 shift; /* starting (rightmost) bit in range */ + u8 nbits; /* number of bits per device */ +}; + +struct devstate_info { + struct devstate_ctl_reg *ctl; + struct devstate_stat_reg *stat; +}; + +/* These are callbacks to SOC-specific code. */ +struct dscr_ops { + void (*init)(struct device_node *node); +}; + +struct dscr_regs { + spinlock_t lock; + void __iomem *base; + u32 kick_reg[2]; + u32 kick_key[2]; + struct locked_reg locked[MAX_LOCKED_REGS]; + struct devstate_info devstate_info[MAX_DEVSTATE_IDS]; + struct rmii_reset_reg rmii_resets[MAX_SOC_EMACS]; + struct devstate_ctl_reg devctl[MAX_DEVCTL_REGS]; + struct devstate_stat_reg devstat[MAX_DEVSTAT_REGS]; +}; + +static struct dscr_regs dscr; + +static struct locked_reg *find_locked_reg(u32 reg) +{ + int i; + + for (i = 0; i < MAX_LOCKED_REGS; i++) + if (dscr.locked[i].key && reg == dscr.locked[i].reg) + return &dscr.locked[i]; + return NULL; +} + +/* + * Write to a register with one lock + */ +static void dscr_write_locked1(u32 reg, u32 val, + u32 lock, u32 key) +{ + void __iomem *reg_addr = dscr.base + reg; + void __iomem *lock_addr = dscr.base + lock; + + /* + * For some registers, the lock is relocked after a short number + * of cycles. We have to put the lock write and register write in + * the same fetch packet to meet this timing. The .align ensures + * the two stw instructions are in the same fetch packet. + */ + asm volatile ("b .s2 0f\n" + "nop 5\n" + " .align 5\n" + "0:\n" + "stw .D1T2 %3,*%2\n" + "stw .D1T2 %1,*%0\n" + : + : "a"(reg_addr), "b"(val), "a"(lock_addr), "b"(key) + ); + + /* in case the hw doesn't reset the lock */ + soc_writel(0, lock_addr); +} + +/* + * Write to a register protected by two lock registers + */ +static void dscr_write_locked2(u32 reg, u32 val, + u32 lock0, u32 key0, + u32 lock1, u32 key1) +{ + soc_writel(key0, dscr.base + lock0); + soc_writel(key1, dscr.base + lock1); + soc_writel(val, dscr.base + reg); + soc_writel(0, dscr.base + lock0); + soc_writel(0, dscr.base + lock1); +} + +static void dscr_write(u32 reg, u32 val) +{ + struct locked_reg *lock; + + lock = find_locked_reg(reg); + if (lock) + dscr_write_locked1(reg, val, lock->lockreg, lock->key); + else if (dscr.kick_key[0]) + dscr_write_locked2(reg, val, dscr.kick_reg[0], dscr.kick_key[0], + dscr.kick_reg[1], dscr.kick_key[1]); + else + soc_writel(val, dscr.base + reg); +} + + +/* + * Drivers can use this interface to enable/disable SoC IP blocks. + */ +void dscr_set_devstate(int id, enum dscr_devstate_t state) +{ + struct devstate_ctl_reg *ctl; + struct devstate_stat_reg *stat; + struct devstate_info *info; + u32 ctl_val, val; + int ctl_shift, ctl_mask; + unsigned long flags; + + if (!dscr.base) + return; + + if (id < 0 || id >= MAX_DEVSTATE_IDS) + return; + + info = &dscr.devstate_info[id]; + ctl = info->ctl; + stat = info->stat; + + if (ctl == NULL) + return; + + ctl_shift = ctl->shift + ctl->nbits * (id - ctl->start_id); + ctl_mask = ((1 << ctl->nbits) - 1) << ctl_shift; + + switch (state) { + case DSCR_DEVSTATE_ENABLED: + ctl_val = ctl->enable << ctl_shift; + break; + case DSCR_DEVSTATE_DISABLED: + if (ctl->enable_only) + return; + ctl_val = ctl->disable << ctl_shift; + break; + default: + return; + } + + spin_lock_irqsave(&dscr.lock, flags); + + val = soc_readl(dscr.base + ctl->reg); + val &= ~ctl_mask; + val |= ctl_val; + + dscr_write(ctl->reg, val); + + spin_unlock_irqrestore(&dscr.lock, flags); + + if (!stat) + return; + + ctl_shift = stat->shift + stat->nbits * (id - stat->start_id); + + if (state == DSCR_DEVSTATE_ENABLED) + ctl_val = stat->enable; + else + ctl_val = stat->disable; + + do { + val = soc_readl(dscr.base + stat->reg); + val >>= ctl_shift; + val &= ((1 << stat->nbits) - 1); + } while (val != ctl_val); +} +EXPORT_SYMBOL(dscr_set_devstate); + +/* + * Drivers can use this to reset RMII module. + */ +void dscr_rmii_reset(int id, int assert) +{ + struct rmii_reset_reg *r; + unsigned long flags; + u32 val; + + if (id < 0 || id >= MAX_SOC_EMACS) + return; + + r = &dscr.rmii_resets[id]; + if (r->mask == 0) + return; + + spin_lock_irqsave(&dscr.lock, flags); + + val = soc_readl(dscr.base + r->reg); + if (assert) + dscr_write(r->reg, val | r->mask); + else + dscr_write(r->reg, val & ~(r->mask)); + + spin_unlock_irqrestore(&dscr.lock, flags); +} +EXPORT_SYMBOL(dscr_rmii_reset); + +static void __init dscr_parse_devstat(struct device_node *node, + void __iomem *base) +{ + u32 val; + int err; + + err = of_property_read_u32_array(node, "ti,dscr-devstat", &val, 1); + if (!err) + c6x_devstat = soc_readl(base + val); + printk(KERN_INFO "DEVSTAT: %08x\n", c6x_devstat); +} + +static void __init dscr_parse_silicon_rev(struct device_node *node, + void __iomem *base) +{ + u32 vals[3]; + int err; + + err = of_property_read_u32_array(node, "ti,dscr-silicon-rev", vals, 3); + if (!err) { + c6x_silicon_rev = soc_readl(base + vals[0]); + c6x_silicon_rev >>= vals[1]; + c6x_silicon_rev &= vals[2]; + } +} + +/* + * Some SoCs will have a pair of fuse registers which hold + * an ethernet MAC address. The "ti,dscr-mac-fuse-regs" + * property is a mapping from fuse register bytes to MAC + * address bytes. The expected format is: + * + * ti,dscr-mac-fuse-regs = <reg0 b3 b2 b1 b0 + * reg1 b3 b2 b1 b0> + * + * reg0 and reg1 are the offsets of the two fuse registers. + * b3-b0 positionally represent bytes within the fuse register. + * b3 is the most significant byte and b0 is the least. + * Allowable values for b3-b0 are: + * + * 0 = fuse register byte not used in MAC address + * 1-6 = index+1 into c6x_fuse_mac[] + */ +static void __init dscr_parse_mac_fuse(struct device_node *node, + void __iomem *base) +{ + u32 vals[10], fuse; + int f, i, j, err; + + err = of_property_read_u32_array(node, "ti,dscr-mac-fuse-regs", + vals, 10); + if (err) + return; + + for (f = 0; f < 2; f++) { + fuse = soc_readl(base + vals[f * 5]); + for (j = (f * 5) + 1, i = 24; i >= 0; i -= 8, j++) + if (vals[j] && vals[j] <= 6) + c6x_fuse_mac[vals[j] - 1] = fuse >> i; + } +} + +static void __init dscr_parse_rmii_resets(struct device_node *node, + void __iomem *base) +{ + const __be32 *p; + int i, size; + + /* look for RMII reset registers */ + p = of_get_property(node, "ti,dscr-rmii-resets", &size); + if (p) { + /* parse all the reg/mask pairs we can handle */ + size /= (sizeof(*p) * 2); + if (size > MAX_SOC_EMACS) + size = MAX_SOC_EMACS; + + for (i = 0; i < size; i++) { + dscr.rmii_resets[i].reg = be32_to_cpup(p++); + dscr.rmii_resets[i].mask = be32_to_cpup(p++); + } + } +} + + +static void __init dscr_parse_privperm(struct device_node *node, + void __iomem *base) +{ + u32 vals[2]; + int err; + + err = of_property_read_u32_array(node, "ti,dscr-privperm", vals, 2); + if (err) + return; + dscr_write(vals[0], vals[1]); +} + +/* + * SoCs may have "locked" DSCR registers which can only be written + * to only after writing a key value to a lock registers. These + * regisers can be described with the "ti,dscr-locked-regs" property. + * This property provides a list of register descriptions with each + * description consisting of three values. + * + * ti,dscr-locked-regs = <reg0 lockreg0 key0 + * ... + * regN lockregN keyN>; + * + * reg is the offset of the locked register + * lockreg is the offset of the lock register + * key is the unlock key written to lockreg + * + */ +static void __init dscr_parse_locked_regs(struct device_node *node, + void __iomem *base) +{ + struct locked_reg *r; + const __be32 *p; + int i, size; + + p = of_get_property(node, "ti,dscr-locked-regs", &size); + if (p) { + /* parse all the register descriptions we can handle */ + size /= (sizeof(*p) * 3); + if (size > MAX_LOCKED_REGS) + size = MAX_LOCKED_REGS; + + for (i = 0; i < size; i++) { + r = &dscr.locked[i]; + + r->reg = be32_to_cpup(p++); + r->lockreg = be32_to_cpup(p++); + r->key = be32_to_cpup(p++); + } + } +} + +/* + * SoCs may have DSCR registers which are only write enabled after + * writing specific key values to two registers. The two key registers + * and the key values can be parsed from a "ti,dscr-kick-regs" + * propety with the following layout: + * + * ti,dscr-kick-regs = <kickreg0 key0 kickreg1 key1> + * + * kickreg is the offset of the "kick" register + * key is the value which unlocks writing for protected regs + */ +static void __init dscr_parse_kick_regs(struct device_node *node, + void __iomem *base) +{ + u32 vals[4]; + int err; + + err = of_property_read_u32_array(node, "ti,dscr-kick-regs", vals, 4); + if (!err) { + dscr.kick_reg[0] = vals[0]; + dscr.kick_key[0] = vals[1]; + dscr.kick_reg[1] = vals[2]; + dscr.kick_key[1] = vals[3]; + } +} + + +/* + * SoCs may provide controls to enable/disable individual IP blocks. These + * controls in the DSCR usually control pin drivers but also may control + * clocking and or resets. The device tree is used to describe the bitfields + * in registers used to control device state. The number of bits and their + * values may vary even within the same register. + * + * The layout of these bitfields is described by the ti,dscr-devstate-ctl-regs + * property. This property is a list where each element describes a contiguous + * range of control fields with like properties. Each element of the list + * consists of 7 cells with the following values: + * + * start_id num_ids reg enable disable start_bit nbits + * + * start_id is device id for the first device control in the range + * num_ids is the number of device controls in the range + * reg is the offset of the register holding the control bits + * enable is the value to enable a device + * disable is the value to disable a device (0xffffffff if cannot disable) + * start_bit is the bit number of the first bit in the range + * nbits is the number of bits per device control + */ +static void __init dscr_parse_devstate_ctl_regs(struct device_node *node, + void __iomem *base) +{ + struct devstate_ctl_reg *r; + const __be32 *p; + int i, j, size; + + p = of_get_property(node, "ti,dscr-devstate-ctl-regs", &size); + if (p) { + /* parse all the ranges we can handle */ + size /= (sizeof(*p) * 7); + if (size > MAX_DEVCTL_REGS) + size = MAX_DEVCTL_REGS; + + for (i = 0; i < size; i++) { + r = &dscr.devctl[i]; + + r->start_id = be32_to_cpup(p++); + r->num_ids = be32_to_cpup(p++); + r->reg = be32_to_cpup(p++); + r->enable = be32_to_cpup(p++); + r->disable = be32_to_cpup(p++); + if (r->disable == 0xffffffff) + r->enable_only = 1; + r->shift = be32_to_cpup(p++); + r->nbits = be32_to_cpup(p++); + + for (j = r->start_id; + j < (r->start_id + r->num_ids); + j++) + dscr.devstate_info[j].ctl = r; + } + } +} + +/* + * SoCs may provide status registers indicating the state (enabled/disabled) of + * devices on the SoC. The device tree is used to describe the bitfields in + * registers used to provide device status. The number of bits and their + * values used to provide status may vary even within the same register. + * + * The layout of these bitfields is described by the ti,dscr-devstate-stat-regs + * property. This property is a list where each element describes a contiguous + * range of status fields with like properties. Each element of the list + * consists of 7 cells with the following values: + * + * start_id num_ids reg enable disable start_bit nbits + * + * start_id is device id for the first device status in the range + * num_ids is the number of devices covered by the range + * reg is the offset of the register holding the status bits + * enable is the value indicating device is enabled + * disable is the value indicating device is disabled + * start_bit is the bit number of the first bit in the range + * nbits is the number of bits per device status + */ +static void __init dscr_parse_devstate_stat_regs(struct device_node *node, + void __iomem *base) +{ + struct devstate_stat_reg *r; + const __be32 *p; + int i, j, size; + + p = of_get_property(node, "ti,dscr-devstate-stat-regs", &size); + if (p) { + /* parse all the ranges we can handle */ + size /= (sizeof(*p) * 7); + if (size > MAX_DEVSTAT_REGS) + size = MAX_DEVSTAT_REGS; + + for (i = 0; i < size; i++) { + r = &dscr.devstat[i]; + + r->start_id = be32_to_cpup(p++); + r->num_ids = be32_to_cpup(p++); + r->reg = be32_to_cpup(p++); + r->enable = be32_to_cpup(p++); + r->disable = be32_to_cpup(p++); + r->shift = be32_to_cpup(p++); + r->nbits = be32_to_cpup(p++); + + for (j = r->start_id; + j < (r->start_id + r->num_ids); + j++) + dscr.devstate_info[j].stat = r; + } + } +} + +static struct of_device_id dscr_ids[] __initdata = { + { .compatible = "ti,c64x+dscr" }, + {} +}; + +/* + * Probe for DSCR area. + * + * This has to be done early on in case timer or interrupt controller + * needs something. e.g. On C6455 SoC, timer must be enabled through + * DSCR before it is functional. + */ +void __init dscr_probe(void) +{ + struct device_node *node; + void __iomem *base; + + spin_lock_init(&dscr.lock); + + node = of_find_matching_node(NULL, dscr_ids); + if (!node) + return; + + base = of_iomap(node, 0); + if (!base) { + of_node_put(node); + return; + } + + dscr.base = base; + + dscr_parse_devstat(node, base); + dscr_parse_silicon_rev(node, base); + dscr_parse_mac_fuse(node, base); + dscr_parse_rmii_resets(node, base); + dscr_parse_locked_regs(node, base); + dscr_parse_kick_regs(node, base); + dscr_parse_devstate_ctl_regs(node, base); + dscr_parse_devstate_stat_regs(node, base); + dscr_parse_privperm(node, base); +} diff --git a/arch/c6x/platforms/emif.c b/arch/c6x/platforms/emif.c new file mode 100644 index 000000000000..8b564dec241d --- /dev/null +++ b/arch/c6x/platforms/emif.c @@ -0,0 +1,87 @@ +/* + * External Memory Interface + * + * Copyright (C) 2011 Texas Instruments Incorporated + * Author: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/io.h> +#include <asm/soc.h> +#include <asm/dscr.h> + +#define NUM_EMIFA_CHIP_ENABLES 4 + +struct emifa_regs { + u32 midr; + u32 stat; + u32 reserved1[6]; + u32 bprio; + u32 reserved2[23]; + u32 cecfg[NUM_EMIFA_CHIP_ENABLES]; + u32 reserved3[4]; + u32 awcc; + u32 reserved4[7]; + u32 intraw; + u32 intmsk; + u32 intmskset; + u32 intmskclr; +}; + +static struct of_device_id emifa_match[] __initdata = { + { .compatible = "ti,c64x+emifa" }, + {} +}; + +/* + * Parse device tree for existence of an EMIF (External Memory Interface) + * and initialize it if found. + */ +static int __init c6x_emifa_init(void) +{ + struct emifa_regs __iomem *regs; + struct device_node *node; + const __be32 *p; + u32 val; + int i, len, err; + + node = of_find_matching_node(NULL, emifa_match); + if (!node) + return 0; + + regs = of_iomap(node, 0); + if (!regs) + return 0; + + /* look for a dscr-based enable for emifa pin buffers */ + err = of_property_read_u32_array(node, "ti,dscr-dev-enable", &val, 1); + if (!err) + dscr_set_devstate(val, DSCR_DEVSTATE_ENABLED); + + /* set up the chip enables */ + p = of_get_property(node, "ti,emifa-ce-config", &len); + if (p) { + len /= sizeof(u32); + if (len > NUM_EMIFA_CHIP_ENABLES) + len = NUM_EMIFA_CHIP_ENABLES; + for (i = 0; i <= len; i++) + soc_writel(be32_to_cpup(&p[i]), ®s->cecfg[i]); + } + + err = of_property_read_u32_array(node, "ti,emifa-burst-priority", &val, 1); + if (!err) + soc_writel(val, ®s->bprio); + + err = of_property_read_u32_array(node, "ti,emifa-async-wait-control", &val, 1); + if (!err) + soc_writel(val, ®s->awcc); + + iounmap(regs); + of_node_put(node); + return 0; +} +pure_initcall(c6x_emifa_init); diff --git a/arch/c6x/platforms/megamod-pic.c b/arch/c6x/platforms/megamod-pic.c new file mode 100644 index 000000000000..7c37a947fb1c --- /dev/null +++ b/arch/c6x/platforms/megamod-pic.c @@ -0,0 +1,349 @@ +/* + * Support for C64x+ Megamodule Interrupt Controller + * + * Copyright (C) 2010, 2011 Texas Instruments Incorporated + * Contributed by: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <linux/slab.h> +#include <asm/soc.h> +#include <asm/megamod-pic.h> + +#define NR_COMBINERS 4 +#define NR_MUX_OUTPUTS 12 + +#define IRQ_UNMAPPED 0xffff + +/* + * Megamodule Interrupt Controller register layout + */ +struct megamod_regs { + u32 evtflag[8]; + u32 evtset[8]; + u32 evtclr[8]; + u32 reserved0[8]; + u32 evtmask[8]; + u32 mevtflag[8]; + u32 expmask[8]; + u32 mexpflag[8]; + u32 intmux_unused; + u32 intmux[7]; + u32 reserved1[8]; + u32 aegmux[2]; + u32 reserved2[14]; + u32 intxstat; + u32 intxclr; + u32 intdmask; + u32 reserved3[13]; + u32 evtasrt; +}; + +struct megamod_pic { + struct irq_host *irqhost; + struct megamod_regs __iomem *regs; + raw_spinlock_t lock; + + /* hw mux mapping */ + unsigned int output_to_irq[NR_MUX_OUTPUTS]; +}; + +static struct megamod_pic *mm_pic; + +struct megamod_cascade_data { + struct megamod_pic *pic; + int index; +}; + +static struct megamod_cascade_data cascade_data[NR_COMBINERS]; + +static void mask_megamod(struct irq_data *data) +{ + struct megamod_pic *pic = irq_data_get_irq_chip_data(data); + irq_hw_number_t src = irqd_to_hwirq(data); + u32 __iomem *evtmask = &pic->regs->evtmask[src / 32]; + + raw_spin_lock(&pic->lock); + soc_writel(soc_readl(evtmask) | (1 << (src & 31)), evtmask); + raw_spin_unlock(&pic->lock); +} + +static void unmask_megamod(struct irq_data *data) +{ + struct megamod_pic *pic = irq_data_get_irq_chip_data(data); + irq_hw_number_t src = irqd_to_hwirq(data); + u32 __iomem *evtmask = &pic->regs->evtmask[src / 32]; + + raw_spin_lock(&pic->lock); + soc_writel(soc_readl(evtmask) & ~(1 << (src & 31)), evtmask); + raw_spin_unlock(&pic->lock); +} + +static struct irq_chip megamod_chip = { + .name = "megamod", + .irq_mask = mask_megamod, + .irq_unmask = unmask_megamod, +}; + +static void megamod_irq_cascade(unsigned int irq, struct irq_desc *desc) +{ + struct megamod_cascade_data *cascade; + struct megamod_pic *pic; + u32 events; + int n, idx; + + cascade = irq_desc_get_handler_data(desc); + + pic = cascade->pic; + idx = cascade->index; + + while ((events = soc_readl(&pic->regs->mevtflag[idx])) != 0) { + n = __ffs(events); + + irq = irq_linear_revmap(pic->irqhost, idx * 32 + n); + + soc_writel(1 << n, &pic->regs->evtclr[idx]); + + generic_handle_irq(irq); + } +} + +static int megamod_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct megamod_pic *pic = h->host_data; + int i; + + /* We shouldn't see a hwirq which is muxed to core controller */ + for (i = 0; i < NR_MUX_OUTPUTS; i++) + if (pic->output_to_irq[i] == hw) + return -1; + + irq_set_chip_data(virq, pic); + irq_set_chip_and_handler(virq, &megamod_chip, handle_level_irq); + + /* Set default irq type */ + irq_set_irq_type(virq, IRQ_TYPE_NONE); + + return 0; +} + +static int megamod_xlate(struct irq_host *h, struct device_node *ct, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_type) + +{ + /* megamod intspecs must have 1 cell */ + BUG_ON(intsize != 1); + *out_hwirq = intspec[0]; + *out_type = IRQ_TYPE_NONE; + return 0; +} + +static struct irq_host_ops megamod_host_ops = { + .map = megamod_map, + .xlate = megamod_xlate, +}; + +static void __init set_megamod_mux(struct megamod_pic *pic, int src, int output) +{ + int index, offset; + u32 val; + + if (src < 0 || src >= (NR_COMBINERS * 32)) { + pic->output_to_irq[output] = IRQ_UNMAPPED; + return; + } + + /* four mappings per mux register */ + index = output / 4; + offset = (output & 3) * 8; + + val = soc_readl(&pic->regs->intmux[index]); + val &= ~(0xff << offset); + val |= src << offset; + soc_writel(val, &pic->regs->intmux[index]); +} + +/* + * Parse the MUX mapping, if one exists. + * + * The MUX map is an array of up to 12 cells; one for each usable core priority + * interrupt. The value of a given cell is the megamodule interrupt source + * which is to me MUXed to the output corresponding to the cell position + * withing the array. The first cell in the array corresponds to priority + * 4 and the last (12th) cell corresponds to priority 15. The allowed + * values are 4 - ((NR_COMBINERS * 32) - 1). Note that the combined interrupt + * sources (0 - 3) are not allowed to be mapped through this property. They + * are handled through the "interrupts" property. This allows us to use a + * value of zero as a "do not map" placeholder. + */ +static void __init parse_priority_map(struct megamod_pic *pic, + int *mapping, int size) +{ + struct device_node *np = pic->irqhost->of_node; + const __be32 *map; + int i, maplen; + u32 val; + + map = of_get_property(np, "ti,c64x+megamod-pic-mux", &maplen); + if (map) { + maplen /= 4; + if (maplen > size) + maplen = size; + + for (i = 0; i < maplen; i++) { + val = be32_to_cpup(map); + if (val && val >= 4) + mapping[i] = val; + ++map; + } + } +} + +static struct megamod_pic * __init init_megamod_pic(struct device_node *np) +{ + struct megamod_pic *pic; + int i, irq; + int mapping[NR_MUX_OUTPUTS]; + + pr_info("Initializing C64x+ Megamodule PIC\n"); + + pic = kzalloc(sizeof(struct megamod_pic), GFP_KERNEL); + if (!pic) { + pr_err("%s: Could not alloc PIC structure.\n", np->full_name); + return NULL; + } + + pic->irqhost = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, + NR_COMBINERS * 32, &megamod_host_ops, + IRQ_UNMAPPED); + if (!pic->irqhost) { + pr_err("%s: Could not alloc host.\n", np->full_name); + goto error_free; + } + + pic->irqhost->host_data = pic; + + raw_spin_lock_init(&pic->lock); + + pic->regs = of_iomap(np, 0); + if (!pic->regs) { + pr_err("%s: Could not map registers.\n", np->full_name); + goto error_free; + } + + /* Initialize MUX map */ + for (i = 0; i < ARRAY_SIZE(mapping); i++) + mapping[i] = IRQ_UNMAPPED; + + parse_priority_map(pic, mapping, ARRAY_SIZE(mapping)); + + /* + * We can have up to 12 interrupts cascading to the core controller. + * These cascades can be from the combined interrupt sources or for + * individual interrupt sources. The "interrupts" property only + * deals with the cascaded combined interrupts. The individual + * interrupts muxed to the core controller use the core controller + * as their interrupt parent. + */ + for (i = 0; i < NR_COMBINERS; i++) { + + irq = irq_of_parse_and_map(np, i); + if (irq == NO_IRQ) + continue; + + /* + * We count on the core priority interrupts (4 - 15) being + * direct mapped. Check that device tree provided something + * in that range. + */ + if (irq < 4 || irq >= NR_PRIORITY_IRQS) { + pr_err("%s: combiner-%d virq %d out of range!\n", + np->full_name, i, irq); + continue; + } + + /* record the mapping */ + mapping[irq - 4] = i; + + pr_debug("%s: combiner-%d cascading to virq %d\n", + np->full_name, i, irq); + + cascade_data[i].pic = pic; + cascade_data[i].index = i; + + /* mask and clear all events in combiner */ + soc_writel(~0, &pic->regs->evtmask[i]); + soc_writel(~0, &pic->regs->evtclr[i]); + + irq_set_handler_data(irq, &cascade_data[i]); + irq_set_chained_handler(irq, megamod_irq_cascade); + } + + /* Finally, set up the MUX registers */ + for (i = 0; i < NR_MUX_OUTPUTS; i++) { + if (mapping[i] != IRQ_UNMAPPED) { + pr_debug("%s: setting mux %d to priority %d\n", + np->full_name, mapping[i], i + 4); + set_megamod_mux(pic, mapping[i], i); + } + } + + return pic; + +error_free: + kfree(pic); + + return NULL; +} + +/* + * Return next active event after ACK'ing it. + * Return -1 if no events active. + */ +static int get_exception(void) +{ + int i, bit; + u32 mask; + + for (i = 0; i < NR_COMBINERS; i++) { + mask = soc_readl(&mm_pic->regs->mexpflag[i]); + if (mask) { + bit = __ffs(mask); + soc_writel(1 << bit, &mm_pic->regs->evtclr[i]); + return (i * 32) + bit; + } + } + return -1; +} + +static void assert_event(unsigned int val) +{ + soc_writel(val, &mm_pic->regs->evtasrt); +} + +void __init megamod_pic_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "ti,c64x+megamod-pic"); + if (!np) + return; + + mm_pic = init_megamod_pic(np); + of_node_put(np); + + soc_ops.get_exception = get_exception; + soc_ops.assert_event = assert_event; + + return; +} diff --git a/arch/c6x/platforms/platform.c b/arch/c6x/platforms/platform.c new file mode 100644 index 000000000000..26c1a355d600 --- /dev/null +++ b/arch/c6x/platforms/platform.c @@ -0,0 +1,17 @@ +/* + * Copyright 2011 Texas Instruments Incorporated + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/of_platform.h> + +static int __init c6x_device_probe(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + return 0; +} +core_initcall(c6x_device_probe); diff --git a/arch/c6x/platforms/pll.c b/arch/c6x/platforms/pll.c new file mode 100644 index 000000000000..3aa898f7ce4d --- /dev/null +++ b/arch/c6x/platforms/pll.c @@ -0,0 +1,444 @@ +/* + * Clock and PLL control for C64x+ devices + * + * Copyright (C) 2010, 2011 Texas Instruments. + * Contributed by: Mark Salter <msalter@redhat.com> + * + * Copied heavily from arm/mach-davinci/clock.c, so: + * + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/clkdev.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/err.h> + +#include <asm/clock.h> +#include <asm/soc.h> + +static LIST_HEAD(clocks); +static DEFINE_MUTEX(clocks_mutex); +static DEFINE_SPINLOCK(clockfw_lock); + +static void __clk_enable(struct clk *clk) +{ + if (clk->parent) + __clk_enable(clk->parent); + clk->usecount++; +} + +static void __clk_disable(struct clk *clk) +{ + if (WARN_ON(clk->usecount == 0)) + return; + --clk->usecount; + + if (clk->parent) + __clk_disable(clk->parent); +} + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + spin_lock_irqsave(&clockfw_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + if (clk == NULL || IS_ERR(clk)) + return; + + spin_lock_irqsave(&clockfw_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + if (clk->round_rate) + return clk->round_rate(clk, rate); + + return clk->rate; +} +EXPORT_SYMBOL(clk_round_rate); + +/* Propagate rate to children */ +static void propagate_rate(struct clk *root) +{ + struct clk *clk; + + list_for_each_entry(clk, &root->children, childnode) { + if (clk->recalc) + clk->rate = clk->recalc(clk); + propagate_rate(clk); + } +} + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk)) + return ret; + + if (clk->set_rate) + ret = clk->set_rate(clk, rate); + + spin_lock_irqsave(&clockfw_lock, flags); + if (ret == 0) { + if (clk->recalc) + clk->rate = clk->recalc(clk); + propagate_rate(clk); + } + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + unsigned long flags; + + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + /* Cannot change parent on enabled clock */ + if (WARN_ON(clk->usecount)) + return -EINVAL; + + mutex_lock(&clocks_mutex); + clk->parent = parent; + list_del_init(&clk->childnode); + list_add(&clk->childnode, &clk->parent->children); + mutex_unlock(&clocks_mutex); + + spin_lock_irqsave(&clockfw_lock, flags); + if (clk->recalc) + clk->rate = clk->recalc(clk); + propagate_rate(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} +EXPORT_SYMBOL(clk_set_parent); + +int clk_register(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + if (WARN(clk->parent && !clk->parent->rate, + "CLK: %s parent %s has no rate!\n", + clk->name, clk->parent->name)) + return -EINVAL; + + mutex_lock(&clocks_mutex); + list_add_tail(&clk->node, &clocks); + if (clk->parent) + list_add_tail(&clk->childnode, &clk->parent->children); + mutex_unlock(&clocks_mutex); + + /* If rate is already set, use it */ + if (clk->rate) + return 0; + + /* Else, see if there is a way to calculate it */ + if (clk->recalc) + clk->rate = clk->recalc(clk); + + /* Otherwise, default to parent rate */ + else if (clk->parent) + clk->rate = clk->parent->rate; + + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return; + + mutex_lock(&clocks_mutex); + list_del(&clk->node); + list_del(&clk->childnode); + mutex_unlock(&clocks_mutex); +} +EXPORT_SYMBOL(clk_unregister); + + +static u32 pll_read(struct pll_data *pll, int reg) +{ + return soc_readl(pll->base + reg); +} + +static unsigned long clk_sysclk_recalc(struct clk *clk) +{ + u32 v, plldiv = 0; + struct pll_data *pll; + unsigned long rate = clk->rate; + + if (WARN_ON(!clk->parent)) + return rate; + + rate = clk->parent->rate; + + /* the parent must be a PLL */ + if (WARN_ON(!clk->parent->pll_data)) + return rate; + + pll = clk->parent->pll_data; + + /* If pre-PLL, source clock is before the multiplier and divider(s) */ + if (clk->flags & PRE_PLL) + rate = pll->input_rate; + + if (!clk->div) { + pr_debug("%s: (no divider) rate = %lu KHz\n", + clk->name, rate / 1000); + return rate; + } + + if (clk->flags & FIXED_DIV_PLL) { + rate /= clk->div; + pr_debug("%s: (fixed divide by %d) rate = %lu KHz\n", + clk->name, clk->div, rate / 1000); + return rate; + } + + v = pll_read(pll, clk->div); + if (v & PLLDIV_EN) + plldiv = (v & PLLDIV_RATIO_MASK) + 1; + + if (plldiv == 0) + plldiv = 1; + + rate /= plldiv; + + pr_debug("%s: (divide by %d) rate = %lu KHz\n", + clk->name, plldiv, rate / 1000); + + return rate; +} + +static unsigned long clk_leafclk_recalc(struct clk *clk) +{ + if (WARN_ON(!clk->parent)) + return clk->rate; + + pr_debug("%s: (parent %s) rate = %lu KHz\n", + clk->name, clk->parent->name, clk->parent->rate / 1000); + + return clk->parent->rate; +} + +static unsigned long clk_pllclk_recalc(struct clk *clk) +{ + u32 ctrl, mult = 0, prediv = 0, postdiv = 0; + u8 bypass; + struct pll_data *pll = clk->pll_data; + unsigned long rate = clk->rate; + + if (clk->flags & FIXED_RATE_PLL) + return rate; + + ctrl = pll_read(pll, PLLCTL); + rate = pll->input_rate = clk->parent->rate; + + if (ctrl & PLLCTL_PLLEN) + bypass = 0; + else + bypass = 1; + + if (pll->flags & PLL_HAS_MUL) { + mult = pll_read(pll, PLLM); + mult = (mult & PLLM_PLLM_MASK) + 1; + } + if (pll->flags & PLL_HAS_PRE) { + prediv = pll_read(pll, PLLPRE); + if (prediv & PLLDIV_EN) + prediv = (prediv & PLLDIV_RATIO_MASK) + 1; + else + prediv = 0; + } + if (pll->flags & PLL_HAS_POST) { + postdiv = pll_read(pll, PLLPOST); + if (postdiv & PLLDIV_EN) + postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1; + else + postdiv = 1; + } + + if (!bypass) { + if (prediv) + rate /= prediv; + if (mult) + rate *= mult; + if (postdiv) + rate /= postdiv; + + pr_debug("PLL%d: input = %luMHz, pre[%d] mul[%d] post[%d] " + "--> %luMHz output.\n", + pll->num, clk->parent->rate / 1000000, + prediv, mult, postdiv, rate / 1000000); + } else + pr_debug("PLL%d: input = %luMHz, bypass mode.\n", + pll->num, clk->parent->rate / 1000000); + + return rate; +} + + +static void __init __init_clk(struct clk *clk) +{ + INIT_LIST_HEAD(&clk->node); + INIT_LIST_HEAD(&clk->children); + INIT_LIST_HEAD(&clk->childnode); + + if (!clk->recalc) { + + /* Check if clock is a PLL */ + if (clk->pll_data) + clk->recalc = clk_pllclk_recalc; + + /* Else, if it is a PLL-derived clock */ + else if (clk->flags & CLK_PLL) + clk->recalc = clk_sysclk_recalc; + + /* Otherwise, it is a leaf clock (PSC clock) */ + else if (clk->parent) + clk->recalc = clk_leafclk_recalc; + } +} + +void __init c6x_clks_init(struct clk_lookup *clocks) +{ + struct clk_lookup *c; + struct clk *clk; + size_t num_clocks = 0; + + for (c = clocks; c->clk; c++) { + clk = c->clk; + + __init_clk(clk); + clk_register(clk); + num_clocks++; + + /* Turn on clocks that Linux doesn't otherwise manage */ + if (clk->flags & ALWAYS_ENABLED) + clk_enable(clk); + } + + clkdev_add_table(clocks, num_clocks); +} + +#ifdef CONFIG_DEBUG_FS + +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +#define CLKNAME_MAX 10 /* longest clock name */ +#define NEST_DELTA 2 +#define NEST_MAX 4 + +static void +dump_clock(struct seq_file *s, unsigned nest, struct clk *parent) +{ + char *state; + char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX]; + struct clk *clk; + unsigned i; + + if (parent->flags & CLK_PLL) + state = "pll"; + else + state = ""; + + /* <nest spaces> name <pad to end> */ + memset(buf, ' ', sizeof(buf) - 1); + buf[sizeof(buf) - 1] = 0; + i = strlen(parent->name); + memcpy(buf + nest, parent->name, + min(i, (unsigned)(sizeof(buf) - 1 - nest))); + + seq_printf(s, "%s users=%2d %-3s %9ld Hz\n", + buf, parent->usecount, state, clk_get_rate(parent)); + /* REVISIT show device associations too */ + + /* cost is now small, but not linear... */ + list_for_each_entry(clk, &parent->children, childnode) { + dump_clock(s, nest + NEST_DELTA, clk); + } +} + +static int c6x_ck_show(struct seq_file *m, void *v) +{ + struct clk *clk; + + /* + * Show clock tree; We trust nonzero usecounts equate to PSC enables... + */ + mutex_lock(&clocks_mutex); + list_for_each_entry(clk, &clocks, node) + if (!clk->parent) + dump_clock(m, 0, clk); + mutex_unlock(&clocks_mutex); + + return 0; +} + +static int c6x_ck_open(struct inode *inode, struct file *file) +{ + return single_open(file, c6x_ck_show, NULL); +} + +static const struct file_operations c6x_ck_operations = { + .open = c6x_ck_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init c6x_clk_debugfs_init(void) +{ + debugfs_create_file("c6x_clocks", S_IFREG | S_IRUGO, NULL, NULL, + &c6x_ck_operations); + + return 0; +} +device_initcall(c6x_clk_debugfs_init); +#endif /* CONFIG_DEBUG_FS */ diff --git a/arch/c6x/platforms/plldata.c b/arch/c6x/platforms/plldata.c new file mode 100644 index 000000000000..2cfd6f42968f --- /dev/null +++ b/arch/c6x/platforms/plldata.c @@ -0,0 +1,404 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2011 Texas Instruments Incorporated + * Author: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/ioport.h> +#include <linux/clkdev.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <asm/clock.h> +#include <asm/setup.h> +#include <asm/irq.h> + +/* + * Common SoC clock support. + */ + +/* Default input for PLL1 */ +struct clk clkin1 = { + .name = "clkin1", + .node = LIST_HEAD_INIT(clkin1.node), + .children = LIST_HEAD_INIT(clkin1.children), + .childnode = LIST_HEAD_INIT(clkin1.childnode), +}; + +struct pll_data c6x_soc_pll1 = { + .num = 1, + .sysclks = { + { + .name = "pll1", + .parent = &clkin1, + .pll_data = &c6x_soc_pll1, + .flags = CLK_PLL, + }, + { + .name = "pll1_sysclk1", + .parent = &c6x_soc_pll1.sysclks[0], + .flags = CLK_PLL, + }, + { + .name = "pll1_sysclk2", + .parent = &c6x_soc_pll1.sysclks[0], + .flags = CLK_PLL, + }, + { + .name = "pll1_sysclk3", + .parent = &c6x_soc_pll1.sysclks[0], + .flags = CLK_PLL, + }, + { + .name = "pll1_sysclk4", + .parent = &c6x_soc_pll1.sysclks[0], + .flags = CLK_PLL, + }, + { + .name = "pll1_sysclk5", + .parent = &c6x_soc_pll1.sysclks[0], + .flags = CLK_PLL, + }, + { + .name = "pll1_sysclk6", + .parent = &c6x_soc_pll1.sysclks[0], + .flags = CLK_PLL, + }, + { + .name = "pll1_sysclk7", + .parent = &c6x_soc_pll1.sysclks[0], + .flags = CLK_PLL, + }, + { + .name = "pll1_sysclk8", + .parent = &c6x_soc_pll1.sysclks[0], + .flags = CLK_PLL, + }, + { + .name = "pll1_sysclk9", + .parent = &c6x_soc_pll1.sysclks[0], + .flags = CLK_PLL, + }, + { + .name = "pll1_sysclk10", + .parent = &c6x_soc_pll1.sysclks[0], + .flags = CLK_PLL, + }, + { + .name = "pll1_sysclk11", + .parent = &c6x_soc_pll1.sysclks[0], + .flags = CLK_PLL, + }, + { + .name = "pll1_sysclk12", + .parent = &c6x_soc_pll1.sysclks[0], + .flags = CLK_PLL, + }, + { + .name = "pll1_sysclk13", + .parent = &c6x_soc_pll1.sysclks[0], + .flags = CLK_PLL, + }, + { + .name = "pll1_sysclk14", + .parent = &c6x_soc_pll1.sysclks[0], + .flags = CLK_PLL, + }, + { + .name = "pll1_sysclk15", + .parent = &c6x_soc_pll1.sysclks[0], + .flags = CLK_PLL, + }, + { + .name = "pll1_sysclk16", + .parent = &c6x_soc_pll1.sysclks[0], + .flags = CLK_PLL, + }, + }, +}; + +/* CPU core clock */ +struct clk c6x_core_clk = { + .name = "core", +}; + +/* miscellaneous IO clocks */ +struct clk c6x_i2c_clk = { + .name = "i2c", +}; + +struct clk c6x_watchdog_clk = { + .name = "watchdog", +}; + +struct clk c6x_mcbsp1_clk = { + .name = "mcbsp1", +}; + +struct clk c6x_mcbsp2_clk = { + .name = "mcbsp2", +}; + +struct clk c6x_mdio_clk = { + .name = "mdio", +}; + + +#ifdef CONFIG_SOC_TMS320C6455 +static struct clk_lookup c6455_clks[] = { + CLK(NULL, "pll1", &c6x_soc_pll1.sysclks[0]), + CLK(NULL, "pll1_sysclk2", &c6x_soc_pll1.sysclks[2]), + CLK(NULL, "pll1_sysclk3", &c6x_soc_pll1.sysclks[3]), + CLK(NULL, "pll1_sysclk4", &c6x_soc_pll1.sysclks[4]), + CLK(NULL, "pll1_sysclk5", &c6x_soc_pll1.sysclks[5]), + CLK(NULL, "core", &c6x_core_clk), + CLK("i2c_davinci.1", NULL, &c6x_i2c_clk), + CLK("watchdog", NULL, &c6x_watchdog_clk), + CLK("2c81800.mdio", NULL, &c6x_mdio_clk), + CLK("", NULL, NULL) +}; + + +static void __init c6455_setup_clocks(struct device_node *node) +{ + struct pll_data *pll = &c6x_soc_pll1; + struct clk *sysclks = pll->sysclks; + + pll->flags = PLL_HAS_PRE | PLL_HAS_MUL; + + sysclks[2].flags |= FIXED_DIV_PLL; + sysclks[2].div = 3; + sysclks[3].flags |= FIXED_DIV_PLL; + sysclks[3].div = 6; + sysclks[4].div = PLLDIV4; + sysclks[5].div = PLLDIV5; + + c6x_core_clk.parent = &sysclks[0]; + c6x_i2c_clk.parent = &sysclks[3]; + c6x_watchdog_clk.parent = &sysclks[3]; + c6x_mdio_clk.parent = &sysclks[3]; + + c6x_clks_init(c6455_clks); +} +#endif /* CONFIG_SOC_TMS320C6455 */ + +#ifdef CONFIG_SOC_TMS320C6457 +static struct clk_lookup c6457_clks[] = { + CLK(NULL, "pll1", &c6x_soc_pll1.sysclks[0]), + CLK(NULL, "pll1_sysclk1", &c6x_soc_pll1.sysclks[1]), + CLK(NULL, "pll1_sysclk2", &c6x_soc_pll1.sysclks[2]), + CLK(NULL, "pll1_sysclk3", &c6x_soc_pll1.sysclks[3]), + CLK(NULL, "pll1_sysclk4", &c6x_soc_pll1.sysclks[4]), + CLK(NULL, "pll1_sysclk5", &c6x_soc_pll1.sysclks[5]), + CLK(NULL, "core", &c6x_core_clk), + CLK("i2c_davinci.1", NULL, &c6x_i2c_clk), + CLK("watchdog", NULL, &c6x_watchdog_clk), + CLK("2c81800.mdio", NULL, &c6x_mdio_clk), + CLK("", NULL, NULL) +}; + +static void __init c6457_setup_clocks(struct device_node *node) +{ + struct pll_data *pll = &c6x_soc_pll1; + struct clk *sysclks = pll->sysclks; + + pll->flags = PLL_HAS_MUL | PLL_HAS_POST; + + sysclks[1].flags |= FIXED_DIV_PLL; + sysclks[1].div = 1; + sysclks[2].flags |= FIXED_DIV_PLL; + sysclks[2].div = 3; + sysclks[3].flags |= FIXED_DIV_PLL; + sysclks[3].div = 6; + sysclks[4].div = PLLDIV4; + sysclks[5].div = PLLDIV5; + + c6x_core_clk.parent = &sysclks[1]; + c6x_i2c_clk.parent = &sysclks[3]; + c6x_watchdog_clk.parent = &sysclks[5]; + c6x_mdio_clk.parent = &sysclks[5]; + + c6x_clks_init(c6457_clks); +} +#endif /* CONFIG_SOC_TMS320C6455 */ + +#ifdef CONFIG_SOC_TMS320C6472 +static struct clk_lookup c6472_clks[] = { + CLK(NULL, "pll1", &c6x_soc_pll1.sysclks[0]), + CLK(NULL, "pll1_sysclk1", &c6x_soc_pll1.sysclks[1]), + CLK(NULL, "pll1_sysclk2", &c6x_soc_pll1.sysclks[2]), + CLK(NULL, "pll1_sysclk3", &c6x_soc_pll1.sysclks[3]), + CLK(NULL, "pll1_sysclk4", &c6x_soc_pll1.sysclks[4]), + CLK(NULL, "pll1_sysclk5", &c6x_soc_pll1.sysclks[5]), + CLK(NULL, "pll1_sysclk6", &c6x_soc_pll1.sysclks[6]), + CLK(NULL, "pll1_sysclk7", &c6x_soc_pll1.sysclks[7]), + CLK(NULL, "pll1_sysclk8", &c6x_soc_pll1.sysclks[8]), + CLK(NULL, "pll1_sysclk9", &c6x_soc_pll1.sysclks[9]), + CLK(NULL, "pll1_sysclk10", &c6x_soc_pll1.sysclks[10]), + CLK(NULL, "core", &c6x_core_clk), + CLK("i2c_davinci.1", NULL, &c6x_i2c_clk), + CLK("watchdog", NULL, &c6x_watchdog_clk), + CLK("2c81800.mdio", NULL, &c6x_mdio_clk), + CLK("", NULL, NULL) +}; + +/* assumptions used for delay loop calculations */ +#define MIN_CLKIN1_KHz 15625 +#define MAX_CORE_KHz 700000 +#define MIN_PLLOUT_KHz MIN_CLKIN1_KHz + +static void __init c6472_setup_clocks(struct device_node *node) +{ + struct pll_data *pll = &c6x_soc_pll1; + struct clk *sysclks = pll->sysclks; + int i; + + pll->flags = PLL_HAS_MUL; + + for (i = 1; i <= 6; i++) { + sysclks[i].flags |= FIXED_DIV_PLL; + sysclks[i].div = 1; + } + + sysclks[7].flags |= FIXED_DIV_PLL; + sysclks[7].div = 3; + sysclks[8].flags |= FIXED_DIV_PLL; + sysclks[8].div = 6; + sysclks[9].flags |= FIXED_DIV_PLL; + sysclks[9].div = 2; + sysclks[10].div = PLLDIV10; + + c6x_core_clk.parent = &sysclks[get_coreid() + 1]; + c6x_i2c_clk.parent = &sysclks[8]; + c6x_watchdog_clk.parent = &sysclks[8]; + c6x_mdio_clk.parent = &sysclks[5]; + + c6x_clks_init(c6472_clks); +} +#endif /* CONFIG_SOC_TMS320C6472 */ + + +#ifdef CONFIG_SOC_TMS320C6474 +static struct clk_lookup c6474_clks[] = { + CLK(NULL, "pll1", &c6x_soc_pll1.sysclks[0]), + CLK(NULL, "pll1_sysclk7", &c6x_soc_pll1.sysclks[7]), + CLK(NULL, "pll1_sysclk9", &c6x_soc_pll1.sysclks[9]), + CLK(NULL, "pll1_sysclk10", &c6x_soc_pll1.sysclks[10]), + CLK(NULL, "pll1_sysclk11", &c6x_soc_pll1.sysclks[11]), + CLK(NULL, "pll1_sysclk12", &c6x_soc_pll1.sysclks[12]), + CLK(NULL, "pll1_sysclk13", &c6x_soc_pll1.sysclks[13]), + CLK(NULL, "core", &c6x_core_clk), + CLK("i2c_davinci.1", NULL, &c6x_i2c_clk), + CLK("mcbsp.1", NULL, &c6x_mcbsp1_clk), + CLK("mcbsp.2", NULL, &c6x_mcbsp2_clk), + CLK("watchdog", NULL, &c6x_watchdog_clk), + CLK("2c81800.mdio", NULL, &c6x_mdio_clk), + CLK("", NULL, NULL) +}; + +static void __init c6474_setup_clocks(struct device_node *node) +{ + struct pll_data *pll = &c6x_soc_pll1; + struct clk *sysclks = pll->sysclks; + + pll->flags = PLL_HAS_MUL; + + sysclks[7].flags |= FIXED_DIV_PLL; + sysclks[7].div = 1; + sysclks[9].flags |= FIXED_DIV_PLL; + sysclks[9].div = 3; + sysclks[10].flags |= FIXED_DIV_PLL; + sysclks[10].div = 6; + + sysclks[11].div = PLLDIV11; + + sysclks[12].flags |= FIXED_DIV_PLL; + sysclks[12].div = 2; + + sysclks[13].div = PLLDIV13; + + c6x_core_clk.parent = &sysclks[7]; + c6x_i2c_clk.parent = &sysclks[10]; + c6x_watchdog_clk.parent = &sysclks[10]; + c6x_mcbsp1_clk.parent = &sysclks[10]; + c6x_mcbsp2_clk.parent = &sysclks[10]; + + c6x_clks_init(c6474_clks); +} +#endif /* CONFIG_SOC_TMS320C6474 */ + +static struct of_device_id c6x_clkc_match[] __initdata = { +#ifdef CONFIG_SOC_TMS320C6455 + { .compatible = "ti,c6455-pll", .data = c6455_setup_clocks }, +#endif +#ifdef CONFIG_SOC_TMS320C6457 + { .compatible = "ti,c6457-pll", .data = c6457_setup_clocks }, +#endif +#ifdef CONFIG_SOC_TMS320C6472 + { .compatible = "ti,c6472-pll", .data = c6472_setup_clocks }, +#endif +#ifdef CONFIG_SOC_TMS320C6474 + { .compatible = "ti,c6474-pll", .data = c6474_setup_clocks }, +#endif + { .compatible = "ti,c64x+pll" }, + {} +}; + +void __init c64x_setup_clocks(void) +{ + void (*__setup_clocks)(struct device_node *np); + struct pll_data *pll = &c6x_soc_pll1; + struct device_node *node; + const struct of_device_id *id; + int err; + u32 val; + + node = of_find_matching_node(NULL, c6x_clkc_match); + if (!node) + return; + + pll->base = of_iomap(node, 0); + if (!pll->base) + goto out; + + err = of_property_read_u32(node, "clock-frequency", &val); + if (err || val == 0) { + pr_err("%s: no clock-frequency found! Using %dMHz\n", + node->full_name, (int)val / 1000000); + val = 25000000; + } + clkin1.rate = val; + + err = of_property_read_u32(node, "ti,c64x+pll-bypass-delay", &val); + if (err) + val = 5000; + pll->bypass_delay = val; + + err = of_property_read_u32(node, "ti,c64x+pll-reset-delay", &val); + if (err) + val = 30000; + pll->reset_delay = val; + + err = of_property_read_u32(node, "ti,c64x+pll-lock-delay", &val); + if (err) + val = 30000; + pll->lock_delay = val; + + /* id->data is a pointer to SoC-specific setup */ + id = of_match_node(c6x_clkc_match, node); + if (id && id->data) { + __setup_clocks = id->data; + __setup_clocks(node); + } + +out: + of_node_put(node); +} diff --git a/arch/c6x/platforms/timer64.c b/arch/c6x/platforms/timer64.c new file mode 100644 index 000000000000..03c03c249191 --- /dev/null +++ b/arch/c6x/platforms/timer64.c @@ -0,0 +1,244 @@ +/* + * Copyright (C) 2010, 2011 Texas Instruments Incorporated + * Contributed by: Mark Salter (msalter@redhat.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <asm/soc.h> +#include <asm/dscr.h> +#include <asm/timer64.h> + +struct timer_regs { + u32 reserved0; + u32 emumgt; + u32 reserved1; + u32 reserved2; + u32 cntlo; + u32 cnthi; + u32 prdlo; + u32 prdhi; + u32 tcr; + u32 tgcr; + u32 wdtcr; +}; + +static struct timer_regs __iomem *timer; + +#define TCR_TSTATLO 0x001 +#define TCR_INVOUTPLO 0x002 +#define TCR_INVINPLO 0x004 +#define TCR_CPLO 0x008 +#define TCR_ENAMODELO_ONCE 0x040 +#define TCR_ENAMODELO_CONT 0x080 +#define TCR_ENAMODELO_MASK 0x0c0 +#define TCR_PWIDLO_MASK 0x030 +#define TCR_CLKSRCLO 0x100 +#define TCR_TIENLO 0x200 +#define TCR_TSTATHI (0x001 << 16) +#define TCR_INVOUTPHI (0x002 << 16) +#define TCR_CPHI (0x008 << 16) +#define TCR_PWIDHI_MASK (0x030 << 16) +#define TCR_ENAMODEHI_ONCE (0x040 << 16) +#define TCR_ENAMODEHI_CONT (0x080 << 16) +#define TCR_ENAMODEHI_MASK (0x0c0 << 16) + +#define TGCR_TIMLORS 0x001 +#define TGCR_TIMHIRS 0x002 +#define TGCR_TIMMODE_UD32 0x004 +#define TGCR_TIMMODE_WDT64 0x008 +#define TGCR_TIMMODE_CD32 0x00c +#define TGCR_TIMMODE_MASK 0x00c +#define TGCR_PSCHI_MASK (0x00f << 8) +#define TGCR_TDDRHI_MASK (0x00f << 12) + +/* + * Timer clocks are divided down from the CPU clock + * The divisor is in the EMUMGTCLKSPD register + */ +#define TIMER_DIVISOR \ + ((soc_readl(&timer->emumgt) & (0xf << 16)) >> 16) + +#define TIMER64_RATE (c6x_core_freq / TIMER_DIVISOR) + +#define TIMER64_MODE_DISABLED 0 +#define TIMER64_MODE_ONE_SHOT TCR_ENAMODELO_ONCE +#define TIMER64_MODE_PERIODIC TCR_ENAMODELO_CONT + +static int timer64_mode; +static int timer64_devstate_id = -1; + +static void timer64_config(unsigned long period) +{ + u32 tcr = soc_readl(&timer->tcr) & ~TCR_ENAMODELO_MASK; + + soc_writel(tcr, &timer->tcr); + soc_writel(period - 1, &timer->prdlo); + soc_writel(0, &timer->cntlo); + tcr |= timer64_mode; + soc_writel(tcr, &timer->tcr); +} + +static void timer64_enable(void) +{ + u32 val; + + if (timer64_devstate_id >= 0) + dscr_set_devstate(timer64_devstate_id, DSCR_DEVSTATE_ENABLED); + + /* disable timer, reset count */ + soc_writel(soc_readl(&timer->tcr) & ~TCR_ENAMODELO_MASK, &timer->tcr); + soc_writel(0, &timer->prdlo); + + /* use internal clock and 1 cycle pulse width */ + val = soc_readl(&timer->tcr); + soc_writel(val & ~(TCR_CLKSRCLO | TCR_PWIDLO_MASK), &timer->tcr); + + /* dual 32-bit unchained mode */ + val = soc_readl(&timer->tgcr) & ~TGCR_TIMMODE_MASK; + soc_writel(val, &timer->tgcr); + soc_writel(val | (TGCR_TIMLORS | TGCR_TIMMODE_UD32), &timer->tgcr); +} + +static void timer64_disable(void) +{ + /* disable timer, reset count */ + soc_writel(soc_readl(&timer->tcr) & ~TCR_ENAMODELO_MASK, &timer->tcr); + soc_writel(0, &timer->prdlo); + + if (timer64_devstate_id >= 0) + dscr_set_devstate(timer64_devstate_id, DSCR_DEVSTATE_DISABLED); +} + +static int next_event(unsigned long delta, + struct clock_event_device *evt) +{ + timer64_config(delta); + return 0; +} + +static void set_clock_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + timer64_enable(); + timer64_mode = TIMER64_MODE_PERIODIC; + timer64_config(TIMER64_RATE / HZ); + break; + case CLOCK_EVT_MODE_ONESHOT: + timer64_enable(); + timer64_mode = TIMER64_MODE_ONE_SHOT; + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + timer64_mode = TIMER64_MODE_DISABLED; + timer64_disable(); + break; + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static struct clock_event_device t64_clockevent_device = { + .name = "TIMER64_EVT32_TIMER", + .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, + .rating = 200, + .set_mode = set_clock_mode, + .set_next_event = next_event, +}; + +static irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *cd = &t64_clockevent_device; + + cd->event_handler(cd); + + return IRQ_HANDLED; +} + +static struct irqaction timer_iact = { + .name = "timer", + .flags = IRQF_TIMER, + .handler = timer_interrupt, + .dev_id = &t64_clockevent_device, +}; + +void __init timer64_init(void) +{ + struct clock_event_device *cd = &t64_clockevent_device; + struct device_node *np, *first = NULL; + u32 val; + int err, found = 0; + + for_each_compatible_node(np, NULL, "ti,c64x+timer64") { + err = of_property_read_u32(np, "ti,core-mask", &val); + if (!err) { + if (val & (1 << get_coreid())) { + found = 1; + break; + } + } else if (!first) + first = np; + } + if (!found) { + /* try first one with no core-mask */ + if (first) + np = of_node_get(first); + else { + pr_debug("Cannot find ti,c64x+timer64 timer.\n"); + return; + } + } + + timer = of_iomap(np, 0); + if (!timer) { + pr_debug("%s: Cannot map timer registers.\n", np->full_name); + goto out; + } + pr_debug("%s: Timer registers=%p.\n", np->full_name, timer); + + cd->irq = irq_of_parse_and_map(np, 0); + if (cd->irq == NO_IRQ) { + pr_debug("%s: Cannot find interrupt.\n", np->full_name); + iounmap(timer); + goto out; + } + + /* If there is a device state control, save the ID. */ + err = of_property_read_u32(np, "ti,dscr-dev-enable", &val); + if (!err) { + timer64_devstate_id = val; + + /* + * It is necessary to enable the timer block here because + * the TIMER_DIVISOR macro needs to read a timer register + * to get the divisor. + */ + dscr_set_devstate(timer64_devstate_id, DSCR_DEVSTATE_ENABLED); + } + + pr_debug("%s: Timer irq=%d.\n", np->full_name, cd->irq); + + clockevents_calc_mult_shift(cd, c6x_core_freq / TIMER_DIVISOR, 5); + + cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd); + cd->min_delta_ns = clockevent_delta2ns(250, cd); + + cd->cpumask = cpumask_of(smp_processor_id()); + + clockevents_register_device(cd); + setup_irq(cd->irq, &timer_iact); + +out: + of_node_put(np); + return; +} diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 408b055c585f..b3abfb08aa5c 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -19,10 +19,6 @@ config GENERIC_CMOS_UPDATE config ARCH_USES_GETTIMEOFFSET def_bool n -config GENERIC_IOMAP - bool - default y - config ARCH_HAS_ILOG2_U32 bool default n @@ -52,6 +48,7 @@ config CRIS select HAVE_IDE select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW + select GENERIC_IOMAP config HZ int diff --git a/arch/cris/Kconfig.debug b/arch/cris/Kconfig.debug index 0b9a630dc812..14881e81e8a3 100644 --- a/arch/cris/Kconfig.debug +++ b/arch/cris/Kconfig.debug @@ -1,6 +1,5 @@ menu "Kernel hacking" -#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC config PROFILING bool "Kernel profiling support" diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c index a2bde3744622..b34438e026be 100644 --- a/arch/cris/arch-v32/drivers/axisflashmap.c +++ b/arch/cris/arch-v32/drivers/axisflashmap.c @@ -404,8 +404,7 @@ static int __init init_axis_flash(void) */ int blockstat; do { - blockstat = main_mtd->block_isbad(main_mtd, - ptable_sector); + blockstat = mtd_block_isbad(main_mtd, ptable_sector); if (blockstat < 0) ptable_sector = 0; /* read error */ else if (blockstat) @@ -413,8 +412,8 @@ static int __init init_axis_flash(void) } while (blockstat && ptable_sector); #endif if (ptable_sector) { - main_mtd->read(main_mtd, ptable_sector, PAGESIZE, - &len, page); + mtd_read(main_mtd, ptable_sector, PAGESIZE, &len, + page); ptable_head = &((struct partitiontable *) page)->head; } diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c index bb978ede8985..6773fc83a670 100644 --- a/arch/cris/arch-v32/kernel/time.c +++ b/arch/cris/arch-v32/kernel/time.c @@ -47,14 +47,12 @@ static struct clocksource cont_rotime = { .rating = 300, .read = read_cont_rotime, .mask = CLOCKSOURCE_MASK(32), - .shift = 10, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; static int __init etrax_init_cont_rotime(void) { - cont_rotime.mult = clocksource_khz2mult(100000, cont_rotime.shift); - clocksource_register(&cont_rotime); + clocksource_register_khz(&cont_rotime, 100000); return 0; } arch_initcall(etrax_init_cont_rotime); diff --git a/arch/cris/include/asm/ipcbuf.h b/arch/cris/include/asm/ipcbuf.h index 8b0c18b02844..84c7e51cb6d0 100644 --- a/arch/cris/include/asm/ipcbuf.h +++ b/arch/cris/include/asm/ipcbuf.h @@ -1,29 +1 @@ -#ifndef __CRIS_IPCBUF_H__ -#define __CRIS_IPCBUF_H__ - -/* - * The user_ipc_perm structure for CRIS architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __CRIS_IPCBUF_H__ */ +#include <asm-generic/ipcbuf.h> diff --git a/arch/cris/include/asm/socket.h b/arch/cris/include/asm/socket.h index 1a4a61909ca8..e269264df7c4 100644 --- a/arch/cris/include/asm/socket.h +++ b/arch/cris/include/asm/socket.h @@ -64,6 +64,9 @@ #define SO_RXQ_OVFL 40 +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS + #endif /* _ASM_SOCKET_H */ diff --git a/arch/cris/include/asm/thread_info.h b/arch/cris/include/asm/thread_info.h index 332f19c54557..29b92884d793 100644 --- a/arch/cris/include/asm/thread_info.h +++ b/arch/cris/include/asm/thread_info.h @@ -86,7 +86,6 @@ struct thread_info { #define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */ #define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 17 /* is terminating due to OOM killer */ -#define TIF_FREEZE 18 /* is freezing for suspend */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) @@ -94,7 +93,6 @@ struct thread_info { #define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) #define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) -#define _TIF_FREEZE (1<<TIF_FREEZE) #define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ #define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */ diff --git a/arch/cris/include/asm/types.h b/arch/cris/include/asm/types.h index 551a12c0aa01..adaf82780bb4 100644 --- a/arch/cris/include/asm/types.h +++ b/arch/cris/include/asm/types.h @@ -3,12 +3,6 @@ #include <asm-generic/int-ll64.h> -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - /* * These aren't exported outside the kernel to avoid name space clashes */ diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index bad27a6ff407..a685910d2d5c 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -8,6 +8,7 @@ config FRV select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW select ARCH_HAVE_NMI_SAFE_CMPXCHG + select GENERIC_CPU_DEVICES config ZONE_DMA bool @@ -317,6 +318,7 @@ config PCI bool "Use PCI" depends on MB93090_MB00 default y + select GENERIC_PCI_IOMAP help Some FR-V systems (such as the MB93090-MB00 VDK) have PCI onboard. If you have one of these boards and you wish to use the PCI @@ -341,16 +343,6 @@ source "drivers/pci/Kconfig" source "drivers/pcmcia/Kconfig" -#config MATH_EMULATION -# bool "Math emulation support (EXPERIMENTAL)" -# depends on EXPERIMENTAL -# help -# At some point in the future, this will cause floating-point math -# instructions to be emulated by the kernel on machines that lack a -# floating-point math coprocessor. Thrill-seekers and chronically -# sleep-deprived psychotic hacker types can say Y now, everyone else -# should probably wait a while. - menu "Power management options" config ARCH_SUSPEND_POSSIBLE diff --git a/arch/frv/include/asm/io.h b/arch/frv/include/asm/io.h index ca7475e73b5e..8cb50a2fbcb2 100644 --- a/arch/frv/include/asm/io.h +++ b/arch/frv/include/asm/io.h @@ -21,6 +21,7 @@ #include <asm/virtconvert.h> #include <asm/string.h> #include <asm/mb-regs.h> +#include <asm-generic/pci_iomap.h> #include <linux/delay.h> /* @@ -370,7 +371,6 @@ static inline void iowrite32_rep(void __iomem *p, const void *src, unsigned long /* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ struct pci_dev; -extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p) { } diff --git a/arch/frv/include/asm/ipcbuf.h b/arch/frv/include/asm/ipcbuf.h index b546f67e455f..84c7e51cb6d0 100644 --- a/arch/frv/include/asm/ipcbuf.h +++ b/arch/frv/include/asm/ipcbuf.h @@ -1,30 +1 @@ -#ifndef __ASM_IPCBUF_H__ -#define __ASM_IPCBUF_H__ - -/* - * The user_ipc_perm structure for FR-V architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __ASM_IPCBUF_H__ */ - +#include <asm-generic/ipcbuf.h> diff --git a/arch/frv/include/asm/socket.h b/arch/frv/include/asm/socket.h index a6b26880c1ec..ce80fdadcce5 100644 --- a/arch/frv/include/asm/socket.h +++ b/arch/frv/include/asm/socket.h @@ -62,5 +62,8 @@ #define SO_RXQ_OVFL 40 +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS + #endif /* _ASM_SOCKET_H */ diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h index cefbe73dc119..92d83ea99ae5 100644 --- a/arch/frv/include/asm/thread_info.h +++ b/arch/frv/include/asm/thread_info.h @@ -111,7 +111,6 @@ register struct thread_info *__current_thread_info asm("gr15"); #define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ #define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 17 /* is terminating due to OOM killer */ -#define TIF_FREEZE 18 /* freezing for suspend */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) @@ -120,7 +119,6 @@ register struct thread_info *__current_thread_info asm("gr15"); #define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) -#define _TIF_FREEZE (1 << TIF_FREEZE) #define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ #define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */ diff --git a/arch/frv/include/asm/types.h b/arch/frv/include/asm/types.h index aa3e7fdc7f29..390a612f3a58 100644 --- a/arch/frv/include/asm/types.h +++ b/arch/frv/include/asm/types.h @@ -14,12 +14,6 @@ #include <asm-generic/int-ll64.h> -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - /* * These aren't exported outside the kernel to avoid name space clashes */ diff --git a/arch/frv/mb93090-mb00/Makefile b/arch/frv/mb93090-mb00/Makefile index b73b542f8f48..21f1df1b378a 100644 --- a/arch/frv/mb93090-mb00/Makefile +++ b/arch/frv/mb93090-mb00/Makefile @@ -3,7 +3,7 @@ # ifeq "$(CONFIG_PCI)" "y" -obj-y := pci-frv.o pci-irq.o pci-vdk.o pci-iomap.o +obj-y := pci-frv.o pci-irq.o pci-vdk.o ifeq "$(CONFIG_MMU)" "y" obj-y += pci-dma.o diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c index 6b4fb28e9f99..c28121765448 100644 --- a/arch/frv/mb93090-mb00/pci-frv.c +++ b/arch/frv/mb93090-mb00/pci-frv.c @@ -194,23 +194,3 @@ void __init pcibios_resource_survey(void) pcibios_allocate_resources(1); pcibios_assign_resources(); } - -/* - * If we set up a device for bus mastering, we need to check the latency - * timer as certain crappy BIOSes forget to set it properly. - */ -unsigned int pcibios_max_latency = 255; - -void pcibios_set_master(struct pci_dev *dev) -{ - u8 lat; - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - else - return; - printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} diff --git a/arch/frv/mb93090-mb00/pci-frv.h b/arch/frv/mb93090-mb00/pci-frv.h index f3fe55914793..089eeba4f3bc 100644 --- a/arch/frv/mb93090-mb00/pci-frv.h +++ b/arch/frv/mb93090-mb00/pci-frv.h @@ -26,8 +26,6 @@ extern unsigned int __nongpreldata pci_probe; /* pci-frv.c */ -extern unsigned int pcibios_max_latency; - void pcibios_resource_survey(void); /* pci-vdk.c */ diff --git a/arch/frv/mb93090-mb00/pci-iomap.c b/arch/frv/mb93090-mb00/pci-iomap.c deleted file mode 100644 index 35f6df28351e..000000000000 --- a/arch/frv/mb93090-mb00/pci-iomap.c +++ /dev/null @@ -1,29 +0,0 @@ -/* pci-iomap.c: description - * - * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/pci.h> -#include <linux/module.h> - -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (!len || !start) - return NULL; - - if ((flags & IORESOURCE_IO) || (flags & IORESOURCE_MEM)) - return (void __iomem *) start; - - return NULL; -} - -EXPORT_SYMBOL(pci_iomap); diff --git a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c index f8dd37e49535..6b0b82ff4419 100644 --- a/arch/frv/mb93090-mb00/pci-vdk.c +++ b/arch/frv/mb93090-mb00/pci-vdk.c @@ -327,11 +327,6 @@ void __init pcibios_fixup_bus(struct pci_bus *bus) printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number); #endif - if (bus->number == 0) { - bus->resource[0] = &pci_ioport_resource; - bus->resource[1] = &pci_iomem_resource; - } - pci_read_bridge_bases(bus); if (bus->number == 0) { @@ -357,6 +352,7 @@ void __init pcibios_fixup_bus(struct pci_bus *bus) int __init pcibios_init(void) { struct pci_ops *dir = NULL; + LIST_HEAD(resources); if (!mb93090_mb00_detected) return -ENXIO; @@ -420,7 +416,10 @@ int __init pcibios_init(void) } printk("PCI: Probing PCI hardware\n"); - pci_root_bus = pci_scan_bus(0, pci_root_ops, NULL); + pci_add_resource(&resources, &pci_ioport_resource); + pci_add_resource(&resources, &pci_iomem_resource); + pci_root_bus = pci_scan_root_bus(NULL, 0, pci_root_ops, NULL, + &resources); pcibios_irq_init(); pcibios_fixup_peer_bridges(); diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index d1f377f5d3b6..56e890df5053 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -4,6 +4,7 @@ config H8300 select HAVE_IDE select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW + select GENERIC_CPU_DEVICES config SYMBOL_PREFIX string diff --git a/arch/h8300/include/asm/ipcbuf.h b/arch/h8300/include/asm/ipcbuf.h index 2cd1ebcc109d..84c7e51cb6d0 100644 --- a/arch/h8300/include/asm/ipcbuf.h +++ b/arch/h8300/include/asm/ipcbuf.h @@ -1,29 +1 @@ -#ifndef __H8300_IPCBUF_H__ -#define __H8300_IPCBUF_H__ - -/* - * The user_ipc_perm structure for H8/300 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __H8300_IPCBUF_H__ */ +#include <asm-generic/ipcbuf.h> diff --git a/arch/h8300/include/asm/pci.h b/arch/h8300/include/asm/pci.h index cc9762091c0a..0b2acaa3dd84 100644 --- a/arch/h8300/include/asm/pci.h +++ b/arch/h8300/include/asm/pci.h @@ -9,11 +9,6 @@ #define pcibios_assign_all_busses() 0 -static inline void pcibios_set_master(struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} - static inline void pcibios_penalize_isa_irq(int irq, int active) { /* We don't do dynamic PCI IRQ allocation */ diff --git a/arch/h8300/include/asm/socket.h b/arch/h8300/include/asm/socket.h index 04c0f4596eb5..cf1daab6f27e 100644 --- a/arch/h8300/include/asm/socket.h +++ b/arch/h8300/include/asm/socket.h @@ -62,4 +62,7 @@ #define SO_RXQ_OVFL 40 +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS + #endif /* _ASM_SOCKET_H */ diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h index d6f1784bfdee..9c126e0c09aa 100644 --- a/arch/h8300/include/asm/thread_info.h +++ b/arch/h8300/include/asm/thread_info.h @@ -90,7 +90,6 @@ static inline struct thread_info *current_thread_info(void) #define TIF_MEMDIE 4 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ #define TIF_NOTIFY_RESUME 6 /* callback before returning to user */ -#define TIF_FREEZE 16 /* is freezing for suspend */ /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) @@ -99,7 +98,6 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) #define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) -#define _TIF_FREEZE (1<<TIF_FREEZE) #define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ diff --git a/arch/h8300/include/asm/types.h b/arch/h8300/include/asm/types.h index bb2c91a3522e..07257d9487d8 100644 --- a/arch/h8300/include/asm/types.h +++ b/arch/h8300/include/asm/types.h @@ -3,27 +3,10 @@ #include <asm-generic/int-ll64.h> -#if !defined(__ASSEMBLY__) - -/* - * This file is never included by application software unless - * explicitly requested (e.g., via linux/types.h) in which case the - * application is Linux specific so (user-) name space pollution is - * not a major issue. However, for interoperability, libraries still - * need to be careful to avoid a name clashes. - */ - -typedef unsigned short umode_t; - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ #ifdef __KERNEL__ #define BITS_PER_LONG 32 #endif /* __KERNEL__ */ -#endif /* __ASSEMBLY__ */ - #endif /* _H8300_TYPES_H */ diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig index 02513c2dd5ec..9059e3905887 100644 --- a/arch/hexagon/Kconfig +++ b/arch/hexagon/Kconfig @@ -26,6 +26,7 @@ config HEXAGON select HAVE_ARCH_KGDB select HAVE_ARCH_TRACEHOOK select NO_IOPORT + select GENERIC_IOMAP # mostly generic routines, with some accelerated ones ---help--- Qualcomm Hexagon is a processor architecture designed for high @@ -73,9 +74,6 @@ config GENERIC_CSUM config GENERIC_IRQ_PROBE def_bool y -config GENERIC_IOMAP - def_bool y - #config ZONE_DMA # bool # default y diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 27489b6dd533..bd7266903bf8 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -23,12 +23,16 @@ config IA64 select HAVE_ARCH_TRACEHOOK select HAVE_DMA_API_DEBUG select HAVE_GENERIC_HARDIRQS + select HAVE_MEMBLOCK + select HAVE_MEMBLOCK_NODE_MAP + select ARCH_DISCARD_MEMBLOCK select GENERIC_IRQ_PROBE select GENERIC_PENDING_IRQ if SMP select IRQ_PER_CPU select GENERIC_IRQ_SHOW select ARCH_WANT_OPTIONAL_GPIOLIB select ARCH_HAVE_NMI_SAFE_CMPXCHG + select GENERIC_IOMAP default y help The Itanium Processor Family is Intel's 64-bit successor to @@ -102,10 +106,6 @@ config EFI bool default y -config GENERIC_IOMAP - bool - default y - config ARCH_CLOCKSOURCE_DATA def_bool y @@ -474,9 +474,6 @@ config NODES_SHIFT MAX_NUMNODES will be 2^(This value). If in doubt, use the default. -config ARCH_POPULATES_NODE_MAP - def_bool y - # VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent. # VIRTUAL_MEM_MAP has been retained for historical reasons. config VIRTUAL_MEM_MAP diff --git a/arch/ia64/include/asm/cputime.h b/arch/ia64/include/asm/cputime.h index 6073b187528a..3deac956d325 100644 --- a/arch/ia64/include/asm/cputime.h +++ b/arch/ia64/include/asm/cputime.h @@ -26,59 +26,53 @@ #include <linux/jiffies.h> #include <asm/processor.h> -typedef u64 cputime_t; -typedef u64 cputime64_t; +typedef u64 __nocast cputime_t; +typedef u64 __nocast cputime64_t; -#define cputime_zero ((cputime_t)0) #define cputime_one_jiffy jiffies_to_cputime(1) -#define cputime_max ((~((cputime_t)0) >> 1) - 1) -#define cputime_add(__a, __b) ((__a) + (__b)) -#define cputime_sub(__a, __b) ((__a) - (__b)) -#define cputime_div(__a, __n) ((__a) / (__n)) -#define cputime_halve(__a) ((__a) >> 1) -#define cputime_eq(__a, __b) ((__a) == (__b)) -#define cputime_gt(__a, __b) ((__a) > (__b)) -#define cputime_ge(__a, __b) ((__a) >= (__b)) -#define cputime_lt(__a, __b) ((__a) < (__b)) -#define cputime_le(__a, __b) ((__a) <= (__b)) - -#define cputime64_zero ((cputime64_t)0) -#define cputime64_add(__a, __b) ((__a) + (__b)) -#define cputime64_sub(__a, __b) ((__a) - (__b)) -#define cputime_to_cputime64(__ct) (__ct) /* * Convert cputime <-> jiffies (HZ) */ -#define cputime_to_jiffies(__ct) ((__ct) / (NSEC_PER_SEC / HZ)) -#define jiffies_to_cputime(__jif) ((__jif) * (NSEC_PER_SEC / HZ)) -#define cputime64_to_jiffies64(__ct) ((__ct) / (NSEC_PER_SEC / HZ)) -#define jiffies64_to_cputime64(__jif) ((__jif) * (NSEC_PER_SEC / HZ)) +#define cputime_to_jiffies(__ct) \ + ((__force u64)(__ct) / (NSEC_PER_SEC / HZ)) +#define jiffies_to_cputime(__jif) \ + (__force cputime_t)((__jif) * (NSEC_PER_SEC / HZ)) +#define cputime64_to_jiffies64(__ct) \ + ((__force u64)(__ct) / (NSEC_PER_SEC / HZ)) +#define jiffies64_to_cputime64(__jif) \ + (__force cputime64_t)((__jif) * (NSEC_PER_SEC / HZ)) /* * Convert cputime <-> microseconds */ -#define cputime_to_usecs(__ct) ((__ct) / NSEC_PER_USEC) -#define usecs_to_cputime(__usecs) ((__usecs) * NSEC_PER_USEC) +#define cputime_to_usecs(__ct) \ + ((__force u64)(__ct) / NSEC_PER_USEC) +#define usecs_to_cputime(__usecs) \ + (__force cputime_t)((__usecs) * NSEC_PER_USEC) +#define usecs_to_cputime64(__usecs) \ + (__force cputime64_t)((__usecs) * NSEC_PER_USEC) /* * Convert cputime <-> seconds */ -#define cputime_to_secs(__ct) ((__ct) / NSEC_PER_SEC) -#define secs_to_cputime(__secs) ((__secs) * NSEC_PER_SEC) +#define cputime_to_secs(__ct) \ + ((__force u64)(__ct) / NSEC_PER_SEC) +#define secs_to_cputime(__secs) \ + (__force cputime_t)((__secs) * NSEC_PER_SEC) /* * Convert cputime <-> timespec (nsec) */ static inline cputime_t timespec_to_cputime(const struct timespec *val) { - cputime_t ret = val->tv_sec * NSEC_PER_SEC; - return (ret + val->tv_nsec); + u64 ret = val->tv_sec * NSEC_PER_SEC + val->tv_nsec; + return (__force cputime_t) ret; } static inline void cputime_to_timespec(const cputime_t ct, struct timespec *val) { - val->tv_sec = ct / NSEC_PER_SEC; - val->tv_nsec = ct % NSEC_PER_SEC; + val->tv_sec = (__force u64) ct / NSEC_PER_SEC; + val->tv_nsec = (__force u64) ct % NSEC_PER_SEC; } /* @@ -86,25 +80,28 @@ static inline void cputime_to_timespec(const cputime_t ct, struct timespec *val) */ static inline cputime_t timeval_to_cputime(struct timeval *val) { - cputime_t ret = val->tv_sec * NSEC_PER_SEC; - return (ret + val->tv_usec * NSEC_PER_USEC); + u64 ret = val->tv_sec * NSEC_PER_SEC + val->tv_usec * NSEC_PER_USEC; + return (__force cputime_t) ret; } static inline void cputime_to_timeval(const cputime_t ct, struct timeval *val) { - val->tv_sec = ct / NSEC_PER_SEC; - val->tv_usec = (ct % NSEC_PER_SEC) / NSEC_PER_USEC; + val->tv_sec = (__force u64) ct / NSEC_PER_SEC; + val->tv_usec = ((__force u64) ct % NSEC_PER_SEC) / NSEC_PER_USEC; } /* * Convert cputime <-> clock (USER_HZ) */ -#define cputime_to_clock_t(__ct) ((__ct) / (NSEC_PER_SEC / USER_HZ)) -#define clock_t_to_cputime(__x) ((__x) * (NSEC_PER_SEC / USER_HZ)) +#define cputime_to_clock_t(__ct) \ + ((__force u64)(__ct) / (NSEC_PER_SEC / USER_HZ)) +#define clock_t_to_cputime(__x) \ + (__force cputime_t)((__x) * (NSEC_PER_SEC / USER_HZ)) /* * Convert cputime64 to clock. */ -#define cputime64_to_clock_t(__ct) cputime_to_clock_t((cputime_t)__ct) +#define cputime64_to_clock_t(__ct) \ + cputime_to_clock_t((__force cputime_t)__ct) #endif /* CONFIG_VIRT_CPU_ACCOUNTING */ #endif /* __IA64_CPUTIME_H */ diff --git a/arch/ia64/include/asm/iommu.h b/arch/ia64/include/asm/iommu.h index 105c93b00b1b..b6a809fa2995 100644 --- a/arch/ia64/include/asm/iommu.h +++ b/arch/ia64/include/asm/iommu.h @@ -11,10 +11,12 @@ extern void no_iommu_init(void); extern int force_iommu, no_iommu; extern int iommu_pass_through; extern int iommu_detected; +extern int iommu_group_mf; #else #define iommu_pass_through (0) #define no_iommu (1) #define iommu_detected (0) +#define iommu_group_mf (0) #endif extern void iommu_dma_init(void); extern void machvec_init(const char *name); diff --git a/arch/ia64/include/asm/ipcbuf.h b/arch/ia64/include/asm/ipcbuf.h index 079899ae7d32..84c7e51cb6d0 100644 --- a/arch/ia64/include/asm/ipcbuf.h +++ b/arch/ia64/include/asm/ipcbuf.h @@ -1,28 +1 @@ -#ifndef _ASM_IA64_IPCBUF_H -#define _ASM_IA64_IPCBUF_H - -/* - * The ipc64_perm structure for IA-64 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit seq - * - 2 miscellaneous 64-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid_t uid; - __kernel_gid_t gid; - __kernel_uid_t cuid; - __kernel_gid_t cgid; - __kernel_mode_t mode; - unsigned short seq; - unsigned short __pad1; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _ASM_IA64_IPCBUF_H */ +#include <asm-generic/ipcbuf.h> diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h index 127dd7be346a..279b38ae74aa 100644 --- a/arch/ia64/include/asm/pci.h +++ b/arch/ia64/include/asm/pci.h @@ -43,12 +43,6 @@ extern unsigned long ia64_max_iommu_merge_mask; #define PCI_DMA_BUS_IS_PHYS (ia64_max_iommu_merge_mask == ~0UL) static inline void -pcibios_set_master (struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} - -static inline void pcibios_penalize_isa_irq (int irq, int active) { /* We don't do dynamic PCI IRQ allocation */ diff --git a/arch/ia64/include/asm/socket.h b/arch/ia64/include/asm/socket.h index 51427eaa51ba..4b03664e3fb5 100644 --- a/arch/ia64/include/asm/socket.h +++ b/arch/ia64/include/asm/socket.h @@ -71,4 +71,7 @@ #define SO_RXQ_OVFL 40 +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS + #endif /* _ASM_IA64_SOCKET_H */ diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h index ff0cc84e7bcc..e054bcc4273c 100644 --- a/arch/ia64/include/asm/thread_info.h +++ b/arch/ia64/include/asm/thread_info.h @@ -113,7 +113,6 @@ struct thread_info { #define TIF_MEMDIE 17 /* is terminating due to OOM killer */ #define TIF_MCA_INIT 18 /* this task is processing MCA or INIT */ #define TIF_DB_DISABLED 19 /* debug trap disabled for fsyscall */ -#define TIF_FREEZE 20 /* is freezing for suspend */ #define TIF_RESTORE_RSE 21 /* user RBS is newer than kernel RBS */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) @@ -126,7 +125,6 @@ struct thread_info { #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_MCA_INIT (1 << TIF_MCA_INIT) #define _TIF_DB_DISABLED (1 << TIF_DB_DISABLED) -#define _TIF_FREEZE (1 << TIF_FREEZE) #define _TIF_RESTORE_RSE (1 << TIF_RESTORE_RSE) /* "work to do on user-return" bits */ diff --git a/arch/ia64/include/asm/types.h b/arch/ia64/include/asm/types.h index 82b3939d2718..3f5b122d9975 100644 --- a/arch/ia64/include/asm/types.h +++ b/arch/ia64/include/asm/types.h @@ -28,8 +28,6 @@ # define __IA64_UL(x) ((unsigned long)(x)) # define __IA64_UL_CONST(x) x##UL -typedef unsigned int umode_t; - /* * These aren't exported outside the kernel to avoid name space clashes */ diff --git a/arch/ia64/include/asm/xen/interface.h b/arch/ia64/include/asm/xen/interface.h index 1d2427d116e3..fbb519828aa1 100644 --- a/arch/ia64/include/asm/xen/interface.h +++ b/arch/ia64/include/asm/xen/interface.h @@ -71,7 +71,7 @@ __DEFINE_GUEST_HANDLE(uchar, unsigned char); __DEFINE_GUEST_HANDLE(uint, unsigned int); __DEFINE_GUEST_HANDLE(ulong, unsigned long); -__DEFINE_GUEST_HANDLE(u64, unsigned long); + DEFINE_GUEST_HANDLE(char); DEFINE_GUEST_HANDLE(int); DEFINE_GUEST_HANDLE(long); diff --git a/arch/ia64/kernel/err_inject.c b/arch/ia64/kernel/err_inject.c index c539c689493b..2d67317a1ec2 100644 --- a/arch/ia64/kernel/err_inject.c +++ b/arch/ia64/kernel/err_inject.c @@ -24,7 +24,7 @@ * Copyright (C) 2006, Intel Corp. All rights reserved. * */ -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/cpu.h> @@ -35,10 +35,10 @@ #define ERR_DATA_BUFFER_SIZE 3 // Three 8-byte; #define define_one_ro(name) \ -static SYSDEV_ATTR(name, 0444, show_##name, NULL) +static DEVICE_ATTR(name, 0444, show_##name, NULL) #define define_one_rw(name) \ -static SYSDEV_ATTR(name, 0644, show_##name, store_##name) +static DEVICE_ATTR(name, 0644, show_##name, store_##name) static u64 call_start[NR_CPUS]; static u64 phys_addr[NR_CPUS]; @@ -55,7 +55,7 @@ static u64 resources[NR_CPUS]; #define show(name) \ static ssize_t \ -show_##name(struct sys_device *dev, struct sysdev_attribute *attr, \ +show_##name(struct device *dev, struct device_attribute *attr, \ char *buf) \ { \ u32 cpu=dev->id; \ @@ -64,7 +64,7 @@ show_##name(struct sys_device *dev, struct sysdev_attribute *attr, \ #define store(name) \ static ssize_t \ -store_##name(struct sys_device *dev, struct sysdev_attribute *attr, \ +store_##name(struct device *dev, struct device_attribute *attr, \ const char *buf, size_t size) \ { \ unsigned int cpu=dev->id; \ @@ -78,7 +78,7 @@ show(call_start) * processor. The cpu number in driver is only used for storing data. */ static ssize_t -store_call_start(struct sys_device *dev, struct sysdev_attribute *attr, +store_call_start(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) { unsigned int cpu=dev->id; @@ -127,7 +127,7 @@ show(err_type_info) store(err_type_info) static ssize_t -show_virtual_to_phys(struct sys_device *dev, struct sysdev_attribute *attr, +show_virtual_to_phys(struct device *dev, struct device_attribute *attr, char *buf) { unsigned int cpu=dev->id; @@ -135,7 +135,7 @@ show_virtual_to_phys(struct sys_device *dev, struct sysdev_attribute *attr, } static ssize_t -store_virtual_to_phys(struct sys_device *dev, struct sysdev_attribute *attr, +store_virtual_to_phys(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) { unsigned int cpu=dev->id; @@ -159,8 +159,8 @@ show(err_struct_info) store(err_struct_info) static ssize_t -show_err_data_buffer(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +show_err_data_buffer(struct device *dev, + struct device_attribute *attr, char *buf) { unsigned int cpu=dev->id; @@ -171,8 +171,8 @@ show_err_data_buffer(struct sys_device *dev, } static ssize_t -store_err_data_buffer(struct sys_device *dev, - struct sysdev_attribute *attr, +store_err_data_buffer(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) { unsigned int cpu=dev->id; @@ -209,14 +209,14 @@ define_one_ro(capabilities); define_one_ro(resources); static struct attribute *default_attrs[] = { - &attr_call_start.attr, - &attr_virtual_to_phys.attr, - &attr_err_type_info.attr, - &attr_err_struct_info.attr, - &attr_err_data_buffer.attr, - &attr_status.attr, - &attr_capabilities.attr, - &attr_resources.attr, + &dev_attr_call_start.attr, + &dev_attr_virtual_to_phys.attr, + &dev_attr_err_type_info.attr, + &dev_attr_err_struct_info.attr, + &dev_attr_err_data_buffer.attr, + &dev_attr_status.attr, + &dev_attr_capabilities.attr, + &dev_attr_resources.attr, NULL }; @@ -225,12 +225,12 @@ static struct attribute_group err_inject_attr_group = { .name = "err_inject" }; /* Add/Remove err_inject interface for CPU device */ -static int __cpuinit err_inject_add_dev(struct sys_device * sys_dev) +static int __cpuinit err_inject_add_dev(struct device * sys_dev) { return sysfs_create_group(&sys_dev->kobj, &err_inject_attr_group); } -static int __cpuinit err_inject_remove_dev(struct sys_device * sys_dev) +static int __cpuinit err_inject_remove_dev(struct device * sys_dev) { sysfs_remove_group(&sys_dev->kobj, &err_inject_attr_group); return 0; @@ -239,9 +239,9 @@ static int __cpuinit err_inject_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; - struct sys_device *sys_dev; + struct device *sys_dev; - sys_dev = get_cpu_sysdev(cpu); + sys_dev = get_cpu_device(cpu); switch (action) { case CPU_ONLINE: case CPU_ONLINE_FROZEN: @@ -283,13 +283,13 @@ static void __exit err_inject_exit(void) { int i; - struct sys_device *sys_dev; + struct device *sys_dev; #ifdef ERR_INJ_DEBUG printk(KERN_INFO "Exit error injection driver.\n"); #endif for_each_online_cpu(i) { - sys_dev = get_cpu_sysdev(i); + sys_dev = get_cpu_device(i); sysfs_remove_group(&sys_dev->kobj, &err_inject_attr_group); } unregister_hotcpu_notifier(&err_inject_cpu_notifier); diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c index c16162c70860..eb1175720050 100644 --- a/arch/ia64/kernel/pci-dma.c +++ b/arch/ia64/kernel/pci-dma.c @@ -33,6 +33,7 @@ int force_iommu __read_mostly; #endif int iommu_pass_through; +int iommu_group_mf; /* Dummy device used for NULL arguments (normally ISA). Better would be probably a smaller DMA mask, but this is bug-to-bug compatible diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 89accc626b86..b2c65e034f5d 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -2228,7 +2228,7 @@ pfm_alloc_file(pfm_context_t *ctx) /* * allocate a new dcache entry */ - path.dentry = d_alloc(pfmfs_mnt->mnt_sb->s_root, &this); + path.dentry = d_alloc(pfmfs_mnt->mnt_root, &this); if (!path.dentry) { iput(inode); return ERR_PTR(-ENOMEM); diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 5e2c72498c51..cd57d7312de0 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -220,6 +220,23 @@ sort_regions (struct rsvd_region *rsvd_region, int max) } } +/* merge overlaps */ +static int __init +merge_regions (struct rsvd_region *rsvd_region, int max) +{ + int i; + for (i = 1; i < max; ++i) { + if (rsvd_region[i].start >= rsvd_region[i-1].end) + continue; + if (rsvd_region[i].end > rsvd_region[i-1].end) + rsvd_region[i-1].end = rsvd_region[i].end; + --max; + memmove(&rsvd_region[i], &rsvd_region[i+1], + (max - i) * sizeof(struct rsvd_region)); + } + return max; +} + /* * Request address space for all standard resources */ @@ -270,6 +287,7 @@ static void __init setup_crashkernel(unsigned long total, int *n) if (ret == 0 && size > 0) { if (!base) { sort_regions(rsvd_region, *n); + *n = merge_regions(rsvd_region, *n); base = kdump_find_rsvd_region(size, rsvd_region, *n); } @@ -373,6 +391,7 @@ reserve_memory (void) BUG_ON(IA64_MAX_RSVD_REGIONS + 1 < n); sort_regions(rsvd_region, num_rsvd_regions); + num_rsvd_regions = merge_regions(rsvd_region, num_rsvd_regions); } diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index 9be1f11a01d9..9deb21dbf629 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -350,7 +350,7 @@ static int __cpuinit cpu_cache_sysfs_init(unsigned int cpu) } /* Add cache interface for CPU device */ -static int __cpuinit cache_add_dev(struct sys_device * sys_dev) +static int __cpuinit cache_add_dev(struct device * sys_dev) { unsigned int cpu = sys_dev->id; unsigned long i, j; @@ -400,7 +400,7 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) } /* Remove cache interface for CPU device */ -static int __cpuinit cache_remove_dev(struct sys_device * sys_dev) +static int __cpuinit cache_remove_dev(struct device * sys_dev) { unsigned int cpu = sys_dev->id; unsigned long i; @@ -428,9 +428,9 @@ static int __cpuinit cache_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; - struct sys_device *sys_dev; + struct device *sys_dev; - sys_dev = get_cpu_sysdev(cpu); + sys_dev = get_cpu_device(cpu); switch (action) { case CPU_ONLINE: case CPU_ONLINE_FROZEN: @@ -454,7 +454,7 @@ static int __init cache_sysfs_init(void) int i; for_each_online_cpu(i) { - struct sys_device *sys_dev = get_cpu_sysdev((unsigned int)i); + struct device *sys_dev = get_cpu_device((unsigned int)i); cache_add_dev(sys_dev); } diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index 43f4c92816ef..405052002493 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -774,13 +774,13 @@ struct kvm *kvm_arch_alloc_vm(void) return kvm; } -struct kvm_io_range { +struct kvm_ia64_io_range { unsigned long start; unsigned long size; unsigned long type; }; -static const struct kvm_io_range io_ranges[] = { +static const struct kvm_ia64_io_range io_ranges[] = { {VGA_IO_START, VGA_IO_SIZE, GPFN_FRAME_BUFFER}, {MMIO_START, MMIO_SIZE, GPFN_LOW_MMIO}, {LEGACY_IO_START, LEGACY_IO_SIZE, GPFN_LEGACY_IO}, @@ -1366,14 +1366,12 @@ static void kvm_release_vm_pages(struct kvm *kvm) { struct kvm_memslots *slots; struct kvm_memory_slot *memslot; - int i, j; + int j; unsigned long base_gfn; slots = kvm_memslots(kvm); - for (i = 0; i < slots->nmemslots; i++) { - memslot = &slots->memslots[i]; + kvm_for_each_memslot(memslot, slots) { base_gfn = memslot->base_gfn; - for (j = 0; j < memslot->npages; j++) { if (memslot->rmap[j]) put_page((struct page *)memslot->rmap[j]); @@ -1820,7 +1818,7 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, if (log->slot >= KVM_MEMORY_SLOTS) goto out; - memslot = &kvm->memslots->memslots[log->slot]; + memslot = id_to_memslot(kvm->memslots, log->slot); r = -ENOENT; if (!memslot->dirty_bitmap) goto out; diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index f114a3b14c6a..1516d1dc11fd 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -16,6 +16,7 @@ */ #include <linux/bootmem.h> #include <linux/efi.h> +#include <linux/memblock.h> #include <linux/mm.h> #include <linux/nmi.h> #include <linux/swap.h> @@ -348,7 +349,7 @@ paging_init (void) printk("Virtual mem_map starts at 0x%p\n", mem_map); } #else /* !CONFIG_VIRTUAL_MEM_MAP */ - add_active_range(0, 0, max_low_pfn); + memblock_add_node(0, PFN_PHYS(max_low_pfn), 0); free_area_init_nodes(max_zone_pfns); #endif /* !CONFIG_VIRTUAL_MEM_MAP */ zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page)); diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 00cb0e26c64e..13df239dbed1 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -10,6 +10,7 @@ #include <linux/bootmem.h> #include <linux/efi.h> #include <linux/elf.h> +#include <linux/memblock.h> #include <linux/mm.h> #include <linux/mmzone.h> #include <linux/module.h> @@ -557,8 +558,7 @@ int __init register_active_ranges(u64 start, u64 len, int nid) #endif if (start < end) - add_active_range(nid, __pa(start) >> PAGE_SHIFT, - __pa(end) >> PAGE_SHIFT); + memblock_add_node(__pa(start), end - start, nid); return 0; } diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 2c27714d7b78..f82f5d4b65fd 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -134,6 +134,7 @@ alloc_pci_controller (int seg) struct pci_root_info { struct acpi_device *bridge; struct pci_controller *controller; + struct list_head resources; char *name; }; @@ -315,24 +316,13 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data) &window->resource); } - return AE_OK; -} - -static void __devinit -pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl) -{ - int i; + /* HP's firmware has a hack to work around a Windows bug. + * Ignore these tiny memory ranges */ + if (!((window->resource.flags & IORESOURCE_MEM) && + (window->resource.end - window->resource.start < 16))) + pci_add_resource(&info->resources, &window->resource); - pci_bus_remove_resources(bus); - for (i = 0; i < ctrl->windows; i++) { - struct resource *res = &ctrl->window[i].resource; - /* HP's firmware has a hack to work around a Windows bug. - * Ignore these tiny memory ranges */ - if ((res->flags & IORESOURCE_MEM) && - (res->end - res->start < 16)) - continue; - pci_bus_add_resource(bus, res, 0); - } + return AE_OK; } struct pci_bus * __devinit @@ -343,6 +333,7 @@ pci_acpi_scan_root(struct acpi_pci_root *root) int bus = root->secondary.start; struct pci_controller *controller; unsigned int windows = 0; + struct pci_root_info info; struct pci_bus *pbus; char *name; int pxm; @@ -359,11 +350,10 @@ pci_acpi_scan_root(struct acpi_pci_root *root) controller->node = pxm_to_node(pxm); #endif + INIT_LIST_HEAD(&info.resources); acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_window, &windows); if (windows) { - struct pci_root_info info; - controller->window = kmalloc_node(sizeof(*controller->window) * windows, GFP_KERNEL, controller->node); @@ -387,8 +377,14 @@ pci_acpi_scan_root(struct acpi_pci_root *root) * should handle the case here, but it appears that IA64 hasn't * such quirk. So we just ignore the case now. */ - pbus = pci_scan_bus_parented(NULL, bus, &pci_root_ops, controller); + pbus = pci_create_root_bus(NULL, bus, &pci_root_ops, controller, + &info.resources); + if (!pbus) { + pci_free_resource_list(&info.resources); + return NULL; + } + pbus->subordinate = pci_scan_child_bus(pbus); return pbus; out3: @@ -504,14 +500,15 @@ pcibios_fixup_bus (struct pci_bus *b) if (b->self) { pci_read_bridge_bases(b); pcibios_fixup_bridge_resources(b->self); - } else { - pcibios_setup_root_windows(b, b->sysdata); } list_for_each_entry(dev, &b->devices, bus_list) pcibios_fixup_device_resources(dev); platform_pci_fixup_bus(b); +} - return; +void pcibios_set_master (struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ } void __devinit diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index 485c42d97e83..dfac09ab027a 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -150,12 +150,11 @@ struct sn_irq_info *sn_retarget_vector(struct sn_irq_info *sn_irq_info, * PROM does not support SAL_INTR_REDIRECT, or it failed. * Revert to old method. */ - new_irq_info = kmalloc(sizeof(struct sn_irq_info), GFP_ATOMIC); + new_irq_info = kmemdup(sn_irq_info, sizeof(struct sn_irq_info), + GFP_ATOMIC); if (new_irq_info == NULL) return NULL; - memcpy(new_irq_info, sn_irq_info, sizeof(struct sn_irq_info)); - /* Free the old PROM new_irq_info structure */ sn_intr_free(local_nasid, local_widget, new_irq_info); unregister_intr_pda(new_irq_info); diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c index 5698f29d5add..8886a0bc4a11 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c @@ -127,12 +127,11 @@ pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont * Allocate kernel bus soft and copy from prom. */ - soft = kmalloc(sizeof(struct pcibus_info), GFP_KERNEL); + soft = kmemdup(prom_bussoft, sizeof(struct pcibus_info), GFP_KERNEL); if (!soft) { return NULL; } - memcpy(soft, prom_bussoft, sizeof(struct pcibus_info)); soft->pbi_buscommon.bs_base = (unsigned long) ioremap(REGION_OFFSET(soft->pbi_buscommon.bs_base), sizeof(struct pic)); diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c index 642451e770ea..e77c477245fd 100644 --- a/arch/ia64/sn/pci/tioca_provider.c +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -600,11 +600,11 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont * Allocate kernel bus soft and copy from prom. */ - tioca_common = kzalloc(sizeof(struct tioca_common), GFP_KERNEL); + tioca_common = kmemdup(prom_bussoft, sizeof(struct tioca_common), + GFP_KERNEL); if (!tioca_common) return NULL; - memcpy(tioca_common, prom_bussoft, sizeof(struct tioca_common)); tioca_common->ca_common.bs_base = (unsigned long) ioremap(REGION_OFFSET(tioca_common->ca_common.bs_base), sizeof(struct tioca_common)); diff --git a/arch/m32r/include/asm/ipcbuf.h b/arch/m32r/include/asm/ipcbuf.h index 8d2d7c8ffdb0..84c7e51cb6d0 100644 --- a/arch/m32r/include/asm/ipcbuf.h +++ b/arch/m32r/include/asm/ipcbuf.h @@ -1,29 +1 @@ -#ifndef _ASM_M32R_IPCBUF_H -#define _ASM_M32R_IPCBUF_H - -/* - * The ipc64_perm structure for m32r architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _ASM_M32R_IPCBUF_H */ +#include <asm-generic/ipcbuf.h> diff --git a/arch/m32r/include/asm/socket.h b/arch/m32r/include/asm/socket.h index 469787c30098..e8b8c5bb053c 100644 --- a/arch/m32r/include/asm/socket.h +++ b/arch/m32r/include/asm/socket.h @@ -62,4 +62,7 @@ #define SO_RXQ_OVFL 40 +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS + #endif /* _ASM_M32R_SOCKET_H */ diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h index 0227dba44068..bf8fa3c06f4e 100644 --- a/arch/m32r/include/asm/thread_info.h +++ b/arch/m32r/include/asm/thread_info.h @@ -138,7 +138,6 @@ static inline unsigned int get_thread_fault_code(void) #define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ -#define TIF_FREEZE 19 /* is freezing for suspend */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_SIGPENDING (1<<TIF_SIGPENDING) @@ -149,7 +148,6 @@ static inline unsigned int get_thread_fault_code(void) #define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) #define _TIF_USEDFPU (1<<TIF_USEDFPU) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) -#define _TIF_FREEZE (1<<TIF_FREEZE) #define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ #define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */ diff --git a/arch/m32r/include/asm/types.h b/arch/m32r/include/asm/types.h index bd0035597b3b..bb2eeadecf99 100644 --- a/arch/m32r/include/asm/types.h +++ b/arch/m32r/include/asm/types.h @@ -3,12 +3,6 @@ #include <asm-generic/int-ll64.h> -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - /* * These aren't exported outside the kernel to avoid name space clashes */ diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 361d54019bb0..ae413d4a8bb7 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -3,10 +3,10 @@ config M68K default y select HAVE_IDE select HAVE_AOUT if MMU - select GENERIC_ATOMIC64 if MMU select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS + select GENERIC_CPU_DEVICES config RWSEM_GENERIC_SPINLOCK bool @@ -38,15 +38,15 @@ config GENERIC_CALIBRATE_DELAY bool default y -config GENERIC_IOMAP - def_bool MMU +config GENERIC_CSUM + bool config TIME_LOW_RES bool default y config ARCH_USES_GETTIMEOFFSET - def_bool MMU + def_bool MMU && !COLDFIRE config NO_IOPORT def_bool y @@ -61,6 +61,12 @@ config ZONE_DMA config CPU_HAS_NO_BITFIELDS bool +config CPU_HAS_NO_MULDIV64 + bool + +config CPU_HAS_ADDRESS_SPACES + bool + config HZ int default 1000 if CLEOPATRA @@ -73,6 +79,7 @@ source "kernel/Kconfig.freezer" config MMU bool "MMU-based Paged Memory Management Support" default y + select GENERIC_IOMAP help Select if you want MMU-based virtualised addressing space support by paged memory management. If unsure, say 'Y'. @@ -80,9 +87,12 @@ config MMU config MMU_MOTOROLA bool +config MMU_COLDFIRE + bool + config MMU_SUN3 bool - depends on MMU && !MMU_MOTOROLA + depends on MMU && !MMU_MOTOROLA && !MMU_COLDFIRE menu "Platform setup" diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index e632b2d12106..8a9c767125a4 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -1,8 +1,42 @@ comment "Processor Type" +choice + prompt "CPU family support" + default M68KCLASSIC if MMU + default COLDFIRE if !MMU + help + The Freescale (was Motorola) M68K family of processors implements + the full 68000 processor instruction set. + The Freescale ColdFire family of processors is a modern derivitive + of the 68000 processor family. They are mainly targeted at embedded + applications, and are all System-On-Chip (SOC) devices, as opposed + to stand alone CPUs. They implement a subset of the original 68000 + processor instruction set. + If you anticipate running this kernel on a computer with a classic + MC68xxx processor, select M68KCLASSIC. + If you anticipate running this kernel on a computer with a ColdFire + processor, select COLDFIRE. + +config M68KCLASSIC + bool "Classic M68K CPU family support" + +config COLDFIRE + bool "Coldfire CPU family support" + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select CPU_HAS_NO_BITFIELDS + select CPU_HAS_NO_MULDIV64 + select GENERIC_CSUM + +endchoice + +if M68KCLASSIC + config M68000 bool select CPU_HAS_NO_BITFIELDS + select CPU_HAS_NO_MULDIV64 + select GENERIC_CSUM help The Freescale (was Motorola) 68000 CPU is the first generation of the well known M68K family of processors. The CPU core as well as @@ -18,21 +52,11 @@ config MCPU32 based on the 68020 processor. For the most part it is used in System-On-Chip parts, and does not contain a paging MMU. -config COLDFIRE - bool - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - select CPU_HAS_NO_BITFIELDS - help - The Freescale ColdFire family of processors is a modern derivitive - of the 68000 processor family. They are mainly targeted at embedded - applications, and are all System-On-Chip (SOC) devices, as opposed - to stand alone CPUs. They implement a subset of the original 68000 - processor instruction set. - config M68020 bool "68020 support" depends on MMU + select GENERIC_ATOMIC64 + select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68020 processor, say Y. Otherwise, say N. Note that the 68020 requires a @@ -42,6 +66,8 @@ config M68020 config M68030 bool "68030 support" depends on MMU && !MMU_SUN3 + select GENERIC_ATOMIC64 + select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68030 processor, say Y. Otherwise, say N. Note that a MC68EC030 will not @@ -50,6 +76,8 @@ config M68030 config M68040 bool "68040 support" depends on MMU && !MMU_SUN3 + select GENERIC_ATOMIC64 + select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68LC040 or MC68040 processor, say Y. Otherwise, say N. Note that an @@ -59,6 +87,8 @@ config M68040 config M68060 bool "68060 support" depends on MMU && !MMU_SUN3 + select GENERIC_ATOMIC64 + select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68060 processor, say Y. Otherwise, say N. @@ -91,10 +121,13 @@ config M68360 help Motorola 68360 processor support. +endif # M68KCLASSIC + +if COLDFIRE + config M5206 bool "MCF5206" depends on !MMU - select COLDFIRE select COLDFIRE_SW_A7 select HAVE_MBAR help @@ -103,7 +136,6 @@ config M5206 config M5206e bool "MCF5206e" depends on !MMU - select COLDFIRE select COLDFIRE_SW_A7 select HAVE_MBAR help @@ -112,7 +144,6 @@ config M5206e config M520x bool "MCF520x" depends on !MMU - select COLDFIRE select GENERIC_CLOCKEVENTS select HAVE_CACHE_SPLIT help @@ -121,7 +152,6 @@ config M520x config M523x bool "MCF523x" depends on !MMU - select COLDFIRE select GENERIC_CLOCKEVENTS select HAVE_CACHE_SPLIT select HAVE_IPSBAR @@ -131,7 +161,6 @@ config M523x config M5249 bool "MCF5249" depends on !MMU - select COLDFIRE select COLDFIRE_SW_A7 select HAVE_MBAR help @@ -143,7 +172,6 @@ config M527x config M5271 bool "MCF5271" depends on !MMU - select COLDFIRE select M527x select HAVE_CACHE_SPLIT select HAVE_IPSBAR @@ -154,7 +182,6 @@ config M5271 config M5272 bool "MCF5272" depends on !MMU - select COLDFIRE select COLDFIRE_SW_A7 select HAVE_MBAR help @@ -163,7 +190,6 @@ config M5272 config M5275 bool "MCF5275" depends on !MMU - select COLDFIRE select M527x select HAVE_CACHE_SPLIT select HAVE_IPSBAR @@ -174,7 +200,6 @@ config M5275 config M528x bool "MCF528x" depends on !MMU - select COLDFIRE select GENERIC_CLOCKEVENTS select HAVE_CACHE_SPLIT select HAVE_IPSBAR @@ -184,7 +209,6 @@ config M528x config M5307 bool "MCF5307" depends on !MMU - select COLDFIRE select COLDFIRE_SW_A7 select HAVE_CACHE_CB select HAVE_MBAR @@ -194,7 +218,6 @@ config M5307 config M532x bool "MCF532x" depends on !MMU - select COLDFIRE select HAVE_CACHE_CB help Freescale (Motorola) ColdFire 532x processor support. @@ -202,7 +225,6 @@ config M532x config M5407 bool "MCF5407" depends on !MMU - select COLDFIRE select COLDFIRE_SW_A7 select HAVE_CACHE_CB select HAVE_MBAR @@ -214,9 +236,8 @@ config M54xx config M547x bool "MCF547x" - depends on !MMU - select COLDFIRE select M54xx + select MMU_COLDFIRE if MMU select HAVE_CACHE_CB select HAVE_MBAR help @@ -224,14 +245,15 @@ config M547x config M548x bool "MCF548x" - depends on !MMU - select COLDFIRE + select MMU_COLDFIRE if MMU select M54xx select HAVE_CACHE_CB select HAVE_MBAR help Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support. +endif # COLDFIRE + comment "Processor Specific Options" diff --git a/arch/m68k/Kconfig.debug b/arch/m68k/Kconfig.debug index 2bdb1b01115c..87233acef18b 100644 --- a/arch/m68k/Kconfig.debug +++ b/arch/m68k/Kconfig.debug @@ -2,6 +2,25 @@ menu "Kernel hacking" source "lib/Kconfig.debug" +config BOOTPARAM + bool 'Compiled-in Kernel Boot Parameter' + +config BOOTPARAM_STRING + string 'Kernel Boot Parameter' + default 'console=ttyS0,19200' + depends on BOOTPARAM + +config EARLY_PRINTK + bool "Early printk" if EMBEDDED + depends on MVME16x || MAC + default y + help + Write kernel log output directly to a serial port. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. + You should normally say N here, unless you want to debug such a crash. + if !MMU config FULLDEBUG @@ -15,14 +34,6 @@ config HIGHPROFILE help Use a fast secondary clock to produce profiling information. -config BOOTPARAM - bool 'Compiled-in Kernel Boot Parameter' - -config BOOTPARAM_STRING - string 'Kernel Boot Parameter' - default 'console=ttyS0,19200' - depends on BOOTPARAM - config NO_KERNEL_MSG bool "Suppress Kernel BUG Messages" help diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices index 6033f5d4e67e..04a3d9be90e9 100644 --- a/arch/m68k/Kconfig.devices +++ b/arch/m68k/Kconfig.devices @@ -8,8 +8,8 @@ config ARCH_MAY_HAVE_PC_FDC menu "Platform devices" config HEARTBEAT - bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40 - default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300 + bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40 + default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300 help Use the power-on LED on your machine as a load meter. The exact behavior is platform-dependent, but normally the flash frequency is @@ -59,27 +59,6 @@ endmenu menu "Character devices" -config ATARI_MFPSER - tristate "Atari MFP serial support" - depends on ATARI - ---help--- - If you like to use the MFP serial ports ("Modem1", "Serial1") under - Linux, say Y. The driver equally supports all kinds of MFP serial - ports and automatically detects whether Serial1 is available. - - To compile this driver as a module, choose M here. - - Note for Falcon users: You also have an MFP port, it's just not - wired to the outside... But you could use the port under Linux. - -config ATARI_MIDI - tristate "Atari MIDI serial support" - depends on ATARI - help - If you want to use your Atari's MIDI port in Linux, say Y. - - To compile this driver as a module, choose M here. - config ATARI_DSP56K tristate "Atari DSP56k support (EXPERIMENTAL)" depends on ATARI && EXPERIMENTAL @@ -99,15 +78,6 @@ config AMIGA_BUILTIN_SERIAL To compile this driver as a module, choose M here. -config MULTIFACE_III_TTY - tristate "Multiface Card III serial support" - depends on AMIGA - help - If you want to use a Multiface III card's serial port in Linux, - answer Y. - - To compile this driver as a module, choose M here. - config HPDCA tristate "HP DCA serial support" depends on DIO && SERIAL_8250 @@ -122,13 +92,9 @@ config HPAPCI If you want to use the internal "APCI" serial ports on an HP400 machine, say Y here. -config DN_SERIAL - bool "Support for DN serial port (dummy)" - depends on APOLLO - config SERIAL_CONSOLE bool "Support for serial port console" - depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || MULTIFACE_III_TTY=y || SERIAL=y || SERIAL167 || DN_SERIAL) + depends on AMIGA_BUILTIN_SERIAL=y ---help--- If you say Y here, it will be possible to use a serial port as the system console (the system console is the device which receives all @@ -140,10 +106,10 @@ config SERIAL_CONSOLE (/dev/tty0) will still be used as the system console by default, but you can alter that using a kernel command line option such as "console=ttyS1". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) + your boot loader about how to pass options to the kernel at boot + time.) - If you don't have a VGA card installed and you say Y here, the + If you don't have a graphical console and you say Y here, the kernel will automatically use the first serial line, /dev/ttyS0, as system console. diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine index ef4a26aff780..7cdf6b010381 100644 --- a/arch/m68k/Kconfig.machine +++ b/arch/m68k/Kconfig.machine @@ -1,5 +1,7 @@ comment "Machine Types" +if M68KCLASSIC + config AMIGA bool "Amiga support" depends on MMU @@ -130,6 +132,8 @@ config SUN3 If you don't want to compile a kernel exclusively for a Sun 3, say N. +endif # M68KCLASSIC + config PILOT bool diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index 6d196dadfdbc..8048e1b7e552 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -82,8 +82,6 @@ __ALIGN_STR "\n\t" extern void atari_microwire_cmd(int cmd); -extern int atari_SCC_reset_done; - static unsigned int atari_irq_startup(struct irq_data *data) { unsigned int irq = data->irq; diff --git a/arch/m68k/atari/debug.c b/arch/m68k/atari/debug.c index 5a484247e493..a547ba9683d1 100644 --- a/arch/m68k/atari/debug.c +++ b/arch/m68k/atari/debug.c @@ -202,7 +202,6 @@ static void __init atari_init_mfp_port(int cflag) static void __init atari_init_scc_port(int cflag) { - extern int atari_SCC_reset_done; static int clksrc_table[9] = /* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */ { 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 }; diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index dbb49fc6463b..e93fdae10b23 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -255,7 +255,6 @@ CONFIG_HID=m CONFIG_HIDRAW=y # CONFIG_USB_SUPPORT is not set CONFIG_AMIGA_BUILTIN_SERIAL=y -CONFIG_MULTIFACE_III_TTY=m CONFIG_SERIAL_CONSOLE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 562b221f6951..66b26c1e848c 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -223,8 +223,6 @@ CONFIG_LOGO=y CONFIG_HID=m CONFIG_HIDRAW=y # CONFIG_USB_SUPPORT is not set -CONFIG_DN_SERIAL=y -CONFIG_SERIAL_CONSOLE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 82978df637fa..151332515980 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -235,10 +235,7 @@ CONFIG_DMASOUND_ATARI=m CONFIG_HID=m CONFIG_HIDRAW=y # CONFIG_USB_SUPPORT is not set -CONFIG_ATARI_MFPSER=y -CONFIG_ATARI_MIDI=y CONFIG_ATARI_DSP56K=m -CONFIG_SERIAL_CONSOLE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index ad9e85760e34..55d394edf633 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -318,13 +318,8 @@ CONFIG_DMASOUND_Q40=m CONFIG_HID=m CONFIG_HIDRAW=y # CONFIG_USB_SUPPORT is not set -CONFIG_ATARI_MFPSER=y -CONFIG_ATARI_MIDI=y CONFIG_ATARI_DSP56K=m CONFIG_AMIGA_BUILTIN_SERIAL=y -CONFIG_MULTIFACE_III_TTY=m -CONFIG_SERIAL167=y -CONFIG_DN_SERIAL=y CONFIG_SERIAL_CONSOLE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index c45aaf3b816f..cdb70d66e535 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -218,8 +218,6 @@ CONFIG_GEN_RTC_X=y CONFIG_HID=m CONFIG_HIDRAW=y # CONFIG_USB_SUPPORT is not set -CONFIG_SERIAL167=y -CONFIG_SERIAL_CONSOLE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set diff --git a/arch/m68k/emu/nfeth.c b/arch/m68k/emu/nfeth.c index c5748bb4ea71..a985a7e87d45 100644 --- a/arch/m68k/emu/nfeth.c +++ b/arch/m68k/emu/nfeth.c @@ -39,7 +39,7 @@ enum { #define MAX_UNIT 8 /* These identify the driver base version and may not be removed. */ -static const char version[] __devinitdata = +static const char version[] __devinitconst = KERN_INFO KBUILD_MODNAME ".c:v" DRV_VERSION " " DRV_RELDATE " S.Opichal, M.Jurik, P.Stehlik\n" KERN_INFO " http://aranym.org/\n"; diff --git a/arch/m68k/hp300/config.c b/arch/m68k/hp300/config.c index 1c05a6260546..bf16af1edacf 100644 --- a/arch/m68k/hp300/config.c +++ b/arch/m68k/hp300/config.c @@ -24,7 +24,8 @@ unsigned long hp300_model; unsigned long hp300_uart_scode = -1; -unsigned char ledstate; +unsigned char hp300_ledstate; +EXPORT_SYMBOL(hp300_ledstate); static char s_hp330[] __initdata = "330"; static char s_hp340[] __initdata = "340"; diff --git a/arch/m68k/include/asm/anchor.h b/arch/m68k/include/asm/anchor.h deleted file mode 100644 index 871c0d5cfc3d..000000000000 --- a/arch/m68k/include/asm/anchor.h +++ /dev/null @@ -1,112 +0,0 @@ -/****************************************************************************/ - -/* - * anchor.h -- Anchor CO-MEM Lite PCI host bridge part. - * - * (C) Copyright 2000, Moreton Bay (www.moreton.com.au) - */ - -/****************************************************************************/ -#ifndef anchor_h -#define anchor_h -/****************************************************************************/ - -/* - * Define basic addressing info. - */ -#if defined(CONFIG_M5407C3) -#define COMEM_BASE 0xFFFF0000 /* Base of CO-MEM address space */ -#define COMEM_IRQ 25 /* IRQ of anchor part */ -#else -#define COMEM_BASE 0x80000000 /* Base of CO-MEM address space */ -#define COMEM_IRQ 25 /* IRQ of anchor part */ -#endif - -/****************************************************************************/ - -/* - * 4-byte registers of CO-MEM, so adjust register addresses for - * easy access. Handy macro for word access too. - */ -#define LREG(a) ((a) >> 2) -#define WREG(a) ((a) >> 1) - - -/* - * Define base addresses within CO-MEM Lite register address space. - */ -#define COMEM_I2O 0x0000 /* I2O registers */ -#define COMEM_OPREGS 0x0400 /* Operation registers */ -#define COMEM_PCIBUS 0x2000 /* Direct access to PCI bus */ -#define COMEM_SHMEM 0x4000 /* Shared memory region */ - -#define COMEM_SHMEMSIZE 0x4000 /* Size of shared memory */ - - -/* - * Define CO-MEM Registers. - */ -#define COMEM_I2OHISR 0x0030 /* I2O host interrupt status */ -#define COMEM_I2OHIMR 0x0034 /* I2O host interrupt mask */ -#define COMEM_I2OLISR 0x0038 /* I2O local interrupt status */ -#define COMEM_I2OLIMR 0x003c /* I2O local interrupt mask */ -#define COMEM_IBFPFIFO 0x0040 /* I2O inbound free/post FIFO */ -#define COMEM_OBPFFIFO 0x0044 /* I2O outbound post/free FIFO */ -#define COMEM_IBPFFIFO 0x0048 /* I2O inbound post/free FIFO */ -#define COMEM_OBFPFIFO 0x004c /* I2O outbound free/post FIFO */ - -#define COMEM_DAHBASE 0x0460 /* Direct access base address */ - -#define COMEM_NVCMD 0x04a0 /* I2C serial command */ -#define COMEM_NVREAD 0x04a4 /* I2C serial read */ -#define COMEM_NVSTAT 0x04a8 /* I2C status */ - -#define COMEM_DMALBASE 0x04b0 /* DMA local base address */ -#define COMEM_DMAHBASE 0x04b4 /* DMA host base address */ -#define COMEM_DMASIZE 0x04b8 /* DMA size */ -#define COMEM_DMACTL 0x04bc /* DMA control */ - -#define COMEM_HCTL 0x04e0 /* Host control */ -#define COMEM_HINT 0x04e4 /* Host interrupt control/status */ -#define COMEM_HLDATA 0x04e8 /* Host to local data mailbox */ -#define COMEM_LINT 0x04f4 /* Local interrupt contole status */ -#define COMEM_LHDATA 0x04f8 /* Local to host data mailbox */ - -#define COMEM_LBUSCFG 0x04fc /* Local bus configuration */ - - -/* - * Commands and flags for use with Direct Access Register. - */ -#define COMEM_DA_IACK 0x00000000 /* Interrupt acknowledge (read) */ -#define COMEM_DA_SPCL 0x00000010 /* Special cycle (write) */ -#define COMEM_DA_MEMRD 0x00000004 /* Memory read cycle */ -#define COMEM_DA_MEMWR 0x00000004 /* Memory write cycle */ -#define COMEM_DA_IORD 0x00000002 /* I/O read cycle */ -#define COMEM_DA_IOWR 0x00000002 /* I/O write cycle */ -#define COMEM_DA_CFGRD 0x00000006 /* Configuration read cycle */ -#define COMEM_DA_CFGWR 0x00000006 /* Configuration write cycle */ - -#define COMEM_DA_ADDR(a) ((a) & 0xffffe000) - -#define COMEM_DA_OFFSET(a) ((a) & 0x00001fff) - - -/* - * The PCI bus will be limited in what slots will actually be used. - * Define valid device numbers for different boards. - */ -#if defined(CONFIG_M5407C3) -#define COMEM_MINDEV 14 /* Minimum valid DEVICE */ -#define COMEM_MAXDEV 14 /* Maximum valid DEVICE */ -#define COMEM_BRIDGEDEV 15 /* Slot bridge is in */ -#else -#define COMEM_MINDEV 0 /* Minimum valid DEVICE */ -#define COMEM_MAXDEV 3 /* Maximum valid DEVICE */ -#endif - -#define COMEM_MAXPCI (COMEM_MAXDEV+1) /* Maximum PCI devices */ - - -/****************************************************************************/ -#endif /* anchor_h */ diff --git a/arch/m68k/include/asm/atarihw.h b/arch/m68k/include/asm/atarihw.h index 0392b28656ab..c0cb36350775 100644 --- a/arch/m68k/include/asm/atarihw.h +++ b/arch/m68k/include/asm/atarihw.h @@ -30,6 +30,8 @@ extern u_long atari_switches; extern int atari_rtc_year_offset; extern int atari_dont_touch_floppy_select; +extern int atari_SCC_reset_done; + /* convenience macros for testing machine type */ #define MACH_IS_ST ((atari_mch_cookie >> 16) == ATARI_MCH_ST) #define MACH_IS_STE ((atari_mch_cookie >> 16) == ATARI_MCH_STE && \ diff --git a/arch/m68k/include/asm/atomic.h b/arch/m68k/include/asm/atomic.h index 65c6be6c8180..4eba796c00d4 100644 --- a/arch/m68k/include/asm/atomic.h +++ b/arch/m68k/include/asm/atomic.h @@ -55,6 +55,16 @@ static inline int atomic_dec_and_test(atomic_t *v) return c != 0; } +static inline int atomic_dec_and_test_lt(atomic_t *v) +{ + char c; + __asm__ __volatile__( + "subql #1,%1; slt %0" + : "=d" (c), "=m" (*v) + : "m" (*v)); + return c != 0; +} + static inline int atomic_inc_and_test(atomic_t *v) { char c; diff --git a/arch/m68k/include/asm/blinken.h b/arch/m68k/include/asm/blinken.h index 1a749cf7b06d..0626582a7db4 100644 --- a/arch/m68k/include/asm/blinken.h +++ b/arch/m68k/include/asm/blinken.h @@ -17,15 +17,15 @@ #define HP300_LEDS 0xf001ffff -extern unsigned char ledstate; +extern unsigned char hp300_ledstate; static __inline__ void blinken_leds(int on, int off) { if (MACH_IS_HP300) { - ledstate |= on; - ledstate &= ~off; - out_8(HP300_LEDS, ~ledstate); + hp300_ledstate |= on; + hp300_ledstate &= ~off; + out_8(HP300_LEDS, ~hp300_ledstate); } } diff --git a/arch/m68k/include/asm/cacheflush_mm.h b/arch/m68k/include/asm/cacheflush_mm.h index 73de7c89d8e0..8104bd874649 100644 --- a/arch/m68k/include/asm/cacheflush_mm.h +++ b/arch/m68k/include/asm/cacheflush_mm.h @@ -2,23 +2,89 @@ #define _M68K_CACHEFLUSH_H #include <linux/mm.h> +#ifdef CONFIG_COLDFIRE +#include <asm/mcfsim.h> +#endif /* cache code */ #define FLUSH_I_AND_D (0x00000808) #define FLUSH_I (0x00000008) +#ifndef ICACHE_MAX_ADDR +#define ICACHE_MAX_ADDR 0 +#define ICACHE_SET_MASK 0 +#define DCACHE_MAX_ADDR 0 +#define DCACHE_SETMASK 0 +#endif + +static inline void flush_cf_icache(unsigned long start, unsigned long end) +{ + unsigned long set; + + for (set = start; set <= end; set += (0x10 - 3)) { + __asm__ __volatile__ ( + "cpushl %%ic,(%0)\n\t" + "addq%.l #1,%0\n\t" + "cpushl %%ic,(%0)\n\t" + "addq%.l #1,%0\n\t" + "cpushl %%ic,(%0)\n\t" + "addq%.l #1,%0\n\t" + "cpushl %%ic,(%0)" + : "=a" (set) + : "a" (set)); + } +} + +static inline void flush_cf_dcache(unsigned long start, unsigned long end) +{ + unsigned long set; + + for (set = start; set <= end; set += (0x10 - 3)) { + __asm__ __volatile__ ( + "cpushl %%dc,(%0)\n\t" + "addq%.l #1,%0\n\t" + "cpushl %%dc,(%0)\n\t" + "addq%.l #1,%0\n\t" + "cpushl %%dc,(%0)\n\t" + "addq%.l #1,%0\n\t" + "cpushl %%dc,(%0)" + : "=a" (set) + : "a" (set)); + } +} + +static inline void flush_cf_bcache(unsigned long start, unsigned long end) +{ + unsigned long set; + + for (set = start; set <= end; set += (0x10 - 3)) { + __asm__ __volatile__ ( + "cpushl %%bc,(%0)\n\t" + "addq%.l #1,%0\n\t" + "cpushl %%bc,(%0)\n\t" + "addq%.l #1,%0\n\t" + "cpushl %%bc,(%0)\n\t" + "addq%.l #1,%0\n\t" + "cpushl %%bc,(%0)" + : "=a" (set) + : "a" (set)); + } +} + /* * Cache handling functions */ static inline void flush_icache(void) { - if (CPU_IS_040_OR_060) + if (CPU_IS_COLDFIRE) { + flush_cf_icache(0, ICACHE_MAX_ADDR); + } else if (CPU_IS_040_OR_060) { asm volatile ( "nop\n" " .chip 68040\n" " cpusha %bc\n" " .chip 68k"); - else { + } else { unsigned long tmp; asm volatile ( "movec %%cacr,%0\n" " or.w %1,%0\n" @@ -51,12 +117,14 @@ extern void cache_push_v(unsigned long vaddr, int len); process changes. */ #define __flush_cache_all() \ ({ \ - if (CPU_IS_040_OR_060) \ + if (CPU_IS_COLDFIRE) { \ + flush_cf_dcache(0, DCACHE_MAX_ADDR); \ + } else if (CPU_IS_040_OR_060) { \ __asm__ __volatile__("nop\n\t" \ ".chip 68040\n\t" \ "cpusha %dc\n\t" \ ".chip 68k"); \ - else { \ + } else { \ unsigned long _tmp; \ __asm__ __volatile__("movec %%cacr,%0\n\t" \ "orw %1,%0\n\t" \ @@ -112,7 +180,17 @@ static inline void flush_cache_page(struct vm_area_struct *vma, unsigned long vm /* RZ: use cpush %bc instead of cpush %dc, cinv %ic */ static inline void __flush_page_to_ram(void *vaddr) { - if (CPU_IS_040_OR_060) { + if (CPU_IS_COLDFIRE) { + unsigned long addr, start, end; + addr = ((unsigned long) vaddr) & ~(PAGE_SIZE - 1); + start = addr & ICACHE_SET_MASK; + end = (addr + PAGE_SIZE - 1) & ICACHE_SET_MASK; + if (start > end) { + flush_cf_bcache(0, end); + end = ICACHE_MAX_ADDR; + } + flush_cf_bcache(start, end); + } else if (CPU_IS_040_OR_060) { __asm__ __volatile__("nop\n\t" ".chip 68040\n\t" "cpushp %%bc,(%0)\n\t" diff --git a/arch/m68k/include/asm/checksum.h b/arch/m68k/include/asm/checksum.h index ec514485c8b6..2f88d867c711 100644 --- a/arch/m68k/include/asm/checksum.h +++ b/arch/m68k/include/asm/checksum.h @@ -3,6 +3,10 @@ #include <linux/in6.h> +#ifdef CONFIG_GENERIC_CSUM +#include <asm-generic/checksum.h> +#else + /* * computes the checksum of a memory block at buff, length len, * and adds in "sum" (32-bit) @@ -34,30 +38,6 @@ extern __wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum); - -#ifdef CONFIG_COLDFIRE - -/* - * The ColdFire cores don't support all the 68k instructions used - * in the optimized checksum code below. So it reverts back to using - * more standard C coded checksums. The fast checksum code is - * significantly larger than the optimized version, so it is not - * inlined here. - */ -__sum16 ip_fast_csum(const void *iph, unsigned int ihl); - -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int tmp = (__force u32)sum; - - tmp = (tmp & 0xffff) + (tmp >> 16); - tmp = (tmp & 0xffff) + (tmp >> 16); - - return (__force __sum16)~tmp; -} - -#else - /* * This is a version of ip_fast_csum() optimized for IP headers, * which always checksum on 4 octet boundaries. @@ -97,8 +77,6 @@ static inline __sum16 csum_fold(__wsum sum) return (__force __sum16)~sum; } -#endif /* CONFIG_COLDFIRE */ - static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, unsigned short proto, __wsum sum) @@ -167,4 +145,5 @@ csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, return csum_fold(sum); } +#endif /* CONFIG_GENERIC_CSUM */ #endif /* _M68K_CHECKSUM_H */ diff --git a/arch/m68k/include/asm/div64.h b/arch/m68k/include/asm/div64.h index edb66148a71d..444ea8a09e9f 100644 --- a/arch/m68k/include/asm/div64.h +++ b/arch/m68k/include/asm/div64.h @@ -1,7 +1,9 @@ #ifndef _M68K_DIV64_H #define _M68K_DIV64_H -#ifdef CONFIG_MMU +#ifdef CONFIG_CPU_HAS_NO_MULDIV64 +#include <asm-generic/div64.h> +#else #include <linux/types.h> @@ -27,8 +29,6 @@ __rem; \ }) -#else -#include <asm-generic/div64.h> -#endif /* CONFIG_MMU */ +#endif /* CONFIG_CPU_HAS_NO_MULDIV64 */ #endif /* _M68K_DIV64_H */ diff --git a/arch/m68k/include/asm/elf.h b/arch/m68k/include/asm/elf.h index 01c193d91412..e9b7cda59744 100644 --- a/arch/m68k/include/asm/elf.h +++ b/arch/m68k/include/asm/elf.h @@ -59,10 +59,10 @@ typedef struct user_m68kfp_struct elf_fpregset_t; is actually used on ASV. */ #define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0 -#ifndef CONFIG_SUN3 -#define ELF_EXEC_PAGESIZE 4096 -#else +#if defined(CONFIG_SUN3) || defined(CONFIG_COLDFIRE) #define ELF_EXEC_PAGESIZE 8192 +#else +#define ELF_EXEC_PAGESIZE 4096 #endif /* This is the location that an ET_DYN program is loaded if exec'ed. Typical diff --git a/arch/m68k/include/asm/entry.h b/arch/m68k/include/asm/entry.h index c3c5a8643e15..622138dc7288 100644 --- a/arch/m68k/include/asm/entry.h +++ b/arch/m68k/include/asm/entry.h @@ -222,16 +222,24 @@ * Non-MMU systems do not reserve %a2 in this way, and this definition is * not used for them. */ +#ifdef CONFIG_MMU + #define curptr a2 #define GET_CURRENT(tmp) get_current tmp .macro get_current reg=%d0 movel %sp,\reg - andw #-THREAD_SIZE,\reg + andl #-THREAD_SIZE,\reg movel \reg,%curptr movel %curptr@,%curptr .endm +#else + +#define GET_CURRENT(tmp) + +#endif /* CONFIG_MMU */ + #else /* C source */ #define STR(X) STR1(X) diff --git a/arch/m68k/include/asm/fpu.h b/arch/m68k/include/asm/fpu.h index ffb6b8cfc6d5..526db9da9e43 100644 --- a/arch/m68k/include/asm/fpu.h +++ b/arch/m68k/include/asm/fpu.h @@ -12,6 +12,8 @@ #define FPSTATESIZE (96) #elif defined(CONFIG_M68KFPU_EMU) #define FPSTATESIZE (28) +#elif defined(CONFIG_COLDFIRE) && defined(CONFIG_MMU) +#define FPSTATESIZE (16) #elif defined(CONFIG_M68060) #define FPSTATESIZE (12) #else diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h index b2046839f4b2..00d0071de4c3 100644 --- a/arch/m68k/include/asm/gpio.h +++ b/arch/m68k/include/asm/gpio.h @@ -225,7 +225,8 @@ static inline void gpio_set_value(unsigned gpio, int value) static inline int gpio_to_irq(unsigned gpio) { - return (gpio < MCFGPIO_IRQ_MAX) ? gpio + MCFGPIO_IRQ_VECBASE : -EINVAL; + return (gpio < MCFGPIO_IRQ_MAX) ? gpio + MCFGPIO_IRQ_VECBASE + : __gpio_to_irq(gpio); } static inline int irq_to_gpio(unsigned irq) diff --git a/arch/m68k/include/asm/ipcbuf.h b/arch/m68k/include/asm/ipcbuf.h index a623ea3f0955..84c7e51cb6d0 100644 --- a/arch/m68k/include/asm/ipcbuf.h +++ b/arch/m68k/include/asm/ipcbuf.h @@ -1,29 +1 @@ -#ifndef __m68k_IPCBUF_H__ -#define __m68k_IPCBUF_H__ - -/* - * The user_ipc_perm structure for m68k architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __m68k_IPCBUF_H__ */ +#include <asm-generic/ipcbuf.h> diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 6198df5ff245..0e89fa05de0e 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -25,7 +25,8 @@ #define NR_IRQS 0 #endif -#ifdef CONFIG_MMU +#if defined(CONFIG_M68020) || defined(CONFIG_M68030) || \ + defined(CONFIG_M68040) || defined(CONFIG_M68060) /* * Interrupt source definitions @@ -80,7 +81,7 @@ extern unsigned int irq_canonicalize(unsigned int irq); #else #define irq_canonicalize(irq) (irq) -#endif /* CONFIG_MMU */ +#endif /* !(CONFIG_M68020 || CONFIG_M68030 || CONFIG_M68040 || CONFIG_M68060) */ asmlinkage void do_IRQ(int irq, struct pt_regs *regs); extern atomic_t irq_err_count; diff --git a/arch/m68k/include/asm/m54xxacr.h b/arch/m68k/include/asm/m54xxacr.h index 16a1835f9b2a..47906aafbf67 100644 --- a/arch/m68k/include/asm/m54xxacr.h +++ b/arch/m68k/include/asm/m54xxacr.h @@ -39,8 +39,12 @@ #define ACR_CM_OFF_PRE 0x00000040 /* No cache, precise */ #define ACR_CM_OFF_IMP 0x00000060 /* No cache, imprecise */ #define ACR_CM 0x00000060 /* Cache mode mask */ +#define ACR_SP 0x00000008 /* Supervisor protect */ #define ACR_WPROTECT 0x00000004 /* Write protect */ +#define ACR_BA(x) ((x) & 0xff000000) +#define ACR_ADMSK(x) ((((x) - 1) & 0xff000000) >> 8) + #if defined(CONFIG_M5407) #define ICACHE_SIZE 0x4000 /* instruction - 16k */ @@ -56,6 +60,11 @@ #define CACHE_LINE_SIZE 0x0010 /* 16 bytes */ #define CACHE_WAYS 4 /* 4 ways */ +#define ICACHE_SET_MASK ((ICACHE_SIZE / 64 - 1) << CACHE_WAYS) +#define DCACHE_SET_MASK ((DCACHE_SIZE / 64 - 1) << CACHE_WAYS) +#define ICACHE_MAX_ADDR ICACHE_SET_MASK +#define DCACHE_MAX_ADDR DCACHE_SET_MASK + /* * Version 4 cores have a true harvard style separate instruction * and data cache. Enable data and instruction caches, also enable write @@ -73,6 +82,27 @@ #else #define CACHE_MODE (CACR_DEC+CACR_DESB+CACR_DDCM_P+CACR_BEC+CACR_IEC+CACR_EUSP) #endif +#define CACHE_INIT (CACR_DCINVA+CACR_BCINVA+CACR_ICINVA) + +#if defined(CONFIG_MMU) +/* + * If running with the MMU enabled then we need to map the internal + * register region as non-cacheable. And then we map all our RAM as + * cacheable and supervisor access only. + */ +#define ACR0_MODE (ACR_BA(CONFIG_MBAR)+ACR_ADMSK(0x1000000)+ \ + ACR_ENABLE+ACR_SUPER+ACR_CM_OFF_PRE+ACR_SP) +#define ACR1_MODE (ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \ + ACR_ENABLE+ACR_SUPER+ACR_SP) +#define ACR2_MODE 0 +#define ACR3_MODE (ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \ + ACR_ENABLE+ACR_SUPER+ACR_SP) + +#else + +/* + * For the non-MMU enabled case we map all of RAM as cacheable. + */ #if defined(CONFIG_CACHE_COPYBACK) #define DATA_CACHE_MODE (ACR_ENABLE+ACR_ANY+ACR_CM_CP) #else @@ -80,7 +110,6 @@ #endif #define INSN_CACHE_MODE (ACR_ENABLE+ACR_ANY) -#define CACHE_INIT (CACR_DCINVA+CACR_BCINVA+CACR_ICINVA) #define CACHE_INVALIDATE (CACHE_MODE+CACR_DCINVA+CACR_BCINVA+CACR_ICINVA) #define CACHE_INVALIDATEI (CACHE_MODE+CACR_BCINVA+CACR_ICINVA) #define CACHE_INVALIDATED (CACHE_MODE+CACR_DCINVA) @@ -94,4 +123,5 @@ #define CACHE_PUSH #endif +#endif /* CONFIG_MMU */ #endif /* m54xxacr_h */ diff --git a/arch/m68k/include/asm/mac_baboon.h b/arch/m68k/include/asm/mac_baboon.h index c2a042b8c349..a2d32f6589f9 100644 --- a/arch/m68k/include/asm/mac_baboon.h +++ b/arch/m68k/include/asm/mac_baboon.h @@ -29,4 +29,10 @@ struct baboon { */ }; +extern int baboon_present; + +extern void baboon_register_interrupts(void); +extern void baboon_irq_enable(int); +extern void baboon_irq_disable(int); + #endif /* __ASSEMBLY **/ diff --git a/arch/m68k/include/asm/mac_iop.h b/arch/m68k/include/asm/mac_iop.h index a2c7e6fcca38..fde874a01e20 100644 --- a/arch/m68k/include/asm/mac_iop.h +++ b/arch/m68k/include/asm/mac_iop.h @@ -159,4 +159,6 @@ extern void iop_upload_code(uint, __u8 *, uint, __u16); extern void iop_download_code(uint, __u8 *, uint, __u16); extern __u8 *iop_compare_code(uint, __u8 *, uint, __u16); +extern void iop_register_interrupts(void); + #endif /* __ASSEMBLY__ */ diff --git a/arch/m68k/include/asm/mac_oss.h b/arch/m68k/include/asm/mac_oss.h index 3cf2b6ed685a..425fbff4f4d8 100644 --- a/arch/m68k/include/asm/mac_oss.h +++ b/arch/m68k/include/asm/mac_oss.h @@ -58,25 +58,6 @@ #define OSS_POWEROFF 0x80 -/* - * OSS Interrupt levels for various sub-systems - * - * This mapping is laid out with two things in mind: first, we try to keep - * things on their own levels to avoid having to do double-dispatches. Second, - * the levels match as closely as possible the alternate IRQ mapping mode (aka - * "A/UX mode") available on some VIA machines. - */ - -#define OSS_IRQLEV_DISABLED 0 -#define OSS_IRQLEV_IOPISM 1 /* ADB? */ -#define OSS_IRQLEV_SCSI IRQ_AUTO_2 -#define OSS_IRQLEV_NUBUS IRQ_AUTO_3 /* keep this on its own level */ -#define OSS_IRQLEV_IOPSCC IRQ_AUTO_4 /* matches VIA alternate mapping */ -#define OSS_IRQLEV_SOUND IRQ_AUTO_5 /* matches VIA alternate mapping */ -#define OSS_IRQLEV_60HZ 6 /* matches VIA alternate mapping */ -#define OSS_IRQLEV_VIA1 IRQ_AUTO_6 /* matches VIA alternate mapping */ -#define OSS_IRQLEV_PARITY 7 /* matches VIA alternate mapping */ - #ifndef __ASSEMBLY__ struct mac_oss { @@ -91,4 +72,8 @@ struct mac_oss { extern volatile struct mac_oss *oss; extern int oss_present; +extern void oss_register_interrupts(void); +extern void oss_irq_enable(int); +extern void oss_irq_disable(int); + #endif /* __ASSEMBLY__ */ diff --git a/arch/m68k/include/asm/mac_psc.h b/arch/m68k/include/asm/mac_psc.h index 7808bb0b2323..e5c0d71d1543 100644 --- a/arch/m68k/include/asm/mac_psc.h +++ b/arch/m68k/include/asm/mac_psc.h @@ -211,6 +211,10 @@ extern volatile __u8 *psc; extern int psc_present; +extern void psc_register_interrupts(void); +extern void psc_irq_enable(int); +extern void psc_irq_disable(int); + /* * Access functions */ diff --git a/arch/m68k/include/asm/mac_via.h b/arch/m68k/include/asm/mac_via.h index a59665e1d41b..aeeedf8b2d25 100644 --- a/arch/m68k/include/asm/mac_via.h +++ b/arch/m68k/include/asm/mac_via.h @@ -254,6 +254,15 @@ extern volatile __u8 *via1,*via2; extern int rbv_present,via_alt_mapping; +extern void via_register_interrupts(void); +extern void via_irq_enable(int); +extern void via_irq_disable(int); +extern void via_nubus_irq_startup(int irq); +extern void via_nubus_irq_shutdown(int irq); +extern void via1_irq(unsigned int irq, struct irq_desc *desc); +extern void via1_set_head(int); +extern int via2_scsi_drq_pending(void); + static inline int rbv_set_video_bpp(int bpp) { char val = (bpp==1)?0:(bpp==2)?1:(bpp==4)?2:(bpp==8)?3:-1; diff --git a/arch/m68k/include/asm/macintosh.h b/arch/m68k/include/asm/macintosh.h index 12ebe43b008b..682a1a2ff55f 100644 --- a/arch/m68k/include/asm/macintosh.h +++ b/arch/m68k/include/asm/macintosh.h @@ -11,17 +11,11 @@ extern void mac_reset(void); extern void mac_poweroff(void); extern void mac_init_IRQ(void); -extern int mac_irq_pending(unsigned int); + extern void mac_irq_enable(struct irq_data *data); extern void mac_irq_disable(struct irq_data *data); /* - * Floppy driver magic hook - probably shouldn't be here - */ - -extern void via1_set_head(int); - -/* * Macintosh Table */ @@ -48,7 +42,7 @@ struct mac_model #define MAC_ADB_IOP 6 #define MAC_VIA_II 1 -#define MAC_VIA_IIci 2 +#define MAC_VIA_IICI 2 #define MAC_VIA_QUADRA 3 #define MAC_SCSI_NONE 0 diff --git a/arch/m68k/include/asm/macints.h b/arch/m68k/include/asm/macints.h index ebe1b70fe90c..92aa8a4c2d03 100644 --- a/arch/m68k/include/asm/macints.h +++ b/arch/m68k/include/asm/macints.h @@ -104,6 +104,9 @@ #define IRQ_PSC4_3 (35) #define IRQ_MAC_MACE_DMA IRQ_PSC4_3 +/* OSS Level 4 interrupts */ +#define IRQ_MAC_SCC (33) + /* Level 5 (PSC, AV Macs only) interrupts */ #define IRQ_PSC5_0 (40) #define IRQ_PSC5_1 (41) @@ -131,9 +134,6 @@ #define IRQ_BABOON_2 (66) #define IRQ_BABOON_3 (67) -/* On non-PSC machines, the serial ports share an IRQ */ -#define IRQ_MAC_SCC IRQ_AUTO_4 - #define SLOT2IRQ(x) (x + 47) #define IRQ2SLOT(x) (x - 47) diff --git a/arch/m68k/include/asm/mcf_pgalloc.h b/arch/m68k/include/asm/mcf_pgalloc.h new file mode 100644 index 000000000000..313f3dd23cdc --- /dev/null +++ b/arch/m68k/include/asm/mcf_pgalloc.h @@ -0,0 +1,102 @@ +#ifndef M68K_MCF_PGALLOC_H +#define M68K_MCF_PGALLOC_H + +#include <asm/tlb.h> +#include <asm/tlbflush.h> + +extern inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + free_page((unsigned long) pte); +} + +extern const char bad_pmd_string[]; + +extern inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long address) +{ + unsigned long page = __get_free_page(GFP_DMA|__GFP_REPEAT); + + if (!page) + return NULL; + + memset((void *)page, 0, PAGE_SIZE); + return (pte_t *) (page); +} + +extern inline pmd_t *pmd_alloc_kernel(pgd_t *pgd, unsigned long address) +{ + return (pmd_t *) pgd; +} + +#define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); }) +#define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); }) + +#define pte_alloc_one_fast(mm, addr) pte_alloc_one(mm, addr) + +#define pmd_populate(mm, pmd, page) (pmd_val(*pmd) = \ + (unsigned long)(page_address(page))) + +#define pmd_populate_kernel(mm, pmd, pte) (pmd_val(*pmd) = (unsigned long)(pte)) + +#define pmd_pgtable(pmd) pmd_page(pmd) + +static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page, + unsigned long address) +{ + __free_page(page); +} + +#define __pmd_free_tlb(tlb, pmd, address) do { } while (0) + +static inline struct page *pte_alloc_one(struct mm_struct *mm, + unsigned long address) +{ + struct page *page = alloc_pages(GFP_DMA|__GFP_REPEAT, 0); + pte_t *pte; + + if (!page) + return NULL; + + pte = kmap(page); + if (pte) { + clear_page(pte); + __flush_page_to_ram(pte); + flush_tlb_kernel_page(pte); + nocache_page(pte); + } + kunmap(page); + + return page; +} + +extern inline void pte_free(struct mm_struct *mm, struct page *page) +{ + __free_page(page); +} + +/* + * In our implementation, each pgd entry contains 1 pmd that is never allocated + * or freed. pgd_present is always 1, so this should never be called. -NL + */ +#define pmd_free(mm, pmd) BUG() + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + free_page((unsigned long) pgd); +} + +static inline pgd_t *pgd_alloc(struct mm_struct *mm) +{ + pgd_t *new_pgd; + + new_pgd = (pgd_t *)__get_free_page(GFP_DMA | __GFP_NOWARN); + if (!new_pgd) + return NULL; + memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE); + memset(new_pgd, 0, PAGE_OFFSET >> PGDIR_SHIFT); + return new_pgd; +} + +#define pgd_populate(mm, pmd, pte) BUG() + +#endif /* M68K_MCF_PGALLOC_H */ diff --git a/arch/m68k/include/asm/mcf_pgtable.h b/arch/m68k/include/asm/mcf_pgtable.h new file mode 100644 index 000000000000..756bde4fb4f8 --- /dev/null +++ b/arch/m68k/include/asm/mcf_pgtable.h @@ -0,0 +1,425 @@ +#ifndef _MCF_PGTABLE_H +#define _MCF_PGTABLE_H + +#include <asm/mcfmmu.h> +#include <asm/page.h> + +/* + * MMUDR bits, in proper place. We write these directly into the MMUDR + * after masking from the pte. + */ +#define CF_PAGE_LOCKED MMUDR_LK /* 0x00000002 */ +#define CF_PAGE_EXEC MMUDR_X /* 0x00000004 */ +#define CF_PAGE_WRITABLE MMUDR_W /* 0x00000008 */ +#define CF_PAGE_READABLE MMUDR_R /* 0x00000010 */ +#define CF_PAGE_SYSTEM MMUDR_SP /* 0x00000020 */ +#define CF_PAGE_COPYBACK MMUDR_CM_CCB /* 0x00000040 */ +#define CF_PAGE_NOCACHE MMUDR_CM_NCP /* 0x00000080 */ + +#define CF_CACHEMASK (~MMUDR_CM_CCB) +#define CF_PAGE_MMUDR_MASK 0x000000fe + +#define _PAGE_NOCACHE030 CF_PAGE_NOCACHE + +/* + * MMUTR bits, need shifting down. + */ +#define CF_PAGE_MMUTR_MASK 0x00000c00 +#define CF_PAGE_MMUTR_SHIFT 10 + +#define CF_PAGE_VALID (MMUTR_V << CF_PAGE_MMUTR_SHIFT) +#define CF_PAGE_SHARED (MMUTR_SG << CF_PAGE_MMUTR_SHIFT) + +/* + * Fake bits, not implemented in CF, will get masked out before + * hitting hardware. + */ +#define CF_PAGE_DIRTY 0x00000001 +#define CF_PAGE_FILE 0x00000200 +#define CF_PAGE_ACCESSED 0x00001000 + +#define _PAGE_CACHE040 0x020 /* 68040 cache mode, cachable, copyback */ +#define _PAGE_NOCACHE_S 0x040 /* 68040 no-cache mode, serialized */ +#define _PAGE_NOCACHE 0x060 /* 68040 cache mode, non-serialized */ +#define _PAGE_CACHE040W 0x000 /* 68040 cache mode, cachable, write-through */ +#define _DESCTYPE_MASK 0x003 +#define _CACHEMASK040 (~0x060) +#define _PAGE_GLOBAL040 0x400 /* 68040 global bit, used for kva descs */ + +/* + * Externally used page protection values. + */ +#define _PAGE_PRESENT (CF_PAGE_VALID) +#define _PAGE_ACCESSED (CF_PAGE_ACCESSED) +#define _PAGE_DIRTY (CF_PAGE_DIRTY) +#define _PAGE_READWRITE (CF_PAGE_READABLE \ + | CF_PAGE_WRITABLE \ + | CF_PAGE_SYSTEM \ + | CF_PAGE_SHARED) + +/* + * Compound page protection values. + */ +#define PAGE_NONE __pgprot(CF_PAGE_VALID \ + | CF_PAGE_ACCESSED) + +#define PAGE_SHARED __pgprot(CF_PAGE_VALID \ + | CF_PAGE_ACCESSED \ + | CF_PAGE_SHARED) + +#define PAGE_INIT __pgprot(CF_PAGE_VALID \ + | CF_PAGE_READABLE \ + | CF_PAGE_WRITABLE \ + | CF_PAGE_EXEC \ + | CF_PAGE_SYSTEM) + +#define PAGE_KERNEL __pgprot(CF_PAGE_VALID \ + | CF_PAGE_ACCESSED \ + | CF_PAGE_READABLE \ + | CF_PAGE_WRITABLE \ + | CF_PAGE_EXEC \ + | CF_PAGE_SYSTEM) + +#define PAGE_COPY __pgprot(CF_PAGE_VALID \ + | CF_PAGE_ACCESSED \ + | CF_PAGE_READABLE \ + | CF_PAGE_DIRTY) + +/* + * Page protections for initialising protection_map. See mm/mmap.c + * for use. In general, the bit positions are xwr, and P-items are + * private, the S-items are shared. + */ +#define __P000 PAGE_NONE +#define __P001 __pgprot(CF_PAGE_VALID \ + | CF_PAGE_ACCESSED \ + | CF_PAGE_READABLE) +#define __P010 __pgprot(CF_PAGE_VALID \ + | CF_PAGE_ACCESSED \ + | CF_PAGE_WRITABLE) +#define __P011 __pgprot(CF_PAGE_VALID \ + | CF_PAGE_ACCESSED \ + | CF_PAGE_READABLE \ + | CF_PAGE_WRITABLE) +#define __P100 __pgprot(CF_PAGE_VALID \ + | CF_PAGE_ACCESSED \ + | CF_PAGE_EXEC) +#define __P101 __pgprot(CF_PAGE_VALID \ + | CF_PAGE_ACCESSED \ + | CF_PAGE_READABLE \ + | CF_PAGE_EXEC) +#define __P110 __pgprot(CF_PAGE_VALID \ + | CF_PAGE_ACCESSED \ + | CF_PAGE_WRITABLE \ + | CF_PAGE_EXEC) +#define __P111 __pgprot(CF_PAGE_VALID \ + | CF_PAGE_ACCESSED \ + | CF_PAGE_READABLE \ + | CF_PAGE_WRITABLE \ + | CF_PAGE_EXEC) + +#define __S000 PAGE_NONE +#define __S001 __pgprot(CF_PAGE_VALID \ + | CF_PAGE_ACCESSED \ + | CF_PAGE_READABLE) +#define __S010 PAGE_SHARED +#define __S011 __pgprot(CF_PAGE_VALID \ + | CF_PAGE_ACCESSED \ + | CF_PAGE_SHARED \ + | CF_PAGE_READABLE) +#define __S100 __pgprot(CF_PAGE_VALID \ + | CF_PAGE_ACCESSED \ + | CF_PAGE_EXEC) +#define __S101 __pgprot(CF_PAGE_VALID \ + | CF_PAGE_ACCESSED \ + | CF_PAGE_READABLE \ + | CF_PAGE_EXEC) +#define __S110 __pgprot(CF_PAGE_VALID \ + | CF_PAGE_ACCESSED \ + | CF_PAGE_SHARED \ + | CF_PAGE_EXEC) +#define __S111 __pgprot(CF_PAGE_VALID \ + | CF_PAGE_ACCESSED \ + | CF_PAGE_SHARED \ + | CF_PAGE_READABLE \ + | CF_PAGE_EXEC) + +#define PTE_MASK PAGE_MASK +#define CF_PAGE_CHG_MASK (PTE_MASK | CF_PAGE_ACCESSED | CF_PAGE_DIRTY) + +#ifndef __ASSEMBLY__ + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + pte_val(pte) = (pte_val(pte) & CF_PAGE_CHG_MASK) | pgprot_val(newprot); + return pte; +} + +#define pmd_set(pmdp, ptep) do {} while (0) + +static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp) +{ + pgd_val(*pgdp) = virt_to_phys(pmdp); +} + +#define __pte_page(pte) ((unsigned long) (pte_val(pte) & PAGE_MASK)) +#define __pmd_page(pmd) ((unsigned long) (pmd_val(pmd))) + +static inline int pte_none(pte_t pte) +{ + return !pte_val(pte); +} + +static inline int pte_present(pte_t pte) +{ + return pte_val(pte) & CF_PAGE_VALID; +} + +static inline void pte_clear(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) +{ + pte_val(*ptep) = 0; +} + +#define pte_pagenr(pte) ((__pte_page(pte) - PAGE_OFFSET) >> PAGE_SHIFT) +#define pte_page(pte) virt_to_page(__pte_page(pte)) + +static inline int pmd_none2(pmd_t *pmd) { return !pmd_val(*pmd); } +#define pmd_none(pmd) pmd_none2(&(pmd)) +static inline int pmd_bad2(pmd_t *pmd) { return 0; } +#define pmd_bad(pmd) pmd_bad2(&(pmd)) +#define pmd_present(pmd) (!pmd_none2(&(pmd))) +static inline void pmd_clear(pmd_t *pmdp) { pmd_val(*pmdp) = 0; } + +static inline int pgd_none(pgd_t pgd) { return 0; } +static inline int pgd_bad(pgd_t pgd) { return 0; } +static inline int pgd_present(pgd_t pgd) { return 1; } +static inline void pgd_clear(pgd_t *pgdp) {} + +#define pte_ERROR(e) \ + printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \ + __FILE__, __LINE__, pte_val(e)) +#define pmd_ERROR(e) \ + printk(KERN_ERR "%s:%d: bad pmd %08lx.\n", \ + __FILE__, __LINE__, pmd_val(e)) +#define pgd_ERROR(e) \ + printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \ + __FILE__, __LINE__, pgd_val(e)) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not... + * [we have the full set here even if they don't change from m68k] + */ +static inline int pte_read(pte_t pte) +{ + return pte_val(pte) & CF_PAGE_READABLE; +} + +static inline int pte_write(pte_t pte) +{ + return pte_val(pte) & CF_PAGE_WRITABLE; +} + +static inline int pte_exec(pte_t pte) +{ + return pte_val(pte) & CF_PAGE_EXEC; +} + +static inline int pte_dirty(pte_t pte) +{ + return pte_val(pte) & CF_PAGE_DIRTY; +} + +static inline int pte_young(pte_t pte) +{ + return pte_val(pte) & CF_PAGE_ACCESSED; +} + +static inline int pte_file(pte_t pte) +{ + return pte_val(pte) & CF_PAGE_FILE; +} + +static inline int pte_special(pte_t pte) +{ + return 0; +} + +static inline pte_t pte_wrprotect(pte_t pte) +{ + pte_val(pte) &= ~CF_PAGE_WRITABLE; + return pte; +} + +static inline pte_t pte_rdprotect(pte_t pte) +{ + pte_val(pte) &= ~CF_PAGE_READABLE; + return pte; +} + +static inline pte_t pte_exprotect(pte_t pte) +{ + pte_val(pte) &= ~CF_PAGE_EXEC; + return pte; +} + +static inline pte_t pte_mkclean(pte_t pte) +{ + pte_val(pte) &= ~CF_PAGE_DIRTY; + return pte; +} + +static inline pte_t pte_mkold(pte_t pte) +{ + pte_val(pte) &= ~CF_PAGE_ACCESSED; + return pte; +} + +static inline pte_t pte_mkwrite(pte_t pte) +{ + pte_val(pte) |= CF_PAGE_WRITABLE; + return pte; +} + +static inline pte_t pte_mkread(pte_t pte) +{ + pte_val(pte) |= CF_PAGE_READABLE; + return pte; +} + +static inline pte_t pte_mkexec(pte_t pte) +{ + pte_val(pte) |= CF_PAGE_EXEC; + return pte; +} + +static inline pte_t pte_mkdirty(pte_t pte) +{ + pte_val(pte) |= CF_PAGE_DIRTY; + return pte; +} + +static inline pte_t pte_mkyoung(pte_t pte) +{ + pte_val(pte) |= CF_PAGE_ACCESSED; + return pte; +} + +static inline pte_t pte_mknocache(pte_t pte) +{ + pte_val(pte) |= 0x80 | (pte_val(pte) & ~0x40); + return pte; +} + +static inline pte_t pte_mkcache(pte_t pte) +{ + pte_val(pte) &= ~CF_PAGE_NOCACHE; + return pte; +} + +static inline pte_t pte_mkspecial(pte_t pte) +{ + return pte; +} + +#define swapper_pg_dir kernel_pg_dir +extern pgd_t kernel_pg_dir[PTRS_PER_PGD]; + +/* + * Find an entry in a pagetable directory. + */ +#define pgd_index(address) ((address) >> PGDIR_SHIFT) +#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) + +/* + * Find an entry in a kernel pagetable directory. + */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* + * Find an entry in the second-level pagetable. + */ +static inline pmd_t *pmd_offset(pgd_t *pgd, unsigned long address) +{ + return (pmd_t *) pgd; +} + +/* + * Find an entry in the third-level pagetable. + */ +#define __pte_offset(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset_kernel(dir, address) \ + ((pte_t *) __pmd_page(*(dir)) + __pte_offset(address)) + +/* + * Disable caching for page at given kernel virtual address. + */ +static inline void nocache_page(void *vaddr) +{ + pgd_t *dir; + pmd_t *pmdp; + pte_t *ptep; + unsigned long addr = (unsigned long) vaddr; + + dir = pgd_offset_k(addr); + pmdp = pmd_offset(dir, addr); + ptep = pte_offset_kernel(pmdp, addr); + *ptep = pte_mknocache(*ptep); +} + +/* + * Enable caching for page at given kernel virtual address. + */ +static inline void cache_page(void *vaddr) +{ + pgd_t *dir; + pmd_t *pmdp; + pte_t *ptep; + unsigned long addr = (unsigned long) vaddr; + + dir = pgd_offset_k(addr); + pmdp = pmd_offset(dir, addr); + ptep = pte_offset_kernel(pmdp, addr); + *ptep = pte_mkcache(*ptep); +} + +#define PTE_FILE_MAX_BITS 21 +#define PTE_FILE_SHIFT 11 + +static inline unsigned long pte_to_pgoff(pte_t pte) +{ + return pte_val(pte) >> PTE_FILE_SHIFT; +} + +static inline pte_t pgoff_to_pte(unsigned pgoff) +{ + return __pte((pgoff << PTE_FILE_SHIFT) + CF_PAGE_FILE); +} + +/* + * Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e)) + */ +#define __swp_type(x) ((x).val & 0xFF) +#define __swp_offset(x) ((x).val >> PTE_FILE_SHIFT) +#define __swp_entry(typ, off) ((swp_entry_t) { (typ) | \ + (off << PTE_FILE_SHIFT) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) (__pte((x).val)) + +#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)) + +#define pte_offset_map(pmdp, addr) ((pte_t *)__pmd_page(*pmdp) + \ + __pte_offset(addr)) +#define pte_unmap(pte) ((void) 0) +#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) + +#endif /* !__ASSEMBLY__ */ +#endif /* _MCF_PGTABLE_H */ diff --git a/arch/m68k/include/asm/mcfmmu.h b/arch/m68k/include/asm/mcfmmu.h new file mode 100644 index 000000000000..26cc3d5a63f8 --- /dev/null +++ b/arch/m68k/include/asm/mcfmmu.h @@ -0,0 +1,112 @@ +/* + * mcfmmu.h -- definitions for the ColdFire v4e MMU + * + * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef MCFMMU_H +#define MCFMMU_H + +/* + * The MMU support registers are mapped into the address space using + * the processor MMUBASE register. We used a fixed address for mapping, + * there doesn't seem any need to make this configurable yet. + */ +#define MMUBASE 0xfe000000 + +/* + * The support registers of the MMU. Names are the sames as those + * used in the Freescale v4e documentation. + */ +#define MMUCR (MMUBASE + 0x00) /* Control register */ +#define MMUOR (MMUBASE + 0x04) /* Operation register */ +#define MMUSR (MMUBASE + 0x08) /* Status register */ +#define MMUAR (MMUBASE + 0x10) /* TLB Address register */ +#define MMUTR (MMUBASE + 0x14) /* TLB Tag register */ +#define MMUDR (MMUBASE + 0x18) /* TLB Data register */ + +/* + * MMU Control register bit flags + */ +#define MMUCR_EN 0x00000001 /* Virtual mode enable */ +#define MMUCR_ASM 0x00000002 /* Address space mode */ + +/* + * MMU Operation register. + */ +#define MMUOR_UAA 0x00000001 /* Update allocatiom address */ +#define MMUOR_ACC 0x00000002 /* TLB access */ +#define MMUOR_RD 0x00000004 /* TLB access read */ +#define MMUOR_WR 0x00000000 /* TLB access write */ +#define MMUOR_ADR 0x00000008 /* TLB address select */ +#define MMUOR_ITLB 0x00000010 /* ITLB operation */ +#define MMUOR_CAS 0x00000020 /* Clear non-locked ASID TLBs */ +#define MMUOR_CNL 0x00000040 /* Clear non-locked TLBs */ +#define MMUOR_CA 0x00000080 /* Clear all TLBs */ +#define MMUOR_STLB 0x00000100 /* Search TLBs */ +#define MMUOR_AAN 16 /* TLB allocation address */ +#define MMUOR_AAMASK 0xffff0000 /* AA mask */ + +/* + * MMU Status register. + */ +#define MMUSR_HIT 0x00000002 /* Search TLB hit */ +#define MMUSR_WF 0x00000008 /* Write access fault */ +#define MMUSR_RF 0x00000010 /* Read access fault */ +#define MMUSR_SPF 0x00000020 /* Supervisor protect fault */ + +/* + * MMU Read/Write Tag register. + */ +#define MMUTR_V 0x00000001 /* Valid */ +#define MMUTR_SG 0x00000002 /* Shared global */ +#define MMUTR_IDN 2 /* Address Space ID */ +#define MMUTR_IDMASK 0x000003fc /* ASID mask */ +#define MMUTR_VAN 10 /* Virtual Address */ +#define MMUTR_VAMASK 0xfffffc00 /* VA mask */ + +/* + * MMU Read/Write Data register. + */ +#define MMUDR_LK 0x00000002 /* Lock entry */ +#define MMUDR_X 0x00000004 /* Execute access enable */ +#define MMUDR_W 0x00000008 /* Write access enable */ +#define MMUDR_R 0x00000010 /* Read access enable */ +#define MMUDR_SP 0x00000020 /* Supervisor access enable */ +#define MMUDR_CM_CWT 0x00000000 /* Cachable write thru */ +#define MMUDR_CM_CCB 0x00000040 /* Cachable copy back */ +#define MMUDR_CM_NCP 0x00000080 /* Non-cachable precise */ +#define MMUDR_CM_NCI 0x000000c0 /* Non-cachable imprecise */ +#define MMUDR_SZ_1MB 0x00000000 /* 1MB page size */ +#define MMUDR_SZ_4KB 0x00000100 /* 4kB page size */ +#define MMUDR_SZ_8KB 0x00000200 /* 8kB page size */ +#define MMUDR_SZ_1KB 0x00000300 /* 1kB page size */ +#define MMUDR_PAN 10 /* Physical address */ +#define MMUDR_PAMASK 0xfffffc00 /* PA mask */ + +#ifndef __ASSEMBLY__ + +/* + * Simple access functions for the MMU registers. Nothing fancy + * currently required, just simple 32bit access. + */ +static inline u32 mmu_read(u32 a) +{ + return *((volatile u32 *) a); +} + +static inline void mmu_write(u32 a, u32 v) +{ + *((volatile u32 *) a) = v; + __asm__ __volatile__ ("nop"); +} + +int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word); + +#endif + +#endif /* MCFMMU_H */ diff --git a/arch/m68k/include/asm/mmu_context.h b/arch/m68k/include/asm/mmu_context.h index 7d4341e55a99..dc3be991d634 100644 --- a/arch/m68k/include/asm/mmu_context.h +++ b/arch/m68k/include/asm/mmu_context.h @@ -8,7 +8,206 @@ static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) } #ifdef CONFIG_MMU -#ifndef CONFIG_SUN3 + +#if defined(CONFIG_COLDFIRE) + +#include <asm/atomic.h> +#include <asm/bitops.h> +#include <asm/mcfmmu.h> +#include <asm/mmu.h> + +#define NO_CONTEXT 256 +#define LAST_CONTEXT 255 +#define FIRST_CONTEXT 1 + +extern unsigned long context_map[]; +extern mm_context_t next_mmu_context; + +extern atomic_t nr_free_contexts; +extern struct mm_struct *context_mm[LAST_CONTEXT+1]; +extern void steal_context(void); + +static inline void get_mmu_context(struct mm_struct *mm) +{ + mm_context_t ctx; + + if (mm->context != NO_CONTEXT) + return; + while (atomic_dec_and_test_lt(&nr_free_contexts)) { + atomic_inc(&nr_free_contexts); + steal_context(); + } + ctx = next_mmu_context; + while (test_and_set_bit(ctx, context_map)) { + ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx); + if (ctx > LAST_CONTEXT) + ctx = 0; + } + next_mmu_context = (ctx + 1) & LAST_CONTEXT; + mm->context = ctx; + context_mm[ctx] = mm; +} + +/* + * Set up the context for a new address space. + */ +#define init_new_context(tsk, mm) (((mm)->context = NO_CONTEXT), 0) + +/* + * We're finished using the context for an address space. + */ +static inline void destroy_context(struct mm_struct *mm) +{ + if (mm->context != NO_CONTEXT) { + clear_bit(mm->context, context_map); + mm->context = NO_CONTEXT; + atomic_inc(&nr_free_contexts); + } +} + +static inline void set_context(mm_context_t context, pgd_t *pgd) +{ + __asm__ __volatile__ ("movec %0,%%asid" : : "d" (context)); +} + +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + get_mmu_context(tsk->mm); + set_context(tsk->mm->context, next->pgd); +} + +/* + * After we have set current->mm to a new value, this activates + * the context for the new mm so we see the new mappings. + */ +static inline void activate_mm(struct mm_struct *active_mm, + struct mm_struct *mm) +{ + get_mmu_context(mm); + set_context(mm->context, mm->pgd); +} + +#define deactivate_mm(tsk, mm) do { } while (0) + +extern void mmu_context_init(void); +#define prepare_arch_switch(next) load_ksp_mmu(next) + +static inline void load_ksp_mmu(struct task_struct *task) +{ + unsigned long flags; + struct mm_struct *mm; + int asid; + pgd_t *pgd; + pmd_t *pmd; + pte_t *pte; + unsigned long mmuar; + + local_irq_save(flags); + mmuar = task->thread.ksp; + + /* Search for a valid TLB entry, if one is found, don't remap */ + mmu_write(MMUAR, mmuar); + mmu_write(MMUOR, MMUOR_STLB | MMUOR_ADR); + if (mmu_read(MMUSR) & MMUSR_HIT) + goto end; + + if (mmuar >= PAGE_OFFSET) { + mm = &init_mm; + } else { + pr_info("load_ksp_mmu: non-kernel mm found: 0x%p\n", task->mm); + mm = task->mm; + } + + if (!mm) + goto bug; + + pgd = pgd_offset(mm, mmuar); + if (pgd_none(*pgd)) + goto bug; + + pmd = pmd_offset(pgd, mmuar); + if (pmd_none(*pmd)) + goto bug; + + pte = (mmuar >= PAGE_OFFSET) ? pte_offset_kernel(pmd, mmuar) + : pte_offset_map(pmd, mmuar); + if (pte_none(*pte) || !pte_present(*pte)) + goto bug; + + set_pte(pte, pte_mkyoung(*pte)); + asid = mm->context & 0xff; + if (!pte_dirty(*pte) && mmuar <= PAGE_OFFSET) + set_pte(pte, pte_wrprotect(*pte)); + + mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) | + (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK) + >> CF_PAGE_MMUTR_SHIFT) | MMUTR_V); + + mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) | + ((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X); + + mmu_write(MMUOR, MMUOR_ACC | MMUOR_UAA); + + goto end; + +bug: + pr_info("ksp load failed: mm=0x%p ksp=0x08%lx\n", mm, mmuar); +end: + local_irq_restore(flags); +} + +#elif defined(CONFIG_SUN3) +#include <asm/sun3mmu.h> +#include <linux/sched.h> + +extern unsigned long get_free_context(struct mm_struct *mm); +extern void clear_context(unsigned long context); + +/* set the context for a new task to unmapped */ +static inline int init_new_context(struct task_struct *tsk, + struct mm_struct *mm) +{ + mm->context = SUN3_INVALID_CONTEXT; + return 0; +} + +/* find the context given to this process, and if it hasn't already + got one, go get one for it. */ +static inline void get_mmu_context(struct mm_struct *mm) +{ + if (mm->context == SUN3_INVALID_CONTEXT) + mm->context = get_free_context(mm); +} + +/* flush context if allocated... */ +static inline void destroy_context(struct mm_struct *mm) +{ + if (mm->context != SUN3_INVALID_CONTEXT) + clear_context(mm->context); +} + +static inline void activate_context(struct mm_struct *mm) +{ + get_mmu_context(mm); + sun3_put_context(mm->context); +} + +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + activate_context(tsk->mm); +} + +#define deactivate_mm(tsk, mm) do { } while (0) + +static inline void activate_mm(struct mm_struct *prev_mm, + struct mm_struct *next_mm) +{ + activate_context(next_mm); +} + +#else #include <asm/setup.h> #include <asm/page.h> @@ -103,55 +302,8 @@ static inline void activate_mm(struct mm_struct *prev_mm, switch_mm_0460(next_mm); } -#else /* CONFIG_SUN3 */ -#include <asm/sun3mmu.h> -#include <linux/sched.h> - -extern unsigned long get_free_context(struct mm_struct *mm); -extern void clear_context(unsigned long context); - -/* set the context for a new task to unmapped */ -static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm) -{ - mm->context = SUN3_INVALID_CONTEXT; - return 0; -} - -/* find the context given to this process, and if it hasn't already - got one, go get one for it. */ -static inline void get_mmu_context(struct mm_struct *mm) -{ - if(mm->context == SUN3_INVALID_CONTEXT) - mm->context = get_free_context(mm); -} - -/* flush context if allocated... */ -static inline void destroy_context(struct mm_struct *mm) -{ - if(mm->context != SUN3_INVALID_CONTEXT) - clear_context(mm->context); -} - -static inline void activate_context(struct mm_struct *mm) -{ - get_mmu_context(mm); - sun3_put_context(mm->context); -} - -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) -{ - activate_context(tsk->mm); -} - -#define deactivate_mm(tsk,mm) do { } while (0) - -static inline void activate_mm(struct mm_struct *prev_mm, - struct mm_struct *next_mm) -{ - activate_context(next_mm); -} - #endif + #else /* !CONFIG_MMU */ static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm) diff --git a/arch/m68k/include/asm/motorola_pgtable.h b/arch/m68k/include/asm/motorola_pgtable.h index 45bd3f589bf0..e0fdd4d08075 100644 --- a/arch/m68k/include/asm/motorola_pgtable.h +++ b/arch/m68k/include/asm/motorola_pgtable.h @@ -8,6 +8,7 @@ #define _PAGE_PRESENT 0x001 #define _PAGE_SHORT 0x002 #define _PAGE_RONLY 0x004 +#define _PAGE_READWRITE 0x000 #define _PAGE_ACCESSED 0x008 #define _PAGE_DIRTY 0x010 #define _PAGE_SUPER 0x080 /* 68040 supervisor only */ diff --git a/arch/m68k/include/asm/page.h b/arch/m68k/include/asm/page.h index dfebb7c1e379..98baa82a8615 100644 --- a/arch/m68k/include/asm/page.h +++ b/arch/m68k/include/asm/page.h @@ -6,10 +6,10 @@ #include <asm/page_offset.h> /* PAGE_SHIFT determines the page size */ -#ifndef CONFIG_SUN3 -#define PAGE_SHIFT (12) +#if defined(CONFIG_SUN3) || defined(CONFIG_COLDFIRE) +#define PAGE_SHIFT 13 #else -#define PAGE_SHIFT (13) +#define PAGE_SHIFT 12 #endif #define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) @@ -36,6 +36,10 @@ typedef struct page *pgtable_t; #define __pgd(x) ((pgd_t) { (x) } ) #define __pgprot(x) ((pgprot_t) { (x) } ) +extern unsigned long _rambase; +extern unsigned long _ramstart; +extern unsigned long _ramend; + #endif /* !__ASSEMBLY__ */ #ifdef CONFIG_MMU diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h index a8d1c60eb9ce..90595721185f 100644 --- a/arch/m68k/include/asm/page_no.h +++ b/arch/m68k/include/asm/page_no.h @@ -5,9 +5,6 @@ extern unsigned long memory_start; extern unsigned long memory_end; -extern unsigned long _rambase; -extern unsigned long _ramstart; -extern unsigned long _ramend; #define get_user_page(vaddr) __get_free_page(GFP_KERNEL) #define free_user_page(page, addr) free_page(addr) diff --git a/arch/m68k/include/asm/page_offset.h b/arch/m68k/include/asm/page_offset.h index 1780152d81da..82626a8f1d0a 100644 --- a/arch/m68k/include/asm/page_offset.h +++ b/arch/m68k/include/asm/page_offset.h @@ -1,11 +1,9 @@ /* This handles the memory map.. */ -#ifdef CONFIG_MMU -#ifndef CONFIG_SUN3 -#define PAGE_OFFSET_RAW 0x00000000 -#else +#if defined(CONFIG_RAMBASE) +#define PAGE_OFFSET_RAW CONFIG_RAMBASE +#elif defined(CONFIG_SUN3) #define PAGE_OFFSET_RAW 0x0E000000 -#endif #else -#define PAGE_OFFSET_RAW CONFIG_RAMBASE +#define PAGE_OFFSET_RAW 0x00000000 #endif diff --git a/arch/m68k/include/asm/pgalloc.h b/arch/m68k/include/asm/pgalloc.h index c294aad8a900..37bee7e3223d 100644 --- a/arch/m68k/include/asm/pgalloc.h +++ b/arch/m68k/include/asm/pgalloc.h @@ -7,7 +7,9 @@ #ifdef CONFIG_MMU #include <asm/virtconvert.h> -#ifdef CONFIG_SUN3 +#if defined(CONFIG_COLDFIRE) +#include <asm/mcf_pgalloc.h> +#elif defined(CONFIG_SUN3) #include <asm/sun3_pgalloc.h> #else #include <asm/motorola_pgalloc.h> diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h index 87174c904d2b..dc35e0e106e4 100644 --- a/arch/m68k/include/asm/pgtable_mm.h +++ b/arch/m68k/include/asm/pgtable_mm.h @@ -40,6 +40,8 @@ /* PGDIR_SHIFT determines what a third-level page table entry can map */ #ifdef CONFIG_SUN3 #define PGDIR_SHIFT 17 +#elif defined(CONFIG_COLDFIRE) +#define PGDIR_SHIFT 22 #else #define PGDIR_SHIFT 25 #endif @@ -54,6 +56,10 @@ #define PTRS_PER_PTE 16 #define PTRS_PER_PMD 1 #define PTRS_PER_PGD 2048 +#elif defined(CONFIG_COLDFIRE) +#define PTRS_PER_PTE 512 +#define PTRS_PER_PMD 1 +#define PTRS_PER_PGD 1024 #else #define PTRS_PER_PTE 1024 #define PTRS_PER_PMD 8 @@ -66,12 +72,22 @@ #ifdef CONFIG_SUN3 #define KMAP_START 0x0DC00000 #define KMAP_END 0x0E000000 +#elif defined(CONFIG_COLDFIRE) +#define KMAP_START 0xe0000000 +#define KMAP_END 0xf0000000 #else #define KMAP_START 0xd0000000 #define KMAP_END 0xf0000000 #endif -#ifndef CONFIG_SUN3 +#ifdef CONFIG_SUN3 +extern unsigned long m68k_vmalloc_end; +#define VMALLOC_START 0x0f800000 +#define VMALLOC_END m68k_vmalloc_end +#elif defined(CONFIG_COLDFIRE) +#define VMALLOC_START 0xd0000000 +#define VMALLOC_END 0xe0000000 +#else /* Just any arbitrary offset to the start of the vmalloc VM area: the * current 8MB value just means that there will be a 8MB "hole" after the * physical memory until the kernel virtual memory starts. That means that @@ -82,11 +98,7 @@ #define VMALLOC_OFFSET (8*1024*1024) #define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) #define VMALLOC_END KMAP_START -#else -extern unsigned long m68k_vmalloc_end; -#define VMALLOC_START 0x0f800000 -#define VMALLOC_END m68k_vmalloc_end -#endif /* CONFIG_SUN3 */ +#endif /* zero page used for uninitialized stuff */ extern void *empty_zero_page; @@ -130,6 +142,8 @@ static inline void update_mmu_cache(struct vm_area_struct *vma, #ifdef CONFIG_SUN3 #include <asm/sun3_pgtable.h> +#elif defined(CONFIG_COLDFIRE) +#include <asm/mcf_pgtable.h> #else #include <asm/motorola_pgtable.h> #endif @@ -138,6 +152,9 @@ static inline void update_mmu_cache(struct vm_area_struct *vma, /* * Macro to mark a page protection value as "uncacheable". */ +#ifdef CONFIG_COLDFIRE +# define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | CF_PAGE_NOCACHE)) +#else #ifdef SUN3_PAGE_NOCACHE # define __SUN3_PAGE_NOCACHE SUN3_PAGE_NOCACHE #else @@ -152,6 +169,7 @@ static inline void update_mmu_cache(struct vm_area_struct *vma, ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S)) \ : (prot))) +#endif /* CONFIG_COLDFIRE */ #include <asm-generic/pgtable.h> #endif /* !__ASSEMBLY__ */ diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h index 568facf30276..46460fa15d5c 100644 --- a/arch/m68k/include/asm/processor.h +++ b/arch/m68k/include/asm/processor.h @@ -48,10 +48,12 @@ static inline void wrusp(unsigned long usp) * so don't change it unless you know what you are doing. */ #ifdef CONFIG_MMU -#ifndef CONFIG_SUN3 -#define TASK_SIZE (0xF0000000UL) -#else +#if defined(CONFIG_COLDFIRE) +#define TASK_SIZE (0xC0000000UL) +#elif defined(CONFIG_SUN3) #define TASK_SIZE (0x0E000000UL) +#else +#define TASK_SIZE (0xF0000000UL) #endif #else #define TASK_SIZE (0xFFFFFFFFUL) @@ -66,10 +68,12 @@ static inline void wrusp(unsigned long usp) * space during mmap's. */ #ifdef CONFIG_MMU -#ifndef CONFIG_SUN3 -#define TASK_UNMAPPED_BASE 0xC0000000UL -#else +#if defined(CONFIG_COLDFIRE) +#define TASK_UNMAPPED_BASE 0x60000000UL +#elif defined(CONFIG_SUN3) #define TASK_UNMAPPED_BASE 0x0A000000UL +#else +#define TASK_UNMAPPED_BASE 0xC0000000UL #endif #define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr) #else @@ -88,14 +92,12 @@ struct thread_struct { unsigned long fp[8*3]; unsigned long fpcntl[3]; /* fp control regs */ unsigned char fpstate[FPSTATESIZE]; /* floating point state */ - struct thread_info info; }; #define INIT_THREAD { \ .ksp = sizeof(init_stack) + (unsigned long) init_stack, \ .sr = PS_S, \ .fs = __KERNEL_DS, \ - .info = INIT_THREAD_INFO(init_task), \ } #ifdef CONFIG_MMU diff --git a/arch/m68k/include/asm/segment.h b/arch/m68k/include/asm/segment.h index ee959219fdfe..0fa80e97ed2d 100644 --- a/arch/m68k/include/asm/segment.h +++ b/arch/m68k/include/asm/segment.h @@ -22,23 +22,26 @@ typedef struct { } mm_segment_t; #define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) -#define USER_DS MAKE_MM_SEG(__USER_DS) -#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS) +#ifdef CONFIG_CPU_HAS_ADDRESS_SPACES /* * Get/set the SFC/DFC registers for MOVES instructions */ +#define USER_DS MAKE_MM_SEG(__USER_DS) +#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS) static inline mm_segment_t get_fs(void) { -#ifdef CONFIG_MMU mm_segment_t _v; __asm__ ("movec %/dfc,%0":"=r" (_v.seg):); - return _v; -#else - return USER_DS; -#endif +} + +static inline void set_fs(mm_segment_t val) +{ + __asm__ __volatile__ ("movec %0,%/sfc\n\t" + "movec %0,%/dfc\n\t" + : /* no outputs */ : "r" (val.seg) : "memory"); } static inline mm_segment_t get_ds(void) @@ -47,14 +50,13 @@ static inline mm_segment_t get_ds(void) return KERNEL_DS; } -static inline void set_fs(mm_segment_t val) -{ -#ifdef CONFIG_MMU - __asm__ __volatile__ ("movec %0,%/sfc\n\t" - "movec %0,%/dfc\n\t" - : /* no outputs */ : "r" (val.seg) : "memory"); +#else +#define USER_DS MAKE_MM_SEG(TASK_SIZE) +#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) +#define get_ds() (KERNEL_DS) +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) #endif -} #define segment_eq(a,b) ((a).seg == (b).seg) diff --git a/arch/m68k/include/asm/serial.h b/arch/m68k/include/asm/serial.h index 2b90d6e69070..7267536adbcc 100644 --- a/arch/m68k/include/asm/serial.h +++ b/arch/m68k/include/asm/serial.h @@ -25,9 +25,11 @@ #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF #endif +#ifdef CONFIG_ISA #define SERIAL_PORT_DFNS \ /* UART CLK PORT IRQ FLAGS */ \ { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ +#endif diff --git a/arch/m68k/include/asm/setup.h b/arch/m68k/include/asm/setup.h index 4dfb3952b375..00c2c5397d37 100644 --- a/arch/m68k/include/asm/setup.h +++ b/arch/m68k/include/asm/setup.h @@ -40,6 +40,7 @@ #define MACH_HP300 9 #define MACH_Q40 10 #define MACH_SUN3X 11 +#define MACH_M54XX 12 #define COMMAND_LINE_SIZE 256 @@ -211,23 +212,27 @@ extern unsigned long m68k_machtype; #define CPUB_68030 1 #define CPUB_68040 2 #define CPUB_68060 3 +#define CPUB_COLDFIRE 4 #define CPU_68020 (1<<CPUB_68020) #define CPU_68030 (1<<CPUB_68030) #define CPU_68040 (1<<CPUB_68040) #define CPU_68060 (1<<CPUB_68060) +#define CPU_COLDFIRE (1<<CPUB_COLDFIRE) #define FPUB_68881 0 #define FPUB_68882 1 #define FPUB_68040 2 /* Internal FPU */ #define FPUB_68060 3 /* Internal FPU */ #define FPUB_SUNFPA 4 /* Sun-3 FPA */ +#define FPUB_COLDFIRE 5 /* ColdFire FPU */ #define FPU_68881 (1<<FPUB_68881) #define FPU_68882 (1<<FPUB_68882) #define FPU_68040 (1<<FPUB_68040) #define FPU_68060 (1<<FPUB_68060) #define FPU_SUNFPA (1<<FPUB_SUNFPA) +#define FPU_COLDFIRE (1<<FPUB_COLDFIRE) #define MMUB_68851 0 #define MMUB_68030 1 /* Internal MMU */ @@ -235,6 +240,7 @@ extern unsigned long m68k_machtype; #define MMUB_68060 3 /* Internal MMU */ #define MMUB_APOLLO 4 /* Custom Apollo */ #define MMUB_SUN3 5 /* Custom Sun-3 */ +#define MMUB_COLDFIRE 6 /* Internal MMU */ #define MMU_68851 (1<<MMUB_68851) #define MMU_68030 (1<<MMUB_68030) @@ -242,6 +248,7 @@ extern unsigned long m68k_machtype; #define MMU_68060 (1<<MMUB_68060) #define MMU_SUN3 (1<<MMUB_SUN3) #define MMU_APOLLO (1<<MMUB_APOLLO) +#define MMU_COLDFIRE (1<<MMUB_COLDFIRE) #ifdef __KERNEL__ @@ -341,6 +348,13 @@ extern int m68k_is040or060; # endif #endif +#if !defined(CONFIG_COLDFIRE) +# define CPU_IS_COLDFIRE (0) +#else +# define CPU_IS_COLDFIRE (1) +# define MMU_IS_COLDFIRE (1) +#endif + #define CPU_TYPE (m68k_cputype) #ifdef CONFIG_M68KFPU_EMU diff --git a/arch/m68k/include/asm/sigcontext.h b/arch/m68k/include/asm/sigcontext.h index a29dd74a17cb..523db2a51cf3 100644 --- a/arch/m68k/include/asm/sigcontext.h +++ b/arch/m68k/include/asm/sigcontext.h @@ -15,11 +15,7 @@ struct sigcontext { unsigned long sc_pc; unsigned short sc_formatvec; #ifndef __uClinux__ -# ifdef __mcoldfire__ - unsigned long sc_fpregs[2][2]; /* room for two fp registers */ -# else unsigned long sc_fpregs[2*3]; /* room for two fp registers */ -# endif unsigned long sc_fpcntl[3]; unsigned char sc_fpstate[216]; #endif diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/asm/socket.h index 9bf49c87d954..d4708ce466e0 100644 --- a/arch/m68k/include/asm/socket.h +++ b/arch/m68k/include/asm/socket.h @@ -62,4 +62,7 @@ #define SO_RXQ_OVFL 40 +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS + #endif /* _ASM_SOCKET_H */ diff --git a/arch/m68k/include/asm/thread_info.h b/arch/m68k/include/asm/thread_info.h index 790988967ba7..e8665e6f9464 100644 --- a/arch/m68k/include/asm/thread_info.h +++ b/arch/m68k/include/asm/thread_info.h @@ -3,6 +3,7 @@ #include <asm/types.h> #include <asm/page.h> +#include <asm/segment.h> /* * On machines with 4k pages we default to an 8k thread size, though we @@ -26,6 +27,7 @@ struct thread_info { struct task_struct *task; /* main task structure */ unsigned long flags; struct exec_domain *exec_domain; /* execution domain */ + mm_segment_t addr_limit; /* thread address space */ int preempt_count; /* 0 => preemptable, <0 => BUG */ __u32 cpu; /* should always be 0 on m68k */ unsigned long tp_value; /* thread pointer */ @@ -39,6 +41,7 @@ struct thread_info { { \ .task = &tsk, \ .exec_domain = &default_exec_domain, \ + .addr_limit = KERNEL_DS, \ .preempt_count = INIT_PREEMPT_COUNT, \ .restart_block = { \ .fn = do_no_restart_syscall, \ @@ -47,34 +50,6 @@ struct thread_info { #define init_stack (init_thread_union.stack) -#ifdef CONFIG_MMU - -#ifndef __ASSEMBLY__ -#include <asm/current.h> -#endif - -#ifdef ASM_OFFSETS_C -#define task_thread_info(tsk) ((struct thread_info *) NULL) -#else -#include <asm/asm-offsets.h> -#define task_thread_info(tsk) ((struct thread_info *)((char *)tsk+TASK_TINFO)) -#endif - -#define init_thread_info (init_task.thread.info) -#define task_stack_page(tsk) ((tsk)->stack) -#define current_thread_info() task_thread_info(current) - -#define __HAVE_THREAD_FUNCTIONS - -#define setup_thread_stack(p, org) ({ \ - *(struct task_struct **)(p)->stack = (p); \ - task_thread_info(p)->task = (p); \ -}) - -#define end_of_stack(p) ((unsigned long *)(p)->stack + 1) - -#else /* !CONFIG_MMU */ - #ifndef __ASSEMBLY__ /* how to get the thread information struct from C */ static inline struct thread_info *current_thread_info(void) @@ -92,8 +67,6 @@ static inline struct thread_info *current_thread_info(void) #define init_thread_info (init_thread_union.thread_info) -#endif /* CONFIG_MMU */ - /* entry.S relies on these definitions! * bits 0-7 are tested at every exception exit * bits 8-15 are also tested at syscall exit @@ -103,7 +76,6 @@ static inline struct thread_info *current_thread_info(void) #define TIF_DELAYED_TRACE 14 /* single step a syscall */ #define TIF_SYSCALL_TRACE 15 /* syscall trace active */ #define TIF_MEMDIE 16 /* is terminating due to OOM killer */ -#define TIF_FREEZE 17 /* thread is freezing for suspend */ #define TIF_RESTORE_SIGMASK 18 /* restore signal mask in do_signal */ #endif /* _ASM_M68K_THREAD_INFO_H */ diff --git a/arch/m68k/include/asm/tlbflush.h b/arch/m68k/include/asm/tlbflush.h index a6b4ed4fc90f..965ea35c9a40 100644 --- a/arch/m68k/include/asm/tlbflush.h +++ b/arch/m68k/include/asm/tlbflush.h @@ -5,10 +5,13 @@ #ifndef CONFIG_SUN3 #include <asm/current.h> +#include <asm/mcfmmu.h> static inline void flush_tlb_kernel_page(void *addr) { - if (CPU_IS_040_OR_060) { + if (CPU_IS_COLDFIRE) { + mmu_write(MMUOR, MMUOR_CNL); + } else if (CPU_IS_040_OR_060) { mm_segment_t old_fs = get_fs(); set_fs(KERNEL_DS); __asm__ __volatile__(".chip 68040\n\t" @@ -25,12 +28,15 @@ static inline void flush_tlb_kernel_page(void *addr) */ static inline void __flush_tlb(void) { - if (CPU_IS_040_OR_060) + if (CPU_IS_COLDFIRE) { + mmu_write(MMUOR, MMUOR_CNL); + } else if (CPU_IS_040_OR_060) { __asm__ __volatile__(".chip 68040\n\t" "pflushan\n\t" ".chip 68k"); - else if (CPU_IS_020_OR_030) + } else if (CPU_IS_020_OR_030) { __asm__ __volatile__("pflush #0,#4"); + } } static inline void __flush_tlb040_one(unsigned long addr) @@ -43,7 +49,9 @@ static inline void __flush_tlb040_one(unsigned long addr) static inline void __flush_tlb_one(unsigned long addr) { - if (CPU_IS_040_OR_060) + if (CPU_IS_COLDFIRE) + mmu_write(MMUOR, MMUOR_CNL); + else if (CPU_IS_040_OR_060) __flush_tlb040_one(addr); else if (CPU_IS_020_OR_030) __asm__ __volatile__("pflush #0,#4,(%0)" : : "a" (addr)); @@ -56,12 +64,15 @@ static inline void __flush_tlb_one(unsigned long addr) */ static inline void flush_tlb_all(void) { - if (CPU_IS_040_OR_060) + if (CPU_IS_COLDFIRE) { + mmu_write(MMUOR, MMUOR_CNL); + } else if (CPU_IS_040_OR_060) { __asm__ __volatile__(".chip 68040\n\t" "pflusha\n\t" ".chip 68k"); - else if (CPU_IS_020_OR_030) + } else if (CPU_IS_020_OR_030) { __asm__ __volatile__("pflusha"); + } } static inline void flush_tlb_mm(struct mm_struct *mm) diff --git a/arch/m68k/include/asm/traps.h b/arch/m68k/include/asm/traps.h index 151068f64f44..4aff3358fbaf 100644 --- a/arch/m68k/include/asm/traps.h +++ b/arch/m68k/include/asm/traps.h @@ -18,6 +18,7 @@ typedef void (*e_vector)(void); extern e_vector vectors[]; +extern e_vector *_ramvec; asmlinkage void auto_inthandler(void); asmlinkage void user_inthandler(void); diff --git a/arch/m68k/include/asm/types.h b/arch/m68k/include/asm/types.h index b17fd115a4e7..89705adcbd52 100644 --- a/arch/m68k/include/asm/types.h +++ b/arch/m68k/include/asm/types.h @@ -10,12 +10,6 @@ */ #include <asm-generic/int-ll64.h> -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - /* * These aren't exported outside the kernel to avoid name space clashes */ diff --git a/arch/m68k/include/asm/uaccess_mm.h b/arch/m68k/include/asm/uaccess_mm.h index 7107f3fbdbb6..9c80cd515b20 100644 --- a/arch/m68k/include/asm/uaccess_mm.h +++ b/arch/m68k/include/asm/uaccess_mm.h @@ -21,6 +21,22 @@ static inline int access_ok(int type, const void __user *addr, } /* + * Not all varients of the 68k family support the notion of address spaces. + * The traditional 680x0 parts do, and they use the sfc/dfc registers and + * the "moves" instruction to access user space from kernel space. Other + * family members like ColdFire don't support this, and only have a single + * address space, and use the usual "move" instruction for user space access. + * + * Outside of this difference the user space access functions are the same. + * So lets keep the code simple and just define in what we need to use. + */ +#ifdef CONFIG_CPU_HAS_ADDRESS_SPACES +#define MOVES "moves" +#else +#define MOVES "move" +#endif + +/* * The exception table consists of pairs of addresses: the first is the * address of an instruction that is allowed to fault, and the second is * the address at which the program should continue. No registers are @@ -43,7 +59,7 @@ extern int __get_user_bad(void); #define __put_user_asm(res, x, ptr, bwl, reg, err) \ asm volatile ("\n" \ - "1: moves."#bwl" %2,%1\n" \ + "1: "MOVES"."#bwl" %2,%1\n" \ "2:\n" \ " .section .fixup,\"ax\"\n" \ " .even\n" \ @@ -83,8 +99,8 @@ asm volatile ("\n" \ { \ const void __user *__pu_ptr = (ptr); \ asm volatile ("\n" \ - "1: moves.l %2,(%1)+\n" \ - "2: moves.l %R2,(%1)\n" \ + "1: "MOVES".l %2,(%1)+\n" \ + "2: "MOVES".l %R2,(%1)\n" \ "3:\n" \ " .section .fixup,\"ax\"\n" \ " .even\n" \ @@ -115,12 +131,12 @@ asm volatile ("\n" \ #define __get_user_asm(res, x, ptr, type, bwl, reg, err) ({ \ type __gu_val; \ asm volatile ("\n" \ - "1: moves."#bwl" %2,%1\n" \ + "1: "MOVES"."#bwl" %2,%1\n" \ "2:\n" \ " .section .fixup,\"ax\"\n" \ " .even\n" \ "10: move.l %3,%0\n" \ - " sub."#bwl" %1,%1\n" \ + " sub.l %1,%1\n" \ " jra 2b\n" \ " .previous\n" \ "\n" \ @@ -152,8 +168,8 @@ asm volatile ("\n" \ const void *__gu_ptr = (ptr); \ u64 __gu_val; \ asm volatile ("\n" \ - "1: moves.l (%2)+,%1\n" \ - "2: moves.l (%2),%R1\n" \ + "1: "MOVES".l (%2)+,%1\n" \ + "2: "MOVES".l (%2),%R1\n" \ "3:\n" \ " .section .fixup,\"ax\"\n" \ " .even\n" \ @@ -188,12 +204,12 @@ unsigned long __generic_copy_to_user(void __user *to, const void *from, unsigned #define __constant_copy_from_user_asm(res, to, from, tmp, n, s1, s2, s3)\ asm volatile ("\n" \ - "1: moves."#s1" (%2)+,%3\n" \ + "1: "MOVES"."#s1" (%2)+,%3\n" \ " move."#s1" %3,(%1)+\n" \ - "2: moves."#s2" (%2)+,%3\n" \ + "2: "MOVES"."#s2" (%2)+,%3\n" \ " move."#s2" %3,(%1)+\n" \ " .ifnc \""#s3"\",\"\"\n" \ - "3: moves."#s3" (%2)+,%3\n" \ + "3: "MOVES"."#s3" (%2)+,%3\n" \ " move."#s3" %3,(%1)+\n" \ " .endif\n" \ "4:\n" \ @@ -269,13 +285,13 @@ __constant_copy_from_user(void *to, const void __user *from, unsigned long n) #define __constant_copy_to_user_asm(res, to, from, tmp, n, s1, s2, s3) \ asm volatile ("\n" \ " move."#s1" (%2)+,%3\n" \ - "11: moves."#s1" %3,(%1)+\n" \ + "11: "MOVES"."#s1" %3,(%1)+\n" \ "12: move."#s2" (%2)+,%3\n" \ - "21: moves."#s2" %3,(%1)+\n" \ + "21: "MOVES"."#s2" %3,(%1)+\n" \ "22:\n" \ " .ifnc \""#s3"\",\"\"\n" \ " move."#s3" (%2)+,%3\n" \ - "31: moves."#s3" %3,(%1)+\n" \ + "31: "MOVES"."#s3" %3,(%1)+\n" \ "32:\n" \ " .endif\n" \ "4:\n" \ diff --git a/arch/m68k/include/asm/ucontext.h b/arch/m68k/include/asm/ucontext.h index 00dcc5176c57..e4e22669edc0 100644 --- a/arch/m68k/include/asm/ucontext.h +++ b/arch/m68k/include/asm/ucontext.h @@ -7,11 +7,7 @@ typedef greg_t gregset_t[NGREG]; typedef struct fpregset { int f_fpcntl[3]; -#ifdef __mcoldfire__ - int f_fpregs[8][2]; -#else int f_fpregs[8*3]; -#endif } fpregset_t; struct mcontext { diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 43f984e93970..ea0b502f845e 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -132,10 +132,10 @@ #define __NR_adjtimex 124 #define __NR_mprotect 125 #define __NR_sigprocmask 126 -/*#define __NR_create_module 127*/ +#define __NR_create_module 127 #define __NR_init_module 128 #define __NR_delete_module 129 -/*#define __NR_get_kernel_syms 130*/ +#define __NR_get_kernel_syms 130 #define __NR_quotactl 131 #define __NR_getpgid 132 #define __NR_fchdir 133 @@ -172,7 +172,7 @@ #define __NR_setresuid 164 #define __NR_getresuid 165 #define __NR_getpagesize 166 -/*#define __NR_query_module 167*/ +#define __NR_query_module 167 #define __NR_poll 168 #define __NR_nfsservctl 169 #define __NR_setresgid 170 @@ -193,8 +193,8 @@ #define __NR_capset 185 #define __NR_sigaltstack 186 #define __NR_sendfile 187 -/*#define __NR_getpmsg 188*/ /* some people actually want streams */ -/*#define __NR_putpmsg 189*/ /* some people actually want streams */ +#define __NR_getpmsg 188 /* some people actually want streams */ +#define __NR_putpmsg 189 /* some people actually want streams */ #define __NR_vfork 190 #define __NR_ugetrlimit 191 #define __NR_mmap2 192 @@ -350,10 +350,12 @@ #define __NR_clock_adjtime 342 #define __NR_syncfs 343 #define __NR_setns 344 +#define __NR_process_vm_readv 345 +#define __NR_process_vm_writev 346 #ifdef __KERNEL__ -#define NR_syscalls 345 +#define NR_syscalls 347 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile index c5696193281a..40d29a788b05 100644 --- a/arch/m68k/kernel/Makefile +++ b/arch/m68k/kernel/Makefile @@ -2,19 +2,24 @@ # Makefile for the linux kernel. # -extra-$(CONFIG_MMU) := head.o +extra-$(CONFIG_AMIGA) := head.o +extra-$(CONFIG_ATARI) := head.o +extra-$(CONFIG_MAC) := head.o +extra-$(CONFIG_APOLLO) := head.o +extra-$(CONFIG_VME) := head.o +extra-$(CONFIG_HP300) := head.o +extra-$(CONFIG_Q40) := head.o +extra-$(CONFIG_SUN3X) := head.o extra-$(CONFIG_SUN3) := sun3-head.o extra-y += vmlinux.lds -obj-y := entry.o irq.o m68k_ksyms.o module.o process.o ptrace.o setup.o \ - signal.o sys_m68k.o syscalltable.o time.o traps.o +obj-y := entry.o init_task.o irq.o m68k_ksyms.o module.o process.o ptrace.o +obj-y += setup.o signal.o sys_m68k.o syscalltable.o time.o traps.o -obj-$(CONFIG_MMU) += ints.o vectors.o +obj-$(CONFIG_MMU_MOTOROLA) += ints.o vectors.o +obj-$(CONFIG_MMU_SUN3) += ints.o vectors.o ifndef CONFIG_MMU_SUN3 -obj-y += dma.o -endif -ifndef CONFIG_MMU -obj-y += init_task.o +obj-y += dma.o endif diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c index 983fed9d469b..a972b00cd77d 100644 --- a/arch/m68k/kernel/asm-offsets.c +++ b/arch/m68k/kernel/asm-offsets.c @@ -24,8 +24,7 @@ int main(void) /* offsets into the task struct */ DEFINE(TASK_THREAD, offsetof(struct task_struct, thread)); DEFINE(TASK_MM, offsetof(struct task_struct, mm)); - DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info)); - DEFINE(TASK_TINFO, offsetof(struct task_struct, thread.info)); + DEFINE(TASK_STACK, offsetof(struct task_struct, stack)); /* offsets into the thread struct */ DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp)); diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index 081cf96f243b..b8daf64e347d 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -1,4 +1,4 @@ -#ifdef CONFIG_MMU +#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE) #include "entry_mm.S" #else #include "entry_no.S" diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S index c713f514843d..675a854966a6 100644 --- a/arch/m68k/kernel/entry_mm.S +++ b/arch/m68k/kernel/entry_mm.S @@ -99,7 +99,8 @@ do_trace_exit: jra .Lret_from_exception ENTRY(ret_from_signal) - tstb %curptr@(TASK_INFO+TINFO_FLAGS+2) + movel %curptr@(TASK_STACK),%a1 + tstb %a1@(TINFO_FLAGS+2) jge 1f jbsr syscall_trace 1: RESTORE_SWITCH_STACK @@ -120,11 +121,13 @@ ENTRY(system_call) SAVE_ALL_SYS GET_CURRENT(%d1) + movel %d1,%a1 + | save top of frame movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0) | syscall trace? - tstb %curptr@(TASK_INFO+TINFO_FLAGS+2) + tstb %a1@(TINFO_FLAGS+2) jmi do_trace_entry cmpl #NR_syscalls,%d0 jcc badsys @@ -133,7 +136,8 @@ syscall: movel %d0,%sp@(PT_OFF_D0) | save the return value ret_from_syscall: |oriw #0x0700,%sr - movew %curptr@(TASK_INFO+TINFO_FLAGS+2),%d0 + movel %curptr@(TASK_STACK),%a1 + movew %a1@(TINFO_FLAGS+2),%d0 jne syscall_exit_work 1: RESTORE_ALL @@ -159,7 +163,8 @@ ENTRY(ret_from_exception) andw #ALLOWINT,%sr resume_userspace: - moveb %curptr@(TASK_INFO+TINFO_FLAGS+3),%d0 + movel %curptr@(TASK_STACK),%a1 + moveb %a1@(TINFO_FLAGS+3),%d0 jne exit_work 1: RESTORE_ALL @@ -199,7 +204,8 @@ do_delayed_trace: ENTRY(auto_inthandler) SAVE_ALL_INT GET_CURRENT(%d0) - addqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1) + movel %d0,%a1 + addqb #1,%a1@(TINFO_PREEMPT+1) | put exception # in d0 bfextu %sp@(PT_OFF_FORMATVEC){#4,#10},%d0 subw #VEC_SPUR,%d0 @@ -211,7 +217,8 @@ auto_irqhandler_fixup = . + 2 addql #8,%sp | pop parameters off stack ret_from_interrupt: - subqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1) + movel %curptr@(TASK_STACK),%a1 + subqb #1,%a1@(TINFO_PREEMPT+1) jeq ret_from_last_interrupt 2: RESTORE_ALL @@ -232,7 +239,8 @@ ret_from_last_interrupt: ENTRY(user_inthandler) SAVE_ALL_INT GET_CURRENT(%d0) - addqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1) + movel %d0,%a1 + addqb #1,%a1@(TINFO_PREEMPT+1) | put exception # in d0 bfextu %sp@(PT_OFF_FORMATVEC){#4,#10},%d0 user_irqvec_fixup = . + 2 @@ -243,7 +251,8 @@ user_irqvec_fixup = . + 2 jsr do_IRQ | process the IRQ addql #8,%sp | pop parameters off stack - subqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1) + movel %curptr@(TASK_STACK),%a1 + subqb #1,%a1@(TINFO_PREEMPT+1) jeq ret_from_last_interrupt RESTORE_ALL @@ -252,13 +261,15 @@ user_irqvec_fixup = . + 2 ENTRY(bad_inthandler) SAVE_ALL_INT GET_CURRENT(%d0) - addqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1) + movel %d0,%a1 + addqb #1,%a1@(TINFO_PREEMPT+1) movel %sp,%sp@- jsr handle_badint addql #4,%sp - subqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1) + movel %curptr@(TASK_STACK),%a1 + subqb #1,%a1@(TINFO_PREEMPT+1) jeq ret_from_last_interrupt RESTORE_ALL diff --git a/arch/m68k/kernel/entry_no.S b/arch/m68k/kernel/entry_no.S index 1b4289061a64..d80cba45589f 100644 --- a/arch/m68k/kernel/entry_no.S +++ b/arch/m68k/kernel/entry_no.S @@ -44,8 +44,7 @@ ENTRY(buserr) SAVE_ALL_INT - moveq #-1,%d0 - movel %d0,%sp@(PT_OFF_ORIG_D0) + GET_CURRENT(%d0) movel %sp,%sp@- /* stack frame pointer argument */ jsr buserr_c addql #4,%sp @@ -53,8 +52,7 @@ ENTRY(buserr) ENTRY(trap) SAVE_ALL_INT - moveq #-1,%d0 - movel %d0,%sp@(PT_OFF_ORIG_D0) + GET_CURRENT(%d0) movel %sp,%sp@- /* stack frame pointer argument */ jsr trap_c addql #4,%sp @@ -65,8 +63,7 @@ ENTRY(trap) .globl dbginterrupt ENTRY(dbginterrupt) SAVE_ALL_INT - moveq #-1,%d0 - movel %d0,%sp@(PT_OFF_ORIG_D0) + GET_CURRENT(%d0) movel %sp,%sp@- /* stack frame pointer argument */ jsr dbginterrupt_c addql #4,%sp diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S index 27622b3273c1..d197e7ff62c5 100644 --- a/arch/m68k/kernel/head.S +++ b/arch/m68k/kernel/head.S @@ -250,9 +250,8 @@ * USE_MFP: Use the ST-MFP port (Modem1) for serial debug. * * Macintosh constants: - * MAC_SERIAL_DEBUG: Turns on serial debug output for the Macintosh. - * MAC_USE_SCC_A: Use the SCC port A (modem) for serial debug. - * MAC_USE_SCC_B: Use the SCC port B (printer) for serial debug (default). + * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug and early console. + * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug and early console. */ #include <linux/linkage.h> @@ -268,33 +267,25 @@ #include <asm/machw.h> -/* - * Macintosh console support - */ - #ifdef CONFIG_FRAMEBUFFER_CONSOLE #define CONSOLE #define CONSOLE_PENGUIN #endif -/* - * Macintosh serial debug support; outputs boot info to the printer - * and/or modem serial ports - */ -#undef MAC_SERIAL_DEBUG +#ifdef CONFIG_EARLY_PRINTK +#define SERIAL_DEBUG +#else +#undef SERIAL_DEBUG +#endif -/* - * Macintosh serial debug port selection; define one or both; - * requires MAC_SERIAL_DEBUG to be defined - */ -#define MAC_USE_SCC_A /* Macintosh modem serial port */ -#define MAC_USE_SCC_B /* Macintosh printer serial port */ +#else /* !CONFIG_MAC */ -#endif /* CONFIG_MAC */ +#define SERIAL_DEBUG + +#endif /* !CONFIG_MAC */ #undef MMU_PRINT #undef MMU_NOCACHE_KERNEL -#define SERIAL_DEBUG #undef DEBUG /* @@ -655,11 +646,11 @@ ENTRY(__start) lea %pc@(L(mac_rowbytes)),%a1 movel %a0@,%a1@ -#ifdef MAC_SERIAL_DEBUG +#ifdef SERIAL_DEBUG get_bi_record BI_MAC_SCCBASE lea %pc@(L(mac_sccbase)),%a1 movel %a0@,%a1@ -#endif /* MAC_SERIAL_DEBUG */ +#endif #if 0 /* @@ -1427,7 +1418,7 @@ L(mmu_fixup_done): subl %d0,L(console_font) subl %d0,L(console_font_data) #endif -#ifdef MAC_SERIAL_DEBUG +#ifdef SERIAL_DEBUG orl #0x50000000,L(mac_sccbase) #endif 1: @@ -1917,7 +1908,7 @@ mmu_030_print: jbne 30b mmu_print_done: - puts "\n\n" + puts "\n" func_return mmu_print @@ -2768,7 +2759,7 @@ L(scc_initable_mac): .byte 9,0 /* no interrupts */ .byte 10,0 /* NRZ */ .byte 11,0x50 /* use baud rate generator */ - .byte 12,10,13,0 /* 9600 baud */ + .byte 12,1,13,0 /* 38400 baud */ .byte 14,1 /* Baud rate generator enable */ .byte 3,0xc1 /* enable receiver */ .byte 5,0xea /* enable transmitter */ @@ -2906,10 +2897,12 @@ func_start serial_init,%d0/%d1/%a0/%a1 #endif #ifdef CONFIG_MAC is_not_mac(L(serial_init_not_mac)) -#ifdef MAC_SERIAL_DEBUG -#if !defined(MAC_USE_SCC_A) && !defined(MAC_USE_SCC_B) -#define MAC_USE_SCC_B -#endif + +#ifdef SERIAL_DEBUG +/* You may define either or both of these. */ +#define MAC_USE_SCC_A /* Modem port */ +#define MAC_USE_SCC_B /* Printer port */ + #define mac_scc_cha_b_ctrl_offset 0x0 #define mac_scc_cha_a_ctrl_offset 0x2 #define mac_scc_cha_b_data_offset 0x4 @@ -2940,7 +2933,7 @@ func_start serial_init,%d0/%d1/%a0/%a1 jra 7b 8: #endif /* MAC_USE_SCC_B */ -#endif /* MAC_SERIAL_DEBUG */ +#endif /* SERIAL_DEBUG */ jra L(serial_init_done) L(serial_init_not_mac): @@ -3011,7 +3004,7 @@ func_start serial_putc,%d0/%d1/%a0/%a1 #ifdef CONFIG_MAC is_not_mac(5f) -#ifdef MAC_SERIAL_DEBUG +#ifdef SERIAL_DEBUG #ifdef MAC_USE_SCC_A movel %pc@(L(mac_sccbase)),%a1 @@ -3029,7 +3022,7 @@ func_start serial_putc,%d0/%d1/%a0/%a1 moveb %d0,%a1@(mac_scc_cha_b_data_offset) #endif /* MAC_USE_SCC_B */ -#endif /* MAC_SERIAL_DEBUG */ +#endif /* SERIAL_DEBUG */ jra L(serial_putc_done) 5: @@ -3248,33 +3241,39 @@ func_return putn #ifdef CONFIG_MAC /* - * mac_serial_print + * mac_early_print * * This routine takes its parameters on the stack. It then - * turns around and calls the internal routine. This routine - * is used until the Linux console driver initializes itself. + * turns around and calls the internal routines. This routine + * is used by the boot console. * * The calling parameters are: - * void mac_serial_print(const char *str); + * void mac_early_print(const char *str, unsigned length); * * This routine does NOT understand variable arguments only * simple strings! */ -ENTRY(mac_serial_print) - moveml %d0/%a0,%sp@- -#if 1 - move %sr,%sp@- +ENTRY(mac_early_print) + moveml %d0/%d1/%a0,%sp@- + movew %sr,%sp@- ori #0x0700,%sr -#endif - movel %sp@(10),%a0 /* fetch parameter */ + movel %sp@(18),%a0 /* fetch parameter */ + movel %sp@(22),%d1 /* fetch parameter */ jra 2f -1: serial_putc %d0 -2: moveb %a0@+,%d0 - jne 1b -#if 1 - move %sp@+,%sr +1: +#ifdef CONSOLE + console_putc %d0 #endif - moveml %sp@+,%d0/%a0 +#ifdef SERIAL_DEBUG + serial_putc %d0 +#endif + subq #1,%d1 +2: jeq 3f + moveb %a0@+,%d0 + jne 1b +3: + movew %sp@+,%sr + moveml %sp@+,%d0/%d1/%a0 rts #endif /* CONFIG_MAC */ @@ -3409,10 +3408,10 @@ func_start console_put_stats,%a0/%d7 * a0 = pointer to boot_info * d7 = value of boot_info fields */ - puts "\nMacLinux\n\n" + puts "\nMacLinux\n" #ifdef SERIAL_DEBUG - puts " vidaddr:" + puts "\n vidaddr:" putn %pc@(L(mac_videobase)) /* video addr. */ puts "\n _stext:" @@ -3423,19 +3422,21 @@ func_start console_put_stats,%a0/%d7 lea %pc@(_end),%a0 putn %a0 - puts "\ncpuid:" + puts "\n cpuid:" putn %pc@(L(cputype)) - putc '\n' -#ifdef MAC_SERIAL_DEBUG +# ifdef CONFIG_MAC + puts "\n sccbase:" putn %pc@(L(mac_sccbase)) +# endif +# ifdef MMU_PRINT putc '\n' -#endif -# if defined(MMU_PRINT) jbsr mmu_print_machine_cpu_types -# endif /* MMU_PRINT */ +# endif #endif /* SERIAL_DEBUG */ + putc '\n' + func_return console_put_stats #ifdef CONSOLE_PENGUIN @@ -3896,11 +3897,11 @@ L(mac_dimensions): .long 0 L(mac_rowbytes): .long 0 -#ifdef MAC_SERIAL_DEBUG +#ifdef SERIAL_DEBUG L(mac_sccbase): .long 0 -#endif /* MAC_SERIAL_DEBUG */ #endif +#endif /* CONFIG_MAC */ #if defined (CONFIG_APOLLO) LSRB0 = 0x10412 diff --git a/arch/m68k/kernel/init_task.c b/arch/m68k/kernel/init_task.c index cbf9dc3cc51d..c744cfc6bfa1 100644 --- a/arch/m68k/kernel/init_task.c +++ b/arch/m68k/kernel/init_task.c @@ -19,7 +19,6 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); * * All other task structs will be allocated on slabs in fork.c */ -__asm__(".align 4"); struct task_struct init_task = INIT_TASK(init_task); EXPORT_SYMBOL(init_task); @@ -27,7 +26,7 @@ EXPORT_SYMBOL(init_task); /* * Initial thread structure. * - * We need to make sure that this is 8192-byte aligned due to the + * We need to make sure that this is THREAD size aligned due to the * way process stacks are handled. This is done by having a special * "init_task" linker map entry.. */ diff --git a/arch/m68k/kernel/m68k_ksyms.c b/arch/m68k/kernel/m68k_ksyms.c index 1b7a14d1a000..774c1bd59c36 100644 --- a/arch/m68k/kernel/m68k_ksyms.c +++ b/arch/m68k/kernel/m68k_ksyms.c @@ -14,7 +14,7 @@ EXPORT_SYMBOL(__ashrdi3); EXPORT_SYMBOL(__lshrdi3); EXPORT_SYMBOL(__muldi3); -#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE) +#if defined(CONFIG_CPU_HAS_NO_MULDIV64) /* * Simpler 68k and ColdFire parts also need a few other gcc functions. */ diff --git a/arch/m68k/kernel/process_mm.c b/arch/m68k/kernel/process_mm.c index 1bc223aa07ec..125f34e00bf0 100644 --- a/arch/m68k/kernel/process_mm.c +++ b/arch/m68k/kernel/process_mm.c @@ -33,22 +33,6 @@ #include <asm/setup.h> #include <asm/pgtable.h> -/* - * Initial task/thread structure. Make this a per-architecture thing, - * because different architectures tend to have different - * alignment requirements and potentially different initial - * setup. - */ -static struct signal_struct init_signals = INIT_SIGNALS(init_signals); -static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); -union thread_union init_thread_union __init_task_data - __attribute__((aligned(THREAD_SIZE))) = - { INIT_THREAD_INFO(init_task) }; - -/* initial task structure */ -struct task_struct init_task = INIT_TASK(init_task); - -EXPORT_SYMBOL(init_task); asmlinkage void ret_from_fork(void); @@ -188,9 +172,7 @@ void flush_thread(void) current->thread.fs = __USER_DS; if (!FPU_IS_EMU) - asm volatile (".chip 68k/68881\n\t" - "frestore %0@\n\t" - ".chip 68k" : : "a" (&zero)); + asm volatile ("frestore %0@" : : "a" (&zero) : "memory"); } /* @@ -264,11 +246,28 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, /* Copy the current fpu state */ asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0]) : "memory"); - if (!CPU_IS_060 ? p->thread.fpstate[0] : p->thread.fpstate[2]) - asm volatile ("fmovemx %/fp0-%/fp7,%0\n\t" - "fmoveml %/fpiar/%/fpcr/%/fpsr,%1" - : : "m" (p->thread.fp[0]), "m" (p->thread.fpcntl[0]) - : "memory"); + if (!CPU_IS_060 ? p->thread.fpstate[0] : p->thread.fpstate[2]) { + if (CPU_IS_COLDFIRE) { + asm volatile ("fmovemd %/fp0-%/fp7,%0\n\t" + "fmovel %/fpiar,%1\n\t" + "fmovel %/fpcr,%2\n\t" + "fmovel %/fpsr,%3" + : + : "m" (p->thread.fp[0]), + "m" (p->thread.fpcntl[0]), + "m" (p->thread.fpcntl[1]), + "m" (p->thread.fpcntl[2]) + : "memory"); + } else { + asm volatile ("fmovemx %/fp0-%/fp7,%0\n\t" + "fmoveml %/fpiar/%/fpcr/%/fpsr,%1" + : + : "m" (p->thread.fp[0]), + "m" (p->thread.fpcntl[0]) + : "memory"); + } + } + /* Restore the state in case the fpu was busy */ asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0])); } @@ -301,12 +300,28 @@ int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu) if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2]) return 0; - asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0" - :: "m" (fpu->fpcntl[0]) - : "memory"); - asm volatile ("fmovemx %/fp0-%/fp7,%0" - :: "m" (fpu->fpregs[0]) - : "memory"); + if (CPU_IS_COLDFIRE) { + asm volatile ("fmovel %/fpiar,%0\n\t" + "fmovel %/fpcr,%1\n\t" + "fmovel %/fpsr,%2\n\t" + "fmovemd %/fp0-%/fp7,%3" + : + : "m" (fpu->fpcntl[0]), + "m" (fpu->fpcntl[1]), + "m" (fpu->fpcntl[2]), + "m" (fpu->fpregs[0]) + : "memory"); + } else { + asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0" + : + : "m" (fpu->fpcntl[0]) + : "memory"); + asm volatile ("fmovemx %/fp0-%/fp7,%0" + : + : "m" (fpu->fpregs[0]) + : "memory"); + } + return 1; } EXPORT_SYMBOL(dump_fpu); diff --git a/arch/m68k/kernel/ptrace_mm.c b/arch/m68k/kernel/ptrace_mm.c index 0b252683cefb..7bc999b73529 100644 --- a/arch/m68k/kernel/ptrace_mm.c +++ b/arch/m68k/kernel/ptrace_mm.c @@ -18,6 +18,7 @@ #include <linux/ptrace.h> #include <linux/user.h> #include <linux/signal.h> +#include <linux/tracehook.h> #include <asm/uaccess.h> #include <asm/page.h> @@ -275,3 +276,20 @@ asmlinkage void syscall_trace(void) current->exit_code = 0; } } + +#ifdef CONFIG_COLDFIRE +asmlinkage int syscall_trace_enter(void) +{ + int ret = 0; + + if (test_thread_flag(TIF_SYSCALL_TRACE)) + ret = tracehook_report_syscall_entry(task_pt_regs(current)); + return ret; +} + +asmlinkage void syscall_trace_leave(void) +{ + if (test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(task_pt_regs(current), 0); +} +#endif /* CONFIG_COLDFIRE */ diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c index c3b45061dd08..d872ce4807c9 100644 --- a/arch/m68k/kernel/setup_mm.c +++ b/arch/m68k/kernel/setup_mm.c @@ -221,7 +221,8 @@ void __init setup_arch(char **cmdline_p) #endif /* The bootinfo is located right after the kernel bss */ - m68k_parse_bootinfo((const struct bi_record *)_end); + if (!CPU_IS_COLDFIRE) + m68k_parse_bootinfo((const struct bi_record *)_end); if (CPU_IS_040) m68k_is040or060 = 4; @@ -235,7 +236,7 @@ void __init setup_arch(char **cmdline_p) * with them, we should add a test to check_bugs() below] */ #ifndef CONFIG_M68KFPU_EMU_ONLY /* clear the fpu if we have one */ - if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060)) { + if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060|FPU_COLDFIRE)) { volatile int zero = 0; asm volatile ("frestore %0" : : "m" (zero)); } @@ -258,6 +259,10 @@ void __init setup_arch(char **cmdline_p) init_mm.end_data = (unsigned long)_edata; init_mm.brk = (unsigned long)_end; +#if defined(CONFIG_BOOTPARAM) + strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE); + m68k_command_line[CL_SIZE - 1] = 0; +#endif /* CONFIG_BOOTPARAM */ *cmdline_p = m68k_command_line; memcpy(boot_command_line, *cmdline_p, CL_SIZE); @@ -323,6 +328,11 @@ void __init setup_arch(char **cmdline_p) config_sun3x(); break; #endif +#ifdef CONFIG_COLDFIRE + case MACH_M54XX: + config_BSP(NULL, 0); + break; +#endif default: panic("No configuration setup"); } @@ -384,6 +394,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) #define LOOP_CYCLES_68030 (8) #define LOOP_CYCLES_68040 (3) #define LOOP_CYCLES_68060 (1) +#define LOOP_CYCLES_COLDFIRE (2) if (CPU_IS_020) { cpu = "68020"; @@ -397,6 +408,9 @@ static int show_cpuinfo(struct seq_file *m, void *v) } else if (CPU_IS_060) { cpu = "68060"; clockfactor = LOOP_CYCLES_68060; + } else if (CPU_IS_COLDFIRE) { + cpu = "ColdFire"; + clockfactor = LOOP_CYCLES_COLDFIRE; } else { cpu = "680x0"; clockfactor = 0; @@ -415,6 +429,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) fpu = "68060"; else if (m68k_fputype & FPU_SUNFPA) fpu = "Sun FPA"; + else if (m68k_fputype & FPU_COLDFIRE) + fpu = "ColdFire"; else fpu = "none"; #endif @@ -431,6 +447,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) mmu = "Sun-3"; else if (m68k_mmutype & MMU_APOLLO) mmu = "Apollo"; + else if (m68k_mmutype & MMU_COLDFIRE) + mmu = "ColdFire"; else mmu = "unknown"; diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c index 2ed8c0fb1517..ca3df0dc7e88 100644 --- a/arch/m68k/kernel/setup_no.c +++ b/arch/m68k/kernel/setup_no.c @@ -47,7 +47,6 @@ EXPORT_SYMBOL(memory_end); char __initdata command_line[COMMAND_LINE_SIZE]; /* machine dependent timer functions */ -void (*mach_gettod)(int*, int*, int*, int*, int*, int*); int (*mach_set_clock_mmss)(unsigned long); /* machine dependent reboot functions */ diff --git a/arch/m68k/kernel/signal_mm.c b/arch/m68k/kernel/signal_mm.c index a0afc239304e..cb856f9da655 100644 --- a/arch/m68k/kernel/signal_mm.c +++ b/arch/m68k/kernel/signal_mm.c @@ -56,7 +56,11 @@ static const int frame_extra_sizes[16] = { [1] = -1, /* sizeof(((struct frame *)0)->un.fmt1), */ [2] = sizeof(((struct frame *)0)->un.fmt2), [3] = sizeof(((struct frame *)0)->un.fmt3), +#ifdef CONFIG_COLDFIRE + [4] = 0, +#else [4] = sizeof(((struct frame *)0)->un.fmt4), +#endif [5] = -1, /* sizeof(((struct frame *)0)->un.fmt5), */ [6] = -1, /* sizeof(((struct frame *)0)->un.fmt6), */ [7] = sizeof(((struct frame *)0)->un.fmt7), @@ -84,7 +88,11 @@ int handle_kernel_fault(struct pt_regs *regs) regs->stkadj = frame_extra_sizes[regs->format]; tregs = (struct pt_regs *)((long)regs + regs->stkadj); tregs->vector = regs->vector; +#ifdef CONFIG_COLDFIRE + tregs->format = 4; +#else tregs->format = 0; +#endif tregs->pc = fixup->fixup; tregs->sr = regs->sr; @@ -195,7 +203,8 @@ static inline int restore_fpu_state(struct sigcontext *sc) if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) { /* Verify the frame format. */ - if (!CPU_IS_060 && (sc->sc_fpstate[0] != fpu_version)) + if (!(CPU_IS_060 || CPU_IS_COLDFIRE) && + (sc->sc_fpstate[0] != fpu_version)) goto out; if (CPU_IS_020_OR_030) { if (m68k_fputype & FPU_68881 && @@ -214,19 +223,43 @@ static inline int restore_fpu_state(struct sigcontext *sc) sc->sc_fpstate[3] == 0x60 || sc->sc_fpstate[3] == 0xe0)) goto out; + } else if (CPU_IS_COLDFIRE) { + if (!(sc->sc_fpstate[0] == 0x00 || + sc->sc_fpstate[0] == 0x05 || + sc->sc_fpstate[0] == 0xe5)) + goto out; } else goto out; - __asm__ volatile (".chip 68k/68881\n\t" - "fmovemx %0,%%fp0-%%fp1\n\t" - "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t" - ".chip 68k" - : /* no outputs */ - : "m" (*sc->sc_fpregs), "m" (*sc->sc_fpcntl)); + if (CPU_IS_COLDFIRE) { + __asm__ volatile ("fmovemd %0,%%fp0-%%fp1\n\t" + "fmovel %1,%%fpcr\n\t" + "fmovel %2,%%fpsr\n\t" + "fmovel %3,%%fpiar" + : /* no outputs */ + : "m" (sc->sc_fpregs[0]), + "m" (sc->sc_fpcntl[0]), + "m" (sc->sc_fpcntl[1]), + "m" (sc->sc_fpcntl[2])); + } else { + __asm__ volatile (".chip 68k/68881\n\t" + "fmovemx %0,%%fp0-%%fp1\n\t" + "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t" + ".chip 68k" + : /* no outputs */ + : "m" (*sc->sc_fpregs), + "m" (*sc->sc_fpcntl)); + } + } + + if (CPU_IS_COLDFIRE) { + __asm__ volatile ("frestore %0" : : "m" (*sc->sc_fpstate)); + } else { + __asm__ volatile (".chip 68k/68881\n\t" + "frestore %0\n\t" + ".chip 68k" + : : "m" (*sc->sc_fpstate)); } - __asm__ volatile (".chip 68k/68881\n\t" - "frestore %0\n\t" - ".chip 68k" : : "m" (*sc->sc_fpstate)); err = 0; out: @@ -241,7 +274,7 @@ out: static inline int rt_restore_fpu_state(struct ucontext __user *uc) { unsigned char fpstate[FPCONTEXT_SIZE]; - int context_size = CPU_IS_060 ? 8 : 0; + int context_size = CPU_IS_060 ? 8 : (CPU_IS_COLDFIRE ? 12 : 0); fpregset_t fpregs; int err = 1; @@ -260,10 +293,11 @@ static inline int rt_restore_fpu_state(struct ucontext __user *uc) if (__get_user(*(long *)fpstate, (long __user *)&uc->uc_fpstate)) goto out; if (CPU_IS_060 ? fpstate[2] : fpstate[0]) { - if (!CPU_IS_060) + if (!(CPU_IS_060 || CPU_IS_COLDFIRE)) context_size = fpstate[1]; /* Verify the frame format. */ - if (!CPU_IS_060 && (fpstate[0] != fpu_version)) + if (!(CPU_IS_060 || CPU_IS_COLDFIRE) && + (fpstate[0] != fpu_version)) goto out; if (CPU_IS_020_OR_030) { if (m68k_fputype & FPU_68881 && @@ -282,26 +316,50 @@ static inline int rt_restore_fpu_state(struct ucontext __user *uc) fpstate[3] == 0x60 || fpstate[3] == 0xe0)) goto out; + } else if (CPU_IS_COLDFIRE) { + if (!(fpstate[3] == 0x00 || + fpstate[3] == 0x05 || + fpstate[3] == 0xe5)) + goto out; } else goto out; if (__copy_from_user(&fpregs, &uc->uc_mcontext.fpregs, sizeof(fpregs))) goto out; - __asm__ volatile (".chip 68k/68881\n\t" - "fmovemx %0,%%fp0-%%fp7\n\t" - "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t" - ".chip 68k" - : /* no outputs */ - : "m" (*fpregs.f_fpregs), - "m" (*fpregs.f_fpcntl)); + + if (CPU_IS_COLDFIRE) { + __asm__ volatile ("fmovemd %0,%%fp0-%%fp7\n\t" + "fmovel %1,%%fpcr\n\t" + "fmovel %2,%%fpsr\n\t" + "fmovel %3,%%fpiar" + : /* no outputs */ + : "m" (fpregs.f_fpregs[0]), + "m" (fpregs.f_fpcntl[0]), + "m" (fpregs.f_fpcntl[1]), + "m" (fpregs.f_fpcntl[2])); + } else { + __asm__ volatile (".chip 68k/68881\n\t" + "fmovemx %0,%%fp0-%%fp7\n\t" + "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t" + ".chip 68k" + : /* no outputs */ + : "m" (*fpregs.f_fpregs), + "m" (*fpregs.f_fpcntl)); + } } if (context_size && __copy_from_user(fpstate + 4, (long __user *)&uc->uc_fpstate + 1, context_size)) goto out; - __asm__ volatile (".chip 68k/68881\n\t" - "frestore %0\n\t" - ".chip 68k" : : "m" (*fpstate)); + + if (CPU_IS_COLDFIRE) { + __asm__ volatile ("frestore %0" : : "m" (*fpstate)); + } else { + __asm__ volatile (".chip 68k/68881\n\t" + "frestore %0\n\t" + ".chip 68k" + : : "m" (*fpstate)); + } err = 0; out: @@ -336,8 +394,12 @@ static int mangle_kernel_stack(struct pt_regs *regs, int formatvec, regs->format = formatvec >> 12; regs->vector = formatvec & 0xfff; #define frame_offset (sizeof(struct pt_regs)+sizeof(struct switch_stack)) - __asm__ __volatile__ - (" movel %0,%/a0\n\t" + __asm__ __volatile__ ( +#ifdef CONFIG_COLDFIRE + " movel %0,%/sp\n\t" + " bra ret_from_signal\n" +#else + " movel %0,%/a0\n\t" " subl %1,%/a0\n\t" /* make room on stack */ " movel %/a0,%/sp\n\t" /* set stack pointer */ /* move switch_stack and pt_regs */ @@ -350,6 +412,7 @@ static int mangle_kernel_stack(struct pt_regs *regs, int formatvec, "2: movel %4@+,%/a0@+\n\t" " dbra %1,2b\n\t" " bral ret_from_signal\n" +#endif : /* no outputs, it doesn't ever return */ : "a" (sw), "d" (fsize), "d" (frame_offset/4-1), "n" (frame_offset), "a" (buf + fsize/4) @@ -516,10 +579,15 @@ static inline void save_fpu_state(struct sigcontext *sc, struct pt_regs *regs) return; } - __asm__ volatile (".chip 68k/68881\n\t" - "fsave %0\n\t" - ".chip 68k" - : : "m" (*sc->sc_fpstate) : "memory"); + if (CPU_IS_COLDFIRE) { + __asm__ volatile ("fsave %0" + : : "m" (*sc->sc_fpstate) : "memory"); + } else { + __asm__ volatile (".chip 68k/68881\n\t" + "fsave %0\n\t" + ".chip 68k" + : : "m" (*sc->sc_fpstate) : "memory"); + } if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) { fpu_version = sc->sc_fpstate[0]; @@ -530,21 +598,35 @@ static inline void save_fpu_state(struct sigcontext *sc, struct pt_regs *regs) if (*(unsigned short *) sc->sc_fpstate == 0x1f38) sc->sc_fpstate[0x38] |= 1 << 3; } - __asm__ volatile (".chip 68k/68881\n\t" - "fmovemx %%fp0-%%fp1,%0\n\t" - "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t" - ".chip 68k" - : "=m" (*sc->sc_fpregs), - "=m" (*sc->sc_fpcntl) - : /* no inputs */ - : "memory"); + + if (CPU_IS_COLDFIRE) { + __asm__ volatile ("fmovemd %%fp0-%%fp1,%0\n\t" + "fmovel %%fpcr,%1\n\t" + "fmovel %%fpsr,%2\n\t" + "fmovel %%fpiar,%3" + : "=m" (sc->sc_fpregs[0]), + "=m" (sc->sc_fpcntl[0]), + "=m" (sc->sc_fpcntl[1]), + "=m" (sc->sc_fpcntl[2]) + : /* no inputs */ + : "memory"); + } else { + __asm__ volatile (".chip 68k/68881\n\t" + "fmovemx %%fp0-%%fp1,%0\n\t" + "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t" + ".chip 68k" + : "=m" (*sc->sc_fpregs), + "=m" (*sc->sc_fpcntl) + : /* no inputs */ + : "memory"); + } } } static inline int rt_save_fpu_state(struct ucontext __user *uc, struct pt_regs *regs) { unsigned char fpstate[FPCONTEXT_SIZE]; - int context_size = CPU_IS_060 ? 8 : 0; + int context_size = CPU_IS_060 ? 8 : (CPU_IS_COLDFIRE ? 12 : 0); int err = 0; if (FPU_IS_EMU) { @@ -557,15 +639,19 @@ static inline int rt_save_fpu_state(struct ucontext __user *uc, struct pt_regs * return err; } - __asm__ volatile (".chip 68k/68881\n\t" - "fsave %0\n\t" - ".chip 68k" - : : "m" (*fpstate) : "memory"); + if (CPU_IS_COLDFIRE) { + __asm__ volatile ("fsave %0" : : "m" (*fpstate) : "memory"); + } else { + __asm__ volatile (".chip 68k/68881\n\t" + "fsave %0\n\t" + ".chip 68k" + : : "m" (*fpstate) : "memory"); + } err |= __put_user(*(long *)fpstate, (long __user *)&uc->uc_fpstate); if (CPU_IS_060 ? fpstate[2] : fpstate[0]) { fpregset_t fpregs; - if (!CPU_IS_060) + if (!(CPU_IS_060 || CPU_IS_COLDFIRE)) context_size = fpstate[1]; fpu_version = fpstate[0]; if (CPU_IS_020_OR_030 && @@ -575,14 +661,27 @@ static inline int rt_save_fpu_state(struct ucontext __user *uc, struct pt_regs * if (*(unsigned short *) fpstate == 0x1f38) fpstate[0x38] |= 1 << 3; } - __asm__ volatile (".chip 68k/68881\n\t" - "fmovemx %%fp0-%%fp7,%0\n\t" - "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t" - ".chip 68k" - : "=m" (*fpregs.f_fpregs), - "=m" (*fpregs.f_fpcntl) - : /* no inputs */ - : "memory"); + if (CPU_IS_COLDFIRE) { + __asm__ volatile ("fmovemd %%fp0-%%fp7,%0\n\t" + "fmovel %%fpcr,%1\n\t" + "fmovel %%fpsr,%2\n\t" + "fmovel %%fpiar,%3" + : "=m" (fpregs.f_fpregs[0]), + "=m" (fpregs.f_fpcntl[0]), + "=m" (fpregs.f_fpcntl[1]), + "=m" (fpregs.f_fpcntl[2]) + : /* no inputs */ + : "memory"); + } else { + __asm__ volatile (".chip 68k/68881\n\t" + "fmovemx %%fp0-%%fp7,%0\n\t" + "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t" + ".chip 68k" + : "=m" (*fpregs.f_fpregs), + "=m" (*fpregs.f_fpcntl) + : /* no inputs */ + : "memory"); + } err |= copy_to_user(&uc->uc_mcontext.fpregs, &fpregs, sizeof(fpregs)); } @@ -679,8 +778,7 @@ static inline void push_cache (unsigned long vaddr) "cpushl %%bc,(%0)\n\t" ".chip 68k" : : "a" (temp)); - } - else { + } else if (!CPU_IS_COLDFIRE) { /* * 68030/68020 have no writeback cache; * still need to clear icache. diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index c468f2edaa85..ce827b376110 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -365,4 +365,6 @@ ENTRY(sys_call_table) .long sys_clock_adjtime .long sys_syncfs .long sys_setns + .long sys_process_vm_readv /* 345 */ + .long sys_process_vm_writev diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c index a5cf40c26de5..75ab79b3bdeb 100644 --- a/arch/m68k/kernel/time.c +++ b/arch/m68k/kernel/time.c @@ -1,4 +1,4 @@ -#ifdef CONFIG_MMU +#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE) #include "time_mm.c" #else #include "time_no.c" diff --git a/arch/m68k/kernel/time_no.c b/arch/m68k/kernel/time_no.c index 6623909f70e6..3ef0f7768dcd 100644 --- a/arch/m68k/kernel/time_no.c +++ b/arch/m68k/kernel/time_no.c @@ -26,6 +26,9 @@ #define TICK_SIZE (tick_nsec / 1000) +/* machine dependent timer functions */ +void (*mach_gettod)(int*, int*, int*, int*, int*, int*); + static inline int set_rtc_mmss(unsigned long nowtime) { if (mach_set_clock_mmss) diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c index 89362f2bb56a..a76452ca964e 100644 --- a/arch/m68k/kernel/traps.c +++ b/arch/m68k/kernel/traps.c @@ -706,6 +706,88 @@ create_atc_entry: #endif /* CPU_M68020_OR_M68030 */ #endif /* !CONFIG_SUN3 */ +#if defined(CONFIG_COLDFIRE) && defined(CONFIG_MMU) +#include <asm/mcfmmu.h> + +/* + * The following table converts the FS encoding of a ColdFire + * exception stack frame into the error_code value needed by + * do_fault. +*/ +static const unsigned char fs_err_code[] = { + 0, /* 0000 */ + 0, /* 0001 */ + 0, /* 0010 */ + 0, /* 0011 */ + 1, /* 0100 */ + 0, /* 0101 */ + 0, /* 0110 */ + 0, /* 0111 */ + 2, /* 1000 */ + 3, /* 1001 */ + 2, /* 1010 */ + 0, /* 1011 */ + 1, /* 1100 */ + 1, /* 1101 */ + 0, /* 1110 */ + 0 /* 1111 */ +}; + +static inline void access_errorcf(unsigned int fs, struct frame *fp) +{ + unsigned long mmusr, addr; + unsigned int err_code; + int need_page_fault; + + mmusr = mmu_read(MMUSR); + addr = mmu_read(MMUAR); + + /* + * error_code: + * bit 0 == 0 means no page found, 1 means protection fault + * bit 1 == 0 means read, 1 means write + */ + switch (fs) { + case 5: /* 0101 TLB opword X miss */ + need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 0, 0); + addr = fp->ptregs.pc; + break; + case 6: /* 0110 TLB extension word X miss */ + need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 0, 1); + addr = fp->ptregs.pc + sizeof(long); + break; + case 10: /* 1010 TLB W miss */ + need_page_fault = cf_tlb_miss(&fp->ptregs, 1, 1, 0); + break; + case 14: /* 1110 TLB R miss */ + need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 1, 0); + break; + default: + /* 0000 Normal */ + /* 0001 Reserved */ + /* 0010 Interrupt during debug service routine */ + /* 0011 Reserved */ + /* 0100 X Protection */ + /* 0111 IFP in emulator mode */ + /* 1000 W Protection*/ + /* 1001 Write error*/ + /* 1011 Reserved*/ + /* 1100 R Protection*/ + /* 1101 R Protection*/ + /* 1111 OEP in emulator mode*/ + need_page_fault = 1; + break; + } + + if (need_page_fault) { + err_code = fs_err_code[fs]; + if ((fs == 13) && (mmusr & MMUSR_WF)) /* rd-mod-wr access */ + err_code |= 2; /* bit1 - write, bit0 - protection */ + do_page_fault(&fp->ptregs, addr, err_code); + } +} +#endif /* CONFIG_COLDFIRE CONFIG_MMU */ + asmlinkage void buserr_c(struct frame *fp) { /* Only set esp0 if coming from user mode */ @@ -716,6 +798,28 @@ asmlinkage void buserr_c(struct frame *fp) printk ("*** Bus Error *** Format is %x\n", fp->ptregs.format); #endif +#if defined(CONFIG_COLDFIRE) && defined(CONFIG_MMU) + if (CPU_IS_COLDFIRE) { + unsigned int fs; + fs = (fp->ptregs.vector & 0x3) | + ((fp->ptregs.vector & 0xc00) >> 8); + switch (fs) { + case 0x5: + case 0x6: + case 0x7: + case 0x9: + case 0xa: + case 0xd: + case 0xe: + case 0xf: + access_errorcf(fs, fp); + return; + default: + break; + } + } +#endif /* CONFIG_COLDFIRE && CONFIG_MMU */ + switch (fp->ptregs.format) { #if defined (CONFIG_M68060) case 4: /* 68060 access error */ diff --git a/arch/m68k/kernel/vmlinux.lds_no.S b/arch/m68k/kernel/vmlinux-nommu.lds index 4e2389340837..8e66ccb0935e 100644 --- a/arch/m68k/kernel/vmlinux.lds_no.S +++ b/arch/m68k/kernel/vmlinux-nommu.lds @@ -69,6 +69,7 @@ SECTIONS { SCHED_TEXT LOCK_TEXT *(.text..lock) + *(.fixup) . = ALIGN(16); /* Exception table */ __start___ex_table = .; @@ -161,6 +162,13 @@ SECTIONS { _edata = . ; } > DATA + .m68k_fixup : { + __start_fixup = .; + *(.m68k_fixup) + __stop_fixup = .; + } > DATA + NOTES > DATA + .init.text : { . = ALIGN(PAGE_SIZE); __init_begin = .; diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds index d0993594f558..63407c836826 100644 --- a/arch/m68k/kernel/vmlinux-std.lds +++ b/arch/m68k/kernel/vmlinux-std.lds @@ -31,7 +31,9 @@ SECTIONS RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE) + _sbss = .; BSS_SECTION(0, 0, 0) + _ebss = .; _edata = .; /* End of data section */ diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds index 8080469ee6c1..ad0f46d64c0b 100644 --- a/arch/m68k/kernel/vmlinux-sun3.lds +++ b/arch/m68k/kernel/vmlinux-sun3.lds @@ -44,7 +44,9 @@ __init_begin = .; . = ALIGN(PAGE_SIZE); __init_end = .; + _sbss = .; BSS_SECTION(0, 0, 0) + _ebss = .; _end = . ; diff --git a/arch/m68k/kernel/vmlinux.lds.S b/arch/m68k/kernel/vmlinux.lds.S index 030dabf0bc53..69ec79638870 100644 --- a/arch/m68k/kernel/vmlinux.lds.S +++ b/arch/m68k/kernel/vmlinux.lds.S @@ -1,5 +1,14 @@ -#ifdef CONFIG_MMU -#include "vmlinux.lds_mm.S" +#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE) +PHDRS +{ + text PT_LOAD FILEHDR PHDRS FLAGS (7); + data PT_LOAD FLAGS (7); +} +#ifdef CONFIG_SUN3 +#include "vmlinux-sun3.lds" #else -#include "vmlinux.lds_no.S" +#include "vmlinux-std.lds" +#endif +#else +#include "vmlinux-nommu.lds" #endif diff --git a/arch/m68k/kernel/vmlinux.lds_mm.S b/arch/m68k/kernel/vmlinux.lds_mm.S deleted file mode 100644 index 99ba315bd0a8..000000000000 --- a/arch/m68k/kernel/vmlinux.lds_mm.S +++ /dev/null @@ -1,10 +0,0 @@ -PHDRS -{ - text PT_LOAD FILEHDR PHDRS FLAGS (7); - data PT_LOAD FLAGS (7); -} -#ifdef CONFIG_SUN3 -#include "vmlinux-sun3.lds" -#else -#include "vmlinux-std.lds" -#endif diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile index 1a1bd9067e90..a9d782d34276 100644 --- a/arch/m68k/lib/Makefile +++ b/arch/m68k/lib/Makefile @@ -6,9 +6,11 @@ lib-y := ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ memcpy.o memset.o memmove.o -ifdef CONFIG_MMU -lib-y += string.o uaccess.o checksum_mm.o -else -lib-y += mulsi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o checksum_no.o +lib-$(CONFIG_MMU) += string.o uaccess.o +lib-$(CONFIG_CPU_HAS_NO_MULDIV64) += mulsi3.o divsi3.o udivsi3.o +lib-$(CONFIG_CPU_HAS_NO_MULDIV64) += modsi3.o umodsi3.o + +ifndef CONFIG_GENERIC_CSUM +lib-y += checksum.o endif diff --git a/arch/m68k/lib/checksum_mm.c b/arch/m68k/lib/checksum.c index 6216f12a756b..6216f12a756b 100644 --- a/arch/m68k/lib/checksum_mm.c +++ b/arch/m68k/lib/checksum.c diff --git a/arch/m68k/lib/checksum_no.c b/arch/m68k/lib/checksum_no.c deleted file mode 100644 index e4c6354da765..000000000000 --- a/arch/m68k/lib/checksum_no.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * INET An implementation of the TCP/IP protocol suite for the LINUX - * operating system. INET is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * IP/TCP/UDP checksumming routines - * - * Authors: Jorge Cwik, <jorge@laser.satlink.net> - * Arnt Gulbrandsen, <agulbra@nvg.unit.no> - * Tom May, <ftom@netcom.com> - * Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de> - * Lots of code moved from tcp.c and ip.c; see those files - * for more names. - * - * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek: - * Fixed some nasty bugs, causing some horrible crashes. - * A: At some points, the sum (%0) was used as - * length-counter instead of the length counter - * (%1). Thanks to Roman Hodek for pointing this out. - * B: GCC seems to mess up if one uses too many - * data-registers to hold input values and one tries to - * specify d0 and d1 as scratch registers. Letting gcc choose these - * registers itself solves the problem. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access kills, so most - of the assembly has to go. */ - -#include <linux/module.h> -#include <net/checksum.h> - -static inline unsigned short from32to16(unsigned long x) -{ - /* add up 16-bit and 16-bit for 16+c bit */ - x = (x & 0xffff) + (x >> 16); - /* add up carry.. */ - x = (x & 0xffff) + (x >> 16); - return x; -} - -static unsigned long do_csum(const unsigned char * buff, int len) -{ - int odd, count; - unsigned long result = 0; - - if (len <= 0) - goto out; - odd = 1 & (unsigned long) buff; - if (odd) { - result = *buff; - len--; - buff++; - } - count = len >> 1; /* nr of 16-bit words.. */ - if (count) { - if (2 & (unsigned long) buff) { - result += *(unsigned short *) buff; - count--; - len -= 2; - buff += 2; - } - count >>= 1; /* nr of 32-bit words.. */ - if (count) { - unsigned long carry = 0; - do { - unsigned long w = *(unsigned long *) buff; - count--; - buff += 4; - result += carry; - result += w; - carry = (w > result); - } while (count); - result += carry; - result = (result & 0xffff) + (result >> 16); - } - if (len & 2) { - result += *(unsigned short *) buff; - buff += 2; - } - } - if (len & 1) - result += (*buff << 8); - result = from32to16(result); - if (odd) - result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); -out: - return result; -} - -#ifdef CONFIG_COLDFIRE -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - */ -__sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - return (__force __sum16)~do_csum(iph,ihl*4); -} -EXPORT_SYMBOL(ip_fast_csum); -#endif - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum) -{ - unsigned int result = do_csum(buff, len); - - /* add in old sum, and carry.. */ - result += (__force u32)sum; - if ((__force u32)sum > result) - result += 1; - return (__force __wsum)result; -} - -EXPORT_SYMBOL(csum_partial); - -/* - * copy from fs while checksumming, otherwise like csum_partial - */ - -__wsum -csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *csum_err) -{ - if (csum_err) *csum_err = 0; - memcpy(dst, (__force const void *)src, len); - return csum_partial(dst, len, sum); -} -EXPORT_SYMBOL(csum_partial_copy_from_user); - -/* - * copy from ds while checksumming, otherwise like csum_partial - */ - -__wsum -csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum) -{ - memcpy(dst, src, len); - return csum_partial(dst, len, sum); -} -EXPORT_SYMBOL(csum_partial_copy_nocheck); diff --git a/arch/m68k/lib/uaccess.c b/arch/m68k/lib/uaccess.c index 13854ed8cd9a..5664386338da 100644 --- a/arch/m68k/lib/uaccess.c +++ b/arch/m68k/lib/uaccess.c @@ -15,17 +15,17 @@ unsigned long __generic_copy_from_user(void *to, const void __user *from, asm volatile ("\n" " tst.l %0\n" " jeq 2f\n" - "1: moves.l (%1)+,%3\n" + "1: "MOVES".l (%1)+,%3\n" " move.l %3,(%2)+\n" " subq.l #1,%0\n" " jne 1b\n" "2: btst #1,%5\n" " jeq 4f\n" - "3: moves.w (%1)+,%3\n" + "3: "MOVES".w (%1)+,%3\n" " move.w %3,(%2)+\n" "4: btst #0,%5\n" " jeq 6f\n" - "5: moves.b (%1)+,%3\n" + "5: "MOVES".b (%1)+,%3\n" " move.b %3,(%2)+\n" "6:\n" " .section .fixup,\"ax\"\n" @@ -68,17 +68,17 @@ unsigned long __generic_copy_to_user(void __user *to, const void *from, " tst.l %0\n" " jeq 4f\n" "1: move.l (%1)+,%3\n" - "2: moves.l %3,(%2)+\n" + "2: "MOVES".l %3,(%2)+\n" "3: subq.l #1,%0\n" " jne 1b\n" "4: btst #1,%5\n" " jeq 6f\n" " move.w (%1)+,%3\n" - "5: moves.w %3,(%2)+\n" + "5: "MOVES".w %3,(%2)+\n" "6: btst #0,%5\n" " jeq 8f\n" " move.b (%1)+,%3\n" - "7: moves.b %3,(%2)+\n" + "7: "MOVES".b %3,(%2)+\n" "8:\n" " .section .fixup,\"ax\"\n" " .even\n" @@ -115,7 +115,7 @@ long strncpy_from_user(char *dst, const char __user *src, long count) return count; asm volatile ("\n" - "1: moves.b (%2)+,%4\n" + "1: "MOVES".b (%2)+,%4\n" " move.b %4,(%1)+\n" " jeq 2f\n" " subq.l #1,%3\n" @@ -152,7 +152,7 @@ long strnlen_user(const char __user *src, long n) asm volatile ("\n" "1: subq.l #1,%1\n" " jmi 3f\n" - "2: moves.b (%0)+,%2\n" + "2: "MOVES".b (%0)+,%2\n" " tst.b %2\n" " jne 1b\n" " jra 4f\n" @@ -188,15 +188,15 @@ unsigned long __clear_user(void __user *to, unsigned long n) asm volatile ("\n" " tst.l %0\n" " jeq 3f\n" - "1: moves.l %2,(%1)+\n" + "1: "MOVES".l %2,(%1)+\n" "2: subq.l #1,%0\n" " jne 1b\n" "3: btst #1,%4\n" " jeq 5f\n" - "4: moves.w %2,(%1)+\n" + "4: "MOVES".w %2,(%1)+\n" "5: btst #0,%4\n" " jeq 7f\n" - "6: moves.b %2,(%1)\n" + "6: "MOVES".b %2,(%1)\n" "7:\n" " .section .fixup,\"ax\"\n" " .even\n" diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c index b403924a1cad..3fe0e43d44f6 100644 --- a/arch/m68k/mac/baboon.c +++ b/arch/m68k/mac/baboon.c @@ -8,13 +8,8 @@ #include <linux/types.h> #include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/init.h> #include <linux/irq.h> -#include <asm/traps.h> -#include <asm/bootinfo.h> #include <asm/macintosh.h> #include <asm/macints.h> #include <asm/mac_baboon.h> @@ -23,7 +18,6 @@ int baboon_present; static volatile struct baboon *baboon; -static unsigned char baboon_disabled; #if 0 extern int macide_ack_intr(struct ata_channel *); @@ -89,51 +83,32 @@ static void baboon_irq(unsigned int irq, struct irq_desc *desc) void __init baboon_register_interrupts(void) { - baboon_disabled = 0; irq_set_chained_handler(IRQ_NUBUS_C, baboon_irq); } /* - * The means for masking individual baboon interrupts remains a mystery, so - * enable the umbrella interrupt only when no baboon interrupt is disabled. + * The means for masking individual Baboon interrupts remains a mystery. + * However, since we only use the IDE IRQ, we can just enable/disable all + * Baboon interrupts. If/when we handle more than one Baboon IRQ, we must + * either figure out how to mask them individually or else implement the + * same workaround that's used for NuBus slots (see nubus_disabled and + * via_nubus_irq_shutdown). */ void baboon_irq_enable(int irq) { - int irq_idx = IRQ_IDX(irq); - #ifdef DEBUG_IRQUSE printk("baboon_irq_enable(%d)\n", irq); #endif - baboon_disabled &= ~(1 << irq_idx); - if (!baboon_disabled) - mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C)); + mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C)); } void baboon_irq_disable(int irq) { - int irq_idx = IRQ_IDX(irq); - #ifdef DEBUG_IRQUSE printk("baboon_irq_disable(%d)\n", irq); #endif - baboon_disabled |= 1 << irq_idx; - if (baboon_disabled) - mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C)); -} - -void baboon_irq_clear(int irq) -{ - int irq_idx = IRQ_IDX(irq); - - baboon->mb_ifr &= ~(1 << irq_idx); -} - -int baboon_irq_pending(int irq) -{ - int irq_idx = IRQ_IDX(irq); - - return baboon->mb_ifr & (1 << irq_idx); + mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C)); } diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c index c247de02bc7e..f60ff5f59205 100644 --- a/arch/m68k/mac/config.c +++ b/arch/m68k/mac/config.c @@ -71,6 +71,31 @@ static void mac_get_model(char *str); static void mac_identify(void); static void mac_report_hardware(void); +#ifdef CONFIG_EARLY_PRINTK +asmlinkage void __init mac_early_print(const char *s, unsigned n); + +static void __init mac_early_cons_write(struct console *con, + const char *s, unsigned n) +{ + mac_early_print(s, n); +} + +static struct console __initdata mac_early_cons = { + .name = "early", + .write = mac_early_cons_write, + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1 +}; + +int __init mac_unregister_early_cons(void) +{ + /* mac_early_print can't be used after init sections are discarded */ + return unregister_console(&mac_early_cons); +} + +late_initcall(mac_unregister_early_cons); +#endif + static void __init mac_sched_init(irq_handler_t vector) { via_init_clock(vector); @@ -164,6 +189,10 @@ void __init config_mac(void) mach_beep = mac_mksound; #endif +#ifdef CONFIG_EARLY_PRINTK + register_console(&mac_early_cons); +#endif + /* * Determine hardware present */ @@ -192,7 +221,7 @@ void __init config_mac(void) * inaccurate, so look here if a new Mac model won't run. Example: if * a Mac crashes immediately after the VIA1 registers have been dumped * to the screen, it probably died attempting to read DirB on a RBV. - * Meaning it should have MAC_VIA_IIci here :-) + * Meaning it should have MAC_VIA_IICI here :-) */ struct mac_model *macintosh_config; @@ -267,7 +296,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_IICI, .name = "IIci", .adb_type = MAC_ADB_II, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -276,7 +305,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_IIFX, .name = "IIfx", .adb_type = MAC_ADB_IOP, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_IOP, .nubus_type = MAC_NUBUS, @@ -285,7 +314,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_IISI, .name = "IIsi", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -294,7 +323,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_IIVI, .name = "IIvi", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -303,7 +332,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_IIVX, .name = "IIvx", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -318,7 +347,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_CLII, .name = "Classic II", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -327,7 +356,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_CCL, .name = "Color Classic", .adb_type = MAC_ADB_CUDA, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -336,7 +365,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_CCLII, .name = "Color Classic II", .adb_type = MAC_ADB_CUDA, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -351,7 +380,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_LC, .name = "LC", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -360,7 +389,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_LCII, .name = "LC II", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -369,7 +398,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_LCIII, .name = "LC III", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -497,7 +526,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_P460, .name = "Performa 460", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -524,7 +553,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_P520, .name = "Performa 520", .adb_type = MAC_ADB_CUDA, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -533,7 +562,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_P550, .name = "Performa 550", .adb_type = MAC_ADB_CUDA, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -565,7 +594,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_TV, .name = "TV", .adb_type = MAC_ADB_CUDA, - .via_type = MAC_VIA_QUADRA, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -574,7 +603,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_P600, .name = "Performa 600", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -645,8 +674,8 @@ static struct mac_model mac_data_table[] = { }, { .ident = MAC_MODEL_PB150, .name = "PowerBook 150", - .adb_type = MAC_ADB_PB1, - .via_type = MAC_VIA_IIci, + .adb_type = MAC_ADB_PB2, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .ide_type = MAC_IDE_PB, .scc_type = MAC_SCC_QUADRA, @@ -732,17 +761,13 @@ static struct mac_model mac_data_table[] = { * PowerBook Duos are pretty much like normal PowerBooks * All of these probably have onboard SONIC in the Dock which * means we'll have to probe for it eventually. - * - * Are these really MAC_VIA_IIci? The developer notes for the - * Duos show pretty much the same custom parts as in most of - * the other PowerBooks which would imply MAC_VIA_QUADRA. */ { .ident = MAC_MODEL_PB210, .name = "PowerBook Duo 210", .adb_type = MAC_ADB_PB2, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_QUADRA, .nubus_type = MAC_NUBUS, @@ -751,7 +776,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_PB230, .name = "PowerBook Duo 230", .adb_type = MAC_ADB_PB2, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_QUADRA, .nubus_type = MAC_NUBUS, @@ -760,7 +785,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_PB250, .name = "PowerBook Duo 250", .adb_type = MAC_ADB_PB2, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_QUADRA, .nubus_type = MAC_NUBUS, @@ -769,7 +794,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_PB270C, .name = "PowerBook Duo 270c", .adb_type = MAC_ADB_PB2, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_QUADRA, .nubus_type = MAC_NUBUS, @@ -778,7 +803,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_PB280, .name = "PowerBook Duo 280", .adb_type = MAC_ADB_PB2, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_QUADRA, .nubus_type = MAC_NUBUS, @@ -787,7 +812,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_PB280C, .name = "PowerBook Duo 280c", .adb_type = MAC_ADB_PB2, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_QUADRA, .nubus_type = MAC_NUBUS, @@ -864,8 +889,14 @@ static void __init mac_identify(void) scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC_B; break; default: - scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_MAC_SCC; - scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC; + /* On non-PSC machines, the serial ports share an IRQ. */ + if (macintosh_config->ident == MAC_MODEL_IIFX) { + scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_MAC_SCC; + scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC; + } else { + scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_AUTO_4; + scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_AUTO_4; + } break; } diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c index a5462cc0bfd6..7d8d46127ad9 100644 --- a/arch/m68k/mac/iop.c +++ b/arch/m68k/mac/iop.c @@ -115,7 +115,6 @@ #include <asm/macintosh.h> #include <asm/macints.h> #include <asm/mac_iop.h> -#include <asm/mac_oss.h> /*#define DEBUG_IOP*/ @@ -149,8 +148,6 @@ static struct listener iop_listeners[NUM_IOPS][NUM_IOP_CHAN]; irqreturn_t iop_ism_irq(int, void *); -extern void oss_irq_enable(int); - /* * Private access functions */ @@ -304,11 +301,10 @@ void __init iop_init(void) void __init iop_register_interrupts(void) { if (iop_ism_present) { - if (oss_present) { - if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq, 0, + if (macintosh_config->ident == MAC_MODEL_IIFX) { + if (request_irq(IRQ_MAC_ADB, iop_ism_irq, 0, "ISM IOP", (void *)IOP_NUM_ISM)) pr_err("Couldn't register ISM IOP interrupt\n"); - oss_irq_enable(IRQ_MAC_ADB); } else { if (request_irq(IRQ_VIA2_0, iop_ism_irq, 0, "ISM IOP", (void *)IOP_NUM_ISM)) diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c index ba220b70ab8c..5c1a6b2ff0af 100644 --- a/arch/m68k/mac/macints.c +++ b/arch/m68k/mac/macints.c @@ -26,10 +26,6 @@ * - slot 6: timer 1 (not on IIci) * - slot 7: status of IRQ; signals 'any enabled int.' * - * 2 - OSS (IIfx only?) - * - slot 0: SCSI interrupt - * - slot 1: Sound interrupt - * * Levels 3-6 vary by machine type. For VIA or RBV Macintoshes: * * 3 - unused (?) @@ -42,21 +38,30 @@ * * 6 - off switch (?) * - * For OSS Macintoshes (IIfx only at this point): + * Machines with Quadra-like VIA hardware, except PSC and PMU machines, support + * an alternate interrupt mapping, as used by A/UX. It spreads ethernet and + * sound out to their own autovector IRQs and gives VIA1 a higher priority: * - * 3 - Nubus interrupt - * - slot 0: Slot $9 - * - slot 1: Slot $A - * - slot 2: Slot $B - * - slot 3: Slot $C - * - slot 4: Slot $D - * - slot 5: Slot $E + * 1 - unused (?) * - * 4 - SCC IOP + * 3 - on-board SONIC + * + * 5 - Apple Sound Chip (ASC) + * + * 6 - VIA1 + * + * For OSS Macintoshes (IIfx only), we apply an interrupt mapping similar to + * the Quadra (A/UX) mapping: + * + * 1 - ISM IOP (ADB) * - * 5 - ISM IOP (ADB?) + * 2 - SCSI * - * 6 - unused + * 3 - NuBus + * + * 4 - SCC IOP + * + * 6 - VIA1 * * For PSC Macintoshes (660AV, 840AV): * @@ -100,88 +105,29 @@ * case. They're hidden behind the Nubus slot $C interrupt thus adding a * third layer of indirection. Why oh why did the Apple engineers do that? * - * - We support "fast" and "slow" handlers, just like the Amiga port. The - * fast handlers are called first and with all interrupts disabled. They - * are expected to execute quickly (hence the name). The slow handlers are - * called last with interrupts enabled and the interrupt level restored. - * They must therefore be reentrant. - * - * TODO: - * */ -#include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> #include <linux/sched.h> -#include <linux/kernel_stat.h> -#include <linux/interrupt.h> /* for intr_count */ +#include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/delay.h> -#include <linux/seq_file.h> -#include <asm/system.h> #include <asm/irq.h> -#include <asm/traps.h> -#include <asm/bootinfo.h> #include <asm/macintosh.h> +#include <asm/macints.h> #include <asm/mac_via.h> #include <asm/mac_psc.h> +#include <asm/mac_oss.h> +#include <asm/mac_iop.h> +#include <asm/mac_baboon.h> #include <asm/hwtest.h> -#include <asm/errno.h> -#include <asm/macints.h> #include <asm/irq_regs.h> -#include <asm/mac_oss.h> #define SHUTUP_SONIC /* - * VIA/RBV hooks - */ - -extern void via_register_interrupts(void); -extern void via_irq_enable(int); -extern void via_irq_disable(int); -extern void via_irq_clear(int); -extern int via_irq_pending(int); - -/* - * OSS hooks - */ - -extern void oss_register_interrupts(void); -extern void oss_irq_enable(int); -extern void oss_irq_disable(int); -extern void oss_irq_clear(int); -extern int oss_irq_pending(int); - -/* - * PSC hooks - */ - -extern void psc_register_interrupts(void); -extern void psc_irq_enable(int); -extern void psc_irq_disable(int); -extern void psc_irq_clear(int); -extern int psc_irq_pending(int); - -/* - * IOP hooks - */ - -extern void iop_register_interrupts(void); - -/* - * Baboon hooks - */ - -extern int baboon_present; - -extern void baboon_register_interrupts(void); -extern void baboon_irq_enable(int); -extern void baboon_irq_disable(int); -extern void baboon_irq_clear(int); - -/* * console_loglevel determines NMI handler function */ @@ -190,10 +136,15 @@ irqreturn_t mac_debug_handler(int, void *); /* #define DEBUG_MACINTS */ +static unsigned int mac_irq_startup(struct irq_data *); +static void mac_irq_shutdown(struct irq_data *); + static struct irq_chip mac_irq_chip = { .name = "mac", .irq_enable = mac_irq_enable, .irq_disable = mac_irq_disable, + .irq_startup = mac_irq_startup, + .irq_shutdown = mac_irq_shutdown, }; void __init mac_init_IRQ(void) @@ -239,8 +190,6 @@ void __init mac_init_IRQ(void) /* * mac_irq_enable - enable an interrupt source * mac_irq_disable - disable an interrupt source - * mac_clear_irq - clears a pending interrupt - * mac_irq_pending - returns the pending status of an IRQ (nonzero = pending) * * These routines are just dispatchers to the VIA/OSS/PSC routines. */ @@ -252,8 +201,6 @@ void mac_irq_enable(struct irq_data *data) switch(irq_src) { case 1: - via_irq_enable(irq); - break; case 2: case 7: if (oss_present) @@ -262,6 +209,7 @@ void mac_irq_enable(struct irq_data *data) via_irq_enable(irq); break; case 3: + case 4: case 5: case 6: if (psc_present) @@ -269,10 +217,6 @@ void mac_irq_enable(struct irq_data *data) else if (oss_present) oss_irq_enable(irq); break; - case 4: - if (psc_present) - psc_irq_enable(irq); - break; case 8: if (baboon_present) baboon_irq_enable(irq); @@ -287,8 +231,6 @@ void mac_irq_disable(struct irq_data *data) switch(irq_src) { case 1: - via_irq_disable(irq); - break; case 2: case 7: if (oss_present) @@ -297,6 +239,7 @@ void mac_irq_disable(struct irq_data *data) via_irq_disable(irq); break; case 3: + case 4: case 5: case 6: if (psc_present) @@ -304,10 +247,6 @@ void mac_irq_disable(struct irq_data *data) else if (oss_present) oss_irq_disable(irq); break; - case 4: - if (psc_present) - psc_irq_disable(irq); - break; case 8: if (baboon_present) baboon_irq_disable(irq); @@ -315,65 +254,27 @@ void mac_irq_disable(struct irq_data *data) } } -void mac_clear_irq(unsigned int irq) +static unsigned int mac_irq_startup(struct irq_data *data) { - switch(IRQ_SRC(irq)) { - case 1: - via_irq_clear(irq); - break; - case 2: - case 7: - if (oss_present) - oss_irq_clear(irq); - else - via_irq_clear(irq); - break; - case 3: - case 5: - case 6: - if (psc_present) - psc_irq_clear(irq); - else if (oss_present) - oss_irq_clear(irq); - break; - case 4: - if (psc_present) - psc_irq_clear(irq); - break; - case 8: - if (baboon_present) - baboon_irq_clear(irq); - break; - } + int irq = data->irq; + + if (IRQ_SRC(irq) == 7 && !oss_present) + via_nubus_irq_startup(irq); + else + mac_irq_enable(data); + + return 0; } -int mac_irq_pending(unsigned int irq) +static void mac_irq_shutdown(struct irq_data *data) { - switch(IRQ_SRC(irq)) { - case 1: - return via_irq_pending(irq); - case 2: - case 7: - if (oss_present) - return oss_irq_pending(irq); - else - return via_irq_pending(irq); - case 3: - case 5: - case 6: - if (psc_present) - return psc_irq_pending(irq); - else if (oss_present) - return oss_irq_pending(irq); - break; - case 4: - if (psc_present) - return psc_irq_pending(irq); - break; - } - return 0; + int irq = data->irq; + + if (IRQ_SRC(irq) == 7 && !oss_present) + via_nubus_irq_shutdown(irq); + else + mac_irq_disable(data); } -EXPORT_SYMBOL(mac_irq_pending); static int num_debug[8]; diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index a4c82dab9ff1..6c4c882c126e 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -1,5 +1,5 @@ /* - * OSS handling + * Operating System Services (OSS) chip handling * Written by Joshua M. Thompson (funaho@jurai.org) * * @@ -30,8 +30,6 @@ int oss_present; volatile struct mac_oss *oss; -extern void via1_irq(unsigned int irq, struct irq_desc *desc); - /* * Initialize the OSS * @@ -51,10 +49,8 @@ void __init oss_init(void) /* do this by setting the source's interrupt level to zero. */ for (i = 0; i <= OSS_NUM_SOURCES; i++) { - oss->irq_level[i] = OSS_IRQLEV_DISABLED; + oss->irq_level[i] = 0; } - /* If we disable VIA1 here, we never really handle it... */ - oss->irq_level[OSS_VIA1] = OSS_IRQLEV_VIA1; } /* @@ -66,17 +62,13 @@ void __init oss_nubus_init(void) } /* - * Handle miscellaneous OSS interrupts. Right now that's just sound - * and SCSI; everything else is routed to its own autovector IRQ. + * Handle miscellaneous OSS interrupts. */ static void oss_irq(unsigned int irq, struct irq_desc *desc) { - int events; - - events = oss->irq_pending & (OSS_IP_SOUND|OSS_IP_SCSI); - if (!events) - return; + int events = oss->irq_pending & + (OSS_IP_IOPSCC | OSS_IP_SCSI | OSS_IP_IOPISM); #ifdef DEBUG_IRQS if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) { @@ -84,16 +76,20 @@ static void oss_irq(unsigned int irq, struct irq_desc *desc) (int) oss->irq_pending); } #endif - /* FIXME: how do you clear a pending IRQ? */ - if (events & OSS_IP_SOUND) { - oss->irq_pending &= ~OSS_IP_SOUND; - /* FIXME: call sound handler */ - } else if (events & OSS_IP_SCSI) { + if (events & OSS_IP_IOPSCC) { + oss->irq_pending &= ~OSS_IP_IOPSCC; + generic_handle_irq(IRQ_MAC_SCC); + } + + if (events & OSS_IP_SCSI) { oss->irq_pending &= ~OSS_IP_SCSI; generic_handle_irq(IRQ_MAC_SCSI); - } else { - /* FIXME: error check here? */ + } + + if (events & OSS_IP_IOPISM) { + oss->irq_pending &= ~OSS_IP_IOPISM; + generic_handle_irq(IRQ_MAC_ADB); } } @@ -132,14 +128,29 @@ static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc) /* * Register the OSS and NuBus interrupt dispatchers. + * + * This IRQ mapping is laid out with two things in mind: first, we try to keep + * things on their own levels to avoid having to do double-dispatches. Second, + * the levels match as closely as possible the alternate IRQ mapping mode (aka + * "A/UX mode") available on some VIA machines. */ +#define OSS_IRQLEV_IOPISM IRQ_AUTO_1 +#define OSS_IRQLEV_SCSI IRQ_AUTO_2 +#define OSS_IRQLEV_NUBUS IRQ_AUTO_3 +#define OSS_IRQLEV_IOPSCC IRQ_AUTO_4 +#define OSS_IRQLEV_VIA1 IRQ_AUTO_6 + void __init oss_register_interrupts(void) { - irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq); - irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq); - irq_set_chained_handler(OSS_IRQLEV_SOUND, oss_irq); - irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq); + irq_set_chained_handler(OSS_IRQLEV_IOPISM, oss_irq); + irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq); + irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq); + irq_set_chained_handler(OSS_IRQLEV_IOPSCC, oss_irq); + irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq); + + /* OSS_VIA1 gets enabled here because it has no machspec interrupt. */ + oss->irq_level[OSS_VIA1] = IRQ_AUTO_6; } /* @@ -158,13 +169,13 @@ void oss_irq_enable(int irq) { switch(irq) { case IRQ_MAC_SCC: oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_IOPSCC; - break; + return; case IRQ_MAC_ADB: oss->irq_level[OSS_IOPISM] = OSS_IRQLEV_IOPISM; - break; + return; case IRQ_MAC_SCSI: oss->irq_level[OSS_SCSI] = OSS_IRQLEV_SCSI; - break; + return; case IRQ_NUBUS_9: case IRQ_NUBUS_A: case IRQ_NUBUS_B: @@ -173,13 +184,11 @@ void oss_irq_enable(int irq) { case IRQ_NUBUS_E: irq -= NUBUS_SOURCE_BASE; oss->irq_level[irq] = OSS_IRQLEV_NUBUS; - break; -#ifdef DEBUG_IRQUSE - default: - printk("%s unknown irq %d\n", __func__, irq); - break; -#endif + return; } + + if (IRQ_SRC(irq) == 1) + via_irq_enable(irq); } /* @@ -195,50 +204,14 @@ void oss_irq_disable(int irq) { #endif switch(irq) { case IRQ_MAC_SCC: - oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_DISABLED; - break; - case IRQ_MAC_ADB: - oss->irq_level[OSS_IOPISM] = OSS_IRQLEV_DISABLED; - break; - case IRQ_MAC_SCSI: - oss->irq_level[OSS_SCSI] = OSS_IRQLEV_DISABLED; - break; - case IRQ_NUBUS_9: - case IRQ_NUBUS_A: - case IRQ_NUBUS_B: - case IRQ_NUBUS_C: - case IRQ_NUBUS_D: - case IRQ_NUBUS_E: - irq -= NUBUS_SOURCE_BASE; - oss->irq_level[irq] = OSS_IRQLEV_DISABLED; - break; -#ifdef DEBUG_IRQUSE - default: - printk("%s unknown irq %d\n", __func__, irq); - break; -#endif - } -} - -/* - * Clear an OSS interrupt - * - * Not sure if this works or not but it's the only method I could - * think of based on the contents of the mac_oss structure. - */ - -void oss_irq_clear(int irq) { - /* FIXME: how to do this on OSS? */ - switch(irq) { - case IRQ_MAC_SCC: - oss->irq_pending &= ~OSS_IP_IOPSCC; - break; + oss->irq_level[OSS_IOPSCC] = 0; + return; case IRQ_MAC_ADB: - oss->irq_pending &= ~OSS_IP_IOPISM; - break; + oss->irq_level[OSS_IOPISM] = 0; + return; case IRQ_MAC_SCSI: - oss->irq_pending &= ~OSS_IP_SCSI; - break; + oss->irq_level[OSS_SCSI] = 0; + return; case IRQ_NUBUS_9: case IRQ_NUBUS_A: case IRQ_NUBUS_B: @@ -246,36 +219,10 @@ void oss_irq_clear(int irq) { case IRQ_NUBUS_D: case IRQ_NUBUS_E: irq -= NUBUS_SOURCE_BASE; - oss->irq_pending &= ~(1 << irq); - break; + oss->irq_level[irq] = 0; + return; } -} - -/* - * Check to see if a specific OSS interrupt is pending - */ -int oss_irq_pending(int irq) -{ - switch(irq) { - case IRQ_MAC_SCC: - return oss->irq_pending & OSS_IP_IOPSCC; - break; - case IRQ_MAC_ADB: - return oss->irq_pending & OSS_IP_IOPISM; - break; - case IRQ_MAC_SCSI: - return oss->irq_pending & OSS_IP_SCSI; - break; - case IRQ_NUBUS_9: - case IRQ_NUBUS_A: - case IRQ_NUBUS_B: - case IRQ_NUBUS_C: - case IRQ_NUBUS_D: - case IRQ_NUBUS_E: - irq -= NUBUS_SOURCE_BASE; - return oss->irq_pending & (1 << irq); - break; - } - return 0; + if (IRQ_SRC(irq) == 1) + via_irq_disable(irq); } diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c index e6c2d20f328d..6f026fc302fa 100644 --- a/arch/m68k/mac/psc.c +++ b/arch/m68k/mac/psc.c @@ -180,20 +180,3 @@ void psc_irq_disable(int irq) { #endif psc_write_byte(pIER, 1 << irq_idx); } - -void psc_irq_clear(int irq) { - int irq_src = IRQ_SRC(irq); - int irq_idx = IRQ_IDX(irq); - int pIFR = pIERbase + (irq_src << 4); - - psc_write_byte(pIFR, 1 << irq_idx); -} - -int psc_irq_pending(int irq) -{ - int irq_src = IRQ_SRC(irq); - int irq_idx = IRQ_IDX(irq); - int pIFR = pIERbase + (irq_src << 4); - - return psc_read_byte(pIFR) & (1 << irq_idx); -} diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index f1600ad26621..2d85662715fb 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -63,24 +63,50 @@ static int gIER,gIFR,gBufA,gBufB; #define MAC_CLOCK_LOW (MAC_CLOCK_TICK&0xFF) #define MAC_CLOCK_HIGH (MAC_CLOCK_TICK>>8) -/* To disable a NuBus slot on Quadras we make that slot IRQ line an output set - * high. On RBV we just use the slot interrupt enable register. On Macs with - * genuine VIA chips we must use nubus_disabled to keep track of disabled slot - * interrupts. When any slot IRQ is disabled we mask the (edge triggered) CA1 - * or "SLOTS" interrupt. When no slot is disabled, we unmask the CA1 interrupt. - * So, on genuine VIAs, having more than one NuBus IRQ can mean trouble, - * because closing one of those drivers can mask all of the NuBus interrupts. - * Also, since we can't mask the unregistered slot IRQs on genuine VIAs, it's - * possible to get interrupts from cards that MacOS or the ROM has configured - * but we have not. FWIW, "Designing Cards and Drivers for Macintosh II and - * Macintosh SE", page 9-8, says, a slot IRQ with no driver would crash MacOS. + +/* + * On Macs with a genuine VIA chip there is no way to mask an individual slot + * interrupt. This limitation also seems to apply to VIA clone logic cores in + * Quadra-like ASICs. (RBV and OSS machines don't have this limitation.) + * + * We used to fake it by configuring the relevent VIA pin as an output + * (to mask the interrupt) or input (to unmask). That scheme did not work on + * (at least) the Quadra 700. A NuBus card's /NMRQ signal is an open-collector + * circuit (see Designing Cards and Drivers for Macintosh II and Macintosh SE, + * p. 10-11 etc) but VIA outputs are not (see datasheet). + * + * Driving these outputs high must cause the VIA to source current and the + * card to sink current when it asserts /NMRQ. Current will flow but the pin + * voltage is uncertain and so the /NMRQ condition may still cause a transition + * at the VIA2 CA1 input (which explains the lost interrupts). A side effect + * is that a disabled slot IRQ can never be tested as pending or not. + * + * Driving these outputs low doesn't work either. All the slot /NMRQ lines are + * (active low) OR'd together to generate the CA1 (aka "SLOTS") interrupt (see + * The Guide To Macintosh Family Hardware, 2nd edition p. 167). If we drive a + * disabled /NMRQ line low, the falling edge immediately triggers a CA1 + * interrupt and all slot interrupts after that will generate no transition + * and therefore no interrupt, even after being re-enabled. + * + * So we make the VIA port A I/O lines inputs and use nubus_disabled to keep + * track of their states. When any slot IRQ becomes disabled we mask the CA1 + * umbrella interrupt. Only when all slot IRQs become enabled do we unmask + * the CA1 interrupt. It must remain enabled even when cards have no interrupt + * handler registered. Drivers must therefore disable a slot interrupt at the + * device before they call free_irq (like shared and autovector interrupts). + * + * There is also a related problem when MacOS is used to boot Linux. A network + * card brought up by a MacOS driver may raise an interrupt while Linux boots. + * This can be fatal since it can't be handled until the right driver loads + * (if such a driver exists at all). Apparently related to this hardware + * limitation, "Designing Cards and Drivers", p. 9-8, says that a slot + * interrupt with no driver would crash MacOS (the book was written before + * the appearance of Macs with RBV or OSS). */ + static u8 nubus_disabled; void via_debug_dump(void); -void via_irq_enable(int irq); -void via_irq_disable(int irq); -void via_irq_clear(int irq); /* * Initialize the VIAs @@ -100,7 +126,7 @@ void __init via_init(void) /* IIci, IIsi, IIvx, IIvi (P6xx), LC series */ - case MAC_VIA_IIci: + case MAC_VIA_IICI: via1 = (void *) VIA1_BASE; if (macintosh_config->ident == MAC_MODEL_IIFX) { via2 = NULL; @@ -197,38 +223,17 @@ void __init via_init(void) if (oss_present) return; - /* Some machines support an alternate IRQ mapping that spreads */ - /* Ethernet and Sound out to their own autolevel IRQs and moves */ - /* VIA1 to level 6. A/UX uses this mapping and we do too. Note */ - /* that the IIfx emulates this alternate mapping using the OSS. */ - - via_alt_mapping = 0; - if (macintosh_config->via_type == MAC_VIA_QUADRA) - switch (macintosh_config->ident) { - case MAC_MODEL_C660: - case MAC_MODEL_Q840: - /* not applicable */ - break; - case MAC_MODEL_P588: - case MAC_MODEL_TV: - case MAC_MODEL_PB140: - case MAC_MODEL_PB145: - case MAC_MODEL_PB160: - case MAC_MODEL_PB165: - case MAC_MODEL_PB165C: - case MAC_MODEL_PB170: - case MAC_MODEL_PB180: - case MAC_MODEL_PB180C: - case MAC_MODEL_PB190: - case MAC_MODEL_PB520: - /* not yet tested */ - break; - default: - via_alt_mapping = 1; - via1[vDirB] |= 0x40; - via1[vBufB] &= ~0x40; - break; - } + if ((macintosh_config->via_type == MAC_VIA_QUADRA) && + (macintosh_config->adb_type != MAC_ADB_PB1) && + (macintosh_config->adb_type != MAC_ADB_PB2) && + (macintosh_config->ident != MAC_MODEL_C660) && + (macintosh_config->ident != MAC_MODEL_Q840)) { + via_alt_mapping = 1; + via1[vDirB] |= 0x40; + via1[vBufB] &= ~0x40; + } else { + via_alt_mapping = 0; + } /* * Now initialize VIA2. For RBV we just kill all interrupts; @@ -248,22 +253,28 @@ void __init via_init(void) via2[vACR] &= ~0x03; /* disable port A & B latches */ } + /* Everything below this point is VIA2 only... */ + + if (rbv_present) + return; + /* - * Set vPCR for control line interrupts (but not on RBV) + * Set vPCR for control line interrupts. + * + * CA1 (SLOTS IRQ), CB1 (ASC IRQ): negative edge trigger. + * + * Macs with ESP SCSI have a negative edge triggered SCSI interrupt. + * Testing reveals that PowerBooks do too. However, the SE/30 + * schematic diagram shows an active high NCR5380 IRQ line. */ - if (!rbv_present) { - /* For all VIA types, CA1 (SLOTS IRQ) and CB1 (ASC IRQ) - * are made negative edge triggered here. - */ - if (macintosh_config->scsi_type == MAC_SCSI_OLD) { - /* CB2 (IRQ) indep. input, positive edge */ - /* CA2 (DRQ) indep. input, positive edge */ - via2[vPCR] = 0x66; - } else { - /* CB2 (IRQ) indep. input, negative edge */ - /* CA2 (DRQ) indep. input, negative edge */ - via2[vPCR] = 0x22; - } + + pr_debug("VIA2 vPCR is 0x%02X\n", via2[vPCR]); + if (macintosh_config->via_type == MAC_VIA_II) { + /* CA2 (SCSI DRQ), CB2 (SCSI IRQ): indep. input, pos. edge */ + via2[vPCR] = 0x66; + } else { + /* CA2 (SCSI DRQ), CB2 (SCSI IRQ): indep. input, neg. edge */ + via2[vPCR] = 0x22; } } @@ -378,34 +389,55 @@ void __init via_nubus_init(void) via2[gBufB] |= 0x02; } - /* Disable all the slot interrupts (where possible). */ + /* + * Disable the slot interrupts. On some hardware that's not possible. + * On some hardware it's unclear what all of these I/O lines do. + */ switch (macintosh_config->via_type) { case MAC_VIA_II: - /* Just make the port A lines inputs. */ - switch(macintosh_config->ident) { - case MAC_MODEL_II: - case MAC_MODEL_IIX: - case MAC_MODEL_IICX: - case MAC_MODEL_SE30: - /* The top two bits are RAM size outputs. */ - via2[vDirA] &= 0xC0; - break; - default: - via2[vDirA] &= 0x80; - } + case MAC_VIA_QUADRA: + pr_debug("VIA2 vDirA is 0x%02X\n", via2[vDirA]); break; - case MAC_VIA_IIci: + case MAC_VIA_IICI: /* RBV. Disable all the slot interrupts. SIER works like IER. */ via2[rSIER] = 0x7F; break; + } +} + +void via_nubus_irq_startup(int irq) +{ + int irq_idx = IRQ_IDX(irq); + + switch (macintosh_config->via_type) { + case MAC_VIA_II: case MAC_VIA_QUADRA: - /* Disable the inactive slot interrupts by making those lines outputs. */ - if ((macintosh_config->adb_type != MAC_ADB_PB1) && - (macintosh_config->adb_type != MAC_ADB_PB2)) { - via2[vBufA] |= 0x7F; - via2[vDirA] |= 0x7F; + /* Make the port A line an input. Probably redundant. */ + if (macintosh_config->via_type == MAC_VIA_II) { + /* The top two bits are RAM size outputs. */ + via2[vDirA] &= 0xC0 | ~(1 << irq_idx); + } else { + /* Allow NuBus slots 9 through F. */ + via2[vDirA] &= 0x80 | ~(1 << irq_idx); } + /* fall through */ + case MAC_VIA_IICI: + via_irq_enable(irq); + break; + } +} + +void via_nubus_irq_shutdown(int irq) +{ + switch (macintosh_config->via_type) { + case MAC_VIA_II: + case MAC_VIA_QUADRA: + /* Ensure that the umbrella CA1 interrupt remains enabled. */ + via_irq_enable(irq); + break; + case MAC_VIA_IICI: + via_irq_disable(irq); break; } } @@ -531,25 +563,18 @@ void via_irq_enable(int irq) { } else if (irq_src == 7) { switch (macintosh_config->via_type) { case MAC_VIA_II: + case MAC_VIA_QUADRA: nubus_disabled &= ~(1 << irq_idx); /* Enable the CA1 interrupt when no slot is disabled. */ if (!nubus_disabled) via2[gIER] = IER_SET_BIT(1); break; - case MAC_VIA_IIci: + case MAC_VIA_IICI: /* On RBV, enable the slot interrupt. * SIER works like IER. */ via2[rSIER] = IER_SET_BIT(irq_idx); break; - case MAC_VIA_QUADRA: - /* Make the port A line an input to enable the slot irq. - * But not on PowerBooks, that's ADB. - */ - if ((macintosh_config->adb_type != MAC_ADB_PB1) && - (macintosh_config->adb_type != MAC_ADB_PB2)) - via2[vDirA] &= ~(1 << irq_idx); - break; } } } @@ -569,60 +594,18 @@ void via_irq_disable(int irq) { } else if (irq_src == 7) { switch (macintosh_config->via_type) { case MAC_VIA_II: + case MAC_VIA_QUADRA: nubus_disabled |= 1 << irq_idx; if (nubus_disabled) via2[gIER] = IER_CLR_BIT(1); break; - case MAC_VIA_IIci: + case MAC_VIA_IICI: via2[rSIER] = IER_CLR_BIT(irq_idx); break; - case MAC_VIA_QUADRA: - if ((macintosh_config->adb_type != MAC_ADB_PB1) && - (macintosh_config->adb_type != MAC_ADB_PB2)) - via2[vDirA] |= 1 << irq_idx; - break; } } } -void via_irq_clear(int irq) { - int irq_src = IRQ_SRC(irq); - int irq_idx = IRQ_IDX(irq); - int irq_bit = 1 << irq_idx; - - if (irq_src == 1) { - via1[vIFR] = irq_bit; - } else if (irq_src == 2) { - via2[gIFR] = irq_bit | rbv_clear; - } else if (irq_src == 7) { - /* FIXME: There is no way to clear an individual nubus slot - * IRQ flag, other than getting the device to do it. - */ - } -} - -/* - * Returns nonzero if an interrupt is pending on the given - * VIA/IRQ combination. - */ - -int via_irq_pending(int irq) -{ - int irq_src = IRQ_SRC(irq); - int irq_idx = IRQ_IDX(irq); - int irq_bit = 1 << irq_idx; - - if (irq_src == 1) { - return via1[vIFR] & irq_bit; - } else if (irq_src == 2) { - return via2[gIFR] & irq_bit; - } else if (irq_src == 7) { - /* Always 0 for MAC_VIA_QUADRA if the slot irq is disabled. */ - return ~via2[gBufA] & irq_bit; - } - return 0; -} - void via1_set_head(int head) { if (head == 0) @@ -631,3 +614,9 @@ void via1_set_head(int head) via1[vBufA] |= VIA1A_vHeadSel; } EXPORT_SYMBOL(via1_set_head); + +int via2_scsi_drq_pending(void) +{ + return via2[gIFR] & (1 << IRQ_IDX(IRQ_MAC_SCSIDRQ)); +} +EXPORT_SYMBOL(via2_scsi_drq_pending); diff --git a/arch/m68k/mm/Makefile b/arch/m68k/mm/Makefile index 09cadf1058d5..cfbf3205724a 100644 --- a/arch/m68k/mm/Makefile +++ b/arch/m68k/mm/Makefile @@ -4,6 +4,8 @@ obj-y := init.o -obj-$(CONFIG_MMU) += cache.o fault.o hwtest.o -obj-$(CONFIG_MMU_MOTOROLA) += kmap.o memory.o motorola.o -obj-$(CONFIG_MMU_SUN3) += sun3kmap.o sun3mmu.o +obj-$(CONFIG_MMU) += cache.o fault.o +obj-$(CONFIG_MMU_MOTOROLA) += kmap.o memory.o motorola.o hwtest.o +obj-$(CONFIG_MMU_SUN3) += sun3kmap.o sun3mmu.o hwtest.o +obj-$(CONFIG_MMU_COLDFIRE) += kmap.o memory.o mcfmmu.o + diff --git a/arch/m68k/mm/cache.c b/arch/m68k/mm/cache.c index 5437fff5fe07..95d0bf66e2e2 100644 --- a/arch/m68k/mm/cache.c +++ b/arch/m68k/mm/cache.c @@ -74,8 +74,16 @@ static unsigned long virt_to_phys_slow(unsigned long vaddr) /* RZ: use cpush %bc instead of cpush %dc, cinv %ic */ void flush_icache_range(unsigned long address, unsigned long endaddr) { - - if (CPU_IS_040_OR_060) { + if (CPU_IS_COLDFIRE) { + unsigned long start, end; + start = address & ICACHE_SET_MASK; + end = endaddr & ICACHE_SET_MASK; + if (start > end) { + flush_cf_icache(0, end); + end = ICACHE_MAX_ADDR; + } + flush_cf_icache(start, end); + } else if (CPU_IS_040_OR_060) { address &= PAGE_MASK; do { @@ -100,7 +108,17 @@ EXPORT_SYMBOL(flush_icache_range); void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, unsigned long addr, int len) { - if (CPU_IS_040_OR_060) { + if (CPU_IS_COLDFIRE) { + unsigned long start, end; + start = addr & ICACHE_SET_MASK; + end = (addr + len) & ICACHE_SET_MASK; + if (start > end) { + flush_cf_icache(0, end); + end = ICACHE_MAX_ADDR; + } + flush_cf_icache(start, end); + + } else if (CPU_IS_040_OR_060) { asm volatile ("nop\n\t" ".chip 68040\n\t" "cpushp %%bc,(%0)\n\t" diff --git a/arch/m68k/mm/init_mm.c b/arch/m68k/mm/init_mm.c index bbe525434ccb..89f3b203814b 100644 --- a/arch/m68k/mm/init_mm.c +++ b/arch/m68k/mm/init_mm.c @@ -24,6 +24,7 @@ #include <asm/page.h> #include <asm/pgalloc.h> #include <asm/system.h> +#include <asm/traps.h> #include <asm/machdep.h> #include <asm/io.h> #ifdef CONFIG_ATARI @@ -75,6 +76,38 @@ extern void init_pointer_table(unsigned long ptable); extern pmd_t *zero_pgtable; +#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE) +#define VECTORS &vectors[0] +#else +#define VECTORS _ramvec +#endif + +void __init print_memmap(void) +{ +#define UL(x) ((unsigned long) (x)) +#define MLK(b, t) UL(b), UL(t), (UL(t) - UL(b)) >> 10 +#define MLM(b, t) UL(b), UL(t), (UL(t) - UL(b)) >> 20 +#define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), 1024) + + pr_notice("Virtual kernel memory layout:\n" + " vector : 0x%08lx - 0x%08lx (%4ld KiB)\n" + " kmap : 0x%08lx - 0x%08lx (%4ld MiB)\n" + " vmalloc : 0x%08lx - 0x%08lx (%4ld MiB)\n" + " lowmem : 0x%08lx - 0x%08lx (%4ld MiB)\n" + " .init : 0x%p" " - 0x%p" " (%4d KiB)\n" + " .text : 0x%p" " - 0x%p" " (%4d KiB)\n" + " .data : 0x%p" " - 0x%p" " (%4d KiB)\n" + " .bss : 0x%p" " - 0x%p" " (%4d KiB)\n", + MLK(VECTORS, VECTORS + 256), + MLM(KMAP_START, KMAP_END), + MLM(VMALLOC_START, VMALLOC_END), + MLM(PAGE_OFFSET, (unsigned long)high_memory), + MLK_ROUNDUP(__init_begin, __init_end), + MLK_ROUNDUP(_stext, _etext), + MLK_ROUNDUP(_sdata, _edata), + MLK_ROUNDUP(_sbss, _ebss)); +} + void __init mem_init(void) { pg_data_t *pgdat; @@ -106,7 +139,7 @@ void __init mem_init(void) } } -#ifndef CONFIG_SUN3 +#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) /* insert pointer tables allocated so far into the tablelist */ init_pointer_table((unsigned long)kernel_pg_dir); for (i = 0; i < PTRS_PER_PGD; i++) { @@ -125,6 +158,7 @@ void __init mem_init(void) codepages << (PAGE_SHIFT-10), datapages << (PAGE_SHIFT-10), initpages << (PAGE_SHIFT-10)); + print_memmap(); } #ifdef CONFIG_BLK_DEV_INITRD diff --git a/arch/m68k/mm/kmap.c b/arch/m68k/mm/kmap.c index 69345849454b..1cc2bed4c3dd 100644 --- a/arch/m68k/mm/kmap.c +++ b/arch/m68k/mm/kmap.c @@ -171,7 +171,8 @@ void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cachefla break; } } else { - physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY); + physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED | + _PAGE_DIRTY | _PAGE_READWRITE); switch (cacheflag) { case IOMAP_NOCACHE_SER: case IOMAP_NOCACHE_NONSER: diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c new file mode 100644 index 000000000000..babd5a97cdcb --- /dev/null +++ b/arch/m68k/mm/mcfmmu.c @@ -0,0 +1,198 @@ +/* + * Based upon linux/arch/m68k/mm/sun3mmu.c + * Based upon linux/arch/ppc/mm/mmu_context.c + * + * Implementations of mm routines specific to the Coldfire MMU. + * + * Copyright (c) 2008 Freescale Semiconductor, Inc. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/bootmem.h> + +#include <asm/setup.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/mmu_context.h> +#include <asm/mcf_pgalloc.h> +#include <asm/tlbflush.h> + +#define KMAPAREA(x) ((x >= VMALLOC_START) && (x < KMAP_END)) + +mm_context_t next_mmu_context; +unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1]; +atomic_t nr_free_contexts; +struct mm_struct *context_mm[LAST_CONTEXT+1]; +extern unsigned long num_pages; + +void free_initmem(void) +{ +} + +/* + * ColdFire paging_init derived from sun3. + */ +void __init paging_init(void) +{ + pgd_t *pg_dir; + pte_t *pg_table; + unsigned long address, size; + unsigned long next_pgtable, bootmem_end; + unsigned long zones_size[MAX_NR_ZONES]; + enum zone_type zone; + int i; + + empty_zero_page = (void *) alloc_bootmem_pages(PAGE_SIZE); + memset((void *) empty_zero_page, 0, PAGE_SIZE); + + pg_dir = swapper_pg_dir; + memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir)); + + size = num_pages * sizeof(pte_t); + size = (size + PAGE_SIZE) & ~(PAGE_SIZE-1); + next_pgtable = (unsigned long) alloc_bootmem_pages(size); + + bootmem_end = (next_pgtable + size + PAGE_SIZE) & PAGE_MASK; + pg_dir += PAGE_OFFSET >> PGDIR_SHIFT; + + address = PAGE_OFFSET; + while (address < (unsigned long)high_memory) { + pg_table = (pte_t *) next_pgtable; + next_pgtable += PTRS_PER_PTE * sizeof(pte_t); + pgd_val(*pg_dir) = (unsigned long) pg_table; + pg_dir++; + + /* now change pg_table to kernel virtual addresses */ + for (i = 0; i < PTRS_PER_PTE; ++i, ++pg_table) { + pte_t pte = pfn_pte(virt_to_pfn(address), PAGE_INIT); + if (address >= (unsigned long) high_memory) + pte_val(pte) = 0; + + set_pte(pg_table, pte); + address += PAGE_SIZE; + } + } + + current->mm = NULL; + + for (zone = 0; zone < MAX_NR_ZONES; zone++) + zones_size[zone] = 0x0; + zones_size[ZONE_DMA] = num_pages; + free_area_init(zones_size); +} + +int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word) +{ + unsigned long flags, mmuar; + struct mm_struct *mm; + pgd_t *pgd; + pmd_t *pmd; + pte_t *pte; + int asid; + + local_irq_save(flags); + + mmuar = (dtlb) ? mmu_read(MMUAR) : + regs->pc + (extension_word * sizeof(long)); + + mm = (!user_mode(regs) && KMAPAREA(mmuar)) ? &init_mm : current->mm; + if (!mm) { + local_irq_restore(flags); + return -1; + } + + pgd = pgd_offset(mm, mmuar); + if (pgd_none(*pgd)) { + local_irq_restore(flags); + return -1; + } + + pmd = pmd_offset(pgd, mmuar); + if (pmd_none(*pmd)) { + local_irq_restore(flags); + return -1; + } + + pte = (KMAPAREA(mmuar)) ? pte_offset_kernel(pmd, mmuar) + : pte_offset_map(pmd, mmuar); + if (pte_none(*pte) || !pte_present(*pte)) { + local_irq_restore(flags); + return -1; + } + + if (write) { + if (!pte_write(*pte)) { + local_irq_restore(flags); + return -1; + } + set_pte(pte, pte_mkdirty(*pte)); + } + + set_pte(pte, pte_mkyoung(*pte)); + asid = mm->context & 0xff; + if (!pte_dirty(*pte) && !KMAPAREA(mmuar)) + set_pte(pte, pte_wrprotect(*pte)); + + mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) | + (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK) + >> CF_PAGE_MMUTR_SHIFT) | MMUTR_V); + + mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) | + ((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X); + + if (dtlb) + mmu_write(MMUOR, MMUOR_ACC | MMUOR_UAA); + else + mmu_write(MMUOR, MMUOR_ITLB | MMUOR_ACC | MMUOR_UAA); + + local_irq_restore(flags); + return 0; +} + +/* + * Initialize the context management stuff. + * The following was taken from arch/ppc/mmu_context.c + */ +void __init mmu_context_init(void) +{ + /* + * Some processors have too few contexts to reserve one for + * init_mm, and require using context 0 for a normal task. + * Other processors reserve the use of context zero for the kernel. + * This code assumes FIRST_CONTEXT < 32. + */ + context_map[0] = (1 << FIRST_CONTEXT) - 1; + next_mmu_context = FIRST_CONTEXT; + atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1); +} + +/* + * Steal a context from a task that has one at the moment. + * This is only used on 8xx and 4xx and we presently assume that + * they don't do SMP. If they do then thicfpgalloc.hs will have to check + * whether the MM we steal is in use. + * We also assume that this is only used on systems that don't + * use an MMU hash table - this is true for 8xx and 4xx. + * This isn't an LRU system, it just frees up each context in + * turn (sort-of pseudo-random replacement :). This would be the + * place to implement an LRU scheme if anyone was motivated to do it. + * -- paulus + */ +void steal_context(void) +{ + struct mm_struct *mm; + /* + * free up context `next_mmu_context' + * if we shouldn't free context 0, don't... + */ + if (next_mmu_context < FIRST_CONTEXT) + next_mmu_context = FIRST_CONTEXT; + mm = context_mm[next_mmu_context]; + flush_tlb_mm(mm); + destroy_context(mm); +} + diff --git a/arch/m68k/mm/memory.c b/arch/m68k/mm/memory.c index 34c77ce24fba..a5dbb74fe1de 100644 --- a/arch/m68k/mm/memory.c +++ b/arch/m68k/mm/memory.c @@ -203,7 +203,9 @@ static inline void pushcl040(unsigned long paddr) void cache_clear (unsigned long paddr, int len) { - if (CPU_IS_040_OR_060) { + if (CPU_IS_COLDFIRE) { + flush_cf_bcache(0, DCACHE_MAX_ADDR); + } else if (CPU_IS_040_OR_060) { int tmp; /* @@ -250,7 +252,9 @@ EXPORT_SYMBOL(cache_clear); void cache_push (unsigned long paddr, int len) { - if (CPU_IS_040_OR_060) { + if (CPU_IS_COLDFIRE) { + flush_cf_bcache(0, DCACHE_MAX_ADDR); + } else if (CPU_IS_040_OR_060) { int tmp = PAGE_SIZE; /* diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c index 31a66d99cbca..c3fb3bdd7ed9 100644 --- a/arch/m68k/mvme16x/config.c +++ b/arch/m68k/mvme16x/config.c @@ -124,6 +124,163 @@ static void __init mvme16x_init_IRQ (void) #define PccSCCMICR 0x1d #define PccSCCTICR 0x1e #define PccSCCRICR 0x1f +#define PccTPIACKR 0x25 + +#ifdef CONFIG_EARLY_PRINTK + +/**** cd2401 registers ****/ +#define CD2401_ADDR (0xfff45000) + +#define CyGFRCR (0x81) +#define CyCCR (0x13) +#define CyCLR_CHAN (0x40) +#define CyINIT_CHAN (0x20) +#define CyCHIP_RESET (0x10) +#define CyENB_XMTR (0x08) +#define CyDIS_XMTR (0x04) +#define CyENB_RCVR (0x02) +#define CyDIS_RCVR (0x01) +#define CyCAR (0xee) +#define CyIER (0x11) +#define CyMdmCh (0x80) +#define CyRxExc (0x20) +#define CyRxData (0x08) +#define CyTxMpty (0x02) +#define CyTxRdy (0x01) +#define CyLICR (0x26) +#define CyRISR (0x89) +#define CyTIMEOUT (0x80) +#define CySPECHAR (0x70) +#define CyOVERRUN (0x08) +#define CyPARITY (0x04) +#define CyFRAME (0x02) +#define CyBREAK (0x01) +#define CyREOIR (0x84) +#define CyTEOIR (0x85) +#define CyMEOIR (0x86) +#define CyNOTRANS (0x08) +#define CyRFOC (0x30) +#define CyRDR (0xf8) +#define CyTDR (0xf8) +#define CyMISR (0x8b) +#define CyRISR (0x89) +#define CyTISR (0x8a) +#define CyMSVR1 (0xde) +#define CyMSVR2 (0xdf) +#define CyDSR (0x80) +#define CyDCD (0x40) +#define CyCTS (0x20) +#define CyDTR (0x02) +#define CyRTS (0x01) +#define CyRTPRL (0x25) +#define CyRTPRH (0x24) +#define CyCOR1 (0x10) +#define CyPARITY_NONE (0x00) +#define CyPARITY_E (0x40) +#define CyPARITY_O (0xC0) +#define Cy_5_BITS (0x04) +#define Cy_6_BITS (0x05) +#define Cy_7_BITS (0x06) +#define Cy_8_BITS (0x07) +#define CyCOR2 (0x17) +#define CyETC (0x20) +#define CyCtsAE (0x02) +#define CyCOR3 (0x16) +#define Cy_1_STOP (0x02) +#define Cy_2_STOP (0x04) +#define CyCOR4 (0x15) +#define CyREC_FIFO (0x0F) /* Receive FIFO threshold */ +#define CyCOR5 (0x14) +#define CyCOR6 (0x18) +#define CyCOR7 (0x07) +#define CyRBPR (0xcb) +#define CyRCOR (0xc8) +#define CyTBPR (0xc3) +#define CyTCOR (0xc0) +#define CySCHR1 (0x1f) +#define CySCHR2 (0x1e) +#define CyTPR (0xda) +#define CyPILR1 (0xe3) +#define CyPILR2 (0xe0) +#define CyPILR3 (0xe1) +#define CyCMR (0x1b) +#define CyASYNC (0x02) +#define CyLICR (0x26) +#define CyLIVR (0x09) +#define CySCRL (0x23) +#define CySCRH (0x22) +#define CyTFTC (0x80) + +static void cons_write(struct console *co, const char *str, unsigned count) +{ + volatile unsigned char *base_addr = (u_char *)CD2401_ADDR; + volatile u_char sink; + u_char ier; + int port; + u_char do_lf = 0; + int i = 0; + + /* Ensure transmitter is enabled! */ + + port = 0; + base_addr[CyCAR] = (u_char)port; + while (base_addr[CyCCR]) + ; + base_addr[CyCCR] = CyENB_XMTR; + + ier = base_addr[CyIER]; + base_addr[CyIER] = CyTxMpty; + + while (1) { + if (pcc2chip[PccSCCTICR] & 0x20) + { + /* We have a Tx int. Acknowledge it */ + sink = pcc2chip[PccTPIACKR]; + if ((base_addr[CyLICR] >> 2) == port) { + if (i == count) { + /* Last char of string is now output */ + base_addr[CyTEOIR] = CyNOTRANS; + break; + } + if (do_lf) { + base_addr[CyTDR] = '\n'; + str++; + i++; + do_lf = 0; + } + else if (*str == '\n') { + base_addr[CyTDR] = '\r'; + do_lf = 1; + } + else { + base_addr[CyTDR] = *str++; + i++; + } + base_addr[CyTEOIR] = 0; + } + else + base_addr[CyTEOIR] = CyNOTRANS; + } + } + + base_addr[CyIER] = ier; +} + +static struct console cons_info = +{ + .name = "sercon", + .write = cons_write, + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1, +}; + +static void __init mvme16x_early_console(void) +{ + register_console(&cons_info); + + printk(KERN_INFO "MVME16x: early console registered\n"); +} +#endif void __init config_mvme16x(void) { @@ -183,6 +340,9 @@ void __init config_mvme16x(void) pcc2chip[PccSCCMICR] = 0x10; pcc2chip[PccSCCTICR] = 0x10; pcc2chip[PccSCCRICR] = 0x10; +#ifdef CONFIG_EARLY_PRINTK + mvme16x_early_console(); +#endif } } diff --git a/arch/m68k/platform/54xx/config.c b/arch/m68k/platform/54xx/config.c index 78130984db95..ee043540bfa2 100644 --- a/arch/m68k/platform/54xx/config.c +++ b/arch/m68k/platform/54xx/config.c @@ -13,11 +13,17 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/mm.h> +#include <linux/bootmem.h> +#include <asm/pgalloc.h> #include <asm/machdep.h> #include <asm/coldfire.h> #include <asm/m54xxsim.h> #include <asm/mcfuart.h> #include <asm/m54xxgpt.h> +#ifdef CONFIG_MMU +#include <asm/mmu_context.h> +#endif /***************************************************************************/ @@ -95,8 +101,49 @@ static void mcf54xx_reset(void) /***************************************************************************/ +#ifdef CONFIG_MMU + +unsigned long num_pages; + +static void __init mcf54xx_bootmem_alloc(void) +{ + unsigned long start_pfn; + unsigned long memstart; + + /* _rambase and _ramend will be naturally page aligned */ + m68k_memory[0].addr = _rambase; + m68k_memory[0].size = _ramend - _rambase; + + /* compute total pages in system */ + num_pages = (_ramend - _rambase) >> PAGE_SHIFT; + + /* page numbers */ + memstart = PAGE_ALIGN(_ramstart); + min_low_pfn = _rambase >> PAGE_SHIFT; + start_pfn = memstart >> PAGE_SHIFT; + max_low_pfn = _ramend >> PAGE_SHIFT; + high_memory = (void *)_ramend; + + m68k_virt_to_node_shift = fls(_ramend - _rambase - 1) - 6; + module_fixup(NULL, __start_fixup, __stop_fixup); + + /* setup bootmem data */ + m68k_setup_node(0); + memstart += init_bootmem_node(NODE_DATA(0), start_pfn, + min_low_pfn, max_low_pfn); + free_bootmem_node(NODE_DATA(0), memstart, _ramend - memstart); +} + +#endif /* CONFIG_MMU */ + +/***************************************************************************/ + void __init config_BSP(char *commandp, int size) { +#ifdef CONFIG_MMU + mcf54xx_bootmem_alloc(); + mmu_context_init(); +#endif mach_reset = mcf54xx_reset; m54xx_uarts_init(); } diff --git a/arch/m68k/platform/68328/Makefile b/arch/m68k/platform/68328/Makefile index e4dfd8fde068..ee61bf84d4a0 100644 --- a/arch/m68k/platform/68328/Makefile +++ b/arch/m68k/platform/68328/Makefile @@ -14,12 +14,8 @@ obj-$(CONFIG_M68328) += config.o obj-$(CONFIG_ROM) += romvec.o extra-y := head.o -extra-$(CONFIG_M68328) += bootlogo.rh head.o - -$(obj)/bootlogo.rh: $(src)/bootlogo.h - perl $(src)/bootlogo.pl < $(src)/bootlogo.h > $(obj)/bootlogo.rh $(obj)/head.o: $(obj)/$(head-y) ln -sf $(head-y) $(obj)/head.o -clean-files := $(obj)/bootlogo.rh $(obj)/head.o $(head-y) +clean-files := $(obj)/head.o $(head-y) diff --git a/arch/m68k/platform/68328/bootlogo.h b/arch/m68k/platform/68328/bootlogo.h index 67bc2c17386e..b896c933fafc 100644 --- a/arch/m68k/platform/68328/bootlogo.h +++ b/arch/m68k/platform/68328/bootlogo.h @@ -1,6 +1,6 @@ #define bootlogo_width 160 #define bootlogo_height 160 -static unsigned char bootlogo_bits[] = { +unsigned char __attribute__ ((aligned(16))) bootlogo_bits[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x55, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, diff --git a/arch/m68k/platform/68328/bootlogo.pl b/arch/m68k/platform/68328/bootlogo.pl deleted file mode 100644 index b04ae3f50da5..000000000000 --- a/arch/m68k/platform/68328/bootlogo.pl +++ /dev/null @@ -1,10 +0,0 @@ - -$_ = join("", <>); - -s/(0x[0-9a-f]{2})/sprintf("0x%.2x",ord(pack("b8",unpack("B8",chr(hex($1))))))/gei; - -s/^ / .byte /gm; -s/[,};]+$//gm; -s/^static.