diff options
Diffstat (limited to 'arch/tile')
290 files changed, 0 insertions, 69357 deletions
diff --git a/arch/tile/Kbuild b/arch/tile/Kbuild deleted file mode 100644 index a9b922716092..000000000000 --- a/arch/tile/Kbuild +++ /dev/null @@ -1,3 +0,0 @@ - -obj-y += kernel/ -obj-y += mm/ diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig deleted file mode 100644 index ef9d403cbbe4..000000000000 --- a/arch/tile/Kconfig +++ /dev/null @@ -1,481 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. - -config TILE - def_bool y - select ARCH_HAS_DEVMEM_IS_ALLOWED - select ARCH_HAVE_NMI_SAFE_CMPXCHG - select ARCH_WANT_FRAME_POINTERS - select CC_OPTIMIZE_FOR_SIZE - select EDAC_SUPPORT - select GENERIC_CLOCKEVENTS - select GENERIC_FIND_FIRST_BIT - select GENERIC_IRQ_PROBE - select GENERIC_IRQ_SHOW - select GENERIC_PENDING_IRQ if SMP - select GENERIC_STRNCPY_FROM_USER - select GENERIC_STRNLEN_USER - select HAVE_ARCH_SECCOMP_FILTER - select HAVE_ARCH_TRACEHOOK - select HAVE_CONTEXT_TRACKING - select HAVE_DEBUG_BUGVERBOSE - select HAVE_DEBUG_KMEMLEAK - select HAVE_DEBUG_STACKOVERFLOW - select HAVE_DMA_API_DEBUG - select HAVE_EXIT_THREAD - select HAVE_KVM if !TILEGX - select HAVE_NMI if USE_PMC - select HAVE_PERF_EVENTS - select HAVE_SYSCALL_TRACEPOINTS - select MODULES_USE_ELF_RELA - select SYSCTL_EXCEPTION_TRACE - select SYS_HYPERVISOR - select USER_STACKTRACE_SUPPORT - select USE_PMC if PERF_EVENTS - select VIRT_TO_BUS - -config MMU - def_bool y - -config GENERIC_CSUM - def_bool y - -config HAVE_ARCH_ALLOC_REMAP - def_bool y - -config HAVE_SETUP_PER_CPU_AREA - def_bool y - -config NEED_PER_CPU_PAGE_FIRST_CHUNK - def_bool y - -config SYS_SUPPORTS_HUGETLBFS - def_bool y - -# Support for additional huge page sizes besides HPAGE_SIZE. -# The software support is currently only present in the TILE-Gx -# hypervisor. TILEPro in any case does not support page sizes -# larger than the default HPAGE_SIZE. -config HUGETLB_SUPER_PAGES - depends on HUGETLB_PAGE && TILEGX - def_bool y - -config GENERIC_TIME_VSYSCALL - def_bool y - -# Enable PMC if PERF_EVENTS, OPROFILE, or WATCHPOINTS are enabled. -config USE_PMC - bool - -# FIXME: tilegx can implement a more efficient rwsem. -config RWSEM_GENERIC_SPINLOCK - def_bool y - -# We only support gcc 4.4 and above, so this should work. -config ARCH_SUPPORTS_OPTIMIZED_INLINING - def_bool y - -config ARCH_PHYS_ADDR_T_64BIT - def_bool y - -config ARCH_DMA_ADDR_T_64BIT - def_bool y - -config NEED_DMA_MAP_STATE - def_bool y - -config ARCH_HAS_DMA_SET_COHERENT_MASK - bool - -config LOCKDEP_SUPPORT - def_bool y - -config STACKTRACE_SUPPORT - def_bool y - select STACKTRACE - -# We use discontigmem for now; at some point we may want to switch -# to sparsemem (Tilera bug 7996). -config ARCH_DISCONTIGMEM_ENABLE - def_bool y - -config ARCH_DISCONTIGMEM_DEFAULT - def_bool y - -config TRACE_IRQFLAGS_SUPPORT - def_bool y - -# SMP is required for Tilera Linux. -config SMP - def_bool y - -config HVC_TILE - depends on TTY - select HVC_DRIVER - select HVC_IRQ if TILEGX - def_bool y - -# Building with ARCH=tilegx (or ARCH=tile) implies using the -# 64-bit TILE-Gx toolchain, so force CONFIG_TILEGX on. -config TILEGX - def_bool ARCH != "tilepro" - select ARCH_SUPPORTS_ATOMIC_RMW - select GENERIC_IRQ_LEGACY_ALLOC_HWIRQ - select HAVE_ARCH_JUMP_LABEL - select HAVE_ARCH_KGDB - select HAVE_DYNAMIC_FTRACE - select HAVE_FTRACE_MCOUNT_RECORD - select HAVE_FUNCTION_GRAPH_TRACER - select HAVE_FUNCTION_TRACER - select HAVE_KPROBES - select HAVE_KRETPROBES - select SPARSE_IRQ - -config TILEPRO - def_bool !TILEGX - -config 64BIT - def_bool TILEGX - -config ARCH_DEFCONFIG - string - default "arch/tile/configs/tilepro_defconfig" if !TILEGX - default "arch/tile/configs/tilegx_defconfig" if TILEGX - -config PGTABLE_LEVELS - int - default 3 if 64BIT - default 2 - -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - -menu "Tilera-specific configuration" - -config NR_CPUS - int "Maximum number of tiles (2-255)" - range 2 255 - depends on SMP - default "64" - ---help--- - Building with 64 is the recommended value, but a slightly - smaller kernel memory footprint results from using a smaller - value on chips with fewer tiles. - -choice - prompt "Kernel page size" - default PAGE_SIZE_64KB - help - This lets you select the page size of the kernel. For best - performance on memory-intensive applications, a page size of 64KB - is recommended. For workloads involving many small files, many - connections, etc., it may be better to select 16KB, which uses - memory more efficiently at some cost in TLB performance. - - Note that for TILEPro, you must also rebuild the hypervisor - with a matching page size. - -config PAGE_SIZE_4KB - bool "4KB" if TILEPRO - -config PAGE_SIZE_16KB - bool "16KB" - -config PAGE_SIZE_64KB - bool "64KB" - -endchoice - -source "kernel/Kconfig.hz" - -config KEXEC - bool "kexec system call" - select KEXEC_CORE - ---help--- - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is independent of the system firmware. It is used - to implement the "mboot" Tilera booter. - - The name comes from the similarity to the exec system call. - -config COMPAT - bool "Support 32-bit TILE-Gx binaries in addition to 64-bit" - depends on TILEGX - select COMPAT_BINFMT_ELF - default y - ---help--- - If enabled, the kernel will support running TILE-Gx binaries - that were built with the -m32 option. - -config SECCOMP - bool "Enable seccomp to safely compute untrusted bytecode" - depends on PROC_FS - help - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via prctl, it cannot be disabled and the task is only - allowed to execute a few safe syscalls defined by each seccomp - mode. - - If unsure, say N. - -config SYSVIPC_COMPAT - def_bool y - depends on COMPAT && SYSVIPC - -# We do not currently support disabling HIGHMEM on tilepro. -config HIGHMEM - bool # "Support for more than 512 MB of RAM" - default !TILEGX - ---help--- - Linux can use the full amount of RAM in the system by - default. However, the address space of TILE processors is - only 4 Gigabytes large. That means that, if you have a large - amount of physical memory, not all of it can be "permanently - mapped" by the kernel. The physical memory that's not - permanently mapped is called "high memory". - - If you are compiling a kernel which will never run on a - machine with more than 512 MB total physical RAM, answer - "false" here. This will result in the kernel mapping all of - physical memory into the top 1 GB of virtual memory space. - - If unsure, say "true". - -config ZONE_DMA32 - def_bool y - -config IOMMU_HELPER - bool - -config NEED_SG_DMA_LENGTH - bool - -config SWIOTLB - bool - default TILEGX - select DMA_DIRECT_OPS - select IOMMU_HELPER - select NEED_SG_DMA_LENGTH - select ARCH_HAS_DMA_SET_COHERENT_MASK - -# We do not currently support disabling NUMA. -config NUMA - bool # "NUMA Memory Allocation and Scheduler Support" - depends on SMP && DISCONTIGMEM - default y - ---help--- - NUMA memory allocation is required for TILE processors - unless booting with memory striping enabled in the - hypervisor, or with only a single memory controller. - It is recommended that this option always be enabled. - -config NODES_SHIFT - int "Log base 2 of the max number of memory controllers" - default 2 - depends on NEED_MULTIPLE_NODES - ---help--- - By default, 2, i.e. 2^2 == 4 DDR2 controllers. - In a system with more controllers, this value should be raised. - -choice - depends on !TILEGX - prompt "Memory split" if EXPERT - default VMSPLIT_3G - ---help--- - Select the desired split between kernel and user memory. - - If the address range available to the kernel is less than the - physical memory installed, the remaining memory will be available - as "high memory". Accessing high memory is a little more costly - than low memory, as it needs to be mapped into the kernel first. - Note that increasing the kernel address space limits the range - available to user programs, making the address space there - tighter. Selecting anything other than the default 3G/1G split - will also likely make your kernel incompatible with binary-only - kernel modules. - - If you are not absolutely sure what you are doing, leave this - option alone! - - config VMSPLIT_3_75G - bool "3.75G/0.25G user/kernel split (no kernel networking)" - config VMSPLIT_3_5G - bool "3.5G/0.5G user/kernel split" - config VMSPLIT_3G - bool "3G/1G user/kernel split" - config VMSPLIT_2_75G - bool "2.75G/1.25G user/kernel split (for full 1G low memory)" - config VMSPLIT_2_5G - bool "2.5G/1.5G user/kernel split" - config VMSPLIT_2_25G - bool "2.25G/1.75G user/kernel split" - config VMSPLIT_2G - bool "2G/2G user/kernel split" - config VMSPLIT_1G - bool "1G/3G user/kernel split" -endchoice - -config PAGE_OFFSET - hex - depends on !64BIT - default 0xF0000000 if VMSPLIT_3_75G - default 0xE0000000 if VMSPLIT_3_5G - default 0xB0000000 if VMSPLIT_2_75G - default 0xA0000000 if VMSPLIT_2_5G - default 0x90000000 if VMSPLIT_2_25G - default 0x80000000 if VMSPLIT_2G - default 0x40000000 if VMSPLIT_1G - default 0xC0000000 - -source "mm/Kconfig" - -source "kernel/Kconfig.preempt" - -config CMDLINE_BOOL - bool "Built-in kernel command line" - default n - ---help--- - Allow for specifying boot arguments to the kernel at - build time. On some systems (e.g. embedded ones), it is - necessary or convenient to provide some or all of the - kernel boot arguments with the kernel itself (that is, - to not rely on the boot loader to provide them.) - - To compile command line arguments into the kernel, - set this option to 'Y', then fill in the - the boot arguments in CONFIG_CMDLINE. - - Systems with fully functional boot loaders (e.g. mboot, or - if booting over PCI) should leave this option set to 'N'. - -config CMDLINE - string "Built-in kernel command string" - depends on CMDLINE_BOOL - default "" - ---help--- - Enter arguments here that should be compiled into the kernel - image and used at boot time. If the boot loader provides a - command line at boot time, it is appended to this string to - form the full kernel command line, when the system boots. - - However, you can use the CONFIG_CMDLINE_OVERRIDE option to - change this behavior. - - In most cases, the command line (whether built-in or provided - by the boot loader) should specify the device for the root - file system. - -config CMDLINE_OVERRIDE - bool "Built-in command line overrides boot loader arguments" - default n - depends on CMDLINE_BOOL - ---help--- - Set this option to 'Y' to have the kernel ignore the boot loader - command line, and use ONLY the built-in command line. - - This is used to work around broken boot loaders. This should - be set to 'N' under normal conditions. - -config VMALLOC_RESERVE - hex - default 0x2000000 - -config HARDWALL - bool "Hardwall support to allow access to user dynamic network" - default y - -config KERNEL_PL - int "Processor protection level for kernel" - range 1 2 - default 2 if TILEGX - default 1 if !TILEGX - ---help--- - Since MDE 4.2, the Tilera hypervisor runs the kernel - at PL2 by default. If running under an older hypervisor, - or as a KVM guest, you must run at PL1. (The current - hypervisor may also be recompiled with "make HV_PL=2" to - allow it to run a kernel at PL1, but clients running at PL1 - are not expected to be supported indefinitely.) - - If you're not sure, don't change the default. - -source "arch/tile/gxio/Kconfig" - -endmenu # Tilera-specific configuration - -menu "Bus options" - -config PCI - bool "PCI support" - default y - select PCI_DOMAINS - select GENERIC_PCI_IOMAP - select TILE_GXIO_TRIO if TILEGX - select PCI_MSI if TILEGX - ---help--- - Enable PCI root complex support, so PCIe endpoint devices can - be attached to the Tile chip. Many, but not all, PCI devices - are supported under Tilera's root complex driver. - -config PCI_DOMAINS - bool - -config NO_IOMEM - def_bool !PCI - -config NO_IOPORT_MAP - def_bool !PCI - -config TILE_PCI_IO - bool "PCI I/O space support" - default n - depends on PCI - depends on TILEGX - ---help--- - Enable PCI I/O space support on TILEGx. Since the PCI I/O space - is used by few modern PCIe endpoint devices, its support is disabled - by default to save the TRIO PIO Region resource for other purposes. - -source "drivers/pci/Kconfig" - -config TILE_USB - tristate "Tilera USB host adapter support" - default y - depends on USB - depends on TILEGX - select TILE_GXIO_USB_HOST - ---help--- - Provides USB host adapter support for the built-in EHCI and OHCI - interfaces on TILE-Gx chips. - -endmenu - -menu "Executable file formats" - -source "fs/Kconfig.binfmt" - -endmenu - -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -source "arch/tile/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" - -source "arch/tile/kvm/Kconfig" diff --git a/arch/tile/Kconfig.debug b/arch/tile/Kconfig.debug deleted file mode 100644 index 9f665d1a805f..000000000000 --- a/arch/tile/Kconfig.debug +++ /dev/null @@ -1,26 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" - -source "lib/Kconfig.debug" - -config EARLY_PRINTK - bool "Early printk" if EXPERT && DEBUG_KERNEL - default y - help - Write kernel log output directly via the hypervisor console. - - This is useful for kernel debugging when your machine crashes very - early before the console code is initialized. For normal operation - it is not recommended because it looks ugly and doesn't cooperate - with klogd/syslogd. You should normally N here, - unless you want to debug such a crash. - -config TILE_HVGLUE_TRACE - bool "Provide wrapper functions for hypervisor ABI calls" - default n - help - Provide wrapper functions for the hypervisor ABI calls - defined in arch/tile/kernel/hvglue.S. This allows tracing - mechanisms, etc., to have visibility into those calls. - -endmenu diff --git a/arch/tile/Makefile b/arch/tile/Makefile deleted file mode 100644 index 8fa0befba32b..000000000000 --- a/arch/tile/Makefile +++ /dev/null @@ -1,77 +0,0 @@ -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# This file is included by the global makefile so that you can add your own -# architecture-specific flags and dependencies. Remember to do have actions -# for "archclean" and "archdep" for cleaning up and making dependencies for -# this architecture - -# If building with TILERA_ROOT set (i.e. using the Tilera Multicore -# Development Environment) we can set CROSS_COMPILE based on that. -# If we're not cross-compiling, make sure we're on the right architecture. -# Only bother to test for a few common targets, to avoid useless errors. -ifeq ($(CROSS_COMPILE),) - ifdef TILERA_ROOT - CROSS_COMPILE := $(TILERA_ROOT)/bin/tile- - else - goals := $(if $(MAKECMDGOALS), $(MAKECMDGOALS), all) - ifneq ($(strip $(filter vmlinux modules all,$(goals))),) - HOST_ARCH := $(shell uname -m) - ifneq ($(HOST_ARCH),$(ARCH)) -$(error Set TILERA_ROOT or CROSS_COMPILE when building $(ARCH) on $(HOST_ARCH)) - endif - endif - endif -endif - -# The tile compiler may emit .eh_frame information for backtracing. -# In kernel modules, this causes load failures due to unsupported relocations. -KBUILD_CFLAGS += -fno-asynchronous-unwind-tables - -LIBGCC_PATH := \ - $(shell $(CC) $(KBUILD_CFLAGS) $(KCFLAGS) -print-libgcc-file-name) - -# Provide the path to use for "make defconfig". -# We default to the newer TILE-Gx architecture if only "tile" is given. -ifeq ($(ARCH),tile) - KBUILD_DEFCONFIG := tilegx_defconfig -else - KBUILD_DEFCONFIG := $(ARCH)_defconfig -endif - -# Used as a file extension when useful, e.g. head_$(BITS).o -# Not needed for (e.g.) "$(CC) -m32" since the compiler automatically -# uses the right default anyway. -export BITS -ifeq ($(CONFIG_TILEGX),y) -BITS := 64 -else -BITS := 32 -endif - -CHECKFLAGS += -m$(BITS) - -head-y := arch/tile/kernel/head_$(BITS).o - -libs-y += arch/tile/lib/ -libs-y += $(LIBGCC_PATH) - -# See arch/tile/Kbuild for content of core part of the kernel -core-y += arch/tile/ - -core-$(CONFIG_TILE_GXIO) += arch/tile/gxio/ - -ifdef TILERA_ROOT -INSTALL_PATH ?= $(TILERA_ROOT)/tile/boot -endif - -install: - install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE) - install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE) - install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE) - -define archhelp - echo ' install - install kernel into $(INSTALL_PATH)' -endef diff --git a/arch/tile/configs/tilegx_defconfig b/arch/tile/configs/tilegx_defconfig deleted file mode 100644 index 357a4c271ad4..000000000000 --- a/arch/tile/configs/tilegx_defconfig +++ /dev/null @@ -1,411 +0,0 @@ -CONFIG_TILEGX=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_FHANDLE=y -CONFIG_AUDIT=y -CONFIG_NO_HZ=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_LOG_BUF_SHIFT=19 -CONFIG_CGROUPS=y -CONFIG_CGROUP_DEBUG=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CPUSETS=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_SCHED=y -CONFIG_RT_GROUP_SCHED=y -CONFIG_BLK_CGROUP=y -CONFIG_NAMESPACES=y -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_RD_XZ=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_EMBEDDED=y -# CONFIG_COMPAT_BRK is not set -CONFIG_PROFILING=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_BLK_DEV_INTEGRITY=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_OSF_PARTITION=y -CONFIG_AMIGA_PARTITION=y -CONFIG_MAC_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_SGI_PARTITION=y -CONFIG_SUN_PARTITION=y -CONFIG_KARMA_PARTITION=y -CONFIG_CFQ_GROUP_IOSCHED=y -CONFIG_NR_CPUS=100 -CONFIG_HZ_100=y -# CONFIG_COMPACTION is not set -CONFIG_PREEMPT_VOLUNTARY=y -CONFIG_TILE_PCI_IO=y -CONFIG_PCI_DEBUG=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_XFRM_SUB_POLICY=y -CONFIG_XFRM_STATISTICS=y -CONFIG_NET_KEY=m -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_NET_IPIP=m -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=m -CONFIG_TCP_CONG_ADVANCED=y -CONFIG_TCP_CONG_HSTCP=m -CONFIG_TCP_CONG_HYBLA=m -CONFIG_TCP_CONG_SCALABLE=m -CONFIG_TCP_CONG_LP=m -CONFIG_TCP_CONG_VENO=m -CONFIG_TCP_CONG_YEAH=m -CONFIG_TCP_CONG_ILLINOIS=m -CONFIG_TCP_MD5SIG=y -CONFIG_IPV6=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_IPV6_OPTIMISTIC_DAD=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_MROUTE=y -CONFIG_IPV6_PIMSM_V2=y -CONFIG_NETLABEL=y -CONFIG_RDS=m -CONFIG_RDS_TCP=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_PHONET=m -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_MULTIQ=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_DRR=m -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_CLS_U32_PERF=y -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_FLOW=m -CONFIG_NET_CLS_CGROUP=y -CONFIG_NET_EMATCH=y -CONFIG_NET_EMATCH_CMP=m -CONFIG_NET_EMATCH_NBYTE=m -CONFIG_NET_EMATCH_U32=m -CONFIG_NET_EMATCH_META=m -CONFIG_NET_EMATCH_TEXT=m -CONFIG_NET_CLS_ACT=y -CONFIG_NET_ACT_POLICE=m -CONFIG_NET_ACT_GACT=m -CONFIG_GACT_PROB=y -CONFIG_NET_ACT_MIRRED=m -CONFIG_NET_ACT_NAT=m -CONFIG_NET_ACT_PEDIT=m -CONFIG_NET_ACT_SIMP=m -CONFIG_NET_ACT_SKBEDIT=m -CONFIG_NET_CLS_IND=y -CONFIG_DCB=y -CONFIG_DNS_RESOLVER=y -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_CONNECTOR=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_SX8=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_ATA_OVER_ETH=m -CONFIG_RAID_ATTRS=m -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SAS_ATA=y -CONFIG_ISCSI_TCP=m -CONFIG_SCSI_MVSAS=y -# CONFIG_SCSI_MVSAS_DEBUG is not set -CONFIG_SCSI_MVSAS_TASKLET=y -CONFIG_ATA=y -CONFIG_SATA_AHCI=y -CONFIG_SATA_SIL24=y -# CONFIG_ATA_SFF is not set -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=m -CONFIG_DM_DEBUG=y -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_LOG_USERSPACE=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_QL=m -CONFIG_DM_MULTIPATH_ST=m -CONFIG_DM_DELAY=m -CONFIG_DM_UEVENT=y -CONFIG_TARGET_CORE=m -CONFIG_TCM_IBLOCK=m -CONFIG_TCM_FILEIO=m -CONFIG_TCM_PSCSI=m -CONFIG_LOOPBACK_TARGET=m -CONFIG_ISCSI_TARGET=m -CONFIG_FUSION=y -CONFIG_FUSION_SAS=y -CONFIG_NETDEVICES=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -CONFIG_IFB=m -CONFIG_MACVLAN=m -CONFIG_MACVTAP=m -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_TUN=y -CONFIG_VETH=m -CONFIG_NET_DSA_MV88E6060=y -CONFIG_NET_DSA_MV88E6XXX=y -CONFIG_SKY2=y -CONFIG_PTP_1588_CLOCK_TILEGX=y -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_TILEGX=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_TIMERIOMEM=m -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -# CONFIG_VGA_ARB is not set -CONFIG_DRM=m -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m -CONFIG_DRM_MGA=m -CONFIG_DRM_VIA=m -CONFIG_DRM_SAVAGE=m -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_EDAC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_TILE=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_EXT4_FS=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -CONFIG_XFS_FS=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_GFS2_FS=m -CONFIG_GFS2_FS_LOCKING_DLM=y -CONFIG_BTRFS_FS=m -CONFIG_BTRFS_FS_POSIX_ACL=y -CONFIG_QUOTA=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -# CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_QFMT_V2=y -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=y -CONFIG_CUSE=m -CONFIG_FSCACHE=m -CONFIG_FSCACHE_STATS=y -CONFIG_CACHEFILES=m -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_IOCHARSET="ascii" -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_HUGETLBFS=y -CONFIG_ECRYPT_FS=m -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -CONFIG_NFS_FS=m -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=m -CONFIG_NFS_V4_1=y -CONFIG_NFS_FSCACHE=y -CONFIG_NFSD=m -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_CIFS=m -CONFIG_CIFS_STATS=y -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_CIFS_UPCALL=y -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -CONFIG_CIFS_DFS_UPCALL=y -CONFIG_CIFS_FSCACHE=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -CONFIG_DLM_DEBUG=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_INFO_REDUCED=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -CONFIG_STRIP_ASM_SYMS=y -CONFIG_DEBUG_FS=y -CONFIG_HEADERS_CHECK=y -# CONFIG_FRAME_POINTER is not set -CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y -CONFIG_DEBUG_VM=y -CONFIG_DEBUG_MEMORY_INIT=y -CONFIG_DEBUG_STACKOVERFLOW=y -CONFIG_LOCKUP_DETECTOR=y -CONFIG_SCHEDSTATS=y -CONFIG_TIMER_STATS=y -CONFIG_DEBUG_LIST=y -CONFIG_DEBUG_CREDENTIALS=y -CONFIG_RCU_CPU_STALL_TIMEOUT=60 -CONFIG_ASYNC_RAID6_TEST=m -CONFIG_KGDB=y -CONFIG_SECURITY=y -CONFIG_SECURITYFS=y -CONFIG_SECURITY_NETWORK=y -CONFIG_SECURITY_NETWORK_XFRM=y -CONFIG_SECURITY_SELINUX=y -CONFIG_SECURITY_SELINUX_BOOTPARAM=y -CONFIG_SECURITY_SELINUX_DISABLE=y -CONFIG_CRYPTO_PCRYPT=m -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_CTS=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_VMAC=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_LZO=m diff --git a/arch/tile/configs/tilepro_defconfig b/arch/tile/configs/tilepro_defconfig deleted file mode 100644 index da2858755fa1..000000000000 --- a/arch/tile/configs/tilepro_defconfig +++ /dev/null @@ -1,524 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_AUDIT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_LOG_BUF_SHIFT=19 -CONFIG_CGROUPS=y -CONFIG_CGROUP_DEBUG=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CPUSETS=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_SCHED=y -CONFIG_RT_GROUP_SCHED=y -CONFIG_BLK_CGROUP=y -CONFIG_NAMESPACES=y -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_RD_XZ=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_EMBEDDED=y -# CONFIG_COMPAT_BRK is not set -CONFIG_PROFILING=y -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_BLK_DEV_INTEGRITY=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_OSF_PARTITION=y -CONFIG_AMIGA_PARTITION=y -CONFIG_MAC_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_SGI_PARTITION=y -CONFIG_SUN_PARTITION=y -CONFIG_KARMA_PARTITION=y -CONFIG_CFQ_GROUP_IOSCHED=y -CONFIG_HZ_100=y -# CONFIG_COMPACTION is not set -CONFIG_PREEMPT_VOLUNTARY=y -CONFIG_PCI_DEBUG=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_XFRM_SUB_POLICY=y -CONFIG_XFRM_STATISTICS=y -CONFIG_NET_KEY=m -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_NET_IPIP=m -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=m -CONFIG_TCP_CONG_ADVANCED=y -CONFIG_TCP_CONG_HSTCP=m -CONFIG_TCP_CONG_HYBLA=m -CONFIG_TCP_CONG_SCALABLE=m -CONFIG_TCP_CONG_LP=m -CONFIG_TCP_CONG_VENO=m -CONFIG_TCP_CONG_YEAH=m -CONFIG_TCP_CONG_ILLINOIS=m -CONFIG_TCP_MD5SIG=y -CONFIG_IPV6=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_IPV6_OPTIMISTIC_DAD=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_MROUTE=y -CONFIG_IPV6_PIMSM_V2=y -CONFIG_NETLABEL=y -CONFIG_NETFILTER=y -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_ZONES=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_DCCP=m -CONFIG_NF_CT_PROTO_UDPLITE=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NOTRACK=m -CONFIG_NETFILTER_XT_TARGET_TEE=m -CONFIG_NETFILTER_XT_TARGET_TPROXY=m -CONFIG_NETFILTER_XT_TARGET_TRACE=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m -CONFIG_NETFILTER_XT_MATCH_CLUSTER=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_IPVS=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_OSF=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_SOCKET=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_IP_VS=m -CONFIG_IP_VS_IPV6=y -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y -CONFIG_IP_VS_PROTO_SCTP=y -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m -CONFIG_NF_CONNTRACK_IPV4=m -# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set -CONFIG_IP_NF_IPTABLES=y -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=y -CONFIG_IP_NF_TARGET_REJECT=y -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_SECURITY=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -CONFIG_IP6_NF_SECURITY=m -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_IP6=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_ULOG=m -CONFIG_BRIDGE_EBT_NFLOG=m -CONFIG_RDS=m -CONFIG_RDS_TCP=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_PHONET=m -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_MULTIQ=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_DRR=m -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_CLS_U32_PERF=y -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_FLOW=m -CONFIG_NET_CLS_CGROUP=y -CONFIG_NET_EMATCH=y -CONFIG_NET_EMATCH_CMP=m -CONFIG_NET_EMATCH_NBYTE=m -CONFIG_NET_EMATCH_U32=m -CONFIG_NET_EMATCH_META=m -CONFIG_NET_EMATCH_TEXT=m -CONFIG_NET_CLS_ACT=y -CONFIG_NET_ACT_POLICE=m -CONFIG_NET_ACT_GACT=m -CONFIG_GACT_PROB=y -CONFIG_NET_ACT_MIRRED=m -CONFIG_NET_ACT_IPT=m -CONFIG_NET_ACT_NAT=m -CONFIG_NET_ACT_PEDIT=m -CONFIG_NET_ACT_SIMP=m -CONFIG_NET_ACT_SKBEDIT=m -CONFIG_NET_CLS_IND=y -CONFIG_DCB=y -CONFIG_DNS_RESOLVER=y -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_CONNECTOR=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_SX8=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_ATA_OVER_ETH=m -CONFIG_RAID_ATTRS=m -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_ATA=y -CONFIG_SATA_SIL24=y -# CONFIG_ATA_SFF is not set -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=m -CONFIG_DM_DEBUG=y -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_LOG_USERSPACE=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_QL=m -CONFIG_DM_MULTIPATH_ST=m -CONFIG_DM_DELAY=m -CONFIG_DM_UEVENT=y -CONFIG_FUSION=y -CONFIG_FUSION_SAS=y -CONFIG_NETDEVICES=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -CONFIG_IFB=m -CONFIG_MACVLAN=m -CONFIG_MACVTAP=m -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_TUN=y -CONFIG_VETH=m -CONFIG_NET_DSA_MV88E6060=y -CONFIG_NET_DSA_MV88E6XXX=y -# CONFIG_NET_VENDOR_3COM is not set -CONFIG_E1000E=y -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_TIMERIOMEM=m -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -# CONFIG_VGA_ARB is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EDAC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_TILE=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_EXT4_FS=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -CONFIG_XFS_FS=y -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_GFS2_FS=m -CONFIG_GFS2_FS_LOCKING_DLM=y -CONFIG_BTRFS_FS=m -CONFIG_BTRFS_FS_POSIX_ACL=y -CONFIG_QUOTA=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -# CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_QFMT_V2=y -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=y -CONFIG_CUSE=m -CONFIG_FSCACHE=m -CONFIG_FSCACHE_STATS=y -CONFIG_CACHEFILES=m -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_IOCHARSET="ascii" -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_HUGETLBFS=y -CONFIG_CONFIGFS_FS=m -CONFIG_ECRYPT_FS=m -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -CONFIG_NFS_FS=m -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=m -CONFIG_NFS_V4_1=y -CONFIG_NFS_FSCACHE=y -CONFIG_NFSD=m -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_CIFS=m -CONFIG_CIFS_STATS=y -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_CIFS_UPCALL=y -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -CONFIG_CIFS_DFS_UPCALL=y -CONFIG_CIFS_FSCACHE=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -CONFIG_DLM_DEBUG=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_INFO_REDUCED=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -CONFIG_FRAME_WARN=2048 -CONFIG_STRIP_ASM_SYMS=y -CONFIG_DEBUG_FS=y -CONFIG_HEADERS_CHECK=y -# CONFIG_FRAME_POINTER is not set -CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_VM=y -CONFIG_DEBUG_MEMORY_INIT=y -CONFIG_DEBUG_STACKOVERFLOW=y -CONFIG_LOCKUP_DETECTOR=y -CONFIG_SCHEDSTATS=y -CONFIG_TIMER_STATS=y -CONFIG_DEBUG_LIST=y -CONFIG_DEBUG_CREDENTIALS=y -CONFIG_RCU_CPU_STALL_TIMEOUT=60 -CONFIG_ASYNC_RAID6_TEST=m -CONFIG_SECURITY=y -CONFIG_SECURITYFS=y -CONFIG_SECURITY_NETWORK=y -CONFIG_SECURITY_NETWORK_XFRM=y -CONFIG_SECURITY_SELINUX=y -CONFIG_SECURITY_SELINUX_BOOTPARAM=y -CONFIG_SECURITY_SELINUX_DISABLE=y -CONFIG_CRYPTO_PCRYPT=m -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_CTS=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_VMAC=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_LZO=m -CONFIG_CRC_CCITT=m -CONFIG_CRC7=m diff --git a/arch/tile/gxio/Kconfig b/arch/tile/gxio/Kconfig deleted file mode 100644 index 903c8646bdd7..000000000000 --- a/arch/tile/gxio/Kconfig +++ /dev/null @@ -1,34 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# Support direct access to TILE-Gx hardware from user space, via the -# gxio library, or from kernel space, via kernel IORPC support. -config TILE_GXIO - bool - depends on TILEGX - -# Support direct access to the common I/O DMA facility within the -# TILE-Gx mPIPE and Trio hardware from kernel space. -config TILE_GXIO_DMA - bool - select TILE_GXIO - -# Support direct access to the TILE-Gx mPIPE hardware from kernel space. -config TILE_GXIO_MPIPE - bool - select TILE_GXIO - select TILE_GXIO_DMA - -# Support direct access to the TILE-Gx TRIO hardware from kernel space. -config TILE_GXIO_TRIO - bool - select TILE_GXIO - select TILE_GXIO_DMA - -# Support direct access to the TILE-Gx USB hardware from kernel space. -config TILE_GXIO_USB_HOST - bool - select TILE_GXIO - -# Support direct access to the TILE-Gx UART hardware from kernel space. -config TILE_GXIO_UART - bool - select TILE_GXIO diff --git a/arch/tile/gxio/Makefile b/arch/tile/gxio/Makefile deleted file mode 100644 index fcc903c4cf87..000000000000 --- a/arch/tile/gxio/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the Tile-Gx device access support. -# - -obj-$(CONFIG_TILE_GXIO) += iorpc_globals.o kiorpc.o -obj-$(CONFIG_TILE_GXIO_DMA) += dma_queue.o -obj-$(CONFIG_TILE_GXIO_MPIPE) += mpipe.o iorpc_mpipe.o iorpc_mpipe_info.o -obj-$(CONFIG_TILE_GXIO_TRIO) += trio.o iorpc_trio.o -obj-$(CONFIG_TILE_GXIO_UART) += uart.o iorpc_uart.o -obj-$(CONFIG_TILE_GXIO_USB_HOST) += usb_host.o iorpc_usb_host.o diff --git a/arch/tile/gxio/dma_queue.c b/arch/tile/gxio/dma_queue.c deleted file mode 100644 index b7ba577d82ca..000000000000 --- a/arch/tile/gxio/dma_queue.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/io.h> -#include <linux/atomic.h> -#include <linux/module.h> -#include <gxio/dma_queue.h> - -/* Wait for a memory read to complete. */ -#define wait_for_value(val) \ - __asm__ __volatile__("move %0, %0" :: "r"(val)) - -/* The index is in the low 16. */ -#define DMA_QUEUE_INDEX_MASK ((1 << 16) - 1) - -/* - * The hardware descriptor-ring type. - * This matches the types used by mpipe (MPIPE_EDMA_POST_REGION_VAL_t) - * and trio (TRIO_PUSH_DMA_REGION_VAL_t or TRIO_PULL_DMA_REGION_VAL_t). - * See those types for more documentation on the individual fields. - */ -typedef union { - struct { -#ifndef __BIG_ENDIAN__ - uint64_t ring_idx:16; - uint64_t count:16; - uint64_t gen:1; - uint64_t __reserved:31; -#else - uint64_t __reserved:31; - uint64_t gen:1; - uint64_t count:16; - uint64_t ring_idx:16; -#endif - }; - uint64_t word; -} __gxio_ring_t; - -void __gxio_dma_queue_init(__gxio_dma_queue_t *dma_queue, - void *post_region_addr, unsigned int num_entries) -{ - /* - * Limit 65536 entry rings to 65535 credits because we only have a - * 16 bit completion counter. - */ - int64_t credits = (num_entries < 65536) ? num_entries : 65535; - - memset(dma_queue, 0, sizeof(*dma_queue)); - - dma_queue->post_region_addr = post_region_addr; - dma_queue->hw_complete_count = 0; - dma_queue->credits_and_next_index = credits << DMA_QUEUE_CREDIT_SHIFT; -} - -EXPORT_SYMBOL_GPL(__gxio_dma_queue_init); - -void __gxio_dma_queue_update_credits(__gxio_dma_queue_t *dma_queue) -{ - __gxio_ring_t val; - uint64_t count; - uint64_t delta; - uint64_t new_count; - - /* - * Read the 64-bit completion count without touching the cache, so - * we later avoid having to evict any sharers of this cache line - * when we update it below. - */ - uint64_t orig_hw_complete_count = - cmpxchg(&dma_queue->hw_complete_count, - -1, -1); - - /* Make sure the load completes before we access the hardware. */ - wait_for_value(orig_hw_complete_count); - - /* Read the 16-bit count of how many packets it has completed. */ - val.word = __gxio_mmio_read(dma_queue->post_region_addr); - count = val.count; - - /* - * Calculate the number of completions since we last updated the - * 64-bit counter. It's safe to ignore the high bits because the - * maximum credit value is 65535. - */ - delta = (count - orig_hw_complete_count) & 0xffff; - if (delta == 0) - return; - - /* - * Try to write back the count, advanced by delta. If we race with - * another thread, this might fail, in which case we return - * immediately on the assumption that some credits are (or at least - * were) available. - */ - new_count = orig_hw_complete_count + delta; - if (cmpxchg(&dma_queue->hw_complete_count, - orig_hw_complete_count, - new_count) != orig_hw_complete_count) - return; - - /* - * We succeeded in advancing the completion count; add back the - * corresponding number of egress credits. - */ - __insn_fetchadd(&dma_queue->credits_and_next_index, - (delta << DMA_QUEUE_CREDIT_SHIFT)); -} - -EXPORT_SYMBOL_GPL(__gxio_dma_queue_update_credits); - -/* - * A separate 'blocked' method for put() so that backtraces and - * profiles will clearly indicate that we're wasting time spinning on - * egress availability rather than actually posting commands. - */ -int64_t __gxio_dma_queue_wait_for_credits(__gxio_dma_queue_t *dma_queue, - int64_t modifier) -{ - int backoff = 16; - int64_t old; - - do { - int i; - /* Back off to avoid spamming memory networks. */ - for (i = backoff; i > 0; i--) - __insn_mfspr(SPR_PASS); - - /* Check credits again. */ - __gxio_dma_queue_update_credits(dma_queue); - old = __insn_fetchaddgez(&dma_queue->credits_and_next_index, - modifier); - - /* Calculate bounded exponential backoff for next iteration. */ - if (backoff < 256) - backoff *= 2; - } while (old + modifier < 0); - - return old; -} - -EXPORT_SYMBOL_GPL(__gxio_dma_queue_wait_for_credits); - -int64_t __gxio_dma_queue_reserve_aux(__gxio_dma_queue_t *dma_queue, - unsigned int num, int wait) -{ - return __gxio_dma_queue_reserve(dma_queue, num, wait != 0, true); -} - -EXPORT_SYMBOL_GPL(__gxio_dma_queue_reserve_aux); - -int __gxio_dma_queue_is_complete(__gxio_dma_queue_t *dma_queue, - int64_t completion_slot, int update) -{ - if (update) { - if (READ_ONCE(dma_queue->hw_complete_count) > - completion_slot) - return 1; - - __gxio_dma_queue_update_credits(dma_queue); - } - - return READ_ONCE(dma_queue->hw_complete_count) > completion_slot; -} - -EXPORT_SYMBOL_GPL(__gxio_dma_queue_is_complete); diff --git a/arch/tile/gxio/iorpc_globals.c b/arch/tile/gxio/iorpc_globals.c deleted file mode 100644 index e178e90805a2..000000000000 --- a/arch/tile/gxio/iorpc_globals.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* This file is machine-generated; DO NOT EDIT! */ -#include "gxio/iorpc_globals.h" - -struct arm_pollfd_param { - union iorpc_pollfd pollfd; -}; - -int __iorpc_arm_pollfd(int fd, int pollfd_cookie) -{ - struct arm_pollfd_param temp; - struct arm_pollfd_param *params = &temp; - - params->pollfd.kernel.cookie = pollfd_cookie; - - return hv_dev_pwrite(fd, 0, (HV_VirtAddr) params, sizeof(*params), - IORPC_OP_ARM_POLLFD); -} - -EXPORT_SYMBOL(__iorpc_arm_pollfd); - -struct close_pollfd_param { - union iorpc_pollfd pollfd; -}; - -int __iorpc_close_pollfd(int fd, int pollfd_cookie) -{ - struct close_pollfd_param temp; - struct close_pollfd_param *params = &temp; - - params->pollfd.kernel.cookie = pollfd_cookie; - - return hv_dev_pwrite(fd, 0, (HV_VirtAddr) params, sizeof(*params), - IORPC_OP_CLOSE_POLLFD); -} - -EXPORT_SYMBOL(__iorpc_close_pollfd); - -struct get_mmio_base_param { - HV_PTE base; -}; - -int __iorpc_get_mmio_base(int fd, HV_PTE *base) -{ - int __result; - struct get_mmio_base_param temp; - struct get_mmio_base_param *params = &temp; - - __result = - hv_dev_pread(fd, 0, (HV_VirtAddr) params, sizeof(*params), - IORPC_OP_GET_MMIO_BASE); - *base = params->base; - - return __result; -} - -EXPORT_SYMBOL(__iorpc_get_mmio_base); - -struct check_mmio_offset_param { - unsigned long offset; - unsigned long size; -}; - -int __iorpc_check_mmio_offset(int fd, unsigned long offset, unsigned long size) -{ - struct check_mmio_offset_param temp; - struct check_mmio_offset_param *params = &temp; - - params->offset = offset; - params->size = size; - - return hv_dev_pwrite(fd, 0, (HV_VirtAddr) params, sizeof(*params), - IORPC_OP_CHECK_MMIO_OFFSET); -} - -EXPORT_SYMBOL(__iorpc_check_mmio_offset); diff --git a/arch/tile/gxio/iorpc_mpipe.c b/arch/tile/gxio/iorpc_mpipe.c deleted file mode 100644 index e19325c4c431..000000000000 --- a/arch/tile/gxio/iorpc_mpipe.c +++ /dev/null @@ -1,593 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* This file is machine-generated; DO NOT EDIT! */ -#include "gxio/iorpc_mpipe.h" - -struct alloc_buffer_stacks_param { - unsigned int count; - unsigned int first; - unsigned int flags; -}; - -int gxio_mpipe_alloc_buffer_stacks(gxio_mpipe_context_t *context, - unsigned int count, unsigned int first, - unsigned int flags) -{ - struct alloc_buffer_stacks_param temp; - struct alloc_buffer_stacks_param *params = &temp; - - params->count = count; - params->first = first; - params->flags = flags; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), - GXIO_MPIPE_OP_ALLOC_BUFFER_STACKS); -} - -EXPORT_SYMBOL(gxio_mpipe_alloc_buffer_stacks); - -struct init_buffer_stack_aux_param { - union iorpc_mem_buffer buffer; - unsigned int stack; - unsigned int buffer_size_enum; -}; - -int gxio_mpipe_init_buffer_stack_aux(gxio_mpipe_context_t *context, - void *mem_va, size_t mem_size, - unsigned int mem_flags, unsigned int stack, - unsigned int buffer_size_enum) -{ - int __result; - unsigned long long __cpa; - pte_t __pte; - struct init_buffer_stack_aux_param temp; - struct init_buffer_stack_aux_param *params = &temp; - - __result = va_to_cpa_and_pte(mem_va, &__cpa, &__pte); - if (__result != 0) - return __result; - params->buffer.kernel.cpa = __cpa; - params->buffer.kernel.size = mem_size; - params->buffer.kernel.pte = __pte; - params->buffer.kernel.flags = mem_flags; - params->stack = stack; - params->buffer_size_enum = buffer_size_enum; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), - GXIO_MPIPE_OP_INIT_BUFFER_STACK_AUX); -} - -EXPORT_SYMBOL(gxio_mpipe_init_buffer_stack_aux); - - -struct alloc_notif_rings_param { - unsigned int count; - unsigned int first; - unsigned int flags; -}; - -int gxio_mpipe_alloc_notif_rings(gxio_mpipe_context_t *context, - unsigned int count, unsigned int first, - unsigned int flags) -{ - struct alloc_notif_rings_param temp; - struct alloc_notif_rings_param *params = &temp; - - params->count = count; - params->first = first; - params->flags = flags; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_MPIPE_OP_ALLOC_NOTIF_RINGS); -} - -EXPORT_SYMBOL(gxio_mpipe_alloc_notif_rings); - -struct init_notif_ring_aux_param { - union iorpc_mem_buffer buffer; - unsigned int ring; -}; - -int gxio_mpipe_init_notif_ring_aux(gxio_mpipe_context_t *context, void *mem_va, - size_t mem_size, unsigned int mem_flags, - unsigned int ring) -{ - int __result; - unsigned long long __cpa; - pte_t __pte; - struct init_notif_ring_aux_param temp; - struct init_notif_ring_aux_param *params = &temp; - - __result = va_to_cpa_and_pte(mem_va, &__cpa, &__pte); - if (__result != 0) - return __result; - params->buffer.kernel.cpa = __cpa; - params->buffer.kernel.size = mem_size; - params->buffer.kernel.pte = __pte; - params->buffer.kernel.flags = mem_flags; - params->ring = ring; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), - GXIO_MPIPE_OP_INIT_NOTIF_RING_AUX); -} - -EXPORT_SYMBOL(gxio_mpipe_init_notif_ring_aux); - -struct request_notif_ring_interrupt_param { - union iorpc_interrupt interrupt; - unsigned int ring; -}; - -int gxio_mpipe_request_notif_ring_interrupt(gxio_mpipe_context_t *context, - int inter_x, int inter_y, - int inter_ipi, int inter_event, - unsigned int ring) -{ - struct request_notif_ring_interrupt_param temp; - struct request_notif_ring_interrupt_param *params = &temp; - - params->interrupt.kernel.x = inter_x; - params->interrupt.kernel.y = inter_y; - params->interrupt.kernel.ipi = inter_ipi; - params->interrupt.kernel.event = inter_event; - params->ring = ring; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), - GXIO_MPIPE_OP_REQUEST_NOTIF_RING_INTERRUPT); -} - -EXPORT_SYMBOL(gxio_mpipe_request_notif_ring_interrupt); - -struct enable_notif_ring_interrupt_param { - unsigned int ring; -}; - -int gxio_mpipe_enable_notif_ring_interrupt(gxio_mpipe_context_t *context, - unsigned int ring) -{ - struct enable_notif_ring_interrupt_param temp; - struct enable_notif_ring_interrupt_param *params = &temp; - - params->ring = ring; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), - GXIO_MPIPE_OP_ENABLE_NOTIF_RING_INTERRUPT); -} - -EXPORT_SYMBOL(gxio_mpipe_enable_notif_ring_interrupt); - -struct alloc_notif_groups_param { - unsigned int count; - unsigned int first; - unsigned int flags; -}; - -int gxio_mpipe_alloc_notif_groups(gxio_mpipe_context_t *context, - unsigned int count, unsigned int first, - unsigned int flags) -{ - struct alloc_notif_groups_param temp; - struct alloc_notif_groups_param *params = &temp; - - params->count = count; - params->first = first; - params->flags = flags; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_MPIPE_OP_ALLOC_NOTIF_GROUPS); -} - -EXPORT_SYMBOL(gxio_mpipe_alloc_notif_groups); - -struct init_notif_group_param { - unsigned int group; - gxio_mpipe_notif_group_bits_t bits; -}; - -int gxio_mpipe_init_notif_group(gxio_mpipe_context_t *context, - unsigned int group, - gxio_mpipe_notif_group_bits_t bits) -{ - struct init_notif_group_param temp; - struct init_notif_group_param *params = &temp; - - params->group = group; - params->bits = bits; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_MPIPE_OP_INIT_NOTIF_GROUP); -} - -EXPORT_SYMBOL(gxio_mpipe_init_notif_group); - -struct alloc_buckets_param { - unsigned int count; - unsigned int first; - unsigned int flags; -}; - -int gxio_mpipe_alloc_buckets(gxio_mpipe_context_t *context, unsigned int count, - unsigned int first, unsigned int flags) -{ - struct alloc_buckets_param temp; - struct alloc_buckets_param *params = &temp; - - params->count = count; - params->first = first; - params->flags = flags; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_MPIPE_OP_ALLOC_BUCKETS); -} - -EXPORT_SYMBOL(gxio_mpipe_alloc_buckets); - -struct init_bucket_param { - unsigned int bucket; - MPIPE_LBL_INIT_DAT_BSTS_TBL_t bucket_info; -}; - -int gxio_mpipe_init_bucket(gxio_mpipe_context_t *context, unsigned int bucket, - MPIPE_LBL_INIT_DAT_BSTS_TBL_t bucket_info) -{ - struct init_bucket_param temp; - struct init_bucket_param *params = &temp; - - params->bucket = bucket; - params->bucket_info = bucket_info; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_MPIPE_OP_INIT_BUCKET); -} - -EXPORT_SYMBOL(gxio_mpipe_init_bucket); - -struct alloc_edma_rings_param { - unsigned int count; - unsigned int first; - unsigned int flags; -}; - -int gxio_mpipe_alloc_edma_rings(gxio_mpipe_context_t *context, - unsigned int count, unsigned int first, - unsigned int flags) -{ - struct alloc_edma_rings_param temp; - struct alloc_edma_rings_param *params = &temp; - - params->count = count; - params->first = first; - params->flags = flags; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_MPIPE_OP_ALLOC_EDMA_RINGS); -} - -EXPORT_SYMBOL(gxio_mpipe_alloc_edma_rings); - -struct init_edma_ring_aux_param { - union iorpc_mem_buffer buffer; - unsigned int ring; - unsigned int channel; -}; - -int gxio_mpipe_init_edma_ring_aux(gxio_mpipe_context_t *context, void *mem_va, - size_t mem_size, unsigned int mem_flags, - unsigned int ring, unsigned int channel) -{ - int __result; - unsigned long long __cpa; - pte_t __pte; - struct init_edma_ring_aux_param temp; - struct init_edma_ring_aux_param *params = &temp; - - __result = va_to_cpa_and_pte(mem_va, &__cpa, &__pte); - if (__result != 0) - return __result; - params->buffer.kernel.cpa = __cpa; - params->buffer.kernel.size = mem_size; - params->buffer.kernel.pte = __pte; - params->buffer.kernel.flags = mem_flags; - params->ring = ring; - params->channel = channel; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_MPIPE_OP_INIT_EDMA_RING_AUX); -} - -EXPORT_SYMBOL(gxio_mpipe_init_edma_ring_aux); - - -int gxio_mpipe_commit_rules(gxio_mpipe_context_t *context, const void *blob, - size_t blob_size) -{ - const void *params = blob; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, blob_size, - GXIO_MPIPE_OP_COMMIT_RULES); -} - -EXPORT_SYMBOL(gxio_mpipe_commit_rules); - -struct register_client_memory_param { - unsigned int iotlb; - HV_PTE pte; - unsigned int flags; -}; - -int gxio_mpipe_register_client_memory(gxio_mpipe_context_t *context, - unsigned int iotlb, HV_PTE pte, - unsigned int flags) -{ - struct register_client_memory_param temp; - struct register_client_memory_param *params = &temp; - - params->iotlb = iotlb; - params->pte = pte; - params->flags = flags; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), - GXIO_MPIPE_OP_REGISTER_CLIENT_MEMORY); -} - -EXPORT_SYMBOL(gxio_mpipe_register_client_memory); - -struct link_open_aux_param { - _gxio_mpipe_link_name_t name; - unsigned int flags; -}; - -int gxio_mpipe_link_open_aux(gxio_mpipe_context_t *context, - _gxio_mpipe_link_name_t name, unsigned int flags) -{ - struct link_open_aux_param temp; - struct link_open_aux_param *params = &temp; - - params->name = name; - params->flags = flags; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_MPIPE_OP_LINK_OPEN_AUX); -} - -EXPORT_SYMBOL(gxio_mpipe_link_open_aux); - -struct link_close_aux_param { - int mac; -}; - -int gxio_mpipe_link_close_aux(gxio_mpipe_context_t *context, int mac) -{ - struct link_close_aux_param temp; - struct link_close_aux_param *params = &temp; - - params->mac = mac; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_MPIPE_OP_LINK_CLOSE_AUX); -} - -EXPORT_SYMBOL(gxio_mpipe_link_close_aux); - -struct link_set_attr_aux_param { - int mac; - uint32_t attr; - int64_t val; -}; - -int gxio_mpipe_link_set_attr_aux(gxio_mpipe_context_t *context, int mac, - uint32_t attr, int64_t val) -{ - struct link_set_attr_aux_param temp; - struct link_set_attr_aux_param *params = &temp; - - params->mac = mac; - params->attr = attr; - params->val = val; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_MPIPE_OP_LINK_SET_ATTR_AUX); -} - -EXPORT_SYMBOL(gxio_mpipe_link_set_attr_aux); - -struct get_timestamp_aux_param { - uint64_t sec; - uint64_t nsec; - uint64_t cycles; -}; - -int gxio_mpipe_get_timestamp_aux(gxio_mpipe_context_t *context, uint64_t *sec, - uint64_t *nsec, uint64_t *cycles) -{ - int __result; - struct get_timestamp_aux_param temp; - struct get_timestamp_aux_param *params = &temp; - - __result = - hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params), - GXIO_MPIPE_OP_GET_TIMESTAMP_AUX); - *sec = params->sec; - *nsec = params->nsec; - *cycles = params->cycles; - - return __result; -} - -EXPORT_SYMBOL(gxio_mpipe_get_timestamp_aux); - -struct set_timestamp_aux_param { - uint64_t sec; - uint64_t nsec; - uint64_t cycles; -}; - -int gxio_mpipe_set_timestamp_aux(gxio_mpipe_context_t *context, uint64_t sec, - uint64_t nsec, uint64_t cycles) -{ - struct set_timestamp_aux_param temp; - struct set_timestamp_aux_param *params = &temp; - - params->sec = sec; - params->nsec = nsec; - params->cycles = cycles; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_MPIPE_OP_SET_TIMESTAMP_AUX); -} - -EXPORT_SYMBOL(gxio_mpipe_set_timestamp_aux); - -struct adjust_timestamp_aux_param { - int64_t nsec; -}; - -int gxio_mpipe_adjust_timestamp_aux(gxio_mpipe_context_t *context, int64_t nsec) -{ - struct adjust_timestamp_aux_param temp; - struct adjust_timestamp_aux_param *params = &temp; - - params->nsec = nsec; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), - GXIO_MPIPE_OP_ADJUST_TIMESTAMP_AUX); -} - -EXPORT_SYMBOL(gxio_mpipe_adjust_timestamp_aux); - -struct config_edma_ring_blks_param { - unsigned int ering; - unsigned int max_blks; - unsigned int min_snf_blks; - unsigned int db; -}; - -int gxio_mpipe_config_edma_ring_blks(gxio_mpipe_context_t *context, - unsigned int ering, unsigned int max_blks, - unsigned int min_snf_blks, unsigned int db) -{ - struct config_edma_ring_blks_param temp; - struct config_edma_ring_blks_param *params = &temp; - - params->ering = ering; - params->max_blks = max_blks; - params->min_snf_blks = min_snf_blks; - params->db = db; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), - GXIO_MPIPE_OP_CONFIG_EDMA_RING_BLKS); -} - -EXPORT_SYMBOL(gxio_mpipe_config_edma_ring_blks); - -struct adjust_timestamp_freq_param { - int32_t ppb; -}; - -int gxio_mpipe_adjust_timestamp_freq(gxio_mpipe_context_t *context, int32_t ppb) -{ - struct adjust_timestamp_freq_param temp; - struct adjust_timestamp_freq_param *params = &temp; - - params->ppb = ppb; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), - GXIO_MPIPE_OP_ADJUST_TIMESTAMP_FREQ); -} - -EXPORT_SYMBOL(gxio_mpipe_adjust_timestamp_freq); - -struct arm_pollfd_param { - union iorpc_pollfd pollfd; -}; - -int gxio_mpipe_arm_pollfd(gxio_mpipe_context_t *context, int pollfd_cookie) -{ - struct arm_pollfd_param temp; - struct arm_pollfd_param *params = &temp; - - params->pollfd.kernel.cookie = pollfd_cookie; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_MPIPE_OP_ARM_POLLFD); -} - -EXPORT_SYMBOL(gxio_mpipe_arm_pollfd); - -struct close_pollfd_param { - union iorpc_pollfd pollfd; -}; - -int gxio_mpipe_close_pollfd(gxio_mpipe_context_t *context, int pollfd_cookie) -{ - struct close_pollfd_param temp; - struct close_pollfd_param *params = &temp; - - params->pollfd.kernel.cookie = pollfd_cookie; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_MPIPE_OP_CLOSE_POLLFD); -} - -EXPORT_SYMBOL(gxio_mpipe_close_pollfd); - -struct get_mmio_base_param { - HV_PTE base; -}; - -int gxio_mpipe_get_mmio_base(gxio_mpipe_context_t *context, HV_PTE *base) -{ - int __result; - struct get_mmio_base_param temp; - struct get_mmio_base_param *params = &temp; - - __result = - hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params), - GXIO_MPIPE_OP_GET_MMIO_BASE); - *base = params->base; - - return __result; -} - -EXPORT_SYMBOL(gxio_mpipe_get_mmio_base); - -struct check_mmio_offset_param { - unsigned long offset; - unsigned long size; -}; - -int gxio_mpipe_check_mmio_offset(gxio_mpipe_context_t *context, - unsigned long offset, unsigned long size) -{ - struct check_mmio_offset_param temp; - struct check_mmio_offset_param *params = &temp; - - params->offset = offset; - params->size = size; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_MPIPE_OP_CHECK_MMIO_OFFSET); -} - -EXPORT_SYMBOL(gxio_mpipe_check_mmio_offset); diff --git a/arch/tile/gxio/iorpc_mpipe_info.c b/arch/tile/gxio/iorpc_mpipe_info.c deleted file mode 100644 index 77019c6e9b4a..000000000000 --- a/arch/tile/gxio/iorpc_mpipe_info.