*//gm; - -print $_; diff --git a/arch/m68k/platform/68328/config.c b/arch/m68k/platform/68328/config.c index a7bd21deb00f..d70bf2623db1 100644 --- a/arch/m68k/platform/68328/config.c +++ b/arch/m68k/platform/68328/config.c @@ -20,6 +20,9 @@ #include <asm/system.h> #include <asm/machdep.h> #include <asm/MC68328.h> +#if defined(CONFIG_PILOT) || defined(CONFIG_INIT_LCD) +#include "bootlogo.h" +#endif /***************************************************************************/ diff --git a/arch/m68k/platform/68328/head-pilot.S b/arch/m68k/platform/68328/head-pilot.S index aecff532b343..2ebfd6420818 100644 --- a/arch/m68k/platform/68328/head-pilot.S +++ b/arch/m68k/platform/68328/head-pilot.S @@ -24,19 +24,7 @@ .global _ramstart .global _ramend -.global penguin_bits - -#ifdef CONFIG_PILOT - -#define IMR 0xFFFFF304 - - .data - .align 16 - -penguin_bits: -#include "bootlogo.rh" - -#endif +.global bootlogo_bits /*****************************************************************************/ @@ -185,9 +173,6 @@ L3: moveq #79, %d7 movel %d0, _ramend - movel %a3, %d0 - movel %d0, rom_length - pea 0 pea env pea %sp@(4) @@ -196,7 +181,7 @@ L3: DBG_PUTC('H') #ifdef CONFIG_PILOT - movel #penguin_bits, 0xFFFFFA00 + movel #bootlogo_bits, 0xFFFFFA00 moveb #10, 0xFFFFFA05 movew #160, 0xFFFFFA08 movew #160, 0xFFFFFA0A diff --git a/arch/m68k/platform/68328/head-rom.S b/arch/m68k/platform/68328/head-rom.S index 6ec77d3ea0b3..a5ff96d0295f 100644 --- a/arch/m68k/platform/68328/head-rom.S +++ b/arch/m68k/platform/68328/head-rom.S @@ -8,7 +8,7 @@ .global _ramend #ifdef CONFIG_INIT_LCD - .global splash_bits + .global bootlogo_bits #endif .data @@ -29,16 +29,11 @@ _ramend: #define RAMEND (CONFIG_RAMBASE + CONFIG_RAMSIZE) -#ifdef CONFIG_INIT_LCD -splash_bits: -#include "bootlogo.rh" -#endif - .text _start: _stext: movew #0x2700,%sr #ifdef CONFIG_INIT_LCD - movel #splash_bits, 0xfffffA00 /* LSSA */ + movel #bootlogo_bits, 0xfffffA00 /* LSSA */ moveb #0x28, 0xfffffA05 /* LVPW */ movew #0x280, 0xFFFFFa08 /* LXMAX */ movew #0x1df, 0xFFFFFa0a /* LYMAX */ diff --git a/arch/m68k/platform/68328/timers.c b/arch/m68k/platform/68328/timers.c index 309f725995bf..f2678866067b 100644 --- a/arch/m68k/platform/68328/timers.c +++ b/arch/m68k/platform/68328/timers.c @@ -93,7 +93,6 @@ static struct clocksource m68328_clk = { .name = "timer", .rating = 250, .read = m68328_read_clk, - .shift = 20, .mask = CLOCKSOURCE_MASK(32), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -115,8 +114,7 @@ void hw_timer_init(void) /* Enable timer 1 */ TCTL |= TCTL_TEN; - m68328_clk.mult = clocksource_hz2mult(TICKS_PER_JIFFY*HZ, m68328_clk.shift); - clocksource_register(&m68328_clk); + clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ); } /***************************************************************************/ diff --git a/arch/m68k/platform/coldfire/dma_timer.c b/arch/m68k/platform/coldfire/dma_timer.c index a5f562823d7a..235ad57c4707 100644 --- a/arch/m68k/platform/coldfire/dma_timer.c +++ b/arch/m68k/platform/coldfire/dma_timer.c @@ -44,7 +44,6 @@ static struct clocksource clocksource_cf_dt = { .rating = 200, .read = cf_dt_get_cycles, .mask = CLOCKSOURCE_MASK(32), - .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -60,9 +59,7 @@ static int __init init_cf_dt_clocksource(void) __raw_writeb(0x00, DTER0); __raw_writel(0x00000000, DTRR0); __raw_writew(DMA_DTMR_CLK_DIV_16 | DMA_DTMR_ENABLE, DTMR0); - clocksource_cf_dt.mult = clocksource_hz2mult(DMA_FREQ, - clocksource_cf_dt.shift); - return clocksource_register(&clocksource_cf_dt); + return clocksource_register_hz(&clocksource_cf_dt, DMA_FREQ); } arch_initcall(init_cf_dt_clocksource); diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S index 3157461a8d1d..863889fc31c9 100644 --- a/arch/m68k/platform/coldfire/entry.S +++ b/arch/m68k/platform/coldfire/entry.S @@ -54,7 +54,6 @@ sw_usp: .globl ret_from_signal .globl sys_call_table .globl inthandler -.globl fasthandler enosys: mov.l #sys_ni_syscall,%d3 @@ -63,6 +62,7 @@ enosys: ENTRY(system_call) SAVE_ALL_SYS move #0x2000,%sr /* enable intrs again */ + GET_CURRENT(%d2) cmpl #NR_syscalls,%d0 jcc enosys @@ -166,6 +166,7 @@ Lsignal_return: */ ENTRY(inthandler) SAVE_ALL_INT + GET_CURRENT(%d2) movew %sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */ andl #0x03fc,%d0 /* mask out vector only */ @@ -191,7 +192,9 @@ ENTRY(resume) movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack pointer */ RDUSP /* movel %usp,%a3 */ movel %a3,%a0@(TASK_THREAD+THREAD_USP) /* save thread user stack */ - +#ifdef CONFIG_MMU + movel %a1,%a2 /* set new current */ +#endif movel %a1@(TASK_THREAD+THREAD_USP),%a3 /* restore thread user stack */ WRUSP /* movel %a3,%usp */ movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new kernel stack */ diff --git a/arch/m68k/platform/coldfire/gpio.c b/arch/m68k/platform/coldfire/gpio.c index ff0045793450..292a1a5a2d7c 100644 --- a/arch/m68k/platform/coldfire/gpio.c +++ b/arch/m68k/platform/coldfire/gpio.c @@ -15,7 +15,7 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <asm/gpio.h> #include <asm/pinmux.h> @@ -115,13 +115,14 @@ void mcf_gpio_free(struct gpio_chip *chip, unsigned offset) mcf_pinmux_release(mcf_chip->gpio_to_pinmux[offset], 0); } -struct sysdev_class mcf_gpio_sysclass = { - .name = "gpio", +struct bus_type mcf_gpio_subsys = { + .name = "gpio", + .dev_name = "gpio", }; static int __init mcf_gpio_sysinit(void) { - return sysdev_class_register(&mcf_gpio_sysclass); + return subsys_system_register(&mcf_gpio_subsys, NULL); } core_initcall(mcf_gpio_sysinit); diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S index c33483824a2e..38f04a3f6207 100644 --- a/arch/m68k/platform/coldfire/head.S +++ b/arch/m68k/platform/coldfire/head.S @@ -3,7 +3,7 @@ /* * head.S -- common startup code for ColdFire CPUs. * - * (C) Copyright 1999-2010, Greg Ungerer <gerg@snapgear.com>. + * (C) Copyright 1999-2011, Greg Ungerer <gerg@snapgear.com>. */ /*****************************************************************************/ @@ -13,6 +13,7 @@ #include <asm/asm-offsets.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> +#include <asm/mcfmmu.h> #include <asm/thread_info.h> /*****************************************************************************/ @@ -135,6 +136,14 @@ _init_sp: __HEAD +#ifdef CONFIG_MMU +_start0: + jmp _start +.global kernel_pg_dir +.equ kernel_pg_dir,_start0 +.equ .,_start0+0x1000 +#endif + /* * This is the codes first entry point. This is where it all * begins... @@ -143,6 +152,9 @@ __HEAD _start: nop /* filler */ movew #0x2700, %sr /* no interrupts */ + movel #CACHE_INIT,%d0 /* disable cache */ + movec %d0,%CACR + nop #if defined(CONFIG_UBOOT) movel %sp,_init_sp /* save initial stack pointer */ #endif @@ -176,9 +188,6 @@ _start: * it is very similar. Define the exact settings in the headers * then the code here is the same for all. */ - movel #CACHE_INIT,%d0 /* invalidate whole cache */ - movec %d0,%CACR - nop movel #ACR0_MODE,%d0 /* set RAM region for caching */ movec %d0,%ACR0 movel #ACR1_MODE,%d0 /* anything else to cache? */ @@ -193,6 +202,26 @@ _start: movec %d0,%CACR nop +#ifdef CONFIG_MMU + /* + * Identity mapping for the kernel region. + */ + movel #(MMUBASE+1),%d0 /* enable MMUBAR registers */ + movec %d0,%MMUBAR + movel #MMUOR_CA,%d0 /* clear TLB entries */ + movel %d0,MMUOR + movel #0,%d0 /* set ASID to 0 */ + movec %d0,%asid + + movel #MMUCR_EN,%d0 /* Enable the identity map */ + movel %d0,MMUCR + nop /* sync i-pipeline */ + + movel #_vstart,%a0 /* jump to "virtual" space */ + jmp %a0@ +_vstart: +#endif /* CONFIG_MMU */ + #ifdef CONFIG_ROMFS_FS /* * Move ROM filesystem above bss :-) @@ -238,6 +267,22 @@ _clear_bss: lea init_thread_union,%a0 lea THREAD_SIZE(%a0),%sp +#ifdef CONFIG_MMU +.global m68k_cputype +.global m68k_mmutype +.global m68k_fputype +.global m68k_machtype + movel #CPU_COLDFIRE,%d0 + movel %d0,m68k_cputype /* Mark us as a ColdFire */ + movel #MMU_COLDFIRE,%d0 + movel %d0,m68k_mmutype + movel #FPU_COLDFIRE,%d0 + movel %d0,m68k_fputype + movel #MACH_M54XX,%d0 + movel %d0,m68k_machtype /* Mark us as a 54xx machine */ + lea init_task,%a2 /* Set "current" init task */ +#endif + /* * Assember start up done, start code proper. */ diff --git a/arch/m68k/platform/coldfire/pit.c b/arch/m68k/platform/coldfire/pit.c index c2b980926bec..02663d25822d 100644 --- a/arch/m68k/platform/coldfire/pit.c +++ b/arch/m68k/platform/coldfire/pit.c @@ -144,7 +144,6 @@ static struct clocksource pit_clk = { .name = "pit", .rating = 100, .read = pit_read_clk, - .shift = 20, .mask = CLOCKSOURCE_MASK(32), }; @@ -162,8 +161,7 @@ void hw_timer_init(void) setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq); - pit_clk.mult = clocksource_hz2mult(FREQ, pit_clk.shift); - clocksource_register(&pit_clk); + clocksource_register_hz(&pit_clk, FREQ); } /***************************************************************************/ diff --git a/arch/m68k/platform/coldfire/sltimers.c b/arch/m68k/platform/coldfire/sltimers.c index 6a85daf9a7fd..54e1452f853a 100644 --- a/arch/m68k/platform/coldfire/sltimers.c +++ b/arch/m68k/platform/coldfire/sltimers.c @@ -98,23 +98,25 @@ static struct irqaction mcfslt_timer_irq = { static cycle_t mcfslt_read_clk(struct clocksource *cs) { unsigned long flags; - u32 cycles; - u16 scnt; + u32 cycles, scnt; local_irq_save(flags); scnt = __raw_readl(TA(MCFSLT_SCNT)); cycles = mcfslt_cnt; + if (__raw_readl(TA(MCFSLT_SSR)) & MCFSLT_SSR_TE) { + cycles += mcfslt_cycles_per_jiffy; + scnt = __raw_readl(TA(MCFSLT_SCNT)); + } local_irq_restore(flags); /* subtract because slice timers count down */ - return cycles - scnt; + return cycles + ((mcfslt_cycles_per_jiffy - 1) - scnt); } static struct clocksource mcfslt_clk = { .name = "slt", .rating = 250, .read = mcfslt_read_clk, - .shift = 20, .mask = CLOCKSOURCE_MASK(32), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -136,8 +138,7 @@ void hw_timer_init(void) setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq); - mcfslt_clk.mult = clocksource_hz2mult(MCF_BUSCLK, mcfslt_clk.shift); - clocksource_register(&mcfslt_clk); + clocksource_register_hz(&mcfslt_clk, MCF_BUSCLK); #ifdef CONFIG_HIGHPROFILE mcfslt_profile_init(); diff --git a/arch/m68k/platform/coldfire/timers.c b/arch/m68k/platform/coldfire/timers.c index 60242f65fea9..0d90da32fcdb 100644 --- a/arch/m68k/platform/coldfire/timers.c +++ b/arch/m68k/platform/coldfire/timers.c @@ -88,7 +88,6 @@ static struct clocksource mcftmr_clk = { .name = "tmr", .rating = 250, .read = mcftmr_read_clk, - .shift = 20, .mask = CLOCKSOURCE_MASK(32), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -109,8 +108,7 @@ void hw_timer_init(void) __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 | MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR)); - mcftmr_clk.mult = clocksource_hz2mult(FREQ, mcftmr_clk.shift); - clocksource_register(&mcftmr_clk); + clocksource_register_hz(&mcftmr_clk, FREQ); setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq); diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index e446bab2427b..74f23a460ba2 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -17,6 +17,8 @@ config MICROBLAZE select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW + select GENERIC_PCI_IOMAP + select GENERIC_CPU_DEVICES config SWAP def_bool n diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h index cc54187f3d38..a175132e4496 100644 --- a/arch/microblaze/include/asm/irq.h +++ b/arch/microblaze/include/asm/irq.h @@ -9,7 +9,14 @@ #ifndef _ASM_MICROBLAZE_IRQ_H #define _ASM_MICROBLAZE_IRQ_H -#define NR_IRQS 32 + +/* + * Linux IRQ# is currently offset by one to map to the hardware + * irq number. So hardware IRQ0 maps to Linux irq 1. + */ +#define NO_IRQ_OFFSET 1 +#define IRQ_OFFSET NO_IRQ_OFFSET +#define NR_IRQS (32 + IRQ_OFFSET) #include <asm-generic/irq.h> /* This type is the placeholder for a hardware interrupt number. It has to @@ -20,8 +27,6 @@ typedef unsigned long irq_hw_number_t; extern unsigned int nr_irq; -#define NO_IRQ (-1) - struct pt_regs; extern void do_IRQ(struct pt_regs *regs); diff --git a/arch/microblaze/include/asm/memblock.h b/arch/microblaze/include/asm/memblock.h deleted file mode 100644 index 20a8e257c77f..000000000000 --- a/arch/microblaze/include/asm/memblock.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright (C) 2008 Michal Simek <monstr@monstr.eu> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_MEMBLOCK_H -#define _ASM_MICROBLAZE_MEMBLOCK_H - -#endif /* _ASM_MICROBLAZE_MEMBLOCK_H */ - - diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h index ed9d0f6e2cdb..a25e6b5e2ad4 100644 --- a/arch/microblaze/include/asm/page.h +++ b/arch/microblaze/include/asm/page.h @@ -174,15 +174,8 @@ extern int page_is_ram(unsigned long pfn); #define virt_addr_valid(vaddr) (pfn_valid(virt_to_pfn(vaddr))) - -# ifndef CONFIG_MMU -# define __pa(vaddr) ((unsigned long) (vaddr)) -# define __va(paddr) ((void *) (paddr)) -# else /* CONFIG_MMU */ -# define __pa(x) __virt_to_phys((unsigned long)(x)) -# define __va(x) ((void *)__phys_to_virt((unsigned long)(x))) -# endif /* CONFIG_MMU */ - +# define __pa(x) __virt_to_phys((unsigned long)(x)) +# define __va(x) ((void *)__phys_to_virt((unsigned long)(x))) /* Convert between virtual and physical address for MMU. */ /* Handle MicroBlaze processor with virtual memory. */ diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h index 32764cd077c6..e9834b2991d0 100644 --- a/arch/microblaze/include/asm/pci-bridge.h +++ b/arch/microblaze/include/asm/pci-bridge.h @@ -140,7 +140,6 @@ extern void pci_process_bridge_OF_ranges(struct pci_controller *hose, /* Allocate & free a PCI host bridge structure */ extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev); extern void pcibios_free_controller(struct pci_controller *phb); -extern void pcibios_setup_phb_resources(struct pci_controller *hose); #endif /* __KERNEL__ */ #endif /* _ASM_MICROBLAZE_PCI_BRIDGE_H */ diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h index 1dd9d6b1e275..033137628e8a 100644 --- a/arch/microblaze/include/asm/pci.h +++ b/arch/microblaze/include/asm/pci.h @@ -42,11 +42,6 @@ struct pci_dev; */ #define pcibios_assign_all_busses() 0 -static inline void pcibios_set_master(struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} - static inline void pcibios_penalize_isa_irq(int irq, int active) { /* We don't do dynamic PCI IRQ allocation */ diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h index 904e5ef6a11b..6c72ed7eba98 100644 --- a/arch/microblaze/include/asm/setup.h +++ b/arch/microblaze/include/asm/setup.h @@ -26,12 +26,6 @@ int setup_early_printk(char *opt); void remap_early_printk(void); void disable_early_printk(void); -#if defined(CONFIG_EARLY_PRINTK) -#define eprintk early_printk -#else -#define eprintk printk -#endif - void heartbeat(void); void setup_heartbeat(void); diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h index b73da2ac21b3..1a8ab6a5c03f 100644 --- a/arch/microblaze/include/asm/thread_info.h +++ b/arch/microblaze/include/asm/thread_info.h @@ -125,7 +125,6 @@ static inline struct thread_info *current_thread_info(void) #define TIF_MEMDIE 6 /* is terminating due to OOM killer */ #define TIF_SYSCALL_AUDIT 9 /* syscall auditing active */ #define TIF_SECCOMP 10 /* secure computing */ -#define TIF_FREEZE 14 /* Freezing for suspend */ /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_POLLING_NRFLAG 16 @@ -137,7 +136,6 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) #define _TIF_IRET (1 << TIF_IRET) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) -#define _TIF_FREEZE (1 << TIF_FREEZE) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index 7d7092b917ac..d20ffbc86beb 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -391,8 +391,11 @@ #define __NR_clock_adjtime 373 #define __NR_syncfs 374 #define __NR_setns 375 +#define __NR_sendmmsg 376 +#define __NR_process_vm_readv 377 +#define __NR_process_vm_writev 378 -#define __NR_syscalls 376 +#define __NR_syscalls 379 #ifdef __KERNEL__ #ifndef __ASSEMBLY__ diff --git a/arch/microblaze/kernel/early_printk.c b/arch/microblaze/kernel/early_printk.c index d26d92d47754..8356e47631c4 100644 --- a/arch/microblaze/kernel/early_printk.c +++ b/arch/microblaze/kernel/early_printk.c @@ -50,9 +50,9 @@ static void early_printk_uartlite_write(struct console *unused, const char *s, unsigned n) { while (*s && n-- > 0) { - early_printk_uartlite_putc(*s); if (*s == '\n') early_printk_uartlite_putc('\r'); + early_printk_uartlite_putc(*s); s++; } } @@ -94,9 +94,9 @@ static void early_printk_uart16550_write(struct console *unused, const char *s, unsigned n) { while (*s && n-- > 0) { - early_printk_uart16550_putc(*s); if (*s == '\n') early_printk_uart16550_putc('\r'); + early_printk_uart16550_putc(*s); s++; } } diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S index ca15bc5c7449..66e34a3bfe1b 100644 --- a/arch/microblaze/kernel/entry.S +++ b/arch/microblaze/kernel/entry.S @@ -468,7 +468,7 @@ C_ENTRY(sys_fork_wrapper): addi r5, r0, SIGCHLD /* Arg 0: flags */ lwi r6, r1, PT_R1 /* Arg 1: child SP (use parent's) */ addik r7, r1, 0 /* Arg 2: parent context */ - add r8. r0, r0 /* Arg 3: (unused) */ + add r8, r0, r0 /* Arg 3: (unused) */ add r9, r0, r0; /* Arg 4: (unused) */ brid do_fork /* Do real work (tail-call) */ add r10, r0, r0; /* Arg 5: (unused) */ diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c index eb41441c7fd0..44b177e2ab12 100644 --- a/arch/microblaze/kernel/intc.c +++ b/arch/microblaze/kernel/intc.c @@ -42,8 +42,9 @@ unsigned int nr_irq; static void intc_enable_or_unmask(struct irq_data *d) { - unsigned long mask = 1 << d->irq; - pr_debug("enable_or_unmask: %d\n", d->irq); + unsigned long mask = 1 << d->hwirq; + + pr_debug("enable_or_unmask: %ld\n", d->hwirq); out_be32(INTC_BASE + SIE, mask); /* ack level irqs because they can't be acked during @@ -56,20 +57,21 @@ static void intc_enable_or_unmask(struct irq_data *d) static void intc_disable_or_mask(struct irq_data *d) { - pr_debug("disable: %d\n", d->irq); - out_be32(INTC_BASE + CIE, 1 << d->irq); + pr_debug("disable: %ld\n", d->hwirq); + out_be32(INTC_BASE + CIE, 1 << d->hwirq); } static void intc_ack(struct irq_data *d) { - pr_debug("ack: %d\n", d->irq); - out_be32(INTC_BASE + IAR, 1 << d->irq); + pr_debug("ack: %ld\n", d->hwirq); + out_be32(INTC_BASE + IAR, 1 << d->hwirq); } static void intc_mask_ack(struct irq_data *d) { - unsigned long mask = 1 << d->irq; - pr_debug("disable_and_ack: %d\n", d->irq); + unsigned long mask = 1 << d->hwirq; + + pr_debug("disable_and_ack: %ld\n", d->hwirq); out_be32(INTC_BASE + CIE, mask); out_be32(INTC_BASE + IAR, mask); } @@ -91,7 +93,7 @@ unsigned int get_irq(struct pt_regs *regs) * order to handle multiple interrupt controllers. It currently * is hardcoded to check for interrupts only on the first INTC. */ - irq = in_be32(INTC_BASE + IVR); + irq = in_be32(INTC_BASE + IVR) + NO_IRQ_OFFSET; pr_debug("get_irq: %d\n", irq); return irq; @@ -99,7 +101,7 @@ unsigned int get_irq(struct pt_regs *regs) void __init init_IRQ(void) { - u32 i, j, intr_type; + u32 i, intr_mask; struct device_node *intc = NULL; #ifdef CONFIG_SELFMOD_INTC unsigned int intc_baseaddr = 0; @@ -113,35 +115,24 @@ void __init init_IRQ(void) 0 }; #endif - const char * const intc_list[] = { - "xlnx,xps-intc-1.00.a", - NULL - }; - - for (j = 0; intc_list[j] != NULL; j++) { - intc = of_find_compatible_node(NULL, NULL, intc_list[j]); - if (intc) - break; - } + intc = of_find_compatible_node(NULL, NULL, "xlnx,xps-intc-1.00.a"); BUG_ON(!intc); - intc_baseaddr = be32_to_cpup(of_get_property(intc, - "reg", NULL)); + intc_baseaddr = be32_to_cpup(of_get_property(intc, "reg", NULL)); intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE); nr_irq = be32_to_cpup(of_get_property(intc, "xlnx,num-intr-inputs", NULL)); - intr_type = - be32_to_cpup(of_get_property(intc, - "xlnx,kind-of-intr", NULL)); - if (intr_type > (u32)((1ULL << nr_irq) - 1)) + intr_mask = + be32_to_cpup(of_get_property(intc, "xlnx,kind-of-intr", NULL)); + if (intr_mask > (u32)((1ULL << nr_irq) - 1)) printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n"); #ifdef CONFIG_SELFMOD_INTC selfmod_function((int *) arr_func, intc_baseaddr); #endif - printk(KERN_INFO "%s #0 at 0x%08x, num_irq=%d, edge=0x%x\n", - intc_list[j], intc_baseaddr, nr_irq, intr_type); + printk(KERN_INFO "XPS intc #0 at 0x%08x, num_irq=%d, edge=0x%x\n", + intc_baseaddr, nr_irq, intr_mask); /* * Disable all external interrupts until they are @@ -155,8 +146,8 @@ void __init init_IRQ(void) /* Turn on the Master Enable. */ out_be32(intc_baseaddr + MER, MER_HIE | MER_ME); - for (i = 0; i < nr_irq; ++i) { - if (intr_type & (0x00000001 << i)) { + for (i = IRQ_OFFSET; i < (nr_irq + IRQ_OFFSET); ++i) { + if (intr_mask & (0x00000001 << (i - IRQ_OFFSET))) { irq_set_chip_and_handler_name(i, &intc_dev, handle_edge_irq, "edge"); irq_clear_status_flags(i, IRQ_LEVEL); @@ -165,5 +156,6 @@ void __init init_IRQ(void) handle_level_irq, "level"); irq_set_status_flags(i, IRQ_LEVEL); } + irq_get_irq_data(i)->hwirq = i - IRQ_OFFSET; } } diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c index e5d63a89b9b2..bbebcae72c02 100644 --- a/arch/microblaze/kernel/irq.c +++ b/arch/microblaze/kernel/irq.c @@ -33,11 +33,12 @@ void __irq_entry do_IRQ(struct pt_regs *regs) irq_enter(); irq = get_irq(regs); next_irq: - BUG_ON(irq == -1U); - generic_handle_irq(irq); + BUG_ON(!irq); + /* Substract 1 because of get_irq */ + generic_handle_irq(irq + IRQ_OFFSET - NO_IRQ_OFFSET); irq = get_irq(regs); - if (irq != -1U) { + if (irq) { pr_debug("next irq: %d\n", irq); ++concurrent_irq; goto next_irq; @@ -52,13 +53,13 @@ next_irq: intc without any cascades or any connection that's why mapping is 1:1 */ unsigned int irq_create_mapping(struct irq_host *host, irq_hw_number_t hwirq) { - return hwirq; + return hwirq + IRQ_OFFSET; } EXPORT_SYMBOL_GPL(irq_create_mapping); unsigned int irq_create_of_mapping(struct device_node *controller, const u32 *intspec, unsigned int intsize) { - return intspec[0]; + return intspec[0] + IRQ_OFFSET; } EXPORT_SYMBOL_GPL(irq_create_of_mapping); diff --git a/arch/microblaze/kernel/module.c b/arch/microblaze/kernel/module.c index 142426f631bb..f39257a5abcf 100644 --- a/arch/microblaze/kernel/module.c +++ b/arch/microblaze/kernel/module.c @@ -100,7 +100,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, break; case R_MICROBLAZE_64_NONE: - pr_debug("R_MICROBLAZE_NONE\n"); + pr_debug("R_MICROBLAZE_64_NONE\n"); break; case R_MICROBLAZE_NONE: diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index 95cc295976a7..7dcb5bfffb75 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -103,10 +103,12 @@ void cpu_idle(void) if (!idle) idle = default_idle; - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); + rcu_idle_enter(); while (!need_resched()) idle(); - tick_nohz_restart_sched_tick(); + rcu_idle_exit(); + tick_nohz_idle_exit(); preempt_enable_no_resched(); schedule(); diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c index 977484add216..80d314e81901 100644 --- a/arch/microblaze/kernel/prom.c +++ b/arch/microblaze/kernel/prom.c @@ -122,7 +122,6 @@ void __init early_init_devtree(void *params) of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line); /* Scan memory nodes and rebuild MEMBLOCKs */ - memblock_init(); of_scan_flat_dt(early_init_dt_scan_root, NULL); of_scan_flat_dt(early_init_dt_scan_memory, NULL); @@ -130,7 +129,7 @@ void __init early_init_devtree(void *params) strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE); parse_early_param(); - memblock_analyze(); + memblock_allow_resize(); pr_debug("Phys. mem: %lx\n", (unsigned long) memblock_phys_mem_size()); diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c index bd8ccab5ceff..88a01636f785 100644 --- a/arch/microblaze/kernel/reset.c +++ b/arch/microblaze/kernel/reset.c @@ -19,50 +19,11 @@ static int handle; /* reset pin handle */ static unsigned int reset_val; -static int of_reset_gpio_handle(void) -{ - int ret; /* variable which stored handle reset gpio pin */ - struct device_node *root; /* root node */ - struct device_node *gpio; /* gpio node */ - struct gpio_chip *gc; - u32 flags; - const void *gpio_spec; - - /* find out root node */ - root = of_find_node_by_path("/"); - - /* give me handle for gpio node to be possible allocate pin */ - ret = of_parse_phandles_with_args(root, "hard-reset-gpios", - "#gpio-cells", 0, &gpio, &gpio_spec); - if (ret) { - pr_debug("%s: can't parse gpios property\n", __func__); - goto err0; - } - - gc = of_node_to_gpiochip(gpio); - if (!gc) { - pr_debug("%s: gpio controller %s isn't registered\n", - root->full_name, gpio->full_name); - ret = -ENODEV; - goto err1; - } - - ret = gc->of_xlate(gc, root, gpio_spec, &flags); - if (ret < 0) - goto err1; - - ret += gc->base; -err1: - of_node_put(gpio); -err0: - pr_debug("%s exited with status %d\n", __func__, ret); - return ret; -} - void of_platform_reset_gpio_probe(void) { int ret; - handle = of_reset_gpio_handle(); + handle = of_get_named_gpio(of_find_node_by_path("/"), + "hard-reset-gpios", 0); if (!gpio_is_valid(handle)) { printk(KERN_INFO "Skipping unavailable RESET gpio %d (%s)\n", diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 0e654a12d37e..604cd9dd1333 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -145,32 +145,32 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, setup_early_printk(NULL); #endif - eprintk("Ramdisk addr 0x%08x, ", ram); + printk("Ramdisk addr 0x%08x, ", ram); if (fdt) - eprintk("FDT at 0x%08x\n", fdt); + printk("FDT at 0x%08x\n", fdt); else - eprintk("Compiled-in FDT at 0x%08x\n", + printk("Compiled-in FDT at 0x%08x\n", (unsigned int)_fdt_start); #ifdef CONFIG_MTD_UCLINUX - eprintk("Found romfs @ 0x%08x (0x%08x)\n", + printk("Found romfs @ 0x%08x (0x%08x)\n", romfs_base, romfs_size); - eprintk("#### klimit %p ####\n", old_klimit); + printk("#### klimit %p ####\n", old_klimit); BUG_ON(romfs_size < 0); /* What else can we do? */ - eprintk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n", + printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n", romfs_size, romfs_base, (unsigned)&_ebss); - eprintk("New klimit: 0x%08x\n", (unsigned)klimit); + printk("New klimit: 0x%08x\n", (unsigned)klimit); #endif #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR if (msr) - eprintk("!!!Your kernel has setup MSR instruction but " + printk("!!!Your kernel has setup MSR instruction but " "CPU don't have it %x\n", msr); #else if (!msr) - eprintk("!!!Your kernel not setup MSR instruction but " + printk("!!!Your kernel not setup MSR instruction but " "CPU have it %x\n", msr); #endif diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 8789daa2a346..6a2b294ef6dc 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -380,3 +380,6 @@ ENTRY(sys_call_table) .long sys_clock_adjtime .long sys_syncfs .long sys_setns /* 375 */ + .long sys_sendmmsg + .long sys_process_vm_readv + .long sys_process_vm_writev diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c index af74b1113aab..3cb0bf640135 100644 --- a/arch/microblaze/kernel/timer.c +++ b/arch/microblaze/kernel/timer.c @@ -243,7 +243,7 @@ static int timer_initialized; void __init time_init(void) { - u32 irq, i = 0; + u32 irq; u32 timer_num = 1; struct device_node *timer = NULL; const void *prop; @@ -258,33 +258,24 @@ void __init time_init(void) 0 }; #endif - const char * const timer_list[] = { - "xlnx,xps-timer-1.00.a", - NULL - }; - - for (i = 0; timer_list[i] != NULL; i++) { - timer = of_find_compatible_node(NULL, NULL, timer_list[i]); - if (timer) - break; - } + timer = of_find_compatible_node(NULL, NULL, "xlnx,xps-timer-1.00.a"); BUG_ON(!timer); timer_baseaddr = be32_to_cpup(of_get_property(timer, "reg", NULL)); timer_baseaddr = (unsigned long) ioremap(timer_baseaddr, PAGE_SIZE); - irq = be32_to_cpup(of_get_property(timer, "interrupts", NULL)); + irq = irq_of_parse_and_map(timer, 0); timer_num = be32_to_cpup(of_get_property(timer, "xlnx,one-timer-only", NULL)); if (timer_num) { - eprintk(KERN_EMERG "Please enable two timers in HW\n"); + printk(KERN_EMERG "Please enable two timers in HW\n"); BUG(); } #ifdef CONFIG_SELFMOD_TIMER selfmod_function((int *) arr_func, timer_baseaddr); #endif - printk(KERN_INFO "%s #0 at 0x%08x, irq=%d\n", - timer_list[i], timer_baseaddr, irq); + printk(KERN_INFO "XPS timer #0 at 0x%08x, irq=%d\n", + timer_baseaddr, irq); /* If there is clock-frequency property than use it */ prop = of_get_property(timer, "clock-frequency", NULL); diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile index c13067b243c3..844960e8ae18 100644 --- a/arch/microblaze/lib/Makefile +++ b/arch/microblaze/lib/Makefile @@ -20,6 +20,7 @@ lib-y += uaccess_old.o lib-y += ashldi3.o lib-y += ashrdi3.o +lib-y += cmpdi2.o lib-y += divsi3.o lib-y += lshrdi3.o lib-y += modsi3.o diff --git a/arch/microblaze/lib/cmpdi2.c b/arch/microblaze/lib/cmpdi2.c new file mode 100644 index 000000000000..a708400ea7b7 --- /dev/null +++ b/arch/microblaze/lib/cmpdi2.c @@ -0,0 +1,26 @@ +#include <linux/module.h> + +#include "libgcc.h" + +word_type __cmpdi2(long long a, long long b) +{ + const DWunion au = { + .ll = a + }; + const DWunion bu = { + .ll = b + }; + + if (au.s.high < bu.s.high) + return 0; + else if (au.s.high > bu.s.high) + return 2; + + if ((unsigned int) au.s.low < (unsigned int) bu.s.low) + return 0; + else if ((unsigned int) au.s.low > (unsigned int) bu.s.low) + return 2; + + return 1; +} +EXPORT_SYMBOL(__cmpdi2); diff --git a/arch/microblaze/pci/iomap.c b/arch/microblaze/pci/iomap.c index 57acda852f5a..b07abbac0319 100644 --- a/arch/microblaze/pci/iomap.c +++ b/arch/microblaze/pci/iomap.c @@ -10,25 +10,6 @@ #include <asm/io.h> #include <asm/pci-bridge.h> -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (!len) - return NULL; - if (max && len > max) - len = max; - if (flags & IORESOURCE_IO) - return ioport_map(start, len); - if (flags & IORESOURCE_MEM) - return ioremap(start, len); - /* What? */ - return NULL; -} -EXPORT_SYMBOL(pci_iomap); - void pci_iounmap(struct pci_dev *dev, void __iomem *addr) { if (isa_vaddr_is_ioport(addr)) diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c index db841c7b9d5b..85f2ac1230a8 100644 --- a/arch/microblaze/pci/pci-common.c +++ b/arch/microblaze/pci/pci-common.c @@ -190,6 +190,11 @@ int pcibios_add_platform_entries(struct pci_dev *pdev) return device_create_file(&pdev->dev, &dev_attr_devspec); } +void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} + char __devinit *pcibios_setup(char *str) { return str; @@ -242,7 +247,7 @@ int pci_read_irq_line(struct pci_dev *pci_dev) line, pin); virq = irq_create_mapping(NULL, line); - if (virq != NO_IRQ) + if (virq) irq_set_irq_type(virq, IRQ_TYPE_LEVEL_LOW); } else { pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n", @@ -253,7 +258,7 @@ int pci_read_irq_line(struct pci_dev *pci_dev) virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size); } - if (virq == NO_IRQ) { + if (!virq) { pr_debug(" Failed to map !\n"); return -1; } @@ -1019,7 +1024,6 @@ static void __devinit pcibios_fixup_bridge(struct pci_bus *bus) struct pci_dev *dev = bus->self; pci_bus_for_each_resource(bus, res, i) { - res = bus->resource[i]; if (!res) continue; if (!res->flags) @@ -1219,7 +1223,6 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus) pci_domain_nr(bus), bus->number); pci_bus_for_each_resource(bus, res, i) { - res = bus->resource[i]; if (!res || !res->flags || res->start > res->end || res->parent) continue; @@ -1510,14 +1513,18 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) return pci_enable_resources(dev, mask); } -void __devinit pcibios_setup_phb_resources(struct pci_controller *hose) +static void __devinit pcibios_setup_phb_resources(struct pci_controller *hose, struct list_head *resources) { - struct pci_bus *bus = hose->bus; struct resource *res; int i; /* Hookup PHB IO resource */ - bus->resource[0] = res = &hose->io_resource; + res = &hose->io_resource; + + /* Fixup IO space offset */ + io_offset = (unsigned long)hose->io_base_virt - isa_io_base; + res->start = (res->start + io_offset) & 0xffffffffu; + res->end = (res->end + io_offset) & 0xffffffffu; if (!res->flags) { printk(KERN_WARNING "PCI: I/O resource not set for host" @@ -1528,6 +1535,7 @@ void __devinit pcibios_setup_phb_resources(struct pci_controller *hose) res->end = res->start + IO_SPACE_LIMIT; res->flags = IORESOURCE_IO; } + pci_add_resource(resources, res); pr_debug("PCI: PHB IO resource = %016llx-%016llx [%lx]\n", (unsigned long long)res->start, @@ -1550,7 +1558,7 @@ void __devinit pcibios_setup_phb_resources(struct pci_controller *hose) res->flags = IORESOURCE_MEM; } - bus->resource[i+1] = res; + pci_add_resource(resources, res); pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n", i, (unsigned long long)res->start, @@ -1573,34 +1581,27 @@ struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus) static void __devinit pcibios_scan_phb(struct pci_controller *hose) { + LIST_HEAD(resources); struct pci_bus *bus; struct device_node *node = hose->dn; - unsigned long io_offset; - struct resource *res = &hose->io_resource; pr_debug("PCI: Scanning PHB %s\n", node ? node->full_name : "<NO NAME>"); - /* Create an empty bus for the toplevel */ - bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose); + pcibios_setup_phb_resources(hose, &resources); + + bus = pci_scan_root_bus(hose->parent, hose->first_busno, + hose->ops, hose, &resources); if (bus == NULL) { printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", hose->global_number); + pci_free_resource_list(&resources); return; } bus->secondary = hose->first_busno; hose->bus = bus; - /* Fixup IO space offset */ - io_offset = (unsigned long)hose->io_base_virt - isa_io_base; - res->start = (res->start + io_offset) & 0xffffffffu; - res->end = (res->end + io_offset) & 0xffffffffu; - - /* Wire up PHB bus resources */ - pcibios_setup_phb_resources(hose); - - /* Scan children */ - hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); + hose->last_busno = bus->subordinate; } static int __init pcibios_init(void) @@ -1614,8 +1615,6 @@ static int __init pcibios_init(void) list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { hose->last_busno = 0xff; pcibios_scan_phb(hose); - printk(KERN_INFO "calling pci_bus_add_devices()\n"); - pci_bus_add_devices(hose->bus); if (next_busno <= hose->last_busno) next_busno = hose->last_busno + 1; } diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index d46f1da18a3c..29d92187ff30 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -16,6 +16,7 @@ config MIPS select HAVE_FUNCTION_GRAPH_TRACER select HAVE_KPROBES select HAVE_KRETPROBES + select ARCH_BINFMT_ELF_RANDOMIZE_PIE select RTC_LIB if !MACH_LOONGSON select GENERIC_ATOMIC64 if !64BIT select HAVE_DMA_ATTRS @@ -25,6 +26,9 @@ config MIPS select GENERIC_IRQ_SHOW select HAVE_ARCH_JUMP_LABEL select IRQ_FORCED_THREADING + select HAVE_MEMBLOCK + select HAVE_MEMBLOCK_NODE_MAP + select ARCH_DISCARD_MEMBLOCK menu "Machine selection" @@ -65,7 +69,6 @@ config AR7 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_ZBOOT_UART16550 select ARCH_REQUIRE_GPIOLIB - select GCD select VLYNQ help Support for the Texas Instruments AR7 System-on-a-Chip @@ -2064,9 +2067,6 @@ config ARCH_DISCONTIGMEM_ENABLE or have huge holes in the physical address space for other reasons. See <file:Documentation/vm/numa> for more. -config ARCH_POPULATES_NODE_MAP - def_bool y - config ARCH_SPARSEMEM_ENABLE bool select SPARSEMEM_STATIC @@ -2317,6 +2317,7 @@ config PCI bool "Support for PCI controller" depends on HW_HAS_PCI select PCI_DOMAINS + select GENERIC_PCI_IOMAP help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside @@ -2369,10 +2370,6 @@ config TC Linux driver support status is documented at: <http://www.linux-mips.org/wiki/DECstation> -#config ACCESSBUS -# bool "Access.Bus support" -# depends on TC - config MMU bool default y diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index 40b223b603be..c22385400fc9 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -834,10 +834,13 @@ static struct mtd_partition mtd_partitions[] = { } }; +static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL }; + static struct physmap_flash_data flash_data = { .width = 2, .nr_parts = ARRAY_SIZE(mtd_partitions), .parts = mtd_partitions, + .part_probe_types = bcm63xx_part_types, }; static struct resource mtd_resources[] = { diff --git a/arch/mips/include/asm/ip32/mace.h b/arch/mips/include/asm/ip32/mace.h index d08d7c672139..c523123df380 100644 --- a/arch/mips/include/asm/ip32/mace.h +++ b/arch/mips/include/asm/ip32/mace.h @@ -95,7 +95,7 @@ struct mace_video { * Ethernet interface */ struct mace_ethernet { - volatile unsigned long mac_ctrl; + volatile u64 mac_ctrl; volatile unsigned long int_stat; volatile unsigned long dma_ctrl; volatile unsigned long timer; diff --git a/arch/mips/include/asm/ipcbuf.h b/arch/mips/include/asm/ipcbuf.h index d47d08f264e7..84c7e51cb6d0 100644 --- a/arch/mips/include/asm/ipcbuf.h +++ b/arch/mips/include/asm/ipcbuf.h @@ -1,28 +1 @@ -#ifndef _ASM_IPCBUF_H -#define _ASM_IPCBUF_H - -/* - * The ipc64_perm structure for alpha architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit seq - * - 2 miscellaneous 64-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid_t uid; - __kernel_gid_t gid; - __kernel_uid_t cuid; - __kernel_gid_t cgid; - __kernel_mode_t mode; - unsigned short seq; - unsigned short __pad1; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _ASM_IPCBUF_H */ +#include <asm-generic/ipcbuf.h> diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h index ed72e6a26b73..1e6b587f62c9 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h @@ -16,7 +16,6 @@ #define TAGINFO1_LEN 30 /* Length of vendor information field1 in tag */ #define FLASHLAYOUTVER_LEN 4 /* Length of Flash Layout Version String tag */ #define TAGINFO2_LEN 16 /* Length of vendor information field2 in tag */ -#define CRC_LEN 4 /* Length of CRC in bytes */ #define ALTTAGINFO_LEN 54 /* Alternate length for vendor information; Pirelli */ #define NUM_PIRELLI 2 @@ -77,19 +76,19 @@ struct bcm_tag { /* 192-195: Version flash layout */ char flash_layout_ver[FLASHLAYOUTVER_LEN]; /* 196-199: kernel+rootfs CRC32 */ - char fskernel_crc[CRC_LEN]; + __u32 fskernel_crc; /* 200-215: Unused except on Alice Gate where is is information */ char information2[TAGINFO2_LEN]; /* 216-219: CRC32 of image less imagetag (kernel for Alice Gate) */ - char image_crc[CRC_LEN]; + __u32 image_crc; /* 220-223: CRC32 of rootfs partition */ - char rootfs_crc[CRC_LEN]; + __u32 rootfs_crc; /* 224-227: CRC32 of kernel partition */ - char kernel_crc[CRC_LEN]; + __u32 kernel_crc; /* 228-235: Unused at present */ char reserved1[8]; /* 236-239: CRC32 of header excluding last 20 bytes */ - char header_crc[CRC_LEN]; + __u32 header_crc; /* 240-255: Unused at present */ char reserved2[16]; }; diff --git a/arch/mips/include/asm/socket.h b/arch/mips/include/asm/socket.h index 9de5190f2487..ad5c0a7a02a7 100644 --- a/arch/mips/include/asm/socket.h +++ b/arch/mips/include/asm/socket.h @@ -82,6 +82,9 @@ To add: #define SO_REUSEPORT 0x0200 /* Allow local address and port reuse. */ #define SO_RXQ_OVFL 40 +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS + #ifdef __KERNEL__ /** sock_type - Socket types diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index 97f8bf6639e7..0d85d8e440c5 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -117,7 +117,6 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ -#define TIF_FREEZE 19 #define TIF_FIXADE 20 /* Fix address errors in software */ #define TIF_LOGADE 21 /* Log address errors to syslog */ #define TIF_32BIT_REGS 22 /* also implies 16/32 fprs */ @@ -141,7 +140,6 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) #define _TIF_USEDFPU (1<<TIF_USEDFPU) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) -#define _TIF_FREEZE (1<<TIF_FREEZE) #define _TIF_FIXADE (1<<TIF_FIXADE) #define _TIF_LOGADE (1<<TIF_LOGADE) #define _TIF_32BIT_REGS (1<<TIF_32BIT_REGS) diff --git a/arch/mips/include/asm/types.h b/arch/mips/include/asm/types.h index 533812b61881..43bf70ebd3a2 100644 --- a/arch/mips/include/asm/types.h +++ b/arch/mips/include/asm/types.h @@ -21,12 +21,6 @@ # include <asm-generic/int-ll64.h> #endif -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - /* * These aren't exported outside the kernel to avoid name space clashes */ diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c index 4f2971bcf8e5..315fc0b250f8 100644 --- a/arch/mips/kernel/perf_event_mipsxx.c +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -623,7 +623,7 @@ static int mipspmu_event_init(struct perf_event *event) if (!atomic_inc_not_zero(&active_events)) { if (atomic_read(&active_events) > MIPS_MAX_HWEVENTS) { atomic_dec(&active_events); - return -ENOSPC; + return -EINVAL; } mutex_lock(&pmu_reserve_mutex); @@ -732,15 +732,15 @@ static int validate_group(struct perf_event *event) memset(&fake_cpuc, 0, sizeof(fake_cpuc)); if (!validate_event(&fake_cpuc, leader)) - return -ENOSPC; + return -EINVAL; list_for_each_entry(sibling, &leader->sibling_list, group_entry) { if (!validate_event(&fake_cpuc, sibling)) - return -ENOSPC; + return -EINVAL; } if (!validate_event(&fake_cpuc, event)) - return -ENOSPC; + return -EINVAL; return 0; } diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index c47f96e453c0..7955409051c4 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -56,7 +56,8 @@ void __noreturn cpu_idle(void) /* endless idle loop with no priority at all */ while (1) { - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); + rcu_idle_enter(); while (!need_resched() && cpu_online(cpu)) { #ifdef CONFIG_MIPS_MT_SMTC extern void smtc_idle_loop_hook(void); @@ -77,7 +78,8 @@ void __noreturn cpu_idle(void) system_state == SYSTEM_BOOTING)) play_dead(); #endif - tick_nohz_restart_sched_tick(); + rcu_idle_exit(); + tick_nohz_idle_exit(); preempt_enable_no_resched(); schedule(); preempt_disable(); diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 84af26ab2212..b1cb8f87d7b4 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -14,6 +14,7 @@ #include <linux/ioport.h> #include <linux/export.h> #include <linux/screen_info.h> +#include <linux/memblock.h> #include <linux/bootmem.h> #include <linux/initrd.h> #include <linux/root_dev.h> @@ -352,7 +353,7 @@ static void __init bootmem_init(void) continue; #endif - add_active_range(0, start, end); + memblock_add_node(PFN_PHYS(start), PFN_PHYS(end - start), 0); } /* diff --git a/arch/mips/lib/iomap-pci.c b/arch/mips/lib/iomap-pci.c index 2ab899c4b4ce..2635b1a96333 100644 --- a/arch/mips/lib/iomap-pci.c +++ b/arch/mips/lib/iomap-pci.c @@ -40,32 +40,6 @@ static void __iomem *ioport_map_pci(struct pci_dev *dev, return (void __iomem *) (ctrl->io_map_base + port); } -/* - * Create a virtual mapping cookie for a PCI BAR (memory or IO) - */ -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (!len || !start) - return NULL; - if (maxlen && len > maxlen) - len = maxlen; - if (flags & IORESOURCE_IO) - return ioport_map_pci(dev, start, len); - if (flags & IORESOURCE_MEM) { - if (flags & IORESOURCE_CACHEABLE) - return ioremap(start, len); - return ioremap_nocache(start, len); - } - /* What? */ - return NULL; -} - -EXPORT_SYMBOL(pci_iomap); - void pci_iounmap(struct pci_dev *dev, void __iomem * addr) { iounmap(addr); diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 41af7fa2887b..fa8e378413b1 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -81,6 +81,7 @@ static void __devinit pcibios_scanbus(struct pci_controller *hose) { static int next_busno; static int need_domain_info; + LIST_HEAD(resources); struct pci_bus *bus; if (!hose->iommu) @@ -89,7 +90,13 @@ static void __devinit pcibios_scanbus(struct pci_controller *hose) if (hose->get_busno && pci_probe_only) next_busno = (*hose->get_busno)(); - bus = pci_scan_bus(next_busno, hose->pci_ops, hose); + pci_add_resource(&resources, hose->mem_resource); + pci_add_resource(&resources, hose->io_resource); + bus = pci_scan_root_bus(NULL, next_busno, hose->pci_ops, hose, + &resources); + if (!bus) + pci_free_resource_list(&resources); + hose->bus = bus; need_domain_info = need_domain_info || hose->index; @@ -205,27 +212,6 @@ static int pcibios_enable_resources(struct pci_dev *dev, int mask) return 0; } -/* - * If we set up a device for bus mastering, we need to check the latency - * timer as certain crappy BIOSes forget to set it properly. - */ -static unsigned int pcibios_max_latency = 255; - -void pcibios_set_master(struct pci_dev *dev) -{ - u8 lat; - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - else - return; - printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", - pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} - unsigned int pcibios_assign_all_busses(void) { return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0; @@ -266,15 +252,11 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) { /* Propagate hose info into the subordinate devices. */ - struct pci_controller *hose = bus->sysdata; struct list_head *ln; struct pci_dev *dev = bus->self; - if (!dev) { - bus->resource[0] = hose->io_resource; - bus->resource[1] = hose->mem_resource; - } else if (pci_probe_only && - (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { + if (pci_probe_only && dev && + (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { pci_read_bridge_bases(bus); pcibios_fixup_device_resources(dev, bus); } diff --git a/arch/mips/sgi-ip27/Kconfig b/arch/mips/sgi-ip27/Kconfig index bc5e9769bb73..4b2ea282b9c7 100644 --- a/arch/mips/sgi-ip27/Kconfig +++ b/arch/mips/sgi-ip27/Kconfig @@ -1,9 +1,3 @@ -#config SGI_SN0_XXL -# bool "IP27 XXL" -# depends on SGI_IP27 -# This options adds support for userspace processes up to 16TB size. -# Normally the limit is just .5TB. - choice prompt "Node addressing mode" depends on SGI_IP27 diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index bc1297109cc5..b105eca3c020 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -12,6 +12,7 @@ */ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/memblock.h> #include <linux/mm.h> #include <linux/mmzone.h> #include <linux/module.h> @@ -381,8 +382,8 @@ static void __init szmem(void) continue; } num_physpages += slot_psize; - add_active_range(node, slot_getbasepfn(node, slot), - slot_getbasepfn(node, slot) + slot_psize); + memblock_add_node(PFN_PHYS(slot_getbasepfn(node, slot)), + PFN_PHYS(slot_psize), node); } } } diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig index 3e639bda43f7..3cd937e0e9a3 100644 --- a/arch/mips/sibyte/Kconfig +++ b/arch/mips/sibyte/Kconfig @@ -71,7 +71,6 @@ config SIBYTE_SB1xxx_SOC bool select DMA_COHERENT select IRQ_CPU - select SIBYTE_CFE select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL diff --git a/arch/mips/txx9/generic/7segled.c b/arch/mips/txx9/generic/7segled.c index 7f8416f86222..8e93b2122524 100644 --- a/arch/mips/txx9/generic/7segled.c +++ b/arch/mips/txx9/generic/7segled.c @@ -9,7 +9,7 @@ * (C) Copyright TOSHIBA CORPORATION 2005-2007 * All Rights Reserved. */ -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/slab.h> #include <linux/map_to_7segment.h> #include <asm/txx9/generic.h> @@ -37,8 +37,8 @@ int txx9_7segled_putc(unsigned int pos, char c) return 0; } -static ssize_t ascii_store(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t ascii_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) { unsigned int ch = dev->id; @@ -46,8 +46,8 @@ static ssize_t ascii_store(struct sys_device *dev, return size; } -static ssize_t raw_store(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t raw_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) { unsigned int ch = dev->id; @@ -55,19 +55,19 @@ static ssize_t raw_store(struct sys_device *dev, return size; } -static SYSDEV_ATTR(ascii, 0200, NULL, ascii_store); -static SYSDEV_ATTR(raw, 0200, NULL, raw_store); +static DEVICE_ATTR(ascii, 0200, NULL, ascii_store); +static DEVICE_ATTR(raw, 0200, NULL, raw_store); -static ssize_t map_seg7_show(struct sysdev_class *class, - struct sysdev_class_attribute *attr, +static ssize_t map_seg7_show(struct device *dev, + struct device_attribute *attr, char *buf) { memcpy(buf, &txx9_seg7map, sizeof(txx9_seg7map)); return sizeof(txx9_seg7map); } -static ssize_t map_seg7_store(struct sysdev_class *class, - struct sysdev_class_attribute *attr, +static ssize_t map_seg7_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) { if (size != sizeof(txx9_seg7map)) @@ -76,10 +76,11 @@ static ssize_t map_seg7_store(struct sysdev_class *class, return size; } -static SYSDEV_CLASS_ATTR(map_seg7, 0600, map_seg7_show, map_seg7_store); +static DEVICE_ATTR(map_seg7, 0600, map_seg7_show, map_seg7_store); -static struct sysdev_class tx_7segled_sysdev_class = { - .name = "7segled", +static struct bus_type tx_7segled_subsys = { + .name = "7segled", + .dev_name = "7segled", }; static int __init tx_7segled_init_sysfs(void) @@ -87,26 +88,25 @@ static int __init tx_7segled_init_sysfs(void) int error, i; if (!tx_7segled_num) return -ENODEV; - error = sysdev_class_register(&tx_7segled_sysdev_class); + error = subsys_system_register(&tx_7segled_subsys, NULL); if (error) return error; - error = sysdev_class_create_file(&tx_7segled_sysdev_class, - &attr_map_seg7); + error = device_create_file(tx_7segled_subsys.dev_root, &dev_attr_map_seg7); if (error) return error; for (i = 0; i < tx_7segled_num; i++) { - struct sys_device *dev; + struct device *dev; dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) { error = -ENODEV; break; } dev->id = i; - dev->cls = &tx_7segled_sysdev_class; - error = sysdev_register(dev); + dev->dev = &tx_7segled_subsys; + error = device_register(dev); if (!error) { - sysdev_create_file(dev, &attr_ascii); - sysdev_create_file(dev, &attr_raw); + device_create_file(dev, &dev_attr_ascii); + device_create_file(dev, &dev_attr_raw); } } return error; diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index ec38e00b2559..ae77a7916c03 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -22,7 +22,7 @@ #include <linux/serial_core.h> #include <linux/mtd/physmap.h> #include <linux/leds.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/slab.h> #include <linux/irq.h> #include <asm/bootinfo.h> @@ -897,10 +897,13 @@ void __init txx9_aclc_init(unsigned long baseaddr, int irq, #endif } -static struct sysdev_class txx9_sramc_sysdev_class; +static struct bus_type txx9_sramc_subsys = { + .name = "txx9_sram", + .dev_name = "txx9_sram", +}; -struct txx9_sramc_sysdev { - struct sys_device dev; +struct txx9_sramc_dev { + struct device dev; struct bin_attribute bindata_attr; void __iomem *base; }; @@ -909,7 +912,7 @@ static ssize_t txx9_sram_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t pos, size_t size) { - struct txx9_sramc_sysdev *dev = bin_attr->private; + struct txx9_sramc_dev *dev = bin_attr->private; size_t ramsize = bin_attr->size; if (pos >= ramsize) @@ -924,7 +927,7 @@ static ssize_t txx9_sram_write(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t pos, size_t size) { - struct txx9_sramc_sysdev *dev = bin_attr->private; + struct txx9_sramc_dev *dev = bin_attr->private; size_t ramsize = bin_attr->size; if (pos >= ramsize) @@ -937,18 +940,13 @@ static ssize_t txx9_sram_write(struct file *filp, struct kobject *kobj, void __init txx9_sramc_init(struct resource *r) { - struct txx9_sramc_sysdev *dev; + struct txx9_sramc_dev *dev; size_t size; int err; - if (!txx9_sramc_sysdev_class.name) { - txx9_sramc_sysdev_class.name = "txx9_sram"; - err = sysdev_class_register(&txx9_sramc_sysdev_class); - if (err) { - txx9_sramc_sysdev_class.name = NULL; - return; - } - } + err = subsys_system_register(&txx9_sramc_subsys, NULL); + if (err) + return; dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) return; @@ -956,7 +954,7 @@ void __init txx9_sramc_init(struct resource *r) dev->base = ioremap(r->start, size); if (!dev->base) goto exit; - dev->dev.cls = &txx9_sramc_sysdev_class; + dev->dev.bus = &txx9_sramc_subsys; sysfs_bin_attr_init(&dev->bindata_attr); dev->bindata_attr.attr.name = "bindata"; dev->bindata_attr.attr.mode = S_IRUSR | S_IWUSR; @@ -964,12 +962,12 @@ void __init txx9_sramc_init(struct resource *r) dev->bindata_attr.write = txx9_sram_write; dev->bindata_attr.size = size; dev->bindata_attr.private = dev; - err = sysdev_register(&dev->dev); + err = device_register(&dev->dev); if (err) goto exit; err = sysfs_create_bin_file(&dev->dev.kobj, &dev->bindata_attr); if (err) { - sysdev_unregister(&dev->dev); + device_unregister(&dev->dev); goto exit; } return; diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c index ba3cec3155df..6567895d1f59 100644 --- a/arch/mips/txx9/generic/setup_tx4939.c +++ b/arch/mips/txx9/generic/setup_tx4939.c @@ -15,7 +15,7 @@ #include <linux/delay.h> #include <linux/netdevice.h> #include <linux/notifier.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/ethtool.h> #include <linux/param.h> #include <linux/ptrace.h> diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 438db84a1f7c..8f1c40d5817e 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -252,6 +252,7 @@ config PCI bool "Use PCI" depends on MN10300_UNIT_ASB2305 default y + select GENERIC_PCI_IOMAP help Some systems (such as the ASB2305) have PCI onboard. If you have one of these boards and you wish to use the PCI facilities, say Y here. diff --git a/arch/mn10300/include/asm/io.h b/arch/mn10300/include/asm/io.h index 787255da744e..139df8c53de8 100644 --- a/arch/mn10300/include/asm/io.h +++ b/arch/mn10300/include/asm/io.h @@ -229,7 +229,6 @@ static inline void outsl(unsigned long addr, const void *buffer, int count) /* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ struct pci_dev; -extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p) { } @@ -251,15 +250,15 @@ static inline void *phys_to_virt(unsigned long address) /* * Change "struct page" to physical address. */ -static inline void *__ioremap(unsigned long offset, unsigned long size, - unsigned long flags) +static inline void __iomem *__ioremap(unsigned long offset, unsigned long size, + unsigned long flags) { - return (void *) offset; + return (void __iomem *) offset; } -static inline void *ioremap(unsigned long offset, unsigned long size) +static inline void __iomem *ioremap(unsigned long offset, unsigned long size) { - return (void *) offset; + return (void __iomem *) offset; } /* @@ -267,14 +266,14 @@ static inline void *ioremap(unsigned long offset, unsigned long size) * area. it's useful if some control registers are in such an area and write * combining or read caching is not desirable: */ -static inline void *ioremap_nocache(unsigned long offset, unsigned long size) +static inline void __iomem *ioremap_nocache(unsigned long offset, unsigned long size) { - return (void *) (offset | 0x20000000); + return (void __iomem *) (offset | 0x20000000); } #define ioremap_wc ioremap_nocache -static inline void iounmap(void *addr) +static inline void iounmap(void __iomem *addr) { } diff --git a/arch/mn10300/include/asm/ipcbuf.h b/arch/mn10300/include/asm/ipcbuf.h index f6f63d448272..84c7e51cb6d0 100644 --- a/arch/mn10300/include/asm/ipcbuf.h +++ b/arch/mn10300/include/asm/ipcbuf.h @@ -1,29 +1 @@ -#ifndef _ASM_IPCBUF_H -#define _ASM_IPCBUF_H - -/* - * The ipc64_perm structure for MN10300 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _ASM_IPCBUF_H */ +#include <asm-generic/ipcbuf.h> diff --git a/arch/mn10300/include/asm/socket.h b/arch/mn10300/include/asm/socket.h index 4e60c4281288..876356d78522 100644 --- a/arch/mn10300/include/asm/socket.h +++ b/arch/mn10300/include/asm/socket.h @@ -62,4 +62,7 @@ #define SO_RXQ_OVFL 40 +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS + #endif /* _ASM_SOCKET_H */ diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h index 87c213002d4c..28cf52100baa 100644 --- a/arch/mn10300/include/asm/thread_info.h +++ b/arch/mn10300/include/asm/thread_info.h @@ -165,7 +165,6 @@ extern void free_thread_info(struct thread_info *); #define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ #define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 17 /* is terminating due to OOM killer */ -#define TIF_FREEZE 18 /* freezing for suspend */ #define _TIF_SYSCALL_TRACE +(1 << TIF_SYSCALL_TRACE) #define _TIF_NOTIFY_RESUME +(1 << TIF_NOTIFY_RESUME) @@ -174,7 +173,6 @@ extern void free_thread_info(struct thread_info *); #define _TIF_SINGLESTEP +(1 << TIF_SINGLESTEP) #define _TIF_RESTORE_SIGMASK +(1 << TIF_RESTORE_SIGMASK) #define _TIF_POLLING_NRFLAG +(1 << TIF_POLLING_NRFLAG) -#define _TIF_FREEZE +(1 << TIF_FREEZE) #define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ #define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */ diff --git a/arch/mn10300/include/asm/types.h b/arch/mn10300/include/asm/types.h index c1833eb192e3..713d4ba108a5 100644 --- a/arch/mn10300/include/asm/types.h +++ b/arch/mn10300/include/asm/types.h @@ -13,12 +13,6 @@ #include <asm-generic/int-ll64.h> -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - /* * These aren't exported outside the kernel to avoid name space clashes */ diff --git a/arch/mn10300/unit-asb2305/Makefile b/arch/mn10300/unit-asb2305/Makefile index 0551022225b3..cbc5abaa939a 100644 --- a/arch/mn10300/unit-asb2305/Makefile +++ b/arch/mn10300/unit-asb2305/Makefile @@ -5,4 +5,4 @@ ############################################################################### obj-y := unit-init.o leds.o -obj-$(CONFIG_PCI) += pci.o pci-asb2305.o pci-irq.o pci-iomap.o +obj-$(CONFIG_PCI) += pci.o pci-asb2305.o pci-irq.o diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c index 8e6763e6f250..c4e2e79281e8 100644 --- a/arch/mn10300/unit-asb2305/pci-asb2305.c +++ b/arch/mn10300/unit-asb2305/pci-asb2305.c @@ -213,28 +213,6 @@ void __init pcibios_resource_survey(void) pcibios_allocate_resources(1); } -/* - * If we set up a device for bus mastering, we need to check the latency - * timer as certain crappy BIOSes forget to set it properly. - */ -unsigned int pcibios_max_latency = 255; - -void pcibios_set_master(struct pci_dev *dev) -{ - u8 lat; - - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - else - return; - - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} - int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.h b/arch/mn10300/unit-asb2305/pci-asb2305.h index c3fa294b6e28..1194fe486b01 100644 --- a/arch/mn10300/unit-asb2305/pci-asb2305.h +++ b/arch/mn10300/unit-asb2305/pci-asb2305.h @@ -31,8 +31,6 @@ extern unsigned int pci_probe; /* pci-asb2305.c */ -extern unsigned int pcibios_max_latency; - extern void pcibios_resource_survey(void); /* pci.c */ diff --git a/arch/mn10300/unit-asb2305/pci-iomap.c b/arch/mn10300/unit-asb2305/pci-iomap.c deleted file mode 100644 index c1a8d8f941fd..000000000000 --- a/arch/mn10300/unit-asb2305/pci-iomap.c +++ /dev/null @@ -1,31 +0,0 @@ -/* ASB2305 PCI I/O mapping handler - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include <linux/pci.h> -#include <linux/module.h> - -/* - * Create a virtual mapping cookie for a PCI BAR (memory or IO) - */ -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (!len || !start) - return NULL; - - if ((flags & IORESOURCE_IO) || (flags & IORESOURCE_MEM)) - return (void __iomem *) start; - - return NULL; -} -EXPORT_SYMBOL(pci_iomap); diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c index a4954fe82094..a7c5f08ca9f5 100644 --- a/arch/mn10300/unit-asb2305/pci.c +++ b/arch/mn10300/unit-asb2305/pci.c @@ -380,11 +380,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) { struct pci_dev *dev; - if (bus->number == 0) { - bus->resource[0] = &pci_ioport_resource; - bus->resource[1] = &pci_iomem_resource; - } - if (bus->self) { pci_read_bridge_bases(bus); pcibios_fixup_device_resources(bus->self); @@ -402,6 +397,8 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) */ static int __init pcibios_init(void) { + LIST_HEAD(resources); + ioport_resource.start = 0xA0000000; ioport_resource.end = 0xDFFFFFFF; iomem_resource.start = 0xA0000000; @@ -423,7 +420,10 @@ static int __init pcibios_init(void) printk(KERN_INFO "PCI: Probing PCI hardware [mempage %08x]\n", MEM_PAGING_REG); - pci_root_bus = pci_scan_bus(0, &pci_direct_ampci, NULL); + pci_add_resource(&resources, &pci_ioport_resource); + pci_add_resource(&resources, &pci_iomem_resource); + pci_root_bus = pci_scan_root_bus(NULL, 0, &pci_direct_ampci, NULL, + &resources); pcibios_irq_init(); pcibios_fixup_irqs(); diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig index e518a5a4cf4c..bc428b5f126c 100644 --- a/arch/openrisc/Kconfig +++ b/arch/openrisc/Kconfig @@ -15,6 +15,7 @@ config OPENRISC select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW select GENERIC_IOMAP + select GENERIC_CPU_DEVICES config MMU def_bool y @@ -38,9 +39,6 @@ config RWSEM_XCHGADD_ALGORITHM config GENERIC_HWEIGHT def_bool y -config GENERIC_IOMAP - def_bool y - config NO_IOPORT def_bool y diff --git a/arch/openrisc/include/asm/memblock.h b/arch/openrisc/include/asm/memblock.h deleted file mode 100644 index bbe5a1c788cb..000000000000 --- a/arch/openrisc/include/asm/memblock.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * OpenRISC Linux - * - * Linux architectural port borrowing liberally from similar works of - * others. All original copyrights apply as per the original source - * declaration. - * - * OpenRISC implementation: - * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com> - * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se> - * et al. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __ASM_OPENRISC_MEMBLOCK_H -#define __ASM_OPENRISC_MEMBLOCK_H - -/* empty */ - -#endif /* __ASM_OPENRISC_MEMBLOCK_H */ diff --git a/arch/openrisc/kernel/idle.c b/arch/openrisc/kernel/idle.c index d5bc5f813e89..e5fc78877830 100644 --- a/arch/openrisc/kernel/idle.c +++ b/arch/openrisc/kernel/idle.c @@ -51,7 +51,8 @@ void cpu_idle(void) /* endless idle loop with no priority at all */ while (1) { - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); + rcu_idle_enter(); while (!need_resched()) { check_pgt_cache(); @@ -69,7 +70,8 @@ void cpu_idle(void) set_thread_flag(TIF_POLLING_NRFLAG); } - tick_nohz_restart_sched_tick(); + rcu_idle_exit(); + tick_nohz_idle_exit(); preempt_enable_no_resched(); schedule(); preempt_disable(); diff --git a/arch/openrisc/kernel/prom.c b/arch/openrisc/kernel/prom.c index 1bb58ba89afa..3d4478f6c942 100644 --- a/arch/openrisc/kernel/prom.c +++ b/arch/openrisc/kernel/prom.c @@ -76,14 +76,13 @@ void __init early_init_devtree(void *params) of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line); /* Scan memory nodes and rebuild MEMBLOCKs */ - memblock_init(); of_scan_flat_dt(early_init_dt_scan_root, NULL); of_scan_flat_dt(early_init_dt_scan_memory, NULL); /* Save command line for /proc/cmdline and then parse parameters */ strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE); - memblock_analyze(); + memblock_allow_resize(); /* We must copy the flattend device tree from init memory to regular * memory because the device tree references the strings in it diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index fdfd8be29e95..242a1b7ac759 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -14,6 +14,7 @@ config PARISC select GENERIC_ATOMIC64 if !64BIT select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_PROBE + select GENERIC_PCI_IOMAP select IRQ_PER_CPU select ARCH_HAVE_NMI_SAFE_CMPXCHG diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c index 6ab9580b0b00..d9dc6cd3b7d2 100644 --- a/arch/parisc/hpux/sys_hpux.c +++ b/arch/parisc/hpux/sys_hpux.c @@ -136,16 +136,9 @@ struct hpux_ustat { */ static int hpux_ustat(dev_t dev, struct hpux_ustat __user *ubuf) { - struct super_block *s; struct hpux_ustat tmp; /* Changed to hpux_ustat */ struct kstatfs sbuf; - int err = -EINVAL; - - s = user_get_super(dev); - if (s == NULL) - goto out; - err = statfs_by_dentry(s->s_root, &sbuf); - drop_super(s); + int err = vfs_ustat(dev, &sbuf); if (err) goto out; diff --git a/arch/parisc/include/asm/socket.h b/arch/parisc/include/asm/socket.h index 225b7d6a1a0a..d28c51b61067 100644 --- a/arch/parisc/include/asm/socket.h +++ b/arch/parisc/include/asm/socket.h @@ -61,6 +61,9 @@ #define SO_RXQ_OVFL 0x4021 +#define SO_WIFI_STATUS 0x4022 +#define SCM_WIFI_STATUS SO_WIFI_STATUS + /* O_NONBLOCK clashes with the bits used for socket types. Therefore we * have to define SOCK_NONBLOCK to a different value here. */ diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h index aa8de727e90b..6d9c7c7973d0 100644 --- a/arch/parisc/include/asm/thread_info.h +++ b/arch/parisc/include/asm/thread_info.h @@ -58,7 +58,6 @@ struct thread_info { #define TIF_32BIT 4 /* 32 bit binary */ #define TIF_MEMDIE 5 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 6 /* restore saved signal mask */ -#define TIF_FREEZE 7 /* is freezing for suspend */ #define TIF_NOTIFY_RESUME 8 /* callback before returning to user */ #define TIF_SINGLESTEP 9 /* single stepping? */ #define TIF_BLOCKSTEP 10 /* branch stepping? */ @@ -69,7 +68,6 @@ struct thread_info { #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_32BIT (1 << TIF_32BIT) #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) -#define _TIF_FREEZE (1 << TIF_FREEZE) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) #define _TIF_BLOCKSTEP (1 << TIF_BLOCKSTEP) diff --git a/arch/parisc/include/asm/types.h b/arch/parisc/include/asm/types.h index 80e415c9936d..8866f9bbdeaf 100644 --- a/arch/parisc/include/asm/types.h +++ b/arch/parisc/include/asm/types.h @@ -3,10 +3,4 @@ #include <asm-generic/int-ll64.h> -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - #endif diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index 45b7389d77aa..7c0774397b89 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -198,8 +198,6 @@ static struct clocksource clocksource_cr16 = { .rating = 300, .read = read_cr16, .mask = CLOCKSOURCE_MASK(BITS_PER_LONG), - .mult = 0, /* to be set */ - .shift = 22, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -270,7 +268,5 @@ void __init time_init(void) /* register at clocksource framework */ current_cr16_khz = PAGE0->mem_10msec/10; /* kHz */ - clocksource_cr16.mult = clocksource_khz2mult(current_cr16_khz, - clocksource_cr16.shift); - clocksource_register(&clocksource_cr16); + clocksource_register_khz(&clocksource_cr16, current_cr16_khz); } diff --git a/arch/parisc/lib/iomap.c b/arch/parisc/lib/iomap.c index 8f470c93b16d..fb8e10a4fb39 100644 --- a/arch/parisc/lib/iomap.c +++ b/arch/parisc/lib/iomap.c @@ -436,28 +436,6 @@ void ioport_unmap(void __iomem *addr) } } -/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (!len || !start) - return NULL; - if (maxlen && len > maxlen) - len = maxlen; - if (flags & IORESOURCE_IO) - return ioport_map(start, len); - if (flags & IORESOURCE_MEM) { - if (flags & IORESOURCE_CACHEABLE) - return ioremap(start, len); - return ioremap_nocache(start, len); - } - /* What? */ - return NULL; -} - void pci_iounmap(struct pci_dev *dev, void __iomem * addr) { if (!INDIRECT_ADDR(addr)) { @@ -483,5 +461,4 @@ EXPORT_SYMBOL(iowrite16_rep); EXPORT_SYMBOL(iowrite32_rep); EXPORT_SYMBOL(ioport_map); EXPORT_SYMBOL(ioport_unmap); -EXPORT_SYMBOL(pci_iomap); EXPORT_SYMBOL(pci_iounmap); diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 951e18f5335b..1919634a9b32 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -87,6 +87,10 @@ config ARCH_HAS_ILOG2_U64 bool default y if 64BIT +config ARCH_HAS_CPU_IDLE_WAIT + bool + default y + config GENERIC_HWEIGHT bool default y @@ -117,6 +121,7 @@ config PPC select HAVE_KRETPROBES select HAVE_ARCH_TRACEHOOK select HAVE_MEMBLOCK + select HAVE_MEMBLOCK_NODE_MAP select HAVE_DMA_ATTRS select HAVE_DMA_API_DEBUG select USE_GENERIC_SMP_HELPERS if SMP @@ -132,6 +137,7 @@ config PPC select IRQ_PER_CPU select GENERIC_IRQ_SHOW select GENERIC_IRQ_SHOW_LEVEL + select IRQ_FORCED_THREADING select HAVE_RCU_TABLE_FREE if SMP select HAVE_SYSCALL_TRACEPOINTS select HAVE_BPF_JIT if (PPC64 && NET) @@ -362,8 +368,9 @@ config KEXEC config CRASH_DUMP bool "Build a kdump crash kernel" - depends on PPC64 || 6xx || FSL_BOOKE - select RELOCATABLE if PPC64 || FSL_BOOKE + depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP && !PPC_47x) + select RELOCATABLE if PPC64 || 44x + select DYNAMIC_MEMSTART if FSL_BOOKE help Build a kernel suitable for use as a kdump capture kernel. The same kernel binary can be used as production kernel and dump @@ -421,9 +428,6 @@ config ARCH_SPARSEMEM_DEFAULT def_bool y depends on (SMP && PPC_PSERIES) || PPC_PS3 -config ARCH_POPULATES_NODE_MAP - def_bool y - config SYS_SUPPORTS_HUGETLBFS bool @@ -687,6 +691,10 @@ config FSL_LBC controller. Also contains some common code used by drivers for specific local bus peripherals. +config FSL_IFC + bool + depends on FSL_SOC + config FSL_GTM bool depends on PPC_83xx || QUICC_ENGINE || CPM2 @@ -710,6 +718,7 @@ config PCI default PCI_PERMEDIA if !4xx && !CPM2 && !8xx default PCI_QSPAN if !4xx && !CPM2 && 8xx select ARCH_SUPPORTS_MSI + select GENERIC_PCI_IOMAP help Find out whether your system includes a PCI bus. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside @@ -772,6 +781,10 @@ source "drivers/rapidio/Kconfig" endmenu +config NONSTATIC_KERNEL + bool + default n + menu "Advanced setup" depends on PPC32 @@ -821,13 +834,32 @@ config LOWMEM_CAM_NUM int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL default 3 +config DYNAMIC_MEMSTART + bool "Enable page aligned dynamic load address for kernel (EXPERIMENTAL)" + depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || 44x) + select NONSTATIC_KERNEL + help + This option enables the kernel to be loaded at any page aligned + physical address. The kernel creates a mapping from KERNELBASE to + the address where the kernel is loaded. The page size here implies + the TLB page size of the mapping for kernel on the particular platform. + Please refer to the init code for finding the TLB page size. + + DYNAMIC_MEMSTART is an easy way of implementing pseudo-RELOCATABLE + kernel image, where the only restriction is the page aligned kernel + load address. When this option is enabled, the compile time physical + address CONFIG_PHYSICAL_START is ignored. + + This option is overridden by CONFIG_RELOCATABLE + config RELOCATABLE bool "Build a relocatable kernel (EXPERIMENTAL)" - depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || PPC_47x) + depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && 44x + select NONSTATIC_KERNEL help This builds a kernel image that is capable of running at the - location the kernel is loaded at (some alignment restrictions may - exist). + location the kernel is loaded at, without any alignment restrictions. + This feature is a superset of DYNAMIC_MEMSTART and hence overrides it. One use is for the kexec on panic case where the recovery kernel must live at a different physical address than the primary @@ -837,7 +869,11 @@ config RELOCATABLE it has been loaded at and the compile time physical addresses CONFIG_PHYSICAL_START is ignored. However CONFIG_PHYSICAL_START setting can still be useful to bootwrappers that need to know the - load location of the kernel (eg. u-boot/mkimage). + load address of the kernel (eg. u-boot/mkimage). + +config RELOCATABLE_PPC32 + def_bool y + depends on PPC32 && RELOCATABLE config PAGE_OFFSET_BOOL bool "Set custom page offset address" @@ -867,7 +903,7 @@ config KERNEL_START_BOOL config KERNEL_START hex "Virtual address of kernel base" if KERNEL_START_BOOL default PAGE_OFFSET if PAGE_OFFSET_BOOL - default "0xc2000000" if CRASH_DUMP && !RELOCATABLE + default "0xc2000000" if CRASH_DUMP && !NONSTATIC_KERNEL default "0xc0000000" config PHYSICAL_START_BOOL @@ -880,7 +916,7 @@ config PHYSICAL_START_BOOL config PHYSICAL_START hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL - default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !RELOCATABLE + default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !NONSTATIC_KERNEL default "0x00000000" config PHYSICAL_ALIGN @@ -926,6 +962,7 @@ endmenu if PPC64 config RELOCATABLE bool "Build a relocatable kernel" + select NONSTATIC_KERNEL help This builds a kernel image that is capable of running anywhere in the RMA (real memory area) at any 16k-aligned base address. diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 1b8a9c905cf7..4ccb2a009f74 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -336,4 +336,16 @@ config PPC_EARLY_DEBUG_CPM_ADDR platform probing is done, all platforms selected must share the same address. +config STRICT_DEVMEM + def_bool y + prompt "Filter access to /dev/mem" + help + This option restricts access to /dev/mem. If this option is + disabled, you allow userspace access to all memory, including + kernel and userspace memory. Accidental memory access is likely + to be disastrous. + Memory access is required for experts who want to debug the kernel. + + If you are unsure, say Y. + endmenu diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 70ba0c0a1223..b8b105c01c64 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -63,9 +63,9 @@ override CC += -m$(CONFIG_WORD_SIZE) override AR := GNUTARGET=elf$(CONFIG_WORD_SIZE)-powerpc $(AR) endif -LDFLAGS_vmlinux-yy := -Bstatic -LDFLAGS_vmlinux-$(CONFIG_PPC64)$(CONFIG_RELOCATABLE) := -pie -LDFLAGS_vmlinux := $(LDFLAGS_vmlinux-yy) +LDFLAGS_vmlinux-y := -Bstatic +LDFLAGS_vmlinux-$(CONFIG_RELOCATABLE) := -pie +LDFLAGS_vmlinux := $(LDFLAGS_vmlinux-y) CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=no -mcall-aixdesc CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple @@ -131,8 +131,7 @@ KBUILD_CFLAGS += -mno-sched-epilog endif cpu-as-$(CONFIG_4xx) += -Wa,-m405 -cpu-as-$(CONFIG_6xx) += -Wa,-maltivec -cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec +cpu-as-$(CONFIG_ALTIVEC) += -Wa,-maltivec cpu-as-$(CONFIG_E500) += -Wa,-me500 cpu-as-$(CONFIG_E200) += -Wa,-me200 @@ -166,7 +165,7 @@ all: zImage # With make 3.82 we cannot mix normal and wildcard targets BOOT_TARGETS1 := zImage zImage.initrd uImage -BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.% +BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.% uImage.% PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2) diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 72ee8c1fba48..15986e70799c 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -45,6 +45,7 @@ $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 +$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405 @@ -79,7 +80,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \ - gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c + gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c \ + treeboot-currituck.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -199,6 +201,7 @@ image-$(CONFIG_EP405) += dtbImage.ep405 image-$(CONFIG_HOTFOOT) += cuImage.hotfoot image-$(CONFIG_WALNUT) += treeImage.walnut image-$(CONFIG_ACADIA) += cuImage.acadia +image-$(CONFIG_OBS600) += uImage.obs600 # Board ports in arch/powerpc/platform/44x/Kconfig image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony @@ -212,6 +215,7 @@ image-$(CONFIG_WARP) += cuImage.warp image-$(CONFIG_YOSEMITE) += cuImage.yosemite image-$(CONFIG_ISS4xx) += treeImage.iss4xx \ treeImage.iss4xx-mpic +image-$(CONFIG_CURRITUCK) += treeImage.currituck # Board ports in arch/powerpc/platform/8xx/Kconfig image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads @@ -316,6 +320,12 @@ $(obj)/zImage.iseries: vmlinux $(obj)/uImage: vmlinux $(wrapperbits) $(call if_changed,wrap,uboot) +$(obj)/uImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) + +$(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb) + $(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h index 645a7c964e5f..cc73f7a95e26 100644 --- a/arch/powerpc/boot/dcr.h +++ b/arch/powerpc/boot/dcr.h @@ -9,6 +9,12 @@ }) #define mtdcr(rn, val) \ asm volatile("mtdcr %0,%1" : : "i"(rn), "r"(val)) +#define mfdcrx(rn) \ + ({ \ + unsigned long rval; \ + asm volatile("mfdcrx %0,%1" : "=r"(rval) : "r"(rn)); \ + rval; \ + }) /* 440GP/440GX SDRAM controller DCRs */ #define DCRN_SDRAM0_CFGADDR 0x010 diff --git a/arch/powerpc/boot/div64.S b/arch/powerpc/boot/div64.S index d271ab542673..bbcb8a4cc121 100644 --- a/arch/powerpc/boot/div64.S +++ b/arch/powerpc/boot/div64.S @@ -57,3 +57,55 @@ __div64_32: stw r8,4(r3) mr r3,r6 # return the remainder in r3 blr + +/* + * Extended precision shifts. + * + * Updated to be valid for shift counts from 0 to 63 inclusive. + * -- Gabriel + * + * R3/R4 has 64 bit value + * R5 has shift count + * result in R3/R4 + * + * ashrdi3: arithmetic right shift (sign propagation) + * lshrdi3: logical right shift + * ashldi3: left shift + */ + .globl __ashrdi3 +__ashrdi3: + subfic r6,r5,32 + srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count + addi r7,r5,32 # could be xori, or addi with -32 + slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count) + rlwinm r8,r7,0,32 # t3 = (count < 32) ? 32 : 0 + sraw r7,r3,r7 # t2 = MSW >> (count-32) + or r4,r4,r6 # LSW |= t1 + slw r7,r7,r8 # t2 = (count < 32) ? 0 : t2 + sraw r3,r3,r5 # MSW = MSW >> count + or r4,r4,r7 # LSW |= t2 + blr + + .globl __ashldi3 +__ashldi3: + subfic r6,r5,32 + slw r3,r3,r5 # MSW = count > 31 ? 0 : MSW << count + addi r7,r5,32 # could be xori, or addi with -32 + srw r6,r4,r6 # t1 = count > 31 ? 0 : LSW >> (32-count) + slw r7,r4,r7 # t2 = count < 32 ? 0 : LSW << (count-32) + or r3,r3,r6 # MSW |= t1 + slw r4,r4,r5 # LSW = LSW << count + or r3,r3,r7 # MSW |= t2 + blr + + .globl __lshrdi3 +__lshrdi3: + subfic r6,r5,32 + srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count + addi r7,r5,32 # could be xori, or addi with -32 + slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count) + srw r7,r3,r7 # t2 = count < 32 ? 0 : MSW >> (count-32) + or r4,r4,r6 # LSW |= t1 + srw r3,r3,r5 # MSW = MSW >> count + or r4,r4,r7 # LSW |= t2 + blr diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts index 261d10c4534b..227290db866d 100644 --- a/arch/powerpc/boot/dts/asp834x-redboot.dts +++ b/arch/powerpc/boot/dts/asp834x-redboot.dts @@ -256,7 +256,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <400000000>; interrupts = <9 0x8>; @@ -266,7 +266,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <400000000>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/currituck.dts b/arch/powerpc/boot/dts/currituck.dts new file mode 100644 index 000000000000..b801dd06e573 --- /dev/null +++ b/arch/powerpc/boot/dts/currituck.dts @@ -0,0 +1,237 @@ +/* + * Device Tree Source for IBM Embedded PPC 476 Platform + * + * Copyright © 2011 Tony Breeds IBM Corporation + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/memreserve/ 0x01f00000 0x00100000; // spin table + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "ibm,currituck"; + compatible = "ibm,currituck"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,476"; + reg = <0>; + clock-frequency = <1600000000>; // 1.6 GHz + timebase-frequency = <100000000>; // 100Mhz + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "ok"; + }; + cpu@1 { + device_type = "cpu"; + model = "PowerPC,476"; + reg = <1>; + clock-frequency = <1600000000>; // 1.6 GHz + timebase-frequency = <100000000>; // 100Mhz + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "disabled"; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x01f00000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // filled in by zImage + }; + + MPIC: interrupt-controller { + compatible = "chrp,open-pic"; + interrupt-controller; + dcr-reg = <0xffc00000 0x00040000>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + }; + + plb { + compatible = "ibm,plb6"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-frequency = <200000000>; // 200Mhz + + POB0: opb { + compatible = "ibm,opb-4xx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full + * 32-bit range + */ + ranges = <0x00000000 0x00000200 0x00000000 0x80000000 + 0x80000000 0x00000200 0x80000000 0x80000000>; + clock-frequency = <100000000>; + + UART0: serial@10000000 { + device_type = "serial"; + compatible = "ns16750", "ns16550"; + reg = <0x10000000 0x00000008>; + virtual-reg = <0xe1000000>; + clock-frequency = <1851851>; // PCIe refclk/MCGC0_CTL[UART] + current-speed = <115200>; + interrupt-parent = <&MPIC>; + interrupts = <34 2>; + }; + + IIC0: i2c@00000000 { + compatible = "ibm,iic-currituck", "ibm,iic"; + reg = <0x0 0x00000014>; + interrupt-parent = <&MPIC>; + interrupts = <79 2>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "stm,m41t80", "m41st85"; + reg = <0x68>; + }; + }; + }; + + PCIE0: pciex@10100000000 { // 4xGBIF1 + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0x80 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>; + + /* Inbound starting at 0 to memsize filled in by zImage */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 46 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 47 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 48 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 49 0x2 /* int D */>; + }; + + PCIE1: pciex@30100000000 { // 4xGBIF0 + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x00000301 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000300 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0x60 0x20>; + + ranges = <0x02000000 0x00000000 0x80000000 0x00000310 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x00000340 0x0 0x0 0x00010000>; + + /* Inbound starting at 0 to memsize filled in by zImage */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 38 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 39 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 40 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 41 0x2 /* int D */>; + }; + + PCIE2: pciex@38100000000 { // 2xGBIF0 + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x2>; /* port number */ + reg = <0x00000381 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000380 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0xA0 0x20>; + + ranges = <0x02000000 0x00000000 0x80000000 0x00000390 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x000003C0 0x0 0x0 0x00010000>; + + /* Inbound starting at 0 to memsize filled in by zImage */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 54 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 55 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 56 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 57 0x2 /* int D */>; + }; + + }; + + chosen { + linux,stdout-path = &UART0; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi new file mode 100644 index 000000000000..89af62637707 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi @@ -0,0 +1,248 @@ +/* + * MPC8536 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <24 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <25 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <25 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xb000 */ +&pci3 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <27 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <27 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8536-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8536-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8536-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-gpio-0.dtsi" + + /* mark compat w/8572 to get some erratum treatment */ + gpio-controller@f000 { + compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio"; + }; + + sata@18000 { + compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <74 0x2 0 0>; + }; + + sata@19000 { + compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + cell-index = <2>; + interrupts = <41 0x2 0 0>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8536-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-etsec1-0.dtsi" +/include/ "pq3-etsec1-timer-0.dtsi" + + usb@22000 { + compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <28 0x2 0 0>; + }; + + usb@23000 { + compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <46 0x2 0 0>; + }; + + ptp_clock@24e00 { + interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>; + }; + +/include/ "pq3-etsec1-2.dtsi" + + ethernet@26000 { + cell-index = <1>; + }; + + usb@2b000 { + compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr"; + reg = <0x2b000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <60 0x2 0 0>; + }; + +/include/ "pq3-esdhc-0.dtsi" +/include/ "pq3-sec3.0-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + + global-utilities@e0000 { + compatible = "fsl,mpc8536-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi new file mode 100644 index 000000000000..7de45a784df6 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi @@ -0,0 +1,63 @@ +/* + * MPC8536 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,MPC8536"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8536@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi new file mode 100644 index 000000000000..b68eb119faef --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi @@ -0,0 +1,191 @@ +/* + * MPC8544 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8544-lbc", "fsl,pq3-localbus", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <24 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <25 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <25 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xb000 */ +&pci3 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <27 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <27 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8544-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8544-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8544-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8544-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-etsec1-0.dtsi" +/include/ "pq3-etsec1-2.dtsi" + + ethernet@26000 { + cell-index = <1>; + }; + +/include/ "pq3-sec2.1-0.dtsi" +/include/ "pq3-mpic.dtsi" + + global-utilities@e0000 { + compatible = "fsl,mpc8544-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi new file mode 100644 index 000000000000..8777f9239d9e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi @@ -0,0 +1,63 @@ +/* + * MPC8544 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,MPC8544"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8544@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi new file mode 100644 index 000000000000..9d8023a69d7d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi @@ -0,0 +1,143 @@ +/* + * MPC8548 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8548-lbc", "fsl,pq3-localbus", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <24 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <25 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; +}; + +/* controller at 0xa000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8548-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8548-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-etsec1-0.dtsi" +/include/ "pq3-etsec1-1.dtsi" +/include/ "pq3-etsec1-2.dtsi" +/include/ "pq3-etsec1-3.dtsi" + +/include/ "pq3-sec2.1-0.dtsi" +/include/ "pq3-mpic.dtsi" + + global-utilities@e0000 { + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi new file mode 100644 index 000000000000..289f1218d755 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi @@ -0,0 +1,62 @@ +/* + * MPC8548 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,MPC8548"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi new file mode 100644 index 000000000000..64e7075a9cd4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi @@ -0,0 +1,270 @@ +/* + * MPC8568 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", "simple-bus"; + interrupts = <19 2 0 0>; + sleep = <&pmc 0x08000000>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <24 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + sleep = <&pmc 0x80000000>; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + sleep = <&pmc 0x20000000>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <48 2 0 0>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + sleep = <&pmc 0x00080000>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8568-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8568-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8568-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + + i2c-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000004>; + ranges; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" + + }; + + duart-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000002>; + ranges; + +/include/ "pq3-duart-0.dtsi" + + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8568-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" + dma@21300 { + sleep = <&pmc 0x00000400>; + }; + +/include/ "pq3-etsec1-0.dtsi" + ethernet@24000 { + sleep = <&pmc 0x00000080>; + }; + +/include/ "pq3-etsec1-1.dtsi" + ethernet@25000 { + sleep = <&pmc 0x00000040>; + }; + + par_io@e0100 { + reg = <0xe0100 0x100>; + device_type = "par_io"; + }; + +/include/ "pq3-sec2.1-0.dtsi" + crypto@30000 { + sleep = <&pmc 0x01000000>; + }; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-rmu-0.dtsi" + rmu@d3000 { + sleep = <&pmc 0x00040000>; + }; + + global-utilities@e0000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + ranges = <0 0xe0000 0x1000>; + fsl,has-rstcr; + + pmc: power@70 { + compatible = "fsl,mpc8568-pmc", + "fsl,mpc8548-pmc"; + reg = <0x70 0x20>; + }; + }; +}; + +&qe { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + sleep = <&pmc 0x00000800>; + brg-frequency = <0>; + bus-frequency = <396000000>; + fsl,qe-num-riscs = <2>; + fsl,qe-num-snums = <28>; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30 + interrupt-parent = <&mpic>; + }; + + spi@4c0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,spi"; + reg = <0x4c0 0x40>; + cell-index = <0>; + interrupts = <2>; + interrupt-parent = <&qeic>; + }; + + spi@500 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl,spi"; + reg = <0x500 0x40>; + interrupts = <1>; + interrupt-parent = <&qeic>; + }; + + ucc@2000 { + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + }; + + ucc@3000 { + cell-index = <2>; + reg = <0x3000 0x200>; + interrupts = <33>; + interrupt-parent = <&qeic>; + }; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x10000 0x10000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x10000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi new file mode 100644 index 000000000000..eacd62c5fe6c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi @@ -0,0 +1,65 @@ +/* + * MPC8568 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,MPC8568"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8568@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + sleep = <&pmc 0x00008000 // core + &pmc 0x00004000>; // timebase + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi new file mode 100644 index 000000000000..3e6346a4a183 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi @@ -0,0 +1,304 @@ +/* + * MPC8569 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; + sleep = <&pmc 0x08000000>; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + sleep = <&pmc 0x20000000>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <48 2 0 0>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + sleep = <&pmc 0x00080000>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8569-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8569-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8569-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + + i2c-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000004>; + ranges; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" + + }; + + duart-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000002>; + ranges; + +/include/ "pq3-duart-0.dtsi" + + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8569-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + sleep = <&pmc 0x00200000>; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x100>; + ranges = <0x0 0xe0100 0x100>; + device_type = "par_io"; + }; + +/include/ "pq3-sec3.1-0.dtsi" + crypto@30000 { + sleep = <&pmc 0x01000000>; + }; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-rmu-0.dtsi" + rmu@d3000 { + sleep = <&pmc 0x00040000>; + }; + + global-utilities@e0000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + ranges = <0 0xe0000 0x1000>; + fsl,has-rstcr; + + pmc: power@70 { + compatible = "fsl,mpc8569-pmc", + "fsl,mpc8548-pmc"; + reg = <0x70 0x20>; + }; + }; +}; + +&qe { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + sleep = <&pmc 0x00000800>; + brg-frequency = <0>; + bus-frequency = <0>; + fsl,qe-num-riscs = <4>; + fsl,qe-num-snums = <46>; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30 + interrupt-parent = <&mpic>; + }; + + timer@440 { + compatible = "fsl,mpc8569-qe-gtm", + "fsl,qe-gtm", "fsl,gtm"; + reg = <0x440 0x40>; + interrupts = <12 13 14 15>; + interrupt-parent = <&qeic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + + spi@4c0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8569-qe-spi", "fsl,spi"; + reg = <0x4c0 0x40>; + cell-index = <0>; + interrupts = <2>; + interrupt-parent = <&qeic>; + }; + + spi@500 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl,spi"; + reg = <0x500 0x40>; + interrupts = <1>; + interrupt-parent = <&qeic>; + }; + + usb@6c0 { + compatible = "fsl,mpc8569-qe-usb", + "fsl,mpc8323-qe-usb"; + reg = <0x6c0 0x40 0x8b00 0x100>; + interrupts = <11>; + interrupt-parent = <&qeic>; + }; + + ucc@2000 { + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + }; + + ucc@2200 { + cell-index = <3>; + reg = <0x2200 0x200>; + interrupts = <34>; + interrupt-parent = <&qeic>; + }; + + ucc@3000 { + cell-index = <2>; + reg = <0x3000 0x200>; + interrupts = <33>; + interrupt-parent = <&qeic>; + }; + + ucc@3200 { + cell-index = <4>; + reg = <0x3200 0x200>; + interrupts = <35>; + interrupt-parent = <&qeic>; + }; + + ucc@3400 { + cell-index = <6>; + reg = <0x3400 0x200>; + interrupts = <41>; + interrupt-parent = <&qeic>; + }; + + ucc@3600 { + cell-index = <8>; + reg = <0x3600 0x200>; + interrupts = <43>; + interrupt-parent = <&qeic>; + }; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x10000 0x20000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x20000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi new file mode 100644 index 000000000000..b07064d11930 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi @@ -0,0 +1,64 @@ +/* + * MPC8569 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,MPC8569"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8569@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + sleep = <&pmc 0x00008000 // core + &pmc 0x00004000>; // timebase + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi new file mode 100644 index 000000000000..d44e25a48734 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi @@ -0,0 +1,196 @@ +/* + * MPC8572 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <24 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <24 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <25 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <25 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8572-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8572-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x6000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-dma-1.dtsi" +/include/ "pq3-gpio-0.dtsi" + gpio-controller@f000 { + compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio"; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x100000>; // L2,1M + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-etsec1-0.dtsi" +/include/ "pq3-etsec1-timer-0.dtsi" + + ptp_clock@24e00 { + interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>; + }; + +/include/ "pq3-etsec1-1.dtsi" +/include/ "pq3-etsec1-2.dtsi" +/include/ "pq3-etsec1-3.dtsi" +/include/ "pq3-sec3.0-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + + global-utilities@e0000 { + compatible = "fsl,mpc8572-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi new file mode 100644 index 000000000000..ca188326c2ca --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi @@ -0,0 +1,70 @@ +/* + * MPC8572 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,MPC8572"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,8572@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi new file mode 100644 index 000000000000..bd9e163c764b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi @@ -0,0 +1,198 @@ +/* + * P1010/P1014 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc", "simple-bus"; + interrupts = <16 2 0 0 19 2 0 0>; +}; + +/* controller at 0x9000 */ +&pci0 { + compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1010-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1010-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1010-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-espi-0.dtsi" + spi0: spi@7000 { + fsl,espi-num-chipselects = <1>; + }; + +/include/ "pq3-gpio-0.dtsi" +/include/ "pq3-sata2-0.dtsi" +/include/ "pq3-sata2-1.dtsi" + + can0: can@1c000 { + compatible = "fsl,p1010-flexcan"; + reg = <0x1c000 0x1000>; + interrupts = <48 0x2 0 0>; + }; + + can1: can@1d000 { + compatible = "fsl,p1010-flexcan"; + reg = <0x1d000 0x1000>; + interrupts = <61 0x2 0 0>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1010-l2-cache-controller", + "fsl,p1014-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + fsl,sdhci-auto-cmd12; + }; + +/include/ "pq3-sec4.4-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: ethernet@b0000 { + queue-group@b0000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: ethernet@b1000 { + queue-group@b1000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + }; + +/include/ "pq3-etsec2-2.dtsi" + enet2: ethernet@b2000 { + queue-group@b2000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + + }; + + global-utilities@e0000 { + compatible = "fsl,p1010-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi new file mode 100644 index 000000000000..7354a8f90ea5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi @@ -0,0 +1,64 @@ +/* + * P1010/P1014 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P1010"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + can0 = &can0; + can1 = &can1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1010@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi new file mode 100644 index 000000000000..fc924c5ffebe --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi @@ -0,0 +1,174 @@ +/* + * P1020/P1011 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x9000 */ +&pci0 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1020-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1020-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1020-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-gpio-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1020-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" +/include/ "pq3-usb2-dr-1.dtsi" + +/include/ "pq3-esdhc-0.dtsi" +/include/ "pq3-sec3.3-0.dtsi" + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: enet0_grp2: ethernet@b0000 { + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: enet1_grp2: ethernet@b1000 { + }; + +/include/ "pq3-etsec2-2.dtsi" + enet2: enet2_grp2: ethernet@b2000 { + }; + + global-utilities@e0000 { + compatible = "fsl,p1020-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; + +/include/ "pq3-etsec2-grp2-0.dtsi" +/include/ "pq3-etsec2-grp2-1.dtsi" +/include/ "pq3-etsec2-grp2-2.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi new file mode 100644 index 000000000000..6f0376e554eb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi @@ -0,0 +1,68 @@ +/* + * P1020/P1011 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P1020"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1020@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1020@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi new file mode 100644 index 000000000000..38ba54d1e32e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi @@ -0,0 +1,225 @@ +/* + * P1021/P1012 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x9000 */ +&pci0 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1021-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1021-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1021-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-gpio-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1021-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" + +/include/ "pq3-esdhc-0.dtsi" +/include/ "pq3-sec3.3-0.dtsi" + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: enet0_grp2: ethernet@b0000 { + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: enet1_grp2: ethernet@b1000 { + }; + +/include/ "pq3-etsec2-2.dtsi" + enet2: enet2_grp2: ethernet@b2000 { + }; + + global-utilities@e0000 { + compatible = "fsl,p1021-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; + +&qe { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + fsl,qe-num-riscs = <1>; + fsl,qe-num-snums = <28>; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44 + }; + + ucc@2000 { + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2120 0x18>; + compatible = "fsl,ucc-mdio"; + }; + + ucc@2400 { + cell-index = <5>; + reg = <0x2400 0x200>; + interrupts = <40>; + interrupt-parent = <&qeic>; + }; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x10000 0x6000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x6000>; + }; + }; +}; + +/include/ "pq3-etsec2-grp2-0.dtsi" +/include/ "pq3-etsec2-grp2-1.dtsi" +/include/ "pq3-etsec2-grp2-2.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi new file mode 100644 index 000000000000..4abd54bc3308 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi @@ -0,0 +1,68 @@ +/* + * P1021/P1012 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P1021"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1021@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1021@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi new file mode 100644 index 000000000000..16239b199d0a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi @@ -0,0 +1,235 @@ +/* + * P1022/P1013 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x9000 */ +&pci0 { + compatible = "fsl,p1022-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,p1022-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xb000 */ +&pci2 { + compatible = "fsl,p1022-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1022-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1022-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1022-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-dma-1.dtsi" + dma@c300 { + dma00: dma-channel@0 { + compatible = "fsl,ssi-dma-channel"; + }; + dma01: dma-channel@80 { + compatible = "fsl,ssi-dma-channel"; + }; + }; + +/include/ "pq3-gpio-0.dtsi" + + display@10000 { + compatible = "fsl,diu", "fsl,p1022-diu"; + reg = <0x10000 1000>; + interrupts = <64 2 0 0>; + }; + + ssi@15000 { + compatible = "fsl,mpc8610-ssi"; + cell-index = <0>; + reg = <0x15000 0x100>; + interrupts = <75 2 0 0>; + fsl,playback-dma = <&dma00>; + fsl,capture-dma = <&dma01>; + fsl,fifo-depth = <15>; + }; + +/include/ "pq3-sata2-0.dtsi" +/include/ "pq3-sata2-1.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1022-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" +/include/ "pq3-usb2-dr-1.dtsi" + +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + fsl,sdhci-auto-cmd12; + }; + +/include/ "pq3-sec3.3-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: enet0_grp2: ethernet@b0000 { + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: enet1_grp2: ethernet@b1000 { + }; + + global-utilities@e0000 { + compatible = "fsl,p1022-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + power@e0070{ + compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc"; + reg = <0xe0070 0x20>; + }; + +}; + +/include/ "pq3-etsec2-grp2-0.dtsi" +/include/ "pq3-etsec2-grp2-1.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi new file mode 100644 index 000000000000..e930f4f7ca89 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi @@ -0,0 +1,68 @@ +/* + * P1022/P1013 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P1022"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1022@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1022@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi new file mode 100644 index 000000000000..b06bb4cc1fe8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi @@ -0,0 +1,224 @@ +/* + * P1023/P1017 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0xa000 */ +&pci0 { + compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + }; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + }; +}; + +/* controller at 0xb000 */ +&pci2 { + compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1023-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1023-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1023-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-gpio-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1023-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" + + crypto: crypto@300000 { + compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000 0x10000>; + ranges = <0 0x30000 0x10000>; + interrupts = <58 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <57 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <57 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.2-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; + }; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + + global-utilities@e0000 { + compatible = "fsl,p1023-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi new file mode 100644 index 000000000000..ac45f6d93385 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi @@ -0,0 +1,76 @@ +/* + * P1023/P1017 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P1023"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1023@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1023@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi new file mode 100644 index 000000000000..c041050561a7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi @@ -0,0 +1,194 @@ +/* + * P2020/P2010 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0xa000 */ +&pci0 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <25 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <25 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0x8000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <24 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <24 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p2020-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p2020-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p2020-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-espi-0.dtsi" + spi0: spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-dma-1.dtsi" +/include/ "pq3-gpio-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p2020-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2,512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" +/include/ "pq3-etsec1-0.dtsi" +/include/ "pq3-etsec1-timer-0.dtsi" + + ptp_clock@24e00 { + interrupts = <68 2 0 0 69 2 0 0 70 2 0 0>; + }; + + +/include/ "pq3-etsec1-1.dtsi" +/include/ "pq3-etsec1-2.dtsi" +/include/ "pq3-esdhc-0.dtsi" +/include/ "pq3-sec3.1-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + + global-utilities@e0000 { + compatible = "fsl,p2020-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi new file mode 100644 index 000000000000..3213288641d1 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi @@ -0,0 +1,69 @@ +/* + * P2020/P2010 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P2020"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P2020@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P2020@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi new file mode 100644 index 000000000000..234a399ddeb2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -0,0 +1,325 @@ +/* + * P2041/P2040 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x202000 */ +&pci2 { + compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 13>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@42000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x42000 0x1000>; + }; + dcsr-cpu-sb-proxy@43000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x43000 0x1000>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000>; + interrupts = <16 2 1 27>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p2041-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" +/include/ "qoriq-dma-1.dtsi" +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + sdhci,auto-cmd12; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + phy_type = "utmi"; + port0; + }; + +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + dr_mode = "host"; + phy_type = "utmi"; + }; + +/include/ "qoriq-sata2-0.dtsi" +/include/ "qoriq-sata2-1.dtsi" +/include/ "qoriq-sec4.2-0.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi new file mode 100644 index 000000000000..2d0a40d6b10f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi @@ -0,0 +1,111 @@ +/* + * P2041 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P2041"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500mc@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e500mc@1 { + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e500mc@2 { + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e500mc@3 { + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi new file mode 100644 index 000000000000..d41d08de7f7e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi @@ -0,0 +1,352 @@ +/* + * P3041 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x202000 */ +&pci2 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 13>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +/* controller at 0x203000 */ +&pci3 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 12>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 12>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p3041-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p3041-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p3041-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p3041-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@42000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x42000 0x1000>; + }; + dcsr-cpu-sb-proxy@43000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x43000 0x1000>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000>; + interrupts = <16 2 1 27>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p3041-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" +/include/ "qoriq-dma-1.dtsi" +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + sdhci,auto-cmd12; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + phy_type = "utmi"; + port0; + }; + +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + dr_mode = "host"; + phy_type = "utmi"; + }; + +/include/ "qoriq-sata2-0.dtsi" +/include/ "qoriq-sata2-1.dtsi" +/include/ "qoriq-sec4.2-0.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi new file mode 100644 index 000000000000..136def3536b6 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi @@ -0,0 +1,112 @@ +/* + * P3041 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P3041"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500mc@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e500mc@1 { + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e500mc@2 { + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e500mc@3 { + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi new file mode 100644 index 000000000000..a63edd195ae5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi @@ -0,0 +1,296 @@ +/* + * P3060 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@44000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu4>; + reg = <0x44000 0x1000>; + }; + dcsr-cpu-sb-proxy@45000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu5>; + reg = <0x45000 0x1000>; + }; + dcsr-cpu-sb-proxy@46000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu6>; + reg = <0x46000 0x1000>; + }; + dcsr-cpu-sb-proxy@47000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu7>; + reg = <0x47000 0x1000>; + }; + +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p3060-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x5000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + +/include/ "qoriq-rmu-0.dtsi" +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p3060-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" +/include/ "qoriq-dma-1.dtsi" +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" +/include/ "qoriq-usb2-dr-0.dtsi" +/include/ "qoriq-sec4.1-0.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi new file mode 100644 index 000000000000..00c8e70e7b90 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi @@ -0,0 +1,125 @@ +/* + * P3060 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P3060"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500mc@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e500mc@1 { + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu4: PowerPC,e500mc@4 { + device_type = "cpu"; + reg = <4>; + next-level-cache = <&L2_4>; + L2_4: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu5: PowerPC,e500mc@5 { + device_type = "cpu"; + reg = <5>; + next-level-cache = <&L2_5>; + L2_5: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu6: PowerPC,e500mc@6 { + device_type = "cpu"; + reg = <6>; + next-level-cache = <&L2_6>; + L2_6: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu7: PowerPC,e500mc@7 { + device_type = "cpu"; + reg = <7>; + next-level-cache = <&L2_7>; + L2_7: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi new file mode 100644 index 000000000000..8d35d2c1f694 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -0,0 +1,350 @@ +/* + * P4080/P4040 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p4080-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p4080-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x202000 */ +&pci2 { + compatible = "fsl,p4080-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 13>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-ddr@13000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr2>; + reg = <0x13000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@42000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x42000 0x1000>; + }; + dcsr-cpu-sb-proxy@43000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x43000 0x1000>; + }; + dcsr-cpu-sb-proxy@44000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu4>; + reg = <0x44000 0x1000>; + }; + dcsr-cpu-sb-proxy@45000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu5>; + reg = <0x45000 0x1000>; + }; + dcsr-cpu-sb-proxy@46000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu6>; + reg = <0x46000 0x1000>; + }; + dcsr-cpu-sb-proxy@47000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu7>; + reg = <0x47000 0x1000>; + }; + +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + ddr2: memory-controller@9000 { + compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller"; + reg = <0x9000 0x1000>; + interrupts = <16 2 1 22>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x5000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + +/include/ "qoriq-rmu-0.dtsi" +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p4080-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" +/include/ "qoriq-dma-1.dtsi" +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + voltage-ranges = <3300 3300>; + sdhci,auto-cmd12; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" +/include/ "qoriq-usb2-dr-0.dtsi" +/include/ "qoriq-sec4.0-0.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi new file mode 100644 index 000000000000..b9556ee3a639 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi @@ -0,0 +1,143 @@ +/* + * P4080/P4040 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P4080"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500mc@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e500mc@1 { + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e500mc@2 { + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e500mc@3 { + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu4: PowerPC,e500mc@4 { + device_type = "cpu"; + reg = <4>; + next-level-cache = <&L2_4>; + L2_4: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu5: PowerPC,e500mc@5 { + device_type = "cpu"; + reg = <5>; + next-level-cache = <&L2_5>; + L2_5: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu6: PowerPC,e500mc@6 { + device_type = "cpu"; + reg = <6>; + next-level-cache = <&L2_6>; + L2_6: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu7: PowerPC,e500mc@7 { + device_type = "cpu"; + reg = <7>; + next-level-cache = <&L2_7>; + L2_7: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi new file mode 100644 index 000000000000..914074b91a85 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi @@ -0,0 +1,355 @@ +/* + * P5020/5010 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x202000 */ +&pci2 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 13>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +/* controller at 0x203000 */ +&pci3 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 12>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 12>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-ddr@13000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr2>; + reg = <0x13000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + ddr2: memory-controller@9000 { + compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller"; + reg = <0x9000 0x1000>; + interrupts = <16 2 1 22>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p5020-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" +/include/ "qoriq-dma-1.dtsi" +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + sdhci,auto-cmd12; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + phy_type = "utmi"; + port0; + }; + +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + dr_mode = "host"; + phy_type = "utmi"; + }; + +/include/ "qoriq-sata2-0.dtsi" +/include/ "qoriq-sata2-1.dtsi" +/include/ "qoriq-sec4.2-0.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi new file mode 100644 index 000000000000..ae823a47584e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi @@ -0,0 +1,96 @@ +/* + * P5020/P5010 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; +/ { + compatible = "fsl,P5020"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e5500@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e5500@1 { + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi new file mode 100644 index 000000000000..b5b37ad30e75 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi @@ -0,0 +1,66 @@ +/* + * PQ3 DMA device tree stub [ controller @ offset 0x21000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <20 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <21 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <22 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <23 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi new file mode 100644 index 000000000000..28cb8a55d807 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi @@ -0,0 +1,66 @@ +/* + * PQ3 DMA device tree stub [ controller @ offset 0xc300 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <76 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <77 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <78 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <79 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi new file mode 100644 index 000000000000..5e268fdb9d1f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi @@ -0,0 +1,51 @@ +/* + * PQ3 DUART device tree stub [ controller @ offset 0x4000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2 0 0>; +}; + +serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi new file mode 100644 index 000000000000..5743433e278e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 eSDHC device tree stub [ controller @ offset 0x2e000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sdhc@2e000 { + compatible = "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2 0 0>; + /* Filled in by U-Boot */ + clock-frequency = <0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi new file mode 100644 index 000000000000..75854b2e0391 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 eSPI device tree stub [ controller @ offset 0x7000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +spi@7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8536-espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi new file mode 100644 index 000000000000..a1979ae334a7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi @@ -0,0 +1,53 @@ +/* + * PQ3 eTSEC device tree stub [ @ offsets 0x24000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; +}; + +mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi new file mode 100644 index 000000000000..4c4fdde1ec2a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi @@ -0,0 +1,53 @@ +/* + * PQ3 eTSEC device tree stub [ @ offsets 0x25000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; +}; + +mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi new file mode 100644 index 000000000000..4b8ab438668a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi @@ -0,0 +1,53 @@ +/* + * PQ3 eTSEC device tree stub [ @ offsets 0x26000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>; +}; + +mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi new file mode 100644 index 000000000000..40c9137729ae --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi @@ -0,0 +1,53 @@ +/* + * PQ3 eTSEC device tree stub [ @ offsets 0x27000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>; +}; + +mdio@27520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x27520 0x20>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi new file mode 100644 index 000000000000..efe2ca04bce8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi @@ -0,0 +1,39 @@ +/* + * PQ3 eTSEC Timer (IEEE 1588) device tree stub [ @ offsets 0x24e00 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ptp_clock@24e00 { + compatible = "fsl,etsec-ptp"; + reg = <0x24e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi new file mode 100644 index 000000000000..1382fec9e8c5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi @@ -0,0 +1,60 @@ +/* + * PQ3 eTSEC2 device tree stub [ @ offsets 0x24000/0xb0000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +mdio@24000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-mdio"; + reg = <0x24000 0x1000 0xb0030 0x4>; +}; + +ethernet@b0000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + + queue-group@b0000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb0000 0x1000>; + interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi new file mode 100644 index 000000000000..221cd2ea5b31 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi @@ -0,0 +1,60 @@ +/* + * PQ3 eTSEC2 device tree stub [ @ offsets 0x25000/0xb1000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +mdio@25000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-tbi"; + reg = <0x25000 0x1000 0xb1030 0x4>; +}; + +ethernet@b1000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + + queue-group@b1000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb1000 0x1000>; + interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi new file mode 100644 index 000000000000..61456c317609 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi @@ -0,0 +1,59 @@ +/* + * PQ3 eTSEC2 device tree stub [ @ offsets 0x26000/0xb2000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +mdio@26000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-tbi"; + reg = <0x26000 0x1000 0xb1030 0x4>; +}; + +ethernet@b2000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + + queue-group@b2000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb2000 0x1000>; + interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi new file mode 100644 index 000000000000..034ab8fac22f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi @@ -0,0 +1,42 @@ +/* + * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb4000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&enet0_grp2 { + queue-group@b4000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb4000 0x1000>; + interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi new file mode 100644 index 000000000000..3be9ba3b374e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi @@ -0,0 +1,42 @@ +/* + * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb5000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&enet1_grp2 { + queue-group@b5000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb5000 0x1000>; + interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi new file mode 100644 index 000000000000..02a33457048c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi @@ -0,0 +1,42 @@ +/* + * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb6000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&enet2_grp2 { + queue-group@b6000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb6000 0x1000>; + interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi new file mode 100644 index 000000000000..72a3ef5945c1 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 GPIO device tree stub [ controller @ offset 0xf000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +gpio-controller@f000 { + #gpio-cells = <2>; + compatible = "fsl,pq3-gpio"; + reg = <0xf000 0x100>; + interrupts = <47 0x2 0 0>; + gpio-controller; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi new file mode 100644 index 000000000000..d1dd6fb82a78 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi @@ -0,0 +1,43 @@ +/* + * PQ3 I2C device tree stub [ controller @ offset 0x3000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2 0 0>; + dfsrr; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi new file mode 100644 index 000000000000..a9bd803e2090 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi @@ -0,0 +1,43 @@ +/* + * PQ3 I2C device tree stub [ controller @ offset 0x3100 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2 0 0>; + dfsrr; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi new file mode 100644 index 000000000000..8734cffae1a1 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi @@ -0,0 +1,42 @@ +/* + * PQ3 MPIC Timer (Group B) device tree stub [ controller @ offset 0x42100 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +timer@42100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x42100 0x100 0x42300 4>; + interrupts = <4 0 3 0 + 5 0 3 0 + 6 0 3 0 + 7 0 3 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi new file mode 100644 index 000000000000..5c8046065844 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi @@ -0,0 +1,66 @@ +/* + * PQ3 MPIC device tree stub [ controller @ offset 0x40000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <4>; + reg = <0x40000 0x40000>; + compatible = "fsl,mpic"; + device_type = "open-pic"; +}; + +timer@41100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x41100 0x100 0x41300 4>; + interrupts = <0 0 3 0 + 1 0 3 0 + 2 0 3 0 + 3 0 3 0>; +}; + +msi@41600 { + compatible = "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi new file mode 100644 index 000000000000..587ca9ffad7d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi @@ -0,0 +1,68 @@ +/* + * PQ3 RIO Message Unit device tree stub [ controller @ offset 0xd3000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +rmu: rmu@d3000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,srio-rmu"; + reg = <0xd3000 0x500>; + ranges = <0x0 0xd3000 0x500>; + + message-unit@0 { + compatible = "fsl,srio-msg-unit"; + reg = <0x0 0x100>; + interrupts = < + 53 2 0 0 /* msg1_tx_irq */ + 54 2 0 0>;/* msg1_rx_irq */ + }; + message-unit@100 { + compatible = "fsl,srio-msg-unit"; + reg = <0x100 0x100>; + interrupts = < + 55 2 0 0 /* msg2_tx_irq */ + 56 2 0 0>;/* msg2_rx_irq */ + }; + doorbell-unit@400 { + compatible = "fsl,srio-dbell-unit"; + reg = <0x400 0x80>; + interrupts = < + 49 2 0 0 /* bell_outb_irq */ + 50 2 0 0>;/* bell_inb_irq */ + }; + port-write-unit@4e0 { + compatible = "fsl,srio-port-write-unit"; + reg = <0x4e0 0x20>; + interrupts = <48 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi new file mode 100644 index 000000000000..3c28dd08d38b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi @@ -0,0 +1,40 @@ +/* + * PQ3 SATAv2 device tree stub [ controller @ offset 0x18000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sata@18000 { + compatible = "fsl,pq-sata-v2"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <74 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi new file mode 100644 index 000000000000..eefaf2855e3b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi @@ -0,0 +1,40 @@ +/* + * PQ3 SATAv2 device tree stub [ controller @ offset 0x19000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sata@19000 { + compatible = "fsl,pq-sata-v2"; + reg = <0x19000 0x1000>; + cell-index = <2>; + interrupts = <41 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi new file mode 100644 index 000000000000..02a5c7ae72d0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi @@ -0,0 +1,43 @@ +/* + * PQ3 Sec/Crypto 2.1 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 0 0>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xfe>; + fsl,descriptor-types-mask = <0x12b0ebf>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi new file mode 100644 index 000000000000..bba1ba44ccf0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi @@ -0,0 +1,45 @@ +/* + * PQ3 Sec/Crypto 3.0 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec3.0", + "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 0 0 58 2 0 0>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi new file mode 100644 index 000000000000..8f0a5669bee5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi @@ -0,0 +1,45 @@ +/* + * PQ3 Sec/Crypto 3.1 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec3.1", "fsl,sec3.0", + "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 0 0 58 2 0 0>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xbfe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi new file mode 100644 index 000000000000..c227f2748a24 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi @@ -0,0 +1,45 @@ +/* + * PQ3 Sec/Crypto 3.3 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0", + "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 0 0 58 2 0 0>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x97c>; + fsl,descriptor-types-mask = <0x3a30abf>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi new file mode 100644 index 000000000000..bf957a7fca2a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi @@ -0,0 +1,65 @@ +/* + * PQ3 Sec/Crypto 4.4 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec4.4", "fsl,sec4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000 0x10000>; + interrupts = <58 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <45 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi new file mode 100644 index 000000000000..185ab9dc3ecd --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 USB DR device tree stub [ controller @ offset 0x22000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +usb@22000 { + compatible = "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <28 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi new file mode 100644 index 000000000000..fe24cd612fff --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 USB DR device tree stub [ controller @ offset 0x23000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <46 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi new file mode 100644 index 000000000000..1aebf3ea4ca5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi @@ -0,0 +1,66 @@ +/* + * QorIQ DMA device tree stub [ controller @ offset 0x100000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma0: dma@100300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x100300 0x4>; + ranges = <0x0 0x100100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <28 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <29 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <30 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <31 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi new file mode 100644 index 000000000000..ecf5e180fe79 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi @@ -0,0 +1,66 @@ +/* + * QorIQ DMA device tree stub [ controller @ offset 0x101000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma1: dma@101300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x101300 0x4>; + ranges = <0x0 0x101100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <32 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <33 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <34 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <35 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi new file mode 100644 index 000000000000..225c07b4e8ab --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi @@ -0,0 +1,51 @@ +/* + * QorIQ DUART device tree stub [ controller @ offset 0x11c000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +serial0: serial@11c500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x11c500 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; +}; + +serial1: serial@11c600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x11c600 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi new file mode 100644 index 000000000000..d23233a56b91 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi @@ -0,0 +1,51 @@ +/* + * QorIQ DUART device tree stub [ controller @ offset 0x11d000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +serial2: serial@11d500 { + cell-index = <2>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x11d500 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; +}; + +serial3: serial@11d600 { + cell-index = <3>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x11d600 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi new file mode 100644 index 000000000000..20835ae216c7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi @@ -0,0 +1,40 @@ +/* + * QorIQ eSDHC device tree stub [ controller @ offset 0x114000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sdhc: sdhc@114000 { + compatible = "fsl,esdhc"; + reg = <0x114000 0x1000>; + interrupts = <48 2 0 0>; + clock-frequency = <0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi new file mode 100644 index 000000000000..6db06975e095 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ eSPI device tree stub [ controller @ offset 0x110000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +spi@110000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8536-espi"; + reg = <0x110000 0x1000>; + interrupts = <53 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi new file mode 100644 index 000000000000..cf714f5f68bc --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ GPIO device tree stub [ controller @ offset 0x130000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +gpio0: gpio@130000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x130000 0x1000>; + interrupts = <55 2 0 0>; + #gpio-cells = <2>; + gpio-controller; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi new file mode 100644 index 000000000000..5f9bf7debe4c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi @@ -0,0 +1,53 @@ +/* + * QorIQ I2C device tree stub [ controller @ offset 0x118000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +i2c@118000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x118000 0x100>; + interrupts = <38 2 0 0>; + dfsrr; +}; + +i2c@118100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x118100 0x100>; + interrupts = <38 2 0 0>; + dfsrr; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi new file mode 100644 index 000000000000..7989bf5eeb53 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi @@ -0,0 +1,53 @@ +/* + * QorIQ I2C device tree stub [ controller @ offset 0x119000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +i2c@119000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <2>; + compatible = "fsl-i2c"; + reg = <0x119000 0x100>; + interrupts = <39 2 0 0>; + dfsrr; +}; + +i2c@119100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <3>; + compatible = "fsl-i2c"; + reg = <0x119100 0x100>; + interrupts = <39 2 0 0>; + dfsrr; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi new file mode 100644 index 000000000000..b9bada6a87dc --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi @@ -0,0 +1,106 @@ +/* + * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <4>; + reg = <0x40000 0x40000>; + compatible = "fsl,mpic", "chrp,open-pic"; + device_type = "open-pic"; + clock-frequency = <0x0>; +}; + +timer@41100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x41100 0x100 0x41300 4>; + interrupts = <0 0 3 0 + 1 0 3 0 + 2 0 3 0 + 3 0 3 0>; +}; + +msi0: msi@41600 { + compatible = "fsl,mpic-msi"; + reg = <0x41600 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; +}; + +msi1: msi@41800 { + compatible = "fsl,mpic-msi"; + reg = <0x41800 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe8 0 0 0 + 0xe9 0 0 0 + 0xea 0 0 0 + 0xeb 0 0 0 + 0xec 0 0 0 + 0xed 0 0 0 + 0xee 0 0 0 + 0xef 0 0 0>; +}; + +msi2: msi@41a00 { + compatible = "fsl,mpic-msi"; + reg = <0x41a00 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xf0 0 0 0 + 0xf1 0 0 0 + 0xf2 0 0 0 + 0xf3 0 0 0 + 0xf4 0 0 0 + 0xf5 0 0 0 + 0xf6 0 0 0 + 0xf7 0 0 0>; +}; + +timer@42100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x42100 0x100 0x42300 4>; + interrupts = <4 0 3 0 + 5 0 3 0 + 6 0 3 0 + 7 0 3 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi new file mode 100644 index 000000000000..ca7fec792e53 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ RIO Message Unit device tree stub [ controller @ offset 0xd3000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +rmu: rmu@d3000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,srio-rmu"; + reg = <0xd3000 0x500>; + ranges = <0x0 0xd3000 0x500>; + + message-unit@0 { + compatible = "fsl,srio-msg-unit"; + reg = <0x0 0x100>; + interrupts = < + 60 2 0 0 /* msg1_tx_irq */ + 61 2 0 0>;/* msg1_rx_irq */ + }; + message-unit@100 { + compatible = "fsl,srio-msg-unit"; + reg = <0x100 0x100>; + interrupts = < + 62 2 0 0 /* msg2_tx_irq */ + 63 2 0 0>;/* msg2_rx_irq */ + }; + doorbell-unit@400 { + compatible = "fsl,srio-dbell-unit"; + reg = <0x400 0x80>; + interrupts = < + 56 2 0 0 /* bell_outb_irq */ + 57 2 0 0>;/* bell_inb_irq */ + }; + port-write-unit@4e0 { + compatible = "fsl,srio-port-write-unit"; + reg = <0x4e0 0x20>; + interrupts = <16 2 1 11>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi new file mode 100644 index 000000000000..b642047fdecf --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi @@ -0,0 +1,39 @@ +/* + * QorIQ SATAv2 device tree stub [ controller @ offset 0x220000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sata@220000 { + compatible = "fsl,pq-sata-v2"; + reg = <0x220000 0x1000>; + interrupts = <68 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi new file mode 100644 index 000000000000..c57370259750 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi @@ -0,0 +1,39 @@ +/* + * QorIQ SATAv2 device tree stub [ controller @ offset 0x221000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sata@221000 { + compatible = "fsl,pq-sata-v2"; + reg = <0x221000 0x1000>; + interrupts = <69 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi new file mode 100644 index 000000000000..0cbbac329539 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi @@ -0,0 +1,100 @@ +/* + * QorIQ Sec/Crypto 4.0 device tree stub [ controller @ offset 0x300000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto: crypto@300000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; +}; + +sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi new file mode 100644 index 000000000000..3308986bba0d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi @@ -0,0 +1,109 @@ +/* + * QorIQ Sec/Crypto 4.1 device tree stub [ controller @ offset 0x300000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto: crypto@300000 { + compatible = "fsl,sec-v4.1", "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.1-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.1-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.1-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.1-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.1-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.1-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.1-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.1-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.1-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; +}; + +sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi new file mode 100644 index 000000000000..7990e0d3d6f2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi @@ -0,0 +1,109 @@ +/* + * QorIQ Sec/Crypto 4.2 device tree stub [ controller @ offset 0x300000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto: crypto@300000 { + compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.2-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; +}; + +sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi new file mode 100644 index 000000000000..4dd6f84c239c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ USB DR device tree stub [ controller @ offset 0x211000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +usb@211000 { + compatible = "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + reg = <0x211000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <45 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi new file mode 100644 index 000000000000..f053835aa1c7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ USB Host device tree stub [ controller @ offset 0x210000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +usb@210000 { + compatible = "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + reg = <0x210000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts index 2266bbb303d0..38dcb96c8e26 100644 --- a/arch/powerpc/boot/dts/gef_ppc9a.dts +++ b/arch/powerpc/boot/dts/gef_ppc9a.dts @@ -339,7 +339,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <0x2a 0x2>; @@ -349,7 +349,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <0x1c 0x2>; diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts index 429e87d9acef..5ab8932d09b7 100644 --- a/arch/powerpc/boot/dts/gef_sbc310.dts +++ b/arch/powerpc/boot/dts/gef_sbc310.dts @@ -337,7 +337,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <0x2a 0x2>; @@ -347,7 +347,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <0x1c 0x2>; diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index d81201ac2cad..d5341f5741aa 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -337,7 +337,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <0x2a 0x2>; @@ -347,7 +347,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <0x1c 0x2>; diff --git a/arch/powerpc/boot/dts/klondike.dts b/arch/powerpc/boot/dts/klondike.dts new file mode 100644 index 000000000000..8c9429033618 --- /dev/null +++ b/arch/powerpc/boot/dts/klondike.dts @@ -0,0 +1,227 @@ +/* + * Device Tree for Klondike (APM8018X) board. + * + * Copyright (c) 2010, Applied Micro Circuits Corporation + * Author: Tanmay Inamdar <tinamdar@apm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "apm,klondike"; + compatible = "apm,klondike"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,apm8018x"; + reg = <0x00000000>; + clock-frequency = <300000000>; /* Filled in by U-Boot */ + timebase-frequency = <300000000>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; /* 16 kB */ + d-cache-size = <16384>; /* 16 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x010>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x010>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x010>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x0a 0x4 0x0b 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x010>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + plb { + compatible = "ibm,plb4"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-apm8018x"; + dcr-reg = <0x010 0x002>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <16>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC1>; + interrupts = </*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x1 0x4 + /*TXDE*/ 0x2 0x4 + /*RXDE*/ 0x3 0x4>; + }; + + POB0: opb { + compatible = "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x20000000 0x20000000 0x30000000 + 0x50000000 0x50000000 0x10000000 + 0x60000000 0x60000000 0x10000000 + 0xFE000000 0xFE000000 0x00010000>; + dcr-reg = <0x100 0x020>; + clock-frequency = <300000000>; /* Filled in by U-Boot */ + + RGMII0: emac-rgmii@400a2000 { + compatible = "ibm,rgmii"; + reg = <0x400a2000 0x00000010>; + has-mdio; + }; + + TAH0: emac-tah@400a3000 { + compatible = "ibm,tah"; + reg = <0x400a3000 0x100>; + }; + + TAH1: emac-tah@400a4000 { + compatible = "ibm,tah"; + reg = <0x400a4000 0x100>; + }; + + EMAC0: ethernet@400a0000 { + compatible = "ibm,emac4", "ibm-emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4>; + reg = <0x400a0000 0x00000100>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0x0>; + mal-rx-channel = <0x0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-address = <0x2>; + turbo = "no"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@400a1000 { + compatible = "ibm,emac4", "ibm-emac4sync"; + status = "disabled"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4>; + reg = <0x400a1000 0x00000100>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-address = <0x3>; + turbo = "no"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@50001000"; + }; +}; diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts index d16bae1230f7..983aee185793 100644 --- a/arch/powerpc/boot/dts/kmeter1.dts +++ b/arch/powerpc/boot/dts/kmeter1.dts @@ -80,7 +80,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <264000000>; interrupts = <9 0x8>; diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts index 8d725d10882f..0a4545159e80 100644 --- a/arch/powerpc/boot/dts/kuroboxHD.dts +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -84,7 +84,7 @@ XXXX add flash parts, rtc, ?? serial0: serial@80004500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x80004500 0x8>; clock-frequency = <97553800>; current-speed = <9600>; @@ -95,7 +95,7 @@ XXXX add flash parts, rtc, ?? serial1: serial@80004600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x80004600 0x8>; clock-frequency = <97553800>; current-speed = <57600>; diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts index b13a11eb81b0..0e758b347cdb 100644 --- a/arch/powerpc/boot/dts/kuroboxHG.dts +++ b/arch/powerpc/boot/dts/kuroboxHG.dts @@ -84,7 +84,7 @@ XXXX add flash parts, rtc, ?? serial0: serial@80004500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x80004500 0x8>; clock-frequency = <130041000>; current-speed = <9600>; @@ -95,7 +95,7 @@ XXXX add flash parts, rtc, ?? serial1: serial@80004600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x80004600 0x8>; clock-frequency = <130041000>; current-speed = <57600>; diff --git a/arch/powerpc/boot/dts/mpc8308_p1m.dts b/arch/powerpc/boot/dts/mpc8308_p1m.dts index 697b3f6b78bf..22b0832b6c31 100644 --- a/arch/powerpc/boot/dts/mpc8308_p1m.dts +++ b/arch/powerpc/boot/dts/mpc8308_p1m.dts @@ -233,7 +233,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <133333333>; interrupts = <9 0x8>; @@ -243,7 +243,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <133333333>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts index a0bd1881081e..f66d10d95a8d 100644 --- a/arch/powerpc/boot/dts/mpc8308rdb.dts +++ b/arch/powerpc/boot/dts/mpc8308rdb.dts @@ -208,7 +208,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <133333333>; interrupts = <9 0x8>; @@ -218,7 +218,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <133333333>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index ac1eb320c7b4..1c836c6c5be6 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -261,7 +261,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -271,7 +271,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index 4dd08c322979..811848e93aef 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -265,7 +265,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <133333333>; interrupts = <9 0x8>; @@ -275,7 +275,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <133333333>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 05ad8c98e527..da9c72ddc343 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -105,7 +105,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -115,7 +115,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index f4fadb23ad6f..ff7b15b340a3 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -83,7 +83,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -93,7 +93,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 505dc842d808..2608679d0d4a 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -283,7 +283,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; // from bootloader interrupts = <9 0x8>; @@ -293,7 +293,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; // from bootloader interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index eb732115f016..6cd044d8fb89 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -189,7 +189,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; // from bootloader interrupts = <9 0x8>; @@ -199,7 +199,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; // from bootloader interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index 230febb9b72f..4552864082c2 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -242,7 +242,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -252,7 +252,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 45cfa1c50a2a..c0e450a551bf 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -136,7 +136,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <264000000>; interrupts = <9 0x8>; @@ -146,7 +146,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <264000000>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts index bdf4459677b1..b6e9aec1d860 100644 --- a/arch/powerpc/boot/dts/mpc836x_rdk.dts +++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts @@ -102,7 +102,7 @@ serial0: serial@4500 { device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; interrupts = <9 8>; interrupt-parent = <&ipic>; @@ -112,7 +112,7 @@ serial1: serial@4600 { device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; interrupts = <10 8>; interrupt-parent = <&ipic>; diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index 855782c5e5ec..cfccef57cd1d 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -276,7 +276,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -286,7 +286,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index dbc1b988b29d..353deff1b7f6 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -321,7 +321,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -331,7 +331,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts index 9ea783056969..ef4a305a0d0c 100644 --- a/arch/powerpc/boot/dts/mpc8377_wlan.dts +++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts @@ -304,7 +304,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -314,7 +314,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index f70cf6000839..538fcb927337 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -315,7 +315,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -325,7 +325,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index 3447eb9f6e88..32333a908f3d 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -321,7 +321,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -331,7 +331,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index 645ec51cc6e1..5387092fdfb4 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -313,7 +313,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -323,7 +323,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index 15560c619b04..46224c2430ff 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -319,7 +319,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -329,7 +329,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index a75c10eed269..c15881574fdc 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -9,24 +9,11 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/mpc8536si-pre.dtsi" / { model = "fsl,mpc8536ds"; compatible = "fsl,mpc8536ds"; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - pci3 = &pci3; - }; cpus { #cpus = <1>; @@ -45,403 +32,34 @@ reg = <0 0 0 0>; // Filled by U-Boot }; - soc@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,mpc8536-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8536-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 0x2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8536-l2-cache-controller"; - reg = <0x20000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <16 0x2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - rtc@68 { - compatible = "dallas,ds3232"; - reg = <0x68>; - interrupts = <0 0x1>; - interrupt-parent = <&mpic>; - }; - }; - - spi@7000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc8536-espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2>; - interrupt-parent = <&mpic>; - fsl,espi-num-chipselects = <4>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,s25sl12801"; - reg = <0>; - spi-max-frequency = <40000000>; - partition@u-boot { - label = "u-boot"; - reg = <0x00000000 0x00100000>; - read-only; - }; - partition@kernel { - label = "kernel"; - reg = <0x00100000 0x00500000>; - read-only; - }; - partition@dtb { - label = "dtb"; - reg = <0x00600000 0x00100000>; - read-only; - }; - partition@fs { - label = "file system"; - reg = <0x00700000 0x00900000>; - }; - }; - flash@1 { - compatible = "spansion,s25sl12801"; - reg = <1>; - spi-max-frequency = <40000000>; - }; - flash@2 { - compatible = "spansion,s25sl12801"; - reg = <2>; - spi-max-frequency = <40000000>; - }; - flash@3 { - compatible = "spansion,s25sl12801"; - reg = <3>; - spi-max-frequency = <40000000>; - }; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma"; - reg = <0x21300 4>; - ranges = <0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8536-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8536-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8536-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8536-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - usb@22000 { - compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; - reg = <0x22000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; - phy_type = "ulpi"; - }; - - usb@23000 { - compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; - reg = <0x23000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&mpic>; - interrupts = <46 0x2>; - phy_type = "ulpi"; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 0x1>; - reg = <0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 0x1>; - reg = <1>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - usb@2b000 { - compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr"; - reg = <0x2b000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&mpic>; - interrupts = <60 0x2>; - dr_mode = "peripheral"; - phy_type = "ulpi"; - }; - - sdhci@2e000 { - compatible = "fsl,mpc8536-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2>; - interrupt-parent = <&mpic>; - clock-frequency = <250000000>; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 0x2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 0x2>; - interrupt-parent = <&mpic>; - }; - - crypto@30000 { - compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", - "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x9fe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - sata@18000 { - compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; - reg = <0x18000 0x1000>; - cell-index = <1>; - interrupts = <74 0x2>; - interrupt-parent = <&mpic>; - }; - - sata@19000 { - compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; - reg = <0x19000 0x1000>; - cell-index = <2>; - interrupts = <41 0x2>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,mpc8548-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - big-endian; - }; + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + }; - msi@41600 { - compatible = "fsl,mpc8536-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0 0xffe00000 0x100000>; }; pci0: pci@ffe08000 { - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; + reg = <0 0xffe08000 0 0x1000>; + ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000 + 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>; + clock-frequency = <66666666>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 J17 Slot 1 */ - 0x8800 0 0 1 &mpic 1 1 - 0x8800 0 0 2 &mpic 2 1 - 0x8800 0 0 3 &mpic 3 1 - 0x8800 0 0 4 &mpic 4 1>; - - interrupt-parent = <&mpic>; - interrupts = <24 0x2>; - bus-range = <0 0xff>; - ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000 - 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe08000 0 0x1000>; + 0x8800 0 0 1 &mpic 1 1 0 0 + 0x8800 0 0 2 &mpic 2 1 0 0 + 0x8800 0 0 3 &mpic 3 1 0 0 + 0x8800 0 0 4 &mpic 4 1 0 0>; }; pci1: pcie@ffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xffe09000 0 0x1000>; - bus-range = <0 0xff>; ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000 0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 0x2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 - >; pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x02000000 0 0x98000000 0x02000000 0 0x98000000 0 0x08000000 @@ -453,31 +71,10 @@ }; pci2: pcie@ffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xffe0a000 0 0x1000>; - bus-range = <0 0xff>; ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000 0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 0x2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 - >; pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x02000000 0 0x90000000 0x02000000 0 0x90000000 0 0x08000000 @@ -489,32 +86,10 @@ }; pci3: pcie@ffe0b000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xffe0b000 0 0x1000>; - bus-range = <0 0xff>; ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000 0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <27 0x2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 8 1 - 0000 0 0 2 &mpic 9 1 - 0000 0 0 3 &mpic 10 1 - 0000 0 0 4 &mpic 11 1 - >; - pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x02000000 0 0xa0000000 0x02000000 0 0xa0000000 0 0x20000000 @@ -525,3 +100,6 @@ }; }; }; + +/include/ "fsl/mpc8536si-post.dtsi" +/include/ "mpc8536ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8536ds.dtsi b/arch/powerpc/boot/dts/mpc8536ds.dtsi new file mode 100644 index 000000000000..1462e4cf49d7 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8536ds.dtsi @@ -0,0 +1,141 @@ +/* + * MPC8536DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_soc { + i2c@3100 { + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0 0x1 0 0>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + flash@1 { + compatible = "spansion,s25sl12801"; + reg = <1>; + spi-max-frequency = <40000000>; + }; + flash@2 { + compatible = "spansion,s25sl12801"; + reg = <2>; + spi-max-frequency = <40000000>; + }; + flash@3 { + compatible = "spansion,s25sl12801"; + reg = <3>; + spi-max-frequency = <40000000>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + usb@23000 { + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <10 0x1 0 0>; + reg = <0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupts = <10 0x1 0 0>; + reg = <1>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + usb@2b000 { + dr_mode = "peripheral"; + phy_type = "ulpi"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts index d95b26021e62..8f4b929b1d1d 100644 --- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts +++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts @@ -1,5 +1,5 @@ /* - * MPC8536 DS Device Tree Source + * MPC8536DS Device Tree Source (36-bit address map) * * Copyright 2008-2009 Freescale Semiconductor, Inc. * @@ -9,24 +9,11 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/mpc8536si-pre.dtsi" / { model = "fsl,mpc8536ds"; compatible = "fsl,mpc8536ds"; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - pci3 = &pci3; - }; cpus { #cpus = <1>; @@ -45,351 +32,34 @@ reg = <0 0 0 0>; // Filled by U-Boot }; - soc@fffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xf 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,mpc8536-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8536-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 0x2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8536-l2-cache-controller"; - reg = <0x20000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <16 0x2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - rtc@68 { - compatible = "dallas,ds3232"; - reg = <0x68>; - interrupts = <0 0x1>; - interrupt-parent = <&mpic>; - }; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma"; - reg = <0x21300 4>; - ranges = <0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8536-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8536-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8536-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8536-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - usb@22000 { - compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; - reg = <0x22000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; - phy_type = "ulpi"; - }; - - usb@23000 { - compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; - reg = <0x23000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&mpic>; - interrupts = <46 0x2>; - phy_type = "ulpi"; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 0x1>; - reg = <0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 0x1>; - reg = <1>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - usb@2b000 { - compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr"; - reg = <0x2b000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&mpic>; - interrupts = <60 0x2>; - dr_mode = "peripheral"; - phy_type = "ulpi"; - }; - - sdhci@2e000 { - compatible = "fsl,mpc8536-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2>; - interrupt-parent = <&mpic>; - clock-frequency = <250000000>; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 0x2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 0x2>; - interrupt-parent = <&mpic>; - }; - - crypto@30000 { - compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", - "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x9fe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - sata@18000 { - compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; - reg = <0x18000 0x1000>; - cell-index = <1>; - interrupts = <74 0x2>; - interrupt-parent = <&mpic>; - }; - - sata@19000 { - compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; - reg = <0x19000 0x1000>; - cell-index = <2>; - interrupts = <41 0x2>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,mpc8548-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - big-endian; - }; + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + }; - msi@41600 { - compatible = "fsl,mpc8536-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; + board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; }; - pci0: pci@fffe08000 { - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; + pci0: pci@ffe08000 { + reg = <0xf 0xffe08000 0 0x1000>; + ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>; + clock-frequency = <66666666>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 J17 Slot 1 */ - 0x8800 0 0 1 &mpic 1 1 - 0x8800 0 0 2 &mpic 2 1 - 0x8800 0 0 3 &mpic 3 1 - 0x8800 0 0 4 &mpic 4 1>; - - interrupt-parent = <&mpic>; - interrupts = <24 0x2>; - bus-range = <0 0xff>; - ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000 - 0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xf 0xffe08000 0 0x1000>; + 0x8800 0 0 1 &mpic 1 1 0 0 + 0x8800 0 0 2 &mpic 2 1 0 0 + 0x8800 0 0 3 &mpic 3 1 0 0 + 0x8800 0 0 4 &mpic 4 1 0 0>; }; - pci1: pcie@fffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; + pci1: pcie@ffe09000 { reg = <0xf 0xffe09000 0 0x1000>; - bus-range = <0 0xff>; ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000 0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 0x2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 - >; pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x02000000 0 0xf8000000 0x02000000 0 0xf8000000 0 0x08000000 @@ -401,31 +71,10 @@ }; pci2: pcie@fffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xffe0a000 0 0x1000>; - bus-range = <0 0xff>; ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000 0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 0x2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 - >; pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x02000000 0 0xf8000000 0x02000000 0 0xf8000000 0 0x08000000 @@ -437,32 +86,10 @@ }; pci3: pcie@fffe0b000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xffe0b000 0 0x1000>; - bus-range = <0 0xff>; ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <27 0x2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 8 1 - 0000 0 0 2 &mpic 9 1 - 0000 0 0 3 &mpic 10 1 - 0000 0 0 4 &mpic 11 1 - >; - pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x20000000 @@ -473,3 +100,6 @@ }; }; }; + +/include/ "fsl/mpc8536si-post.dtsi" +/include/ "mpc8536ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 8d1bf0fd9268..f99fb110c97f 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -243,7 +243,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; @@ -253,7 +253,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index 87ff96549fac..0f5e93912799 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -209,7 +209,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; @@ -219,7 +219,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index d793968743c9..e934987e882b 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -9,339 +9,52 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/mpc8544si-pre.dtsi" + / { model = "MPC8544DS"; compatible = "MPC8544DS", "MPC85xxDS"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - pci3 = &pci3; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8544@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; - }; memory { device_type = "memory"; - reg = <0x0 0x0>; // Filled by U-Boot + reg = <0 0 0 0>; // Filled by U-Boot }; - soc8544@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - - ranges = <0x0 0xe0000000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - ecm@1000 { - compatible = "fsl,mpc8544-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8544-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8544-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2, 256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8544-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8544-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8544-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8544-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8544-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy0>; - tbi-handle = <&tbi0>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy1>; - tbi-handle = <&tbi1>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,mpc8548-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - crypto@30000 { - compatible = "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xfe>; - fsl,descriptor-types-mask = <0x12b0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; + lbc: localbus@e0005000 { + reg = <0 0xe0005000 0 0x1000>; + }; - msi@41600 { - compatible = "fsl,mpc8544-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; + board_soc: soc: soc8544@e0000000 { + ranges = <0x0 0x0 0xe0000000 0x100000>; }; pci0: pci@e0008000 { - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; + reg = <0 0xe0008000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe1000000 0x0 0x10000>; + clock-frequency = <66666666>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 J17 Slot 1 */ - 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 /* IDSEL 0x12 J16 Slot 2 */ - 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <24 2>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe1000000 0x0 0x10000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008000 0x1000>; + 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0>; }; pci1: pcie@e0009000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0009000 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; + reg = <0x0 0xe0009000 0x0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe1010000 0x0 0x10000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 @@ -353,31 +66,10 @@ }; pci2: pcie@e000a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe000a000 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 - 0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; + reg = <0x0 0xe000a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe1020000 0x0 0x10000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x10000000 @@ -388,44 +80,11 @@ }; }; - pci3: pcie@e000b000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe000b000 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xb0000000 0xb0000000 0x0 0x100000 - 0x1000000 0x0 0x0 0xb0100000 0x0 0x100000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <27 2>; - interrupt-map-mask = <0xff00 0x0 0x0 0x1>; - interrupt-map = < - // IDSEL 0x1c USB - 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 - 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 - 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 - 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 - - // IDSEL 0x1d Audio - 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 - - // IDSEL 0x1e Legacy - 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 - 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 - - // IDSEL 0x1f IDE/SATA - 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 - 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 - >; - + board_pci3: pci3: pcie@e000b000 { + reg = <0x0 0xe000b000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xb0000000 0 0xb0000000 0x0 0x100000 + 0x1000000 0x0 0x00000000 0 0xb0100000 0x0 0x100000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xb0000000 0x2000000 0x0 0xb0000000 0x0 0x100000 @@ -433,70 +92,14 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 0x0 0x100000>; - - uli1575@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x2000000 0x0 0xb0000000 - 0x2000000 0x0 0xb0000000 - 0x0 0x100000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - isa@1e { - device_type = "isa"; - #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <0xf000 0x0 0x0 0x0 0x0>; - ranges = <0x1 0x0 - 0x1000000 0x0 0x0 - 0x1000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - reg = <0x1 0x20 0x2 - 0x1 0xa0 0x2 - 0x1 0x4d0 0x2>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = <&mpic>; - }; - - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <0x1 0x60 0x1 0x1 0x64 0x1>; - interrupts = <1 3 12 3>; - interrupt-parent = <&i8259>; - - keyboard@0 { - reg = <0x0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <0x1>; - compatible = "pnpPNP,f03"; - }; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <0x1 0x70 0x2>; - }; - - gpio@400 { - reg = <0x1 0x400 0x80>; - }; - }; - }; }; }; }; + +/* + * mpc8544ds.dtsi must be last to ensure board_pci3 overrides pci3 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "fsl/mpc8544si-post.dtsi" +/include/ "mpc8544ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8544ds.dtsi b/arch/powerpc/boot/dts/mpc8544ds.dtsi new file mode 100644 index 000000000000..270f64b90f4e --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8544ds.dtsi @@ -0,0 +1,161 @@ +/* + * MPC8544DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_soc { + enet0: ethernet@24000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <10 1 0 0>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupts = <10 1 0 0>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; +}; + +&board_pci3 { + pcie@0 { + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + // IDSEL 0x1c USB + 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 + 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 + 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 + 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 + + // IDSEL 0x1d Audio + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 + + // IDSEL 0x1e Legacy + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 + >; + + + uli1575@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0xb0000000 + 0x2000000 0x0 0xb0000000 + 0x0 0x100000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <9 2 0 0>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0x0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <0x1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + + gpio@400 { + reg = <0x1 0x400 0x80>; + }; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index a17a5572fb73..07b8dae0f46e 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -9,13 +9,11 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/mpc8548si-pre.dtsi" / { model = "MPC8548CDS"; compatible = "MPC8548CDS", "MPC85xxCDS"; - #address-cells = <1>; - #size-cells = <1>; aliases { ethernet0 = &enet0; @@ -29,76 +27,19 @@ pci2 = &pci2; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8548@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; // 33 MHz, from uboot - bus-frequency = <0>; // 166 MHz - clock-frequency = <0>; // 825 MHz, from uboot - next-level-cache = <&L2>; - }; - }; - memory { device_type = "memory"; - reg = <0x0 0x8000000>; // 128M at 0x0 + reg = <0 0 0x0 0x8000000>; // 128M at 0x0 }; - soc8548@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xe0000000 0x100000>; - bus-frequency = <0>; - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - ecm@1000 { - compatible = "fsl,mpc8548-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8548-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; + lbc: localbus@e0005000 { + reg = <0 0xe0005000 0 0x1000>; + }; - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8548-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2, 512K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; + soc: soc8548@e0000000 { + ranges = <0 0x0 0xe0000000 0x100000>; i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; @@ -116,351 +57,178 @@ }; i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; }; - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; + }; - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <5 1 0 0>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupts = <5 1 0 0>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupts = <5 1 0 0>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupts = <5 1 0 0>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; + }; - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi2>; phy-handle = <&phy2>; + }; - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; enet3: ethernet@27000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <3>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x27000 0x1000>; - ranges = <0x0 0x27000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <37 2 38 2 39 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi3>; phy-handle = <&phy3>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <42 2>; - interrupt-parent = <&mpic>; }; - global-utilities@e0000 { //global utilities reg - compatible = "fsl,mpc8548-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - crypto@30000 { - compatible = "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xfe>; - fsl,descriptor-types-mask = <0x12b0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; }; pci0: pci@e0008000 { + reg = <0 0xe0008000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x4 (PCIX Slot 2) */ - 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0x5 (PCIX Slot 3) */ - 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 - 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 - 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 - 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 + 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 + 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 /* IDSEL 0x6 (PCIX Slot 4) */ - 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 - 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 /* IDSEL 0x8 (PCIX Slot 5) */ - 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0xC (Tsi310 bridge) */ - 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0x14 (Slot 2) */ - 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0x15 (Slot 3) */ - 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 - 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 - 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 - 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 + 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 /* IDSEL 0x16 (Slot 4) */ - 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 - 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 - 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 - 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 + 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 /* IDSEL 0x18 (Slot 5) */ - 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ - 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <24 2>; - bus-range = <0 0>; - ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008000 0x1000>; - compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; - device_type = "pci"; + 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; pci_bridge@1c { interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x00 (PrPMC Site) */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0x04 (VIA chip) */ - 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 /* IDSEL 0x05 (8139) */ - 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 /* IDSEL 0x06 (Slot 6) */ - 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 - 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 /* IDESL 0x07 (Slot 7) */ - 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 - 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>; + 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0 + 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>; reg = <0xe000 0x0 0x0 0x0 0x0>; #interrupt-cells = <1>; @@ -492,7 +260,7 @@ #address-cells = <0>; #interrupt-cells = <2>; compatible = "chrp,iic"; - interrupts = <0 1>; + interrupts = <0 1 0 0>; interrupt-parent = <&mpic>; }; @@ -505,56 +273,25 @@ }; pci1: pci@e0009000 { + reg = <0 0xe0009000 0 0x1000>; + ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>; + clock-frequency = <66666666>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x15 */ - 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 - 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <25 2>; - bus-range = <0 0>; - ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000 - 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0009000 0x1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; }; pci2: pcie@e000a000 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x0 (PEX) */ - 00000 0x0 0x0 0x1 &mpic 0x0 0x1 - 00000 0x0 0x0 0x2 &mpic 0x1 0x1 - 00000 0x0 0x0 0x3 &mpic 0x2 0x1 - 00000 0x0 0x0 0x4 &mpic 0x3 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <26 2>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; - clock-frequency = <33333333>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe000a000 0x1000>; - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; + reg = <0 0xe000a000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000 @@ -565,3 +302,5 @@ }; }; }; + +/include/ "fsl/mpc8548si-post.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 5c5614f9eb17..fe10438613d6 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -209,7 +209,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; @@ -219,7 +219,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 647daf8e7291..09598bb5d443 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -9,60 +9,25 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/mpc8568si-pre.dtsi" / { model = "MPC8568EMDS"; compatible = "MPC8568EMDS", "MPC85xxMDS"; - #address-cells = <1>; - #size-cells = <1>; aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - ethernet3 = &enet3; - serial0 = &serial0; - serial1 = &serial1; pci0 = &pci0; pci1 = &pci1; - rapidio0 = &rio0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8568@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - sleep = <&pmc 0x00008000 // core - &pmc 0x00004000>; // timebase - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; + rapidio0 = &rio; }; memory { device_type = "memory"; - reg = <0x0 0x10000000>; + reg = <0x0 0x0 0x0 0x0>; }; - localbus@e0005000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", - "simple-bus"; - reg = <0xe0005000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <19 2>; - + lbc: localbus@e0005000 { + reg = <0x0 0xe0005000 0x0 0x1000>; ranges = <0x0 0x0 0xfe000000 0x02000000 0x1 0x0 0xf8000000 0x00008000 0x2 0x0 0xf0000000 0x04000000 @@ -104,288 +69,65 @@ }; }; - soc8568@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xe0000000 0x100000>; - bus-frequency = <0>; - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - ecm@1000 { - compatible = "fsl,mpc8568-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8568-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8568-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2, 512K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; + soc: soc8568@e0000000 { + ranges = <0x0 0x0 0xe0000000 0x100000>; i2c-sleep-nexus { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - sleep = <&pmc 0x00000004>; - ranges; - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - rtc@68 { compatible = "dallas,ds1374"; reg = <0x68>; - interrupts = <3 1>; - interrupt-parent = <&mpic>; + interrupts = <3 1 0 0>; }; }; + }; - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; }; - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8568-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - sleep = <&pmc 0x00000400>; - - dma-channel@0 { - compatible = "fsl,mpc8568-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; + mdio@24520 { + phy0: ethernet-phy@7 { + interrupts = <1 1 0 0>; + reg = <0x7>; + device_type = "ethernet-phy"; }; - dma-channel@80 { - compatible = "fsl,mpc8568-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + device_type = "ethernet-phy"; }; - dma-channel@100 { - compatible = "fsl,mpc8568-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; + phy2: ethernet-phy@2 { + interrupts = <1 1 0 0>; + reg = <0x2>; + device_type = "ethernet-phy"; }; - dma-channel@180 { - compatible = "fsl,mpc8568-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; + phy3: ethernet-phy@3 { + interrupts = <2 1 0 0>; + reg = <0x3>; + device_type = "ethernet-phy"; }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy2>; - sleep = <&pmc 0x00000080>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@7 { - interrupt-parent = <&mpic>; - interrupts = <1 1>; - reg = <0x7>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <2 1>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <1 1>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <2 1>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy3>; sleep = <&pmc 0x00000040>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; }; - duart-sleep-nexus { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - sleep = <&pmc 0x00000002>; - ranges; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; - global-utilities@e0000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts"; - reg = <0xe0000 0x1000>; - ranges = <0 0xe0000 0x1000>; - fsl,has-rstcr; - - pmc: power@70 { - compatible = "fsl,mpc8568-pmc", - "fsl,mpc8548-pmc"; - reg = <0x70 0x20>; - }; - }; - - crypto@30000 { - compatible = "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xfe>; - fsl,descriptor-types-mask = <0x12b0ebf>; - sleep = <&pmc 0x01000000>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,mpc8568-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - par_io@e0100 { - reg = <0xe0100 0x100>; - device_type = "par_io"; num-ports = <7>; pio1: ucc_pin@01 { @@ -448,57 +190,21 @@ }; }; - qe@e0080000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "qe"; - compatible = "fsl,qe"; - ranges = <0x0 0xe0080000 0x40000>; - reg = <0xe0080000 0x480>; - sleep = <&pmc 0x00000800>; - brg-frequency = <0>; - bus-frequency = <396000000>; - fsl,qe-num-riscs = <2>; - fsl,qe-num-snums = <28>; - - muram@10000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,qe-muram", "fsl,cpm-muram"; - ranges = <0x0 0x10000 0x10000>; - - data-only@0 { - compatible = "fsl,qe-muram-data", - "fsl,cpm-muram-data"; - reg = <0x0 0x10000>; - }; - }; + qe: qe@e0080000 { + ranges = <0x0 0x0 0xe0080000 0x40000>; + reg = <0x0 0xe0080000 0x0 0x480>; spi@4c0 { - cell-index = <0>; - compatible = "fsl,spi"; - reg = <0x4c0 0x40>; - interrupts = <2>; - interrupt-parent = <&qeic>; mode = "cpu"; }; spi@500 { - cell-index = <1>; - compatible = "fsl,spi"; - reg = <0x500 0x40>; - interrupts = <1>; - interrupt-parent = <&qeic>; mode = "cpu"; }; enet2: ucc@2000 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <1>; - reg = <0x2000 0x200>; - interrupts = <32>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "clk16"; @@ -510,10 +216,6 @@ enet3: ucc@3000 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <2>; - reg = <0x3000 0x200>; - interrupts = <33>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "clk16"; @@ -532,102 +234,57 @@ * gianfar's MDIO bus */ qe_phy0: ethernet-phy@07 { interrupt-parent = <&mpic>; - interrupts = <1 1>; + interrupts = <1 1 0 0>; reg = <0x7>; device_type = "ethernet-phy"; }; qe_phy1: ethernet-phy@01 { interrupt-parent = <&mpic>; - interrupts = <2 1>; + interrupts = <2 1 0 0>; reg = <0x1>; device_type = "ethernet-phy"; }; qe_phy2: ethernet-phy@02 { interrupt-parent = <&mpic>; - interrupts = <1 1>; + interrupts = <1 1 0 0>; reg = <0x2>; device_type = "ethernet-phy"; }; qe_phy3: ethernet-phy@03 { interrupt-parent = <&mpic>; - interrupts = <2 1>; + interrupts = <2 1 0 0>; reg = <0x3>; device_type = "ethernet-phy"; }; }; - - qeic: interrupt-controller@80 { - interrupt-controller; - compatible = "fsl,qe-ic"; - #address-cells = <0>; - #interrupt-cells = <1>; - reg = <0x80 0x80>; - big-endian; - interrupts = <46 2 46 2>; //high:30 low:30 - interrupt-parent = <&mpic>; - }; - }; pci0: pci@e0008000 { + reg = <0x0 0xe0008000 0x0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x12 AD18 */ - 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 - 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 - 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 - 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 + 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0 + 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0 + 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0 + 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0 /* IDSEL 0x13 AD19 */ - 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 - 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 - 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <24 2>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>; - sleep = <&pmc 0x80000000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008000 0x1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; + 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0 + 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0 + 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>; }; /* PCI Express */ pci1: pcie@e000a000 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x0 (PEX) */ - 00000 0x0 0x0 0x1 &mpic 0x0 0x1 - 00000 0x0 0x0 0x2 &mpic 0x1 0x1 - 00000 0x0 0x0 0x3 &mpic 0x2 0x1 - 00000 0x0 0x0 0x4 &mpic 0x3 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <26 2>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 - 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>; - sleep = <&pmc 0x20000000>; - clock-frequency = <33333333>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe000a000 0x1000>; - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; + ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>; + reg = <0x0 0xe000a000 0x0 0x1000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x10000000 @@ -638,22 +295,11 @@ }; }; - rio0: rapidio@e00c00000 { - #address-cells = <2>; - #size-cells = <2>; - compatible = "fsl,mpc8568-rapidio", "fsl,rapidio-delta"; - reg = <0xe00c0000 0x20000>; - ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>; - interrupts = <48 2 /* error */ - 49 2 /* bell_outb */ - 50 2 /* bell_inb */ - 53 2 /* msg1_tx */ - 54 2 /* msg1_rx */ - 55 2 /* msg2_tx */ - 56 2 /* msg2_rx */>; - interrupt-parent = <&mpic>; - sleep = <&pmc 0x00080000 /* controller */ - &pmc 0x00040000>; /* message unit */ + rio: rapidio@e00c00000 { + reg = <0x0 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; + }; }; leds { @@ -672,3 +318,5 @@ }; }; }; + +/include/ "fsl/mpc8568si-post.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index 8b72eaff5b03..7e283c891b7f 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -9,66 +9,36 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/mpc8569si-pre.dtsi" / { model = "MPC8569EMDS"; compatible = "fsl,MPC8569EMDS"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; aliases { - serial0 = &serial0; - serial1 = &serial1; - ethernet0 = &enet0; - ethernet1 = &enet1; ethernet2 = &enet2; ethernet3 = &enet3; ethernet5 = &enet5; ethernet7 = &enet7; - pci1 = &pci1; - rapidio0 = &rio0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8569@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - sleep = <&pmc 0x00008000 // core - &pmc 0x00004000>; // timebase - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; + rapidio0 = &rio; }; memory { device_type = "memory"; }; - localbus@e0005000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus"; - reg = <0xe0005000 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; - sleep = <&pmc 0x08000000>; - - ranges = <0x0 0x0 0xfe000000 0x02000000 - 0x1 0x0 0xf8000000 0x00008000 - 0x2 0x0 0xf0000000 0x04000000 - 0x3 0x0 0xfc000000 0x00008000 - 0x4 0x0 0xf8008000 0x00008000 - 0x5 0x0 0xf8010000 0x00008000>; + lbc: localbus@e0005000 { + reg = <0x0 0xe0005000 0x0 0x1000>; + + ranges = <0x0 0x0 0x0 0xfe000000 0x02000000 + 0x1 0x0 0x0 0xf8000000 0x00008000 + 0x2 0x0 0x0 0xf0000000 0x04000000 + 0x3 0x0 0x0 0xfc000000 0x00008000 + 0x4 0x0 0x0 0xf8008000 0x00008000 + 0x5 0x0 0x0 0xf8010000 0x00008000>; nor@0,0 { #address-cells = <1>; @@ -133,220 +103,25 @@ }; }; - soc@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,mpc8569-immr", "simple-bus"; - ranges = <0x0 0xe0000000 0x100000>; - bus-frequency = <0>; - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - ecm@1000 { - compatible = "fsl,mpc8569-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8569-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; + soc: soc@e0000000 { + ranges = <0x0 0x0 0xe0000000 0x100000>; i2c-sleep-nexus { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - sleep = <&pmc 0x00000004>; - ranges; - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - rtc@68 { compatible = "dallas,ds1374"; reg = <0x68>; - interrupts = <3 1>; - interrupt-parent = <&mpic>; + interrupts = <3 1 0 0>; }; }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - }; - - duart-sleep-nexus { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - sleep = <&pmc 0x00000002>; - ranges; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8569-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2, 512K - interrupt-parent = <&mpic>; - interrupts = <16 2>; }; - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8569-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8569-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8569-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8569-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8569-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - sdhci@2e000 { - compatible = "fsl,mpc8569-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x8>; - interrupt-parent = <&mpic>; - sleep = <&pmc 0x00200000>; - /* Filled in by U-Boot */ - clock-frequency = <0>; + sdhc@2e000 { status = "disabled"; sdhci,1-bit-only; }; - crypto@30000 { - compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", - "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xbfe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - sleep = <&pmc 0x01000000>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,mpc8568-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts"; - reg = <0xe0000 0x1000>; - ranges = <0 0xe0000 0x1000>; - fsl,has-rstcr; - - pmc: power@70 { - compatible = "fsl,mpc8569-pmc", - "fsl,mpc8548-pmc"; - reg = <0x70 0x20>; - }; - }; - par_io@e0100 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xe0100 0x100>; - ranges = <0x0 0xe0100 0x100>; - device_type = "par_io"; num-ports = <7>; qe_pio_e: gpio-controller@80 { @@ -447,47 +222,11 @@ }; }; - qe@e0080000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "qe"; - compatible = "fsl,qe"; - ranges = <0x0 0xe0080000 0x40000>; - reg = <0xe0080000 0x480>; - sleep = <&pmc 0x00000800>; - brg-frequency = <0>; - bus-frequency = <0>; - fsl,qe-num-riscs = <4>; - fsl,qe-num-snums = <46>; - - qeic: interrupt-controller@80 { - interrupt-controller; - compatible = "fsl,qe-ic"; - #address-cells = <0>; - #interrupt-cells = <1>; - reg = <0x80 0x80>; - interrupts = <46 2 46 2>; //high:30 low:30 - interrupt-parent = <&mpic>; - }; - - timer@440 { - compatible = "fsl,mpc8569-qe-gtm", - "fsl,qe-gtm", "fsl,gtm"; - reg = <0x440 0x40>; - interrupts = <12 13 14 15>; - interrupt-parent = <&qeic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; + qe: qe@e0080000 { + ranges = <0x0 0x0 0xe0080000 0x40000>; + reg = <0x0 0xe0080000 0x0 0x480>; spi@4c0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc8569-qe-spi", "fsl,spi"; - reg = <0x4c0 0x40>; - cell-index = <0>; - interrupts = <2>; - interrupt-parent = <&qeic>; gpios = <&qe_pio_e 30 0>; mode = "cpu-qe"; @@ -499,20 +238,10 @@ }; spi@500 { - cell-index = <1>; - compatible = "fsl,spi"; - reg = <0x500 0x40>; - interrupts = <1>; - interrupt-parent = <&qeic>; mode = "cpu"; }; usb@6c0 { - compatible = "fsl,mpc8569-qe-usb", - "fsl,mpc8323-qe-usb"; - reg = <0x6c0 0x40 0x8b00 0x100>; - interrupts = <11>; - interrupt-parent = <&qeic>; fsl,fullspeed-clock = "clk5"; fsl,lowspeed-clock = "brg10"; gpios = <&qe_pio_f 3 0 /* USBOE */ @@ -527,10 +256,6 @@ enet0: ucc@2000 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <1>; - reg = <0x2000 0x200>; - interrupts = <32>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "clk12"; @@ -548,35 +273,33 @@ qe_phy0: ethernet-phy@07 { interrupt-parent = <&mpic>; - interrupts = <1 1>; + interrupts = <1 1 0 0>; reg = <0x7>; device_type = "ethernet-phy"; }; qe_phy1: ethernet-phy@01 { interrupt-parent = <&mpic>; - interrupts = <2 1>; + interrupts = <2 1 0 0>; reg = <0x1>; device_type = "ethernet-phy"; }; qe_phy2: ethernet-phy@02 { interrupt-parent = <&mpic>; - interrupts = <3 1>; + interrupts = <3 1 0 0>; reg = <0x2>; device_type = "ethernet-phy"; }; qe_phy3: ethernet-phy@03 { interrupt-parent = <&mpic>; - interrupts = <4 1>; + interrupts = <4 1 0 0>; reg = <0x3>; device_type = "ethernet-phy"; }; qe_phy5: ethernet-phy@04 { - interrupt-parent = <&mpic>; reg = <0x04>; device_type = "ethernet-phy"; }; qe_phy7: ethernet-phy@06 { - interrupt-parent = <&mpic>; reg = <0x6>; device_type = "ethernet-phy"; }; @@ -610,10 +333,6 @@ enet2: ucc@2200 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <3>; - reg = <0x2200 0x200>; - interrupts = <34>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "clk12"; @@ -637,10 +356,6 @@ enet1: ucc@3000 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <2>; - reg = <0x3000 0x200>; - interrupts = <33>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "clk17"; @@ -664,10 +379,6 @@ enet3: ucc@3200 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <4>; - reg = <0x3200 0x200>; - interrupts = <35>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "clk17"; @@ -691,10 +402,6 @@ enet5: ucc@3400 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <6>; - reg = <0x3400 0x200>; - interrupts = <41>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "none"; @@ -706,10 +413,6 @@ enet7: ucc@3600 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <8>; - reg = <0x3600 0x200>; - interrupts = <43>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "none"; @@ -717,50 +420,14 @@ phy-handle = <&qe_phy7>; phy-connection-type = "sgmii"; }; - - muram@10000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,qe-muram", "fsl,cpm-muram"; - ranges = <0x0 0x10000 0x20000>; - - data-only@0 { - compatible = "fsl,qe-muram-data", - "fsl,cpm-muram-data"; - reg = <0x0 0x20000>; - }; - }; - }; /* PCI Express */ pci1: pcie@e000a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe000a000 0x1000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 (PEX) */ - 00000 0x0 0x0 0x1 &mpic 0x0 0x1 - 00000 0x0 0x0 0x2 &mpic 0x1 0x1 - 00000 0x0 0x0 0x3 &mpic 0x2 0x1 - 00000 0x0 0x0 0x4 &mpic 0x3 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <26 2>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 - 0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>; - sleep = <&pmc 0x20000000>; - clock-frequency = <33333333>; + reg = <0x0 0xe000a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x00800000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x10000000 @@ -771,20 +438,15 @@ }; }; - rio0: rapidio@e00c00000 { - #address-cells = <2>; - #size-cells = <2>; - compatible = "fsl,mpc8569-rapidio", "fsl,rapidio-delta"; - reg = <0xe00c0000 0x20000>; - ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>; - interrupts = <48 2 /* error */ - 49 2 /* bell_outb */ - 50 2 /* bell_inb */ - 53 2 /* msg1_tx */ - 54 2 /* msg1_rx */ - 55 2 /* msg2_tx */ - 56 2 /* msg2_rx */>; - interrupt-parent = <&mpic>; - sleep = <&pmc 0x00080000>; + rio: rapidio@e00c00000 { + reg = <0x0 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; + }; + port2 { + status = "disabled"; + }; }; }; + +/include/ "fsl/mpc8569si-post.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index f6c04d25e916..0c9f2955deb4 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -9,67 +9,18 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/mpc8572si-pre.dtsi" + / { model = "fsl,MPC8572DS"; compatible = "fsl,MPC8572DS"; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - ethernet3 = &enet3; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8572@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; - - PowerPC,8572@1 { - device_type = "cpu"; - reg = <0x1>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; - }; memory { device_type = "memory"; }; - localbus@ffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + board_lbc: lbc: localbus@ffe05000 { reg = <0 0xffe05000 0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 0x1 0x0 0x0 0xe0000000 0x08000000 @@ -78,601 +29,17 @@ 0x4 0x0 0x0 0xffa40000 0x00040000 0x5 0x0 0x0 0xffa80000 0x00040000 0x6 0x0 0x0 0xffac0000 0x00040000>; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x8000000>; - bank-width = <2>; - device-width = <1>; - - ramdisk@0 { - reg = <0x0 0x03000000>; - read-only; - }; - - diagnostic@3000000 { - reg = <0x03000000 0x00e00000>; - read-only; - }; - - dink@3e00000 { - reg = <0x03e00000 0x00200000>; - read-only; - }; - - kernel@4000000 { - reg = <0x04000000 0x00400000>; - read-only; - }; - - jffs2@4400000 { - reg = <0x04400000 0x03b00000>; - }; - - dtb@7f00000 { - reg = <0x07f00000 0x00080000>; - read-only; - }; - - u-boot@7f80000 { - reg = <0x07f80000 0x00080000>; - read-only; - }; - }; - - nand@2,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x2 0x0 0x40000>; - - u-boot@0 { - reg = <0x0 0x02000000>; - read-only; - }; - - jffs2@2000000 { - reg = <0x02000000 0x10000000>; - }; - - ramdisk@12000000 { - reg = <0x12000000 0x08000000>; - read-only; - }; - - kernel@1a000000 { - reg = <0x1a000000 0x04000000>; - }; - - dtb@1e000000 { - reg = <0x1e000000 0x01000000>; - read-only; - }; - - empty@1f000000 { - reg = <0x1f000000 0x21000000>; - }; - }; - - nand@4,0 { - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x4 0x0 0x40000>; - }; - - nand@5,0 { - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x5 0x0 0x40000>; - }; - - nand@6,0 { - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x6 0x0 0x40000>; - }; }; - soc8572@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; + board_soc: soc: soc8572@ffe00000 { ranges = <0x0 0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,mpc8572-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8572-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - memory-controller@6000 { - compatible = "fsl,mpc8572-memory-controller"; - reg = <0x6000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8572-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x100000>; // L2, 1M - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; - reg = <0xc300 0x4>; - ranges = <0x0 0xc100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <76 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <77 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <78 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <79 2>; - }; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - ptp_clock@24E00 { - compatible = "fsl,etsec-ptp"; - reg = <0x24E00 0xB0>; - interrupts = <68 2 69 2 70 2 71 2>; - interrupt-parent = < &mpic >; - fsl,tclk-period = <5>; - fsl,tmr-prsc = <200>; - fsl,tmr-add = <0xAAAAAAAB>; - fsl,tmr-fiper1 = <0x3B9AC9FB>; - fsl,tmr-fiper2 = <0x3B9AC9FB>; - fsl,max-adj = <499999999>; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x2>; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x3>; - }; - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet3: ethernet@27000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <3>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x27000 0x1000>; - ranges = <0x0 0x27000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <37 2 38 2 39 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi3>; - phy-handle = <&phy3>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,mpc8572-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - msi@41600 { - compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - crypto@30000 { - compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", - "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x9fe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; }; - pci0: pcie@ffe08000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; + board_pci0: pci0: pcie@ffe08000 { reg = <0 0xffe08000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; - interrupt-map-mask = <0xff00 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x11 func 0 - PCI slot 1 */ - 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 1 - PCI slot 1 */ - 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 2 - PCI slot 1 */ - 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 3 - PCI slot 1 */ - 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 4 - PCI slot 1 */ - 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 5 - PCI slot 1 */ - 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 6 - PCI slot 1 */ - 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 7 - PCI slot 1 */ - 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x12 func 0 - PCI slot 2 */ - 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 1 - PCI slot 2 */ - 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 2 - PCI slot 2 */ - 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 3 - PCI slot 2 */ - 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 4 - PCI slot 2 */ - 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 5 - PCI slot 2 */ - 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 6 - PCI slot 2 */ - 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 7 - PCI slot 2 */ - 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 - - // IDSEL 0x1c USB - 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 - 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 - 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 - 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 - - // IDSEL 0x1d Audio - 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 - - // IDSEL 0x1e Legacy - 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 - 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 - - // IDSEL 0x1f IDE/SATA - 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 - 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 - - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 @@ -680,99 +47,14 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 0x0 0x10000>; - uli1575@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - isa@1e { - device_type = "isa"; - #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <0xf000 0x0 0x0 0x0 0x0>; - ranges = <0x1 0x0 0x1000000 0x0 0x0 - 0x1000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - reg = <0x1 0x20 0x2 - 0x1 0xa0 0x2 - 0x1 0x4d0 0x2>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = <&mpic>; - }; - - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <0x1 0x60 0x1 0x1 0x64 0x1>; - interrupts = <1 3 12 3>; - interrupt-parent = - <&i8259>; - - keyboard@0 { - reg = <0x0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <0x1>; - compatible = "pnpPNP,f03"; - }; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <0x1 0x70 0x2>; - }; - - gpio@400 { - reg = <0x1 0x400 0x80>; - }; - }; - }; }; - }; pci1: pcie@ffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xffe09000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000 @@ -784,31 +66,10 @@ }; pci2: pcie@ffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xffe0a000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xc0000000 0x2000000 0x0 0xc0000000 0x0 0x20000000 @@ -819,3 +80,11 @@ }; }; }; + +/* + * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "fsl/mpc8572si-post.dtsi" +/include/ "mpc8572ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8572ds.dtsi b/arch/powerpc/boot/dts/mpc8572ds.dtsi new file mode 100644 index 000000000000..c3d4fac0532a --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8572ds.dtsi @@ -0,0 +1,397 @@ +/* + * MPC8572DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + ramdisk@0 { + reg = <0x0 0x03000000>; + read-only; + }; + + diagnostic@3000000 { + reg = <0x03000000 0x00e00000>; + read-only; + }; + + dink@3e00000 { + reg = <0x03e00000 0x00200000>; + read-only; + }; + + kernel@4000000 { + reg = <0x04000000 0x00400000>; + read-only; + }; + + jffs2@4400000 { + reg = <0x04400000 0x03b00000>; + }; + + dtb@7f00000 { + reg = <0x07f00000 0x00080000>; + read-only; + }; + + u-boot@7f80000 { + reg = <0x07f80000 0x00080000>; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + u-boot@0 { + reg = <0x0 0x02000000>; + read-only; + }; + + jffs2@2000000 { + reg = <0x02000000 0x10000000>; + }; + + ramdisk@12000000 { + reg = <0x12000000 0x08000000>; + read-only; + }; + + kernel@1a000000 { + reg = <0x1a000000 0x04000000>; + }; + + dtb@1e000000 { + reg = <0x1e000000 0x01000000>; + read-only; + }; + + empty@1f000000 { + reg = <0x1f000000 0x21000000>; + }; + }; + + nand@4,0 { + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x4 0x0 0x40000>; + }; + + nand@5,0 { + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x5 0x0 0x40000>; + }; + + nand@6,0 { + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x6 0x0 0x40000>; + }; +}; + +&board_soc { + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <10 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <10 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <10 1 0 0>; + reg = <0x2>; + }; + phy3: ethernet-phy@3 { + interrupts = <10 1 0 0>; + reg = <0x3>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xAAAAAAAB>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x3B9AC9FB>; + fsl,max-adj = <499999999>; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + + }; + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@27000 { + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + }; + + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; +}; + +&board_pci0 { + pcie@0 { + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x11 func 0 - PCI slot 1 */ + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 1 - PCI slot 1 */ + 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 2 - PCI slot 1 */ + 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 3 - PCI slot 1 */ + 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 4 - PCI slot 1 */ + 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 5 - PCI slot 1 */ + 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 6 - PCI slot 1 */ + 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 7 - PCI slot 1 */ + 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x12 func 0 - PCI slot 2 */ + 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 1 - PCI slot 2 */ + 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 2 - PCI slot 2 */ + 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 3 - PCI slot 2 */ + 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 4 - PCI slot 2 */ + 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 5 - PCI slot 2 */ + 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 6 - PCI slot 2 */ + 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 7 - PCI slot 2 */ + 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + // IDSEL 0x1c USB + 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 + 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 + 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 + 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 + + // IDSEL 0x1d Audio + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 + + // IDSEL 0x1e Legacy + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 + >; + + + uli1575@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <9 2 0 0>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0x0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <0x1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + + gpio@400 { + reg = <0x1 0x400 0x80>; + }; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/mpc8572ds_36b.dts index f6365db3b97d..6c3d0b305e1b 100644 --- a/arch/powerpc/boot/dts/mpc8572ds_36b.dts +++ b/arch/powerpc/boot/dts/mpc8572ds_36b.dts @@ -1,5 +1,5 @@ /* - * MPC8572 DS Device Tree Source + * MPC8572DS Device Tree Source (36-bit address map) * * Copyright 2007-2009 Freescale Semiconductor Inc. * @@ -9,67 +9,18 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/mpc8572si-pre.dtsi" + / { model = "fsl,MPC8572DS"; compatible = "fsl,MPC8572DS"; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - ethernet3 = &enet3; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8572@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; - - PowerPC,8572@1 { - device_type = "cpu"; - reg = <0x1>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; - }; memory { device_type = "memory"; }; - localbus@fffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + board_lbc: lbc: localbus@fffe05000 { reg = <0xf 0xffe05000 0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 0x1 0x0 0xf 0xe0000000 0x08000000 @@ -78,588 +29,17 @@ 0x4 0x0 0xf 0xffa40000 0x00040000 0x5 0x0 0xf 0xffa80000 0x00040000 0x6 0x0 0xf 0xffac0000 0x00040000>; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x8000000>; - bank-width = <2>; - device-width = <1>; - - ramdisk@0 { - reg = <0x0 0x03000000>; - read-only; - }; - - diagnostic@3000000 { - reg = <0x03000000 0x00e00000>; - read-only; - }; - - dink@3e00000 { - reg = <0x03e00000 0x00200000>; - read-only; - }; - - kernel@4000000 { - reg = <0x04000000 0x00400000>; - read-only; - }; - - jffs2@4400000 { - reg = <0x04400000 0x03b00000>; - }; - - dtb@7f00000 { - reg = <0x07f00000 0x00080000>; - read-only; - }; - - u-boot@7f80000 { - reg = <0x07f80000 0x00080000>; - read-only; - }; - }; - - nand@2,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x2 0x0 0x40000>; - - u-boot@0 { - reg = <0x0 0x02000000>; - read-only; - }; - - jffs2@2000000 { - reg = <0x02000000 0x10000000>; - }; - - ramdisk@12000000 { - reg = <0x12000000 0x08000000>; - read-only; - }; - - kernel@1a000000 { - reg = <0x1a000000 0x04000000>; - }; - - dtb@1e000000 { - reg = <0x1e000000 0x01000000>; - read-only; - }; - - empty@1f000000 { - reg = <0x1f000000 0x21000000>; - }; - }; - - nand@4,0 { - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x4 0x0 0x40000>; - }; - - nand@5,0 { - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x5 0x0 0x40000>; - }; - - nand@6,0 { - compatible = "fsl,mpc8572-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x6 0x0 0x40000>; - }; }; - soc8572@fffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; + board_soc: soc: soc8572@fffe00000 { ranges = <0x0 0xf 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,mpc8572-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8572-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - memory-controller@6000 { - compatible = "fsl,mpc8572-memory-controller"; - reg = <0x6000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8572-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x100000>; // L2, 1M - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; - reg = <0xc300 0x4>; - ranges = <0x0 0xc100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <76 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <77 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <78 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <79 2>; - }; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x2>; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x3>; - }; - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet3: ethernet@27000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <3>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x27000 0x1000>; - ranges = <0x0 0x27000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <37 2 38 2 39 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi3>; - phy-handle = <&phy3>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,mpc8572-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - msi@41600 { - compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - crypto@30000 { - compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", - "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x9fe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; }; - pci0: pcie@fffe08000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; + board_pci0: pci0: pcie@fffe08000 { reg = <0xf 0xffe08000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; - interrupt-map-mask = <0xff00 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x11 func 0 - PCI slot 1 */ - 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 1 - PCI slot 1 */ - 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 2 - PCI slot 1 */ - 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 3 - PCI slot 1 */ - 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 4 - PCI slot 1 */ - 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 5 - PCI slot 1 */ - 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 6 - PCI slot 1 */ - 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 7 - PCI slot 1 */ - 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x12 func 0 - PCI slot 2 */ - 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 1 - PCI slot 2 */ - 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 2 - PCI slot 2 */ - 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 3 - PCI slot 2 */ - 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 4 - PCI slot 2 */ - 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 5 - PCI slot 2 */ - 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 6 - PCI slot 2 */ - 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 7 - PCI slot 2 */ - 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 - - // IDSEL 0x1c USB - 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 - 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 - 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 - 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 - - // IDSEL 0x1d Audio - 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 - - // IDSEL 0x1e Legacy - 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 - 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 - - // IDSEL 0x1f IDE/SATA - 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 - 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 - - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 @@ -667,99 +47,14 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 0x0 0x10000>; - uli1575@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x2000000 0x0 0xe0000000 - 0x2000000 0x0 0xe0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - isa@1e { - device_type = "isa"; - #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <0xf000 0x0 0x0 0x0 0x0>; - ranges = <0x1 0x0 0x1000000 0x0 0x0 - 0x1000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - reg = <0x1 0x20 0x2 - 0x1 0xa0 0x2 - 0x1 0x4d0 0x2>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = <&mpic>; - }; - - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <0x1 0x60 0x1 0x1 0x64 0x1>; - interrupts = <1 3 12 3>; - interrupt-parent = - <&i8259>; - - keyboard@0 { - reg = <0x0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <0x1>; - compatible = "pnpPNP,f03"; - }; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <0x1 0x70 0x2>; - }; - - gpio@400 { - reg = <0x1 0x400 0x80>; - }; - }; - }; }; - }; pci1: pcie@fffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xffe09000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 @@ -771,31 +66,10 @@ }; pci2: pcie@fffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xffe0a000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 @@ -806,3 +80,11 @@ }; }; }; + +/* + * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "fsl/mpc8572si-post.dtsi" +/include/ "mpc8572ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts index 3375c2ab0c32..d34d12712125 100644 --- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts +++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts @@ -14,494 +14,69 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc8572ds.dts" + / { model = "fsl,MPC8572DS"; compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - pci0 = &pci0; - pci1 = &pci1; - }; cpus { - #address-cells = <1>; - #size-cells = <0>; - PowerPC,8572@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; }; - + PowerPC,8572@1 { + status = "disabled"; + }; }; - memory { - device_type = "memory"; - reg = <0x0 0x0>; // Filled by U-Boot + localbus@ffe05000 { + status = "disabled"; }; soc8572@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; + serial@4600 { + status = "disabled"; }; - - ecm@1000 { - compatible = "fsl,mpc8572-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; + dma@c300 { + status = "disabled"; }; - - memory-controller@2000 { - compatible = "fsl,mpc8572-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; + gpio-controller@f000 { }; - - memory-controller@6000 { - compatible = "fsl,mpc8572-memory-controller"; - reg = <0x6000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8572-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes + l2-cache-controller@20000 { cache-size = <0x80000>; // L2, 512K - interrupt-parent = <&mpic>; - interrupts = <16 2>; }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; + ethernet@26000 { + status = "disabled"; }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; + mdio@26520 { + status = "disabled"; }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; + ethernet@27000 { + status = "disabled"; }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x1>; - }; - }; + mdio@27520 { + status = "disabled"; }; - - enet1: ethernet@25000 { - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; + pic@40000 { + protected-sources = < + 31 32 33 37 38 39 /* enet2 enet3 */ + 76 77 78 79 26 42 /* dma2 pci2 serial*/ + 0xe4 0xe5 0xe6 0xe7 /* msi */ + >; }; msi@41600 { - compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; msi-available-ranges = <0 0x80>; interrupts = < 0xe0 0 0xe1 0 0xe2 0 0xe3 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,mpc8572-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - crypto@30000 { - compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", - "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x9fe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - protected-sources = < - 31 32 33 37 38 39 /* enet2 enet3 */ - 76 77 78 79 26 42 /* dma2 pci2 serial*/ - 0xe4 0xe5 0xe6 0xe7 /* msi */ - >; }; - }; - - pci0: pcie@ffe08000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xffe08000 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; - interrupt-map-mask = <0xff00 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x11 func 0 - PCI slot 1 */ - 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 1 - PCI slot 1 */ - 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 2 - PCI slot 1 */ - 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 3 - PCI slot 1 */ - 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 4 - PCI slot 1 */ - 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 5 - PCI slot 1 */ - 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 6 - PCI slot 1 */ - 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 func 7 - PCI slot 1 */ - 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x12 func 0 - PCI slot 2 */ - 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 1 - PCI slot 2 */ - 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 2 - PCI slot 2 */ - 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 3 - PCI slot 2 */ - 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 4 - PCI slot 2 */ - 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 5 - PCI slot 2 */ - 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 6 - PCI slot 2 */ - 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x12 func 7 - PCI slot 2 */ - 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 - - // IDSEL 0x1c USB - 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 - 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 - 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 - 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 - - // IDSEL 0x1d Audio - 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 - - // IDSEL 0x1e Legacy - 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 - 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 - - // IDSEL 0x1f IDE/SATA - 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 - 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 - - >; - - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - uli1575@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - isa@1e { - device_type = "isa"; - #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <0xf000 0x0 0x0 0x0 0x0>; - ranges = <0x1 0x0 0x1000000 0x0 0x0 - 0x1000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - reg = <0x1 0x20 0x2 - 0x1 0xa0 0x2 - 0x1 0x4d0 0x2>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = <&mpic>; - }; - - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <0x1 0x60 0x1 0x1 0x64 0x1>; - interrupts = <1 3 12 3>; - interrupt-parent = - <&i8259>; - - keyboard@0 { - reg = <0x0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <0x1>; - compatible = "pnpPNP,f03"; - }; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <0x1 0x70 0x2>; - }; - - gpio@400 { - reg = <0x1 0x400 0x80>; - }; - }; - }; + timer@42100 { + status = "disabled"; }; - }; - - pci1: pcie@ffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xffe09000 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - }; + pcie@ffe0a000 { + status = "disabled"; }; }; diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts index e7b477f6a3fe..d6a8fafc0d0d 100644 --- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts +++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts @@ -15,169 +15,74 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc8572ds.dts" + / { model = "fsl,MPC8572DS"; compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet2 = &enet2; - ethernet3 = &enet3; - serial0 = &serial0; - pci2 = &pci2; - }; cpus { - #address-cells = <1>; - #size-cells = <0>; - + PowerPC,8572@0 { + status = "disabled"; + }; PowerPC,8572@1 { - device_type = "cpu"; - reg = <0x1>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; }; }; - memory { - device_type = "memory"; - reg = <0x0 0x0>; // Filled by U-Boot + localbus@ffe05000 { + status = "disabled"; }; soc8572@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8572-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2, 512K - interrupt-parent = <&mpic>; + ecm-law@0 { + status = "disabled"; }; - - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; - reg = <0xc300 0x4>; - ranges = <0x0 0xc100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <76 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <77 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <78 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8572-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <79 2>; - }; + ecm@1000 { + status = "disabled"; + }; + memory-controller@2000 { + status = "disabled"; + }; + memory-controller@6000 { + status = "disabled"; + }; + i2c@3000 { + status = "disabled"; + }; + i2c@3100 { + status = "disabled"; + }; + serial@4500 { + status = "disabled"; + }; + gpio-controller@f000 { + status = "disabled"; + }; + l2-cache-controller@20000 { + cache-size = <0x80000>; // L2, 512K + }; + dma@21300 { + status = "disabled"; + }; + ethernet@24000 { + status = "disabled"; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - reg = <0x2>; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - reg = <0x3>; - }; + status = "disabled"; }; - - enet2: ethernet@26000 { - cell-index = <2>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy2>; - phy-connection-type = "rgmii-id"; + ptp_clock@24e00 { + status = "disabled"; }; - - enet3: ethernet@27000 { - cell-index = <3>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x27000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <37 2 38 2 39 2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy3>; - phy-connection-type = "rgmii-id"; + ethernet@25000 { + status = "disabled"; }; - - msi@41600 { - compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0x80 0x80>; - interrupts = < - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; + mdio@25520 { + status = "disabled"; }; - - serial0: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; + crypto@30000 { + status = "disabled"; }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; + pic@40000 { protected-sources = < 18 16 10 42 45 58 /* MEM L2 mdio serial crypto */ 29 30 34 35 36 40 /* enet0 enet1 */ @@ -189,41 +94,25 @@ 0xe0 0xe1 0xe2 0xe3 /* msi */ >; }; - }; - - pci2: pcie@ffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xffe0a000 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0xc0000000 - 0x2000000 0x0 0xc0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; + timer@41100 { + status = "disabled"; }; + msi@41600 { + msi-available-ranges = <0x80 0x80>; + interrupts = < + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + }; + global-utilities@e0000 { + status = "disabled"; + }; + }; + pcie@ffe08000 { + status = "disabled"; + }; + pcie@ffe09000 { + status = "disabled"; }; }; diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 83c3218cb4da..6a109a0ceac9 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -175,7 +175,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; @@ -186,7 +186,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 848320e4d3c4..1e8666ccbed8 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -26,13 +26,6 @@ serial1 = &serial1; pci0 = &pci0; pci1 = &pci1; -/* - * Only one of Rapid IO or PCI can be present due to HW limitations and - * due to the fact that the 2 now share address space in the new memory - * map. The most likely case is that we have PCI, so comment out the - * rapidio node. Leave it here for reference. - */ - /* rapidio0 = &rapidio0; */ }; cpus { @@ -335,7 +328,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; @@ -345,7 +338,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <28 2>; @@ -361,6 +354,41 @@ device_type = "open-pic"; }; + rmu: rmu@d3000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,srio-rmu"; + reg = <0xd3000 0x500>; + ranges = <0x0 0xd3000 0x500>; + + message-unit@0 { + compatible = "fsl,srio-msg-unit"; + reg = <0x0 0x100>; + interrupts = < + 53 2 /* msg1_tx_irq */ + 54 2>;/* msg1_rx_irq */ + }; + message-unit@100 { + compatible = "fsl,srio-msg-unit"; + reg = <0x100 0x100>; + interrupts = < + 55 2 /* msg2_tx_irq */ + 56 2>;/* msg2_rx_irq */ + }; + doorbell-unit@400 { + compatible = "fsl,srio-dbell-unit"; + reg = <0x400 0x80>; + interrupts = < + 49 2 /* bell_outb_irq */ + 50 2>;/* bell_inb_irq */ + }; + port-write-unit@4e0 { + compatible = "fsl,srio-port-write-unit"; + reg = <0x4e0 0x20>; + interrupts = <48 2>; + }; + }; + global-utilities@e0000 { compatible = "fsl,mpc8641-guts"; reg = <0xe0000 0x1000>; @@ -612,16 +640,27 @@ }; }; /* - rapidio0: rapidio@ffec0000 { + * Only one of Rapid IO or PCI can be present due to HW limitations and + * due to the fact that the 2 now share address space in the new memory + * map. The most likely case is that we have PCI, so comment out the + * rapidio node. Leave it here for reference. + + rapidio@ffec0000 { + reg = <0xffec0000 0x11000>; + compatible = "fsl,srio"; + interrupt-parent = <&mpic>; + interrupts = <48 2>; #address-cells = <2>; #size-cells = <2>; - compatible = "fsl,rapidio-delta"; - reg = <0xffec0000 0x20000>; - ranges = <0 0 0x80000000 0 0x20000000>; - interrupt-parent = <&mpic>; - // err_irq bell_outb_irq bell_inb_irq - // msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq - interrupts = <48 2 49 2 50 2 53 2 54 2 55 2 56 2>; + fsl,srio-rmu-handle = <&rmu>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + ranges = <0 0 0x80000000 0 0x20000000>; + }; }; */ diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts index 8be8e701e1d3..fd4cd4da60b5 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts @@ -328,7 +328,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; @@ -338,7 +338,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <28 2>; diff --git a/arch/powerpc/boot/dts/obs600.dts b/arch/powerpc/boot/dts/obs600.dts new file mode 100644 index 000000000000..18e7d79ee4c3 --- /dev/null +++ b/arch/powerpc/boot/dts/obs600.dts @@ -0,0 +1,314 @@ +/* + * Device Tree Source for PlatHome OpenBlockS 600 (405EX) + * + * Copyright 2011 Ben Herrenschmidt, IBM Corp. + * + * Based on Kilauea by: + * + * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "PlatHome,OpenBlockS 600"; + compatible = "plathome,obs600"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405EX"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; /* 16 kB */ + d-cache-size = <16384>; /* 16 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic-405ex", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + CPM0: cpm { + compatible = "ibm,cpm"; + dcr-access-method = "native"; + dcr-reg = <0x0b0 0x003>; + unused-units = <0x00000000>; + idle-doze = <0x02000000>; + standby = <0xe3e74800>; + }; + + plb { + compatible = "ibm,plb-405ex", "ibm,plb4"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; + dcr-reg = <0x010 0x002>; + interrupt-parent = <&UIC2>; + interrupts = <0x5 0x4 /* ECC DED Error */ + 0x6 0x4>; /* ECC SEC Error */ + }; + + CRYPTO: crypto@ef700000 { + compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto"; + reg = <0xef700000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x17 0x2>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + interrupt-map-mask = <0xffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-405ex", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x80000000 0x80000000 0x10000000 + 0xef600000 0xef600000 0x00a00000 + 0xf0000000 0xf0000000 0x10000000>; + dcr-reg = <0x0a0 0x005>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-405ex", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x08000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel + initrd"; + reg = <0x00000000 0x03de0000>; + }; + partition@3de0000 { + label = "user config area"; + reg = <0x03de0000 0x00080000>; + }; + partition@3e60000 { + label = "user program area"; + reg = <0x03e60000 0x04000000>; + }; + partition@7e60000 { + label = "flat device tree"; + reg = <0x07e60000 0x00080000>; + }; + partition@7ee0000 { + label = "test program"; + reg = <0x07ee0000 0x00080000>; + }; + partition@7f60000 { + label = "u-boot env"; + reg = <0x07f60000 0x00040000>; + }; + partition@7fa0000 { + label = "u-boot"; + reg = <0x07fa0000 0x00060000>; + }; + }; + }; + + UART0: serial@ef600200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1a 0x4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600400 { + compatible = "ibm,iic-405ex", "ibm,iic"; + reg = <0xef600400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@68 { + compatible = "dallas,ds1340"; + reg = <0x68>; + }; + }; + + IIC1: i2c@ef600500 { + compatible = "ibm,iic-405ex", "ibm,iic"; + reg = <0xef600500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x7 0x4>; + }; + + RGMII0: emac-rgmii@ef600b00 { + compatible = "ibm,rgmii-405ex", "ibm,rgmii"; + reg = <0xef600b00 0x00000104>; + has-mdio; + }; + + EMAC0: ethernet@ef600900 { + linux,network-index = <0x0>; + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 + /*Wake*/ 0x1 &UIC1 0x1d 0x4>; + reg = <0xef600900 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600a00 { + linux,network-index = <0x1>; + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4sync"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4 + /*Wake*/ 0x1 &UIC1 0x1f 0x4>; + reg = <0xef600a00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + GPIO: gpio@ef600800 { + device_type = "gpio"; + compatible = "ibm,gpio-405ex", "ibm,ppc4xx-gpio"; + reg = <0xef600800 0x50>; + }; + }; + }; + chosen { + linux,stdout-path = "/plb/opb/serial@ef600200"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts index d6c669c888e9..b868d22984e9 100644 --- a/arch/powerpc/boot/dts/p1010rdb.dts +++ b/arch/powerpc/boot/dts/p1010rdb.dts @@ -9,230 +9,33 @@ * option) any later version. */ -/include/ "p1010si.dtsi" +/include/ "fsl/p1010si-pre.dtsi" / { model = "fsl,P1010RDB"; compatible = "fsl,P1010RDB"; - aliases { - serial0 = &serial0; - serial1 = &serial1; - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - pci0 = &pci0; - pci1 = &pci1; - can0 = &can0; - can1 = &can1; - }; - memory { device_type = "memory"; }; - ifc@ffe1e000 { + board_ifc: ifc: ifc@ffe1e000 { /* NOR, NAND Flashes and CPLD on board */ ranges = <0x0 0x0 0x0 0xee000000 0x02000000 0x1 0x0 0x0 0xff800000 0x00010000 0x3 0x0 0x0 0xffb00000 0x00000020>; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x2000000>; - bank-width = <2>; - device-width = <1>; - - partition@40000 { - /* 256KB for DTB Image */ - reg = <0x00040000 0x00040000>; - label = "NOR DTB Image"; - }; - - partition@80000 { - /* 7 MB for Linux Kernel Image */ - reg = <0x00080000 0x00700000>; - label = "NOR Linux Kernel Image"; - }; - - partition@800000 { - /* 20MB for JFFS2 based Root file System */ - reg = <0x00800000 0x01400000>; - label = "NOR JFFS2 Root File System"; - }; - - partition@1f00000 { - /* This location must not be altered */ - /* 512KB for u-boot Bootloader Image */ - /* 512KB for u-boot Environment Variables */ - reg = <0x01f00000 0x00100000>; - label = "NOR U-Boot Image"; - read-only; - }; - }; - - nand@1,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,ifc-nand"; - reg = <0x1 0x0 0x10000>; - - partition@0 { - /* This location must not be altered */ - /* 1MB for u-boot Bootloader Image */ - reg = <0x0 0x00100000>; - label = "NAND U-Boot Image"; - read-only; - }; - - partition@100000 { - /* 1MB for DTB Image */ - reg = <0x00100000 0x00100000>; - label = "NAND DTB Image"; - }; - - partition@200000 { - /* 4MB for Linux Kernel Image */ - reg = <0x00200000 0x00400000>; - label = "NAND Linux Kernel Image"; - }; - - partition@600000 { - /* 4MB for Compressed Root file System Image */ - reg = <0x00600000 0x00400000>; - label = "NAND Compressed RFS Image"; - }; - - partition@a00000 { - /* 15MB for JFFS2 based Root file System */ - reg = <0x00a00000 0x00f00000>; - label = "NAND JFFS2 Root File System"; - }; - - partition@1900000 { - /* 7MB for User Area */ - reg = <0x01900000 0x00700000>; - label = "NAND User area"; - }; - }; - - cpld@3,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p1010rdb-cpld"; - reg = <0x3 0x0 0x0000020>; - bank-width = <1>; - device-width = <1>; - }; + reg = <0x0 0xffe1e000 0 0x2000>; }; - soc@ffe00000 { - spi@7000 { - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,s25sl12801"; - reg = <0>; - spi-max-frequency = <50000000>; - - partition@0 { - /* 1MB for u-boot Bootloader Image */ - /* 1MB for Environment */ - reg = <0x0 0x00100000>; - label = "SPI Flash U-Boot Image"; - read-only; - }; - - partition@100000 { - /* 512KB for DTB Image */ - reg = <0x00100000 0x00080000>; - label = "SPI Flash DTB Image"; - }; - - partition@180000 { - /* 4MB for Linux Kernel Image */ - reg = <0x00180000 0x00400000>; - label = "SPI Flash Linux Kernel Image"; - }; - - partition@580000 { - /* 4MB for Compressed RFS Image */ - reg = <0x00580000 0x00400000>; - label = "SPI Flash Compressed RFSImage"; - }; - - partition@980000 { - /* 6.5MB for JFFS2 based RFS */ - reg = <0x00980000 0x00680000>; - label = "SPI Flash JFFS2 RFS"; - }; - }; - }; - - usb@22000 { - phy_type = "utmi"; - }; - - mdio@24000 { - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x1>; - }; - - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <2 1>; - reg = <0x0>; - }; - - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <2 1>; - reg = <0x2>; - }; - }; - - enet0: ethernet@b0000 { - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - }; - - enet1: ethernet@b1000 { - phy-handle = <&phy1>; - tbi-handle = <&tbi0>; - phy-connection-type = "sgmii"; - }; - - enet2: ethernet@b2000 { - phy-handle = <&phy2>; - tbi-handle = <&tbi1>; - phy-connection-type = "sgmii"; - }; + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; }; pci0: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; - ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000 @@ -244,24 +47,10 @@ }; pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 @@ -272,3 +61,6 @@ }; }; }; + +/include/ "p1010rdb.dtsi" +/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi new file mode 100644 index 000000000000..d4c4a7730285 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb.dtsi @@ -0,0 +1,234 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_ifc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 7 MB for Linux Kernel Image */ + reg = <0x00080000 0x00700000>; + label = "NOR Linux Kernel Image"; + }; + + partition@800000 { + /* 20MB for JFFS2 based Root file System */ + reg = <0x00800000 0x01400000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@1f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x01f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00f00000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1900000 { + /* 7MB for User Area */ + reg = <0x01900000 0x00700000>; + label = "NAND User area"; + }; + }; + + cpld@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1010rdb-cpld"; + reg = <0x3 0x0 0x0000020>; + bank-width = <1>; + device-width = <1>; + }; +}; + +&board_soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + /* 1MB for u-boot Bootloader Image */ + /* 1MB for Environment */ + reg = <0x0 0x00100000>; + label = "SPI Flash U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 512KB for DTB Image */ + reg = <0x00100000 0x00080000>; + label = "SPI Flash DTB Image"; + }; + + partition@180000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00180000 0x00400000>; + label = "SPI Flash Linux Kernel Image"; + }; + + partition@580000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00580000 0x00400000>; + label = "SPI Flash Compressed RFSImage"; + }; + + partition@980000 { + /* 6.5MB for JFFS2 based RFS */ + reg = <0x00980000 0x00680000>; + label = "SPI Flash JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "utmi"; + dr_mode = "host"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x0>; + }; + + phy2: ethernet-phy@2 { + interrupts = <2 1 0 0>; + reg = <0x2>; + }; + + tbi-phy@3 { + device-type = "tbi-phy"; + reg = <0x3>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy2>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dts b/arch/powerpc/boot/dts/p1010rdb_36b.dts new file mode 100644 index 000000000000..64776f4a4651 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb_36b.dts @@ -0,0 +1,89 @@ +/* + * P1010 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB"; + compatible = "fsl,P1010RDB"; + + memory { + device_type = "memory"; + }; + + board_ifc: ifc: ifc@fffe1e000 { + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0xf 0xee000000 0x02000000 + 0x1 0x0 0xf 0xff800000 0x00010000 + 0x3 0x0 0xf 0xffb00000 0x00000020>; + reg = <0xf 0xffe1e000 0 0x2000>; + }; + + board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1010rdb.dtsi" +/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010si.dtsi b/arch/powerpc/boot/dts/p1010si.dtsi deleted file mode 100644 index cabe0a453ae6..000000000000 --- a/arch/powerpc/boot/dts/p1010si.dtsi +++ /dev/null @@ -1,374 +0,0 @@ -/* - * P1010si Device Tree Source - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/dts-v1/; -/ { - compatible = "fsl,P1010"; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,P1010@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - }; - - ifc@ffe1e000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; - reg = <0x0 0xffe1e000 0 0x2000>; - interrupts = <16 2 19 2>; - interrupt-parent = <&mpic>; - }; - - soc@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,p1010-immr", "simple-bus"; - ranges = <0x0 0x0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p1010-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <16 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,p1010-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - spi@7000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc8536-espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2>; - interrupt-parent = <&mpic>; - fsl,espi-num-chipselects = <1>; - }; - - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,mpc8572-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2>; - interrupt-parent = <&mpic>; - gpio-controller; - }; - - sata@18000 { - compatible = "fsl,pq-sata-v2"; - reg = <0x18000 0x1000>; - cell-index = <1>; - interrupts = <74 0x2>; - interrupt-parent = <&mpic>; - }; - - sata@19000 { - compatible = "fsl,pq-sata-v2"; - reg = <0x19000 0x1000>; - cell-index = <2>; - interrupts = <41 0x2>; - interrupt-parent = <&mpic>; - }; - - can0: can@1c000 { - compatible = "fsl,p1010-flexcan"; - reg = <0x1c000 0x1000>; - interrupts = <48 0x2>; - interrupt-parent = <&mpic>; - }; - - can1: can@1d000 { - compatible = "fsl,p1010-flexcan"; - reg = <0x1d000 0x1000>; - interrupts = <61 0x2>; - interrupt-parent = <&mpic>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,p1010-l2-cache-controller", - "fsl,p1014-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2,256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p1010-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - usb@22000 { - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; - dr_mode = "host"; - }; - - mdio@24000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-mdio"; - reg = <0x24000 0x1000 0xb0030 0x4>; - }; - - mdio@25000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-tbi"; - reg = <0x25000 0x1000 0xb1030 0x4>; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-tbi"; - reg = <0x26000 0x1000 0xb1030 0x4>; - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - sdhci@2e000 { - compatible = "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x8>; - interrupt-parent = <&mpic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - fsl,sdhci-auto-cmd12; - }; - - enet0: ethernet@b0000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; - - queue-group@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb0000 0x1000>; - fsl,rx-bit-map = <0xff>; - fsl,tx-bit-map = <0xff>; - interrupts = <29 2 30 2 34 2>; - }; - - }; - - enet1: ethernet@b1000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; - - queue-group@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb1000 0x1000>; - fsl,rx-bit-map = <0xff>; - fsl,tx-bit-map = <0xff>; - interrupts = <35 2 36 2 40 2>; - }; - - }; - - enet2: ethernet@b2000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; - - queue-group@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb2000 0x1000>; - fsl,rx-bit-map = <0xff>; - fsl,tx-bit-map = <0xff>; - interrupts = <31 2 32 2 33 2>; - }; - - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,p1010-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,p1010-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - }; - - pci0: pcie@ffe09000 { - compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe09000 0 0x1000>; - bus-range = <0 255>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - pci1: pcie@ffe0a000 { - compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe0a000 0 0x1000>; - bus-range = <0 255>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; -}; diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts index d6a8ae458137..518bf99b1f50 100644 --- a/arch/powerpc/boot/dts/p1020rdb.dts +++ b/arch/powerpc/boot/dts/p1020rdb.dts @@ -9,267 +9,33 @@ * option) any later version. */ -/include/ "p1020si.dtsi" - +/include/ "fsl/p1020si-pre.dtsi" / { model = "fsl,P1020RDB"; compatible = "fsl,P1020RDB"; - aliases { - serial0 = &serial0; - serial1 = &serial1; - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - pci0 = &pci0; - pci1 = &pci1; - }; - memory { device_type = "memory"; }; - localbus@ffe05000 { + board_lbc: lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ ranges = <0x0 0x0 0x0 0xef000000 0x01000000 0x1 0x0 0x0 0xffa00000 0x00040000 0x2 0x0 0x0 0xffb00000 0x00020000>; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x1000000>; - bank-width = <2>; - device-width = <1>; - - partition@0 { - /* This location must not be altered */ - /* 256KB for Vitesse 7385 Switch firmware */ - reg = <0x0 0x00040000>; - label = "NOR (RO) Vitesse-7385 Firmware"; - read-only; - }; - - partition@40000 { - /* 256KB for DTB Image */ - reg = <0x00040000 0x00040000>; - label = "NOR (RO) DTB Image"; - read-only; - }; - - partition@80000 { - /* 3.5 MB for Linux Kernel Image */ - reg = <0x00080000 0x00380000>; - label = "NOR (RO) Linux Kernel Image"; - read-only; - }; - - partition@400000 { - /* 11MB for JFFS2 based Root file System */ - reg = <0x00400000 0x00b00000>; - label = "NOR (RW) JFFS2 Root File System"; - }; - - partition@f00000 { - /* This location must not be altered */ - /* 512KB for u-boot Bootloader Image */ - /* 512KB for u-boot Environment Variables */ - reg = <0x00f00000 0x00100000>; - label = "NOR (RO) U-Boot Image"; - read-only; - }; - }; - - nand@1,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p1020-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x1 0x0 0x40000>; - - partition@0 { - /* This location must not be altered */ - /* 1MB for u-boot Bootloader Image */ - reg = <0x0 0x00100000>; - label = "NAND (RO) U-Boot Image"; - read-only; - }; - - partition@100000 { - /* 1MB for DTB Image */ - reg = <0x00100000 0x00100000>; - label = "NAND (RO) DTB Image"; - read-only; - }; - - partition@200000 { - /* 4MB for Linux Kernel Image */ - reg = <0x00200000 0x00400000>; - label = "NAND (RO) Linux Kernel Image"; - read-only; - }; - - partition@600000 { - /* 4MB for Compressed Root file System Image */ - reg = <0x00600000 0x00400000>; - label = "NAND (RO) Compressed RFS Image"; - read-only; - }; - - partition@a00000 { - /* 7MB for JFFS2 based Root file System */ - reg = <0x00a00000 0x00700000>; - label = "NAND (RW) JFFS2 Root File System"; - }; - - partition@1100000 { - /* 15MB for JFFS2 based Root file System */ - reg = <0x01100000 0x00f00000>; - label = "NAND (RW) Writable User area"; - }; - }; - - L2switch@2,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "vitesse-7385"; - reg = <0x2 0x0 0x20000>; - }; - }; - soc@ffe00000 { - i2c@3000 { - rtc@68 { - compatible = "dallas,ds1339"; - reg = <0x68>; - }; - }; - - spi@7000 { - - fsl_m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,espi-flash"; - reg = <0>; - linux,modalias = "fsl_m25p80"; - modal = "s25sl128b"; - spi-max-frequency = <50000000>; - mode = <0>; - - partition@0 { - /* 512KB for u-boot Bootloader Image */ - reg = <0x0 0x00080000>; - label = "SPI (RO) U-Boot Image"; - read-only; - }; - - partition@80000 { - /* 512KB for DTB Image */ - reg = <0x00080000 0x00080000>; - label = "SPI (RO) DTB Image"; - read-only; - }; - - partition@100000 { - /* 4MB for Linux Kernel Image */ - reg = <0x00100000 0x00400000>; - label = "SPI (RO) Linux Kernel Image"; - read-only; - }; - - partition@500000 { - /* 4MB for Compressed RFS Image */ - reg = <0x00500000 0x00400000>; - label = "SPI (RO) Compressed RFS Image"; - read-only; - }; - - partition@900000 { - /* 7MB for JFFS2 based RFS */ - reg = <0x00900000 0x00700000>; - label = "SPI (RW) JFFS2 RFS"; - }; - }; - }; - - mdio@24000 { - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x0>; - }; - - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <2 1>; - reg = <0x1>; - }; - }; - - mdio@25000 { - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet0: ethernet@b0000 { - fixed-link = <1 1 1000 0 0>; - phy-connection-type = "rgmii-id"; - - }; - - enet1: ethernet@b1000 { - phy-handle = <&phy0>; - tbi-handle = <&tbi0>; - phy-connection-type = "sgmii"; - - }; - - enet2: ethernet@b2000 { - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - - }; - - usb@22000 { - phy_type = "ulpi"; - }; - - /* USB2 is shared with localbus, so it must be disabled - by default. We can't put 'status = "disabled";' here - since U-Boot doesn't clear the status property when - it enables USB2. OTOH, U-Boot does create a new node - when there isn't any. So, just comment it out. - usb@23000 { - phy_type = "ulpi"; - }; - */ - + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; }; pci0: pcie@ffe09000 { ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; + reg = <0 0xffe09000 0 0x1000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000 @@ -281,21 +47,10 @@ }; pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 @@ -306,3 +61,6 @@ }; }; }; + +/include/ "p1020rdb.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb.dtsi b/arch/powerpc/boot/dts/p1020rdb.dtsi new file mode 100644 index 000000000000..b5bd86f4baf2 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb.dtsi @@ -0,0 +1,247 @@ +/* + * P1020 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR (RO) Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR (RO) DTB Image"; + read-only; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR (RO) Linux Kernel Image"; + read-only; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR (RW) JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR (RO) U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND (RO) U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND (RO) DTB Image"; + read-only; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND (RO) Linux Kernel Image"; + read-only; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND (RO) Compressed RFS Image"; + read-only; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND (RW) JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND (RW) Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; +}; + +&board_soc { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "u-boot"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "dtb"; + read-only; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "kernel"; + read-only; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "file system"; + read-only; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "file system jffs2"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + usb@23000 { + phy_type = "ulpi"; + }; + */ + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + }; + + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020rdb_36b.dts b/arch/powerpc/boot/dts/p1020rdb_36b.dts new file mode 100644 index 000000000000..bdbdb6097e57 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb_36b.dts @@ -0,0 +1,66 @@ +/* + * P1020 RDB Device Tree Source (36-bit address map) + * + * Copyright 2009-2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB"; + compatible = "fsl,P1020RDB"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xffa00000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts index f0bf7f42f097..41b4585c5da8 100644 --- a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts +++ b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts @@ -16,7 +16,7 @@ * option) any later version. */ -/include/ "p1020si.dtsi" +/include/ "p1020rdb.dts" / { model = "fsl,P1020RDB"; @@ -32,7 +32,7 @@ cpus { PowerPC,P1020@1 { - status = "disabled"; + status = "disabled"; }; }; @@ -45,169 +45,19 @@ }; soc@ffe00000 { - i2c@3000 { - rtc@68 { - compatible = "dallas,ds1339"; - reg = <0x68>; - }; - }; - serial1: serial@4600 { status = "disabled"; }; - spi@7000 { - fsl_m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,espi-flash"; - reg = <0>; - linux,modalias = "fsl_m25p80"; - spi-max-frequency = <40000000>; - - partition@0 { - /* 512KB for u-boot Bootloader Image */ - reg = <0x0 0x00080000>; - label = "SPI (RO) U-Boot Image"; - read-only; - }; - - partition@80000 { - /* 512KB for DTB Image */ - reg = <0x00080000 0x00080000>; - label = "SPI (RO) DTB Image"; - read-only; - }; - - partition@100000 { - /* 4MB for Linux Kernel Image */ - reg = <0x00100000 0x00400000>; - label = "SPI (RO) Linux Kernel Image"; - read-only; - }; - - partition@500000 { - /* 4MB for Compressed RFS Image */ - reg = <0x00500000 0x00400000>; - label = "SPI (RO) Compressed RFS Image"; - read-only; - }; - - partition@900000 { - /* 7MB for JFFS2 based RFS */ - reg = <0x00900000 0x00700000>; - label = "SPI (RW) JFFS2 RFS"; - }; - }; - }; - - mdio@24000 { - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <2 1>; - reg = <0x1>; - }; - }; - - mdio@25000 { - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - enet0: ethernet@b0000 { status = "disabled"; }; - enet1: ethernet@b1000 { - phy-handle = <&phy0>; - tbi-handle = <&tbi0>; - phy-connection-type = "sgmii"; - }; - - enet2: ethernet@b2000 { - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - }; - - usb@22000 { - phy_type = "ulpi"; - }; - - /* USB2 is shared with localbus, so it must be disabled - by default. We can't put 'status = "disabled";' here - since U-Boot doesn't clear the status property when - it enables USB2. OTOH, U-Boot does create a new node - when there isn't any. So, just comment it out. - usb@23000 { - phy_type = "ulpi"; - }; - */ - mpic: pic@40000 { protected-sources = < 42 29 30 34 /* serial1, enet0-queue-group0 */ 17 18 24 45 /* enet0-queue-group1, crypto */ >; }; - - }; - - pci0: pcie@ffe09000 { - ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - pci1: pcie@ffe0a000 { - ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; }; }; diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts index 6ec02204a44e..517453821884 100644 --- a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts +++ b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts @@ -15,7 +15,7 @@ * option) any later version. */ -/include/ "p1020si.dtsi" +/include/ "p1020rdb.dts" / { model = "fsl,P1020RDB"; @@ -28,7 +28,7 @@ cpus { PowerPC,P1020@0 { - status = "disabled"; + status = "disabled"; }; }; @@ -85,12 +85,6 @@ status = "disabled"; }; - enet0: ethernet@b0000 { - fixed-link = <1 1 1000 0 0>; - phy-connection-type = "rgmii-id"; - - }; - enet1: ethernet@b1000 { status = "disabled"; }; @@ -135,7 +129,6 @@ global-utilities@e0000 { //global utilities block status = "disabled"; }; - }; pci0: pcie@ffe09000 { diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi deleted file mode 100644 index 5c5acb66c3fc..000000000000 --- a/arch/powerpc/boot/dts/p1020si.dtsi +++ /dev/null @@ -1,377 +0,0 @@ -/* - * P1020si Device Tree Source - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/dts-v1/; -/ { - compatible = "fsl,P1020"; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,P1020@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - - PowerPC,P1020@1 { - device_type = "cpu"; - reg = <0x1>; - next-level-cache = <&L2>; - }; - }; - - localbus@ffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus"; - reg = <0 0xffe05000 0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; - }; - - soc@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,p1020-immr", "simple-bus"; - ranges = <0x0 0x0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p1020-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <16 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,p1020-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - spi@7000 { - cell-index = <0>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2>; - interrupt-parent = <&mpic>; - mode = "cpu"; - }; - - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,mpc8572-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2>; - interrupt-parent = <&mpic>; - gpio-controller; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,p1020-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2,256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - mdio@24000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-mdio"; - reg = <0x24000 0x1000 0xb0030 0x4>; - - }; - - mdio@25000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-tbi"; - reg = <0x25000 0x1000 0xb1030 0x4>; - - }; - - enet0: ethernet@b0000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; - - queue-group@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb0000 0x1000>; - interrupts = <29 2 30 2 34 2>; - }; - - queue-group@1 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb4000 0x1000>; - interrupts = <17 2 18 2 24 2>; - }; - }; - - enet1: ethernet@b1000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; - - queue-group@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb1000 0x1000>; - interrupts = <35 2 36 2 40 2>; - }; - - queue-group@1 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb5000 0x1000>; - interrupts = <51 2 52 2 67 2>; - }; - }; - - enet2: ethernet@b2000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; - - queue-group@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb2000 0x1000>; - interrupts = <31 2 32 2 33 2>; - }; - - queue-group@1 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xb6000 0x1000>; - interrupts = <25 2 26 2 27 2>; - }; - }; - - usb@22000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; - }; - - /* USB2 is shared with localbus, so it must be disabled - by default. We can't put 'status = "disabled";' here - since U-Boot doesn't clear the status property when - it enables USB2. OTOH, U-Boot does create a new node - when there isn't any. So, just comment it out. - usb@23000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x23000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <46 0x2>; - phy_type = "ulpi"; - }; - */ - - sdhci@2e000 { - compatible = "fsl,p1020-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2>; - interrupt-parent = <&mpic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - - crypto@30000 { - compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", - "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xbfe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,p1020-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,p1020-guts","fsl,p2020-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - }; - - pci0: pcie@ffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe09000 0 0x1000>; - bus-range = <0 255>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - pci1: pcie@ffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe0a000 0 0x1000>; - bus-range = <0 255>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; -}; diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts index ad5b85269004..d9540791e434 100644 --- a/arch/powerpc/boot/dts/p1021mds.dts +++ b/arch/powerpc/boot/dts/p1021mds.dts @@ -9,53 +9,22 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/p1021si-pre.dtsi" / { model = "fsl,P1021"; compatible = "fsl,P1021MDS"; - #address-cells = <2>; - #size-cells = <2>; aliases { - serial0 = &serial0; - serial1 = &serial1; - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; ethernet3 = &enet3; ethernet4 = &enet4; - pci0 = &pci0; - pci1 = &pci1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,P1021@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - - PowerPC,P1021@1 { - device_type = "cpu"; - reg = <0x1>; - next-level-cache = <&L2>; - }; }; memory { device_type = "memory"; }; - localbus@ffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus"; - reg = <0 0xffe05000 0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0x0 0x1000>; /* NAND Flash, BCSR, PMC0/1*/ ranges = <0x0 0x0 0x0 0xfc000000 0x02000000 @@ -138,99 +107,26 @@ }; }; - soc@ffe00000 { - - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; + soc: soc@ffe00000 { compatible = "fsl,p1021-immr", "simple-bus"; - ranges = <0x0 0x0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p1021-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <16 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,p1021-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; + ranges = <0x0 0x0 0xffe00000 0x100000>; i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; rtc@68 { compatible = "dallas,ds1374"; reg = <0x68>; }; }; - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - spi@7000 { - cell-index = <0>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2>; - interrupt-parent = <&mpic>; - espi,num-ss-bits = <4>; - mode = "cpu"; - - fsl_m25p80@0 { + + flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,espi-flash"; + compatible = "spansion,s25sl12801"; reg = <0>; - linux,modalias = "fsl_m25p80"; spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { label = "u-boot-spi"; reg = <0x00000000 0x00100000>; @@ -253,237 +149,49 @@ }; }; - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,mpc8572-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2>; - interrupt-parent = <&mpic>; - gpio-controller; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,p1021-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2,256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - usb@22000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; phy_type = "ulpi"; }; - mdio@24000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-mdio"; - reg = <0x24000 0x1000 0xb0030 0x4>; - + mdio@24000 { phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <1 1>; + interrupts = <1 1 0 0>; reg = <0x0>; }; phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <2 1>; + interrupts = <2 1 0 0>; reg = <0x1>; }; phy4: ethernet-phy@4 { - interrupt-parent = <&mpic>; reg = <0x4>; }; + tbi-phy@5 { + device_type = "tbi-phy"; + reg = <0x5>; + }; }; mdio@25000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-tbi"; - reg = <0x25000 0x1000 0xb1030 0x4>; tbi0: tbi-phy@11 { reg = <0x11>; device_type = "tbi-phy"; }; }; - enet0: ethernet@B0000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; + ethernet@b0000 { phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; - queue-group@0{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB0000 0x1000>; - interrupts = <29 2 30 2 34 2>; - }; - queue-group@1{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB4000 0x1000>; - interrupts = <17 2 18 2 24 2>; - }; }; - enet1: ethernet@B1000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; + ethernet@b1000 { phy-handle = <&phy4>; tbi-handle = <&tbi0>; phy-connection-type = "sgmii"; - queue-group@0{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB1000 0x1000>; - interrupts = <35 2 36 2 40 2>; - }; - queue-group@1{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB5000 0x1000>; - interrupts = <51 2 52 2 67 2>; - }; }; - enet2: ethernet@B2000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = <&mpic>; + ethernet@b2000 { phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; - queue-group@0{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB2000 0x1000>; - interrupts = <31 2 32 2 33 2>; - }; - queue-group@1{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB6000 0x1000>; - interrupts = <25 2 26 2 27 2>; - }; - }; - - sdhci@2e000 { - compatible = "fsl,p1021-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2>; - interrupt-parent = <&mpic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - - crypto@30000 { - compatible = "fsl,sec3.3", "fsl,sec3.1", - "fsl,sec3.0", "fsl,sec2.4", - "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x97c>; - fsl,descriptor-types-mask = <0x3a30abf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,p1021-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,p1021-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; }; par_io@e0100 { @@ -499,8 +207,7 @@ 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ - 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 -*/ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ @@ -535,31 +242,10 @@ }; pci0: pcie@ffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xffe09000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000 @@ -571,31 +257,10 @@ }; pci1: pcie@ffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xffe0a000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xc0000000 0x2000000 0x0 0xc0000000 0x0 0x20000000 @@ -606,36 +271,16 @@ }; }; - qe@ffe80000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "qe"; - compatible = "fsl,qe"; + qe: qe@ffe80000 { ranges = <0x0 0x0 0xffe80000 0x40000>; reg = <0 0xffe80000 0 0x480>; brg-frequency = <0>; bus-frequency = <0>; - fsl,qe-num-riscs = <1>; - fsl,qe-num-snums = <28>; status = "disabled"; /* no firmware loaded */ - qeic: interrupt-controller@80 { - interrupt-controller; - compatible = "fsl,qe-ic"; - #address-cells = <0>; - #interrupt-cells = <1>; - reg = <0x80 0x80>; - interrupts = <63 2 60 2>; //high:47 low:44 - interrupt-parent = <&mpic>; - }; - enet3: ucc@2000 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <1>; - reg = <0x2000 0x200>; - interrupts = <32>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "clk12"; tx-clock-name = "clk9"; @@ -645,20 +290,15 @@ }; mdio@2120 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x2120 0x18>; - compatible = "fsl,ucc-mdio"; - qe_phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <4 1>; + interrupts = <4 1 0 0>; reg = <0x0>; device_type = "ethernet-phy"; }; qe_phy1: ethernet-phy@03 { interrupt-parent = <&mpic>; - interrupts = <5 1>; + interrupts = <5 1 0 0>; reg = <0x3>; device_type = "ethernet-phy"; }; @@ -671,10 +311,6 @@ enet4: ucc@2400 { device_type = "network"; compatible = "ucc_geth"; - cell-index = <5>; - reg = <0x2400 0x200>; - interrupts = <40>; - interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "clk13"; @@ -682,18 +318,7 @@ phy-handle = <&qe_phy1>; phy-connection-type = "rmii"; }; - - muram@10000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,qe-muram", "fsl,cpm-muram"; - ranges = <0x0 0x10000 0x6000>; - - data-only@0 { - compatible = "fsl,qe-muram-data", - "fsl,cpm-muram-data"; - reg = <0x0 0x6000>; - }; - }; }; }; + +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts index b9b8719a6204..ef95717db4bc 100644 --- a/arch/powerpc/boot/dts/p1022ds.dts +++ b/arch/powerpc/boot/dts/p1022ds.dts @@ -8,57 +8,36 @@ * kind, whether express or implied. */ -/dts-v1/; +/include/ "fsl/p1022si-pre.dtsi" / { - model = "fsl,P1022"; + model = "fsl,P1022DS"; compatible = "fsl,P1022DS"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&mpic>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,P1022@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - - PowerPC,P1022@1 { - device_type = "cpu"; - reg = <0x1>; - next-level-cache = <&L2>; - }; - }; memory { device_type = "memory"; }; - localbus@fffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus"; - reg = <0 0xffe05000 0 0x1000>; - interrupts = <19 2 0 0>; - + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 0x1 0x0 0xf 0xe0000000 0x08000000 - 0x2 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0xf 0xff800000 0x00040000 0x3 0x0 0xf 0xffdf0000 0x00008000>; + /* + * This node is used to access the pixis via "indirect" mode, + * which is done by writing the pixis register index to chip + * select 0 and the value to/from chip select 1. Indirect + * mode is the only way to access the pixis when DIU video + * is enabled. Note that this assumes that the first column + * of the 'ranges' property above is the chip select number. + */ + board-control@0,0 { + compatible = "fsl,p1022ds-indirect-pixis"; + reg = <0x0 0x0 1 /* CS0 */ + 0x1 0x0 1>; /* CS1 */ + }; + nor@0,0 { #address-cells = <1>; #size-cells = <1>; @@ -161,51 +140,10 @@ }; }; - soc@fffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,p1022-immr", "simple-bus"; + soc: soc@fffe00000 { ranges = <0x0 0xf 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p1022-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <16 2 0 0>; - }; - - memory-controller@2000 { - compatible = "fsl,p1022-memory-controller"; - reg = <0x2000 0x1000>; - interrupts = <16 2 0 0>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2 0 0>; - dfsrr; - }; i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2 0 0>; - dfsrr; - wm8776:codec@1a { compatible = "wlf,wm8776"; reg = <0x1a>; @@ -216,41 +154,14 @@ }; }; - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2 0 0>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2 0 0>; - }; - spi@7000 { - cell-index = <0>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2 0 0>; - espi,num-ss-bits = <4>; - mode = "cpu"; - - fsl_m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,espi-flash"; + compatible = "spansion,s25sl12801"; reg = <0>; - linux,modalias = "fsl_m25p80"; spi-max-frequency = <40000000>; /* input clock */ + partition@0 { label = "u-boot-spi"; reg = <0x00000000 0x00100000>; @@ -274,115 +185,20 @@ }; ssi@15000 { - compatible = "fsl,mpc8610-ssi"; - cell-index = <0>; - reg = <0x15000 0x100>; - interrupts = <75 2 0 0>; fsl,mode = "i2s-slave"; codec-handle = <&wm8776>; - fsl,playback-dma = <&dma00>; - fsl,capture-dma = <&dma01>; - fsl,fifo-depth = <15>; fsl,ssi-asynchronous; }; - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0xc300 0x4>; - ranges = <0x0 0xc100 0x200>; - cell-index = <1>; - dma00: dma-channel@0 { - compatible = "fsl,ssi-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <76 2 0 0>; - }; - dma01: dma-channel@80 { - compatible = "fsl,ssi-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <77 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <78 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <79 2 0 0>; - }; - }; - - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,mpc8572-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2 0 0>; - gpio-controller; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,p1022-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2, 256K - interrupts = <16 2 0 0>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <20 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <21 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <22 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <23 2 0 0>; - }; - }; - usb@22000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - interrupts = <28 0x2 0 0>; phy_type = "ulpi"; }; - mdio@24000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-mdio"; - reg = <0x24000 0x1000 0xb0030 0x4>; + usb@23000 { + status = "disabled"; + }; + mdio@24000 { phy0: ethernet-phy@0 { interrupts = <3 1 0 0>; reg = <0x1>; @@ -391,189 +207,28 @@ interrupts = <9 1 0 0>; reg = <0x2>; }; + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; }; - mdio@25000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-mdio"; - reg = <0x25000 0x1000 0xb1030 0x4>; - }; - - enet0: ethernet@B0000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - fsl,magic-packet; - fsl,wake-on-filer; - local-mac-address = [ 00 00 00 00 00 00 ]; + ethernet@b0000 { phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; - queue-group@0{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB0000 0x1000>; - interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; - }; - queue-group@1{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB4000 0x1000>; - interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>; - }; }; - enet1: ethernet@B1000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; + ethernet@b1000 { phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; - queue-group@0{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB1000 0x1000>; - interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; - }; - queue-group@1{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB5000 0x1000>; - interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>; - }; - }; - - sdhci@2e000 { - compatible = "fsl,p1022-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2 0 0>; - fsl,sdhci-auto-cmd12; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - - crypto@30000 { - compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0", - "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", - "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 0 0 58 2 0 0>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x97c>; - fsl,descriptor-types-mask = <0x3a30abf>; - }; - - sata@18000 { - compatible = "fsl,p1022-sata", "fsl,pq-sata-v2"; - reg = <0x18000 0x1000>; - cell-index = <1>; - interrupts = <74 0x2 0 0>; - }; - - sata@19000 { - compatible = "fsl,p1022-sata", "fsl,pq-sata-v2"; - reg = <0x19000 0x1000>; - cell-index = <2>; - interrupts = <41 0x2 0 0>; - }; - - power@e0070{ - compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc"; - reg = <0xe0070 0x20>; - }; - - display@10000 { - compatible = "fsl,diu", "fsl,p1022-diu"; - reg = <0x10000 1000>; - interrupts = <64 2 0 0>; - }; - - timer@41100 { - compatible = "fsl,mpic-global-timer"; - reg = <0x41100 0x100 0x41300 4>; - interrupts = <0 0 3 0 - 1 0 3 0 - 2 0 3 0 - 3 0 3 0>; - }; - - timer@42100 { - compatible = "fsl,mpic-global-timer"; - reg = <0x42100 0x100 0x42300 4>; - interrupts = <4 0 3 0 - 5 0 3 0 - 6 0 3 0 - 7 0 3 0>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <4>; - reg = <0x40000 0x40000>; - compatible = "fsl,mpic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,p1022-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,p1022-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; }; }; pci0: pcie@fffe09000 { - compatible = "fsl,p1022-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xffe09000 0 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000 + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupts = <16 2 0 0>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 @@ -585,30 +240,11 @@ }; pci1: pcie@fffe0a000 { - compatible = "fsl,p1022-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xffe0a000 0 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000 + ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupts = <16 2 0 0>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 - >; pcie@0 { reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 @@ -619,32 +255,11 @@ }; }; - pci2: pcie@fffe0b000 { - compatible = "fsl,p1022-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xffe0b000 0 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupts = <16 2 0 0>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 8 1 - 0000 0 0 2 &mpic 9 1 - 0000 0 0 3 &mpic 10 1 - 0000 0 0 4 &mpic 11 1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 @@ -655,3 +270,5 @@ }; }; }; + +/include/ "fsl/p1022si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts index d3b478242ea9..beb6cb12e59d 100644 --- a/arch/powerpc/boot/dts/p1023rds.dts +++ b/arch/powerpc/boot/dts/p1023rds.dts @@ -34,137 +34,30 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/dts-v1/; +/include/ "fsl/p1023si-pre.dtsi" / { model = "fsl,P1023"; compatible = "fsl,P1023RDS"; #address-cells = <2>; #size-cells = <2>; - - aliases { - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - - crypto = &crypto; - sec_jr0 = &sec_jr0; - sec_jr1 = &sec_jr1; - sec_jr2 = &sec_jr2; - sec_jr3 = &sec_jr3; - rtic_a = &rtic_a; - rtic_b = &rtic_b; - rtic_c = &rtic_c; - rtic_d = &rtic_d; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: PowerPC,P1023@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - - cpu1: PowerPC,P1023@1 { - device_type = "cpu"; - reg = <0x1>; - next-level-cache = <&L2>; - }; - }; + interrupt-parent = <&mpic>; memory { device_type = "memory"; }; - soc@ff600000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,p1023-immr", "simple-bus"; + soc: soc@ff600000 { ranges = <0x0 0x0 0xff600000 0x200000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p1023-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <16 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,p1023-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; rtc@68 { compatible = "dallas,ds1374"; reg = <0x68>; }; }; - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - spi@7000 { - cell-index = <0>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,p1023-espi", "fsl,mpc8536-espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2>; - interrupt-parent = <&mpic>; - fsl,espi-num-chipselects = <4>; - fsl_dataflash@0 { #address-cells = <1>; #size-cells = <1>; @@ -186,197 +79,14 @@ }; }; - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,qoriq-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2>; - interrupt-parent = <&mpic>; - gpio-controller; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,p1023-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2,256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - usb@22000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; dr_mode = "host"; phy_type = "ulpi"; }; - - crypto: crypto@300000 { - compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x30000 0x10000>; - ranges = <0 0x30000 0x10000>; - interrupt-parent = <&mpic>; - interrupts = <58 2>; - - sec_jr0: jr@1000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupts = <45 2>; - }; - - sec_jr1: jr@2000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupts = <45 2>; - }; - - sec_jr2: jr@3000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupts = <57 2>; - }; - - sec_jr3: jr@4000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x4000 0x1000>; - interrupts = <57 2>; - }; - - rtic@6000 { - compatible = "fsl,sec-v4.2-rtic", - "fsl,sec-v4.0-rtic"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x6000 0x100>; - ranges = <0x0 0x6100 0xe00>; - - rtic_a: rtic-a@0 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x80>; - }; - - rtic_b: rtic-b@20 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x80>; - }; - - rtic_c: rtic-c@40 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x80>; - }; - - rtic_d: rtic-d@60 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x500 0x80>; - }; - }; - }; - - power@e0070{ - compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc", - "fsl,p1022-pmc"; - reg = <0xe0070 0x20>; - etsec1_clk: soc-clk@B0{ - fsl,pmcdr-mask = <0x00000080>; - }; - etsec2_clk: soc-clk@B1{ - fsl,pmcdr-mask = <0x00000040>; - }; - etsec3_clk: soc-clk@B2{ - fsl,pmcdr-mask = <0x00000020>; - }; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,p1023-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,p1023-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; }; - localbus@ff605000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus"; + lbc: localbus@ff605000 { reg = <0 0xff605000 0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; /* NOR Flash, BCSR */ ranges = <0x0 0x0 0x0 0xee000000 0x02000000 @@ -428,34 +138,18 @@ }; pci0: pcie@ff60a000 { - compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; - cell-index = <1>; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xff60a000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0 0 7>; /* IRQ[0:3] are pulled up on board, set to active-low */ + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 + 0000 0 0 1 &mpic 0 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 >; ranges = <0x2000000 0x0 0xc0000000 0x2000000 0x0 0xc0000000 @@ -467,38 +161,22 @@ }; }; - pci1: pcie@ff609000 { - compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; - cell-index = <2>; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; + board_pci1: pci1: pcie@ff609000 { reg = <0 0xff609000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0 0 7>; /* * IRQ[4:6] only for PCIe, set to active-high, * IRQ[7] is pulled up on board, set to active-low */ + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 2 - 0000 0 0 2 &mpic 5 2 - 0000 0 0 3 &mpic 6 2 - 0000 0 0 4 &mpic 7 1 + 0000 0 0 1 &mpic 4 2 0 0 + 0000 0 0 2 &mpic 5 2 0 0 + 0000 0 0 3 &mpic 6 2 0 0 + 0000 0 0 4 &mpic 7 1 0 0 >; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 @@ -511,37 +189,21 @@ }; pci2: pcie@ff60b000 { - cell-index = <3>; - compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; reg = <0 0xff60b000 0 0x1000>; - bus-range = <0 255>; ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0 0 7>; /* * IRQ[8:10] are pulled up on board, set to active-low * IRQ[11] only for PCIe, set to active-high, */ + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 8 1 - 0000 0 0 2 &mpic 9 1 - 0000 0 0 3 &mpic 10 1 - 0000 0 0 4 &mpic 11 2 + 0000 0 0 1 &mpic 8 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 2 0 0 >; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 @@ -553,3 +215,5 @@ }; }; }; + +/include/ "fsl/p1023si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts index 66f03d6477b2..237310cc7e6c 100644 --- a/arch/powerpc/boot/dts/p2020ds.dts +++ b/arch/powerpc/boot/dts/p2020ds.dts @@ -9,30 +9,17 @@ * option) any later version. */ -/include/ "p2020si.dtsi" +/include/ "fsl/p2020si-pre.dtsi" / { model = "fsl,P2020DS"; compatible = "fsl,P2020DS"; - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - }; - - memory { device_type = "memory"; }; - localbus@ffe05000 { - compatible = "fsl,elbc", "simple-bus"; + board_lbc: lbc: localbus@ffe05000 { ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 0x1 0x0 0x0 0xe0000000 0x08000000 0x2 0x0 0x0 0xffa00000 0x00040000 @@ -40,203 +27,18 @@ 0x4 0x0 0x0 0xffa40000 0x00040000 0x5 0x0 0x0 0xffa80000 0x00040000 0x6 0x0 0x0 0xffac0000 0x00040000>; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x8000000>; - bank-width = <2>; - device-width = <1>; - - ramdisk@0 { - reg = <0x0 0x03000000>; - read-only; - }; - - diagnostic@3000000 { - reg = <0x03000000 0x00e00000>; - read-only; - }; - - dink@3e00000 { - reg = <0x03e00000 0x00200000>; - read-only; - }; - - kernel@4000000 { - reg = <0x04000000 0x00400000>; - read-only; - }; - - jffs2@4400000 { - reg = <0x04400000 0x03b00000>; - }; - - dtb@7f00000 { - reg = <0x07f00000 0x00080000>; - read-only; - }; - - u-boot@7f80000 { - reg = <0x07f80000 0x00080000>; - read-only; - }; - }; - - nand@2,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,elbc-fcm-nand"; - reg = <0x2 0x0 0x40000>; - - u-boot@0 { - reg = <0x0 0x02000000>; - read-only; - }; - - jffs2@2000000 { - reg = <0x02000000 0x10000000>; - }; - - ramdisk@12000000 { - reg = <0x12000000 0x08000000>; - read-only; - }; - - kernel@1a000000 { - reg = <0x1a000000 0x04000000>; - }; - - dtb@1e000000 { - reg = <0x1e000000 0x01000000>; - read-only; - }; - - empty@1f000000 { - reg = <0x1f000000 0x21000000>; - }; - }; - - board-control@3,0 { - compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis"; - reg = <0x3 0x0 0x30>; - }; - - nand@4,0 { - compatible = "fsl,elbc-fcm-nand"; - reg = <0x4 0x0 0x40000>; - }; - - nand@5,0 { - compatible = "fsl,elbc-fcm-nand"; - reg = <0x5 0x0 0x40000>; - }; - - nand@6,0 { - compatible = "fsl,elbc-fcm-nand"; - reg = <0x6 0x0 0x40000>; - }; + reg = <0 0xffe05000 0 0x1000>; }; - soc@ffe00000 { - - usb@22000 { - phy_type = "ulpi"; - }; - - mdio@24520 { - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x2>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - - }; - - mdio@25520 { - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26520 { - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - - }; - - ptp_clock@24E00 { - compatible = "fsl,etsec-ptp"; - reg = <0x24E00 0xB0>; - interrupts = <68 2 69 2 70 2>; - interrupt-parent = < &mpic >; - fsl,tclk-period = <5>; - fsl,tmr-prsc = <200>; - fsl,tmr-add = <0xCCCCCCCD>; - fsl,tmr-fiper1 = <0x3B9AC9FB>; - fsl,tmr-fiper2 = <0x0001869B>; - fsl,max-adj = <249999999>; - }; - - enet0: ethernet@24000 { - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - }; - - enet1: ethernet@25000 { - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - - }; - - enet2: ethernet@26000 { - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - phy-connection-type = "rgmii-id"; - }; - - - msi@41600 { - compatible = "fsl,mpic-msi"; - }; + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; }; - pci0: pcie@ffe08000 { + pci2: pcie@ffe08000 { ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x8 0x1 - 0000 0x0 0x0 0x2 &mpic 0x9 0x1 - 0000 0x0 0x0 0x3 &mpic 0xa 0x1 - 0000 0x0 0x0 0x4 &mpic 0xb 0x1 - >; + reg = <0 0xffe08000 0 0x1000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 @@ -247,61 +49,11 @@ }; }; - pci1: pcie@ffe09000 { + board_pci1: pci1: pcie@ffe09000 { ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - interrupt-map-mask = <0xff00 0x0 0x0 0x7>; - interrupt-map = < - - // IDSEL 0x11 func 0 - PCI slot 1 - 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 1 - PCI slot 1 - 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 2 - PCI slot 1 - 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 3 - PCI slot 1 - 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 4 - PCI slot 1 - 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 5 - PCI slot 1 - 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 6 - PCI slot 1 - 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 7 - PCI slot 1 - 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x1d Audio - 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 - - // IDSEL 0x1e Legacy - 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 - 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 - - // IDSEL 0x1f IDE/SATA - 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 - 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 - >; - + reg = <0 0xffe09000 0 0x1000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000 @@ -309,89 +61,14 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 0x0 0x10000>; - uli1575@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - isa@1e { - device_type = "isa"; - #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <0xf000 0x0 0x0 0x0 0x0>; - ranges = <0x1 0x0 0x1000000 0x0 0x0 - 0x1000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - reg = <0x1 0x20 0x2 - 0x1 0xa0 0x2 - 0x1 0x4d0 0x2>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <4 1>; - interrupt-parent = <&mpic>; - }; - - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <0x1 0x60 0x1 0x1 0x64 0x1>; - interrupts = <1 3 12 3>; - interrupt-parent = - <&i8259>; - - keyboard@0 { - reg = <0x0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <0x1>; - compatible = "pnpPNP,f03"; - }; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <0x1 0x70 0x2>; - }; - - gpio@400 { - reg = <0x1 0x400 0x80>; - }; - }; - }; }; - }; - pci2: pcie@ffe0a000 { + pci0: pcie@ffe0a000 { ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; + reg = <0 0xffe0a000 0 0x1000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xc0000000 0x2000000 0x0 0xc0000000 0x0 0x20000000 @@ -402,3 +79,11 @@ }; }; }; + +/* + * p2020ds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "fsl/p2020si-post.dtsi" +/include/ "p2020ds.dtsi" diff --git a/arch/powerpc/boot/dts/p2020ds.dtsi b/arch/powerpc/boot/dts/p2020ds.dtsi new file mode 100644 index 000000000000..c1cf6cef4dd6 --- /dev/null +++ b/arch/powerpc/boot/dts/p2020ds.dtsi @@ -0,0 +1,316 @@ +/* + * P2020DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + ramdisk@0 { + reg = <0x0 0x03000000>; + read-only; + }; + + diagnostic@3000000 { + reg = <0x03000000 0x00e00000>; + read-only; + }; + + dink@3e00000 { + reg = <0x03e00000 0x00200000>; + read-only; + }; + + kernel@4000000 { + reg = <0x04000000 0x00400000>; + read-only; + }; + + jffs2@4400000 { + reg = <0x04400000 0x03b00000>; + }; + + dtb@7f00000 { + reg = <0x07f00000 0x00080000>; + read-only; + }; + + u-boot@7f80000 { + reg = <0x07f80000 0x00080000>; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + u-boot@0 { + reg = <0x0 0x02000000>; + read-only; + }; + + jffs2@2000000 { + reg = <0x02000000 0x10000000>; + }; + + ramdisk@12000000 { + reg = <0x12000000 0x08000000>; + read-only; + }; + + kernel@1a000000 { + reg = <0x1a000000 0x04000000>; + }; + + dtb@1e000000 { + reg = <0x1e000000 0x01000000>; + read-only; + }; + + empty@1f000000 { + reg = <0x1f000000 0x21000000>; + }; + }; + + board-control@3,0 { + compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis"; + reg = <0x3 0x0 0x30>; + }; + + nand@4,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x4 0x0 0x40000>; + }; + + nand@5,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x5 0x0 0x40000>; + }; + + nand@6,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x6 0x0 0x40000>; + }; +}; + +&board_soc { + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <3 1 0 0>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xCCCCCCCD>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x0001869B>; + fsl,max-adj = <249999999>; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; +}; + +&board_pci1 { + pcie@0 { + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + + // IDSEL 0x11 func 0 - PCI slot 1 + 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 1 - PCI slot 1 + 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 2 - PCI slot 1 + 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 3 - PCI slot 1 + 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 4 - PCI slot 1 + 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 5 - PCI slot 1 + 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 6 - PCI slot 1 + 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 7 - PCI slot 1 + 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x1d Audio + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 + + // IDSEL 0x1e Legacy + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 + >; + + uli1575@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <4 1 0 0>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0x0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <0x1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + + gpio@400 { + reg = <0x1 0x400 0x80>; + }; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts index 1d7a05f3021e..26759a591712 100644 --- a/arch/powerpc/boot/dts/p2020rdb.dts +++ b/arch/powerpc/boot/dts/p2020rdb.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "p2020si.dtsi" +/include/ "fsl/p2020si-pre.dtsi" / { model = "fsl,P2020RDB"; @@ -29,7 +29,8 @@ device_type = "memory"; }; - localbus@ffe05000 { + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; /* NOR and NAND Flashes */ ranges = <0x0 0x0 0x0 0xef000000 0x01000000 @@ -140,7 +141,9 @@ }; - soc@ffe00000 { + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + i2c@3000 { rtc@68 { compatible = "dallas,ds1339"; @@ -148,17 +151,13 @@ }; }; - spi@7000 { - - fsl_m25p80@0 { + spi@7000 { + flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,espi-flash"; + compatible = "spansion,s25sl12801"; reg = <0>; - linux,modalias = "fsl_m25p80"; - modal = "s25sl128b"; spi-max-frequency = <50000000>; - mode = <0>; partition@0 { /* 512KB for u-boot Bootloader Image */ @@ -202,15 +201,17 @@ mdio@24520 { phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; + interrupts = <3 1 0 0>; reg = <0x0>; - }; + }; phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; + interrupts = <3 1 0 0>; reg = <0x1>; - }; + }; + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; }; mdio@25520 { @@ -224,11 +225,7 @@ status = "disabled"; }; - ptp_clock@24E00 { - compatible = "fsl,etsec-ptp"; - reg = <0x24E00 0xB0>; - interrupts = <68 2 69 2 70 2>; - interrupt-parent = < &mpic >; + ptp_clock@24e00 { fsl,tclk-period = <5>; fsl,tmr-prsc = <200>; fsl,tmr-add = <0xCCCCCCCD>; @@ -252,29 +249,18 @@ phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; }; - }; pci0: pcie@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; status = "disabled"; }; pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; + pcie@0 { ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000 @@ -286,21 +272,10 @@ }; pci2: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 @@ -311,3 +286,5 @@ }; }; }; + +/include/ "fsl/p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts index fc8ddddfccb6..66aac864c4cc 100644 --- a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts +++ b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts @@ -14,28 +14,16 @@ * option) any later version. */ -/include/ "p2020si.dtsi" +/include/ "p2020rdb.dts" / { model = "fsl,P2020RDB"; compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP"; - aliases { - ethernet1 = &enet1; - ethernet2 = &enet2; - serial0 = &serial0; - pci0 = &pci0; - }; - cpus { PowerPC,P2020@1 { - status = "disabled"; + status = "disabled"; }; - - }; - - memory { - device_type = "memory"; }; localbus@ffe05000 { @@ -43,115 +31,18 @@ }; soc@ffe00000 { - i2c@3000 { - rtc@68 { - compatible = "dallas,ds1339"; - reg = <0x68>; - }; - }; - serial1: serial@4600 { status = "disabled"; }; - spi@7000 { - - fsl_m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,espi-flash"; - reg = <0>; - linux,modalias = "fsl_m25p80"; - modal = "s25sl128b"; - spi-max-frequency = <50000000>; - mode = <0>; - - partition@0 { - /* 512KB for u-boot Bootloader Image */ - reg = <0x0 0x00080000>; - label = "SPI (RO) U-Boot Image"; - read-only; - }; - - partition@80000 { - /* 512KB for DTB Image */ - reg = <0x00080000 0x00080000>; - label = "SPI (RO) DTB Image"; - read-only; - }; - - partition@100000 { - /* 4MB for Linux Kernel Image */ - reg = <0x00100000 0x00400000>; - label = "SPI (RO) Linux Kernel Image"; - read-only; - }; - - partition@500000 { - /* 4MB for Compressed RFS Image */ - reg = <0x00500000 0x00400000>; - label = "SPI (RO) Compressed RFS Image"; - read-only; - }; - - partition@900000 { - /* 7MB for JFFS2 based RFS */ - reg = <0x00900000 0x00700000>; - label = "SPI (RW) JFFS2 RFS"; - }; - }; - }; - dma@c300 { status = "disabled"; }; - usb@22000 { - phy_type = "ulpi"; - }; - - mdio@24520 { - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x1>; - }; - }; - - mdio@25520 { - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26520 { - status = "disabled"; - }; - enet0: ethernet@24000 { status = "disabled"; }; - enet1: ethernet@25000 { - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "sgmii"; - - }; - - enet2: ethernet@26000 { - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - }; - - mpic: pic@40000 { protected-sources = < 42 76 77 78 79 /* serial1 , dma2 */ @@ -164,40 +55,12 @@ msi@41600 { status = "disabled"; }; - - }; pci0: pcie@ffe08000 { status = "disabled"; }; - pci1: pcie@ffe09000 { - ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - pci2: pcie@ffe0a000 { status = "disabled"; }; diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts index 261c34ba45ec..9bd8ef493dd2 100644 --- a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts +++ b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts @@ -15,28 +15,18 @@ * option) any later version. */ -/include/ "p2020si.dtsi" +/include/ "p2020rdb.dts" / { model = "fsl,P2020RDB"; compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP"; - aliases { - ethernet0 = &enet0; - serial0 = &serial1; - pci1 = &pci1; - }; - cpus { PowerPC,P2020@0 { - status = "disabled"; + status = "disabled"; }; }; - memory { - device_type = "memory"; - }; - localbus@ffe05000 { status = "disabled"; }; @@ -70,55 +60,10 @@ status = "disabled"; }; - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0xc300 0x4>; - ranges = <0x0 0xc100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <76 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <77 2>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <78 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <79 2>; - }; - }; - gpio: gpio-controller@f000 { status = "disabled"; }; - L2: l2-cache-controller@20000 { - compatible = "fsl,p2020-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2,512K - interrupt-parent = <&mpic>; - }; - dma@21300 { status = "disabled"; }; @@ -139,12 +84,6 @@ status = "disabled"; }; - enet0: ethernet@24000 { - fixed-link = <1 1 1000 0 0>; - phy-connection-type = "rgmii-id"; - - }; - enet1: ethernet@25000 { status = "disabled"; }; @@ -170,22 +109,6 @@ >; }; - msi@41600 { - compatible = "fsl,p2020-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - global-utilities@e0000 { //global utilities block status = "disabled"; }; @@ -199,30 +122,4 @@ pci1: pcie@ffe09000 { status = "disabled"; }; - - pci2: pcie@ffe0a000 { - ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; }; diff --git a/arch/powerpc/boot/dts/p2020si.dtsi b/arch/powerpc/boot/dts/p2020si.dtsi deleted file mode 100644 index 6def17f265d3..000000000000 --- a/arch/powerpc/boot/dts/p2020si.dtsi +++ /dev/null @@ -1,382 +0,0 @@ -/* - * P2020 Device Tree Source - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/dts-v1/; -/ { - compatible = "fsl,P2020"; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,P2020@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - - PowerPC,P2020@1 { - device_type = "cpu"; - reg = <0x1>; - next-level-cache = <&L2>; - }; - }; - - localbus@ffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus"; - reg = <0 0xffe05000 0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; - }; - - soc@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,p2020-immr", "simple-bus"; - ranges = <0x0 0x0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p2020-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,p2020-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - spi@7000 { - cell-index = <0>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2>; - interrupt-parent = <&mpic>; - mode = "cpu"; - }; - - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0xc300 0x4>; - ranges = <0x0 0xc100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <76 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <77 2>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <78 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <79 2>; - }; - }; - - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,mpc8572-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2>; - interrupt-parent = <&mpic>; - gpio-controller; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,p2020-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2,512K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - usb@22000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <28 0x2>; - }; - - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x26520 0x20>; - }; - - mdio@26520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; - - }; - - enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - - }; - - sdhci@2e000 { - compatible = "fsl,p2020-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2>; - interrupt-parent = <&mpic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - - crypto@30000 { - compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", - "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 58 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xbfe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,p2020-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,p2020-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - }; - - pci0: pcie@ffe08000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe08000 0 0x1000>; - bus-range = <0 255>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; - }; - - pci1: pcie@ffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe09000 0 0x1000>; - bus-range = <0 255>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; - }; - - pci2: pcie@ffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe0a000 0 0x1000>; - bus-range = <0 255>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 2>; - }; -}; diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts index 79b6895027c0..4f957db01230 100644 --- a/arch/powerpc/boot/dts/p2041rdb.dts +++ b/arch/powerpc/boot/dts/p2041rdb.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "p2041si.dtsi" +/include/ "fsl/p2041si-pre.dtsi" / { model = "fsl,P2041RDB"; @@ -50,6 +50,8 @@ }; soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; spi@110000 { flash@0 { #address-cells = <1>; @@ -106,7 +108,18 @@ }; }; - localbus@ffe124000 { + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x1000>; ranges = <0 0 0xf 0xe8000000 0x08000000>; @@ -122,6 +135,7 @@ reg = <0xf 0xfe200000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + fsl,msi = <&msi0>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -137,6 +151,7 @@ reg = <0xf 0xfe201000 0 0x1000>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + fsl,msi = <&msi1>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -152,6 +167,7 @@ reg = <0xf 0xfe202000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + fsl,msi = <&msi2>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -163,3 +179,5 @@ }; }; }; + +/include/ "fsl/p2041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2041si.dtsi b/arch/powerpc/boot/dts/p2041si.dtsi deleted file mode 100644 index f7492edd0dfd..000000000000 --- a/arch/powerpc/boot/dts/p2041si.dtsi +++ /dev/null @@ -1,692 +0,0 @@ -/* - * P2041 Silicon Device Tree Source - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Freescale Semiconductor nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/dts-v1/; - -/ { - compatible = "fsl,P2041"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&mpic>; - - aliases { - ccsr = &soc; - dcsr = &dcsr; - - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - serial3 = &serial3; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - usb0 = &usb0; - usb1 = &usb1; - dma0 = &dma0; - dma1 = &dma1; - sdhc = &sdhc; - msi0 = &msi0; - msi1 = &msi1; - msi2 = &msi2; - - crypto = &crypto; - sec_jr0 = &sec_jr0; - sec_jr1 = &sec_jr1; - sec_jr2 = &sec_jr2; - sec_jr3 = &sec_jr3; - rtic_a = &rtic_a; - rtic_b = &rtic_b; - rtic_c = &rtic_c; - rtic_d = &rtic_d; - sec_mon = &sec_mon; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: PowerPC,e500mc@0 { - device_type = "cpu"; - reg = <0>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu1: PowerPC,e500mc@1 { - device_type = "cpu"; - reg = <1>; - next-level-cache = <&L2_1>; - L2_1: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu2: PowerPC,e500mc@2 { - device_type = "cpu"; - reg = <2>; - next-level-cache = <&L2_2>; - L2_2: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu3: PowerPC,e500mc@3 { - device_type = "cpu"; - reg = <3>; - next-level-cache = <&L2_3>; - L2_3: l2-cache { - next-level-cache = <&cpc>; - }; - }; - }; - - dcsr: dcsr@f00000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,dcsr", "simple-bus"; - - dcsr-epu@0 { - compatible = "fsl,dcsr-epu"; - interrupts = <52 2 0 0 - 84 2 0 0 - 85 2 0 0>; - interrupt-parent = <&mpic>; - reg = <0x0 0x1000>; - }; - dcsr-npc { - compatible = "fsl,dcsr-npc"; - reg = <0x1000 0x1000 0x1000000 0x8000>; - }; - dcsr-nxc@2000 { - compatible = "fsl,dcsr-nxc"; - reg = <0x2000 0x1000>; - }; - dcsr-corenet { - compatible = "fsl,dcsr-corenet"; - reg = <0x8000 0x1000 0xB0000 0x1000>; - }; - dcsr-dpaa@9000 { - compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa"; - reg = <0x9000 0x1000>; - }; - dcsr-ocn@11000 { - compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn"; - reg = <0x11000 0x1000>; - }; - dcsr-ddr@12000 { - compatible = "fsl,dcsr-ddr"; - dev-handle = <&ddr>; - reg = <0x12000 0x1000>; - }; - dcsr-nal@18000 { - compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal"; - reg = <0x18000 0x1000>; - }; - dcsr-rcpm@22000 { - compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm"; - reg = <0x22000 0x1000>; - }; - dcsr-cpu-sb-proxy@40000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu0>; - reg = <0x40000 0x1000>; - }; - dcsr-cpu-sb-proxy@41000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu1>; - reg = <0x41000 0x1000>; - }; - dcsr-cpu-sb-proxy@42000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu2>; - reg = <0x42000 0x1000>; - }; - dcsr-cpu-sb-proxy@43000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu3>; - reg = <0x43000 0x1000>; - }; - }; - - soc: soc@ffe000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x00000000 0xf 0xfe000000 0x1000000>; - reg = <0xf 0xfe000000 0 0x00001000>; - - soc-sram-error { - compatible = "fsl,soc-sram-error"; - interrupts = <16 2 1 29>; - }; - - corenet-law@0 { - compatible = "fsl,corenet-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <32>; - }; - - ddr: memory-controller@8000 { - compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; - reg = <0x8000 0x1000>; - interrupts = <16 2 1 23>; - }; - - cpc: l3-cache-controller@10000 { - compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; - reg = <0x10000 0x1000>; - interrupts = <16 2 1 27>; - }; - - corenet-cf@18000 { - compatible = "fsl,corenet-cf"; - reg = <0x18000 0x1000>; - interrupts = <16 2 1 31>; - fsl,ccf-num-csdids = <32>; - fsl,ccf-num-snoopids = <32>; - }; - - iommu@20000 { - compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x4000>; - interrupts = < - 24 2 0 0 - 16 2 1 30>; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <4>; - reg = <0x40000 0x40000>; - compatible = "fsl,mpic", "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi0: msi@41600 { - compatible = "fsl,mpic-msi"; - reg = <0x41600 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0>; - }; - - msi1: msi@41800 { - compatible = "fsl,mpic-msi"; - reg = <0x41800 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe8 0 0 0 - 0xe9 0 0 0 - 0xea 0 0 0 - 0xeb 0 0 0 - 0xec 0 0 0 - 0xed 0 0 0 - 0xee 0 0 0 - 0xef 0 0 0>; - }; - - msi2: msi@41a00 { - compatible = "fsl,mpic-msi"; - reg = <0x41a00 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xf0 0 0 0 - 0xf1 0 0 0 - 0xf2 0 0 0 - 0xf3 0 0 0 - 0xf4 0 0 0 - 0xf5 0 0 0 - 0xf6 0 0 0 - 0xf7 0 0 0>; - }; - - guts: global-utilities@e0000 { - compatible = "fsl,qoriq-device-config-1.0"; - reg = <0xe0000 0xe00>; - fsl,has-rstcr; - #sleep-cells = <1>; - fsl,liodn-bits = <12>; - }; - - pins: global-utilities@e0e00 { - compatible = "fsl,qoriq-pin-control-1.0"; - reg = <0xe0e00 0x200>; - #sleep-cells = <2>; - }; - - clockgen: global-utilities@e1000 { - compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0"; - reg = <0xe1000 0x1000>; - clock-frequency = <0>; - }; - - rcpm: global-utilities@e2000 { - compatible = "fsl,qoriq-rcpm-1.0"; - reg = <0xe2000 0x1000>; - #sleep-cells = <1>; - }; - - sfp: sfp@e8000 { - compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0"; - reg = <0xe8000 0x1000>; - }; - - serdes: serdes@ea000 { - compatible = "fsl,p2041-serdes"; - reg = <0xea000 0x1000>; - }; - - dma0: dma@100300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p2041-dma", "fsl,eloplus-dma"; - reg = <0x100300 0x4>; - ranges = <0x0 0x100100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,p2041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <28 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p2041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <29 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p2041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <30 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p2041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <31 2 0 0>; - }; - }; - - dma1: dma@101300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p2041-dma", "fsl,eloplus-dma"; - reg = <0x101300 0x4>; - ranges = <0x0 0x101100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,p2041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <32 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p2041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <33 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p2041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <34 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p2041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <35 2 0 0>; - }; - }; - - spi@110000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,p2041-espi", "fsl,mpc8536-espi"; - reg = <0x110000 0x1000>; - interrupts = <53 0x2 0 0>; - fsl,espi-num-chipselects = <4>; - }; - - sdhc: sdhc@114000 { - compatible = "fsl,p2041-esdhc", "fsl,esdhc"; - reg = <0x114000 0x1000>; - interrupts = <48 2 0 0>; - sdhci,auto-cmd12; - clock-frequency = <0>; - }; - - i2c@118000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x118000 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@118100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x118100 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@119000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <2>; - compatible = "fsl-i2c"; - reg = <0x119000 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - i2c@119100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <3>; - compatible = "fsl-i2c"; - reg = <0x119100 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - serial0: serial@11c500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c500 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial1: serial@11c600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c600 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial2: serial@11d500 { - cell-index = <2>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d500 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - serial3: serial@11d600 { - cell-index = <3>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d600 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - gpio0: gpio@130000 { - compatible = "fsl,p2041-gpio", "fsl,qoriq-gpio"; - reg = <0x130000 0x1000>; - interrupts = <55 2 0 0>; - #gpio-cells = <2>; - gpio-controller; - }; - - usb0: usb@210000 { - compatible = "fsl,p2041-usb2-mph", - "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - reg = <0x210000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <44 0x2 0 0>; - phy_type = "utmi"; - port0; - }; - - usb1: usb@211000 { - compatible = "fsl,p2041-usb2-dr", - "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - reg = <0x211000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <45 0x2 0 0>; - phy_type = "utmi"; - }; - - sata@220000 { - compatible = "fsl,p2041-sata", "fsl,pq-sata-v2"; - reg = <0x220000 0x1000>; - interrupts = <68 0x2 0 0>; - }; - - sata@221000 { - compatible = "fsl,p2041-sata", "fsl,pq-sata-v2"; - reg = <0x221000 0x1000>; - interrupts = <69 0x2 0 0>; - }; - - crypto: crypto@300000 { - compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x300000 0x10000>; - ranges = <0 0x300000 0x10000>; - interrupts = <92 2 0 0>; - - sec_jr0: jr@1000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupts = <88 2 0 0>; - }; - - sec_jr1: jr@2000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupts = <89 2 0 0>; - }; - - sec_jr2: jr@3000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupts = <90 2 0 0>; - }; - - sec_jr3: jr@4000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x4000 0x1000>; - interrupts = <91 2 0 0>; - }; - - rtic@6000 { - compatible = "fsl,sec-v4.2-rtic", - "fsl,sec-v4.0-rtic"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x6000 0x100>; - ranges = <0x0 0x6100 0xe00>; - - rtic_a: rtic-a@0 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x80>; - }; - - rtic_b: rtic-b@20 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x80>; - }; - - rtic_c: rtic-c@40 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x80>; - }; - - rtic_d: rtic-d@60 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x500 0x80>; - }; - }; - }; - - sec_mon: sec_mon@314000 { - compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon"; - reg = <0x314000 0x1000>; - interrupts = <93 2 0 0>; - }; - - }; - - localbus@ffe124000 { - compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus"; - interrupts = <25 2 0 0>; - #address-cells = <2>; - #size-cells = <1>; - }; - - pci0: pcie@ffe200000 { - compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <33333333>; - fsl,msi = <&msi0>; - interrupts = <16 2 1 15>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 15>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 40 1 0 0 - 0000 0 0 2 &mpic 1 1 0 0 - 0000 0 0 3 &mpic 2 1 0 0 - 0000 0 0 4 &mpic 3 1 0 0 - >; - }; - }; - - pci1: pcie@ffe201000 { - compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0 0xff>; - clock-frequency = <33333333>; - fsl,msi = <&msi1>; - interrupts = <16 2 1 14>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 14>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 41 1 0 0 - 0000 0 0 2 &mpic 5 1 0 0 - 0000 0 0 3 &mpic 6 1 0 0 - 0000 0 0 4 &mpic 7 1 0 0 - >; - }; - }; - - pci2: pcie@ffe202000 { - compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <33333333>; - fsl,msi = <&msi2>; - interrupts = <16 2 1 13>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 13>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 42 1 0 0 - 0000 0 0 2 &mpic 9 1 0 0 - 0000 0 0 3 &mpic 10 1 0 0 - 0000 0 0 4 &mpic 11 1 0 0 - >; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts index bbd113b49a8f..f469145abaeb 100644 --- a/arch/powerpc/boot/dts/p3041ds.dts +++ b/arch/powerpc/boot/dts/p3041ds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "p3041si.dtsi" +/include/ "fsl/p3041si-pre.dtsi" / { model = "fsl,P3041DS"; @@ -50,6 +50,8 @@ }; soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; spi@110000 { flash@0 { #address-cells = <1>; @@ -99,7 +101,18 @@ }; }; - localbus@ffe124000 { + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x1000>; ranges = <0 0 0xf 0xe8000000 0x08000000 2 0 0xf 0xffa00000 0x00040000 @@ -160,6 +173,7 @@ reg = <0xf 0xfe200000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + fsl,msi = <&msi0>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -175,6 +189,7 @@ reg = <0xf 0xfe201000 0 0x1000>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + fsl,msi = <&msi1>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -190,6 +205,7 @@ reg = <0xf 0xfe202000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + fsl,msi = <&msi2>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -205,6 +221,7 @@ reg = <0xf 0xfe203000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + fsl,msi = <&msi2>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -216,3 +233,5 @@ }; }; }; + +/include/ "fsl/p3041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p3041si.dtsi b/arch/powerpc/boot/dts/p3041si.dtsi deleted file mode 100644 index 87130b732bc7..000000000000 --- a/arch/powerpc/boot/dts/p3041si.dtsi +++ /dev/null @@ -1,729 +0,0 @@ -/* - * P3041 Silicon Device Tree Source - * - * Copyright 2010-2011 Freescale Semiconductor Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Freescale Semiconductor nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/dts-v1/; - -/ { - compatible = "fsl,P3041"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&mpic>; - - aliases { - ccsr = &soc; - dcsr = &dcsr; - - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - serial3 = &serial3; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - pci3 = &pci3; - usb0 = &usb0; - usb1 = &usb1; - dma0 = &dma0; - dma1 = &dma1; - sdhc = &sdhc; - msi0 = &msi0; - msi1 = &msi1; - msi2 = &msi2; - - crypto = &crypto; - sec_jr0 = &sec_jr0; - sec_jr1 = &sec_jr1; - sec_jr2 = &sec_jr2; - sec_jr3 = &sec_jr3; - rtic_a = &rtic_a; - rtic_b = &rtic_b; - rtic_c = &rtic_c; - rtic_d = &rtic_d; - sec_mon = &sec_mon; - -/* - rio0 = &rapidio0; - */ - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: PowerPC,e500mc@0 { - device_type = "cpu"; - reg = <0>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu1: PowerPC,e500mc@1 { - device_type = "cpu"; - reg = <1>; - next-level-cache = <&L2_1>; - L2_1: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu2: PowerPC,e500mc@2 { - device_type = "cpu"; - reg = <2>; - next-level-cache = <&L2_2>; - L2_2: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu3: PowerPC,e500mc@3 { - device_type = "cpu"; - reg = <3>; - next-level-cache = <&L2_3>; - L2_3: l2-cache { - next-level-cache = <&cpc>; - }; - }; - }; - - dcsr: dcsr@f00000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,dcsr", "simple-bus"; - - dcsr-epu@0 { - compatible = "fsl,dcsr-epu"; - interrupts = <52 2 0 0 - 84 2 0 0 - 85 2 0 0>; - interrupt-parent = <&mpic>; - reg = <0x0 0x1000>; - }; - dcsr-npc { - compatible = "fsl,dcsr-npc"; - reg = <0x1000 0x1000 0x1000000 0x8000>; - }; - dcsr-nxc@2000 { - compatible = "fsl,dcsr-nxc"; - reg = <0x2000 0x1000>; - }; - dcsr-corenet { - compatible = "fsl,dcsr-corenet"; - reg = <0x8000 0x1000 0xB0000 0x1000>; - }; - dcsr-dpaa@9000 { - compatible = "fsl,p43041-dcsr-dpaa", "fsl,dcsr-dpaa"; - reg = <0x9000 0x1000>; - }; - dcsr-ocn@11000 { - compatible = "fsl,p43041-dcsr-ocn", "fsl,dcsr-ocn"; - reg = <0x11000 0x1000>; - }; - dcsr-ddr@12000 { - compatible = "fsl,dcsr-ddr"; - dev-handle = <&ddr>; - reg = <0x12000 0x1000>; - }; - dcsr-nal@18000 { - compatible = "fsl,p43041-dcsr-nal", "fsl,dcsr-nal"; - reg = <0x18000 0x1000>; - }; - dcsr-rcpm@22000 { - compatible = "fsl,p43041-dcsr-rcpm", "fsl,dcsr-rcpm"; - reg = <0x22000 0x1000>; - }; - dcsr-cpu-sb-proxy@40000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu0>; - reg = <0x40000 0x1000>; - }; - dcsr-cpu-sb-proxy@41000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu1>; - reg = <0x41000 0x1000>; - }; - dcsr-cpu-sb-proxy@42000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu2>; - reg = <0x42000 0x1000>; - }; - dcsr-cpu-sb-proxy@43000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu3>; - reg = <0x43000 0x1000>; - }; - }; - - soc: soc@ffe000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x00000000 0xf 0xfe000000 0x1000000>; - reg = <0xf 0xfe000000 0 0x00001000>; - - soc-sram-error { - compatible = "fsl,soc-sram-error"; - interrupts = <16 2 1 29>; - }; - - corenet-law@0 { - compatible = "fsl,corenet-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <32>; - }; - - ddr: memory-controller@8000 { - compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; - reg = <0x8000 0x1000>; - interrupts = <16 2 1 23>; - }; - - cpc: l3-cache-controller@10000 { - compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; - reg = <0x10000 0x1000>; - interrupts = <16 2 1 27>; - }; - - corenet-cf@18000 { - compatible = "fsl,corenet-cf"; - reg = <0x18000 0x1000>; - interrupts = <16 2 1 31>; - fsl,ccf-num-csdids = <32>; - fsl,ccf-num-snoopids = <32>; - }; - - iommu@20000 { - compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x4000>; - interrupts = < - 24 2 0 0 - 16 2 1 30>; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <4>; - reg = <0x40000 0x40000>; - compatible = "fsl,mpic", "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi0: msi@41600 { - compatible = "fsl,mpic-msi"; - reg = <0x41600 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0>; - }; - - msi1: msi@41800 { - compatible = "fsl,mpic-msi"; - reg = <0x41800 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe8 0 0 0 - 0xe9 0 0 0 - 0xea 0 0 0 - 0xeb 0 0 0 - 0xec 0 0 0 - 0xed 0 0 0 - 0xee 0 0 0 - 0xef 0 0 0>; - }; - - msi2: msi@41a00 { - compatible = "fsl,mpic-msi"; - reg = <0x41a00 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xf0 0 0 0 - 0xf1 0 0 0 - 0xf2 0 0 0 - 0xf3 0 0 0 - 0xf4 0 0 0 - 0xf5 0 0 0 - 0xf6 0 0 0 - 0xf7 0 0 0>; - }; - - guts: global-utilities@e0000 { - compatible = "fsl,qoriq-device-config-1.0"; - reg = <0xe0000 0xe00>; - fsl,has-rstcr; - #sleep-cells = <1>; - fsl,liodn-bits = <12>; - }; - - pins: global-utilities@e0e00 { - compatible = "fsl,qoriq-pin-control-1.0"; - reg = <0xe0e00 0x200>; - #sleep-cells = <2>; - }; - - clockgen: global-utilities@e1000 { - compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0"; - reg = <0xe1000 0x1000>; - clock-frequency = <0>; - }; - - rcpm: global-utilities@e2000 { - compatible = "fsl,qoriq-rcpm-1.0"; - reg = <0xe2000 0x1000>; - #sleep-cells = <1>; - }; - - sfp: sfp@e8000 { - compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0"; - reg = <0xe8000 0x1000>; - }; - - serdes: serdes@ea000 { - compatible = "fsl,p3041-serdes"; - reg = <0xea000 0x1000>; - }; - - dma0: dma@100300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p3041-dma", "fsl,eloplus-dma"; - reg = <0x100300 0x4>; - ranges = <0x0 0x100100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <28 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <29 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <30 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <31 2 0 0>; - }; - }; - - dma1: dma@101300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p3041-dma", "fsl,eloplus-dma"; - reg = <0x101300 0x4>; - ranges = <0x0 0x101100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <32 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <33 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <34 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <35 2 0 0>; - }; - }; - - spi@110000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,p3041-espi", "fsl,mpc8536-espi"; - reg = <0x110000 0x1000>; - interrupts = <53 0x2 0 0>; - fsl,espi-num-chipselects = <4>; - }; - - sdhc: sdhc@114000 { - compatible = "fsl,p3041-esdhc", "fsl,esdhc"; - reg = <0x114000 0x1000>; - interrupts = <48 2 0 0>; - sdhci,auto-cmd12; - clock-frequency = <0>; - }; - - i2c@118000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x118000 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@118100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x118100 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@119000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <2>; - compatible = "fsl-i2c"; - reg = <0x119000 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - i2c@119100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <3>; - compatible = "fsl-i2c"; - reg = <0x119100 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - serial0: serial@11c500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c500 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial1: serial@11c600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c600 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial2: serial@11d500 { - cell-index = <2>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d500 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - serial3: serial@11d600 { - cell-index = <3>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d600 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - gpio0: gpio@130000 { - compatible = "fsl,p3041-gpio", "fsl,qoriq-gpio"; - reg = <0x130000 0x1000>; - interrupts = <55 2 0 0>; - #gpio-cells = <2>; - gpio-controller; - }; - - usb0: usb@210000 { - compatible = "fsl,p3041-usb2-mph", - "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - reg = <0x210000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <44 0x2 0 0>; - phy_type = "utmi"; - port0; - }; - - usb1: usb@211000 { - compatible = "fsl,p3041-usb2-dr", - "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - reg = <0x211000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <45 0x2 0 0>; - dr_mode = "host"; - phy_type = "utmi"; - }; - - sata@220000 { - compatible = "fsl,p3041-sata", "fsl,pq-sata-v2"; - reg = <0x220000 0x1000>; - interrupts = <68 0x2 0 0>; - }; - - sata@221000 { - compatible = "fsl,p3041-sata", "fsl,pq-sata-v2"; - reg = <0x221000 0x1000>; - interrupts = <69 0x2 0 0>; - }; - - crypto: crypto@300000 { - compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x300000 0x10000>; - ranges = <0 0x300000 0x10000>; - interrupts = <92 2 0 0>; - - sec_jr0: jr@1000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupts = <88 2 0 0>; - }; - - sec_jr1: jr@2000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupts = <89 2 0 0>; - }; - - sec_jr2: jr@3000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupts = <90 2 0 0>; - }; - - sec_jr3: jr@4000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x4000 0x1000>; - interrupts = <91 2 0 0>; - }; - - rtic@6000 { - compatible = "fsl,sec-v4.2-rtic", - "fsl,sec-v4.0-rtic"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x6000 0x100>; - ranges = <0x0 0x6100 0xe00>; - - rtic_a: rtic-a@0 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x80>; - }; - - rtic_b: rtic-b@20 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x80>; - }; - - rtic_c: rtic-c@40 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x80>; - }; - - rtic_d: rtic-d@60 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x500 0x80>; - }; - }; - }; - - sec_mon: sec_mon@314000 { - compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon"; - reg = <0x314000 0x1000>; - interrupts = <93 2 0 0>; - }; - }; - -/* - rapidio0: rapidio@ffe0c0000 -*/ - - localbus@ffe124000 { - compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus"; - interrupts = <25 2 0 0>; - #address-cells = <2>; - #size-cells = <1>; - }; - - pci0: pcie@ffe200000 { - compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi0>; - interrupts = <16 2 1 15>; - - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 15>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 40 1 0 0 - 0000 0 0 2 &mpic 1 1 0 0 - 0000 0 0 3 &mpic 2 1 0 0 - 0000 0 0 4 &mpic 3 1 0 0 - >; - }; - }; - - pci1: pcie@ffe201000 { - compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi1>; - interrupts = <16 2 1 14>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 14>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 41 1 0 0 - 0000 0 0 2 &mpic 5 1 0 0 - 0000 0 0 3 &mpic 6 1 0 0 - 0000 0 0 4 &mpic 7 1 0 0 - >; - }; - }; - - pci2: pcie@ffe202000 { - compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi2>; - interrupts = <16 2 1 13>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 13>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 42 1 0 0 - 0000 0 0 2 &mpic 9 1 0 0 - 0000 0 0 3 &mpic 10 1 0 0 - 0000 0 0 4 &mpic 11 1 0 0 - >; - }; - }; - - pci3: pcie@ffe203000 { - compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi2>; - interrupts = <16 2 1 12>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 12>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 43 1 0 0 - 0000 0 0 2 &mpic 0 1 0 0 - 0000 0 0 3 &mpic 4 1 0 0 - 0000 0 0 4 &mpic 8 1 0 0 - >; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/p3060qds.dts b/arch/powerpc/boot/dts/p3060qds.dts index 08b9193213e7..529042e4b9a2 100644 --- a/arch/powerpc/boot/dts/p3060qds.dts +++ b/arch/powerpc/boot/dts/p3060qds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "p3060si.dtsi" +/include/ "fsl/p3060si-pre.dtsi" / { model = "fsl,P3060QDS"; @@ -50,6 +50,8 @@ }; soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; spi@110000 { flash@0 { #address-cells = <1>; @@ -138,7 +140,7 @@ }; }; - rapidio@ffe0c0000 { + rio: rapidio@ffe0c0000 { reg = <0xf 0xfe0c0000 0 0x11000>; port1 { @@ -149,7 +151,7 @@ }; }; - localbus@ffe124000 { + lbc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x1000>; ranges = <0 0 0xf 0xe8000000 0x08000000 2 0 0xf 0xffa00000 0x00040000 @@ -210,6 +212,7 @@ reg = <0xf 0xfe200000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + fsl,msi = <&msi0>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -225,6 +228,7 @@ reg = <0xf 0xfe201000 0 0x1000>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + fsl,msi = <&msi1>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -236,3 +240,5 @@ }; }; }; + +/include/ "fsl/p3060si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p3060si.dtsi b/arch/powerpc/boot/dts/p3060si.dtsi deleted file mode 100644 index 68947e157bbc..000000000000 --- a/arch/powerpc/boot/dts/p3060si.dtsi +++ /dev/null @@ -1,719 +0,0 @@ -/* - * P3060 Silicon Device Tree Source - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Freescale Semiconductor nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/dts-v1/; - -/ { - compatible = "fsl,P3060"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&mpic>; - - aliases { - ccsr = &soc; - dcsr = &dcsr; - - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - serial3 = &serial3; - pci0 = &pci0; - pci1 = &pci1; - usb0 = &usb0; - usb1 = &usb1; - dma0 = &dma0; - dma1 = &dma1; - msi0 = &msi0; - msi1 = &msi1; - msi2 = &msi2; - - crypto = &crypto; - sec_jr0 = &sec_jr0; - sec_jr1 = &sec_jr1; - sec_jr2 = &sec_jr2; - sec_jr3 = &sec_jr3; - rtic_a = &rtic_a; - rtic_b = &rtic_b; - rtic_c = &rtic_c; - rtic_d = &rtic_d; - sec_mon = &sec_mon; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: PowerPC,e500mc@0 { - device_type = "cpu"; - reg = <0>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu1: PowerPC,e500mc@1 { - device_type = "cpu"; - reg = <1>; - next-level-cache = <&L2_1>; - L2_1: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu4: PowerPC,e500mc@4 { - device_type = "cpu"; - reg = <4>; - next-level-cache = <&L2_4>; - L2_4: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu5: PowerPC,e500mc@5 { - device_type = "cpu"; - reg = <5>; - next-level-cache = <&L2_5>; - L2_5: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu6: PowerPC,e500mc@6 { - device_type = "cpu"; - reg = <6>; - next-level-cache = <&L2_6>; - L2_6: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu7: PowerPC,e500mc@7 { - device_type = "cpu"; - reg = <7>; - next-level-cache = <&L2_7>; - L2_7: l2-cache { - next-level-cache = <&cpc>; - }; - }; - }; - - dcsr: dcsr@f00000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,dcsr", "simple-bus"; - - dcsr-epu@0 { - compatible = "fsl,dcsr-epu"; - interrupts = <52 2 0 0 - 84 2 0 0 - 85 2 0 0>; - interrupt-parent = <&mpic>; - reg = <0x0 0x1000>; - }; - dcsr-npc { - compatible = "fsl,dcsr-npc"; - reg = <0x1000 0x1000 0x1000000 0x8000>; - }; - dcsr-nxc@2000 { - compatible = "fsl,dcsr-nxc"; - reg = <0x2000 0x1000>; - }; - dcsr-corenet { - compatible = "fsl,dcsr-corenet"; - reg = <0x8000 0x1000 0xB0000 0x1000>; - }; - dcsr-dpaa@9000 { - compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa"; - reg = <0x9000 0x1000>; - }; - dcsr-ocn@11000 { - compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn"; - reg = <0x11000 0x1000>; - }; - dcsr-ddr@12000 { - compatible = "fsl,dcsr-ddr"; - dev-handle = <&ddr>; - reg = <0x12000 0x1000>; - }; - dcsr-nal@18000 { - compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal"; - reg = <0x18000 0x1000>; - }; - dcsr-rcpm@22000 { - compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm"; - reg = <0x22000 0x1000>; - }; - dcsr-cpu-sb-proxy@40000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu0>; - reg = <0x40000 0x1000>; - }; - dcsr-cpu-sb-proxy@41000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu1>; - reg = <0x41000 0x1000>; - }; - dcsr-cpu-sb-proxy@44000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu4>; - reg = <0x44000 0x1000>; - }; - dcsr-cpu-sb-proxy@45000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu5>; - reg = <0x45000 0x1000>; - }; - dcsr-cpu-sb-proxy@46000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu6>; - reg = <0x46000 0x1000>; - }; - dcsr-cpu-sb-proxy@47000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu7>; - reg = <0x47000 0x1000>; - }; - }; - - soc: soc@ffe000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x00000000 0xf 0xfe000000 0x1000000>; - reg = <0xf 0xfe000000 0 0x00001000>; - - soc-sram-error { - compatible = "fsl,soc-sram-error"; - interrupts = <16 2 1 29>; - }; - - corenet-law@0 { - compatible = "fsl,corenet-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <32>; - }; - - ddr: memory-controller@8000 { - compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller"; - reg = <0x8000 0x1000>; - interrupts = <16 2 1 23>; - }; - - cpc: l3-cache-controller@10000 { - compatible = "fsl,p3060-l3-cache-controller", "cache"; - reg = <0x10000 0x1000 - 0x11000 0x1000>; - interrupts = <16 2 1 27>; - }; - - corenet-cf@18000 { - compatible = "fsl,corenet-cf"; - reg = <0x18000 0x1000>; - interrupts = <16 2 1 31>; - fsl,ccf-num-csdids = <32>; - fsl,ccf-num-snoopids = <32>; - }; - - iommu@20000 { - compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x5000>; - interrupts = < - 24 2 0 0 - 16 2 1 30>; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <4>; - reg = <0x40000 0x40000>; - compatible = "fsl,mpic", "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi0: msi@41600 { - compatible = "fsl,mpic-msi"; - reg = <0x41600 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0>; - }; - - msi1: msi@41800 { - compatible = "fsl,mpic-msi"; - reg = <0x41800 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe8 0 0 0 - 0xe9 0 0 0 - 0xea 0 0 0 - 0xeb 0 0 0 - 0xec 0 0 0 - 0xed 0 0 0 - 0xee 0 0 0 - 0xef 0 0 0>; - }; - - msi2: msi@41a00 { - compatible = "fsl,mpic-msi"; - reg = <0x41a00 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xf0 0 0 0 - 0xf1 0 0 0 - 0xf2 0 0 0 - 0xf3 0 0 0 - 0xf4 0 0 0 - 0xf5 0 0 0 - 0xf6 0 0 0 - 0xf7 0 0 0>; - }; - - rmu: rmu@d3000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,srio-rmu"; - reg = <0xd3000 0x500>; - ranges = <0x0 0xd3000 0x500>; - - message-unit@0 { - compatible = "fsl,srio-msg-unit"; - reg = <0x0 0x100>; - interrupts = < - 60 2 0 0 /* msg1_tx_irq */ - 61 2 0 0>;/* msg1_rx_irq */ - }; - message-unit@100 { - compatible = "fsl,srio-msg-unit"; - reg = <0x100 0x100>; - interrupts = < - 62 2 0 0 /* msg2_tx_irq */ - 63 2 0 0>;/* msg2_rx_irq */ - }; - doorbell-unit@400 { - compatible = "fsl,srio-dbell-unit"; - reg = <0x400 0x80>; - interrupts = < - 56 2 0 0 /* bell_outb_irq */ - 57 2 0 0>;/* bell_inb_irq */ - }; - port-write-unit@4e0 { - compatible = "fsl,srio-port-write-unit"; - reg = <0x4e0 0x20>; - interrupts = <16 2 1 11>; - }; - }; - - guts: global-utilities@e0000 { - compatible = "fsl,qoriq-device-config-1.0"; - reg = <0xe0000 0xe00>; - fsl,has-rstcr; - #sleep-cells = <1>; - fsl,liodn-bits = <12>; - }; - - pins: global-utilities@e0e00 { - compatible = "fsl,qoriq-pin-control-1.0"; - reg = <0xe0e00 0x200>; - #sleep-cells = <2>; - }; - - clockgen: global-utilities@e1000 { - compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0"; - reg = <0xe1000 0x1000>; - clock-frequency = <0>; - }; - - rcpm: global-utilities@e2000 { - compatible = "fsl,qoriq-rcpm-1.0"; - reg = <0xe2000 0x1000>; - #sleep-cells = <1>; - }; - - sfp: sfp@e8000 { - compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0"; - reg = <0xe8000 0x1000>; - }; - - serdes: serdes@ea000 { - compatible = "fsl,p3060-serdes"; - reg = <0xea000 0x1000>; - }; - - dma0: dma@100300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p3060-dma", "fsl,eloplus-dma"; - reg = <0x100300 0x4>; - ranges = <0x0 0x100100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,p3060-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <28 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p3060-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <29 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p3060-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <30 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p3060-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <31 2 0 0>; - }; - }; - - dma1: dma@101300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p3060-dma", "fsl,eloplus-dma"; - reg = <0x101300 0x4>; - ranges = <0x0 0x101100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,p3060-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <32 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p3060-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <33 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p3060-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <34 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p3060-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <35 2 0 0>; - }; - }; - - spi@110000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,p3060-espi", "fsl,mpc8536-espi"; - reg = <0x110000 0x1000>; - interrupts = <53 0x2 0 0>; - fsl,espi-num-chipselects = <4>; - }; - - i2c@118000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x118000 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@118100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x118100 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@119000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <2>; - compatible = "fsl-i2c"; - reg = <0x119000 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - i2c@119100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <3>; - compatible = "fsl-i2c"; - reg = <0x119100 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - serial0: serial@11c500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c500 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial1: serial@11c600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c600 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial2: serial@11d500 { - cell-index = <2>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d500 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - serial3: serial@11d600 { - cell-index = <3>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d600 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - gpio0: gpio@130000 { - compatible = "fsl,p3060-gpio", "fsl,qoriq-gpio"; - reg = <0x130000 0x1000>; - interrupts = <55 2 0 0>; - #gpio-cells = <2>; - gpio-controller; - }; - - usb0: usb@210000 { - compatible = "fsl,p3060-usb2-mph", - "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - reg = <0x210000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <44 0x2 0 0>; - }; - - usb1: usb@211000 { - compatible = "fsl,p3060-usb2-dr", - "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - reg = <0x211000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <45 0x2 0 0>; - }; - - crypto: crypto@300000 { - compatible = "fsl,sec-v4.1", "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x300000 0x10000>; - ranges = <0 0x300000 0x10000>; - interrupt-parent = <&mpic>; - interrupts = <92 2 0 0>; - - sec_jr0: jr@1000 { - compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <88 2 0 0>; - }; - - sec_jr1: jr@2000 { - compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <89 2 0 0>; - }; - - sec_jr2: jr@3000 { - compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <90 2 0 0>; - }; - - sec_jr3: jr@4000 { - compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x4000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <91 2 0 0>; - }; - - rtic@6000 { - compatible = "fsl,sec-v4.1-rtic", "fsl,sec-v4.0-rtic"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x6000 0x100>; - ranges = <0x0 0x6100 0xe00>; - - rtic_a: rtic-a@0 { - compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x80>; - }; - - rtic_b: rtic-b@20 { - compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x80>; - }; - - rtic_c: rtic-c@40 { - compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x80>; - }; - - rtic_d: rtic-d@60 { - compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x500 0x80>; - }; - }; - }; - - sec_mon: sec_mon@314000 { - compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon"; - reg = <0x314000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <93 2 0 0>; - }; - }; - - rapidio@ffe0c0000 { - compatible = "fsl,srio"; - interrupts = <16 2 1 11>; - #address-cells = <2>; - #size-cells = <2>; - fsl,srio-rmu-handle = <&rmu>; - ranges; - - port1 { - #address-cells = <2>; - #size-cells = <2>; - cell-index = <1>; - }; - - port2 { - #address-cells = <2>; - #size-cells = <2>; - cell-index = <2>; - }; - }; - - localbus@ffe124000 { - compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus"; - interrupts = <25 2 0 0>; - #address-cells = <2>; - #size-cells = <1>; - }; - - pci0: pcie@ffe200000 { - compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <33333333>; - fsl,msi = <&msi0>; - interrupts = <16 2 1 15>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 15>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 40 1 0 0 - 0000 0 0 2 &mpic 1 1 0 0 - 0000 0 0 3 &mpic 2 1 0 0 - 0000 0 0 4 &mpic 3 1 0 0 - >; - }; - }; - - pci1: pcie@ffe201000 { - compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0 0xff>; - clock-frequency = <33333333>; - fsl,msi = <&msi1>; - interrupts = <16 2 1 14>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 14>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 41 1 0 0 - 0000 0 0 2 &mpic 5 1 0 0 - 0000 0 0 3 &mpic 6 1 0 0 - 0000 0 0 4 &mpic 7 1 0 0 - >; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts index c7916dc28014..6d60e54e50a0 100644 --- a/arch/powerpc/boot/dts/p4080ds.dts +++ b/arch/powerpc/boot/dts/p4080ds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "p4080si.dtsi" +/include/ "fsl/p4080si-pre.dtsi" / { model = "fsl,P4080DS"; @@ -50,6 +50,9 @@ }; soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { flash@0 { #address-cells = <1>; @@ -105,12 +108,18 @@ }; }; - rapidio0: rapidio@ffe0c0000 { - reg = <0xf 0xfe0c0000 0 0x20000>; - ranges = <0 0 0xc 0x20000000 0 0x01000000>; + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; }; - localbus@ffe124000 { + lbc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x1000>; ranges = <0 0 0xf 0xe8000000 0x08000000 3 0 0xf 0xffdf0000 0x00008000>; @@ -132,6 +141,7 @@ reg = <0xf 0xfe200000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + fsl,msi = <&msi0>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -147,6 +157,7 @@ reg = <0xf 0xfe201000 0 0x1000>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + fsl,msi = <&msi1>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -162,6 +173,7 @@ reg = <0xf 0xfe202000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + fsl,msi = <&msi2>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -174,3 +186,5 @@ }; }; + +/include/ "fsl/p4080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p4080si.dtsi b/arch/powerpc/boot/dts/p4080si.dtsi deleted file mode 100644 index f20c01ab2473..000000000000 --- a/arch/powerpc/boot/dts/p4080si.dtsi +++ /dev/null @@ -1,755 +0,0 @@ -/* - * P4080 Silicon Device Tree Source - * - * Copyright 2009-2011 Freescale Semiconductor Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Freescale Semiconductor nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/dts-v1/; - -/ { - compatible = "fsl,P4080"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&mpic>; - - aliases { - ccsr = &soc; - dcsr = &dcsr; - - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - serial3 = &serial3; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - usb0 = &usb0; - usb1 = &usb1; - dma0 = &dma0; - dma1 = &dma1; - sdhc = &sdhc; - msi0 = &msi0; - msi1 = &msi1; - msi2 = &msi2; - - crypto = &crypto; - sec_jr0 = &sec_jr0; - sec_jr1 = &sec_jr1; - sec_jr2 = &sec_jr2; - sec_jr3 = &sec_jr3; - rtic_a = &rtic_a; - rtic_b = &rtic_b; - rtic_c = &rtic_c; - rtic_d = &rtic_d; - sec_mon = &sec_mon; - - rio0 = &rapidio0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: PowerPC,e500mc@0 { - device_type = "cpu"; - reg = <0>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu1: PowerPC,e500mc@1 { - device_type = "cpu"; - reg = <1>; - next-level-cache = <&L2_1>; - L2_1: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu2: PowerPC,e500mc@2 { - device_type = "cpu"; - reg = <2>; - next-level-cache = <&L2_2>; - L2_2: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu3: PowerPC,e500mc@3 { - device_type = "cpu"; - reg = <3>; - next-level-cache = <&L2_3>; - L2_3: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu4: PowerPC,e500mc@4 { - device_type = "cpu"; - reg = <4>; - next-level-cache = <&L2_4>; - L2_4: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu5: PowerPC,e500mc@5 { - device_type = "cpu"; - reg = <5>; - next-level-cache = <&L2_5>; - L2_5: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu6: PowerPC,e500mc@6 { - device_type = "cpu"; - reg = <6>; - next-level-cache = <&L2_6>; - L2_6: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu7: PowerPC,e500mc@7 { - device_type = "cpu"; - reg = <7>; - next-level-cache = <&L2_7>; - L2_7: l2-cache { - next-level-cache = <&cpc>; - }; - }; - }; - - dcsr: dcsr@f00000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,dcsr", "simple-bus"; - - dcsr-epu@0 { - compatible = "fsl,dcsr-epu"; - interrupts = <52 2 0 0 - 84 2 0 0 - 85 2 0 0>; - interrupt-parent = <&mpic>; - reg = <0x0 0x1000>; - }; - dcsr-npc { - compatible = "fsl,dcsr-npc"; - reg = <0x1000 0x1000 0x1000000 0x8000>; - }; - dcsr-nxc@2000 { - compatible = "fsl,dcsr-nxc"; - reg = <0x2000 0x1000>; - }; - dcsr-corenet { - compatible = "fsl,dcsr-corenet"; - reg = <0x8000 0x1000 0xB0000 0x1000>; - }; - dcsr-dpaa@9000 { - compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa"; - reg = <0x9000 0x1000>; - }; - dcsr-ocn@11000 { - compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn"; - reg = <0x11000 0x1000>; - }; - dcsr-ddr@12000 { - compatible = "fsl,dcsr-ddr"; - dev-handle = <&ddr1>; - reg = <0x12000 0x1000>; - }; - dcsr-ddr@13000 { - compatible = "fsl,dcsr-ddr"; - dev-handle = <&ddr2>; - reg = <0x13000 0x1000>; - }; - dcsr-nal@18000 { - compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal"; - reg = <0x18000 0x1000>; - }; - dcsr-rcpm@22000 { - compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm"; - reg = <0x22000 0x1000>; - }; - dcsr-cpu-sb-proxy@40000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu0>; - reg = <0x40000 0x1000>; - }; - dcsr-cpu-sb-proxy@41000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu1>; - reg = <0x41000 0x1000>; - }; - dcsr-cpu-sb-proxy@42000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu2>; - reg = <0x42000 0x1000>; - }; - dcsr-cpu-sb-proxy@43000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu3>; - reg = <0x43000 0x1000>; - }; - dcsr-cpu-sb-proxy@44000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu4>; - reg = <0x44000 0x1000>; - }; - dcsr-cpu-sb-proxy@45000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu5>; - reg = <0x45000 0x1000>; - }; - dcsr-cpu-sb-proxy@46000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu6>; - reg = <0x46000 0x1000>; - }; - dcsr-cpu-sb-proxy@47000 { - compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu7>; - reg = <0x47000 0x1000>; - }; - }; - - soc: soc@ffe000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x00000000 0xf 0xfe000000 0x1000000>; - reg = <0xf 0xfe000000 0 0x00001000>; - - soc-sram-error { - compatible = "fsl,soc-sram-error"; - interrupts = <16 2 1 29>; - }; - - corenet-law@0 { - compatible = "fsl,corenet-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <32>; - }; - - ddr1: memory-controller@8000 { - compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller"; - reg = <0x8000 0x1000>; - interrupts = <16 2 1 23>; - }; - - ddr2: memory-controller@9000 { - compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller"; - reg = <0x9000 0x1000>; - interrupts = <16 2 1 22>; - }; - - cpc: l3-cache-controller@10000 { - compatible = "fsl,p4080-l3-cache-controller", "cache"; - reg = <0x10000 0x1000 - 0x11000 0x1000>; - interrupts = <16 2 1 27 - 16 2 1 26>; - }; - - corenet-cf@18000 { - compatible = "fsl,corenet-cf"; - reg = <0x18000 0x1000>; - interrupts = <16 2 1 31>; - fsl,ccf-num-csdids = <32>; - fsl,ccf-num-snoopids = <32>; - }; - - iommu@20000 { - compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x5000>; - interrupts = < - 24 2 0 0 - 16 2 1 30>; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <4>; - reg = <0x40000 0x40000>; - compatible = "fsl,mpic", "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi0: msi@41600 { - compatible = "fsl,mpic-msi"; - reg = <0x41600 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0>; - }; - - msi1: msi@41800 { - compatible = "fsl,mpic-msi"; - reg = <0x41800 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe8 0 0 0 - 0xe9 0 0 0 - 0xea 0 0 0 - 0xeb 0 0 0 - 0xec 0 0 0 - 0xed 0 0 0 - 0xee 0 0 0 - 0xef 0 0 0>; - }; - - msi2: msi@41a00 { - compatible = "fsl,mpic-msi"; - reg = <0x41a00 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xf0 0 0 0 - 0xf1 0 0 0 - 0xf2 0 0 0 - 0xf3 0 0 0 - 0xf4 0 0 0 - 0xf5 0 0 0 - 0xf6 0 0 0 - 0xf7 0 0 0>; - }; - - guts: global-utilities@e0000 { - compatible = "fsl,qoriq-device-config-1.0"; - reg = <0xe0000 0xe00>; - fsl,has-rstcr; - #sleep-cells = <1>; - fsl,liodn-bits = <12>; - }; - - pins: global-utilities@e0e00 { - compatible = "fsl,qoriq-pin-control-1.0"; - reg = <0xe0e00 0x200>; - #sleep-cells = <2>; - }; - - clockgen: global-utilities@e1000 { - compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0"; - reg = <0xe1000 0x1000>; - clock-frequency = <0>; - }; - - rcpm: global-utilities@e2000 { - compatible = "fsl,qoriq-rcpm-1.0"; - reg = <0xe2000 0x1000>; - #sleep-cells = <1>; - }; - - sfp: sfp@e8000 { - compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0"; - reg = <0xe8000 0x1000>; - }; - - serdes: serdes@ea000 { - compatible = "fsl,p4080-serdes"; - reg = <0xea000 0x1000>; - }; - - dma0: dma@100300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p4080-dma", "fsl,eloplus-dma"; - reg = <0x100300 0x4>; - ranges = <0x0 0x100100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <28 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <29 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <30 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <31 2 0 0>; - }; - }; - - dma1: dma@101300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p4080-dma", "fsl,eloplus-dma"; - reg = <0x101300 0x4>; - ranges = <0x0 0x101100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <32 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <33 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <34 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <35 2 0 0>; - }; - }; - - spi@110000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,p4080-espi", "fsl,mpc8536-espi"; - reg = <0x110000 0x1000>; - interrupts = <53 0x2 0 0>; - fsl,espi-num-chipselects = <4>; - }; - - sdhc: sdhc@114000 { - compatible = "fsl,p4080-esdhc", "fsl,esdhc"; - reg = <0x114000 0x1000>; - interrupts = <48 2 0 0>; - voltage-ranges = <3300 3300>; - sdhci,auto-cmd12; - clock-frequency = <0>; - }; - - i2c@118000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x118000 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@118100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x118100 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@119000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <2>; - compatible = "fsl-i2c"; - reg = <0x119000 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - i2c@119100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <3>; - compatible = "fsl-i2c"; - reg = <0x119100 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - serial0: serial@11c500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c500 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial1: serial@11c600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c600 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial2: serial@11d500 { - cell-index = <2>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d500 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - serial3: serial@11d600 { - cell-index = <3>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d600 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - gpio0: gpio@130000 { - compatible = "fsl,p4080-gpio", "fsl,qoriq-gpio"; - reg = <0x130000 0x1000>; - interrupts = <55 2 0 0>; - #gpio-cells = <2>; - gpio-controller; - }; - - usb0: usb@210000 { - compatible = "fsl,p4080-usb2-mph", - "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - reg = <0x210000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <44 0x2 0 0>; - }; - - usb1: usb@211000 { - compatible = "fsl,p4080-usb2-dr", - "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - reg = <0x211000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <45 0x2 0 0>; - }; - - crypto: crypto@300000 { - compatible = "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x300000 0x10000>; - ranges = <0 0x300000 0x10000>; - interrupt-parent = <&mpic>; - interrupts = <92 2 0 0>; - - sec_jr0: jr@1000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <88 2 0 0>; - }; - - sec_jr1: jr@2000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <89 2 0 0>; - }; - - sec_jr2: jr@3000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <90 2 0 0>; - }; - - sec_jr3: jr@4000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x4000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <91 2 0 0>; - }; - - rtic@6000 { - compatible = "fsl,sec-v4.0-rtic"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x6000 0x100>; - ranges = <0x0 0x6100 0xe00>; - - rtic_a: rtic-a@0 { - compatible = "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x80>; - }; - - rtic_b: rtic-b@20 { - compatible = "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x80>; - }; - - rtic_c: rtic-c@40 { - compatible = "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x80>; - }; - - rtic_d: rtic-d@60 { - compatible = "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x500 0x80>; - }; - }; - }; - - sec_mon: sec_mon@314000 { - compatible = "fsl,sec-v4.0-mon"; - reg = <0x314000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <93 2 0 0>; - }; - }; - - rapidio0: rapidio@ffe0c0000 { - #address-cells = <2>; - #size-cells = <2>; - compatible = "fsl,rapidio-delta"; - interrupts = < - 16 2 1 11 /* err_irq */ - 56 2 0 0 /* bell_outb_irq */ - 57 2 0 0 /* bell_inb_irq */ - 60 2 0 0 /* msg1_tx_irq */ - 61 2 0 0 /* msg1_rx_irq */ - 62 2 0 0 /* msg2_tx_irq */ - 63 2 0 0>; /* msg2_rx_irq */ - }; - - localbus@ffe124000 { - compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus"; - interrupts = <25 2 0 0>; - #address-cells = <2>; - #size-cells = <1>; - }; - - pci0: pcie@ffe200000 { - compatible = "fsl,p4080-pcie"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi0>; - interrupts = <16 2 1 15>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 15>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 40 1 0 0 - 0000 0 0 2 &mpic 1 1 0 0 - 0000 0 0 3 &mpic 2 1 0 0 - 0000 0 0 4 &mpic 3 1 0 0 - >; - }; - }; - - pci1: pcie@ffe201000 { - compatible = "fsl,p4080-pcie"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi1>; - interrupts = <16 2 1 14>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 14>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 41 1 0 0 - 0000 0 0 2 &mpic 5 1 0 0 - 0000 0 0 3 &mpic 6 1 0 0 - 0000 0 0 4 &mpic 7 1 0 0 - >; - }; - }; - - pci2: pcie@ffe202000 { - compatible = "fsl,p4080-pcie"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi2>; - interrupts = <16 2 1 13>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 13>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 42 1 0 0 - 0000 0 0 2 &mpic 9 1 0 0 - 0000 0 0 3 &mpic 10 1 0 0 - 0000 0 0 4 &mpic 11 1 0 0 - >; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts index e6d40999ccd7..1c250684c902 100644 --- a/arch/powerpc/boot/dts/p5020ds.dts +++ b/arch/powerpc/boot/dts/p5020ds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "p5020si.dtsi" +/include/ "fsl/p5020si-pre.dtsi" / { model = "fsl,P5020DS"; @@ -50,6 +50,8 @@ }; soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; spi@110000 { flash@0 { #address-cells = <1>; @@ -99,7 +101,18 @@ }; }; - localbus@ffe124000 { + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x1000>; ranges = <0 0 0xf 0xe8000000 0x08000000 2 0 0xf 0xffa00000 0x00040000 @@ -160,7 +173,7 @@ reg = <0xf 0xfe200000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; - + fsl,msi = <&msi0>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -176,6 +189,7 @@ reg = <0xf 0xfe201000 0 0x1000>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + fsl,msi = <&msi1>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -191,6 +205,7 @@ reg = <0xf 0xfe202000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + fsl,msi = <&msi2>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -206,6 +221,7 @@ reg = <0xf 0xfe203000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + fsl,msi = <&msi2>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -217,3 +233,5 @@ }; }; }; + +/include/ "fsl/p5020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p5020si.dtsi b/arch/powerpc/boot/dts/p5020si.dtsi deleted file mode 100644 index e7948ad71fa3..000000000000 --- a/arch/powerpc/boot/dts/p5020si.dtsi +++ /dev/null @@ -1,716 +0,0 @@ -/* - * P5020 Silicon Device Tree Source - * - * Copyright 2010-2011 Freescale Semiconductor Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Freescale Semiconductor nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/dts-v1/; - -/ { - compatible = "fsl,P5020"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&mpic>; - - aliases { - ccsr = &soc; - dcsr = &dcsr; - - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - serial3 = &serial3; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - pci3 = &pci3; - usb0 = &usb0; - usb1 = &usb1; - dma0 = &dma0; - dma1 = &dma1; - sdhc = &sdhc; - msi0 = &msi0; - msi1 = &msi1; - msi2 = &msi2; - - crypto = &crypto; - sec_jr0 = &sec_jr0; - sec_jr1 = &sec_jr1; - sec_jr2 = &sec_jr2; - sec_jr3 = &sec_jr3; - rtic_a = &rtic_a; - rtic_b = &rtic_b; - rtic_c = &rtic_c; - rtic_d = &rtic_d; - sec_mon = &sec_mon; - -/* - rio0 = &rapidio0; - */ - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: PowerPC,e5500@0 { - device_type = "cpu"; - reg = <0>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu1: PowerPC,e5500@1 { - device_type = "cpu"; - reg = <1>; - next-level-cache = <&L2_1>; - L2_1: l2-cache { - next-level-cache = <&cpc>; - }; - }; - }; - - dcsr: dcsr@f00000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,dcsr", "simple-bus"; - - dcsr-epu@0 { - compatible = "fsl,dcsr-epu"; - interrupts = <52 2 0 0 - 84 2 0 0 - 85 2 0 0>; - interrupt-parent = <&mpic>; - reg = <0x0 0x1000>; - }; - dcsr-npc { - compatible = "fsl,dcsr-npc"; - reg = <0x1000 0x1000 0x1000000 0x8000>; - }; - dcsr-nxc@2000 { - compatible = "fsl,dcsr-nxc"; - reg = <0x2000 0x1000>; - }; - dcsr-corenet { - compatible = "fsl,dcsr-corenet"; - reg = <0x8000 0x1000 0xB0000 0x1000>; - }; - dcsr-dpaa@9000 { - compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa"; - reg = <0x9000 0x1000>; - }; - dcsr-ocn@11000 { - compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn"; - reg = <0x11000 0x1000>; - }; - dcsr-ddr@12000 { - compatible = "fsl,dcsr-ddr"; - dev-handle = <&ddr1>; - reg = <0x12000 0x1000>; - }; - dcsr-ddr@13000 { - compatible = "fsl,dcsr-ddr"; - dev-handle = <&ddr2>; - reg = <0x13000 0x1000>; - }; - dcsr-nal@18000 { - compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal"; - reg = <0x18000 0x1000>; - }; - dcsr-rcpm@22000 { - compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm"; - reg = <0x22000 0x1000>; - }; - dcsr-cpu-sb-proxy@40000 { - compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu0>; - reg = <0x40000 0x1000>; - }; - dcsr-cpu-sb-proxy@41000 { - compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; - cpu-handle = <&cpu1>; - reg = <0x41000 0x1000>; - }; - }; - - soc: soc@ffe000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x00000000 0xf 0xfe000000 0x1000000>; - reg = <0xf 0xfe000000 0 0x00001000>; - - soc-sram-error { - compatible = "fsl,soc-sram-error"; - interrupts = <16 2 1 29>; - }; - - corenet-law@0 { - compatible = "fsl,corenet-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <32>; - }; - - ddr1: memory-controller@8000 { - compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; - reg = <0x8000 0x1000>; - interrupts = <16 2 1 23>; - }; - - ddr2: memory-controller@9000 { - compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; - reg = <0x9000 0x1000>; - interrupts = <16 2 1 22>; - }; - - cpc: l3-cache-controller@10000 { - compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; - reg = <0x10000 0x1000 - 0x11000 0x1000>; - interrupts = <16 2 1 27 - 16 2 1 26>; - }; - - corenet-cf@18000 { - compatible = "fsl,corenet-cf"; - reg = <0x18000 0x1000>; - interrupts = <16 2 1 31>; - fsl,ccf-num-csdids = <32>; - fsl,ccf-num-snoopids = <32>; - }; - - iommu@20000 { - compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x4000>; - interrupts = < - 24 2 0 0 - 16 2 1 30>; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <4>; - reg = <0x40000 0x40000>; - compatible = "fsl,mpic", "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi0: msi@41600 { - compatible = "fsl,mpic-msi"; - reg = <0x41600 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0>; - }; - - msi1: msi@41800 { - compatible = "fsl,mpic-msi"; - reg = <0x41800 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe8 0 0 0 - 0xe9 0 0 0 - 0xea 0 0 0 - 0xeb 0 0 0 - 0xec 0 0 0 - 0xed 0 0 0 - 0xee 0 0 0 - 0xef 0 0 0>; - }; - - msi2: msi@41a00 { - compatible = "fsl,mpic-msi"; - reg = <0x41a00 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xf0 0 0 0 - 0xf1 0 0 0 - 0xf2 0 0 0 - 0xf3 0 0 0 - 0xf4 0 0 0 - 0xf5 0 0 0 - 0xf6 0 0 0 - 0xf7 0 0 0>; - }; - - guts: global-utilities@e0000 { - compatible = "fsl,qoriq-device-config-1.0"; - reg = <0xe0000 0xe00>; - fsl,has-rstcr; - #sleep-cells = <1>; - fsl,liodn-bits = <12>; - }; - - pins: global-utilities@e0e00 { - compatible = "fsl,qoriq-pin-control-1.0"; - reg = <0xe0e00 0x200>; - #sleep-cells = <2>; - }; - - clockgen: global-utilities@e1000 { - compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; - reg = <0xe1000 0x1000>; - clock-frequency = <0>; - }; - - rcpm: global-utilities@e2000 { - compatible = "fsl,qoriq-rcpm-1.0"; - reg = <0xe2000 0x1000>; - #sleep-cells = <1>; - }; - - sfp: sfp@e8000 { - compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0"; - reg = <0xe8000 0x1000>; - }; - - serdes: serdes@ea000 { - compatible = "fsl,p5020-serdes"; - reg = <0xea000 0x1000>; - }; - - dma0: dma@100300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p5020-dma", "fsl,eloplus-dma"; - reg = <0x100300 0x4>; - ranges = <0x0 0x100100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <28 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <29 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <30 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <31 2 0 0>; - }; - }; - - dma1: dma@101300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p5020-dma", "fsl,eloplus-dma"; - reg = <0x101300 0x4>; - ranges = <0x0 0x101100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <32 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <33 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <34 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <35 2 0 0>; - }; - }; - - spi@110000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,p5020-espi", "fsl,mpc8536-espi"; - reg = <0x110000 0x1000>; - interrupts = <53 0x2 0 0>; - fsl,espi-num-chipselects = <4>; - }; - - sdhc: sdhc@114000 { - compatible = "fsl,p5020-esdhc", "fsl,esdhc"; - reg = <0x114000 0x1000>; - interrupts = <48 2 0 0>; - sdhci,auto-cmd12; - clock-frequency = <0>; - }; - - i2c@118000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x118000 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@118100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x118100 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - - i2c@119000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <2>; - compatible = "fsl-i2c"; - reg = <0x119000 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - i2c@119100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <3>; - compatible = "fsl-i2c"; - reg = <0x119100 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - serial0: serial@11c500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c500 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial1: serial@11c600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c600 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial2: serial@11d500 { - cell-index = <2>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d500 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - serial3: serial@11d600 { - cell-index = <3>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d600 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - gpio0: gpio@130000 { - compatible = "fsl,p5020-gpio", "fsl,qoriq-gpio"; - reg = <0x130000 0x1000>; - interrupts = <55 2 0 0>; - #gpio-cells = <2>; - gpio-controller; - }; - - usb0: usb@210000 { - compatible = "fsl,p5020-usb2-mph", - "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - reg = <0x210000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <44 0x2 0 0>; - phy_type = "utmi"; - port0; - }; - - usb1: usb@211000 { - compatible = "fsl,p5020-usb2-dr", - "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - reg = <0x211000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <45 0x2 0 0>; - dr_mode = "host"; - phy_type = "utmi"; - }; - - sata@220000 { - compatible = "fsl,p5020-sata", "fsl,pq-sata-v2"; - reg = <0x220000 0x1000>; - interrupts = <68 0x2 0 0>; - }; - - sata@221000 { - compatible = "fsl,p5020-sata", "fsl,pq-sata-v2"; - reg = <0x221000 0x1000>; - interrupts = <69 0x2 0 0>; - }; - - crypto: crypto@300000 { - compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x300000 0x10000>; - ranges = <0 0x300000 0x10000>; - interrupts = <92 2 0 0>; - - sec_jr0: jr@1000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupts = <88 2 0 0>; - }; - - sec_jr1: jr@2000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupts = <89 2 0 0>; - }; - - sec_jr2: jr@3000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupts = <90 2 0 0>; - }; - - sec_jr3: jr@4000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x4000 0x1000>; - interrupts = <91 2 0 0>; - }; - - rtic@6000 { - compatible = "fsl,sec-v4.2-rtic", - "fsl,sec-v4.0-rtic"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x6000 0x100>; - ranges = <0x0 0x6100 0xe00>; - - rtic_a: rtic-a@0 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x80>; - }; - - rtic_b: rtic-b@20 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x80>; - }; - - rtic_c: rtic-c@40 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x80>; - }; - - rtic_d: rtic-d@60 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x500 0x80>; - }; - }; - }; - - sec_mon: sec_mon@314000 { - compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon"; - reg = <0x314000 0x1000>; - interrupts = <93 2 0 0>; - }; - }; - -/* - rapidio0: rapidio@ffe0c0000 -*/ - - localbus@ffe124000 { - compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus"; - interrupts = <25 2 0 0>; - #address-cells = <2>; - #size-cells = <1>; - }; - - pci0: pcie@ffe200000 { - compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi0>; - interrupts = <16 2 1 15>; - - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 15>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 40 1 0 0 - 0000 0 0 2 &mpic 1 1 0 0 - 0000 0 0 3 &mpic 2 1 0 0 - 0000 0 0 4 &mpic 3 1 0 0 - >; - }; - }; - - pci1: pcie@ffe201000 { - compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi1>; - interrupts = <16 2 1 14>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 14>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 41 1 0 0 - 0000 0 0 2 &mpic 5 1 0 0 - 0000 0 0 3 &mpic 6 1 0 0 - 0000 0 0 4 &mpic 7 1 0 0 - >; - }; - }; - - pci2: pcie@ffe202000 { - compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi2>; - interrupts = <16 2 1 13>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 13>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 42 1 0 0 - 0000 0 0 2 &mpic 9 1 0 0 - 0000 0 0 3 &mpic 10 1 0 0 - 0000 0 0 4 &mpic 11 1 0 0 - >; - }; - }; - - pci3: pcie@ffe203000 { - compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - bus-range = <0x0 0xff>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi2>; - interrupts = <16 2 1 12>; - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 12>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 43 1 0 0 - 0000 0 0 2 &mpic 0 1 0 0 - 0000 0 0 3 &mpic 4 1 0 0 - 0000 0 0 4 &mpic 8 1 0 0 - >; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts index 0dc90f9bd814..b1e45a8537a5 100644 --- a/arch/powerpc/boot/dts/sbc8349.dts +++ b/arch/powerpc/boot/dts/sbc8349.dts @@ -222,7 +222,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; @@ -232,7 +232,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 94a332251710..77be77116c2e 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -316,7 +316,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <0x2a 0x2>; @@ -326,7 +326,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <0x2a 0x2>; diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts index ee5538feb455..56bebce87842 100644 --- a/arch/powerpc/boot/dts/sbc8641d.dts +++ b/arch/powerpc/boot/dts/sbc8641d.dts @@ -347,7 +347,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; @@ -357,7 +357,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <28 2>; diff --git a/arch/powerpc/boot/dts/socrates.dts b/arch/powerpc/boot/dts/socrates.dts index 38c35404bdc3..134a5ff917e1 100644 --- a/arch/powerpc/boot/dts/socrates.dts +++ b/arch/powerpc/boot/dts/socrates.dts @@ -199,7 +199,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; @@ -209,7 +209,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/storcenter.dts b/arch/powerpc/boot/dts/storcenter.dts index eab680ce10da..2a555738517e 100644 --- a/arch/powerpc/boot/dts/storcenter.dts +++ b/arch/powerpc/boot/dts/storcenter.dts @@ -74,7 +74,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x20>; clock-frequency = <97553800>; /* Hz */ current-speed = <115200>; @@ -85,7 +85,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x20>; clock-frequency = <97553800>; /* Hz */ current-speed = <9600>; diff --git a/arch/powerpc/boot/dts/stxssa8555.dts b/arch/powerpc/boot/dts/stxssa8555.dts index 49efd44057d7..4f166b01c1b6 100644 --- a/arch/powerpc/boot/dts/stxssa8555.dts +++ b/arch/powerpc/boot/dts/stxssa8555.dts @@ -210,7 +210,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; @@ -220,7 +220,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts index 0a4cedbdcb55..ed264d9ae356 100644 --- a/arch/powerpc/boot/dts/tqm8540.dts +++ b/arch/powerpc/boot/dts/tqm8540.dts @@ -250,7 +250,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; @@ -260,7 +260,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts index f49d09181312..925242115814 100644 --- a/arch/powerpc/boot/dts/tqm8541.dts +++ b/arch/powerpc/boot/dts/tqm8541.dts @@ -224,7 +224,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; @@ -234,7 +234,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts index 9452c3c05114..6e1ac50852a4 100644 --- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts +++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts @@ -305,7 +305,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? current-speed = <115200>; @@ -316,7 +316,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? current-speed = <115200>; @@ -352,7 +352,7 @@ ranges = < 0 0x0 0xfc000000 0x04000000 // NOR FLASH bank 1 1 0x0 0xf8000000 0x08000000 // NOR FLASH bank 0 - 2 0x0 0xa3000000 0x00008000 // CAN (2 x i82527) + 2 0x0 0xa3000000 0x00008000 // CAN (2 x CC770) 3 0x0 0xa3010000 0x00008000 // NAND FLASH >; @@ -393,18 +393,27 @@ }; /* Note: CAN support needs be enabled in U-Boot */ - can0@2,0 { - compatible = "intel,82527"; // Bosch CC770 + can@2,0 { + compatible = "bosch,cc770"; // Bosch CC770 reg = <2 0x0 0x100>; interrupts = <4 1>; interrupt-parent = <&mpic>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; + bosch,clock-out-frequency = <16000000>; }; - can1@2,100 { - compatible = "intel,82527"; // Bosch CC770 + can@2,100 { + compatible = "bosch,cc770"; // Bosch CC770 reg = <2 0x100 0x100>; interrupts = <4 1>; interrupt-parent = <&mpic>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; }; /* Note: NAND support needs to be enabled in U-Boot */ diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts index 619776f72c90..161e75eac7f7 100644 --- a/arch/powerpc/boot/dts/tqm8548.dts +++ b/arch/powerpc/boot/dts/tqm8548.dts @@ -305,7 +305,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? current-speed = <115200>; @@ -316,7 +316,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? current-speed = <115200>; @@ -352,7 +352,7 @@ ranges = < 0 0x0 0xfc000000 0x04000000 // NOR FLASH bank 1 1 0x0 0xf8000000 0x08000000 // NOR FLASH bank 0 - 2 0x0 0xe3000000 0x00008000 // CAN (2 x i82527) + 2 0x0 0xe3000000 0x00008000 // CAN (2 x CC770) 3 0x0 0xe3010000 0x00008000 // NAND FLASH >; @@ -393,18 +393,27 @@ }; /* Note: CAN support needs be enabled in U-Boot */ - can0@2,0 { - compatible = "intel,82527"; // Bosch CC770 + can@2,0 { + compatible = "bosch,cc770"; // Bosch CC770 reg = <2 0x0 0x100>; interrupts = <4 1>; interrupt-parent = <&mpic>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; + bosch,clock-out-frequency = <16000000>; }; - can1@2,100 { - compatible = "intel,82527"; // Bosch CC770 + can@2,100 { + compatible = "bosch,cc770"; // Bosch CC770 reg = <2 0x100 0x100>; interrupts = <4 1>; interrupt-parent = <&mpic>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; }; /* Note: NAND support needs to be enabled in U-Boot */ diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts index 81bad8cd3756..aa6ff0d3dd9a 100644 --- a/arch/powerpc/boot/dts/tqm8555.dts +++ b/arch/powerpc/boot/dts/tqm8555.dts @@ -224,7 +224,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; @@ -234,7 +234,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/tqm8xx.dts b/arch/powerpc/boot/dts/tqm8xx.dts index f6da7ec49a8e..c3dba2518d8c 100644 --- a/arch/powerpc/boot/dts/tqm8xx.dts +++ b/arch/powerpc/boot/dts/tqm8xx.dts @@ -57,6 +57,7 @@ ranges = < 0x0 0x0 0x40000000 0x800000 + 0x3 0x0 0xc0000000 0x200 >; flash@0,0 { @@ -67,6 +68,30 @@ bank-width = <4>; device-width = <2>; }; + + /* Note: CAN support needs be enabled in U-Boot */ + can@3,0 { + compatible = "intc,82527"; + reg = <3 0x0 0x80>; + interrupts = <8 1>; + interrupt-parent = <&PIC>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; + bosch,clock-out-frequency = <16000000>; + }; + + can@3,100 { + compatible = "intc,82527"; + reg = <3 0x100 0x80>; + interrupts = <8 1>; + interrupt-parent = <&PIC>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; + }; }; soc@fff00000 { diff --git a/arch/powerpc/boot/dts/xcalibur1501.dts b/arch/powerpc/boot/dts/xcalibur1501.dts index ac0a617b4299..cc00f4ddd9a7 100644 --- a/arch/powerpc/boot/dts/xcalibur1501.dts +++ b/arch/powerpc/boot/dts/xcalibur1501.dts @@ -531,7 +531,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; @@ -542,7 +542,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/xpedite5200.dts b/arch/powerpc/boot/dts/xpedite5200.dts index c41a80c55e47..8fd7b7031357 100644 --- a/arch/powerpc/boot/dts/xpedite5200.dts +++ b/arch/powerpc/boot/dts/xpedite5200.dts @@ -333,7 +333,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; current-speed = <115200>; @@ -344,7 +344,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; current-speed = <115200>; diff --git a/arch/powerpc/boot/dts/xpedite5200_xmon.dts b/arch/powerpc/boot/dts/xpedite5200_xmon.dts index c0efcbb45137..0baa8283d08c 100644 --- a/arch/powerpc/boot/dts/xpedite5200_xmon.dts +++ b/arch/powerpc/boot/dts/xpedite5200_xmon.dts @@ -337,7 +337,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; current-speed = <9600>; @@ -348,7 +348,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; current-speed = <9600>; diff --git a/arch/powerpc/boot/dts/xpedite5301.dts b/arch/powerpc/boot/dts/xpedite5301.dts index db7faf5ebb39..53c1c6a9752f 100644 --- a/arch/powerpc/boot/dts/xpedite5301.dts +++ b/arch/powerpc/boot/dts/xpedite5301.dts @@ -441,7 +441,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; @@ -452,7 +452,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/xpedite5330.dts b/arch/powerpc/boot/dts/xpedite5330.dts index c364ca6ff7d0..215225983150 100644 --- a/arch/powerpc/boot/dts/xpedite5330.dts +++ b/arch/powerpc/boot/dts/xpedite5330.dts @@ -477,7 +477,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; @@ -488,7 +488,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <42 2>; diff --git a/arch/powerpc/boot/dts/xpedite5370.dts b/arch/powerpc/boot/dts/xpedite5370.dts index 7a8a4afd56cf..11dbda10d756 100644 --- a/arch/powerpc/boot/dts/xpedite5370.dts +++ b/arch/powerpc/boot/dts/xpedite5370.dts @@ -439,7 +439,7 @@ serial0: serial@4500 { cell-index = <0>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <42 2>; @@ -450,7 +450,7 @@ serial1: serial@4600 { cell-index = <1>; device_type = "serial"; - compatible = "ns16550"; + compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <42 2>; diff --git a/arch/powerpc/boot/treeboot-currituck.c b/arch/powerpc/boot/treeboot-currituck.c new file mode 100644 index 000000000000..925ae43b7467 --- /dev/null +++ b/arch/powerpc/boot/treeboot-currituck.c @@ -0,0 +1,119 @@ +/* + * Copyright © 2011 Tony Breeds IBM Corporation + * + * Based on earlier code: + * Copyright (C) Paul Mackerras 1997. + * + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * Copyright (c) 2003, 2004 Zultys Technologies + * + * Copyright 2007 David Gibson, IBM Corporation. + * Copyright 2010 Ben. Herrenschmidt, IBM Corporation. + * Copyright © 2011 David Kleikamp IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <stdarg.h> +#include <stddef.h> +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "reg.h" +#include "io.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" +#include "libfdt.h" + +BSS_STACK(4096); + +#define MAX_RANKS 0x4 +#define DDR3_MR0CF 0x80010011U + +static unsigned long long ibm_currituck_memsize; +static unsigned long long ibm_currituck_detect_memsize(void) +{ + u32 reg; + unsigned i; + unsigned long long memsize = 0; + + for(i = 0; i < MAX_RANKS; i++){ + reg = mfdcrx(DDR3_MR0CF + i); + + if (!(reg & 1)) + continue; + + reg &= 0x0000f000; + reg >>= 12; + memsize += (0x800000ULL << reg); + } + + return memsize; +} + +static void ibm_currituck_fixups(void) +{ + void *devp = finddevice("/"); + u32 dma_ranges[7]; + + dt_fixup_memory(0x0ULL, ibm_currituck_memsize); + + while ((devp = find_node_by_devtype(devp, "pci"))) { + if (getprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges)) < 0) { + printf("%s: Failed to get dma-ranges\r\n", __func__); + continue; + } + + dma_ranges[5] = ibm_currituck_memsize >> 32; + dma_ranges[6] = ibm_currituck_memsize & 0xffffffffUL; + + setprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges)); + } +} + +#define SPRN_PIR 0x11E /* Processor Indentification Register */ +void platform_init(void) +{ + unsigned long end_of_ram, avail_ram; + u32 pir_reg; + int node, size; + const u32 *timebase; + + ibm_currituck_memsize = ibm_currituck_detect_memsize(); + if (ibm_currituck_memsize >> 32) + end_of_ram = ~0UL; + else + end_of_ram = ibm_currituck_memsize; + avail_ram = end_of_ram - (unsigned long)_end; + + simple_alloc_init(_end, avail_ram, 128, 64); + platform_ops.fixups = ibm_currituck_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + pir_reg = mfspr(SPRN_PIR); + + /* Make sure FDT blob is sane */ + if (fdt_check_header(_dtb_start) != 0) + fatal("Invalid device tree blob\n"); + + node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type", + "cpu", sizeof("cpu")); + if (!node) + fatal("Cannot find cpu node\n"); + timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size); + if (timebase && (size == 4)) + timebase_period_ns = 1000000000 / *timebase; + + fdt_set_boot_cpuid_phys(_dtb_start, pir_reg); + fdt_init(_dtb_start); + + serial_console_init(); +} diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index c74531af72c0..f090e6d2907e 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -163,7 +163,7 @@ coff) link_address='0x500000' pie= ;; -miboot|uboot) +miboot|uboot*) # miboot and U-boot want just the bare bits, not an ELF binary ext=bin objflags="-O binary" @@ -244,6 +244,9 @@ gamecube|wii) link_address='0x600000' platformo="$object/$platform-head.o $object/$platform.o" ;; +treeboot-currituck) + link_address='0x1000000' + ;; treeboot-iss4xx-mpic) platformo="$object/treeboot-iss4xx.o" ;; @@ -257,6 +260,8 @@ vmz="$tmpdir/`basename \"$kernel\"`.$ext" if [ -z "$cacheit" -o ! -f "$vmz$gzip" -o "$vmz$gzip" -ot "$kernel" ]; then ${CROSS}objcopy $objflags "$kernel" "$vmz.$$" + strip_size=$(stat -c %s $vmz.$$) + if [ -n "$gzip" ]; then gzip -n -f -9 "$vmz.$$" fi @@ -266,6 +271,24 @@ if [ -z "$cacheit" -o ! -f "$vmz$gzip" -o "$vmz$gzip" -ot "$kernel" ]; then else vmz="$vmz.$$" fi +else + # Calculate the vmlinux.strip size + ${CROSS}objcopy $objflags "$kernel" "$vmz.$$" + strip_size=$(stat -c %s $vmz.$$) + rm -f $vmz.$$ +fi + +# Round the size to next higher MB limit +round_size=$(((strip_size + 0xfffff) & 0xfff00000)) + +round_size=0x$(printf "%x" $round_size) +link_addr=$(printf "%d" $link_address) + +if [ $link_addr -lt $strip_size ]; then + echo "INFO: Uncompressed kernel (size 0x$(printf "%x\n" $strip_size))" \ + "overlaps the address of the wrapper($link_address)" + echo "INFO: Fixing the link_address of wrapper to ($round_size)" + link_address=$round_size fi vmz="$vmz$gzip" @@ -291,6 +314,26 @@ uboot) fi exit 0 ;; +uboot-obs600) + rm -f "$ofile" + # obs600 wants a multi image with an initrd, so we need to put a fake + # one in even when building a "normal" image. + if [ -n "$initrd" ]; then + real_rd="$initrd" + else + real_rd=`mktemp` + echo "\0" >>"$real_rd" + fi + ${MKIMAGE} -A ppc -O linux -T multi -C gzip -a $membase -e $membase \ + $uboot_version -d "$vmz":"$real_rd":"$dtb" "$ofile" + if [ -z "$initrd" ]; then + rm -f "$real_rd" + fi + if [ -z "$cacheit" ]; then + rm -f "$vmz" + fi + exit 0 + ;; esac addsec() { diff --git a/arch/powerpc/configs/40x/klondike_defconfig b/arch/powerpc/configs/40x/klondike_defconfig new file mode 100644 index 000000000000..c0d228dc73dc --- /dev/null +++ b/arch/powerpc/configs/40x/klondike_defconfig @@ -0,0 +1,55 @@ +CONFIG_40x=y +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_WALNUT is not set +CONFIG_APM8018X=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_MATH_EMULATION=y +# CONFIG_MIGRATION is not set +# CONFIG_SUSPEND is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=35000 +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_SAS_ATTRS=y +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT4_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_CRAMFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y +CONFIG_AVERAGE=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_FTRACE is not set diff --git a/arch/powerpc/configs/40x/obs600_defconfig b/arch/powerpc/configs/40x/obs600_defconfig new file mode 100644 index 000000000000..91c110dad2d6 --- /dev/null +++ b/arch/powerpc/configs/40x/obs600_defconfig @@ -0,0 +1,83 @@ +CONFIG_40x=y +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +CONFIG_KALLSYMS_ALL=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_WALNUT is not set +CONFIG_OBS600=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MATH_EMULATION=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_CONNECTOR=y +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_NDFC=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=35000 +CONFIG_NETDEVICES=y +CONFIG_IBM_EMAC=y +CONFIG_IBM_EMAC_RXB=256 +CONFIG_IBM_EMAC_TXB=256 +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_IBM_IIC=y +CONFIG_SENSORS_LM75=y +CONFIG_THERMAL=y +# CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=y +CONFIG_EXT2_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_CRYPTO=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/powerpc/configs/44x/currituck_defconfig b/arch/powerpc/configs/44x/currituck_defconfig new file mode 100644 index 000000000000..4192322f8a7f --- /dev/null +++ b/arch/powerpc/configs/44x/currituck_defconfig @@ -0,0 +1,110 @@ +CONFIG_44x=y +CONFIG_SMP=y +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_SPARSE_IRQ=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_EXPERT=y +CONFIG_KALLSYMS_ALL=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PPC_47x=y +# CONFIG_EBONY is not set +CONFIG_CURRITUCK=y +CONFIG_HIGHMEM=y +CONFIG_HZ_100=y +CONFIG_MATH_EMULATION=y +CONFIG_IRQ_ALL_CPUS=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +# CONFIG_SUSPEND is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_CONNECTOR=y +CONFIG_MTD=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=35000 +# CONFIG_SCSI_PROC_FS is not set +CONFIG_BLK_DEV_SD=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +# CONFIG_SATA_PMP is not set +CONFIG_SATA_SIL24=y +# CONFIG_ATA_SFF is not set +CONFIG_NETDEVICES=y +CONFIG_E1000E=y +# CONFIG_NETDEV_10000 is not set +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_IBM_IIC=y +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_M41T80=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NLS_DEFAULT="n" +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEBUG_INFO=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +CONFIG_PPC_EARLY_DEBUG=y +CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x10000000 +CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x200 +CONFIG_CRYPTO=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set diff --git a/arch/powerpc/configs/44x/iss476-smp_defconfig b/arch/powerpc/configs/44x/iss476-smp_defconfig index a6eb6ad05b2d..ca00cf750d3e 100644 --- a/arch/powerpc/configs/44x/iss476-smp_defconfig +++ b/arch/powerpc/configs/44x/iss476-smp_defconfig @@ -25,7 +25,8 @@ CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="root=/dev/issblk0" # CONFIG_PCI is not set CONFIG_ADVANCED_OPTIONS=y -CONFIG_RELOCATABLE=y +CONFIG_NONSTATIC_KERNEL=y +CONFIG_DYNAMIC_MEMSTART=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y diff --git a/arch/powerpc/configs/chroma_defconfig b/arch/powerpc/configs/chroma_defconfig new file mode 100644 index 000000000000..acf7fb280464 --- /dev/null +++ b/arch/powerpc/configs/chroma_defconfig @@ -0,0 +1,307 @@ +CONFIG_PPC64=y +CONFIG_PPC_BOOK3E_64=y +# CONFIG_VIRT_CPU_ACCOUNTING is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=256 +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=19 +CONFIG_CGROUPS=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_CGROUP_MEM_RES_CTLR=y +CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y +CONFIG_NAMESPACES=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_INITRAMFS_COMPRESSION_GZIP=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +CONFIG_PERF_COUNTERS=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_SCOM_DEBUGFS=y +CONFIG_PPC_A2_DD2=y +CONFIG_KVM_GUEST=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_HZ_100=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_MISC=y +CONFIG_NUMA=y +# CONFIG_MIGRATION is not set +CONFIG_PPC_64K_PAGES=y +CONFIG_SCHED_SMT=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +# CONFIG_SECCOMP is not set +CONFIG_PCIEPORTBUS=y +# CONFIG_PCIEASPM is not set +CONFIG_PCI_MSI=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_STATISTICS=y +CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_NET_IPIP=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_IPV6=y +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y +CONFIG_INET6_IPCOMP=y +CONFIG_IPV6_MIP6=y +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y +CONFIG_IPV6_TUNNEL=y +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_PIMSM_V2=y +CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NET_TCPPROBE=y +# CONFIG_WIRELESS is not set +CONFIG_NET_9P=y +CONFIG_NET_9P_DEBUG=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_MTD=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_LE_BYTE_SWAP=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_CDROM_PKTCDVD=y +CONFIG_MISC_DEVICES=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SRP_ATTRS=y +CONFIG_ATA=y +CONFIG_SATA_AHCI=y +CONFIG_SATA_SIL24=y +CONFIG_SATA_MV=y +CONFIG_SATA_SIL=y +CONFIG_PATA_CMD64X=y +CONFIG_PATA_MARVELL=y +CONFIG_PATA_SIL680=y +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=y +CONFIG_DM_SNAPSHOT=y +CONFIG_DM_MIRROR=y +CONFIG_DM_ZERO=y +CONFIG_DM_UEVENT=y +CONFIG_NETDEVICES=y +CONFIG_TUN=y +CONFIG_E1000E=y +CONFIG_TIGON3=y +# CONFIG_WLAN is not set +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=1024 +# CONFIG_HWMON is not set +# CONFIG_VGA_ARB is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EDAC=y +CONFIG_EDAC_MM_EDAC=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1511=y +CONFIG_RTC_DRV_DS1553=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +# CONFIG_DNOTIFY is not set +CONFIG_FUSE_FS=y +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_CONFIGFS_FS=m +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_ROOT_NFS=y +CONFIG_CIFS=y +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_CRC_CCITT=m +CONFIG_CRC_T10DIF=y +CONFIG_LIBCRC32C=m +CONFIG_PRINTK_TIME=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_DEBUG_INFO=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_PPC_EMULATED_STATS=y +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +CONFIG_VIRQ_DEBUG=y +CONFIG_PPC_EARLY_DEBUG=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_LZO=m +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_VIRTUALIZATION=y diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index f087de6ec03f..f8aef205d222 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -37,6 +37,8 @@ CONFIG_FSL_LBC=y CONFIG_PCI=y CONFIG_PCIEPORTBUS=y # CONFIG_PCIEASPM is not set +CONFIG_RAPIDIO=y +CONFIG_FSL_RIO=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -94,17 +96,17 @@ CONFIG_SATA_SIL24=y CONFIG_SATA_SIL=y CONFIG_PATA_SIL680=y CONFIG_NETDEVICES=y -CONFIG_VITESSE_PHY=y -CONFIG_FIXED_PHY=y -CONFIG_NET_ETHERNET=y +CONFIG_FSL_PQ_MDIO=y CONFIG_E1000=y CONFIG_E1000E=y -CONFIG_FSL_PQ_MDIO=y +CONFIG_VITESSE_PHY=y +CONFIG_FIXED_PHY=y # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set CONFIG_SERIO_LIBPS2=y # CONFIG_LEGACY_PTYS is not set +CONFIG_PPC_EPAPR_HV_BYTECHAN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_EXTENDED=y @@ -155,6 +157,7 @@ CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index 782822c32d15..7ed8d4cf2719 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -23,6 +23,8 @@ CONFIG_P5020_DS=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m +CONFIG_RAPIDIO=y +CONFIG_FSL_RIO=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -57,7 +59,6 @@ CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y -CONFIG_NET_ETHERNET=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set @@ -81,6 +82,7 @@ CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_PROC_KCORE=y CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_PARTITION_ADVANCED=y CONFIG_MAC_PARTITION=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index a1e5a178a4ac..f37a2ab48881 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,5 +1,4 @@ CONFIG_PPC_85xx=y -CONFIG_PHYS_64BIT=y CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -93,15 +92,14 @@ CONFIG_SATA_FSL=y CONFIG_PATA_ALI=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y +CONFIG_FS_ENET=y +CONFIG_UCC_GETH=y +CONFIG_GIANFAR=y CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y CONFIG_FIXED_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_FS_ENET=y -CONFIG_GIANFAR=y -CONFIG_UCC_GETH=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set @@ -120,6 +118,9 @@ CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CPM=m CONFIG_I2C_MPC=y +CONFIG_SPI=y +CONFIG_SPI_FSL_SPI=y +CONFIG_SPI_FSL_ESPI=y CONFIG_GPIO_MPC8XXX=y # CONFIG_HWMON is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -163,6 +164,10 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_RTC_CLASS=y @@ -182,6 +187,7 @@ CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y CONFIG_ADFS_FS=m CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -213,4 +219,5 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_FSL_CAAM=y CONFIG_CRYPTO_DEV_TALITOS=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index dd1e41386c4c..abdcd317cda7 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -1,5 +1,4 @@ CONFIG_PPC_85xx=y -CONFIG_PHYS_64BIT=y CONFIG_SMP=y CONFIG_NR_CPUS=8 CONFIG_EXPERIMENTAL=y @@ -26,6 +25,7 @@ CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y CONFIG_MPC85xx_RDB=y +CONFIG_P1010_RDB=y CONFIG_P1022_DS=y CONFIG_P1023_RDS=y CONFIG_SOCRATES=y @@ -94,15 +94,14 @@ CONFIG_SATA_FSL=y CONFIG_PATA_ALI=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y +CONFIG_FS_ENET=y +CONFIG_UCC_GETH=y +CONFIG_GIANFAR=y CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y CONFIG_FIXED_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_FS_ENET=y -CONFIG_GIANFAR=y -CONFIG_UCC_GETH=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set @@ -121,6 +120,9 @@ CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CPM=m CONFIG_I2C_MPC=y +CONFIG_SPI=y +CONFIG_SPI_FSL_SPI=y +CONFIG_SPI_FSL_ESPI=y CONFIG_GPIO_MPC8XXX=y # CONFIG_HWMON is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -164,6 +166,10 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_RTC_CLASS=y @@ -183,6 +189,7 @@ CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y CONFIG_ADFS_FS=m CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -214,4 +221,5 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_FSL_CAAM=y CONFIG_CRYPTO_DEV_TALITOS=y diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 535711fcb13c..2156e077859b 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -390,6 +390,11 @@ CONFIG_HUGETLBFS=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_ZLIB=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index 185c292b0f1c..ded867871e97 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -6,10 +6,10 @@ CONFIG_NR_CPUS=2 CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_NAMESPACES=y +CONFIG_SPARSE_IRQ=y CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y # CONFIG_PERF_EVENTS is not set # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y @@ -17,6 +17,7 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=m CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +# CONFIG_PPC_POWERNV is not set # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_PMAC is not set CONFIG_PPC_PS3=y @@ -27,14 +28,14 @@ CONFIG_PS3_VRAM=m CONFIG_PS3_LPM=m # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set CONFIG_HIGH_RES_TIMERS=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=y CONFIG_KEXEC=y -CONFIG_SPARSE_IRQ=y # CONFIG_SPARSEMEM_VMEMMAP is not set CONFIG_SCHED_SMT=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" -CONFIG_PM=y +CONFIG_PM_RUNTIME=y CONFIG_PM_DEBUG=y # CONFIG_SECCOMP is not set # CONFIG_PCI is not set @@ -81,20 +82,23 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_MD=y CONFIG_BLK_DEV_DM=m CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set CONFIG_GELIC_NET=y CONFIG_GELIC_WIRELESS=y -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_XILINX is not set CONFIG_USB_USBNET=m # CONFIG_USB_NET_CDCETHER is not set +# CONFIG_USB_NET_CDC_NCM is not set # CONFIG_USB_NET_NET1080 is not set # CONFIG_USB_NET_CDC_SUBSET is not set # CONFIG_USB_NET_ZAURUS is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPPOE=m CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_JOYDEV=m @@ -135,22 +139,21 @@ CONFIG_USB=m CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_SUSPEND=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m -CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_EHCI_HCD_PPC_OF is not set CONFIG_USB_OHCI_HCD=m CONFIG_USB_STORAGE=m CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_PS3=m +CONFIG_RTC_DRV_PS3=y +# CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=m CONFIG_EXT3_FS=m # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT4_FS=y -CONFIG_INOTIFY=y CONFIG_QUOTA=y CONFIG_QFMT_V2=y -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_ISO9660_FS=m CONFIG_JOLIET=y @@ -167,19 +170,17 @@ CONFIG_CIFS=m CONFIG_NLS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y +CONFIG_CRC_CCITT=m CONFIG_CRC_T10DIF=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_PROVE_LOCKING=y CONFIG_DEBUG_LOCKDEP=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_WRITECOUNT=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DEBUG_LIST=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_FTRACE is not set CONFIG_DEBUG_STACKOVERFLOW=y diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index a72f2415a647..30e7d0d20e49 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -304,6 +304,11 @@ CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_ZLIB=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild index d51df17c7e6f..7e313f1ed183 100644 --- a/arch/powerpc/include/asm/Kbuild +++ b/arch/powerpc/include/asm/Kbuild @@ -34,3 +34,5 @@ header-y += termios.h header-y += types.h header-y += ucontext.h header-y += unistd.h + +generic-y += rwsem.h diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index e30442c539ce..ad55a1ccb9fb 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -201,6 +201,7 @@ extern const char *powerpc_base_platform; #define CPU_FTR_POPCNTB LONG_ASM_CONST(0x0400000000000000) #define CPU_FTR_POPCNTD LONG_ASM_CONST(0x0800000000000000) #define CPU_FTR_ICSWX LONG_ASM_CONST(0x1000000000000000) +#define CPU_FTR_VMX_COPY LONG_ASM_CONST(0x2000000000000000) #ifndef __ASSEMBLY__ @@ -425,7 +426,7 @@ extern const char *powerpc_base_platform; CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ CPU_FTR_DSCR | CPU_FTR_SAO | CPU_FTR_ASYM_SMT | \ CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ - CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE) + CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY) #define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ @@ -437,7 +438,7 @@ extern const char *powerpc_base_platform; #define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | CPU_FTR_PPCAS_ARCH_V2) #define CPU_FTRS_A2 (CPU_FTR_USE_TB | CPU_FTR_SMT | CPU_FTR_DBELL | \ - CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN) + CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN | CPU_FTR_ICSWX) #ifdef __powerpc64__ #ifdef CONFIG_PPC_BOOK3E diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h index 1cf20bdfbeca..487d46ff68a1 100644 --- a/arch/powerpc/include/asm/cputime.h +++ b/arch/powerpc/include/asm/cputime.h @@ -29,25 +29,8 @@ static inline void setup_cputime_one_jiffy(void) { } #include <asm/time.h> #include <asm/param.h> -typedef u64 cputime_t; -typedef u64 cputime64_t; - -#define cputime_zero ((cputime_t)0) -#define cputime_max ((~((cputime_t)0) >> 1) - 1) -#define cputime_add(__a, __b) ((__a) + (__b)) -#define cputime_sub(__a, __b) ((__a) - (__b)) -#define cputime_div(__a, __n) ((__a) / (__n)) -#define cputime_halve(__a) ((__a) >> 1) -#define cputime_eq(__a, __b) ((__a) == (__b)) -#define cputime_gt(__a, __b) ((__a) > (__b)) -#define cputime_ge(__a, __b) ((__a) >= (__b)) -#define cputime_lt(__a, __b) ((__a) < (__b)) -#define cputime_le(__a, __b) ((__a) <= (__b)) - -#define cputime64_zero ((cputime64_t)0) -#define cputime64_add(__a, __b) ((__a) + (__b)) -#define cputime64_sub(__a, __b) ((__a) - (__b)) -#define cputime_to_cputime64(__ct) (__ct) +typedef u64 __nocast cputime_t; +typedef u64 __nocast cputime64_t; #ifdef __KERNEL__ @@ -65,7 +48,7 @@ DECLARE_PER_CPU(unsigned long, cputime_scaled_last_delta); static inline unsigned long cputime_to_jiffies(const cputime_t ct) { - return mulhdu(ct, __cputime_jiffies_factor); + return mulhdu((__force u64) ct, __cputime_jiffies_factor); } /* Estimate the scaled cputime by scaling the real cputime based on @@ -74,14 +57,15 @@ static inline cputime_t cputime_to_scaled(const cputime_t ct) { if (cpu_has_feature(CPU_FTR_SPURR) && __get_cpu_var(cputime_last_delta)) - return ct * __get_cpu_var(cputime_scaled_last_delta) / - __get_cpu_var(cputime_last_delta); + return (__force u64) ct * + __get_cpu_var(cputime_scaled_last_delta) / + __get_cpu_var(cputime_last_delta); return ct; } static inline cputime_t jiffies_to_cputime(const unsigned long jif) { - cputime_t ct; + u64 ct; unsigned long sec; /* have to be a little careful about overflow */ @@ -93,7 +77,7 @@ static inline cputime_t jiffies_to_cputime(const unsigned long jif) } if (sec) ct += (cputime_t) sec * tb_ticks_per_sec; - return ct; + return (__force cputime_t) ct; } static inline void setup_cputime_one_jiffy(void) @@ -103,7 +87,7 @@ static inline void setup_cputime_one_jiffy(void) static inline cputime64_t jiffies64_to_cputime64(const u64 jif) { - cputime_t ct; + u64 ct; u64 sec; /* have to be a little careful about overflow */ @@ -114,28 +98,28 @@ static inline cputime64_t jiffies64_to_cputime64(const u64 jif) do_div(ct, HZ); } if (sec) - ct += (cputime_t) sec * tb_ticks_per_sec; - return ct; + ct += (u64) sec * tb_ticks_per_sec; + return (__force cputime64_t) ct; } static inline u64 cputime64_to_jiffies64(const cputime_t ct) { - return mulhdu(ct, __cputime_jiffies_factor); + return mulhdu((__force u64) ct, __cputime_jiffies_factor); } /* * Convert cputime <-> microseconds */ -extern u64 __cputime_msec_factor; +extern u64 __cputime_usec_factor; static inline unsigned long cputime_to_usecs(const cputime_t ct) { - return mulhdu(ct, __cputime_msec_factor) * USEC_PER_MSEC; + return mulhdu((__force u64) ct, __cputime_usec_factor); } static inline cputime_t usecs_to_cputime(const unsigned long us) { - cputime_t ct; + u64 ct; unsigned long sec; /* have to be a little careful about overflow */ @@ -143,13 +127,15 @@ static inline cputime_t usecs_to_cputime(const unsigned long us) sec = us / 1000000; if (ct) { ct *= tb_ticks_per_sec; - do_div(ct, 1000); + do_div(ct, 1000000); } if (sec) ct += (cputime_t) sec * tb_ticks_per_sec; - return ct; + return (__force cputime_t) ct; } +#define usecs_to_cputime64(us) usecs_to_cputime(us) + /* * Convert cputime <-> seconds */ @@ -157,12 +143,12 @@ extern u64 __cputime_sec_factor; static inline unsigned long cputime_to_secs(const cputime_t ct) { - return mulhdu(ct, __cputime_sec_factor); + return mulhdu((__force u64) ct, __cputime_sec_factor); } static inline cputime_t secs_to_cputime(const unsigned long sec) { - return (cputime_t) sec * tb_ticks_per_sec; + return (__force cputime_t)((u64) sec * tb_ticks_per_sec); } /* @@ -170,7 +156,7 @@ static inline cputime_t secs_to_cputime(const unsigned long sec) */ static inline void cputime_to_timespec(const cputime_t ct, struct timespec *p) { - u64 x = ct; + u64 x = (__force u64) ct; unsigned int frac; frac = do_div(x, tb_ticks_per_sec); @@ -182,11 +168,11 @@ static inline void cputime_to_timespec(const cputime_t ct, struct timespec *p) static inline cputime_t timespec_to_cputime(const struct timespec *p) { - cputime_t ct; + u64 ct; ct = (u64) p->tv_nsec * tb_ticks_per_sec; do_div(ct, 1000000000); - return ct + (u64) p->tv_sec * tb_ticks_per_sec; + return (__force cputime_t)(ct + (u64) p->tv_sec * tb_ticks_per_sec); } /* @@ -194,7 +180,7 @@ static inline cputime_t timespec_to_cputime(const struct timespec *p) */ static inline void cputime_to_timeval(const cputime_t ct, struct timeval *p) { - u64 x = ct; + u64 x = (__force u64) ct; unsigned int frac; frac = do_div(x, tb_ticks_per_sec); @@ -206,11 +192,11 @@ static inline void cputime_to_timeval(const cputime_t ct, struct timeval *p) static inline cputime_t timeval_to_cputime(const struct timeval *p) { - cputime_t ct; + u64 ct; ct = (u64) p->tv_usec * tb_ticks_per_sec; do_div(ct, 1000000); - return ct + (u64) p->tv_sec * tb_ticks_per_sec; + return (__force cputime_t)(ct + (u64) p->tv_sec * tb_ticks_per_sec); } /* @@ -220,12 +206,12 @@ extern u64 __cputime_clockt_factor; static inline unsigned long cputime_to_clock_t(const cputime_t ct) { - return mulhdu(ct, __cputime_clockt_factor); + return mulhdu((__force u64) ct, __cputime_clockt_factor); } static inline cputime_t clock_t_to_cputime(const unsigned long clk) { - cputime_t ct; + u64 ct; unsigned long sec; /* have to be a little careful about overflow */ @@ -236,8 +222,8 @@ static inline cputime_t clock_t_to_cputime(const unsigned long clk) do_div(ct, USER_HZ); } if (sec) - ct += (cputime_t) sec * tb_ticks_per_sec; - return ct; + ct += (u64) sec * tb_ticks_per_sec; + return (__force cputime_t) ct; } #define cputime64_to_clock_t(ct) cputime_to_clock_t((cputime_t)(ct)) diff --git a/arch/powerpc/include/asm/fsl_ifc.h b/arch/powerpc/include/asm/fsl_ifc.h new file mode 100644 index 000000000000..b955012939a2 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_ifc.h @@ -0,0 +1,834 @@ +/* Freescale Integrated Flash Controller + * + * Copyright 2011 Freescale Semiconductor, Inc + * + * Author: Dipen Dudhat <dipen.dudhat@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_FSL_IFC_H +#define __ASM_FSL_IFC_H + +#include <linux/compiler.h> +#include <linux/types.h> +#include <linux/io.h> + +#include <linux/of_platform.h> +#include <linux/interrupt.h> + +#define FSL_IFC_BANK_COUNT 4 + +/* + * CSPR - Chip Select Property Register + */ +#define CSPR_BA 0xFFFF0000 +#define CSPR_BA_SHIFT 16 +#define CSPR_PORT_SIZE 0x00000180 +#define CSPR_PORT_SIZE_SHIFT 7 +/* Port Size 8 bit */ +#define CSPR_PORT_SIZE_8 0x00000080 +/* Port Size 16 bit */ +#define CSPR_PORT_SIZE_16 0x00000100 +/* Port Size 32 bit */ +#define CSPR_PORT_SIZE_32 0x00000180 +/* Write Protect */ +#define CSPR_WP 0x00000040 +#define CSPR_WP_SHIFT 6 +/* Machine Select */ +#define CSPR_MSEL 0x00000006 +#define CSPR_MSEL_SHIFT 1 +/* NOR */ +#define CSPR_MSEL_NOR 0x00000000 +/* NAND */ +#define CSPR_MSEL_NAND 0x00000002 +/* GPCM */ +#define CSPR_MSEL_GPCM 0x00000004 +/* Bank Valid */ +#define CSPR_V 0x00000001 +#define CSPR_V_SHIFT 0 + +/* + * Address Mask Register + */ +#define IFC_AMASK_MASK 0xFFFF0000 +#define IFC_AMASK_SHIFT 16 +#define IFC_AMASK(n) (IFC_AMASK_MASK << \ + (__ilog2(n) - IFC_AMASK_SHIFT)) + +/* + * Chip Select Option Register IFC_NAND Machine + */ +/* Enable ECC Encoder */ +#define CSOR_NAND_ECC_ENC_EN 0x80000000 +#define CSOR_NAND_ECC_MODE_MASK 0x30000000 +/* 4 bit correction per 520 Byte sector */ +#define CSOR_NAND_ECC_MODE_4 0x00000000 +/* 8 bit correction per 528 Byte sector */ +#define CSOR_NAND_ECC_MODE_8 0x10000000 +/* Enable ECC Decoder */ +#define CSOR_NAND_ECC_DEC_EN 0x04000000 +/* Row Address Length */ +#define CSOR_NAND_RAL_MASK 0x01800000 +#define CSOR_NAND_RAL_SHIFT 20 +#define CSOR_NAND_RAL_1 0x00000000 +#define CSOR_NAND_RAL_2 0x00800000 +#define CSOR_NAND_RAL_3 0x01000000 +#define CSOR_NAND_RAL_4 0x01800000 +/* Page Size 512b, 2k, 4k */ +#define CSOR_NAND_PGS_MASK 0x00180000 +#define CSOR_NAND_PGS_SHIFT 16 +#define CSOR_NAND_PGS_512 0x00000000 +#define CSOR_NAND_PGS_2K 0x00080000 +#define CSOR_NAND_PGS_4K 0x00100000 +/* Spare region Size */ +#define CSOR_NAND_SPRZ_MASK 0x0000E000 +#define CSOR_NAND_SPRZ_SHIFT 13 +#define CSOR_NAND_SPRZ_16 0x00000000 +#define CSOR_NAND_SPRZ_64 0x00002000 +#define CSOR_NAND_SPRZ_128 0x00004000 +#define CSOR_NAND_SPRZ_210 0x00006000 +#define CSOR_NAND_SPRZ_218 0x00008000 +#define CSOR_NAND_SPRZ_224 0x0000A000 +/* Pages Per Block */ +#define CSOR_NAND_PB_MASK 0x00000700 +#define CSOR_NAND_PB_SHIFT 8 +#define CSOR_NAND_PB(n) ((__ilog2(n) - 5) << CSOR_NAND_PB_SHIFT) +/* Time for Read Enable High to Output High Impedance */ +#define CSOR_NAND_TRHZ_MASK 0x0000001C +#define CSOR_NAND_TRHZ_SHIFT 2 +#define CSOR_NAND_TRHZ_20 0x00000000 +#define CSOR_NAND_TRHZ_40 0x00000004 +#define CSOR_NAND_TRHZ_60 0x00000008 +#define CSOR_NAND_TRHZ_80 0x0000000C +#define CSOR_NAND_TRHZ_100 0x00000010 +/* Buffer control disable */ +#define CSOR_NAND_BCTLD 0x00000001 + +/* + * Chip Select Option Register - NOR Flash Mode + */ +/* Enable Address shift Mode */ +#define CSOR_NOR_ADM_SHFT_MODE_EN 0x80000000 +/* Page Read Enable from NOR device */ +#define CSOR_NOR_PGRD_EN 0x10000000 +/* AVD Toggle Enable during Burst Program */ +#define CSOR_NOR_AVD_TGL_PGM_EN 0x01000000 +/* Address Data Multiplexing Shift */ +#define CSOR_NOR_ADM_MASK 0x0003E000 +#define CSOR_NOR_ADM_SHIFT_SHIFT 13 +#define CSOR_NOR_ADM_SHIFT(n) ((n) << CSOR_NOR_ADM_SHIFT_SHIFT) +/* Type of the NOR device hooked */ +#define CSOR_NOR_NOR_MODE_AYSNC_NOR 0x00000000 +#define CSOR_NOR_NOR_MODE_AVD_NOR 0x00000020 +/* Time for Read Enable High to Output High Impedance */ +#define CSOR_NOR_TRHZ_MASK 0x0000001C +#define CSOR_NOR_TRHZ_SHIFT 2 +#define CSOR_NOR_TRHZ_20 0x00000000 +#define CSOR_NOR_TRHZ_40 0x00000004 +#define CSOR_NOR_TRHZ_60 0x00000008 +#define CSOR_NOR_TRHZ_80 0x0000000C +#define CSOR_NOR_TRHZ_100 0x00000010 +/* Buffer control disable */ +#define CSOR_NOR_BCTLD 0x00000001 + +/* + * Chip Select Option Register - GPCM Mode + */ +/* GPCM Mode - Normal */ +#define CSOR_GPCM_GPMODE_NORMAL 0x00000000 +/* GPCM Mode - GenericASIC */ +#define CSOR_GPCM_GPMODE_ASIC 0x80000000 +/* Parity Mode odd/even */ +#define CSOR_GPCM_PARITY_EVEN 0x40000000 +/* Parity Checking enable/disable */ +#define CSOR_GPCM_PAR_EN 0x20000000 +/* GPCM Timeout Count */ +#define CSOR_GPCM_GPTO_MASK 0x0F000000 +#define CSOR_GPCM_GPTO_SHIFT 24 +#define CSOR_GPCM_GPTO(n) ((__ilog2(n) - 8) << CSOR_GPCM_GPTO_SHIFT) +/* GPCM External Access Termination mode for read access */ +#define CSOR_GPCM_RGETA_EXT 0x00080000 +/* GPCM External Access Termination mode for write access */ +#define CSOR_GPCM_WGETA_EXT 0x00040000 +/* Address Data Multiplexing Shift */ +#define CSOR_GPCM_ADM_MASK 0x0003E000 +#define CSOR_GPCM_ADM_SHIFT_SHIFT 13 +#define CSOR_GPCM_ADM_SHIFT(n) ((n) << CSOR_GPCM_ADM_SHIFT_SHIFT) +/* Generic ASIC Parity error indication delay */ +#define CSOR_GPCM_GAPERRD_MASK 0x00000180 +#define CSOR_GPCM_GAPERRD_SHIFT 7 +#define CSOR_GPCM_GAPERRD(n) (((n) - 1) << CSOR_GPCM_GAPERRD_SHIFT) +/* Time for Read Enable High to Output High Impedance */ +#define CSOR_GPCM_TRHZ_MASK 0x0000001C +#define CSOR_GPCM_TRHZ_20 0x00000000 +#define CSOR_GPCM_TRHZ_40 0x00000004 +#define CSOR_GPCM_TRHZ_60 0x00000008 +#define CSOR_GPCM_TRHZ_80 0x0000000C +#define CSOR_GPCM_TRHZ_100 0x00000010 +/* Buffer control disable */ +#define CSOR_GPCM_BCTLD 0x00000001 + +/* + * Ready Busy Status Register (RB_STAT) + */ +/* CSn is READY */ +#define IFC_RB_STAT_READY_CS0 0x80000000 +#define IFC_RB_STAT_READY_CS1 0x40000000 +#define IFC_RB_STAT_READY_CS2 0x20000000 +#define IFC_RB_STAT_READY_CS3 0x10000000 + +/* + * General Control Register (GCR) + */ +#define IFC_GCR_MASK 0x8000F800 +/* reset all IFC hardware */ +#define IFC_GCR_SOFT_RST_ALL 0x80000000 +/* Turnaroud Time of external buffer */ +#define IFC_GCR_TBCTL_TRN_TIME 0x0000F800 +#define IFC_GCR_TBCTL_TRN_TIME_SHIFT 11 + +/* + * Common Event and Error Status Register (CM_EVTER_STAT) + */ +/* Chip select error */ +#define IFC_CM_EVTER_STAT_CSER 0x80000000 + +/* + * Common Event and Error Enable Register (CM_EVTER_EN) + */ +/* Chip select error checking enable */ +#define IFC_CM_EVTER_EN_CSEREN 0x80000000 + +/* + * Common Event and Error Interrupt Enable Register (CM_EVTER_INTR_EN) + */ +/* Chip select error interrupt enable */ +#define IFC_CM_EVTER_INTR_EN_CSERIREN 0x80000000 + +/* + * Common Transfer Error Attribute Register-0 (CM_ERATTR0) + */ +/* transaction type of error Read/Write */ +#define IFC_CM_ERATTR0_ERTYP_READ 0x80000000 +#define IFC_CM_ERATTR0_ERAID 0x0FF00000 +#define IFC_CM_ERATTR0_ERAID_SHIFT 20 +#define IFC_CM_ERATTR0_ESRCID 0x0000FF00 +#define IFC_CM_ERATTR0_ESRCID_SHIFT 8 + +/* + * Clock Control Register (CCR) + */ +#define IFC_CCR_MASK 0x0F0F8800 +/* Clock division ratio */ +#define IFC_CCR_CLK_DIV_MASK 0x0F000000 +#define IFC_CCR_CLK_DIV_SHIFT 24 +#define IFC_CCR_CLK_DIV(n) ((n-1) << IFC_CCR_CLK_DIV_SHIFT) +/* IFC Clock Delay */ +#define IFC_CCR_CLK_DLY_MASK 0x000F0000 +#define IFC_CCR_CLK_DLY_SHIFT 16 +#define IFC_CCR_CLK_DLY(n) ((n) << IFC_CCR_CLK_DLY_SHIFT) +/* Invert IFC clock before sending out */ +#define IFC_CCR_INV_CLK_EN 0x00008000 +/* Fedback IFC Clock */ +#define IFC_CCR_FB_IFC_CLK_SEL 0x00000800 + +/* + * Clock Status Register (CSR) + */ +/* Clk is stable */ +#define IFC_CSR_CLK_STAT_STABLE 0x80000000 + +/* + * IFC_NAND Machine Specific Registers + */ +/* + * NAND Configuration Register (NCFGR) + */ +/* Auto Boot Mode */ +#define IFC_NAND_NCFGR_BOOT 0x80000000 +/* Addressing Mode-ROW0+n/COL0 */ +#define IFC_NAND_NCFGR_ADDR_MODE_RC0 0x00000000 +/* Addressing Mode-ROW0+n/COL0+n */ +#define IFC_NAND_NCFGR_ADDR_MODE_RC1 0x00400000 +/* Number of loop iterations of FIR sequences for multi page operations */ +#define IFC_NAND_NCFGR_NUM_LOOP_MASK 0x0000F000 +#define IFC_NAND_NCFGR_NUM_LOOP_SHIFT 12 +#define IFC_NAND_NCFGR_NUM_LOOP(n) ((n) << IFC_NAND_NCFGR_NUM_LOOP_SHIFT) +/* Number of wait cycles */ +#define IFC_NAND_NCFGR_NUM_WAIT_MASK 0x000000FF +#define IFC_NAND_NCFGR_NUM_WAIT_SHIFT 0 + +/* + * NAND Flash Command Registers (NAND_FCR0/NAND_FCR1) + */ +/* General purpose FCM flash command bytes CMD0-CMD7 */ +#define IFC_NAND_FCR0_CMD0 0xFF000000 +#define IFC_NAND_FCR0_CMD0_SHIFT 24 +#define IFC_NAND_FCR0_CMD1 0x00FF0000 +#define IFC_NAND_FCR0_CMD1_SHIFT 16 +#define IFC_NAND_FCR0_CMD2 0x0000FF00 +#define IFC_NAND_FCR0_CMD2_SHIFT 8 +#define IFC_NAND_FCR0_CMD3 0x000000FF +#define IFC_NAND_FCR0_CMD3_SHIFT 0 +#define IFC_NAND_FCR1_CMD4 0xFF000000 +#define IFC_NAND_FCR1_CMD4_SHIFT 24 +#define IFC_NAND_FCR1_CMD5 0x00FF0000 +#define IFC_NAND_FCR1_CMD5_SHIFT 16 +#define IFC_NAND_FCR1_CMD6 0x0000FF00 +#define IFC_NAND_FCR1_CMD6_SHIFT 8 +#define IFC_NAND_FCR1_CMD7 0x000000FF +#define IFC_NAND_FCR1_CMD7_SHIFT 0 + +/* + * Flash ROW and COL Address Register (ROWn, COLn) + */ +/* Main/spare region locator */ +#define IFC_NAND_COL_MS 0x80000000 +/* Column Address */ +#define IFC_NAND_COL_CA_MASK 0x00000FFF + +/* + * NAND Flash Byte Count Register (NAND_BC) + */ +/* Byte Count for read/Write */ +#define IFC_NAND_BC 0x000001FF + +/* + * NAND Flash Instruction Registers (NAND_FIR0/NAND_FIR1/NAND_FIR2) + */ +/* NAND Machine specific opcodes OP0-OP14*/ +#define IFC_NAND_FIR0_OP0 0xFC000000 +#define IFC_NAND_FIR0_OP0_SHIFT 26 +#define IFC_NAND_FIR0_OP1 0x03F00000 +#define IFC_NAND_FIR0_OP1_SHIFT 20 +#define IFC_NAND_FIR0_OP2 0x000FC000 +#define IFC_NAND_FIR0_OP2_SHIFT 14 +#define IFC_NAND_FIR0_OP3 0x00003F00 +#define IFC_NAND_FIR0_OP3_SHIFT 8 +#define IFC_NAND_FIR0_OP4 0x000000FC +#define IFC_NAND_FIR0_OP4_SHIFT 2 +#define IFC_NAND_FIR1_OP5 0xFC000000 +#define IFC_NAND_FIR1_OP5_SHIFT 26 +#define IFC_NAND_FIR1_OP6 0x03F00000 +#define IFC_NAND_FIR1_OP6_SHIFT 20 +#define IFC_NAND_FIR1_OP7 0x000FC000 +#define IFC_NAND_FIR1_OP7_SHIFT 14 +#define IFC_NAND_FIR1_OP8 0x00003F00 +#define IFC_NAND_FIR1_OP8_SHIFT 8 +#define IFC_NAND_FIR1_OP9 0x000000FC +#define IFC_NAND_FIR1_OP9_SHIFT 2 +#define IFC_NAND_FIR2_OP10 0xFC000000 +#define IFC_NAND_FIR2_OP10_SHIFT 26 +#define IFC_NAND_FIR2_OP11 0x03F00000 +#define IFC_NAND_FIR2_OP11_SHIFT 20 +#define IFC_NAND_FIR2_OP12 0x000FC000 +#define IFC_NAND_FIR2_OP12_SHIFT 14 +#define IFC_NAND_FIR2_OP13 0x00003F00 +#define IFC_NAND_FIR2_OP13_SHIFT 8 +#define IFC_NAND_FIR2_OP14 0x000000FC +#define IFC_NAND_FIR2_OP14_SHIFT 2 + +/* + * Instruction opcodes to be programmed + * in FIR registers- 6bits + */ +enum ifc_nand_fir_opcodes { + IFC_FIR_OP_NOP, + IFC_FIR_OP_CA0, + IFC_FIR_OP_CA1, + IFC_FIR_OP_CA2, + IFC_FIR_OP_CA3, + IFC_FIR_OP_RA0, + IFC_FIR_OP_RA1, + IFC_FIR_OP_RA2, + IFC_FIR_OP_RA3, + IFC_FIR_OP_CMD0, + IFC_FIR_OP_CMD1, + IFC_FIR_OP_CMD2, + IFC_FIR_OP_CMD3, + IFC_FIR_OP_CMD4, + IFC_FIR_OP_CMD5, + IFC_FIR_OP_CMD6, + IFC_FIR_OP_CMD7, + IFC_FIR_OP_CW0, + IFC_FIR_OP_CW1, + IFC_FIR_OP_CW2, + IFC_FIR_OP_CW3, + IFC_FIR_OP_CW4, + IFC_FIR_OP_CW5, + IFC_FIR_OP_CW6, + IFC_FIR_OP_CW7, + IFC_FIR_OP_WBCD, + IFC_FIR_OP_RBCD, + IFC_FIR_OP_BTRD, + IFC_FIR_OP_RDSTAT, + IFC_FIR_OP_NWAIT, + IFC_FIR_OP_WFR, + IFC_FIR_OP_SBRD, + IFC_FIR_OP_UA, + IFC_FIR_OP_RB, +}; + +/* + * NAND Chip Select Register (NAND_CSEL) + */ +#define IFC_NAND_CSEL 0x0C000000 +#define IFC_NAND_CSEL_SHIFT 26 +#define IFC_NAND_CSEL_CS0 0x00000000 +#define IFC_NAND_CSEL_CS1 0x04000000 +#define IFC_NAND_CSEL_CS2 0x08000000 +#define IFC_NAND_CSEL_CS3 0x0C000000 + +/* + * NAND Operation Sequence Start (NANDSEQ_STRT) + */ +/* NAND Flash Operation Start */ +#define IFC_NAND_SEQ_STRT_FIR_STRT 0x80000000 +/* Automatic Erase */ +#define IFC_NAND_SEQ_STRT_AUTO_ERS 0x00800000 +/* Automatic Program */ +#define IFC_NAND_SEQ_STRT_AUTO_PGM 0x00100000 +/* Automatic Copyback */ +#define IFC_NAND_SEQ_STRT_AUTO_CPB 0x00020000 +/* Automatic Read Operation */ +#define IFC_NAND_SEQ_STRT_AUTO_RD 0x00004000 +/* Automatic Status Read */ +#define IFC_NAND_SEQ_STRT_AUTO_STAT_RD 0x00000800 + +/* + * NAND Event and Error Status Register (NAND_EVTER_STAT) + */ +/* Operation Complete */ +#define IFC_NAND_EVTER_STAT_OPC 0x80000000 +/* Flash Timeout Error */ +#define IFC_NAND_EVTER_STAT_FTOER 0x08000000 +/* Write Protect Error */ +#define IFC_NAND_EVTER_STAT_WPER 0x04000000 +/* ECC Error */ +#define IFC_NAND_EVTER_STAT_ECCER 0x02000000 +/* RCW Load Done */ +#define IFC_NAND_EVTER_STAT_RCW_DN 0x00008000 +/* Boot Loadr Done */ +#define IFC_NAND_EVTER_STAT_BOOT_DN 0x00004000 +/* Bad Block Indicator search select */ +#define IFC_NAND_EVTER_STAT_BBI_SRCH_SE 0x00000800 + +/* + * NAND Flash Page Read Completion Event Status Register + * (PGRDCMPL_EVT_STAT) + */ +#define PGRDCMPL_EVT_STAT_MASK 0xFFFF0000 +/* Small Page 0-15 Done */ +#define PGRDCMPL_EVT_STAT_SECTION_SP(n) (1 << (31 - (n))) +/* Large Page(2K) 0-3 Done */ +#define PGRDCMPL_EVT_STAT_LP_2K(n) (0xF << (28 - (n)*4)) +/* Large Page(4K) 0-1 Done */ +#define PGRDCMPL_EVT_STAT_LP_4K(n) (0xFF << (24 - (n)*8)) + +/* + * NAND Event and Error Enable Register (NAND_EVTER_EN) + */ +/* Operation complete event enable */ +#define IFC_NAND_EVTER_EN_OPC_EN 0x80000000 +/* Page read complete event enable */ +#define IFC_NAND_EVTER_EN_PGRDCMPL_EN 0x20000000 +/* Flash Timeout error enable */ +#define IFC_NAND_EVTER_EN_FTOER_EN 0x08000000 +/* Write Protect error enable */ +#define IFC_NAND_EVTER_EN_WPER_EN 0x04000000 +/* ECC error logging enable */ +#define IFC_NAND_EVTER_EN_ECCER_EN 0x02000000 + +/* + * NAND Event and Error Interrupt Enable Register (NAND_EVTER_INTR_EN) + */ +/* Enable interrupt for operation complete */ +#define IFC_NAND_EVTER_INTR_OPCIR_EN 0x80000000 +/* Enable interrupt for Page read complete */ +#define IFC_NAND_EVTER_INTR_PGRDCMPLIR_EN 0x20000000 +/* Enable interrupt for Flash timeout error */ +#define IFC_NAND_EVTER_INTR_FTOERIR_EN 0x08000000 +/* Enable interrupt for Write protect error */ +#define IFC_NAND_EVTER_INTR_WPERIR_EN 0x04000000 +/* Enable interrupt for ECC error*/ +#define IFC_NAND_EVTER_INTR_ECCERIR_EN 0x02000000 + +/* + * NAND Transfer Error Attribute Register-0 (NAND_ERATTR0) + */ +#define IFC_NAND_ERATTR0_MASK 0x0C080000 +/* Error on CS0-3 for NAND */ +#define IFC_NAND_ERATTR0_ERCS_CS0 0x00000000 +#define IFC_NAND_ERATTR0_ERCS_CS1 0x04000000 +#define IFC_NAND_ERATTR0_ERCS_CS2 0x08000000 +#define IFC_NAND_ERATTR0_ERCS_CS3 0x0C000000 +/* Transaction type of error Read/Write */ +#define IFC_NAND_ERATTR0_ERTTYPE_READ 0x00080000 + +/* + * NAND Flash Status Register (NAND_FSR) + */ +/* First byte of data read from read status op */ +#define IFC_NAND_NFSR_RS0 0xFF000000 +/* Second byte of data read from read status op */ +#define IFC_NAND_NFSR_RS1 0x00FF0000 + +/* + * ECC Error Status Registers (ECCSTAT0-ECCSTAT3) + */ +/* Number of ECC errors on sector n (n = 0-15) */ +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR0_MASK 0x0F000000 +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR0_SHIFT 24 +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR1_MASK 0x000F0000 +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR1_SHIFT 16 +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR2_MASK 0x00000F00 +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR2_SHIFT 8 +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR3_MASK 0x0000000F +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR3_SHIFT 0 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR4_MASK 0x0F000000 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR4_SHIFT 24 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR5_MASK 0x000F0000 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR5_SHIFT 16 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR6_MASK 0x00000F00 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR6_SHIFT 8 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR7_MASK 0x0000000F +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR7_SHIFT 0 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR8_MASK 0x0F000000 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR8_SHIFT 24 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR9_MASK 0x000F0000 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR9_SHIFT 16 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR10_MASK 0x00000F00 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR10_SHIFT 8 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR11_MASK 0x0000000F +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR11_SHIFT 0 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR12_MASK 0x0F000000 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR12_SHIFT 24 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR13_MASK 0x000F0000 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR13_SHIFT 16 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR14_MASK 0x00000F00 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR14_SHIFT 8 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR15_MASK 0x0000000F +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR15_SHIFT 0 + +/* + * NAND Control Register (NANDCR) + */ +#define IFC_NAND_NCR_FTOCNT_MASK 0x1E000000 +#define IFC_NAND_NCR_FTOCNT_SHIFT 25 +#define IFC_NAND_NCR_FTOCNT(n) ((_ilog2(n) - 8) << IFC_NAND_NCR_FTOCNT_SHIFT) + +/* + * NAND_AUTOBOOT_TRGR + */ +/* Trigger RCW load */ +#define IFC_NAND_AUTOBOOT_TRGR_RCW_LD 0x80000000 +/* Trigget Auto Boot */ +#define IFC_NAND_AUTOBOOT_TRGR_BOOT_LD 0x20000000 + +/* + * NAND_MDR + */ +/* 1st read data byte when opcode SBRD */ +#define IFC_NAND_MDR_RDATA0 0xFF000000 +/* 2nd read data byte when opcode SBRD */ +#define IFC_NAND_MDR_RDATA1 0x00FF0000 + +/* + * NOR Machine Specific Registers + */ +/* + * NOR Event and Error Status Register (NOR_EVTER_STAT) + */ +/* NOR Command Sequence Operation Complete */ +#define IFC_NOR_EVTER_STAT_OPC_NOR 0x80000000 +/* Write Protect Error */ +#define IFC_NOR_EVTER_STAT_WPER 0x04000000 +/* Command Sequence Timeout Error */ +#define IFC_NOR_EVTER_STAT_STOER 0x01000000 + +/* + * NOR Event and Error Enable Register (NOR_EVTER_EN) + */ +/* NOR Command Seq complete event enable */ +#define IFC_NOR_EVTER_EN_OPCEN_NOR 0x80000000 +/* Write Protect Error Checking Enable */ +#define IFC_NOR_EVTER_EN_WPEREN 0x04000000 +/* Timeout Error Enable */ +#define IFC_NOR_EVTER_EN_STOEREN 0x01000000 + +/* + * NOR Event and Error Interrupt Enable Register (NOR_EVTER_INTR_EN) + */ +/* Enable interrupt for OPC complete */ +#define IFC_NOR_EVTER_INTR_OPCEN_NOR 0x80000000 +/* Enable interrupt for write protect error */ +#define IFC_NOR_EVTER_INTR_WPEREN 0x04000000 +/* Enable interrupt for timeout error */ +#define IFC_NOR_EVTER_INTR_STOEREN 0x01000000 + +/* + * NOR Transfer Error Attribute Register-0 (NOR_ERATTR0) + */ +/* Source ID for error transaction */ +#define IFC_NOR_ERATTR0_ERSRCID 0xFF000000 +/* AXI ID for error transation */ +#define IFC_NOR_ERATTR0_ERAID 0x000FF000 +/* Chip select corresponds to NOR error */ +#define IFC_NOR_ERATTR0_ERCS_CS0 0x00000000 +#define IFC_NOR_ERATTR0_ERCS_CS1 0x00000010 +#define IFC_NOR_ERATTR0_ERCS_CS2 0x00000020 +#define IFC_NOR_ERATTR0_ERCS_CS3 0x00000030 +/* Type of transaction read/write */ +#define IFC_NOR_ERATTR0_ERTYPE_READ 0x00000001 + +/* + * NOR Transfer Error Attribute Register-2 (NOR_ERATTR2) + */ +#define IFC_NOR_ERATTR2_ER_NUM_PHASE_EXP 0x000F0000 +#define IFC_NOR_ERATTR2_ER_NUM_PHASE_PER 0x00000F00 + +/* + * NOR Control Register (NORCR) + */ +#define IFC_NORCR_MASK 0x0F0F0000 +/* No. of Address/Data Phase */ +#define IFC_NORCR_NUM_PHASE_MASK 0x0F000000 +#define IFC_NORCR_NUM_PHASE_SHIFT 24 +#define IFC_NORCR_NUM_PHASE(n) ((n-1) << IFC_NORCR_NUM_PHASE_SHIFT) +/* Sequence Timeout Count */ +#define IFC_NORCR_STOCNT_MASK 0x000F0000 +#define IFC_NORCR_STOCNT_SHIFT 16 +#define IFC_NORCR_STOCNT(n) ((__ilog2(n) - 8) << IFC_NORCR_STOCNT_SHIFT) + +/* + * GPCM Machine specific registers + */ +/* + * GPCM Event and Error Status Register (GPCM_EVTER_STAT) + */ +/* Timeout error */ +#define IFC_GPCM_EVTER_STAT_TOER 0x04000000 +/* Parity error */ +#define IFC_GPCM_EVTER_STAT_PER 0x01000000 + +/* + * GPCM Event and Error Enable Register (GPCM_EVTER_EN) + */ +/* Timeout error enable */ +#define IFC_GPCM_EVTER_EN_TOER_EN 0x04000000 +/* Parity error enable */ +#define IFC_GPCM_EVTER_EN_PER_EN 0x01000000 + +/* + * GPCM Event and Error Interrupt Enable Register (GPCM_EVTER_INTR_EN) + */ +/* Enable Interrupt for timeout error */ +#define IFC_GPCM_EEIER_TOERIR_EN 0x04000000 +/* Enable Interrupt for Parity error */ +#define IFC_GPCM_EEIER_PERIR_EN 0x01000000 + +/* + * GPCM Transfer Error Attribute Register-0 (GPCM_ERATTR0) + */ +/* Source ID for error transaction */ +#define IFC_GPCM_ERATTR0_ERSRCID 0xFF000000 +/* AXI ID for error transaction */ +#define IFC_GPCM_ERATTR0_ERAID 0x000FF000 +/* Chip select corresponds to GPCM error */ +#define IFC_GPCM_ERATTR0_ERCS_CS0 0x00000000 +#define IFC_GPCM_ERATTR0_ERCS_CS1 0x00000040 +#define IFC_GPCM_ERATTR0_ERCS_CS2 0x00000080 +#define IFC_GPCM_ERATTR0_ERCS_CS3 0x000000C0 +/* Type of transaction read/Write */ +#define IFC_GPCM_ERATTR0_ERTYPE_READ 0x00000001 + +/* + * GPCM Transfer Error Attribute Register-2 (GPCM_ERATTR2) + */ +/* On which beat of address/data parity error is observed */ +#define IFC_GPCM_ERATTR2_PERR_BEAT 0x00000C00 +/* Parity Error on byte */ +#define IFC_GPCM_ERATTR2_PERR_BYTE 0x000000F0 +/* Parity Error reported in addr or data phase */ +#define IFC_GPCM_ERATTR2_PERR_DATA_PHASE 0x00000001 + +/* + * GPCM Status Register (GPCM_STAT) + */ +#define IFC_GPCM_STAT_BSY 0x80000000 /* GPCM is busy */ + +/* + * IFC Controller NAND Machine registers + */ +struct fsl_ifc_nand { + __be32 ncfgr; + u32 res1[0x4]; + __be32 nand_fcr0; + __be32 nand_fcr1; + u32 res2[0x8]; + __be32 row0; + u32 res3; + __be32 col0; + u32 res4; + __be32 row1; + u32 res5; + __be32 col1; + u32 res6; + __be32 row2; + u32 res7; + __be32 col2; + u32 res8; + __be32 row3; + u32 res9; + __be32 col3; + u32 res10[0x24]; + __be32 nand_fbcr; + u32 res11; + __be32 nand_fir0; + __be32 nand_fir1; + __be32 nand_fir2; + u32 res12[0x10]; + __be32 nand_csel; + u32 res13; + __be32 nandseq_strt; + u32 res14; + __be32 nand_evter_stat; + u32 res15; + __be32 pgrdcmpl_evt_stat; + u32 res16[0x2]; + __be32 nand_evter_en; + u32 res17[0x2]; + __be32 nand_evter_intr_en; + u32 res18[0x2]; + __be32 nand_erattr0; + __be32 nand_erattr1; + u32 res19[0x10]; + __be32 nand_fsr; + u32 res20; + __be32 nand_eccstat[4]; + u32 res21[0x20]; + __be32 nanndcr; + u32 res22[0x2]; + __be32 nand_autoboot_trgr; + u32 res23; + __be32 nand_mdr; + u32 res24[0x5C]; +}; + +/* + * IFC controller NOR Machine registers + */ +struct fsl_ifc_nor { + __be32 nor_evter_stat; + u32 res1[0x2]; + __be32 nor_evter_en; + u32 res2[0x2]; + __be32 nor_evter_intr_en; + u32 res3[0x2]; + __be32 nor_erattr0; + __be32 nor_erattr1; + __be32 nor_erattr2; + u32 res4[0x4]; + __be32 norcr; + u32 res5[0xEF]; +}; + +/* + * IFC controller GPCM Machine registers + */ +struct fsl_ifc_gpcm { + __be32 gpcm_evter_stat; + u32 res1[0x2]; + __be32 gpcm_evter_en; + u32 res2[0x2]; + __be32 gpcm_evter_intr_en; + u32 res3[0x2]; + __be32 gpcm_erattr0; + __be32 gpcm_erattr1; + __be32 gpcm_erattr2; + __be32 gpcm_stat; + u32 res4[0x1F3]; +}; + +/* + * IFC Controller Registers + */ +struct fsl_ifc_regs { + __be32 ifc_rev; + u32 res1[0x3]; + struct { + __be32 cspr; + u32 res2[0x2]; + } cspr_cs[FSL_IFC_BANK_COUNT]; + u32 res3[0x18]; + struct { + __be32 amask; + u32 res4[0x2]; + } amask_cs[FSL_IFC_BANK_COUNT]; + u32 res5[0x18]; + struct { + __be32 csor; + u32 res6[0x2]; + } csor_cs[FSL_IFC_BANK_COUNT]; + u32 res7[0x18]; + struct { + __be32 ftim[4]; + u32 res8[0x8]; + } ftim_cs[FSL_IFC_BANK_COUNT]; + u32 res9[0x60]; + __be32 rb_stat; + u32 res10[0x2]; + __be32 ifc_gcr; + u32 res11[0x2]; + __be32 cm_evter_stat; + u32 res12[0x2]; + __be32 cm_evter_en; + u32 res13[0x2]; + __be32 cm_evter_intr_en; + u32 res14[0x2]; + __be32 cm_erattr0; + __be32 cm_erattr1; + u32 res15[0x2]; + __be32 ifc_ccr; + __be32 ifc_csr; + u32 res16[0x2EB]; + struct fsl_ifc_nand ifc_nand; + struct fsl_ifc_nor ifc_nor; + struct fsl_ifc_gpcm ifc_gpcm; +}; + +extern unsigned int convert_ifc_address(phys_addr_t addr_base); +extern int fsl_ifc_find(phys_addr_t addr_base); + +/* overview of the fsl ifc controller */ + +struct fsl_ifc_ctrl { + /* device info */ + struct device *dev; + struct fsl_ifc_regs __iomem *regs; + int irq; + int nand_irq; + spinlock_t lock; + void *nand; + + u32 nand_stat; + wait_queue_head_t nand_wait; +}; + +extern struct fsl_ifc_ctrl *fsl_ifc_ctrl_dev; + + +#endif /* __ASM_FSL_IFC_H */ diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 8a0b5ece8f76..420b45368fcf 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -238,8 +238,6 @@ struct fsl_lbc_regs { #define FPAR_LP_CI_SHIFT 0 __be32 fbcr; /**< Flash Byte Count Register */ #define FBCR_BC 0x00000FFF - u8 res11[0x8]; - u8 res8[0xF00]; }; /* @@ -294,6 +292,11 @@ struct fsl_lbc_ctrl { /* status read from LTESR by irq handler */ unsigned int irq_status; + +#ifdef CONFIG_SUSPEND + /* save regs when system go to deep-sleep */ + struct fsl_lbc_regs *saved_regs; +#endif }; extern int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h index 86004930a78e..dfdb95bc59a5 100644 --- a/arch/powerpc/include/asm/hugetlb.h +++ b/arch/powerpc/include/asm/hugetlb.h @@ -5,7 +5,6 @@ #include <asm/page.h> extern struct kmem_cache *hugepte_cache; -extern void __init reserve_hugetlb_gpages(void); static inline pte_t *hugepd_page(hugepd_t hpd) { @@ -22,14 +21,14 @@ static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr, unsigned pdshift) { /* - * On 32-bit, we have multiple higher-level table entries that point to - * the same hugepte. Just use the first one since they're all + * On FSL BookE, we have multiple higher-level table entries that + * point to the same hugepte. Just use the first one since they're all * identical. So for that case, idx=0. */ unsigned long idx = 0; pte_t *dir = hugepd_page(*hpdp); -#ifdef CONFIG_PPC64 +#ifndef CONFIG_PPC_FSL_BOOK3E idx = (addr & ((1UL << pdshift) - 1)) >> hugepd_shift(*hpdp); #endif @@ -53,7 +52,8 @@ static inline int is_hugepage_only_range(struct mm_struct *mm, } #endif -void book3e_hugetlb_preload(struct mm_struct *mm, unsigned long ea, pte_t pte); +void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea, + pte_t pte); void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr); void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr, @@ -124,7 +124,17 @@ static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep, pte_t pte, int dirty) { +#ifdef HUGETLB_NEED_PRELOAD + /* + * The "return 1" forces a call of update_mmu_cache, which will write a + * TLB entry. Without this, platforms that don't do a write of the TLB + * entry in the TLB miss handler asm will fault ad infinitum. + */ + ptep_set_access_flags(vma, addr, ptep, pte, dirty); + return 1; +#else return ptep_set_access_flags(vma, addr, ptep, pte, dirty); +#endif } static inline pte_t huge_ptep_get(pte_t *ptep) @@ -142,14 +152,24 @@ static inline void arch_release_hugepage(struct page *page) } #else /* ! CONFIG_HUGETLB_PAGE */ -static inline void reserve_hugetlb_gpages(void) -{ - pr_err("Cannot reserve gpages without hugetlb enabled\n"); -} static inline void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr) { } +#endif /* CONFIG_HUGETLB_PAGE */ + + +/* + * FSL Book3E platforms require special gpage handling - the gpages + * are reserved early in the boot process by memblock instead of via + * the .dts as on IBM platforms. + */ +#if defined(CONFIG_HUGETLB_PAGE) && defined(CONFIG_PPC_FSL_BOOK3E) +extern void __init reserve_hugetlb_gpages(void); +#else +static inline void reserve_hugetlb_gpages(void) +{ +} #endif #endif /* _ASM_POWERPC_HUGETLB_H */ diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h index 45698d55cd6a..a3855b81eada 100644 --- a/arch/powerpc/include/asm/io.h +++ b/arch/powerpc/include/asm/io.h @@ -394,7 +394,7 @@ __do_out_asm(_rec_outl, "stwbrx") #endif /* CONFIG_PPC32 */ /* The "__do_*" operations below provide the actual "base" implementation - * for each of the defined acccessor. Some of them use the out_* functions + * for each of the defined accessors. Some of them use the out_* functions * directly, some of them still use EEH, though we might change that in the * future. Those macros below provide the necessary argument swapping and * handling of the IO base for PIO. diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h index bffd062adf79..c9776202d7ec 100644 --- a/arch/powerpc/include/asm/kdump.h +++ b/arch/powerpc/include/asm/kdump.h @@ -32,11 +32,11 @@ #ifndef __ASSEMBLY__ -#if defined(CONFIG_CRASH_DUMP) && !defined(CONFIG_RELOCATABLE) +#if defined(CONFIG_CRASH_DUMP) && !defined(CONFIG_NONSTATIC_KERNEL) extern void reserve_kdump_trampoline(void); extern void setup_kdump_trampoline(void); #else -/* !CRASH_DUMP || RELOCATABLE */ +/* !CRASH_DUMP || !NONSTATIC_KERNEL */ static inline void reserve_kdump_trampoline(void) { ; } static inline void setup_kdump_trampoline(void) { ; } #endif diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h index f921eb121d39..16d7e33d35e9 100644 --- a/arch/powerpc/include/asm/kexec.h +++ b/arch/powerpc/include/asm/kexec.h @@ -49,7 +49,6 @@ #define KEXEC_STATE_REAL_MODE 2 #ifndef __ASSEMBLY__ -#include <linux/cpumask.h> #include <asm/reg.h> typedef void (*crash_shutdown_t)(void); @@ -73,11 +72,6 @@ extern void kexec_smp_wait(void); /* get and clear naca physid, wait for master to copy new code to 0 */ extern int crashing_cpu; extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *)); -extern cpumask_t cpus_in_sr; -static inline int kexec_sr_activated(int cpu) -{ - return cpumask_test_cpu(cpu, &cpus_in_sr); -} struct kimage; struct pt_regs; @@ -94,7 +88,6 @@ extern void reserve_crashkernel(void); extern void machine_kexec_mask_interrupts(void); #else /* !CONFIG_KEXEC */ -static inline int kexec_sr_activated(int cpu) { return 0; } static inline void crash_kexec_secondary(struct pt_regs *regs) { } static inline int overlaps_crashkernel(unsigned long start, unsigned long size) diff --git a/arch/powerpc/include/asm/keylargo.h b/arch/powerpc/include/asm/keylargo.h index d8520ef121f9..fc195d0b3c34 100644 --- a/arch/powerpc/include/asm/keylargo.h +++ b/arch/powerpc/include/asm/keylargo.h @@ -51,7 +51,7 @@ #define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05) -/* Hrm... this one is only to be used on Pismo. It seeem to also +/* Hrm... this one is only to be used on Pismo. It seems to also * control the timebase enable on other machines. Still to be * experimented... --BenH. */ diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h index 0ad432bc81d6..f7727d91ac6b 100644 --- a/arch/powerpc/include/asm/kvm.h +++ b/arch/powerpc/include/asm/kvm.h @@ -170,8 +170,8 @@ struct kvm_sregs { } ppc64; struct { __u32 sr[16]; - __u64 ibat[8]; - __u64 dbat[8]; + __u64 ibat[8]; + __u64 dbat[8]; } ppc32; } s; struct { diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h index d4df013ad779..69c7377d2071 100644 --- a/arch/powerpc/include/asm/kvm_book3s.h +++ b/arch/powerpc/include/asm/kvm_book3s.h @@ -381,39 +381,6 @@ static inline bool kvmppc_critical_section(struct kvm_vcpu *vcpu) } #endif -static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r, - unsigned long pte_index) -{ - unsigned long rb, va_low; - - rb = (v & ~0x7fUL) << 16; /* AVA field */ - va_low = pte_index >> 3; - if (v & HPTE_V_SECONDARY) - va_low = ~va_low; - /* xor vsid from AVA */ - if (!(v & HPTE_V_1TB_SEG)) - va_low ^= v >> 12; - else - va_low ^= v >> 24; - va_low &= 0x7ff; - if (v & HPTE_V_LARGE) { - rb |= 1; /* L field */ - if (cpu_has_feature(CPU_FTR_ARCH_206) && - (r & 0xff000)) { - /* non-16MB large page, must be 64k */ - /* (masks depend on page size) */ - rb |= 0x1000; /* page encoding in LP field */ - rb |= (va_low & 0x7f) << 16; /* 7b of VA in AVA/LP field */ - rb |= (va_low & 0xfe); /* AVAL field (P7 doesn't seem to care) */ - } - } else { - /* 4kB page */ - rb |= (va_low & 0x7ff) << 12; /* remaining 11b of VA */ - } - rb |= (v >> 54) & 0x300; /* B field */ - return rb; -} - /* Magic register values loaded into r3 and r4 before the 'sc' assembly * instruction for the OSI hypercalls */ #define OSI_SC_MAGIC_R3 0x113724FA diff --git a/arch/powerpc/include/asm/kvm_book3s_64.h b/arch/powerpc/include/asm/kvm_book3s_64.h index e43fe42b9875..d0ac94f98f9e 100644 --- a/arch/powerpc/include/asm/kvm_book3s_64.h +++ b/arch/powerpc/include/asm/kvm_book3s_64.h @@ -29,4 +29,37 @@ static inline struct kvmppc_book3s_shadow_vcpu *to_svcpu(struct kvm_vcpu *vcpu) #define SPAPR_TCE_SHIFT 12 +static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r, + unsigned long pte_index) +{ + unsigned long rb, va_low; + + rb = (v & ~0x7fUL) << 16; /* AVA field */ + va_low = pte_index >> 3; + if (v & HPTE_V_SECONDARY) + va_low = ~va_low; + /* xor vsid from AVA */ + if (!(v & HPTE_V_1TB_SEG)) + va_low ^= v >> 12; + else + va_low ^= v >> 24; + va_low &= 0x7ff; + if (v & HPTE_V_LARGE) { + rb |= 1; /* L field */ + if (cpu_has_feature(CPU_FTR_ARCH_206) && + (r & 0xff000)) { + /* non-16MB large page, must be 64k */ + /* (masks depend on page size) */ + rb |= 0x1000; /* page encoding in LP field */ + rb |= (va_low & 0x7f) << 16; /* 7b of VA in AVA/LP field */ + rb |= (va_low & 0xfe); /* AVAL field (P7 doesn't seem to care) */ + } + } else { + /* 4kB page */ + rb |= (va_low & 0x7ff) << 12; /* remaining 11b of VA */ + } + rb |= (v >> 54) & 0x300; /* B field */ + return rb; +} + #endif /* __ASM_KVM_BOOK3S_64_H__ */ diff --git a/arch/powerpc/include/asm/lv1call.h b/arch/powerpc/include/asm/lv1call.h index f77c708c67a0..233f9ecae761 100644 --- a/arch/powerpc/include/asm/lv1call.h +++ b/arch/powerpc/include/asm/lv1call.h @@ -231,7 +231,7 @@ LV1_CALL(allocate_memory, 4, 2, 0 ) LV1_CALL(write_htab_entry, 4, 0, 1 ) LV1_CALL(construct_virtual_address_space, 3, 2, 2 ) LV1_CALL(invalidate_htab_entries, 5, 0, 3 ) -LV1_CALL(get_virtual_address_space_id_of_ppe, 1, 1, 4 ) +LV1_CALL(get_virtual_address_space_id_of_ppe, 0, 1, 4 ) LV1_CALL(query_logical_partition_address_region_info, 1, 5, 6 ) LV1_CALL(select_virtual_address_space, 1, 0, 7 ) LV1_CALL(pause, 1, 0, 9 ) @@ -264,7 +264,7 @@ LV1_CALL(configure_execution_time_variable, 1, 0, 77 ) LV1_CALL(get_spe_irq_outlet, 2, 1, 78 ) LV1_CALL(set_spe_privilege_state_area_1_register, 3, 0, 79 ) LV1_CALL(create_repository_node, 6, 0, 90 ) -LV1_CALL(get_repository_node_value, 5, 2, 91 ) +LV1_CALL(read_repository_node, 5, 2, 91 ) LV1_CALL(modify_repository_node_value, 6, 0, 92 ) LV1_CALL(remove_repository_node, 4, 0, 93 ) LV1_CALL(read_htab_entries, 2, 5, 95 ) @@ -276,7 +276,7 @@ LV1_CALL(construct_io_irq_outlet, 1, 1, 120 ) LV1_CALL(destruct_io_irq_outlet, 1, 0, 121 ) LV1_CALL(map_htab, 1, 1, 122 ) LV1_CALL(unmap_htab, 1, 0, 123 ) -LV1_CALL(get_version_info, 0, 1, 127 ) +LV1_CALL(get_version_info, 0, 2, 127 ) LV1_CALL(insert_htab_entry, 6, 3, 158 ) LV1_CALL(read_virtual_uart, 3, 1, 162 ) LV1_CALL(write_virtual_uart, 3, 1, 163 ) @@ -294,9 +294,9 @@ LV1_CALL(unmap_device_dma_region, 4, 0, 177 ) LV1_CALL(net_add_multicast_address, 4, 0, 185 ) LV1_CALL(net_remove_multicast_address, 4, 0, 186 ) LV1_CALL(net_start_tx_dma, 4, 0, 187 ) -LV1_CALL(net_stop_tx_dma, 3, 0, 188 ) +LV1_CALL(net_stop_tx_dma, 2, 0, 188 ) LV1_CALL(net_start_rx_dma, 4, 0, 189 ) -LV1_CALL(net_stop_rx_dma, 3, 0, 190 ) +LV1_CALL(net_stop_rx_dma, 2, 0, 190 ) LV1_CALL(net_set_interrupt_status_indicator, 4, 0, 191 ) LV1_CALL(net_set_interrupt_mask, 4, 0, 193 ) LV1_CALL(net_control, 6, 2, 194 ) diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index b540d6fcedd6..bf37931d1ad6 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -213,6 +213,9 @@ struct machdep_calls { * allow assignment/enabling of the device. */ int (*pcibios_enable_device_hook)(struct pci_dev *); + /* Called after scan and before resource survey */ + void (*pcibios_fixup_phb)(struct pci_controller *hose); + /* Called to shutdown machine specific hardware not already controlled * by other drivers. */ diff --git a/arch/powerpc/include/asm/memblock.h b/arch/powerpc/include/asm/memblock.h deleted file mode 100644 index 43efc345065e..000000000000 --- a/arch/powerpc/include/asm/memblock.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _ASM_POWERPC_MEMBLOCK_H -#define _ASM_POWERPC_MEMBLOCK_H - -#include <asm/udbg.h> - -#define MEMBLOCK_DBG(fmt...) udbg_printf(fmt) - -#endif /* _ASM_POWERPC_MEMBLOCK_H */ diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h index 0260ea5ec3c2..f5f89cafebd0 100644 --- a/arch/powerpc/include/asm/mmu-book3e.h +++ b/arch/powerpc/include/asm/mmu-book3e.h @@ -214,6 +214,10 @@ typedef struct { unsigned int id; unsigned int active; unsigned long vdso_base; +#ifdef CONFIG_PPC_ICSWX + struct spinlock *cop_lockp; /* guard cop related stuff */ + unsigned long acop; /* mask of enabled coprocessor types */ +#endif /* CONFIG_PPC_ICSWX */ #ifdef CONFIG_PPC_MM_SLICES u64 low_slices_psize; /* SLB page size encodings */ u64 high_slices_psize; /* 4 bits per slice for now */ @@ -254,6 +258,13 @@ extern int mmu_vmemmap_psize; #ifdef CONFIG_PPC64 extern unsigned long linear_map_top; + +/* + * 64-bit booke platforms don't load the tlb in the tlb miss handler code. + * HUGETLB_NEED_PRELOAD handles this - it causes huge_ptep_set_access_flags to + * return 1, indicating that the tlb requires preloading. + */ +#define HUGETLB_NEED_PRELOAD #endif #endif /* !__ASSEMBLY__ */ diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h index db645ec842bd..412ba493cb98 100644 --- a/arch/powerpc/include/asm/mmu-hash64.h +++ b/arch/powerpc/include/asm/mmu-hash64.h @@ -312,10 +312,9 @@ extern void slb_set_size(u16 size); * (i.e. everything above 0xC000000000000000), except the very top * segment, which simplifies several things. * - * - We allow for 15 significant bits of ESID and 20 bits of - * context for user addresses. i.e. 8T (43 bits) of address space for - * up to 1M contexts (although the page table structure and context - * allocation will need changes to take advantage of this). + * - We allow for 16 significant bits of ESID and 19 bits of + * context for user addresses. i.e. 16T (44 bits) of address space for + * up to half a million contexts. * * - The scramble function gives robust scattering in the hash * table (at least based on some initial results). The previous diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h index e6fae49e0b74..67b4d9837236 100644 --- a/arch/powerpc/include/asm/mpic.h +++ b/arch/powerpc/include/asm/mpic.h @@ -251,6 +251,9 @@ struct mpic_irq_save { /* The instance data of a given MPIC */ struct mpic { + /* The OpenFirmware dt node for this MPIC */ + struct device_node *node; + /* The remapper for this MPIC */ struct irq_host *irqhost; @@ -293,6 +296,9 @@ struct mpic /* Register access method */ enum mpic_reg_type reg_type; + /* The physical base address of the MPIC */ + phys_addr_t paddr; + /* The various ioremap'ed bases */ struct mpic_reg_bank gregs; struct mpic_reg_bank tmregs; @@ -331,11 +337,11 @@ struct mpic * Note setting any ID (leaving those bits to 0) means standard MPIC */ -/* This is the primary controller, only that one has IPIs and - * has afinity control. A non-primary MPIC always uses CPU0 - * registers only +/* + * This is a secondary ("chained") controller; it only uses the CPU0 + * registers. Primary controllers have IPIs and affinity control. */ -#define MPIC_PRIMARY 0x00000001 +#define MPIC_SECONDARY 0x00000001 /* Set this for a big-endian MPIC */ #define MPIC_BIG_ENDIAN 0x00000002 diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index 2893e8f5406d..a4b28f165b6c 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -109,6 +109,14 @@ extern int opal_enter_rtas(struct rtas_args *args, #define OPAL_PCI_MAP_PE_DMA_WINDOW 44 #define OPAL_PCI_MAP_PE_DMA_WINDOW_REAL 45 #define OPAL_PCI_RESET 49 +#define OPAL_PCI_GET_HUB_DIAG_DATA 50 +#define OPAL_PCI_GET_PHB_DIAG_DATA 51 +#define OPAL_PCI_FENCE_PHB 52 +#define OPAL_PCI_REINIT 53 +#define OPAL_PCI_MASK_PE_ERROR 54 +#define OPAL_SET_SLOT_LED_STATUS 55 +#define OPAL_GET_EPOW_STATUS 56 +#define OPAL_SET_SYSTEM_ATTENTION_LED 57 #ifndef __ASSEMBLY__ @@ -169,7 +177,11 @@ enum OpalPendingState { OPAL_EVENT_NVRAM = 0x2, OPAL_EVENT_RTC = 0x4, OPAL_EVENT_CONSOLE_OUTPUT = 0x8, - OPAL_EVENT_CONSOLE_INPUT = 0x10 + OPAL_EVENT_CONSOLE_INPUT = 0x10, + OPAL_EVENT_ERROR_LOG_AVAIL = 0x20, + OPAL_EVENT_ERROR_LOG = 0x40, + OPAL_EVENT_EPOW = 0x80, + OPAL_EVENT_LED_STATUS = 0x100 }; /* Machine check related definitions */ @@ -258,13 +270,49 @@ enum OpalPeAction { OPAL_MAP_PE = 1 }; +enum OpalPeltvAction { + OPAL_REMOVE_PE_FROM_DOMAIN = 0, + OPAL_ADD_PE_TO_DOMAIN = 1 +}; + +enum OpalMveEnableAction { + OPAL_DISABLE_MVE = 0, + OPAL_ENABLE_MVE = 1 +}; + enum OpalPciResetAndReinitScope { OPAL_PHB_COMPLETE = 1, OPAL_PCI_LINK = 2, OPAL_PHB_ERROR = 3, OPAL_PCI_HOT_RESET = 4, OPAL_PCI_FUNDAMENTAL_RESET = 5, - OPAL_PCI_IODA_RESET = 6, + OPAL_PCI_IODA_TABLE_RESET = 6, +}; + +enum OpalPciResetState { + OPAL_DEASSERT_RESET = 0, + OPAL_ASSERT_RESET = 1 }; -enum OpalPciResetState { OPAL_DEASSERT_RESET = 0, OPAL_ASSERT_RESET = 1 }; +enum OpalPciMaskAction { + OPAL_UNMASK_ERROR_TYPE = 0, + OPAL_MASK_ERROR_TYPE = 1 +}; + +enum OpalSlotLedType { + OPAL_SLOT_LED_ID_TYPE = 0, + OPAL_SLOT_LED_FAULT_TYPE = 1 +}; + +enum OpalLedAction { + OPAL_TURN_OFF_LED = 0, + OPAL_TURN_ON_LED = 1, + OPAL_QUERY_LED_STATE_AFTER_BUSY = 2 +}; + +enum OpalEpowStatus { + OPAL_EPOW_NONE = 0, + OPAL_EPOW_UPS = 1, + OPAL_EPOW_OVER_AMBIENT_TEMP = 2, + OPAL_EPOW_OVER_INTERNAL_TEMP = 3 +}; struct opal_machine_check_event { enum OpalMCE_Version version:8; /* 0x00 */ @@ -314,8 +362,74 @@ struct opal_machine_check_event { } u; }; +/** + * This structure defines the overlay which will be used to store PHB error + * data upon request. + */ +enum { + OPAL_P7IOC_NUM_PEST_REGS = 128, +}; + +struct OpalIoP7IOCPhbErrorData { + uint32_t brdgCtl; + + // P7IOC utl regs + uint32_t portStatusReg; + uint32_t rootCmplxStatus; + uint32_t busAgentStatus; + + // P7IOC cfg regs + uint32_t deviceStatus; + uint32_t slotStatus; + uint32_t linkStatus; + uint32_t devCmdStatus; + uint32_t devSecStatus; + + // cfg AER regs + uint32_t rootErrorStatus; + uint32_t uncorrErrorStatus; + uint32_t corrErrorStatus; + uint32_t tlpHdr1; + uint32_t tlpHdr2; + uint32_t tlpHdr3; + uint32_t tlpHdr4; + uint32_t sourceId; + + uint32_t rsv3; + + // Record data about the call to allocate a buffer. + uint64_t errorClass; + uint64_t correlator; + + //P7IOC MMIO Error Regs + uint64_t p7iocPlssr; // n120 + uint64_t p7iocCsr; // n110 + uint64_t lemFir; // nC00 + uint64_t lemErrorMask; // nC18 + uint64_t lemWOF; // nC40 + uint64_t phbErrorStatus; // nC80 + uint64_t phbFirstErrorStatus; // nC88 + uint64_t phbErrorLog0; // nCC0 + uint64_t phbErrorLog1; // nCC8 + uint64_t mmioErrorStatus; // nD00 + uint64_t mmioFirstErrorStatus; // nD08 + uint64_t mmioErrorLog0; // nD40 + uint64_t mmioErrorLog1; // nD48 + uint64_t dma0ErrorStatus; // nD80 + uint64_t dma0FirstErrorStatus; // nD88 + uint64_t dma0ErrorLog0; // nDC0 + uint64_t dma0ErrorLog1; // nDC8 + uint64_t dma1ErrorStatus; // nE00 + uint64_t dma1FirstErrorStatus; // nE08 + uint64_t dma1ErrorLog0; // nE40 + uint64_t dma1ErrorLog1; // nE48 + uint64_t pestA[OPAL_P7IOC_NUM_PEST_REGS]; + uint64_t pestB[OPAL_P7IOC_NUM_PEST_REGS]; +}; + typedef struct oppanel_line { - /* XXX */ + const char * line; + uint64_t line_len; } oppanel_line_t; /* API functions */ @@ -413,6 +527,15 @@ int64_t opal_pci_map_pe_dma_window_real(uint64_t phb_id, uint16_t pe_number, uint64_t pci_mem_size); int64_t opal_pci_reset(uint64_t phb_id, uint8_t reset_scope, uint8_t assert_state); +int64_t opal_pci_get_hub_diag_data(uint64_t hub_id, void *diag_buffer, uint64_t diag_buffer_len); +int64_t opal_pci_get_phb_diag_data(uint64_t phb_id, void *diag_buffer, uint64_t diag_buffer_len); +int64_t opal_pci_fence_phb(uint64_t phb_id); +int64_t opal_pci_reinit(uint64_t phb_id, uint8_t reinit_scope); +int64_t opal_pci_mask_pe_error(uint64_t phb_id, uint16_t pe_number, uint8_t error_type, uint8_t mask_action); +int64_t opal_set_slot_led_status(uint64_t phb_id, uint64_t slot_id, uint8_t led_type, uint8_t led_action); +int64_t opal_get_epow_status(uint64_t *status); +int64_t opal_set_system_attention_led(uint8_t led_action); + /* Internal functions */ extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data); diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index 17722c73ba2e..269c05a36d91 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -135,6 +135,7 @@ struct paca_struct { u8 hard_enabled; /* set if irqs are enabled in MSR */ u8 io_sync; /* writel() needs spin_unlock sync */ u8 irq_work_pending; /* IRQ_WORK interrupt while soft-disable */ + u8 nap_state_lost; /* NV GPR values lost in power7_idle */ #ifdef CONFIG_PPC_POWERNV /* Pointer to OPAL machine check event structure set by the diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h index dd9c4fd038e0..f072e974f8a2 100644 --- a/arch/powerpc/include/asm/page.h +++ b/arch/powerpc/include/asm/page.h @@ -92,20 +92,34 @@ extern unsigned int HPAGE_SHIFT; #define PAGE_OFFSET ASM_CONST(CONFIG_PAGE_OFFSET) #define LOAD_OFFSET ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START)) -#if defined(CONFIG_RELOCATABLE) +#if defined(CONFIG_NONSTATIC_KERNEL) #ifndef __ASSEMBLY__ extern phys_addr_t memstart_addr; extern phys_addr_t kernstart_addr; + +#ifdef CONFIG_RELOCATABLE_PPC32 +extern long long virt_phys_offset; #endif + +#endif /* __ASSEMBLY__ */ #define PHYSICAL_START kernstart_addr -#else + +#else /* !CONFIG_NONSTATIC_KERNEL */ #define PHYSICAL_START ASM_CONST(CONFIG_PHYSICAL_START) #endif +/* See Description below for VIRT_PHYS_OFFSET */ +#ifdef CONFIG_RELOCATABLE_PPC32 +#define VIRT_PHYS_OFFSET virt_phys_offset +#else +#define VIRT_PHYS_OFFSET (KERNELBASE - PHYSICAL_START) +#endif + + #ifdef CONFIG_PPC64 #define MEMORY_START 0UL -#elif defined(CONFIG_RELOCATABLE) +#elif defined(CONFIG_NONSTATIC_KERNEL) #define MEMORY_START memstart_addr #else #define MEMORY_START (PHYSICAL_START + PAGE_OFFSET - KERNELBASE) @@ -125,12 +139,77 @@ extern phys_addr_t kernstart_addr; * determine MEMORY_START until then. However we can determine PHYSICAL_START * from information at hand (program counter, TLB lookup). * + * On BookE with RELOCATABLE (RELOCATABLE_PPC32) + * + * With RELOCATABLE_PPC32, we support loading the kernel at any physical + * address without any restriction on the page alignment. + * + * We find the runtime address of _stext and relocate ourselves based on + * the following calculation: + * + * virtual_base = ALIGN_DOWN(KERNELBASE,256M) + + * MODULO(_stext.run,256M) + * and create the following mapping: + * + * ALIGN_DOWN(_stext.run,256M) => ALIGN_DOWN(KERNELBASE,256M) + * + * When we process relocations, we cannot depend on the + * existing equation for the __va()/__pa() translations: + * + * __va(x) = (x) - PHYSICAL_START + KERNELBASE + * + * Where: + * PHYSICAL_START = kernstart_addr = Physical address of _stext + * KERNELBASE = Compiled virtual address of _stext. + * + * This formula holds true iff, kernel load address is TLB page aligned. + * + * In our case, we need to also account for the shift in the kernel Virtual + * address. + * + * E.g., + * + * Let the kernel be loaded at 64MB and KERNELBASE be 0xc0000000 (same as PAGE_OFFSET). + * In this case, we would be mapping 0 to 0xc0000000, and kernstart_addr = 64M + * + * Now __va(1MB) = (0x100000) - (0x4000000) + 0xc0000000 + * = 0xbc100000 , which is wrong. + * + * Rather, it should be : 0xc0000000 + 0x100000 = 0xc0100000 + * according to our mapping. + * + * Hence we use the following formula to get the translations right: + * + * __va(x) = (x) - [ PHYSICAL_START - Effective KERNELBASE ] + * + * Where : + * PHYSICAL_START = dynamic load address.(kernstart_addr variable) + * Effective KERNELBASE = virtual_base = + * = ALIGN_DOWN(KERNELBASE,256M) + + * MODULO(PHYSICAL_START,256M) + * + * To make the cost of __va() / __pa() more light weight, we introduce + * a new variable virt_phys_offset, which will hold : + * + * virt_phys_offset = Effective KERNELBASE - PHYSICAL_START + * = ALIGN_DOWN(KERNELBASE,256M) - + * ALIGN_DOWN(PHYSICALSTART,256M) + * + * Hence : + * + * __va(x) = x - PHYSICAL_START + Effective KERNELBASE + * = x + virt_phys_offset + * + * and + * __pa(x) = x + PHYSICAL_START - Effective KERNELBASE + * = x - virt_phys_offset + * * On non-Book-E PPC64 PAGE_OFFSET and MEMORY_START are constants so use * the other definitions for __va & __pa. */ #ifdef CONFIG_BOOKE -#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) - PHYSICAL_START + KERNELBASE)) -#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE) +#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + VIRT_PHYS_OFFSET)) +#define __pa(x) ((unsigned long)(x) - VIRT_PHYS_OFFSET) #else #define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + PAGE_OFFSET - MEMORY_START)) #define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + MEMORY_START) @@ -290,6 +369,7 @@ extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg); extern void copy_user_page(void *to, void *from, unsigned long vaddr, struct page *p); extern int page_is_ram(unsigned long pfn); +extern int devmem_is_allowed(unsigned long pfn); #ifdef CONFIG_PPC_SMLPAR void arch_free_page(struct page *page, int order); diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h index fb40ede6bc0d..fed85e6290e1 100644 --- a/arch/powerpc/include/asm/page_64.h +++ b/arch/powerpc/include/asm/page_64.h @@ -130,7 +130,9 @@ do { \ #ifdef CONFIG_HUGETLB_PAGE +#ifdef CONFIG_PPC_MM_SLICES #define HAVE_ARCH_HUGETLB_UNMAPPED_AREA +#endif #endif /* !CONFIG_HUGETLB_PAGE */ diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 56b879ab3a40..5d487657322e 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -153,8 +153,8 @@ struct pci_dn { int pci_ext_config_space; /* for pci devices */ -#ifdef CONFIG_EEH struct pci_dev *pcidev; /* back-pointer to the pci device */ +#ifdef CONFIG_EEH int class_code; /* pci device class */ int eeh_mode; /* See eeh.h for possible EEH_MODEs */ int eeh_config_addr; @@ -164,6 +164,10 @@ struct pci_dn { int eeh_false_positives; /* # times this device reported #ff's */ u32 config_space[16]; /* saved PCI config space */ #endif +#define IODA_INVALID_PE (-1) +#ifdef CONFIG_PPC_POWERNV + int pe_number; +#endif }; /* Get the pointer to a device_node's pci_dn */ @@ -222,7 +226,6 @@ extern void pci_process_bridge_OF_ranges(struct pci_controller *hose, /* Allocate & free a PCI host bridge structure */ extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev); extern void pcibios_free_controller(struct pci_controller *phb); -extern void pcibios_setup_phb_resources(struct pci_controller *hose); #ifdef CONFIG_PCI extern int pcibios_vaddr_is_ioport(void __iomem *address); diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h index 49c3de582be0..f54b3d26ce9d 100644 --- a/arch/powerpc/include/asm/pci.h +++ b/arch/powerpc/include/asm/pci.h @@ -46,11 +46,6 @@ struct pci_dev; #define pcibios_assign_all_busses() \ (pci_has_flag(PCI_REASSIGN_ALL_BUS)) -static inline void pcibios_set_master(struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} - static inline void pcibios_penalize_isa_irq(int irq, int active) { /* We don't do dynamic PCI IRQ allocation */ @@ -184,8 +179,6 @@ extern void of_scan_pci_bridge(struct pci_dev *dev); extern void of_scan_bus(struct device_node *node, struct pci_bus *bus); extern void of_rescan_bus(struct device_node *node, struct pci_bus *bus); -extern int pci_read_irq_line(struct pci_dev *dev); - struct file; extern pgprot_t pci_phys_mem_access_prot(struct file *file, unsigned long pfn, diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h index 88b0bd925a8b..2e0e4110f7ae 100644 --- a/arch/powerpc/include/asm/pgtable.h +++ b/arch/powerpc/include/asm/pgtable.h @@ -170,6 +170,9 @@ extern int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long addre #define pgprot_cached_wthru(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \ _PAGE_COHERENT | _PAGE_WRITETHRU)) +#define pgprot_cached_noncoherent(prot) \ + (__pgprot(pgprot_val(prot) & ~_PAGE_CACHE_CTL)) + #define pgprot_writecombine pgprot_noncached_wc struct file; diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index eb11a446720e..b585bff1a022 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -382,6 +382,9 @@ static inline unsigned long get_clean_sp(struct pt_regs *regs, int is_32) } #endif +extern unsigned long cpuidle_disable; +enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF}; + #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ #endif /* _ASM_POWERPC_PROCESSOR_H */ diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 559da199edb5..7fdc2c0b7fa0 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -951,6 +951,7 @@ #define PVR_403GCX 0x00201400 #define PVR_405GP 0x40110000 #define PVR_476 0x11a52000 +#define PVR_476FPE 0x7ff50000 #define PVR_STB03XXX 0x40310000 #define PVR_NP405H 0x41410000 #define PVR_NP405L 0x41610000 diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 03c48e819c8e..500fe1dc43e6 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -187,6 +187,10 @@ #define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */ #endif +#ifdef CONFIG_PPC_ICSWX +#define SPRN_HACOP 0x15F /* Hypervisor Available Coprocessor Register */ +#endif + /* Bit definitions for CCR1. */ #define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */ #define CCR1_TCS 0x00000080 /* Timer Clock Select */ diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h index 41f69ae79d4e..01c143bb77ae 100644 --- a/arch/powerpc/include/asm/rtas.h +++ b/arch/powerpc/include/asm/rtas.h @@ -245,6 +245,12 @@ extern int early_init_dt_scan_rtas(unsigned long node, extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal); +#ifdef CONFIG_PPC_RTAS_DAEMON +extern void rtas_cancel_event_scan(void); +#else +static inline void rtas_cancel_event_scan(void) { } +#endif + /* Error types logged. */ #define ERR_FLAG_ALREADY_LOGGED 0x0 #define ERR_FLAG_BOOT 0x1 /* log was pulled from NVRAM on boot */ @@ -307,5 +313,17 @@ static inline u32 rtas_config_addr(int busno, int devfn, int reg) extern void __cpuinit rtas_give_timebase(void); extern void __cpuinit rtas_take_timebase(void); +#ifdef CONFIG_PPC_RTAS +static inline int page_is_rtas_user_buf(unsigned long pfn) +{ + unsigned long paddr = (pfn << PAGE_SHIFT); + if (paddr >= rtas_rmo_buf && paddr < (rtas_rmo_buf + RTAS_RMOBUF_MAX)) + return 1; + return 0; +} +#else +static inline int page_is_rtas_user_buf(unsigned long pfn) { return 0;} +#endif + #endif /* __KERNEL__ */ #endif /* _POWERPC_RTAS_H */ diff --git a/arch/powerpc/include/asm/rwsem.h b/arch/powerpc/include/asm/rwsem.h deleted file mode 100644 index bb1e2cdeb9bf..000000000000 --- a/arch/powerpc/include/asm/rwsem.h +++ /dev/null @@ -1,132 +0,0 @@ -#ifndef _ASM_POWERPC_RWSEM_H -#define _ASM_POWERPC_RWSEM_H - -#ifndef _LINUX_RWSEM_H -#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead." -#endif - -#ifdef __KERNEL__ - -/* - * R/W semaphores for PPC using the stuff in lib/rwsem.c. - * Adapted largely from include/asm-i386/rwsem.h - * by Paul Mackerras <paulus@samba.org>. - */ - -/* - * the semaphore definition - */ -#ifdef CONFIG_PPC64 -# define RWSEM_ACTIVE_MASK 0xffffffffL -#else -# define RWSEM_ACTIVE_MASK 0x0000ffffL -#endif - -#define RWSEM_UNLOCKED_VALUE 0x00000000L -#define RWSEM_ACTIVE_BIAS 0x00000001L -#define RWSEM_WAITING_BIAS (-RWSEM_ACTIVE_MASK-1) -#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS -#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) - -/* - * lock for reading - */ -static inline void __down_read(struct rw_semaphore *sem) -{ - if (unlikely(atomic_long_inc_return((atomic_long_t *)&sem->count) <= 0)) - rwsem_down_read_failed(sem); -} - -static inline int __down_read_trylock(struct rw_semaphore *sem) -{ - long tmp; - - while ((tmp = sem->count) >= 0) { - if (tmp == cmpxchg(&sem->count, tmp, - tmp + RWSEM_ACTIVE_READ_BIAS)) { - return 1; - } - } - return 0; -} - -/* - * lock for writing - */ -static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) -{ - long tmp; - - tmp = atomic_long_add_return(RWSEM_ACTIVE_WRITE_BIAS, - (atomic_long_t *)&sem->count); - if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS)) - rwsem_down_write_failed(sem); -} - -static inline void __down_write(struct rw_semaphore *sem) -{ - __down_write_nested(sem, 0); -} - -static inline int __down_write_trylock(struct rw_semaphore *sem) -{ - long tmp; - - tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE, - RWSEM_ACTIVE_WRITE_BIAS); - return tmp == RWSEM_UNLOCKED_VALUE; -} - -/* - * unlock after reading - */ -static inline void __up_read(struct rw_semaphore *sem) -{ - long tmp; - - tmp = atomic_long_dec_return((atomic_long_t *)&sem->count); - if (unlikely(tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0)) - rwsem_wake(sem); -} - -/* - * unlock after writing - */ -static inline void __up_write(struct rw_semaphore *sem) -{ - if (unlikely(atomic_long_sub_return(RWSEM_ACTIVE_WRITE_BIAS, - (atomic_long_t *)&sem->count) < 0)) - rwsem_wake(sem); -} - -/* - * implement atomic add functionality - */ -static inline void rwsem_atomic_add(long delta, struct rw_semaphore *sem) -{ - atomic_long_add(delta, (atomic_long_t *)&sem->count); -} - -/* - * downgrade write lock to read lock - */ -static inline void __downgrade_write(struct rw_semaphore *sem) -{ - long tmp; - - tmp = atomic_long_add_return(-RWSEM_WAITING_BIAS, - (atomic_long_t *)&sem->count); - if (tmp < 0) - rwsem_downgrade_wake(sem); -} - -/* - * implement exchange and add functionality - */ -static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem) -{ - return atomic_long_add_return(delta, (atomic_long_t *)&sem->count); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_RWSEM_H */ diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/asm/socket.h index 866f7606da68..2fc2af8fbf59 100644 --- a/arch/powerpc/include/asm/socket.h +++ b/arch/powerpc/include/asm/socket.h @@ -69,4 +69,7 @@ #define SO_RXQ_OVFL 40 +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS + #endif /* _ASM_POWERPC_SOCKET_H */ diff --git a/arch/powerpc/include/asm/spu.h b/arch/powerpc/include/asm/spu.h index 4e360bd4a35a..93f280e23279 100644 --- a/arch/powerpc/include/asm/spu.h +++ b/arch/powerpc/include/asm/spu.h @@ -25,7 +25,7 @@ #ifdef __KERNEL__ #include <linux/workqueue.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/mutex.h> #define LS_SIZE (256 * 1024) @@ -166,7 +166,7 @@ struct spu { /* beat only */ u64 shadow_int_mask_RW[3]; - struct sys_device sysdev; + struct device dev; int has_mem_affinity; struct list_head aff_list; @@ -237,7 +237,7 @@ extern long spu_sys_callback(struct spu_syscall_block *s); struct file; struct spufs_calls { long (*create_thread)(const char __user *name, - unsigned int flags, mode_t mode, + unsigned int flags, umode_t mode, struct file *neighbor); long (*spu_run)(struct file *filp, __u32 __user *unpc, __u32 __user *ustatus); @@ -270,11 +270,11 @@ struct spufs_calls { int register_spu_syscalls(struct spufs_calls *calls); void unregister_spu_syscalls(struct spufs_calls *calls); -int spu_add_sysdev_attr(struct sysdev_attribute *attr); -void spu_remove_sysdev_attr(struct sysdev_attribute *attr); +int spu_add_dev_attr(struct device_attribute *attr); +void spu_remove_dev_attr(struct device_attribute *attr); -int spu_add_sysdev_attr_group(struct attribute_group *attrs); -void spu_remove_sysdev_attr_group(struct attribute_group *attrs); +int spu_add_dev_attr_group(struct attribute_group *attrs); +void spu_remove_dev_attr_group(struct attribute_group *attrs); int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea, unsigned long dsisr, unsigned *flt); diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h index e30a13d1ee76..c377457d1b89 100644 --- a/arch/powerpc/include/asm/system.h +++ b/arch/powerpc/include/asm/system.h @@ -193,8 +193,8 @@ extern void cacheable_memzero(void *p, unsigned int nb); extern void *cacheable_memcpy(void *, const void *, unsigned int); extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long); extern void bad_page_fault(struct pt_regs *, unsigned long, int); -extern int die(const char *, struct pt_regs *, long); extern void _exception(int, struct pt_regs *, int, unsigned long); +extern void die(const char *, struct pt_regs *, long); extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); #ifdef CONFIG_BOOKE_WDT @@ -221,6 +221,15 @@ extern unsigned long klimit; extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask); extern int powersave_nap; /* set if nap mode can be used in idle loop */ +void cpu_idle_wait(void); + +#ifdef CONFIG_PSERIES_IDLE +extern void update_smt_snooze_delay(int snooze); +extern int pseries_notify_cpuidle_add_cpu(int cpu); +#else +static inline void update_smt_snooze_delay(int snooze) {} +static inline int pseries_notify_cpuidle_add_cpu(int cpu) { return 0; } +#endif /* * Atomic exchange diff --git a/arch/powerpc/include/asm/tce.h b/arch/powerpc/include/asm/tce.h index f663634cccc9..743f36b38e5d 100644 --- a/arch/powerpc/include/asm/tce.h +++ b/arch/powerpc/include/asm/tce.h @@ -26,10 +26,14 @@ /* * Tces come in two formats, one for the virtual bus and a different - * format for PCI + * format for PCI. PCI TCEs can have hardware or software maintianed + * coherency. */ -#define TCE_VB 0 -#define TCE_PCI 1 +#define TCE_VB 0 +#define TCE_PCI 1 +#define TCE_PCI_SWINV_CREATE 2 +#define TCE_PCI_SWINV_FREE 4 +#define TCE_PCI_SWINV_PAIR 8 /* TCE page size is 4096 bytes (1 << 12) */ diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h index 836f231ec1f0..964714940961 100644 --- a/arch/powerpc/include/asm/thread_info.h +++ b/arch/powerpc/include/asm/thread_info.h @@ -109,7 +109,6 @@ static inline struct thread_info *current_thread_info(void) #define TIF_RESTOREALL 11 /* Restore all regs (implies NOERROR) */ #define TIF_NOERROR 12 /* Force successful syscall return */ #define TIF_NOTIFY_RESUME 13 /* callback before returning to user */ -#define TIF_FREEZE 14 /* Freezing for suspend */ #define TIF_SYSCALL_TRACEPOINT 15 /* syscall tracepoint instrumentation */ #define TIF_RUNLATCH 16 /* Is the runlatch enabled? */ @@ -127,7 +126,6 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_RESTOREALL (1<<TIF_RESTOREALL) #define _TIF_NOERROR (1<<TIF_NOERROR) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) -#define _TIF_FREEZE (1<<TIF_FREEZE) #define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT) #define _TIF_RUNLATCH (1<<TIF_RUNLATCH) #define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h index fe6f7c2c9c68..7eb10fb96cd0 100644 --- a/arch/powerpc/include/asm/time.h +++ b/arch/powerpc/include/asm/time.h @@ -219,5 +219,7 @@ DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array); extern void secondary_cpu_time_init(void); extern void iSeries_time_init_early(void); +DECLARE_PER_CPU(u64, decrementers_next_tb); + #endif /* __KERNEL__ */ #endif /* __POWERPC_TIME_H */ diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h index 1e104af08483..c97185885c6d 100644 --- a/arch/powerpc/include/asm/topology.h +++ b/arch/powerpc/include/asm/topology.h @@ -3,7 +3,7 @@ #ifdef __KERNEL__ -struct sys_device; +struct device; struct device_node; #ifdef CONFIG_NUMA @@ -86,19 +86,19 @@ extern int __node_distance(int, int); extern void __init dump_numa_cpu_topology(void); -extern int sysfs_add_device_to_node(struct sys_device *dev, int nid); -extern void sysfs_remove_device_from_node(struct sys_device *dev, int nid); +extern int sysfs_add_device_to_node(struct device *dev, int nid); +extern void sysfs_remove_device_from_node(struct device *dev, int nid); #else static inline void dump_numa_cpu_topology(void) {} -static inline int sysfs_add_device_to_node(struct sys_device *dev, int nid) +static inline int sysfs_add_device_to_node(struct device *dev, int nid) { return 0; } -static inline void sysfs_remove_device_from_node(struct sys_device *dev, +static inline void sysfs_remove_device_from_node(struct device *dev, int nid) { } diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h index 8947b9827bc4..0abf7f2c6df9 100644 --- a/arch/powerpc/include/asm/types.h +++ b/arch/powerpc/include/asm/types.h @@ -5,8 +5,11 @@ * This is here because we used to use l64 for 64bit powerpc * and we don't want to impact user mode with our change to ll64 * in the kernel. + * + * However, some user programs are fine with this. They can + * flag __SANE_USERSPACE_TYPES__ to get int-ll64.h here. */ -#if defined(__powerpc64__) && !defined(__KERNEL__) +#if !defined(__SANE_USERSPACE_TYPES__) && defined(__powerpc64__) && !defined(__KERNEL__) # include <asm-generic/int-l64.h> #else # include <asm-generic/int-ll64.h> @@ -27,12 +30,6 @@ * 2 of the License, or (at your option) any later version. */ -#ifdef __powerpc64__ -typedef unsigned int umode_t; -#else -typedef unsigned short umode_t; -#endif - typedef struct { __u32 u[4]; } __attribute__((aligned(16))) __vector128; diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index ce4f7f179117..ee728e433aa2 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -85,6 +85,8 @@ extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o extra-$(CONFIG_8xx) := head_8xx.o extra-y += vmlinux.lds +obj-$(CONFIG_RELOCATABLE_PPC32) += reloc_32.o + obj-$(CONFIG_PPC32) += entry_32.o setup_32.o obj-$(CONFIG_PPC64) += dma-iommu.o iommu.o obj-$(CONFIG_KGDB) += kgdb.o diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 7c5324f1ec9c..04caee7d9bc1 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -208,6 +208,7 @@ int main(void) DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time)); DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time)); DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save)); + DEFINE(PACA_NAPSTATELOST, offsetof(struct paca_struct, nap_state_lost)); #endif /* CONFIG_PPC64 */ /* RTAS */ diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c index a3c684b4c862..92c6b008dd2b 100644 --- a/arch/powerpc/kernel/cacheinfo.c +++ b/arch/powerpc/kernel/cacheinfo.c @@ -451,15 +451,15 @@ out: static struct cache_dir *__cpuinit cacheinfo_create_cache_dir(unsigned int cpu_id) { struct cache_dir *cache_dir; - struct sys_device *sysdev; + struct device *dev; struct kobject *kobj = NULL; - sysdev = get_cpu_sysdev(cpu_id); - WARN_ONCE(!sysdev, "no sysdev for CPU %i\n", cpu_id); - if (!sysdev) + dev = get_cpu_device(cpu_id); + WARN_ONCE(!dev, "no dev for CPU %i\n", cpu_id); + if (!dev) goto err; - kobj = kobject_create_and_add("cache", &sysdev->kobj); + kobj = kobject_create_and_add("cache", &dev->kobj); if (!kobj) goto err; diff --git a/arch/powerpc/kernel/cpu_setup_a2.S b/arch/powerpc/kernel/cpu_setup_a2.S index 7f818feaa7a5..ebc62f42a237 100644 --- a/arch/powerpc/kernel/cpu_setup_a2.S +++ b/arch/powerpc/kernel/cpu_setup_a2.S @@ -41,11 +41,16 @@ _GLOBAL(__setup_cpu_a2) * core local but doing it always won't hurt */ -#ifdef CONFIG_PPC_WSP_COPRO +#ifdef CONFIG_PPC_ICSWX /* Make sure ACOP starts out as zero */ li r3,0 mtspr SPRN_ACOP,r3 + /* Skip the following if we are in Guest mode */ + mfmsr r3 + andis. r0,r3,MSR_GS@h + bne _icswx_skip_guest + /* Enable icswx instruction */ mfspr r3,SPRN_A2_CCR2 ori r3,r3,A2_CCR2_ENABLE_ICSWX @@ -54,7 +59,8 @@ _GLOBAL(__setup_cpu_a2) /* Unmask all CTs in HACOP */ li r3,-1 mtspr SPRN_HACOP,r3 -#endif /* CONFIG_PPC_WSP_COPRO */ +_icswx_skip_guest: +#endif /* CONFIG_PPC_ICSWX */ /* Enable doorbell */ mfspr r3,SPRN_A2_CCR2 diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index edae5bb06f1f..81db9e2a8a20 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1505,6 +1505,19 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_4xx, .platform = "ppc405", }, + { /* APM8018X */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x7ff11432, + .cpu_name = "APM8018X", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, { /* default match */ .pvr_mask = 0x00000000, .pvr_value = 0x00000000, @@ -1830,6 +1843,20 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_47x, .platform = "ppc470", }, + { /* 476fpe */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x7ff50000, + .cpu_name = "476fpe", + .cpu_features = CPU_FTRS_47X | CPU_FTR_476_DD2, + .cpu_user_features = COMMON_USER_BOOKE | + PPC_FEATURE_HAS_FPU, + .mmu_features = MMU_FTR_TYPE_47x | + MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL, + .icache_bsize = 32, + .dcache_bsize = 128, + .machine_check = machine_check_47x, + .platform = "ppc470", + }, { /* 476 iss */ .pvr_mask = 0xffff0000, .pvr_value = 0x00050000, diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index d879809d5c45..28be3452e67a 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -10,85 +10,85 @@ * */ -#undef DEBUG - #include <linux/kernel.h> #include <linux/smp.h> #include <linux/reboot.h> #include <linux/kexec.h> -#include <linux/bootmem.h> #include <linux/export.h> #include <linux/crash_dump.h> #include <linux/delay.h> -#include <linux/elf.h> -#include <linux/elfcore.h> #include <linux/init.h> #include <linux/irq.h> #include <linux/types.h> -#include <linux/memblock.h> #include <asm/processor.h> #include <asm/machdep.h> #include <asm/kexec.h> #include <asm/kdump.h> #include <asm/prom.h> -#include <asm/firmware.h> #include <asm/smp.h> #include <asm/system.h> #include <asm/setjmp.h> -#ifdef DEBUG -#include <asm/udbg.h> -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif +/* + * The primary CPU waits a while for all secondary CPUs to enter. This is to + * avoid sending an IPI if the secondary CPUs are entering + * crash_kexec_secondary on their own (eg via a system reset). + * + * The secondary timeout has to be longer than the primary. Both timeouts are + * in milliseconds. + */ +#define PRIMARY_TIMEOUT 500 +#define SECONDARY_TIMEOUT 1000 -/* This keeps a track of which one is crashing cpu. */ +#define IPI_TIMEOUT 10000 +#define REAL_MODE_TIMEOUT 10000 + +/* This keeps a track of which one is the crashing cpu. */ int crashing_cpu = -1; -static cpumask_t cpus_in_crash = CPU_MASK_NONE; -cpumask_t cpus_in_sr = CPU_MASK_NONE; +static atomic_t cpus_in_crash; +static int time_to_dump; #define CRASH_HANDLER_MAX 3 /* NULL terminated list of shutdown handles */ static crash_shutdown_t crash_shutdown_handles[CRASH_HANDLER_MAX+1]; static DEFINE_SPINLOCK(crash_handlers_lock); +static unsigned long crash_shutdown_buf[JMP_BUF_LEN]; +static int crash_shutdown_cpu = -1; + +static int handle_fault(struct pt_regs *regs) +{ + if (crash_shutdown_cpu == smp_processor_id()) + longjmp(crash_shutdown_buf, 1); + return 0; +} + #ifdef CONFIG_SMP -static atomic_t enter_on_soft_reset = ATOMIC_INIT(0); void crash_ipi_callback(struct pt_regs *regs) { + static cpumask_t cpus_state_saved = CPU_MASK_NONE; + int cpu = smp_processor_id(); if (!cpu_online(cpu)) return; hard_irq_disable(); - if (!cpumask_test_cpu(cpu, &cpus_in_crash)) + if (!cpumask_test_cpu(cpu, &cpus_state_saved)) { crash_save_cpu(regs, cpu); - cpumask_set_cpu(cpu, &cpus_in_crash); - - /* - * Entered via soft-reset - could be the kdump - * process is invoked using soft-reset or user activated - * it if some CPU did not respond to an IPI. - * For soft-reset, the secondary CPU can enter this func - * twice. 1 - using IPI, and 2. soft-reset. - * Tell the kexec CPU that entered via soft-reset and ready - * to go down. - */ - if (cpumask_test_cpu(cpu, &cpus_in_sr)) { - cpumask_clear_cpu(cpu, &cpus_in_sr); - atomic_inc(&enter_on_soft_reset); + cpumask_set_cpu(cpu, &cpus_state_saved); } + atomic_inc(&cpus_in_crash); + smp_mb__after_atomic_inc(); + /* * Starting the kdump boot. * This barrier is needed to make sure that all CPUs are stopped. - * If not, soft-reset will be invoked to bring other CPUs. */ - while (!cpumask_test_cpu(crashing_cpu, &cpus_in_crash)) + while (!time_to_dump) cpu_relax(); if (ppc_md.kexec_cpu_down) @@ -103,106 +103,99 @@ void crash_ipi_callback(struct pt_regs *regs) /* NOTREACHED */ } -/* - * Wait until all CPUs are entered via soft-reset. - */ -static void crash_soft_reset_check(int cpu) -{ - unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */ - - cpumask_clear_cpu(cpu, &cpus_in_sr); - while (atomic_read(&enter_on_soft_reset) != ncpus) - cpu_relax(); -} - - static void crash_kexec_prepare_cpus(int cpu) { unsigned int msecs; - unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */ + int tries = 0; + int (*old_handler)(struct pt_regs *regs); + + printk(KERN_EMERG "Sending IPI to other CPUs\n"); crash_send_ipi(crash_ipi_callback); smp_wmb(); +again: /* * FIXME: Until we will have the way to stop other CPUs reliably, * the crash CPU will send an IPI and wait for other CPUs to * respond. - * Delay of at least 10 seconds. */ - printk(KERN_EMERG "Sending IPI to other cpus...\n"); - msecs = 10000; - while ((cpumask_weight(&cpus_in_crash) < ncpus) && (--msecs > 0)) { - cpu_relax(); + msecs = IPI_TIMEOUT; + while ((atomic_read(&cpus_in_crash) < ncpus) && (--msecs > 0)) mdelay(1); - } /* Would it be better to replace the trap vector here? */ + if (atomic_read(&cpus_in_crash) >= ncpus) { + printk(KERN_EMERG "IPI complete\n"); + return; + } + + printk(KERN_EMERG "ERROR: %d cpu(s) not responding\n", + ncpus - atomic_read(&cpus_in_crash)); + /* - * FIXME: In case if we do not get all CPUs, one possibility: ask the - * user to do soft reset such that we get all. - * Soft-reset will be used until better mechanism is implemented. + * If we have a panic timeout set then we can't wait indefinitely + * for someone to activate system reset. We also give up on the + * second time through if system reset fail to work. */ - if (cpumask_weight(&cpus_in_crash) < ncpus) { - printk(KERN_EMERG "done waiting: %d cpu(s) not responding\n", - ncpus - cpumask_weight(&cpus_in_crash)); - printk(KERN_EMERG "Activate soft-reset to stop other cpu(s)\n"); - cpumask_clear(&cpus_in_sr); - atomic_set(&enter_on_soft_reset, 0); - while (cpumask_weight(&cpus_in_crash) < ncpus) - cpu_relax(); - } + if ((panic_timeout > 0) || (tries > 0)) + return; + /* - * Make sure all CPUs are entered via soft-reset if the kdump is - * invoked using soft-reset. + * A system reset will cause all CPUs to take an 0x100 exception. + * The primary CPU returns here via setjmp, and the secondary + * CPUs reexecute the crash_kexec_secondary path. */ - if (cpumask_test_cpu(cpu, &cpus_in_sr)) - crash_soft_reset_check(cpu); - /* Leave the IPI callback set */ + old_handler = __debugger; + __debugger = handle_fault; + crash_shutdown_cpu = smp_processor_id(); + + if (setjmp(crash_shutdown_buf) == 0) { + printk(KERN_EMERG "Activate system reset (dumprestart) " + "to stop other cpu(s)\n"); + + /* + * A system reset will force all CPUs to execute the + * crash code again. We need to reset cpus_in_crash so we + * wait for everyone to do this. + */ + atomic_set(&cpus_in_crash, 0); + smp_mb(); + + while (atomic_read(&cpus_in_crash) < ncpus) + cpu_relax(); + } + + crash_shutdown_cpu = -1; + __debugger = old_handler; + + tries++; + goto again; } /* - * This function will be called by secondary cpus or by kexec cpu - * if soft-reset is activated to stop some CPUs. + * This function will be called by secondary cpus. */ void crash_kexec_secondary(struct pt_regs *regs) { - int cpu = smp_processor_id(); unsigned long flags; - int msecs = 5; + int msecs = SECONDARY_TIMEOUT; local_irq_save(flags); - /* Wait 5ms if the kexec CPU is not entered yet. */ + + /* Wait for the primary crash CPU to signal its progress */ while (crashing_cpu < 0) { if (--msecs < 0) { - /* - * Either kdump image is not loaded or - * kdump process is not started - Probably xmon - * exited using 'x'(exit and recover) or - * kexec_should_crash() failed for all running tasks. - */ - cpumask_clear_cpu(cpu, &cpus_in_sr); + /* No response, kdump image may not have been loaded */ local_irq_restore(flags); return; } + mdelay(1); - cpu_relax(); - } - if (cpu == crashing_cpu) { - /* - * Panic CPU will enter this func only via soft-reset. - * Wait until all secondary CPUs entered and - * then start kexec boot. - */ - crash_soft_reset_check(cpu); - cpumask_set_cpu(crashing_cpu, &cpus_in_crash); - if (ppc_md.kexec_cpu_down) - ppc_md.kexec_cpu_down(1, 0); - machine_kexec(kexec_crash_image); - /* NOTREACHED */ } + crash_ipi_callback(regs); } @@ -211,7 +204,7 @@ void crash_kexec_secondary(struct pt_regs *regs) static void crash_kexec_prepare_cpus(int cpu) { /* - * move the secondarys to us so that we can copy + * move the secondaries to us so that we can copy * the new kernel 0-0x100 safely * * do this if kexec in setup.c ? @@ -225,7 +218,6 @@ static void crash_kexec_prepare_cpus(int cpu) void crash_kexec_secondary(struct pt_regs *regs) { - cpumask_clear(&cpus_in_sr); } #endif /* CONFIG_SMP */ @@ -236,7 +228,7 @@ static void crash_kexec_wait_realmode(int cpu) unsigned int msecs; int i; - msecs = 10000; + msecs = REAL_MODE_TIMEOUT; for (i=0; i < nr_cpu_ids && msecs > 0; i++) { if (i == cpu) continue; @@ -308,22 +300,11 @@ int crash_shutdown_unregister(crash_shutdown_t handler) } EXPORT_SYMBOL(crash_shutdown_unregister); -static unsigned long crash_shutdown_buf[JMP_BUF_LEN]; -static int crash_shutdown_cpu = -1; - -static int handle_fault(struct pt_regs *regs) -{ - if (crash_shutdown_cpu == smp_processor_id()) - longjmp(crash_shutdown_buf, 1); - return 0; -} - void default_machine_crash_shutdown(struct pt_regs *regs) { unsigned int i; int (*old_handler)(struct pt_regs *regs); - /* * This function is only called after the system * has panicked or is otherwise in a critical state. @@ -341,15 +322,26 @@ void default_machine_crash_shutdown(struct pt_regs *regs) * such that another IPI will not be sent. */ crashing_cpu = smp_processor_id(); - crash_save_cpu(regs, crashing_cpu); + + /* + * If we came in via system reset, wait a while for the secondary + * CPUs to enter. + */ + if (TRAP(regs) == 0x100) + mdelay(PRIMARY_TIMEOUT); + crash_kexec_prepare_cpus(crashing_cpu); - cpumask_set_cpu(crashing_cpu, &cpus_in_crash); + + crash_save_cpu(regs, crashing_cpu); + + time_to_dump = 1; + crash_kexec_wait_realmode(crashing_cpu); machine_kexec_mask_interrupts(); /* - * Call registered shutdown routines savely. Swap out + * Call registered shutdown routines safely. Swap out * __debugger_fault_handler, and replace on exit. */ old_handler = __debugger_fault_handler; diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c index 424afb6b8fba..b3ba5163eae2 100644 --- a/arch/powerpc/kernel/crash_dump.c +++ b/arch/powerpc/kernel/crash_dump.c @@ -28,7 +28,7 @@ #define DBG(fmt...) #endif -#ifndef CONFIG_RELOCATABLE +#ifndef CONFIG_NONSTATIC_KERNEL void __init reserve_kdump_trampoline(void) { memblock_reserve(0, KDUMP_RESERVE_LIMIT); @@ -67,7 +67,7 @@ void __init setup_kdump_trampoline(void) DBG(" <- setup_kdump_trampoline()\n"); } -#endif /* CONFIG_RELOCATABLE */ +#endif /* CONFIG_NONSTATIC_KERNEL */ static int __init parse_savemaxmem(char *p) { diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index cf9c69b9189c..d4be7bb3dbdf 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -65,7 +65,7 @@ BEGIN_FTR_SECTION lbz r0,PACAPROCSTART(r13) cmpwi r0,0x80 bne 1f - li r0,0 + li r0,1 stb r0,PACAPROCSTART(r13) b kvm_start_guest 1: diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index b725dab0f88a..7dd2981bcc50 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -64,6 +64,35 @@ _ENTRY(_start); mr r31,r3 /* save device tree ptr */ li r24,0 /* CPU number */ +#ifdef CONFIG_RELOCATABLE +/* + * Relocate ourselves to the current runtime address. + * This is called only by the Boot CPU. + * "relocate" is called with our current runtime virutal + * address. + * r21 will be loaded with the physical runtime address of _stext + */ + bl 0f /* Get our runtime address */ +0: mflr r21 /* Make it accessible */ + addis r21,r21,(_stext - 0b)@ha + addi r21,r21,(_stext - 0b)@l /* Get our current runtime base */ + + /* + * We have the runtime (virutal) address of our base. + * We calculate our shift of offset from a 256M page. + * We could map the 256M page we belong to at PAGE_OFFSET and + * get going from there. + */ + lis r4,KERNELBASE@h + ori r4,r4,KERNELBASE@l + rlwinm r6,r21,0,4,31 /* r6 = PHYS_START % 256M */ + rlwinm r5,r4,0,4,31 /* r5 = KERNELBASE % 256M */ + subf r3,r5,r6 /* r3 = r6 - r5 */ + add r3,r4,r3 /* Required Virutal Address */ + + bl relocate +#endif + bl init_cpu_state /* @@ -88,6 +117,65 @@ _ENTRY(_start); #ifdef CONFIG_RELOCATABLE /* + * Relocatable kernel support based on processing of dynamic + * relocation entries. + * + * r25 will contain RPN/ERPN for the start address of memory + * r21 will contain the current offset of _stext + */ + lis r3,kernstart_addr@ha + la r3,kernstart_addr@l(r3) + + /* + * Compute the kernstart_addr. + * kernstart_addr => (r6,r8) + * kernstart_addr & ~0xfffffff => (r6,r7) + */ + rlwinm r6,r25,0,28,31 /* ERPN. Bits 32-35 of Address */ + rlwinm r7,r25,0,0,3 /* RPN - assuming 256 MB page size */ + rlwinm r8,r21,0,4,31 /* r8 = (_stext & 0xfffffff) */ + or r8,r7,r8 /* Compute the lower 32bit of kernstart_addr */ + + /* Store kernstart_addr */ + stw r6,0(r3) /* higher 32bit */ + stw r8,4(r3) /* lower 32bit */ + + /* + * Compute the virt_phys_offset : + * virt_phys_offset = stext.run - kernstart_addr + * + * stext.run = (KERNELBASE & ~0xfffffff) + (kernstart_addr & 0xfffffff) + * When we relocate, we have : + * + * (kernstart_addr & 0xfffffff) = (stext.run & 0xfffffff) + * + * hence: + * virt_phys_offset = (KERNELBASE & ~0xfffffff) - (kernstart_addr & ~0xfffffff) + * + */ + + /* KERNELBASE&~0xfffffff => (r4,r5) */ + li r4, 0 /* higer 32bit */ + lis r5,KERNELBASE@h + rlwinm r5,r5,0,0,3 /* Align to 256M, lower 32bit */ + + /* + * 64bit subtraction. + */ + subfc r5,r7,r5 + subfe r4,r6,r4 + + /* Store virt_phys_offset */ + lis r3,virt_phys_offset@ha + la r3,virt_phys_offset@l(r3) + + stw r4,0(r3) + stw r5,4(r3) + +#elif defined(CONFIG_DYNAMIC_MEMSTART) + /* + * Mapping based, page aligned dynamic kernel loading. + * * r25 will contain RPN/ERPN for the start address of memory * * Add the difference between KERNELBASE and PAGE_OFFSET to the @@ -732,6 +820,8 @@ _GLOBAL(init_cpu_state) /* We use the PVR to differenciate 44x cores from 476 */ mfspr r3,SPRN_PVR srwi r3,r3,16 + cmplwi cr0,r3,PVR_476FPE@h + beq head_start_47x cmplwi cr0,r3,PVR_476@h beq head_start_47x cmplwi cr0,r3,PVR_476_ISS@h @@ -800,12 +890,29 @@ skpinv: addi r4,r4,1 /* Increment */ /* * Configure and load pinned entry into TLB slot 63. */ +#ifdef CONFIG_NONSTATIC_KERNEL + /* + * In case of a NONSTATIC_KERNEL we reuse the TLB XLAT + * entries of the initial mapping set by the boot loader. + * The XLAT entry is stored in r25 + */ + + /* Read the XLAT entry for our current mapping */ + tlbre r25,r23,PPC44x_TLB_XLAT + + lis r3,KERNELBASE@h + ori r3,r3,KERNELBASE@l + + /* Use our current RPN entry */ + mr r4,r25 +#else lis r3,PAGE_OFFSET@h ori r3,r3,PAGE_OFFSET@l /* Kernel is at the base of RAM */ li r4, 0 /* Load the kernel physical address */ +#endif /* Load the kernel PID = 0 */ li r0,0 diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 9f5d210ddf3f..d5d78c4ceef6 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -197,7 +197,7 @@ _ENTRY(__early_start) bl early_init -#ifdef CONFIG_RELOCATABLE +#ifdef CONFIG_DYNAMIC_MEMSTART lis r3,kernstart_addr@ha la r3,kernstart_addr@l(r3) #ifdef CONFIG_PHYS_64BIT diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c index 39a2baa6ad58..7c66ce13da89 100644 --- a/arch/powerpc/kernel/idle.c +++ b/arch/powerpc/kernel/idle.c @@ -39,13 +39,23 @@ #define cpu_should_die() 0 #endif +unsigned long cpuidle_disable = IDLE_NO_OVERRIDE; +EXPORT_SYMBOL(cpuidle_disable); + static int __init powersave_off(char *arg) { ppc_md.power_save = NULL; + cpuidle_disable = IDLE_POWERSAVE_OFF; return 0; } __setup("powersave=off", powersave_off); +#if defined(CONFIG_PPC_PSERIES) && defined(CONFIG_TRACEPOINTS) +static const bool idle_uses_rcu = 1; +#else +static const bool idle_uses_rcu; +#endif + /* * The body of the idle task. */ @@ -56,7 +66,10 @@ void cpu_idle(void) set_thread_flag(TIF_POLLING_NRFLAG); while (1) { - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); + if (!idle_uses_rcu) + rcu_idle_enter(); + while (!need_resched() && !cpu_should_die()) { ppc64_runlatch_off(); @@ -93,7 +106,9 @@ void cpu_idle(void) HMT_medium(); ppc64_runlatch_on(); - tick_nohz_restart_sched_tick(); + if (!idle_uses_rcu) + rcu_idle_exit(); + tick_nohz_idle_exit(); preempt_enable_no_resched(); if (cpu_should_die()) cpu_die(); @@ -102,6 +117,29 @@ void cpu_idle(void) } } + +/* + * cpu_idle_wait - Used to ensure that all the CPUs come out of the old + * idle loop and start using the new idle loop. + * Required while changing idle handler on SMP systems. + * Caller must have changed idle handler to the new value before the call. + * This window may be larger on shared systems. + */ +void cpu_idle_wait(void) +{ + int cpu; + smp_mb(); + + /* kick all the CPUs so that they exit out of old idle routine */ + get_online_cpus(); + for_each_online_cpu(cpu) { + if (cpu != smp_processor_id()) + smp_send_reschedule(cpu); + } + put_online_cpus(); +} +EXPORT_SYMBOL_GPL(cpu_idle_wait); + int powersave_nap; #ifdef CONFIG_SYSCTL diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S index 3a70845a51c7..fcdff198da4b 100644 --- a/arch/powerpc/kernel/idle_power7.S +++ b/arch/powerpc/kernel/idle_power7.S @@ -54,6 +54,7 @@ _GLOBAL(power7_idle) li r0,0 stb r0,PACASOFTIRQEN(r13) /* we'll hard-enable shortly */ stb r0,PACAHARDIRQEN(r13) + stb r0,PACA_NAPSTATELOST(r13) /* Continue saving state */ SAVE_GPR(2, r1) @@ -86,6 +87,9 @@ _GLOBAL(power7_wakeup_loss) rfid _GLOBAL(power7_wakeup_noloss) + lbz r0,PACA_NAPSTATELOST(r13) + cmpwi r0,0 + bne .power7_wakeup_loss ld r1,PACAR1(r13) ld r4,_MSR(r1) ld r5,_NIP(r1) diff --git a/arch/powerpc/kernel/iomap.c b/arch/powerpc/kernel/iomap.c index 262791807397..97a3715ac8bd 100644 --- a/arch/powerpc/kernel/iomap.c +++ b/arch/powerpc/kernel/iomap.c @@ -119,24 +119,6 @@ EXPORT_SYMBOL(ioport_map); EXPORT_SYMBOL(ioport_unmap); #ifdef CONFIG_PCI -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (!len) - return NULL; - if (max && len > max) - len = max; - if (flags & IORESOURCE_IO) - return ioport_map(start, len); - if (flags & IORESOURCE_MEM) - return ioremap(start, len); - /* What? */ - return NULL; -} - void pci_iounmap(struct pci_dev *dev, void __iomem *addr) { if (isa_vaddr_is_ioport(addr)) @@ -146,6 +128,5 @@ void pci_iounmap(struct pci_dev *dev, void __iomem *addr) iounmap(addr); } -EXPORT_SYMBOL(pci_iomap); EXPORT_SYMBOL(pci_iounmap); #endif /* CONFIG_PCI */ diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 5c3c46948d94..701d4aceb4f4 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -115,6 +115,15 @@ static inline notrace void set_soft_enabled(unsigned long enable) : : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled))); } +static inline notrace void decrementer_check_overflow(void) +{ + u64 now = get_tb_or_rtc(); + u64 *next_tb = &__get_cpu_var(decrementers_next_tb); + + if (now >= *next_tb) + set_dec(1); +} + notrace void arch_local_irq_restore(unsigned long en) { /* @@ -164,24 +173,21 @@ notrace void arch_local_irq_restore(unsigned long en) */ local_paca->hard_enabled = en; -#ifndef CONFIG_BOOKE - /* On server, re-trigger the decrementer if it went negative since - * some processors only trigger on edge transitions of the sign bit. - * - * BookE has a level sensitive decrementer (latches in TSR) so we - * don't need that + /* + * Trigger the decrementer if we have a pending event. Some processors + * only trigger on edge transitions of the sign bit. We might also + * have disabled interrupts long enough that the decrementer wrapped + * to positive. */ - if ((int)mfspr(SPRN_DEC) < 0) - mtspr(SPRN_DEC, 1); -#endif /* CONFIG_BOOKE */ + decrementer_check_overflow(); /* * Force the delivery of pending soft-disabled interrupts on PS3. * Any HV call will have this side effect. */ if (firmware_has_feature(FW_FEATURE_PS3_LV1)) { - u64 tmp; - lv1_get_version_info(&tmp); + u64 tmp, tmp2; + lv1_get_version_info(&tmp, &tmp2); } __hard_irq_enable(); diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index c7b5afeecaf2..3fea3689527e 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -441,6 +441,9 @@ static void __init fixup_port_irq(int index, return; port->irq = virq; + + if (of_device_is_compatible(np, "fsl,ns16550")) + port->handle_irq = fsl8250_handle_irq; } static void __init fixup_port_pio(int index, diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 84daabe2fcba..578f35f18723 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -783,7 +783,7 @@ static const struct file_operations lparcfg_fops = { static int __init lparcfg_init(void) { struct proc_dir_entry *ent; - mode_t mode = S_IRUSR | S_IRGRP | S_IROTH; + umode_t mode = S_IRUSR | S_IRGRP | S_IROTH; /* Allow writing if we have FW_FEATURE_SPLPAR */ if (firmware_has_feature(FW_FEATURE_SPLPAR) && diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index 9ce1672afb59..c957b1202bdc 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -107,9 +107,6 @@ void __init reserve_crashkernel(void) unsigned long long crash_size, crash_base; int ret; - /* this is necessary because of memblock_phys_mem_size() */ - memblock_analyze(); - /* use common parsing */ ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(), &crash_size, &crash_base); @@ -128,7 +125,7 @@ void __init reserve_crashkernel(void) crash_size = resource_size(&crashk_res); -#ifndef CONFIG_RELOCATABLE +#ifndef CONFIG_NONSTATIC_KERNEL if (crashk_res.start != KDUMP_KERNELBASE) printk("Crash kernel location must be 0x%x\n", KDUMP_KERNELBASE); diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 458ed3bee663..cce98d76e905 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -214,7 +214,7 @@ char __devinit *pcibios_setup(char *str) * If the interrupt is used, then gets the interrupt line from the * openfirmware and sets it in the pci_dev and pci_config line. */ -int pci_read_irq_line(struct pci_dev *pci_dev) +static int pci_read_irq_line(struct pci_dev *pci_dev) { struct of_irq oirq; unsigned int virq; @@ -283,7 +283,6 @@ int pci_read_irq_line(struct pci_dev *pci_dev) return 0; } -EXPORT_SYMBOL(pci_read_irq_line); /* * Platform support for /proc/bus/pci/X/Y mmap()s, @@ -921,18 +920,22 @@ static void __devinit pcibios_fixup_resources(struct pci_dev *dev) struct resource *res = dev->resource + i; if (!res->flags) continue; - /* On platforms that have PCI_PROBE_ONLY set, we don't - * consider 0 as an unassigned BAR value. It's technically - * a valid value, but linux doesn't like it... so when we can - * re-assign things, we do so, but if we can't, we keep it - * around and hope for the best... + + /* If we're going to re-assign everything, we mark all resources + * as unset (and 0-base them). In addition, we mark BARs starting + * at 0 as unset as well, except if PCI_PROBE_ONLY is also set + * since in that case, we don't want to re-assign anything */ - if (res->start == 0 && !pci_has_flag(PCI_PROBE_ONLY)) { - pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] is unassigned\n", - pci_name(dev), i, - (unsigned long long)res->start, - (unsigned long long)res->end, - (unsigned int)res->flags); + if (pci_has_flag(PCI_REASSIGN_ALL_RSRC) || + (res->start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) { + /* Only print message if not re-assigning */ + if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC)) + pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] " + "is unassigned\n", + pci_name(dev), i, + (unsigned long long)res->start, + (unsigned long long)res->end, + (unsigned int)res->flags); res->end -= res->start; res->start = 0; res->flags |= IORESOURCE_UNSET; @@ -1042,6 +1045,16 @@ static void __devinit pcibios_fixup_bridge(struct pci_bus *bus) if (i >= 3 && bus->self->transparent) continue; + /* If we are going to re-assign everything, mark the resource + * as unset and move it down to 0 + */ + if (pci_has_flag(PCI_REASSIGN_ALL_RSRC)) { + res->flags |= IORESOURCE_UNSET; + res->end -= res->start; + res->start = 0; + continue; + } + pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n", pci_name(dev), i, (unsigned long long)res->start,\ @@ -1118,6 +1131,11 @@ void __devinit pcibios_setup_bus_devices(struct pci_bus *bus) } } +void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} + void __devinit pcibios_fixup_bus(struct pci_bus *bus) { /* When called from the generic PCI probe, read PCI<->PCI bridge @@ -1262,18 +1280,15 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus) pci_bus_for_each_resource(bus, res, i) { if (!res || !res->flags || res->start > res->end || res->parent) continue; + + /* If the resource was left unset at this point, we clear it */ + if (res->flags & IORESOURCE_UNSET) + goto clear_resource; + if (bus->parent == NULL) pr = (res->flags & IORESOURCE_IO) ? &ioport_resource : &iomem_resource; else { - /* Don't bother with non-root busses when - * re-assigning all resources. We clear the - * resource flags as if they were colliding - * and as such ensure proper re-allocation - * later. - */ - if (pci_has_flag(PCI_REASSIGN_ALL_RSRC)) - goto clear_resource; pr = pci_find_parent_resource(bus->self, res); if (pr == res) { /* this happens when the generic PCI @@ -1304,9 +1319,9 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus) if (reparent_resources(pr, res) == 0) continue; } - printk(KERN_WARNING "PCI: Cannot allocate resource region " - "%d of PCI bridge %d, will remap\n", i, bus->number); -clear_resource: + pr_warning("PCI: Cannot allocate resource region " + "%d of PCI bridge %d, will remap\n", i, bus->number); + clear_resource: res->start = res->end = 0; res->flags = 0; } @@ -1451,16 +1466,11 @@ void __init pcibios_resource_survey(void) { struct pci_bus *b; - /* Allocate and assign resources. If we re-assign everything, then - * we skip the allocate phase - */ + /* Allocate and assign resources */ list_for_each_entry(b, &pci_root_buses, node) pcibios_allocate_bus_resources(b); - - if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC)) { - pcibios_allocate_resources(0); - pcibios_allocate_resources(1); - } + pcibios_allocate_resources(0); + pcibios_allocate_resources(1); /* Before we start assigning unassigned resource, we try to reserve * the low IO area and the VGA memory area if they intersect the @@ -1555,14 +1565,13 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) return pci_enable_resources(dev, mask); } -void __devinit pcibios_setup_phb_resources(struct pci_controller *hose) +static void __devinit pcibios_setup_phb_resources(struct pci_controller *hose, struct list_head *resources) { - struct pci_bus *bus = hose->bus; struct resource *res; int i; /* Hookup PHB IO resource */ - bus->resource[0] = res = &hose->io_resource; + res = &hose->io_resource; if (!res->flags) { printk(KERN_WARNING "PCI: I/O resource not set for host" @@ -1580,6 +1589,7 @@ void __devinit pcibios_setup_phb_resources(struct pci_controller *hose) (unsigned long long)res->start, (unsigned long long)res->end, (unsigned long)res->flags); + pci_add_resource(resources, res); /* Hookup PHB Memory resources */ for (i = 0; i < 3; ++i) { @@ -1597,12 +1607,12 @@ void __devinit pcibios_setup_phb_resources(struct pci_controller *hose) res->flags = IORESOURCE_MEM; #endif /* CONFIG_PPC32 */ } - bus->resource[i+1] = res; pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n", i, (unsigned long long)res->start, (unsigned long long)res->end, (unsigned long)res->flags); + pci_add_resource(resources, res); } pr_debug("PCI: PHB MEM offset = %016llx\n", @@ -1696,6 +1706,7 @@ struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus) */ void __devinit pcibios_scan_phb(struct pci_controller *hose) { + LIST_HEAD(resources); struct pci_bus *bus; struct device_node *node = hose->dn; int mode; @@ -1703,22 +1714,24 @@ void __devinit pcibios_scan_phb(struct pci_controller *hose) pr_debug("PCI: Scanning PHB %s\n", node ? node->full_name : "<NO NAME>"); + /* Get some IO space for the new PHB */ + pcibios_setup_phb_io_space(hose); + + /* Wire up PHB bus resources */ + pcibios_setup_phb_resources(hose, &resources); + /* Create an empty bus for the toplevel */ - bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose); + bus = pci_create_root_bus(hose->parent, hose->first_busno, + hose->ops, hose, &resources); if (bus == NULL) { pr_err("Failed to create bus for PCI domain %04x\n", hose->global_number); + pci_free_resource_list(&resources); return; } bus->secondary = hose->first_busno; hose->bus = bus; - /* Get some IO space for the new PHB */ - pcibios_setup_phb_io_space(hose); - - /* Wire up PHB bus resources */ - pcibios_setup_phb_resources(hose); - /* Get probe mode and perform scan */ mode = PCI_PROBE_NORMAL; if (node && ppc_md.pci_probe_mode) @@ -1732,6 +1745,12 @@ void __devinit pcibios_scan_phb(struct pci_controller *hose) if (mode == PCI_PROBE_NORMAL) hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); + /* Platform gets a chance to do some global fixups before + * we proceed to resource allocation + */ + if (ppc_md.pcibios_fixup_phb) + ppc_md.pcibios_fixup_phb(hose); + /* Configure PCI Express settings */ if (bus && !pci_has_flag(PCI_PROBE_ONLY)) { struct pci_bus *child; @@ -1747,10 +1766,13 @@ void __devinit pcibios_scan_phb(struct pci_controller *hose) static void fixup_hide_host_resource_fsl(struct pci_dev *dev) { int i, class = dev->class >> 8; + /* When configured as agent, programing interface = 1 */ + int prog_if = dev->class & 0xf; if ((class == PCI_CLASS_PROCESSOR_POWERPC || class == PCI_CLASS_BRIDGE_OTHER) && (dev->hdr_type == PCI_HEADER_TYPE_NORMAL) && + (prog_if == 0) && (dev->bus->parent == NULL)) { for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { dev->resource[i].start = 0; diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index bcf4bf9e72d9..3318d39b7d4c 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -131,30 +131,13 @@ EXPORT_SYMBOL_GPL(pcibios_unmap_io_space); #endif /* CONFIG_HOTPLUG */ -int __devinit pcibios_map_io_space(struct pci_bus *bus) +static int __devinit pcibios_map_phb_io_space(struct pci_controller *hose) { struct vm_struct *area; unsigned long phys_page; unsigned long size_page; unsigned long io_virt_offset; - struct pci_controller *hose; - - WARN_ON(bus == NULL); - - /* If this not a PHB, nothing to do, page tables still exist and - * thus HPTEs will be faulted in when needed - */ - if (bus->self) { - pr_debug("IO mapping for PCI-PCI bridge %s\n", - pci_name(bus->self)); - pr_debug(" virt=0x%016llx...0x%016llx\n", - bus->resource[0]->start + _IO_BASE, - bus->resource[0]->end + _IO_BASE); - return 0; - } - /* Get the host bridge */ - hose = pci_bus_to_host(bus); phys_page = _ALIGN_DOWN(hose->io_base_phys, PAGE_SIZE); size_page = _ALIGN_UP(hose->pci_io_size, PAGE_SIZE); @@ -198,11 +181,30 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus) return 0; } + +int __devinit pcibios_map_io_space(struct pci_bus *bus) +{ + WARN_ON(bus == NULL); + + /* If this not a PHB, nothing to do, page tables still exist and + * thus HPTEs will be faulted in when needed + */ + if (bus->self) { + pr_debug("IO mapping for PCI-PCI bridge %s\n", + pci_name(bus->self)); + pr_debug(" virt=0x%016llx...0x%016llx\n", + bus->resource[0]->start + _IO_BASE, + bus->resource[0]->end + _IO_BASE); + return 0; + } + + return pcibios_map_phb_io_space(pci_bus_to_host(bus)); +} EXPORT_SYMBOL_GPL(pcibios_map_io_space); void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose) { - pcibios_map_io_space(hose->bus); + pcibios_map_phb_io_space(hose); } #define IOBASE_BRIDGE_NUMBER 0 diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c index 4e69deb89b37..dd9e4a04bf79 100644 --- a/arch/powerpc/kernel/pci_dn.c +++ b/arch/powerpc/kernel/pci_dn.c @@ -50,6 +50,9 @@ void * __devinit update_dn_pci_info(struct device_node *dn, void *data) dn->data = pdn; pdn->node = dn; pdn->phb = phb; +#ifdef CONFIG_PPC_POWERNV + pdn->pe_number = IODA_INVALID_PE; +#endif regs = of_get_property(dn, "reg", NULL); if (regs) { /* First register entry is addr (00BBSS00) */ diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 6457574c0b2f..ebe5766781aa 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -584,16 +584,32 @@ static struct regbit { unsigned long bit; const char *name; } msr_bits[] = { +#if defined(CONFIG_PPC64) && !defined(CONFIG_BOOKE) + {MSR_SF, "SF"}, + {MSR_HV, "HV"}, +#endif + {MSR_VEC, "VEC"}, + {MSR_VSX, "VSX"}, +#ifdef CONFIG_BOOKE + {MSR_CE, "CE"}, +#endif {MSR_EE, "EE"}, {MSR_PR, "PR"}, {MSR_FP, "FP"}, - {MSR_VEC, "VEC"}, - {MSR_VSX, "VSX"}, {MSR_ME, "ME"}, - {MSR_CE, "CE"}, +#ifdef CONFIG_BOOKE {MSR_DE, "DE"}, +#else + {MSR_SE, "SE"}, + {MSR_BE, "BE"}, +#endif {MSR_IR, "IR"}, {MSR_DR, "DR"}, + {MSR_PMM, "PMM"}, +#ifndef CONFIG_BOOKE + {MSR_RI, "RI"}, + {MSR_LE, "LE"}, +#endif {0, NULL} }; diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index fa1235b0503b..abe405dab34d 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -733,8 +733,6 @@ void __init early_init_devtree(void *params) of_scan_flat_dt(early_init_dt_scan_chosen_ppc, cmd_line); /* Scan memory nodes and rebuild MEMBLOCKs */ - memblock_init(); - of_scan_flat_dt(early_init_dt_scan_root, NULL); of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL); @@ -756,20 +754,14 @@ void __init early_init_devtree(void *params) early_reserve_mem(); phyp_dump_reserve_mem(); - limit = memory_limit; - if (! limit) { - phys_addr_t memsize; - - /* Ensure that total memory size is page-aligned, because - * otherwise mark_bootmem() gets upset. */ - memblock_analyze(); - memsize = memblock_phys_mem_size(); - if ((memsize & PAGE_MASK) != memsize) - limit = memsize & PAGE_MASK; - } + /* + * Ensure that total memory size is page-aligned, because otherwise + * mark_bootmem() gets upset. + */ + limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE); memblock_enforce_memory_limit(limit); - memblock_analyze(); + memblock_allow_resize(); memblock_dump_all(); DBG("Phys. mem: %llx\n", memblock_phys_mem_size()); diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index cc584865b3df..eca626ea3f23 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -742,7 +742,7 @@ static unsigned char ibm_architecture_vec[] = { W(0xffffffff), /* virt_base */ W(0xffffffff), /* virt_size */ W(0xffffffff), /* load_base */ - W(64), /* 64MB min RMA */ + W(256), /* 256MB min RMA */ W(0xffffffff), /* full client load */ 0, /* min RMA percentage of total RAM */ 48, /* max log_2(hash table size) */ @@ -1224,14 +1224,6 @@ static void __init prom_init_mem(void) RELOC(alloc_bottom) = PAGE_ALIGN((unsigned long)&RELOC(_end) + 0x4000); - /* Check if we have an initrd after the kernel, if we do move our bottom - * point to after it - */ - if (RELOC(prom_initrd_start)) { - if (RELOC(prom_initrd_end) > RELOC(alloc_bottom)) - RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end)); - } - /* * If prom_memory_limit is set we reduce the upper limits *except* for * alloc_top_high. This must be the real top of RAM so we can put @@ -1269,6 +1261,15 @@ static void __init prom_init_mem(void) RELOC(alloc_top) = RELOC(rmo_top); RELOC(alloc_top_high) = RELOC(ram_top); + /* + * Check if we have an initrd after the kernel but still inside + * the RMO. If we do move our bottom point to after it. + */ + if (RELOC(prom_initrd_start) && + RELOC(prom_initrd_start) < RELOC(rmo_top) && + RELOC(prom_initrd_end) > RELOC(alloc_bottom)) + RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end)); + prom_printf("memory layout at init:\n"); prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit)); prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom)); @@ -2079,7 +2080,7 @@ static void __init prom_check_displays(void) /* Setup a usable color table when the appropriate * method is available. Should update this to set-colors */ clut = RELOC(default_colors); - for (i = 0; i < 32; i++, clut += 3) + for (i = 0; i < 16; i++, clut += 3) if (prom_set_color(ih, i, clut[0], clut[1], clut[2]) != 0) break; @@ -2844,7 +2845,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, RELOC(of_platform) = prom_find_machine_type(); prom_printf("Detected machine type: %x\n", RELOC(of_platform)); -#ifndef CONFIG_RELOCATABLE +#ifndef CONFIG_NONSTATIC_KERNEL /* Bail if this is a kdump kernel. */ if (PHYSICAL_START > 0) prom_panic("Error: You can't boot a kdump kernel from OF!