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* This file is machine-generated; DO NOT EDIT! */ -#include "gxio/iorpc_mpipe_info.h" - -struct instance_aux_param { - _gxio_mpipe_link_name_t name; -}; - -int gxio_mpipe_info_instance_aux(gxio_mpipe_info_context_t *context, - _gxio_mpipe_link_name_t name) -{ - struct instance_aux_param temp; - struct instance_aux_param *params = &temp; - - params->name = name; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_MPIPE_INFO_OP_INSTANCE_AUX); -} - -EXPORT_SYMBOL(gxio_mpipe_info_instance_aux); - -struct enumerate_aux_param { - _gxio_mpipe_link_name_t name; - _gxio_mpipe_link_mac_t mac; -}; - -int gxio_mpipe_info_enumerate_aux(gxio_mpipe_info_context_t *context, - unsigned int idx, - _gxio_mpipe_link_name_t *name, - _gxio_mpipe_link_mac_t *mac) -{ - int __result; - struct enumerate_aux_param temp; - struct enumerate_aux_param *params = &temp; - - __result = - hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params), - (((uint64_t)idx << 32) | - GXIO_MPIPE_INFO_OP_ENUMERATE_AUX)); - *name = params->name; - *mac = params->mac; - - return __result; -} - -EXPORT_SYMBOL(gxio_mpipe_info_enumerate_aux); - -struct get_mmio_base_param { - HV_PTE base; -}; - -int gxio_mpipe_info_get_mmio_base(gxio_mpipe_info_context_t *context, - HV_PTE *base) -{ - int __result; - struct get_mmio_base_param temp; - struct get_mmio_base_param *params = &temp; - - __result = - hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params), - GXIO_MPIPE_INFO_OP_GET_MMIO_BASE); - *base = params->base; - - return __result; -} - -EXPORT_SYMBOL(gxio_mpipe_info_get_mmio_base); - -struct check_mmio_offset_param { - unsigned long offset; - unsigned long size; -}; - -int gxio_mpipe_info_check_mmio_offset(gxio_mpipe_info_context_t *context, - unsigned long offset, unsigned long size) -{ - struct check_mmio_offset_param temp; - struct check_mmio_offset_param *params = &temp; - - params->offset = offset; - params->size = size; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), - GXIO_MPIPE_INFO_OP_CHECK_MMIO_OFFSET); -} - -EXPORT_SYMBOL(gxio_mpipe_info_check_mmio_offset); diff --git a/arch/tile/gxio/iorpc_trio.c b/arch/tile/gxio/iorpc_trio.c deleted file mode 100644 index 1d3cedb9aeb4..000000000000 --- a/arch/tile/gxio/iorpc_trio.c +++ /dev/null @@ -1,350 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* This file is machine-generated; DO NOT EDIT! */ -#include "gxio/iorpc_trio.h" - -struct alloc_asids_param { - unsigned int count; - unsigned int first; - unsigned int flags; -}; - -int gxio_trio_alloc_asids(gxio_trio_context_t *context, unsigned int count, - unsigned int first, unsigned int flags) -{ - struct alloc_asids_param temp; - struct alloc_asids_param *params = &temp; - - params->count = count; - params->first = first; - params->flags = flags; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_TRIO_OP_ALLOC_ASIDS); -} - -EXPORT_SYMBOL(gxio_trio_alloc_asids); - - -struct alloc_memory_maps_param { - unsigned int count; - unsigned int first; - unsigned int flags; -}; - -int gxio_trio_alloc_memory_maps(gxio_trio_context_t *context, - unsigned int count, unsigned int first, - unsigned int flags) -{ - struct alloc_memory_maps_param temp; - struct alloc_memory_maps_param *params = &temp; - - params->count = count; - params->first = first; - params->flags = flags; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_TRIO_OP_ALLOC_MEMORY_MAPS); -} - -EXPORT_SYMBOL(gxio_trio_alloc_memory_maps); - -struct alloc_scatter_queues_param { - unsigned int count; - unsigned int first; - unsigned int flags; -}; - -int gxio_trio_alloc_scatter_queues(gxio_trio_context_t *context, - unsigned int count, unsigned int first, - unsigned int flags) -{ - struct alloc_scatter_queues_param temp; - struct alloc_scatter_queues_param *params = &temp; - - params->count = count; - params->first = first; - params->flags = flags; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), - GXIO_TRIO_OP_ALLOC_SCATTER_QUEUES); -} - -EXPORT_SYMBOL(gxio_trio_alloc_scatter_queues); - -struct alloc_pio_regions_param { - unsigned int count; - unsigned int first; - unsigned int flags; -}; - -int gxio_trio_alloc_pio_regions(gxio_trio_context_t *context, - unsigned int count, unsigned int first, - unsigned int flags) -{ - struct alloc_pio_regions_param temp; - struct alloc_pio_regions_param *params = &temp; - - params->count = count; - params->first = first; - params->flags = flags; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_TRIO_OP_ALLOC_PIO_REGIONS); -} - -EXPORT_SYMBOL(gxio_trio_alloc_pio_regions); - -struct init_pio_region_aux_param { - unsigned int pio_region; - unsigned int mac; - uint32_t bus_address_hi; - unsigned int flags; -}; - -int gxio_trio_init_pio_region_aux(gxio_trio_context_t *context, - unsigned int pio_region, unsigned int mac, - uint32_t bus_address_hi, unsigned int flags) -{ - struct init_pio_region_aux_param temp; - struct init_pio_region_aux_param *params = &temp; - - params->pio_region = pio_region; - params->mac = mac; - params->bus_address_hi = bus_address_hi; - params->flags = flags; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_TRIO_OP_INIT_PIO_REGION_AUX); -} - -EXPORT_SYMBOL(gxio_trio_init_pio_region_aux); - - -struct init_memory_map_mmu_aux_param { - unsigned int map; - unsigned long va; - uint64_t size; - unsigned int asid; - unsigned int mac; - uint64_t bus_address; - unsigned int node; - unsigned int order_mode; -}; - -int gxio_trio_init_memory_map_mmu_aux(gxio_trio_context_t *context, - unsigned int map, unsigned long va, - uint64_t size, unsigned int asid, - unsigned int mac, uint64_t bus_address, - unsigned int node, - unsigned int order_mode) -{ - struct init_memory_map_mmu_aux_param temp; - struct init_memory_map_mmu_aux_param *params = &temp; - - params->map = map; - params->va = va; - params->size = size; - params->asid = asid; - params->mac = mac; - params->bus_address = bus_address; - params->node = node; - params->order_mode = order_mode; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), - GXIO_TRIO_OP_INIT_MEMORY_MAP_MMU_AUX); -} - -EXPORT_SYMBOL(gxio_trio_init_memory_map_mmu_aux); - -struct get_port_property_param { - struct pcie_trio_ports_property trio_ports; -}; - -int gxio_trio_get_port_property(gxio_trio_context_t *context, - struct pcie_trio_ports_property *trio_ports) -{ - int __result; - struct get_port_property_param temp; - struct get_port_property_param *params = &temp; - - __result = - hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params), - GXIO_TRIO_OP_GET_PORT_PROPERTY); - *trio_ports = params->trio_ports; - - return __result; -} - -EXPORT_SYMBOL(gxio_trio_get_port_property); - -struct config_legacy_intr_param { - union iorpc_interrupt interrupt; - unsigned int mac; - unsigned int intx; -}; - -int gxio_trio_config_legacy_intr(gxio_trio_context_t *context, int inter_x, - int inter_y, int inter_ipi, int inter_event, - unsigned int mac, unsigned int intx) -{ - struct config_legacy_intr_param temp; - struct config_legacy_intr_param *params = &temp; - - params->interrupt.kernel.x = inter_x; - params->interrupt.kernel.y = inter_y; - params->interrupt.kernel.ipi = inter_ipi; - params->interrupt.kernel.event = inter_event; - params->mac = mac; - params->intx = intx; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_TRIO_OP_CONFIG_LEGACY_INTR); -} - -EXPORT_SYMBOL(gxio_trio_config_legacy_intr); - -struct config_msi_intr_param { - union iorpc_interrupt interrupt; - unsigned int mac; - unsigned int mem_map; - uint64_t mem_map_base; - uint64_t mem_map_limit; - unsigned int asid; -}; - -int gxio_trio_config_msi_intr(gxio_trio_context_t *context, int inter_x, - int inter_y, int inter_ipi, int inter_event, - unsigned int mac, unsigned int mem_map, - uint64_t mem_map_base, uint64_t mem_map_limit, - unsigned int asid) -{ - struct config_msi_intr_param temp; - struct config_msi_intr_param *params = &temp; - - params->interrupt.kernel.x = inter_x; - params->interrupt.kernel.y = inter_y; - params->interrupt.kernel.ipi = inter_ipi; - params->interrupt.kernel.event = inter_event; - params->mac = mac; - params->mem_map = mem_map; - params->mem_map_base = mem_map_base; - params->mem_map_limit = mem_map_limit; - params->asid = asid; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_TRIO_OP_CONFIG_MSI_INTR); -} - -EXPORT_SYMBOL(gxio_trio_config_msi_intr); - - -struct set_mps_mrs_param { - uint16_t mps; - uint16_t mrs; - unsigned int mac; -}; - -int gxio_trio_set_mps_mrs(gxio_trio_context_t *context, uint16_t mps, - uint16_t mrs, unsigned int mac) -{ - struct set_mps_mrs_param temp; - struct set_mps_mrs_param *params = &temp; - - params->mps = mps; - params->mrs = mrs; - params->mac = mac; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_TRIO_OP_SET_MPS_MRS); -} - -EXPORT_SYMBOL(gxio_trio_set_mps_mrs); - -struct force_rc_link_up_param { - unsigned int mac; -}; - -int gxio_trio_force_rc_link_up(gxio_trio_context_t *context, unsigned int mac) -{ - struct force_rc_link_up_param temp; - struct force_rc_link_up_param *params = &temp; - - params->mac = mac; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_TRIO_OP_FORCE_RC_LINK_UP); -} - -EXPORT_SYMBOL(gxio_trio_force_rc_link_up); - -struct force_ep_link_up_param { - unsigned int mac; -}; - -int gxio_trio_force_ep_link_up(gxio_trio_context_t *context, unsigned int mac) -{ - struct force_ep_link_up_param temp; - struct force_ep_link_up_param *params = &temp; - - params->mac = mac; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_TRIO_OP_FORCE_EP_LINK_UP); -} - -EXPORT_SYMBOL(gxio_trio_force_ep_link_up); - -struct get_mmio_base_param { - HV_PTE base; -}; - -int gxio_trio_get_mmio_base(gxio_trio_context_t *context, HV_PTE *base) -{ - int __result; - struct get_mmio_base_param temp; - struct get_mmio_base_param *params = &temp; - - __result = - hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params), - GXIO_TRIO_OP_GET_MMIO_BASE); - *base = params->base; - - return __result; -} - -EXPORT_SYMBOL(gxio_trio_get_mmio_base); - -struct check_mmio_offset_param { - unsigned long offset; - unsigned long size; -}; - -int gxio_trio_check_mmio_offset(gxio_trio_context_t *context, - unsigned long offset, unsigned long size) -{ - struct check_mmio_offset_param temp; - struct check_mmio_offset_param *params = &temp; - - params->offset = offset; - params->size = size; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_TRIO_OP_CHECK_MMIO_OFFSET); -} - -EXPORT_SYMBOL(gxio_trio_check_mmio_offset); diff --git a/arch/tile/gxio/iorpc_uart.c b/arch/tile/gxio/iorpc_uart.c deleted file mode 100644 index b9a6d6193d73..000000000000 --- a/arch/tile/gxio/iorpc_uart.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright 2013 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* This file is machine-generated; DO NOT EDIT! */ -#include "gxio/iorpc_uart.h" - -struct cfg_interrupt_param { - union iorpc_interrupt interrupt; -}; - -int gxio_uart_cfg_interrupt(gxio_uart_context_t *context, int inter_x, - int inter_y, int inter_ipi, int inter_event) -{ - struct cfg_interrupt_param temp; - struct cfg_interrupt_param *params = &temp; - - params->interrupt.kernel.x = inter_x; - params->interrupt.kernel.y = inter_y; - params->interrupt.kernel.ipi = inter_ipi; - params->interrupt.kernel.event = inter_event; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_UART_OP_CFG_INTERRUPT); -} - -EXPORT_SYMBOL(gxio_uart_cfg_interrupt); - -struct get_mmio_base_param { - HV_PTE base; -}; - -int gxio_uart_get_mmio_base(gxio_uart_context_t *context, HV_PTE *base) -{ - int __result; - struct get_mmio_base_param temp; - struct get_mmio_base_param *params = &temp; - - __result = - hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params), - GXIO_UART_OP_GET_MMIO_BASE); - *base = params->base; - - return __result; -} - -EXPORT_SYMBOL(gxio_uart_get_mmio_base); - -struct check_mmio_offset_param { - unsigned long offset; - unsigned long size; -}; - -int gxio_uart_check_mmio_offset(gxio_uart_context_t *context, - unsigned long offset, unsigned long size) -{ - struct check_mmio_offset_param temp; - struct check_mmio_offset_param *params = &temp; - - params->offset = offset; - params->size = size; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_UART_OP_CHECK_MMIO_OFFSET); -} - -EXPORT_SYMBOL(gxio_uart_check_mmio_offset); diff --git a/arch/tile/gxio/iorpc_usb_host.c b/arch/tile/gxio/iorpc_usb_host.c deleted file mode 100644 index 9c820073bfc0..000000000000 --- a/arch/tile/gxio/iorpc_usb_host.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* This file is machine-generated; DO NOT EDIT! */ -#include "gxio/iorpc_usb_host.h" - -struct cfg_interrupt_param { - union iorpc_interrupt interrupt; -}; - -int gxio_usb_host_cfg_interrupt(gxio_usb_host_context_t *context, int inter_x, - int inter_y, int inter_ipi, int inter_event) -{ - struct cfg_interrupt_param temp; - struct cfg_interrupt_param *params = &temp; - - params->interrupt.kernel.x = inter_x; - params->interrupt.kernel.y = inter_y; - params->interrupt.kernel.ipi = inter_ipi; - params->interrupt.kernel.event = inter_event; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), GXIO_USB_HOST_OP_CFG_INTERRUPT); -} - -EXPORT_SYMBOL(gxio_usb_host_cfg_interrupt); - -struct register_client_memory_param { - HV_PTE pte; - unsigned int flags; -}; - -int gxio_usb_host_register_client_memory(gxio_usb_host_context_t *context, - HV_PTE pte, unsigned int flags) -{ - struct register_client_memory_param temp; - struct register_client_memory_param *params = &temp; - - params->pte = pte; - params->flags = flags; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), - GXIO_USB_HOST_OP_REGISTER_CLIENT_MEMORY); -} - -EXPORT_SYMBOL(gxio_usb_host_register_client_memory); - -struct get_mmio_base_param { - HV_PTE base; -}; - -int gxio_usb_host_get_mmio_base(gxio_usb_host_context_t *context, HV_PTE *base) -{ - int __result; - struct get_mmio_base_param temp; - struct get_mmio_base_param *params = &temp; - - __result = - hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params), - GXIO_USB_HOST_OP_GET_MMIO_BASE); - *base = params->base; - - return __result; -} - -EXPORT_SYMBOL(gxio_usb_host_get_mmio_base); - -struct check_mmio_offset_param { - unsigned long offset; - unsigned long size; -}; - -int gxio_usb_host_check_mmio_offset(gxio_usb_host_context_t *context, - unsigned long offset, unsigned long size) -{ - struct check_mmio_offset_param temp; - struct check_mmio_offset_param *params = &temp; - - params->offset = offset; - params->size = size; - - return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, - sizeof(*params), - GXIO_USB_HOST_OP_CHECK_MMIO_OFFSET); -} - -EXPORT_SYMBOL(gxio_usb_host_check_mmio_offset); diff --git a/arch/tile/gxio/kiorpc.c b/arch/tile/gxio/kiorpc.c deleted file mode 100644 index c8096aa5a3fc..000000000000 --- a/arch/tile/gxio/kiorpc.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * TILE-Gx IORPC support for kernel I/O drivers. - */ - -#include <linux/mmzone.h> -#include <linux/module.h> -#include <linux/io.h> -#include <gxio/iorpc_globals.h> -#include <gxio/kiorpc.h> - -#ifdef DEBUG_IORPC -#define TRACE(FMT, ...) pr_info(SIMPLE_MSG_LINE FMT, ## __VA_ARGS__) -#else -#define TRACE(...) -#endif - -/* Create kernel-VA-space MMIO mapping for an on-chip IO device. */ -void __iomem *iorpc_ioremap(int hv_fd, resource_size_t offset, - unsigned long size) -{ - pgprot_t mmio_base, prot = { 0 }; - unsigned long pfn; - int err; - - /* Look up the shim's lotar and base PA. */ - err = __iorpc_get_mmio_base(hv_fd, &mmio_base); - if (err) { - TRACE("get_mmio_base() failure: %d\n", err); - return NULL; - } - - /* Make sure the HV driver approves of our offset and size. */ - err = __iorpc_check_mmio_offset(hv_fd, offset, size); - if (err) { - TRACE("check_mmio_offset() failure: %d\n", err); - return NULL; - } - - /* - * mmio_base contains a base pfn and homing coordinates. Turn - * it into an MMIO pgprot and offset pfn. - */ - prot = hv_pte_set_lotar(prot, hv_pte_get_lotar(mmio_base)); - pfn = pte_pfn(mmio_base) + PFN_DOWN(offset); - - return ioremap_prot(PFN_PHYS(pfn), size, prot); -} - -EXPORT_SYMBOL(iorpc_ioremap); diff --git a/arch/tile/gxio/mpipe.c b/arch/tile/gxio/mpipe.c deleted file mode 100644 index 34de300ab320..000000000000 --- a/arch/tile/gxio/mpipe.c +++ /dev/null @@ -1,584 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* - * Implementation of mpipe gxio calls. - */ - -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/string.h> - -#include <gxio/iorpc_globals.h> -#include <gxio/iorpc_mpipe.h> -#include <gxio/iorpc_mpipe_info.h> -#include <gxio/kiorpc.h> -#include <gxio/mpipe.h> - -/* HACK: Avoid pointless "shadow" warnings. */ -#define link link_shadow - -int gxio_mpipe_init(gxio_mpipe_context_t *context, unsigned int mpipe_index) -{ - char file[32]; - - int fd; - int i; - - if (mpipe_index >= GXIO_MPIPE_INSTANCE_MAX) - return -EINVAL; - - snprintf(file, sizeof(file), "mpipe/%d/iorpc", mpipe_index); - fd = hv_dev_open((HV_VirtAddr) file, 0); - - context->fd = fd; - - if (fd < 0) { - if (fd >= GXIO_ERR_MIN && fd <= GXIO_ERR_MAX) - return fd; - else - return -ENODEV; - } - - /* Map in the MMIO space. */ - context->mmio_cfg_base = (void __force *) - iorpc_ioremap(fd, HV_MPIPE_CONFIG_MMIO_OFFSET, - HV_MPIPE_CONFIG_MMIO_SIZE); - if (context->mmio_cfg_base == NULL) - goto cfg_failed; - - context->mmio_fast_base = (void __force *) - iorpc_ioremap(fd, HV_MPIPE_FAST_MMIO_OFFSET, - HV_MPIPE_FAST_MMIO_SIZE); - if (context->mmio_fast_base == NULL) - goto fast_failed; - - /* Initialize the stacks. */ - for (i = 0; i < 8; i++) - context->__stacks.stacks[i] = 255; - - context->instance = mpipe_index; - - return 0; - - fast_failed: - iounmap((void __force __iomem *)(context->mmio_cfg_base)); - cfg_failed: - hv_dev_close(context->fd); - context->fd = -1; - return -ENODEV; -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_init); - -int gxio_mpipe_destroy(gxio_mpipe_context_t *context) -{ - iounmap((void __force __iomem *)(context->mmio_cfg_base)); - iounmap((void __force __iomem *)(context->mmio_fast_base)); - return hv_dev_close(context->fd); -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_destroy); - -static int16_t gxio_mpipe_buffer_sizes[8] = - { 128, 256, 512, 1024, 1664, 4096, 10368, 16384 }; - -gxio_mpipe_buffer_size_enum_t gxio_mpipe_buffer_size_to_buffer_size_enum(size_t - size) -{ - int i; - for (i = 0; i < 7; i++) - if (size <= gxio_mpipe_buffer_sizes[i]) - break; - return i; -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_buffer_size_to_buffer_size_enum); - -size_t gxio_mpipe_buffer_size_enum_to_buffer_size(gxio_mpipe_buffer_size_enum_t - buffer_size_enum) -{ - if (buffer_size_enum > 7) - buffer_size_enum = 7; - - return gxio_mpipe_buffer_sizes[buffer_size_enum]; -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_buffer_size_enum_to_buffer_size); - -size_t gxio_mpipe_calc_buffer_stack_bytes(unsigned long buffers) -{ - const int BUFFERS_PER_LINE = 12; - - /* Count the number of cachelines. */ - unsigned long lines = - (buffers + BUFFERS_PER_LINE - 1) / BUFFERS_PER_LINE; - - /* Convert to bytes. */ - return lines * CHIP_L2_LINE_SIZE(); -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_calc_buffer_stack_bytes); - -int gxio_mpipe_init_buffer_stack(gxio_mpipe_context_t *context, - unsigned int stack, - gxio_mpipe_buffer_size_enum_t - buffer_size_enum, void *mem, size_t mem_size, - unsigned int mem_flags) -{ - int result; - - memset(mem, 0, mem_size); - - result = gxio_mpipe_init_buffer_stack_aux(context, mem, mem_size, - mem_flags, stack, - buffer_size_enum); - if (result < 0) - return result; - - /* Save the stack. */ - context->__stacks.stacks[buffer_size_enum] = stack; - - return 0; -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_init_buffer_stack); - -int gxio_mpipe_init_notif_ring(gxio_mpipe_context_t *context, - unsigned int ring, - void *mem, size_t mem_size, - unsigned int mem_flags) -{ - return gxio_mpipe_init_notif_ring_aux(context, mem, mem_size, - mem_flags, ring); -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_init_notif_ring); - -int gxio_mpipe_init_notif_group_and_buckets(gxio_mpipe_context_t *context, - unsigned int group, - unsigned int ring, - unsigned int num_rings, - unsigned int bucket, - unsigned int num_buckets, - gxio_mpipe_bucket_mode_t mode) -{ - int i; - int result; - - gxio_mpipe_bucket_info_t bucket_info = { { - .group = group, - .mode = mode, - } - }; - - gxio_mpipe_notif_group_bits_t bits = { {0} }; - - for (i = 0; i < num_rings; i++) - gxio_mpipe_notif_group_add_ring(&bits, ring + i); - - result = gxio_mpipe_init_notif_group(context, group, bits); - if (result != 0) - return result; - - for (i = 0; i < num_buckets; i++) { - bucket_info.notifring = ring + (i % num_rings); - - result = gxio_mpipe_init_bucket(context, bucket + i, - bucket_info); - if (result != 0) - return result; - } - - return 0; -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_init_notif_group_and_buckets); - -int gxio_mpipe_init_edma_ring(gxio_mpipe_context_t *context, - unsigned int ring, unsigned int channel, - void *mem, size_t mem_size, - unsigned int mem_flags) -{ - memset(mem, 0, mem_size); - - return gxio_mpipe_init_edma_ring_aux(context, mem, mem_size, mem_flags, - ring, channel); -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_init_edma_ring); - -void gxio_mpipe_rules_init(gxio_mpipe_rules_t *rules, - gxio_mpipe_context_t *context) -{ - rules->context = context; - memset(&rules->list, 0, sizeof(rules->list)); -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_rules_init); - -int gxio_mpipe_rules_begin(gxio_mpipe_rules_t *rules, - unsigned int bucket, unsigned int num_buckets, - gxio_mpipe_rules_stacks_t *stacks) -{ - int i; - int stack = 255; - - gxio_mpipe_rules_list_t *list = &rules->list; - - /* Current rule. */ - gxio_mpipe_rules_rule_t *rule = - (gxio_mpipe_rules_rule_t *) (list->rules + list->head); - - unsigned int head = list->tail; - - /* - * Align next rule properly. - *Note that "dmacs_and_vlans" will also be aligned. - */ - unsigned int pad = 0; - while (((head + pad) % __alignof__(gxio_mpipe_rules_rule_t)) != 0) - pad++; - - /* - * Verify room. - * ISSUE: Mark rules as broken on error? - */ - if (head + pad + sizeof(*rule) >= sizeof(list->rules)) - return GXIO_MPIPE_ERR_RULES_FULL; - - /* Verify num_buckets is a power of 2. */ - if (__builtin_popcount(num_buckets) != 1) - return GXIO_MPIPE_ERR_RULES_INVALID; - - /* Add padding to previous rule. */ - rule->size += pad; - - /* Start a new rule. */ - list->head = head + pad; - - rule = (gxio_mpipe_rules_rule_t *) (list->rules + list->head); - - /* Default some values. */ - rule->headroom = 2; - rule->tailroom = 0; - rule->capacity = 16384; - - /* Save the bucket info. */ - rule->bucket_mask = num_buckets - 1; - rule->bucket_first = bucket; - - for (i = 8 - 1; i >= 0; i--) { - int maybe = - stacks ? stacks->stacks[i] : rules->context->__stacks. - stacks[i]; - if (maybe != 255) - stack = maybe; - rule->stacks.stacks[i] = stack; - } - - if (stack == 255) - return GXIO_MPIPE_ERR_RULES_INVALID; - - /* NOTE: Only entries at the end of the array can be 255. */ - for (i = 8 - 1; i > 0; i--) { - if (rule->stacks.stacks[i] == 255) { - rule->stacks.stacks[i] = stack; - rule->capacity = - gxio_mpipe_buffer_size_enum_to_buffer_size(i - - 1); - } - } - - rule->size = sizeof(*rule); - list->tail = list->head + rule->size; - - return 0; -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_rules_begin); - -int gxio_mpipe_rules_add_channel(gxio_mpipe_rules_t *rules, - unsigned int channel) -{ - gxio_mpipe_rules_list_t *list = &rules->list; - - gxio_mpipe_rules_rule_t *rule = - (gxio_mpipe_rules_rule_t *) (list->rules + list->head); - - /* Verify channel. */ - if (channel >= 32) - return GXIO_MPIPE_ERR_RULES_INVALID; - - /* Verify begun. */ - if (list->tail == 0) - return GXIO_MPIPE_ERR_RULES_EMPTY; - - rule->channel_bits |= (1UL << channel); - - return 0; -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_rules_add_channel); - -int gxio_mpipe_rules_set_headroom(gxio_mpipe_rules_t *rules, uint8_t headroom) -{ - gxio_mpipe_rules_list_t *list = &rules->list; - - gxio_mpipe_rules_rule_t *rule = - (gxio_mpipe_rules_rule_t *) (list->rules + list->head); - - /* Verify begun. */ - if (list->tail == 0) - return GXIO_MPIPE_ERR_RULES_EMPTY; - - rule->headroom = headroom; - - return 0; -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_rules_set_headroom); - -int gxio_mpipe_rules_commit(gxio_mpipe_rules_t *rules) -{ - gxio_mpipe_rules_list_t *list = &rules->list; - unsigned int size = - offsetof(gxio_mpipe_rules_list_t, rules) + list->tail; - return gxio_mpipe_commit_rules(rules->context, list, size); -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_rules_commit); - -int gxio_mpipe_iqueue_init(gxio_mpipe_iqueue_t *iqueue, - gxio_mpipe_context_t *context, - unsigned int ring, - void *mem, size_t mem_size, unsigned int mem_flags) -{ - /* The init call below will verify that "mem_size" is legal. */ - unsigned int num_entries = mem_size / sizeof(gxio_mpipe_idesc_t); - - iqueue->context = context; - iqueue->idescs = (gxio_mpipe_idesc_t *)mem; - iqueue->ring = ring; - iqueue->num_entries = num_entries; - iqueue->mask_num_entries = num_entries - 1; - iqueue->log2_num_entries = __builtin_ctz(num_entries); - iqueue->head = 1; -#ifdef __BIG_ENDIAN__ - iqueue->swapped = 0; -#endif - - /* Initialize the "tail". */ - __gxio_mmio_write(mem, iqueue->head); - - return gxio_mpipe_init_notif_ring(context, ring, mem, mem_size, - mem_flags); -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_iqueue_init); - -int gxio_mpipe_equeue_init(gxio_mpipe_equeue_t *equeue, - gxio_mpipe_context_t *context, - unsigned int ering, - unsigned int channel, - void *mem, unsigned int mem_size, - unsigned int mem_flags) -{ - /* The init call below will verify that "mem_size" is legal. */ - unsigned int num_entries = mem_size / sizeof(gxio_mpipe_edesc_t); - - /* Offset used to read number of completed commands. */ - MPIPE_EDMA_POST_REGION_ADDR_t offset; - - int result = gxio_mpipe_init_edma_ring(context, ering, channel, - mem, mem_size, mem_flags); - if (result < 0) - return result; - - memset(equeue, 0, sizeof(*equeue)); - - offset.word = 0; - offset.region = - MPIPE_MMIO_ADDR__REGION_VAL_EDMA - - MPIPE_MMIO_ADDR__REGION_VAL_IDMA; - offset.ring = ering; - - __gxio_dma_queue_init(&equeue->dma_queue, - context->mmio_fast_base + offset.word, - num_entries); - equeue->edescs = mem; - equeue->mask_num_entries = num_entries - 1; - equeue->log2_num_entries = __builtin_ctz(num_entries); - equeue->context = context; - equeue->ering = ering; - equeue->channel = channel; - - return 0; -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_equeue_init); - -int gxio_mpipe_set_timestamp(gxio_mpipe_context_t *context, - const struct timespec64 *ts) -{ - cycles_t cycles = get_cycles(); - return gxio_mpipe_set_timestamp_aux(context, (uint64_t)ts->tv_sec, - (uint64_t)ts->tv_nsec, - (uint64_t)cycles); -} -EXPORT_SYMBOL_GPL(gxio_mpipe_set_timestamp); - -int gxio_mpipe_get_timestamp(gxio_mpipe_context_t *context, - struct timespec64 *ts) -{ - int ret; - cycles_t cycles_prev, cycles_now, clock_rate; - cycles_prev = get_cycles(); - ret = gxio_mpipe_get_timestamp_aux(context, (uint64_t *)&ts->tv_sec, - (uint64_t *)&ts->tv_nsec, - (uint64_t *)&cycles_now); - if (ret < 0) { - return ret; - } - - clock_rate = get_clock_rate(); - ts->tv_nsec -= (cycles_now - cycles_prev) * 1000000000LL / clock_rate; - if (ts->tv_nsec < 0) { - ts->tv_nsec += 1000000000LL; - ts->tv_sec -= 1; - } - return ret; -} -EXPORT_SYMBOL_GPL(gxio_mpipe_get_timestamp); - -int gxio_mpipe_adjust_timestamp(gxio_mpipe_context_t *context, int64_t delta) -{ - return gxio_mpipe_adjust_timestamp_aux(context, delta); -} -EXPORT_SYMBOL_GPL(gxio_mpipe_adjust_timestamp); - -/* Get our internal context used for link name access. This context is - * special in that it is not associated with an mPIPE service domain. - */ -static gxio_mpipe_context_t *_gxio_get_link_context(void) -{ - static gxio_mpipe_context_t context; - static gxio_mpipe_context_t *contextp; - static int tried_open = 0; - static DEFINE_MUTEX(mutex); - - mutex_lock(&mutex); - - if (!tried_open) { - int i = 0; - tried_open = 1; - - /* - * "4" here is the maximum possible number of mPIPE shims; it's - * an exaggeration but we shouldn't ever go beyond 2 anyway. - */ - for (i = 0; i < 4; i++) { - char file[80]; - - snprintf(file, sizeof(file), "mpipe/%d/iorpc_info", i); - context.fd = hv_dev_open((HV_VirtAddr) file, 0); - if (context.fd < 0) - continue; - - contextp = &context; - break; - } - } - - mutex_unlock(&mutex); - - return contextp; -} - -int gxio_mpipe_link_instance(const char *link_name) -{ - _gxio_mpipe_link_name_t name; - gxio_mpipe_context_t *context = _gxio_get_link_context(); - - if (!context) - return GXIO_ERR_NO_DEVICE; - - if (strscpy(name.name, link_name, sizeof(name.name)) < 0) - return GXIO_ERR_NO_DEVICE; - - return gxio_mpipe_info_instance_aux(context, name); -} -EXPORT_SYMBOL_GPL(gxio_mpipe_link_instance); - -int gxio_mpipe_link_enumerate_mac(int idx, char *link_name, uint8_t *link_mac) -{ - int rv; - _gxio_mpipe_link_name_t name; - _gxio_mpipe_link_mac_t mac; - - gxio_mpipe_context_t *context = _gxio_get_link_context(); - if (!context) - return GXIO_ERR_NO_DEVICE; - - rv = gxio_mpipe_info_enumerate_aux(context, idx, &name, &mac); - if (rv >= 0) { - if (strscpy(link_name, name.name, sizeof(name.name)) < 0) - return GXIO_ERR_INVAL_MEMORY_SIZE; - memcpy(link_mac, mac.mac, sizeof(mac.mac)); - } - - return rv; -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_link_enumerate_mac); - -int gxio_mpipe_link_open(gxio_mpipe_link_t *link, - gxio_mpipe_context_t *context, const char *link_name, - unsigned int flags) -{ - _gxio_mpipe_link_name_t name; - int rv; - - if (strscpy(name.name, link_name, sizeof(name.name)) < 0) - return GXIO_ERR_NO_DEVICE; - - rv = gxio_mpipe_link_open_aux(context, name, flags); - if (rv < 0) - return rv; - - link->context = context; - link->channel = rv >> 8; - link->mac = rv & 0xFF; - - return 0; -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_link_open); - -int gxio_mpipe_link_close(gxio_mpipe_link_t *link) -{ - return gxio_mpipe_link_close_aux(link->context, link->mac); -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_link_close); - -int gxio_mpipe_link_set_attr(gxio_mpipe_link_t *link, uint32_t attr, - int64_t val) -{ - return gxio_mpipe_link_set_attr_aux(link->context, link->mac, attr, - val); -} - -EXPORT_SYMBOL_GPL(gxio_mpipe_link_set_attr); diff --git a/arch/tile/gxio/trio.c b/arch/tile/gxio/trio.c deleted file mode 100644 index 69f0b8df3ce3..000000000000 --- a/arch/tile/gxio/trio.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* - * Implementation of trio gxio calls. - */ - -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/module.h> - -#include <gxio/trio.h> -#include <gxio/iorpc_globals.h> -#include <gxio/iorpc_trio.h> -#include <gxio/kiorpc.h> - -int gxio_trio_init(gxio_trio_context_t *context, unsigned int trio_index) -{ - char file[32]; - int fd; - - snprintf(file, sizeof(file), "trio/%d/iorpc", trio_index); - fd = hv_dev_open((HV_VirtAddr) file, 0); - if (fd < 0) { - context->fd = -1; - - if (fd >= GXIO_ERR_MIN && fd <= GXIO_ERR_MAX) - return fd; - else - return -ENODEV; - } - - context->fd = fd; - - return 0; -} - -EXPORT_SYMBOL_GPL(gxio_trio_init); diff --git a/arch/tile/gxio/uart.c b/arch/tile/gxio/uart.c deleted file mode 100644 index ba585175ef88..000000000000 --- a/arch/tile/gxio/uart.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Copyright 2013 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* - * Implementation of UART gxio calls. - */ - -#include <linux/io.h> -#include <linux/errno.h> -#include <linux/module.h> - -#include <gxio/uart.h> -#include <gxio/iorpc_globals.h> -#include <gxio/iorpc_uart.h> -#include <gxio/kiorpc.h> - -int gxio_uart_init(gxio_uart_context_t *context, int uart_index) -{ - char file[32]; - int fd; - - snprintf(file, sizeof(file), "uart/%d/iorpc", uart_index); - fd = hv_dev_open((HV_VirtAddr) file, 0); - if (fd < 0) { - if (fd >= GXIO_ERR_MIN && fd <= GXIO_ERR_MAX) - return fd; - else - return -ENODEV; - } - - context->fd = fd; - - /* Map in the MMIO space. */ - context->mmio_base = (void __force *) - iorpc_ioremap(fd, HV_UART_MMIO_OFFSET, HV_UART_MMIO_SIZE); - - if (context->mmio_base == NULL) { - hv_dev_close(context->fd); - context->fd = -1; - return -ENODEV; - } - - return 0; -} - -EXPORT_SYMBOL_GPL(gxio_uart_init); - -int gxio_uart_destroy(gxio_uart_context_t *context) -{ - iounmap((void __force __iomem *)(context->mmio_base)); - hv_dev_close(context->fd); - - context->mmio_base = NULL; - context->fd = -1; - - return 0; -} - -EXPORT_SYMBOL_GPL(gxio_uart_destroy); - -/* UART register write wrapper. */ -void gxio_uart_write(gxio_uart_context_t *context, uint64_t offset, - uint64_t word) -{ - __gxio_mmio_write(context->mmio_base + offset, word); -} - -EXPORT_SYMBOL_GPL(gxio_uart_write); - -/* UART register read wrapper. */ -uint64_t gxio_uart_read(gxio_uart_context_t *context, uint64_t offset) -{ - return __gxio_mmio_read(context->mmio_base + offset); -} - -EXPORT_SYMBOL_GPL(gxio_uart_read); diff --git a/arch/tile/gxio/usb_host.c b/arch/tile/gxio/usb_host.c deleted file mode 100644 index 785afad7922e..000000000000 --- a/arch/tile/gxio/usb_host.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* - * - * Implementation of USB gxio calls. - */ - -#include <linux/io.h> -#include <linux/errno.h> -#include <linux/module.h> - -#include <gxio/iorpc_globals.h> -#include <gxio/iorpc_usb_host.h> -#include <gxio/kiorpc.h> -#include <gxio/usb_host.h> - -int gxio_usb_host_init(gxio_usb_host_context_t *context, int usb_index, - int is_ehci) -{ - char file[32]; - int fd; - - if (is_ehci) - snprintf(file, sizeof(file), "usb_host/%d/iorpc/ehci", - usb_index); - else - snprintf(file, sizeof(file), "usb_host/%d/iorpc/ohci", - usb_index); - - fd = hv_dev_open((HV_VirtAddr) file, 0); - if (fd < 0) { - if (fd >= GXIO_ERR_MIN && fd <= GXIO_ERR_MAX) - return fd; - else - return -ENODEV; - } - - context->fd = fd; - - // Map in the MMIO space. - context->mmio_base = - (void __force *)iorpc_ioremap(fd, 0, HV_USB_HOST_MMIO_SIZE); - - if (context->mmio_base == NULL) { - hv_dev_close(context->fd); - return -ENODEV; - } - - return 0; -} - -EXPORT_SYMBOL_GPL(gxio_usb_host_init); - -int gxio_usb_host_destroy(gxio_usb_host_context_t *context) -{ - iounmap((void __force __iomem *)(context->mmio_base)); - hv_dev_close(context->fd); - - context->mmio_base = NULL; - context->fd = -1; - - return 0; -} - -EXPORT_SYMBOL_GPL(gxio_usb_host_destroy); - -void *gxio_usb_host_get_reg_start(gxio_usb_host_context_t *context) -{ - return context->mmio_base; -} - -EXPORT_SYMBOL_GPL(gxio_usb_host_get_reg_start); - -size_t gxio_usb_host_get_reg_len(gxio_usb_host_context_t *context) -{ - return HV_USB_HOST_MMIO_SIZE; -} - -EXPORT_SYMBOL_GPL(gxio_usb_host_get_reg_len); diff --git a/arch/tile/include/arch/mpipe.h b/arch/tile/include/arch/mpipe.h deleted file mode 100644 index 904538e754d8..000000000000 --- a/arch/tile/include/arch/mpipe.h +++ /dev/null @@ -1,371 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Machine-generated file; do not edit. */ - -#ifndef __ARCH_MPIPE_H__ -#define __ARCH_MPIPE_H__ - -#include <arch/abi.h> -#include <arch/mpipe_def.h> - -#ifndef __ASSEMBLER__ - -/* - * MMIO Ingress DMA Release Region Address. - * This is a description of the physical addresses used to manipulate ingress - * credit counters. Accesses to this address space should use an address of - * this form and a value like that specified in IDMA_RELEASE_REGION_VAL. - */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* Reserved. */ - uint_reg_t __reserved_0 : 3; - /* NotifRing to be released */ - uint_reg_t ring : 8; - /* Bucket to be released */ - uint_reg_t bucket : 13; - /* Enable NotifRing release */ - uint_reg_t ring_enable : 1; - /* Enable Bucket release */ - uint_reg_t bucket_enable : 1; - /* - * This field of the address selects the region (address space) to be - * accessed. For the iDMA release region, this field must be 4. - */ - uint_reg_t region : 3; - /* Reserved. */ - uint_reg_t __reserved_1 : 6; - /* This field of the address indexes the 32 entry service domain table. */ - uint_reg_t svc_dom : 5; - /* Reserved. */ - uint_reg_t __reserved_2 : 24; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved_2 : 24; - uint_reg_t svc_dom : 5; - uint_reg_t __reserved_1 : 6; - uint_reg_t region : 3; - uint_reg_t bucket_enable : 1; - uint_reg_t ring_enable : 1; - uint_reg_t bucket : 13; - uint_reg_t ring : 8; - uint_reg_t __reserved_0 : 3; -#endif - }; - - uint_reg_t word; -} MPIPE_IDMA_RELEASE_REGION_ADDR_t; - -/* - * MMIO Ingress DMA Release Region Value - Release NotifRing and/or Bucket. - * Provides release of the associated NotifRing. The address of the MMIO - * operation is described in IDMA_RELEASE_REGION_ADDR. - */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* - * Number of packets being released. The load balancer's count of - * inflight packets will be decremented by this amount for the associated - * Bucket and/or NotifRing - */ - uint_reg_t count : 16; - /* Reserved. */ - uint_reg_t __reserved : 48; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved : 48; - uint_reg_t count : 16; -#endif - }; - - uint_reg_t word; -} MPIPE_IDMA_RELEASE_REGION_VAL_t; - -/* - * MMIO Buffer Stack Manager Region Address. - * This MMIO region is used for posting or fetching buffers to/from the - * buffer stack manager. On an MMIO load, this pops a buffer descriptor from - * the top of stack if one is available. On an MMIO store, this pushes a - * buffer to the stack. The value read or written is described in - * BSM_REGION_VAL. - */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* Reserved. */ - uint_reg_t __reserved_0 : 3; - /* BufferStack being accessed. */ - uint_reg_t stack : 5; - /* Reserved. */ - uint_reg_t __reserved_1 : 18; - /* - * This field of the address selects the region (address space) to be - * accessed. For the buffer stack manager region, this field must be 6. - */ - uint_reg_t region : 3; - /* Reserved. */ - uint_reg_t __reserved_2 : 6; - /* This field of the address indexes the 32 entry service domain table. */ - uint_reg_t svc_dom : 5; - /* Reserved. */ - uint_reg_t __reserved_3 : 24; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved_3 : 24; - uint_reg_t svc_dom : 5; - uint_reg_t __reserved_2 : 6; - uint_reg_t region : 3; - uint_reg_t __reserved_1 : 18; - uint_reg_t stack : 5; - uint_reg_t __reserved_0 : 3; -#endif - }; - - uint_reg_t word; -} MPIPE_BSM_REGION_ADDR_t; - -/* - * MMIO Buffer Stack Manager Region Value. - * This MMIO region is used for posting or fetching buffers to/from the - * buffer stack manager. On an MMIO load, this pops a buffer descriptor from - * the top of stack if one is available. On an MMIO store, this pushes a - * buffer to the stack. The address of the MMIO operation is described in - * BSM_REGION_ADDR. - */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* Reserved. */ - uint_reg_t __reserved_0 : 7; - /* - * Base virtual address of the buffer. Must be sign extended by consumer. - */ - int_reg_t va : 35; - /* Reserved. */ - uint_reg_t __reserved_1 : 6; - /* - * Index of the buffer stack to which this buffer belongs. Ignored on - * writes since the offset bits specify the stack being accessed. - */ - uint_reg_t stack_idx : 5; - /* Reserved. */ - uint_reg_t __reserved_2 : 3; - /* - * Instance ID. For devices that support automatic buffer return between - * mPIPE instances, this field indicates the buffer owner. If the INST - * field does not match the mPIPE's instance number when a packet is - * egressed, buffers with HWB set will be returned to the other mPIPE - * instance. Note that not all devices support multi-mPIPE buffer - * return. The MPIPE_EDMA_INFO.REMOTE_BUFF_RTN_SUPPORT bit indicates - * whether the INST field in the buffer descriptor is populated by iDMA - * hardware. This field is ignored on writes. - */ - uint_reg_t inst : 2; - /* - * Reads as one to indicate that this is a hardware managed buffer. - * Ignored on writes since all buffers on a given stack are the same size. - */ - uint_reg_t hwb : 1; - /* - * Encoded size of buffer (ignored on writes): - * 0 = 128 bytes - * 1 = 256 bytes - * 2 = 512 bytes - * 3 = 1024 bytes - * 4 = 1664 bytes - * 5 = 4096 bytes - * 6 = 10368 bytes - * 7 = 16384 bytes - */ - uint_reg_t size : 3; - /* - * Valid indication for the buffer. Ignored on writes. - * 0 : Valid buffer descriptor popped from stack. - * 3 : Could not pop a buffer from the stack. Either the stack is empty, - * or the hardware's prefetch buffer is empty for this stack. - */ - uint_reg_t c : 2; -#else /* __BIG_ENDIAN__ */ - uint_reg_t c : 2; - uint_reg_t size : 3; - uint_reg_t hwb : 1; - uint_reg_t inst : 2; - uint_reg_t __reserved_2 : 3; - uint_reg_t stack_idx : 5; - uint_reg_t __reserved_1 : 6; - int_reg_t va : 35; - uint_reg_t __reserved_0 : 7; -#endif - }; - - uint_reg_t word; -} MPIPE_BSM_REGION_VAL_t; - -/* - * MMIO Egress DMA Post Region Address. - * Used to post descriptor locations to the eDMA descriptor engine. The - * value to be written is described in EDMA_POST_REGION_VAL - */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* Reserved. */ - uint_reg_t __reserved_0 : 3; - /* eDMA ring being accessed */ - uint_reg_t ring : 6; - /* Reserved. */ - uint_reg_t __reserved_1 : 17; - /* - * This field of the address selects the region (address space) to be - * accessed. For the egress DMA post region, this field must be 5. - */ - uint_reg_t region : 3; - /* Reserved. */ - uint_reg_t __reserved_2 : 6; - /* This field of the address indexes the 32 entry service domain table. */ - uint_reg_t svc_dom : 5; - /* Reserved. */ - uint_reg_t __reserved_3 : 24; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved_3 : 24; - uint_reg_t svc_dom : 5; - uint_reg_t __reserved_2 : 6; - uint_reg_t region : 3; - uint_reg_t __reserved_1 : 17; - uint_reg_t ring : 6; - uint_reg_t __reserved_0 : 3; -#endif - }; - - uint_reg_t word; -} MPIPE_EDMA_POST_REGION_ADDR_t; - -/* - * MMIO Egress DMA Post Region Value. - * Used to post descriptor locations to the eDMA descriptor engine. The - * address is described in EDMA_POST_REGION_ADDR. - */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* - * For writes, this specifies the current ring tail pointer prior to any - * post. For example, to post 1 or more descriptors starting at location - * 23, this would contain 23 (not 24). On writes, this index must be - * masked based on the ring size. The new tail pointer after this post - * is COUNT+RING_IDX (masked by the ring size). - * - * For reads, this provides the hardware descriptor fetcher's head - * pointer. The descriptors prior to the head pointer, however, may not - * yet have been processed so this indicator is only used to determine - * how full the ring is and if software may post more descriptors. - */ - uint_reg_t ring_idx : 16; - /* - * For writes, this specifies number of contiguous descriptors that are - * being posted. Software may post up to RingSize descriptors with a - * single MMIO store. A zero in this field on a write will "wake up" an - * eDMA ring and cause it fetch descriptors regardless of the hardware's - * current view of the state of the tail pointer. - * - * For reads, this field provides a rolling count of the number of - * descriptors that have been completely processed. This may be used by - * software to determine when buffers associated with a descriptor may be - * returned or reused. When the ring's flush bit is cleared by software - * (after having been set by HW or SW), the COUNT will be cleared. - */ - uint_reg_t count : 16; - /* - * For writes, this specifies the generation number of the tail being - * posted. Note that if tail+cnt wraps to the beginning of the ring, the - * eDMA hardware assumes that the descriptors posted at the beginning of - * the ring are also valid so it is okay to post around the wrap point. - * - * For reads, this is the current generation number. Valid descriptors - * will have the inverse of this generation number. - */ - uint_reg_t gen : 1; - /* Reserved. */ - uint_reg_t __reserved : 31; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved : 31; - uint_reg_t gen : 1; - uint_reg_t count : 16; - uint_reg_t ring_idx : 16; -#endif - }; - - uint_reg_t word; -} MPIPE_EDMA_POST_REGION_VAL_t; - -/* - * Load Balancer Bucket Status Data. - * Read/Write data for load balancer Bucket-Status Table. 4160 entries - * indexed by LBL_INIT_CTL.IDX when LBL_INIT_CTL.STRUCT_SEL is BSTS_TBL - */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* NotifRing currently assigned to this bucket. */ - uint_reg_t notifring : 8; - /* Current reference count. */ - uint_reg_t count : 16; - /* Group associated with this bucket. */ - uint_reg_t group : 5; - /* Mode select for this bucket. */ - uint_reg_t mode : 3; - /* Reserved. */ - uint_reg_t __reserved : 32; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved : 32; - uint_reg_t mode : 3; - uint_reg_t group : 5; - uint_reg_t count : 16; - uint_reg_t notifring : 8; -#endif - }; - - uint_reg_t word; -} MPIPE_LBL_INIT_DAT_BSTS_TBL_t; -#endif /* !defined(__ASSEMBLER__) */ - -#endif /* !defined(__ARCH_MPIPE_H__) */ diff --git a/arch/tile/include/arch/mpipe_constants.h b/arch/tile/include/arch/mpipe_constants.h deleted file mode 100644 index 84022ac5fe82..000000000000 --- a/arch/tile/include/arch/mpipe_constants.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - - -#ifndef __ARCH_MPIPE_CONSTANTS_H__ -#define __ARCH_MPIPE_CONSTANTS_H__ - -#define MPIPE_NUM_CLASSIFIERS 16 -#define MPIPE_CLS_MHZ 1200 - -#define MPIPE_NUM_EDMA_RINGS 64 - -#define MPIPE_NUM_SGMII_MACS 16 -#define MPIPE_NUM_XAUI_MACS 16 -#define MPIPE_NUM_LOOPBACK_CHANNELS 4 -#define MPIPE_NUM_NON_LB_CHANNELS 28 - -#define MPIPE_NUM_IPKT_BLOCKS 1536 - -#define MPIPE_NUM_BUCKETS 4160 - -#define MPIPE_NUM_NOTIF_RINGS 256 - -#define MPIPE_NUM_NOTIF_GROUPS 32 - -#define MPIPE_NUM_TLBS_PER_ASID 16 -#define MPIPE_TLB_IDX_WIDTH 4 - -#define MPIPE_MMIO_NUM_SVC_DOM 32 - -#endif /* __ARCH_MPIPE_CONSTANTS_H__ */ diff --git a/arch/tile/include/arch/mpipe_def.h b/arch/tile/include/arch/mpipe_def.h deleted file mode 100644 index c3d30217fc66..000000000000 --- a/arch/tile/include/arch/mpipe_def.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Machine-generated file; do not edit. */ - -#ifndef __ARCH_MPIPE_DEF_H__ -#define __ARCH_MPIPE_DEF_H__ -#define MPIPE_MMIO_ADDR__REGION_SHIFT 26 -#define MPIPE_MMIO_ADDR__REGION_VAL_CFG 0x0 -#define MPIPE_MMIO_ADDR__REGION_VAL_IDMA 0x4 -#define MPIPE_MMIO_ADDR__REGION_VAL_EDMA 0x5 -#define MPIPE_MMIO_ADDR__REGION_VAL_BSM 0x6 -#define MPIPE_BSM_REGION_VAL__VA_SHIFT 7 -#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_128 0x0 -#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_256 0x1 -#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_512 0x2 -#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_1024 0x3 -#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_1664 0x4 -#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_4096 0x5 -#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_10368 0x6 -#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_16384 0x7 -#define MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_DFA 0x0 -#define MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_FIXED 0x1 -#define MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_ALWAYS_PICK 0x2 -#define MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_STICKY 0x3 -#define MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_STICKY_RAND 0x7 -#define MPIPE_LBL_NR_STATE__FIRST_WORD 0x2138 -#endif /* !defined(__ARCH_MPIPE_DEF_H__) */ diff --git a/arch/tile/include/arch/mpipe_shm.h b/arch/tile/include/arch/mpipe_shm.h deleted file mode 100644 index 13b3c4300e50..000000000000 --- a/arch/tile/include/arch/mpipe_shm.h +++ /dev/null @@ -1,521 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Machine-generated file; do not edit. */ - - -#ifndef __ARCH_MPIPE_SHM_H__ -#define __ARCH_MPIPE_SHM_H__ - -#include <arch/abi.h> -#include <arch/mpipe_shm_def.h> - -#ifndef __ASSEMBLER__ -/** - * MPIPE eDMA Descriptor. - * The eDMA descriptor is written by software and consumed by hardware. It - * is used to specify the location of egress packet data to be sent out of - * the chip via one of the packet interfaces. - */ - -__extension__ -typedef union -{ - struct - { - /* Word 0 */ - -#ifndef __BIG_ENDIAN__ - /** - * Generation number. Used to indicate a valid descriptor in ring. When - * a new descriptor is written into the ring, software must toggle this - * bit. The net effect is that the GEN bit being written into new - * descriptors toggles each time the ring tail pointer wraps. - */ - uint_reg_t gen : 1; - /** - * For devices with EDMA reorder support, this field allows the - * descriptor to select the egress FIFO. The associated DMA ring must - * have ALLOW_EFIFO_SEL enabled. - */ - uint_reg_t efifo_sel : 6; - /** Reserved. Must be zero. */ - uint_reg_t r0 : 1; - /** Checksum generation enabled for this transfer. */ - uint_reg_t csum : 1; - /** - * Nothing to be sent. Used, for example, when software has dropped a - * packet but still wishes to return all of the associated buffers. - */ - uint_reg_t ns : 1; - /** - * Notification interrupt will be delivered when packet has been egressed. - */ - uint_reg_t notif : 1; - /** - * Boundary indicator. When 1, this transfer includes the EOP for this - * command. Must be clear on all but the last descriptor for an egress - * packet. - */ - uint_reg_t bound : 1; - /** Reserved. Must be zero. */ - uint_reg_t r1 : 4; - /** - * Number of bytes to be sent for this descriptor. When zero, no data - * will be moved and the buffer descriptor will be ignored. If the - * buffer descriptor indicates that it is chained, the low 7 bits of the - * VA indicate the offset within the first buffer (e.g. 127 bytes is the - * maximum offset into the first buffer). If the size exceeds a single - * buffer, subsequent buffer descriptors will be fetched prior to - * processing the next eDMA descriptor in the ring. - */ - uint_reg_t xfer_size : 14; - /** Reserved. Must be zero. */ - uint_reg_t r2 : 2; - /** - * Destination of checksum relative to CSUM_START relative to the first - * byte moved by this descriptor. Must be zero if CSUM=0 in this - * descriptor. Must be less than XFER_SIZE (e.g. the first byte of the - * CSUM_DEST must be within the span of this descriptor). - */ - uint_reg_t csum_dest : 8; - /** - * Start byte of checksum relative to the first byte moved by this - * descriptor. If this is not the first descriptor for the egress - * packet, CSUM_START is still relative to the first byte in this - * descriptor. Must be zero if CSUM=0 in this descriptor. - */ - uint_reg_t csum_start : 8; - /** - * Initial value for 16-bit 1's compliment checksum if enabled via CSUM. - * Specified in network order. That is, bits[7:0] will be added to the - * byte pointed to by CSUM_START and bits[15:8] will be added to the byte - * pointed to by CSUM_START+1 (with appropriate 1's compliment carries). - * Must be zero if CSUM=0 in this descriptor. - */ - uint_reg_t csum_seed : 16; -#else /* __BIG_ENDIAN__ */ - uint_reg_t csum_seed : 16; - uint_reg_t csum_start : 8; - uint_reg_t csum_dest : 8; - uint_reg_t r2 : 2; - uint_reg_t xfer_size : 14; - uint_reg_t r1 : 4; - uint_reg_t bound : 1; - uint_reg_t notif : 1; - uint_reg_t ns : 1; - uint_reg_t csum : 1; - uint_reg_t r0 : 1; - uint_reg_t efifo_sel : 6; - uint_reg_t gen : 1; -#endif - - /* Word 1 */ - -#ifndef __BIG_ENDIAN__ - /** Virtual address. Must be sign extended by consumer. */ - int_reg_t va : 42; - /** Reserved. */ - uint_reg_t __reserved_0 : 6; - /** Index of the buffer stack to which this buffer belongs. */ - uint_reg_t stack_idx : 5; - /** Reserved. */ - uint_reg_t __reserved_1 : 3; - /** - * Instance ID. For devices that support automatic buffer return between - * mPIPE instances, this field indicates the buffer owner. If the INST - * field does not match the mPIPE's instance number when a packet is - * egressed, buffers with HWB set will be returned to the other mPIPE - * instance. Note that not all devices support multi-mPIPE buffer - * return. The MPIPE_EDMA_INFO.REMOTE_BUFF_RTN_SUPPORT bit indicates - * whether the INST field in the buffer descriptor is populated by iDMA - * hardware. - */ - uint_reg_t inst : 2; - /** - * Always set to one by hardware in iDMA packet descriptors. For eDMA, - * indicates whether the buffer will be released to the buffer stack - * manager. When 0, software is responsible for releasing the buffer. - */ - uint_reg_t hwb : 1; - /** - * Encoded size of buffer. Set by the ingress hardware for iDMA packet - * descriptors. For eDMA descriptors, indicates the buffer size if .c - * indicates a chained packet. If an eDMA descriptor is not chained and - * the .hwb bit is not set, this field is ignored and the size is - * specified by the .xfer_size field. - * 0 = 128 bytes - * 1 = 256 bytes - * 2 = 512 bytes - * 3 = 1024 bytes - * 4 = 1664 bytes - * 5 = 4096 bytes - * 6 = 10368 bytes - * 7 = 16384 bytes - */ - uint_reg_t size : 3; - /** - * Chaining configuration for the buffer. Indicates that an ingress - * packet or egress command is chained across multiple buffers, with each - * buffer's size indicated by the .size field. - */ - uint_reg_t c : 2; -#else /* __BIG_ENDIAN__ */ - uint_reg_t c : 2; - uint_reg_t size : 3; - uint_reg_t hwb : 1; - uint_reg_t inst : 2; - uint_reg_t __reserved_1 : 3; - uint_reg_t stack_idx : 5; - uint_reg_t __reserved_0 : 6; - int_reg_t va : 42; -#endif - - }; - - /** Word access */ - uint_reg_t words[2]; -} MPIPE_EDMA_DESC_t; - -/** - * MPIPE Packet Descriptor. - * The packet descriptor is filled by the mPIPE's classification, - * load-balancing, and buffer management services. Some fields are consumed - * by mPIPE hardware, and others are consumed by Tile software. - */ - -__extension__ -typedef union -{ - struct - { - /* Word 0 */ - -#ifndef __BIG_ENDIAN__ - /** - * Notification ring into which this packet descriptor is written. - * Typically written by load balancer, but can be overridden by - * classification program if NR is asserted. - */ - uint_reg_t notif_ring : 8; - /** Source channel for this packet. Written by mPIPE DMA hardware. */ - uint_reg_t channel : 5; - /** Reserved. */ - uint_reg_t __reserved_0 : 1; - /** - * MAC Error. - * Generated by the MAC interface. Asserted if there was an overrun of - * the MAC's receive FIFO. This condition generally only occurs if the - * mPIPE clock is running too slowly. - */ - uint_reg_t me : 1; - /** - * Truncation Error. - * Written by the iDMA hardware. Asserted if packet was truncated due to - * insufficient space in iPkt buffer - */ - uint_reg_t tr : 1; - /** - * Written by the iDMA hardware. Indicates the number of bytes written - * to Tile memory. In general, this is the actual size of the packet as - * received from the MAC. But if the packet is truncated due to running - * out of buffers or due to the iPkt buffer filling up, then the L2_SIZE - * will be reduced to reflect the actual number of valid bytes written to - * Tile memory. - */ - uint_reg_t l2_size : 14; - /** - * CRC Error. - * Generated by the MAC. Asserted if MAC indicated an L2 CRC error or - * other L2 error (bad length etc.) on the packet. - */ - uint_reg_t ce : 1; - /** - * Cut Through. - * Written by the iDMA hardware. Asserted if packet was not completely - * received before being sent to classifier. L2_Size will indicate - * number of bytes received so far. - */ - uint_reg_t ct : 1; - /** - * Written by the classification program. Used by the load balancer to - * select the ring into which this packet descriptor is written. - */ - uint_reg_t bucket_id : 13; - /** Reserved. */ - uint_reg_t __reserved_1 : 