\n"); @@ -2969,9 +2970,11 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, /* * in case stdin is USB and still active on IBM machines... * Unfortunately quiesce crashes on some powermacs if we have - * closed stdin already (in particular the powerbook 101). + * closed stdin already (in particular the powerbook 101). It + * appears that the OPAL version of OFW doesn't like it either. */ - if (RELOC(of_platform) != PLATFORM_POWERMAC) + if (RELOC(of_platform) != PLATFORM_POWERMAC && + RELOC(of_platform) != PLATFORM_OPAL) prom_close_stdin(); /* @@ -2987,8 +2990,12 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, * is common to us and kexec */ hdr = RELOC(dt_header_start); - prom_printf("returning from prom_init\n"); - prom_debug("->dt_header_start=0x%x\n", hdr); + + /* Don't print anything after quiesce under OPAL, it crashes OFW */ + if (RELOC(of_platform) != PLATFORM_OPAL) { + prom_printf("returning from prom_init\n"); + prom_debug("->dt_header_start=0x%x\n", hdr); + } #ifdef CONFIG_PPC32 reloc_got2(-offset); diff --git a/arch/powerpc/kernel/reloc_32.S b/arch/powerpc/kernel/reloc_32.S new file mode 100644 index 000000000000..ef46ba6e094f --- /dev/null +++ b/arch/powerpc/kernel/reloc_32.S @@ -0,0 +1,208 @@ +/* + * Code to process dynamic relocations for PPC32. + * + * Copyrights (C) IBM Corporation, 2011. + * Author: Suzuki Poulose <suzuki@in.ibm.com> + * + * - Based on ppc64 code - reloc_64.S + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/ppc_asm.h> + +/* Dynamic section table entry tags */ +DT_RELA = 7 /* Tag for Elf32_Rela section */ +DT_RELASZ = 8 /* Size of the Rela relocs */ +DT_RELAENT = 9 /* Size of one Rela reloc entry */ + +STN_UNDEF = 0 /* Undefined symbol index */ +STB_LOCAL = 0 /* Local binding for the symbol */ + +R_PPC_ADDR16_LO = 4 /* Lower half of (S+A) */ +R_PPC_ADDR16_HI = 5 /* Upper half of (S+A) */ +R_PPC_ADDR16_HA = 6 /* High Adjusted (S+A) */ +R_PPC_RELATIVE = 22 + +/* + * r3 = desired final address + */ + +_GLOBAL(relocate) + + mflr r0 /* Save our LR */ + bl 0f /* Find our current runtime address */ +0: mflr r12 /* Make it accessible */ + mtlr r0 + + lwz r11, (p_dyn - 0b)(r12) + add r11, r11, r12 /* runtime address of .dynamic section */ + lwz r9, (p_rela - 0b)(r12) + add r9, r9, r12 /* runtime address of .rela.dyn section */ + lwz r10, (p_st - 0b)(r12) + add r10, r10, r12 /* runtime address of _stext section */ + lwz r13, (p_sym - 0b)(r12) + add r13, r13, r12 /* runtime address of .dynsym section */ + + /* + * Scan the dynamic section for RELA, RELASZ entries + */ + li r6, 0 + li r7, 0 + li r8, 0 +1: lwz r5, 0(r11) /* ELF_Dyn.d_tag */ + cmpwi r5, 0 /* End of ELF_Dyn[] */ + beq eodyn + cmpwi r5, DT_RELA + bne relasz + lwz r7, 4(r11) /* r7 = rela.link */ + b skip +relasz: + cmpwi r5, DT_RELASZ + bne relaent + lwz r8, 4(r11) /* r8 = Total Rela relocs size */ + b skip +relaent: + cmpwi r5, DT_RELAENT + bne skip + lwz r6, 4(r11) /* r6 = Size of one Rela reloc */ +skip: + addi r11, r11, 8 + b 1b +eodyn: /* End of Dyn Table scan */ + + /* Check if we have found all the entries */ + cmpwi r7, 0 + beq done + cmpwi r8, 0 + beq done + cmpwi r6, 0 + beq done + + + /* + * Work out the current offset from the link time address of .rela + * section. + * cur_offset[r7] = rela.run[r9] - rela.link [r7] + * _stext.link[r12] = _stext.run[r10] - cur_offset[r7] + * final_offset[r3] = _stext.final[r3] - _stext.link[r12] + */ + subf r7, r7, r9 /* cur_offset */ + subf r12, r7, r10 + subf r3, r12, r3 /* final_offset */ + + subf r8, r6, r8 /* relaz -= relaent */ + /* + * Scan through the .rela table and process each entry + * r9 - points to the current .rela table entry + * r13 - points to the symbol table + */ + + /* + * Check if we have a relocation based on symbol + * r5 will hold the value of the symbol. + */ +applyrela: + lwz r4, 4(r9) /* r4 = rela.r_info */ + srwi r5, r4, 8 /* ELF32_R_SYM(r_info) */ + cmpwi r5, STN_UNDEF /* sym == STN_UNDEF ? */ + beq get_type /* value = 0 */ + /* Find the value of the symbol at index(r5) */ + slwi r5, r5, 4 /* r5 = r5 * sizeof(Elf32_Sym) */ + add r12, r13, r5 /* r12 = &__dyn_sym[Index] */ + + /* + * GNU ld has a bug, where dynamic relocs based on + * STB_LOCAL symbols, the value should be assumed + * to be zero. - Alan Modra + */ + /* XXX: Do we need to check if we are using GNU ld ? */ + lbz r5, 12(r12) /* r5 = dyn_sym[Index].st_info */ + extrwi r5, r5, 4, 24 /* r5 = ELF32_ST_BIND(r5) */ + cmpwi r5, STB_LOCAL /* st_value = 0, ld bug */ + beq get_type /* We have r5 = 0 */ + lwz r5, 4(r12) /* r5 = __dyn_sym[Index].st_value */ + +get_type: + /* Load the relocation type to r4 */ + extrwi r4, r4, 8, 24 /* r4 = ELF32_R_TYPE(r_info) = ((char*)r4)[3] */ + + /* R_PPC_RELATIVE */ + cmpwi r4, R_PPC_RELATIVE + bne hi16 + lwz r4, 0(r9) /* r_offset */ + lwz r0, 8(r9) /* r_addend */ + add r0, r0, r3 /* final addend */ + stwx r0, r4, r7 /* memory[r4+r7]) = (u32)r0 */ + b nxtrela /* continue */ + + /* R_PPC_ADDR16_HI */ +hi16: + cmpwi r4, R_PPC_ADDR16_HI + bne ha16 + lwz r4, 0(r9) /* r_offset */ + lwz r0, 8(r9) /* r_addend */ + add r0, r0, r3 + add r0, r0, r5 /* r0 = (S+A+Offset) */ + extrwi r0, r0, 16, 0 /* r0 = (r0 >> 16) */ + b store_half + + /* R_PPC_ADDR16_HA */ +ha16: + cmpwi r4, R_PPC_ADDR16_HA + bne lo16 + lwz r4, 0(r9) /* r_offset */ + lwz r0, 8(r9) /* r_addend */ + add r0, r0, r3 + add r0, r0, r5 /* r0 = (S+A+Offset) */ + extrwi r5, r0, 1, 16 /* Extract bit 16 */ + extrwi r0, r0, 16, 0 /* r0 = (r0 >> 16) */ + add r0, r0, r5 /* Add it to r0 */ + b store_half + + /* R_PPC_ADDR16_LO */ +lo16: + cmpwi r4, R_PPC_ADDR16_LO + bne nxtrela + lwz r4, 0(r9) /* r_offset */ + lwz r0, 8(r9) /* r_addend */ + add r0, r0, r3 + add r0, r0, r5 /* r0 = (S+A+Offset) */ + extrwi r0, r0, 16, 16 /* r0 &= 0xffff */ + /* Fall through to */ + + /* Store half word */ +store_half: + sthx r0, r4, r7 /* memory[r4+r7] = (u16)r0 */ + +nxtrela: + /* + * We have to flush the modified instructions to the + * main storage from the d-cache. And also, invalidate the + * cached instructions in i-cache which has been modified. + * + * We delay the sync / isync operation till the end, since + * we won't be executing the modified instructions until + * we return from here. + */ + dcbst r4,r7 + sync /* Ensure the data is flushed before icbi */ + icbi r4,r7 + cmpwi r8, 0 /* relasz = 0 ? */ + ble done + add r9, r9, r6 /* move to next entry in the .rela table */ + subf r8, r6, r8 /* relasz -= relaent */ + b applyrela + +done: + sync /* Wait for the flush to finish */ + isync /* Discard prefetched instructions */ + blr + +p_dyn: .long __dynamic_start - 0b +p_rela: .long __rela_dyn_start - 0b +p_sym: .long __dynamic_symtab - 0b +p_st: .long _stext - 0b diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index e037c7494fd8..4174b4b23246 100644 --- a/arch/powerpc/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -568,6 +568,12 @@ static void rtas_flash_firmware(int reboot_type) } /* + * Just before starting the firmware flash, cancel the event scan work + * to avoid any soft lockup issues. + */ + rtas_cancel_event_scan(); + + /* * NOTE: the "first" block must be under 4GB, so we create * an entry with no data blocks in the reserved buffer in * the kernel data segment. diff --git a/arch/powerpc/kernel/rtasd.c b/arch/powerpc/kernel/rtasd.c index 481ef064c8f1..1045ff49cc6d 100644 --- a/arch/powerpc/kernel/rtasd.c +++ b/arch/powerpc/kernel/rtasd.c @@ -472,6 +472,13 @@ static void start_event_scan(void) &event_scan_work, event_scan_delay); } +/* Cancel the rtas event scan work */ +void rtas_cancel_event_scan(void) +{ + cancel_delayed_work_sync(&event_scan_work); +} +EXPORT_SYMBOL_GPL(rtas_cancel_event_scan); + static int __init rtas_init(void) { struct proc_dir_entry *entry; diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index fb9bb46e7e88..4cb8f1e9d044 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -35,6 +35,8 @@ #include <linux/pci.h> #include <linux/lockdep.h> #include <linux/memblock.h> +#include <linux/hugetlb.h> + #include <asm/io.h> #include <asm/kdump.h> #include <asm/prom.h> @@ -64,6 +66,7 @@ #include <asm/mmu_context.h> #include <asm/code-patching.h> #include <asm/kvm_ppc.h> +#include <asm/hugetlb.h> #include "setup.h" @@ -217,6 +220,13 @@ void __init early_setup(unsigned long dt_ptr) /* Initialize the hash table or TLB handling */ early_init_mmu(); + /* + * Reserve any gigantic pages requested on the command line. + * memblock needs to have been initialized by the time this is + * called since this will reserve memory. + */ + reserve_hugetlb_gpages(); + DBG(" <- early_setup()\n"); } diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 6df70907d60a..46695febc09f 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -27,7 +27,7 @@ #include <linux/spinlock.h> #include <linux/cache.h> #include <linux/err.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/cpu.h> #include <linux/notifier.h> #include <linux/topology.h> @@ -187,7 +187,8 @@ int smp_request_message_ipi(int virq, int msg) return 1; } #endif - err = request_irq(virq, smp_ipi_action[msg], IRQF_PERCPU, + err = request_irq(virq, smp_ipi_action[msg], + IRQF_PERCPU | IRQF_NO_THREAD, smp_ipi_name[msg], 0); WARN(err < 0, "unable to request_irq %d for %s (rc %d)\n", virq, smp_ipi_name[msg], err); diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index ce035c1905f0..883e74c0d1b3 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -1,4 +1,4 @@ -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/cpu.h> #include <linux/smp.h> #include <linux/percpu.h> @@ -18,6 +18,7 @@ #include <asm/machdep.h> #include <asm/smp.h> #include <asm/pmc.h> +#include <asm/system.h> #include "cacheinfo.h" @@ -37,12 +38,12 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices); /* Time in microseconds we delay before sleeping in the idle loop */ DEFINE_PER_CPU(long, smt_snooze_delay) = { 100 }; -static ssize_t store_smt_snooze_delay(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t store_smt_snooze_delay(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { - struct cpu *cpu = container_of(dev, struct cpu, sysdev); + struct cpu *cpu = container_of(dev, struct cpu, dev); ssize_t ret; long snooze; @@ -50,21 +51,22 @@ static ssize_t store_smt_snooze_delay(struct sys_device *dev, if (ret != 1) return -EINVAL; - per_cpu(smt_snooze_delay, cpu->sysdev.id) = snooze; + per_cpu(smt_snooze_delay, cpu->dev.id) = snooze; + update_smt_snooze_delay(snooze); return count; } -static ssize_t show_smt_snooze_delay(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t show_smt_snooze_delay(struct device *dev, + struct device_attribute *attr, char *buf) { - struct cpu *cpu = container_of(dev, struct cpu, sysdev); + struct cpu *cpu = container_of(dev, struct cpu, dev); - return sprintf(buf, "%ld\n", per_cpu(smt_snooze_delay, cpu->sysdev.id)); + return sprintf(buf, "%ld\n", per_cpu(smt_snooze_delay, cpu->dev.id)); } -static SYSDEV_ATTR(smt_snooze_delay, 0644, show_smt_snooze_delay, +static DEVICE_ATTR(smt_snooze_delay, 0644, show_smt_snooze_delay, store_smt_snooze_delay); static int __init setup_smt_snooze_delay(char *str) @@ -117,25 +119,25 @@ static void write_##NAME(void *val) \ ppc_enable_pmcs(); \ mtspr(ADDRESS, *(unsigned long *)val); \ } \ -static ssize_t show_##NAME(struct sys_device *dev, \ - struct sysdev_attribute *attr, \ +static ssize_t show_##NAME(struct device *dev, \ + struct device_attribute *attr, \ char *buf) \ { \ - struct cpu *cpu = container_of(dev, struct cpu, sysdev); \ + struct cpu *cpu = container_of(dev, struct cpu, dev); \ unsigned long val; \ - smp_call_function_single(cpu->sysdev.id, read_##NAME, &val, 1); \ + smp_call_function_single(cpu->dev.id, read_##NAME, &val, 1); \ return sprintf(buf, "%lx\n", val); \ } \ static ssize_t __used \ - store_##NAME(struct sys_device *dev, struct sysdev_attribute *attr, \ + store_##NAME(struct device *dev, struct device_attribute *attr, \ const char *buf, size_t count) \ { \ - struct cpu *cpu = container_of(dev, struct cpu, sysdev); \ + struct cpu *cpu = container_of(dev, struct cpu, dev); \ unsigned long val; \ int ret = sscanf(buf, "%lx", &val); \ if (ret != 1) \ return -EINVAL; \ - smp_call_function_single(cpu->sysdev.id, write_##NAME, &val, 1); \ + smp_call_function_single(cpu->dev.id, write_##NAME, &val, 1); \ return count; \ } @@ -177,23 +179,25 @@ SYSFS_PMCSETUP(mmcra, SPRN_MMCRA); SYSFS_PMCSETUP(purr, SPRN_PURR); SYSFS_PMCSETUP(spurr, SPRN_SPURR); SYSFS_PMCSETUP(dscr, SPRN_DSCR); +SYSFS_PMCSETUP(pir, SPRN_PIR); -static SYSDEV_ATTR(mmcra, 0600, show_mmcra, store_mmcra); -static SYSDEV_ATTR(spurr, 0600, show_spurr, NULL); -static SYSDEV_ATTR(dscr, 0600, show_dscr, store_dscr); -static SYSDEV_ATTR(purr, 0600, show_purr, store_purr); +static DEVICE_ATTR(mmcra, 0600, show_mmcra, store_mmcra); +static DEVICE_ATTR(spurr, 0600, show_spurr, NULL); +static DEVICE_ATTR(dscr, 0600, show_dscr, store_dscr); +static DEVICE_ATTR(purr, 0600, show_purr, store_purr); +static DEVICE_ATTR(pir, 0400, show_pir, NULL); unsigned long dscr_default = 0; EXPORT_SYMBOL(dscr_default); -static ssize_t show_dscr_default(struct sysdev_class *class, - struct sysdev_class_attribute *attr, char *buf) +static ssize_t show_dscr_default(struct device *dev, + struct device_attribute *attr, char *buf) { return sprintf(buf, "%lx\n", dscr_default); } -static ssize_t __used store_dscr_default(struct sysdev_class *class, - struct sysdev_class_attribute *attr, const char *buf, +static ssize_t __used store_dscr_default(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { unsigned long val; @@ -207,15 +211,14 @@ static ssize_t __used store_dscr_default(struct sysdev_class *class, return count; } -static SYSDEV_CLASS_ATTR(dscr_default, 0600, +static DEVICE_ATTR(dscr_default, 0600, show_dscr_default, store_dscr_default); static void sysfs_create_dscr_default(void) { int err = 0; if (cpu_has_feature(CPU_FTR_DSCR)) - err = sysfs_create_file(&cpu_sysdev_class.kset.kobj, - &attr_dscr_default.attr); + err = device_create_file(cpu_subsys.dev_root, &dev_attr_dscr_default); } #endif /* CONFIG_PPC64 */ @@ -259,72 +262,72 @@ SYSFS_PMCSETUP(tsr3, SPRN_PA6T_TSR3); #endif /* HAS_PPC_PMC_PA6T */ #ifdef HAS_PPC_PMC_IBM -static struct sysdev_attribute ibm_common_attrs[] = { - _SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0), - _SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1), +static struct device_attribute ibm_common_attrs[] = { + __ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0), + __ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1), }; #endif /* HAS_PPC_PMC_G4 */ #ifdef HAS_PPC_PMC_G4 -static struct sysdev_attribute g4_common_attrs[] = { - _SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0), - _SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1), - _SYSDEV_ATTR(mmcr2, 0600, show_mmcr2, store_mmcr2), +static struct device_attribute g4_common_attrs[] = { + __ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0), + __ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1), + __ATTR(mmcr2, 0600, show_mmcr2, store_mmcr2), }; #endif /* HAS_PPC_PMC_G4 */ -static struct sysdev_attribute classic_pmc_attrs[] = { - _SYSDEV_ATTR(pmc1, 0600, show_pmc1, store_pmc1), - _SYSDEV_ATTR(pmc2, 0600, show_pmc2, store_pmc2), - _SYSDEV_ATTR(pmc3, 0600, show_pmc3, store_pmc3), - _SYSDEV_ATTR(pmc4, 0600, show_pmc4, store_pmc4), - _SYSDEV_ATTR(pmc5, 0600, show_pmc5, store_pmc5), - _SYSDEV_ATTR(pmc6, 0600, show_pmc6, store_pmc6), +static struct device_attribute classic_pmc_attrs[] = { + __ATTR(pmc1, 0600, show_pmc1, store_pmc1), + __ATTR(pmc2, 0600, show_pmc2, store_pmc2), + __ATTR(pmc3, 0600, show_pmc3, store_pmc3), + __ATTR(pmc4, 0600, show_pmc4, store_pmc4), + __ATTR(pmc5, 0600, show_pmc5, store_pmc5), + __ATTR(pmc6, 0600, show_pmc6, store_pmc6), #ifdef CONFIG_PPC64 - _SYSDEV_ATTR(pmc7, 0600, show_pmc7, store_pmc7), - _SYSDEV_ATTR(pmc8, 0600, show_pmc8, store_pmc8), + __ATTR(pmc7, 0600, show_pmc7, store_pmc7), + __ATTR(pmc8, 0600, show_pmc8, store_pmc8), #endif }; #ifdef HAS_PPC_PMC_PA6T -static struct sysdev_attribute pa6t_attrs[] = { - _SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0), - _SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1), - _SYSDEV_ATTR(pmc0, 0600, show_pa6t_pmc0, store_pa6t_pmc0), - _SYSDEV_ATTR(pmc1, 0600, show_pa6t_pmc1, store_pa6t_pmc1), - _SYSDEV_ATTR(pmc2, 0600, show_pa6t_pmc2, store_pa6t_pmc2), - _SYSDEV_ATTR(pmc3, 0600, show_pa6t_pmc3, store_pa6t_pmc3), - _SYSDEV_ATTR(pmc4, 0600, show_pa6t_pmc4, store_pa6t_pmc4), - _SYSDEV_ATTR(pmc5, 0600, show_pa6t_pmc5, store_pa6t_pmc5), +static struct device_attribute pa6t_attrs[] = { + __ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0), + __ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1), + __ATTR(pmc0, 0600, show_pa6t_pmc0, store_pa6t_pmc0), + __ATTR(pmc1, 0600, show_pa6t_pmc1, store_pa6t_pmc1), + __ATTR(pmc2, 0600, show_pa6t_pmc2, store_pa6t_pmc2), + __ATTR(pmc3, 0600, show_pa6t_pmc3, store_pa6t_pmc3), + __ATTR(pmc4, 0600, show_pa6t_pmc4, store_pa6t_pmc4), + __ATTR(pmc5, 0600, show_pa6t_pmc5, store_pa6t_pmc5), #ifdef CONFIG_DEBUG_KERNEL - _SYSDEV_ATTR(hid0, 0600, show_hid0, store_hid0), - _SYSDEV_ATTR(hid1, 0600, show_hid1, store_hid1), - _SYSDEV_ATTR(hid4, 0600, show_hid4, store_hid4), - _SYSDEV_ATTR(hid5, 0600, show_hid5, store_hid5), - _SYSDEV_ATTR(ima0, 0600, show_ima0, store_ima0), - _SYSDEV_ATTR(ima1, 0600, show_ima1, store_ima1), - _SYSDEV_ATTR(ima2, 0600, show_ima2, store_ima2), - _SYSDEV_ATTR(ima3, 0600, show_ima3, store_ima3), - _SYSDEV_ATTR(ima4, 0600, show_ima4, store_ima4), - _SYSDEV_ATTR(ima5, 0600, show_ima5, store_ima5), - _SYSDEV_ATTR(ima6, 0600, show_ima6, store_ima6), - _SYSDEV_ATTR(ima7, 0600, show_ima7, store_ima7), - _SYSDEV_ATTR(ima8, 0600, show_ima8, store_ima8), - _SYSDEV_ATTR(ima9, 0600, show_ima9, store_ima9), - _SYSDEV_ATTR(imaat, 0600, show_imaat, store_imaat), - _SYSDEV_ATTR(btcr, 0600, show_btcr, store_btcr), - _SYSDEV_ATTR(pccr, 0600, show_pccr, store_pccr), - _SYSDEV_ATTR(rpccr, 0600, show_rpccr, store_rpccr), - _SYSDEV_ATTR(der, 0600, show_der, store_der), - _SYSDEV_ATTR(mer, 0600, show_mer, store_mer), - _SYSDEV_ATTR(ber, 0600, show_ber, store_ber), - _SYSDEV_ATTR(ier, 0600, show_ier, store_ier), - _SYSDEV_ATTR(sier, 0600, show_sier, store_sier), - _SYSDEV_ATTR(siar, 0600, show_siar, store_siar), - _SYSDEV_ATTR(tsr0, 0600, show_tsr0, store_tsr0), - _SYSDEV_ATTR(tsr1, 0600, show_tsr1, store_tsr1), - _SYSDEV_ATTR(tsr2, 0600, show_tsr2, store_tsr2), - _SYSDEV_ATTR(tsr3, 0600, show_tsr3, store_tsr3), + __ATTR(hid0, 0600, show_hid0, store_hid0), + __ATTR(hid1, 0600, show_hid1, store_hid1), + __ATTR(hid4, 0600, show_hid4, store_hid4), + __ATTR(hid5, 0600, show_hid5, store_hid5), + __ATTR(ima0, 0600, show_ima0, store_ima0), + __ATTR(ima1, 0600, show_ima1, store_ima1), + __ATTR(ima2, 0600, show_ima2, store_ima2), + __ATTR(ima3, 0600, show_ima3, store_ima3), + __ATTR(ima4, 0600, show_ima4, store_ima4), + __ATTR(ima5, 0600, show_ima5, store_ima5), + __ATTR(ima6, 0600, show_ima6, store_ima6), + __ATTR(ima7, 0600, show_ima7, store_ima7), + __ATTR(ima8, 0600, show_ima8, store_ima8), + __ATTR(ima9, 0600, show_ima9, store_ima9), + __ATTR(imaat, 0600, show_imaat, store_imaat), + __ATTR(btcr, 0600, show_btcr, store_btcr), + __ATTR(pccr, 0600, show_pccr, store_pccr), + __ATTR(rpccr, 0600, show_rpccr, store_rpccr), + __ATTR(der, 0600, show_der, store_der), + __ATTR(mer, 0600, show_mer, store_mer), + __ATTR(ber, 0600, show_ber, store_ber), + __ATTR(ier, 0600, show_ier, store_ier), + __ATTR(sier, 0600, show_sier, store_sier), + __ATTR(siar, 0600, show_siar, store_siar), + __ATTR(tsr0, 0600, show_tsr0, store_tsr0), + __ATTR(tsr1, 0600, show_tsr1, store_tsr1), + __ATTR(tsr2, 0600, show_tsr2, store_tsr2), + __ATTR(tsr3, 0600, show_tsr3, store_tsr3), #endif /* CONFIG_DEBUG_KERNEL */ }; #endif /* HAS_PPC_PMC_PA6T */ @@ -333,14 +336,14 @@ static struct sysdev_attribute pa6t_attrs[] = { static void __cpuinit register_cpu_online(unsigned int cpu) { struct cpu *c = &per_cpu(cpu_devices, cpu); - struct sys_device *s = &c->sysdev; - struct sysdev_attribute *attrs, *pmc_attrs; + struct device *s = &c->dev; + struct device_attribute *attrs, *pmc_attrs; int i, nattrs; #ifdef CONFIG_PPC64 if (!firmware_has_feature(FW_FEATURE_ISERIES) && cpu_has_feature(CPU_FTR_SMT)) - sysdev_create_file(s, &attr_smt_snooze_delay); + device_create_file(s, &dev_attr_smt_snooze_delay); #endif /* PMC stuff */ @@ -348,14 +351,14 @@ static void __cpuinit register_cpu_online(unsigned int cpu) #ifdef HAS_PPC_PMC_IBM case PPC_PMC_IBM: attrs = ibm_common_attrs; - nattrs = sizeof(ibm_common_attrs) / sizeof(struct sysdev_attribute); + nattrs = sizeof(ibm_common_attrs) / sizeof(struct device_attribute); pmc_attrs = classic_pmc_attrs; break; #endif /* HAS_PPC_PMC_IBM */ #ifdef HAS_PPC_PMC_G4 case PPC_PMC_G4: attrs = g4_common_attrs; - nattrs = sizeof(g4_common_attrs) / sizeof(struct sysdev_attribute); + nattrs = sizeof(g4_common_attrs) / sizeof(struct device_attribute); pmc_attrs = classic_pmc_attrs; break; #endif /* HAS_PPC_PMC_G4 */ @@ -363,7 +366,7 @@ static void __cpuinit register_cpu_online(unsigned int cpu) case PPC_PMC_PA6T: /* PA Semi starts counting at PMC0 */ attrs = pa6t_attrs; - nattrs = sizeof(pa6t_attrs) / sizeof(struct sysdev_attribute); + nattrs = sizeof(pa6t_attrs) / sizeof(struct device_attribute); pmc_attrs = NULL; break; #endif /* HAS_PPC_PMC_PA6T */ @@ -374,24 +377,27 @@ static void __cpuinit register_cpu_online(unsigned int cpu) } for (i = 0; i < nattrs; i++) - sysdev_create_file(s, &attrs[i]); + device_create_file(s, &attrs[i]); if (pmc_attrs) for (i = 0; i < cur_cpu_spec->num_pmcs; i++) - sysdev_create_file(s, &pmc_attrs[i]); + device_create_file(s, &pmc_attrs[i]); #ifdef CONFIG_PPC64 if (cpu_has_feature(CPU_FTR_MMCRA)) - sysdev_create_file(s, &attr_mmcra); + device_create_file(s, &dev_attr_mmcra); if (cpu_has_feature(CPU_FTR_PURR)) - sysdev_create_file(s, &attr_purr); + device_create_file(s, &dev_attr_purr); if (cpu_has_feature(CPU_FTR_SPURR)) - sysdev_create_file(s, &attr_spurr); + device_create_file(s, &dev_attr_spurr); if (cpu_has_feature(CPU_FTR_DSCR)) - sysdev_create_file(s, &attr_dscr); + device_create_file(s, &dev_attr_dscr); + + if (cpu_has_feature(CPU_FTR_PPCAS_ARCH_V2)) + device_create_file(s, &dev_attr_pir); #endif /* CONFIG_PPC64 */ cacheinfo_cpu_online(cpu); @@ -401,8 +407,8 @@ static void __cpuinit register_cpu_online(unsigned int cpu) static void unregister_cpu_online(unsigned int cpu) { struct cpu *c = &per_cpu(cpu_devices, cpu); - struct sys_device *s = &c->sysdev; - struct sysdev_attribute *attrs, *pmc_attrs; + struct device *s = &c->dev; + struct device_attribute *attrs, *pmc_attrs; int i, nattrs; BUG_ON(!c->hotpluggable); @@ -410,7 +416,7 @@ static void unregister_cpu_online(unsigned int cpu) #ifdef CONFIG_PPC64 if (!firmware_has_feature(FW_FEATURE_ISERIES) && cpu_has_feature(CPU_FTR_SMT)) - sysdev_remove_file(s, &attr_smt_snooze_delay); + device_remove_file(s, &dev_attr_smt_snooze_delay); #endif /* PMC stuff */ @@ -418,14 +424,14 @@ static void unregister_cpu_online(unsigned int cpu) #ifdef HAS_PPC_PMC_IBM case PPC_PMC_IBM: attrs = ibm_common_attrs; - nattrs = sizeof(ibm_common_attrs) / sizeof(struct sysdev_attribute); + nattrs = sizeof(ibm_common_attrs) / sizeof(struct device_attribute); pmc_attrs = classic_pmc_attrs; break; #endif /* HAS_PPC_PMC_IBM */ #ifdef HAS_PPC_PMC_G4 case PPC_PMC_G4: attrs = g4_common_attrs; - nattrs = sizeof(g4_common_attrs) / sizeof(struct sysdev_attribute); + nattrs = sizeof(g4_common_attrs) / sizeof(struct device_attribute); pmc_attrs = classic_pmc_attrs; break; #endif /* HAS_PPC_PMC_G4 */ @@ -433,7 +439,7 @@ static void unregister_cpu_online(unsigned int cpu) case PPC_PMC_PA6T: /* PA Semi starts counting at PMC0 */ attrs = pa6t_attrs; - nattrs = sizeof(pa6t_attrs) / sizeof(struct sysdev_attribute); + nattrs = sizeof(pa6t_attrs) / sizeof(struct device_attribute); pmc_attrs = NULL; break; #endif /* HAS_PPC_PMC_PA6T */ @@ -444,24 +450,27 @@ static void unregister_cpu_online(unsigned int cpu) } for (i = 0; i < nattrs; i++) - sysdev_remove_file(s, &attrs[i]); + device_remove_file(s, &attrs[i]); if (pmc_attrs) for (i = 0; i < cur_cpu_spec->num_pmcs; i++) - sysdev_remove_file(s, &pmc_attrs[i]); + device_remove_file(s, &pmc_attrs[i]); #ifdef CONFIG_PPC64 if (cpu_has_feature(CPU_FTR_MMCRA)) - sysdev_remove_file(s, &attr_mmcra); + device_remove_file(s, &dev_attr_mmcra); if (cpu_has_feature(CPU_FTR_PURR)) - sysdev_remove_file(s, &attr_purr); + device_remove_file(s, &dev_attr_purr); if (cpu_has_feature(CPU_FTR_SPURR)) - sysdev_remove_file(s, &attr_spurr); + device_remove_file(s, &dev_attr_spurr); if (cpu_has_feature(CPU_FTR_DSCR)) - sysdev_remove_file(s, &attr_dscr); + device_remove_file(s, &dev_attr_dscr); + + if (cpu_has_feature(CPU_FTR_PPCAS_ARCH_V2)) + device_remove_file(s, &dev_attr_pir); #endif /* CONFIG_PPC64 */ cacheinfo_cpu_offline(cpu); @@ -513,70 +522,70 @@ static struct notifier_block __cpuinitdata sysfs_cpu_nb = { static DEFINE_MUTEX(cpu_mutex); -int cpu_add_sysdev_attr(struct sysdev_attribute *attr) +int cpu_add_dev_attr(struct device_attribute *attr) { int cpu; mutex_lock(&cpu_mutex); for_each_possible_cpu(cpu) { - sysdev_create_file(get_cpu_sysdev(cpu), attr); + device_create_file(get_cpu_device(cpu), attr); } mutex_unlock(&cpu_mutex); return 0; } -EXPORT_SYMBOL_GPL(cpu_add_sysdev_attr); +EXPORT_SYMBOL_GPL(cpu_add_dev_attr); -int cpu_add_sysdev_attr_group(struct attribute_group *attrs) +int cpu_add_dev_attr_group(struct attribute_group *attrs) { int cpu; - struct sys_device *sysdev; + struct device *dev; int ret; mutex_lock(&cpu_mutex); for_each_possible_cpu(cpu) { - sysdev = get_cpu_sysdev(cpu); - ret = sysfs_create_group(&sysdev->kobj, attrs); + dev = get_cpu_device(cpu); + ret = sysfs_create_group(&dev->kobj, attrs); WARN_ON(ret != 0); } mutex_unlock(&cpu_mutex); return 0; } -EXPORT_SYMBOL_GPL(cpu_add_sysdev_attr_group); +EXPORT_SYMBOL_GPL(cpu_add_dev_attr_group); -void cpu_remove_sysdev_attr(struct sysdev_attribute *attr) +void cpu_remove_dev_attr(struct device_attribute *attr) { int cpu; mutex_lock(&cpu_mutex); for_each_possible_cpu(cpu) { - sysdev_remove_file(get_cpu_sysdev(cpu), attr); + device_remove_file(get_cpu_device(cpu), attr); } mutex_unlock(&cpu_mutex); } -EXPORT_SYMBOL_GPL(cpu_remove_sysdev_attr); +EXPORT_SYMBOL_GPL(cpu_remove_dev_attr); -void cpu_remove_sysdev_attr_group(struct attribute_group *attrs) +void cpu_remove_dev_attr_group(struct attribute_group *attrs) { int cpu; - struct sys_device *sysdev; + struct device *dev; mutex_lock(&cpu_mutex); for_each_possible_cpu(cpu) { - sysdev = get_cpu_sysdev(cpu); - sysfs_remove_group(&sysdev->kobj, attrs); + dev = get_cpu_device(cpu); + sysfs_remove_group(&dev->kobj, attrs); } mutex_unlock(&cpu_mutex); } -EXPORT_SYMBOL_GPL(cpu_remove_sysdev_attr_group); +EXPORT_SYMBOL_GPL(cpu_remove_dev_attr_group); /* NUMA stuff */ @@ -590,18 +599,18 @@ static void register_nodes(void) register_one_node(i); } -int sysfs_add_device_to_node(struct sys_device *dev, int nid) +int sysfs_add_device_to_node(struct device *dev, int nid) { struct node *node = &node_devices[nid]; - return sysfs_create_link(&node->sysdev.kobj, &dev->kobj, + return sysfs_create_link(&node->dev.kobj, &dev->kobj, kobject_name(&dev->kobj)); } EXPORT_SYMBOL_GPL(sysfs_add_device_to_node); -void sysfs_remove_device_from_node(struct sys_device *dev, int nid) +void sysfs_remove_device_from_node(struct device *dev, int nid) { struct node *node = &node_devices[nid]; - sysfs_remove_link(&node->sysdev.kobj, kobject_name(&dev->kobj)); + sysfs_remove_link(&node->dev.kobj, kobject_name(&dev->kobj)); } EXPORT_SYMBOL_GPL(sysfs_remove_device_from_node); @@ -614,14 +623,14 @@ static void register_nodes(void) #endif /* Only valid if CPU is present. */ -static ssize_t show_physical_id(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t show_physical_id(struct device *dev, + struct device_attribute *attr, char *buf) { - struct cpu *cpu = container_of(dev, struct cpu, sysdev); + struct cpu *cpu = container_of(dev, struct cpu, dev); - return sprintf(buf, "%d\n", get_hard_smp_processor_id(cpu->sysdev.id)); + return sprintf(buf, "%d\n", get_hard_smp_processor_id(cpu->dev.id)); } -static SYSDEV_ATTR(physical_id, 0444, show_physical_id, NULL); +static DEVICE_ATTR(physical_id, 0444, show_physical_id, NULL); static int __init topology_init(void) { @@ -646,7 +655,7 @@ static int __init topology_init(void) if (cpu_online(cpu) || c->hotpluggable) { register_cpu(c, cpu); - sysdev_create_file(&c->sysdev, &attr_physical_id); + device_create_file(&c->dev, &dev_attr_physical_id); } if (cpu_online(cpu)) diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 522bb1dfc353..567dd7c3ac2a 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -86,8 +86,6 @@ static struct clocksource clocksource_rtc = { .rating = 400, .flags = CLOCK_SOURCE_IS_CONTINUOUS, .mask = CLOCKSOURCE_MASK(64), - .shift = 22, - .mult = 0, /* To be filled in */ .read = rtc_read, }; @@ -97,8 +95,6 @@ static struct clocksource clocksource_timebase = { .rating = 400, .flags = CLOCK_SOURCE_IS_CONTINUOUS, .mask = CLOCKSOURCE_MASK(64), - .shift = 22, - .mult = 0, /* To be filled in */ .read = timebase_read, }; @@ -110,22 +106,16 @@ static void decrementer_set_mode(enum clock_event_mode mode, struct clock_event_device *dev); static struct clock_event_device decrementer_clockevent = { - .name = "decrementer", - .rating = 200, - .shift = 0, /* To be filled in */ - .mult = 0, /* To be filled in */ - .irq = 0, - .set_next_event = decrementer_set_next_event, - .set_mode = decrementer_set_mode, - .features = CLOCK_EVT_FEAT_ONESHOT, + .name = "decrementer", + .rating = 200, + .irq = 0, + .set_next_event = decrementer_set_next_event, + .set_mode = decrementer_set_mode, + .features = CLOCK_EVT_FEAT_ONESHOT, }; -struct decrementer_clock { - struct clock_event_device event; - u64 next_tb; -}; - -static DEFINE_PER_CPU(struct decrementer_clock, decrementers); +DEFINE_PER_CPU(u64, decrementers_next_tb); +static DEFINE_PER_CPU(struct clock_event_device, decrementers); #ifdef CONFIG_PPC_ISERIES static unsigned long __initdata iSeries_recal_titan; @@ -168,13 +158,13 @@ EXPORT_SYMBOL_GPL(ppc_tb_freq); #ifdef CONFIG_VIRT_CPU_ACCOUNTING /* * Factors for converting from cputime_t (timebase ticks) to - * jiffies, milliseconds, seconds, and clock_t (1/USER_HZ seconds). + * jiffies, microseconds, seconds, and clock_t (1/USER_HZ seconds). * These are all stored as 0.64 fixed-point binary fractions. */ u64 __cputime_jiffies_factor; EXPORT_SYMBOL(__cputime_jiffies_factor); -u64 __cputime_msec_factor; -EXPORT_SYMBOL(__cputime_msec_factor); +u64 __cputime_usec_factor; +EXPORT_SYMBOL(__cputime_usec_factor); u64 __cputime_sec_factor; EXPORT_SYMBOL(__cputime_sec_factor); u64 __cputime_clockt_factor; @@ -192,8 +182,8 @@ static void calc_cputime_factors(void) div128_by_32(HZ, 0, tb_ticks_per_sec, &res); __cputime_jiffies_factor = res.result_low; - div128_by_32(1000, 0, tb_ticks_per_sec, &res); - __cputime_msec_factor = res.result_low; + div128_by_32(1000000, 0, tb_ticks_per_sec, &res); + __cputime_usec_factor = res.result_low; div128_by_32(1, 0, tb_ticks_per_sec, &res); __cputime_sec_factor = res.result_low; div128_by_32(USER_HZ, 0, tb_ticks_per_sec, &res); @@ -441,7 +431,7 @@ EXPORT_SYMBOL(profile_pc); /* * This function recalibrates the timebase based on the 49-bit time-of-day * value in the Titan chip. The Titan is much more accurate than the value - * returned by the service processor for the timebase frequency. + * returned by the service processor for the timebase frequency. */ static int __init iSeries_tb_recal(void) @@ -576,9 +566,8 @@ void arch_irq_work_raise(void) void timer_interrupt(struct pt_regs * regs) { struct pt_regs *old_regs; - struct decrementer_clock *decrementer = &__get_cpu_var(decrementers); - struct clock_event_device *evt = &decrementer->event; - u64 now; + u64 *next_tb = &__get_cpu_var(decrementers_next_tb); + struct clock_event_device *evt = &__get_cpu_var(decrementers); /* Ensure a positive value is written to the decrementer, or else * some CPUs will continue to take decrementer exceptions. @@ -613,16 +602,9 @@ void timer_interrupt(struct pt_regs * regs) get_lppaca()->int_dword.fields.decr_int = 0; #endif - now = get_tb_or_rtc(); - if (now >= decrementer->next_tb) { - decrementer->next_tb = ~(u64)0; - if (evt->event_handler) - evt->event_handler(evt); - } else { - now = decrementer->next_tb - now; - if (now <= DECREMENTER_MAX) - set_dec((int)now); - } + *next_tb = ~(u64)0; + if (evt->event_handler) + evt->event_handler(evt); #ifdef CONFIG_PPC_ISERIES if (firmware_has_feature(FW_FEATURE_ISERIES) && hvlpevent_is_pending()) @@ -650,9 +632,9 @@ static void generic_suspend_disable_irqs(void) * with suspending. */ - set_dec(0x7fffffff); + set_dec(DECREMENTER_MAX); local_irq_disable(); - set_dec(0x7fffffff); + set_dec(DECREMENTER_MAX); } static void generic_suspend_enable_irqs(void) @@ -824,9 +806,8 @@ void update_vsyscall(struct timespec *wall_time, struct timespec *wtm, ++vdso_data->tb_update_count; smp_mb(); - /* XXX this assumes clock->shift == 22 */ - /* 4611686018 ~= 2^(20+64-22) / 1e9 */ - new_tb_to_xs = (u64) mult * 4611686018ULL; + /* 19342813113834067 ~= 2^(20+64) / 1e9 */ + new_tb_to_xs = (u64) mult * (19342813113834067ULL >> clock->shift); new_stamp_xsec = (u64) wall_time->tv_nsec * XSEC_PER_SEC; do_div(new_stamp_xsec, 1000000000); new_stamp_xsec += (u64) wall_time->tv_sec * XSEC_PER_SEC; @@ -877,9 +858,7 @@ static void __init clocksource_init(void) else clock = &clocksource_timebase; - clock->mult = clocksource_hz2mult(tb_ticks_per_sec, clock->shift); - - if (clocksource_register(clock)) { + if (clocksource_register_hz(clock, tb_ticks_per_sec)) { printk(KERN_ERR "clocksource: %s is already registered\n", clock->name); return; @@ -892,7 +871,7 @@ static void __init clocksource_init(void) static int decrementer_set_next_event(unsigned long evt, struct clock_event_device *dev) { - __get_cpu_var(decrementers).next_tb = get_tb_or_rtc() + evt; + __get_cpu_var(decrementers_next_tb) = get_tb_or_rtc() + evt; set_dec(evt); return 0; } @@ -904,34 +883,9 @@ static void decrementer_set_mode(enum clock_event_mode mode, decrementer_set_next_event(DECREMENTER_MAX, dev); } -static inline uint64_t div_sc64(unsigned long ticks, unsigned long nsec, - int shift) -{ - uint64_t tmp = ((uint64_t)ticks) << shift; - - do_div(tmp, nsec); - return tmp; -} - -static void __init setup_clockevent_multiplier(unsigned long hz) -{ - u64 mult, shift = 32; - - while (1) { - mult = div_sc64(hz, NSEC_PER_SEC, shift); - if (mult && (mult >> 32UL) == 0UL) - break; - - shift--; - } - - decrementer_clockevent.shift = shift; - decrementer_clockevent.mult = mult; -} - static void register_decrementer_clockevent(int cpu) { - struct clock_event_device *dec = &per_cpu(decrementers, cpu).event; + struct clock_event_device *dec = &per_cpu(decrementers, cpu); *dec = decrementer_clockevent; dec->cpumask = cpumask_of(cpu); @@ -946,7 +900,8 @@ static void __init init_decrementer_clockevent(void) { int cpu = smp_processor_id(); - setup_clockevent_multiplier(ppc_tb_freq); + clockevents_calc_mult_shift(&decrementer_clockevent, ppc_tb_freq, 4); + decrementer_clockevent.max_delta_ns = clockevent_delta2ns(DECREMENTER_MAX, &decrementer_clockevent); decrementer_clockevent.min_delta_ns = @@ -1014,10 +969,10 @@ void __init time_init(void) boot_tb = get_tb_or_rtc(); /* If platform provided a timezone (pmac), we correct the time */ - if (timezone_offset) { + if (timezone_offset) { sys_tz.tz_minuteswest = -timezone_offset / 60; sys_tz.tz_dsttime = 0; - } + } vdso_data->tb_update_count = 0; vdso_data->tb_ticks_per_sec = tb_ticks_per_sec; diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 5459d148a0f6..c091527efd89 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -98,18 +98,14 @@ static void pmac_backlight_unblank(void) static inline void pmac_backlight_unblank(void) { } #endif -int die(const char *str, struct pt_regs *regs, long err) +static arch_spinlock_t die_lock = __ARCH_SPIN_LOCK_UNLOCKED; +static int die_owner = -1; +static unsigned int die_nest_count; +static int die_counter; + +static unsigned __kprobes long oops_begin(struct pt_regs *regs) { - static struct { - raw_spinlock_t lock; - u32 lock_owner; - int lock_owner_depth; - } die = { - .lock = __RAW_SPIN_LOCK_UNLOCKED(die.lock), - .lock_owner = -1, - .lock_owner_depth = 0 - }; - static int die_counter; + int cpu; unsigned long flags; if (debugger(regs)) @@ -117,66 +113,109 @@ int die(const char *str, struct pt_regs *regs, long err) oops_enter(); - if (die.lock_owner != raw_smp_processor_id()) { - console_verbose(); - raw_spin_lock_irqsave(&die.lock, flags); - die.lock_owner = smp_processor_id(); - die.lock_owner_depth = 0; - bust_spinlocks(1); - if (machine_is(powermac)) - pmac_backlight_unblank(); - } else { - local_save_flags(flags); + /* racy, but better than risking deadlock. */ + raw_local_irq_save(flags); + cpu = smp_processor_id(); + if (!arch_spin_trylock(&die_lock)) { + if (cpu == die_owner) + /* nested oops. should stop eventually */; + else + arch_spin_lock(&die_lock); } + die_nest_count++; + die_owner = cpu; + console_verbose(); + bust_spinlocks(1); + if (machine_is(powermac)) + pmac_backlight_unblank(); + return flags; +} - if (++die.lock_owner_depth < 3) { - printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter); -#ifdef CONFIG_PREEMPT - printk("PREEMPT "); -#endif -#ifdef CONFIG_SMP - printk("SMP NR_CPUS=%d ", NR_CPUS); -#endif -#ifdef CONFIG_DEBUG_PAGEALLOC - printk("DEBUG_PAGEALLOC "); -#endif -#ifdef CONFIG_NUMA - printk("NUMA "); -#endif - printk("%s\n", ppc_md.name ? ppc_md.name : ""); +static void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, + int signr) +{ + bust_spinlocks(0); + die_owner = -1; + add_taint(TAINT_DIE); + die_nest_count--; + oops_exit(); + printk("\n"); + if (!die_nest_count) + /* Nest count reaches zero, release the lock. */ + arch_spin_unlock(&die_lock); + raw_local_irq_restore(flags); - if (notify_die(DIE_OOPS, str, regs, err, 255, - SIGSEGV) == NOTIFY_STOP) - return 1; + /* + * A system reset (0x100) is a request to dump, so we always send + * it through the crashdump code. + */ + if (kexec_should_crash(current) || (TRAP(regs) == 0x100)) { + crash_kexec(regs); - print_modules(); - show_regs(regs); - } else { - printk("Recursive die() failure, output suppressed\n"); + /* + * We aren't the primary crash CPU. We need to send it + * to a holding pattern to avoid it ending up in the panic + * code. + */ + crash_kexec_secondary(regs); } - bust_spinlocks(0); - die.lock_owner = -1; - add_taint(TAINT_DIE); - raw_spin_unlock_irqrestore(&die.lock, flags); + if (!signr) + return; - if (kexec_should_crash(current) || - kexec_sr_activated(smp_processor_id())) - crash_kexec(regs); - crash_kexec_secondary(regs); + /* + * While our oops output is serialised by a spinlock, output + * from panic() called below can race and corrupt it. If we + * know we are going to panic, delay for 1 second so we have a + * chance to get clean backtraces from all CPUs that are oopsing. + */ + if (in_interrupt() || panic_on_oops || !current->pid || + is_global_init(current)) { + mdelay(MSEC_PER_SEC); + } if (in_interrupt()) panic("Fatal exception in interrupt"); - if (panic_on_oops) panic("Fatal exception"); + do_exit(signr); +} - oops_exit(); - do_exit(err); +static int __kprobes __die(const char *str, struct pt_regs *regs, long err) +{ + printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter); +#ifdef CONFIG_PREEMPT + printk("PREEMPT "); +#endif +#ifdef CONFIG_SMP + printk("SMP NR_CPUS=%d ", NR_CPUS); +#endif +#ifdef CONFIG_DEBUG_PAGEALLOC + printk("DEBUG_PAGEALLOC "); +#endif +#ifdef CONFIG_NUMA + printk("NUMA "); +#endif + printk("%s\n", ppc_md.name ? ppc_md.name : ""); + + if (notify_die(DIE_OOPS, str, regs, err, 255, SIGSEGV) == NOTIFY_STOP) + return 1; + + print_modules(); + show_regs(regs); return 0; } +void die(const char *str, struct pt_regs *regs, long err) +{ + unsigned long flags = oops_begin(regs); + + if (__die(str, regs, err)) + err = 0; + oops_end(flags, regs, err); +} + void user_single_step_siginfo(struct task_struct *tsk, struct pt_regs *regs, siginfo_t *info) { @@ -195,10 +234,11 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) "at %016lx nip %016lx lr %016lx code %x\n"; if (!user_mode(regs)) { - if (die("Exception in kernel mode", regs, signr)) - return; - } else if (show_unhandled_signals && - unhandled_signal(current, signr)) { + die("Exception in kernel mode", regs, signr); + return; + } + + if (show_unhandled_signals && unhandled_signal(current, signr)) { printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32, current->comm, current->pid, signr, addr, regs->nip, regs->link, code); @@ -220,25 +260,8 @@ void system_reset_exception(struct pt_regs *regs) return; } -#ifdef CONFIG_KEXEC - cpumask_set_cpu(smp_processor_id(), &cpus_in_sr); -#endif - die("System Reset", regs, SIGABRT); - /* - * Some CPUs when released from the debugger will execute this path. - * These CPUs entered the debugger via a soft-reset. If the CPU was - * hung before entering the debugger it will return to the hung - * state when exiting this function. This causes a problem in - * kdump since the hung CPU(s) will not respond to the IPI sent - * from kdump. To prevent the problem we call crash_kexec_secondary() - * here. If a kdump had not been initiated or we exit the debugger - * with the "exit and recover" command (x) crash_kexec_secondary() - * will return after 5ms and the CPU returns to its previous state. - */ - crash_kexec_secondary(regs); - /* Must die if the interrupt is not recoverable */ if (!(regs->msr & MSR_RI)) panic("Unrecoverable System Reset"); diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index f65af61996bd..8b086299ba25 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -1406,7 +1406,6 @@ static struct bus_type vio_bus_type = { .match = vio_bus_match, .probe = vio_bus_probe, .remove = vio_bus_remove, - .pm = GENERIC_SUBSYS_PM_OPS, }; /** diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 920276c0f6a1..710a54005dfb 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -170,7 +170,13 @@ SECTIONS } #ifdef CONFIG_RELOCATABLE . = ALIGN(8); - .dynsym : AT(ADDR(.dynsym) - LOAD_OFFSET) { *(.dynsym) } + .dynsym : AT(ADDR(.dynsym) - LOAD_OFFSET) + { +#ifdef CONFIG_RELOCATABLE_PPC32 + __dynamic_symtab = .; +#endif + *(.dynsym) + } .dynstr : AT(ADDR(.dynstr) - LOAD_OFFSET) { *(.dynstr) } .dynamic : AT(ADDR(.dynamic) - LOAD_OFFSET) { diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c index a459479995c6..e41ac6f7dcf1 100644 --- a/arch/powerpc/kvm/book3s.c +++ b/arch/powerpc/kvm/book3s.c @@ -498,7 +498,7 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, /* If nothing is dirty, don't bother messing with page tables. */ if (is_dirty) { - memslot = &kvm->memslots->memslots[log->slot]; + memslot = id_to_memslot(kvm->memslots, log->slot); ga = memslot->base_gfn << PAGE_SHIFT; ga_end = ga + (memslot->npages << PAGE_SHIFT); diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 0cb137a9b038..336983da9e72 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -538,7 +538,7 @@ static void kvmppc_start_thread(struct kvm_vcpu *vcpu) tpaca->kvm_hstate.napping = 0; vcpu->cpu = vc->pcpu; smp_wmb(); -#ifdef CONFIG_PPC_ICP_NATIVE +#if defined(CONFIG_PPC_ICP_NATIVE) && defined(CONFIG_SMP) if (vcpu->arch.ptid) { tpaca->cpu_start = 0x80; wmb(); diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c index 286f13d601cf..a795a13f4a70 100644 --- a/arch/powerpc/kvm/book3s_hv_builtin.c +++ b/arch/powerpc/kvm/book3s_hv_builtin.c @@ -86,7 +86,7 @@ static inline int lpcr_rmls(unsigned long rma_size) * to allocate contiguous physical memory for the real memory * areas for guests. */ -void kvm_rma_init(void) +void __init kvm_rma_init(void) { unsigned long i; unsigned long j, npages; diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 44d8829334ab..5c8b26183f50 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -112,6 +112,9 @@ kvm_start_guest: stbcix r0, r5, r6 /* clear it */ stwcix r8, r5, r7 /* EOI it */ + /* NV GPR values from power7_idle() will no longer be valid */ + stb r0, PACA_NAPSTATELOST(r13) + .global kvmppc_hv_entry kvmppc_hv_entry: diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c index 3c791e1eb675..e2cfb9e1e20e 100644 --- a/arch/powerpc/kvm/book3s_pr.c +++ b/arch/powerpc/kvm/book3s_pr.c @@ -658,10 +658,12 @@ program_interrupt: ulong cmd = kvmppc_get_gpr(vcpu, 3); int i; +#ifdef CONFIG_KVM_BOOK3S_64_PR if (kvmppc_h_pr(vcpu, cmd) == EMULATE_DONE) { r = RESUME_GUEST; break; } +#endif run->papr_hcall.nr = cmd; for (i = 0; i < 9; ++i) { diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c index 26d20903f2bc..8c0d45a6faf7 100644 --- a/arch/powerpc/kvm/e500.c +++ b/arch/powerpc/kvm/e500.c @@ -15,6 +15,7 @@ #include <linux/kvm_host.h> #include <linux/slab.h> #include <linux/err.h> +#include <linux/export.h> #include <asm/reg.h> #include <asm/cputable.h> diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 166a6a0ad544..7735a2c2e6d9 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -16,13 +16,15 @@ obj-$(CONFIG_HAS_IOMEM) += devres.o obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \ memcpy_64.o usercopy_64.o mem_64.o string.o \ - checksum_wrappers_64.o hweight_64.o + checksum_wrappers_64.o hweight_64.o \ + copyuser_power7.o obj-$(CONFIG_XMON) += sstep.o ldstfp.o obj-$(CONFIG_KPROBES) += sstep.o ldstfp.o obj-$(CONFIG_HAVE_HW_BREAKPOINT) += sstep.o ldstfp.o ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_SMP) += locks.o +obj-$(CONFIG_ALTIVEC) += copyuser_power7_vmx.o endif obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S index 578b625d6a3c..773d38f90aaa 100644 --- a/arch/powerpc/lib/copyuser_64.S +++ b/arch/powerpc/lib/copyuser_64.S @@ -11,6 +11,12 @@ .align 7 _GLOBAL(__copy_tofrom_user) +BEGIN_FTR_SECTION + nop +FTR_SECTION_ELSE + b __copy_tofrom_user_power7 +ALT_FTR_SECTION_END_IFCLR(CPU_FTR_VMX_COPY) +_GLOBAL(__copy_tofrom_user_base) /* first check for a whole page copy on a page boundary */ cmpldi cr1,r5,16 cmpdi cr6,r5,4096 diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S new file mode 100644 index 000000000000..497db7b23bb1 --- /dev/null +++ b/arch/powerpc/lib/copyuser_power7.S @@ -0,0 +1,683 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2011 + * + * Author: Anton Blanchard <anton@au.ibm.com> + */ +#include <asm/ppc_asm.h> + +#define STACKFRAMESIZE 256 +#define STK_REG(i) (112 + ((i)-14)*8) + + .macro err1 +100: + .section __ex_table,"a" + .align 3 + .llong 100b,.Ldo_err1 + .previous + .endm + + .macro err2 +200: + .section __ex_table,"a" + .align 3 + .llong 200b,.Ldo_err2 + .previous + .endm + +#ifdef CONFIG_ALTIVEC + .macro err3 +300: + .section __ex_table,"a" + .align 3 + .llong 300b,.Ldo_err3 + .previous + .endm + + .macro err4 +400: + .section __ex_table,"a" + .align 3 + .llong 400b,.Ldo_err4 + .previous + .endm + + +.Ldo_err4: + ld r16,STK_REG(r16)(r1) + ld r15,STK_REG(r15)(r1) + ld r14,STK_REG(r14)(r1) +.Ldo_err3: + bl .exit_vmx_copy + ld r0,STACKFRAMESIZE+16(r1) + mtlr r0 + b .Lexit +#endif /* CONFIG_ALTIVEC */ + +.Ldo_err2: + ld r22,STK_REG(r22)(r1) + ld r21,STK_REG(r21)(r1) + ld r20,STK_REG(r20)(r1) + ld r19,STK_REG(r19)(r1) + ld r18,STK_REG(r18)(r1) + ld r17,STK_REG(r17)(r1) + ld r16,STK_REG(r16)(r1) + ld r15,STK_REG(r15)(r1) + ld r14,STK_REG(r14)(r1) +.Lexit: + addi r1,r1,STACKFRAMESIZE +.Ldo_err1: + ld r3,48(r1) + ld r4,56(r1) + ld r5,64(r1) + b __copy_tofrom_user_base + + +_GLOBAL(__copy_tofrom_user_power7) +#ifdef CONFIG_ALTIVEC + cmpldi r5,16 + cmpldi cr1,r5,4096 + + std r3,48(r1) + std r4,56(r1) + std r5,64(r1) + + blt .Lshort_copy + bgt cr1,.Lvmx_copy +#else + cmpldi r5,16 + + std r3,48(r1) + std r4,56(r1) + std r5,64(r1) + + blt .Lshort_copy +#endif + +.Lnonvmx_copy: + /* Get the source 8B aligned */ + neg r6,r4 + mtocrf 0x01,r6 + clrldi r6,r6,(64-3) + + bf cr7*4+3,1f +err1; lbz r0,0(r4) + addi r4,r4,1 +err1; stb r0,0(r3) + addi r3,r3,1 + +1: bf cr7*4+2,2f +err1; lhz r0,0(r4) + addi r4,r4,2 +err1; sth r0,0(r3) + addi r3,r3,2 + +2: bf cr7*4+1,3f +err1; lwz r0,0(r4) + addi r4,r4,4 +err1; stw r0,0(r3) + addi r3,r3,4 + +3: sub r5,r5,r6 + cmpldi r5,128 + blt 5f + + mflr r0 + stdu r1,-STACKFRAMESIZE(r1) + std r14,STK_REG(r14)(r1) + std r15,STK_REG(r15)(r1) + std r16,STK_REG(r16)(r1) + std r17,STK_REG(r17)(r1) + std r18,STK_REG(r18)(r1) + std r19,STK_REG(r19)(r1) + std r20,STK_REG(r20)(r1) + std r21,STK_REG(r21)(r1) + std r22,STK_REG(r22)(r1) + std r0,STACKFRAMESIZE+16(r1) + + srdi r6,r5,7 + mtctr r6 + + /* Now do cacheline (128B) sized loads and stores. */ + .align 5 +4: +err2; ld r0,0(r4) +err2; ld r6,8(r4) +err2; ld r7,16(r4) +err2; ld r8,24(r4) +err2; ld r9,32(r4) +err2; ld r10,40(r4) +err2; ld r11,48(r4) +err2; ld r12,56(r4) +err2; ld r14,64(r4) +err2; ld r15,72(r4) +err2; ld r16,80(r4) +err2; ld r17,88(r4) +err2; ld r18,96(r4) +err2; ld r19,104(r4) +err2; ld r20,112(r4) +err2; ld r21,120(r4) + addi r4,r4,128 +err2; std r0,0(r3) +err2; std r6,8(r3) +err2; std r7,16(r3) +err2; std r8,24(r3) +err2; std r9,32(r3) +err2; std r10,40(r3) +err2; std r11,48(r3) +err2; std r12,56(r3) +err2; std r14,64(r3) +err2; std r15,72(r3) +err2; std r16,80(r3) +err2; std r17,88(r3) +err2; std r18,96(r3) +err2; std r19,104(r3) +err2; std r20,112(r3) +err2; std r21,120(r3) + addi r3,r3,128 + bdnz 4b + + clrldi r5,r5,(64-7) + + ld r14,STK_REG(r14)(r1) + ld r15,STK_REG(r15)(r1) + ld r16,STK_REG(r16)(r1) + ld r17,STK_REG(r17)(r1) + ld r18,STK_REG(r18)(r1) + ld r19,STK_REG(r19)(r1) + ld r20,STK_REG(r20)(r1) + ld r21,STK_REG(r21)(r1) + ld r22,STK_REG(r22)(r1) + addi r1,r1,STACKFRAMESIZE + + /* Up to 127B to go */ +5: srdi r6,r5,4 + mtocrf 0x01,r6 + +6: bf cr7*4+1,7f +err1; ld r0,0(r4) +err1; ld r6,8(r4) +err1; ld r7,16(r4) +err1; ld r8,24(r4) +err1; ld r9,32(r4) +err1; ld r10,40(r4) +err1; ld r11,48(r4) +err1; ld r12,56(r4) + addi r4,r4,64 +err1; std r0,0(r3) +err1; std r6,8(r3) +err1; std r7,16(r3) +err1; std r8,24(r3) +err1; std r9,32(r3) +err1; std r10,40(r3) +err1; std r11,48(r3) +err1; std r12,56(r3) + addi r3,r3,64 + + /* Up to 63B to go */ +7: bf cr7*4+2,8f +err1; ld r0,0(r4) +err1; ld r6,8(r4) +err1; ld r7,16(r4) +err1; ld r8,24(r4) + addi r4,r4,32 +err1; std r0,0(r3) +err1; std r6,8(r3) +err1; std r7,16(r3) +err1; std r8,24(r3) + addi r3,r3,32 + + /* Up to 31B to go */ +8: bf cr7*4+3,9f +err1; ld r0,0(r4) +err1; ld r6,8(r4) + addi r4,r4,16 +err1; std r0,0(r3) +err1; std r6,8(r3) + addi r3,r3,16 + +9: clrldi r5,r5,(64-4) + + /* Up to 15B to go */ +.Lshort_copy: + mtocrf 0x01,r5 + bf cr7*4+0,12f +err1; lwz r0,0(r4) /* Less chance of a reject with word ops */ +err1; lwz r6,4(r4) + addi r4,r4,8 +err1; stw r0,0(r3) +err1; stw r6,4(r3) + addi r3,r3,8 + +12: bf cr7*4+1,13f +err1; lwz r0,0(r4) + addi r4,r4,4 +err1; stw r0,0(r3) + addi r3,r3,4 + +13: bf cr7*4+2,14f +err1; lhz r0,0(r4) + addi r4,r4,2 +err1; sth r0,0(r3) + addi r3,r3,2 + +14: bf cr7*4+3,15f +err1; lbz r0,0(r4) +err1; stb r0,0(r3) + +15: li r3,0 + blr + +.Lunwind_stack_nonvmx_copy: + addi r1,r1,STACKFRAMESIZE + b .Lnonvmx_copy + +#ifdef CONFIG_ALTIVEC +.Lvmx_copy: + mflr r0 + std r0,16(r1) + stdu r1,-STACKFRAMESIZE(r1) + bl .enter_vmx_copy + cmpwi r3,0 + ld r0,STACKFRAMESIZE+16(r1) + ld r3,STACKFRAMESIZE+48(r1) + ld r4,STACKFRAMESIZE+56(r1) + ld r5,STACKFRAMESIZE+64(r1) + mtlr r0 + + beq .Lunwind_stack_nonvmx_copy + + /* + * If source and destination are not relatively aligned we use a + * slower permute loop. + */ + xor r6,r4,r3 + rldicl. r6,r6,0,(64-4) + bne .Lvmx_unaligned_copy + + /* Get the destination 16B aligned */ + neg r6,r3 + mtocrf 0x01,r6 + clrldi r6,r6,(64-4) + + bf cr7*4+3,1f +err3; lbz r0,0(r4) + addi r4,r4,1 +err3; stb r0,0(r3) + addi r3,r3,1 + +1: bf cr7*4+2,2f +err3; lhz r0,0(r4) + addi r4,r4,2 +err3; sth r0,0(r3) + addi r3,r3,2 + +2: bf cr7*4+1,3f +err3; lwz r0,0(r4) + addi r4,r4,4 +err3; stw r0,0(r3) + addi r3,r3,4 + +3: bf cr7*4+0,4f +err3; ld r0,0(r4) + addi r4,r4,8 +err3; std r0,0(r3) + addi r3,r3,8 + +4: sub r5,r5,r6 + + /* Get the desination 128B aligned */ + neg r6,r3 + srdi r7,r6,4 + mtocrf 0x01,r7 + clrldi r6,r6,(64-7) + + li r9,16 + li r10,32 + li r11,48 + + bf cr7*4+3,5f +err3; lvx vr1,r0,r4 + addi r4,r4,16 +err3; stvx vr1,r0,r3 + addi r3,r3,16 + +5: bf cr7*4+2,6f +err3; lvx vr1,r0,r4 +err3; lvx vr0,r4,r9 + addi r4,r4,32 +err3; stvx vr1,r0,r3 +err3; stvx vr0,r3,r9 + addi r3,r3,32 + +6: bf cr7*4+1,7f +err3; lvx vr3,r0,r4 +err3; lvx vr2,r4,r9 +err3; lvx vr1,r4,r10 +err3; lvx vr0,r4,r11 + addi r4,r4,64 +err3; stvx vr3,r0,r3 +err3; stvx vr2,r3,r9 +err3; stvx vr1,r3,r10 +err3; stvx vr0,r3,r11 + addi r3,r3,64 + +7: sub r5,r5,r6 + srdi r6,r5,7 + + std r14,STK_REG(r14)(r1) + std r15,STK_REG(r15)(r1) + std r16,STK_REG(r16)(r1) + + li r12,64 + li r14,80 + li r15,96 + li r16,112 + + mtctr r6 + + /* + * Now do cacheline sized loads and stores. By this stage the + * cacheline stores are also cacheline aligned. + */ + .align 5 +8: +err4; lvx vr7,r0,r4 +err4; lvx vr6,r4,r9 +err4; lvx vr5,r4,r10 +err4; lvx vr4,r4,r11 +err4; lvx vr3,r4,r12 +err4; lvx vr2,r4,r14 +err4; lvx vr1,r4,r15 +err4; lvx vr0,r4,r16 + addi r4,r4,128 +err4; stvx vr7,r0,r3 +err4; stvx vr6,r3,r9 +err4; stvx vr5,r3,r10 +err4; stvx vr4,r3,r11 +err4; stvx vr3,r3,r12 +err4; stvx vr2,r3,r14 +err4; stvx vr1,r3,r15 +err4; stvx vr0,r3,r16 + addi r3,r3,128 + bdnz 8b + + ld r14,STK_REG(r14)(r1) + ld r15,STK_REG(r15)(r1) + ld r16,STK_REG(r16)(r1) + + /* Up to 127B to go */ + clrldi r5,r5,(64-7) + srdi r6,r5,4 + mtocrf 0x01,r6 + + bf cr7*4+1,9f +err3; lvx vr3,r0,r4 +err3; lvx vr2,r4,r9 +err3; lvx vr1,r4,r10 +err3; lvx vr0,r4,r11 + addi r4,r4,64 +err3; stvx vr3,r0,r3 +err3; stvx vr2,r3,r9 +err3; stvx vr1,r3,r10 +err3; stvx vr0,r3,r11 + addi r3,r3,64 + +9: bf cr7*4+2,10f +err3; lvx vr1,r0,r4 +err3; lvx vr0,r4,r9 + addi r4,r4,32 +err3; stvx vr1,r0,r3 +err3; stvx vr0,r3,r9 + addi r3,r3,32 + +10: bf cr7*4+3,11f +err3; lvx vr1,r0,r4 + addi r4,r4,16 +err3; stvx vr1,r0,r3 + addi r3,r3,16 + + /* Up to 15B to go */ +11: clrldi r5,r5,(64-4) + mtocrf 0x01,r5 + bf cr7*4+0,12f +err3; ld r0,0(r4) + addi r4,r4,8 +err3; std r0,0(r3) + addi r3,r3,8 + +12: bf cr7*4+1,13f +err3; lwz r0,0(r4) + addi r4,r4,4 +err3; stw r0,0(r3) + addi r3,r3,4 + +13: bf cr7*4+2,14f +err3; lhz r0,0(r4) + addi r4,r4,2 +err3; sth r0,0(r3) + addi r3,r3,2 + +14: bf cr7*4+3,15f +err3; lbz r0,0(r4) +err3; stb r0,0(r3) + +15: addi r1,r1,STACKFRAMESIZE + b .exit_vmx_copy /* tail call optimise */ + +.Lvmx_unaligned_copy: + /* Get the destination 16B aligned */ + neg r6,r3 + mtocrf 0x01,r6 + clrldi r6,r6,(64-4) + + bf cr7*4+3,1f +err3; lbz r0,0(r4) + addi r4,r4,1 +err3; stb r0,0(r3) + addi r3,r3,1 + +1: bf cr7*4+2,2f +err3; lhz r0,0(r4) + addi r4,r4,2 +err3; sth r0,0(r3) + addi r3,r3,2 + +2: bf cr7*4+1,3f +err3; lwz r0,0(r4) + addi r4,r4,4 +err3; stw r0,0(r3) + addi r3,r3,4 + +3: bf cr7*4+0,4f +err3; lwz r0,0(r4) /* Less chance of a reject with word ops */ +err3; lwz r7,4(r4) + addi r4,r4,8 +err3; stw r0,0(r3) +err3; stw r7,4(r3) + addi r3,r3,8 + +4: sub r5,r5,r6 + + /* Get the desination 128B aligned */ + neg r6,r3 + srdi r7,r6,4 + mtocrf 0x01,r7 + clrldi r6,r6,(64-7) + + li r9,16 + li r10,32 + li r11,48 + + lvsl vr16,0,r4 /* Setup permute control vector */ +err3; lvx vr0,0,r4 + addi r4,r4,16 + + bf cr7*4+3,5f +err3; lvx vr1,r0,r4 + vperm vr8,vr0,vr1,vr16 + addi r4,r4,16 +err3; stvx vr8,r0,r3 + addi r3,r3,16 + vor vr0,vr1,vr1 + +5: bf cr7*4+2,6f +err3; lvx vr1,r0,r4 + vperm vr8,vr0,vr1,vr16 +err3; lvx vr0,r4,r9 + vperm vr9,vr1,vr0,vr16 + addi r4,r4,32 +err3; stvx vr8,r0,r3 +err3; stvx vr9,r3,r9 + addi r3,r3,32 + +6: bf cr7*4+1,7f +err3; lvx vr3,r0,r4 + vperm vr8,vr0,vr3,vr16 +err3; lvx vr2,r4,r9 + vperm vr9,vr3,vr2,vr16 +err3; lvx vr1,r4,r10 + vperm vr10,vr2,vr1,vr16 +err3; lvx vr0,r4,r11 + vperm vr11,vr1,vr0,vr16 + addi r4,r4,64 +err3; stvx vr8,r0,r3 +err3; stvx vr9,r3,r9 +err3; stvx vr10,r3,r10 +err3; stvx vr11,r3,r11 + addi r3,r3,64 + +7: sub r5,r5,r6 + srdi r6,r5,7 + + std r14,STK_REG(r14)(r1) + std r15,STK_REG(r15)(r1) + std r16,STK_REG(r16)(r1) + + li r12,64 + li r14,80 + li r15,96 + li r16,112 + + mtctr r6 + + /* + * Now do cacheline sized loads and stores. By this stage the + * cacheline stores are also cacheline aligned. + */ + .align 5 +8: +err4; lvx vr7,r0,r4 + vperm vr8,vr0,vr7,vr16 +err4; lvx vr6,r4,r9 + vperm vr9,vr7,vr6,vr16 +err4; lvx vr5,r4,r10 + vperm vr10,vr6,vr5,vr16 +err4; lvx vr4,r4,r11 + vperm vr11,vr5,vr4,vr16 +err4; lvx vr3,r4,r12 + vperm vr12,vr4,vr3,vr16 +err4; lvx vr2,r4,r14 + vperm vr13,vr3,vr2,vr16 +err4; lvx vr1,r4,r15 + vperm vr14,vr2,vr1,vr16 +err4; lvx vr0,r4,r16 + vperm vr15,vr1,vr0,vr16 + addi r4,r4,128 +err4; stvx vr8,r0,r3 +err4; stvx vr9,r3,r9 +err4; stvx vr10,r3,r10 +err4; stvx vr11,r3,r11 +err4; stvx vr12,r3,r12 +err4; stvx vr13,r3,r14 +err4; stvx vr14,r3,r15 +err4; stvx vr15,r3,r16 + addi r3,r3,128 + bdnz 8b + + ld r14,STK_REG(r14)(r1) + ld r15,STK_REG(r15)(r1) + ld r16,STK_REG(r16)(r1) + + /* Up to 127B to go */ + clrldi r5,r5,(64-7) + srdi r6,r5,4 + mtocrf 0x01,r6 + + bf cr7*4+1,9f +err3; lvx vr3,r0,r4 + vperm vr8,vr0,vr3,vr16 +err3; lvx vr2,r4,r9 + vperm vr9,vr3,vr2,vr16 +err3; lvx vr1,r4,r10 + vperm vr10,vr2,vr1,vr16 +err3; lvx vr0,r4,r11 + vperm vr11,vr1,vr0,vr16 + addi r4,r4,64 +err3; stvx vr8,r0,r3 +err3; stvx vr9,r3,r9 +err3; stvx vr10,r3,r10 +err3; stvx vr11,r3,r11 + addi r3,r3,64 + +9: bf cr7*4+2,10f +err3; lvx vr1,r0,r4 + vperm vr8,vr0,vr1,vr16 +err3; lvx vr0,r4,r9 + vperm vr9,vr1,vr0,vr16 + addi r4,r4,32 +err3; stvx vr8,r0,r3 +err3; stvx vr9,r3,r9 + addi r3,r3,32 + +10: bf cr7*4+3,11f +err3; lvx vr1,r0,r4 + vperm vr8,vr0,vr1,vr16 + addi r4,r4,16 +err3; stvx vr8,r0,r3 + addi r3,r3,16 + + /* Up to 15B to go */ +11: clrldi r5,r5,(64-4) + addi r4,r4,-16 /* Unwind the +16 load offset */ + mtocrf 0x01,r5 + bf cr7*4+0,12f +err3; lwz r0,0(r4) /* Less chance of a reject with word ops */ +err3; lwz r6,4(r4) + addi r4,r4,8 +err3; stw r0,0(r3) +err3; stw r6,4(r3) + addi r3,r3,8 + +12: bf cr7*4+1,13f +err3; lwz r0,0(r4) + addi r4,r4,4 +err3; stw r0,0(r3) + addi r3,r3,4 + +13: bf cr7*4+2,14f +err3; lhz r0,0(r4) + addi r4,r4,2 +err3; sth r0,0(r3) + addi r3,r3,2 + +14: bf cr7*4+3,15f +err3; lbz r0,0(r4) +err3; stb r0,0(r3) + +15: addi r1,r1,STACKFRAMESIZE + b .exit_vmx_copy /* tail call optimise */ +#endif /* CONFiG_ALTIVEC */ diff --git a/arch/powerpc/lib/copyuser_power7_vmx.c b/arch/powerpc/lib/copyuser_power7_vmx.c new file mode 100644 index 000000000000..6e1efadac48b --- /dev/null +++ b/arch/powerpc/lib/copyuser_power7_vmx.c @@ -0,0 +1,50 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2011 + * + * Authors: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> + * Anton Blanchard <anton@au.ibm.com> + */ +#include <linux/uaccess.h> +#include <linux/hardirq.h> + +int enter_vmx_copy(void) +{ + if (in_interrupt()) + return 0; + + /* This acts as preempt_disable() as well and will make + * enable_kernel_altivec(). We need to disable page faults + * as they can call schedule and thus make us lose the VMX + * context. So on page faults, we just fail which will cause + * a fallback to the normal non-vmx copy. + */ + pagefault_disable(); + + enable_kernel_altivec(); + + return 1; +} + +/* + * This function must return 0 because we tail call optimise when calling + * from __copy_tofrom_user_power7 which returns 0 on success. + */ +int exit_vmx_copy(void) +{ + pagefault_enable(); + return 0; +} diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c index f60e006d90c3..388b95e1a009 100644 --- a/arch/powerpc/mm/44x_mmu.c +++ b/arch/powerpc/mm/44x_mmu.c @@ -78,11 +78,7 @@ static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys) "tlbwe %1,%3,%5\n" "tlbwe %0,%3,%6\n" : -#ifdef CONFIG_PPC47x - : "r" (PPC47x_TLB2_S_RWX), -#else : "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G), -#endif "r" (phys), "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M), "r" (entry), @@ -221,7 +217,7 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base, { u64 size; -#ifndef CONFIG_RELOCATABLE +#ifndef CONFIG_NONSTATIC_KERNEL /* We don't currently support the first MEMBLOCK not mapping 0 * physical on those processors */ diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 991ee813d2a8..3787b61f7d20 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -21,6 +21,8 @@ obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \ tlb_hash$(CONFIG_WORD_SIZE).o \ mmu_context_hash$(CONFIG_WORD_SIZE).o +obj-$(CONFIG_PPC_ICSWX) += icswx.o +obj-$(CONFIG_PPC_ICSWX_PID) += icswx_pid.o obj-$(CONFIG_40x) += 40x_mmu.o obj-$(CONFIG_44x) += 44x_mmu.o obj-$(CONFIG_PPC_FSL_BOOK3E) += fsl_booke_mmu.o diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 5efe8c96d37f..2f0d1b032a89 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -44,6 +44,8 @@ #include <asm/siginfo.h> #include <mm/mmu_decl.h> +#include "icswx.h" + #ifdef CONFIG_KPROBES static inline int notify_page_fault(struct pt_regs *regs) { @@ -143,6 +145,21 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, is_write = error_code & ESR_DST; #endif /* CONFIG_4xx || CONFIG_BOOKE */ +#ifdef CONFIG_PPC_ICSWX + /* + * we need to do this early because this "data storage + * interrupt" does not update the DAR/DEAR so we don't want to + * look at it + */ + if (error_code & ICSWX_DSI_UCT) { + int ret; + + ret = acop_handle_fault(regs, address, error_code); + if (ret) + return ret; + } +#endif + if (notify_page_fault(regs)) return 0; diff --git a/arch/powerpc/mm/hugetlbpage-book3e.c b/arch/powerpc/mm/hugetlbpage-book3e.c index 343ad0b87261..3bc700655fc8 100644 --- a/arch/powerpc/mm/hugetlbpage-book3e.c +++ b/arch/powerpc/mm/hugetlbpage-book3e.c @@ -37,31 +37,32 @@ static inline int book3e_tlb_exists(unsigned long ea, unsigned long pid) return found; } -void book3e_hugetlb_preload(struct mm_struct *mm, unsigned long ea, pte_t pte) +void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea, + pte_t pte) { unsigned long mas1, mas2; u64 mas7_3; unsigned long psize, tsize, shift; unsigned long flags; + struct mm_struct *mm; #ifdef CONFIG_PPC_FSL_BOOK3E - int index, lz, ncams; - struct vm_area_struct *vma; + int index, ncams; #endif if (unlikely(is_kernel_addr(ea))) return; + mm = vma->vm_mm; + #ifdef CONFIG_PPC_MM_SLICES - psize = mmu_get_tsize(get_slice_psize(mm, ea)); - tsize = mmu_get_psize(psize); + psize = get_slice_psize(mm, ea); + tsize = mmu_get_tsize(psize); shift = mmu_psize_defs[psize].shift; #else - vma = find_vma(mm, ea); - psize = vma_mmu_pagesize(vma); /* returns actual size in bytes */ - asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (psize)); - shift = 31 - lz; - tsize = 21 - lz; + psize = vma_mmu_pagesize(vma); + shift = __ilog2(psize); + tsize = shift - 10; #endif /* diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 8558b572e55d..a8b3cc7d90fe 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -29,22 +29,22 @@ unsigned int HPAGE_SHIFT; /* * Tracks gpages after the device tree is scanned and before the - * huge_boot_pages list is ready. On 64-bit implementations, this is - * just used to track 16G pages and so is a single array. 32-bit - * implementations may have more than one gpage size due to limitations - * of the memory allocators, so we need multiple arrays + * huge_boot_pages list is ready. On non-Freescale implementations, this is + * just used to track 16G pages and so is a single array. FSL-based + * implementations may have more than one gpage size, so we need multiple + * arrays */ -#ifdef CONFIG_PPC64 -#define MAX_NUMBER_GPAGES 1024 -static u64 gpage_freearray[MAX_NUMBER_GPAGES]; -static unsigned nr_gpages; -#else +#ifdef CONFIG_PPC_FSL_BOOK3E #define MAX_NUMBER_GPAGES 128 struct psize_gpages { u64 gpage_list[MAX_NUMBER_GPAGES]; unsigned int nr_gpages; }; static struct psize_gpages gpage_freearray[MMU_PAGE_COUNT]; +#else +#define MAX_NUMBER_GPAGES 1024 +static u64 gpage_freearray[MAX_NUMBER_GPAGES]; +static unsigned nr_gpages; #endif static inline int shift_to_mmu_psize(unsigned int shift) @@ -115,12 +115,12 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, struct kmem_cache *cachep; pte_t *new; -#ifdef CONFIG_PPC64 - cachep = PGT_CACHE(pdshift - pshift); -#else +#ifdef CONFIG_PPC_FSL_BOOK3E int i; int num_hugepd = 1 << (pshift - pdshift); cachep = hugepte_cache; +#else + cachep = PGT_CACHE(pdshift - pshift); #endif new = kmem_cache_zalloc(cachep, GFP_KERNEL|__GFP_REPEAT); @@ -132,12 +132,7 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, return -ENOMEM; spin_lock(&mm->page_table_lock); -#ifdef CONFIG_PPC64 - if (!hugepd_none(*hpdp)) - kmem_cache_free(cachep, new); - else - hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift; -#else +#ifdef CONFIG_PPC_FSL_BOOK3E /* * We have multiple higher-level entries that point to the same * actual pte location. Fill in each as we go and backtrack on error. @@ -156,11 +151,28 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, hpdp->pd = 0; kmem_cache_free(cachep, new); } +#else + if (!hugepd_none(*hpdp)) + kmem_cache_free(cachep, new); + else + hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift; #endif spin_unlock(&mm->page_table_lock); return 0; } +/* + * These macros define how to determine which level of the page table holds + * the hpdp. + */ +#ifdef CONFIG_PPC_FSL_BOOK3E +#define HUGEPD_PGD_SHIFT PGDIR_SHIFT +#define HUGEPD_PUD_SHIFT PUD_SHIFT +#else +#define HUGEPD_PGD_SHIFT PUD_SHIFT +#define HUGEPD_PUD_SHIFT PMD_SHIFT +#endif + pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz) { pgd_t *pg; @@ -173,12 +185,13 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz addr &= ~(sz-1); pg = pgd_offset(mm, addr); - if (pshift >= PUD_SHIFT) { + + if (pshift >= HUGEPD_PGD_SHIFT) { hpdp = (hugepd_t *)pg; } else { pdshift = PUD_SHIFT; pu = pud_alloc(mm, pg, addr); - if (pshift >= PMD_SHIFT) { + if (pshift >= HUGEPD_PUD_SHIFT) { hpdp = (hugepd_t *)pu; } else { pdshift = PMD_SHIFT; @@ -198,7 +211,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz return hugepte_offset(hpdp, addr, pdshift); } -#ifdef CONFIG_PPC32 +#ifdef CONFIG_PPC_FSL_BOOK3E /* Build list of addresses of gigantic pages. This function is used in early * boot before the buddy or bootmem allocator is setup. */ @@ -318,7 +331,7 @@ void __init reserve_hugetlb_gpages(void) } } -#else /* PPC64 */ +#else /* !PPC_FSL_BOOK3E */ /* Build list of addresses of gigantic pages. This function is used in early * boot before the buddy or bootmem allocator is setup. @@ -356,7 +369,7 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep) return 0; } -#ifdef CONFIG_PPC32 +#ifdef CONFIG_PPC_FSL_BOOK3E #define HUGEPD_FREELIST_SIZE \ ((PAGE_SIZE - sizeof(struct hugepd_freelist)) / sizeof(pte_t)) @@ -416,11 +429,11 @@ static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshif unsigned long pdmask = ~((1UL << pdshift) - 1); unsigned int num_hugepd = 1; -#ifdef CONFIG_PPC64 - unsigned int shift = hugepd_shift(*hpdp); -#else - /* Note: On 32-bit the hpdp may be the first of several */ +#ifdef CONFIG_PPC_FSL_BOOK3E + /* Note: On fsl the hpdp may be the first of several */ num_hugepd = (1 << (hugepd_shift(*hpdp) - pdshift)); +#else + unsigned int shift = hugepd_shift(*hpdp); #endif start &= pdmask; @@ -438,10 +451,11 @@ static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshif hpdp->pd = 0; tlb->need_flush = 1; -#ifdef CONFIG_PPC64 - pgtable_free_tlb(tlb, hugepte, pdshift - shift); -#else + +#ifdef CONFIG_PPC_FSL_BOOK3E hugepd_free(tlb, hugepte); +#else + pgtable_free_tlb(tlb, hugepte, pdshift - shift); #endif } @@ -454,14 +468,23 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud, unsigned long start; start = addr; - pmd = pmd_offset(pud, addr); do { + pmd = pmd_offset(pud, addr); next = pmd_addr_end(addr, end); if (pmd_none(*pmd)) continue; +#ifdef CONFIG_PPC_FSL_BOOK3E + /* + * Increment next by the size of the huge mapping since + * there may be more than one entry at this level for a + * single hugepage, but all of them point to + * the same kmem cache that holds the hugepte. + */ + next = addr + (1 << hugepd_shift(*(hugepd_t *)pmd)); +#endif free_hugepd_range(tlb, (hugepd_t *)pmd, PMD_SHIFT, addr, next, floor, ceiling); - } while (pmd++, addr = next, addr != end); + } while (addr = next, addr != end); start &= PUD_MASK; if (start < floor) @@ -488,8 +511,8 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd, unsigned long start; start = addr; - pud = pud_offset(pgd, addr); do { + pud = pud_offset(pgd, addr); next = pud_addr_end(addr, end); if (!is_hugepd(pud)) { if (pud_none_or_clear_bad(pud)) @@ -497,10 +520,19 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd, hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling); } else { +#ifdef CONFIG_PPC_FSL_BOOK3E + /* + * Increment next by the size of the huge mapping since + * there may be more than one entry at this level for a + * single hugepage, but all of them point to + * the same kmem cache that holds the hugepte. + */ + next = addr + (1 << hugepd_shift(*(hugepd_t *)pud)); +#endif free_hugepd_range(tlb, (hugepd_t *)pud, PUD_SHIFT, addr, next, floor, ceiling); } - } while (pud++, addr = next, addr != end); + } while (addr = next, addr != end); start &= PGDIR_MASK; if (start < floor) @@ -555,12 +587,12 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb, continue; hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling); } else { -#ifdef CONFIG_PPC32 +#ifdef CONFIG_PPC_FSL_BOOK3E /* * Increment next by the size of the huge mapping since - * on 32-bit there may be more than one entry at the pgd - * level for a single hugepage, but all of them point to - * the same kmem cache that holds the hugepte. + * there may be more than one entry at the pgd level + * for a single hugepage, but all of them point to the + * same kmem cache that holds the hugepte. */ next = addr + (1 << hugepd_shift(*(hugepd_t *)pgd)); #endif @@ -698,19 +730,17 @@ int gup_hugepd(hugepd_t *hugepd, unsigned pdshift, return 1; } +#ifdef CONFIG_PPC_MM_SLICES unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags) { -#ifdef CONFIG_PPC_MM_SLICES struct hstate *hstate = hstate_file(file); int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate)); return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0); -#else - return get_unmapped_area(file, addr, len, pgoff, flags); -#endif } +#endif unsigned long vma_mmu_pagesize(struct vm_area_struct *vma) { @@ -784,7 +814,7 @@ static int __init hugepage_setup_sz(char *str) } __setup("hugepagesz=", hugepage_setup_sz); -#ifdef CONFIG_FSL_BOOKE +#ifdef CONFIG_PPC_FSL_BOOK3E struct kmem_cache *hugepte_cache; static int __init hugetlbpage_init(void) { diff --git a/arch/powerpc/mm/icswx.c b/arch/powerpc/mm/icswx.c new file mode 100644 index 000000000000..5d9a59eaad93 --- /dev/null +++ b/arch/powerpc/mm/icswx.c @@ -0,0 +1,273 @@ +/* + * ICSWX and ACOP Management + * + * Copyright (C) 2011 Anton Blanchard, IBM Corp. <anton@samba.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/spinlock.h> +#include <linux/module.h> +#include <linux/uaccess.h> + +#include "icswx.h" + +/* + * The processor and its L2 cache cause the icswx instruction to + * generate a COP_REQ transaction on PowerBus. The transaction has no + * address, and the processor does not perform an MMU access to + * authenticate the transaction. The command portion of the PowerBus + * COP_REQ transaction includes the LPAR_ID (LPID) and the coprocessor + * Process ID (PID), which the coprocessor compares to the authorized + * LPID and PID held in the coprocessor, to determine if the process + * is authorized to generate the transaction. The data of the COP_REQ + * transaction is 128-byte or less in size and is placed in cacheable + * memory on a 128-byte cache line boundary. + * + * The task to use a coprocessor should use use_cop() to mark the use + * of the Coprocessor Type (CT) and context switching. On a server + * class processor, the PID register is used only for coprocessor + * management + * and so a coprocessor PID is allocated before + * executing icswx + * instruction. Drop_cop() is used to free the + * coprocessor PID. + * + * Example: + * Host Fabric Interface (HFI) is a PowerPC network coprocessor. + * Each HFI have multiple windows. Each HFI window serves as a + * network device sending to and receiving from HFI network. + * HFI immediate send function uses icswx instruction. The immediate + * send function allows small (single cache-line) packets be sent + * without using the regular HFI send FIFO and doorbell, which are + * much slower than immediate send. + * + * For each task intending to use HFI immediate send, the HFI driver + * calls use_cop() to obtain a coprocessor PID for the task. + * The HFI driver then allocate a free HFI window and save the + * coprocessor PID to the HFI window to allow the task to use the + * HFI window. + * + * The HFI driver repeatedly creates immediate send packets and + * issues icswx instruction to send data through the HFI window. + * The HFI compares the coprocessor PID in the CPU PID register + * to the PID held in the HFI window to determine if the transaction + * is allowed. + * + * When the task to release the HFI window, the HFI driver calls + * drop_cop() to release the coprocessor PID. + */ + +void switch_cop(struct mm_struct *next) +{ +#ifdef CONFIG_ICSWX_PID + mtspr(SPRN_PID, next->context.cop_pid); +#endif + mtspr(SPRN_ACOP, next->context.acop); +} + +/** + * Start using a coprocessor. + * @acop: mask of coprocessor to be used. + * @mm: The mm the coprocessor to associate with. Most likely current mm. + * + * Return a positive PID if successful. Negative errno otherwise. + * The returned PID will be fed to the coprocessor to determine if an + * icswx transaction is authenticated. + */ +int use_cop(unsigned long acop, struct mm_struct *mm) +{ + int ret; + + if (!cpu_has_feature(CPU_FTR_ICSWX)) + return -ENODEV; + + if (!mm || !acop) + return -EINVAL; + + /* The page_table_lock ensures mm_users won't change under us */ + spin_lock(&mm->page_table_lock); + spin_lock(mm->context.cop_lockp); + + ret = get_cop_pid(mm); + if (ret < 0) + goto out; + + /* update acop */ + mm->context.acop |= acop; + + sync_cop(mm); + + /* + * If this is a threaded process then there might be other threads + * running. We need to send an IPI to force them to pick up any + * change in PID and ACOP. + */ + if (atomic_read(&mm->mm_users) > 1) + smp_call_function(sync_cop, mm, 1); + +out: + spin_unlock(mm->context.cop_lockp); + spin_unlock(&mm->page_table_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(use_cop); + +/** + * Stop using a coprocessor. + * @acop: mask of coprocessor to be stopped. + * @mm: The mm the coprocessor associated with. + */ +void drop_cop(unsigned long acop, struct mm_struct *mm) +{ + int free_pid; + + if (!cpu_has_feature(CPU_FTR_ICSWX)) + return; + + if (WARN_ON_ONCE(!mm)) + return; + + /* The page_table_lock ensures mm_users won't change under us */ + spin_lock(&mm->page_table_lock); + spin_lock(mm->context.cop_lockp); + + mm->context.acop &= ~acop; + + free_pid = disable_cop_pid(mm); + sync_cop(mm); + + /* + * If this is a threaded process then there might be other threads + * running. We need to send an IPI to force them to pick up any + * change in PID and ACOP. + */ + if (atomic_read(&mm->mm_users) > 1) + smp_call_function(sync_cop, mm, 1); + + if (free_pid != COP_PID_NONE) + free_cop_pid(free_pid); + + spin_unlock(mm->context.cop_lockp); + spin_unlock(&mm->page_table_lock); +} +EXPORT_SYMBOL_GPL(drop_cop); + +static int acop_use_cop(int ct) +{ + /* todo */ + return -1; +} + +/* + * Get the instruction word at the NIP + */ +static u32 acop_get_inst(struct pt_regs *regs) +{ + u32 inst; + u32 __user *p; + + p = (u32 __user *)regs->nip; + if (!access_ok(VERIFY_READ, p, sizeof(*p))) + return 0; + + if (__get_user(inst, p)) + return 0; + + return inst; +} + +/** + * @regs: regsiters at time of interrupt + * @address: storage address + * @error_code: Fault code, usually the DSISR or ESR depending on + * processor type + * + * Return 0 if we are able to resolve the data storage fault that + * results from a CT miss in the ACOP register. + */ +int acop_handle_fault(struct pt_regs *regs, unsigned long address, + unsigned long error_code) +{ + int ct; + u32 inst = 0; + + if (!cpu_has_feature(CPU_FTR_ICSWX)) { + pr_info("No coprocessors available"); + _exception(SIGILL, regs, ILL_ILLOPN, address); + } + + if (!user_mode(regs)) { + /* this could happen if the HV denies the + * kernel access, for now we just die */ + die("ICSWX from kernel failed", regs, SIGSEGV); + } + + /* Some implementations leave us a hint for the CT */ + ct = ICSWX_GET_CT_HINT(error_code); + if (ct < 0) { + /* we have to peek at the instruction word to figure out CT */ + u32 ccw; + u32 rs; + + inst = acop_get_inst(regs); + if (inst == 0) + return -1; + + rs = (inst >> (31 - 10)) & 0x1f; + ccw = regs->gpr[rs]; + ct = (ccw >> 16) & 0x3f; + } + + if (!acop_use_cop(ct)) + return 0; + + /* at this point the CT is unknown to the system */ + pr_warn("%s[%d]: Coprocessor %d is unavailable", + current->comm, current->pid, ct); + + /* get inst if we don't already have it */ + if (inst == 0) { + inst = acop_get_inst(regs); + if (inst == 0) + return -1; + } + + /* Check if the instruction is the "record form" */ + if (inst & 1) { + /* + * the instruction is "record" form so we can reject + * using CR0 + */ + regs->ccr &= ~(0xful << 28); + regs->ccr |= ICSWX_RC_NOT_FOUND << 28; + + /* Move on to the next instruction */ + regs->nip += 4; + } else { + /* + * There is no architected mechanism to report a bad + * CT so we could either SIGILL or report nothing. + * Since the non-record version should only bu used + * for "hints" or "don't care" we should probably do + * nothing. However, I could see how some people + * might want an SIGILL so it here if you want it. + */ +#ifdef CONFIG_PPC_ICSWX_USE_SIGILL + _exception(SIGILL, regs, ILL_ILLOPN, address); +#else + regs->nip += 4; +#endif + } + + return 0; +} +EXPORT_SYMBOL_GPL(acop_handle_fault); diff --git a/arch/powerpc/mm/icswx.h b/arch/powerpc/mm/icswx.h new file mode 100644 index 000000000000..42176bd0884c --- /dev/null +++ b/arch/powerpc/mm/icswx.h @@ -0,0 +1,62 @@ +#ifndef _ARCH_POWERPC_MM_ICSWX_H_ +#define _ARCH_POWERPC_MM_ICSWX_H_ + +/* + * ICSWX and ACOP Management + * + * Copyright (C) 2011 Anton Blanchard, IBM Corp. <anton@samba.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <asm/mmu_context.h> + +/* also used to denote that PIDs are not used */ +#define COP_PID_NONE 0 + +static inline void sync_cop(void *arg) +{ + struct mm_struct *mm = arg; + + if (mm == current->active_mm) + switch_cop(current->active_mm); +} + +#ifdef CONFIG_PPC_ICSWX_PID +extern int get_cop_pid(struct mm_struct *mm); +extern int disable_cop_pid(struct mm_struct *mm); +extern void free_cop_pid(int free_pid); +#else +#define get_cop_pid(m) (COP_PID_NONE) +#define disable_cop_pid(m) (COP_PID_NONE) +#define free_cop_pid(p) +#endif + +/* + * These are implementation bits for architected registers. If this + * ever becomes architecture the should be moved to reg.h et. al. + */ +/* UCT is the same bit for Server and Embedded */ +#define ICSWX_DSI_UCT 0x00004000 /* Unavailable Coprocessor Type */ + +#ifdef CONFIG_PPC_BOOK3E +/* Embedded implementation gives us no hints as to what the CT is */ +#define ICSWX_GET_CT_HINT(x) (-1) +#else +/* Server implementation contains the CT value in the DSISR */ +#define ICSWX_DSISR_CTMASK 0x00003f00 +#define ICSWX_GET_CT_HINT(x) (((x) & ICSWX_DSISR_CTMASK) >> 8) +#endif + +#define ICSWX_RC_STARTED 0x8 /* The request has been started */ +#define ICSWX_RC_NOT_IDLE 0x4 /* No coprocessor found idle */ +#define ICSWX_RC_NOT_FOUND 0x2 /* No coprocessor found */ +#define ICSWX_RC_UNDEFINED 0x1 /* Reserved */ + +extern int acop_handle_fault(struct pt_regs *regs, unsigned long address, + unsigned long error_code); +#endif /* !_ARCH_POWERPC_MM_ICSWX_H_ */ diff --git a/arch/powerpc/mm/icswx_pid.c b/arch/powerpc/mm/icswx_pid.c new file mode 100644 index 000000000000..91e30eb7d054 --- /dev/null +++ b/arch/powerpc/mm/icswx_pid.c @@ -0,0 +1,87 @@ +/* + * ICSWX and ACOP/PID Management + * + * Copyright (C) 2011 Anton Blanchard, IBM Corp. <anton@samba.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/spinlock.h> +#include <linux/idr.h> +#include <linux/module.h> +#include "icswx.h" + +#define COP_PID_MIN (COP_PID_NONE + 1) +#define COP_PID_MAX (0xFFFF) + +static DEFINE_SPINLOCK(mmu_context_acop_lock); +static DEFINE_IDA(cop_ida); + +static int new_cop_pid(struct ida *ida, int min_id, int max_id, + spinlock_t *lock) +{ + int index; + int err; + +again: + if (!ida_pre_get(ida, GFP_KERNEL)) + return -ENOMEM; + + spin_lock(lock); + err = ida_get_new_above(ida, min_id, &index); + spin_unlock(lock); + + if (err == -EAGAIN) + goto again; + else if (err) + return err; + + if (index > max_id) { + spin_lock(lock); + ida_remove(ida, index); + spin_unlock(lock); + return -ENOMEM; + } + + return index; +} + +int get_cop_pid(struct mm_struct *mm) +{ + int pid; + + if (mm->context.cop_pid == COP_PID_NONE) { + pid = new_cop_pid(&cop_ida, COP_PID_MIN, COP_PID_MAX, + &mmu_context_acop_lock); + if (pid >= 0) + mm->context.cop_pid = pid; + } + return mm->context.cop_pid; +} + +int disable_cop_pid(struct mm_struct *mm) +{ + int free_pid = COP_PID_NONE; + + if ((!mm->context.acop) && (mm->context.cop_pid != COP_PID_NONE)) { + free_pid = mm->context.cop_pid; + mm->context.cop_pid = COP_PID_NONE; + } + return free_pid; +} + +void free_cop_pid(int free_pid) +{ + spin_lock(&mmu_context_acop_lock); + ida_remove(&cop_ida, free_pid); + spin_unlock(&mmu_context_acop_lock); +} diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 161cefde5c15..6157be2a7049 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -65,6 +65,13 @@ phys_addr_t memstart_addr = (phys_addr_t)~0ull; EXPORT_SYMBOL(memstart_addr); phys_addr_t kernstart_addr; EXPORT_SYMBOL(kernstart_addr); + +#ifdef CONFIG_RELOCATABLE_PPC32 +/* Used in __va()/__pa() */ +long long virt_phys_offset; +EXPORT_SYMBOL(virt_phys_offset); +#endif + phys_addr_t lowmem_end_addr; int boot_mapsize; @@ -134,8 +141,7 @@ void __init MMU_init(void) if (memblock.memory.cnt > 1) { #ifndef CONFIG_WII - memblock.memory.cnt = 1; - memblock_analyze(); + memblock_enforce_memory_limit(memblock.memory.regions[0].size); printk(KERN_WARNING "Only using first contiguous memory region"); #else wii_memory_fixups(); @@ -158,7 +164,6 @@ void __init MMU_init(void) #ifndef CONFIG_HIGHMEM total_memory = total_lowmem; memblock_enforce_memory_limit(total_lowmem); - memblock_analyze(); #endif /* CONFIG_HIGHMEM */ } diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 2dd6bdd31fe1..d974b79a3068 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -51,6 +51,7 @@ #include <asm/vdso.h> #include <asm/fixmap.h> #include <asm/swiotlb.h> +#include <asm/rtas.h> #include "mmu_decl.h" @@ -199,7 +200,7 @@ void __init do_init_bootmem(void) unsigned long start_pfn, end_pfn; start_pfn = memblock_region_memory_base_pfn(reg); end_pfn = memblock_region_memory_end_pfn(reg); - add_active_range(0, start_pfn, end_pfn); + memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0); } /* Add all physical memory to the bootmem map, mark each area @@ -553,7 +554,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, #if (defined(CONFIG_PPC_BOOK3E_64) || defined(CONFIG_PPC_FSL_BOOK3E)) \ && defined(CONFIG_HUGETLB_PAGE) if (is_vm_hugetlb_page(vma)) - book3e_hugetlb_preload(vma->vm_mm, address, *ptep); + book3e_hugetlb_preload(vma, address, *ptep); #endif } @@ -585,3 +586,23 @@ static int add_system_ram_resources(void) return 0; } subsys_initcall(add_system_ram_resources); + +#ifdef CONFIG_STRICT_DEVMEM +/* + * devmem_is_allowed(): check to see if /dev/mem access to a certain address + * is valid. The argument is a physical page number. + * + * Access has to be given to non-kernel-ram areas as well, these contain the + * PCI mmio resources as well as potential bios/acpi data regions. + */ +int devmem_is_allowed(unsigned long pfn) +{ + if (iomem_is_exclusive(pfn << PAGE_SHIFT)) + return 0; + if (!page_is_ram(pfn)) + return 1; + if (page_is_rtas_user_buf(pfn)) + return 1; + return 0; +} +#endif /* CONFIG_STRICT_DEVMEM */ diff --git a/arch/powerpc/mm/mmap_64.c b/arch/powerpc/mm/mmap_64.c index 5a783d8e8e8e..67a42ed0d2fc 100644 --- a/arch/powerpc/mm/mmap_64.c +++ b/arch/powerpc/mm/mmap_64.c @@ -53,14 +53,6 @@ static inline int mmap_is_legacy(void) return sysctl_legacy_va_layout; } -/* - * Since get_random_int() returns the same value within a 1 jiffy window, - * we will almost always get the same randomisation for the stack and mmap - * region. This will mean the relative distance between stack and mmap will - * be the same. - * - * To avoid this we can shift the randomness by 1 bit. - */ static unsigned long mmap_rnd(void) { unsigned long rnd = 0; @@ -68,11 +60,11 @@ static unsigned long mmap_rnd(void) if (current->flags & PF_RANDOMIZE) { /* 8MB for 32bit, 1GB for 64bit */ if (is_32bit_task()) - rnd = (long)(get_random_int() % (1<<(22-PAGE_SHIFT))); + rnd = (long)(get_random_int() % (1<<(23-PAGE_SHIFT))); else - rnd = (long)(get_random_int() % (1<<(29-PAGE_SHIFT))); + rnd = (long)(get_random_int() % (1<<(30-PAGE_SHIFT))); } - return (rnd << PAGE_SHIFT) * 2; + return rnd << PAGE_SHIFT; } static inline unsigned long mmap_base(void) diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c index ca988a3d5fb2..40677aa0190e 100644 --- a/arch/powerpc/mm/mmu_context_hash64.c +++ b/arch/powerpc/mm/mmu_context_hash64.c @@ -24,200 +24,7 @@ #include <asm/mmu_context.h> -#ifdef CONFIG_PPC_ICSWX -/* - * The processor and its L2 cache cause the icswx instruction to - * generate a COP_REQ transaction on PowerBus. The transaction has - * no address, and the processor does not perform an MMU access - * to authenticate the transaction. The command portion of the - * PowerBus COP_REQ transaction includes the LPAR_ID (LPID) and - * the coprocessor Process ID (PID), which the coprocessor compares - * to the authorized LPID and PID held in the coprocessor, to determine - * if the process is authorized to generate the transaction. - * The data of the COP_REQ transaction is 128-byte or less and is - * placed in cacheable memory on a 128-byte cache line boundary. - * - * The task to use a coprocessor should use use_cop() to allocate - * a coprocessor PID before executing icswx instruction. use_cop() - * also enables the coprocessor context switching. Drop_cop() is - * used to free the coprocessor PID. - * - * Example: - * Host Fabric Interface (HFI) is a PowerPC network coprocessor. - * Each HFI have multiple windows. Each HFI window serves as a - * network device sending to and receiving from HFI network. - * HFI immediate send function uses icswx instruction. The immediate - * send function allows small (single cache-line) packets be sent - * without using the regular HFI send FIFO and doorbell, which are - * much slower than immediate send. - * - * For each task intending to use HFI immediate send, the HFI driver - * calls use_cop() to obtain a coprocessor PID for the task. - * The HFI driver then allocate a free HFI window and save the - * coprocessor PID to the HFI window to allow the task to use the - * HFI window. - * - * The HFI driver repeatedly creates immediate send packets and - * issues icswx instruction to send data through the HFI window. - * The HFI compares the coprocessor PID in the CPU PID register - * to the PID held in the HFI window to determine if the transaction - * is allowed. - * - * When the task to release the HFI window, the HFI driver calls - * drop_cop() to release the coprocessor PID. - */ - -#define COP_PID_NONE 0 -#define COP_PID_MIN (COP_PID_NONE + 1) -#define COP_PID_MAX (0xFFFF) - -static DEFINE_SPINLOCK(mmu_context_acop_lock); -static DEFINE_IDA(cop_ida); - -void switch_cop(struct mm_struct *next) -{ - mtspr(SPRN_PID, next->context.cop_pid); - mtspr(SPRN_ACOP, next->context.acop); -} - -static int new_cop_pid(struct ida *ida, int min_id, int max_id, - spinlock_t *lock) -{ - int index; - int err; - -again: - if (!ida_pre_get(ida, GFP_KERNEL)) - return -ENOMEM; - - spin_lock(lock); - err = ida_get_new_above(ida, min_id, &index); - spin_unlock(lock); - - if (err == -EAGAIN) - goto again; - else if (err) - return err; - - if (index > max_id) { - spin_lock(lock); - ida_remove(ida, index); - spin_unlock(lock); - return -ENOMEM; - } - - return index; -} - -static void sync_cop(void *arg) -{ - struct mm_struct *mm = arg; - - if (mm == current->active_mm) - switch_cop(current->active_mm); -} - -/** - * Start using a coprocessor. - * @acop: mask of coprocessor to be used. - * @mm: The mm the coprocessor to associate with. Most likely current mm. - * - * Return a positive PID if successful. Negative errno otherwise. - * The returned PID will be fed to the coprocessor to determine if an - * icswx transaction is authenticated. - */ -int use_cop(unsigned long acop, struct mm_struct *mm) -{ - int ret; - - if (!cpu_has_feature(CPU_FTR_ICSWX)) - return -ENODEV; - - if (!mm || !acop) - return -EINVAL; - - /* The page_table_lock ensures mm_users won't change under us */ - spin_lock(&mm->page_table_lock); - spin_lock(mm->context.cop_lockp); - - if (mm->context.cop_pid == COP_PID_NONE) { - ret = new_cop_pid(&cop_ida, COP_PID_MIN, COP_PID_MAX, - &mmu_context_acop_lock); - if (ret < 0) - goto out; - - mm->context.cop_pid = ret; - } - mm->context.acop |= acop; - - sync_cop(mm); - - /* - * If this is a threaded process then there might be other threads - * running. We need to send an IPI to force them to pick up any - * change in PID and ACOP. - */ - if (atomic_read(&mm->mm_users) > 1) - smp_call_function(sync_cop, mm, 1); - - ret = mm->context.cop_pid; - -out: - spin_unlock(mm->context.cop_lockp); - spin_unlock(&mm->page_table_lock); - - return ret; -} -EXPORT_SYMBOL_GPL(use_cop); - -/** - * Stop using a coprocessor. - * @acop: mask of coprocessor to be stopped. - * @mm: The mm the coprocessor associated with. - */ -void drop_cop(unsigned long acop, struct mm_struct *mm) -{ - int free_pid = COP_PID_NONE; - - if (!cpu_has_feature(CPU_FTR_ICSWX)) - return; - - if (WARN_ON_ONCE(!mm)) - return; - - /* The page_table_lock ensures mm_users won't change under us */ - spin_lock(&mm->page_table_lock); - spin_lock(mm->context.cop_lockp); - - mm->context.acop &= ~acop; - - if ((!mm->context.acop) && (mm->context.cop_pid != COP_PID_NONE)) { - free_pid = mm->context.cop_pid; - mm->context.cop_pid = COP_PID_NONE; - } - - sync_cop(mm); - - /* - * If this is a threaded process then there might be other threads - * running. We need to send an IPI to force them to pick up any - * change in PID and ACOP. - */ - if (atomic_read(&mm->mm_users) > 1) - smp_call_function(sync_cop, mm, 1); - - if (free_pid != COP_PID_NONE) { - spin_lock(&mmu_context_acop_lock); - ida_remove(&cop_ida, free_pid); - spin_unlock(&mmu_context_acop_lock); - } - - spin_unlock(mm->context.cop_lockp); - spin_unlock(&mm->page_table_lock); -} -EXPORT_SYMBOL_GPL(drop_cop); - -#endif /* CONFIG_PPC_ICSWX */ +#include "icswx.h" static DEFINE_SPINLOCK(mmu_context_lock); static DEFINE_IDA(mmu_context_ida); diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index b22a83a91cb8..4ff3d8e411a7 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -127,45 +127,25 @@ static int __cpuinit fake_numa_create_new_node(unsigned long end_pfn, } /* - * get_active_region_work_fn - A helper function for get_node_active_region - * Returns datax set to the start_pfn and end_pfn if they contain - * the initial value of datax->start_pfn between them - * @start_pfn: start page(inclusive) of region to check - * @end_pfn: end page(exclusive) of region to check - * @datax: comes in with ->start_pfn set to value to search for and - * goes out with active range if it contains it - * Returns 1 if search value is in range else 0 - */ -static int __init get_active_region_work_fn(unsigned long start_pfn, - unsigned long end_pfn, void *datax) -{ - struct node_active_region *data; - data = (struct node_active_region *)datax; - - if (start_pfn <= data->start_pfn && end_pfn > data->start_pfn) { - data->start_pfn = start_pfn; - data->end_pfn = end_pfn; - return 1; - } - return 0; - -} - -/* - * get_node_active_region - Return active region containing start_pfn + * get_node_active_region - Return active region containing pfn * Active range returned is empty if none found. - * @start_pfn: The page to return the region for. - * @node_ar: Returned set to the active region containing start_pfn + * @pfn: The page to return the region for + * @node_ar: Returned set to the active region containing @pfn */ -static void __init get_node_active_region(unsigned long start_pfn, - struct node_active_region *node_ar) +static void __init get_node_active_region(unsigned long pfn, + struct node_active_region *node_ar) { - int nid = early_pfn_to_nid(start_pfn); + unsigned long start_pfn, end_pfn; + int i, nid; - node_ar->nid = nid; - node_ar->start_pfn = start_pfn; - node_ar->end_pfn = start_pfn; - work_with_active_regions(nid, get_active_region_work_fn, node_ar); + for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, &nid) { + if (pfn >= start_pfn && pfn < end_pfn) { + node_ar->nid = nid; + node_ar->start_pfn = start_pfn; + node_ar->end_pfn = end_pfn; + break; + } + } } static void map_cpu_to_node(int cpu, int node) @@ -406,7 +386,7 @@ static void __init get_n_mem_cells(int *n_addr_cells, int *n_size_cells) of_node_put(memory); } -static unsigned long __devinit read_n_cells(int n, const unsigned int **buf) +static unsigned long read_n_cells(int n, const unsigned int **buf) { unsigned long result = 0; @@ -521,7 +501,7 @@ static int of_get_assoc_arrays(struct device_node *memory, aa->n_arrays = *prop++; aa->array_sz = *prop++; - /* Now that we know the number of arrrays and size of each array, + /* Now that we know the number of arrays and size of each array, * revalidate the size of the property read in. */ if (len < (aa->n_arrays * aa->array_sz + 2) * sizeof(unsigned int)) @@ -710,9 +690,7 @@ static void __init parse_drconf_memory(struct device_node *memory) node_set_online(nid); sz = numa_enforce_memory_limit(base, size); if (sz) - add_active_range(nid, base >> PAGE_SHIFT, - (base >> PAGE_SHIFT) - + (sz >> PAGE_SHIFT)); + memblock_set_node(base, sz, nid); } while (--ranges); } } @@ -802,8 +780,7 @@ new_range: continue; } - add_active_range(nid, start >> PAGE_SHIFT, - (start >> PAGE_SHIFT) + (size >> PAGE_SHIFT)); + memblock_set_node(start, size, nid); if (--ranges) goto new_range; @@ -839,7 +816,8 @@ static void __init setup_nonnuma(void) end_pfn = memblock_region_memory_end_pfn(reg); fake_numa_create_new_node(end_pfn, &nid); - add_active_range(nid, start_pfn, end_pfn); + memblock_set_node(PFN_PHYS(start_pfn), + PFN_PHYS(end_pfn - start_pfn), nid); node_set_online(nid); } } @@ -969,7 +947,7 @@ static struct notifier_block __cpuinitdata ppc64_numa_nb = { .priority = 1 /* Must run before sched domains notifier. */ }; -static void mark_reserved_regions_for_nid(int nid) +static void __init mark_reserved_regions_for_nid(int nid) { struct pglist_data *node = NODE_DATA(nid); struct memblock_region *reg; @@ -1462,7 +1440,7 @@ int arch_update_cpu_topology(void) { int cpu, nid, old_nid; unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0}; - struct sys_device *sysdev; + struct device *dev; for_each_cpu(cpu,&cpu_associativity_changes_mask) { vphn_get_associativity(cpu, associativity); @@ -1483,9 +1461,9 @@ int arch_update_cpu_topology(void) register_cpu_under_node(cpu, nid); put_online_cpus(); - sysdev = get_cpu_sysdev(cpu); - if (sysdev) - kobject_uevent(&sysdev->kobj, KOBJ_CHANGE); + dev = get_cpu_device(cpu); + if (dev) + kobject_uevent(&dev->kobj, KOBJ_CHANGE); } return 1; diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S index dc4a5f385e41..ff672bd8fea9 100644 --- a/arch/powerpc/mm/tlb_low_64e.S +++ b/arch/powerpc/mm/tlb_low_64e.S @@ -94,11 +94,11 @@ srdi r15,r16,60 /* get region */ rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4 - bne- dtlb_miss_fault_bolted + bne- dtlb_miss_fault_bolted /* Bail if fault addr is invalid */ rlwinm r10,r11,32-19,27,27 rlwimi r10,r11,32-16,19,19 - cmpwi r15,0 + cmpwi r15,0 /* user vs kernel check */ ori r10,r10,_PAGE_PRESENT oris r11,r10,_PAGE_ACCESSED@h @@ -120,44 +120,38 @@ tlb_miss_common_bolted: rldicl r15,r16,64-PGDIR_SHIFT+3,64-PGD_INDEX_SIZE-3 cmpldi cr0,r14,0 clrrdi r15,r15,3 - beq tlb_miss_fault_bolted + beq tlb_miss_fault_bolted /* No PGDIR, bail */ BEGIN_MMU_FTR_SECTION /* Set the TLB reservation and search for existing entry. Then load * the entry. */ PPC_TLBSRX_DOT(0,r16) - ldx r14,r14,r15 - beq normal_tlb_miss_done + ldx r14,r14,r15 /* grab pgd entry */ + beq normal_tlb_miss_done /* tlb exists already, bail */ MMU_FTR_SECTION_ELSE - ldx r14,r14,r15 + ldx r14,r14,r15 /* grab pgd entry */ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV) #ifndef CONFIG_PPC_64K_PAGES rldicl r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3 clrrdi r15,r15,3 - - cmpldi cr0,r14,0 - beq tlb_miss_fault_bolted - - ldx r14,r14,r15 + cmpdi cr0,r14,0 + bge tlb_miss_fault_bolted /* Bad pgd entry or hugepage; bail */ + ldx r14,r14,r15 /* grab pud entry */ #endif /* CONFIG_PPC_64K_PAGES */ rldicl r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3 clrrdi r15,r15,3 - - cmpldi cr0,r14,0 - beq tlb_miss_fault_bolted - - ldx r14,r14,r15 + cmpdi cr0,r14,0 + bge tlb_miss_fault_bolted + ldx r14,r14,r15 /* Grab pmd entry */ rldicl r15,r16,64-PAGE_SHIFT+3,64-PTE_INDEX_SIZE-3 clrrdi r15,r15,3 - - cmpldi cr0,r14,0 - beq tlb_miss_fault_bolted - - ldx r14,r14,r15 + cmpdi cr0,r14,0 + bge tlb_miss_fault_bolted + ldx r14,r14,r15 /* Grab PTE, normal (!huge) page */ /* Check if required permissions are met */ andc. r15,r11,r14 diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 4e13d6f9023e..df32a838dcfa 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -52,7 +52,7 @@ * indirect page table entries. */ #ifdef CONFIG_PPC_BOOK3E_MMU -#ifdef CONFIG_FSL_BOOKE +#ifdef CONFIG_PPC_FSL_BOOK3E struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { [MMU_PAGE_4K] = { .shift = 12, @@ -615,7 +615,6 @@ static void __early_init_mmu(int boot_cpu) /* limit memory so we dont have linear faults */ memblock_enforce_memory_limit(linear_map_top); - memblock_analyze(); patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e); patch_exception(0x1e0, exc_instruction_tlb_miss_bolted_book3e); diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index 153022971daa..a392d12dd21f 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -1,19 +1,3 @@ -#config BUBINGA -# bool "Bubinga" -# depends on 40x -# default n -# select 405EP -# help -# This option enables support for the IBM 405EP evaluation board. - -#config CPCI405 -# bool "CPCI405" -# depends on 40x -# default n -# select 405GP -# help -# This option enables support for the CPCI405 board. - config ACADIA bool "Acadia" depends on 40x @@ -65,14 +49,6 @@ config MAKALU help This option enables support for the AMCC PPC405EX board. -#config SYCAMORE -# bool "Sycamore" -# depends on 40x -# default n -# select 405GPR -# help -# This option enables support for the IBM PPC405GPr evaluation board. - config WALNUT bool "Walnut" depends on 40x @@ -100,6 +76,16 @@ config XILINX_VIRTEX_GENERIC_BOARD Most Virtex designs should use this unless it needs to do some special configuration at board probe time. +config OBS600 + bool "OpenBlockS 600" + depends on 40x + default n + select 405EX + select PPC40x_SIMPLE + help + This option enables support for PlatHome OpenBlockS 600 server + + config PPC40x_SIMPLE bool "Simple PowerPC 40x board support" depends on 40x @@ -173,16 +159,11 @@ config IBM405_ERR77 config IBM405_ERR51 bool -#config BIOS_FIXUP -# bool -# depends on BUBINGA || EP405 || SYCAMORE || WALNUT -# default y - -#config PPC4xx_DMA -# bool "PPC4xx DMA controller support" -# depends on 4xx - -#config PPC4xx_EDMA -# bool -# depends on !STB03xxx && PPC4xx_DMA -# default y +config APM8018X + bool "APM8018X" + depends on 40x + default n + select PPC40x_SIMPLE + help + This option enables support for the AppliedMicro APM8018X evaluation + board. diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c index e8dd5c5df7d9..97612068fae3 100644 --- a/arch/powerpc/platforms/40x/ppc40x_simple.c +++ b/arch/powerpc/platforms/40x/ppc40x_simple.c @@ -55,7 +55,9 @@ static const char *board[] __initdata = { "amcc,haleakala", "amcc,kilauea", "amcc,makalu", - "est,hotfoot" + "apm,klondike", + "est,hotfoot", + "plathome,obs600" }; static int __init ppc40x_probe(void) diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 762322ce24a9..fcf6bf2ceee9 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -75,7 +75,7 @@ config KATMAI select PCI select PPC4xx_PCI_EXPRESS select PCI_MSI - select PCC4xx_MSI + select PPC4xx_MSI help This option enables support for the AMCC PPC440SPe evaluation board. @@ -186,6 +186,16 @@ config ISS4xx help This option enables support for the IBM ISS simulation environment +config CURRITUCK + bool "IBM Currituck (476fpe) Support" + depends on PPC_47x + default n + select SWIOTLB + select 476FPE + select PPC4xx_PCI_EXPRESS + help + This option enables support for the IBM Currituck (476fpe) evaluation board + config ICON bool "Icon" depends on 44x @@ -197,22 +207,6 @@ config ICON help This option enables support for the AMCC PPC440SPe evaluation board. -#config LUAN -# bool "Luan" -# depends on 44x -# default n -# select 440SP -# help -# This option enables support for the IBM PPC440SP evaluation board. - -#config OCOTEA -# bool "Ocotea" -# depends on 44x -# default n -# select 440GX -# help -# This option enables support for the IBM PPC440GX evaluation board. - config XILINX_VIRTEX440_GENERIC_BOARD bool "Generic Xilinx Virtex 5 FXT board support" depends on 44x @@ -308,6 +302,10 @@ config 460SX select IBM_EMAC_ZMII select IBM_EMAC_TAH +config 476FPE + bool + select PPC_FPU + config APM821xx bool select PPC_FPU diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 553db6007217..d03833abec09 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o obj-$(CONFIG_ISS4xx) += iss4xx.o obj-$(CONFIG_CANYONLANDS)+= canyonlands.o +obj-$(CONFIG_CURRITUCK) += currituck.o diff --git a/arch/powerpc/platforms/44x/currituck.c b/arch/powerpc/platforms/44x/currituck.c new file mode 100644 index 000000000000..3f6229b5dee0 --- /dev/null +++ b/arch/powerpc/platforms/44x/currituck.c @@ -0,0 +1,204 @@ +/* + * Currituck board specific routines + * + * Copyright © 2011 Tony Breeds IBM Corporation + * + * Based on earlier code: + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * Copyright (c) 2003-2005 Zultys Technologies + * + * Rewritten and ported to the merged powerpc tree: + * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation. + * Copyright © 2011 David Kliekamp IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/memblock.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/rtc.h> + +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/ppc4xx.h> +#include <asm/mpic.h> +#include <asm/mmu.h> + +#include <linux/pci.h> + +static __initdata struct of_device_id ppc47x_of_bus[] = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,plb6", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +/* The EEPROM is missing and the default values are bogus. This forces USB in + * to EHCI mode */ +static void __devinit quirk_ppc_currituck_usb_fixup(struct pci_dev *dev) +{ + if (of_machine_is_compatible("ibm,currituck")) { + pci_write_config_dword(dev, 0xe0, 0x0114231f); + pci_write_config_dword(dev, 0xe4, 0x00006c40); + } +} +DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup); + +static int __init ppc47x_device_probe(void) +{ + of_platform_bus_probe(NULL, ppc47x_of_bus, NULL); + + return 0; +} +machine_device_initcall(ppc47x, ppc47x_device_probe); + +/* We can have either UICs or MPICs */ +static void __init ppc47x_init_irq(void) +{ + struct device_node *np; + + /* Find top level interrupt controller */ + for_each_node_with_property(np, "interrupt-controller") { + if (of_get_property(np, "interrupts", NULL) == NULL) + break; + } + if (np == NULL) + panic("Can't find top level interrupt controller"); + + /* Check type and do appropriate initialization */ + if (of_device_is_compatible(np, "chrp,open-pic")) { + /* The MPIC driver will get everything it needs from the + * device-tree, just pass 0 to all arguments + */ + struct mpic *mpic = + mpic_alloc(np, 0, 0, 0, 0, " MPIC "); + BUG_ON(mpic == NULL); + mpic_init(mpic); + ppc_md.get_irq = mpic_get_irq; + } else + panic("Unrecognized top level interrupt controller"); +} + +#ifdef CONFIG_SMP +static void __cpuinit smp_ppc47x_setup_cpu(int cpu) +{ + mpic_setup_this_cpu(); +} + +static int __cpuinit smp_ppc47x_kick_cpu(int cpu) +{ + struct device_node *cpunode = of_get_cpu_node(cpu, NULL); + const u64 *spin_table_addr_prop; + u32 *spin_table; + extern void start_secondary_47x(void); + + BUG_ON(cpunode == NULL); + + /* Assume spin table. We could test for the enable-method in + * the device-tree but currently there's little point as it's + * our only supported method + */ + spin_table_addr_prop = + of_get_property(cpunode, "cpu-release-addr", NULL); + + if (spin_table_addr_prop == NULL) { + pr_err("CPU%d: Can't start, missing cpu-release-addr !\n", + cpu); + return 1; + } + + /* Assume it's mapped as part of the linear mapping. This is a bit + * fishy but will work fine for now + * + * XXX: Is there any reason to assume differently? + */ + spin_table = (u32 *)__va(*spin_table_addr_prop); + pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table); + + spin_table[3] = cpu; + smp_wmb(); + spin_table[1] = __pa(start_secondary_47x); + mb(); + + return 0; +} + +static struct smp_ops_t ppc47x_smp_ops = { + .probe = smp_mpic_probe, + .message_pass = smp_mpic_message_pass, + .setup_cpu = smp_ppc47x_setup_cpu, + .kick_cpu = smp_ppc47x_kick_cpu, + .give_timebase = smp_generic_give_timebase, + .take_timebase = smp_generic_take_timebase, +}; + +static void __init ppc47x_smp_init(void) +{ + if (mmu_has_feature(MMU_FTR_TYPE_47x)) + smp_ops = &ppc47x_smp_ops; +} + +#else /* CONFIG_SMP */ +static void __init ppc47x_smp_init(void) { } +#endif /* CONFIG_SMP */ + +static void __init ppc47x_setup_arch(void) +{ + + /* No need to check the DMA config as we /know/ our windows are all of + * RAM. Lets hope that doesn't change */ +#ifdef CONFIG_SWIOTLB + if (memblock_end_of_DRAM() > 0xffffffff) { + ppc_swiotlb_enable = 1; + set_pci_dma_ops(&swiotlb_dma_ops); + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; + } +#endif + ppc47x_smp_init(); +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init ppc47x_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "ibm,currituck")) + return 0; + + return 1; +} + +/* Use USB controller should have been hardware swizzled but it wasn't :( */ +static void ppc47x_pci_irq_fixup(struct pci_dev *dev) +{ + if (dev->vendor == 0x1033 && (dev->device == 0x0035 || + dev->device == 0x00e0)) { + dev->irq = irq_create_mapping(NULL, 47); + pr_info("%s: Mapping irq 47 %d\n", __func__, dev->irq); + } +} + +define_machine(ppc47x) { + .name = "PowerPC 47x", + .probe = ppc47x_probe, + .progress = udbg_progress, + .init_IRQ = ppc47x_init_irq, + .setup_arch = ppc47x_setup_arch, + .pci_irq_fixup = ppc47x_pci_irq_fixup, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/44x/iss4xx.c b/arch/powerpc/platforms/44x/iss4xx.c index 19395f18b1db..5b8cdbb82f80 100644 --- a/arch/powerpc/platforms/44x/iss4xx.c +++ b/arch/powerpc/platforms/44x/iss4xx.c @@ -71,7 +71,7 @@ static void __init iss4xx_init_irq(void) /* The MPIC driver will get everything it needs from the * device-tree, just pass 0 to all arguments */ - struct mpic *mpic = mpic_alloc(np, 0, MPIC_PRIMARY, 0, 0, + struct mpic *mpic = mpic_alloc(np, 0, 0, 0, 0, " MPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index b3ebce1aec07..c16999802ecf 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig @@ -12,7 +12,6 @@ config MPC5121_ADS bool "Freescale MPC5121E ADS" depends on PPC_MPC512x select DEFAULT_UIMAGE - select MPC5121_ADS_CPLD help This option enables support for the MPC5121E ADS board. diff --git a/arch/powerpc/platforms/83xx/asp834x.c b/arch/powerpc/platforms/83xx/asp834x.c index aa0d84d22585..464ea8e0292d 100644 --- a/arch/powerpc/platforms/83xx/asp834x.c +++ b/arch/powerpc/platforms/83xx/asp834x.c @@ -36,38 +36,7 @@ static void __init asp834x_setup_arch(void) mpc834x_usb_cfg(); } -static void __init asp834x_init_IRQ(void) -{ - struct device_node *np; - - np = of_find_node_by_type(NULL, "ipic"); - if (!np) - return; - - ipic_init(np, 0); - - of_node_put(np); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); -} - -static struct __initdata of_device_id asp8347_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - {}, -}; - -static int __init asp8347_declare_of_platform_devices(void) -{ - of_platform_bus_probe(NULL, asp8347_ids, NULL); - return 0; -} -machine_device_initcall(asp834x, asp8347_declare_of_platform_devices); +machine_device_initcall(asp834x, mpc83xx_declare_of_platform_devices); /* * Called very early, MMU is off, device-tree isn't unflattened @@ -82,7 +51,7 @@ define_machine(asp834x) { .name = "ASP8347E", .probe = asp834x_probe, .setup_arch = asp834x_setup_arch, - .init_IRQ = asp834x_init_IRQ, + .init_IRQ = mpc83xx_ipic_init_IRQ, .get_irq = ipic_get_irq, .restart = mpc83xx_restart, .time_init = mpc83xx_time_init, diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c index c55129f5760a..65eb792a0d00 100644 --- a/arch/powerpc/platforms/83xx/km83xx.c +++ b/arch/powerpc/platforms/83xx/km83xx.c @@ -51,15 +51,14 @@ */ static void __init mpc83xx_km_setup_arch(void) { +#ifdef CONFIG_QUICC_ENGINE struct device_node *np; +#endif if (ppc_md.progress) ppc_md.progress("kmpbec83xx_setup_arch()", 0); -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") - mpc83xx_add_bridge(np); -#endif + mpc83xx_setup_pci(); #ifdef CONFIG_QUICC_ENGINE qe_reset(); @@ -122,54 +121,7 @@ static void __init mpc83xx_km_setup_arch(void) #endif /* CONFIG_QUICC_ENGINE */ } -static struct of_device_id kmpbec83xx_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - { .type = "qe", }, - { .compatible = "fsl,qe", }, - {}, -}; - -static int __init kmeter_declare_of_platform_devices(void) -{ - /* Publish the QE devices */ - of_platform_bus_probe(NULL, kmpbec83xx_ids, NULL); - - return 0; -} -machine_device_initcall(mpc83xx_km, kmeter_declare_of_platform_devices); - -static void __init mpc83xx_km_init_IRQ(void) -{ - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, "fsl,pq2pro-pic"); - if (!np) { - np = of_find_node_by_type(NULL, "ipic"); - if (!np) - return; - } - - ipic_init(np, 0); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); - of_node_put(np); - -#ifdef CONFIG_QUICC_ENGINE - np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); - if (!np) { - np = of_find_node_by_type(NULL, "qeic"); - if (!np) - return; - } - qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic); - of_node_put(np); -#endif /* CONFIG_QUICC_ENGINE */ -} +machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices); /* list of the supported boards */ static char *board[] __initdata = { @@ -198,7 +150,7 @@ define_machine(mpc83xx_km) { .name = "mpc83xx-km-platform", .probe = mpc83xx_km_probe, .setup_arch = mpc83xx_km_setup_arch, - .init_IRQ = mpc83xx_km_init_IRQ, + .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ, .get_irq = ipic_get_irq, .restart = mpc83xx_restart, .time_init = mpc83xx_time_init, diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c index f01806c940e1..125336f750c6 100644 --- a/arch/powerpc/platforms/83xx/misc.c +++ b/arch/powerpc/platforms/83xx/misc.c @@ -11,10 +11,15 @@ #include <linux/stddef.h> #include <linux/kernel.h> +#include <linux/of_platform.h> +#include <linux/pci.h> #include <asm/io.h> #include <asm/hw_irq.h> +#include <asm/ipic.h> +#include <asm/qe_ic.h> #include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> #include "mpc83xx.h" @@ -65,3 +70,75 @@ long __init mpc83xx_time_init(void) return 0; } + +void __init mpc83xx_ipic_init_IRQ(void) +{ + struct device_node *np; + + /* looking for fsl,pq2pro-pic which is asl compatible with fsl,ipic */ + np = of_find_compatible_node(NULL, NULL, "fsl,ipic"); + if (!np) + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + of_node_put(np); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); +} + +#ifdef CONFIG_QUICC_ENGINE +void __init mpc83xx_qe_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); + if (!np) { + np = of_find_node_by_type(NULL, "qeic"); + if (!np) + return; + } + qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic); + of_node_put(np); +} + +void __init mpc83xx_ipic_and_qe_init_IRQ(void) +{ + mpc83xx_ipic_init_IRQ(); + mpc83xx_qe_init_IRQ(); +} +#endif /* CONFIG_QUICC_ENGINE */ + +static struct of_device_id __initdata of_bus_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .compatible = "simple-bus" }, + { .compatible = "gianfar" }, + { .compatible = "gpio-leds", }, + { .type = "qe", }, + { .compatible = "fsl,qe", }, + {}, +}; + +int __init mpc83xx_declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + return 0; +} + +#ifdef CONFIG_PCI +void __init mpc83xx_setup_pci(void) +{ + struct device_node *np; + + for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") + mpc83xx_add_bridge(np); + for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie") + mpc83xx_add_bridge(np); +} +#endif diff --git a/arch/powerpc/platforms/83xx/mpc830x_rdb.c b/arch/powerpc/platforms/83xx/mpc830x_rdb.c index d0c4e15b7794..4f2d9fea77b7 100644 --- a/arch/powerpc/platforms/83xx/mpc830x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc830x_rdb.c @@ -27,36 +27,13 @@ */ static void __init mpc830x_rdb_setup_arch(void) { -#ifdef CONFIG_PCI - struct device_node *np; -#endif - if (ppc_md.progress) ppc_md.progress("mpc830x_rdb_setup_arch()", 0); -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8308-pcie") - mpc83xx_add_bridge(np); -#endif + mpc83xx_setup_pci(); mpc831x_usb_cfg(); } -static void __init mpc830x_rdb_init_IRQ(void) -{ - struct device_node *np; - - np = of_find_node_by_type(NULL, "ipic"); - if (!np) - return; - - ipic_init(np, 0); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); -} - static const char *board[] __initdata = { "MPC8308RDB", "fsl,mpc8308rdb", @@ -72,24 +49,13 @@ static int __init mpc830x_rdb_probe(void) return of_flat_dt_match(of_get_flat_dt_root(), board); } -static struct of_device_id __initdata of_bus_ids[] = { - { .compatible = "simple-bus" }, - { .compatible = "gianfar" }, - {}, -}; - -static int __init declare_of_platform_devices(void) -{ - of_platform_bus_probe(NULL, of_bus_ids, NULL); - return 0; -} -machine_device_initcall(mpc830x_rdb, declare_of_platform_devices); +machine_device_initcall(mpc830x_rdb, mpc83xx_declare_of_platform_devices); define_machine(mpc830x_rdb) { .name = "MPC830x RDB", .probe = mpc830x_rdb_probe, .setup_arch = mpc830x_rdb_setup_arch, - .init_IRQ = mpc830x_rdb_init_IRQ, + .init_IRQ = mpc83xx_ipic_init_IRQ, .get_irq = ipic_get_irq, .restart = mpc83xx_restart, .time_init = mpc83xx_time_init, diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c index f859ead49a8d..fa25977c52de 100644 --- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c @@ -28,38 +28,13 @@ */ static void __init mpc831x_rdb_setup_arch(void) { -#ifdef CONFIG_PCI - struct device_node *np; -#endif - if (ppc_md.progress) ppc_md.progress("mpc831x_rdb_setup_arch()", 0); -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") - mpc83xx_add_bridge(np); - for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie") - mpc83xx_add_bridge(np); -#endif + mpc83xx_setup_pci(); mpc831x_usb_cfg(); } -static void __init mpc831x_rdb_init_IRQ(void) -{ - struct device_node *np; - - np = of_find_node_by_type(NULL, "ipic"); - if (!np) - return; - - ipic_init(np, 0); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); -} - static const char *board[] __initdata = { "MPC8313ERDB", "fsl,mpc8315erdb", @@ -74,25 +49,13 @@ static int __init mpc831x_rdb_probe(void) return of_flat_dt_match(of_get_flat_dt_root(), board); } -static struct of_device_id __initdata of_bus_ids[] = { - { .compatible = "simple-bus" }, - { .compatible = "gianfar" }, - { .compatible = "gpio-leds", }, - {}, -}; - -static int __init declare_of_platform_devices(void) -{ - of_platform_bus_probe(NULL, of_bus_ids, NULL); - return 0; -} -machine_device_initcall(mpc831x_rdb, declare_of_platform_devices); +machine_device_initcall(mpc831x_rdb, mpc83xx_declare_of_platform_devices); define_machine(mpc831x_rdb) { .name = "MPC831x RDB", .probe = mpc831x_rdb_probe, .setup_arch = mpc831x_rdb_setup_arch, - .init_IRQ = mpc831x_rdb_init_IRQ, + .init_IRQ = mpc83xx_ipic_init_IRQ, .get_irq = ipic_get_irq, .restart = mpc83xx_restart, .time_init = mpc83xx_time_init, diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index 32a52896822f..e36bc611dd6e 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -72,10 +72,7 @@ static void __init mpc832x_sys_setup_arch(void) of_node_put(np); } -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") - mpc83xx_add_bridge(np); -#endif + mpc83xx_setup_pci(); #ifdef CONFIG_QUICC_ENGINE qe_reset(); @@ -101,51 +98,7 @@ static void __init mpc832x_sys_setup_arch(void) #endif /* CONFIG_QUICC_ENGINE */ } -static struct of_device_id mpc832x_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - { .type = "qe", }, - { .compatible = "fsl,qe", }, - {}, -}; - -static int __init mpc832x_declare_of_platform_devices(void) -{ - /* Publish the QE devices */ - of_platform_bus_probe(NULL, mpc832x_ids, NULL); - - return 0; -} -machine_device_initcall(mpc832x_mds, mpc832x_declare_of_platform_devices); - -static void __init mpc832x_sys_init_IRQ(void) -{ - struct device_node *np; - - np = of_find_node_by_type(NULL, "ipic"); - if (!np) - return; - - ipic_init(np, 0); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); - of_node_put(np); - -#ifdef CONFIG_QUICC_ENGINE - np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); - if (!np) { - np = of_find_node_by_type(NULL, "qeic"); - if (!np) - return; - } - qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic); - of_node_put(np); -#endif /* CONFIG_QUICC_ENGINE */ -} +machine_device_initcall(mpc832x_mds, mpc83xx_declare_of_platform_devices); /* * Called very early, MMU is off, device-tree isn't unflattened @@ -161,7 +114,7 @@ define_machine(mpc832x_mds) { .name = "MPC832x MDS", .probe = mpc832x_sys_probe, .setup_arch = mpc832x_sys_setup_arch, - .init_IRQ = mpc832x_sys_init_IRQ, + .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ, .get_irq = ipic_get_irq, .restart = mpc83xx_restart, .time_init = mpc83xx_time_init, diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c index 17f99745f0e4..eff5baabc3fb 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c @@ -193,17 +193,14 @@ machine_device_initcall(mpc832x_rdb, mpc832x_spi_init); */ static void __init mpc832x_rdb_setup_arch(void) { -#if defined(CONFIG_PCI) || defined(CONFIG_QUICC_ENGINE) +#if defined(CONFIG_QUICC_ENGINE) struct device_node *np; #endif if (ppc_md.progress) ppc_md.progress("mpc832x_rdb_setup_arch()", 0); -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") - mpc83xx_add_bridge(np); -#endif + mpc83xx_setup_pci(); #ifdef CONFIG_QUICC_ENGINE qe_reset(); @@ -218,52 +215,7 @@ static void __init mpc832x_rdb_setup_arch(void) #endif /* CONFIG_QUICC_ENGINE */ } -static struct of_device_id mpc832x_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - { .type = "qe", }, - { .compatible = "fsl,qe", }, - {}, -}; - -static int __init mpc832x_declare_of_platform_devices(void) -{ - /* Publish the QE devices */ - of_platform_bus_probe(NULL, mpc832x_ids, NULL); - - return 0; -} -machine_device_initcall(mpc832x_rdb, mpc832x_declare_of_platform_devices); - -static void __init mpc832x_rdb_init_IRQ(void) -{ - - struct device_node *np; - - np = of_find_node_by_type(NULL, "ipic"); - if (!np) - return; - - ipic_init(np, 0); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); - of_node_put(np); - -#ifdef CONFIG_QUICC_ENGINE - np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); - if (!np) { - np = of_find_node_by_type(NULL, "qeic"); - if (!np) - return; - } - qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic); - of_node_put(np); -#endif /* CONFIG_QUICC_ENGINE */ -} +machine_device_initcall(mpc832x_rdb, mpc83xx_declare_of_platform_devices); /* * Called very early, MMU is off, device-tree isn't unflattened @@ -279,7 +231,7 @@ define_machine(mpc832x_rdb) { .name = "MPC832x RDB", .probe = mpc832x_rdb_probe, .setup_arch = mpc832x_rdb_setup_arch, - .init_IRQ = mpc832x_rdb_init_IRQ, + .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ, .get_irq = ipic_get_irq, .restart = mpc83xx_restart, .time_init = mpc83xx_time_init, diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 6b45969567d4..39849dd1b5bb 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -41,13 +41,12 @@ static struct of_device_id __initdata mpc834x_itx_ids[] = { { .compatible = "fsl,pq2pro-localbus", }, - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, {}, }; static int __init mpc834x_itx_declare_of_platform_devices(void) { + mpc83xx_declare_of_platform_devices(); return of_platform_bus_probe(NULL, mpc834x_itx_ids, NULL); } machine_device_initcall(mpc834x_itx, mpc834x_itx_declare_of_platform_devices); @@ -59,37 +58,14 @@ machine_device_initcall(mpc834x_itx, mpc834x_itx_declare_of_platform_devices); */ static void __init mpc834x_itx_setup_arch(void) { -#ifdef CONFIG_PCI - struct device_node *np; -#endif - if (ppc_md.progress) ppc_md.progress("mpc834x_itx_setup_arch()", 0); -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") - mpc83xx_add_bridge(np); -#endif + mpc83xx_setup_pci(); mpc834x_usb_cfg(); } -static void __init mpc834x_itx_init_IRQ(void) -{ - struct device_node *np; - - np = of_find_node_by_type(NULL, "ipic"); - if (!np) - return; - - ipic_init(np, 0); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); -} - /* * Called very early, MMU is off, device-tree isn't unflattened */ @@ -104,7 +80,7 @@ define_machine(mpc834x_itx) { .name = "MPC834x ITX", .probe = mpc834x_itx_probe, .setup_arch = mpc834x_itx_setup_arch, - .init_IRQ = mpc834x_itx_init_IRQ, + .init_IRQ = mpc83xx_ipic_init_IRQ, .get_irq = ipic_get_irq, .restart = mpc83xx_restart, .time_init = mpc83xx_time_init, diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c index 041c5177e737..5828d8e97c37 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -77,51 +77,15 @@ static int mpc834xemds_usb_cfg(void) */ static void __init mpc834x_mds_setup_arch(void) { -#ifdef CONFIG_PCI - struct device_node *np; -#endif - if (ppc_md.progress) ppc_md.progress("mpc834x_mds_setup_arch()", 0); -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") - mpc83xx_add_bridge(np); -#endif + mpc83xx_setup_pci(); mpc834xemds_usb_cfg(); } -static void __init mpc834x_mds_init_IRQ(void) -{ - struct device_node *np; - - np = of_find_node_by_type(NULL, "ipic"); - if (!np) - return; - - ipic_init(np, 0); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); -} - -static struct of_device_id mpc834x_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - {}, -}; - -static int __init mpc834x_declare_of_platform_devices(void) -{ - of_platform_bus_probe(NULL, mpc834x_ids, NULL); - return 0; -} -machine_device_initcall(mpc834x_mds, mpc834x_declare_of_platform_devices); +machine_device_initcall(mpc834x_mds, mpc83xx_declare_of_platform_devices); /* * Called very early, MMU is off, device-tree isn't unflattened @@ -137,7 +101,7 @@ define_machine(mpc834x_mds) { .name = "MPC834x MDS", .probe = mpc834x_mds_probe, .setup_arch = mpc834x_mds_setup_arch, - .init_IRQ = mpc834x_mds_init_IRQ, + .init_IRQ = mpc83xx_ipic_init_IRQ, .get_irq = ipic_get_irq, .restart = mpc83xx_restart, .time_init = mpc83xx_time_init, diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c index 934cc8c46bbc..ad8e4bcd7d55 100644 --- a/arch/powerpc/platforms/83xx/mpc836x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c @@ -80,10 +80,7 @@ static void __init mpc836x_mds_setup_arch(void) of_node_put(np); } -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") - mpc83xx_add_bridge(np); -#endif + mpc83xx_setup_pci(); #ifdef CONFIG_QUICC_ENGINE qe_reset(); @@ -144,23 +141,7 @@ static void __init mpc836x_mds_setup_arch(void) #endif /* CONFIG_QUICC_ENGINE */ } -static struct of_device_id mpc836x_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - { .type = "qe", }, - { .compatible = "fsl,qe", }, - {}, -}; - -static int __init mpc836x_declare_of_platform_devices(void) -{ - /* Publish the QE devices */ - of_platform_bus_probe(NULL, mpc836x_ids, NULL); - - return 0; -} -machine_device_initcall(mpc836x_mds, mpc836x_declare_of_platform_devices); +machine_device_initcall(mpc836x_mds, mpc83xx_declare_of_platform_devices); #ifdef CONFIG_QE_USB static int __init mpc836x_usb_cfg(void) @@ -226,34 +207,6 @@ err: machine_arch_initcall(mpc836x_mds, mpc836x_usb_cfg); #endif /* CONFIG_QE_USB */ -static void __init mpc836x_mds_init_IRQ(void) -{ - struct device_node *np; - - np = of_find_node_by_type(NULL, "ipic"); - if (!np) - return; - - ipic_init(np, 0); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); - of_node_put(np); - -#ifdef CONFIG_QUICC_ENGINE - np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); - if (!np) { - np = of_find_node_by_type(NULL, "qeic"); - if (!np) - return; - } - qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic); - of_node_put(np); -#endif /* CONFIG_QUICC_ENGINE */ -} - /* * Called very early, MMU is off, device-tree isn't unflattened */ @@ -268,7 +221,7 @@ define_machine(mpc836x_mds) { .name = "MPC836x MDS", .probe = mpc836x_mds_probe, .setup_arch = mpc836x_mds_setup_arch, - .init_IRQ = mpc836x_mds_init_IRQ, + .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ, .get_irq = ipic_get_irq, .restart = mpc83xx_restart, .time_init = mpc83xx_time_init, diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c index b0090aac9642..f8769d713d61 100644 --- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c +++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c @@ -27,61 +27,19 @@ #include "mpc83xx.h" -static struct of_device_id __initdata mpc836x_rdk_ids[] = { - { .compatible = "simple-bus", }, - {}, -}; - -static int __init mpc836x_rdk_declare_of_platform_devices(void) -{ - return of_platform_bus_probe(NULL, mpc836x_rdk_ids, NULL); -} -machine_device_initcall(mpc836x_rdk, mpc836x_rdk_declare_of_platform_devices); +machine_device_initcall(mpc836x_rdk, mpc83xx_declare_of_platform_devices); static void __init mpc836x_rdk_setup_arch(void) { -#ifdef CONFIG_PCI - struct device_node *np; -#endif - if (ppc_md.progress) ppc_md.progress("mpc836x_rdk_setup_arch()", 0); -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") - mpc83xx_add_bridge(np); -#endif + mpc83xx_setup_pci(); #ifdef CONFIG_QUICC_ENGINE qe_reset(); #endif } -static void __init mpc836x_rdk_init_IRQ(void) -{ - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, "fsl,ipic"); - if (!np) - return; - - ipic_init(np, 0); - - /* - * Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); - of_node_put(np); -#ifdef CONFIG_QUICC_ENGINE - np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); - if (!np) - return; - - qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic); - of_node_put(np); -#endif -} - /* * Called very early, MMU is off, device-tree isn't unflattened. */ @@ -96,7 +54,7 @@ define_machine(mpc836x_rdk) { .name = "MPC836x RDK", .probe = mpc836x_rdk_probe, .setup_arch = mpc836x_rdk_setup_arch, - .init_IRQ = mpc836x_rdk_init_IRQ, + .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ, .get_irq = ipic_get_irq, .restart = mpc83xx_restart, .time_init = mpc83xx_time_init, diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c index 83068322abd1..e53a60b6c863 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c @@ -79,54 +79,14 @@ out: */ static void __init mpc837x_mds_setup_arch(void) { -#ifdef CONFIG_PCI - struct device_node *np; -#endif - if (ppc_md.progress) ppc_md.progress("mpc837x_mds_setup_arch()", 0); -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") - mpc83xx_add_bridge(np); - for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie") - mpc83xx_add_bridge(np); -#endif + mpc83xx_setup_pci(); mpc837xmds_usb_cfg(); } -static struct of_device_id mpc837x_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - {}, -}; - -static int __init mpc837x_declare_of_platform_devices(void) -{ - /* Publish platform_device */ - of_platform_bus_probe(NULL, mpc837x_ids, NULL); - - return 0; -} -machine_device_initcall(mpc837x_mds, mpc837x_declare_of_platform_devices); - -static void __init mpc837x_mds_init_IRQ(void) -{ - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, "fsl,ipic"); - if (!np) - return; - - ipic_init(np, 0); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); -} +machine_device_initcall(mpc837x_mds, mpc83xx_declare_of_platform_devices); /* * Called very early, MMU is off, device-tree isn't unflattened @@ -142,7 +102,7 @@ define_machine(mpc837x_mds) { .name = "MPC837x MDS", .probe = mpc837x_mds_probe, .setup_arch = mpc837x_mds_setup_arch, - .init_IRQ = mpc837x_mds_init_IRQ, + .init_IRQ = mpc83xx_ipic_init_IRQ, .get_irq = ipic_get_irq, .restart = mpc83xx_restart, .time_init = mpc83xx_time_init, diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c index 7bafbf2ec0f9..16c9c9cbbb7f 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c @@ -50,56 +50,15 @@ static void mpc837x_rdb_sd_cfg(void) */ static void __init mpc837x_rdb_setup_arch(void) { -#ifdef CONFIG_PCI - struct device_node *np; -#endif - if (ppc_md.progress) ppc_md.progress("mpc837x_rdb_setup_arch()", 0); -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") - mpc83xx_add_bridge(np); - for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie") - mpc83xx_add_bridge(np); -#endif + mpc83xx_setup_pci(); mpc837x_usb_cfg(); mpc837x_rdb_sd_cfg(); } -static struct of_device_id mpc837x_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - { .compatible = "gpio-leds", }, - {}, -}; - -static int __init mpc837x_declare_of_platform_devices(void) -{ - /* Publish platform_device */ - of_platform_bus_probe(NULL, mpc837x_ids, NULL); - - return 0; -} -machine_device_initcall(mpc837x_rdb, mpc837x_declare_of_platform_devices); - -static void __init mpc837x_rdb_init_IRQ(void) -{ - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, "fsl,ipic"); - if (!np) - return; - - ipic_init(np, 0); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); -} +machine_device_initcall(mpc837x_rdb, mpc83xx_declare_of_platform_devices); static const char *board[] __initdata = { "fsl,mpc8377rdb", @@ -121,7 +80,7 @@ define_machine(mpc837x_rdb) { .name = "MPC837x RDB/WLAN", .probe = mpc837x_rdb_probe, .setup_arch = mpc837x_rdb_setup_arch, - .init_IRQ = mpc837x_rdb_init_IRQ, + .init_IRQ = mpc83xx_ipic_init_IRQ, .get_irq = ipic_get_irq, .restart = mpc83xx_restart, .time_init = mpc83xx_time_init, diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 82a434510d83..0cf74d7ea1c5 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -70,5 +70,21 @@ extern long mpc83xx_time_init(void); extern int mpc837x_usb_cfg(void); extern int mpc834x_usb_cfg(void); extern int mpc831x_usb_cfg(void); +extern void mpc83xx_ipic_init_IRQ(void); +#ifdef CONFIG_QUICC_ENGINE +extern void mpc83xx_qe_init_IRQ(void); +extern void mpc83xx_ipic_and_qe_init_IRQ(void); +#else +static inline void __init mpc83xx_qe_init_IRQ(void) {} +#define mpc83xx_ipic_and_qe_init_IRQ mpc83xx_ipic_init_IRQ +#endif /* CONFIG_QUICC_ENGINE */ + +#ifdef CONFIG_PCI +extern void mpc83xx_setup_pci(void); +#else +#define mpc83xx_setup_pci() do {} while (0) +#endif + +extern int mpc83xx_declare_of_platform_devices(void); #endif /* __MPC83XX_H__ */ diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c index af41d8c810a8..8a81d7640b1f 100644 --- a/arch/powerpc/platforms/83xx/sbc834x.c +++ b/arch/powerpc/platforms/83xx/sbc834x.c @@ -48,52 +48,13 @@ */ static void __init sbc834x_setup_arch(void) { -#ifdef CONFIG_PCI - struct device_node *np; -#endif - if (ppc_md.progress) ppc_md.progress("sbc834x_setup_arch()", 0); -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") - mpc83xx_add_bridge(np); -#endif - + mpc83xx_setup_pci(); } -static void __init sbc834x_init_IRQ(void) -{ - struct device_node *np; - - np = of_find_node_by_type(NULL, "ipic"); - if (!np) - return; - - ipic_init(np, 0); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); - - of_node_put(np); -} - -static struct __initdata of_device_id sbc834x_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - {}, -}; - -static int __init sbc834x_declare_of_platform_devices(void) -{ - of_platform_bus_probe(NULL, sbc834x_ids, NULL); - return 0; -} -machine_device_initcall(sbc834x, sbc834x_declare_of_platform_devices); +machine_device_initcall(sbc834x, mpc83xx_declare_of_platform_devices); /* * Called very early, MMU is off, device-tree isn't unflattened @@ -102,14 +63,14 @@ static int __init sbc834x_probe(void) { unsigned long root = of_get_flat_dt_root(); - return of_flat_dt_is_compatible(root, "SBC834x"); + return of_flat_dt_is_compatible(root, "SBC834xE"); } define_machine(sbc834x) { - .name = "SBC834x", + .name = "SBC834xE", .probe = sbc834x_probe, .setup_arch = sbc834x_setup_arch, - .init_IRQ = sbc834x_init_IRQ, + .init_IRQ = mpc83xx_ipic_init_IRQ, .get_irq = ipic_get_irq, .restart = mpc83xx_restart, .time_init = mpc83xx_time_init, diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index bc5acb95917a..9cb2d4320dcc 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -3,6 +3,8 @@ # obj-$(CONFIG_SMP) += smp.o +obj-y += common.o + obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c new file mode 100644 index 000000000000..9fef5302adc1 --- /dev/null +++ b/arch/powerpc/platforms/85xx/common.c @@ -0,0 +1,66 @@ +/* + * Routines common to most mpc85xx-based boards. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/of_platform.h> + +#include <sysdev/cpm2_pic.h> + +#include "mpc85xx.h" + +static struct of_device_id __initdata mpc85xx_common_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .compatible = "simple-bus", }, + { .name = "cpm", }, + { .name = "localbus", }, + { .compatible = "gianfar", }, + { .compatible = "fsl,qe", }, + { .compatible = "fsl,cpm2", }, + { .compatible = "fsl,srio", }, + {}, +}; + +int __init mpc85xx_common_publish_devices(void) +{ + return of_platform_bus_probe(NULL, mpc85xx_common_ids, NULL); +} +#ifdef CONFIG_CPM2 +static void cpm2_cascade(unsigned int irq, struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + int cascade_irq; + + while ((cascade_irq = cpm2_get_irq()) >= 0) + generic_handle_irq(cascade_irq); + + chip->irq_eoi(&desc->irq_data); +} + + +void __init mpc85xx_cpm2_pic_init(void) +{ + struct device_node *np; + int irq; + + /* Setup CPM2 PIC */ + np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic"); + if (np == NULL) { + printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n"); + return; + } + irq = irq_of_parse_and_map(np, 0); + if (irq == NO_IRQ) { + of_node_put(np); + printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n"); + return; + } + + cpm2_pic_init(np); + of_node_put(np); + irq_set_chained_handler(irq, cpm2_cascade); +} +#endif diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c index 802ad110b757..07e3e6c47371 100644 --- a/arch/powerpc/platforms/85xx/corenet_ds.c +++ b/arch/powerpc/platforms/85xx/corenet_ds.c @@ -31,32 +31,18 @@ #include <linux/of_platform.h> #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> +#include "smp.h" void __init corenet_ds_pic_init(void) { struct mpic *mpic; - struct resource r; - struct device_node *np = NULL; - unsigned int flags = MPIC_PRIMARY | MPIC_BIG_ENDIAN | + unsigned int flags = MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU; - np = of_find_node_by_type(np, "open-pic"); - - if (np == NULL) { - printk(KERN_ERR "Could not find open-pic node\n"); - return; - } - - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_ERR "Failed to map mpic register space\n"); - of_node_put(np); - return; - } - if (ppc_md.get_irq == mpic_get_coreint_irq) flags |= MPIC_ENABLE_COREINT; - mpic = mpic_alloc(np, r.start, flags, 0, 256, " OpenPIC "); + mpic = mpic_alloc(NULL, 0, flags, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); @@ -65,10 +51,6 @@ void __init corenet_ds_pic_init(void) /* * Setup the architecture */ -#ifdef CONFIG_SMP -void __init mpc85xx_smp_init(void); -#endif - void __init corenet_ds_setup_arch(void) { #ifdef CONFIG_PCI @@ -77,9 +59,7 @@ void __init corenet_ds_setup_arch(void) #endif dma_addr_t max = 0xffffffff; -#ifdef CONFIG_SMP mpc85xx_smp_init(); -#endif #ifdef CONFIG_PCI for_each_node_by_type(np, "pci") { @@ -112,7 +92,7 @@ static const struct of_device_id of_device_ids[] __devinitconst = { .compatible = "simple-bus" }, { - .compatible = "fsl,rapidio-delta", + .compatible = "fsl,srio", }, { .compatible = "fsl,p4080-pcie", diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c index c46f9359be15..20f75d7819c6 100644 --- a/arch/powerpc/platforms/85xx/ksi8560.c +++ b/arch/powerpc/platforms/85xx/ksi8560.c @@ -35,6 +35,7 @@ #include <asm/cpm2.h> #include <sysdev/cpm2_pic.h> +#include "mpc85xx.h" #define KSI8560_CPLD_HVR 0x04 /* Hardware Version Register */ #define KSI8560_CPLD_PVR 0x08 /* PLD Version Register */ @@ -54,60 +55,15 @@ static void machine_restart(char *cmd) for (;;); } -static void cpm2_cascade(unsigned int irq, struct irq_desc *desc) -{ - struct irq_chip *chip = irq_desc_get_chip(desc); - int cascade_irq; - - while ((cascade_irq = cpm2_get_irq()) >= 0) - generic_handle_irq(cascade_irq); - - chip->irq_eoi(&desc->irq_data); -} - static void __init ksi8560_pic_init(void) { - struct mpic *mpic; - struct resource r; - struct device_node *np; -#ifdef CONFIG_CPM2 - int irq; -#endif - - np = of_find_node_by_type(NULL, "open-pic"); - - if (np == NULL) { - printk(KERN_ERR "Could not find open-pic node\n"); - return; - } - - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_ERR "Could not map mpic register space\n"); - of_node_put(np); - return; - } - - mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + struct mpic *mpic = mpic_alloc(NULL, 0, + MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); - of_node_put(np); - mpic_init(mpic); -#ifdef CONFIG_CPM2 - /* Setup CPM2 PIC */ - np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic"); - if (np == NULL) { - printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n"); - return; - } - irq = irq_of_parse_and_map(np, 0); - - cpm2_pic_init(np); - of_node_put(np); - irq_set_chained_handler(irq, cpm2_cascade); -#endif + mpc85xx_cpm2_pic_init(); } #ifdef CONFIG_CPM2 @@ -215,22 +171,7 @@ static void ksi8560_show_cpuinfo(struct seq_file *m) seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); } -static struct of_device_id __initdata of_bus_ids[] = { - { .type = "soc", }, - { .type = "simple-bus", }, - { .name = "cpm", }, - { .name = "localbus", }, - { .compatible = "gianfar", }, - {}, -}; - -static int __init declare_of_platform_devices(void) -{ - of_platform_bus_probe(NULL, of_bus_ids, NULL); - - return 0; -} -machine_device_initcall(ksi8560, declare_of_platform_devices); +machine_device_initcall(ksi8560, mpc85xx_common_publish_devices); /* * Called very early, device-tree isn't unflattened diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c index f79f2f102141..cf266826682e 100644 --- a/arch/powerpc/platforms/85xx/mpc8536_ds.c +++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c @@ -32,31 +32,15 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> +#include "mpc85xx.h" + void __init mpc8536_ds_pic_init(void) { - struct mpic *mpic; - struct resource r; - struct device_node *np; - - np = of_find_node_by_type(NULL, "open-pic"); - if (np == NULL) { - printk(KERN_ERR "Could not find open-pic node\n"); - return; - } - - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_ERR "Failed to map mpic register space\n"); - of_node_put(np); - return; - } - - mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | + struct mpic *mpic = mpic_alloc(NULL, 0, + MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); - of_node_put(np); - mpic_init(mpic); } @@ -104,19 +88,7 @@ static void __init mpc8536_ds_setup_arch(void) printk("MPC8536 DS board from Freescale Semiconductor\n"); } -static struct of_device_id __initdata mpc8536_ds_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - {}, -}; - -static int __init mpc8536_ds_publish_devices(void) -{ - return of_platform_bus_probe(NULL, mpc8536_ds_ids, NULL); -} -machine_device_initcall(mpc8536_ds, mpc8536_ds_publish_devices); +machine_device_initcall(mpc8536_ds, mpc85xx_common_publish_devices); machine_arch_initcall(mpc8536_ds, swiotlb_setup_bus_notifier); diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h new file mode 100644 index 000000000000..2aa7c5dc2c7f --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc85xx.h @@ -0,0 +1,11 @@ +#ifndef MPC85xx_H +#define MPC85xx_H +extern int mpc85xx_common_publish_devices(void); + +#ifdef CONFIG_CPM2 +extern void mpc85xx_cpm2_pic_init(void); +#else +static inline void __init mpc85xx_cpm2_pic_init(void) {} +#endif /* CONFIG_CPM2 */ + +#endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 3b2c9bb66199..3bebb5173bfc 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -35,6 +35,8 @@ #include <sysdev/cpm2_pic.h> #endif +#include "mpc85xx.h" + #ifdef CONFIG_PCI static int mpc85xx_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn) @@ -46,63 +48,15 @@ static int mpc85xx_exclude_device(struct pci_controller *hose, } #endif /* CONFIG_PCI */ -#ifdef CONFIG_CPM2 - -static void cpm2_cascade(unsigned int irq, struct irq_desc *desc) -{ - struct irq_chip *chip = irq_desc_get_chip(desc); - int cascade_irq; - - while ((cascade_irq = cpm2_get_irq()) >= 0) - generic_handle_irq(cascade_irq); - - chip->irq_eoi(&desc->irq_data); -} - -#endif /* CONFIG_CPM2 */ - static void __init mpc85xx_ads_pic_init(void) { - struct mpic *mpic; - struct resource r; - struct device_node *np = NULL; -#ifdef CONFIG_CPM2 - int irq; -#endif - - np = of_find_node_by_type(np, "open-pic"); - if (!np) { - printk(KERN_ERR "Could not find open-pic node\n"); - return; - } - - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_ERR "Could not map mpic register space\n"); - of_node_put(np); - return; - } - - mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + struct mpic *mpic = mpic_alloc(NULL, 0, + MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); - of_node_put(np); - mpic_init(mpic); -#ifdef CONFIG_CPM2 - /* Setup CPM2 PIC */ - np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic"); - if (np == NULL) { - printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n"); - return; - } - irq = irq_of_parse_and_map(np, 0); - - cpm2_pic_init(np); - of_node_put(np); - irq_set_chained_handler(irq, cpm2_cascade); -#endif + mpc85xx_cpm2_pic_init(); } /* @@ -221,23 +175,7 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m) seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); } -static struct of_device_id __initdata of_bus_ids[] = { - { .name = "soc", }, - { .type = "soc", }, - { .name = "cpm", }, - { .name = "localbus", }, - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - {}, -}; - -static int __init declare_of_platform_devices(void) -{ - of_platform_bus_probe(NULL, of_bus_ids, NULL); - - return 0; -} -machine_device_initcall(mpc85xx_ads, declare_of_platform_devices); +machine_device_initcall(mpc85xx_ads, mpc85xx_common_publish_devices); /* * Called very early, device-tree isn't unflattened diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 66cb8d64079f..40f03da616a9 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -46,6 +46,8 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> +#include "mpc85xx.h" + /* CADMUS info */ /* xxx - galak, move into device tree */ #define CADMUS_BASE (0xf8004000) @@ -177,7 +179,7 @@ static irqreturn_t mpc85xx_8259_cascade_action(int irq, void *dev_id) static struct irqaction mpc85xxcds_8259_irqaction = { .handler = mpc85xx_8259_cascade_action, - .flags = IRQF_SHARED, + .flags = IRQF_SHARED | IRQF_NO_THREAD, .name = "8259 cascade", }; #endif /* PPC_I8259 */ @@ -186,30 +188,10 @@ static struct irqaction mpc85xxcds_8259_irqaction = { static void __init mpc85xx_cds_pic_init(void) { struct mpic *mpic; - struct resource r; - struct device_node *np = NULL; - - np = of_find_node_by_type(np, "open-pic"); - - if (np == NULL) { - printk(KERN_ERR "Could not find open-pic node\n"); - return; - } - - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_ERR "Failed to map mpic register space\n"); - of_node_put(np); - return; - } - - mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + mpic = mpic_alloc(NULL, 0, + MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); - - /* Return the mpic node */ - of_node_put(np); - mpic_init(mpic); } @@ -330,19 +312,7 @@ static int __init mpc85xx_cds_probe(void) return of_flat_dt_is_compatible(root, "MPC85xxCDS"); } -static struct of_device_id __initdata of_bus_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - {}, -}; - -static int __init declare_of_platform_devices(void) -{ - return of_platform_bus_probe(NULL, of_bus_ids, NULL); -} -machine_device_initcall(mpc85xx_cds, declare_of_platform_devices); +machine_device_initcall(mpc85xx_cds, mpc85xx_common_publish_devices); define_machine(mpc85xx_cds) { .name = "MPC85xx CDS", diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index 1b9a8cf1873a..eefbb91e1d61 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -35,6 +35,9 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> +#include "smp.h" + +#include "mpc85xx.h" #undef DEBUG @@ -60,43 +63,27 @@ static void mpc85xx_8259_cascade(unsigned int irq, struct irq_desc *desc) void __init mpc85xx_ds_pic_init(void) { struct mpic *mpic; - struct resource r; - struct device_node *np; #ifdef CONFIG_PPC_I8259 + struct device_node *np; struct device_node *cascade_node = NULL; int cascade_irq; #endif unsigned long root = of_get_flat_dt_root(); - np = of_find_node_by_type(NULL, "open-pic"); - if (np == NULL) { - printk(KERN_ERR "Could not find open-pic node\n"); - return; - } - - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_ERR "Failed to map mpic register space\n"); - of_node_put(np); - return; - } - if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS-CAMP")) { - mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | + mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); } else { - mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | + mpic = mpic_alloc(NULL, 0, + MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); } BUG_ON(mpic == NULL); - of_node_put(np); - mpic_init(mpic); #ifdef CONFIG_PPC_I8259 @@ -152,9 +139,6 @@ static int mpc85xx_exclude_device(struct pci_controller *hose, /* * Setup the architecture */ -#ifdef CONFIG_SMP -extern void __init mpc85xx_smp_init(void); -#endif static void __init mpc85xx_ds_setup_arch(void) { #ifdef CONFIG_PCI @@ -187,9 +171,7 @@ static void __init mpc85xx_ds_setup_arch(void) ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif -#ifdef CONFIG_SMP mpc85xx_smp_init(); -#endif #ifdef CONFIG_SWIOTLB if (memblock_end_of_DRAM() > max) { @@ -219,21 +201,9 @@ static int __init mpc8544_ds_probe(void) return 0; } -static struct of_device_id __initdata mpc85xxds_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - {}, -}; - -static int __init mpc85xxds_publish_devices(void) -{ - return of_platform_bus_probe(NULL, mpc85xxds_ids, NULL); -} -machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices); -machine_device_initcall(mpc8572_ds, mpc85xxds_publish_devices); -machine_device_initcall(p2020_ds, mpc85xxds_publish_devices); +machine_device_initcall(mpc8544_ds, mpc85xx_common_publish_devices); +machine_device_initcall(mpc8572_ds, mpc85xx_common_publish_devices); +machine_device_initcall(p2020_ds, mpc85xx_common_publish_devices); machine_arch_initcall(mpc8544_ds, swiotlb_setup_bus_notifier); machine_arch_initcall(mpc8572_ds, swiotlb_setup_bus_notifier); diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index a23a3ff634c5..1d15a0cd2c82 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -51,6 +51,9 @@ #include <asm/qe_ic.h> #include <asm/mpic.h> #include <asm/swiotlb.h> +#include "smp.h" + +#include "mpc85xx.h" #undef DEBUG #ifdef DEBUG @@ -153,30 +156,7 @@ static int mpc8568_mds_phy_fixups(struct phy_device *phydev) * Setup the architecture * */ -#ifdef CONFIG_SMP -extern void __init mpc85xx_smp_init(void); -#endif - #ifdef CONFIG_QUICC_ENGINE -static struct of_device_id mpc85xx_qe_ids[] __initdata = { - { .type = "qe", }, - { .compatible = "fsl,qe", }, - { }, -}; - -static void __init mpc85xx_publish_qe_devices(void) -{ - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!of_device_is_available(np)) { - of_node_put(np); - return; - } - - of_platform_bus_probe(NULL, mpc85xx_qe_ids, NULL); -} - static void __init mpc85xx_mds_reset_ucc_phys(void) { struct device_node *np; @@ -347,7 +327,6 @@ static void __init mpc85xx_mds_qeic_init(void) of_node_put(np); } #else -static void __init mpc85xx_publish_qe_devices(void) { } static void __init mpc85xx_mds_qe_init(void) { } static void __init mpc85xx_mds_qeic_init(void) { } #endif /* CONFIG_QUICC_ENGINE */ @@ -381,9 +360,7 @@ static void __init mpc85xx_mds_setup_arch(void) } #endif -#ifdef CONFIG_SMP mpc85xx_smp_init(); -#endif mpc85xx_mds_qe_init(); @@ -429,24 +406,11 @@ machine_arch_initcall(mpc8568_mds, board_fixups); machine_arch_initcall(mpc8569_mds, board_fixups); static struct of_device_id mpc85xx_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - { .compatible = "fsl,rapidio-delta", }, { .compatible = "fsl,mpc8548-guts", }, { .compatible = "gpio-leds", }, {}, }; -static struct of_device_id p1021_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - {}, -}; - static int __init mpc85xx_publish_devices(void) { if (machine_is(mpc8568_mds)) @@ -454,23 +418,15 @@ static int __init mpc85xx_publish_devices(void) if (machine_is(mpc8569_mds)) simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio"); + mpc85xx_common_publish_devices(); of_platform_bus_probe(NULL, mpc85xx_ids, NULL); - mpc85xx_publish_qe_devices(); - - return 0; -} - -static int __init p1021_publish_devices(void) -{ - of_platform_bus_probe(NULL, p1021_ids, NULL); - mpc85xx_publish_qe_devices(); return 0; } machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices); machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices); -machine_device_initcall(p1021_mds, p1021_publish_devices); +machine_device_initcall(p1021_mds, mpc85xx_common_publish_devices); machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier); machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier); @@ -478,26 +434,11 @@ machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier); static void __init mpc85xx_mds_pic_init(void) { - struct mpic *mpic; - struct resource r; - struct device_node *np = NULL; - - np = of_find_node_by_type(NULL, "open-pic"); - if (!np) - return; - - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_ERR "Failed to map mpic register space\n"); - of_node_put(np); - return; - } - - mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | + struct mpic *mpic = mpic_alloc(NULL, 0, + MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); - of_node_put(np); mpic_init(mpic); mpc85xx_mds_qeic_init(); diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c index f5ff9110c97e..ccf520e890be 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c @@ -29,6 +29,9 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> +#include "smp.h" + +#include "mpc85xx.h" #undef DEBUG @@ -42,49 +45,28 @@ void __init mpc85xx_rdb_pic_init(void) { struct mpic *mpic; - struct resource r; - struct device_node *np; unsigned long root = of_get_flat_dt_root(); - np = of_find_node_by_type(NULL, "open-pic"); - if (np == NULL) { - printk(KERN_ERR "Could not find open-pic node\n"); - return; - } - - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_ERR "Failed to map mpic register space\n"); - of_node_put(np); - return; - } - if (of_flat_dt_is_compatible(root, "fsl,MPC85XXRDB-CAMP")) { - mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | + mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); } else { - mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | + mpic = mpic_alloc(NULL, 0, + MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); } BUG_ON(mpic == NULL); - of_node_put(np); - mpic_init(mpic); - } /* * Setup the architecture */ -#ifdef CONFIG_SMP -extern void __init mpc85xx_smp_init(void); -#endif static void __init mpc85xx_rdb_setup_arch(void) { #ifdef CONFIG_PCI @@ -102,27 +84,12 @@ static void __init mpc85xx_rdb_setup_arch(void) #endif -#ifdef CONFIG_SMP mpc85xx_smp_init(); -#endif - printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n"); } -static struct of_device_id __initdata mpc85xxrdb_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - {}, -}; - -static int __init mpc85xxrdb_publish_devices(void) -{ - return of_platform_bus_probe(NULL, mpc85xxrdb_ids, NULL); -} -machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices); -machine_device_initcall(p1020_rdb, mpc85xxrdb_publish_devices); +machine_device_initcall(p2020_rdb, mpc85xx_common_publish_devices); +machine_device_initcall(p1020_rdb, mpc85xx_common_publish_devices); /* * Called very early, device-tree isn't unflattened diff --git a/arch/powerpc/platforms/85xx/p1010rdb.c b/arch/powerpc/platforms/85xx/p1010rdb.c index d7387fa7f534..538bc3f57e9d 100644 --- a/arch/powerpc/platforms/85xx/p1010rdb.c +++ b/arch/powerpc/platforms/85xx/p1010rdb.c @@ -28,33 +28,18 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> +#include "mpc85xx.h" + void __init p1010_rdb_pic_init(void) { - struct mpic *mpic; - struct resource r; - struct device_node *np; - - np = of_find_node_by_type(NULL, "open-pic"); - if (np == NULL) { - printk(KERN_ERR "Could not find open-pic node\n"); - return; - } - - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_ERR "Failed to map mpic register space\n"); - of_node_put(np); - return; - } - - mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET | - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, + struct mpic *mpic = mpic_alloc(NULL, 0, + MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | + MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); - of_node_put(np); mpic_init(mpic); - } @@ -81,18 +66,7 @@ static void __init p1010_rdb_setup_arch(void) printk(KERN_INFO "P1010 RDB board from Freescale Semiconductor\n"); } -static struct of_device_id __initdata p1010rdb_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - {}, -}; - -static int __init p1010rdb_publish_devices(void) -{ - return of_platform_bus_probe(NULL, p1010rdb_ids, NULL); -} -machine_device_initcall(p1010_rdb, p1010rdb_publish_devices); +machine_device_initcall(p1010_rdb, mpc85xx_common_publish_devices); machine_arch_initcall(p1010_rdb, swiotlb_setup_bus_notifier); /* diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index fda15716fada..bb3d84f4046f 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -26,6 +26,9 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> #include <asm/fsl_guts.h> +#include "smp.h" + +#include "mpc85xx.h" #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) @@ -238,38 +241,15 @@ p1022ds_valid_monitor_port(enum fsl_diu_monitor_port port) void __init p1022_ds_pic_init(void) { - struct mpic *mpic; - struct resource r; - struct device_node *np; - - np = of_find_node_by_type(NULL, "open-pic"); - if (!np) { - pr_err("Could not find open-pic node\n"); - return; - } - - if (of_address_to_resource(np, 0, &r)) { - pr_err("Failed to map mpic register space\n"); - of_node_put(np); - return; - } - - mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | + struct mpic *mpic = mpic_alloc(NULL, 0, + MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); - BUG_ON(mpic == NULL); - of_node_put(np); - mpic_init(mpic); } -#ifdef CONFIG_SMP -void __init mpc85xx_smp_init(void); -#endif - /* * Setup the architecture */ @@ -309,9 +289,7 @@ static void __init p1022_ds_setup_arch(void) diu_ops.valid_monitor_port = p1022ds_valid_monitor_port; #endif -#ifdef CONFIG_SMP mpc85xx_smp_init(); -#endif #ifdef CONFIG_SWIOTLB if (memblock_end_of_DRAM() > max) { @@ -325,10 +303,6 @@ static void __init p1022_ds_setup_arch(void) } static struct of_device_id __initdata p1022_ds_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, /* So that the DMA channel nodes can be probed individually: */ { .compatible = "fsl,eloplus-dma", }, {}, @@ -336,6 +310,7 @@ static struct of_device_id __initdata p1022_ds_ids[] = { static int __init p1022_ds_publish_devices(void) { + mpc85xx_common_publish_devices(); return of_platform_bus_probe(NULL, p1022_ds_ids, NULL); } machine_device_initcall(p1022_ds, p1022_ds_publish_devices); diff --git a/arch/powerpc/platforms/85xx/p1023_rds.c b/arch/powerpc/platforms/85xx/p1023_rds.c index 835e0b335bfa..d951e7027bb6 100644 --- a/arch/powerpc/platforms/85xx/p1023_rds.c +++ b/arch/powerpc/platforms/85xx/p1023_rds.c @@ -30,19 +30,18 @@ #include <asm/prom.h> #include <asm/udbg.h> #include <asm/mpic.h> +#include "smp.h" #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> +#include "mpc85xx.h" + /* ************************************************************************ * * Setup the architecture * */ -#ifdef CONFIG_SMP -void __init mpc85xx_smp_init(void); -#endif - static void __init mpc85xx_rds_setup_arch(void) { struct device_node *np; @@ -87,53 +86,19 @@ static void __init mpc85xx_rds_setup_arch(void) fsl_add_bridge(np, 0); #endif -#ifdef CONFIG_SMP mpc85xx_smp_init(); -#endif -} - -static struct of_device_id p1023_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - {}, -}; - - -static int __init p1023_publish_devices(void) -{ - of_platform_bus_probe(NULL, p1023_ids, NULL); - - return 0; } -machine_device_initcall(p1023_rds, p1023_publish_devices); +machine_device_initcall(p1023_rds, mpc85xx_common_publish_devices); static void __init mpc85xx_rds_pic_init(void) { - struct mpic *mpic; - struct resource r; - struct device_node *np = NULL; - - np = of_find_node_by_type(NULL, "open-pic"); - if (!np) { - printk(KERN_ERR "Could not find open-pic node\n"); - return; - } - - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_ERR "Failed to map mpic register space\n"); - of_node_put(np); - return; - } - - mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | + struct mpic *mpic = mpic_alloc(NULL, 0, + MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); - of_node_put(np); mpic_init(mpic); } diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c index 14632a971225..184a50784617 100644 --- a/arch/powerpc/platforms/85xx/sbc8548.c +++ b/arch/powerpc/platforms/85xx/sbc8548.c @@ -48,35 +48,16 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> +#include "mpc85xx.h" + static int sbc_rev; static void __init sbc8548_pic_init(void) { - struct mpic *mpic; - struct resource r; - struct device_node *np = NULL; - - np = of_find_node_by_type(np, "open-pic"); - - if (np == NULL) { - printk(KERN_ERR "Could not find open-pic node\n"); - return; - } - - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_ERR "Failed to map mpic register space\n"); - of_node_put(np); - return; - } - - mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + struct mpic *mpic = mpic_alloc(NULL, 0, + MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); - - /* Return the mpic node */ - of_node_put(np); - mpic_init(mpic); } @@ -149,21 +130,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m) seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); } -static struct of_device_id __initdata of_bus_ids[] = { - { .name = "soc", }, - { .type = "soc", }, - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - {}, -}; - -static int __init declare_of_platform_devices(void) -{ - of_platform_bus_probe(NULL, of_bus_ids, NULL); - - return 0; -} -machine_device_initcall(sbc8548, declare_of_platform_devices); +machine_device_initcall(sbc8548, mpc85xx_common_publish_devices); /* * Called very early, device-tree isn't unflattened diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c index cebd786dc334..940752e93051 100644 --- a/arch/powerpc/platforms/85xx/sbc8560.c +++ b/arch/powerpc/platforms/85xx/sbc8560.c @@ -32,68 +32,22 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> +#include "mpc85xx.h" + #ifdef CONFIG_CPM2 #include <asm/cpm2.h> #include <sysdev/cpm2_pic.h> #endif -#ifdef CONFIG_CPM2 - -static void cpm2_cascade(unsigned int irq, struct irq_desc *desc) -{ - struct irq_chip *chip = irq_desc_get_chip(desc); - int cascade_irq; - - while ((cascade_irq = cpm2_get_irq()) >= 0) - generic_handle_irq(cascade_irq); - - chip->irq_eoi(&desc->irq_data); -} - -#endif /* CONFIG_CPM2 */ - static void __init sbc8560_pic_init(void) { - struct mpic *mpic; - struct resource r; - struct device_node *np = NULL; -#ifdef CONFIG_CPM2 - int irq; -#endif - - np = of_find_node_by_type(np, "open-pic"); - if (!np) { - printk(KERN_ERR "Could not find open-pic node\n"); - return; - } - - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_ERR "Could not map mpic register space\n"); - of_node_put(np); - return; - } - - mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + struct mpic *mpic = mpic_alloc(NULL, 0, + MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); - of_node_put(np); - mpic_init(mpic); -#ifdef CONFIG_CPM2 - /* Setup CPM2 PIC */ - np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic"); - if (np == NULL) { - printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n"); - return; - } - irq = irq_of_parse_and_map(np, 0); - - cpm2_pic_init(np); - of_node_put(np); - irq_set_chained_handler(irq, cpm2_cascade); -#endif + mpc85xx_cpm2_pic_init(); } /* @@ -208,23 +162,7 @@ static void sbc8560_show_cpuinfo(struct seq_file *m) seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); } -static struct of_device_id __initdata of_bus_ids[] = { - { .name = "soc", }, - { .type = "soc", }, - { .name = "cpm", }, - { .name = "localbus", }, - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - {}, -}; - -static int __init declare_of_platform_devices(void) -{ - of_platform_bus_probe(NULL, of_bus_ids, NULL); - - return 0; -} -machine_device_initcall(sbc8560, declare_of_platform_devices); +machine_device_initcall(sbc8560, mpc85xx_common_publish_devices); /* * Called very early, device-tree isn't unflattened diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index 2df4785ffd4e..ff4249044a3c 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -27,6 +27,7 @@ #include <sysdev/fsl_soc.h> #include <sysdev/mpic.h> +#include "smp.h" extern void __early_start(void); diff --git a/arch/powerpc/platforms/85xx/smp.h b/arch/powerpc/platforms/85xx/smp.h new file mode 100644 index 000000000000..e2b44933ff19 --- /dev/null +++ b/arch/powerpc/platforms/85xx/smp.h @@ -0,0 +1,15 @@ +#ifndef POWERPC_85XX_SMP_H_ +#define POWERPC_85XX_SMP_H_ 1 + +#include <linux/init.h> + +#ifdef CONFIG_SMP +void __init mpc85xx_smp_init(void); +#else +static inline void mpc85xx_smp_init(void) +{ + /* Nothing to do */ +} +#endif + +#endif /* not POWERPC_85XX_SMP_H_ */ diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c index 747d8fb3ab82..18f635906b27 100644 --- a/arch/powerpc/platforms/85xx/socrates.c +++ b/arch/powerpc/platforms/85xx/socrates.c @@ -41,32 +41,17 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> +#include "mpc85xx.h" #include "socrates_fpga_pic.h" static void __init socrates_pic_init(void) { - struct mpic *mpic; - struct resource r; struct device_node *np; - np = of_find_node_by_type(NULL, "open-pic"); - if (!np) { - printk(KERN_ERR "Could not find open-pic node\n"); - return; - } - - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_ERR "Could not map mpic register space\n"); - of_node_put(np); - return; - } - - mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + struct mpic *mpic = mpic_alloc(NULL, 0, + MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); - of_node_put(np); - mpic_init(mpic); np = of_find_compatible_node(NULL, NULL, "abb,socrates-fpga-pic"); @@ -96,17 +81,7 @@ static void __init socrates_setup_arch(void) #endif } -static struct of_device_id __initdata socrates_of_bus_ids[] = { - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - {}, -}; - -static int __init socrates_publish_devices(void) -{ - return of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL); -} -machine_device_initcall(socrates, socrates_publish_devices); +machine_device_initcall(socrates, mpc85xx_common_publish_devices); /* * Called very early, device-tree isn't unflattened diff --git a/arch/powerpc/platforms/85xx/stx_gp3.c b/arch/powerpc/platforms/85xx/stx_gp3.c index 5387e9f06bdb..e9e5234b4e76 100644 --- a/arch/powerpc/platforms/85xx/stx_gp3.c +++ b/arch/powerpc/platforms/85xx/stx_gp3.c @@ -40,70 +40,21 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> +#include "mpc85xx.h" + #ifdef CONFIG_CPM2 #include <asm/cpm2.h> -#include <sysdev/cpm2_pic.h> - -static void cpm2_cascade(unsigned int irq, struct irq_desc *desc) -{ - struct irq_chip *chip = irq_desc_get_chip(desc); - int cascade_irq; - - while ((cascade_irq = cpm2_get_irq()) >= 0) - generic_handle_irq(cascade_irq); - - chip->irq_eoi(&desc->irq_data); -} #endif /* CONFIG_CPM2 */ static void __init stx_gp3_pic_init(void) { - struct mpic *mpic; - struct resource r; - struct device_node *np; -#ifdef CONFIG_CPM2 - int irq; -#endif - - np = of_find_node_by_type(NULL, "open-pic"); - if (!np) { - printk(KERN_ERR "Could not find open-pic node\n"); - return; - } - - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_ERR "Could not map mpic register space\n"); - of_node_put(np); - return; - } - - mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + struct mpic *mpic = mpic_alloc(NULL, 0, + MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); - of_node_put(np); - mpic_init(mpic); -#ifdef CONFIG_CPM2 - /* Setup CPM2 PIC */ - np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic"); - if (np == NULL) { - printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n"); - return; - } - irq = irq_of_parse_and_map(np, 0); - - if (irq == NO_IRQ) { - of_node_put(np); - printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n"); - return; - } - - cpm2_pic_init(np); - of_node_put(np); - irq_set_chained_handler(irq, cpm2_cascade); -#endif + mpc85xx_cpm2_pic_init(); } /* @@ -144,19 +95,7 @@ static void stx_gp3_show_cpuinfo(struct seq_file *m) seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); } -static struct of_device_id __initdata of_bus_ids[] = { - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - {}, -}; - -static int __init declare_of_platform_devices(void) -{ - of_platform_bus_probe(NULL, of_bus_ids, NULL); - - return 0; -} -machine_device_initcall(stx_gp3, declare_of_platform_devices); +machine_device_initcall(stx_gp3, mpc85xx_common_publish_devices); /* * Called very early, device-tree isn't unflattened diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c index 325de772725a..bf7c89fb75bb 100644 --- a/arch/powerpc/platforms/85xx/tqm85xx.c +++ b/arch/powerpc/platforms/85xx/tqm85xx.c @@ -38,70 +38,21 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> +#include "mpc85xx.h" + #ifdef CONFIG_CPM2 #include <asm/cpm2.h> -#include <sysdev/cpm2_pic.h> - -static void cpm2_cascade(unsigned int irq, struct irq_desc *desc) -{ - struct irq_chip *chip = irq_desc_get_chip(desc); - int cascade_irq; - - while ((cascade_irq = cpm2_get_irq()) >= 0) - generic_handle_irq(cascade_irq); - - chip->irq_eoi(&desc->irq_data); -} #endif /* CONFIG_CPM2 */ static void __init tqm85xx_pic_init(void) { - struct mpic *mpic; - struct resource r; - struct device_node *np; -#ifdef CONFIG_CPM2 - int irq; -#endif - - np = of_find_node_by_type(NULL, "open-pic"); - if (!np) { - printk(KERN_ERR "Could not find open-pic node\n"); - return; - } - - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_ERR "Could not map mpic register space\n"); - of_node_put(np); - return; - } - - mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + struct mpic *mpic = mpic_alloc(NULL, 0, + MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); - of_node_put(np); - mpic_init(mpic); -#ifdef CONFIG_CPM2 - /* Setup CPM2 PIC */ - np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic"); - if (np == NULL) { - printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n"); - return; - } - irq = irq_of_parse_and_map(np, 0); - - if (irq == NO_IRQ) { - of_node_put(np); - printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n"); - return; - } - - cpm2_pic_init(np); - of_node_put(np); - irq_set_chained_handler(irq, cpm2_cascade); -#endif + mpc85xx_cpm2_pic_init(); } /* @@ -173,19 +124,7 @@ static void __init tqm85xx_ti1520_fixup(struct pci_dev *pdev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520, tqm85xx_ti1520_fixup); -static struct of_device_id __initdata of_bus_ids[] = { - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - {}, -}; - -static int __init declare_of_platform_devices(void) -{ - of_platform_bus_probe(NULL, of_bus_ids, NULL); - - return 0; -} -machine_device_initcall(tqm85xx, declare_of_platform_devices); +machine_device_initcall(tqm85xx, mpc85xx_common_publish_devices); static const char *board[] __initdata = { "tqc,tqm8540", diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c index a9dc5e795123..3a69f8b77de6 100644 --- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c +++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c @@ -32,6 +32,9 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> +#include "smp.h" + +#include "mpc85xx.h" /* A few bit definitions needed for fixups on some boards */ #define MPC85xx_L2CTL_L2E 0x80000000 /* L2 enable */ @@ -40,29 +43,11 @@ void __init xes_mpc85xx_pic_init(void) { - struct mpic *mpic; - struct resource r; - struct device_node *np; - - np = of_find_node_by_type(NULL, "open-pic"); - if (np == NULL) { - printk(KERN_ERR "Could not find open-pic node\n"); - return; - } - - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_ERR "Failed to map mpic register space\n"); - of_node_put(np); - return; - } - - mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | + struct mpic *mpic = mpic_alloc(NULL, 0, + MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); - of_node_put(np); - mpic_init(mpic); } @@ -136,9 +121,6 @@ static int primary_phb_addr; /* * Setup the architecture */ -#ifdef CONFIG_SMP -extern void __init mpc85xx_smp_init(void); -#endif static void __init xes_mpc85xx_setup_arch(void) { #ifdef CONFIG_PCI @@ -172,26 +154,12 @@ static void __init xes_mpc85xx_setup_arch(void) } #endif -#ifdef CONFIG_SMP mpc85xx_smp_init(); -#endif } -static struct of_device_id __initdata xes_mpc85xx_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - {}, -}; - -static int __init xes_mpc85xx_publish_devices(void) -{ - return of_platform_bus_probe(NULL, xes_mpc85xx_ids, NULL); -} -machine_device_initcall(xes_mpc8572, xes_mpc85xx_publish_devices); -machine_device_initcall(xes_mpc8548, xes_mpc85xx_publish_devices); -machine_device_initcall(xes_mpc8540, xes_mpc85xx_publish_devices); +machine_device_initcall(xes_mpc8572, mpc85xx_common_publish_devices); +machine_device_initcall(xes_mpc8548, mpc85xx_common_publish_devices); +machine_device_initcall(xes_mpc8540, mpc85xx_common_publish_devices); /* * Called very early, device-tree isn't unflattened diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index b11c3535f350..569262ca499a 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -161,7 +161,7 @@ mpc86xx_time_init(void) static __initdata struct of_device_id of_bus_ids[] = { { .compatible = "simple-bus", }, - { .compatible = "fsl,rapidio-delta", }, + { .compatible = "fsl,srio", }, { .compatible = "gianfar", }, {}, }; diff --git a/arch/powerpc/platforms/86xx/pic.c b/arch/powerpc/platforms/86xx/pic.c index 8ef8960abda6..52bbfa031531 100644 --- a/arch/powerpc/platforms/86xx/pic.c +++ b/arch/powerpc/platforms/86xx/pic.c @@ -31,26 +31,16 @@ static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc) void __init mpc86xx_init_irq(void) { - struct mpic *mpic; - struct device_node *np; - struct resource res; #ifdef CONFIG_PPC_I8259 + struct device_node *np; struct device_node *cascade_node = NULL; int cascade_irq; #endif - /* Determine PIC address. */ - np = of_find_node_by_type(NULL, "open-pic"); - if (np == NULL) - return; - of_address_to_resource(np, 0, &res); - - mpic = mpic_alloc(np, res.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | - MPIC_SINGLE_DEST_CPU, + struct mpic *mpic = mpic_alloc(NULL, 0, + MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | + MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, 0, 256, " MPIC "); - of_node_put(np); BUG_ON(mpic == NULL); mpic_init(mpic); diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 3fe6d927ad70..0cfb46d54b8c 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -175,9 +175,6 @@ config PPC_INDIRECT_MMIO config PPC_IO_WORKAROUNDS bool -config GENERIC_IOMAP - bool - source "drivers/cpufreq/Kconfig" menu "CPU Frequency drivers" @@ -211,6 +208,12 @@ config PPC_PASEMI_CPUFREQ endmenu +menu "CPUIdle driver" + +source "drivers/cpuidle/Kconfig" + +endmenu + config PPC601_SYNC_FIX bool "Workarounds for PPC601 bugs" depends on 6xx && (PPC_PREP || PPC_PMAC) diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index fbecae0fbb49..425db18580a2 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -174,7 +174,6 @@ config BOOKE config FSL_BOOKE bool depends on (E200 || E500) && PPC32 - select SYS_SUPPORTS_HUGETLBFS if PHYS_64BIT default y # this is for common code between PPC32 & PPC64 FSL BOOKE @@ -182,6 +181,7 @@ config PPC_FSL_BOOK3E bool select FSL_EMB_PERFMON select PPC_SMP_MUXED_IPI + select SYS_SUPPORTS_HUGETLBFS if PHYS_64BIT || PPC64 default y if FSL_BOOKE config PTE_64BIT @@ -236,7 +236,7 @@ config VSX config PPC_ICSWX bool "Support for PowerPC icswx coprocessor instruction" - depends on POWER4 + depends on POWER4 || PPC_A2 default n ---help--- @@ -252,6 +252,25 @@ config PPC_ICSWX If in doubt, say N here. +config PPC_ICSWX_PID + bool "icswx requires direct PID management" + depends on PPC_ICSWX && POWER4 + default y + ---help--- + The PID register in server is used explicitly for ICSWX. In + embedded systems PID managment is done by the system. + +config PPC_ICSWX_USE_SIGILL + bool "Should a bad CT cause a SIGILL?" + depends on PPC_ICSWX + default n + ---help--- + Should a bad CT used for "non-record form ICSWX" cause an + illegal intruction signal or should it be silent as + architected. + + If in doubt, say N here. + config SPE bool "SPE Support" depends on E200 || (E500 && !PPC_E500MC) @@ -290,7 +309,7 @@ config PPC_BOOK3E_MMU config PPC_MM_SLICES bool - default y if (PPC64 && HUGETLB_PAGE) || (PPC_STD_MMU_64 && PPC_64K_PAGES) + default y if (!PPC_FSL_BOOK3E && PPC64 && HUGETLB_PAGE) || (PPC_STD_MMU_64 && PPC_64K_PAGES) default n config VIRT_CPU_ACCOUNTING diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c index 4d4c8c169124..94560db788bf 100644 --- a/arch/powerpc/platforms/cell/cbe_thermal.c +++ b/arch/powerpc/platforms/cell/cbe_thermal.c @@ -46,7 +46,7 @@ */ #include <linux/module.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/kernel.h> #include <linux/cpu.h> #include <asm/spu.h> @@ -59,8 +59,8 @@ #define TEMP_MIN 65 #define TEMP_MAX 125 -#define SYSDEV_PREFIX_ATTR(_prefix,_name,_mode) \ -struct sysdev_attribute attr_ ## _prefix ## _ ## _name = { \ +#define DEVICE_PREFIX_ATTR(_prefix,_name,_mode) \ +struct device_attribute attr_ ## _prefix ## _ ## _name = { \ .attr = { .name = __stringify(_name), .mode = _mode }, \ .show = _prefix ## _show_ ## _name, \ .store = _prefix ## _store_ ## _name, \ @@ -76,36 +76,36 @@ static inline u8 temp_to_reg(u8 temp) return ((temp - TEMP_MIN) >> 1) & 0x3f; } -static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev) +static struct cbe_pmd_regs __iomem *get_pmd_regs(struct device *dev) { struct spu *spu; - spu = container_of(sysdev, struct spu, sysdev); + spu = container_of(dev, struct spu, dev); return cbe_get_pmd_regs(spu_devnode(spu)); } /* returns the value for a given spu in a given register */ -static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iomem *reg) +static u8 spu_read_register_value(struct device *dev, union spe_reg __iomem *reg) { union spe_reg value; struct spu *spu; - spu = container_of(sysdev, struct spu, sysdev); + spu = container_of(dev, struct spu, dev); value.val = in_be64(®->val); return value.spe[spu->spe_id]; } -static ssize_t spu_show_temp(struct sys_device *sysdev, struct sysdev_attribute *attr, +static ssize_t spu_show_temp(struct device *dev, struct device_attribute *attr, char *buf) { u8 value; struct cbe_pmd_regs __iomem *pmd_regs; - pmd_regs = get_pmd_regs(sysdev); + pmd_regs = get_pmd_regs(dev); - value = spu_read_register_value(sysdev, &pmd_regs->ts_ctsr1); + value = spu_read_register_value(dev, &pmd_regs->ts_ctsr1); return sprintf(buf, "%d\n", reg_to_temp(value)); } @@ -147,48 +147,48 @@ static ssize_t store_throttle(struct cbe_pmd_regs __iomem *pmd_regs, const char return size; } -static ssize_t spu_show_throttle_end(struct sys_device *sysdev, - struct sysdev_attribute *attr, char *buf) +static ssize_t spu_show_throttle_end(struct device *dev, + struct device_attribute *attr, char *buf) { - return show_throttle(get_pmd_regs(sysdev), buf, 0); + return show_throttle(get_pmd_regs(dev), buf, 0); } -static ssize_t spu_show_throttle_begin(struct sys_device *sysdev, - struct sysdev_attribute *attr, char *buf) +static ssize_t spu_show_throttle_begin(struct device *dev, + struct device_attribute *attr, char *buf) { - return show_throttle(get_pmd_regs(sysdev), buf, 8); + return show_throttle(get_pmd_regs(dev), buf, 8); } -static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev, - struct sysdev_attribute *attr, char *buf) +static ssize_t spu_show_throttle_full_stop(struct device *dev, + struct device_attribute *attr, char *buf) { - return show_throttle(get_pmd_regs(sysdev), buf, 16); + return show_throttle(get_pmd_regs(dev), buf, 16); } -static ssize_t spu_store_throttle_end(struct sys_device *sysdev, - struct sysdev_attribute *attr, const char *buf, size_t size) +static ssize_t spu_store_throttle_end(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) { - return store_throttle(get_pmd_regs(sysdev), buf, size, 0); + return store_throttle(get_pmd_regs(dev), buf, size, 0); } -static ssize_t spu_store_throttle_begin(struct sys_device *sysdev, - struct sysdev_attribute *attr, const char *buf, size_t size) +static ssize_t spu_store_throttle_begin(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) { - return store_throttle(get_pmd_regs(sysdev), buf, size, 8); + return store_throttle(get_pmd_regs(dev), buf, size, 8); } -static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev, - struct sysdev_attribute *attr, const char *buf, size_t size) +static ssize_t spu_store_throttle_full_stop(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) { - return store_throttle(get_pmd_regs(sysdev), buf, size, 16); + return store_throttle(get_pmd_regs(dev), buf, size, 16); } -static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos) +static ssize_t ppe_show_temp(struct device *dev, char *buf, int pos) { struct cbe_pmd_regs __iomem *pmd_regs; u64 value; - pmd_regs = cbe_get_cpu_pmd_regs(sysdev->id); + pmd_regs = cbe_get_cpu_pmd_regs(dev->id); value = in_be64(&pmd_regs->ts_ctsr2); value = (value >> pos) & 0x3f; @@ -199,64 +199,64 @@ static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos) /* shows the temperature of the DTS on the PPE, * located near the linear thermal sensor */ -static ssize_t ppe_show_temp0(struct sys_device *sysdev, - struct sysdev_attribute *attr, char *buf) +static ssize_t ppe_show_temp0(struct device *dev, + struct device_attribute *attr, char *buf) { - return ppe_show_temp(sysdev, buf, 32); + return ppe_show_temp(dev, buf, 32); } /* shows the temperature of the second DTS on the PPE */ -static ssize_t ppe_show_temp1(struct sys_device *sysdev, - struct sysdev_attribute *attr, char *buf) +static ssize_t ppe_show_temp1(struct device *dev, + struct device_attribute *attr, char *buf) { - return ppe_show_temp(sysdev, buf, 0); + return ppe_show_temp(dev, buf, 0); } -static ssize_t ppe_show_throttle_end(struct sys_device *sysdev, - struct sysdev_attribute *attr, char *buf) +static ssize_t ppe_show_throttle_end(struct device *dev, + struct device_attribute *attr, char *buf) { - return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 32); + return show_throttle(cbe_get_cpu_pmd_regs(dev->id), buf, 32); } -static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev, - struct sysdev_attribute *attr, char *buf) +static ssize_t ppe_show_throttle_begin(struct device *dev, + struct device_attribute *attr, char *buf) { - return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 40); + return show_throttle(cbe_get_cpu_pmd_regs(dev->id), buf, 40); } -static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev, - struct sysdev_attribute *attr, char *buf) +static ssize_t ppe_show_throttle_full_stop(struct device *dev, + struct device_attribute *attr, char *buf) { - return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 48); + return show_throttle(cbe_get_cpu_pmd_regs(dev->id), buf, 48); } -static ssize_t ppe_store_throttle_end(struct sys_device *sysdev, - struct sysdev_attribute *attr, const char *buf, size_t size) +static ssize_t ppe_store_throttle_end(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) { - return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 32); + return store_throttle(cbe_get_cpu_pmd_regs(dev->id), buf, size, 32); } -static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev, - struct sysdev_attribute *attr, const char *buf, size_t size) +static ssize_t ppe_store_throttle_begin(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) { - return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 40); + return store_throttle(cbe_get_cpu_pmd_regs(dev->id), buf, size, 40); } -static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev, - struct sysdev_attribute *attr, const char *buf, size_t size) +static ssize_t ppe_store_throttle_full_stop(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) { - return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 48); + return store_throttle(cbe_get_cpu_pmd_regs(dev->id), buf, size, 48); } -static struct sysdev_attribute attr_spu_temperature = { +static struct device_attribute attr_spu_temperature = { .attr = {.name = "temperature", .mode = 0400 }, .show = spu_show_temp, }; -static SYSDEV_PREFIX_ATTR(spu, throttle_end, 0600); -static SYSDEV_PREFIX_ATTR(spu, throttle_begin, 0600); -static SYSDEV_PREFIX_ATTR(spu, throttle_full_stop, 0600); +static DEVICE_PREFIX_ATTR(spu, throttle_end, 0600); +static DEVICE_PREFIX_ATTR(spu, throttle_begin, 0600); +static DEVICE_PREFIX_ATTR(spu, throttle_full_stop, 0600); static struct attribute *spu_attributes[] = { @@ -272,19 +272,19 @@ static struct attribute_group spu_attribute_group = { .attrs = spu_attributes, }; -static struct sysdev_attribute attr_ppe_temperature0 = { +static struct device_attribute attr_ppe_temperature0 = { .attr = {.name = "temperature0", .mode = 0400 }, .show = ppe_show_temp0, }; -static struct sysdev_attribute attr_ppe_temperature1 = { +static struct device_attribute attr_ppe_temperature1 = { .attr = {.name = "temperature1", .mode = 0400 }, .show = ppe_show_temp1, }; -static SYSDEV_PREFIX_ATTR(ppe, throttle_end, 0600); -static SYSDEV_PREFIX_ATTR(ppe, throttle_begin, 0600); -static SYSDEV_PREFIX_ATTR(ppe, throttle_full_stop, 0600); +static DEVICE_PREFIX_ATTR(ppe, throttle_end, 0600); +static DEVICE_PREFIX_ATTR(ppe, throttle_begin, 0600); +static DEVICE_PREFIX_ATTR(ppe, throttle_full_stop, 0600); static struct attribute *ppe_attributes[] = { &attr_ppe_temperature0.attr, @@ -307,7 +307,7 @@ static int __init init_default_values(void) { int cpu; struct cbe_pmd_regs __iomem *pmd_regs; - struct sys_device *sysdev; + struct device *dev; union ppe_spe_reg tpr; union spe_reg str1; u64 str2; @@ -349,14 +349,14 @@ static int __init init_default_values(void) for_each_possible_cpu (cpu) { pr_debug("processing cpu %d\n", cpu); - sysdev = get_cpu_sysdev(cpu); + dev = get_cpu_device(cpu); - if (!sysdev) { - pr_info("invalid sysdev pointer for cbe_thermal\n"); + if (!dev) { + pr_info("invalid dev pointer for cbe_thermal\n"); return -EINVAL; } - pmd_regs = cbe_get_cpu_pmd_regs(sysdev->id); + pmd_regs = cbe_get_cpu_pmd_regs(dev->id); if (!pmd_regs) { pr_info("invalid CBE regs pointer for cbe_thermal\n"); @@ -379,8 +379,8 @@ static int __init thermal_init(void) int rc = init_default_values(); if (rc == 0) { - spu_add_sysdev_attr_group(&spu_attribute_group); - cpu_add_sysdev_attr_group(&ppe_attribute_group); + spu_add_dev_attr_group(&spu_attribute_group); + cpu_add_dev_attr_group(&ppe_attribute_group); } return rc; @@ -389,8 +389,8 @@ module_init(thermal_init); static void __exit thermal_exit(void) { - spu_remove_sysdev_attr_group(&spu_attribute_group); - cpu_remove_sysdev_attr_group(&ppe_attribute_group); + spu_remove_dev_attr_group(&spu_attribute_group); + cpu_remove_dev_attr_group(&ppe_attribute_group); } module_exit(thermal_exit); diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 592c3d51b817..ae9fc7bc17d6 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -1037,6 +1037,8 @@ static int __init cell_iommu_fixed_mapping_init(void) /* The fixed mapping is only supported on axon machines */ np = of_find_node_by_name(NULL, "axon"); + of_node_put(np); + if (!np) { pr_debug("iommu: fixed mapping disabled, no axons found\n"); return -1; diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index 0fc9b7256126..62002a7edfed 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -184,24 +184,10 @@ static int __init cell_publish_devices(void) } machine_subsys_initcall(cell, cell_publish_devices); -static void cell_mpic_cascade(unsigned int irq, struct irq_desc *desc) -{ - struct irq_chip *chip = irq_desc_get_chip(desc); - struct mpic *mpic = irq_desc_get_handler_data(desc); - unsigned int virq; - - virq = mpic_get_one_irq(mpic); - if (virq != NO_IRQ) - generic_handle_irq(virq); - - chip->irq_eoi(&desc->irq_data); -} - static void __init mpic_init_IRQ(void) { struct device_node *dn; struct mpic *mpic; - unsigned int virq; for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) { @@ -211,19 +197,10 @@ static void __init mpic_init_IRQ(void) /* The MPIC driver will get everything it needs from the * device-tree, just pass 0 to all arguments */ - mpic = mpic_alloc(dn, 0, 0, 0, 0, " MPIC "); + mpic = mpic_alloc(dn, 0, MPIC_SECONDARY, 0, 0, " MPIC "); if (mpic == NULL) continue; mpic_init(mpic); - - virq = irq_of_parse_and_map(dn, 0); - if (virq == NO_IRQ) - continue; - - printk(KERN_INFO "%s : hooking up to IRQ %d\n", - dn->full_name, virq); - irq_set_handler_data(virq, mpic); - irq_set_chained_handler(virq, cell_mpic_cascade); } } diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c index f5c5c762d5a3..4a255cf8cd17 100644 --- a/arch/powerpc/platforms/cell/smp.c +++ b/arch/powerpc/platforms/cell/smp.c @@ -23,7 +23,7 @@ #include <linux/spinlock.h> #include <linux/cache.h> #include <linux/err.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/cpu.h> #include <asm/ptrace.h> diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index e94d3ecdd8bb..8b1213993b10 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -519,31 +519,32 @@ void spu_init_channels(struct spu *spu) } EXPORT_SYMBOL_GPL(spu_init_channels); -static struct sysdev_class spu_sysdev_class = { +static struct bus_type spu_subsys = { .name = "spu", + .dev_name = "spu", }; -int spu_add_sysdev_attr(struct sysdev_attribute *attr) +int spu_add_dev_attr(struct device_attribute *attr) { struct spu *spu; mutex_lock(&spu_full_list_mutex); list_for_each_entry(spu, &spu_full_list, full_list) - sysdev_create_file(&spu->sysdev, attr); + device_create_file(&spu->dev, attr); mutex_unlock(&spu_full_list_mutex); return 0; } -EXPORT_SYMBOL_GPL(spu_add_sysdev_attr); +EXPORT_SYMBOL_GPL(spu_add_dev_attr); -int spu_add_sysdev_attr_group(struct attribute_group *attrs) +int spu_add_dev_attr_group(struct attribute_group *attrs) { struct spu *spu; int rc = 0; mutex_lock(&spu_full_list_mutex); list_for_each_entry(spu, &spu_full_list, full_list) { - rc = sysfs_create_group(&spu->sysdev.kobj, attrs); + rc = sysfs_create_group(&spu->dev.kobj, attrs); /* we're in trouble here, but try unwinding anyway */ if (rc) { @@ -552,7 +553,7 @@ int spu_add_sysdev_attr_group(struct attribute_group *attrs) list_for_each_entry_continue_reverse(spu, &spu_full_list, full_list) - sysfs_remove_group(&spu->sysdev.kobj, attrs); + sysfs_remove_group(&spu->dev.kobj, attrs); break; } } @@ -561,45 +562,45 @@ int spu_add_sysdev_attr_group(struct attribute_group *attrs) return rc; } -EXPORT_SYMBOL_GPL(spu_add_sysdev_attr_group); +EXPORT_SYMBOL_GPL(spu_add_dev_attr_group); -void spu_remove_sysdev_attr(struct sysdev_attribute *attr) +void spu_remove_dev_attr(struct device_attribute *attr) { struct spu *spu; mutex_lock(&spu_full_list_mutex); list_for_each_entry(spu, &spu_full_list, full_list) - sysdev_remove_file(&spu->sysdev, attr); + device_remove_file(&spu->dev, attr); mutex_unlock(&spu_full_list_mutex); } -EXPORT_SYMBOL_GPL(spu_remove_sysdev_attr); +EXPORT_SYMBOL_GPL(spu_remove_dev_attr); -void spu_remove_sysdev_attr_group(struct attribute_group *attrs) +void spu_remove_dev_attr_group(struct attribute_group *attrs) { struct spu *spu; mutex_lock(&spu_full_list_mutex); list_for_each_entry(spu, &spu_full_list, full_list) - sysfs_remove_group(&spu->sysdev.kobj, attrs); + sysfs_remove_group(&spu->dev.kobj, attrs); mutex_unlock(&spu_full_list_mutex); } -EXPORT_SYMBOL_GPL(spu_remove_sysdev_attr_group); +EXPORT_SYMBOL_GPL(spu_remove_dev_attr_group); -static int spu_create_sysdev(struct spu *spu) +static int spu_create_dev(struct spu *spu) { int ret; - spu->sysdev.id = spu->number; - spu->sysdev.cls = &spu_sysdev_class; - ret = sysdev_register(&spu->sysdev); + spu->dev.id = spu->number; + spu->dev.bus = &spu_subsys; + ret = device_register(&spu->dev); if (ret) { printk(KERN_ERR "Can't register SPU %d with sysfs\n", spu->number); return ret; } - sysfs_add_device_to_node(&spu->sysdev, spu->node); + sysfs_add_device_to_node(&spu->dev, spu->node); return 0; } @@ -635,7 +636,7 @@ static int __init create_spu(void *data) if (ret) goto out_destroy; - ret = spu_create_sysdev(spu); + ret = spu_create_dev(spu); if (ret) goto out_free_irqs; @@ -692,10 +693,10 @@ static unsigned long long spu_acct_time(struct spu *spu, } -static ssize_t spu_stat_show(struct sys_device *sysdev, - struct sysdev_attribute *attr, char *buf) +static ssize_t spu_stat_show(struct device *dev, + struct device_attribute *attr, char *buf) { - struct spu *spu = container_of(sysdev, struct spu, sysdev); + struct spu *spu = container_of(dev, struct spu, dev); return sprintf(buf, "%s %llu %llu %llu %llu " "%llu %llu %llu %llu %llu %llu %llu %llu\n", @@ -714,7 +715,7 @@ static ssize_t spu_stat_show(struct sys_device *sysdev, spu->stats.libassist); } -static SYSDEV_ATTR(stat, 0644, spu_stat_show, NULL); +static DEVICE_ATTR(stat, 0644, spu_stat_show, NULL); #ifdef CONFIG_KEXEC @@ -813,8 +814,8 @@ static int __init init_spu_base(void) if (!spu_management_ops) goto out; - /* create sysdev class for spus */ - ret = sysdev_class_register(&spu_sysdev_class); + /* create system subsystem for spus */ + ret = subsys_system_register(&spu_subsys, NULL); if (ret) goto out; @@ -823,7 +824,7 @@ static int __init init_spu_base(void) if (ret < 0) { printk(KERN_WARNING "%s: Error initializing spus\n", __func__); - goto out_unregister_sysdev_class; + goto out_unregister_subsys; } if (ret > 0) @@ -833,15 +834,15 @@ static int __init init_spu_base(void) xmon_register_spus(&spu_full_list); crash_register_spus(&spu_full_list); mutex_unlock(&spu_full_list_mutex); - spu_add_sysdev_attr(&attr_stat); + spu_add_dev_attr(&dev_attr_stat); register_syscore_ops(&spu_syscore_ops); spu_init_affinity(); return 0; - out_unregister_sysdev_class: - sysdev_class_unregister(&spu_sysdev_class); + out_unregister_subsys: + bus_unregister(&spu_subsys); out: return ret; } diff --git a/arch/powerpc/platforms/cell/spu_syscalls.c b/arch/powerpc/platforms/cell/spu_syscalls.c index 75530d99eda6..714bbfc3162c 100644 --- a/arch/powerpc/platforms/cell/spu_syscalls.c +++ b/arch/powerpc/platforms/cell/spu_syscalls.c @@ -65,8 +65,8 @@ static inline void spufs_calls_put(struct spufs_calls *calls) { } #endif /* CONFIG_SPU_FS_MODULE */ -asmlinkage long sys_spu_create(const char __user *name, - unsigned int flags, mode_t mode, int neighbor_fd) +SYSCALL_DEFINE4(spu_create, const char __user *, name, unsigned int, flags, + umode_t, mode, int, neighbor_fd) { long ret; struct file *neighbor; diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index e481f6b9a789..d4a094ca96f3 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -74,7 +74,6 @@ spufs_alloc_inode(struct super_block *sb) static void spufs_i_callback(struct rcu_head *head) { struct inode *inode = container_of(head, struct inode, i_rcu); - INIT_LIST_HEAD(&inode->i_dentry); kmem_cache_free(spufs_inode_cache, SPUFS_I(inode)); } @@ -92,7 +91,7 @@ spufs_init_once(void *p) } static struct inode * -spufs_new_inode(struct super_block *sb, int mode) +spufs_new_inode(struct super_block *sb, umode_t mode) { struct inode *inode; @@ -124,7 +123,7 @@ spufs_setattr(struct dentry *dentry, struct iattr *attr) static int spufs_new_file(struct super_block *sb, struct dentry *dentry, - const struct file_operations *fops, int mode, + const struct file_operations *fops, umode_t mode, size_t size, struct spu_context *ctx) { static const struct inode_operations spufs_file_iops = { @@ -194,7 +193,7 @@ static int spufs_rmdir(struct inode *parent, struct dentry *dir) } static int spufs_fill_dir(struct dentry *dir, - const struct spufs_tree_descr *files, int mode, + const struct spufs_tree_descr *files, umode_t mode, struct spu_context *ctx) { struct dentry *dentry, *tmp; @@ -264,7 +263,7 @@ EXPORT_SYMBOL_GPL(spufs_context_fops); static int spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags, - int mode) + umode_t mode) { int ret; struct inode *inode; @@ -447,7 +446,7 @@ spufs_set_affinity(unsigned int flags, struct spu_context *ctx, static int spufs_create_context(struct inode *inode, struct dentry *dentry, - struct vfsmount *mnt, int flags, int mode, + struct vfsmount *mnt, int flags, umode_t mode, struct file *aff_filp) { int ret; @@ -521,7 +520,7 @@ out: } static int -spufs_mkgang(struct inode *dir, struct dentry *dentry, int mode) +spufs_mkgang(struct inode *dir, struct dentry *dentry, umode_t mode) { int ret; struct inode *inode; @@ -584,7 +583,7 @@ out: static int spufs_create_gang(struct inode *inode, struct dentry *dentry, - struct vfsmount *mnt, int mode) + struct vfsmount *mnt, umode_t mode) { int ret; @@ -612,7 +611,7 @@ out: static struct file_system_type spufs_type; long spufs_create(struct path *path, struct dentry *dentry, - unsigned int flags, mode_t mode, struct file *filp) + unsigned int flags, umode_t mode, struct file *filp) { int ret; diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 099245f230b2..67852ade4c01 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -237,7 +237,7 @@ struct spufs_inode_info { struct spufs_tree_descr { const char *name; const struct file_operations *ops; - int mode; + umode_t mode; size_t size; }; @@ -249,7 +249,7 @@ extern const struct spufs_tree_descr spufs_dir_debug_contents[]; extern struct spufs_calls spufs_calls; long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *status); long spufs_create(struct path *nd, struct dentry *dentry, unsigned int flags, - mode_t mode, struct file *filp); + umode_t mode, struct file *filp); /* ELF coredump callbacks for writing SPU ELF notes */ extern int spufs_coredump_extra_notes_size(void); extern int spufs_coredump_extra_notes_write(struct file *file, loff_t *foffset); diff --git a/arch/powerpc/platforms/cell/spufs/syscalls.c b/arch/powerpc/platforms/cell/spufs/syscalls.c index 71a5b5207266..8591bb62d7fc 100644 --- a/arch/powerpc/platforms/cell/spufs/syscalls.c +++ b/arch/powerpc/platforms/cell/spufs/syscalls.c @@ -60,7 +60,7 @@ out: } static long do_spu_create(const char __user *pathname, unsigned int flags, - mode_t mode, struct file *neighbor) + umode_t mode, struct file *neighbor) { struct path path; struct dentry *dentry; diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 122786498419..f1f17bb2c33c 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -435,8 +435,7 @@ static void __init chrp_find_openpic(void) if (len > 1) isu_size = iranges[3]; - chrp_mpic = mpic_alloc(np, opaddr, MPIC_PRIMARY, - isu_size, 0, " MPIC "); + chrp_mpic = mpic_alloc(np, opaddr, 0, isu_size, 0, " MPIC "); if (chrp_mpic == NULL) { printk(KERN_ERR "Failed to allocate MPIC structure\n"); goto bail; diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c index 2e9bcf6444c8..9cfcf20c0560 100644 --- a/arch/powerpc/platforms/embedded6xx/holly.c +++ b/arch/powerpc/platforms/embedded6xx/holly.c @@ -148,30 +148,14 @@ static void __init holly_setup_arch(void) static void __init holly_init_IRQ(void) { struct mpic *mpic; - phys_addr_t mpic_paddr = 0; - struct device_node *tsi_pic; #ifdef CONFIG_PCI unsigned int cascade_pci_irq; struct device_node *tsi_pci; struct device_node *cascade_node = NULL; #endif - tsi_pic = of_find_node_by_type(NULL, "open-pic"); - if (tsi_pic) { - unsigned int size; - const void *prop = of_get_property(tsi_pic, "reg", &size); - mpic_paddr = of_translate_address(tsi_pic, prop); - } - - if (mpic_paddr == 0) { - printk(KERN_ERR "%s: No tsi108 PIC found !\n", __func__); - return; - } - - pr_debug("%s: tsi108 pic phys_addr = 0x%x\n", __func__, (u32) mpic_paddr); - - mpic = mpic_alloc(tsi_pic, mpic_paddr, - MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | + mpic = mpic_alloc(NULL, 0, + MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108, 24, NR_IRQS-4, /* num_sources used */ @@ -179,7 +163,7 @@ static void __init holly_init_IRQ(void) BUG_ON(mpic == NULL); - mpic_assign_isu(mpic, 0, mpic_paddr + 0x100); + mpic_assign_isu(mpic, 0, mpic->paddr + 0x100); mpic_init(mpic); @@ -204,7 +188,6 @@ static void __init holly_init_IRQ(void) #endif /* Configure MPIC outputs to CPU0 */ tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); - of_node_put(tsi_pic); } void holly_show_cpuinfo(struct seq_file *m) diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index 244f997de791..bcfad92c9cec 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -81,29 +81,19 @@ static void __init linkstation_setup_arch(void) static void __init linkstation_init_IRQ(void) { struct mpic *mpic; - struct device_node *dnp; - const u32 *prop; - int size; - phys_addr_t paddr; - dnp = of_find_node_by_type(NULL, "open-pic"); - if (dnp == NULL) - return; - - prop = of_get_property(dnp, "reg", &size); - paddr = (phys_addr_t)of_translate_address(dnp, prop); - - mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET, 4, 32, " EPIC "); + mpic = mpic_alloc(NULL, 0, MPIC_WANTS_RESET, + 4, 32, " EPIC "); BUG_ON(mpic == NULL); /* PCI IRQs */ - mpic_assign_isu(mpic, 0, paddr + 0x10200); + mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200); /* I2C */ - mpic_assign_isu(mpic, 1, paddr + 0x11000); + mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000); /* ttyS0, ttyS1 */ - mpic_assign_isu(mpic, 2, paddr + 0x11100); + mpic_assign_isu(mpic, 2, mpic->paddr + 0x11100); mpic_init(mpic); } diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index f8f33e16c6b6..f3350d786f5b 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -102,31 +102,14 @@ static void __init mpc7448_hpc2_setup_arch(void) static void __init mpc7448_hpc2_init_IRQ(void) { struct mpic *mpic; - phys_addr_t mpic_paddr = 0; - struct device_node *tsi_pic; #ifdef CONFIG_PCI unsigned int cascade_pci_irq; struct device_node *tsi_pci; struct device_node *cascade_node = NULL; #endif - tsi_pic = of_find_node_by_type(NULL, "open-pic"); - if (tsi_pic) { - unsigned int size; - const void *prop = of_get_property(tsi_pic, "reg", &size); - mpic_paddr = of_translate_address(tsi_pic, prop); - } - - if (mpic_paddr == 0) { - printk("%s: No tsi108 PIC found !\n", __func__); - return; - } - - DBG("%s: tsi108 pic phys_addr = 0x%x\n", __func__, - (u32) mpic_paddr); - - mpic = mpic_alloc(tsi_pic, mpic_paddr, - MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | + mpic = mpic_alloc(NULL, 0, + MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108, 24, NR_IRQS-4, /* num_sources used */ @@ -134,7 +117,7 @@ static void __init mpc7448_hpc2_init_IRQ(void) BUG_ON(mpic == NULL); - mpic_assign_isu(mpic, 0, mpic_paddr + 0x100); + mpic_assign_isu(mpic, 0, mpic->paddr + 0x100); mpic_init(mpic); @@ -159,7 +142,6 @@ static void __init mpc7448_hpc2_init_IRQ(void) #endif /* Configure MPIC outputs to CPU0 */ tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); - of_node_put(tsi_pic); } void mpc7448_hpc2_show_cpuinfo(struct seq_file *m) diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c index f1eebcae9bf0..afa638834965 100644 --- a/arch/powerpc/platforms/embedded6xx/storcenter.c +++ b/arch/powerpc/platforms/embedded6xx/storcenter.c @@ -83,35 +83,17 @@ static void __init storcenter_setup_arch(void) static void __init storcenter_init_IRQ(void) { struct mpic *mpic; - struct device_node *dnp; - const void *prop; - int size; - phys_addr_t paddr; - - dnp = of_find_node_by_type(NULL, "open-pic"); - if (dnp == NULL) - return; - - prop = of_get_property(dnp, "reg", &size); - if (prop == NULL) { - of_node_put(dnp); - return; - } - - paddr = (phys_addr_t)of_translate_address(dnp, prop); - mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET, - 16, 32, " OpenPIC "); - - of_node_put(dnp); + mpic = mpic_alloc(NULL, 0, MPIC_WANTS_RESET, + 16, 32, " OpenPIC "); BUG_ON(mpic == NULL); /* * 16 Serial Interrupts followed by 16 Internal Interrupts. * I2C is the second internal, so it is at 17, 0x11020. */ - mpic_assign_isu(mpic, 0, paddr + 0x10200); - mpic_assign_isu(mpic, 1, paddr + 0x11000); + mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200); + mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000); mpic_init(mpic); } diff --git a/arch/powerpc/platforms/embedded6xx/wii.c b/arch/powerpc/platforms/embedded6xx/wii.c index 1b5dc1a2e145..6d8dadf19f0b 100644 --- a/arch/powerpc/platforms/embedded6xx/wii.c +++ b/arch/powerpc/platforms/embedded6xx/wii.c @@ -79,24 +79,19 @@ void __init wii_memory_fixups(void) BUG_ON(memblock.memory.cnt != 2); BUG_ON(!page_aligned(p[0].base) || !page_aligned(p[1].base)); - p[0].size = _ALIGN_DOWN(p[0].size, PAGE_SIZE); - p[1].size = _ALIGN_DOWN(p[1].size, PAGE_SIZE); + /* trim unaligned tail */ + memblock_remove(ALIGN(p[1].base + p[1].size, PAGE_SIZE), + (phys_addr_t)ULLONG_MAX); - wii_hole_start = p[0].base + p[0].size; + /* determine hole, add & reserve them */ + wii_hole_start = ALIGN(p[0].base + p[0].size, PAGE_SIZE); wii_hole_size = p[1].base - wii_hole_start; - - pr_info("MEM1: <%08llx %08llx>\n", p[0].base, p[0].size); - pr_info("HOLE: <%08lx %08lx>\n", wii_hole_start, wii_hole_size); - pr_info("MEM2: <%08llx %08llx>\n", p[1].base, p[1].size); - - p[0].size += wii_hole_size + p[1].size; - - memblock.memory.cnt = 1; - memblock_analyze(); - - /* reserve the hole */ + memblock_add(wii_hole_start, wii_hole_size); memblock_reserve(wii_hole_start, wii_hole_size); + BUG_ON(memblock.memory.cnt != 1); + __memblock_dump_all(); + /* allow ioremapping the address space in the hole */ __allow_ioremap_reserved = 1; } diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index ea0acbd8966d..8fc62586a973 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -563,7 +563,8 @@ static void yield_shared_processor(void) static void iseries_shared_idle(void) { while (1) { - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); + rcu_idle_enter(); while (!need_resched() && !hvlpevent_is_pending()) { local_irq_disable(); ppc64_runlatch_off(); @@ -577,7 +578,8 @@ static void iseries_shared_idle(void) } ppc64_runlatch_on(); - tick_nohz_restart_sched_tick(); + rcu_idle_exit(); + tick_nohz_idle_exit(); if (hvlpevent_is_pending()) process_iSeries_events(); @@ -593,7 +595,8 @@ static void iseries_dedicated_idle(void) set_thread_flag(TIF_POLLING_NRFLAG); while (1) { - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); + rcu_idle_enter(); if (!need_resched()) { while (!need_resched()) { ppc64_runlatch_off(); @@ -610,7 +613,8 @@ static void iseries_dedicated_idle(void) } ppc64_runlatch_on(); - tick_nohz_restart_sched_tick(); + rcu_idle_exit(); + tick_nohz_idle_exit(); preempt_enable_no_resched(); schedule(); preempt_disable(); diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c index 7e2a5515ed76..02df49fb59f0 100644 --- a/arch/powerpc/platforms/iseries/smp.c +++ b/arch/powerpc/platforms/iseries/smp.c @@ -24,7 +24,7 @@ #include <linux/spinlock.h> #include <linux/cache.h> #include <linux/err.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/cpu.h> #include <asm/ptrace.h> diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index dd2e48b28508..401e3f3f74c8 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -207,6 +207,54 @@ static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose, return hose->cfg_data + u3_ht_cfa1(bus, devfn, offset); } +static int u3_ht_root_read_config(struct pci_controller *hose, u8 offset, + int len, u32 *val) +{ + volatile void __iomem *addr; + + addr = hose->cfg_addr; + addr += ((offset & ~3) << 2) + (4 - len - (offset & 3)); + + switch (len) { + case 1: + *val = in_8(addr); + break; + case 2: + *val = in_be16(addr); + break; + default: + *val = in_be32(addr); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int u3_ht_root_write_config(struct pci_controller *hose, u8 offset, + int len, u32 val) +{ + volatile void __iomem *addr; + + addr = hose->cfg_addr + ((offset & ~3) << 2) + (4 - len - (offset & 3)); + + if (offset >= PCI_BASE_ADDRESS_0 && offset < PCI_CAPABILITY_LIST) + return PCIBIOS_SUCCESSFUL; + + switch (len) { + case 1: + out_8(addr, val); + break; + case 2: + out_be16(addr, val); + break; + default: + out_be32(addr, val); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { @@ -217,6 +265,9 @@ static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; + if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0)) + return u3_ht_root_read_config(hose, offset, len, val); + if (offset > 0xff) return PCIBIOS_BAD_REGISTER_NUMBER; @@ -252,6 +303,9 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; + if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0)) + return u3_ht_root_write_config(hose, offset, len, val); + if (offset > 0xff) return PCIBIOS_BAD_REGISTER_NUMBER; @@ -428,6 +482,7 @@ static void __init setup_u3_ht(struct pci_controller* hose) * reg_property and using some accessor functions instead */ hose->cfg_data = ioremap(0xf2000000, 0x02000000); + hose->cfg_addr = ioremap(0xf8070000, 0x1000); hose->first_busno = 0; hose->last_busno = 0xef; diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index 4c372047c94e..0bcbfe7b2c55 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -221,7 +221,7 @@ static void __init maple_init_IRQ(void) unsigned long openpic_addr = 0; int naddr, n, i, opplen, has_isus = 0; struct mpic *mpic; - unsigned int flags = MPIC_PRIMARY; + unsigned int flags = 0; /* Locate MPIC in the device-tree. Note that there is a bug * in Maple device-tree where the type of the controller is diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index 6f3558210554..98b7a7c13176 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -224,7 +224,7 @@ static __init void pas_init_IRQ(void) openpic_addr = of_read_number(opprop, naddr); printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr); - mpic_flags = MPIC_PRIMARY | MPIC_LARGE_VECTORS | MPIC_NO_BIAS; + mpic_flags = MPIC_LARGE_VECTORS | MPIC_NO_BIAS; nmiprop = of_get_property(mpic_node, "nmi-source", NULL); if (nmiprop) @@ -234,7 +234,7 @@ static __init void pas_init_IRQ(void) mpic_flags, 0, 0, "PASEMI-OPIC"); BUG_ON(!mpic); - mpic_assign_isu(mpic, 0, openpic_addr + 0x10000); + mpic_assign_isu(mpic, 0, mpic->paddr + 0x10000); mpic_init(mpic); /* The NMI/MCK source needs to be prio 15 */ if (nmiprop) { diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c index 04af5f48b4eb..1fc386a23f18 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_32.c +++ b/arch/powerpc/platforms/powermac/cpufreq_32.c @@ -23,7 +23,7 @@ #include <linux/pmu.h> #include <linux/cpufreq.h> #include <linux/init.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/hardirq.h> #include <asm/prom.h> #include <asm/machdep.h> diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 901bfbddc3dd..7761aabfc293 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -52,13 +52,8 @@ struct device_node *of_irq_dflt_pic; /* Default addresses */ static volatile struct pmac_irq_hw __iomem *pmac_irq_hw[4]; -#define GC_LEVEL_MASK 0x3ff00000 -#define OHARE_LEVEL_MASK 0x1ff00000 -#define HEATHROW_LEVEL_MASK 0x1ff00000 - static int max_irqs; static int max_real_irqs; -static u32 level_mask[4]; static DEFINE_RAW_SPINLOCK(pmac_pic_lock); @@ -217,8 +212,7 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id) for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) { int i = irq >> 5; bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; - /* We must read level interrupts from the level register */ - bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]); + bits |= in_le32(&pmac_irq_hw[i]->level); bits &= ppc_cached_irq_mask[i]; if (bits == 0) continue; @@ -248,8 +242,7 @@ static unsigned int pmac_pic_get_irq(void) for (irq = max_real_irqs; (irq -= 32) >= 0; ) { int i = irq >> 5; bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; - /* We must read level interrupts from the level register */ - bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]); + bits |= in_le32(&pmac_irq_hw[i]->level); bits &= ppc_cached_irq_mask[i]; if (bits == 0) continue; @@ -284,19 +277,14 @@ static int pmac_pic_host_match(struct irq_host *h, struct device_node *node) static int pmac_pic_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { - int level; - if (hw >= max_irqs) return -EINVAL; /* Mark level interrupts, set delayed disable for edge ones and set * handlers */ - level = !!(level_mask[hw >> 5] & (1UL << (hw & 0x1f))); - if (level) - irq_set_status_flags(virq, IRQ_LEVEL); - irq_set_chip_and_handler(virq, &pmac_pic, - level ? handle_level_irq : handle_edge_irq); + irq_set_status_flags(virq, IRQ_LEVEL); + irq_set_chip_and_handler(virq, &pmac_pic, handle_level_irq); return 0; } @@ -334,21 +322,14 @@ static void __init pmac_pic_probe_oldstyle(void) if ((master = of_find_node_by_name(NULL, "gc")) != NULL) { max_irqs = max_real_irqs = 32; - level_mask[0] = GC_LEVEL_MASK; } else if ((master = of_find_node_by_name(NULL, "ohare")) != NULL) { max_irqs = max_real_irqs = 32; - level_mask[0] = OHARE_LEVEL_MASK; - /* We might have a second cascaded ohare */ slave = of_find_node_by_name(NULL, "pci106b,7"); - if (slave) { + if (slave) max_irqs = 64; - level_mask[1] = OHARE_LEVEL_MASK; - } } else if ((master = of_find_node_by_name(NULL, "mac-io")) != NULL) { max_irqs = max_real_irqs = 64; - level_mask[0] = HEATHROW_LEVEL_MASK; - level_mask[1] = 0; /* We might have a second cascaded heathrow */ slave = of_find_node_by_name(master, "mac-io"); @@ -363,11 +344,8 @@ static void __init pmac_pic_probe_oldstyle(void) } /* We found a slave */ - if (slave) { + if (slave) max_irqs = 128; - level_mask[2] = HEATHROW_LEVEL_MASK; - level_mask[3] = 0; - } } BUG_ON(master == NULL); @@ -464,18 +442,6 @@ int of_irq_map_oldworld(struct device_node *device, int index, } #endif /* CONFIG_PPC32 */ -static void pmac_u3_cascade(unsigned int irq, struct irq_desc *desc) -{ - struct irq_chip *chip = irq_desc_get_chip(desc); - struct mpic *mpic = irq_desc_get_handler_data(desc); - unsigned int cascade_irq = mpic_get_one_irq(mpic); - - if (cascade_irq != NO_IRQ) - generic_handle_irq(cascade_irq); - - chip->irq_eoi(&desc->irq_data); -} - static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic) { #if defined(CONFIG_XMON) && defined(CONFIG_PPC32) @@ -498,14 +464,8 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np, int master) { const char *name = master ? " MPIC 1 " : " MPIC 2 "; - struct resource r; struct mpic *mpic; - unsigned int flags = master ? MPIC_PRIMARY : 0; - int rc; - - rc = of_address_to_resource(np, 0, &r); - if (rc) - return NULL; + unsigned int flags = master ? 0 : MPIC_SECONDARY; pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0); @@ -519,7 +479,7 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np, if (master && (flags & MPIC_BIG_ENDIAN)) flags |= MPIC_U3_HT_IRQS; - mpic = mpic_alloc(np, r.start, flags, 0, 0, name); + mpic = mpic_alloc(np, 0, flags, 0, 0, name); if (mpic == NULL) return NULL; @@ -532,7 +492,6 @@ static int __init pmac_pic_probe_mpic(void) { struct mpic *mpic1, *mpic2; struct device_node *np, *master = NULL, *slave = NULL; - unsigned int cascade; /* We can have up to 2 MPICs cascaded */ for (np = NULL; (np = of_find_node_by_type(np, "open-pic")) @@ -568,27 +527,14 @@ static int __init pmac_pic_probe_mpic(void) of_node_put(master); - /* No slave, let's go out */ - if (slave == NULL) - return 0; - - /* Get/Map slave interrupt */ - cascade = irq_of_parse_and_map(slave, 0); - if (cascade == NO_IRQ) { - printk(KERN_ERR "Failed to map cascade IRQ\n"); - return 0; - } - - mpic2 = pmac_setup_one_mpic(slave, 0); - if (mpic2 == NULL) { - printk(KERN_ERR "Failed to setup slave MPIC\n"); + /* Set up a cascaded controller, if present */ + if (slave) { + mpic2 = pmac_setup_one_mpic(slave, 0); + if (mpic2 == NULL) + printk(KERN_ERR "Failed to setup slave MPIC\n"); of_node_put(slave); - return 0; } - irq_set_handler_data(cascade, mpic2); - irq_set_chained_handler(cascade, pmac_u3_cascade); - of_node_put(slave); return 0; } diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 96580b189ec2..970ea1de4298 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -494,11 +494,15 @@ static int __init pmac_declare_of_platform_devices(void) return -1; np = of_find_node_by_name(NULL, "valkyrie"); - if (np) + if (np) { of_platform_device_create(np, "valkyrie", NULL); + of_node_put(np); + } np = of_find_node_by_name(NULL, "platinum"); - if (np) + if (np) { of_platform_device_create(np, "platinum", NULL); + of_node_put(np); + } np = of_find_node_by_type(NULL, "smu"); if (np) { of_platform_device_create(np, "smu", NULL); diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index 9b6a820bdd7d..44d769258ebf 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -200,7 +200,7 @@ static int psurge_secondary_ipi_init(void) if (psurge_secondary_virq) rc = request_irq(psurge_secondary_virq, psurge_ipi_intr, - IRQF_PERCPU, "IPI", NULL); + IRQF_PERCPU | IRQF_NO_THREAD, "IPI", NULL); if (rc) pr_err("Failed to setup secondary cpu IPI\n"); @@ -408,13 +408,13 @@ static int __init smp_psurge_kick_cpu(int nr) static struct irqaction psurge_irqaction = { .handler = psurge_ipi_intr, - .flags = IRQF_PERCPU, + .flags = IRQF_PERCPU | IRQF_NO_THREAD, .name = "primary IPI", }; static void __init smp_psurge_setup_cpu(int cpu_nr) { - if (cpu_nr != 0) + if (cpu_nr != 0 || !psurge_start) return; /* reset the entry point so if we get another intr we won't diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile index 31853008b418..bcc3cb48a44e 100644 --- a/arch/powerpc/platforms/powernv/Makefile +++ b/arch/powerpc/platforms/powernv/Makefile @@ -2,4 +2,4 @@ obj-y += setup.o opal-takeover.o opal-wrappers.o opal.o obj-y += opal-rtc.o opal-nvram.o obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o +obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S index 4a3f46d8533e..3bb07e5e43cd 100644 --- a/arch/powerpc/platforms/powernv/opal-wrappers.S +++ b/arch/powerpc/platforms/powernv/opal-wrappers.S @@ -99,3 +99,11 @@ OPAL_CALL(opal_write_oppanel, OPAL_WRITE_OPPANEL); OPAL_CALL(opal_pci_map_pe_dma_window, OPAL_PCI_MAP_PE_DMA_WINDOW); OPAL_CALL(opal_pci_map_pe_dma_window_real, OPAL_PCI_MAP_PE_DMA_WINDOW_REAL); OPAL_CALL(opal_pci_reset, OPAL_PCI_RESET); +OPAL_CALL(opal_pci_get_hub_diag_data, OPAL_PCI_GET_HUB_DIAG_DATA); +OPAL_CALL(opal_pci_get_phb_diag_data, OPAL_PCI_GET_PHB_DIAG_DATA); +OPAL_CALL(opal_pci_fence_phb, OPAL_PCI_FENCE_PHB); +OPAL_CALL(opal_pci_reinit, OPAL_PCI_REINIT); +OPAL_CALL(opal_pci_mask_pe_error, OPAL_PCI_MASK_PE_ERROR); +OPAL_CALL(opal_set_slot_led_status, OPAL_SET_SLOT_LED_STATUS); +OPAL_CALL(opal_get_epow_status, OPAL_GET_EPOW_STATUS); +OPAL_CALL(opal_set_system_attention_led, OPAL_SET_SYSTEM_ATTENTION_LED); diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c new file mode 100644 index 000000000000..f31162cfdaa9 --- /dev/null +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -0,0 +1,1330 @@ +/* + * Support PCI/PCIe on PowerNV platforms + * + * Copyright 2011 Benjamin Herrenschmidt, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/msi.h> + +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> +#include <asm/ppc-pci.h> +#include <asm/opal.h> +#include <asm/iommu.h> +#include <asm/tce.h> +#include <asm/abs_addr.h> + +#include "powernv.h" +#include "pci.h" + +struct resource_wrap { + struct list_head link; + resource_size_t size; + resource_size_t align; + struct pci_dev *dev; /* Set if it's a device */ + struct pci_bus *bus; /* Set if it's a bridge */ +}; + +static int __pe_printk(const char *level, const struct pnv_ioda_pe *pe, + struct va_format *vaf) +{ + char pfix[32]; + + if (pe->pdev) + strlcpy(pfix, dev_name(&pe->pdev->dev), sizeof(pfix)); + else + sprintf(pfix, "%04x:%02x ", + pci_domain_nr(pe->pbus), pe->pbus->number); + return printk("pci %s%s: [PE# %.3d] %pV", level, pfix, pe->pe_number, vaf); +} + +#define define_pe_printk_level(func, kern_level) \ +static int func(const struct pnv_ioda_pe *pe, const char *fmt, ...) \ +{ \ + struct va_format vaf; \ + va_list args; \ + int r; \ + \ + va_start(args, fmt); \ + \ + vaf.fmt = fmt; \ + vaf.va = &args; \ + \ + r = __pe_printk(kern_level, pe, &vaf); \ + va_end(args); \ + \ + return r; \ +} \ + +define_pe_printk_level(pe_err, KERN_ERR); +define_pe_printk_level(pe_warn, KERN_WARNING); +define_pe_printk_level(pe_info, KERN_INFO); + + +/* Calculate resource usage & alignment requirement of a single + * device. This will also assign all resources within the device + * for a given type starting at 0 for the biggest one and then + * assigning in decreasing order of size. + */ +static void __devinit pnv_ioda_calc_dev(struct pci_dev *dev, unsigned int flags, + resource_size_t *size, + resource_size_t *align) +{ + resource_size_t start; + struct resource *r; + int i; + + pr_devel(" -> CDR %s\n", pci_name(dev)); + + *size = *align = 0; + + /* Clear the resources out and mark them all unset */ + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + r = &dev->resource[i]; + if (!(r->flags & flags)) + continue; + if (r->start) { + r->end -= r->start; + r->start = 0; + } + r->flags |= IORESOURCE_UNSET; + } + + /* We currently keep all memory resources together, we + * will handle prefetch & 64-bit separately in the future + * but for now we stick everybody in M32 + */ + start = 0; + for (;;) { + resource_size_t max_size = 0; + int max_no = -1; + + /* Find next biggest resource */ + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + r = &dev->resource[i]; + if (!(r->flags & IORESOURCE_UNSET) || + !(r->flags & flags)) + continue; + if (resource_size(r) > max_size) { + max_size = resource_size(r); + max_no = i; + } + } + if (max_no < 0) + break; + r = &dev->resource[max_no]; + if (max_size > *align) + *align = max_size; + *size += max_size; + r->start = start; + start += max_size; + r->end = r->start + max_size - 1; + r->flags &= ~IORESOURCE_UNSET; + pr_devel(" -> R%d %016llx..%016llx\n", + max_no, r->start, r->end); + } + pr_devel(" <- CDR %s size=%llx align=%llx\n", + pci_name(dev), *size, *align); +} + +/* Allocate a resource "wrap" for a given device or bridge and + * insert it at the right position in the sorted list + */ +static void __devinit pnv_ioda_add_wrap(struct list_head *list, + struct pci_bus *bus, + struct pci_dev *dev, + resource_size_t size, + resource_size_t align) +{ + struct resource_wrap *w1, *w = kzalloc(sizeof(*w), GFP_KERNEL); + + w->size = size; + w->align = align; + w->dev = dev; + w->bus = bus; + + list_for_each_entry(w1, list, link) { + if (w1->align < align) { + list_add_tail(&w->link, &w1->link); + return; + } + } + list_add_tail(&w->link, list); +} + +/* Offset device resources of a given type */ +static void __devinit pnv_ioda_offset_dev(struct pci_dev *dev, + unsigned int flags, + resource_size_t offset) +{ + struct resource *r; + int i; + + pr_devel(" -> ODR %s [%x] +%016llx\n", pci_name(dev), flags, offset); + + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + r = &dev->resource[i]; + if (r->flags & flags) { + dev->resource[i].start += offset; + dev->resource[i].end += offset; + } + } + + pr_devel(" <- ODR %s [%x] +%016llx\n", pci_name(dev), flags, offset); +} + +/* Offset bus resources (& all children) of a given type */ +static void __devinit pnv_ioda_offset_bus(struct pci_bus *bus, + unsigned int flags, + resource_size_t offset) +{ + struct resource *r; + struct pci_dev *dev; + struct pci_bus *cbus; + int i; + + pr_devel(" -> OBR %s [%x] +%016llx\n", + bus->self ? pci_name(bus->self) : "root", flags, offset); + + for (i = 0; i < 2; i++) { + r = bus->resource[i]; + if (r && (r->flags & flags)) { + bus->resource[i]->start += offset; + bus->resource[i]->end += offset; + } + } + list_for_each_entry(dev, &bus->devices, bus_list) + pnv_ioda_offset_dev(dev, flags, offset); + list_for_each_entry(cbus, &bus->children, node) + pnv_ioda_offset_bus(cbus, flags, offset); + + pr_devel(" <- OBR %s [%x]\n", + bus->self ? pci_name(bus->self) : "root", flags); +} + +/* This is the guts of our IODA resource allocation. This is called + * recursively for each bus in the system. It calculates all the + * necessary size and requirements for children and assign them + * resources such that: + * + * - Each function fits in it's own contiguous set of IO/M32 + * segment + * + * - All segments behind a P2P bridge are contiguous and obey + * alignment constraints of those bridges + */ +static void __devinit pnv_ioda_calc_bus(struct pci_bus *bus, unsigned int flags, + resource_size_t *size, + resource_size_t *align) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + struct pnv_phb *phb = hose->private_data; + resource_size_t dev_size, dev_align, start; + resource_size_t min_align, min_balign; + struct pci_dev *cdev; + struct pci_bus *cbus; + struct list_head head; + struct resource_wrap *w; + unsigned int bres; + + *size = *align = 0; + + pr_devel("-> CBR %s [%x]\n", + bus->self ? pci_name(bus->self) : "root", flags); + + /* Calculate alignment requirements based on the type + * of resource we are working on + */ + if (flags & IORESOURCE_IO) { + bres = 0; + min_align = phb->ioda.io_segsize; + min_balign = 0x1000; + } else { + bres = 1; + min_align = phb->ioda.m32_segsize; + min_balign = 0x100000; + } + + /* Gather all our children resources ordered by alignment */ + INIT_LIST_HEAD(&head); + + /* - Busses */ + list_for_each_entry(cbus, &bus->children, node) { + pnv_ioda_calc_bus(cbus, flags, &dev_size, &dev_align); + pnv_ioda_add_wrap(&head, cbus, NULL, dev_size, dev_align); + } + + /* - Devices */ + list_for_each_entry(cdev, &bus->devices, bus_list) { + pnv_ioda_calc_dev(cdev, flags, &dev_size, &dev_align); + /* Align them to segment size */ + if (dev_align < min_align) + dev_align = min_align; + pnv_ioda_add_wrap(&head, NULL, cdev, dev_size, dev_align); + } + if (list_empty(&head)) + goto empty; + + /* Now we can do two things: assign offsets to them within that + * level and get our total alignment & size requirements. The + * assignment algorithm is going to be uber-trivial for now, we + * can try to be smarter later at filling out holes. + */ + start = bus->self ? 0 : bus->resource[bres]->start; + + /* Don't hand out IO 0 */ + if ((flags & IORESOURCE_IO) && !bus->self) + start += 0x1000; + + while(!list_empty(&head)) { + w = list_first_entry(&head, struct resource_wrap, link); + list_del(&w->link); + if (w->size) { + if (start) { + start = ALIGN(start, w->align); + if (w->dev) + pnv_ioda_offset_dev(w->dev,flags,start); + else if (w->bus) + pnv_ioda_offset_bus(w->bus,flags,start); + } + if (w->align > *align) + *align = w->align; + } + start += w->size; + kfree(w); + } + *size = start; + + /* Align and setup bridge resources */ + *align = max_t(resource_size_t, *align, + max_t(resource_size_t, min_align, min_balign)); + *size = ALIGN(*size, + max_t(resource_size_t, min_align, min_balign)); + empty: + /* Only setup P2P's, not the PHB itself */ + if (bus->self) { + WARN_ON(bus->resource[bres] == NULL); + bus->resource[bres]->start = 0; + bus->resource[bres]->flags = (*size) ? flags : 0; + bus->resource[bres]->end = (*size) ? (*size - 1) : 0; + + /* Clear prefetch bus resources for now */ + bus->resource[2]->flags = 0; + } + + pr_devel("<- CBR %s [%x] *size=%016llx *align=%016llx\n", + bus->self ? pci_name(bus->self) : "root", flags,*size,*align); +} + +static struct pci_dn *pnv_ioda_get_pdn(struct pci_dev *dev) +{ + struct device_node *np; + + np = pci_device_to_OF_node(dev); + if (!np) + return NULL; + return PCI_DN(np); +} + +static void __devinit pnv_ioda_setup_pe_segments(struct pci_dev *dev) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + struct pnv_phb *phb = hose->private_data; + struct pci_dn *pdn = pnv_ioda_get_pdn(dev); + unsigned int pe, i; + resource_size_t pos; + struct resource io_res; + struct resource m32_res; + struct pci_bus_region region; + int rc; + + /* Anything not referenced in the device-tree gets PE#0 */ + pe = pdn ? pdn->pe_number : 0; + + /* Calculate the device min/max */ + io_res.start = m32_res.start = (resource_size_t)-1; + io_res.end = m32_res.end = 0; + io_res.flags = IORESOURCE_IO; + m32_res.flags = IORESOURCE_MEM; + + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + struct resource *r = NULL; + if (dev->resource[i].flags & IORESOURCE_IO) + r = &io_res; + if (dev->resource[i].flags & IORESOURCE_MEM) + r = &m32_res; + if (!r) + continue; + if (dev->resource[i].start < r->start) + r->start = dev->resource[i].start; + if (dev->resource[i].end > r->end) + r->end = dev->resource[i].end; + } + + /* Setup IO segments */ + if (io_res.start < io_res.end) { + pcibios_resource_to_bus(dev, ®ion, &io_res); + pos = region.start; + i = pos / phb->ioda.io_segsize; + while(i < phb->ioda.total_pe && pos <= region.end) { + if (phb->ioda.io_segmap[i]) { + pr_err("%s: Trying to use IO seg #%d which is" + " already used by PE# %d\n", + pci_name(dev), i, + phb->ioda.io_segmap[i]); + /* XXX DO SOMETHING TO DISABLE DEVICE ? */ + break; + } + phb->ioda.io_segmap[i] = pe; + rc = opal_pci_map_pe_mmio_window(phb->opal_id, pe, + OPAL_IO_WINDOW_TYPE, + 0, i); + if (rc != OPAL_SUCCESS) { + pr_err("%s: OPAL error %d setting up mapping" + " for IO seg# %d\n", + pci_name(dev), rc, i); + /* XXX DO SOMETHING TO DISABLE DEVICE ? */ + break; + } + pos += phb->ioda.io_segsize; + i++; + }; + } + + /* Setup M32 segments */ + if (m32_res.start < m32_res.end) { + pcibios_resource_to_bus(dev, ®ion, &m32_res); + pos = region.start; + i = pos / phb->ioda.m32_segsize; + while(i < phb->ioda.total_pe && pos <= region.end) { + if (phb->ioda.m32_segmap[i]) { + pr_err("%s: Trying to use M32 seg #%d which is" + " already used by PE# %d\n", + pci_name(dev), i, + phb->ioda.m32_segmap[i]); + /* XXX DO SOMETHING TO DISABLE DEVICE ? */ + break; + } + phb->ioda.m32_segmap[i] = pe; + rc = opal_pci_map_pe_mmio_window(phb->opal_id, pe, + OPAL_M32_WINDOW_TYPE, + 0, i); + if (rc != OPAL_SUCCESS) { + pr_err("%s: OPAL error %d setting up mapping" + " for M32 seg# %d\n", + pci_name(dev), rc, i); + /* XXX DO SOMETHING TO DISABLE DEVICE ? */ + break; + } + pos += phb->ioda.m32_segsize; + i++; + } + } +} + +/* Check if a resource still fits in the total IO or M32 range + * for a given PHB + */ +static int __devinit pnv_ioda_resource_fit(struct pci_controller *hose, + struct resource *r) +{ + struct resource *bounds; + + if (r->flags & IORESOURCE_IO) + bounds = &hose->io_resource; + else if (r->flags & IORESOURCE_MEM) + bounds = &hose->mem_resources[0]; + else + return 1; + + if (r->start >= bounds->start && r->end <= bounds->end) + return 1; + r->flags = 0; + return 0; +} + +static void __devinit pnv_ioda_update_resources(struct pci_bus *bus) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + struct pci_bus *cbus; + struct pci_dev *cdev; + unsigned int i; + + /* We used to clear all device enables here. However it looks like + * clearing MEM enable causes Obsidian (IPR SCS) to go bonkers, + * and shoot fatal errors to the PHB which in turns fences itself + * and we can't recover from that ... yet. So for now, let's leave + * the enables as-is and hope for the best. + */ + + /* Check if bus resources fit in our IO or M32 range */ + for (i = 0; bus->self && (i < 2); i++) { + struct resource *r = bus->resource[i]; + if (r && !pnv_ioda_resource_fit(hose, r)) + pr_err("%s: Bus %d resource %d disabled, no room\n", + pci_name(bus->self), bus->number, i); + } + + /* Update self if it's not a PHB */ + if (bus->self) + pci_setup_bridge(bus); + + /* Update child devices */ + list_for_each_entry(cdev, &bus->devices, bus_list) { + /* Check if resource fits, if not, disabled it */ + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + struct resource *r = &cdev->resource[i]; + if (!pnv_ioda_resource_fit(hose, r)) + pr_err("%s: Resource %d disabled, no room\n", + pci_name(cdev), i); + } + + /* Assign segments */ + pnv_ioda_setup_pe_segments(cdev); + + /* Update HW BARs */ + for (i = 0; i <= PCI_ROM_RESOURCE; i++) + pci_update_resource(cdev, i); + } + + /* Update child busses */ + list_for_each_entry(cbus, &bus->children, node) + pnv_ioda_update_resources(cbus); +} + +static int __devinit pnv_ioda_alloc_pe(struct pnv_phb *phb) +{ + unsigned long pe; + + do { + pe = find_next_zero_bit(phb->ioda.pe_alloc, + phb->ioda.total_pe, 0); + if (pe >= phb->ioda.total_pe) + return IODA_INVALID_PE; + } while(test_and_set_bit(pe, phb->ioda.pe_alloc)); + + phb->ioda.pe_array[pe].pe_number = pe; + return pe; +} + +static void __devinit pnv_ioda_free_pe(struct pnv_phb *phb, int pe) +{ + WARN_ON(phb->ioda.pe_array[pe].pdev); + + memset(&phb->ioda.pe_array[pe], 0, sizeof(struct pnv_ioda_pe)); + clear_bit(pe, phb->ioda.pe_alloc); +} + +/* Currently those 2 are only used when MSIs are enabled, this will change + * but in the meantime, we need to protect them to avoid warnings + */ +#ifdef CONFIG_PCI_MSI +static struct pnv_ioda_pe * __devinit __pnv_ioda_get_one_pe(struct pci_dev *dev) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + struct pnv_phb *phb = hose->private_data; + struct pci_dn *pdn = pnv_ioda_get_pdn(dev); + + if (!pdn) + return NULL; + if (pdn->pe_number == IODA_INVALID_PE) + return NULL; + return &phb->ioda.pe_array[pdn->pe_number]; +} + +static struct pnv_ioda_pe * __devinit pnv_ioda_get_pe(struct pci_dev *dev) +{ + struct pnv_ioda_pe *pe = __pnv_ioda_get_one_pe(dev); + + while (!pe && dev->bus->self) { + dev = dev->bus->self; + pe = __pnv_ioda_get_one_pe(dev); + if (pe) + pe = pe->bus_pe; + } + return pe; +} +#endif /* CONFIG_PCI_MSI */ + +static int __devinit pnv_ioda_configure_pe(struct pnv_phb *phb, + struct pnv_ioda_pe *pe) +{ + struct pci_dev *parent; + uint8_t bcomp, dcomp, fcomp; + long rc, rid_end, rid; + + /* Bus validation ? */ + if (pe->pbus) { + int count; + + dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER; + fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER; + parent = pe->pbus->self; + count = pe->pbus->subordinate - pe->pbus->secondary + 1; + switch(count) { + case 1: bcomp = OpalPciBusAll; break; + case 2: bcomp = OpalPciBus7Bits; break; + case 4: bcomp = OpalPciBus6Bits; break; + case 8: bcomp = OpalPciBus5Bits; break; + case 16: bcomp = OpalPciBus4Bits; break; + case 32: bcomp = OpalPciBus3Bits; break; + default: + pr_err("%s: Number of subordinate busses %d" + " unsupported\n", + pci_name(pe->pbus->self), count); + /* Do an exact match only */ + bcomp = OpalPciBusAll; + } + rid_end = pe->rid + (count << 8); + } else { + parent = pe->pdev->bus->self; + bcomp = OpalPciBusAll; + dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER; + fcomp = OPAL_COMPARE_RID_FUNCTION_NUMBER; + rid_end = pe->rid + 1; + } + + /* Associate PE in PELT */ + rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid, + bcomp, dcomp, fcomp, OPAL_MAP_PE); + if (rc) { + pe_err(pe, "OPAL error %ld trying to setup PELT table\n", rc); + return -ENXIO; + } + opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number, + OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); + + /* Add to all parents PELT-V */ + while (parent) { + struct pci_dn *pdn = pnv_ioda_get_pdn(parent); + if (pdn && pdn->pe_number != IODA_INVALID_PE) { + rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number, + pe->pe_number, OPAL_ADD_PE_TO_DOMAIN); + /* XXX What to do in case of error ? */ + } + parent = parent->bus->self; + } + /* Setup reverse map */ + for (rid = pe->rid; rid < rid_end; rid++) + phb->ioda.pe_rmap[rid] = pe->pe_number; + + /* Setup one MVTs on IODA1 */ + if (phb->type == PNV_PHB_IODA1) { + pe->mve_number = pe->pe_number; + rc = opal_pci_set_mve(phb->opal_id, pe->mve_number, + pe->pe_number); + if (rc) { + pe_err(pe, "OPAL error %ld setting up MVE %d\n", + rc, pe->mve_number); + pe->mve_number = -1; + } else { + rc = opal_pci_set_mve_enable(phb->opal_id, + pe->mve_number, OPAL_ENABLE_MVE); + if (rc) { + pe_err(pe, "OPAL error %ld enabling MVE %d\n", + rc, pe->mve_number); + pe->mve_number = -1; + } + } + } else if (phb->type == PNV_PHB_IODA2) + pe->mve_number = 0; + + return 0; +} + +static void __devinit pnv_ioda_link_pe_by_weight(struct pnv_phb *phb, + struct pnv_ioda_pe *pe) +{ + struct pnv_ioda_pe *lpe; + + list_for_each_entry(lpe, &phb->ioda.pe_list, link) { + if (lpe->dma_weight < pe->dma_weight) { + list_add_tail(&pe->link, &lpe->link); + return; + } + } + list_add_tail(&pe->link, &phb->ioda.pe_list); +} + +static unsigned int pnv_ioda_dma_weight(struct pci_dev *dev) +{ + /* This is quite simplistic. The "base" weight of a device + * is 10. 0 means no DMA is to be accounted for it. + */ + + /* If it's a bridge, no DMA */ + if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL) + return 0; + + /* Reduce the weight of slow USB controllers */ + if (dev->class == PCI_CLASS_SERIAL_USB_UHCI || + dev->class == PCI_CLASS_SERIAL_USB_OHCI || + dev->class == PCI_CLASS_SERIAL_USB_EHCI) + return 3; + + /* Increase the weight of RAID (includes Obsidian) */ + if ((dev->class >> 8) == PCI_CLASS_STORAGE_RAID) + return 15; + + /* Default */ + return 10; +} + +static struct pnv_ioda_pe * __devinit pnv_ioda_setup_dev_PE(struct pci_dev *dev) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + struct pnv_phb *phb = hose->private_data; + struct pci_dn *pdn = pnv_ioda_get_pdn(dev); + struct pnv_ioda_pe *pe; + int pe_num; + + if (!pdn) { + pr_err("%s: Device tree node not associated properly\n", + pci_name(dev)); + return NULL; + } + if (pdn->pe_number != IODA_INVALID_PE) + return NULL; + + /* PE#0 has been pre-set */ + if (dev->bus->number == 0) + pe_num = 0; + else + pe_num = pnv_ioda_alloc_pe(phb); + if (pe_num == IODA_INVALID_PE) { + pr_warning("%s: Not enough PE# available, disabling device\n", + pci_name(dev)); + return NULL; + } + + /* NOTE: We get only one ref to the pci_dev for the pdn, not for the + * pointer in the PE data structure, both should be destroyed at the + * same time. However, this needs to be looked at more closely again + * once we actually start removing things (Hotplug, SR-IOV, ...) + * + * At some point we want to remove the PDN completely anyways + */ + pe = &phb->ioda.pe_array[pe_num]; + pci_dev_get(dev); + pdn->pcidev = dev; + pdn->pe_number = pe_num; + pe->pdev = dev; + pe->pbus = NULL; + pe->tce32_seg = -1; + pe->mve_number = -1; + pe->rid = dev->bus->number << 8 | pdn->devfn; + + pe_info(pe, "Associated device to PE\n"); + + if (pnv_ioda_configure_pe(phb, pe)) { + /* XXX What do we do here ? */ + if (pe_num) + pnv_ioda_free_pe(phb, pe_num); + pdn->pe_number = IODA_INVALID_PE; + pe->pdev = NULL; + pci_dev_put(dev); + return NULL; + } + + /* Assign a DMA weight to the device */ + pe->dma_weight = pnv_ioda_dma_weight(dev); + if (pe->dma_weight != 0) { + phb->ioda.dma_weight += pe->dma_weight; + phb->ioda.dma_pe_count++; + } + + /* Link the PE */ + pnv_ioda_link_pe_by_weight(phb, pe); + + return pe; +} + +static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + struct pci_dn *pdn = pnv_ioda_get_pdn(dev); + + if (pdn == NULL) { + pr_warn("%s: No device node associated with device !\n", + pci_name(dev)); + continue; + } + pci_dev_get(dev); + pdn->pcidev = dev; + pdn->pe_number = pe->pe_number; + pe->dma_weight += pnv_ioda_dma_weight(dev); + if (dev->subordinate) + pnv_ioda_setup_same_PE(dev->subordinate, pe); + } +} + +static void __devinit pnv_ioda_setup_bus_PE(struct pci_dev *dev, + struct pnv_ioda_pe *ppe) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + struct pnv_phb *phb = hose->private_data; + struct pci_bus *bus = dev->subordinate; + struct pnv_ioda_pe *pe; + int pe_num; + + if (!bus) { + pr_warning("%s: Bridge without a subordinate bus !\n", + pci_name(dev)); + return; + } + pe_num = pnv_ioda_alloc_pe(phb); + if (pe_num == IODA_INVALID_PE) { + pr_warning("%s: Not enough PE# available, disabling bus\n", + pci_name(dev)); + return; + } + + pe = &phb->ioda.pe_array[pe_num]; + ppe->bus_pe = pe; + pe->pbus = bus; + pe->pdev = NULL; + pe->tce32_seg = -1; + pe->mve_number = -1; + pe->rid = bus->secondary << 8; + pe->dma_weight = 0; + + pe_info(pe, "Secondary busses %d..%d associated with PE\n", + bus->secondary, bus->subordinate); + + if (pnv_ioda_configure_pe(phb, pe)) { + /* XXX What do we do here ? */ + if (pe_num) + pnv_ioda_free_pe(phb, pe_num); + pe->pbus = NULL; + return; + } + + /* Associate it with all child devices */ + pnv_ioda_setup_same_PE(bus, pe); + + /* Account for one DMA PE if at least one DMA capable device exist + * below the bridge + */ + if (pe->dma_weight != 0) { + phb->ioda.dma_weight += pe->dma_weight; + phb->ioda.dma_pe_count++; + } + + /* Link the PE */ + pnv_ioda_link_pe_by_weight(phb, pe); +} + +static void __devinit pnv_ioda_setup_PEs(struct pci_bus *bus) +{ + struct pci_dev *dev; + struct pnv_ioda_pe *pe; + + list_for_each_entry(dev, &bus->devices, bus_list) { + pe = pnv_ioda_setup_dev_PE(dev); + if (pe == NULL) + continue; + /* Leaving the PCIe domain ... single PE# */ + if (dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) + pnv_ioda_setup_bus_PE(dev, pe); + else if (dev->subordinate) + pnv_ioda_setup_PEs(dev->subordinate); + } +} + +static void __devinit pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, + struct pci_dev *dev) +{ + /* We delay DMA setup after we have assigned all PE# */ +} + +static void __devinit pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, + struct pci_bus *bus) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + set_iommu_table_base(&dev->dev, &pe->tce32_table); + if (dev->subordinate) + pnv_ioda_setup_bus_dma(pe, dev->subordinate); + } +} + +static void __devinit pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb, + struct pnv_ioda_pe *pe, + unsigned int base, + unsigned int segs) +{ + + struct page *tce_mem = NULL; + const __be64 *swinvp; + struct iommu_table *tbl; + unsigned int i; + int64_t rc; + void *addr; + + /* 256M DMA window, 4K TCE pages, 8 bytes TCE */ +#define TCE32_TABLE_SIZE ((0x10000000 / 0x1000) * 8) + + /* XXX FIXME: Handle 64-bit only DMA devices */ + /* XXX FIXME: Provide 64-bit DMA facilities & non-4K TCE tables etc.. */ + /* XXX FIXME: Allocate multi-level tables on PHB3 */ + + /* We shouldn't already have a 32-bit DMA associated */ + if (WARN_ON(pe->tce32_seg >= 0)) + return; + + /* Grab a 32-bit TCE table */ + pe->tce32_seg = base; + pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n", + (base << 28), ((base + segs) << 28) - 1); + + /* XXX Currently, we allocate one big contiguous table for the + * TCEs. We only really need one chunk per 256M of TCE space + * (ie per segment) but that's an optimization for later, it + * requires some added smarts with our get/put_tce implementation + */ + tce_mem = alloc_pages_node(phb->hose->node, GFP_KERNEL, + get_order(TCE32_TABLE_SIZE * segs)); + if (!tce_mem) { + pe_err(pe, " Failed to allocate a 32-bit TCE memory\n"); + goto fail; + } + addr = page_address(tce_mem); + memset(addr, 0, TCE32_TABLE_SIZE * segs); + + /* Configure HW */ + for (i = 0; i < segs; i++) { + rc = opal_pci_map_pe_dma_window(phb->opal_id, + pe->pe_number, + base + i, 1, + __pa(addr) + TCE32_TABLE_SIZE * i, + TCE32_TABLE_SIZE, 0x1000); + if (rc) { + pe_err(pe, " Failed to configure 32-bit TCE table," + " err %ld\n", rc); + goto fail; + } + } + + /* Setup linux iommu table */ + tbl = &pe->tce32_table; + pnv_pci_setup_iommu_table(tbl, addr, TCE32_TABLE_SIZE * segs, + base << 28); + + /* OPAL variant of P7IOC SW invalidated TCEs */ + swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL); + if (swinvp) { + /* We need a couple more fields -- an address and a data + * to or. Since the bus is only printed out on table free + * errors, and on the first pass the data will be a relative + * bus number, print that out instead. + */ + tbl->it_busno = 0; + tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8); + tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE + | TCE_PCI_SWINV_PAIR; + } + iommu_init_table(tbl, phb->hose->node); + + if (pe->pdev) + set_iommu_table_base(&pe->pdev->dev, tbl); + else + pnv_ioda_setup_bus_dma(pe, pe->pbus); + + return; + fail: + /* XXX Failure: Try to fallback to 64-bit only ? */ + if (pe->tce32_seg >= 0) + pe->tce32_seg = -1; + if (tce_mem) + __free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs)); +} + +static void __devinit pnv_ioda_setup_dma(struct pnv_phb *phb) +{ + struct pci_controller *hose = phb->hose; + unsigned int residual, remaining, segs, tw, base; + struct pnv_ioda_pe *pe; + + /* If we have more PE# than segments available, hand out one + * per PE until we run out and let the rest fail. If not, + * then we assign at least one segment per PE, plus more based + * on the amount of devices under that PE + */ + if (phb->ioda.dma_pe_count > phb->ioda.tce32_count) + residual = 0; + else + residual = phb->ioda.tce32_count - + phb->ioda.dma_pe_count; + + pr_info("PCI: Domain %04x has %ld available 32-bit DMA segments\n", + hose->global_number, phb->ioda.tce32_count); + pr_info("PCI: %d PE# for a total weight of %d\n", + phb->ioda.dma_pe_count, phb->ioda.dma_weight); + + /* Walk our PE list and configure their DMA segments, hand them + * out one base segment plus any residual segments based on + * weight + */ + remaining = phb->ioda.tce32_count; + tw = phb->ioda.dma_weight; + base = 0; + list_for_each_entry(pe, &phb->ioda.pe_list, link) { + if (!pe->dma_weight) + continue; + if (!remaining) { + pe_warn(pe, "No DMA32 resources available\n"); + continue; + } + segs = 1; + if (residual) { + segs += ((pe->dma_weight * residual) + (tw / 2)) / tw; + if (segs > remaining) + segs = remaining; + } + pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n", + pe->dma_weight, segs); + pnv_pci_ioda_setup_dma_pe(phb, pe, base, segs); + remaining -= segs; + base += segs; + } +} + +#ifdef CONFIG_PCI_MSI +static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev, + unsigned int hwirq, unsigned int is_64, + struct msi_msg *msg) +{ + struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev); + unsigned int xive_num = hwirq - phb->msi_base; + uint64_t addr64; + uint32_t addr32, data; + int rc; + + /* No PE assigned ? bail out ... no MSI for you ! */ + if (pe == NULL) + return -ENXIO; + + /* Check if we have an MVE */ + if (pe->mve_number < 0) + return -ENXIO; + + /* Assign XIVE to PE */ + rc = opal_pci_set_xive_pe(phb->opal_id, pe->pe_number, xive_num); + if (rc) { + pr_warn("%s: OPAL error %d setting XIVE %d PE\n", + pci_name(dev), rc, xive_num); + return -EIO; + } + + if (is_64) { + rc = opal_get_msi_64(phb->opal_id, pe->mve_number, xive_num, 1, + &addr64, &data); + if (rc) { + pr_warn("%s: OPAL error %d getting 64-bit MSI data\n", + pci_name(dev), rc); + return -EIO; + } + msg->address_hi = addr64 >> 32; + msg->address_lo = addr64 & 0xfffffffful; + } else { + rc = opal_get_msi_32(phb->opal_id, pe->mve_number, xive_num, 1, + &addr32, &data); + if (rc) { + pr_warn("%s: OPAL error %d getting 32-bit MSI data\n", + pci_name(dev), rc); + return -EIO; + } + msg->address_hi = 0; + msg->address_lo = addr32; + } + msg->data = data; + + pr_devel("%s: %s-bit MSI on hwirq %x (xive #%d)," + " address=%x_%08x data=%x PE# %d\n", + pci_name(dev), is_64 ? "64" : "32", hwirq, xive_num, + msg->address_hi, msg->address_lo, data, pe->pe_number); + + return 0; +} + +static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) +{ + unsigned int bmap_size; + const __be32 *prop = of_get_property(phb->hose->dn, + "ibm,opal-msi-ranges", NULL); + if (!prop) { + /* BML Fallback */ + prop = of_get_property(phb->hose->dn, "msi-ranges", NULL); + } + if (!prop) + return; + + phb->msi_base = be32_to_cpup(prop); + phb->msi_count = be32_to_cpup(prop + 1); + bmap_size = BITS_TO_LONGS(phb->msi_count) * sizeof(unsigned long); + phb->msi_map = zalloc_maybe_bootmem(bmap_size, GFP_KERNEL); + if (!phb->msi_map) { + pr_err("PCI %d: Failed to allocate MSI bitmap !\n", + phb->hose->global_number); + return; + } + phb->msi_setup = pnv_pci_ioda_msi_setup; + phb->msi32_support = 1; + pr_info(" Allocated bitmap for %d MSIs (base IRQ 0x%x)\n", + phb->msi_count, phb->msi_base); +} +#else +static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { } +#endif /* CONFIG_PCI_MSI */ + +/* This is the starting point of our IODA specific resource + * allocation process + */ +static void __devinit pnv_pci_ioda_fixup_phb(struct pci_controller *hose) +{ + resource_size_t size, align; + struct pci_bus *child; + + /* Associate PEs per functions */ + pnv_ioda_setup_PEs(hose->bus); + + /* Calculate all resources */ + pnv_ioda_calc_bus(hose->bus, IORESOURCE_IO, &size, &align); + pnv_ioda_calc_bus(hose->bus, IORESOURCE_MEM, &size, &align); + + /* Apply then to HW */ + pnv_ioda_update_resources(hose->bus); + + /* Setup DMA */ + pnv_ioda_setup_dma(hose->private_data); + + /* Configure PCI Express settings */ + list_for_each_entry(child, &hose->bus->children, node) { + struct pci_dev *self = child->self; + if (!self) + continue; + pcie_bus_configure_settings(child, self->pcie_mpss); + } +} + +/* Prevent enabling devices for which we couldn't properly + * assign a PE + */ +static int __devinit pnv_pci_enable_device_hook(struct pci_dev *dev) +{ + struct pci_dn *pdn = pnv_ioda_get_pdn(dev); + + if (!pdn || pdn->pe_number == IODA_INVALID_PE) + return -EINVAL; + return 0; +} + +static u32 pnv_ioda_bdfn_to_pe(struct pnv_phb *phb, struct pci_bus *bus, + u32 devfn) +{ + return phb->ioda.pe_rmap[(bus->number << 8) | devfn]; +} + +void __init pnv_pci_init_ioda1_phb(struct device_node *np) +{ + struct pci_controller *hose; + static int primary = 1; + struct pnv_phb *phb; + unsigned long size, m32map_off, iomap_off, pemap_off; + const u64 *prop64; + u64 phb_id; + void *aux; + long rc; + + pr_info(" Initializing IODA OPAL PHB %s\n", np->full_name); + + prop64 = of_get_property(np, "ibm,opal-phbid", NULL); + if (!prop64) { + pr_err(" Missing \"ibm,opal-phbid\" property !\n"); + return; + } + phb_id = be64_to_cpup(prop64); + pr_debug(" PHB-ID : 0x%016llx\n", phb_id); + + phb = alloc_bootmem(sizeof(struct pnv_phb)); + if (phb) { + memset(phb, 0, sizeof(struct pnv_phb)); + phb->hose = hose = pcibios_alloc_controller(np); + } + if (!phb || !phb->hose) { + pr_err("PCI: Failed to allocate PCI controller for %s\n", + np->full_name); + return; + } + + spin_lock_init(&phb->lock); + /* XXX Use device-tree */ + hose->first_busno = 0; + hose->last_busno = 0xff; + hose->private_data = phb; + phb->opal_id = phb_id; + phb->type = PNV_PHB_IODA1; + + /* Detect specific models for error handling */ + if (of_device_is_compatible(np, "ibm,p7ioc-pciex")) + phb->model = PNV_PHB_MODEL_P7IOC; + else + phb->model = PNV_PHB_MODEL_UNKNOWN; + + /* We parse "ranges" now since we need to deduce the register base + * from the IO base + */ + pci_process_bridge_OF_ranges(phb->hose, np, primary); + primary = 0; + + /* Magic formula from Milton */ + phb->regs = of_iomap(np, 0); + if (phb->regs == NULL) + pr_err(" Failed to map registers !\n"); + + + /* XXX This is hack-a-thon. This needs to be changed so that: + * - we obtain stuff like PE# etc... from device-tree + * - we properly re-allocate M32 ourselves + * (the OFW one isn't very good) + */ + + /* Initialize more IODA stuff */ + phb->ioda.total_pe = 128; + + phb->ioda.m32_size = resource_size(&hose->mem_resources[0]); + /* OFW Has already off top 64k of M32 space (MSI space) */ + phb->ioda.m32_size += 0x10000; + + phb->ioda.m32_segsize = phb->ioda.m32_size / phb->ioda.total_pe; + phb->ioda.m32_pci_base = hose->mem_resources[0].start - + hose->pci_mem_offset; + phb->ioda.io_size = hose->pci_io_size; + phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe; + phb->ioda.io_pci_base = 0; /* XXX calculate this ? */ + + /* Allocate aux data & arrays */ + size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long)); + m32map_off = size; + size += phb->ioda.total_pe; + iomap_off = size; + size += phb->ioda.total_pe; + pemap_off = size; + size += phb->ioda.total_pe * sizeof(struct pnv_ioda_pe); + aux = alloc_bootmem(size); + memset(aux, 0, size); + phb->ioda.pe_alloc = aux; + phb->ioda.m32_segmap = aux + m32map_off; + phb->ioda.io_segmap = aux + iomap_off; + phb->ioda.pe_array = aux + pemap_off; + set_bit(0, phb->ioda.pe_alloc); + + INIT_LIST_HEAD(&phb->ioda.pe_list); + + /* Calculate how many 32-bit TCE segments we have */ + phb->ioda.tce32_count = phb->ioda.m32_pci_base >> 28; + + /* Clear unusable m64 */ + hose->mem_resources[1].flags = 0; + hose->mem_resources[1].start = 0; + hose->mem_resources[1].end = 0; + hose->mem_resources[2].flags = 0; + hose->mem_resources[2].start = 0; + hose->mem_resources[2].end = 0; + +#if 0 + rc = opal_pci_set_phb_mem_window(opal->phb_id, + window_type, + window_num, + starting_real_address, + starting_pci_address, + segment_size); +#endif + + pr_info(" %d PE's M32: 0x%x [segment=0x%x] IO: 0x%x [segment=0x%x]\n", + phb->ioda.total_pe, + phb->ioda.m32_size, phb->ioda.m32_segsize, + phb->ioda.io_size, phb->ioda.io_segsize); + + if (phb->regs) { + pr_devel(" BUID = 0x%016llx\n", in_be64(phb->regs + 0x100)); + pr_devel(" PHB2_CR = 0x%016llx\n", in_be64(phb->regs + 0x160)); + pr_devel(" IO_BAR = 0x%016llx\n", in_be64(phb->regs + 0x170)); + pr_devel(" IO_BAMR = 0x%016llx\n", in_be64(phb->regs + 0x178)); + pr_devel(" IO_SAR = 0x%016llx\n", in_be64(phb->regs + 0x180)); + pr_devel(" M32_BAR = 0x%016llx\n", in_be64(phb->regs + 0x190)); + pr_devel(" M32_BAMR = 0x%016llx\n", in_be64(phb->regs + 0x198)); + pr_devel(" M32_SAR = 0x%016llx\n", in_be64(phb->regs + 0x1a0)); + } + phb->hose->ops = &pnv_pci_ops; + + /* Setup RID -> PE mapping function */ + phb->bdfn_to_pe = pnv_ioda_bdfn_to_pe; + + /* Setup TCEs */ + phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup; + + /* Setup MSI support */ + pnv_pci_init_ioda_msis(phb); + + /* We set both probe_only and PCI_REASSIGN_ALL_RSRC. This is an + * odd combination which essentially means that we skip all resource + * fixups and assignments in the generic code, and do it all + * ourselves here + */ + pci_probe_only = 1; + ppc_md.pcibios_fixup_phb = pnv_pci_ioda_fixup_phb; + ppc_md.pcibios_enable_device_hook = pnv_pci_enable_device_hook; + pci_add_flags(PCI_REASSIGN_ALL_RSRC); + + /* Reset IODA tables to a clean state */ + rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET); + if (rc) + pr_warning(" OPAL Error %ld performing IODA table reset !\n", rc); + opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE); +} + +void __init pnv_pci_init_ioda_hub(struct device_node *np) +{ + struct device_node *phbn; + const u64 *prop64; + u64 hub_id; + + pr_info("Probing IODA IO-Hub %s\n", np->full_name); + + prop64 = of_get_property(np, "ibm,opal-hubid", NULL); + if (!prop64) { + pr_err(" Missing \"ibm,opal-hubid\" property !\n"); + return; + } + hub_id = be64_to_cpup(prop64); + pr_devel(" HUB-ID : 0x%016llx\n", hub_id); + + /* Count child PHBs */ + for_each_child_of_node(np, phbn) { + /* Look for IODA1 PHBs */ + if (of_device_is_compatible(phbn, "ibm,ioda-phb")) + pnv_pci_init_ioda1_phb(phbn); + } +} diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c index 4c80f7c77d56..264967770c3a 100644 --- a/arch/powerpc/platforms/powernv/pci-p5ioc2.c +++ b/arch/powerpc/platforms/powernv/pci-p5ioc2.c @@ -137,6 +137,7 @@ static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np, phb->hose->private_data = phb; phb->opal_id = phb_id; phb->type = PNV_PHB_P5IOC2; + phb->model = PNV_PHB_MODEL_P5IOC2; phb->regs = of_iomap(np, 0); diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 85bb66d7f933..a70bc1e385eb 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -144,6 +144,112 @@ static void pnv_teardown_msi_irqs(struct pci_dev *pdev) } #endif /* CONFIG_PCI_MSI */ +static void pnv_pci_dump_p7ioc_diag_data(struct pnv_phb *phb) +{ + struct OpalIoP7IOCPhbErrorData *data = &phb->diag.p7ioc; + int i; + + pr_info("PHB %d diagnostic data:\n", phb->hose->global_number); + + pr_info(" brdgCtl = 0x%08x\n", data->brdgCtl); + + pr_info(" portStatusReg = 0x%08x\n", data->portStatusReg); + pr_info(" rootCmplxStatus = 0x%08x\n", data->rootCmplxStatus); + pr_info(" busAgentStatus = 0x%08x\n", data->busAgentStatus); + + pr_info(" deviceStatus = 0x%08x\n", data->deviceStatus); + pr_info(" slotStatus = 0x%08x\n", data->slotStatus); + pr_info(" linkStatus = 0x%08x\n", data->linkStatus); + pr_info(" devCmdStatus = 0x%08x\n", data->devCmdStatus); + pr_info(" devSecStatus = 0x%08x\n", data->devSecStatus); + + pr_info(" rootErrorStatus = 0x%08x\n", data->rootErrorStatus); + pr_info(" uncorrErrorStatus = 0x%08x\n", data->uncorrErrorStatus); + pr_info(" corrErrorStatus = 0x%08x\n", data->corrErrorStatus); + pr_info(" tlpHdr1 = 0x%08x\n", data->tlpHdr1); + pr_info(" tlpHdr2 = 0x%08x\n", data->tlpHdr2); + pr_info(" tlpHdr3 = 0x%08x\n", data->tlpHdr3); + pr_info(" tlpHdr4 = 0x%08x\n", data->tlpHdr4); + pr_info(" sourceId = 0x%08x\n", data->sourceId); + + pr_info(" errorClass = 0x%016llx\n", data->errorClass); + pr_info(" correlator = 0x%016llx\n", data->correlator); + + pr_info(" p7iocPlssr = 0x%016llx\n", data->p7iocPlssr); + pr_info(" p7iocCsr = 0x%016llx\n", data->p7iocCsr); + pr_info(" lemFir = 0x%016llx\n", data->lemFir); + pr_info(" lemErrorMask = 0x%016llx\n", data->lemErrorMask); + pr_info(" lemWOF = 0x%016llx\n", data->lemWOF); + pr_info(" phbErrorStatus = 0x%016llx\n", data->phbErrorStatus); + pr_info(" phbFirstErrorStatus = 0x%016llx\n", data->phbFirstErrorStatus); + pr_info(" phbErrorLog0 = 0x%016llx\n", data->phbErrorLog0); + pr_info(" phbErrorLog1 = 0x%016llx\n", data->phbErrorLog1); + pr_info(" mmioErrorStatus = 0x%016llx\n", data->mmioErrorStatus); + pr_info(" mmioFirstErrorStatus = 0x%016llx\n", data->mmioFirstErrorStatus); + pr_info(" mmioErrorLog0 = 0x%016llx\n", data->mmioErrorLog0); + pr_info(" mmioErrorLog1 = 0x%016llx\n", data->mmioErrorLog1); + pr_info(" dma0ErrorStatus = 0x%016llx\n", data->dma0ErrorStatus); + pr_info(" dma0FirstErrorStatus = 0x%016llx\n", data->dma0FirstErrorStatus); + pr_info(" dma0ErrorLog0 = 0x%016llx\n", data->dma0ErrorLog0); + pr_info(" dma0ErrorLog1 = 0x%016llx\n", data->dma0ErrorLog1); + pr_info(" dma1ErrorStatus = 0x%016llx\n", data->dma1ErrorStatus); + pr_info(" dma1FirstErrorStatus = 0x%016llx\n", data->dma1FirstErrorStatus); + pr_info(" dma1ErrorLog0 = 0x%016llx\n", data->dma1ErrorLog0); + pr_info(" dma1ErrorLog1 = 0x%016llx\n", data->dma1ErrorLog1); + + for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) { + if ((data->pestA[i] >> 63) == 0 && + (data->pestB[i] >> 63) == 0) + continue; + pr_info(" PE[%3d] PESTA = 0x%016llx\n", i, data->pestA[i]); + pr_info(" PESTB = 0x%016llx\n", data->pestB[i]); + } +} + +static void pnv_pci_dump_phb_diag_data(struct pnv_phb *phb) +{ + switch(phb->model) { + case PNV_PHB_MODEL_P7IOC: + pnv_pci_dump_p7ioc_diag_data(phb); + break; + default: + pr_warning("PCI %d: Can't decode this PHB diag data\n", + phb->hose->global_number); + } +} + +static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no) +{ + unsigned long flags, rc; + int has_diag; + + spin_lock_irqsave(&phb->lock, flags); + + rc = opal_pci_get_phb_diag_data(phb->opal_id, phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE); + has_diag = (rc == OPAL_SUCCESS); + + rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no, + OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); + if (rc) { + pr_warning("PCI %d: Failed to clear EEH freeze state" + " for PE#%d, err %ld\n", + phb->hose->global_number, pe_no, rc); + + /* For now, let's only display the diag buffer when we fail to clear + * the EEH status. We'll do more sensible things later when we have + * proper EEH support. We need to make sure we don't pollute ourselves + * with the normal errors generated when probing empty slots + */ + if (has_diag) + pnv_pci_dump_phb_diag_data(phb); + else + pr_warning("PCI %d: No diag data available\n", + phb->hose->global_number); + } + + spin_unlock_irqrestore(&phb->lock, flags); +} + static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus, u32 bdfn) { @@ -165,15 +271,8 @@ static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus, } cfg_dbg(" -> EEH check, bdfn=%04x PE%d fstate=%x\n", bdfn, pe_no, fstate); - if (fstate != 0) { - rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no, - OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); - if (rc) { - pr_warning("PCI %d: Failed to clear EEH freeze state" - " for PE#%d, err %lld\n", - phb->hose->global_number, pe_no, rc); - } - } + if (fstate != 0) + pnv_pci_handle_eeh_config(phb, pe_no); } static int pnv_pci_read_config(struct pci_bus *bus, @@ -257,12 +356,54 @@ struct pci_ops pnv_pci_ops = { .write = pnv_pci_write_config, }; + +static void pnv_tce_invalidate(struct iommu_table *tbl, + u64 *startp, u64 *endp) +{ + u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index; + unsigned long start, end, inc; + + start = __pa(startp); + end = __pa(endp); + + + /* BML uses this case for p6/p7/galaxy2: Shift addr and put in node */ + if (tbl->it_busno) { + start <<= 12; + end <<= 12; + inc = 128 << 12; + start |= tbl->it_busno; + end |= tbl->it_busno; + } + /* p7ioc-style invalidation, 2 TCEs per write */ + else if (tbl->it_type & TCE_PCI_SWINV_PAIR) { + start |= (1ull << 63); + end |= (1ull << 63); + inc = 16; + } + /* Default (older HW) */ + else + inc = 128; + + end |= inc - 1; /* round up end to be different than start */ + + mb(); /* Ensure above stores are visible */ + while (start <= end) { + __raw_writeq(start, invalidate); + start += inc; + } + /* The iommu layer will do another mb() for us on build() and + * we don't care on free() + */ +} + + static int pnv_tce_build(struct iommu_table *tbl, long index, long npages, unsigned long uaddr, enum dma_data_direction direction, struct dma_attrs *attrs) { u64 proto_tce; - u64 *tcep; + u64 *tcep, *tces; u64 rpn; proto_tce = TCE_PCI_READ; // Read allowed @@ -270,25 +411,33 @@ static int pnv_tce_build(struct iommu_table *tbl, long index, long npages, if (direction != DMA_TO_DEVICE) proto_tce |= TCE_PCI_WRITE; - tcep = ((u64 *)tbl->it_base) + index; + tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset; + rpn = __pa(uaddr) >> TCE_SHIFT; - while (npages--) { - /* can't move this out since we might cross LMB boundary */ - rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT; - *tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT; + while (npages--) + *(tcep++) = proto_tce | (rpn++ << TCE_RPN_SHIFT); + + /* Some implementations won't cache invalid TCEs and thus may not + * need that flush. We'll probably turn it_type into a bit mask + * of flags if that becomes the case + */ + if (tbl->it_type & TCE_PCI_SWINV_CREATE) + pnv_tce_invalidate(tbl, tces, tcep - 1); - uaddr += TCE_PAGE_SIZE; - tcep++; - } return 0; } static void pnv_tce_free(struct iommu_table *tbl, long index, long npages) { - u64 *tcep = ((u64 *)tbl->it_base) + index; + u64 *tcep, *tces; + + tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset; while (npages--) *(tcep++) = 0; + + if (tbl->it_type & TCE_PCI_SWINV_FREE) + pnv_tce_invalidate(tbl, tces, tcep - 1); } void pnv_pci_setup_iommu_table(struct iommu_table *tbl, @@ -308,13 +457,14 @@ static struct iommu_table * __devinit pnv_pci_setup_bml_iommu(struct pci_controller *hose) { struct iommu_table *tbl; - const __be64 *basep; + const __be64 *basep, *swinvp; const __be32 *sizep; basep = of_get_property(hose->dn, "linux,tce-base", NULL); sizep = of_get_property(hose->dn, "linux,tce-size", NULL); if (basep == NULL || sizep == NULL) { - pr_err("PCI: %s has missing tce entries !\n", hose->dn->full_name); + pr_err("PCI: %s has missing tce entries !\n", + hose->dn->full_name); return NULL; } tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, hose->node); @@ -323,6 +473,15 @@ pnv_pci_setup_bml_iommu(struct pci_controller *hose) pnv_pci_setup_iommu_table(tbl, __va(be64_to_cpup(basep)), be32_to_cpup(sizep), 0); iommu_init_table(tbl, hose->node); + + /* Deal with SW invalidated TCEs when needed (BML way) */ + swinvp = of_get_property(hose->dn, "linux,tce-sw-invalidate-info", + NULL); + if (swinvp) { + tbl->it_busno = swinvp[1]; + tbl->it_index = (unsigned long)ioremap(swinvp[0], 8); + tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE; + } return tbl; } @@ -356,6 +515,13 @@ static void __devinit pnv_pci_dma_dev_setup(struct pci_dev *pdev) pnv_pci_dma_fallback_setup(hose, pdev); } +/* Fixup wrong class code in p7ioc root complex */ +static void __devinit pnv_p7ioc_rc_quirk(struct pci_dev *dev) +{ + dev->class = PCI_CLASS_BRIDGE_PCI << 8; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x3b9, pnv_p7ioc_rc_quirk); + static int pnv_pci_probe_mode(struct pci_bus *bus) { struct pci_controller *hose = pci_bus_to_host(bus); @@ -400,12 +566,24 @@ void __init pnv_pci_init(void) init_pci_config_tokens(); find_and_init_phbs(); #endif /* CONFIG_PPC_POWERNV_RTAS */ - } else { - /* OPAL is here, do our normal stuff */ + } + /* OPAL is here, do our normal stuff */ + else { + int found_ioda = 0; + + /* Look for IODA IO-Hubs. We don't support mixing IODA + * and p5ioc2 due to the need to change some global + * probing flags + */ + for_each_compatible_node(np, NULL, "ibm,ioda-hub") { + pnv_pci_init_ioda_hub(np); + found_ioda = 1; + } /* Look for p5ioc2 IO-Hubs */ - for_each_compatible_node(np, NULL, "ibm,p5ioc2") - pnv_pci_init_p5ioc2_hub(np); + if (!found_ioda) + for_each_compatible_node(np, NULL, "ibm,p5ioc2") + pnv_pci_init_p5ioc2_hub(np); } /* Setup the linkage between OF nodes and PHBs */ diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index d4dbc4950936..8bc479634643 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -9,9 +9,63 @@ enum pnv_phb_type { PNV_PHB_IODA2, }; +/* Precise PHB model for error management */ +enum pnv_phb_model { + PNV_PHB_MODEL_UNKNOWN, + PNV_PHB_MODEL_P5IOC2, + PNV_PHB_MODEL_P7IOC, +}; + +#define PNV_PCI_DIAG_BUF_SIZE 4096 + +/* Data associated with a PE, including IOMMU tracking etc.. */ +struct pnv_ioda_pe { + /* A PE can be associated with a single device or an + * entire bus (& children). In the former case, pdev + * is populated, in the later case, pbus is. + */ + struct pci_dev *pdev; + struct pci_bus *pbus; + + /* Effective RID (device RID for a device PE and base bus + * RID with devfn 0 for a bus PE) + */ + unsigned int rid; + + /* PE number */ + unsigned int pe_number; + + /* "Weight" assigned to the PE for the sake of DMA resource + * allocations + */ + unsigned int dma_weight; + + /* This is a PCI-E -> PCI-X bridge, this points to the + * corresponding bus PE + */ + struct pnv_ioda_pe *bus_pe; + + /* "Base" iommu table, ie, 4K TCEs, 32-bit DMA */ + int tce32_seg; + int tce32_segcount; + struct iommu_table tce32_table; + + /* XXX TODO: Add support for additional 64-bit iommus */ + + /* MSIs. MVE index is identical for for 32 and 64 bit MSI + * and -1 if not supported. (It's actually identical to the + * PE number) + */ + int mve_number; + + /* Link in list of PE#s */ + struct list_head link; +}; + struct pnv_phb { struct pci_controller *hose; enum pnv_phb_type type; + enum pnv_phb_model model; u64 opal_id; void __iomem *regs; spinlock_t lock; @@ -34,7 +88,52 @@ struct pnv_phb { struct { struct iommu_table iommu_table; } p5ioc2; + + struct { + /* Global bridge info */ + unsigned int total_pe; + unsigned int m32_size; + unsigned int m32_segsize; + unsigned int m32_pci_base; + unsigned int io_size; + unsigned int io_segsize; + unsigned int io_pci_base; + + /* PE allocation bitmap */ + unsigned long *pe_alloc; + + /* M32 & IO segment maps */ + unsigned int *m32_segmap; + unsigned int *io_segmap; + struct pnv_ioda_pe *pe_array; + + /* Reverse map of PEs, will have to extend if + * we are to support more than 256 PEs, indexed + * bus { bus, devfn } + */ + unsigned char pe_rmap[0x10000]; + + /* 32-bit TCE tables allocation */ + unsigned long tce32_count; + + /* Total "weight" for the sake of DMA resources + * allocation + */ + unsigned int dma_weight; + unsigned int dma_pe_count; + + /* Sorted list of used PE's, sorted at + * boot for resource allocation purposes + */ + struct list_head pe_list; + } ioda; }; + + /* PHB status structure */ + union { + unsigned char blob[PNV_PCI_DIAG_BUF_SIZE]; + struct OpalIoP7IOCPhbErrorData p7ioc; + } diag; }; extern struct pci_ops pnv_pci_ops; @@ -43,6 +142,7 @@ extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl, void *tce_mem, u64 tce_size, u64 dma_offset); extern void pnv_pci_init_p5ioc2_hub(struct device_node *np); +extern void pnv_pci_init_ioda_hub(struct device_node *np); #endif /* __POWERNV_PCI_H */ diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c index e87736685243..17210c526c52 100644 --- a/arch/powerpc/platforms/powernv/smp.c +++ b/arch/powerpc/platforms/powernv/smp.c @@ -75,7 +75,7 @@ int __devinit pnv_smp_kick_cpu(int nr) /* On OPAL v2 the CPU are still spinning inside OPAL itself, * get them back now */ - if (firmware_has_feature(FW_FEATURE_OPALv2)) { + if (!paca[nr].cpu_start && firmware_has_feature(FW_FEATURE_OPALv2)) { pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", nr, pcpu); rc = opal_start_cpu(pcpu, start_here); if (rc != OPAL_SUCCESS) diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index 1d6f4f478fe2..617efa12a3a5 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -31,18 +31,18 @@ #if defined(DEBUG) #define DBG udbg_printf +#define FAIL udbg_printf #else -#define DBG pr_debug +#define DBG pr_devel +#define FAIL pr_debug #endif /** * struct ps3_bmp - a per cpu irq status and mask bitmap structure * @status: 256 bit status bitmap indexed by plug - * @unused_1: + * @unused_1: Alignment * @mask: 256 bit mask bitmap indexed by plug - * @unused_2: - * @lock: - * @ipi_debug_brk_mask: + * @unused_2: Alignment * * The HV maintains per SMT thread mappings of HV outlet to HV plug on * behalf of the guest. These mappings are implemented as 256 bit guest @@ -73,21 +73,24 @@ struct ps3_bmp { unsigned long mask; u64 unused_2[3]; }; - u64 ipi_debug_brk_mask; - spinlock_t lock; }; /** * struct ps3_private - a per cpu data structure * @bmp: ps3_bmp structure + * @bmp_lock: Syncronize access to bmp. + * @ipi_debug_brk_mask: Mask for debug break IPIs * @ppe_id: HV logical_ppe_id * @thread_id: HV thread_id + * @ipi_mask: Mask of IPI virqs */ struct ps3_private { struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN))); + spinlock_t bmp_lock; u64 ppe_id; u64 thread_id; + unsigned long ipi_debug_brk_mask; unsigned long ipi_mask; }; @@ -105,7 +108,7 @@ static void ps3_chip_mask(struct irq_data *d) struct ps3_private *pd = irq_data_get_irq_chip_data(d); unsigned long flags; - pr_debug("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__, + DBG("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__, pd->thread_id, d->irq); local_irq_save(flags); @@ -126,7 +129,7 @@ static void ps3_chip_unmask(struct irq_data *d) struct ps3_private *pd = irq_data_get_irq_chip_data(d); unsigned long flags; - pr_debug("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__, + DBG("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__, pd->thread_id, d->irq); local_irq_save(flags); @@ -190,19 +193,19 @@ static int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet, *virq = irq_create_mapping(NULL, outlet); if (*virq == NO_IRQ) { - pr_debug("%s:%d: irq_create_mapping failed: outlet %lu\n", + FAIL("%s:%d: irq_create_mapping failed: outlet %lu\n", __func__, __LINE__, outlet); result = -ENOMEM; goto fail_create; } - pr_debug("%s:%d: outlet %lu => cpu %u, virq %u\n", __func__, __LINE__, + DBG("%s:%d: outlet %lu => cpu %u, virq %u\n", __func__, __LINE__, outlet, cpu, *virq); result = irq_set_chip_data(*virq, pd); if (result) { - pr_debug("%s:%d: irq_set_chip_data failed\n", + FAIL("%s:%d: irq_set_chip_data failed\n", __func__, __LINE__); goto fail_set; } @@ -228,13 +231,13 @@ static int ps3_virq_destroy(unsigned int virq) { const struct ps3_private *pd = irq_get_chip_data(virq); - pr_debug("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__, + DBG("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__, __LINE__, pd->ppe_id, pd->thread_id, virq); irq_set_chip_data(virq, NULL); irq_dispose_mapping(virq); - pr_debug("%s:%d <-\n", __func__, __LINE__); + DBG("%s:%d <-\n", __func__, __LINE__); return 0; } @@ -257,7 +260,7 @@ int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet, result = ps3_virq_setup(cpu, outlet, virq); if (result) { - pr_debug("%s:%d: ps3_virq_setup failed\n", __func__, __LINE__); + FAIL("%s:%d: ps3_virq_setup failed\n", __func__, __LINE__); goto fail_setup; } @@ -269,7 +272,7 @@ int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet, outlet, 0); if (result) { - pr_info("%s:%d: lv1_connect_irq_plug_ext failed: %s\n", + FAIL("%s:%d: lv1_connect_irq_plug_ext failed: %s\n", __func__, __LINE__, ps3_result(result)); result = -EPERM; goto fail_connect; @@ -298,7 +301,7 @@ int ps3_irq_plug_destroy(unsigned int virq) int result; const struct ps3_private *pd = irq_get_chip_data(virq); - pr_debug("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__, + DBG("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__, __LINE__, pd->ppe_id, pd->thread_id, virq); ps3_chip_mask(irq_get_irq_data(virq)); @@ -306,7 +309,7 @@ int ps3_irq_plug_destroy(unsigned int virq) result = lv1_disconnect_irq_plug_ext(pd->ppe_id, pd->thread_id, virq); if (result) - pr_info("%s:%d: lv1_disconnect_irq_plug_ext failed: %s\n", + FAIL("%s:%d: lv1_disconnect_irq_plug_ext failed: %s\n", __func__, __LINE__, ps3_result(result)); ps3_virq_destroy(virq); @@ -334,7 +337,7 @@ int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq) result = lv1_construct_event_receive_port(&outlet); if (result) { - pr_debug("%s:%d: lv1_construct_event_receive_port failed: %s\n", + FAIL("%s:%d: lv1_construct_event_receive_port failed: %s\n", __func__, __LINE__, ps3_result(result)); *virq = NO_IRQ; return result; @@ -360,14 +363,14 @@ int ps3_event_receive_port_destroy(unsigned int virq) { int result; - pr_debug(" -> %s:%d virq %u\n", __func__, __LINE__, virq); + DBG(" -> %s:%d virq %u\n", __func__, __LINE__, virq); ps3_chip_mask(irq_get_irq_data(virq)); result = lv1_destruct_event_receive_port(virq_to_hw(virq)); if (result) - pr_debug("%s:%d: lv1_destruct_event_receive_port failed: %s\n", + FAIL("%s:%d: lv1_destruct_event_receive_port failed: %s\n", __func__, __LINE__, ps3_result(result)); /* @@ -375,7 +378,7 @@ int ps3_event_receive_port_destroy(unsigned int virq) * calls from interrupt context (smp_call_function) when kexecing. */ - pr_debug(" <- %s:%d\n", __func__, __LINE__); + DBG(" <- %s:%d\n", __func__, __LINE__); return result; } @@ -411,7 +414,7 @@ int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev, dev->dev_id, virq_to_hw(*virq), dev->interrupt_id); if (result) { - pr_debug("%s:%d: lv1_connect_interrupt_event_receive_port" + FAIL("%s:%d: lv1_connect_interrupt_event_receive_port" " failed: %s\n", __func__, __LINE__, ps3_result(result)); ps3_event_receive_port_destroy(*virq); @@ -419,7 +422,7 @@ int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev, return result; } - pr_debug("%s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__, + DBG("%s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__, dev->interrupt_id, *virq); return 0; @@ -433,14 +436,14 @@ int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev, int result; - pr_debug(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__, + DBG(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__, dev->interrupt_id, virq); result = lv1_disconnect_interrupt_event_receive_port(dev->bus_id, dev->dev_id, virq_to_hw(virq), dev->interrupt_id); if (result) - pr_debug("%s:%d: lv1_disconnect_interrupt_event_receive_port" + FAIL("%s:%d: lv1_disconnect_interrupt_event_receive_port" " failed: %s\n", __func__, __LINE__, ps3_result(result)); @@ -455,7 +458,7 @@ int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev, result = ps3_virq_destroy(virq); BUG_ON(result); - pr_debug(" <- %s:%d\n", __func__, __LINE__); + DBG(" <- %s:%d\n", __func__, __LINE__); return result; } EXPORT_SYMBOL(ps3_sb_event_receive_port_destroy); @@ -480,7 +483,7 @@ int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id, result = lv1_construct_io_irq_outlet(interrupt_id, &outlet); if (result) { - pr_debug("%s:%d: lv1_construct_io_irq_outlet failed: %s\n", + FAIL("%s:%d: lv1_construct_io_irq_outlet failed: %s\n", __func__, __LINE__, ps3_result(result)); return result; } @@ -510,7 +513,7 @@ int ps3_io_irq_destroy(unsigned int virq) result = lv1_destruct_io_irq_outlet(outlet); if (result) - pr_debug("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n", + FAIL("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n", __func__, __LINE__, ps3_result(result)); return result; @@ -542,7 +545,7 @@ int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp, result = lv1_configure_virtual_uart_irq(lpar_addr, &outlet); if (result) { - pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n", + FAIL("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n", __func__, __LINE__, ps3_result(result)); return result; } @@ -562,7 +565,7 @@ int ps3_vuart_irq_destroy(unsigned int virq) result = lv1_deconfigure_virtual_uart_irq(); if (result) { - pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n", + FAIL("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n", __func__, __LINE__, ps3_result(result)); return result; } @@ -595,7 +598,7 @@ int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id, result = lv1_get_spe_irq_outlet(spe_id, class, &outlet); if (result) { - pr_debug("%s:%d: lv1_get_spe_irq_outlet failed: %s\n", + FAIL("%s:%d: lv1_get_spe_irq_outlet failed: %s\n", __func__, __LINE__, ps3_result(result)); return result; } @@ -626,7 +629,7 @@ int ps3_spe_irq_destroy(unsigned int virq) static void _dump_64_bmp(const char *header, const u64 *p, unsigned cpu, const char* func, int line) { - pr_debug("%s:%d: %s %u {%04lx_%04lx_%04lx_%04lx}\n", + pr_debug("%s:%d: %s %u {%04llx_%04llx_%04llx_%04llx}\n", func, line, header, cpu, *p >> 48, (*p >> 32) & 0xffff, (*p >> 16) & 0xffff, *p & 0xffff); @@ -635,7 +638,7 @@ static void _dump_64_bmp(const char *header, const u64 *p, unsigned cpu, static void __maybe_unused _dump_256_bmp(const char *header, const u64 *p, unsigned cpu, const char* func, int line) { - pr_debug("%s:%d: %s %u {%016lx:%016lx:%016lx:%016lx}\n", + pr_debug("%s:%d: %s %u {%016llx:%016llx:%016llx:%016llx}\n", func, line, header, cpu, p[0], p[1], p[2], p[3]); } @@ -644,10 +647,10 @@ static void _dump_bmp(struct ps3_private* pd, const char* func, int line) { unsigned long flags; - spin_lock_irqsave(&pd->bmp.lock, flags); + spin_lock_irqsave(&pd->bmp_lock, flags); _dump_64_bmp("stat", &pd->bmp.status, pd->thread_id, func, line); - _dump_64_bmp("mask", &pd->bmp.mask, pd->thread_id, func, line); - spin_unlock_irqrestore(&pd->bmp.lock, flags); + _dump_64_bmp("mask", (u64*)&pd->bmp.mask, pd->thread_id, func, line); + spin_unlock_irqrestore(&pd->bmp_lock, flags); } #define dump_mask(_x) _dump_mask(_x, __func__, __LINE__) @@ -656,9 +659,9 @@ static void __maybe_unused _dump_mask(struct ps3_private *pd, { unsigned long flags; - spin_lock_irqsave(&pd->bmp.lock, flags); - _dump_64_bmp("mask", &pd->bmp.mask, pd->thread_id, func, line); - spin_unlock_irqrestore(&pd->bmp.lock, flags); + spin_lock_irqsave(&pd->bmp_lock, flags); + _dump_64_bmp("mask", (u64*)&pd->bmp.mask, pd->thread_id, func, line); + spin_unlock_irqrestore(&pd->bmp_lock, flags); } #else static void dump_bmp(struct ps3_private* pd) {}; @@ -667,7 +670,7 @@ static void dump_bmp(struct ps3_private* pd) {}; static int ps3_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hwirq) { - pr_debug("%s:%d: hwirq %lu, virq %u\n", __func__, __LINE__, hwirq, + DBG("%s:%d: hwirq %lu, virq %u\n", __func__, __LINE__, hwirq, virq); irq_set_chip_and_handler(virq, &ps3_irq_chip, handle_fasteoi_irq); @@ -690,10 +693,10 @@ void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq) { struct ps3_private *pd = &per_cpu(ps3_private, cpu); - pd->bmp.ipi_debug_brk_mask = 0x8000000000000000UL >> virq; + set_bit(63 - virq, &pd->ipi_debug_brk_mask); - pr_debug("%s:%d: cpu %u, virq %u, mask %llxh\n", __func__, __LINE__, - cpu, virq, pd->bmp.ipi_debug_brk_mask); + DBG("%s:%d: cpu %u, virq %u, mask %lxh\n", __func__, __LINE__, + cpu, virq, pd->ipi_debug_brk_mask); } void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq) @@ -714,14 +717,14 @@ static unsigned int ps3_get_irq(void) /* check for ipi break first to stop this cpu ASAP */ - if (x & pd->bmp.ipi_debug_brk_mask) - x &= pd->bmp.ipi_debug_brk_mask; + if (x & pd->ipi_debug_brk_mask) + x &= pd->ipi_debug_brk_mask; asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x)); plug &= 0x3f; if (unlikely(plug == NO_IRQ)) { - pr_debug("%s:%d: no plug found: thread_id %llu\n", __func__, + DBG("%s:%d: no plug found: thread_id %llu\n", __func__, __LINE__, pd->thread_id); dump_bmp(&per_cpu(ps3_private, 0)); dump_bmp(&per_cpu(ps3_private, 1)); @@ -760,9 +763,9 @@ void __init ps3_init_IRQ(void) lv1_get_logical_ppe_id(&pd->ppe_id); pd->thread_id = get_hard_smp_processor_id(cpu); - spin_lock_init(&pd->bmp.lock); + spin_lock_init(&pd->bmp_lock); - pr_debug("%s:%d: ppe_id %llu, thread_id %llu, bmp %lxh\n", + DBG("%s:%d: ppe_id %llu, thread_id %llu, bmp %lxh\n", __func__, __LINE__, pd->ppe_id, pd->thread_id, ps3_mm_phys_to_lpar(__pa(&pd->bmp))); @@ -770,7 +773,7 @@ void __init ps3_init_IRQ(void) pd->thread_id, ps3_mm_phys_to_lpar(__pa(&pd->bmp))); if (result) - pr_debug("%s:%d: lv1_configure_irq_state_bitmap failed:" + FAIL("%s:%d: lv1_configure_irq_state_bitmap failed:" " %s\n", __func__, __LINE__, ps3_result(result)); } diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c index 72714ad27842..8bd6ba542691 100644 --- a/arch/powerpc/platforms/ps3/mm.c +++ b/arch/powerpc/platforms/ps3/mm.c @@ -319,7 +319,6 @@ static int __init ps3_mm_add_memory(void) } memblock_add(start_addr, map.r1.size); - memblock_analyze(); result = online_pages(start_pfn, nr_pages); diff --git a/arch/powerpc/platforms/ps3/repository.c b/arch/powerpc/platforms/ps3/repository.c index ca40f6afd35d..7bdfea336f5e 100644 --- a/arch/powerpc/platforms/ps3/repository.c +++ b/arch/powerpc/platforms/ps3/repository.c @@ -44,7 +44,7 @@ static void _dump_field(const char *hdr, u64 n, const char *func, int line) s[i] = (in[i] <= 126 && in[i] >= 32) ? in[i] : '.'; s[i] = 0; - pr_debug("%s:%d: %s%016llx : %s\n", func, line, hdr, n, s); + pr_devel("%s:%d: %s%016llx : %s\n", func, line, hdr, n, s); #endif } @@ -53,7 +53,7 @@ static void _dump_field(const char *hdr, u64 n, const char *func, int line) static void _dump_node_name(unsigned int lpar_id, u64 n1, u64 n2, u64 n3, u64 n4, const char *func, int line) { - pr_debug("%s:%d: lpar: %u\n", func, line, lpar_id); + pr_devel("%s:%d: lpar: %u\n", func, line, lpar_id); _dump_field("n1: ", n1, func, line); _dump_field("n2: ", n2, func, line); _dump_field("n3: ", n3, func, line); @@ -65,13 +65,13 @@ static void _dump_node_name(unsigned int lpar_id, u64 n1, u64 n2, u64 n3, static void _dump_node(unsigned int lpar_id, u64 n1, u64 n2, u64 n3, u64 n4, u64 v1, u64 v2, const char *func, int line) { - pr_debug("%s:%d: lpar: %u\n", func, line, lpar_id); + pr_devel("%s:%d: lpar: %u\n", func, line, lpar_id); _dump_field("n1: ", n1, func, line); _dump_field("n2: ", n2, func, line); _dump_field("n3: ", n3, func, line); _dump_field("n4: ", n4, func, line); - pr_debug("%s:%d: v1: %016llx\n", func, line, v1); - pr_debug("%s:%d: v2: %016llx\n", func, line, v2); + pr_devel("%s:%d: v1: %016llx\n", func, line, v1); + pr_devel("%s:%d: v2: %016llx\n", func, line, v2); } /** @@ -131,11 +131,11 @@ static int read_node(unsigned int lpar_id, u64 n1, u64 n2, u64 n3, u64 n4, lpar_id = id; } - result = lv1_get_repository_node_value(lpar_id, n1, n2, n3, n4, &v1, + result = lv1_read_repository_node(lpar_id, n1, n2, n3, n4, &v1, &v2); if (result) { - pr_debug("%s:%d: lv1_get_repository_node_value failed: %s\n", + pr_warn("%s:%d: lv1_read_repository_node failed: %s\n", __func__, __LINE__, ps3_result(result)); dump_node_name(lpar_id, n1, n2, n3, n4); return -ENOENT; @@ -149,10 +149,10 @@ static int read_node(unsigned int lpar_id, u64 n1, u64 n2, u64 n3, u64 n4, *_v2 = v2; if (v1 && !_v1) - pr_debug("%s:%d: warning: discarding non-zero v1: %016llx\n", + pr_devel("%s:%d: warning: discarding non-zero v1: %016llx\n", __func__, __LINE__, v1); if (v2 && !_v2) - pr_debug("%s:%d: warning: discarding non-zero v2: %016llx\n", + pr_devel("%s:%d: warning: discarding non-zero v2: %016llx\n", __func__, __LINE__, v2); return 0; @@ -323,16 +323,16 @@ int ps3_repository_find_device(struct ps3_repository_device *repo) result = ps3_repository_read_bus_num_dev(tmp.bus_index, &num_dev); if (result) { - pr_debug("%s:%d read_bus_num_dev failed\n", __func__, __LINE__); + pr_devel("%s:%d read_bus_num_dev failed\n", __func__, __LINE__); return result; } - pr_debug("%s:%d: bus_type %u, bus_index %u, bus_id %llu, num_dev %u\n", + pr_devel("%s:%d: bus_type %u, bus_index %u, bus_id %llu, num_dev %u\n", __func__, __LINE__, tmp.bus_type, tmp.bus_index, tmp.bus_id, num_dev); if (tmp.dev_index >= num_dev) { - pr_debug("%s:%d: no device found\n", __func__, __LINE__); + pr_devel("%s:%d: no device found\n", __func__, __LINE__); return -ENODEV; } @@ -340,7 +340,7 @@ int ps3_repository_find_device(struct ps3_repository_device *repo) &tmp.dev_type); if (result) { - pr_debug("%s:%d read_dev_type failed\n", __func__, __LINE__); + pr_devel("%s:%d read_dev_type failed\n", __func__, __LINE__); return result; } @@ -348,12 +348,12 @@ int ps3_repository_find_device(struct ps3_repository_device *repo) &tmp.dev_id); if (result) { - pr_debug("%s:%d ps3_repository_read_dev_id failed\n", __func__, + pr_devel("%s:%d ps3_repository_read_dev_id failed\n", __func__, __LINE__); return result; } - pr_debug("%s:%d: found: dev_type %u, dev_index %u, dev_id %llu\n", + pr_devel("%s:%d: found: dev_type %u, dev_index %u, dev_id %llu\n", __func__, __LINE__, tmp.dev_type, tmp.dev_index, tmp.dev_id); *repo = tmp; @@ -367,14 +367,14 @@ int ps3_repository_find_device_by_id(struct ps3_repository_device *repo, struct ps3_repository_device tmp; unsigned int num_dev; - pr_debug(" -> %s:%u: find device by id %llu:%llu\n", __func__, __LINE__, + pr_devel(" -> %s:%u: find device by id %llu:%llu\n", __func__, __LINE__, bus_id, dev_id); for (tmp.bus_index = 0; tmp.bus_index < 10; tmp.bus_index++) { result = ps3_repository_read_bus_id(tmp.bus_index, &tmp.bus_id); if (result) { - pr_debug("%s:%u read_bus_id(%u) failed\n", __func__, + pr_devel("%s:%u read_bus_id(%u) failed\n", __func__, __LINE__, tmp.bus_index); return result; } @@ -382,23 +382,23 @@ int ps3_repository_find_device_by_id(struct ps3_repository_device *repo, if (tmp.bus_id == bus_id) goto found_bus; - pr_debug("%s:%u: skip, bus_id %llu\n", __func__, __LINE__, + pr_devel("%s:%u: skip, bus_id %llu\n", __func__, __LINE__, tmp.bus_id); } - pr_debug(" <- %s:%u: bus not found\n", __func__, __LINE__); + pr_devel(" <- %s:%u: bus not found\n", __func__, __LINE__); return result; found_bus: result = ps3_repository_read_bus_type(tmp.bus_index, &tmp.bus_type); if (result) { - pr_debug("%s:%u read_bus_type(%u) failed\n", __func__, + pr_devel("%s:%u read_bus_type(%u) failed\n", __func__, __LINE__, tmp.bus_index); return result; } result = ps3_repository_read_bus_num_dev(tmp.bus_index, &num_dev); if (result) { - pr_debug("%s:%u read_bus_num_dev failed\n", __func__, + pr_devel("%s:%u read_bus_num_dev failed\n", __func__, __LINE__); return result; } @@ -408,7 +408,7 @@ found_bus: tmp.dev_index, &tmp.dev_id); if (result) { - pr_debug("%s:%u read_dev_id(%u:%u) failed\n", __func__, + pr_devel("%s:%u read_dev_id(%u:%u) failed\n", __func__, __LINE__, tmp.bus_index, tmp.dev_index); return result; } @@ -416,21 +416,21 @@ found_bus: if (tmp.dev_id == dev_id) goto found_dev; - pr_debug("%s:%u: skip, dev_id %llu\n", __func__, __LINE__, + pr_devel("%s:%u: skip, dev_id %llu\n", __func__, __LINE__, tmp.dev_id); } - pr_debug(" <- %s:%u: dev not found\n", __func__, __LINE__); + pr_devel(" <- %s:%u: dev not found\n", __func__, __LINE__); return result; found_dev: result = ps3_repository_read_dev_type(tmp.bus_index, tmp.dev_index, &tmp.dev_type); if (result) { - pr_debug("%s:%u read_dev_type failed\n", __func__, __LINE__); + pr_devel("%s:%u read_dev_type failed\n", __func__, __LINE__); return result; } - pr_debug(" <- %s:%u: found: type (%u:%u) index (%u:%u) id (%llu:%llu)\n", + pr_devel(" <- %s:%u: found: type (%u:%u) index (%u:%u) id (%llu:%llu)\n", __func__, __LINE__, tmp.bus_type, tmp.dev_type, tmp.bus_index, tmp.dev_index, tmp.bus_id, tmp.dev_id); *repo = tmp; @@ -443,18 +443,18 @@ int __devinit ps3_repository_find_devices(enum ps3_bus_type bus_type, int result = 0; struct ps3_repository_device repo; - pr_debug(" -> %s:%d: find bus_type %u\n", __func__, __LINE__, bus_type); + pr_devel(" -> %s:%d: find bus_type %u\n", __func__, __LINE__, bus_type); repo.bus_type = bus_type; result = ps3_repository_find_bus(repo.bus_type, 0, &repo.bus_index); if (result) { - pr_debug(" <- %s:%u: bus not found\n", __func__, __LINE__); + pr_devel(" <- %s:%u: bus not found\n", __func__, __LINE__); return result; } result = ps3_repository_read_bus_id(repo.bus_index, &repo.bus_id); if (result) { - pr_debug("%s:%d read_bus_id(%u) failed\n", __func__, __LINE__, + pr_devel("%s:%d read_bus_id(%u) failed\n", __func__, __LINE__, repo.bus_index); return result; } @@ -469,13 +469,13 @@ int __devinit ps3_repository_find_devices(enum ps3_bus_type bus_type, result = callback(&repo); if (result) { - pr_debug("%s:%d: abort at callback\n", __func__, + pr_devel("%s:%d: abort at callback\n", __func__, __LINE__); break; } } - pr_debug(" <- %s:%d\n", __func__, __LINE__); + pr_devel(" <- %s:%d\n", __func__, __LINE__); return result; } @@ -489,7 +489,7 @@ int ps3_repository_find_bus(enum ps3_bus_type bus_type, unsigned int from, for (i = from; i < 10; i++) { error = ps3_repository_read_bus_type(i, &type); if (error) { - pr_debug("%s:%d read_bus_type failed\n", + pr_devel("%s:%d read_bus_type failed\n", __func__, __LINE__); *bus_index = UINT_MAX; return error; @@ -509,7 +509,7 @@ int ps3_repository_find_interrupt(const struct ps3_repository_device *repo, int result = 0; unsigned int res_index; - pr_debug("%s:%d: find intr_type %u\n", __func__, __LINE__, intr_type); + pr_devel("%s:%d: find intr_type %u\n", __func__, __LINE__, intr_type); *interrupt_id = UINT_MAX; @@ -521,7 +521,7 @@ int ps3_repository_find_interrupt(const struct ps3_repository_device *repo, repo->dev_index, res_index, &t, &id); if (result) { - pr_debug("%s:%d read_dev_intr failed\n", + pr_devel("%s:%d read_dev_intr failed\n", __func__, __LINE__); return result; } @@ -535,7 +535,7 @@ int ps3_repository_find_interrupt(const struct ps3_repository_device *repo, if (res_index == 10) return -ENODEV; - pr_debug("%s:%d: found intr_type %u at res_index %u\n", + pr_devel("%s:%d: found intr_type %u at res_index %u\n", __func__, __LINE__, intr_type, res_index); return result; @@ -547,7 +547,7 @@ int ps3_repository_find_reg(const struct ps3_repository_device *repo, int result = 0; unsigned int res_index; - pr_debug("%s:%d: find reg_type %u\n", __func__, __LINE__, reg_type); + pr_devel("%s:%d: find reg_type %u\n", __func__, __LINE__, reg_type); *bus_addr = *len = 0; @@ -560,7 +560,7 @@ int ps3_repository_find_reg(const struct ps3_repository_device *repo, repo->dev_index, res_index, &t, &a, &l); if (result) { - pr_debug("%s:%d read_dev_reg failed\n", + pr_devel("%s:%d read_dev_reg failed\n", __func__, __LINE__); return result; } @@ -575,7 +575,7 @@ int ps3_repository_find_reg(const struct ps3_repository_device *repo, if (res_index == 10) return -ENODEV; - pr_debug("%s:%d: found reg_type %u at res_index %u\n", + pr_devel("%s:%d: found reg_type %u at res_index %u\n", __func__, __LINE__, reg_type, res_index); return result; @@ -1009,7 +1009,7 @@ int ps3_repository_dump_resource_info(const struct ps3_repository_device *repo) int result = 0; unsigned int res_index; - pr_debug(" -> %s:%d: (%u:%u)\n", __func__, __LINE__, + pr_devel(" -> %s:%d: (%u:%u)\n", __func__, __LINE__, repo->bus_index, repo->dev_index); for (res_index = 0; res_index < 10; res_index++) { @@ -1021,13 +1021,13 @@ int ps3_repository_dump_resource_info(const struct ps3_repository_device *repo) if (result) { if (result != LV1_NO_ENTRY) - pr_debug("%s:%d ps3_repository_read_dev_intr" + pr_devel("%s:%d ps3_repository_read_dev_intr" " (%u:%u) failed\n", __func__, __LINE__, repo->bus_index, repo->dev_index); break; } - pr_debug("%s:%d (%u:%u) intr_type %u, interrupt_id %u\n", + pr_devel("%s:%d (%u:%u) intr_type %u, interrupt_id %u\n", __func__, __LINE__, repo->bus_index, repo->dev_index, intr_type, interrupt_id); } @@ -1042,18 +1042,18 @@ int ps3_repository_dump_resource_info(const struct ps3_repository_device *repo) if (result) { if (result != LV1_NO_ENTRY) - pr_debug("%s:%d ps3_repository_read_dev_reg" + pr_devel("%s:%d ps3_repository_read_dev_reg" " (%u:%u) failed\n", __func__, __LINE__, repo->bus_index, repo->dev_index); break; } - pr_debug("%s:%d (%u:%u) reg_type %u, bus_addr %lxh, len %lxh\n", + pr_devel("%s:%d (%u:%u) reg_type %u, bus_addr %llxh, len %llxh\n", __func__, __LINE__, repo->bus_index, repo->dev_index, reg_type, bus_addr, len); } - pr_debug(" <- %s:%d\n", __func__, __LINE__); + pr_devel(" <- %s:%d\n", __func__, __LINE__); return result; } @@ -1063,22 +1063,22 @@ static int dump_stor_dev_info(struct ps3_repository_device *repo) unsigned int num_regions, region_index; u64 port, blk_size, num_blocks; - pr_debug(" -> %s:%d: (%u:%u)\n", __func__, __LINE__, + pr_devel(" -> %s:%d: (%u:%u)\n", __func__, __LINE__, repo->bus_index, repo->dev_index); result = ps3_repository_read_stor_dev_info(repo->bus_index, repo->dev_index, &port, &blk_size, &num_blocks, &num_regions); if (result) { - pr_debug("%s:%d ps3_repository_read_stor_dev_info" + pr_devel("%s:%d ps3_repository_read_stor_dev_info" " (%u:%u) failed\n", __func__, __LINE__, repo->bus_index, repo->dev_index); goto out; } - pr_debug("%s:%d (%u:%u): port %lu, blk_size %lu, num_blocks " - "%lu, num_regions %u\n", - __func__, __LINE__, repo->bus_index, repo->dev_index, port, - blk_size, num_blocks, num_regions); + pr_devel("%s:%d (%u:%u): port %llu, blk_size %llu, num_blocks " + "%llu, num_regions %u\n", + __func__, __LINE__, repo->bus_index, repo->dev_index, + port, blk_size, num_blocks, num_regions); for (region_index = 0; region_index < num_regions; region_index++) { unsigned int region_id; @@ -1088,19 +1088,20 @@ static int dump_stor_dev_info(struct ps3_repository_device *repo) repo->dev_index, region_index, ®ion_id, ®ion_start, ®ion_size); if (result) { - pr_debug("%s:%d ps3_repository_read_stor_dev_region" + pr_devel("%s:%d ps3_repository_read_stor_dev_region" " (%u:%u) failed\n", __func__, __LINE__, repo->bus_index, repo->dev_index); break; } - pr_debug("%s:%d (%u:%u) region_id %u, start %lxh, size %lxh\n", + pr_devel("%s:%d (%u:%u) region_id %u, start %lxh, size %lxh\n", __func__, __LINE__, repo->bus_index, repo->dev_index, - region_id, region_start, region_size); + region_id, (unsigned long)region_start, + (unsigned long)region_size); } out: - pr_debug(" <- %s:%d\n", __func__, __LINE__); + pr_devel(" <- %s:%d\n", __func__, __LINE__); return result; } @@ -1109,7 +1110,7 @@ static int dump_device_info(struct ps3_repository_device *repo, { int result = 0; - pr_debug(" -> %s:%d: bus_%u\n", __func__, __LINE__, repo->bus_index); + pr_devel(" -> %s:%d: bus_%u\n", __func__, __LINE__, repo->bus_index); for (repo->dev_index = 0; repo->dev_index < num_dev; repo->dev_index++) { @@ -1118,7 +1119,7 @@ static int dump_device_info(struct ps3_repository_device *repo, repo->dev_index, &repo->dev_type); if (result) { - pr_debug("%s:%d ps3_repository_read_dev_type" + pr_devel("%s:%d ps3_repository_read_dev_type" " (%u:%u) failed\n", __func__, __LINE__, repo->bus_index, repo->dev_index); break; @@ -1128,15 +1129,15 @@ static int dump_device_info(struct ps3_repository_device *repo, repo->dev_index, &repo->dev_id); if (result) { - pr_debug("%s:%d ps3_repository_read_dev_id" + pr_devel("%s:%d ps3_repository_read_dev_id" " (%u:%u) failed\n", __func__, __LINE__, repo->bus_index, repo->dev_index); continue; } - pr_debug("%s:%d (%u:%u): dev_type %u, dev_id %lu\n", __func__, + pr_devel("%s:%d (%u:%u): dev_type %u, dev_id %lu\n", __func__, __LINE__, repo->bus_index, repo->dev_index, - repo->dev_type, repo->dev_id); + repo->dev_type, (unsigned long)repo->dev_id); ps3_repository_dump_resource_info(repo); @@ -1144,7 +1145,7 @@ static int dump_device_info(struct ps3_repository_device *repo, dump_stor_dev_info(repo); } - pr_debug(" <- %s:%d\n", __func__, __LINE__); + pr_devel(" <- %s:%d\n", __func__, __LINE__); return result; } @@ -1153,7 +1154,7 @@ int ps3_repository_dump_bus_info(void) int result = 0; struct ps3_repository_device repo; - pr_debug(" -> %s:%d\n", __func__, __LINE__); + pr_devel(" -> %s:%d\n", __func__, __LINE__); memset(&repo, 0, sizeof(repo)); @@ -1164,7 +1165,7 @@ int ps3_repository_dump_bus_info(void) &repo.bus_type); if (result) { - pr_debug("%s:%d read_bus_type(%u) failed\n", + pr_devel("%s:%d read_bus_type(%u) failed\n", __func__, __LINE__, repo.bus_index); break; } @@ -1173,32 +1174,32 @@ int ps3_repository_dump_bus_info(void) &repo.bus_id); if (result) { - pr_debug("%s:%d read_bus_id(%u) failed\n", + pr_devel("%s:%d read_bus_id(%u) failed\n", __func__, __LINE__, repo.bus_index); continue; } if (repo.bus_index != repo.bus_id) - pr_debug("%s:%d bus_index != bus_id\n", + pr_devel("%s:%d bus_index != bus_id\n", __func__, __LINE__); result = ps3_repository_read_bus_num_dev(repo.bus_index, &num_dev); if (result) { - pr_debug("%s:%d read_bus_num_dev(%u) failed\n", + pr_devel("%s:%d read_bus_num_dev(%u) failed\n", __func__, __LINE__, repo.bus_index); continue; } - pr_debug("%s:%d bus_%u: bus_type %u, bus_id %lu, num_dev %u\n", + pr_devel("%s:%d bus_%u: bus_type %u, bus_id %lu, num_dev %u\n", __func__, __LINE__, repo.bus_index, repo.bus_type, - repo.bus_id, num_dev); + (unsigned long)repo.bus_id, num_dev); dump_device_info(&repo, num_dev); } - pr_debug(" <- %s:%d\n", __func__, __LINE__); + pr_devel(" <- %s:%d\n", __func__, __LINE__); return result; } diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c index e8ec1b2bfffd..2d664c5a83b0 100644 --- a/arch/powerpc/platforms/ps3/setup.c +++ b/arch/powerpc/platforms/ps3/setup.c @@ -193,10 +193,12 @@ static int ps3_set_dabr(unsigned long dabr) static void __init ps3_setup_arch(void) { + u64 tmp; DBG(" -> %s:%d\n", __func__, __LINE__); - lv1_get_version_info(&ps3_firmware_version.raw); + lv1_get_version_info(&ps3_firmware_version.raw, &tmp); + printk(KERN_INFO "PS3 firmware version %u.%u.%u\n", ps3_firmware_version.major, ps3_firmware_version.minor, ps3_firmware_version.rev); diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c index efc1cd8c034a..4b35166229fe 100644 --- a/arch/powerpc/platforms/ps3/smp.c +++ b/arch/powerpc/platforms/ps3/smp.c @@ -57,7 +57,7 @@ static void ps3_smp_message_pass(int cpu, int msg) " (%d)\n", __func__, __LINE__, cpu, msg, result); } -static int ps3_smp_probe(void) +static int __init ps3_smp_probe(void) { int cpu; diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c index 451fad1c92a8..e17fa1432d80 100644 --- a/arch/powerpc/platforms/ps3/spu.c +++ b/arch/powerpc/platforms/ps3/spu.c @@ -154,7 +154,7 @@ static unsigned long get_vas_id(void) u64 id; lv1_get_logical_ppe_id(&id); - lv1_get_virtual_address_space_id_of_ppe(id, &id); + lv1_get_virtual_address_space_id_of_ppe(&id); return id; } diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index c81f6bb9c10f..ae7b6d41fed3 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -120,3 +120,12 @@ config DTL which are accessible through a debugfs file. Say N if you are unsure. + +config PSERIES_IDLE + tristate "Cpuidle driver for pSeries platforms" + depends on CPU_IDLE + depends on PPC_PSERIES + default y + help + Select this option to enable processor idle state management + through cpuidle subsystem. diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 3556e402cbf5..236db46b4078 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_PHYP_DUMP) += phyp_dump.o obj-$(CONFIG_CMM) += cmm.o obj-$(CONFIG_DTL) += dtl.o obj-$(CONFIG_IO_EVENT_IRQ) += io_event_irq.o +obj-$(CONFIG_PSERIES_IDLE) += processor_idle.o ifeq ($(CONFIG_PPC_PSERIES),y) obj-$(CONFIG_SUSPEND) += suspend.o diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c index 3cafc306b971..c638535753df 100644 --- a/arch/powerpc/platforms/pseries/cmm.c +++ b/arch/powerpc/platforms/pseries/cmm.c @@ -33,7 +33,7 @@ #include <linux/sched.h> #include <linux/stringify.h> #include <linux/swap.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <asm/firmware.h> #include <asm/hvcall.h> #include <asm/mmu.h> @@ -65,7 +65,7 @@ static unsigned int oom_kb = CMM_OOM_KB; static unsigned int cmm_debug = CMM_DEBUG; static unsigned int cmm_disabled = CMM_DISABLE; static unsigned long min_mem_mb = CMM_MIN_MEM_MB; -static struct sys_device cmm_sysdev; +static struct device cmm_dev; MODULE_AUTHOR("Brian King <brking@linux.vnet.ibm.com>"); MODULE_DESCRIPTION("IBM System p Collaborative Memory Manager"); @@ -347,25 +347,25 @@ static int cmm_thread(void *dummy) } #define CMM_SHOW(name, format, args...) \ - static ssize_t show_##name(struct sys_device *dev, \ - struct sysdev_attribute *attr, \ + static ssize_t show_##name(struct device *dev, \ + struct device_attribute *attr, \ char *buf) \ { \ return sprintf(buf, format, ##args); \ } \ - static SYSDEV_ATTR(name, S_IRUGO, show_##name, NULL) + static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL) CMM_SHOW(loaned_kb, "%lu\n", PAGES2KB(loaned_pages)); CMM_SHOW(loaned_target_kb, "%lu\n", PAGES2KB(loaned_pages_target)); -static ssize_t show_oom_pages(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t show_oom_pages(struct device *dev, + struct device_attribute *attr, char *buf) { return sprintf(buf, "%lu\n", PAGES2KB(oom_freed_pages)); } -static ssize_t store_oom_pages(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t store_oom_pages(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { unsigned long val = simple_strtoul (buf, NULL, 10); @@ -379,17 +379,18 @@ static ssize_t store_oom_pages(struct sys_device *dev, return count; } -static SYSDEV_ATTR(oom_freed_kb, S_IWUSR| S_IRUGO, +static DEVICE_ATTR(oom_freed_kb, S_IWUSR | S_IRUGO, show_oom_pages, store_oom_pages); -static struct sysdev_attribute *cmm_attrs[] = { - &attr_loaned_kb, - &attr_loaned_target_kb, - &attr_oom_freed_kb, +static struct device_attribute *cmm_attrs[] = { + &dev_attr_loaned_kb, + &dev_attr_loaned_target_kb, + &dev_attr_oom_freed_kb, }; -static struct sysdev_class cmm_sysdev_class = { +static struct bus_type cmm_subsys = { .name = "cmm", + .dev_name = "cmm", }; /** @@ -398,21 +399,21 @@ static struct sysdev_class cmm_sysdev_class = { * Return value: * 0 on success / other on failure **/ -static int cmm_sysfs_register(struct sys_device *sysdev) +static int cmm_sysfs_register(struct device *dev) { int i, rc; - if ((rc = sysdev_class_register(&cmm_sysdev_class))) + if ((rc = subsys_system_register(&cmm_subsys, NULL))) return rc; - sysdev->id = 0; - sysdev->cls = &cmm_sysdev_class; + dev->id = 0; + dev->bus = &cmm_subsys; - if ((rc = sysdev_register(sysdev))) - goto class_unregister; + if ((rc = device_register(dev))) + goto subsys_unregister; for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++) { - if ((rc = sysdev_create_file(sysdev, cmm_attrs[i]))) + if ((rc = device_create_file(dev, cmm_attrs[i]))) goto fail; } @@ -420,10 +421,10 @@ static int cmm_sysfs_register(struct sys_device *sysdev) fail: while (--i >= 0) - sysdev_remove_file(sysdev, cmm_attrs[i]); - sysdev_unregister(sysdev); -class_unregister: - sysdev_class_unregister(&cmm_sysdev_class); + device_remove_file(dev, cmm_attrs[i]); + device_unregister(dev); +subsys_unregister: + bus_unregister(&cmm_subsys); return rc; } @@ -431,14 +432,14 @@ class_unregister: * cmm_unregister_sysfs - Unregister from sysfs * **/ -static void cmm_unregister_sysfs(struct sys_device *sysdev) +static void cmm_unregister_sysfs(struct device *dev) { int i; for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++) - sysdev_remove_file(sysdev, cmm_attrs[i]); - sysdev_unregister(sysdev); - sysdev_class_unregister(&cmm_sysdev_class); + device_remove_file(dev, cmm_attrs[i]); + device_unregister(dev); + bus_unregister(&cmm_subsys); } /** @@ -657,7 +658,7 @@ static int cmm_init(void) if ((rc = register_reboot_notifier(&cmm_reboot_nb))) goto out_oom_notifier; - if ((rc = cmm_sysfs_register(&cmm_sysdev))) + if ((rc = cmm_sysfs_register(&cmm_dev))) goto out_reboot_notifier; if (register_memory_notifier(&cmm_mem_nb) || @@ -678,7 +679,7 @@ static int cmm_init(void) out_unregister_notifier: unregister_memory_notifier(&cmm_mem_nb); unregister_memory_isolate_notifier(&cmm_mem_isolate_nb); - cmm_unregister_sysfs(&cmm_sysdev); + cmm_unregister_sysfs(&cmm_dev); out_reboot_notifier: unregister_reboot_notifier(&cmm_reboot_nb); out_oom_notifier: @@ -701,7 +702,7 @@ static void cmm_exit(void) unregister_memory_notifier(&cmm_mem_nb); unregister_memory_isolate_notifier(&cmm_mem_isolate_nb); cmm_free_pages(loaned_pages); - cmm_unregister_sysfs(&cmm_sysdev); + cmm_unregister_sysfs(&cmm_dev); } /** diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c index f106662f4381..c9311cfdfcac 100644 --- a/arch/powerpc/platforms/pseries/hvCall_inst.c +++ b/arch/powerpc/platforms/pseries/hvCall_inst.c @@ -109,7 +109,7 @@ static void probe_hcall_entry(void *ignored, unsigned long opcode, unsigned long if (opcode > MAX_HCALL_OPCODE) return; - h = &get_cpu_var(hcall_stats)[opcode / 4]; + h = &__get_cpu_var(hcall_stats)[opcode / 4]; h->tb_start = mftb(); h->purr_start = mfspr(SPRN_PURR); } @@ -126,8 +126,6 @@ static void probe_hcall_exit(void *ignored, unsigned long opcode, unsigned long h->num_calls++; h->tb_total += mftb() - h->tb_start; h->purr_total += mfspr(SPRN_PURR) - h->purr_start; - - put_cpu_var(hcall_stats); } static int __init hcall_inst_init(void) diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index b719d9709730..c442f2b1980f 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -52,13 +52,42 @@ #include "plpar_wrappers.h" +static void tce_invalidate_pSeries_sw(struct iommu_table *tbl, + u64 *startp, u64 *endp) +{ + u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index; + unsigned long start, end, inc; + + start = __pa(startp); + end = __pa(endp); + inc = L1_CACHE_BYTES; /* invalidate a cacheline of TCEs at a time */ + + /* If this is non-zero, change the format. We shift the + * address and or in the magic from the device tree. */ + if (tbl->it_busno) { + start <<= 12; + end <<= 12; + inc <<= 12; + start |= tbl->it_busno; + end |= tbl->it_busno; + } + + end |= inc - 1; /* round up end to be different than start */ + + mb(); /* Make sure TCEs in memory are written */ + while (start <= end) { + out_be64(invalidate, start); + start += inc; + } +} + static int tce_build_pSeries(struct iommu_table *tbl, long index, long npages, unsigned long uaddr, enum dma_data_direction direction, struct dma_attrs *attrs) { u64 proto_tce; - u64 *tcep; + u64 *tcep, *tces; u64 rpn; proto_tce = TCE_PCI_READ; // Read allowed @@ -66,7 +95,7 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index, if (direction != DMA_TO_DEVICE) proto_tce |= TCE_PCI_WRITE; - tcep = ((u64 *)tbl->it_base) + index; + tces = tcep = ((u64 *)tbl->it_base) + index; while (npages--) { /* can't move this out since we might cross MEMBLOCK boundary */ @@ -76,18 +105,24 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index, uaddr += TCE_PAGE_SIZE; tcep++; } + + if (tbl->it_type == TCE_PCI_SWINV_CREATE) + tce_invalidate_pSeries_sw(tbl, tces, tcep - 1); return 0; } static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages) { - u64 *tcep; + u64 *tcep, *tces; - tcep = ((u64 *)tbl->it_base) + index; + tces = tcep = ((u64 *)tbl->it_base) + index; while (npages--) *(tcep++) = 0; + + if (tbl->it_type == TCE_PCI_SWINV_FREE) + tce_invalidate_pSeries_sw(tbl, tces, tcep - 1); } static unsigned long tce_get_pseries(struct iommu_table *tbl, long index) @@ -425,7 +460,7 @@ static void iommu_table_setparms(struct pci_controller *phb, struct iommu_table *tbl) { struct device_node *node; - const unsigned long *basep; + const unsigned long *basep, *sw_inval; const u32 *sizep; node = phb->dn; @@ -462,6 +497,22 @@ static void iommu_table_setparms(struct pci_controller *phb, tbl->it_index = 0; tbl->it_blocksize = 16; tbl->it_type = TCE_PCI; + + sw_inval = of_get_property(node, "linux,tce-sw-invalidate-info", NULL); + if (sw_inval) { + /* + * This property contains information on how to + * invalidate the TCE entry. The first property is + * the base MMIO address used to invalidate entries. + * The second property tells us the format of the TCE + * invalidate (whether it needs to be shifted) and + * some magic routing info to add to our invalidate + * command. + */ + tbl->it_index = (unsigned long) ioremap(sw_inval[0], 8); + tbl->it_busno = sw_inval[1]; /* overload this with magic */ + tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE; + } } /* diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 27a49508b410..948e0e3b3547 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -554,7 +554,10 @@ void __trace_hcall_entry(unsigned long opcode, unsigned long *args) goto out; (*depth)++; + preempt_disable(); trace_hcall_entry(opcode, args); + if (opcode == H_CEDE) + rcu_idle_enter(); (*depth)--; out: @@ -575,7 +578,10 @@ void __trace_hcall_exit(long opcode, unsigned long retval, goto out; (*depth)++; + if (opcode == H_CEDE) + rcu_idle_exit(); trace_hcall_exit(opcode, retval, retbuf); + preempt_enable(); (*depth)--; out: diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c index a76b22844d18..330a57b7c17c 100644 --- a/arch/powerpc/platforms/pseries/nvram.c +++ b/arch/powerpc/platforms/pseries/nvram.c @@ -625,6 +625,8 @@ static void oops_to_nvram(struct kmsg_dumper *dumper, { static unsigned int oops_count = 0; static bool panicking = false; + static DEFINE_SPINLOCK(lock); + unsigned long flags; size_t text_len; unsigned int err_type = ERR_TYPE_KERNEL_PANIC_GZ; int rc = -1; @@ -655,6 +657,9 @@ static void oops_to_nvram(struct kmsg_dumper *dumper, if (clobbering_unread_rtas_event()) return; + if (!spin_trylock_irqsave(&lock, flags)) + return; + if (big_oops_buf) { text_len = capture_last_msgs(old_msgs, old_len, new_msgs, new_len, big_oops_buf, big_oops_buf_sz); @@ -670,4 +675,6 @@ static void oops_to_nvram(struct kmsg_dumper *dumper, (void) nvram_write_os_partition(&oops_log_partition, oops_buf, (int) (sizeof(*oops_len) + *oops_len), err_type, ++oops_count); + + spin_unlock_irqrestore(&lock, flags); } diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c new file mode 100644 index 000000000000..085fd3f45ad2 --- /dev/null +++ b/arch/powerpc/platforms/pseries/processor_idle.c @@ -0,0 +1,329 @@ +/* + * processor_idle - idle state cpuidle driver. + * Adapted from drivers/idle/intel_idle.c and + * drivers/acpi/processor_idle.c + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/moduleparam.h> +#include <linux/cpuidle.h> +#include <linux/cpu.h> + +#include <asm/paca.h> +#include <asm/reg.h> +#include <asm/system.h> +#include <asm/machdep.h> +#include <asm/firmware.h> + +#include "plpar_wrappers.h" +#include "pseries.h" + +struct cpuidle_driver pseries_idle_driver = { + .name = "pseries_idle", + .owner = THIS_MODULE, +}; + +#define MAX_IDLE_STATE_COUNT 2 + +static int max_idle_state = MAX_IDLE_STATE_COUNT - 1; +static struct cpuidle_device __percpu *pseries_cpuidle_devices; +static struct cpuidle_state *cpuidle_state_table; + +void update_smt_snooze_delay(int snooze) +{ + struct cpuidle_driver *drv = cpuidle_get_driver(); + if (drv) + drv->states[0].target_residency = snooze; +} + +static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before) +{ + + *kt_before = ktime_get_real(); + *in_purr = mfspr(SPRN_PURR); + /* + * Indicate to the HV that we are idle. Now would be + * a good time to find other work to dispatch. + */ + get_lppaca()->idle = 1; +} + +static inline s64 idle_loop_epilog(unsigned long in_purr, ktime_t kt_before) +{ + get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr; + get_lppaca()->idle = 0; + + return ktime_to_us(ktime_sub(ktime_get_real(), kt_before)); +} + +static int snooze_loop(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + unsigned long in_purr; + ktime_t kt_before; + unsigned long start_snooze; + long snooze = drv->states[0].target_residency; + + idle_loop_prolog(&in_purr, &kt_before); + + if (snooze) { + start_snooze = get_tb() + snooze * tb_ticks_per_usec; + local_irq_enable(); + set_thread_flag(TIF_POLLING_NRFLAG); + + while ((snooze < 0) || (get_tb() < start_snooze)) { + if (need_resched() || cpu_is_offline(dev->cpu)) + goto out; + ppc64_runlatch_off(); + HMT_low(); + HMT_very_low(); + } + + HMT_medium(); + clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb(); + local_irq_disable(); + } + +out: + HMT_medium(); + dev->last_residency = + (int)idle_loop_epilog(in_purr, kt_before); + return index; +} + +static int dedicated_cede_loop(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + unsigned long in_purr; + ktime_t kt_before; + + idle_loop_prolog(&in_purr, &kt_before); + get_lppaca()->donate_dedicated_cpu = 1; + + ppc64_runlatch_off(); + HMT_medium(); + cede_processor(); + + get_lppaca()->donate_dedicated_cpu = 0; + dev->last_residency = + (int)idle_loop_epilog(in_purr, kt_before); + return index; +} + +static int shared_cede_loop(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + unsigned long in_purr; + ktime_t kt_before; + + idle_loop_prolog(&in_purr, &kt_before); + + /* + * Yield the processor to the hypervisor. We return if + * an external interrupt occurs (which are driven prior + * to returning here) or if a prod occurs from another + * processor. When returning here, external interrupts + * are enabled. + */ + cede_processor(); + + dev->last_residency = + (int)idle_loop_epilog(in_purr, kt_before); + return index; +} + +/* + * States for dedicated partition case. + */ +static struct cpuidle_state dedicated_states[MAX_IDLE_STATE_COUNT] = { + { /* Snooze */ + .name = "snooze", + .desc = "snooze", + .flags = CPUIDLE_FLAG_TIME_VALID, + .exit_latency = 0, + .target_residency = 0, + .enter = &snooze_loop }, + { /* CEDE */ + .name = "CEDE", + .desc = "CEDE", + .flags = CPUIDLE_FLAG_TIME_VALID, + .exit_latency = 1, + .target_residency = 10, + .enter = &dedicated_cede_loop }, +}; + +/* + * States for shared partition case. + */ +static struct cpuidle_state shared_states[MAX_IDLE_STATE_COUNT] = { + { /* Shared Cede */ + .name = "Shared Cede", + .desc = "Shared Cede", + .flags = CPUIDLE_FLAG_TIME_VALID, + .exit_latency = 0, + .target_residency = 0, + .enter = &shared_cede_loop }, +}; + +int pseries_notify_cpuidle_add_cpu(int cpu) +{ + struct cpuidle_device *dev = + per_cpu_ptr(pseries_cpuidle_devices, cpu); + if (dev && cpuidle_get_driver()) { + cpuidle_disable_device(dev); + cpuidle_enable_device(dev); + } + return 0; +} + +/* + * pseries_cpuidle_driver_init() + */ +static int pseries_cpuidle_driver_init(void) +{ + int idle_state; + struct cpuidle_driver *drv = &pseries_idle_driver; + + drv->state_count = 0; + + for (idle_state = 0; idle_state < MAX_IDLE_STATE_COUNT; ++idle_state) { + + if (idle_state > max_idle_state) + break; + + /* is the state not enabled? */ + if (cpuidle_state_table[idle_state].enter == NULL) + continue; + + drv->states[drv->state_count] = /* structure copy */ + cpuidle_state_table[idle_state]; + + if (cpuidle_state_table == dedicated_states) + drv->states[drv->state_count].target_residency = + __get_cpu_var(smt_snooze_delay); + + drv->state_count += 1; + } + + return 0; +} + +/* pseries_idle_devices_uninit(void) + * unregister cpuidle devices and de-allocate memory + */ +static void pseries_idle_devices_uninit(void) +{ + int i; + struct cpuidle_device *dev; + + for_each_possible_cpu(i) { + dev = per_cpu_ptr(pseries_cpuidle_devices, i); + cpuidle_unregister_device(dev); + } + + free_percpu(pseries_cpuidle_devices); + return; +} + +/* pseries_idle_devices_init() + * allocate, initialize and register cpuidle device + */ +static int pseries_idle_devices_init(void) +{ + int i; + struct cpuidle_driver *drv = &pseries_idle_driver; + struct cpuidle_device *dev; + + pseries_cpuidle_devices = alloc_percpu(struct cpuidle_device); + if (pseries_cpuidle_devices == NULL) + return -ENOMEM; + + for_each_possible_cpu(i) { + dev = per_cpu_ptr(pseries_cpuidle_devices, i); + dev->state_count = drv->state_count; + dev->cpu = i; + if (cpuidle_register_device(dev)) { + printk(KERN_DEBUG \ + "cpuidle_register_device %d failed!\n", i); + return -EIO; + } + } + + return 0; +} + +/* + * pseries_idle_probe() + * Choose state table for shared versus dedicated partition + */ +static int pseries_idle_probe(void) +{ + + if (!firmware_has_feature(FW_FEATURE_SPLPAR)) + return -ENODEV; + + if (cpuidle_disable != IDLE_NO_OVERRIDE) + return -ENODEV; + + if (max_idle_state == 0) { + printk(KERN_DEBUG "pseries processor idle disabled.\n"); + return -EPERM; + } + + if (get_lppaca()->shared_proc) + cpuidle_state_table = shared_states; + else + cpuidle_state_table = dedicated_states; + + return 0; +} + +static int __init pseries_processor_idle_init(void) +{ + int retval; + + retval = pseries_idle_probe(); + if (retval) + return retval; + + pseries_cpuidle_driver_init(); + retval = cpuidle_register_driver(&pseries_idle_driver); + if (retval) { + printk(KERN_DEBUG "Registration of pseries driver failed.\n"); + return retval; + } + + retval = pseries_idle_devices_init(); + if (retval) { + pseries_idle_devices_uninit(); + cpuidle_unregister_driver(&pseries_idle_driver); + return retval; + } + + printk(KERN_DEBUG "pseries_idle_driver registered\n"); + + return 0; +} + +static void __exit pseries_processor_idle_exit(void) +{ + + pseries_idle_devices_uninit(); + cpuidle_unregister_driver(&pseries_idle_driver); + + return; +} + +module_init(pseries_processor_idle_init); +module_exit(pseries_processor_idle_exit); + +MODULE_AUTHOR("Deepthi Dharwar <deepthi@linux.vnet.ibm.com>"); +MODULE_DESCRIPTION("Cpuidle driver for POWER"); +MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index 24c7162f11d9..9a3dda07566f 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -57,4 +57,7 @@ extern struct device_node *dlpar_configure_connector(u32); extern int dlpar_attach_node(struct device_node *); extern int dlpar_detach_node(struct device_node *); +/* Snooze Delay, pseries_idle */ +DECLARE_PER_CPU(long, smt_snooze_delay); + #endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/pseries_energy.c b/arch/powerpc/platforms/pseries/pseries_energy.c index c8b3c69fe891..af281dce510a 100644 --- a/arch/powerpc/platforms/pseries/pseries_energy.c +++ b/arch/powerpc/platforms/pseries/pseries_energy.c @@ -15,7 +15,7 @@ #include <linux/errno.h> #include <linux/init.h> #include <linux/seq_file.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/cpu.h> #include <linux/of.h> #include <asm/cputhreads.h> @@ -184,7 +184,7 @@ static ssize_t get_best_energy_list(char *page, int activate) return s-page; } -static ssize_t get_best_energy_data(struct sys_device *dev, +static ssize_t get_best_energy_data(struct device *dev, char *page, int activate) { int rc; @@ -207,26 +207,26 @@ static ssize_t get_best_energy_data(struct sys_device *dev, /* Wrapper functions */ -static ssize_t cpu_activate_hint_list_show(struct sysdev_class *class, - struct sysdev_class_attribute *attr, char *page) +static ssize_t cpu_activate_hint_list_show(struct device *dev, + struct device_attribute *attr, char *page) { return get_best_energy_list(page, 1); } -static ssize_t cpu_deactivate_hint_list_show(struct sysdev_class *class, - struct sysdev_class_attribute *attr, char *page) +static ssize_t cpu_deactivate_hint_list_show(struct device *dev, + struct device_attribute *attr, char *page) { return get_best_energy_list(page, 0); } -static ssize_t percpu_activate_hint_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *page) +static ssize_t percpu_activate_hint_show(struct device *dev, + struct device_attribute *attr, char *page) { return get_best_energy_data(dev, page, 1); } -static ssize_t percpu_deactivate_hint_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *page) +static ssize_t percpu_deactivate_hint_show(struct device *dev, + struct device_attribute *attr, char *page) { return get_best_energy_data(dev, page, 0); } @@ -241,48 +241,48 @@ static ssize_t percpu_deactivate_hint_show(struct sys_device *dev, * Per-cpu value of the hint */ -struct sysdev_class_attribute attr_cpu_activate_hint_list = - _SYSDEV_CLASS_ATTR(pseries_activate_hint_list, 0444, +struct device_attribute attr_cpu_activate_hint_list = + __ATTR(pseries_activate_hint_list, 0444, cpu_activate_hint_list_show, NULL); -struct sysdev_class_attribute attr_cpu_deactivate_hint_list = - _SYSDEV_CLASS_ATTR(pseries_deactivate_hint_list, 0444, +struct device_attribute attr_cpu_deactivate_hint_list = + __ATTR(pseries_deactivate_hint_list, 0444, cpu_deactivate_hint_list_show, NULL); -struct sysdev_attribute attr_percpu_activate_hint = - _SYSDEV_ATTR(pseries_activate_hint, 0444, +struct device_attribute attr_percpu_activate_hint = + __ATTR(pseries_activate_hint, 0444, percpu_activate_hint_show, NULL); -struct sysdev_attribute attr_percpu_deactivate_hint = - _SYSDEV_ATTR(pseries_deactivate_hint, 0444, +struct device_attribute attr_percpu_deactivate_hint = + __ATTR(pseries_deactivate_hint, 0444, percpu_deactivate_hint_show, NULL); static int __init pseries_energy_init(void) { int cpu, err; - struct sys_device *cpu_sys_dev; + struct device *cpu_dev; if (!check_for_h_best_energy()) { printk(KERN_INFO "Hypercall H_BEST_ENERGY not supported\n"); return 0; } /* Create the sysfs files */ - err = sysfs_create_file(&cpu_sysdev_class.kset.kobj, - &attr_cpu_activate_hint_list.attr); + err = device_create_file(cpu_subsys.dev_root, + &attr_cpu_activate_hint_list); if (!err) - err = sysfs_create_file(&cpu_sysdev_class.kset.kobj, - &attr_cpu_deactivate_hint_list.attr); + err = device_create_file(cpu_subsys.dev_root, + &attr_cpu_deactivate_hint_list); if (err) return err; for_each_possible_cpu(cpu) { - cpu_sys_dev = get_cpu_sysdev(cpu); - err = sysfs_create_file(&cpu_sys_dev->kobj, - &attr_percpu_activate_hint.attr); + cpu_dev = get_cpu_device(cpu); + err = device_create_file(cpu_dev, + &attr_percpu_activate_hint); if (err) break; - err = sysfs_create_file(&cpu_sys_dev->kobj, - &attr_percpu_deactivate_hint.attr); + err = device_create_file(cpu_dev, + &attr_percpu_deactivate_hint); if (err) break; } @@ -298,23 +298,20 @@ static int __init pseries_energy_init(void) static void __exit pseries_energy_cleanup(void) { int cpu; - struct sys_device *cpu_sys_dev; + struct device *cpu_dev; if (!sysfs_entries) return; /* Remove the sysfs files */ - sysfs_remove_file(&cpu_sysdev_class.kset.kobj, - &attr_cpu_activate_hint_list.attr); - - sysfs_remove_file(&cpu_sysdev_class.kset.kobj, - &attr_cpu_deactivate_hint_list.attr); + device_remove_file(cpu_subsys.dev_root, &attr_cpu_activate_hint_list); + device_remove_file(cpu_subsys.dev_root, &attr_cpu_deactivate_hint_list); for_each_possible_cpu(cpu) { - cpu_sys_dev = get_cpu_sysdev(cpu); - sysfs_remove_file(&cpu_sys_dev->kobj, + cpu_dev = get_cpu_device(cpu); + sysfs_remove_file(&cpu_dev->kobj, &attr_percpu_activate_hint.attr); - sysfs_remove_file(&cpu_sys_dev->kobj, + sysfs_remove_file(&cpu_dev->kobj, &attr_percpu_deactivate_hint.attr); } } diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index c3408ca8855e..f79f1278dfca 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -39,6 +39,7 @@ #include <linux/irq.h> #include <linux/seq_file.h> #include <linux/root_dev.h> +#include <linux/cpuidle.h> #include <asm/mmu.h> #include <asm/processor.h> @@ -74,9 +75,6 @@ EXPORT_SYMBOL(CMO_PageSize); int fwnmi_active; /* TRUE if an FWNMI handler is present */ -static void pseries_shared_idle_sleep(void); -static void pseries_dedicated_idle_sleep(void); - static struct device_node *pSeries_mpic_node; static void pSeries_show_cpuinfo(struct seq_file *m) @@ -192,8 +190,7 @@ static void __init pseries_mpic_init_IRQ(void) BUG_ON(openpic_addr == 0); /* Setup the openpic driver */ - mpic = mpic_alloc(pSeries_mpic_node, openpic_addr, - MPIC_PRIMARY, + mpic = mpic_alloc(pSeries_mpic_node, openpic_addr, 0, 16, 250, /* isu size, irq count */ " MPIC "); BUG_ON(mpic == NULL); @@ -352,8 +349,25 @@ static int alloc_dispatch_log_kmem_cache(void) } early_initcall(alloc_dispatch_log_kmem_cache); +static void pSeries_idle(void) +{ + /* This would call on the cpuidle framework, and the back-end pseries + * driver to go to idle states + */ + if (cpuidle_idle_call()) { + /* On error, execute default handler + * to go into low thread priority and possibly + * low power mode. + */ + HMT_low(); + HMT_very_low(); + } +} + static void __init pSeries_setup_arch(void) { + panic_timeout = 10; + /* Discover PIC type and setup ppc_md accordingly */ pseries_discover_pic(); @@ -374,18 +388,9 @@ static void __init pSeries_setup_arch(void) pSeries_nvram_init(); - /* Choose an idle loop */ if (firmware_has_feature(FW_FEATURE_SPLPAR)) { vpa_init(boot_cpuid); - if (get_lppaca()->shared_proc) { - printk(KERN_DEBUG "Using shared processor idle loop\n"); - ppc_md.power_save = pseries_shared_idle_sleep; - } else { - printk(KERN_DEBUG "Using dedicated idle loop\n"); - ppc_md.power_save = pseries_dedicated_idle_sleep; - } - } else { - printk(KERN_DEBUG "Using default idle loop\n"); + ppc_md.power_save = pSeries_idle; } if (firmware_has_feature(FW_FEATURE_LPAR)) @@ -586,80 +591,6 @@ static int __init pSeries_probe(void) return 1; } - -DECLARE_PER_CPU(long, smt_snooze_delay); - -static void pseries_dedicated_idle_sleep(void) -{ - unsigned int cpu = smp_processor_id(); - unsigned long start_snooze; - unsigned long in_purr, out_purr; - long snooze = __get_cpu_var(smt_snooze_delay); - - /* - * Indicate to the HV that we are idle. Now would be - * a good time to find other work to dispatch. - */ - get_lppaca()->idle = 1; - get_lppaca()->donate_dedicated_cpu = 1; - in_purr = mfspr(SPRN_PURR); - - /* - * We come in with interrupts disabled, and need_resched() - * has been checked recently. If we should poll for a little - * while, do so. - */ - if (snooze) { - start_snooze = get_tb() + snooze * tb_ticks_per_usec; - local_irq_enable(); - set_thread_flag(TIF_POLLING_NRFLAG); - - while ((snooze < 0) || (get_tb() < start_snooze)) { - if (need_resched() || cpu_is_offline(cpu)) - goto out; - ppc64_runlatch_off(); - HMT_low(); - HMT_very_low(); - } - - HMT_medium(); - clear_thread_flag(TIF_POLLING_NRFLAG); - smp_mb(); - local_irq_disable(); - if (need_resched() || cpu_is_offline(cpu)) - goto out; - } - - cede_processor(); - -out: - HMT_medium(); - out_purr = mfspr(SPRN_PURR); - get_lppaca()->wait_state_cycles += out_purr - in_purr; - get_lppaca()->donate_dedicated_cpu = 0; - get_lppaca()->idle = 0; -} - -static void pseries_shared_idle_sleep(void) -{ - /* - * Indicate to the HV that we are idle. Now would be - * a good time to find other work to dispatch. - */ - get_lppaca()->idle = 1; - - /* - * Yield the processor to the hypervisor. We return if - * an external interrupt occurs (which are driven prior - * to returning here) or if a prod occurs from another - * processor. When returning here, external interrupts - * are enabled. - */ - cede_processor(); - - get_lppaca()->idle = 0; -} - static int pSeries_pci_probe_mode(struct pci_bus *bus) { if (firmware_has_feature(FW_FEATURE_LPAR)) diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 26e93fd4c62b..eadba9521a35 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -22,7 +22,7 @@ #include <linux/spinlock.h> #include <linux/cache.h> #include <linux/err.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/cpu.h> #include <asm/ptrace.h> @@ -148,6 +148,7 @@ static void __devinit smp_xics_setup_cpu(int cpu) set_cpu_current_state(cpu, CPU_STATE_ONLINE); set_default_offline_state(cpu); #endif + pseries_notify_cpuidle_add_cpu(cpu); } static int __devinit smp_pSeries_kick_cpu(int nr) diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c index d3de0849f296..b84a8b2238dd 100644 --- a/arch/powerpc/platforms/pseries/suspend.c +++ b/arch/powerpc/platforms/pseries/suspend.c @@ -26,7 +26,7 @@ #include <asm/rtas.h> static u64 stream_id; -static struct sys_device suspend_sysdev; +static struct device suspend_dev; static DECLARE_COMPLETION(suspend_work); static struct rtas_suspend_me_data suspend_data; static atomic_t suspending; @@ -110,8 +110,8 @@ static int pseries_prepare_late(void) /** * store_hibernate - Initiate partition hibernation - * @classdev: sysdev class struct - * @attr: class device attribute struct + * @dev: subsys root device + * @attr: device attribute struct * @buf: buffer * @count: buffer size * @@ -121,8 +121,8 @@ static int pseries_prepare_late(void) * Return value: * number of bytes printed to buffer / other on failure **/ -static ssize_t store_hibernate(struct sysdev_class *classdev, - struct sysdev_class_attribute *attr, +static ssize_t store_hibernate(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { int rc; @@ -148,10 +148,11 @@ static ssize_t store_hibernate(struct sysdev_class *classdev, return rc; } -static SYSDEV_CLASS_ATTR(hibernate, S_IWUSR, NULL, store_hibernate); +static DEVICE_ATTR(hibernate, S_IWUSR, NULL, store_hibernate); -static struct sysdev_class suspend_sysdev_class = { +static struct bus_type suspend_subsys = { .name = "power", + .dev_name = "power", }; static const struct platform_suspend_ops pseries_suspend_ops = { @@ -167,23 +168,23 @@ static const struct platform_suspend_ops pseries_suspend_ops = { * Return value: * 0 on success / other on failure **/ -static int pseries_suspend_sysfs_register(struct sys_device *sysdev) +static int pseries_suspend_sysfs_register(struct device *dev) { int rc; - if ((rc = sysdev_class_register(&suspend_sysdev_class))) + if ((rc = subsys_system_register(&suspend_subsys, NULL))) return rc; - sysdev->id = 0; - sysdev->cls = &suspend_sysdev_class; + dev->id = 0; + dev->bus = &suspend_subsys; - if ((rc = sysdev_class_create_file(&suspend_sysdev_class, &attr_hibernate))) - goto class_unregister; + if ((rc = device_create_file(suspend_subsys.dev_root, &dev_attr_hibernate))) + goto subsys_unregister; return 0; -class_unregister: - sysdev_class_unregister(&suspend_sysdev_class); +subsys_unregister: + bus_unregister(&suspend_subsys); return rc; } @@ -204,7 +205,7 @@ static int __init pseries_suspend_init(void) if (suspend_data.token == RTAS_UNKNOWN_SERVICE) return 0; - if ((rc = pseries_suspend_sysfs_register(&suspend_sysdev))) + if ((rc = pseries_suspend_sysfs_register(&suspend_dev))) return rc; ppc_md.suspend_disable_cpu = pseries_suspend_cpu; diff --git a/arch/powerpc/platforms/wsp/Kconfig b/arch/powerpc/platforms/wsp/Kconfig index bd560c786ed6..57d22a2f4ba9 100644 --- a/arch/powerpc/platforms/wsp/Kconfig +++ b/arch/powerpc/platforms/wsp/Kconfig @@ -1,20 +1,28 @@ config PPC_WSP bool select PPC_A2 + select GENERIC_TBSYNC + select PPC_ICSWX select PPC_SCOM select PPC_XICS select PPC_ICP_NATIVE select PCI select PPC_IO_WORKAROUNDS if PCI select PPC_INDIRECT_PIO if PCI + select PPC_WSP_COPRO default n menu "WSP platform selection" depends on PPC_BOOK3E_64 config PPC_PSR2 - bool "PSR-2 platform" - select GENERIC_TBSYNC + bool "PowerEN System Reference Platform 2" + select EPAPR_BOOT + select PPC_WSP + default y + +config PPC_CHROMA + bool "PowerEN PCIe Chroma Card" select EPAPR_BOOT select PPC_WSP default y diff --git a/arch/powerpc/platforms/wsp/Makefile b/arch/powerpc/platforms/wsp/Makefile index a1486b436f02..56817ac98fc9 100644 --- a/arch/powerpc/platforms/wsp/Makefile +++ b/arch/powerpc/platforms/wsp/Makefile @@ -1,8 +1,10 @@ ccflags-y += -mno-minimal-toc -obj-y += setup.o ics.o -obj-$(CONFIG_PPC_PSR2) += psr2.o opb_pic.o +obj-y += setup.o ics.o wsp.o +obj-$(CONFIG_PPC_PSR2) += psr2.o +obj-$(CONFIG_PPC_CHROMA) += chroma.o h8.o +obj-$(CONFIG_PPC_WSP) += opb_pic.o obj-$(CONFIG_PPC_WSP) += scom_wsp.o obj-$(CONFIG_SMP) += smp.o scom_smp.o obj-$(CONFIG_PCI) += wsp_pci.o -obj-$(CONFIG_PCI_MSI) += msi.o \ No newline at end of file +obj-$(CONFIG_PCI_MSI) += msi.o diff --git a/arch/powerpc/platforms/wsp/chroma.c b/arch/powerpc/platforms/wsp/chroma.c new file mode 100644 index 000000000000..ca6fa26f6e63 --- /dev/null +++ b/arch/powerpc/platforms/wsp/chroma.c @@ -0,0 +1,56 @@ +/* + * Copyright 2008-2011, IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/of.h> +#include <linux/smp.h> +#include <linux/time.h> + +#include <asm/machdep.h> +#include <asm/system.h> +#include <asm/udbg.h> + +#include "ics.h" +#include "wsp.h" + +void __init chroma_setup_arch(void) +{ + wsp_setup_arch(); + wsp_setup_h8(); + +} + +static int __init chroma_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "ibm,wsp-chroma")) + return 0; + + return 1; +} + +define_machine(chroma_md) { + .name = "Chroma PCIe", + .probe = chroma_probe, + .setup_arch = chroma_setup_arch, + .restart = wsp_h8_restart, + .power_off = wsp_h8_power_off, + .halt = wsp_halt, + .calibrate_decr = generic_calibrate_decr, + .init_IRQ = wsp_setup_irq, + .progress = udbg_progress, + .power_save = book3e_idle, +}; + +machine_arch_initcall(chroma_md, wsp_probe_devices); diff --git a/arch/powerpc/platforms/wsp/h8.c b/arch/powerpc/platforms/wsp/h8.c new file mode 100644 index 000000000000..d18e6cc19df3 --- /dev/null +++ b/arch/powerpc/platforms/wsp/h8.c @@ -0,0 +1,134 @@ +/* + * Copyright 2008-2011, IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/io.h> + +#include "wsp.h" + +/* + * The UART connection to the H8 is over ttyS1 which is just a 16550. + * We assume that FW has it setup right and no one messes with it. + */ + + +static u8 __iomem *h8; + +#define RBR 0 /* Receiver Buffer Register */ +#define THR 0 /* Transmitter Holding Register */ +#define LSR 5 /* Line Status Register */ +#define LSR_DR 0x01 /* LSR value for Data-Ready */ +#define LSR_THRE 0x20 /* LSR value for Transmitter-Holding-Register-Empty */ +static void wsp_h8_putc(int c) +{ + u8 lsr; + + do { + lsr = readb(h8 + LSR); + } while ((lsr & LSR_THRE) != LSR_THRE); + writeb(c, h8 + THR); +} + +static int wsp_h8_getc(void) +{ + u8 lsr; + + do { + lsr = readb(h8 + LSR); + } while ((lsr & LSR_DR) != LSR_DR); + + return readb(h8 + RBR); +} + +static void wsp_h8_puts(const char *s, int sz) +{ + int i; + + for (i = 0; i < sz; i++) { + wsp_h8_putc(s[i]); + + /* no flow control so wait for echo */ + wsp_h8_getc(); + } + wsp_h8_putc('\r'); + wsp_h8_putc('\n'); +} + +static void wsp_h8_terminal_cmd(const char *cmd, int sz) +{ + hard_irq_disable(); + wsp_h8_puts(cmd, sz); + /* should never return, but just in case */ + for (;;) + continue; +} + + +void wsp_h8_restart(char *cmd) +{ + static const char restart[] = "warm-reset"; + + (void)cmd; + wsp_h8_terminal_cmd(restart, sizeof(restart) - 1); +} + +void wsp_h8_power_off(void) +{ + static const char off[] = "power-off"; + + wsp_h8_terminal_cmd(off, sizeof(off) - 1); +} + +static void __iomem *wsp_h8_getaddr(void) +{ + struct device_node *aliases; + struct device_node *uart; + struct property *path; + void __iomem *va = NULL; + + /* + * there is nothing in the devtree to tell us which is mapped + * to the H8, but se know it is the second serial port. + */ + + aliases = of_find_node_by_path("/aliases"); + if (aliases == NULL) + return NULL; + + path = of_find_property(aliases, "serial1", NULL); + if (path == NULL) + goto out; + + uart = of_find_node_by_path(path->value); + if (uart == NULL) + goto out; + + va = of_iomap(uart, 0); + + /* remove it so no one messes with it */ + of_detach_node(uart); + of_node_put(uart); + +out: + of_node_put(aliases); + + return va; +} + +void __init wsp_setup_h8(void) +{ + h8 = wsp_h8_getaddr(); + + /* Devtree change? lets hard map it anyway */ + if (h8 == NULL) { + pr_warn("UART to H8 could not be found"); + h8 = ioremap(0xffc0008000ULL, 0x100); + } +} diff --git a/arch/powerpc/platforms/wsp/opb_pic.c b/arch/powerpc/platforms/wsp/opb_pic.c index be05631a3c1c..19f353dfcd03 100644 --- a/arch/powerpc/platforms/wsp/opb_pic.c +++ b/arch/powerpc/platforms/wsp/opb_pic.c @@ -320,7 +320,8 @@ void __init opb_pic_init(void) } /* Attach opb interrupt handler to new virtual IRQ */ - rc = request_irq(virq, opb_irq_handler, 0, "OPB LS Cascade", opb); + rc = request_irq(virq, opb_irq_handler, IRQF_NO_THREAD, + "OPB LS Cascade", opb); if (rc) { printk("opb: request_irq failed: %d\n", rc); continue; diff --git a/arch/powerpc/platforms/wsp/psr2.c b/arch/powerpc/platforms/wsp/psr2.c index 166f2e4b4bee..0c1ae06d0be1 100644 --- a/arch/powerpc/platforms/wsp/psr2.c +++ b/arch/powerpc/platforms/wsp/psr2.c @@ -14,10 +14,10 @@ #include <linux/mm.h> #include <linux/of.h> #include <linux/smp.h> +#include <linux/time.h> #include <asm/machdep.h> #include <asm/system.h> -#include <asm/time.h> #include <asm/udbg.h> #include "ics.h" @@ -27,7 +27,8 @@ static void psr2_spin(void) { hard_irq_disable(); - for (;;) ; + for (;;) + continue; } static void psr2_restart(char *cmd) @@ -35,65 +36,32 @@ static void psr2_restart(char *cmd) psr2_spin(); } -static int psr2_probe_devices(void) -{ - struct device_node *np; - - /* Our RTC is a ds1500. It seems to be programatically compatible - * with the ds1511 for which we have a driver so let's use that - */ - np = of_find_compatible_node(NULL, NULL, "dallas,ds1500"); - if (np != NULL) { - struct resource res; - if (of_address_to_resource(np, 0, &res) == 0) - platform_device_register_simple("ds1511", 0, &res, 1); - } - return 0; -} -machine_arch_initcall(psr2_md, psr2_probe_devices); - -static void __init psr2_setup_arch(void) -{ - /* init to some ~sane value until calibrate_delay() runs */ - loops_per_jiffy = 50000000; - - scom_init_wsp(); - - /* Setup SMP callback */ -#ifdef CONFIG_SMP - a2_setup_smp(); -#endif -#ifdef CONFIG_PCI - wsp_setup_pci(); -#endif - -} - static int __init psr2_probe(void) { unsigned long root = of_get_flat_dt_root(); + if (of_flat_dt_is_compatible(root, "ibm,wsp-chroma")) { + /* chroma systems also claim they are psr2s */ + return 0; + } + if (!of_flat_dt_is_compatible(root, "ibm,psr2")) return 0; return 1; } -static void __init psr2_init_irq(void) -{ - wsp_init_irq(); - opb_pic_init(); -} - define_machine(psr2_md) { .name = "PSR2 A2", .probe = psr2_probe, - .setup_arch = psr2_setup_arch, + .setup_arch = wsp_setup_arch, .restart = psr2_restart, .power_off = psr2_spin, .halt = psr2_spin, .calibrate_decr = generic_calibrate_decr, - .init_IRQ = psr2_init_irq, + .init_IRQ = wsp_setup_irq, .progress = udbg_progress, .power_save = book3e_idle, }; + +machine_arch_initcall(psr2_md, wsp_probe_devices); diff --git a/arch/powerpc/platforms/wsp/wsp.c b/arch/powerpc/platforms/wsp/wsp.c new file mode 100644 index 000000000000..d25cc96c21b8 --- /dev/null +++ b/arch/powerpc/platforms/wsp/wsp.c @@ -0,0 +1,115 @@ +/* + * Copyright 2008-2011, IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/smp.h> +#include <linux/delay.h> +#include <linux/time.h> + +#include <asm/scom.h> + +#include "wsp.h" +#include "ics.h" + +#define WSP_SOC_COMPATIBLE "ibm,wsp-soc" +#define PBIC_COMPATIBLE "ibm,wsp-pbic" +#define COPRO_COMPATIBLE "ibm,wsp-coprocessor" + +static int __init wsp_probe_buses(void) +{ + static __initdata struct of_device_id bus_ids[] = { + /* + * every node in between needs to be here or you won't + * find it + */ + { .compatible = WSP_SOC_COMPATIBLE, }, + { .compatible = PBIC_COMPATIBLE, }, + { .compatible = COPRO_COMPATIBLE, }, + {}, + }; + of_platform_bus_probe(NULL, bus_ids, NULL); + + return 0; +} + +void __init wsp_setup_arch(void) +{ + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000; + + scom_init_wsp(); + + /* Setup SMP callback */ +#ifdef CONFIG_SMP + a2_setup_smp(); +#endif +#ifdef CONFIG_PCI + wsp_setup_pci(); +#endif +} + +void __init wsp_setup_irq(void) +{ + wsp_init_irq(); + opb_pic_init(); +} + + +int __init wsp_probe_devices(void) +{ + struct device_node *np; + + /* Our RTC is a ds1500. It seems to be programatically compatible + * with the ds1511 for which we have a driver so let's use that + */ + np = of_find_compatible_node(NULL, NULL, "dallas,ds1500"); + if (np != NULL) { + struct resource res; + if (of_address_to_resource(np, 0, &res) == 0) + platform_device_register_simple("ds1511", 0, &res, 1); + } + + wsp_probe_buses(); + + return 0; +} + +void wsp_halt(void) +{ + u64 val; + scom_map_t m; + struct device_node *dn; + struct device_node *mine; + struct device_node *me; + + me = of_get_cpu_node(smp_processor_id(), NULL); + mine = scom_find_parent(me); + + /* This will halt all the A2s but not power off the chip */ + for_each_node_with_property(dn, "scom-controller") { + if (dn == mine) + continue; + m = scom_map(dn, 0, 1); + + /* read-modify-write it so the HW probe does not get + * confused */ + val = scom_read(m, 0); + val |= 1; + scom_write(m, 0, val); + scom_unmap(m); + } + m = scom_map(mine, 0, 1); + val = scom_read(m, 0); + val |= 1; + scom_write(m, 0, val); + /* should never return */ + scom_unmap(m); +} diff --git a/arch/powerpc/platforms/wsp/wsp.h b/arch/powerpc/platforms/wsp/wsp.h index 33479818f62a..10c1d1fff362 100644 --- a/arch/powerpc/platforms/wsp/wsp.h +++ b/arch/powerpc/platforms/wsp/wsp.h @@ -6,15 +6,25 @@ /* Devtree compatible strings for major devices */ #define PCIE_COMPATIBLE "ibm,wsp-pciex" +extern void wsp_setup_arch(void); +extern void wsp_setup_irq(void); +extern int wsp_probe_devices(void); +extern void wsp_halt(void); + extern void wsp_setup_pci(void); extern void scom_init_wsp(void); extern void a2_setup_smp(void); extern int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx, struct device_node *np); -int smp_a2_cpu_bootable(unsigned int nr); -int __devinit smp_a2_kick_cpu(int nr); +extern int smp_a2_cpu_bootable(unsigned int nr); +extern int __devinit smp_a2_kick_cpu(int nr); + +extern void opb_pic_init(void); -void opb_pic_init(void); +/* chroma specific managment */ +extern void wsp_h8_restart(char *cmd); +extern void wsp_h8_power_off(void); +extern void __init wsp_setup_h8(void); #endif /* __WSP_H */ diff --git a/arch/powerpc/relocs_check.pl b/arch/powerpc/relocs_check.pl index d2571096c3e9..7f5b83808862 100755 --- a/arch/powerpc/relocs_check.pl +++ b/arch/powerpc/relocs_check.pl @@ -32,8 +32,18 @@ while (<FD>) { next if (!/\s+R_/); # These relocations are okay - next if (/R_PPC64_RELATIVE/ or /R_PPC64_NONE/ or - /R_PPC64_ADDR64\s+mach_/); + # On PPC64: + # R_PPC64_RELATIVE, R_PPC64_NONE, R_PPC64_ADDR64 + # On PPC: + # R_PPC_RELATIVE, R_PPC_ADDR16_HI, + # R_PPC_ADDR16_HA,R_PPC_ADDR16_LO, + # R_PPC_NONE + + next if (/\bR_PPC64_RELATIVE\b/ or /\bR_PPC64_NONE\b/ or + /\bR_PPC64_ADDR64\s+mach_/); + next if (/\bR_PPC_ADDR16_LO\b/ or /\bR_PPC_ADDR16_HI\b/ or + /\bR_PPC_ADDR16_HA\b/ or /\bR_PPC_RELATIVE\b/ or + /\bR_PPC_NONE\b/); # If we see this type of relcoation it's an idication that # we /may/ be using an old version of binutils. diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 84e13253aec5..5e37b4717864 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -17,10 +17,11 @@ obj-$(CONFIG_FSL_SOC) += fsl_soc.o obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y) obj-$(CONFIG_FSL_PMC) += fsl_pmc.o obj-$(CONFIG_FSL_LBC) += fsl_lbc.o +obj-$(CONFIG_FSL_IFC) += fsl_ifc.o obj-$(CONFIG_FSL_GTM) += fsl_gtm.o obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o -obj-$(CONFIG_FSL_RIO) += fsl_rio.o +obj-$(CONFIG_FSL_RIO) += fsl_rio.o fsl_rmu.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/ diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c index ba4271919062..1c16141c031c 100644 --- a/arch/powerpc/sysdev/axonram.c +++ b/arch/powerpc/sysdev/axonram.c @@ -25,7 +25,6 @@ #include <linux/bio.h> #include <linux/blkdev.h> -#include <linux/buffer_head.h> #include <linux/device.h> #include <linux/errno.h> #include <linux/fs.h> diff --git a/arch/powerpc/sysdev/fsl_ifc.c b/arch/powerpc/sysdev/fsl_ifc.c new file mode 100644 index 000000000000..b31f19f61031 --- /dev/null +++ b/arch/powerpc/sysdev/fsl_ifc.c @@ -0,0 +1,310 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc + * + * Freescale Integrated Flash Controller + * + * Author: Dipen Dudhat <Dipen.Dudhat@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/compiler.h> +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <asm/prom.h> +#include <asm/fsl_ifc.h> + +struct fsl_ifc_ctrl *fsl_ifc_ctrl_dev; +EXPORT_SYMBOL(fsl_ifc_ctrl_dev); + +/* + * convert_ifc_address - convert the base address + * @addr_base: base address of the memory bank + */ +unsigned int convert_ifc_address(phys_addr_t addr_base) +{ + return addr_base & CSPR_BA; +} +EXPORT_SYMBOL(convert_ifc_address); + +/* + * fsl_ifc_find - find IFC bank + * @addr_base: base address of the memory bank + * + * This function walks IFC banks comparing "Base address" field of the CSPR + * registers with the supplied addr_base argument. When bases match this + * function returns bank number (starting with 0), otherwise it returns + * appropriate errno value. + */ +int fsl_ifc_find(phys_addr_t addr_base) +{ + int i = 0; + + if (!fsl_ifc_ctrl_dev || !fsl_ifc_ctrl_dev->regs) + return -ENODEV; + + for (i = 0; i < ARRAY_SIZE(fsl_ifc_ctrl_dev->regs->cspr_cs); i++) { + __be32 cspr = in_be32(&fsl_ifc_ctrl_dev->regs->cspr_cs[i].cspr); + if (cspr & CSPR_V && (cspr & CSPR_BA) == + convert_ifc_address(addr_base)) + return i; + } + + return -ENOENT; +} +EXPORT_SYMBOL(fsl_ifc_find); + +static int __devinit fsl_ifc_ctrl_init(struct fsl_ifc_ctrl *ctrl) +{ + struct fsl_ifc_regs __iomem *ifc = ctrl->regs; + + /* + * Clear all the common status and event registers + */ + if (in_be32(&ifc->cm_evter_stat) & IFC_CM_EVTER_STAT_CSER) + out_be32(&ifc->cm_evter_stat, IFC_CM_EVTER_STAT_CSER); + + /* enable all error and events */ + out_be32(&ifc->cm_evter_en, IFC_CM_EVTER_EN_CSEREN); + + /* enable all error and event interrupts */ + out_be32(&ifc->cm_evter_intr_en, IFC_CM_EVTER_INTR_EN_CSERIREN); + out_be32(&ifc->cm_erattr0, 0x0); + out_be32(&ifc->cm_erattr1, 0x0); + + return 0; +} + +static int fsl_ifc_ctrl_remove(struct platform_device *dev) +{ + struct fsl_ifc_ctrl *ctrl = dev_get_drvdata(&dev->dev); + + free_irq(ctrl->nand_irq, ctrl); + free_irq(ctrl->irq, ctrl); + + irq_dispose_mapping(ctrl->nand_irq); + irq_dispose_mapping(ctrl->irq); + + iounmap(ctrl->regs); + + dev_set_drvdata(&dev->dev, NULL); + kfree(ctrl); + + return 0; +} + +/* + * NAND events are split between an operational interrupt which only + * receives OPC, and an error interrupt that receives everything else, + * including non-NAND errors. Whichever interrupt gets to it first + * records the status and wakes the wait queue. + */ +static DEFINE_SPINLOCK(nand_irq_lock); + +static u32 check_nand_stat(struct fsl_ifc_ctrl *ctrl) +{ + struct fsl_ifc_regs __iomem *ifc = ctrl->regs; + unsigned long flags; + u32 stat; + + spin_lock_irqsave(&nand_irq_lock, flags); + + stat = in_be32(&ifc->ifc_nand.nand_evter_stat); + if (stat) { + out_be32(&ifc->ifc_nand.nand_evter_stat, stat); + ctrl->nand_stat = stat; + wake_up(&ctrl->nand_wait); + } + + spin_unlock_irqrestore(&nand_irq_lock, flags); + + return stat; +} + +static irqreturn_t fsl_ifc_nand_irq(int irqno, void *data) +{ + struct fsl_ifc_ctrl *ctrl = data; + + if (check_nand_stat(ctrl)) + return IRQ_HANDLED; + + return IRQ_NONE; +} + +/* + * NOTE: This interrupt is used to report ifc events of various kinds, + * such as transaction errors on the chipselects. + */ +static irqreturn_t fsl_ifc_ctrl_irq(int irqno, void *data) +{ + struct fsl_ifc_ctrl *ctrl = data; + struct fsl_ifc_regs __iomem *ifc = ctrl->regs; + u32 err_axiid, err_srcid, status, cs_err, err_addr; + irqreturn_t ret = IRQ_NONE; + + /* read for chip select error */ + cs_err = in_be32(&ifc->cm_evter_stat); + if (cs_err) { + dev_err(ctrl->dev, "transaction sent to IFC is not mapped to" + "any memory bank 0x%08X\n", cs_err); + /* clear the chip select error */ + out_be32(&ifc->cm_evter_stat, IFC_CM_EVTER_STAT_CSER); + + /* read error attribute registers print the error information */ + status = in_be32(&ifc->cm_erattr0); + err_addr = in_be32(&ifc->cm_erattr1); + + if (status & IFC_CM_ERATTR0_ERTYP_READ) + dev_err(ctrl->dev, "Read transaction error" + "CM_ERATTR0 0x%08X\n", status); + else + dev_err(ctrl->dev, "Write transaction error" + "CM_ERATTR0 0x%08X\n", status); + + err_axiid = (status & IFC_CM_ERATTR0_ERAID) >> + IFC_CM_ERATTR0_ERAID_SHIFT; + dev_err(ctrl->dev, "AXI ID of the error" + "transaction 0x%08X\n", err_axiid); + + err_srcid = (status & IFC_CM_ERATTR0_ESRCID) >> + IFC_CM_ERATTR0_ESRCID_SHIFT; + dev_err(ctrl->dev, "SRC ID of the error" + "transaction 0x%08X\n", err_srcid); + + dev_err(ctrl->dev, "Transaction Address corresponding to error" + "ERADDR 0x%08X\n", err_addr); + + ret = IRQ_HANDLED; + } + + if (check_nand_stat(ctrl)) + ret = IRQ_HANDLED; + + return ret; +} + +/* + * fsl_ifc_ctrl_probe + * + * called by device layer when it finds a device matching + * one our driver can handled. This code allocates all of + * the resources needed for the controller only. The + * resources for the NAND banks themselves are allocated + * in the chip probe function. +*/ +static int __devinit fsl_ifc_ctrl_probe(struct platform_device *dev) +{ + int ret = 0; + + + dev_info(&dev->dev, "Freescale Integrated Flash Controller\n"); + + fsl_ifc_ctrl_dev = kzalloc(sizeof(*fsl_ifc_ctrl_dev), GFP_KERNEL); + if (!fsl_ifc_ctrl_dev) + return -ENOMEM; + + dev_set_drvdata(&dev->dev, fsl_ifc_ctrl_dev); + + /* IOMAP the entire IFC region */ + fsl_ifc_ctrl_dev->regs = of_iomap(dev->dev.of_node, 0); + if (!fsl_ifc_ctrl_dev->regs) { + dev_err(&dev->dev, "failed to get memory region\n"); + ret = -ENODEV; + goto err; + } + + /* get the Controller level irq */ + fsl_ifc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0); + if (fsl_ifc_ctrl_dev->irq == NO_IRQ) { + dev_err(&dev->dev, "failed to get irq resource " + "for IFC\n"); + ret = -ENODEV; + goto err; + } + + /* get the nand machine irq */ + fsl_ifc_ctrl_dev->nand_irq = + irq_of_parse_and_map(dev->dev.of_node, 1); + if (fsl_ifc_ctrl_dev->nand_irq == NO_IRQ) { + dev_err(&dev->dev, "failed to get irq resource " + "for NAND Machine\n"); + ret = -ENODEV; + goto err; + } + + fsl_ifc_ctrl_dev->dev = &dev->dev; + + ret = fsl_ifc_ctrl_init(fsl_ifc_ctrl_dev); + if (ret < 0) + goto err; + + init_waitqueue_head(&fsl_ifc_ctrl_dev->nand_wait); + + ret = request_irq(fsl_ifc_ctrl_dev->irq, fsl_ifc_ctrl_irq, IRQF_SHARED, + "fsl-ifc", fsl_ifc_ctrl_dev); + if (ret != 0) { + dev_err(&dev->dev, "failed to install irq (%d)\n", + fsl_ifc_ctrl_dev->irq); + goto err_irq; + } + + ret = request_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_nand_irq, 0, + "fsl-ifc-nand", fsl_ifc_ctrl_dev); + if (ret != 0) { + dev_err(&dev->dev, "failed to install irq (%d)\n", + fsl_ifc_ctrl_dev->nand_irq); + goto err_nandirq; + } + + return 0; + +err_nandirq: + free_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_ctrl_dev); + irq_dispose_mapping(fsl_ifc_ctrl_dev->nand_irq); +err_irq: + free_irq(fsl_ifc_ctrl_dev->irq, fsl_ifc_ctrl_dev); + irq_dispose_mapping(fsl_ifc_ctrl_dev->irq); +err: + return ret; +} + +static const struct of_device_id fsl_ifc_match[] = { + { + .compatible = "fsl,ifc", + }, + {}, +}; + +static struct platform_driver fsl_ifc_ctrl_driver = { + .driver = { + .name = "fsl-ifc", + .of_match_table = fsl_ifc_match, + }, + .probe = fsl_ifc_ctrl_probe, + .remove = fsl_ifc_ctrl_remove, +}; + +module_platform_driver(fsl_ifc_ctrl_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Freescale Semiconductor"); +MODULE_DESCRIPTION("Freescale Integrated Flash Controller driver"); diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index d5c3c90ee698..483126d7b3c0 100644 --- a/arch/powerpc/sysdev/fsl_lbc.c +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -332,6 +332,38 @@ err: return ret; } +#ifdef CONFIG_SUSPEND + +/* save lbc registers */ +static int fsl_lbc_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&pdev->dev); + struct fsl_lbc_regs __iomem *lbc = ctrl->regs; + + ctrl->saved_regs = kmalloc(sizeof(struct fsl_lbc_regs), GFP_KERNEL); + if (!ctrl->saved_regs) + return -ENOMEM; + + _memcpy_fromio(ctrl->saved_regs, lbc, sizeof(struct fsl_lbc_regs)); + return 0; +} + +/* restore lbc registers */ +static int fsl_lbc_resume(struct platform_device *pdev) +{ + struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&pdev->dev); + struct fsl_lbc_regs __iomem *lbc = ctrl->regs; + + if (ctrl->saved_regs) { + _memcpy_toio(lbc, ctrl->saved_regs, + sizeof(struct fsl_lbc_regs)); + kfree(ctrl->saved_regs); + ctrl->saved_regs = NULL; + } + return 0; +} +#endif /* CONFIG_SUSPEND */ + static const struct of_device_id fsl_lbc_match[] = { { .compatible = "fsl,elbc", }, { .compatible = "fsl,pq3-localbus", }, @@ -346,6 +378,10 @@ static struct platform_driver fsl_lbc_ctrl_driver = { .of_match_table = fsl_lbc_match, }, .probe = fsl_lbc_ctrl_probe, +#ifdef CONFIG_SUSPEND + .suspend = fsl_lbc_suspend, + .resume = fsl_lbc_resume, +#endif }; static int __init fsl_lbc_init(void) diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c index e5c344d336ea..ecb5c1946d22 100644 --- a/arch/powerpc/sysdev/fsl_msi.c +++ b/arch/powerpc/sysdev/fsl_msi.c @@ -23,6 +23,8 @@ #include <asm/hw_irq.h> #include <asm/ppc-pci.h> #include <asm/mpic.h> +#include <asm/fsl_hcalls.h> + #include "fsl_msi.h" #include "fsl_pci.h" @@ -148,14 +150,49 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq, static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) { + struct pci_controller *hose = pci_bus_to_host(pdev->bus); + struct device_node *np; + phandle phandle = 0; int rc, hwirq = -ENOMEM; unsigned int virq; struct msi_desc *entry; struct msi_msg msg; struct fsl_msi *msi_data; + /* + * If the PCI node has an fsl,msi property, then we need to use it + * to find the specific MSI. + */ + np = of_parse_phandle(hose->dn, "fsl,msi", 0); + if (np) { + if (of_device_is_compatible(np, "fsl,mpic-msi") || + of_device_is_compatible(np, "fsl,vmpic-msi")) + phandle = np->phandle; + else { + dev_err(&pdev->dev, + "node %s has an invalid fsl,msi phandle %u\n", + hose->dn->full_name, np->phandle); + return -EINVAL; + } + } + list_for_each_entry(entry, &pdev->msi_list, list) { + /* + * Loop over all the MSI devices until we find one that has an + * available interrupt. + */ list_for_each_entry(msi_data, &msi_head, list) { + /* + * If the PCI node has an fsl,msi property, then we + * restrict our search to the corresponding MSI node. + * The simplest way is to skip over MSI nodes with the + * wrong phandle. Under the Freescale hypervisor, this + * has the additional benefit of skipping over MSI + * nodes that are not mapped in the PAMU. + */ + if (phandle && (phandle != msi_data->phandle)) + continue; + hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1); if (hwirq >= 0) break; @@ -163,16 +200,14 @@ static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) if (hwirq < 0) { rc = hwirq; - pr_debug("%s: fail allocating msi interrupt\n", - __func__); + dev_err(&pdev->dev, "could not allocate MSI interrupt\n"); goto out_free; } virq = irq_create_mapping(msi_data->irqhost, hwirq); if (virq == NO_IRQ) { - pr_debug("%s: fail mapping hwirq 0x%x\n", - __func__, hwirq); + dev_err(&pdev->dev, "fail mapping hwirq %i\n", hwirq); msi_bitmap_free_hwirqs(&msi_data->bitmap, hwirq, 1); rc = -ENOSPC; goto out_free; @@ -201,6 +236,7 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc) u32 intr_index; u32 have_shift = 0; struct fsl_msi_cascade_data *cascade_data; + unsigned int ret; cascade_data = irq_get_handler_data(irq); msi_data = cascade_data->msi_data; @@ -232,6 +268,14 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc) case FSL_PIC_IP_IPIC: msir_value = fsl_msi_read(msi_data->msi_regs, msir_index * 0x4); break; + case FSL_PIC_IP_VMPIC: + ret = fh_vmpic_get_msir(virq_to_hw(irq), &msir_value); + if (ret) { + pr_err("fsl-msi: fh_vmpic_get_msir() failed for " + "irq %u (ret=%u)\n", irq, ret); + msir_value = 0; + } + break; } while (msir_value) { @@ -249,6 +293,7 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc) switch (msi_data->feature & FSL_PIC_IP_MASK) { case FSL_PIC_IP_MPIC: + case FSL_PIC_IP_VMPIC: chip->irq_eoi(idata); break; case FSL_PIC_IP_IPIC: @@ -278,7 +323,8 @@ static int fsl_of_msi_remove(struct platform_device *ofdev) } if (msi->bitmap.bitmap) msi_bitmap_free(&msi->bitmap); - iounmap(msi->msi_regs); + if ((msi->feature & FSL_PIC_IP_MASK) != FSL_PIC_IP_VMPIC) + iounmap(msi->msi_regs); kfree(msi); return 0; @@ -350,25 +396,37 @@ static int __devinit fsl_of_msi_probe(struct platform_device *dev) goto error_out; } - /* Get the MSI reg base */ - err = of_address_to_resource(dev->dev.of_node, 0, &res); - if (err) { - dev_err(&dev->dev, "%s resource error!\n", + /* + * Under the Freescale hypervisor, the msi nodes don't have a 'reg' + * property. Instead, we use hypercalls to access the MSI. + */ + if ((features->fsl_pic_ip & FSL_PIC_IP_MASK) != FSL_PIC_IP_VMPIC) { + err = of_address_to_resource(dev->dev.of_node, 0, &res); + if (err) { + dev_err(&dev->dev, "invalid resource for node %s\n", dev->dev.of_node->full_name); - goto error_out; - } + goto error_out; + } - msi->msi_regs = ioremap(res.start, resource_size(&res)); - if (!msi->msi_regs) { - dev_err(&dev->dev, "ioremap problem failed\n"); - goto error_out; + msi->msi_regs = ioremap(res.start, resource_size(&res)); + if (!msi->msi_regs) { + dev_err(&dev->dev, "could not map node %s\n", + dev->dev.of_node->full_name); + goto error_out; + } + msi->msiir_offset = + features->msiir_offset + (res.start & 0xfffff); } msi->feature = features->fsl_pic_ip; msi->irqhost->host_data = msi; - msi->msiir_offset = features->msiir_offset + (res.start & 0xfffff); + /* + * Remember the phandle, so that we can match with any PCI nodes + * that have an "fsl,msi" property. + */ + msi->phandle = dev->dev.of_node->phandle; rc = fsl_msi_init_allocator(msi); if (rc) { @@ -437,6 +495,11 @@ static const struct fsl_msi_feature ipic_msi_feature = { .msiir_offset = 0x38, }; +static const struct fsl_msi_feature vmpic_msi_feature = { + .fsl_pic_ip = FSL_PIC_IP_VMPIC, + .msiir_offset = 0, +}; + static const struct of_device_id fsl_of_msi_ids[] = { { .compatible = "fsl,mpic-msi", @@ -446,6 +509,10 @@ static const struct of_device_id fsl_of_msi_ids[] = { .compatible = "fsl,ipic-msi", .data = (void *)&ipic_msi_feature, }, + { + .compatible = "fsl,vmpic-msi", + .data = (void *)&vmpic_msi_feature, + }, {} }; diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h index 1313abbc5200..f6c646a52541 100644 --- a/arch/powerpc/sysdev/fsl_msi.h +++ b/arch/powerpc/sysdev/fsl_msi.h @@ -13,15 +13,17 @@ #ifndef _POWERPC_SYSDEV_FSL_MSI_H #define _POWERPC_SYSDEV_FSL_MSI_H +#include <linux/of.h> #include <asm/msi_bitmap.h> #define NR_MSI_REG 8 #define IRQS_PER_MSI_REG 32 #define NR_MSI_IRQS (NR_MSI_REG * IRQS_PER_MSI_REG) -#define FSL_PIC_IP_MASK 0x0000000F -#define FSL_PIC_IP_MPIC 0x00000001 -#define FSL_PIC_IP_IPIC 0x00000002 +#define FSL_PIC_IP_MASK 0x0000000F +#define FSL_PIC_IP_MPIC 0x00000001 +#define FSL_PIC_IP_IPIC 0x00000002 +#define FSL_PIC_IP_VMPIC 0x00000003 struct fsl_msi { struct irq_host *irqhost; @@ -36,6 +38,8 @@ struct fsl_msi { struct msi_bitmap bitmap; struct list_head list; /* support multiple MSI banks */ + + phandle phandle; }; #endif /* _POWERPC_SYSDEV_FSL_MSI_H */ diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 4ce547e00473..3b61e8cf3421 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -65,6 +65,30 @@ static int __init fsl_pcie_check_link(struct pci_controller *hose) } #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) + +#define MAX_PHYS_ADDR_BITS 40 +static u64 pci64_dma_offset = 1ull << MAX_PHYS_ADDR_BITS; + +static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask) +{ + if (!dev->dma_mask || !dma_supported(dev, dma_mask)) + return -EIO; + + /* + * Fixup PCI devices that are able to DMA to above the physical + * address width of the SoC such that we can address any internal + * SoC address from across PCI if needed + */ + if ((dev->bus == &pci_bus_type) && + dma_mask >= DMA_BIT_MASK(MAX_PHYS_ADDR_BITS)) { + set_dma_ops(dev, &dma_direct_ops); + set_dma_offset(dev, pci64_dma_offset); + } + + *dev->dma_mask = dma_mask; + return 0; +} + static int __init setup_one_atmu(struct ccsr_pci __iomem *pci, unsigned int index, const struct resource *res, resource_size_t offset) @@ -113,6 +137,8 @@ static void __init setup_pci_atmu(struct pci_controller *hose, u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL | PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP; char *name = hose->dn->full_name; + const u64 *reg; + int len; pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n", (u64)rsrc->start, (u64)resource_size(rsrc)); @@ -205,6 +231,33 @@ static void __init setup_pci_atmu(struct pci_controller *hose, /* Setup inbound mem window */ mem = memblock_end_of_DRAM(); + + /* + * The msi-address-64 property, if it exists, indicates the physical + * address of the MSIIR register. Normally, this register is located + * inside CCSR, so the ATMU that covers all of CCSR is used. But if + * this property exists, then we normally need to create a new ATMU + * for it. For now, however, we cheat. The only entity that creates + * this property is the Freescale hypervisor, and the address is + * specified in the partition configuration. Typically, the address + * is located in the page immediately after the end of DDR. If so, we + * can avoid allocating a new ATMU by extending the DDR ATMU by one + * page. + */ + reg = of_get_property(hose->dn, "msi-address-64", &len); + if (reg && (len == sizeof(u64))) { + u64 address = be64_to_cpup(reg); + + if ((address >= mem) && (address < (mem + PAGE_SIZE))) { + pr_info("%s: extending DDR ATMU to cover MSIIR", name); + mem += PAGE_SIZE; + } else { + /* TODO: Create a new ATMU for MSIIR */ + pr_warn("%s: msi-address-64 address of %llx is " + "unsupported\n", name, address); + } + } + sz = min(mem, paddr_lo); mem_log = __ilog2_u64(sz); @@ -228,6 +281,37 @@ static void __init setup_pci_atmu(struct pci_controller *hose, hose->dma_window_base_cur = 0x00000000; hose->dma_window_size = (resource_size_t)sz; + + /* + * if we have >4G of memory setup second PCI inbound window to + * let devices that are 64-bit address capable to work w/o + * SWIOTLB and access the full range of memory + */ + if (sz != mem) { + mem_log = __ilog2_u64(mem); + + /* Size window up if we dont fit in exact power-of-2 */ + if ((1ull << mem_log) != mem) + mem_log++; + + piwar = (piwar & ~PIWAR_SZ_MASK) | (mem_log - 1); + + /* Setup inbound memory window */ + out_be32(&pci->piw[win_idx].pitar, 0x00000000); + out_be32(&pci->piw[win_idx].piwbear, + pci64_dma_offset >> 44); + out_be32(&pci->piw[win_idx].piwbar, + pci64_dma_offset >> 12); + out_be32(&pci->piw[win_idx].piwar, piwar); + + /* + * install our own dma_set_mask handler to fixup dma_ops + * and dma_offset + */ + ppc_md.dma_set_mask = fsl_pci_dma_set_mask; + + pr_info("%s: Setup 64-bit PCI DMA window\n", name); + } } else { u64 paddr = 0; diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 22ffccd8bef5..a4c4f4a932d8 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -10,7 +10,7 @@ * - Added Port-Write message handling * - Added Machine Check exception handling * - * Copyright (C) 2007, 2008, 2010 Freescale Semiconductor, Inc. + * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc. * Zhang Wei <wei.zhang@freescale.com> * * Copyright 2005 MontaVista Software, Inc. @@ -28,240 +28,33 @@ #include <linux/dma-mapping.h> #include <linux/interrupt.h> #include <linux/device.h> -#include <linux/rio.h> -#include <linux/rio_drv.h> #include <linux/of_platform.h> #include <linux/delay.h> #include <linux/slab.h> -#include <linux/kfifo.h> -#include <asm/io.h> +#include <linux/io.h> +#include <linux/uaccess.h> #include <asm/machdep.h> -#include <asm/uaccess.h> -#undef DEBUG_PW /* Port-Write debugging */ +#include "fsl_rio.h" -/* RapidIO definition irq, which read from OF-tree */ -#define IRQ_RIO_BELL(m) (((struct rio_priv *)(m->priv))->bellirq) -#define IRQ_RIO_TX(m) (((struct rio_priv *)(m->priv))->txirq) -#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq) -#define IRQ_RIO_PW(m) (((struct rio_priv *)(m->priv))->pwirq) - -#define IPWSR_CLEAR 0x98 -#define OMSR_CLEAR 0x1cb3 -#define IMSR_CLEAR 0x491 -#define IDSR_CLEAR 0x91 -#define ODSR_CLEAR 0x1c00 -#define LTLEECSR_ENABLE_ALL 0xFFC000FC -#define ESCSR_CLEAR 0x07120204 -#define IECSR_CLEAR 0x80000000 +#undef DEBUG_PW /* Port-Write debugging */ #define RIO_PORT1_EDCSR 0x0640 #define RIO_PORT2_EDCSR 0x0680 #define RIO_PORT1_IECSR 0x10130 #define RIO_PORT2_IECSR 0x101B0 -#define RIO_IM0SR 0x13064 -#define RIO_IM1SR 0x13164 -#define RIO_OM0SR 0x13004 -#define RIO_OM1SR 0x13104 - -#define RIO_ATMU_REGS_OFFSET 0x10c00 -#define RIO_P_MSG_REGS_OFFSET 0x11000 -#define RIO_S_MSG_REGS_OFFSET 0x13000 + #define RIO_GCCSR 0x13c #define RIO_ESCSR 0x158 +#define ESCSR_CLEAR 0x07120204 #define RIO_PORT2_ESCSR 0x178 #define RIO_CCSR 0x15c -#define RIO_LTLEDCSR 0x0608 #define RIO_LTLEDCSR_IER 0x80000000 #define RIO_LTLEDCSR_PRT 0x01000000 -#define RIO_LTLEECSR 0x060c -#define RIO_EPWISR 0x10010 +#define IECSR_CLEAR 0x80000000 #define RIO_ISR_AACR 0x10120 #define RIO_ISR_AACR_AA 0x1 /* Accept All ID */ -#define RIO_MAINT_WIN_SIZE 0x400000 -#define RIO_DBELL_WIN_SIZE 0x1000 - -#define RIO_MSG_OMR_MUI 0x00000002 -#define RIO_MSG_OSR_TE 0x00000080 -#define RIO_MSG_OSR_QOI 0x00000020 -#define RIO_MSG_OSR_QFI 0x00000010 -#define RIO_MSG_OSR_MUB 0x00000004 -#define RIO_MSG_OSR_EOMI 0x00000002 -#define RIO_MSG_OSR_QEI 0x00000001 - -#define RIO_MSG_IMR_MI 0x00000002 -#define RIO_MSG_ISR_TE 0x00000080 -#define RIO_MSG_ISR_QFI 0x00000010 -#define RIO_MSG_ISR_DIQI 0x00000001 - -#define RIO_IPWMR_SEN 0x00100000 -#define RIO_IPWMR_QFIE 0x00000100 -#define RIO_IPWMR_EIE 0x00000020 -#define RIO_IPWMR_CQ 0x00000002 -#define RIO_IPWMR_PWE 0x00000001 - -#define RIO_IPWSR_QF 0x00100000 -#define RIO_IPWSR_TE 0x00000080 -#define RIO_IPWSR_QFI 0x00000010 -#define RIO_IPWSR_PWD 0x00000008 -#define RIO_IPWSR_PWB 0x00000004 - -/* EPWISR Error match value */ -#define RIO_EPWISR_PINT1 0x80000000 -#define RIO_EPWISR_PINT2 0x40000000 -#define RIO_EPWISR_MU 0x00000002 -#define RIO_EPWISR_PW 0x00000001 - -#define RIO_MSG_DESC_SIZE 32 -#define RIO_MSG_BUFFER_SIZE 4096 -#define RIO_MIN_TX_RING_SIZE 2 -#define RIO_MAX_TX_RING_SIZE 2048 -#define RIO_MIN_RX_RING_SIZE 2 -#define RIO_MAX_RX_RING_SIZE 2048 - -#define DOORBELL_DMR_DI 0x00000002 -#define DOORBELL_DSR_TE 0x00000080 -#define DOORBELL_DSR_QFI 0x00000010 -#define DOORBELL_DSR_DIQI 0x00000001 -#define DOORBELL_TID_OFFSET 0x02 -#define DOORBELL_SID_OFFSET 0x04 -#define DOORBELL_INFO_OFFSET 0x06 - -#define DOORBELL_MESSAGE_SIZE 0x08 -#define DBELL_SID(x) (*(u16 *)(x + DOORBELL_SID_OFFSET)) -#define DBELL_TID(x) (*(u16 *)(x + DOORBELL_TID_OFFSET)) -#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET)) - -struct rio_atmu_regs { - u32 rowtar; - u32 rowtear; - u32 rowbar; - u32 pad2; - u32 rowar; - u32 pad3[3]; -}; - -struct rio_msg_regs { - u32 omr; /* 0xD_3000 - Outbound message 0 mode register */ - u32 osr; /* 0xD_3004 - Outbound message 0 status register */ - u32 pad1; - u32 odqdpar; /* 0xD_300C - Outbound message 0 descriptor queue - dequeue pointer address register */ - u32 pad2; - u32 osar; /* 0xD_3014 - Outbound message 0 source address - register */ - u32 odpr; /* 0xD_3018 - Outbound message 0 destination port - register */ - u32 odatr; /* 0xD_301C - Outbound message 0 destination attributes - Register*/ - u32 odcr; /* 0xD_3020 - Outbound message 0 double-word count - register */ - u32 pad3; - u32 odqepar; /* 0xD_3028 - Outbound message 0 descriptor queue - enqueue pointer address register */ - u32 pad4[13]; - u32 imr; /* 0xD_3060 - Inbound message 0 mode register */ - u32 isr; /* 0xD_3064 - Inbound message 0 status register */ - u32 pad5; - u32 ifqdpar; /* 0xD_306C - Inbound message 0 frame queue dequeue - pointer address register*/ - u32 pad6; - u32 ifqepar; /* 0xD_3074 - Inbound message 0 frame queue enqueue - pointer address register */ - u32 pad7[226]; - u32 odmr; /* 0xD_3400 - Outbound doorbell mode register */ - u32 odsr; /* 0xD_3404 - Outbound doorbell status register */ - u32 res0[4]; - u32 oddpr; /* 0xD_3418 - Outbound doorbell destination port - register */ - u32 oddatr; /* 0xD_341c - Outbound doorbell destination attributes - register */ - u32 res1[3]; - u32 odretcr; /* 0xD_342C - Outbound doorbell retry error threshold - configuration register */ - u32 res2[12]; - u32 dmr; /* 0xD_3460 - Inbound doorbell mode register */ - u32 dsr; /* 0xD_3464 - Inbound doorbell status register */ - u32 pad8; - u32 dqdpar; /* 0xD_346C - Inbound doorbell queue dequeue Pointer - address register */ - u32 pad9; - u32 dqepar; /* 0xD_3474 - Inbound doorbell Queue enqueue pointer - address register */ - u32 pad10[26]; - u32 pwmr; /* 0xD_34E0 - Inbound port-write mode register */ - u32 pwsr; /* 0xD_34E4 - Inbound port-write status register */ - u32 epwqbar; /* 0xD_34E8 - Extended Port-Write Queue Base Address - register */ - u32 pwqbar; /* 0xD_34EC - Inbound port-write queue base address - register */ -}; - -struct rio_tx_desc { - u32 res1; - u32 saddr; - u32 dport; - u32 dattr; - u32 res2; - u32 res3; - u32 dwcnt; - u32 res4; -}; - -struct rio_dbell_ring { - void *virt; - dma_addr_t phys; -}; - -struct rio_msg_tx_ring { - void *virt; - dma_addr_t phys; - void *virt_buffer[RIO_MAX_TX_RING_SIZE]; - dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE]; - int tx_slot; - int size; - void *dev_id; -}; - -struct rio_msg_rx_ring { - void *virt; - dma_addr_t phys; - void *virt_buffer[RIO_MAX_RX_RING_SIZE]; - int rx_slot; - int size; - void *dev_id; -}; - -struct rio_port_write_msg { - void *virt; - dma_addr_t phys; - u32 msg_count; - u32 err_count; - u32 discard_count; -}; - -struct rio_priv { - struct device *dev; - void __iomem *regs_win; - struct rio_atmu_regs __iomem *atmu_regs; - struct rio_atmu_regs __iomem *maint_atmu_regs; - struct rio_atmu_regs __iomem *dbell_atmu_regs; - void __iomem *dbell_win; - void __iomem *maint_win; - struct rio_msg_regs __iomem *msg_regs; - struct rio_dbell_ring dbell_ring; - struct rio_msg_tx_ring msg_tx_ring; - struct rio_msg_rx_ring msg_rx_ring; - struct rio_port_write_msg port_write_msg; - int bellirq; - int txirq; - int rxirq; - int pwirq; - struct work_struct pw_work; - struct kfifo pw_fifo; - spinlock_t pw_fifo_lock; -}; #define __fsl_read_rio_config(x, addr, err, op) \ __asm__ __volatile__( \ @@ -279,7 +72,12 @@ struct rio_priv { : "=r" (err), "=r" (x) \ : "b" (addr), "i" (-EFAULT), "0" (err)) -static void __iomem *rio_regs_win; +void __iomem *rio_regs_win; +void __iomem *rmu_regs_win; +resource_size_t rio_law_start; + +struct fsl_rio_dbell *dbell; +struct fsl_rio_pw *pw; #ifdef CONFIG_E500 int fsl_rio_mcheck_exception(struct pt_regs *regs) @@ -311,42 +109,6 @@ EXPORT_SYMBOL_GPL(fsl_rio_mcheck_exception); #endif /** - * fsl_rio_doorbell_send - Send a MPC85xx doorbell message - * @mport: RapidIO master port info - * @index: ID of RapidIO interface - * @destid: Destination ID of target device - * @data: 16-bit info field of RapidIO doorbell message - * - * Sends a MPC85xx doorbell message. Returns %0 on success or - * %-EINVAL on failure. - */ -static int fsl_rio_doorbell_send(struct rio_mport *mport, - int index, u16 destid, u16 data) -{ - struct rio_priv *priv = mport->priv; - pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n", - index, destid, data); - switch (mport->phy_type) { - case RIO_PHY_PARALLEL: - out_be32(&priv->dbell_atmu_regs->rowtar, destid << 22); - out_be16(priv->dbell_win, data); - break; - case RIO_PHY_SERIAL: - /* In the serial version silicons, such as MPC8548, MPC8641, - * below operations is must be. - */ - out_be32(&priv->msg_regs->odmr, 0x00000000); - out_be32(&priv->msg_regs->odretcr, 0x00000004); - out_be32(&priv->msg_regs->oddpr, destid << 16); - out_be32(&priv->msg_regs->oddatr, data); - out_be32(&priv->msg_regs->odmr, 0x00000001); - break; - } - - return 0; -} - -/** * fsl_local_config_read - Generate a MPC85xx local config space read * @mport: RapidIO master port info * @index: ID of RapdiIO interface @@ -384,8 +146,8 @@ static int fsl_local_config_write(struct rio_mport *mport, { struct rio_priv *priv = mport->priv; pr_debug - ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n", - index, offset, data); + ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n", + index, offset, data); out_be32(priv->regs_win + offset, data); return 0; @@ -413,8 +175,9 @@ fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid, u32 rval, err = 0; pr_debug - ("fsl_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n", - index, destid, hopcount, offset, len); + ("fsl_rio_config_read:" + " index %d destid %d hopcount %d offset %8.8x len %d\n", + index, destid, hopcount, offset, len); /* 16MB maintenance window possible */ /* allow only aligned access to maintenance registers */ @@ -423,7 +186,7 @@ fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid, out_be32(&priv->maint_atmu_regs->rowtar, (destid << 22) | (hopcount << 12) | (offset >> 12)); - out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10)); + out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10)); data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1)); switch (len) { @@ -470,8 +233,9 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid, struct rio_priv *priv = mport->priv; u8 *data; pr_debug - ("fsl_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n", - index, destid, hopcount, offset, len, val); + ("fsl_rio_config_write:" + " index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n", + index, destid, hopcount, offset, len, val); /* 16MB maintenance windows possible */ /* allow only aligned access to maintenance registers */ @@ -480,7 +244,7 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid, out_be32(&priv->maint_atmu_regs->rowtar, (destid << 22) | (hopcount << 12) | (offset >> 12)); - out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10)); + out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10)); data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1)); switch (len) { @@ -500,590 +264,7 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid, return 0; } -/** - * fsl_add_outb_message - Add message to the MPC85xx outbound message queue - * @mport: Master port with outbound message queue - * @rdev: Target of outbound message - * @mbox: Outbound mailbox - * @buffer: Message to add to outbound queue - * @len: Length of message - * - * Adds the @buffer message to the MPC85xx outbound message queue. Returns - * %0 on success or %-EINVAL on failure. - */ -static int -fsl_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox, - void *buffer, size_t len) -{ - struct rio_priv *priv = mport->priv; - u32 omr; - struct rio_tx_desc *desc = (struct rio_tx_desc *)priv->msg_tx_ring.virt - + priv->msg_tx_ring.tx_slot; - int ret = 0; - - pr_debug("RIO: fsl_add_outb_message(): destid %4.4x mbox %d buffer " \ - "%8.8x len %8.8x\n", rdev->destid, mbox, (int)buffer, len); - - if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) { - ret = -EINVAL; - goto out; - } - - /* Copy and clear rest of buffer */ - memcpy(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot], buffer, - len); - if (len < (RIO_MAX_MSG_SIZE - 4)) - memset(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot] - + len, 0, RIO_MAX_MSG_SIZE - len); - - switch (mport->phy_type) { - case RIO_PHY_PARALLEL: - /* Set mbox field for message */ - desc->dport = mbox & 0x3; - - /* Enable EOMI interrupt, set priority, and set destid */ - desc->dattr = 0x28000000 | (rdev->destid << 2); - break; - case RIO_PHY_SERIAL: - /* Set mbox field for message, and set destid */ - desc->dport = (rdev->destid << 16) | (mbox & 0x3); - - /* Enable EOMI interrupt and priority */ - desc->dattr = 0x28000000; - break; - } - - /* Set transfer size aligned to next power of 2 (in double words) */ - desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len); - - /* Set snooping and source buffer address */ - desc->saddr = 0x00000004 - | priv->msg_tx_ring.phys_buffer[priv->msg_tx_ring.tx_slot]; - - /* Increment enqueue pointer */ - omr = in_be32(&priv->msg_regs->omr); - out_be32(&priv->msg_regs->omr, omr | RIO_MSG_OMR_MUI); - - /* Go to next descriptor */ - if (++priv->msg_tx_ring.tx_slot == priv->msg_tx_ring.size) - priv->msg_tx_ring.tx_slot = 0; - - out: - return ret; -} - -/** - * fsl_rio_tx_handler - MPC85xx outbound message interrupt handler - * @irq: Linux interrupt number - * @dev_instance: Pointer to interrupt-specific data - * - * Handles outbound message interrupts. Executes a register outbound - * mailbox event handler and acks the interrupt occurrence. - */ -static irqreturn_t -fsl_rio_tx_handler(int irq, void *dev_instance) -{ - int osr; - struct rio_mport *port = (struct rio_mport *)dev_instance; - struct rio_priv *priv = port->priv; - - osr = in_be32(&priv->msg_regs->osr); - - if (osr & RIO_MSG_OSR_TE) { - pr_info("RIO: outbound message transmission error\n"); - out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_TE); - goto out; - } - - if (osr & RIO_MSG_OSR_QOI) { - pr_info("RIO: outbound message queue overflow\n"); - out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_QOI); - goto out; - } - - if (osr & RIO_MSG_OSR_EOMI) { - u32 dqp = in_be32(&priv->msg_regs->odqdpar); - int slot = (dqp - priv->msg_tx_ring.phys) >> 5; - port->outb_msg[0].mcback(port, priv->msg_tx_ring.dev_id, -1, - slot); - - /* Ack the end-of-message interrupt */ - out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_EOMI); - } - - out: - return IRQ_HANDLED; -} - -/** - * fsl_open_outb_mbox - Initialize MPC85xx outbound mailbox - * @mport: Master port implementing the outbound message unit - * @dev_id: Device specific pointer to pass on event - * @mbox: Mailbox to open - * @entries: Number of entries in the outbound mailbox ring - * - * Initializes buffer ring, request the outbound message interrupt, - * and enables the outbound message unit. Returns %0 on success and - * %-EINVAL or %-ENOMEM on failure. - */ -static int -fsl_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) -{ - int i, j, rc = 0; - struct rio_priv *priv = mport->priv; - - if ((entries < RIO_MIN_TX_RING_SIZE) || - (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) { - rc = -EINVAL; - goto out; - } - - /* Initialize shadow copy ring */ - priv->msg_tx_ring.dev_id = dev_id; - priv->msg_tx_ring.size = entries; - - for (i = 0; i < priv->msg_tx_ring.size; i++) { - priv->msg_tx_ring.virt_buffer[i] = - dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, - &priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL); - if (!priv->msg_tx_ring.virt_buffer[i]) { - rc = -ENOMEM; - for (j = 0; j < priv->msg_tx_ring.size; j++) - if (priv->msg_tx_ring.virt_buffer[j]) - dma_free_coherent(priv->dev, - RIO_MSG_BUFFER_SIZE, - priv->msg_tx_ring. - virt_buffer[j], - priv->msg_tx_ring. - phys_buffer[j]); - goto out; - } - } - - /* Initialize outbound message descriptor ring */ - priv->msg_tx_ring.virt = dma_alloc_coherent(priv->dev, - priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, - &priv->msg_tx_ring.phys, GFP_KERNEL); - if (!priv->msg_tx_ring.virt) { - rc = -ENOMEM; - goto out_dma; - } - memset(priv->msg_tx_ring.virt, 0, - priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE); - priv->msg_tx_ring.tx_slot = 0; - - /* Point dequeue/enqueue pointers at first entry in ring */ - out_be32(&priv->msg_regs->odqdpar, priv->msg_tx_ring.phys); - out_be32(&priv->msg_regs->odqepar, priv->msg_tx_ring.phys); - - /* Configure for snooping */ - out_be32(&priv->msg_regs->osar, 0x00000004); - - /* Clear interrupt status */ - out_be32(&priv->msg_regs->osr, 0x000000b3); - - /* Hook up outbound message handler */ - rc = request_irq(IRQ_RIO_TX(mport), fsl_rio_tx_handler, 0, - "msg_tx", (void *)mport); - if (rc < 0) - goto out_irq; - - /* - * Configure outbound message unit - * Snooping - * Interrupts (all enabled, except QEIE) - * Chaining mode - * Disable - */ - out_be32(&priv->msg_regs->omr, 0x00100220); - - /* Set number of entries */ - out_be32(&priv->msg_regs->omr, - in_be32(&priv->msg_regs->omr) | - ((get_bitmask_order(entries) - 2) << 12)); - - /* Now enable the unit */ - out_be32(&priv->msg_regs->omr, in_be32(&priv->msg_regs->omr) | 0x1); - - out: - return rc; - - out_irq: - dma_free_coherent(priv->dev, - priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, - priv->msg_tx_ring.virt, priv->msg_tx_ring.phys); - - out_dma: - for (i = 0; i < priv->msg_tx_ring.size; i++) - dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, - priv->msg_tx_ring.virt_buffer[i], - priv->msg_tx_ring.phys_buffer[i]); - - return rc; -} - -/** - * fsl_close_outb_mbox - Shut down MPC85xx outbound mailbox - * @mport: Master port implementing the outbound message unit - * @mbox: Mailbox to close - * - * Disables the outbound message unit, free all buffers, and - * frees the outbound message interrupt. - */ -static void fsl_close_outb_mbox(struct rio_mport *mport, int mbox) -{ - struct rio_priv *priv = mport->priv; - /* Disable inbound message unit */ - out_be32(&priv->msg_regs->omr, 0); - - /* Free ring */ - dma_free_coherent(priv->dev, - priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, - priv->msg_tx_ring.virt, priv->msg_tx_ring.phys); - - /* Free interrupt */ - free_irq(IRQ_RIO_TX(mport), (void *)mport); -} - -/** - * fsl_rio_rx_handler - MPC85xx inbound message interrupt handler - * @irq: Linux interrupt number - * @dev_instance: Pointer to interrupt-specific data - * - * Handles inbound message interrupts. Executes a registered inbound - * mailbox event handler and acks the interrupt occurrence. - */ -static irqreturn_t -fsl_rio_rx_handler(int irq, void *dev_instance) -{ - int isr; - struct rio_mport *port = (struct rio_mport *)dev_instance; - struct rio_priv *priv = port->priv; - - isr = in_be32(&priv->msg_regs->isr); - - if (isr & RIO_MSG_ISR_TE) { - pr_info("RIO: inbound message reception error\n"); - out_be32((void *)&priv->msg_regs->isr, RIO_MSG_ISR_TE); - goto out; - } - - /* XXX Need to check/dispatch until queue empty */ - if (isr & RIO_MSG_ISR_DIQI) { - /* - * We implement *only* mailbox 0, but can receive messages - * for any mailbox/letter to that mailbox destination. So, - * make the callback with an unknown/invalid mailbox number - * argument. - */ - port->inb_msg[0].mcback(port, priv->msg_rx_ring.dev_id, -1, -1); - - /* Ack the queueing interrupt */ - out_be32(&priv->msg_regs->isr, RIO_MSG_ISR_DIQI); - } - - out: - return IRQ_HANDLED; -} - -/** - * fsl_open_inb_mbox - Initialize MPC85xx inbound mailbox - * @mport: Master port implementing the inbound message unit - * @dev_id: Device specific pointer to pass on event - * @mbox: Mailbox to open - * @entries: Number of entries in the inbound mailbox ring - * - * Initializes buffer ring, request the inbound message interrupt, - * and enables the inbound message unit. Returns %0 on success - * and %-EINVAL or %-ENOMEM on failure. - */ -static int -fsl_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) -{ - int i, rc = 0; - struct rio_priv *priv = mport->priv; - - if ((entries < RIO_MIN_RX_RING_SIZE) || - (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) { - rc = -EINVAL; - goto out; - } - - /* Initialize client buffer ring */ - priv->msg_rx_ring.dev_id = dev_id; - priv->msg_rx_ring.size = entries; - priv->msg_rx_ring.rx_slot = 0; - for (i = 0; i < priv->msg_rx_ring.size; i++) - priv->msg_rx_ring.virt_buffer[i] = NULL; - - /* Initialize inbound message ring */ - priv->msg_rx_ring.virt = dma_alloc_coherent(priv->dev, - priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE, - &priv->msg_rx_ring.phys, GFP_KERNEL); - if (!priv->msg_rx_ring.virt) { - rc = -ENOMEM; - goto out; - } - - /* Point dequeue/enqueue pointers at first entry in ring */ - out_be32(&priv->msg_regs->ifqdpar, (u32) priv->msg_rx_ring.phys); - out_be32(&priv->msg_regs->ifqepar, (u32) priv->msg_rx_ring.phys); - - /* Clear interrupt status */ - out_be32(&priv->msg_regs->isr, 0x00000091); - - /* Hook up inbound message handler */ - rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0, - "msg_rx", (void *)mport); - if (rc < 0) { - dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, - priv->msg_tx_ring.virt_buffer[i], - priv->msg_tx_ring.phys_buffer[i]); - goto out; - } - - /* - * Configure inbound message unit: - * Snooping - * 4KB max message size - * Unmask all interrupt sources - * Disable - */ - out_be32(&priv->msg_regs->imr, 0x001b0060); - - /* Set number of queue entries */ - setbits32(&priv->msg_regs->imr, (get_bitmask_order(entries) - 2) << 12); - - /* Now enable the unit */ - setbits32(&priv->msg_regs->imr, 0x1); - - out: - return rc; -} - -/** - * fsl_close_inb_mbox - Shut down MPC85xx inbound mailbox - * @mport: Master port implementing the inbound message unit - * @mbox: Mailbox to close - * - * Disables the inbound message unit, free all buffers, and - * frees the inbound message interrupt. - */ -static void fsl_close_inb_mbox(struct rio_mport *mport, int mbox) -{ - struct rio_priv *priv = mport->priv; - /* Disable inbound message unit */ - out_be32(&priv->msg_regs->imr, 0); - - /* Free ring */ - dma_free_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE, - priv->msg_rx_ring.virt, priv->msg_rx_ring.phys); - - /* Free interrupt */ - free_irq(IRQ_RIO_RX(mport), (void *)mport); -} - -/** - * fsl_add_inb_buffer - Add buffer to the MPC85xx inbound message queue - * @mport: Master port implementing the inbound message unit - * @mbox: Inbound mailbox number - * @buf: Buffer to add to inbound queue - * - * Adds the @buf buffer to the MPC85xx inbound message queue. Returns - * %0 on success or %-EINVAL on failure. - */ -static int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf) -{ - int rc = 0; - struct rio_priv *priv = mport->priv; - - pr_debug("RIO: fsl_add_inb_buffer(), msg_rx_ring.rx_slot %d\n", - priv->msg_rx_ring.rx_slot); - - if (priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot]) { - printk(KERN_ERR - "RIO: error adding inbound buffer %d, buffer exists\n", - priv->msg_rx_ring.rx_slot); - rc = -EINVAL; - goto out; - } - - priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot] = buf; - if (++priv->msg_rx_ring.rx_slot == priv->msg_rx_ring.size) - priv->msg_rx_ring.rx_slot = 0; - - out: - return rc; -} - -/** - * fsl_get_inb_message - Fetch inbound message from the MPC85xx message unit - * @mport: Master port implementing the inbound message unit - * @mbox: Inbound mailbox number - * - * Gets the next available inbound message from the inbound message queue. - * A pointer to the message is returned on success or NULL on failure. - */ -static void *fsl_get_inb_message(struct rio_mport *mport, int mbox) -{ - struct rio_priv *priv = mport->priv; - u32 phys_buf, virt_buf; - void *buf = NULL; - int buf_idx; - - phys_buf = in_be32(&priv->msg_regs->ifqdpar); - - /* If no more messages, then bail out */ - if (phys_buf == in_be32(&priv->msg_regs->ifqepar)) - goto out2; - - virt_buf = (u32) priv->msg_rx_ring.virt + (phys_buf - - priv->msg_rx_ring.phys); - buf_idx = (phys_buf - priv->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE; - buf = priv->msg_rx_ring.virt_buffer[buf_idx]; - - if (!buf) { - printk(KERN_ERR - "RIO: inbound message copy failed, no buffers\n"); - goto out1; - } - - /* Copy max message size, caller is expected to allocate that big */ - memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE); - - /* Clear the available buffer */ - priv->msg_rx_ring.virt_buffer[buf_idx] = NULL; - - out1: - setbits32(&priv->msg_regs->imr, RIO_MSG_IMR_MI); - - out2: - return buf; -} - -/** - * fsl_rio_dbell_handler - MPC85xx doorbell interrupt handler - * @irq: Linux interrupt number - * @dev_instance: Pointer to interrupt-specific data - * - * Handles doorbell interrupts. Parses a list of registered - * doorbell event handlers and executes a matching event handler. - */ -static irqreturn_t -fsl_rio_dbell_handler(int irq, void *dev_instance) -{ - int dsr; - struct rio_mport *port = (struct rio_mport *)dev_instance; - struct rio_priv *priv = port->priv; - - dsr = in_be32(&priv->msg_regs->dsr); - - if (dsr & DOORBELL_DSR_TE) { - pr_info("RIO: doorbell reception error\n"); - out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_TE); - goto out; - } - - if (dsr & DOORBELL_DSR_QFI) { - pr_info("RIO: doorbell queue full\n"); - out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_QFI); - } - - /* XXX Need to check/dispatch until queue empty */ - if (dsr & DOORBELL_DSR_DIQI) { - u32 dmsg = - (u32) priv->dbell_ring.virt + - (in_be32(&priv->msg_regs->dqdpar) & 0xfff); - struct rio_dbell *dbell; - int found = 0; - - pr_debug - ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n", - DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); - - list_for_each_entry(dbell, &port->dbells, node) { - if ((dbell->res->start <= DBELL_INF(dmsg)) && - (dbell->res->end >= DBELL_INF(dmsg))) { - found = 1; - break; - } - } - if (found) { - dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg), - DBELL_INF(dmsg)); - } else { - pr_debug - ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n", - DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); - } - setbits32(&priv->msg_regs->dmr, DOORBELL_DMR_DI); - out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_DIQI); - } - - out: - return IRQ_HANDLED; -} - -/** - * fsl_rio_doorbell_init - MPC85xx doorbell interface init - * @mport: Master port implementing the inbound doorbell unit - * - * Initializes doorbell unit hardware and inbound DMA buffer - * ring. Called from fsl_rio_setup(). Returns %0 on success - * or %-ENOMEM on failure. - */ -static int fsl_rio_doorbell_init(struct rio_mport *mport) -{ - struct rio_priv *priv = mport->priv; - int rc = 0; - - /* Map outbound doorbell window immediately after maintenance window */ - priv->dbell_win = ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE, - RIO_DBELL_WIN_SIZE); - if (!priv->dbell_win) { - printk(KERN_ERR - "RIO: unable to map outbound doorbell window\n"); - rc = -ENOMEM; - goto out; - } - - /* Initialize inbound doorbells */ - priv->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 * - DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL); - if (!priv->dbell_ring.virt) { - printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n"); - rc = -ENOMEM; - iounmap(priv->dbell_win); - goto out; - } - - /* Point dequeue/enqueue pointers at first entry in ring */ - out_be32(&priv->msg_regs->dqdpar, (u32) priv->dbell_ring.phys); - out_be32(&priv->msg_regs->dqepar, (u32) priv->dbell_ring.phys); - - /* Clear interrupt status */ - out_be32(&priv->msg_regs->dsr, 0x00000091); - - /* Hook up doorbell handler */ - rc = request_irq(IRQ_RIO_BELL(mport), fsl_rio_dbell_handler, 0, - "dbell_rx", (void *)mport); - if (rc < 0) { - iounmap(priv->dbell_win); - dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE, - priv->dbell_ring.virt, priv->dbell_ring.phys); - printk(KERN_ERR - "MPC85xx RIO: unable to request inbound doorbell irq"); - goto out; - } - - /* Configure doorbells for snooping, 512 entries, and enable */ - out_be32(&priv->msg_regs->dmr, 0x00108161); - - out: - return rc; -} - -static void port_error_handler(struct rio_mport *port, int offset) +void fsl_rio_port_error_handler(int offset) { /*XXX: Error recovery is not implemented, we just clear errors */ out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0); @@ -1098,263 +279,6 @@ static void port_error_handler(struct rio_mport *port, int offset) out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR); } } - -static void msg_unit_error_handler(struct rio_mport *port) -{ - struct rio_priv *priv = port->priv; - - /*XXX: Error recovery is not implemented, we just clear errors */ - out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0); - - out_be32((u32 *)(rio_regs_win + RIO_IM0SR), IMSR_CLEAR); - out_be32((u32 *)(rio_regs_win + RIO_IM1SR), IMSR_CLEAR); - out_be32((u32 *)(rio_regs_win + RIO_OM0SR), OMSR_CLEAR); - out_be32((u32 *)(rio_regs_win + RIO_OM1SR), OMSR_CLEAR); - - out_be32(&priv->msg_regs->odsr, ODSR_CLEAR); - out_be32(&priv->msg_regs->dsr, IDSR_CLEAR); - - out_be32(&priv->msg_regs->pwsr, IPWSR_CLEAR); -} - -/** - * fsl_rio_port_write_handler - MPC85xx port write interrupt handler - * @irq: Linux interrupt number - * @dev_instance: Pointer to interrupt-specific data - * - * Handles port write interrupts. Parses a list of registered - * port write event handlers and executes a matching event handler. - */ -static irqreturn_t -fsl_rio_port_write_handler(int irq, void *dev_instance) -{ - u32 ipwmr, ipwsr; - struct rio_mport *port = (struct rio_mport *)dev_instance; - struct rio_priv *priv = port->priv; - u32 epwisr, tmp; - - epwisr = in_be32(priv->regs_win + RIO_EPWISR); - if (!(epwisr & RIO_EPWISR_PW)) - goto pw_done; - - ipwmr = in_be32(&priv->msg_regs->pwmr); - ipwsr = in_be32(&priv->msg_regs->pwsr); - -#ifdef DEBUG_PW - pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr); - if (ipwsr & RIO_IPWSR_QF) - pr_debug(" QF"); - if (ipwsr & RIO_IPWSR_TE) - pr_debug(" TE"); - if (ipwsr & RIO_IPWSR_QFI) - pr_debug(" QFI"); - if (ipwsr & RIO_IPWSR_PWD) - pr_debug(" PWD"); - if (ipwsr & RIO_IPWSR_PWB) - pr_debug(" PWB"); - pr_debug(" )\n"); -#endif - /* Schedule deferred processing if PW was received */ - if (ipwsr & RIO_IPWSR_QFI) { - /* Save PW message (if there is room in FIFO), - * otherwise discard it. - */ - if (kfifo_avail(&priv->pw_fifo) >= RIO_PW_MSG_SIZE) { - priv->port_write_msg.msg_count++; - kfifo_in(&priv->pw_fifo, priv->port_write_msg.virt, - RIO_PW_MSG_SIZE); - } else { - priv->port_write_msg.discard_count++; - pr_debug("RIO: ISR Discarded Port-Write Msg(s) (%d)\n", - priv->port_write_msg.discard_count); - } - /* Clear interrupt and issue Clear Queue command. This allows - * another port-write to be received. - */ - out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_QFI); - out_be32(&priv->msg_regs->pwmr, ipwmr | RIO_IPWMR_CQ); - - schedule_work(&priv->pw_work); - } - - if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) { - priv->port_write_msg.err_count++; - pr_debug("RIO: Port-Write Transaction Err (%d)\n", - priv->port_write_msg.err_count); - /* Clear Transaction Error: port-write controller should be - * disabled when clearing this error - */ - out_be32(&priv->msg_regs->pwmr, ipwmr & ~RIO_IPWMR_PWE); - out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_TE); - out_be32(&priv->msg_regs->pwmr, ipwmr); - } - - if (ipwsr & RIO_IPWSR_PWD) { - priv->port_write_msg.discard_count++; - pr_debug("RIO: Port Discarded Port-Write Msg(s) (%d)\n", - priv->port_write_msg.discard_count); - out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_PWD); - } - -pw_done: - if (epwisr & RIO_EPWISR_PINT1) { - tmp = in_be32(priv->regs_win + RIO_LTLEDCSR); - pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp); - port_error_handler(port, 0); - } - - if (epwisr & RIO_EPWISR_PINT2) { - tmp = in_be32(priv->regs_win + RIO_LTLEDCSR); - pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp); - port_error_handler(port, 1); - } - - if (epwisr & RIO_EPWISR_MU) { - tmp = in_be32(priv->regs_win + RIO_LTLEDCSR); - pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp); - msg_unit_error_handler(port); - } - - return IRQ_HANDLED; -} - -static void fsl_pw_dpc(struct work_struct *work) -{ - struct rio_priv *priv = container_of(work, struct rio_priv, pw_work); - unsigned long flags; - u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)]; - - /* - * Process port-write messages - */ - spin_lock_irqsave(&priv->pw_fifo_lock, flags); - while (kfifo_out(&priv->pw_fifo, (unsigned char *)msg_buffer, - RIO_PW_MSG_SIZE)) { - /* Process one message */ - spin_unlock_irqrestore(&priv->pw_fifo_lock, flags); -#ifdef DEBUG_PW - { - u32 i; - pr_debug("%s : Port-Write Message:", __func__); - for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); i++) { - if ((i%4) == 0) - pr_debug("\n0x%02x: 0x%08x", i*4, - msg_buffer[i]); - else - pr_debug(" 0x%08x", msg_buffer[i]); - } - pr_debug("\n"); - } -#endif - /* Pass the port-write message to RIO core for processing */ - rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer); - spin_lock_irqsave(&priv->pw_fifo_lock, flags); - } - spin_unlock_irqrestore(&priv->pw_fifo_lock, flags); -} - -/** - * fsl_rio_pw_enable - enable/disable port-write interface init - * @mport: Master port implementing the port write unit - * @enable: 1=enable; 0=disable port-write message handling - */ -static int fsl_rio_pw_enable(struct rio_mport *mport, int enable) -{ - struct rio_priv *priv = mport->priv; - u32 rval; - - rval = in_be32(&priv->msg_regs->pwmr); - - if (enable) - rval |= RIO_IPWMR_PWE; - else - rval &= ~RIO_IPWMR_PWE; - - out_be32(&priv->msg_regs->pwmr, rval); - - return 0; -} - -/** - * fsl_rio_port_write_init - MPC85xx port write interface init - * @mport: Master port implementing the port write unit - * - * Initializes port write unit hardware and DMA buffer - * ring. Called from fsl_rio_setup(). Returns %0 on success - * or %-ENOMEM on failure. - */ -static int fsl_rio_port_write_init(struct rio_mport *mport) -{ - struct rio_priv *priv = mport->priv; - int rc = 0; - - /* Following configurations require a disabled port write controller */ - out_be32(&priv->msg_regs->pwmr, - in_be32(&priv->msg_regs->pwmr) & ~RIO_IPWMR_PWE); - - /* Initialize port write */ - priv->port_write_msg.virt = dma_alloc_coherent(priv->dev, - RIO_PW_MSG_SIZE, - &priv->port_write_msg.phys, GFP_KERNEL); - if (!priv->port_write_msg.virt) { - pr_err("RIO: unable allocate port write queue\n"); - return -ENOMEM; - } - - priv->port_write_msg.err_count = 0; - priv->port_write_msg.discard_count = 0; - - /* Point dequeue/enqueue pointers at first entry */ - out_be32(&priv->msg_regs->epwqbar, 0); - out_be32(&priv->msg_regs->pwqbar, (u32) priv->port_write_msg.phys); - - pr_debug("EIPWQBAR: 0x%08x IPWQBAR: 0x%08x\n", - in_be32(&priv->msg_regs->epwqbar), - in_be32(&priv->msg_regs->pwqbar)); - - /* Clear interrupt status IPWSR */ - out_be32(&priv->msg_regs->pwsr, - (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD)); - - /* Configure port write contoller for snooping enable all reporting, - clear queue full */ - out_be32(&priv->msg_regs->pwmr, - RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ); - - - /* Hook up port-write handler */ - rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler, - IRQF_SHARED, "port-write", (void *)mport); - if (rc < 0) { - pr_err("MPC85xx RIO: unable to request inbound doorbell irq"); - goto err_out; - } - /* Enable Error Interrupt */ - out_be32((u32 *)(rio_regs_win + RIO_LTLEECSR), LTLEECSR_ENABLE_ALL); - - INIT_WORK(&priv->pw_work, fsl_pw_dpc); - spin_lock_init(&priv->pw_fifo_lock); - if (kfifo_alloc(&priv->pw_fifo, RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) { - pr_err("FIFO allocation failed\n"); - rc = -ENOMEM; - goto err_out_irq; - } - - pr_debug("IPWMR: 0x%08x IPWSR: 0x%08x\n", - in_be32(&priv->msg_regs->pwmr), - in_be32(&priv->msg_regs->pwsr)); - - return rc; - -err_out_irq: - free_irq(IRQ_RIO_PW(mport), (void *)mport); -err_out: - dma_free_coherent(priv->dev, RIO_PW_MSG_SIZE, - priv->port_write_msg.virt, - priv->port_write_msg.phys); - return rc; -} - static inline void fsl_rio_info(struct device *dev, u32 ccsr) { const char *str; @@ -1411,16 +335,21 @@ int fsl_rio_setup(struct platform_device *dev) struct rio_mport *port; struct rio_priv *priv; int rc = 0; - const u32 *dt_range, *cell; - struct resource regs; + const u32 *dt_range, *cell, *port_index; + u32 active_ports = 0; + struct resource regs, rmu_regs; + struct device_node *np, *rmu_node; int rlen; u32 ccsr; - u64 law_start, law_size; + u64 range_start, range_size; int paw, aw, sw; + u32 i; + static int tmp; + struct device_node *rmu_np[MAX_MSG_UNIT_NUM] = {NULL}; if (!dev->dev.of_node) { dev_err(&dev->dev, "Device OF-Node is NULL"); - return -EFAULT; + return -ENODEV; } rc = of_address_to_resource(dev->dev.of_node, 0, ®s); @@ -1429,37 +358,17 @@ int fsl_rio_setup(struct platform_device *dev) dev->dev.of_node->full_name); return -EFAULT; } - dev_info(&dev->dev, "Of-device full name %s\n", dev->dev.of_node->full_name); + dev_info(&dev->dev, "Of-device full name %s\n", + dev->dev.of_node->full_name); dev_info(&dev->dev, "Regs: %pR\n", ®s); - dt_range = of_get_property(dev->dev.of_node, "ranges", &rlen); - if (!dt_range) { - dev_err(&dev->dev, "Can't get %s property 'ranges'\n", - dev->dev.of_node->full_name); - return -EFAULT; + rio_regs_win = ioremap(regs.start, resource_size(®s)); + if (!rio_regs_win) { + dev_err(&dev->dev, "Unable to map rio register window\n"); + rc = -ENOMEM; + goto err_rio_regs; } - /* Get node address wide */ - cell = of_get_property(dev->dev.of_node, "#address-cells", NULL); - if (cell) - aw = *cell; - else - aw = of_n_addr_cells(dev->dev.of_node); - /* Get node size wide */ - cell = of_get_property(dev->dev.of_node, "#size-cells", NULL); - if (cell) - sw = *cell; - else - sw = of_n_size_cells(dev->dev.of_node); - /* Get parent address wide wide */ - paw = of_n_addr_cells(dev->dev.of_node); - - law_start = of_read_number(dt_range + aw, paw); - law_size = of_read_number(dt_range + aw + paw, sw); - - dev_info(&dev->dev, "LAW start 0x%016llx, size 0x%016llx.\n", - law_start, law_size); - ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL); if (!ops) { rc = -ENOMEM; @@ -1479,143 +388,257 @@ int fsl_rio_setup(struct platform_device *dev) ops->add_inb_buffer = fsl_add_inb_buffer; ops->get_inb_message = fsl_get_inb_message; - port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL); - if (!port) { + rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0); + if (!rmu_node) + goto err_rmu; + rc = of_address_to_resource(rmu_node, 0, &rmu_regs); + if (rc) { + dev_err(&dev->dev, "Can't get %s property 'reg'\n", + rmu_node->full_name); + goto err_rmu; + } + rmu_regs_win = ioremap(rmu_regs.start, resource_size(&rmu_regs)); + if (!rmu_regs_win) { + dev_err(&dev->dev, "Unable to map rmu register window\n"); rc = -ENOMEM; - goto err_port; + goto err_rmu; + } + for_each_compatible_node(np, NULL, "fsl,srio-msg-unit") { + rmu_np[tmp] = np; + tmp++; } - port->index = 0; - priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL); - if (!priv) { - printk(KERN_ERR "Can't alloc memory for 'priv'\n"); + /*set up doobell node*/ + np = of_find_compatible_node(NULL, NULL, "fsl,srio-dbell-unit"); + if (!np) { + rc = -ENODEV; + goto err_dbell; + } + dbell = kzalloc(sizeof(struct fsl_rio_dbell), GFP_KERNEL); + if (!(dbell)) { + dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_dbell'\n"); rc = -ENOMEM; - goto err_priv; + goto err_dbell; } + dbell->dev = &dev->dev; + dbell->bellirq = irq_of_parse_and_map(np, 1); + dev_info(&dev->dev, "bellirq: %d\n", dbell->bellirq); - INIT_LIST_HEAD(&port->dbells); - port->iores.start = law_start; - port->iores.end = law_start + law_size - 1; - port->iores.flags = IORESOURCE_MEM; - port->iores.name = "rio_io_win"; - - if (request_resource(&iomem_resource, &port->iores) < 0) { - dev_err(&dev->dev, "RIO: Error requesting master port region" - " 0x%016llx-0x%016llx\n", - (u64)port->iores.start, (u64)port->iores.end); - rc = -ENOMEM; - goto err_res; + aw = of_n_addr_cells(np); + dt_range = of_get_property(np, "reg", &rlen); + if (!dt_range) { + pr_err("%s: unable to find 'reg' property\n", + np->full_name); + rc = -ENOMEM; + goto err_pw; } + range_start = of_read_number(dt_range, aw); + dbell->dbell_regs = (struct rio_dbell_regs *)(rmu_regs_win + + (u32)range_start); - priv->pwirq = irq_of_parse_and_map(dev->dev.of_node, 0); - priv->bellirq = irq_of_parse_and_map(dev->dev.of_node, 2); - priv->txirq = irq_of_parse_and_map(dev->dev.of_node, 3); - priv->rxirq = irq_of_parse_and_map(dev->dev.of_node, 4); - dev_info(&dev->dev, "pwirq: %d, bellirq: %d, txirq: %d, rxirq %d\n", - priv->pwirq, priv->bellirq, priv->txirq, priv->rxirq); - - rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); - rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0); - rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); - strcpy(port->name, "RIO0 mport"); - - priv->dev = &dev->dev; - - port->ops = ops; - port->priv = priv; - port->phys_efptr = 0x100; - - priv->regs_win = ioremap(regs.start, resource_size(®s)); - rio_regs_win = priv->regs_win; - - /* Probe the master port phy type */ - ccsr = in_be32(priv->regs_win + RIO_CCSR); - port->phy_type = (ccsr & 1) ? RIO_PHY_SERIAL : RIO_PHY_PARALLEL; - dev_info(&dev->dev, "RapidIO PHY type: %s\n", - (port->phy_type == RIO_PHY_PARALLEL) ? "parallel" : - ((port->phy_type == RIO_PHY_SERIAL) ? "serial" : - "unknown")); - /* Checking the port training status */ - if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) { - dev_err(&dev->dev, "Port is not ready. " - "Try to restart connection...\n"); - switch (port->phy_type) { - case RIO_PHY_SERIAL: + /*set up port write node*/ + np = of_find_compatible_node(NULL, NULL, "fsl,srio-port-write-unit"); + if (!np) { + rc = -ENODEV; + goto err_pw; + } + pw = kzalloc(sizeof(struct fsl_rio_pw), GFP_KERNEL); + if (!(pw)) { + dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_pw'\n"); + rc = -ENOMEM; + goto err_pw; + } + pw->dev = &dev->dev; + pw->pwirq = irq_of_parse_and_map(np, 0); + dev_info(&dev->dev, "pwirq: %d\n", pw->pwirq); + aw = of_n_addr_cells(np); + dt_range = of_get_property(np, "reg", &rlen); + if (!dt_range) { + pr_err("%s: unable to find 'reg' property\n", + np->full_name); + rc = -ENOMEM; + goto err; + } + range_start = of_read_number(dt_range, aw); + pw->pw_regs = (struct rio_pw_regs *)(rmu_regs_win + (u32)range_start); + + /*set up ports node*/ + for_each_child_of_node(dev->dev.of_node, np) { + port_index = of_get_property(np, "cell-index", NULL); + if (!port_index) { + dev_err(&dev->dev, "Can't get %s property 'cell-index'\n", + np->full_name); + continue; + } + + dt_range = of_get_property(np, "ranges", &rlen); + if (!dt_range) { + dev_err(&dev->dev, "Can't get %s property 'ranges'\n", + np->full_name); + continue; + } + + /* Get node address wide */ + cell = of_get_property(np, "#address-cells", NULL); + if (cell) + aw = *cell; + else + aw = of_n_addr_cells(np); + /* Get node size wide */ + cell = of_get_property(np, "#size-cells", NULL); + if (cell) + sw = *cell; + else + sw = of_n_size_cells(np); + /* Get parent address wide wide */ + paw = of_n_addr_cells(np); + range_start = of_read_number(dt_range + aw, paw); + range_size = of_read_number(dt_range + aw + paw, sw); + + dev_info(&dev->dev, "%s: LAW start 0x%016llx, size 0x%016llx.\n", + np->full_name, range_start, range_size); + + port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL); + if (!port) + continue; + + i = *port_index - 1; + port->index = (unsigned char)i; + + priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL); + if (!priv) { + dev_err(&dev->dev, "Can't alloc memory for 'priv'\n"); + kfree(port); + continue; + } + + INIT_LIST_HEAD(&port->dbells); + port->iores.start = range_start; + port->iores.end = port->iores.start + range_size - 1; + port->iores.flags = IORESOURCE_MEM; + port->iores.name = "rio_io_win"; + + if (request_resource(&iomem_resource, &port->iores) < 0) { + dev_err(&dev->dev, "RIO: Error requesting master port region" + " 0x%016llx-0x%016llx\n", + (u64)port->iores.start, (u64)port->iores.end); + kfree(priv); + kfree(port); + continue; + } + sprintf(port->name, "RIO mport %d", i); + + priv->dev = &dev->dev; + port->ops = ops; + port->priv = priv; + port->phys_efptr = 0x100; + priv->regs_win = rio_regs_win; + + /* Probe the master port phy type */ + ccsr = in_be32(priv->regs_win + RIO_CCSR + i*0x20); + port->phy_type = (ccsr & 1) ? RIO_PHY_SERIAL : RIO_PHY_PARALLEL; + if (port->phy_type == RIO_PHY_PARALLEL) { + dev_err(&dev->dev, "RIO: Parallel PHY type, unsupported port type!\n"); + release_resource(&port->iores); + kfree(priv); + kfree(port); + continue; + } + dev_info(&dev->dev, "RapidIO PHY type: Serial\n"); + /* Checking the port training status */ + if (in_be32((priv->regs_win + RIO_ESCSR + i*0x20)) & 1) { + dev_err(&dev->dev, "Port %d is not ready. " + "Try to restart connection...\n", i); /* Disable ports */ - out_be32(priv->regs_win + RIO_CCSR, 0); + out_be32(priv->regs_win + + RIO_CCSR + i*0x20, 0); /* Set 1x lane */ - setbits32(priv->regs_win + RIO_CCSR, 0x02000000); + setbits32(priv->regs_win + + RIO_CCSR + i*0x20, 0x02000000); /* Enable ports */ - setbits32(priv->regs_win + RIO_CCSR, 0x00600000); - break; - case RIO_PHY_PARALLEL: - /* Disable ports */ - out_be32(priv->regs_win + RIO_CCSR, 0x22000000); - /* Enable ports */ - out_be32(priv->regs_win + RIO_CCSR, 0x44000000); - break; - } - msleep(100); - if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) { - dev_err(&dev->dev, "Port restart failed.\n"); - rc = -ENOLINK; - goto err; + setbits32(priv->regs_win + + RIO_CCSR + i*0x20, 0x00600000); + msleep(100); + if (in_be32((priv->regs_win + + RIO_ESCSR + i*0x20)) & 1) { + dev_err(&dev->dev, + "Port %d restart failed.\n", i); + release_resource(&port->iores); + kfree(priv); + kfree(port); + continue; + } + dev_info(&dev->dev, "Port %d restart success!\n", i); } - dev_info(&dev->dev, "Port restart success!\n"); - } - fsl_rio_info(&dev->dev, ccsr); + fsl_rio_info(&dev->dev, ccsr); - port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR)) + port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR)) & RIO_PEF_CTLS) >> 4; - dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n", - port->sys_size ? 65536 : 256); + dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n", + port->sys_size ? 65536 : 256); + + if (rio_register_mport(port)) { + release_resource(&port->iores); + kfree(priv); + kfree(port); + continue; + } + if (port->host_deviceid >= 0) + out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST | + RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED); + else + out_be32(priv->regs_win + RIO_GCCSR, + RIO_PORT_GEN_MASTER); + + priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win + + ((i == 0) ? RIO_ATMU_REGS_PORT1_OFFSET : + RIO_ATMU_REGS_PORT2_OFFSET)); - if (rio_register_mport(port)) + priv->maint_atmu_regs = priv->atmu_regs + 1; + + /* Set to receive any dist ID for serial RapidIO controller. */ + if (port->phy_type == RIO_PHY_SERIAL) + out_be32((priv->regs_win + + RIO_ISR_AACR + i*0x80), RIO_ISR_AACR_AA); + + /* Configure maintenance transaction window */ + out_be32(&priv->maint_atmu_regs->rowbar, + port->iores.start >> 12); + out_be32(&priv->maint_atmu_regs->rowar, + 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1)); + + priv->maint_win = ioremap(port->iores.start, + RIO_MAINT_WIN_SIZE); + + rio_law_start = range_start; + + fsl_rio_setup_rmu(port, rmu_np[i]); + + dbell->mport[i] = port; + + active_ports++; + } + + if (!active_ports) { + rc = -ENOLINK; goto err; + } - if (port->host_deviceid >= 0) - out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST | - RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED); - else - out_be32(priv->regs_win + RIO_GCCSR, 0x00000000); - - priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win - + RIO_ATMU_REGS_OFFSET); - priv->maint_atmu_regs = priv->atmu_regs + 1; - priv->dbell_atmu_regs = priv->atmu_regs + 2; - priv->msg_regs = (struct rio_msg_regs *)(priv->regs_win + - ((port->phy_type == RIO_PHY_SERIAL) ? - RIO_S_MSG_REGS_OFFSET : RIO_P_MSG_REGS_OFFSET)); - - /* Set to receive any dist ID for serial RapidIO controller. */ - if (port->phy_type == RIO_PHY_SERIAL) - out_be32((priv->regs_win + RIO_ISR_AACR), RIO_ISR_AACR_AA); - - /* Configure maintenance transaction window */ - out_be32(&priv->maint_atmu_regs->rowbar, law_start >> 12); - out_be32(&priv->maint_atmu_regs->rowar, - 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1)); - - priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE); - - /* Configure outbound doorbell window */ - out_be32(&priv->dbell_atmu_regs->rowbar, - (law_start + RIO_MAINT_WIN_SIZE) >> 12); - out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b); /* 4k */ - fsl_rio_doorbell_init(port); - fsl_rio_port_write_init(port); + fsl_rio_doorbell_init(dbell); + fsl_rio_port_write_init(pw); return 0; err: - iounmap(priv->regs_win); - release_resource(&port->iores); -err_res: - kfree(priv); -err_priv: - kfree(port); -err_port: + kfree(pw); +err_pw: + kfree(dbell); +err_dbell: + iounmap(rmu_regs_win); +err_rmu: kfree(ops); err_ops: + iounmap(rio_regs_win); +err_rio_regs: return rc; } @@ -1631,7 +654,7 @@ static int __devinit fsl_of_rio_rpn_probe(struct platform_device *dev) static const struct of_device_id fsl_of_rio_rpn_ids[] = { { - .compatible = "fsl,rapidio-delta", + .compatible = "fsl,srio", }, {}, }; diff --git a/arch/powerpc/sysdev/fsl_rio.h b/arch/powerpc/sysdev/fsl_rio.h new file mode 100644 index 000000000000..ae8e27405a0d --- /dev/null +++ b/arch/powerpc/sysdev/fsl_rio.h @@ -0,0 +1,135 @@ +/* + * Freescale MPC85xx/MPC86xx RapidIO support + * + * Copyright 2009 Sysgo AG + * Thomas Moll <thomas.moll@sysgo.com> + * - fixed maintenance access routines, check for aligned access + * + * Copyright 2009 Integrated Device Technology, Inc. + * Alex Bounine <alexandre.bounine@idt.com> + * - Added Port-Write message handling + * - Added Machine Check exception handling + * + * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc. + * Zhang Wei <wei.zhang@freescale.com> + * Lian Minghuan-B31939 <Minghuan.Lian@freescale.com> + * Liu Gang <Gang.Liu@freescale.com> + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter <mporter@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __FSL_RIO_H +#define __FSL_RIO_H + +#include <linux/rio.h> +#include <linux/rio_drv.h> +#include <linux/kfifo.h> + +#define RIO_REGS_WIN(mport) (((struct rio_priv *)(mport->priv))->regs_win) + +#define RIO_MAINT_WIN_SIZE 0x400000 +#define RIO_LTLEDCSR 0x0608 + +#define DOORBELL_ROWAR_EN 0x80000000 +#define DOORBELL_ROWAR_TFLOWLV 0x08000000 /* highest priority level */ +#define DOORBELL_ROWAR_PCI 0x02000000 /* PCI window */ +#define DOORBELL_ROWAR_NREAD 0x00040000 /* NREAD */ +#define DOORBELL_ROWAR_MAINTRD 0x00070000 /* maintenance read */ +#define DOORBELL_ROWAR_RES 0x00002000 /* wrtpy: reserverd */ +#define DOORBELL_ROWAR_MAINTWD 0x00007000 +#define DOORBELL_ROWAR_SIZE 0x0000000b /* window size is 4k */ + +#define RIO_ATMU_REGS_PORT1_OFFSET 0x10c00 +#define RIO_ATMU_REGS_PORT2_OFFSET 0x10e00 +#define RIO_S_DBELL_REGS_OFFSET 0x13400 +#define RIO_S_PW_REGS_OFFSET 0x134e0 +#define RIO_ATMU_REGS_DBELL_OFFSET 0x10C40 + +#define MAX_MSG_UNIT_NUM 2 +#define MAX_PORT_NUM 4 + +struct rio_atmu_regs { + u32 rowtar; + u32 rowtear; + u32 rowbar; + u32 pad1; + u32 rowar; + u32 pad2[3]; +}; + +struct rio_dbell_ring { + void *virt; + dma_addr_t phys; +}; + +struct rio_port_write_msg { + void *virt; + dma_addr_t phys; + u32 msg_count; + u32 err_count; + u32 discard_count; +}; + +struct fsl_rio_dbell { + struct rio_mport *mport[MAX_PORT_NUM]; + struct device *dev; + struct rio_dbell_regs __iomem *dbell_regs; + struct rio_dbell_ring dbell_ring; + int bellirq; +}; + +struct fsl_rio_pw { + struct device *dev; + struct rio_pw_regs __iomem *pw_regs; + struct rio_port_write_msg port_write_msg; + int pwirq; + struct work_struct pw_work; + struct kfifo pw_fifo; + spinlock_t pw_fifo_lock; +}; + +struct rio_priv { + struct device *dev; + void __iomem *regs_win; + struct rio_atmu_regs __iomem *atmu_regs; + struct rio_atmu_regs __iomem *maint_atmu_regs; + void __iomem *maint_win; + void *rmm_handle; /* RapidIO message manager(unit) Handle */ +}; + +extern void __iomem *rio_regs_win; +extern void __iomem *rmu_regs_win; + +extern resource_size_t rio_law_start; + +extern struct fsl_rio_dbell *dbell; +extern struct fsl_rio_pw *pw; + +extern int fsl_rio_setup_rmu(struct rio_mport *mport, + struct device_node *node); +extern int fsl_rio_port_write_init(struct fsl_rio_pw *pw); +extern int fsl_rio_pw_enable(struct rio_mport *mport, int enable); +extern void fsl_rio_port_error_handler(int offset); +extern int fsl_rio_doorbell_init(struct fsl_rio_dbell *dbell); + +extern int fsl_rio_doorbell_send(struct rio_mport *mport, + int index, u16 destid, u16 data); +extern int fsl_add_outb_message(struct rio_mport *mport, + struct rio_dev *rdev, + int mbox, void *buffer, size_t len); +extern int fsl_open_outb_mbox(struct rio_mport *mport, + void *dev_id, int mbox, int entries); +extern void fsl_close_outb_mbox(struct rio_mport *mport, int mbox); +extern int fsl_open_inb_mbox(struct rio_mport *mport, + void *dev_id, int mbox, int entries); +extern void fsl_close_inb_mbox(struct rio_mport *mport, int mbox); +extern int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf); +extern void *fsl_get_inb_message(struct rio_mport *mport, int mbox); + +#endif diff --git a/arch/powerpc/sysdev/fsl_rmu.c b/arch/powerpc/sysdev/fsl_rmu.c new file mode 100644 index 000000000000..15485789e9db --- /dev/null +++ b/arch/powerpc/sysdev/fsl_rmu.c @@ -0,0 +1,1104 @@ +/* + * Freescale MPC85xx/MPC86xx RapidIO RMU support + * + * Copyright 2009 Sysgo AG + * Thomas Moll <thomas.moll@sysgo.com> + * - fixed maintenance access routines, check for aligned access + * + * Copyright 2009 Integrated Device Technology, Inc. + * Alex Bounine <alexandre.bounine@idt.com> + * - Added Port-Write message handling + * - Added Machine Check exception handling + * + * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc. + * Zhang Wei <wei.zhang@freescale.com> + * Lian Minghuan-B31939 <Minghuan.Lian@freescale.com> + * Liu Gang <Gang.Liu@freescale.com> + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter <mporter@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/types.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/of_platform.h> +#include <linux/slab.h> + +#include "fsl_rio.h" + +#define GET_RMM_HANDLE(mport) \ + (((struct rio_priv *)(mport->priv))->rmm_handle) + +/* RapidIO definition irq, which read from OF-tree */ +#define IRQ_RIO_PW(m) (((struct fsl_rio_pw *)(m))->pwirq) +#define IRQ_RIO_BELL(m) (((struct fsl_rio_dbell *)(m))->bellirq) +#define IRQ_RIO_TX(m) (((struct fsl_rmu *)(GET_RMM_HANDLE(m)))->txirq) +#define IRQ_RIO_RX(m) (((struct fsl_rmu *)(GET_RMM_HANDLE(m)))->rxirq) + +#define RIO_MIN_TX_RING_SIZE 2 +#define RIO_MAX_TX_RING_SIZE 2048 +#define RIO_MIN_RX_RING_SIZE 2 +#define RIO_MAX_RX_RING_SIZE 2048 + +#define RIO_IPWMR_SEN 0x00100000 +#define RIO_IPWMR_QFIE 0x00000100 +#define RIO_IPWMR_EIE 0x00000020 +#define RIO_IPWMR_CQ 0x00000002 +#define RIO_IPWMR_PWE 0x00000001 + +#define RIO_IPWSR_QF 0x00100000 +#define RIO_IPWSR_TE 0x00000080 +#define RIO_IPWSR_QFI 0x00000010 +#define RIO_IPWSR_PWD 0x00000008 +#define RIO_IPWSR_PWB 0x00000004 + +#define RIO_EPWISR 0x10010 +/* EPWISR Error match value */ +#define RIO_EPWISR_PINT1 0x80000000 +#define RIO_EPWISR_PINT2 0x40000000 +#define RIO_EPWISR_MU 0x00000002 +#define RIO_EPWISR_PW 0x00000001 + +#define IPWSR_CLEAR 0x98 +#define OMSR_CLEAR 0x1cb3 +#define IMSR_CLEAR 0x491 +#define IDSR_CLEAR 0x91 +#define ODSR_CLEAR 0x1c00 +#define LTLEECSR_ENABLE_ALL 0xFFC000FC +#define RIO_LTLEECSR 0x060c + +#define RIO_IM0SR 0x64 +#define RIO_IM1SR 0x164 +#define RIO_OM0SR 0x4 +#define RIO_OM1SR 0x104 + +#define RIO_DBELL_WIN_SIZE 0x1000 + +#define RIO_MSG_OMR_MUI 0x00000002 +#define RIO_MSG_OSR_TE 0x00000080 +#define RIO_MSG_OSR_QOI 0x00000020 +#define RIO_MSG_OSR_QFI 0x00000010 +#define RIO_MSG_OSR_MUB 0x00000004 +#define RIO_MSG_OSR_EOMI 0x00000002 +#define RIO_MSG_OSR_QEI 0x00000001 + +#define RIO_MSG_IMR_MI 0x00000002 +#define RIO_MSG_ISR_TE 0x00000080 +#define RIO_MSG_ISR_QFI 0x00000010 +#define RIO_MSG_ISR_DIQI 0x00000001 + +#define RIO_MSG_DESC_SIZE 32 +#define RIO_MSG_BUFFER_SIZE 4096 + +#define DOORBELL_DMR_DI 0x00000002 +#define DOORBELL_DSR_TE 0x00000080 +#define DOORBELL_DSR_QFI 0x00000010 +#define DOORBELL_DSR_DIQI 0x00000001 +#define DOORBELL_TID_OFFSET 0x02 +#define DOORBELL_SID_OFFSET 0x04 +#define DOORBELL_INFO_OFFSET 0x06 + +#define DOORBELL_MESSAGE_SIZE 0x08 +#define DBELL_SID(x) (*(u16 *)(x + DOORBELL_SID_OFFSET)) +#define DBELL_TID(x) (*(u16 *)(x + DOORBELL_TID_OFFSET)) +#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET)) + +struct rio_msg_regs { + u32 omr; + u32 osr; + u32 pad1; + u32 odqdpar; + u32 pad2; + u32 osar; + u32 odpr; + u32 odatr; + u32 odcr; + u32 pad3; + u32 odqepar; + u32 pad4[13]; + u32 imr; + u32 isr; + u32 pad5; + u32 ifqdpar; + u32 pad6; + u32 ifqepar; +}; + +struct rio_dbell_regs { + u32 odmr; + u32 odsr; + u32 pad1[4]; + u32 oddpr; + u32 oddatr; + u32 pad2[3]; + u32 odretcr; + u32 pad3[12]; + u32 dmr; + u32 dsr; + u32 pad4; + u32 dqdpar; + u32 pad5; + u32 dqepar; +}; + +struct rio_pw_regs { + u32 pwmr; + u32 pwsr; + u32 epwqbar; + u32 pwqbar; +}; + + +struct rio_tx_desc { + u32 pad1; + u32 saddr; + u32 dport; + u32 dattr; + u32 pad2; + u32 pad3; + u32 dwcnt; + u32 pad4; +}; + +struct rio_msg_tx_ring { + void *virt; + dma_addr_t phys; + void *virt_buffer[RIO_MAX_TX_RING_SIZE]; + dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE]; + int tx_slot; + int size; + void *dev_id; +}; + +struct rio_msg_rx_ring { + void *virt; + dma_addr_t phys; + void *virt_buffer[RIO_MAX_RX_RING_SIZE]; + int rx_slot; + int size; + void *dev_id; +}; + +struct fsl_rmu { + struct rio_msg_regs __iomem *msg_regs; + struct rio_msg_tx_ring msg_tx_ring; + struct rio_msg_rx_ring msg_rx_ring; + int txirq; + int rxirq; +}; + +/** + * fsl_rio_tx_handler - MPC85xx outbound message interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * + * Handles outbound message interrupts. Executes a register outbound + * mailbox event handler and acks the interrupt occurrence. + */ +static irqreturn_t +fsl_rio_tx_handler(int irq, void *dev_instance) +{ + int osr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + struct fsl_rmu *rmu = GET_RMM_HANDLE(port); + + osr = in_be32(&rmu->msg_regs->osr); + + if (osr & RIO_MSG_OSR_TE) { + pr_info("RIO: outbound message transmission error\n"); + out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_TE); + goto out; + } + + if (osr & RIO_MSG_OSR_QOI) { + pr_info("RIO: outbound message queue overflow\n"); + out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_QOI); + goto out; + } + + if (osr & RIO_MSG_OSR_EOMI) { + u32 dqp = in_be32(&rmu->msg_regs->odqdpar); + int slot = (dqp - rmu->msg_tx_ring.phys) >> 5; + if (port->outb_msg[0].mcback != NULL) { + port->outb_msg[0].mcback(port, rmu->msg_tx_ring.dev_id, + -1, + slot); + } + /* Ack the end-of-message interrupt */ + out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_EOMI); + } + +out: + return IRQ_HANDLED; +} + +/** + * fsl_rio_rx_handler - MPC85xx inbound message interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * + * Handles inbound message interrupts. Executes a registered inbound + * mailbox event handler and acks the interrupt occurrence. + */ +static irqreturn_t +fsl_rio_rx_handler(int irq, void *dev_instance) +{ + int isr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + struct fsl_rmu *rmu = GET_RMM_HANDLE(port); + + isr = in_be32(&rmu->msg_regs->isr); + + if (isr & RIO_MSG_ISR_TE) { + pr_info("RIO: inbound message reception error\n"); + out_be32((void *)&rmu->msg_regs->isr, RIO_MSG_ISR_TE); + goto out; + } + + /* XXX Need to check/dispatch until queue empty */ + if (isr & RIO_MSG_ISR_DIQI) { + /* + * Can receive messages for any mailbox/letter to that + * mailbox destination. So, make the callback with an + * unknown/invalid mailbox number argument. + */ + if (port->inb_msg[0].mcback != NULL) + port->inb_msg[0].mcback(port, rmu->msg_rx_ring.dev_id, + -1, + -1); + + /* Ack the queueing interrupt */ + out_be32(&rmu->msg_regs->isr, RIO_MSG_ISR_DIQI); + } + +out: + return IRQ_HANDLED; +} + +/** + * fsl_rio_dbell_handler - MPC85xx doorbell interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * + * Handles doorbell interrupts. Parses a list of registered + * doorbell event handlers and executes a matching event handler. + */ +static irqreturn_t +fsl_rio_dbell_handler(int irq, void *dev_instance) +{ + int dsr; + struct fsl_rio_dbell *fsl_dbell = (struct fsl_rio_dbell *)dev_instance; + int i; + + dsr = in_be32(&fsl_dbell->dbell_regs->dsr); + + if (dsr & DOORBELL_DSR_TE) { + pr_info("RIO: doorbell reception error\n"); + out_be32(&fsl_dbell->dbell_regs->dsr, DOORBELL_DSR_TE); + goto out; + } + + if (dsr & DOORBELL_DSR_QFI) { + pr_info("RIO: doorbell queue full\n"); + out_be32(&fsl_dbell->dbell_regs->dsr, DOORBELL_DSR_QFI); + } + + /* XXX Need to check/dispatch until queue empty */ + if (dsr & DOORBELL_DSR_DIQI) { + u32 dmsg = + (u32) fsl_dbell->dbell_ring.virt + + (in_be32(&fsl_dbell->dbell_regs->dqdpar) & 0xfff); + struct rio_dbell *dbell; + int found = 0; + + pr_debug + ("RIO: processing doorbell," + " sid %2.2x tid %2.2x info %4.4x\n", + DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); + + for (i = 0; i < MAX_PORT_NUM; i++) { + if (fsl_dbell->mport[i]) { + list_for_each_entry(dbell, + &fsl_dbell->mport[i]->dbells, node) { + if ((dbell->res->start + <= DBELL_INF(dmsg)) + && (dbell->res->end + >= DBELL_INF(dmsg))) { + found = 1; + break; + } + } + if (found && dbell->dinb) { + dbell->dinb(fsl_dbell->mport[i], + dbell->dev_id, DBELL_SID(dmsg), + DBELL_TID(dmsg), + DBELL_INF(dmsg)); + break; + } + } + } + + if (!found) { + pr_debug + ("RIO: spurious doorbell," + " sid %2.2x tid %2.2x info %4.4x\n", + DBELL_SID(dmsg), DBELL_TID(dmsg), + DBELL_INF(dmsg)); + } + setbits32(&fsl_dbell->dbell_regs->dmr, DOORBELL_DMR_DI); + out_be32(&fsl_dbell->dbell_regs->dsr, DOORBELL_DSR_DIQI); + } + +out: + return IRQ_HANDLED; +} + +void msg_unit_error_handler(void) +{ + + /*XXX: Error recovery is not implemented, we just clear errors */ + out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0); + + out_be32((u32 *)(rmu_regs_win + RIO_IM0SR), IMSR_CLEAR); + out_be32((u32 *)(rmu_regs_win + RIO_IM1SR), IMSR_CLEAR); + out_be32((u32 *)(rmu_regs_win + RIO_OM0SR), OMSR_CLEAR); + out_be32((u32 *)(rmu_regs_win + RIO_OM1SR), OMSR_CLEAR); + + out_be32(&dbell->dbell_regs->odsr, ODSR_CLEAR); + out_be32(&dbell->dbell_regs->dsr, IDSR_CLEAR); + + out_be32(&pw->pw_regs->pwsr, IPWSR_CLEAR); +} + +/** + * fsl_rio_port_write_handler - MPC85xx port write interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * + * Handles port write interrupts. Parses a list of registered + * port write event handlers and executes a matching event handler. + */ +static irqreturn_t +fsl_rio_port_write_handler(int irq, void *dev_instance) +{ + u32 ipwmr, ipwsr; + struct fsl_rio_pw *pw = (struct fsl_rio_pw *)dev_instance; + u32 epwisr, tmp; + + epwisr = in_be32(rio_regs_win + RIO_EPWISR); + if (!(epwisr & RIO_EPWISR_PW)) + goto pw_done; + + ipwmr = in_be32(&pw->pw_regs->pwmr); + ipwsr = in_be32(&pw->pw_regs->pwsr); + +#ifdef DEBUG_PW + pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr); + if (ipwsr & RIO_IPWSR_QF) + pr_debug(" QF"); + if (ipwsr & RIO_IPWSR_TE) + pr_debug(" TE"); + if (ipwsr & RIO_IPWSR_QFI) + pr_debug(" QFI"); + if (ipwsr & RIO_IPWSR_PWD) + pr_debug(" PWD"); + if (ipwsr & RIO_IPWSR_PWB) + pr_debug(" PWB"); + pr_debug(" )\n"); +#endif + /* Schedule deferred processing if PW was received */ + if (ipwsr & RIO_IPWSR_QFI) { + /* Save PW message (if there is room in FIFO), + * otherwise discard it. + */ + if (kfifo_avail(&pw->pw_fifo) >= RIO_PW_MSG_SIZE) { + pw->port_write_msg.msg_count++; + kfifo_in(&pw->pw_fifo, pw->port_write_msg.virt, + RIO_PW_MSG_SIZE); + } else { + pw->port_write_msg.discard_count++; + pr_debug("RIO: ISR Discarded Port-Write Msg(s) (%d)\n", + pw->port_write_msg.discard_count); + } + /* Clear interrupt and issue Clear Queue command. This allows + * another port-write to be received. + */ + out_be32(&pw->pw_regs->pwsr, RIO_IPWSR_QFI); + out_be32(&pw->pw_regs->pwmr, ipwmr | RIO_IPWMR_CQ); + + schedule_work(&pw->pw_work); + } + + if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) { + pw->port_write_msg.err_count++; + pr_debug("RIO: Port-Write Transaction Err (%d)\n", + pw->port_write_msg.err_count); + /* Clear Transaction Error: port-write controller should be + * disabled when clearing this error + */ + out_be32(&pw->pw_regs->pwmr, ipwmr & ~RIO_IPWMR_PWE); + out_be32(&pw->pw_regs->pwsr, RIO_IPWSR_TE); + out_be32(&pw->pw_regs->pwmr, ipwmr); + } + + if (ipwsr & RIO_IPWSR_PWD) { + pw->port_write_msg.discard_count++; + pr_debug("RIO: Port Discarded Port-Write Msg(s) (%d)\n", + pw->port_write_msg.discard_count); + out_be32(&pw->pw_regs->pwsr, RIO_IPWSR_PWD); + } + +pw_done: + if (epwisr & RIO_EPWISR_PINT1) { + tmp = in_be32(rio_regs_win + RIO_LTLEDCSR); + pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp); + fsl_rio_port_error_handler(0); + } + + if (epwisr & RIO_EPWISR_PINT2) { + tmp = in_be32(rio_regs_win + RIO_LTLEDCSR); + pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp); + fsl_rio_port_error_handler(1); + } + + if (epwisr & RIO_EPWISR_MU) { + tmp = in_be32(rio_regs_win + RIO_LTLEDCSR); + pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp); + msg_unit_error_handler(); + } + + return IRQ_HANDLED; +} + +static void fsl_pw_dpc(struct work_struct *work) +{ + struct fsl_rio_pw *pw = container_of(work, struct fsl_rio_pw, pw_work); + u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)]; + + /* + * Process port-write messages + */ + while (kfifo_out_spinlocked(&pw->pw_fifo, (unsigned char *)msg_buffer, + RIO_PW_MSG_SIZE, &pw->pw_fifo_lock)) { + /* Process one message */ +#ifdef DEBUG_PW + { + u32 i; + pr_debug("%s : Port-Write Message:", __func__); + for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); i++) { + if ((i%4) == 0) + pr_debug("\n0x%02x: 0x%08x", i*4, + msg_buffer[i]); + else + pr_debug(" 0x%08x", msg_buffer[i]); + } + pr_debug("\n"); + } +#endif + /* Pass the port-write message to RIO core for processing */ + rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer); + } +} + +/** + * fsl_rio_pw_enable - enable/disable port-write interface init + * @mport: Master port implementing the port write unit + * @enable: 1=enable; 0=disable port-write message handling + */ +int fsl_rio_pw_enable(struct rio_mport *mport, int enable) +{ + u32 rval; + + rval = in_be32(&pw->pw_regs->pwmr); + + if (enable) + rval |= RIO_IPWMR_PWE; + else + rval &= ~RIO_IPWMR_PWE; + + out_be32(&pw->pw_regs->pwmr, rval); + + return 0; +} + +/** + * fsl_rio_port_write_init - MPC85xx port write interface init + * @mport: Master port implementing the port write unit + * + * Initializes port write unit hardware and DMA buffer + * ring. Called from fsl_rio_setup(). Returns %0 on success + * or %-ENOMEM on failure. + */ + +int fsl_rio_port_write_init(struct fsl_rio_pw *pw) +{ + int rc = 0; + + /* Following configurations require a disabled port write controller */ + out_be32(&pw->pw_regs->pwmr, + in_be32(&pw->pw_regs->pwmr) & ~RIO_IPWMR_PWE); + + /* Initialize port write */ + pw->port_write_msg.virt = dma_alloc_coherent(pw->dev, + RIO_PW_MSG_SIZE, + &pw->port_write_msg.phys, GFP_KERNEL); + if (!pw->port_write_msg.virt) { + pr_err("RIO: unable allocate port write queue\n"); + return -ENOMEM; + } + + pw->port_write_msg.err_count = 0; + pw->port_write_msg.discard_count = 0; + + /* Point dequeue/enqueue pointers at first entry */ + out_be32(&pw->pw_regs->epwqbar, 0); + out_be32(&pw->pw_regs->pwqbar, (u32) pw->port_write_msg.phys); + + pr_debug("EIPWQBAR: 0x%08x IPWQBAR: 0x%08x\n", + in_be32(&pw->pw_regs->epwqbar), + in_be32(&pw->pw_regs->pwqbar)); + + /* Clear interrupt status IPWSR */ + out_be32(&pw->pw_regs->pwsr, + (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD)); + + /* Configure port write contoller for snooping enable all reporting, + clear queue full */ + out_be32(&pw->pw_regs->pwmr, + RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ); + + + /* Hook up port-write handler */ + rc = request_irq(IRQ_RIO_PW(pw), fsl_rio_port_write_handler, + IRQF_SHARED, "port-write", (void *)pw); + if (rc < 0) { + pr_err("MPC85xx RIO: unable to request inbound doorbell irq"); + goto err_out; + } + /* Enable Error Interrupt */ + out_be32((u32 *)(rio_regs_win + RIO_LTLEECSR), LTLEECSR_ENABLE_ALL); + + INIT_WORK(&pw->pw_work, fsl_pw_dpc); + spin_lock_init(&pw->pw_fifo_lock); + if (kfifo_alloc(&pw->pw_fifo, RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) { + pr_err("FIFO allocation failed\n"); + rc = -ENOMEM; + goto err_out_irq; + } + + pr_debug("IPWMR: 0x%08x IPWSR: 0x%08x\n", + in_be32(&pw->pw_regs->pwmr), + in_be32(&pw->pw_regs->pwsr)); + + return rc; + +err_out_irq: + free_irq(IRQ_RIO_PW(pw), (void *)pw); +err_out: + dma_free_coherent(pw->dev, RIO_PW_MSG_SIZE, + pw->port_write_msg.virt, + pw->port_write_msg.phys); + return rc; +} + +/** + * fsl_rio_doorbell_send - Send a MPC85xx doorbell message + * @mport: RapidIO master port info + * @index: ID of RapidIO interface + * @destid: Destination ID of target device + * @data: 16-bit info field of RapidIO doorbell message + * + * Sends a MPC85xx doorbell message. Returns %0 on success or + * %-EINVAL on failure. + */ +int fsl_rio_doorbell_send(struct rio_mport *mport, + int index, u16 destid, u16 data) +{ + pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n", + index, destid, data); + + /* In the serial version silicons, such as MPC8548, MPC8641, + * below operations is must be. + */ + out_be32(&dbell->dbell_regs->odmr, 0x00000000); + out_be32(&dbell->dbell_regs->odretcr, 0x00000004); + out_be32(&dbell->dbell_regs->oddpr, destid << 16); + out_be32(&dbell->dbell_regs->oddatr, (index << 20) | data); + out_be32(&dbell->dbell_regs->odmr, 0x00000001); + + return 0; +} + +/** + * fsl_add_outb_message - Add message to the MPC85xx outbound message queue + * @mport: Master port with outbound message queue + * @rdev: Target of outbound message + * @mbox: Outbound mailbox + * @buffer: Message to add to outbound queue + * @len: Length of message + * + * Adds the @buffer message to the MPC85xx outbound message queue. Returns + * %0 on success or %-EINVAL on failure. + */ +int +fsl_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox, + void *buffer, size_t len) +{ + struct fsl_rmu *rmu = GET_RMM_HANDLE(mport); + u32 omr; + struct rio_tx_desc *desc = (struct rio_tx_desc *)rmu->msg_tx_ring.virt + + rmu->msg_tx_ring.tx_slot; + int ret = 0; + + pr_debug("RIO: fsl_add_outb_message(): destid %4.4x mbox %d buffer " \ + "%8.8x len %8.8x\n", rdev->destid, mbox, (int)buffer, len); + if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) { + ret = -EINVAL; + goto out; + } + + /* Copy and clear rest of buffer */ + memcpy(rmu->msg_tx_ring.virt_buffer[rmu->msg_tx_ring.tx_slot], buffer, + len); + if (len < (RIO_MAX_MSG_SIZE - 4)) + memset(rmu->msg_tx_ring.virt_buffer[rmu->msg_tx_ring.tx_slot] + + len, 0, RIO_MAX_MSG_SIZE - len); + + /* Set mbox field for message, and set destid */ + desc->dport = (rdev->destid << 16) | (mbox & 0x3); + + /* Enable EOMI interrupt and priority */ + desc->dattr = 0x28000000 | ((mport->index) << 20); + + /* Set transfer size aligned to next power of 2 (in double words) */ + desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len); + + /* Set snooping and source buffer address */ + desc->saddr = 0x00000004 + | rmu->msg_tx_ring.phys_buffer[rmu->msg_tx_ring.tx_slot]; + + /* Increment enqueue pointer */ + omr = in_be32(&rmu->msg_regs->omr); + out_be32(&rmu->msg_regs->omr, omr | RIO_MSG_OMR_MUI); + + /* Go to next descriptor */ + if (++rmu->msg_tx_ring.tx_slot == rmu->msg_tx_ring.size) + rmu->msg_tx_ring.tx_slot = 0; + +out: + return ret; +} + +/** + * fsl_open_outb_mbox - Initialize MPC85xx outbound mailbox + * @mport: Master port implementing the outbound message unit + * @dev_id: Device specific pointer to pass on event + * @mbox: Mailbox to open + * @entries: Number of entries in the outbound mailbox ring + * + * Initializes buffer ring, request the outbound message interrupt, + * and enables the outbound message unit. Returns %0 on success and + * %-EINVAL or %-ENOMEM on failure. + */ +int +fsl_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) +{ + int i, j, rc = 0; + struct rio_priv *priv = mport->priv; + struct fsl_rmu *rmu = GET_RMM_HANDLE(mport); + + if ((entries < RIO_MIN_TX_RING_SIZE) || + (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) { + rc = -EINVAL; + goto out; + } + + /* Initialize shadow copy ring */ + rmu->msg_tx_ring.dev_id = dev_id; + rmu->msg_tx_ring.size = entries; + + for (i = 0; i < rmu->msg_tx_ring.size; i++) { + rmu->msg_tx_ring.virt_buffer[i] = + dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, + &rmu->msg_tx_ring.phys_buffer[i], GFP_KERNEL); + if (!rmu->msg_tx_ring.virt_buffer[i]) { + rc = -ENOMEM; + for (j = 0; j < rmu->msg_tx_ring.size; j++) + if (rmu->msg_tx_ring.virt_buffer[j]) + dma_free_coherent(priv->dev, + RIO_MSG_BUFFER_SIZE, + rmu->msg_tx_ring. + virt_buffer[j], + rmu->msg_tx_ring. + phys_buffer[j]); + goto out; + } + } + + /* Initialize outbound message descriptor ring */ + rmu->msg_tx_ring.virt = dma_alloc_coherent(priv->dev, + rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE, + &rmu->msg_tx_ring.phys, GFP_KERNEL); + if (!rmu->msg_tx_ring.virt) { + rc = -ENOMEM; + goto out_dma; + } + memset(rmu->msg_tx_ring.virt, 0, + rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE); + rmu->msg_tx_ring.tx_slot = 0; + + /* Point dequeue/enqueue pointers at first entry in ring */ + out_be32(&rmu->msg_regs->odqdpar, rmu->msg_tx_ring.phys); + out_be32(&rmu->msg_regs->odqepar, rmu->msg_tx_ring.phys); + + /* Configure for snooping */ + out_be32(&rmu->msg_regs->osar, 0x00000004); + + /* Clear interrupt status */ + out_be32(&rmu->msg_regs->osr, 0x000000b3); + + /* Hook up outbound message handler */ + rc = request_irq(IRQ_RIO_TX(mport), fsl_rio_tx_handler, 0, + "msg_tx", (void *)mport); + if (rc < 0) + goto out_irq; + + /* + * Configure outbound message unit + * Snooping + * Interrupts (all enabled, except QEIE) + * Chaining mode + * Disable + */ + out_be32(&rmu->msg_regs->omr, 0x00100220); + + /* Set number of entries */ + out_be32(&rmu->msg_regs->omr, + in_be32(&rmu->msg_regs->omr) | + ((get_bitmask_order(entries) - 2) << 12)); + + /* Now enable the unit */ + out_be32(&rmu->msg_regs->omr, in_be32(&rmu->msg_regs->omr) | 0x1); + +out: + return rc; + +out_irq: + dma_free_coherent(priv->dev, + rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE, + rmu->msg_tx_ring.virt, rmu->msg_tx_ring.phys); + +out_dma: + for (i = 0; i < rmu->msg_tx_ring.size; i++) + dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, + rmu->msg_tx_ring.virt_buffer[i], + rmu->msg_tx_ring.phys_buffer[i]); + + return rc; +} + +/** + * fsl_close_outb_mbox - Shut down MPC85xx outbound mailbox + * @mport: Master port implementing the outbound message unit + * @mbox: Mailbox to close + * + * Disables the outbound message unit, free all buffers, and + * frees the outbound message interrupt. + */ +void fsl_close_outb_mbox(struct rio_mport *mport, int mbox) +{ + struct rio_priv *priv = mport->priv; + struct fsl_rmu *rmu = GET_RMM_HANDLE(mport); + + /* Disable inbound message unit */ + out_be32(&rmu->msg_regs->omr, 0); + + /* Free ring */ + dma_free_coherent(priv->dev, + rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE, + rmu->msg_tx_ring.virt, rmu->msg_tx_ring.phys); + + /* Free interrupt */ + free_irq(IRQ_RIO_TX(mport), (void *)mport); +} + +/** + * fsl_open_inb_mbox - Initialize MPC85xx inbound mailbox + * @mport: Master port implementing the inbound message unit + * @dev_id: Device specific pointer to pass on event + * @mbox: Mailbox to open + * @entries: Number of entries in the inbound mailbox ring + * + * Initializes buffer ring, request the inbound message interrupt, + * and enables the inbound message unit. Returns %0 on success + * and %-EINVAL or %-ENOMEM on failure. + */ +int +fsl_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) +{ + int i, rc = 0; + struct rio_priv *priv = mport->priv; + struct fsl_rmu *rmu = GET_RMM_HANDLE(mport); + + if ((entries < RIO_MIN_RX_RING_SIZE) || + (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) { + rc = -EINVAL; + goto out; + } + + /* Initialize client buffer ring */ + rmu->msg_rx_ring.dev_id = dev_id; + rmu->msg_rx_ring.size = entries; + rmu->msg_rx_ring.rx_slot = 0; + for (i = 0; i < rmu->msg_rx_ring.size; i++) + rmu->msg_rx_ring.virt_buffer[i] = NULL; + + /* Initialize inbound message ring */ + rmu->msg_rx_ring.virt = dma_alloc_coherent(priv->dev, + rmu->msg_rx_ring.size * RIO_MAX_MSG_SIZE, + &rmu->msg_rx_ring.phys, GFP_KERNEL); + if (!rmu->msg_rx_ring.virt) { + rc = -ENOMEM; + goto out; + } + + /* Point dequeue/enqueue pointers at first entry in ring */ + out_be32(&rmu->msg_regs->ifqdpar, (u32) rmu->msg_rx_ring.phys); + out_be32(&rmu->msg_regs->ifqepar, (u32) rmu->msg_rx_ring.phys); + + /* Clear interrupt status */ + out_be32(&rmu->msg_regs->isr, 0x00000091); + + /* Hook up inbound message handler */ + rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0, + "msg_rx", (void *)mport); + if (rc < 0) { + dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, + rmu->msg_tx_ring.virt_buffer[i], + rmu->msg_tx_ring.phys_buffer[i]); + goto out; + } + + /* + * Configure inbound message unit: + * Snooping + * 4KB max message size + * Unmask all interrupt sources + * Disable + */ + out_be32(&rmu->msg_regs->imr, 0x001b0060); + + /* Set number of queue entries */ + setbits32(&rmu->msg_regs->imr, (get_bitmask_order(entries) - 2) << 12); + + /* Now enable the unit */ + setbits32(&rmu->msg_regs->imr, 0x1); + +out: + return rc; +} + +/** + * fsl_close_inb_mbox - Shut down MPC85xx inbound mailbox + * @mport: Master port implementing the inbound message unit + * @mbox: Mailbox to close + * + * Disables the inbound message unit, free all buffers, and + * frees the inbound message interrupt. + */ +void fsl_close_inb_mbox(struct rio_mport *mport, int mbox) +{ + struct rio_priv *priv = mport->priv; + struct fsl_rmu *rmu = GET_RMM_HANDLE(mport); + + /* Disable inbound message unit */ + out_be32(&rmu->msg_regs->imr, 0); + + /* Free ring */ + dma_free_coherent(priv->dev, rmu->msg_rx_ring.size * RIO_MAX_MSG_SIZE, + rmu->msg_rx_ring.virt, rmu->msg_rx_ring.phys); + + /* Free interrupt */ + free_irq(IRQ_RIO_RX(mport), (void *)mport); +} + +/** + * fsl_add_inb_buffer - Add buffer to the MPC85xx inbound message queue + * @mport: Master port implementing the inbound message unit + * @mbox: Inbound mailbox number + * @buf: Buffer to add to inbound queue + * + * Adds the @buf buffer to the MPC85xx inbound message queue. Returns + * %0 on success or %-EINVAL on failure. + */ +int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf) +{ + int rc = 0; + struct fsl_rmu *rmu = GET_RMM_HANDLE(mport); + + pr_debug("RIO: fsl_add_inb_buffer(), msg_rx_ring.rx_slot %d\n", + rmu->msg_rx_ring.rx_slot); + + if (rmu->msg_rx_ring.virt_buffer[rmu->msg_rx_ring.rx_slot]) { + printk(KERN_ERR + "RIO: error adding inbound buffer %d, buffer exists\n", + rmu->msg_rx_ring.rx_slot); + rc = -EINVAL; + goto out; + } + + rmu->msg_rx_ring.virt_buffer[rmu->msg_rx_ring.rx_slot] = buf; + if (++rmu->msg_rx_ring.rx_slot == rmu->msg_rx_ring.size) + rmu->msg_rx_ring.rx_slot = 0; + +out: + return rc; +} + +/** + * fsl_get_inb_message - Fetch inbound message from the MPC85xx message unit + * @mport: Master port implementing the inbound message unit + * @mbox: Inbound mailbox number + * + * Gets the next available inbound message from the inbound message queue. + * A pointer to the message is returned on success or NULL on failure. + */ +void *fsl_get_inb_message(struct rio_mport *mport, int mbox) +{ + struct fsl_rmu *rmu = GET_RMM_HANDLE(mport); + u32 phys_buf, virt_buf; + void *buf = NULL; + int buf_idx; + + phys_buf = in_be32(&rmu->msg_regs->ifqdpar); + + /* If no more messages, then bail out */ + if (phys_buf == in_be32(&rmu->msg_regs->ifqepar)) + goto out2; + + virt_buf = (u32) rmu->msg_rx_ring.virt + (phys_buf + - rmu->msg_rx_ring.phys); + buf_idx = (phys_buf - rmu->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE; + buf = rmu->msg_rx_ring.virt_buffer[buf_idx]; + + if (!buf) { + printk(KERN_ERR + "RIO: inbound message copy failed, no buffers\n"); + goto out1; + } + + /* Copy max message size, caller is expected to allocate that big */ + memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE); + + /* Clear the available buffer */ + rmu->msg_rx_ring.virt_buffer[buf_idx] = NULL; + +out1: + setbits32(&rmu->msg_regs->imr, RIO_MSG_IMR_MI); + +out2: + return buf; +} + +/** + * fsl_rio_doorbell_init - MPC85xx doorbell interface init + * @mport: Master port implementing the inbound doorbell unit + * + * Initializes doorbell unit hardware and inbound DMA buffer + * ring. Called from fsl_rio_setup(). Returns %0 on success + * or %-ENOMEM on failure. + */ +int fsl_rio_doorbell_init(struct fsl_rio_dbell *dbell) +{ + int rc = 0; + + /* Initialize inbound doorbells */ + dbell->dbell_ring.virt = dma_alloc_coherent(dbell->dev, 512 * + DOORBELL_MESSAGE_SIZE, &dbell->dbell_ring.phys, GFP_KERNEL); + if (!dbell->dbell_ring.virt) { + printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n"); + rc = -ENOMEM; + goto out; + } + + /* Point dequeue/enqueue pointers at first entry in ring */ + out_be32(&dbell->dbell_regs->dqdpar, (u32) dbell->dbell_ring.phys); + out_be32(&dbell->dbell_regs->dqepar, (u32) dbell->dbell_ring.phys); + + /* Clear interrupt status */ + out_be32(&dbell->dbell_regs->dsr, 0x00000091); + + /* Hook up doorbell handler */ + rc = request_irq(IRQ_RIO_BELL(dbell), fsl_rio_dbell_handler, 0, + "dbell_rx", (void *)dbell); + if (rc < 0) { + dma_free_coherent(dbell->dev, 512 * DOORBELL_MESSAGE_SIZE, + dbell->dbell_ring.virt, dbell->dbell_ring.phys); + printk(KERN_ERR + "MPC85xx RIO: unable to request inbound doorbell irq"); + goto out; + } + + /* Configure doorbells for snooping, 512 entries, and enable */ + out_be32(&dbell->dbell_regs->dmr, 0x00108161); + +out: + return rc; +} + +int fsl_rio_setup_rmu(struct rio_mport *mport, struct device_node *node) +{ + struct rio_priv *priv; + struct fsl_rmu *rmu; + u64 msg_start; + const u32 *msg_addr; + int mlen; + int aw; + + if (!mport || !mport->priv) + return -EINVAL; + + priv = mport->priv; + + if (!node) { + dev_warn(priv->dev, "Can't get %s property 'fsl,rmu'\n", + priv->dev->of_node->full_name); + return -EINVAL; + } + + rmu = kzalloc(sizeof(struct fsl_rmu), GFP_KERNEL); + if (!rmu) + return -ENOMEM; + + aw = of_n_addr_cells(node); + msg_addr = of_get_property(node, "reg", &mlen); + if (!msg_addr) { + pr_err("%s: unable to find 'reg' property of message-unit\n", + node->full_name); + kfree(rmu); + return -ENOMEM; + } + msg_start = of_read_number(msg_addr, aw); + + rmu->msg_regs = (struct rio_msg_regs *) + (rmu_regs_win + (u32)msg_start); + + rmu->txirq = irq_of_parse_and_map(node, 0); + rmu->rxirq = irq_of_parse_and_map(node, 1); + printk(KERN_INFO "%s: txirq: %d, rxirq %d\n", + node->full_name, rmu->txirq, rmu->rxirq); + + priv->rmm_handle = rmu; + + rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); + rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 0); + rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); + + return 0; +} diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 8c7e8528e7c4..4e9ccb1015de 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -154,7 +154,7 @@ static inline unsigned int mpic_processor_id(struct mpic *mpic) { unsigned int cpu = 0; - if (mpic->flags & MPIC_PRIMARY) + if (!(mpic->flags & MPIC_SECONDARY)) cpu = hard_smp_processor_id(); return cpu; @@ -315,29 +315,25 @@ static void _mpic_map_mmio(struct mpic *mpic, phys_addr_t phys_addr, } #ifdef CONFIG_PPC_DCR -static void _mpic_map_dcr(struct mpic *mpic, struct device_node *node, - struct mpic_reg_bank *rb, +static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb, unsigned int offset, unsigned int size) { - const u32 *dbasep; - - dbasep = of_get_property(node, "dcr-reg", NULL); - - rb->dhost = dcr_map(node, *dbasep + offset, size); + phys_addr_t phys_addr = dcr_resource_start(mpic->node, 0); + rb->dhost = dcr_map(mpic->node, phys_addr + offset, size); BUG_ON(!DCR_MAP_OK(rb->dhost)); } -static inline void mpic_map(struct mpic *mpic, struct device_node *node, +static inline void mpic_map(struct mpic *mpic, phys_addr_t phys_addr, struct mpic_reg_bank *rb, unsigned int offset, unsigned int size) { if (mpic->flags & MPIC_USES_DCR) - _mpic_map_dcr(mpic, node, rb, offset, size); + _mpic_map_dcr(mpic, rb, offset, size); else _mpic_map_mmio(mpic, phys_addr, rb, offset, size); } #else /* CONFIG_PPC_DCR */ -#define mpic_map(m,n,p,b,o,s) _mpic_map_mmio(m,p,b,o,s) +#define mpic_map(m,p,b,o,s) _mpic_map_mmio(m,p,b,o,s) #endif /* !CONFIG_PPC_DCR */ @@ -901,7 +897,7 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type) if (vold != vnew) mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), vnew); - return IRQ_SET_MASK_OK_NOCOPY;; + return IRQ_SET_MASK_OK_NOCOPY; } void mpic_set_vector(unsigned int virq, unsigned int vector) @@ -990,7 +986,7 @@ static int mpic_host_map(struct irq_host *h, unsigned int virq, #ifdef CONFIG_SMP else if (hw >= mpic->ipi_vecs[0]) { - WARN_ON(!(mpic->flags & MPIC_PRIMARY)); + WARN_ON(mpic->flags & MPIC_SECONDARY); DBG("mpic: mapping as IPI\n"); irq_set_chip_data(virq, mpic); @@ -1001,7 +997,7 @@ static int mpic_host_map(struct irq_host *h, unsigned int virq, #endif /* CONFIG_SMP */ if (hw >= mpic->timer_vecs[0] && hw <= mpic->timer_vecs[7]) { - WARN_ON(!(mpic->flags & MPIC_PRIMARY)); + WARN_ON(mpic->flags & MPIC_SECONDARY); DBG("mpic: mapping as timer\n"); irq_set_chip_data(virq, mpic); @@ -1115,17 +1111,28 @@ static int mpic_host_xlate(struct irq_host *h, struct device_node *ct, return 0; } +/* IRQ handler for a secondary MPIC cascaded from another IRQ controller */ +static void mpic_cascade(unsigned int irq, struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + struct mpic *mpic = irq_desc_get_handler_data(desc); + unsigned int virq; + + BUG_ON(!(mpic->flags & MPIC_SECONDARY)); + + virq = mpic_get_one_irq(mpic); + if (virq != NO_IRQ) + generic_handle_irq(virq); + + chip->irq_eoi(&desc->irq_data); +} + static struct irq_host_ops mpic_host_ops = { .match = mpic_host_match, .map = mpic_host_map, .xlate = mpic_host_xlate, }; -static int mpic_reset_prohibited(struct device_node *node) -{ - return node && of_get_property(node, "pic-no-reset", NULL); -} - /* * Exported functions */ @@ -1137,27 +1144,60 @@ struct mpic * __init mpic_alloc(struct device_node *node, unsigned int irq_count, const char *name) { - struct mpic *mpic; - u32 greg_feature; - const char *vers; - int i; - int intvec_top; - u64 paddr = phys_addr; + int i, psize, intvec_top; + struct mpic *mpic; + u32 greg_feature; + const char *vers; + const u32 *psrc; + + /* Default MPIC search parameters */ + static const struct of_device_id __initconst mpic_device_id[] = { + { .type = "open-pic", }, + { .compatible = "open-pic", }, + {}, + }; + + /* + * If we were not passed a device-tree node, then perform the default + * search for standardized a standardized OpenPIC. + */ + if (node) { + node = of_node_get(node); + } else { + node = of_find_matching_node(NULL, mpic_device_id); + if (!node) + return NULL; + } + + /* Pick the physical address from the device tree if unspecified */ + if (!phys_addr) { + /* Check if it is DCR-based */ + if (of_get_property(node, "dcr-reg", NULL)) { + flags |= MPIC_USES_DCR; + } else { + struct resource r; + if (of_address_to_resource(node, 0, &r)) + goto err_of_node_put; + phys_addr = r.start; + } + } mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL); if (mpic == NULL) - return NULL; + goto err_of_node_put; mpic->name = name; + mpic->node = node; + mpic->paddr = phys_addr; mpic->hc_irq = mpic_irq_chip; mpic->hc_irq.name = name; - if (flags & MPIC_PRIMARY) + if (!(flags & MPIC_SECONDARY)) mpic->hc_irq.irq_set_affinity = mpic_set_affinity; #ifdef CONFIG_MPIC_U3_HT_IRQS mpic->hc_ht_irq = mpic_irq_ht_chip; mpic->hc_ht_irq.name = name; - if (flags & MPIC_PRIMARY) + if (!(flags & MPIC_SECONDARY)) mpic->hc_ht_irq.irq_set_affinity = mpic_set_affinity; #endif /* CONFIG_MPIC_U3_HT_IRQS */ @@ -1194,28 +1234,22 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->spurious_vec = intvec_top; /* Check for "big-endian" in device-tree */ - if (node && of_get_property(node, "big-endian", NULL) != NULL) + if (of_get_property(mpic->node, "big-endian", NULL) != NULL) mpic->flags |= MPIC_BIG_ENDIAN; - if (node && of_device_is_compatible(node, "fsl,mpic")) + if (of_device_is_compatible(mpic->node, "fsl,mpic")) mpic->flags |= MPIC_FSL; /* Look for protected sources */ - if (node) { - int psize; - unsigned int bits, mapsize; - const u32 *psrc = - of_get_property(node, "protected-sources", &psize); - if (psrc) { - psize /= 4; - bits = intvec_top + 1; - mapsize = BITS_TO_LONGS(bits) * sizeof(unsigned long); - mpic->protected = kzalloc(mapsize, GFP_KERNEL); - BUG_ON(mpic->protected == NULL); - for (i = 0; i < psize; i++) { - if (psrc[i] > intvec_top) - continue; - __set_bit(psrc[i], mpic->protected); - } + psrc = of_get_property(mpic->node, "protected-sources", &psize); + if (psrc) { + /* Allocate a bitmap with one bit per interrupt */ + unsigned int mapsize = BITS_TO_LONGS(intvec_top + 1); + mpic->protected = kzalloc(mapsize*sizeof(long), GFP_KERNEL); + BUG_ON(mpic->protected == NULL); + for (i = 0; i < psize/sizeof(u32); i++) { + if (psrc[i] > intvec_top) + continue; + __set_bit(psrc[i], mpic->protected); } } @@ -1224,42 +1258,32 @@ struct mpic * __init mpic_alloc(struct device_node *node, #endif /* default register type */ - mpic->reg_type = (flags & MPIC_BIG_ENDIAN) ? - mpic_access_mmio_be : mpic_access_mmio_le; - - /* If no physical address is passed in, a device-node is mandatory */ - BUG_ON(paddr == 0 && node == NULL); + if (flags & MPIC_BIG_ENDIAN) + mpic->reg_type = mpic_access_mmio_be; + else + mpic->reg_type = mpic_access_mmio_le; - /* If no physical address passed in, check if it's dcr based */ - if (paddr == 0 && of_get_property(node, "dcr-reg", NULL) != NULL) { + /* + * An MPIC with a "dcr-reg" property must be accessed that way, but + * only if the kernel includes DCR support. + */ #ifdef CONFIG_PPC_DCR - mpic->flags |= MPIC_USES_DCR; + if (flags & MPIC_USES_DCR) mpic->reg_type = mpic_access_dcr; #else - BUG(); -#endif /* CONFIG_PPC_DCR */ - } - - /* If the MPIC is not DCR based, and no physical address was passed - * in, try to obtain one - */ - if (paddr == 0 && !(mpic->flags & MPIC_USES_DCR)) { - const u32 *reg = of_get_property(node, "reg", NULL); - BUG_ON(reg == NULL); - paddr = of_translate_address(node, reg); - BUG_ON(paddr == OF_BAD_ADDR); - } + BUG_ON(flags & MPIC_USES_DCR); +#endif /* Map the global registers */ - mpic_map(mpic, node, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000); - mpic_map(mpic, node, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000); + mpic_map(mpic, mpic->paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000); + mpic_map(mpic, mpic->paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000); /* Reset */ /* When using a device-node, reset requests are only honored if the MPIC * is allowed to reset. */ - if (mpic_reset_prohibited(node)) + if (of_get_property(mpic->node, "pic-no-reset", NULL)) mpic->flags |= MPIC_NO_RESET; if ((flags & MPIC_WANTS_RESET) && !(mpic->flags & MPIC_NO_RESET)) { @@ -1307,7 +1331,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, for_each_possible_cpu(i) { unsigned int cpu = get_hard_smp_processor_id(i); - mpic_map(mpic, node, paddr, &mpic->cpuregs[cpu], + mpic_map(mpic, mpic->paddr, &mpic->cpuregs[cpu], MPIC_INFO(CPU_BASE) + cpu * MPIC_INFO(CPU_STRIDE), 0x1000); } @@ -1315,16 +1339,21 @@ struct mpic * __init mpic_alloc(struct device_node *node, /* Initialize main ISU if none provided */ if (mpic->isu_size == 0) { mpic->isu_size = mpic->num_sources; - mpic_map(mpic, node, paddr, &mpic->isus[0], + mpic_map(mpic, mpic->paddr, &mpic->isus[0], MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size); } mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1); mpic->isu_mask = (1 << mpic->isu_shift) - 1; - mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, + mpic->irqhost = irq_alloc_host(mpic->node, IRQ_HOST_MAP_LINEAR, isu_size ? isu_size : mpic->num_sources, &mpic_host_ops, flags & MPIC_LARGE_VECTORS ? 2048 : 256); + + /* + * FIXME: The code leaks the MPIC object and mappings here; this + * is very unlikely to fail but it ought to be fixed anyways. + */ if (mpic->irqhost == NULL) return NULL; @@ -1347,19 +1376,23 @@ struct mpic * __init mpic_alloc(struct device_node *node, } printk(KERN_INFO "mpic: Setting up MPIC \"%s\" version %s at %llx," " max %d CPUs\n", - name, vers, (unsigned long long)paddr, num_possible_cpus()); + name, vers, (unsigned long long)mpic->paddr, num_possible_cpus()); printk(KERN_INFO "mpic: ISU size: %d, shift: %d, mask: %x\n", mpic->isu_size, mpic->isu_shift, mpic->isu_mask); mpic->next = mpics; mpics = mpic; - if (flags & MPIC_PRIMARY) { + if (!(flags & MPIC_SECONDARY)) { mpic_primary = mpic; irq_set_default_host(mpic->irqhost); } return mpic; + +err_of_node_put: + of_node_put(node); + return NULL; } void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, @@ -1369,7 +1402,7 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, BUG_ON(isu_num >= MPIC_MAX_ISU); - mpic_map(mpic, mpic->irqhost->of_node, + mpic_map(mpic, paddr, &mpic->isus[isu_num], 0, MPIC_INFO(IRQ_STRIDE) * mpic->isu_size); @@ -1385,8 +1418,7 @@ void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count) void __init mpic_init(struct mpic *mpic) { - int i; - int cpu; + int i, cpu; BUG_ON(mpic->num_sources == 0); @@ -1424,7 +1456,7 @@ void __init mpic_init(struct mpic *mpic) /* Do the HT PIC fixups on U3 broken mpic */ DBG("MPIC flags: %x\n", mpic->flags); - if ((mpic->flags & MPIC_U3_HT_IRQS) && (mpic->flags & MPIC_PRIMARY)) { + if ((mpic->flags & MPIC_U3_HT_IRQS) && !(mpic->flags & MPIC_SECONDARY)) { mpic_scan_ht_pics(mpic); mpic_u3msi_init(mpic); } @@ -1471,6 +1503,17 @@ void __init mpic_init(struct mpic *mpic) GFP_KERNEL); BUG_ON(mpic->save_data == NULL); #endif + + /* Check if this MPIC is chained from a parent interrupt controller */ + if (mpic->flags & MPIC_SECONDARY) { + int virq = irq_of_parse_and_map(mpic->node, 0); + if (virq != NO_IRQ) { + printk(KERN_INFO "%s: hooking up to IRQ %d\n", + mpic->node->full_name, virq); + irq_set_handler_data(virq, mpic); + irq_set_chained_handler(virq, &mpic_cascade); + } + } } void __init mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio) diff --git a/arch/powerpc/sysdev/ppc4xx_cpm.c b/arch/powerpc/sysdev/ppc4xx_cpm.c index 73b86cc5ea74..82e2cfe35c62 100644 --- a/arch/powerpc/sysdev/ppc4xx_cpm.c +++ b/arch/powerpc/sysdev/ppc4xx_cpm.c @@ -179,12 +179,12 @@ static struct kobj_attribute cpm_idle_attr = static void cpm_idle_config_sysfs(void) { - struct sys_device *sys_dev; + struct device *dev; unsigned long ret; - sys_dev = get_cpu_sysdev(0); + dev = get_cpu_device(0); - ret = sysfs_create_file(&sys_dev->kobj, + ret = sysfs_create_file(&dev->kobj, &cpm_idle_attr.attr); if (ret) printk(KERN_WARNING diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index 862f11b3821e..4f05f7542346 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -185,9 +185,15 @@ static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose, out: dma_offset_set = 1; pci_dram_offset = res->start; + hose->dma_window_base_cur = res->start; + hose->dma_window_size = resource_size(res); printk(KERN_INFO "4xx PCI DMA offset set to 0x%08lx\n", pci_dram_offset); + printk(KERN_INFO "4xx PCI DMA window base to 0x%016llx\n", + (unsigned long long)hose->dma_window_base_cur); + printk(KERN_INFO "DMA window size 0x%016llx\n", + (unsigned long long)hose->dma_window_size); return 0; } @@ -647,6 +653,7 @@ static unsigned int ppc4xx_pciex_port_count; struct ppc4xx_pciex_hwops { + bool want_sdr; int (*core_init)(struct device_node *np); int (*port_init_hw)(struct ppc4xx_pciex_port *port); int (*setup_utl)(struct ppc4xx_pciex_port *port); @@ -916,6 +923,7 @@ static int ppc440speB_pciex_init_utl(struct ppc4xx_pciex_port *port) static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata = { + .want_sdr = true, .core_init = ppc440spe_pciex_core_init, .port_init_hw = ppc440speA_pciex_init_port_hw, .setup_utl = ppc440speA_pciex_init_utl, @@ -924,6 +932,7 @@ static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata = static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata = { + .want_sdr = true, .core_init = ppc440spe_pciex_core_init, .port_init_hw = ppc440speB_pciex_init_port_hw, .setup_utl = ppc440speB_pciex_init_utl, @@ -1034,6 +1043,7 @@ static int ppc460ex_pciex_init_utl(struct ppc4xx_pciex_port *port) static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata = { + .want_sdr = true, .core_init = ppc460ex_pciex_core_init, .port_init_hw = ppc460ex_pciex_init_port_hw, .setup_utl = ppc460ex_pciex_init_utl, @@ -1181,6 +1191,7 @@ done: } static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = { + .want_sdr = true, .core_init = ppc460sx_pciex_core_init, .port_init_hw = ppc460sx_pciex_init_port_hw, .setup_utl = ppc460sx_pciex_init_utl, @@ -1276,6 +1287,7 @@ static int ppc405ex_pciex_init_utl(struct ppc4xx_pciex_port *port) static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata = { + .want_sdr = true, .core_init = ppc405ex_pciex_core_init, .port_init_hw = ppc405ex_pciex_init_port_hw, .setup_utl = ppc405ex_pciex_init_utl, @@ -1284,6 +1296,52 @@ static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata = #endif /* CONFIG_40x */ +#ifdef CONFIG_476FPE +static int __init ppc_476fpe_pciex_core_init(struct device_node *np) +{ + return 4; +} + +static void __init ppc_476fpe_pciex_check_link(struct ppc4xx_pciex_port *port) +{ + u32 timeout_ms = 20; + u32 val = 0, mask = (PECFG_TLDLP_LNKUP|PECFG_TLDLP_PRESENT); + void __iomem *mbase = ioremap(port->cfg_space.start + 0x10000000, + 0x1000); + + printk(KERN_INFO "PCIE%d: Checking link...\n", port->index); + + if (mbase == NULL) { + printk(KERN_WARNING "PCIE%d: failed to get cfg space\n", + port->index); + return; + } + + while (timeout_ms--) { + val = in_le32(mbase + PECFG_TLDLP); + + if ((val & mask) == mask) + break; + msleep(10); + } + + if (val & PECFG_TLDLP_PRESENT) { + printk(KERN_INFO "PCIE%d: link is up !\n", port->index); + port->link = 1; + } else + printk(KERN_WARNING "PCIE%d: Link up failed\n", port->index); + + iounmap(mbase); + return; +} + +static struct ppc4xx_pciex_hwops ppc_476fpe_pcie_hwops __initdata = +{ + .core_init = ppc_476fpe_pciex_core_init, + .check_link = ppc_476fpe_pciex_check_link, +}; +#endif /* CONFIG_476FPE */ + /* Check that the core has been initied and if not, do it */ static int __init ppc4xx_pciex_check_core_init(struct device_node *np) { @@ -1309,6 +1367,10 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np) if (of_device_is_compatible(np, "ibm,plb-pciex-405ex")) ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops; #endif +#ifdef CONFIG_476FPE + if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe")) + ppc4xx_pciex_hwops = &ppc_476fpe_pcie_hwops; +#endif if (ppc4xx_pciex_hwops == NULL) { printk(KERN_WARNING "PCIE: unknown host type %s\n", np->full_name); @@ -1617,6 +1679,10 @@ static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port *port, dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | DCRO_PEGPL_460SX_OMR1MSKL_UOT | DCRO_PEGPL_OMRxMSKL_VAL); + else if (of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe")) + dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, + sa | DCRO_PEGPL_476FPE_OMR1MSKL_UOT + | DCRO_PEGPL_OMRxMSKL_VAL); else dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | DCRO_PEGPL_OMR1MSKL_UOT @@ -1739,9 +1805,10 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port, /* Calculate window size */ sa = (0xffffffffffffffffull << ilog2(size)); if (res->flags & IORESOURCE_PREFETCH) - sa |= 0x8; + sa |= PCI_BASE_ADDRESS_MEM_PREFETCH; - if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx")) + if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx") || + of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe")) sa |= PCI_BASE_ADDRESS_MEM_TYPE_64; out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa)); @@ -1972,13 +2039,15 @@ static void __init ppc4xx_probe_pciex_bridge(struct device_node *np) } port->node = of_node_get(np); - pval = of_get_property(np, "sdr-base", NULL); - if (pval == NULL) { - printk(KERN_ERR "PCIE: missing sdr-base for %s\n", - np->full_name); - return; + if (ppc4xx_pciex_hwops->want_sdr) { + pval = of_get_property(np, "sdr-base", NULL); + if (pval == NULL) { + printk(KERN_ERR "PCIE: missing sdr-base for %s\n", + np->full_name); + return; + } + port->sdr_base = *pval; } - port->sdr_base = *pval; /* Check if device_type property is set to "pci" or "pci-endpoint". * Resulting from this setup this PCIe port will be configured diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h index 32ce763a375a..bb4821938ab1 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.h +++ b/arch/powerpc/sysdev/ppc4xx_pci.h @@ -476,6 +476,13 @@ #define DCRO_PEGPL_OMR1MSKL_UOT 0x00000002 #define DCRO_PEGPL_OMR3MSKL_IO 0x00000002 +/* 476FPE */ +#define PCCFG_LCPA 0x270 +#define PECFG_TLDLP 0x3F8 +#define PECFG_TLDLP_LNKUP 0x00000008 +#define PECFG_TLDLP_PRESENT 0x00000010 +#define DCRO_PEGPL_476FPE_OMR1MSKL_UOT 0x00000004 + /* SDR Bit Mappings */ #define PESDRx_RCSSET_HLDPLB 0x10000000 #define PESDRx_RCSSET_RSTGU 0x01000000 diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c index e23f23cf9f5c..521e67a49dc4 100644 --- a/arch/powerpc/sysdev/qe_lib/gpio.c +++ b/arch/powerpc/sysdev/qe_lib/gpio.c @@ -139,14 +139,10 @@ struct qe_pin { struct qe_pin *qe_pin_request(struct device_node *np, int index) { struct qe_pin *qe_pin; - struct device_node *gpio_np; struct gpio_chip *gc; struct of_mm_gpio_chip *mm_gc; struct qe_gpio_chip *qe_gc; int err; - int size; - const void *gpio_spec; - const u32 *gpio_cells; unsigned long flags; qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL); @@ -155,45 +151,25 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index) return ERR_PTR(-ENOMEM); } - err = of_parse_phandles_with_args(np, "gpios", "#gpio-cells", index, - &gpio_np, &gpio_spec); - if (err) { - pr_debug("%s: can't parse gpios property\n", __func__); + err = of_get_gpio(np, index); + if (err < 0) + goto err0; + gc = gpio_to_chip(err); + if (WARN_ON(!gc)) goto err0; - } - if (!of_device_is_compatible(gpio_np, "fsl,mpc8323-qe-pario-bank")) { + if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) { pr_debug("%s: tried to get a non-qe pin\n", __func__); err = -EINVAL; - goto err1; - } - - gc = of_node_to_gpiochip(gpio_np); - if (!gc) { - pr_debug("%s: gpio controller %s isn't registered\n", - np->full_name, gpio_np->full_name); - err = -ENODEV; - goto err1; - } - - gpio_cells = of_get_property(gpio_np, "#gpio-cells", &size); - if (!gpio_cells || size != sizeof(*gpio_cells) || - *gpio_cells != gc->of_gpio_n_cells) { - pr_debug("%s: wrong #gpio-cells for %s\n", - np->full_name, gpio_np->full_name); - err = -EINVAL; - goto err1; + goto err0; } - err = gc->of_xlate(gc, np, gpio_spec, NULL); - if (err < 0) - goto err1; - mm_gc = to_of_mm_gpio_chip(gc); qe_gc = to_qe_gpio_chip(mm_gc); spin_lock_irqsave(&qe_gc->lock, flags); + err -= gc->base; if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) { qe_pin->controller = qe_gc; qe_pin->num = err; @@ -206,8 +182,6 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index) if (!err) return qe_pin; -err1: - of_node_put(gpio_np); err0: kfree(qe_pin); pr_debug("%s failed with status %d\n", __func__, err); diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c index 18e75ca19fe6..73034bd203c4 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_ic.c +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c @@ -22,7 +22,6 @@ #include <linux/stddef.h> #include <linux/sched.h> #include <linux/signal.h> -#include <linux/sysdev.h> #include <linux/device.h> #include <linux/bootmem.h> #include <linux/spinlock.h> @@ -484,13 +483,14 @@ int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high) return 0; } -static struct sysdev_class qe_ic_sysclass = { +static struct bus_type qe_ic_subsys = { .name = "qe_ic", + .dev_name = "qe_ic", }; -static struct sys_device device_qe_ic = { +static struct device device_qe_ic = { .id = 0, - .cls = &qe_ic_sysclass, + .bus = &qe_ic_subsys, }; static int __init init_qe_ic_sysfs(void) @@ -499,12 +499,12 @@ static int __init init_qe_ic_sysfs(void) printk(KERN_DEBUG "Registering qe_ic with sysfs...\n"); - rc = sysdev_class_register(&qe_ic_sysclass); + rc = subsys_system_register(&qe_ic_subsys, NULL); if (rc) { printk(KERN_ERR "Failed registering qe_ic sys class\n"); return -ENODEV; } - rc = sysdev_register(&device_qe_ic); + rc = device_register(&device_qe_ic); if (rc) { printk(KERN_ERR "Failed registering qe_ic sys device\n"); return -ENODEV; diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c index 3330feca7502..063c901b1265 100644 --- a/arch/powerpc/sysdev/uic.c +++ b/arch/powerpc/sysdev/uic.c @@ -18,7 +18,6 @@ #include <linux/stddef.h> #include <linux/sched.h> #include <linux/signal.h> -#include <linux/sysdev.h> #include <linux/device.h> #include <linux/bootmem.h> #include <linux/spinlock.h> diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c index 9518d367a64f..253dce98c16e 100644 --- a/arch/powerpc/sysdev/xics/icp-hv.c +++ b/arch/powerpc/sysdev/xics/icp-hv.c @@ -27,33 +27,50 @@ static inline unsigned int icp_hv_get_xirr(unsigned char cppr) { unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; long rc; + unsigned int ret = XICS_IRQ_SPURIOUS; rc = plpar_hcall(H_XIRR, retbuf, cppr); - if (rc != H_SUCCESS) - panic(" bad return code xirr - rc = %lx\n", rc); - return (unsigned int)retbuf[0]; -} + if (rc == H_SUCCESS) { + ret = (unsigned int)retbuf[0]; + } else { + pr_err("%s: bad return code xirr cppr=0x%x returned %ld\n", + __func__, cppr, rc); + WARN_ON_ONCE(1); + } -static inline void icp_hv_set_xirr(unsigned int value) -{ - long rc = plpar_hcall_norets(H_EOI, value); - if (rc != H_SUCCESS) - panic("bad return code EOI - rc = %ld, value=%x\n", rc, value); + return ret; } static inline void icp_hv_set_cppr(u8 value) { long rc = plpar_hcall_norets(H_CPPR, value); - if (rc != H_SUCCESS) - panic("bad return code cppr - rc = %lx\n", rc); + if (rc != H_SUCCESS) { + pr_err("%s: bad return code cppr cppr=0x%x returned %ld\n", + __func__, value, rc); + WARN_ON_ONCE(1); + } +} + +static inline void icp_hv_set_xirr(unsigned int value) +{ + long rc = plpar_hcall_norets(H_EOI, value); + if (rc != H_SUCCESS) { + pr_err("%s: bad return code eoi xirr=0x%x returned %ld\n", + __func__, value, rc); + WARN_ON_ONCE(1); + icp_hv_set_cppr(value >> 24); + } } static inline void icp_hv_set_qirr(int n_cpu , u8 value) { - long rc = plpar_hcall_norets(H_IPI, get_hard_smp_processor_id(n_cpu), - value); - if (rc != H_SUCCESS) - panic("bad return code qirr - rc = %lx\n", rc); + int hw_cpu = get_hard_smp_processor_id(n_cpu); + long rc = plpar_hcall_norets(H_IPI, hw_cpu, value); + if (rc != H_SUCCESS) { + pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x " + "returned %ld\n", __func__, n_cpu, hw_cpu, value, rc); + WARN_ON_ONCE(1); + } } static void icp_hv_eoi(struct irq_data *d) diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c index 63762c672a03..d72eda6a4c05 100644 --- a/arch/powerpc/sysdev/xics/xics-common.c +++ b/arch/powerpc/sysdev/xics/xics-common.c @@ -137,7 +137,7 @@ static void xics_request_ipi(void) * IPIs are marked IRQF_PERCPU. The handler was set in map. */ BUG_ON(request_irq(ipi, icp_ops->ipi_action, - IRQF_PERCPU, "IPI", NULL)); + IRQF_PERCPU | IRQF_NO_THREAD, "IPI", NULL)); } int __init xics_smp_probe(void) diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 03a217ae3be0..cb95eea74d3d 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -228,13 +228,11 @@ Commands:\n\ t print backtrace\n\ x exit monitor and recover\n\ X exit monitor and dont recover\n" -#ifdef CONFIG_PPC64 +#if defined(CONFIG_PPC64) && !defined(CONFIG_PPC_BOOK3E) " u dump segment table or SLB\n" -#endif -#ifdef CONFIG_PPC_STD_MMU_32 +#elif defined(CONFIG_PPC_STD_MMU_32) " u dump segment registers\n" -#endif -#ifdef CONFIG_44x +#elif defined(CONFIG_44x) || defined(CONFIG_PPC_BOOK3E) " u dump TLB\n" #endif " ? help\n" @@ -340,7 +338,7 @@ int cpus_are_in_xmon(void) static inline int unrecoverable_excp(struct pt_regs *regs) { -#if defined(CONFIG_4xx) || defined(CONFIG_BOOK3E) +#if defined(CONFIG_4xx) || defined(CONFIG_PPC_BOOK3E) /* We have no MSR_RI bit on 4xx or Book3e, so we simply return false */ return 0; #else @@ -885,13 +883,11 @@ cmds(struct pt_regs *excp) case 'u': dump_segments(); break; -#endif -#ifdef CONFIG_4xx +#elif defined(CONFIG_4xx) case 'u': dump_tlb_44x(); break; -#endif -#ifdef CONFIG_PPC_BOOK3E +#elif defined(CONFIG_PPC_BOOK3E) case 'u': dump_tlb_book3e(); break; diff --git a/arch/s390/Kbuild b/arch/s390/Kbuild index ae4b01060edd..9858476fa0fe 100644 --- a/arch/s390/Kbuild +++ b/arch/s390/Kbuild @@ -1,6 +1,7 @@ -obj-y += kernel/ -obj-y += mm/ -obj-y += crypto/ -obj-y += appldata/ -obj-y += hypfs/ -obj-y += kvm/ +obj-y += kernel/ +obj-y += mm/ +obj-$(CONFIG_KVM) += kvm/ +obj-$(CONFIG_CRYPTO_HW) += crypto/ +obj-$(CONFIG_S390_HYPFS_FS) += hypfs/ +obj-$(CONFIG_APPLDATA_BASE) += appldata/ +obj-$(CONFIG_MATHEMU) += math-emu/ diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 373679b3744a..d1727584230a 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -87,11 +87,13 @@ config S390 select HAVE_KERNEL_LZMA select HAVE_KERNEL_LZO select HAVE_KERNEL_XZ - select HAVE_GET_USER_PAGES_FAST select HAVE_ARCH_MUTEX_CPU_RELAX select HAVE_ARCH_JUMP_LABEL if !MARCH_G5 select HAVE_RCU_TABLE_FREE if SMP select ARCH_SAVE_PAGE_KEYS if HIBERNATION + select HAVE_MEMBLOCK + select HAVE_MEMBLOCK_NODE_MAP + select ARCH_DISCARD_MEMBLOCK select ARCH_INLINE_SPIN_TRYLOCK select ARCH_INLINE_SPIN_TRYLOCK_BH select ARCH_INLINE_SPIN_LOCK @@ -191,18 +193,13 @@ config HOTPLUG_CPU Say N if you want to disable CPU hotplug. config SCHED_MC - def_bool y - prompt "Multi-core scheduler support" - depends on SMP - help - Multi-core scheduler support improves the CPU scheduler's decision - making when dealing with multi-core CPU chips at a cost of slightly - increased overhead in some places. + def_bool n config SCHED_BOOK def_bool y prompt "Book scheduler support" - depends on SMP && SCHED_MC + depends on SMP + select SCHED_MC help Book scheduler support improves the CPU scheduler's decision making when dealing with machines that have several books. @@ -345,9 +342,6 @@ config WARN_DYNAMIC_STACK Say N if you are unsure. -config ARCH_POPULATES_NODE_MAP - def_bool y - comment "Kernel preemption" source "kernel/Kconfig.preempt" diff --git a/arch/s390/Makefile b/arch/s390/Makefile index 27a0b5df5ead..e9f353341693 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -99,7 +99,6 @@ core-y += arch/s390/ libs-y += arch/s390/lib/ drivers-y += drivers/s390/ -drivers-$(CONFIG_MATHEMU) += arch/s390/math-emu/ # must be linked after kernel drivers-$(CONFIG_OPROFILE) += arch/s390/oprofile/ diff --git a/arch/s390/appldata/appldata_os.c b/arch/s390/appldata/appldata_os.c index 92f1cb745d69..4de031d6b76c 100644 --- a/arch/s390/appldata/appldata_os.c +++ b/arch/s390/appldata/appldata_os.c @@ -115,21 +115,21 @@ static void appldata_get_os_data(void *data) j = 0; for_each_online_cpu(i) { os_data->os_cpu[j].per_cpu_user = - cputime_to_jiffies(kstat_cpu(i).cpustat.user); + cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_USER]); os_data->os_cpu[j].per_cpu_nice = - cputime_to_jiffies(kstat_cpu(i).cpustat.nice); + cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_NICE]); os_data->os_cpu[j].per_cpu_system = - cputime_to_jiffies(kstat_cpu(i).cpustat.system); + cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_SYSTEM]); os_data->os_cpu[j].per_cpu_idle = - cputime_to_jiffies(kstat_cpu(i).cpustat.idle); + cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_IDLE]); os_data->os_cpu[j].per_cpu_irq = - cputime_to_jiffies(kstat_cpu(i).cpustat.irq); + cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_IRQ]); os_data->os_cpu[j].per_cpu_softirq = - cputime_to_jiffies(kstat_cpu(i).cpustat.softirq); + cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_SOFTIRQ]); os_data->os_cpu[j].per_cpu_iowait = - cputime_to_jiffies(kstat_cpu(i).cpustat.iowait); + cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_IOWAIT]); os_data->os_cpu[j].per_cpu_steal = - cputime_to_jiffies(kstat_cpu(i).cpustat.steal); + cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_STEAL]); os_data->os_cpu[j].cpu_id = i; j++; } diff --git a/arch/s390/boot/Makefile b/arch/s390/boot/Makefile index 635d677d3281..f2737a005afc 100644 --- a/arch/s390/boot/Makefile +++ b/arch/s390/boot/Makefile @@ -23,4 +23,4 @@ $(obj)/compressed/vmlinux: FORCE install: $(CONFIGURE) $(obj)/image sh -x $(srctree)/$(obj)/install.sh $(KERNELRELEASE) $(obj)/image \ - System.map Kerntypes "$(INSTALL_PATH)" + System.map "$(INSTALL_PATH)" diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c index 481f4f76f664..8a2a887478cc 100644 --- a/arch/s390/hypfs/inode.c +++ b/arch/s390/hypfs/inode.c @@ -97,7 +97,7 @@ static void hypfs_delete_tree(struct dentry *root) } } -static struct inode *hypfs_make_inode(struct super_block *sb, int mode) +static struct inode *hypfs_make_inode(struct super_block *sb, umode_t mode) { struct inode *ret = new_inode(sb); @@ -107,7 +107,7 @@ static struct inode *hypfs_make_inode(struct super_block *sb, int mode) ret->i_uid = hypfs_info->uid; ret->i_gid = hypfs_info->gid; ret->i_atime = ret->i_mtime = ret->i_ctime = CURRENT_TIME; - if (mode & S_IFDIR) + if (S_ISDIR(mode)) set_nlink(ret, 2); } return ret; @@ -259,9 +259,9 @@ static int hypfs_parse_options(char *options, struct super_block *sb) return 0; } -static int hypfs_show_options(struct seq_file *s, struct vfsmount *mnt) +static int hypfs_show_options(struct seq_file *s, struct dentry *root) { - struct hypfs_sb_info *hypfs_info = mnt->mnt_sb->s_fs_info; + struct hypfs_sb_info *hypfs_info = root->d_sb->s_fs_info; seq_printf(s, ",uid=%u", hypfs_info->uid); seq_printf(s, ",gid=%u", hypfs_info->gid); @@ -333,7 +333,7 @@ static void hypfs_kill_super(struct super_block *sb) static struct dentry *hypfs_create_file(struct super_block *sb, struct dentry *parent, const char *name, - char *data, mode_t mode) + char *data, umode_t mode) { struct dentry *dentry; struct inode *inode; @@ -350,13 +350,13 @@ static struct dentry *hypfs_create_file(struct super_block *sb, dentry = ERR_PTR(-ENOMEM); goto fail; } - if (mode & S_IFREG) { + if (S_ISREG(mode)) { inode->i_fop = &hypfs_file_ops; if (data) inode->i_size = strlen(data); else inode->i_size = 0; - } else if (mode & S_IFDIR) { + } else if (S_ISDIR(mode)) { inode->i_op = &simple_dir_inode_operations; inode->i_fop = &simple_dir_operations; inc_nlink(parent->d_inode); diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h index 081434878296..c23c3900c304 100644 --- a/arch/s390/include/asm/cputime.h +++ b/arch/s390/include/asm/cputime.h @@ -16,114 +16,100 @@ /* We want to use full resolution of the CPU timer: 2**-12 micro-seconds. */ -typedef unsigned long long cputime_t; -typedef unsigned long long cputime64_t; +typedef unsigned long long __nocast cputime_t; +typedef unsigned long long __nocast cputime64_t; -#ifndef __s390x__ - -static inline unsigned int -__div(unsigned long long n, unsigned int base) +static inline unsigned long __div(unsigned long long n, unsigned long base) { +#ifndef __s390x__ register_pair rp; rp.pair = n >> 1; asm ("dr %0,%1" : "+d" (rp) : "d" (base >> 1)); return rp.subreg.odd; +#else /* __s390x__ */ + return n / base; +#endif /* __s390x__ */ } -#else /* __s390x__ */ +#define cputime_one_jiffy jiffies_to_cputime(1) + +/* + * Convert cputime to jiffies and back. + */ +static inline unsigned long cputime_to_jiffies(const cputime_t cputime) +{ + return __div((__force unsigned long long) cputime, 4096000000ULL / HZ); +} -static inline unsigned int -__div(unsigned long long n, unsigned int base) +static inline cputime_t jiffies_to_cputime(const unsigned int jif) { - return n / base; + return (__force cputime_t)(jif * (4096000000ULL / HZ)); } -#endif /* __s390x__ */ +static inline u64 cputime64_to_jiffies64(cputime64_t cputime) +{ + unsigned long long jif = (__force unsigned long long) cputime; + do_div(jif, 4096000000ULL / HZ); + return jif; +} -#define cputime_zero (0ULL) -#define cputime_one_jiffy jiffies_to_cputime(1) -#define cputime_max ((~0UL >> 1) - 1) -#define cputime_add(__a, __b) ((__a) + (__b)) -#define cputime_sub(__a, __b) ((__a) - (__b)) -#define cputime_div(__a, __n) ({ \ - unsigned long long __div = (__a); \ - do_div(__div,__n); \ - __div; \ -}) -#define cputime_halve(__a) ((__a) >> 1) -#define cputime_eq(__a, __b) ((__a) == (__b)) -#define cputime_gt(__a, __b) ((__a) > (__b)) -#define cputime_ge(__a, __b) ((__a) >= (__b)) -#define cputime_lt(__a, __b) ((__a) < (__b)) -#define cputime_le(__a, __b) ((__a) <= (__b)) -#define cputime_to_jiffies(__ct) (__div((__ct), 4096000000ULL / HZ)) -#define cputime_to_scaled(__ct) (__ct) -#define jiffies_to_cputime(__hz) ((cputime_t)(__hz) * (4096000000ULL / HZ)) - -#define cputime64_zero (0ULL) -#define cputime64_add(__a, __b) ((__a) + (__b)) -#define cputime_to_cputime64(__ct) (__ct) - -static inline u64 -cputime64_to_jiffies64(cputime64_t cputime) -{ - do_div(cputime, 4096000000ULL / HZ); - return cputime; +static inline cputime64_t jiffies64_to_cputime64(const u64 jif) +{ + return (__force cputime64_t)(jif * (4096000000ULL / HZ)); } /* * Convert cputime to microseconds and back. */ -static inline unsigned int -cputime_to_usecs(const cputime_t cputime) +static inline unsigned int cputime_to_usecs(const cputime_t cputime) { - return cputime_div(cputime, 4096); + return (__force unsigned long long) cputime >> 12; } -static inline cputime_t -usecs_to_cputime(const unsigned int m) +static inline cputime_t usecs_to_cputime(const unsigned int m) { - return (cputime_t) m * 4096; + return (__force cputime_t)(m * 4096ULL); } +#define usecs_to_cputime64(m) usecs_to_cputime(m) + /* * Convert cputime to milliseconds and back. */ -static inline unsigned int -cputime_to_secs(const cputime_t cputime) +static inline unsigned int cputime_to_secs(const cputime_t cputime) { - return __div(cputime, 2048000000) >> 1; + return __div((__force unsigned long long) cputime, 2048000000) >> 1; } -static inline cputime_t -secs_to_cputime(const unsigned int s) +static inline cputime_t secs_to_cputime(const unsigned int s) { - return (cputime_t) s * 4096000000ULL; + return (__force cputime_t)(s * 4096000000ULL); } /* * Convert cputime to timespec and back. */ -static inline cputime_t -timespec_to_cputime(const struct timespec *value) +static inline cputime_t timespec_to_cputime(const struct timespec *value) { - return value->tv_nsec * 4096 / 1000 + (u64) value->tv_sec * 4096000000ULL; + unsigned long long ret = value->tv_sec * 4096000000ULL; + return (__force cputime_t)(ret + value->tv_nsec * 4096 / 1000); } -static inline void -cputime_to_timespec(const cputime_t cputime, struct timespec *value) +static inline void cputime_to_timespec(const cputime_t cputime, + struct timespec *value) { + unsigned long long __cputime = (__force unsigned long long) cputime; #ifndef __s390x__ register_pair rp; - rp.pair = cputime >> 1; + rp.pair = __cputime >> 1; asm ("dr %0,%1" : "+d" (rp) : "d" (2048000000UL)); value->tv_nsec = rp.subreg.even * 1000 / 4096; value->tv_sec = rp.subreg.odd; #else - value->tv_nsec = (cputime % 4096000000ULL) * 1000 / 4096; - value->tv_sec = cputime / 4096000000ULL; + value->tv_nsec = (__cputime % 4096000000ULL) * 1000 / 4096; + value->tv_sec = __cputime / 4096000000ULL; #endif } @@ -132,50 +118,52 @@ cputime_to_timespec(const cputime_t cputime, struct timespec *value) * Since cputime and timeval have the same resolution (microseconds) * this is easy. */ -static inline cputime_t -timeval_to_cputime(const struct timeval *value) +static inline cputime_t timeval_to_cputime(const struct timeval *value) { - return value->tv_usec * 4096 + (u64) value->tv_sec * 4096000000ULL; + unsigned long long ret = value->tv_sec * 4096000000ULL; + return (__force cputime_t)(ret + value->tv_usec * 4096ULL); } -static inline void -cputime_to_timeval(const cputime_t cputime, struct timeval *value) +static inline void cputime_to_timeval(const cputime_t cputime, + struct timeval *value) { + unsigned long long __cputime = (__force unsigned long long) cputime; #ifndef __s390x__ register_pair rp; - rp.pair = cputime >> 1; + rp.pair = __cputime >> 1; asm ("dr %0,%1" : "+d" (rp) : "d" (2048000000UL)); value->tv_usec = rp.subreg.even / 4096; value->tv_sec = rp.subreg.odd; #else - value->tv_usec = (cputime % 4096000000ULL) / 4096; - value->tv_sec = cputime / 4096000000ULL; + value->tv_usec = (__cputime % 4096000000ULL) / 4096; + value->tv_sec = __cputime / 4096000000ULL; #endif } /* * Convert cputime to clock and back. */ -static inline clock_t -cputime_to_clock_t(cputime_t cputime) +static inline clock_t cputime_to_clock_t(cputime_t cputime) { - return cputime_div(cputime, 4096000000ULL / USER_HZ); + unsigned long long clock = (__force unsigned long long) cputime; + do_div(clock, 4096000000ULL / USER_HZ); + return clock; } -static inline cputime_t -clock_t_to_cputime(unsigned long x) +static inline cputime_t clock_t_to_cputime(unsigned long x) { - return (cputime_t) x * (4096000000ULL / USER_HZ); + return (__force cputime_t)(x * (4096000000ULL / USER_HZ)); } /* * Convert cputime64 to clock. */ -static inline clock_t -cputime64_to_clock_t(cputime64_t cputime) +static inline clock_t cputime64_to_clock_t(cputime64_t cputime) { - return cputime_div(cputime, 4096000000ULL / USER_HZ); + unsigned long long clock = (__force unsigned long long) cputime; + do_div(clock, 4096000000ULL / USER_HZ); + return clock; } struct s390_idle_data { diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h index 18124b75a7ab..9d88db1f55d0 100644 --- a/arch/s390/include/asm/debug.h +++ b/arch/s390/include/asm/debug.h @@ -73,7 +73,7 @@ typedef struct debug_info { struct dentry* debugfs_entries[DEBUG_MAX_VIEWS]; struct debug_view* views[DEBUG_MAX_VIEWS]; char name[DEBUG_MAX_NAME_LEN]; - mode_t mode; + umode_t mode; } debug_info_t; typedef int (debug_header_proc_t) (debug_info_t* id, @@ -124,7 +124,7 @@ debug_info_t *debug_register(const char *name, int pages, int nr_areas, int buf_size); debug_info_t *debug_register_mode(const char *name, int pages, int nr_areas, - int buf_size, mode_t mode, uid_t uid, + int buf_size, umode_t mode, uid_t uid, gid_t gid); void debug_unregister(debug_info_t* id); diff --git a/arch/s390/include/asm/kdebug.h b/arch/s390/include/asm/kdebug.h index 40db27cd6e60..5c1abd47612a 100644 --- a/arch/s390/include/asm/kdebug.h +++ b/arch/s390/include/asm/kdebug.h @@ -22,6 +22,6 @@ enum die_val { DIE_NMI_IPI, }; -extern void die(const char *, struct pt_regs *, long); +extern void die(struct pt_regs *, const char *); #endif diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h index 9e13c7d56cc1..707f2306725b 100644 --- a/arch/s390/include/asm/lowcore.h +++ b/arch/s390/include/asm/lowcore.h @@ -97,47 +97,52 @@ struct _lowcore { __u32 gpregs_save_area[16]; /* 0x0180 */ __u32 cregs_save_area[16]; /* 0x01c0 */ + /* Save areas. */ + __u32 save_area_sync[8]; /* 0x0200 */ + __u32 save_area_async[8]; /* 0x0220 */ + __u32 save_area_restart[1]; /* 0x0240 */ + __u8 pad_0x0244[0x0248-0x0244]; /* 0x0244 */ + /* Return psws. */ - __u32 save_area[16]; /* 0x0200 */ - psw_t return_psw; /* 0x0240 */ - psw_t return_mcck_psw; /* 0x0248 */ + psw_t return_psw; /* 0x0248 */ + psw_t return_mcck_psw; /* 0x0250 */ /* CPU time accounting values */ - __u64 sync_enter_timer; /* 0x0250 */ - __u64 async_enter_timer; /* 0x0258 */ - __u64 mcck_enter_timer; /* 0x0260 */ - __u64 exit_timer; /* 0x0268 */ - __u64 user_timer; /* 0x0270 */ - __u64 system_timer; /* 0x0278 */ - __u64 steal_timer; /* 0x0280 */ - __u64 last_update_timer; /* 0x0288 */ - __u64 last_update_clock; /* 0x0290 */ + __u64 sync_enter_timer; /* 0x0258 */ + __u64 async_enter_timer; /* 0x0260 */ + __u64 mcck_enter_timer; /* 0x0268 */ + __u64 exit_timer; /* 0x0270 */ + __u64 user_timer; /* 0x0278 */ + __u64 system_timer; /* 0x0280 */ + __u64 steal_timer; /* 0x0288 */ + __u64 last_update_timer; /* 0x0290 */ + __u64 last_update_clock; /* 0x0298 */ /* Current process. */ - __u32 current_task; /* 0x0298 */ - __u32 thread_info; /* 0x029c */ - __u32 kernel_stack; /* 0x02a0 */ + __u32 current_task; /* 0x02a0 */ + __u32 thread_info; /* 0x02a4 */ + __u32 kernel_stack; /* 0x02a8 */ /* Interrupt and panic stack. */ - __u32 async_stack; /* 0x02a4 */ - __u32 panic_stack; /* 0x02a8 */ + __u32 async_stack; /* 0x02ac */ + __u32 panic_stack; /* 0x02b0 */ /* Address space pointer. */ - __u32 kernel_asce; /* 0x02ac */ - __u32 user_asce; /* 0x02b0 */ - __u32 current_pid; /* 0x02b4 */ + __u32 kernel_asce; /* 0x02b4 */ + __u32 user_asce; /* 0x02b8 */ + __u32 current_pid; /* 0x02bc */ /* SMP info area */ - __u32 cpu_nr; /* 0x02b8 */ - __u32 softirq_pending; /* 0x02bc */ - __u32 percpu_offset; /* 0x02c0 */ - __u32 ext_call_fast; /* 0x02c4 */ - __u64 int_clock; /* 0x02c8 */ - __u64 mcck_clock; /* 0x02d0 */ - __u64 clock_comparator; /* 0x02d8 */ - __u32 machine_flags; /* 0x02e0 */ - __u32 ftrace_func; /* 0x02e4 */ - __u8 pad_0x02e8[0x0300-0x02e8]; /* 0x02e8 */ + __u32 cpu_nr; /* 0x02c0 */ + __u32 softirq_pending; /* 0x02c4 */ + __u32 percpu_offset; /* 0x02c8 */ + __u32 ext_call_fast; /* 0x02cc */ + __u64 int_clock; /* 0x02d0 */ + __u64 mcck_clock; /* 0x02d8 */ + __u64 clock_comparator; /* 0x02e0 */ + __u32 machine_flags; /* 0x02e8 */ + __u32 ftrace_func; /* 0x02ec */ + __u8 pad_0x02f8[0x0300-0x02f0]; /* 0x02f0 */ /* Interrupt response block */ __u8 irb[64]; /* 0x0300 */ @@ -229,57 +234,62 @@ struct _lowcore { psw_t mcck_new_psw; /* 0x01e0 */ psw_t io_new_psw; /* 0x01f0 */ - /* Entry/exit save area & return psws. */ - __u64 save_area[16]; /* 0x0200 */ - psw_t return_psw; /* 0x0280 */ - psw_t return_mcck_psw; /* 0x0290 */ + /* Save areas. */ + __u64 save_area_sync[8]; /* 0x0200 */ + __u64 save_area_async[8]; /* 0x0240 */ + __u64 save_area_restart[1]; /* 0x0280 */ + __u8 pad_0x0288[0x0290-0x0288]; /* 0x0288 */ + + /* Return psws. */ + psw_t return_psw; /* 0x0290 */ + psw_t return_mcck_psw; /* 0x02a0 */ /* CPU accounting and timing values. */ - __u64 sync_enter_timer; /* 0x02a0 */ - __u64 async_enter_timer; /* 0x02a8 */ - __u64 mcck_enter_timer; /* 0x02b0 */ - __u64 exit_timer; /* 0x02b8 */ - __u64 user_timer; /* 0x02c0 */ - __u64 system_timer; /* 0x02c8 */ - __u64 steal_timer; /* 0x02d0 */ - __u64 last_update_timer; /* 0x02d8 */ - __u64 last_update_clock; /* 0x02e0 */ + __u64 sync_enter_timer; /* 0x02b0 */ + __u64 async_enter_timer; /* 0x02b8 */ + __u64 mcck_enter_timer; /* 0x02c0 */ + __u64 exit_timer; /* 0x02c8 */ + __u64 user_timer; /* 0x02d0 */ + __u64 system_timer; /* 0x02d8 */ + __u64 steal_timer; /* 0x02e0 */ + __u64 last_update_timer; /* 0x02e8 */ + __u64 last_update_clock; /* 0x02f0 */ /* Current process. */ - __u64 current_task; /* 0x02e8 */ - __u64 thread_info; /* 0x02f0 */ - __u64 kernel_stack; /* 0x02f8 */ + __u64 current_task; /* 0x02f8 */ + __u64 thread_info; /* 0x0300 */ + __u64 kernel_stack; /* 0x0308 */ /* Interrupt and panic stack. */ - __u64 async_stack; /* 0x0300 */ - __u64 panic_stack; /* 0x0308 */ + __u64 async_stack; /* 0x0310 */ + __u64 panic_stack; /* 0x0318 */ /* Address space pointer. */ - __u64 kernel_asce; /* 0x0310 */ - __u64 user_asce; /* 0x0318 */ - __u64 current_pid; /* 0x0320 */ + __u64 kernel_asce; /* 0x0320 */ + __u64 user_asce; /* 0x0328 */ + __u64 current_pid; /* 0x0330 */ /* SMP info area */ - __u32 cpu_nr; /* 0x0328 */ - __u32 softirq_pending; /* 0x032c */ - __u64 percpu_offset; /* 0x0330 */ - __u64 ext_call_fast; /* 0x0338 */ - __u64 int_clock; /* 0x0340 */ - __u64 mcck_clock; /* 0x0348 */ - __u64 clock_comparator; /* 0x0350 */ - __u64 vdso_per_cpu_data; /* 0x0358 */ - __u64 machine_flags; /* 0x0360 */ - __u64 ftrace_func; /* 0x0368 */ - __u64 gmap; /* 0x0370 */ - __u64 cmf_hpp; /* 0x0378 */ + __u32 cpu_nr; /* 0x0338 */ + __u32 softirq_pending; /* 0x033c */ + __u64 percpu_offset; /* 0x0340 */ + __u64 ext_call_fast; /* 0x0348 */ + __u64 int_clock; /* 0x0350 */ + __u64 mcck_clock; /* 0x0358 */ + __u64 clock_comparator; /* 0x0360 */ + __u64 vdso_per_cpu_data; /* 0x0368 */ + __u64 machine_flags; /* 0x0370 */ + __u64 ftrace_func; /* 0x0378 */ + __u64 gmap; /* 0x0380 */ + __u8 pad_0x0388[0x0400-0x0388]; /* 0x0388 */ /* Interrupt response block. */ - __u8 irb[64]; /* 0x0380 */ + __u8 irb[64]; /* 0x0400 */ /* Per cpu primary space access list */ - __u32 paste[16]; /* 0x03c0 */ + __u32 paste[16]; /* 0x0440 */ - __u8 pad_0x0400[0x0e00-0x0400]; /* 0x0400 */ + __u8 pad_0x0480[0x0e00-0x0480]; /* 0x0480 */ /* * 0xe00 contains the address of the IPL Parameter Information diff --git a/arch/s390/include/asm/percpu.h b/arch/s390/include/asm/percpu.h index 5325c89a5843..0fbd1899c7b0 100644 --- a/arch/s390/include/asm/percpu.h +++ b/arch/s390/include/asm/percpu.h @@ -19,7 +19,7 @@ #define ARCH_NEEDS_WEAK_PER_CPU #endif -#define arch_irqsafe_cpu_to_op(pcp, val, op) \ +#define arch_this_cpu_to_op(pcp, val, op) \ do { \ typedef typeof(pcp) pcp_op_T__; \ pcp_op_T__ old__, new__, prev__; \ @@ -41,27 +41,27 @@ do { \ preempt_enable(); \ } while (0) -#define irqsafe_cpu_add_1(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, +) -#define irqsafe_cpu_add_2(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, +) -#define irqsafe_cpu_add_4(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, +) -#define irqsafe_cpu_add_8(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, +) +#define this_cpu_add_1(pcp, val) arch_this_cpu_to_op(pcp, val, +) +#define this_cpu_add_2(pcp, val) arch_this_cpu_to_op(pcp, val, +) +#define this_cpu_add_4(pcp, val) arch_this_cpu_to_op(pcp, val, +) +#define this_cpu_add_8(pcp, val) arch_this_cpu_to_op(pcp, val, +) -#define irqsafe_cpu_and_1(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, &) -#define irqsafe_cpu_and_2(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, &) -#define irqsafe_cpu_and_4(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, &) -#define irqsafe_cpu_and_8(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, &) +#define this_cpu_and_1(pcp, val) arch_this_cpu_to_op(pcp, val, &) +#define this_cpu_and_2(pcp, val) arch_this_cpu_to_op(pcp, val, &) +#define this_cpu_and_4(pcp, val) arch_this_cpu_to_op(pcp, val, &) +#define this_cpu_and_8(pcp, val) arch_this_cpu_to_op(pcp, val, &) -#define irqsafe_cpu_or_1(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, |) -#define irqsafe_cpu_or_2(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, |) -#define irqsafe_cpu_or_4(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, |) -#define irqsafe_cpu_or_8(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, |) +#define this_cpu_or_1(pcp, val) arch_this_cpu_to_op(pcp, val, |) +#define this_cpu_or_2(pcp, val) arch_this_cpu_to_op(pcp, val, |) +#define this_cpu_or_4(pcp, val) arch_this_cpu_to_op(pcp, val, |) +#define this_cpu_or_8(pcp, val) arch_this_cpu_to_op(pcp, val, |) -#define irqsafe_cpu_xor_1(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, ^) -#define irqsafe_cpu_xor_2(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, ^) -#define irqsafe_cpu_xor_4(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, ^) -#define irqsafe_cpu_xor_8(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, ^) +#define this_cpu_xor_1(pcp, val) arch_this_cpu_to_op(pcp, val, ^) +#define this_cpu_xor_2(pcp, val) arch_this_cpu_to_op(pcp, val, ^) +#define this_cpu_xor_4(pcp, val) arch_this_cpu_to_op(pcp, val, ^) +#define this_cpu_xor_8(pcp, val) arch_this_cpu_to_op(pcp, val, ^) -#define arch_irqsafe_cpu_cmpxchg(pcp, oval, nval) \ +#define arch_this_cpu_cmpxchg(pcp, oval, nval) \ ({ \ typedef typeof(pcp) pcp_op_T__; \ pcp_op_T__ ret__; \ @@ -79,10 +79,10 @@ do { \ ret__; \ }) -#define irqsafe_cpu_cmpxchg_1(pcp, oval, nval) arch_irqsafe_cpu_cmpxchg(pcp, oval, nval) -#define irqsafe_cpu_cmpxchg_2(pcp, oval, nval) arch_irqsafe_cpu_cmpxchg(pcp, oval, nval) -#define irqsafe_cpu_cmpxchg_4(pcp, oval, nval) arch_irqsafe_cpu_cmpxchg(pcp, oval, nval) -#define irqsafe_cpu_cmpxchg_8(pcp, oval, nval) arch_irqsafe_cpu_cmpxchg(pcp, oval, nval) +#define this_cpu_cmpxchg_1(pcp, oval, nval) arch_this_cpu_cmpxchg(pcp, oval, nval) +#define this_cpu_cmpxchg_2(pcp, oval, nval) arch_this_cpu_cmpxchg(pcp, oval, nval) +#define this_cpu_cmpxchg_4(pcp, oval, nval) arch_this_cpu_cmpxchg(pcp, oval, nval) +#define this_cpu_cmpxchg_8(pcp, oval, nval) arch_this_cpu_cmpxchg(pcp, oval, nval) #include <asm-generic/percpu.h> diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 524d23b8610c..011358c1b18e 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -128,28 +128,11 @@ static inline int is_zero_pfn(unsigned long pfn) * effect, this also makes sure that 64 bit module code cannot be used * as system call address. */ - extern unsigned long VMALLOC_START; +extern unsigned long VMALLOC_END; +extern struct page *vmemmap; -#ifndef __s390x__ -#define VMALLOC_SIZE (96UL << 20) -#define VMALLOC_END 0x7e000000UL -#define VMEM_MAP_END 0x80000000UL -#else /* __s390x__ */ -#define VMALLOC_SIZE (128UL << 30) -#define VMALLOC_END 0x3e000000000UL -#define VMEM_MAP_END 0x40000000000UL -#endif /* __s390x__ */ - -/* - * VMEM_MAX_PHYS is the highest physical address that can be added to the 1:1 - * mapping. This needs to be calculated at compile time since the size of the - * VMEM_MAP is static but the size of struct page can change. - */ -#define VMEM_MAX_PAGES ((VMEM_MAP_END - VMALLOC_END) / sizeof(struct page)) -#define VMEM_MAX_PFN min(VMALLOC_START >> PAGE_SHIFT, VMEM_MAX_PAGES) -#define VMEM_MAX_PHYS ((VMEM_MAX_PFN << PAGE_SHIFT) & ~((16 << 20) - 1)) -#define vmemmap ((struct page *) VMALLOC_END) +#define VMEM_MAX_PHYS ((unsigned long) vmemmap) /* * A 31 bit pagetable entry of S390 has following format: @@ -599,10 +582,10 @@ static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste) skey = page_get_storage_key(address); bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED); /* Clear page changed & referenced bit in the storage key */ - if (bits) { - skey ^= bits; - page_set_storage_key(address, skey, 1); - } + if (bits & _PAGE_CHANGED) + page_set_storage_key(address, skey ^ bits, 1); + else if (bits) + page_reset_referenced(address); /* Transfer page changed & referenced bit to guest bits in pgste */ pgste_val(pgste) |= bits << 48; /* RCP_GR_BIT & RCP_GC_BIT */ /* Get host changed & referenced bits from pgste */ diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h index 5f33d37d032c..27272f6a14c2 100644 --- a/arch/s390/include/asm/processor.h +++ b/arch/s390/include/asm/processor.h @@ -80,8 +80,6 @@ struct thread_struct { unsigned int acrs[NUM_ACRS]; unsigned long ksp; /* kernel stack pointer */ mm_segment_t mm_segment; - unsigned long prot_addr; /* address of protection-excep. */ - unsigned int trap_no; unsigned long gmap_addr; /* address of last gmap fault. */ struct per_regs per_user; /* User specified PER registers */ struct per_event per_event; /* Cause of the last PER trap */ diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h index a65846340d51..56da355678f4 100644 --- a/arch/s390/include/asm/ptrace.h +++ b/arch/s390/include/asm/ptrace.h @@ -324,7 +324,8 @@ struct pt_regs psw_t psw; unsigned long gprs[NUM_GPRS]; unsigned long orig_gpr2; - unsigned int svc_code; + unsigned int int_code; + unsigned long int_parm_long; }; /* diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h index e63d13dd3bf5..d75c8e78f7e3 100644 --- a/arch/s390/include/asm/qdio.h +++ b/arch/s390/include/asm/qdio.h @@ -352,7 +352,7 @@ typedef void qdio_handler_t(struct ccw_device *, unsigned int, int, * @no_output_qs: number of output queues * @input_handler: handler to be called for input queues * @output_handler: handler to be called for output queues - * @queue_start_poll: polling handlers (one per input queue or NULL) + * @queue_start_poll_array: polling handlers (one per input queue or NULL) * @int_parm: interruption parameter * @input_sbal_addr_array: address of no_input_qs * 128 pointers * @output_sbal_addr_array: address of no_output_qs * 128 pointers @@ -372,7 +372,8 @@ struct qdio_initialize { unsigned int no_output_qs; qdio_handler_t *input_handler; qdio_handler_t *output_handler; - void (**queue_start_poll) (struct ccw_device *, int, unsigned long); + void (**queue_start_poll_array) (struct ccw_device *, int, + unsigned long); int scan_threshold; unsigned long int_parm; void **input_sbal_addr_array; diff --git a/arch/s390/include/asm/sigp.h b/arch/s390/include/asm/sigp.h index e3bffd4e2d66..7040b8567cd0 100644 --- a/arch/s390/include/asm/sigp.h +++ b/arch/s390/include/asm/sigp.h @@ -56,6 +56,7 @@ enum { ec_schedule = 0, ec_call_function, ec_call_function_single, + ec_stop_cpu, }; /* diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h index ab47a69fdf07..c32e9123b40c 100644 --- a/arch/s390/include/asm/smp.h +++ b/arch/s390/include/asm/smp.h @@ -23,7 +23,6 @@ extern void __cpu_die (unsigned int cpu); extern int __cpu_up (unsigned int cpu); extern struct mutex smp_cpu_state_mutex; -extern int smp_cpu_polarization[]; extern void arch_send_call_function_single_ipi(int cpu); extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); diff --git a/arch/s390/include/asm/socket.h b/arch/s390/include/asm/socket.h index fdff1e995c73..67b5c1b14b51 100644 --- a/arch/s390/include/asm/socket.h +++ b/arch/s390/include/asm/socket.h @@ -70,4 +70,7 @@ #define SO_RXQ_OVFL 40 +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS + #endif /* _ASM_SOCKET_H */ diff --git a/arch/s390/include/asm/sparsemem.h b/arch/s390/include/asm/sparsemem.h index 545d219e6a2d..0fb34027d3f6 100644 --- a/arch/s390/include/asm/sparsemem.h +++ b/arch/s390/include/asm/sparsemem.h @@ -4,8 +4,8 @@ #ifdef CONFIG_64BIT #define SECTION_SIZE_BITS 28 -#define MAX_PHYSADDR_BITS 42 -#define MAX_PHYSMEM_BITS 42 +#define MAX_PHYSADDR_BITS 46 +#define MAX_PHYSMEM_BITS 46 #else diff --git a/arch/s390/include/asm/syscall.h b/arch/s390/include/asm/syscall.h index b239ff53b189..fb214dd9b7e0 100644 --- a/arch/s390/include/asm/syscall.h +++ b/arch/s390/include/asm/syscall.h @@ -27,7 +27,7 @@ static inline long syscall_get_nr(struct task_struct *task, struct pt_regs *regs) { return test_tsk_thread_flag(task, TIF_SYSCALL) ? - (regs->svc_code & 0xffff) : -1; + (regs->int_code & 0xffff) : -1; } static inline void syscall_rollback(struct task_struct *task, diff --git a/arch/s390/include/asm/system.h b/arch/s390/include/asm/system.h index ef573c1d71a7..d73cc6b60000 100644 --- a/arch/s390/include/asm/system.h +++ b/arch/s390/include/asm/system.h @@ -20,8 +20,6 @@ struct task_struct; -extern int sysctl_userprocess_debug; - extern struct task_struct *__switch_to(void *, void *); extern void update_per_regs(struct task_struct *task); diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h index a23183423b14..a73038155e0d 100644 --- a/arch/s390/include/asm/thread_info.h +++ b/arch/s390/include/asm/thread_info.h @@ -102,7 +102,6 @@ static inline struct thread_info *current_thread_info(void) #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 19 /* restore signal mask in do_signal() */ #define TIF_SINGLE_STEP 20 /* This task is single stepped */ -#define TIF_FREEZE 21 /* thread is freezing for suspend */ #define _TIF_SYSCALL (1<<TIF_SYSCALL) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) @@ -119,7 +118,6 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) #define _TIF_31BIT (1<<TIF_31BIT) #define _TIF_SINGLE_STEP (1<<TIF_SINGLE_STEP) -#define _TIF_FREEZE (1<<TIF_FREEZE) #ifdef CONFIG_64BIT #define is_32bit_task() (test_thread_flag(TIF_31BIT)) diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h index 005d77d8ae2a..0837de80c351 100644 --- a/arch/s390/include/asm/topology.h +++ b/arch/s390/include/asm/topology.h @@ -4,6 +4,10 @@ #include <linux/cpumask.h> #include <asm/sysinfo.h> +struct cpu; + +#ifdef CONFIG_SCHED_BOOK + extern unsigned char cpu_core_id[NR_CPUS]; extern cpumask_t cpu_core_map[NR_CPUS]; @@ -16,8 +20,6 @@ static inline const struct cpumask *cpu_coregroup_mask(int cpu) #define topology_core_cpumask(cpu) (&cpu_core_map[cpu]) #define mc_capable() (1) -#ifdef CONFIG_SCHED_BOOK - extern unsigned char cpu_book_id[NR_CPUS]; extern cpumask_t cpu_book_map[NR_CPUS]; @@ -29,19 +31,45 @@ static inline const struct cpumask *cpu_book_mask(int cpu) #define topology_book_id(cpu) (cpu_book_id[cpu]) #define topology_book_cpumask(cpu) (&cpu_book_map[cpu]) -#endif /* CONFIG_SCHED_BOOK */ - +int topology_cpu_init(struct cpu *); int topology_set_cpu_management(int fc); void topology_schedule_update(void); void store_topology(struct sysinfo_15_1_x *info); +void topology_expect_change(void); + +#else /* CONFIG_SCHED_BOOK */ + +static inline void topology_schedule_update(void) { } +static inline int topology_cpu_init(struct cpu *cpu) { return 0; } +static inline void topology_expect_change(void) { } -#define POLARIZATION_UNKNWN (-1) +#endif /* CONFIG_SCHED_BOOK */ + +#define POLARIZATION_UNKNOWN (-1) #define POLARIZATION_HRZ (0) #define POLARIZATION_VL (1) #define POLARIZATION_VM (2) #define POLARIZATION_VH (3) -#ifdef CONFIG_SMP +extern int cpu_polarization[]; + +static inline void cpu_set_polarization(int cpu, int val) +{ +#ifdef CONFIG_SCHED_BOOK + cpu_polarization[cpu] = val; +#endif +} + +static inline int cpu_read_polarization(int cpu) +{ +#ifdef CONFIG_SCHED_BOOK + return cpu_polarization[cpu]; +#else + return POLARIZATION_HRZ; +#endif +} + +#ifdef CONFIG_SCHED_BOOK void s390_init_cpu_topology(void); #else static inline void s390_init_cpu_topology(void) diff --git a/arch/s390/include/asm/types.h b/arch/s390/include/asm/types.h index eeb52ccf499f..05ebbcdbbf6b 100644 --- a/arch/s390/include/asm/types.h +++ b/arch/s390/include/asm/types.h @@ -13,8 +13,6 @@ #ifndef __ASSEMBLY__ -typedef unsigned short umode_t; - /* A address type so that arithmetic can be done on it & it can be upgraded to 64 bit when necessary */ diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h index 58de4c91c333..8a8008fe7b8f 100644 --- a/arch/s390/include/asm/unistd.h +++ b/arch/s390/include/asm/unistd.h @@ -398,6 +398,7 @@ #define __ARCH_WANT_SYS_SIGNAL #define __ARCH_WANT_SYS_UTIME #define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_IPC #define __ARCH_WANT_SYS_FADVISE64 #define __ARCH_WANT_SYS_GETPGRP #define __ARCH_WANT_SYS_LLSEEK diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index dd4f07640919..7d9ec924e7e7 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -32,7 +32,8 @@ extra-y += head.o init_task.o vmlinux.lds extra-y += $(if $(CONFIG_64BIT),head64.o,head31.o) obj-$(CONFIG_MODULES) += s390_ksyms.o module.o -obj-$(CONFIG_SMP) += smp.o topology.o +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_SCHED_BOOK) += topology.o obj-$(CONFIG_SMP) += $(if $(CONFIG_64BIT),switch_cpu64.o, \ switch_cpu.o) obj-$(CONFIG_HIBERNATION) += suspend.o swsusp_asm64.o diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index 751318765e2e..6e6a72e66d60 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -45,7 +45,8 @@ int main(void) DEFINE(__PT_PSW, offsetof(struct pt_regs, psw)); DEFINE(__PT_GPRS, offsetof(struct pt_regs, gprs)); DEFINE(__PT_ORIG_GPR2, offsetof(struct pt_regs, orig_gpr2)); - DEFINE(__PT_SVC_CODE, offsetof(struct pt_regs, svc_code)); + DEFINE(__PT_INT_CODE, offsetof(struct pt_regs, int_code)); + DEFINE(__PT_INT_PARM_LONG, offsetof(struct pt_regs, int_parm_long)); DEFINE(__PT_SIZE, sizeof(struct pt_regs)); BLANK(); DEFINE(__SF_BACKCHAIN, offsetof(struct stack_frame, back_chain)); @@ -108,7 +109,9 @@ int main(void) DEFINE(__LC_PGM_NEW_PSW, offsetof(struct _lowcore, program_new_psw)); DEFINE(__LC_MCK_NEW_PSW, offsetof(struct _lowcore, mcck_new_psw)); DEFINE(__LC_IO_NEW_PSW, offsetof(struct _lowcore, io_new_psw)); - DEFINE(__LC_SAVE_AREA, offsetof(struct _lowcore, save_area)); + DEFINE(__LC_SAVE_AREA_SYNC, offsetof(struct _lowcore, save_area_sync)); + DEFINE(__LC_SAVE_AREA_ASYNC, offsetof(struct _lowcore, save_area_async)); + DEFINE(__LC_SAVE_AREA_RESTART, offsetof(struct _lowcore, save_area_restart)); DEFINE(__LC_RETURN_PSW, offsetof(struct _lowcore, return_psw)); DEFINE(__LC_RETURN_MCCK_PSW, offsetof(struct _lowcore, return_mcck_psw)); DEFINE(__LC_SYNC_ENTER_TIMER, offsetof(struct _lowcore, sync_enter_timer)); @@ -150,7 +153,6 @@ int main(void) DEFINE(__LC_LAST_BREAK, offsetof(struct _lowcore, breaking_event_addr)); DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data)); DEFINE(__LC_GMAP, offsetof(struct _lowcore, gmap)); - DEFINE(__LC_CMF_HPP, offsetof(struct _lowcore, cmf_hpp)); DEFINE(__GMAP_ASCE, offsetof(struct gmap, asce)); #endif /* CONFIG_32BIT */ return 0; diff --git a/arch/s390/kernel/base.S b/arch/s390/kernel/base.S index f8828d38fa6e..3aa4d00aaf50 100644 --- a/arch/s390/kernel/base.S +++ b/arch/s390/kernel/base.S @@ -33,7 +33,7 @@ s390_base_mcck_handler_fn: .previous ENTRY(s390_base_ext_handler) - stmg %r0,%r15,__LC_SAVE_AREA + stmg %r0,%r15,__LC_SAVE_AREA_ASYNC basr %r13,0 0: aghi %r15,-STACK_FRAME_OVERHEAD larl %r1,s390_base_ext_handler_fn @@ -41,7 +41,7 @@ ENTRY(s390_base_ext_handler) ltgr %r1,%r1 jz 1f basr %r14,%r1 -1: lmg %r0,%r15,__LC_SAVE_AREA +1: lmg %r0,%r15,__LC_SAVE_AREA_ASYNC ni __LC_EXT_OLD_PSW+1,0xfd # clear wait state bit lpswe __LC_EXT_OLD_PSW @@ -53,7 +53,7 @@ s390_base_ext_handler_fn: .previous ENTRY(s390_base_pgm_handler) - stmg %r0,%r15,__LC_SAVE_AREA + stmg %r0,%r15,__LC_SAVE_AREA_SYNC basr %r13,0 0: aghi %r15,-STACK_FRAME_OVERHEAD larl %r1,s390_base_pgm_handler_fn @@ -61,7 +61,7 @@ ENTRY(s390_base_pgm_handler) ltgr %r1,%r1 jz 1f basr %r14,%r1 - lmg %r0,%r15,__LC_SAVE_AREA + lmg %r0,%r15,__LC_SAVE_AREA_SYNC lpswe __LC_PGM_OLD_PSW 1: lpswe disabled_wait_psw-0b(%r13) @@ -142,7 +142,7 @@ s390_base_mcck_handler_fn: .previous ENTRY(s390_base_ext_handler) - stm %r0,%r15,__LC_SAVE_AREA + stm %r0,%r15,__LC_SAVE_AREA_ASYNC basr %r13,0 0: ahi %r15,-STACK_FRAME_OVERHEAD l %r1,2f-0b(%r13) @@ -150,7 +150,7 @@ ENTRY(s390_base_ext_handler) ltr %r1,%r1 jz 1f basr %r14,%r1 -1: lm %r0,%r15,__LC_SAVE_AREA +1: lm %r0,%r15,__LC_SAVE_AREA_ASYNC ni __LC_EXT_OLD_PSW+1,0xfd # clear wait state bit lpsw __LC_EXT_OLD_PSW @@ -164,7 +164,7 @@ s390_base_ext_handler_fn: .previous ENTRY(s390_base_pgm_handler) - stm %r0,%r15,__LC_SAVE_AREA + stm %r0,%r15,__LC_SAVE_AREA_SYNC basr %r13,0 0: ahi %r15,-STACK_FRAME_OVERHEAD l %r1,2f-0b(%r13) @@ -172,7 +172,7 @@ ENTRY(s390_base_pgm_handler) ltr %r1,%r1 jz 1f basr %r14,%r1 - lm %r0,%r15,__LC_SAVE_AREA + lm %r0,%r15,__LC_SAVE_AREA_SYNC lpsw __LC_PGM_OLD_PSW 1: lpsw disabled_wait_psw-0b(%r13) diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index 84a982898448..ab64bdbab2ae 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -278,9 +278,6 @@ asmlinkage long sys32_ipc(u32 call, int first, int second, int third, u32 ptr) { if (call >> 16) /* hack for backward compatibility */ return -EINVAL; - - call &= 0xffff; - switch (call) { case SEMTIMEDOP: return compat_sys_semtimedop(first, compat_ptr(ptr), diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c index 4f68c81d3ffa..6fe78c2f95d9 100644 --- a/arch/s390/kernel/compat_signal.c +++ b/arch/s390/kernel/compat_signal.c @@ -501,8 +501,12 @@ static int setup_frame32(int sig, struct k_sigaction *ka, /* We forgot to include these in the sigcontext. To avoid breaking binary compatibility, they are passed as args. */ - regs->gprs[4] = current->thread.trap_no; - regs->gprs[5] = current->thread.prot_addr; + if (sig == SIGSEGV || sig == SIGBUS || sig == SIGILL || + sig == SIGTRAP || sig == SIGFPE) { + /* set extra registers only for synchronous signals */ + regs->gprs[4] = regs->int_code & 127; + regs->gprs[5] = regs->int_parm_long; + } /* Place signal number on stack to allow backtrace from handler. */ if (__put_user(regs->gprs[2], (int __force __user *) &frame->signo)) @@ -544,9 +548,9 @@ static int setup_rt_frame32(int sig, struct k_sigaction *ka, siginfo_t *info, /* Set up to return from userspace. If provided, use a stub already in userspace. */ if (ka->sa.sa_flags & SA_RESTORER) { - regs->gprs[14] = (__u64) ka->sa.sa_restorer; + regs->gprs[14] = (__u64) ka->sa.sa_restorer | PSW32_ADDR_AMODE; } else { - regs->gprs[14] = (__u64) frame->retcode; + regs->gprs[14] = (__u64) frame->retcode | PSW32_ADDR_AMODE; err |= __put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn, (u16 __force __user *)(frame->retcode)); } diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index 5ad6bc078bfd..6848828b962e 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -74,7 +74,7 @@ static ssize_t debug_input(struct file *file, const char __user *user_buf, static int debug_open(struct inode *inode, struct file *file); static int debug_close(struct inode *inode, struct file *file); static debug_info_t *debug_info_create(const char *name, int pages_per_area, - int nr_areas, int buf_size, mode_t mode); + int nr_areas, int buf_size, umode_t mode); static void debug_info_get(debug_info_t *); static void debug_info_put(debug_info_t *); static int debug_prolog_level_fn(debug_info_t * id, @@ -330,7 +330,7 @@ debug_info_free(debug_info_t* db_info){ static debug_info_t* debug_info_create(const char *name, int pages_per_area, int nr_areas, - int buf_size, mode_t mode) + int buf_size, umode_t mode) { debug_info_t* rc; @@ -688,7 +688,7 @@ debug_close(struct inode *inode, struct file *file) */ debug_info_t *debug_register_mode(const char *name, int pages_per_area, - int nr_areas, int buf_size, mode_t mode, + int nr_areas, int buf_size, umode_t mode, uid_t uid, gid_t gid) { debug_info_t *rc = NULL; @@ -1090,7 +1090,7 @@ debug_register_view(debug_info_t * id, struct debug_view *view) int rc = 0; int i; unsigned long flags; - mode_t mode; + umode_t mode; struct dentry *pde; if (!id) diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index 45df6d456aa1..e2f847599c8e 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -1578,10 +1578,15 @@ void show_code(struct pt_regs *regs) ptr += sprintf(ptr, "%s Code:", mode); hops = 0; while (start < end && hops < 8) { - *ptr++ = (start == 32) ? '>' : ' '; + opsize = insn_length(code[start]); + if (start + opsize == 32) + *ptr++ = '#'; + else if (start == 32) + *ptr++ = '>'; + else + *ptr++ = ' '; addr = regs->psw.addr + start - 32; ptr += sprintf(ptr, ONELONG, addr); - opsize = insn_length(code[start]); if (start + opsize >= end) break; for (i = 0; i < opsize; i++) diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index c9ffe0025197..52098d6dfaa7 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -434,18 +434,22 @@ static void __init append_to_cmdline(size_t (*ipl_data)(char *, size_t)) } } -static void __init setup_boot_command_line(void) +static inline int has_ebcdic_char(const char *str) { int i; - /* convert arch command line to ascii */ - for (i = 0; i < ARCH_COMMAND_LINE_SIZE; i++) - if (COMMAND_LINE[i] & 0x80) - break; - if (i < ARCH_COMMAND_LINE_SIZE) - EBCASC(COMMAND_LINE, ARCH_COMMAND_LINE_SIZE); - COMMAND_LINE[ARCH_COMMAND_LINE_SIZE-1] = 0; + for (i = 0; str[i]; i++) + if (str[i] & 0x80) + return 1; + return 0; +} +static void __init setup_boot_command_line(void) +{ + COMMAND_LINE[ARCH_COMMAND_LINE_SIZE - 1] = 0; + /* convert arch command line to ascii if necessary */ + if (has_ebcdic_char(COMMAND_LINE)) + EBCASC(COMMAND_LINE, ARCH_COMMAND_LINE_SIZE); /* copy arch command line */ strlcpy(boot_command_line, strstrip(COMMAND_LINE), ARCH_COMMAND_LINE_SIZE); diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index b13157057e02..3705700ed374 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -19,32 +19,22 @@ #include <asm/unistd.h> #include <asm/page.h> -/* - * Stack layout for the system_call stack entry. - * The first few entries are identical to the user_regs_struct. - */ -SP_PTREGS = STACK_FRAME_OVERHEAD -SP_ARGS = STACK_FRAME_OVERHEAD + __PT_ARGS -SP_PSW = STACK_FRAME_OVERHEAD + __PT_PSW -SP_R0 = STACK_FRAME_OVERHEAD + __PT_GPRS -SP_R1 = STACK_FRAME_OVERHEAD + __PT_GPRS + 4 -SP_R2 = STACK_FRAME_OVERHEAD + __PT_GPRS + 8 -SP_R3 = STACK_FRAME_OVERHEAD + __PT_GPRS + 12 -SP_R4 = STACK_FRAME_OVERHEAD + __PT_GPRS + 16 -SP_R5 = STACK_FRAME_OVERHEAD + __PT_GPRS + 20 -SP_R6 = STACK_FRAME_OVERHEAD + __PT_GPRS + 24 -SP_R7 = STACK_FRAME_OVERHEAD + __PT_GPRS + 28 -SP_R8 = STACK_FRAME_OVERHEAD + __PT_GPRS + 32 -SP_R9 = STACK_FRAME_OVERHEAD + __PT_GPRS + 36 -SP_R10 = STACK_FRAME_OVERHEAD + __PT_GPRS + 40 -SP_R11 = STACK_FRAME_OVERHEAD + __PT_GPRS + 44 -SP_R12 = STACK_FRAME_OVERHEAD + __PT_GPRS + 48 -SP_R13 = STACK_FRAME_OVERHEAD + __PT_GPRS + 52 -SP_R14 = STACK_FRAME_OVERHEAD + __PT_GPRS + 56 -SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 60 -SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2 -SP_SVC_CODE = STACK_FRAME_OVERHEAD + __PT_SVC_CODE -SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE +__PT_R0 = __PT_GPRS +__PT_R1 = __PT_GPRS + 4 +__PT_R2 = __PT_GPRS + 8 +__PT_R3 = __PT_GPRS + 12 +__PT_R4 = __PT_GPRS + 16 +__PT_R5 = __PT_GPRS + 20 +__PT_R6 = __PT_GPRS + 24 +__PT_R7 = __PT_GPRS + 28 +__PT_R8 = __PT_GPRS + 32 +__PT_R9 = __PT_GPRS + 36 +__PT_R10 = __PT_GPRS + 40 +__PT_R11 = __PT_GPRS + 44 +__PT_R12 = __PT_GPRS + 48 +__PT_R13 = __PT_GPRS + 524 +__PT_R14 = __PT_GPRS + 56 +__PT_R15 = __PT_GPRS + 60 _TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \ _TIF_MCCK_PENDING | _TIF_PER_TRAP ) @@ -58,133 +48,91 @@ STACK_SIZE = 1 << STACK_SHIFT #define BASED(name) name-system_call(%r13) -#ifdef CONFIG_TRACE_IRQFLAGS .macro TRACE_IRQS_ON +#ifdef CONFIG_TRACE_IRQFLAGS basr %r2,%r0 - l %r1,BASED(.Ltrace_irq_on_caller) - basr %r14,%r1 + l %r1,BASED(.Lhardirqs_on) + basr %r14,%r1 # call trace_hardirqs_on_caller +#endif .endm .macro TRACE_IRQS_OFF +#ifdef CONFIG_TRACE_IRQFLAGS basr %r2,%r0 - l %r1,BASED(.Ltrace_irq_off_caller) - basr %r14,%r1 - .endm -#else -#define TRACE_IRQS_ON -#define TRACE_IRQS_OFF + l %r1,BASED(.Lhardirqs_off) + basr %r14,%r1 # call trace_hardirqs_off_caller #endif + .endm -#ifdef CONFIG_LOCKDEP .macro LOCKDEP_SYS_EXIT - tm SP_PSW+1(%r15),0x01 # returning to user ? - jz 0f +#ifdef CONFIG_LOCKDEP + tm __PT_PSW+1(%r11),0x01 # returning to user ? + jz .