3; - /** - * Checksum. - * Written by classification program. When 1, the checksum engine will - * perform checksum based on the CSUM_SEED, CSUM_START, and CSUM_BYTES - * fields. The result will be placed in CSUM_VAL. - */ - uint_reg_t cs : 1; - /** - * Notification Ring Select. - * Written by the classification program. When 1, the NotifRingIDX is - * set by classification program rather than being set by load balancer. - */ - uint_reg_t nr : 1; - /** - * Written by classification program. Indicates whether packet and - * descriptor should both be dropped, both be delivered, or only the - * descriptor should be delivered. - */ - uint_reg_t dest : 2; - /** - * General Purpose Sequence Number Enable. - * Written by the classification program. When 1, the GP_SQN_SEL field - * contains the sequence number selector and the GP_SQN field will be - * replaced with the associated sequence number. When clear, the GP_SQN - * field is left intact and be used as "Custom" bytes. - */ - uint_reg_t sq : 1; - /** - * TimeStamp Enable. - * Enable TimeStamp insertion. When clear, timestamp field may be filled - * with custom data by classifier. When set, hardware inserts the - * timestamp when the start of packet is received from the MAC. - */ - uint_reg_t ts : 1; - /** - * Packet Sequence Number Enable. - * Enable PacketSQN insertion. When clear, PacketSQN field may be filled - * with custom data by classifier. When set, hardware inserts the packet - * sequence number when the packet descriptor is written to a - * notification ring. - */ - uint_reg_t ps : 1; - /** - * Buffer Error. - * Written by the iDMA hardware. Asserted if iDMA ran out of buffers - * while writing the packet. Software must still return any buffer - * descriptors whose C field indicates a valid descriptor was consumed. - */ - uint_reg_t be : 1; - /** - * Written by the classification program. The associated counter is - * incremented when the packet is sent. - */ - uint_reg_t ctr0 : 5; - /** Reserved. */ - uint_reg_t __reserved_2 : 3; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved_2 : 3; - uint_reg_t ctr0 : 5; - uint_reg_t be : 1; - uint_reg_t ps : 1; - uint_reg_t ts : 1; - uint_reg_t sq : 1; - uint_reg_t dest : 2; - uint_reg_t nr : 1; - uint_reg_t cs : 1; - uint_reg_t __reserved_1 : 3; - uint_reg_t bucket_id : 13; - uint_reg_t ct : 1; - uint_reg_t ce : 1; - uint_reg_t l2_size : 14; - uint_reg_t tr : 1; - uint_reg_t me : 1; - uint_reg_t __reserved_0 : 1; - uint_reg_t channel : 5; - uint_reg_t notif_ring : 8; -#endif - - /* Word 1 */ - -#ifndef __BIG_ENDIAN__ - /** - * Written by the classification program. The associated counter is - * incremented when the packet is sent. - */ - uint_reg_t ctr1 : 5; - /** Reserved. */ - uint_reg_t __reserved_3 : 3; - /** - * Written by classification program. Indicates the start byte for - * checksum. Relative to 1st byte received from MAC. - */ - uint_reg_t csum_start : 8; - /** - * Checksum seed written by classification program. Overwritten with - * resultant checksum if CS bit is asserted. The endianness of the CSUM - * value bits when viewed by Tile software match the packet byte order. - * That is, bits[7:0] of the resulting checksum value correspond to - * earlier (more significant) bytes in the packet. To avoid classifier - * software from having to byte swap the CSUM_SEED, the iDMA checksum - * engine byte swaps the classifier's result before seeding the checksum - * calculation. Thus, the CSUM_START byte of packet data is added to - * bits[15:8] of the CSUM_SEED field generated by the classifier. This - * byte swap will be visible to Tile software if the CS bit is clear. - */ - uint_reg_t csum_seed_val : 16; - /** - * Written by the classification program. Not interpreted by mPIPE - * hardware. - */ - uint_reg_t custom0 : 32; -#else /* __BIG_ENDIAN__ */ - uint_reg_t custom0 : 32; - uint_reg_t csum_seed_val : 16; - uint_reg_t csum_start : 8; - uint_reg_t __reserved_3 : 3; - uint_reg_t ctr1 : 5; -#endif - - /* Word 2 */ - -#ifndef __BIG_ENDIAN__ - /** - * Written by the classification program. Not interpreted by mPIPE - * hardware. - */ - uint_reg_t custom1 : 64; -#else /* __BIG_ENDIAN__ */ - uint_reg_t custom1 : 64; -#endif - - /* Word 3 */ - -#ifndef __BIG_ENDIAN__ - /** - * Written by the classification program. Not interpreted by mPIPE - * hardware. - */ - uint_reg_t custom2 : 64; -#else /* __BIG_ENDIAN__ */ - uint_reg_t custom2 : 64; -#endif - - /* Word 4 */ - -#ifndef __BIG_ENDIAN__ - /** - * Written by the classification program. Not interpreted by mPIPE - * hardware. - */ - uint_reg_t custom3 : 64; -#else /* __BIG_ENDIAN__ */ - uint_reg_t custom3 : 64; -#endif - - /* Word 5 */ - -#ifndef __BIG_ENDIAN__ - /** - * Sequence number applied when packet is distributed. Classifier - * selects which sequence number is to be applied by writing the 13-bit - * SQN-selector into this field. For devices that support EXT_SQN (as - * indicated in IDMA_INFO.EXT_SQN_SUPPORT), the GP_SQN can be extended to - * 32-bits via the IDMA_CTL.EXT_SQN register. In this case the - * PACKET_SQN will be reduced to 32 bits. - */ - uint_reg_t gp_sqn : 16; - /** - * Written by notification hardware. The packet sequence number is - * incremented for each packet that wasn't dropped. - */ - uint_reg_t packet_sqn : 48; -#else /* __BIG_ENDIAN__ */ - uint_reg_t packet_sqn : 48; - uint_reg_t gp_sqn : 16; -#endif - - /* Word 6 */ - -#ifndef __BIG_ENDIAN__ - /** - * Written by hardware when the start-of-packet is received by the mPIPE - * from the MAC. This is the nanoseconds part of the packet timestamp. - */ - uint_reg_t time_stamp_ns : 32; - /** - * Written by hardware when the start-of-packet is received by the mPIPE - * from the MAC. This is the seconds part of the packet timestamp. - */ - uint_reg_t time_stamp_sec : 32; -#else /* __BIG_ENDIAN__ */ - uint_reg_t time_stamp_sec : 32; - uint_reg_t time_stamp_ns : 32; -#endif - - /* Word 7 */ - -#ifndef __BIG_ENDIAN__ - /** Virtual address. Must be sign extended by consumer. */ - int_reg_t va : 42; - /** Reserved. */ - uint_reg_t __reserved_4 : 6; - /** Index of the buffer stack to which this buffer belongs. */ - uint_reg_t stack_idx : 5; - /** Reserved. */ - uint_reg_t __reserved_5 : 3; - /** - * Instance ID. For devices that support automatic buffer return between - * mPIPE instances, this field indicates the buffer owner. If the INST - * field does not match the mPIPE's instance number when a packet is - * egressed, buffers with HWB set will be returned to the other mPIPE - * instance. Note that not all devices support multi-mPIPE buffer - * return. The MPIPE_EDMA_INFO.REMOTE_BUFF_RTN_SUPPORT bit indicates - * whether the INST field in the buffer descriptor is populated by iDMA - * hardware. - */ - uint_reg_t inst : 2; - /** - * Always set to one by hardware in iDMA packet descriptors. For eDMA, - * indicates whether the buffer will be released to the buffer stack - * manager. When 0, software is responsible for releasing the buffer. - */ - uint_reg_t hwb : 1; - /** - * Encoded size of buffer. Set by the ingress hardware for iDMA packet - * descriptors. For eDMA descriptors, indicates the buffer size if .c - * indicates a chained packet. If an eDMA descriptor is not chained and - * the .hwb bit is not set, this field is ignored and the size is - * specified by the .xfer_size field. - * 0 = 128 bytes - * 1 = 256 bytes - * 2 = 512 bytes - * 3 = 1024 bytes - * 4 = 1664 bytes - * 5 = 4096 bytes - * 6 = 10368 bytes - * 7 = 16384 bytes - */ - uint_reg_t size : 3; - /** - * Chaining configuration for the buffer. Indicates that an ingress - * packet or egress command is chained across multiple buffers, with each - * buffer's size indicated by the .size field. - */ - uint_reg_t c : 2; -#else /* __BIG_ENDIAN__ */ - uint_reg_t c : 2; - uint_reg_t size : 3; - uint_reg_t hwb : 1; - uint_reg_t inst : 2; - uint_reg_t __reserved_5 : 3; - uint_reg_t stack_idx : 5; - uint_reg_t __reserved_4 : 6; - int_reg_t va : 42; -#endif - - }; - - /** Word access */ - uint_reg_t words[8]; -} MPIPE_PDESC_t; -#endif /* !defined(__ASSEMBLER__) */ - -#endif /* !defined(__ARCH_MPIPE_SHM_H__) */ diff --git a/arch/tile/include/arch/mpipe_shm_def.h b/arch/tile/include/arch/mpipe_shm_def.h deleted file mode 100644 index 6124d39c8318..000000000000 --- a/arch/tile/include/arch/mpipe_shm_def.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Machine-generated file; do not edit. */ - -#ifndef __ARCH_MPIPE_SHM_DEF_H__ -#define __ARCH_MPIPE_SHM_DEF_H__ -#define MPIPE_EDMA_DESC_WORD1__C_VAL_UNCHAINED 0x0 -#define MPIPE_EDMA_DESC_WORD1__C_VAL_CHAINED 0x1 -#define MPIPE_EDMA_DESC_WORD1__C_VAL_NOT_RDY 0x2 -#define MPIPE_EDMA_DESC_WORD1__C_VAL_INVALID 0x3 -#endif /* !defined(__ARCH_MPIPE_SHM_DEF_H__) */ diff --git a/arch/tile/include/arch/spr_def.h b/arch/tile/include/arch/spr_def.h deleted file mode 100644 index 2de83e7aff3e..000000000000 --- a/arch/tile/include/arch/spr_def.h +++ /dev/null @@ -1,109 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ -#ifndef __ARCH_SPR_DEF_H__ -#define __ARCH_SPR_DEF_H__ - -#include <uapi/arch/spr_def.h> - - -/* - * In addition to including the proper base SPR definition file, depending - * on machine architecture, this file defines several macros which allow - * kernel code to use protection-level dependent SPRs without worrying - * about which PL it's running at. In these macros, the PL that the SPR - * or interrupt number applies to is replaced by K. - */ - -#if CONFIG_KERNEL_PL != 1 && CONFIG_KERNEL_PL != 2 -#error CONFIG_KERNEL_PL must be 1 or 2 -#endif - -/* Concatenate 4 strings. */ -#define __concat4(a, b, c, d) a ## b ## c ## d -#define _concat4(a, b, c, d) __concat4(a, b, c, d) - -#ifdef __tilegx__ - -/* TILE-Gx dependent, protection-level dependent SPRs. */ - -#define SPR_INTERRUPT_MASK_K \ - _concat4(SPR_INTERRUPT_MASK_, CONFIG_KERNEL_PL,,) -#define SPR_INTERRUPT_MASK_SET_K \ - _concat4(SPR_INTERRUPT_MASK_SET_, CONFIG_KERNEL_PL,,) -#define SPR_INTERRUPT_MASK_RESET_K \ - _concat4(SPR_INTERRUPT_MASK_RESET_, CONFIG_KERNEL_PL,,) -#define SPR_INTERRUPT_VECTOR_BASE_K \ - _concat4(SPR_INTERRUPT_VECTOR_BASE_, CONFIG_KERNEL_PL,,) - -#define SPR_IPI_MASK_K \ - _concat4(SPR_IPI_MASK_, CONFIG_KERNEL_PL,,) -#define SPR_IPI_MASK_RESET_K \ - _concat4(SPR_IPI_MASK_RESET_, CONFIG_KERNEL_PL,,) -#define SPR_IPI_MASK_SET_K \ - _concat4(SPR_IPI_MASK_SET_, CONFIG_KERNEL_PL,,) -#define SPR_IPI_EVENT_K \ - _concat4(SPR_IPI_EVENT_, CONFIG_KERNEL_PL,,) -#define SPR_IPI_EVENT_RESET_K \ - _concat4(SPR_IPI_EVENT_RESET_, CONFIG_KERNEL_PL,,) -#define SPR_IPI_EVENT_SET_K \ - _concat4(SPR_IPI_EVENT_SET_, CONFIG_KERNEL_PL,,) -#define INT_IPI_K \ - _concat4(INT_IPI_, CONFIG_KERNEL_PL,,) - -#define SPR_SINGLE_STEP_CONTROL_K \ - _concat4(SPR_SINGLE_STEP_CONTROL_, CONFIG_KERNEL_PL,,) -#define SPR_SINGLE_STEP_EN_K_K \ - _concat4(SPR_SINGLE_STEP_EN_, CONFIG_KERNEL_PL, _, CONFIG_KERNEL_PL) -#define INT_SINGLE_STEP_K \ - _concat4(INT_SINGLE_STEP_, CONFIG_KERNEL_PL,,) - -#else - -/* TILEPro dependent, protection-level dependent SPRs. */ - -#define SPR_INTERRUPT_MASK_K_0 \ - _concat4(SPR_INTERRUPT_MASK_, CONFIG_KERNEL_PL, _0,) -#define SPR_INTERRUPT_MASK_K_1 \ - _concat4(SPR_INTERRUPT_MASK_, CONFIG_KERNEL_PL, _1,) -#define SPR_INTERRUPT_MASK_SET_K_0 \ - _concat4(SPR_INTERRUPT_MASK_SET_, CONFIG_KERNEL_PL, _0,) -#define SPR_INTERRUPT_MASK_SET_K_1 \ - _concat4(SPR_INTERRUPT_MASK_SET_, CONFIG_KERNEL_PL, _1,) -#define SPR_INTERRUPT_MASK_RESET_K_0 \ - _concat4(SPR_INTERRUPT_MASK_RESET_, CONFIG_KERNEL_PL, _0,) -#define SPR_INTERRUPT_MASK_RESET_K_1 \ - _concat4(SPR_INTERRUPT_MASK_RESET_, CONFIG_KERNEL_PL, _1,) - -#endif - -/* Generic protection-level dependent SPRs. */ - -#define SPR_SYSTEM_SAVE_K_0 \ - _concat4(SPR_SYSTEM_SAVE_, CONFIG_KERNEL_PL, _0,) -#define SPR_SYSTEM_SAVE_K_1 \ - _concat4(SPR_SYSTEM_SAVE_, CONFIG_KERNEL_PL, _1,) -#define SPR_SYSTEM_SAVE_K_2 \ - _concat4(SPR_SYSTEM_SAVE_, CONFIG_KERNEL_PL, _2,) -#define SPR_SYSTEM_SAVE_K_3 \ - _concat4(SPR_SYSTEM_SAVE_, CONFIG_KERNEL_PL, _3,) -#define SPR_EX_CONTEXT_K_0 \ - _concat4(SPR_EX_CONTEXT_, CONFIG_KERNEL_PL, _0,) -#define SPR_EX_CONTEXT_K_1 \ - _concat4(SPR_EX_CONTEXT_, CONFIG_KERNEL_PL, _1,) -#define SPR_INTCTRL_K_STATUS \ - _concat4(SPR_INTCTRL_, CONFIG_KERNEL_PL, _STATUS,) -#define INT_INTCTRL_K \ - _concat4(INT_INTCTRL_, CONFIG_KERNEL_PL,,) - -#endif /* __ARCH_SPR_DEF_H__ */ diff --git a/arch/tile/include/arch/trio.h b/arch/tile/include/arch/trio.h deleted file mode 100644 index c0ddedcae085..000000000000 --- a/arch/tile/include/arch/trio.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Machine-generated file; do not edit. */ - -#ifndef __ARCH_TRIO_H__ -#define __ARCH_TRIO_H__ - -#include <arch/abi.h> -#include <arch/trio_def.h> - -#ifndef __ASSEMBLER__ - -/* - * Map SQ Doorbell Format. - * This describes the format of the write-only doorbell register that exists - * in the last 8-bytes of the MAP_SQ_BASE/LIM range. This register is only - * writable from PCIe space. Writes to this register will not be written to - * Tile memory space and thus no IO VA translation is required if the last - * page of the BASE/LIM range is not otherwise written. - */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* - * When written with a 1, the associated MAP_SQ region's doorbell - * interrupt will be triggered once all previous writes are visible to - * Tile software. - */ - uint_reg_t doorbell : 1; - /* - * When written with a 1, the descriptor at the head of the associated - * MAP_SQ's FIFO will be dequeued. - */ - uint_reg_t pop : 1; - /* Reserved. */ - uint_reg_t __reserved : 62; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved : 62; - uint_reg_t pop : 1; - uint_reg_t doorbell : 1; -#endif - }; - - uint_reg_t word; -} TRIO_MAP_SQ_DOORBELL_FMT_t; - - -/* - * Tile PIO Region Configuration - CFG Address Format. - * This register describes the address format for PIO accesses when the - * associated region is setup with TYPE=CFG. - */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* Register Address (full byte address). */ - uint_reg_t reg_addr : 12; - /* Function Number */ - uint_reg_t fn : 3; - /* Device Number */ - uint_reg_t dev : 5; - /* BUS Number */ - uint_reg_t bus : 8; - /* Config Type: 0 for access to directly-attached device. 1 otherwise. */ - uint_reg_t type : 1; - /* Reserved. */ - uint_reg_t __reserved_0 : 1; - /* - * MAC select. This must match the configuration in - * TILE_PIO_REGION_SETUP.MAC. - */ - uint_reg_t mac : 2; - /* Reserved. */ - uint_reg_t __reserved_1 : 32; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved_1 : 32; - uint_reg_t mac : 2; - uint_reg_t __reserved_0 : 1; - uint_reg_t type : 1; - uint_reg_t bus : 8; - uint_reg_t dev : 5; - uint_reg_t fn : 3; - uint_reg_t reg_addr : 12; -#endif - }; - - uint_reg_t word; -} TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR_t; -#endif /* !defined(__ASSEMBLER__) */ - -#endif /* !defined(__ARCH_TRIO_H__) */ diff --git a/arch/tile/include/arch/trio_constants.h b/arch/tile/include/arch/trio_constants.h deleted file mode 100644 index 85647e91a458..000000000000 --- a/arch/tile/include/arch/trio_constants.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - - -#ifndef __ARCH_TRIO_CONSTANTS_H__ -#define __ARCH_TRIO_CONSTANTS_H__ - -#define TRIO_NUM_ASIDS 32 -#define TRIO_NUM_TLBS_PER_ASID 16 - -#define TRIO_NUM_TPIO_REGIONS 8 -#define TRIO_LOG2_NUM_TPIO_REGIONS 3 - -#define TRIO_NUM_MAP_MEM_REGIONS 32 -#define TRIO_LOG2_NUM_MAP_MEM_REGIONS 5 -#define TRIO_NUM_MAP_SQ_REGIONS 8 -#define TRIO_LOG2_NUM_MAP_SQ_REGIONS 3 - -#define TRIO_LOG2_NUM_SQ_FIFO_ENTRIES 6 - -#define TRIO_NUM_PUSH_DMA_RINGS 64 - -#define TRIO_NUM_PULL_DMA_RINGS 64 - -#endif /* __ARCH_TRIO_CONSTANTS_H__ */ diff --git a/arch/tile/include/arch/trio_def.h b/arch/tile/include/arch/trio_def.h deleted file mode 100644 index e80500317dc4..000000000000 --- a/arch/tile/include/arch/trio_def.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Machine-generated file; do not edit. */ - -#ifndef __ARCH_TRIO_DEF_H__ -#define __ARCH_TRIO_DEF_H__ -#define TRIO_CFG_REGION_ADDR__REG_SHIFT 0 -#define TRIO_CFG_REGION_ADDR__INTFC_SHIFT 16 -#define TRIO_CFG_REGION_ADDR__INTFC_VAL_TRIO 0x0 -#define TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE 0x1 -#define TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD 0x2 -#define TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_PROTECTED 0x3 -#define TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT 18 -#define TRIO_CFG_REGION_ADDR__PROT_SHIFT 20 -#define TRIO_PIO_REGIONS_ADDR__REGION_SHIFT 32 -#define TRIO_MAP_MEM_REG_INT0 0x1000000000 -#define TRIO_MAP_MEM_REG_INT1 0x1000000008 -#define TRIO_MAP_MEM_REG_INT2 0x1000000010 -#define TRIO_MAP_MEM_REG_INT3 0x1000000018 -#define TRIO_MAP_MEM_REG_INT4 0x1000000020 -#define TRIO_MAP_MEM_REG_INT5 0x1000000028 -#define TRIO_MAP_MEM_REG_INT6 0x1000000030 -#define TRIO_MAP_MEM_REG_INT7 0x1000000038 -#define TRIO_MAP_MEM_LIM__ADDR_SHIFT 12 -#define TRIO_MAP_MEM_SETUP__ORDER_MODE_VAL_UNORDERED 0x0 -#define TRIO_MAP_MEM_SETUP__ORDER_MODE_VAL_STRICT 0x1 -#define TRIO_MAP_MEM_SETUP__ORDER_MODE_VAL_REL_ORD 0x2 -#define TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT 30 -#endif /* !defined(__ARCH_TRIO_DEF_H__) */ diff --git a/arch/tile/include/arch/trio_pcie_intfc.h b/arch/tile/include/arch/trio_pcie_intfc.h deleted file mode 100644 index 0487fdb9d581..000000000000 --- a/arch/tile/include/arch/trio_pcie_intfc.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Machine-generated file; do not edit. */ - -#ifndef __ARCH_TRIO_PCIE_INTFC_H__ -#define __ARCH_TRIO_PCIE_INTFC_H__ - -#include <arch/abi.h> -#include <arch/trio_pcie_intfc_def.h> - -#ifndef __ASSEMBLER__ - -/* - * Port Configuration. - * Configuration of the PCIe Port - */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* Provides the state of the strapping pins for this port. */ - uint_reg_t strap_state : 3; - /* Reserved. */ - uint_reg_t __reserved_0 : 1; - /* - * When 1, the device type will be overridden using OVD_DEV_TYPE_VAL. - * When 0, the device type is determined based on the STRAP_STATE. - */ - uint_reg_t ovd_dev_type : 1; - /* Provides the device type when OVD_DEV_TYPE is 1. */ - uint_reg_t ovd_dev_type_val : 4; - /* Determines how link is trained. */ - uint_reg_t train_mode : 2; - /* Reserved. */ - uint_reg_t __reserved_1 : 1; - /* - * For PCIe, used to flip physical RX lanes that were not properly wired. - * This is not the same as lane reversal which is handled automatically - * during link training. When 0, RX Lane0 must be wired to the link - * partner (either to its Lane0 or it's LaneN). When RX_LANE_FLIP is 1, - * the highest numbered lane for this port becomes Lane0 and Lane0 does - * NOT have to be wired to the link partner. - */ - uint_reg_t rx_lane_flip : 1; - /* - * For PCIe, used to flip physical TX lanes that were not properly wired. - * This is not the same as lane reversal which is handled automatically - * during link training. When 0, TX Lane0 must be wired to the link - * partner (either to its Lane0 or it's LaneN). When TX_LANE_FLIP is 1, - * the highest numbered lane for this port becomes Lane0 and Lane0 does - * NOT have to be wired to the link partner. - */ - uint_reg_t tx_lane_flip : 1; - /* - * For StreamIO port, configures the width of the port when TRAIN_MODE is - * not STRAP. - */ - uint_reg_t stream_width : 2; - /* - * For StreamIO port, configures the rate of the port when TRAIN_MODE is - * not STRAP. - */ - uint_reg_t stream_rate : 2; - /* Reserved. */ - uint_reg_t __reserved_2 : 46; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved_2 : 46; - uint_reg_t stream_rate : 2; - uint_reg_t stream_width : 2; - uint_reg_t tx_lane_flip : 1; - uint_reg_t rx_lane_flip : 1; - uint_reg_t __reserved_1 : 1; - uint_reg_t train_mode : 2; - uint_reg_t ovd_dev_type_val : 4; - uint_reg_t ovd_dev_type : 1; - uint_reg_t __reserved_0 : 1; - uint_reg_t strap_state : 3; -#endif - }; - - uint_reg_t word; -} TRIO_PCIE_INTFC_PORT_CONFIG_t; - -/* - * Port Status. - * Status of the PCIe Port. This register applies to the StreamIO port when - * StreamIO is enabled. - */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* - * Indicates the DL state of the port. When 1, the port is up and ready - * to receive traffic. - */ - uint_reg_t dl_up : 1; - /* - * Indicates the number of times the link has gone down. Clears on read. - */ - uint_reg_t dl_down_cnt : 7; - /* Indicates the SERDES PLL has spun up and is providing a valid clock. */ - uint_reg_t clock_ready : 1; - /* Reserved. */ - uint_reg_t __reserved_0 : 7; - /* Device revision ID. */ - uint_reg_t device_rev : 8; - /* Link state (PCIe). */ - uint_reg_t ltssm_state : 6; - /* Link power management state (PCIe). */ - uint_reg_t pm_state : 3; - /* Reserved. */ - uint_reg_t __reserved_1 : 31; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved_1 : 31; - uint_reg_t pm_state : 3; - uint_reg_t ltssm_state : 6; - uint_reg_t device_rev : 8; - uint_reg_t __reserved_0 : 7; - uint_reg_t clock_ready : 1; - uint_reg_t dl_down_cnt : 7; - uint_reg_t dl_up : 1; -#endif - }; - - uint_reg_t word; -} TRIO_PCIE_INTFC_PORT_STATUS_t; - -/* - * Transmit FIFO Control. - * Contains TX FIFO thresholds. These registers are for diagnostics purposes - * only. Changing these values causes undefined behavior. - */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* - * Almost-Empty level for TX0 data. Typically set to at least - * roundup(38.0*M/N) where N=tclk frequency and M=MAC symbol rate in MHz - * for a x4 port (250MHz). - */ - uint_reg_t tx0_data_ae_lvl : 7; - /* Reserved. */ - uint_reg_t __reserved_0 : 1; - /* Almost-Empty level for TX1 data. */ - uint_reg_t tx1_data_ae_lvl : 7; - /* Reserved. */ - uint_reg_t __reserved_1 : 1; - /* Almost-Full level for TX0 data. */ - uint_reg_t tx0_data_af_lvl : 7; - /* Reserved. */ - uint_reg_t __reserved_2 : 1; - /* Almost-Full level for TX1 data. */ - uint_reg_t tx1_data_af_lvl : 7; - /* Reserved. */ - uint_reg_t __reserved_3 : 1; - /* Almost-Full level for TX0 info. */ - uint_reg_t tx0_info_af_lvl : 5; - /* Reserved. */ - uint_reg_t __reserved_4 : 3; - /* Almost-Full level for TX1 info. */ - uint_reg_t tx1_info_af_lvl : 5; - /* Reserved. */ - uint_reg_t __reserved_5 : 3; - /* - * This register provides performance adjustment for high bandwidth - * flows. The MAC will assert almost-full to TRIO if non-posted credits - * fall below this level. Note that setting this larger than the initial - * PORT_CREDIT.NPH value will cause READS to never be sent. If the - * initial credit value from the link partner is smaller than this value - * when the link comes up, the value will be reset to the initial credit - * value to prevent lockup. - */ - uint_reg_t min_np_credits : 8; - /* - * This register provides performance adjustment for high bandwidth - * flows. The MAC will assert almost-full to TRIO if posted credits fall - * below this level. Note that setting this larger than the initial - * PORT_CREDIT.PH value will cause WRITES to never be sent. If the - * initial credit value from the link partner is smaller than this value - * when the link comes up, the value will be reset to the initial credit - * value to prevent lockup. - */ - uint_reg_t min_p_credits : 8; -#else /* __BIG_ENDIAN__ */ - uint_reg_t min_p_credits : 8; - uint_reg_t min_np_credits : 8; - uint_reg_t __reserved_5 : 3; - uint_reg_t tx1_info_af_lvl : 5; - uint_reg_t __reserved_4 : 3; - uint_reg_t tx0_info_af_lvl : 5; - uint_reg_t __reserved_3 : 1; - uint_reg_t tx1_data_af_lvl : 7; - uint_reg_t __reserved_2 : 1; - uint_reg_t tx0_data_af_lvl : 7; - uint_reg_t __reserved_1 : 1; - uint_reg_t tx1_data_ae_lvl : 7; - uint_reg_t __reserved_0 : 1; - uint_reg_t tx0_data_ae_lvl : 7; -#endif - }; - - uint_reg_t word; -} TRIO_PCIE_INTFC_TX_FIFO_CTL_t; -#endif /* !defined(__ASSEMBLER__) */ - -#endif /* !defined(__ARCH_TRIO_PCIE_INTFC_H__) */ diff --git a/arch/tile/include/arch/trio_pcie_intfc_def.h b/arch/tile/include/arch/trio_pcie_intfc_def.h deleted file mode 100644 index d3fd6781fb24..000000000000 --- a/arch/tile/include/arch/trio_pcie_intfc_def.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Machine-generated file; do not edit. */ - -#ifndef __ARCH_TRIO_PCIE_INTFC_DEF_H__ -#define __ARCH_TRIO_PCIE_INTFC_DEF_H__ -#define TRIO_PCIE_INTFC_MAC_INT_STS 0x0000 -#define TRIO_PCIE_INTFC_MAC_INT_STS__INT_LEVEL_MASK 0xf000 -#define TRIO_PCIE_INTFC_PORT_CONFIG 0x0018 -#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_DISABLED 0x0 -#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT 0x1 -#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC 0x2 -#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT_G1 0x3 -#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC_G1 0x4 -#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_XLINK 0x5 -#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_STREAM_X1 0x6 -#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_STREAM_X4 0x7 -#define TRIO_PCIE_INTFC_PORT_STATUS 0x0020 -#define TRIO_PCIE_INTFC_TX_FIFO_CTL 0x0050 -#endif /* !defined(__ARCH_TRIO_PCIE_INTFC_DEF_H__) */ diff --git a/arch/tile/include/arch/trio_pcie_rc.h b/arch/tile/include/arch/trio_pcie_rc.h deleted file mode 100644 index 6a25d0aca857..000000000000 --- a/arch/tile/include/arch/trio_pcie_rc.h +++ /dev/null @@ -1,156 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Machine-generated file; do not edit. */ - -#ifndef __ARCH_TRIO_PCIE_RC_H__ -#define __ARCH_TRIO_PCIE_RC_H__ - -#include <arch/abi.h> -#include <arch/trio_pcie_rc_def.h> - -#ifndef __ASSEMBLER__ - -/* Device Capabilities Register. */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* - * Max_Payload_Size Supported, writablethrough the MAC_STANDARD interface - */ - uint_reg_t mps_sup : 3; - /* - * This field is writable through the MAC_STANDARD interface. However, - * Phantom Function is not supported. Therefore, the application must - * not write any value other than 0x0 to this field. - */ - uint_reg_t phantom_function_supported : 2; - /* This bit is writable through the MAC_STANDARD interface. */ - uint_reg_t ext_tag_field_supported : 1; - /* Reserved. */ - uint_reg_t __reserved_0 : 3; - /* Endpoint L1 Acceptable Latency Must be 0x0 for non-Endpoint devices. */ - uint_reg_t l1_lat : 3; - /* - * Undefined since PCI Express 1.1 (Was Attention Button Present for PCI - * Express 1.0a) - */ - uint_reg_t r1 : 1; - /* - * Undefined since PCI Express 1.1 (Was Attention Indicator Present for - * PCI Express 1.0a) - */ - uint_reg_t r2 : 1; - /* - * Undefined since PCI Express 1.1 (Was Power Indicator Present for PCI - * Express 1.0a) - */ - uint_reg_t r3 : 1; - /* - * Role-Based Error Reporting, writable through the MAC_STANDARD - * interface. Required to be set for device compliant to 1.1 spec and - * later. - */ - uint_reg_t rer : 1; - /* Reserved. */ - uint_reg_t __reserved_1 : 2; - /* Captured Slot Power Limit Value Upstream port only. */ - uint_reg_t slot_pwr_lim : 8; - /* Captured Slot Power Limit Scale Upstream port only. */ - uint_reg_t slot_pwr_scale : 2; - /* Reserved. */ - uint_reg_t __reserved_2 : 4; - /* Endpoint L0s Acceptable LatencyMust be 0x0 for non-Endpoint devices. */ - uint_reg_t l0s_lat : 1; - /* Reserved. */ - uint_reg_t __reserved_3 : 31; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved_3 : 31; - uint_reg_t l0s_lat : 1; - uint_reg_t __reserved_2 : 4; - uint_reg_t slot_pwr_scale : 2; - uint_reg_t slot_pwr_lim : 8; - uint_reg_t __reserved_1 : 2; - uint_reg_t rer : 1; - uint_reg_t r3 : 1; - uint_reg_t r2 : 1; - uint_reg_t r1 : 1; - uint_reg_t l1_lat : 3; - uint_reg_t __reserved_0 : 3; - uint_reg_t ext_tag_field_supported : 1; - uint_reg_t phantom_function_supported : 2; - uint_reg_t mps_sup : 3; -#endif - }; - - uint_reg_t word; -} TRIO_PCIE_RC_DEVICE_CAP_t; - -/* Device Control Register. */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* Correctable Error Reporting Enable */ - uint_reg_t cor_err_ena : 1; - /* Non-Fatal Error Reporting Enable */ - uint_reg_t nf_err_ena : 1; - /* Fatal Error Reporting Enable */ - uint_reg_t fatal_err_ena : 1; - /* Unsupported Request Reporting Enable */ - uint_reg_t ur_ena : 1; - /* Relaxed orderring enable */ - uint_reg_t ro_ena : 1; - /* Max Payload Size */ - uint_reg_t max_payload_size : 3; - /* Extended Tag Field Enable */ - uint_reg_t ext_tag : 1; - /* Phantom Function Enable */ - uint_reg_t ph_fn_ena : 1; - /* AUX Power PM Enable */ - uint_reg_t aux_pm_ena : 1; - /* Enable NoSnoop */ - uint_reg_t no_snoop : 1; - /* Max read request size */ - uint_reg_t max_read_req_sz : 3; - /* Reserved. */ - uint_reg_t __reserved : 49; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved : 49; - uint_reg_t max_read_req_sz : 3; - uint_reg_t no_snoop : 1; - uint_reg_t aux_pm_ena : 1; - uint_reg_t ph_fn_ena : 1; - uint_reg_t ext_tag : 1; - uint_reg_t max_payload_size : 3; - uint_reg_t ro_ena : 1; - uint_reg_t ur_ena : 1; - uint_reg_t fatal_err_ena : 1; - uint_reg_t nf_err_ena : 1; - uint_reg_t cor_err_ena : 1; -#endif - }; - - uint_reg_t word; -} TRIO_PCIE_RC_DEVICE_CONTROL_t; -#endif /* !defined(__ASSEMBLER__) */ - -#endif /* !defined(__ARCH_TRIO_PCIE_RC_H__) */ diff --git a/arch/tile/include/arch/trio_pcie_rc_def.h b/arch/tile/include/arch/trio_pcie_rc_def.h deleted file mode 100644 index 74081a65b6f2..000000000000 --- a/arch/tile/include/arch/trio_pcie_rc_def.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Machine-generated file; do not edit. */ - -#ifndef __ARCH_TRIO_PCIE_RC_DEF_H__ -#define __ARCH_TRIO_PCIE_RC_DEF_H__ -#define TRIO_PCIE_RC_DEVICE_CAP 0x0074 -#define TRIO_PCIE_RC_DEVICE_CONTROL 0x0078 -#define TRIO_PCIE_RC_DEVICE_ID_VEN_ID 0x0000 -#define TRIO_PCIE_RC_DEVICE_ID_VEN_ID__DEV_ID_SHIFT 16 -#define TRIO_PCIE_RC_REVISION_ID 0x0008 -#endif /* !defined(__ARCH_TRIO_PCIE_RC_DEF_H__) */ diff --git a/arch/tile/include/arch/trio_shm.h b/arch/tile/include/arch/trio_shm.h deleted file mode 100644 index 3382e38245af..000000000000 --- a/arch/tile/include/arch/trio_shm.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Machine-generated file; do not edit. */ - - -#ifndef __ARCH_TRIO_SHM_H__ -#define __ARCH_TRIO_SHM_H__ - -#include <arch/abi.h> -#include <arch/trio_shm_def.h> - -#ifndef __ASSEMBLER__ -/** - * TRIO DMA Descriptor. - * The TRIO DMA descriptor is written by software and consumed by hardware. - * It is used to specify the location of transaction data in the IO and Tile - * domains. - */ - -__extension__ -typedef union -{ - struct - { - /* Word 0 */ - -#ifndef __BIG_ENDIAN__ - /** Tile side virtual address. */ - int_reg_t va : 42; - /** - * Encoded size of buffer used on push DMA when C=1: - * 0 = 128 bytes - * 1 = 256 bytes - * 2 = 512 bytes - * 3 = 1024 bytes - * 4 = 1664 bytes - * 5 = 4096 bytes - * 6 = 10368 bytes - * 7 = 16384 bytes - */ - uint_reg_t bsz : 3; - /** - * Chaining designation. Always zero for pull DMA - * 0 : Unchained buffer pointer - * 1 : Chained buffer pointer. Next buffer descriptor (e.g. VA) stored - * in 1st 8-bytes in buffer. For chained buffers, first 8-bytes of each - * buffer contain the next buffer descriptor formatted exactly like a PDE - * buffer descriptor. This allows a chained PDE buffer to be sent using - * push DMA. - */ - uint_reg_t c : 1; - /** - * Notification interrupt will be delivered when the transaction has - * completed (all data has been read from or written to the Tile-side - * buffer). - */ - uint_reg_t notif : 1; - /** - * When 0, the XSIZE field specifies the total byte count for the - * transaction. When 1, the XSIZE field is encoded as 2^(N+14) for N in - * {0..6}: - * 0 = 16KB - * 1 = 32KB - * 2 = 64KB - * 3 = 128KB - * 4 = 256KB - * 5 = 512KB - * 6 = 1MB - * All other encodings of the XSIZE field are reserved when SMOD=1 - */ - uint_reg_t smod : 1; - /** - * Total number of bytes to move for this transaction. When SMOD=1, - * this field is encoded - see SMOD description. - */ - uint_reg_t xsize : 14; - /** Reserved. */ - uint_reg_t __reserved_0 : 1; - /** - * Generation number. Used to indicate a valid descriptor in ring. When - * a new descriptor is written into the ring, software must toggle this - * bit. The net effect is that the GEN bit being written into new - * descriptors toggles each time the ring tail pointer wraps. - */ - uint_reg_t gen : 1; -#else /* __BIG_ENDIAN__ */ - uint_reg_t gen : 1; - uint_reg_t __reserved_0 : 1; - uint_reg_t xsize : 14; - uint_reg_t smod : 1; - uint_reg_t notif : 1; - uint_reg_t c : 1; - uint_reg_t bsz : 3; - int_reg_t va : 42; -#endif - - /* Word 1 */ - -#ifndef __BIG_ENDIAN__ - /** IO-side address */ - uint_reg_t io_address : 64; -#else /* __BIG_ENDIAN__ */ - uint_reg_t io_address : 64; -#endif - - }; - - /** Word access */ - uint_reg_t words[2]; -} TRIO_DMA_DESC_t; -#endif /* !defined(__ASSEMBLER__) */ - -#endif /* !defined(__ARCH_TRIO_SHM_H__) */ diff --git a/arch/tile/include/arch/trio_shm_def.h b/arch/tile/include/arch/trio_shm_def.h deleted file mode 100644 index 72a59c88b06a..000000000000 --- a/arch/tile/include/arch/trio_shm_def.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Machine-generated file; do not edit. */ - -#ifndef __ARCH_TRIO_SHM_DEF_H__ -#define __ARCH_TRIO_SHM_DEF_H__ -#endif /* !defined(__ARCH_TRIO_SHM_DEF_H__) */ diff --git a/arch/tile/include/arch/uart.h b/arch/tile/include/arch/uart.h deleted file mode 100644 index 07966970adad..000000000000 --- a/arch/tile/include/arch/uart.h +++ /dev/null @@ -1,300 +0,0 @@ -/* - * Copyright 2013 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Machine-generated file; do not edit. */ - -#ifndef __ARCH_UART_H__ -#define __ARCH_UART_H__ - -#include <arch/abi.h> -#include <arch/uart_def.h> - -#ifndef __ASSEMBLER__ - -/* Divisor. */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* - * Baud Rate Divisor. Desired_baud_rate = REF_CLK frequency / (baud * - * 16). - * Note: REF_CLK is always 125 MHz, the default - * divisor = 68, baud rate = 125M/(68*16) = 115200 baud. - */ - uint_reg_t divisor : 12; - /* Reserved. */ - uint_reg_t __reserved : 52; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved : 52; - uint_reg_t divisor : 12; -#endif - }; - - uint_reg_t word; -} UART_DIVISOR_t; - -/* FIFO Count. */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* - * n: n active entries in the receive FIFO (max is 2**8). Each entry has - * 8 bits. - * 0: no active entry in the receive FIFO (that is empty). - */ - uint_reg_t rfifo_count : 9; - /* Reserved. */ - uint_reg_t __reserved_0 : 7; - /* - * n: n active entries in the transmit FIFO (max is 2**8). Each entry has - * 8 bits. - * 0: no active entry in the transmit FIFO (that is empty). - */ - uint_reg_t tfifo_count : 9; - /* Reserved. */ - uint_reg_t __reserved_1 : 7; - /* - * n: n active entries in the write FIFO (max is 2**2). Each entry has 8 - * bits. - * 0: no active entry in the write FIFO (that is empty). - */ - uint_reg_t wfifo_count : 3; - /* Reserved. */ - uint_reg_t __reserved_2 : 29; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved_2 : 29; - uint_reg_t wfifo_count : 3; - uint_reg_t __reserved_1 : 7; - uint_reg_t tfifo_count : 9; - uint_reg_t __reserved_0 : 7; - uint_reg_t rfifo_count : 9; -#endif - }; - - uint_reg_t word; -} UART_FIFO_COUNT_t; - -/* FLAG. */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* Reserved. */ - uint_reg_t __reserved_0 : 1; - /* 1: receive FIFO is empty */ - uint_reg_t rfifo_empty : 1; - /* 1: write FIFO is empty. */ - uint_reg_t wfifo_empty : 1; - /* 1: transmit FIFO is empty. */ - uint_reg_t tfifo_empty : 1; - /* 1: receive FIFO is full. */ - uint_reg_t rfifo_full : 1; - /* 1: write FIFO is full. */ - uint_reg_t wfifo_full : 1; - /* 1: transmit FIFO is full. */ - uint_reg_t tfifo_full : 1; - /* Reserved. */ - uint_reg_t __reserved_1 : 57; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved_1 : 57; - uint_reg_t tfifo_full : 1; - uint_reg_t wfifo_full : 1; - uint_reg_t rfifo_full : 1; - uint_reg_t tfifo_empty : 1; - uint_reg_t wfifo_empty : 1; - uint_reg_t rfifo_empty : 1; - uint_reg_t __reserved_0 : 1; -#endif - }; - - uint_reg_t word; -} UART_FLAG_t; - -/* - * Interrupt Vector Mask. - * Each bit in this register corresponds to a specific interrupt. When set, - * the associated interrupt will not be dispatched. - */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* Read data FIFO read and no data available */ - uint_reg_t rdat_err : 1; - /* Write FIFO was written but it was full */ - uint_reg_t wdat_err : 1; - /* Stop bit not found when current data was received */ - uint_reg_t frame_err : 1; - /* Parity error was detected when current data was received */ - uint_reg_t parity_err : 1; - /* Data was received but the receive FIFO was full */ - uint_reg_t rfifo_overflow : 1; - /* - * An almost full event is reached when data is to be written to the - * receive FIFO, and the receive FIFO has more than or equal to - * BUFFER_THRESHOLD.RFIFO_AFULL bytes. - */ - uint_reg_t rfifo_afull : 1; - /* Reserved. */ - uint_reg_t __reserved_0 : 1; - /* An entry in the transmit FIFO was popped */ - uint_reg_t tfifo_re : 1; - /* An entry has been pushed into the receive FIFO */ - uint_reg_t rfifo_we : 1; - /* An entry of the write FIFO has been popped */ - uint_reg_t wfifo_re : 1; - /* Rshim read receive FIFO in protocol mode */ - uint_reg_t rfifo_err : 1; - /* - * An almost empty event is reached when data is to be read from the - * transmit FIFO, and the transmit FIFO has less than or equal to - * BUFFER_THRESHOLD.TFIFO_AEMPTY bytes. - */ - uint_reg_t tfifo_aempty : 1; - /* Reserved. */ - uint_reg_t __reserved_1 : 52; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved_1 : 52; - uint_reg_t tfifo_aempty : 1; - uint_reg_t rfifo_err : 1; - uint_reg_t wfifo_re : 1; - uint_reg_t rfifo_we : 1; - uint_reg_t tfifo_re : 1; - uint_reg_t __reserved_0 : 1; - uint_reg_t rfifo_afull : 1; - uint_reg_t rfifo_overflow : 1; - uint_reg_t parity_err : 1; - uint_reg_t frame_err : 1; - uint_reg_t wdat_err : 1; - uint_reg_t rdat_err : 1; -#endif - }; - - uint_reg_t word; -} UART_INTERRUPT_MASK_t; - -/* - * Interrupt vector, write-one-to-clear. - * Each bit in this register corresponds to a specific interrupt. Hardware - * sets the bit when the associated condition has occurred. Writing a 1 - * clears the status bit. - */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* Read data FIFO read and no data available */ - uint_reg_t rdat_err : 1; - /* Write FIFO was written but it was full */ - uint_reg_t wdat_err : 1; - /* Stop bit not found when current data was received */ - uint_reg_t frame_err : 1; - /* Parity error was detected when current data was received */ - uint_reg_t parity_err : 1; - /* Data was received but the receive FIFO was full */ - uint_reg_t rfifo_overflow : 1; - /* - * Data was received and the receive FIFO is now almost full (more than - * BUFFER_THRESHOLD.RFIFO_AFULL bytes in it) - */ - uint_reg_t rfifo_afull : 1; - /* Reserved. */ - uint_reg_t __reserved_0 : 1; - /* An entry in the transmit FIFO was popped */ - uint_reg_t tfifo_re : 1; - /* An entry has been pushed into the receive FIFO */ - uint_reg_t rfifo_we : 1; - /* An entry of the write FIFO has been popped */ - uint_reg_t wfifo_re : 1; - /* Rshim read receive FIFO in protocol mode */ - uint_reg_t rfifo_err : 1; - /* - * Data was read from the transmit FIFO and now it is almost empty (less - * than or equal to BUFFER_THRESHOLD.TFIFO_AEMPTY bytes in it). - */ - uint_reg_t tfifo_aempty : 1; - /* Reserved. */ - uint_reg_t __reserved_1 : 52; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved_1 : 52; - uint_reg_t tfifo_aempty : 1; - uint_reg_t rfifo_err : 1; - uint_reg_t wfifo_re : 1; - uint_reg_t rfifo_we : 1; - uint_reg_t tfifo_re : 1; - uint_reg_t __reserved_0 : 1; - uint_reg_t rfifo_afull : 1; - uint_reg_t rfifo_overflow : 1; - uint_reg_t parity_err : 1; - uint_reg_t frame_err : 1; - uint_reg_t wdat_err : 1; - uint_reg_t rdat_err : 1; -#endif - }; - - uint_reg_t word; -} UART_INTERRUPT_STATUS_t; - -/* Type. */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* Number of stop bits, rx and tx */ - uint_reg_t sbits : 1; - /* Reserved. */ - uint_reg_t __reserved_0 : 1; - /* Data word size, rx and tx */ - uint_reg_t dbits : 1; - /* Reserved. */ - uint_reg_t __reserved_1 : 1; - /* Parity selection, rx and tx */ - uint_reg_t ptype : 3; - /* Reserved. */ - uint_reg_t __reserved_2 : 57; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved_2 : 57; - uint_reg_t ptype : 3; - uint_reg_t __reserved_1 : 1; - uint_reg_t dbits : 1; - uint_reg_t __reserved_0 : 1; - uint_reg_t sbits : 1; -#endif - }; - - uint_reg_t word; -} UART_TYPE_t; -#endif /* !defined(__ASSEMBLER__) */ - -#endif /* !defined(__ARCH_UART_H__) */ diff --git a/arch/tile/include/arch/uart_def.h b/arch/tile/include/arch/uart_def.h deleted file mode 100644 index 42bcaf535379..000000000000 --- a/arch/tile/include/arch/uart_def.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Copyright 2013 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Machine-generated file; do not edit. */ - -#ifndef __ARCH_UART_DEF_H__ -#define __ARCH_UART_DEF_H__ -#define UART_DIVISOR 0x0158 -#define UART_FIFO_COUNT 0x0110 -#define UART_FLAG 0x0108 -#define UART_INTERRUPT_MASK 0x0208 -#define UART_INTERRUPT_MASK__RDAT_ERR_SHIFT 0 -#define UART_INTERRUPT_MASK__RDAT_ERR_WIDTH 1 -#define UART_INTERRUPT_MASK__RDAT_ERR_RESET_VAL 1 -#define UART_INTERRUPT_MASK__RDAT_ERR_RMASK 0x1 -#define UART_INTERRUPT_MASK__RDAT_ERR_MASK 0x1 -#define UART_INTERRUPT_MASK__RDAT_ERR_FIELD 0,0 -#define UART_INTERRUPT_MASK__WDAT_ERR_SHIFT 1 -#define UART_INTERRUPT_MASK__WDAT_ERR_WIDTH 1 -#define UART_INTERRUPT_MASK__WDAT_ERR_RESET_VAL 1 -#define UART_INTERRUPT_MASK__WDAT_ERR_RMASK 0x1 -#define UART_INTERRUPT_MASK__WDAT_ERR_MASK 0x2 -#define UART_INTERRUPT_MASK__WDAT_ERR_FIELD 1,1 -#define UART_INTERRUPT_MASK__FRAME_ERR_SHIFT 2 -#define UART_INTERRUPT_MASK__FRAME_ERR_WIDTH 1 -#define UART_INTERRUPT_MASK__FRAME_ERR_RESET_VAL 1 -#define UART_INTERRUPT_MASK__FRAME_ERR_RMASK 0x1 -#define UART_INTERRUPT_MASK__FRAME_ERR_MASK 0x4 -#define UART_INTERRUPT_MASK__FRAME_ERR_FIELD 2,2 -#define UART_INTERRUPT_MASK__PARITY_ERR_SHIFT 3 -#define UART_INTERRUPT_MASK__PARITY_ERR_WIDTH 1 -#define UART_INTERRUPT_MASK__PARITY_ERR_RESET_VAL 1 -#define UART_INTERRUPT_MASK__PARITY_ERR_RMASK 0x1 -#define UART_INTERRUPT_MASK__PARITY_ERR_MASK 0x8 -#define UART_INTERRUPT_MASK__PARITY_ERR_FIELD 3,3 -#define UART_INTERRUPT_MASK__RFIFO_OVERFLOW_SHIFT 4 -#define UART_INTERRUPT_MASK__RFIFO_OVERFLOW_WIDTH 1 -#define UART_INTERRUPT_MASK__RFIFO_OVERFLOW_RESET_VAL 1 -#define UART_INTERRUPT_MASK__RFIFO_OVERFLOW_RMASK 0x1 -#define UART_INTERRUPT_MASK__RFIFO_OVERFLOW_MASK 0x10 -#define UART_INTERRUPT_MASK__RFIFO_OVERFLOW_FIELD 4,4 -#define UART_INTERRUPT_MASK__RFIFO_AFULL_SHIFT 5 -#define UART_INTERRUPT_MASK__RFIFO_AFULL_WIDTH 1 -#define UART_INTERRUPT_MASK__RFIFO_AFULL_RESET_VAL 1 -#define UART_INTERRUPT_MASK__RFIFO_AFULL_RMASK 0x1 -#define UART_INTERRUPT_MASK__RFIFO_AFULL_MASK 0x20 -#define UART_INTERRUPT_MASK__RFIFO_AFULL_FIELD 5,5 -#define UART_INTERRUPT_MASK__TFIFO_RE_SHIFT 7 -#define UART_INTERRUPT_MASK__TFIFO_RE_WIDTH 1 -#define UART_INTERRUPT_MASK__TFIFO_RE_RESET_VAL 1 -#define UART_INTERRUPT_MASK__TFIFO_RE_RMASK 0x1 -#define UART_INTERRUPT_MASK__TFIFO_RE_MASK 0x80 -#define UART_INTERRUPT_MASK__TFIFO_RE_FIELD 7,7 -#define UART_INTERRUPT_MASK__RFIFO_WE_SHIFT 8 -#define UART_INTERRUPT_MASK__RFIFO_WE_WIDTH 1 -#define UART_INTERRUPT_MASK__RFIFO_WE_RESET_VAL 1 -#define UART_INTERRUPT_MASK__RFIFO_WE_RMASK 0x1 -#define UART_INTERRUPT_MASK__RFIFO_WE_MASK 0x100 -#define UART_INTERRUPT_MASK__RFIFO_WE_FIELD 8,8 -#define UART_INTERRUPT_MASK__WFIFO_RE_SHIFT 9 -#define UART_INTERRUPT_MASK__WFIFO_RE_WIDTH 1 -#define UART_INTERRUPT_MASK__WFIFO_RE_RESET_VAL 1 -#define UART_INTERRUPT_MASK__WFIFO_RE_RMASK 0x1 -#define UART_INTERRUPT_MASK__WFIFO_RE_MASK 0x200 -#define UART_INTERRUPT_MASK__WFIFO_RE_FIELD 9,9 -#define UART_INTERRUPT_MASK__RFIFO_ERR_SHIFT 10 -#define UART_INTERRUPT_MASK__RFIFO_ERR_WIDTH 1 -#define UART_INTERRUPT_MASK__RFIFO_ERR_RESET_VAL 1 -#define UART_INTERRUPT_MASK__RFIFO_ERR_RMASK 0x1 -#define UART_INTERRUPT_MASK__RFIFO_ERR_MASK 0x400 -#define UART_INTERRUPT_MASK__RFIFO_ERR_FIELD 10,10 -#define UART_INTERRUPT_MASK__TFIFO_AEMPTY_SHIFT 11 -#define UART_INTERRUPT_MASK__TFIFO_AEMPTY_WIDTH 1 -#define UART_INTERRUPT_MASK__TFIFO_AEMPTY_RESET_VAL 1 -#define UART_INTERRUPT_MASK__TFIFO_AEMPTY_RMASK 0x1 -#define UART_INTERRUPT_MASK__TFIFO_AEMPTY_MASK 0x800 -#define UART_INTERRUPT_MASK__TFIFO_AEMPTY_FIELD 11,11 -#define UART_INTERRUPT_STATUS 0x0200 -#define UART_RECEIVE_DATA 0x0148 -#define UART_TRANSMIT_DATA 0x0140 -#define UART_TYPE 0x0160 -#define UART_TYPE__SBITS_SHIFT 0 -#define UART_TYPE__SBITS_WIDTH 1 -#define UART_TYPE__SBITS_RESET_VAL 1 -#define UART_TYPE__SBITS_RMASK 0x1 -#define UART_TYPE__SBITS_MASK 0x1 -#define UART_TYPE__SBITS_FIELD 0,0 -#define UART_TYPE__SBITS_VAL_ONE_SBITS 0x0 -#define UART_TYPE__SBITS_VAL_TWO_SBITS 0x1 -#define UART_TYPE__DBITS_SHIFT 2 -#define UART_TYPE__DBITS_WIDTH 1 -#define UART_TYPE__DBITS_RESET_VAL 0 -#define UART_TYPE__DBITS_RMASK 0x1 -#define UART_TYPE__DBITS_MASK 0x4 -#define UART_TYPE__DBITS_FIELD 2,2 -#define UART_TYPE__DBITS_VAL_EIGHT_DBITS 0x0 -#define UART_TYPE__DBITS_VAL_SEVEN_DBITS 0x1 -#define UART_TYPE__PTYPE_SHIFT 4 -#define UART_TYPE__PTYPE_WIDTH 3 -#define UART_TYPE__PTYPE_RESET_VAL 3 -#define UART_TYPE__PTYPE_RMASK 0x7 -#define UART_TYPE__PTYPE_MASK 0x70 -#define UART_TYPE__PTYPE_FIELD 4,6 -#define UART_TYPE__PTYPE_VAL_NONE 0x0 -#define UART_TYPE__PTYPE_VAL_MARK 0x1 -#define UART_TYPE__PTYPE_VAL_SPACE 0x2 -#define UART_TYPE__PTYPE_VAL_EVEN 0x3 -#define UART_TYPE__PTYPE_VAL_ODD 0x4 -#endif /* !defined(__ARCH_UART_DEF_H__) */ diff --git a/arch/tile/include/arch/usb_host.h b/arch/tile/include/arch/usb_host.h deleted file mode 100644 index d09f32683962..000000000000 --- a/arch/tile/include/arch/usb_host.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Machine-generated file; do not edit. */ - -#ifndef __ARCH_USB_HOST_H__ -#define __ARCH_USB_HOST_H__ - -#include <arch/abi.h> -#include <arch/usb_host_def.h> - -#ifndef __ASSEMBLER__ -#endif /* !defined(__ASSEMBLER__) */ - -#endif /* !defined(__ARCH_USB_HOST_H__) */ diff --git a/arch/tile/include/arch/usb_host_def.h b/arch/tile/include/arch/usb_host_def.h deleted file mode 100644 index aeed7753e8e1..000000000000 --- a/arch/tile/include/arch/usb_host_def.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Machine-generated file; do not edit. */ - -#ifndef __ARCH_USB_HOST_DEF_H__ -#define __ARCH_USB_HOST_DEF_H__ -#endif /* !defined(__ARCH_USB_HOST_DEF_H__) */ diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild deleted file mode 100644 index 414dfc3a1808..000000000000 --- a/arch/tile/include/asm/Kbuild +++ /dev/null @@ -1,18 +0,0 @@ -generic-y += bug.h -generic-y += bugs.h -generic-y += emergency-restart.h -generic-y += exec.h -generic-y += extable.h -generic-y += fb.h -generic-y += hw_irq.h -generic-y += irq_regs.h -generic-y += local.h -generic-y += local64.h -generic-y += mcs_spinlock.h -generic-y += mm-arch-hooks.h -generic-y += parport.h -generic-y += preempt.h -generic-y += seccomp.h -generic-y += serial.h -generic-y += trace_clock.h -generic-y += xor.h diff --git a/arch/tile/include/asm/asm-offsets.h b/arch/tile/include/asm/asm-offsets.h deleted file mode 100644 index d370ee36a182..000000000000 --- a/arch/tile/include/asm/asm-offsets.h +++ /dev/null @@ -1 +0,0 @@ -#include <generated/asm-offsets.h> diff --git a/arch/tile/include/asm/atomic.h b/arch/tile/include/asm/atomic.h deleted file mode 100644 index 8dda3c8ff5ab..000000000000 --- a/arch/tile/include/asm/atomic.h +++ /dev/null @@ -1,210 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Atomic primitives. - */ - -#ifndef _ASM_TILE_ATOMIC_H -#define _ASM_TILE_ATOMIC_H - -#include <asm/cmpxchg.h> - -#ifndef __ASSEMBLY__ - -#include <linux/compiler.h> -#include <linux/types.h> - -#define ATOMIC_INIT(i) { (i) } - -/** - * atomic_read - read atomic variable - * @v: pointer of type atomic_t - * - * Atomically reads the value of @v. - */ -static inline int atomic_read(const atomic_t *v) -{ - return READ_ONCE(v->counter); -} - -/** - * atomic_sub_return - subtract integer and return - * @v: pointer of type atomic_t - * @i: integer value to subtract - * - * Atomically subtracts @i from @v and returns @v - @i - */ -#define atomic_sub_return(i, v) atomic_add_return((int)(-(i)), (v)) - -#define atomic_fetch_sub(i, v) atomic_fetch_add(-(int)(i), (v)) - -/** - * atomic_sub - subtract integer from atomic variable - * @i: integer value to subtract - * @v: pointer of type atomic_t - * - * Atomically subtracts @i from @v. - */ -#define atomic_sub(i, v) atomic_add((int)(-(i)), (v)) - -/** - * atomic_sub_and_test - subtract value from variable and test result - * @i: integer value to subtract - * @v: pointer of type atomic_t - * - * Atomically subtracts @i from @v and returns true if the result is - * zero, or false for all other cases. - */ -#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0) - -/** - * atomic_inc_return - increment memory and return - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1 and returns the new value. - */ -#define atomic_inc_return(v) atomic_add_return(1, (v)) - -/** - * atomic_dec_return - decrement memory and return - * @v: pointer of type atomic_t - * - * Atomically decrements @v by 1 and returns the new value. - */ -#define atomic_dec_return(v) atomic_sub_return(1, (v)) - -/** - * atomic_inc - increment atomic variable - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1. - */ -#define atomic_inc(v) atomic_add(1, (v)) - -/** - * atomic_dec - decrement atomic variable - * @v: pointer of type atomic_t - * - * Atomically decrements @v by 1. - */ -#define atomic_dec(v) atomic_sub(1, (v)) - -/** - * atomic_dec_and_test - decrement and test - * @v: pointer of type atomic_t - * - * Atomically decrements @v by 1 and returns true if the result is 0. - */ -#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0) - -/** - * atomic_inc_and_test - increment and test - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1 and returns true if the result is 0. - */ -#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) - -/** - * atomic_xchg - atomically exchange contents of memory with a new value - * @v: pointer of type atomic_t - * @i: integer value to store in memory - * - * Atomically sets @v to @i and returns old @v - */ -static inline int atomic_xchg(atomic_t *v, int n) -{ - return xchg(&v->counter, n); -} - -/** - * atomic_cmpxchg - atomically exchange contents of memory if it matches - * @v: pointer of type atomic_t - * @o: old value that memory should have - * @n: new value to write to memory if it matches - * - * Atomically checks if @v holds @o and replaces it with @n if so. - * Returns the old value at @v. - */ -static inline int atomic_cmpxchg(atomic_t *v, int o, int n) -{ - return cmpxchg(&v->counter, o, n); -} - -/** - * atomic_add_negative - add and test if negative - * @v: pointer of type atomic_t - * @i: integer value to add - * - * Atomically adds @i to @v and returns true if the result is - * negative, or false when result is greater than or equal to zero. - */ -#define atomic_add_negative(i, v) (atomic_add_return((i), (v)) < 0) - -#endif /* __ASSEMBLY__ */ - -#ifndef __tilegx__ -#include <asm/atomic_32.h> -#else -#include <asm/atomic_64.h> -#endif - -#ifndef __ASSEMBLY__ - -/** - * atomic64_xchg - atomically exchange contents of memory with a new value - * @v: pointer of type atomic64_t - * @i: integer value to store in memory - * - * Atomically sets @v to @i and returns old @v - */ -static inline long long atomic64_xchg(atomic64_t *v, long long n) -{ - return xchg64(&v->counter, n); -} - -/** - * atomic64_cmpxchg - atomically exchange contents of memory if it matches - * @v: pointer of type atomic64_t - * @o: old value that memory should have - * @n: new value to write to memory if it matches - * - * Atomically checks if @v holds @o and replaces it with @n if so. - * Returns the old value at @v. - */ -static inline long long atomic64_cmpxchg(atomic64_t *v, long long o, - long long n) -{ - return cmpxchg64(&v->counter, o, n); -} - -static inline long long atomic64_dec_if_positive(atomic64_t *v) -{ - long long c, old, dec; - - c = atomic64_read(v); - for (;;) { - dec = c - 1; - if (unlikely(dec < 0)) - break; - old = atomic64_cmpxchg((v), c, dec); - if (likely(old == c)) - break; - c = old; - } - return dec; -} - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_TILE_ATOMIC_H */ diff --git a/arch/tile/include/asm/atomic_32.h b/arch/tile/include/asm/atomic_32.h deleted file mode 100644 index 53a423e7cb92..000000000000 --- a/arch/tile/include/asm/atomic_32.h +++ /dev/null @@ -1,297 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Do not include directly; use <linux/atomic.h>. - */ - -#ifndef _ASM_TILE_ATOMIC_32_H -#define _ASM_TILE_ATOMIC_32_H - -#include <asm/barrier.h> -#include <arch/chip.h> - -#ifndef __ASSEMBLY__ - -/** - * atomic_add - add integer to atomic variable - * @i: integer value to add - * @v: pointer of type atomic_t - * - * Atomically adds @i to @v. - */ -static inline void atomic_add(int i, atomic_t *v) -{ - _atomic_xchg_add(&v->counter, i); -} - -#define ATOMIC_OPS(op) \ -unsigned long _atomic_fetch_##op(volatile unsigned long *p, unsigned long mask); \ -static inline void atomic_##op(int i, atomic_t *v) \ -{ \ - _atomic_fetch_##op((unsigned long *)&v->counter, i); \ -} \ -static inline int atomic_fetch_##op(int i, atomic_t *v) \ -{ \ - smp_mb(); \ - return _atomic_fetch_##op((unsigned long *)&v->counter, i); \ -} - -ATOMIC_OPS(and) -ATOMIC_OPS(or) -ATOMIC_OPS(xor) - -#undef ATOMIC_OPS - -static inline int atomic_fetch_add(int i, atomic_t *v) -{ - smp_mb(); - return _atomic_xchg_add(&v->counter, i); -} - -/** - * atomic_add_return - add integer and return - * @v: pointer of type atomic_t - * @i: integer value to add - * - * Atomically adds @i to @v and returns @i + @v - */ -static inline int atomic_add_return(int i, atomic_t *v) -{ - smp_mb(); /* barrier for proper semantics */ - return _atomic_xchg_add(&v->counter, i) + i; -} - -/** - * __atomic_add_unless - add unless the number is already a given value - * @v: pointer of type atomic_t - * @a: the amount to add to v... - * @u: ...unless v is equal to u. - * - * Atomically adds @a to @v, so long as @v was not already @u. - * Returns the old value of @v. - */ -static inline int __atomic_add_unless(atomic_t *v, int a, int u) -{ - smp_mb(); /* barrier for proper semantics */ - return _atomic_xchg_add_unless(&v->counter, a, u); -} - -/** - * atomic_set - set atomic variable - * @v: pointer of type atomic_t - * @i: required value - * - * Atomically sets the value of @v to @i. - * - * atomic_set() can't be just a raw store, since it would be lost if it - * fell between the load and store of one of the other atomic ops. - */ -static inline void atomic_set(atomic_t *v, int n) -{ - _atomic_xchg(&v->counter, n); -} - -#define atomic_set_release(v, i) atomic_set((v), (i)) - -/* A 64bit atomic type */ - -typedef struct { - long long counter; -} atomic64_t; - -#define ATOMIC64_INIT(val) { (val) } - -/** - * atomic64_read - read atomic variable - * @v: pointer of type atomic64_t - * - * Atomically reads the value of @v. - */ -static inline long long atomic64_read(const atomic64_t *v) -{ - /* - * Requires an atomic op to read both 32-bit parts consistently. - * Casting away const is safe since the atomic support routines - * do not write to memory if the value has not been modified. - */ - return _atomic64_xchg_add((long long *)&v->counter, 0); -} - -/** - * atomic64_add - add integer to atomic variable - * @i: integer value to add - * @v: pointer of type atomic64_t - * - * Atomically adds @i to @v. - */ -static inline void atomic64_add(long long i, atomic64_t *v) -{ - _atomic64_xchg_add(&v->counter, i); -} - -#define ATOMIC64_OPS(op) \ -long long _atomic64_fetch_##op(long long *v, long long n); \ -static inline void atomic64_##op(long long i, atomic64_t *v) \ -{ \ - _atomic64_fetch_##op(&v->counter, i); \ -} \ -static inline long long atomic64_fetch_##op(long long i, atomic64_t *v) \ -{ \ - smp_mb(); \ - return _atomic64_fetch_##op(&v->counter, i); \ -} - -ATOMIC64_OPS(and) -ATOMIC64_OPS(or) -ATOMIC64_OPS(xor) - -#undef ATOMIC64_OPS - -static inline long long atomic64_fetch_add(long long i, atomic64_t *v) -{ - smp_mb(); - return _atomic64_xchg_add(&v->counter, i); -} - -/** - * atomic64_add_return - add integer and return - * @v: pointer of type atomic64_t - * @i: integer value to add - * - * Atomically adds @i to @v and returns @i + @v - */ -static inline long long atomic64_add_return(long long i, atomic64_t *v) -{ - smp_mb(); /* barrier for proper semantics */ - return _atomic64_xchg_add(&v->counter, i) + i; -} - -/** - * atomic64_add_unless - add unless the number is already a given value - * @v: pointer of type atomic64_t - * @a: the amount to add to v... - * @u: ...unless v is equal to u. - * - * Atomically adds @a to @v, so long as @v was not already @u. - * Returns non-zero if @v was not @u, and zero otherwise. - */ -static inline long long atomic64_add_unless(atomic64_t *v, long long a, - long long u) -{ - smp_mb(); /* barrier for proper semantics */ - return _atomic64_xchg_add_unless(&v->counter, a, u) != u; -} - -/** - * atomic64_set - set atomic variable - * @v: pointer of type atomic64_t - * @i: required value - * - * Atomically sets the value of @v to @i. - * - * atomic64_set() can't be just a raw store, since it would be lost if it - * fell between the load and store of one of the other atomic ops. - */ -static inline void atomic64_set(atomic64_t *v, long long n) -{ - _atomic64_xchg(&v->counter, n); -} - -#define atomic64_add_negative(a, v) (atomic64_add_return((a), (v)) < 0) -#define atomic64_inc(v) atomic64_add(1LL, (v)) -#define atomic64_inc_return(v) atomic64_add_return(1LL, (v)) -#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0) -#define atomic64_sub_return(i, v) atomic64_add_return(-(i), (v)) -#define atomic64_fetch_sub(i, v) atomic64_fetch_add(-(i), (v)) -#define atomic64_sub_and_test(a, v) (atomic64_sub_return((a), (v)) == 0) -#define atomic64_sub(i, v) atomic64_add(-(i), (v)) -#define atomic64_dec(v) atomic64_sub(1LL, (v)) -#define atomic64_dec_return(v) atomic64_sub_return(1LL, (v)) -#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0) -#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1LL, 0LL) - -#endif /* !