+10 l %r1,BASED(.Llockdep_sys_exit) - basr %r14,%r1 -0: - .endm -#else -#define LOCKDEP_SYS_EXIT + basr %r14,%r1 # call lockdep_sys_exit #endif - -/* - * Register usage in interrupt handlers: - * R9 - pointer to current task structure - * R13 - pointer to literal pool - * R14 - return register for function calls - * R15 - kernel stack pointer - */ - - .macro UPDATE_VTIME lc_from,lc_to,lc_sum - lm %r10,%r11,\lc_from - sl %r10,\lc_to - sl %r11,\lc_to+4 - bc 3,BASED(0f) - sl %r10,BASED(.Lc_1) -0: al %r10,\lc_sum - al %r11,\lc_sum+4 - bc 12,BASED(1f) - al %r10,BASED(.Lc_1) -1: stm %r10,%r11,\lc_sum - .endm - - .macro SAVE_ALL_SVC psworg,savearea - stm %r12,%r15,\savearea - l %r13,__LC_SVC_NEW_PSW+4 # load &system_call to %r13 - l %r15,__LC_KERNEL_STACK # problem state -> load ksp - s %r15,BASED(.Lc_spsize) # make room for registers & psw - .endm - - .macro SAVE_ALL_BASE savearea - stm %r12,%r15,\savearea - l %r13,__LC_SVC_NEW_PSW+4 # load &system_call to %r13 .endm - .macro SAVE_ALL_PGM psworg,savearea - tm \psworg+1,0x01 # test problem state bit + .macro CHECK_STACK stacksize,savearea #ifdef CONFIG_CHECK_STACK - bnz BASED(1f) - tml %r15,STACK_SIZE - CONFIG_STACK_GUARD - bnz BASED(2f) - la %r12,\psworg - b BASED(stack_overflow) -#else - bz BASED(2f) + tml %r15,\stacksize - CONFIG_STACK_GUARD + la %r14,\savearea + jz stack_overflow #endif -1: l %r15,__LC_KERNEL_STACK # problem state -> load ksp -2: s %r15,BASED(.Lc_spsize) # make room for registers & psw .endm - .macro SAVE_ALL_ASYNC psworg,savearea - stm %r12,%r15,\savearea - l %r13,__LC_SVC_NEW_PSW+4 # load &system_call to %r13 - la %r12,\psworg - tm \psworg+1,0x01 # test problem state bit - bnz BASED(1f) # from user -> load async stack - clc \psworg+4(4),BASED(.Lcritical_end) - bhe BASED(0f) - clc \psworg+4(4),BASED(.Lcritical_start) - bl BASED(0f) - l %r14,BASED(.Lcleanup_critical) - basr %r14,%r14 - tm 1(%r12),0x01 # retest problem state after cleanup - bnz BASED(1f) -0: l %r14,__LC_ASYNC_STACK # are we already on the async stack ? + .macro SWITCH_ASYNC savearea,stack,shift + tmh %r8,0x0001 # interrupting from user ? + jnz 1f + lr %r14,%r9 + sl %r14,BASED(.Lcritical_start) + cl %r14,BASED(.Lcritical_length) + jhe 0f + la %r11,\savearea # inside critical section, do cleanup + bras %r14,cleanup_critical + tmh %r8,0x0001 # retest problem state after cleanup + jnz 1f +0: l %r14,\stack # are we already on the target stack? slr %r14,%r15 - sra %r14,STACK_SHIFT -#ifdef CONFIG_CHECK_STACK - bnz BASED(1f) - tml %r15,STACK_SIZE - CONFIG_STACK_GUARD - bnz BASED(2f) - b BASED(stack_overflow) -#else - bz BASED(2f) -#endif -1: l %r15,__LC_ASYNC_STACK -2: s %r15,BASED(.Lc_spsize) # make room for registers & psw + sra %r14,\shift + jnz 1f + CHECK_STACK 1<<\shift,\savearea + j 2f +1: l %r15,\stack # load target stack +2: ahi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE) + la %r11,STACK_FRAME_OVERHEAD(%r15) .endm - .macro CREATE_STACK_FRAME savearea - xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) - st %r2,SP_ORIG_R2(%r15) # store original content of gpr 2 - mvc SP_R12(16,%r15),\savearea # move %r12-%r15 to stack - stm %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack + .macro ADD64 high,low,timer + al \high,\timer + al \low,\timer+4 + brc 12,.+8 + ahi \high,1 .endm - .macro RESTORE_ALL psworg,sync - mvc \psworg(8),SP_PSW(%r15) # move user PSW to lowcore - .if !\sync - ni \psworg+1,0xfd # clear wait state bit - .endif - lm %r0,%r15,SP_R0(%r15) # load gprs 0-15 of user - stpt __LC_EXIT_TIMER - lpsw \psworg # back to caller + .macro SUB64 high,low,timer + sl \high,\timer + sl \low,\timer+4 + brc 3,.+8 + ahi \high,-1 + .endm + + .macro UPDATE_VTIME high,low,enter_timer + lm \high,\low,__LC_EXIT_TIMER + SUB64 \high,\low,\enter_timer + ADD64 \high,\low,__LC_USER_TIMER + stm \high,\low,__LC_USER_TIMER + lm \high,\low,__LC_LAST_UPDATE_TIMER + SUB64 \high,\low,__LC_EXIT_TIMER + ADD64 \high,\low,__LC_SYSTEM_TIMER + stm \high,\low,__LC_SYSTEM_TIMER + mvc __LC_LAST_UPDATE_TIMER(8),\enter_timer .endm .macro REENABLE_IRQS - mvc __SF_EMPTY(1,%r15),SP_PSW(%r15) - ni __SF_EMPTY(%r15),0xbf - ssm __SF_EMPTY(%r15) + st %r8,__LC_RETURN_PSW + ni __LC_RETURN_PSW,0xbf + ssm __LC_RETURN_PSW .endm .section .kprobes.text, "ax" @@ -197,14 +145,13 @@ STACK_SIZE = 1 << STACK_SHIFT * gpr2 = prev */ ENTRY(__switch_to) - basr %r1,0 -0: l %r4,__THREAD_info(%r2) # get thread_info of prev + l %r4,__THREAD_info(%r2) # get thread_info of prev l %r5,__THREAD_info(%r3) # get thread_info of next tm __TI_flags+3(%r4),_TIF_MCCK_PENDING # machine check pending? - bz 1f-0b(%r1) + jz 0f ni __TI_flags+3(%r4),255-_TIF_MCCK_PENDING # clear flag in prev oi __TI_flags+3(%r5),_TIF_MCCK_PENDING # set it in next -1: stm %r6,%r15,__SF_GPRS(%r15) # store gprs of prev task +0: stm %r6,%r15,__SF_GPRS(%r15) # store gprs of prev task st %r15,__THREAD_ksp(%r2) # store kernel stack of prev l %r15,__THREAD_ksp(%r3) # load kernel stack of next lctl %c4,%c4,__TASK_pid(%r3) # load pid to control reg. 4 @@ -224,48 +171,55 @@ __critical_start: ENTRY(system_call) stpt __LC_SYNC_ENTER_TIMER -sysc_saveall: - SAVE_ALL_SVC __LC_SVC_OLD_PSW,__LC_SAVE_AREA - CREATE_STACK_FRAME __LC_SAVE_AREA - l %r12,__LC_THREAD_INFO # load pointer to thread_info struct - mvc SP_PSW(8,%r15),__LC_SVC_OLD_PSW - mvc SP_SVC_CODE(4,%r15),__LC_SVC_ILC - oi __TI_flags+3(%r12),_TIF_SYSCALL +sysc_stm: + stm %r8,%r15,__LC_SAVE_AREA_SYNC + l %r12,__LC_THREAD_INFO + l %r13,__LC_SVC_NEW_PSW+4 +sysc_per: + l %r15,__LC_KERNEL_STACK + ahi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE) + la %r11,STACK_FRAME_OVERHEAD(%r15) # pointer to pt_regs sysc_vtime: - UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER -sysc_stime: - UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER -sysc_update: - mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER + UPDATE_VTIME %r8,%r9,__LC_SYNC_ENTER_TIMER + stm %r0,%r7,__PT_R0(%r11) + mvc __PT_R8(32,%r11),__LC_SAVE_AREA_SYNC + mvc __PT_PSW(8,%r11),__LC_SVC_OLD_PSW + mvc __PT_INT_CODE(4,%r11),__LC_SVC_ILC sysc_do_svc: - xr %r7,%r7 - icm %r7,3,SP_SVC_CODE+2(%r15)# load svc number and test for svc 0 - bnz BASED(sysc_nr_ok) # svc number > 0 + oi __TI_flags+3(%r12),_TIF_SYSCALL + lh %r8,__PT_INT_CODE+2(%r11) + sla %r8,2 # shift and test for svc0 + jnz sysc_nr_ok # svc 0: system call number in %r1 cl %r1,BASED(.Lnr_syscalls) - bnl BASED(sysc_nr_ok) - sth %r1,SP_SVC_CODE+2(%r15) - lr %r7,%r1 # copy svc number to %r7 + jnl sysc_nr_ok + sth %r1,__PT_INT_CODE+2(%r11) + lr %r8,%r1 + sla %r8,2 sysc_nr_ok: - sll %r7,2 # svc number *4 - l %r10,BASED(.Lsysc_table) + l %r10,BASED(.Lsys_call_table) # 31 bit system call table + xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) + st %r2,__PT_ORIG_GPR2(%r11) + st %r7,STACK_FRAME_OVERHEAD(%r15) + l %r9,0(%r8,%r10) # get system call addr. tm __TI_flags+2(%r12),_TIF_TRACE >> 8 - mvc SP_ARGS(4,%r15),SP_R7(%r15) - l %r8,0(%r7,%r10) # get system call addr. - bnz BASED(sysc_tracesys) - basr %r14,%r8 # call sys_xxxx - st %r2,SP_R2(%r15) # store return value (change R2 on stack) + jnz sysc_tracesys + basr %r14,%r9 # call sys_xxxx + st %r2,__PT_R2(%r11) # store return value sysc_return: LOCKDEP_SYS_EXIT sysc_tif: - tm SP_PSW+1(%r15),0x01 # returning to user ? - bno BASED(sysc_restore) + tm __PT_PSW+1(%r11),0x01 # returning to user ? + jno sysc_restore tm __TI_flags+3(%r12),_TIF_WORK_SVC - bnz BASED(sysc_work) # there is work to do (signals etc.) + jnz sysc_work # check for work ni __TI_flags+3(%r12),255-_TIF_SYSCALL sysc_restore: - RESTORE_ALL __LC_RETURN_PSW,1 + mvc __LC_RETURN_PSW(8),__PT_PSW(%r11) + stpt __LC_EXIT_TIMER + lm %r0,%r15,__PT_R0(%r11) + lpsw __LC_RETURN_PSW sysc_done: # @@ -273,16 +227,16 @@ sysc_done: # sysc_work: tm __TI_flags+3(%r12),_TIF_MCCK_PENDING - bo BASED(sysc_mcck_pending) + jo sysc_mcck_pending tm __TI_flags+3(%r12),_TIF_NEED_RESCHED - bo BASED(sysc_reschedule) + jo sysc_reschedule tm __TI_flags+3(%r12),_TIF_SIGPENDING - bo BASED(sysc_sigpending) + jo sysc_sigpending tm __TI_flags+3(%r12),_TIF_NOTIFY_RESUME - bo BASED(sysc_notify_resume) + jo sysc_notify_resume tm __TI_flags+3(%r12),_TIF_PER_TRAP - bo BASED(sysc_singlestep) - b BASED(sysc_return) # beware of critical section cleanup + jo sysc_singlestep + j sysc_return # beware of critical section cleanup # # _TIF_NEED_RESCHED is set, call schedule @@ -290,13 +244,13 @@ sysc_work: sysc_reschedule: l %r1,BASED(.Lschedule) la %r14,BASED(sysc_return) - br %r1 # call scheduler + br %r1 # call schedule # # _TIF_MCCK_PENDING is set, call handler # sysc_mcck_pending: - l %r1,BASED(.Ls390_handle_mcck) + l %r1,BASED(.Lhandle_mcck) la %r14,BASED(sysc_return) br %r1 # TIF bit will be cleared by handler @@ -305,23 +259,24 @@ sysc_mcck_pending: # sysc_sigpending: ni __TI_flags+3(%r12),255-_TIF_PER_TRAP # clear TIF_PER_TRAP - la %r2,SP_PTREGS(%r15) # load pt_regs + lr %r2,%r11 # pass pointer to pt_regs l %r1,BASED(.Ldo_signal) basr %r14,%r1 # call do_signal tm __TI_flags+3(%r12),_TIF_SYSCALL - bno BASED(sysc_return) - lm %r2,%r6,SP_R2(%r15) # load svc arguments - xr %r7,%r7 # svc 0 returns -ENOSYS - clc SP_SVC_CODE+2(2,%r15),BASED(.Lnr_syscalls+2) - bnl BASED(sysc_nr_ok) # invalid svc number -> do svc 0 - icm %r7,3,SP_SVC_CODE+2(%r15)# load new svc number - b BASED(sysc_nr_ok) # restart svc + jno sysc_return + lm %r2,%r7,__PT_R2(%r11) # load svc arguments + xr %r8,%r8 # svc 0 returns -ENOSYS + clc __PT_INT_CODE+2(2,%r11),BASED(.Lnr_syscalls+2) + jnl sysc_nr_ok # invalid svc number -> do svc 0 + lh %r8,__PT_INT_CODE+2(%r11) # load new svc number + sla %r8,2 + j sysc_nr_ok # restart svc # # _TIF_NOTIFY_RESUME is set, call do_notify_resume # sysc_notify_resume: - la %r2,SP_PTREGS(%r15) # load pt_regs + lr %r2,%r11 # pass pointer to pt_regs l %r1,BASED(.Ldo_notify_resume) la %r14,BASED(sysc_return) br %r1 # call do_notify_resume @@ -331,56 +286,57 @@ sysc_notify_resume: # sysc_singlestep: ni __TI_flags+3(%r12),255-(_TIF_SYSCALL | _TIF_PER_TRAP) - la %r2,SP_PTREGS(%r15) # address of register-save area - l %r1,BASED(.Lhandle_per) # load adr. of per handler - la %r14,BASED(sysc_return) # load adr. of system return - br %r1 # branch to do_per_trap + lr %r2,%r11 # pass pointer to pt_regs + l %r1,BASED(.Ldo_per_trap) + la %r14,BASED(sysc_return) + br %r1 # call do_per_trap # # call tracehook_report_syscall_entry/tracehook_report_syscall_exit before # and after the system call # sysc_tracesys: - l %r1,BASED(.Ltrace_entry) - la %r2,SP_PTREGS(%r15) # load pt_regs + l %r1,BASED(.Ltrace_enter) + lr %r2,%r11 # pass pointer to pt_regs la %r3,0 xr %r0,%r0 - icm %r0,3,SP_SVC_CODE(%r15) - st %r0,SP_R2(%r15) - basr %r14,%r1 + icm %r0,3,__PT_INT_CODE+2(%r11) + st %r0,__PT_R2(%r11) + basr %r14,%r1 # call do_syscall_trace_enter cl %r2,BASED(.Lnr_syscalls) - bnl BASED(sysc_tracenogo) - lr %r7,%r2 - sll %r7,2 # svc number *4 - l %r8,0(%r7,%r10) + jnl sysc_tracenogo + lr %r8,%r2 + sll %r8,2 + l %r9,0(%r8,%r10) sysc_tracego: - lm %r3,%r6,SP_R3(%r15) - mvc SP_ARGS(4,%r15),SP_R7(%r15) - l %r2,SP_ORIG_R2(%r15) - basr %r14,%r8 # call sys_xxx - st %r2,SP_R2(%r15) # store return value + lm %r3,%r7,__PT_R3(%r11) + st %r7,STACK_FRAME_OVERHEAD(%r15) + l %r2,__PT_ORIG_GPR2(%r11) + basr %r14,%r9 # call sys_xxx + st %r2,__PT_R2(%r11) # store return value sysc_tracenogo: tm __TI_flags+2(%r12),_TIF_TRACE >> 8 - bz BASED(sysc_return) + jz sysc_return l %r1,BASED(.Ltrace_exit) - la %r2,SP_PTREGS(%r15) # load pt_regs + lr %r2,%r11 # pass pointer to pt_regs la %r14,BASED(sysc_return) - br %r1 + br %r1 # call do_syscall_trace_exit # # a new process exits the kernel with ret_from_fork # ENTRY(ret_from_fork) + la %r11,STACK_FRAME_OVERHEAD(%r15) + l %r12,__LC_THREAD_INFO l %r13,__LC_SVC_NEW_PSW+4 - l %r12,__LC_THREAD_INFO # load pointer to thread_info struct - tm SP_PSW+1(%r15),0x01 # forking a kernel thread ? - bo BASED(0f) - st %r15,SP_R15(%r15) # store stack pointer for new kthread -0: l %r1,BASED(.Lschedtail) - basr %r14,%r1 + tm __PT_PSW+1(%r11),0x01 # forking a kernel thread ? + jo 0f + st %r15,__PT_R15(%r11) # store stack pointer for new kthread +0: l %r1,BASED(.Lschedule_tail) + basr %r14,%r1 # call schedule_tail TRACE_IRQS_ON - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - b BASED(sysc_tracenogo) + ssm __LC_SVC_NEW_PSW # reenable interrupts + j sysc_tracenogo # # kernel_execve function needs to deal with pt_regs that is not @@ -390,153 +346,98 @@ ENTRY(kernel_execve) stm %r12,%r15,48(%r15) lr %r14,%r15 l %r13,__LC_SVC_NEW_PSW+4 - s %r15,BASED(.Lc_spsize) + ahi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE) st %r14,__SF_BACKCHAIN(%r15) - la %r12,SP_PTREGS(%r15) + la %r12,STACK_FRAME_OVERHEAD(%r15) xc 0(__PT_SIZE,%r12),0(%r12) l %r1,BASED(.Ldo_execve) lr %r5,%r12 - basr %r14,%r1 + basr %r14,%r1 # call do_execve ltr %r2,%r2 - be BASED(0f) - a %r15,BASED(.Lc_spsize) + je 0f + ahi %r15,(STACK_FRAME_OVERHEAD + __PT_SIZE) lm %r12,%r15,48(%r15) br %r14 # execve succeeded. -0: stnsm __SF_EMPTY(%r15),0xfc # disable interrupts +0: ssm __LC_PGM_NEW_PSW # disable I/O and ext. interrupts l %r15,__LC_KERNEL_STACK # load ksp - s %r15,BASED(.Lc_spsize) # make room for registers & psw - mvc SP_PTREGS(__PT_SIZE,%r15),0(%r12) # copy pt_regs + ahi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE) + la %r11,STACK_FRAME_OVERHEAD(%r15) + mvc 0(__PT_SIZE,%r11),0(%r12) # copy pt_regs l %r12,__LC_THREAD_INFO xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts + ssm __LC_SVC_NEW_PSW # reenable interrupts l %r1,BASED(.Lexecve_tail) - basr %r14,%r1 - b BASED(sysc_return) + basr %r14,%r1 # call execve_tail + j sysc_return /* * Program check handler routine */ ENTRY(pgm_check_handler) -/* - * First we need to check for a special case: - * Single stepping an instruction that disables the PER event mask will - * cause a PER event AFTER the mask has been set. Example: SVC or LPSW. - * For a single stepped SVC the program check handler gets control after - * the SVC new PSW has been loaded. But we want to execute the SVC first and - * then handle the PER event. Therefore we update the SVC old PSW to point - * to the pgm_check_handler and branch to the SVC handler after we checked - * if we have to load the kernel stack register. - * For every other possible cause for PER event without the PER mask set - * we just ignore the PER event (FIXME: is there anything we have to do - * for LPSW?). - */ stpt __LC_SYNC_ENTER_TIMER - SAVE_ALL_BASE __LC_SAVE_AREA - tm __LC_PGM_INT_CODE+1,0x80 # check whether we got a per exception - bnz BASED(pgm_per) # got per exception -> special case - SAVE_ALL_PGM __LC_PGM_OLD_PSW,__LC_SAVE_AREA - CREATE_STACK_FRAME __LC_SAVE_AREA - mvc SP_PSW(8,%r15),__LC_PGM_OLD_PSW - l %r12,__LC_THREAD_INFO # load pointer to thread_info struct - tm SP_PSW+1(%r15),0x01 # interrupting from user ? - bz BASED(pgm_no_vtime) - UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER - UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER - mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER -pgm_no_vtime: - l %r3,__LC_PGM_ILC # load program interruption code - l %r4,__LC_TRANS_EXC_CODE - REENABLE_IRQS - la %r8,0x7f - nr %r8,%r3 - sll %r8,2 - l %r1,BASED(.Ljump_table) - l %r1,0(%r8,%r1) # load address of handler routine - la %r2,SP_PTREGS(%r15) # address of register-save area - basr %r14,%r1 # branch to interrupt-handler -pgm_exit: - b BASED(sysc_return) - -# -# handle per exception -# -pgm_per: - tm __LC_PGM_OLD_PSW,0x40 # test if per event recording is on - bnz BASED(pgm_per_std) # ok, normal per event from user space -# ok its one of the special cases, now we need to find out which one - clc __LC_PGM_OLD_PSW(8),__LC_SVC_NEW_PSW - be BASED(pgm_svcper) -# no interesting special case, ignore PER event - lm %r12,%r15,__LC_SAVE_AREA - lpsw 0x28 - -# -# Normal per exception -# -pgm_per_std: - SAVE_ALL_PGM __LC_PGM_OLD_PSW,__LC_SAVE_AREA - CREATE_STACK_FRAME __LC_SAVE_AREA - mvc SP_PSW(8,%r15),__LC_PGM_OLD_PSW - l %r12,__LC_THREAD_INFO # load pointer to thread_info struct - tm SP_PSW+1(%r15),0x01 # interrupting from user ? - bz BASED(pgm_no_vtime2) - UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER - UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER - mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER -pgm_no_vtime2: + stm %r8,%r15,__LC_SAVE_AREA_SYNC + l %r12,__LC_THREAD_INFO + l %r13,__LC_SVC_NEW_PSW+4 + lm %r8,%r9,__LC_PGM_OLD_PSW + tmh %r8,0x0001 # test problem state bit + jnz 1f # -> fault in user space + tmh %r8,0x4000 # PER bit set in old PSW ? + jnz 0f # -> enabled, can't be a double fault + tm __LC_PGM_ILC+3,0x80 # check for per exception + jnz pgm_svcper # -> single stepped svc +0: CHECK_STACK STACK_SIZE,__LC_SAVE_AREA_SYNC + j 2f +1: UPDATE_VTIME %r14,%r15,__LC_SYNC_ENTER_TIMER + l %r15,__LC_KERNEL_STACK +2: ahi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE) + la %r11,STACK_FRAME_OVERHEAD(%r15) + stm %r0,%r7,__PT_R0(%r11) + mvc __PT_R8(32,%r11),__LC_SAVE_AREA_SYNC + stm %r8,%r9,__PT_PSW(%r11) + mvc __PT_INT_CODE(4,%r11),__LC_PGM_ILC + mvc __PT_INT_PARM_LONG(4,%r11),__LC_TRANS_EXC_CODE + tm __LC_PGM_ILC+3,0x80 # check for per exception + jz 0f l %r1,__TI_task(%r12) - tm SP_PSW+1(%r15),0x01 # kernel per event ? - bz BASED(kernel_per) - mvc __THREAD_per_cause(2,%r1),__LC_PER_CAUSE + tmh %r8,0x0001 # kernel per event ? + jz pgm_kprobe + oi __TI_flags+3(%r12),_TIF_PER_TRAP mvc __THREAD_per_address(4,%r1),__LC_PER_ADDRESS + mvc __THREAD_per_cause(2,%r1),__LC_PER_CAUSE mvc __THREAD_per_paid(1,%r1),__LC_PER_PAID - oi __TI_flags+3(%r12),_TIF_PER_TRAP # set TIF_PER_TRAP - l %r3,__LC_PGM_ILC # load program interruption code - l %r4,__LC_TRANS_EXC_CODE - REENABLE_IRQS - la %r8,0x7f - nr %r8,%r3 # clear per-event-bit and ilc - be BASED(pgm_exit2) # only per or per+check ? - sll %r8,2 +0: REENABLE_IRQS + xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) l %r1,BASED(.Ljump_table) - l %r1,0(%r8,%r1) # load address of handler routine - la %r2,SP_PTREGS(%r15) # address of register-save area + la %r10,0x7f + n %r10,__PT_INT_CODE(%r11) + je sysc_return + sll %r10,2 + l %r1,0(%r10,%r1) # load address of handler routine + lr %r2,%r11 # pass pointer to pt_regs basr %r14,%r1 # branch to interrupt-handler -pgm_exit2: - b BASED(sysc_return) + j sysc_return # -# it was a single stepped SVC that is causing all the trouble +# PER event in supervisor state, must be kprobes # -pgm_svcper: - SAVE_ALL_PGM __LC_SVC_OLD_PSW,__LC_SAVE_AREA - CREATE_STACK_FRAME __LC_SAVE_AREA - l %r12,__LC_THREAD_INFO # load pointer to thread_info struct - mvc SP_PSW(8,%r15),__LC_SVC_OLD_PSW - mvc SP_SVC_CODE(4,%r15),__LC_SVC_ILC - oi __TI_flags+3(%r12),(_TIF_SYSCALL | _TIF_PER_TRAP) - UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER - UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER - mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER - l %r8,__TI_task(%r12) - mvc __THREAD_per_cause(2,%r8),__LC_PER_CAUSE - mvc __THREAD_per_address(4,%r8),__LC_PER_ADDRESS - mvc __THREAD_per_paid(1,%r8),__LC_PER_PAID - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - lm %r2,%r6,SP_R2(%r15) # load svc arguments - b BASED(sysc_do_svc) +pgm_kprobe: + REENABLE_IRQS + xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) + l %r1,BASED(.Ldo_per_trap) + lr %r2,%r11 # pass pointer to pt_regs + basr %r14,%r1 # call do_per_trap + j sysc_return # -# per was called from kernel, must be kprobes +# single stepped system call # -kernel_per: - REENABLE_IRQS - la %r2,SP_PTREGS(%r15) # address of register-save area - l %r1,BASED(.Lhandle_per) # load adr. of per handler - basr %r14,%r1 # branch to do_single_step - b BASED(pgm_exit) +pgm_svcper: + oi __TI_flags+3(%r12),_TIF_PER_TRAP + mvc __LC_RETURN_PSW(4),__LC_SVC_NEW_PSW + mvc __LC_RETURN_PSW+4(4),BASED(.Lsysc_per) + lpsw __LC_RETURN_PSW # branch to sysc_per and enable irqs /* * IO interrupt handler routine @@ -545,28 +446,35 @@ kernel_per: ENTRY(io_int_handler) stck __LC_INT_CLOCK stpt __LC_ASYNC_ENTER_TIMER - SAVE_ALL_ASYNC __LC_IO_OLD_PSW,__LC_SAVE_AREA+16 - CREATE_STACK_FRAME __LC_SAVE_AREA+16 - mvc SP_PSW(8,%r15),0(%r12) # move user PSW to stack - l %r12,__LC_THREAD_INFO # load pointer to thread_info struct - tm SP_PSW+1(%r15),0x01 # interrupting from user ? - bz BASED(io_no_vtime) - UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER - UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER - mvc __LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER -io_no_vtime: + stm %r8,%r15,__LC_SAVE_AREA_ASYNC + l %r12,__LC_THREAD_INFO + l %r13,__LC_SVC_NEW_PSW+4 + lm %r8,%r9,__LC_IO_OLD_PSW + tmh %r8,0x0001 # interrupting from user ? + jz io_skip + UPDATE_VTIME %r14,%r15,__LC_ASYNC_ENTER_TIMER +io_skip: + SWITCH_ASYNC __LC_SAVE_AREA_ASYNC,__LC_ASYNC_STACK,STACK_SHIFT + stm %r0,%r7,__PT_R0(%r11) + mvc __PT_R8(32,%r11),__LC_SAVE_AREA_ASYNC + stm %r8,%r9,__PT_PSW(%r11) TRACE_IRQS_OFF - l %r1,BASED(.Ldo_IRQ) # load address of do_IRQ - la %r2,SP_PTREGS(%r15) # address of register-save area - basr %r14,%r1 # branch to standard irq handler + xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) + l %r1,BASED(.Ldo_IRQ) + lr %r2,%r11 # pass pointer to pt_regs + basr %r14,%r1 # call do_IRQ io_return: LOCKDEP_SYS_EXIT TRACE_IRQS_ON io_tif: tm __TI_flags+3(%r12),_TIF_WORK_INT - bnz BASED(io_work) # there is work to do (signals etc.) + jnz io_work # there is work to do (signals etc.) io_restore: - RESTORE_ALL __LC_RETURN_PSW,0 + mvc __LC_RETURN_PSW(8),__PT_PSW(%r11) + ni __LC_RETURN_PSW+1,0xfd # clean wait state bit + stpt __LC_EXIT_TIMER + lm %r0,%r15,__PT_R0(%r11) + lpsw __LC_RETURN_PSW io_done: # @@ -577,28 +485,29 @@ io_done: # Before any work can be done, a switch to the kernel stack is required. # io_work: - tm SP_PSW+1(%r15),0x01 # returning to user ? - bo BASED(io_work_user) # yes -> do resched & signal + tm __PT_PSW+1(%r11),0x01 # returning to user ? + jo io_work_user # yes -> do resched & signal #ifdef CONFIG_PREEMPT # check for preemptive scheduling icm %r0,15,__TI_precount(%r12) - bnz BASED(io_restore) # preemption disabled + jnz io_restore # preemption disabled tm __TI_flags+3(%r12),_TIF_NEED_RESCHED - bno BASED(io_restore) + jno io_restore # switch to kernel stack - l %r1,SP_R15(%r15) - s %r1,BASED(.Lc_spsize) - mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15) - xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain + l %r1,__PT_R15(%r11) + ahi %r1,-(STACK_FRAME_OVERHEAD + __PT_SIZE) + mvc STACK_FRAME_OVERHEAD(__PT_SIZE,%r1),0(%r11) + xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) + la %r11,STACK_FRAME_OVERHEAD(%r1) lr %r15,%r1 # TRACE_IRQS_ON already done at io_return, call # TRACE_IRQS_OFF to keep things symmetrical TRACE_IRQS_OFF - l %r1,BASED(.Lpreempt_schedule_irq) + l %r1,BASED(.Lpreempt_irq) basr %r14,%r1 # call preempt_schedule_irq - b BASED(io_return) + j io_return #else - b BASED(io_restore) + j io_restore #endif # @@ -606,9 +515,10 @@ io_work: # io_work_user: l %r1,__LC_KERNEL_STACK - s %r1,BASED(.Lc_spsize) - mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15) - xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain + ahi %r1,-(STACK_FRAME_OVERHEAD + __PT_SIZE) + mvc STACK_FRAME_OVERHEAD(__PT_SIZE,%r1),0(%r11) + xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) + la %r11,STACK_FRAME_OVERHEAD(%r1) lr %r15,%r1 # @@ -618,24 +528,24 @@ io_work_user: # io_work_tif: tm __TI_flags+3(%r12),_TIF_MCCK_PENDING - bo BASED(io_mcck_pending) + jo io_mcck_pending tm __TI_flags+3(%r12),_TIF_NEED_RESCHED - bo BASED(io_reschedule) + jo io_reschedule tm __TI_flags+3(%r12),_TIF_SIGPENDING - bo BASED(io_sigpending) + jo io_sigpending tm __TI_flags+3(%r12),_TIF_NOTIFY_RESUME - bo BASED(io_notify_resume) - b BASED(io_return) # beware of critical section cleanup + jo io_notify_resume + j io_return # beware of critical section cleanup # # _TIF_MCCK_PENDING is set, call handler # io_mcck_pending: # TRACE_IRQS_ON already done at io_return - l %r1,BASED(.Ls390_handle_mcck) + l %r1,BASED(.Lhandle_mcck) basr %r14,%r1 # TIF bit will be cleared by handler TRACE_IRQS_OFF - b BASED(io_return) + j io_return # # _TIF_NEED_RESCHED is set, call schedule @@ -643,37 +553,37 @@ io_mcck_pending: io_reschedule: # TRACE_IRQS_ON already done at io_return l %r1,BASED(.Lschedule) - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts + ssm __LC_SVC_NEW_PSW # reenable interrupts basr %r14,%r1 # call scheduler - stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts + ssm __LC_PGM_NEW_PSW # disable I/O and ext. interrupts TRACE_IRQS_OFF - b BASED(io_return) + j io_return # # _TIF_SIGPENDING is set, call do_signal # io_sigpending: # TRACE_IRQS_ON already done at io_return - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - la %r2,SP_PTREGS(%r15) # load pt_regs l %r1,BASED(.Ldo_signal) + ssm __LC_SVC_NEW_PSW # reenable interrupts + lr %r2,%r11 # pass pointer to pt_regs basr %r14,%r1 # call do_signal - stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts + ssm __LC_PGM_NEW_PSW # disable I/O and ext. interrupts TRACE_IRQS_OFF - b BASED(io_return) + j io_return # # _TIF_SIGPENDING is set, call do_signal # io_notify_resume: # TRACE_IRQS_ON already done at io_return - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - la %r2,SP_PTREGS(%r15) # load pt_regs l %r1,BASED(.Ldo_notify_resume) - basr %r14,%r1 # call do_signal - stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts + ssm __LC_SVC_NEW_PSW # reenable interrupts + lr %r2,%r11 # pass pointer to pt_regs + basr %r14,%r1 # call do_notify_resume + ssm __LC_PGM_NEW_PSW # disable I/O and ext. interrupts TRACE_IRQS_OFF - b BASED(io_return) + j io_return /* * External interrupt handler routine @@ -682,23 +592,25 @@ io_notify_resume: ENTRY(ext_int_handler) stck __LC_INT_CLOCK stpt __LC_ASYNC_ENTER_TIMER - SAVE_ALL_ASYNC __LC_EXT_OLD_PSW,__LC_SAVE_AREA+16 - CREATE_STACK_FRAME __LC_SAVE_AREA+16 - mvc SP_PSW(8,%r15),0(%r12) # move user PSW to stack - l %r12,__LC_THREAD_INFO # load pointer to thread_info struct - tm SP_PSW+1(%r15),0x01 # interrupting from user ? - bz BASED(ext_no_vtime) - UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER - UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER - mvc __LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER -ext_no_vtime: + stm %r8,%r15,__LC_SAVE_AREA_ASYNC + l %r12,__LC_THREAD_INFO + l %r13,__LC_SVC_NEW_PSW+4 + lm %r8,%r9,__LC_EXT_OLD_PSW + tmh %r8,0x0001 # interrupting from user ? + jz ext_skip + UPDATE_VTIME %r14,%r15,__LC_ASYNC_ENTER_TIMER +ext_skip: + SWITCH_ASYNC __LC_SAVE_AREA_ASYNC,__LC_ASYNC_STACK,STACK_SHIFT + stm %r0,%r7,__PT_R0(%r11) + mvc __PT_R8(32,%r11),__LC_SAVE_AREA_ASYNC + stm %r8,%r9,__PT_PSW(%r11) TRACE_IRQS_OFF - la %r2,SP_PTREGS(%r15) # address of register-save area + lr %r2,%r11 # pass pointer to pt_regs l %r3,__LC_CPU_ADDRESS # get cpu address + interruption code l %r4,__LC_EXT_PARAMS # get external parameters l %r1,BASED(.Ldo_extint) - basr %r14,%r1 - b BASED(io_return) + basr %r14,%r1 # call do_extint + j io_return __critical_end: @@ -710,82 +622,74 @@ ENTRY(mcck_int_handler) stck __LC_MCCK_CLOCK spt __LC_CPU_TIMER_SAVE_AREA # revalidate cpu timer lm %r0,%r15,__LC_GPREGS_SAVE_AREA # revalidate gprs - SAVE_ALL_BASE __LC_SAVE_AREA+32 - la %r12,__LC_MCK_OLD_PSW + l %r12,__LC_THREAD_INFO + l %r13,__LC_SVC_NEW_PSW+4 + lm %r8,%r9,__LC_MCK_OLD_PSW tm __LC_MCCK_CODE,0x80 # system damage? - bo BASED(mcck_int_main) # yes -> rest of mcck code invalid - mvc __LC_MCCK_ENTER_TIMER(8),__LC_CPU_TIMER_SAVE_AREA + jo mcck_panic # yes -> rest of mcck code invalid + la %r14,__LC_CPU_TIMER_SAVE_AREA + mvc __LC_MCCK_ENTER_TIMER(8),0(%r14) tm __LC_MCCK_CODE+5,0x02 # stored cpu timer value valid? - bo BASED(1f) + jo 3f la %r14,__LC_SYNC_ENTER_TIMER clc 0(8,%r14),__LC_ASYNC_ENTER_TIMER - bl BASED(0f) + jl 0f la %r14,__LC_ASYNC_ENTER_TIMER 0: clc 0(8,%r14),__LC_EXIT_TIMER - bl BASED(0f) + jl 1f la %r14,__LC_EXIT_TIMER -0: clc 0(8,%r14),__LC_LAST_UPDATE_TIMER - bl BASED(0f) +1: clc 0(8,%r14),__LC_LAST_UPDATE_TIMER + jl 2f la %r14,__LC_LAST_UPDATE_TIMER -0: spt 0(%r14) +2: spt 0(%r14) mvc __LC_MCCK_ENTER_TIMER(8),0(%r14) -1: tm __LC_MCCK_CODE+2,0x09 # mwp + ia of old psw valid? - bno BASED(mcck_int_main) # no -> skip cleanup critical - tm __LC_MCK_OLD_PSW+1,0x01 # test problem state bit - bnz BASED(mcck_int_main) # from user -> load async stack - clc __LC_MCK_OLD_PSW+4(4),BASED(.Lcritical_end) - bhe BASED(mcck_int_main) - clc __LC_MCK_OLD_PSW+4(4),BASED(.Lcritical_start) - bl BASED(mcck_int_main) - l %r14,BASED(.Lcleanup_critical) - basr %r14,%r14 -mcck_int_main: - l %r14,__LC_PANIC_STACK # are we already on the panic stack? - slr %r14,%r15 - sra %r14,PAGE_SHIFT - be BASED(0f) - l %r15,__LC_PANIC_STACK # load panic stack -0: s %r15,BASED(.Lc_spsize) # make room for registers & psw - CREATE_STACK_FRAME __LC_SAVE_AREA+32 - mvc SP_PSW(8,%r15),0(%r12) - l %r12,__LC_THREAD_INFO # load pointer to thread_info struct - tm __LC_MCCK_CODE+2,0x08 # mwp of old psw valid? - bno BASED(mcck_no_vtime) # no -> skip cleanup critical - tm SP_PSW+1(%r15),0x01 # interrupting from user ? - bz BASED(mcck_no_vtime) - UPDATE_VTIME __LC_EXIT_TIMER,__LC_MCCK_ENTER_TIMER,__LC_USER_TIMER - UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER - mvc __LC_LAST_UPDATE_TIMER(8),__LC_MCCK_ENTER_TIMER -mcck_no_vtime: - la %r2,SP_PTREGS(%r15) # load pt_regs - l %r1,BASED(.Ls390_mcck) - basr %r14,%r1 # call machine check handler - tm SP_PSW+1(%r15),0x01 # returning to user ? - bno BASED(mcck_return) +3: tm __LC_MCCK_CODE+2,0x09 # mwp + ia of old psw valid? + jno mcck_panic # no -> skip cleanup critical + tm %r8,0x0001 # interrupting from user ? + jz mcck_skip + UPDATE_VTIME %r14,%r15,__LC_MCCK_ENTER_TIMER +mcck_skip: + SWITCH_ASYNC __LC_GPREGS_SAVE_AREA+32,__LC_PANIC_STACK,PAGE_SHIFT + mvc __PT_R0(64,%r11),__LC_GPREGS_SAVE_AREA + stm %r8,%r9,__PT_PSW(%r11) + xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) + l %r1,BASED(.Ldo_machine_check) + lr %r2,%r11 # pass pointer to pt_regs + basr %r14,%r1 # call s390_do_machine_check + tm __PT_PSW+1(%r11),0x01 # returning to user ? + jno mcck_return l %r1,__LC_KERNEL_STACK # switch to kernel stack - s %r1,BASED(.Lc_spsize) - mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15) - xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain + ahi %r1,-(STACK_FRAME_OVERHEAD + __PT_SIZE) + mvc STACK_FRAME_OVERHEAD(__PT_SIZE,%r1),0(%r11) + xc __SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) + la %r11,STACK_FRAME_OVERHEAD(%r15) lr %r15,%r1 - stosm __SF_EMPTY(%r15),0x04 # turn dat on + ssm __LC_PGM_NEW_PSW # turn dat on, keep irqs off tm __TI_flags+3(%r12),_TIF_MCCK_PENDING - bno BASED(mcck_return) + jno mcck_return TRACE_IRQS_OFF - l %r1,BASED(.Ls390_handle_mcck) - basr %r14,%r1 # call machine check handler + l %r1,BASED(.Lhandle_mcck) + basr %r14,%r1 # call s390_handle_mcck TRACE_IRQS_ON mcck_return: - mvc __LC_RETURN_MCCK_PSW(8),SP_PSW(%r15) # move return PSW + mvc __LC_RETURN_MCCK_PSW(8),__PT_PSW(%r11) # move return PSW ni __LC_RETURN_MCCK_PSW+1,0xfd # clear wait state bit tm __LC_RETURN_MCCK_PSW+1,0x01 # returning to user ? - bno BASED(0f) - lm %r0,%r15,SP_R0(%r15) # load gprs 0-15 + jno 0f + lm %r0,%r15,__PT_R0(%r11) stpt __LC_EXIT_TIMER - lpsw __LC_RETURN_MCCK_PSW # back to caller -0: lm %r0,%r15,SP_R0(%r15) # load gprs 0-15 - lpsw __LC_RETURN_MCCK_PSW # back to caller + lpsw __LC_RETURN_MCCK_PSW +0: lm %r0,%r15,__PT_R0(%r11) + lpsw __LC_RETURN_MCCK_PSW - RESTORE_ALL __LC_RETURN_MCCK_PSW,0 +mcck_panic: + l %r14,__LC_PANIC_STACK + slr %r14,%r15 + sra %r14,PAGE_SHIFT + jz 0f + l %r15,__LC_PANIC_STACK +0: ahi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE) + j mcck_skip /* * Restart interruption handler, kick starter for additional CPUs @@ -799,18 +703,18 @@ restart_base: stck __LC_LAST_UPDATE_CLOCK mvc __LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1) mvc __LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1) - l %r15,__LC_SAVE_AREA+60 # load ksp + l %r15,__LC_GPREGS_SAVE_AREA+60 # load ksp lctl %c0,%c15,__LC_CREGS_SAVE_AREA # get new ctl regs lam %a0,%a15,__LC_AREGS_SAVE_AREA - lm %r6,%r15,__SF_GPRS(%r15) # load registers from clone + lm %r6,%r15,__SF_GPRS(%r15)# load registers from clone l %r1,__LC_THREAD_INFO mvc __LC_USER_TIMER(8),__TI_user_timer(%r1) mvc __LC_SYSTEM_TIMER(8),__TI_system_timer(%r1) xc __LC_STEAL_TIMER(8),__LC_STEAL_TIMER - stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on + ssm __LC_PGM_NEW_PSW # turn dat on, keep irqs off basr %r14,0 l %r14,restart_addr-.(%r14) - basr %r14,%r14 # branch to start_secondary + basr %r14,%r14 # call start_secondary restart_addr: .long start_secondary .align 8 @@ -835,19 +739,19 @@ restart_go: # PSW restart interrupt handler # ENTRY(psw_restart_int_handler) - st %r15,__LC_SAVE_AREA+48(%r0) # save r15 + st %r15,__LC_SAVE_AREA_RESTART basr %r15,0 0: l %r15,.Lrestart_stack-0b(%r15) # load restart stack l %r15,0(%r15) - ahi %r15,-SP_SIZE # make room for pt_regs - stm %r0,%r14,SP_R0(%r15) # store gprs %r0-%r14 to stack - mvc SP_R15(4,%r15),__LC_SAVE_AREA+48(%r0)# store saved %r15 to stack - mvc SP_PSW(8,%r15),__LC_RST_OLD_PSW(%r0) # store restart old psw - xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # set backchain to 0 + ahi %r15,-__PT_SIZE # create pt_regs on stack + stm %r0,%r14,__PT_R0(%r15) + mvc __PT_R15(4,%r15),__LC_SAVE_AREA_RESTART + mvc __PT_PSW(8,%r15),__LC_RST_OLD_PSW # store restart old psw + ahi %r15,-STACK_FRAME_OVERHEAD + xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) basr %r14,0 1: l %r14,.Ldo_restart-1b(%r14) basr %r14,%r14 - basr %r14,0 # load disabled wait PSW if 2: lpsw restart_psw_crash-2b(%r14) # do_restart returns .align 4 @@ -869,215 +773,174 @@ restart_psw_crash: */ stack_overflow: l %r15,__LC_PANIC_STACK # change to panic stack - sl %r15,BASED(.Lc_spsize) - mvc SP_PSW(8,%r15),0(%r12) # move user PSW to stack - stm %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack - la %r1,__LC_SAVE_AREA - ch %r12,BASED(.L0x020) # old psw addr == __LC_SVC_OLD_PSW ? - be BASED(0f) - ch %r12,BASED(.L0x028) # old psw addr == __LC_PGM_OLD_PSW ? - be BASED(0f) - la %r1,__LC_SAVE_AREA+16 -0: mvc SP_R12(16,%r15),0(%r1) # move %r12-%r15 to stack - xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear back chain - l %r1,BASED(1f) # branch to kernel_stack_overflow - la %r2,SP_PTREGS(%r15) # load pt_regs - br %r1 + ahi %r15,-__PT_SIZE # create pt_regs + stm %r0,%r7,__PT_R0(%r15) + stm %r8,%r9,__PT_PSW(%r15) + mvc __PT_R8(32,%r11),0(%r14) + lr %r15,%r11 + ahi %r15,-STACK_FRAME_OVERHEAD + l %r1,BASED(1f) + xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) + lr %r2,%r11 # pass pointer to pt_regs + br %r1 # branch to kernel_stack_overflow 1: .long kernel_stack_overflow #endif -cleanup_table_system_call: - .long system_call + 0x80000000, sysc_do_svc + 0x80000000 -cleanup_table_sysc_tif: - .long sysc_tif + 0x80000000, sysc_restore + 0x80000000 -cleanup_table_sysc_restore: - .long sysc_restore + 0x80000000, sysc_done + 0x80000000 -cleanup_table_io_tif: - .long io_tif + 0x80000000, io_restore + 0x80000000 -cleanup_table_io_restore: - .long io_restore + 0x80000000, io_done + 0x80000000 +cleanup_table: + .long system_call + 0x80000000 + .long sysc_do_svc + 0x80000000 + .long sysc_tif + 0x80000000 + .long sysc_restore + 0x80000000 + .long sysc_done + 0x80000000 + .long io_tif + 0x80000000 + .long io_restore + 0x80000000 + .long io_done + 0x80000000 cleanup_critical: - clc 4(4,%r12),BASED(cleanup_table_system_call) - bl BASED(0f) - clc 4(4,%r12),BASED(cleanup_table_system_call+4) - bl BASED(cleanup_system_call) -0: - clc 4(4,%r12),BASED(cleanup_table_sysc_tif) - bl BASED(0f) - clc 4(4,%r12),BASED(cleanup_table_sysc_tif+4) - bl BASED(cleanup_sysc_tif) -0: - clc 4(4,%r12),BASED(cleanup_table_sysc_restore) - bl BASED(0f) - clc 4(4,%r12),BASED(cleanup_table_sysc_restore+4) - bl BASED(cleanup_sysc_restore) -0: - clc 4(4,%r12),BASED(cleanup_table_io_tif) - bl BASED(0f) - clc 4(4,%r12),BASED(cleanup_table_io_tif+4) - bl BASED(cleanup_io_tif) -0: - clc 4(4,%r12),BASED(cleanup_table_io_restore) - bl BASED(0f) - clc 4(4,%r12),BASED(cleanup_table_io_restore+4) - bl BASED(cleanup_io_restore) -0: - br %r14 + cl %r9,BASED(cleanup_table) # system_call + jl 0f + cl %r9,BASED(cleanup_table+4) # sysc_do_svc + jl cleanup_system_call + cl %r9,BASED(cleanup_table+8) # sysc_tif + jl 0f + cl %r9,BASED(cleanup_table+12) # sysc_restore + jl cleanup_sysc_tif + cl %r9,BASED(cleanup_table+16) # sysc_done + jl cleanup_sysc_restore + cl %r9,BASED(cleanup_table+20) # io_tif + jl 0f + cl %r9,BASED(cleanup_table+24) # io_restore + jl cleanup_io_tif + cl %r9,BASED(cleanup_table+28) # io_done + jl cleanup_io_restore +0: br %r14 cleanup_system_call: - mvc __LC_RETURN_PSW(8),0(%r12) - clc __LC_RETURN_PSW+4(4),BASED(cleanup_system_call_insn+4) - bh BASED(0f) - mvc __LC_SYNC_ENTER_TIMER(8),__LC_MCCK_ENTER_TIMER - c %r12,BASED(.Lmck_old_psw) - be BASED(0f) + # check if stpt has been executed + cl %r9,BASED(cleanup_system_call_insn) + jh 0f mvc __LC_SYNC_ENTER_TIMER(8),__LC_ASYNC_ENTER_TIMER -0: c %r12,BASED(.Lmck_old_psw) - la %r12,__LC_SAVE_AREA+32 - be BASED(0f) - la %r12,__LC_SAVE_AREA+16 -0: clc __LC_RETURN_PSW+4(4),BASED(cleanup_system_call_insn+8) - bhe BASED(cleanup_vtime) - clc __LC_RETURN_PSW+4(4),BASED(cleanup_system_call_insn) - bh BASED(0f) - mvc __LC_SAVE_AREA(16),0(%r12) -0: st %r13,4(%r12) - l %r15,__LC_KERNEL_STACK # problem state -> load ksp - s %r15,BASED(.Lc_spsize) # make room for registers & psw - st %r15,12(%r12) - CREATE_STACK_FRAME __LC_SAVE_AREA - mvc 0(4,%r12),__LC_THREAD_INFO - l %r12,__LC_THREAD_INFO - mvc SP_PSW(8,%r15),__LC_SVC_OLD_PSW - mvc SP_SVC_CODE(4,%r15),__LC_SVC_ILC - oi __TI_flags+3(%r12),_TIF_SYSCALL -cleanup_vtime: - clc __LC_RETURN_PSW+4(4),BASED(cleanup_system_call_insn+12) - bhe BASED(cleanup_stime) - UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER -cleanup_stime: - clc __LC_RETURN_PSW+4(4),BASED(cleanup_system_call_insn+16) - bh BASED(cleanup_update) - UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER -cleanup_update: + chi %r11,__LC_SAVE_AREA_ASYNC + je 0f + mvc __LC_SYNC_ENTER_TIMER(8),__LC_MCCK_ENTER_TIMER +0: # check if stm has been executed + cl %r9,BASED(cleanup_system_call_insn+4) + jh 0f + mvc __LC_SAVE_AREA_SYNC(32),0(%r11) +0: # set up saved registers r12, and r13 + st %r12,16(%r11) # r12 thread-info pointer + st %r13,20(%r11) # r13 literal-pool pointer + # check if the user time calculation has been done + cl %r9,BASED(cleanup_system_call_insn+8) + jh 0f + l %r10,__LC_EXIT_TIMER + l %r15,__LC_EXIT_TIMER+4 + SUB64 %r10,%r15,__LC_SYNC_ENTER_TIMER + ADD64 %r10,%r15,__LC_USER_TIMER + st %r10,__LC_USER_TIMER + st %r15,__LC_USER_TIMER+4 +0: # check if the system time calculation has been done + cl %r9,BASED(cleanup_system_call_insn+12) + jh 0f + l %r10,__LC_LAST_UPDATE_TIMER + l %r15,__LC_LAST_UPDATE_TIMER+4 + SUB64 %r10,%r15,__LC_EXIT_TIMER + ADD64 %r10,%r15,__LC_SYSTEM_TIMER + st %r10,__LC_SYSTEM_TIMER + st %r15,__LC_SYSTEM_TIMER+4 +0: # update accounting time stamp mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER - mvc __LC_RETURN_PSW+4(4),BASED(cleanup_table_system_call+4) - la %r12,__LC_RETURN_PSW + # set up saved register 11 + l %r15,__LC_KERNEL_STACK + ahi %r15,-__PT_SIZE + st %r15,12(%r11) # r11 pt_regs pointer + # fill pt_regs + mvc __PT_R8(32,%r15),__LC_SAVE_AREA_SYNC + stm %r0,%r7,__PT_R0(%r15) + mvc __PT_PSW(8,%r15),__LC_SVC_OLD_PSW + mvc __PT_INT_CODE(4,%r15),__LC_SVC_ILC + # setup saved register 15 + ahi %r15,-STACK_FRAME_OVERHEAD + st %r15,28(%r11) # r15 stack pointer + # set new psw address and exit + l %r9,BASED(cleanup_table+4) # sysc_do_svc + 0x80000000 br %r14 cleanup_system_call_insn: - .long sysc_saveall + 0x80000000 .long system_call + 0x80000000 - .long sysc_vtime + 0x80000000 - .long sysc_stime + 0x80000000 - .long sysc_update + 0x80000000 + .long sysc_stm + 0x80000000 + .long sysc_vtime + 0x80000000 + 36 + .long sysc_vtime + 0x80000000 + 76 cleanup_sysc_tif: - mvc __LC_RETURN_PSW(4),0(%r12) - mvc __LC_RETURN_PSW+4(4),BASED(cleanup_table_sysc_tif) - la %r12,__LC_RETURN_PSW + l %r9,BASED(cleanup_table+8) # sysc_tif + 0x80000000 br %r14 cleanup_sysc_restore: - clc 4(4,%r12),BASED(cleanup_sysc_restore_insn) - be BASED(2f) - mvc __LC_EXIT_TIMER(8),__LC_MCCK_ENTER_TIMER - c %r12,BASED(.Lmck_old_psw) - be BASED(0f) - mvc __LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER -0: clc 4(4,%r12),BASED(cleanup_sysc_restore_insn+4) - be BASED(2f) - mvc __LC_RETURN_PSW(8),SP_PSW(%r15) - c %r12,BASED(.Lmck_old_psw) - la %r12,__LC_SAVE_AREA+32 - be BASED(1f) - la %r12,__LC_SAVE_AREA+16 -1: mvc 0(16,%r12),SP_R12(%r15) - lm %r0,%r11,SP_R0(%r15) - l %r15,SP_R15(%r15) -2: la %r12,__LC_RETURN_PSW + cl %r9,BASED(cleanup_sysc_restore_insn) + jhe 0f + l %r9,12(%r11) # get saved pointer to pt_regs + mvc __LC_RETURN_PSW(8),__PT_PSW(%r9) + mvc 0(32,%r11),__PT_R8(%r9) + lm %r0,%r7,__PT_R0(%r9) +0: lm %r8,%r9,__LC_RETURN_PSW br %r14 cleanup_sysc_restore_insn: .long sysc_done - 4 + 0x80000000 - .long sysc_done - 8 + 0x80000000 cleanup_io_tif: - mvc __LC_RETURN_PSW(4),0(%r12) - mvc __LC_RETURN_PSW+4(4),BASED(cleanup_table_io_tif) - la %r12,__LC_RETURN_PSW + l %r9,BASED(cleanup_table+20) # io_tif + 0x80000000 br %r14 cleanup_io_restore: - clc 4(4,%r12),BASED(cleanup_io_restore_insn) - be BASED(1f) - mvc __LC_EXIT_TIMER(8),__LC_MCCK_ENTER_TIMER - clc 4(4,%r12),BASED(cleanup_io_restore_insn+4) - be BASED(1f) - mvc __LC_RETURN_PSW(8),SP_PSW(%r15) - mvc __LC_SAVE_AREA+32(16),SP_R12(%r15) - lm %r0,%r11,SP_R0(%r15) - l %r15,SP_R15(%r15) -1: la %r12,__LC_RETURN_PSW + cl %r9,BASED(cleanup_io_restore_insn) + jhe 0f + l %r9,12(%r11) # get saved r11 pointer to pt_regs + mvc __LC_RETURN_PSW(8),__PT_PSW(%r9) + ni __LC_RETURN_PSW+1,0xfd # clear wait state bit + mvc 0(32,%r11),__PT_R8(%r9) + lm %r0,%r7,__PT_R0(%r9) +0: lm %r8,%r9,__LC_RETURN_PSW br %r14 cleanup_io_restore_insn: .long io_done - 4 + 0x80000000 - .long io_done - 8 + 0x80000000 /* * Integer constants */ - .align 4 -.Lc_spsize: .long SP_SIZE -.Lc_overhead: .long STACK_FRAME_OVERHEAD -.Lnr_syscalls: .long NR_syscalls -.L0x018: .short 0x018 -.L0x020: .short 0x020 -.L0x028: .short 0x028 -.L0x030: .short 0x030 -.L0x038: .short 0x038 -.Lc_1: .long 1 + .align 4 +.Lnr_syscalls: .long NR_syscalls /* * Symbol constants */ -.Ls390_mcck: .long s390_do_machine_check -.Ls390_handle_mcck: - .long s390_handle_mcck -.Lmck_old_psw: .long __LC_MCK_OLD_PSW -.Ldo_IRQ: .long do_IRQ -.Ldo_extint: .long do_extint -.Ldo_signal: .long do_signal -.Ldo_notify_resume: - .long do_notify_resume -.Lhandle_per: .long do_per_trap -.Ldo_execve: .long do_execve -.Lexecve_tail: .long execve_tail -.Ljump_table: .long pgm_check_table -.Lschedule: .long schedule +.Ldo_machine_check: .long s390_do_machine_check +.Lhandle_mcck: .long s390_handle_mcck +.Ldo_IRQ: .long do_IRQ +.Ldo_extint: .long do_extint +.Ldo_signal: .long do_signal +.Ldo_notify_resume: .long do_notify_resume +.Ldo_per_trap: .long do_per_trap +.Ldo_execve: .long do_execve +.Lexecve_tail: .long execve_tail +.Ljump_table: .long pgm_check_table +.Lschedule: .long schedule #ifdef CONFIG_PREEMPT -.Lpreempt_schedule_irq: - .long preempt_schedule_irq +.Lpreempt_irq: .long preempt_schedule_irq #endif -.Ltrace_entry: .long do_syscall_trace_enter -.Ltrace_exit: .long do_syscall_trace_exit -.Lschedtail: .long schedule_tail -.Lsysc_table: .long sys_call_table +.Ltrace_enter: .long do_syscall_trace_enter +.Ltrace_exit: .long do_syscall_trace_exit +.Lschedule_tail: .long schedule_tail +.Lsys_call_table: .long sys_call_table +.Lsysc_per: .long sysc_per + 0x80000000 #ifdef CONFIG_TRACE_IRQFLAGS -.Ltrace_irq_on_caller: - .long trace_hardirqs_on_caller -.Ltrace_irq_off_caller: - .long trace_hardirqs_off_caller +.Lhardirqs_on: .long trace_hardirqs_on_caller +.Lhardirqs_off: .long trace_hardirqs_off_caller #endif #ifdef CONFIG_LOCKDEP -.Llockdep_sys_exit: - .long lockdep_sys_exit +.Llockdep_sys_exit: .long lockdep_sys_exit #endif -.Lcritical_start: - .long __critical_start + 0x80000000 -.Lcritical_end: - .long __critical_end + 0x80000000 -.Lcleanup_critical: - .long cleanup_critical +.Lcritical_start: .long __critical_start + 0x80000000 +.Lcritical_length: .long __critical_end - __critical_start .section .rodata, "a" #define SYSCALL(esa,esame,emu) .long esa diff --git a/arch/s390/kernel/entry.h b/arch/s390/kernel/entry.h index ef8fb1d6e8d7..bf538aaf407d 100644 --- a/arch/s390/kernel/entry.h +++ b/arch/s390/kernel/entry.h @@ -6,15 +6,15 @@ #include <asm/ptrace.h> -extern void (*pgm_check_table[128])(struct pt_regs *, long, unsigned long); +extern void (*pgm_check_table[128])(struct pt_regs *); extern void *restart_stack; asmlinkage long do_syscall_trace_enter(struct pt_regs *regs); asmlinkage void do_syscall_trace_exit(struct pt_regs *regs); -void do_protection_exception(struct pt_regs *, long, unsigned long); -void do_dat_exception(struct pt_regs *, long, unsigned long); -void do_asce_exception(struct pt_regs *, long, unsigned long); +void do_protection_exception(struct pt_regs *regs); +void do_dat_exception(struct pt_regs *regs); +void do_asce_exception(struct pt_regs *regs); void do_per_trap(struct pt_regs *regs); void syscall_trace(struct pt_regs *regs, int entryexit); @@ -28,7 +28,7 @@ void do_extint(struct pt_regs *regs, unsigned int, unsigned int, unsigned long); void do_restart(void); int __cpuinit start_secondary(void *cpuvoid); void __init startup_init(void); -void die(const char * str, struct pt_regs * regs, long err); +void die(struct pt_regs *regs, const char *str); void __init time_init(void); diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 83a93747e2fd..412a7b8783d7 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -19,32 +19,22 @@ #include <asm/unistd.h> #include <asm/page.h> -/* - * Stack layout for the system_call stack entry. - * The first few entries are identical to the user_regs_struct. - */ -SP_PTREGS = STACK_FRAME_OVERHEAD -SP_ARGS = STACK_FRAME_OVERHEAD + __PT_ARGS -SP_PSW = STACK_FRAME_OVERHEAD + __PT_PSW -SP_R0 = STACK_FRAME_OVERHEAD + __PT_GPRS -SP_R1 = STACK_FRAME_OVERHEAD + __PT_GPRS + 8 -SP_R2 = STACK_FRAME_OVERHEAD + __PT_GPRS + 16 -SP_R3 = STACK_FRAME_OVERHEAD + __PT_GPRS + 24 -SP_R4 = STACK_FRAME_OVERHEAD + __PT_GPRS + 32 -SP_R5 = STACK_FRAME_OVERHEAD + __PT_GPRS + 40 -SP_R6 = STACK_FRAME_OVERHEAD + __PT_GPRS + 48 -SP_R7 = STACK_FRAME_OVERHEAD + __PT_GPRS + 56 -SP_R8 = STACK_FRAME_OVERHEAD + __PT_GPRS + 64 -SP_R9 = STACK_FRAME_OVERHEAD + __PT_GPRS + 72 -SP_R10 = STACK_FRAME_OVERHEAD + __PT_GPRS + 80 -SP_R11 = STACK_FRAME_OVERHEAD + __PT_GPRS + 88 -SP_R12 = STACK_FRAME_OVERHEAD + __PT_GPRS + 96 -SP_R13 = STACK_FRAME_OVERHEAD + __PT_GPRS + 104 -SP_R14 = STACK_FRAME_OVERHEAD + __PT_GPRS + 112 -SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 120 -SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2 -SP_SVC_CODE = STACK_FRAME_OVERHEAD + __PT_SVC_CODE -SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE +__PT_R0 = __PT_GPRS +__PT_R1 = __PT_GPRS + 8 +__PT_R2 = __PT_GPRS + 16 +__PT_R3 = __PT_GPRS + 24 +__PT_R4 = __PT_GPRS + 32 +__PT_R5 = __PT_GPRS + 40 +__PT_R6 = __PT_GPRS + 48 +__PT_R7 = __PT_GPRS + 56 +__PT_R8 = __PT_GPRS + 64 +__PT_R9 = __PT_GPRS + 72 +__PT_R10 = __PT_GPRS + 80 +__PT_R11 = __PT_GPRS + 88 +__PT_R12 = __PT_GPRS + 96 +__PT_R13 = __PT_GPRS + 104 +__PT_R14 = __PT_GPRS + 112 +__PT_R15 = __PT_GPRS + 120 STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER STACK_SIZE = 1 << STACK_SHIFT @@ -59,154 +49,103 @@ _TIF_EXIT_SIE = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING) #define BASED(name) name-system_call(%r13) - .macro SPP newpp -#if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE) - tm __LC_MACHINE_FLAGS+6,0x20 # MACHINE_FLAG_SPP - jz .+8 - .insn s,0xb2800000,\newpp -#endif - .endm - - .macro HANDLE_SIE_INTERCEPT -#if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE) - tm __TI_flags+6(%r12),_TIF_SIE>>8 - jz 0f - SPP __LC_CMF_HPP # set host id - clc SP_PSW+8(8,%r15),BASED(.Lsie_loop) - jl 0f - clc SP_PSW+8(8,%r15),BASED(.Lsie_done) - jhe 0f - mvc SP_PSW+8(8,%r15),BASED(.Lsie_loop) -0: -#endif - .endm - -#ifdef CONFIG_TRACE_IRQFLAGS .macro TRACE_IRQS_ON +#ifdef CONFIG_TRACE_IRQFLAGS basr %r2,%r0 brasl %r14,trace_hardirqs_on_caller +#endif .endm .macro TRACE_IRQS_OFF +#ifdef CONFIG_TRACE_IRQFLAGS basr %r2,%r0 brasl %r14,trace_hardirqs_off_caller - .endm -#else -#define TRACE_IRQS_ON -#define TRACE_IRQS_OFF #endif + .endm -#ifdef CONFIG_LOCKDEP .macro LOCKDEP_SYS_EXIT - tm SP_PSW+1(%r15),0x01 # returning to user ? - jz 0f +#ifdef CONFIG_LOCKDEP + tm __PT_PSW+1(%r11),0x01 # returning to user ? + jz .+10 brasl %r14,lockdep_sys_exit -0: - .endm -#else -#define LOCKDEP_SYS_EXIT #endif - - .macro UPDATE_VTIME lc_from,lc_to,lc_sum - lg %r10,\lc_from - slg %r10,\lc_to - alg %r10,\lc_sum - stg %r10,\lc_sum .endm -/* - * Register usage in interrupt handlers: - * R9 - pointer to current task structure - * R13 - pointer to literal pool - * R14 - return register for function calls - * R15 - kernel stack pointer - */ + .macro SPP newpp +#if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE) + tm __LC_MACHINE_FLAGS+6,0x20 # MACHINE_FLAG_SPP + jz .+8 + .insn s,0xb2800000,\newpp +#endif + .endm - .macro SAVE_ALL_SVC psworg,savearea - stmg %r11,%r15,\savearea - lg %r15,__LC_KERNEL_STACK # problem state -> load ksp - aghi %r15,-SP_SIZE # make room for registers & psw - lg %r11,__LC_LAST_BREAK + .macro HANDLE_SIE_INTERCEPT scratch +#if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE) + tm __TI_flags+6(%r12),_TIF_SIE>>8 + jz .+42 + tm __LC_MACHINE_FLAGS+6,0x20 # MACHINE_FLAG_SPP + jz .+8 + .insn s,0xb2800000,BASED(.Lhost_id) # set host id + lgr \scratch,%r9 + slg \scratch,BASED(.Lsie_loop) + clg \scratch,BASED(.Lsie_length) + jhe .+10 + lg %r9,BASED(.Lsie_loop) +#endif .endm - .macro SAVE_ALL_PGM psworg,savearea - stmg %r11,%r15,\savearea - tm \psworg+1,0x01 # test problem state bit + .macro CHECK_STACK stacksize,savearea #ifdef CONFIG_CHECK_STACK - jnz 1f - tml %r15,STACK_SIZE - CONFIG_STACK_GUARD - jnz 2f - la %r12,\psworg - j stack_overflow -#else - jz 2f + tml %r15,\stacksize - CONFIG_STACK_GUARD + lghi %r14,\savearea + jz stack_overflow #endif -1: lg %r15,__LC_KERNEL_STACK # problem state -> load ksp -2: aghi %r15,-SP_SIZE # make room for registers & psw - larl %r13,system_call - lg %r11,__LC_LAST_BREAK .endm - .macro SAVE_ALL_ASYNC psworg,savearea - stmg %r11,%r15,\savearea - larl %r13,system_call - lg %r11,__LC_LAST_BREAK - la %r12,\psworg - tm \psworg+1,0x01 # test problem state bit - jnz 1f # from user -> load kernel stack - clc \psworg+8(8),BASED(.Lcritical_end) + .macro SWITCH_ASYNC savearea,stack,shift + tmhh %r8,0x0001 # interrupting from user ? + jnz 1f + lgr %r14,%r9 + slg %r14,BASED(.Lcritical_start) + clg %r14,BASED(.Lcritical_length) jhe 0f - clc \psworg+8(8),BASED(.Lcritical_start) - jl 0f + lghi %r11,\savearea # inside critical section, do cleanup brasl %r14,cleanup_critical - tm 1(%r12),0x01 # retest problem state after cleanup + tmhh %r8,0x0001 # retest problem state after cleanup jnz 1f -0: lg %r14,__LC_ASYNC_STACK # are we already on the async. stack ? +0: lg %r14,\stack # are we already on the target stack? slgr %r14,%r15 - srag %r14,%r14,STACK_SHIFT -#ifdef CONFIG_CHECK_STACK + srag %r14,%r14,\shift jnz 1f - tml %r15,STACK_SIZE - CONFIG_STACK_GUARD - jnz 2f - j stack_overflow -#else - jz 2f -#endif -1: lg %r15,__LC_ASYNC_STACK # load async stack -2: aghi %r15,-SP_SIZE # make room for registers & psw - .endm - - .macro CREATE_STACK_FRAME savearea - xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) - stg %r2,SP_ORIG_R2(%r15) # store original content of gpr 2 - mvc SP_R11(40,%r15),\savearea # move %r11-%r15 to stack - stmg %r0,%r10,SP_R0(%r15) # store gprs %r0-%r10 to kernel stack + CHECK_STACK 1<<\shift,\savearea + j 2f +1: lg %r15,\stack # load target stack +2: aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE) + la %r11,STACK_FRAME_OVERHEAD(%r15) .endm - .macro RESTORE_ALL psworg,sync - mvc \psworg(16),SP_PSW(%r15) # move user PSW to lowcore - .if !\sync - ni \psworg+1,0xfd # clear wait state bit - .endif - lg %r14,__LC_VDSO_PER_CPU - lmg %r0,%r13,SP_R0(%r15) # load gprs 0-13 of user - stpt __LC_EXIT_TIMER - mvc __VDSO_ECTG_BASE(16,%r14),__LC_EXIT_TIMER - lmg %r14,%r15,SP_R14(%r15) # load grps 14-15 of user - lpswe \psworg # back to caller + .macro UPDATE_VTIME scratch,enter_timer + lg \scratch,__LC_EXIT_TIMER + slg \scratch,\enter_timer + alg \scratch,__LC_USER_TIMER + stg \scratch,__LC_USER_TIMER + lg \scratch,__LC_LAST_UPDATE_TIMER + slg \scratch,__LC_EXIT_TIMER + alg \scratch,__LC_SYSTEM_TIMER + stg \scratch,__LC_SYSTEM_TIMER + mvc __LC_LAST_UPDATE_TIMER(8),\enter_timer .endm - .macro LAST_BREAK - srag %r10,%r11,23 - jz 0f - stg %r11,__TI_last_break(%r12) -0: + .macro LAST_BREAK scratch + srag \scratch,%r10,23 + jz .+10 + stg %r10,__TI_last_break(%r12) .endm .macro REENABLE_IRQS - mvc __SF_EMPTY(1,%r15),SP_PSW(%r15) - ni __SF_EMPTY(%r15),0xbf - ssm __SF_EMPTY(%r15) + stg %r8,__LC_RETURN_PSW + ni __LC_RETURN_PSW,0xbf + ssm __LC_RETURN_PSW .endm .section .kprobes.text, "ax" @@ -245,55 +184,66 @@ __critical_start: ENTRY(system_call) stpt __LC_SYNC_ENTER_TIMER -sysc_saveall: - SAVE_ALL_SVC __LC_SVC_OLD_PSW,__LC_SAVE_AREA - CREATE_STACK_FRAME __LC_SAVE_AREA - lg %r12,__LC_THREAD_INFO # load pointer to thread_info struct - mvc SP_PSW(16,%r15),__LC_SVC_OLD_PSW - mvc SP_SVC_CODE(4,%r15),__LC_SVC_ILC - oi __TI_flags+7(%r12),_TIF_SYSCALL +sysc_stmg: + stmg %r8,%r15,__LC_SAVE_AREA_SYNC + lg %r10,__LC_LAST_BREAK + lg %r12,__LC_THREAD_INFO + larl %r13,system_call +sysc_per: + lg %r15,__LC_KERNEL_STACK + aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE) + la %r11,STACK_FRAME_OVERHEAD(%r15) # pointer to pt_regs sysc_vtime: - UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER -sysc_stime: - UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER -sysc_update: - mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER - LAST_BREAK + UPDATE_VTIME %r13,__LC_SYNC_ENTER_TIMER + LAST_BREAK %r13 + stmg %r0,%r7,__PT_R0(%r11) + mvc __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC + mvc __PT_PSW(16,%r11),__LC_SVC_OLD_PSW + mvc __PT_INT_CODE(4,%r11),__LC_SVC_ILC sysc_do_svc: - llgh %r7,SP_SVC_CODE+2(%r15) - slag %r7,%r7,2 # shift and test for svc 0 + oi __TI_flags+7(%r12),_TIF_SYSCALL + llgh %r8,__PT_INT_CODE+2(%r11) + slag %r8,%r8,2 # shift and test for svc 0 jnz sysc_nr_ok # svc 0: system call number in %r1 - llgfr %r1,%r1 # clear high word in r1 + llgfr %r1,%r1 # clear high word in r1 cghi %r1,NR_syscalls jnl sysc_nr_ok - sth %r1,SP_SVC_CODE+2(%r15) - slag %r7,%r1,2 # shift and test for svc 0 + sth %r1,__PT_INT_CODE+2(%r11) + slag %r8,%r1,2 sysc_nr_ok: - larl %r10,sys_call_table + larl %r10,sys_call_table # 64 bit system call table #ifdef CONFIG_COMPAT - tm __TI_flags+5(%r12),(_TIF_31BIT>>16) # running in 31 bit mode ? + tm __TI_flags+5(%r12),(_TIF_31BIT>>16) jno sysc_noemu - larl %r10,sys_call_table_emu # use 31 bit emulation system calls + larl %r10,sys_call_table_emu # 31 bit system call table sysc_noemu: #endif + xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) + stg %r2,__PT_ORIG_GPR2(%r11) + stg %r7,STACK_FRAME_OVERHEAD(%r15) + lgf %r9,0(%r8,%r10) # get system call add. tm __TI_flags+6(%r12),_TIF_TRACE >> 8 - mvc SP_ARGS(8,%r15),SP_R7(%r15) - lgf %r8,0(%r7,%r10) # load address of system call routine jnz sysc_tracesys - basr %r14,%r8 # call sys_xxxx - stg %r2,SP_R2(%r15) # store return value (change R2 on stack) + basr %r14,%r9 # call sys_xxxx + stg %r2,__PT_R2(%r11) # store return value sysc_return: LOCKDEP_SYS_EXIT sysc_tif: - tm SP_PSW+1(%r15),0x01 # returning to user ? + tm __PT_PSW+1(%r11),0x01 # returning to user ? jno sysc_restore tm __TI_flags+7(%r12),_TIF_WORK_SVC - jnz sysc_work # there is work to do (signals etc.) + jnz sysc_work # check for work ni __TI_flags+7(%r12),255-_TIF_SYSCALL sysc_restore: - RESTORE_ALL __LC_RETURN_PSW,1 + lg %r14,__LC_VDSO_PER_CPU + lmg %r0,%r10,__PT_R0(%r11) + mvc __LC_RETURN_PSW(16),__PT_PSW(%r11) + stpt __LC_EXIT_TIMER + mvc __VDSO_ECTG_BASE(16,%r14),__LC_EXIT_TIMER + lmg %r11,%r15,__PT_R11(%r11) + lpswe __LC_RETURN_PSW sysc_done: # @@ -317,7 +267,7 @@ sysc_work: # sysc_reschedule: larl %r14,sysc_return - jg schedule # return point is sysc_return + jg schedule # # _TIF_MCCK_PENDING is set, call handler @@ -331,33 +281,33 @@ sysc_mcck_pending: # sysc_sigpending: ni __TI_flags+7(%r12),255-_TIF_PER_TRAP # clear TIF_PER_TRAP - la %r2,SP_PTREGS(%r15) # load pt_regs - brasl %r14,do_signal # call do_signal + lgr %r2,%r11 # pass pointer to pt_regs + brasl %r14,do_signal tm __TI_flags+7(%r12),_TIF_SYSCALL jno sysc_return - lmg %r2,%r6,SP_R2(%r15) # load svc arguments - lghi %r7,0 # svc 0 returns -ENOSYS - lh %r1,SP_SVC_CODE+2(%r15) # load new svc number + lmg %r2,%r7,__PT_R2(%r11) # load svc arguments + lghi %r8,0 # svc 0 returns -ENOSYS + lh %r1,__PT_INT_CODE+2(%r11) # load new svc number cghi %r1,NR_syscalls jnl sysc_nr_ok # invalid svc number -> do svc 0 - slag %r7,%r1,2 + slag %r8,%r1,2 j sysc_nr_ok # restart svc # # _TIF_NOTIFY_RESUME is set, call do_notify_resume # sysc_notify_resume: - la %r2,SP_PTREGS(%r15) # load pt_regs + lgr %r2,%r11 # pass pointer to pt_regs larl %r14,sysc_return - jg do_notify_resume # call do_notify_resume + jg do_notify_resume # # _TIF_PER_TRAP is set, call do_per_trap # sysc_singlestep: ni __TI_flags+7(%r12),255-(_TIF_SYSCALL | _TIF_PER_TRAP) - la %r2,SP_PTREGS(%r15) # address of register-save area - larl %r14,sysc_return # load adr. of system return + lgr %r2,%r11 # pass pointer to pt_regs + larl %r14,sysc_return jg do_per_trap # @@ -365,41 +315,41 @@ sysc_singlestep: # and after the system call # sysc_tracesys: - la %r2,SP_PTREGS(%r15) # load pt_regs + lgr %r2,%r11 # pass pointer to pt_regs la %r3,0 - llgh %r0,SP_SVC_CODE+2(%r15) - stg %r0,SP_R2(%r15) + llgh %r0,__PT_INT_CODE+2(%r11) + stg %r0,__PT_R2(%r11) brasl %r14,do_syscall_trace_enter lghi %r0,NR_syscalls clgr %r0,%r2 jnh sysc_tracenogo - sllg %r7,%r2,2 # svc number *4 - lgf %r8,0(%r7,%r10) + sllg %r8,%r2,2 + lgf %r9,0(%r8,%r10) sysc_tracego: - lmg %r3,%r6,SP_R3(%r15) - mvc SP_ARGS(8,%r15),SP_R7(%r15) - lg %r2,SP_ORIG_R2(%r15) - basr %r14,%r8 # call sys_xxx - stg %r2,SP_R2(%r15) # store return value + lmg %r3,%r7,__PT_R3(%r11) + stg %r7,STACK_FRAME_OVERHEAD(%r15) + lg %r2,__PT_ORIG_GPR2(%r11) + basr %r14,%r9 # call sys_xxx + stg %r2,__PT_R2(%r11) # store return value sysc_tracenogo: tm __TI_flags+6(%r12),_TIF_TRACE >> 8 jz sysc_return - la %r2,SP_PTREGS(%r15) # load pt_regs - larl %r14,sysc_return # return point is sysc_return + lgr %r2,%r11 # pass pointer to pt_regs + larl %r14,sysc_return jg do_syscall_trace_exit # # a new process exits the kernel with ret_from_fork # ENTRY(ret_from_fork) - lg %r13,__LC_SVC_NEW_PSW+8 - lg %r12,__LC_THREAD_INFO # load pointer to thread_info struct - tm SP_PSW+1(%r15),0x01 # forking a kernel thread ? + la %r11,STACK_FRAME_OVERHEAD(%r15) + lg %r12,__LC_THREAD_INFO + tm __PT_PSW+1(%r11),0x01 # forking a kernel thread ? jo 0f - stg %r15,SP_R15(%r15) # store stack pointer for new kthread + stg %r15,__PT_R15(%r11) # store stack pointer for new kthread 0: brasl %r14,schedule_tail TRACE_IRQS_ON - stosm 24(%r15),0x03 # reenable interrupts + ssm __LC_SVC_NEW_PSW # reenable interrupts j sysc_tracenogo # @@ -409,26 +359,26 @@ ENTRY(ret_from_fork) ENTRY(kernel_execve) stmg %r12,%r15,96(%r15) lgr %r14,%r15 - aghi %r15,-SP_SIZE + aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE) stg %r14,__SF_BACKCHAIN(%r15) - la %r12,SP_PTREGS(%r15) + la %r12,STACK_FRAME_OVERHEAD(%r15) xc 0(__PT_SIZE,%r12),0(%r12) lgr %r5,%r12 brasl %r14,do_execve ltgfr %r2,%r2 je 0f - aghi %r15,SP_SIZE + aghi %r15,(STACK_FRAME_OVERHEAD + __PT_SIZE) lmg %r12,%r15,96(%r15) br %r14 # execve succeeded. -0: stnsm __SF_EMPTY(%r15),0xfc # disable interrupts +0: ssm __LC_PGM_NEW_PSW # disable I/O and ext. interrupts lg %r15,__LC_KERNEL_STACK # load ksp - aghi %r15,-SP_SIZE # make room for registers & psw - lg %r13,__LC_SVC_NEW_PSW+8 - mvc SP_PTREGS(__PT_SIZE,%r15),0(%r12) # copy pt_regs + aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE) + la %r11,STACK_FRAME_OVERHEAD(%r15) + mvc 0(__PT_SIZE,%r11),0(%r12) # copy pt_regs lg %r12,__LC_THREAD_INFO xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts + ssm __LC_SVC_NEW_PSW # reenable interrupts brasl %r14,execve_tail j sysc_return @@ -437,127 +387,72 @@ ENTRY(kernel_execve) */ ENTRY(pgm_check_handler) -/* - * First we need to check for a special case: - * Single stepping an instruction that disables the PER event mask will - * cause a PER event AFTER the mask has been set. Example: SVC or LPSW. - * For a single stepped SVC the program check handler gets control after - * the SVC new PSW has been loaded. But we want to execute the SVC first and - * then handle the PER event. Therefore we update the SVC old PSW to point - * to the pgm_check_handler and branch to the SVC handler after we checked - * if we have to load the kernel stack register. - * For every other possible cause for PER event without the PER mask set - * we just ignore the PER event (FIXME: is there anything we have to do - * for LPSW?). - */ stpt __LC_SYNC_ENTER_TIMER - tm __LC_PGM_INT_CODE+1,0x80 # check whether we got a per exception - jnz pgm_per # got per exception -> special case - SAVE_ALL_PGM __LC_PGM_OLD_PSW,__LC_SAVE_AREA - CREATE_STACK_FRAME __LC_SAVE_AREA - mvc SP_PSW(16,%r15),__LC_PGM_OLD_PSW - lg %r12,__LC_THREAD_INFO # load pointer to thread_info struct - HANDLE_SIE_INTERCEPT - tm SP_PSW+1(%r15),0x01 # interrupting from user ? - jz pgm_no_vtime - UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER - UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER - mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER - LAST_BREAK -pgm_no_vtime: - stg %r11,SP_ARGS(%r15) - lgf %r3,__LC_PGM_ILC # load program interruption code - lg %r4,__LC_TRANS_EXC_CODE - REENABLE_IRQS - lghi %r8,0x7f - ngr %r8,%r3 - sll %r8,3 - larl %r1,pgm_check_table - lg %r1,0(%r8,%r1) # load address of handler routine - la %r2,SP_PTREGS(%r15) # address of register-save area - basr %r14,%r1 # branch to interrupt-handler -pgm_exit: - j sysc_return - -# -# handle per exception -# -pgm_per: - tm __LC_PGM_OLD_PSW,0x40 # test if per event recording is on - jnz pgm_per_std # ok, normal per event from user space -# ok its one of the special cases, now we need to find out which one - clc __LC_PGM_OLD_PSW(16),__LC_SVC_NEW_PSW - je pgm_svcper -# no interesting special case, ignore PER event - lpswe __LC_PGM_OLD_PSW - -# -# Normal per exception -# -pgm_per_std: - SAVE_ALL_PGM __LC_PGM_OLD_PSW,__LC_SAVE_AREA - CREATE_STACK_FRAME __LC_SAVE_AREA - mvc SP_PSW(16,%r15),__LC_PGM_OLD_PSW - lg %r12,__LC_THREAD_INFO # load pointer to thread_info struct - HANDLE_SIE_INTERCEPT - tm SP_PSW+1(%r15),0x01 # interrupting from user ? - jz pgm_no_vtime2 - UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER - UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER - mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER - LAST_BREAK -pgm_no_vtime2: + stmg %r8,%r15,__LC_SAVE_AREA_SYNC + lg %r10,__LC_LAST_BREAK + lg %r12,__LC_THREAD_INFO + larl %r13,system_call + lmg %r8,%r9,__LC_PGM_OLD_PSW + HANDLE_SIE_INTERCEPT %r14 + tmhh %r8,0x0001 # test problem state bit + jnz 1f # -> fault in user space + tmhh %r8,0x4000 # PER bit set in old PSW ? + jnz 0f # -> enabled, can't be a double fault + tm __LC_PGM_ILC+3,0x80 # check for per exception + jnz pgm_svcper # -> single stepped svc +0: CHECK_STACK STACK_SIZE,__LC_SAVE_AREA_SYNC + j 2f +1: UPDATE_VTIME %r14,__LC_SYNC_ENTER_TIMER + LAST_BREAK %r14 + lg %r15,__LC_KERNEL_STACK +2: aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE) + la %r11,STACK_FRAME_OVERHEAD(%r15) + stmg %r0,%r7,__PT_R0(%r11) + mvc __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC + stmg %r8,%r9,__PT_PSW(%r11) + mvc __PT_INT_CODE(4,%r11),__LC_PGM_ILC + mvc __PT_INT_PARM_LONG(8,%r11),__LC_TRANS_EXC_CODE + stg %r10,__PT_ARGS(%r11) + tm __LC_PGM_ILC+3,0x80 # check for per exception + jz 0f lg %r1,__TI_task(%r12) - tm SP_PSW+1(%r15),0x01 # kernel per event ? - jz kernel_per - mvc __THREAD_per_cause(2,%r1),__LC_PER_CAUSE + tmhh %r8,0x0001 # kernel per event ? + jz pgm_kprobe + oi __TI_flags+7(%r12),_TIF_PER_TRAP mvc __THREAD_per_address(8,%r1),__LC_PER_ADDRESS + mvc __THREAD_per_cause(2,%r1),__LC_PER_CAUSE mvc __THREAD_per_paid(1,%r1),__LC_PER_PAID - oi __TI_flags+7(%r12),_TIF_PER_TRAP # set TIF_PER_TRAP - lgf %r3,__LC_PGM_ILC # load program interruption code - lg %r4,__LC_TRANS_EXC_CODE - REENABLE_IRQS - lghi %r8,0x7f - ngr %r8,%r3 # clear per-event-bit and ilc - je pgm_exit2 - sll %r8,3 +0: REENABLE_IRQS + xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) larl %r1,pgm_check_table - lg %r1,0(%r8,%r1) # load address of handler routine - la %r2,SP_PTREGS(%r15) # address of register-save area + llgh %r10,__PT_INT_CODE+2(%r11) + nill %r10,0x007f + sll %r10,3 + je sysc_return + lg %r1,0(%r10,%r1) # load address of handler routine + lgr %r2,%r11 # pass pointer to pt_regs basr %r14,%r1 # branch to interrupt-handler -pgm_exit2: j sysc_return # -# it was a single stepped SVC that is causing all the trouble +# PER event in supervisor state, must be kprobes # -pgm_svcper: - SAVE_ALL_PGM __LC_SVC_OLD_PSW,__LC_SAVE_AREA - CREATE_STACK_FRAME __LC_SAVE_AREA - lg %r12,__LC_THREAD_INFO # load pointer to thread_info struct - mvc SP_PSW(16,%r15),__LC_SVC_OLD_PSW - mvc SP_SVC_CODE(4,%r15),__LC_SVC_ILC - oi __TI_flags+7(%r12),(_TIF_SYSCALL | _TIF_PER_TRAP) - UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER - UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER - mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER - LAST_BREAK - lg %r8,__TI_task(%r12) - mvc __THREAD_per_cause(2,%r8),__LC_PER_CAUSE - mvc __THREAD_per_address(8,%r8),__LC_PER_ADDRESS - mvc __THREAD_per_paid(1,%r8),__LC_PER_PAID - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - lmg %r2,%r6,SP_R2(%r15) # load svc arguments - j sysc_do_svc +pgm_kprobe: + REENABLE_IRQS + xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) + lgr %r2,%r11 # pass pointer to pt_regs + brasl %r14,do_per_trap + j sysc_return # -# per was called from kernel, must be kprobes +# single stepped system call # -kernel_per: - REENABLE_IRQS - la %r2,SP_PTREGS(%r15) # address of register-save area - brasl %r14,do_per_trap - j pgm_exit +pgm_svcper: + oi __TI_flags+7(%r12),_TIF_PER_TRAP + mvc __LC_RETURN_PSW(8),__LC_SVC_NEW_PSW + larl %r14,sysc_per + stg %r14,__LC_RETURN_PSW+8 + lpswe __LC_RETURN_PSW # branch to sysc_per and enable irqs /* * IO interrupt handler routine @@ -565,21 +460,25 @@ kernel_per: ENTRY(io_int_handler) stck __LC_INT_CLOCK stpt __LC_ASYNC_ENTER_TIMER - SAVE_ALL_ASYNC __LC_IO_OLD_PSW,__LC_SAVE_AREA+40 - CREATE_STACK_FRAME __LC_SAVE_AREA+40 - mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack - lg %r12,__LC_THREAD_INFO # load pointer to thread_info struct - HANDLE_SIE_INTERCEPT - tm SP_PSW+1(%r15),0x01 # interrupting from user ? - jz io_no_vtime - UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER - UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER - mvc __LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER - LAST_BREAK -io_no_vtime: + stmg %r8,%r15,__LC_SAVE_AREA_ASYNC + lg %r10,__LC_LAST_BREAK + lg %r12,__LC_THREAD_INFO + larl %r13,system_call + lmg %r8,%r9,__LC_IO_OLD_PSW + HANDLE_SIE_INTERCEPT %r14 + SWITCH_ASYNC __LC_SAVE_AREA_ASYNC,__LC_ASYNC_STACK,STACK_SHIFT + tmhh %r8,0x0001 # interrupting from user? + jz io_skip + UPDATE_VTIME %r14,__LC_ASYNC_ENTER_TIMER + LAST_BREAK %r14 +io_skip: + stmg %r0,%r7,__PT_R0(%r11) + mvc __PT_R8(64,%r11),__LC_SAVE_AREA_ASYNC + stmg %r8,%r9,__PT_PSW(%r11) TRACE_IRQS_OFF - la %r2,SP_PTREGS(%r15) # address of register-save area - brasl %r14,do_IRQ # call standard irq handler + xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) + lgr %r2,%r11 # pass pointer to pt_regs + brasl %r14,do_IRQ io_return: LOCKDEP_SYS_EXIT TRACE_IRQS_ON @@ -587,7 +486,14 @@ io_tif: tm __TI_flags+7(%r12),_TIF_WORK_INT jnz io_work # there is work to do (signals etc.) io_restore: - RESTORE_ALL __LC_RETURN_PSW,0 + lg %r14,__LC_VDSO_PER_CPU + lmg %r0,%r10,__PT_R0(%r11) + mvc __LC_RETURN_PSW(16),__PT_PSW(%r11) + ni __LC_RETURN_PSW+1,0xfd # clear wait state bit + stpt __LC_EXIT_TIMER + mvc __VDSO_ECTG_BASE(16,%r14),__LC_EXIT_TIMER + lmg %r11,%r15,__PT_R11(%r11) + lpswe __LC_RETURN_PSW io_done: # @@ -600,7 +506,7 @@ io_done: # Before any work can be done, a switch to the kernel stack is required. # io_work: - tm SP_PSW+1(%r15),0x01 # returning to user ? + tm __PT_PSW+1(%r11),0x01 # returning to user ? jo io_work_user # yes -> do resched & signal #ifdef CONFIG_PREEMPT # check for preemptive scheduling @@ -609,10 +515,11 @@ io_work: tm __TI_flags+7(%r12),_TIF_NEED_RESCHED jno io_restore # switch to kernel stack - lg %r1,SP_R15(%r15) - aghi %r1,-SP_SIZE - mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15) - xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain + lg %r1,__PT_R15(%r11) + aghi %r1,-(STACK_FRAME_OVERHEAD + __PT_SIZE) + mvc STACK_FRAME_OVERHEAD(__PT_SIZE,%r1),0(%r11) + xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) + la %r11,STACK_FRAME_OVERHEAD(%r1) lgr %r15,%r1 # TRACE_IRQS_ON already done at io_return, call # TRACE_IRQS_OFF to keep things symmetrical @@ -628,9 +535,10 @@ io_work: # io_work_user: lg %r1,__LC_KERNEL_STACK - aghi %r1,-SP_SIZE - mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15) - xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain + aghi %r1,-(STACK_FRAME_OVERHEAD + __PT_SIZE) + mvc STACK_FRAME_OVERHEAD(__PT_SIZE,%r1),0(%r11) + xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) + la %r11,STACK_FRAME_OVERHEAD(%r1) lgr %r15,%r1 # @@ -663,9 +571,9 @@ io_mcck_pending: # io_reschedule: # TRACE_IRQS_ON already done at io_return - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts + ssm __LC_SVC_NEW_PSW # reenable interrupts brasl %r14,schedule # call scheduler - stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts + ssm __LC_PGM_NEW_PSW # disable I/O and ext. interrupts TRACE_IRQS_OFF j io_return @@ -674,10 +582,10 @@ io_reschedule: # io_sigpending: # TRACE_IRQS_ON already done at io_return - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - la %r2,SP_PTREGS(%r15) # load pt_regs - brasl %r14,do_signal # call do_signal - stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts + ssm __LC_SVC_NEW_PSW # reenable interrupts + lgr %r2,%r11 # pass pointer to pt_regs + brasl %r14,do_signal + ssm __LC_PGM_NEW_PSW # disable I/O and ext. interrupts TRACE_IRQS_OFF j io_return @@ -686,10 +594,10 @@ io_sigpending: # io_notify_resume: # TRACE_IRQS_ON already done at io_return - stosm __SF_EMPTY(%r15),0x03 # reenable interrupts - la %r2,SP_PTREGS(%r15) # load pt_regs - brasl %r14,do_notify_resume # call do_notify_resume - stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts + ssm __LC_SVC_NEW_PSW # reenable interrupts + lgr %r2,%r11 # pass pointer to pt_regs + brasl %r14,do_notify_resume + ssm __LC_PGM_NEW_PSW # disable I/O and ext. interrupts TRACE_IRQS_OFF j io_return @@ -699,21 +607,24 @@ io_notify_resume: ENTRY(ext_int_handler) stck __LC_INT_CLOCK stpt __LC_ASYNC_ENTER_TIMER - SAVE_ALL_ASYNC __LC_EXT_OLD_PSW,__LC_SAVE_AREA+40 - CREATE_STACK_FRAME __LC_SAVE_AREA+40 - mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack - lg %r12,__LC_THREAD_INFO # load pointer to thread_info struct - HANDLE_SIE_INTERCEPT - tm SP_PSW+1(%r15),0x01 # interrupting from user ? - jz ext_no_vtime - UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER - UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER - mvc __LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER - LAST_BREAK -ext_no_vtime: + stmg %r8,%r15,__LC_SAVE_AREA_ASYNC + lg %r10,__LC_LAST_BREAK + lg %r12,__LC_THREAD_INFO + larl %r13,system_call + lmg %r8,%r9,__LC_EXT_OLD_PSW + HANDLE_SIE_INTERCEPT %r14 + SWITCH_ASYNC __LC_SAVE_AREA_ASYNC,__LC_ASYNC_STACK,STACK_SHIFT + tmhh %r8,0x0001 # interrupting from user ? + jz ext_skip + UPDATE_VTIME %r14,__LC_ASYNC_ENTER_TIMER + LAST_BREAK %r14 +ext_skip: + stmg %r0,%r7,__PT_R0(%r11) + mvc __PT_R8(64,%r11),__LC_SAVE_AREA_ASYNC + stmg %r8,%r9,__PT_PSW(%r11) TRACE_IRQS_OFF lghi %r1,4096 - la %r2,SP_PTREGS(%r15) # address of register-save area + lgr %r2,%r11 # pass pointer to pt_regs llgf %r3,__LC_CPU_ADDRESS # get cpu address + interruption code llgf %r4,__LC_EXT_PARAMS # get external parameter lg %r5,__LC_EXT_PARAMS2-4096(%r1) # get 64 bit external parameter @@ -730,81 +641,77 @@ ENTRY(mcck_int_handler) la %r1,4095 # revalidate r1 spt __LC_CPU_TIMER_SAVE_AREA-4095(%r1) # revalidate cpu timer lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)# revalidate gprs - stmg %r11,%r15,__LC_SAVE_AREA+80 + lg %r10,__LC_LAST_BREAK + lg %r12,__LC_THREAD_INFO larl %r13,system_call - lg %r11,__LC_LAST_BREAK - la %r12,__LC_MCK_OLD_PSW + lmg %r8,%r9,__LC_MCK_OLD_PSW + HANDLE_SIE_INTERCEPT %r14 tm __LC_MCCK_CODE,0x80 # system damage? - jo mcck_int_main # yes -> rest of mcck code invalid - la %r14,4095 - mvc __LC_MCCK_ENTER_TIMER(8),__LC_CPU_TIMER_SAVE_AREA-4095(%r14) + jo mcck_panic # yes -> rest of mcck code invalid + lghi %r14,__LC_CPU_TIMER_SAVE_AREA + mvc __LC_MCCK_ENTER_TIMER(8),0(%r14) tm __LC_MCCK_CODE+5,0x02 # stored cpu timer value valid? - jo 1f + jo 3f la %r14,__LC_SYNC_ENTER_TIMER clc 0(8,%r14),__LC_ASYNC_ENTER_TIMER jl 0f la %r14,__LC_ASYNC_ENTER_TIMER 0: clc 0(8,%r14),__LC_EXIT_TIMER - jl 0f + jl 1f la %r14,__LC_EXIT_TIMER -0: clc 0(8,%r14),__LC_LAST_UPDATE_TIMER - jl 0f +1: clc 0(8,%r14),__LC_LAST_UPDATE_TIMER + jl 2f la %r14,__LC_LAST_UPDATE_TIMER -0: spt 0(%r14) +2: spt 0(%r14) mvc __LC_MCCK_ENTER_TIMER(8),0(%r14) -1: tm __LC_MCCK_CODE+2,0x09 # mwp + ia of old psw valid? - jno mcck_int_main # no -> skip cleanup critical - tm __LC_MCK_OLD_PSW+1,0x01 # test problem state bit - jnz mcck_int_main # from user -> load kernel stack - clc __LC_MCK_OLD_PSW+8(8),BASED(.Lcritical_end) - jhe mcck_int_main - clc __LC_MCK_OLD_PSW+8(8),BASED(.Lcritical_start) - jl mcck_int_main - brasl %r14,cleanup_critical -mcck_int_main: - lg %r14,__LC_PANIC_STACK # are we already on the panic stack? - slgr %r14,%r15 - srag %r14,%r14,PAGE_SHIFT - jz 0f - lg %r15,__LC_PANIC_STACK # load panic stack -0: aghi %r15,-SP_SIZE # make room for registers & psw - CREATE_STACK_FRAME __LC_SAVE_AREA+80 - mvc SP_PSW(16,%r15),0(%r12) - lg %r12,__LC_THREAD_INFO # load pointer to thread_info struct - tm __LC_MCCK_CODE+2,0x08 # mwp of old psw valid? - jno mcck_no_vtime # no -> no timer update - HANDLE_SIE_INTERCEPT - tm SP_PSW+1(%r15),0x01 # interrupting from user ? - jz mcck_no_vtime - UPDATE_VTIME __LC_EXIT_TIMER,__LC_MCCK_ENTER_TIMER,__LC_USER_TIMER - UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER - mvc __LC_LAST_UPDATE_TIMER(8),__LC_MCCK_ENTER_TIMER - LAST_BREAK -mcck_no_vtime: - la %r2,SP_PTREGS(%r15) # load pt_regs +3: tm __LC_MCCK_CODE+2,0x09 # mwp + ia of old psw valid? + jno mcck_panic # no -> skip cleanup critical + SWITCH_ASYNC __LC_GPREGS_SAVE_AREA+64,__LC_PANIC_STACK,PAGE_SHIFT + tm %r8,0x0001 # interrupting from user ? + jz mcck_skip + UPDATE_VTIME %r14,__LC_MCCK_ENTER_TIMER + LAST_BREAK %r14 +mcck_skip: + lghi %r14,__LC_GPREGS_SAVE_AREA + mvc __PT_R0(128,%r11),0(%r14) + stmg %r8,%r9,__PT_PSW(%r11) + xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) + lgr %r2,%r11 # pass pointer to pt_regs brasl %r14,s390_do_machine_check - tm SP_PSW+1(%r15),0x01 # returning to user ? + tm __PT_PSW+1(%r11),0x01 # returning to user ? jno mcck_return lg %r1,__LC_KERNEL_STACK # switch to kernel stack - aghi %r1,-SP_SIZE - mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15) - xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain + aghi %r1,-(STACK_FRAME_OVERHEAD + __PT_SIZE) + mvc STACK_FRAME_OVERHEAD(__PT_SIZE,%r1),0(%r11) + xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) + la %r11,STACK_FRAME_OVERHEAD(%r1) lgr %r15,%r1 - stosm __SF_EMPTY(%r15),0x04 # turn dat on + ssm __LC_PGM_NEW_PSW # turn dat on, keep irqs off tm __TI_flags+7(%r12),_TIF_MCCK_PENDING jno mcck_return TRACE_IRQS_OFF brasl %r14,s390_handle_mcck TRACE_IRQS_ON mcck_return: - mvc __LC_RETURN_MCCK_PSW(16),SP_PSW(%r15) # move return PSW + lg %r14,__LC_VDSO_PER_CPU + lmg %r0,%r10,__PT_R0(%r11) + mvc __LC_RETURN_MCCK_PSW(16),__PT_PSW(%r11) # move return PSW ni __LC_RETURN_MCCK_PSW+1,0xfd # clear wait state bit - lmg %r0,%r15,SP_R0(%r15) # load gprs 0-15 tm __LC_RETURN_MCCK_PSW+1,0x01 # returning to user ? jno 0f stpt __LC_EXIT_TIMER -0: lpswe __LC_RETURN_MCCK_PSW # back to caller -mcck_done: + mvc __VDSO_ECTG_BASE(16,%r14),__LC_EXIT_TIMER +0: lmg %r11,%r15,__PT_R11(%r11) + lpswe __LC_RETURN_MCCK_PSW + +mcck_panic: + lg %r14,__LC_PANIC_STACK + slgr %r14,%r15 + srag %r14,%r14,PAGE_SHIFT + jz 0f + lg %r15,__LC_PANIC_STACK +0: aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE) + j mcck_skip /* * Restart interruption handler, kick starter for additional CPUs @@ -818,17 +725,18 @@ restart_base: stck __LC_LAST_UPDATE_CLOCK mvc __LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1) mvc __LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1) - lg %r15,__LC_SAVE_AREA+120 # load ksp + lghi %r10,__LC_GPREGS_SAVE_AREA + lg %r15,120(%r10) # load ksp lghi %r10,__LC_CREGS_SAVE_AREA - lctlg %c0,%c15,0(%r10) # get new ctl regs + lctlg %c0,%c15,0(%r10) # get new ctl regs lghi %r10,__LC_AREGS_SAVE_AREA lam %a0,%a15,0(%r10) - lmg %r6,%r15,__SF_GPRS(%r15) # load registers from clone + lmg %r6,%r15,__SF_GPRS(%r15)# load registers from clone lg %r1,__LC_THREAD_INFO mvc __LC_USER_TIMER(8),__TI_user_timer(%r1) mvc __LC_SYSTEM_TIMER(8),__TI_system_timer(%r1) xc __LC_STEAL_TIMER(8),__LC_STEAL_TIMER - stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on + ssm __LC_PGM_NEW_PSW # turn dat on, keep irqs off brasl %r14,start_secondary .align 8 restart_vtime: @@ -852,16 +760,16 @@ restart_go: # PSW restart interrupt handler # ENTRY(psw_restart_int_handler) - stg %r15,__LC_SAVE_AREA+120(%r0) # save r15 + stg %r15,__LC_SAVE_AREA_RESTART larl %r15,restart_stack # load restart stack lg %r15,0(%r15) - aghi %r15,-SP_SIZE # make room for pt_regs - stmg %r0,%r14,SP_R0(%r15) # store gprs %r0-%r14 to stack - mvc SP_R15(8,%r15),__LC_SAVE_AREA+120(%r0)# store saved %r15 to stack - mvc SP_PSW(16,%r15),__LC_RST_OLD_PSW(%r0)# store restart old psw - xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) # set backchain to 0 + aghi %r15,-__PT_SIZE # create pt_regs on stack + stmg %r0,%r14,__PT_R0(%r15) + mvc __PT_R15(8,%r15),__LC_SAVE_AREA_RESTART + mvc __PT_PSW(16,%r15),__LC_RST_OLD_PSW # store restart old psw + aghi %r15,-STACK_FRAME_OVERHEAD + xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) brasl %r14,do_restart - larl %r14,restart_psw_crash # load disabled wait PSW if lpswe 0(%r14) # do_restart returns .align 8 @@ -877,172 +785,153 @@ restart_psw_crash: * Setup a pt_regs so that show_trace can provide a good call trace. */ stack_overflow: - lg %r15,__LC_PANIC_STACK # change to panic stack - aghi %r15,-SP_SIZE - mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack - stmg %r0,%r10,SP_R0(%r15) # store gprs %r0-%r10 to kernel stack - la %r1,__LC_SAVE_AREA - chi %r12,__LC_SVC_OLD_PSW - je 0f - chi %r12,__LC_PGM_OLD_PSW - je 0f - la %r1,__LC_SAVE_AREA+40 -0: mvc SP_R11(40,%r15),0(%r1) # move %r11-%r15 to stack - mvc SP_ARGS(8,%r15),__LC_LAST_BREAK - xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) # clear back chain - la %r2,SP_PTREGS(%r15) # load pt_regs + lg %r11,__LC_PANIC_STACK # change to panic stack + aghi %r11,-__PT_SIZE # create pt_regs + stmg %r0,%r7,__PT_R0(%r11) + stmg %r8,%r9,__PT_PSW(%r11) + mvc __PT_R8(64,%r11),0(%r14) + stg %r10,__PT_ORIG_GPR2(%r11) # store last break to orig_gpr2 + lgr %r15,%r11 + aghi %r15,-STACK_FRAME_OVERHEAD + xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) + lgr %r2,%r11 # pass pointer to pt_regs jg kernel_stack_overflow #endif -cleanup_table_system_call: - .quad system_call, sysc_do_svc -cleanup_table_sysc_tif: - .quad sysc_tif, sysc_restore -cleanup_table_sysc_restore: - .quad sysc_restore, sysc_done -cleanup_table_io_tif: - .quad io_tif, io_restore -cleanup_table_io_restore: - .quad io_restore, io_done + .align 8 +cleanup_table: + .quad system_call + .quad sysc_do_svc + .quad sysc_tif + .quad sysc_restore + .quad sysc_done + .quad io_tif + .quad io_restore + .quad io_done cleanup_critical: - clc 8(8,%r12),BASED(cleanup_table_system_call) + clg %r9,BASED(cleanup_table) # system_call jl 0f - clc 8(8,%r12),BASED(cleanup_table_system_call+8) + clg %r9,BASED(cleanup_table+8) # sysc_do_svc jl cleanup_system_call -0: - clc 8(8,%r12),BASED(cleanup_table_sysc_tif) + clg %r9,BASED(cleanup_table+16) # sysc_tif jl 0f - clc 8(8,%r12),BASED(cleanup_table_sysc_tif+8) + clg %r9,BASED(cleanup_table+24) # sysc_restore jl cleanup_sysc_tif -0: - clc 8(8,%r12),BASED(cleanup_table_sysc_restore) - jl 0f - clc 8(8,%r12),BASED(cleanup_table_sysc_restore+8) + clg %r9,BASED(cleanup_table+32) # sysc_done jl cleanup_sysc_restore -0: - clc 8(8,%r12),BASED(cleanup_table_io_tif) + clg %r9,BASED(cleanup_table+40) # io_tif jl 0f - clc 8(8,%r12),BASED(cleanup_table_io_tif+8) + clg %r9,BASED(cleanup_table+48) # io_restore jl cleanup_io_tif -0: - clc 8(8,%r12),BASED(cleanup_table_io_restore) - jl 0f - clc 8(8,%r12),BASED(cleanup_table_io_restore+8) + clg %r9,BASED(cleanup_table+56) # io_done jl cleanup_io_restore -0: - br %r14 +0: br %r14 + cleanup_system_call: - mvc __LC_RETURN_PSW(16),0(%r12) - clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+8) + # check if stpt has been executed + clg %r9,BASED(cleanup_system_call_insn) jh 0f - mvc __LC_SYNC_ENTER_TIMER(8),__LC_MCCK_ENTER_TIMER - cghi %r12,__LC_MCK_OLD_PSW - je 0f mvc __LC_SYNC_ENTER_TIMER(8),__LC_ASYNC_ENTER_TIMER -0: cghi %r12,__LC_MCK_OLD_PSW - la %r12,__LC_SAVE_AREA+80 + cghi %r11,__LC_SAVE_AREA_ASYNC je 0f - la %r12,__LC_SAVE_AREA+40 -0: clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+16) - jhe cleanup_vtime - clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn) + mvc __LC_SYNC_ENTER_TIMER(8),__LC_MCCK_ENTER_TIMER +0: # check if stmg has been executed + clg %r9,BASED(cleanup_system_call_insn+8) jh 0f - mvc __LC_SAVE_AREA(40),0(%r12) -0: lg %r15,__LC_KERNEL_STACK # problem state -> load ksp - aghi %r15,-SP_SIZE # make room for registers & psw - stg %r15,32(%r12) - stg %r11,0(%r12) - CREATE_STACK_FRAME __LC_SAVE_AREA - mvc 8(8,%r12),__LC_THREAD_INFO - lg %r12,__LC_THREAD_INFO - mvc SP_PSW(16,%r15),__LC_SVC_OLD_PSW - mvc SP_SVC_CODE(4,%r15),__LC_SVC_ILC - oi __TI_flags+7(%r12),_TIF_SYSCALL -cleanup_vtime: - clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+24) - jhe cleanup_stime - UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER -cleanup_stime: - clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+32) - jh cleanup_update - UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER -cleanup_update: + mvc __LC_SAVE_AREA_SYNC(64),0(%r11) +0: # check if base register setup + TIF bit load has been done + clg %r9,BASED(cleanup_system_call_insn+16) + jhe 0f + # set up saved registers r10 and r12 + stg %r10,16(%r11) # r10 last break + stg %r12,32(%r11) # r12 thread-info pointer +0: # check if the user time update has been done + clg %r9,BASED(cleanup_system_call_insn+24) + jh 0f + lg %r15,__LC_EXIT_TIMER + slg %r15,__LC_SYNC_ENTER_TIMER + alg %r15,__LC_USER_TIMER + stg %r15,__LC_USER_TIMER +0: # check if the system time update has been done + clg %r9,BASED(cleanup_system_call_insn+32) + jh 0f + lg %r15,__LC_LAST_UPDATE_TIMER + slg %r15,__LC_EXIT_TIMER + alg %r15,__LC_SYSTEM_TIMER + stg %r15,__LC_SYSTEM_TIMER +0: # update accounting time stamp mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER - srag %r12,%r11,23 - lg %r12,__LC_THREAD_INFO + # do LAST_BREAK + lg %r9,16(%r11) + srag %r9,%r9,23 jz 0f - stg %r11,__TI_last_break(%r12) -0: mvc __LC_RETURN_PSW+8(8),BASED(cleanup_table_system_call+8) - la %r12,__LC_RETURN_PSW + mvc __TI_last_break(8,%r12),16(%r11) +0: # set up saved register r11 + lg %r15,__LC_KERNEL_STACK + aghi %r15,-__PT_SIZE + stg %r15,24(%r11) # r11 pt_regs pointer + # fill pt_regs + mvc __PT_R8(64,%r15),__LC_SAVE_AREA_SYNC + stmg %r0,%r7,__PT_R0(%r15) + mvc __PT_PSW(16,%r15),__LC_SVC_OLD_PSW + mvc __PT_INT_CODE(4,%r15),__LC_SVC_ILC + # setup saved register r15 + aghi %r15,-STACK_FRAME_OVERHEAD + stg %r15,56(%r11) # r15 stack pointer + # set new psw address and exit + larl %r9,sysc_do_svc br %r14 cleanup_system_call_insn: - .quad sysc_saveall .quad system_call - .quad sysc_vtime - .quad sysc_stime - .quad sysc_update + .quad sysc_stmg + .quad sysc_per + .quad sysc_vtime+18 + .quad sysc_vtime+42 cleanup_sysc_tif: - mvc __LC_RETURN_PSW(8),0(%r12) - mvc __LC_RETURN_PSW+8(8),BASED(cleanup_table_sysc_tif) - la %r12,__LC_RETURN_PSW + larl %r9,sysc_tif br %r14 cleanup_sysc_restore: - clc 8(8,%r12),BASED(cleanup_sysc_restore_insn) - je 2f - clc 8(8,%r12),BASED(cleanup_sysc_restore_insn+8) - jhe 0f - mvc __LC_EXIT_TIMER(8),__LC_MCCK_ENTER_TIMER - cghi %r12,__LC_MCK_OLD_PSW + clg %r9,BASED(cleanup_sysc_restore_insn) je 0f - mvc __LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER -0: mvc __LC_RETURN_PSW(16),SP_PSW(%r15) - cghi %r12,__LC_MCK_OLD_PSW - la %r12,__LC_SAVE_AREA+80 - je 1f - la %r12,__LC_SAVE_AREA+40 -1: mvc 0(40,%r12),SP_R11(%r15) - lmg %r0,%r10,SP_R0(%r15) - lg %r15,SP_R15(%r15) -2: la %r12,__LC_RETURN_PSW + lg %r9,24(%r11) # get saved pointer to pt_regs + mvc __LC_RETURN_PSW(16),__PT_PSW(%r9) + mvc 0(64,%r11),__PT_R8(%r9) + lmg %r0,%r7,__PT_R0(%r9) +0: lmg %r8,%r9,__LC_RETURN_PSW br %r14 cleanup_sysc_restore_insn: .quad sysc_done - 4 - .quad sysc_done - 16 cleanup_io_tif: - mvc __LC_RETURN_PSW(8),0(%r12) - mvc __LC_RETURN_PSW+8(8),BASED(cleanup_table_io_tif) - la %r12,__LC_RETURN_PSW + larl %r9,io_tif br %r14 cleanup_io_restore: - clc 8(8,%r12),BASED(cleanup_io_restore_insn) - je 1f - clc 8(8,%r12),BASED(cleanup_io_restore_insn+8) - jhe 0f - mvc __LC_EXIT_TIMER(8),__LC_MCCK_ENTER_TIMER -0: mvc __LC_RETURN_PSW(16),SP_PSW(%r15) - mvc __LC_SAVE_AREA+80(40),SP_R11(%r15) - lmg %r0,%r10,SP_R0(%r15) - lg %r15,SP_R15(%r15) -1: la %r12,__LC_RETURN_PSW + clg %r9,BASED(cleanup_io_restore_insn) + je 0f + lg %r9,24(%r11) # get saved r11 pointer to pt_regs + mvc __LC_RETURN_PSW(16),__PT_PSW(%r9) + ni __LC_RETURN_PSW+1,0xfd # clear wait state bit + mvc 0(64,%r11),__PT_R8(%r9) + lmg %r0,%r7,__PT_R0(%r9) +0: lmg %r8,%r9,__LC_RETURN_PSW br %r14 cleanup_io_restore_insn: .quad io_done - 4 - .quad io_done - 16 /* * Integer constants */ - .align 4 + .align 8 .Lcritical_start: - .quad __critical_start -.Lcritical_end: - .quad __critical_end + .quad __critical_start +.Lcritical_length: + .quad __critical_end - __critical_start + #if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE) /* @@ -1054,6 +943,7 @@ ENTRY(sie64a) stmg %r6,%r14,__SF_GPRS(%r15) # save kernel registers stg %r2,__SF_EMPTY(%r15) # save control block pointer stg %r3,__SF_EMPTY+8(%r15) # save guest register save area + xc __SF_EMPTY+16(8,%r15),__SF_EMPTY+16(%r15) # host id == 0 lmg %r0,%r13,0(%r3) # load guest gprs 0-13 lg %r14,__LC_THREAD_INFO # pointer thread_info struct oi __TI_flags+6(%r14),_TIF_SIE>>8 @@ -1070,7 +960,7 @@ sie_gmap: SPP __SF_EMPTY(%r15) # set guest id sie 0(%r14) sie_done: - SPP __LC_CMF_HPP # set host id + SPP __SF_EMPTY+16(%r15) # set host id lg %r14,__LC_THREAD_INFO # pointer thread_info struct sie_exit: lctlg %c1,%c1,__LC_USER_ASCE # load primary asce @@ -1093,8 +983,10 @@ sie_fault: .align 8 .Lsie_loop: .quad sie_loop -.Lsie_done: - .quad sie_done +.Lsie_length: + .quad sie_done - sie_loop +.Lhost_id: + .quad 0 .section __ex_table,"a" .quad sie_loop,sie_fault diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index 900068d2bf92..c27a0727f930 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -329,8 +329,8 @@ iplstart: # # reset files in VM reader # - stidp __LC_SAVE_AREA # store cpuid - tm __LC_SAVE_AREA,0xff # running VM ? + stidp __LC_SAVE_AREA_SYNC # store cpuid + tm __LC_SAVE_AREA_SYNC,0xff# running VM ? bno .Lnoreset la %r2,.Lreset lhi %r3,26 diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c index 3cd0f25ab015..47b168fb29c4 100644 --- a/arch/s390/kernel/machine_kexec.c +++ b/arch/s390/kernel/machine_kexec.c @@ -208,6 +208,7 @@ void machine_kexec_cleanup(struct kimage *image) void arch_crash_save_vmcoreinfo(void) { VMCOREINFO_SYMBOL(lowcore_ptr); + VMCOREINFO_SYMBOL(high_memory); VMCOREINFO_LENGTH(lowcore_ptr, NR_CPUS); } diff --git a/arch/s390/kernel/mem_detect.c b/arch/s390/kernel/mem_detect.c index 19b4568f4cee..22d502e885ed 100644 --- a/arch/s390/kernel/mem_detect.c +++ b/arch/s390/kernel/mem_detect.c @@ -64,70 +64,82 @@ void detect_memory_layout(struct mem_chunk chunk[]) EXPORT_SYMBOL(detect_memory_layout); /* + * Move memory chunks array from index "from" to index "to" + */ +static void mem_chunk_move(struct mem_chunk chunk[], int to, int from) +{ + int cnt = MEMORY_CHUNKS - to; + + memmove(&chunk[to], &chunk[from], cnt * sizeof(struct mem_chunk)); +} + +/* + * Initialize memory chunk + */ +static void mem_chunk_init(struct mem_chunk *chunk, unsigned long addr, + unsigned long size, int type) +{ + chunk->type = type; + chunk->addr = addr; + chunk->size = size; +} + +/* * Create memory hole with given address, size, and type */ -void create_mem_hole(struct mem_chunk chunks[], unsigned long addr, +void create_mem_hole(struct mem_chunk chunk[], unsigned long addr, unsigned long size, int type) { - unsigned long start, end, new_size; - int i; + unsigned long lh_start, lh_end, lh_size, ch_start, ch_end, ch_size; + int i, ch_type; for (i = 0; i < MEMORY_CHUNKS; i++) { - if (chunks[i].size == 0) - continue; - if (addr + size < chunks[i].addr) - continue; - if (addr >= chunks[i].addr + chunks[i].size) + if (chunk[i].size == 0) continue; - start = max(addr, chunks[i].addr); - end = min(addr + size, chunks[i].addr + chunks[i].size); - new_size = end - start; - if (new_size == 0) - continue; - if (start == chunks[i].addr && - end == chunks[i].addr + chunks[i].size) { - /* Remove chunk */ - chunks[i].type = type; - } else if (start == chunks[i].addr) { - /* Make chunk smaller at start */ - if (i >= MEMORY_CHUNKS - 1) - panic("Unable to create memory hole"); - memmove(&chunks[i + 1], &chunks[i], - sizeof(struct mem_chunk) * - (MEMORY_CHUNKS - (i + 1))); - chunks[i + 1].addr = chunks[i].addr + new_size; - chunks[i + 1].size = chunks[i].size - new_size; - chunks[i].size = new_size; - chunks[i].type = type; - i += 1; - } else if (end == chunks[i].addr + chunks[i].size) { - /* Make chunk smaller at end */ - if (i >= MEMORY_CHUNKS - 1) - panic("Unable to create memory hole"); - memmove(&chunks[i + 1], &chunks[i], - sizeof(struct mem_chunk) * - (MEMORY_CHUNKS - (i + 1))); - chunks[i + 1].addr = start; - chunks[i + 1].size = new_size; - chunks[i + 1].type = type; - chunks[i].size -= new_size; + + /* Define chunk properties */ + ch_start = chunk[i].addr; + ch_size = chunk[i].size; + ch_end = ch_start + ch_size - 1; + ch_type = chunk[i].type; + + /* Is memory chunk hit by memory hole? */ + if (addr + size <= ch_start) + continue; /* No: memory hole in front of chunk */ + if (addr > ch_end) + continue; /* No: memory hole after chunk */ + + /* Yes: Define local hole properties */ + lh_start = max(addr, chunk[i].addr); + lh_end = min(addr + size - 1, ch_end); + lh_size = lh_end - lh_start + 1; + + if (lh_start == ch_start && lh_end == ch_end) { + /* Hole covers complete memory chunk */ + mem_chunk_init(&chunk[i], lh_start, lh_size, type); + } else if (lh_end == ch_end) { + /* Hole starts in memory chunk and convers chunk end */ + mem_chunk_move(chunk, i + 1, i); + mem_chunk_init(&chunk[i], ch_start, ch_size - lh_size, + ch_type); + mem_chunk_init(&chunk[i + 1], lh_start, lh_size, type); i += 1; + } else if (lh_start == ch_start) { + /* Hole ends in memory chunk */ + mem_chunk_move(chunk, i + 1, i); + mem_chunk_init(&chunk[i], lh_start, lh_size, type); + mem_chunk_init(&chunk[i + 1], lh_end + 1, + ch_size - lh_size, ch_type); + break; } else { - /* Create memory hole */ - if (i >= MEMORY_CHUNKS - 2) - panic("Unable to create memory hole"); - memmove(&chunks[i + 2], &chunks[i], - sizeof(struct mem_chunk) * - (MEMORY_CHUNKS - (i + 2))); - chunks[i + 1].addr = addr; - chunks[i + 1].size = size; - chunks[i + 1].type = type; - chunks[i + 2].addr = addr + size; - chunks[i + 2].size = - chunks[i].addr + chunks[i].size - (addr + size); - chunks[i + 2].type = chunks[i].type; - chunks[i].size = addr - chunks[i].addr; - i += 2; + /* Hole splits memory chunk */ + mem_chunk_move(chunk, i + 2, i); + mem_chunk_init(&chunk[i], ch_start, + lh_start - ch_start, ch_type); + mem_chunk_init(&chunk[i + 1], lh_start, lh_size, type); + mem_chunk_init(&chunk[i + 2], lh_end + 1, + ch_end - lh_end, ch_type); + break; } } } diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 9451b210a1b4..3201ae447990 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -91,10 +91,12 @@ static void default_idle(void) void cpu_idle(void) { for (;;) { - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); + rcu_idle_enter(); while (!need_resched()) default_idle(); - tick_nohz_restart_sched_tick(); + rcu_idle_exit(); + tick_nohz_idle_exit(); preempt_enable_no_resched(); schedule(); preempt_disable(); diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 450931a45b68..573bc29551ef 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -296,13 +296,6 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data) ((data & PSW_MASK_EA) && !(data & PSW_MASK_BA)))) /* Invalid psw mask. */ return -EINVAL; - if (addr == (addr_t) &dummy->regs.psw.addr) - /* - * The debugger changed the instruction address, - * reset system call restart, see signal.c:do_signal - */ - task_thread_info(child)->system_call = 0; - *(addr_t *)((addr_t) &task_pt_regs(child)->psw + addr) = data; } else if (addr < (addr_t) (&dummy->regs.orig_gpr2)) { @@ -614,11 +607,6 @@ static int __poke_user_compat(struct task_struct *child, /* Transfer 31 bit amode bit to psw mask. */ regs->psw.mask = (regs->psw.mask & ~PSW_MASK_BA) | (__u64)(tmp & PSW32_ADDR_AMODE); - /* - * The debugger changed the instruction address, - * reset system call restart, see signal.c:do_signal - */ - task_thread_info(child)->system_call = 0; } else { /* gpr 0-15 */ *(__u32*)((addr_t) ®s->psw + addr*2 + 4) = tmp; @@ -905,6 +893,14 @@ static int s390_last_break_get(struct task_struct *target, return 0; } +static int s390_last_break_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + return 0; +} + #endif static int s390_system_call_get(struct task_struct *target, @@ -951,6 +947,7 @@ static const struct user_regset s390_regsets[] = { .size = sizeof(long), .align = sizeof(long), .get = s390_last_break_get, + .set = s390_last_break_set, }, #endif [REGSET_SYSTEM_CALL] = { @@ -1116,6 +1113,14 @@ static int s390_compat_last_break_get(struct task_struct *target, return 0; } +static int s390_compat_last_break_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + return 0; +} + static const struct user_regset s390_compat_regsets[] = { [REGSET_GENERAL] = { .core_note_type = NT_PRSTATUS, @@ -1139,6 +1144,7 @@ static const struct user_regset s390_compat_regsets[] = { .size = sizeof(long), .align = sizeof(long), .get = s390_compat_last_break_get, + .set = s390_compat_last_break_set, }, [REGSET_SYSTEM_CALL] = { .core_note_type = NT_S390_SYSTEM_CALL, diff --git a/arch/s390/kernel/reipl64.S b/arch/s390/kernel/reipl64.S index 732a793ec53a..36b32658fb24 100644 --- a/arch/s390/kernel/reipl64.S +++ b/arch/s390/kernel/reipl64.S @@ -17,11 +17,11 @@ # ENTRY(store_status) /* Save register one and load save area base */ - stg %r1,__LC_SAVE_AREA+120(%r0) + stg %r1,__LC_SAVE_AREA_RESTART lghi %r1,SAVE_AREA_BASE /* General purpose registers */ stmg %r0,%r15,__LC_GPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1) - lg %r2,__LC_SAVE_AREA+120(%r0) + lg %r2,__LC_SAVE_AREA_RESTART stg %r2,__LC_GPREGS_SAVE_AREA-SAVE_AREA_BASE+8(%r1) /* Control registers */ stctg %c0,%c15,__LC_CREGS_SAVE_AREA-SAVE_AREA_BASE(%r1) diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index e58a462949b1..354de0763eff 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -21,6 +21,7 @@ #include <linux/module.h> #include <linux/sched.h> #include <linux/kernel.h> +#include <linux/memblock.h> #include <linux/mm.h> #include <linux/stddef.h> #include <linux/unistd.h> @@ -94,6 +95,15 @@ struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS]; int __initdata memory_end_set; unsigned long __initdata memory_end; +unsigned long VMALLOC_START; +EXPORT_SYMBOL(VMALLOC_START); + +unsigned long VMALLOC_END; +EXPORT_SYMBOL(VMALLOC_END); + +struct page *vmemmap; +EXPORT_SYMBOL(vmemmap); + /* An array with a pointer to the lowcore of every CPU. */ struct _lowcore *lowcore_ptr[NR_CPUS]; EXPORT_SYMBOL(lowcore_ptr); @@ -277,6 +287,15 @@ static int __init early_parse_mem(char *p) } early_param("mem", early_parse_mem); +static int __init parse_vmalloc(char *arg) +{ + if (!arg) + return -EINVAL; + VMALLOC_END = (memparse(arg, &arg) + PAGE_SIZE - 1) & PAGE_MASK; + return 0; +} +early_param("vmalloc", parse_vmalloc); + unsigned int user_mode = HOME_SPACE_MODE; EXPORT_SYMBOL_GPL(user_mode); @@ -382,7 +401,6 @@ setup_lowcore(void) __ctl_set_bit(14, 29); } #else - lc->cmf_hpp = -1ULL; lc->vdso_per_cpu_data = (unsigned long) &lc->paste[0]; #endif lc->sync_enter_timer = S390_lowcore.sync_enter_timer; @@ -478,8 +496,7 @@ EXPORT_SYMBOL_GPL(real_memory_size); static void __init setup_memory_end(void) { - unsigned long memory_size; - unsigned long max_mem; + unsigned long vmax, vmalloc_size, tmp; int i; @@ -489,12 +506,9 @@ static void __init setup_memory_end(void) memory_end_set = 1; } #endif - memory_size = 0; + real_memory_size = 0; memory_end &= PAGE_MASK; - max_mem = memory_end ? min(VMEM_MAX_PHYS, memory_end) : VMEM_MAX_PHYS; - memory_end = min(max_mem, memory_end); - /* * Make sure all chunks are MAX_ORDER aligned so we don't need the * extra checks that HOLES_IN_ZONE would require. @@ -514,23 +528,48 @@ static void __init setup_memory_end(void) chunk->addr = start; chunk->size = end - start; } + real_memory_size = max(real_memory_size, + chunk->addr + chunk->size); } + /* Choose kernel address space layout: 2, 3, or 4 levels. */ +#ifdef CONFIG_64BIT + vmalloc_size = VMALLOC_END ?: 128UL << 30; + tmp = (memory_end ?: real_memory_size) / PAGE_SIZE; + tmp = tmp * (sizeof(struct page) + PAGE_SIZE) + vmalloc_size; + if (tmp <= (1UL << 42)) + vmax = 1UL << 42; /* 3-level kernel page table */ + else + vmax = 1UL << 53; /* 4-level kernel page table */ +#else + vmalloc_size = VMALLOC_END ?: 96UL << 20; + vmax = 1UL << 31; /* 2-level kernel page table */ +#endif + /* vmalloc area is at the end of the kernel address space. */ + VMALLOC_END = vmax; + VMALLOC_START = vmax - vmalloc_size; + + /* Split remaining virtual space between 1:1 mapping & vmemmap array */ + tmp = VMALLOC_START / (PAGE_SIZE + sizeof(struct page)); + tmp = VMALLOC_START - tmp * sizeof(struct page); + tmp &= ~((vmax >> 11) - 1); /* align to page table level */ + tmp = min(tmp, 1UL << MAX_PHYSMEM_BITS); + vmemmap = (struct page *) tmp; + + /* Take care that memory_end is set and <= vmemmap */ + memory_end = min(memory_end ?: real_memory_size, tmp); + + /* Fixup memory chunk array to fit into 0..memory_end */ for (i = 0; i < MEMORY_CHUNKS; i++) { struct mem_chunk *chunk = &memory_chunk[i]; - real_memory_size = max(real_memory_size, - chunk->addr + chunk->size); - if (chunk->addr >= max_mem) { + if (chunk->addr >= memory_end) { memset(chunk, 0, sizeof(*chunk)); continue; } - if (chunk->addr + chunk->size > max_mem) - chunk->size = max_mem - chunk->addr; - memory_size = max(memory_size, chunk->addr + chunk->size); + if (chunk->addr + chunk->size > memory_end) + chunk->size = memory_end - chunk->addr; } - if (!memory_end) - memory_end = memory_size; } void *restart_stack __attribute__((__section__(".data"))); @@ -579,7 +618,7 @@ static unsigned long __init find_crash_base(unsigned long crash_size, *msg = "first memory chunk must be at least crashkernel size"; return 0; } - if (is_kdump_kernel() && (crash_size == OLDMEM_SIZE)) + if (OLDMEM_BASE && crash_size == OLDMEM_SIZE) return OLDMEM_BASE; for (i = MEMORY_CHUNKS - 1; i >= 0; i--) { @@ -654,7 +693,6 @@ static int __init verify_crash_base(unsigned long crash_base, static void __init reserve_kdump_bootmem(unsigned long addr, unsigned long size, int type) { - create_mem_hole(memory_chunk, addr, size, type); } @@ -820,7 +858,8 @@ setup_memory(void) end_chunk = min(end_chunk, end_pfn); if (start_chunk >= end_chunk) continue; - add_active_range(0, start_chunk, end_chunk); + memblock_add_node(PFN_PHYS(start_chunk), + PFN_PHYS(end_chunk - start_chunk), 0); pfn = max(start_chunk, start_pfn); for (; pfn < end_chunk; pfn++) page_set_storage_key(PFN_PHYS(pfn), diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index 05a85bc14c98..a8ba840294ff 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -302,9 +302,13 @@ static int setup_frame(int sig, struct k_sigaction *ka, /* We forgot to include these in the sigcontext. To avoid breaking binary compatibility, they are passed as args. */ - regs->gprs[4] = current->thread.trap_no; - regs->gprs[5] = current->thread.prot_addr; - regs->gprs[6] = task_thread_info(current)->last_break; + if (sig == SIGSEGV || sig == SIGBUS || sig == SIGILL || + sig == SIGTRAP || sig == SIGFPE) { + /* set extra registers only for synchronous signals */ + regs->gprs[4] = regs->int_code & 127; + regs->gprs[5] = regs->int_parm_long; + regs->gprs[6] = task_thread_info(current)->last_break; + } /* Place signal number on stack to allow backtrace from handler. */ if (__put_user(regs->gprs[2], (int __user *) &frame->signo)) @@ -434,13 +438,13 @@ void do_signal(struct pt_regs *regs) * call information. */ current_thread_info()->system_call = - test_thread_flag(TIF_SYSCALL) ? regs->svc_code : 0; + test_thread_flag(TIF_SYSCALL) ? regs->int_code : 0; signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { /* Whee! Actually deliver the signal. */ if (current_thread_info()->system_call) { - regs->svc_code = current_thread_info()->system_call; + regs->int_code = current_thread_info()->system_call; /* Check for system call restarting. */ switch (regs->gprs[2]) { case -ERESTART_RESTARTBLOCK: @@ -457,12 +461,12 @@ void do_signal(struct pt_regs *regs) regs->gprs[2] = regs->orig_gpr2; regs->psw.addr = __rewind_psw(regs->psw, - regs->svc_code >> 16); + regs->int_code >> 16); break; } - /* No longer in a system call */ - clear_thread_flag(TIF_SYSCALL); } + /* No longer in a system call */ + clear_thread_flag(TIF_SYSCALL); if ((is_compat_task() ? handle_signal32(signr, &ka, &info, oldset, regs) : @@ -486,12 +490,13 @@ void do_signal(struct pt_regs *regs) } /* No handlers present - check for system call restart */ + clear_thread_flag(TIF_SYSCALL); if (current_thread_info()->system_call) { - regs->svc_code = current_thread_info()->system_call; + regs->int_code = current_thread_info()->system_call; switch (regs->gprs[2]) { case -ERESTART_RESTARTBLOCK: /* Restart with sys_restart_syscall */ - regs->svc_code = __NR_restart_syscall; + regs->int_code = __NR_restart_syscall; /* fallthrough */ case -ERESTARTNOHAND: case -ERESTARTSYS: @@ -500,9 +505,6 @@ void do_signal(struct pt_regs *regs) regs->gprs[2] = regs->orig_gpr2; set_thread_flag(TIF_SYSCALL); break; - default: - clear_thread_flag(TIF_SYSCALL); - break; } } diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 3ea872890da2..2398ce6b15ae 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -69,9 +69,7 @@ enum s390_cpu_state { }; DEFINE_MUTEX(smp_cpu_state_mutex); -int smp_cpu_polarization[NR_CPUS]; static int smp_cpu_state[NR_CPUS]; -static int cpu_management; static DEFINE_PER_CPU(struct cpu, cpu_devices); @@ -149,29 +147,59 @@ void smp_switch_to_ipl_cpu(void (*func)(void *), void *data) sp -= sizeof(struct pt_regs); regs = (struct pt_regs *) sp; memcpy(®s->gprs, ¤t_lc->gpregs_save_area, sizeof(regs->gprs)); - regs->psw = lc->psw_save_area; + regs->psw = current_lc->psw_save_area; sp -= STACK_FRAME_OVERHEAD; sf = (struct stack_frame *) sp; - sf->back_chain = regs->gprs[15]; + sf->back_chain = 0; smp_switch_to_cpu(func, data, sp, stap(), __cpu_logical_map[0]); } +static void smp_stop_cpu(void) +{ + while (sigp(smp_processor_id(), sigp_stop) == sigp_busy) + cpu_relax(); +} + void smp_send_stop(void) { - int cpu, rc; + cpumask_t cpumask; + int cpu; + u64 end; /* Disable all interrupts/machine checks */ __load_psw_mask(psw_kernel_bits | PSW_MASK_DAT); trace_hardirqs_off(); - /* stop all processors */ - for_each_online_cpu(cpu) { - if (cpu == smp_processor_id()) - continue; - do { - rc = sigp(cpu, sigp_stop); - } while (rc == sigp_busy); + cpumask_copy(&cpumask, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &cpumask); + + if (oops_in_progress) { + /* + * Give the other cpus the opportunity to complete + * outstanding interrupts before stopping them. + */ + end = get_clock() + (1000000UL << 12); + for_each_cpu(cpu, &cpumask) { + set_bit(ec_stop_cpu, (unsigned long *) + &lowcore_ptr[cpu]->ext_call_fast); + while (sigp(cpu, sigp_emergency_signal) == sigp_busy && + get_clock() < end) + cpu_relax(); + } + while (get_clock() < end) { + for_each_cpu(cpu, &cpumask) + if (cpu_stopped(cpu)) + cpumask_clear_cpu(cpu, &cpumask); + if (cpumask_empty(&cpumask)) + break; + cpu_relax(); + } + } + /* stop all processors */ + for_each_cpu(cpu, &cpumask) { + while (sigp(cpu, sigp_stop) == sigp_busy) + cpu_relax(); while (!cpu_stopped(cpu)) cpu_relax(); } @@ -187,7 +215,7 @@ static void do_ext_call_interrupt(unsigned int ext_int_code, { unsigned long bits; - if (ext_int_code == 0x1202) + if ((ext_int_code & 0xffff) == 0x1202) kstat_cpu(smp_processor_id()).irqs[EXTINT_EXC]++; else kstat_cpu(smp_processor_id()).irqs[EXTINT_EMS]++; @@ -196,6 +224,9 @@ static void do_ext_call_interrupt(unsigned int ext_int_code, */ bits = xchg(&S390_lowcore.ext_call_fast, 0); + if (test_bit(ec_stop_cpu, &bits)) + smp_stop_cpu(); + if (test_bit(ec_schedule, &bits)) scheduler_ipi(); @@ -204,6 +235,7 @@ static void do_ext_call_interrupt(unsigned int ext_int_code, if (test_bit(ec_call_function_single, &bits)) generic_smp_call_function_single_interrupt(); + } /* @@ -369,7 +401,7 @@ static int smp_rescan_cpus_sigp(cpumask_t avail) if (cpu_known(cpu_id)) continue; __cpu_logical_map[logical_cpu] = cpu_id; - smp_cpu_polarization[logical_cpu] = POLARIZATION_UNKNWN; + cpu_set_polarization(logical_cpu, POLARIZATION_UNKNOWN); if (!cpu_stopped(logical_cpu)) continue; set_cpu_present(logical_cpu, true); @@ -403,7 +435,7 @@ static int smp_rescan_cpus_sclp(cpumask_t avail) if (cpu_known(cpu_id)) continue; __cpu_logical_map[logical_cpu] = cpu_id; - smp_cpu_polarization[logical_cpu] = POLARIZATION_UNKNWN; + cpu_set_polarization(logical_cpu, POLARIZATION_UNKNOWN); set_cpu_present(logical_cpu, true); if (cpu >= info->configured) smp_cpu_state[logical_cpu] = CPU_STATE_STANDBY; @@ -656,7 +688,7 @@ int __cpuinit __cpu_up(unsigned int cpu) - sizeof(struct stack_frame)); memset(sf, 0, sizeof(struct stack_frame)); sf->gprs[9] = (unsigned long) sf; - cpu_lowcore->save_area[15] = (unsigned long) sf; + cpu_lowcore->gpregs_save_area[15] = (unsigned long) sf; __ctl_store(cpu_lowcore->cregs_save_area, 0, 15); atomic_inc(&init_mm.context.attach_count); asm volatile( @@ -806,7 +838,7 @@ void __init smp_prepare_boot_cpu(void) S390_lowcore.percpu_offset = __per_cpu_offset[0]; current_set[0] = current; smp_cpu_state[0] = CPU_STATE_CONFIGURED; - smp_cpu_polarization[0] = POLARIZATION_UNKNWN; + cpu_set_polarization(0, POLARIZATION_UNKNOWN); } void __init smp_cpus_done(unsigned int max_cpus) @@ -831,8 +863,8 @@ int setup_profiling_timer(unsigned int multiplier) } #ifdef CONFIG_HOTPLUG_CPU -static ssize_t cpu_configure_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t cpu_configure_show(struct device *dev, + struct device_attribute *attr, char *buf) { ssize_t count; @@ -842,8 +874,8 @@ static ssize_t cpu_configure_show(struct sys_device *dev, return count; } -static ssize_t cpu_configure_store(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t cpu_configure_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { int cpu = dev->id; @@ -868,7 +900,8 @@ static ssize_t cpu_configure_store(struct sys_device *dev, rc = sclp_cpu_deconfigure(__cpu_logical_map[cpu]); if (!rc) { smp_cpu_state[cpu] = CPU_STATE_STANDBY; - smp_cpu_polarization[cpu] = POLARIZATION_UNKNWN; + cpu_set_polarization(cpu, POLARIZATION_UNKNOWN); + topology_expect_change(); } } break; @@ -877,7 +910,8 @@ static ssize_t cpu_configure_store(struct sys_device *dev, rc = sclp_cpu_configure(__cpu_logical_map[cpu]); if (!rc) { smp_cpu_state[cpu] = CPU_STATE_CONFIGURED; - smp_cpu_polarization[cpu] = POLARIZATION_UNKNWN; + cpu_set_polarization(cpu, POLARIZATION_UNKNOWN); + topology_expect_change(); } } break; @@ -889,52 +923,21 @@ out: put_online_cpus(); return rc ? rc : count; } -static SYSDEV_ATTR(configure, 0644, cpu_configure_show, cpu_configure_store); +static DEVICE_ATTR(configure, 0644, cpu_configure_show, cpu_configure_store); #endif /* CONFIG_HOTPLUG_CPU */ -static ssize_t cpu_polarization_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) -{ - int cpu = dev->id; - ssize_t count; - - mutex_lock(&smp_cpu_state_mutex); - switch (smp_cpu_polarization[cpu]) { - case POLARIZATION_HRZ: - count = sprintf(buf, "horizontal\n"); - break; - case POLARIZATION_VL: - count = sprintf(buf, "vertical:low\n"); - break; - case POLARIZATION_VM: - count = sprintf(buf, "vertical:medium\n"); - break; - case POLARIZATION_VH: - count = sprintf(buf, "vertical:high\n"); - break; - default: - count = sprintf(buf, "unknown\n"); - break; - } - mutex_unlock(&smp_cpu_state_mutex); - return count; -} -static SYSDEV_ATTR(polarization, 0444, cpu_polarization_show, NULL); - -static ssize_t show_cpu_address(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t show_cpu_address(struct device *dev, + struct device_attribute *attr, char *buf) { return sprintf(buf, "%d\n", __cpu_logical_map[dev->id]); } -static SYSDEV_ATTR(address, 0444, show_cpu_address, NULL); - +static DEVICE_ATTR(address, 0444, show_cpu_address, NULL); static struct attribute *cpu_common_attrs[] = { #ifdef CONFIG_HOTPLUG_CPU - &attr_configure.attr, + &dev_attr_configure.attr, #endif - &attr_address.attr, - &attr_polarization.attr, + &dev_attr_address.attr, NULL, }; @@ -942,8 +945,8 @@ static struct attribute_group cpu_common_attr_group = { .attrs = cpu_common_attrs, }; -static ssize_t show_capability(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t show_capability(struct device *dev, + struct device_attribute *attr, char *buf) { unsigned int capability; int rc; @@ -953,10 +956,10 @@ static ssize_t show_capability(struct sys_device *dev, return rc; return sprintf(buf, "%u\n", capability); } -static SYSDEV_ATTR(capability, 0444, show_capability, NULL); +static DEVICE_ATTR(capability, 0444, show_capability, NULL); -static ssize_t show_idle_count(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t show_idle_count(struct device *dev, + struct device_attribute *attr, char *buf) { struct s390_idle_data *idle; unsigned long long idle_count; @@ -976,10 +979,10 @@ repeat: goto repeat; return sprintf(buf, "%llu\n", idle_count); } -static SYSDEV_ATTR(idle_count, 0444, show_idle_count, NULL); +static DEVICE_ATTR(idle_count, 0444, show_idle_count, NULL); -static ssize_t show_idle_time(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t show_idle_time(struct device *dev, + struct device_attribute *attr, char *buf) { struct s390_idle_data *idle; unsigned long long now, idle_time, idle_enter; @@ -1001,12 +1004,12 @@ repeat: goto repeat; return sprintf(buf, "%llu\n", idle_time >> 12); } -static SYSDEV_ATTR(idle_time_us, 0444, show_idle_time, NULL); +static DEVICE_ATTR(idle_time_us, 0444, show_idle_time, NULL); static struct attribute *cpu_online_attrs[] = { - &attr_capability.attr, - &attr_idle_count.attr, - &attr_idle_time_us.attr, + &dev_attr_capability.attr, + &dev_attr_idle_count.attr, + &dev_attr_idle_time_us.attr, NULL, }; @@ -1019,7 +1022,7 @@ static int __cpuinit smp_cpu_notify(struct notifier_block *self, { unsigned int cpu = (unsigned int)(long)hcpu; struct cpu *c = &per_cpu(cpu_devices, cpu); - struct sys_device *s = &c->sysdev; + struct device *s = &c->dev; struct s390_idle_data *idle; int err = 0; @@ -1045,7 +1048,7 @@ static struct notifier_block __cpuinitdata smp_cpu_nb = { static int __devinit smp_add_present_cpu(int cpu) { struct cpu *c = &per_cpu(cpu_devices, cpu); - struct sys_device *s = &c->sysdev; + struct device *s = &c->dev; int rc; c->hotpluggable = 1; @@ -1055,11 +1058,20 @@ static int __devinit smp_add_present_cpu(int cpu) rc = sysfs_create_group(&s->kobj, &cpu_common_attr_group); if (rc) goto out_cpu; - if (!cpu_online(cpu)) - goto out; - rc = sysfs_create_group(&s->kobj, &cpu_online_attr_group); - if (!rc) - return 0; + if (cpu_online(cpu)) { + rc = sysfs_create_group(&s->kobj, &cpu_online_attr_group); + if (rc) + goto out_online; + } + rc = topology_cpu_init(c); + if (rc) + goto out_topology; + return 0; + +out_topology: + if (cpu_online(cpu)) + sysfs_remove_group(&s->kobj, &cpu_online_attr_group); +out_online: sysfs_remove_group(&s->kobj, &cpu_common_attr_group); out_cpu: #ifdef CONFIG_HOTPLUG_CPU @@ -1098,8 +1110,8 @@ out: return rc; } -static ssize_t __ref rescan_store(struct sysdev_class *class, - struct sysdev_class_attribute *attr, +static ssize_t __ref rescan_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { @@ -1108,64 +1120,19 @@ static ssize_t __ref rescan_store(struct sysdev_class *class, rc = smp_rescan_cpus(); return rc ? rc : count; } -static SYSDEV_CLASS_ATTR(rescan, 0200, NULL, rescan_store); +static DEVICE_ATTR(rescan, 0200, NULL, rescan_store); #endif /* CONFIG_HOTPLUG_CPU */ -static ssize_t dispatching_show(struct sysdev_class *class, - struct sysdev_class_attribute *attr, - char *buf) -{ - ssize_t count; - - mutex_lock(&smp_cpu_state_mutex); - count = sprintf(buf, "%d\n", cpu_management); - mutex_unlock(&smp_cpu_state_mutex); - return count; -} - -static ssize_t dispatching_store(struct sysdev_class *dev, - struct sysdev_class_attribute *attr, - const char *buf, - size_t count) -{ - int val, rc; - char delim; - - if (sscanf(buf, "%d %c", &val, &delim) != 1) - return -EINVAL; - if (val != 0 && val != 1) - return -EINVAL; - rc = 0; - get_online_cpus(); - mutex_lock(&smp_cpu_state_mutex); - if (cpu_management == val) - goto out; - rc = topology_set_cpu_management(val); - if (!rc) - cpu_management = val; -out: - mutex_unlock(&smp_cpu_state_mutex); - put_online_cpus(); - return rc ? rc : count; -} -static SYSDEV_CLASS_ATTR(dispatching, 0644, dispatching_show, - dispatching_store); - -static int __init topology_init(void) +static int __init s390_smp_init(void) { - int cpu; - int rc; + int cpu, rc; register_cpu_notifier(&smp_cpu_nb); - #ifdef CONFIG_HOTPLUG_CPU - rc = sysdev_class_create_file(&cpu_sysdev_class, &attr_rescan); + rc = device_create_file(cpu_subsys.dev_root, &dev_attr_rescan); if (rc) return rc; #endif - rc = sysdev_class_create_file(&cpu_sysdev_class, &attr_dispatching); - if (rc) - return rc; for_each_present_cpu(cpu) { rc = smp_add_present_cpu(cpu); if (rc) @@ -1173,4 +1140,4 @@ static int __init topology_init(void) } return 0; } -subsys_initcall(topology_init); +subsys_initcall(s390_smp_init); diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c index 476081440df9..78ea1948ff51 100644 --- a/arch/s390/kernel/sys_s390.c +++ b/arch/s390/kernel/sys_s390.c @@ -60,74 +60,22 @@ out: } /* - * sys_ipc() is the de-multiplexer for the SysV IPC calls.. - * - * This is really horribly ugly. + * sys_ipc() is the de-multiplexer for the SysV IPC calls. */ SYSCALL_DEFINE5(s390_ipc, uint, call, int, first, unsigned long, second, unsigned long, third, void __user *, ptr) { - struct ipc_kludge tmp; - int ret; - - switch (call) { - case SEMOP: - return sys_semtimedop(first, (struct sembuf __user *)ptr, - (unsigned)second, NULL); - case SEMTIMEDOP: - return sys_semtimedop(first, (struct sembuf __user *)ptr, - (unsigned)second, - (const struct timespec __user *) third); - case SEMGET: - return sys_semget(first, (int)second, third); - case SEMCTL: { - union semun fourth; - if (!ptr) - return -EINVAL; - if (get_user(fourth.__pad, (void __user * __user *) ptr)) - return -EFAULT; - return sys_semctl(first, (int)second, third, fourth); - } - case MSGSND: - return sys_msgsnd (first, (struct msgbuf __user *) ptr, - (size_t)second, third); - break; - case MSGRCV: - if (!ptr) - return -EINVAL; - if (copy_from_user (&tmp, (struct ipc_kludge __user *) ptr, - sizeof (struct ipc_kludge))) - return -EFAULT; - return sys_msgrcv (first, tmp.msgp, - (size_t)second, tmp.msgtyp, third); - case MSGGET: - return sys_msgget((key_t)first, (int)second); - case MSGCTL: - return sys_msgctl(first, (int)second, - (struct msqid_ds __user *)ptr); - - case SHMAT: { - ulong raddr; - ret = do_shmat(first, (char __user *)ptr, - (int)second, &raddr); - if (ret) - return ret; - return put_user (raddr, (ulong __user *) third); - break; - } - case SHMDT: - return sys_shmdt ((char __user *)ptr); - case SHMGET: - return sys_shmget(first, (size_t)second, third); - case SHMCTL: - return sys_shmctl(first, (int)second, - (struct shmid_ds __user *) ptr); - default: - return -ENOSYS; - - } - - return -EINVAL; + if (call >> 16) + return -EINVAL; + /* The s390 sys_ipc variant has only five parameters instead of six + * like the generic variant. The only difference is the handling of + * the SEMTIMEDOP subcall where on s390 the third parameter is used + * as a pointer to a struct timespec where the generic variant uses + * the fifth parameter. + * Therefore we can call the generic variant by simply passing the + * third parameter also as fifth parameter. + */ + return sys_ipc(call, first, second, third, ptr, third); } #ifdef CONFIG_64BIT diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index ebbfab3c6e5a..fa02f443f5f6 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -27,7 +27,7 @@ #include <linux/cpu.h> #include <linux/stop_machine.h> #include <linux/time.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/smp.h> @@ -1116,34 +1116,35 @@ out_unlock: /* * Sysfs interface functions */ -static struct sysdev_class etr_sysclass = { - .name = "etr", +static struct bus_type etr_subsys = { + .name = "etr", + .dev_name = "etr", }; -static struct sys_device etr_port0_dev = { +static struct device etr_port0_dev = { .id = 0, - .cls = &etr_sysclass, + .bus = &etr_subsys, }; -static struct sys_device etr_port1_dev = { +static struct device etr_port1_dev = { .id = 1, - .cls = &etr_sysclass, + .bus = &etr_subsys, }; /* - * ETR class attributes + * ETR subsys attributes */ -static ssize_t etr_stepping_port_show(struct sysdev_class *class, - struct sysdev_class_attribute *attr, +static ssize_t etr_stepping_port_show(struct device *dev, + struct device_attribute *attr, char *buf) { return sprintf(buf, "%i\n", etr_port0.esw.p); } -static SYSDEV_CLASS_ATTR(stepping_port, 0400, etr_stepping_port_show, NULL); +static DEVICE_ATTR(stepping_port, 0400, etr_stepping_port_show, NULL); -static ssize_t etr_stepping_mode_show(struct sysdev_class *class, - struct sysdev_class_attribute *attr, +static ssize_t etr_stepping_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) { char *mode_str; @@ -1157,12 +1158,12 @@ static ssize_t etr_stepping_mode_show(struct sysdev_class *class, return sprintf(buf, "%s\n", mode_str); } -static SYSDEV_CLASS_ATTR(stepping_mode, 0400, etr_stepping_mode_show, NULL); +static DEVICE_ATTR(stepping_mode, 0400, etr_stepping_mode_show, NULL); /* * ETR port attributes */ -static inline struct etr_aib *etr_aib_from_dev(struct sys_device *dev) +static inline struct etr_aib *etr_aib_from_dev(struct device *dev) { if (dev == &etr_port0_dev) return etr_port0_online ? &etr_port0 : NULL; @@ -1170,8 +1171,8 @@ static inline struct etr_aib *etr_aib_from_dev(struct sys_device *dev) return etr_port1_online ? &etr_port1 : NULL; } -static ssize_t etr_online_show(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t etr_online_show(struct device *dev, + struct device_attribute *attr, char *buf) { unsigned int online; @@ -1180,8 +1181,8 @@ static ssize_t etr_online_show(struct sys_device *dev, return sprintf(buf, "%i\n", online); } -static ssize_t etr_online_store(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t etr_online_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { unsigned int value; @@ -1218,20 +1219,20 @@ out: return count; } -static SYSDEV_ATTR(online, 0600, etr_online_show, etr_online_store); +static DEVICE_ATTR(online, 0600, etr_online_show, etr_online_store); -static ssize_t etr_stepping_control_show(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t etr_stepping_control_show(struct device *dev, + struct device_attribute *attr, char *buf) { return sprintf(buf, "%i\n", (dev == &etr_port0_dev) ? etr_eacr.e0 : etr_eacr.e1); } -static SYSDEV_ATTR(stepping_control, 0400, etr_stepping_control_show, NULL); +static DEVICE_ATTR(stepping_control, 0400, etr_stepping_control_show, NULL); -static ssize_t etr_mode_code_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t etr_mode_code_show(struct device *dev, + struct device_attribute *attr, char *buf) { if (!etr_port0_online && !etr_port1_online) /* Status word is not uptodate if both ports are offline. */ @@ -1240,10 +1241,10 @@ static ssize_t etr_mode_code_show(struct sys_device *dev, etr_port0.esw.psc0 : etr_port0.esw.psc1); } -static SYSDEV_ATTR(state_code, 0400, etr_mode_code_show, NULL); +static DEVICE_ATTR(state_code, 0400, etr_mode_code_show, NULL); -static ssize_t etr_untuned_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t etr_untuned_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct etr_aib *aib = etr_aib_from_dev(dev); @@ -1252,10 +1253,10 @@ static ssize_t etr_untuned_show(struct sys_device *dev, return sprintf(buf, "%i\n", aib->edf1.u); } -static SYSDEV_ATTR(untuned, 0400, etr_untuned_show, NULL); +static DEVICE_ATTR(untuned, 0400, etr_untuned_show, NULL); -static ssize_t etr_network_id_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t etr_network_id_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct etr_aib *aib = etr_aib_from_dev(dev); @@ -1264,10 +1265,10 @@ static ssize_t etr_network_id_show(struct sys_device *dev, return sprintf(buf, "%i\n", aib->edf1.net_id); } -static SYSDEV_ATTR(network, 0400, etr_network_id_show, NULL); +static DEVICE_ATTR(network, 0400, etr_network_id_show, NULL); -static ssize_t etr_id_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t etr_id_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct etr_aib *aib = etr_aib_from_dev(dev); @@ -1276,10 +1277,10 @@ static ssize_t etr_id_show(struct sys_device *dev, return sprintf(buf, "%i\n", aib->edf1.etr_id); } -static SYSDEV_ATTR(id, 0400, etr_id_show, NULL); +static DEVICE_ATTR(id, 0400, etr_id_show, NULL); -static ssize_t etr_port_number_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t etr_port_number_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct etr_aib *aib = etr_aib_from_dev(dev); @@ -1288,10 +1289,10 @@ static ssize_t etr_port_number_show(struct sys_device *dev, return sprintf(buf, "%i\n", aib->edf1.etr_pn); } -static SYSDEV_ATTR(port, 0400, etr_port_number_show, NULL); +static DEVICE_ATTR(port, 0400, etr_port_number_show, NULL); -static ssize_t etr_coupled_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t etr_coupled_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct etr_aib *aib = etr_aib_from_dev(dev); @@ -1300,10 +1301,10 @@ static ssize_t etr_coupled_show(struct sys_device *dev, return sprintf(buf, "%i\n", aib->edf3.c); } -static SYSDEV_ATTR(coupled, 0400, etr_coupled_show, NULL); +static DEVICE_ATTR(coupled, 0400, etr_coupled_show, NULL); -static ssize_t etr_local_time_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t etr_local_time_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct etr_aib *aib = etr_aib_from_dev(dev); @@ -1312,10 +1313,10 @@ static ssize_t etr_local_time_show(struct sys_device *dev, return sprintf(buf, "%i\n", aib->edf3.blto); } -static SYSDEV_ATTR(local_time, 0400, etr_local_time_show, NULL); +static DEVICE_ATTR(local_time, 0400, etr_local_time_show, NULL); -static ssize_t etr_utc_offset_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t etr_utc_offset_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct etr_aib *aib = etr_aib_from_dev(dev); @@ -1324,64 +1325,64 @@ static ssize_t etr_utc_offset_show(struct sys_device *dev, return sprintf(buf, "%i\n", aib->edf3.buo); } -static SYSDEV_ATTR(utc_offset, 0400, etr_utc_offset_show, NULL); +static DEVICE_ATTR(utc_offset, 0400, etr_utc_offset_show, NULL); -static struct sysdev_attribute *etr_port_attributes[] = { - &attr_online, - &attr_stepping_control, - &attr_state_code, - &attr_untuned, - &attr_network, - &attr_id, - &attr_port, - &attr_coupled, - &attr_local_time, - &attr_utc_offset, +static struct device_attribute *etr_port_attributes[] = { + &dev_attr_online, + &dev_attr_stepping_control, + &dev_attr_state_code, + &dev_attr_untuned, + &dev_attr_network, + &dev_attr_id, + &dev_attr_port, + &dev_attr_coupled, + &dev_attr_local_time, + &dev_attr_utc_offset, NULL }; -static int __init etr_register_port(struct sys_device *dev) +static int __init etr_register_port(struct device *dev) { - struct sysdev_attribute **attr; + struct device_attribute **attr; int rc; - rc = sysdev_register(dev); + rc = device_register(dev); if (rc) goto out; for (attr = etr_port_attributes; *attr; attr++) { - rc = sysdev_create_file(dev, *attr); + rc = device_create_file(dev, *attr); if (rc) goto out_unreg; } return 0; out_unreg: for (; attr >= etr_port_attributes; attr--) - sysdev_remove_file(dev, *attr); - sysdev_unregister(dev); + device_remove_file(dev, *attr); + device_unregister(dev); out: return rc; } -static void __init etr_unregister_port(struct sys_device *dev) +static void __init etr_unregister_port(struct device *dev) { - struct sysdev_attribute **attr; + struct device_attribute **attr; for (attr = etr_port_attributes; *attr; attr++) - sysdev_remove_file(dev, *attr); - sysdev_unregister(dev); + device_remove_file(dev, *attr); + device_unregister(dev); } static int __init etr_init_sysfs(void) { int rc; - rc = sysdev_class_register(&etr_sysclass); + rc = subsys_system_register(&etr_subsys, NULL); if (rc) goto out; - rc = sysdev_class_create_file(&etr_sysclass, &attr_stepping_port); + rc = device_create_file(etr_subsys.dev_root, &dev_attr_stepping_port); if (rc) - goto out_unreg_class; - rc = sysdev_class_create_file(&etr_sysclass, &attr_stepping_mode); + goto out_unreg_subsys; + rc = device_create_file(etr_subsys.dev_root, &dev_attr_stepping_mode); if (rc) goto out_remove_stepping_port; rc = etr_register_port(&etr_port0_dev); @@ -1395,11 +1396,11 @@ static int __init etr_init_sysfs(void) out_remove_port0: etr_unregister_port(&etr_port0_dev); out_remove_stepping_mode: - sysdev_class_remove_file(&etr_sysclass, &attr_stepping_mode); + device_remove_file(etr_subsys.dev_root, &dev_attr_stepping_mode); out_remove_stepping_port: - sysdev_class_remove_file(&etr_sysclass, &attr_stepping_port); -out_unreg_class: - sysdev_class_unregister(&etr_sysclass); + device_remove_file(etr_subsys.dev_root, &dev_attr_stepping_port); +out_unreg_subsys: + bus_unregister(&etr_subsys); out: return rc; } @@ -1599,14 +1600,15 @@ out_unlock: } /* - * STP class sysfs interface functions + * STP subsys sysfs interface functions */ -static struct sysdev_class stp_sysclass = { - .name = "stp", +static struct bus_type stp_subsys = { + .name = "stp", + .dev_name = "stp", }; -static ssize_t stp_ctn_id_show(struct sysdev_class *class, - struct sysdev_class_attribute *attr, +static ssize_t stp_ctn_id_show(struct device *dev, + struct device_attribute *attr, char *buf) { if (!stp_online) @@ -1615,10 +1617,10 @@ static ssize_t stp_ctn_id_show(struct sysdev_class *class, *(unsigned long long *) stp_info.ctnid); } -static SYSDEV_CLASS_ATTR(ctn_id, 0400, stp_ctn_id_show, NULL); +static DEVICE_ATTR(ctn_id, 0400, stp_ctn_id_show, NULL); -static ssize_t stp_ctn_type_show(struct sysdev_class *class, - struct sysdev_class_attribute *attr, +static ssize_t stp_ctn_type_show(struct device *dev, + struct device_attribute *attr, char *buf) { if (!stp_online) @@ -1626,10 +1628,10 @@ static ssize_t stp_ctn_type_show(struct sysdev_class *class, return sprintf(buf, "%i\n", stp_info.ctn); } -static SYSDEV_CLASS_ATTR(ctn_type, 0400, stp_ctn_type_show, NULL); +static DEVICE_ATTR(ctn_type, 0400, stp_ctn_type_show, NULL); -static ssize_t stp_dst_offset_show(struct sysdev_class *class, - struct sysdev_class_attribute *attr, +static ssize_t stp_dst_offset_show(struct device *dev, + struct device_attribute *attr, char *buf) { if (!stp_online || !(stp_info.vbits & 0x2000)) @@ -1637,10 +1639,10 @@ static ssize_t stp_dst_offset_show(struct sysdev_class *class, return sprintf(buf, "%i\n", (int)(s16) stp_info.dsto); } -static SYSDEV_CLASS_ATTR(dst_offset, 0400, stp_dst_offset_show, NULL); +static DEVICE_ATTR(dst_offset, 0400, stp_dst_offset_show, NULL); -static ssize_t stp_leap_seconds_show(struct sysdev_class *class, - struct sysdev_class_attribute *attr, +static ssize_t stp_leap_seconds_show(struct device *dev, + struct device_attribute *attr, char *buf) { if (!stp_online || !(stp_info.vbits & 0x8000)) @@ -1648,10 +1650,10 @@ static ssize_t stp_leap_seconds_show(struct sysdev_class *class, return sprintf(buf, "%i\n", (int)(s16) stp_info.leaps); } -static SYSDEV_CLASS_ATTR(leap_seconds, 0400, stp_leap_seconds_show, NULL); +static DEVICE_ATTR(leap_seconds, 0400, stp_leap_seconds_show, NULL); -static ssize_t stp_stratum_show(struct sysdev_class *class, - struct sysdev_class_attribute *attr, +static ssize_t stp_stratum_show(struct device *dev, + struct device_attribute *attr, char *buf) { if (!stp_online) @@ -1659,10 +1661,10 @@ static ssize_t stp_stratum_show(struct sysdev_class *class, return sprintf(buf, "%i\n", (int)(s16) stp_info.stratum); } -static SYSDEV_CLASS_ATTR(stratum, 0400, stp_stratum_show, NULL); +static DEVICE_ATTR(stratum, 0400, stp_stratum_show, NULL); -static ssize_t stp_time_offset_show(struct sysdev_class *class, - struct sysdev_class_attribute *attr, +static ssize_t stp_time_offset_show(struct device *dev, + struct device_attribute *attr, char *buf) { if (!stp_online || !(stp_info.vbits & 0x0800)) @@ -1670,10 +1672,10 @@ static ssize_t stp_time_offset_show(struct sysdev_class *class, return sprintf(buf, "%i\n", (int) stp_info.tto); } -static SYSDEV_CLASS_ATTR(time_offset, 0400, stp_time_offset_show, NULL); +static DEVICE_ATTR(time_offset, 0400, stp_time_offset_show, NULL); -static ssize_t stp_time_zone_offset_show(struct sysdev_class *class, - struct sysdev_class_attribute *attr, +static ssize_t stp_time_zone_offset_show(struct device *dev, + struct device_attribute *attr, char *buf) { if (!stp_online || !(stp_info.vbits & 0x4000)) @@ -1681,11 +1683,11 @@ static ssize_t stp_time_zone_offset_show(struct sysdev_class *class, return sprintf(buf, "%i\n", (int)(s16) stp_info.tzo); } -static SYSDEV_CLASS_ATTR(time_zone_offset, 0400, +static DEVICE_ATTR(time_zone_offset, 0400, stp_time_zone_offset_show, NULL); -static ssize_t stp_timing_mode_show(struct sysdev_class *class, - struct sysdev_class_attribute *attr, +static ssize_t stp_timing_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) { if (!stp_online) @@ -1693,10 +1695,10 @@ static ssize_t stp_timing_mode_show(struct sysdev_class *class, return sprintf(buf, "%i\n", stp_info.tmd); } -static SYSDEV_CLASS_ATTR(timing_mode, 0400, stp_timing_mode_show, NULL); +static DEVICE_ATTR(timing_mode, 0400, stp_timing_mode_show, NULL); -static ssize_t stp_timing_state_show(struct sysdev_class *class, - struct sysdev_class_attribute *attr, +static ssize_t stp_timing_state_show(struct device *dev, + struct device_attribute *attr, char *buf) { if (!stp_online) @@ -1704,17 +1706,17 @@ static ssize_t stp_timing_state_show(struct sysdev_class *class, return sprintf(buf, "%i\n", stp_info.tst); } -static SYSDEV_CLASS_ATTR(timing_state, 0400, stp_timing_state_show, NULL); +static DEVICE_ATTR(timing_state, 0400, stp_timing_state_show, NULL); -static ssize_t stp_online_show(struct sysdev_class *class, - struct sysdev_class_attribute *attr, +static ssize_t stp_online_show(struct device *dev, + struct device_attribute *attr, char *buf) { return sprintf(buf, "%i\n", stp_online); } -static ssize_t stp_online_store(struct sysdev_class *class, - struct sysdev_class_attribute *attr, +static ssize_t stp_online_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { unsigned int value; @@ -1736,47 +1738,47 @@ static ssize_t stp_online_store(struct sysdev_class *class, } /* - * Can't use SYSDEV_CLASS_ATTR because the attribute should be named - * stp/online but attr_online already exists in this file .. + * Can't use DEVICE_ATTR because the attribute should be named + * stp/online but dev_attr_online already exists in this file .. */ -static struct sysdev_class_attribute attr_stp_online = { +static struct device_attribute dev_attr_stp_online = { .attr = { .name = "online", .mode = 0600 }, .show = stp_online_show, .store = stp_online_store, }; -static struct sysdev_class_attribute *stp_attributes[] = { - &attr_ctn_id, - &attr_ctn_type, - &attr_dst_offset, - &attr_leap_seconds, - &attr_stp_online, - &attr_stratum, - &attr_time_offset, - &attr_time_zone_offset, - &attr_timing_mode, - &attr_timing_state, +static struct device_attribute *stp_attributes[] = { + &dev_attr_ctn_id, + &dev_attr_ctn_type, + &dev_attr_dst_offset, + &dev_attr_leap_seconds, + &dev_attr_stp_online, + &dev_attr_stratum, + &dev_attr_time_offset, + &dev_attr_time_zone_offset, + &dev_attr_timing_mode, + &dev_attr_timing_state, NULL }; static int __init stp_init_sysfs(void) { - struct sysdev_class_attribute **attr; + struct device_attribute **attr; int rc; - rc = sysdev_class_register(&stp_sysclass); + rc = subsys_system_register(&stp_subsys, NULL); if (rc) goto out; for (attr = stp_attributes; *attr; attr++) { - rc = sysdev_class_create_file(&stp_sysclass, *attr); + rc = device_create_file(stp_subsys.dev_root, *attr); if (rc) goto out_unreg; } return 0; out_unreg: for (; attr >= stp_attributes; attr--) - sysdev_class_remove_file(&stp_sysclass, *attr); - sysdev_class_unregister(&stp_sysclass); + device_remove_file(stp_subsys.dev_root, *attr); + bus_unregister(&stp_subsys); out: return rc; } diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index fdb5b8cb260f..7370a41948ca 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -1,22 +1,22 @@ /* - * Copyright IBM Corp. 2007 + * Copyright IBM Corp. 2007,2011 * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com> */ #define KMSG_COMPONENT "cpu" #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/device.h> +#include <linux/workqueue.h> #include <linux/bootmem.h> +#include <linux/cpuset.h> +#include <linux/device.h> +#include <linux/kernel.h> #include <linux/sched.h> -#include <linux/workqueue.h> +#include <linux/init.h> +#include <linux/delay.h> #include <linux/cpu.h> #include <linux/smp.h> -#include <linux/cpuset.h> -#include <asm/delay.h> +#include <linux/mm.h> #define PTF_HORIZONTAL (0UL) #define PTF_VERTICAL (1UL) @@ -31,7 +31,6 @@ struct mask_info { static int topology_enabled = 1; static void topology_work_fn(struct work_struct *work); static struct sysinfo_15_1_x *tl_info; -static struct timer_list topology_timer; static void set_topology_timer(void); static DECLARE_WORK(topology_work, topology_work_fn); /* topology_lock protects the core linked list */ @@ -41,11 +40,12 @@ static struct mask_info core_info; cpumask_t cpu_core_map[NR_CPUS]; unsigned char cpu_core_id[NR_CPUS]; -#ifdef CONFIG_SCHED_BOOK static struct mask_info book_info; cpumask_t cpu_book_map[NR_CPUS]; unsigned char cpu_book_id[NR_CPUS]; -#endif + +/* smp_cpu_state_mutex must be held when accessing this array */ +int cpu_polarization[NR_CPUS]; static cpumask_t cpu_group_map(struct mask_info *info, unsigned int cpu) { @@ -71,7 +71,7 @@ static cpumask_t cpu_group_map(struct mask_info *info, unsigned int cpu) static struct mask_info *add_cpus_to_mask(struct topology_cpu *tl_cpu, struct mask_info *book, struct mask_info *core, - int z10) + int one_core_per_cpu) { unsigned int cpu; @@ -85,18 +85,16 @@ static struct mask_info *add_cpus_to_mask(struct topology_cpu *tl_cpu, for_each_present_cpu(lcpu) { if (cpu_logical_map(lcpu) != rcpu) continue; -#ifdef CONFIG_SCHED_BOOK cpumask_set_cpu(lcpu, &book->mask); cpu_book_id[lcpu] = book->id; -#endif cpumask_set_cpu(lcpu, &core->mask); - if (z10) { + if (one_core_per_cpu) { cpu_core_id[lcpu] = rcpu; core = core->next; } else { cpu_core_id[lcpu] = core->id; } - smp_cpu_polarization[lcpu] = tl_cpu->pp; + cpu_set_polarization(lcpu, tl_cpu->pp); } } return core; @@ -111,13 +109,11 @@ static void clear_masks(void) cpumask_clear(&info->mask); info = info->next; } -#ifdef CONFIG_SCHED_BOOK info = &book_info; while (info) { cpumask_clear(&info->mask); info = info->next; } -#endif } static union topology_entry *next_tle(union topology_entry *tle) @@ -127,66 +123,75 @@ static union topology_entry *next_tle(union topology_entry *tle) return (union topology_entry *)((struct topology_container *)tle + 1); } -static void tl_to_cores(struct sysinfo_15_1_x *info) +static void __tl_to_cores_generic(struct sysinfo_15_1_x *info) { -#ifdef CONFIG_SCHED_BOOK - struct mask_info *book = &book_info; - struct cpuid cpu_id; -#else - struct mask_info *book = NULL; -#endif struct mask_info *core = &core_info; + struct mask_info *book = &book_info; union topology_entry *tle, *end; - int z10 = 0; -#ifdef CONFIG_SCHED_BOOK - get_cpu_id(&cpu_id); - z10 = cpu_id.machine == 0x2097 || cpu_id.machine == 0x2098; -#endif - spin_lock_irq(&topology_lock); - clear_masks(); tle = info->tle; end = (union topology_entry *)((unsigned long)info + info->length); while (tle < end) { -#ifdef CONFIG_SCHED_BOOK - if (z10) { - switch (tle->nl) { - case 1: - book = book->next; - book->id = tle->container.id; - break; - case 0: - core = add_cpus_to_mask(&tle->cpu, book, core, z10); - break; - default: - clear_masks(); - goto out; - } - tle = next_tle(tle); - continue; - } -#endif switch (tle->nl) { -#ifdef CONFIG_SCHED_BOOK case 2: book = book->next; book->id = tle->container.id; break; -#endif case 1: core = core->next; core->id = tle->container.id; break; case 0: - add_cpus_to_mask(&tle->cpu, book, core, z10); + add_cpus_to_mask(&tle->cpu, book, core, 0); break; default: clear_masks(); - goto out; + return; } tle = next_tle(tle); } -out: +} + +static void __tl_to_cores_z10(struct sysinfo_15_1_x *info) +{ + struct mask_info *core = &core_info; + struct mask_info *book = &book_info; + union topology_entry *tle, *end; + + tle = info->tle; + end = (union topology_entry *)((unsigned long)info + info->length); + while (tle < end) { + switch (tle->nl) { + case 1: + book = book->next; + book->id = tle->container.id; + break; + case 0: + core = add_cpus_to_mask(&tle->cpu, book, core, 1); + break; + default: + clear_masks(); + return; + } + tle = next_tle(tle); + } +} + +static void tl_to_cores(struct sysinfo_15_1_x *info) +{ + struct cpuid cpu_id; + + get_cpu_id(&cpu_id); + spin_lock_irq(&topology_lock); + clear_masks(); + switch (cpu_id.machine) { + case 0x2097: + case 0x2098: + __tl_to_cores_z10(info); + break; + default: + __tl_to_cores_generic(info); + } spin_unlock_irq(&topology_lock); } @@ -196,7 +201,7 @@ static void topology_update_polarization_simple(void) mutex_lock(&smp_cpu_state_mutex); for_each_possible_cpu(cpu) - smp_cpu_polarization[cpu] = POLARIZATION_HRZ; + cpu_set_polarization(cpu, POLARIZATION_HRZ); mutex_unlock(&smp_cpu_state_mutex); } @@ -215,8 +220,7 @@ static int ptf(unsigned long fc) int topology_set_cpu_management(int fc) { - int cpu; - int rc; + int cpu, rc; if (!MACHINE_HAS_TOPOLOGY) return -EOPNOTSUPP; @@ -227,7 +231,7 @@ int topology_set_cpu_management(int fc) if (rc) return -EBUSY; for_each_possible_cpu(cpu) - smp_cpu_polarization[cpu] = POLARIZATION_UNKNWN; + cpu_set_polarization(cpu, POLARIZATION_UNKNOWN); return rc; } @@ -239,29 +243,25 @@ static void update_cpu_core_map(void) spin_lock_irqsave(&topology_lock, flags); for_each_possible_cpu(cpu) { cpu_core_map[cpu] = cpu_group_map(&core_info, cpu); -#ifdef CONFIG_SCHED_BOOK cpu_book_map[cpu] = cpu_group_map(&book_info, cpu); -#endif } spin_unlock_irqrestore(&topology_lock, flags); } void store_topology(struct sysinfo_15_1_x *info) { -#ifdef CONFIG_SCHED_BOOK int rc; rc = stsi(info, 15, 1, 3); if (rc != -ENOSYS) return; -#endif stsi(info, 15, 1, 2); } int arch_update_cpu_topology(void) { struct sysinfo_15_1_x *info = tl_info; - struct sys_device *sysdev; + struct device *dev; int cpu; if (!MACHINE_HAS_TOPOLOGY) { @@ -273,8 +273,8 @@ int arch_update_cpu_topology(void) tl_to_cores(info); update_cpu_core_map(); for_each_online_cpu(cpu) { - sysdev = get_cpu_sysdev(cpu); - kobject_uevent(&sysdev->kobj, KOBJ_CHANGE); + dev = get_cpu_device(cpu); + kobject_uevent(&dev->kobj, KOBJ_CHANGE); } return 1; } @@ -296,12 +296,30 @@ static void topology_timer_fn(unsigned long ignored) set_topology_timer(); } +static struct timer_list topology_timer = + TIMER_DEFERRED_INITIALIZER(topology_timer_fn, 0, 0); + +static atomic_t topology_poll = ATOMIC_INIT(0); + static void set_topology_timer(void) { - topology_timer.function = topology_timer_fn; - topology_timer.data = 0; - topology_timer.expires = jiffies + 60 * HZ; - add_timer(&topology_timer); + if (atomic_add_unless(&topology_poll, -1, 0)) + mod_timer(&topology_timer, jiffies + HZ / 10); + else + mod_timer(&topology_timer, jiffies + HZ * 60); +} + +void topology_expect_change(void) +{ + if (!MACHINE_HAS_TOPOLOGY) + return; + /* This is racy, but it doesn't matter since it is just a heuristic. + * Worst case is that we poll in a higher frequency for a bit longer. + */ + if (atomic_read(&topology_poll) > 60) + return; + atomic_add(60, &topology_poll); + set_topology_timer(); } static int __init early_parse_topology(char *p) @@ -313,23 +331,6 @@ static int __init early_parse_topology(char *p) } early_param("topology", early_parse_topology); -static int __init init_topology_update(void) -{ - int rc; - - rc = 0; - if (!MACHINE_HAS_TOPOLOGY) { - topology_update_polarization_simple(); - goto out; - } - init_timer_deferrable(&topology_timer); - set_topology_timer(); -out: - update_cpu_core_map(); - return rc; -} -__initcall(init_topology_update); - static void __init alloc_masks(struct sysinfo_15_1_x *info, struct mask_info *mask, int offset) { @@ -357,10 +358,108 @@ void __init s390_init_cpu_topology(void) store_topology(info); pr_info("The CPU configuration topology of the machine is:"); for (i = 0; i < TOPOLOGY_NR_MAG; i++) - printk(" %d", info->mag[i]); - printk(" / %d\n", info->mnest); + printk(KERN_CONT " %d", info->mag[i]); + printk(KERN_CONT " / %d\n", info->mnest); alloc_masks(info, &core_info, 1); -#ifdef CONFIG_SCHED_BOOK alloc_masks(info, &book_info, 2); -#endif } + +static int cpu_management; + +static ssize_t dispatching_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + ssize_t count; + + mutex_lock(&smp_cpu_state_mutex); + count = sprintf(buf, "%d\n", cpu_management); + mutex_unlock(&smp_cpu_state_mutex); + return count; +} + +static ssize_t dispatching_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + int val, rc; + char delim; + + if (sscanf(buf, "%d %c", &val, &delim) != 1) + return -EINVAL; + if (val != 0 && val != 1) + return -EINVAL; + rc = 0; + get_online_cpus(); + mutex_lock(&smp_cpu_state_mutex); + if (cpu_management == val) + goto out; + rc = topology_set_cpu_management(val); + if (rc) + goto out; + cpu_management = val; + topology_expect_change(); +out: + mutex_unlock(&smp_cpu_state_mutex); + put_online_cpus(); + return rc ? rc : count; +} +static DEVICE_ATTR(dispatching, 0644, dispatching_show, + dispatching_store); + +static ssize_t cpu_polarization_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int cpu = dev->id; + ssize_t count; + + mutex_lock(&smp_cpu_state_mutex); + switch (cpu_read_polarization(cpu)) { + case POLARIZATION_HRZ: + count = sprintf(buf, "horizontal\n"); + break; + case POLARIZATION_VL: + count = sprintf(buf, "vertical:low\n"); + break; + case POLARIZATION_VM: + count = sprintf(buf, "vertical:medium\n"); + break; + case POLARIZATION_VH: + count = sprintf(buf, "vertical:high\n"); + break; + default: + count = sprintf(buf, "unknown\n"); + break; + } + mutex_unlock(&smp_cpu_state_mutex); + return count; +} +static DEVICE_ATTR(polarization, 0444, cpu_polarization_show, NULL); + +static struct attribute *topology_cpu_attrs[] = { + &dev_attr_polarization.attr, + NULL, +}; + +static struct attribute_group topology_cpu_attr_group = { + .attrs = topology_cpu_attrs, +}; + +int topology_cpu_init(struct cpu *cpu) +{ + return sysfs_create_group(&cpu->dev.kobj, &topology_cpu_attr_group); +} + +static int __init topology_init(void) +{ + if (!MACHINE_HAS_TOPOLOGY) { + topology_update_polarization_simple(); + goto out; + } + set_topology_timer(); +out: + update_cpu_core_map(); + return device_create_file(cpu_subsys.dev_root, &dev_attr_dispatching); +} +device_initcall(topology_init); diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index a9807dd86276..5ce3750b181f 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -43,9 +43,9 @@ #include <asm/debug.h> #include "entry.h" -void (*pgm_check_table[128])(struct pt_regs *, long, unsigned long); +void (*pgm_check_table[128])(struct pt_regs *regs); -int show_unhandled_signals; +int show_unhandled_signals = 1; #define stack_pointer ({ void **sp; asm("la %0,0(15)" : "=&d" (sp)); sp; }) @@ -234,7 +234,7 @@ void show_regs(struct pt_regs *regs) static DEFINE_SPINLOCK(die_lock); -void die(const char * str, struct pt_regs * regs, long err) +void die(struct pt_regs *regs, const char *str) { static int die_counter; @@ -243,7 +243,7 @@ void die(const char * str, struct pt_regs * regs, long err) console_verbose(); spin_lock_irq(&die_lock); bust_spinlocks(1); - printk("%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter); + printk("%s: %04x [#%d] ", str, regs->int_code & 0xffff, ++die_counter); #ifdef CONFIG_PREEMPT printk("PREEMPT "); #endif @@ -254,7 +254,7 @@ void die(const char * str, struct pt_regs * regs, long err) printk("DEBUG_PAGEALLOC"); #endif printk("\n"); - notify_die(DIE_OOPS, str, regs, err, current->thread.trap_no, SIGSEGV); + notify_die(DIE_OOPS, str, regs, 0, regs->int_code & 0xffff, SIGSEGV); show_regs(regs); bust_spinlocks(0); add_taint(TAINT_DIE); @@ -267,8 +267,7 @@ void die(const char * str, struct pt_regs * regs, long err) do_exit(SIGSEGV); } -static void inline report_user_fault(struct pt_regs *regs, long int_code, - int signr) +static inline void report_user_fault(struct pt_regs *regs, int signr) { if ((task_pid_nr(current) > 1) && !show_unhandled_signals) return; @@ -276,7 +275,7 @@ static void inline report_user_fault(struct pt_regs *regs, long int_code, return; if (!printk_ratelimit()) return; - printk("User process fault: interruption code 0x%lX ", int_code); + printk("User process fault: interruption code 0x%X ", regs->int_code); print_vma_addr("in ", regs->psw.addr & PSW_ADDR_INSN); printk("\n"); show_regs(regs); @@ -287,19 +286,28 @@ int is_valid_bugaddr(unsigned long addr) return 1; } -static inline void __kprobes do_trap(long pgm_int_code, int signr, char *str, - struct pt_regs *regs, siginfo_t *info) +static inline void __user *get_psw_address(struct pt_regs *regs) { - if (notify_die(DIE_TRAP, str, regs, pgm_int_code, - pgm_int_code, signr) == NOTIFY_STOP) + return (void __user *) + ((regs->psw.addr - (regs->int_code >> 16)) & PSW_ADDR_INSN); +} + +static void __kprobes do_trap(struct pt_regs *regs, + int si_signo, int si_code, char *str) +{ + siginfo_t info; + + if (notify_die(DIE_TRAP, str, regs, 0, + regs->int_code, si_signo) == NOTIFY_STOP) return; if (regs->psw.mask & PSW_MASK_PSTATE) { - struct task_struct *tsk = current; - - tsk->thread.trap_no = pgm_int_code & 0xffff; - force_sig_info(signr, info, tsk); - report_user_fault(regs, pgm_int_code, signr); + info.si_signo = si_signo; + info.si_errno = 0; + info.si_code = si_code; + info.si_addr = get_psw_address(regs); + force_sig_info(si_signo, &info, current); + report_user_fault(regs, si_signo); } else { const struct exception_table_entry *fixup; fixup = search_exception_tables(regs->psw.addr & PSW_ADDR_INSN); @@ -311,18 +319,11 @@ static inline void __kprobes do_trap(long pgm_int_code, int signr, char *str, btt = report_bug(regs->psw.addr & PSW_ADDR_INSN, regs); if (btt == BUG_TRAP_TYPE_WARN) return; - die(str, regs, pgm_int_code); + die(regs, str); } } } -static inline void __user *get_psw_address(struct pt_regs *regs, - long pgm_int_code) -{ - return (void __user *) - ((regs->psw.addr - (pgm_int_code >> 16)) & PSW_ADDR_INSN); -} - void __kprobes do_per_trap(struct pt_regs *regs) { siginfo_t info; @@ -339,26 +340,19 @@ void __kprobes do_per_trap(struct pt_regs *regs) force_sig_info(SIGTRAP, &info, current); } -static void default_trap_handler(struct pt_regs *regs, long pgm_int_code, - unsigned long trans_exc_code) +static void default_trap_handler(struct pt_regs *regs) { if (regs->psw.mask & PSW_MASK_PSTATE) { - report_user_fault(regs, pgm_int_code, SIGSEGV); + report_user_fault(regs, SIGSEGV); do_exit(SIGSEGV); } else - die("Unknown program exception", regs, pgm_int_code); + die(regs, "Unknown program exception"); } #define DO_ERROR_INFO(name, signr, sicode, str) \ -static void name(struct pt_regs *regs, long pgm_int_code, \ - unsigned long trans_exc_code) \ +static void name(struct pt_regs *regs) \ { \ - siginfo_t info; \ - info.si_signo = signr; \ - info.si_errno = 0; \ - info.si_code = sicode; \ - info.si_addr = get_psw_address(regs, pgm_int_code); \ - do_trap(pgm_int_code, signr, str, regs, &info); \ + do_trap(regs, signr, sicode, str); \ } DO_ERROR_INFO(addressing_exception, SIGILL, ILL_ILLADR, @@ -388,42 +382,34 @@ DO_ERROR_INFO(special_op_exception, SIGILL, ILL_ILLOPN, DO_ERROR_INFO(translation_exception, SIGILL, ILL_ILLOPN, "translation exception") -static inline void do_fp_trap(struct pt_regs *regs, void __user *location, - int fpc, long pgm_int_code) +static inline void do_fp_trap(struct pt_regs *regs, int fpc) { - siginfo_t si; - - si.si_signo = SIGFPE; - si.si_errno = 0; - si.si_addr = location; - si.si_code = 0; + int si_code = 0; /* FPC[2] is Data Exception Code */ if ((fpc & 0x00000300) == 0) { /* bits 6 and 7 of DXC are 0 iff IEEE exception */ if (fpc & 0x8000) /* invalid fp operation */ - si.si_code = FPE_FLTINV; + si_code = FPE_FLTINV; else if (fpc & 0x4000) /* div by 0 */ - si.si_code = FPE_FLTDIV; + si_code = FPE_FLTDIV; else if (fpc & 0x2000) /* overflow */ - si.si_code = FPE_FLTOVF; + si_code = FPE_FLTOVF; else if (fpc & 0x1000) /* underflow */ - si.si_code = FPE_FLTUND; + si_code = FPE_FLTUND; else if (fpc & 0x0800) /* inexact */ - si.si_code = FPE_FLTRES; + si_code = FPE_FLTRES; } - do_trap(pgm_int_code, SIGFPE, - "floating point exception", regs, &si); + do_trap(regs, SIGFPE, si_code, "floating point exception"); } -static void __kprobes illegal_op(struct pt_regs *regs, long pgm_int_code, - unsigned long trans_exc_code) +static void __kprobes illegal_op(struct pt_regs *regs) { siginfo_t info; __u8 opcode[6]; __u16 __user *location; int signal = 0; - location = get_psw_address(regs, pgm_int_code); + location = get_psw_address(regs); if (regs->psw.mask & PSW_MASK_PSTATE) { if (get_user(*((__u16 *) opcode), (__u16 __user *) location)) @@ -467,44 +453,31 @@ static void __kprobes illegal_op(struct pt_regs *regs, long pgm_int_code, * If we get an illegal op in kernel mode, send it through the * kprobes notifier. If kprobes doesn't pick it up, SIGILL */ - if (notify_die(DIE_BPT, "bpt", regs, pgm_int_code, + if (notify_die(DIE_BPT, "bpt", regs, 0, 3, SIGTRAP) != NOTIFY_STOP) signal = SIGILL; } #ifdef CONFIG_MATHEMU if (signal == SIGFPE) - do_fp_trap(regs, location, - current->thread.fp_regs.fpc, pgm_int_code); - else if (signal == SIGSEGV) { - info.si_signo = signal; - info.si_errno = 0; - info.si_code = SEGV_MAPERR; - info.si_addr = (void __user *) location; - do_trap(pgm_int_code, signal, - "user address fault", regs, &info); - } else + do_fp_trap(regs, current->thread.fp_regs.fpc); + else if (signal == SIGSEGV) + do_trap(regs, signal, SEGV_MAPERR, "user address fault"); + else #endif - if (signal) { - info.si_signo = signal; - info.si_errno = 0; - info.si_code = ILL_ILLOPC; - info.si_addr = (void __user *) location; - do_trap(pgm_int_code, signal, - "illegal operation", regs, &info); - } + if (signal) + do_trap(regs, signal, ILL_ILLOPC, "illegal operation"); } #ifdef CONFIG_MATHEMU -void specification_exception(struct pt_regs *regs, long pgm_int_code, - unsigned long trans_exc_code) +void specification_exception(struct pt_regs *regs) { __u8 opcode[6]; __u16 __user *location = NULL; int signal = 0; - location = (__u16 __user *) get_psw_address(regs, pgm_int_code); + location = (__u16 __user *) get_psw_address(regs); if (regs->psw.mask & PSW_MASK_PSTATE) { get_user(*((__u16 *) opcode), location); @@ -539,30 +512,21 @@ void specification_exception(struct pt_regs *regs, long pgm_int_code, signal = SIGILL; if (signal == SIGFPE) - do_fp_trap(regs, location, - current->thread.fp_regs.fpc, pgm_int_code); - else if (signal) { - siginfo_t info; - info.si_signo = signal; - info.si_errno = 0; - info.si_code = ILL_ILLOPN; - info.si_addr = location; - do_trap(pgm_int_code, signal, - "specification exception", regs, &info); - } + do_fp_trap(regs, current->thread.fp_regs.fpc); + else if (signal) + do_trap(regs, signal, ILL_ILLOPN, "specification exception"); } #else DO_ERROR_INFO(specification_exception, SIGILL, ILL_ILLOPN, "specification exception"); #endif -static void data_exception(struct pt_regs *regs, long pgm_int_code, - unsigned long trans_exc_code) +static void data_exception(struct pt_regs *regs) { __u16 __user *location; int signal = 0; - location = get_psw_address(regs, pgm_int_code); + location = get_psw_address(regs); if (MACHINE_HAS_IEEE) asm volatile("stfpc %0" : "=m" (current->thread.fp_regs.fpc)); @@ -627,32 +591,18 @@ static void data_exception(struct pt_regs *regs, long pgm_int_code, else signal = SIGILL; if (signal == SIGFPE) - do_fp_trap(regs, location, - current->thread.fp_regs.fpc, pgm_int_code); - else if (signal) { - siginfo_t info; - info.si_signo = signal; - info.si_errno = 0; - info.si_code = ILL_ILLOPN; - info.si_addr = location; - do_trap(pgm_int_code, signal, "data exception", regs, &info); - } + do_fp_trap(regs, current->thread.fp_regs.fpc); + else if (signal) + do_trap(regs, signal, ILL_ILLOPN, "data exception"); } -static void space_switch_exception(struct pt_regs *regs, long pgm_int_code, - unsigned long trans_exc_code) +static void space_switch_exception(struct pt_regs *regs) { - siginfo_t info; - /* Set user psw back to home space mode. */ if (regs->psw.mask & PSW_MASK_PSTATE) regs->psw.mask |= PSW_ASC_HOME; /* Send SIGILL. */ - info.si_signo = SIGILL; - info.si_errno = 0; - info.si_code = ILL_PRVOPC; - info.si_addr = get_psw_address(regs, pgm_int_code); - do_trap(pgm_int_code, SIGILL, "space switch event", regs, &info); + do_trap(regs, SIGILL, ILL_PRVOPC, "space switch event"); } void __kprobes kernel_stack_overflow(struct pt_regs * regs) diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index a9a301866b3c..354dd39073ef 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -125,8 +125,7 @@ static inline int user_space_fault(unsigned long trans_exc_code) return trans_exc_code != 3; } -static inline void report_user_fault(struct pt_regs *regs, long int_code, - int signr, unsigned long address) +static inline void report_user_fault(struct pt_regs *regs, long signr) { if ((task_pid_nr(current) > 1) && !show_unhandled_signals) return; @@ -134,10 +133,12 @@ static inline void report_user_fault(struct pt_regs *regs, long int_code, return; if (!printk_ratelimit()) return; - printk("User process fault: interruption code 0x%lX ", int_code); + printk(KERN_ALERT "User process fault: interruption code 0x%X ", + regs->int_code); print_vma_addr(KERN_CONT "in ", regs->psw.addr & PSW_ADDR_INSN); - printk("\n"); - printk("failing address: %lX\n", address); + printk(KERN_CONT "\n"); + printk(KERN_ALERT "failing address: %lX\n", + regs->int_parm_long & __FAIL_ADDR_MASK); show_regs(regs); } @@ -145,24 +146,18 @@ static inline void report_user_fault(struct pt_regs *regs, long int_code, * Send SIGSEGV to task. This is an external routine * to keep the stack usage of do_page_fault small. */ -static noinline void do_sigsegv(struct pt_regs *regs, long int_code, - int si_code, unsigned long trans_exc_code) +static noinline void do_sigsegv(struct pt_regs *regs, int si_code) { struct siginfo si; - unsigned long address; - address = trans_exc_code & __FAIL_ADDR_MASK; - current->thread.prot_addr = address; - current->thread.trap_no = int_code; - report_user_fault(regs, int_code, SIGSEGV, address); + report_user_fault(regs, SIGSEGV); si.si_signo = SIGSEGV; si.si_code = si_code; - si.si_addr = (void __user *) address; + si.si_addr = (void __user *)(regs->int_parm_long & __FAIL_ADDR_MASK); force_sig_info(SIGSEGV, &si, current); } -static noinline void do_no_context(struct pt_regs *regs, long int_code, - unsigned long trans_exc_code) +static noinline void do_no_context(struct pt_regs *regs) { const struct exception_table_entry *fixup; unsigned long address; @@ -178,55 +173,48 @@ static noinline void do_no_context(struct pt_regs *regs, long int_code, * Oops. The kernel tried to access some bad page. We'll have to * terminate things with extreme prejudice. */ - address = trans_exc_code & __FAIL_ADDR_MASK; - if (!user_space_fault(trans_exc_code)) + address = regs->int_parm_long & __FAIL_ADDR_MASK; + if (!user_space_fault(regs->int_parm_long)) printk(KERN_ALERT "Unable to handle kernel pointer dereference" " at virtual kernel address %p\n", (void *)address); else printk(KERN_ALERT "Unable to handle kernel paging request" " at virtual user address %p\n", (void *)address); - die("Oops", regs, int_code); + die(regs, "Oops"); do_exit(SIGKILL); } -static noinline void do_low_address(struct pt_regs *regs, long int_code, - unsigned long trans_exc_code) +static noinline void do_low_address(struct pt_regs *regs) { /* Low-address protection hit in kernel mode means NULL pointer write access in kernel mode. */ if (regs->psw.mask & PSW_MASK_PSTATE) { /* Low-address protection hit in user mode 'cannot happen'. */ - die ("Low-address protection", regs, int_code); + die (regs, "Low-address protection"); do_exit(SIGKILL); } - do_no_context(regs, int_code, trans_exc_code); + do_no_context(regs); } -static noinline void do_sigbus(struct pt_regs *regs, long int_code, - unsigned long trans_exc_code) +static noinline void do_sigbus(struct pt_regs *regs) { struct task_struct *tsk = current; - unsigned long address; struct siginfo si; /* * Send a sigbus, regardless of whether we were in kernel * or user mode. */ - address = trans_exc_code & __FAIL_ADDR_MASK; - tsk->thread.prot_addr = address; - tsk->thread.trap_no = int_code; si.si_signo = SIGBUS; si.si_errno = 0; si.si_code = BUS_ADRERR; - si.si_addr = (void __user *) address; + si.si_addr = (void __user *)(regs->int_parm_long & __FAIL_ADDR_MASK); force_sig_info(SIGBUS, &si, tsk); } -static noinline void do_fault_error(struct pt_regs *regs, long int_code, - unsigned long trans_exc_code, int fault) +static noinline void do_fault_error(struct pt_regs *regs, int fault) { int si_code; @@ -238,24 +226,24 @@ static noinline void do_fault_error(struct pt_regs *regs, long int_code, /* User mode accesses just cause a SIGSEGV */ si_code = (fault == VM_FAULT_BADMAP) ? SEGV_MAPERR : SEGV_ACCERR; - do_sigsegv(regs, int_code, si_code, trans_exc_code); + do_sigsegv(regs, si_code); return; } case VM_FAULT_BADCONTEXT: - do_no_context(regs, int_code, trans_exc_code); + do_no_context(regs); break; default: /* fault & VM_FAULT_ERROR */ if (fault & VM_FAULT_OOM) { if (!(regs->psw.mask & PSW_MASK_PSTATE)) - do_no_context(regs, int_code, trans_exc_code); + do_no_context(regs); else pagefault_out_of_memory(); } else if (fault & VM_FAULT_SIGBUS) { /* Kernel mode? Handle exceptions or die */ if (!(regs->psw.mask & PSW_MASK_PSTATE)) - do_no_context(regs, int_code, trans_exc_code); + do_no_context(regs); else - do_sigbus(regs, int_code, trans_exc_code); + do_sigbus(regs); } else BUG(); break; @@ -273,12 +261,12 @@ static noinline void do_fault_error(struct pt_regs *regs, long int_code, * 11 Page translation -> Not present (nullification) * 3b Region third trans. -> Not present (nullification) */ -static inline int do_exception(struct pt_regs *regs, int access, - unsigned long trans_exc_code) +static inline int do_exception(struct pt_regs *regs, int access) { struct task_struct *tsk; struct mm_struct *mm; struct vm_area_struct *vma; + unsigned long trans_exc_code; unsigned long address; unsigned int flags; int fault; @@ -288,6 +276,7 @@ static inline int do_exception(struct pt_regs *regs, int access, tsk = current; mm = tsk->mm; + trans_exc_code = regs->int_parm_long; /* * Verify that the fault happened in user space, that @@ -387,45 +376,46 @@ out: return fault; } -void __kprobes do_protection_exception(struct pt_regs *regs, long pgm_int_code, - unsigned long trans_exc_code) +void __kprobes do_protection_exception(struct pt_regs *regs) { + unsigned long trans_exc_code; int fault; + trans_exc_code = regs->int_parm_long; /* Protection exception is suppressing, decrement psw address. */ - regs->psw.addr = __rewind_psw(regs->psw, pgm_int_code >> 16); + regs->psw.addr = __rewind_psw(regs->psw, regs->int_code >> 16); /* * Check for low-address protection. This needs to be treated * as a special case because the translation exception code * field is not guaranteed to contain valid data in this case. */ if (unlikely(!(trans_exc_code & 4))) { - do_low_address(regs, pgm_int_code, trans_exc_code); + do_low_address(regs); return; } - fault = do_exception(regs, VM_WRITE, trans_exc_code); + fault = do_exception(regs, VM_WRITE); if (unlikely(fault)) - do_fault_error(regs, 4, trans_exc_code, fault); + do_fault_error(regs, fault); } -void __kprobes do_dat_exception(struct pt_regs *regs, long pgm_int_code, - unsigned long trans_exc_code) +void __kprobes do_dat_exception(struct pt_regs *regs) { int access, fault; access = VM_READ | VM_EXEC | VM_WRITE; - fault = do_exception(regs, access, trans_exc_code); + fault = do_exception(regs, access); if (unlikely(fault)) - do_fault_error(regs, pgm_int_code & 255, trans_exc_code, fault); + do_fault_error(regs, fault); } #ifdef CONFIG_64BIT -void __kprobes do_asce_exception(struct pt_regs *regs, long pgm_int_code, - unsigned long trans_exc_code) +void __kprobes do_asce_exception(struct pt_regs *regs) { struct mm_struct *mm = current->mm; struct vm_area_struct *vma; + unsigned long trans_exc_code; + trans_exc_code = regs->int_parm_long; if (unlikely(!user_space_fault(trans_exc_code) || in_atomic() || !mm)) goto no_context; @@ -440,12 +430,12 @@ void __kprobes do_asce_exception(struct pt_regs *regs, long pgm_int_code, /* User mode accesses just cause a SIGSEGV */ if (regs->psw.mask & PSW_MASK_PSTATE) { - do_sigsegv(regs, pgm_int_code, SEGV_MAPERR, trans_exc_code); + do_sigsegv(regs, SEGV_MAPERR); return; } no_context: - do_no_context(regs, pgm_int_code, trans_exc_code); + do_no_context(regs); } #endif @@ -459,14 +449,15 @@ int __handle_fault(unsigned long uaddr, unsigned long pgm_int_code, int write) regs.psw.mask |= PSW_MASK_IO | PSW_MASK_EXT; regs.psw.addr = (unsigned long) __builtin_return_address(0); regs.psw.addr |= PSW_ADDR_AMODE; - uaddr &= PAGE_MASK; + regs.int_code = pgm_int_code; + regs.int_parm_long = (uaddr & PAGE_MASK) | 2; access = write ? VM_WRITE : VM_READ; - fault = do_exception(®s, access, uaddr | 2); + fault = do_exception(®s, access); if (unlikely(fault)) { if (fault & VM_FAULT_OOM) return -EFAULT; else if (fault & VM_FAULT_SIGBUS) - do_sigbus(®s, pgm_int_code, uaddr); + do_sigbus(®s); } return fault ? -EFAULT : 0; } @@ -509,7 +500,7 @@ int pfault_init(void) .reserved = __PF_RES_FIELD }; int rc; - if (!MACHINE_IS_VM || pfault_disable) + if (pfault_disable) return -1; asm volatile( " diag %1,%0,0x258\n" @@ -530,7 +521,7 @@ void pfault_fini(void) .refversn = 2, }; - if (!MACHINE_IS_VM || pfault_disable) + if (pfault_disable) return; asm volatile( " diag %0,0,0x258\n" @@ -643,8 +634,6 @@ static int __init pfault_irq_init(void) { int rc; - if (!MACHINE_IS_VM) - return 0; rc = register_external_interrupt(0x2603, pfault_interrupt); if (rc) goto out_extint; diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index d4b9fb4d0042..5d633019d8f3 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -93,18 +93,22 @@ static unsigned long setup_zero_pages(void) void __init paging_init(void) { unsigned long max_zone_pfns[MAX_NR_ZONES]; - unsigned long pgd_type; + unsigned long pgd_type, asce_bits; init_mm.pgd = swapper_pg_dir; - S390_lowcore.kernel_asce = __pa(init_mm.pgd) & PAGE_MASK; #ifdef CONFIG_64BIT - /* A three level page table (4TB) is enough for the kernel space. */ - S390_lowcore.kernel_asce |= _ASCE_TYPE_REGION3 | _ASCE_TABLE_LENGTH; - pgd_type = _REGION3_ENTRY_EMPTY; + if (VMALLOC_END > (1UL << 42)) { + asce_bits = _ASCE_TYPE_REGION2 | _ASCE_TABLE_LENGTH; + pgd_type = _REGION2_ENTRY_EMPTY; + } else { + asce_bits = _ASCE_TYPE_REGION3 | _ASCE_TABLE_LENGTH; + pgd_type = _REGION3_ENTRY_EMPTY; + } #else - S390_lowcore.kernel_asce |= _ASCE_TABLE_LENGTH; + asce_bits = _ASCE_TABLE_LENGTH; pgd_type = _SEGMENT_ENTRY_EMPTY; #endif + S390_lowcore.kernel_asce = (__pa(init_mm.pgd) & PAGE_MASK) | asce_bits; clear_table((unsigned long *) init_mm.pgd, pgd_type, sizeof(unsigned long)*2048); vmem_map_init(); diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 301c84d3b542..9a4d02f64f16 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -33,17 +33,6 @@ #define FRAG_MASK 0x03 #endif -unsigned long VMALLOC_START = VMALLOC_END - VMALLOC_SIZE; -EXPORT_SYMBOL(VMALLOC_START); - -static int __init parse_vmalloc(char *arg) -{ - if (!arg) - return -EINVAL; - VMALLOC_START = (VMALLOC_END - memparse(arg, &arg)) & PAGE_MASK; - return 0; -} -early_param("vmalloc", parse_vmalloc); unsigned long *crst_table_alloc(struct mm_struct *mm) { @@ -267,7 +256,10 @@ static int gmap_alloc_table(struct gmap *gmap, struct page *page; unsigned long *new; + /* since we dont free the gmap table until gmap_free we can unlock */ + spin_unlock(&gmap->mm->page_table_lock); page = alloc_pages(GFP_KERNEL, ALLOC_ORDER); + spin_lock(&gmap->mm->page_table_lock); if (!page) return -ENOMEM; new = (unsigned long *) page_to_phys(page); diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c index f43c0e4282af..9daee91e6c3f 100644 --- a/arch/s390/oprofile/hwsampler.c +++ b/arch/s390/oprofile/hwsampler.c @@ -22,6 +22,7 @@ #include <asm/irq.h> #include "hwsampler.h" +#include "op_counter.h" #define MAX_NUM_SDB 511 #define MIN_NUM_SDB 1 @@ -896,6 +897,8 @@ static void add_samples_to_oprofile(unsigned int cpu, unsigned long *sdbt, if (sample_data_ptr->P == 1) { /* userspace sample */ unsigned int pid = sample_data_ptr->prim_asn; + if (!counter_config.user) + goto skip_sample; rcu_read_lock(); tsk = pid_task(find_vpid(pid), PIDTYPE_PID); if (tsk) @@ -903,6 +906,8 @@ static void add_samples_to_oprofile(unsigned int cpu, unsigned long *sdbt, rcu_read_unlock(); } else { /* kernelspace sample */ + if (!counter_config.kernel) + goto skip_sample; regs = task_pt_regs(current); } @@ -910,7 +915,7 @@ static void add_samples_to_oprofile(unsigned int cpu, unsigned long *sdbt, oprofile_add_ext_hw_sample(sample_data_ptr->ia, regs, 0, !sample_data_ptr->P, tsk); mutex_unlock(&hws_sem); - + skip_sample: sample_data_ptr++; } } diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c index 6efc18b5e60a..2297be406c61 100644 --- a/arch/s390/oprofile/init.c +++ b/arch/s390/oprofile/init.c @@ -2,10 +2,11 @@ * arch/s390/oprofile/init.c * * S390 Version - * Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Copyright (C) 2002-2011 IBM Deutschland Entwicklung GmbH, IBM Corporation * Author(s): Thomas Spatzier (tspat@de.ibm.com) * Author(s): Mahesh Salgaonkar (mahesh@linux.vnet.ibm.com) * Author(s): Heinz Graalfs (graalfs@linux.vnet.ibm.com) + * Author(s): Andreas Krebbel (krebbel@linux.vnet.ibm.com) * * @remark Copyright 2002-2011 OProfile authors */ @@ -14,6 +15,8 @@ #include <linux/init.h> #include <linux/errno.h> #include <linux/fs.h> +#include <linux/module.h> +#include <asm/processor.h> #include "../../../drivers/oprofile/oprof.h" @@ -22,6 +25,7 @@ extern void s390_backtrace(struct pt_regs * const regs, unsigned int depth); #ifdef CONFIG_64BIT #include "hwsampler.h" +#include "op_counter.h" #define DEFAULT_INTERVAL 4127518 @@ -35,16 +39,41 @@ static unsigned long oprofile_max_interval; static unsigned long oprofile_sdbt_blocks = DEFAULT_SDBT_BLOCKS; static unsigned long oprofile_sdb_blocks = DEFAULT_SDB_BLOCKS; -static int hwsampler_file; +static int hwsampler_enabled; static int hwsampler_running; /* start_mutex must be held to change */ +static int hwsampler_available; static struct oprofile_operations timer_ops; +struct op_counter_config counter_config; + +enum __force_cpu_type { + reserved = 0, /* do not force */ + timer, +}; +static int force_cpu_type; + +static int set_cpu_type(const char *str, struct kernel_param *kp) +{ + if (!strcmp(str, "timer")) { + force_cpu_type = timer; + printk(KERN_INFO "oprofile: forcing timer to be returned " + "as cpu type\n"); + } else { + force_cpu_type = 0; + } + + return 0; +} +module_param_call(cpu_type, set_cpu_type, NULL, NULL, 0); +MODULE_PARM_DESC(cpu_type, "Force legacy basic mode sampling" + "(report cpu_type \"timer\""); + static int oprofile_hwsampler_start(void) { int retval; - hwsampler_running = hwsampler_file; + hwsampler_running = hwsampler_enabled; if (!hwsampler_running) return timer_ops.start(); @@ -72,10 +101,16 @@ static void oprofile_hwsampler_stop(void) return; } +/* + * File ops used for: + * /dev/oprofile/0/enabled + * /dev/oprofile/hwsampling/hwsampler (cpu_type = timer) + */ + static ssize_t hwsampler_read(struct file *file, char __user *buf, size_t count, loff_t *offset) { - return oprofilefs_ulong_to_user(hwsampler_file, buf, count, offset); + return oprofilefs_ulong_to_user(hwsampler_enabled, buf, count, offset); } static ssize_t hwsampler_write(struct file *file, char const __user *buf, @@ -88,9 +123,12 @@ static ssize_t hwsampler_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; + if (val != 0 && val != 1) + return -EINVAL; + if (oprofile_started) /* * save to do without locking as we set @@ -99,7 +137,7 @@ static ssize_t hwsampler_write(struct file *file, char const __user *buf, */ return -EBUSY; - hwsampler_file = val; + hwsampler_enabled = val; return count; } @@ -109,38 +147,311 @@ static const struct file_operations hwsampler_fops = { .write = hwsampler_write, }; +/* + * File ops used for: + * /dev/oprofile/0/count + * /dev/oprofile/hwsampling/hw_interval (cpu_type = timer) + * + * Make sure that the value is within the hardware range. + */ + +static ssize_t hw_interval_read(struct file *file, char __user *buf, + size_t count, loff_t *offset) +{ + return oprofilefs_ulong_to_user(oprofile_hw_interval, buf, + count, offset); +} + +static ssize_t hw_interval_write(struct file *file, char const __user *buf, + size_t count, loff_t *offset) +{ + unsigned long val; + int retval; + + if (*offset) + return -EINVAL; + retval = oprofilefs_ulong_from_user(&val, buf, count); + if (retval) + return retval; + if (val < oprofile_min_interval) + oprofile_hw_interval = oprofile_min_interval; + else if (val > oprofile_max_interval) + oprofile_hw_interval = oprofile_max_interval; + else + oprofile_hw_interval = val; + + return count; +} + +static const struct file_operations hw_interval_fops = { + .read = hw_interval_read, + .write = hw_interval_write, +}; + +/* + * File ops used for: + * /dev/oprofile/0/event + * Only a single event with number 0 is supported with this counter. + * + * /dev/oprofile/0/unit_mask + * This is a dummy file needed by the user space tools. + * No value other than 0 is accepted or returned. + */ + +static ssize_t hwsampler_zero_read(struct file *file, char __user *buf, + size_t count, loff_t *offset) +{ + return oprofilefs_ulong_to_user(0, buf, count, offset); +} + +static ssize_t hwsampler_zero_write(struct file *file, char const __user *buf, + size_t count, loff_t *offset) +{ + unsigned long val; + int retval; + + if (*offset) + return -EINVAL; + + retval = oprofilefs_ulong_from_user(&val, buf, count); + if (retval) + return retval; + if (val != 0) + return -EINVAL; + return count; +} + +static const struct file_operations zero_fops = { + .read = hwsampler_zero_read, + .write = hwsampler_zero_write, +}; + +/* /dev/oprofile/0/kernel file ops. */ + +static ssize_t hwsampler_kernel_read(struct file *file, char __user *buf, + size_t count, loff_t *offset) +{ + return oprofilefs_ulong_to_user(counter_config.kernel, + buf, count, offset); +} + +static ssize_t hwsampler_kernel_write(struct file *file, char const __user *buf, + size_t count, loff_t *offset) +{ + unsigned long val; + int retval; + + if (*offset) + return -EINVAL; + + retval = oprofilefs_ulong_from_user(&val, buf, count); + if (retval) + return retval; + + if (val != 0 && val != 1) + return -EINVAL; + + counter_config.kernel = val; + + return count; +} + +static const struct file_operations kernel_fops = { + .read = hwsampler_kernel_read, + .write = hwsampler_kernel_write, +}; + +/* /dev/oprofile/0/user file ops. */ + +static ssize_t hwsampler_user_read(struct file *file, char __user *buf, + size_t count, loff_t *offset) +{ + return oprofilefs_ulong_to_user(counter_config.user, + buf, count, offset); +} + +static ssize_t hwsampler_user_write(struct file *file, char const __user *buf, + size_t count, loff_t *offset) +{ + unsigned long val; + int retval; + + if (*offset) + return -EINVAL; + + retval = oprofilefs_ulong_from_user(&val, buf, count); + if (retval) + return retval; + + if (val != 0 && val != 1) + return -EINVAL; + + counter_config.user = val; + + return count; +} + +static const struct file_operations user_fops = { + .read = hwsampler_user_read, + .write = hwsampler_user_write, +}; + + +/* + * File ops used for: /dev/oprofile/timer/enabled + * The value always has to be the inverted value of hwsampler_enabled. So + * no separate variable is created. That way we do not need locking. + */ + +static ssize_t timer_enabled_read(struct file *file, char __user *buf, + size_t count, loff_t *offset) +{ + return oprofilefs_ulong_to_user(!hwsampler_enabled, buf, count, offset); +} + +static ssize_t timer_enabled_write(struct file *file, char const __user *buf, + size_t count, loff_t *offset) +{ + unsigned long val; + int retval; + + if (*offset) + return -EINVAL; + + retval = oprofilefs_ulong_from_user(&val, buf, count); + if (retval) + return retval; + + if (val != 0 && val != 1) + return -EINVAL; + + /* Timer cannot be disabled without having hardware sampling. */ + if (val == 0 && !hwsampler_available) + return -EINVAL; + + if (oprofile_started) + /* + * save to do without locking as we set + * hwsampler_running in start() when start_mutex is + * held + */ + return -EBUSY; + + hwsampler_enabled = !val; + + return count; +} + +static const struct file_operations timer_enabled_fops = { + .read = timer_enabled_read, + .write = timer_enabled_write, +}; + + static int oprofile_create_hwsampling_files(struct super_block *sb, - struct dentry *root) + struct dentry *root) { - struct dentry *hw_dir; + struct dentry *dir; + + dir = oprofilefs_mkdir(sb, root, "timer"); + if (!dir) + return -EINVAL; + + oprofilefs_create_file(sb, dir, "enabled", &timer_enabled_fops); + + if (!hwsampler_available) + return 0; /* reinitialize default values */ - hwsampler_file = 1; + hwsampler_enabled = 1; + counter_config.kernel = 1; + counter_config.user = 1; - hw_dir = oprofilefs_mkdir(sb, root, "hwsampling"); - if (!hw_dir) - return -EINVAL; + if (!force_cpu_type) { + /* + * Create the counter file system. A single virtual + * counter is created which can be used to + * enable/disable hardware sampling dynamically from + * user space. The user space will configure a single + * counter with a single event. The value of 'event' + * and 'unit_mask' are not evaluated by the kernel code + * and can only be set to 0. + */ + + dir = oprofilefs_mkdir(sb, root, "0"); + if (!dir) + return -EINVAL; - oprofilefs_create_file(sb, hw_dir, "hwsampler", &hwsampler_fops); - oprofilefs_create_ulong(sb, hw_dir, "hw_interval", - &oprofile_hw_interval); - oprofilefs_create_ro_ulong(sb, hw_dir, "hw_min_interval", - &oprofile_min_interval); - oprofilefs_create_ro_ulong(sb, hw_dir, "hw_max_interval", - &oprofile_max_interval); - oprofilefs_create_ulong(sb, hw_dir, "hw_sdbt_blocks", - &oprofile_sdbt_blocks); + oprofilefs_create_file(sb, dir, "enabled", &hwsampler_fops); + oprofilefs_create_file(sb, dir, "event", &zero_fops); + oprofilefs_create_file(sb, dir, "count", &hw_interval_fops); + oprofilefs_create_file(sb, dir, "unit_mask", &zero_fops); + oprofilefs_create_file(sb, dir, "kernel", &kernel_fops); + oprofilefs_create_file(sb, dir, "user", &user_fops); + oprofilefs_create_ulong(sb, dir, "hw_sdbt_blocks", + &oprofile_sdbt_blocks); + } else { + /* + * Hardware sampling can be used but the cpu_type is + * forced to timer in order to deal with legacy user + * space tools. The /dev/oprofile/hwsampling fs is + * provided in that case. + */ + dir = oprofilefs_mkdir(sb, root, "hwsampling"); + if (!dir) + return -EINVAL; + + oprofilefs_create_file(sb, dir, "hwsampler", + &hwsampler_fops); + oprofilefs_create_file(sb, dir, "hw_interval", + &hw_interval_fops); + oprofilefs_create_ro_ulong(sb, dir, "hw_min_interval", + &oprofile_min_interval); + oprofilefs_create_ro_ulong(sb, dir, "hw_max_interval", + &oprofile_max_interval); + oprofilefs_create_ulong(sb, dir, "hw_sdbt_blocks", + &oprofile_sdbt_blocks); + } return 0; } static int oprofile_hwsampler_init(struct oprofile_operations *ops) { + /* + * Initialize the timer mode infrastructure as well in order + * to be able to switch back dynamically. oprofile_timer_init + * is not supposed to fail. + */ + if (oprofile_timer_init(ops)) + BUG(); + + memcpy(&timer_ops, ops, sizeof(timer_ops)); + ops->create_files = oprofile_create_hwsampling_files; + + /* + * If the user space tools do not support newer cpu types, + * the force_cpu_type module parameter + * can be used to always return \"timer\" as cpu type. + */ + if (force_cpu_type != timer) { + struct cpuid id; + + get_cpu_id (&id); + + switch (id.machine) { + case 0x2097: case 0x2098: ops->cpu_type = "s390/z10"; break; + case 0x2817: case 0x2818: ops->cpu_type = "s390/z196"; break; + default: return -ENODEV; + } + } + if (hwsampler_setup()) return -ENODEV; /* - * create hwsampler files only if hwsampler_setup() succeeds. + * Query the range for the sampling interval from the + * hardware. */ oprofile_min_interval = hwsampler_query_min_interval(); if (oprofile_min_interval == 0) @@ -155,23 +466,17 @@ static int oprofile_hwsampler_init(struct oprofile_operations *ops) if (oprofile_hw_interval > oprofile_max_interval) oprofile_hw_interval = oprofile_max_interval; - if (oprofile_timer_init(ops)) - return -ENODEV; - - printk(KERN_INFO "oprofile: using hardware sampling\n"); - - memcpy(&timer_ops, ops, sizeof(timer_ops)); + printk(KERN_INFO "oprofile: System z hardware sampling " + "facility found.\n"); ops->start = oprofile_hwsampler_start; ops->stop = oprofile_hwsampler_stop; - ops->create_files = oprofile_create_hwsampling_files; return 0; } static void oprofile_hwsampler_exit(void) { - oprofile_timer_exit(); hwsampler_shutdown(); } @@ -182,7 +487,15 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) ops->backtrace = s390_backtrace; #ifdef CONFIG_64BIT - return oprofile_hwsampler_init(ops); + + /* + * -ENODEV is not reported to the caller. The module itself + * will use the timer mode sampling as fallback and this is + * always available. + */ + hwsampler_available = oprofile_hwsampler_init(ops) == 0; + + return 0; #else return -ENODEV; #endif diff --git a/arch/s390/oprofile/op_counter.h b/arch/s390/oprofile/op_counter.h new file mode 100644 index 000000000000..1a8d3ca09014 --- /dev/null +++ b/arch/s390/oprofile/op_counter.h @@ -0,0 +1,23 @@ +/** + * arch/s390/oprofile/op_counter.h + * + * Copyright (C) 2011 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Andreas Krebbel (krebbel@linux.vnet.ibm.com) + * + * @remark Copyright 2011 OProfile authors + */ + +#ifndef OP_COUNTER_H +#define OP_COUNTER_H + +struct op_counter_config { + /* `enabled' maps to the hwsampler_file variable. */ + /* `count' maps to the oprofile_hw_interval variable. */ + /* `event' and `unit_mask' are unused. */ + unsigned long kernel; + unsigned long user; +}; + +extern struct op_counter_config counter_config; + +#endif /* OP_COUNTER_H */ diff --git a/arch/score/Kconfig b/arch/score/Kconfig index df169e84db4e..4b285779ac05 100644 --- a/arch/score/Kconfig +++ b/arch/score/Kconfig @@ -4,6 +4,11 @@ config SCORE def_bool y select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW + select GENERIC_IOMAP + select HAVE_MEMBLOCK + select HAVE_MEMBLOCK_NODE_MAP + select ARCH_DISCARD_MEMBLOCK + select GENERIC_CPU_DEVICES choice prompt "System type" @@ -33,9 +38,6 @@ endmenu config CPU_SCORE7 bool -config GENERIC_IOMAP - def_bool y - config NO_DMA bool default y @@ -60,9 +62,6 @@ config 32BIT config ARCH_FLATMEM_ENABLE def_bool y -config ARCH_POPULATES_NODE_MAP - def_bool y - source "mm/Kconfig" config MEMORY_START diff --git a/arch/score/kernel/setup.c b/arch/score/kernel/setup.c index 6f898c057878..b48459afefdd 100644 --- a/arch/score/kernel/setup.c +++ b/arch/score/kernel/setup.c @@ -26,6 +26,7 @@ #include <linux/bootmem.h> #include <linux/initrd.h> #include <linux/ioport.h> +#include <linux/memblock.h> #include <linux/mm.h> #include <linux/seq_file.h> #include <linux/screen_info.h> @@ -54,7 +55,8 @@ static void __init bootmem_init(void) /* Initialize the boot-time allocator with low memory only. */ bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn, min_low_pfn, max_low_pfn); - add_active_range(0, min_low_pfn, max_low_pfn); + memblock_add_node(PFN_PHYS(min_low_pfn), + PFN_PHYS(max_low_pfn - min_low_pfn), 0); free_bootmem(PFN_PHYS(start_pfn), (max_low_pfn - start_pfn) << PAGE_SHIFT); diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 5629e2099130..3c8db65c89e5 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -4,6 +4,7 @@ config SUPERH select CLKDEV_LOOKUP select HAVE_IDE if HAS_IOPORT select HAVE_MEMBLOCK + select HAVE_MEMBLOCK_NODE_MAP select HAVE_OPROFILE select HAVE_GENERIC_DMA_COHERENT select HAVE_ARCH_TRACEHOOK @@ -84,9 +85,6 @@ config GENERIC_GPIO config GENERIC_CALIBRATE_DELAY bool -config GENERIC_IOMAP - bool - config GENERIC_CLOCKEVENTS def_bool y @@ -860,6 +858,7 @@ config PCI bool "PCI support" depends on SYS_SUPPORTS_PCI select PCI_DOMAINS + select GENERIC_PCI_IOMAP help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index ec8c84c14b17..895e337c79b6 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c @@ -50,9 +50,9 @@ static struct platform_device heartbeat_device = { #define GBECONT 0xffc10100 #define GBECONT_RMII1 BIT(17) #define GBECONT_RMII0 BIT(16) -static void sh7757_eth_set_mdio_gate(unsigned long addr) +static void sh7757_eth_set_mdio_gate(void *addr) { - if ((addr & 0x00000fff) < 0x0800) + if (((unsigned long)addr & 0x00000fff) < 0x0800) writel(readl(GBECONT) | GBECONT_RMII0, GBECONT); else writel(readl(GBECONT) | GBECONT_RMII1, GBECONT); @@ -116,9 +116,9 @@ static struct platform_device sh7757_eth1_device = { }, }; -static void sh7757_eth_giga_set_mdio_gate(unsigned long addr) +static void sh7757_eth_giga_set_mdio_gate(void *addr) { - if ((addr & 0x00000fff) < 0x0800) { + if (((unsigned long)addr & 0x00000fff) < 0x0800) { gpio_set_value(GPIO_PTT4, 1); writel(readl(GBECONT) & ~GBECONT_RMII0, GBECONT); } else { @@ -210,8 +210,12 @@ static struct resource sh_mmcif_resources[] = { }; static struct sh_mmcif_dma sh7757lcr_mmcif_dma = { - .chan_priv_tx = SHDMA_SLAVE_MMCIF_TX, - .chan_priv_rx = SHDMA_SLAVE_MMCIF_RX, + .chan_priv_tx = { + .slave_id = SHDMA_SLAVE_MMCIF_TX, + }, + .chan_priv_rx = { + .slave_id = SHDMA_SLAVE_MMCIF_RX, + } }; static struct sh_mmcif_plat_data sh_mmcif_plat = { diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c index 83cc704770d7..b1cb2715ad6e 100644 --- a/arch/sh/drivers/dma/dma-sysfs.c +++ b/arch/sh/drivers/dma/dma-sysfs.c @@ -12,18 +12,19 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/stat.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/platform_device.h> #include <linux/err.h> #include <linux/string.h> #include <asm/dma.h> -static struct sysdev_class dma_sysclass = { +static struct bus_type dma_subsys = { .name = "dma", + .dev_name = "dma", }; -static ssize_t dma_show_devices(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t dma_show_devices(struct device *dev, + struct device_attribute *attr, char *buf) { ssize_t len = 0; int i; @@ -43,29 +44,29 @@ static ssize_t dma_show_devices(struct sys_device *dev, return len; } -static SYSDEV_ATTR(devices, S_IRUGO, dma_show_devices, NULL); +static DEVICE_ATTR(devices, S_IRUGO, dma_show_devices, NULL); -static int __init dma_sysclass_init(void) +static int __init dma_subsys_init(void) { int ret; - ret = sysdev_class_register(&dma_sysclass); + ret = subsys_system_register(&dma_subsys, NULL); if (unlikely(ret)) return ret; - return sysfs_create_file(&dma_sysclass.kset.kobj, &attr_devices.attr); + return device_create_file(dma_subsys.dev_root, &dev_attr_devices.attr); } -postcore_initcall(dma_sysclass_init); +postcore_initcall(dma_subsys_init); -static ssize_t dma_show_dev_id(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t dma_show_dev_id(struct device *dev, + struct device_attribute *attr, char *buf) { struct dma_channel *channel = to_dma_channel(dev); return sprintf(buf, "%s\n", channel->dev_id); } -static ssize_t dma_store_dev_id(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t dma_store_dev_id(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { struct dma_channel *channel = to_dma_channel(dev); @@ -73,10 +74,10 @@ static ssize_t dma_store_dev_id(struct sys_device *dev, return count; } -static SYSDEV_ATTR(dev_id, S_IRUGO | S_IWUSR, dma_show_dev_id, dma_store_dev_id); +static DEVICE_ATTR(dev_id, S_IRUGO | S_IWUSR, dma_show_dev_id, dma_store_dev_id); -static ssize_t dma_store_config(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t dma_store_config(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { struct dma_channel *channel = to_dma_channel(dev); @@ -88,17 +89,17 @@ static ssize_t dma_store_config(struct sys_device *dev, return count; } -static SYSDEV_ATTR(config, S_IWUSR, NULL, dma_store_config); +static DEVICE_ATTR(config, S_IWUSR, NULL, dma_store_config); -static ssize_t dma_show_mode(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t dma_show_mode(struct device *dev, + struct device_attribute *attr, char *buf) { struct dma_channel *channel = to_dma_channel(dev); return sprintf(buf, "0x%08x\n", channel->mode); } -static ssize_t dma_store_mode(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t dma_store_mode(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { struct dma_channel *channel = to_dma_channel(dev); @@ -106,38 +107,38 @@ static ssize_t dma_store_mode(struct sys_device *dev, return count; } -static SYSDEV_ATTR(mode, S_IRUGO | S_IWUSR, dma_show_mode, dma_store_mode); +static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, dma_show_mode, dma_store_mode); #define dma_ro_attr(field, fmt) \ -static ssize_t dma_show_##field(struct sys_device *dev, \ - struct sysdev_attribute *attr, char *buf)\ +static ssize_t dma_show_##field(struct device *dev, \ + struct device_attribute *attr, char *buf)\ { \ struct dma_channel *channel = to_dma_channel(dev); \ return sprintf(buf, fmt, channel->field); \ } \ -static SYSDEV_ATTR(field, S_IRUGO, dma_show_##field, NULL); +static DEVICE_ATTR(field, S_IRUGO, dma_show_##field, NULL); dma_ro_attr(count, "0x%08x\n"); dma_ro_attr(flags, "0x%08lx\n"); int dma_create_sysfs_files(struct dma_channel *chan, struct dma_info *info) { - struct sys_device *dev = &chan->dev; + struct device *dev = &chan->dev; char name[16]; int ret; dev->id = chan->vchan; - dev->cls = &dma_sysclass; + dev->bus = &dma_subsys; - ret = sysdev_register(dev); + ret = device_register(dev); if (ret) return ret; - ret |= sysdev_create_file(dev, &attr_dev_id); - ret |= sysdev_create_file(dev, &attr_count); - ret |= sysdev_create_file(dev, &attr_mode); - ret |= sysdev_create_file(dev, &attr_flags); - ret |= sysdev_create_file(dev, &attr_config); + ret |= device_create_file(dev, &dev_attr_dev_id); + ret |= device_create_file(dev, &dev_attr_count); + ret |= device_create_file(dev, &dev_attr_mode); + ret |= device_create_file(dev, &dev_attr_flags); + ret |= device_create_file(dev, &dev_attr_config); if (unlikely(ret)) { dev_err(&info->pdev->dev, "Failed creating attrs\n"); @@ -150,17 +151,17 @@ int dma_create_sysfs_files(struct dma_channel *chan, struct dma_info *info) void dma_remove_sysfs_files(struct dma_channel *chan, struct dma_info *info) { - struct sys_device *dev = &chan->dev; + struct device *dev = &chan->dev; char name[16]; - sysdev_remove_file(dev, &attr_dev_id); - sysdev_remove_file(dev, &attr_count); - sysdev_remove_file(dev, &attr_mode); - sysdev_remove_file(dev, &attr_flags); - sysdev_remove_file(dev, &attr_config); + device_remove_file(dev, &dev_attr_dev_id); + device_remove_file(dev, &dev_attr_count); + device_remove_file(dev, &dev_attr_mode); + device_remove_file(dev, &dev_attr_flags); + device_remove_file(dev, &dev_attr_config); snprintf(name, sizeof(name), "dma%d", chan->chan); sysfs_remove_link(&info->pdev->dev.kobj, name); - sysdev_unregister(dev); + device_unregister(dev); } diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index c2691afe8f79..8f18dd090a66 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -36,9 +36,15 @@ static void __devinit pcibios_scanbus(struct pci_channel *hose) { static int next_busno; static int need_domain_info; + LIST_HEAD(resources); + int i; struct pci_bus *bus; - bus = pci_scan_bus(next_busno, hose->pci_ops, hose); + for (i = 0; i < hose->nr_resources; i++) + pci_add_resource(&resources, hose->resources + i); + + bus = pci_scan_root_bus(NULL, next_busno, hose->pci_ops, hose, + &resources); hose->bus = bus; need_domain_info = need_domain_info || hose->index; @@ -55,6 +61,8 @@ static void __devinit pcibios_scanbus(struct pci_channel *hose) pci_bus_size_bridges(bus); pci_bus_assign_resources(bus); pci_enable_bridges(bus); + } else { + pci_free_resource_list(&resources); } } @@ -162,16 +170,8 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev, */ void __devinit pcibios_fixup_bus(struct pci_bus *bus) { - struct pci_dev *dev = bus->self; + struct pci_dev *dev; struct list_head *ln; - struct pci_channel *hose = bus->sysdata; - - if (!dev) { - int i; - - for (i = 0; i < hose->nr_resources; i++) - bus->resource[i] = hose->resources + i; - } for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { dev = pci_dev_b(ln); @@ -243,27 +243,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) return pci_enable_resources(dev, mask); } -/* - * If we set up a device for bus mastering, we need to check and set - * the latency timer as it may not be properly set. - */ -static unsigned int pcibios_max_latency = 255; - -void pcibios_set_master(struct pci_dev *dev) -{ - u8 lat; - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - else - return; - printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", - pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} - void __init pcibios_update_irq(struct pci_dev *dev, int irq) { pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); @@ -393,29 +372,6 @@ static void __iomem *ioport_map_pci(struct pci_dev *dev, return (void __iomem *)(chan->io_map_base + port); } -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (unlikely(!len || !start)) - return NULL; - if (maxlen && len > maxlen) - len = maxlen; - - if (flags & IORESOURCE_IO) - return ioport_map_pci(dev, start, len); - if (flags & IORESOURCE_MEM) { - if (flags & IORESOURCE_CACHEABLE) - return ioremap(start, len); - return ioremap_nocache(start, len); - } - - return NULL; -} -EXPORT_SYMBOL(pci_iomap); - void pci_iounmap(struct pci_dev *dev, void __iomem *addr) { iounmap(addr); diff --git a/arch/sh/include/asm/dma.h b/arch/sh/include/asm/dma.h index 07373a074090..6aa2080c0065 100644 --- a/arch/sh/include/asm/dma.h +++ b/arch/sh/include/asm/dma.h @@ -14,7 +14,7 @@ #include <linux/spinlock.h> #include <linux/wait.h> #include <linux/sched.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <cpu/dma.h> #include <asm-generic/dma.h> @@ -91,7 +91,7 @@ struct dma_channel { wait_queue_head_t wait_queue; - struct sys_device dev; + struct device dev; void *priv_data; }; diff --git a/arch/sh/include/asm/memblock.h b/arch/sh/include/asm/memblock.h deleted file mode 100644 index e87063fad2ea..000000000000 --- a/arch/sh/include/asm/memblock.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASM_SH_MEMBLOCK_H -#define __ASM_SH_MEMBLOCK_H - -#endif /* __ASM_SH_MEMBLOCK_H */ diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h index ea2d5089de1e..20ee40af16e9 100644 --- a/arch/sh/include/asm/thread_info.h +++ b/arch/sh/include/asm/thread_info.h @@ -122,7 +122,6 @@ extern void init_thread_xstate(void); #define TIF_SYSCALL_TRACEPOINT 8 /* for ftrace syscall instrumentation */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ -#define TIF_FREEZE 19 /* Freezing for suspend */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) @@ -133,7 +132,6 @@ extern void init_thread_xstate(void); #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) -#define _TIF_FREEZE (1 << TIF_FREEZE) /* * _TIF_ALLWORK_MASK and _TIF_WORK_MASK need to fit within 2 bytes, or we diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index f0907995b4c9..a8140f0bbf6c 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/cpu.h> #include <linux/bitmap.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/slab.h> @@ -337,9 +337,9 @@ static struct kobj_type ktype_percpu_entry = { .default_attrs = sq_sysfs_attrs, }; -static int __devinit sq_sysdev_add(struct sys_device *sysdev) +static int __devinit sq_dev_add(struct device *dev) { - unsigned int cpu = sysdev->id; + unsigned int cpu = dev->id; struct kobject *kobj; int error; @@ -348,25 +348,27 @@ static int __devinit sq_sysdev_add(struct sys_device *sysdev) return -ENOMEM; kobj = sq_kobject[cpu]; - error = kobject_init_and_add(kobj, &ktype_percpu_entry, &sysdev->kobj, + error = kobject_init_and_add(kobj, &ktype_percpu_entry, &dev->kobj, "%s", "sq"); if (!error) kobject_uevent(kobj, KOBJ_ADD); return error; } -static int __devexit sq_sysdev_remove(struct sys_device *sysdev) +static int __devexit sq_dev_remove(struct device *dev) { - unsigned int cpu = sysdev->id; + unsigned int cpu = dev->id; struct kobject *kobj = sq_kobject[cpu]; kobject_put(kobj); return 0; } -static struct sysdev_driver sq_sysdev_driver = { - .add = sq_sysdev_add, - .remove = __devexit_p(sq_sysdev_remove), +static struct subsys_interface sq_interface = { + .name = "sq" + .subsys = &cpu_subsys, + .add_dev = sq_dev_add, + .remove_dev = __devexit_p(sq_dev_remove), }; static int __init sq_api_init(void) @@ -386,7 +388,7 @@ static int __init sq_api_init(void) if (unlikely(!sq_bitmap)) goto out; - ret = sysdev_driver_register(&cpu_sysdev_class, &sq_sysdev_driver); + ret = subsys_interface_register(&sq_interface); if (unlikely(ret != 0)) goto out; @@ -401,7 +403,7 @@ out: static void __exit sq_api_exit(void) { - sysdev_driver_unregister(&cpu_sysdev_class, &sq_sysdev_driver); + subsys_interface_unregister(&sq_interface); kfree(sq_bitmap); kmem_cache_destroy(sq_cache); } diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c index db4ecd731a00..406508d4ce74 100644 --- a/arch/sh/kernel/idle.c +++ b/arch/sh/kernel/idle.c @@ -89,7 +89,8 @@ void cpu_idle(void) /* endless idle loop with no priority at all */ while (1) { - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); + rcu_idle_enter(); while (!need_resched()) { check_pgt_cache(); @@ -111,7 +112,8 @@ void cpu_idle(void) start_critical_timings(); } - tick_nohz_restart_sched_tick(); + rcu_idle_exit(); + tick_nohz_idle_exit(); preempt_enable_no_resched(); schedule(); preempt_disable(); diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c index c5a33f007f88..9fea49f6e667 100644 --- a/arch/sh/kernel/machine_kexec.c +++ b/arch/sh/kernel/machine_kexec.c @@ -157,9 +157,6 @@ void __init reserve_crashkernel(void) unsigned long long crash_size, crash_base; int ret; - /* this is necessary because of memblock_phys_mem_size() */ - memblock_analyze(); - ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(), &crash_size, &crash_base); if (ret == 0 && crash_size > 0) { diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 1a0e946679a4..7b57bf1dc855 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -230,7 +230,8 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn, pmb_bolt_mapping((unsigned long)__va(start), start, end - start, PAGE_KERNEL); - add_active_range(nid, start_pfn, end_pfn); + memblock_set_node(PFN_PHYS(start_pfn), + PFN_PHYS(end_pfn - start_pfn), nid); } void __init __weak plat_early_device_setup(void) diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index c3e61b366493..cb8f9920f4dd 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -143,9 +143,6 @@ config MAX_ACTIVE_REGIONS CPU_SUBTYPE_SH7785) default "1" -config ARCH_POPULATES_NODE_MAP - def_bool y - config ARCH_SELECT_MEMORY_MODEL def_bool y diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 939ca0f356f6..82cc576fab15 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -324,7 +324,6 @@ void __init paging_init(void) unsigned long vaddr, end; int nid; - memblock_init(); sh_mv.mv_mem_init(); early_reserve_mem(); @@ -337,7 +336,7 @@ void __init paging_init(void) sh_mv.mv_mem_reserve(); memblock_enforce_memory_limit(memory_limit); - memblock_analyze(); + memblock_allow_resize(); memblock_dump_all(); diff --git a/arch/sh/oprofile/common.c b/arch/sh/oprofile/common.c index b4c2d2b946dd..e4dd5d5a1115 100644 --- a/arch/sh/oprofile/common.c +++ b/arch/sh/oprofile/common.c @@ -49,7 +49,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) return oprofile_perf_init(ops); } -void __exit oprofile_arch_exit(void) +void oprofile_arch_exit(void) { oprofile_perf_exit(); kfree(sh_pmu_op_name); @@ -60,5 +60,5 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) ops->backtrace = sh_backtrace; return -ENODEV; } -void __exit oprofile_arch_exit(void) {} +void oprofile_arch_exit(void) {} #endif /* CONFIG_HW_PERF_EVENTS */ diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index f92602e86607..96657992a72e 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -28,9 +28,11 @@ config SPARC select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW select USE_GENERIC_SMP_HELPERS if SMP + select GENERIC_PCI_IOMAP config SPARC32 def_bool !64BIT + select GENERIC_ATOMIC64 config SPARC64 def_bool 64BIT @@ -43,6 +45,7 @@ config SPARC64 select HAVE_KPROBES select HAVE_RCU_TABLE_FREE if SMP select HAVE_MEMBLOCK + select HAVE_MEMBLOCK_NODE_MAP select HAVE_SYSCALL_WRAPPERS select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE_MCOUNT_RECORD @@ -352,9 +355,6 @@ config NODES_SPAN_OTHER_NODES def_bool y depends on NEED_MULTIPLE_NODES -config ARCH_POPULATES_NODE_MAP - def_bool y if SPARC64 - config ARCH_SELECT_MEMORY_MODEL def_bool y if SPARC64 @@ -385,9 +385,7 @@ config SCHED_MC making when dealing with multi-core CPU chips at a cost of slightly increased overhead in some places. If unsure say N here. -if SPARC64 source "kernel/Kconfig.preempt" -endif config CMDLINE_BOOL bool "Default bootloader kernel arguments" diff --git a/arch/sparc/include/asm/atomic_32.h b/arch/sparc/include/asm/atomic_32.h index 5c3c8b69884d..9dd0a769fa18 100644 --- a/arch/sparc/include/asm/atomic_32.h +++ b/arch/sparc/include/asm/atomic_32.h @@ -13,7 +13,7 @@ #include <linux/types.h> -#ifdef __KERNEL__ +#include <asm-generic/atomic64.h> #include <asm/system.h> @@ -52,112 +52,10 @@ extern void atomic_set(atomic_t *, int); #define atomic_dec_and_test(v) (atomic_dec_return(v) == 0) #define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0) - -/* This is the old 24-bit implementation. It's still used internally - * by some sparc-specific code, notably the semaphore implementation. - */ -typedef struct { volatile int counter; } atomic24_t; - -#ifndef CONFIG_SMP - -#define ATOMIC24_INIT(i) { (i) } -#define atomic24_read(v) ((v)->counter) -#define atomic24_set(v, i) (((v)->counter) = i) - -#else -/* We do the bulk of the actual work out of line in two common - * routines in assembler, see arch/sparc/lib/atomic.S for the - * "fun" details. - * - * For SMP the trick is you embed the spin lock byte within - * the word, use the low byte so signedness is easily retained - * via a quick arithmetic shift. It looks like this: - * - * ---------------------------------------- - * | signed 24-bit counter value | lock | atomic_t - * ---------------------------------------- - * 31 8 7 0 - */ - -#define ATOMIC24_INIT(i) { ((i) << 8) } - -static inline int atomic24_read(const atomic24_t *v) -{ - int ret = v->counter; - - while(ret & 0xff) - ret = v->counter; - - return ret >> 8; -} - -#define atomic24_set(v, i) (((v)->counter) = ((i) << 8)) -#endif - -static inline int __atomic24_add(int i, atomic24_t *v) -{ - register volatile int *ptr asm("g1"); - register int increment asm("g2"); - register int tmp1 asm("g3"); - register int tmp2 asm("g4"); - register int tmp3 asm("g7"); - - ptr = &v->counter; - increment = i; - - __asm__ __volatile__( - "mov %%o7, %%g4\n\t" - "call ___atomic24_add\n\t" - " add %%o7, 8, %%o7\n" - : "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3) - : "0" (increment), "r" (ptr) - : "memory", "cc"); - - return increment; -} - -static inline int __atomic24_sub(int i, atomic24_t *v) -{ - register volatile int *ptr asm("g1"); - register int increment asm("g2"); - register int tmp1 asm("g3"); - register int tmp2 asm("g4"); - register int tmp3 asm("g7"); - - ptr = &v->counter; - increment = i; - - __asm__ __volatile__( - "mov %%o7, %%g4\n\t" - "call ___atomic24_sub\n\t" - " add %%o7, 8, %%o7\n" - : "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3) - : "0" (increment), "r" (ptr) - : "memory", "cc"); - - return increment; -} - -#define atomic24_add(i, v) ((void)__atomic24_add((i), (v))) -#define atomic24_sub(i, v) ((void)__atomic24_sub((i), (v))) - -#define atomic24_dec_return(v) __atomic24_sub(1, (v)) -#define atomic24_inc_return(v) __atomic24_add(1, (v)) - -#define atomic24_sub_and_test(i, v) (__atomic24_sub((i), (v)) == 0) -#define atomic24_dec_and_test(v) (__atomic24_sub(1, (v)) == 0) - -#define atomic24_inc(v) ((void)__atomic24_add(1, (v))) -#define atomic24_dec(v) ((void)__atomic24_sub(1, (v))) - -#define atomic24_add_negative(i, v) (__atomic24_add((i), (v)) < 0) - /* Atomic operations are already serializing */ #define smp_mb__before_atomic_dec() barrier() #define smp_mb__after_atomic_dec() barrier() #define smp_mb__before_atomic_inc() barrier() #define smp_mb__after_atomic_inc() barrier() -#endif /* !(__KERNEL__) */ - #endif /* !(__ARCH_SPARC_ATOMIC__) */ diff --git a/arch/sparc/include/asm/io_32.h b/arch/sparc/include/asm/io_32.h index c2ced21c9dc1..2006e5d359df 100644 --- a/arch/sparc/include/asm/io_32.h +++ b/arch/sparc/include/asm/io_32.h @@ -7,6 +7,7 @@ #include <asm/page.h> /* IO address mapping routines need this */ #include <asm/system.h> +#include <asm-generic/pci_iomap.h> #define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) @@ -324,7 +325,6 @@ extern void ioport_unmap(void __iomem *); /* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ struct pci_dev; -extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); extern void pci_iounmap(struct pci_dev *dev, void __iomem *); /* diff --git a/arch/sparc/include/asm/io_64.h b/arch/sparc/include/asm/io_64.h index 9c8965415f0a..9481e5a6fa90 100644 --- a/arch/sparc/include/asm/io_64.h +++ b/arch/sparc/include/asm/io_64.h @@ -8,6 +8,7 @@ #include <asm/page.h> /* IO address mapping routines need this */ #include <asm/system.h> #include <asm/asi.h> +#include <asm-generic/pci_iomap.h> /* PC crapola... */ #define __SLOW_DOWN_IO do { } while (0) @@ -514,7 +515,6 @@ extern void ioport_unmap(void __iomem *); /* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ struct pci_dev; -extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); extern void pci_iounmap(struct pci_dev *dev, void __iomem *); static inline int sbus_can_dma_64bit(void) diff --git a/arch/sparc/include/asm/memblock.h b/arch/sparc/include/asm/memblock.h deleted file mode 100644 index c67b047ef85e..000000000000 --- a/arch/sparc/include/asm/memblock.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _SPARC64_MEMBLOCK_H -#define _SPARC64_MEMBLOCK_H - -#include <asm/oplib.h> - -#define MEMBLOCK_DBG(fmt...) prom_printf(fmt) - -#endif /* !(_SPARC64_MEMBLOCK_H) */ diff --git a/arch/sparc/include/asm/page_32.h b/arch/sparc/include/asm/page_32.h index 156707b0f18d..bb5c2ac4055d 100644 --- a/arch/sparc/include/asm/page_32.h +++ b/arch/sparc/include/asm/page_32.h @@ -8,14 +8,10 @@ #ifndef _SPARC_PAGE_H #define _SPARC_PAGE_H -#define PAGE_SHIFT 12 +#include <linux/const.h> -#ifndef __ASSEMBLY__ -/* I have my suspicions... -DaveM */ -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#else -#define PAGE_SIZE (1 << PAGE_SHIFT) -#endif +#define PAGE_SHIFT 12 +#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) #include <asm/btfixup.h> diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h index 02939abd356c..6de7f7bf956a 100644 --- a/arch/sparc/include/asm/pci_32.h +++ b/arch/sparc/include/asm/pci_32.h @@ -16,11 +16,6 @@ #define PCI_IRQ_NONE 0xffffffff -static inline void pcibios_set_master(struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} - static inline void pcibios_penalize_isa_irq(int irq, int active) { /* We don't do dynamic PCI IRQ allocation */ diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h index 2614d96141c9..755a4bb6bcd3 100644 --- a/arch/sparc/include/asm/pci_64.h +++ b/arch/sparc/include/asm/pci_64.h @@ -16,11 +16,6 @@ #define PCI_IRQ_NONE 0xffffffff -static inline void pcibios_set_master(struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} - static inline void pcibios_penalize_isa_irq(int irq, int active) { /* We don't do dynamic PCI IRQ allocation */ diff --git a/arch/sparc/include/asm/pgtsun4.h b/arch/sparc/include/asm/pgtsun4.h deleted file mode 100644 index 5a0d661fb82e..000000000000 --- a/arch/sparc/include/asm/pgtsun4.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * pgtsun4.h: Sun4 specific pgtable.h defines and code. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) - */ -#ifndef _SPARC_PGTSUN4C_H -#define _SPARC_PGTSUN4C_H - -#include <asm/contregs.h> - -/* PMD_SHIFT determines the size of the area a second-level page table can map */ -#define SUN4C_PMD_SHIFT 23 - -/* PGDIR_SHIFT determines what a third-level page table entry can map */ -#define SUN4C_PGDIR_SHIFT 23 -#define SUN4C_PGDIR_SIZE (1UL << SUN4C_PGDIR_SHIFT) -#define SUN4C_PGDIR_MASK (~(SUN4C_PGDIR_SIZE-1)) -#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK) - -/* To represent how the sun4c mmu really lays things out. */ -#define SUN4C_REAL_PGDIR_SHIFT 18 -#define SUN4C_REAL_PGDIR_SIZE (1UL << SUN4C_REAL_PGDIR_SHIFT) -#define SUN4C_REAL_PGDIR_MASK (~(SUN4C_REAL_PGDIR_SIZE-1)) -#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK) - -/* 19 bit PFN on sun4 */ -#define SUN4C_PFN_MASK 0x7ffff - -/* Don't increase these unless the structures in sun4c.c are fixed */ -#define SUN4C_MAX_SEGMAPS 256 -#define SUN4C_MAX_CONTEXTS 16 - -/* - * To be efficient, and not have to worry about allocating such - * a huge pgd, we make the kernel sun4c tables each hold 1024 - * entries and the pgd similarly just like the i386 tables. - */ -#define SUN4C_PTRS_PER_PTE 1024 -#define SUN4C_PTRS_PER_PMD 1 -#define SUN4C_PTRS_PER_PGD 1024 - -/* - * Sparc SUN4C pte fields. - */ -#define _SUN4C_PAGE_VALID 0x80000000 -#define _SUN4C_PAGE_SILENT_READ 0x80000000 /* synonym */ -#define _SUN4C_PAGE_DIRTY 0x40000000 -#define _SUN4C_PAGE_SILENT_WRITE 0x40000000 /* synonym */ -#define _SUN4C_PAGE_PRIV 0x20000000 /* privileged page */ -#define _SUN4C_PAGE_NOCACHE 0x10000000 /* non-cacheable page */ -#define _SUN4C_PAGE_PRESENT 0x08000000 /* implemented in software */ -#define _SUN4C_PAGE_IO 0x04000000 /* I/O page */ -#define _SUN4C_PAGE_FILE 0x02000000 /* implemented in software */ -#define _SUN4C_PAGE_READ 0x00800000 /* implemented in software */ -#define _SUN4C_PAGE_WRITE 0x00400000 /* implemented in software */ -#define _SUN4C_PAGE_ACCESSED 0x00200000 /* implemented in software */ -#define _SUN4C_PAGE_MODIFIED 0x00100000 /* implemented in software */ - -#define _SUN4C_READABLE (_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\ - _SUN4C_PAGE_ACCESSED) -#define _SUN4C_WRITEABLE (_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\ - _SUN4C_PAGE_MODIFIED) - -#define _SUN4C_PAGE_CHG_MASK (0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED) - -#define SUN4C_PAGE_NONE __pgprot(_SUN4C_PAGE_PRESENT) -#define SUN4C_PAGE_SHARED __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\ - _SUN4C_PAGE_WRITE) -#define SUN4C_PAGE_COPY __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE) -#define SUN4C_PAGE_READONLY __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE) -#define SUN4C_PAGE_KERNEL __pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\ - _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV) - -/* SUN4C swap entry encoding - * - * We use 5 bits for the type and 19 for the offset. This gives us - * 32 swapfiles of 4GB each. Encoding looks like: - * - * RRRRRRRRooooooooooooooooooottttt - * fedcba9876543210fedcba9876543210 - * - * The top 8 bits are reserved for protection and status bits, especially - * FILE and PRESENT. - */ -#define SUN4C_SWP_TYPE_MASK 0x1f -#define SUN4C_SWP_OFF_MASK 0x7ffff -#define SUN4C_SWP_OFF_SHIFT 5 - -#ifndef __ASSEMBLY__ - -static inline unsigned long sun4c_get_synchronous_error(void) -{ - unsigned long sync_err; - - __asm__ __volatile__("lda [%1] %2, %0\n\t" : - "=r" (sync_err) : - "r" (AC_SYNC_ERR), "i" (ASI_CONTROL)); - return sync_err; -} - -static inline unsigned long sun4c_get_synchronous_address(void) -{ - unsigned long sync_addr; - - __asm__ __volatile__("lda [%1] %2, %0\n\t" : - "=r" (sync_addr) : - "r" (AC_SYNC_VA), "i" (ASI_CONTROL)); - return sync_addr; -} - -/* SUN4 pte, segmap, and context manipulation */ -static inline unsigned long sun4c_get_segmap(unsigned long addr) -{ - register unsigned long entry; - - __asm__ __volatile__("\n\tlduha [%1] %2, %0\n\t" : - "=r" (entry) : - "r" (addr), "i" (ASI_SEGMAP)); - return entry; -} - -static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry) -{ - __asm__ __volatile__("\n\tstha %1, [%0] %2; nop; nop; nop;\n\t" : : - "r" (addr), "r" (entry), - "i" (ASI_SEGMAP) - : "memory"); -} - -static inline unsigned long sun4c_get_pte(unsigned long addr) -{ - register unsigned long entry; - - __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : - "=r" (entry) : - "r" (addr), "i" (ASI_PTE)); - return entry; -} - -static inline void sun4c_put_pte(unsigned long addr, unsigned long entry) -{ - __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : : - "r" (addr), - "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE) - : "memory"); -} - -static inline int sun4c_get_context(void) -{ - register int ctx; - - __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" : - "=r" (ctx) : - "r" (AC_CONTEXT), "i" (ASI_CONTROL)); - - return ctx; -} - -static inline int sun4c_set_context(int ctx) -{ - __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : : - "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL) - : "memory"); - - return ctx; -} - -#endif /* !(__ASSEMBLY__) */ - -#endif /* !(_SPARC_PGTSUN4_H) */ diff --git a/arch/sparc/include/asm/posix_types.h b/arch/sparc/include/asm/posix_types.h index 98d6ebb922fb..dbfc1a34b3a2 100644 --- a/arch/sparc/include/asm/posix_types.h +++ b/arch/sparc/include/asm/posix_types.h @@ -20,7 +20,6 @@ typedef unsigned int __kernel_uid_t; typedef unsigned int __kernel_gid_t; typedef unsigned long __kernel_ino_t; typedef unsigned int __kernel_mode_t; -typedef unsigned short __kernel_umode_t; typedef unsigned int __kernel_nlink_t; typedef int __kernel_daddr_t; typedef long __kernel_off_t; @@ -55,7 +54,6 @@ typedef unsigned short __kernel_uid_t; typedef unsigned short __kernel_gid_t; typedef unsigned long __kernel_ino_t; typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_umode_t; typedef short __kernel_nlink_t; typedef long __kernel_daddr_t; typedef long __kernel_off_t; diff --git a/arch/sparc/include/asm/signal.h b/arch/sparc/include/asm/signal.h index e49b828a2471..aa42fe30d5b9 100644 --- a/arch/sparc/include/asm/signal.h +++ b/arch/sparc/include/asm/signal.h @@ -143,10 +143,11 @@ struct sigstack { #define SA_ONSTACK _SV_SSTACK #define SA_RESTART _SV_INTR #define SA_ONESHOT _SV_RESET -#define SA_NOMASK 0x20u +#define SA_NODEFER 0x20u #define SA_NOCLDWAIT 0x100u #define SA_SIGINFO 0x200u +#define SA_NOMASK SA_NODEFER #define SIG_BLOCK 0x01 /* for blocking signals */ #define SIG_UNBLOCK 0x02 /* for unblocking signals */ diff --git a/arch/sparc/include/asm/socket.h b/arch/sparc/include/asm/socket.h index 9d3fefcff2f5..8af1b64168b3 100644 --- a/arch/sparc/include/asm/socket.h +++ b/arch/sparc/include/asm/socket.h @@ -58,6 +58,9 @@ #define SO_RXQ_OVFL 0x0024 +#define SO_WIFI_STATUS 0x0025 +#define SCM_WIFI_STATUS SO_WIFI_STATUS + /* Security levels - as per NRL IPv6 - don't actually do anything */ #define SO_SECURITY_AUTHENTICATION 0x5001 #define SO_SECURITY_ENCRYPTION_TRANSPORT 0x5002 diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h index fa5753233410..c2a1080cdd3b 100644 --- a/arch/sparc/include/asm/thread_info_32.h +++ b/arch/sparc/include/asm/thread_info_32.h @@ -95,7 +95,7 @@ BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *) * Observe the order of get_free_pages() in alloc_thread_info_node(). * The sun4 has 8K stack too, because it's short on memory, and 16K is a waste. */ -#define THREAD_SIZE 8192 +#define THREAD_SIZE (2 * PAGE_SIZE) /* * Offsets in thread_info structure, used in assembly code @@ -133,7 +133,6 @@ BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *) #define TIF_POLLING_NRFLAG 9 /* true if poll_idle() is polling * TIF_NEED_RESCHED */ #define TIF_MEMDIE 10 /* is terminating due to OOM killer */ -#define TIF_FREEZE 11 /* is freezing for suspend */ /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) @@ -147,7 +146,6 @@ BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *) #define _TIF_DO_NOTIFY_RESUME_MASK (_TIF_NOTIFY_RESUME | \ _TIF_SIGPENDING | \ _TIF_RESTORE_SIGMASK) -#define _TIF_FREEZE (1<<TIF_FREEZE) #endif /* __KERNEL__ */ diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h index 60d86be1a533..01d057fe6a3f 100644 --- a/arch/sparc/include/asm/thread_info_64.h +++ b/arch/sparc/include/asm/thread_info_64.h @@ -225,7 +225,6 @@ register struct thread_info *current_thread_info_reg asm("g6"); /* flag bit 12 is available */ #define TIF_MEMDIE 13 /* is terminating due to OOM killer */ #define TIF_POLLING_NRFLAG 14 -#define TIF_FREEZE 15 /* is freezing for suspend */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) @@ -237,7 +236,6 @@ register struct thread_info *current_thread_info_reg asm("g6"); #define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT) #define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) -#define _TIF_FREEZE (1<<TIF_FREEZE) #define _TIF_USER_WORK_MASK ((0xff << TI_FLAG_WSAVED_SHIFT) | \ _TIF_DO_NOTIFY_RESUME_MASK | \ diff --git a/arch/sparc/include/asm/types.h b/arch/sparc/include/asm/types.h index 91e5a034f987..383d156cde9c 100644 --- a/arch/sparc/include/asm/types.h +++ b/arch/sparc/include/asm/types.h @@ -12,12 +12,6 @@ #include <asm-generic/int-ll64.h> -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - #endif /* defined(__sparc__) */ #endif /* defined(_SPARC_TYPES_H) */ diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c index 7429b47c3aca..381edcd5bc29 100644 --- a/arch/sparc/kernel/ds.c +++ b/arch/sparc/kernel/ds.c @@ -1181,13 +1181,11 @@ static int __devinit ds_probe(struct vio_dev *vdev, dp->rcv_buf_len = 4096; - dp->ds_states = kzalloc(sizeof(ds_states_template), - GFP_KERNEL); + dp->ds_states = kmemdup(ds_states_template, + sizeof(ds_states_template), GFP_KERNEL); if (!dp->ds_states) goto out_free_rcv_buf; - memcpy(dp->ds_states, ds_states_template, - sizeof(ds_states_template)); dp->num_ds_states = ARRAY_SIZE(ds_states_template); for (i = 0; i < dp->num_ds_states; i++) diff --git a/arch/sparc/kernel/leon_pci.c b/arch/sparc/kernel/leon_pci.c index f1cf6ef011a7..c7bec25fdb1c 100644 --- a/arch/sparc/kernel/leon_pci.c +++ b/arch/sparc/kernel/leon_pci.c @@ -19,22 +19,22 @@ */ void leon_pci_init(struct platform_device *ofdev, struct leon_pci_info *info) { + LIST_HEAD(resources); struct pci_bus *root_bus; - root_bus = pci_scan_bus_parented(&ofdev->dev, 0, info->ops, info); - if (root_bus) { - root_bus->resource[0] = &info->io_space; - root_bus->resource[1] = &info->mem_space; - root_bus->resource[2] = NULL; - - /* Init all PCI devices into PCI tree */ - pci_bus_add_devices(root_bus); + pci_add_resource(&resources, &info->io_space); + pci_add_resource(&resources, &info->mem_space); + root_bus = pci_scan_root_bus(&ofdev->dev, 0, info->ops, info, + &resources); + if (root_bus) { /* Setup IRQs of all devices using custom routines */ pci_fixup_irqs(pci_common_swizzle, info->map_irq); /* Assign devices with resources */ pci_assign_unassigned_resources(); + } else { + pci_free_resource_list(&resources); } } @@ -83,15 +83,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *pbus) int i, has_io, has_mem; u16 cmd; - /* Generic PCI bus probing sets these to point at - * &io{port,mem}_resouce which is wrong for us. - */ - if (pbus->self == NULL) { - pbus->resource[0] = &info->io_space; - pbus->resource[1] = &info->mem_space; - pbus->resource[2] = NULL; - } - list_for_each_entry(dev, &pbus->devices, bus_list) { /* * We can not rely on that the bootloader has enabled I/O diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index 31111e35281e..bb8bc2e519ac 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -685,23 +685,25 @@ static void __devinit pci_bus_register_of_sysfs(struct pci_bus *bus) struct pci_bus * __devinit pci_scan_one_pbm(struct pci_pbm_info *pbm, struct device *parent) { + LIST_HEAD(resources); struct device_node *node = pbm->op->dev.of_node; struct pci_bus *bus; printk("PCI: Scanning PBM %s\n", node->full_name); - bus = pci_create_bus(parent, pbm->pci_first_busno, pbm->pci_ops, pbm); + pci_add_resource(&resources, &pbm->io_space); + pci_add_resource(&resources, &pbm->mem_space); + bus = pci_create_root_bus(parent, pbm->pci_first_busno, pbm->pci_ops, + pbm, &resources); if (!bus) { printk(KERN_ERR "Failed to create bus for %s\n", node->full_name); + pci_free_resource_list(&resources); return NULL; } bus->secondary = pbm->pci_first_busno; bus->subordinate = pbm->pci_last_busno; - bus->resource[0] = &pbm->io_space; - bus->resource[1] = &pbm->mem_space; - pci_of_scan_bus(pbm, node, bus); pci_bus_add_devices(bus); pci_bus_register_of_sysfs(bus); @@ -711,13 +713,6 @@ struct pci_bus * __devinit pci_scan_one_pbm(struct pci_pbm_info *pbm, void __devinit pcibios_fixup_bus(struct pci_bus *pbus) { - struct pci_pbm_info *pbm = pbus->sysdata; - - /* Generic PCI bus probing sets these to point at - * &io{port,mem}_resouce which is wrong for us. - */ - pbus->resource[0] = &pbm->io_space; - pbus->resource[1] = &pbm->mem_space; } void pcibios_update_irq(struct pci_dev *pdev, int irq) @@ -1083,6 +1078,11 @@ void pci_resource_to_user(const struct pci_dev *pdev, int bar, *end = rp->end - offset; } +void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} + static int __init pcibios_init(void) { pci_dfl_cache_line_size = 64 >> 2; diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c index b272cda35a01..af5755d20fbe 100644 --- a/arch/sparc/kernel/pci_sun4v.c +++ b/arch/sparc/kernel/pci_sun4v.c @@ -849,10 +849,10 @@ static int pci_sun4v_msiq_build_irq(struct pci_pbm_info *pbm, if (!irq) return -ENOMEM; - if (pci_sun4v_msiq_setstate(pbm->devhandle, msiqid, HV_MSIQSTATE_IDLE)) - return -EINVAL; if (pci_sun4v_msiq_setvalid(pbm->devhandle, msiqid, HV_MSIQ_VALID)) return -EINVAL; + if (pci_sun4v_msiq_setstate(pbm->devhandle, msiqid, HV_MSIQSTATE_IDLE)) + return -EINVAL; return irq; } diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c index 3739a06a76cb..39d8b05201a2 100644 --- a/arch/sparc/kernel/process_64.c +++ b/arch/sparc/kernel/process_64.c @@ -95,12 +95,14 @@ void cpu_idle(void) set_thread_flag(TIF_POLLING_NRFLAG); while(1) { - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); + rcu_idle_enter(); while (!need_resched() && !cpu_is_offline(cpu)) sparc64_yield(cpu); - tick_nohz_restart_sched_tick(); + rcu_idle_exit(); + tick_nohz_idle_exit(); preempt_enable_no_resched(); diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c index 46614807a57f..741df916c124 100644 --- a/arch/sparc/kernel/prom_common.c +++ b/arch/sparc/kernel/prom_common.c @@ -58,12 +58,10 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len void *new_val; int err; - new_val = kmalloc(len, GFP_KERNEL); + new_val = kmemdup(val, len, GFP_KERNEL); if (!new_val) return -ENOMEM; - memcpy(new_val, val, len); - err = -ENODEV; mutex_lock(&of_set_property_mutex); diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c index fe1e3fc31bc5..ffb883ddd0f0 100644 --- a/arch/sparc/kernel/setup_32.c +++ b/arch/sparc/kernel/setup_32.c @@ -84,7 +84,7 @@ static void prom_sync_me(void) prom_printf("PROM SYNC COMMAND...\n"); show_free_areas(0); - if(current->pid != 0) { + if (!is_idle_task(current)) { local_irq_enable(); sys_sync(); local_irq_disable(); diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index 75607724d290..3b1bd7c50164 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -840,7 +840,7 @@ static void tsb_sync(void *info) struct trap_per_cpu *tp = &trap_block[raw_smp_processor_id()]; struct mm_struct *mm = info; - /* It is not valid to test "currrent->active_mm == mm" here. + /* It is not valid to test "current->active_mm == mm" here. * * The value of "current" is not changed atomically with * switch_mm(). But that's OK, we just need to check the diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c index 441521ad8a3f..232df9949530 100644 --- a/arch/sparc/kernel/sys_sparc_64.c +++ b/arch/sparc/kernel/sys_sparc_64.c @@ -368,11 +368,11 @@ static unsigned long mmap_rnd(void) if (current->flags & PF_RANDOMIZE) { unsigned long val = get_random_int(); if (test_thread_flag(TIF_32BIT)) - rnd = (val % (1UL << (22UL-PAGE_SHIFT))); + rnd = (val % (1UL << (23UL-PAGE_SHIFT))); else - rnd = (val % (1UL << (29UL-PAGE_SHIFT))); + rnd = (val % (1UL << (30UL-PAGE_SHIFT))); } - return (rnd << PAGE_SHIFT) * 2; + return rnd << PAGE_SHIFT; } void arch_pick_mmap_layout(struct mm_struct *mm) diff --git a/arch/sparc/kernel/sysfs.c b/arch/sparc/kernel/sysfs.c index 7408201d7efb..654e8aad3bbe 100644 --- a/arch/sparc/kernel/sysfs.c +++ b/arch/sparc/kernel/sysfs.c @@ -3,7 +3,7 @@ * Copyright (C) 2007 David S. Miller <davem@davemloft.net> */ #include <linux/sched.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/cpu.h> #include <linux/smp.h> #include <linux/percpu.h> @@ -16,13 +16,13 @@ static DEFINE_PER_CPU(struct hv_mmu_statistics, mmu_stats) __attribute__((aligned(64))); #define SHOW_MMUSTAT_ULONG(NAME) \ -static ssize_t show_##NAME(struct sys_device *dev, \ - struct sysdev_attribute *attr, char *buf) \ +static ssize_t show_##NAME(struct device *dev, \ + struct device_attribute *attr, char *buf) \ { \ struct hv_mmu_statistics *p = &per_cpu(mmu_stats, dev->id); \ return sprintf(buf, "%lu\n", p->NAME); \ } \ -static SYSDEV_ATTR(NAME, 0444, show_##NAME, NULL) +static DEVICE_ATTR(NAME, 0444, show_##NAME, NULL) SHOW_MMUSTAT_ULONG(immu_tsb_hits_ctx0_8k_tte); SHOW_MMUSTAT_ULONG(immu_tsb_ticks_ctx0_8k_tte); @@ -58,38 +58,38 @@ SHOW_MMUSTAT_ULONG(dmmu_tsb_hits_ctxnon0_256mb_tte); SHOW_MMUSTAT_ULONG(dmmu_tsb_ticks_ctxnon0_256mb_tte); static struct attribute *mmu_stat_attrs[] = { - &attr_immu_tsb_hits_ctx0_8k_tte.attr, - &attr_immu_tsb_ticks_ctx0_8k_tte.attr, - &attr_immu_tsb_hits_ctx0_64k_tte.attr, - &attr_immu_tsb_ticks_ctx0_64k_tte.attr, - &attr_immu_tsb_hits_ctx0_4mb_tte.attr, - &attr_immu_tsb_ticks_ctx0_4mb_tte.attr, - &attr_immu_tsb_hits_ctx0_256mb_tte.attr, - &attr_immu_tsb_ticks_ctx0_256mb_tte.attr, - &attr_immu_tsb_hits_ctxnon0_8k_tte.attr, - &attr_immu_tsb_ticks_ctxnon0_8k_tte.attr, - &attr_immu_tsb_hits_ctxnon0_64k_tte.attr, - &attr_immu_tsb_ticks_ctxnon0_64k_tte.attr, - &attr_immu_tsb_hits_ctxnon0_4mb_tte.attr, - &attr_immu_tsb_ticks_ctxnon0_4mb_tte.attr, - &attr_immu_tsb_hits_ctxnon0_256mb_tte.attr, - &attr_immu_tsb_ticks_ctxnon0_256mb_tte.attr, - &attr_dmmu_tsb_hits_ctx0_8k_tte.attr, - &attr_dmmu_tsb_ticks_ctx0_8k_tte.attr, - &attr_dmmu_tsb_hits_ctx0_64k_tte.attr, - &attr_dmmu_tsb_ticks_ctx0_64k_tte.attr, - &attr_dmmu_tsb_hits_ctx0_4mb_tte.attr, - &attr_dmmu_tsb_ticks_ctx0_4mb_tte.attr, - &attr_dmmu_tsb_hits_ctx0_256mb_tte.attr, - &attr_dmmu_tsb_ticks_ctx0_256mb_tte.attr, - &attr_dmmu_tsb_hits_ctxnon0_8k_tte.attr, - &attr_dmmu_tsb_ticks_ctxnon0_8k_tte.attr, - &attr_dmmu_tsb_hits_ctxnon0_64k_tte.attr, - &attr_dmmu_tsb_ticks_ctxnon0_64k_tte.attr, - &attr_dmmu_tsb_hits_ctxnon0_4mb_tte.attr, - &attr_dmmu_tsb_ticks_ctxnon0_4mb_tte.attr, - &attr_dmmu_tsb_hits_ctxnon0_256mb_tte.attr, - &attr_dmmu_tsb_ticks_ctxnon0_256mb_tte.attr, + &dev_attr_immu_tsb_hits_ctx0_8k_tte.attr, + &dev_attr_immu_tsb_ticks_ctx0_8k_tte.attr, + &dev_attr_immu_tsb_hits_ctx0_64k_tte.attr, + &dev_attr_immu_tsb_ticks_ctx0_64k_tte.attr, + &dev_attr_immu_tsb_hits_ctx0_4mb_tte.attr, + &dev_attr_immu_tsb_ticks_ctx0_4mb_tte.attr, + &dev_attr_immu_tsb_hits_ctx0_256mb_tte.attr, + &dev_attr_immu_tsb_ticks_ctx0_256mb_tte.attr, + &dev_attr_immu_tsb_hits_ctxnon0_8k_tte.attr, + &dev_attr_immu_tsb_ticks_ctxnon0_8k_tte.attr, + &dev_attr_immu_tsb_hits_ctxnon0_64k_tte.attr, + &dev_attr_immu_tsb_ticks_ctxnon0_64k_tte.attr, + &dev_attr_immu_tsb_hits_ctxnon0_4mb_tte.attr, + &dev_attr_immu_tsb_ticks_ctxnon0_4mb_tte.attr, + &dev_attr_immu_tsb_hits_ctxnon0_256mb_tte.attr, + &dev_attr_immu_tsb_ticks_ctxnon0_256mb_tte.attr, + &dev_attr_dmmu_tsb_hits_ctx0_8k_tte.attr, + &dev_attr_dmmu_tsb_ticks_ctx0_8k_tte.attr, + &dev_attr_dmmu_tsb_hits_ctx0_64k_tte.attr, + &dev_attr_dmmu_tsb_ticks_ctx0_64k_tte.attr, + &dev_attr_dmmu_tsb_hits_ctx0_4mb_tte.attr, + &dev_attr_dmmu_tsb_ticks_ctx0_4mb_tte.attr, + &dev_attr_dmmu_tsb_hits_ctx0_256mb_tte.attr, + &dev_attr_dmmu_tsb_ticks_ctx0_256mb_tte.attr, + &dev_attr_dmmu_tsb_hits_ctxnon0_8k_tte.attr, + &dev_attr_dmmu_tsb_ticks_ctxnon0_8k_tte.attr, + &dev_attr_dmmu_tsb_hits_ctxnon0_64k_tte.attr, + &dev_attr_dmmu_tsb_ticks_ctxnon0_64k_tte.attr, + &dev_attr_dmmu_tsb_hits_ctxnon0_4mb_tte.attr, + &dev_attr_dmmu_tsb_ticks_ctxnon0_4mb_tte.attr, + &dev_attr_dmmu_tsb_hits_ctxnon0_256mb_tte.attr, + &dev_attr_dmmu_tsb_ticks_ctxnon0_256mb_tte.attr, NULL, }; @@ -139,15 +139,15 @@ static unsigned long write_mmustat_enable(unsigned long val) return sun4v_mmustat_conf(ra, &orig_ra); } -static ssize_t show_mmustat_enable(struct sys_device *s, - struct sysdev_attribute *attr, char *buf) +static ssize_t show_mmustat_enable(struct device *s, + struct device_attribute *attr, char *buf) { unsigned long val = run_on_cpu(s->id, read_mmustat_enable, 0); return sprintf(buf, "%lx\n", val); } -static ssize_t store_mmustat_enable(struct sys_device *s, - struct sysdev_attribute *attr, const char *buf, +static ssize_t store_mmustat_enable(struct device *s, + struct device_attribute *attr, const char *buf, size_t count) { unsigned long val, err; @@ -163,39 +163,39 @@ static ssize_t store_mmustat_enable(struct sys_device *s, return count; } -static SYSDEV_ATTR(mmustat_enable, 0644, show_mmustat_enable, store_mmustat_enable); +static DEVICE_ATTR(mmustat_enable, 0644, show_mmustat_enable, store_mmustat_enable); static int mmu_stats_supported; -static int register_mmu_stats(struct sys_device *s) +static int register_mmu_stats(struct device *s) { if (!mmu_stats_supported) return 0; - sysdev_create_file(s, &attr_mmustat_enable); + device_create_file(s, &dev_attr_mmustat_enable); return sysfs_create_group(&s->kobj, &mmu_stat_group); } #ifdef CONFIG_HOTPLUG_CPU -static void unregister_mmu_stats(struct sys_device *s) +static void unregister_mmu_stats(struct device *s) { if (!mmu_stats_supported) return; sysfs_remove_group(&s->kobj, &mmu_stat_group); - sysdev_remove_file(s, &attr_mmustat_enable); + device_remove_file(s, &dev_attr_mmustat_enable); } #endif #define SHOW_CPUDATA_ULONG_NAME(NAME, MEMBER) \ -static ssize_t show_##NAME(struct sys_device *dev, \ - struct sysdev_attribute *attr, char *buf) \ +static ssize_t show_##NAME(struct device *dev, \ + struct device_attribute *attr, char *buf) \ { \ cpuinfo_sparc *c = &cpu_data(dev->id); \ return sprintf(buf, "%lu\n", c->MEMBER); \ } #define SHOW_CPUDATA_UINT_NAME(NAME, MEMBER) \ -static ssize_t show_##NAME(struct sys_device *dev, \ - struct sysdev_attribute *attr, char *buf) \ +static ssize_t show_##NAME(struct device *dev, \ + struct device_attribute *attr, char *buf) \ { \ cpuinfo_sparc *c = &cpu_data(dev->id); \ return sprintf(buf, "%u\n", c->MEMBER); \ @@ -209,14 +209,14 @@ SHOW_CPUDATA_UINT_NAME(l1_icache_line_size, icache_line_size); SHOW_CPUDATA_UINT_NAME(l2_cache_size, ecache_size); SHOW_CPUDATA_UINT_NAME(l2_cache_line_size, ecache_line_size); -static struct sysdev_attribute cpu_core_attrs[] = { - _SYSDEV_ATTR(clock_tick, 0444, show_clock_tick, NULL), - _SYSDEV_ATTR(l1_dcache_size, 0444, show_l1_dcache_size, NULL), - _SYSDEV_ATTR(l1_dcache_line_size, 0444, show_l1_dcache_line_size, NULL), - _SYSDEV_ATTR(l1_icache_size, 0444, show_l1_icache_size, NULL), - _SYSDEV_ATTR(l1_icache_line_size, 0444, show_l1_icache_line_size, NULL), - _SYSDEV_ATTR(l2_cache_size, 0444, show_l2_cache_size, NULL), - _SYSDEV_ATTR(l2_cache_line_size, 0444, show_l2_cache_line_size, NULL), +static struct device_attribute cpu_core_attrs[] = { + __ATTR(clock_tick, 0444, show_clock_tick, NULL), + __ATTR(l1_dcache_size, 0444, show_l1_dcache_size, NULL), + __ATTR(l1_dcache_line_size, 0444, show_l1_dcache_line_size, NULL), + __ATTR(l1_icache_size, 0444, show_l1_icache_size, NULL), + __ATTR(l1_icache_line_size, 0444, show_l1_icache_line_size, NULL), + __ATTR(l2_cache_size, 0444, show_l2_cache_size, NULL), + __ATTR(l2_cache_line_size, 0444, show_l2_cache_line_size, NULL), }; static DEFINE_PER_CPU(struct cpu, cpu_devices); @@ -224,11 +224,11 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices); static void register_cpu_online(unsigned int cpu) { struct cpu *c = &per_cpu(cpu_devices, cpu); - struct sys_device *s = &c->sysdev; + struct device *s = &c->dev; int i; for (i = 0; i < ARRAY_SIZE(cpu_core_attrs); i++) - sysdev_create_file(s, &cpu_core_attrs[i]); + device_create_file(s, &cpu_core_attrs[i]); register_mmu_stats(s); } @@ -237,12 +237,12 @@ static void register_cpu_online(unsigned int cpu) static void unregister_cpu_online(unsigned int cpu) { struct cpu *c = &per_cpu(cpu_devices, cpu); - struct sys_device *s = &c->sysdev; + struct device *s = &c->dev; int i; unregister_mmu_stats(s); for (i = 0; i < ARRAY_SIZE(cpu_core_attrs); i++) - sysdev_remove_file(s, &cpu_core_attrs[i]); + device_remove_file(s, &cpu_core_attrs[i]); } #endif diff --git a/arch/sparc/lib/atomic_32.S b/arch/sparc/lib/atomic_32.S index 178cbb8ae1b9..eb6c7359cbd1 100644 --- a/arch/sparc/lib/atomic_32.S +++ b/arch/sparc/lib/atomic_32.S @@ -40,60 +40,5 @@ ___xchg32_sun4md: mov %g4, %o7 #endif - /* Read asm-sparc/atomic.h carefully to understand how this works for SMP. - * Really, some things here for SMP are overly clever, go read the header. - */ - .globl ___atomic24_add -___atomic24_add: - rd %psr, %g3 ! Keep the code small, old way was stupid - nop; nop; nop; ! Let the bits set - or %g3, PSR_PIL, %g7 ! Disable interrupts - wr %g7, 0x0, %psr ! Set %psr - nop; nop; nop; ! Let the bits set -#ifdef CONFIG_SMP -1: ldstub [%g1 + 3], %g7 ! Spin on the byte lock for SMP. - orcc %g7, 0x0, %g0 ! Did we get it? - bne 1b ! Nope... - ld [%g1], %g7 ! Load locked atomic24_t - sra %g7, 8, %g7 ! Get signed 24-bit integer - add %g7, %g2, %g2 ! Add in argument - sll %g2, 8, %g7 ! Transpose back to atomic24_t - st %g7, [%g1] ! Clever: This releases the lock as well. -#else - ld [%g1], %g7 ! Load locked atomic24_t - add %g7, %g2, %g2 ! Add in argument - st %g2, [%g1] ! Store it back -#endif - wr %g3, 0x0, %psr ! Restore original PSR_PIL - nop; nop; nop; ! Let the bits set - jmpl %o7, %g0 ! NOTE: not + 8, see callers in atomic.h - mov %g4, %o7 ! Restore %o7 - - .globl ___atomic24_sub -___atomic24_sub: - rd %psr, %g3 ! Keep the code small, old way was stupid - nop; nop; nop; ! Let the bits set - or %g3, PSR_PIL, %g7 ! Disable interrupts - wr %g7, 0x0, %psr ! Set %psr - nop; nop; nop; ! Let the bits set -#ifdef CONFIG_SMP -1: ldstub [%g1 + 3], %g7 ! Spin on the byte lock for SMP. - orcc %g7, 0x0, %g0 ! Did we get it? - bne 1b ! Nope... - ld [%g1], %g7 ! Load locked atomic24_t - sra %g7, 8, %g7 ! Get signed 24-bit integer - sub %g7, %g2, %g2 ! Subtract argument - sll %g2, 8, %g7 ! Transpose back to atomic24_t - st %g7, [%g1] ! Clever: This releases the lock as well -#else - ld [%g1], %g7 ! Load locked atomic24_t - sub %g7, %g2, %g2 ! Subtract argument - st %g2, [%g1] ! Store it back -#endif - wr %g3, 0x0, %psr ! Restore original PSR_PIL - nop; nop; nop; ! Let the bits set - jmpl %o7, %g0 ! NOTE: not + 8, see callers in atomic.h - mov %g4, %o7 ! Restore %o7 - .globl __atomic_end __atomic_end: diff --git a/arch/sparc/lib/iomap.c b/arch/sparc/lib/iomap.c index 9ef37e13a920..c4d42a50ebc0 100644 --- a/arch/sparc/lib/iomap.c +++ b/arch/sparc/lib/iomap.c @@ -18,31 +18,8 @@ void ioport_unmap(void __iomem *addr) EXPORT_SYMBOL(ioport_map); EXPORT_SYMBOL(ioport_unmap); -/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (!len || !start) - return NULL; - if (maxlen && len > maxlen) - len = maxlen; - if (flags & IORESOURCE_IO) - return ioport_map(start, len); - if (flags & IORESOURCE_MEM) { - if (flags & IORESOURCE_CACHEABLE) - return ioremap(start, len); - return ioremap_nocache(start, len); - } - /* What? */ - return NULL; -} - void pci_iounmap(struct pci_dev *dev, void __iomem * addr) { /* nothing to do */ } -EXPORT_SYMBOL(pci_iomap); EXPORT_SYMBOL(pci_iounmap); diff --git a/arch/sparc/lib/ksyms.c b/arch/sparc/lib/ksyms.c index 1b30bb3bfdb1..f73c2240fe60 100644 --- a/arch/sparc/lib/ksyms.c +++ b/arch/sparc/lib/ksyms.c @@ -62,8 +62,6 @@ extern void ___rw_read_enter(void); extern void ___rw_read_try(void); extern void ___rw_read_exit(void); extern void ___rw_write_enter(void); -extern void ___atomic24_add(void); -extern void ___atomic24_sub(void); /* Alias functions whose names begin with "." and export the aliases. * The module references will be fixed up by module_frob_arch_sections. @@ -97,10 +95,6 @@ EXPORT_SYMBOL(___rw_read_exit); EXPORT_SYMBOL(___rw_write_enter); #endif -/* Atomic operations. */ -EXPORT_SYMBOL(___atomic24_add); -EXPORT_SYMBOL(___atomic24_sub); - EXPORT_SYMBOL(__ashrdi3); EXPORT_SYMBOL(__ashldi3); EXPORT_SYMBOL(__lshrdi3); diff --git a/arch/sparc/mm/btfixup.c b/arch/sparc/mm/btfixup.c index 5175ac2f4820..8a7f81743c12 100644 --- a/arch/sparc/mm/btfixup.c +++ b/arch/sparc/mm/btfixup.c @@ -302,8 +302,7 @@ void __init btfixup(void) case 'i': /* INT */ if ((insn & 0xc1c00000) == 0x01000000) /* %HI */ set_addr(addr, q[1], fmangled, (insn & 0xffc00000) | (p[1] >> 10)); - else if ((insn & 0x80002000) == 0x80002000 && - (insn & 0x01800000) != 0x01800000) /* %LO */ + else if ((insn & 0x80002000) == 0x80002000) /* %LO */ set_addr(addr, q[1], fmangled, (insn & 0xffffe000) | (p[1] & 0x3ff)); else { prom_printf(insn_i, p, addr, insn); diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 8e073d802139..b3f5e7dfea51 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -790,7 +790,7 @@ static int find_node(unsigned long addr) return -1; } -u64 memblock_nid_range(u64 start, u64 end, int *nid) +static u64 memblock_nid_range(u64 start, u64 end, int *nid) { *nid = find_node(start); start += PAGE_SIZE; @@ -808,7 +808,7 @@ u64 memblock_nid_range(u64 start, u64 end, int *nid) return start; } #else -u64 memblock_nid_range(u64 start, u64 end, int *nid) +static u64 memblock_nid_range(u64 start, u64 end, int *nid) { *nid = 0; return end; @@ -816,7 +816,7 @@ u64 memblock_nid_range(u64 start, u64 end, int *nid) #endif /* This must be invoked after performing all of the necessary - * add_active_range() calls for 'nid'. We need to be able to get + * memblock_set_node() calls for 'nid'. We need to be able to get * correct data from get_pfn_range_for_nid(). */ static void __init allocate_node_data(int nid) @@ -987,14 +987,11 @@ static void __init add_node_ranges(void) this_end = memblock_nid_range(start, end, &nid); - numadbg("Adding active range nid[%d] " + numadbg("Setting memblock NUMA node nid[%d] " "start[%lx] end[%lx]\n", nid, start, this_end); - add_active_range(nid, - start >> PAGE_SHIFT, - this_end >> PAGE_SHIFT); - + memblock_set_node(start, this_end - start, nid); start = this_end; } } @@ -1282,7 +1279,6 @@ static void __init bootmem_init_nonnuma(void) { unsigned long top_of_ram = memblock_end_of_DRAM(); unsigned long total_ram = memblock_phys_mem_size(); - struct memblock_region *reg; numadbg("bootmem_init_nonnuma()\n"); @@ -1292,20 +1288,8 @@ static void __init bootmem_init_nonnuma(void) (top_of_ram - total_ram) >> 20); init_node_masks_nonnuma(); - - for_each_memblock(memory, reg) { - unsigned long start_pfn, end_pfn; - - if (!reg->size) - continue; - - start_pfn = memblock_region_memory_base_pfn(reg); - end_pfn = memblock_region_memory_end_pfn(reg); - add_active_range(0, start_pfn, end_pfn); - } - + memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0); allocate_node_data(0); - node_set_online(0); } @@ -1769,8 +1753,6 @@ void __init paging_init(void) sun4v_ktsb_init(); } - memblock_init(); - /* Find available physical memory... * * Read it twice in order to work around a bug in openfirmware. @@ -1796,7 +1778,7 @@ void __init paging_init(void) memblock_enforce_memory_limit(cmdline_memory_size); - memblock_analyze(); + memblock_allow_resize(); memblock_dump_all(); set_bit(0, mmu_context_bmap); diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 70a0de46cd1b..11270ca22c0a 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -321,6 +321,7 @@ config PCI bool "PCI support" default y select PCI_DOMAINS + select GENERIC_PCI_IOMAP ---help--- Enable PCI root complex support, so PCIe endpoint devices can be attached to the Tile chip. Many, but not all, PCI devices diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h index c9ea1652af03..d2152deb1f3c 100644 --- a/arch/tile/include/asm/io.h +++ b/arch/tile/include/asm/io.h @@ -204,7 +204,8 @@ static inline long ioport_panic(void) static inline void __iomem *ioport_map(unsigned long port, unsigned int len) { - return (void __iomem *) ioport_panic(); + pr_info("ioport_map: mapping IO resources is unsupported on tile.\n"); + return NULL; } static inline void ioport_unmap(void __iomem *addr) diff --git a/arch/tile/include/asm/irq.h b/arch/tile/include/asm/irq.h index 94e9a511de84..f80f8ceabc67 100644 --- a/arch/tile/include/asm/irq.h +++ b/arch/tile/include/asm/irq.h @@ -74,16 +74,6 @@ enum { */ void tile_irq_activate(unsigned int irq, int tile_irq_type); -/* - * For onboard, non-PCI (e.g. TILE_IRQ_PERCPU) devices, drivers know - * how to use enable/disable_percpu_irq() to manage interrupts on each - * core. We can't use the generic enable/disable_irq() because they - * use a single reference count per irq, rather than per cpu per irq. - */ -void enable_percpu_irq(unsigned int irq); -void disable_percpu_irq(unsigned int irq); - - void setup_irq_regs(void); #endif /* _ASM_TILE_IRQ_H */ diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h index 7f03cefed1b9..5d5a635530bd 100644 --- a/arch/tile/include/asm/pci.h +++ b/arch/tile/include/asm/pci.h @@ -16,6 +16,7 @@ #define _ASM_TILE_PCI_H #include <linux/pci.h> +#include <asm-generic/pci_iomap.h> /* * Structure of a PCI controller (host bridge) @@ -49,7 +50,6 @@ struct pci_controller { int __devinit tile_pci_init(void); int __devinit pcibios_init(void); -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} void __devinit pcibios_fixup_bus(struct pci_bus *bus); @@ -76,13 +76,6 @@ static inline int pcibios_assign_all_busses(void) return 1; } -/* - * No special bus mastering setup handling. - */ -static inline void pcibios_set_master(struct pci_dev *dev) -{ -} - #define PCIBIOS_MIN_MEM 0 #define PCIBIOS_MIN_IO 0 diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c index aa0134db2dd6..02e628065012 100644 --- a/arch/tile/kernel/irq.c +++ b/arch/tile/kernel/irq.c @@ -152,14 +152,13 @@ void tile_dev_intr(struct pt_regs *regs, int intnum) * Remove an irq from the disabled mask. If we're in an interrupt * context, defer enabling the HW interrupt until we leave. */ -void enable_percpu_irq(unsigned int irq) +static void tile_irq_chip_enable(struct irq_data *d) { - get_cpu_var(irq_disable_mask) &= ~(1UL << irq); + get_cpu_var(irq_disable_mask) &= ~(1UL << d->irq); if (__get_cpu_var(irq_depth) == 0) - unmask_irqs(1UL << irq); + unmask_irqs(1UL << d->irq); put_cpu_var(irq_disable_mask); } -EXPORT_SYMBOL(enable_percpu_irq); /* * Add an irq to the disabled mask. We disable the HW interrupt @@ -167,13 +166,12 @@ EXPORT_SYMBOL(enable_percpu_irq); * in an interrupt context, the return path is careful to avoid * unmasking a newly disabled interrupt. */ -void disable_percpu_irq(unsigned int irq) +static void tile_irq_chip_disable(struct irq_data *d) { - get_cpu_var(irq_disable_mask) |= (1UL << irq); - mask_irqs(1UL << irq); + get_cpu_var(irq_disable_mask) |= (1UL << d->irq); + mask_irqs(1UL << d->irq); put_cpu_var(irq_disable_mask); } -EXPORT_SYMBOL(disable_percpu_irq); /* Mask an interrupt. */ static void tile_irq_chip_mask(struct irq_data *d) @@ -209,6 +207,8 @@ static void tile_irq_chip_eoi(struct irq_data *d) static struct irq_chip tile_irq_chip = { .name = "tile_irq_chip", + .irq_enable = tile_irq_chip_enable, + .irq_disable = tile_irq_chip_disable, .irq_ack = tile_irq_chip_ack, .irq_eoi = tile_irq_chip_eoi, .irq_mask = tile_irq_chip_mask, diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c index 658f2ce426a4..b3ed19f8779c 100644 --- a/arch/tile/kernel/pci-dma.c +++ b/arch/tile/kernel/pci-dma.c @@ -15,6 +15,7 @@ #include <linux/mm.h> #include <linux/dma-mapping.h> #include <linux/vmalloc.h> +#include <linux/export.h> #include <asm/tlbflush.h> #include <asm/homecache.h> diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c index 2a8014cb1ff5..a1bb59eecc18 100644 --- a/arch/tile/kernel/pci.c +++ b/arch/tile/kernel/pci.c @@ -24,6 +24,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/uaccess.h> +#include <linux/export.h> #include <asm/processor.h> #include <asm/sections.h> @@ -394,6 +395,11 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) /* Nothing needs to be done. */ } +void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling. */ +} + /* * This can be called from the generic PCI layer, but doesn't need to * do anything. @@ -465,27 +471,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) return 0; } -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) -{ - unsigned long start = pci_resource_start(dev, bar); - unsigned long len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (!len) - return NULL; - if (max && len > max) - len = max; - - if (!(flags & IORESOURCE_MEM)) { - pr_info("PCI: Trying to map invalid resource %#lx\n", flags); - start = 0; - } - - return (void __iomem *)start; -} -EXPORT_SYMBOL(pci_iomap); - - /**************************************************************** * * Tile PCI config space read/write routines diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c index 9c45d8bbdf57..4c1ac6e5347a 100644 --- a/arch/tile/kernel/process.c +++ b/arch/tile/kernel/process.c @@ -85,7 +85,8 @@ void cpu_idle(void) /* endless idle loop with no priority at all */ while (1) { - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); + rcu_idle_enter(); while (!need_resched()) { if (cpu_is_offline(cpu)) BUG(); /* no HOTPLUG_CPU */ @@ -105,7 +106,8 @@ void cpu_idle(void) local_irq_enable(); current_thread_info()->status |= TS_POLLING; } - tick_nohz_restart_sched_tick(); + rcu_idle_exit(); + tick_nohz_idle_exit(); preempt_enable_no_resched(); schedule(); preempt_disable(); diff --git a/arch/tile/kernel/sysfs.c b/arch/tile/kernel/sysfs.c index b671a86f4515..f862b005eb73 100644 --- a/arch/tile/kernel/sysfs.c +++ b/arch/tile/kernel/sysfs.c @@ -14,10 +14,11 @@ * /sys entry support. */ -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/cpu.h> #include <linux/slab.h> #include <linux/smp.h> +#include <linux/stat.h> #include <hv/hypervisor.h> /* Return a string queried from the hypervisor, truncated to page size. */ @@ -31,55 +32,55 @@ static ssize_t get_hv_confstr(char *page, int query) return n; } -static ssize_t chip_width_show(struct sysdev_class *dev, - struct sysdev_class_attribute *attr, +static ssize_t chip_width_show(struct device *dev, + struct device_attribute *attr, char *page) { return sprintf(page, "%u\n", smp_width); } -static SYSDEV_CLASS_ATTR(chip_width, 0444, chip_width_show, NULL); +static DEVICE_ATTR(chip_width, 0444, chip_width_show, NULL); -static ssize_t chip_height_show(struct sysdev_class *dev, - struct sysdev_class_attribute *attr, +static ssize_t chip_height_show(struct device *dev, + struct device_attribute *attr, char *page) { return sprintf(page, "%u\n", smp_height); } -static SYSDEV_CLASS_ATTR(chip_height, 0444, chip_height_show, NULL); +static DEVICE_ATTR(chip_height, 0444, chip_height_show, NULL); -static ssize_t chip_serial_show(struct sysdev_class *dev, - struct sysdev_class_attribute *attr, +static ssize_t chip_serial_show(struct device *dev, + struct device_attribute *attr, char *page) { return get_hv_confstr(page, HV_CONFSTR_CHIP_SERIAL_NUM); } -static SYSDEV_CLASS_ATTR(chip_serial, 0444, chip_serial_show, NULL); +static DEVICE_ATTR(chip_serial, 0444, chip_serial_show, NULL); -static ssize_t chip_revision_show(struct sysdev_class *dev, - struct sysdev_class_attribute *attr, +static ssize_t chip_revision_show(struct device *dev, + struct device_attribute *attr, char *page) { return get_hv_confstr(page, HV_CONFSTR_CHIP_REV); } -static SYSDEV_CLASS_ATTR(chip_revision, 0444, chip_revision_show, NULL); +static DEVICE_ATTR(chip_revision, 0444, chip_revision_show, NULL); -static ssize_t type_show(struct sysdev_class *dev, - struct sysdev_class_attribute *attr, +static ssize_t type_show(struct device *dev, + struct device_attribute *attr, char *page) { return sprintf(page, "tilera\n"); } -static SYSDEV_CLASS_ATTR(type, 0444, type_show, NULL); +static DEVICE_ATTR(type, 0444, type_show, NULL); #define HV_CONF_ATTR(name, conf) \ - static ssize_t name ## _show(struct sysdev_class *dev, \ - struct sysdev_class_attribute *attr, \ + static ssize_t name ## _show(struct device *dev, \ + struct device_attribute *attr, \ char *page) \ { \ return get_hv_confstr(page, conf); \ } \ - static SYSDEV_CLASS_ATTR(name, 0444, name ## _show, NULL); + static DEVICE_ATTR(name, 0444, name ## _show, NULL); HV_CONF_ATTR(version, HV_CONFSTR_HV_SW_VER) HV_CONF_ATTR(config_version, HV_CONFSTR_HV_CONFIG_VER) @@ -95,15 +96,15 @@ HV_CONF_ATTR(mezz_description, HV_CONFSTR_MEZZ_DESC) HV_CONF_ATTR(switch_control, HV_CONFSTR_SWITCH_CONTROL) static struct attribute *board_attrs[] = { - &attr_board_part.attr, - &attr_board_serial.attr, - &attr_board_revision.attr, - &attr_board_description.attr, - &attr_mezz_part.attr, - &attr_mezz_serial.attr, - &attr_mezz_revision.attr, - &attr_mezz_description.attr, - &attr_switch_control.attr, + &dev_attr_board_part.attr, + &dev_attr_board_serial.attr, + &dev_attr_board_revision.attr, + &dev_attr_board_description.attr, + &dev_attr_mezz_part.attr, + &dev_attr_mezz_serial.attr, + &dev_attr_mezz_revision.attr, + &dev_attr_mezz_description.attr, + &dev_attr_switch_control.attr, NULL }; @@ -150,12 +151,11 @@ hvconfig_bin_read(struct file *filp, struct kobject *kobj, static int __init create_sysfs_entries(void) { - struct sysdev_class *cls = &cpu_sysdev_class; int err = 0; #define create_cpu_attr(name) \ if (!err) \ - err = sysfs_create_file(&cls->kset.kobj, &attr_##name.attr); + err = device_create_file(cpu_subsys.dev_root, &dev_attr_##name); create_cpu_attr(chip_width); create_cpu_attr(chip_height); create_cpu_attr(chip_serial); @@ -163,7 +163,7 @@ static int __init create_sysfs_entries(void) #define create_hv_attr(name) \ if (!err) \ - err = sysfs_create_file(hypervisor_kobj, &attr_##name.attr); + err = sysfs_create_file(hypervisor_kobj, &dev_attr_##name); create_hv_attr(type); create_hv_attr(version); create_hv_attr(config_version); diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c index a87d2a859ba9..2a81d32de0da 100644 --- a/arch/tile/lib/exports.c +++ b/arch/tile/lib/exports.c @@ -39,6 +39,9 @@ EXPORT_SYMBOL(finv_user_asm); EXPORT_SYMBOL(current_text_addr); EXPORT_SYMBOL(dump_stack); +/* arch/tile/kernel/head.S */ +EXPORT_SYMBOL(empty_zero_page); + /* arch/tile/lib/, various memcpy files */ EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(__copy_to_user_inatomic); diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c index 25b7b90fd620..c1eaaa1fcc20 100644 --- a/arch/tile/mm/fault.c +++ b/arch/tile/mm/fault.c @@ -54,7 +54,7 @@ static noinline void force_sig_info_fault(const char *type, int si_signo, if (unlikely(tsk->pid < 2)) { panic("Signal %d (code %d) at %#lx sent to %s!", si_signo, si_code & 0xffff, address, - tsk->pid ? "init" : "the idle task"); + is_idle_task(tsk) ? "the idle task" : "init"); } info.si_signo = si_signo; @@ -515,7 +515,7 @@ no_context: if (unlikely(tsk->pid < 2)) { panic("Kernel page fault running %s!", - tsk->pid ? "init" : "the idle task"); + is_idle_task(tsk) ? "the idle task" : "init"); } /* diff --git a/arch/tile/mm/homecache.c b/arch/tile/mm/homecache.c index cbe6f4f9eca3..1cc6ae477c98 100644 --- a/arch/tile/mm/homecache.c +++ b/arch/tile/mm/homecache.c @@ -449,9 +449,12 @@ void homecache_free_pages(unsigned long addr, unsigned int order) VM_BUG_ON(!virt_addr_valid((void *)addr)); page = virt_to_page((void *)addr); if (put_page_testzero(page)) { - int pages = (1 << order); homecache_change_page_home(page, order, initial_page_home()); - while (pages--) - __free_page(page++); + if (order == 0) { + free_hot_cold_page(page, 0); + } else { + init_page_count(page); + __free_pages(page, order); + } } } diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common index a9234838e8a2..b37ae706af3e 100644 --- a/arch/um/Kconfig.common +++ b/arch/um/Kconfig.common @@ -8,6 +8,7 @@ config UML default y select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW + select GENERIC_CPU_DEVICES config MMU bool diff --git a/arch/um/include/asm/thread_info.h b/arch/um/include/asm/thread_info.h index 5bd1bad33fab..200c4ab1240c 100644 --- a/arch/um/include/asm/thread_info.h +++ b/arch/um/include/asm/thread_info.h @@ -71,7 +71,6 @@ static inline struct thread_info *current_thread_info(void) #define TIF_MEMDIE 5 /* is terminating due to OOM killer */ #define TIF_SYSCALL_AUDIT 6 #define TIF_RESTORE_SIGMASK 7 -#define TIF_FREEZE 16 /* is freezing for suspend */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) @@ -80,6 +79,5 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_MEMDIE (1 << TIF_MEMDIE) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) -#define _TIF_FREEZE (1 << TIF_FREEZE) #endif diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c index c5338351aecd..69f24905abdc 100644 --- a/arch/um/kernel/process.c +++ b/arch/um/kernel/process.c @@ -246,10 +246,12 @@ void default_idle(void) if (need_resched()) schedule(); - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); + rcu_idle_enter(); nsecs = disable_timer(); idle_sleep(nsecs); - tick_nohz_restart_sched_tick(); + rcu_idle_exit(); + tick_nohz_idle_exit(); } } diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c index a08d9fab81f2..82a6e22f1f35 100644 --- a/arch/um/kernel/time.c +++ b/arch/um/kernel/time.c @@ -75,8 +75,6 @@ static struct clocksource itimer_clocksource = { .rating = 300, .read = itimer_read, .mask = CLOCKSOURCE_MASK(64), - .mult = 1000, - .shift = 0, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -94,9 +92,9 @@ static void __init setup_itimer(void) clockevent_delta2ns(60 * HZ, &itimer_clockevent); itimer_clockevent.min_delta_ns = clockevent_delta2ns(1, &itimer_clockevent); - err = clocksource_register(&itimer_clocksource); + err = clocksource_register_hz(&itimer_clocksource, USEC_PER_SEC); if (err) { - printk(KERN_ERR "clocksource_register returned %d\n", err); + printk(KERN_ERR "clocksource_register_hz returned %d\n", err); return; } clockevents_register_device(&itimer_clockevent); diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig index 942ed6174f1d..eeb8054c7cd8 100644 --- a/arch/unicore32/Kconfig +++ b/arch/unicore32/Kconfig @@ -12,6 +12,7 @@ config UNICORE32 select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW select ARCH_WANT_FRAME_POINTERS + select GENERIC_IOMAP help UniCore-32 is 32-bit Instruction Set Architecture, including a series of low-power-consumption RISC chip @@ -30,9 +31,6 @@ config GENERIC_CLOCKEVENTS config GENERIC_CSUM def_bool y -config GENERIC_IOMAP - def_bool y - config NO_IOPORT bool diff --git a/arch/unicore32/include/asm/io.h b/arch/unicore32/include/asm/io.h index 1a5c5a5eb39c..adddf6d64077 100644 --- a/arch/unicore32/include/asm/io.h +++ b/arch/unicore32/include/asm/io.h @@ -37,15 +37,9 @@ extern void __uc32_iounmap(volatile void __iomem *addr); */ #define ioremap(cookie, size) __uc32_ioremap(cookie, size) #define ioremap_cached(cookie, size) __uc32_ioremap_cached(cookie, size) +#define ioremap_nocache(cookie, size) __uc32_ioremap(cookie, size) #define iounmap(cookie) __uc32_iounmap(cookie) -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#undef xlate_dev_mem_ptr -#define xlate_dev_mem_ptr(p) __va(p) - #define HAVE_ARCH_PIO_SIZE #define PIO_OFFSET (unsigned int)(PCI_IOBASE) #define PIO_MASK (unsigned int)(IO_SPACE_LIMIT) diff --git a/arch/unicore32/include/asm/pci.h b/arch/unicore32/include/asm/pci.h index c5b28b459535..dd3867727c35 100644 --- a/arch/unicore32/include/asm/pci.h +++ b/arch/unicore32/include/asm/pci.h @@ -17,11 +17,6 @@ #include <asm-generic/pci.h> #include <mach/hardware.h> /* for PCIBIOS_MIN_* */ -static inline void pcibios_set_master(struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} - static inline void pcibios_penalize_isa_irq(int irq, int active) { /* We don't do dynamic PCI IRQ allocation */ diff --git a/arch/unicore32/include/asm/thread_info.h b/arch/unicore32/include/asm/thread_info.h index c270e9e04861..89f7557583b8 100644 --- a/arch/unicore32/include/asm/thread_info.h +++ b/arch/unicore32/include/asm/thread_info.h @@ -135,14 +135,12 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NOTIFY_RESUME 2 /* callback before returning to user */ #define TIF_SYSCALL_TRACE 8 #define TIF_MEMDIE 18 -#define TIF_FREEZE 19 #define TIF_RESTORE_SIGMASK 20 #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_FREEZE (1 << TIF_FREEZE) #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) /* diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c index 4892fbb54ebf..a8f07fe10cad 100644 --- a/arch/unicore32/kernel/pci.c +++ b/arch/unicore32/kernel/pci.c @@ -309,6 +309,11 @@ char * __devinit pcibios_setup(char *str) return str; } +void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} + /* * From arch/i386/kernel/pci-i386.c: * diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c index ba401df971ed..52edc2b62873 100644 --- a/arch/unicore32/kernel/process.c +++ b/arch/unicore32/kernel/process.c @@ -55,7 +55,8 @@ void cpu_idle(void) { /* endless idle loop with no priority at all */ while (1) { - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); + rcu_idle_enter(); while (!need_resched()) { local_irq_disable(); stop_critical_timings(); @@ -63,7 +64,8 @@ void cpu_idle(void) local_irq_enable(); start_critical_timings(); } - tick_nohz_restart_sched_tick(); + rcu_idle_exit(); + tick_nohz_idle_exit(); preempt_enable_no_resched(); schedule(); preempt_disable(); diff --git a/arch/unicore32/kernel/puv3-core.c b/arch/unicore32/kernel/puv3-core.c index 1a505a787765..254adeecc61a 100644 --- a/arch/unicore32/kernel/puv3-core.c +++ b/arch/unicore32/kernel/puv3-core.c @@ -13,7 +13,6 @@ #include <linux/init.h> #include <linux/device.h> -#include <linux/sysdev.h> #include <linux/amba/bus.h> #include <linux/platform_device.h> #include <linux/io.h> diff --git a/arch/unicore32/kernel/puv3-nb0916.c b/arch/unicore32/kernel/puv3-nb0916.c index e731c561ed4e..181108b8ecce 100644 --- a/arch/unicore32/kernel/puv3-nb0916.c +++ b/arch/unicore32/kernel/puv3-nb0916.c @@ -13,7 +13,6 @@ #include <linux/init.h> #include <linux/device.h> -#include <linux/sysdev.h> #include <linux/platform_device.h> #include <linux/mtd/physmap.h> #include <linux/io.h> @@ -124,7 +123,7 @@ int __init mach_nb0916_init(void) if (request_irq(gpio_to_irq(GPI_LCD_CASE_OFF), &nb0916_lcdcaseoff_handler, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "NB0916 lcd case off", NULL) < 0) { printk(KERN_DEBUG "LCD-Case-OFF IRQ %d not available\n", @@ -132,7 +131,7 @@ int __init mach_nb0916_init(void) } if (request_irq(gpio_to_irq(GPI_OTP_INT), &nb0916_overheat_handler, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "NB0916 overheating protection", NULL) < 0) { printk(KERN_DEBUG "Overheating Protection IRQ %d not available\n", diff --git a/arch/unicore32/kernel/setup.c b/arch/unicore32/kernel/setup.c index 471b6bca8da4..87adbf5ebfe0 100644 --- a/arch/unicore32/kernel/setup.c +++ b/arch/unicore32/kernel/setup.c @@ -37,6 +37,7 @@ #include <asm/cacheflush.h> #include <asm/tlbflush.h> #include <asm/traps.h> +#include <asm/memblock.h> #include "setup.h" @@ -64,7 +65,7 @@ static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE; */ static struct resource mem_res[] = { { - .name = "Kernel text", + .name = "Kernel code", .start = 0, .end = 0, .flags = IORESOURCE_MEM diff --git a/arch/unicore32/kernel/signal.c b/arch/unicore32/kernel/signal.c index b163fca56789..911b549a6df5 100644 --- a/arch/unicore32/kernel/signal.c +++ b/arch/unicore32/kernel/signal.c @@ -63,10 +63,7 @@ static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf) err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set)); if (err == 0) { sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); } err |= __get_user(regs->UCreg_00, &sf->uc.uc_mcontext.regs.UCreg_00); @@ -321,6 +318,7 @@ static int handle_signal(unsigned long sig, struct k_sigaction *ka, { struct thread_info *thread = current_thread_info(); struct task_struct *tsk = current; + sigset_t blocked; int usig = sig; int ret; @@ -372,13 +370,10 @@ static int handle_signal(unsigned long sig, struct k_sigaction *ka, /* * Block the signal if we were successful. */ - spin_lock_irq(&tsk->sighand->siglock); - sigorsets(&tsk->blocked, &tsk->blocked, - &ka->sa.sa_mask); + sigorsets(&blocked, &tsk->blocked, &ka->sa.sa_mask); if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(&tsk->blocked, sig); - recalc_sigpending(); - spin_unlock_irq(&tsk->sighand->siglock); + sigaddset(&blocked, sig); + set_current_blocked(&blocked); return 0; } diff --git a/arch/unicore32/kernel/time.c b/arch/unicore32/kernel/time.c index 080710c09241..d3824b2ff644 100644 --- a/arch/unicore32/kernel/time.c +++ b/arch/unicore32/kernel/time.c @@ -86,7 +86,7 @@ static struct clocksource cksrc_puv3_oscr = { static struct irqaction puv3_timer_irq = { .name = "ost0", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = puv3_ost0_interrupt, .dev_id = &ckevt_puv3_osmr0, }; diff --git a/arch/unicore32/mm/init.c b/arch/unicore32/mm/init.c index 3b379cddbc64..de186bde8975 100644 --- a/arch/unicore32/mm/init.c +++ b/arch/unicore32/mm/init.c @@ -26,6 +26,7 @@ #include <asm/setup.h> #include <asm/sizes.h> #include <asm/tlb.h> +#include <asm/memblock.h> #include <mach/map.h> #include "mm.h" @@ -245,7 +246,6 @@ void __init uc32_memblock_init(struct meminfo *mi) sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL); - memblock_init(); for (i = 0; i < mi->nr_banks; i++) memblock_add(mi->bank[i].start, mi->bank[i].size); @@ -264,7 +264,7 @@ void __init uc32_memblock_init(struct meminfo *mi) uc32_mm_memblock_reserve(); - memblock_analyze(); + memblock_allow_resize(); memblock_dump_all(); } diff --git a/arch/unicore32/mm/mmu.c b/arch/unicore32/mm/mmu.c index 3e5c3e5a0b45..43c20b40e444 100644 --- a/arch/unicore32/mm/mmu.c +++ b/arch/unicore32/mm/mmu.c @@ -25,6 +25,7 @@ #include <asm/setup.h> #include <asm/sizes.h> #include <asm/tlb.h> +#include <asm/memblock.h> #include <mach/map.h> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index cb9a1044a771..1a31254ceb83 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -26,6 +26,8 @@ config X86 select HAVE_IOREMAP_PROT select HAVE_KPROBES select HAVE_MEMBLOCK + select HAVE_MEMBLOCK_NODE_MAP + select ARCH_DISCARD_MEMBLOCK select ARCH_WANT_OPTIONAL_GPIOLIB select ARCH_WANT_FRAME_POINTERS select HAVE_DMA_ATTRS @@ -60,6 +62,7 @@ config X86 select ANON_INODES select HAVE_ARCH_KMEMCHECK select HAVE_USER_RETURN_NOTIFIER + select ARCH_BINFMT_ELF_RANDOMIZE_PIE select HAVE_ARCH_JUMP_LABEL select HAVE_TEXT_POKE_SMP select HAVE_GENERIC_HARDIRQS @@ -75,6 +78,7 @@ config X86 select HAVE_BPF_JIT if (X86_64 && NET) select CLKEVT_I8253 select ARCH_HAVE_NMI_SAFE_CMPXCHG + select GENERIC_IOMAP config INSTRUCTION_DECODER def_bool (KPROBES || PERF_EVENTS) @@ -140,9 +144,6 @@ config NEED_SG_DMA_LENGTH config GENERIC_ISA_DMA def_bool ISA_DMA_API -config GENERIC_IOMAP - def_bool y - config GENERIC_BUG def_bool y depends on BUG @@ -204,9 +205,6 @@ config ZONE_DMA32 bool default X86_64 -config ARCH_POPULATES_NODE_MAP - def_bool y - config AUDIT_ARCH bool default X86_64 @@ -343,6 +341,7 @@ config X86_EXTENDED_PLATFORM If you enable this option then you'll be able to select support for the following (non-PC) 64 bit x86 platforms: + Numascale NumaChip ScaleMP vSMP SGI Ultraviolet @@ -351,6 +350,18 @@ config X86_EXTENDED_PLATFORM endif # This is an alphabetically sorted list of 64 bit extended platforms # Please maintain the alphabetic order if and when there are additions +config X86_NUMACHIP + bool "Numascale NumaChip" + depends on X86_64 + depends on X86_EXTENDED_PLATFORM + depends on NUMA + depends on SMP + depends on X86_X2APIC + depends on !EDAC_AMD64 + ---help--- + Adds support for Numascale NumaChip large-SMP systems. Needed to + enable more than ~168 cores. + If you don't have one of these, you should say N here. config X86_VSMP bool "ScaleMP vSMP" @@ -390,7 +401,7 @@ config X86_INTEL_CE This option compiles in support for the CE4100 SOC for settop boxes and media devices. -config X86_INTEL_MID +config X86_WANT_INTEL_MID bool "Intel MID platform support" depends on X86_32 depends on X86_EXTENDED_PLATFORM @@ -399,7 +410,10 @@ config X86_INTEL_MID systems which do not have the PCI legacy interfaces (Moorestown, Medfield). If you are building for a PC class system say N here. -if X86_INTEL_MID +if X86_WANT_INTEL_MID + +config X86_INTEL_MID + bool config X86_MRST bool "Moorestown MID platform" @@ -411,6 +425,7 @@ config X86_MRST select SPI select INTEL_SCU_IPC select X86_PLATFORM_DEVICES + select X86_INTEL_MID ---help--- Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin Internet Device(MID) platform. Moorestown consists of two chips: @@ -1726,7 +1741,7 @@ source "drivers/sfi/Kconfig" config X86_APM_BOOT def_bool y - depends on APM || APM_MODULE + depends on APM menuconfig APM tristate "APM (Advanced Power Management) BIOS support" diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile index 3537d4b91f74..2b0b9631474b 100644 --- a/arch/x86/crypto/Makefile +++ b/arch/x86/crypto/Makefile @@ -5,12 +5,14 @@ obj-$(CONFIG_CRYPTO_AES_586) += aes-i586.o obj-$(CONFIG_CRYPTO_TWOFISH_586) += twofish-i586.o obj-$(CONFIG_CRYPTO_SALSA20_586) += salsa20-i586.o +obj-$(CONFIG_CRYPTO_SERPENT_SSE2_586) += serpent-sse2-i586.o obj-$(CONFIG_CRYPTO_AES_X86_64) += aes-x86_64.o obj-$(CONFIG_CRYPTO_BLOWFISH_X86_64) += blowfish-x86_64.o obj-$(CONFIG_CRYPTO_TWOFISH_X86_64) += twofish-x86_64.o obj-$(CONFIG_CRYPTO_TWOFISH_X86_64_3WAY) += twofish-x86_64-3way.o obj-$(CONFIG_CRYPTO_SALSA20_X86_64) += salsa20-x86_64.o +obj-$(CONFIG_CRYPTO_SERPENT_SSE2_X86_64) += serpent-sse2-x86_64.o obj-$(CONFIG_CRYPTO_AES_NI_INTEL) += aesni-intel.o obj-$(CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL) += ghash-clmulni-intel.o @@ -20,12 +22,14 @@ obj-$(CONFIG_CRYPTO_SHA1_SSSE3) += sha1-ssse3.o aes-i586-y := aes-i586-asm_32.o aes_glue.o twofish-i586-y := twofish-i586-asm_32.o twofish_glue.o salsa20-i586-y := salsa20-i586-asm_32.o salsa20_glue.o +serpent-sse2-i586-y := serpent-sse2-i586-asm_32.o serpent_sse2_glue.o aes-x86_64-y := aes-x86_64-asm_64.o aes_glue.o blowfish-x86_64-y := blowfish-x86_64-asm_64.o blowfish_glue.o twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_glue.o twofish-x86_64-3way-y := twofish-x86_64-asm_64-3way.o twofish_glue_3way.o salsa20-x86_64-y := salsa20-x86_64-asm_64.o salsa20_glue.o +serpent-sse2-x86_64-y := serpent-sse2-x86_64-asm_64.o serpent_sse2_glue.o aesni-intel-y := aesni-intel_asm.o aesni-intel_glue.o fpu.o diff --git a/arch/x86/crypto/serpent-sse2-i586-asm_32.S b/arch/x86/crypto/serpent-sse2-i586-asm_32.S new file mode 100644 index 000000000000..4e37677ca851 --- /dev/null +++ b/arch/x86/crypto/serpent-sse2-i586-asm_32.S @@ -0,0 +1,638 @@ +/* + * Serpent Cipher 4-way parallel algorithm (i586/SSE2) + * + * Copyright (C) 2011 Jussi Kivilinna <jussi.kivilinna@mbnet.fi> + * + * Based on crypto/serpent.c by + * Copyright (C) 2002 Dag Arne Osvik <osvik@ii.uib.no> + * 2003 Herbert Valerio Riedel <hvr@gnu.