__ASSEMBLY__ */ - -/* - * Internal definitions only beyond this point. - */ - -/* - * Number of atomic locks in atomic_locks[]. Must be a power of two. - * There is no reason for more than PAGE_SIZE / 8 entries, since that - * is the maximum number of pointer bits we can use to index this. - * And we cannot have more than PAGE_SIZE / 4, since this has to - * fit on a single page and each entry takes 4 bytes. - */ -#define ATOMIC_HASH_SHIFT (PAGE_SHIFT - 3) -#define ATOMIC_HASH_SIZE (1 << ATOMIC_HASH_SHIFT) - -#ifndef __ASSEMBLY__ -extern int atomic_locks[]; -#endif - -/* - * All the code that may fault while holding an atomic lock must - * place the pointer to the lock in ATOMIC_LOCK_REG so the fault code - * can correctly release and reacquire the lock. Note that we - * mention the register number in a comment in "lib/atomic_asm.S" to help - * assembly coders from using this register by mistake, so if it - * is changed here, change that comment as well. - */ -#define ATOMIC_LOCK_REG 20 -#define ATOMIC_LOCK_REG_NAME r20 - -#ifndef __ASSEMBLY__ -/* Called from setup to initialize a hash table to point to per_cpu locks. */ -void __init_atomic_per_cpu(void); - -#ifdef CONFIG_SMP -/* Support releasing the atomic lock in do_page_fault_ics(). */ -void __atomic_fault_unlock(int *lock_ptr); -#endif - -/* Return a pointer to the lock for the given address. */ -int *__atomic_hashed_lock(volatile void *v); - -/* Private helper routines in lib/atomic_asm_32.S */ -struct __get_user { - unsigned long val; - int err; -}; -extern struct __get_user __atomic32_cmpxchg(volatile int *p, - int *lock, int o, int n); -extern struct __get_user __atomic32_xchg(volatile int *p, int *lock, int n); -extern struct __get_user __atomic32_xchg_add(volatile int *p, int *lock, int n); -extern struct __get_user __atomic32_xchg_add_unless(volatile int *p, - int *lock, int o, int n); -extern struct __get_user __atomic32_fetch_or(volatile int *p, int *lock, int n); -extern struct __get_user __atomic32_fetch_and(volatile int *p, int *lock, int n); -extern struct __get_user __atomic32_fetch_andn(volatile int *p, int *lock, int n); -extern struct __get_user __atomic32_fetch_xor(volatile int *p, int *lock, int n); -extern long long __atomic64_cmpxchg(volatile long long *p, int *lock, - long long o, long long n); -extern long long __atomic64_xchg(volatile long long *p, int *lock, long long n); -extern long long __atomic64_xchg_add(volatile long long *p, int *lock, - long long n); -extern long long __atomic64_xchg_add_unless(volatile long long *p, - int *lock, long long o, long long n); -extern long long __atomic64_fetch_and(volatile long long *p, int *lock, long long n); -extern long long __atomic64_fetch_or(volatile long long *p, int *lock, long long n); -extern long long __atomic64_fetch_xor(volatile long long *p, int *lock, long long n); - -/* Return failure from the atomic wrappers. */ -struct __get_user __atomic_bad_address(int __user *addr); - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_TILE_ATOMIC_32_H */ diff --git a/arch/tile/include/asm/atomic_64.h b/arch/tile/include/asm/atomic_64.h deleted file mode 100644 index 4cefa0c9fd81..000000000000 --- a/arch/tile/include/asm/atomic_64.h +++ /dev/null @@ -1,200 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Do not include directly; use <linux/atomic.h>. - */ - -#ifndef _ASM_TILE_ATOMIC_64_H -#define _ASM_TILE_ATOMIC_64_H - -#ifndef __ASSEMBLY__ - -#include <asm/barrier.h> -#include <arch/spr_def.h> - -/* First, the 32-bit atomic ops that are "real" on our 64-bit platform. */ - -#define atomic_set(v, i) WRITE_ONCE((v)->counter, (i)) - -/* - * The smp_mb() operations throughout are to support the fact that - * Linux requires memory barriers before and after the operation, - * on any routine which updates memory and returns a value. - */ - -/* - * Note a subtlety of the locking here. We are required to provide a - * full memory barrier before and after the operation. However, we - * only provide an explicit mb before the operation. After the - * operation, we use barrier() to get a full mb for free, because: - * - * (1) The barrier directive to the compiler prohibits any instructions - * being statically hoisted before the barrier; - * (2) the microarchitecture will not issue any further instructions - * until the fetchadd result is available for the "+ i" add instruction; - * (3) the smb_mb before the fetchadd ensures that no other memory - * operations are in flight at this point. - */ -static inline int atomic_add_return(int i, atomic_t *v) -{ - int val; - smp_mb(); /* barrier for proper semantics */ - val = __insn_fetchadd4((void *)&v->counter, i) + i; - barrier(); /* equivalent to smp_mb(); see block comment above */ - return val; -} - -#define ATOMIC_OPS(op) \ -static inline int atomic_fetch_##op(int i, atomic_t *v) \ -{ \ - int val; \ - smp_mb(); \ - val = __insn_fetch##op##4((void *)&v->counter, i); \ - smp_mb(); \ - return val; \ -} \ -static inline void atomic_##op(int i, atomic_t *v) \ -{ \ - __insn_fetch##op##4((void *)&v->counter, i); \ -} - -ATOMIC_OPS(add) -ATOMIC_OPS(and) -ATOMIC_OPS(or) - -#undef ATOMIC_OPS - -static inline int atomic_fetch_xor(int i, atomic_t *v) -{ - int guess, oldval = v->counter; - smp_mb(); - do { - guess = oldval; - __insn_mtspr(SPR_CMPEXCH_VALUE, guess); - oldval = __insn_cmpexch4(&v->counter, guess ^ i); - } while (guess != oldval); - smp_mb(); - return oldval; -} - -static inline void atomic_xor(int i, atomic_t *v) -{ - int guess, oldval = v->counter; - do { - guess = oldval; - __insn_mtspr(SPR_CMPEXCH_VALUE, guess); - oldval = __insn_cmpexch4(&v->counter, guess ^ i); - } while (guess != oldval); -} - -static inline int __atomic_add_unless(atomic_t *v, int a, int u) -{ - int guess, oldval = v->counter; - do { - if (oldval == u) - break; - guess = oldval; - oldval = cmpxchg(&v->counter, guess, guess + a); - } while (guess != oldval); - return oldval; -} - -/* Now the true 64-bit operations. */ - -#define ATOMIC64_INIT(i) { (i) } - -#define atomic64_read(v) READ_ONCE((v)->counter) -#define atomic64_set(v, i) WRITE_ONCE((v)->counter, (i)) - -static inline long atomic64_add_return(long i, atomic64_t *v) -{ - int val; - smp_mb(); /* barrier for proper semantics */ - val = __insn_fetchadd((void *)&v->counter, i) + i; - barrier(); /* equivalent to smp_mb; see atomic_add_return() */ - return val; -} - -#define ATOMIC64_OPS(op) \ -static inline long atomic64_fetch_##op(long i, atomic64_t *v) \ -{ \ - long val; \ - smp_mb(); \ - val = __insn_fetch##op((void *)&v->counter, i); \ - smp_mb(); \ - return val; \ -} \ -static inline void atomic64_##op(long i, atomic64_t *v) \ -{ \ - __insn_fetch##op((void *)&v->counter, i); \ -} - -ATOMIC64_OPS(add) -ATOMIC64_OPS(and) -ATOMIC64_OPS(or) - -#undef ATOMIC64_OPS - -static inline long atomic64_fetch_xor(long i, atomic64_t *v) -{ - long guess, oldval = v->counter; - smp_mb(); - do { - guess = oldval; - __insn_mtspr(SPR_CMPEXCH_VALUE, guess); - oldval = __insn_cmpexch(&v->counter, guess ^ i); - } while (guess != oldval); - smp_mb(); - return oldval; -} - -static inline void atomic64_xor(long i, atomic64_t *v) -{ - long guess, oldval = v->counter; - do { - guess = oldval; - __insn_mtspr(SPR_CMPEXCH_VALUE, guess); - oldval = __insn_cmpexch(&v->counter, guess ^ i); - } while (guess != oldval); -} - -static inline long atomic64_add_unless(atomic64_t *v, long a, long u) -{ - long guess, oldval = v->counter; - do { - if (oldval == u) - break; - guess = oldval; - oldval = cmpxchg(&v->counter, guess, guess + a); - } while (guess != oldval); - return oldval != u; -} - -#define atomic64_sub_return(i, v) atomic64_add_return(-(i), (v)) -#define atomic64_fetch_sub(i, v) atomic64_fetch_add(-(i), (v)) -#define atomic64_sub(i, v) atomic64_add(-(i), (v)) -#define atomic64_inc_return(v) atomic64_add_return(1, (v)) -#define atomic64_dec_return(v) atomic64_sub_return(1, (v)) -#define atomic64_inc(v) atomic64_add(1, (v)) -#define atomic64_dec(v) atomic64_sub(1, (v)) - -#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0) -#define atomic64_dec_and_test(v) (atomic64_dec_return(v) == 0) -#define atomic64_sub_and_test(i, v) (atomic64_sub_return((i), (v)) == 0) -#define atomic64_add_negative(i, v) (atomic64_add_return((i), (v)) < 0) - -#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_TILE_ATOMIC_64_H */ diff --git a/arch/tile/include/asm/backtrace.h b/arch/tile/include/asm/backtrace.h deleted file mode 100644 index bd5399a69edf..000000000000 --- a/arch/tile/include/asm/backtrace.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_BACKTRACE_H -#define _ASM_TILE_BACKTRACE_H - -#include <linux/types.h> - -/* Reads 'size' bytes from 'address' and writes the data to 'result'. - * Returns true if successful, else false (e.g. memory not readable). - */ -typedef bool (*BacktraceMemoryReader)(void *result, - unsigned long address, - unsigned int size, - void *extra); - -typedef struct { - /* Current PC. */ - unsigned long pc; - - /* Current stack pointer value. */ - unsigned long sp; - - /* Current frame pointer value (i.e. caller's stack pointer) */ - unsigned long fp; - - /* Internal use only: caller's PC for first frame. */ - unsigned long initial_frame_caller_pc; - - /* Internal use only: callback to read memory. */ - BacktraceMemoryReader read_memory_func; - - /* Internal use only: arbitrary argument to read_memory_func. */ - void *read_memory_func_extra; - -} BacktraceIterator; - - -typedef enum { - - /* We have no idea what the caller's pc is. */ - PC_LOC_UNKNOWN, - - /* The caller's pc is currently in lr. */ - PC_LOC_IN_LR, - - /* The caller's pc can be found by dereferencing the caller's sp. */ - PC_LOC_ON_STACK - -} CallerPCLocation; - - -typedef enum { - - /* We have no idea what the caller's sp is. */ - SP_LOC_UNKNOWN, - - /* The caller's sp is currently in r52. */ - SP_LOC_IN_R52, - - /* The caller's sp can be found by adding a certain constant - * to the current value of sp. - */ - SP_LOC_OFFSET - -} CallerSPLocation; - - -/* Bit values ORed into CALLER_* values for info ops. */ -enum { - /* Setting the low bit on any of these values means the info op - * applies only to one bundle ago. - */ - ONE_BUNDLE_AGO_FLAG = 1, - - /* Setting this bit on a CALLER_SP_* value means the PC is in LR. - * If not set, PC is on the stack. - */ - PC_IN_LR_FLAG = 2, - - /* This many of the low bits of a CALLER_SP_* value are for the - * flag bits above. - */ - NUM_INFO_OP_FLAGS = 2, - - /* We cannot have one in the memory pipe so this is the maximum. */ - MAX_INFO_OPS_PER_BUNDLE = 2 -}; - - -/* Internal constants used to define 'info' operands. */ -enum { - /* 0 and 1 are reserved, as are all negative numbers. */ - - CALLER_UNKNOWN_BASE = 2, - - CALLER_SP_IN_R52_BASE = 4, - - CALLER_SP_OFFSET_BASE = 8, -}; - - -/* Current backtracer state describing where it thinks the caller is. */ -typedef struct { - /* - * Public fields - */ - - /* How do we find the caller's PC? */ - CallerPCLocation pc_location : 8; - - /* How do we find the caller's SP? */ - CallerSPLocation sp_location : 8; - - /* If sp_location == SP_LOC_OFFSET, then caller_sp == sp + - * loc->sp_offset. Else this field is undefined. - */ - uint16_t sp_offset; - - /* In the most recently visited bundle a terminating bundle? */ - bool at_terminating_bundle; - - /* - * Private fields - */ - - /* Will the forward scanner see someone clobbering sp - * (i.e. changing it with something other than addi sp, sp, N?) - */ - bool sp_clobber_follows; - - /* Operand to next "visible" info op (no more than one bundle past - * the next terminating bundle), or -32768 if none. - */ - int16_t next_info_operand; - - /* Is the info of in next_info_op in the very next bundle? */ - bool is_next_info_operand_adjacent; - -} CallerLocation; - -extern void backtrace_init(BacktraceIterator *state, - BacktraceMemoryReader read_memory_func, - void *read_memory_func_extra, - unsigned long pc, unsigned long lr, - unsigned long sp, unsigned long r52); - - -extern bool backtrace_next(BacktraceIterator *state); - -#endif /* _ASM_TILE_BACKTRACE_H */ diff --git a/arch/tile/include/asm/barrier.h b/arch/tile/include/asm/barrier.h deleted file mode 100644 index 4c419ab95ab7..000000000000 --- a/arch/tile/include/asm/barrier.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_BARRIER_H -#define _ASM_TILE_BARRIER_H - -#ifndef __ASSEMBLY__ - -#include <linux/types.h> -#include <arch/chip.h> -#include <arch/spr_def.h> -#include <asm/timex.h> - -#define __sync() __insn_mf() - -#include <hv/syscall_public.h> -/* - * Issue an uncacheable load to each memory controller, then - * wait until those loads have completed. - */ -static inline void __mb_incoherent(void) -{ - long clobber_r10; - asm volatile("swint2" - : "=R10" (clobber_r10) - : "R10" (HV_SYS_fence_incoherent) - : "r0", "r1", "r2", "r3", "r4", - "r5", "r6", "r7", "r8", "r9", - "r11", "r12", "r13", "r14", - "r15", "r16", "r17", "r18", "r19", - "r20", "r21", "r22", "r23", "r24", - "r25", "r26", "r27", "r28", "r29"); -} - -/* Fence to guarantee visibility of stores to incoherent memory. */ -static inline void -mb_incoherent(void) -{ - __insn_mf(); - - { -#if CHIP_HAS_TILE_WRITE_PENDING() - const unsigned long WRITE_TIMEOUT_CYCLES = 400; - unsigned long start = get_cycles_low(); - do { - if (__insn_mfspr(SPR_TILE_WRITE_PENDING) == 0) - return; - } while ((get_cycles_low() - start) < WRITE_TIMEOUT_CYCLES); -#endif /* CHIP_HAS_TILE_WRITE_PENDING() */ - (void) __mb_incoherent(); - } -} - -#define fast_wmb() __sync() -#define fast_rmb() __sync() -#define fast_mb() __sync() -#define fast_iob() mb_incoherent() - -#define wmb() fast_wmb() -#define rmb() fast_rmb() -#define mb() fast_mb() -#define iob() fast_iob() - -#ifndef __tilegx__ /* 32 bit */ -/* - * We need to barrier before modifying the word, since the _atomic_xxx() - * routines just tns the lock and then read/modify/write of the word. - * But after the word is updated, the routine issues an "mf" before returning, - * and since it's a function call, we don't even need a compiler barrier. - */ -#define __smp_mb__before_atomic() __smp_mb() -#define __smp_mb__after_atomic() do { } while (0) -#define smp_mb__after_atomic() __smp_mb__after_atomic() -#else /* 64 bit */ -#define __smp_mb__before_atomic() __smp_mb() -#define __smp_mb__after_atomic() __smp_mb() -#endif - -/* - * The TILE architecture does not do speculative reads; this ensures - * that a control dependency also orders against loads and already provides - * a LOAD->{LOAD,STORE} order and can forgo the additional RMB. - */ -#define smp_acquire__after_ctrl_dep() barrier() - -#include <asm-generic/barrier.h> - -#endif /* !__ASSEMBLY__ */ -#endif /* _ASM_TILE_BARRIER_H */ diff --git a/arch/tile/include/asm/bitops.h b/arch/tile/include/asm/bitops.h deleted file mode 100644 index 20caa346ac06..000000000000 --- a/arch/tile/include/asm/bitops.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Copyright 1992, Linus Torvalds. - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_BITOPS_H -#define _ASM_TILE_BITOPS_H - -#include <linux/types.h> -#include <asm/barrier.h> - -#ifndef _LINUX_BITOPS_H -#error only <linux/bitops.h> can be included directly -#endif - -#ifdef __tilegx__ -#include <asm/bitops_64.h> -#else -#include <asm/bitops_32.h> -#endif - -/** - * ffz - find first zero bit in word - * @word: The word to search - * - * Undefined if no zero exists, so code should check against ~0UL first. - */ -static inline unsigned long ffz(unsigned long word) -{ - return __builtin_ctzl(~word); -} - -static inline int fls64(__u64 w) -{ - return (sizeof(__u64) * 8) - __builtin_clzll(w); -} - -/** - * fls - find last set bit in word - * @x: the word to search - * - * This is defined in a similar way as the libc and compiler builtin - * ffs, but returns the position of the most significant set bit. - * - * fls(value) returns 0 if value is 0 or the position of the last - * set bit if value is nonzero. The last (most significant) bit is - * at position 32. - */ -static inline int fls(int x) -{ - return fls64((unsigned int) x); -} - -static inline unsigned int __arch_hweight32(unsigned int w) -{ - return __builtin_popcount(w); -} - -static inline unsigned int __arch_hweight16(unsigned int w) -{ - return __builtin_popcount(w & 0xffff); -} - -static inline unsigned int __arch_hweight8(unsigned int w) -{ - return __builtin_popcount(w & 0xff); -} - -static inline unsigned long __arch_hweight64(__u64 w) -{ - return __builtin_popcountll(w); -} - -#include <asm-generic/bitops/builtin-__ffs.h> -#include <asm-generic/bitops/builtin-__fls.h> -#include <asm-generic/bitops/builtin-ffs.h> -#include <asm-generic/bitops/const_hweight.h> -#include <asm-generic/bitops/lock.h> -#include <asm-generic/bitops/find.h> -#include <asm-generic/bitops/sched.h> -#include <asm-generic/bitops/non-atomic.h> -#include <asm-generic/bitops/le.h> - -#endif /* _ASM_TILE_BITOPS_H */ diff --git a/arch/tile/include/asm/bitops_32.h b/arch/tile/include/asm/bitops_32.h deleted file mode 100644 index d1406a95f6b7..000000000000 --- a/arch/tile/include/asm/bitops_32.h +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_BITOPS_32_H -#define _ASM_TILE_BITOPS_32_H - -#include <linux/compiler.h> -#include <asm/barrier.h> - -/* Tile-specific routines to support <asm/bitops.h>. */ -unsigned long _atomic_fetch_or(volatile unsigned long *p, unsigned long mask); -unsigned long _atomic_fetch_andn(volatile unsigned long *p, unsigned long mask); -unsigned long _atomic_fetch_xor(volatile unsigned long *p, unsigned long mask); - -/** - * set_bit - Atomically set a bit in memory - * @nr: the bit to set - * @addr: the address to start counting from - * - * This function is atomic and may not be reordered. - * See __set_bit() if you do not require the atomic guarantees. - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - */ -static inline void set_bit(unsigned nr, volatile unsigned long *addr) -{ - _atomic_fetch_or(addr + BIT_WORD(nr), BIT_MASK(nr)); -} - -/** - * clear_bit - Clears a bit in memory - * @nr: Bit to clear - * @addr: Address to start counting from - * - * clear_bit() is atomic and may not be reordered. - * See __clear_bit() if you do not require the atomic guarantees. - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - * - * clear_bit() may not contain a memory barrier, so if it is used for - * locking purposes, you should call smp_mb__before_atomic() and/or - * smp_mb__after_atomic() to ensure changes are visible on other cpus. - */ -static inline void clear_bit(unsigned nr, volatile unsigned long *addr) -{ - _atomic_fetch_andn(addr + BIT_WORD(nr), BIT_MASK(nr)); -} - -/** - * change_bit - Toggle a bit in memory - * @nr: Bit to change - * @addr: Address to start counting from - * - * change_bit() is atomic and may not be reordered. - * See __change_bit() if you do not require the atomic guarantees. - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - */ -static inline void change_bit(unsigned nr, volatile unsigned long *addr) -{ - _atomic_fetch_xor(addr + BIT_WORD(nr), BIT_MASK(nr)); -} - -/** - * test_and_set_bit - Set a bit and return its old value - * @nr: Bit to set - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ -static inline int test_and_set_bit(unsigned nr, volatile unsigned long *addr) -{ - unsigned long mask = BIT_MASK(nr); - addr += BIT_WORD(nr); - smp_mb(); /* barrier for proper semantics */ - return (_atomic_fetch_or(addr, mask) & mask) != 0; -} - -/** - * test_and_clear_bit - Clear a bit and return its old value - * @nr: Bit to clear - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ -static inline int test_and_clear_bit(unsigned nr, volatile unsigned long *addr) -{ - unsigned long mask = BIT_MASK(nr); - addr += BIT_WORD(nr); - smp_mb(); /* barrier for proper semantics */ - return (_atomic_fetch_andn(addr, mask) & mask) != 0; -} - -/** - * test_and_change_bit - Change a bit and return its old value - * @nr: Bit to change - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ -static inline int test_and_change_bit(unsigned nr, - volatile unsigned long *addr) -{ - unsigned long mask = BIT_MASK(nr); - addr += BIT_WORD(nr); - smp_mb(); /* barrier for proper semantics */ - return (_atomic_fetch_xor(addr, mask) & mask) != 0; -} - -#include <asm-generic/bitops/ext2-atomic.h> - -#endif /* _ASM_TILE_BITOPS_32_H */ diff --git a/arch/tile/include/asm/bitops_64.h b/arch/tile/include/asm/bitops_64.h deleted file mode 100644 index bb1a29221fcd..000000000000 --- a/arch/tile/include/asm/bitops_64.h +++ /dev/null @@ -1,95 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_BITOPS_64_H -#define _ASM_TILE_BITOPS_64_H - -#include <linux/compiler.h> -#include <asm/cmpxchg.h> - -/* See <asm/bitops.h> for API comments. */ - -static inline void set_bit(unsigned nr, volatile unsigned long *addr) -{ - unsigned long mask = (1UL << (nr % BITS_PER_LONG)); - __insn_fetchor((void *)(addr + nr / BITS_PER_LONG), mask); -} - -static inline void clear_bit(unsigned nr, volatile unsigned long *addr) -{ - unsigned long mask = (1UL << (nr % BITS_PER_LONG)); - __insn_fetchand((void *)(addr + nr / BITS_PER_LONG), ~mask); -} - -static inline void change_bit(unsigned nr, volatile unsigned long *addr) -{ - unsigned long mask = (1UL << (nr % BITS_PER_LONG)); - unsigned long guess, oldval; - addr += nr / BITS_PER_LONG; - oldval = *addr; - do { - guess = oldval; - oldval = cmpxchg(addr, guess, guess ^ mask); - } while (guess != oldval); -} - - -/* - * The test_and_xxx_bit() routines require a memory fence before we - * start the operation, and after the operation completes. We use - * smp_mb() before, and rely on the "!= 0" comparison, plus a compiler - * barrier(), to block until the atomic op is complete. - */ - -static inline int test_and_set_bit(unsigned nr, volatile unsigned long *addr) -{ - int val; - unsigned long mask = (1UL << (nr % BITS_PER_LONG)); - smp_mb(); /* barrier for proper semantics */ - val = (__insn_fetchor((void *)(addr + nr / BITS_PER_LONG), mask) - & mask) != 0; - barrier(); - return val; -} - - -static inline int test_and_clear_bit(unsigned nr, volatile unsigned long *addr) -{ - int val; - unsigned long mask = (1UL << (nr % BITS_PER_LONG)); - smp_mb(); /* barrier for proper semantics */ - val = (__insn_fetchand((void *)(addr + nr / BITS_PER_LONG), ~mask) - & mask) != 0; - barrier(); - return val; -} - - -static inline int test_and_change_bit(unsigned nr, - volatile unsigned long *addr) -{ - unsigned long mask = (1UL << (nr % BITS_PER_LONG)); - unsigned long guess, oldval; - addr += nr / BITS_PER_LONG; - oldval = *addr; - do { - guess = oldval; - oldval = cmpxchg(addr, guess, guess ^ mask); - } while (guess != oldval); - return (oldval & mask) != 0; -} - -#include <asm-generic/bitops/ext2-atomic-setbit.h> - -#endif /* _ASM_TILE_BITOPS_64_H */ diff --git a/arch/tile/include/asm/cache.h b/arch/tile/include/asm/cache.h deleted file mode 100644 index 7d6aaa128e8b..000000000000 --- a/arch/tile/include/asm/cache.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_CACHE_H -#define _ASM_TILE_CACHE_H - -#include <arch/chip.h> - -/* bytes per L1 data cache line */ -#define L1_CACHE_SHIFT CHIP_L1D_LOG_LINE_SIZE() -#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) - -/* bytes per L2 cache line */ -#define L2_CACHE_SHIFT CHIP_L2_LOG_LINE_SIZE() -#define L2_CACHE_BYTES (1 << L2_CACHE_SHIFT) -#define L2_CACHE_ALIGN(x) (((x)+(L2_CACHE_BYTES-1)) & -L2_CACHE_BYTES) - -/* - * TILEPro I/O is not always coherent (networking typically uses coherent - * I/O, but PCI traffic does not) and setting ARCH_DMA_MINALIGN to the - * L2 cacheline size helps ensure that kernel heap allocations are aligned. - * TILE-Gx I/O is always coherent when used on hash-for-home pages. - * - * However, it's possible at runtime to request not to use hash-for-home - * for the kernel heap, in which case the kernel will use flush-and-inval - * to manage coherence. As a result, we use L2_CACHE_BYTES for the - * DMA minimum alignment to avoid false sharing in the kernel heap. - */ -#define ARCH_DMA_MINALIGN L2_CACHE_BYTES - -/* use the cache line size for the L2, which is where it counts */ -#define SMP_CACHE_BYTES_SHIFT L2_CACHE_SHIFT -#define SMP_CACHE_BYTES L2_CACHE_BYTES -#define INTERNODE_CACHE_SHIFT L2_CACHE_SHIFT -#define INTERNODE_CACHE_BYTES L2_CACHE_BYTES - -/* Group together read-mostly things to avoid cache false sharing */ -#define __read_mostly __attribute__((__section__(".data..read_mostly"))) - -/* - * Originally we used small TLB pages for kernel data and grouped some - * things together as ro-after-init, enforcing the property at the end - * of initialization by making those pages read-only and non-coherent. - * This allowed better cache utilization since cache inclusion did not - * need to be maintained. However, to do this requires an extra TLB - * entry, which on balance is more of a performance hit than the - * non-coherence is a performance gain, so we now just make "read - * mostly" and "ro-after-init" be synonyms. We keep the attribute - * separate in case we change our minds at a future date. - */ -#define __ro_after_init __read_mostly - -#endif /* _ASM_TILE_CACHE_H */ diff --git a/arch/tile/include/asm/cacheflush.h b/arch/tile/include/asm/cacheflush.h deleted file mode 100644 index 92ee4c8a4f76..000000000000 --- a/arch/tile/include/asm/cacheflush.h +++ /dev/null @@ -1,160 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_CACHEFLUSH_H -#define _ASM_TILE_CACHEFLUSH_H - -#include <arch/chip.h> - -/* Keep includes the same across arches. */ -#include <linux/mm.h> -#include <linux/cache.h> -#include <arch/icache.h> - -/* Caches are physically-indexed and so don't need special treatment */ -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 -#define flush_dcache_page(page) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_cache_vmap(start, end) do { } while (0) -#define flush_cache_vunmap(start, end) do { } while (0) -#define flush_icache_page(vma, pg) do { } while (0) -#define flush_icache_user_range(vma, pg, adr, len) do { } while (0) - -/* Flush the icache just on this cpu */ -extern void __flush_icache_range(unsigned long start, unsigned long end); - -/* Flush the entire icache on this cpu. */ -#define __flush_icache() __flush_icache_range(0, CHIP_L1I_CACHE_SIZE()) - -#ifdef CONFIG_SMP -/* - * When the kernel writes to its own text we need to do an SMP - * broadcast to make the L1I coherent everywhere. This includes - * module load and single step. - */ -extern void flush_icache_range(unsigned long start, unsigned long end); -#else -#define flush_icache_range __flush_icache_range -#endif - -/* - * An update to an executable user page requires icache flushing. - * We could carefully update only tiles that are running this process, - * and rely on the fact that we flush the icache on every context - * switch to avoid doing extra work here. But for now, I'll be - * conservative and just do a global icache flush. - */ -static inline void copy_to_user_page(struct vm_area_struct *vma, - struct page *page, unsigned long vaddr, - void *dst, void *src, int len) -{ - memcpy(dst, src, len); - if (vma->vm_flags & VM_EXEC) { - flush_icache_range((unsigned long) dst, - (unsigned long) dst + len); - } -} - -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy((dst), (src), (len)) - -/* Flush a VA range; pads to L2 cacheline boundaries. */ -static inline void __flush_buffer(void *buffer, size_t size) -{ - char *next = (char *)((long)buffer & -L2_CACHE_BYTES); - char *finish = (char *)L2_CACHE_ALIGN((long)buffer + size); - while (next < finish) { - __insn_flush(next); - next += CHIP_FLUSH_STRIDE(); - } -} - -/* Flush & invalidate a VA range; pads to L2 cacheline boundaries. */ -static inline void __finv_buffer(void *buffer, size_t size) -{ - char *next = (char *)((long)buffer & -L2_CACHE_BYTES); - char *finish = (char *)L2_CACHE_ALIGN((long)buffer + size); - while (next < finish) { - __insn_finv(next); - next += CHIP_FINV_STRIDE(); - } -} - - -/* - * Flush a locally-homecached VA range and wait for the evicted - * cachelines to hit memory. - */ -static inline void flush_buffer_local(void *buffer, size_t size) -{ - __flush_buffer(buffer, size); - mb_incoherent(); -} - -/* - * Flush and invalidate a locally-homecached VA range and wait for the - * evicted cachelines to hit memory. - */ -static inline void finv_buffer_local(void *buffer, size_t size) -{ - __finv_buffer(buffer, size); - mb_incoherent(); -} - -#ifdef __tilepro__ -/* Invalidate a VA range; pads to L2 cacheline boundaries. */ -static inline void __inv_buffer(void *buffer, size_t size) -{ - char *next = (char *)((long)buffer & -L2_CACHE_BYTES); - char *finish = (char *)L2_CACHE_ALIGN((long)buffer + size); - while (next < finish) { - __insn_inv(next); - next += CHIP_INV_STRIDE(); - } -} - -/* Invalidate a VA range and wait for it to be complete. */ -static inline void inv_buffer(void *buffer, size_t size) -{ - __inv_buffer(buffer, size); - mb(); -} -#endif - -/* - * Flush and invalidate a VA range that is homed remotely, waiting - * until the memory controller holds the flushed values. If "hfh" is - * true, we will do a more expensive flush involving additional loads - * to make sure we have touched all the possible home cpus of a buffer - * that is homed with "hash for home". - */ -void finv_buffer_remote(void *buffer, size_t size, int hfh); - -/* - * On SMP systems, when the scheduler does migration-cost autodetection, - * it needs a way to flush as much of the CPU's caches as possible: - * - * TODO: fill this in! - */ -static inline void sched_cacheflush(void) -{ -} - -#endif /* _ASM_TILE_CACHEFLUSH_H */ diff --git a/arch/tile/include/asm/checksum.h b/arch/tile/include/asm/checksum.h deleted file mode 100644 index b21a2fdec9f7..000000000000 --- a/arch/tile/include/asm/checksum.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_CHECKSUM_H -#define _ASM_TILE_CHECKSUM_H - -#include <asm-generic/checksum.h> - -/* Allow us to provide a more optimized do_csum(). */ -__wsum do_csum(const unsigned char *buff, int len); -#define do_csum do_csum - -/* - * Return the sum of all the 16-bit subwords in a long. - * This sums two subwords on a 32-bit machine, and four on 64 bits. - * The implementation does two vector adds to capture any overflow. - */ -static inline unsigned int csum_long(unsigned long x) -{ - unsigned long ret; -#ifdef __tilegx__ - ret = __insn_v2sadu(x, 0); - ret = __insn_v2sadu(ret, 0); -#else - ret = __insn_sadh_u(x, 0); - ret = __insn_sadh_u(ret, 0); -#endif - return ret; -} - -#endif /* _ASM_TILE_CHECKSUM_H */ diff --git a/arch/tile/include/asm/cmpxchg.h b/arch/tile/include/asm/cmpxchg.h deleted file mode 100644 index 25d5899497be..000000000000 --- a/arch/tile/include/asm/cmpxchg.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * cmpxchg.h -- forked from asm/atomic.h with this copyright: - * - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - */ - -#ifndef _ASM_TILE_CMPXCHG_H -#define _ASM_TILE_CMPXCHG_H - -#ifndef __ASSEMBLY__ - -#include <asm/barrier.h> - -/* Nonexistent functions intended to cause compile errors. */ -extern void __xchg_called_with_bad_pointer(void) - __compiletime_error("Bad argument size for xchg"); -extern void __cmpxchg_called_with_bad_pointer(void) - __compiletime_error("Bad argument size for cmpxchg"); - -#ifndef __tilegx__ - -/* Note the _atomic_xxx() routines include a final mb(). */ -int _atomic_xchg(int *ptr, int n); -int _atomic_xchg_add(int *v, int i); -int _atomic_xchg_add_unless(int *v, int a, int u); -int _atomic_cmpxchg(int *ptr, int o, int n); -long long _atomic64_xchg(long long *v, long long n); -long long _atomic64_xchg_add(long long *v, long long i); -long long _atomic64_xchg_add_unless(long long *v, long long a, long long u); -long long _atomic64_cmpxchg(long long *v, long long o, long long n); - -#define xchg(ptr, n) \ - ({ \ - if (sizeof(*(ptr)) != 4) \ - __xchg_called_with_bad_pointer(); \ - smp_mb(); \ - (typeof(*(ptr)))_atomic_xchg((int *)(ptr), (int)(n)); \ - }) - -#define cmpxchg(ptr, o, n) \ - ({ \ - if (sizeof(*(ptr)) != 4) \ - __cmpxchg_called_with_bad_pointer(); \ - smp_mb(); \ - (typeof(*(ptr)))_atomic_cmpxchg((int *)ptr, (int)o, \ - (int)n); \ - }) - -#define xchg64(ptr, n) \ - ({ \ - if (sizeof(*(ptr)) != 8) \ - __xchg_called_with_bad_pointer(); \ - smp_mb(); \ - (typeof(*(ptr)))_atomic64_xchg((long long *)(ptr), \ - (long long)(n)); \ - }) - -#define cmpxchg64(ptr, o, n) \ - ({ \ - if (sizeof(*(ptr)) != 8) \ - __cmpxchg_called_with_bad_pointer(); \ - smp_mb(); \ - (typeof(*(ptr)))_atomic64_cmpxchg((long long *)ptr, \ - (long long)o, (long long)n); \ - }) - -#else - -#define xchg(ptr, n) \ - ({ \ - typeof(*(ptr)) __x; \ - smp_mb(); \ - switch (sizeof(*(ptr))) { \ - case 4: \ - __x = (typeof(__x))(unsigned long) \ - __insn_exch4((ptr), \ - (u32)(unsigned long)(n)); \ - break; \ - case 8: \ - __x = (typeof(__x)) \ - __insn_exch((ptr), (unsigned long)(n)); \ - break; \ - default: \ - __xchg_called_with_bad_pointer(); \ - break; \ - } \ - smp_mb(); \ - __x; \ - }) - -#define cmpxchg(ptr, o, n) \ - ({ \ - typeof(*(ptr)) __x; \ - __insn_mtspr(SPR_CMPEXCH_VALUE, (unsigned long)(o)); \ - smp_mb(); \ - switch (sizeof(*(ptr))) { \ - case 4: \ - __x = (typeof(__x))(unsigned long) \ - __insn_cmpexch4((ptr), \ - (u32)(unsigned long)(n)); \ - break; \ - case 8: \ - __x = (typeof(__x))__insn_cmpexch((ptr), \ - (long long)(n)); \ - break; \ - default: \ - __cmpxchg_called_with_bad_pointer(); \ - break; \ - } \ - smp_mb(); \ - __x; \ - }) - -#define xchg64 xchg -#define cmpxchg64 cmpxchg - -#endif - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_TILE_CMPXCHG_H */ diff --git a/arch/tile/include/asm/compat.h b/arch/tile/include/asm/compat.h deleted file mode 100644 index 769ff6ac0bf5..000000000000 --- a/arch/tile/include/asm/compat.h +++ /dev/null @@ -1,233 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_COMPAT_H -#define _ASM_TILE_COMPAT_H - -/* - * Architecture specific compatibility types - */ -#include <linux/types.h> -#include <linux/sched.h> - -#define COMPAT_USER_HZ 100 - -/* "long" and pointer-based types are different. */ -typedef s32 compat_long_t; -typedef u32 compat_ulong_t; -typedef u32 compat_size_t; -typedef s32 compat_ssize_t; -typedef s32 compat_off_t; -typedef s32 compat_time_t; -typedef s32 compat_clock_t; -typedef u32 compat_ino_t; -typedef u32 compat_caddr_t; -typedef u32 compat_uptr_t; - -/* Many types are "int" or otherwise the same. */ -typedef __kernel_pid_t compat_pid_t; -typedef __kernel_uid_t __compat_uid_t; -typedef __kernel_gid_t __compat_gid_t; -typedef __kernel_uid32_t __compat_uid32_t; -typedef __kernel_uid32_t __compat_gid32_t; -typedef __kernel_mode_t compat_mode_t; -typedef __kernel_dev_t compat_dev_t; -typedef __kernel_loff_t compat_loff_t; -typedef __kernel_ipc_pid_t compat_ipc_pid_t; -typedef __kernel_daddr_t compat_daddr_t; -typedef __kernel_fsid_t compat_fsid_t; -typedef __kernel_timer_t compat_timer_t; -typedef __kernel_key_t compat_key_t; -typedef int compat_int_t; -typedef s64 compat_s64; -typedef uint compat_uint_t; -typedef u64 compat_u64; - -/* We use the same register dump format in 32-bit images. */ -typedef unsigned long compat_elf_greg_t; -#define COMPAT_ELF_NGREG (sizeof(struct pt_regs) / sizeof(compat_elf_greg_t)) -typedef compat_elf_greg_t compat_elf_gregset_t[COMPAT_ELF_NGREG]; - -struct compat_timespec { - compat_time_t tv_sec; - s32 tv_nsec; -}; - -struct compat_timeval { - compat_time_t tv_sec; - s32 tv_usec; -}; - -#define compat_stat stat -#define compat_statfs statfs - -struct compat_sysctl { - unsigned int name; - int nlen; - unsigned int oldval; - unsigned int oldlenp; - unsigned int newval; - unsigned int newlen; - unsigned int __unused[4]; -}; - - -struct compat_flock { - short l_type; - short l_whence; - compat_off_t l_start; - compat_off_t l_len; - compat_pid_t l_pid; -}; - -#define F_GETLK64 12 /* using 'struct flock64' */ -#define F_SETLK64 13 -#define F_SETLKW64 14 - -struct compat_flock64 { - short l_type; - short l_whence; - compat_loff_t l_start; - compat_loff_t l_len; - compat_pid_t l_pid; -}; - -#define COMPAT_RLIM_INFINITY 0xffffffff - -#define _COMPAT_NSIG 64 -#define _COMPAT_NSIG_BPW 32 - -typedef u32 compat_sigset_word; - -#define COMPAT_OFF_T_MAX 0x7fffffff - -struct compat_ipc64_perm { - compat_key_t key; - __compat_uid32_t uid; - __compat_gid32_t gid; - __compat_uid32_t cuid; - __compat_gid32_t cgid; - unsigned short mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - compat_ulong_t unused1; - compat_ulong_t unused2; -}; - -struct compat_semid64_ds { - struct compat_ipc64_perm sem_perm; - compat_time_t sem_otime; - compat_ulong_t __unused1; - compat_time_t sem_ctime; - compat_ulong_t __unused2; - compat_ulong_t sem_nsems; - compat_ulong_t __unused3; - compat_ulong_t __unused4; -}; - -struct compat_msqid64_ds { - struct compat_ipc64_perm msg_perm; - compat_time_t msg_stime; - compat_ulong_t __unused1; - compat_time_t msg_rtime; - compat_ulong_t __unused2; - compat_time_t msg_ctime; - compat_ulong_t __unused3; - compat_ulong_t msg_cbytes; - compat_ulong_t msg_qnum; - compat_ulong_t msg_qbytes; - compat_pid_t msg_lspid; - compat_pid_t msg_lrpid; - compat_ulong_t __unused4; - compat_ulong_t __unused5; -}; - -struct compat_shmid64_ds { - struct compat_ipc64_perm shm_perm; - compat_size_t shm_segsz; - compat_time_t shm_atime; - compat_ulong_t __unused1; - compat_time_t shm_dtime; - compat_ulong_t __unused2; - compat_time_t shm_ctime; - compat_ulong_t __unused3; - compat_pid_t shm_cpid; - compat_pid_t shm_lpid; - compat_ulong_t shm_nattch; - compat_ulong_t __unused4; - compat_ulong_t __unused5; -}; - -/* - * A pointer passed in from user mode. This should not - * be used for syscall parameters, just declare them - * as pointers because the syscall entry code will have - * appropriately converted them already. - */ - -static inline void __user *compat_ptr(compat_uptr_t uptr) -{ - return (void __user *)(long)(s32)uptr; -} - -static inline compat_uptr_t ptr_to_compat(void __user *uptr) -{ - return (u32)(unsigned long)uptr; -} - -/* Sign-extend when storing a kernel pointer to a user's ptregs. */ -static inline unsigned long ptr_to_compat_reg(void __user *uptr) -{ - return (long)(int)(long __force)uptr; -} - -static inline void __user *arch_compat_alloc_user_space(long len) -{ - struct pt_regs *regs = task_pt_regs(current); - return (void __user *)regs->sp - len; -} - -static inline int is_compat_task(void) -{ - return current_thread_info()->status & TS_COMPAT; -} - -extern int compat_setup_rt_frame(struct ksignal *ksig, sigset_t *set, - struct pt_regs *regs); - -/* Compat syscalls. */ -struct compat_siginfo; -struct compat_sigaltstack; -long compat_sys_rt_sigreturn(void); -long compat_sys_truncate64(char __user *filename, u32 dummy, u32 low, u32 high); -long compat_sys_ftruncate64(unsigned int fd, u32 dummy, u32 low, u32 high); -long compat_sys_pread64(unsigned int fd, char __user *ubuf, size_t count, - u32 dummy, u32 low, u32 high); -long compat_sys_pwrite64(unsigned int fd, char __user *ubuf, size_t count, - u32 dummy, u32 low, u32 high); -long compat_sys_sync_file_range2(int fd, unsigned int flags, - u32 offset_lo, u32 offset_hi, - u32 nbytes_lo, u32 nbytes_hi); -long compat_sys_fallocate(int fd, int mode, - u32 offset_lo, u32 offset_hi, - u32 len_lo, u32 len_hi); -long compat_sys_llseek(unsigned int fd, unsigned int offset_high, - unsigned int offset_low, loff_t __user * result, - unsigned int origin); - -/* Assembly trampoline to avoid clobbering r0. */ -long _compat_sys_rt_sigreturn(void); - -#endif /* _ASM_TILE_COMPAT_H */ diff --git a/arch/tile/include/asm/current.h b/arch/tile/include/asm/current.h deleted file mode 100644 index da21acf020d3..000000000000 --- a/arch/tile/include/asm/current.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_CURRENT_H -#define _ASM_TILE_CURRENT_H - -#include <linux/thread_info.h> - -struct task_struct; - -static inline struct task_struct *get_current(void) -{ - return current_thread_info()->task; -} -#define current get_current() - -/* Return a usable "task_struct" pointer even if the real one is corrupt. */ -struct task_struct *validate_current(void); - -#endif /* _ASM_TILE_CURRENT_H */ diff --git a/arch/tile/include/asm/delay.h b/arch/tile/include/asm/delay.h deleted file mode 100644 index 97b0e69e704e..000000000000 --- a/arch/tile/include/asm/delay.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_DELAY_H -#define _ASM_TILE_DELAY_H - -/* Undefined functions to get compile-time errors. */ -extern void __bad_udelay(void); -extern void __bad_ndelay(void); - -extern void __udelay(unsigned long usecs); -extern void __ndelay(unsigned long nsecs); -extern void __delay(unsigned long loops); - -#define udelay(n) (__builtin_constant_p(n) ? \ - ((n) > 20000 ? __bad_udelay() : __ndelay((n) * 1000)) : \ - __udelay(n)) - -#define ndelay(n) (__builtin_constant_p(n) ? \ - ((n) > 20000 ? __bad_ndelay() : __ndelay(n)) : \ - __ndelay(n)) - -#endif /* _ASM_TILE_DELAY_H */ diff --git a/arch/tile/include/asm/device.h b/arch/tile/include/asm/device.h deleted file mode 100644 index 1cf45422a0df..000000000000 --- a/arch/tile/include/asm/device.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * Arch specific extensions to struct device - */ - -#ifndef _ASM_TILE_DEVICE_H -#define _ASM_TILE_DEVICE_H - -struct dev_archdata { - /* Offset of the DMA address from the PA. */ - dma_addr_t dma_offset; - - /* - * Highest DMA address that can be generated by devices that - * have limited DMA capability, i.e. non 64-bit capable. - */ - dma_addr_t max_direct_dma_addr; -}; - -struct pdev_archdata { -}; - -#endif /* _ASM_TILE_DEVICE_H */ diff --git a/arch/tile/include/asm/div64.h b/arch/tile/include/asm/div64.h deleted file mode 100644 index a0a798344d5f..000000000000 --- a/arch/tile/include/asm/div64.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_TILE_DIV64_H -#define _ASM_TILE_DIV64_H - -#include <linux/types.h> - -#ifdef __tilegx__ -static inline u64 mul_u32_u32(u32 a, u32 b) -{ - return __insn_mul_lu_lu(a, b); -} -#define mul_u32_u32 mul_u32_u32 -#endif - -#include <asm-generic/div64.h> - -#endif /* _ASM_TILE_DIV64_H */ diff --git a/arch/tile/include/asm/dma-mapping.h b/arch/tile/include/asm/dma-mapping.h deleted file mode 100644 index d25fce101fc0..000000000000 --- a/arch/tile/include/asm/dma-mapping.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_DMA_MAPPING_H -#define _ASM_TILE_DMA_MAPPING_H - -#include <linux/mm.h> -#include <linux/scatterlist.h> -#include <linux/cache.h> -#include <linux/io.h> - -#ifdef __tilegx__ -#define ARCH_HAS_DMA_GET_REQUIRED_MASK -#endif - -extern const struct dma_map_ops *tile_dma_map_ops; -extern const struct dma_map_ops *gx_pci_dma_map_ops; -extern const struct dma_map_ops *gx_legacy_pci_dma_map_ops; -extern const struct dma_map_ops *gx_hybrid_pci_dma_map_ops; - -static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus) -{ - return tile_dma_map_ops; -} - -static inline dma_addr_t get_dma_offset(struct device *dev) -{ - return dev->archdata.dma_offset; -} - -static inline void set_dma_offset(struct device *dev, dma_addr_t off) -{ - dev->archdata.dma_offset = off; -} - -#define HAVE_ARCH_DMA_SET_MASK 1 -int dma_set_mask(struct device *dev, u64 mask); - -#endif /* _ASM_TILE_DMA_MAPPING_H */ diff --git a/arch/tile/include/asm/dma.h b/arch/tile/include/asm/dma.h deleted file mode 100644 index 12a7ca16d164..000000000000 --- a/arch/tile/include/asm/dma.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_DMA_H -#define _ASM_TILE_DMA_H - -#include <asm-generic/dma.h> - -/* Needed by drivers/pci/quirks.c */ -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#endif - -#endif /* _ASM_TILE_DMA_H */ diff --git a/arch/tile/include/asm/elf.h b/arch/tile/include/asm/elf.h deleted file mode 100644 index e9d54a06736f..000000000000 --- a/arch/tile/include/asm/elf.h +++ /dev/null @@ -1,182 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_ELF_H -#define _ASM_TILE_ELF_H - -/* - * ELF register definitions. - */ - -#include <arch/chip.h> - -#include <linux/ptrace.h> -#include <linux/elf-em.h> -#include <asm/byteorder.h> -#include <asm/page.h> - -typedef unsigned long elf_greg_t; - -#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -/* Provide a nominal data structure. */ -#define ELF_NFPREG 0 -typedef double elf_fpreg_t; -typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; - -#ifdef __tilegx__ -#define ELF_CLASS ELFCLASS64 -#else -#define ELF_CLASS ELFCLASS32 -#endif -#ifdef __BIG_ENDIAN__ -#define ELF_DATA ELFDATA2MSB -#else -#define ELF_DATA ELFDATA2LSB -#endif - -/* - * There seems to be a bug in how compat_binfmt_elf.c works: it - * #undefs ELF_ARCH, but it is then used in binfmt_elf.c for fill_note_info(). - * Hack around this by providing an enum value of ELF_ARCH. - */ -enum { ELF_ARCH = CHIP_ELF_TYPE() }; -#define ELF_ARCH ELF_ARCH - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) \ - ((x)->e_ident[EI_CLASS] == ELF_CLASS && \ - (x)->e_ident[EI_DATA] == ELF_DATA && \ - (x)->e_machine == CHIP_ELF_TYPE()) - -/* The module loader only handles a few relocation types. */ -#ifndef __tilegx__ -#define R_TILE_32 1 -#define R_TILE_JOFFLONG_X1 15 -#define R_TILE_IMM16_X0_LO 25 -#define R_TILE_IMM16_X1_LO 26 -#define R_TILE_IMM16_X0_HA 29 -#define R_TILE_IMM16_X1_HA 30 -#else -#define R_TILEGX_64 1 -#define R_TILEGX_JUMPOFF_X1 21 -#define R_TILEGX_IMM16_X0_HW0 36 -#define R_TILEGX_IMM16_X1_HW0 37 -#define R_TILEGX_IMM16_X0_HW1 38 -#define R_TILEGX_IMM16_X1_HW1 39 -#define R_TILEGX_IMM16_X0_HW2_LAST 48 -#define R_TILEGX_IMM16_X1_HW2_LAST 49 -#endif - -/* Use standard page size for core dumps. */ -#define ELF_EXEC_PAGESIZE PAGE_SIZE - -/* - * This is the location that an ET_DYN program is loaded if exec'ed. Typical - * use of this is to invoke "./ld.so someprog" to test out a new version of - * the loader. We need to make sure that it is out of the way of the program - * that it will "exec", and that there is sufficient room for the brk. - */ -#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2) - -#define ELF_CORE_COPY_REGS(_dest, _regs) \ - memcpy((char *) &_dest, (char *) _regs, \ - sizeof(struct pt_regs)); - -/* No additional FP registers to copy. */ -#define ELF_CORE_COPY_FPREGS(t, fpu) 0 - -/* - * This yields a mask that user programs can use to figure out what - * instruction set this CPU supports. This could be done in user space, - * but it's not easy, and we've already done it here. - */ -#define ELF_HWCAP (0) - -/* - * This yields a string that ld.so will use to load implementation - * specific libraries for optimization. This is more specific in - * intent than poking at uname or /proc/cpuinfo. - */ -#define ELF_PLATFORM (NULL) - -extern void elf_plat_init(struct pt_regs *regs, unsigned long load_addr); - -#define ELF_PLAT_INIT(_r, load_addr) elf_plat_init(_r, load_addr) - -extern int dump_task_regs(struct task_struct *, elf_gregset_t *); -#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs) - -/* Tilera Linux has no personalities currently, so no need to do anything. */ -#define SET_PERSONALITY(ex) do { } while (0) - -#define ARCH_HAS_SETUP_ADDITIONAL_PAGES -/* Support auto-mapping of the user interrupt vectors. */ -struct linux_binprm; -extern int arch_setup_additional_pages(struct linux_binprm *bprm, - int executable_stack); -/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */ -#define ARCH_DLINFO \ -do { \ - NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); \ -} while (0) - -struct mm_struct; -extern unsigned long arch_randomize_brk(struct mm_struct *mm); -#define arch_randomize_brk arch_randomize_brk - -#ifdef CONFIG_COMPAT - -#define COMPAT_ELF_PLATFORM "tilegx-m32" - -/* - * "Compat" binaries have the same machine type, but 32-bit class, - * since they're not a separate machine type, but just a 32-bit - * variant of the standard 64-bit architecture. - */ -#define compat_elf_check_arch(x) \ - ((x)->e_ident[EI_CLASS] == ELFCLASS32 && \ - (x)->e_machine == CHIP_ELF_TYPE()) - -#define compat_start_thread(regs, ip, usp) do { \ - regs->pc = ptr_to_compat_reg((void *)(ip)); \ - regs->sp = ptr_to_compat_reg((void *)(usp)); \ - single_step_execve(); \ - } while (0) - -/* - * Use SET_PERSONALITY to indicate compatibility via TS_COMPAT. - */ -#undef SET_PERSONALITY -#define SET_PERSONALITY(ex) \ -do { \ - set_personality(PER_LINUX | (current->personality & (~PER_MASK))); \ - current_thread_info()->status &= ~TS_COMPAT; \ -} while (0) -#define COMPAT_SET_PERSONALITY(ex) \ -do { \ - set_personality(PER_LINUX | (current->personality & (~PER_MASK))); \ - current_thread_info()->status |= TS_COMPAT; \ -} while (0) - -#define COMPAT_ELF_ET_DYN_BASE (0xffffffff / 3 * 2) - -#endif /* CONFIG_COMPAT */ - -#define CORE_DUMP_USE_REGSET - -#endif /* _ASM_TILE_ELF_H */ diff --git a/arch/tile/include/asm/fixmap.h b/arch/tile/include/asm/fixmap.h deleted file mode 100644 index ffe2637aeb31..000000000000 --- a/arch/tile/include/asm/fixmap.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Copyright (C) 1998 Ingo Molnar - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_FIXMAP_H -#define _ASM_TILE_FIXMAP_H - -#include <asm/page.h> - -#ifndef __ASSEMBLY__ -#include <linux/kernel.h> -#ifdef CONFIG_HIGHMEM -#include <linux/threads.h> -#include <asm/kmap_types.h> -#endif - -/* - * Here we define all the compile-time 'special' virtual - * addresses. The point is to have a constant address at - * compile time, but to set the physical address only - * in the boot process. We allocate these special addresses - * from the end of supervisor virtual memory backwards. - * Also this lets us do fail-safe vmalloc(), we - * can guarantee that these special addresses and - * vmalloc()-ed addresses never overlap. - * - * these 'compile-time allocated' memory buffers are - * fixed-size 4k pages. (or larger if used with an increment - * higher than 1) use fixmap_set(idx,phys) to associate - * physical memory with fixmap indices. - * - * TLB entries of such buffers will not be flushed across - * task switches. - */ -enum fixed_addresses { -#ifdef __tilegx__ - /* - * TILEPro has unmapped memory above so the hole isn't needed, - * and in any case the hole pushes us over a single 16MB pmd. - */ - FIX_HOLE, -#endif -#ifdef CONFIG_HIGHMEM - FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ - FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, -#endif -#ifdef __tilegx__ /* see homecache.c */ - FIX_HOMECACHE_BEGIN, - FIX_HOMECACHE_END = FIX_HOMECACHE_BEGIN+(NR_CPUS)-1, -#endif - __end_of_permanent_fixed_addresses, - - /* - * Temporary boot-time mappings, used before ioremap() is functional. - * Not currently needed by the Tile architecture. - */ -#define NR_FIX_BTMAPS 0 -#if NR_FIX_BTMAPS - FIX_BTMAP_END = __end_of_permanent_fixed_addresses, - FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS - 1, - __end_of_fixed_addresses -#else - __end_of_fixed_addresses = __end_of_permanent_fixed_addresses -#endif -}; - -#define __FIXADDR_SIZE (__end_of_permanent_fixed_addresses << PAGE_SHIFT) -#define __FIXADDR_BOOT_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) -#define FIXADDR_START (FIXADDR_TOP + PAGE_SIZE - __FIXADDR_SIZE) -#define FIXADDR_BOOT_START (FIXADDR_TOP + PAGE_SIZE - __FIXADDR_BOOT_SIZE) - -#include <asm-generic/fixmap.h> - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_TILE_FIXMAP_H */ diff --git a/arch/tile/include/asm/ftrace.h b/arch/tile/include/asm/ftrace.h deleted file mode 100644 index 738d239b792f..000000000000 --- a/arch/tile/include/asm/ftrace.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_FTRACE_H -#define _ASM_TILE_FTRACE_H - -#ifdef CONFIG_FUNCTION_TRACER - -#define MCOUNT_ADDR ((unsigned long)(__mcount)) -#define MCOUNT_INSN_SIZE 8 /* sizeof mcount call */ - -#ifndef __ASSEMBLY__ -extern void __mcount(void); - -#define ARCH_SUPPORTS_FTRACE_OPS 1 - -#ifdef CONFIG_DYNAMIC_FTRACE -static inline unsigned long ftrace_call_adjust(unsigned long addr) -{ - return addr; -} - -struct dyn_arch_ftrace { -}; -#endif /* CONFIG_DYNAMIC_FTRACE */ - -#endif /* __ASSEMBLY__ */ - -#endif /* CONFIG_FUNCTION_TRACER */ - -#endif /* _ASM_TILE_FTRACE_H */ diff --git a/arch/tile/include/asm/futex.h b/arch/tile/include/asm/futex.h deleted file mode 100644 index 83c1e639b411..000000000000 --- a/arch/tile/include/asm/futex.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * These routines make two important assumptions: - * - * 1. atomic_t is really an int and can be freely cast back and forth - * (validated in __init_atomic_per_cpu). - * - * 2. userspace uses sys_cmpxchg() for all atomic operations, thus using - * the same locking convention that all the kernel atomic routines use. - */ - -#ifndef _ASM_TILE_FUTEX_H -#define _ASM_TILE_FUTEX_H - -#ifndef __ASSEMBLY__ - -#include <linux/futex.h> -#include <linux/uaccess.h> -#include <linux/errno.h> -#include <asm/atomic.h> - -/* - * Support macros for futex operations. Do not use these macros directly. - * They assume "ret", "val", "oparg", and "uaddr" in the lexical context. - * __futex_cmpxchg() additionally assumes "oldval". - */ - -#ifdef __tilegx__ - -#define __futex_asm(OP) \ - asm("1: {" #OP " %1, %3, %4; movei %0, 0 }\n" \ - ".pushsection .fixup,\"ax\"\n" \ - "0: { movei %0, %5; j 9f }\n" \ - ".section __ex_table,\"a\"\n" \ - ".align 8\n" \ - ".quad 1b, 0b\n" \ - ".popsection\n" \ - "9:" \ - : "=r" (ret), "=r" (val), "+m" (*(uaddr)) \ - : "r" (uaddr), "r" (oparg), "i" (-EFAULT)) - -#define __futex_set() __futex_asm(exch4) -#define __futex_add() __futex_asm(fetchadd4) -#define __futex_or() __futex_asm(fetchor4) -#define __futex_andn() ({ oparg = ~oparg; __futex_asm(fetchand4); }) -#define __futex_cmpxchg() \ - ({ __insn_mtspr(SPR_CMPEXCH_VALUE, oldval); __futex_asm(cmpexch4); }) - -#define __futex_xor() \ - ({ \ - u32 oldval, n = oparg; \ - if ((ret = __get_user(oldval, uaddr)) == 0) { \ - do { \ - oparg = oldval ^ n; \ - __futex_cmpxchg(); \ - } while (ret == 0 && oldval != val); \ - } \ - }) - -/* No need to prefetch, since the atomic ops go to the home cache anyway. */ -#define __futex_prolog() - -#else - -#define __futex_call(FN) \ - { \ - struct __get_user gu = FN((u32 __force *)uaddr, lock, oparg); \ - val = gu.val; \ - ret = gu.err; \ - } - -#define __futex_set() __futex_call(__atomic32_xchg) -#define __futex_add() __futex_call(__atomic32_xchg_add) -#define __futex_or() __futex_call(__atomic32_fetch_or) -#define __futex_andn() __futex_call(__atomic32_fetch_andn) -#define __futex_xor() __futex_call(__atomic32_fetch_xor) - -#define __futex_cmpxchg() \ - { \ - struct __get_user gu = __atomic32_cmpxchg((u32 __force *)uaddr, \ - lock, oldval, oparg); \ - val = gu.val; \ - ret = gu.err; \ - } - -/* - * Find the lock pointer for the atomic calls to use, and issue a - * prefetch to the user address to bring it into cache. Similar to - * __atomic_setup(), but we can't do a read into the L1 since it might - * fault; instead we do a prefetch into the L2. - */ -#define __futex_prolog() \ - int *lock; \ - __insn_prefetch(uaddr); \ - lock = __atomic_hashed_lock((int __force *)uaddr) -#endif - -static inline int arch_futex_atomic_op_inuser(int op, u32 oparg, int *oval, - u32 __user *uaddr) -{ - int uninitialized_var(val), ret; - - __futex_prolog(); - - /* The 32-bit futex code makes this assumption, so validate it here. */ - BUILD_BUG_ON(sizeof(atomic_t) != sizeof(int)); - - pagefault_disable(); - switch (op) { - case FUTEX_OP_SET: - __futex_set(); - break; - case FUTEX_OP_ADD: - __futex_add(); - break; - case FUTEX_OP_OR: - __futex_or(); - break; - case FUTEX_OP_ANDN: - __futex_andn(); - break; - case FUTEX_OP_XOR: - __futex_xor(); - break; - default: - ret = -ENOSYS; - break; - } - pagefault_enable(); - - if (!ret) - *oval = val; - - return ret; -} - -static inline int futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, - u32 oldval, u32 oparg) -{ - int ret, val; - - __futex_prolog(); - - if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) - return -EFAULT; - - __futex_cmpxchg(); - - *uval = val; - return ret; -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_TILE_FUTEX_H */ diff --git a/arch/tile/include/asm/hardirq.h b/arch/tile/include/asm/hardirq.h deleted file mode 100644 index 54110af23985..000000000000 --- a/arch/tile/include/asm/hardirq.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_HARDIRQ_H -#define _ASM_TILE_HARDIRQ_H - -#include <linux/threads.h> -#include <linux/cache.h> - -#include <asm/irq.h> - -typedef struct { - unsigned int __softirq_pending; - long idle_timestamp; - - /* Hard interrupt statistics. */ - unsigned int irq_timer_count; - unsigned int irq_syscall_count; - unsigned int irq_resched_count; - unsigned int irq_hv_flush_count; - unsigned int irq_call_count; - unsigned int irq_hv_msg_count; - unsigned int irq_dev_intr_count; - -} ____cacheline_aligned irq_cpustat_t; - -DECLARE_PER_CPU(irq_cpustat_t, irq_stat); - -#define __ARCH_IRQ_STAT -#define __IRQ_STAT(cpu, member) (per_cpu(irq_stat, cpu).member) - -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ - -#endif /* _ASM_TILE_HARDIRQ_H */ diff --git a/arch/tile/include/asm/hardwall.h b/arch/tile/include/asm/hardwall.h deleted file mode 100644 index 44d2765bde2b..000000000000 --- a/arch/tile/include/asm/hardwall.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Provide methods for access control of per-cpu resources like - * UDN, IDN, or IPI. - */ -#ifndef _ASM_TILE_HARDWALL_H -#define _ASM_TILE_HARDWALL_H - -#include <uapi/asm/hardwall.h> - -/* /proc hooks for hardwall. */ -struct proc_dir_entry; -#ifdef CONFIG_HARDWALL -void proc_tile_hardwall_init(struct proc_dir_entry *root); -int proc_pid_hardwall(struct seq_file *m, struct pid_namespace *ns, struct pid *pid, struct task_struct *task); -#else -static inline void proc_tile_hardwall_init(struct proc_dir_entry *root) {} -#endif -#endif /* _ASM_TILE_HARDWALL_H */ diff --git a/arch/tile/include/asm/highmem.h b/arch/tile/include/asm/highmem.h deleted file mode 100644 index 979579b38e57..000000000000 --- a/arch/tile/include/asm/highmem.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Copyright (C) 1999 Gerhard Wichert, Siemens AG - * Gerhard.Wichert@pdb.siemens.de - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Used in CONFIG_HIGHMEM systems for memory pages which - * are not addressable by direct kernel virtual addresses. - * - */ - -#ifndef _ASM_TILE_HIGHMEM_H -#define _ASM_TILE_HIGHMEM_H - -#include <linux/interrupt.h> -#include <linux/threads.h> -#include <asm/tlbflush.h> -#include <asm/homecache.h> - -/* declarations for highmem.c */ -extern unsigned long highstart_pfn, highend_pfn; - -extern pte_t *pkmap_page_table; - -/* - * Ordering is: - * - * FIXADDR_TOP - * fixed_addresses - * FIXADDR_START - * temp fixed addresses - * FIXADDR_BOOT_START - * Persistent kmap area - * PKMAP_BASE - * VMALLOC_END - * Vmalloc area - * VMALLOC_START - * high_memory - */ -#define LAST_PKMAP_MASK (LAST_PKMAP-1) -#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT) -#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) - -void *kmap_high(struct page *page); -void kunmap_high(struct page *page); -void *kmap(struct page *page); -void kunmap(struct page *page); -void *kmap_fix_kpte(struct page *page, int finished); - -/* This macro is used only in map_new_virtual() to map "page". */ -#define kmap_prot page_to_kpgprot(page) - -void *kmap_atomic(struct page *page); -void __kunmap_atomic(void *kvaddr); -void *kmap_atomic_pfn(unsigned long pfn); -void *kmap_atomic_prot_pfn(unsigned long pfn, pgprot_t prot); -void *kmap_atomic_prot(struct page *page, pgprot_t prot); -void kmap_atomic_fix_kpte(struct page *page, int finished); - -#define flush_cache_kmaps() do { } while (0) - -#endif /* _ASM_TILE_HIGHMEM_H */ diff --git a/arch/tile/include/asm/homecache.h b/arch/tile/include/asm/homecache.h deleted file mode 100644 index 7ddd1b8d6910..000000000000 --- a/arch/tile/include/asm/homecache.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Handle issues around the Tile "home cache" model of coherence. - */ - -#ifndef _ASM_TILE_HOMECACHE_H -#define _ASM_TILE_HOMECACHE_H - -#include <asm/page.h> -#include <linux/cpumask.h> - -struct page; -struct task_struct; -struct vm_area_struct; -struct zone; - -/* - * Coherence point for the page is its memory controller. - * It is not present in any cache (L1 or L2). - */ -#define PAGE_HOME_UNCACHED -1 - -/* - * Is this page immutable (unwritable) and thus able to be cached more - * widely than would otherwise be possible? This means we have "nc" set. - */ -#define PAGE_HOME_IMMUTABLE -2 - -/* - * Each cpu considers its own cache to be the home for the page, - * which makes it incoherent. - */ -#define PAGE_HOME_INCOHERENT -3 - -/* Home for the page is distributed via hash-for-home. */ -#define PAGE_HOME_HASH -4 - -/* Support wrapper to use instead of explicit hv_flush_remote(). */ -extern void flush_remote(unsigned long cache_pfn, unsigned long cache_length, - const struct cpumask *cache_cpumask, - HV_VirtAddr tlb_va, unsigned long tlb_length, - unsigned long tlb_pgsize, - const struct cpumask *tlb_cpumask, - HV_Remote_ASID *asids, int asidcount); - -/* Set homing-related bits in a PTE (can also pass a pgprot_t). */ -extern pte_t pte_set_home(pte_t pte, int home); - -/* Do a cache eviction on the specified cpus. */ -extern void homecache_evict(const struct cpumask *mask); - -/* - * Change a kernel page's homecache. It must not be mapped in user space. - * If !CONFIG_HOMECACHE, only usable on LOWMEM, and can only be called when - * no other cpu can reference the page, and causes a full-chip cache/TLB flush. - */ -extern void homecache_change_page_home(struct page *, int order, int home); - -/* - * Flush a page out of whatever cache(s) it is in. - * This is more than just finv, since it properly handles waiting - * for the data to reach memory, but it can be quite - * heavyweight, particularly on incoherent or immutable memory. - */ -extern void homecache_finv_page(struct page *); - -/* - * Flush a page out of the specified home cache. - * Note that the specified home need not be the actual home of the page, - * as for example might be the case when coordinating with I/O devices. - */ -extern void homecache_finv_map_page(struct page *, int home); - -/* - * Allocate a page with the given GFP flags, home, and optionally - * node. These routines are actually just wrappers around the normal - * alloc_pages() / alloc_pages_node() functions, which set and clear - * a per-cpu variable to communicate with homecache_new_kernel_page(). - * If !CONFIG_HOMECACHE, uses homecache_change_page_home(). - */ -extern struct page *homecache_alloc_pages(gfp_t gfp_mask, - unsigned int order, int home); -extern struct page *homecache_alloc_pages_node(int nid, gfp_t gfp_mask, - unsigned int order, int home); -#define homecache_alloc_page(gfp_mask, home) \ - homecache_alloc_pages(gfp_mask, 0, home) - -/* - * These routines are just pass-throughs to free_pages() when - * we support full homecaching. If !CONFIG_HOMECACHE, then these - * routines use homecache_change_page_home() to reset the home - * back to the default before returning the page to the allocator. - */ -void __homecache_free_pages(struct page *, unsigned int order); -void homecache_free_pages(unsigned long addr, unsigned int order); -#define __homecache_free_page(page) __homecache_free_pages((page), 0) -#define homecache_free_page(page) homecache_free_pages((page), 0) - - -/* - * Report the page home for LOWMEM pages by examining their kernel PTE, - * or for highmem pages as the default home. - */ -extern int page_home(struct page *); - -#define homecache_migrate_kthread() do {} while (0) - -#define homecache_kpte_lock() 0 -#define homecache_kpte_unlock(flags) do {} while (0) - - -#endif /* _ASM_TILE_HOMECACHE_H */ diff --git a/arch/tile/include/asm/hugetlb.h b/arch/tile/include/asm/hugetlb.h deleted file mode 100644 index 2fac5be4de26..000000000000 --- a/arch/tile/include/asm/hugetlb.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_HUGETLB_H -#define _ASM_TILE_HUGETLB_H - -#include <asm/page.h> -#include <asm-generic/hugetlb.h> - - -static inline int is_hugepage_only_range(struct mm_struct *mm, - unsigned long addr, - unsigned long len) { - return 0; -} - -/* - * If the arch doesn't supply something else, assume that hugepage - * size aligned regions are ok without further preparation. - */ -static inline int prepare_hugepage_range(struct file *file, - unsigned long addr, unsigned long len) -{ - struct hstate *h = hstate_file(file); - if (len & ~huge_page_mask(h)) - return -EINVAL; - if (addr & ~huge_page_mask(h)) - return -EINVAL; - return 0; -} - -static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb, - unsigned long addr, unsigned long end, - unsigned long floor, - unsigned long ceiling) -{ - free_pgd_range(tlb, addr, end, floor, ceiling); -} - -static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte) -{ - set_pte(ptep, pte); -} - -static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - return ptep_get_and_clear(mm, addr, ptep); -} - -static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep) -{ - ptep_clear_flush(vma, addr, ptep); -} - -static inline int huge_pte_none(pte_t pte) -{ - return pte_none(pte); -} - -static inline pte_t huge_pte_wrprotect(pte_t pte) -{ - return pte_wrprotect(pte); -} - -static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - ptep_set_wrprotect(mm, addr, ptep); -} - -static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep, - pte_t pte, int dirty) -{ - return ptep_set_access_flags(vma, addr, ptep, pte, dirty); -} - -static inline pte_t huge_ptep_get(pte_t *ptep) -{ - return *ptep; -} - -static inline void arch_clear_hugepage_flags(struct page *page) -{ -} - -#ifdef CONFIG_HUGETLB_SUPER_PAGES -static inline pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma, - struct page *page, int writable) -{ - size_t pagesize = huge_page_size(hstate_vma(vma)); - if (pagesize != PUD_SIZE && pagesize != PMD_SIZE) - entry = pte_mksuper(entry); - return entry; -} -#define arch_make_huge_pte arch_make_huge_pte - -/* Sizes to scale up page size for PTEs with HV_PTE_SUPER bit. */ -enum { - HUGE_SHIFT_PGDIR = 0, - HUGE_SHIFT_PMD = 1, - HUGE_SHIFT_PAGE = 2, - HUGE_SHIFT_ENTRIES -}; -extern int huge_shift[HUGE_SHIFT_ENTRIES]; -#endif - -#endif /* _ASM_TILE_HUGETLB_H */ diff --git a/arch/tile/include/asm/hv_driver.h b/arch/tile/include/asm/hv_driver.h deleted file mode 100644 index ad614de899b3..000000000000 --- a/arch/tile/include/asm/hv_driver.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * This header defines a wrapper interface for managing hypervisor - * device calls that will result in an interrupt at some later time. - * In particular, this provides wrappers for hv_preada() and - * hv_pwritea(). - */ - -#ifndef _ASM_TILE_HV_DRIVER_H -#define _ASM_TILE_HV_DRIVER_H - -#include <hv/hypervisor.h> - -struct hv_driver_cb; - -/* A callback to be invoked when an operation completes. */ -typedef void hv_driver_callback_t(struct hv_driver_cb *cb, __hv32 result); - -/* - * A structure to hold information about an outstanding call. - * The driver must allocate a separate structure for each call. - */ -struct hv_driver_cb { - hv_driver_callback_t *callback; /* Function to call on interrupt. */ - void *dev; /* Driver-specific state variable. */ -}; - -/* Wrapper for invoking hv_dev_preada(). */ -static inline int -tile_hv_dev_preada(int devhdl, __hv32 flags, __hv32 sgl_len, - HV_SGL sgl[/* sgl_len */], __hv64 offset, - struct hv_driver_cb *callback) -{ - return hv_dev_preada(devhdl, flags, sgl_len, sgl, - offset, (HV_IntArg)callback); -} - -/* Wrapper for invoking hv_dev_pwritea(). */ -static inline int -tile_hv_dev_pwritea(int devhdl, __hv32 flags, __hv32 sgl_len, - HV_SGL sgl[/* sgl_len */], __hv64 offset, - struct hv_driver_cb *callback) -{ - return hv_dev_pwritea(devhdl, flags, sgl_len, sgl, - offset, (HV_IntArg)callback); -} - - -#endif /* _ASM_TILE_HV_DRIVER_H */ diff --git a/arch/tile/include/asm/ide.h b/arch/tile/include/asm/ide.h deleted file mode 100644 index 3c6f2ed894ce..000000000000 --- a/arch/tile/include/asm/ide.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_IDE_H -#define _ASM_TILE_IDE_H - -/* For IDE on PCI */ -#define MAX_HWIFS 10 - -#define ide_default_io_ctl(base) (0) - -#include <asm-generic/ide_iops.h> - -#endif /* _ASM_TILE_IDE_H */ diff --git a/arch/tile/include/asm/insn.h b/arch/tile/include/asm/insn.h deleted file mode 100644 index f78ba5c16722..000000000000 --- a/arch/tile/include/asm/insn.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright 2015 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ -#ifndef __ASM_TILE_INSN_H -#define __ASM_TILE_INSN_H - -#include <arch/opcode.h> - -static inline tilegx_bundle_bits NOP(void) -{ - return create_UnaryOpcodeExtension_X0(FNOP_UNARY_OPCODE_X0) | - create_RRROpcodeExtension_X0(UNARY_RRR_0_OPCODE_X0) | - create_Opcode_X0(RRR_0_OPCODE_X0) | - create_UnaryOpcodeExtension_X1(NOP_UNARY_OPCODE_X1) | - create_RRROpcodeExtension_X1(UNARY_RRR_0_OPCODE_X1) | - create_Opcode_X1(RRR_0_OPCODE_X1); -} - -static inline tilegx_bundle_bits tilegx_gen_branch(unsigned long pc, - unsigned long addr, - bool link) -{ - tilegx_bundle_bits opcode_x0, opcode_x1; - long pcrel_by_instr = (addr - pc) >> TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES; - - if (link) { - /* opcode: jal addr */ - opcode_x1 = - create_Opcode_X1(JUMP_OPCODE_X1) | - create_JumpOpcodeExtension_X1(JAL_JUMP_OPCODE_X1) | - create_JumpOff_X1(pcrel_by_instr); - } else { - /* opcode: j addr */ - opcode_x1 = - create_Opcode_X1(JUMP_OPCODE_X1) | - create_JumpOpcodeExtension_X1(J_JUMP_OPCODE_X1) | - create_JumpOff_X1(pcrel_by_instr); - } - - /* opcode: fnop */ - opcode_x0 = - create_UnaryOpcodeExtension_X0(FNOP_UNARY_OPCODE_X0) | - create_RRROpcodeExtension_X0(UNARY_RRR_0_OPCODE_X0) | - create_Opcode_X0(RRR_0_OPCODE_X0); - - return opcode_x1 | opcode_x0; -} - -#endif /* __ASM_TILE_INSN_H */ diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h deleted file mode 100644 index 30f4a210d148..000000000000 --- a/arch/tile/include/asm/io.h +++ /dev/null @@ -1,509 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_IO_H -#define _ASM_TILE_IO_H - -#include <linux/kernel.h> -#include <linux/bug.h> -#include <asm/page.h> - -/* Maximum PCI I/O space address supported. */ -#define IO_SPACE_LIMIT 0xffffffff - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access. - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer. - */ -#define xlate_dev_kmem_ptr(p) p - -/* - * Change "struct page" to physical address. - */ -#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT) - -/* - * Some places try to pass in an loff_t for PHYSADDR (?!), so we cast it to - * long before casting it to a pointer to avoid compiler warnings. - */ -#if CHIP_HAS_MMIO() -extern void __iomem *ioremap(resource_size_t offset, unsigned long size); -extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size, - pgprot_t pgprot); -extern void iounmap(volatile void __iomem *addr); -#else -#define ioremap(physaddr, size) ((void __iomem *)(unsigned long)(physaddr)) -#define iounmap(addr) ((void)0) -#endif - -#define ioremap_nocache(physaddr, size) ioremap(physaddr, size) -#define ioremap_wc(physaddr, size) ioremap(physaddr, size) -#define ioremap_wt(physaddr, size) ioremap(physaddr, size) -#define ioremap_uc(physaddr, size) ioremap(physaddr, size) -#define ioremap_fullcache(physaddr, size) ioremap(physaddr, size) - -#define mmiowb() - -/* Conversion between virtual and physical mappings. */ -#define mm_ptov(addr) ((void *)phys_to_virt(addr)) -#define mm_vtop(addr) ((unsigned long)virt_to_phys(addr)) - -#if CHIP_HAS_MMIO() - -/* - * We use inline assembly to guarantee that the compiler does not - * split an access into multiple byte-sized accesses as it might - * sometimes do if a register data structure is marked "packed". - * Obviously on tile we can't tolerate such an access being - * actually unaligned, but we want to avoid the case where the - * compiler conservatively would generate multiple accesses even - * for an aligned read or write. - */ - -static inline u8 __raw_readb(const volatile void __iomem *addr) -{ - return *(const volatile u8 __force *)addr; -} - -static inline u16 __raw_readw(const volatile void __iomem *addr) -{ - u16 ret; - asm volatile("ld2u %0, %1" : "=r" (ret) : "r" (addr)); - barrier(); - return le16_to_cpu(ret); -} - -static inline u32 __raw_readl(const volatile void __iomem *addr) -{ - u32 ret; - /* Sign-extend to conform to u32 ABI sign-extension convention. */ - asm volatile("ld4s %0, %1" : "=r" (ret) : "r" (addr)); - barrier(); - return le32_to_cpu(ret); -} - -static inline u64 __raw_readq(const volatile void __iomem *addr) -{ - u64 ret; - asm volatile("ld %0, %1" : "=r" (ret) : "r" (addr)); - barrier(); - return le64_to_cpu(ret); -} - -static inline void __raw_writeb(u8 val, volatile void __iomem *addr) -{ - *(volatile u8 __force *)addr = val; -} - -static inline void __raw_writew(u16 val, volatile void __iomem *addr) -{ - asm volatile("st2 %0, %1" :: "r" (addr), "r" (cpu_to_le16(val))); -} - -static inline void __raw_writel(u32 val, volatile void __iomem *addr) -{ - asm volatile("st4 %0, %1" :: "r" (addr), "r" (cpu_to_le32(val))); -} - -static inline void __raw_writeq(u64 val, volatile void __iomem *addr) -{ - asm volatile("st %0, %1" :: "r" (addr), "r" (cpu_to_le64(val))); -} - -/* - * The on-chip I/O hardware on tilegx is configured with VA=PA for the - * kernel's PA range. The low-level APIs and field names use "va" and - * "void *" nomenclature, to be consistent with the general notion - * that the addresses in question are virtualizable, but in the kernel - * context we are actually manipulating PA values. (In other contexts, - * e.g. access from user space, we do in fact use real virtual addresses - * in the va fields.) To allow readers of the code to understand what's - * happening, we direct their attention to this comment by using the - * following two functions that just duplicate __va() and __pa(). - */ -typedef unsigned long tile_io_addr_t; -static inline tile_io_addr_t va_to_tile_io_addr(void *va) -{ - BUILD_BUG_ON(sizeof(phys_addr_t) != sizeof(tile_io_addr_t)); - return __pa(va); -} -static inline void *tile_io_addr_to_va(tile_io_addr_t tile_io_addr) -{ - return __va(tile_io_addr); -} - -#else /* CHIP_HAS_MMIO() */ - -#ifdef CONFIG_PCI - -extern u8 _tile_readb(unsigned long addr); -extern u16 _tile_readw(unsigned long addr); -extern u32 _tile_readl(unsigned long addr); -extern u64 _tile_readq(unsigned long addr); -extern void _tile_writeb(u8 val, unsigned long addr); -extern void _tile_writew(u16 val, unsigned long addr); -extern void _tile_writel(u32 val, unsigned long addr); -extern void _tile_writeq(u64 val, unsigned long addr); - -#define __raw_readb(addr) _tile_readb((unsigned long)(addr)) -#define __raw_readw(addr) _tile_readw((unsigned long)(addr)) -#define __raw_readl(addr) _tile_readl((unsigned long)(addr)) -#define __raw_readq(addr) _tile_readq((unsigned long)(addr)) -#define __raw_writeb(val, addr) _tile_writeb(val, (unsigned long)(addr)) -#define __raw_writew(val, addr) _tile_writew(val, (unsigned long)(addr)) -#define __raw_writel(val, addr) _tile_writel(val, (unsigned long)(addr)) -#define __raw_writeq(val, addr) _tile_writeq(val, (unsigned long)(addr)) - -#else /* CONFIG_PCI */ - -/* - * The tilepro architecture does not support IOMEM unless PCI is enabled. - * Unfortunately we can't yet simply not declare these methods, - * since some generic code that compiles into the kernel, but - * we never run, uses them unconditionally. - */ - -static inline int iomem_panic(void) -{ - panic("readb/writeb and friends do not exist on tile without PCI"); - return 0; -} - -static inline u8 readb(unsigned long addr) -{ - return iomem_panic(); -} - -static inline u16 _readw(unsigned long addr) -{ - return iomem_panic(); -} - -static inline u32 readl(unsigned long addr) -{ - return iomem_panic(); -} - -static inline u64 readq(unsigned long addr) -{ - return iomem_panic(); -} - -static inline void writeb(u8 val, unsigned long addr) -{ - iomem_panic(); -} - -static inline void writew(u16 val, unsigned long addr) -{ - iomem_panic(); -} - -static inline void writel(u32 val, unsigned long addr) -{ - iomem_panic(); -} - -static inline void writeq(u64 val, unsigned long addr) -{ - iomem_panic(); -} - -#endif /* CONFIG_PCI */ - -#endif /* CHIP_HAS_MMIO() */ - -#define readb __raw_readb -#define readw __raw_readw -#define readl __raw_readl -#define readq __raw_readq -#define writeb __raw_writeb -#define writew __raw_writew -#define writel __raw_writel -#define writeq __raw_writeq - -#define readb_relaxed readb -#define readw_relaxed readw -#define readl_relaxed readl -#define readq_relaxed readq -#define writeb_relaxed writeb -#define writew_relaxed writew -#define writel_relaxed writel -#define writeq_relaxed writeq - -#define ioread8 readb -#define ioread16 readw -#define ioread32 readl -#define ioread64 readq -#define iowrite8 writeb -#define iowrite16 writew -#define iowrite32 writel -#define iowrite64 writeq - -#if CHIP_HAS_MMIO() || defined(CONFIG_PCI) - -static inline void memset_io(volatile void *dst, int val, size_t len) -{ - size_t x; - BUG_ON((unsigned long)dst & 0x3); - val = (val & 0xff) * 0x01010101; - for (x = 0; x < len; x += 4) - writel(val, dst + x); -} - -static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, - size_t len) -{ - size_t x; - BUG_ON((unsigned long)src & 0x3); - for (x = 0; x < len; x += 4) - *(u32 *)(dst + x) = readl(src + x); -} - -static inline void memcpy_toio(volatile void __iomem *dst, const void *src, - size_t len) -{ - size_t x; - BUG_ON((unsigned long)dst & 0x3); - for (x = 0; x < len; x += 4) - writel(*(u32 *)(src + x), dst + x); -} - -#endif - -#if CHIP_HAS_MMIO() && defined(CONFIG_TILE_PCI_IO) - -static inline u8 inb(unsigned long addr) -{ - return readb((volatile void __iomem *) addr); -} - -static inline u16 inw(unsigned long addr) -{ - return readw((volatile void __iomem *) addr); -} - -static inline u32 inl(unsigned long addr) -{ - return readl((volatile void __iomem *) addr); -} - -static inline void outb(u8 b, unsigned long addr) -{ - writeb(b, (volatile void __iomem *) addr); -} - -static inline void outw(u16 b, unsigned long addr) -{ - writew(b, (volatile void __iomem *) addr); -} - -static inline void outl(u32 b, unsigned long addr) -{ - writel(b, (volatile void __iomem *) addr); -} - -static inline void insb(unsigned long addr, void *buffer, int count) -{ - if (count) { - u8 *buf = buffer; - do { - u8 x = inb(addr); - *buf++ = x; - } while (--count); - } -} - -static inline void insw(unsigned long addr, void *buffer, int count) -{ - if (count) { - u16 *buf = buffer; - do { - u16 x = inw(addr); - *buf++ = x; - } while (--count); - } -} - -static inline void insl(unsigned long addr, void *buffer, int count) -{ - if (count) { - u32 *buf = buffer; - do { - u32 x = inl(addr); - *buf++ = x; - } while (--count); - } -} - -static inline void outsb(unsigned long addr, const void *buffer, int count) -{ - if (count) { - const u8 *buf = buffer; - do { - outb(*buf++, addr); - } while (--count); - } -} - -static inline void outsw(unsigned long addr, const void *buffer, int count) -{ - if (count) { - const u16 *buf = buffer; - do { - outw(*buf++, addr); - } while (--count); - } -} - -static inline void outsl(unsigned long addr, const void *buffer, int count) -{ - if (count) { - const u32 *buf = buffer; - do { - outl(*buf++, addr); - } while (--count); - } -} - -extern void __iomem *ioport_map(unsigned long port, unsigned int len); -extern void ioport_unmap(void __iomem *addr); - -#else - -/* - * The TilePro architecture does not support IOPORT, even with PCI. - * Unfortunately we can't yet simply not declare these methods, - * since some generic code that compiles into the kernel, but - * we never run, uses them unconditionally. - */ - -static inline long ioport_panic(void) -{ -#ifdef __tilegx__ - panic("PCI IO space support is disabled. Configure the kernel with CONFIG_TILE_PCI_IO to enable it"); -#else - panic("inb/outb and friends do not exist on tile"); -#endif - return 0; -} - -static inline void __iomem *ioport_map(unsigned long port, unsigned int len) -{ - pr_info("ioport_map: mapping IO resources is unsupported on tile\n"); - return NULL; -} - -static inline void ioport_unmap(void __iomem *addr) -{ - ioport_panic(); -} - -static inline u8 inb(unsigned long addr) -{ - return ioport_panic(); -} - -static inline u16 inw(unsigned long addr) -{ - return ioport_panic(); -} - -static inline u32 inl(unsigned long addr) -{ - return ioport_panic(); -} - -static inline void outb(u8 b, unsigned long addr) -{ - ioport_panic(); -} - -static inline void outw(u16 b, unsigned long addr) -{ - ioport_panic(); -} - -static inline void outl(u32 b, unsigned long addr) -{ - ioport_panic(); -} - -static inline void insb(unsigned long addr, void *buffer, int count) -{ - ioport_panic(); -} - -static inline void insw(unsigned long addr, void *buffer, int count) -{ - ioport_panic(); -} - -static inline void insl(unsigned long addr, void *buffer, int count) -{ - ioport_panic(); -} - -static inline void outsb(unsigned long addr, const void *buffer, int count) -{ - ioport_panic(); -} - -static inline void outsw(unsigned long addr, const void *buffer, int count) -{ - ioport_panic(); -} - -static inline void outsl(unsigned long addr, const void *buffer, int count) -{ - ioport_panic(); -} - -#endif /* CHIP_HAS_MMIO() && defined(CONFIG_TILE_PCI_IO) */ - -#define inb_p(addr) inb(addr) -#define inw_p(addr) inw(addr) -#define inl_p(addr) inl(addr) -#define outb_p(x, addr) outb((x), (addr)) -#define outw_p(x, addr) outw((x), (addr)) -#define outl_p(x, addr) outl((x), (addr)) - -#define ioread16be(addr) be16_to_cpu(ioread16(addr)) -#define ioread32be(addr) be32_to_cpu(ioread32(addr)) -#define iowrite16be(v, addr) iowrite16(be16_to_cpu(v), (addr)) -#define iowrite32be(v, addr) iowrite32(be32_to_cpu(v), (addr)) - -#define ioread8_rep(p, dst, count) \ - insb((unsigned long) (p), (dst), (count)) -#define ioread16_rep(p, dst, count) \ - insw((unsigned long) (p), (dst), (count)) -#define ioread32_rep(p, dst, count) \ - insl((unsigned long) (p), (dst), (count)) - -#define iowrite8_rep(p, src, count) \ - outsb((unsigned long) (p), (src), (count)) -#define iowrite16_rep(p, src, count) \ - outsw((unsigned long) (p), (src), (count)) -#define iowrite32_rep(p, src, count) \ - outsl((unsigned long) (p), (src), (count)) - -#define virt_to_bus virt_to_phys -#define bus_to_virt phys_to_virt - -#endif /* _ASM_TILE_IO_H */ diff --git a/arch/tile/include/asm/irq.h b/arch/tile/include/asm/irq.h deleted file mode 100644 index 1fa1f2544ff9..000000000000 --- a/arch/tile/include/asm/irq.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_IRQ_H -#define _ASM_TILE_IRQ_H - -#include <linux/hardirq.h> - -/* The hypervisor interface provides 32 IRQs. */ -#define NR_IRQS 32 - -/* IRQ numbers used for linux IPIs. */ -#define IRQ_RESCHEDULE 0 -/* Interrupts for dynamic allocation start at 1. Let the core allocate irq0 */ -#define NR_IRQS_LEGACY 1 - -#define irq_canonicalize(irq) (irq) - -void ack_bad_irq(unsigned int irq); - -/* - * Different ways of handling interrupts. Tile interrupts are always - * per-cpu; there is no global interrupt controller to implement - * enable/disable. Most onboard devices can send their interrupts to - * many tiles at the same time, and Tile-specific drivers know how to - * deal with this. - * - * However, generic devices (usually PCIE based, sometimes GPIO) - * expect that interrupts will fire on a single core at a time and - * that the irq can be enabled or disabled from any core at any time. - * We implement this by directing such interrupts to a single core. - * - * One added wrinkle is that PCI interrupts can be either - * hardware-cleared (legacy interrupts) or software cleared (MSI). - * Other generic device systems (GPIO) are always software-cleared. - * - * The enums below are used by drivers for onboard devices, including - * the internals of PCI root complex and GPIO. They allow the driver - * to tell the generic irq code what kind of interrupt is mapped to a - * particular IRQ number. - */ -enum { - /* per-cpu interrupt; use enable/disable_percpu_irq() to mask */ - TILE_IRQ_PERCPU, - /* global interrupt, hardware responsible for clearing. */ - TILE_IRQ_HW_CLEAR, - /* global interrupt, software responsible for clearing. */ - TILE_IRQ_SW_CLEAR, -}; - - -/* - * Paravirtualized drivers should call this when they dynamically - * allocate a new IRQ or discover an IRQ that was pre-allocated by the - * hypervisor for use with their particular device. This gives the - * IRQ subsystem an opportunity to do interrupt-type-specific - * initialization. - * - * ISSUE: We should modify this API so that registering anything - * except percpu interrupts also requires providing callback methods - * for enabling and disabling the interrupt. This would allow the - * generic IRQ code to proxy enable/disable_irq() calls back into the - * PCI subsystem, which in turn could enable or disable the interrupt - * at the PCI shim. - */ -void tile_irq_activate(unsigned int irq, int tile_irq_type); - -void setup_irq_regs(void); - -#ifdef __tilegx__ -void arch_trigger_cpumask_backtrace(const struct cpumask *mask, - bool exclude_self); -#define arch_trigger_cpumask_backtrace arch_trigger_cpumask_backtrace -#endif - -#endif /* _ASM_TILE_IRQ_H */ diff --git a/arch/tile/include/asm/irq_work.h b/arch/tile/include/asm/irq_work.h deleted file mode 100644 index 78d3b6a7b27a..000000000000 --- a/arch/tile/include/asm/irq_work.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_IRQ_WORK_H -#define __ASM_IRQ_WORK_H - -static inline bool arch_irq_work_has_interrupt(void) -{ -#ifdef CONFIG_SMP - extern bool self_interrupt_ok; - return self_interrupt_ok; -#else - return false; -#endif -} - -#endif /* __ASM_IRQ_WORK_H */ diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h deleted file mode 100644 index 60d62a292fce..000000000000 --- a/arch/tile/include/asm/irqflags.h +++ /dev/null @@ -1,311 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_IRQFLAGS_H -#define _ASM_TILE_IRQFLAGS_H - -#include <arch/interrupts.h> -#include <arch/chip.h> - -/* - * The set of interrupts we want to allow when interrupts are nominally - * disabled. The remainder are effectively "NMI" interrupts from - * the point of view of the generic Linux code. Note that synchronous - * interrupts (aka "non-queued") are not blocked by the mask in any case. - */ -#define LINUX_MASKABLE_INTERRUPTS \ - (~((_AC(1,ULL) << INT_PERF_COUNT) | (_AC(1,ULL) << INT_AUX_PERF_COUNT))) - -#if CHIP_HAS_SPLIT_INTR_MASK() -/* The same macro, but for the two 32-bit SPRs separately. */ -#define LINUX_MASKABLE_INTERRUPTS_LO (-1) -#define LINUX_MASKABLE_INTERRUPTS_HI \ - (~((1 << (INT_PERF_COUNT - 32)) | (1 << (INT_AUX_PERF_COUNT - 32)))) -#endif - -#ifndef __ASSEMBLY__ - -/* NOTE: we can't include <linux/percpu.h> due to #include dependencies. */ -#include <asm/percpu.h> -#include <arch/spr_def.h> - -/* - * Set and clear kernel interrupt masks. - * - * NOTE: __insn_mtspr() is a compiler builtin marked as a memory - * clobber. We rely on it being equivalent to a compiler barrier in - * this code since arch_local_irq_save() and friends must act as - * compiler barriers. This compiler semantic is baked into enough - * places that the compiler will maintain it going forward. - */ -#if CHIP_HAS_SPLIT_INTR_MASK() -#if INT_PERF_COUNT < 32 || INT_AUX_PERF_COUNT < 32 || INT_MEM_ERROR >= 32 -# error Fix assumptions about which word various interrupts are in -#endif -#define interrupt_mask_set(n) do { \ - int __n = (n); \ - int __mask = 1 << (__n & 0x1f); \ - if (__n < 32) \ - __insn_mtspr(SPR_INTERRUPT_MASK_SET_K_0, __mask); \ - else \ - __insn_mtspr(SPR_INTERRUPT_MASK_SET_K_1, __mask); \ -} while (0) -#define interrupt_mask_reset(n) do { \ - int __n = (n); \ - int __mask = 1 << (__n & 0x1f); \ - if (__n < 32) \ - __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_0, __mask); \ - else \ - __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_1, __mask); \ -} while (0) -#define interrupt_mask_check(n) ({ \ - int __n = (n); \ - (((__n < 32) ? \ - __insn_mfspr(SPR_INTERRUPT_MASK_K_0) : \ - __insn_mfspr(SPR_INTERRUPT_MASK_K_1)) \ - >> (__n & 0x1f)) & 1; \ -}) -#define interrupt_mask_set_mask(mask) do { \ - unsigned long long __m = (mask); \ - __insn_mtspr(SPR_INTERRUPT_MASK_SET_K_0, (unsigned long)(__m)); \ - __insn_mtspr(SPR_INTERRUPT_MASK_SET_K_1, (unsigned long)(__m>>32)); \ -} while (0) -#define interrupt_mask_reset_mask(mask) do { \ - unsigned long long __m = (mask); \ - __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_0, (unsigned long)(__m)); \ - __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_1, (unsigned long)(__m>>32)); \ -} while (0) -#define interrupt_mask_save_mask() \ - (__insn_mfspr(SPR_INTERRUPT_MASK_SET_K_0) | \ - (((unsigned long long)__insn_mfspr(SPR_INTERRUPT_MASK_SET_K_1))<<32)) -#define interrupt_mask_restore_mask(mask) do { \ - unsigned long long __m = (mask); \ - __insn_mtspr(SPR_INTERRUPT_MASK_K_0, (unsigned long)(__m)); \ - __insn_mtspr(SPR_INTERRUPT_MASK_K_1, (unsigned long)(__m>>32)); \ -} while (0) -#else -#define interrupt_mask_set(n) \ - __insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (1UL << (n))) -#define interrupt_mask_reset(n) \ - __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K, (1UL << (n))) -#define interrupt_mask_check(n) \ - ((__insn_mfspr(SPR_INTERRUPT_MASK_K) >> (n)) & 1) -#define interrupt_mask_set_mask(mask) \ - __insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (mask)) -#define interrupt_mask_reset_mask(mask) \ - __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K, (mask)) -#define interrupt_mask_save_mask() \ - __insn_mfspr(SPR_INTERRUPT_MASK_K) -#define interrupt_mask_restore_mask(mask) \ - __insn_mtspr(SPR_INTERRUPT_MASK_K, (mask)) -#endif - -/* - * The set of interrupts we want active if irqs are enabled. - * Note that in particular, the tile timer interrupt comes and goes - * from this set, since we have no other way to turn off the timer. - * Likewise, INTCTRL_K is removed and re-added during device - * interrupts, as is the the hardwall UDN_FIREWALL interrupt. - * We use a low bit (MEM_ERROR) as our sentinel value and make sure it - * is always claimed as an "active interrupt" so we can query that bit - * to know our current state. - */ -DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask); -#define INITIAL_INTERRUPTS_ENABLED (1ULL << INT_MEM_ERROR) - -#ifdef CONFIG_DEBUG_PREEMPT -/* Due to inclusion issues, we can't rely on <linux/smp.h> here. */ -extern unsigned int debug_smp_processor_id(void); -# define smp_processor_id() debug_smp_processor_id() -#endif - -/* Disable interrupts. */ -#define arch_local_irq_disable() \ - interrupt_mask_set_mask(LINUX_MASKABLE_INTERRUPTS) - -/* Disable all interrupts, including NMIs. */ -#define arch_local_irq_disable_all() \ - interrupt_mask_set_mask(-1ULL) - -/* - * Read the set of maskable interrupts. - * We avoid the preemption warning here via raw_cpu_ptr since even - * if irqs are already enabled, it's harmless to read the wrong cpu's - * enabled mask. - */ -#define arch_local_irqs_enabled() \ - (*raw_cpu_ptr(&interrupts_enabled_mask)) - -/* Re-enable all maskable interrupts. */ -#define arch_local_irq_enable() \ - interrupt_mask_reset_mask(arch_local_irqs_enabled()) - -/* Disable or enable interrupts based on flag argument. */ -#define arch_local_irq_restore(disabled) do { \ - if (disabled) \ - arch_local_irq_disable(); \ - else \ - arch_local_irq_enable(); \ -} while (0) - -/* Return true if "flags" argument means interrupts are disabled. */ -#define arch_irqs_disabled_flags(flags) ((flags) != 0) - -/* Return true if interrupts are currently disabled. */ -#define arch_irqs_disabled() interrupt_mask_check(INT_MEM_ERROR) - -/* Save whether interrupts are currently disabled. */ -#define arch_local_save_flags() arch_irqs_disabled() - -/* Save whether interrupts are currently disabled, then disable them. */ -#define arch_local_irq_save() ({ \ - unsigned long __flags = arch_local_save_flags(); \ - arch_local_irq_disable(); \ - __flags; }) - -/* Prevent the given interrupt from being enabled next time we enable irqs. */ -#define arch_local_irq_mask(interrupt) \ - this_cpu_and(interrupts_enabled_mask, ~(1ULL << (interrupt))) - -/* Prevent the given interrupt from being enabled immediately. */ -#define arch_local_irq_mask_now(interrupt) do { \ - arch_local_irq_mask(interrupt); \ - interrupt_mask_set(interrupt); \ -} while (0) - -/* Allow the given interrupt to be enabled next time we enable irqs. */ -#define arch_local_irq_unmask(interrupt) \ - this_cpu_or(interrupts_enabled_mask, (1ULL << (interrupt))) - -/* Allow the given interrupt to be enabled immediately, if !irqs_disabled. */ -#define arch_local_irq_unmask_now(interrupt) do { \ - arch_local_irq_unmask(interrupt); \ - if (!irqs_disabled()) \ - interrupt_mask_reset(interrupt); \ -} while (0) - -#else /* __ASSEMBLY__ */ - -/* We provide a somewhat more restricted set for assembly. */ - -#ifdef __tilegx__ - -#if INT_MEM_ERROR != 0 -# error Fix IRQS_DISABLED() macro -#endif - -/* Return 0 or 1 to indicate whether interrupts are currently disabled. */ -#define IRQS_DISABLED(tmp) \ - mfspr tmp, SPR_INTERRUPT_MASK_K; \ - andi tmp, tmp, 1 - -/* Load up a pointer to &interrupts_enabled_mask. */ -#define GET_INTERRUPTS_ENABLED_MASK_PTR(reg) \ - moveli reg, hw2_last(interrupts_enabled_mask); \ - shl16insli reg, reg, hw1(interrupts_enabled_mask); \ - shl16insli reg, reg, hw0(interrupts_enabled_mask); \ - add reg, reg, tp - -/* Disable interrupts. */ -#define IRQ_DISABLE(tmp0, tmp1) \ - moveli tmp0, hw2_last(LINUX_MASKABLE_INTERRUPTS); \ - shl16insli tmp0, tmp0, hw1(LINUX_MASKABLE_INTERRUPTS); \ - shl16insli tmp0, tmp0, hw0(LINUX_MASKABLE_INTERRUPTS); \ - mtspr SPR_INTERRUPT_MASK_SET_K, tmp0 - -/* Disable ALL synchronous interrupts (used by NMI entry). */ -#define IRQ_DISABLE_ALL(tmp) \ - movei tmp, -1; \ - mtspr SPR_INTERRUPT_MASK_SET_K, tmp - -/* Enable interrupts. */ -#define IRQ_ENABLE_LOAD(tmp0, tmp1) \ - GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \ - ld tmp0, tmp0 -#define IRQ_ENABLE_APPLY(tmp0, tmp1) \ - mtspr SPR_INTERRUPT_MASK_RESET_K, tmp0 - -#else /* !__tilegx__ */ - -/* - * Return 0 or 1 to indicate whether interrupts are currently disabled. - * Note that it's important that we use a bit from the "low" mask word, - * since when we are enabling, that is the word we write first, so if we - * are interrupted after only writing half of the mask, the interrupt - * handler will correctly observe that we have interrupts enabled, and - * will enable interrupts itself on return from the interrupt handler - * (making the original code's write of the "high" mask word idempotent). - */ -#define IRQS_DISABLED(tmp) \ - mfspr tmp, SPR_INTERRUPT_MASK_K_0; \ - shri tmp, tmp, INT_MEM_ERROR; \ - andi tmp, tmp, 1 - -/* Load up a pointer to &interrupts_enabled_mask. */ -#define GET_INTERRUPTS_ENABLED_MASK_PTR(reg) \ - moveli reg, lo16(interrupts_enabled_mask); \ - auli reg, reg, ha16(interrupts_enabled_mask); \ - add reg, reg, tp - -/* Disable interrupts. */ -#define IRQ_DISABLE(tmp0, tmp1) \ - { \ - movei tmp0, LINUX_MASKABLE_INTERRUPTS_LO; \ - moveli tmp1, lo16(LINUX_MASKABLE_INTERRUPTS_HI) \ - }; \ - { \ - mtspr SPR_INTERRUPT_MASK_SET_K_0, tmp0; \ - auli tmp1, tmp1, ha16(LINUX_MASKABLE_INTERRUPTS_HI) \ - }; \ - mtspr SPR_INTERRUPT_MASK_SET_K_1, tmp1 - -/* Disable ALL synchronous interrupts (used by NMI entry). */ -#define IRQ_DISABLE_ALL(tmp) \ - movei tmp, -1; \ - mtspr SPR_INTERRUPT_MASK_SET_K_0, tmp; \ - mtspr SPR_INTERRUPT_MASK_SET_K_1, tmp - -/* Enable interrupts. */ -#define IRQ_ENABLE_LOAD(tmp0, tmp1) \ - GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \ - { \ - lw tmp0, tmp0; \ - addi tmp1, tmp0, 4 \ - }; \ - lw tmp1, tmp1 -#define IRQ_ENABLE_APPLY(tmp0, tmp1) \ - mtspr SPR_INTERRUPT_MASK_RESET_K_0, tmp0; \ - mtspr SPR_INTERRUPT_MASK_RESET_K_1, tmp1 -#endif - -#define IRQ_ENABLE(tmp0, tmp1) \ - IRQ_ENABLE_LOAD(tmp0, tmp1); \ - IRQ_ENABLE_APPLY(tmp0, tmp1) - -/* - * Do the CPU's IRQ-state tracing from assembly code. We call a - * C function, but almost everywhere we do, we don't mind clobbering - * all the caller-saved registers. - */ -#ifdef CONFIG_TRACE_IRQFLAGS -# define TRACE_IRQS_ON jal trace_hardirqs_on -# define TRACE_IRQS_OFF jal trace_hardirqs_off -#else -# define TRACE_IRQS_ON -# define TRACE_IRQS_OFF -#endif - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_TILE_IRQFLAGS_H */ diff --git a/arch/tile/include/asm/jump_label.h b/arch/tile/include/asm/jump_label.h deleted file mode 100644 index cde7573f397b..000000000000 --- a/arch/tile/include/asm/jump_label.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright 2015 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_JUMP_LABEL_H -#define _ASM_TILE_JUMP_LABEL_H - -#include <arch/opcode.h> - -#define JUMP_LABEL_NOP_SIZE TILE_BUNDLE_SIZE_IN_BYTES - -static __always_inline bool arch_static_branch(struct static_key *key, - bool branch) -{ - asm_volatile_goto("1:\n\t" - "nop" "\n\t" - ".pushsection __jump_table, \"aw\"\n\t" - ".quad 1b, %l[l_yes], %0 + %1 \n\t" - ".popsection\n\t" - : : "i" (key), "i" (branch) : : l_yes); - return false; -l_yes: - return true; -} - -static __always_inline bool arch_static_branch_jump(struct static_key *key, - bool branch) -{ - asm_volatile_goto("1:\n\t" - "j %l[l_yes]" "\n\t" - ".pushsection __jump_table, \"aw\"\n\t" - ".quad 1b, %l[l_yes], %0 + %1 \n\t" - ".popsection\n\t" - : : "i" (key), "i" (branch) : : l_yes); - return false; -l_yes: - return true; -} - -typedef u64 jump_label_t; - -struct jump_entry { - jump_label_t code; - jump_label_t target; - jump_label_t key; -}; - -#endif /* _ASM_TILE_JUMP_LABEL_H */ diff --git a/arch/tile/include/asm/kdebug.h b/arch/tile/include/asm/kdebug.h deleted file mode 100644 index 5bbbfa904c2d..000000000000 --- a/arch/tile/include/asm/kdebug.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_KDEBUG_H -#define _ASM_TILE_KDEBUG_H - -#include <linux/notifier.h> - -enum die_val { - DIE_OOPS = 1, - DIE_BREAK, - DIE_SSTEPBP, - DIE_PAGE_FAULT, - DIE_COMPILED_BPT -}; - -#endif /* _ASM_TILE_KDEBUG_H */ diff --git a/arch/tile/include/asm/kexec.h b/arch/tile/include/asm/kexec.h deleted file mode 100644 index fc98ccfc98ac..000000000000 --- a/arch/tile/include/asm/kexec.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * based on kexec.h from other architectures in linux-2.6.18 - */ - -#ifndef _ASM_TILE_KEXEC_H -#define _ASM_TILE_KEXEC_H - -#include <asm/page.h> - -#ifndef __tilegx__ -/* Maximum physical address we can use pages from. */ -#define KEXEC_SOURCE_MEMORY_LIMIT TASK_SIZE -/* Maximum address we can reach in physical address mode. */ -#define KEXEC_DESTINATION_MEMORY_LIMIT TASK_SIZE -/* Maximum address we can use for the control code buffer. */ -#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE -#else -/* We need to limit the memory below PGDIR_SIZE since - * we only setup page table for [0, PGDIR_SIZE) before final kexec. - */ -/* Maximum physical address we can use pages from. */ -#define KEXEC_SOURCE_MEMORY_LIMIT PGDIR_SIZE -/* Maximum address we can reach in physical address mode. */ -#define KEXEC_DESTINATION_MEMORY_LIMIT PGDIR_SIZE -/* Maximum address we can use for the control code buffer. */ -#define KEXEC_CONTROL_MEMORY_LIMIT PGDIR_SIZE -#endif - -#define KEXEC_CONTROL_PAGE_SIZE PAGE_SIZE - -/* - * We don't bother to provide a unique identifier, since we can only - * reboot with a single type of kernel image anyway. - */ -#define KEXEC_ARCH KEXEC_ARCH_DEFAULT - -/* Use the tile override for the page allocator. */ -struct page *kimage_alloc_pages_arch(gfp_t gfp_mask, unsigned int order); -#define kimage_alloc_pages_arch kimage_alloc_pages_arch - -#define MAX_NOTE_BYTES 1024 - -/* Defined in arch/tile/kernel/relocate_kernel.S */ -extern const unsigned char relocate_new_kernel[]; -extern const unsigned long relocate_new_kernel_size; -extern void relocate_new_kernel_end(void); - -/* Provide a dummy definition to avoid build failures. */ -static inline void crash_setup_regs(struct pt_regs *n, struct pt_regs *o) -{ -} - -#endif /* _ASM_TILE_KEXEC_H */ diff --git a/arch/tile/include/asm/kgdb.h b/arch/tile/include/asm/kgdb.h deleted file mode 100644 index 280c181cf0db..000000000000 --- a/arch/tile/include/asm/kgdb.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Copyright 2013 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * TILE-Gx KGDB support. - */ - -#ifndef __TILE_KGDB_H__ -#define __TILE_KGDB_H__ - -#include <linux/kdebug.h> -#include <arch/opcode.h> - -#define GDB_SIZEOF_REG sizeof(unsigned long) - -/* - * TILE-Gx gdb is expecting the following register layout: - * 56 GPRs(R0 - R52, TP, SP, LR), 8 special GPRs(networks and ZERO), - * plus the PC and the faultnum. - * - * Even though kernel not use the 8 special GPRs, they need to be present - * in the registers sent for correct processing in the host-side gdb. - * - */ -#define DBG_MAX_REG_NUM (56+8+2) -#define NUMREGBYTES (DBG_MAX_REG_NUM * GDB_SIZEOF_REG) - -/* - * BUFMAX defines the maximum number of characters in inbound/outbound - * buffers at least NUMREGBYTES*2 are needed for register packets, - * Longer buffer is needed to list all threads. - */ -#define BUFMAX 2048 - -#define BREAK_INSTR_SIZE TILEGX_BUNDLE_SIZE_IN_BYTES - -/* - * Require cache flush for set/clear a software breakpoint or write memory. - */ -#define CACHE_FLUSH_IS_SAFE 1 - -/* - * The compiled-in breakpoint instruction can be used to "break" into - * the debugger via magic system request key (sysrq-G). - */ -static tile_bundle_bits compiled_bpt = TILEGX_BPT_BUNDLE | DIE_COMPILED_BPT; - -enum tilegx_regnum { - TILEGX_PC_REGNUM = TREG_LAST_GPR + 9, - TILEGX_FAULTNUM_REGNUM, -}; - -/* - * Generate a breakpoint exception to "break" into the debugger. - */ -static inline void arch_kgdb_breakpoint(void) -{ - asm volatile (".quad %0\n\t" - ::""(compiled_bpt)); -} - -#endif /* __TILE_KGDB_H__ */ diff --git a/arch/tile/include/asm/kmap_types.h b/arch/tile/include/asm/kmap_types.h deleted file mode 100644 index 92b28e3e9972..000000000000 --- a/arch/tile/include/asm/kmap_types.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_KMAP_TYPES_H -#define _ASM_TILE_KMAP_TYPES_H - -/* - * In 32-bit TILE Linux we have to balance the desire to have a lot of - * nested atomic mappings with the fact that large page sizes and many - * processors chew up address space quickly. In a typical - * 64-processor, 64KB-page layout build, making KM_TYPE_NR one larger - * adds 4MB of required address-space. For now we leave KM_TYPE_NR - * set to depth 8. - */ -#define KM_TYPE_NR 8 - -#endif /* _ASM_TILE_KMAP_TYPES_H */ diff --git a/arch/tile/include/asm/kprobes.h b/arch/tile/include/asm/kprobes.h deleted file mode 100644 index 4a8b1cadca24..000000000000 --- a/arch/tile/include/asm/kprobes.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * arch/tile/include/asm/kprobes.h - * - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_KPROBES_H -#define _ASM_TILE_KPROBES_H - -#include <asm-generic/kprobes.h> - -#ifdef CONFIG_KPROBES - -#include <linux/types.h> -#include <linux/ptrace.h> -#include <linux/percpu.h> -#include <arch/opcode.h> - -#define __ARCH_WANT_KPROBES_INSN_SLOT -#define MAX_INSN_SIZE 2 - -#define kretprobe_blacklist_size 0 - -typedef tile_bundle_bits kprobe_opcode_t; - -#define flush_insn_slot(p) \ - flush_icache_range((unsigned long)p->addr, \ - (unsigned long)p->addr + \ - (MAX_INSN_SIZE * sizeof(kprobe_opcode_t))) - -struct kprobe; - -/* Architecture specific copy of original instruction. */ -struct arch_specific_insn { - kprobe_opcode_t *insn; -}; - -struct prev_kprobe { - struct kprobe *kp; - unsigned long status; - unsigned long saved_pc; -}; - -#define MAX_JPROBES_STACK_SIZE 128 -#define MAX_JPROBES_STACK_ADDR \ - (((unsigned long)current_thread_info()) + THREAD_SIZE - 32 \ - - sizeof(struct pt_regs)) - -#define MIN_JPROBES_STACK_SIZE(ADDR) \ - ((((ADDR) + MAX_JPROBES_STACK_SIZE) > MAX_JPROBES_STACK_ADDR) \ - ? MAX_JPROBES_STACK_ADDR - (ADDR) \ - : MAX_JPROBES_STACK_SIZE) - -/* per-cpu kprobe control block. */ -struct kprobe_ctlblk { - unsigned long kprobe_status; - unsigned long kprobe_saved_pc; - unsigned long jprobe_saved_sp; - struct prev_kprobe prev_kprobe; - struct pt_regs jprobe_saved_regs; - char jprobes_stack[MAX_JPROBES_STACK_SIZE]; -}; - -extern tile_bundle_bits breakpoint2_insn; -extern tile_bundle_bits breakpoint_insn; - -void arch_remove_kprobe(struct kprobe *); - -extern int kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data); - -#endif /* CONFIG_KPROBES */ -#endif /* _ASM_TILE_KPROBES_H */ diff --git a/arch/tile/include/asm/linkage.h b/arch/tile/include/asm/linkage.h deleted file mode 100644 index e121c39751a7..000000000000 --- a/arch/tile/include/asm/linkage.