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + * + */ + +.file "serpent-sse2-i586-asm_32.S" +.text + +#define arg_ctx 4 +#define arg_dst 8 +#define arg_src 12 +#define arg_xor 16 + +/********************************************************************** + 4-way SSE2 serpent + **********************************************************************/ +#define CTX %edx + +#define RA %xmm0 +#define RB %xmm1 +#define RC %xmm2 +#define RD %xmm3 +#define RE %xmm4 + +#define RT0 %xmm5 +#define RT1 %xmm6 + +#define RNOT %xmm7 + +#define get_key(i, j, t) \ + movd (4*(i)+(j))*4(CTX), t; \ + pshufd $0, t, t; + +#define K(x0, x1, x2, x3, x4, i) \ + get_key(i, 0, x4); \ + get_key(i, 1, RT0); \ + get_key(i, 2, RT1); \ + pxor x4, x0; \ + pxor RT0, x1; \ + pxor RT1, x2; \ + get_key(i, 3, x4); \ + pxor x4, x3; + +#define LK(x0, x1, x2, x3, x4, i) \ + movdqa x0, x4; \ + pslld $13, x0; \ + psrld $(32 - 13), x4; \ + por x4, x0; \ + pxor x0, x1; \ + movdqa x2, x4; \ + pslld $3, x2; \ + psrld $(32 - 3), x4; \ + por x4, x2; \ + pxor x2, x1; \ + movdqa x1, x4; \ + pslld $1, x1; \ + psrld $(32 - 1), x4; \ + por x4, x1; \ + movdqa x0, x4; \ + pslld $3, x4; \ + pxor x2, x3; \ + pxor x4, x3; \ + movdqa x3, x4; \ + pslld $7, x3; \ + psrld $(32 - 7), x4; \ + por x4, x3; \ + movdqa x1, x4; \ + pslld $7, x4; \ + pxor x1, x0; \ + pxor x3, x0; \ + pxor x3, x2; \ + pxor x4, x2; \ + movdqa x0, x4; \ + get_key(i, 1, RT0); \ + pxor RT0, x1; \ + get_key(i, 3, RT0); \ + pxor RT0, x3; \ + pslld $5, x0; \ + psrld $(32 - 5), x4; \ + por x4, x0; \ + movdqa x2, x4; \ + pslld $22, x2; \ + psrld $(32 - 22), x4; \ + por x4, x2; \ + get_key(i, 0, RT0); \ + pxor RT0, x0; \ + get_key(i, 2, RT0); \ + pxor RT0, x2; + +#define KL(x0, x1, x2, x3, x4, i) \ + K(x0, x1, x2, x3, x4, i); \ + movdqa x0, x4; \ + psrld $5, x0; \ + pslld $(32 - 5), x4; \ + por x4, x0; \ + movdqa x2, x4; \ + psrld $22, x2; \ + pslld $(32 - 22), x4; \ + por x4, x2; \ + pxor x3, x2; \ + pxor x3, x0; \ + movdqa x1, x4; \ + pslld $7, x4; \ + pxor x1, x0; \ + pxor x4, x2; \ + movdqa x1, x4; \ + psrld $1, x1; \ + pslld $(32 - 1), x4; \ + por x4, x1; \ + movdqa x3, x4; \ + psrld $7, x3; \ + pslld $(32 - 7), x4; \ + por x4, x3; \ + pxor x0, x1; \ + movdqa x0, x4; \ + pslld $3, x4; \ + pxor x4, x3; \ + movdqa x0, x4; \ + psrld $13, x0; \ + pslld $(32 - 13), x4; \ + por x4, x0; \ + pxor x2, x1; \ + pxor x2, x3; \ + movdqa x2, x4; \ + psrld $3, x2; \ + pslld $(32 - 3), x4; \ + por x4, x2; + +#define S0(x0, x1, x2, x3, x4) \ + movdqa x3, x4; \ + por x0, x3; \ + pxor x4, x0; \ + pxor x2, x4; \ + pxor RNOT, x4; \ + pxor x1, x3; \ + pand x0, x1; \ + pxor x4, x1; \ + pxor x0, x2; \ + pxor x3, x0; \ + por x0, x4; \ + pxor x2, x0; \ + pand x1, x2; \ + pxor x2, x3; \ + pxor RNOT, x1; \ + pxor x4, x2; \ + pxor x2, x1; + +#define S1(x0, x1, x2, x3, x4) \ + movdqa x1, x4; \ + pxor x0, x1; \ + pxor x3, x0; \ + pxor RNOT, x3; \ + pand x1, x4; \ + por x1, x0; \ + pxor x2, x3; \ + pxor x3, x0; \ + pxor x3, x1; \ + pxor x4, x3; \ + por x4, x1; \ + pxor x2, x4; \ + pand x0, x2; \ + pxor x1, x2; \ + por x0, x1; \ + pxor RNOT, x0; \ + pxor x2, x0; \ + pxor x1, x4; + +#define S2(x0, x1, x2, x3, x4) \ + pxor RNOT, x3; \ + pxor x0, x1; \ + movdqa x0, x4; \ + pand x2, x0; \ + pxor x3, x0; \ + por x4, x3; \ + pxor x1, x2; \ + pxor x1, x3; \ + pand x0, x1; \ + pxor x2, x0; \ + pand x3, x2; \ + por x1, x3; \ + pxor RNOT, x0; \ + pxor x0, x3; \ + pxor x0, x4; \ + pxor x2, x0; \ + por x2, x1; + +#define S3(x0, x1, x2, x3, x4) \ + movdqa x1, x4; \ + pxor x3, x1; \ + por x0, x3; \ + pand x0, x4; \ + pxor x2, x0; \ + pxor x1, x2; \ + pand x3, x1; \ + pxor x3, x2; \ + por x4, x0; \ + pxor x3, x4; \ + pxor x0, x1; \ + pand x3, x0; \ + pand x4, x3; \ + pxor x2, x3; \ + por x1, x4; \ + pand x1, x2; \ + pxor x3, x4; \ + pxor x3, x0; \ + pxor x2, x3; + +#define S4(x0, x1, x2, x3, x4) \ + movdqa x3, x4; \ + pand x0, x3; \ + pxor x4, x0; \ + pxor x2, x3; \ + por x4, x2; \ + pxor x1, x0; \ + pxor x3, x4; \ + por x0, x2; \ + pxor x1, x2; \ + pand x0, x1; \ + pxor x4, x1; \ + pand x2, x4; \ + pxor x3, x2; \ + pxor x0, x4; \ + por x1, x3; \ + pxor RNOT, x1; \ + pxor x0, x3; + +#define S5(x0, x1, x2, x3, x4) \ + movdqa x1, x4; \ + por x0, x1; \ + pxor x1, x2; \ + pxor RNOT, x3; \ + pxor x0, x4; \ + pxor x2, x0; \ + pand x4, x1; \ + por x3, x4; \ + pxor x0, x4; \ + pand x3, x0; \ + pxor x3, x1; \ + pxor x2, x3; \ + pxor x1, x0; \ + pand x4, x2; \ + pxor x2, x1; \ + pand x0, x2; \ + pxor x2, x3; + +#define S6(x0, x1, x2, x3, x4) \ + movdqa x1, x4; \ + pxor x0, x3; \ + pxor x2, x1; \ + pxor x0, x2; \ + pand x3, x0; \ + por x3, x1; \ + pxor RNOT, x4; \ + pxor x1, x0; \ + pxor x2, x1; \ + pxor x4, x3; \ + pxor x0, x4; \ + pand x0, x2; \ + pxor x1, x4; \ + pxor x3, x2; \ + pand x1, x3; \ + pxor x0, x3; \ + pxor x2, x1; + +#define S7(x0, x1, x2, x3, x4) \ + pxor RNOT, x1; \ + movdqa x1, x4; \ + pxor RNOT, x0; \ + pand x2, x1; \ + pxor x3, x1; \ + por x4, x3; \ + pxor x2, x4; \ + pxor x3, x2; \ + pxor x0, x3; \ + por x1, x0; \ + pand x0, x2; \ + pxor x4, x0; \ + pxor x3, x4; \ + pand x0, x3; \ + pxor x1, x4; \ + pxor x4, x2; \ + pxor x1, x3; \ + por x0, x4; \ + pxor x1, x4; + +#define SI0(x0, x1, x2, x3, x4) \ + movdqa x3, x4; \ + pxor x0, x1; \ + por x1, x3; \ + pxor x1, x4; \ + pxor RNOT, x0; \ + pxor x3, x2; \ + pxor x0, x3; \ + pand x1, x0; \ + pxor x2, x0; \ + pand x3, x2; \ + pxor x4, x3; \ + pxor x3, x2; \ + pxor x3, x1; \ + pand x0, x3; \ + pxor x0, x1; \ + pxor x2, x0; \ + pxor x3, x4; + +#define SI1(x0, x1, x2, x3, x4) \ + pxor x3, x1; \ + movdqa x0, x4; \ + pxor x2, x0; \ + pxor RNOT, x2; \ + por x1, x4; \ + pxor x3, x4; \ + pand x1, x3; \ + pxor x2, x1; \ + pand x4, x2; \ + pxor x1, x4; \ + por x3, x1; \ + pxor x0, x3; \ + pxor x0, x2; \ + por x4, x0; \ + pxor x4, x2; \ + pxor x0, x1; \ + pxor x1, x4; + +#define SI2(x0, x1, x2, x3, x4) \ + pxor x1, x2; \ + movdqa x3, x4; \ + pxor RNOT, x3; \ + por x2, x3; \ + pxor x4, x2; \ + pxor x0, x4; \ + pxor x1, x3; \ + por x2, x1; \ + pxor x0, x2; \ + pxor x4, x1; \ + por x3, x4; \ + pxor x3, x2; \ + pxor x2, x4; \ + pand x1, x2; \ + pxor x3, x2; \ + pxor x4, x3; \ + pxor x0, x4; + +#define SI3(x0, x1, x2, x3, x4) \ + pxor x1, x2; \ + movdqa x1, x4; \ + pand x2, x1; \ + pxor x0, x1; \ + por x4, x0; \ + pxor x3, x4; \ + pxor x3, x0; \ + por x1, x3; \ + pxor x2, x1; \ + pxor x3, x1; \ + pxor x2, x0; \ + pxor x3, x2; \ + pand x1, x3; \ + pxor x0, x1; \ + pand x2, x0; \ + pxor x3, x4; \ + pxor x0, x3; \ + pxor x1, x0; + +#define SI4(x0, x1, x2, x3, x4) \ + pxor x3, x2; \ + movdqa x0, x4; \ + pand x1, x0; \ + pxor x2, x0; \ + por x3, x2; \ + pxor RNOT, x4; \ + pxor x0, x1; \ + pxor x2, x0; \ + pand x4, x2; \ + pxor x0, x2; \ + por x4, x0; \ + pxor x3, x0; \ + pand x2, x3; \ + pxor x3, x4; \ + pxor x1, x3; \ + pand x0, x1; \ + pxor x1, x4; \ + pxor x3, x0; + +#define SI5(x0, x1, x2, x3, x4) \ + movdqa x1, x4; \ + por x2, x1; \ + pxor x4, x2; \ + pxor x3, x1; \ + pand x4, x3; \ + pxor x3, x2; \ + por x0, x3; \ + pxor RNOT, x0; \ + pxor x2, x3; \ + por x0, x2; \ + pxor x1, x4; \ + pxor x4, x2; \ + pand x0, x4; \ + pxor x1, x0; \ + pxor x3, x1; \ + pand x2, x0; \ + pxor x3, x2; \ + pxor x2, x0; \ + pxor x4, x2; \ + pxor x3, x4; + +#define SI6(x0, x1, x2, x3, x4) \ + pxor x2, x0; \ + movdqa x0, x4; \ + pand x3, x0; \ + pxor x3, x2; \ + pxor x2, x0; \ + pxor x1, x3; \ + por x4, x2; \ + pxor x3, x2; \ + pand x0, x3; \ + pxor RNOT, x0; \ + pxor x1, x3; \ + pand x2, x1; \ + pxor x0, x4; \ + pxor x4, x3; \ + pxor x2, x4; \ + pxor x1, x0; \ + pxor x0, x2; + +#define SI7(x0, x1, x2, x3, x4) \ + movdqa x3, x4; \ + pand x0, x3; \ + pxor x2, x0; \ + por x4, x2; \ + pxor x1, x4; \ + pxor RNOT, x0; \ + por x3, x1; \ + pxor x0, x4; \ + pand x2, x0; \ + pxor x1, x0; \ + pand x2, x1; \ + pxor x2, x3; \ + pxor x3, x4; \ + pand x3, x2; \ + por x0, x3; \ + pxor x4, x1; \ + pxor x4, x3; \ + pand x0, x4; \ + pxor x2, x4; + +#define transpose_4x4(x0, x1, x2, x3, t1, t2, t3) \ + movdqa x2, t3; \ + movdqa x0, t1; \ + unpcklps x3, t3; \ + movdqa x0, t2; \ + unpcklps x1, t1; \ + unpckhps x1, t2; \ + movdqa t3, x1; \ + unpckhps x3, x2; \ + movdqa t1, x0; \ + movhlps t1, x1; \ + movdqa t2, t1; \ + movlhps t3, x0; \ + movlhps x2, t1; \ + movhlps t2, x2; \ + movdqa x2, x3; \ + movdqa t1, x2; + +#define read_blocks(in, x0, x1, x2, x3, t0, t1, t2) \ + movdqu (0*4*4)(in), x0; \ + movdqu (1*4*4)(in), x1; \ + movdqu (2*4*4)(in), x2; \ + movdqu (3*4*4)(in), x3; \ + \ + transpose_4x4(x0, x1, x2, x3, t0, t1, t2) + +#define write_blocks(out, x0, x1, x2, x3, t0, t1, t2) \ + transpose_4x4(x0, x1, x2, x3, t0, t1, t2) \ + \ + movdqu x0, (0*4*4)(out); \ + movdqu x1, (1*4*4)(out); \ + movdqu x2, (2*4*4)(out); \ + movdqu x3, (3*4*4)(out); + +#define xor_blocks(out, x0, x1, x2, x3, t0, t1, t2) \ + transpose_4x4(x0, x1, x2, x3, t0, t1, t2) \ + \ + movdqu (0*4*4)(out), t0; \ + pxor t0, x0; \ + movdqu x0, (0*4*4)(out); \ + movdqu (1*4*4)(out), t0; \ + pxor t0, x1; \ + movdqu x1, (1*4*4)(out); \ + movdqu (2*4*4)(out), t0; \ + pxor t0, x2; \ + movdqu x2, (2*4*4)(out); \ + movdqu (3*4*4)(out), t0; \ + pxor t0, x3; \ + movdqu x3, (3*4*4)(out); + +.align 8 +.global __serpent_enc_blk_4way +.type __serpent_enc_blk_4way,@function; + +__serpent_enc_blk_4way: + /* input: + * arg_ctx(%esp): ctx, CTX + * arg_dst(%esp): dst + * arg_src(%esp): src + * arg_xor(%esp): bool, if true: xor output + */ + + pcmpeqd RNOT, RNOT; + + movl arg_ctx(%esp), CTX; + + movl arg_src(%esp), %eax; + read_blocks(%eax, RA, RB, RC, RD, RT0, RT1, RE); + + K(RA, RB, RC, RD, RE, 0); + S0(RA, RB, RC, RD, RE); LK(RC, RB, RD, RA, RE, 1); + S1(RC, RB, RD, RA, RE); LK(RE, RD, RA, RC, RB, 2); + S2(RE, RD, RA, RC, RB); LK(RB, RD, RE, RC, RA, 3); + S3(RB, RD, RE, RC, RA); LK(RC, RA, RD, RB, RE, 4); + S4(RC, RA, RD, RB, RE); LK(RA, RD, RB, RE, RC, 5); + S5(RA, RD, RB, RE, RC); LK(RC, RA, RD, RE, RB, 6); + S6(RC, RA, RD, RE, RB); LK(RD, RB, RA, RE, RC, 7); + S7(RD, RB, RA, RE, RC); LK(RC, RA, RE, RD, RB, 8); + S0(RC, RA, RE, RD, RB); LK(RE, RA, RD, RC, RB, 9); + S1(RE, RA, RD, RC, RB); LK(RB, RD, RC, RE, RA, 10); + S2(RB, RD, RC, RE, RA); LK(RA, RD, RB, RE, RC, 11); + S3(RA, RD, RB, RE, RC); LK(RE, RC, RD, RA, RB, 12); + S4(RE, RC, RD, RA, RB); LK(RC, RD, RA, RB, RE, 13); + S5(RC, RD, RA, RB, RE); LK(RE, RC, RD, RB, RA, 14); + S6(RE, RC, RD, RB, RA); LK(RD, RA, RC, RB, RE, 15); + S7(RD, RA, RC, RB, RE); LK(RE, RC, RB, RD, RA, 16); + S0(RE, RC, RB, RD, RA); LK(RB, RC, RD, RE, RA, 17); + S1(RB, RC, RD, RE, RA); LK(RA, RD, RE, RB, RC, 18); + S2(RA, RD, RE, RB, RC); LK(RC, RD, RA, RB, RE, 19); + S3(RC, RD, RA, RB, RE); LK(RB, RE, RD, RC, RA, 20); + S4(RB, RE, RD, RC, RA); LK(RE, RD, RC, RA, RB, 21); + S5(RE, RD, RC, RA, RB); LK(RB, RE, RD, RA, RC, 22); + S6(RB, RE, RD, RA, RC); LK(RD, RC, RE, RA, RB, 23); + S7(RD, RC, RE, RA, RB); LK(RB, RE, RA, RD, RC, 24); + S0(RB, RE, RA, RD, RC); LK(RA, RE, RD, RB, RC, 25); + S1(RA, RE, RD, RB, RC); LK(RC, RD, RB, RA, RE, 26); + S2(RC, RD, RB, RA, RE); LK(RE, RD, RC, RA, RB, 27); + S3(RE, RD, RC, RA, RB); LK(RA, RB, RD, RE, RC, 28); + S4(RA, RB, RD, RE, RC); LK(RB, RD, RE, RC, RA, 29); + S5(RB, RD, RE, RC, RA); LK(RA, RB, RD, RC, RE, 30); + S6(RA, RB, RD, RC, RE); LK(RD, RE, RB, RC, RA, 31); + S7(RD, RE, RB, RC, RA); K(RA, RB, RC, RD, RE, 32); + + movl arg_dst(%esp), %eax; + + cmpb $0, arg_xor(%esp); + jnz __enc_xor4; + + write_blocks(%eax, RA, RB, RC, RD, RT0, RT1, RE); + + ret; + +__enc_xor4: + xor_blocks(%eax, RA, RB, RC, RD, RT0, RT1, RE); + + ret; + +.align 8 +.global serpent_dec_blk_4way +.type serpent_dec_blk_4way,@function; + +serpent_dec_blk_4way: + /* input: + * arg_ctx(%esp): ctx, CTX + * arg_dst(%esp): dst + * arg_src(%esp): src + */ + + pcmpeqd RNOT, RNOT; + + movl arg_ctx(%esp), CTX; + + movl arg_src(%esp), %eax; + read_blocks(%eax, RA, RB, RC, RD, RT0, RT1, RE); + + K(RA, RB, RC, RD, RE, 32); + SI7(RA, RB, RC, RD, RE); KL(RB, RD, RA, RE, RC, 31); + SI6(RB, RD, RA, RE, RC); KL(RA, RC, RE, RB, RD, 30); + SI5(RA, RC, RE, RB, RD); KL(RC, RD, RA, RE, RB, 29); + SI4(RC, RD, RA, RE, RB); KL(RC, RA, RB, RE, RD, 28); + SI3(RC, RA, RB, RE, RD); KL(RB, RC, RD, RE, RA, 27); + SI2(RB, RC, RD, RE, RA); KL(RC, RA, RE, RD, RB, 26); + SI1(RC, RA, RE, RD, RB); KL(RB, RA, RE, RD, RC, 25); + SI0(RB, RA, RE, RD, RC); KL(RE, RC, RA, RB, RD, 24); + SI7(RE, RC, RA, RB, RD); KL(RC, RB, RE, RD, RA, 23); + SI6(RC, RB, RE, RD, RA); KL(RE, RA, RD, RC, RB, 22); + SI5(RE, RA, RD, RC, RB); KL(RA, RB, RE, RD, RC, 21); + SI4(RA, RB, RE, RD, RC); KL(RA, RE, RC, RD, RB, 20); + SI3(RA, RE, RC, RD, RB); KL(RC, RA, RB, RD, RE, 19); + SI2(RC, RA, RB, RD, RE); KL(RA, RE, RD, RB, RC, 18); + SI1(RA, RE, RD, RB, RC); KL(RC, RE, RD, RB, RA, 17); + SI0(RC, RE, RD, RB, RA); KL(RD, RA, RE, RC, RB, 16); + SI7(RD, RA, RE, RC, RB); KL(RA, RC, RD, RB, RE, 15); + SI6(RA, RC, RD, RB, RE); KL(RD, RE, RB, RA, RC, 14); + SI5(RD, RE, RB, RA, RC); KL(RE, RC, RD, RB, RA, 13); + SI4(RE, RC, RD, RB, RA); KL(RE, RD, RA, RB, RC, 12); + SI3(RE, RD, RA, RB, RC); KL(RA, RE, RC, RB, RD, 11); + SI2(RA, RE, RC, RB, RD); KL(RE, RD, RB, RC, RA, 10); + SI1(RE, RD, RB, RC, RA); KL(RA, RD, RB, RC, RE, 9); + SI0(RA, RD, RB, RC, RE); KL(RB, RE, RD, RA, RC, 8); + SI7(RB, RE, RD, RA, RC); KL(RE, RA, RB, RC, RD, 7); + SI6(RE, RA, RB, RC, RD); KL(RB, RD, RC, RE, RA, 6); + SI5(RB, RD, RC, RE, RA); KL(RD, RA, RB, RC, RE, 5); + SI4(RD, RA, RB, RC, RE); KL(RD, RB, RE, RC, RA, 4); + SI3(RD, RB, RE, RC, RA); KL(RE, RD, RA, RC, RB, 3); + SI2(RE, RD, RA, RC, RB); KL(RD, RB, RC, RA, RE, 2); + SI1(RD, RB, RC, RA, RE); KL(RE, RB, RC, RA, RD, 1); + SI0(RE, RB, RC, RA, RD); K(RC, RD, RB, RE, RA, 0); + + movl arg_dst(%esp), %eax; + write_blocks(%eax, RC, RD, RB, RE, RT0, RT1, RA); + + ret; diff --git a/arch/x86/crypto/serpent-sse2-x86_64-asm_64.S b/arch/x86/crypto/serpent-sse2-x86_64-asm_64.S new file mode 100644 index 000000000000..7f24a1540821 --- /dev/null +++ b/arch/x86/crypto/serpent-sse2-x86_64-asm_64.S @@ -0,0 +1,761 @@ +/* + * Serpent Cipher 8-way parallel algorithm (x86_64/SSE2) + * + * Copyright (C) 2011 Jussi Kivilinna <jussi.kivilinna@mbnet.fi> + * + * Based on crypto/serpent.c by + * Copyright (C) 2002 Dag Arne Osvik <osvik@ii.uib.no> + * 2003 Herbert Valerio Riedel <hvr@gnu.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + * + */ + +.file "serpent-sse2-x86_64-asm_64.S" +.text + +#define CTX %rdi + +/********************************************************************** + 8-way SSE2 serpent + **********************************************************************/ +#define RA1 %xmm0 +#define RB1 %xmm1 +#define RC1 %xmm2 +#define RD1 %xmm3 +#define RE1 %xmm4 + +#define RA2 %xmm5 +#define RB2 %xmm6 +#define RC2 %xmm7 +#define RD2 %xmm8 +#define RE2 %xmm9 + +#define RNOT %xmm10 + +#define RK0 %xmm11 +#define RK1 %xmm12 +#define RK2 %xmm13 +#define RK3 %xmm14 + +#define S0_1(x0, x1, x2, x3, x4) \ + movdqa x3, x4; \ + por x0, x3; \ + pxor x4, x0; \ + pxor x2, x4; \ + pxor RNOT, x4; \ + pxor x1, x3; \ + pand x0, x1; \ + pxor x4, x1; \ + pxor x0, x2; +#define S0_2(x0, x1, x2, x3, x4) \ + pxor x3, x0; \ + por x0, x4; \ + pxor x2, x0; \ + pand x1, x2; \ + pxor x2, x3; \ + pxor RNOT, x1; \ + pxor x4, x2; \ + pxor x2, x1; + +#define S1_1(x0, x1, x2, x3, x4) \ + movdqa x1, x4; \ + pxor x0, x1; \ + pxor x3, x0; \ + pxor RNOT, x3; \ + pand x1, x4; \ + por x1, x0; \ + pxor x2, x3; \ + pxor x3, x0; \ + pxor x3, x1; +#define S1_2(x0, x1, x2, x3, x4) \ + pxor x4, x3; \ + por x4, x1; \ + pxor x2, x4; \ + pand x0, x2; \ + pxor x1, x2; \ + por x0, x1; \ + pxor RNOT, x0; \ + pxor x2, x0; \ + pxor x1, x4; + +#define S2_1(x0, x1, x2, x3, x4) \ + pxor RNOT, x3; \ + pxor x0, x1; \ + movdqa x0, x4; \ + pand x2, x0; \ + pxor x3, x0; \ + por x4, x3; \ + pxor x1, x2; \ + pxor x1, x3; \ + pand x0, x1; +#define S2_2(x0, x1, x2, x3, x4) \ + pxor x2, x0; \ + pand x3, x2; \ + por x1, x3; \ + pxor RNOT, x0; \ + pxor x0, x3; \ + pxor x0, x4; \ + pxor x2, x0; \ + por x2, x1; + +#define S3_1(x0, x1, x2, x3, x4) \ + movdqa x1, x4; \ + pxor x3, x1; \ + por x0, x3; \ + pand x0, x4; \ + pxor x2, x0; \ + pxor x1, x2; \ + pand x3, x1; \ + pxor x3, x2; \ + por x4, x0; \ + pxor x3, x4; +#define S3_2(x0, x1, x2, x3, x4) \ + pxor x0, x1; \ + pand x3, x0; \ + pand x4, x3; \ + pxor x2, x3; \ + por x1, x4; \ + pand x1, x2; \ + pxor x3, x4; \ + pxor x3, x0; \ + pxor x2, x3; + +#define S4_1(x0, x1, x2, x3, x4) \ + movdqa x3, x4; \ + pand x0, x3; \ + pxor x4, x0; \ + pxor x2, x3; \ + por x4, x2; \ + pxor x1, x0; \ + pxor x3, x4; \ + por x0, x2; \ + pxor x1, x2; +#define S4_2(x0, x1, x2, x3, x4) \ + pand x0, x1; \ + pxor x4, x1; \ + pand x2, x4; \ + pxor x3, x2; \ + pxor x0, x4; \ + por x1, x3; \ + pxor RNOT, x1; \ + pxor x0, x3; + +#define S5_1(x0, x1, x2, x3, x4) \ + movdqa x1, x4; \ + por x0, x1; \ + pxor x1, x2; \ + pxor RNOT, x3; \ + pxor x0, x4; \ + pxor x2, x0; \ + pand x4, x1; \ + por x3, x4; \ + pxor x0, x4; +#define S5_2(x0, x1, x2, x3, x4) \ + pand x3, x0; \ + pxor x3, x1; \ + pxor x2, x3; \ + pxor x1, x0; \ + pand x4, x2; \ + pxor x2, x1; \ + pand x0, x2; \ + pxor x2, x3; + +#define S6_1(x0, x1, x2, x3, x4) \ + movdqa x1, x4; \ + pxor x0, x3; \ + pxor x2, x1; \ + pxor x0, x2; \ + pand x3, x0; \ + por x3, x1; \ + pxor RNOT, x4; \ + pxor x1, x0; \ + pxor x2, x1; +#define S6_2(x0, x1, x2, x3, x4) \ + pxor x4, x3; \ + pxor x0, x4; \ + pand x0, x2; \ + pxor x1, x4; \ + pxor x3, x2; \ + pand x1, x3; \ + pxor x0, x3; \ + pxor x2, x1; + +#define S7_1(x0, x1, x2, x3, x4) \ + pxor RNOT, x1; \ + movdqa x1, x4; \ + pxor RNOT, x0; \ + pand x2, x1; \ + pxor x3, x1; \ + por x4, x3; \ + pxor x2, x4; \ + pxor x3, x2; \ + pxor x0, x3; \ + por x1, x0; +#define S7_2(x0, x1, x2, x3, x4) \ + pand x0, x2; \ + pxor x4, x0; \ + pxor x3, x4; \ + pand x0, x3; \ + pxor x1, x4; \ + pxor x4, x2; \ + pxor x1, x3; \ + por x0, x4; \ + pxor x1, x4; + +#define SI0_1(x0, x1, x2, x3, x4) \ + movdqa x3, x4; \ + pxor x0, x1; \ + por x1, x3; \ + pxor x1, x4; \ + pxor RNOT, x0; \ + pxor x3, x2; \ + pxor x0, x3; \ + pand x1, x0; \ + pxor x2, x0; +#define SI0_2(x0, x1, x2, x3, x4) \ + pand x3, x2; \ + pxor x4, x3; \ + pxor x3, x2; \ + pxor x3, x1; \ + pand x0, x3; \ + pxor x0, x1; \ + pxor x2, x0; \ + pxor x3, x4; + +#define SI1_1(x0, x1, x2, x3, x4) \ + pxor x3, x1; \ + movdqa x0, x4; \ + pxor x2, x0; \ + pxor RNOT, x2; \ + por x1, x4; \ + pxor x3, x4; \ + pand x1, x3; \ + pxor x2, x1; \ + pand x4, x2; +#define SI1_2(x0, x1, x2, x3, x4) \ + pxor x1, x4; \ + por x3, x1; \ + pxor x0, x3; \ + pxor x0, x2; \ + por x4, x0; \ + pxor x4, x2; \ + pxor x0, x1; \ + pxor x1, x4; + +#define SI2_1(x0, x1, x2, x3, x4) \ + pxor x1, x2; \ + movdqa x3, x4; \ + pxor RNOT, x3; \ + por x2, x3; \ + pxor x4, x2; \ + pxor x0, x4; \ + pxor x1, x3; \ + por x2, x1; \ + pxor x0, x2; +#define SI2_2(x0, x1, x2, x3, x4) \ + pxor x4, x1; \ + por x3, x4; \ + pxor x3, x2; \ + pxor x2, x4; \ + pand x1, x2; \ + pxor x3, x2; \ + pxor x4, x3; \ + pxor x0, x4; + +#define SI3_1(x0, x1, x2, x3, x4) \ + pxor x1, x2; \ + movdqa x1, x4; \ + pand x2, x1; \ + pxor x0, x1; \ + por x4, x0; \ + pxor x3, x4; \ + pxor x3, x0; \ + por x1, x3; \ + pxor x2, x1; +#define SI3_2(x0, x1, x2, x3, x4) \ + pxor x3, x1; \ + pxor x2, x0; \ + pxor x3, x2; \ + pand x1, x3; \ + pxor x0, x1; \ + pand x2, x0; \ + pxor x3, x4; \ + pxor x0, x3; \ + pxor x1, x0; + +#define SI4_1(x0, x1, x2, x3, x4) \ + pxor x3, x2; \ + movdqa x0, x4; \ + pand x1, x0; \ + pxor x2, x0; \ + por x3, x2; \ + pxor RNOT, x4; \ + pxor x0, x1; \ + pxor x2, x0; \ + pand x4, x2; +#define SI4_2(x0, x1, x2, x3, x4) \ + pxor x0, x2; \ + por x4, x0; \ + pxor x3, x0; \ + pand x2, x3; \ + pxor x3, x4; \ + pxor x1, x3; \ + pand x0, x1; \ + pxor x1, x4; \ + pxor x3, x0; + +#define SI5_1(x0, x1, x2, x3, x4) \ + movdqa x1, x4; \ + por x2, x1; \ + pxor x4, x2; \ + pxor x3, x1; \ + pand x4, x3; \ + pxor x3, x2; \ + por x0, x3; \ + pxor RNOT, x0; \ + pxor x2, x3; \ + por x0, x2; +#define SI5_2(x0, x1, x2, x3, x4) \ + pxor x1, x4; \ + pxor x4, x2; \ + pand x0, x4; \ + pxor x1, x0; \ + pxor x3, x1; \ + pand x2, x0; \ + pxor x3, x2; \ + pxor x2, x0; \ + pxor x4, x2; \ + pxor x3, x4; + +#define SI6_1(x0, x1, x2, x3, x4) \ + pxor x2, x0; \ + movdqa x0, x4; \ + pand x3, x0; \ + pxor x3, x2; \ + pxor x2, x0; \ + pxor x1, x3; \ + por x4, x2; \ + pxor x3, x2; \ + pand x0, x3; +#define SI6_2(x0, x1, x2, x3, x4) \ + pxor RNOT, x0; \ + pxor x1, x3; \ + pand x2, x1; \ + pxor x0, x4; \ + pxor x4, x3; \ + pxor x2, x4; \ + pxor x1, x0; \ + pxor x0, x2; + +#define SI7_1(x0, x1, x2, x3, x4) \ + movdqa x3, x4; \ + pand x0, x3; \ + pxor x2, x0; \ + por x4, x2; \ + pxor x1, x4; \ + pxor RNOT, x0; \ + por x3, x1; \ + pxor x0, x4; \ + pand x2, x0; \ + pxor x1, x0; +#define SI7_2(x0, x1, x2, x3, x4) \ + pand x2, x1; \ + pxor x2, x3; \ + pxor x3, x4; \ + pand x3, x2; \ + por x0, x3; \ + pxor x4, x1; \ + pxor x4, x3; \ + pand x0, x4; \ + pxor x2, x4; + +#define get_key(i, j, t) \ + movd (4*(i)+(j))*4(CTX), t; \ + pshufd $0, t, t; + +#define K2(x0, x1, x2, x3, x4, i) \ + get_key(i, 0, RK0); \ + get_key(i, 1, RK1); \ + get_key(i, 2, RK2); \ + get_key(i, 3, RK3); \ + pxor RK0, x0 ## 1; \ + pxor RK1, x1 ## 1; \ + pxor RK2, x2 ## 1; \ + pxor RK3, x3 ## 1; \ + pxor RK0, x0 ## 2; \ + pxor RK1, x1 ## 2; \ + pxor RK2, x2 ## 2; \ + pxor RK3, x3 ## 2; + +#define LK2(x0, x1, x2, x3, x4, i) \ + movdqa x0 ## 1, x4 ## 1; \ + pslld $13, x0 ## 1; \ + psrld $(32 - 13), x4 ## 1; \ + por x4 ## 1, x0 ## 1; \ + pxor x0 ## 1, x1 ## 1; \ + movdqa x2 ## 1, x4 ## 1; \ + pslld $3, x2 ## 1; \ + psrld $(32 - 3), x4 ## 1; \ + por x4 ## 1, x2 ## 1; \ + pxor x2 ## 1, x1 ## 1; \ + movdqa x0 ## 2, x4 ## 2; \ + pslld $13, x0 ## 2; \ + psrld $(32 - 13), x4 ## 2; \ + por x4 ## 2, x0 ## 2; \ + pxor x0 ## 2, x1 ## 2; \ + movdqa x2 ## 2, x4 ## 2; \ + pslld $3, x2 ## 2; \ + psrld $(32 - 3), x4 ## 2; \ + por x4 ## 2, x2 ## 2; \ + pxor x2 ## 2, x1 ## 2; \ + movdqa x1 ## 1, x4 ## 1; \ + pslld $1, x1 ## 1; \ + psrld $(32 - 1), x4 ## 1; \ + por x4 ## 1, x1 ## 1; \ + movdqa x0 ## 1, x4 ## 1; \ + pslld $3, x4 ## 1; \ + pxor x2 ## 1, x3 ## 1; \ + pxor x4 ## 1, x3 ## 1; \ + movdqa x3 ## 1, x4 ## 1; \ + get_key(i, 1, RK1); \ + movdqa x1 ## 2, x4 ## 2; \ + pslld $1, x1 ## 2; \ + psrld $(32 - 1), x4 ## 2; \ + por x4 ## 2, x1 ## 2; \ + movdqa x0 ## 2, x4 ## 2; \ + pslld $3, x4 ## 2; \ + pxor x2 ## 2, x3 ## 2; \ + pxor x4 ## 2, x3 ## 2; \ + movdqa x3 ## 2, x4 ## 2; \ + get_key(i, 3, RK3); \ + pslld $7, x3 ## 1; \ + psrld $(32 - 7), x4 ## 1; \ + por x4 ## 1, x3 ## 1; \ + movdqa x1 ## 1, x4 ## 1; \ + pslld $7, x4 ## 1; \ + pxor x1 ## 1, x0 ## 1; \ + pxor x3 ## 1, x0 ## 1; \ + pxor x3 ## 1, x2 ## 1; \ + pxor x4 ## 1, x2 ## 1; \ + get_key(i, 0, RK0); \ + pslld $7, x3 ## 2; \ + psrld $(32 - 7), x4 ## 2; \ + por x4 ## 2, x3 ## 2; \ + movdqa x1 ## 2, x4 ## 2; \ + pslld $7, x4 ## 2; \ + pxor x1 ## 2, x0 ## 2; \ + pxor x3 ## 2, x0 ## 2; \ + pxor x3 ## 2, x2 ## 2; \ + pxor x4 ## 2, x2 ## 2; \ + get_key(i, 2, RK2); \ + pxor RK1, x1 ## 1; \ + pxor RK3, x3 ## 1; \ + movdqa x0 ## 1, x4 ## 1; \ + pslld $5, x0 ## 1; \ + psrld $(32 - 5), x4 ## 1; \ + por x4 ## 1, x0 ## 1; \ + movdqa x2 ## 1, x4 ## 1; \ + pslld $22, x2 ## 1; \ + psrld $(32 - 22), x4 ## 1; \ + por x4 ## 1, x2 ## 1; \ + pxor RK0, x0 ## 1; \ + pxor RK2, x2 ## 1; \ + pxor RK1, x1 ## 2; \ + pxor RK3, x3 ## 2; \ + movdqa x0 ## 2, x4 ## 2; \ + pslld $5, x0 ## 2; \ + psrld $(32 - 5), x4 ## 2; \ + por x4 ## 2, x0 ## 2; \ + movdqa x2 ## 2, x4 ## 2; \ + pslld $22, x2 ## 2; \ + psrld $(32 - 22), x4 ## 2; \ + por x4 ## 2, x2 ## 2; \ + pxor RK0, x0 ## 2; \ + pxor RK2, x2 ## 2; + +#define KL2(x0, x1, x2, x3, x4, i) \ + pxor RK0, x0 ## 1; \ + pxor RK2, x2 ## 1; \ + movdqa x0 ## 1, x4 ## 1; \ + psrld $5, x0 ## 1; \ + pslld $(32 - 5), x4 ## 1; \ + por x4 ## 1, x0 ## 1; \ + pxor RK3, x3 ## 1; \ + pxor RK1, x1 ## 1; \ + movdqa x2 ## 1, x4 ## 1; \ + psrld $22, x2 ## 1; \ + pslld $(32 - 22), x4 ## 1; \ + por x4 ## 1, x2 ## 1; \ + pxor x3 ## 1, x2 ## 1; \ + pxor RK0, x0 ## 2; \ + pxor RK2, x2 ## 2; \ + movdqa x0 ## 2, x4 ## 2; \ + psrld $5, x0 ## 2; \ + pslld $(32 - 5), x4 ## 2; \ + por x4 ## 2, x0 ## 2; \ + pxor RK3, x3 ## 2; \ + pxor RK1, x1 ## 2; \ + movdqa x2 ## 2, x4 ## 2; \ + psrld $22, x2 ## 2; \ + pslld $(32 - 22), x4 ## 2; \ + por x4 ## 2, x2 ## 2; \ + pxor x3 ## 2, x2 ## 2; \ + pxor x3 ## 1, x0 ## 1; \ + movdqa x1 ## 1, x4 ## 1; \ + pslld $7, x4 ## 1; \ + pxor x1 ## 1, x0 ## 1; \ + pxor x4 ## 1, x2 ## 1; \ + movdqa x1 ## 1, x4 ## 1; \ + psrld $1, x1 ## 1; \ + pslld $(32 - 1), x4 ## 1; \ + por x4 ## 1, x1 ## 1; \ + pxor x3 ## 2, x0 ## 2; \ + movdqa x1 ## 2, x4 ## 2; \ + pslld $7, x4 ## 2; \ + pxor x1 ## 2, x0 ## 2; \ + pxor x4 ## 2, x2 ## 2; \ + movdqa x1 ## 2, x4 ## 2; \ + psrld $1, x1 ## 2; \ + pslld $(32 - 1), x4 ## 2; \ + por x4 ## 2, x1 ## 2; \ + movdqa x3 ## 1, x4 ## 1; \ + psrld $7, x3 ## 1; \ + pslld $(32 - 7), x4 ## 1; \ + por x4 ## 1, x3 ## 1; \ + pxor x0 ## 1, x1 ## 1; \ + movdqa x0 ## 1, x4 ## 1; \ + pslld $3, x4 ## 1; \ + pxor x4 ## 1, x3 ## 1; \ + movdqa x0 ## 1, x4 ## 1; \ + movdqa x3 ## 2, x4 ## 2; \ + psrld $7, x3 ## 2; \ + pslld $(32 - 7), x4 ## 2; \ + por x4 ## 2, x3 ## 2; \ + pxor x0 ## 2, x1 ## 2; \ + movdqa x0 ## 2, x4 ## 2; \ + pslld $3, x4 ## 2; \ + pxor x4 ## 2, x3 ## 2; \ + movdqa x0 ## 2, x4 ## 2; \ + psrld $13, x0 ## 1; \ + pslld $(32 - 13), x4 ## 1; \ + por x4 ## 1, x0 ## 1; \ + pxor x2 ## 1, x1 ## 1; \ + pxor x2 ## 1, x3 ## 1; \ + movdqa x2 ## 1, x4 ## 1; \ + psrld $3, x2 ## 1; \ + pslld $(32 - 3), x4 ## 1; \ + por x4 ## 1, x2 ## 1; \ + psrld $13, x0 ## 2; \ + pslld $(32 - 13), x4 ## 2; \ + por x4 ## 2, x0 ## 2; \ + pxor x2 ## 2, x1 ## 2; \ + pxor x2 ## 2, x3 ## 2; \ + movdqa x2 ## 2, x4 ## 2; \ + psrld $3, x2 ## 2; \ + pslld $(32 - 3), x4 ## 2; \ + por x4 ## 2, x2 ## 2; + +#define S(SBOX, x0, x1, x2, x3, x4) \ + SBOX ## _1(x0 ## 1, x1 ## 1, x2 ## 1, x3 ## 1, x4 ## 1); \ + SBOX ## _2(x0 ## 1, x1 ## 1, x2 ## 1, x3 ## 1, x4 ## 1); \ + SBOX ## _1(x0 ## 2, x1 ## 2, x2 ## 2, x3 ## 2, x4 ## 2); \ + SBOX ## _2(x0 ## 2, x1 ## 2, x2 ## 2, x3 ## 2, x4 ## 2); + +#define SP(SBOX, x0, x1, x2, x3, x4, i) \ + get_key(i, 0, RK0); \ + SBOX ## _1(x0 ## 1, x1 ## 1, x2 ## 1, x3 ## 1, x4 ## 1); \ + get_key(i, 2, RK2); \ + SBOX ## _1(x0 ## 2, x1 ## 2, x2 ## 2, x3 ## 2, x4 ## 2); \ + get_key(i, 3, RK3); \ + SBOX ## _2(x0 ## 1, x1 ## 1, x2 ## 1, x3 ## 1, x4 ## 1); \ + get_key(i, 1, RK1); \ + SBOX ## _2(x0 ## 2, x1 ## 2, x2 ## 2, x3 ## 2, x4 ## 2); \ + +#define transpose_4x4(x0, x1, x2, x3, t1, t2, t3) \ + movdqa x2, t3; \ + movdqa x0, t1; \ + unpcklps x3, t3; \ + movdqa x0, t2; \ + unpcklps x1, t1; \ + unpckhps x1, t2; \ + movdqa t3, x1; \ + unpckhps x3, x2; \ + movdqa t1, x0; \ + movhlps t1, x1; \ + movdqa t2, t1; \ + movlhps t3, x0; \ + movlhps x2, t1; \ + movhlps t2, x2; \ + movdqa x2, x3; \ + movdqa t1, x2; + +#define read_blocks(in, x0, x1, x2, x3, t0, t1, t2) \ + movdqu (0*4*4)(in), x0; \ + movdqu (1*4*4)(in), x1; \ + movdqu (2*4*4)(in), x2; \ + movdqu (3*4*4)(in), x3; \ + \ + transpose_4x4(x0, x1, x2, x3, t0, t1, t2) + +#define write_blocks(out, x0, x1, x2, x3, t0, t1, t2) \ + transpose_4x4(x0, x1, x2, x3, t0, t1, t2) \ + \ + movdqu x0, (0*4*4)(out); \ + movdqu x1, (1*4*4)(out); \ + movdqu x2, (2*4*4)(out); \ + movdqu x3, (3*4*4)(out); + +#define xor_blocks(out, x0, x1, x2, x3, t0, t1, t2) \ + transpose_4x4(x0, x1, x2, x3, t0, t1, t2) \ + \ + movdqu (0*4*4)(out), t0; \ + pxor t0, x0; \ + movdqu x0, (0*4*4)(out); \ + movdqu (1*4*4)(out), t0; \ + pxor t0, x1; \ + movdqu x1, (1*4*4)(out); \ + movdqu (2*4*4)(out), t0; \ + pxor t0, x2; \ + movdqu x2, (2*4*4)(out); \ + movdqu (3*4*4)(out), t0; \ + pxor t0, x3; \ + movdqu x3, (3*4*4)(out); + +.align 8 +.global __serpent_enc_blk_8way +.type __serpent_enc_blk_8way,@function; + +__serpent_enc_blk_8way: + /* input: + * %rdi: ctx, CTX + * %rsi: dst + * %rdx: src + * %rcx: bool, if true: xor output + */ + + pcmpeqd RNOT, RNOT; + + leaq (4*4*4)(%rdx), %rax; + read_blocks(%rdx, RA1, RB1, RC1, RD1, RK0, RK1, RK2); + read_blocks(%rax, RA2, RB2, RC2, RD2, RK0, RK1, RK2); + + K2(RA, RB, RC, RD, RE, 0); + S(S0, RA, RB, RC, RD, RE); LK2(RC, RB, RD, RA, RE, 1); + S(S1, RC, RB, RD, RA, RE); LK2(RE, RD, RA, RC, RB, 2); + S(S2, RE, RD, RA, RC, RB); LK2(RB, RD, RE, RC, RA, 3); + S(S3, RB, RD, RE, RC, RA); LK2(RC, RA, RD, RB, RE, 4); + S(S4, RC, RA, RD, RB, RE); LK2(RA, RD, RB, RE, RC, 5); + S(S5, RA, RD, RB, RE, RC); LK2(RC, RA, RD, RE, RB, 6); + S(S6, RC, RA, RD, RE, RB); LK2(RD, RB, RA, RE, RC, 7); + S(S7, RD, RB, RA, RE, RC); LK2(RC, RA, RE, RD, RB, 8); + S(S0, RC, RA, RE, RD, RB); LK2(RE, RA, RD, RC, RB, 9); + S(S1, RE, RA, RD, RC, RB); LK2(RB, RD, RC, RE, RA, 10); + S(S2, RB, RD, RC, RE, RA); LK2(RA, RD, RB, RE, RC, 11); + S(S3, RA, RD, RB, RE, RC); LK2(RE, RC, RD, RA, RB, 12); + S(S4, RE, RC, RD, RA, RB); LK2(RC, RD, RA, RB, RE, 13); + S(S5, RC, RD, RA, RB, RE); LK2(RE, RC, RD, RB, RA, 14); + S(S6, RE, RC, RD, RB, RA); LK2(RD, RA, RC, RB, RE, 15); + S(S7, RD, RA, RC, RB, RE); LK2(RE, RC, RB, RD, RA, 16); + S(S0, RE, RC, RB, RD, RA); LK2(RB, RC, RD, RE, RA, 17); + S(S1, RB, RC, RD, RE, RA); LK2(RA, RD, RE, RB, RC, 18); + S(S2, RA, RD, RE, RB, RC); LK2(RC, RD, RA, RB, RE, 19); + S(S3, RC, RD, RA, RB, RE); LK2(RB, RE, RD, RC, RA, 20); + S(S4, RB, RE, RD, RC, RA); LK2(RE, RD, RC, RA, RB, 21); + S(S5, RE, RD, RC, RA, RB); LK2(RB, RE, RD, RA, RC, 22); + S(S6, RB, RE, RD, RA, RC); LK2(RD, RC, RE, RA, RB, 23); + S(S7, RD, RC, RE, RA, RB); LK2(RB, RE, RA, RD, RC, 24); + S(S0, RB, RE, RA, RD, RC); LK2(RA, RE, RD, RB, RC, 25); + S(S1, RA, RE, RD, RB, RC); LK2(RC, RD, RB, RA, RE, 26); + S(S2, RC, RD, RB, RA, RE); LK2(RE, RD, RC, RA, RB, 27); + S(S3, RE, RD, RC, RA, RB); LK2(RA, RB, RD, RE, RC, 28); + S(S4, RA, RB, RD, RE, RC); LK2(RB, RD, RE, RC, RA, 29); + S(S5, RB, RD, RE, RC, RA); LK2(RA, RB, RD, RC, RE, 30); + S(S6, RA, RB, RD, RC, RE); LK2(RD, RE, RB, RC, RA, 31); + S(S7, RD, RE, RB, RC, RA); K2(RA, RB, RC, RD, RE, 32); + + leaq (4*4*4)(%rsi), %rax; + + testb %cl, %cl; + jnz __enc_xor8; + + write_blocks(%rsi, RA1, RB1, RC1, RD1, RK0, RK1, RK2); + write_blocks(%rax, RA2, RB2, RC2, RD2, RK0, RK1, RK2); + + ret; + +__enc_xor8: + xor_blocks(%rsi, RA1, RB1, RC1, RD1, RK0, RK1, RK2); + xor_blocks(%rax, RA2, RB2, RC2, RD2, RK0, RK1, RK2); + + ret; + +.align 8 +.global serpent_dec_blk_8way +.type serpent_dec_blk_8way,@function; + +serpent_dec_blk_8way: + /* input: + * %rdi: ctx, CTX + * %rsi: dst + * %rdx: src + */ + + pcmpeqd RNOT, RNOT; + + leaq (4*4*4)(%rdx), %rax; + read_blocks(%rdx, RA1, RB1, RC1, RD1, RK0, RK1, RK2); + read_blocks(%rax, RA2, RB2, RC2, RD2, RK0, RK1, RK2); + + K2(RA, RB, RC, RD, RE, 32); + SP(SI7, RA, RB, RC, RD, RE, 31); KL2(RB, RD, RA, RE, RC, 31); + SP(SI6, RB, RD, RA, RE, RC, 30); KL2(RA, RC, RE, RB, RD, 30); + SP(SI5, RA, RC, RE, RB, RD, 29); KL2(RC, RD, RA, RE, RB, 29); + SP(SI4, RC, RD, RA, RE, RB, 28); KL2(RC, RA, RB, RE, RD, 28); + SP(SI3, RC, RA, RB, RE, RD, 27); KL2(RB, RC, RD, RE, RA, 27); + SP(SI2, RB, RC, RD, RE, RA, 26); KL2(RC, RA, RE, RD, RB, 26); + SP(SI1, RC, RA, RE, RD, RB, 25); KL2(RB, RA, RE, RD, RC, 25); + SP(SI0, RB, RA, RE, RD, RC, 24); KL2(RE, RC, RA, RB, RD, 24); + SP(SI7, RE, RC, RA, RB, RD, 23); KL2(RC, RB, RE, RD, RA, 23); + SP(SI6, RC, RB, RE, RD, RA, 22); KL2(RE, RA, RD, RC, RB, 22); + SP(SI5, RE, RA, RD, RC, RB, 21); KL2(RA, RB, RE, RD, RC, 21); + SP(SI4, RA, RB, RE, RD, RC, 20); KL2(RA, RE, RC, RD, RB, 20); + SP(SI3, RA, RE, RC, RD, RB, 19); KL2(RC, RA, RB, RD, RE, 19); + SP(SI2, RC, RA, RB, RD, RE, 18); KL2(RA, RE, RD, RB, RC, 18); + SP(SI1, RA, RE, RD, RB, RC, 17); KL2(RC, RE, RD, RB, RA, 17); + SP(SI0, RC, RE, RD, RB, RA, 16); KL2(RD, RA, RE, RC, RB, 16); + SP(SI7, RD, RA, RE, RC, RB, 15); KL2(RA, RC, RD, RB, RE, 15); + SP(SI6, RA, RC, RD, RB, RE, 14); KL2(RD, RE, RB, RA, RC, 14); + SP(SI5, RD, RE, RB, RA, RC, 13); KL2(RE, RC, RD, RB, RA, 13); + SP(SI4, RE, RC, RD, RB, RA, 12); KL2(RE, RD, RA, RB, RC, 12); + SP(SI3, RE, RD, RA, RB, RC, 11); KL2(RA, RE, RC, RB, RD, 11); + SP(SI2, RA, RE, RC, RB, RD, 10); KL2(RE, RD, RB, RC, RA, 10); + SP(SI1, RE, RD, RB, RC, RA, 9); KL2(RA, RD, RB, RC, RE, 9); + SP(SI0, RA, RD, RB, RC, RE, 8); KL2(RB, RE, RD, RA, RC, 8); + SP(SI7, RB, RE, RD, RA, RC, 7); KL2(RE, RA, RB, RC, RD, 7); + SP(SI6, RE, RA, RB, RC, RD, 6); KL2(RB, RD, RC, RE, RA, 6); + SP(SI5, RB, RD, RC, RE, RA, 5); KL2(RD, RA, RB, RC, RE, 5); + SP(SI4, RD, RA, RB, RC, RE, 4); KL2(RD, RB, RE, RC, RA, 4); + SP(SI3, RD, RB, RE, RC, RA, 3); KL2(RE, RD, RA, RC, RB, 3); + SP(SI2, RE, RD, RA, RC, RB, 2); KL2(RD, RB, RC, RA, RE, 2); + SP(SI1, RD, RB, RC, RA, RE, 1); KL2(RE, RB, RC, RA, RD, 1); + S(SI0, RE, RB, RC, RA, RD); K2(RC, RD, RB, RE, RA, 0); + + leaq (4*4*4)(%rsi), %rax; + write_blocks(%rsi, RC1, RD1, RB1, RE1, RK0, RK1, RK2); + write_blocks(%rax, RC2, RD2, RB2, RE2, RK0, RK1, RK2); + + ret; diff --git a/arch/x86/crypto/serpent_sse2_glue.c b/arch/x86/crypto/serpent_sse2_glue.c new file mode 100644 index 000000000000..7955a9b76b91 --- /dev/null +++ b/arch/x86/crypto/serpent_sse2_glue.c @@ -0,0 +1,1070 @@ +/* + * Glue Code for SSE2 assembler versions of Serpent Cipher + * + * Copyright (c) 2011 Jussi Kivilinna <jussi.kivilinna@mbnet.fi> + * + * Glue code based on aesni-intel_glue.c by: + * Copyright (C) 2008, Intel Corp. + * Author: Huang Ying <ying.huang@intel.com> + * + * CBC & ECB parts based on code (crypto/cbc.c,ecb.c) by: + * Copyright (c) 2006 Herbert Xu <herbert@gondor.apana.org.au> + * CTR part based on code (crypto/ctr.c) by: + * (C) Copyright IBM Corp. 2007 - Joy Latten <latten@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + * + */ + +#include <linux/module.h> +#include <linux/hardirq.h> +#include <linux/types.h> +#include <linux/crypto.h> +#include <linux/err.h> +#include <crypto/algapi.h> +#include <crypto/serpent.h> +#include <crypto/cryptd.h> +#include <crypto/b128ops.h> +#include <crypto/ctr.h> +#include <crypto/lrw.h> +#include <crypto/xts.h> +#include <asm/i387.h> +#include <asm/serpent.h> +#include <crypto/scatterwalk.h> +#include <linux/workqueue.h> +#include <linux/spinlock.h> + +struct async_serpent_ctx { + struct cryptd_ablkcipher *cryptd_tfm; +}; + +static inline bool serpent_fpu_begin(bool fpu_enabled, unsigned int nbytes) +{ + if (fpu_enabled) + return true; + + /* SSE2 is only used when chunk to be processed is large enough, so + * do not enable FPU until it is necessary. + */ + if (nbytes < SERPENT_BLOCK_SIZE * SERPENT_PARALLEL_BLOCKS) + return false; + + kernel_fpu_begin(); + return true; +} + +static inline void serpent_fpu_end(bool fpu_enabled) +{ + if (fpu_enabled) + kernel_fpu_end(); +} + +static int ecb_crypt(struct blkcipher_desc *desc, struct blkcipher_walk *walk, + bool enc) +{ + bool fpu_enabled = false; + struct serpent_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + const unsigned int bsize = SERPENT_BLOCK_SIZE; + unsigned int nbytes; + int err; + + err = blkcipher_walk_virt(desc, walk); + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + + while ((nbytes = walk->nbytes)) { + u8 *wsrc = walk->src.virt.addr; + u8 *wdst = walk->dst.virt.addr; + + fpu_enabled = serpent_fpu_begin(fpu_enabled, nbytes); + + /* Process multi-block batch */ + if (nbytes >= bsize * SERPENT_PARALLEL_BLOCKS) { + do { + if (enc) + serpent_enc_blk_xway(ctx, wdst, wsrc); + else + serpent_dec_blk_xway(ctx, wdst, wsrc); + + wsrc += bsize * SERPENT_PARALLEL_BLOCKS; + wdst += bsize * SERPENT_PARALLEL_BLOCKS; + nbytes -= bsize * SERPENT_PARALLEL_BLOCKS; + } while (nbytes >= bsize * SERPENT_PARALLEL_BLOCKS); + + if (nbytes < bsize) + goto done; + } + + /* Handle leftovers */ + do { + if (enc) + __serpent_encrypt(ctx, wdst, wsrc); + else + __serpent_decrypt(ctx, wdst, wsrc); + + wsrc += bsize; + wdst += bsize; + nbytes -= bsize; + } while (nbytes >= bsize); + +done: + err = blkcipher_walk_done(desc, walk, nbytes); + } + + serpent_fpu_end(fpu_enabled); + return err; +} + +static int ecb_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct blkcipher_walk walk; + + blkcipher_walk_init(&walk, dst, src, nbytes); + return ecb_crypt(desc, &walk, true); +} + +static int ecb_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct blkcipher_walk walk; + + blkcipher_walk_init(&walk, dst, src, nbytes); + return ecb_crypt(desc, &walk, false); +} + +static struct crypto_alg blk_ecb_alg = { + .cra_name = "__ecb-serpent-sse2", + .cra_driver_name = "__driver-ecb-serpent-sse2", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = SERPENT_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct serpent_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(blk_ecb_alg.cra_list), + .cra_u = { + .blkcipher = { + .min_keysize = SERPENT_MIN_KEY_SIZE, + .max_keysize = SERPENT_MAX_KEY_SIZE, + .setkey = serpent_setkey, + .encrypt = ecb_encrypt, + .decrypt = ecb_decrypt, + }, + }, +}; + +static unsigned int __cbc_encrypt(struct blkcipher_desc *desc, + struct blkcipher_walk *walk) +{ + struct serpent_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + const unsigned int bsize = SERPENT_BLOCK_SIZE; + unsigned int nbytes = walk->nbytes; + u128 *src = (u128 *)walk->src.virt.addr; + u128 *dst = (u128 *)walk->dst.virt.addr; + u128 *iv = (u128 *)walk->iv; + + do { + u128_xor(dst, src, iv); + __serpent_encrypt(ctx, (u8 *)dst, (u8 *)dst); + iv = dst; + + src += 1; + dst += 1; + nbytes -= bsize; + } while (nbytes >= bsize); + + u128_xor((u128 *)walk->iv, (u128 *)walk->iv, iv); + return nbytes; +} + +static int cbc_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct blkcipher_walk walk; + int err; + + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + while ((nbytes = walk.nbytes)) { + nbytes = __cbc_encrypt(desc, &walk); + err = blkcipher_walk_done(desc, &walk, nbytes); + } + + return err; +} + +static unsigned int __cbc_decrypt(struct blkcipher_desc *desc, + struct blkcipher_walk *walk) +{ + struct serpent_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + const unsigned int bsize = SERPENT_BLOCK_SIZE; + unsigned int nbytes = walk->nbytes; + u128 *src = (u128 *)walk->src.virt.addr; + u128 *dst = (u128 *)walk->dst.virt.addr; + u128 ivs[SERPENT_PARALLEL_BLOCKS - 1]; + u128 last_iv; + int i; + + /* Start of the last block. */ + src += nbytes / bsize - 1; + dst += nbytes / bsize - 1; + + last_iv = *src; + + /* Process multi-block batch */ + if (nbytes >= bsize * SERPENT_PARALLEL_BLOCKS) { + do { + nbytes -= bsize * (SERPENT_PARALLEL_BLOCKS - 1); + src -= SERPENT_PARALLEL_BLOCKS - 1; + dst -= SERPENT_PARALLEL_BLOCKS - 1; + + for (i = 0; i < SERPENT_PARALLEL_BLOCKS - 1; i++) + ivs[i] = src[i]; + + serpent_dec_blk_xway(ctx, (u8 *)dst, (u8 *)src); + + for (i = 0; i < SERPENT_PARALLEL_BLOCKS - 1; i++) + u128_xor(dst + (i + 1), dst + (i + 1), ivs + i); + + nbytes -= bsize; + if (nbytes < bsize) + goto done; + + u128_xor(dst, dst, src - 1); + src -= 1; + dst -= 1; + } while (nbytes >= bsize * SERPENT_PARALLEL_BLOCKS); + + if (nbytes < bsize) + goto done; + } + + /* Handle leftovers */ + for (;;) { + __serpent_decrypt(ctx, (u8 *)dst, (u8 *)src); + + nbytes -= bsize; + if (nbytes < bsize) + break; + + u128_xor(dst, dst, src - 1); + src -= 1; + dst -= 1; + } + +done: + u128_xor(dst, dst, (u128 *)walk->iv); + *(u128 *)walk->iv = last_iv; + + return nbytes; +} + +static int cbc_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + bool fpu_enabled = false; + struct blkcipher_walk walk; + int err; + + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + + while ((nbytes = walk.nbytes)) { + fpu_enabled = serpent_fpu_begin(fpu_enabled, nbytes); + nbytes = __cbc_decrypt(desc, &walk); + err = blkcipher_walk_done(desc, &walk, nbytes); + } + + serpent_fpu_end(fpu_enabled); + return err; +} + +static struct crypto_alg blk_cbc_alg = { + .cra_name = "__cbc-serpent-sse2", + .cra_driver_name = "__driver-cbc-serpent-sse2", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = SERPENT_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct serpent_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(blk_cbc_alg.cra_list), + .cra_u = { + .blkcipher = { + .min_keysize = SERPENT_MIN_KEY_SIZE, + .max_keysize = SERPENT_MAX_KEY_SIZE, + .setkey = serpent_setkey, + .encrypt = cbc_encrypt, + .decrypt = cbc_decrypt, + }, + }, +}; + +static inline void u128_to_be128(be128 *dst, const u128 *src) +{ + dst->a = cpu_to_be64(src->a); + dst->b = cpu_to_be64(src->b); +} + +static inline void be128_to_u128(u128 *dst, const be128 *src) +{ + dst->a = be64_to_cpu(src->a); + dst->b = be64_to_cpu(src->b); +} + +static inline void u128_inc(u128 *i) +{ + i->b++; + if (!i->b) + i->a++; +} + +static void ctr_crypt_final(struct blkcipher_desc *desc, + struct blkcipher_walk *walk) +{ + struct serpent_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + u8 *ctrblk = walk->iv; + u8 keystream[SERPENT_BLOCK_SIZE]; + u8 *src = walk->src.virt.addr; + u8 *dst = walk->dst.virt.addr; + unsigned int nbytes = walk->nbytes; + + __serpent_encrypt(ctx, keystream, ctrblk); + crypto_xor(keystream, src, nbytes); + memcpy(dst, keystream, nbytes); + + crypto_inc(ctrblk, SERPENT_BLOCK_SIZE); +} + +static unsigned int __ctr_crypt(struct blkcipher_desc *desc, + struct blkcipher_walk *walk) +{ + struct serpent_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + const unsigned int bsize = SERPENT_BLOCK_SIZE; + unsigned int nbytes = walk->nbytes; + u128 *src = (u128 *)walk->src.virt.addr; + u128 *dst = (u128 *)walk->dst.virt.addr; + u128 ctrblk; + be128 ctrblocks[SERPENT_PARALLEL_BLOCKS]; + int i; + + be128_to_u128(&ctrblk, (be128 *)walk->iv); + + /* Process multi-block batch */ + if (nbytes >= bsize * SERPENT_PARALLEL_BLOCKS) { + do { + /* create ctrblks for parallel encrypt */ + for (i = 0; i < SERPENT_PARALLEL_BLOCKS; i++) { + if (dst != src) + dst[i] = src[i]; + + u128_to_be128(&ctrblocks[i], &ctrblk); + u128_inc(&ctrblk); + } + + serpent_enc_blk_xway_xor(ctx, (u8 *)dst, + (u8 *)ctrblocks); + + src += SERPENT_PARALLEL_BLOCKS; + dst += SERPENT_PARALLEL_BLOCKS; + nbytes -= bsize * SERPENT_PARALLEL_BLOCKS; + } while (nbytes >= bsize * SERPENT_PARALLEL_BLOCKS); + + if (nbytes < bsize) + goto done; + } + + /* Handle leftovers */ + do { + if (dst != src) + *dst = *src; + + u128_to_be128(&ctrblocks[0], &ctrblk); + u128_inc(&ctrblk); + + __serpent_encrypt(ctx, (u8 *)ctrblocks, (u8 *)ctrblocks); + u128_xor(dst, dst, (u128 *)ctrblocks); + + src += 1; + dst += 1; + nbytes -= bsize; + } while (nbytes >= bsize); + +done: + u128_to_be128((be128 *)walk->iv, &ctrblk); + return nbytes; +} + +static int ctr_crypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + bool fpu_enabled = false; + struct blkcipher_walk walk; + int err; + + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt_block(desc, &walk, SERPENT_BLOCK_SIZE); + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + + while ((nbytes = walk.nbytes) >= SERPENT_BLOCK_SIZE) { + fpu_enabled = serpent_fpu_begin(fpu_enabled, nbytes); + nbytes = __ctr_crypt(desc, &walk); + err = blkcipher_walk_done(desc, &walk, nbytes); + } + + serpent_fpu_end(fpu_enabled); + + if (walk.nbytes) { + ctr_crypt_final(desc, &walk); + err = blkcipher_walk_done(desc, &walk, 0); + } + + return err; +} + +static struct crypto_alg blk_ctr_alg = { + .cra_name = "__ctr-serpent-sse2", + .cra_driver_name = "__driver-ctr-serpent-sse2", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = 1, + .cra_ctxsize = sizeof(struct serpent_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(blk_ctr_alg.cra_list), + .cra_u = { + .blkcipher = { + .min_keysize = SERPENT_MIN_KEY_SIZE, + .max_keysize = SERPENT_MAX_KEY_SIZE, + .ivsize = SERPENT_BLOCK_SIZE, + .setkey = serpent_setkey, + .encrypt = ctr_crypt, + .decrypt = ctr_crypt, + }, + }, +}; + +struct crypt_priv { + struct serpent_ctx *ctx; + bool fpu_enabled; +}; + +static void encrypt_callback(void *priv, u8 *srcdst, unsigned int nbytes) +{ + const unsigned int bsize = SERPENT_BLOCK_SIZE; + struct crypt_priv *ctx = priv; + int i; + + ctx->fpu_enabled = serpent_fpu_begin(ctx->fpu_enabled, nbytes); + + if (nbytes == bsize * SERPENT_PARALLEL_BLOCKS) { + serpent_enc_blk_xway(ctx->ctx, srcdst, srcdst); + return; + } + + for (i = 0; i < nbytes / bsize; i++, srcdst += bsize) + __serpent_encrypt(ctx->ctx, srcdst, srcdst); +} + +static void decrypt_callback(void *priv, u8 *srcdst, unsigned int nbytes) +{ + const unsigned int bsize = SERPENT_BLOCK_SIZE; + struct crypt_priv *ctx = priv; + int i; + + ctx->fpu_enabled = serpent_fpu_begin(ctx->fpu_enabled, nbytes); + + if (nbytes == bsize * SERPENT_PARALLEL_BLOCKS) { + serpent_dec_blk_xway(ctx->ctx, srcdst, srcdst); + return; + } + + for (i = 0; i < nbytes / bsize; i++, srcdst += bsize) + __serpent_decrypt(ctx->ctx, srcdst, srcdst); +} + +struct serpent_lrw_ctx { + struct lrw_table_ctx lrw_table; + struct serpent_ctx serpent_ctx; +}; + +static int lrw_serpent_setkey(struct crypto_tfm *tfm, const u8 *key, + unsigned int keylen) +{ + struct serpent_lrw_ctx *ctx = crypto_tfm_ctx(tfm); + int err; + + err = __serpent_setkey(&ctx->serpent_ctx, key, keylen - + SERPENT_BLOCK_SIZE); + if (err) + return err; + + return lrw_init_table(&ctx->lrw_table, key + keylen - + SERPENT_BLOCK_SIZE); +} + +static int lrw_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct serpent_lrw_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + be128 buf[SERPENT_PARALLEL_BLOCKS]; + struct crypt_priv crypt_ctx = { + .ctx = &ctx->serpent_ctx, + .fpu_enabled = false, + }; + struct lrw_crypt_req req = { + .tbuf = buf, + .tbuflen = sizeof(buf), + + .table_ctx = &ctx->lrw_table, + .crypt_ctx = &crypt_ctx, + .crypt_fn = encrypt_callback, + }; + int ret; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + ret = lrw_crypt(desc, dst, src, nbytes, &req); + serpent_fpu_end(crypt_ctx.fpu_enabled); + + return ret; +} + +static int lrw_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct serpent_lrw_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + be128 buf[SERPENT_PARALLEL_BLOCKS]; + struct crypt_priv crypt_ctx = { + .ctx = &ctx->serpent_ctx, + .fpu_enabled = false, + }; + struct lrw_crypt_req req = { + .tbuf = buf, + .tbuflen = sizeof(buf), + + .table_ctx = &ctx->lrw_table, + .crypt_ctx = &crypt_ctx, + .crypt_fn = decrypt_callback, + }; + int ret; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + ret = lrw_crypt(desc, dst, src, nbytes, &req); + serpent_fpu_end(crypt_ctx.fpu_enabled); + + return ret; +} + +static void lrw_exit_tfm(struct crypto_tfm *tfm) +{ + struct serpent_lrw_ctx *ctx = crypto_tfm_ctx(tfm); + + lrw_free_table(&ctx->lrw_table); +} + +static struct crypto_alg blk_lrw_alg = { + .cra_name = "__lrw-serpent-sse2", + .cra_driver_name = "__driver-lrw-serpent-sse2", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = SERPENT_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct serpent_lrw_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(blk_lrw_alg.cra_list), + .cra_exit = lrw_exit_tfm, + .cra_u = { + .blkcipher = { + .min_keysize = SERPENT_MIN_KEY_SIZE + + SERPENT_BLOCK_SIZE, + .max_keysize = SERPENT_MAX_KEY_SIZE + + SERPENT_BLOCK_SIZE, + .ivsize = SERPENT_BLOCK_SIZE, + .setkey = lrw_serpent_setkey, + .encrypt = lrw_encrypt, + .decrypt = lrw_decrypt, + }, + }, +}; + +struct serpent_xts_ctx { + struct serpent_ctx tweak_ctx; + struct serpent_ctx crypt_ctx; +}; + +static int xts_serpent_setkey(struct crypto_tfm *tfm, const u8 *key, + unsigned int keylen) +{ + struct serpent_xts_ctx *ctx = crypto_tfm_ctx(tfm); + u32 *flags = &tfm->crt_flags; + int err; + + /* key consists of keys of equal size concatenated, therefore + * the length must be even + */ + if (keylen % 2) { + *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; + } + + /* first half of xts-key is for crypt */ + err = __serpent_setkey(&ctx->crypt_ctx, key, keylen / 2); + if (err) + return err; + + /* second half of xts-key is for tweak */ + return __serpent_setkey(&ctx->tweak_ctx, key + keylen / 2, keylen / 2); +} + +static int xts_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct serpent_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + be128 buf[SERPENT_PARALLEL_BLOCKS]; + struct crypt_priv crypt_ctx = { + .ctx = &ctx->crypt_ctx, + .fpu_enabled = false, + }; + struct xts_crypt_req req = { + .tbuf = buf, + .tbuflen = sizeof(buf), + + .tweak_ctx = &ctx->tweak_ctx, + .tweak_fn = XTS_TWEAK_CAST(__serpent_encrypt), + .crypt_ctx = &crypt_ctx, + .crypt_fn = encrypt_callback, + }; + int ret; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + ret = xts_crypt(desc, dst, src, nbytes, &req); + serpent_fpu_end(crypt_ctx.fpu_enabled); + + return ret; +} + +static int xts_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct serpent_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + be128 buf[SERPENT_PARALLEL_BLOCKS]; + struct crypt_priv crypt_ctx = { + .ctx = &ctx->crypt_ctx, + .fpu_enabled = false, + }; + struct xts_crypt_req req = { + .tbuf = buf, + .tbuflen = sizeof(buf), + + .tweak_ctx = &ctx->tweak_ctx, + .tweak_fn = XTS_TWEAK_CAST(__serpent_encrypt), + .crypt_ctx = &crypt_ctx, + .crypt_fn = decrypt_callback, + }; + int ret; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + ret = xts_crypt(desc, dst, src, nbytes, &req); + serpent_fpu_end(crypt_ctx.fpu_enabled); + + return ret; +} + +static struct crypto_alg blk_xts_alg = { + .cra_name = "__xts-serpent-sse2", + .cra_driver_name = "__driver-xts-serpent-sse2", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = SERPENT_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct serpent_xts_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(blk_xts_alg.cra_list), + .cra_u = { + .blkcipher = { + .min_keysize = SERPENT_MIN_KEY_SIZE * 2, + .max_keysize = SERPENT_MAX_KEY_SIZE * 2, + .ivsize = SERPENT_BLOCK_SIZE, + .setkey = xts_serpent_setkey, + .encrypt = xts_encrypt, + .decrypt = xts_decrypt, + }, + }, +}; + +static int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key, + unsigned int key_len) +{ + struct async_serpent_ctx *ctx = crypto_ablkcipher_ctx(tfm); + struct crypto_ablkcipher *child = &ctx->cryptd_tfm->base; + int err; + + crypto_ablkcipher_clear_flags(child, CRYPTO_TFM_REQ_MASK); + crypto_ablkcipher_set_flags(child, crypto_ablkcipher_get_flags(tfm) + & CRYPTO_TFM_REQ_MASK); + err = crypto_ablkcipher_setkey(child, key, key_len); + crypto_ablkcipher_set_flags(tfm, crypto_ablkcipher_get_flags(child) + & CRYPTO_TFM_RES_MASK); + return err; +} + +static int __ablk_encrypt(struct ablkcipher_request *req) +{ + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); + struct async_serpent_ctx *ctx = crypto_ablkcipher_ctx(tfm); + struct blkcipher_desc desc; + + desc.tfm = cryptd_ablkcipher_child(ctx->cryptd_tfm); + desc.info = req->info; + desc.flags = 0; + + return crypto_blkcipher_crt(desc.tfm)->encrypt( + &desc, req->dst, req->src, req->nbytes); +} + +static int ablk_encrypt(struct ablkcipher_request *req) +{ + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); + struct async_serpent_ctx *ctx = crypto_ablkcipher_ctx(tfm); + + if (!irq_fpu_usable()) { + struct ablkcipher_request *cryptd_req = + ablkcipher_request_ctx(req); + + memcpy(cryptd_req, req, sizeof(*req)); + ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base); + + return crypto_ablkcipher_encrypt(cryptd_req); + } else { + return __ablk_encrypt(req); + } +} + +static int ablk_decrypt(struct ablkcipher_request *req) +{ + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); + struct async_serpent_ctx *ctx = crypto_ablkcipher_ctx(tfm); + + if (!irq_fpu_usable()) { + struct ablkcipher_request *cryptd_req = + ablkcipher_request_ctx(req); + + memcpy(cryptd_req, req, sizeof(*req)); + ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base); + + return crypto_ablkcipher_decrypt(cryptd_req); + } else { + struct blkcipher_desc desc; + + desc.tfm = cryptd_ablkcipher_child(ctx->cryptd_tfm); + desc.info = req->info; + desc.flags = 0; + + return crypto_blkcipher_crt(desc.tfm)->decrypt( + &desc, req->dst, req->src, req->nbytes); + } +} + +static void ablk_exit(struct crypto_tfm *tfm) +{ + struct async_serpent_ctx *ctx = crypto_tfm_ctx(tfm); + + cryptd_free_ablkcipher(ctx->cryptd_tfm); +} + +static void ablk_init_common(struct crypto_tfm *tfm, + struct cryptd_ablkcipher *cryptd_tfm) +{ + struct async_serpent_ctx *ctx = crypto_tfm_ctx(tfm); + + ctx->cryptd_tfm = cryptd_tfm; + tfm->crt_ablkcipher.reqsize = sizeof(struct ablkcipher_request) + + crypto_ablkcipher_reqsize(&cryptd_tfm->base); +} + +static int ablk_ecb_init(struct crypto_tfm *tfm) +{ + struct cryptd_ablkcipher *cryptd_tfm; + + cryptd_tfm = cryptd_alloc_ablkcipher("__driver-ecb-serpent-sse2", 0, 0); + if (IS_ERR(cryptd_tfm)) + return PTR_ERR(cryptd_tfm); + ablk_init_common(tfm, cryptd_tfm); + return 0; +} + +static struct crypto_alg ablk_ecb_alg = { + .cra_name = "ecb(serpent)", + .cra_driver_name = "ecb-serpent-sse2", + .cra_priority = 400, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC, + .cra_blocksize = SERPENT_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct async_serpent_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(ablk_ecb_alg.cra_list), + .cra_init = ablk_ecb_init, + .cra_exit = ablk_exit, + .cra_u = { + .ablkcipher = { + .min_keysize = SERPENT_MIN_KEY_SIZE, + .max_keysize = SERPENT_MAX_KEY_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + }, + }, +}; + +static int ablk_cbc_init(struct crypto_tfm *tfm) +{ + struct cryptd_ablkcipher *cryptd_tfm; + + cryptd_tfm = cryptd_alloc_ablkcipher("__driver-cbc-serpent-sse2", 0, 0); + if (IS_ERR(cryptd_tfm)) + return PTR_ERR(cryptd_tfm); + ablk_init_common(tfm, cryptd_tfm); + return 0; +} + +static struct crypto_alg ablk_cbc_alg = { + .cra_name = "cbc(serpent)", + .cra_driver_name = "cbc-serpent-sse2", + .cra_priority = 400, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC, + .cra_blocksize = SERPENT_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct async_serpent_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(ablk_cbc_alg.cra_list), + .cra_init = ablk_cbc_init, + .cra_exit = ablk_exit, + .cra_u = { + .ablkcipher = { + .min_keysize = SERPENT_MIN_KEY_SIZE, + .max_keysize = SERPENT_MAX_KEY_SIZE, + .ivsize = SERPENT_BLOCK_SIZE, + .setkey = ablk_set_key, + .encrypt = __ablk_encrypt, + .decrypt = ablk_decrypt, + }, + }, +}; + +static int ablk_ctr_init(struct crypto_tfm *tfm) +{ + struct cryptd_ablkcipher *cryptd_tfm; + + cryptd_tfm = cryptd_alloc_ablkcipher("__driver-ctr-serpent-sse2", 0, 0); + if (IS_ERR(cryptd_tfm)) + return PTR_ERR(cryptd_tfm); + ablk_init_common(tfm, cryptd_tfm); + return 0; +} + +static struct crypto_alg ablk_ctr_alg = { + .cra_name = "ctr(serpent)", + .cra_driver_name = "ctr-serpent-sse2", + .cra_priority = 400, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC, + .cra_blocksize = 1, + .cra_ctxsize = sizeof(struct async_serpent_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(ablk_ctr_alg.cra_list), + .cra_init = ablk_ctr_init, + .cra_exit = ablk_exit, + .cra_u = { + .ablkcipher = { + .min_keysize = SERPENT_MIN_KEY_SIZE, + .max_keysize = SERPENT_MAX_KEY_SIZE, + .ivsize = SERPENT_BLOCK_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_encrypt, + .geniv = "chainiv", + }, + }, +}; + +static int ablk_lrw_init(struct crypto_tfm *tfm) +{ + struct cryptd_ablkcipher *cryptd_tfm; + + cryptd_tfm = cryptd_alloc_ablkcipher("__driver-lrw-serpent-sse2", 0, 0); + if (IS_ERR(cryptd_tfm)) + return PTR_ERR(cryptd_tfm); + ablk_init_common(tfm, cryptd_tfm); + return 0; +} + +static struct crypto_alg ablk_lrw_alg = { + .cra_name = "lrw(serpent)", + .cra_driver_name = "lrw-serpent-sse2", + .cra_priority = 400, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC, + .cra_blocksize = SERPENT_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct async_serpent_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(ablk_lrw_alg.cra_list), + .cra_init = ablk_lrw_init, + .cra_exit = ablk_exit, + .cra_u = { + .ablkcipher = { + .min_keysize = SERPENT_MIN_KEY_SIZE + + SERPENT_BLOCK_SIZE, + .max_keysize = SERPENT_MAX_KEY_SIZE + + SERPENT_BLOCK_SIZE, + .ivsize = SERPENT_BLOCK_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + }, + }, +}; + +static int ablk_xts_init(struct crypto_tfm *tfm) +{ + struct cryptd_ablkcipher *cryptd_tfm; + + cryptd_tfm = cryptd_alloc_ablkcipher("__driver-xts-serpent-sse2", 0, 0); + if (IS_ERR(cryptd_tfm)) + return PTR_ERR(cryptd_tfm); + ablk_init_common(tfm, cryptd_tfm); + return 0; +} + +static struct crypto_alg ablk_xts_alg = { + .cra_name = "xts(serpent)", + .cra_driver_name = "xts-serpent-sse2", + .cra_priority = 400, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC, + .cra_blocksize = SERPENT_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct async_serpent_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(ablk_xts_alg.cra_list), + .cra_init = ablk_xts_init, + .cra_exit = ablk_exit, + .cra_u = { + .ablkcipher = { + .min_keysize = SERPENT_MIN_KEY_SIZE * 2, + .max_keysize = SERPENT_MAX_KEY_SIZE * 2, + .ivsize = SERPENT_BLOCK_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + }, + }, +}; + +static int __init serpent_sse2_init(void) +{ + int err; + + if (!cpu_has_xmm2) { + printk(KERN_INFO "SSE2 instructions are not detected.\n"); + return -ENODEV; + } + + err = crypto_register_alg(&blk_ecb_alg); + if (err) + goto blk_ecb_err; + err = crypto_register_alg(&blk_cbc_alg); + if (err) + goto blk_cbc_err; + err = crypto_register_alg(&blk_ctr_alg); + if (err) + goto blk_ctr_err; + err = crypto_register_alg(&ablk_ecb_alg); + if (err) + goto ablk_ecb_err; + err = crypto_register_alg(&ablk_cbc_alg); + if (err) + goto ablk_cbc_err; + err = crypto_register_alg(&ablk_ctr_alg); + if (err) + goto ablk_ctr_err; + err = crypto_register_alg(&blk_lrw_alg); + if (err) + goto blk_lrw_err; + err = crypto_register_alg(&ablk_lrw_alg); + if (err) + goto ablk_lrw_err; + err = crypto_register_alg(&blk_xts_alg); + if (err) + goto blk_xts_err; + err = crypto_register_alg(&ablk_xts_alg); + if (err) + goto ablk_xts_err; + return err; + + crypto_unregister_alg(&ablk_xts_alg); +ablk_xts_err: + crypto_unregister_alg(&blk_xts_alg); +blk_xts_err: + crypto_unregister_alg(&ablk_lrw_alg); +ablk_lrw_err: + crypto_unregister_alg(&blk_lrw_alg); +blk_lrw_err: + crypto_unregister_alg(&ablk_ctr_alg); +ablk_ctr_err: + crypto_unregister_alg(&ablk_cbc_alg); +ablk_cbc_err: + crypto_unregister_alg(&ablk_ecb_alg); +ablk_ecb_err: + crypto_unregister_alg(&blk_ctr_alg); +blk_ctr_err: + crypto_unregister_alg(&blk_cbc_alg); +blk_cbc_err: + crypto_unregister_alg(&blk_ecb_alg); +blk_ecb_err: + return err; +} + +static void __exit serpent_sse2_exit(void) +{ + crypto_unregister_alg(&ablk_xts_alg); + crypto_unregister_alg(&blk_xts_alg); + crypto_unregister_alg(&ablk_lrw_alg); + crypto_unregister_alg(&blk_lrw_alg); + crypto_unregister_alg(&ablk_ctr_alg); + crypto_unregister_alg(&ablk_cbc_alg); + crypto_unregister_alg(&ablk_ecb_alg); + crypto_unregister_alg(&blk_ctr_alg); + crypto_unregister_alg(&blk_cbc_alg); + crypto_unregister_alg(&blk_ecb_alg); +} + +module_init(serpent_sse2_init); +module_exit(serpent_sse2_exit); + +MODULE_DESCRIPTION("Serpent Cipher Algorithm, SSE2 optimized"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("serpent"); diff --git a/arch/x86/crypto/twofish_glue_3way.c b/arch/x86/crypto/twofish_glue_3way.c index 5ede9c444c3e..7fee8c152f93 100644 --- a/arch/x86/crypto/twofish_glue_3way.c +++ b/arch/x86/crypto/twofish_glue_3way.c @@ -32,6 +32,8 @@ #include <crypto/algapi.h> #include <crypto/twofish.h> #include <crypto/b128ops.h> +#include <crypto/lrw.h> +#include <crypto/xts.h> /* regular block cipher functions from twofish_x86_64 module */ asmlinkage void twofish_enc_blk(struct twofish_ctx *ctx, u8 *dst, @@ -432,6 +434,209 @@ static struct crypto_alg blk_ctr_alg = { }, }; +static void encrypt_callback(void *priv, u8 *srcdst, unsigned int nbytes) +{ + const unsigned int bsize = TF_BLOCK_SIZE; + struct twofish_ctx *ctx = priv; + int i; + + if (nbytes == 3 * bsize) { + twofish_enc_blk_3way(ctx, srcdst, srcdst); + return; + } + + for (i = 0; i < nbytes / bsize; i++, srcdst += bsize) + twofish_enc_blk(ctx, srcdst, srcdst); +} + +static void decrypt_callback(void *priv, u8 *srcdst, unsigned int nbytes) +{ + const unsigned int bsize = TF_BLOCK_SIZE; + struct twofish_ctx *ctx = priv; + int i; + + if (nbytes == 3 * bsize) { + twofish_dec_blk_3way(ctx, srcdst, srcdst); + return; + } + + for (i = 0; i < nbytes / bsize; i++, srcdst += bsize) + twofish_dec_blk(ctx, srcdst, srcdst); +} + +struct twofish_lrw_ctx { + struct lrw_table_ctx lrw_table; + struct twofish_ctx twofish_ctx; +}; + +static int lrw_twofish_setkey(struct crypto_tfm *tfm, const u8 *key, + unsigned int keylen) +{ + struct twofish_lrw_ctx *ctx = crypto_tfm_ctx(tfm); + int err; + + err = __twofish_setkey(&ctx->twofish_ctx, key, keylen - TF_BLOCK_SIZE, + &tfm->crt_flags); + if (err) + return err; + + return lrw_init_table(&ctx->lrw_table, key + keylen - TF_BLOCK_SIZE); +} + +static int lrw_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct twofish_lrw_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + be128 buf[3]; + struct lrw_crypt_req req = { + .tbuf = buf, + .tbuflen = sizeof(buf), + + .table_ctx = &ctx->lrw_table, + .crypt_ctx = &ctx->twofish_ctx, + .crypt_fn = encrypt_callback, + }; + + return lrw_crypt(desc, dst, src, nbytes, &req); +} + +static int lrw_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct twofish_lrw_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + be128 buf[3]; + struct lrw_crypt_req req = { + .tbuf = buf, + .tbuflen = sizeof(buf), + + .table_ctx = &ctx->lrw_table, + .crypt_ctx = &ctx->twofish_ctx, + .crypt_fn = decrypt_callback, + }; + + return lrw_crypt(desc, dst, src, nbytes, &req); +} + +static void lrw_exit_tfm(struct crypto_tfm *tfm) +{ + struct twofish_lrw_ctx *ctx = crypto_tfm_ctx(tfm); + + lrw_free_table(&ctx->lrw_table); +} + +static struct crypto_alg blk_lrw_alg = { + .cra_name = "lrw(twofish)", + .cra_driver_name = "lrw-twofish-3way", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = TF_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct twofish_lrw_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(blk_lrw_alg.cra_list), + .cra_exit = lrw_exit_tfm, + .cra_u = { + .blkcipher = { + .min_keysize = TF_MIN_KEY_SIZE + TF_BLOCK_SIZE, + .max_keysize = TF_MAX_KEY_SIZE + TF_BLOCK_SIZE, + .ivsize = TF_BLOCK_SIZE, + .setkey = lrw_twofish_setkey, + .encrypt = lrw_encrypt, + .decrypt = lrw_decrypt, + }, + }, +}; + +struct twofish_xts_ctx { + struct twofish_ctx tweak_ctx; + struct twofish_ctx crypt_ctx; +}; + +static int xts_twofish_setkey(struct crypto_tfm *tfm, const u8 *key, + unsigned int keylen) +{ + struct twofish_xts_ctx *ctx = crypto_tfm_ctx(tfm); + u32 *flags = &tfm->crt_flags; + int err; + + /* key consists of keys of equal size concatenated, therefore + * the length must be even + */ + if (keylen % 2) { + *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; + } + + /* first half of xts-key is for crypt */ + err = __twofish_setkey(&ctx->crypt_ctx, key, keylen / 2, flags); + if (err) + return err; + + /* second half of xts-key is for tweak */ + return __twofish_setkey(&ctx->tweak_ctx, key + keylen / 2, keylen / 2, + flags); +} + +static int xts_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct twofish_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + be128 buf[3]; + struct xts_crypt_req req = { + .tbuf = buf, + .tbuflen = sizeof(buf), + + .tweak_ctx = &ctx->tweak_ctx, + .tweak_fn = XTS_TWEAK_CAST(twofish_enc_blk), + .crypt_ctx = &ctx->crypt_ctx, + .crypt_fn = encrypt_callback, + }; + + return xts_crypt(desc, dst, src, nbytes, &req); +} + +static int xts_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct twofish_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + be128 buf[3]; + struct xts_crypt_req req = { + .tbuf = buf, + .tbuflen = sizeof(buf), + + .tweak_ctx = &ctx->tweak_ctx, + .tweak_fn = XTS_TWEAK_CAST(twofish_enc_blk), + .crypt_ctx = &ctx->crypt_ctx, + .crypt_fn = decrypt_callback, + }; + + return xts_crypt(desc, dst, src, nbytes, &req); +} + +static struct crypto_alg blk_xts_alg = { + .cra_name = "xts(twofish)", + .cra_driver_name = "xts-twofish-3way", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = TF_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct twofish_xts_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(blk_xts_alg.cra_list), + .cra_u = { + .blkcipher = { + .min_keysize = TF_MIN_KEY_SIZE * 2, + .max_keysize = TF_MAX_KEY_SIZE * 2, + .ivsize = TF_BLOCK_SIZE, + .setkey = xts_twofish_setkey, + .encrypt = xts_encrypt, + .decrypt = xts_decrypt, + }, + }, +}; + int __init init(void) { int err; @@ -445,9 +650,20 @@ int __init init(void) err = crypto_register_alg(&blk_ctr_alg); if (err) goto ctr_err; + err = crypto_register_alg(&blk_lrw_alg); + if (err) + goto blk_lrw_err; + err = crypto_register_alg(&blk_xts_alg); + if (err) + goto blk_xts_err; return 0; + crypto_unregister_alg(&blk_xts_alg); +blk_xts_err: + crypto_unregister_alg(&blk_lrw_alg); +blk_lrw_err: + crypto_unregister_alg(&blk_ctr_alg); ctr_err: crypto_unregister_alg(&blk_cbc_alg); cbc_err: @@ -458,6 +674,8 @@ ecb_err: void __exit fini(void) { + crypto_unregister_alg(&blk_xts_alg); + crypto_unregister_alg(&blk_lrw_alg); crypto_unregister_alg(&blk_ctr_alg); crypto_unregister_alg(&blk_cbc_alg); crypto_unregister_alg(&blk_ecb_alg); diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index a6253ec1b284..3e274564f6bf 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -134,7 +134,7 @@ ENTRY(ia32_sysenter_target) CFI_REL_OFFSET rsp,0 pushfq_cfi /*CFI_REL_OFFSET rflags,0*/ - movl 8*3-THREAD_SIZE+TI_sysenter_return(%rsp), %r10d + movl TI_sysenter_return+THREAD_INFO(%rsp,3*8-KERNEL_STACK_OFFSET),%r10d CFI_REGISTER rip,r10 pushq_cfi $__USER32_CS /*CFI_REL_OFFSET cs,0*/ @@ -150,9 +150,8 @@ ENTRY(ia32_sysenter_target) .section __ex_table,"a" .quad 1b,ia32_badarg .previous - GET_THREAD_INFO(%r10) - orl $TS_COMPAT,TI_status(%r10) - testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10) + orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET) + testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) CFI_REMEMBER_STATE jnz sysenter_tracesys cmpq $(IA32_NR_syscalls-1),%rax @@ -162,13 +161,12 @@ sysenter_do_call: sysenter_dispatch: call *ia32_sys_call_table(,%rax,8) movq %rax,RAX-ARGOFFSET(%rsp) - GET_THREAD_INFO(%r10) DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF - testl $_TIF_ALLWORK_MASK,TI_flags(%r10) + testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jnz sysexit_audit sysexit_from_sys_call: - andl $~TS_COMPAT,TI_status(%r10) + andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET) /* clear IF, that popfq doesn't enable interrupts early */ andl $~0x200,EFLAGS-R11(%rsp) movl RIP-R11(%rsp),%edx /* User %eip */ @@ -205,7 +203,7 @@ sysexit_from_sys_call: .endm .macro auditsys_exit exit - testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10) + testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jnz ia32_ret_from_sys_call TRACE_IRQS_ON sti @@ -215,12 +213,11 @@ sysexit_from_sys_call: movzbl %al,%edi /* zero-extend that into %edi */ inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */ call audit_syscall_exit - GET_THREAD_INFO(%r10) movl RAX-ARGOFFSET(%rsp),%eax /* reload syscall return value */ movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi cli TRACE_IRQS_OFF - testl %edi,TI_flags(%r10) + testl %edi,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jz \exit CLEAR_RREGS -ARGOFFSET jmp int_with_check @@ -238,7 +235,7 @@ sysexit_audit: sysenter_tracesys: #ifdef CONFIG_AUDITSYSCALL - testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10) + testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jz sysenter_auditsys #endif SAVE_REST @@ -309,9 +306,8 @@ ENTRY(ia32_cstar_target) .section __ex_table,"a" .quad 1b,ia32_badarg .previous - GET_THREAD_INFO(%r10) - orl $TS_COMPAT,TI_status(%r10) - testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10) + orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET) + testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) CFI_REMEMBER_STATE jnz cstar_tracesys cmpq $IA32_NR_syscalls-1,%rax @@ -321,13 +317,12 @@ cstar_do_call: cstar_dispatch: call *ia32_sys_call_table(,%rax,8) movq %rax,RAX-ARGOFFSET(%rsp) - GET_THREAD_INFO(%r10) DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF - testl $_TIF_ALLWORK_MASK,TI_flags(%r10) + testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jnz sysretl_audit sysretl_from_sys_call: - andl $~TS_COMPAT,TI_status(%r10) + andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET) RESTORE_ARGS 0,-ARG_SKIP,0,0,0 movl RIP-ARGOFFSET(%rsp),%ecx CFI_REGISTER rip,rcx @@ -355,7 +350,7 @@ sysretl_audit: cstar_tracesys: #ifdef CONFIG_AUDITSYSCALL - testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10) + testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jz cstar_auditsys #endif xchgl %r9d,%ebp @@ -420,9 +415,8 @@ ENTRY(ia32_syscall) /* note the registers are not zero extended to the sf. this could be a problem. */ SAVE_ARGS 0,1,0 - GET_THREAD_INFO(%r10) - orl $TS_COMPAT,TI_status(%r10) - testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10) + orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET) + testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jnz ia32_tracesys cmpq $(IA32_NR_syscalls-1),%rax ja ia32_badsys @@ -459,8 +453,8 @@ quiet_ni_syscall: CFI_ENDPROC .macro PTREGSCALL label, func, arg - .globl \label -\label: + ALIGN +GLOBAL(\label) leaq \func(%rip),%rax leaq -ARGOFFSET+8(%rsp),\arg /* 8 for return address */ jmp ia32_ptregs_common @@ -477,7 +471,8 @@ quiet_ni_syscall: PTREGSCALL stub32_vfork, sys_vfork, %rdi PTREGSCALL stub32_iopl, sys_iopl, %rsi -ENTRY(ia32_ptregs_common) + ALIGN +ia32_ptregs_common: popq %r11 CFI_ENDPROC CFI_STARTPROC32 simple diff --git a/arch/x86/include/asm/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h index 091508b533b4..952bd0100c5c 100644 --- a/arch/x86/include/asm/alternative-asm.h +++ b/arch/x86/include/asm/alternative-asm.h @@ -4,10 +4,10 @@ #ifdef CONFIG_SMP .macro LOCK_PREFIX -1: lock +672: lock .section .smp_locks,"a" .balign 4 - .long 1b - . + .long 672b - . .previous .endm #else diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h index 8e41071704a5..49ad773f4b9f 100644 --- a/arch/x86/include/asm/amd_nb.h +++ b/arch/x86/include/asm/amd_nb.h @@ -1,6 +1,7 @@ #ifndef _ASM_X86_AMD_NB_H #define _ASM_X86_AMD_NB_H +#include <linux/ioport.h> #include <linux/pci.h> struct amd_nb_bus_dev_range { @@ -13,6 +14,7 @@ extern const struct pci_device_id amd_nb_misc_ids[]; extern const struct amd_nb_bus_dev_range amd_nb_bus_dev_ranges[]; extern bool early_is_amd_nb(u32 value); +extern struct resource *amd_get_mmconfig_range(struct resource *res); extern int amd_cache_northbridges(void); extern void amd_flush_garts(void); extern int amd_numa_init(void); diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 1a6c09af048f..3ab9bdd87e79 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -176,6 +176,7 @@ static inline u64 native_x2apic_icr_read(void) } extern int x2apic_phys; +extern int x2apic_preenabled; extern void check_x2apic(void); extern void enable_x2apic(void); extern void x2apic_icr_write(u32 low, u32 id); @@ -198,6 +199,9 @@ static inline void x2apic_force_phys(void) x2apic_phys = 1; } #else +static inline void disable_x2apic(void) +{ +} static inline void check_x2apic(void) { } @@ -212,6 +216,7 @@ static inline void x2apic_force_phys(void) { } +#define nox2apic 0 #define x2apic_preenabled 0 #define x2apic_supported() 0 #endif @@ -410,6 +415,7 @@ extern int wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip); #endif #ifdef CONFIG_X86_LOCAL_APIC + static inline u32 apic_read(u32 reg) { return apic->read(reg); diff --git a/arch/x86/include/asm/apic_flat_64.h b/arch/x86/include/asm/apic_flat_64.h new file mode 100644 index 000000000000..a2d312796440 --- /dev/null +++ b/arch/x86/include/asm/apic_flat_64.h @@ -0,0 +1,7 @@ +#ifndef _ASM_X86_APIC_FLAT_64_H +#define _ASM_X86_APIC_FLAT_64_H + +extern void flat_init_apic_ldr(void); + +#endif + diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h index 3925d8007864..134bba00df09 100644 --- a/arch/x86/include/asm/apicdef.h +++ b/arch/x86/include/asm/apicdef.h @@ -144,6 +144,7 @@ #define APIC_BASE (fix_to_virt(FIX_APIC_BASE)) #define APIC_BASE_MSR 0x800 +#define XAPIC_ENABLE (1UL << 11) #define X2APIC_ENABLE (1UL << 10) #ifdef CONFIG_X86_32 diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h index 1775d6e5920e..b97596e2b68c 100644 --- a/arch/x86/include/asm/bitops.h +++ b/arch/x86/include/asm/bitops.h @@ -380,6 +380,8 @@ static inline unsigned long __fls(unsigned long word) return word; } +#undef ADDR + #ifdef __KERNEL__ /** * ffs - find first set bit in word @@ -395,10 +397,25 @@ static inline unsigned long __fls(unsigned long word) static inline int ffs(int x) { int r; -#ifdef CONFIG_X86_CMOV + +#ifdef CONFIG_X86_64 + /* + * AMD64 says BSFL won't clobber the dest reg if x==0; Intel64 says the + * dest reg is undefined if x==0, but their CPU architect says its + * value is written to set it to the same as before, except that the + * top 32 bits will be cleared. + * + * We cannot do this on 32 bits because at the very least some + * 486 CPUs did not behave this way. + */ + long tmp = -1; + asm("bsfl %1,%0" + : "=r" (r) + : "rm" (x), "0" (tmp)); +#elif defined(CONFIG_X86_CMOV) asm("bsfl %1,%0\n\t" "cmovzl %2,%0" - : "=r" (r) : "rm" (x), "r" (-1)); + : "=&r" (r) : "rm" (x), "r" (-1)); #else asm("bsfl %1,%0\n\t" "jnz 1f\n\t" @@ -422,7 +439,22 @@ static inline int ffs(int x) static inline int fls(int x) { int r; -#ifdef CONFIG_X86_CMOV + +#ifdef CONFIG_X86_64 + /* + * AMD64 says BSRL won't clobber the dest reg if x==0; Intel64 says the + * dest reg is undefined if x==0, but their CPU architect says its + * value is written to set it to the same as before, except that the + * top 32 bits will be cleared. + * + * We cannot do this on 32 bits because at the very least some + * 486 CPUs did not behave this way. + */ + long tmp = -1; + asm("bsrl %1,%0" + : "=r" (r) + : "rm" (x), "0" (tmp)); +#elif defined(CONFIG_X86_CMOV) asm("bsrl %1,%0\n\t" "cmovzl %2,%0" : "=&r" (r) : "rm" (x), "rm" (-1)); @@ -434,11 +466,35 @@ static inline int fls(int x) #endif return r + 1; } -#endif /* __KERNEL__ */ - -#undef ADDR -#ifdef __KERNEL__ +/** + * fls64 - find last set bit in a 64-bit word + * @x: the word to search + * + * This is defined in a similar way as the libc and compiler builtin + * ffsll, but returns the position of the most significant set bit. + * + * fls64(value) returns 0 if value is 0 or the position of the last + * set bit if value is nonzero. The last (most significant) bit is + * at position 64. + */ +#ifdef CONFIG_X86_64 +static __always_inline int fls64(__u64 x) +{ + long bitpos = -1; + /* + * AMD64 says BSRQ won't clobber the dest reg if x==0; Intel64 says the + * dest reg is undefined if x==0, but their CPU architect says its + * value is written to set it to the same as before. + */ + asm("bsrq %1,%0" + : "+r" (bitpos) + : "rm" (x)); + return bitpos + 1; +} +#else +#include <asm-generic/bitops/fls64.h> +#endif #include <asm-generic/bitops/find.h> @@ -450,12 +506,6 @@ static inline int fls(int x) #include <asm-generic/bitops/const_hweight.h> -#endif /* __KERNEL__ */ - -#include <asm-generic/bitops/fls64.h> - -#ifdef __KERNEL__ - #include <asm-generic/bitops/le.h> #include <asm-generic/bitops/ext2-atomic-setbit.h> diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h index 5d3acdf5a7a6..0c9fa2745f13 100644 --- a/arch/x86/include/asm/cmpxchg.h +++ b/arch/x86/include/asm/cmpxchg.h @@ -14,6 +14,8 @@ extern void __cmpxchg_wrong_size(void) __compiletime_error("Bad argument size for cmpxchg"); extern void __xadd_wrong_size(void) __compiletime_error("Bad argument size for xadd"); +extern void __add_wrong_size(void) + __compiletime_error("Bad argument size for add"); /* * Constants for operation sizes. On 32-bit, the 64-bit size it set to @@ -31,60 +33,47 @@ extern void __xadd_wrong_size(void) #define __X86_CASE_Q -1 /* sizeof will never return -1 */ #endif +/* + * An exchange-type operation, which takes a value and a pointer, and + * returns a the old value. + */ +#define __xchg_op(ptr, arg, op, lock) \ + ({ \ + __typeof__ (*(ptr)) __ret = (arg); \ + switch (sizeof(*(ptr))) { \ + case __X86_CASE_B: \ + asm volatile (lock #op "b %b0, %1\n" \ + : "+r" (__ret), "+m" (*(ptr)) \ + : : "memory", "cc"); \ + break; \ + case __X86_CASE_W: \ + asm volatile (lock #op "w %w0, %1\n" \ + : "+r" (__ret), "+m" (*(ptr)) \ + : : "memory", "cc"); \ + break; \ + case __X86_CASE_L: \ + asm volatile (lock #op "l %0, %1\n" \ + : "+r" (__ret), "+m" (*(ptr)) \ + : : "memory", "cc"); \ + break; \ + case __X86_CASE_Q: \ + asm volatile (lock #op "q %q0, %1\n" \ + : "+r" (__ret), "+m" (*(ptr)) \ + : : "memory", "cc"); \ + break; \ + default: \ + __ ## op ## _wrong_size(); \ + } \ + __ret; \ + }) + /* * Note: no "lock" prefix even on SMP: xchg always implies lock anyway. * Since this is generally used to protect other memory information, we * use "asm volatile" and "memory" clobbers to prevent gcc from moving * information around. */ -#define __xchg(x, ptr, size) \ -({ \ - __typeof(*(ptr)) __x = (x); \ - switch (size) { \ - case __X86_CASE_B: \ - { \ - volatile u8 *__ptr = (volatile u8 *)(ptr); \ - asm volatile("xchgb %0,%1" \ - : "=q" (__x), "+m" (*__ptr) \ - : "0" (__x) \ - : "memory"); \ - break; \ - } \ - case __X86_CASE_W: \ - { \ - volatile u16 *__ptr = (volatile u16 *)(ptr); \ - asm volatile("xchgw %0,%1" \ - : "=r" (__x), "+m" (*__ptr) \ - : "0" (__x) \ - : "memory"); \ - break; \ - } \ - case __X86_CASE_L: \ - { \ - volatile u32 *__ptr = (volatile u32 *)(ptr); \ - asm volatile("xchgl %0,%1" \ - : "=r" (__x), "+m" (*__ptr) \ - : "0" (__x) \ - : "memory"); \ - break; \ - } \ - case __X86_CASE_Q: \ - { \ - volatile u64 *__ptr = (volatile u64 *)(ptr); \ - asm volatile("xchgq %0,%1" \ - : "=r" (__x), "+m" (*__ptr) \ - : "0" (__x) \ - : "memory"); \ - break; \ - } \ - default: \ - __xchg_wrong_size(); \ - } \ - __x; \ -}) - -#define xchg(ptr, v) \ - __xchg((v), (ptr), sizeof(*ptr)) +#define xchg(ptr, v) __xchg_op((ptr), (v), xchg, "") /* * Atomic compare and exchange. Compare OLD with MEM, if identical, @@ -165,46 +154,80 @@ extern void __xadd_wrong_size(void) __cmpxchg_local((ptr), (old), (new), sizeof(*ptr)) #endif -#define __xadd(ptr, inc, lock) \ +/* + * xadd() adds "inc" to "*ptr" and atomically returns the previous + * value of "*ptr". + * + * xadd() is locked when multiple CPUs are online + * xadd_sync() is always locked + * xadd_local() is never locked + */ +#define __xadd(ptr, inc, lock) __xchg_op((ptr), (inc), xadd, lock) +#define xadd(ptr, inc) __xadd((ptr), (inc), LOCK_PREFIX) +#define xadd_sync(ptr, inc) __xadd((ptr), (inc), "lock; ") +#define xadd_local(ptr, inc) __xadd((ptr), (inc), "") + +#define __add(ptr, inc, lock) \ ({ \ __typeof__ (*(ptr)) __ret = (inc); \ switch (sizeof(*(ptr))) { \ case __X86_CASE_B: \ - asm volatile (lock "xaddb %b0, %1\n" \ - : "+r" (__ret), "+m" (*(ptr)) \ - : : "memory", "cc"); \ + asm volatile (lock "addb %b1, %0\n" \ + : "+m" (*(ptr)) : "ri" (inc) \ + : "memory", "cc"); \ break; \ case __X86_CASE_W: \ - asm volatile (lock "xaddw %w0, %1\n" \ - : "+r" (__ret), "+m" (*(ptr)) \ - : : "memory", "cc"); \ + asm volatile (lock "addw %w1, %0\n" \ + : "+m" (*(ptr)) : "ri" (inc) \ + : "memory", "cc"); \ break; \ case __X86_CASE_L: \ - asm volatile (lock "xaddl %0, %1\n" \ - : "+r" (__ret), "+m" (*(ptr)) \ - : : "memory", "cc"); \ + asm volatile (lock "addl %1, %0\n" \ + : "+m" (*(ptr)) : "ri" (inc) \ + : "memory", "cc"); \ break; \ case __X86_CASE_Q: \ - asm volatile (lock "xaddq %q0, %1\n" \ - : "+r" (__ret), "+m" (*(ptr)) \ - : : "memory", "cc"); \ + asm volatile (lock "addq %1, %0\n" \ + : "+m" (*(ptr)) : "ri" (inc) \ + : "memory", "cc"); \ break; \ default: \ - __xadd_wrong_size(); \ + __add_wrong_size(); \ } \ __ret; \ }) /* - * xadd() adds "inc" to "*ptr" and atomically returns the previous - * value of "*ptr". + * add_*() adds "inc" to "*ptr" * - * xadd() is locked when multiple CPUs are online - * xadd_sync() is always locked - * xadd_local() is never locked + * __add() takes a lock prefix + * add_smp() is locked when multiple CPUs are online + * add_sync() is always locked */ -#define xadd(ptr, inc) __xadd((ptr), (inc), LOCK_PREFIX) -#define xadd_sync(ptr, inc) __xadd((ptr), (inc), "lock; ") -#define xadd_local(ptr, inc) __xadd((ptr), (inc), "") +#define add_smp(ptr, inc) __add((ptr), (inc), LOCK_PREFIX) +#define add_sync(ptr, inc) __add((ptr), (inc), "lock; ") + +#define __cmpxchg_double(pfx, p1, p2, o1, o2, n1, n2) \ +({ \ + bool __ret; \ + __typeof__(*(p1)) __old1 = (o1), __new1 = (n1); \ + __typeof__(*(p2)) __old2 = (o2), __new2 = (n2); \ + BUILD_BUG_ON(sizeof(*(p1)) != sizeof(long)); \ + BUILD_BUG_ON(sizeof(*(p2)) != sizeof(long)); \ + VM_BUG_ON((unsigned long)(p1) % (2 * sizeof(long))); \ + VM_BUG_ON((unsigned long)((p1) + 1) != (unsigned long)(p2)); \ + asm volatile(pfx "cmpxchg%c4b %2; sete %0" \ + : "=a" (__ret), "+d" (__old2), \ + "+m" (*(p1)), "+m" (*(p2)) \ + : "i" (2 * sizeof(long)), "a" (__old1), \ + "b" (__new1), "c" (__new2)); \ + __ret; \ +}) + +#define cmpxchg_double(p1, p2, o1, o2, n1, n2) \ + __cmpxchg_double(LOCK_PREFIX, p1, p2, o1, o2, n1, n2) + +#define cmpxchg_double_local(p1, p2, o1, o2, n1, n2) \ + __cmpxchg_double(, p1, p2, o1, o2, n1, n2) #endif /* ASM_X86_CMPXCHG_H */ diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h index fbebb07dd80b..53f4b219336b 100644 --- a/arch/x86/include/asm/cmpxchg_32.h +++ b/arch/x86/include/asm/cmpxchg_32.h @@ -166,52 +166,6 @@ static inline unsigned long cmpxchg_386(volatile void *ptr, unsigned long old, #endif -#define cmpxchg8b(ptr, o1, o2, n1, n2) \ -({ \ - char __ret; \ - __typeof__(o2) __dummy; \ - __typeof__(*(ptr)) __old1 = (o1); \ - __typeof__(o2) __old2 = (o2); \ - __typeof__(*(ptr)) __new1 = (n1); \ - __typeof__(o2) __new2 = (n2); \ - asm volatile(LOCK_PREFIX "cmpxchg8b %2; setz %1" \ - : "=d"(__dummy), "=a" (__ret), "+m" (*ptr)\ - : "a" (__old1), "d"(__old2), \ - "b" (__new1), "c" (__new2) \ - : "memory"); \ - __ret; }) - - -#define cmpxchg8b_local(ptr, o1, o2, n1, n2) \ -({ \ - char __ret; \ - __typeof__(o2) __dummy; \ - __typeof__(*(ptr)) __old1 = (o1); \ - __typeof__(o2) __old2 = (o2); \ - __typeof__(*(ptr)) __new1 = (n1); \ - __typeof__(o2) __new2 = (n2); \ - asm volatile("cmpxchg8b %2; setz %1" \ - : "=d"(__dummy), "=a"(__ret), "+m" (*ptr)\ - : "a" (__old), "d"(__old2), \ - "b" (__new1), "c" (__new2), \ - : "memory"); \ - __ret; }) - - -#define cmpxchg_double(ptr, o1, o2, n1, n2) \ -({ \ - BUILD_BUG_ON(sizeof(*(ptr)) != 4); \ - VM_BUG_ON((unsigned long)(ptr) % 8); \ - cmpxchg8b((ptr), (o1), (o2), (n1), (n2)); \ -}) - -#define cmpxchg_double_local(ptr, o1, o2, n1, n2) \ -({ \ - BUILD_BUG_ON(sizeof(*(ptr)) != 4); \ - VM_BUG_ON((unsigned long)(ptr) % 8); \ - cmpxchg16b_local((ptr), (o1), (o2), (n1), (n2)); \ -}) - #define system_has_cmpxchg_double() cpu_has_cx8 #endif /* _ASM_X86_CMPXCHG_32_H */ diff --git a/arch/x86/include/asm/cmpxchg_64.h b/arch/x86/include/asm/cmpxchg_64.h index 285da02c38fa..614be87f1a9b 100644 --- a/arch/x86/include/asm/cmpxchg_64.h +++ b/arch/x86/include/asm/cmpxchg_64.h @@ -20,49 +20,6 @@ static inline void set_64bit(volatile u64 *ptr, u64 val) cmpxchg_local((ptr), (o), (n)); \ }) -#define cmpxchg16b(ptr, o1, o2, n1, n2) \ -({ \ - char __ret; \ - __typeof__(o2) __junk; \ - __typeof__(*(ptr)) __old1 = (o1); \ - __typeof__(o2) __old2 = (o2); \ - __typeof__(*(ptr)) __new1 = (n1); \ - __typeof__(o2) __new2 = (n2); \ - asm volatile(LOCK_PREFIX "cmpxchg16b %2;setz %1" \ - : "=d"(__junk), "=a"(__ret), "+m" (*ptr) \ - : "b"(__new1), "c"(__new2), \ - "a"(__old1), "d"(__old2)); \ - __ret; }) - - -#define cmpxchg16b_local(ptr, o1, o2, n1, n2) \ -({ \ - char __ret; \ - __typeof__(o2) __junk; \ - __typeof__(*(ptr)) __old1 = (o1); \ - __typeof__(o2) __old2 = (o2); \ - __typeof__(*(ptr)) __new1 = (n1); \ - __typeof__(o2) __new2 = (n2); \ - asm volatile("cmpxchg16b %2;setz %1" \ - : "=d"(__junk), "=a"(__ret), "+m" (*ptr) \ - : "b"(__new1), "c"(__new2), \ - "a"(__old1), "d"(__old2)); \ - __ret; }) - -#define cmpxchg_double(ptr, o1, o2, n1, n2) \ -({ \ - BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ - VM_BUG_ON((unsigned long)(ptr) % 16); \ - cmpxchg16b((ptr), (o1), (o2), (n1), (n2)); \ -}) - -#define cmpxchg_double_local(ptr, o1, o2, n1, n2) \ -({ \ - BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ - VM_BUG_ON((unsigned long)(ptr) % 16); \ - cmpxchg16b_local((ptr), (o1), (o2), (n1), (n2)); \ -}) - #define system_has_cmpxchg_double() cpu_has_cx16 #endif /* _ASM_X86_CMPXCHG_64_H */ diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index f3444f700f36..17c5d4bdee5e 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -197,7 +197,10 @@ /* Intel-defined CPU features, CPUID level 0x00000007:0 (ebx), word 9 */ #define X86_FEATURE_FSGSBASE (9*32+ 0) /* {RD/WR}{FS/GS}BASE instructions*/ +#define X86_FEATURE_BMI1 (9*32+ 3) /* 1st group bit manipulation extensions */ +#define X86_FEATURE_AVX2 (9*32+ 5) /* AVX2 instructions */ #define X86_FEATURE_SMEP (9*32+ 7) /* Supervisor Mode Execution Protection */ +#define X86_FEATURE_BMI2 (9*32+ 8) /* 2nd group bit manipulation extensions */ #define X86_FEATURE_ERMS (9*32+ 9) /* Enhanced REP MOVSB/STOSB */ #if defined(__KERNEL__) && !defined(__ASSEMBLY__) diff --git a/arch/x86/include/asm/div64.h b/arch/x86/include/asm/div64.h index 9a2d644c08ef..ced283ac79df 100644 --- a/arch/x86/include/asm/div64.h +++ b/arch/x86/include/asm/div64.h @@ -4,6 +4,7 @@ #ifdef CONFIG_X86_32 #include <linux/types.h> +#include <linux/log2.h> /* * do_div() is NOT a C function. It wants to return @@ -21,15 +22,20 @@ ({ \ unsigned long __upper, __low, __high, __mod, __base; \ __base = (base); \ - asm("":"=a" (__low), "=d" (__high) : "A" (n)); \ - __upper = __high; \ - if (__high) { \ - __upper = __high % (__base); \ - __high = __high / (__base); \ + if (__builtin_constant_p(__base) && is_power_of_2(__base)) { \ + __mod = n & (__base - 1); \ + n >>= ilog2(__base); \ + } else { \ + asm("" : "=a" (__low), "=d" (__high) : "A" (n));\ + __upper = __high; \ + if (__high) { \ + __upper = __high % (__base); \ + __high = __high / (__base); \ + } \ + asm("divl %2" : "=a" (__low), "=d" (__mod) \ + : "rm" (__base), "0" (__low), "1" (__upper)); \ + asm("" : "=A" (n) : "a" (__low), "d" (__high)); \ } \ - asm("divl %2":"=a" (__low), "=d" (__mod) \ - : "rm" (__base), "0" (__low), "1" (__upper)); \ - asm("":"=A" (n) : "a" (__low), "d" (__high)); \ __mod; \ }) diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h index 908b96957d88..37782566af24 100644 --- a/arch/x86/include/asm/e820.h +++ b/arch/x86/include/asm/e820.h @@ -117,7 +117,7 @@ static inline void early_memtest(unsigned long start, unsigned long end) extern unsigned long e820_end_of_ram_pfn(void); extern unsigned long e820_end_of_low_ram_pfn(void); -extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align); +extern u64 early_reserve_e820(u64 sizet, u64 align); void memblock_x86_fill(void); void memblock_find_dma_reserve(void); diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h index 55e4de613f0e..da0b3ca815b7 100644 --- a/arch/x86/include/asm/hardirq.h +++ b/arch/x86/include/asm/hardirq.h @@ -11,6 +11,7 @@ typedef struct { #ifdef CONFIG_X86_LOCAL_APIC unsigned int apic_timer_irqs; /* arch dependent */ unsigned int irq_spurious_count; + unsigned int icr_read_retry_count; #endif unsigned int x86_platform_ipis; /* arch dependent */ unsigned int apic_perf_irqs; diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h index c9e09ea05644..6919e936345b 100644 --- a/arch/x86/include/asm/i387.h +++ b/arch/x86/include/asm/i387.h @@ -218,7 +218,7 @@ static inline void fpu_fxsave(struct fpu *fpu) #ifdef CONFIG_SMP #define safe_address (__per_cpu_offset[0]) #else -#define safe_address (kstat_cpu(0).cpustat.user) +#define safe_address (__get_cpu_var(kernel_cpustat).cpustat[CPUTIME_USER]) #endif /* diff --git a/arch/x86/include/asm/insn.h b/arch/x86/include/asm/insn.h index 88c765e16410..74df3f1eddfd 100644 --- a/arch/x86/include/asm/insn.h +++ b/arch/x86/include/asm/insn.h @@ -137,6 +137,13 @@ static inline int insn_is_avx(struct insn *insn) return (insn->vex_prefix.value != 0); } +/* Ensure this instruction is decoded completely */ +static inline int insn_complete(struct insn *insn) +{ + return insn->opcode.got && insn->modrm.got && insn->sib.got && + insn->displacement.got && insn->immediate.got; +} + static inline insn_byte_t insn_vex_m_bits(struct insn *insn) { if (insn->vex_prefix.nbytes == 2) /* 2 bytes VEX */ diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h index 4420993acc47..925b605eb5c6 100644 --- a/arch/x86/include/asm/intel_scu_ipc.h +++ b/arch/x86/include/asm/intel_scu_ipc.h @@ -3,11 +3,15 @@ #include <linux/notifier.h> -#define IPCMSG_VRTC 0xFA /* Set vRTC device */ - -/* Command id associated with message IPCMSG_VRTC */ -#define IPC_CMD_VRTC_SETTIME 1 /* Set time */ -#define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */ +#define IPCMSG_WARM_RESET 0xF0 +#define IPCMSG_COLD_RESET 0xF1 +#define IPCMSG_SOFT_RESET 0xF2 +#define IPCMSG_COLD_BOOT 0xF3 + +#define IPCMSG_VRTC 0xFA /* Set vRTC device */ + /* Command id associated with message IPCMSG_VRTC */ + #define IPC_CMD_VRTC_SETTIME 1 /* Set time */ + #define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */ /* Read single register */ int intel_scu_ipc_ioread8(u16 addr, u8 *data); diff --git a/arch/x86/include/asm/iommu.h b/arch/x86/include/asm/iommu.h index 345c99cef152..dffc38ee6255 100644 --- a/arch/x86/include/asm/iommu.h +++ b/arch/x86/include/asm/iommu.h @@ -5,6 +5,7 @@ extern struct dma_map_ops nommu_dma_ops; extern int force_iommu, no_iommu; extern int iommu_detected; extern int iommu_pass_through; +extern int iommu_group_mf; /* 10 seconds */ #define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000) diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h index a026507893e9..ab4092e3214e 100644 --- a/arch/x86/include/asm/kvm_emulate.h +++ b/arch/x86/include/asm/kvm_emulate.h @@ -181,6 +181,7 @@ struct x86_emulate_ops { int (*set_dr)(struct x86_emulate_ctxt *ctxt, int dr, ulong value); int (*set_msr)(struct x86_emulate_ctxt *ctxt, u32 msr_index, u64 data); int (*get_msr)(struct x86_emulate_ctxt *ctxt, u32 msr_index, u64 *pdata); + int (*read_pmc)(struct x86_emulate_ctxt *ctxt, u32 pmc, u64 *pdata); void (*halt)(struct x86_emulate_ctxt *ctxt); void (*wbinvd)(struct x86_emulate_ctxt *ctxt); int (*fix_hypercall)(struct x86_emulate_ctxt *ctxt); @@ -364,6 +365,7 @@ enum x86_intercept { #endif int x86_decode_insn(struct x86_emulate_ctxt *ctxt, void *insn, int insn_len); +bool x86_page_table_writing_insn(struct x86_emulate_ctxt *ctxt); #define EMULATION_FAILED -1 #define EMULATION_OK 0 #define EMULATION_RESTART 1 diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index b4973f4dab98..52d6640a5ca1 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -16,10 +16,12 @@ #include <linux/mmu_notifier.h> #include <linux/tracepoint.h> #include <linux/cpumask.h> +#include <linux/irq_work.h> #include <linux/kvm.h> #include <linux/kvm_para.h> #include <linux/kvm_types.h> +#include <linux/perf_event.h> #include <asm/pvclock-abi.h> #include <asm/desc.h> @@ -31,6 +33,8 @@ #define KVM_MEMORY_SLOTS 32 /* memory slots that does not exposed to userspace */ #define KVM_PRIVATE_MEM_SLOTS 4 +#define KVM_MEM_SLOTS_NUM (KVM_MEMORY_SLOTS + KVM_PRIVATE_MEM_SLOTS) + #define KVM_MMIO_SIZE 16 #define KVM_PIO_PAGE_OFFSET 1 @@ -228,7 +232,7 @@ struct kvm_mmu_page { * One bit set per slot which has memory * in this shadow page. */ - DECLARE_BITMAP(slot_bitmap, KVM_MEMORY_SLOTS + KVM_PRIVATE_MEM_SLOTS); + DECLARE_BITMAP(slot_bitmap, KVM_MEM_SLOTS_NUM); bool unsync; int root_count; /* Currently serving as active root */ unsigned int unsync_children; @@ -239,14 +243,9 @@ struct kvm_mmu_page { int clear_spte_count; #endif - struct rcu_head rcu; -}; + int write_flooding_count; -struct kvm_pv_mmu_op_buffer { - void *ptr; - unsigned len; - unsigned processed; - char buf[512] __aligned(sizeof(long)); + struct rcu_head rcu; }; struct kvm_pio_request { @@ -294,6 +293,37 @@ struct kvm_mmu { u64 pdptrs[4]; /* pae */ }; +enum pmc_type { + KVM_PMC_GP = 0, + KVM_PMC_FIXED, +}; + +struct kvm_pmc { + enum pmc_type type; + u8 idx; + u64 counter; + u64 eventsel; + struct perf_event *perf_event; + struct kvm_vcpu *vcpu; +}; + +struct kvm_pmu { + unsigned nr_arch_gp_counters; + unsigned nr_arch_fixed_counters; + unsigned available_event_types; + u64 fixed_ctr_ctrl; + u64 global_ctrl; + u64 global_status; + u64 global_ovf_ctrl; + u64 counter_bitmask[2]; + u64 global_ctrl_mask; + u8 version; + struct kvm_pmc gp_counters[X86_PMC_MAX_GENERIC]; + struct kvm_pmc fixed_counters[X86_PMC_MAX_FIXED]; + struct irq_work irq_work; + u64 reprogram_pmi; +}; + struct kvm_vcpu_arch { /* * rip and regs accesses must go through @@ -345,19 +375,10 @@ struct kvm_vcpu_arch { */ struct kvm_mmu *walk_mmu; - /* only needed in kvm_pv_mmu_op() path, but it's hot so - * put it here to avoid allocation */ - struct kvm_pv_mmu_op_buffer mmu_op_buffer; - struct kvm_mmu_memory_cache mmu_pte_list_desc_cache; struct kvm_mmu_memory_cache mmu_page_cache; struct kvm_mmu_memory_cache mmu_page_header_cache; - gfn_t last_pt_write_gfn; - int last_pt_write_count; - u64 *last_pte_updated; - gfn_t last_pte_gfn; - struct fpu guest_fpu; u64 xcr0; @@ -436,6 +457,8 @@ struct kvm_vcpu_arch { unsigned access; gfn_t mmio_gfn; + struct kvm_pmu pmu; + /* used for guest single stepping over the given code position */ unsigned long singlestep_rip; @@ -444,6 +467,9 @@ struct kvm_vcpu_arch { cpumask_var_t wbinvd_dirty_mask; + unsigned long last_retry_eip; + unsigned long last_retry_addr; + struct { bool halted; gfn_t gfns[roundup_pow_of_two(ASYNC_PF_PER_VCPU)]; @@ -459,7 +485,6 @@ struct kvm_arch { unsigned int n_requested_mmu_pages; unsigned int n_max_mmu_pages; unsigned int indirect_shadow_pages; - atomic_t invlpg_counter; struct hlist_head mmu_page_hash[KVM_NUM_MMU_PAGES]; /* * Hash table of struct kvm_mmu_page. @@ -660,6 +685,8 @@ void kvm_mmu_set_mask_ptes(u64 user_mask, u64 accessed_mask, int kvm_mmu_reset_context(struct kvm_vcpu *vcpu); void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot); +int kvm_mmu_rmap_write_protect(struct kvm *kvm, u64 gfn, + struct kvm_memory_slot *slot); void kvm_mmu_zap_all(struct kvm *kvm); unsigned int kvm_mmu_calculate_mmu_pages(struct kvm *kvm); void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned int kvm_nr_mmu_pages); @@ -668,8 +695,6 @@ int load_pdptrs(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu, unsigned long cr3); int emulator_write_phys(struct kvm_vcpu *vcpu, gpa_t gpa, const void *val, int bytes); -int kvm_pv_mmu_op(struct kvm_vcpu *vcpu, unsigned long bytes, - gpa_t addr, unsigned long *ret); u8 kvm_get_guest_memory_type(struct kvm_vcpu *vcpu, gfn_t gfn); extern bool tdp_enabled; @@ -692,6 +717,7 @@ enum emulation_result { #define EMULTYPE_NO_DECODE (1 << 0) #define EMULTYPE_TRAP_UD (1 << 1) #define EMULTYPE_SKIP (1 << 2) +#define EMULTYPE_RETRY (1 << 3) int x86_emulate_instruction(struct kvm_vcpu *vcpu, unsigned long cr2, int emulation_type, void *insn, int insn_len); @@ -734,6 +760,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data); unsigned long kvm_get_rflags(struct kvm_vcpu *vcpu); void kvm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags); +bool kvm_rdpmc(struct kvm_vcpu *vcpu); void kvm_queue_exception(struct kvm_vcpu *vcpu, unsigned nr); void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code); @@ -754,13 +781,14 @@ int fx_init(struct kvm_vcpu *vcpu); void kvm_mmu_flush_tlb(struct kvm_vcpu *vcpu); void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa, - const u8 *new, int bytes, - bool guest_initiated); + const u8 *new, int bytes); +int kvm_mmu_unprotect_page(struct kvm *kvm, gfn_t gfn); int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva); void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu); int kvm_mmu_load(struct kvm_vcpu *vcpu); void kvm_mmu_unload(struct kvm_vcpu *vcpu); void kvm_mmu_sync_roots(struct kvm_vcpu *vcpu); +gpa_t translate_nested_gpa(struct kvm_vcpu *vcpu, gpa_t gpa, u32 access); gpa_t kvm_mmu_gva_to_gpa_read(struct kvm_vcpu *vcpu, gva_t gva, struct x86_exception *exception); gpa_t kvm_mmu_gva_to_gpa_fetch(struct kvm_vcpu *vcpu, gva_t gva, @@ -782,6 +810,11 @@ void kvm_disable_tdp(void); int complete_pio(struct kvm_vcpu *vcpu); bool kvm_check_iopl(struct kvm_vcpu *vcpu); +static inline gpa_t translate_gpa(struct kvm_vcpu *vcpu, gpa_t gpa, u32 access) +{ + return gpa; +} + static inline struct kvm_mmu_page *page_header(hpa_t shadow_page) { struct page *page = pfn_to_page(shadow_page >> PAGE_SHIFT); @@ -894,4 +927,17 @@ extern bool kvm_find_async_pf_gfn(struct kvm_vcpu *vcpu, gfn_t gfn); void kvm_complete_insn_gp(struct kvm_vcpu *vcpu, int err); +int kvm_is_in_guest(void); + +void kvm_pmu_init(struct kvm_vcpu *vcpu); +void kvm_pmu_destroy(struct kvm_vcpu *vcpu); +void kvm_pmu_reset(struct kvm_vcpu *vcpu); +void kvm_pmu_cpuid_update(struct kvm_vcpu *vcpu); +bool kvm_pmu_msr(struct kvm_vcpu *vcpu, u32 msr); +int kvm_pmu_get_msr(struct kvm_vcpu *vcpu, u32 msr, u64 *data); +int kvm_pmu_set_msr(struct kvm_vcpu *vcpu, u32 msr, u64 data); +int kvm_pmu_read_pmc(struct kvm_vcpu *vcpu, unsigned pmc, u64 *data); +void kvm_handle_pmu_event(struct kvm_vcpu *vcpu); +void kvm_deliver_pmi(struct kvm_vcpu *vcpu); + #endif /* _ASM_X86_KVM_HOST_H */ diff --git a/arch/x86/include/asm/mach_timer.h b/arch/x86/include/asm/mach_timer.h index 853728519ae9..88d0c3c74c13 100644 --- a/arch/x86/include/asm/mach_timer.h +++ b/arch/x86/include/asm/mach_timer.h @@ -15,7 +15,7 @@ #define CALIBRATE_TIME_MSEC 30 /* 30 msecs */ #define CALIBRATE_LATCH \ - ((CLOCK_TICK_RATE * CALIBRATE_TIME_MSEC + 1000/2)/1000) + ((PIT_TICK_RATE * CALIBRATE_TIME_MSEC + 1000/2)/1000) static inline void mach_prepare_counter(void) { diff --git a/arch/x86/include/asm/mc146818rtc.h b/arch/x86/include/asm/mc146818rtc.h index 01fdf5674e24..0e8e85bb7c51 100644 --- a/arch/x86/include/asm/mc146818rtc.h +++ b/arch/x86/include/asm/mc146818rtc.h @@ -81,8 +81,8 @@ static inline unsigned char current_lock_cmos_reg(void) #else #define lock_cmos_prefix(reg) do {} while (0) #define lock_cmos_suffix(reg) do {} while (0) -#define lock_cmos(reg) -#define unlock_cmos() +#define lock_cmos(reg) do { } while (0) +#define unlock_cmos() do { } while (0) #define do_i_have_lock_cmos() 0 #define current_lock_cmos_reg() 0 #endif diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 0e8ae57d3656..f35ce43c1a77 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -50,10 +50,11 @@ #define MCJ_CTX_MASK 3 #define MCJ_CTX(flags) ((flags) & MCJ_CTX_MASK) #define MCJ_CTX_RANDOM 0 /* inject context: random */ -#define MCJ_CTX_PROCESS 1 /* inject context: process */ -#define MCJ_CTX_IRQ 2 /* inject context: IRQ */ -#define MCJ_NMI_BROADCAST 4 /* do NMI broadcasting */ -#define MCJ_EXCEPTION 8 /* raise as exception */ +#define MCJ_CTX_PROCESS 0x1 /* inject context: process */ +#define MCJ_CTX_IRQ 0x2 /* inject context: IRQ */ +#define MCJ_NMI_BROADCAST 0x4 /* do NMI broadcasting */ +#define MCJ_EXCEPTION 0x8 /* raise as exception */ +#define MCJ_IRQ_BRAODCAST 0x10 /* do IRQ broadcasting */ /* Fields are zero when not available */ struct mce { @@ -120,7 +121,8 @@ struct mce_log { #ifdef __KERNEL__ -extern struct atomic_notifier_head x86_mce_decoder_chain; +extern void mce_register_decode_chain(struct notifier_block *nb); +extern void mce_unregister_decode_chain(struct notifier_block *nb); #include <linux/percpu.h> #include <linux/init.h> @@ -149,7 +151,7 @@ static inline void enable_p5_mce(void) {} void mce_setup(struct mce *m); void mce_log(struct mce *m); -DECLARE_PER_CPU(struct sys_device, mce_sysdev); +DECLARE_PER_CPU(struct device, mce_device); /* * Maximum banks number. diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h deleted file mode 100644 index 0cd3800f33b9..000000000000 --- a/arch/x86/include/asm/memblock.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _X86_MEMBLOCK_H -#define _X86_MEMBLOCK_H - -#define ARCH_DISCARD_MEMBLOCK - -u64 memblock_x86_find_in_range_size(u64 start, u64 *sizep, u64 align); - -void memblock_x86_reserve_range(u64 start, u64 end, char *name); -void memblock_x86_free_range(u64 start, u64 end); -struct range; -int __get_free_all_memory_range(struct range **range, int nodeid, - unsigned long start_pfn, unsigned long end_pfn); -int get_free_all_memory_range(struct range **rangep, int nodeid); - -void memblock_x86_register_active_regions(int nid, unsigned long start_pfn, - unsigned long last_pfn); -u64 memblock_x86_hole_size(u64 start, u64 end); -u64 memblock_x86_find_in_range_node(int nid, u64 start, u64 end, u64 size, u64 align); -u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit); -u64 memblock_x86_memory_in_range(u64 addr, u64 limit); -bool memblock_x86_check_reserved_size(u64 *addrp, u64 *sizep, u64 align); - -#endif diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h index 24215072d0e1..4ebe157bf73d 100644 --- a/arch/x86/include/asm/microcode.h +++ b/arch/x86/include/asm/microcode.h @@ -48,6 +48,7 @@ static inline struct microcode_ops * __init init_intel_microcode(void) #ifdef CONFIG_MICROCODE_AMD extern struct microcode_ops * __init init_amd_microcode(void); +extern void __exit exit_amd_microcode(void); static inline void get_ucode_data(void *to, const u8 *from, size_t n) { @@ -59,6 +60,7 @@ static inline struct microcode_ops * __init init_amd_microcode(void) { return NULL; } +static inline void __exit exit_amd_microcode(void) {} #endif #endif /* _ASM_X86_MICROCODE_H */ diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h index e6283129c821..0a0a95460434 100644 --- a/arch/x86/include/asm/mrst.h +++ b/arch/x86/include/asm/mrst.h @@ -31,11 +31,20 @@ enum mrst_cpu_type { }; extern enum mrst_cpu_type __mrst_cpu_chip; + +#ifdef CONFIG_X86_INTEL_MID + static inline enum mrst_cpu_type mrst_identify_cpu(void) { return __mrst_cpu_chip; } +#else /* !CONFIG_X86_INTEL_MID */ + +#define mrst_identify_cpu() (0) + +#endif /* !CONFIG_X86_INTEL_MID */ + enum mrst_timer_options { MRST_TIMER_DEFAULT, MRST_TIMER_APBT_ONLY, @@ -58,7 +67,7 @@ extern struct console early_mrst_console; extern void mrst_early_console_init(void); extern struct console early_hsu_console; -extern void hsu_early_console_init(void); +extern void hsu_early_console_init(const char *); extern void intel_scu_devices_create(void); extern void intel_scu_devices_destroy(void); diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h index 084ef95274cd..95203d40ffdd 100644 --- a/arch/x86/include/asm/msr.h +++ b/arch/x86/include/asm/msr.h @@ -169,7 +169,14 @@ static inline int wrmsr_safe(unsigned msr, unsigned low, unsigned high) return native_write_msr_safe(msr, low, high); } -/* rdmsr with exception handling */ +/* + * rdmsr with exception handling. + * + * Please note that the exception handling works only after we've + * switched to the "smart" #GP handler in trap_init() which knows about + * exception tables - using this macro earlier than that causes machine + * hangs on boxes which do not implement the @msr in the first argument. + */ #define rdmsr_safe(msr, p1, p2) \ ({ \ int __err; \ diff --git a/arch/x86/include/asm/numachip/numachip_csr.h b/arch/x86/include/asm/numachip/numachip_csr.h new file mode 100644 index 000000000000..660f843df928 --- /dev/null +++ b/arch/x86/include/asm/numachip/numachip_csr.h @@ -0,0 +1,167 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Numascale NumaConnect-Specific Header file + * + * Copyright (C) 2011 Numascale AS. All rights reserved. + * + * Send feedback to <support@numascale.com> + * + */ + +#ifndef _ASM_X86_NUMACHIP_NUMACHIP_CSR_H +#define _ASM_X86_NUMACHIP_NUMACHIP_CSR_H + +#include <linux/numa.h> +#include <linux/percpu.h> +#include <linux/io.h> +#include <linux/swab.h> +#include <asm/types.h> +#include <asm/processor.h> + +#define CSR_NODE_SHIFT 16 +#define CSR_NODE_BITS(p) (((unsigned long)(p)) << CSR_NODE_SHIFT) +#define CSR_NODE_MASK 0x0fff /* 4K nodes */ + +/* 32K CSR space, b15 indicates geo/non-geo */ +#define CSR_OFFSET_MASK 0x7fffUL + +/* Global CSR space covers all 4K possible nodes with 64K CSR space per node */ +#define NUMACHIP_GCSR_BASE 0x3fff00000000ULL +#define NUMACHIP_GCSR_LIM 0x3fff0fffffffULL +#define NUMACHIP_GCSR_SIZE (NUMACHIP_GCSR_LIM - NUMACHIP_GCSR_BASE + 1) + +/* + * Local CSR space starts in global CSR space with "nodeid" = 0xfff0, however + * when using the direct mapping on x86_64, both start and size needs to be + * aligned with PMD_SIZE which is 2M + */ +#define NUMACHIP_LCSR_BASE 0x3ffffe000000ULL +#define NUMACHIP_LCSR_LIM 0x3fffffffffffULL +#define NUMACHIP_LCSR_SIZE (NUMACHIP_LCSR_LIM - NUMACHIP_LCSR_BASE + 1) + +static inline void *gcsr_address(int node, unsigned long offset) +{ + return __va(NUMACHIP_GCSR_BASE | (1UL << 15) | + CSR_NODE_BITS(node & CSR_NODE_MASK) | (offset & CSR_OFFSET_MASK)); +} + +static inline void *lcsr_address(unsigned long offset) +{ + return __va(NUMACHIP_LCSR_BASE | (1UL << 15) | + CSR_NODE_BITS(0xfff0) | (offset & CSR_OFFSET_MASK)); +} + +static inline unsigned int read_gcsr(int node, unsigned long offset) +{ + return swab32(readl(gcsr_address(node, offset))); +} + +static inline void write_gcsr(int node, unsigned long offset, unsigned int val) +{ + writel(swab32(val), gcsr_address(node, offset)); +} + +static inline unsigned int read_lcsr(unsigned long offset) +{ + return swab32(readl(lcsr_address(offset))); +} + +static inline void write_lcsr(unsigned long offset, unsigned int val) +{ + writel(swab32(val), lcsr_address(offset)); +} + +/* ========================================================================= */ +/* CSR_G0_STATE_CLEAR */ +/* ========================================================================= */ + +#define CSR_G0_STATE_CLEAR (0x000 + (0 << 12)) +union numachip_csr_g0_state_clear { + unsigned int v; + struct numachip_csr_g0_state_clear_s { + unsigned int _state:2; + unsigned int _rsvd_2_6:5; + unsigned int _lost:1; + unsigned int _rsvd_8_31:24; + } s; +}; + +/* ========================================================================= */ +/* CSR_G0_NODE_IDS */ +/* ========================================================================= */ + +#define CSR_G0_NODE_IDS (0x008 + (0 << 12)) +union numachip_csr_g0_node_ids { + unsigned int v; + struct numachip_csr_g0_node_ids_s { + unsigned int _initialid:16; + unsigned int _nodeid:12; + unsigned int _rsvd_28_31:4; + } s; +}; + +/* ========================================================================= */ +/* CSR_G3_EXT_IRQ_GEN */ +/* ========================================================================= */ + +#define CSR_G3_EXT_IRQ_GEN (0x030 + (3 << 12)) +union numachip_csr_g3_ext_irq_gen { + unsigned int v; + struct numachip_csr_g3_ext_irq_gen_s { + unsigned int _vector:8; + unsigned int _msgtype:3; + unsigned int _index:5; + unsigned int _destination_apic_id:16; + } s; +}; + +/* ========================================================================= */ +/* CSR_G3_EXT_IRQ_STATUS */ +/* ========================================================================= */ + +#define CSR_G3_EXT_IRQ_STATUS (0x034 + (3 << 12)) +union numachip_csr_g3_ext_irq_status { + unsigned int v; + struct numachip_csr_g3_ext_irq_status_s { + unsigned int _result:32; + } s; +}; + +/* ========================================================================= */ +/* CSR_G3_EXT_IRQ_DEST */ +/* ========================================================================= */ + +#define CSR_G3_EXT_IRQ_DEST (0x038 + (3 << 12)) +union numachip_csr_g3_ext_irq_dest { + unsigned int v; + struct numachip_csr_g3_ext_irq_dest_s { + unsigned int _irq:8; + unsigned int _rsvd_8_31:24; + } s; +}; + +/* ========================================================================= */ +/* CSR_G3_NC_ATT_MAP_SELECT */ +/* ========================================================================= */ + +#define CSR_G3_NC_ATT_MAP_SELECT (0x7fc + (3 << 12)) +union numachip_csr_g3_nc_att_map_select { + unsigned int v; + struct numachip_csr_g3_nc_att_map_select_s { + unsigned int _upper_address_bits:4; + unsigned int _select_ram:4; + unsigned int _rsvd_8_31:24; + } s; +}; + +/* ========================================================================= */ +/* CSR_G3_NC_ATT_MAP_SELECT_0-255 */ +/* ========================================================================= */ + +#define CSR_G3_NC_ATT_MAP_SELECT_0 (0x800 + (3 << 12)) + +#endif /* _ASM_X86_NUMACHIP_NUMACHIP_CSR_H */ + diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index d498943b906c..df75d07571ce 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -112,19 +112,28 @@ static inline void x86_teardown_msi_irq(unsigned int irq) { x86_msi.teardown_msi_irq(irq); } +static inline void x86_restore_msi_irqs(struct pci_dev *dev, int irq) +{ + x86_msi.restore_msi_irqs(dev, irq); +} #define arch_setup_msi_irqs x86_setup_msi_irqs #define arch_teardown_msi_irqs x86_teardown_msi_irqs #define arch_teardown_msi_irq x86_teardown_msi_irq +#define arch_restore_msi_irqs x86_restore_msi_irqs /* implemented in arch/x86/kernel/apic/io_apic. */ int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type); void native_teardown_msi_irq(unsigned int irq); +void native_restore_msi_irqs(struct pci_dev *dev, int irq); /* default to the implementation in drivers/lib/msi.c */ #define HAVE_DEFAULT_MSI_TEARDOWN_IRQS +#define HAVE_DEFAULT_MSI_RESTORE_IRQS void default_teardown_msi_irqs(struct pci_dev *dev); +void default_restore_msi_irqs(struct pci_dev *dev, int irq); #else #define native_setup_msi_irqs NULL #define native_teardown_msi_irq NULL #define default_teardown_msi_irqs NULL +#define default_restore_msi_irqs NULL #endif #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys) diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h index e38197806853..b3a531746026 100644 --- a/arch/x86/include/asm/pci_x86.h +++ b/arch/x86/include/asm/pci_x86.h @@ -44,8 +44,6 @@ enum pci_bf_sort_state { /* pci-i386.c */ -extern unsigned int pcibios_max_latency; - void pcibios_resource_survey(void); void pcibios_set_cache_line_size(void); diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 3470c9d0ebba..7a11910a63c4 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -414,22 +414,6 @@ do { \ #define this_cpu_xchg_2(pcp, nval) percpu_xchg_op(pcp, nval) #define this_cpu_xchg_4(pcp, nval) percpu_xchg_op(pcp, nval) -#define irqsafe_cpu_add_1(pcp, val) percpu_add_op((pcp), val) -#define irqsafe_cpu_add_2(pcp, val) percpu_add_op((pcp), val) -#define irqsafe_cpu_add_4(pcp, val) percpu_add_op((pcp), val) -#define irqsafe_cpu_and_1(pcp, val) percpu_to_op("and", (pcp), val) -#define irqsafe_cpu_and_2(pcp, val) percpu_to_op("and", (pcp), val) -#define irqsafe_cpu_and_4(pcp, val) percpu_to_op("and", (pcp), val) -#define irqsafe_cpu_or_1(pcp, val) percpu_to_op("or", (pcp), val) -#define irqsafe_cpu_or_2(pcp, val) percpu_to_op("or", (pcp), val) -#define irqsafe_cpu_or_4(pcp, val) percpu_to_op("or", (pcp), val) -#define irqsafe_cpu_xor_1(pcp, val) percpu_to_op("xor", (pcp), val) -#define irqsafe_cpu_xor_2(pcp, val) percpu_to_op("xor", (pcp), val) -#define irqsafe_cpu_xor_4(pcp, val) percpu_to_op("xor", (pcp), val) -#define irqsafe_cpu_xchg_1(pcp, nval) percpu_xchg_op(pcp, nval) -#define irqsafe_cpu_xchg_2(pcp, nval) percpu_xchg_op(pcp, nval) -#define irqsafe_cpu_xchg_4(pcp, nval) percpu_xchg_op(pcp, nval) - #ifndef CONFIG_M386 #define __this_cpu_add_return_1(pcp, val) percpu_add_return_op(pcp, val) #define __this_cpu_add_return_2(pcp, val) percpu_add_return_op(pcp, val) @@ -445,29 +429,22 @@ do { \ #define this_cpu_cmpxchg_2(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval) #define this_cpu_cmpxchg_4(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval) -#define irqsafe_cpu_cmpxchg_1(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval) -#define irqsafe_cpu_cmpxchg_2(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval) -#define irqsafe_cpu_cmpxchg_4(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval) #endif /* !CONFIG_M386 */ #ifdef CONFIG_X86_CMPXCHG64 -#define percpu_cmpxchg8b_double(pcp1, o1, o2, n1, n2) \ +#define percpu_cmpxchg8b_double(pcp1, pcp2, o1, o2, n1, n2) \ ({ \ - char __ret; \ - typeof(o1) __o1 = o1; \ - typeof(o1) __n1 = n1; \ - typeof(o2) __o2 = o2; \ - typeof(o2) __n2 = n2; \ - typeof(o2) __dummy = n2; \ + bool __ret; \ + typeof(pcp1) __o1 = (o1), __n1 = (n1); \ + typeof(pcp2) __o2 = (o2), __n2 = (n2); \ asm volatile("cmpxchg8b "__percpu_arg(1)"\n\tsetz %0\n\t" \ - : "=a"(__ret), "=m" (pcp1), "=d"(__dummy) \ - : "b"(__n1), "c"(__n2), "a"(__o1), "d"(__o2)); \ + : "=a" (__ret), "+m" (pcp1), "+m" (pcp2), "+d" (__o2) \ + : "b" (__n1), "c" (__n2), "a" (__o1)); \ __ret; \ }) -#define __this_cpu_cmpxchg_double_4(pcp1, pcp2, o1, o2, n1, n2) percpu_cmpxchg8b_double(pcp1, o1, o2, n1, n2) -#define this_cpu_cmpxchg_double_4(pcp1, pcp2, o1, o2, n1, n2) percpu_cmpxchg8b_double(pcp1, o1, o2, n1, n2) -#define irqsafe_cpu_cmpxchg_double_4(pcp1, pcp2, o1, o2, n1, n2) percpu_cmpxchg8b_double(pcp1, o1, o2, n1, n2) +#define __this_cpu_cmpxchg_double_4 percpu_cmpxchg8b_double +#define this_cpu_cmpxchg_double_4 percpu_cmpxchg8b_double #endif /* CONFIG_X86_CMPXCHG64 */ /* @@ -495,44 +472,28 @@ do { \ #define this_cpu_xchg_8(pcp, nval) percpu_xchg_op(pcp, nval) #define this_cpu_cmpxchg_8(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval) -#define irqsafe_cpu_add_8(pcp, val) percpu_add_op((pcp), val) -#define irqsafe_cpu_and_8(pcp, val) percpu_to_op("and", (pcp), val) -#define irqsafe_cpu_or_8(pcp, val) percpu_to_op("or", (pcp), val) -#define irqsafe_cpu_xor_8(pcp, val) percpu_to_op("xor", (pcp), val) -#define irqsafe_cpu_xchg_8(pcp, nval) percpu_xchg_op(pcp, nval) -#define irqsafe_cpu_cmpxchg_8(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval) - /* * Pretty complex macro to generate cmpxchg16 instruction. The instruction * is not supported on early AMD64 processors so we must be able to emulate * it in software. The address used in the cmpxchg16 instruction must be * aligned to a 16 byte boundary. */ -#ifdef CONFIG_SMP -#define CMPXCHG16B_EMU_CALL "call this_cpu_cmpxchg16b_emu\n\t" ASM_NOP3 -#else -#define CMPXCHG16B_EMU_CALL "call this_cpu_cmpxchg16b_emu\n\t" ASM_NOP2 -#endif -#define percpu_cmpxchg16b_double(pcp1, o1, o2, n1, n2) \ +#define percpu_cmpxchg16b_double(pcp1, pcp2, o1, o2, n1, n2) \ ({ \ - char __ret; \ - typeof(o1) __o1 = o1; \ - typeof(o1) __n1 = n1; \ - typeof(o2) __o2 = o2; \ - typeof(o2) __n2 = n2; \ - typeof(o2) __dummy; \ - alternative_io(CMPXCHG16B_EMU_CALL, \ - "cmpxchg16b " __percpu_prefix "(%%rsi)\n\tsetz %0\n\t", \ + bool __ret; \ + typeof(pcp1) __o1 = (o1), __n1 = (n1); \ + typeof(pcp2) __o2 = (o2), __n2 = (n2); \ + alternative_io("leaq %P1,%%rsi\n\tcall this_cpu_cmpxchg16b_emu\n\t", \ + "cmpxchg16b " __percpu_arg(1) "\n\tsetz %0\n\t", \ X86_FEATURE_CX16, \ - ASM_OUTPUT2("=a"(__ret), "=d"(__dummy)), \ - "S" (&pcp1), "b"(__n1), "c"(__n2), \ - "a"(__o1), "d"(__o2) : "memory"); \ + ASM_OUTPUT2("=a" (__ret), "+m" (pcp1), \ + "+m" (pcp2), "+d" (__o2)), \ + "b" (__n1), "c" (__n2), "a" (__o1) : "rsi"); \ __ret; \ }) -#define __this_cpu_cmpxchg_double_8(pcp1, pcp2, o1, o2, n1, n2) percpu_cmpxchg16b_double(pcp1, o1, o2, n1, n2) -#define this_cpu_cmpxchg_double_8(pcp1, pcp2, o1, o2, n1, n2) percpu_cmpxchg16b_double(pcp1, o1, o2, n1, n2) -#define irqsafe_cpu_cmpxchg_double_8(pcp1, pcp2, o1, o2, n1, n2) percpu_cmpxchg16b_double(pcp1, o1, o2, n1, n2) +#define __this_cpu_cmpxchg_double_8 percpu_cmpxchg16b_double +#define this_cpu_cmpxchg_double_8 percpu_cmpxchg16b_double #endif diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h index f61c62f7d5d8..096c975e099f 100644 --- a/arch/x86/include/asm/perf_event.h +++ b/arch/x86/include/asm/perf_event.h @@ -57,6 +57,7 @@ (1 << (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX)) #define ARCH_PERFMON_BRANCH_MISSES_RETIRED 6 +#define ARCH_PERFMON_EVENTS_COUNT 7 /* * Intel "Architectural Performance Monitoring" CPUID @@ -72,6 +73,19 @@ union cpuid10_eax { unsigned int full; }; +union cpuid10_ebx { + struct { + unsigned int no_unhalted_core_cycles:1; + unsigned int no_instructions_retired:1; + unsigned int no_unhalted_reference_cycles:1; + unsigned int no_llc_reference:1; + unsigned int no_llc_misses:1; + unsigned int no_branch_instruction_retired:1; + unsigned int no_branch_misses_retired:1; + } split; + unsigned int full; +}; + union cpuid10_edx { struct { unsigned int num_counters_fixed:5; @@ -81,6 +95,15 @@ union cpuid10_edx { unsigned int full; }; +struct x86_pmu_capability { + int version; + int num_counters_gp; + int num_counters_fixed; + int bit_width_gp; + int bit_width_fixed; + unsigned int events_mask; + int events_mask_len; +}; /* * Fixed-purpose performance events: @@ -89,23 +112,24 @@ union cpuid10_edx { /* * All 3 fixed-mode PMCs are configured via this single MSR: */ -#define MSR_ARCH_PERFMON_FIXED_CTR_CTRL 0x38d +#define MSR_ARCH_PERFMON_FIXED_CTR_CTRL 0x38d /* * The counts are available in three separate MSRs: */ /* Instr_Retired.Any: */ -#define MSR_ARCH_PERFMON_FIXED_CTR0 0x309 -#define X86_PMC_IDX_FIXED_INSTRUCTIONS (X86_PMC_IDX_FIXED + 0) +#define MSR_ARCH_PERFMON_FIXED_CTR0 0x309 +#define X86_PMC_IDX_FIXED_INSTRUCTIONS (X86_PMC_IDX_FIXED + 0) /* CPU_CLK_Unhalted.Core: */ -#define MSR_ARCH_PERFMON_FIXED_CTR1 0x30a -#define X86_PMC_IDX_FIXED_CPU_CYCLES (X86_PMC_IDX_FIXED + 1) +#define MSR_ARCH_PERFMON_FIXED_CTR1 0x30a +#define X86_PMC_IDX_FIXED_CPU_CYCLES (X86_PMC_IDX_FIXED + 1) /* CPU_CLK_Unhalted.Ref: */ -#define MSR_ARCH_PERFMON_FIXED_CTR2 0x30b -#define X86_PMC_IDX_FIXED_BUS_CYCLES (X86_PMC_IDX_FIXED + 2) +#define MSR_ARCH_PERFMON_FIXED_CTR2 0x30b +#define X86_PMC_IDX_FIXED_REF_CYCLES (X86_PMC_IDX_FIXED + 2) +#define X86_PMC_MSK_FIXED_REF_CYCLES (1ULL << X86_PMC_IDX_FIXED_REF_CYCLES) /* * We model BTS tracing as another fixed-mode PMC. @@ -202,6 +226,7 @@ struct perf_guest_switch_msr { }; extern struct perf_guest_switch_msr *perf_guest_get_msrs(int *nr); +extern void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap); #else static inline perf_guest_switch_msr *perf_guest_get_msrs(int *nr) { @@ -209,6 +234,11 @@ static inline perf_guest_switch_msr *perf_guest_get_msrs(int *nr) return NULL; } +static inline void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap) +{ + memset(cap, 0, sizeof(*cap)); +} + static inline void perf_events_lapic_init(void) { } #endif diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h index 18601c86fab1..49afb3f41eb6 100644 --- a/arch/x86/include/asm/pgtable.h +++ b/arch/x86/include/asm/pgtable.h @@ -703,7 +703,7 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, pte_update(mm, addr, ptep); } -#define flush_tlb_fix_spurious_fault(vma, address) +#define flush_tlb_fix_spurious_fault(vma, address) do { } while (0) #define mk_pmd(page, pgprot) pfn_pmd(page_to_pfn(page), (pgprot)) diff --git a/arch/x86/include/asm/processor-flags.h b/arch/x86/include/asm/processor-flags.h index 2dddb317bb39..f8ab3eaad128 100644 --- a/arch/x86/include/asm/processor-flags.h +++ b/arch/x86/include/asm/processor-flags.h @@ -6,6 +6,7 @@ * EFLAGS bits */ #define X86_EFLAGS_CF 0x00000001 /* Carry Flag */ +#define X86_EFLAGS_BIT1 0x00000002 /* Bit 1 - always on */ #define X86_EFLAGS_PF 0x00000004 /* Parity Flag */ #define X86_EFLAGS_AF 0x00000010 /* Auxiliary carry Flag */ #define X86_EFLAGS_ZF 0x00000040 /* Zero Flag */ diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index b650435ffb53..aa9088c26931 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -99,7 +99,6 @@ struct cpuinfo_x86 { u16 apicid; u16 initial_apicid; u16 x86_clflush_size; -#ifdef CONFIG_SMP /* number of cores as seen by the OS: */ u16 booted_cores; /* Physical processor id: */ @@ -110,7 +109,6 @@ struct cpuinfo_x86 { u8 compute_unit_id; /* Index into per_cpu list: */ u16 cpu_index; -#endif u32 microcode; } __attribute__((__aligned__(SMP_CACHE_BYTES))); diff --git a/arch/x86/include/asm/serpent.h b/arch/x86/include/asm/serpent.h new file mode 100644 index 000000000000..d3ef63fe0c81 --- /dev/null +++ b/arch/x86/include/asm/serpent.h @@ -0,0 +1,63 @@ +#ifndef ASM_X86_SERPENT_H +#define ASM_X86_SERPENT_H + +#include <linux/crypto.h> +#include <crypto/serpent.h> + +#ifdef CONFIG_X86_32 + +#define SERPENT_PARALLEL_BLOCKS 4 + +asmlinkage void __serpent_enc_blk_4way(struct serpent_ctx *ctx, u8 *dst, + const u8 *src, bool xor); +asmlinkage void serpent_dec_blk_4way(struct serpent_ctx *ctx, u8 *dst, + const u8 *src); + +static inline void serpent_enc_blk_xway(struct serpent_ctx *ctx, u8 *dst, + const u8 *src) +{ + __serpent_enc_blk_4way(ctx, dst, src, false); +} + +static inline void serpent_enc_blk_xway_xor(struct serpent_ctx *ctx, u8 *dst, + const u8 *src) +{ + __serpent_enc_blk_4way(ctx, dst, src, true); +} + +static inline void serpent_dec_blk_xway(struct serpent_ctx *ctx, u8 *dst, + const u8 *src) +{ + serpent_dec_blk_4way(ctx, dst, src); +} + +#else + +#define SERPENT_PARALLEL_BLOCKS 8 + +asmlinkage void __serpent_enc_blk_8way(struct serpent_ctx *ctx, u8 *dst, + const u8 *src, bool xor); +asmlinkage void serpent_dec_blk_8way(struct serpent_ctx *ctx, u8 *dst, + const u8 *src); + +static inline void serpent_enc_blk_xway(struct serpent_ctx *ctx, u8 *dst, + const u8 *src) +{ + __serpent_enc_blk_8way(ctx, dst, src, false); +} + +static inline void serpent_enc_blk_xway_xor(struct serpent_ctx *ctx, u8 *dst, + const u8 *src) +{ + __serpent_enc_blk_8way(ctx, dst, src, true); +} + +static inline void serpent_dec_blk_xway(struct serpent_ctx *ctx, u8 *dst, + const u8 *src) +{ + serpent_dec_blk_8way(ctx, dst, src); +} + +#endif + +#endif diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index 972c260919a3..a82c2bf504b6 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -79,23 +79,10 @@ static __always_inline int __ticket_spin_trylock(arch_spinlock_t *lock) return cmpxchg(&lock->head_tail, old.head_tail, new.head_tail) == old.head_tail; } -#if (NR_CPUS < 256) static __always_inline void __ticket_spin_unlock(arch_spinlock_t *lock) { - asm volatile(UNLOCK_LOCK_PREFIX "incb %0" - : "+m" (lock->head_tail) - : - : "memory", "cc"); + __add(&lock->tickets.head, 1, UNLOCK_LOCK_PREFIX); } -#else -static __always_inline void __ticket_spin_unlock(arch_spinlock_t *lock) -{ - asm volatile(UNLOCK_LOCK_PREFIX "incw %0" - : "+m" (lock->head_tail) - : - : "memory", "cc"); -} -#endif static inline int __ticket_spin_is_locked(arch_spinlock_t *lock) { diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h index c2ff2a1d845e..2d2f01ce6dcb 100644 --- a/arch/x86/include/asm/system.h +++ b/arch/x86/include/asm/system.h @@ -401,6 +401,7 @@ extern unsigned long arch_align_stack(unsigned long sp); extern void free_init_pages(char *what, unsigned long begin, unsigned long end); void default_idle(void); +bool set_pm_idle_to_default(void); void stop_this_cpu(void *dummy); diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h index a1fe5c127b52..74047159d0ab 100644 --- a/arch/x86/include/asm/thread_info.h +++ b/arch/x86/include/asm/thread_info.h @@ -40,7 +40,8 @@ struct thread_info { */ __u8 supervisor_stack[0]; #endif - int uaccess_err; + int sig_on_uaccess_error:1; + int uaccess_err:1; /* uaccess failed */ }; #define INIT_THREAD_INFO(tsk) \ @@ -90,7 +91,6 @@ struct thread_info { #define TIF_MEMDIE 20 /* is terminating due to OOM killer */ #define TIF_DEBUG 21 /* uses debug registers */ #define TIF_IO_BITMAP 22 /* uses I/O bitmap */ -#define TIF_FREEZE 23 /* is freezing for suspend */ #define TIF_FORCED_TF 24 /* true if TF in eflags artificially */ #define TIF_BLOCKSTEP 25 /* set when we want DEBUGCTLMSR_BTF */ #define TIF_LAZY_MMU_UPDATES 27 /* task is updating the mmu lazily */ @@ -112,7 +112,6 @@ struct thread_info { #define _TIF_FORK (1 << TIF_FORK) #define _TIF_DEBUG (1 << TIF_DEBUG) #define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) -#define _TIF_FREEZE (1 << TIF_FREEZE) #define _TIF_FORCED_TF (1 << TIF_FORCED_TF) #define _TIF_BLOCKSTEP (1 << TIF_BLOCKSTEP) #define _TIF_LAZY_MMU_UPDATES (1 << TIF_LAZY_MMU_UPDATES) @@ -231,6 +230,12 @@ static inline struct thread_info *current_thread_info(void) movq PER_CPU_VAR(kernel_stack),reg ; \ subq $(THREAD_SIZE-KERNEL_STACK_OFFSET),reg +/* + * Same if PER_CPU_VAR(kernel_stack) is, perhaps with some offset, already in + * a certain register (to be used in assembler memory operands). + */ +#define THREAD_INFO(reg, off) KERNEL_STACK_OFFSET+(off)-THREAD_SIZE(reg) + #endif #endif /* !X86_32 */ diff --git a/arch/x86/include/asm/timer.h b/arch/x86/include/asm/timer.h index fa7b9176b76c..431793e5d484 100644 --- a/arch/x86/include/asm/timer.h +++ b/arch/x86/include/asm/timer.h @@ -32,6 +32,22 @@ extern int no_timer_check; * (mathieu.desnoyers@polymtl.ca) * * -johnstul@us.ibm.com "math is hard, lets go shopping!" + * + * In: + * + * ns = cycles * cyc2ns_scale / SC + * + * Although we may still have enough bits to store the value of ns, + * in some cases, we may not have enough bits to store cycles * cyc2ns_scale, + * leading to an incorrect result. + * + * To avoid this, we can decompose 'cycles' into quotient and remainder + * of division by SC. Then, + * + * ns = (quot * SC + rem) * cyc2ns_scale / SC + * = quot * cyc2ns_scale + (rem * cyc2ns_scale) / SC + * + * - sqazi@google.com */ DECLARE_PER_CPU(unsigned long, cyc2ns); @@ -41,9 +57,14 @@ DECLARE_PER_CPU(unsigned long long, cyc2ns_offset); static inline unsigned long long __cycles_2_ns(unsigned long long cyc) { + unsigned long long quot; + unsigned long long rem; int cpu = smp_processor_id(); unsigned long long ns = per_cpu(cyc2ns_offset, cpu); - ns += cyc * per_cpu(cyc2ns, cpu) >> CYC2NS_SCALE_FACTOR; + quot = (cyc >> CYC2NS_SCALE_FACTOR); + rem = cyc & ((1ULL << CYC2NS_SCALE_FACTOR) - 1); + ns += quot * per_cpu(cyc2ns, cpu) + + ((rem * per_cpu(cyc2ns, cpu)) >> CYC2NS_SCALE_FACTOR); return ns; } diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index c00692476e9f..b9676ae37ada 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -130,10 +130,8 @@ extern void setup_node_to_cpumask_map(void); .balance_interval = 1, \ } -#ifdef CONFIG_X86_64 extern int __node_distance(int, int); #define node_distance(a, b) __node_distance(a, b) -#endif #else /* !CONFIG_NUMA */ @@ -174,7 +172,7 @@ static inline void arch_fix_phys_package_id(int num, u32 slot) } struct pci_bus; -void x86_pci_root_bus_res_quirks(struct pci_bus *b); +void x86_pci_root_bus_resources(int bus, struct list_head *resources); #ifdef CONFIG_SMP #define mc_capable() ((boot_cpu_data.x86_max_cores > 1) && \ diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h index 83e2efd181e2..15d99153a96d 100644 --- a/arch/x86/include/asm/tsc.h +++ b/arch/x86/include/asm/tsc.h @@ -51,6 +51,8 @@ extern int unsynchronized_tsc(void); extern int check_tsc_unstable(void); extern unsigned long native_calibrate_tsc(void); +extern int tsc_clocksource_reliable; + /* * Boot-time check whether the TSCs are synchronized across * all CPUs/cores: diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h index 36361bf6fdd1..8be5f54d9360 100644 --- a/arch/x86/include/asm/uaccess.h +++ b/arch/x86/include/asm/uaccess.h @@ -462,7 +462,7 @@ struct __large_struct { unsigned long buf[100]; }; barrier(); #define uaccess_catch(err) \ - (err) |= current_thread_info()->uaccess_err; \ + (err) |= (current_thread_info()->uaccess_err ? -EFAULT : 0); \ current_thread_info()->uaccess_err = prev_err; \ } while (0) diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h index 10474fb1185d..cf1d73643f60 100644 --- a/arch/x86/include/asm/uv/uv_mmrs.h +++ b/arch/x86/include/asm/uv/uv_mmrs.h @@ -57,6 +57,7 @@ #define UV1_HUB_PART_NUMBER 0x88a5 #define UV2_HUB_PART_NUMBER 0x8eb8 +#define UV2_HUB_PART_NUMBER_X 0x1111 /* Compat: if this #define is present, UV headers support UV2 */ #define UV2_HUB_IS_SUPPORTED 1 diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h index 1971e652d24b..517d4767ffdd 100644 --- a/arch/x86/include/asm/x86_init.h +++ b/arch/x86/include/asm/x86_init.h @@ -7,6 +7,7 @@ struct mpc_bus; struct mpc_cpu; struct mpc_table; +struct cpuinfo_x86; /** * struct x86_init_mpparse - platform specific mpparse ops @@ -147,6 +148,7 @@ struct x86_init_ops { */ struct x86_cpuinit_ops { void (*setup_percpu_clockev)(void); + void (*fixup_cpu_id)(struct cpuinfo_x86 *c, int node); }; /** @@ -177,6 +179,7 @@ struct x86_msi_ops { int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type); void (*teardown_msi_irq)(unsigned int irq); void (*teardown_msi_irqs)(struct pci_dev *dev); + void (*restore_msi_irqs)(struct pci_dev *dev, int irq); }; extern struct x86_init_ops x86_init; @@ -186,5 +189,6 @@ extern struct x86_msi_ops x86_msi; extern void x86_init_noop(void); extern void x86_init_uint_noop(unsigned int unused); +extern void x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node); #endif diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 4558f0d0822d..ce664f33ea8e 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -219,6 +219,8 @@ static int __init acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end) { struct acpi_madt_local_x2apic *processor = NULL; + int apic_id; + u8 enabled; processor = (struct acpi_madt_local_x2apic *)header; @@ -227,6 +229,8 @@ acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end) acpi_table_print_madt_entry(header); + apic_id = processor->local_apic_id; + enabled = processor->lapic_flags & ACPI_MADT_ENABLED; #ifdef CONFIG_X86_X2APIC /* * We need to register disabled CPU as well to permit @@ -235,8 +239,10 @@ acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end) * to not preallocating memory for all NR_CPUS * when we use CPU hotplug. */ - acpi_register_lapic(processor->local_apic_id, /* APIC ID */ - processor->lapic_flags & ACPI_MADT_ENABLED); + if (!cpu_has_x2apic && (apic_id >= 0xff) && enabled) + printk(KERN_WARNING PREFIX "x2apic entry ignored\n"); + else + acpi_register_lapic(apic_id, enabled); #else printk(KERN_WARNING PREFIX "x2apic entry ignored\n"); #endif diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c index 4c39baa8facc..be16854591cc 100644 --- a/arch/x86/kernel/amd_nb.c +++ b/arch/x86/kernel/amd_nb.c @@ -119,20 +119,49 @@ bool __init early_is_amd_nb(u32 device) return false; } +struct resource *amd_get_mmconfig_range(struct resource *res) +{ + u32 address; + u64 base, msr; + unsigned segn_busn_bits; + + if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) + return NULL; + + /* assume all cpus from fam10h have mmconfig */ + if (boot_cpu_data.x86 < 0x10) + return NULL; + + address = MSR_FAM10H_MMIO_CONF_BASE; + rdmsrl(address, msr); + + /* mmconfig is not enabled */ + if (!(msr & FAM10H_MMIO_CONF_ENABLE)) + return NULL; + + base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT); + + segn_busn_bits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) & + FAM10H_MMIO_CONF_BUSRANGE_MASK; + + res->flags = IORESOURCE_MEM; + res->start = base; + res->end = base + (1ULL<<(segn_busn_bits + 20)) - 1; + return res; +} + int amd_get_subcaches(int cpu) { struct pci_dev *link = node_to_amd_nb(amd_get_nb_id(cpu))->link; unsigned int mask; - int cuid = 0; + int cuid; if (!amd_nb_has_feature(AMD_NB_L3_PARTITIONING)) return 0; pci_read_config_dword(link, 0x1d4, &mask); -#ifdef CONFIG_SMP cuid = cpu_data(cpu).compute_unit_id; -#endif return (mask >> (4 * cuid)) & 0xf; } @@ -141,7 +170,7 @@ int amd_set_subcaches(int cpu, int mask) static unsigned int reset, ban; struct amd_northbridge *nb = node_to_amd_nb(amd_get_nb_id(cpu)); unsigned int reg; - int cuid = 0; + int cuid; if (!amd_nb_has_feature(AMD_NB_L3_PARTITIONING) || mask > 0xf) return -EINVAL; @@ -159,9 +188,7 @@ int amd_set_subcaches(int cpu, int mask) pci_write_config_dword(nb->misc, 0x1b8, reg & ~0x180000); } -#ifdef CONFIG_SMP cuid = cpu_data(cpu).compute_unit_id; -#endif mask <<= 4 * cuid; mask |= (0xf ^ (1 << cuid)) << 26; diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 3d2661ca6542..6e76c191a835 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -88,13 +88,13 @@ static u32 __init allocate_aperture(void) */ addr = memblock_find_in_range(GART_MIN_ADDR, GART_MAX_ADDR, aper_size, aper_size); - if (addr == MEMBLOCK_ERROR || addr + aper_size > GART_MAX_ADDR) { + if (!addr || addr + aper_size > GART_MAX_ADDR) { printk(KERN_ERR "Cannot allocate aperture memory hole (%lx,%uK)\n", addr, aper_size>>10); return 0; } - memblock_x86_reserve_range(addr, addr + aper_size, "aperture64"); + memblock_reserve(addr, aper_size); /* * Kmemleak should not scan this block as it may not be mapped via the * kernel direct mapping. diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile index 767fd04f2843..0ae0323b1f9c 100644 --- a/arch/x86/kernel/apic/Makefile +++ b/arch/x86/kernel/apic/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_SMP) += ipi.o ifeq ($(CONFIG_X86_64),y) # APIC probe will depend on the listing order here +obj-$(CONFIG_X86_NUMACHIP) += apic_numachip.o obj-$(CONFIG_X86_UV) += x2apic_uv_x.o obj-$(CONFIG_X86_X2APIC) += x2apic_phys.o obj-$(CONFIG_X86_X2APIC) += x2apic_cluster.o diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index f98d84caf94c..2eec05b6d1b8 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -146,16 +146,26 @@ __setup("apicpmtimer", setup_apicpmtimer); int x2apic_mode; #ifdef CONFIG_X86_X2APIC /* x2apic enabled before OS handover */ -static int x2apic_preenabled; +int x2apic_preenabled; +static int x2apic_disabled; +static int nox2apic; static __init int setup_nox2apic(char *str) { if (x2apic_enabled()) { - pr_warning("Bios already enabled x2apic, " - "can't enforce nox2apic"); - return 0; - } + int apicid = native_apic_msr_read(APIC_ID); + + if (apicid >= 255) { + pr_warning("Apicid: %08x, cannot enforce nox2apic\n", + apicid); + return 0; + } + + pr_warning("x2apic already enabled. will disable it\n"); + } else + setup_clear_cpu_cap(X86_FEATURE_X2APIC); + + nox2apic = 1; - setup_clear_cpu_cap(X86_FEATURE_X2APIC); return 0; } early_param("nox2apic", setup_nox2apic); @@ -250,6 +260,7 @@ u32 native_safe_apic_wait_icr_idle(void) send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY; if (!send_status) break; + inc_irq_stat(icr_read_retry_count); udelay(100); } while (timeout++ < 1000); @@ -876,8 +887,8 @@ void __irq_entry smp_apic_timer_interrupt(struct pt_regs *regs) * Besides, if we don't timer interrupts ignore the global * interrupt lock, which is the WrongThing (tm) to do. */ - exit_idle(); irq_enter(); + exit_idle(); local_apic_timer_interrupt(); irq_exit(); @@ -1431,6 +1442,45 @@ void __init bsp_end_local_APIC_setup(void) } #ifdef CONFIG_X86_X2APIC +/* + * Need to disable xapic and x2apic at the same time and then enable xapic mode + */ +static inline void __disable_x2apic(u64 msr) +{ + wrmsrl(MSR_IA32_APICBASE, + msr & ~(X2APIC_ENABLE | XAPIC_ENABLE)); + wrmsrl(MSR_IA32_APICBASE, msr & ~X2APIC_ENABLE); +} + +static __init void disable_x2apic(void) +{ + u64 msr; + + if (!cpu_has_x2apic) + return; + + rdmsrl(MSR_IA32_APICBASE, msr); + if (msr & X2APIC_ENABLE) { + u32 x2apic_id = read_apic_id(); + + if (x2apic_id >= 255) + panic("Cannot disable x2apic, id: %08x\n", x2apic_id); + + pr_info("Disabling x2apic\n"); + __disable_x2apic(msr); + + if (nox2apic) { + clear_cpu_cap(&cpu_data(0), X86_FEATURE_X2APIC); + setup_clear_cpu_cap(X86_FEATURE_X2APIC); + } + + x2apic_disabled = 1; + x2apic_mode = 0; + + register_lapic_address(mp_lapic_addr); + } +} + void check_x2apic(void) { if (x2apic_enabled()) { @@ -1441,15 +1491,20 @@ void check_x2apic(void) void enable_x2apic(void) { - int msr, msr2; + u64 msr; + + rdmsrl(MSR_IA32_APICBASE, msr); + if (x2apic_disabled) { + __disable_x2apic(msr); + return; + } if (!x2apic_mode) return; - rdmsr(MSR_IA32_APICBASE, msr, msr2); if (!(msr & X2APIC_ENABLE)) { printk_once(KERN_INFO "Enabling x2apic\n"); - wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, msr2); + wrmsrl(MSR_IA32_APICBASE, msr | X2APIC_ENABLE); } } #endif /* CONFIG_X86_X2APIC */ @@ -1486,25 +1541,34 @@ void __init enable_IR_x2apic(void) ret = save_ioapic_entries(); if (ret) { pr_info("Saving IO-APIC state failed: %d\n", ret); - goto out; + return; } local_irq_save(flags); legacy_pic->mask_all(); mask_ioapic_entries(); + if (x2apic_preenabled && nox2apic) + disable_x2apic(); + if (dmar_table_init_ret) ret = -1; else ret = enable_IR(); + if (!x2apic_supported()) + goto skip_x2apic; + if (ret < 0) { /* IR is required if there is APIC ID > 255 even when running * under KVM */ if (max_physical_apicid > 255 || - !hypervisor_x2apic_available()) - goto nox2apic; + !hypervisor_x2apic_available()) { + if (x2apic_preenabled) + disable_x2apic(); + goto skip_x2apic; + } /* * without IR all CPUs can be addressed by IOAPIC/MSI * only in physical mode @@ -1512,8 +1576,10 @@ void __init enable_IR_x2apic(void) x2apic_force_phys(); } - if (ret == IRQ_REMAP_XAPIC_MODE) - goto nox2apic; + if (ret == IRQ_REMAP_XAPIC_MODE) { + pr_info("x2apic not enabled, IRQ remapping is in xapic mode\n"); + goto skip_x2apic; + } x2apic_enabled = 1; @@ -1523,22 +1589,11 @@ void __init enable_IR_x2apic(void) pr_info("Enabled x2apic\n"); } -nox2apic: +skip_x2apic: if (ret < 0) /* IR enabling failed */ restore_ioapic_entries(); legacy_pic->restore_mask(); local_irq_restore(flags); - -out: - if (x2apic_enabled || !x2apic_supported()) - return; - - if (x2apic_preenabled) - panic("x2apic: enabled by BIOS but kernel init failed."); - else if (ret == IRQ_REMAP_XAPIC_MODE) - pr_info("x2apic not enabled, IRQ remapping is in xapic mode\n"); - else if (ret < 0) - pr_info("x2apic not enabled, IRQ remapping init failed\n"); } #ifdef CONFIG_X86_64 @@ -1809,8 +1864,8 @@ void smp_spurious_interrupt(struct pt_regs *regs) { u32 v; - exit_idle(); irq_enter(); + exit_idle(); /* * Check if this really is a spurious interrupt and ACK it * if it is a vectored one. Just in case... @@ -1846,8 +1901,8 @@ void smp_error_interrupt(struct pt_regs *regs) "Illegal register address", /* APIC Error Bit 7 */ }; - exit_idle(); irq_enter(); + exit_idle(); /* First tickle the hardware, only then report what went on. -- REW */ v0 = apic_read(APIC_ESR); apic_write(APIC_ESR, 0); diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c index f7a41e4cae47..8c3cdded6f2b 100644 --- a/arch/x86/kernel/apic/apic_flat_64.c +++ b/arch/x86/kernel/apic/apic_flat_64.c @@ -62,7 +62,7 @@ static void flat_vector_allocation_domain(int cpu, struct cpumask *retmask) * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel * document number 292116). So here it goes... */ -static void flat_init_apic_ldr(void) +void flat_init_apic_ldr(void) { unsigned long val; unsigned long num, id; @@ -171,9 +171,14 @@ static int flat_phys_pkg_id(int initial_apic_id, int index_msb) return initial_apic_id >> index_msb; } +static int flat_probe(void) +{ + return 1; +} + static struct apic apic_flat = { .name = "flat", - .probe = NULL, + .probe = flat_probe, .acpi_madt_oem_check = flat_acpi_madt_oem_check, .apic_id_registered = flat_apic_id_registered, diff --git a/arch/x86/kernel/apic/apic_numachip.c b/arch/x86/kernel/apic/apic_numachip.c new file mode 100644 index 000000000000..09d3d8c1cd99 --- /dev/null +++ b/arch/x86/kernel/apic/apic_numachip.c @@ -0,0 +1,294 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Numascale NumaConnect-Specific APIC Code + * + * Copyright (C) 2011 Numascale AS. All rights reserved. + * + * Send feedback to <support@numascale.com> + * + */ + +#include <linux/errno.h> +#include <linux/threads.h> +#include <linux/cpumask.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/ctype.h> +#include <linux/init.h> +#include <linux/hardirq.h> +#include <linux/delay.h> + +#include <asm/numachip/numachip_csr.h> +#include <asm/smp.h> +#include <asm/apic.h> +#include <asm/ipi.h> +#include <asm/apic_flat_64.h> + +static int numachip_system __read_mostly; + +static struct apic apic_numachip __read_mostly; + +static unsigned int get_apic_id(unsigned long x) +{ + unsigned long value; + unsigned int id; + + rdmsrl(MSR_FAM10H_NODE_ID, value); + id = ((x >> 24) & 0xffU) | ((value << 2) & 0x3f00U); + + return id; +} + +static unsigned long set_apic_id(unsigned int id) +{ + unsigned long x; + + x = ((id & 0xffU) << 24); + return x; +} + +static unsigned int read_xapic_id(void) +{ + return get_apic_id(apic_read(APIC_ID)); +} + +static int numachip_apic_id_registered(void) +{ + return physid_isset(read_xapic_id(), phys_cpu_present_map); +} + +static int numachip_phys_pkg_id(int initial_apic_id, int index_msb) +{ + return initial_apic_id >> index_msb; +} + +static const struct cpumask *numachip_target_cpus(void) +{ + return cpu_online_mask; +} + +static void numachip_vector_allocation_domain(int cpu, struct cpumask *retmask) +{ + cpumask_clear(retmask); + cpumask_set_cpu(cpu, retmask); +} + +static int __cpuinit numachip_wakeup_secondary(int phys_apicid, unsigned long start_rip) +{ + union numachip_csr_g3_ext_irq_gen int_gen; + + int_gen.s._destination_apic_id = phys_apicid; + int_gen.s._vector = 0; + int_gen.s._msgtype = APIC_DM_INIT >> 8; + int_gen.s._index = 0; + + write_lcsr(CSR_G3_EXT_IRQ_GEN, int_gen.v); + + int_gen.s._msgtype = APIC_DM_STARTUP >> 8; + int_gen.s._vector = start_rip >> 12; + + write_lcsr(CSR_G3_EXT_IRQ_GEN, int_gen.v); + + atomic_set(&init_deasserted, 1); + return 0; +} + +static void numachip_send_IPI_one(int cpu, int vector) +{ + union numachip_csr_g3_ext_irq_gen int_gen; + int apicid = per_cpu(x86_cpu_to_apicid, cpu); + + int_gen.s._destination_apic_id = apicid; + int_gen.s._vector = vector; + int_gen.s._msgtype = (vector == NMI_VECTOR ? APIC_DM_NMI : APIC_DM_FIXED) >> 8; + int_gen.s._index = 0; + + write_lcsr(CSR_G3_EXT_IRQ_GEN, int_gen.v); +} + +static void numachip_send_IPI_mask(const struct cpumask *mask, int vector) +{ + unsigned int cpu; + + for_each_cpu(cpu, mask) + numachip_send_IPI_one(cpu, vector); +} + +static void numachip_send_IPI_mask_allbutself(const struct cpumask *mask, + int vector) +{ + unsigned int this_cpu = smp_processor_id(); + unsigned int cpu; + + for_each_cpu(cpu, mask) { + if (cpu != this_cpu) + numachip_send_IPI_one(cpu, vector); + } +} + +static void numachip_send_IPI_allbutself(int vector) +{ + unsigned int this_cpu = smp_processor_id(); + unsigned int cpu; + + for_each_online_cpu(cpu) { + if (cpu != this_cpu) + numachip_send_IPI_one(cpu, vector); + } +} + +static void numachip_send_IPI_all(int vector) +{ + numachip_send_IPI_mask(cpu_online_mask, vector); +} + +static void numachip_send_IPI_self(int vector) +{ + __default_send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL); +} + +static unsigned int numachip_cpu_mask_to_apicid(const struct cpumask *cpumask) +{ + int cpu; + + /* + * We're using fixed IRQ delivery, can only return one phys APIC ID. + * May as well be the first. + */ + cpu = cpumask_first(cpumask); + if (likely((unsigned)cpu < nr_cpu_ids)) + return per_cpu(x86_cpu_to_apicid, cpu); + + return BAD_APICID; +} + +static unsigned int +numachip_cpu_mask_to_apicid_and(const struct cpumask *cpumask, + const struct cpumask *andmask) +{ + int cpu; + + /* + * We're using fixed IRQ delivery, can only return one phys APIC ID. + * May as well be the first. + */ + for_each_cpu_and(cpu, cpumask, andmask) { + if (cpumask_test_cpu(cpu, cpu_online_mask)) + break; + } + return per_cpu(x86_cpu_to_apicid, cpu); +} + +static int __init numachip_probe(void) +{ + return apic == &apic_numachip; +} + +static void __init map_csrs(void) +{ + printk(KERN_INFO "NumaChip: Mapping local CSR space (%016llx - %016llx)\n", + NUMACHIP_LCSR_BASE, NUMACHIP_LCSR_BASE + NUMACHIP_LCSR_SIZE - 1); + init_extra_mapping_uc(NUMACHIP_LCSR_BASE, NUMACHIP_LCSR_SIZE); + + printk(KERN_INFO "NumaChip: Mapping global CSR space (%016llx - %016llx)\n", + NUMACHIP_GCSR_BASE, NUMACHIP_GCSR_BASE + NUMACHIP_GCSR_SIZE - 1); + init_extra_mapping_uc(NUMACHIP_GCSR_BASE, NUMACHIP_GCSR_SIZE); +} + +static void fixup_cpu_id(struct cpuinfo_x86 *c, int node) +{ + c->phys_proc_id = node; + per_cpu(cpu_llc_id, smp_processor_id()) = node; +} + +static int __init numachip_system_init(void) +{ + unsigned int val; + + if (!numachip_system) + return 0; + + x86_cpuinit.fixup_cpu_id = fixup_cpu_id; + + map_csrs(); + + val = read_lcsr(CSR_G0_NODE_IDS); + printk(KERN_INFO "NumaChip: Local NodeID = %08x\n", val); + + return 0; +} +early_initcall(numachip_system_init); + +static int numachip_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + if (!strncmp(oem_id, "NUMASC", 6)) { + numachip_system = 1; + return 1; + } + + return 0; +} + +static struct apic apic_numachip __refconst = { + + .name = "NumaConnect system", + .probe = numachip_probe, + .acpi_madt_oem_check = numachip_acpi_madt_oem_check, + .apic_id_registered = numachip_apic_id_registered, + + .irq_delivery_mode = dest_Fixed, + .irq_dest_mode = 0, /* physical */ + + .target_cpus = numachip_target_cpus, + .disable_esr = 0, + .dest_logical = 0, + .check_apicid_used = NULL, + .check_apicid_present = NULL, + + .vector_allocation_domain = numachip_vector_allocation_domain, + .init_apic_ldr = flat_init_apic_ldr, + + .ioapic_phys_id_map = NULL, + .setup_apic_routing = NULL, + .multi_timer_check = NULL, + .cpu_present_to_apicid = default_cpu_present_to_apicid, + .apicid_to_cpu_present = NULL, + .setup_portio_remap = NULL, + .check_phys_apicid_present = default_check_phys_apicid_present, + .enable_apic_mode = NULL, + .phys_pkg_id = numachip_phys_pkg_id, + .mps_oem_check = NULL, + + .get_apic_id = get_apic_id, + .set_apic_id = set_apic_id, + .apic_id_mask = 0xffU << 24, + + .cpu_mask_to_apicid = numachip_cpu_mask_to_apicid, + .cpu_mask_to_apicid_and = numachip_cpu_mask_to_apicid_and, + + .send_IPI_mask = numachip_send_IPI_mask, + .send_IPI_mask_allbutself = numachip_send_IPI_mask_allbutself, + .send_IPI_allbutself = numachip_send_IPI_allbutself, + .send_IPI_all = numachip_send_IPI_all, + .send_IPI_self = numachip_send_IPI_self, + + .wakeup_secondary_cpu = numachip_wakeup_secondary, + .trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW, + .trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH, + .wait_for_init_deassert = NULL, + .smp_callin_clear_local_apic = NULL, + .inquire_remote_apic = NULL, /* REMRD not supported */ + + .read = native_apic_mem_read, + .write = native_apic_mem_write, + .icr_read = native_apic_icr_read, + .icr_write = native_apic_icr_write, + .wait_icr_idle = native_apic_wait_icr_idle, + .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, +}; +apic_driver(apic_numachip); + diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 6d939d7847e2..fb072754bc1d 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2421,8 +2421,8 @@ asmlinkage void smp_irq_move_cleanup_interrupt(void) unsigned vector, me; ack_APIC_irq(); - exit_idle(); irq_enter(); + exit_idle(); me = smp_processor_id(); for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) { @@ -2948,6 +2948,10 @@ static inline void __init check_timer(void) } local_irq_disable(); apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n"); + if (x2apic_preenabled) + apic_printk(APIC_QUIET, KERN_INFO + "Perhaps problem with the pre-enabled x2apic mode\n" + "Try booting with x2apic and interrupt-remapping disabled in the bios.\n"); panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " "report. Then try booting with the 'noapic' option.\n"); out: diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 62ae3001ae02..9d59bbacd4e3 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -93,6 +93,8 @@ static int __init early_get_pnodeid(void) if (node_id.s.part_number == UV2_HUB_PART_NUMBER) uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1; + if (node_id.s.part_number == UV2_HUB_PART_NUMBER_X) + uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1; uv_hub_info->hub_revision = uv_min_hub_revision_id; pnode = (node_id.s.node_id >> 1) & ((1 << m_n_config.s.n_skt) - 1); diff --git a/arch/x86/kernel/check.c b/arch/x86/kernel/check.c index 452932d34730..5da1269e8ddc 100644 --- a/arch/x86/kernel/check.c +++ b/arch/x86/kernel/check.c @@ -62,7 +62,8 @@ early_param("memory_corruption_check_size", set_corruption_check_size); void __init setup_bios_corruption_check(void) { - u64 addr = PAGE_SIZE; /* assume first page is reserved anyway */ + phys_addr_t start, end; + u64 i; if (memory_corruption_check == -1) { memory_corruption_check = @@ -82,28 +83,23 @@ void __init setup_bios_corruption_check(void) corruption_check_size = round_up(corruption_check_size, PAGE_SIZE); - while (addr < corruption_check_size && num_scan_areas < MAX_SCAN_AREAS) { - u64 size; - addr = memblock_x86_find_in_range_size(addr, &size, PAGE_SIZE); + for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL) { + start = clamp_t(phys_addr_t, round_up(start, PAGE_SIZE), + PAGE_SIZE, corruption_check_size); + end = clamp_t(phys_addr_t, round_down(end, PAGE_SIZE), + PAGE_SIZE, corruption_check_size); + if (start >= end) + continue; - if (addr == MEMBLOCK_ERROR) - break; - - if (addr >= corruption_check_size) - break; - - if ((addr + size) > corruption_check_size) - size = corruption_check_size - addr; - - memblock_x86_reserve_range(addr, addr + size, "SCAN RAM"); - scan_areas[num_scan_areas].addr = addr; - scan_areas[num_scan_areas].size = size; - num_scan_areas++; + memblock_reserve(start, end - start); + scan_areas[num_scan_areas].addr = start; + scan_areas[num_scan_areas].size = end - start; /* Assume we've already mapped this early memory */ - memset(__va(addr), 0, size); + memset(__va(start), 0, end - start); - addr += size; + if (++num_scan_areas >= MAX_SCAN_AREAS) + break; } if (num_scan_areas) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index c7e46cb35327..f4773f4aae35 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -148,7 +148,6 @@ static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c) static void __cpuinit amd_k7_smp_check(struct cpuinfo_x86 *c) { -#ifdef CONFIG_SMP /* calling is from identify_secondary_cpu() ? */ if (!c->cpu_index) return; @@ -192,7 +191,6 @@ static void __cpuinit amd_k7_smp_check(struct cpuinfo_x86 *c) valid_k7: ; -#endif } static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c) @@ -353,6 +351,13 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c) if (node == NUMA_NO_NODE) node = per_cpu(cpu_llc_id, cpu); + /* + * If core numbers are inconsistent, it's likely a multi-fabric platform, + * so invoke platform-specific handler + */ + if (c->phys_proc_id != node) + x86_cpuinit.fixup_cpu_id(c, node); + if (!node_online(node)) { /* * Two possibilities here: @@ -442,8 +447,6 @@ static void __cpuinit bsp_init_amd(struct cpuinfo_x86 *c) static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) { - u32 dummy; - early_init_amd_mc(c); /* @@ -473,12 +476,12 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) set_cpu_cap(c, X86_FEATURE_EXTD_APICID); } #endif - - rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy); } static void __cpuinit init_amd(struct cpuinfo_x86 *c) { + u32 dummy; + #ifdef CONFIG_SMP unsigned long long value; @@ -657,6 +660,8 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) checking_wrmsrl(MSR_AMD64_MCx_MASK(4), mask); } } + + rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy); } #ifdef CONFIG_X86_32 diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c index e58d978e0758..159103c0b1f4 100644 --- a/arch/x86/kernel/cpu/centaur.c +++ b/arch/x86/kernel/cpu/centaur.c @@ -278,7 +278,7 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c) } #ifdef CONFIG_X86_32 /* Cyrix III family needs CX8 & PGE explicitly enabled. */ - if (c->x86_model >= 6 && c->x86_model <= 9) { + if (c->x86_model >= 6 && c->x86_model <= 13) { rdmsr(MSR_VIA_FCR, lo, hi); lo |= (1<<1 | 1<<7); wrmsr(MSR_VIA_FCR, lo, hi); diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index aa003b13a831..850f2963a420 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -676,9 +676,7 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c) if (this_cpu->c_early_init) this_cpu->c_early_init(c); -#ifdef CONFIG_SMP c->cpu_index = 0; -#endif filter_cpuid_features(c, false); setup_smep(c); @@ -764,10 +762,7 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c) c->apicid = c->initial_apicid; # endif #endif - -#ifdef CONFIG_X86_HT c->phys_proc_id = c->initial_apicid; -#endif } setup_smep(c); @@ -1141,6 +1136,15 @@ static void dbg_restore_debug_regs(void) #endif /* ! CONFIG_KGDB */ /* + * Prints an error where the NUMA and configured core-number mismatch and the + * platform didn't override this to fix it up + */ +void __cpuinit x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node) +{ + pr_err("NUMA core number %d differs from configured core number %d\n", node, c->phys_proc_id); +} + +/* * cpu_init() initializes state that is per-CPU. Some data is already * initialized (naturally) in the bootstrap process, such as the GDT * and IDT. We reload them nevertheless, this function acts as a diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h index 1b22dcc51af4..8bacc7826fb3 100644 --- a/arch/x86/kernel/cpu/cpu.h +++ b/arch/x86/kernel/cpu/cpu.h @@ -1,5 +1,4 @@ #ifndef ARCH_X86_CPU_H - #define ARCH_X86_CPU_H struct cpu_model_info { @@ -35,6 +34,4 @@ extern const struct cpu_dev *const __x86_cpu_dev_start[], extern void get_cpu_cap(struct cpuinfo_x86 *c); extern void cpu_detect_cache_sizes(struct cpuinfo_x86 *c); -extern void get_cpu_cap(struct cpuinfo_x86 *c); - -#endif +#endif /* ARCH_X86_CPU_H */ diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 523131213f08..3e6ff6cbf42a 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -181,7 +181,6 @@ static void __cpuinit trap_init_f00f_bug(void) static void __cpuinit intel_smp_check(struct cpuinfo_x86 *c) { -#ifdef CONFIG_SMP /* calling is from identify_secondary_cpu() ? */ if (!c->cpu_index) return; @@ -198,7 +197,6 @@ static void __cpuinit intel_smp_check(struct cpuinfo_x86 *c) WARN_ONCE(1, "WARNING: SMP operation may be unreliable" "with B stepping processors.\n"); } -#endif } static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c) diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index a3b0811693c9..6b45e5e7a901 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -844,8 +844,7 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu) #include <linux/kobject.h> #include <linux/sysfs.h> - -extern struct sysdev_class cpu_sysdev_class; /* from drivers/base/cpu.c */ +#include <linux/cpu.h> /* pointer to kobject for cpuX/cache */ static DEFINE_PER_CPU(struct kobject *, ici_cache_kobject); @@ -1073,9 +1072,9 @@ err_out: static DECLARE_BITMAP(cache_dev_map, NR_CPUS); /* Add/Remove cache interface for CPU device */ -static int __cpuinit cache_add_dev(struct sys_device * sys_dev) +static int __cpuinit cache_add_dev(struct device *dev) { - unsigned int cpu = sys_dev->id; + unsigned int cpu = dev->id; unsigned long i, j; struct _index_kobject *this_object; struct _cpuid4_info *this_leaf; @@ -1087,7 +1086,7 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) retval = kobject_init_and_add(per_cpu(ici_cache_kobject, cpu), &ktype_percpu_entry, - &sys_dev->kobj, "%s", "cache"); + &dev->kobj, "%s", "cache"); if (retval < 0) { cpuid4_cache_sysfs_exit(cpu); return retval; @@ -1124,9 +1123,9 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) return 0; } -static void __cpuinit cache_remove_dev(struct sys_device * sys_dev) +static void __cpuinit cache_remove_dev(struct device *dev) { - unsigned int cpu = sys_dev->id; + unsigned int cpu = dev->id; unsigned long i; if (per_cpu(ici_cpuid4_info, cpu) == NULL) @@ -1145,17 +1144,17 @@ static int __cpuinit cacheinfo_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; - struct sys_device *sys_dev; + struct device *dev; - sys_dev = get_cpu_sysdev(cpu); + dev = get_cpu_device(cpu); switch (action) { case CPU_ONLINE: case CPU_ONLINE_FROZEN: - cache_add_dev(sys_dev); + cache_add_dev(dev); break; case CPU_DEAD: case CPU_DEAD_FROZEN: - cache_remove_dev(sys_dev); + cache_remove_dev(dev); break; } return NOTIFY_OK; @@ -1174,9 +1173,9 @@ static int __cpuinit cache_sysfs_init(void) for_each_online_cpu(i) { int err; - struct sys_device *sys_dev = get_cpu_sysdev(i); + struct device *dev = get_cpu_device(i); - err = cache_add_dev(sys_dev); + err = cache_add_dev(dev); if (err) return err; } diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c index 319882ef848d..fc4beb393577 100644 --- a/arch/x86/kernel/cpu/mcheck/mce-inject.c +++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c @@ -17,6 +17,7 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/fs.h> +#include <linux/preempt.h> #include <linux/smp.h> #include <linux/notifier.h> #include <linux/kdebug.h> @@ -92,6 +93,18 @@ static int mce_raise_notify(unsigned int cmd, struct pt_regs *regs) return NMI_HANDLED; } +static void mce_irq_ipi(void *info) +{ + int cpu = smp_processor_id(); + struct mce *m = &__get_cpu_var(injectm); + + if (cpumask_test_cpu(cpu, mce_inject_cpumask) && + m->inject_flags & MCJ_EXCEPTION) { + cpumask_clear_cpu(cpu, mce_inject_cpumask); + raise_exception(m, NULL); + } +} + /* Inject mce on current CPU */ static int raise_local(void) { @@ -139,9 +152,10 @@ static void raise_mce(struct mce *m) return; #ifdef CONFIG_X86_LOCAL_APIC - if (m->inject_flags & MCJ_NMI_BROADCAST) { + if (m->inject_flags & (MCJ_IRQ_BRAODCAST | MCJ_NMI_BROADCAST)) { unsigned long start; int cpu; + get_online_cpus(); cpumask_copy(mce_inject_cpumask, cpu_online_mask); cpumask_clear_cpu(get_cpu(), mce_inject_cpumask); @@ -151,13 +165,25 @@ static void raise_mce(struct mce *m) MCJ_CTX(mcpu->inject_flags) != MCJ_CTX_RANDOM) cpumask_clear_cpu(cpu, mce_inject_cpumask); } - if (!cpumask_empty(mce_inject_cpumask)) - apic->send_IPI_mask(mce_inject_cpumask, NMI_VECTOR); + if (!cpumask_empty(mce_inject_cpumask)) { + if (m->inject_flags & MCJ_IRQ_BRAODCAST) { + /* + * don't wait because mce_irq_ipi is necessary + * to be sync with following raise_local + */ + preempt_disable(); + smp_call_function_many(mce_inject_cpumask, + mce_irq_ipi, NULL, 0); + preempt_enable(); + } else if (m->inject_flags & MCJ_NMI_BROADCAST) + apic->send_IPI_mask(mce_inject_cpumask, + NMI_VECTOR); + } start = jiffies; while (!cpumask_empty(mce_inject_cpumask)) { if (!time_before(jiffies, start + 2*HZ)) { printk(KERN_ERR - "Timeout waiting for mce inject NMI %lx\n", + "Timeout waiting for mce inject %lx\n", *cpumask_bits(mce_inject_cpumask)); break; } diff --git a/arch/x86/kernel/cpu/mcheck/mce-internal.h b/arch/x86/kernel/cpu/mcheck/mce-internal.h index fefcc69ee8b5..ed44c8a65858 100644 --- a/arch/x86/kernel/cpu/mcheck/mce-internal.h +++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h @@ -1,4 +1,4 @@ -#include <linux/sysdev.h> +#include <linux/device.h> #include <asm/mce.h> enum severity_level { @@ -17,7 +17,7 @@ enum severity_level { struct mce_bank { u64 ctl; /* subevents to enable */ unsigned char init; /* initialise bank? */ - struct sysdev_attribute attr; /* sysdev attribute */ + struct device_attribute attr; /* device attribute */ char attrname[ATTR_LEN]; /* attribute name */ }; diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 2af127d4c3d1..f22a9f7f6390 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -19,7 +19,7 @@ #include <linux/kernel.h> #include <linux/percpu.h> #include <linux/string.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/delay.h> #include <linux/ctype.h> @@ -95,13 +95,6 @@ static DECLARE_WAIT_QUEUE_HEAD(mce_chrdev_wait); static DEFINE_PER_CPU(struct mce, mces_seen); static int cpu_missing; -/* - * CPU/chipset specific EDAC code can register a notifier call here to print - * MCE errors in a human-readable form. - */ -ATOMIC_NOTIFIER_HEAD(x86_mce_decoder_chain); -EXPORT_SYMBOL_GPL(x86_mce_decoder_chain); - /* MCA banks polled by the period polling timer for corrected events */ DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = { [0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL @@ -109,6 +102,12 @@ DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = { static DEFINE_PER_CPU(struct work_struct, mce_work); +/* + * CPU/chipset specific EDAC code can register a notifier call here to print + * MCE errors in a human-readable form. + */ +ATOMIC_NOTIFIER_HEAD(x86_mce_decoder_chain); + /* Do initial initialization of a struct mce */ void mce_setup(struct mce *m) { @@ -119,9 +118,7 @@ void mce_setup(struct mce *m) m->time = get_seconds(); m->cpuvendor = boot_cpu_data.x86_vendor; m->cpuid = cpuid_eax(1); -#ifdef CONFIG_SMP m->socketid = cpu_data(m->extcpu).phys_proc_id; -#endif m->apicid = cpu_data(m->extcpu).initial_apicid; rdmsrl(MSR_IA32_MCG_CAP, m->mcgcap); } @@ -190,6 +187,57 @@ void mce_log(struct mce *mce) set_bit(0, &mce_need_notify); } +static void drain_mcelog_buffer(void) +{ + unsigned int next, i, prev = 0; + + next = rcu_dereference_check_mce(mcelog.next); + + do { + struct mce *m; + + /* drain what was logged during boot */ + for (i = prev; i < next; i++) { + unsigned long start = jiffies; + unsigned retries = 1; + + m = &mcelog.entry[i]; + + while (!m->finished) { + if (time_after_eq(jiffies, start + 2*retries)) + retries++; + + cpu_relax(); + + if (!m->finished && retries >= 4) { + pr_err("MCE: skipping error being logged currently!\n"); + break; + } + } + smp_rmb(); + atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, m); + } + + memset(mcelog.entry + prev, 0, (next - prev) * sizeof(*m)); + prev = next; + next = cmpxchg(&mcelog.next, prev, 0); + } while (next != prev); +} + + +void mce_register_decode_chain(struct notifier_block *nb) +{ + atomic_notifier_chain_register(&x86_mce_decoder_chain, nb); + drain_mcelog_buffer(); +} +EXPORT_SYMBOL_GPL(mce_register_decode_chain); + +void mce_unregister_decode_chain(struct notifier_block *nb) +{ + atomic_notifier_chain_unregister(&x86_mce_decoder_chain, nb); +} +EXPORT_SYMBOL_GPL(mce_unregister_decode_chain); + static void print_mce(struct mce *m) { int ret = 0; @@ -1770,7 +1818,7 @@ static struct syscore_ops mce_syscore_ops = { }; /* - * mce_sysdev: Sysfs support + * mce_device: Sysfs support */ static void mce_cpu_restart(void *data) @@ -1806,27 +1854,28 @@ static void mce_enable_ce(void *all) __mcheck_cpu_init_timer(); } -static struct sysdev_class mce_sysdev_class = { +static struct bus_type mce_subsys = { .name = "machinecheck", + .dev_name = "machinecheck", }; -DEFINE_PER_CPU(struct sys_device, mce_sysdev); +DEFINE_PER_CPU(struct device, mce_device); __cpuinitdata void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu); -static inline struct mce_bank *attr_to_bank(struct sysdev_attribute *attr) +static inline struct mce_bank *attr_to_bank(struct device_attribute *attr) { return container_of(attr, struct mce_bank, attr); } -static ssize_t show_bank(struct sys_device *s, struct sysdev_attribute *attr, +static ssize_t show_bank(struct device *s, struct device_attribute *attr, char *buf) { return sprintf(buf, "%llx\n", attr_to_bank(attr)->ctl); } -static ssize_t set_bank(struct sys_device *s, struct sysdev_attribute *attr, +static ssize_t set_bank(struct device *s, struct device_attribute *attr, const char *buf, size_t size) { u64 new; @@ -1841,14 +1890,14 @@ static ssize_t set_bank(struct sys_device *s, struct sysdev_attribute *attr, } static ssize_t -show_trigger(struct sys_device *s, struct sysdev_attribute *attr, char *buf) +show_trigger(struct device *s, struct device_attribute *attr, char *buf) { strcpy(buf, mce_helper); strcat(buf, "\n"); return strlen(mce_helper) + 1; } -static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr, +static ssize_t set_trigger(struct device *s, struct device_attribute *attr, const char *buf, size_t siz) { char *p; @@ -1863,8 +1912,8 @@ static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr, return strlen(mce_helper) + !!p; } -static ssize_t set_ignore_ce(struct sys_device *s, - struct sysdev_attribute *attr, +static ssize_t set_ignore_ce(struct device *s, + struct device_attribute *attr, const char *buf, size_t size) { u64 new; @@ -1887,8 +1936,8 @@ static ssize_t set_ignore_ce(struct sys_device *s, return size; } -static ssize_t set_cmci_disabled(struct sys_device *s, - struct sysdev_attribute *attr, +static ssize_t set_cmci_disabled(struct device *s, + struct device_attribute *attr, const char *buf, size_t size) { u64 new; @@ -1910,108 +1959,107 @@ static ssize_t set_cmci_disabled(struct sys_device *s, return size; } -static ssize_t store_int_with_restart(struct sys_device *s, - struct sysdev_attribute *attr, +static ssize_t store_int_with_restart(struct device *s, + struct device_attribute *attr, const char *buf, size_t size) { - ssize_t ret = sysdev_store_int(s, attr, buf, size); + ssize_t ret = device_store_int(s, attr, buf, size); mce_restart(); return ret; } -static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger); -static SYSDEV_INT_ATTR(tolerant, 0644, tolerant); -static SYSDEV_INT_ATTR(monarch_timeout, 0644, monarch_timeout); -static SYSDEV_INT_ATTR(dont_log_ce, 0644, mce_dont_log_ce); +static DEVICE_ATTR(trigger, 0644, show_trigger, set_trigger); +static DEVICE_INT_ATTR(tolerant, 0644, tolerant); +static DEVICE_INT_ATTR(monarch_timeout, 0644, monarch_timeout); +static DEVICE_INT_ATTR(dont_log_ce, 0644, mce_dont_log_ce); -static struct sysdev_ext_attribute attr_check_interval = { - _SYSDEV_ATTR(check_interval, 0644, sysdev_show_int, - store_int_with_restart), +static struct dev_ext_attribute dev_attr_check_interval = { + __ATTR(check_interval, 0644, device_show_int, store_int_with_restart), &check_interval }; -static struct sysdev_ext_attribute attr_ignore_ce = { - _SYSDEV_ATTR(ignore_ce, 0644, sysdev_show_int, set_ignore_ce), +static struct dev_ext_attribute dev_attr_ignore_ce = { + __ATTR(ignore_ce, 0644, device_show_int, set_ignore_ce), &mce_ignore_ce }; -static struct sysdev_ext_attribute attr_cmci_disabled = { - _SYSDEV_ATTR(cmci_disabled, 0644, sysdev_show_int, set_cmci_disabled), +static struct dev_ext_attribute dev_attr_cmci_disabled = { + __ATTR(cmci_disabled, 0644, device_show_int, set_cmci_disabled), &mce_cmci_disabled }; -static struct sysdev_attribute *mce_sysdev_attrs[] = { - &attr_tolerant.attr, - &attr_check_interval.attr, - &attr_trigger, - &attr_monarch_timeout.attr, - &attr_dont_log_ce.attr, - &attr_ignore_ce.attr, - &attr_cmci_disabled.attr, +static struct device_attribute *mce_device_attrs[] = { + &dev_attr_tolerant.attr, + &dev_attr_check_interval.attr, + &dev_attr_trigger, + &dev_attr_monarch_timeout.attr, + &dev_attr_dont_log_ce.attr, + &dev_attr_ignore_ce.attr, + &dev_attr_cmci_disabled.attr, NULL }; -static cpumask_var_t mce_sysdev_initialized; +static cpumask_var_t mce_device_initialized; -/* Per cpu sysdev init. All of the cpus still share the same ctrl bank: */ -static __cpuinit int mce_sysdev_create(unsigned int cpu) +/* Per cpu device init. All of the cpus still share the same ctrl bank: */ +static __cpuinit int mce_device_create(unsigned int cpu) { - struct sys_device *sysdev = &per_cpu(mce_sysdev, cpu); + struct device *dev = &per_cpu(mce_device, cpu); int err; int i, j; if (!mce_available(&boot_cpu_data)) return -EIO; - memset(&sysdev->kobj, 0, sizeof(struct kobject)); - sysdev->id = cpu; - sysdev->cls = &mce_sysdev_class; + memset(&dev->kobj, 0, sizeof(struct kobject)); + dev->id = cpu; + dev->bus = &mce_subsys; - err = sysdev_register(sysdev); + err = device_register(dev); if (err) return err; - for (i = 0; mce_sysdev_attrs[i]; i++) { - err = sysdev_create_file(sysdev, mce_sysdev_attrs[i]); + for (i = 0; mce_device_attrs[i]; i++) { + err = device_create_file(dev, mce_device_attrs[i]); if (err) goto error; } for (j = 0; j < banks; j++) { - err = sysdev_create_file(sysdev, &mce_banks[j].attr); + err = device_create_file(dev, &mce_banks[j].attr); if (err) goto error2; } - cpumask_set_cpu(cpu, mce_sysdev_initialized); + cpumask_set_cpu(cpu, mce_device_initialized); return 0; error2: while (--j >= 0) - sysdev_remove_file(sysdev, &mce_banks[j].attr); + device_remove_file(dev, &mce_banks[j].attr); error: while (--i >= 0) - sysdev_remove_file(sysdev, mce_sysdev_attrs[i]); + device_remove_file(dev, mce_device_attrs[i]); - sysdev_unregister(sysdev); + device_unregister(dev); return err; } -static __cpuinit void mce_sysdev_remove(unsigned int cpu) +static __cpuinit void mce_device_remove(unsigned int cpu) { - struct sys_device *sysdev = &per_cpu(mce_sysdev, cpu); + struct device *dev = &per_cpu(mce_device, cpu); int i; - if (!cpumask_test_cpu(cpu, mce_sysdev_initialized)) + if (!cpumask_test_cpu(cpu, mce_device_initialized)) return; - for (i = 0; mce_sysdev_attrs[i]; i++) - sysdev_remove_file(sysdev, mce_sysdev_attrs[i]); + for (i = 0; mce_device_attrs[i]; i++) + device_remove_file(dev, mce_device_attrs[i]); for (i = 0; i < banks; i++) - sysdev_remove_file(sysdev, &mce_banks[i].attr); + device_remove_file(dev, &mce_banks[i].attr); - sysdev_unregister(sysdev); - cpumask_clear_cpu(cpu, mce_sysdev_initialized); + device_unregister(dev); + cpumask_clear_cpu(cpu, mce_device_initialized); } /* Make sure there are no machine checks on offlined CPUs. */ @@ -2061,7 +2109,7 @@ mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) switch (action) { case CPU_ONLINE: case CPU_ONLINE_FROZEN: - mce_sysdev_create(cpu); + mce_device_create(cpu); if (threshold_cpu_callback) threshold_cpu_callback(action, cpu); break; @@ -2069,7 +2117,7 @@ mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) case CPU_DEAD_FROZEN: if (threshold_cpu_callback) threshold_cpu_callback(action, cpu); - mce_sysdev_remove(cpu); + mce_device_remove(cpu); break; case CPU_DOWN_PREPARE: case CPU_DOWN_PREPARE_FROZEN: @@ -2103,7 +2151,7 @@ static __init void mce_init_banks(void) for (i = 0; i < banks; i++) { struct mce_bank *b = &mce_banks[i]; - struct sysdev_attribute *a = &b->attr; + struct device_attribute *a = &b->attr; sysfs_attr_init(&a->attr); a->attr.name = b->attrname; @@ -2123,16 +2171,16 @@ static __init int mcheck_init_device(void) if (!mce_available(&boot_cpu_data)) return -EIO; - zalloc_cpumask_var(&mce_sysdev_initialized, GFP_KERNEL); + zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL); mce_init_banks(); - err = sysdev_class_register(&mce_sysdev_class); + err = subsys_system_register(&mce_subsys, NULL); if (err) return err; for_each_online_cpu(i) { - err = mce_sysdev_create(i); + err = mce_device_create(i); if (err) return err; } diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index f5474218cffe..ba0b94a7e204 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -17,7 +17,6 @@ #include <linux/notifier.h> #include <linux/kobject.h> #include <linux/percpu.h> -#include <linux/sysdev.h> #include <linux/errno.h> #include <linux/sched.h> #include <linux/sysfs.h> @@ -64,11 +63,9 @@ struct threshold_bank { }; static DEFINE_PER_CPU(struct threshold_bank * [NR_BANKS], threshold_banks); -#ifdef CONFIG_SMP static unsigned char shared_bank[NR_BANKS] = { 0, 0, 0, 0, 1 }; -#endif static DEFINE_PER_CPU(unsigned char, bank_map); /* see which banks are on */ @@ -202,10 +199,9 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c) if (!block) per_cpu(bank_map, cpu) |= (1 << bank); -#ifdef CONFIG_SMP if (shared_bank[bank] && c->cpu_core_id) break; -#endif + offset = setup_APIC_mce(offset, (high & MASK_LVTOFF_HI) >> 20); @@ -531,7 +527,6 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) sprintf(name, "threshold_bank%i", bank); -#ifdef CONFIG_SMP if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) { /* symlink */ i = cpumask_first(cpu_llc_shared_mask(cpu)); @@ -548,7 +543,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) if (!b) goto out; - err = sysfs_create_link(&per_cpu(mce_sysdev, cpu).kobj, + err = sysfs_create_link(&per_cpu(mce_device, cpu).kobj, b->kobj, name); if (err) goto out; @@ -558,7 +553,6 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) goto out; } -#endif b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL); if (!b) { @@ -571,7 +565,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) goto out; } - b->kobj = kobject_create_and_add(name, &per_cpu(mce_sysdev, cpu).kobj); + b->kobj = kobject_create_and_add(name, &per_cpu(mce_device, cpu).kobj); if (!b->kobj) goto out_free; @@ -591,7 +585,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) if (i == cpu) continue; - err = sysfs_create_link(&per_cpu(mce_sysdev, i).kobj, + err = sysfs_create_link(&per_cpu(mce_device, i).kobj, b->kobj, name); if (err) goto out; @@ -669,7 +663,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank) #ifdef CONFIG_SMP /* sibling symlink */ if (shared_bank[bank] && b->blocks->cpu != cpu) { - sysfs_remove_link(&per_cpu(mce_sysdev, cpu).kobj, name); + sysfs_remove_link(&per_cpu(mce_device, cpu).kobj, name); per_cpu(threshold_banks, cpu)[bank] = NULL; return; @@ -681,7 +675,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank) if (i == cpu) continue; - sysfs_remove_link(&per_cpu(mce_sysdev, i).kobj, name); + sysfs_remove_link(&per_cpu(mce_device, i).kobj, name); per_cpu(threshold_banks, i)[bank] = NULL; } diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index 787e06c84ea6..67bb17a37a0a 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -19,7 +19,6 @@ #include <linux/kernel.h> #include <linux/percpu.h> #include <linux/export.h> -#include <linux/sysdev.h> #include <linux/types.h> #include <linux/init.h> #include <linux/smp.h> @@ -69,16 +68,16 @@ static atomic_t therm_throt_en = ATOMIC_INIT(0); static u32 lvtthmr_init __read_mostly; #ifdef CONFIG_SYSFS -#define define_therm_throt_sysdev_one_ro(_name) \ - static SYSDEV_ATTR(_name, 0444, \ - therm_throt_sysdev_show_##_name, \ +#define define_therm_throt_device_one_ro(_name) \ + static DEVICE_ATTR(_name, 0444, \ + therm_throt_device_show_##_name, \ NULL) \ -#define define_therm_throt_sysdev_show_func(event, name) \ +#define define_therm_throt_device_show_func(event, name) \ \ -static ssize_t therm_throt_sysdev_show_##event##_##name( \ - struct sys_device *dev, \ - struct sysdev_attribute *attr, \ +static ssize_t therm_throt_device_show_##event##_##name( \ + struct device *dev, \ + struct device_attribute *attr, \ char *buf) \ { \ unsigned int cpu = dev->id; \ @@ -95,20 +94,20 @@ static ssize_t therm_throt_sysdev_show_##event##_##name( \ return ret; \ } -define_therm_throt_sysdev_show_func(core_throttle, count); -define_therm_throt_sysdev_one_ro(core_throttle_count); +define_therm_throt_device_show_func(core_throttle, count); +define_therm_throt_device_one_ro(core_throttle_count); -define_therm_throt_sysdev_show_func(core_power_limit, count); -define_therm_throt_sysdev_one_ro(core_power_limit_count); +define_therm_throt_device_show_func(core_power_limit, count); +define_therm_throt_device_one_ro(core_power_limit_count); -define_therm_throt_sysdev_show_func(package_throttle, count); -define_therm_throt_sysdev_one_ro(package_throttle_count); +define_therm_throt_device_show_func(package_throttle, count); +define_therm_throt_device_one_ro(package_throttle_count); -define_therm_throt_sysdev_show_func(package_power_limit, count); -define_therm_throt_sysdev_one_ro(package_power_limit_count); +define_therm_throt_device_show_func(package_power_limit, count); +define_therm_throt_device_one_ro(package_power_limit_count); static struct attribute *thermal_throttle_attrs[] = { - &attr_core_throttle_count.attr, + &dev_attr_core_throttle_count.attr, NULL }; @@ -223,36 +222,36 @@ static int thresh_event_valid(int event) #ifdef CONFIG_SYSFS /* Add/Remove thermal_throttle interface for CPU device: */ -static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev, +static __cpuinit int thermal_throttle_add_dev(struct device *dev, unsigned int cpu) { int err; struct cpuinfo_x86 *c = &cpu_data(cpu); - err = sysfs_create_group(&sys_dev->kobj, &thermal_attr_group); + err = sysfs_create_group(&dev->kobj, &thermal_attr_group); if (err) return err; if (cpu_has(c, X86_FEATURE_PLN)) - err = sysfs_add_file_to_group(&sys_dev->kobj, - &attr_core_power_limit_count.attr, + err = sysfs_add_file_to_group(&dev->kobj, + &dev_attr_core_power_limit_count.attr, thermal_attr_group.name); if (cpu_has(c, X86_FEATURE_PTS)) { - err = sysfs_add_file_to_group(&sys_dev->kobj, - &attr_package_throttle_count.attr, + err = sysfs_add_file_to_group(&dev->kobj, + &dev_attr_package_throttle_count.attr, thermal_attr_group.name); if (cpu_has(c, X86_FEATURE_PLN)) - err = sysfs_add_file_to_group(&sys_dev->kobj, - &attr_package_power_limit_count.attr, + err = sysfs_add_file_to_group(&dev->kobj, + &dev_attr_package_power_limit_count.attr, thermal_attr_group.name); } return err; } -static __cpuinit void thermal_throttle_remove_dev(struct sys_device *sys_dev) +static __cpuinit void thermal_throttle_remove_dev(struct device *dev) { - sysfs_remove_group(&sys_dev->kobj, &thermal_attr_group); + sysfs_remove_group(&dev->kobj, &thermal_attr_group); } /* Mutex protecting device creation against CPU hotplug: */ @@ -265,16 +264,16 @@ thermal_throttle_cpu_callback(struct notifier_block *nfb, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; - struct sys_device *sys_dev; + struct device *dev; int err = 0; - sys_dev = get_cpu_sysdev(cpu); + dev = get_cpu_device(cpu); switch (action) { case CPU_UP_PREPARE: case CPU_UP_PREPARE_FROZEN: mutex_lock(&therm_cpu_lock); - err = thermal_throttle_add_dev(sys_dev, cpu); + err = thermal_throttle_add_dev(dev, cpu); mutex_unlock(&therm_cpu_lock); WARN_ON(err); break; @@ -283,7 +282,7 @@ thermal_throttle_cpu_callback(struct notifier_block *nfb, case CPU_DEAD: case CPU_DEAD_FROZEN: mutex_lock(&therm_cpu_lock); - thermal_throttle_remove_dev(sys_dev); + thermal_throttle_remove_dev(dev); mutex_unlock(&therm_cpu_lock); break; } @@ -310,7 +309,7 @@ static __init int thermal_throttle_init_device(void) #endif /* connect live CPUs to sysfs */ for_each_online_cpu(cpu) { - err = thermal_throttle_add_dev(get_cpu_sysdev(cpu), cpu); + err = thermal_throttle_add_dev(get_cpu_device(cpu), cpu); WARN_ON(err); } #ifdef CONFIG_HOTPLUG_CPU @@ -323,17 +322,6 @@ device_initcall(thermal_throttle_init_device); #endif /* CONFIG_SYSFS */ -/* - * Set up the most two significant bit to notify mce log that this thermal - * event type. - * This is a temp solution. May be changed in the future with mce log - * infrasture. - */ -#define CORE_THROTTLED (0) -#define CORE_POWER_LIMIT ((__u64)1 << 62) -#define PACKAGE_THROTTLED ((__u64)2 << 62) -#define PACKAGE_POWER_LIMIT ((__u64)3 << 62) - static void notify_thresholds(__u64 msr_val) { /* check whether the interrupt handler is defined; @@ -363,27 +351,23 @@ static void intel_thermal_interrupt(void) if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT, THERMAL_THROTTLING_EVENT, CORE_LEVEL) != 0) - mce_log_therm_throt_event(CORE_THROTTLED | msr_val); + mce_log_therm_throt_event(msr_val); if (this_cpu_has(X86_FEATURE_PLN)) - if (therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT, + therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT, POWER_LIMIT_EVENT, - CORE_LEVEL) != 0) - mce_log_therm_throt_event(CORE_POWER_LIMIT | msr_val); + CORE_LEVEL); if (this_cpu_has(X86_FEATURE_PTS)) { rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val); - if (therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT, + therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT, THERMAL_THROTTLING_EVENT, - PACKAGE_LEVEL) != 0) - mce_log_therm_throt_event(PACKAGE_THROTTLED | msr_val); + PACKAGE_LEVEL); if (this_cpu_has(X86_FEATURE_PLN)) - if (therm_throt_process(msr_val & + therm_throt_process(msr_val & PACKAGE_THERM_STATUS_POWER_LIMIT, POWER_LIMIT_EVENT, - PACKAGE_LEVEL) != 0) - mce_log_therm_throt_event(PACKAGE_POWER_LIMIT - | msr_val); + PACKAGE_LEVEL); } } @@ -397,8 +381,8 @@ static void (*smp_thermal_vector)(void) = unexpected_thermal_interrupt; asmlinkage void smp_thermal_interrupt(struct pt_regs *regs) { - exit_idle(); irq_enter(); + exit_idle(); inc_irq_stat(irq_thermal_count); smp_thermal_vector(); irq_exit(); diff --git a/arch/x86/kernel/cpu/mcheck/threshold.c b/arch/x86/kernel/cpu/mcheck/threshold.c index d746df2909c9..aa578cadb940 100644 --- a/arch/x86/kernel/cpu/mcheck/threshold.c +++ b/arch/x86/kernel/cpu/mcheck/threshold.c @@ -19,8 +19,8 @@ void (*mce_threshold_vector)(void) = default_threshold_interrupt; asmlinkage void smp_threshold_interrupt(void) { - exit_idle(); irq_enter(); + exit_idle(); inc_irq_stat(irq_threshold_count); mce_threshold_vector(); irq_exit(); diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index a71efcdbb092..97b26356e9ee 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -547,6 +547,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base, if (tmp != mask_lo) { printk(KERN_WARNING "mtrr: your BIOS has configured an incorrect mask, fixing it.\n"); + add_taint(TAINT_FIRMWARE_WORKAROUND); mask_lo = tmp; } } @@ -693,6 +694,7 @@ static void prepare_set(void) __acquires(set_atomicity_lock) /* Disable MTRRs, and set the default type to uncached */ mtrr_wrmsr(MSR_MTRRdefType, deftype_lo & ~0xcff, deftype_hi); + wbinvd(); } static void post_set(void) __releases(set_atomicity_lock) diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 640891014b2a..5adce1040b11 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -312,12 +312,8 @@ int x86_setup_perfctr(struct perf_event *event) return -EOPNOTSUPP; } - /* - * Do not allow config1 (extended registers) to propagate, - * there's no sane user-space generalization yet: - */ if (attr->type == PERF_TYPE_RAW) - return 0; + return x86_pmu_extra_regs(event->attr.config, event); if (attr->type == PERF_TYPE_HW_CACHE) return set_ext_hw_attr(hwc, event); @@ -488,18 +484,195 @@ static inline int is_x86_event(struct perf_event *event) return event->pmu == &pmu; } +/* + * Event scheduler state: + * + * Assign events iterating over all events and counters, beginning + * with events with least weights first. Keep the current iterator + * state in struct sched_state. + */ +struct sched_state { + int weight; + int event; /* event index */ + int counter; /* counter index */ + int unassigned; /* number of events to be assigned left */ + unsigned long used[BITS_TO_LONGS(X86_PMC_IDX_MAX)]; +}; + +/* Total max is X86_PMC_IDX_MAX, but we are O(n!) limited */ +#define SCHED_STATES_MAX 2 + +struct perf_sched { + int max_weight; + int max_events; + struct event_constraint **constraints; + struct sched_state state; + int saved_states; + struct sched_state saved[SCHED_STATES_MAX]; +}; + +/* + * Initialize interator that runs through all events and counters. + */ +static void perf_sched_init(struct perf_sched *sched, struct event_constraint **c, + int num, int wmin, int wmax) +{ + int idx; + + memset(sched, 0, sizeof(*sched)); + sched->max_events = num; + sched->max_weight = wmax; + sched->constraints = c; + + for (idx = 0; idx < num; idx++) { + if (c[idx]->weight == wmin) + break; + } + + sched->state.event = idx; /* start with min weight */ + sched->state.weight = wmin; + sched->state.unassigned = num; +} + +static void perf_sched_save_state(struct perf_sched *sched) +{ + if (WARN_ON_ONCE(sched->saved_states >= SCHED_STATES_MAX)) + return; + + sched->saved[sched->saved_states] = sched->state; + sched->saved_states++; +} + +static bool perf_sched_restore_state(struct perf_sched *sched) +{ + if (!sched->saved_states) + return false; + + sched->saved_states--; + sched->state = sched->saved[sched->saved_states]; + + /* continue with next counter: */ + clear_bit(sched->state.counter++, sched->state.used); + + return true; +} + +/* + * Select a counter for the current event to schedule. Return true on + * success. + */ +static bool __perf_sched_find_counter(struct perf_sched *sched) +{ + struct event_constraint *c; + int idx; + + if (!sched->state.unassigned) + return false; + + if (sched->state.event >= sched->max_events) + return false; + + c = sched->constraints[sched->state.event]; + + /* Prefer fixed purpose counters */ + if (x86_pmu.num_counters_fixed) { + idx = X86_PMC_IDX_FIXED; + for_each_set_bit_cont(idx, c->idxmsk, X86_PMC_IDX_MAX) { + if (!__test_and_set_bit(idx, sched->state.used)) + goto done; + } + } + /* Grab the first unused counter starting with idx */ + idx = sched->state.counter; + for_each_set_bit_cont(idx, c->idxmsk, X86_PMC_IDX_FIXED) { + if (!__test_and_set_bit(idx, sched->state.used)) + goto done; + } + + return false; + +done: + sched->state.counter = idx; + + if (c->overlap) + perf_sched_save_state(sched); + + return true; +} + +static bool perf_sched_find_counter(struct perf_sched *sched) +{ + while (!__perf_sched_find_counter(sched)) { + if (!perf_sched_restore_state(sched)) + return false; + } + + return true; +} + +/* + * Go through all unassigned events and find the next one to schedule. + * Take events with the least weight first. Return true on success. + */ +static bool perf_sched_next_event(struct perf_sched *sched) +{ + struct event_constraint *c; + + if (!sched->state.unassigned || !--sched->state.unassigned) + return false; + + do { + /* next event */ + sched->state.event++; + if (sched->state.event >= sched->max_events) { + /* next weight */ + sched->state.event = 0; + sched->state.weight++; + if (sched->state.weight > sched->max_weight) + return false; + } + c = sched->constraints[sched->state.event]; + } while (c->weight != sched->state.weight); + + sched->state.counter = 0; /* start with first counter */ + + return true; +} + +/* + * Assign a counter for each event. + */ +static int perf_assign_events(struct event_constraint **constraints, int n, + int wmin, int wmax, int *assign) +{ + struct perf_sched sched; + + perf_sched_init(&sched, constraints, n, wmin, wmax); + + do { + if (!perf_sched_find_counter(&sched)) + break; /* failed */ + if (assign) + assign[sched.state.event] = sched.state.counter; + } while (perf_sched_next_event(&sched)); + + return sched.state.unassigned; +} + int x86_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign) { struct event_constraint *c, *constraints[X86_PMC_IDX_MAX]; unsigned long used_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)]; - int i, j, w, wmax, num = 0; + int i, wmin, wmax, num = 0; struct hw_perf_event *hwc; bitmap_zero(used_mask, X86_PMC_IDX_MAX); - for (i = 0; i < n; i++) { + for (i = 0, wmin = X86_PMC_IDX_MAX, wmax = 0; i < n; i++) { c = x86_pmu.get_event_constraints(cpuc, cpuc->event_list[i]); constraints[i] = c; + wmin = min(wmin, c->weight); + wmax = max(wmax, c->weight); } /* @@ -525,59 +698,11 @@ int x86_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign) if (assign) assign[i] = hwc->idx; } - if (i == n) - goto done; - - /* - * begin slow path - */ - - bitmap_zero(used_mask, X86_PMC_IDX_MAX); - - /* - * weight = number of possible counters - * - * 1 = most constrained, only works on one counter - * wmax = least constrained, works on any counter - * - * assign events to counters starting with most - * constrained events. - */ - wmax = x86_pmu.num_counters; - - /* - * when fixed event counters are present, - * wmax is incremented by 1 to account - * for one more choice - */ - if (x86_pmu.num_counters_fixed) - wmax++; - - for (w = 1, num = n; num && w <= wmax; w++) { - /* for each event */ - for (i = 0; num && i < n; i++) { - c = constraints[i]; - hwc = &cpuc->event_list[i]->hw; - - if (c->weight != w) - continue; - for_each_set_bit(j, c->idxmsk, X86_PMC_IDX_MAX) { - if (!test_bit(j, used_mask)) - break; - } - - if (j == X86_PMC_IDX_MAX) - break; + /* slow path */ + if (i != n) + num = perf_assign_events(constraints, n, wmin, wmax, assign); - __set_bit(j, used_mask); - - if (assign) - assign[i] = j; - num--; - } - } -done: /* * scheduling failed or is just a simulation, * free resources if necessary @@ -588,7 +713,7 @@ done: x86_pmu.put_event_constraints(cpuc, cpuc->event_list[i]); } } - return num ? -ENOSPC : 0; + return num ? -EINVAL : 0; } /* @@ -607,7 +732,7 @@ static int collect_events(struct cpu_hw_events *cpuc, struct perf_event *leader, if (is_x86_event(leader)) { if (n >= max_count) - return -ENOSPC; + return -EINVAL; cpuc->event_list[n] = leader; n++; } @@ -620,7 +745,7 @@ static int collect_events(struct cpu_hw_events *cpuc, struct perf_event *leader, continue; if (n >= max_count) - return -ENOSPC; + return -EINVAL; cpuc->event_list[n] = event; n++; @@ -1123,6 +1248,7 @@ static void __init pmu_check_apic(void) static int __init init_hw_perf_events(void) { + struct x86_pmu_quirk *quirk; struct event_constraint *c; int err; @@ -1151,8 +1277,8 @@ static int __init init_hw_perf_events(void) pr_cont("%s PMU driver.\n", x86_pmu.name); - if (x86_pmu.quirks) - x86_pmu.quirks(); + for (quirk = x86_pmu.quirks; quirk; quirk = quirk->next) + quirk->func(); if (x86_pmu.num_counters > X86_PMC_MAX_GENERIC) { WARN(1, KERN_ERR "hw perf events %d > max(%d), clipping!", @@ -1175,12 +1301,18 @@ static int __init init_hw_perf_events(void) unconstrained = (struct event_constraint) __EVENT_CONSTRAINT(0, (1ULL << x86_pmu.num_counters) - 1, - 0, x86_pmu.num_counters); + 0, x86_pmu.num_counters, 0); if (x86_pmu.event_constraints) { + /* + * event on fixed counter2 (REF_CYCLES) only works on this + * counter, so do not extend mask to generic counters + */ for_each_event_constraint(c, x86_pmu.event_constraints) { - if (c->cmask != X86_RAW_EVENT_MASK) + if (c->cmask != X86_RAW_EVENT_MASK + || c->idxmsk64 == X86_PMC_MSK_FIXED_REF_CYCLES) { continue; + } c->idxmsk64 |= (1ULL << x86_pmu.num_counters) - 1; c->weight += x86_pmu.num_counters; @@ -1316,7 +1448,7 @@ static int validate_event(struct perf_event *event) c = x86_pmu.get_event_constraints(fake_cpuc, event); if (!c || !c->weight) - ret = -ENOSPC; + ret = -EINVAL; if (x86_pmu.put_event_constraints) x86_pmu.put_event_constraints(fake_cpuc, event); @@ -1341,7 +1473,7 @@ static int validate_group(struct perf_event *event) { struct perf_event *leader = event->group_leader; struct cpu_hw_events *fake_cpuc; - int ret = -ENOSPC, n; + int ret = -EINVAL, n; fake_cpuc = allocate_fake_cpuc(); if (IS_ERR(fake_cpuc)) @@ -1570,3 +1702,15 @@ unsigned long perf_misc_flags(struct pt_regs *regs) return misc; } + +void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap) +{ + cap->version = x86_pmu.version; + cap->num_counters_gp = x86_pmu.num_counters; + cap->num_counters_fixed = x86_pmu.num_counters_fixed; + cap->bit_width_gp = x86_pmu.cntval_bits; + cap->bit_width_fixed = x86_pmu.cntval_bits; + cap->events_mask = (unsigned int)x86_pmu.events_maskl; + cap->events_mask_len = x86_pmu.events_mask_len; +} +EXPORT_SYMBOL_GPL(perf_get_x86_pmu_capability); diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h index b9698d40ac4b..8944062f46e2 100644 --- a/arch/x86/kernel/cpu/perf_event.h +++ b/arch/x86/kernel/cpu/perf_event.h @@ -45,6 +45,7 @@ struct event_constraint { u64 code; u64 cmask; int weight; + int overlap; }; struct amd_nb { @@ -151,15 +152,40 @@ struct cpu_hw_events { void *kfree_on_online; }; -#define __EVENT_CONSTRAINT(c, n, m, w) {\ +#define __EVENT_CONSTRAINT(c, n, m, w, o) {\ { .idxmsk64 = (n) }, \ .code = (c), \ .cmask = (m), \ .weight = (w), \ + .overlap = (o), \ } #define EVENT_CONSTRAINT(c, n, m) \ - __EVENT_CONSTRAINT(c, n, m, HWEIGHT(n)) + __EVENT_CONSTRAINT(c, n, m, HWEIGHT(n), 0) + +/* + * The overlap flag marks event constraints with overlapping counter + * masks. This is the case if the counter mask of such an event is not + * a subset of any other counter mask of a constraint with an equal or + * higher weight, e.g.: + * + * c_overlaps = EVENT_CONSTRAINT_OVERLAP(0, 0x09, 0); + * c_another1 = EVENT_CONSTRAINT(0, 0x07, 0); + * c_another2 = EVENT_CONSTRAINT(0, 0x38, 0); + * + * The event scheduler may not select the correct counter in the first + * cycle because it needs to know which subsequent events will be + * scheduled. It may fail to schedule the events then. So we set the + * overlap flag for such constraints to give the scheduler a hint which + * events to select for counter rescheduling. + * + * Care must be taken as the rescheduling algorithm is O(n!) which + * will increase scheduling cycles for an over-commited system + * dramatically. The number of such EVENT_CONSTRAINT_OVERLAP() macros + * and its counter masks must be kept at a minimum. + */ +#define EVENT_CONSTRAINT_OVERLAP(c, n, m) \ + __EVENT_CONSTRAINT(c, n, m, HWEIGHT(n), 1) /* * Constraint on the Event code. @@ -235,6 +261,11 @@ union perf_capabilities { u64 capabilities; }; +struct x86_pmu_quirk { + struct x86_pmu_quirk *next; + void (*func)(void); +}; + /* * struct x86_pmu - generic x86 pmu */ @@ -259,6 +290,11 @@ struct x86_pmu { int num_counters_fixed; int cntval_bits; u64 cntval_mask; + union { + unsigned long events_maskl; + unsigned long events_mask[BITS_TO_LONGS(ARCH_PERFMON_EVENTS_COUNT)]; + }; + int events_mask_len; int apic; u64 max_period; struct event_constraint * @@ -268,7 +304,7 @@ struct x86_pmu { void (*put_event_constraints)(struct cpu_hw_events *cpuc, struct perf_event *event); struct event_constraint *event_constraints; - void (*quirks)(void); + struct x86_pmu_quirk *quirks; int perfctr_second_write; int (*cpu_prepare)(int cpu); @@ -309,6 +345,15 @@ struct x86_pmu { struct perf_guest_switch_msr *(*guest_get_msrs)(int *nr); }; +#define x86_add_quirk(func_) \ +do { \ + static struct x86_pmu_quirk __quirk __initdata = { \ + .func = func_, \ + }; \ + __quirk.next = x86_pmu.quirks; \ + x86_pmu.quirks = &__quirk; \ +} while (0) + #define ERF_NO_HT_SHARING 1 #define ERF_HAS_RSP_1 2 diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c index aeefd45697a2..0397b23be8e9 100644 --- a/arch/x86/kernel/cpu/perf_event_amd.c +++ b/arch/x86/kernel/cpu/perf_event_amd.c @@ -492,7 +492,7 @@ static __initconst const struct x86_pmu amd_pmu = { static struct event_constraint amd_f15_PMC0 = EVENT_CONSTRAINT(0, 0x01, 0); static struct event_constraint amd_f15_PMC20 = EVENT_CONSTRAINT(0, 0x07, 0); static struct event_constraint amd_f15_PMC3 = EVENT_CONSTRAINT(0, 0x08, 0); -static struct event_constraint amd_f15_PMC30 = EVENT_CONSTRAINT(0, 0x09, 0); +static struct event_constraint amd_f15_PMC30 = EVENT_CONSTRAINT_OVERLAP(0, 0x09, 0); static struct event_constraint amd_f15_PMC50 = EVENT_CONSTRAINT(0, 0x3F, 0); static struct event_constraint amd_f15_PMC53 = EVENT_CONSTRAINT(0, 0x38, 0); diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c index ab6343d21825..3b8a2d30d14e 100644 --- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c +++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c @@ -199,8 +199,7 @@ static int force_ibs_eilvt_setup(void) goto out; } - pr_err(FW_BUG "using offset %d for IBS interrupts\n", offset); - pr_err(FW_BUG "workaround enabled for IBS LVT offset\n"); + pr_info("IBS: LVT offset %d assigned\n", offset); return 0; out: @@ -265,19 +264,23 @@ perf_ibs_cpu_notifier(struct notifier_block *self, unsigned long action, void *h static __init int amd_ibs_init(void) { u32 caps; - int ret; + int ret = -EINVAL; caps = __get_ibs_caps(); if (!caps) return -ENODEV; /* ibs not supported by the cpu */ - if (!ibs_eilvt_valid()) { - ret = force_ibs_eilvt_setup(); - if (ret) { - pr_err("Failed to setup IBS, %d\n", ret); - return ret; - } - } + /* + * Force LVT offset assignment for family 10h: The offsets are + * not assigned by the BIOS for this family, so the OS is + * responsible for doing it. If the OS assignment fails, fall + * back to BIOS settings and try to setup this. + */ + if (boot_cpu_data.x86 == 0x10) + force_ibs_eilvt_setup(); + + if (!ibs_eilvt_valid()) + goto out; get_online_cpus(); ibs_caps = caps; @@ -287,7 +290,11 @@ static __init int amd_ibs_init(void) smp_call_function(setup_APIC_ibs, NULL, 1); put_online_cpus(); - return perf_event_ibs_init(); + ret = perf_event_ibs_init(); +out: + if (ret) + pr_err("Failed to setup IBS, %d\n", ret); + return ret; } /* Since we need the pci subsystem to init ibs we can't do this earlier: */ diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 2be5ebe99872..3bd37bdf1b8e 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -28,6 +28,7 @@ static u64 intel_perfmon_event_map[PERF_COUNT_HW_MAX] __read_mostly = [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4, [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5, [PERF_COUNT_HW_BUS_CYCLES] = 0x013c, + [PERF_COUNT_HW_REF_CPU_CYCLES] = 0x0300, /* pseudo-encoding */ }; static struct event_constraint intel_core_event_constraints[] __read_mostly = @@ -45,12 +46,7 @@ static struct event_constraint intel_core2_event_constraints[] __read_mostly = { FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ - /* - * Core2 has Fixed Counter 2 listed as CPU_CLK_UNHALTED.REF and event - * 0x013c as CPU_CLK_UNHALTED.BUS and specifies there is a fixed - * ratio between these counters. - */ - /* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */ + FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */ INTEL_EVENT_CONSTRAINT(0x10, 0x1), /* FP_COMP_OPS_EXE */ INTEL_EVENT_CONSTRAINT(0x11, 0x2), /* FP_ASSIST */ INTEL_EVENT_CONSTRAINT(0x12, 0x2), /* MUL */ @@ -68,7 +64,7 @@ static struct event_constraint intel_nehalem_event_constraints[] __read_mostly = { FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ - /* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */ + FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */ INTEL_EVENT_CONSTRAINT(0x40, 0x3), /* L1D_CACHE_LD */ INTEL_EVENT_CONSTRAINT(0x41, 0x3), /* L1D_CACHE_ST */ INTEL_EVENT_CONSTRAINT(0x42, 0x3), /* L1D_CACHE_LOCK */ @@ -90,7 +86,7 @@ static struct event_constraint intel_westmere_event_constraints[] __read_mostly { FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ - /* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */ + FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */ INTEL_EVENT_CONSTRAINT(0x51, 0x3), /* L1D */ INTEL_EVENT_CONSTRAINT(0x60, 0x1), /* OFFCORE_REQUESTS_OUTSTANDING */ INTEL_EVENT_CONSTRAINT(0x63, 0x3), /* CACHE_LOCK_CYCLES */ @@ -102,7 +98,7 @@ static struct event_constraint intel_snb_event_constraints[] __read_mostly = { FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ - /* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */ + FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */ INTEL_EVENT_CONSTRAINT(0x48, 0x4), /* L1D_PEND_MISS.PENDING */ INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PREC_DIST */ INTEL_EVENT_CONSTRAINT(0xcd, 0x8), /* MEM_TRANS_RETIRED.LOAD_LATENCY */ @@ -125,7 +121,7 @@ static struct event_constraint intel_gen_event_constraints[] __read_mostly = { FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ - /* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */ + FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */ EVENT_CONSTRAINT_END }; @@ -1169,7 +1165,7 @@ again: */ c = &unconstrained; } else if (intel_try_alt_er(event, orig_idx)) { - raw_spin_unlock(&era->lock); + raw_spin_unlock_irqrestore(&era->lock, flags); goto again; } raw_spin_unlock_irqrestore(&era->lock, flags); @@ -1519,7 +1515,7 @@ static __initconst const struct x86_pmu intel_pmu = { .guest_get_msrs = intel_guest_get_msrs, }; -static void intel_clovertown_quirks(void) +static __init void intel_clovertown_quirk(void) { /* * PEBS is unreliable due to: @@ -1545,12 +1541,60 @@ static void intel_clovertown_quirks(void) x86_pmu.pebs_constraints = NULL; } +static __init void intel_sandybridge_quirk(void) +{ + printk(KERN_WARNING "PEBS disabled due to CPU errata.\n"); + x86_pmu.pebs = 0; + x86_pmu.pebs_constraints = NULL; +} + +static const struct { int id; char *name; } intel_arch_events_map[] __initconst = { + { PERF_COUNT_HW_CPU_CYCLES, "cpu cycles" }, + { PERF_COUNT_HW_INSTRUCTIONS, "instructions" }, + { PERF_COUNT_HW_BUS_CYCLES, "bus cycles" }, + { PERF_COUNT_HW_CACHE_REFERENCES, "cache references" }, + { PERF_COUNT_HW_CACHE_MISSES, "cache misses" }, + { PERF_COUNT_HW_BRANCH_INSTRUCTIONS, "branch instructions" }, + { PERF_COUNT_HW_BRANCH_MISSES, "branch misses" }, +}; + +static __init void intel_arch_events_quirk(void) +{ + int bit; + + /* disable event that reported as not presend by cpuid */ + for_each_set_bit(bit, x86_pmu.events_mask, ARRAY_SIZE(intel_arch_events_map)) { + intel_perfmon_event_map[intel_arch_events_map[bit].id] = 0; + printk(KERN_WARNING "CPUID marked event: \'%s\' unavailable\n", + intel_arch_events_map[bit].name); + } +} + +static __init void intel_nehalem_quirk(void) +{ + union cpuid10_ebx ebx; + + ebx.full = x86_pmu.events_maskl; + if (ebx.split.no_branch_misses_retired) { + /* + * Erratum AAJ80 detected, we work it around by using + * the BR_MISP_EXEC.ANY event. This will over-count + * branch-misses, but it's still much better than the + * architectural event which is often completely bogus: + */ + intel_perfmon_event_map[PERF_COUNT_HW_BRANCH_MISSES] = 0x7f89; + ebx.split.no_branch_misses_retired = 0; + x86_pmu.events_maskl = ebx.full; + printk(KERN_INFO "CPU erratum AAJ80 worked around\n"); + } +} + __init int intel_pmu_init(void) { union cpuid10_edx edx; union cpuid10_eax eax; + union cpuid10_ebx ebx; unsigned int unused; - unsigned int ebx; int version; if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { @@ -1567,8 +1611,8 @@ __init int intel_pmu_init(void) * Check whether the Architectural PerfMon supports * Branch Misses Retired hw_event or not. */ - cpuid(10, &eax.full, &ebx, &unused, &edx.full); - if (eax.split.mask_length <= ARCH_PERFMON_BRANCH_MISSES_RETIRED) + cpuid(10, &eax.full, &ebx.full, &unused, &edx.full); + if (eax.split.mask_length < ARCH_PERFMON_EVENTS_COUNT) return -ENODEV; version = eax.split.version_id; @@ -1582,6 +1626,9 @@ __init int intel_pmu_init(void) x86_pmu.cntval_bits = eax.split.bit_width; x86_pmu.cntval_mask = (1ULL << eax.split.bit_width) - 1; + x86_pmu.events_maskl = ebx.full; + x86_pmu.events_mask_len = eax.split.mask_length; + /* * Quirk: v2 perfmon does not report fixed-purpose events, so * assume at least 3 events: @@ -1601,6 +1648,8 @@ __init int intel_pmu_init(void) intel_ds_init(); + x86_add_quirk(intel_arch_events_quirk); /* Install first, so it runs last */ + /* * Install the hw-cache-events table: */ @@ -1610,7 +1659,7 @@ __init int intel_pmu_init(void) break; case 15: /* original 65 nm celeron/pentium/core2/xeon, "Merom"/"Conroe" */ - x86_pmu.quirks = intel_clovertown_quirks; + x86_add_quirk(intel_clovertown_quirk); case 22: /* single-core 65 nm celeron/core2solo "Merom-L"/"Conroe-L" */ case 23: /* current 45 nm celeron/core2/xeon "Penryn"/"Wolfdale" */ case 29: /* six-core 45 nm xeon "Dunnington" */ @@ -1644,17 +1693,8 @@ __init int intel_pmu_init(void) /* UOPS_EXECUTED.CORE_ACTIVE_CYCLES,c=1,i=1 */ intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x1803fb1; - if (ebx & 0x40) { - /* - * Erratum AAJ80 detected, we work it around by using - * the BR_MISP_EXEC.ANY event. This will over-count - * branch-misses, but it's still much better than the - * architectural event which is often completely bogus: - */ - intel_perfmon_event_map[PERF_COUNT_HW_BRANCH_MISSES] = 0x7f89; + x86_add_quirk(intel_nehalem_quirk); - pr_cont("erratum AAJ80 worked around, "); - } pr_cont("Nehalem events, "); break; @@ -1694,6 +1734,7 @@ __init int intel_pmu_init(void) break; case 42: /* SandyBridge */ + x86_add_quirk(intel_sandybridge_quirk); case 45: /* SandyBridge, "Romely-EP" */ memcpy(hw_cache_event_ids, snb_hw_cache_event_ids, sizeof(hw_cache_event_ids)); @@ -1730,5 +1771,6 @@ __init int intel_pmu_init(void) break; } } + return 0; } diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index c0d238f49db8..73da6b64f5b7 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -493,6 +493,7 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs) unsigned long from = cpuc->lbr_entries[0].from; unsigned long old_to, to = cpuc->lbr_entries[0].to; unsigned long ip = regs->ip; + int is_64bit = 0; /* * We don't need to fixup if the PEBS assist is fault like @@ -544,7 +545,10 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs) } else kaddr = (void *)to; - kernel_insn_init(&insn, kaddr); +#ifdef CONFIG_X86_64 + is_64bit = kernel_ip(to) || !test_thread_flag(TIF_IA32); +#endif + insn_init(&insn, kaddr, is_64bit); insn_get_length(&insn); to += insn.length; } while (to < ip); diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index 492bf1358a7c..ef484d9d0a25 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -1268,7 +1268,7 @@ reserve: } done: - return num ? -ENOSPC : 0; + return num ? -EINVAL : 0; } static __initconst const struct x86_pmu p4_pmu = { diff --git a/arch/x86/kernel/cpu/powerflags.c b/arch/x86/kernel/cpu/powerflags.c index 5abbea297e0c..7b3fe56b1c21 100644 --- a/arch/x86/kernel/cpu/powerflags.c +++ b/arch/x86/kernel/cpu/powerflags.c @@ -16,5 +16,6 @@ const char *const x86_power_flags[32] = { "100mhzsteps", "hwpstate", "", /* tsc invariant mapped to constant_tsc */ - /* nothing */ + "cpb", /* core performance boost */ + "eff_freq_ro", /* Readonly aperf/mperf */ }; diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c index 14b23140e81f..8022c6681485 100644 --- a/arch/x86/kernel/cpu/proc.c +++ b/arch/x86/kernel/cpu/proc.c @@ -64,12 +64,10 @@ static void show_cpuinfo_misc(struct seq_file *m, struct cpuinfo_x86 *c) static int show_cpuinfo(struct seq_file *m, void *v) { struct cpuinfo_x86 *c = v; - unsigned int cpu = 0; + unsigned int cpu; int i; -#ifdef CONFIG_SMP cpu = c->cpu_index; -#endif seq_printf(m, "processor\t: %u\n" "vendor_id\t: %s\n" "cpu family\t: %d\n" diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c index 212a6a42527c..a524353d93f2 100644 --- a/arch/x86/kernel/cpuid.c +++ b/arch/x86/kernel/cpuid.c @@ -177,7 +177,7 @@ static struct notifier_block __refdata cpuid_class_cpu_notifier = .notifier_call = cpuid_class_cpu_callback, }; -static char *cpuid_devnode(struct device *dev, mode_t *mode) +static char *cpuid_devnode(struct device *dev, umode_t *mode) { return kasprintf(GFP_KERNEL, "cpu/%u/cpuid", MINOR(dev->devt)); } diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c index 3b97a80ce329..c99f9ed013d5 100644 --- a/arch/x86/kernel/dumpstack_32.c +++ b/arch/x86/kernel/dumpstack_32.c @@ -116,16 +116,16 @@ void show_registers(struct pt_regs *regs) for (i = 0; i < code_len; i++, ip++) { if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) { - printk(" Bad EIP value."); + printk(KERN_CONT " Bad EIP value."); break; } if (ip == (u8 *)regs->ip) - printk("<%02x> ", c); + printk(KERN_CONT "<%02x> ", c); else - printk("%02x ", c); + printk(KERN_CONT "%02x ", c); } } - printk("\n"); + printk(KERN_CONT "\n"); } int is_valid_bugaddr(unsigned long ip) diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c index 19853ad8afc5..6d728d9284bd 100644 --- a/arch/x86/kernel/dumpstack_64.c +++ b/arch/x86/kernel/dumpstack_64.c @@ -284,16 +284,16 @@ void show_registers(struct pt_regs *regs) for (i = 0; i < code_len; i++, ip++) { if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) { - printk(" Bad RIP value."); + printk(KERN_CONT " Bad RIP value."); break; } if (ip == (u8 *)regs->ip) - printk("<%02x> ", c); + printk(KERN_CONT "<%02x> ", c); else - printk("%02x ", c); + printk(KERN_CONT "%02x ", c); } } - printk("\n"); + printk(KERN_CONT "\n"); } int is_valid_bugaddr(unsigned long ip) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 303a0e48f076..8071e2f3d6eb 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -738,35 +738,17 @@ core_initcall(e820_mark_nvs_memory); /* * pre allocated 4k and reserved it in memblock and e820_saved */ -u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) +u64 __init early_reserve_e820(u64 size, u64 align) { - u64 size = 0; u64 addr; - u64 start; - for (start = startt; ; start += size) { - start = memblock_x86_find_in_range_size(start, &size, align); - if (start == MEMBLOCK_ERROR) - return 0; - if (size >= sizet) - break; + addr = __memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE); + if (addr) { + e820_update_range_saved(addr, size, E820_RAM, E820_RESERVED); + printk(KERN_INFO "update e820_saved for early_reserve_e820\n"); + update_e820_saved(); } -#ifdef CONFIG_X86_32 - if (start >= MAXMEM) - return 0; - if (start + size > MAXMEM) - size = MAXMEM - start; -#endif - - addr = round_down(start + size - sizet, align); - if (addr < start) - return 0; - memblock_x86_reserve_range(addr, addr + sizet, "new next"); - e820_update_range_saved(addr, sizet, E820_RAM, E820_RESERVED); - printk(KERN_INFO "update e820_saved for early_reserve_e820\n"); - update_e820_saved(); - return addr; } @@ -1090,7 +1072,7 @@ void __init memblock_x86_fill(void) * We are safe to enable resizing, beause memblock_x86_fill() * is rather later for x86 */ - memblock_can_resize = 1; + memblock_allow_resize(); for (i = 0; i < e820.nr_map; i++) { struct e820entry *ei = &e820.map[i]; @@ -1105,22 +1087,36 @@ void __init memblock_x86_fill(void) memblock_add(ei->addr, ei->size); } - memblock_analyze(); memblock_dump_all(); } void __init memblock_find_dma_reserve(void) { #ifdef CONFIG_X86_64 - u64 free_size_pfn; - u64 mem_size_pfn; + u64 nr_pages = 0, nr_free_pages = 0; + unsigned long start_pfn, end_pfn; + phys_addr_t start, end; + int i; + u64 u; + /* * need to find out used area below MAX_DMA_PFN * need to use memblock to get free size in [0, MAX_DMA_PFN] * at first, and assume boot_mem will not take below MAX_DMA_PFN */ - mem_size_pfn = memblock_x86_memory_in_range(0, MAX_DMA_PFN << PAGE_SHIFT) >> PAGE_SHIFT; - free_size_pfn = memblock_x86_free_memory_in_range(0, MAX_DMA_PFN << PAGE_SHIFT) >> PAGE_SHIFT; - set_dma_reserve(mem_size_pfn - free_size_pfn); + for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, NULL) { + start_pfn = min_t(unsigned long, start_pfn, MAX_DMA_PFN); + end_pfn = min_t(unsigned long, end_pfn, MAX_DMA_PFN); + nr_pages += end_pfn - start_pfn; + } + + for_each_free_mem_range(u, MAX_NUMNODES, &start, &end, NULL) { + start_pfn = min_t(unsigned long, PFN_UP(start), MAX_DMA_PFN); + end_pfn = min_t(unsigned long, PFN_DOWN(end), MAX_DMA_PFN); + if (start_pfn < end_pfn) + nr_free_pages += end_pfn - start_pfn; + } + + set_dma_reserve(nr_pages - nr_free_pages); #endif } diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c index cd28a350f7f9..9d42a52d2331 100644 --- a/arch/x86/kernel/early_printk.c +++ b/arch/x86/kernel/early_printk.c @@ -247,7 +247,7 @@ static int __init setup_early_printk(char *buf) } if (!strncmp(buf, "hsu", 3)) { - hsu_early_console_init(); + hsu_early_console_init(buf + 3); early_console_register(&early_hsu_console, keep); } #endif diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index f3f6f5344001..22d0e21b4dd7 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -625,6 +625,8 @@ work_notifysig: # deal with pending signals and movl %esp, %eax jne work_notifysig_v86 # returning to kernel-space or # vm86-space + TRACE_IRQS_ON + ENABLE_INTERRUPTS(CLBR_NONE) xorl %edx, %edx call do_notify_resume jmp resume_userspace_sig @@ -638,6 +640,8 @@ work_notifysig_v86: #else movl %esp, %eax #endif + TRACE_IRQS_ON + ENABLE_INTERRUPTS(CLBR_NONE) xorl %edx, %edx call do_notify_resume jmp resume_userspace_sig diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index faf8d5e74b0b..a20e1cb9dc87 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -221,7 +221,7 @@ ENDPROC(native_usergs_sysret64) /*CFI_REL_OFFSET ss,0*/ pushq_cfi %rax /* rsp */ CFI_REL_OFFSET rsp,0 - pushq_cfi $X86_EFLAGS_IF /* eflags - interrupts on */ + pushq_cfi $(X86_EFLAGS_IF|X86_EFLAGS_BIT1) /* eflags - interrupts on */ /*CFI_REL_OFFSET rflags,0*/ pushq_cfi $__KERNEL_CS /* cs */ /*CFI_REL_OFFSET cs,0*/ @@ -411,7 +411,7 @@ ENTRY(ret_from_fork) RESTORE_REST testl $3, CS-ARGOFFSET(%rsp) # from kernel_thread? - je int_ret_from_sys_call + jz retint_restore_args testl $_TIF_IA32, TI_flags(%rcx) # 32-bit compat task needs IRET jnz int_ret_from_sys_call @@ -465,7 +465,7 @@ ENTRY(system_call) * after the swapgs, so that it can do the swapgs * for the guest and jump here on syscall. */ -ENTRY(system_call_after_swapgs) +GLOBAL(system_call_after_swapgs) movq %rsp,PER_CPU_VAR(old_rsp) movq PER_CPU_VAR(kernel_stack),%rsp @@ -478,8 +478,7 @@ ENTRY(system_call_after_swapgs) movq %rax,ORIG_RAX-ARGOFFSET(%rsp) movq %rcx,RIP-ARGOFFSET(%rsp) CFI_REL_OFFSET rip,RIP-ARGOFFSET - GET_THREAD_INFO(%rcx) - testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%rcx) + testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jnz tracesys system_call_fastpath: cmpq $__NR_syscall_max,%rax @@ -496,10 +495,9 @@ ret_from_sys_call: /* edi: flagmask */ sysret_check: LOCKDEP_SYS_EXIT - GET_THREAD_INFO(%rcx) DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF - movl TI_flags(%rcx),%edx + movl TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET),%edx andl %edi,%edx jnz sysret_careful CFI_REMEMBER_STATE @@ -583,7 +581,7 @@ sysret_audit: /* Do syscall tracing */ tracesys: #ifdef CONFIG_AUDITSYSCALL - testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%rcx) + testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jz auditsys #endif SAVE_REST @@ -612,8 +610,6 @@ tracesys: GLOBAL(int_ret_from_sys_call) DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF - testl $3,CS-ARGOFFSET(%rsp) - je retint_restore_args movl $_TIF_ALLWORK_MASK,%edi /* edi: mask to check */ GLOBAL(int_with_check) @@ -953,6 +949,7 @@ END(common_interrupt) ENTRY(\sym) INTR_FRAME pushq_cfi $~(\num) +.Lcommon_\sym: interrupt \do_sym jmp ret_from_intr CFI_ENDPROC @@ -976,13 +973,21 @@ apicinterrupt X86_PLATFORM_IPI_VECTOR \ x86_platform_ipi smp_x86_platform_ipi #ifdef CONFIG_SMP -.irp idx,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15, \ + ALIGN + INTR_FRAME +.irp idx,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15, \ 16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 .if NUM_INVALIDATE_TLB_VECTORS > \idx -apicinterrupt (INVALIDATE_TLB_VECTOR_START)+\idx \ - invalidate_interrupt\idx smp_invalidate_interrupt +ENTRY(invalidate_interrupt\idx) + pushq_cfi $~(INVALIDATE_TLB_VECTOR_START+\idx) + jmp .Lcommon_invalidate_interrupt0 + CFI_ADJUST_CFA_OFFSET -8 +END(invalidate_interrupt\idx) .endif .endr + CFI_ENDPROC +apicinterrupt INVALIDATE_TLB_VECTOR_START, \ + invalidate_interrupt0, smp_invalidate_interrupt #endif apicinterrupt THRESHOLD_APIC_VECTOR \ diff --git a/arch/x86/kernel/head.c b/arch/x86/kernel/head.c index af0699ba48cf..48d9d4ea1020 100644 --- a/arch/x86/kernel/head.c +++ b/arch/x86/kernel/head.c @@ -52,5 +52,5 @@ void __init reserve_ebda_region(void) lowmem = 0x9f000; /* reserve all memory between lowmem and the 1MB mark */ - memblock_x86_reserve_range(lowmem, 0x100000, "* BIOS reserved"); + memblock_reserve(lowmem, 0x100000 - lowmem); } diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index 3bb08509a7a1..51ff18616d50 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -31,9 +31,8 @@ static void __init i386_default_early_setup(void) void __init i386_start_kernel(void) { - memblock_init(); - - memblock_x86_reserve_range(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS"); + memblock_reserve(__pa_symbol(&_text), + __pa_symbol(&__bss_stop) - __pa_symbol(&_text)); #ifdef CONFIG_BLK_DEV_INITRD /* Reserve INITRD */ @@ -42,7 +41,7 @@ void __init i386_start_kernel(void) u64 ramdisk_image = boot_params.hdr.ramdisk_image; u64 ramdisk_size = boot_params.hdr.ramdisk_size; u64 ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size); - memblock_x86_reserve_range(ramdisk_image, ramdisk_end, "RAMDISK"); + memblock_reserve(ramdisk_image, ramdisk_end - ramdisk_image); } #endif diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index 5655c2272adb..3a3b779f41d3 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -98,9 +98,8 @@ void __init x86_64_start_reservations(char *real_mode_data) { copy_bootdata(__va(real_mode_data)); - memblock_init(); - - memblock_x86_reserve_range(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS"); + memblock_reserve(__pa_symbol(&_text), + __pa_symbol(&__bss_stop) - __pa_symbol(&_text)); #ifdef CONFIG_BLK_DEV_INITRD /* Reserve INITRD */ @@ -109,7 +108,7 @@ void __init x86_64_start_reservations(char *real_mode_data) unsigned long ramdisk_image = boot_params.hdr.ramdisk_image; unsigned long ramdisk_size = boot_params.hdr.ramdisk_size; unsigned long ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size); - memblock_x86_reserve_range(ramdisk_image, ramdisk_end, "RAMDISK"); + memblock_reserve(ramdisk_image, ramdisk_end - ramdisk_image); } #endif diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index b946a9eac7d9..ad0de0c2714e 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -2,7 +2,6 @@ #include <linux/clockchips.h> #include <linux/interrupt.h> #include <linux/export.h> -#include <linux/sysdev.h> #include <linux/delay.h> #include <linux/errno.h> #include <linux/i8253.h> @@ -32,8 +31,6 @@ #define HPET_MIN_CYCLES 128 #define HPET_MIN_PROG_DELTA (HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1)) -#define EVT_TO_HPET_DEV(evt) container_of(evt, struct hpet_dev, evt) - /* * HPET address is set in acpi/boot.c, when an ACPI entry exists */ @@ -55,6 +52,11 @@ struct hpet_dev { char name[10]; }; +inline struct hpet_dev *EVT_TO_HPET_DEV(struct clock_event_device *evtdev) +{ + return container_of(evtdev, struct hpet_dev, evt); +} + inline unsigned int hpet_readl(unsigned int a) { return readl(hpet_virt_address + a); @@ -1049,6 +1051,14 @@ int hpet_rtc_timer_init(void) } EXPORT_SYMBOL_GPL(hpet_rtc_timer_init); +static void hpet_disable_rtc_channel(void) +{ + unsigned long cfg; + cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_ENABLE; + hpet_writel(cfg, HPET_T1_CFG); +} + /* * The functions below are called from rtc driver. * Return 0 if HPET is not being used. @@ -1060,6 +1070,9 @@ int hpet_mask_rtc_irq_bit(unsigned long bit_mask) return 0; hpet_rtc_flags &= ~bit_mask; + if (unlikely(!hpet_rtc_flags)) + hpet_disable_rtc_channel(); + return 1; } EXPORT_SYMBOL_GPL(hpet_mask_rtc_irq_bit); @@ -1125,15 +1138,11 @@ EXPORT_SYMBOL_GPL(hpet_rtc_dropped_irq); static void hpet_rtc_timer_reinit(void) { - unsigned int cfg, delta; + unsigned int delta; int lost_ints = -1; - if (unlikely(!hpet_rtc_flags)) { - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_ENABLE; - hpet_writel(cfg, HPET_T1_CFG); - return; - } + if (unlikely(!hpet_rtc_flags)) + hpet_disable_rtc_channel(); if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) delta = hpet_default_delta; diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 429e0c92924e..7943e0c21bde 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -74,6 +74,10 @@ int arch_show_interrupts(struct seq_file *p, int prec) for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->apic_irq_work_irqs); seq_printf(p, " IRQ work interrupts\n"); + seq_printf(p, "%*s: ", prec, "RTR"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stats(j)->icr_read_retry_count); + seq_printf(p, " APIC ICR read retries\n"); #endif if (x86_platform_ipi_callback) { seq_printf(p, "%*s: ", prec, "PLT"); @@ -136,6 +140,7 @@ u64 arch_irq_stat_cpu(unsigned int cpu) sum += irq_stats(cpu)->irq_spurious_count; sum += irq_stats(cpu)->apic_perf_irqs; sum += irq_stats(cpu)->apic_irq_work_irqs; + sum += irq_stats(cpu)->icr_read_retry_count; #endif if (x86_platform_ipi_callback) sum += irq_stats(cpu)->x86_platform_ipis; @@ -181,8 +186,8 @@ unsigned int __irq_entry do_IRQ(struct pt_regs *regs) unsigned vector = ~regs->orig_ax; unsigned irq; - exit_idle(); irq_enter(); + exit_idle(); irq = __this_cpu_read(vector_irq[vector]); @@ -209,10 +214,10 @@ void smp_x86_platform_ipi(struct pt_regs *regs) ack_APIC_irq(); - exit_idle(); - irq_enter(); + exit_idle(); + inc_irq_stat(x86_platform_ipis); if (x86_platform_ipi_callback) diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c index acf8fbf8fbda..69bca468c47a 100644 --- a/arch/x86/kernel/irq_64.c +++ b/arch/x86/kernel/irq_64.c @@ -38,6 +38,9 @@ static inline void stack_overflow_check(struct pt_regs *regs) #ifdef CONFIG_DEBUG_STACKOVERFLOW u64 curbase = (u64)task_stack_page(current); + if (user_mode_vm(regs)) + return; + WARN_ONCE(regs->sp >= curbase && regs->sp <= curbase + THREAD_SIZE && regs->sp < curbase + sizeof(struct thread_info) + diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index b3300e6bacef..313fb5cddbce 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -9,7 +9,7 @@ #include <linux/kprobes.h> #include <linux/init.h> #include <linux/kernel_stat.h> -#include <linux/sysdev.h> +#include <linux/device.h> #include <linux/bitops.h> #include <linux/acpi.h> #include <linux/io.h> diff --git a/arch/x86/kernel/jump_label.c b/arch/x86/kernel/jump_label.c index ea9d5f2f13ef..2889b3d43882 100644 --- a/arch/x86/kernel/jump_label.c +++ b/arch/x86/kernel/jump_label.c @@ -50,7 +50,7 @@ void arch_jump_label_transform(struct jump_entry *entry, put_online_cpus(); } -void arch_jump_label_transform_static(struct jump_entry *entry, +__init_or_module void arch_jump_label_transform_static(struct jump_entry *entry, enum jump_label_type type) { __jump_label_transform(entry, type, text_poke_early); diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c index a9c2116001d6..f0c6fd6f176b 100644 --- a/arch/x86/kernel/kvm.c +++ b/arch/x86/kernel/kvm.c @@ -39,8 +39,6 @@ #include <asm/desc.h> #include <asm/tlbflush.h> -#define MMU_QUEUE_SIZE 1024 - static int kvmapf = 1; static int parse_no_kvmapf(char *arg) @@ -60,21 +58,10 @@ static int parse_no_stealacc(char *arg) early_param("no-steal-acc", parse_no_stealacc); -struct kvm_para_state { - u8 mmu_queue[MMU_QUEUE_SIZE]; - int mmu_queue_len; -}; - -static DEFINE_PER_CPU(struct kvm_para_state, para_state); static DEFINE_PER_CPU(struct kvm_vcpu_pv_apf_data, apf_reason) __aligned(64); static DEFINE_PER_CPU(struct kvm_steal_time, steal_time) __aligned(64); static int has_steal_clock = 0; -static struct kvm_para_state *kvm_para_state(void) -{ - return &per_cpu(para_state, raw_smp_processor_id()); -} - /* * No need for any "IO delay" on KVM */ @@ -271,151 +258,6 @@ do_async_page_fault(struct pt_regs *regs, unsigned long error_code) } } -static void kvm_mmu_op(void *buffer, unsigned len) -{ - int r; - unsigned long a1, a2; - - do { - a1 = __pa(buffer); - a2 = 0; /* on i386 __pa() always returns <4G */ - r = kvm_hypercall3(KVM_HC_MMU_OP, len, a1, a2); - buffer += r; - len -= r; - } while (len); -} - -static void mmu_queue_flush(struct kvm_para_state *state) -{ - if (state->mmu_queue_len) { - kvm_mmu_op(state->mmu_queue, state->mmu_queue_len); - state->mmu_queue_len = 0; - } -} - -static void kvm_deferred_mmu_op(void *buffer, int len) -{ - struct kvm_para_state *state = kvm_para_state(); - - if (paravirt_get_lazy_mode() != PARAVIRT_LAZY_MMU) { - kvm_mmu_op(buffer, len); - return; - } - if (state->mmu_queue_len + len > sizeof state->mmu_queue) - mmu_queue_flush(state); - memcpy(state->mmu_queue + state->mmu_queue_len, buffer, len); - state->mmu_queue_len += len; -} - -static void kvm_mmu_write(void *dest, u64 val) -{ - __u64 pte_phys; - struct kvm_mmu_op_write_pte wpte; - -#ifdef CONFIG_HIGHPTE - struct page *page; - unsigned long dst = (unsigned long) dest; - - page = kmap_atomic_to_page(dest); - pte_phys = page_to_pfn(page); - pte_phys <<= PAGE_SHIFT; - pte_phys += (dst & ~(PAGE_MASK)); -#else - pte_phys = (unsigned long)__pa(dest); -#endif - wpte.header.op = KVM_MMU_OP_WRITE_PTE; - wpte.pte_val = val; - wpte.pte_phys = pte_phys; - - kvm_deferred_mmu_op(&wpte, sizeof wpte); -} - -/* - * We only need to hook operations that are MMU writes. We hook these so that - * we can use lazy MMU mode to batch these operations. We could probably - * improve the performance of the host code if we used some of the information - * here to simplify processing of batched writes. - */ -static void kvm_set_pte(pte_t *ptep, pte_t pte) -{ - kvm_mmu_write(ptep, pte_val(pte)); -} - -static void kvm_set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte) -{ - kvm_mmu_write(ptep, pte_val(pte)); -} - -static void kvm_set_pmd(pmd_t *pmdp, pmd_t pmd) -{ - kvm_mmu_write(pmdp, pmd_val(pmd)); -} - -#if PAGETABLE_LEVELS >= 3 -#ifdef CONFIG_X86_PAE -static void kvm_set_pte_atomic(pte_t *ptep, pte_t pte) -{ - kvm_mmu_write(ptep, pte_val(pte)); -} - -static void kvm_pte_clear(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - kvm_mmu_write(ptep, 0); -} - -static void kvm_pmd_clear(pmd_t *pmdp) -{ - kvm_mmu_write(pmdp, 0); -} -#endif - -static void kvm_set_pud(pud_t *pudp, pud_t pud) -{ - kvm_mmu_write(pudp, pud_val(pud)); -} - -#if PAGETABLE_LEVELS == 4 -static void kvm_set_pgd(pgd_t *pgdp, pgd_t pgd) -{ - kvm_mmu_write(pgdp, pgd_val(pgd)); -} -#endif -#endif /* PAGETABLE_LEVELS >= 3 */ - -static void kvm_flush_tlb(void) -{ - struct kvm_mmu_op_flush_tlb ftlb = { - .header.op = KVM_MMU_OP_FLUSH_TLB, - }; - - kvm_deferred_mmu_op(&ftlb, sizeof ftlb); -} - -static void kvm_release_pt(unsigned long pfn) -{ - struct kvm_mmu_op_release_pt rpt = { - .header.op = KVM_MMU_OP_RELEASE_PT, - .pt_phys = (u64)pfn << PAGE_SHIFT, - }; - - kvm_mmu_op(&rpt, sizeof rpt); -} - -static void kvm_enter_lazy_mmu(void) -{ - paravirt_enter_lazy_mmu(); -} - -static void kvm_leave_lazy_mmu(void) -{ - struct kvm_para_state *state = kvm_para_state(); - - mmu_queue_flush(state); - paravirt_leave_lazy_mmu(); -} - static void __init paravirt_ops_setup(void) { pv_info.name = "KVM"; @@ -424,29 +266,6 @@ static void __init paravirt_ops_setup(void) if (kvm_para_has_feature(KVM_FEATURE_NOP_IO_DELAY)) pv_cpu_ops.io_delay = kvm_io_delay; - if (kvm_para_has_feature(KVM_FEATURE_MMU_OP)) { - pv_mmu_ops.set_pte = kvm_set_pte; - pv_mmu_ops.set_pte_at = kvm_set_pte_at; - pv_mmu_ops.set_pmd = kvm_set_pmd; -#if PAGETABLE_LEVELS >= 3 -#ifdef CONFIG_X86_PAE - pv_mmu_ops.set_pte_atomic = kvm_set_pte_atomic; - pv_mmu_ops.pte_clear = kvm_pte_clear; - pv_mmu_ops.pmd_clear = kvm_pmd_clear; -#endif - pv_mmu_ops.set_pud = kvm_set_pud; -#if PAGETABLE_LEVELS == 4 - pv_mmu_ops.set_pgd = kvm_set_pgd; -#endif -#endif - pv_mmu_ops.flush_tlb_user = kvm_flush_tlb; - pv_mmu_ops.release_pte = kvm_release_pt; - pv_mmu_ops.release_pmd = kvm_release_pt; - pv_mmu_ops.release_pud = kvm_release_pt; - - pv_mmu_ops.lazy_mode.enter = kvm_enter_lazy_mmu; - pv_mmu_ops.lazy_mode.leave = kvm_leave_lazy_mmu; - } #ifdef CONFIG_X86_IO_APIC no_timer_check = 1; #endif diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index d494799aafcd..fe86493f3ed1 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -1,14 +1,18 @@ /* * AMD CPU Microcode Update Driver for Linux - * Copyright (C) 2008 Advanced Micro Devices Inc. + * Copyright (C) 2008-2011 Advanced Micro Devices Inc. * * Author: Peter Oruba <peter.oruba@amd.com> * * Based on work by: * Tigran Aivazian <tigran@aivazian.fsnet.co.uk> * - * This driver allows to upgrade microcode on AMD - * family 0x10 and 0x11 processors. + * Maintainers: + * Andreas Herrmann <andreas.herrmann3@amd.com> + * Borislav Petkov <borislav.petkov@amd.com> + * + * This driver allows to upgrade microcode on F10h AMD + * CPUs and later. * * Licensed under the terms of the GNU General Public * License version 2. See file COPYING for details. @@ -71,6 +75,9 @@ struct microcode_amd { static struct equiv_cpu_entry *equiv_cpu_table; +/* page-sized ucode patch buffer */ +void *patch; + static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) { struct cpuinfo_x86 *c = &cpu_data(cpu); @@ -86,27 +93,76 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) return 0; } -static int get_matching_microcode(int cpu, struct microcode_header_amd *mc_hdr, - int rev) +static unsigned int verify_ucode_size(int cpu, u32 patch_size, + unsigned int size) { - unsigned int current_cpu_id; - u16 equiv_cpu_id = 0; - unsigned int i = 0; + struct cpuinfo_x86 *c = &cpu_data(cpu); + u32 max_size; + +#define F1XH_MPB_MAX_SIZE 2048 +#define F14H_MPB_MAX_SIZE 1824 +#define F15H_MPB_MAX_SIZE 4096 + + switch (c->x86) { + case 0x14: + max_size = F14H_MPB_MAX_SIZE; + break; + case 0x15: + max_size = F15H_MPB_MAX_SIZE; + break; + default: + max_size = F1XH_MPB_MAX_SIZE; + break; + } + + if (patch_size > min_t(u32, size, max_size)) { + pr_err("patch size mismatch\n"); + return 0; + } + + return patch_size; +} + +static u16 find_equiv_id(void) +{ + unsigned int current_cpu_id, i = 0; BUG_ON(equiv_cpu_table == NULL); + current_cpu_id = cpuid_eax(0x00000001); while (equiv_cpu_table[i].installed_cpu != 0) { - if (current_cpu_id == equiv_cpu_table[i].installed_cpu) { - equiv_cpu_id = equiv_cpu_table[i].equiv_cpu; - break; - } + if (current_cpu_id == equiv_cpu_table[i].installed_cpu) + return equiv_cpu_table[i].equiv_cpu; + i++; } + return 0; +} +/* + * we signal a good patch is found by returning its size > 0 + */ +static int get_matching_microcode(int cpu, const u8 *ucode_ptr, + unsigned int leftover_size, int rev, + unsigned int *current_size) +{ + struct microcode_header_amd *mc_hdr; + unsigned int actual_size; + u16 equiv_cpu_id; + + /* size of the current patch we're staring at */ + *current_size = *(u32 *)(ucode_ptr + 4) + SECTION_HDR_SIZE; + + equiv_cpu_id = find_equiv_id(); if (!equiv_cpu_id) return 0; + /* + * let's look at the patch header itself now + */ + mc_hdr = (struct microcode_header_amd *)(ucode_ptr + SECTION_HDR_SIZE); + if (mc_hdr->processor_rev_id != equiv_cpu_id) return 0; @@ -120,7 +176,20 @@ static int get_matching_microcode(int cpu, struct microcode_header_amd *mc_hdr, if (mc_hdr->patch_id <= rev) return 0; - return 1; + /* + * now that the header looks sane, verify its size + */ + actual_size = verify_ucode_size(cpu, *current_size, leftover_size); + if (!actual_size) + return 0; + + /* clear the patch buffer */ + memset(patch, 0, PAGE_SIZE); + + /* all looks ok, get the binary patch */ + get_ucode_data(patch, ucode_ptr + SECTION_HDR_SIZE, actual_size); + + return actual_size; } static int apply_microcode_amd(int cpu) @@ -155,63 +224,6 @@ static int apply_microcode_amd(int cpu) return 0; } -static unsigned int verify_ucode_size(int cpu, const u8 *buf, unsigned int size) -{ - struct cpuinfo_x86 *c = &cpu_data(cpu); - u32 max_size, actual_size; - -#define F1XH_MPB_MAX_SIZE 2048 -#define F14H_MPB_MAX_SIZE 1824 -#define F15H_MPB_MAX_SIZE 4096 - - switch (c->x86) { - case 0x14: - max_size = F14H_MPB_MAX_SIZE; - break; - case 0x15: - max_size = F15H_MPB_MAX_SIZE; - break; - default: - max_size = F1XH_MPB_MAX_SIZE; - break; - } - - actual_size = *(u32 *)(buf + 4); - - if (actual_size + SECTION_HDR_SIZE > size || actual_size > max_size) { - pr_err("section size mismatch\n"); - return 0; - } - - return actual_size; -} - -static struct microcode_header_amd * -get_next_ucode(int cpu, const u8 *buf, unsigned int size, unsigned int *mc_size) -{ - struct microcode_header_amd *mc = NULL; - unsigned int actual_size = 0; - - if (*(u32 *)buf != UCODE_UCODE_TYPE) { - pr_err("invalid type field in container file section header\n"); - goto out; - } - - actual_size = verify_ucode_size(cpu, buf, size); - if (!actual_size) - goto out; - - mc = vzalloc(actual_size); - if (!mc) - goto out; - - get_ucode_data(mc, buf + SECTION_HDR_SIZE, actual_size); - *mc_size = actual_size + SECTION_HDR_SIZE; - -out: - return mc; -} - static int install_equiv_cpu_table(const u8 *buf) { unsigned int *ibuf = (unsigned int *)buf; @@ -247,36 +259,38 @@ generic_load_microcode(int cpu, const u8 *data, size_t size) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu; struct microcode_header_amd *mc_hdr = NULL; - unsigned int mc_size, leftover; + unsigned int mc_size, leftover, current_size = 0; int offset; const u8 *ucode_ptr = data; void *new_mc = NULL; unsigned int new_rev = uci->cpu_sig.rev; - enum ucode_state state = UCODE_OK; + enum ucode_state state = UCODE_ERROR; offset = install_equiv_cpu_table(ucode_ptr); if (offset < 0) { pr_err("failed to create equivalent cpu table\n"); - return UCODE_ERROR; + goto out; } - ucode_ptr += offset; leftover = size - offset; - while (leftover) { - mc_hdr = get_next_ucode(cpu, ucode_ptr, leftover, &mc_size); - if (!mc_hdr) - break; + if (*(u32 *)ucode_ptr != UCODE_UCODE_TYPE) { + pr_err("invalid type field in container file section header\n"); + goto free_table; + } - if (get_matching_microcode(cpu, mc_hdr, new_rev)) { - vfree(new_mc); + while (leftover) { + mc_size = get_matching_microcode(cpu, ucode_ptr, leftover, + new_rev, ¤t_size); + if (mc_size) { + mc_hdr = patch; + new_mc = patch; new_rev = mc_hdr->patch_id; - new_mc = mc_hdr; - } else - vfree(mc_hdr); + goto out_ok; + } - ucode_ptr += mc_size; - leftover -= mc_size; + ucode_ptr += current_size; + leftover -= current_size; } if (!new_mc) { @@ -284,19 +298,16 @@ generic_load_microcode(int cpu, const u8 *data, size_t size) goto free_table; } - if (!leftover) { - vfree(uci->mc); - uci->mc = new_mc; - pr_debug("CPU%d update ucode (0x%08x -> 0x%08x)\n", - cpu, uci->cpu_sig.rev, new_rev); - } else { - vfree(new_mc); - state = UCODE_ERROR; - } +out_ok: + uci->mc = new_mc; + state = UCODE_OK; + pr_debug("CPU%d update ucode (0x%08x -> 0x%08x)\n", + cpu, uci->cpu_sig.rev, new_rev); free_table: free_equiv_cpu_table(); +out: return state; } @@ -337,7 +348,6 @@ static void microcode_fini_cpu_amd(int cpu) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - vfree(uci->mc); uci->mc = NULL; } @@ -351,5 +361,14 @@ static struct microcode_ops microcode_amd_ops = { struct microcode_ops * __init init_amd_microcode(void) { + patch = (void *)get_zeroed_page(GFP_KERNEL); + if (!patch) + return NULL; + return µcode_amd_ops; } + +void __exit exit_amd_microcode(void) +{ + free_page((unsigned long)patch); +} diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index f2d2a664e797..fda91c307104 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -256,7 +256,7 @@ static int __init microcode_dev_init(void) return 0; } -static void microcode_dev_exit(void) +static void __exit microcode_dev_exit(void) { misc_deregister(µcode_dev); } @@ -292,8 +292,8 @@ static int reload_for_cpu(int cpu) return err; } -static ssize_t reload_store(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t reload_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) { unsigned long val; @@ -318,30 +318,30 @@ static ssize_t reload_store(struct sys_device *dev, return ret; } -static ssize_t version_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t version_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; return sprintf(buf, "0x%x\n", uci->cpu_sig.rev); } -static ssize_t pf_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +static ssize_t pf_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; return sprintf(buf, "0x%x\n", uci->cpu_sig.pf); } -static SYSDEV_ATTR(reload, 0200, NULL, reload_store); -static SYSDEV_ATTR(version, 0400, version_show, NULL); -static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL); +static DEVICE_ATTR(reload, 0200, NULL, reload_store); +static DEVICE_ATTR(version, 0400, version_show, NULL); +static DEVICE_ATTR(processor_flags, 0400, pf_show, NULL); static struct attribute *mc_default_attrs[] = { - &attr_reload.attr, - &attr_version.attr, - &attr_processor_flags.attr, + &dev_attr_reload.attr, + &dev_attr_version.attr, + &dev_attr_processor_flags.attr, NULL }; @@ -405,43 +405,45 @@ static enum ucode_state microcode_update_cpu(int cpu) return ustate; } -static int mc_sysdev_add(struct sys_device *sys_dev) +static int mc_device_add(struct device *dev, struct subsys_interface *sif) { - int err, cpu = sys_dev->id; + int err, cpu = dev->id; if (!cpu_online(cpu)) return 0; pr_debug("CPU%d added\n", cpu); - err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group); + err = sysfs_create_group(&dev->kobj, &mc_attr_group); if (err) return err; if (microcode_init_cpu(cpu) == UCODE_ERROR) { - sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); + sysfs_remove_group(&dev->kobj, &mc_attr_group); return -EINVAL; } return err; } -static int mc_sysdev_remove(struct sys_device *sys_dev) +static int mc_device_remove(struct device *dev, struct subsys_interface *sif) { - int cpu = sys_dev->id; + int cpu = dev->id; if (!cpu_online(cpu)) return 0; pr_debug("CPU%d removed\n", cpu); microcode_fini_cpu(cpu); - sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); + sysfs_remove_group(&dev->kobj, &mc_attr_group); return 0; } -static struct sysdev_driver mc_sysdev_driver = { - .add = mc_sysdev_add, - .remove = mc_sysdev_remove, +static struct subsys_interface mc_cpu_interface = { + .name = "microcode", + .subsys = &cpu_subsys, + .add_dev = mc_device_add, + .remove_dev = mc_device_remove, }; /** @@ -464,9 +466,9 @@ static __cpuinit int mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; - struct sys_device *sys_dev; + struct device *dev; - sys_dev = get_cpu_sysdev(cpu); + dev = get_cpu_device(cpu); switch (action) { case CPU_ONLINE: case CPU_ONLINE_FROZEN: @@ -474,13 +476,13 @@ mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu) case CPU_DOWN_FAILED: case CPU_DOWN_FAILED_FROZEN: pr_debug("CPU%d added\n", cpu); - if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group)) + if (sysfs_create_group(&dev->kobj, &mc_attr_group)) pr_err("Failed to create group for CPU%d\n", cpu); break; case CPU_DOWN_PREPARE: case CPU_DOWN_PREPARE_FROZEN: /* Suspend is in progress, only remove the interface */ - sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); + sysfs_remove_group(&dev->kobj, &mc_attr_group); pr_debug("CPU%d removed\n", cpu); break; @@ -519,27 +521,23 @@ static int __init microcode_init(void) microcode_pdev = platform_device_register_simple("microcode", -1, NULL, 0); - if (IS_ERR(microcode_pdev)) { - microcode_dev_exit(); + if (IS_ERR(microcode_pdev)) return PTR_ERR(microcode_pdev); - } get_online_cpus(); mutex_lock(µcode_mutex); - error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver); + error = subsys_interface_register(&mc_cpu_interface); mutex_unlock(µcode_mutex); put_online_cpus(); - if (error) { - platform_device_unregister(microcode_pdev); - return error; - } + if (error) + goto out_pdev; error = microcode_dev_init(); if (error) - return error; + goto out_driver; register_syscore_ops(&mc_syscore_ops); register_hotcpu_notifier(&mc_cpu_notifier); @@ -548,11 +546,27 @@ static int __init microcode_init(void) " <tigran@aivazian.fsnet.co.uk>, Peter Oruba\n"); return 0; + +out_driver: + get_online_cpus(); + mutex_lock(µcode_mutex); + + subsys_interface_unregister(&mc_cpu_interface); + + mutex_unlock(µcode_mutex); + put_online_cpus(); + +out_pdev: + platform_device_unregister(microcode_pdev); + return error; + } module_init(microcode_init); static void __exit microcode_exit(void) { + struct cpuinfo_x86 *c = &cpu_data(0); + microcode_dev_exit(); unregister_hotcpu_notifier(&mc_cpu_notifier); @@ -561,7 +575,7 @@ static void __exit microcode_exit(void) get_online_cpus(); mutex_lock(µcode_mutex); - sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver); + subsys_interface_unregister(&mc_cpu_interface); mutex_unlock(µcode_mutex); put_online_cpus(); @@ -570,6 +584,9 @@ static void __exit microcode_exit(void) microcode_ops = NULL; + if (c->x86_vendor == X86_VENDOR_AMD) + exit_amd_microcode(); + pr_info("Microcode Update Driver: v" MICROCODE_VERSION " removed.\n"); } module_exit(microcode_exit); diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 9103b89c145a..ca470e4c92dc 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -95,8 +95,8 @@ static void __init MP_bus_info(struct mpc_bus *m) } #endif + set_bit(m->busid, mp_bus_not_pci); if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) { - set_bit(m->busid, mp_bus_not_pci); #if defined(CONFIG_EISA) || defined(CONFIG_MCA) mp_bus_id_to_type[m->busid] = MP_BUS_ISA; #endif @@ -564,9 +564,7 @@ void __init default_get_smp_config(unsigned int early) static void __init smp_reserve_memory(struct mpf_intel *mpf) { - unsigned long size = get_mpc_size(mpf->physptr); - - memblock_x86_reserve_range(mpf->physptr, mpf->physptr+size, "* MP-table mpc"); + memblock_reserve(mpf->physptr, get_mpc_size(mpf->physptr)); } static int __init smp_scan_config(unsigned long base, unsigned long length) @@ -595,7 +593,7 @@ static int __init smp_scan_config(unsigned long base, unsigned long length) mpf, (u64)virt_to_phys(mpf)); mem = virt_to_phys(mpf); - memblock_x86_reserve_range(mem, mem + sizeof(*mpf), "* MP-table mpf"); + memblock_reserve(mem, sizeof(*mpf)); if (mpf->physptr) smp_reserve_memory(mpf); @@ -836,10 +834,8 @@ early_param("alloc_mptable", parse_alloc_mptable_opt); void __init early_reserve_e820_mpc_new(void) { - if (enable_update_mptable && alloc_mptable) { - u64 startt = 0; - mpc_new_phys = early_reserve_e820(startt, mpc_new_length, 4); - } + if (enable_update_mptable && alloc_mptable) + mpc_new_phys = early_reserve_e820(mpc_new_length, 4); } static int __init update_mp_table(void) diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c index 12fcbe2c143e..96356762a51d 100644 --- a/arch/x86/kernel/msr.c +++ b/arch/x86/kernel/msr.c @@ -236,7 +236,7 @@ static struct notifier_block __refdata msr_class_cpu_notifier = { .notifier_call = msr_class_cpu_callback, }; -static char *msr_devnode(struct device *dev, mode_t *mode) +static char *msr_devnode(struct device *dev, umode_t *mode) { return kasprintf(GFP_KERNEL, "cpu/%u/msr", MINOR(dev->devt)); } diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 80dc793b3f63..1c4d769e21ea 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -45,6 +45,15 @@ int iommu_detected __read_mostly = 0; */ int iommu_pass_through __read_mostly; +/* + * Group multi-function PCI devices into a single device-group for the + * iommu_device_group interface. This tells the iommu driver to pretend + * it cannot distinguish between functions of a device, exposing only one + * group for the device. Useful for disallowing use of individual PCI + * functions from userspace drivers. + */ +int iommu_group_mf __read_mostly; + extern struct iommu_table_entry __iommu_table[], __iommu_table_end[]; /* Dummy device used for NULL arguments (normally ISA). */ @@ -169,6 +178,8 @@ static __init int iommu_setup(char *p) #endif if (!strncmp(p, "pt", 2)) iommu_pass_through = 1; + if (!strncmp(p, "group_mf", 8)) + iommu_group_mf = 1; gart_parse_options(p); diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index b9b3b1a51643..15763af7bfe3 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -293,7 +293,7 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) regs.orig_ax = -1; regs.ip = (unsigned long) kernel_thread_helper; regs.cs = __KERNEL_CS | get_kernel_rpl(); - regs.flags = X86_EFLAGS_IF | 0x2; + regs.flags = X86_EFLAGS_IF | X86_EFLAGS_BIT1; /* Ok, create the new process.. */ return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); @@ -403,6 +403,14 @@ void default_idle(void) EXPORT_SYMBOL(default_idle); #endif +bool set_pm_idle_to_default(void) +{ + bool ret = !!pm_idle; + + pm_idle = default_idle; + + return ret; +} void stop_this_cpu(void *dummy) { local_irq_disable(); diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 795b79f984c2..485204f58cda 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -99,7 +99,8 @@ void cpu_idle(void) /* endless idle loop with no priority at all */ while (1) { - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); + rcu_idle_enter(); while (!need_resched()) { check_pgt_cache(); @@ -116,7 +117,8 @@ void cpu_idle(void) pm_idle(); start_critical_timings(); } - tick_nohz_restart_sched_tick(); + rcu_idle_exit(); + tick_nohz_idle_exit(); preempt_enable_no_resched(); schedule(); preempt_disable(); diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 3bd7e6eebf31..9b9fe4a85c87 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -122,7 +122,7 @@ void cpu_idle(void) /* endless idle loop with no priority at all */ while (1) { - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); while (!need_resched()) { rmb(); @@ -139,8 +139,14 @@ void cpu_idle(void) enter_idle(); /* Don't trace irqs off for idle */ stop_critical_timings(); + + /* enter_idle() needs rcu for notifiers */ + rcu_idle_enter(); + if (cpuidle_idle_call()) pm_idle(); + + rcu_idle_exit(); start_critical_timings(); /* In many cases the interrupt that ended idle @@ -149,7 +155,7 @@ void cpu_idle(void) __exit_idle(); } - tick_nohz_restart_sched_tick(); + tick_nohz_idle_exit(); preempt_enable_no_resched(); schedule(); preempt_disable(); @@ -293,13 +299,12 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps)); if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) { - p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL); + p->thread.io_bitmap_ptr = kmemdup(me->thread.io_bitmap_ptr, + IO_BITMAP_BYTES, GFP_KERNEL); if (!p->thread.io_bitmap_ptr) { p->thread.io_bitmap_max = 0; return -ENOMEM; } - memcpy(p->thread.io_bitmap_ptr, me->thread.io_bitmap_ptr, - IO_BITMAP_BYTES); set_tsk_thread_flag(p, TIF_IO_BITMAP); } diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 82528799c5de..89a04c7b5bb6 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -749,7 +749,8 @@ put: /* * Handle PTRACE_POKEUSR calls for the debug register area. */ -int ptrace_set_debugreg(struct task_struct *tsk, int n, unsigned long val) +static int ptrace_set_debugreg(struct task_struct *tsk, int n, + unsigned long val) { struct thread_struct *thread = &(tsk->thread); int rc = 0; diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index b78643d0f9a5..03920a15a632 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -553,4 +553,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC, quirk_amd_nb_node); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_LINK, quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F0, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F1, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F2, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F5, + quirk_amd_nb_node); + #endif diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index e334be1182b9..37a458b521a6 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -124,7 +124,7 @@ __setup("reboot=", reboot_setup); */ /* - * Some machines require the "reboot=b" commandline option, + * Some machines require the "reboot=b" or "reboot=k" commandline options, * this quirk makes that automatic. */ static int __init set_bios_reboot(const struct dmi_system_id *d) @@ -136,6 +136,15 @@ static int __init set_bios_reboot(const struct dmi_system_id *d) return 0; } +static int __init set_kbd_reboot(const struct dmi_system_id *d) +{ + if (reboot_type != BOOT_KBD) { + reboot_type = BOOT_KBD; + printk(KERN_INFO "%s series board detected. Selecting KBD-method for reboot.\n", d->ident); + } + return 0; +} + static struct dmi_system_id __initdata reboot_dmi_table[] = { { /* Handle problems with rebooting on Dell E520's */ .callback = set_bios_reboot, @@ -295,7 +304,7 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { }, }, { /* Handle reboot issue on Acer Aspire one */ - .callback = set_bios_reboot, + .callback = set_kbd_reboot, .ident = "Acer Aspire One A110", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), @@ -443,6 +452,14 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6420"), }, }, + { /* Handle problems with rebooting on the OptiPlex 990. */ + .callback = set_pci_reboot, + .ident = "Dell OptiPlex 990", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"), + }, + }, { } }; diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c index 348ce016a835..af6db6ec5b2a 100644 --- a/arch/x86/kernel/rtc.c +++ b/arch/x86/kernel/rtc.c @@ -12,6 +12,7 @@ #include <asm/vsyscall.h> #include <asm/x86_init.h> #include <asm/time.h> +#include <asm/mrst.h> #ifdef CONFIG_X86_32 /* @@ -242,6 +243,10 @@ static __init int add_rtc_cmos(void) if (of_have_populated_dt()) return 0; + /* Intel MID platforms don't have ioport rtc */ + if (mrst_identify_cpu()) + return -ENODEV; + platform_device_register(&rtc_device); dev_info(&rtc_device.dev, "registered platform RTC device (no PNP device found)\n"); diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index cf0ef986cb6d..d05444ac2aea 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -306,7 +306,8 @@ static void __init cleanup_highmap(void) static void __init reserve_brk(void) { if (_brk_end > _brk_start) - memblock_x86_reserve_range(__pa(_brk_start), __pa(_brk_end), "BRK"); + memblock_reserve(__pa(_brk_start), + __pa(_brk_end) - __pa(_brk_start)); /* Mark brk area as locked down and no longer taking any new allocations */ @@ -331,13 +332,13 @@ static void __init relocate_initrd(void) ramdisk_here = memblock_find_in_range(0, end_of_lowmem, area_size, PAGE_SIZE); - if (ramdisk_here == MEMBLOCK_ERROR) + if (!ramdisk_here) panic("Cannot find place for new RAMDISK of size %lld\n", ramdisk_size); /* Note: this includes all the lowmem currently occupied by the initrd, we rely on that fact to keep the data intact. */ - memblock_x86_reserve_range(ramdisk_here, ramdisk_here + area_size, "NEW RAMDISK"); + memblock_reserve(ramdisk_here, area_size); initrd_start = ramdisk_here + PAGE_OFFSET; initrd_end = initrd_start + ramdisk_size; printk(KERN_INFO "Allocated new RAMDISK: %08llx - %08llx\n", @@ -393,7 +394,7 @@ static void __init reserve_initrd(void) initrd_start = 0; if (ramdisk_size >= (end_of_lowmem>>1)) { - memblock_x86_free_range(ramdisk_image, ramdisk_end); + memblock_free(ramdisk_image, ramdisk_end - ramdisk_image); printk(KERN_ERR "initrd too large to handle, " "disabling initrd\n"); return; @@ -416,7 +417,7 @@ static void __init reserve_initrd(void) relocate_initrd(); - memblock_x86_free_range(ramdisk_image, ramdisk_end); + memblock_free(ramdisk_image, ramdisk_end - ramdisk_image); } #else static void __init reserve_initrd(void) @@ -490,15 +491,13 @@ static void __init memblock_x86_reserve_range_setup_data(void) { struct setup_data *data; u64 pa_data; - char buf[32]; if (boot_params.hdr.version < 0x0209) return; pa_data = boot_params.hdr.setup_data; while (pa_data) { data = early_memremap(pa_data, sizeof(*data)); - sprintf(buf, "setup data %x", data->type); - memblock_x86_reserve_range(pa_data, pa_data+sizeof(*data)+data->len, buf); + memblock_reserve(pa_data, sizeof(*data) + data->len); pa_data = data->next; early_iounmap(data, sizeof(*data)); } @@ -554,7 +553,7 @@ static void __init reserve_crashkernel(void) crash_base = memblock_find_in_range(alignment, CRASH_KERNEL_ADDR_MAX, crash_size, alignment); - if (crash_base == MEMBLOCK_ERROR) { + if (!crash_base) { pr_info("crashkernel reservation failed - No suitable area found.