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_LINKAGE_H -#define _ASM_TILE_LINKAGE_H - -#include <feedback.h> - -#define __ALIGN .align 8 - -/* - * The STD_ENTRY and STD_ENDPROC macros put the function in a - * self-named .text.foo section, and if linker feedback collection - * is enabled, add a suitable call to the feedback collection code. - * STD_ENTRY_SECTION lets you specify a non-standard section name. - */ - -#define STD_ENTRY(name) \ - .pushsection .text.##name, "ax"; \ - ENTRY(name); \ - FEEDBACK_ENTER(name) - -#define STD_ENTRY_SECTION(name, section) \ - .pushsection section, "ax"; \ - ENTRY(name); \ - FEEDBACK_ENTER_EXPLICIT(name, section, .Lend_##name - name) - -#define STD_ENDPROC(name) \ - ENDPROC(name); \ - .Lend_##name:; \ - .popsection - -/* Create a file-static function entry set up for feedback gathering. */ -#define STD_ENTRY_LOCAL(name) \ - .pushsection .text.##name, "ax"; \ - ALIGN; \ - name:; \ - FEEDBACK_ENTER(name) - -#endif /* _ASM_TILE_LINKAGE_H */ diff --git a/arch/tile/include/asm/mmu.h b/arch/tile/include/asm/mmu.h deleted file mode 100644 index 0cab1182bde1..000000000000 --- a/arch/tile/include/asm/mmu.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_MMU_H -#define _ASM_TILE_MMU_H - -/* Capture any arch- and mm-specific information. */ -struct mm_context { - /* - * Written under the mmap_sem semaphore; read without the - * semaphore but atomically, but it is conservatively set. - */ - unsigned long priority_cached; - unsigned long vdso_base; -}; - -typedef struct mm_context mm_context_t; - -void leave_mm(int cpu); - -#endif /* _ASM_TILE_MMU_H */ diff --git a/arch/tile/include/asm/mmu_context.h b/arch/tile/include/asm/mmu_context.h deleted file mode 100644 index 45a4b4c424cf..000000000000 --- a/arch/tile/include/asm/mmu_context.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_MMU_CONTEXT_H -#define _ASM_TILE_MMU_CONTEXT_H - -#include <linux/smp.h> -#include <linux/mm_types.h> - -#include <asm/setup.h> -#include <asm/page.h> -#include <asm/pgalloc.h> -#include <asm/pgtable.h> -#include <asm/tlbflush.h> -#include <asm/homecache.h> -#include <asm-generic/mm_hooks.h> - -static inline int -init_new_context(struct task_struct *tsk, struct mm_struct *mm) -{ - return 0; -} - -/* - * Note that arch/tile/kernel/head_NN.S and arch/tile/mm/migrate_NN.S - * also call hv_install_context(). - */ -static inline void __install_page_table(pgd_t *pgdir, int asid, pgprot_t prot) -{ - /* FIXME: DIRECTIO should not always be set. FIXME. */ - int rc = hv_install_context(__pa(pgdir), prot, asid, - HV_CTX_DIRECTIO | CTX_PAGE_FLAG); - if (rc < 0) - panic("hv_install_context failed: %d", rc); -} - -static inline void install_page_table(pgd_t *pgdir, int asid) -{ - pte_t *ptep = virt_to_kpte((unsigned long)pgdir); - __install_page_table(pgdir, asid, *ptep); -} - -/* - * "Lazy" TLB mode is entered when we are switching to a kernel task, - * which borrows the mm of the previous task. The goal of this - * optimization is to avoid having to install a new page table. On - * early x86 machines (where the concept originated) you couldn't do - * anything short of a full page table install for invalidation, so - * handling a remote TLB invalidate required doing a page table - * re-install. Someone clearly decided that it was silly to keep - * doing this while in "lazy" TLB mode, so the optimization involves - * installing the swapper page table instead the first time one - * occurs, and clearing the cpu out of cpu_vm_mask, so the cpu running - * the kernel task doesn't need to take any more interrupts. At that - * point it's then necessary to explicitly reinstall it when context - * switching back to the original mm. - * - * On Tile, we have to do a page-table install whenever DMA is enabled, - * so in that case lazy mode doesn't help anyway. And more generally, - * we have efficient per-page TLB shootdown, and don't expect to spend - * that much time in kernel tasks in general, so just leaving the - * kernel task borrowing the old page table, but handling TLB - * shootdowns, is a reasonable thing to do. And importantly, this - * lets us use the hypervisor's internal APIs for TLB shootdown, which - * means we don't have to worry about having TLB shootdowns blocked - * when Linux is disabling interrupts; see the page migration code for - * an example of where it's important for TLB shootdowns to complete - * even when interrupts are disabled at the Linux level. - */ -static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *t) -{ -#if CHIP_HAS_TILE_DMA() - /* - * We have to do an "identity" page table switch in order to - * clear any pending DMA interrupts. - */ - if (current->thread.tile_dma_state.enabled) - install_page_table(mm->pgd, __this_cpu_read(current_asid)); -#endif -} - -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) -{ - if (likely(prev != next)) { - - int cpu = smp_processor_id(); - - /* Pick new ASID. */ - int asid = __this_cpu_read(current_asid) + 1; - if (asid > max_asid) { - asid = min_asid; - local_flush_tlb(); - } - __this_cpu_write(current_asid, asid); - - /* Clear cpu from the old mm, and set it in the new one. */ - cpumask_clear_cpu(cpu, mm_cpumask(prev)); - cpumask_set_cpu(cpu, mm_cpumask(next)); - - /* Re-load page tables */ - install_page_table(next->pgd, asid); - - /* See how we should set the red/black cache info */ - check_mm_caching(prev, next); - - /* - * Since we're changing to a new mm, we have to flush - * the icache in case some physical page now being mapped - * has subsequently been repurposed and has new code. - */ - __flush_icache(); - - } -} - -static inline void activate_mm(struct mm_struct *prev_mm, - struct mm_struct *next_mm) -{ - switch_mm(prev_mm, next_mm, NULL); -} - -#define destroy_context(mm) do { } while (0) -#define deactivate_mm(tsk, mm) do { } while (0) - -#endif /* _ASM_TILE_MMU_CONTEXT_H */ diff --git a/arch/tile/include/asm/mmzone.h b/arch/tile/include/asm/mmzone.h deleted file mode 100644 index 804f1098b6cd..000000000000 --- a/arch/tile/include/asm/mmzone.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_MMZONE_H -#define _ASM_TILE_MMZONE_H - -extern struct pglist_data node_data[]; -#define NODE_DATA(nid) (&node_data[nid]) - -extern void get_memcfg_numa(void); - -#ifdef CONFIG_DISCONTIGMEM - -#include <asm/page.h> - -/* - * Generally, memory ranges are always doled out by the hypervisor in - * fixed-size, power-of-two increments. That would make computing the node - * very easy. We could just take a couple high bits of the PA, which - * denote the memory shim, and we'd be done. However, when we're doing - * memory striping, this may not be true; PAs with different high bit - * values might be in the same node. Thus, we keep a lookup table to - * translate the high bits of the PFN to the node number. - */ -extern int highbits_to_node[]; - -static inline int pfn_to_nid(unsigned long pfn) -{ - return highbits_to_node[__pfn_to_highbits(pfn)]; -} - -#define kern_addr_valid(kaddr) virt_addr_valid((void *)kaddr) - -static inline int pfn_valid(unsigned long pfn) -{ - int nid = pfn_to_nid(pfn); - - if (nid >= 0) - return (pfn < node_end_pfn(nid)); - return 0; -} - -/* Information on the NUMA nodes that we compute early */ -extern unsigned long node_start_pfn[]; -extern unsigned long node_end_pfn[]; -extern unsigned long node_memmap_pfn[]; -extern unsigned long node_percpu_pfn[]; -extern unsigned long node_free_pfn[]; -#ifdef CONFIG_HIGHMEM -extern unsigned long node_lowmem_end_pfn[]; -#endif -#ifdef CONFIG_PCI -extern unsigned long pci_reserve_start_pfn; -extern unsigned long pci_reserve_end_pfn; -#endif - -#endif /* CONFIG_DISCONTIGMEM */ - -#endif /* _ASM_TILE_MMZONE_H */ diff --git a/arch/tile/include/asm/module.h b/arch/tile/include/asm/module.h deleted file mode 100644 index 44ed07ccd3d2..000000000000 --- a/arch/tile/include/asm/module.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_MODULE_H -#define _ASM_TILE_MODULE_H - -#include <arch/chip.h> - -#include <asm-generic/module.h> - -/* We can't use modules built with different page sizes. */ -#if defined(CONFIG_PAGE_SIZE_16KB) -# define MODULE_PGSZ " 16KB" -#elif defined(CONFIG_PAGE_SIZE_64KB) -# define MODULE_PGSZ " 64KB" -#else -# define MODULE_PGSZ "" -#endif - -/* We don't really support no-SMP so tag if someone tries. */ -#ifdef CONFIG_SMP -#define MODULE_NOSMP "" -#else -#define MODULE_NOSMP " nosmp" -#endif - -#define MODULE_ARCH_VERMAGIC CHIP_ARCH_NAME MODULE_PGSZ MODULE_NOSMP - -#endif /* _ASM_TILE_MODULE_H */ diff --git a/arch/tile/include/asm/page.h b/arch/tile/include/asm/page.h deleted file mode 100644 index 498a5f71245d..000000000000 --- a/arch/tile/include/asm/page.h +++ /dev/null @@ -1,345 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_PAGE_H -#define _ASM_TILE_PAGE_H - -#include <linux/const.h> -#include <hv/hypervisor.h> -#include <arch/chip.h> - -/* PAGE_SHIFT and HPAGE_SHIFT determine the page sizes. */ -#if defined(CONFIG_PAGE_SIZE_4KB) /* tilepro only */ -#define PAGE_SHIFT 12 -#define CTX_PAGE_FLAG HV_CTX_PG_SM_4K -#elif defined(CONFIG_PAGE_SIZE_16KB) -#define PAGE_SHIFT 14 -#define CTX_PAGE_FLAG HV_CTX_PG_SM_16K -#elif defined(CONFIG_PAGE_SIZE_64KB) -#define PAGE_SHIFT 16 -#define CTX_PAGE_FLAG HV_CTX_PG_SM_64K -#else -#error Page size not specified in Kconfig -#endif -#define HPAGE_SHIFT HV_LOG2_DEFAULT_PAGE_SIZE_LARGE - -#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) -#define HPAGE_SIZE (_AC(1, UL) << HPAGE_SHIFT) - -#define PAGE_MASK (~(PAGE_SIZE - 1)) -#define HPAGE_MASK (~(HPAGE_SIZE - 1)) - -/* - * If the Kconfig doesn't specify, set a maximum zone order that - * is enough so that we can create huge pages from small pages given - * the respective sizes of the two page types. See <linux/mmzone.h>. - */ -#ifndef CONFIG_FORCE_MAX_ZONEORDER -#define CONFIG_FORCE_MAX_ZONEORDER (HPAGE_SHIFT - PAGE_SHIFT + 1) -#endif - -#ifndef __ASSEMBLY__ - -#include <linux/types.h> -#include <linux/string.h> - -struct page; - -static inline void clear_page(void *page) -{ - memset(page, 0, PAGE_SIZE); -} - -static inline void copy_page(void *to, void *from) -{ - memcpy(to, from, PAGE_SIZE); -} - -static inline void clear_user_page(void *page, unsigned long vaddr, - struct page *pg) -{ - clear_page(page); -} - -static inline void copy_user_page(void *to, void *from, unsigned long vaddr, - struct page *topage) -{ - copy_page(to, from); -} - -/* - * Hypervisor page tables are made of the same basic structure. - */ - -typedef HV_PTE pte_t; -typedef HV_PTE pgd_t; -typedef HV_PTE pgprot_t; - -/* - * User L2 page tables are managed as one L2 page table per page, - * because we use the page allocator for them. This keeps the allocation - * simple, but it's also inefficient, since L2 page tables are much smaller - * than pages (currently 2KB vs 64KB). So we should revisit this. - */ -typedef struct page *pgtable_t; - -/* Must be a macro since it is used to create constants. */ -#define __pgprot(val) hv_pte(val) - -/* Rarely-used initializers, typically with a "zero" value. */ -#define __pte(x) hv_pte(x) -#define __pgd(x) hv_pte(x) - -static inline u64 pgprot_val(pgprot_t pgprot) -{ - return hv_pte_val(pgprot); -} - -static inline u64 pte_val(pte_t pte) -{ - return hv_pte_val(pte); -} - -static inline u64 pgd_val(pgd_t pgd) -{ - return hv_pte_val(pgd); -} - -#ifdef __tilegx__ - -typedef HV_PTE pmd_t; - -#define __pmd(x) hv_pte(x) - -static inline u64 pmd_val(pmd_t pmd) -{ - return hv_pte_val(pmd); -} - -#endif - -static inline __attribute_const__ int get_order(unsigned long size) -{ - return BITS_PER_LONG - __builtin_clzl((size - 1) >> PAGE_SHIFT); -} - -#endif /* !__ASSEMBLY__ */ - -#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) - -#define HUGE_MAX_HSTATE 6 - -#ifdef CONFIG_HUGETLB_PAGE -#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA -#endif - -/* Allow overriding how much VA or PA the kernel will use. */ -#define MAX_PA_WIDTH CHIP_PA_WIDTH() -#define MAX_VA_WIDTH CHIP_VA_WIDTH() - -/* Each memory controller has PAs distinct in their high bits. */ -#define NR_PA_HIGHBIT_SHIFT (MAX_PA_WIDTH - CHIP_LOG_NUM_MSHIMS()) -#define NR_PA_HIGHBIT_VALUES (1 << CHIP_LOG_NUM_MSHIMS()) -#define __pa_to_highbits(pa) ((phys_addr_t)(pa) >> NR_PA_HIGHBIT_SHIFT) -#define __pfn_to_highbits(pfn) ((pfn) >> (NR_PA_HIGHBIT_SHIFT - PAGE_SHIFT)) - -#ifdef __tilegx__ - -/* - * We reserve the lower half of memory for user-space programs, and the - * upper half for system code. We re-map all of physical memory in the - * upper half, which takes a quarter of our VA space. Then we have - * the vmalloc regions. The supervisor code lives at the highest address, - * with the hypervisor above that. - * - * Loadable kernel modules are placed immediately after the static - * supervisor code, with each being allocated a 256MB region of - * address space, so we don't have to worry about the range of "jal" - * and other branch instructions. - * - * For now we keep life simple and just allocate one pmd (4GB) for vmalloc. - * Similarly, for now we don't play any struct page mapping games. - */ - -#if MAX_PA_WIDTH + 2 > MAX_VA_WIDTH -# error Too much PA to map with the VA available! -#endif - -#define PAGE_OFFSET (-(_AC(1, UL) << (MAX_VA_WIDTH - 1))) -#define KERNEL_HIGH_VADDR _AC(0xfffffff800000000, UL) /* high 32GB */ -#define FIXADDR_BASE (KERNEL_HIGH_VADDR - 0x300000000) /* 4 GB */ -#define FIXADDR_TOP (KERNEL_HIGH_VADDR - 0x200000000) /* 4 GB */ -#define _VMALLOC_START FIXADDR_TOP -#define MEM_SV_START (KERNEL_HIGH_VADDR - 0x100000000) /* 256 MB */ -#define MEM_MODULE_START (MEM_SV_START + (256*1024*1024)) /* 256 MB */ -#define MEM_MODULE_END (MEM_MODULE_START + (256*1024*1024)) - -#else /* !__tilegx__ */ - -/* - * A PAGE_OFFSET of 0xC0000000 means that the kernel has - * a virtual address space of one gigabyte, which limits the - * amount of physical memory you can use to about 768MB. - * If you want more physical memory than this then see the CONFIG_HIGHMEM - * option in the kernel configuration. - * - * The top 16MB chunk in the table below is unavailable to Linux. Since - * the kernel interrupt vectors must live at ether 0xfe000000 or 0xfd000000 - * (depending on whether the kernel is at PL2 or Pl1), we map all of the - * bottom of RAM at this address with a huge page table entry to minimize - * its ITLB footprint (as well as at PAGE_OFFSET). The last architected - * requirement is that user interrupt vectors live at 0xfc000000, so we - * make that range of memory available to user processes. The remaining - * regions are sized as shown; the first four addresses use the PL 1 - * values, and after that, we show "typical" values, since the actual - * addresses depend on kernel #defines. - * - * MEM_HV_START 0xfe000000 - * MEM_SV_START (kernel code) 0xfd000000 - * MEM_USER_INTRPT (user vector) 0xfc000000 - * FIX_KMAP_xxx 0xfa000000 (via NR_CPUS * KM_TYPE_NR) - * PKMAP_BASE 0xf9000000 (via LAST_PKMAP) - * VMALLOC_START 0xf7000000 (via VMALLOC_RESERVE) - * mapped LOWMEM 0xc0000000 - */ - -#define MEM_USER_INTRPT _AC(0xfc000000, UL) -#define MEM_SV_START _AC(0xfd000000, UL) -#define MEM_HV_START _AC(0xfe000000, UL) - -#define INTRPT_SIZE 0x4000 - -/* Tolerate page size larger than the architecture interrupt region size. */ -#if PAGE_SIZE > INTRPT_SIZE -#undef INTRPT_SIZE -#define INTRPT_SIZE PAGE_SIZE -#endif - -#define KERNEL_HIGH_VADDR MEM_USER_INTRPT -#define FIXADDR_TOP (KERNEL_HIGH_VADDR - PAGE_SIZE) - -#define PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL) - -/* On 32-bit architectures we mix kernel modules in with other vmaps. */ -#define MEM_MODULE_START VMALLOC_START -#define MEM_MODULE_END VMALLOC_END - -#endif /* __tilegx__ */ - -#if !defined(__ASSEMBLY__) && !defined(VDSO_BUILD) - -#ifdef CONFIG_HIGHMEM - -/* Map kernel virtual addresses to page frames, in HPAGE_SIZE chunks. */ -extern unsigned long pbase_map[]; -extern void *vbase_map[]; - -static inline unsigned long kaddr_to_pfn(const volatile void *_kaddr) -{ - unsigned long kaddr = (unsigned long)_kaddr; - return pbase_map[kaddr >> HPAGE_SHIFT] + - ((kaddr & (HPAGE_SIZE - 1)) >> PAGE_SHIFT); -} - -static inline void *pfn_to_kaddr(unsigned long pfn) -{ - return vbase_map[__pfn_to_highbits(pfn)] + (pfn << PAGE_SHIFT); -} - -static inline phys_addr_t virt_to_phys(const volatile void *kaddr) -{ - unsigned long pfn = kaddr_to_pfn(kaddr); - return ((phys_addr_t)pfn << PAGE_SHIFT) + - ((unsigned long)kaddr & (PAGE_SIZE-1)); -} - -static inline void *phys_to_virt(phys_addr_t paddr) -{ - return pfn_to_kaddr(paddr >> PAGE_SHIFT) + (paddr & (PAGE_SIZE-1)); -} - -/* With HIGHMEM, we pack PAGE_OFFSET through high_memory with all valid VAs. */ -static inline int virt_addr_valid(const volatile void *kaddr) -{ - extern void *high_memory; /* copied from <linux/mm.h> */ - return ((unsigned long)kaddr >= PAGE_OFFSET && kaddr < high_memory); -} - -#else /* !CONFIG_HIGHMEM */ - -static inline unsigned long kaddr_to_pfn(const volatile void *kaddr) -{ - return ((unsigned long)kaddr - PAGE_OFFSET) >> PAGE_SHIFT; -} - -static inline void *pfn_to_kaddr(unsigned long pfn) -{ - return (void *)((pfn << PAGE_SHIFT) + PAGE_OFFSET); -} - -static inline phys_addr_t virt_to_phys(const volatile void *kaddr) -{ - return (phys_addr_t)((unsigned long)kaddr - PAGE_OFFSET); -} - -static inline void *phys_to_virt(phys_addr_t paddr) -{ - return (void *)((unsigned long)paddr + PAGE_OFFSET); -} - -/* Check that the given address is within some mapped range of PAs. */ -#define virt_addr_valid(kaddr) pfn_valid(kaddr_to_pfn(kaddr)) - -#endif /* !CONFIG_HIGHMEM */ - -/* All callers are not consistent in how they call these functions. */ -#define __pa(kaddr) virt_to_phys((void *)(unsigned long)(kaddr)) -#define __va(paddr) phys_to_virt((phys_addr_t)(paddr)) - -extern int devmem_is_allowed(unsigned long pagenr); - -#ifdef CONFIG_FLATMEM -static inline int pfn_valid(unsigned long pfn) -{ - return pfn < max_mapnr; -} -#endif - -/* Provide as macros since these require some other headers included. */ -#define page_to_pa(page) ((phys_addr_t)(page_to_pfn(page)) << PAGE_SHIFT) -#define virt_to_page(kaddr) pfn_to_page(kaddr_to_pfn((void *)(kaddr))) -#define page_to_virt(page) pfn_to_kaddr(page_to_pfn(page)) - -/* - * The kernel text is mapped at MEM_SV_START as read-only. To allow - * modifying kernel text, it is also mapped at PAGE_OFFSET as read-write. - * This macro converts a kernel address to its writable kernel text mapping, - * which is used to modify the text code on a running kernel by kgdb, - * ftrace, kprobe, jump label, etc. - */ -#define ktext_writable_addr(kaddr) \ - ((unsigned long)(kaddr) - MEM_SV_START + PAGE_OFFSET) - -struct mm_struct; -extern pte_t *virt_to_pte(struct mm_struct *mm, unsigned long addr); -extern pte_t *virt_to_kpte(unsigned long kaddr); - -#endif /* !__ASSEMBLY__ */ - -#define VM_DATA_DEFAULT_FLAGS \ - (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#include <asm-generic/memory_model.h> - -#endif /* _ASM_TILE_PAGE_H */ diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h deleted file mode 100644 index fe3de505b024..000000000000 --- a/arch/tile/include/asm/pci.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_PCI_H -#define _ASM_TILE_PCI_H - -#include <linux/dma-mapping.h> -#include <linux/pci.h> -#include <asm-generic/pci_iomap.h> - -#ifndef __tilegx__ - -/* - * Structure of a PCI controller (host bridge) - */ -struct pci_controller { - int index; /* PCI domain number */ - struct pci_bus *root_bus; - - int last_busno; - - int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */ - int hv_mem_fd; /* fd to Hypervisor for MMIO operations */ - - struct pci_ops *ops; - - int irq_base; /* Base IRQ from the Hypervisor */ - int plx_gen1; /* flag for PLX Gen 1 configuration */ - - /* Address ranges that are routed to this controller/bridge. */ - struct resource mem_resources[3]; -}; - -/* - * This flag tells if the platform is TILEmpower that needs - * special configuration for the PLX switch chip. - */ -extern int tile_plx_gen1; - -static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} - -#define TILE_NUM_PCIE 2 - -/* - * The hypervisor maps the entirety of CPA-space as bus addresses, so - * bus addresses are physical addresses. The networking and block - * device layers use this boolean for bounce buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS 1 - -/* generic pci stuff */ -#include <asm-generic/pci.h> - -#else - -#include <asm/page.h> -#include <gxio/trio.h> - -/** - * We reserve the hugepage-size address range at the top of the 64-bit address - * space to serve as the PCI window, emulating the BAR0 space of an endpoint - * device. This window is used by the chip-to-chip applications running on - * the RC node. The reason for carving out this window is that Mem-Maps that - * back up this window will not overlap with those that map the real physical - * memory. - */ -#define PCIE_HOST_BAR0_SIZE HPAGE_SIZE -#define PCIE_HOST_BAR0_START HPAGE_MASK - -/** - * The first PAGE_SIZE of the above "BAR" window is mapped to the - * gxpci_host_regs structure. - */ -#define PCIE_HOST_REGS_SIZE PAGE_SIZE - -/* - * This is the PCI address where the Mem-Map interrupt regions start. - * We use the 2nd to the last huge page of the 64-bit address space. - * The last huge page is used for the rootcomplex "bar", for C2C purpose. - */ -#define MEM_MAP_INTR_REGIONS_BASE (HPAGE_MASK - HPAGE_SIZE) - -/* - * Each Mem-Map interrupt region occupies 4KB. - */ -#define MEM_MAP_INTR_REGION_SIZE (1 << TRIO_MAP_MEM_LIM__ADDR_SHIFT) - -/* - * Allocate the PCI BAR window right below 4GB. - */ -#define TILE_PCI_BAR_WINDOW_TOP (1ULL << 32) - -/* - * Allocate 1GB for the PCI BAR window. - */ -#define TILE_PCI_BAR_WINDOW_SIZE (1 << 30) - -/* - * This is the highest bus address targeting the host memory that - * can be generated by legacy PCI devices with 32-bit or less - * DMA capability, dictated by the BAR window size and location. - */ -#define TILE_PCI_MAX_DIRECT_DMA_ADDRESS \ - (TILE_PCI_BAR_WINDOW_TOP - TILE_PCI_BAR_WINDOW_SIZE - 1) - -/* - * We shift the PCI bus range for all the physical memory up by the whole PA - * range. The corresponding CPA of an incoming PCI request will be the PCI - * address minus TILE_PCI_MEM_MAP_BASE_OFFSET. This also implies - * that the 64-bit capable devices will be given DMA addresses as - * the CPA plus TILE_PCI_MEM_MAP_BASE_OFFSET. To support 32-bit - * devices, we create a separate map region that handles the low - * 4GB. - * - * This design lets us avoid the "PCI hole" problem where the host bridge - * won't pass DMA traffic with target addresses that happen to fall within the - * BAR space. This enables us to use all the physical memory for DMA, instead - * of wasting the same amount of physical memory as the BAR window size. - */ -#define TILE_PCI_MEM_MAP_BASE_OFFSET (1ULL << CHIP_PA_WIDTH()) - -/* - * Start of the PCI memory resource, which starts at the end of the - * maximum system physical RAM address. - */ -#define TILE_PCI_MEM_START (1ULL << CHIP_PA_WIDTH()) - -/* - * Structure of a PCI controller (host bridge) on Gx. - */ -struct pci_controller { - - /* Pointer back to the TRIO that this PCIe port is connected to. */ - gxio_trio_context_t *trio; - int mac; /* PCIe mac index on the TRIO shim */ - int trio_index; /* Index of TRIO shim that contains the MAC. */ - - int pio_mem_index; /* PIO region index for memory access */ - -#ifdef CONFIG_TILE_PCI_IO - int pio_io_index; /* PIO region index for I/O space access */ -#endif - - /* - * Mem-Map regions for all the memory controllers so that Linux can - * map all of its physical memory space to the PCI bus. - */ - int mem_maps[MAX_NUMNODES]; - - int index; /* PCI domain number */ - struct pci_bus *root_bus; - - /* PCI I/O space resource for this controller. */ - struct resource io_space; - char io_space_name[32]; - - /* PCI memory space resource for this controller. */ - struct resource mem_space; - char mem_space_name[32]; - - uint64_t mem_offset; /* cpu->bus memory mapping offset. */ - - int first_busno; - - struct pci_ops *ops; - - /* Table that maps the INTx numbers to Linux irq numbers. */ - int irq_intx_table[4]; -}; - -extern struct pci_controller pci_controllers[TILEGX_NUM_TRIO * TILEGX_TRIO_PCIES]; -extern gxio_trio_context_t trio_contexts[TILEGX_NUM_TRIO]; -extern int num_trio_shims; - -extern void pci_iounmap(struct pci_dev *dev, void __iomem *); - -/* - * The PCI address space does not equal the physical memory address - * space (we have an IOMMU). The IDE and SCSI device layers use this - * boolean for bounce buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS 0 - -#endif /* __tilegx__ */ - -int __init tile_pci_init(void); -int __init pcibios_init(void); - -void pcibios_fixup_bus(struct pci_bus *bus); - -#define pci_domain_nr(bus) (((struct pci_controller *)(bus)->sysdata)->index) - -/* - * This decides whether to display the domain number in /proc. - */ -static inline int pci_proc_domain(struct pci_bus *bus) -{ - return 1; -} - -/* - * pcibios_assign_all_busses() tells whether or not the bus numbers - * should be reassigned, in case the BIOS didn't do it correctly, or - * in case we don't have a BIOS and we want to let Linux do it. - */ -static inline int pcibios_assign_all_busses(void) -{ - return 1; -} - -#define PCIBIOS_MIN_MEM 0 -/* Minimum PCI I/O address, starting at the page boundary. */ -#define PCIBIOS_MIN_IO PAGE_SIZE - -/* Use any cpu for PCI. */ -#define cpumask_of_pcibus(bus) cpu_online_mask - -#endif /* _ASM_TILE_PCI_H */ diff --git a/arch/tile/include/asm/percpu.h b/arch/tile/include/asm/percpu.h deleted file mode 100644 index 4f7ae39fa202..000000000000 --- a/arch/tile/include/asm/percpu.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_PERCPU_H -#define _ASM_TILE_PERCPU_H - -register unsigned long my_cpu_offset_reg asm("tp"); - -#ifdef CONFIG_PREEMPT -/* - * For full preemption, we can't just use the register variable - * directly, since we need barrier() to hazard against it, causing the - * compiler to reload anything computed from a previous "tp" value. - * But we also don't want to use volatile asm, since we'd like the - * compiler to be able to cache the value across multiple percpu reads. - * So we use a fake stack read as a hazard against barrier(). - * The 'U' constraint is like 'm' but disallows postincrement. - */ -static inline unsigned long __my_cpu_offset(void) -{ - unsigned long tp; - register unsigned long *sp asm("sp"); - asm("move %0, tp" : "=r" (tp) : "U" (*sp)); - return tp; -} -#define __my_cpu_offset __my_cpu_offset() -#else -/* - * We don't need to hazard against barrier() since "tp" doesn't ever - * change with PREEMPT_NONE, and with PREEMPT_VOLUNTARY it only - * changes at function call points, at which we are already re-reading - * the value of "tp" due to "my_cpu_offset_reg" being a global variable. - */ -#define __my_cpu_offset my_cpu_offset_reg -#endif - -#define set_my_cpu_offset(tp) (my_cpu_offset_reg = (tp)) - -#include <asm-generic/percpu.h> - -#endif /* _ASM_TILE_PERCPU_H */ diff --git a/arch/tile/include/asm/perf_event.h b/arch/tile/include/asm/perf_event.h deleted file mode 100644 index 59c5b164e5b6..000000000000 --- a/arch/tile/include/asm/perf_event.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright 2014 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_PERF_EVENT_H -#define _ASM_TILE_PERF_EVENT_H - -#include <linux/percpu.h> -DECLARE_PER_CPU(u64, perf_irqs); - -unsigned long handle_syscall_link_address(void); -#endif /* _ASM_TILE_PERF_EVENT_H */ diff --git a/arch/tile/include/asm/pgalloc.h b/arch/tile/include/asm/pgalloc.h deleted file mode 100644 index 1b902508b664..000000000000 --- a/arch/tile/include/asm/pgalloc.h +++ /dev/null @@ -1,164 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_PGALLOC_H -#define _ASM_TILE_PGALLOC_H - -#include <linux/threads.h> -#include <linux/mm.h> -#include <linux/mmzone.h> -#include <asm/fixmap.h> -#include <asm/page.h> -#include <hv/hypervisor.h> - -/* Bits for the size of the second-level page table. */ -#define L2_KERNEL_PGTABLE_SHIFT _HV_LOG2_L2_SIZE(HPAGE_SHIFT, PAGE_SHIFT) - -/* How big is a kernel L2 page table? */ -#define L2_KERNEL_PGTABLE_SIZE (1UL << L2_KERNEL_PGTABLE_SHIFT) - -/* We currently allocate user L2 page tables by page (unlike kernel L2s). */ -#if L2_KERNEL_PGTABLE_SHIFT < PAGE_SHIFT -#define L2_USER_PGTABLE_SHIFT PAGE_SHIFT -#else -#define L2_USER_PGTABLE_SHIFT L2_KERNEL_PGTABLE_SHIFT -#endif - -/* How many pages do we need, as an "order", for a user L2 page table? */ -#define L2_USER_PGTABLE_ORDER (L2_USER_PGTABLE_SHIFT - PAGE_SHIFT) - -static inline void set_pmd(pmd_t *pmdp, pmd_t pmd) -{ -#ifdef CONFIG_64BIT - set_pte(pmdp, pmd); -#else - set_pte(&pmdp->pud.pgd, pmd.pud.pgd); -#endif -} - -static inline void pmd_populate_kernel(struct mm_struct *mm, - pmd_t *pmd, pte_t *ptep) -{ - set_pmd(pmd, ptfn_pmd(HV_CPA_TO_PTFN(__pa(ptep)), - __pgprot(_PAGE_PRESENT))); -} - -static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, - pgtable_t page) -{ - set_pmd(pmd, ptfn_pmd(HV_CPA_TO_PTFN(PFN_PHYS(page_to_pfn(page))), - __pgprot(_PAGE_PRESENT))); -} - -/* - * Allocate and free page tables. - */ - -extern pgd_t *pgd_alloc(struct mm_struct *mm); -extern void pgd_free(struct mm_struct *mm, pgd_t *pgd); - -extern pgtable_t pgtable_alloc_one(struct mm_struct *mm, unsigned long address, - int order); -extern void pgtable_free(struct mm_struct *mm, struct page *pte, int order); - -static inline pgtable_t pte_alloc_one(struct mm_struct *mm, - unsigned long address) -{ - return pgtable_alloc_one(mm, address, L2_USER_PGTABLE_ORDER); -} - -static inline void pte_free(struct mm_struct *mm, struct page *pte) -{ - pgtable_free(mm, pte, L2_USER_PGTABLE_ORDER); -} - -#define pmd_pgtable(pmd) pmd_page(pmd) - -static inline pte_t * -pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) -{ - return pfn_to_kaddr(page_to_pfn(pte_alloc_one(mm, address))); -} - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - BUG_ON((unsigned long)pte & (PAGE_SIZE-1)); - pte_free(mm, virt_to_page(pte)); -} - -extern void __pgtable_free_tlb(struct mmu_gather *tlb, struct page *pte, - unsigned long address, int order); -static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte, - unsigned long address) -{ - __pgtable_free_tlb(tlb, pte, address, L2_USER_PGTABLE_ORDER); -} - -#define check_pgt_cache() do { } while (0) - -/* - * Get the small-page pte_t lowmem entry for a given pfn. - * This may or may not be in use, depending on whether the initial - * huge-page entry for the page has already been shattered. - */ -pte_t *get_prealloc_pte(unsigned long pfn); - -/* During init, we can shatter kernel huge pages if needed. */ -void shatter_pmd(pmd_t *pmd); - -/* After init, a more complex technique is required. */ -void shatter_huge_page(unsigned long addr); - -#ifdef __tilegx__ - -#define pud_populate(mm, pud, pmd) \ - pmd_populate_kernel((mm), (pmd_t *)(pud), (pte_t *)(pmd)) - -/* Bits for the size of the L1 (intermediate) page table. */ -#define L1_KERNEL_PGTABLE_SHIFT _HV_LOG2_L1_SIZE(HPAGE_SHIFT) - -/* How big is a kernel L2 page table? */ -#define L1_KERNEL_PGTABLE_SIZE (1UL << L1_KERNEL_PGTABLE_SHIFT) - -/* We currently allocate L1 page tables by page. */ -#if L1_KERNEL_PGTABLE_SHIFT < PAGE_SHIFT -#define L1_USER_PGTABLE_SHIFT PAGE_SHIFT -#else -#define L1_USER_PGTABLE_SHIFT L1_KERNEL_PGTABLE_SHIFT -#endif - -/* How many pages do we need, as an "order", for an L1 page table? */ -#define L1_USER_PGTABLE_ORDER (L1_USER_PGTABLE_SHIFT - PAGE_SHIFT) - -static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address) -{ - struct page *p = pgtable_alloc_one(mm, address, L1_USER_PGTABLE_ORDER); - return (pmd_t *)page_to_virt(p); -} - -static inline void pmd_free(struct mm_struct *mm, pmd_t *pmdp) -{ - pgtable_free(mm, virt_to_page(pmdp), L1_USER_PGTABLE_ORDER); -} - -static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp, - unsigned long address) -{ - __pgtable_free_tlb(tlb, virt_to_page(pmdp), address, - L1_USER_PGTABLE_ORDER); -} - -#endif /* __tilegx__ */ - -#endif /* _ASM_TILE_PGALLOC_H */ diff --git a/arch/tile/include/asm/pgtable.h b/arch/tile/include/asm/pgtable.h deleted file mode 100644 index adfa21b18488..000000000000 --- a/arch/tile/include/asm/pgtable.h +++ /dev/null @@ -1,518 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * This file contains the functions and defines necessary to modify and use - * the TILE page table tree. - */ - -#ifndef _ASM_TILE_PGTABLE_H -#define _ASM_TILE_PGTABLE_H - -#include <hv/hypervisor.h> - -#ifndef __ASSEMBLY__ - -#include <linux/bitops.h> -#include <linux/threads.h> -#include <linux/slab.h> -#include <linux/list.h> -#include <linux/spinlock.h> -#include <linux/pfn.h> -#include <asm/processor.h> -#include <asm/fixmap.h> -#include <asm/page.h> - -struct mm_struct; -struct vm_area_struct; - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -extern unsigned long empty_zero_page[PAGE_SIZE/sizeof(unsigned long)]; -#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) - -extern pgd_t swapper_pg_dir[]; -extern pgprot_t swapper_pgprot; -extern struct kmem_cache *pgd_cache; -extern spinlock_t pgd_lock; -extern struct list_head pgd_list; - -/* - * The very last slots in the pgd_t are for addresses unusable by Linux - * (pgd_addr_invalid() returns true). So we use them for the list structure. - * The x86 code we are modelled on uses the page->private/index fields - * (older 2.6 kernels) or the lru list (newer 2.6 kernels), but since - * our pgds are so much smaller than a page, it seems a waste to - * spend a whole page on each pgd. - */ -#define PGD_LIST_OFFSET \ - ((PTRS_PER_PGD * sizeof(pgd_t)) - sizeof(struct list_head)) -#define pgd_to_list(pgd) \ - ((struct list_head *)((char *)(pgd) + PGD_LIST_OFFSET)) -#define list_to_pgd(list) \ - ((pgd_t *)((char *)(list) - PGD_LIST_OFFSET)) - -extern void pgtable_cache_init(void); -extern void paging_init(void); -extern void set_page_homes(void); - -#define FIRST_USER_ADDRESS 0UL - -#define _PAGE_PRESENT HV_PTE_PRESENT -#define _PAGE_HUGE_PAGE HV_PTE_PAGE -#define _PAGE_SUPER_PAGE HV_PTE_SUPER -#define _PAGE_READABLE HV_PTE_READABLE -#define _PAGE_WRITABLE HV_PTE_WRITABLE -#define _PAGE_EXECUTABLE HV_PTE_EXECUTABLE -#define _PAGE_ACCESSED HV_PTE_ACCESSED -#define _PAGE_DIRTY HV_PTE_DIRTY -#define _PAGE_GLOBAL HV_PTE_GLOBAL -#define _PAGE_USER HV_PTE_USER - -/* - * All the "standard" bits. Cache-control bits are managed elsewhere. - * This is used to test for valid level-2 page table pointers by checking - * all the bits, and to mask away the cache control bits for mprotect. - */ -#define _PAGE_ALL (\ - _PAGE_PRESENT | \ - _PAGE_HUGE_PAGE | \ - _PAGE_SUPER_PAGE | \ - _PAGE_READABLE | \ - _PAGE_WRITABLE | \ - _PAGE_EXECUTABLE | \ - _PAGE_ACCESSED | \ - _PAGE_DIRTY | \ - _PAGE_GLOBAL | \ - _PAGE_USER \ -) - -#define PAGE_NONE \ - __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED) -#define PAGE_SHARED \ - __pgprot(_PAGE_PRESENT | _PAGE_READABLE | _PAGE_WRITABLE | \ - _PAGE_USER | _PAGE_ACCESSED) - -#define PAGE_SHARED_EXEC \ - __pgprot(_PAGE_PRESENT | _PAGE_READABLE | _PAGE_WRITABLE | \ - _PAGE_EXECUTABLE | _PAGE_USER | _PAGE_ACCESSED) -#define PAGE_COPY_NOEXEC \ - __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_READABLE) -#define PAGE_COPY_EXEC \ - __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | \ - _PAGE_READABLE | _PAGE_EXECUTABLE) -#define PAGE_COPY \ - PAGE_COPY_NOEXEC -#define PAGE_READONLY \ - __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_READABLE) -#define PAGE_READONLY_EXEC \ - __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | \ - _PAGE_READABLE | _PAGE_EXECUTABLE) - -#define _PAGE_KERNEL_RO \ - (_PAGE_PRESENT | _PAGE_GLOBAL | _PAGE_READABLE | _PAGE_ACCESSED) -#define _PAGE_KERNEL \ - (_PAGE_KERNEL_RO | _PAGE_WRITABLE | _PAGE_DIRTY) -#define _PAGE_KERNEL_EXEC (_PAGE_KERNEL_RO | _PAGE_EXECUTABLE) - -#define PAGE_KERNEL __pgprot(_PAGE_KERNEL) -#define PAGE_KERNEL_RO __pgprot(_PAGE_KERNEL_RO) -#define PAGE_KERNEL_EXEC __pgprot(_PAGE_KERNEL_EXEC) - -#define page_to_kpgprot(p) PAGE_KERNEL - -/* - * We could tighten these up, but for now writable or executable - * implies readable. - */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY -#define __P010 PAGE_COPY /* this is write-only, which we won't support */ -#define __P011 PAGE_COPY -#define __P100 PAGE_READONLY_EXEC -#define __P101 PAGE_READONLY_EXEC -#define __P110 PAGE_COPY_EXEC -#define __P111 PAGE_COPY_EXEC - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY -#define __S010 PAGE_SHARED -#define __S011 PAGE_SHARED -#define __S100 PAGE_READONLY_EXEC -#define __S101 PAGE_READONLY_EXEC -#define __S110 PAGE_SHARED_EXEC -#define __S111 PAGE_SHARED_EXEC - -/* - * All the normal _PAGE_ALL bits are ignored for PMDs, except PAGE_PRESENT - * and PAGE_HUGE_PAGE, which must be one and zero, respectively. - * We set the ignored bits to zero. - */ -#define _PAGE_TABLE _PAGE_PRESENT - -/* Inherit the caching flags from the old protection bits. */ -#define pgprot_modify(oldprot, newprot) \ - (pgprot_t) { ((oldprot).val & ~_PAGE_ALL) | (newprot).val } - -/* Just setting the PFN to zero suffices. */ -#define pte_pgprot(x) hv_pte_set_pa((x), 0) - -/* - * For PTEs and PDEs, we must clear the Present bit first when - * clearing a page table entry, so clear the bottom half first and - * enforce ordering with a barrier. - */ -static inline void __pte_clear(pte_t *ptep) -{ -#ifdef __tilegx__ - ptep->val = 0; -#else - u32 *tmp = (u32 *)ptep; - tmp[0] = 0; - barrier(); - tmp[1] = 0; -#endif -} -#define pte_clear(mm, addr, ptep) __pte_clear(ptep) - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -#define pte_present hv_pte_get_present -#define pte_mknotpresent hv_pte_clear_present -#define pte_user hv_pte_get_user -#define pte_read hv_pte_get_readable -#define pte_dirty hv_pte_get_dirty -#define pte_young hv_pte_get_accessed -#define pte_write hv_pte_get_writable -#define pte_exec hv_pte_get_executable -#define pte_huge hv_pte_get_page -#define pte_super hv_pte_get_super -#define pte_rdprotect hv_pte_clear_readable -#define pte_exprotect hv_pte_clear_executable -#define pte_mkclean hv_pte_clear_dirty -#define pte_mkold hv_pte_clear_accessed -#define pte_wrprotect hv_pte_clear_writable -#define pte_mksmall hv_pte_clear_page -#define pte_mkread hv_pte_set_readable -#define pte_mkexec hv_pte_set_executable -#define pte_mkdirty hv_pte_set_dirty -#define pte_mkyoung hv_pte_set_accessed -#define pte_mkwrite hv_pte_set_writable -#define pte_mkhuge hv_pte_set_page -#define pte_mksuper hv_pte_set_super - -#define pte_special(pte) 0 -#define pte_mkspecial(pte) (pte) - -/* - * Use some spare bits in the PTE for user-caching tags. - */ -#define pte_set_forcecache hv_pte_set_client0 -#define pte_get_forcecache hv_pte_get_client0 -#define pte_clear_forcecache hv_pte_clear_client0 -#define pte_set_anyhome hv_pte_set_client1 -#define pte_get_anyhome hv_pte_get_client1 -#define pte_clear_anyhome hv_pte_clear_client1 - -/* - * A migrating PTE has PAGE_PRESENT clear but all the other bits preserved. - */ -#define pte_migrating hv_pte_get_migrating -#define pte_mkmigrate(x) hv_pte_set_migrating(hv_pte_clear_present(x)) -#define pte_donemigrate(x) hv_pte_set_present(hv_pte_clear_migrating(x)) - -#define pte_ERROR(e) \ - pr_err("%s:%d: bad pte 0x%016llx\n", __FILE__, __LINE__, pte_val(e)) -#define pgd_ERROR(e) \ - pr_err("%s:%d: bad pgd 0x%016llx\n", __FILE__, __LINE__, pgd_val(e)) - -/* Return PA and protection info for a given kernel VA. */ -int va_to_cpa_and_pte(void *va, phys_addr_t *cpa, pte_t *pte); - -/* - * __set_pte() ensures we write the 64-bit PTE with 32-bit words in - * the right order on 32-bit platforms and also allows us to write - * hooks to check valid PTEs, etc., if we want. - */ -void __set_pte(pte_t *ptep, pte_t pte); - -/* - * set_pte() sets the given PTE and also sanity-checks the - * requested PTE against the page homecaching. Unspecified parts - * of the PTE are filled in when it is written to memory, i.e. all - * caching attributes if "!forcecache", or the home cpu if "anyhome". - */ -extern void set_pte(pte_t *ptep, pte_t pte); -#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval) -#define set_pte_atomic(pteptr, pteval) set_pte(pteptr, pteval) - -#define pte_page(x) pfn_to_page(pte_pfn(x)) - -static inline int pte_none(pte_t pte) -{ - return !pte.val; -} - -static inline unsigned long pte_pfn(pte_t pte) -{ - return PFN_DOWN(hv_pte_get_pa(pte)); -} - -/* Set or get the remote cache cpu in a pgprot with remote caching. */ -extern pgprot_t set_remote_cache_cpu(pgprot_t prot, int cpu); -extern int get_remote_cache_cpu(pgprot_t prot); - -static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot) -{ - return hv_pte_set_pa(prot, PFN_PHYS(pfn)); -} - -/* Support for priority mappings. */ -extern void start_mm_caching(struct mm_struct *mm); -extern void check_mm_caching(struct mm_struct *prev, struct mm_struct *next); - -/* - * Encode and de-code a swap entry (see <linux/swapops.h>). - * We put the swap file type+offset in the 32 high bits; - * I believe we can just leave the low bits clear. - */ -#define __swp_type(swp) ((swp).val & 0x1f) -#define __swp_offset(swp) ((swp).val >> 5) -#define __swp_entry(type, off) ((swp_entry_t) { (type) | ((off) << 5) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).val >> 32 }) -#define __swp_entry_to_pte(swp) ((pte_t) { (((long long) ((swp).val)) << 32) }) - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ - -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) - -/* - * If we are doing an mprotect(), just accept the new vma->vm_page_prot - * value and combine it with the PFN from the old PTE to get a new PTE. - */ -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - return pfn_pte(pte_pfn(pte), newprot); -} - -/* - * The pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD] - * - * This macro returns the index of the entry in the pgd page which would - * control the given virtual address. - */ -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)) - -/* - * pgd_offset() returns a (pgd_t *) - * pgd_index() is used get the offset into the pgd page's array of pgd_t's. - */ -#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) - -/* - * A shortcut which implies the use of the kernel's pgd, instead - * of a process's. - */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -#define pte_offset_map(dir, address) pte_offset_kernel(dir, address) -#define pte_unmap(pte) do { } while (0) - -/* Clear a non-executable kernel PTE and flush it from the TLB. */ -#define kpte_clear_flush(ptep, vaddr) \ -do { \ - pte_clear(&init_mm, (vaddr), (ptep)); \ - local_flush_tlb_page(FLUSH_NONEXEC, (vaddr), PAGE_SIZE); \ -} while (0) - -/* - * The kernel page tables contain what we need, and we flush when we - * change specific page table entries. - */ -#define update_mmu_cache(vma, address, pte) do { } while (0) - -#ifdef CONFIG_FLATMEM -#define kern_addr_valid(addr) (1) -#endif /* CONFIG_FLATMEM */ - -extern void vmalloc_sync_all(void); - -#endif /* !__ASSEMBLY__ */ - -#ifdef __tilegx__ -#include <asm/pgtable_64.h> -#else -#include <asm/pgtable_32.h> -#endif - -#ifndef __ASSEMBLY__ - -static inline int pmd_none(pmd_t pmd) -{ - /* - * Only check low word on 32-bit platforms, since it might be - * out of sync with upper half. - */ - return (unsigned long)pmd_val(pmd) == 0; -} - -static inline int pmd_present(pmd_t pmd) -{ - return pmd_val(pmd) & _PAGE_PRESENT; -} - -static inline int pmd_bad(pmd_t pmd) -{ - return ((pmd_val(pmd) & _PAGE_ALL) != _PAGE_TABLE); -} - -static inline unsigned long pages_to_mb(unsigned long npg) -{ - return npg >> (20 - PAGE_SHIFT); -} - -/* - * The pmd can be thought of an array like this: pmd_t[PTRS_PER_PMD] - * - * This function returns the index of the entry in the pmd which would - * control the given virtual address. - */ -static inline unsigned long pmd_index(unsigned long address) -{ - return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); -} - -#define __HAVE_ARCH_PMDP_TEST_AND_CLEAR_YOUNG -static inline int pmdp_test_and_clear_young(struct vm_area_struct *vma, - unsigned long address, - pmd_t *pmdp) -{ - return ptep_test_and_clear_young(vma, address, pmdp_ptep(pmdp)); -} - -#define __HAVE_ARCH_PMDP_SET_WRPROTECT -static inline void pmdp_set_wrprotect(struct mm_struct *mm, - unsigned long address, pmd_t *pmdp) -{ - ptep_set_wrprotect(mm, address, pmdp_ptep(pmdp)); -} - - -#define __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR -static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm, - unsigned long address, - pmd_t *pmdp) -{ - return pte_pmd(ptep_get_and_clear(mm, address, pmdp_ptep(pmdp))); -} - -static inline void __set_pmd(pmd_t *pmdp, pmd_t pmdval) -{ - set_pte(pmdp_ptep(pmdp), pmd_pte(pmdval)); -} - -#define set_pmd_at(mm, addr, pmdp, pmdval) __set_pmd(pmdp, pmdval) - -/* Create a pmd from a PTFN. */ -static inline pmd_t ptfn_pmd(unsigned long ptfn, pgprot_t prot) -{ - return pte_pmd(hv_pte_set_ptfn(prot, ptfn)); -} - -/* Return the page-table frame number (ptfn) that a pmd_t points at. */ -#define pmd_ptfn(pmd) hv_pte_get_ptfn(pmd_pte(pmd)) - -/* - * A given kernel pmd_t maps to a specific virtual address (either a - * kernel huge page or a kernel pte_t table). Since kernel pte_t - * tables can be aligned at sub-page granularity, this function can - * return non-page-aligned pointers, despite its name. - */ -static inline unsigned long pmd_page_vaddr(pmd_t pmd) -{ - phys_addr_t pa = - (phys_addr_t)pmd_ptfn(pmd) << HV_LOG2_PAGE_TABLE_ALIGN; - return (unsigned long)__va(pa); -} - -/* - * A pmd_t points to the base of a huge page or to a pte_t array. - * If a pte_t array, since we can have multiple per page, we don't - * have a one-to-one mapping of pmd_t's to pages. However, this is - * OK for pte_lockptr(), since we just end up with potentially one - * lock being used for several pte_t arrays. - */ -#define pmd_page(pmd) pfn_to_page(PFN_DOWN(HV_PTFN_TO_CPA(pmd_ptfn(pmd)))) - -static inline void pmd_clear(pmd_t *pmdp) -{ - __pte_clear(pmdp_ptep(pmdp)); -} - -#define pmd_mknotpresent(pmd) pte_pmd(pte_mknotpresent(pmd_pte(pmd))) -#define pmd_young(pmd) pte_young(pmd_pte(pmd)) -#define pmd_mkyoung(pmd) pte_pmd(pte_mkyoung(pmd_pte(pmd))) -#define pmd_mkold(pmd) pte_pmd(pte_mkold(pmd_pte(pmd))) -#define pmd_mkwrite(pmd) pte_pmd(pte_mkwrite(pmd_pte(pmd))) -#define pmd_write(pmd) pte_write(pmd_pte(pmd)) -#define pmd_wrprotect(pmd) pte_pmd(pte_wrprotect(pmd_pte(pmd))) -#define pmd_mkdirty(pmd) pte_pmd(pte_mkdirty(pmd_pte(pmd))) -#define pmd_huge_page(pmd) pte_huge(pmd_pte(pmd)) -#define pmd_mkhuge(pmd) pte_pmd(pte_mkhuge(pmd_pte(pmd))) - -#define pfn_pmd(pfn, pgprot) pte_pmd(pfn_pte((pfn), (pgprot))) -#define pmd_pfn(pmd) pte_pfn(pmd_pte(pmd)) -#define mk_pmd(page, pgprot) pfn_pmd(page_to_pfn(page), (pgprot)) - -static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot) -{ - return pfn_pmd(pmd_pfn(pmd), newprot); -} - -#ifdef CONFIG_TRANSPARENT_HUGEPAGE -#define pmd_trans_huge pmd_huge_page -#endif /* CONFIG_TRANSPARENT_HUGEPAGE */ - -/* - * The pte page can be thought of an array like this: pte_t[PTRS_PER_PTE] - * - * This macro returns the index of the entry in the pte page which would - * control the given virtual address. - */ -static inline unsigned long pte_index(unsigned long address) -{ - return (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1); -} - -static inline pte_t *pte_offset_kernel(pmd_t *pmd, unsigned long address) -{ - return (pte_t *)pmd_page_vaddr(*pmd) + pte_index(address); -} - -#include <asm-generic/pgtable.h> - -/* Support /proc/NN/pgtable API. */ -struct seq_file; -int arch_proc_pgtable_show(struct seq_file *m, struct mm_struct *mm, - unsigned long vaddr, unsigned long pagesize, - pte_t *ptep, void **datap); - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_TILE_PGTABLE_H */ diff --git a/arch/tile/include/asm/pgtable_32.h b/arch/tile/include/asm/pgtable_32.h deleted file mode 100644 index 5f8c615cb5e9..000000000000 --- a/arch/tile/include/asm/pgtable_32.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - */ - -#ifndef _ASM_TILE_PGTABLE_32_H -#define _ASM_TILE_PGTABLE_32_H - -/* - * The level-1 index is defined by the huge page size. A PGD is composed - * of PTRS_PER_PGD pgd_t's and is the top level of the page table. - */ -#define PGDIR_SHIFT HPAGE_SHIFT -#define PGDIR_SIZE HPAGE_SIZE -#define PGDIR_MASK (~(PGDIR_SIZE-1)) -#define PTRS_PER_PGD _HV_L1_ENTRIES(HPAGE_SHIFT) -#define PGD_INDEX(va) _HV_L1_INDEX(va, HPAGE_SHIFT) -#define SIZEOF_PGD _HV_L1_SIZE(HPAGE_SHIFT) - -/* - * The level-2 index is defined by the difference between the huge - * page size and the normal page size. A PTE is composed of - * PTRS_PER_PTE pte_t's and is the bottom level of the page table. - * Note that the hypervisor docs use PTE for what we call pte_t, so - * this nomenclature is somewhat confusing. - */ -#define PTRS_PER_PTE _HV_L2_ENTRIES(HPAGE_SHIFT, PAGE_SHIFT) -#define PTE_INDEX(va) _HV_L2_INDEX(va, HPAGE_SHIFT, PAGE_SHIFT) -#define SIZEOF_PTE _HV_L2_SIZE(HPAGE_SHIFT, PAGE_SHIFT) - -#ifndef __ASSEMBLY__ - -/* - * Right now we initialize only a single pte table. It can be extended - * easily, subsequent pte tables have to be allocated in one physical - * chunk of RAM. - * - * HOWEVER, if we are using an allocation scheme with slop after the - * end of the page table (e.g. where our L2 page tables are 2KB but - * our pages are 64KB and we are allocating via the page allocator) - * we can't extend it easily. - */ -#define LAST_PKMAP PTRS_PER_PTE - -#define PKMAP_BASE ((FIXADDR_BOOT_START - PAGE_SIZE*LAST_PKMAP) & PGDIR_MASK) - -#ifdef CONFIG_HIGHMEM -# define _VMALLOC_END (PKMAP_BASE & ~(HPAGE_SIZE-1)) -#else -# define _VMALLOC_END (FIXADDR_START & ~(HPAGE_SIZE-1)) -#endif - -/* - * Align the vmalloc area to an L2 page table, and leave a guard page - * at the beginning and end. The vmalloc code also puts in an internal - * guard page between each allocation. - */ -#define VMALLOC_END (_VMALLOC_END - PAGE_SIZE) -extern unsigned long VMALLOC_RESERVE /* = CONFIG_VMALLOC_RESERVE */; -#define _VMALLOC_START (_VMALLOC_END - VMALLOC_RESERVE) -#define VMALLOC_START (_VMALLOC_START + PAGE_SIZE) - -/* This is the maximum possible amount of lowmem. */ -#define MAXMEM (_VMALLOC_START - PAGE_OFFSET) - -/* We have no pmd or pud since we are strictly a two-level page table */ -#define __ARCH_USE_5LEVEL_HACK -#include <asm-generic/pgtable-nopmd.h> - -static inline int pud_huge_page(pud_t pud) { return 0; } - -/* We don't define any pgds for these addresses. */ -static inline int pgd_addr_invalid(unsigned long addr) -{ - return addr >= MEM_HV_START; -} - -/* - * Provide versions of these routines that can be used safely when - * the hypervisor may be asynchronously modifying dirty/accessed bits. - * ptep_get_and_clear() matches the generic one but we provide it to - * be parallel with the 64-bit code. - */ -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG -#define __HAVE_ARCH_PTEP_SET_WRPROTECT - -extern int ptep_test_and_clear_young(struct vm_area_struct *, - unsigned long addr, pte_t *); -extern void ptep_set_wrprotect(struct mm_struct *, - unsigned long addr, pte_t *); - -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -static inline pte_t ptep_get_and_clear(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - pte_t pte = *ptep; - pte_clear(_mm, addr, ptep); - return pte; -} - -/* - * pmds are wrappers around pgds, which are the same as ptes. - * It's often convenient to "cast" back and forth and use the pte methods, - * which are the methods supplied by the hypervisor. - */ -#define pmd_pte(pmd) ((pmd).pud.pgd) -#define pmdp_ptep(pmdp) (&(pmdp)->pud.pgd) -#define pte_pmd(pte) ((pmd_t){ { (pte) } }) - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_TILE_PGTABLE_32_H */ diff --git a/arch/tile/include/asm/pgtable_64.h b/arch/tile/include/asm/pgtable_64.h deleted file mode 100644 index 96fe58b45118..000000000000 --- a/arch/tile/include/asm/pgtable_64.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - */ - -#ifndef _ASM_TILE_PGTABLE_64_H -#define _ASM_TILE_PGTABLE_64_H - -/* The level-0 page table breaks the address space into 32-bit chunks. */ -#define PGDIR_SHIFT HV_LOG2_L1_SPAN -#define PGDIR_SIZE HV_L1_SPAN -#define PGDIR_MASK (~(PGDIR_SIZE-1)) -#define PTRS_PER_PGD HV_L0_ENTRIES -#define PGD_INDEX(va) HV_L0_INDEX(va) -#define SIZEOF_PGD HV_L0_SIZE - -/* - * The level-1 index is defined by the huge page size. A PMD is composed - * of PTRS_PER_PMD pgd_t's and is the middle level of the page table. - */ -#define PMD_SHIFT HPAGE_SHIFT -#define PMD_SIZE HPAGE_SIZE -#define PMD_MASK (~(PMD_SIZE-1)) -#define PTRS_PER_PMD _HV_L1_ENTRIES(HPAGE_SHIFT) -#define PMD_INDEX(va) _HV_L1_INDEX(va, HPAGE_SHIFT) -#define SIZEOF_PMD _HV_L1_SIZE(HPAGE_SHIFT) - -/* - * The level-2 index is defined by the difference between the huge - * page size and the normal page size. A PTE is composed of - * PTRS_PER_PTE pte_t's and is the bottom level of the page table. - * Note that the hypervisor docs use PTE for what we call pte_t, so - * this nomenclature is somewhat confusing. - */ -#define PTRS_PER_PTE _HV_L2_ENTRIES(HPAGE_SHIFT, PAGE_SHIFT) -#define PTE_INDEX(va) _HV_L2_INDEX(va, HPAGE_SHIFT, PAGE_SHIFT) -#define SIZEOF_PTE _HV_L2_SIZE(HPAGE_SHIFT, PAGE_SHIFT) - -/* - * Align the vmalloc area to an L2 page table. Omit guard pages at - * the beginning and end for simplicity (particularly in the per-cpu - * memory allocation code). The vmalloc code puts in an internal - * guard page between each allocation. - */ -#define _VMALLOC_END MEM_SV_START -#define VMALLOC_END _VMALLOC_END -#define VMALLOC_START _VMALLOC_START - -#ifndef __ASSEMBLY__ - -/* We have no pud since we are a three-level page table. */ -#define __ARCH_USE_5LEVEL_HACK -#include <asm-generic/pgtable-nopud.h> - -/* - * pmds are the same as pgds and ptes, so converting is a no-op. - */ -#define pmd_pte(pmd) (pmd) -#define pmdp_ptep(pmdp) (pmdp) -#define pte_pmd(pte) (pte) - -#define pud_pte(pud) ((pud).pgd) - -static inline int pud_none(pud_t pud) -{ - return pud_val(pud) == 0; -} - -static inline int pud_present(pud_t pud) -{ - return pud_val(pud) & _PAGE_PRESENT; -} - -static inline int pud_huge_page(pud_t pud) -{ - return pud_val(pud) & _PAGE_HUGE_PAGE; -} - -#define pmd_ERROR(e) \ - pr_err("%s:%d: bad pmd 0x%016llx\n", __FILE__, __LINE__, pmd_val(e)) - -static inline void pud_clear(pud_t *pudp) -{ - __pte_clear(&pudp->pgd); -} - -static inline int pud_bad(pud_t pud) -{ - return ((pud_val(pud) & _PAGE_ALL) != _PAGE_TABLE); -} - -/* Return the page-table frame number (ptfn) that a pud_t points at. */ -#define pud_ptfn(pud) hv_pte_get_ptfn((pud).pgd) - -/* Return the page frame number (pfn) that a pud_t points at. */ -#define pud_pfn(pud) pte_pfn(pud_pte(pud)) - -/* - * A given kernel pud_t maps to a kernel pmd_t table at a specific - * virtual address. Since kernel pmd_t tables can be aligned at - * sub-page granularity, this macro can return non-page-aligned - * pointers, despite its name. - */ -#define pud_page_vaddr(pud) \ - (__va((phys_addr_t)pud_ptfn(pud) << HV_LOG2_PAGE_TABLE_ALIGN)) - -/* - * A pud_t points to a pmd_t array. Since we can have multiple per - * page, we don't have a one-to-one mapping of pud_t's to pages. - */ -#define pud_page(pud) pfn_to_page(PFN_DOWN(HV_PTFN_TO_CPA(pud_ptfn(pud)))) - -static inline unsigned long pud_index(unsigned long address) -{ - return (address >> PUD_SHIFT) & (PTRS_PER_PUD - 1); -} - -#define pmd_offset(pud, address) \ - ((pmd_t *)pud_page_vaddr(*(pud)) + pmd_index(address)) - -/* Normalize an address to having the correct high bits set. */ -#define pgd_addr_normalize pgd_addr_normalize -static inline unsigned long pgd_addr_normalize(unsigned long addr) -{ - return ((long)addr << (CHIP_WORD_SIZE() - CHIP_VA_WIDTH())) >> - (CHIP_WORD_SIZE() - CHIP_VA_WIDTH()); -} - -/* We don't define any pgds for these addresses. */ -static inline int pgd_addr_invalid(unsigned long addr) -{ - return addr >= KERNEL_HIGH_VADDR || addr != pgd_addr_normalize(addr); -} - -/* - * Use atomic instructions to provide atomicity against the hypervisor. - */ -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG -static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep) -{ - return (__insn_fetchand(&ptep->val, ~HV_PTE_ACCESSED) >> - HV_PTE_INDEX_ACCESSED) & 0x1; -} - -#define __HAVE_ARCH_PTEP_SET_WRPROTECT -static inline void ptep_set_wrprotect(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - __insn_fetchand(&ptep->val, ~HV_PTE_WRITABLE); -} - -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -static inline pte_t ptep_get_and_clear(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - return hv_pte(__insn_exch(&ptep->val, 0UL)); -} - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_TILE_PGTABLE_64_H */ diff --git a/arch/tile/include/asm/pmc.h b/arch/tile/include/asm/pmc.h deleted file mode 100644 index 7ae3956d9008..000000000000 --- a/arch/tile/include/asm/pmc.