\n"); return; } @@ -568,7 +567,7 @@ static void __init reserve_crashkernel(void) return; } } - memblock_x86_reserve_range(crash_base, crash_base + crash_size, "CRASH KERNEL"); + memblock_reserve(crash_base, crash_size); printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " "for crashkernel (System RAM: %ldMB)\n", @@ -626,7 +625,7 @@ static __init void reserve_ibft_region(void) addr = find_ibft_region(&size); if (size) - memblock_x86_reserve_range(addr, addr + size, "* ibft"); + memblock_reserve(addr, size); } static unsigned reserve_low = CONFIG_X86_RESERVE_LOW << 10; diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c index 54ddaeb221c1..46a01bdc27e2 100644 --- a/arch/x86/kernel/signal.c +++ b/arch/x86/kernel/signal.c @@ -682,7 +682,6 @@ static int handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, struct pt_regs *regs) { - sigset_t blocked; int ret; /* Are we from a system call? */ @@ -733,10 +732,7 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, */ regs->flags &= ~X86_EFLAGS_TF; - sigorsets(&blocked, ¤t->blocked, &ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(&blocked, sig); - set_current_blocked(&blocked); + block_sigmask(ka, sig); tracehook_signal_handler(sig, info, ka, regs, test_thread_flag(TIF_SINGLESTEP)); diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 9f548cb4a958..e38e21754eea 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -840,7 +840,8 @@ int __cpuinit native_cpu_up(unsigned int cpu) pr_debug("++++++++++++++++++++=_---CPU UP %u\n", cpu); if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid || - !physid_isset(apicid, phys_cpu_present_map)) { + !physid_isset(apicid, phys_cpu_present_map) || + (!x2apic_mode && apicid >= 255)) { printk(KERN_ERR "%s: bad cpu %d\n", __func__, cpu); return -EINVAL; } diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c index a91ae7709b49..a73b61055ad6 100644 --- a/arch/x86/kernel/trampoline.c +++ b/arch/x86/kernel/trampoline.c @@ -14,11 +14,11 @@ void __init setup_trampolines(void) /* Has to be in very low memory so we can execute real-mode AP code. */ mem = memblock_find_in_range(0, 1<<20, size, PAGE_SIZE); - if (mem == MEMBLOCK_ERROR) + if (!mem) panic("Cannot allocate trampoline\n"); x86_trampoline_base = __va(mem); - memblock_x86_reserve_range(mem, mem + size, "TRAMPOLINE"); + memblock_reserve(mem, size); printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n", x86_trampoline_base, (unsigned long long)mem, size); diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index a8e3eb83466c..fa1191fb679d 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -306,15 +306,10 @@ dotraplinkage void __kprobes do_int3(struct pt_regs *regs, long error_code) == NOTIFY_STOP) return; #endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */ -#ifdef CONFIG_KPROBES + if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) == NOTIFY_STOP) return; -#else - if (notify_die(DIE_TRAP, "int3", regs, error_code, 3, SIGTRAP) - == NOTIFY_STOP) - return; -#endif preempt_conditional_sti(regs); do_trap(3, SIGTRAP, "int3", regs, error_code, NULL); diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index db483369f10b..2c9cf0fd78f5 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -35,7 +35,7 @@ static int __read_mostly tsc_unstable; erroneous rdtsc usage on !cpu_has_tsc processors */ static int __read_mostly tsc_disabled = -1; -static int tsc_clocksource_reliable; +int tsc_clocksource_reliable; /* * Scheduler clock - returns current time in nanosec units. */ @@ -178,11 +178,11 @@ static unsigned long calc_pmtimer_ref(u64 deltatsc, u64 pm1, u64 pm2) } #define CAL_MS 10 -#define CAL_LATCH (CLOCK_TICK_RATE / (1000 / CAL_MS)) +#define CAL_LATCH (PIT_TICK_RATE / (1000 / CAL_MS)) #define CAL_PIT_LOOPS 1000 #define CAL2_MS 50 -#define CAL2_LATCH (CLOCK_TICK_RATE / (1000 / CAL2_MS)) +#define CAL2_LATCH (PIT_TICK_RATE / (1000 / CAL2_MS)) #define CAL2_PIT_LOOPS 5000 diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c index 0aa5fed8b9e6..9eba29b46cb7 100644 --- a/arch/x86/kernel/tsc_sync.c +++ b/arch/x86/kernel/tsc_sync.c @@ -113,7 +113,7 @@ void __cpuinit check_tsc_sync_source(int cpu) if (unsynchronized_tsc()) return; - if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE)) { + if (tsc_clocksource_reliable) { if (cpu == (nr_cpu_ids-1) || system_state != SYSTEM_BOOTING) pr_info( "Skipped synchronization checks as TSC is reliable.\n"); @@ -172,7 +172,7 @@ void __cpuinit check_tsc_sync_target(void) { int cpus = 2; - if (unsynchronized_tsc() || boot_cpu_has(X86_FEATURE_TSC_RELIABLE)) + if (unsynchronized_tsc() || tsc_clocksource_reliable) return; /* diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index e4d4a22e8b94..b07ba9393564 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -57,7 +57,7 @@ DEFINE_VVAR(struct vsyscall_gtod_data, vsyscall_gtod_data) = .lock = __SEQLOCK_UNLOCKED(__vsyscall_gtod_data.lock), }; -static enum { EMULATE, NATIVE, NONE } vsyscall_mode = NATIVE; +static enum { EMULATE, NATIVE, NONE } vsyscall_mode = EMULATE; static int __init vsyscall_setup(char *str) { @@ -140,11 +140,40 @@ static int addr_to_vsyscall_nr(unsigned long addr) return nr; } +static bool write_ok_or_segv(unsigned long ptr, size_t size) +{ + /* + * XXX: if access_ok, get_user, and put_user handled + * sig_on_uaccess_error, this could go away. + */ + + if (!access_ok(VERIFY_WRITE, (void __user *)ptr, size)) { + siginfo_t info; + struct thread_struct *thread = ¤t->thread; + + thread->error_code = 6; /* user fault, no page, write */ + thread->cr2 = ptr; + thread->trap_no = 14; + + memset(&info, 0, sizeof(info)); + info.si_signo = SIGSEGV; + info.si_errno = 0; + info.si_code = SEGV_MAPERR; + info.si_addr = (void __user *)ptr; + + force_sig_info(SIGSEGV, &info, current); + return false; + } else { + return true; + } +} + bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) { struct task_struct *tsk; unsigned long caller; int vsyscall_nr; + int prev_sig_on_uaccess_error; long ret; /* @@ -180,35 +209,65 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) if (seccomp_mode(&tsk->seccomp)) do_exit(SIGKILL); + /* + * With a real vsyscall, page faults cause SIGSEGV. We want to + * preserve that behavior to make writing exploits harder. + */ + prev_sig_on_uaccess_error = current_thread_info()->sig_on_uaccess_error; + current_thread_info()->sig_on_uaccess_error = 1; + + /* + * 0 is a valid user pointer (in the access_ok sense) on 32-bit and + * 64-bit, so we don't need to special-case it here. For all the + * vsyscalls, 0 means "don't write anything" not "write it at + * address 0". + */ + ret = -EFAULT; switch (vsyscall_nr) { case 0: + if (!write_ok_or_segv(regs->di, sizeof(struct timeval)) || + !write_ok_or_segv(regs->si, sizeof(struct timezone))) + break; + ret = sys_gettimeofday( (struct timeval __user *)regs->di, (struct timezone __user *)regs->si); break; case 1: + if (!write_ok_or_segv(regs->di, sizeof(time_t))) + break; + ret = sys_time((time_t __user *)regs->di); break; case 2: + if (!write_ok_or_segv(regs->di, sizeof(unsigned)) || + !write_ok_or_segv(regs->si, sizeof(unsigned))) + break; + ret = sys_getcpu((unsigned __user *)regs->di, (unsigned __user *)regs->si, 0); break; } + current_thread_info()->sig_on_uaccess_error = prev_sig_on_uaccess_error; + if (ret == -EFAULT) { - /* - * Bad news -- userspace fed a bad pointer to a vsyscall. - * - * With a real vsyscall, that would have caused SIGSEGV. - * To make writing reliable exploits using the emulated - * vsyscalls harder, generate SIGSEGV here as well. - */ + /* Bad news -- userspace fed a bad pointer to a vsyscall. */ warn_bad_vsyscall(KERN_INFO, regs, "vsyscall fault (exploit attempt?)"); - goto sigsegv; + + /* + * If we failed to generate a signal for any reason, + * generate one here. (This should be impossible.) + */ + if (WARN_ON_ONCE(!sigismember(&tsk->pending.signal, SIGBUS) && + !sigismember(&tsk->pending.signal, SIGSEGV))) + goto sigsegv; + + return true; /* Don't emulate the ret. */ } regs->ax = ret; diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index c1d6cd549397..947a06ccc673 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -92,6 +92,7 @@ struct x86_init_ops x86_init __initdata = { struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = { .setup_percpu_clockev = setup_secondary_APIC_clock, + .fixup_cpu_id = x86_default_fixup_cpu_id, }; static void default_nmi_init(void) { }; @@ -114,4 +115,5 @@ struct x86_msi_ops x86_msi = { .setup_msi_irqs = native_setup_msi_irqs, .teardown_msi_irq = native_teardown_msi_irq, .teardown_msi_irqs = default_teardown_msi_irqs, + .restore_msi_irqs = default_restore_msi_irqs, }; diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig index ff5790d8e990..1a7fe868f375 100644 --- a/arch/x86/kvm/Kconfig +++ b/arch/x86/kvm/Kconfig @@ -35,6 +35,7 @@ config KVM select KVM_MMIO select TASKSTATS select TASK_DELAY_ACCT + select PERF_EVENTS ---help--- Support hosting fully virtualized guest machines using hardware virtualization extensions. You will need a fairly recent @@ -52,6 +53,8 @@ config KVM config KVM_INTEL tristate "KVM for Intel processors support" depends on KVM + # for perf_guest_get_msrs(): + depends on CPU_SUP_INTEL ---help--- Provides support for KVM on Intel processors equipped with the VT extensions. diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile index f15501f431c8..4f579e8dcacf 100644 --- a/arch/x86/kvm/Makefile +++ b/arch/x86/kvm/Makefile @@ -12,7 +12,7 @@ kvm-$(CONFIG_IOMMU_API) += $(addprefix ../../../virt/kvm/, iommu.o) kvm-$(CONFIG_KVM_ASYNC_PF) += $(addprefix ../../../virt/kvm/, async_pf.o) kvm-y += x86.o mmu.o emulate.o i8259.o irq.o lapic.o \ - i8254.o timer.o + i8254.o timer.o cpuid.o pmu.o kvm-intel-y += vmx.o kvm-amd-y += svm.o diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c new file mode 100644 index 000000000000..89b02bfaaca5 --- /dev/null +++ b/arch/x86/kvm/cpuid.c @@ -0,0 +1,670 @@ +/* + * Kernel-based Virtual Machine driver for Linux + * cpuid support routines + * + * derived from arch/x86/kvm/x86.c + * + * Copyright 2011 Red Hat, Inc. and/or its affiliates. + * Copyright IBM Corporation, 2008 + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + * + */ + +#include <linux/kvm_host.h> +#include <linux/module.h> +#include <linux/vmalloc.h> +#include <linux/uaccess.h> +#include <asm/user.h> +#include <asm/xsave.h> +#include "cpuid.h" +#include "lapic.h" +#include "mmu.h" +#include "trace.h" + +void kvm_update_cpuid(struct kvm_vcpu *vcpu) +{ + struct kvm_cpuid_entry2 *best; + struct kvm_lapic *apic = vcpu->arch.apic; + + best = kvm_find_cpuid_entry(vcpu, 1, 0); + if (!best) + return; + + /* Update OSXSAVE bit */ + if (cpu_has_xsave && best->function == 0x1) { + best->ecx &= ~(bit(X86_FEATURE_OSXSAVE)); + if (kvm_read_cr4_bits(vcpu, X86_CR4_OSXSAVE)) + best->ecx |= bit(X86_FEATURE_OSXSAVE); + } + + if (apic) { + if (best->ecx & bit(X86_FEATURE_TSC_DEADLINE_TIMER)) + apic->lapic_timer.timer_mode_mask = 3 << 17; + else + apic->lapic_timer.timer_mode_mask = 1 << 17; + } + + kvm_pmu_cpuid_update(vcpu); +} + +static int is_efer_nx(void) +{ + unsigned long long efer = 0; + + rdmsrl_safe(MSR_EFER, &efer); + return efer & EFER_NX; +} + +static void cpuid_fix_nx_cap(struct kvm_vcpu *vcpu) +{ + int i; + struct kvm_cpuid_entry2 *e, *entry; + + entry = NULL; + for (i = 0; i < vcpu->arch.cpuid_nent; ++i) { + e = &vcpu->arch.cpuid_entries[i]; + if (e->function == 0x80000001) { + entry = e; + break; + } + } + if (entry && (entry->edx & (1 << 20)) && !is_efer_nx()) { + entry->edx &= ~(1 << 20); + printk(KERN_INFO "kvm: guest NX capability removed\n"); + } +} + +/* when an old userspace process fills a new kernel module */ +int kvm_vcpu_ioctl_set_cpuid(struct kvm_vcpu *vcpu, + struct kvm_cpuid *cpuid, + struct kvm_cpuid_entry __user *entries) +{ + int r, i; + struct kvm_cpuid_entry *cpuid_entries; + + r = -E2BIG; + if (cpuid->nent > KVM_MAX_CPUID_ENTRIES) + goto out; + r = -ENOMEM; + cpuid_entries = vmalloc(sizeof(struct kvm_cpuid_entry) * cpuid->nent); + if (!cpuid_entries) + goto out; + r = -EFAULT; + if (copy_from_user(cpuid_entries, entries, + cpuid->nent * sizeof(struct kvm_cpuid_entry))) + goto out_free; + for (i = 0; i < cpuid->nent; i++) { + vcpu->arch.cpuid_entries[i].function = cpuid_entries[i].function; + vcpu->arch.cpuid_entries[i].eax = cpuid_entries[i].eax; + vcpu->arch.cpuid_entries[i].ebx = cpuid_entries[i].ebx; + vcpu->arch.cpuid_entries[i].ecx = cpuid_entries[i].ecx; + vcpu->arch.cpuid_entries[i].edx = cpuid_entries[i].edx; + vcpu->arch.cpuid_entries[i].index = 0; + vcpu->arch.cpuid_entries[i].flags = 0; + vcpu->arch.cpuid_entries[i].padding[0] = 0; + vcpu->arch.cpuid_entries[i].padding[1] = 0; + vcpu->arch.cpuid_entries[i].padding[2] = 0; + } + vcpu->arch.cpuid_nent = cpuid->nent; + cpuid_fix_nx_cap(vcpu); + r = 0; + kvm_apic_set_version(vcpu); + kvm_x86_ops->cpuid_update(vcpu); + kvm_update_cpuid(vcpu); + +out_free: + vfree(cpuid_entries); +out: + return r; +} + +int kvm_vcpu_ioctl_set_cpuid2(struct kvm_vcpu *vcpu, + struct kvm_cpuid2 *cpuid, + struct kvm_cpuid_entry2 __user *entries) +{ + int r; + + r = -E2BIG; + if (cpuid->nent > KVM_MAX_CPUID_ENTRIES) + goto out; + r = -EFAULT; + if (copy_from_user(&vcpu->arch.cpuid_entries, entries, + cpuid->nent * sizeof(struct kvm_cpuid_entry2))) + goto out; + vcpu->arch.cpuid_nent = cpuid->nent; + kvm_apic_set_version(vcpu); + kvm_x86_ops->cpuid_update(vcpu); + kvm_update_cpuid(vcpu); + return 0; + +out: + return r; +} + +int kvm_vcpu_ioctl_get_cpuid2(struct kvm_vcpu *vcpu, + struct kvm_cpuid2 *cpuid, + struct kvm_cpuid_entry2 __user *entries) +{ + int r; + + r = -E2BIG; + if (cpuid->nent < vcpu->arch.cpuid_nent) + goto out; + r = -EFAULT; + if (copy_to_user(entries, &vcpu->arch.cpuid_entries, + vcpu->arch.cpuid_nent * sizeof(struct kvm_cpuid_entry2))) + goto out; + return 0; + +out: + cpuid->nent = vcpu->arch.cpuid_nent; + return r; +} + +static void cpuid_mask(u32 *word, int wordnum) +{ + *word &= boot_cpu_data.x86_capability[wordnum]; +} + +static void do_cpuid_1_ent(struct kvm_cpuid_entry2 *entry, u32 function, + u32 index) +{ + entry->function = function; + entry->index = index; + cpuid_count(entry->function, entry->index, + &entry->eax, &entry->ebx, &entry->ecx, &entry->edx); + entry->flags = 0; +} + +static bool supported_xcr0_bit(unsigned bit) +{ + u64 mask = ((u64)1 << bit); + + return mask & (XSTATE_FP | XSTATE_SSE | XSTATE_YMM) & host_xcr0; +} + +#define F(x) bit(X86_FEATURE_##x) + +static int do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function, + u32 index, int *nent, int maxnent) +{ + int r; + unsigned f_nx = is_efer_nx() ? F(NX) : 0; +#ifdef CONFIG_X86_64 + unsigned f_gbpages = (kvm_x86_ops->get_lpage_level() == PT_PDPE_LEVEL) + ? F(GBPAGES) : 0; + unsigned f_lm = F(LM); +#else + unsigned f_gbpages = 0; + unsigned f_lm = 0; +#endif + unsigned f_rdtscp = kvm_x86_ops->rdtscp_supported() ? F(RDTSCP) : 0; + + /* cpuid 1.edx */ + const u32 kvm_supported_word0_x86_features = + F(FPU) | F(VME) | F(DE) | F(PSE) | + F(TSC) | F(MSR) | F(PAE) | F(MCE) | + F(CX8) | F(APIC) | 0 /* Reserved */ | F(SEP) | + F(MTRR) | F(PGE) | F(MCA) | F(CMOV) | + F(PAT) | F(PSE36) | 0 /* PSN */ | F(CLFLSH) | + 0 /* Reserved, DS, ACPI */ | F(MMX) | + F(FXSR) | F(XMM) | F(XMM2) | F(SELFSNOOP) | + 0 /* HTT, TM, Reserved, PBE */; + /* cpuid 0x80000001.edx */ + const u32 kvm_supported_word1_x86_features = + F(FPU) | F(VME) | F(DE) | F(PSE) | + F(TSC) | F(MSR) | F(PAE) | F(MCE) | + F(CX8) | F(APIC) | 0 /* Reserved */ | F(SYSCALL) | + F(MTRR) | F(PGE) | F(MCA) | F(CMOV) | + F(PAT) | F(PSE36) | 0 /* Reserved */ | + f_nx | 0 /* Reserved */ | F(MMXEXT) | F(MMX) | + F(FXSR) | F(FXSR_OPT) | f_gbpages | f_rdtscp | + 0 /* Reserved */ | f_lm | F(3DNOWEXT) | F(3DNOW); + /* cpuid 1.ecx */ + const u32 kvm_supported_word4_x86_features = + F(XMM3) | F(PCLMULQDQ) | 0 /* DTES64, MONITOR */ | + 0 /* DS-CPL, VMX, SMX, EST */ | + 0 /* TM2 */ | F(SSSE3) | 0 /* CNXT-ID */ | 0 /* Reserved */ | + F(FMA) | F(CX16) | 0 /* xTPR Update, PDCM */ | + 0 /* Reserved, DCA */ | F(XMM4_1) | + F(XMM4_2) | F(X2APIC) | F(MOVBE) | F(POPCNT) | + 0 /* Reserved*/ | F(AES) | F(XSAVE) | 0 /* OSXSAVE */ | F(AVX) | + F(F16C) | F(RDRAND); + /* cpuid 0x80000001.ecx */ + const u32 kvm_supported_word6_x86_features = + F(LAHF_LM) | F(CMP_LEGACY) | 0 /*SVM*/ | 0 /* ExtApicSpace */ | + F(CR8_LEGACY) | F(ABM) | F(SSE4A) | F(MISALIGNSSE) | + F(3DNOWPREFETCH) | 0 /* OSVW */ | 0 /* IBS */ | F(XOP) | + 0 /* SKINIT, WDT, LWP */ | F(FMA4) | F(TBM); + + /* cpuid 0xC0000001.edx */ + const u32 kvm_supported_word5_x86_features = + F(XSTORE) | F(XSTORE_EN) | F(XCRYPT) | F(XCRYPT_EN) | + F(ACE2) | F(ACE2_EN) | F(PHE) | F(PHE_EN) | + F(PMM) | F(PMM_EN); + + /* cpuid 7.0.ebx */ + const u32 kvm_supported_word9_x86_features = + F(FSGSBASE) | F(BMI1) | F(AVX2) | F(SMEP) | F(BMI2) | F(ERMS); + + /* all calls to cpuid_count() should be made on the same cpu */ + get_cpu(); + + r = -E2BIG; + + if (*nent >= maxnent) + goto out; + + do_cpuid_1_ent(entry, function, index); + ++*nent; + + switch (function) { + case 0: + entry->eax = min(entry->eax, (u32)0xd); + break; + case 1: + entry->edx &= kvm_supported_word0_x86_features; + cpuid_mask(&entry->edx, 0); + entry->ecx &= kvm_supported_word4_x86_features; + cpuid_mask(&entry->ecx, 4); + /* we support x2apic emulation even if host does not support + * it since we emulate x2apic in software */ + entry->ecx |= F(X2APIC); + break; + /* function 2 entries are STATEFUL. That is, repeated cpuid commands + * may return different values. This forces us to get_cpu() before + * issuing the first command, and also to emulate this annoying behavior + * in kvm_emulate_cpuid() using KVM_CPUID_FLAG_STATE_READ_NEXT */ + case 2: { + int t, times = entry->eax & 0xff; + + entry->flags |= KVM_CPUID_FLAG_STATEFUL_FUNC; + entry->flags |= KVM_CPUID_FLAG_STATE_READ_NEXT; + for (t = 1; t < times; ++t) { + if (*nent >= maxnent) + goto out; + + do_cpuid_1_ent(&entry[t], function, 0); + entry[t].flags |= KVM_CPUID_FLAG_STATEFUL_FUNC; + ++*nent; + } + break; + } + /* function 4 has additional index. */ + case 4: { + int i, cache_type; + + entry->flags |= KVM_CPUID_FLAG_SIGNIFCANT_INDEX; + /* read more entries until cache_type is zero */ + for (i = 1; ; ++i) { + if (*nent >= maxnent) + goto out; + + cache_type = entry[i - 1].eax & 0x1f; + if (!cache_type) + break; + do_cpuid_1_ent(&entry[i], function, i); + entry[i].flags |= + KVM_CPUID_FLAG_SIGNIFCANT_INDEX; + ++*nent; + } + break; + } + case 7: { + entry->flags |= KVM_CPUID_FLAG_SIGNIFCANT_INDEX; + /* Mask ebx against host capbability word 9 */ + if (index == 0) { + entry->ebx &= kvm_supported_word9_x86_features; + cpuid_mask(&entry->ebx, 9); + } else + entry->ebx = 0; + entry->eax = 0; + entry->ecx = 0; + entry->edx = 0; + break; + } + case 9: + break; + case 0xa: { /* Architectural Performance Monitoring */ + struct x86_pmu_capability cap; + union cpuid10_eax eax; + union cpuid10_edx edx; + + perf_get_x86_pmu_capability(&cap); + + /* + * Only support guest architectural pmu on a host + * with architectural pmu. + */ + if (!cap.version) + memset(&cap, 0, sizeof(cap)); + + eax.split.version_id = min(cap.version, 2); + eax.split.num_counters = cap.num_counters_gp; + eax.split.bit_width = cap.bit_width_gp; + eax.split.mask_length = cap.events_mask_len; + + edx.split.num_counters_fixed = cap.num_counters_fixed; + edx.split.bit_width_fixed = cap.bit_width_fixed; + edx.split.reserved = 0; + + entry->eax = eax.full; + entry->ebx = cap.events_mask; + entry->ecx = 0; + entry->edx = edx.full; + break; + } + /* function 0xb has additional index. */ + case 0xb: { + int i, level_type; + + entry->flags |= KVM_CPUID_FLAG_SIGNIFCANT_INDEX; + /* read more entries until level_type is zero */ + for (i = 1; ; ++i) { + if (*nent >= maxnent) + goto out; + + level_type = entry[i - 1].ecx & 0xff00; + if (!level_type) + break; + do_cpuid_1_ent(&entry[i], function, i); + entry[i].flags |= + KVM_CPUID_FLAG_SIGNIFCANT_INDEX; + ++*nent; + } + break; + } + case 0xd: { + int idx, i; + + entry->flags |= KVM_CPUID_FLAG_SIGNIFCANT_INDEX; + for (idx = 1, i = 1; idx < 64; ++idx) { + if (*nent >= maxnent) + goto out; + + do_cpuid_1_ent(&entry[i], function, idx); + if (entry[i].eax == 0 || !supported_xcr0_bit(idx)) + continue; + entry[i].flags |= + KVM_CPUID_FLAG_SIGNIFCANT_INDEX; + ++*nent; + ++i; + } + break; + } + case KVM_CPUID_SIGNATURE: { + char signature[12] = "KVMKVMKVM\0\0"; + u32 *sigptr = (u32 *)signature; + entry->eax = 0; + entry->ebx = sigptr[0]; + entry->ecx = sigptr[1]; + entry->edx = sigptr[2]; + break; + } + case KVM_CPUID_FEATURES: + entry->eax = (1 << KVM_FEATURE_CLOCKSOURCE) | + (1 << KVM_FEATURE_NOP_IO_DELAY) | + (1 << KVM_FEATURE_CLOCKSOURCE2) | + (1 << KVM_FEATURE_ASYNC_PF) | + (1 << KVM_FEATURE_CLOCKSOURCE_STABLE_BIT); + + if (sched_info_on()) + entry->eax |= (1 << KVM_FEATURE_STEAL_TIME); + + entry->ebx = 0; + entry->ecx = 0; + entry->edx = 0; + break; + case 0x80000000: + entry->eax = min(entry->eax, 0x8000001a); + break; + case 0x80000001: + entry->edx &= kvm_supported_word1_x86_features; + cpuid_mask(&entry->edx, 1); + entry->ecx &= kvm_supported_word6_x86_features; + cpuid_mask(&entry->ecx, 6); + break; + case 0x80000008: { + unsigned g_phys_as = (entry->eax >> 16) & 0xff; + unsigned virt_as = max((entry->eax >> 8) & 0xff, 48U); + unsigned phys_as = entry->eax & 0xff; + + if (!g_phys_as) + g_phys_as = phys_as; + entry->eax = g_phys_as | (virt_as << 8); + entry->ebx = entry->edx = 0; + break; + } + case 0x80000019: + entry->ecx = entry->edx = 0; + break; + case 0x8000001a: + break; + case 0x8000001d: + break; + /*Add support for Centaur's CPUID instruction*/ + case 0xC0000000: + /*Just support up to 0xC0000004 now*/ + entry->eax = min(entry->eax, 0xC0000004); + break; + case 0xC0000001: + entry->edx &= kvm_supported_word5_x86_features; + cpuid_mask(&entry->edx, 5); + break; + case 3: /* Processor serial number */ + case 5: /* MONITOR/MWAIT */ + case 6: /* Thermal management */ + case 0x80000007: /* Advanced power management */ + case 0xC0000002: + case 0xC0000003: + case 0xC0000004: + default: + entry->eax = entry->ebx = entry->ecx = entry->edx = 0; + break; + } + + kvm_x86_ops->set_supported_cpuid(function, entry); + + r = 0; + +out: + put_cpu(); + + return r; +} + +#undef F + +struct kvm_cpuid_param { + u32 func; + u32 idx; + bool has_leaf_count; + bool (*qualifier)(struct kvm_cpuid_param *param); +}; + +static bool is_centaur_cpu(struct kvm_cpuid_param *param) +{ + return boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR; +} + +int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid, + struct kvm_cpuid_entry2 __user *entries) +{ + struct kvm_cpuid_entry2 *cpuid_entries; + int limit, nent = 0, r = -E2BIG, i; + u32 func; + static struct kvm_cpuid_param param[] = { + { .func = 0, .has_leaf_count = true }, + { .func = 0x80000000, .has_leaf_count = true }, + { .func = 0xC0000000, .qualifier = is_centaur_cpu, .has_leaf_count = true }, + { .func = KVM_CPUID_SIGNATURE }, + { .func = KVM_CPUID_FEATURES }, + }; + + if (cpuid->nent < 1) + goto out; + if (cpuid->nent > KVM_MAX_CPUID_ENTRIES) + cpuid->nent = KVM_MAX_CPUID_ENTRIES; + r = -ENOMEM; + cpuid_entries = vmalloc(sizeof(struct kvm_cpuid_entry2) * cpuid->nent); + if (!cpuid_entries) + goto out; + + r = 0; + for (i = 0; i < ARRAY_SIZE(param); i++) { + struct kvm_cpuid_param *ent = ¶m[i]; + + if (ent->qualifier && !ent->qualifier(ent)) + continue; + + r = do_cpuid_ent(&cpuid_entries[nent], ent->func, ent->idx, + &nent, cpuid->nent); + + if (r) + goto out_free; + + if (!ent->has_leaf_count) + continue; + + limit = cpuid_entries[nent - 1].eax; + for (func = ent->func + 1; func <= limit && nent < cpuid->nent && r == 0; ++func) + r = do_cpuid_ent(&cpuid_entries[nent], func, ent->idx, + &nent, cpuid->nent); + + if (r) + goto out_free; + } + + r = -EFAULT; + if (copy_to_user(entries, cpuid_entries, + nent * sizeof(struct kvm_cpuid_entry2))) + goto out_free; + cpuid->nent = nent; + r = 0; + +out_free: + vfree(cpuid_entries); +out: + return r; +} + +static int move_to_next_stateful_cpuid_entry(struct kvm_vcpu *vcpu, int i) +{ + struct kvm_cpuid_entry2 *e = &vcpu->arch.cpuid_entries[i]; + int j, nent = vcpu->arch.cpuid_nent; + + e->flags &= ~KVM_CPUID_FLAG_STATE_READ_NEXT; + /* when no next entry is found, the current entry[i] is reselected */ + for (j = i + 1; ; j = (j + 1) % nent) { + struct kvm_cpuid_entry2 *ej = &vcpu->arch.cpuid_entries[j]; + if (ej->function == e->function) { + ej->flags |= KVM_CPUID_FLAG_STATE_READ_NEXT; + return j; + } + } + return 0; /* silence gcc, even though control never reaches here */ +} + +/* find an entry with matching function, matching index (if needed), and that + * should be read next (if it's stateful) */ +static int is_matching_cpuid_entry(struct kvm_cpuid_entry2 *e, + u32 function, u32 index) +{ + if (e->function != function) + return 0; + if ((e->flags & KVM_CPUID_FLAG_SIGNIFCANT_INDEX) && e->index != index) + return 0; + if ((e->flags & KVM_CPUID_FLAG_STATEFUL_FUNC) && + !(e->flags & KVM_CPUID_FLAG_STATE_READ_NEXT)) + return 0; + return 1; +} + +struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu, + u32 function, u32 index) +{ + int i; + struct kvm_cpuid_entry2 *best = NULL; + + for (i = 0; i < vcpu->arch.cpuid_nent; ++i) { + struct kvm_cpuid_entry2 *e; + + e = &vcpu->arch.cpuid_entries[i]; + if (is_matching_cpuid_entry(e, function, index)) { + if (e->flags & KVM_CPUID_FLAG_STATEFUL_FUNC) + move_to_next_stateful_cpuid_entry(vcpu, i); + best = e; + break; + } + } + return best; +} +EXPORT_SYMBOL_GPL(kvm_find_cpuid_entry); + +int cpuid_maxphyaddr(struct kvm_vcpu *vcpu) +{ + struct kvm_cpuid_entry2 *best; + + best = kvm_find_cpuid_entry(vcpu, 0x80000000, 0); + if (!best || best->eax < 0x80000008) + goto not_found; + best = kvm_find_cpuid_entry(vcpu, 0x80000008, 0); + if (best) + return best->eax & 0xff; +not_found: + return 36; +} + +/* + * If no match is found, check whether we exceed the vCPU's limit + * and return the content of the highest valid _standard_ leaf instead. + * This is to satisfy the CPUID specification. + */ +static struct kvm_cpuid_entry2* check_cpuid_limit(struct kvm_vcpu *vcpu, + u32 function, u32 index) +{ + struct kvm_cpuid_entry2 *maxlevel; + + maxlevel = kvm_find_cpuid_entry(vcpu, function & 0x80000000, 0); + if (!maxlevel || maxlevel->eax >= function) + return NULL; + if (function & 0x80000000) { + maxlevel = kvm_find_cpuid_entry(vcpu, 0, 0); + if (!maxlevel) + return NULL; + } + return kvm_find_cpuid_entry(vcpu, maxlevel->eax, index); +} + +void kvm_emulate_cpuid(struct kvm_vcpu *vcpu) +{ + u32 function, index; + struct kvm_cpuid_entry2 *best; + + function = kvm_register_read(vcpu, VCPU_REGS_RAX); + index = kvm_register_read(vcpu, VCPU_REGS_RCX); + kvm_register_write(vcpu, VCPU_REGS_RAX, 0); + kvm_register_write(vcpu, VCPU_REGS_RBX, 0); + kvm_register_write(vcpu, VCPU_REGS_RCX, 0); + kvm_register_write(vcpu, VCPU_REGS_RDX, 0); + best = kvm_find_cpuid_entry(vcpu, function, index); + + if (!best) + best = check_cpuid_limit(vcpu, function, index); + + if (best) { + kvm_register_write(vcpu, VCPU_REGS_RAX, best->eax); + kvm_register_write(vcpu, VCPU_REGS_RBX, best->ebx); + kvm_register_write(vcpu, VCPU_REGS_RCX, best->ecx); + kvm_register_write(vcpu, VCPU_REGS_RDX, best->edx); + } + kvm_x86_ops->skip_emulated_instruction(vcpu); + trace_kvm_cpuid(function, + kvm_register_read(vcpu, VCPU_REGS_RAX), + kvm_register_read(vcpu, VCPU_REGS_RBX), + kvm_register_read(vcpu, VCPU_REGS_RCX), + kvm_register_read(vcpu, VCPU_REGS_RDX)); +} +EXPORT_SYMBOL_GPL(kvm_emulate_cpuid); diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h new file mode 100644 index 000000000000..5b97e1797a6d --- /dev/null +++ b/arch/x86/kvm/cpuid.h @@ -0,0 +1,46 @@ +#ifndef ARCH_X86_KVM_CPUID_H +#define ARCH_X86_KVM_CPUID_H + +#include "x86.h" + +void kvm_update_cpuid(struct kvm_vcpu *vcpu); +struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu, + u32 function, u32 index); +int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid, + struct kvm_cpuid_entry2 __user *entries); +int kvm_vcpu_ioctl_set_cpuid(struct kvm_vcpu *vcpu, + struct kvm_cpuid *cpuid, + struct kvm_cpuid_entry __user *entries); +int kvm_vcpu_ioctl_set_cpuid2(struct kvm_vcpu *vcpu, + struct kvm_cpuid2 *cpuid, + struct kvm_cpuid_entry2 __user *entries); +int kvm_vcpu_ioctl_get_cpuid2(struct kvm_vcpu *vcpu, + struct kvm_cpuid2 *cpuid, + struct kvm_cpuid_entry2 __user *entries); + + +static inline bool guest_cpuid_has_xsave(struct kvm_vcpu *vcpu) +{ + struct kvm_cpuid_entry2 *best; + + best = kvm_find_cpuid_entry(vcpu, 1, 0); + return best && (best->ecx & bit(X86_FEATURE_XSAVE)); +} + +static inline bool guest_cpuid_has_smep(struct kvm_vcpu *vcpu) +{ + struct kvm_cpuid_entry2 *best; + + best = kvm_find_cpuid_entry(vcpu, 7, 0); + return best && (best->ebx & bit(X86_FEATURE_SMEP)); +} + +static inline bool guest_cpuid_has_fsgsbase(struct kvm_vcpu *vcpu) +{ + struct kvm_cpuid_entry2 *best; + + best = kvm_find_cpuid_entry(vcpu, 7, 0); + return best && (best->ebx & bit(X86_FEATURE_FSGSBASE)); +} + +#endif diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index f1e3be18a08f..05a562b85025 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -125,8 +125,9 @@ #define Lock (1<<26) /* lock prefix is allowed for the instruction */ #define Priv (1<<27) /* instruction generates #GP if current CPL != 0 */ #define No64 (1<<28) +#define PageTable (1 << 29) /* instruction used to write page table */ /* Source 2 operand type */ -#define Src2Shift (29) +#define Src2Shift (30) #define Src2None (OpNone << Src2Shift) #define Src2CL (OpCL << Src2Shift) #define Src2ImmByte (OpImmByte << Src2Shift) @@ -1674,11 +1675,6 @@ static int em_jmp_far(struct x86_emulate_ctxt *ctxt) return X86EMUL_CONTINUE; } -static int em_grp1a(struct x86_emulate_ctxt *ctxt) -{ - return emulate_pop(ctxt, &ctxt->dst.val, ctxt->dst.bytes); -} - static int em_grp2(struct x86_emulate_ctxt *ctxt) { switch (ctxt->modrm_reg) { @@ -1788,7 +1784,7 @@ static int em_grp45(struct x86_emulate_ctxt *ctxt) return rc; } -static int em_grp9(struct x86_emulate_ctxt *ctxt) +static int em_cmpxchg8b(struct x86_emulate_ctxt *ctxt) { u64 old = ctxt->dst.orig_val64; @@ -1831,6 +1827,24 @@ static int em_ret_far(struct x86_emulate_ctxt *ctxt) return rc; } +static int em_cmpxchg(struct x86_emulate_ctxt *ctxt) +{ + /* Save real source value, then compare EAX against destination. */ + ctxt->src.orig_val = ctxt->src.val; + ctxt->src.val = ctxt->regs[VCPU_REGS_RAX]; + emulate_2op_SrcV(ctxt, "cmp"); + + if (ctxt->eflags & EFLG_ZF) { + /* Success: write back to memory. */ + ctxt->dst.val = ctxt->src.orig_val; + } else { + /* Failure: write the value we saw to EAX. */ + ctxt->dst.type = OP_REG; + ctxt->dst.addr.reg = (unsigned long *)&ctxt->regs[VCPU_REGS_RAX]; + } + return X86EMUL_CONTINUE; +} + static int em_lseg(struct x86_emulate_ctxt *ctxt) { int seg = ctxt->src2.val; @@ -2481,6 +2495,15 @@ static int em_das(struct x86_emulate_ctxt *ctxt) return X86EMUL_CONTINUE; } +static int em_call(struct x86_emulate_ctxt *ctxt) +{ + long rel = ctxt->src.val; + + ctxt->src.val = (unsigned long)ctxt->_eip; + jmp_rel(ctxt, rel); + return em_push(ctxt); +} + static int em_call_far(struct x86_emulate_ctxt *ctxt) { u16 sel, old_cs; @@ -2622,12 +2645,75 @@ static int em_rdtsc(struct x86_emulate_ctxt *ctxt) return X86EMUL_CONTINUE; } +static int em_rdpmc(struct x86_emulate_ctxt *ctxt) +{ + u64 pmc; + + if (ctxt->ops->read_pmc(ctxt, ctxt->regs[VCPU_REGS_RCX], &pmc)) + return emulate_gp(ctxt, 0); + ctxt->regs[VCPU_REGS_RAX] = (u32)pmc; + ctxt->regs[VCPU_REGS_RDX] = pmc >> 32; + return X86EMUL_CONTINUE; +} + static int em_mov(struct x86_emulate_ctxt *ctxt) { ctxt->dst.val = ctxt->src.val; return X86EMUL_CONTINUE; } +static int em_cr_write(struct x86_emulate_ctxt *ctxt) +{ + if (ctxt->ops->set_cr(ctxt, ctxt->modrm_reg, ctxt->src.val)) + return emulate_gp(ctxt, 0); + + /* Disable writeback. */ + ctxt->dst.type = OP_NONE; + return X86EMUL_CONTINUE; +} + +static int em_dr_write(struct x86_emulate_ctxt *ctxt) +{ + unsigned long val; + + if (ctxt->mode == X86EMUL_MODE_PROT64) + val = ctxt->src.val & ~0ULL; + else + val = ctxt->src.val & ~0U; + + /* #UD condition is already handled. */ + if (ctxt->ops->set_dr(ctxt, ctxt->modrm_reg, val) < 0) + return emulate_gp(ctxt, 0); + + /* Disable writeback. */ + ctxt->dst.type = OP_NONE; + return X86EMUL_CONTINUE; +} + +static int em_wrmsr(struct x86_emulate_ctxt *ctxt) +{ + u64 msr_data; + + msr_data = (u32)ctxt->regs[VCPU_REGS_RAX] + | ((u64)ctxt->regs[VCPU_REGS_RDX] << 32); + if (ctxt->ops->set_msr(ctxt, ctxt->regs[VCPU_REGS_RCX], msr_data)) + return emulate_gp(ctxt, 0); + + return X86EMUL_CONTINUE; +} + +static int em_rdmsr(struct x86_emulate_ctxt *ctxt) +{ + u64 msr_data; + + if (ctxt->ops->get_msr(ctxt, ctxt->regs[VCPU_REGS_RCX], &msr_data)) + return emulate_gp(ctxt, 0); + + ctxt->regs[VCPU_REGS_RAX] = (u32)msr_data; + ctxt->regs[VCPU_REGS_RDX] = msr_data >> 32; + return X86EMUL_CONTINUE; +} + static int em_mov_rm_sreg(struct x86_emulate_ctxt *ctxt) { if (ctxt->modrm_reg > VCPU_SREG_GS) @@ -2775,6 +2861,24 @@ static int em_jcxz(struct x86_emulate_ctxt *ctxt) return X86EMUL_CONTINUE; } +static int em_in(struct x86_emulate_ctxt *ctxt) +{ + if (!pio_in_emulated(ctxt, ctxt->dst.bytes, ctxt->src.val, + &ctxt->dst.val)) + return X86EMUL_IO_NEEDED; + + return X86EMUL_CONTINUE; +} + +static int em_out(struct x86_emulate_ctxt *ctxt) +{ + ctxt->ops->pio_out_emulated(ctxt, ctxt->src.bytes, ctxt->dst.val, + &ctxt->src.val, 1); + /* Disable writeback. */ + ctxt->dst.type = OP_NONE; + return X86EMUL_CONTINUE; +} + static int em_cli(struct x86_emulate_ctxt *ctxt) { if (emulator_bad_iopl(ctxt)) @@ -2794,6 +2898,69 @@ static int em_sti(struct x86_emulate_ctxt *ctxt) return X86EMUL_CONTINUE; } +static int em_bt(struct x86_emulate_ctxt *ctxt) +{ + /* Disable writeback. */ + ctxt->dst.type = OP_NONE; + /* only subword offset */ + ctxt->src.val &= (ctxt->dst.bytes << 3) - 1; + + emulate_2op_SrcV_nobyte(ctxt, "bt"); + return X86EMUL_CONTINUE; +} + +static int em_bts(struct x86_emulate_ctxt *ctxt) +{ + emulate_2op_SrcV_nobyte(ctxt, "bts"); + return X86EMUL_CONTINUE; +} + +static int em_btr(struct x86_emulate_ctxt *ctxt) +{ + emulate_2op_SrcV_nobyte(ctxt, "btr"); + return X86EMUL_CONTINUE; +} + +static int em_btc(struct x86_emulate_ctxt *ctxt) +{ + emulate_2op_SrcV_nobyte(ctxt, "btc"); + return X86EMUL_CONTINUE; +} + +static int em_bsf(struct x86_emulate_ctxt *ctxt) +{ + u8 zf; + + __asm__ ("bsf %2, %0; setz %1" + : "=r"(ctxt->dst.val), "=q"(zf) + : "r"(ctxt->src.val)); + + ctxt->eflags &= ~X86_EFLAGS_ZF; + if (zf) { + ctxt->eflags |= X86_EFLAGS_ZF; + /* Disable writeback. */ + ctxt->dst.type = OP_NONE; + } + return X86EMUL_CONTINUE; +} + +static int em_bsr(struct x86_emulate_ctxt *ctxt) +{ + u8 zf; + + __asm__ ("bsr %2, %0; setz %1" + : "=r"(ctxt->dst.val), "=q"(zf) + : "r"(ctxt->src.val)); + + ctxt->eflags &= ~X86_EFLAGS_ZF; + if (zf) { + ctxt->eflags |= X86_EFLAGS_ZF; + /* Disable writeback. */ + ctxt->dst.type = OP_NONE; + } + return X86EMUL_CONTINUE; +} + static bool valid_cr(int nr) { switch (nr) { @@ -2867,9 +3034,6 @@ static int check_cr_write(struct x86_emulate_ctxt *ctxt) break; } case 4: { - u64 cr4; - - cr4 = ctxt->ops->get_cr(ctxt, 4); ctxt->ops->get_msr(ctxt, MSR_EFER, &efer); if ((efer & EFER_LMA) && !(new_val & X86_CR4_PAE)) @@ -3003,6 +3167,8 @@ static int check_perm_out(struct x86_emulate_ctxt *ctxt) #define D2bv(_f) D((_f) | ByteOp), D(_f) #define D2bvIP(_f, _i, _p) DIP((_f) | ByteOp, _i, _p), DIP(_f, _i, _p) #define I2bv(_f, _e) I((_f) | ByteOp, _e), I(_f, _e) +#define I2bvIP(_f, _e, _i, _p) \ + IIP((_f) | ByteOp, _e, _i, _p), IIP(_f, _e, _i, _p) #define I6ALU(_f, _e) I2bv((_f) | DstMem | SrcReg | ModRM, _e), \ I2bv(((_f) | DstReg | SrcMem | ModRM) & ~Lock, _e), \ @@ -3033,17 +3199,17 @@ static struct opcode group7_rm7[] = { static struct opcode group1[] = { I(Lock, em_add), - I(Lock, em_or), + I(Lock | PageTable, em_or), I(Lock, em_adc), I(Lock, em_sbb), - I(Lock, em_and), + I(Lock | PageTable, em_and), I(Lock, em_sub), I(Lock, em_xor), I(0, em_cmp), }; static struct opcode group1A[] = { - D(DstMem | SrcNone | ModRM | Mov | Stack), N, N, N, N, N, N, N, + I(DstMem | SrcNone | ModRM | Mov | Stack, em_pop), N, N, N, N, N, N, N, }; static struct opcode group3[] = { @@ -3058,16 +3224,19 @@ static struct opcode group3[] = { }; static struct opcode group4[] = { - D(ByteOp | DstMem | SrcNone | ModRM | Lock), D(ByteOp | DstMem | SrcNone | ModRM | Lock), + I(ByteOp | DstMem | SrcNone | ModRM | Lock, em_grp45), + I(ByteOp | DstMem | SrcNone | ModRM | Lock, em_grp45), N, N, N, N, N, N, }; static struct opcode group5[] = { - D(DstMem | SrcNone | ModRM | Lock), D(DstMem | SrcNone | ModRM | Lock), - D(SrcMem | ModRM | Stack), + I(DstMem | SrcNone | ModRM | Lock, em_grp45), + I(DstMem | SrcNone | ModRM | Lock, em_grp45), + I(SrcMem | ModRM | Stack, em_grp45), I(SrcMemFAddr | ModRM | ImplicitOps | Stack, em_call_far), - D(SrcMem | ModRM | Stack), D(SrcMemFAddr | ModRM | ImplicitOps), - D(SrcMem | ModRM | Stack), N, + I(SrcMem | ModRM | Stack, em_grp45), + I(SrcMemFAddr | ModRM | ImplicitOps, em_grp45), + I(SrcMem | ModRM | Stack, em_grp45), N, }; static struct opcode group6[] = { @@ -3096,18 +3265,21 @@ static struct group_dual group7 = { { static struct opcode group8[] = { N, N, N, N, - D(DstMem | SrcImmByte | ModRM), D(DstMem | SrcImmByte | ModRM | Lock), - D(DstMem | SrcImmByte | ModRM | Lock), D(DstMem | SrcImmByte | ModRM | Lock), + I(DstMem | SrcImmByte | ModRM, em_bt), + I(DstMem | SrcImmByte | ModRM | Lock | PageTable, em_bts), + I(DstMem | SrcImmByte | ModRM | Lock, em_btr), + I(DstMem | SrcImmByte | ModRM | Lock | PageTable, em_btc), }; static struct group_dual group9 = { { - N, D(DstMem64 | ModRM | Lock), N, N, N, N, N, N, + N, I(DstMem64 | ModRM | Lock | PageTable, em_cmpxchg8b), N, N, N, N, N, N, }, { N, N, N, N, N, N, N, N, } }; static struct opcode group11[] = { - I(DstMem | SrcImm | ModRM | Mov, em_mov), X7(D(Undefined)), + I(DstMem | SrcImm | ModRM | Mov | PageTable, em_mov), + X7(D(Undefined)), }; static struct gprefix pfx_0f_6f_0f_7f = { @@ -3120,7 +3292,7 @@ static struct opcode opcode_table[256] = { I(ImplicitOps | Stack | No64 | Src2ES, em_push_sreg), I(ImplicitOps | Stack | No64 | Src2ES, em_pop_sreg), /* 0x08 - 0x0F */ - I6ALU(Lock, em_or), + I6ALU(Lock | PageTable, em_or), I(ImplicitOps | Stack | No64 | Src2CS, em_push_sreg), N, /* 0x10 - 0x17 */ @@ -3132,7 +3304,7 @@ static struct opcode opcode_table[256] = { I(ImplicitOps | Stack | No64 | Src2DS, em_push_sreg), I(ImplicitOps | Stack | No64 | Src2DS, em_pop_sreg), /* 0x20 - 0x27 */ - I6ALU(Lock, em_and), N, N, + I6ALU(Lock | PageTable, em_and), N, N, /* 0x28 - 0x2F */ I6ALU(Lock, em_sub), N, I(ByteOp | DstAcc | No64, em_das), /* 0x30 - 0x37 */ @@ -3155,8 +3327,8 @@ static struct opcode opcode_table[256] = { I(DstReg | SrcMem | ModRM | Src2Imm, em_imul_3op), I(SrcImmByte | Mov | Stack, em_push), I(DstReg | SrcMem | ModRM | Src2ImmByte, em_imul_3op), - D2bvIP(DstDI | SrcDX | Mov | String, ins, check_perm_in), /* insb, insw/insd */ - D2bvIP(SrcSI | DstDX | String, outs, check_perm_out), /* outsb, outsw/outsd */ + I2bvIP(DstDI | SrcDX | Mov | String, em_in, ins, check_perm_in), /* insb, insw/insd */ + I2bvIP(SrcSI | DstDX | String, em_out, outs, check_perm_out), /* outsb, outsw/outsd */ /* 0x70 - 0x7F */ X16(D(SrcImmByte)), /* 0x80 - 0x87 */ @@ -3165,11 +3337,11 @@ static struct opcode opcode_table[256] = { G(ByteOp | DstMem | SrcImm | ModRM | No64 | Group, group1), G(DstMem | SrcImmByte | ModRM | Group, group1), I2bv(DstMem | SrcReg | ModRM, em_test), - I2bv(DstMem | SrcReg | ModRM | Lock, em_xchg), + I2bv(DstMem | SrcReg | ModRM | Lock | PageTable, em_xchg), /* 0x88 - 0x8F */ - I2bv(DstMem | SrcReg | ModRM | Mov, em_mov), + I2bv(DstMem | SrcReg | ModRM | Mov | PageTable, em_mov), I2bv(DstReg | SrcMem | ModRM | Mov, em_mov), - I(DstMem | SrcNone | ModRM | Mov, em_mov_rm_sreg), + I(DstMem | SrcNone | ModRM | Mov | PageTable, em_mov_rm_sreg), D(ModRM | SrcMem | NoAccess | DstReg), I(ImplicitOps | SrcMem16 | ModRM, em_mov_sreg_rm), G(0, group1A), @@ -3182,7 +3354,7 @@ static struct opcode opcode_table[256] = { II(ImplicitOps | Stack, em_popf, popf), N, N, /* 0xA0 - 0xA7 */ I2bv(DstAcc | SrcMem | Mov | MemAbs, em_mov), - I2bv(DstMem | SrcAcc | Mov | MemAbs, em_mov), + I2bv(DstMem | SrcAcc | Mov | MemAbs | PageTable, em_mov), I2bv(SrcSI | DstDI | Mov | String, em_mov), I2bv(SrcSI | DstDI | String, em_cmp), /* 0xA8 - 0xAF */ @@ -3213,13 +3385,13 @@ static struct opcode opcode_table[256] = { /* 0xE0 - 0xE7 */ X3(I(SrcImmByte, em_loop)), I(SrcImmByte, em_jcxz), - D2bvIP(SrcImmUByte | DstAcc, in, check_perm_in), - D2bvIP(SrcAcc | DstImmUByte, out, check_perm_out), + I2bvIP(SrcImmUByte | DstAcc, em_in, in, check_perm_in), + I2bvIP(SrcAcc | DstImmUByte, em_out, out, check_perm_out), /* 0xE8 - 0xEF */ - D(SrcImm | Stack), D(SrcImm | ImplicitOps), + I(SrcImm | Stack, em_call), D(SrcImm | ImplicitOps), I(SrcImmFAddr | No64, em_jmp_far), D(SrcImmByte | ImplicitOps), - D2bvIP(SrcDX | DstAcc, in, check_perm_in), - D2bvIP(SrcAcc | DstDX, out, check_perm_out), + I2bvIP(SrcDX | DstAcc, em_in, in, check_perm_in), + I2bvIP(SrcAcc | DstDX, em_out, out, check_perm_out), /* 0xF0 - 0xF7 */ N, DI(ImplicitOps, icebp), N, N, DI(ImplicitOps | Priv, hlt), D(ImplicitOps), @@ -3242,15 +3414,15 @@ static struct opcode twobyte_table[256] = { /* 0x20 - 0x2F */ DIP(ModRM | DstMem | Priv | Op3264, cr_read, check_cr_read), DIP(ModRM | DstMem | Priv | Op3264, dr_read, check_dr_read), - DIP(ModRM | SrcMem | Priv | Op3264, cr_write, check_cr_write), - DIP(ModRM | SrcMem | Priv | Op3264, dr_write, check_dr_write), + IIP(ModRM | SrcMem | Priv | Op3264, em_cr_write, cr_write, check_cr_write), + IIP(ModRM | SrcMem | Priv | Op3264, em_dr_write, dr_write, check_dr_write), N, N, N, N, N, N, N, N, N, N, N, N, /* 0x30 - 0x3F */ - DI(ImplicitOps | Priv, wrmsr), + II(ImplicitOps | Priv, em_wrmsr, wrmsr), IIP(ImplicitOps, em_rdtsc, rdtsc, check_rdtsc), - DI(ImplicitOps | Priv, rdmsr), - DIP(ImplicitOps | Priv, rdpmc, check_rdpmc), + II(ImplicitOps | Priv, em_rdmsr, rdmsr), + IIP(ImplicitOps, em_rdpmc, rdpmc, check_rdpmc), I(ImplicitOps | VendorSpecific, em_sysenter), I(ImplicitOps | Priv | VendorSpecific, em_sysexit), N, N, @@ -3275,26 +3447,28 @@ static struct opcode twobyte_table[256] = { X16(D(ByteOp | DstMem | SrcNone | ModRM| Mov)), /* 0xA0 - 0xA7 */ I(Stack | Src2FS, em_push_sreg), I(Stack | Src2FS, em_pop_sreg), - DI(ImplicitOps, cpuid), D(DstMem | SrcReg | ModRM | BitOp), + DI(ImplicitOps, cpuid), I(DstMem | SrcReg | ModRM | BitOp, em_bt), D(DstMem | SrcReg | Src2ImmByte | ModRM), D(DstMem | SrcReg | Src2CL | ModRM), N, N, /* 0xA8 - 0xAF */ I(Stack | Src2GS, em_push_sreg), I(Stack | Src2GS, em_pop_sreg), - DI(ImplicitOps, rsm), D(DstMem | SrcReg | ModRM | BitOp | Lock), + DI(ImplicitOps, rsm), + I(DstMem | SrcReg | ModRM | BitOp | Lock | PageTable, em_bts), D(DstMem | SrcReg | Src2ImmByte | ModRM), D(DstMem | SrcReg | Src2CL | ModRM), D(ModRM), I(DstReg | SrcMem | ModRM, em_imul), /* 0xB0 - 0xB7 */ - D2bv(DstMem | SrcReg | ModRM | Lock), + I2bv(DstMem | SrcReg | ModRM | Lock | PageTable, em_cmpxchg), I(DstReg | SrcMemFAddr | ModRM | Src2SS, em_lseg), - D(DstMem | SrcReg | ModRM | BitOp | Lock), + I(DstMem | SrcReg | ModRM | BitOp | Lock, em_btr), I(DstReg | SrcMemFAddr | ModRM | Src2FS, em_lseg), I(DstReg | SrcMemFAddr | ModRM | Src2GS, em_lseg), D(ByteOp | DstReg | SrcMem | ModRM | Mov), D(DstReg | SrcMem16 | ModRM | Mov), /* 0xB8 - 0xBF */ N, N, - G(BitOp, group8), D(DstMem | SrcReg | ModRM | BitOp | Lock), - D(DstReg | SrcMem | ModRM), D(DstReg | SrcMem | ModRM), + G(BitOp, group8), + I(DstMem | SrcReg | ModRM | BitOp | Lock | PageTable, em_btc), + I(DstReg | SrcMem | ModRM, em_bsf), I(DstReg | SrcMem | ModRM, em_bsr), D(ByteOp | DstReg | SrcMem | ModRM | Mov), D(DstReg | SrcMem16 | ModRM | Mov), /* 0xC0 - 0xCF */ D2bv(DstMem | SrcReg | ModRM | Lock), @@ -3320,6 +3494,7 @@ static struct opcode twobyte_table[256] = { #undef D2bv #undef D2bvIP #undef I2bv +#undef I2bvIP #undef I6ALU static unsigned imm_size(struct x86_emulate_ctxt *ctxt) @@ -3697,6 +3872,11 @@ done: return (rc != X86EMUL_CONTINUE) ? EMULATION_FAILED : EMULATION_OK; } +bool x86_page_table_writing_insn(struct x86_emulate_ctxt *ctxt) +{ + return ctxt->d & PageTable; +} + static bool string_insn_completed(struct x86_emulate_ctxt *ctxt) { /* The second termination condition only applies for REPE @@ -3720,7 +3900,6 @@ static bool string_insn_completed(struct x86_emulate_ctxt *ctxt) int x86_emulate_insn(struct x86_emulate_ctxt *ctxt) { struct x86_emulate_ops *ops = ctxt->ops; - u64 msr_data; int rc = X86EMUL_CONTINUE; int saved_dst_type = ctxt->dst.type; @@ -3854,15 +4033,6 @@ special_insn: goto cannot_emulate; ctxt->dst.val = (s32) ctxt->src.val; break; - case 0x6c: /* insb */ - case 0x6d: /* insw/insd */ - ctxt->src.val = ctxt->regs[VCPU_REGS_RDX]; - goto do_io_in; - case 0x6e: /* outsb */ - case 0x6f: /* outsw/outsd */ - ctxt->dst.val = ctxt->regs[VCPU_REGS_RDX]; - goto do_io_out; - break; case 0x70 ... 0x7f: /* jcc (short) */ if (test_cc(ctxt->b, ctxt->eflags)) jmp_rel(ctxt, ctxt->src.val); @@ -3870,9 +4040,6 @@ special_insn: case 0x8d: /* lea r16/r32, m */ ctxt->dst.val = ctxt->src.addr.mem.ea; break; - case 0x8f: /* pop (sole member of Grp1a) */ - rc = em_grp1a(ctxt); - break; case 0x90 ... 0x97: /* nop / xchg reg, rax */ if (ctxt->dst.addr.reg == &ctxt->regs[VCPU_REGS_RAX]) break; @@ -3905,38 +4072,11 @@ special_insn: ctxt->src.val = ctxt->regs[VCPU_REGS_RCX]; rc = em_grp2(ctxt); break; - case 0xe4: /* inb */ - case 0xe5: /* in */ - goto do_io_in; - case 0xe6: /* outb */ - case 0xe7: /* out */ - goto do_io_out; - case 0xe8: /* call (near) */ { - long int rel = ctxt->src.val; - ctxt->src.val = (unsigned long) ctxt->_eip; - jmp_rel(ctxt, rel); - rc = em_push(ctxt); - break; - } case 0xe9: /* jmp rel */ case 0xeb: /* jmp rel short */ jmp_rel(ctxt, ctxt->src.val); ctxt->dst.type = OP_NONE; /* Disable writeback. */ break; - case 0xec: /* in al,dx */ - case 0xed: /* in (e/r)ax,dx */ - do_io_in: - if (!pio_in_emulated(ctxt, ctxt->dst.bytes, ctxt->src.val, - &ctxt->dst.val)) - goto done; /* IO is needed */ - break; - case 0xee: /* out dx,al */ - case 0xef: /* out dx,(e/r)ax */ - do_io_out: - ops->pio_out_emulated(ctxt, ctxt->src.bytes, ctxt->dst.val, - &ctxt->src.val, 1); - ctxt->dst.type = OP_NONE; /* Disable writeback. */ - break; case 0xf4: /* hlt */ ctxt->ops->halt(ctxt); break; @@ -3956,12 +4096,6 @@ special_insn: case 0xfd: /* std */ ctxt->eflags |= EFLG_DF; break; - case 0xfe: /* Grp4 */ - rc = em_grp45(ctxt); - break; - case 0xff: /* Grp5 */ - rc = em_grp45(ctxt); - break; default: goto cannot_emulate; } @@ -4036,49 +4170,6 @@ twobyte_insn: case 0x21: /* mov from dr to reg */ ops->get_dr(ctxt, ctxt->modrm_reg, &ctxt->dst.val); break; - case 0x22: /* mov reg, cr */ - if (ops->set_cr(ctxt, ctxt->modrm_reg, ctxt->src.val)) { - emulate_gp(ctxt, 0); - rc = X86EMUL_PROPAGATE_FAULT; - goto done; - } - ctxt->dst.type = OP_NONE; - break; - case 0x23: /* mov from reg to dr */ - if (ops->set_dr(ctxt, ctxt->modrm_reg, ctxt->src.val & - ((ctxt->mode == X86EMUL_MODE_PROT64) ? - ~0ULL : ~0U)) < 0) { - /* #UD condition is already handled by the code above */ - emulate_gp(ctxt, 0); - rc = X86EMUL_PROPAGATE_FAULT; - goto done; - } - - ctxt->dst.type = OP_NONE; /* no writeback */ - break; - case 0x30: - /* wrmsr */ - msr_data = (u32)ctxt->regs[VCPU_REGS_RAX] - | ((u64)ctxt->regs[VCPU_REGS_RDX] << 32); - if (ops->set_msr(ctxt, ctxt->regs[VCPU_REGS_RCX], msr_data)) { - emulate_gp(ctxt, 0); - rc = X86EMUL_PROPAGATE_FAULT; - goto done; - } - rc = X86EMUL_CONTINUE; - break; - case 0x32: - /* rdmsr */ - if (ops->get_msr(ctxt, ctxt->regs[VCPU_REGS_RCX], &msr_data)) { - emulate_gp(ctxt, 0); - rc = X86EMUL_PROPAGATE_FAULT; - goto done; - } else { - ctxt->regs[VCPU_REGS_RAX] = (u32)msr_data; - ctxt->regs[VCPU_REGS_RDX] = msr_data >> 32; - } - rc = X86EMUL_CONTINUE; - break; case 0x40 ... 0x4f: /* cmov */ ctxt->dst.val = ctxt->dst.orig_val = ctxt->src.val; if (!test_cc(ctxt->b, ctxt->eflags)) @@ -4091,93 +4182,21 @@ twobyte_insn: case 0x90 ... 0x9f: /* setcc r/m8 */ ctxt->dst.val = test_cc(ctxt->b, ctxt->eflags); break; - case 0xa3: - bt: /* bt */ - ctxt->dst.type = OP_NONE; - /* only subword offset */ - ctxt->src.val &= (ctxt->dst.bytes << 3) - 1; - emulate_2op_SrcV_nobyte(ctxt, "bt"); - break; case 0xa4: /* shld imm8, r, r/m */ case 0xa5: /* shld cl, r, r/m */ emulate_2op_cl(ctxt, "shld"); break; - case 0xab: - bts: /* bts */ - emulate_2op_SrcV_nobyte(ctxt, "bts"); - break; case 0xac: /* shrd imm8, r, r/m */ case 0xad: /* shrd cl, r, r/m */ emulate_2op_cl(ctxt, "shrd"); break; case 0xae: /* clflush */ break; - case 0xb0 ... 0xb1: /* cmpxchg */ - /* - * Save real source value, then compare EAX against - * destination. - */ - ctxt->src.orig_val = ctxt->src.val; - ctxt->src.val = ctxt->regs[VCPU_REGS_RAX]; - emulate_2op_SrcV(ctxt, "cmp"); - if (ctxt->eflags & EFLG_ZF) { - /* Success: write back to memory. */ - ctxt->dst.val = ctxt->src.orig_val; - } else { - /* Failure: write the value we saw to EAX. */ - ctxt->dst.type = OP_REG; - ctxt->dst.addr.reg = (unsigned long *)&ctxt->regs[VCPU_REGS_RAX]; - } - break; - case 0xb3: - btr: /* btr */ - emulate_2op_SrcV_nobyte(ctxt, "btr"); - break; case 0xb6 ... 0xb7: /* movzx */ ctxt->dst.bytes = ctxt->op_bytes; ctxt->dst.val = (ctxt->d & ByteOp) ? (u8) ctxt->src.val : (u16) ctxt->src.val; break; - case 0xba: /* Grp8 */ - switch (ctxt->modrm_reg & 3) { - case 0: - goto bt; - case 1: - goto bts; - case 2: - goto btr; - case 3: - goto btc; - } - break; - case 0xbb: - btc: /* btc */ - emulate_2op_SrcV_nobyte(ctxt, "btc"); - break; - case 0xbc: { /* bsf */ - u8 zf; - __asm__ ("bsf %2, %0; setz %1" - : "=r"(ctxt->dst.val), "=q"(zf) - : "r"(ctxt->src.val)); - ctxt->eflags &= ~X86_EFLAGS_ZF; - if (zf) { - ctxt->eflags |= X86_EFLAGS_ZF; - ctxt->dst.type = OP_NONE; /* Disable writeback. */ - } - break; - } - case 0xbd: { /* bsr */ - u8 zf; - __asm__ ("bsr %2, %0; setz %1" - : "=r"(ctxt->dst.val), "=q"(zf) - : "r"(ctxt->src.val)); - ctxt->eflags &= ~X86_EFLAGS_ZF; - if (zf) { - ctxt->eflags |= X86_EFLAGS_ZF; - ctxt->dst.type = OP_NONE; /* Disable writeback. */ - } - break; - } case 0xbe ... 0xbf: /* movsx */ ctxt->dst.bytes = ctxt->op_bytes; ctxt->dst.val = (ctxt->d & ByteOp) ? (s8) ctxt->src.val : @@ -4194,9 +4213,6 @@ twobyte_insn: ctxt->dst.val = (ctxt->op_bytes == 4) ? (u32) ctxt->src.val : (u64) ctxt->src.val; break; - case 0xc7: /* Grp9 (cmpxchg8b) */ - rc = em_grp9(ctxt); - break; default: goto cannot_emulate; } diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c index 76e3f1cd0369..d68f99df690c 100644 --- a/arch/x86/kvm/i8254.c +++ b/arch/x86/kvm/i8254.c @@ -338,11 +338,15 @@ static enum hrtimer_restart pit_timer_fn(struct hrtimer *data) return HRTIMER_NORESTART; } -static void create_pit_timer(struct kvm_kpit_state *ps, u32 val, int is_period) +static void create_pit_timer(struct kvm *kvm, u32 val, int is_period) { + struct kvm_kpit_state *ps = &kvm->arch.vpit->pit_state; struct kvm_timer *pt = &ps->pit_timer; s64 interval; + if (!irqchip_in_kernel(kvm) || ps->flags & KVM_PIT_FLAGS_HPET_LEGACY) + return; + interval = muldiv64(val, NSEC_PER_SEC, KVM_PIT_FREQ); pr_debug("create pit timer, interval is %llu nsec\n", interval); @@ -393,15 +397,11 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val) case 1: /* FIXME: enhance mode 4 precision */ case 4: - if (!(ps->flags & KVM_PIT_FLAGS_HPET_LEGACY)) { - create_pit_timer(ps, val, 0); - } + create_pit_timer(kvm, val, 0); break; case 2: case 3: - if (!(ps->flags & KVM_PIT_FLAGS_HPET_LEGACY)){ - create_pit_timer(ps, val, 1); - } + create_pit_timer(kvm, val, 1); break; default: destroy_pit_timer(kvm->arch.vpit); diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c index cac4746d7ffb..b6a73537e1ef 100644 --- a/arch/x86/kvm/i8259.c +++ b/arch/x86/kvm/i8259.c @@ -262,9 +262,10 @@ int kvm_pic_read_irq(struct kvm *kvm) void kvm_pic_reset(struct kvm_kpic_state *s) { - int irq; - struct kvm_vcpu *vcpu0 = s->pics_state->kvm->bsp_vcpu; + int irq, i; + struct kvm_vcpu *vcpu; u8 irr = s->irr, isr = s->imr; + bool found = false; s->last_irr = 0; s->irr = 0; @@ -281,12 +282,19 @@ void kvm_pic_reset(struct kvm_kpic_state *s) s->special_fully_nested_mode = 0; s->init4 = 0; - for (irq = 0; irq < PIC_NUM_PINS/2; irq++) { - if (vcpu0 && kvm_apic_accept_pic_intr(vcpu0)) - if (irr & (1 << irq) || isr & (1 << irq)) { - pic_clear_isr(s, irq); - } - } + kvm_for_each_vcpu(i, vcpu, s->pics_state->kvm) + if (kvm_apic_accept_pic_intr(vcpu)) { + found = true; + break; + } + + + if (!found) + return; + + for (irq = 0; irq < PIC_NUM_PINS/2; irq++) + if (irr & (1 << irq) || isr & (1 << irq)) + pic_clear_isr(s, irq); } static void pic_ioport_write(void *opaque, u32 addr, u32 val) diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 54abb40199d6..cfdc6e0ef002 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -38,6 +38,7 @@ #include "irq.h" #include "trace.h" #include "x86.h" +#include "cpuid.h" #ifndef CONFIG_X86_64 #define mod_64(x, y) ((x) - (y) * div64_u64(x, y)) @@ -1120,7 +1121,7 @@ int apic_has_pending_timer(struct kvm_vcpu *vcpu) return 0; } -static int kvm_apic_local_deliver(struct kvm_lapic *apic, int lvt_type) +int kvm_apic_local_deliver(struct kvm_lapic *apic, int lvt_type) { u32 reg = apic_get_reg(apic, lvt_type); int vector, mode, trig_mode; diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h index 138e8cc6fea6..6f4ce2575d09 100644 --- a/arch/x86/kvm/lapic.h +++ b/arch/x86/kvm/lapic.h @@ -34,6 +34,7 @@ void kvm_apic_set_version(struct kvm_vcpu *vcpu); int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest); int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda); int kvm_apic_set_irq(struct kvm_vcpu *vcpu, struct kvm_lapic_irq *irq); +int kvm_apic_local_deliver(struct kvm_lapic *apic, int lvt_type); u64 kvm_get_apic_base(struct kvm_vcpu *vcpu); void kvm_set_apic_base(struct kvm_vcpu *vcpu, u64 data); diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index f1b36cf3e3d0..2a2a9b40db19 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -59,15 +59,6 @@ enum { AUDIT_POST_SYNC }; -char *audit_point_name[] = { - "pre page fault", - "post page fault", - "pre pte write", - "post pte write", - "pre sync", - "post sync" -}; - #undef MMU_DEBUG #ifdef MMU_DEBUG @@ -87,9 +78,6 @@ static int dbg = 0; module_param(dbg, bool, 0644); #endif -static int oos_shadow = 1; -module_param(oos_shadow, bool, 0644); - #ifndef MMU_DEBUG #define ASSERT(x) do { } while (0) #else @@ -593,6 +581,11 @@ static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache, return 0; } +static int mmu_memory_cache_free_objects(struct kvm_mmu_memory_cache *cache) +{ + return cache->nobjs; +} + static void mmu_free_memory_cache(struct kvm_mmu_memory_cache *mc, struct kmem_cache *cache) { @@ -953,21 +946,35 @@ static void pte_list_walk(unsigned long *pte_list, pte_list_walk_fn fn) } } +static unsigned long *__gfn_to_rmap(struct kvm *kvm, gfn_t gfn, int level, + struct kvm_memory_slot *slot) +{ + struct kvm_lpage_info *linfo; + + if (likely(level == PT_PAGE_TABLE_LEVEL)) + return &slot->rmap[gfn - slot->base_gfn]; + + linfo = lpage_info_slot(gfn, slot, level); + return &linfo->rmap_pde; +} + /* * Take gfn and return the reverse mapping to it. */ static unsigned long *gfn_to_rmap(struct kvm *kvm, gfn_t gfn, int level) { struct kvm_memory_slot *slot; - struct kvm_lpage_info *linfo; slot = gfn_to_memslot(kvm, gfn); - if (likely(level == PT_PAGE_TABLE_LEVEL)) - return &slot->rmap[gfn - slot->base_gfn]; + return __gfn_to_rmap(kvm, gfn, level, slot); +} - linfo = lpage_info_slot(gfn, slot, level); +static bool rmap_can_add(struct kvm_vcpu *vcpu) +{ + struct kvm_mmu_memory_cache *cache; - return &linfo->rmap_pde; + cache = &vcpu->arch.mmu_pte_list_desc_cache; + return mmu_memory_cache_free_objects(cache); } static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn) @@ -1004,17 +1011,16 @@ static void drop_spte(struct kvm *kvm, u64 *sptep) rmap_remove(kvm, sptep); } -static int rmap_write_protect(struct kvm *kvm, u64 gfn) +int kvm_mmu_rmap_write_protect(struct kvm *kvm, u64 gfn, + struct kvm_memory_slot *slot) { unsigned long *rmapp; u64 *spte; int i, write_protected = 0; - rmapp = gfn_to_rmap(kvm, gfn, PT_PAGE_TABLE_LEVEL); - + rmapp = __gfn_to_rmap(kvm, gfn, PT_PAGE_TABLE_LEVEL, slot); spte = rmap_next(kvm, rmapp, NULL); while (spte) { - BUG_ON(!spte); BUG_ON(!(*spte & PT_PRESENT_MASK)); rmap_printk("rmap_write_protect: spte %p %llx\n", spte, *spte); if (is_writable_pte(*spte)) { @@ -1027,12 +1033,11 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn) /* check for huge page mappings */ for (i = PT_DIRECTORY_LEVEL; i < PT_PAGE_TABLE_LEVEL + KVM_NR_PAGE_SIZES; ++i) { - rmapp = gfn_to_rmap(kvm, gfn, i); + rmapp = __gfn_to_rmap(kvm, gfn, i, slot); spte = rmap_next(kvm, rmapp, NULL); while (spte) { - BUG_ON(!spte); BUG_ON(!(*spte & PT_PRESENT_MASK)); - BUG_ON((*spte & (PT_PAGE_SIZE_MASK|PT_PRESENT_MASK)) != (PT_PAGE_SIZE_MASK|PT_PRESENT_MASK)); + BUG_ON(!is_large_pte(*spte)); pgprintk("rmap_write_protect(large): spte %p %llx %lld\n", spte, *spte, gfn); if (is_writable_pte(*spte)) { drop_spte(kvm, spte); @@ -1047,6 +1052,14 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn) return write_protected; } +static int rmap_write_protect(struct kvm *kvm, u64 gfn) +{ + struct kvm_memory_slot *slot; + + slot = gfn_to_memslot(kvm, gfn); + return kvm_mmu_rmap_write_protect(kvm, gfn, slot); +} + static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp, unsigned long data) { @@ -1103,15 +1116,15 @@ static int kvm_handle_hva(struct kvm *kvm, unsigned long hva, int (*handler)(struct kvm *kvm, unsigned long *rmapp, unsigned long data)) { - int i, j; + int j; int ret; int retval = 0; struct kvm_memslots *slots; + struct kvm_memory_slot *memslot; slots = kvm_memslots(kvm); - for (i = 0; i < slots->nmemslots; i++) { - struct kvm_memory_slot *memslot = &slots->memslots[i]; + kvm_for_each_memslot(memslot, slots) { unsigned long start = memslot->userspace_addr; unsigned long end; @@ -1324,7 +1337,7 @@ static struct kvm_mmu_page *kvm_mmu_alloc_page(struct kvm_vcpu *vcpu, PAGE_SIZE); set_page_private(virt_to_page(sp->spt), (unsigned long)sp); list_add(&sp->link, &vcpu->kvm->arch.active_mmu_pages); - bitmap_zero(sp->slot_bitmap, KVM_MEMORY_SLOTS + KVM_PRIVATE_MEM_SLOTS); + bitmap_zero(sp->slot_bitmap, KVM_MEM_SLOTS_NUM); sp->parent_ptes = 0; mmu_page_add_parent_pte(vcpu, sp, parent_pte); kvm_mod_used_mmu_pages(vcpu->kvm, +1); @@ -1511,6 +1524,13 @@ static int kvm_sync_page_transient(struct kvm_vcpu *vcpu, return ret; } +#ifdef CONFIG_KVM_MMU_AUDIT +#include "mmu_audit.c" +#else +static void kvm_mmu_audit(struct kvm_vcpu *vcpu, int point) { } +static void mmu_audit_disable(void) { } +#endif + static int kvm_sync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp, struct list_head *invalid_list) { @@ -1640,6 +1660,18 @@ static void init_shadow_page_table(struct kvm_mmu_page *sp) sp->spt[i] = 0ull; } +static void __clear_sp_write_flooding_count(struct kvm_mmu_page *sp) +{ + sp->write_flooding_count = 0; +} + +static void clear_sp_write_flooding_count(u64 *spte) +{ + struct kvm_mmu_page *sp = page_header(__pa(spte)); + + __clear_sp_write_flooding_count(sp); +} + static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu, gfn_t gfn, gva_t gaddr, @@ -1683,6 +1715,7 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu, } else if (sp->unsync) kvm_mmu_mark_parents_unsync(sp); + __clear_sp_write_flooding_count(sp); trace_kvm_mmu_get_page(sp, false); return sp; } @@ -1796,7 +1829,7 @@ static void validate_direct_spte(struct kvm_vcpu *vcpu, u64 *sptep, } } -static void mmu_page_zap_pte(struct kvm *kvm, struct kvm_mmu_page *sp, +static bool mmu_page_zap_pte(struct kvm *kvm, struct kvm_mmu_page *sp, u64 *spte) { u64 pte; @@ -1804,17 +1837,21 @@ static void mmu_page_zap_pte(struct kvm *kvm, struct kvm_mmu_page *sp, pte = *spte; if (is_shadow_present_pte(pte)) { - if (is_last_spte(pte, sp->role.level)) + if (is_last_spte(pte, sp->role.level)) { drop_spte(kvm, spte); - else { + if (is_large_pte(pte)) + --kvm->stat.lpages; + } else { child = page_header(pte & PT64_BASE_ADDR_MASK); drop_parent_pte(child, spte); } - } else if (is_mmio_spte(pte)) + return true; + } + + if (is_mmio_spte(pte)) mmu_spte_clear_no_track(spte); - if (is_large_pte(pte)) - --kvm->stat.lpages; + return false; } static void kvm_mmu_page_unlink_children(struct kvm *kvm, @@ -1831,15 +1868,6 @@ static void kvm_mmu_put_page(struct kvm_mmu_page *sp, u64 *parent_pte) mmu_page_remove_parent_pte(sp, parent_pte); } -static void kvm_mmu_reset_last_pte_updated(struct kvm *kvm) -{ - int i; - struct kvm_vcpu *vcpu; - - kvm_for_each_vcpu(i, vcpu, kvm) - vcpu->arch.last_pte_updated = NULL; -} - static void kvm_mmu_unlink_parents(struct kvm *kvm, struct kvm_mmu_page *sp) { u64 *parent_pte; @@ -1899,7 +1927,6 @@ static int kvm_mmu_prepare_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp, } sp->role.invalid = 1; - kvm_mmu_reset_last_pte_updated(kvm); return ret; } @@ -1985,7 +2012,7 @@ void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned int goal_nr_mmu_pages) kvm->arch.n_max_mmu_pages = goal_nr_mmu_pages; } -static int kvm_mmu_unprotect_page(struct kvm *kvm, gfn_t gfn) +int kvm_mmu_unprotect_page(struct kvm *kvm, gfn_t gfn) { struct kvm_mmu_page *sp; struct hlist_node *node; @@ -1994,7 +2021,7 @@ static int kvm_mmu_unprotect_page(struct kvm *kvm, gfn_t gfn) pgprintk("%s: looking for gfn %llx\n", __func__, gfn); r = 0; - + spin_lock(&kvm->mmu_lock); for_each_gfn_indirect_valid_sp(kvm, sp, gfn, node) { pgprintk("%s: gfn %llx role %x\n", __func__, gfn, sp->role.word); @@ -2002,22 +2029,11 @@ static int kvm_mmu_unprotect_page(struct kvm *kvm, gfn_t gfn) kvm_mmu_prepare_zap_page(kvm, sp, &invalid_list); } kvm_mmu_commit_zap_page(kvm, &invalid_list); - return r; -} - -static void mmu_unshadow(struct kvm *kvm, gfn_t gfn) -{ - struct kvm_mmu_page *sp; - struct hlist_node *node; - LIST_HEAD(invalid_list); + spin_unlock(&kvm->mmu_lock); - for_each_gfn_indirect_valid_sp(kvm, sp, gfn, node) { - pgprintk("%s: zap %llx %x\n", - __func__, gfn, sp->role.word); - kvm_mmu_prepare_zap_page(kvm, sp, &invalid_list); - } - kvm_mmu_commit_zap_page(kvm, &invalid_list); + return r; } +EXPORT_SYMBOL_GPL(kvm_mmu_unprotect_page); static void page_header_update_slot(struct kvm *kvm, void *pte, gfn_t gfn) { @@ -2169,8 +2185,6 @@ static int mmu_need_write_protect(struct kvm_vcpu *vcpu, gfn_t gfn, return 1; if (!need_unsync && !s->unsync) { - if (!oos_shadow) - return 1; need_unsync = true; } } @@ -2191,11 +2205,6 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep, if (set_mmio_spte(sptep, gfn, pfn, pte_access)) return 0; - /* - * We don't set the accessed bit, since we sometimes want to see - * whether the guest actually used the pte (in order to detect - * demand paging). - */ spte = PT_PRESENT_MASK; if (!speculative) spte |= shadow_accessed_mask; @@ -2346,10 +2355,6 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep, } } kvm_release_pfn_clean(pfn); - if (speculative) { - vcpu->arch.last_pte_updated = sptep; - vcpu->arch.last_pte_gfn = gfn; - } } static void nonpaging_new_cr3(struct kvm_vcpu *vcpu) @@ -2840,12 +2845,12 @@ static void mmu_sync_roots(struct kvm_vcpu *vcpu) return; vcpu_clear_mmio_info(vcpu, ~0ul); - trace_kvm_mmu_audit(vcpu, AUDIT_PRE_SYNC); + kvm_mmu_audit(vcpu, AUDIT_PRE_SYNC); if (vcpu->arch.mmu.root_level == PT64_ROOT_LEVEL) { hpa_t root = vcpu->arch.mmu.root_hpa; sp = page_header(root); mmu_sync_children(vcpu, sp); - trace_kvm_mmu_audit(vcpu, AUDIT_POST_SYNC); + kvm_mmu_audit(vcpu, AUDIT_POST_SYNC); return; } for (i = 0; i < 4; ++i) { @@ -2857,7 +2862,7 @@ static void mmu_sync_roots(struct kvm_vcpu *vcpu) mmu_sync_children(vcpu, sp); } } - trace_kvm_mmu_audit(vcpu, AUDIT_POST_SYNC); + kvm_mmu_audit(vcpu, AUDIT_POST_SYNC); } void kvm_mmu_sync_roots(struct kvm_vcpu *vcpu) @@ -3510,28 +3515,119 @@ static void mmu_pte_write_flush_tlb(struct kvm_vcpu *vcpu, bool zap_page, kvm_mmu_flush_tlb(vcpu); } -static bool last_updated_pte_accessed(struct kvm_vcpu *vcpu) +static u64 mmu_pte_write_fetch_gpte(struct kvm_vcpu *vcpu, gpa_t *gpa, + const u8 *new, int *bytes) { - u64 *spte = vcpu->arch.last_pte_updated; + u64 gentry; + int r; + + /* + * Assume that the pte write on a page table of the same type + * as the current vcpu paging mode since we update the sptes only + * when they have the same mode. + */ + if (is_pae(vcpu) && *bytes == 4) { + /* Handle a 32-bit guest writing two halves of a 64-bit gpte */ + *gpa &= ~(gpa_t)7; + *bytes = 8; + r = kvm_read_guest(vcpu->kvm, *gpa, &gentry, min(*bytes, 8)); + if (r) + gentry = 0; + new = (const u8 *)&gentry; + } - return !!(spte && (*spte & shadow_accessed_mask)); + switch (*bytes) { + case 4: + gentry = *(const u32 *)new; + break; + case 8: + gentry = *(const u64 *)new; + break; + default: + gentry = 0; + break; + } + + return gentry; } -static void kvm_mmu_access_page(struct kvm_vcpu *vcpu, gfn_t gfn) +/* + * If we're seeing too many writes to a page, it may no longer be a page table, + * or we may be forking, in which case it is better to unmap the page. + */ +static bool detect_write_flooding(struct kvm_mmu_page *sp, u64 *spte) { - u64 *spte = vcpu->arch.last_pte_updated; + /* + * Skip write-flooding detected for the sp whose level is 1, because + * it can become unsync, then the guest page is not write-protected. + */ + if (sp->role.level == 1) + return false; - if (spte - && vcpu->arch.last_pte_gfn == gfn - && shadow_accessed_mask - && !(*spte & shadow_accessed_mask) - && is_shadow_present_pte(*spte)) - set_bit(PT_ACCESSED_SHIFT, (unsigned long *)spte); + return ++sp->write_flooding_count >= 3; +} + +/* + * Misaligned accesses are too much trouble to fix up; also, they usually + * indicate a page is not used as a page table. + */ +static bool detect_write_misaligned(struct kvm_mmu_page *sp, gpa_t gpa, + int bytes) +{ + unsigned offset, pte_size, misaligned; + + pgprintk("misaligned: gpa %llx bytes %d role %x\n", + gpa, bytes, sp->role.word); + + offset = offset_in_page(gpa); + pte_size = sp->role.cr4_pae ? 8 : 4; + + /* + * Sometimes, the OS only writes the last one bytes to update status + * bits, for example, in linux, andb instruction is used in clear_bit(). + */ + if (!(offset & (pte_size - 1)) && bytes == 1) + return false; + + misaligned = (offset ^ (offset + bytes - 1)) & ~(pte_size - 1); + misaligned |= bytes < 4; + + return misaligned; +} + +static u64 *get_written_sptes(struct kvm_mmu_page *sp, gpa_t gpa, int *nspte) +{ + unsigned page_offset, quadrant; + u64 *spte; + int level; + + page_offset = offset_in_page(gpa); + level = sp->role.level; + *nspte = 1; + if (!sp->role.cr4_pae) { + page_offset <<= 1; /* 32->64 */ + /* + * A 32-bit pde maps 4MB while the shadow pdes map + * only 2MB. So we need to double the offset again + * and zap two pdes instead of one. + */ + if (level == PT32_ROOT_LEVEL) { + page_offset &= ~7; /* kill rounding error */ + page_offset <<= 1; + *nspte = 2; + } + quadrant = page_offset >> PAGE_SHIFT; + page_offset &= ~PAGE_MASK; + if (quadrant != sp->role.quadrant) + return NULL; + } + + spte = &sp->spt[page_offset / sizeof(*spte)]; + return spte; } void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa, - const u8 *new, int bytes, - bool guest_initiated) + const u8 *new, int bytes) { gfn_t gfn = gpa >> PAGE_SHIFT; union kvm_mmu_page_role mask = { .word = 0 }; @@ -3539,8 +3635,7 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa, struct hlist_node *node; LIST_HEAD(invalid_list); u64 entry, gentry, *spte; - unsigned pte_size, page_offset, misaligned, quadrant, offset; - int level, npte, invlpg_counter, r, flooded = 0; + int npte; bool remote_flush, local_flush, zap_page; /* @@ -3551,112 +3646,45 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa, return; zap_page = remote_flush = local_flush = false; - offset = offset_in_page(gpa); pgprintk("%s: gpa %llx bytes %d\n", __func__, gpa, bytes); - invlpg_counter = atomic_read(&vcpu->kvm->arch.invlpg_counter); + gentry = mmu_pte_write_fetch_gpte(vcpu, &gpa, new, &bytes); /* - * Assume that the pte write on a page table of the same type - * as the current vcpu paging mode since we update the sptes only - * when they have the same mode. + * No need to care whether allocation memory is successful + * or not since pte prefetch is skiped if it does not have + * enough objects in the cache. */ - if ((is_pae(vcpu) && bytes == 4) || !new) { - /* Handle a 32-bit guest writing two halves of a 64-bit gpte */ - if (is_pae(vcpu)) { - gpa &= ~(gpa_t)7; - bytes = 8; - } - r = kvm_read_guest(vcpu->kvm, gpa, &gentry, min(bytes, 8)); - if (r) - gentry = 0; - new = (const u8 *)&gentry; - } - - switch (bytes) { - case 4: - gentry = *(const u32 *)new; - break; - case 8: - gentry = *(const u64 *)new; - break; - default: - gentry = 0; - break; - } + mmu_topup_memory_caches(vcpu); spin_lock(&vcpu->kvm->mmu_lock); - if (atomic_read(&vcpu->kvm->arch.invlpg_counter) != invlpg_counter) - gentry = 0; - kvm_mmu_free_some_pages(vcpu); ++vcpu->kvm->stat.mmu_pte_write; - trace_kvm_mmu_audit(vcpu, AUDIT_PRE_PTE_WRITE); - if (guest_initiated) { - kvm_mmu_access_page(vcpu, gfn); - if (gfn == vcpu->arch.last_pt_write_gfn - && !last_updated_pte_accessed(vcpu)) { - ++vcpu->arch.last_pt_write_count; - if (vcpu->arch.last_pt_write_count >= 3) - flooded = 1; - } else { - vcpu->arch.last_pt_write_gfn = gfn; - vcpu->arch.last_pt_write_count = 1; - vcpu->arch.last_pte_updated = NULL; - } - } + kvm_mmu_audit(vcpu, AUDIT_PRE_PTE_WRITE); mask.cr0_wp = mask.cr4_pae = mask.nxe = 1; for_each_gfn_indirect_valid_sp(vcpu->kvm, sp, gfn, node) { - pte_size = sp->role.cr4_pae ? 8 : 4; - misaligned = (offset ^ (offset + bytes - 1)) & ~(pte_size - 1); - misaligned |= bytes < 4; - if (misaligned || flooded) { - /* - * Misaligned accesses are too much trouble to fix - * up; also, they usually indicate a page is not used - * as a page table. - * - * If we're seeing too many writes to a page, - * it may no longer be a page table, or we may be - * forking, in which case it is better to unmap the - * page. - */ - pgprintk("misaligned: gpa %llx bytes %d role %x\n", - gpa, bytes, sp->role.word); + spte = get_written_sptes(sp, gpa, &npte); + + if (detect_write_misaligned(sp, gpa, bytes) || + detect_write_flooding(sp, spte)) { zap_page |= !!kvm_mmu_prepare_zap_page(vcpu->kvm, sp, &invalid_list); ++vcpu->kvm->stat.mmu_flooded; continue; } - page_offset = offset; - level = sp->role.level; - npte = 1; - if (!sp->role.cr4_pae) { - page_offset <<= 1; /* 32->64 */ - /* - * A 32-bit pde maps 4MB while the shadow pdes map - * only 2MB. So we need to double the offset again - * and zap two pdes instead of one. - */ - if (level == PT32_ROOT_LEVEL) { - page_offset &= ~7; /* kill rounding error */ - page_offset <<= 1; - npte = 2; - } - quadrant = page_offset >> PAGE_SHIFT; - page_offset &= ~PAGE_MASK; - if (quadrant != sp->role.quadrant) - continue; - } + + spte = get_written_sptes(sp, gpa, &npte); + if (!spte) + continue; + local_flush = true; - spte = &sp->spt[page_offset / sizeof(*spte)]; while (npte--) { entry = *spte; mmu_page_zap_pte(vcpu->kvm, sp, spte); if (gentry && !((sp->role.word ^ vcpu->arch.mmu.base_role.word) - & mask.word)) + & mask.word) && rmap_can_add(vcpu)) mmu_pte_write_new_pte(vcpu, sp, spte, &gentry); if (!remote_flush && need_remote_flush(entry, *spte)) remote_flush = true; @@ -3665,7 +3693,7 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa, } mmu_pte_write_flush_tlb(vcpu, zap_page, remote_flush, local_flush); kvm_mmu_commit_zap_page(vcpu->kvm, &invalid_list); - trace_kvm_mmu_audit(vcpu, AUDIT_POST_PTE_WRITE); + kvm_mmu_audit(vcpu, AUDIT_POST_PTE_WRITE); spin_unlock(&vcpu->kvm->mmu_lock); } @@ -3679,9 +3707,8 @@ int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva) gpa = kvm_mmu_gva_to_gpa_read(vcpu, gva, NULL); - spin_lock(&vcpu->kvm->mmu_lock); r = kvm_mmu_unprotect_page(vcpu->kvm, gpa >> PAGE_SHIFT); - spin_unlock(&vcpu->kvm->mmu_lock); + return r; } EXPORT_SYMBOL_GPL(kvm_mmu_unprotect_page_virt); @@ -3702,10 +3729,18 @@ void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu) kvm_mmu_commit_zap_page(vcpu->kvm, &invalid_list); } +static bool is_mmio_page_fault(struct kvm_vcpu *vcpu, gva_t addr) +{ + if (vcpu->arch.mmu.direct_map || mmu_is_nested(vcpu)) + return vcpu_match_mmio_gpa(vcpu, addr); + + return vcpu_match_mmio_gva(vcpu, addr); +} + int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t cr2, u32 error_code, void *insn, int insn_len) { - int r; + int r, emulation_type = EMULTYPE_RETRY; enum emulation_result er; r = vcpu->arch.mmu.page_fault(vcpu, cr2, error_code, false); @@ -3717,11 +3752,10 @@ int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t cr2, u32 error_code, goto out; } - r = mmu_topup_memory_caches(vcpu); - if (r) - goto out; + if (is_mmio_page_fault(vcpu, cr2)) + emulation_type = 0; - er = x86_emulate_instruction(vcpu, cr2, 0, insn, insn_len); + er = x86_emulate_instruction(vcpu, cr2, emulation_type, insn, insn_len); switch (er) { case EMULATE_DONE: @@ -3792,7 +3826,11 @@ static int alloc_mmu_pages(struct kvm_vcpu *vcpu) int kvm_mmu_create(struct kvm_vcpu *vcpu) { ASSERT(vcpu); - ASSERT(!VALID_PAGE(vcpu->arch.mmu.root_hpa)); + + vcpu->arch.walk_mmu = &vcpu->arch.mmu; + vcpu->arch.mmu.root_hpa = INVALID_PAGE; + vcpu->arch.mmu.translate_gpa = translate_gpa; + vcpu->arch.nested_mmu.translate_gpa = translate_nested_gpa; return alloc_mmu_pages(vcpu); } @@ -3852,14 +3890,14 @@ restart: spin_unlock(&kvm->mmu_lock); } -static int kvm_mmu_remove_some_alloc_mmu_pages(struct kvm *kvm, - struct list_head *invalid_list) +static void kvm_mmu_remove_some_alloc_mmu_pages(struct kvm *kvm, + struct list_head *invalid_list) { struct kvm_mmu_page *page; page = container_of(kvm->arch.active_mmu_pages.prev, struct kvm_mmu_page, link); - return kvm_mmu_prepare_zap_page(kvm, page, invalid_list); + kvm_mmu_prepare_zap_page(kvm, page, invalid_list); } static int mmu_shrink(struct shrinker *shrink, struct shrink_control *sc) @@ -3874,15 +3912,15 @@ static int mmu_shrink(struct shrinker *shrink, struct shrink_control *sc) raw_spin_lock(&kvm_lock); list_for_each_entry(kvm, &vm_list, vm_list) { - int idx, freed_pages; + int idx; LIST_HEAD(invalid_list); idx = srcu_read_lock(&kvm->srcu); spin_lock(&kvm->mmu_lock); if (!kvm_freed && nr_to_scan > 0 && kvm->arch.n_used_mmu_pages > 0) { - freed_pages = kvm_mmu_remove_some_alloc_mmu_pages(kvm, - &invalid_list); + kvm_mmu_remove_some_alloc_mmu_pages(kvm, + &invalid_list); kvm_freed = kvm; } nr_to_scan--; @@ -3944,15 +3982,15 @@ nomem: */ unsigned int kvm_mmu_calculate_mmu_pages(struct kvm *kvm) { - int i; unsigned int nr_mmu_pages; unsigned int nr_pages = 0; struct kvm_memslots *slots; + struct kvm_memory_slot *memslot; slots = kvm_memslots(kvm); - for (i = 0; i < slots->nmemslots; i++) - nr_pages += slots->memslots[i].npages; + kvm_for_each_memslot(memslot, slots) + nr_pages += memslot->npages; nr_mmu_pages = nr_pages * KVM_PERMILLE_MMU_PAGES / 1000; nr_mmu_pages = max(nr_mmu_pages, @@ -3961,127 +3999,6 @@ unsigned int kvm_mmu_calculate_mmu_pages(struct kvm *kvm) return nr_mmu_pages; } -static void *pv_mmu_peek_buffer(struct kvm_pv_mmu_op_buffer *buffer, - unsigned len) -{ - if (len > buffer->len) - return NULL; - return buffer->ptr; -} - -static void *pv_mmu_read_buffer(struct kvm_pv_mmu_op_buffer *buffer, - unsigned len) -{ - void *ret; - - ret = pv_mmu_peek_buffer(buffer, len); - if (!ret) - return ret; - buffer->ptr += len; - buffer->len -= len; - buffer->processed += len; - return ret; -} - -static int kvm_pv_mmu_write(struct kvm_vcpu *vcpu, - gpa_t addr, gpa_t value) -{ - int bytes = 8; - int r; - - if (!is_long_mode(vcpu) && !is_pae(vcpu)) - bytes = 4; - - r = mmu_topup_memory_caches(vcpu); - if (r) - return r; - - if (!emulator_write_phys(vcpu, addr, &value, bytes)) - return -EFAULT; - - return 1; -} - -static int kvm_pv_mmu_flush_tlb(struct kvm_vcpu *vcpu) -{ - (void)kvm_set_cr3(vcpu, kvm_read_cr3(vcpu)); - return 1; -} - -static int kvm_pv_mmu_release_pt(struct kvm_vcpu *vcpu, gpa_t addr) -{ - spin_lock(&vcpu->kvm->mmu_lock); - mmu_unshadow(vcpu->kvm, addr >> PAGE_SHIFT); - spin_unlock(&vcpu->kvm->mmu_lock); - return 1; -} - -static int kvm_pv_mmu_op_one(struct kvm_vcpu *vcpu, - struct kvm_pv_mmu_op_buffer *buffer) -{ - struct kvm_mmu_op_header *header; - - header = pv_mmu_peek_buffer(buffer, sizeof *header); - if (!header) - return 0; - switch (header->op) { - case KVM_MMU_OP_WRITE_PTE: { - struct kvm_mmu_op_write_pte *wpte; - - wpte = pv_mmu_read_buffer(buffer, sizeof *wpte); - if (!wpte) - return 0; - return kvm_pv_mmu_write(vcpu, wpte->pte_phys, - wpte->pte_val); - } - case KVM_MMU_OP_FLUSH_TLB: { - struct kvm_mmu_op_flush_tlb *ftlb; - - ftlb = pv_mmu_read_buffer(buffer, sizeof *ftlb); - if (!ftlb) - return 0; - return kvm_pv_mmu_flush_tlb(vcpu); - } - case KVM_MMU_OP_RELEASE_PT: { - struct kvm_mmu_op_release_pt *rpt; - - rpt = pv_mmu_read_buffer(buffer, sizeof *rpt); - if (!rpt) - return 0; - return kvm_pv_mmu_release_pt(vcpu, rpt->pt_phys); - } - default: return 0; - } -} - -int kvm_pv_mmu_op(struct kvm_vcpu *vcpu, unsigned long bytes, - gpa_t addr, unsigned long *ret) -{ - int r; - struct kvm_pv_mmu_op_buffer *buffer = &vcpu->arch.mmu_op_buffer; - - buffer->ptr = buffer->buf; - buffer->len = min_t(unsigned long, bytes, sizeof buffer->buf); - buffer->processed = 0; - - r = kvm_read_guest(vcpu->kvm, addr, buffer->buf, buffer->len); - if (r) - goto out; - - while (buffer->len) { - r = kvm_pv_mmu_op_one(vcpu, buffer); - if (r < 0) - goto out; - if (r == 0) - break; - } - - r = 1; -out: - *ret = buffer->processed; - return r; -} - int kvm_mmu_get_spte_hierarchy(struct kvm_vcpu *vcpu, u64 addr, u64 sptes[4]) { struct kvm_shadow_walk_iterator iterator; @@ -4110,12 +4027,6 @@ void kvm_mmu_destroy(struct kvm_vcpu *vcpu) mmu_free_memory_caches(vcpu); } -#ifdef CONFIG_KVM_MMU_AUDIT -#include "mmu_audit.c" -#else -static void mmu_audit_disable(void) { } -#endif - void kvm_mmu_module_exit(void) { mmu_destroy_caches(); diff --git a/arch/x86/kvm/mmu_audit.c b/arch/x86/kvm/mmu_audit.c index 746ec259d024..fe15dcc07a6b 100644 --- a/arch/x86/kvm/mmu_audit.c +++ b/arch/x86/kvm/mmu_audit.c @@ -19,6 +19,15 @@ #include <linux/ratelimit.h> +char const *audit_point_name[] = { + "pre page fault", + "post page fault", + "pre pte write", + "post pte write", + "pre sync", + "post sync" +}; + #define audit_printk(kvm, fmt, args...) \ printk(KERN_ERR "audit: (%s) error: " \ fmt, audit_point_name[kvm->arch.audit_point], ##args) @@ -224,7 +233,10 @@ static void audit_vcpu_spte(struct kvm_vcpu *vcpu) mmu_spte_walk(vcpu, audit_spte); } -static void kvm_mmu_audit(void *ignore, struct kvm_vcpu *vcpu, int point) +static bool mmu_audit; +static struct jump_label_key mmu_audit_key; + +static void __kvm_mmu_audit(struct kvm_vcpu *vcpu, int point) { static DEFINE_RATELIMIT_STATE(ratelimit_state, 5 * HZ, 10); @@ -236,18 +248,18 @@ static void kvm_mmu_audit(void *ignore, struct kvm_vcpu *vcpu, int point) audit_vcpu_spte(vcpu); } -static bool mmu_audit; +static inline void kvm_mmu_audit(struct kvm_vcpu *vcpu, int point) +{ + if (static_branch((&mmu_audit_key))) + __kvm_mmu_audit(vcpu, point); +} static void mmu_audit_enable(void) { - int ret; - if (mmu_audit) return; - ret = register_trace_kvm_mmu_audit(kvm_mmu_audit, NULL); - WARN_ON(ret); - + jump_label_inc(&mmu_audit_key); mmu_audit = true; } @@ -256,8 +268,7 @@ static void mmu_audit_disable(void) if (!mmu_audit) return; - unregister_trace_kvm_mmu_audit(kvm_mmu_audit, NULL); - tracepoint_synchronize_unregister(); + jump_label_dec(&mmu_audit_key); mmu_audit = false; } diff --git a/arch/x86/kvm/mmutrace.h b/arch/x86/kvm/mmutrace.h index eed67f34146d..89fb0e81322a 100644 --- a/arch/x86/kvm/mmutrace.h +++ b/arch/x86/kvm/mmutrace.h @@ -243,25 +243,6 @@ TRACE_EVENT( TP_printk("addr:%llx gfn %llx access %x", __entry->addr, __entry->gfn, __entry->access) ); - -TRACE_EVENT( - kvm_mmu_audit, - TP_PROTO(struct kvm_vcpu *vcpu, int audit_point), - TP_ARGS(vcpu, audit_point), - - TP_STRUCT__entry( - __field(struct kvm_vcpu *, vcpu) - __field(int, audit_point) - ), - - TP_fast_assign( - __entry->vcpu = vcpu; - __entry->audit_point = audit_point; - ), - - TP_printk("vcpu:%d %s", __entry->vcpu->cpu, - audit_point_name[__entry->audit_point]) -); #endif /* _TRACE_KVMMMU_H */ #undef TRACE_INCLUDE_PATH diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index 92994100638b..15610285ebb6 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -497,6 +497,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr, shadow_walk_next(&it)) { gfn_t table_gfn; + clear_sp_write_flooding_count(it.sptep); drop_large_spte(vcpu, it.sptep); sp = NULL; @@ -522,6 +523,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr, shadow_walk_next(&it)) { gfn_t direct_gfn; + clear_sp_write_flooding_count(it.sptep); validate_direct_spte(vcpu, it.sptep, direct_access); drop_large_spte(vcpu, it.sptep); @@ -536,6 +538,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr, link_shadow_page(it.sptep, sp); } + clear_sp_write_flooding_count(it.sptep); mmu_set_spte(vcpu, it.sptep, access, gw->pte_access, user_fault, write_fault, emulate, it.level, gw->gfn, pfn, prefault, map_writable); @@ -599,11 +602,9 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, u32 error_code, */ if (!r) { pgprintk("%s: guest page fault\n", __func__); - if (!prefault) { + if (!prefault) inject_page_fault(vcpu, &walker.fault); - /* reset fork detector */ - vcpu->arch.last_pt_write_count = 0; - } + return 0; } @@ -631,7 +632,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, u32 error_code, if (mmu_notifier_retry(vcpu, mmu_seq)) goto out_unlock; - trace_kvm_mmu_audit(vcpu, AUDIT_PRE_PAGE_FAULT); + kvm_mmu_audit(vcpu, AUDIT_PRE_PAGE_FAULT); kvm_mmu_free_some_pages(vcpu); if (!force_pt_level) transparent_hugepage_adjust(vcpu, &walker.gfn, &pfn, &level); @@ -641,11 +642,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, u32 error_code, pgprintk("%s: shadow pte %p %llx emulate %d\n", __func__, sptep, *sptep, emulate); - if (!emulate) - vcpu->arch.last_pt_write_count = 0; /* reset fork detector */ - ++vcpu->stat.pf_fixed; - trace_kvm_mmu_audit(vcpu, AUDIT_POST_PAGE_FAULT); + kvm_mmu_audit(vcpu, AUDIT_POST_PAGE_FAULT); spin_unlock(&vcpu->kvm->mmu_lock); return emulate; @@ -656,65 +654,66 @@ out_unlock: return 0; } +static gpa_t FNAME(get_level1_sp_gpa)(struct kvm_mmu_page *sp) +{ + int offset = 0; + + WARN_ON(sp->role.level != 1); + + if (PTTYPE == 32) + offset = sp->role.quadrant << PT64_LEVEL_BITS; + + return gfn_to_gpa(sp->gfn) + offset * sizeof(pt_element_t); +} + static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva) { struct kvm_shadow_walk_iterator iterator; struct kvm_mmu_page *sp; - gpa_t pte_gpa = -1; int level; u64 *sptep; - int need_flush = 0; vcpu_clear_mmio_info(vcpu, gva); - spin_lock(&vcpu->kvm->mmu_lock); + /* + * No need to check return value here, rmap_can_add() can + * help us to skip pte prefetch later. + */ + mmu_topup_memory_caches(vcpu); + spin_lock(&vcpu->kvm->mmu_lock); for_each_shadow_entry(vcpu, gva, iterator) { level = iterator.level; sptep = iterator.sptep; sp = page_header(__pa(sptep)); if (is_last_spte(*sptep, level)) { - int offset, shift; + pt_element_t gpte; + gpa_t pte_gpa; if (!sp->unsync) break; - shift = PAGE_SHIFT - - (PT_LEVEL_BITS - PT64_LEVEL_BITS) * level; - offset = sp->role.quadrant << shift; - - pte_gpa = (sp->gfn << PAGE_SHIFT) + offset; + pte_gpa = FNAME(get_level1_sp_gpa)(sp); pte_gpa += (sptep - sp->spt) * sizeof(pt_element_t); - if (is_shadow_present_pte(*sptep)) { - if (is_large_pte(*sptep)) - --vcpu->kvm->stat.lpages; - drop_spte(vcpu->kvm, sptep); - need_flush = 1; - } else if (is_mmio_spte(*sptep)) - mmu_spte_clear_no_track(sptep); + if (mmu_page_zap_pte(vcpu->kvm, sp, sptep)) + kvm_flush_remote_tlbs(vcpu->kvm); - break; + if (!rmap_can_add(vcpu)) + break; + + if (kvm_read_guest_atomic(vcpu->kvm, pte_gpa, &gpte, + sizeof(pt_element_t))) + break; + + FNAME(update_pte)(vcpu, sp, sptep, &gpte); } if (!is_shadow_present_pte(*sptep) || !sp->unsync_children) break; } - - if (need_flush) - kvm_flush_remote_tlbs(vcpu->kvm); - - atomic_inc(&vcpu->kvm->arch.invlpg_counter); - spin_unlock(&vcpu->kvm->mmu_lock); - - if (pte_gpa == -1) - return; - - if (mmu_topup_memory_caches(vcpu)) - return; - kvm_mmu_pte_write(vcpu, pte_gpa, NULL, sizeof(pt_element_t), 0); } static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr, u32 access, @@ -769,19 +768,14 @@ static gpa_t FNAME(gva_to_gpa_nested)(struct kvm_vcpu *vcpu, gva_t vaddr, */ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp) { - int i, offset, nr_present; + int i, nr_present = 0; bool host_writable; gpa_t first_pte_gpa; - offset = nr_present = 0; - /* direct kvm_mmu_page can not be unsync. */ BUG_ON(sp->role.direct); - if (PTTYPE == 32) - offset = sp->role.quadrant << PT64_LEVEL_BITS; - - first_pte_gpa = gfn_to_gpa(sp->gfn) + offset * sizeof(pt_element_t); + first_pte_gpa = FNAME(get_level1_sp_gpa)(sp); for (i = 0; i < PT64_ENT_PER_PAGE; i++) { unsigned pte_access; diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c new file mode 100644 index 000000000000..7aad5446f393 --- /dev/null +++ b/arch/x86/kvm/pmu.c @@ -0,0 +1,533 @@ +/* + * Kernel-based Virtual Machine -- Performane Monitoring Unit support + * + * Copyright 2011 Red Hat, Inc. and/or its affiliates. + * + * Authors: + * Avi Kivity <avi@redhat.com> + * Gleb Natapov <gleb@redhat.com> + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + * + */ + +#include <linux/types.h> +#include <linux/kvm_host.h> +#include <linux/perf_event.h> +#include "x86.h" +#include "cpuid.h" +#include "lapic.h" + +static struct kvm_arch_event_perf_mapping { + u8 eventsel; + u8 unit_mask; + unsigned event_type; + bool inexact; +} arch_events[] = { + /* Index must match CPUID 0x0A.EBX bit vector */ + [0] = { 0x3c, 0x00, PERF_COUNT_HW_CPU_CYCLES }, + [1] = { 0xc0, 0x00, PERF_COUNT_HW_INSTRUCTIONS }, + [2] = { 0x3c, 0x01, PERF_COUNT_HW_BUS_CYCLES }, + [3] = { 0x2e, 0x4f, PERF_COUNT_HW_CACHE_REFERENCES }, + [4] = { 0x2e, 0x41, PERF_COUNT_HW_CACHE_MISSES }, + [5] = { 0xc4, 0x00, PERF_COUNT_HW_BRANCH_INSTRUCTIONS }, + [6] = { 0xc5, 0x00, PERF_COUNT_HW_BRANCH_MISSES }, +}; + +/* mapping between fixed pmc index and arch_events array */ +int fixed_pmc_events[] = {1, 0, 2}; + +static bool pmc_is_gp(struct kvm_pmc *pmc) +{ + return pmc->type == KVM_PMC_GP; +} + +static inline u64 pmc_bitmask(struct kvm_pmc *pmc) +{ + struct kvm_pmu *pmu = &pmc->vcpu->arch.pmu; + + return pmu->counter_bitmask[pmc->type]; +} + +static inline bool pmc_enabled(struct kvm_pmc *pmc) +{ + struct kvm_pmu *pmu = &pmc->vcpu->arch.pmu; + return test_bit(pmc->idx, (unsigned long *)&pmu->global_ctrl); +} + +static inline struct kvm_pmc *get_gp_pmc(struct kvm_pmu *pmu, u32 msr, + u32 base) +{ + if (msr >= base && msr < base + pmu->nr_arch_gp_counters) + return &pmu->gp_counters[msr - base]; + return NULL; +} + +static inline struct kvm_pmc *get_fixed_pmc(struct kvm_pmu *pmu, u32 msr) +{ + int base = MSR_CORE_PERF_FIXED_CTR0; + if (msr >= base && msr < base + pmu->nr_arch_fixed_counters) + return &pmu->fixed_counters[msr - base]; + return NULL; +} + +static inline struct kvm_pmc *get_fixed_pmc_idx(struct kvm_pmu *pmu, int idx) +{ + return get_fixed_pmc(pmu, MSR_CORE_PERF_FIXED_CTR0 + idx); +} + +static struct kvm_pmc *global_idx_to_pmc(struct kvm_pmu *pmu, int idx) +{ + if (idx < X86_PMC_IDX_FIXED) + return get_gp_pmc(pmu, MSR_P6_EVNTSEL0 + idx, MSR_P6_EVNTSEL0); + else + return get_fixed_pmc_idx(pmu, idx - X86_PMC_IDX_FIXED); +} + +void kvm_deliver_pmi(struct kvm_vcpu *vcpu) +{ + if (vcpu->arch.apic) + kvm_apic_local_deliver(vcpu->arch.apic, APIC_LVTPC); +} + +static void trigger_pmi(struct irq_work *irq_work) +{ + struct kvm_pmu *pmu = container_of(irq_work, struct kvm_pmu, + irq_work); + struct kvm_vcpu *vcpu = container_of(pmu, struct kvm_vcpu, + arch.pmu); + + kvm_deliver_pmi(vcpu); +} + +static void kvm_perf_overflow(struct perf_event *perf_event, + struct perf_sample_data *data, + struct pt_regs *regs) +{ + struct kvm_pmc *pmc = perf_event->overflow_handler_context; + struct kvm_pmu *pmu = &pmc->vcpu->arch.pmu; + __set_bit(pmc->idx, (unsigned long *)&pmu->global_status); +} + +static void kvm_perf_overflow_intr(struct perf_event *perf_event, + struct perf_sample_data *data, struct pt_regs *regs) +{ + struct kvm_pmc *pmc = perf_event->overflow_handler_context; + struct kvm_pmu *pmu = &pmc->vcpu->arch.pmu; + if (!test_and_set_bit(pmc->idx, (unsigned long *)&pmu->reprogram_pmi)) { + kvm_perf_overflow(perf_event, data, regs); + kvm_make_request(KVM_REQ_PMU, pmc->vcpu); + /* + * Inject PMI. If vcpu was in a guest mode during NMI PMI + * can be ejected on a guest mode re-entry. Otherwise we can't + * be sure that vcpu wasn't executing hlt instruction at the + * time of vmexit and is not going to re-enter guest mode until, + * woken up. So we should wake it, but this is impossible from + * NMI context. Do it from irq work instead. + */ + if (!kvm_is_in_guest()) + irq_work_queue(&pmc->vcpu->arch.pmu.irq_work); + else + kvm_make_request(KVM_REQ_PMI, pmc->vcpu); + } +} + +static u64 read_pmc(struct kvm_pmc *pmc) +{ + u64 counter, enabled, running; + + counter = pmc->counter; + + if (pmc->perf_event) + counter += perf_event_read_value(pmc->perf_event, + &enabled, &running); + + /* FIXME: Scaling needed? */ + + return counter & pmc_bitmask(pmc); +} + +static void stop_counter(struct kvm_pmc *pmc) +{ + if (pmc->perf_event) { + pmc->counter = read_pmc(pmc); + perf_event_release_kernel(pmc->perf_event); + pmc->perf_event = NULL; + } +} + +static void reprogram_counter(struct kvm_pmc *pmc, u32 type, + unsigned config, bool exclude_user, bool exclude_kernel, + bool intr) +{ + struct perf_event *event; + struct perf_event_attr attr = { + .type = type, + .size = sizeof(attr), + .pinned = true, + .exclude_idle = true, + .exclude_host = 1, + .exclude_user = exclude_user, + .exclude_kernel = exclude_kernel, + .config = config, + }; + + attr.sample_period = (-pmc->counter) & pmc_bitmask(pmc); + + event = perf_event_create_kernel_counter(&attr, -1, current, + intr ? kvm_perf_overflow_intr : + kvm_perf_overflow, pmc); + if (IS_ERR(event)) { + printk_once("kvm: pmu event creation failed %ld\n", + PTR_ERR(event)); + return; + } + + pmc->perf_event = event; + clear_bit(pmc->idx, (unsigned long*)&pmc->vcpu->arch.pmu.reprogram_pmi); +} + +static unsigned find_arch_event(struct kvm_pmu *pmu, u8 event_select, + u8 unit_mask) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(arch_events); i++) + if (arch_events[i].eventsel == event_select + && arch_events[i].unit_mask == unit_mask + && (pmu->available_event_types & (1 << i))) + break; + + if (i == ARRAY_SIZE(arch_events)) + return PERF_COUNT_HW_MAX; + + return arch_events[i].event_type; +} + +static void reprogram_gp_counter(struct kvm_pmc *pmc, u64 eventsel) +{ + unsigned config, type = PERF_TYPE_RAW; + u8 event_select, unit_mask; + + pmc->eventsel = eventsel; + + stop_counter(pmc); + + if (!(eventsel & ARCH_PERFMON_EVENTSEL_ENABLE) || !pmc_enabled(pmc)) + return; + + event_select = eventsel & ARCH_PERFMON_EVENTSEL_EVENT; + unit_mask = (eventsel & ARCH_PERFMON_EVENTSEL_UMASK) >> 8; + + if (!(event_select & (ARCH_PERFMON_EVENTSEL_EDGE | + ARCH_PERFMON_EVENTSEL_INV | + ARCH_PERFMON_EVENTSEL_CMASK))) { + config = find_arch_event(&pmc->vcpu->arch.pmu, event_select, + unit_mask); + if (config != PERF_COUNT_HW_MAX) + type = PERF_TYPE_HARDWARE; + } + + if (type == PERF_TYPE_RAW) + config = eventsel & X86_RAW_EVENT_MASK; + + reprogram_counter(pmc, type, config, + !(eventsel & ARCH_PERFMON_EVENTSEL_USR), + !(eventsel & ARCH_PERFMON_EVENTSEL_OS), + eventsel & ARCH_PERFMON_EVENTSEL_INT); +} + +static void reprogram_fixed_counter(struct kvm_pmc *pmc, u8 en_pmi, int idx) +{ + unsigned en = en_pmi & 0x3; + bool pmi = en_pmi & 0x8; + + stop_counter(pmc); + + if (!en || !pmc_enabled(pmc)) + return; + + reprogram_counter(pmc, PERF_TYPE_HARDWARE, + arch_events[fixed_pmc_events[idx]].event_type, + !(en & 0x2), /* exclude user */ + !(en & 0x1), /* exclude kernel */ + pmi); +} + +static inline u8 fixed_en_pmi(u64 ctrl, int idx) +{ + return (ctrl >> (idx * 4)) & 0xf; +} + +static void reprogram_fixed_counters(struct kvm_pmu *pmu, u64 data) +{ + int i; + + for (i = 0; i < pmu->nr_arch_fixed_counters; i++) { + u8 en_pmi = fixed_en_pmi(data, i); + struct kvm_pmc *pmc = get_fixed_pmc_idx(pmu, i); + + if (fixed_en_pmi(pmu->fixed_ctr_ctrl, i) == en_pmi) + continue; + + reprogram_fixed_counter(pmc, en_pmi, i); + } + + pmu->fixed_ctr_ctrl = data; +} + +static void reprogram_idx(struct kvm_pmu *pmu, int idx) +{ + struct kvm_pmc *pmc = global_idx_to_pmc(pmu, idx); + + if (!pmc) + return; + + if (pmc_is_gp(pmc)) + reprogram_gp_counter(pmc, pmc->eventsel); + else { + int fidx = idx - X86_PMC_IDX_FIXED; + reprogram_fixed_counter(pmc, + fixed_en_pmi(pmu->fixed_ctr_ctrl, fidx), fidx); + } +} + +static void global_ctrl_changed(struct kvm_pmu *pmu, u64 data) +{ + int bit; + u64 diff = pmu->global_ctrl ^ data; + + pmu->global_ctrl = data; + + for_each_set_bit(bit, (unsigned long *)&diff, X86_PMC_IDX_MAX) + reprogram_idx(pmu, bit); +} + +bool kvm_pmu_msr(struct kvm_vcpu *vcpu, u32 msr) +{ + struct kvm_pmu *pmu = &vcpu->arch.pmu; + int ret; + + switch (msr) { + case MSR_CORE_PERF_FIXED_CTR_CTRL: + case MSR_CORE_PERF_GLOBAL_STATUS: + case MSR_CORE_PERF_GLOBAL_CTRL: + case MSR_CORE_PERF_GLOBAL_OVF_CTRL: + ret = pmu->version > 1; + break; + default: + ret = get_gp_pmc(pmu, msr, MSR_IA32_PERFCTR0) + || get_gp_pmc(pmu, msr, MSR_P6_EVNTSEL0) + || get_fixed_pmc(pmu, msr); + break; + } + return ret; +} + +int kvm_pmu_get_msr(struct kvm_vcpu *vcpu, u32 index, u64 *data) +{ + struct kvm_pmu *pmu = &vcpu->arch.pmu; + struct kvm_pmc *pmc; + + switch (index) { + case MSR_CORE_PERF_FIXED_CTR_CTRL: + *data = pmu->fixed_ctr_ctrl; + return 0; + case MSR_CORE_PERF_GLOBAL_STATUS: + *data = pmu->global_status; + return 0; + case MSR_CORE_PERF_GLOBAL_CTRL: + *data = pmu->global_ctrl; + return 0; + case MSR_CORE_PERF_GLOBAL_OVF_CTRL: + *data = pmu->global_ovf_ctrl; + return 0; + default: + if ((pmc = get_gp_pmc(pmu, index, MSR_IA32_PERFCTR0)) || + (pmc = get_fixed_pmc(pmu, index))) { + *data = read_pmc(pmc); + return 0; + } else if ((pmc = get_gp_pmc(pmu, index, MSR_P6_EVNTSEL0))) { + *data = pmc->eventsel; + return 0; + } + } + return 1; +} + +int kvm_pmu_set_msr(struct kvm_vcpu *vcpu, u32 index, u64 data) +{ + struct kvm_pmu *pmu = &vcpu->arch.pmu; + struct kvm_pmc *pmc; + + switch (index) { + case MSR_CORE_PERF_FIXED_CTR_CTRL: + if (pmu->fixed_ctr_ctrl == data) + return 0; + if (!(data & 0xfffffffffffff444)) { + reprogram_fixed_counters(pmu, data); + return 0; + } + break; + case MSR_CORE_PERF_GLOBAL_STATUS: + break; /* RO MSR */ + case MSR_CORE_PERF_GLOBAL_CTRL: + if (pmu->global_ctrl == data) + return 0; + if (!(data & pmu->global_ctrl_mask)) { + global_ctrl_changed(pmu, data); + return 0; + } + break; + case MSR_CORE_PERF_GLOBAL_OVF_CTRL: + if (!(data & (pmu->global_ctrl_mask & ~(3ull<<62)))) { + pmu->global_status &= ~data; + pmu->global_ovf_ctrl = data; + return 0; + } + break; + default: + if ((pmc = get_gp_pmc(pmu, index, MSR_IA32_PERFCTR0)) || + (pmc = get_fixed_pmc(pmu, index))) { + data = (s64)(s32)data; + pmc->counter += data - read_pmc(pmc); + return 0; + } else if ((pmc = get_gp_pmc(pmu, index, MSR_P6_EVNTSEL0))) { + if (data == pmc->eventsel) + return 0; + if (!(data & 0xffffffff00200000ull)) { + reprogram_gp_counter(pmc, data); + return 0; + } + } + } + return 1; +} + +int kvm_pmu_read_pmc(struct kvm_vcpu *vcpu, unsigned pmc, u64 *data) +{ + struct kvm_pmu *pmu = &vcpu->arch.pmu; + bool fast_mode = pmc & (1u << 31); + bool fixed = pmc & (1u << 30); + struct kvm_pmc *counters; + u64 ctr; + + pmc &= (3u << 30) - 1; + if (!fixed && pmc >= pmu->nr_arch_gp_counters) + return 1; + if (fixed && pmc >= pmu->nr_arch_fixed_counters) + return 1; + counters = fixed ? pmu->fixed_counters : pmu->gp_counters; + ctr = read_pmc(&counters[pmc]); + if (fast_mode) + ctr = (u32)ctr; + *data = ctr; + + return 0; +} + +void kvm_pmu_cpuid_update(struct kvm_vcpu *vcpu) +{ + struct kvm_pmu *pmu = &vcpu->arch.pmu; + struct kvm_cpuid_entry2 *entry; + unsigned bitmap_len; + + pmu->nr_arch_gp_counters = 0; + pmu->nr_arch_fixed_counters = 0; + pmu->counter_bitmask[KVM_PMC_GP] = 0; + pmu->counter_bitmask[KVM_PMC_FIXED] = 0; + pmu->version = 0; + + entry = kvm_find_cpuid_entry(vcpu, 0xa, 0); + if (!entry) + return; + + pmu->version = entry->eax & 0xff; + if (!pmu->version) + return; + + pmu->nr_arch_gp_counters = min((int)(entry->eax >> 8) & 0xff, + X86_PMC_MAX_GENERIC); + pmu->counter_bitmask[KVM_PMC_GP] = + ((u64)1 << ((entry->eax >> 16) & 0xff)) - 1; + bitmap_len = (entry->eax >> 24) & 0xff; + pmu->available_event_types = ~entry->ebx & ((1ull << bitmap_len) - 1); + + if (pmu->version == 1) { + pmu->global_ctrl = (1 << pmu->nr_arch_gp_counters) - 1; + return; + } + + pmu->nr_arch_fixed_counters = min((int)(entry->edx & 0x1f), + X86_PMC_MAX_FIXED); + pmu->counter_bitmask[KVM_PMC_FIXED] = + ((u64)1 << ((entry->edx >> 5) & 0xff)) - 1; + pmu->global_ctrl_mask = ~(((1 << pmu->nr_arch_gp_counters) - 1) + | (((1ull << pmu->nr_arch_fixed_counters) - 1) + << X86_PMC_IDX_FIXED)); +} + +void kvm_pmu_init(struct kvm_vcpu *vcpu) +{ + int i; + struct kvm_pmu *pmu = &vcpu->arch.pmu; + + memset(pmu, 0, sizeof(*pmu)); + for (i = 0; i < X86_PMC_MAX_GENERIC; i++) { + pmu->gp_counters[i].type = KVM_PMC_GP; + pmu->gp_counters[i].vcpu = vcpu; + pmu->gp_counters[i].idx = i; + } + for (i = 0; i < X86_PMC_MAX_FIXED; i++) { + pmu->fixed_counters[i].type = KVM_PMC_FIXED; + pmu->fixed_counters[i].vcpu = vcpu; + pmu->fixed_counters[i].idx = i + X86_PMC_IDX_FIXED; + } + init_irq_work(&pmu->irq_work, trigger_pmi); + kvm_pmu_cpuid_update(vcpu); +} + +void kvm_pmu_reset(struct kvm_vcpu *vcpu) +{ + struct kvm_pmu *pmu = &vcpu->arch.pmu; + int i; + + irq_work_sync(&pmu->irq_work); + for (i = 0; i < X86_PMC_MAX_GENERIC; i++) { + struct kvm_pmc *pmc = &pmu->gp_counters[i]; + stop_counter(pmc); + pmc->counter = pmc->eventsel = 0; + } + + for (i = 0; i < X86_PMC_MAX_FIXED; i++) + stop_counter(&pmu->fixed_counters[i]); + + pmu->fixed_ctr_ctrl = pmu->global_ctrl = pmu->global_status = + pmu->global_ovf_ctrl = 0; +} + +void kvm_pmu_destroy(struct kvm_vcpu *vcpu) +{ + kvm_pmu_reset(vcpu); +} + +void kvm_handle_pmu_event(struct kvm_vcpu *vcpu) +{ + struct kvm_pmu *pmu = &vcpu->arch.pmu; + u64 bitmask; + int bit; + + bitmask = pmu->reprogram_pmi; + + for_each_set_bit(bit, (unsigned long *)&bitmask, X86_PMC_IDX_MAX) { + struct kvm_pmc *pmc = global_idx_to_pmc(pmu, bit); + + if (unlikely(!pmc || !pmc->perf_event)) { + clear_bit(bit, (unsigned long *)&pmu->reprogram_pmi); + continue; + } + + reprogram_idx(pmu, bit); + } +} diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index e32243eac2f4..5fa553babe56 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -1014,6 +1014,7 @@ static void init_vmcb(struct vcpu_svm *svm) set_intercept(svm, INTERCEPT_NMI); set_intercept(svm, INTERCEPT_SMI); set_intercept(svm, INTERCEPT_SELECTIVE_CR0); + set_intercept(svm, INTERCEPT_RDPMC); set_intercept(svm, INTERCEPT_CPUID); set_intercept(svm, INTERCEPT_INVD); set_intercept(svm, INTERCEPT_HLT); @@ -2770,6 +2771,19 @@ static int emulate_on_interception(struct vcpu_svm *svm) return emulate_instruction(&svm->vcpu, 0) == EMULATE_DONE; } +static int rdpmc_interception(struct vcpu_svm *svm) +{ + int err; + + if (!static_cpu_has(X86_FEATURE_NRIPS)) + return emulate_on_interception(svm); + + err = kvm_rdpmc(&svm->vcpu); + kvm_complete_insn_gp(&svm->vcpu, err); + + return 1; +} + bool check_selective_cr0_intercepted(struct vcpu_svm *svm, unsigned long val) { unsigned long cr0 = svm->vcpu.arch.cr0; @@ -3190,6 +3204,7 @@ static int (*svm_exit_handlers[])(struct vcpu_svm *svm) = { [SVM_EXIT_SMI] = nop_on_interception, [SVM_EXIT_INIT] = nop_on_interception, [SVM_EXIT_VINTR] = interrupt_window_interception, + [SVM_EXIT_RDPMC] = rdpmc_interception, [SVM_EXIT_CPUID] = cpuid_interception, [SVM_EXIT_IRET] = iret_interception, [SVM_EXIT_INVD] = emulate_on_interception, diff --git a/arch/x86/kvm/timer.c b/arch/x86/kvm/timer.c index ae432ea1cd83..6b85cc647f34 100644 --- a/arch/x86/kvm/timer.c +++ b/arch/x86/kvm/timer.c @@ -18,9 +18,10 @@ #include <linux/atomic.h> #include "kvm_timer.h" -static int __kvm_timer_fn(struct kvm_vcpu *vcpu, struct kvm_timer *ktimer) +enum hrtimer_restart kvm_timer_fn(struct hrtimer *data) { - int restart_timer = 0; + struct kvm_timer *ktimer = container_of(data, struct kvm_timer, timer); + struct kvm_vcpu *vcpu = ktimer->vcpu; wait_queue_head_t *q = &vcpu->wq; /* @@ -40,26 +41,7 @@ static int __kvm_timer_fn(struct kvm_vcpu *vcpu, struct kvm_timer *ktimer) if (ktimer->t_ops->is_periodic(ktimer)) { hrtimer_add_expires_ns(&ktimer->timer, ktimer->period); - restart_timer = 1; - } - - return restart_timer; -} - -enum hrtimer_restart kvm_timer_fn(struct hrtimer *data) -{ - int restart_timer; - struct kvm_vcpu *vcpu; - struct kvm_timer *ktimer = container_of(data, struct kvm_timer, timer); - - vcpu = ktimer->vcpu; - if (!vcpu) - return HRTIMER_NORESTART; - - restart_timer = __kvm_timer_fn(vcpu, ktimer); - if (restart_timer) return HRTIMER_RESTART; - else + } else return HRTIMER_NORESTART; } - diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 579a0b51696a..906a7e84200f 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -18,6 +18,7 @@ #include "irq.h" #include "mmu.h" +#include "cpuid.h" #include <linux/kvm_host.h> #include <linux/module.h> @@ -1747,7 +1748,6 @@ static void setup_msrs(struct vcpu_vmx *vmx) int save_nmsrs, index; unsigned long *msr_bitmap; - vmx_load_host_state(vmx); save_nmsrs = 0; #ifdef CONFIG_X86_64 if (is_long_mode(&vmx->vcpu)) { @@ -1956,6 +1956,7 @@ static __init void nested_vmx_setup_ctls_msrs(void) #endif CPU_BASED_MOV_DR_EXITING | CPU_BASED_UNCOND_IO_EXITING | CPU_BASED_USE_IO_BITMAPS | CPU_BASED_MONITOR_EXITING | + CPU_BASED_RDPMC_EXITING | CPU_BASED_ACTIVATE_SECONDARY_CONTROLS; /* * We can allow some features even when not supported by the @@ -2142,12 +2143,10 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata) return 1; /* Otherwise falls through */ default: - vmx_load_host_state(to_vmx(vcpu)); if (vmx_get_vmx_msr(vcpu, msr_index, pdata)) return 0; msr = find_msr_entry(to_vmx(vcpu), msr_index); if (msr) { - vmx_load_host_state(to_vmx(vcpu)); data = msr->data; break; } @@ -2171,7 +2170,6 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data) switch (msr_index) { case MSR_EFER: - vmx_load_host_state(vmx); ret = kvm_set_msr_common(vcpu, msr_index, data); break; #ifdef CONFIG_X86_64 @@ -2220,7 +2218,6 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data) break; msr = find_msr_entry(vmx, msr_index); if (msr) { - vmx_load_host_state(vmx); msr->data = data; break; } @@ -2414,7 +2411,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf) CPU_BASED_USE_TSC_OFFSETING | CPU_BASED_MWAIT_EXITING | CPU_BASED_MONITOR_EXITING | - CPU_BASED_INVLPG_EXITING; + CPU_BASED_INVLPG_EXITING | + CPU_BASED_RDPMC_EXITING; if (yield_on_hlt) min |= CPU_BASED_HLT_EXITING; @@ -2716,11 +2714,13 @@ static gva_t rmode_tss_base(struct kvm *kvm) { if (!kvm->arch.tss_addr) { struct kvm_memslots *slots; + struct kvm_memory_slot *slot; gfn_t base_gfn; slots = kvm_memslots(kvm); - base_gfn = slots->memslots[0].base_gfn + - kvm->memslots->memslots[0].npages - 3; + slot = id_to_memslot(slots, 0); + base_gfn = slot->base_gfn + slot->npages - 3; + return base_gfn << PAGE_SHIFT; } return kvm->arch.tss_addr; @@ -3945,12 +3945,15 @@ static bool nested_exit_on_intr(struct kvm_vcpu *vcpu) static void enable_irq_window(struct kvm_vcpu *vcpu) { u32 cpu_based_vm_exec_control; - if (is_guest_mode(vcpu) && nested_exit_on_intr(vcpu)) - /* We can get here when nested_run_pending caused - * vmx_interrupt_allowed() to return false. In this case, do - * nothing - the interrupt will be injected later. + if (is_guest_mode(vcpu) && nested_exit_on_intr(vcpu)) { + /* + * We get here if vmx_interrupt_allowed() said we can't + * inject to L1 now because L2 must run. Ask L2 to exit + * right after entry, so we can inject to L1 more promptly. */ + kvm_make_request(KVM_REQ_IMMEDIATE_EXIT, vcpu); return; + } cpu_based_vm_exec_control = vmcs_read32(CPU_BASED_VM_EXEC_CONTROL); cpu_based_vm_exec_control |= CPU_BASED_VIRTUAL_INTR_PENDING; @@ -4077,11 +4080,12 @@ static void vmx_set_nmi_mask(struct kvm_vcpu *vcpu, bool masked) static int vmx_interrupt_allowed(struct kvm_vcpu *vcpu) { if (is_guest_mode(vcpu) && nested_exit_on_intr(vcpu)) { - struct vmcs12 *vmcs12; - if (to_vmx(vcpu)->nested.nested_run_pending) + struct vmcs12 *vmcs12 = get_vmcs12(vcpu); + if (to_vmx(vcpu)->nested.nested_run_pending || + (vmcs12->idt_vectoring_info_field & + VECTORING_INFO_VALID_MASK)) return 0; nested_vmx_vmexit(vcpu); - vmcs12 = get_vmcs12(vcpu); vmcs12->vm_exit_reason = EXIT_REASON_EXTERNAL_INTERRUPT; vmcs12->vm_exit_intr_info = 0; /* fall through to normal code, but now in L1, not L2 */ @@ -4611,6 +4615,16 @@ static int handle_invlpg(struct kvm_vcpu *vcpu) return 1; } +static int handle_rdpmc(struct kvm_vcpu *vcpu) +{ + int err; + + err = kvm_rdpmc(vcpu); + kvm_complete_insn_gp(vcpu, err); + + return 1; +} + static int handle_wbinvd(struct kvm_vcpu *vcpu) { skip_emulated_instruction(vcpu); @@ -5561,6 +5575,7 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = { [EXIT_REASON_HLT] = handle_halt, [EXIT_REASON_INVD] = handle_invd, [EXIT_REASON_INVLPG] = handle_invlpg, + [EXIT_REASON_RDPMC] = handle_rdpmc, [EXIT_REASON_VMCALL] = handle_vmcall, [EXIT_REASON_VMCLEAR] = handle_vmclear, [EXIT_REASON_VMLAUNCH] = handle_vmlaunch, diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index c38efd7b792e..1171def5f96b 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -26,6 +26,7 @@ #include "tss.h" #include "kvm_cache_regs.h" #include "x86.h" +#include "cpuid.h" #include <linux/clocksource.h> #include <linux/interrupt.h> @@ -82,8 +83,6 @@ static u64 __read_mostly efer_reserved_bits = ~((u64)EFER_SCE); #define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU static void update_cr8_intercept(struct kvm_vcpu *vcpu); -static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid, - struct kvm_cpuid_entry2 __user *entries); static void process_nmi(struct kvm_vcpu *vcpu); struct kvm_x86_ops *kvm_x86_ops; @@ -574,58 +573,6 @@ int kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr) } EXPORT_SYMBOL_GPL(kvm_set_xcr); -static bool guest_cpuid_has_xsave(struct kvm_vcpu *vcpu) -{ - struct kvm_cpuid_entry2 *best; - - best = kvm_find_cpuid_entry(vcpu, 1, 0); - return best && (best->ecx & bit(X86_FEATURE_XSAVE)); -} - -static bool guest_cpuid_has_smep(struct kvm_vcpu *vcpu) -{ - struct kvm_cpuid_entry2 *best; - - best = kvm_find_cpuid_entry(vcpu, 7, 0); - return best && (best->ebx & bit(X86_FEATURE_SMEP)); -} - -static bool guest_cpuid_has_fsgsbase(struct kvm_vcpu *vcpu) -{ - struct kvm_cpuid_entry2 *best; - - best = kvm_find_cpuid_entry(vcpu, 7, 0); - return best && (best->ebx & bit(X86_FEATURE_FSGSBASE)); -} - -static void update_cpuid(struct kvm_vcpu *vcpu) -{ - struct kvm_cpuid_entry2 *best; - struct kvm_lapic *apic = vcpu->arch.apic; - u32 timer_mode_mask; - - best = kvm_find_cpuid_entry(vcpu, 1, 0); - if (!best) - return; - - /* Update OSXSAVE bit */ - if (cpu_has_xsave && best->function == 0x1) { - best->ecx &= ~(bit(X86_FEATURE_OSXSAVE)); - if (kvm_read_cr4_bits(vcpu, X86_CR4_OSXSAVE)) - best->ecx |= bit(X86_FEATURE_OSXSAVE); - } - - if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && - best->function == 0x1) { - best->ecx |= bit(X86_FEATURE_TSC_DEADLINE_TIMER); - timer_mode_mask = 3 << 17; - } else - timer_mode_mask = 1 << 17; - - if (apic) - apic->lapic_timer.timer_mode_mask = timer_mode_mask; -} - int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) { unsigned long old_cr4 = kvm_read_cr4(vcpu); @@ -659,7 +606,7 @@ int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) kvm_mmu_reset_context(vcpu); if ((cr4 ^ old_cr4) & X86_CR4_OSXSAVE) - update_cpuid(vcpu); + kvm_update_cpuid(vcpu); return 0; } @@ -813,6 +760,21 @@ int kvm_get_dr(struct kvm_vcpu *vcpu, int dr, unsigned long *val) } EXPORT_SYMBOL_GPL(kvm_get_dr); +bool kvm_rdpmc(struct kvm_vcpu *vcpu) +{ + u32 ecx = kvm_register_read(vcpu, VCPU_REGS_RCX); + u64 data; + int err; + + err = kvm_pmu_read_pmc(vcpu, ecx, &data); + if (err) + return err; + kvm_register_write(vcpu, VCPU_REGS_RAX, (u32)data); + kvm_register_write(vcpu, VCPU_REGS_RDX, data >> 32); + return err; +} +EXPORT_SYMBOL_GPL(kvm_rdpmc); + /* * List of msr numbers which we expose to userspace through KVM_GET_MSRS * and KVM_SET_MSRS, and KVM_GET_MSR_INDEX_LIST. @@ -1362,12 +1324,11 @@ static int xen_hvm_config(struct kvm_vcpu *vcpu, u64 data) if (page_num >= blob_size) goto out; r = -ENOMEM; - page = kzalloc(PAGE_SIZE, GFP_KERNEL); - if (!page) + page = memdup_user(blob_addr + (page_num * PAGE_SIZE), PAGE_SIZE); + if (IS_ERR(page)) { + r = PTR_ERR(page); goto out; - r = -EFAULT; - if (copy_from_user(page, blob_addr + (page_num * PAGE_SIZE), PAGE_SIZE)) - goto out_free; + } if (kvm_write_guest(kvm, page_addr, page, PAGE_SIZE)) goto out_free; r = 0; @@ -1656,8 +1617,6 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data) * which we perfectly emulate ;-). Any other value should be at least * reported, some guests depend on them. */ - case MSR_P6_EVNTSEL0: - case MSR_P6_EVNTSEL1: case MSR_K7_EVNTSEL0: case MSR_K7_EVNTSEL1: case MSR_K7_EVNTSEL2: @@ -1669,8 +1628,6 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data) /* at least RHEL 4 unconditionally writes to the perfctr registers, * so we ignore writes to make it happy. */ - case MSR_P6_PERFCTR0: - case MSR_P6_PERFCTR1: case MSR_K7_PERFCTR0: case MSR_K7_PERFCTR1: case MSR_K7_PERFCTR2: @@ -1707,6 +1664,8 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data) default: if (msr && (msr == vcpu->kvm->arch.xen_hvm_config.msr)) return xen_hvm_config(vcpu, data); + if (kvm_pmu_msr(vcpu, msr)) + return kvm_pmu_set_msr(vcpu, msr, data); if (!ignore_msrs) { pr_unimpl(vcpu, "unhandled wrmsr: 0x%x data %llx\n", msr, data); @@ -1869,10 +1828,6 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) case MSR_K8_SYSCFG: case MSR_K7_HWCR: case MSR_VM_HSAVE_PA: - case MSR_P6_PERFCTR0: - case MSR_P6_PERFCTR1: - case MSR_P6_EVNTSEL0: - case MSR_P6_EVNTSEL1: case MSR_K7_EVNTSEL0: case MSR_K7_PERFCTR0: case MSR_K8_INT_PENDING_MSG: @@ -1983,6 +1938,8 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) data = 0xbe702111; break; default: + if (kvm_pmu_msr(vcpu, msr)) + return kvm_pmu_get_msr(vcpu, msr, pdata); if (!ignore_msrs) { pr_unimpl(vcpu, "unhandled rdmsr: 0x%x\n", msr); return 1; @@ -2041,15 +1998,12 @@ static int msr_io(struct kvm_vcpu *vcpu, struct kvm_msrs __user *user_msrs, if (msrs.nmsrs >= MAX_IO_MSRS) goto out; - r = -ENOMEM; size = sizeof(struct kvm_msr_entry) * msrs.nmsrs; - entries = kmalloc(size, GFP_KERNEL); - if (!entries) + entries = memdup_user(user_msrs->entries, size); + if (IS_ERR(entries)) { + r = PTR_ERR(entries); goto out; - - r = -EFAULT; - if (copy_from_user(entries, user_msrs->entries, size)) - goto out_free; + } r = n = __msr_io(vcpu, &msrs, entries, do_msr); if (r < 0) @@ -2135,6 +2089,9 @@ int kvm_dev_ioctl_check_extension(long ext) case KVM_CAP_TSC_CONTROL: r = kvm_has_tsc_control; break; + case KVM_CAP_TSC_DEADLINE_TIMER: + r = boot_cpu_has(X86_FEATURE_TSC_DEADLINE_TIMER); + break; default: r = 0; break; @@ -2266,466 +2223,6 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) vcpu->arch.last_guest_tsc = kvm_x86_ops->read_l1_tsc(vcpu); } -static int is_efer_nx(void) -{ - unsigned long long efer = 0; - - rdmsrl_safe(MSR_EFER, &efer); - return efer & EFER_NX; -} - -static void cpuid_fix_nx_cap(struct kvm_vcpu *vcpu) -{ - int i; - struct kvm_cpuid_entry2 *e, *entry; - - entry = NULL; - for (i = 0; i < vcpu->arch.cpuid_nent; ++i) { - e = &vcpu->arch.cpuid_entries[i]; - if (e->function == 0x80000001) { - entry = e; - break; - } - } - if (entry && (entry->edx & (1 << 20)) && !is_efer_nx()) { - entry->edx &= ~(1 << 20); - printk(KERN_INFO "kvm: guest NX capability removed\n"); - } -} - -/* when an old userspace process fills a new kernel module */ -static int kvm_vcpu_ioctl_set_cpuid(struct kvm_vcpu *vcpu, - struct kvm_cpuid *cpuid, - struct kvm_cpuid_entry __user *entries) -{ - int r, i; - struct kvm_cpuid_entry *cpuid_entries; - - r = -E2BIG; - if (cpuid->nent > KVM_MAX_CPUID_ENTRIES) - goto out; - r = -ENOMEM; - cpuid_entries = vmalloc(sizeof(struct kvm_cpuid_entry) * cpuid->nent); - if (!cpuid_entries) - goto out; - r = -EFAULT; - if (copy_from_user(cpuid_entries, entries, - cpuid->nent * sizeof(struct kvm_cpuid_entry))) - goto out_free; - for (i = 0; i < cpuid->nent; i++) { - vcpu->arch.cpuid_entries[i].function = cpuid_entries[i].function; - vcpu->arch.cpuid_entries[i].eax = cpuid_entries[i].eax; - vcpu->arch.cpuid_entries[i].ebx = cpuid_entries[i].ebx; - vcpu->arch.cpuid_entries[i].ecx = cpuid_entries[i].ecx; - vcpu->arch.cpuid_entries[i].edx = cpuid_entries[i].edx; - vcpu->arch.cpuid_entries[i].index = 0; - vcpu->arch.cpuid_entries[i].flags = 0; - vcpu->arch.cpuid_entries[i].padding[0] = 0; - vcpu->arch.cpuid_entries[i].padding[1] = 0; - vcpu->arch.cpuid_entries[i].padding[2] = 0; - } - vcpu->arch.cpuid_nent = cpuid->nent; - cpuid_fix_nx_cap(vcpu); - r = 0; - kvm_apic_set_version(vcpu); - kvm_x86_ops->cpuid_update(vcpu); - update_cpuid(vcpu); - -out_free: - vfree(cpuid_entries); -out: - return r; -} - -static int kvm_vcpu_ioctl_set_cpuid2(struct kvm_vcpu *vcpu, - struct kvm_cpuid2 *cpuid, - struct kvm_cpuid_entry2 __user *entries) -{ - int r; - - r = -E2BIG; - if (cpuid->nent > KVM_MAX_CPUID_ENTRIES) - goto out; - r = -EFAULT; - if (copy_from_user(&vcpu->arch.cpuid_entries, entries, - cpuid->nent * sizeof(struct kvm_cpuid_entry2))) - goto out; - vcpu->arch.cpuid_nent = cpuid->nent; - kvm_apic_set_version(vcpu); - kvm_x86_ops->cpuid_update(vcpu); - update_cpuid(vcpu); - return 0; - -out: - return r; -} - -static int kvm_vcpu_ioctl_get_cpuid2(struct kvm_vcpu *vcpu, - struct kvm_cpuid2 *cpuid, - struct kvm_cpuid_entry2 __user *entries) -{ - int r; - - r = -E2BIG; - if (cpuid->nent < vcpu->arch.cpuid_nent) - goto out; - r = -EFAULT; - if (copy_to_user(entries, &vcpu->arch.cpuid_entries, - vcpu->arch.cpuid_nent * sizeof(struct kvm_cpuid_entry2))) - goto out; - return 0; - -out: - cpuid->nent = vcpu->arch.cpuid_nent; - return r; -} - -static void cpuid_mask(u32 *word, int wordnum) -{ - *word &= boot_cpu_data.x86_capability[wordnum]; -} - -static void do_cpuid_1_ent(struct kvm_cpuid_entry2 *entry, u32 function, - u32 index) -{ - entry->function = function; - entry->index = index; - cpuid_count(entry->function, entry->index, - &entry->eax, &entry->ebx, &entry->ecx, &entry->edx); - entry->flags = 0; -} - -static bool supported_xcr0_bit(unsigned bit) -{ - u64 mask = ((u64)1 << bit); - - return mask & (XSTATE_FP | XSTATE_SSE | XSTATE_YMM) & host_xcr0; -} - -#define F(x) bit(X86_FEATURE_##x) - -static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function, - u32 index, int *nent, int maxnent) -{ - unsigned f_nx = is_efer_nx() ? F(NX) : 0; -#ifdef CONFIG_X86_64 - unsigned f_gbpages = (kvm_x86_ops->get_lpage_level() == PT_PDPE_LEVEL) - ? F(GBPAGES) : 0; - unsigned f_lm = F(LM); -#else - unsigned f_gbpages = 0; - unsigned f_lm = 0; -#endif - unsigned f_rdtscp = kvm_x86_ops->rdtscp_supported() ? F(RDTSCP) : 0; - - /* cpuid 1.edx */ - const u32 kvm_supported_word0_x86_features = - F(FPU) | F(VME) | F(DE) | F(PSE) | - F(TSC) | F(MSR) | F(PAE) | F(MCE) | - F(CX8) | F(APIC) | 0 /* Reserved */ | F(SEP) | - F(MTRR) | F(PGE) | F(MCA) | F(CMOV) | - F(PAT) | F(PSE36) | 0 /* PSN */ | F(CLFLSH) | - 0 /* Reserved, DS, ACPI */ | F(MMX) | - F(FXSR) | F(XMM) | F(XMM2) | F(SELFSNOOP) | - 0 /* HTT, TM, Reserved, PBE */; - /* cpuid 0x80000001.edx */ - const u32 kvm_supported_word1_x86_features = - F(FPU) | F(VME) | F(DE) | F(PSE) | - F(TSC) | F(MSR) | F(PAE) | F(MCE) | - F(CX8) | F(APIC) | 0 /* Reserved */ | F(SYSCALL) | - F(MTRR) | F(PGE) | F(MCA) | F(CMOV) | - F(PAT) | F(PSE36) | 0 /* Reserved */ | - f_nx | 0 /* Reserved */ | F(MMXEXT) | F(MMX) | - F(FXSR) | F(FXSR_OPT) | f_gbpages | f_rdtscp | - 0 /* Reserved */ | f_lm | F(3DNOWEXT) | F(3DNOW); - /* cpuid 1.ecx */ - const u32 kvm_supported_word4_x86_features = - F(XMM3) | F(PCLMULQDQ) | 0 /* DTES64, MONITOR */ | - 0 /* DS-CPL, VMX, SMX, EST */ | - 0 /* TM2 */ | F(SSSE3) | 0 /* CNXT-ID */ | 0 /* Reserved */ | - 0 /* Reserved */ | F(CX16) | 0 /* xTPR Update, PDCM */ | - 0 /* Reserved, DCA */ | F(XMM4_1) | - F(XMM4_2) | F(X2APIC) | F(MOVBE) | F(POPCNT) | - 0 /* Reserved*/ | F(AES) | F(XSAVE) | 0 /* OSXSAVE */ | F(AVX) | - F(F16C) | F(RDRAND); - /* cpuid 0x80000001.ecx */ - const u32 kvm_supported_word6_x86_features = - F(LAHF_LM) | F(CMP_LEGACY) | 0 /*SVM*/ | 0 /* ExtApicSpace */ | - F(CR8_LEGACY) | F(ABM) | F(SSE4A) | F(MISALIGNSSE) | - F(3DNOWPREFETCH) | 0 /* OSVW */ | 0 /* IBS */ | F(XOP) | - 0 /* SKINIT, WDT, LWP */ | F(FMA4) | F(TBM); - - /* cpuid 0xC0000001.edx */ - const u32 kvm_supported_word5_x86_features = - F(XSTORE) | F(XSTORE_EN) | F(XCRYPT) | F(XCRYPT_EN) | - F(ACE2) | F(ACE2_EN) | F(PHE) | F(PHE_EN) | - F(PMM) | F(PMM_EN); - - /* cpuid 7.0.ebx */ - const u32 kvm_supported_word9_x86_features = - F(SMEP) | F(FSGSBASE) | F(ERMS); - - /* all calls to cpuid_count() should be made on the same cpu */ - get_cpu(); - do_cpuid_1_ent(entry, function, index); - ++*nent; - - switch (function) { - case 0: - entry->eax = min(entry->eax, (u32)0xd); - break; - case 1: - entry->edx &= kvm_supported_word0_x86_features; - cpuid_mask(&entry->edx, 0); - entry->ecx &= kvm_supported_word4_x86_features; - cpuid_mask(&entry->ecx, 4); - /* we support x2apic emulation even if host does not support - * it since we emulate x2apic in software */ - entry->ecx |= F(X2APIC); - break; - /* function 2 entries are STATEFUL. That is, repeated cpuid commands - * may return different values. This forces us to get_cpu() before - * issuing the first command, and also to emulate this annoying behavior - * in kvm_emulate_cpuid() using KVM_CPUID_FLAG_STATE_READ_NEXT */ - case 2: { - int t, times = entry->eax & 0xff; - - entry->flags |= KVM_CPUID_FLAG_STATEFUL_FUNC; - entry->flags |= KVM_CPUID_FLAG_STATE_READ_NEXT; - for (t = 1; t < times && *nent < maxnent; ++t) { - do_cpuid_1_ent(&entry[t], function, 0); - entry[t].flags |= KVM_CPUID_FLAG_STATEFUL_FUNC; - ++*nent; - } - break; - } - /* function 4 has additional index. */ - case 4: { - int i, cache_type; - - entry->flags |= KVM_CPUID_FLAG_SIGNIFCANT_INDEX; - /* read more entries until cache_type is zero */ - for (i = 1; *nent < maxnent; ++i) { - cache_type = entry[i - 1].eax & 0x1f; - if (!cache_type) - break; - do_cpuid_1_ent(&entry[i], function, i); - entry[i].flags |= - KVM_CPUID_FLAG_SIGNIFCANT_INDEX; - ++*nent; - } - break; - } - case 7: { - entry->flags |= KVM_CPUID_FLAG_SIGNIFCANT_INDEX; - /* Mask ebx against host capbability word 9 */ - if (index == 0) { - entry->ebx &= kvm_supported_word9_x86_features; - cpuid_mask(&entry->ebx, 9); - } else - entry->ebx = 0; - entry->eax = 0; - entry->ecx = 0; - entry->edx = 0; - break; - } - case 9: - break; - /* function 0xb has additional index. */ - case 0xb: { - int i, level_type; - - entry->flags |= KVM_CPUID_FLAG_SIGNIFCANT_INDEX; - /* read more entries until level_type is zero */ - for (i = 1; *nent < maxnent; ++i) { - level_type = entry[i - 1].ecx & 0xff00; - if (!level_type) - break; - do_cpuid_1_ent(&entry[i], function, i); - entry[i].flags |= - KVM_CPUID_FLAG_SIGNIFCANT_INDEX; - ++*nent; - } - break; - } - case 0xd: { - int idx, i; - - entry->flags |= KVM_CPUID_FLAG_SIGNIFCANT_INDEX; - for (idx = 1, i = 1; *nent < maxnent && idx < 64; ++idx) { - do_cpuid_1_ent(&entry[i], function, idx); - if (entry[i].eax == 0 || !supported_xcr0_bit(idx)) - continue; - entry[i].flags |= - KVM_CPUID_FLAG_SIGNIFCANT_INDEX; - ++*nent; - ++i; - } - break; - } - case KVM_CPUID_SIGNATURE: { - char signature[12] = "KVMKVMKVM\0\0"; - u32 *sigptr = (u32 *)signature; - entry->eax = 0; - entry->ebx = sigptr[0]; - entry->ecx = sigptr[1]; - entry->edx = sigptr[2]; - break; - } - case KVM_CPUID_FEATURES: - entry->eax = (1 << KVM_FEATURE_CLOCKSOURCE) | - (1 << KVM_FEATURE_NOP_IO_DELAY) | - (1 << KVM_FEATURE_CLOCKSOURCE2) | - (1 << KVM_FEATURE_ASYNC_PF) | - (1 << KVM_FEATURE_CLOCKSOURCE_STABLE_BIT); - - if (sched_info_on()) - entry->eax |= (1 << KVM_FEATURE_STEAL_TIME); - - entry->ebx = 0; - entry->ecx = 0; - entry->edx = 0; - break; - case 0x80000000: - entry->eax = min(entry->eax, 0x8000001a); - break; - case 0x80000001: - entry->edx &= kvm_supported_word1_x86_features; - cpuid_mask(&entry->edx, 1); - entry->ecx &= kvm_supported_word6_x86_features; - cpuid_mask(&entry->ecx, 6); - break; - case 0x80000008: { - unsigned g_phys_as = (entry->eax >> 16) & 0xff; - unsigned virt_as = max((entry->eax >> 8) & 0xff, 48U); - unsigned phys_as = entry->eax & 0xff; - - if (!g_phys_as) - g_phys_as = phys_as; - entry->eax = g_phys_as | (virt_as << 8); - entry->ebx = entry->edx = 0; - break; - } - case 0x80000019: - entry->ecx = entry->edx = 0; - break; - case 0x8000001a: - break; - case 0x8000001d: - break; - /*Add support for Centaur's CPUID instruction*/ - case 0xC0000000: - /*Just support up to 0xC0000004 now*/ - entry->eax = min(entry->eax, 0xC0000004); - break; - case 0xC0000001: - entry->edx &= kvm_supported_word5_x86_features; - cpuid_mask(&entry->edx, 5); - break; - case 3: /* Processor serial number */ - case 5: /* MONITOR/MWAIT */ - case 6: /* Thermal management */ - case 0xA: /* Architectural Performance Monitoring */ - case 0x80000007: /* Advanced power management */ - case 0xC0000002: - case 0xC0000003: - case 0xC0000004: - default: - entry->eax = entry->ebx = entry->ecx = entry->edx = 0; - break; - } - - kvm_x86_ops->set_supported_cpuid(function, entry); - - put_cpu(); -} - -#undef F - -static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid, - struct kvm_cpuid_entry2 __user *entries) -{ - struct kvm_cpuid_entry2 *cpuid_entries; - int limit, nent = 0, r = -E2BIG; - u32 func; - - if (cpuid->nent < 1) - goto out; - if (cpuid->nent > KVM_MAX_CPUID_ENTRIES) - cpuid->nent = KVM_MAX_CPUID_ENTRIES; - r = -ENOMEM; - cpuid_entries = vmalloc(sizeof(struct kvm_cpuid_entry2) * cpuid->nent); - if (!cpuid_entries) - goto out; - - do_cpuid_ent(&cpuid_entries[0], 0, 0, &nent, cpuid->nent); - limit = cpuid_entries[0].eax; - for (func = 1; func <= limit && nent < cpuid->nent; ++func) - do_cpuid_ent(&cpuid_entries[nent], func, 0, - &nent, cpuid->nent); - r = -E2BIG; - if (nent >= cpuid->nent) - goto out_free; - - do_cpuid_ent(&cpuid_entries[nent], 0x80000000, 0, &nent, cpuid->nent); - limit = cpuid_entries[nent - 1].eax; - for (func = 0x80000001; func <= limit && nent < cpuid->nent; ++func) - do_cpuid_ent(&cpuid_entries[nent], func, 0, - &nent, cpuid->nent); - - - - r = -E2BIG; - if (nent >= cpuid->nent) - goto out_free; - - /* Add support for Centaur's CPUID instruction. */ - if (boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR) { - do_cpuid_ent(&cpuid_entries[nent], 0xC0000000, 0, - &nent, cpuid->nent); - - r = -E2BIG; - if (nent >= cpuid->nent) - goto out_free; - - limit = cpuid_entries[nent - 1].eax; - for (func = 0xC0000001; - func <= limit && nent < cpuid->nent; ++func) - do_cpuid_ent(&cpuid_entries[nent], func, 0, - &nent, cpuid->nent); - - r = -E2BIG; - if (nent >= cpuid->nent) - goto out_free; - } - - do_cpuid_ent(&cpuid_entries[nent], KVM_CPUID_SIGNATURE, 0, &nent, - cpuid->nent); - - r = -E2BIG; - if (nent >= cpuid->nent) - goto out_free; - - do_cpuid_ent(&cpuid_entries[nent], KVM_CPUID_FEATURES, 0, &nent, - cpuid->nent); - - r = -E2BIG; - if (nent >= cpuid->nent) - goto out_free; - - r = -EFAULT; - if (copy_to_user(entries, cpuid_entries, - nent * sizeof(struct kvm_cpuid_entry2))) - goto out_free; - cpuid->nent = nent; - r = 0; - -out_free: - vfree(cpuid_entries); -out: - return r; -} - static int kvm_vcpu_ioctl_get_lapic(struct kvm_vcpu *vcpu, struct kvm_lapic_state *s) { @@ -3043,13 +2540,12 @@ long kvm_arch_vcpu_ioctl(struct file *filp, r = -EINVAL; if (!vcpu->arch.apic) goto out; - u.lapic = kmalloc(sizeof(struct kvm_lapic_state), GFP_KERNEL); - r = -ENOMEM; - if (!u.lapic) - goto out; - r = -EFAULT; - if (copy_from_user(u.lapic, argp, sizeof(struct kvm_lapic_state))) + u.lapic = memdup_user(argp, sizeof(*u.lapic)); + if (IS_ERR(u.lapic)) { + r = PTR_ERR(u.lapic); goto out; + } + r = kvm_vcpu_ioctl_set_lapic(vcpu, u.lapic); if (r) goto out; @@ -3228,14 +2724,11 @@ long kvm_arch_vcpu_ioctl(struct file *filp, break; } case KVM_SET_XSAVE: { - u.xsave = kzalloc(sizeof(struct kvm_xsave), GFP_KERNEL); - r = -ENOMEM; - if (!u.xsave) - break; - - r = -EFAULT; - if (copy_from_user(u.xsave, argp, sizeof(struct kvm_xsave))) - break; + u.xsave = memdup_user(argp, sizeof(*u.xsave)); + if (IS_ERR(u.xsave)) { + r = PTR_ERR(u.xsave); + goto out; + } r = kvm_vcpu_ioctl_x86_set_xsave(vcpu, u.xsave); break; @@ -3256,15 +2749,11 @@ long kvm_arch_vcpu_ioctl(struct file *filp, break; } case KVM_SET_XCRS: { - u.xcrs = kzalloc(sizeof(struct kvm_xcrs), GFP_KERNEL); - r = -ENOMEM; - if (!u.xcrs) - break; - - r = -EFAULT; - if (copy_from_user(u.xcrs, argp, - sizeof(struct kvm_xcrs))) - break; + u.xcrs = memdup_user(argp, sizeof(*u.xcrs)); + if (IS_ERR(u.xcrs)) { + r = PTR_ERR(u.xcrs); + goto out; + } r = kvm_vcpu_ioctl_x86_set_xcrs(vcpu, u.xcrs); break; @@ -3461,16 +2950,59 @@ static int kvm_vm_ioctl_reinject(struct kvm *kvm, return 0; } +/** + * write_protect_slot - write protect a slot for dirty logging + * @kvm: the kvm instance + * @memslot: the slot we protect + * @dirty_bitmap: the bitmap indicating which pages are dirty + * @nr_dirty_pages: the number of dirty pages + * + * We have two ways to find all sptes to protect: + * 1. Use kvm_mmu_slot_remove_write_access() which walks all shadow pages and + * checks ones that have a spte mapping a page in the slot. + * 2. Use kvm_mmu_rmap_write_protect() for each gfn found in the bitmap. + * + * Generally speaking, if there are not so many dirty pages compared to the + * number of shadow pages, we should use the latter. + * + * Note that letting others write into a page marked dirty in the old bitmap + * by using the remaining tlb entry is not a problem. That page will become + * write protected again when we flush the tlb and then be reported dirty to + * the user space by copying the old bitmap. + */ +static void write_protect_slot(struct kvm *kvm, + struct kvm_memory_slot *memslot, + unsigned long *dirty_bitmap, + unsigned long nr_dirty_pages) +{ + /* Not many dirty pages compared to # of shadow pages. */ + if (nr_dirty_pages < kvm->arch.n_used_mmu_pages) { + unsigned long gfn_offset; + + for_each_set_bit(gfn_offset, dirty_bitmap, memslot->npages) { + unsigned long gfn = memslot->base_gfn + gfn_offset; + + spin_lock(&kvm->mmu_lock); + kvm_mmu_rmap_write_protect(kvm, gfn, memslot); + spin_unlock(&kvm->mmu_lock); + } + kvm_flush_remote_tlbs(kvm); + } else { + spin_lock(&kvm->mmu_lock); + kvm_mmu_slot_remove_write_access(kvm, memslot->id); + spin_unlock(&kvm->mmu_lock); + } +} + /* * Get (and clear) the dirty memory log for a memory slot. */ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log) { - int r, i; + int r; struct kvm_memory_slot *memslot; - unsigned long n; - unsigned long is_dirty = 0; + unsigned long n, nr_dirty_pages; mutex_lock(&kvm->slots_lock); @@ -3478,43 +3010,41 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, if (log->slot >= KVM_MEMORY_SLOTS) goto out; - memslot = &kvm->memslots->memslots[log->slot]; + memslot = id_to_memslot(kvm->memslots, log->slot); r = -ENOENT; if (!memslot->dirty_bitmap) goto out; n = kvm_dirty_bitmap_bytes(memslot); - - for (i = 0; !is_dirty && i < n/sizeof(long); i++) - is_dirty = memslot->dirty_bitmap[i]; + nr_dirty_pages = memslot->nr_dirty_pages; /* If nothing is dirty, don't bother messing with page tables. */ - if (is_dirty) { + if (nr_dirty_pages) { struct kvm_memslots *slots, *old_slots; - unsigned long *dirty_bitmap; + unsigned long *dirty_bitmap, *dirty_bitmap_head; - dirty_bitmap = memslot->dirty_bitmap_head; - if (memslot->dirty_bitmap == dirty_bitmap) - dirty_bitmap += n / sizeof(long); - memset(dirty_bitmap, 0, n); + dirty_bitmap = memslot->dirty_bitmap; + dirty_bitmap_head = memslot->dirty_bitmap_head; + if (dirty_bitmap == dirty_bitmap_head) + dirty_bitmap_head += n / sizeof(long); + memset(dirty_bitmap_head, 0, n); r = -ENOMEM; - slots = kzalloc(sizeof(struct kvm_memslots), GFP_KERNEL); + slots = kmemdup(kvm->memslots, sizeof(*kvm->memslots), GFP_KERNEL); if (!slots) goto out; - memcpy(slots, kvm->memslots, sizeof(struct kvm_memslots)); - slots->memslots[log->slot].dirty_bitmap = dirty_bitmap; - slots->generation++; + + memslot = id_to_memslot(slots, log->slot); + memslot->nr_dirty_pages = 0; + memslot->dirty_bitmap = dirty_bitmap_head; + update_memslots(slots, NULL); old_slots = kvm->memslots; rcu_assign_pointer(kvm->memslots, slots); synchronize_srcu_expedited(&kvm->srcu); - dirty_bitmap = old_slots->memslots[log->slot].dirty_bitmap; kfree(old_slots); - spin_lock(&kvm->mmu_lock); - kvm_mmu_slot_remove_write_access(kvm, log->slot); - spin_unlock(&kvm->mmu_lock); + write_protect_slot(kvm, memslot, dirty_bitmap, nr_dirty_pages); r = -EFAULT; if (copy_to_user(log->dirty_bitmap, dirty_bitmap, n)) @@ -3659,14 +3189,14 @@ long kvm_arch_vm_ioctl(struct file *filp, } case KVM_GET_IRQCHIP: { /* 0: PIC master, 1: PIC slave, 2: IOAPIC */ - struct kvm_irqchip *chip = kmalloc(sizeof(*chip), GFP_KERNEL); + struct kvm_irqchip *chip; - r = -ENOMEM; - if (!chip) + chip = memdup_user(argp, sizeof(*chip)); + if (IS_ERR(chip)) { + r = PTR_ERR(chip); goto out; - r = -EFAULT; - if (copy_from_user(chip, argp, sizeof *chip)) - goto get_irqchip_out; + } + r = -ENXIO; if (!irqchip_in_kernel(kvm)) goto get_irqchip_out; @@ -3685,14 +3215,14 @@ long kvm_arch_vm_ioctl(struct file *filp, } case KVM_SET_IRQCHIP: { /* 0: PIC master, 1: PIC slave, 2: IOAPIC */ - struct kvm_irqchip *chip = kmalloc(sizeof(*chip), GFP_KERNEL); + struct kvm_irqchip *chip; - r = -ENOMEM; - if (!chip) + chip = memdup_user(argp, sizeof(*chip)); + if (IS_ERR(chip)) { + r = PTR_ERR(chip); goto out; - r = -EFAULT; - if (copy_from_user(chip, argp, sizeof *chip)) - goto set_irqchip_out; + } + r = -ENXIO; if (!irqchip_in_kernel(kvm)) goto set_irqchip_out; @@ -3899,12 +3429,7 @@ void kvm_get_segment(struct kvm_vcpu *vcpu, kvm_x86_ops->get_segment(vcpu, var, seg); } -static gpa_t translate_gpa(struct kvm_vcpu *vcpu, gpa_t gpa, u32 access) -{ - return gpa; -} - -static gpa_t translate_nested_gpa(struct kvm_vcpu *vcpu, gpa_t gpa, u32 access) +gpa_t translate_nested_gpa(struct kvm_vcpu *vcpu, gpa_t gpa, u32 access) { gpa_t t_gpa; struct x86_exception exception; @@ -4088,7 +3613,7 @@ int emulator_write_phys(struct kvm_vcpu *vcpu, gpa_t gpa, ret = kvm_write_guest(vcpu->kvm, gpa, val, bytes); if (ret < 0) return 0; - kvm_mmu_pte_write(vcpu, gpa, val, bytes, 1); + kvm_mmu_pte_write(vcpu, gpa, val, bytes); return 1; } @@ -4325,7 +3850,7 @@ static int emulator_cmpxchg_emulated(struct x86_emulate_ctxt *ctxt, if (!exchanged) return X86EMUL_CMPXCHG_FAILED; - kvm_mmu_pte_write(vcpu, gpa, new, bytes, 1); + kvm_mmu_pte_write(vcpu, gpa, new, bytes); return X86EMUL_CONTINUE; @@ -4350,32 +3875,24 @@ static int kernel_pio(struct kvm_vcpu *vcpu, void *pd) return r; } - -static int emulator_pio_in_emulated(struct x86_emulate_ctxt *ctxt, - int size, unsigned short port, void *val, - unsigned int count) +static int emulator_pio_in_out(struct kvm_vcpu *vcpu, int size, + unsigned short port, void *val, + unsigned int count, bool in) { - struct kvm_vcpu *vcpu = emul_to_vcpu(ctxt); - - if (vcpu->arch.pio.count) - goto data_avail; - - trace_kvm_pio(0, port, size, count); + trace_kvm_pio(!in, port, size, count); vcpu->arch.pio.port = port; - vcpu->arch.pio.in = 1; + vcpu->arch.pio.in = in; vcpu->arch.pio.count = count; vcpu->arch.pio.size = size; if (!kernel_pio(vcpu, vcpu->arch.pio_data)) { - data_avail: - memcpy(val, vcpu->arch.pio_data, size * count); vcpu->arch.pio.count = 0; return 1; } vcpu->run->exit_reason = KVM_EXIT_IO; - vcpu->run->io.direction = KVM_EXIT_IO_IN; + vcpu->run->io.direction = in ? KVM_EXIT_IO_IN : KVM_EXIT_IO_OUT; vcpu->run->io.size = size; vcpu->run->io.data_offset = KVM_PIO_PAGE_OFFSET * PAGE_SIZE; vcpu->run->io.count = count; @@ -4384,36 +3901,37 @@ static int emulator_pio_in_emulated(struct x86_emulate_ctxt *ctxt, return 0; } -static int emulator_pio_out_emulated(struct x86_emulate_ctxt *ctxt, - int size, unsigned short port, - const void *val, unsigned int count) +static int emulator_pio_in_emulated(struct x86_emulate_ctxt *ctxt, + int size, unsigned short port, void *val, + unsigned int count) { struct kvm_vcpu *vcpu = emul_to_vcpu(ctxt); + int ret; - trace_kvm_pio(1, port, size, count); - - vcpu->arch.pio.port = port; - vcpu->arch.pio.in = 0; - vcpu->arch.pio.count = count; - vcpu->arch.pio.size = size; - - memcpy(vcpu->arch.pio_data, val, size * count); + if (vcpu->arch.pio.count) + goto data_avail; - if (!kernel_pio(vcpu, vcpu->arch.pio_data)) { + ret = emulator_pio_in_out(vcpu, size, port, val, count, true); + if (ret) { +data_avail: + memcpy(val, vcpu->arch.pio_data, size * count); vcpu->arch.pio.count = 0; return 1; } - vcpu->run->exit_reason = KVM_EXIT_IO; - vcpu->run->io.direction = KVM_EXIT_IO_OUT; - vcpu->run->io.size = size; - vcpu->run->io.data_offset = KVM_PIO_PAGE_OFFSET * PAGE_SIZE; - vcpu->run->io.count = count; - vcpu->run->io.port = port; - return 0; } +static int emulator_pio_out_emulated(struct x86_emulate_ctxt *ctxt, + int size, unsigned short port, + const void *val, unsigned int count) +{ + struct kvm_vcpu *vcpu = emul_to_vcpu(ctxt); + + memcpy(vcpu->arch.pio_data, val, size * count); + return emulator_pio_in_out(vcpu, size, port, (void *)val, count, false); +} + static unsigned long get_segment_base(struct kvm_vcpu *vcpu, int seg) { return kvm_x86_ops->get_segment_base(vcpu, seg); @@ -4628,6 +4146,12 @@ static int emulator_set_msr(struct x86_emulate_ctxt *ctxt, return kvm_set_msr(emul_to_vcpu(ctxt), msr_index, data); } +static int emulator_read_pmc(struct x86_emulate_ctxt *ctxt, + u32 pmc, u64 *pdata) +{ + return kvm_pmu_read_pmc(emul_to_vcpu(ctxt), pmc, pdata); +} + static void emulator_halt(struct x86_emulate_ctxt *ctxt) { emul_to_vcpu(ctxt)->arch.halt_request = 1; @@ -4680,6 +4204,7 @@ static struct x86_emulate_ops emulate_ops = { .set_dr = emulator_set_dr, .set_msr = emulator_set_msr, .get_msr = emulator_get_msr, + .read_pmc = emulator_read_pmc, .halt = emulator_halt, .wbinvd = emulator_wbinvd, .fix_hypercall = emulator_fix_hypercall, @@ -4837,6 +4362,50 @@ static bool reexecute_instruction(struct kvm_vcpu *vcpu, gva_t gva) return false; } +static bool retry_instruction(struct x86_emulate_ctxt *ctxt, + unsigned long cr2, int emulation_type) +{ + struct kvm_vcpu *vcpu = emul_to_vcpu(ctxt); + unsigned long last_retry_eip, last_retry_addr, gpa = cr2; + + last_retry_eip = vcpu->arch.last_retry_eip; + last_retry_addr = vcpu->arch.last_retry_addr; + + /* + * If the emulation is caused by #PF and it is non-page_table + * writing instruction, it means the VM-EXIT is caused by shadow + * page protected, we can zap the shadow page and retry this + * instruction directly. + * + * Note: if the guest uses a non-page-table modifying instruction + * on the PDE that points to the instruction, then we will unmap + * the instruction and go to an infinite loop. So, we cache the + * last retried eip and the last fault address, if we meet the eip + * and the address again, we can break out of the potential infinite + * loop. + */ + vcpu->arch.last_retry_eip = vcpu->arch.last_retry_addr = 0; + + if (!(emulation_type & EMULTYPE_RETRY)) + return false; + + if (x86_page_table_writing_insn(ctxt)) + return false; + + if (ctxt->eip == last_retry_eip && last_retry_addr == cr2) + return false; + + vcpu->arch.last_retry_eip = ctxt->eip; + vcpu->arch.last_retry_addr = cr2; + + if (!vcpu->arch.mmu.direct_map) + gpa = kvm_mmu_gva_to_gpa_write(vcpu, cr2, NULL); + + kvm_mmu_unprotect_page(vcpu->kvm, gpa >> PAGE_SHIFT); + + return true; +} + int x86_emulate_instruction(struct kvm_vcpu *vcpu, unsigned long cr2, int emulation_type, @@ -4878,6 +4447,9 @@ int x86_emulate_instruction(struct kvm_vcpu *vcpu, return EMULATE_DONE; } + if (retry_instruction(ctxt, cr2, emulation_type)) + return EMULATE_DONE; + /* this is needed for vmware backdoor interface to work since it changes registers values during IO operation */ if (vcpu->arch.emulate_regs_need_sync_from_vcpu) { @@ -5096,17 +4668,17 @@ static void kvm_timer_init(void) static DEFINE_PER_CPU(struct kvm_vcpu *, current_vcpu); -static int kvm_is_in_guest(void) +int kvm_is_in_guest(void) { - return percpu_read(current_vcpu) != NULL; + return __this_cpu_read(current_vcpu) != NULL; } static int kvm_is_user_mode(void) { int user_mode = 3; - if (percpu_read(current_vcpu)) - user_mode = kvm_x86_ops->get_cpl(percpu_read(current_vcpu)); + if (__this_cpu_read(current_vcpu)) + user_mode = kvm_x86_ops->get_cpl(__this_cpu_read(current_vcpu)); return user_mode != 0; } @@ -5115,8 +4687,8 @@ static unsigned long kvm_get_guest_ip(void) { unsigned long ip = 0; - if (percpu_read(current_vcpu)) - ip = kvm_rip_read(percpu_read(current_vcpu)); + if (__this_cpu_read(current_vcpu)) + ip = kvm_rip_read(__this_cpu_read(current_vcpu)); return ip; } @@ -5129,13 +4701,13 @@ static struct perf_guest_info_callbacks kvm_guest_cbs = { void kvm_before_handle_nmi(struct kvm_vcpu *vcpu) { - percpu_write(current_vcpu, vcpu); + __this_cpu_write(current_vcpu, vcpu); } EXPORT_SYMBOL_GPL(kvm_before_handle_nmi); void kvm_after_handle_nmi(struct kvm_vcpu *vcpu) { - percpu_write(current_vcpu, NULL); + __this_cpu_write(current_vcpu, NULL); } EXPORT_SYMBOL_GPL(kvm_after_handle_nmi); @@ -5234,15 +4806,6 @@ int kvm_emulate_halt(struct kvm_vcpu *vcpu) } EXPORT_SYMBOL_GPL(kvm_emulate_halt); -static inline gpa_t hc_gpa(struct kvm_vcpu *vcpu, unsigned long a0, - unsigned long a1) -{ - if (is_long_mode(vcpu)) - return a0; - else - return a0 | ((gpa_t)a1 << 32); -} - int kvm_hv_hypercall(struct kvm_vcpu *vcpu) { u64 param, ingpa, outgpa, ret; @@ -5338,9 +4901,6 @@ int kvm_emulate_hypercall(struct kvm_vcpu *vcpu) case KVM_HC_VAPIC_POLL_IRQ: ret = 0; break; - case KVM_HC_MMU_OP: - r = kvm_pv_mmu_op(vcpu, a0, hc_gpa(vcpu, a1, a2), &ret); - break; default: ret = -KVM_ENOSYS; break; @@ -5370,125 +4930,6 @@ int emulator_fix_hypercall(struct x86_emulate_ctxt *ctxt) return emulator_write_emulated(ctxt, rip, instruction, 3, NULL); } -static int move_to_next_stateful_cpuid_entry(struct kvm_vcpu *vcpu, int i) -{ - struct kvm_cpuid_entry2 *e = &vcpu->arch.cpuid_entries[i]; - int j, nent = vcpu->arch.cpuid_nent; - - e->flags &= ~KVM_CPUID_FLAG_STATE_READ_NEXT; - /* when no next entry is found, the current entry[i] is reselected */ - for (j = i + 1; ; j = (j + 1) % nent) { - struct kvm_cpuid_entry2 *ej = &vcpu->arch.cpuid_entries[j]; - if (ej->function == e->function) { - ej->flags |= KVM_CPUID_FLAG_STATE_READ_NEXT; - return j; - } - } - return 0; /* silence gcc, even though control never reaches here */ -} - -/* find an entry with matching function, matching index (if needed), and that - * should be read next (if it's stateful) */ -static int is_matching_cpuid_entry(struct kvm_cpuid_entry2 *e, - u32 function, u32 index) -{ - if (e->function != function) - return 0; - if ((e->flags & KVM_CPUID_FLAG_SIGNIFCANT_INDEX) && e->index != index) - return 0; - if ((e->flags & KVM_CPUID_FLAG_STATEFUL_FUNC) && - !(e->flags & KVM_CPUID_FLAG_STATE_READ_NEXT)) - return 0; - return 1; -} - -struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu, - u32 function, u32 index) -{ - int i; - struct kvm_cpuid_entry2 *best = NULL; - - for (i = 0; i < vcpu->arch.cpuid_nent; ++i) { - struct kvm_cpuid_entry2 *e; - - e = &vcpu->arch.cpuid_entries[i]; - if (is_matching_cpuid_entry(e, function, index)) { - if (e->flags & KVM_CPUID_FLAG_STATEFUL_FUNC) - move_to_next_stateful_cpuid_entry(vcpu, i); - best = e; - break; - } - } - return best; -} -EXPORT_SYMBOL_GPL(kvm_find_cpuid_entry); - -int cpuid_maxphyaddr(struct kvm_vcpu *vcpu) -{ - struct kvm_cpuid_entry2 *best; - - best = kvm_find_cpuid_entry(vcpu, 0x80000000, 0); - if (!best || best->eax < 0x80000008) - goto not_found; - best = kvm_find_cpuid_entry(vcpu, 0x80000008, 0); - if (best) - return best->eax & 0xff; -not_found: - return 36; -} - -/* - * If no match is found, check whether we exceed the vCPU's limit - * and return the content of the highest valid _standard_ leaf instead. - * This is to satisfy the CPUID specification. - */ -static struct kvm_cpuid_entry2* check_cpuid_limit(struct kvm_vcpu *vcpu, - u32 function, u32 index) -{ - struct kvm_cpuid_entry2 *maxlevel; - - maxlevel = kvm_find_cpuid_entry(vcpu, function & 0x80000000, 0); - if (!maxlevel || maxlevel->eax >= function) - return NULL; - if (function & 0x80000000) { - maxlevel = kvm_find_cpuid_entry(vcpu, 0, 0); - if (!maxlevel) - return NULL; - } - return kvm_find_cpuid_entry(vcpu, maxlevel->eax, index); -} - -void kvm_emulate_cpuid(struct kvm_vcpu *vcpu) -{ - u32 function, index; - struct kvm_cpuid_entry2 *best; - - function = kvm_register_read(vcpu, VCPU_REGS_RAX); - index = kvm_register_read(vcpu, VCPU_REGS_RCX); - kvm_register_write(vcpu, VCPU_REGS_RAX, 0); - kvm_register_write(vcpu, VCPU_REGS_RBX, 0); - kvm_register_write(vcpu, VCPU_REGS_RCX, 0); - kvm_register_write(vcpu, VCPU_REGS_RDX, 0); - best = kvm_find_cpuid_entry(vcpu, function, index); - - if (!best) - best = check_cpuid_limit(vcpu, function, index); - - if (best) { - kvm_register_write(vcpu, VCPU_REGS_RAX, best->eax); - kvm_register_write(vcpu, VCPU_REGS_RBX, best->ebx); - kvm_register_write(vcpu, VCPU_REGS_RCX, best->ecx); - kvm_register_write(vcpu, VCPU_REGS_RDX, best->edx); - } - kvm_x86_ops->skip_emulated_instruction(vcpu); - trace_kvm_cpuid(function, - kvm_register_read(vcpu, VCPU_REGS_RAX), - kvm_register_read(vcpu, VCPU_REGS_RBX), - kvm_register_read(vcpu, VCPU_REGS_RCX), - kvm_register_read(vcpu, VCPU_REGS_RDX)); -} -EXPORT_SYMBOL_GPL(kvm_emulate_cpuid); - /* * Check if userspace requested an interrupt window, and that the * interrupt window is open. @@ -5649,6 +5090,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu) int r; bool req_int_win = !irqchip_in_kernel(vcpu->kvm) && vcpu->run->request_interrupt_window; + bool req_immediate_exit = 0; if (vcpu->requests) { if (kvm_check_request(KVM_REQ_MMU_RELOAD, vcpu)) @@ -5688,7 +5130,12 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu) record_steal_time(vcpu); if (kvm_check_request(KVM_REQ_NMI, vcpu)) process_nmi(vcpu); - + req_immediate_exit = + kvm_check_request(KVM_REQ_IMMEDIATE_EXIT, vcpu); + if (kvm_check_request(KVM_REQ_PMU, vcpu)) + kvm_handle_pmu_event(vcpu); + if (kvm_check_request(KVM_REQ_PMI, vcpu)) + kvm_deliver_pmi(vcpu); } r = kvm_mmu_reload(vcpu); @@ -5739,6 +5186,9 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu) srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx); + if (req_immediate_exit) + smp_send_reschedule(vcpu->cpu); + kvm_guest_enter(); if (unlikely(vcpu->arch.switch_db_regs)) { @@ -5944,10 +5394,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) if (r <= 0) goto out; - if (kvm_run->exit_reason == KVM_EXIT_HYPERCALL) - kvm_register_write(vcpu, VCPU_REGS_RAX, - kvm_run->hypercall.ret); - r = __vcpu_run(vcpu); out: @@ -6149,7 +5595,7 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu, mmu_reset_needed |= kvm_read_cr4(vcpu) != sregs->cr4; kvm_x86_ops->set_cr4(vcpu, sregs->cr4); if (sregs->cr4 & X86_CR4_OSXSAVE) - update_cpuid(vcpu); + kvm_update_cpuid(vcpu); idx = srcu_read_lock(&vcpu->kvm->srcu); if (!is_long_mode(vcpu) && is_pae(vcpu)) { @@ -6426,6 +5872,8 @@ int kvm_arch_vcpu_reset(struct kvm_vcpu *vcpu) kvm_async_pf_hash_reset(vcpu); vcpu->arch.apf.halted = false; + kvm_pmu_reset(vcpu); + return kvm_x86_ops->vcpu_reset(vcpu); } @@ -6474,10 +5922,6 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) kvm = vcpu->kvm; vcpu->arch.emulate_ctxt.ops = &emulate_ops; - vcpu->arch.walk_mmu = &vcpu->arch.mmu; - vcpu->arch.mmu.root_hpa = INVALID_PAGE; - vcpu->arch.mmu.translate_gpa = translate_gpa; - vcpu->arch.nested_mmu.translate_gpa = translate_nested_gpa; if (!irqchip_in_kernel(kvm) || kvm_vcpu_is_bsp(vcpu)) vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE; else @@ -6514,6 +5958,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) goto fail_free_mce_banks; kvm_async_pf_hash_reset(vcpu); + kvm_pmu_init(vcpu); return 0; fail_free_mce_banks: @@ -6532,6 +5977,7 @@ void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) { int idx; + kvm_pmu_destroy(vcpu); kfree(vcpu->arch.mce_banks); kvm_free_lapic(vcpu); idx = srcu_read_lock(&vcpu->kvm->srcu); diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h index d36fe237c665..cb80c293cdd8 100644 --- a/arch/x86/kvm/x86.h +++ b/arch/x86/kvm/x86.h @@ -33,9 +33,6 @@ static inline bool kvm_exception_is_soft(unsigned int nr) return (nr == BP_VECTOR) || (nr == OF_VECTOR); } -struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu, - u32 function, u32 index); - static inline bool is_protmode(struct kvm_vcpu *vcpu) { return kvm_read_cr0_bits(vcpu, X86_CR0_PE); @@ -125,4 +122,6 @@ int kvm_write_guest_virt_system(struct x86_emulate_ctxt *ctxt, gva_t addr, void *val, unsigned int bytes, struct x86_exception *exception); +extern u64 host_xcr0; + #endif diff --git a/arch/x86/lib/inat.c b/arch/x86/lib/inat.c index 46fc4ee09fc4..88ad5fbda6e1 100644 --- a/arch/x86/lib/inat.c +++ b/arch/x86/lib/inat.c @@ -82,9 +82,16 @@ insn_attr_t inat_get_avx_attribute(insn_byte_t opcode, insn_byte_t vex_m, const insn_attr_t *table; if (vex_m > X86_VEX_M_MAX || vex_p > INAT_LSTPFX_MAX) return 0; - table = inat_avx_tables[vex_m][vex_p]; + /* At first, this checks the master table */ + table = inat_avx_tables[vex_m][0]; if (!table) return 0; + if (!inat_is_group(table[opcode]) && vex_p) { + /* If this is not a group, get attribute directly */ + table = inat_avx_tables[vex_m][vex_p]; + if (!table) + return 0; + } return table[opcode]; } diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c index 374562ed6704..5a1f9f3e3fbb 100644 --- a/arch/x86/lib/insn.c +++ b/arch/x86/lib/insn.c @@ -202,7 +202,7 @@ void insn_get_opcode(struct insn *insn) m = insn_vex_m_bits(insn); p = insn_vex_p_bits(insn); insn->attr = inat_get_avx_attribute(op, m, p); - if (!inat_accept_vex(insn->attr)) + if (!inat_accept_vex(insn->attr) && !inat_is_group(insn->attr)) insn->attr = 0; /* This instruction is bad */ goto end; /* VEX has only 1 byte for opcode */ } @@ -249,6 +249,8 @@ void insn_get_modrm(struct insn *insn) pfx = insn_last_prefix(insn); insn->attr = inat_get_group_attribute(mod, pfx, insn->attr); + if (insn_is_avx(insn) && !inat_accept_vex(insn->attr)) + insn->attr = 0; /* This is bad */ } } diff --git a/arch/x86/lib/string_32.c b/arch/x86/lib/string_32.c index 82004d2bf05e..bd59090825db 100644 --- a/arch/x86/lib/string_32.c +++ b/arch/x86/lib/string_32.c @@ -164,15 +164,13 @@ EXPORT_SYMBOL(strchr); size_t strlen(const char *s) { int d0; - int res; + size_t res; asm volatile("repne\n\t" - "scasb\n\t" - "notl %0\n\t" - "decl %0" + "scasb" : "=c" (res), "=&D" (d0) : "1" (s), "a" (0), "0" (0xffffffffu) : "memory"); - return res; + return ~res - 1; } EXPORT_SYMBOL(strlen); #endif diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt index a793da5e560e..5b83c51c12e0 100644 --- a/arch/x86/lib/x86-opcode-map.txt +++ b/arch/x86/lib/x86-opcode-map.txt @@ -1,5 +1,11 @@ # x86 Opcode Maps # +# This is (mostly) based on following documentations. +# - Intel(R) 64 and IA-32 Architectures Software Developer's Manual Vol.2 +# (#325383-040US, October 2011) +# - Intel(R) Advanced Vector Extensions Programming Reference +# (#319433-011,JUNE 2011). +# #<Opcode maps> # Table: table-name # Referrer: escaped-name @@ -15,10 +21,13 @@ # EndTable # # AVX Superscripts -# (VEX): this opcode can accept VEX prefix. -# (oVEX): this opcode requires VEX prefix. -# (o128): this opcode only supports 128bit VEX. -# (o256): this opcode only supports 256bit VEX. +# (v): this opcode requires VEX prefix. +# (v1): this opcode only supports 128bit VEX. +# +# Last Prefix Superscripts +# - (66): the last prefix is 0x66 +# - (F3): the last prefix is 0xF3 +# - (F2): the last prefix is 0xF2 # Table: one byte opcode @@ -199,8 +208,8 @@ a0: MOV AL,Ob a1: MOV rAX,Ov a2: MOV Ob,AL a3: MOV Ov,rAX -a4: MOVS/B Xb,Yb -a5: MOVS/W/D/Q Xv,Yv +a4: MOVS/B Yb,Xb +a5: MOVS/W/D/Q Yv,Xv a6: CMPS/B Xb,Yb a7: CMPS/W/D Xv,Yv a8: TEST AL,Ib @@ -233,8 +242,8 @@ c0: Grp2 Eb,Ib (1A) c1: Grp2 Ev,Ib (1A) c2: RETN Iw (f64) c3: RETN -c4: LES Gz,Mp (i64) | 3bytes-VEX (Prefix) -c5: LDS Gz,Mp (i64) | 2bytes-VEX (Prefix) +c4: LES Gz,Mp (i64) | VEX+2byte (Prefix) +c5: LDS Gz,Mp (i64) | VEX+1byte (Prefix) c6: Grp11 Eb,Ib (1A) c7: Grp11 Ev,Iz (1A) c8: ENTER Iw,Ib @@ -320,14 +329,19 @@ AVXcode: 1 # 3DNow! uses the last imm byte as opcode extension. 0f: 3DNow! Pq,Qq,Ib # 0x0f 0x10-0x1f -10: movups Vps,Wps (VEX) | movss Vss,Wss (F3),(VEX),(o128) | movupd Vpd,Wpd (66),(VEX) | movsd Vsd,Wsd (F2),(VEX),(o128) -11: movups Wps,Vps (VEX) | movss Wss,Vss (F3),(VEX),(o128) | movupd Wpd,Vpd (66),(VEX) | movsd Wsd,Vsd (F2),(VEX),(o128) -12: movlps Vq,Mq (VEX),(o128) | movlpd Vq,Mq (66),(VEX),(o128) | movhlps Vq,Uq (VEX),(o128) | movddup Vq,Wq (F2),(VEX) | movsldup Vq,Wq (F3),(VEX) -13: mpvlps Mq,Vq (VEX),(o128) | movlpd Mq,Vq (66),(VEX),(o128) -14: unpcklps Vps,Wq (VEX) | unpcklpd Vpd,Wq (66),(VEX) -15: unpckhps Vps,Wq (VEX) | unpckhpd Vpd,Wq (66),(VEX) -16: movhps Vq,Mq (VEX),(o128) | movhpd Vq,Mq (66),(VEX),(o128) | movlsps Vq,Uq (VEX),(o128) | movshdup Vq,Wq (F3),(VEX) -17: movhps Mq,Vq (VEX),(o128) | movhpd Mq,Vq (66),(VEX),(o128) +# NOTE: According to Intel SDM opcode map, vmovups and vmovupd has no operands +# but it actually has operands. And also, vmovss and vmovsd only accept 128bit. +# MOVSS/MOVSD has too many forms(3) on SDM. This map just shows a typical form. +# Many AVX instructions lack v1 superscript, according to Intel AVX-Prgramming +# Reference A.1 +10: vmovups Vps,Wps | vmovupd Vpd,Wpd (66) | vmovss Vx,Hx,Wss (F3),(v1) | vmovsd Vx,Hx,Wsd (F2),(v1) +11: vmovups Wps,Vps | vmovupd Wpd,Vpd (66) | vmovss Wss,Hx,Vss (F3),(v1) | vmovsd Wsd,Hx,Vsd (F2),(v1) +12: vmovlps Vq,Hq,Mq (v1) | vmovhlps Vq,Hq,Uq (v1) | vmovlpd Vq,Hq,Mq (66),(v1) | vmovsldup Vx,Wx (F3) | vmovddup Vx,Wx (F2) +13: vmovlps Mq,Vq (v1) | vmovlpd Mq,Vq (66),(v1) +14: vunpcklps Vx,Hx,Wx | vunpcklpd Vx,Hx,Wx (66) +15: vunpckhps Vx,Hx,Wx | vunpckhpd Vx,Hx,Wx (66) +16: vmovhps Vdq,Hq,Mq (v1) | vmovlhps Vdq,Hq,Uq (v1) | vmovhpd Vdq,Hq,Mq (66),(v1) | vmovshdup Vx,Wx (F3) +17: vmovhps Mq,Vq (v1) | vmovhpd Mq,Vq (66),(v1) 18: Grp16 (1A) 19: 1a: @@ -345,14 +359,14 @@ AVXcode: 1 25: 26: 27: -28: movaps Vps,Wps (VEX) | movapd Vpd,Wpd (66),(VEX) -29: movaps Wps,Vps (VEX) | movapd Wpd,Vpd (66),(VEX) -2a: cvtpi2ps Vps,Qpi | cvtsi2ss Vss,Ed/q (F3),(VEX),(o128) | cvtpi2pd Vpd,Qpi (66) | cvtsi2sd Vsd,Ed/q (F2),(VEX),(o128) -2b: movntps Mps,Vps (VEX) | movntpd Mpd,Vpd (66),(VEX) -2c: cvttps2pi Ppi,Wps | cvttss2si Gd/q,Wss (F3),(VEX),(o128) | cvttpd2pi Ppi,Wpd (66) | cvttsd2si Gd/q,Wsd (F2),(VEX),(o128) -2d: cvtps2pi Ppi,Wps | cvtss2si Gd/q,Wss (F3),(VEX),(o128) | cvtpd2pi Qpi,Wpd (66) | cvtsd2si Gd/q,Wsd (F2),(VEX),(o128) -2e: ucomiss Vss,Wss (VEX),(o128) | ucomisd Vsd,Wsd (66),(VEX),(o128) -2f: comiss Vss,Wss (VEX),(o128) | comisd Vsd,Wsd (66),(VEX),(o128) +28: vmovaps Vps,Wps | vmovapd Vpd,Wpd (66) +29: vmovaps Wps,Vps | vmovapd Wpd,Vpd (66) +2a: cvtpi2ps Vps,Qpi | cvtpi2pd Vpd,Qpi (66) | vcvtsi2ss Vss,Hss,Ey (F3),(v1) | vcvtsi2sd Vsd,Hsd,Ey (F2),(v1) +2b: vmovntps Mps,Vps | vmovntpd Mpd,Vpd (66) +2c: cvttps2pi Ppi,Wps | cvttpd2pi Ppi,Wpd (66) | vcvttss2si Gy,Wss (F3),(v1) | vcvttsd2si Gy,Wsd (F2),(v1) +2d: cvtps2pi Ppi,Wps | cvtpd2pi Qpi,Wpd (66) | vcvtss2si Gy,Wss (F3),(v1) | vcvtsd2si Gy,Wsd (F2),(v1) +2e: vucomiss Vss,Wss (v1) | vucomisd Vsd,Wsd (66),(v1) +2f: vcomiss Vss,Wss (v1) | vcomisd Vsd,Wsd (66),(v1) # 0x0f 0x30-0x3f 30: WRMSR 31: RDTSC @@ -388,65 +402,66 @@ AVXcode: 1 4e: CMOVLE/NG Gv,Ev 4f: CMOVNLE/G Gv,Ev # 0x0f 0x50-0x5f -50: movmskps Gd/q,Ups (VEX) | movmskpd Gd/q,Upd (66),(VEX) -51: sqrtps Vps,Wps (VEX) | sqrtss Vss,Wss (F3),(VEX),(o128) | sqrtpd Vpd,Wpd (66),(VEX) | sqrtsd Vsd,Wsd (F2),(VEX),(o128) -52: rsqrtps Vps,Wps (VEX) | rsqrtss Vss,Wss (F3),(VEX),(o128) -53: rcpps Vps,Wps (VEX) | rcpss Vss,Wss (F3),(VEX),(o128) -54: andps Vps,Wps (VEX) | andpd Vpd,Wpd (66),(VEX) -55: andnps Vps,Wps (VEX) | andnpd Vpd,Wpd (66),(VEX) -56: orps Vps,Wps (VEX) | orpd Vpd,Wpd (66),(VEX) -57: xorps Vps,Wps (VEX) | xorpd Vpd,Wpd (66),(VEX) -58: addps Vps,Wps (VEX) | addss Vss,Wss (F3),(VEX),(o128) | addpd Vpd,Wpd (66),(VEX) | addsd Vsd,Wsd (F2),(VEX),(o128) -59: mulps Vps,Wps (VEX) | mulss Vss,Wss (F3),(VEX),(o128) | mulpd Vpd,Wpd (66),(VEX) | mulsd Vsd,Wsd (F2),(VEX),(o128) -5a: cvtps2pd Vpd,Wps (VEX) | cvtss2sd Vsd,Wss (F3),(VEX),(o128) | cvtpd2ps Vps,Wpd (66),(VEX) | cvtsd2ss Vsd,Wsd (F2),(VEX),(o128) -5b: cvtdq2ps Vps,Wdq (VEX) | cvtps2dq Vdq,Wps (66),(VEX) | cvttps2dq Vdq,Wps (F3),(VEX) -5c: subps Vps,Wps (VEX) | subss Vss,Wss (F3),(VEX),(o128) | subpd Vpd,Wpd (66),(VEX) | subsd Vsd,Wsd (F2),(VEX),(o128) -5d: minps Vps,Wps (VEX) | minss Vss,Wss (F3),(VEX),(o128) | minpd Vpd,Wpd (66),(VEX) | minsd Vsd,Wsd (F2),(VEX),(o128) -5e: divps Vps,Wps (VEX) | divss Vss,Wss (F3),(VEX),(o128) | divpd Vpd,Wpd (66),(VEX) | divsd Vsd,Wsd (F2),(VEX),(o128) -5f: maxps Vps,Wps (VEX) | maxss Vss,Wss (F3),(VEX),(o128) | maxpd Vpd,Wpd (66),(VEX) | maxsd Vsd,Wsd (F2),(VEX),(o128) +50: vmovmskps Gy,Ups | vmovmskpd Gy,Upd (66) +51: vsqrtps Vps,Wps | vsqrtpd Vpd,Wpd (66) | vsqrtss Vss,Hss,Wss (F3),(v1) | vsqrtsd Vsd,Hsd,Wsd (F2),(v1) +52: vrsqrtps Vps,Wps | vrsqrtss Vss,Hss,Wss (F3),(v1) +53: vrcpps Vps,Wps | vrcpss Vss,Hss,Wss (F3),(v1) +54: vandps Vps,Hps,Wps | vandpd Vpd,Hpd,Wpd (66) +55: vandnps Vps,Hps,Wps | vandnpd Vpd,Hpd,Wpd (66) +56: vorps Vps,Hps,Wps | vorpd Vpd,Hpd,Wpd (66) +57: vxorps Vps,Hps,Wps | vxorpd Vpd,Hpd,Wpd (66) +58: vaddps Vps,Hps,Wps | vaddpd Vpd,Hpd,Wpd (66) | vaddss Vss,Hss,Wss (F3),(v1) | vaddsd Vsd,Hsd,Wsd (F2),(v1) +59: vmulps Vps,Hps,Wps | vmulpd Vpd,Hpd,Wpd (66) | vmulss Vss,Hss,Wss (F3),(v1) | vmulsd Vsd,Hsd,Wsd (F2),(v1) +5a: vcvtps2pd Vpd,Wps | vcvtpd2ps Vps,Wpd (66) | vcvtss2sd Vsd,Hx,Wss (F3),(v1) | vcvtsd2ss Vss,Hx,Wsd (F2),(v1) +5b: vcvtdq2ps Vps,Wdq | vcvtps2dq Vdq,Wps (66) | vcvttps2dq Vdq,Wps (F3) +5c: vsubps Vps,Hps,Wps | vsubpd Vpd,Hpd,Wpd (66) | vsubss Vss,Hss,Wss (F3),(v1) | vsubsd Vsd,Hsd,Wsd (F2),(v1) +5d: vminps Vps,Hps,Wps | vminpd Vpd,Hpd,Wpd (66) | vminss Vss,Hss,Wss (F3),(v1) | vminsd Vsd,Hsd,Wsd (F2),(v1) +5e: vdivps Vps,Hps,Wps | vdivpd Vpd,Hpd,Wpd (66) | vdivss Vss,Hss,Wss (F3),(v1) | vdivsd Vsd,Hsd,Wsd (F2),(v1) +5f: vmaxps Vps,Hps,Wps | vmaxpd Vpd,Hpd,Wpd (66) | vmaxss Vss,Hss,Wss (F3),(v1) | vmaxsd Vsd,Hsd,Wsd (F2),(v1) # 0x0f 0x60-0x6f -60: punpcklbw Pq,Qd | punpcklbw Vdq,Wdq (66),(VEX),(o128) -61: punpcklwd Pq,Qd | punpcklwd Vdq,Wdq (66),(VEX),(o128) -62: punpckldq Pq,Qd | punpckldq Vdq,Wdq (66),(VEX),(o128) -63: packsswb Pq,Qq | packsswb Vdq,Wdq (66),(VEX),(o128) -64: pcmpgtb Pq,Qq | pcmpgtb Vdq,Wdq (66),(VEX),(o128) -65: pcmpgtw Pq,Qq | pcmpgtw Vdq,Wdq (66),(VEX),(o128) -66: pcmpgtd Pq,Qq | pcmpgtd Vdq,Wdq (66),(VEX),(o128) -67: packuswb Pq,Qq | packuswb Vdq,Wdq (66),(VEX),(o128) -68: punpckhbw Pq,Qd | punpckhbw Vdq,Wdq (66),(VEX),(o128) -69: punpckhwd Pq,Qd | punpckhwd Vdq,Wdq (66),(VEX),(o128) -6a: punpckhdq Pq,Qd | punpckhdq Vdq,Wdq (66),(VEX),(o128) -6b: packssdw Pq,Qd | packssdw Vdq,Wdq (66),(VEX),(o128) -6c: punpcklqdq Vdq,Wdq (66),(VEX),(o128) -6d: punpckhqdq Vdq,Wdq (66),(VEX),(o128) -6e: movd/q/ Pd,Ed/q | movd/q Vdq,Ed/q (66),(VEX),(o128) -6f: movq Pq,Qq | movdqa Vdq,Wdq (66),(VEX) | movdqu Vdq,Wdq (F3),(VEX) +60: punpcklbw Pq,Qd | vpunpcklbw Vx,Hx,Wx (66),(v1) +61: punpcklwd Pq,Qd | vpunpcklwd Vx,Hx,Wx (66),(v1) +62: punpckldq Pq,Qd | vpunpckldq Vx,Hx,Wx (66),(v1) +63: packsswb Pq,Qq | vpacksswb Vx,Hx,Wx (66),(v1) +64: pcmpgtb Pq,Qq | vpcmpgtb Vx,Hx,Wx (66),(v1) +65: pcmpgtw Pq,Qq | vpcmpgtw Vx,Hx,Wx (66),(v1) +66: pcmpgtd Pq,Qq | vpcmpgtd Vx,Hx,Wx (66),(v1) +67: packuswb Pq,Qq | vpackuswb Vx,Hx,Wx (66),(v1) +68: punpckhbw Pq,Qd | vpunpckhbw Vx,Hx,Wx (66),(v1) +69: punpckhwd Pq,Qd | vpunpckhwd Vx,Hx,Wx (66),(v1) +6a: punpckhdq Pq,Qd | vpunpckhdq Vx,Hx,Wx (66),(v1) +6b: packssdw Pq,Qd | vpackssdw Vx,Hx,Wx (66),(v1) +6c: vpunpcklqdq Vx,Hx,Wx (66),(v1) +6d: vpunpckhqdq Vx,Hx,Wx (66),(v1) +6e: movd/q Pd,Ey | vmovd/q Vy,Ey (66),(v1) +6f: movq Pq,Qq | vmovdqa Vx,Wx (66) | vmovdqu Vx,Wx (F3) # 0x0f 0x70-0x7f -70: pshufw Pq,Qq,Ib | pshufd Vdq,Wdq,Ib (66),(VEX),(o128) | pshufhw Vdq,Wdq,Ib (F3),(VEX),(o128) | pshuflw VdqWdq,Ib (F2),(VEX),(o128) +70: pshufw Pq,Qq,Ib | vpshufd Vx,Wx,Ib (66),(v1) | vpshufhw Vx,Wx,Ib (F3),(v1) | vpshuflw Vx,Wx,Ib (F2),(v1) 71: Grp12 (1A) 72: Grp13 (1A) 73: Grp14 (1A) -74: pcmpeqb Pq,Qq | pcmpeqb Vdq,Wdq (66),(VEX),(o128) -75: pcmpeqw Pq,Qq | pcmpeqw Vdq,Wdq (66),(VEX),(o128) -76: pcmpeqd Pq,Qq | pcmpeqd Vdq,Wdq (66),(VEX),(o128) -77: emms/vzeroupper/vzeroall (VEX) -78: VMREAD Ed/q,Gd/q -79: VMWRITE Gd/q,Ed/q +74: pcmpeqb Pq,Qq | vpcmpeqb Vx,Hx,Wx (66),(v1) +75: pcmpeqw Pq,Qq | vpcmpeqw Vx,Hx,Wx (66),(v1) +76: pcmpeqd Pq,Qq | vpcmpeqd Vx,Hx,Wx (66),(v1) +# Note: Remove (v), because vzeroall and vzeroupper becomes emms without VEX. +77: emms | vzeroupper | vzeroall +78: VMREAD Ey,Gy +79: VMWRITE Gy,Ey 7a: 7b: -7c: haddps Vps,Wps (F2),(VEX) | haddpd Vpd,Wpd (66),(VEX) -7d: hsubps Vps,Wps (F2),(VEX) | hsubpd Vpd,Wpd (66),(VEX) -7e: movd/q Ed/q,Pd | movd/q Ed/q,Vdq (66),(VEX),(o128) | movq Vq,Wq (F3),(VEX),(o128) -7f: movq Qq,Pq | movdqa Wdq,Vdq (66),(VEX) | movdqu Wdq,Vdq (F3),(VEX) +7c: vhaddpd Vpd,Hpd,Wpd (66) | vhaddps Vps,Hps,Wps (F2) +7d: vhsubpd Vpd,Hpd,Wpd (66) | vhsubps Vps,Hps,Wps (F2) +7e: movd/q Ey,Pd | vmovd/q Ey,Vy (66),(v1) | vmovq Vq,Wq (F3),(v1) +7f: movq Qq,Pq | vmovdqa Wx,Vx (66) | vmovdqu Wx,Vx (F3) # 0x0f 0x80-0x8f 80: JO Jz (f64) 81: JNO Jz (f64) -82: JB/JNAE/JC Jz (f64) -83: JNB/JAE/JNC Jz (f64) -84: JZ/JE Jz (f64) -85: JNZ/JNE Jz (f64) +82: JB/JC/JNAE Jz (f64) +83: JAE/JNB/JNC Jz (f64) +84: JE/JZ Jz (f64) +85: JNE/JNZ Jz (f64) 86: JBE/JNA Jz (f64) -87: JNBE/JA Jz (f64) +87: JA/JNBE Jz (f64) 88: JS Jz (f64) 89: JNS Jz (f64) 8a: JP/JPE Jz (f64) @@ -502,18 +517,18 @@ b8: JMPE | POPCNT Gv,Ev (F3) b9: Grp10 (1A) ba: Grp8 Ev,Ib (1A) bb: BTC Ev,Gv -bc: BSF Gv,Ev -bd: BSR Gv,Ev +bc: BSF Gv,Ev | TZCNT Gv,Ev (F3) +bd: BSR Gv,Ev | LZCNT Gv,Ev (F3) be: MOVSX Gv,Eb bf: MOVSX Gv,Ew # 0x0f 0xc0-0xcf c0: XADD Eb,Gb c1: XADD Ev,Gv -c2: cmpps Vps,Wps,Ib (VEX) | cmpss Vss,Wss,Ib (F3),(VEX),(o128) | cmppd Vpd,Wpd,Ib (66),(VEX) | cmpsd Vsd,Wsd,Ib (F2),(VEX) -c3: movnti Md/q,Gd/q -c4: pinsrw Pq,Rd/q/Mw,Ib | pinsrw Vdq,Rd/q/Mw,Ib (66),(VEX),(o128) -c5: pextrw Gd,Nq,Ib | pextrw Gd,Udq,Ib (66),(VEX),(o128) -c6: shufps Vps,Wps,Ib (VEX) | shufpd Vpd,Wpd,Ib (66),(VEX) +c2: vcmpps Vps,Hps,Wps,Ib | vcmppd Vpd,Hpd,Wpd,Ib (66) | vcmpss Vss,Hss,Wss,Ib (F3),(v1) | vcmpsd Vsd,Hsd,Wsd,Ib (F2),(v1) +c3: movnti My,Gy +c4: pinsrw Pq,Ry/Mw,Ib | vpinsrw Vdq,Hdq,Ry/Mw,Ib (66),(v1) +c5: pextrw Gd,Nq,Ib | vpextrw Gd,Udq,Ib (66),(v1) +c6: vshufps Vps,Hps,Wps,Ib | vshufpd Vpd,Hpd,Wpd,Ib (66) c7: Grp9 (1A) c8: BSWAP RAX/EAX/R8/R8D c9: BSWAP RCX/ECX/R9/R9D @@ -524,55 +539,55 @@ cd: BSWAP RBP/EBP/R13/R13D ce: BSWAP RSI/ESI/R14/R14D cf: BSWAP RDI/EDI/R15/R15D # 0x0f 0xd0-0xdf -d0: addsubps Vps,Wps (F2),(VEX) | addsubpd Vpd,Wpd (66),(VEX) -d1: psrlw Pq,Qq | psrlw Vdq,Wdq (66),(VEX),(o128) -d2: psrld Pq,Qq | psrld Vdq,Wdq (66),(VEX),(o128) -d3: psrlq Pq,Qq | psrlq Vdq,Wdq (66),(VEX),(o128) -d4: paddq Pq,Qq | paddq Vdq,Wdq (66),(VEX),(o128) -d5: pmullw Pq,Qq | pmullw Vdq,Wdq (66),(VEX),(o128) -d6: movq Wq,Vq (66),(VEX),(o128) | movq2dq Vdq,Nq (F3) | movdq2q Pq,Uq (F2) -d7: pmovmskb Gd,Nq | pmovmskb Gd,Udq (66),(VEX),(o128) -d8: psubusb Pq,Qq | psubusb Vdq,Wdq (66),(VEX),(o128) -d9: psubusw Pq,Qq | psubusw Vdq,Wdq (66),(VEX),(o128) -da: pminub Pq,Qq | pminub Vdq,Wdq (66),(VEX),(o128) -db: pand Pq,Qq | pand Vdq,Wdq (66),(VEX),(o128) -dc: paddusb Pq,Qq | paddusb Vdq,Wdq (66),(VEX),(o128) -dd: paddusw Pq,Qq | paddusw Vdq,Wdq (66),(VEX),(o128) -de: pmaxub Pq,Qq | pmaxub Vdq,Wdq (66),(VEX),(o128) -df: pandn Pq,Qq | pandn Vdq,Wdq (66),(VEX),(o128) +d0: vaddsubpd Vpd,Hpd,Wpd (66) | vaddsubps Vps,Hps,Wps (F2) +d1: psrlw Pq,Qq | vpsrlw Vx,Hx,Wx (66),(v1) +d2: psrld Pq,Qq | vpsrld Vx,Hx,Wx (66),(v1) +d3: psrlq Pq,Qq | vpsrlq Vx,Hx,Wx (66),(v1) +d4: paddq Pq,Qq | vpaddq Vx,Hx,Wx (66),(v1) +d5: pmullw Pq,Qq | vpmullw Vx,Hx,Wx (66),(v1) +d6: vmovq Wq,Vq (66),(v1) | movq2dq Vdq,Nq (F3) | movdq2q Pq,Uq (F2) +d7: pmovmskb Gd,Nq | vpmovmskb Gd,Ux (66),(v1) +d8: psubusb Pq,Qq | vpsubusb Vx,Hx,Wx (66),(v1) +d9: psubusw Pq,Qq | vpsubusw Vx,Hx,Wx (66),(v1) +da: pminub Pq,Qq | vpminub Vx,Hx,Wx (66),(v1) +db: pand Pq,Qq | vpand Vx,Hx,Wx (66),(v1) +dc: paddusb Pq,Qq | vpaddusb Vx,Hx,Wx (66),(v1) +dd: paddusw Pq,Qq | vpaddusw Vx,Hx,Wx (66),(v1) +de: pmaxub Pq,Qq | vpmaxub Vx,Hx,Wx (66),(v1) +df: pandn Pq,Qq | vpandn Vx,Hx,Wx (66),(v1) # 0x0f 0xe0-0xef -e0: pavgb Pq,Qq | pavgb Vdq,Wdq (66),(VEX),(o128) -e1: psraw Pq,Qq | psraw Vdq,Wdq (66),(VEX),(o128) -e2: psrad Pq,Qq | psrad Vdq,Wdq (66),(VEX),(o128) -e3: pavgw Pq,Qq | pavgw Vdq,Wdq (66),(VEX),(o128) -e4: pmulhuw Pq,Qq | pmulhuw Vdq,Wdq (66),(VEX),(o128) -e5: pmulhw Pq,Qq | pmulhw Vdq,Wdq (66),(VEX),(o128) -e6: cvtpd2dq Vdq,Wpd (F2),(VEX) | cvttpd2dq Vdq,Wpd (66),(VEX) | cvtdq2pd Vpd,Wdq (F3),(VEX) -e7: movntq Mq,Pq | movntdq Mdq,Vdq (66),(VEX) -e8: psubsb Pq,Qq | psubsb Vdq,Wdq (66),(VEX),(o128) -e9: psubsw Pq,Qq | psubsw Vdq,Wdq (66),(VEX),(o128) -ea: pminsw Pq,Qq | pminsw Vdq,Wdq (66),(VEX),(o128) -eb: por Pq,Qq | por Vdq,Wdq (66),(VEX),(o128) -ec: paddsb Pq,Qq | paddsb Vdq,Wdq (66),(VEX),(o128) -ed: paddsw Pq,Qq | paddsw Vdq,Wdq (66),(VEX),(o128) -ee: pmaxsw Pq,Qq | pmaxsw Vdq,Wdq (66),(VEX),(o128) -ef: pxor Pq,Qq | pxor Vdq,Wdq (66),(VEX),(o128) +e0: pavgb Pq,Qq | vpavgb Vx,Hx,Wx (66),(v1) +e1: psraw Pq,Qq | vpsraw Vx,Hx,Wx (66),(v1) +e2: psrad Pq,Qq | vpsrad Vx,Hx,Wx (66),(v1) +e3: pavgw Pq,Qq | vpavgw Vx,Hx,Wx (66),(v1) +e4: pmulhuw Pq,Qq | vpmulhuw Vx,Hx,Wx (66),(v1) +e5: pmulhw Pq,Qq | vpmulhw Vx,Hx,Wx (66),(v1) +e6: vcvttpd2dq Vx,Wpd (66) | vcvtdq2pd Vx,Wdq (F3) | vcvtpd2dq Vx,Wpd (F2) +e7: movntq Mq,Pq | vmovntdq Mx,Vx (66) +e8: psubsb Pq,Qq | vpsubsb Vx,Hx,Wx (66),(v1) +e9: psubsw Pq,Qq | vpsubsw Vx,Hx,Wx (66),(v1) +ea: pminsw Pq,Qq | vpminsw Vx,Hx,Wx (66),(v1) +eb: por Pq,Qq | vpor Vx,Hx,Wx (66),(v1) +ec: paddsb Pq,Qq | vpaddsb Vx,Hx,Wx (66),(v1) +ed: paddsw Pq,Qq | vpaddsw Vx,Hx,Wx (66),(v1) +ee: pmaxsw Pq,Qq | vpmaxsw Vx,Hx,Wx (66),(v1) +ef: pxor Pq,Qq | vpxor Vx,Hx,Wx (66),(v1) # 0x0f 0xf0-0xff -f0: lddqu Vdq,Mdq (F2),(VEX) -f1: psllw Pq,Qq | psllw Vdq,Wdq (66),(VEX),(o128) -f2: pslld Pq,Qq | pslld Vdq,Wdq (66),(VEX),(o128) -f3: psllq Pq,Qq | psllq Vdq,Wdq (66),(VEX),(o128) -f4: pmuludq Pq,Qq | pmuludq Vdq,Wdq (66),(VEX),(o128) -f5: pmaddwd Pq,Qq | pmaddwd Vdq,Wdq (66),(VEX),(o128) -f6: psadbw Pq,Qq | psadbw Vdq,Wdq (66),(VEX),(o128) -f7: maskmovq Pq,Nq | maskmovdqu Vdq,Udq (66),(VEX),(o128) -f8: psubb Pq,Qq | psubb Vdq,Wdq (66),(VEX),(o128) -f9: psubw Pq,Qq | psubw Vdq,Wdq (66),(VEX),(o128) -fa: psubd Pq,Qq | psubd Vdq,Wdq (66),(VEX),(o128) -fb: psubq Pq,Qq | psubq Vdq,Wdq (66),(VEX),(o128) -fc: paddb Pq,Qq | paddb Vdq,Wdq (66),(VEX),(o128) -fd: paddw Pq,Qq | paddw Vdq,Wdq (66),(VEX),(o128) -fe: paddd Pq,Qq | paddd Vdq,Wdq (66),(VEX),(o128) +f0: vlddqu Vx,Mx (F2) +f1: psllw Pq,Qq | vpsllw Vx,Hx,Wx (66),(v1) +f2: pslld Pq,Qq | vpslld Vx,Hx,Wx (66),(v1) +f3: psllq Pq,Qq | vpsllq Vx,Hx,Wx (66),(v1) +f4: pmuludq Pq,Qq | vpmuludq Vx,Hx,Wx (66),(v1) +f5: pmaddwd Pq,Qq | vpmaddwd Vx,Hx,Wx (66),(v1) +f6: psadbw Pq,Qq | vpsadbw Vx,Hx,Wx (66),(v1) +f7: maskmovq Pq,Nq | vmaskmovdqu Vx,Ux (66),(v1) +f8: psubb Pq,Qq | vpsubb Vx,Hx,Wx (66),(v1) +f9: psubw Pq,Qq | vpsubw Vx,Hx,Wx (66),(v1) +fa: psubd Pq,Qq | vpsubd Vx,Hx,Wx (66),(v1) +fb: psubq Pq,Qq | vpsubq Vx,Hx,Wx (66),(v1) +fc: paddb Pq,Qq | vpaddb Vx,Hx,Wx (66),(v1) +fd: paddw Pq,Qq | vpaddw Vx,Hx,Wx (66),(v1) +fe: paddd Pq,Qq | vpaddd Vx,Hx,Wx (66),(v1) ff: EndTable @@ -580,155 +595,193 @@ Table: 3-byte opcode 1 (0x0f 0x38) Referrer: 3-byte escape 1 AVXcode: 2 # 0x0f 0x38 0x00-0x0f -00: pshufb Pq,Qq | pshufb Vdq,Wdq (66),(VEX),(o128) -01: phaddw Pq,Qq | phaddw Vdq,Wdq (66),(VEX),(o128) -02: phaddd Pq,Qq | phaddd Vdq,Wdq (66),(VEX),(o128) -03: phaddsw Pq,Qq | phaddsw Vdq,Wdq (66),(VEX),(o128) -04: pmaddubsw Pq,Qq | pmaddubsw Vdq,Wdq (66),(VEX),(o128) -05: phsubw Pq,Qq | phsubw Vdq,Wdq (66),(VEX),(o128) -06: phsubd Pq,Qq | phsubd Vdq,Wdq (66),(VEX),(o128) -07: phsubsw Pq,Qq | phsubsw Vdq,Wdq (66),(VEX),(o128) -08: psignb Pq,Qq | psignb Vdq,Wdq (66),(VEX),(o128) -09: psignw Pq,Qq | psignw Vdq,Wdq (66),(VEX),(o128) -0a: psignd Pq,Qq | psignd Vdq,Wdq (66),(VEX),(o128) -0b: pmulhrsw Pq,Qq | pmulhrsw Vdq,Wdq (66),(VEX),(o128) -0c: Vpermilps /r (66),(oVEX) -0d: Vpermilpd /r (66),(oVEX) -0e: vtestps /r (66),(oVEX) -0f: vtestpd /r (66),(oVEX) +00: pshufb Pq,Qq | vpshufb Vx,Hx,Wx (66),(v1) +01: phaddw Pq,Qq | vphaddw Vx,Hx,Wx (66),(v1) +02: phaddd Pq,Qq | vphaddd Vx,Hx,Wx (66),(v1) +03: phaddsw Pq,Qq | vphaddsw Vx,Hx,Wx (66),(v1) +04: pmaddubsw Pq,Qq | vpmaddubsw Vx,Hx,Wx (66),(v1) +05: phsubw Pq,Qq | vphsubw Vx,Hx,Wx (66),(v1) +06: phsubd Pq,Qq | vphsubd Vx,Hx,Wx (66),(v1) +07: phsubsw Pq,Qq | vphsubsw Vx,Hx,Wx (66),(v1) +08: psignb Pq,Qq | vpsignb Vx,Hx,Wx (66),(v1) +09: psignw Pq,Qq | vpsignw Vx,Hx,Wx (66),(v1) +0a: psignd Pq,Qq | vpsignd Vx,Hx,Wx (66),(v1) +0b: pmulhrsw Pq,Qq | vpmulhrsw Vx,Hx,Wx (66),(v1) +0c: vpermilps Vx,Hx,Wx (66),(v) +0d: vpermilpd Vx,Hx,Wx (66),(v) +0e: vtestps Vx,Wx (66),(v) +0f: vtestpd Vx,Wx (66),(v) # 0x0f 0x38 0x10-0x1f 10: pblendvb Vdq,Wdq (66) 11: 12: -13: +13: vcvtph2ps Vx,Wx,Ib (66),(v) 14: blendvps Vdq,Wdq (66) 15: blendvpd Vdq,Wdq (66) -16: -17: ptest Vdq,Wdq (66),(VEX) -18: vbroadcastss /r (66),(oVEX) -19: vbroadcastsd /r (66),(oVEX),(o256) -1a: vbroadcastf128 /r (66),(oVEX),(o256) +16: vpermps Vqq,Hqq,Wqq (66),(v) +17: vptest Vx,Wx (66) +18: vbroadcastss Vx,Wd (66),(v) +19: vbroadcastsd Vqq,Wq (66),(v) +1a: vbroadcastf128 Vqq,Mdq (66),(v) 1b: -1c: pabsb Pq,Qq | pabsb Vdq,Wdq (66),(VEX),(o128) -1d: pabsw Pq,Qq | pabsw Vdq,Wdq (66),(VEX),(o128) -1e: pabsd Pq,Qq | pabsd Vdq,Wdq (66),(VEX),(o128) +1c: pabsb Pq,Qq | vpabsb Vx,Wx (66),(v1) +1d: pabsw Pq,Qq | vpabsw Vx,Wx (66),(v1) +1e: pabsd Pq,Qq | vpabsd Vx,Wx (66),(v1) 1f: # 0x0f 0x38 0x20-0x2f -20: pmovsxbw Vdq,Udq/Mq (66),(VEX),(o128) -21: pmovsxbd Vdq,Udq/Md (66),(VEX),(o128) -22: pmovsxbq Vdq,Udq/Mw (66),(VEX),(o128) -23: pmovsxwd Vdq,Udq/Mq (66),(VEX),(o128) -24: pmovsxwq Vdq,Udq/Md (66),(VEX),(o128) -25: pmovsxdq Vdq,Udq/Mq (66),(VEX),(o128) +20: vpmovsxbw Vx,Ux/Mq (66),(v1) +21: vpmovsxbd Vx,Ux/Md (66),(v1) +22: vpmovsxbq Vx,Ux/Mw (66),(v1) +23: vpmovsxwd Vx,Ux/Mq (66),(v1) +24: vpmovsxwq Vx,Ux/Md (66),(v1) +25: vpmovsxdq Vx,Ux/Mq (66),(v1) 26: 27: -28: pmuldq Vdq,Wdq (66),(VEX),(o128) -29: pcmpeqq Vdq,Wdq (66),(VEX),(o128) -2a: movntdqa Vdq,Mdq (66),(VEX),(o128) -2b: packusdw Vdq,Wdq (66),(VEX),(o128) -2c: vmaskmovps(ld) /r (66),(oVEX) -2d: vmaskmovpd(ld) /r (66),(oVEX) -2e: vmaskmovps(st) /r (66),(oVEX) -2f: vmaskmovpd(st) /r (66),(oVEX) +28: vpmuldq Vx,Hx,Wx (66),(v1) +29: vpcmpeqq Vx,Hx,Wx (66),(v1) +2a: vmovntdqa Vx,Mx (66),(v1) +2b: vpackusdw Vx,Hx,Wx (66),(v1) +2c: vmaskmovps Vx,Hx,Mx (66),(v) +2d: vmaskmovpd Vx,Hx,Mx (66),(v) +2e: vmaskmovps Mx,Hx,Vx (66),(v) +2f: vmaskmovpd Mx,Hx,Vx (66),(v) # 0x0f 0x38 0x30-0x3f -30: pmovzxbw Vdq,Udq/Mq (66),(VEX),(o128) -31: pmovzxbd Vdq,Udq/Md (66),(VEX),(o128) -32: pmovzxbq Vdq,Udq/Mw (66),(VEX),(o128) -33: pmovzxwd Vdq,Udq/Mq (66),(VEX),(o128) -34: pmovzxwq Vdq,Udq/Md (66),(VEX),(o128) -35: pmovzxdq Vdq,Udq/Mq (66),(VEX),(o128) -36: -37: pcmpgtq Vdq,Wdq (66),(VEX),(o128) -38: pminsb Vdq,Wdq (66),(VEX),(o128) -39: pminsd Vdq,Wdq (66),(VEX),(o128) -3a: pminuw Vdq,Wdq (66),(VEX),(o128) -3b: pminud Vdq,Wdq (66),(VEX),(o128) -3c: pmaxsb Vdq,Wdq (66),(VEX),(o128) -3d: pmaxsd Vdq,Wdq (66),(VEX),(o128) -3e: pmaxuw Vdq,Wdq (66),(VEX),(o128) -3f: pmaxud Vdq,Wdq (66),(VEX),(o128) +30: vpmovzxbw Vx,Ux/Mq (66),(v1) +31: vpmovzxbd Vx,Ux/Md (66),(v1) +32: vpmovzxbq Vx,Ux/Mw (66),(v1) +33: vpmovzxwd Vx,Ux/Mq (66),(v1) +34: vpmovzxwq Vx,Ux/Md (66),(v1) +35: vpmovzxdq Vx,Ux/Mq (66),(v1) +36: vpermd Vqq,Hqq,Wqq (66),(v) +37: vpcmpgtq Vx,Hx,Wx (66),(v1) +38: vpminsb Vx,Hx,Wx (66),(v1) +39: vpminsd Vx,Hx,Wx (66),(v1) +3a: vpminuw Vx,Hx,Wx (66),(v1) +3b: vpminud Vx,Hx,Wx (66),(v1) +3c: vpmaxsb Vx,Hx,Wx (66),(v1) +3d: vpmaxsd Vx,Hx,Wx (66),(v1) +3e: vpmaxuw Vx,Hx,Wx (66),(v1) +3f: vpmaxud Vx,Hx,Wx (66),(v1) # 0x0f 0x38 0x40-0x8f -40: pmulld Vdq,Wdq (66),(VEX),(o128) -41: phminposuw Vdq,Wdq (66),(VEX),(o128) -80: INVEPT Gd/q,Mdq (66) -81: INVPID Gd/q,Mdq (66) +40: vpmulld Vx,Hx,Wx (66),(v1) +41: vphminposuw Vdq,Wdq (66),(v1) +42: +43: +44: +45: vpsrlvd/q Vx,Hx,Wx (66),(v) +46: vpsravd Vx,Hx,Wx (66),(v) +47: vpsllvd/q Vx,Hx,Wx (66),(v) +# Skip 0x48-0x57 +58: vpbroadcastd Vx,Wx (66),(v) +59: vpbroadcastq Vx,Wx (66),(v) +5a: vbroadcasti128 Vqq,Mdq (66),(v) +# Skip 0x5b-0x77 +78: vpbroadcastb Vx,Wx (66),(v) +79: vpbroadcastw Vx,Wx (66),(v) +# Skip 0x7a-0x7f +80: INVEPT Gy,Mdq (66) +81: INVPID Gy,Mdq (66) +82: INVPCID Gy,Mdq (66) +8c: vpmaskmovd/q Vx,Hx,Mx (66),(v) +8e: vpmaskmovd/q Mx,Vx,Hx (66),(v) # 0x0f 0x38 0x90-0xbf (FMA) -96: vfmaddsub132pd/ps /r (66),(VEX) -97: vfmsubadd132pd/ps /r (66),(VEX) -98: vfmadd132pd/ps /r (66),(VEX) -99: vfmadd132sd/ss /r (66),(VEX),(o128) -9a: vfmsub132pd/ps /r (66),(VEX) -9b: vfmsub132sd/ss /r (66),(VEX),(o128) -9c: vfnmadd132pd/ps /r (66),(VEX) -9d: vfnmadd132sd/ss /r (66),(VEX),(o128) -9e: vfnmsub132pd/ps /r (66),(VEX) -9f: vfnmsub132sd/ss /r (66),(VEX),(o128) -a6: vfmaddsub213pd/ps /r (66),(VEX) -a7: vfmsubadd213pd/ps /r (66),(VEX) -a8: vfmadd213pd/ps /r (66),(VEX) -a9: vfmadd213sd/ss /r (66),(VEX),(o128) -aa: vfmsub213pd/ps /r (66),(VEX) -ab: vfmsub213sd/ss /r (66),(VEX),(o128) -ac: vfnmadd213pd/ps /r (66),(VEX) -ad: vfnmadd213sd/ss /r (66),(VEX),(o128) -ae: vfnmsub213pd/ps /r (66),(VEX) -af: vfnmsub213sd/ss /r (66),(VEX),(o128) -b6: vfmaddsub231pd/ps /r (66),(VEX) -b7: vfmsubadd231pd/ps /r (66),(VEX) -b8: vfmadd231pd/ps /r (66),(VEX) -b9: vfmadd231sd/ss /r (66),(VEX),(o128) -ba: vfmsub231pd/ps /r (66),(VEX) -bb: vfmsub231sd/ss /r (66),(VEX),(o128) -bc: vfnmadd231pd/ps /r (66),(VEX) -bd: vfnmadd231sd/ss /r (66),(VEX),(o128) -be: vfnmsub231pd/ps /r (66),(VEX) -bf: vfnmsub231sd/ss /r (66),(VEX),(o128) +90: vgatherdd/q Vx,Hx,Wx (66),(v) +91: vgatherqd/q Vx,Hx,Wx (66),(v) +92: vgatherdps/d Vx,Hx,Wx (66),(v) +93: vgatherqps/d Vx,Hx,Wx (66),(v) +94: +95: +96: vfmaddsub132ps/d Vx,Hx,Wx (66),(v) +97: vfmsubadd132ps/d Vx,Hx,Wx (66),(v) +98: vfmadd132ps/d Vx,Hx,Wx (66),(v) +99: vfmadd132ss/d Vx,Hx,Wx (66),(v),(v1) +9a: vfmsub132ps/d Vx,Hx,Wx (66),(v) +9b: vfmsub132ss/d Vx,Hx,Wx (66),(v),(v1) +9c: vfnmadd132ps/d Vx,Hx,Wx (66),(v) +9d: vfnmadd132ss/d Vx,Hx,Wx (66),(v),(v1) +9e: vfnmsub132ps/d Vx,Hx,Wx (66),(v) +9f: vfnmsub132ss/d Vx,Hx,Wx (66),(v),(v1) +a6: vfmaddsub213ps/d Vx,Hx,Wx (66),(v) +a7: vfmsubadd213ps/d Vx,Hx,Wx (66),(v) +a8: vfmadd213ps/d Vx,Hx,Wx (66),(v) +a9: vfmadd213ss/d Vx,Hx,Wx (66),(v),(v1) +aa: vfmsub213ps/d Vx,Hx,Wx (66),(v) +ab: vfmsub213ss/d Vx,Hx,Wx (66),(v),(v1) +ac: vfnmadd213ps/d Vx,Hx,Wx (66),(v) +ad: vfnmadd213ss/d Vx,Hx,Wx (66),(v),(v1) +ae: vfnmsub213ps/d Vx,Hx,Wx (66),(v) +af: vfnmsub213ss/d Vx,Hx,Wx (66),(v),(v1) +b6: vfmaddsub231ps/d Vx,Hx,Wx (66),(v) +b7: vfmsubadd231ps/d Vx,Hx,Wx (66),(v) +b8: vfmadd231ps/d Vx,Hx,Wx (66),(v) +b9: vfmadd231ss/d Vx,Hx,Wx (66),(v),(v1) +ba: vfmsub231ps/d Vx,Hx,Wx (66),(v) +bb: vfmsub231ss/d Vx,Hx,Wx (66),(v),(v1) +bc: vfnmadd231ps/d Vx,Hx,Wx (66),(v) +bd: vfnmadd231ss/d Vx,Hx,Wx (66),(v),(v1) +be: vfnmsub231ps/d Vx,Hx,Wx (66),(v) +bf: vfnmsub231ss/d Vx,Hx,Wx (66),(v),(v1) # 0x0f 0x38 0xc0-0xff -db: aesimc Vdq,Wdq (66),(VEX),(o128) -dc: aesenc Vdq,Wdq (66),(VEX),(o128) -dd: aesenclast Vdq,Wdq (66),(VEX),(o128) -de: aesdec Vdq,Wdq (66),(VEX),(o128) -df: aesdeclast Vdq,Wdq (66),(VEX),(o128) -f0: MOVBE Gv,Mv | CRC32 Gd,Eb (F2) -f1: MOVBE Mv,Gv | CRC32 Gd,Ev (F2) +db: VAESIMC Vdq,Wdq (66),(v1) +dc: VAESENC Vdq,Hdq,Wdq (66),(v1) +dd: VAESENCLAST Vdq,Hdq,Wdq (66),(v1) +de: VAESDEC Vdq,Hdq,Wdq (66),(v1) +df: VAESDECLAST Vdq,Hdq,Wdq (66),(v1) +f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) +f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) +f3: ANDN Gy,By,Ey (v) +f4: Grp17 (1A) +f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) +f6: MULX By,Gy,rDX,Ey (F2),(v) +f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) EndTable Table: 3-byte opcode 2 (0x0f 0x3a) Referrer: 3-byte escape 2 AVXcode: 3 # 0x0f 0x3a 0x00-0xff -04: vpermilps /r,Ib (66),(oVEX) -05: vpermilpd /r,Ib (66),(oVEX) -06: vperm2f128 /r,Ib (66),(oVEX),(o256) -08: roundps Vdq,Wdq,Ib (66),(VEX) -09: roundpd Vdq,Wdq,Ib (66),(VEX) -0a: roundss Vss,Wss,Ib (66),(VEX),(o128) -0b: roundsd Vsd,Wsd,Ib (66),(VEX),(o128) -0c: blendps Vdq,Wdq,Ib (66),(VEX) -0d: blendpd Vdq,Wdq,Ib (66),(VEX) -0e: pblendw Vdq,Wdq,Ib (66),(VEX),(o128) -0f: palignr Pq,Qq,Ib | palignr Vdq,Wdq,Ib (66),(VEX),(o128) -14: pextrb Rd/Mb,Vdq,Ib (66),(VEX),(o128) -15: pextrw Rd/Mw,Vdq,Ib (66),(VEX),(o128) -16: pextrd/pextrq Ed/q,Vdq,Ib (66),(VEX),(o128) -17: extractps Ed,Vdq,Ib (66),(VEX),(o128) -18: vinsertf128 /r,Ib (66),(oVEX),(o256) -19: vextractf128 /r,Ib (66),(oVEX),(o256) -20: pinsrb Vdq,Rd/q/Mb,Ib (66),(VEX),(o128) -21: insertps Vdq,Udq/Md,Ib (66),(VEX),(o128) -22: pinsrd/pinsrq Vdq,Ed/q,Ib (66),(VEX),(o128) -40: dpps Vdq,Wdq,Ib (66),(VEX) -41: dppd Vdq,Wdq,Ib (66),(VEX),(o128) -42: mpsadbw Vdq,Wdq,Ib (66),(VEX),(o128) -44: pclmulq Vdq,Wdq,Ib (66),(VEX),(o128) -4a: vblendvps /r,Ib (66),(oVEX) -4b: vblendvpd /r,Ib (66),(oVEX) -4c: vpblendvb /r,Ib (66),(oVEX),(o128) -60: pcmpestrm Vdq,Wdq,Ib (66),(VEX),(o128) -61: pcmpestri Vdq,Wdq,Ib (66),(VEX),(o128) -62: pcmpistrm Vdq,Wdq,Ib (66),(VEX),(o128) -63: pcmpistri Vdq,Wdq,Ib (66),(VEX),(o128) -df: aeskeygenassist Vdq,Wdq,Ib (66),(VEX),(o128) +00: vpermq Vqq,Wqq,Ib (66),(v) +01: vpermpd Vqq,Wqq,Ib (66),(v) +02: vpblendd Vx,Hx,Wx,Ib (66),(v) +03: +04: vpermilps Vx,Wx,Ib (66),(v) +05: vpermilpd Vx,Wx,Ib (66),(v) +06: vperm2f128 Vqq,Hqq,Wqq,Ib (66),(v) +07: +08: vroundps Vx,Wx,Ib (66) +09: vroundpd Vx,Wx,Ib (66) +0a: vroundss Vss,Wss,Ib (66),(v1) +0b: vroundsd Vsd,Wsd,Ib (66),(v1) +0c: vblendps Vx,Hx,Wx,Ib (66) +0d: vblendpd Vx,Hx,Wx,Ib (66) +0e: vpblendw Vx,Hx,Wx,Ib (66),(v1) +0f: palignr Pq,Qq,Ib | vpalignr Vx,Hx,Wx,Ib (66),(v1) +14: vpextrb Rd/Mb,Vdq,Ib (66),(v1) +15: vpextrw Rd/Mw,Vdq,Ib (66),(v1) +16: vpextrd/q Ey,Vdq,Ib (66),(v1) +17: vextractps Ed,Vdq,Ib (66),(v1) +18: vinsertf128 Vqq,Hqq,Wqq,Ib (66),(v) +19: vextractf128 Wdq,Vqq,Ib (66),(v) +1d: vcvtps2ph Wx,Vx,Ib (66),(v) +20: vpinsrb Vdq,Hdq,Ry/Mb,Ib (66),(v1) +21: vinsertps Vdq,Hdq,Udq/Md,Ib (66),(v1) +22: vpinsrd/q Vdq,Hdq,Ey,Ib (66),(v1) +38: vinserti128 Vqq,Hqq,Wqq,Ib (66),(v) +39: vextracti128 Wdq,Vqq,Ib (66),(v) +40: vdpps Vx,Hx,Wx,Ib (66) +41: vdppd Vdq,Hdq,Wdq,Ib (66),(v1) +42: vmpsadbw Vx,Hx,Wx,Ib (66),(v1) +44: vpclmulqdq Vdq,Hdq,Wdq,Ib (66),(v1) +46: vperm2i128 Vqq,Hqq,Wqq,Ib (66),(v) +4a: vblendvps Vx,Hx,Wx,Lx (66),(v) +4b: vblendvpd Vx,Hx,Wx,Lx (66),(v) +4c: vpblendvb Vx,Hx,Wx,Lx (66),(v1) +60: vpcmpestrm Vdq,Wdq,Ib (66),(v1) +61: vpcmpestri Vdq,Wdq,Ib (66),(v1) +62: vpcmpistrm Vdq,Wdq,Ib (66),(v1) +63: vpcmpistri Vdq,Wdq,Ib (66),(v1) +df: VAESKEYGEN Vdq,Wdq,Ib (66),(v1) +f0: RORX Gy,Ey,Ib (F2),(v) EndTable GrpTable: Grp1 @@ -790,7 +843,7 @@ GrpTable: Grp5 2: CALLN Ev (f64) 3: CALLF Ep 4: JMPN Ev (f64) -5: JMPF Ep +5: JMPF Mp 6: PUSH Ev (d64) 7: EndTable @@ -807,7 +860,7 @@ EndTable GrpTable: Grp7 0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) 1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001) -2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) +2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) 3: LIDT Ms 4: SMSW Mw/Rv 5: @@ -824,44 +877,45 @@ EndTable GrpTable: Grp9 1: CMPXCHG8B/16B Mq/Mdq -6: VMPTRLD Mq | VMCLEAR Mq (66) | VMXON Mq (F3) -7: VMPTRST Mq +6: VMPTRLD Mq | VMCLEAR Mq (66) | VMXON Mq (F3) | RDRAND Rv (11B) +7: VMPTRST Mq | VMPTRST Mq (F3) EndTable GrpTable: Grp10 EndTable GrpTable: Grp11 +# Note: the operands are given by group opcode 0: MOV EndTable GrpTable: Grp12 -2: psrlw Nq,Ib (11B) | psrlw Udq,Ib (66),(11B),(VEX),(o128) -4: psraw Nq,Ib (11B) | psraw Udq,Ib (66),(11B),(VEX),(o128) -6: psllw Nq,Ib (11B) | psllw Udq,Ib (66),(11B),(VEX),(o128) +2: psrlw Nq,Ib (11B) | vpsrlw Hx,Ux,Ib (66),(11B),(v1) +4: psraw Nq,Ib (11B) | vpsraw Hx,Ux,Ib (66),(11B),(v1) +6: psllw Nq,Ib (11B) | vpsllw Hx,Ux,Ib (66),(11B),(v1) EndTable GrpTable: Grp13 -2: psrld Nq,Ib (11B) | psrld Udq,Ib (66),(11B),(VEX),(o128) -4: psrad Nq,Ib (11B) | psrad Udq,Ib (66),(11B),(VEX),(o128) -6: pslld Nq,Ib (11B) | pslld Udq,Ib (66),(11B),(VEX),(o128) +2: psrld Nq,Ib (11B) | vpsrld Hx,Ux,Ib (66),(11B),(v1) +4: psrad Nq,Ib (11B) | vpsrad Hx,Ux,Ib (66),(11B),(v1) +6: pslld Nq,Ib (11B) | vpslld Hx,Ux,Ib (66),(11B),(v1) EndTable GrpTable: Grp14 -2: psrlq Nq,Ib (11B) | psrlq Udq,Ib (66),(11B),(VEX),(o128) -3: psrldq Udq,Ib (66),(11B),(VEX),(o128) -6: psllq Nq,Ib (11B) | psllq Udq,Ib (66),(11B),(VEX),(o128) -7: pslldq Udq,Ib (66),(11B),(VEX),(o128) +2: psrlq Nq,Ib (11B) | vpsrlq Hx,Ux,Ib (66),(11B),(v1) +3: vpsrldq Hx,Ux,Ib (66),(11B),(v1) +6: psllq Nq,Ib (11B) | vpsllq Hx,Ux,Ib (66),(11B),(v1) +7: vpslldq Hx,Ux,Ib (66),(11B),(v1) EndTable GrpTable: Grp15 -0: fxsave -1: fxstor -2: ldmxcsr (VEX) -3: stmxcsr (VEX) +0: fxsave | RDFSBASE Ry (F3),(11B) +1: fxstor | RDGSBASE Ry (F3),(11B) +2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B) +3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B) 4: XSAVE 5: XRSTOR | lfence (11B) -6: mfence (11B) +6: XSAVEOPT | mfence (11B) 7: clflush | sfence (11B) EndTable @@ -872,6 +926,12 @@ GrpTable: Grp16 3: prefetch T2 EndTable +GrpTable: Grp17 +1: BLSR By,Ey (v) +2: BLSMSK By,Ey (v) +3: BLSI By,Ey (v) +EndTable + # AMD's Prefetch Group GrpTable: GrpP 0: PREFETCH diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile index 3d11327c9ab4..23d8e5fecf76 100644 --- a/arch/x86/mm/Makefile +++ b/arch/x86/mm/Makefile @@ -27,6 +27,4 @@ obj-$(CONFIG_AMD_NUMA) += amdtopology.o obj-$(CONFIG_ACPI_NUMA) += srat.o obj-$(CONFIG_NUMA_EMU) += numa_emulation.o -obj-$(CONFIG_HAVE_MEMBLOCK) += memblock.o - obj-$(CONFIG_MEMTEST) += memtest.o diff --git a/arch/x86/mm/extable.c b/arch/x86/mm/extable.c index d0474ad2a6e5..1fb85dbe390a 100644 --- a/arch/x86/mm/extable.c +++ b/arch/x86/mm/extable.c @@ -25,7 +25,7 @@ int fixup_exception(struct pt_regs *regs) if (fixup) { /* If fixup is less than 16, it means uaccess error */ if (fixup->fixup < 16) { - current_thread_info()->uaccess_err = -EFAULT; + current_thread_info()->uaccess_err = 1; regs->ip += fixup->fixup; return 1; } diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 5db0490deb07..9d74824a708d 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -626,7 +626,7 @@ pgtable_bad(struct pt_regs *regs, unsigned long error_code, static noinline void no_context(struct pt_regs *regs, unsigned long error_code, - unsigned long address) + unsigned long address, int signal, int si_code) { struct task_struct *tsk = current; unsigned long *stackend; @@ -634,8 +634,17 @@ no_context(struct pt_regs *regs, unsigned long error_code, int sig; /* Are we prepared to handle this kernel fault? */ - if (fixup_exception(regs)) + if (fixup_exception(regs)) { + if (current_thread_info()->sig_on_uaccess_error && signal) { + tsk->thread.trap_no = 14; + tsk->thread.error_code = error_code | PF_USER; + tsk->thread.cr2 = address; + + /* XXX: hwpoison faults will set the wrong code. */ + force_sig_info_fault(signal, si_code, address, tsk, 0); + } return; + } /* * 32-bit: @@ -755,7 +764,7 @@ __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code, if (is_f00f_bug(regs, address)) return; - no_context(regs, error_code, address); + no_context(regs, error_code, address, SIGSEGV, si_code); } static noinline void @@ -819,7 +828,7 @@ do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address, /* Kernel mode? Handle exceptions or die: */ if (!(error_code & PF_USER)) { - no_context(regs, error_code, address); + no_context(regs, error_code, address, SIGBUS, BUS_ADRERR); return; } @@ -854,7 +863,7 @@ mm_fault_error(struct pt_regs *regs, unsigned long error_code, if (!(fault & VM_FAULT_RETRY)) up_read(¤t->mm->mmap_sem); if (!(error_code & PF_USER)) - no_context(regs, error_code, address); + no_context(regs, error_code, address, 0, 0); return 1; } if (!(fault & VM_FAULT_ERROR)) @@ -864,7 +873,8 @@ mm_fault_error(struct pt_regs *regs, unsigned long error_code, /* Kernel mode? Handle exceptions or die: */ if (!(error_code & PF_USER)) { up_read(¤t->mm->mmap_sem); - no_context(regs, error_code, address); + no_context(regs, error_code, address, + SIGSEGV, SEGV_MAPERR); return 1; } diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c index ea305856151c..dd74e46828c0 100644 --- a/arch/x86/mm/gup.c +++ b/arch/x86/mm/gup.c @@ -201,6 +201,8 @@ static noinline int gup_huge_pud(pud_t pud, unsigned long addr, do { VM_BUG_ON(compound_head(page) != head); pages[*nr] = page; + if (PageTail(page)) + get_huge_page_tail(page); (*nr)++; page++; refs++; diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c index b49962662101..f4f29b19fac5 100644 --- a/arch/x86/mm/highmem_32.c +++ b/arch/x86/mm/highmem_32.c @@ -45,6 +45,7 @@ void *kmap_atomic_prot(struct page *page, pgprot_t prot) vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); BUG_ON(!pte_none(*(kmap_pte-idx))); set_pte(kmap_pte-idx, mk_pte(page, prot)); + arch_flush_lazy_mmu_mode(); return (void *)vaddr; } @@ -88,6 +89,7 @@ void __kunmap_atomic(void *kvaddr) */ kpte_clear_flush(kmap_pte-idx, vaddr); kmap_atomic_idx_pop(); + arch_flush_lazy_mmu_mode(); } #ifdef CONFIG_DEBUG_HIGHMEM else { diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index 87488b93a65c..a298914058f9 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -67,7 +67,7 @@ static void __init find_early_table_space(unsigned long end, int use_pse, good_end = max_pfn_mapped << PAGE_SHIFT; base = memblock_find_in_range(start, good_end, tables, PAGE_SIZE); - if (base == MEMBLOCK_ERROR) + if (!base) panic("Cannot find space for the kernel page tables"); pgt_buf_start = base >> PAGE_SHIFT; @@ -80,7 +80,7 @@ static void __init find_early_table_space(unsigned long end, int use_pse, void __init native_pagetable_reserve(u64 start, u64 end) { - memblock_x86_reserve_range(start, end, "PGTABLE"); + memblock_reserve(start, end - start); } struct map_range { @@ -279,8 +279,8 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, * pgt_buf_end) and free the other ones (pgt_buf_end - pgt_buf_top) * so that they can be reused for other purposes. * - * On native it just means calling memblock_x86_reserve_range, on Xen it - * also means marking RW the pagetable pages that we allocated before + * On native it just means calling memblock_reserve, on Xen it also + * means marking RW the pagetable pages that we allocated before * but that haven't been used. * * In fact on xen we mark RO the whole range pgt_buf_start - diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index 29f7c6d98179..0c1da394a634 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -427,23 +427,17 @@ static void __init add_one_highpage_init(struct page *page) void __init add_highpages_with_active_regions(int nid, unsigned long start_pfn, unsigned long end_pfn) { - struct range *range; - int nr_range; - int i; - - nr_range = __get_free_all_memory_range(&range, nid, start_pfn, end_pfn); - - for (i = 0; i < nr_range; i++) { - struct page *page; - int node_pfn; - - for (node_pfn = range[i].start; node_pfn < range[i].end; - node_pfn++) { - if (!pfn_valid(node_pfn)) - continue; - page = pfn_to_page(node_pfn); - add_one_highpage_init(page); - } + phys_addr_t start, end; + u64 i; + + for_each_free_mem_range(i, nid, &start, &end, NULL) { + unsigned long pfn = clamp_t(unsigned long, PFN_UP(start), + start_pfn, end_pfn); + unsigned long e_pfn = clamp_t(unsigned long, PFN_DOWN(end), + start_pfn, end_pfn); + for ( ; pfn < e_pfn; pfn++) + if (pfn_valid(pfn)) + add_one_highpage_init(pfn_to_page(pfn)); } } #else @@ -650,18 +644,18 @@ void __init initmem_init(void) highstart_pfn = highend_pfn = max_pfn; if (max_pfn > max_low_pfn) highstart_pfn = max_low_pfn; - memblock_x86_register_active_regions(0, 0, highend_pfn); - sparse_memory_present_with_active_regions(0); printk(KERN_NOTICE "%ldMB HIGHMEM available.\n", pages_to_mb(highend_pfn - highstart_pfn)); num_physpages = highend_pfn; high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1; #else - memblock_x86_register_active_regions(0, 0, max_low_pfn); - sparse_memory_present_with_active_regions(0); num_physpages = max_low_pfn; high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1; #endif + + memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0); + sparse_memory_present_with_active_regions(0); + #ifdef CONFIG_FLATMEM max_mapnr = num_physpages; #endif diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index bbaaa005bf0e..a8a56ce3a962 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -608,7 +608,7 @@ kernel_physical_mapping_init(unsigned long start, #ifndef CONFIG_NUMA void __init initmem_init(void) { - memblock_x86_register_active_regions(0, 0, max_pfn); + memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0); } #endif diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c deleted file mode 100644 index 992da5ec5a64..000000000000 --- a/arch/x86/mm/memblock.c +++ /dev/null @@ -1,348 +0,0 @@ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/bitops.h> -#include <linux/memblock.h> -#include <linux/bootmem.h> -#include <linux/mm.h> -#include <linux/range.h> - -/* Check for already reserved areas */ -bool __init memblock_x86_check_reserved_size(u64 *addrp, u64 *sizep, u64 align) -{ - struct memblock_region *r; - u64 addr = *addrp, last; - u64 size = *sizep; - bool changed = false; - -again: - last = addr + size; - for_each_memblock(reserved, r) { - if (last > r->base && addr < r->base) { - size = r->base - addr; - changed = true; - goto again; - } - if (last > (r->base + r->size) && addr < (r->base + r->size)) { - addr = round_up(r->base + r->size, align); - size = last - addr; - changed = true; - goto again; - } - if (last <= (r->base + r->size) && addr >= r->base) { - *sizep = 0; - return false; - } - } - if (changed) { - *addrp = addr; - *sizep = size; - } - return changed; -} - -/* - * Find next free range after start, and size is returned in *sizep - */ -u64 __init memblock_x86_find_in_range_size(u64 start, u64 *sizep, u64 align) -{ - struct memblock_region *r; - - for_each_memblock(memory, r) { - u64 ei_start = r->base; - u64 ei_last = ei_start + r->size; - u64 addr; - - addr = round_up(ei_start, align); - if (addr < start) - addr = round_up(start, align); - if (addr >= ei_last) - continue; - *sizep = ei_last - addr; - while (memblock_x86_check_reserved_size(&addr, sizep, align)) - ; - - if (*sizep) - return addr; - } - - return MEMBLOCK_ERROR; -} - -static __init struct range *find_range_array(int count) -{ - u64 end, size, mem; - struct range *range; - - size = sizeof(struct range) * count; - end = memblock.current_limit; - - mem = memblock_find_in_range(0, end, size, sizeof(struct range)); - if (mem == MEMBLOCK_ERROR) - panic("can not find more space for range array"); - - /* - * This range is tempoaray, so don't reserve it, it will not be - * overlapped because We will not alloccate new buffer before - * We discard this one - */ - range = __va(mem); - memset(range, 0, size); - - return range; -} - -static void __init memblock_x86_subtract_reserved(struct range *range, int az) -{ - u64 final_start, final_end; - struct memblock_region *r; - - /* Take out region array itself at first*/ - memblock_free_reserved_regions(); - - memblock_dbg("Subtract (%ld early reservations)\n", memblock.reserved.cnt); - - for_each_memblock(reserved, r) { - memblock_dbg(" [%010llx-%010llx]\n", (u64)r->base, (u64)r->base + r->size - 1); - final_start = PFN_DOWN(r->base); - final_end = PFN_UP(r->base + r->size); - if (final_start >= final_end) - continue; - subtract_range(range, az, final_start, final_end); - } - - /* Put region array back ? */ - memblock_reserve_reserved_regions(); -} - -struct count_data { - int nr; -}; - -static int __init count_work_fn(unsigned long start_pfn, - unsigned long end_pfn, void *datax) -{ - struct count_data *data = datax; - - data->nr++; - - return 0; -} - -static int __init count_early_node_map(int nodeid) -{ - struct count_data data; - - data.nr = 0; - work_with_active_regions(nodeid, count_work_fn, &data); - - return data.nr; -} - -int __init __get_free_all_memory_range(struct range **rangep, int nodeid, - unsigned long start_pfn, unsigned long end_pfn) -{ - int count; - struct range *range; - int nr_range; - - count = (memblock.reserved.cnt + count_early_node_map(nodeid)) * 2; - - range = find_range_array(count); - nr_range = 0; - - /* - * Use early_node_map[] and memblock.reserved.region to get range array - * at first - */ - nr_range = add_from_early_node_map(range, count, nr_range, nodeid); - subtract_range(range, count, 0, start_pfn); - subtract_range(range, count, end_pfn, -1ULL); - - memblock_x86_subtract_reserved(range, count); - nr_range = clean_sort_range(range, count); - - *rangep = range; - return nr_range; -} - -int __init get_free_all_memory_range(struct range **rangep, int nodeid) -{ - unsigned long end_pfn = -1UL; - -#ifdef CONFIG_X86_32 - end_pfn = max_low_pfn; -#endif - return __get_free_all_memory_range(rangep, nodeid, 0, end_pfn); -} - -static u64 __init __memblock_x86_memory_in_range(u64 addr, u64 limit, bool get_free) -{ - int i, count; - struct range *range; - int nr_range; - u64 final_start, final_end; - u64 free_size; - struct memblock_region *r; - - count = (memblock.reserved.cnt + memblock.memory.cnt) * 2; - - range = find_range_array(count); - nr_range = 0; - - addr = PFN_UP(addr); - limit = PFN_DOWN(limit); - - for_each_memblock(memory, r) { - final_start = PFN_UP(r->base); - final_end = PFN_DOWN(r->base + r->size); - if (final_start >= final_end) - continue; - if (final_start >= limit || final_end <= addr) - continue; - - nr_range = add_range(range, count, nr_range, final_start, final_end); - } - subtract_range(range, count, 0, addr); - subtract_range(range, count, limit, -1ULL); - - /* Subtract memblock.reserved.region in range ? */ - if (!get_free) - goto sort_and_count_them; - for_each_memblock(reserved, r) { - final_start = PFN_DOWN(r->base); - final_end = PFN_UP(r->base + r->size); - if (final_start >= final_end) - continue; - if (final_start >= limit || final_end <= addr) - continue; - - subtract_range(range, count, final_start, final_end); - } - -sort_and_count_them: - nr_range = clean_sort_range(range, count); - - free_size = 0; - for (i = 0; i < nr_range; i++) - free_size += range[i].end - range[i].start; - - return free_size << PAGE_SHIFT; -} - -u64 __init memblock_x86_free_memory_in_range(u64 addr, u64 limit) -{ - return __memblock_x86_memory_in_range(addr, limit, true); -} - -u64 __init memblock_x86_memory_in_range(u64 addr, u64 limit) -{ - return __memblock_x86_memory_in_range(addr, limit, false); -} - -void __init memblock_x86_reserve_range(u64 start, u64 end, char *name) -{ - if (start == end) - return; - - if (WARN_ONCE(start > end, "memblock_x86_reserve_range: wrong range [%#llx, %#llx)\n", start, end)) - return; - - memblock_dbg(" memblock_x86_reserve_range: [%#010llx-%#010llx] %16s\n", start, end - 1, name); - - memblock_reserve(start, end - start); -} - -void __init memblock_x86_free_range(u64 start, u64 end) -{ - if (start == end) - return; - - if (WARN_ONCE(start > end, "memblock_x86_free_range: wrong range [%#llx, %#llx)\n", start, end)) - return; - - memblock_dbg(" memblock_x86_free_range: [%#010llx-%#010llx]\n", start, end - 1); - - memblock_free(start, end - start); -} - -/* - * Need to call this function after memblock_x86_register_active_regions, - * so early_node_map[] is filled already. - */ -u64 __init memblock_x86_find_in_range_node(int nid, u64 start, u64 end, u64 size, u64 align) -{ - u64 addr; - addr = find_memory_core_early(nid, size, align, start, end); - if (addr != MEMBLOCK_ERROR) - return addr; - - /* Fallback, should already have start end within node range */ - return memblock_find_in_range(start, end, size, align); -} - -/* - * Finds an active region in the address range from start_pfn to last_pfn and - * returns its range in ei_startpfn and ei_endpfn for the memblock entry. - */ -static int __init memblock_x86_find_active_region(const struct memblock_region *ei, - unsigned long start_pfn, - unsigned long last_pfn, - unsigned long *ei_startpfn, - unsigned long *ei_endpfn) -{ - u64 align = PAGE_SIZE; - - *ei_startpfn = round_up(ei->base, align) >> PAGE_SHIFT; - *ei_endpfn = round_down(ei->base + ei->size, align) >> PAGE_SHIFT; - - /* Skip map entries smaller than a page */ - if (*ei_startpfn >= *ei_endpfn) - return 0; - - /* Skip if map is outside the node */ - if (*ei_endpfn <= start_pfn || *ei_startpfn >= last_pfn) - return 0; - - /* Check for overlaps */ - if (*ei_startpfn < start_pfn) - *ei_startpfn = start_pfn; - if (*ei_endpfn > last_pfn) - *ei_endpfn = last_pfn; - - return 1; -} - -/* Walk the memblock.memory map and register active regions within a node */ -void __init memblock_x86_register_active_regions(int nid, unsigned long start_pfn, - unsigned long last_pfn) -{ - unsigned long ei_startpfn; - unsigned long ei_endpfn; - struct memblock_region *r; - - for_each_memblock(memory, r) - if (memblock_x86_find_active_region(r, start_pfn, last_pfn, - &ei_startpfn, &ei_endpfn)) - add_active_range(nid, ei_startpfn, ei_endpfn); -} - -/* - * Find the hole size (in bytes) in the memory range. - * @start: starting address of the memory range to scan - * @end: ending address of the memory range to scan - */ -u64 __init memblock_x86_hole_size(u64 start, u64 end) -{ - unsigned long start_pfn = start >> PAGE_SHIFT; - unsigned long last_pfn = end >> PAGE_SHIFT; - unsigned long ei_startpfn, ei_endpfn, ram = 0; - struct memblock_region *r; - - for_each_memblock(memory, r) - if (memblock_x86_find_active_region(r, start_pfn, last_pfn, - &ei_startpfn, &ei_endpfn)) - ram += ei_endpfn - ei_startpfn; - - return end - start - ((u64)ram << PAGE_SHIFT); -} diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c index 92faf3a1c53e..c80b9fb95734 100644 --- a/arch/x86/mm/memtest.c +++ b/arch/x86/mm/memtest.c @@ -34,7 +34,7 @@ static void __init reserve_bad_mem(u64 pattern, u64 start_bad, u64 end_bad) (unsigned long long) pattern, (unsigned long long) start_bad, (unsigned long long) end_bad); - memblock_x86_reserve_range(start_bad, end_bad, "BAD RAM"); + memblock_reserve(start_bad, end_bad - start_bad); } static void __init memtest(u64 pattern, u64 start_phys, u64 size) @@ -70,24 +70,19 @@ static void __init memtest(u64 pattern, u64 start_phys, u64 size) static void __init do_one_pass(u64 pattern, u64 start, u64 end) { - u64 size = 0; - - while (start < end) { - start = memblock_x86_find_in_range_size(start, &size, 1); - - /* done ? */ - if (start >= end) - break; - if (start + size > end) - size = end - start; - - printk(KERN_INFO " %010llx - %010llx pattern %016llx\n", - (unsigned long long) start, - (unsigned long long) start + size, - (unsigned long long) cpu_to_be64(pattern)); - memtest(pattern, start, size); - - start += size; + u64 i; + phys_addr_t this_start, this_end; + + for_each_free_mem_range(i, MAX_NUMNODES, &this_start, &this_end, NULL) { + this_start = clamp_t(phys_addr_t, this_start, start, end); + this_end = clamp_t(phys_addr_t, this_end, start, end); + if (this_start < this_end) { + printk(KERN_INFO " %010llx - %010llx pattern %016llx\n", + (unsigned long long)this_start, + (unsigned long long)this_end, + (unsigned long long)cpu_to_be64(pattern)); + memtest(pattern, this_start, this_end - this_start); + } } } diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index fbeaaf416610..496f494593bf 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -192,8 +192,6 @@ int __init numa_add_memblk(int nid, u64 start, u64 end) /* Initialize NODE_DATA for a node on the local memory */ static void __init setup_node_data(int nid, u64 start, u64 end) { - const u64 nd_low = PFN_PHYS(MAX_DMA_PFN); - const u64 nd_high = PFN_PHYS(max_pfn_mapped); const size_t nd_size = roundup(sizeof(pg_data_t), PAGE_SIZE); bool remapped = false; u64 nd_pa; @@ -224,17 +222,12 @@ static void __init setup_node_data(int nid, u64 start, u64 end) nd_pa = __pa(nd); remapped = true; } else { - nd_pa = memblock_x86_find_in_range_node(nid, nd_low, nd_high, - nd_size, SMP_CACHE_BYTES); - if (nd_pa == MEMBLOCK_ERROR) - nd_pa = memblock_find_in_range(nd_low, nd_high, - nd_size, SMP_CACHE_BYTES); - if (nd_pa == MEMBLOCK_ERROR) { + nd_pa = memblock_alloc_nid(nd_size, SMP_CACHE_BYTES, nid); + if (!nd_pa) { pr_err("Cannot find %zu bytes in node %d\n", nd_size, nid); return; } - memblock_x86_reserve_range(nd_pa, nd_pa + nd_size, "NODE_DATA"); nd = __va(nd_pa); } @@ -371,8 +364,7 @@ void __init numa_reset_distance(void) /* numa_distance could be 1LU marking allocation failure, test cnt */ if (numa_distance_cnt) - memblock_x86_free_range(__pa(numa_distance), - __pa(numa_distance) + size); + memblock_free(__pa(numa_distance), size); numa_distance_cnt = 0; numa_distance = NULL; /* enable table creation */ } @@ -395,13 +387,13 @@ static int __init numa_alloc_distance(void) phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped), size, PAGE_SIZE); - if (phys == MEMBLOCK_ERROR) { + if (!phys) { pr_warning("NUMA: Warning: can't allocate distance table!\n"); /* don't retry until explicitly reset */ numa_distance = (void *)1LU; return -ENOMEM; } - memblock_x86_reserve_range(phys, phys + size, "NUMA DIST"); + memblock_reserve(phys, size); numa_distance = __va(phys); numa_distance_cnt = cnt; @@ -482,8 +474,8 @@ static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi) numaram = 0; } - e820ram = max_pfn - (memblock_x86_hole_size(0, - PFN_PHYS(max_pfn)) >> PAGE_SHIFT); + e820ram = max_pfn - absent_pages_in_range(0, max_pfn); + /* We seem to lose 3 pages somewhere. Allow 1M of slack. */ if ((s64)(e820ram - numaram) >= (1 << (20 - PAGE_SHIFT))) { printk(KERN_ERR "NUMA: nodes only cover %LuMB of your %LuMB e820 RAM. Not used.\n", @@ -505,13 +497,10 @@ static int __init numa_register_memblks(struct numa_meminfo *mi) if (WARN_ON(nodes_empty(node_possible_map))) return -EINVAL; - for (i = 0; i < mi->nr_blks; i++) - memblock_x86_register_active_regions(mi->blk[i].nid, - mi->blk[i].start >> PAGE_SHIFT, - mi->blk[i].end >> PAGE_SHIFT); - - /* for out of order entries */ - sort_node_map(); + for (i = 0; i < mi->nr_blks; i++) { + struct numa_memblk *mb = &mi->blk[i]; + memblock_set_node(mb->start, mb->end - mb->start, mb->nid); + } /* * If sections array is gonna be used for pfn -> nid mapping, check @@ -545,6 +534,8 @@ static int __init numa_register_memblks(struct numa_meminfo *mi) setup_node_data(nid, start, end); } + /* Dump memblock with node info and return. */ + memblock_dump_all(); return 0; } @@ -582,7 +573,7 @@ static int __init numa_init(int (*init_func)(void)) nodes_clear(node_possible_map); nodes_clear(node_online_map); memset(&numa_meminfo, 0, sizeof(numa_meminfo)); - remove_all_active_ranges(); + WARN_ON(memblock_set_node(0, ULLONG_MAX, MAX_NUMNODES)); numa_reset_distance(); ret = init_func(); diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 3adebe7e536a..534255a36b6b 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -199,23 +199,23 @@ void __init init_alloc_remap(int nid, u64 start, u64 end) /* allocate node memory and the lowmem remap area */ node_pa = memblock_find_in_range(start, end, size, LARGE_PAGE_BYTES); - if (node_pa == MEMBLOCK_ERROR) { + if (!node_pa) { pr_warning("remap_alloc: failed to allocate %lu bytes for node %d\n", size, nid); return; } - memblock_x86_reserve_range(node_pa, node_pa + size, "KVA RAM"); + memblock_reserve(node_pa, size); remap_pa = memblock_find_in_range(min_low_pfn << PAGE_SHIFT, max_low_pfn << PAGE_SHIFT, size, LARGE_PAGE_BYTES); - if (remap_pa == MEMBLOCK_ERROR) { + if (!remap_pa) { pr_warning("remap_alloc: failed to allocate %lu bytes remap area for node %d\n", size, nid); - memblock_x86_free_range(node_pa, node_pa + size); + memblock_free(node_pa, size); return; } - memblock_x86_reserve_range(remap_pa, remap_pa + size, "KVA PG"); + memblock_reserve(remap_pa, size); remap_va = phys_to_virt(remap_pa); /* perform actual remap */ diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index dd27f401f0a0..92e27119ee1a 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -19,7 +19,7 @@ unsigned long __init numa_free_all_bootmem(void) for_each_online_node(i) pages += free_all_bootmem_node(NODE_DATA(i)); - pages += free_all_memory_core_early(MAX_NUMNODES); + pages += free_low_memory_core_early(MAX_NUMNODES); return pages; } diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c index d0ed086b6247..46db56845f18 100644 --- a/arch/x86/mm/numa_emulation.c +++ b/arch/x86/mm/numa_emulation.c @@ -28,6 +28,16 @@ static int __init emu_find_memblk_by_nid(int nid, const struct numa_meminfo *mi) return -ENOENT; } +static u64 mem_hole_size(u64 start, u64 end) +{ + unsigned long start_pfn = PFN_UP(start); + unsigned long end_pfn = PFN_DOWN(end); + + if (start_pfn < end_pfn) + return PFN_PHYS(absent_pages_in_range(start_pfn, end_pfn)); + return 0; +} + /* * Sets up nid to range from @start to @end. The return value is -errno if * something went wrong, 0 otherwise. @@ -89,7 +99,7 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei, * Calculate target node size. x86_32 freaks on __udivdi3() so do * the division in ulong number of pages and convert back. */ - size = max_addr - addr - memblock_x86_hole_size(addr, max_addr); + size = max_addr - addr - mem_hole_size(addr, max_addr); size = PFN_PHYS((unsigned long)(size >> PAGE_SHIFT) / nr_nodes); /* @@ -135,8 +145,7 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei, * Continue to add memory to this fake node if its * non-reserved memory is less than the per-node size. */ - while (end - start - - memblock_x86_hole_size(start, end) < size) { + while (end - start - mem_hole_size(start, end) < size) { end += FAKE_NODE_MIN_SIZE; if (end > limit) { end = limit; @@ -150,7 +159,7 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei, * this one must extend to the boundary. */ if (end < dma32_end && dma32_end - end - - memblock_x86_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE) + mem_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE) end = dma32_end; /* @@ -158,8 +167,7 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei, * next node, this one must extend to the end of the * physical node. */ - if (limit - end - - memblock_x86_hole_size(end, limit) < size) + if (limit - end - mem_hole_size(end, limit) < size) end = limit; ret = emu_setup_memblk(ei, pi, nid++ % nr_nodes, @@ -180,7 +188,7 @@ static u64 __init find_end_of_node(u64 start, u64 max_addr, u64 size) { u64 end = start + size; - while (end - start - memblock_x86_hole_size(start, end) < size) { + while (end - start - mem_hole_size(start, end) < size) { end += FAKE_NODE_MIN_SIZE; if (end > max_addr) { end = max_addr; @@ -211,8 +219,7 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei, * creates a uniform distribution of node sizes across the entire * machine (but not necessarily over physical nodes). */ - min_size = (max_addr - addr - memblock_x86_hole_size(addr, max_addr)) / - MAX_NUMNODES; + min_size = (max_addr - addr - mem_hole_size(addr, max_addr)) / MAX_NUMNODES; min_size = max(min_size, FAKE_NODE_MIN_SIZE); if ((min_size & FAKE_NODE_MIN_HASH_MASK) < min_size) min_size = (min_size + FAKE_NODE_MIN_SIZE) & @@ -252,7 +259,7 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei, * this one must extend to the boundary. */ if (end < dma32_end && dma32_end - end - - memblock_x86_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE) + mem_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE) end = dma32_end; /* @@ -260,8 +267,7 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei, * next node, this one must extend to the end of the * physical node. */ - if (limit - end - - memblock_x86_hole_size(end, limit) < size) + if (limit - end - mem_hole_size(end, limit) < size) end = limit; ret = emu_setup_memblk(ei, pi, nid++ % MAX_NUMNODES, @@ -351,11 +357,11 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped), phys_size, PAGE_SIZE); - if (phys == MEMBLOCK_ERROR) { + if (!phys) { pr_warning("NUMA: Warning: can't allocate copy of distance table, disabling emulation\n"); goto no_emu; } - memblock_x86_reserve_range(phys, phys + phys_size, "TMP NUMA DIST"); + memblock_reserve(phys, phys_size); phys_dist = __va(phys); for (i = 0; i < numa_dist_cnt; i++) @@ -424,7 +430,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) /* free the copied physical distance table */ if (phys_dist) - memblock_x86_free_range(__pa(phys_dist), __pa(phys_dist) + phys_size); + memblock_free(__pa(phys_dist), phys_size); return; no_emu: diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index f9e526742fa1..eda2acbb6e81 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -998,7 +998,7 @@ out_err: } EXPORT_SYMBOL(set_memory_uc); -int _set_memory_array(unsigned long *addr, int addrinarray, +static int _set_memory_array(unsigned long *addr, int addrinarray, unsigned long new_type) { int i, j; diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c index 81dbfdeb080d..fd61b3fb7341 100644 --- a/arch/x86/mm/srat.c +++ b/arch/x86/mm/srat.c @@ -69,6 +69,12 @@ acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa) if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0) return; pxm = pa->proximity_domain; + apic_id = pa->apic_id; + if (!cpu_has_x2apic && (apic_id >= 0xff)) { + printk(KERN_INFO "SRAT: PXM %u -> X2APIC 0x%04x ignored\n", + pxm, apic_id); + return; + } node = setup_node(pxm); if (node < 0) { printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm); @@ -76,7 +82,6 @@ acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa) return; } - apic_id = pa->apic_id; if (apic_id >= MAX_LOCAL_APIC) { printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node); return; diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index bfab3fa10edc..7b65f752c5f8 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -568,8 +568,8 @@ cond_branch: f_offset = addrs[i + filter[i].jf] - addrs[i]; break; } if (filter[i].jt != 0) { - if (filter[i].jf) - t_offset += is_near(f_offset) ? 2 : 6; + if (filter[i].jf && f_offset) + t_offset += is_near(f_offset) ? 2 : 5; EMIT_COND_JMP(t_op, t_offset); if (filter[i].jf) EMIT_JMP(f_offset); diff --git a/arch/x86/oprofile/Makefile b/arch/x86/oprofile/Makefile index 446902b2a6b6..1599f568f0e2 100644 --- a/arch/x86/oprofile/Makefile +++ b/arch/x86/oprofile/Makefile @@ -4,9 +4,8 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ oprof.o cpu_buffer.o buffer_sync.o \ event_buffer.o oprofile_files.o \ oprofilefs.o oprofile_stats.o \ - timer_int.o ) + timer_int.o nmi_timer_int.o ) oprofile-y := $(DRIVER_OBJS) init.o backtrace.o oprofile-$(CONFIG_X86_LOCAL_APIC) += nmi_int.o op_model_amd.o \ op_model_ppro.o op_model_p4.o -oprofile-$(CONFIG_X86_IO_APIC) += nmi_timer_int.o diff --git a/arch/x86/oprofile/init.c b/arch/x86/oprofile/init.c index cdfe4c54deca..9e138d00ad36 100644 --- a/arch/x86/oprofile/init.c +++ b/arch/x86/oprofile/init.c @@ -16,34 +16,23 @@ * with the NMI mode driver. */ +#ifdef CONFIG_X86_LOCAL_APIC extern int op_nmi_init(struct oprofile_operations *ops); -extern int op_nmi_timer_init(struct oprofile_operations *ops); extern void op_nmi_exit(void); -extern void x86_backtrace(struct pt_regs * const regs, unsigned int depth); +#else +static int op_nmi_init(struct oprofile_operations *ops) { return -ENODEV; } +static void op_nmi_exit(void) { } +#endif +extern void x86_backtrace(struct pt_regs * const regs, unsigned int depth); int __init oprofile_arch_init(struct oprofile_operations *ops) { - int ret; - - ret = -ENODEV; - -#ifdef CONFIG_X86_LOCAL_APIC - ret = op_nmi_init(ops); -#endif -#ifdef CONFIG_X86_IO_APIC - if (ret < 0) - ret = op_nmi_timer_init(ops); -#endif ops->backtrace = x86_backtrace; - - return ret; + return op_nmi_init(ops); } - void oprofile_arch_exit(void) { -#ifdef CONFIG_X86_LOCAL_APIC op_nmi_exit(); -#endif } diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index 75f9528e0372..26b8a8514ee5 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -595,24 +595,36 @@ static int __init p4_init(char **cpu_type) return 0; } -static int force_arch_perfmon; -static int force_cpu_type(const char *str, struct kernel_param *kp) +enum __force_cpu_type { + reserved = 0, /* do not force */ + timer, + arch_perfmon, +}; + +static int force_cpu_type; + +static int set_cpu_type(const char *str, struct kernel_param *kp) { - if (!strcmp(str, "arch_perfmon")) { - force_arch_perfmon = 1; + if (!strcmp(str, "timer")) { + force_cpu_type = timer; + printk(KERN_INFO "oprofile: forcing NMI timer mode\n"); + } else if (!strcmp(str, "arch_perfmon")) { + force_cpu_type = arch_perfmon; printk(KERN_INFO "oprofile: forcing architectural perfmon\n"); + } else { + force_cpu_type = 0; } return 0; } -module_param_call(cpu_type, force_cpu_type, NULL, NULL, 0); +module_param_call(cpu_type, set_cpu_type, NULL, NULL, 0); static int __init ppro_init(char **cpu_type) { __u8 cpu_model = boot_cpu_data.x86_model; struct op_x86_model_spec *spec = &op_ppro_spec; /* default */ - if (force_arch_perfmon && cpu_has_arch_perfmon) + if (force_cpu_type == arch_perfmon && cpu_has_arch_perfmon) return 0; /* @@ -679,6 +691,9 @@ int __init op_nmi_init(struct oprofile_operations *ops) if (!cpu_has_apic) return -ENODEV; + if (force_cpu_type == timer) + return -ENODEV; + switch (vendor) { case X86_VENDOR_AMD: /* Needs to be at least an Athlon (or hammer in 32bit mode) */ diff --git a/arch/x86/oprofile/nmi_timer_int.c b/arch/x86/oprofile/nmi_timer_int.c deleted file mode 100644 index 7f8052cd6620..000000000000 --- a/arch/x86/oprofile/nmi_timer_int.c +++ /dev/null @@ -1,50 +0,0 @@ -/** - * @file nmi_timer_int.c - * - * @remark Copyright 2003 OProfile authors - * @remark Read the file COPYING - * - * @author Zwane Mwaikambo <zwane@linuxpower.ca> - */ - -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/errno.h> -#include <linux/oprofile.h> -#include <linux/rcupdate.h> -#include <linux/kdebug.h> - -#include <asm/nmi.h> -#include <asm/apic.h> -#include <asm/ptrace.h> - -static int profile_timer_exceptions_notify(unsigned int val, struct pt_regs *regs) -{ - oprofile_add_sample(regs, 0); - return NMI_HANDLED; -} - -static int timer_start(void) -{ - if (register_nmi_handler(NMI_LOCAL, profile_timer_exceptions_notify, - 0, "oprofile-timer")) - return 1; - return 0; -} - - -static void timer_stop(void) -{ - unregister_nmi_handler(NMI_LOCAL, "oprofile-timer"); - synchronize_sched(); /* Allow already-started NMIs to complete. */ -} - - -int __init op_nmi_timer_init(struct oprofile_operations *ops) -{ - ops->start = timer_start; - ops->stop = timer_stop; - ops->cpu_type = "timer"; - printk(KERN_INFO "oprofile: using NMI timer interrupt.\n"); - return 0; -} diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 404f21a3ff9e..a312e76063a7 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -12,7 +12,7 @@ struct pci_root_info { char *name; unsigned int res_num; struct resource *res; - struct pci_bus *bus; + struct list_head *resources; int busnum; }; @@ -24,6 +24,12 @@ static int __init set_use_crs(const struct dmi_system_id *id) return 0; } +static int __init set_nouse_crs(const struct dmi_system_id *id) +{ + pci_use_crs = false; + return 0; +} + static const struct dmi_system_id pci_use_crs_table[] __initconst = { /* http://bugzilla.kernel.org/show_bug.cgi?id=14183 */ { @@ -54,6 +60,29 @@ static const struct dmi_system_id pci_use_crs_table[] __initconst = { DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), }, }, + + /* Now for the blacklist.. */ + + /* https://bugzilla.redhat.com/show_bug.cgi?id=769657 */ + { + .callback = set_nouse_crs, + .ident = "Dell Studio 1557", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1557"), + DMI_MATCH(DMI_BIOS_VERSION, "A09"), + }, + }, + /* https://bugzilla.redhat.com/show_bug.cgi?id=769657 */ + { + .callback = set_nouse_crs, + .ident = "Thinkpad SL510", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BOARD_NAME, "2847DFG"), + DMI_MATCH(DMI_BIOS_VERSION, "6JET85WW (1.43 )"), + }, + }, {} }; @@ -149,7 +178,7 @@ setup_resource(struct acpi_resource *acpi_res, void *data) struct acpi_resource_address64 addr; acpi_status status; unsigned long flags; - u64 start, end; + u64 start, orig_end, end; status = resource_to_addr(acpi_res, &addr); if (!ACPI_SUCCESS(status)) @@ -165,7 +194,21 @@ setup_resource(struct acpi_resource *acpi_res, void *data) return AE_OK; start = addr.minimum + addr.translation_offset; - end = addr.maximum + addr.translation_offset; + orig_end = end = addr.maximum + addr.translation_offset; + + /* Exclude non-addressable range or non-addressable portion of range */ + end = min(end, (u64)iomem_resource.end); + if (end <= start) { + dev_info(&info->bridge->dev, + "host bridge window [%#llx-%#llx] " + "(ignored, not CPU addressable)\n", start, orig_end); + return AE_OK; + } else if (orig_end != end) { + dev_info(&info->bridge->dev, + "host bridge window [%#llx-%#llx] " + "([%#llx-%#llx] ignored, not CPU addressable)\n", + start, orig_end, end + 1, orig_end); + } res = &info->res[info->res_num]; res->name = info->name; @@ -261,23 +304,20 @@ static void add_resources(struct pci_root_info *info) "ignoring host bridge window %pR (conflicts with %s %pR)\n", res, conflict->name, conflict); else - pci_bus_add_resource(info->bus, res, 0); + pci_add_resource(info->resources, res); } } static void get_current_resources(struct acpi_device *device, int busnum, - int domain, struct pci_bus *bus) + int domain, struct list_head *resources) { struct pci_root_info info; size_t size; - if (pci_use_crs) - pci_bus_remove_resources(bus); - info.bridge = device; - info.bus = bus; info.res_num = 0; + info.resources = resources; acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_resource, &info); if (!info.res_num) @@ -286,7 +326,7 @@ get_current_resources(struct acpi_device *device, int busnum, size = sizeof(*info.res) * info.res_num; info.res = kmalloc(size, GFP_KERNEL); if (!info.res) - goto res_alloc_fail; + return; info.name = kasprintf(GFP_KERNEL, "PCI Bus %04x:%02x", domain, busnum); if (!info.name) @@ -301,8 +341,6 @@ get_current_resources(struct acpi_device *device, int busnum, name_alloc_fail: kfree(info.res); -res_alloc_fail: - return; } struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_pci_root *root) @@ -310,6 +348,7 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_pci_root *root) struct acpi_device *device = root->device; int domain = root->segment; int busnum = root->secondary.start; + LIST_HEAD(resources); struct pci_bus *bus; struct pci_sysdata *sd; int node; @@ -364,11 +403,15 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_pci_root *root) memcpy(bus->sysdata, sd, sizeof(*sd)); kfree(sd); } else { - bus = pci_create_bus(NULL, busnum, &pci_root_ops, sd); - if (bus) { - get_current_resources(device, busnum, domain, bus); + get_current_resources(device, busnum, domain, &resources); + if (list_empty(&resources)) + x86_pci_root_bus_resources(busnum, &resources); + bus = pci_create_root_bus(NULL, busnum, &pci_root_ops, sd, + &resources); + if (bus) bus->subordinate = pci_scan_child_bus(bus); - } + else + pci_free_resource_list(&resources); } /* After the PCI-E bus has been walked and all devices discovered, diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index 026e4931d162..0567df3890e1 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -30,34 +30,6 @@ static struct pci_hostbridge_probe pci_probes[] __initdata = { { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 }, }; -static u64 __initdata fam10h_mmconf_start; -static u64 __initdata fam10h_mmconf_end; -static void __init get_pci_mmcfg_amd_fam10h_range(void) -{ - u32 address; - u64 base, msr; - unsigned segn_busn_bits; - - /* assume all cpus from fam10h have mmconf */ - if (boot_cpu_data.x86 < 0x10) - return; - - address = MSR_FAM10H_MMIO_CONF_BASE; - rdmsrl(address, msr); - - /* mmconfig is not enable */ - if (!(msr & FAM10H_MMIO_CONF_ENABLE)) - return; - - base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT); - - segn_busn_bits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) & - FAM10H_MMIO_CONF_BUSRANGE_MASK; - - fam10h_mmconf_start = base; - fam10h_mmconf_end = base + (1ULL<<(segn_busn_bits + 20)) - 1; -} - #define RANGE_NUM 16 /** @@ -85,6 +57,9 @@ static int __init early_fill_mp_bus_info(void) u64 val; u32 address; bool found; + struct resource fam10h_mmconf_res, *fam10h_mmconf; + u64 fam10h_mmconf_start; + u64 fam10h_mmconf_end; if (!early_pci_allowed()) return -1; @@ -211,12 +186,17 @@ static int __init early_fill_mp_bus_info(void) subtract_range(range, RANGE_NUM, 0, end); /* get mmconfig */ - get_pci_mmcfg_amd_fam10h_range(); + fam10h_mmconf = amd_get_mmconfig_range(&fam10h_mmconf_res); /* need to take out mmconf range */ - if (fam10h_mmconf_end) { - printk(KERN_DEBUG "Fam 10h mmconf [%llx, %llx]\n", fam10h_mmconf_start, fam10h_mmconf_end); + if (fam10h_mmconf) { + printk(KERN_DEBUG "Fam 10h mmconf %pR\n", fam10h_mmconf); + fam10h_mmconf_start = fam10h_mmconf->start; + fam10h_mmconf_end = fam10h_mmconf->end; subtract_range(range, RANGE_NUM, fam10h_mmconf_start, fam10h_mmconf_end + 1); + } else { + fam10h_mmconf_start = 0; + fam10h_mmconf_end = 0; } /* mmio resource */ @@ -403,7 +383,6 @@ static void __init pci_enable_pci_io_ecs(void) ++n; } } - pr_info("Extended Config Space enabled on %u nodes\n", n); #endif } diff --git a/arch/x86/pci/broadcom_bus.c b/arch/x86/pci/broadcom_bus.c index ab8269b0da29..f3a7c569a403 100644 --- a/arch/x86/pci/broadcom_bus.c +++ b/arch/x86/pci/broadcom_bus.c @@ -15,10 +15,11 @@ #include <linux/pci.h> #include <linux/init.h> #include <asm/pci_x86.h> +#include <asm/pci-direct.h> #include "bus_numa.h" -static void __devinit cnb20le_res(struct pci_dev *dev) +static void __init cnb20le_res(u8 bus, u8 slot, u8 func) { struct pci_root_info *info; struct resource res; @@ -26,21 +27,12 @@ static void __devinit cnb20le_res(struct pci_dev *dev) u8 fbus, lbus; int i; -#ifdef CONFIG_ACPI - /* - * We should get host bridge information from ACPI unless the BIOS - * doesn't support it. - */ - if (acpi_os_get_root_pointer()) - return; -#endif - info = &pci_root_info[pci_root_num]; pci_root_num++; /* read the PCI bus numbers */ - pci_read_config_byte(dev, 0x44, &fbus); - pci_read_config_byte(dev, 0x45, &lbus); + fbus = read_pci_config_byte(bus, slot, func, 0x44); + lbus = read_pci_config_byte(bus, slot, func, 0x45); info->bus_min = fbus; info->bus_max = lbus; @@ -59,8 +51,8 @@ static void __devinit cnb20le_res(struct pci_dev *dev) } /* read the non-prefetchable memory window */ - pci_read_config_word(dev, 0xc0, &word1); - pci_read_config_word(dev, 0xc2, &word2); + word1 = read_pci_config_16(bus, slot, func, 0xc0); + word2 = read_pci_config_16(bus, slot, func, 0xc2); if (word1 != word2) { res.start = (word1 << 16) | 0x0000; res.end = (word2 << 16) | 0xffff; @@ -69,8 +61,8 @@ static void __devinit cnb20le_res(struct pci_dev *dev) } /* read the prefetchable memory window */ - pci_read_config_word(dev, 0xc4, &word1); - pci_read_config_word(dev, 0xc6, &word2); + word1 = read_pci_config_16(bus, slot, func, 0xc4); + word2 = read_pci_config_16(bus, slot, func, 0xc6); if (word1 != word2) { res.start = (word1 << 16) | 0x0000; res.end = (word2 << 16) | 0xffff; @@ -79,8 +71,8 @@ static void __devinit cnb20le_res(struct pci_dev *dev) } /* read the IO port window */ - pci_read_config_word(dev, 0xd0, &word1); - pci_read_config_word(dev, 0xd2, &word2); + word1 = read_pci_config_16(bus, slot, func, 0xd0); + word2 = read_pci_config_16(bus, slot, func, 0xd2); if (word1 != word2) { res.start = word1; res.end = word2; @@ -92,13 +84,37 @@ static void __devinit cnb20le_res(struct pci_dev *dev) res.start = fbus; res.end = lbus; res.flags = IORESOURCE_BUS; - dev_info(&dev->dev, "CNB20LE PCI Host Bridge (domain %04x %pR)\n", - pci_domain_nr(dev->bus), &res); + printk(KERN_INFO "CNB20LE PCI Host Bridge (domain 0000 %pR)\n", &res); for (i = 0; i < info->res_num; i++) - dev_info(&dev->dev, "host bridge window %pR\n", &info->res[i]); + printk(KERN_INFO "host bridge window %pR\n", &info->res[i]); } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_LE, - cnb20le_res); +static int __init broadcom_postcore_init(void) +{ + u8 bus = 0, slot = 0; + u32 id; + u16 vendor, device; + +#ifdef CONFIG_ACPI + /* + * We should get host bridge information from ACPI unless the BIOS + * doesn't support it. + */ + if (acpi_os_get_root_pointer()) + return 0; +#endif + + id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID); + vendor = id & 0xffff; + device = (id >> 16) & 0xffff; + + if (vendor == PCI_VENDOR_ID_SERVERWORKS && + device == PCI_DEVICE_ID_SERVERWORKS_LE) { + cnb20le_res(bus, slot, 0); + cnb20le_res(bus, slot, 1); + } + return 0; +} +postcore_initcall(broadcom_postcore_init); diff --git a/arch/x86/pci/bus_numa.c b/arch/x86/pci/bus_numa.c index 64a122883896..fd3f65510e9d 100644 --- a/arch/x86/pci/bus_numa.c +++ b/arch/x86/pci/bus_numa.c @@ -7,45 +7,50 @@ int pci_root_num; struct pci_root_info pci_root_info[PCI_ROOT_NR]; -void x86_pci_root_bus_res_quirks(struct pci_bus *b) +void x86_pci_root_bus_resources(int bus, struct list_head *resources) { int i; int j; struct pci_root_info *info; - /* don't go for it if _CRS is used already */ - if (b->resource[0] != &ioport_resource || - b->resource[1] != &iomem_resource) - return; - if (!pci_root_num) - return; + goto default_resources; for (i = 0; i < pci_root_num; i++) { - if (pci_root_info[i].bus_min == b->number) + if (pci_root_info[i].bus_min == bus) break; } if (i == pci_root_num) - return; + goto default_resources; - printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n", - b->number); + printk(KERN_DEBUG "PCI: root bus %02x: hardware-probed resources\n", + bus); - pci_bus_remove_resources(b); info = &pci_root_info[i]; for (j = 0; j < info->res_num; j++) { struct resource *res; struct resource *root; res = &info->res[j]; - pci_bus_add_resource(b, res, 0); + pci_add_resource(resources, res); if (res->flags & IORESOURCE_IO) root = &ioport_resource; else root = &iomem_resource; insert_resource(root, res); } + return; + +default_resources: + /* + * We don't have any host bridge aperture information from the + * "native host bridge drivers," e.g., amd_bus or broadcom_bus, + * so fall back to the defaults historically used by pci_create_bus(). + */ + printk(KERN_DEBUG "PCI: root bus %02x: using default resources\n", bus); + pci_add_resource(resources, &ioport_resource); + pci_add_resource(resources, &iomem_resource); } void __devinit update_res(struct pci_root_info *info, resource_size_t start, diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 7962ccb4d9b2..323481e06ef8 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -164,9 +164,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *b) { struct pci_dev *dev; - /* root bus? */ - if (!b->parent) - x86_pci_root_bus_res_quirks(b); pci_read_bridge_bases(b); list_for_each_entry(dev, &b->devices, bus_list) pcibios_fixup_device_resources(dev); @@ -433,6 +430,7 @@ void __init dmi_check_pciprobe(void) struct pci_bus * __devinit pcibios_scan_root(int busnum) { + LIST_HEAD(resources); struct pci_bus *bus = NULL; struct pci_sysdata *sd; @@ -456,9 +454,12 @@ struct pci_bus * __devinit pcibios_scan_root(int busnum) sd->node = get_mp_bus_to_node(busnum); printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum); - bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); - if (!bus) + x86_pci_root_bus_resources(busnum, &resources); + bus = pci_scan_root_bus(NULL, busnum, &pci_root_ops, sd, &resources); + if (!bus) { + pci_free_resource_list(&resources); kfree(sd); + } return bus; } @@ -639,6 +640,7 @@ int pci_ext_cfg_avail(struct pci_dev *dev) struct pci_bus * __devinit pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node) { + LIST_HEAD(resources); struct pci_bus *bus = NULL; struct pci_sysdata *sd; @@ -653,9 +655,12 @@ struct pci_bus * __devinit pci_scan_bus_on_node(int busno, struct pci_ops *ops, return NULL; } sd->node = node; - bus = pci_scan_bus(busno, ops, sd); - if (!bus) + x86_pci_root_bus_resources(busno, &resources); + bus = pci_scan_root_bus(NULL, busno, ops, sd, &resources); + if (!bus) { + pci_free_resource_list(&resources); kfree(sd); + } return bus; } diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index 794b092d01ae..91821a1a0c3a 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -254,26 +254,6 @@ void __init pcibios_resource_survey(void) */ fs_initcall(pcibios_assign_resources); -/* - * If we set up a device for bus mastering, we need to check the latency - * timer as certain crappy BIOSes forget to set it properly. - */ -unsigned int pcibios_max_latency = 255; - -void pcibios_set_master(struct pci_dev *dev) -{ - u8 lat; - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - else - return; - dev_printk(KERN_DEBUG, &dev->dev, "setting latency timer to %d\n", lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} - static const struct vm_operations_struct pci_mmap_ops = { .access = generic_access_phys, }; diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c index 2c2aeabc2609..a1df191129d3 100644 --- a/arch/x86/pci/legacy.c +++ b/arch/x86/pci/legacy.c @@ -31,9 +31,6 @@ int __init pci_legacy_init(void) printk("PCI: Probing PCI hardware\n"); pci_root_bus = pcibios_scan_root(0); - if (pci_root_bus) - pci_bus_add_devices(pci_root_bus); - return 0; } diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c index 51abf02f9226..83e125b95ca6 100644 --- a/arch/x86/pci/numaq_32.c +++ b/arch/x86/pci/numaq_32.c @@ -153,8 +153,6 @@ int __init pci_numaq_init(void) raw_pci_ops = &pci_direct_conf1_mq; pci_root_bus = pcibios_scan_root(0); - if (pci_root_bus) - pci_bus_add_devices(pci_root_bus); if (num_online_nodes() > 1) for_each_online_node(quad) { if (quad == 0) diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c index db0e9a51e611..da8fe0535ff4 100644 --- a/arch/x86/pci/pcbios.c +++ b/arch/x86/pci/pcbios.c @@ -44,7 +44,7 @@ static inline void set_bios_x(void) pcibios_enabled = 1; set_memory_x(PAGE_OFFSET + BIOS_BEGIN, (BIOS_END - BIOS_BEGIN) >> PAGE_SHIFT); if (__supported_pte_mask & _PAGE_NX) - printk(KERN_INFO "PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.\n"); + printk(KERN_INFO "PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.\n"); } /* diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 37718f0f053d..4cf9bd0a1653 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -238,7 +238,8 @@ static efi_status_t __init phys_efi_get_time(efi_time_t *tm, spin_lock_irqsave(&rtc_lock, flags); efi_call_phys_prelog(); - status = efi_call_phys2(efi_phys.get_time, tm, tc); + status = efi_call_phys2(efi_phys.get_time, virt_to_phys(tm), + virt_to_phys(tc)); efi_call_phys_epilog(); spin_unlock_irqrestore(&rtc_lock, flags); return status; @@ -352,8 +353,7 @@ void __init efi_memblock_x86_reserve_range(void) boot_params.efi_info.efi_memdesc_size; memmap.desc_version = boot_params.efi_info.efi_memdesc_version; memmap.desc_size = boot_params.efi_info.efi_memdesc_size; - memblock_x86_reserve_range(pmap, pmap + memmap.nr_map * memmap.desc_size, - "EFI memmap"); + memblock_reserve(pmap, memmap.nr_map * memmap.desc_size); } #if EFI_DEBUG @@ -397,16 +397,14 @@ void __init efi_reserve_boot_services(void) if ((start+size >= virt_to_phys(_text) && start <= virt_to_phys(_end)) || !e820_all_mapped(start, start+size, E820_RAM) || - memblock_x86_check_reserved_size(&start, &size, - 1<<EFI_PAGE_SHIFT)) { + memblock_is_region_reserved(start, size)) { /* Could not reserve, skip it */ md->num_pages = 0; memblock_dbg(PFX "Could not reserve boot range " "[0x%010llx-0x%010llx]\n", start, start+size-1); } else - memblock_x86_reserve_range(start, start+size, - "EFI Boot"); + memblock_reserve(start, size); } } diff --git a/arch/x86/platform/efi/efi_32.c b/arch/x86/platform/efi/efi_32.c index e36bf714cb77..40e446941dd7 100644 --- a/arch/x86/platform/efi/efi_32.c +++ b/arch/x86/platform/efi/efi_32.c @@ -39,43 +39,14 @@ */ static unsigned long efi_rt_eflags; -static pgd_t efi_bak_pg_dir_pointer[2]; void efi_call_phys_prelog(void) { - unsigned long cr4; - unsigned long temp; struct desc_ptr gdt_descr; local_irq_save(efi_rt_eflags); - /* - * If I don't have PAE, I should just duplicate two entries in page - * directory. If I have PAE, I just need to duplicate one entry in - * page directory. - */ - cr4 = read_cr4_safe(); - - if (cr4 & X86_CR4_PAE) { - efi_bak_pg_dir_pointer[0].pgd = - swapper_pg_dir[pgd_index(0)].pgd; - swapper_pg_dir[0].pgd = - swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd; - } else { - efi_bak_pg_dir_pointer[0].pgd = - swapper_pg_dir[pgd_index(0)].pgd; - efi_bak_pg_dir_pointer[1].pgd = - swapper_pg_dir[pgd_index(0x400000)].pgd; - swapper_pg_dir[pgd_index(0)].pgd = - swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd; - temp = PAGE_OFFSET + 0x400000; - swapper_pg_dir[pgd_index(0x400000)].pgd = - swapper_pg_dir[pgd_index(temp)].pgd; - } - - /* - * After the lock is released, the original page table is restored. - */ + load_cr3(initial_page_table); __flush_tlb_all(); gdt_descr.address = __pa(get_cpu_gdt_table(0)); @@ -85,28 +56,13 @@ void efi_call_phys_prelog(void) void efi_call_phys_epilog(void) { - unsigned long cr4; struct desc_ptr gdt_descr; gdt_descr.address = (unsigned long)get_cpu_gdt_table(0); gdt_descr.size = GDT_SIZE - 1; load_gdt(&gdt_descr); - cr4 = read_cr4_safe(); - - if (cr4 & X86_CR4_PAE) { - swapper_pg_dir[pgd_index(0)].pgd = - efi_bak_pg_dir_pointer[0].pgd; - } else { - swapper_pg_dir[pgd_index(0)].pgd = - efi_bak_pg_dir_pointer[0].pgd; - swapper_pg_dir[pgd_index(0x400000)].pgd = - efi_bak_pg_dir_pointer[1].pgd; - } - - /* - * After the lock is released, the original page table is restored. - */ + load_cr3(swapper_pg_dir); __flush_tlb_all(); local_irq_restore(efi_rt_eflags); diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c index 25bfdbb5b130..3c6e328483c7 100644 --- a/arch/x86/platform/mrst/early_printk_mrst.c +++ b/arch/x86/platform/mrst/early_printk_mrst.c @@ -245,16 +245,24 @@ struct console early_mrst_console = { * Following is the early console based on Medfield HSU (High * Speed UART) device. */ -#define HSU_PORT2_PADDR 0xffa28180 +#define HSU_PORT_BASE 0xffa28080 static void __iomem *phsu; -void hsu_early_console_init(void) +void hsu_early_console_init(const char *s) { + unsigned long paddr, port = 0; u8 lcr; - phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, - HSU_PORT2_PADDR); + /* + * Select the early HSU console port if specified by user in the + * kernel command line. + */ + if (*s && !kstrtoul(s, 10, &port)) + port = clamp_val(port, 0, 2); + + paddr = HSU_PORT_BASE + port * 0x80; + phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, paddr); /* Disable FIFO */ writeb(0x0, phsu + UART_FCR); diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index b1489a06a49d..ad4ec1cb097e 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -76,6 +76,20 @@ struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX]; EXPORT_SYMBOL_GPL(sfi_mrtc_array); int sfi_mrtc_num; +static void mrst_power_off(void) +{ + if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) + intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 1); +} + +static void mrst_reboot(void) +{ + if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) + intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0); + else + intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0); +} + /* parse all the mtimer info to a static mtimer array */ static int __init sfi_parse_mtmr(struct sfi_table_header *table) { @@ -265,17 +279,6 @@ static int mrst_i8042_detect(void) return 0; } -/* Reboot and power off are handled by the SCU on a MID device */ -static void mrst_power_off(void) -{ - intel_scu_ipc_simple_command(0xf1, 1); -} - -static void mrst_reboot(void) -{ - intel_scu_ipc_simple_command(0xf1, 0); -} - /* * Moorestown does not have external NMI source nor port 0x61 to report * NMI status. The possible NMI sources are from pmu as a result of NMI @@ -484,6 +487,46 @@ static void __init *max7315_platform_data(void *info) return max7315; } +static void *tca6416_platform_data(void *info) +{ + static struct pca953x_platform_data tca6416; + struct i2c_board_info *i2c_info = info; + int gpio_base, intr; + char base_pin_name[SFI_NAME_LEN + 1]; + char intr_pin_name[SFI_NAME_LEN + 1]; + + strcpy(i2c_info->type, "tca6416"); + strcpy(base_pin_name, "tca6416_base"); + strcpy(intr_pin_name, "tca6416_int"); + + gpio_base = get_gpio_by_name(base_pin_name); + intr = get_gpio_by_name(intr_pin_name); + + if (gpio_base == -1) + return NULL; + tca6416.gpio_base = gpio_base; + if (intr != -1) { + i2c_info->irq = intr + MRST_IRQ_OFFSET; + tca6416.irq_base = gpio_base + MRST_IRQ_OFFSET; + } else { + i2c_info->irq = -1; + tca6416.irq_base = -1; + } + return &tca6416; +} + +static void *mpu3050_platform_data(void *info) +{ + struct i2c_board_info *i2c_info = info; + int intr = get_gpio_by_name("mpu3050_int"); + + if (intr == -1) + return NULL; + + i2c_info->irq = intr + MRST_IRQ_OFFSET; + return NULL; +} + static void __init *emc1403_platform_data(void *info) { static short intr2nd_pdata; @@ -646,12 +689,15 @@ static void *msic_ocd_platform_data(void *info) static const struct devs_id __initconst device_ids[] = { {"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data}, {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data}, + {"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data}, {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data}, {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, + {"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data}, {"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data}, {"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data}, {"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data}, + {"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data}, /* MSIC subdevices */ {"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data}, diff --git a/arch/x86/platform/uv/uv_sysfs.c b/arch/x86/platform/uv/uv_sysfs.c index 309c70fb7759..5d4ba301e776 100644 --- a/arch/x86/platform/uv/uv_sysfs.c +++ b/arch/x86/platform/uv/uv_sysfs.c @@ -19,7 +19,7 @@ * Copyright (c) Russ Anderson */ -#include <linux/sysdev.h> +#include <linux/device.h> #include <asm/uv/bios.h> #include <asm/uv/uv.h> diff --git a/arch/x86/tools/Makefile b/arch/x86/tools/Makefile index f82082677337..d511aa97533a 100644 --- a/arch/x86/tools/Makefile +++ b/arch/x86/tools/Makefile @@ -18,14 +18,21 @@ chkobjdump = $(srctree)/arch/x86/tools/chkobjdump.awk quiet_cmd_posttest = TEST $@ cmd_posttest = ($(OBJDUMP) -v | $(AWK) -f $(chkobjdump)) || $(OBJDUMP) -d -j .text $(objtree)/vmlinux | $(AWK) -f $(distill_awk) | $(obj)/test_get_len $(posttest_64bit) $(posttest_verbose) -posttest: $(obj)/test_get_len vmlinux +quiet_cmd_sanitytest = TEST $@ + cmd_sanitytest = $(obj)/insn_sanity $(posttest_64bit) -m 1000000 + +posttest: $(obj)/test_get_len vmlinux $(obj)/insn_sanity $(call cmd,posttest) + $(call cmd,sanitytest) -hostprogs-y := test_get_len +hostprogs-y += test_get_len insn_sanity # -I needed for generated C source and C source which in the kernel tree. HOSTCFLAGS_test_get_len.o := -Wall -I$(objtree)/arch/x86/lib/ -I$(srctree)/arch/x86/include/ -I$(srctree)/arch/x86/lib/ -I$(srctree)/include/ +HOSTCFLAGS_insn_sanity.o := -Wall -I$(objtree)/arch/x86/lib/ -I$(srctree)/arch/x86/include/ -I$(srctree)/arch/x86/lib/ -I$(srctree)/include/ + # Dependencies are also needed. $(obj)/test_get_len.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/inat.c $(srctree)/arch/x86/include/asm/inat_types.h $(srctree)/arch/x86/include/asm/inat.h $(srctree)/arch/x86/include/asm/insn.h $(objtree)/arch/x86/lib/inat-tables.c +$(obj)/insn_sanity.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/inat.c $(srctree)/arch/x86/include/asm/inat_types.h $(srctree)/arch/x86/include/asm/inat.h $(srctree)/arch/x86/include/asm/insn.h $(objtree)/arch/x86/lib/inat-tables.c diff --git a/arch/x86/tools/gen-insn-attr-x86.awk b/arch/x86/tools/gen-insn-attr-x86.awk index eaf11f52fc0b..5f6a5b6c3a15 100644 --- a/arch/x86/tools/gen-insn-attr-x86.awk +++ b/arch/x86/tools/gen-insn-attr-x86.awk @@ -47,7 +47,7 @@ BEGIN { sep_expr = "^\\|$" group_expr = "^Grp[0-9A-Za-z]+" - imm_expr = "^[IJAO][a-z]" + imm_expr = "^[IJAOL][a-z]" imm_flag["Ib"] = "INAT_MAKE_IMM(INAT_IMM_BYTE)" imm_flag["Jb"] = "INAT_MAKE_IMM(INAT_IMM_BYTE)" imm_flag["Iw"] = "INAT_MAKE_IMM(INAT_IMM_WORD)" @@ -59,6 +59,7 @@ BEGIN { imm_flag["Iv"] = "INAT_MAKE_IMM(INAT_IMM_VWORD)" imm_flag["Ob"] = "INAT_MOFFSET" imm_flag["Ov"] = "INAT_MOFFSET" + imm_flag["Lx"] = "INAT_MAKE_IMM(INAT_IMM_BYTE)" modrm_expr = "^([CDEGMNPQRSUVW/][a-z]+|NTA|T[012])" force64_expr = "\\([df]64\\)" @@ -70,8 +71,12 @@ BEGIN { lprefix3_expr = "\\(F2\\)" max_lprefix = 4 - vexok_expr = "\\(VEX\\)" - vexonly_expr = "\\(oVEX\\)" + # All opcodes starting with lower-case 'v' or with (v1) superscript + # accepts VEX prefix + vexok_opcode_expr = "^v.*" + vexok_expr = "\\(v1\\)" + # All opcodes with (v) superscript supports *only* VEX prefix + vexonly_expr = "\\(v\\)" prefix_expr = "\\(Prefix\\)" prefix_num["Operand-Size"] = "INAT_PFX_OPNDSZ" @@ -85,8 +90,8 @@ BEGIN { prefix_num["SEG=GS"] = "INAT_PFX_GS" prefix_num["SEG=SS"] = "INAT_PFX_SS" prefix_num["Address-Size"] = "INAT_PFX_ADDRSZ" - prefix_num["2bytes-VEX"] = "INAT_PFX_VEX2" - prefix_num["3bytes-VEX"] = "INAT_PFX_VEX3" + prefix_num["VEX+1byte"] = "INAT_PFX_VEX2" + prefix_num["VEX+2byte"] = "INAT_PFX_VEX3" clear_vars() } @@ -310,12 +315,10 @@ function convert_operands(count,opnd, i,j,imm,mod) if (match(opcode, fpu_expr)) flags = add_flags(flags, "INAT_MODRM") - # check VEX only code + # check VEX codes if (match(ext, vexonly_expr)) flags = add_flags(flags, "INAT_VEXOK | INAT_VEXONLY") - - # check VEX only code - if (match(ext, vexok_expr)) + else if (match(ext, vexok_expr) || match(opcode, vexok_opcode_expr)) flags = add_flags(flags, "INAT_VEXOK") # check prefixes diff --git a/arch/x86/tools/insn_sanity.c b/arch/x86/tools/insn_sanity.c new file mode 100644 index 000000000000..cc2f8c131286 --- /dev/null +++ b/arch/x86/tools/insn_sanity.c @@ -0,0 +1,275 @@ +/* + * x86 decoder sanity test - based on test_get_insn.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2009 + * Copyright (C) Hitachi, Ltd., 2011 + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include <assert.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> + +#define unlikely(cond) (cond) +#define ARRAY_SIZE(a) (sizeof(a)/sizeof(a[0])) + +#include <asm/insn.h> +#include <inat.c> +#include <insn.c> + +/* + * Test of instruction analysis against tampering. + * Feed random binary to instruction decoder and ensure not to + * access out-of-instruction-buffer. + */ + +#define DEFAULT_MAX_ITER 10000 +#define INSN_NOP 0x90 + +static const char *prog; /* Program name */ +static int verbose; /* Verbosity */ +static int x86_64; /* x86-64 bit mode flag */ +static unsigned int seed; /* Random seed */ +static unsigned long iter_start; /* Start of iteration number */ +static unsigned long iter_end = DEFAULT_MAX_ITER; /* End of iteration number */ +static FILE *input_file; /* Input file name */ + +static void usage(const char *err) +{ + if (err) + fprintf(stderr, "Error: %s\n\n", err); + fprintf(stderr, "Usage: %s [-y|-n|-v] [-s seed[,no]] [-m max] [-i input]\n", prog); + fprintf(stderr, "\t-y 64bit mode\n"); + fprintf(stderr, "\t-n 32bit mode\n"); + fprintf(stderr, "\t-v Verbosity(-vv dumps any decoded result)\n"); + fprintf(stderr, "\t-s Give a random seed (and iteration number)\n"); + fprintf(stderr, "\t-m Give a maximum iteration number\n"); + fprintf(stderr, "\t-i Give an input file with decoded binary\n"); + exit(1); +} + +static void dump_field(FILE *fp, const char *name, const char *indent, + struct insn_field *field) +{ + fprintf(fp, "%s.%s = {\n", indent, name); + fprintf(fp, "%s\t.value = %d, bytes[] = {%x, %x, %x, %x},\n", + indent, field->value, field->bytes[0], field->bytes[1], + field->bytes[2], field->bytes[3]); + fprintf(fp, "%s\t.got = %d, .nbytes = %d},\n", indent, + field->got, field->nbytes); +} + +static void dump_insn(FILE *fp, struct insn *insn) +{ + fprintf(fp, "Instruction = {\n"); + dump_field(fp, "prefixes", "\t", &insn->prefixes); + dump_field(fp, "rex_prefix", "\t", &insn->rex_prefix); + dump_field(fp, "vex_prefix", "\t", &insn->vex_prefix); + dump_field(fp, "opcode", "\t", &insn->opcode); + dump_field(fp, "modrm", "\t", &insn->modrm); + dump_field(fp, "sib", "\t", &insn->sib); + dump_field(fp, "displacement", "\t", &insn->displacement); + dump_field(fp, "immediate1", "\t", &insn->immediate1); + dump_field(fp, "immediate2", "\t", &insn->immediate2); + fprintf(fp, "\t.attr = %x, .opnd_bytes = %d, .addr_bytes = %d,\n", + insn->attr, insn->opnd_bytes, insn->addr_bytes); + fprintf(fp, "\t.length = %d, .x86_64 = %d, .kaddr = %p}\n", + insn->length, insn->x86_64, insn->kaddr); +} + +static void dump_stream(FILE *fp, const char *msg, unsigned long nr_iter, + unsigned char *insn_buf, struct insn *insn) +{ + int i; + + fprintf(fp, "%s:\n", msg); + + dump_insn(fp, insn); + + fprintf(fp, "You can reproduce this with below command(s);\n"); + + /* Input a decoded instruction sequence directly */ + fprintf(fp, " $ echo "); + for (i = 0; i < MAX_INSN_SIZE; i++) + fprintf(fp, " %02x", insn_buf[i]); + fprintf(fp, " | %s -i -\n", prog); + + if (!input_file) { + fprintf(fp, "Or \n"); + /* Give a seed and iteration number */ + fprintf(fp, " $ %s -s 0x%x,%lu\n", prog, seed, nr_iter); + } +} + +static void init_random_seed(void) +{ + int fd; + + fd = open("/dev/urandom", O_RDONLY); + if (fd < 0) + goto fail; + + if (read(fd, &seed, sizeof(seed)) != sizeof(seed)) + goto fail; + + close(fd); + return; +fail: + usage("Failed to open /dev/urandom"); +} + +/* Read given instruction sequence from the input file */ +static int read_next_insn(unsigned char *insn_buf) +{ + char buf[256] = "", *tmp; + int i; + + tmp = fgets(buf, ARRAY_SIZE(buf), input_file); + if (tmp == NULL || feof(input_file)) + return 0; + + for (i = 0; i < MAX_INSN_SIZE; i++) { + insn_buf[i] = (unsigned char)strtoul(tmp, &tmp, 16); + if (*tmp != ' ') + break; + } + + return i; +} + +static int generate_insn(unsigned char *insn_buf) +{ + int i; + + if (input_file) + return read_next_insn(insn_buf); + + /* Fills buffer with random binary up to MAX_INSN_SIZE */ + for (i = 0; i < MAX_INSN_SIZE - 1; i += 2) + *(unsigned short *)(&insn_buf[i]) = random() & 0xffff; + + while (i < MAX_INSN_SIZE) + insn_buf[i++] = random() & 0xff; + + return i; +} + +static void parse_args(int argc, char **argv) +{ + int c; + char *tmp = NULL; + int set_seed = 0; + + prog = argv[0]; + while ((c = getopt(argc, argv, "ynvs:m:i:")) != -1) { + switch (c) { + case 'y': + x86_64 = 1; + break; + case 'n': + x86_64 = 0; + break; + case 'v': + verbose++; + break; + case 'i': + if (strcmp("-", optarg) == 0) + input_file = stdin; + else + input_file = fopen(optarg, "r"); + if (!input_file) + usage("Failed to open input file"); + break; + case 's': + seed = (unsigned int)strtoul(optarg, &tmp, 0); + if (*tmp == ',') { + optarg = tmp + 1; + iter_start = strtoul(optarg, &tmp, 0); + } + if (*tmp != '\0' || tmp == optarg) + usage("Failed to parse seed"); + set_seed = 1; + break; + case 'm': + iter_end = strtoul(optarg, &tmp, 0); + if (*tmp != '\0' || tmp == optarg) + usage("Failed to parse max_iter"); + break; + default: + usage(NULL); + } + } + + /* Check errors */ + if (iter_end < iter_start) + usage("Max iteration number must be bigger than iter-num"); + + if (set_seed && input_file) + usage("Don't use input file (-i) with random seed (-s)"); + + /* Initialize random seed */ + if (!input_file) { + if (!set_seed) /* No seed is given */ + init_random_seed(); + srand(seed); + } +} + +int main(int argc, char **argv) +{ + struct insn insn; + int insns = 0; + int errors = 0; + unsigned long i; + unsigned char insn_buf[MAX_INSN_SIZE * 2]; + + parse_args(argc, argv); + + /* Prepare stop bytes with NOPs */ + memset(insn_buf + MAX_INSN_SIZE, INSN_NOP, MAX_INSN_SIZE); + + for (i = 0; i < iter_end; i++) { + if (generate_insn(insn_buf) <= 0) + break; + + if (i < iter_start) /* Skip to given iteration number */ + continue; + + /* Decode an instruction */ + insn_init(&insn, insn_buf, x86_64); + insn_get_length(&insn); + + if (insn.next_byte <= insn.kaddr || + insn.kaddr + MAX_INSN_SIZE < insn.next_byte) { + /* Access out-of-range memory */ + dump_stream(stderr, "Error: Found an access violation", i, insn_buf, &insn); + errors++; + } else if (verbose && !insn_complete(&insn)) + dump_stream(stdout, "Info: Found an undecodable input", i, insn_buf, &insn); + else if (verbose >= 2) + dump_insn(stdout, &insn); + insns++; + } + + fprintf(stdout, "%s: decoded and checked %d %s instructions with %d errors (seed:0x%x)\n", (errors) ? "Failure" : "Success", insns, (input_file) ? "given" : "random", errors, seed); + + return errors ? 1 : 0; +} diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 26c731a106af..fdce49c7aff6 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -29,7 +29,8 @@ config XEN_PVHVM config XEN_MAX_DOMAIN_MEMORY int - default 128 + default 500 if X86_64 + default 64 if X86_32 depends on XEN help This only affects the sizing of some bss arrays, the unused @@ -48,3 +49,4 @@ config XEN_DEBUG_FS help Enable statistics output and various tuning options in debugfs. Enabling this option may incur a significant performance overhead. + diff --git a/arch/x86/xen/debugfs.c b/arch/x86/xen/debugfs.c index 7c0fedd98ea0..ef1db1900d86 100644 --- a/arch/x86/xen/debugfs.c +++ b/arch/x86/xen/debugfs.c @@ -109,7 +109,7 @@ static const struct file_operations u32_array_fops = { .llseek = no_llseek, }; -struct dentry *xen_debugfs_create_u32_array(const char *name, mode_t mode, +struct dentry *xen_debugfs_create_u32_array(const char *name, umode_t mode, struct dentry *parent, u32 *array, unsigned elements) { diff --git a/arch/x86/xen/debugfs.h b/arch/x86/xen/debugfs.h index e28132084832..78d25499be5b 100644 --- a/arch/x86/xen/debugfs.h +++ b/arch/x86/xen/debugfs.h @@ -3,7 +3,7 @@ struct dentry * __init xen_init_debugfs(void); -struct dentry *xen_debugfs_create_u32_array(const char *name, mode_t mode, +struct dentry *xen_debugfs_create_u32_array(const char *name, umode_t mode, struct dentry *parent, u32 *array, unsigned elements); diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 1f928659c338..12eb07bfb267 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1215,8 +1215,6 @@ asmlinkage void __init xen_start_kernel(void) local_irq_disable(); early_boot_irqs_disabled = true; - memblock_init(); - xen_raw_console_write("mapping kernel into physical memory\n"); pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages); xen_ident_map_ISA(); diff --git a/arch/x86/xen/grant-table.c b/arch/x86/xen/grant-table.c index 5a40d24ba331..3a5f55d51907 100644 --- a/arch/x86/xen/grant-table.c +++ b/arch/x86/xen/grant-table.c @@ -54,6 +54,20 @@ static int map_pte_fn(pte_t *pte, struct page *pmd_page, return 0; } +/* + * This function is used to map shared frames to store grant status. It is + * different from map_pte_fn above, the frames type here is uint64_t. + */ +static int map_pte_fn_status(pte_t *pte, struct page *pmd_page, + unsigned long addr, void *data) +{ + uint64_t **frames = (uint64_t **)data; + + set_pte_at(&init_mm, addr, pte, mfn_pte((*frames)[0], PAGE_KERNEL)); + (*frames)++; + return 0; +} + static int unmap_pte_fn(pte_t *pte, struct page *pmd_page, unsigned long addr, void *data) { @@ -64,10 +78,10 @@ static int unmap_pte_fn(pte_t *pte, struct page *pmd_page, int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes, unsigned long max_nr_gframes, - struct grant_entry **__shared) + void **__shared) { int rc; - struct grant_entry *shared = *__shared; + void *shared = *__shared; if (shared == NULL) { struct vm_struct *area = @@ -83,8 +97,30 @@ int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes, return rc; } -void arch_gnttab_unmap_shared(struct grant_entry *shared, - unsigned long nr_gframes) +int arch_gnttab_map_status(uint64_t *frames, unsigned long nr_gframes, + unsigned long max_nr_gframes, + grant_status_t **__shared) +{ + int rc; + grant_status_t *shared = *__shared; + + if (shared == NULL) { + /* No need to pass in PTE as we are going to do it + * in apply_to_page_range anyhow. */ + struct vm_struct *area = + alloc_vm_area(PAGE_SIZE * max_nr_gframes, NULL); + BUG_ON(area == NULL); + shared = area->addr; + *__shared = shared; + } + + rc = apply_to_page_range(&init_mm, (unsigned long)shared, + PAGE_SIZE * nr_gframes, + map_pte_fn_status, &frames); + return rc; +} + +void arch_gnttab_unmap(void *shared, unsigned long nr_gframes) { apply_to_page_range(&init_mm, (unsigned long)shared, PAGE_SIZE * nr_gframes, unmap_pte_fn, NULL); diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 87f6673b1207..58a0e46c404d 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1774,10 +1774,8 @@ pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd, __xen_write_cr3(true, __pa(pgd)); xen_mc_issue(PARAVIRT_LAZY_CPU); - memblock_x86_reserve_range(__pa(xen_start_info->pt_base), - __pa(xen_start_info->pt_base + - xen_start_info->nr_pt_frames * PAGE_SIZE), - "XEN PAGETABLES"); + memblock_reserve(__pa(xen_start_info->pt_base), + xen_start_info->nr_pt_frames * PAGE_SIZE); return pgd; } @@ -1853,10 +1851,8 @@ pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd, PFN_DOWN(__pa(initial_page_table))); xen_write_cr3(__pa(initial_page_table)); - memblock_x86_reserve_range(__pa(xen_start_info->pt_base), - __pa(xen_start_info->pt_base + - xen_start_info->nr_pt_frames * PAGE_SIZE), - "XEN PAGETABLES"); + memblock_reserve(__pa(xen_start_info->pt_base), + xen_start_info->nr_pt_frames * PAGE_SIZE); return initial_page_table; } diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 38d0af4fefec..e03c63692176 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -75,7 +75,7 @@ static void __init xen_add_extra_mem(u64 start, u64 size) if (i == XEN_EXTRA_MEM_MAX_REGIONS) printk(KERN_WARNING "Warning: not enough extra memory regions\n"); - memblock_x86_reserve_range(start, start + size, "XEN EXTRA"); + memblock_reserve(start, size); xen_max_p2m_pfn = PFN_DOWN(start + size); @@ -173,9 +173,21 @@ static unsigned long __init xen_get_max_pages(void) domid_t domid = DOMID_SELF; int ret; - ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid); - if (ret > 0) - max_pages = ret; + /* + * For the initial domain we use the maximum reservation as + * the maximum page. + * + * For guest domains the current maximum reservation reflects + * the current maximum rather than the static maximum. In this + * case the e820 map provided to us will cover the static + * maximum region. + */ + if (xen_initial_domain()) { + ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid); + if (ret > 0) + max_pages = ret; + } + return min(max_pages, MAX_DOMAIN_PAGES); } @@ -299,9 +311,8 @@ char * __init xen_memory_setup(void) * - xen_start_info * See comment above "struct start_info" in <xen/interface/xen.h> */ - memblock_x86_reserve_range(__pa(xen_start_info->mfn_list), - __pa(xen_start_info->pt_base), - "XEN START INFO"); + memblock_reserve(__pa(xen_start_info->mfn_list), + xen_start_info->pt_base - xen_start_info->mfn_list); sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); @@ -410,6 +421,6 @@ void __init xen_arch_setup(void) #endif disable_cpuidle(); boot_option_idle_override = IDLE_HALT; - + WARN_ON(set_pm_idle_to_default()); fiddle_vdso(); } diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index c346ccdce0df..8a3f8351f438 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -9,6 +9,7 @@ config XTENSA select HAVE_IDE select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW + select GENERIC_CPU_DEVICES help Xtensa processors are 32-bit RISC machines designed by Tensilica primarily for embedded systems. These processors are both diff --git a/arch/xtensa/include/asm/pci.h b/arch/xtensa/include/asm/pci.h index 4609b0f15f1f..05244f07dd31 100644 --- a/arch/xtensa/include/asm/pci.h +++ b/arch/xtensa/include/asm/pci.h @@ -22,11 +22,6 @@ extern struct pci_controller* pcibios_alloc_controller(void); -static inline void pcibios_set_master(struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} - static inline void pcibios_penalize_isa_irq(int irq) { /* We don't do dynamic PCI IRQ allocation */ diff --git a/arch/xtensa/include/asm/socket.h b/arch/xtensa/include/asm/socket.h index cbdf2ffaacff..bb06968be227 100644 --- a/arch/xtensa/include/asm/socket.h +++ b/arch/xtensa/include/asm/socket.h @@ -73,4 +73,7 @@ #define SO_RXQ_OVFL 40 +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS + #endif /* _XTENSA_SOCKET_H */ diff --git a/arch/xtensa/include/asm/thread_info.h b/arch/xtensa/include/asm/thread_info.h index 7be8accb0b0c..6abbedd09d85 100644 --- a/arch/xtensa/include/asm/thread_info.h +++ b/arch/xtensa/include/asm/thread_info.h @@ -132,7 +132,6 @@ static inline struct thread_info *current_thread_info(void) #define TIF_MEMDIE 5 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 6 /* restore signal mask in do_signal() */ #define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_FREEZE 17 /* is freezing for suspend */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_SIGPENDING (1<<TIF_SIGPENDING) @@ -141,7 +140,6 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_IRET (1<<TIF_IRET) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) #define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) -#define _TIF_FREEZE (1<<TIF_FREEZE) #define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ #define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */ diff --git a/arch/xtensa/include/asm/types.h b/arch/xtensa/include/asm/types.h index b1c981e39b52..6d4db7e8ffac 100644 --- a/arch/xtensa/include/asm/types.h +++ b/arch/xtensa/include/asm/types.h @@ -23,8 +23,6 @@ #ifndef __ASSEMBLY__ -typedef unsigned short umode_t; - /* * These aren't exported outside the kernel to avoid name space clashes */ diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c index cd1026931203..61045c192e88 100644 --- a/arch/xtensa/kernel/pci.c +++ b/arch/xtensa/kernel/pci.c @@ -134,9 +134,46 @@ struct pci_controller * __init pcibios_alloc_controller(void) return pci_ctrl; } +static void __init pci_controller_apertures(struct pci_controller *pci_ctrl, + struct list_head *resources) +{ + struct resource *res; + unsigned long io_offset; + int i; + + io_offset = (unsigned long)pci_ctrl->io_space.base; + res = &pci_ctrl->io_resource; + if (!res->flags) { + if (io_offset) + printk (KERN_ERR "I/O resource not set for host" + " bridge %d\n", pci_ctrl->index); + res->start = 0; + res->end = IO_SPACE_LIMIT; + res->flags = IORESOURCE_IO; + } + res->start += io_offset; + res->end += io_offset; + pci_add_resource(resources, res); + + for (i = 0; i < 3; i++) { + res = &pci_ctrl->mem_resources[i]; + if (!res->flags) { + if (i > 0) + continue; + printk(KERN_ERR "Memory resource not set for " + "host bridge %d\n", pci_ctrl->index); + res->start = 0; + res->end = ~0U; + res->flags = IORESOURCE_MEM; + } + pci_add_resource(resources, res); + } +} + static int __init pcibios_init(void) { struct pci_controller *pci_ctrl; + struct list_head resources; struct pci_bus *bus; int next_busno = 0, i; @@ -145,19 +182,10 @@ static int __init pcibios_init(void) /* Scan all of the recorded PCI controllers. */ for (pci_ctrl = pci_ctrl_head; pci_ctrl; pci_ctrl = pci_ctrl->next) { pci_ctrl->last_busno = 0xff; - bus = pci_scan_bus(pci_ctrl->first_busno, pci_ctrl->ops, - pci_ctrl); - if (pci_ctrl->io_resource.flags) { - unsigned long offs; - - offs = (unsigned long)pci_ctrl->io_space.base; - pci_ctrl->io_resource.start += offs; - pci_ctrl->io_resource.end += offs; - bus->resource[0] = &pci_ctrl->io_resource; - } - for (i = 0; i < 3; ++i) - if (pci_ctrl->mem_resources[i].flags) - bus->resource[i+1] =&pci_ctrl->mem_resources[i]; + INIT_LIST_HEAD(&resources); + pci_controller_apertures(pci_ctrl, &resources); + bus = pci_scan_root_bus(NULL, pci_ctrl->first_busno, + pci_ctrl->ops, pci_ctrl, &resources); pci_ctrl->bus = bus; pci_ctrl->last_busno = bus->subordinate; if (next_busno <= pci_ctrl->last_busno) @@ -178,36 +206,7 @@ void __init pcibios_fixup_bus(struct pci_bus *bus) int i; io_offset = (unsigned long)pci_ctrl->io_space.base; - if (bus->parent == NULL) { - /* this is a host bridge - fill in its resources */ - pci_ctrl->bus = bus; - - bus->resource[0] = res = &pci_ctrl->io_resource; - if (!res->flags) { - if (io_offset) - printk (KERN_ERR "I/O resource not set for host" - " bridge %d\n", pci_ctrl->index); - res->start = 0; - res->end = IO_SPACE_LIMIT; - res->flags = IORESOURCE_IO; - } - res->start += io_offset; - res->end += io_offset; - - for (i = 0; i < 3; i++) { - res = &pci_ctrl->mem_resources[i]; - if (!res->flags) { - if (i > 0) - continue; - printk(KERN_ERR "Memory resource not set for " - "host bridge %d\n", pci_ctrl->index); - res->start = 0; - res->end = ~0U; - res->flags = IORESOURCE_MEM; - } - bus->resource[i+1] = res; - } - } else { + if (bus->parent) { /* This is a subordinate bridge */ pci_read_bridge_bases(bus); @@ -227,6 +226,11 @@ char __init *pcibios_setup(char *str) return str; } +void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} + /* the next one is stolen from the alpha port... */ void __init diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index f3e5eb43f71c..ac62f9cf1e10 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -41,14 +41,6 @@ static struct clocksource ccount_clocksource = { .rating = 200, .read = ccount_read, .mask = CLOCKSOURCE_MASK(32), - /* - * With a shift of 22 the lower limit of the cpu clock is - * 1MHz, where NSEC_PER_CCOUNT is 1000 or a bit less than - * 2^10: Since we have 32 bits and the multiplicator can - * already take up as much as 10 bits, this leaves us with - * remaining upper 22 bits. - */ - .shift = 22, }; static irqreturn_t timer_interrupt(int irq, void *dev_id); @@ -66,10 +58,7 @@ void __init time_init(void) printk("%d.%02d MHz\n", (int)ccount_per_jiffy/(1000000/HZ), (int)(ccount_per_jiffy/(10000/HZ))%100); #endif - ccount_clocksource.mult = - clocksource_hz2mult(CCOUNT_PER_JIFFY * HZ, - ccount_clocksource.shift); - clocksource_register(&ccount_clocksource); + clocksource_register_hz(&ccount_clocksource, CCOUNT_PER_JIFFY * HZ); /* Initialize the linux timer interrupt. */ |