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright 2014 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_PMC_H -#define _ASM_TILE_PMC_H - -#include <linux/ptrace.h> - -#define TILE_BASE_COUNTERS 2 - -/* Bitfields below are derived from SPR PERF_COUNT_CTL*/ -#ifndef __tilegx__ -/* PERF_COUNT_CTL on TILEPro */ -#define TILE_CTL_EXCL_USER (1 << 7) /* exclude user level */ -#define TILE_CTL_EXCL_KERNEL (1 << 8) /* exclude kernel level */ -#define TILE_CTL_EXCL_HV (1 << 9) /* exclude hypervisor level */ - -#define TILE_SEL_MASK 0x7f /* 7 bits for event SEL, - COUNT_0_SEL */ -#define TILE_PLM_MASK 0x780 /* 4 bits priv level msks, - COUNT_0_MASK*/ -#define TILE_EVENT_MASK (TILE_SEL_MASK | TILE_PLM_MASK) - -#else /* __tilegx__*/ -/* PERF_COUNT_CTL on TILEGx*/ -#define TILE_CTL_EXCL_USER (1 << 10) /* exclude user level */ -#define TILE_CTL_EXCL_KERNEL (1 << 11) /* exclude kernel level */ -#define TILE_CTL_EXCL_HV (1 << 12) /* exclude hypervisor level */ - -#define TILE_SEL_MASK 0x3f /* 6 bits for event SEL, - COUNT_0_SEL*/ -#define TILE_BOX_MASK 0x1c0 /* 3 bits box msks, - COUNT_0_BOX */ -#define TILE_PLM_MASK 0x3c00 /* 4 bits priv level msks, - COUNT_0_MASK */ -#define TILE_EVENT_MASK (TILE_SEL_MASK | TILE_BOX_MASK | TILE_PLM_MASK) -#endif /* __tilegx__*/ - -/* Takes register and fault number. Returns error to disable the interrupt. */ -typedef int (*perf_irq_t)(struct pt_regs *, int); - -int userspace_perf_handler(struct pt_regs *regs, int fault); - -perf_irq_t reserve_pmc_hardware(perf_irq_t new_perf_irq); -void release_pmc_hardware(void); - -unsigned long pmc_get_overflow(void); -void pmc_ack_overflow(unsigned long status); - -void unmask_pmc_interrupts(void); -void mask_pmc_interrupts(void); - -#endif /* _ASM_TILE_PMC_H */ diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h deleted file mode 100644 index f71e5206650b..000000000000 --- a/arch/tile/include/asm/processor.h +++ /dev/null @@ -1,368 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_PROCESSOR_H -#define _ASM_TILE_PROCESSOR_H - -#include <arch/chip.h> - -#ifndef __ASSEMBLY__ - -/* - * NOTE: we don't include <linux/ptrace.h> or <linux/percpu.h> as one - * normally would, due to #include dependencies. - */ -#include <linux/types.h> -#include <asm/ptrace.h> -#include <asm/percpu.h> - -#include <arch/spr_def.h> - -struct task_struct; -struct thread_struct; - -typedef struct { - unsigned long seg; -} mm_segment_t; - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -void *current_text_addr(void); - -#if CHIP_HAS_TILE_DMA() -/* Capture the state of a suspended DMA. */ -struct tile_dma_state { - int enabled; - unsigned long src; - unsigned long dest; - unsigned long strides; - unsigned long chunk_size; - unsigned long src_chunk; - unsigned long dest_chunk; - unsigned long byte; - unsigned long status; -}; - -/* - * A mask of the DMA status register for selecting only the 'running' - * and 'done' bits. - */ -#define DMA_STATUS_MASK \ - (SPR_DMA_STATUS__RUNNING_MASK | SPR_DMA_STATUS__DONE_MASK) -#endif - -/* - * Track asynchronous TLB events (faults and access violations) - * that occur while we are in kernel mode from DMA or the SN processor. - */ -struct async_tlb { - short fault_num; /* original fault number; 0 if none */ - char is_fault; /* was it a fault (vs an access violation) */ - char is_write; /* for fault: was it caused by a write? */ - unsigned long address; /* what address faulted? */ -}; - -#ifdef CONFIG_HARDWALL -struct hardwall_info; -struct hardwall_task { - /* Which hardwall is this task tied to? (or NULL if none) */ - struct hardwall_info *info; - /* Chains this task into the list at info->task_head. */ - struct list_head list; -}; -#ifdef __tilepro__ -#define HARDWALL_TYPES 1 /* udn */ -#else -#define HARDWALL_TYPES 3 /* udn, idn, and ipi */ -#endif -#endif - -struct thread_struct { - /* kernel stack pointer */ - unsigned long ksp; - /* kernel PC */ - unsigned long pc; - /* starting user stack pointer (for page migration) */ - unsigned long usp0; - /* pid of process that created this one */ - pid_t creator_pid; -#if CHIP_HAS_TILE_DMA() - /* DMA info for suspended threads (byte == 0 means no DMA state) */ - struct tile_dma_state tile_dma_state; -#endif - /* User EX_CONTEXT registers */ - unsigned long ex_context[2]; - /* User SYSTEM_SAVE registers */ - unsigned long system_save[4]; - /* User interrupt mask */ - unsigned long long interrupt_mask; - /* User interrupt-control 0 state */ - unsigned long intctrl_0; - /* Any other miscellaneous processor state bits */ - unsigned long proc_status; -#if !CHIP_HAS_FIXED_INTVEC_BASE() - /* Interrupt base for PL0 interrupts */ - unsigned long interrupt_vector_base; -#endif - /* Tile cache retry fifo high-water mark */ - unsigned long tile_rtf_hwm; -#if CHIP_HAS_DSTREAM_PF() - /* Data stream prefetch control */ - unsigned long dstream_pf; -#endif -#ifdef CONFIG_HARDWALL - /* Hardwall information for various resources. */ - struct hardwall_task hardwall[HARDWALL_TYPES]; -#endif -#if CHIP_HAS_TILE_DMA() - /* Async DMA TLB fault information */ - struct async_tlb dma_async_tlb; -#endif -}; - -#endif /* !__ASSEMBLY__ */ - -/* - * Start with "sp" this many bytes below the top of the kernel stack. - * This allows us to be cache-aware when handling the initial save - * of the pt_regs value to the stack. - */ -#define STACK_TOP_DELTA 64 - -/* - * When entering the kernel via a fault, start with the top of the - * pt_regs structure this many bytes below the top of the page. - * This aligns the pt_regs structure optimally for cache-line access. - */ -#ifdef __tilegx__ -#define KSTK_PTREGS_GAP 48 -#else -#define KSTK_PTREGS_GAP 56 -#endif - -#ifndef __ASSEMBLY__ - -#ifdef __tilegx__ -#define TASK_SIZE_MAX (_AC(1, UL) << (MAX_VA_WIDTH - 1)) -#else -#define TASK_SIZE_MAX PAGE_OFFSET -#endif - -/* TASK_SIZE and related variables are always checked in "current" context. */ -#ifdef CONFIG_COMPAT -#define COMPAT_TASK_SIZE (1UL << 31) -#define TASK_SIZE ((current_thread_info()->status & TS_COMPAT) ?\ - COMPAT_TASK_SIZE : TASK_SIZE_MAX) -#else -#define TASK_SIZE TASK_SIZE_MAX -#endif - -#define VDSO_BASE ((unsigned long)current->active_mm->context.vdso_base) -#define VDSO_SYM(x) (VDSO_BASE + (unsigned long)(x)) - -#define STACK_TOP TASK_SIZE - -/* STACK_TOP_MAX is used temporarily in execve and should not check COMPAT. */ -#define STACK_TOP_MAX TASK_SIZE_MAX - -/* - * This decides where the kernel will search for a free chunk of vm - * space during mmap's, if it is using bottom-up mapping. - */ -#define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE / 3)) - -#define HAVE_ARCH_PICK_MMAP_LAYOUT - -#define INIT_THREAD { \ - .ksp = (unsigned long)init_stack + THREAD_SIZE - STACK_TOP_DELTA, \ - .interrupt_mask = -1ULL \ -} - -/* Kernel stack top for the task that first boots on this cpu. */ -DECLARE_PER_CPU(unsigned long, boot_sp); - -/* PC to boot from on this cpu. */ -DECLARE_PER_CPU(unsigned long, boot_pc); - -/* Do necessary setup to start up a newly executed thread. */ -static inline void start_thread(struct pt_regs *regs, - unsigned long pc, unsigned long usp) -{ - regs->pc = pc; - regs->sp = usp; - single_step_execve(); -} - -/* Free all resources held by a thread. */ -static inline void release_thread(struct task_struct *dead_task) -{ - /* Nothing for now */ -} - -extern void prepare_exit_to_usermode(struct pt_regs *regs, u32 flags); - -unsigned long get_wchan(struct task_struct *p); - -/* Return initial ksp value for given task. */ -#define task_ksp0(task) \ - ((unsigned long)(task)->stack + THREAD_SIZE - STACK_TOP_DELTA) - -/* Return some info about the user process TASK. */ -#define task_pt_regs(task) \ - ((struct pt_regs *)(task_ksp0(task) - KSTK_PTREGS_GAP) - 1) -#define current_pt_regs() \ - ((struct pt_regs *)((stack_pointer | (THREAD_SIZE - 1)) - \ - STACK_TOP_DELTA - (KSTK_PTREGS_GAP - 1)) - 1) -#define task_sp(task) (task_pt_regs(task)->sp) -#define task_pc(task) (task_pt_regs(task)->pc) -/* Aliases for pc and sp (used in fs/proc/array.c) */ -#define KSTK_EIP(task) task_pc(task) -#define KSTK_ESP(task) task_sp(task) - -/* Fine-grained unaligned JIT support */ -#define GET_UNALIGN_CTL(tsk, adr) get_unalign_ctl((tsk), (adr)) -#define SET_UNALIGN_CTL(tsk, val) set_unalign_ctl((tsk), (val)) - -extern int get_unalign_ctl(struct task_struct *tsk, unsigned long adr); -extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val); - -/* Standard format for printing registers and other word-size data. */ -#ifdef __tilegx__ -# define REGFMT "0x%016lx" -#else -# define REGFMT "0x%08lx" -#endif - -/* - * Do some slow action (e.g. read a slow SPR). - * Note that this must also have compiler-barrier semantics since - * it may be used in a busy loop reading memory. - */ -static inline void cpu_relax(void) -{ - __insn_mfspr(SPR_PASS); - barrier(); -} - -/* Info on this processor (see fs/proc/cpuinfo.c) */ -struct seq_operations; -extern const struct seq_operations cpuinfo_op; - -/* Provide information about the chip model. */ -extern char chip_model[64]; - -/* Data on which physical memory controller corresponds to which NUMA node. */ -extern int node_controller[]; - -/* Does the heap allocator return hash-for-home pages by default? */ -extern int hash_default; - -/* Should kernel stack pages be hash-for-home? */ -extern int kstack_hash; - -/* Does MAP_ANONYMOUS return hash-for-home pages by default? */ -#define uheap_hash hash_default - - -/* Are we using huge pages in the TLB for kernel data? */ -extern int kdata_huge; - -/* Support standard Linux prefetching. */ -#define ARCH_HAS_PREFETCH -#define prefetch(x) __builtin_prefetch(x) -#define PREFETCH_STRIDE CHIP_L2_LINE_SIZE() - -/* Bring a value into the L1D, faulting the TLB if necessary. */ -#ifdef __tilegx__ -#define prefetch_L1(x) __insn_prefetch_l1_fault((void *)(x)) -#else -#define prefetch_L1(x) __insn_prefetch_L1((void *)(x)) -#endif - -#else /* __ASSEMBLY__ */ - -/* Do some slow action (e.g. read a slow SPR). */ -#define CPU_RELAX mfspr zero, SPR_PASS - -#endif /* !__ASSEMBLY__ */ - -/* Assembly code assumes that the PL is in the low bits. */ -#if SPR_EX_CONTEXT_1_1__PL_SHIFT != 0 -# error Fix assembly assumptions about PL -#endif - -/* We sometimes use these macros for EX_CONTEXT_0_1 as well. */ -#if SPR_EX_CONTEXT_1_1__PL_SHIFT != SPR_EX_CONTEXT_0_1__PL_SHIFT || \ - SPR_EX_CONTEXT_1_1__PL_RMASK != SPR_EX_CONTEXT_0_1__PL_RMASK || \ - SPR_EX_CONTEXT_1_1__ICS_SHIFT != SPR_EX_CONTEXT_0_1__ICS_SHIFT || \ - SPR_EX_CONTEXT_1_1__ICS_RMASK != SPR_EX_CONTEXT_0_1__ICS_RMASK -# error Fix assumptions that EX1 macros work for both PL0 and PL1 -#endif - -/* Allow pulling apart and recombining the PL and ICS bits in EX_CONTEXT. */ -#define EX1_PL(ex1) \ - (((ex1) >> SPR_EX_CONTEXT_1_1__PL_SHIFT) & SPR_EX_CONTEXT_1_1__PL_RMASK) -#define EX1_ICS(ex1) \ - (((ex1) >> SPR_EX_CONTEXT_1_1__ICS_SHIFT) & SPR_EX_CONTEXT_1_1__ICS_RMASK) -#define PL_ICS_EX1(pl, ics) \ - (((pl) << SPR_EX_CONTEXT_1_1__PL_SHIFT) | \ - ((ics) << SPR_EX_CONTEXT_1_1__ICS_SHIFT)) - -/* - * Provide symbolic constants for PLs. - */ -#define USER_PL 0 -#if CONFIG_KERNEL_PL == 2 -#define GUEST_PL 1 -#endif -#define KERNEL_PL CONFIG_KERNEL_PL - -/* SYSTEM_SAVE_K_0 holds the current cpu number ORed with ksp0. */ -#ifdef __tilegx__ -#define CPU_SHIFT 48 -#if CHIP_VA_WIDTH() > CPU_SHIFT -# error Too many VA bits! -#endif -#define MAX_CPU_ID ((1 << (64 - CPU_SHIFT)) - 1) -#define raw_smp_processor_id() \ - ((int)(__insn_mfspr(SPR_SYSTEM_SAVE_K_0) >> CPU_SHIFT)) -#define get_current_ksp0() \ - ((unsigned long)(((long)__insn_mfspr(SPR_SYSTEM_SAVE_K_0) << \ - (64 - CPU_SHIFT)) >> (64 - CPU_SHIFT))) -#define next_current_ksp0(task) ({ \ - unsigned long __ksp0 = task_ksp0(task) & ((1UL << CPU_SHIFT) - 1); \ - unsigned long __cpu = (long)raw_smp_processor_id() << CPU_SHIFT; \ - __ksp0 | __cpu; \ -}) -#else -#define LOG2_NR_CPU_IDS 6 -#define MAX_CPU_ID ((1 << LOG2_NR_CPU_IDS) - 1) -#define raw_smp_processor_id() \ - ((int)__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & MAX_CPU_ID) -#define get_current_ksp0() \ - (__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & ~MAX_CPU_ID) -#define next_current_ksp0(task) ({ \ - unsigned long __ksp0 = task_ksp0(task); \ - int __cpu = raw_smp_processor_id(); \ - BUG_ON(__ksp0 & MAX_CPU_ID); \ - __ksp0 | __cpu; \ -}) -#endif -#if CONFIG_NR_CPUS > (MAX_CPU_ID + 1) -# error Too many cpus! -#endif - -#endif /* _ASM_TILE_PROCESSOR_H */ diff --git a/arch/tile/include/asm/ptrace.h b/arch/tile/include/asm/ptrace.h deleted file mode 100644 index b9620c077abc..000000000000 --- a/arch/tile/include/asm/ptrace.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ -#ifndef _ASM_TILE_PTRACE_H -#define _ASM_TILE_PTRACE_H - -#include <linux/compiler.h> - -#ifndef __ASSEMBLY__ -/* Benefit from consistent use of "long" on all chips. */ -typedef unsigned long pt_reg_t; -#endif - -#include <uapi/asm/ptrace.h> - -#define PTRACE_O_MASK_TILE (PTRACE_O_TRACEMIGRATE) -#define PT_TRACE_MIGRATE PT_EVENT_FLAG(PTRACE_EVENT_MIGRATE) - -/* Flag bits in pt_regs.flags */ -#define PT_FLAGS_DISABLE_IRQ 1 /* on return to kernel, disable irqs */ -#define PT_FLAGS_CALLER_SAVES 2 /* caller-save registers are valid */ -#define PT_FLAGS_RESTORE_REGS 4 /* restore callee-save regs on return */ - -#ifndef __ASSEMBLY__ - -#define regs_return_value(regs) ((regs)->regs[0]) -#define instruction_pointer(regs) ((regs)->pc) -#define profile_pc(regs) instruction_pointer(regs) -#define user_stack_pointer(regs) ((regs)->sp) - -/* Does the process account for user or for system time? */ -#define user_mode(regs) (EX1_PL((regs)->ex1) < KERNEL_PL) - -/* Fill in a struct pt_regs with the current kernel registers. */ -struct pt_regs *get_pt_regs(struct pt_regs *); - -/* Trace the current syscall. */ -extern int do_syscall_trace_enter(struct pt_regs *regs); -extern void do_syscall_trace_exit(struct pt_regs *regs); - -#define arch_has_single_step() (1) - -/* - * A structure for all single-stepper state. - * - * Also update defines in assembler section if it changes - */ -struct single_step_state { - /* the page to which we will write hacked-up bundles */ - void __user *buffer; - - union { - int flags; - struct { - unsigned long is_enabled:1, update:1, update_reg:6; - }; - }; - - unsigned long orig_pc; /* the original PC */ - unsigned long next_pc; /* return PC if no branch (PC + 1) */ - unsigned long branch_next_pc; /* return PC if we did branch/jump */ - unsigned long update_value; /* value to restore to update_target */ -}; - -/* Single-step the instruction at regs->pc */ -extern void single_step_once(struct pt_regs *regs); - -/* Clean up after execve(). */ -extern void single_step_execve(void); - -struct task_struct; - -extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs); - -#ifdef __tilegx__ -/* We need this since sigval_t has a user pointer in it, for GETSIGINFO etc. */ -#define __ARCH_WANT_COMPAT_SYS_PTRACE -#endif - -#endif /* !__ASSEMBLY__ */ - -#define SINGLESTEP_STATE_MASK_IS_ENABLED 0x1 -#define SINGLESTEP_STATE_MASK_UPDATE 0x2 -#define SINGLESTEP_STATE_TARGET_LB 2 -#define SINGLESTEP_STATE_TARGET_UB 7 - -#endif /* _ASM_TILE_PTRACE_H */ diff --git a/arch/tile/include/asm/sections.h b/arch/tile/include/asm/sections.h deleted file mode 100644 index 50343bfe7936..000000000000 --- a/arch/tile/include/asm/sections.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_SECTIONS_H -#define _ASM_TILE_SECTIONS_H - -#define arch_is_kernel_data arch_is_kernel_data - -#include <asm-generic/sections.h> - -extern char vdso_start[], vdso_end[]; -#ifdef CONFIG_COMPAT -extern char vdso32_start[], vdso32_end[]; -#endif - -/* Not exactly sections, but PC comparison points in the code. */ -extern char __rt_sigreturn[], __rt_sigreturn_end[]; -#ifdef __tilegx__ -extern char __start_unalign_asm_code[], __end_unalign_asm_code[]; -#else -extern char sys_cmpxchg[], __sys_cmpxchg_end[]; -extern char __sys_cmpxchg_grab_lock[]; -extern char __start_atomic_asm_code[], __end_atomic_asm_code[]; -#endif - -/* Handle the discontiguity between _sdata and _text. */ -static inline int arch_is_kernel_data(unsigned long addr) -{ - return addr >= (unsigned long)_sdata && - addr < (unsigned long)_end; -} - -#endif /* _ASM_TILE_SECTIONS_H */ diff --git a/arch/tile/include/asm/setup.h b/arch/tile/include/asm/setup.h deleted file mode 100644 index 2a0347af0702..000000000000 --- a/arch/tile/include/asm/setup.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ -#ifndef _ASM_TILE_SETUP_H -#define _ASM_TILE_SETUP_H - - -#include <linux/pfn.h> -#include <linux/init.h> -#include <uapi/asm/setup.h> - -/* - * Reserved space for vmalloc and iomap - defined in asm/page.h - */ -#define MAXMEM_PFN PFN_DOWN(MAXMEM) - -int tile_console_write(const char *buf, int count); - -#ifdef CONFIG_EARLY_PRINTK -void early_panic(const char *fmt, ...); -#else -#define early_panic panic -#endif - -/* Init-time routine to do tile-specific per-cpu setup. */ -void setup_cpu(int boot); - -/* User-level DMA management functions */ -void grant_dma_mpls(void); -void restrict_dma_mpls(void); - -#ifdef CONFIG_HARDWALL -/* User-level network management functions */ -void reset_network_state(void); -struct task_struct; -void hardwall_switch_tasks(struct task_struct *prev, struct task_struct *next); -void hardwall_deactivate_all(struct task_struct *task); -int hardwall_ipi_valid(int cpu); - -/* Hook hardwall code into changes in affinity. */ -#define arch_set_cpus_allowed(p, new_mask) do { \ - if (!cpumask_equal(&p->cpus_allowed, new_mask)) \ - hardwall_deactivate_all(p); \ -} while (0) -#endif - -#endif /* _ASM_TILE_SETUP_H */ diff --git a/arch/tile/include/asm/sigframe.h b/arch/tile/include/asm/sigframe.h deleted file mode 100644 index 994d3d30205f..000000000000 --- a/arch/tile/include/asm/sigframe.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_SIGFRAME_H -#define _ASM_TILE_SIGFRAME_H - -/* Indicate that syscall return should not examine r0 */ -#define INT_SWINT_1_SIGRETURN (~0) - -#ifndef __ASSEMBLY__ - -#include <arch/abi.h> - -struct rt_sigframe { - unsigned char save_area[C_ABI_SAVE_AREA_SIZE]; /* caller save area */ - struct siginfo info; - struct ucontext uc; -}; - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_TILE_SIGFRAME_H */ diff --git a/arch/tile/include/asm/signal.h b/arch/tile/include/asm/signal.h deleted file mode 100644 index 10e183de96d3..000000000000 --- a/arch/tile/include/asm/signal.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ -#ifndef _ASM_TILE_SIGNAL_H -#define _ASM_TILE_SIGNAL_H - -#include <uapi/asm/signal.h> - -#if !defined(__ASSEMBLY__) -struct pt_regs; -int restore_sigcontext(struct pt_regs *, struct sigcontext __user *); -int setup_sigcontext(struct sigcontext __user *, struct pt_regs *); -void do_signal(struct pt_regs *regs); -void signal_fault(const char *type, struct pt_regs *, - void __user *frame, int sig); -void trace_unhandled_signal(const char *type, struct pt_regs *regs, - unsigned long address, int signo); -#endif -#endif /* _ASM_TILE_SIGNAL_H */ diff --git a/arch/tile/include/asm/smp.h b/arch/tile/include/asm/smp.h deleted file mode 100644 index 735e7f144733..000000000000 --- a/arch/tile/include/asm/smp.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_SMP_H -#define _ASM_TILE_SMP_H - -#ifdef CONFIG_SMP - -#include <asm/processor.h> -#include <linux/cpumask.h> -#include <linux/irqreturn.h> -#include <hv/hypervisor.h> - -/* Set up this tile to support receiving hypervisor messages */ -void init_messaging(void); - -/* Set up this tile to support receiving device interrupts and IPIs. */ -void init_per_tile_IRQs(void); - -/* Send a message to processors specified in mask */ -void send_IPI_many(const struct cpumask *mask, int tag); - -/* Send a message to all but the sending processor */ -void send_IPI_allbutself(int tag); - -/* Send a message to a specific processor */ -void send_IPI_single(int dest, int tag); - -/* Process an IPI message */ -void evaluate_message(int tag); - -/* Boot a secondary cpu */ -void online_secondary(void); - -/* Topology of the supervisor tile grid, and coordinates of boot processor */ -extern HV_Topology smp_topology; - -/* Accessors for grid size */ -#define smp_height (smp_topology.height) -#define smp_width (smp_topology.width) - -/* Convenience functions for converting cpu <-> coords. */ -static inline int cpu_x(int cpu) -{ - return cpu % smp_width; -} -static inline int cpu_y(int cpu) -{ - return cpu / smp_width; -} -static inline int xy_to_cpu(int x, int y) -{ - return y * smp_width + x; -} - -/* Hypervisor message tags sent via the tile send_IPI*() routines. */ -#define MSG_TAG_START_CPU 1 -#define MSG_TAG_STOP_CPU 2 -#define MSG_TAG_CALL_FUNCTION_MANY 3 -#define MSG_TAG_CALL_FUNCTION_SINGLE 4 -#define MSG_TAG_IRQ_WORK 5 - -/* Hook for the generic smp_call_function_many() routine. */ -static inline void arch_send_call_function_ipi_mask(struct cpumask *mask) -{ - send_IPI_many(mask, MSG_TAG_CALL_FUNCTION_MANY); -} - -/* Hook for the generic smp_call_function_single() routine. */ -static inline void arch_send_call_function_single_ipi(int cpu) -{ - send_IPI_single(cpu, MSG_TAG_CALL_FUNCTION_SINGLE); -} - -/* Print out the boot string describing which cpus were disabled. */ -void print_disabled_cpus(void); - -#else /* !CONFIG_SMP */ - -#define smp_master_cpu 0 -#define smp_height 1 -#define smp_width 1 -#define cpu_x(cpu) 0 -#define cpu_y(cpu) 0 -#define xy_to_cpu(x, y) 0 - -#endif /* !CONFIG_SMP */ - - -/* Which cpus may be used as the lotar in a page table entry. */ -extern struct cpumask cpu_lotar_map; -#define cpu_is_valid_lotar(cpu) cpumask_test_cpu((cpu), &cpu_lotar_map) - -/* Which processors are used for hash-for-home mapping */ -extern struct cpumask hash_for_home_map; - -/* Which cpus can have their cache flushed by hv_flush_remote(). */ -extern struct cpumask cpu_cacheable_map; -#define cpu_cacheable(cpu) cpumask_test_cpu((cpu), &cpu_cacheable_map) - -/* Convert an HV_LOTAR value into a cpu. */ -static inline int hv_lotar_to_cpu(HV_LOTAR lotar) -{ - return HV_LOTAR_X(lotar) + (HV_LOTAR_Y(lotar) * smp_width); -} - -/* - * Extension of <linux/cpumask.h> functionality when you just want - * to express a mask or suppression or inclusion region without - * being too concerned about exactly which cpus are valid in that region. - */ -int bitmap_parselist_crop(const char *bp, unsigned long *maskp, int nmaskbits); - -#define cpulist_parse_crop(buf, dst) \ - __cpulist_parse_crop((buf), (dst), NR_CPUS) -static inline int __cpulist_parse_crop(const char *buf, struct cpumask *dstp, - int nbits) -{ - return bitmap_parselist_crop(buf, cpumask_bits(dstp), nbits); -} - -/* Initialize the IPI subsystem. */ -void ipi_init(void); - -/* Function for start-cpu message to cause us to jump to. */ -extern unsigned long start_cpu_function_addr; - -#endif /* _ASM_TILE_SMP_H */ diff --git a/arch/tile/include/asm/spinlock.h b/arch/tile/include/asm/spinlock.h deleted file mode 100644 index 1a8bd4740c28..000000000000 --- a/arch/tile/include/asm/spinlock.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_SPINLOCK_H -#define _ASM_TILE_SPINLOCK_H - -#ifdef __tilegx__ -#include <asm/spinlock_64.h> -#else -#include <asm/spinlock_32.h> -#endif - -#endif /* _ASM_TILE_SPINLOCK_H */ diff --git a/arch/tile/include/asm/spinlock_32.h b/arch/tile/include/asm/spinlock_32.h deleted file mode 100644 index fb5313d77315..000000000000 --- a/arch/tile/include/asm/spinlock_32.h +++ /dev/null @@ -1,109 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * 32-bit SMP spinlocks. - */ - -#ifndef _ASM_TILE_SPINLOCK_32_H -#define _ASM_TILE_SPINLOCK_32_H - -#include <linux/atomic.h> -#include <asm/page.h> -#include <linux/compiler.h> - -/* - * We only use even ticket numbers so the '1' inserted by a tns is - * an unambiguous "ticket is busy" flag. - */ -#define TICKET_QUANTUM 2 - - -/* - * SMP ticket spinlocks, allowing only a single CPU anywhere - * - * (the type definitions are in asm/spinlock_types.h) - */ -static inline int arch_spin_is_locked(arch_spinlock_t *lock) -{ - /* - * Note that even if a new ticket is in the process of being - * acquired, so lock->next_ticket is 1, it's still reasonable - * to claim the lock is held, since it will be momentarily - * if not already. There's no need to wait for a "valid" - * lock->next_ticket to become available. - * Use READ_ONCE() to ensure that calling this in a loop is OK. - */ - int curr = READ_ONCE(lock->current_ticket); - int next = READ_ONCE(lock->next_ticket); - - return next != curr; -} - -void arch_spin_lock(arch_spinlock_t *lock); - -int arch_spin_trylock(arch_spinlock_t *lock); - -static inline void arch_spin_unlock(arch_spinlock_t *lock) -{ - /* For efficiency, overlap fetching the old ticket with the wmb(). */ - int old_ticket = lock->current_ticket; - wmb(); /* guarantee anything modified under the lock is visible */ - lock->current_ticket = old_ticket + TICKET_QUANTUM; -} - -/* - * Read-write spinlocks, allowing multiple readers - * but only one writer. - * - * We use a "tns/store-back" technique on a single word to manage - * the lock state, looping around to retry if the tns returns 1. - */ - -/* Internal layout of the word; do not use. */ -#define _WR_NEXT_SHIFT 8 -#define _WR_CURR_SHIFT 16 -#define _WR_WIDTH 8 -#define _RD_COUNT_SHIFT 24 -#define _RD_COUNT_WIDTH 8 - -/** - * arch_read_lock() - acquire a read lock. - */ -void arch_read_lock(arch_rwlock_t *rwlock); - -/** - * arch_write_lock() - acquire a write lock. - */ -void arch_write_lock(arch_rwlock_t *rwlock); - -/** - * arch_read_trylock() - try to acquire a read lock. - */ -int arch_read_trylock(arch_rwlock_t *rwlock); - -/** - * arch_write_trylock() - try to acquire a write lock. - */ -int arch_write_trylock(arch_rwlock_t *rwlock); - -/** - * arch_read_unlock() - release a read lock. - */ -void arch_read_unlock(arch_rwlock_t *rwlock); - -/** - * arch_write_unlock() - release a write lock. - */ -void arch_write_unlock(arch_rwlock_t *rwlock); - -#endif /* _ASM_TILE_SPINLOCK_32_H */ diff --git a/arch/tile/include/asm/spinlock_64.h b/arch/tile/include/asm/spinlock_64.h deleted file mode 100644 index 5b616ef642a8..000000000000 --- a/arch/tile/include/asm/spinlock_64.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * 64-bit SMP ticket spinlocks, allowing only a single CPU anywhere - * (the type definitions are in asm/spinlock_types.h) - */ - -#ifndef _ASM_TILE_SPINLOCK_64_H -#define _ASM_TILE_SPINLOCK_64_H - -#include <linux/compiler.h> - -/* Shifts and masks for the various fields in "lock". */ -#define __ARCH_SPIN_CURRENT_SHIFT 17 -#define __ARCH_SPIN_NEXT_MASK 0x7fff -#define __ARCH_SPIN_NEXT_OVERFLOW 0x8000 - -/* - * Return the "current" portion of a ticket lock value, - * i.e. the number that currently owns the lock. - */ -static inline u32 arch_spin_current(u32 val) -{ - return val >> __ARCH_SPIN_CURRENT_SHIFT; -} - -/* - * Return the "next" portion of a ticket lock value, - * i.e. the number that the next task to try to acquire the lock will get. - */ -static inline u32 arch_spin_next(u32 val) -{ - return val & __ARCH_SPIN_NEXT_MASK; -} - -/* The lock is locked if a task would have to wait to get it. */ -static inline int arch_spin_is_locked(arch_spinlock_t *lock) -{ - /* Use READ_ONCE() to ensure that calling this in a loop is OK. */ - u32 val = READ_ONCE(lock->lock); - return arch_spin_current(val) != arch_spin_next(val); -} - -/* Bump the current ticket so the next task owns the lock. */ -static inline void arch_spin_unlock(arch_spinlock_t *lock) -{ - wmb(); /* guarantee anything modified under the lock is visible */ - __insn_fetchadd4(&lock->lock, 1U << __ARCH_SPIN_CURRENT_SHIFT); -} - -void arch_spin_lock_slow(arch_spinlock_t *lock, u32 val); - -/* Grab the "next" ticket number and bump it atomically. - * If the current ticket is not ours, go to the slow path. - * We also take the slow path if the "next" value overflows. - */ -static inline void arch_spin_lock(arch_spinlock_t *lock) -{ - u32 val = __insn_fetchadd4(&lock->lock, 1); - u32 ticket = val & (__ARCH_SPIN_NEXT_MASK | __ARCH_SPIN_NEXT_OVERFLOW); - if (unlikely(arch_spin_current(val) != ticket)) - arch_spin_lock_slow(lock, ticket); -} - -/* Try to get the lock, and return whether we succeeded. */ -int arch_spin_trylock(arch_spinlock_t *lock); - -/* - * Read-write spinlocks, allowing multiple readers - * but only one writer. - * - * We use fetchadd() for readers, and fetchor() with the sign bit - * for writers. - */ - -#define __WRITE_LOCK_BIT (1 << 31) - -static inline int arch_write_val_locked(int val) -{ - return val < 0; /* Optimize "val & __WRITE_LOCK_BIT". */ -} - -extern void __read_lock_failed(arch_rwlock_t *rw); - -static inline void arch_read_lock(arch_rwlock_t *rw) -{ - u32 val = __insn_fetchaddgez4(&rw->lock, 1); - if (unlikely(arch_write_val_locked(val))) - __read_lock_failed(rw); -} - -extern void __write_lock_failed(arch_rwlock_t *rw, u32 val); - -static inline void arch_write_lock(arch_rwlock_t *rw) -{ - u32 val = __insn_fetchor4(&rw->lock, __WRITE_LOCK_BIT); - if (unlikely(val != 0)) - __write_lock_failed(rw, val); -} - -static inline void arch_read_unlock(arch_rwlock_t *rw) -{ - __insn_mf(); - __insn_fetchadd4(&rw->lock, -1); -} - -static inline void arch_write_unlock(arch_rwlock_t *rw) -{ - __insn_mf(); - __insn_exch4(&rw->lock, 0); /* Avoid waiting in the write buffer. */ -} - -static inline int arch_read_trylock(arch_rwlock_t *rw) -{ - return !arch_write_val_locked(__insn_fetchaddgez4(&rw->lock, 1)); -} - -static inline int arch_write_trylock(arch_rwlock_t *rw) -{ - u32 val = __insn_fetchor4(&rw->lock, __WRITE_LOCK_BIT); - if (likely(val == 0)) - return 1; - if (!arch_write_val_locked(val)) - __insn_fetchand4(&rw->lock, ~__WRITE_LOCK_BIT); - return 0; -} - -#endif /* _ASM_TILE_SPINLOCK_64_H */ diff --git a/arch/tile/include/asm/spinlock_types.h b/arch/tile/include/asm/spinlock_types.h deleted file mode 100644 index a71f59b49c50..000000000000 --- a/arch/tile/include/asm/spinlock_types.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_SPINLOCK_TYPES_H -#define _ASM_TILE_SPINLOCK_TYPES_H - -#ifndef __LINUX_SPINLOCK_TYPES_H -# error "please don't include this file directly" -#endif - -#ifdef __tilegx__ - -/* Low 15 bits are "next"; high 15 bits are "current". */ -typedef struct arch_spinlock { - unsigned int lock; -} arch_spinlock_t; - -#define __ARCH_SPIN_LOCK_UNLOCKED { 0 } - -/* High bit is "writer owns"; low 31 bits are a count of readers. */ -typedef struct arch_rwlock { - unsigned int lock; -} arch_rwlock_t; - -#define __ARCH_RW_LOCK_UNLOCKED { 0 } - -#else - -typedef struct arch_spinlock { - /* Next ticket number to hand out. */ - int next_ticket; - /* The ticket number that currently owns this lock. */ - int current_ticket; -} arch_spinlock_t; - -#define __ARCH_SPIN_LOCK_UNLOCKED { 0, 0 } - -/* - * Byte 0 for tns (only the low bit is used), byte 1 for ticket-lock "next", - * byte 2 for ticket-lock "current", byte 3 for reader count. - */ -typedef struct arch_rwlock { - unsigned int lock; -} arch_rwlock_t; - -#define __ARCH_RW_LOCK_UNLOCKED { 0 } - -#endif -#endif /* _ASM_TILE_SPINLOCK_TYPES_H */ diff --git a/arch/tile/include/asm/stack.h b/arch/tile/include/asm/stack.h deleted file mode 100644 index 3573325e340b..000000000000 --- a/arch/tile/include/asm/stack.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_STACK_H -#define _ASM_TILE_STACK_H - -#include <linux/types.h> -#include <linux/sched.h> -#include <linux/sched/debug.h> - -#include <asm/backtrace.h> -#include <asm/page.h> -#include <hv/hypervisor.h> - -/* Everything we need to keep track of a backtrace iteration */ -struct KBacktraceIterator { - BacktraceIterator it; - struct task_struct *task; /* task we are backtracing */ - int end; /* iteration complete. */ - int new_context; /* new context is starting */ - int profile; /* profiling, so stop on async intrpt */ - int verbose; /* printk extra info (don't want to - * do this for profiling) */ - int is_current; /* backtracing current task */ -}; - -/* Iteration methods for kernel backtraces */ - -/* - * Initialize a KBacktraceIterator from a task_struct, and optionally from - * a set of registers. If the registers are omitted, the process is - * assumed to be descheduled, and registers are read from the process's - * thread_struct and stack. "verbose" means to printk some additional - * information about fault handlers as we pass them on the stack. - */ -extern void KBacktraceIterator_init(struct KBacktraceIterator *kbt, - struct task_struct *, struct pt_regs *); - -/* Initialize iterator based on current stack. */ -extern void KBacktraceIterator_init_current(struct KBacktraceIterator *kbt); - -/* Helper method for above. */ -extern void _KBacktraceIterator_init_current(struct KBacktraceIterator *kbt, - ulong pc, ulong lr, ulong sp, ulong r52); - -/* No more frames? */ -extern int KBacktraceIterator_end(struct KBacktraceIterator *kbt); - -/* Advance to the next frame. */ -extern void KBacktraceIterator_next(struct KBacktraceIterator *kbt); - -/* Dump just the contents of the pt_regs structure. */ -extern void tile_show_regs(struct pt_regs *); - -/* - * Dump stack given complete register info. Use only from the - * architecture-specific code; show_stack() - * and dump_stack() are architecture-independent entry points. - */ -extern void tile_show_stack(struct KBacktraceIterator *); - -#endif /* _ASM_TILE_STACK_H */ diff --git a/arch/tile/include/asm/string.h b/arch/tile/include/asm/string.h deleted file mode 100644 index 92b271bd9ebd..000000000000 --- a/arch/tile/include/asm/string.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_STRING_H -#define _ASM_TILE_STRING_H - -#define __HAVE_ARCH_MEMCHR -#define __HAVE_ARCH_MEMSET -#define __HAVE_ARCH_MEMCPY -#define __HAVE_ARCH_MEMMOVE -#define __HAVE_ARCH_STRCHR -#define __HAVE_ARCH_STRLEN -#define __HAVE_ARCH_STRNLEN - -extern __kernel_size_t strlen(const char *); -extern __kernel_size_t strnlen(const char *, __kernel_size_t); -extern char *strchr(const char *s, int c); -extern void *memchr(const void *s, int c, size_t n); -extern void *memset(void *, int, __kernel_size_t); -extern void *memcpy(void *, const void *, __kernel_size_t); -extern void *memmove(void *, const void *, __kernel_size_t); - -#endif /* _ASM_TILE_STRING_H */ diff --git a/arch/tile/include/asm/switch_to.h b/arch/tile/include/asm/switch_to.h deleted file mode 100644 index 34ee72705521..000000000000 --- a/arch/tile/include/asm/switch_to.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_SWITCH_TO_H -#define _ASM_TILE_SWITCH_TO_H - -#include <arch/sim_def.h> - -/* - * switch_to(n) should switch tasks to task nr n, first - * checking that n isn't the current task, in which case it does nothing. - * The number of callee-saved registers saved on the kernel stack - * is defined here for use in copy_thread() and must agree with __switch_to(). - */ -#define CALLEE_SAVED_FIRST_REG 30 -#define CALLEE_SAVED_REGS_COUNT 24 /* r30 to r52, plus an empty to align */ - -#ifndef __ASSEMBLY__ - -struct task_struct; - -/* - * Pause the DMA engine and static network before task switching. - */ -#define prepare_arch_switch(next) _prepare_arch_switch(next) -void _prepare_arch_switch(struct task_struct *next); - -struct task_struct; -#define switch_to(prev, next, last) ((last) = _switch_to((prev), (next))) -extern struct task_struct *_switch_to(struct task_struct *prev, - struct task_struct *next); - -/* Helper function for _switch_to(). */ -extern struct task_struct *__switch_to(struct task_struct *prev, - struct task_struct *next, - unsigned long new_system_save_k_0); - -/* Address that switched-away from tasks are at. */ -extern unsigned long get_switch_to_pc(void); - -/* - * Kernel threads can check to see if they need to migrate their - * stack whenever they return from a context switch; for user - * threads, we defer until they are returning to user-space. - * We defer homecache migration until the runqueue lock is released. - */ -#define finish_arch_post_lock_switch() do { \ - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_SWITCH | \ - (current->pid << _SIM_CONTROL_OPERATOR_BITS)); \ - if (current->mm == NULL && !kstack_hash && \ - current_thread_info()->homecache_cpu != raw_smp_processor_id()) \ - homecache_migrate_kthread(); \ -} while (0) - -/* Support function for forking a new task. */ -void ret_from_fork(void); - -/* Support function for forking a new kernel thread. */ -void ret_from_kernel_thread(void *fn, void *arg); - -/* Called from ret_from_xxx() when a new process starts up. */ -struct task_struct *sim_notify_fork(struct task_struct *prev); - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_TILE_SWITCH_TO_H */ diff --git a/arch/tile/include/asm/syscall.h b/arch/tile/include/asm/syscall.h deleted file mode 100644 index 373d73064ea1..000000000000 --- a/arch/tile/include/asm/syscall.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * Copyright (C) 2008-2009 Red Hat, Inc. All rights reserved. - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * See asm-generic/syscall.h for descriptions of what we must do here. - */ - -#ifndef _ASM_TILE_SYSCALL_H -#define _ASM_TILE_SYSCALL_H - -#include <linux/sched.h> -#include <linux/err.h> -#include <linux/audit.h> -#include <linux/compat.h> -#include <arch/abi.h> - -/* The array of function pointers for syscalls. */ -extern void *sys_call_table[]; -#ifdef CONFIG_COMPAT -extern void *compat_sys_call_table[]; -#endif - -/* - * Only the low 32 bits of orig_r0 are meaningful, so we return int. - * This importantly ignores the high bits on 64-bit, so comparisons - * sign-extend the low 32 bits. - */ -static inline int syscall_get_nr(struct task_struct *t, struct pt_regs *regs) -{ - return regs->regs[TREG_SYSCALL_NR]; -} - -static inline void syscall_rollback(struct task_struct *task, - struct pt_regs *regs) -{ - regs->regs[0] = regs->orig_r0; -} - -static inline long syscall_get_error(struct task_struct *task, - struct pt_regs *regs) -{ - unsigned long error = regs->regs[0]; - return IS_ERR_VALUE(error) ? error : 0; -} - -static inline long syscall_get_return_value(struct task_struct *task, - struct pt_regs *regs) -{ - return regs->regs[0]; -} - -static inline void syscall_set_return_value(struct task_struct *task, - struct pt_regs *regs, - int error, long val) -{ - if (error) { - /* R0 is the passed-in negative error, R1 is positive. */ - regs->regs[0] = error; - regs->regs[1] = -error; - } else { - /* R1 set to zero to indicate no error. */ - regs->regs[0] = val; - regs->regs[1] = 0; - } -} - -static inline void syscall_get_arguments(struct task_struct *task, - struct pt_regs *regs, - unsigned int i, unsigned int n, - unsigned long *args) -{ - BUG_ON(i + n > 6); - memcpy(args, ®s[i], n * sizeof(args[0])); -} - -static inline void syscall_set_arguments(struct task_struct *task, - struct pt_regs *regs, - unsigned int i, unsigned int n, - const unsigned long *args) -{ - BUG_ON(i + n > 6); - memcpy(®s[i], args, n * sizeof(args[0])); -} - -/* - * We don't care about endianness (__AUDIT_ARCH_LE bit) here because - * tile has the same system calls both on little- and big- endian. - */ -static inline int syscall_get_arch(void) -{ - if (is_compat_task()) - return AUDIT_ARCH_TILEGX32; - -#ifdef CONFIG_TILEGX - return AUDIT_ARCH_TILEGX; -#else - return AUDIT_ARCH_TILEPRO; -#endif -} - -#endif /* _ASM_TILE_SYSCALL_H */ diff --git a/arch/tile/include/asm/syscalls.h b/arch/tile/include/asm/syscalls.h deleted file mode 100644 index 07b298450ef2..000000000000 --- a/arch/tile/include/asm/syscalls.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * syscalls.h - Linux syscall interfaces (arch-specific) - * - * Copyright (c) 2008 Jaswinder Singh Rajput - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_SYSCALLS_H -#define _ASM_TILE_SYSCALLS_H - -#include <linux/compiler.h> -#include <linux/linkage.h> -#include <linux/signal.h> -#include <linux/types.h> -#include <linux/compat.h> - -/* - * Note that by convention, any syscall which requires the current - * register set takes an additional "struct pt_regs *" pointer; a - * _sys_xxx() trampoline in intvec*.S just sets up the pointer and - * jumps to sys_xxx(). - */ - -/* kernel/sys.c */ -ssize_t sys32_readahead(int fd, u32 offset_lo, u32 offset_hi, u32 count); -long sys32_fadvise64(int fd, u32 offset_lo, u32 offset_hi, - u32 len, int advice); -int sys32_fadvise64_64(int fd, u32 offset_lo, u32 offset_hi, - u32 len_lo, u32 len_hi, int advice); -long sys_cacheflush(unsigned long addr, unsigned long len, - unsigned long flags); -#ifndef __tilegx__ /* No mmap() in the 32-bit kernel. */ -#define sys_mmap sys_mmap -#endif - -#ifndef __tilegx__ -/* mm/fault.c */ -long sys_cmpxchg_badaddr(unsigned long address); -#endif - -#ifdef CONFIG_COMPAT -/* These four are not defined for 64-bit, but serve as "compat" syscalls. */ -long sys_fcntl64(unsigned int fd, unsigned int cmd, unsigned long arg); -long sys_fstat64(unsigned long fd, struct stat64 __user *statbuf); -long sys_truncate64(const char __user *path, loff_t length); -long sys_ftruncate64(unsigned int fd, loff_t length); -#endif - -/* Provide versions of standard syscalls that use current_pt_regs(). */ -long sys_rt_sigreturn(void); -#define sys_rt_sigreturn sys_rt_sigreturn - -/* These are the intvec*.S trampolines. */ -long _sys_rt_sigreturn(void); -long _sys_clone(unsigned long clone_flags, unsigned long newsp, - void __user *parent_tid, void __user *child_tid); - -#include <asm-generic/syscalls.h> - -#endif /* _ASM_TILE_SYSCALLS_H */ diff --git a/arch/tile/include/asm/thread_info.h b/arch/tile/include/asm/thread_info.h deleted file mode 100644 index 2adcacd85749..000000000000 --- a/arch/tile/include/asm/thread_info.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_THREAD_INFO_H -#define _ASM_TILE_THREAD_INFO_H - -#include <asm/processor.h> -#include <asm/page.h> -#ifndef __ASSEMBLY__ - -/* - * Low level task data that assembly code needs immediate access to. - * The structure is placed at the bottom of the supervisor stack. - */ -struct thread_info { - struct task_struct *task; /* main task structure */ - unsigned long flags; /* low level flags */ - unsigned long status; /* thread-synchronous flags */ - __u32 homecache_cpu; /* CPU we are homecached on */ - __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, - <0 => BUG */ - - mm_segment_t addr_limit; /* thread address space - (KERNEL_DS or USER_DS) */ - struct single_step_state *step_state; /* single step state - (if non-zero) */ - int align_ctl; /* controls unaligned access */ -#ifdef __tilegx__ - unsigned long unalign_jit_tmp[4]; /* temp r0..r3 storage */ - void __user *unalign_jit_base; /* unalign fixup JIT base */ -#endif - bool in_backtrace; /* currently doing backtrace? */ -}; - -/* - * macros/functions for gaining access to the thread information structure. - */ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = INIT_PREEMPT_COUNT, \ - .addr_limit = KERNEL_DS, \ - .step_state = NULL, \ - .align_ctl = 0, \ -} - -#endif /* !__ASSEMBLY__ */ - -#if PAGE_SIZE < 8192 -#define THREAD_SIZE_ORDER (13 - PAGE_SHIFT) -#else -#define THREAD_SIZE_ORDER (0) -#endif -#define THREAD_SIZE_PAGES (1 << THREAD_SIZE_ORDER) - -#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) -#define LOG2_THREAD_SIZE (PAGE_SHIFT + THREAD_SIZE_ORDER) - -#define STACK_WARN (THREAD_SIZE/8) - -#ifndef __ASSEMBLY__ - -void arch_release_thread_stack(unsigned long *stack); - -/* How to get the thread information struct from C. */ -register unsigned long stack_pointer __asm__("sp"); - -#define current_thread_info() \ - ((struct thread_info *)(stack_pointer & -THREAD_SIZE)) - -/* Sit on a nap instruction until interrupted. */ -extern void smp_nap(void); - -/* Enable interrupts racelessly and nap forever: helper for arch_cpu_idle(). */ -extern void _cpu_idle(void); - -#else /* __ASSEMBLY__ */ - -/* - * How to get the thread information struct from assembly. - * Note that we use different macros since different architectures - * have different semantics in their "mm" instruction and we would - * like to guarantee that the macro expands to exactly one instruction. - */ -#ifdef __tilegx__ -#define EXTRACT_THREAD_INFO(reg) mm reg, zero, LOG2_THREAD_SIZE, 63 -#else -#define GET_THREAD_INFO(reg) mm reg, sp, zero, LOG2_THREAD_SIZE, 31 -#endif - -#endif /* !__ASSEMBLY__ */ - -/* - * Thread information flags that various assembly files may need to access. - * Keep flags accessed frequently in low bits, particular since it makes - * it easier to build constants in assembly. - */ -#define TIF_SIGPENDING 0 /* signal pending */ -#define TIF_NEED_RESCHED 1 /* rescheduling necessary */ -#define TIF_SINGLESTEP 2 /* restore singlestep on return to - user mode */ -#define TIF_ASYNC_TLB 3 /* got an async TLB fault in kernel */ -#define TIF_SYSCALL_TRACE 4 /* syscall trace active */ -#define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */ -#define TIF_SECCOMP 6 /* secure computing */ -#define TIF_MEMDIE 7 /* OOM killer at work */ -#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */ -#define TIF_SYSCALL_TRACEPOINT 9 /* syscall tracepoint instrumentation */ -#define TIF_POLLING_NRFLAG 10 /* idle is polling for TIF_NEED_RESCHED */ -#define TIF_NOHZ 11 /* in adaptive nohz mode */ - -#define _TIF_SIGPENDING (1<<TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) -#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP) -#define _TIF_ASYNC_TLB (1<<TIF_ASYNC_TLB) -#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) -#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT) -#define _TIF_SECCOMP (1<<TIF_SECCOMP) -#define _TIF_MEMDIE (1<<TIF_MEMDIE) -#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) -#define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT) -#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) -#define _TIF_NOHZ (1<<TIF_NOHZ) - -/* Work to do as we loop to exit to user space. */ -#define _TIF_WORK_MASK \ - (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \ - _TIF_ASYNC_TLB | _TIF_NOTIFY_RESUME) - -/* Work to do on any return to user space. */ -#define _TIF_ALLWORK_MASK \ - (_TIF_WORK_MASK | _TIF_SINGLESTEP | _TIF_NOHZ) - -/* Work to do at syscall entry. */ -#define _TIF_SYSCALL_ENTRY_WORK \ - (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_TRACEPOINT | _TIF_NOHZ) - -/* Work to do at syscall exit. */ -#define _TIF_SYSCALL_EXIT_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_TRACEPOINT) - -/* - * Thread-synchronous status. - * - * This is different from the flags in that nobody else - * ever touches our thread-synchronous status, so we don't - * have to worry about atomic accesses. - */ -#ifdef __tilegx__ -#define TS_COMPAT 0x0001 /* 32-bit compatibility mode */ -#endif - -#endif /* _ASM_TILE_THREAD_INFO_H */ diff --git a/arch/tile/include/asm/tile-desc.h b/arch/tile/include/asm/tile-desc.h deleted file mode 100644 index 43849bf79dcb..000000000000 --- a/arch/tile/include/asm/tile-desc.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef __tilegx__ -#include <asm/tile-desc_32.h> -#else -#include <asm/tile-desc_64.h> -#endif diff --git a/arch/tile/include/asm/tile-desc_32.h b/arch/tile/include/asm/tile-desc_32.h deleted file mode 100644 index f09c5c43b0b2..000000000000 --- a/arch/tile/include/asm/tile-desc_32.h +++ /dev/null @@ -1,553 +0,0 @@ -/* TILEPro opcode information. - * - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * - * - * - * - */ - -#ifndef opcode_tilepro_h -#define opcode_tilepro_h - -#include <arch/opcode.h> - - -enum -{ - TILEPRO_MAX_OPERANDS = 5 /* mm */ -}; - -typedef enum -{ - TILEPRO_OPC_BPT, - TILEPRO_OPC_INFO, - TILEPRO_OPC_INFOL, - TILEPRO_OPC_J, - TILEPRO_OPC_JAL, - TILEPRO_OPC_MOVE, - TILEPRO_OPC_MOVE_SN, - TILEPRO_OPC_MOVEI, - TILEPRO_OPC_MOVEI_SN, - TILEPRO_OPC_MOVELI, - TILEPRO_OPC_MOVELI_SN, - TILEPRO_OPC_MOVELIS, - TILEPRO_OPC_PREFETCH, - TILEPRO_OPC_RAISE, - TILEPRO_OPC_ADD, - TILEPRO_OPC_ADD_SN, - TILEPRO_OPC_ADDB, - TILEPRO_OPC_ADDB_SN, - TILEPRO_OPC_ADDBS_U, - TILEPRO_OPC_ADDBS_U_SN, - TILEPRO_OPC_ADDH, - TILEPRO_OPC_ADDH_SN, - TILEPRO_OPC_ADDHS, - TILEPRO_OPC_ADDHS_SN, - TILEPRO_OPC_ADDI, - TILEPRO_OPC_ADDI_SN, - TILEPRO_OPC_ADDIB, - TILEPRO_OPC_ADDIB_SN, - TILEPRO_OPC_ADDIH, - TILEPRO_OPC_ADDIH_SN, - TILEPRO_OPC_ADDLI, - TILEPRO_OPC_ADDLI_SN, - TILEPRO_OPC_ADDLIS, - TILEPRO_OPC_ADDS, - TILEPRO_OPC_ADDS_SN, - TILEPRO_OPC_ADIFFB_U, - TILEPRO_OPC_ADIFFB_U_SN, - TILEPRO_OPC_ADIFFH, - TILEPRO_OPC_ADIFFH_SN, - TILEPRO_OPC_AND, - TILEPRO_OPC_AND_SN, - TILEPRO_OPC_ANDI, - TILEPRO_OPC_ANDI_SN, - TILEPRO_OPC_AULI, - TILEPRO_OPC_AVGB_U, - TILEPRO_OPC_AVGB_U_SN, - TILEPRO_OPC_AVGH, - TILEPRO_OPC_AVGH_SN, - TILEPRO_OPC_BBNS, - TILEPRO_OPC_BBNS_SN, - TILEPRO_OPC_BBNST, - TILEPRO_OPC_BBNST_SN, - TILEPRO_OPC_BBS, - TILEPRO_OPC_BBS_SN, - TILEPRO_OPC_BBST, - TILEPRO_OPC_BBST_SN, - TILEPRO_OPC_BGEZ, - TILEPRO_OPC_BGEZ_SN, - TILEPRO_OPC_BGEZT, - TILEPRO_OPC_BGEZT_SN, - TILEPRO_OPC_BGZ, - TILEPRO_OPC_BGZ_SN, - TILEPRO_OPC_BGZT, - TILEPRO_OPC_BGZT_SN, - TILEPRO_OPC_BITX, - TILEPRO_OPC_BITX_SN, - TILEPRO_OPC_BLEZ, - TILEPRO_OPC_BLEZ_SN, - TILEPRO_OPC_BLEZT, - TILEPRO_OPC_BLEZT_SN, - TILEPRO_OPC_BLZ, - TILEPRO_OPC_BLZ_SN, - TILEPRO_OPC_BLZT, - TILEPRO_OPC_BLZT_SN, - TILEPRO_OPC_BNZ, - TILEPRO_OPC_BNZ_SN, - TILEPRO_OPC_BNZT, - TILEPRO_OPC_BNZT_SN, - TILEPRO_OPC_BYTEX, - TILEPRO_OPC_BYTEX_SN, - TILEPRO_OPC_BZ, - TILEPRO_OPC_BZ_SN, - TILEPRO_OPC_BZT, - TILEPRO_OPC_BZT_SN, - TILEPRO_OPC_CLZ, - TILEPRO_OPC_CLZ_SN, - TILEPRO_OPC_CRC32_32, - TILEPRO_OPC_CRC32_32_SN, - TILEPRO_OPC_CRC32_8, - TILEPRO_OPC_CRC32_8_SN, - TILEPRO_OPC_CTZ, - TILEPRO_OPC_CTZ_SN, - TILEPRO_OPC_DRAIN, - TILEPRO_OPC_DTLBPR, - TILEPRO_OPC_DWORD_ALIGN, - TILEPRO_OPC_DWORD_ALIGN_SN, - TILEPRO_OPC_FINV, - TILEPRO_OPC_FLUSH, - TILEPRO_OPC_FNOP, - TILEPRO_OPC_ICOH, - TILEPRO_OPC_ILL, - TILEPRO_OPC_INTHB, - TILEPRO_OPC_INTHB_SN, - TILEPRO_OPC_INTHH, - TILEPRO_OPC_INTHH_SN, - TILEPRO_OPC_INTLB, - TILEPRO_OPC_INTLB_SN, - TILEPRO_OPC_INTLH, - TILEPRO_OPC_INTLH_SN, - TILEPRO_OPC_INV, - TILEPRO_OPC_IRET, - TILEPRO_OPC_JALB, - TILEPRO_OPC_JALF, - TILEPRO_OPC_JALR, - TILEPRO_OPC_JALRP, - TILEPRO_OPC_JB, - TILEPRO_OPC_JF, - TILEPRO_OPC_JR, - TILEPRO_OPC_JRP, - TILEPRO_OPC_LB, - TILEPRO_OPC_LB_SN, - TILEPRO_OPC_LB_U, - TILEPRO_OPC_LB_U_SN, - TILEPRO_OPC_LBADD, - TILEPRO_OPC_LBADD_SN, - TILEPRO_OPC_LBADD_U, - TILEPRO_OPC_LBADD_U_SN, - TILEPRO_OPC_LH, - TILEPRO_OPC_LH_SN, - TILEPRO_OPC_LH_U, - TILEPRO_OPC_LH_U_SN, - TILEPRO_OPC_LHADD, - TILEPRO_OPC_LHADD_SN, - TILEPRO_OPC_LHADD_U, - TILEPRO_OPC_LHADD_U_SN, - TILEPRO_OPC_LNK, - TILEPRO_OPC_LNK_SN, - TILEPRO_OPC_LW, - TILEPRO_OPC_LW_SN, - TILEPRO_OPC_LW_NA, - TILEPRO_OPC_LW_NA_SN, - TILEPRO_OPC_LWADD, - TILEPRO_OPC_LWADD_SN, - TILEPRO_OPC_LWADD_NA, - TILEPRO_OPC_LWADD_NA_SN, - TILEPRO_OPC_MAXB_U, - TILEPRO_OPC_MAXB_U_SN, - TILEPRO_OPC_MAXH, - TILEPRO_OPC_MAXH_SN, - TILEPRO_OPC_MAXIB_U, - TILEPRO_OPC_MAXIB_U_SN, - TILEPRO_OPC_MAXIH, - TILEPRO_OPC_MAXIH_SN, - TILEPRO_OPC_MF, - TILEPRO_OPC_MFSPR, - TILEPRO_OPC_MINB_U, - TILEPRO_OPC_MINB_U_SN, - TILEPRO_OPC_MINH, - TILEPRO_OPC_MINH_SN, - TILEPRO_OPC_MINIB_U, - TILEPRO_OPC_MINIB_U_SN, - TILEPRO_OPC_MINIH, - TILEPRO_OPC_MINIH_SN, - TILEPRO_OPC_MM, - TILEPRO_OPC_MNZ, - TILEPRO_OPC_MNZ_SN, - TILEPRO_OPC_MNZB, - TILEPRO_OPC_MNZB_SN, - TILEPRO_OPC_MNZH, - TILEPRO_OPC_MNZH_SN, - TILEPRO_OPC_MTSPR, - TILEPRO_OPC_MULHH_SS, - TILEPRO_OPC_MULHH_SS_SN, - TILEPRO_OPC_MULHH_SU, - TILEPRO_OPC_MULHH_SU_SN, - TILEPRO_OPC_MULHH_UU, - TILEPRO_OPC_MULHH_UU_SN, - TILEPRO_OPC_MULHHA_SS, - TILEPRO_OPC_MULHHA_SS_SN, - TILEPRO_OPC_MULHHA_SU, - TILEPRO_OPC_MULHHA_SU_SN, - TILEPRO_OPC_MULHHA_UU, - TILEPRO_OPC_MULHHA_UU_SN, - TILEPRO_OPC_MULHHSA_UU, - TILEPRO_OPC_MULHHSA_UU_SN, - TILEPRO_OPC_MULHL_SS, - TILEPRO_OPC_MULHL_SS_SN, - TILEPRO_OPC_MULHL_SU, - TILEPRO_OPC_MULHL_SU_SN, - TILEPRO_OPC_MULHL_US, - TILEPRO_OPC_MULHL_US_SN, - TILEPRO_OPC_MULHL_UU, - TILEPRO_OPC_MULHL_UU_SN, - TILEPRO_OPC_MULHLA_SS, - TILEPRO_OPC_MULHLA_SS_SN, - TILEPRO_OPC_MULHLA_SU, - TILEPRO_OPC_MULHLA_SU_SN, - TILEPRO_OPC_MULHLA_US, - TILEPRO_OPC_MULHLA_US_SN, - TILEPRO_OPC_MULHLA_UU, - TILEPRO_OPC_MULHLA_UU_SN, - TILEPRO_OPC_MULHLSA_UU, - TILEPRO_OPC_MULHLSA_UU_SN, - TILEPRO_OPC_MULLL_SS, - TILEPRO_OPC_MULLL_SS_SN, - TILEPRO_OPC_MULLL_SU, - TILEPRO_OPC_MULLL_SU_SN, - TILEPRO_OPC_MULLL_UU, - TILEPRO_OPC_MULLL_UU_SN, - TILEPRO_OPC_MULLLA_SS, - TILEPRO_OPC_MULLLA_SS_SN, - TILEPRO_OPC_MULLLA_SU, - TILEPRO_OPC_MULLLA_SU_SN, - TILEPRO_OPC_MULLLA_UU, - TILEPRO_OPC_MULLLA_UU_SN, - TILEPRO_OPC_MULLLSA_UU, - TILEPRO_OPC_MULLLSA_UU_SN, - TILEPRO_OPC_MVNZ, - TILEPRO_OPC_MVNZ_SN, - TILEPRO_OPC_MVZ, - TILEPRO_OPC_MVZ_SN, - TILEPRO_OPC_MZ, - TILEPRO_OPC_MZ_SN, - TILEPRO_OPC_MZB, - TILEPRO_OPC_MZB_SN, - TILEPRO_OPC_MZH, - TILEPRO_OPC_MZH_SN, - TILEPRO_OPC_NAP, - TILEPRO_OPC_NOP, - TILEPRO_OPC_NOR, - TILEPRO_OPC_NOR_SN, - TILEPRO_OPC_OR, - TILEPRO_OPC_OR_SN, - TILEPRO_OPC_ORI, - TILEPRO_OPC_ORI_SN, - TILEPRO_OPC_PACKBS_U, - TILEPRO_OPC_PACKBS_U_SN, - TILEPRO_OPC_PACKHB, - TILEPRO_OPC_PACKHB_SN, - TILEPRO_OPC_PACKHS, - TILEPRO_OPC_PACKHS_SN, - TILEPRO_OPC_PACKLB, - TILEPRO_OPC_PACKLB_SN, - TILEPRO_OPC_PCNT, - TILEPRO_OPC_PCNT_SN, - TILEPRO_OPC_RL, - TILEPRO_OPC_RL_SN, - TILEPRO_OPC_RLI, - TILEPRO_OPC_RLI_SN, - TILEPRO_OPC_S1A, - TILEPRO_OPC_S1A_SN, - TILEPRO_OPC_S2A, - TILEPRO_OPC_S2A_SN, - TILEPRO_OPC_S3A, - TILEPRO_OPC_S3A_SN, - TILEPRO_OPC_SADAB_U, - TILEPRO_OPC_SADAB_U_SN, - TILEPRO_OPC_SADAH, - TILEPRO_OPC_SADAH_SN, - TILEPRO_OPC_SADAH_U, - TILEPRO_OPC_SADAH_U_SN, - TILEPRO_OPC_SADB_U, - TILEPRO_OPC_SADB_U_SN, - TILEPRO_OPC_SADH, - TILEPRO_OPC_SADH_SN, - TILEPRO_OPC_SADH_U, - TILEPRO_OPC_SADH_U_SN, - TILEPRO_OPC_SB, - TILEPRO_OPC_SBADD, - TILEPRO_OPC_SEQ, - TILEPRO_OPC_SEQ_SN, - TILEPRO_OPC_SEQB, - TILEPRO_OPC_SEQB_SN, - TILEPRO_OPC_SEQH, - TILEPRO_OPC_SEQH_SN, - TILEPRO_OPC_SEQI, - TILEPRO_OPC_SEQI_SN, - TILEPRO_OPC_SEQIB, - TILEPRO_OPC_SEQIB_SN, - TILEPRO_OPC_SEQIH, - TILEPRO_OPC_SEQIH_SN, - TILEPRO_OPC_SH, - TILEPRO_OPC_SHADD, - TILEPRO_OPC_SHL, - TILEPRO_OPC_SHL_SN, - TILEPRO_OPC_SHLB, - TILEPRO_OPC_SHLB_SN, - TILEPRO_OPC_SHLH, - TILEPRO_OPC_SHLH_SN, - TILEPRO_OPC_SHLI, - TILEPRO_OPC_SHLI_SN, - TILEPRO_OPC_SHLIB, - TILEPRO_OPC_SHLIB_SN, - TILEPRO_OPC_SHLIH, - TILEPRO_OPC_SHLIH_SN, - TILEPRO_OPC_SHR, - TILEPRO_OPC_SHR_SN, - TILEPRO_OPC_SHRB, - TILEPRO_OPC_SHRB_SN, - TILEPRO_OPC_SHRH, - TILEPRO_OPC_SHRH_SN, - TILEPRO_OPC_SHRI, - TILEPRO_OPC_SHRI_SN, - TILEPRO_OPC_SHRIB, - TILEPRO_OPC_SHRIB_SN, - TILEPRO_OPC_SHRIH, - TILEPRO_OPC_SHRIH_SN, - TILEPRO_OPC_SLT, - TILEPRO_OPC_SLT_SN, - TILEPRO_OPC_SLT_U, - TILEPRO_OPC_SLT_U_SN, - TILEPRO_OPC_SLTB, - TILEPRO_OPC_SLTB_SN, - TILEPRO_OPC_SLTB_U, - TILEPRO_OPC_SLTB_U_SN, - TILEPRO_OPC_SLTE, - TILEPRO_OPC_SLTE_SN, - TILEPRO_OPC_SLTE_U, - TILEPRO_OPC_SLTE_U_SN, - TILEPRO_OPC_SLTEB, - TILEPRO_OPC_SLTEB_SN, - TILEPRO_OPC_SLTEB_U, - TILEPRO_OPC_SLTEB_U_SN, - TILEPRO_OPC_SLTEH, - TILEPRO_OPC_SLTEH_SN, - TILEPRO_OPC_SLTEH_U, - TILEPRO_OPC_SLTEH_U_SN, - TILEPRO_OPC_SLTH, - TILEPRO_OPC_SLTH_SN, - TILEPRO_OPC_SLTH_U, - TILEPRO_OPC_SLTH_U_SN, - TILEPRO_OPC_SLTI, - TILEPRO_OPC_SLTI_SN, - TILEPRO_OPC_SLTI_U, - TILEPRO_OPC_SLTI_U_SN, - TILEPRO_OPC_SLTIB, - TILEPRO_OPC_SLTIB_SN, - TILEPRO_OPC_SLTIB_U, - TILEPRO_OPC_SLTIB_U_SN, - TILEPRO_OPC_SLTIH, - TILEPRO_OPC_SLTIH_SN, - TILEPRO_OPC_SLTIH_U, - TILEPRO_OPC_SLTIH_U_SN, - TILEPRO_OPC_SNE, - TILEPRO_OPC_SNE_SN, - TILEPRO_OPC_SNEB, - TILEPRO_OPC_SNEB_SN, - TILEPRO_OPC_SNEH, - TILEPRO_OPC_SNEH_SN, - TILEPRO_OPC_SRA, - TILEPRO_OPC_SRA_SN, - TILEPRO_OPC_SRAB, - TILEPRO_OPC_SRAB_SN, - TILEPRO_OPC_SRAH, - TILEPRO_OPC_SRAH_SN, - TILEPRO_OPC_SRAI, - TILEPRO_OPC_SRAI_SN, - TILEPRO_OPC_SRAIB, - TILEPRO_OPC_SRAIB_SN, - TILEPRO_OPC_SRAIH, - TILEPRO_OPC_SRAIH_SN, - TILEPRO_OPC_SUB, - TILEPRO_OPC_SUB_SN, - TILEPRO_OPC_SUBB, - TILEPRO_OPC_SUBB_SN, - TILEPRO_OPC_SUBBS_U, - TILEPRO_OPC_SUBBS_U_SN, - TILEPRO_OPC_SUBH, - TILEPRO_OPC_SUBH_SN, - TILEPRO_OPC_SUBHS, - TILEPRO_OPC_SUBHS_SN, - TILEPRO_OPC_SUBS, - TILEPRO_OPC_SUBS_SN, - TILEPRO_OPC_SW, - TILEPRO_OPC_SWADD, - TILEPRO_OPC_SWINT0, - TILEPRO_OPC_SWINT1, - TILEPRO_OPC_SWINT2, - TILEPRO_OPC_SWINT3, - TILEPRO_OPC_TBLIDXB0, - TILEPRO_OPC_TBLIDXB0_SN, - TILEPRO_OPC_TBLIDXB1, - TILEPRO_OPC_TBLIDXB1_SN, - TILEPRO_OPC_TBLIDXB2, - TILEPRO_OPC_TBLIDXB2_SN, - TILEPRO_OPC_TBLIDXB3, - TILEPRO_OPC_TBLIDXB3_SN, - TILEPRO_OPC_TNS, - TILEPRO_OPC_TNS_SN, - TILEPRO_OPC_WH64, - TILEPRO_OPC_XOR, - TILEPRO_OPC_XOR_SN, - TILEPRO_OPC_XORI, - TILEPRO_OPC_XORI_SN, - TILEPRO_OPC_NONE -} tilepro_mnemonic; - - - - -typedef enum -{ - TILEPRO_PIPELINE_X0, - TILEPRO_PIPELINE_X1, - TILEPRO_PIPELINE_Y0, - TILEPRO_PIPELINE_Y1, - TILEPRO_PIPELINE_Y2, -} tilepro_pipeline; - -#define tilepro_is_x_pipeline(p) ((int)(p) <= (int)TILEPRO_PIPELINE_X1) - -typedef enum -{ - TILEPRO_OP_TYPE_REGISTER, - TILEPRO_OP_TYPE_IMMEDIATE, - TILEPRO_OP_TYPE_ADDRESS, - TILEPRO_OP_TYPE_SPR -} tilepro_operand_type; - -struct tilepro_operand -{ - /* Is this operand a register, immediate or address? */ - tilepro_operand_type type; - - /* The default relocation type for this operand. */ - signed int default_reloc : 16; - - /* How many bits is this value? (used for range checking) */ - unsigned int num_bits : 5; - - /* Is the value signed? (used for range checking) */ - unsigned int is_signed : 1; - - /* Is this operand a source register? */ - unsigned int is_src_reg : 1; - - /* Is this operand written? (i.e. is it a destination register) */ - unsigned int is_dest_reg : 1; - - /* Is this operand PC-relative? */ - unsigned int is_pc_relative : 1; - - /* By how many bits do we right shift the value before inserting? */ - unsigned int rightshift : 2; - - /* Return the bits for this operand to be ORed into an existing bundle. */ - tilepro_bundle_bits (*insert) (int op); - - /* Extract this operand and return it. */ - unsigned int (*extract) (tilepro_bundle_bits bundle); -}; - - -extern const struct tilepro_operand tilepro_operands[]; - -/* One finite-state machine per pipe for rapid instruction decoding. */ -extern const unsigned short * const -tilepro_bundle_decoder_fsms[TILEPRO_NUM_PIPELINE_ENCODINGS]; - - -struct tilepro_opcode -{ - /* The opcode mnemonic, e.g. "add" */ - const char *name; - - /* The enum value for this mnemonic. */ - tilepro_mnemonic mnemonic; - - /* A bit mask of which of the five pipes this instruction - is compatible with: - X0 0x01 - X1 0x02 - Y0 0x04 - Y1 0x08 - Y2 0x10 */ - unsigned char pipes; - - /* How many operands are there? */ - unsigned char num_operands; - - /* Which register does this write implicitly, or TREG_ZERO if none? */ - unsigned char implicitly_written_register; - - /* Can this be bundled with other instructions (almost always true). */ - unsigned char can_bundle; - - /* The description of the operands. Each of these is an - * index into the tilepro_operands[] table. */ - unsigned char operands[TILEPRO_NUM_PIPELINE_ENCODINGS][TILEPRO_MAX_OPERANDS]; - -}; - -extern const struct tilepro_opcode tilepro_opcodes[]; - - -/* Used for non-textual disassembly into structs. */ -struct tilepro_decoded_instruction -{ - const struct tilepro_opcode *opcode; - const struct tilepro_operand *operands[TILEPRO_MAX_OPERANDS]; - int operand_values[TILEPRO_MAX_OPERANDS]; -}; - - -/* Disassemble a bundle into a struct for machine processing. */ -extern int parse_insn_tilepro(tilepro_bundle_bits bits, - unsigned int pc, - struct tilepro_decoded_instruction - decoded[TILEPRO_MAX_INSTRUCTIONS_PER_BUNDLE]); - - -/* Given a set of bundle bits and a specific pipe, returns which - * instruction the bundle contains in that pipe. - */ -extern const struct tilepro_opcode * -find_opcode(tilepro_bundle_bits bits, tilepro_pipeline pipe); - - - -#endif /* opcode_tilepro_h */ diff --git a/arch/tile/include/asm/tile-desc_64.h b/arch/tile/include/asm/tile-desc_64.h deleted file mode 100644 index 1819efcba54d..000000000000 --- a/arch/tile/include/asm/tile-desc_64.h +++ /dev/null @@ -1,483 +0,0 @@ -/* TILE-Gx opcode information. - * - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * - * - * - * - */ - -#ifndef opcode_tile_h -#define opcode_tile_h - -#include <arch/opcode.h> - - -enum -{ - TILEGX_MAX_OPERANDS = 4 /* bfexts */ -}; - -typedef enum -{ - TILEGX_OPC_BPT, - TILEGX_OPC_INFO, - TILEGX_OPC_INFOL, - TILEGX_OPC_MOVE, - TILEGX_OPC_MOVEI, - TILEGX_OPC_MOVELI, - TILEGX_OPC_PREFETCH, - TILEGX_OPC_PREFETCH_ADD_L1, - TILEGX_OPC_PREFETCH_ADD_L1_FAULT, - TILEGX_OPC_PREFETCH_ADD_L2, - TILEGX_OPC_PREFETCH_ADD_L2_FAULT, - TILEGX_OPC_PREFETCH_ADD_L3, - TILEGX_OPC_PREFETCH_ADD_L3_FAULT, - TILEGX_OPC_PREFETCH_L1, - TILEGX_OPC_PREFETCH_L1_FAULT, - TILEGX_OPC_PREFETCH_L2, - TILEGX_OPC_PREFETCH_L2_FAULT, - TILEGX_OPC_PREFETCH_L3, - TILEGX_OPC_PREFETCH_L3_FAULT, - TILEGX_OPC_RAISE, - TILEGX_OPC_ADD, - TILEGX_OPC_ADDI, - TILEGX_OPC_ADDLI, - TILEGX_OPC_ADDX, - TILEGX_OPC_ADDXI, - TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXSC, - TILEGX_OPC_AND, - TILEGX_OPC_ANDI, - TILEGX_OPC_BEQZ, - TILEGX_OPC_BEQZT, - TILEGX_OPC_BFEXTS, - TILEGX_OPC_BFEXTU, - TILEGX_OPC_BFINS, - TILEGX_OPC_BGEZ, - TILEGX_OPC_BGEZT, - TILEGX_OPC_BGTZ, - TILEGX_OPC_BGTZT, - TILEGX_OPC_BLBC, - TILEGX_OPC_BLBCT, - TILEGX_OPC_BLBS, - TILEGX_OPC_BLBST, - TILEGX_OPC_BLEZ, - TILEGX_OPC_BLEZT, - TILEGX_OPC_BLTZ, - TILEGX_OPC_BLTZT, - TILEGX_OPC_BNEZ, - TILEGX_OPC_BNEZT, - TILEGX_OPC_CLZ, - TILEGX_OPC_CMOVEQZ, - TILEGX_OPC_CMOVNEZ, - TILEGX_OPC_CMPEQ, - TILEGX_OPC_CMPEQI, - TILEGX_OPC_CMPEXCH, - TILEGX_OPC_CMPEXCH4, - TILEGX_OPC_CMPLES, - TILEGX_OPC_CMPLEU, - TILEGX_OPC_CMPLTS, - TILEGX_OPC_CMPLTSI, - TILEGX_OPC_CMPLTU, - TILEGX_OPC_CMPLTUI, - TILEGX_OPC_CMPNE, - TILEGX_OPC_CMUL, - TILEGX_OPC_CMULA, - TILEGX_OPC_CMULAF, - TILEGX_OPC_CMULF, - TILEGX_OPC_CMULFR, - TILEGX_OPC_CMULH, - TILEGX_OPC_CMULHR, - TILEGX_OPC_CRC32_32, - TILEGX_OPC_CRC32_8, - TILEGX_OPC_CTZ, - TILEGX_OPC_DBLALIGN, - TILEGX_OPC_DBLALIGN2, - TILEGX_OPC_DBLALIGN4, - TILEGX_OPC_DBLALIGN6, - TILEGX_OPC_DRAIN, - TILEGX_OPC_DTLBPR, - TILEGX_OPC_EXCH, - TILEGX_OPC_EXCH4, - TILEGX_OPC_FDOUBLE_ADD_FLAGS, - TILEGX_OPC_FDOUBLE_ADDSUB, - TILEGX_OPC_FDOUBLE_MUL_FLAGS, - TILEGX_OPC_FDOUBLE_PACK1, - TILEGX_OPC_FDOUBLE_PACK2, - TILEGX_OPC_FDOUBLE_SUB_FLAGS, - TILEGX_OPC_FDOUBLE_UNPACK_MAX, - TILEGX_OPC_FDOUBLE_UNPACK_MIN, - TILEGX_OPC_FETCHADD, - TILEGX_OPC_FETCHADD4, - TILEGX_OPC_FETCHADDGEZ, - TILEGX_OPC_FETCHADDGEZ4, - TILEGX_OPC_FETCHAND, - TILEGX_OPC_FETCHAND4, - TILEGX_OPC_FETCHOR, - TILEGX_OPC_FETCHOR4, - TILEGX_OPC_FINV, - TILEGX_OPC_FLUSH, - TILEGX_OPC_FLUSHWB, - TILEGX_OPC_FNOP, - TILEGX_OPC_FSINGLE_ADD1, - TILEGX_OPC_FSINGLE_ADDSUB2, - TILEGX_OPC_FSINGLE_MUL1, - TILEGX_OPC_FSINGLE_MUL2, - TILEGX_OPC_FSINGLE_PACK1, - TILEGX_OPC_FSINGLE_PACK2, - TILEGX_OPC_FSINGLE_SUB1, - TILEGX_OPC_ICOH, - TILEGX_OPC_ILL, - TILEGX_OPC_INV, - TILEGX_OPC_IRET, - TILEGX_OPC_J, - TILEGX_OPC_JAL, - TILEGX_OPC_JALR, - TILEGX_OPC_JALRP, - TILEGX_OPC_JR, - TILEGX_OPC_JRP, - TILEGX_OPC_LD, - TILEGX_OPC_LD1S, - TILEGX_OPC_LD1S_ADD, - TILEGX_OPC_LD1U, - TILEGX_OPC_LD1U_ADD, - TILEGX_OPC_LD2S, - TILEGX_OPC_LD2S_ADD, - TILEGX_OPC_LD2U, - TILEGX_OPC_LD2U_ADD, - TILEGX_OPC_LD4S, - TILEGX_OPC_LD4S_ADD, - TILEGX_OPC_LD4U, - TILEGX_OPC_LD4U_ADD, - TILEGX_OPC_LD_ADD, - TILEGX_OPC_LDNA, - TILEGX_OPC_LDNA_ADD, - TILEGX_OPC_LDNT, - TILEGX_OPC_LDNT1S, - TILEGX_OPC_LDNT1S_ADD, - TILEGX_OPC_LDNT1U, - TILEGX_OPC_LDNT1U_ADD, - TILEGX_OPC_LDNT2S, - TILEGX_OPC_LDNT2S_ADD, - TILEGX_OPC_LDNT2U, - TILEGX_OPC_LDNT2U_ADD, - TILEGX_OPC_LDNT4S, - TILEGX_OPC_LDNT4S_ADD, - TILEGX_OPC_LDNT4U, - TILEGX_OPC_LDNT4U_ADD, - TILEGX_OPC_LDNT_ADD, - TILEGX_OPC_LNK, - TILEGX_OPC_MF, - TILEGX_OPC_MFSPR, - TILEGX_OPC_MM, - TILEGX_OPC_MNZ, - TILEGX_OPC_MTSPR, - TILEGX_OPC_MUL_HS_HS, - TILEGX_OPC_MUL_HS_HU, - TILEGX_OPC_MUL_HS_LS, - TILEGX_OPC_MUL_HS_LU, - TILEGX_OPC_MUL_HU_HU, - TILEGX_OPC_MUL_HU_LS, - TILEGX_OPC_MUL_HU_LU, - TILEGX_OPC_MUL_LS_LS, - TILEGX_OPC_MUL_LS_LU, - TILEGX_OPC_MUL_LU_LU, - TILEGX_OPC_MULA_HS_HS, - TILEGX_OPC_MULA_HS_HU, - TILEGX_OPC_MULA_HS_LS, - TILEGX_OPC_MULA_HS_LU, - TILEGX_OPC_MULA_HU_HU, - TILEGX_OPC_MULA_HU_LS, - TILEGX_OPC_MULA_HU_LU, - TILEGX_OPC_MULA_LS_LS, - TILEGX_OPC_MULA_LS_LU, - TILEGX_OPC_MULA_LU_LU, - TILEGX_OPC_MULAX, - TILEGX_OPC_MULX, - TILEGX_OPC_MZ, - TILEGX_OPC_NAP, - TILEGX_OPC_NOP, - TILEGX_OPC_NOR, - TILEGX_OPC_OR, - TILEGX_OPC_ORI, - TILEGX_OPC_PCNT, - TILEGX_OPC_REVBITS, - TILEGX_OPC_REVBYTES, - TILEGX_OPC_ROTL, - TILEGX_OPC_ROTLI, - TILEGX_OPC_SHL, - TILEGX_OPC_SHL16INSLI, - TILEGX_OPC_SHL1ADD, - TILEGX_OPC_SHL1ADDX, - TILEGX_OPC_SHL2ADD, - TILEGX_OPC_SHL2ADDX, - TILEGX_OPC_SHL3ADD, - TILEGX_OPC_SHL3ADDX, - TILEGX_OPC_SHLI, - TILEGX_OPC_SHLX, - TILEGX_OPC_SHLXI, - TILEGX_OPC_SHRS, - TILEGX_OPC_SHRSI, - TILEGX_OPC_SHRU, - TILEGX_OPC_SHRUI, - TILEGX_OPC_SHRUX, - TILEGX_OPC_SHRUXI, - TILEGX_OPC_SHUFFLEBYTES, - TILEGX_OPC_ST, - TILEGX_OPC_ST1, - TILEGX_OPC_ST1_ADD, - TILEGX_OPC_ST2, - TILEGX_OPC_ST2_ADD, - TILEGX_OPC_ST4, - TILEGX_OPC_ST4_ADD, - TILEGX_OPC_ST_ADD, - TILEGX_OPC_STNT, - TILEGX_OPC_STNT1, - TILEGX_OPC_STNT1_ADD, - TILEGX_OPC_STNT2, - TILEGX_OPC_STNT2_ADD, - TILEGX_OPC_STNT4, - TILEGX_OPC_STNT4_ADD, - TILEGX_OPC_STNT_ADD, - TILEGX_OPC_SUB, - TILEGX_OPC_SUBX, - TILEGX_OPC_SUBXSC, - TILEGX_OPC_SWINT0, - TILEGX_OPC_SWINT1, - TILEGX_OPC_SWINT2, - TILEGX_OPC_SWINT3, - TILEGX_OPC_TBLIDXB0, - TILEGX_OPC_TBLIDXB1, - TILEGX_OPC_TBLIDXB2, - TILEGX_OPC_TBLIDXB3, - TILEGX_OPC_V1ADD, - TILEGX_OPC_V1ADDI, - TILEGX_OPC_V1ADDUC, - TILEGX_OPC_V1ADIFFU, - TILEGX_OPC_V1AVGU, - TILEGX_OPC_V1CMPEQ, - TILEGX_OPC_V1CMPEQI, - TILEGX_OPC_V1CMPLES, - TILEGX_OPC_V1CMPLEU, - TILEGX_OPC_V1CMPLTS, - TILEGX_OPC_V1CMPLTSI, - TILEGX_OPC_V1CMPLTU, - TILEGX_OPC_V1CMPLTUI, - TILEGX_OPC_V1CMPNE, - TILEGX_OPC_V1DDOTPU, - TILEGX_OPC_V1DDOTPUA, - TILEGX_OPC_V1DDOTPUS, - TILEGX_OPC_V1DDOTPUSA, - TILEGX_OPC_V1DOTP, - TILEGX_OPC_V1DOTPA, - TILEGX_OPC_V1DOTPU, - TILEGX_OPC_V1DOTPUA, - TILEGX_OPC_V1DOTPUS, - TILEGX_OPC_V1DOTPUSA, - TILEGX_OPC_V1INT_H, - TILEGX_OPC_V1INT_L, - TILEGX_OPC_V1MAXU, - TILEGX_OPC_V1MAXUI, - TILEGX_OPC_V1MINU, - TILEGX_OPC_V1MINUI, - TILEGX_OPC_V1MNZ, - TILEGX_OPC_V1MULTU, - TILEGX_OPC_V1MULU, - TILEGX_OPC_V1MULUS, - TILEGX_OPC_V1MZ, - TILEGX_OPC_V1SADAU, - TILEGX_OPC_V1SADU, - TILEGX_OPC_V1SHL, - TILEGX_OPC_V1SHLI, - TILEGX_OPC_V1SHRS, - TILEGX_OPC_V1SHRSI, - TILEGX_OPC_V1SHRU, - TILEGX_OPC_V1SHRUI, - TILEGX_OPC_V1SUB, - TILEGX_OPC_V1SUBUC, - TILEGX_OPC_V2ADD, - TILEGX_OPC_V2ADDI, - TILEGX_OPC_V2ADDSC, - TILEGX_OPC_V2ADIFFS, - TILEGX_OPC_V2AVGS, - TILEGX_OPC_V2CMPEQ, - TILEGX_OPC_V2CMPEQI, - TILEGX_OPC_V2CMPLES, - TILEGX_OPC_V2CMPLEU, - TILEGX_OPC_V2CMPLTS, - TILEGX_OPC_V2CMPLTSI, - TILEGX_OPC_V2CMPLTU, - TILEGX_OPC_V2CMPLTUI, - TILEGX_OPC_V2CMPNE, - TILEGX_OPC_V2DOTP, - TILEGX_OPC_V2DOTPA, - TILEGX_OPC_V2INT_H, - TILEGX_OPC_V2INT_L, - TILEGX_OPC_V2MAXS, - TILEGX_OPC_V2MAXSI, - TILEGX_OPC_V2MINS, - TILEGX_OPC_V2MINSI, - TILEGX_OPC_V2MNZ, - TILEGX_OPC_V2MULFSC, - TILEGX_OPC_V2MULS, - TILEGX_OPC_V2MULTS, - TILEGX_OPC_V2MZ, - TILEGX_OPC_V2PACKH, - TILEGX_OPC_V2PACKL, - TILEGX_OPC_V2PACKUC, - TILEGX_OPC_V2SADAS, - TILEGX_OPC_V2SADAU, - TILEGX_OPC_V2SADS, - TILEGX_OPC_V2SADU, - TILEGX_OPC_V2SHL, - TILEGX_OPC_V2SHLI, - TILEGX_OPC_V2SHLSC, - TILEGX_OPC_V2SHRS, - TILEGX_OPC_V2SHRSI, - TILEGX_OPC_V2SHRU, - TILEGX_OPC_V2SHRUI, - TILEGX_OPC_V2SUB, - TILEGX_OPC_V2SUBSC, - TILEGX_OPC_V4ADD, - TILEGX_OPC_V4ADDSC, - TILEGX_OPC_V4INT_H, - TILEGX_OPC_V4INT_L, - TILEGX_OPC_V4PACKSC, - TILEGX_OPC_V4SHL, - TILEGX_OPC_V4SHLSC, - TILEGX_OPC_V4SHRS, - TILEGX_OPC_V4SHRU, - TILEGX_OPC_V4SUB, - TILEGX_OPC_V4SUBSC, - TILEGX_OPC_WH64, - TILEGX_OPC_XOR, - TILEGX_OPC_XORI, - TILEGX_OPC_NONE -} tilegx_mnemonic; - - - -typedef enum -{ - TILEGX_PIPELINE_X0, - TILEGX_PIPELINE_X1, - TILEGX_PIPELINE_Y0, - TILEGX_PIPELINE_Y1, - TILEGX_PIPELINE_Y2, -} tilegx_pipeline; - -#define tilegx_is_x_pipeline(p) ((int)(p) <= (int)TILEGX_PIPELINE_X1) - -typedef enum -{ - TILEGX_OP_TYPE_REGISTER, - TILEGX_OP_TYPE_IMMEDIATE, - TILEGX_OP_TYPE_ADDRESS, - TILEGX_OP_TYPE_SPR -} tilegx_operand_type; - -struct tilegx_operand -{ - /* Is this operand a register, immediate or address? */ - tilegx_operand_type type; - - /* The default relocation type for this operand. */ - signed int default_reloc : 16; - - /* How many bits is this value? (used for range checking) */ - unsigned int num_bits : 5; - - /* Is the value signed? (used for range checking) */ - unsigned int is_signed : 1; - - /* Is this operand a source register? */ - unsigned int is_src_reg : 1; - - /* Is this operand written? (i.e. is it a destination register) */ - unsigned int is_dest_reg : 1; - - /* Is this operand PC-relative? */ - unsigned int is_pc_relative : 1; - - /* By how many bits do we right shift the value before inserting? */ - unsigned int rightshift : 2; - - /* Return the bits for this operand to be ORed into an existing bundle. */ - tilegx_bundle_bits (*insert) (int op); - - /* Extract this operand and return it. */ - unsigned int (*extract) (tilegx_bundle_bits bundle); -}; - - -extern const struct tilegx_operand tilegx_operands[]; - -/* One finite-state machine per pipe for rapid instruction decoding. */ -extern const unsigned short * const -tilegx_bundle_decoder_fsms[TILEGX_NUM_PIPELINE_ENCODINGS]; - - -struct tilegx_opcode -{ - /* The opcode mnemonic, e.g. "add" */ - const char *name; - - /* The enum value for this mnemonic. */ - tilegx_mnemonic mnemonic; - - /* A bit mask of which of the five pipes this instruction - is compatible with: - X0 0x01 - X1 0x02 - Y0 0x04 - Y1 0x08 - Y2 0x10 */ - unsigned char pipes; - - /* How many operands are there? */ - unsigned char num_operands; - - /* Which register does this write implicitly, or TREG_ZERO if none? */ - unsigned char implicitly_written_register; - - /* Can this be bundled with other instructions (almost always true). */ - unsigned char can_bundle; - - /* The description of the operands. Each of these is an - * index into the tilegx_operands[] table. */ - unsigned char operands[TILEGX_NUM_PIPELINE_ENCODINGS][TILEGX_MAX_OPERANDS]; - -}; - -extern const struct tilegx_opcode tilegx_opcodes[]; - -/* Used for non-textual disassembly into structs. */ -struct tilegx_decoded_instruction -{ - const struct tilegx_opcode *opcode; - const struct tilegx_operand *operands[TILEGX_MAX_OPERANDS]; - long long operand_values[TILEGX_MAX_OPERANDS]; -}; - - -/* Disassemble a bundle into a struct for machine processing. */ -extern int parse_insn_tilegx(tilegx_bundle_bits bits, - unsigned long long pc, - struct tilegx_decoded_instruction - decoded[TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE]); - - - -#endif /* opcode_tilegx_h */ diff --git a/arch/tile/include/asm/timex.h b/arch/tile/include/asm/timex.h deleted file mode 100644 index dc987d53e2a9..000000000000 --- a/arch/tile/include/asm/timex.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_TIMEX_H -#define _ASM_TILE_TIMEX_H - -/* - * This rate should be a multiple of the possible HZ values (100, 250, 1000) - * and a fraction of the possible hardware timer frequencies. Our timer - * frequency is highly tunable but also quite precise, so for the primary use - * of this value (setting ACT_HZ from HZ) we just pick a value that causes - * ACT_HZ to be set to HZ. We make the value somewhat large just to be - * more robust in case someone tries out a new value of HZ. - */ -#define CLOCK_TICK_RATE 1000000 - -typedef unsigned long long cycles_t; - -#if CHIP_HAS_SPLIT_CYCLE() -cycles_t get_cycles(void); -#define get_cycles_low() __insn_mfspr(SPR_CYCLE_LOW) -#else -static inline cycles_t get_cycles(void) -{ - return __insn_mfspr(SPR_CYCLE); -} -#define get_cycles_low() __insn_mfspr(SPR_CYCLE) /* just get all 64 bits */ -#endif - -cycles_t get_clock_rate(void); - -/* Convert nanoseconds to core clock cycles. */ -cycles_t ns2cycles(unsigned long nsecs); - -/* Called at cpu initialization to set some low-level constants. */ -void setup_clock(void); - -/* Called at cpu initialization to start the tile-timer clock device. */ -void setup_tile_timer(void); - -#endif /* _ASM_TILE_TIMEX_H */ diff --git a/arch/tile/include/asm/tlb.h b/arch/tile/include/asm/tlb.h deleted file mode 100644 index 4a891a1a8df3..000000000000 --- a/arch/tile/include/asm/tlb.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_TLB_H -#define _ASM_TILE_TLB_H - -#define tlb_start_vma(tlb, vma) do { } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) -#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -#include <asm-generic/tlb.h> - -#endif /* _ASM_TILE_TLB_H */ diff --git a/arch/tile/include/asm/tlbflush.h b/arch/tile/include/asm/tlbflush.h deleted file mode 100644 index dcf91b25a1e5..000000000000 --- a/arch/tile/include/asm/tlbflush.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_TLBFLUSH_H -#define _ASM_TILE_TLBFLUSH_H - -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/smp.h> -#include <asm/cacheflush.h> -#include <asm/page.h> -#include <hv/hypervisor.h> - -/* - * Rather than associating each mm with its own ASID, we just use - * ASIDs to allow us to lazily flush the TLB when we switch mms. - * This way we only have to do an actual TLB flush on mm switch - * every time we wrap ASIDs, not every single time we switch. - * - * FIXME: We might improve performance by keeping ASIDs around - * properly, though since the hypervisor direct-maps VAs to TSB - * entries, we're likely to have lost at least the executable page - * mappings by the time we switch back to the original mm. - */ -DECLARE_PER_CPU(int, current_asid); - -/* The hypervisor tells us what ASIDs are available to us. */ -extern int min_asid, max_asid; - -/* Pass as vma pointer for non-executable mapping, if no vma available. */ -#define FLUSH_NONEXEC ((struct vm_area_struct *)-1UL) - -/* Flush a single user page on this cpu. */ -static inline void local_flush_tlb_page(struct vm_area_struct *vma, - unsigned long addr, - unsigned long page_size) -{ - int rc = hv_flush_page(addr, page_size); - if (rc < 0) - panic("hv_flush_page(%#lx,%#lx) failed: %d", - addr, page_size, rc); - if (!vma || (vma != FLUSH_NONEXEC && (vma->vm_flags & VM_EXEC))) - __flush_icache(); -} - -/* Flush range of user pages on this cpu. */ -static inline void local_flush_tlb_pages(struct vm_area_struct *vma, - unsigned long addr, - unsigned long page_size, - unsigned long len) -{ - int rc = hv_flush_pages(addr, page_size, len); - if (rc < 0) - panic("hv_flush_pages(%#lx,%#lx,%#lx) failed: %d", - addr, page_size, len, rc); - if (!vma || (vma != FLUSH_NONEXEC && (vma->vm_flags & VM_EXEC))) - __flush_icache(); -} - -/* Flush all user pages on this cpu. */ -static inline void local_flush_tlb(void) -{ - int rc = hv_flush_all(1); /* preserve global mappings */ - if (rc < 0) - panic("hv_flush_all(1) failed: %d", rc); - __flush_icache(); -} - -/* - * Global pages have to be flushed a bit differently. Not a real - * performance problem because this does not happen often. - */ -static inline void local_flush_tlb_all(void) -{ - int i; - for (i = 0; ; ++i) { - HV_VirtAddrRange r = hv_inquire_virtual(i); - if (r.size == 0) - break; - local_flush_tlb_pages(NULL, r.start, PAGE_SIZE, r.size); - local_flush_tlb_pages(NULL, r.start, HPAGE_SIZE, r.size); - } -} - -/* - * TLB flushing: - * - * - flush_tlb() flushes the current mm struct TLBs - * - flush_tlb_all() flushes all processes TLBs - * - flush_tlb_mm(mm) flushes the specified mm context TLB's - * - flush_tlb_page(vma, vmaddr) flushes one page - * - flush_tlb_range(vma, start, end) flushes a range of pages - * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages - * - flush_tlb_others(cpumask, mm, va) flushes TLBs on other cpus - * - * Here (as in vm_area_struct), "end" means the first byte after - * our end address. - */ - -extern void flush_tlb_all(void); -extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); -extern void flush_tlb_current_task(void); -extern void flush_tlb_mm(struct mm_struct *); -extern void flush_tlb_page(struct vm_area_struct *, unsigned long); -extern void flush_tlb_page_mm(struct vm_area_struct *, - struct mm_struct *, unsigned long); -extern void flush_tlb_range(struct vm_area_struct *, - unsigned long start, unsigned long end); - -#define flush_tlb() flush_tlb_current_task() - -#endif /* _ASM_TILE_TLBFLUSH_H */ diff --git a/arch/tile/include/asm/topology.h b/arch/tile/include/asm/topology.h deleted file mode 100644 index 635a0a4596f0..000000000000 --- a/arch/tile/include/asm/topology.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_TOPOLOGY_H -#define _ASM_TILE_TOPOLOGY_H - -#ifdef CONFIG_NUMA - -#include <linux/cpumask.h> - -/* Mappings between logical cpu number and node number. */ -extern struct cpumask node_2_cpu_mask[]; -extern char cpu_2_node[]; - -/* Returns the number of the node containing CPU 'cpu'. */ -static inline int cpu_to_node(int cpu) -{ - return cpu_2_node[cpu]; -} - -/* Returns a bitmask of CPUs on Node 'node'. */ -static inline const struct cpumask *cpumask_of_node(int node) -{ - return &node_2_cpu_mask[node]; -} - -/* For now, use numa node -1 for global allocation. */ -#define pcibus_to_node(bus) ((void)(bus), -1) - -#endif /* CONFIG_NUMA */ - -#include <asm-generic/topology.h> - -#ifdef CONFIG_SMP -#define topology_physical_package_id(cpu) ((void)(cpu), 0) -#define topology_core_id(cpu) (cpu) -#define topology_core_cpumask(cpu) ((void)(cpu), cpu_online_mask) -#define topology_sibling_cpumask(cpu) cpumask_of(cpu) -#endif - -#endif /* _ASM_TILE_TOPOLOGY_H */ diff --git a/arch/tile/include/asm/traps.h b/arch/tile/include/asm/traps.h deleted file mode 100644 index 11c82270c1f5..000000000000 --- a/arch/tile/include/asm/traps.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_TRAPS_H -#define _ASM_TILE_TRAPS_H - -#ifndef __ASSEMBLY__ -#include <arch/chip.h> - -/* mm/fault.c */ -void do_page_fault(struct pt_regs *, int fault_num, - unsigned long address, unsigned long write); -#if CHIP_HAS_TILE_DMA() -void do_async_page_fault(struct pt_regs *); -#endif - -#ifndef __tilegx__ -/* - * We return this structure in registers to avoid having to write - * additional save/restore code in the intvec.S caller. - */ -struct intvec_state { - void *handler; - unsigned long vecnum; - unsigned long fault_num; - unsigned long info; - unsigned long retval; -}; -struct intvec_state do_page_fault_ics(struct pt_regs *regs, int fault_num, - unsigned long address, - unsigned long info); -#endif - -/* kernel/traps.c */ -void do_trap(struct pt_regs *, int fault_num, unsigned long reason); -void kernel_double_fault(int dummy, ulong pc, ulong lr, ulong sp, ulong r52); - -/* kernel/time.c */ -void do_timer_interrupt(struct pt_regs *, int fault_num); - -/* kernel/messaging.c */ -void hv_message_intr(struct pt_regs *, int intnum); - -#define TILE_NMI_DUMP_STACK 1 /* Dump stack for sysrq+'l' */ - -/* kernel/process.c */ -void do_nmi_dump_stack(struct pt_regs *regs); - -/* kernel/traps.c */ -void do_nmi(struct pt_regs *, int fault_num, unsigned long reason); - -/* kernel/irq.c */ -void tile_dev_intr(struct pt_regs *, int intnum); - -#ifdef CONFIG_HARDWALL -/* kernel/hardwall.c */ -void do_hardwall_trap(struct pt_regs *, int fault_num); -#endif - -/* kernel/ptrace.c */ -void do_breakpoint(struct pt_regs *, int fault_num); - - -#ifdef __tilegx__ -/* kernel/single_step.c */ -void gx_singlestep_handle(struct pt_regs *, int fault_num); - -/* kernel/intvec_64.S */ -void fill_ra_stack(void); - -/* Handle unalign data fixup. */ -extern void do_unaligned(struct pt_regs *regs, int vecnum); -#endif - -#endif /* __ASSEMBLY__ */ - -#ifdef __tilegx__ -/* 128 byte JIT per unalign fixup. */ -#define UNALIGN_JIT_SHIFT 7 -#endif - -#endif /* _ASM_TILE_TRAPS_H */ diff --git a/arch/tile/include/asm/uaccess.h b/arch/tile/include/asm/uaccess.h deleted file mode 100644 index cb4fbe7e4f88..000000000000 --- a/arch/tile/include/asm/uaccess.h +++ /dev/null @@ -1,411 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_UACCESS_H -#define _ASM_TILE_UACCESS_H - -/* - * User space memory access functions - */ -#include <linux/mm.h> -#include <asm/processor.h> -#include <asm/page.h> - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - */ -#define MAKE_MM_SEG(a) ((mm_segment_t) { (a) }) - -#define KERNEL_DS MAKE_MM_SEG(-1UL) -#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) - -#define segment_eq(a, b) ((a).seg == (b).seg) - -#ifndef __tilegx__ -/* - * We could allow mapping all 16 MB at 0xfc000000, but we set up a - * special hack in arch_setup_additional_pages() to auto-create a mapping - * for the first 16 KB, and it would seem strange to have different - * user-accessible semantics for memory at 0xfc000000 and above 0xfc004000. - */ -static inline int is_arch_mappable_range(unsigned long addr, - unsigned long size) -{ - return (addr >= MEM_USER_INTRPT && - addr < (MEM_USER_INTRPT + INTRPT_SIZE) && - size <= (MEM_USER_INTRPT + INTRPT_SIZE) - addr); -} -#define is_arch_mappable_range is_arch_mappable_range -#else -#define is_arch_mappable_range(addr, size) 0 -#endif - -/* - * Note that using this definition ignores is_arch_mappable_range(), - * so on tilepro code that uses user_addr_max() is constrained not - * to reference the tilepro user-interrupt region. - */ -#define user_addr_max() (current_thread_info()->addr_limit.seg) - -/* - * Test whether a block of memory is a valid user space address. - * Returns 0 if the range is valid, nonzero otherwise. - */ -int __range_ok(unsigned long addr, unsigned long size); - -/** - * access_ok: - Checks if a user space pointer is valid - * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that - * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe - * to write to a block, it is always safe to read from it. - * @addr: User space pointer to start of block to check - * @size: Size of block to check - * - * Context: User context only. This function may sleep if pagefaults are - * enabled. - * - * Checks if a pointer to a block of memory in user space is valid. - * - * Returns true (nonzero) if the memory block may be valid, false (zero) - * if it is definitely invalid. - * - * Note that, depending on architecture, this function probably just - * checks that the pointer is in the user space range - after calling - * this function, memory access functions may still return -EFAULT. - */ -#define access_ok(type, addr, size) ({ \ - __chk_user_ptr(addr); \ - likely(__range_ok((unsigned long)(addr), (size)) == 0); \ -}) - -#include <asm/extable.h> - -/* - * This is a type: either unsigned long, if the argument fits into - * that type, or otherwise unsigned long long. - */ -#define __inttype(x) \ - __typeof__(__builtin_choose_expr(sizeof(x) > sizeof(0UL), 0ULL, 0UL)) - -/* - * Support macros for __get_user(). - * Note that __get_user() and __put_user() assume proper alignment. - */ - -#ifdef __LP64__ -#define _ASM_PTR ".quad" -#define _ASM_ALIGN ".align 8" -#else -#define _ASM_PTR ".long" -#define _ASM_ALIGN ".align 4" -#endif - -#define __get_user_asm(OP, x, ptr, ret) \ - asm volatile("1: {" #OP " %1, %2; movei %0, 0 }\n" \ - ".pushsection .fixup,\"ax\"\n" \ - "0: { movei %1, 0; movei %0, %3 }\n" \ - "j 9f\n" \ - ".section __ex_table,\"a\"\n" \ - _ASM_ALIGN "\n" \ - _ASM_PTR " 1b, 0b\n" \ - ".popsection\n" \ - "9:" \ - : "=r" (ret), "=r" (x) \ - : "r" (ptr), "i" (-EFAULT)) - -#ifdef __tilegx__ -#define __get_user_1(x, ptr, ret) __get_user_asm(ld1u, x, ptr, ret) -#define __get_user_2(x, ptr, ret) __get_user_asm(ld2u, x, ptr, ret) -#define __get_user_4(x, ptr, ret) __get_user_asm(ld4s, x, ptr, ret) -#define __get_user_8(x, ptr, ret) __get_user_asm(ld, x, ptr, ret) -#else -#define __get_user_1(x, ptr, ret) __get_user_asm(lb_u, x, ptr, ret) -#define __get_user_2(x, ptr, ret) __get_user_asm(lh_u, x, ptr, ret) -#define __get_user_4(x, ptr, ret) __get_user_asm(lw, x, ptr, ret) -#ifdef __LITTLE_ENDIAN -#define __lo32(a, b) a -#define __hi32(a, b) b -#else -#define __lo32(a, b) b -#define __hi32(a, b) a -#endif -#define __get_user_8(x, ptr, ret) \ - ({ \ - unsigned int __a, __b; \ - asm volatile("1: { lw %1, %3; addi %2, %3, 4 }\n" \ - "2: { lw %2, %2; movei %0, 0 }\n" \ - ".pushsection .fixup,\"ax\"\n" \ - "0: { movei %1, 0; movei %2, 0 }\n" \ - "{ movei %0, %4; j 9f }\n" \ - ".section __ex_table,\"a\"\n" \ - ".align 4\n" \ - ".word 1b, 0b\n" \ - ".word 2b, 0b\n" \ - ".popsection\n" \ - "9:" \ - : "=r" (ret), "=r" (__a), "=&r" (__b) \ - : "r" (ptr), "i" (-EFAULT)); \ - (x) = (__force __typeof(x))(__inttype(x)) \ - (((u64)__hi32(__a, __b) << 32) | \ - __lo32(__a, __b)); \ - }) -#endif - -extern int __get_user_bad(void) - __attribute__((warning("sizeof __get_user argument not 1, 2, 4 or 8"))); - -/** - * __get_user: - Get a simple variable from user space, with less checking. - * @x: Variable to store result. - * @ptr: Source address, in user space. - * - * Context: User context only. This function may sleep if pagefaults are - * enabled. - * - * This macro copies a single simple variable from user space to kernel - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and the result of - * dereferencing @ptr must be assignable to @x without a cast. - * - * Returns zero on success, or -EFAULT on error. - * On error, the variable @x is set to zero. - * - * Caller must check the pointer with access_ok() before calling this - * function. - */ -#define __get_user(x, ptr) \ - ({ \ - int __ret; \ - typeof(x) _x; \ - __chk_user_ptr(ptr); \ - switch (sizeof(*(ptr))) { \ - case 1: __get_user_1(_x, ptr, __ret); break; \ - case 2: __get_user_2(_x, ptr, __ret); break; \ - case 4: __get_user_4(_x, ptr, __ret); break; \ - case 8: __get_user_8(_x, ptr, __ret); break; \ - default: __ret = __get_user_bad(); break; \ - } \ - (x) = (typeof(*(ptr))) _x; \ - __ret; \ - }) - -/* Support macros for __put_user(). */ - -#define __put_user_asm(OP, x, ptr, ret) \ - asm volatile("1: {" #OP " %1, %2; movei %0, 0 }\n" \ - ".pushsection .fixup,\"ax\"\n" \ - "0: { movei %0, %3; j 9f }\n" \ - ".section __ex_table,\"a\"\n" \ - _ASM_ALIGN "\n" \ - _ASM_PTR " 1b, 0b\n" \ - ".popsection\n" \ - "9:" \ - : "=r" (ret) \ - : "r" (ptr), "r" (x), "i" (-EFAULT)) - -#ifdef __tilegx__ -#define __put_user_1(x, ptr, ret) __put_user_asm(st1, x, ptr, ret) -#define __put_user_2(x, ptr, ret) __put_user_asm(st2, x, ptr, ret) -#define __put_user_4(x, ptr, ret) __put_user_asm(st4, x, ptr, ret) -#define __put_user_8(x, ptr, ret) __put_user_asm(st, x, ptr, ret) -#else -#define __put_user_1(x, ptr, ret) __put_user_asm(sb, x, ptr, ret) -#define __put_user_2(x, ptr, ret) __put_user_asm(sh, x, ptr, ret) -#define __put_user_4(x, ptr, ret) __put_user_asm(sw, x, ptr, ret) -#define __put_user_8(x, ptr, ret) \ - ({ \ - u64 __x = (__force __inttype(x))(x); \ - int __lo = (int) __x, __hi = (int) (__x >> 32); \ - asm volatile("1: { sw %1, %2; addi %0, %1, 4 }\n" \ - "2: { sw %0, %3; movei %0, 0 }\n" \ - ".pushsection .fixup,\"ax\"\n" \ - "0: { movei %0, %4; j 9f }\n" \ - ".section __ex_table,\"a\"\n" \ - ".align 4\n" \ - ".word 1b, 0b\n" \ - ".word 2b, 0b\n" \ - ".popsection\n" \ - "9:" \ - : "=&r" (ret) \ - : "r" (ptr), "r" (__lo32(__lo, __hi)), \ - "r" (__hi32(__lo, __hi)), "i" (-EFAULT)); \ - }) -#endif - -extern int __put_user_bad(void) - __attribute__((warning("sizeof __put_user argument not 1, 2, 4 or 8"))); - -/** - * __put_user: - Write a simple value into user space, with less checking. - * @x: Value to copy to user space. - * @ptr: Destination address, in user space. - * - * Context: User context only. This function may sleep if pagefaults are - * enabled. - * - * This macro copies a single simple value from kernel space to user - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and @x must be assignable - * to the result of dereferencing @ptr. - * - * Caller must check the pointer with access_ok() before calling this - * function. - * - * Returns zero on success, or -EFAULT on error. - */ -#define __put_user(x, ptr) \ -({ \ - int __ret; \ - typeof(*(ptr)) _x = (x); \ - __chk_user_ptr(ptr); \ - switch (sizeof(*(ptr))) { \ - case 1: __put_user_1(_x, ptr, __ret); break; \ - case 2: __put_user_2(_x, ptr, __ret); break; \ - case 4: __put_user_4(_x, ptr, __ret); break; \ - case 8: __put_user_8(_x, ptr, __ret); break; \ - default: __ret = __put_user_bad(); break; \ - } \ - __ret; \ -}) - -/* - * The versions of get_user and put_user without initial underscores - * check the address of their arguments to make sure they are not - * in kernel space. - */ -#define put_user(x, ptr) \ -({ \ - __typeof__(*(ptr)) __user *__Pu_addr = (ptr); \ - access_ok(VERIFY_WRITE, (__Pu_addr), sizeof(*(__Pu_addr))) ? \ - __put_user((x), (__Pu_addr)) : \ - -EFAULT; \ -}) - -#define get_user(x, ptr) \ -({ \ - __typeof__(*(ptr)) const __user *__Gu_addr = (ptr); \ - access_ok(VERIFY_READ, (__Gu_addr), sizeof(*(__Gu_addr))) ? \ - __get_user((x), (__Gu_addr)) : \ - ((x) = 0, -EFAULT); \ -}) - -extern unsigned long __must_check -raw_copy_to_user(void __user *to, const void *from, unsigned long n); -extern unsigned long __must_check -raw_copy_from_user(void *to, const void __user *from, unsigned long n); -#define INLINE_COPY_FROM_USER -#define INLINE_COPY_TO_USER - -#ifdef __tilegx__ -extern unsigned long raw_copy_in_user( - void __user *to, const void __user *from, unsigned long n); -#endif - - -extern long strnlen_user(const char __user *str, long n); -extern long strncpy_from_user(char *dst, const char __user *src, long); - -/** - * clear_user: - Zero a block of memory in user space. - * @mem: Destination address, in user space. - * @len: Number of bytes to zero. - * - * Zero a block of memory in user space. - * - * Returns number of bytes that could not be cleared. - * On success, this will be zero. - */ -extern unsigned long clear_user_asm(void __user *mem, unsigned long len); -static inline unsigned long __must_check __clear_user( - void __user *mem, unsigned long len) -{ - might_fault(); - return clear_user_asm(mem, len); -} -static inline unsigned long __must_check clear_user( - void __user *mem, unsigned long len) -{ - if (access_ok(VERIFY_WRITE, mem, len)) - return __clear_user(mem, len); - return len; -} - -/** - * flush_user: - Flush a block of memory in user space from cache. - * @mem: Destination address, in user space. - * @len: Number of bytes to flush. - * - * Returns number of bytes that could not be flushed. - * On success, this will be zero. - */ -extern unsigned long flush_user_asm(void __user *mem, unsigned long len); -static inline unsigned long __must_check __flush_user( - void __user *mem, unsigned long len) -{ - int retval; - - might_fault(); - retval = flush_user_asm(mem, len); - mb_incoherent(); - return retval; -} - -static inline unsigned long __must_check flush_user( - void __user *mem, unsigned long len) -{ - if (access_ok(VERIFY_WRITE, mem, len)) - return __flush_user(mem, len); - return len; -} - -/** - * finv_user: - Flush-inval a block of memory in user space from cache. - * @mem: Destination address, in user space. - * @len: Number of bytes to invalidate. - * - * Returns number of bytes that could not be flush-invalidated. - * On success, this will be zero. - */ -extern unsigned long finv_user_asm(void __user *mem, unsigned long len); -static inline unsigned long __must_check __finv_user( - void __user *mem, unsigned long len) -{ - int retval; - - might_fault(); - retval = finv_user_asm(mem, len); - mb_incoherent(); - return retval; -} -static inline unsigned long __must_check finv_user( - void __user *mem, unsigned long len) -{ - if (access_ok(VERIFY_WRITE, mem, len)) - return __finv_user(mem, len); - return len; -} - -#endif /* _ASM_TILE_UACCESS_H */ diff --git a/arch/tile/include/asm/unaligned.h b/arch/tile/include/asm/unaligned.h deleted file mode 100644 index 5a58a0d11449..000000000000 --- a/arch/tile/include/asm/unaligned.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_UNALIGNED_H -#define _ASM_TILE_UNALIGNED_H - -/* - * We could implement faster get_unaligned_[be/le]64 using the ldna - * instruction on tilegx; however, we need to either copy all of the - * other generic functions to here (which is pretty ugly) or else - * modify both the generic code and other arch code to allow arch - * specific unaligned data access functions. Given these functions - * are not often called, we'll stick with the generic version. - */ -#include <asm-generic/unaligned.h> - -/* - * Is the kernel doing fixups of unaligned accesses? If <0, no kernel - * intervention occurs and SIGBUS is delivered with no data address - * info. If 0, the kernel single-steps the instruction to discover - * the data address to provide with the SIGBUS. If 1, the kernel does - * a fixup. - */ -extern int unaligned_fixup; - -/* Is the kernel printing on each unaligned fixup? */ -extern int unaligned_printk; - -/* Number of unaligned fixups performed */ -extern unsigned int unaligned_fixup_count; - -#endif /* _ASM_TILE_UNALIGNED_H */ diff --git a/arch/tile/include/asm/unistd.h b/arch/tile/include/asm/unistd.h deleted file mode 100644 index 940831fe9e94..000000000000 --- a/arch/tile/include/asm/unistd.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ -/* In compat mode, we use sys_llseek() for compat_sys_llseek(). */ -#ifdef CONFIG_COMPAT -#define __ARCH_WANT_SYS_LLSEEK -#endif -#define __ARCH_WANT_SYS_NEWFSTATAT -#define __ARCH_WANT_SYS_CLONE -#include <uapi/asm/unistd.h> diff --git a/arch/tile/include/asm/user.h b/arch/tile/include/asm/user.h deleted file mode 100644 index cbc8b4d5a5ce..000000000000 --- a/arch/tile/include/asm/user.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - */ - -#ifndef _ASM_TILE_USER_H -#define _ASM_TILE_USER_H - -/* This header is for a.out file formats, which TILE does not support. */ - -#endif /* _ASM_TILE_USER_H */ diff --git a/arch/tile/include/asm/vdso.h b/arch/tile/include/asm/vdso.h deleted file mode 100644 index 9b069692153f..000000000000 --- a/arch/tile/include/asm/vdso.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef __TILE_VDSO_H__ -#define __TILE_VDSO_H__ - -#include <linux/seqlock.h> -#include <linux/types.h> - -/* - * Note about the vdso_data structure: - * - * NEVER USE THEM IN USERSPACE CODE DIRECTLY. The layout of the - * structure is supposed to be known only to the function in the vdso - * itself and may change without notice. - */ - -struct vdso_data { - seqcount_t tz_seq; /* Timezone seqlock */ - seqcount_t tb_seq; /* Timebase seqlock */ - __u64 cycle_last; /* TOD clock for xtime */ - __u64 mask; /* Cycle mask */ - __u32 mult; /* Cycle to nanosecond multiplier */ - __u32 shift; /* Cycle to nanosecond divisor (power of two) */ - __u64 wall_time_sec; - __u64 wall_time_snsec; - __u64 monotonic_time_sec; - __u64 monotonic_time_snsec; - __u64 wall_time_coarse_sec; - __u64 wall_time_coarse_nsec; - __u64 monotonic_time_coarse_sec; - __u64 monotonic_time_coarse_nsec; - __u32 tz_minuteswest; /* Minutes west of Greenwich */ - __u32 tz_dsttime; /* Type of dst correction */ -}; - -extern struct vdso_data *vdso_data; - -/* __vdso_rt_sigreturn is defined with the addresses in the vdso page. */ -extern void __vdso_rt_sigreturn(void); - -extern int setup_vdso_pages(void); - -#endif /* __TILE_VDSO_H__ */ diff --git a/arch/tile/include/asm/vga.h b/arch/tile/include/asm/vga.h deleted file mode 100644 index 7b46e754d611..000000000000 --- a/arch/tile/include/asm/vga.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Access to VGA videoram. - */ - -#ifndef _ASM_TILE_VGA_H -#define _ASM_TILE_VGA_H - -#include <asm/io.h> - -#define VT_BUF_HAVE_RW - -static inline void scr_writew(u16 val, volatile u16 *addr) -{ - __raw_writew(val, (volatile u16 __iomem *) addr); -} - -static inline u16 scr_readw(volatile const u16 *addr) -{ - return __raw_readw((volatile const u16 __iomem *) addr); -} - -#define vga_readb(a) readb((u8 __iomem *)(a)) -#define vga_writeb(v,a) writeb(v, (u8 __iomem *)(a)) - -#define VGA_MAP_MEM(x,s) ((unsigned long) ioremap(x, s)) - -#endif diff --git a/arch/tile/include/asm/word-at-a-time.h b/arch/tile/include/asm/word-at-a-time.h deleted file mode 100644 index 2f2515867760..000000000000 --- a/arch/tile/include/asm/word-at-a-time.h +++ /dev/null @@ -1,43 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_WORD_AT_A_TIME_H -#define _ASM_WORD_AT_A_TIME_H - -#include <asm/byteorder.h> - -struct word_at_a_time { /* unused */ }; -#define WORD_AT_A_TIME_CONSTANTS {} - -/* Generate 0x01 byte values for zero bytes using a SIMD instruction. */ -static inline unsigned long has_zero(unsigned long val, unsigned long *data, - const struct word_at_a_time *c) -{ -#ifdef __tilegx__ - unsigned long mask = __insn_v1cmpeqi(val, 0); -#else /* tilepro */ - unsigned long mask = __insn_seqib(val, 0); -#endif - *data = mask; - return mask; -} - -/* These operations are both nops. */ -#define prep_zero_mask(val, data, c) (data) -#define create_zero_mask(data) (data) - -/* And this operation just depends on endianness. */ -static inline long find_zero(unsigned long mask) -{ -#ifdef __BIG_ENDIAN - return __builtin_clzl(mask) >> 3; -#else - return __builtin_ctzl(mask) >> 3; -#endif -} - -#ifdef __BIG_ENDIAN -#define zero_bytemask(mask) (~1ul << (63 - __builtin_clzl(mask))) -#else -#define zero_bytemask(mask) ((2ul << __builtin_ctzl(mask)) - 1) -#endif - -#endif /* _ASM_WORD_AT_A_TIME_H */ diff --git a/arch/tile/include/gxio/common.h b/arch/tile/include/gxio/common.h deleted file mode 100644 index 724595a24d04..000000000000 --- a/arch/tile/include/gxio/common.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _GXIO_COMMON_H_ -#define _GXIO_COMMON_H_ - -/* - * Routines shared between the various GXIO device components. - */ - -#include <hv/iorpc.h> - -#include <linux/types.h> -#include <linux/compiler.h> -#include <linux/io.h> - -/* Define the standard gxio MMIO functions using kernel functions. */ -#define __gxio_mmio_read8(addr) readb(addr) -#define __gxio_mmio_read16(addr) readw(addr) -#define __gxio_mmio_read32(addr) readl(addr) -#define __gxio_mmio_read64(addr) readq(addr) -#define __gxio_mmio_write8(addr, val) writeb((val), (addr)) -#define __gxio_mmio_write16(addr, val) writew((val), (addr)) -#define __gxio_mmio_write32(addr, val) writel((val), (addr)) -#define __gxio_mmio_write64(addr, val) writeq((val), (addr)) -#define __gxio_mmio_read(addr) __gxio_mmio_read64(addr) -#define __gxio_mmio_write(addr, val) __gxio_mmio_write64((addr), (val)) - -#endif /* !_GXIO_COMMON_H_ */ diff --git a/arch/tile/include/gxio/dma_queue.h b/arch/tile/include/gxio/dma_queue.h deleted file mode 100644 index c8fd47edba30..000000000000 --- a/arch/tile/include/gxio/dma_queue.h +++ /dev/null @@ -1,161 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _GXIO_DMA_QUEUE_H_ -#define _GXIO_DMA_QUEUE_H_ - -/* - * DMA queue management APIs shared between TRIO and mPIPE. - */ - -#include <gxio/common.h> - -/* The credit counter lives in the high 32 bits. */ -#define DMA_QUEUE_CREDIT_SHIFT 32 - -/* - * State object that tracks a DMA queue's head and tail indices, as - * well as the number of commands posted and completed. The - * structure is accessed via a thread-safe, lock-free algorithm. - */ -typedef struct { - /* - * Address of a MPIPE_EDMA_POST_REGION_VAL_t, - * TRIO_PUSH_DMA_REGION_VAL_t, or TRIO_PULL_DMA_REGION_VAL_t - * register. These register have identical encodings and provide - * information about how many commands have been processed. - */ - void *post_region_addr; - - /* - * A lazily-updated count of how many edescs the hardware has - * completed. - */ - uint64_t hw_complete_count __attribute__ ((aligned(64))); - - /* - * High 32 bits are a count of available egress command credits, - * low 24 bits are the next egress "slot". - */ - int64_t credits_and_next_index; - -} __gxio_dma_queue_t; - -/* Initialize a dma queue. */ -extern void __gxio_dma_queue_init(__gxio_dma_queue_t *dma_queue, - void *post_region_addr, - unsigned int num_entries); - -/* - * Update the "credits_and_next_index" and "hw_complete_count" fields - * based on pending hardware completions. Note that some other thread - * may have already done this and, importantly, may still be in the - * process of updating "credits_and_next_index". - */ -extern void __gxio_dma_queue_update_credits(__gxio_dma_queue_t *dma_queue); - -/* Wait for credits to become available. */ -extern int64_t __gxio_dma_queue_wait_for_credits(__gxio_dma_queue_t *dma_queue, - int64_t modifier); - -/* Reserve slots in the queue, optionally waiting for slots to become - * available, and optionally returning a "completion_slot" suitable for - * direct comparison to "hw_complete_count". - */ -static inline int64_t __gxio_dma_queue_reserve(__gxio_dma_queue_t *dma_queue, - unsigned int num, bool wait, - bool completion) -{ - uint64_t slot; - - /* - * Try to reserve 'num' egress command slots. We do this by - * constructing a constant that subtracts N credits and adds N to - * the index, and using fetchaddgez to only apply it if the credits - * count doesn't go negative. - */ - int64_t modifier = (((int64_t)(-num)) << DMA_QUEUE_CREDIT_SHIFT) | num; - int64_t old = - __insn_fetchaddgez(&dma_queue->credits_and_next_index, - modifier); - - if (unlikely(old + modifier < 0)) { - /* - * We're out of credits. Try once to get more by checking for - * completed egress commands. If that fails, wait or fail. - */ - __gxio_dma_queue_update_credits(dma_queue); - old = __insn_fetchaddgez(&dma_queue->credits_and_next_index, - modifier); - if (old + modifier < 0) { - if (wait) - old = __gxio_dma_queue_wait_for_credits - (dma_queue, modifier); - else - return GXIO_ERR_DMA_CREDITS; - } - } - - /* The bottom 24 bits of old encode the "slot". */ - slot = (old & 0xffffff); - - if (completion) { - /* - * A "completion_slot" is a "slot" which can be compared to - * "hw_complete_count" at any time in the future. To convert - * "slot" into a "completion_slot", we access "hw_complete_count" - * once (knowing that we have reserved a slot, and thus, it will - * be "basically" accurate), and combine its high 40 bits with - * the 24 bit "slot", and handle "wrapping" by adding "1 << 24" - * if the result is LESS than "hw_complete_count". - */ - uint64_t complete; - complete = READ_ONCE(dma_queue->hw_complete_count); - slot |= (complete & 0xffffffffff000000); - if (slot < complete) - slot += 0x1000000; - } - - /* - * If any of our slots mod 256 were equivalent to 0, go ahead and - * collect some egress credits, and update "hw_complete_count", and - * make sure the index doesn't overflow into the credits. - */ - if (unlikely(((old + num) & 0xff) < num)) { - __gxio_dma_queue_update_credits(dma_queue); - - /* Make sure the index doesn't overflow into the credits. */ -#ifdef __BIG_ENDIAN__ - *(((uint8_t *)&dma_queue->credits_and_next_index) + 4) = 0; -#else - *(((uint8_t *)&dma_queue->credits_and_next_index) + 3) = 0; -#endif - } - - return slot; -} - -/* Non-inlinable "__gxio_dma_queue_reserve(..., true)". */ -extern int64_t __gxio_dma_queue_reserve_aux(__gxio_dma_queue_t *dma_queue, - unsigned int num, int wait); - -/* Check whether a particular "completion slot" has completed. - * - * Note that this function requires a "completion slot", and thus - * cannot be used with the result of any "reserve_fast" function. - */ -extern int __gxio_dma_queue_is_complete(__gxio_dma_queue_t *dma_queue, - int64_t completion_slot, int update); - -#endif /* !_GXIO_DMA_QUEUE_H_ */ diff --git a/arch/tile/include/gxio/iorpc_globals.h b/arch/tile/include/gxio/iorpc_globals.h deleted file mode 100644 index 52c721f8dad9..000000000000 --- a/arch/tile/include/gxio/iorpc_globals.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* This file is machine-generated; DO NOT EDIT! */ -#ifndef __IORPC_LINUX_RPC_H__ -#define __IORPC_LINUX_RPC_H__ - -#include <hv/iorpc.h> - -#include <linux/string.h> -#include <linux/module.h> -#include <asm/pgtable.h> - -#define IORPC_OP_ARM_POLLFD IORPC_OPCODE(IORPC_FORMAT_KERNEL_POLLFD, 0x9000) -#define IORPC_OP_CLOSE_POLLFD IORPC_OPCODE(IORPC_FORMAT_KERNEL_POLLFD, 0x9001) -#define IORPC_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000) -#define IORPC_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001) - -int __iorpc_arm_pollfd(int fd, int pollfd_cookie); - -int __iorpc_close_pollfd(int fd, int pollfd_cookie); - -int __iorpc_get_mmio_base(int fd, HV_PTE *base); - -int __iorpc_check_mmio_offset(int fd, unsigned long offset, unsigned long size); - -#endif /* !__IORPC_LINUX_RPC_H__ */ diff --git a/arch/tile/include/gxio/iorpc_mpipe.h b/arch/tile/include/gxio/iorpc_mpipe.h deleted file mode 100644 index 4cda03de734f..000000000000 --- a/arch/tile/include/gxio/iorpc_mpipe.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* This file is machine-generated; DO NOT EDIT! */ -#ifndef __GXIO_MPIPE_LINUX_RPC_H__ -#define __GXIO_MPIPE_LINUX_RPC_H__ - -#include <hv/iorpc.h> - -#include <hv/drv_mpipe_intf.h> -#include <asm/page.h> -#include <gxio/kiorpc.h> -#include <gxio/mpipe.h> -#include <linux/string.h> -#include <linux/module.h> -#include <asm/pgtable.h> - -#define GXIO_MPIPE_OP_ALLOC_BUFFER_STACKS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1200) -#define GXIO_MPIPE_OP_INIT_BUFFER_STACK_AUX IORPC_OPCODE(IORPC_FORMAT_KERNEL_MEM, 0x1201) - -#define GXIO_MPIPE_OP_ALLOC_NOTIF_RINGS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1203) -#define GXIO_MPIPE_OP_INIT_NOTIF_RING_AUX IORPC_OPCODE(IORPC_FORMAT_KERNEL_MEM, 0x1204) -#define GXIO_MPIPE_OP_REQUEST_NOTIF_RING_INTERRUPT IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1205) -#define GXIO_MPIPE_OP_ENABLE_NOTIF_RING_INTERRUPT IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1206) -#define GXIO_MPIPE_OP_ALLOC_NOTIF_GROUPS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1207) -#define GXIO_MPIPE_OP_INIT_NOTIF_GROUP IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1208) -#define GXIO_MPIPE_OP_ALLOC_BUCKETS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1209) -#define GXIO_MPIPE_OP_INIT_BUCKET IORPC_OPCODE(IORPC_FORMAT_NONE, 0x120a) -#define GXIO_MPIPE_OP_ALLOC_EDMA_RINGS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x120b) -#define GXIO_MPIPE_OP_INIT_EDMA_RING_AUX IORPC_OPCODE(IORPC_FORMAT_KERNEL_MEM, 0x120c) - -#define GXIO_MPIPE_OP_COMMIT_RULES IORPC_OPCODE(IORPC_FORMAT_NONE, 0x120f) -#define GXIO_MPIPE_OP_REGISTER_CLIENT_MEMORY IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1210) -#define GXIO_MPIPE_OP_LINK_OPEN_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1211) -#define GXIO_MPIPE_OP_LINK_CLOSE_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1212) -#define GXIO_MPIPE_OP_LINK_SET_ATTR_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1213) - -#define GXIO_MPIPE_OP_GET_TIMESTAMP_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x121e) -#define GXIO_MPIPE_OP_SET_TIMESTAMP_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x121f) -#define GXIO_MPIPE_OP_ADJUST_TIMESTAMP_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1220) -#define GXIO_MPIPE_OP_CONFIG_EDMA_RING_BLKS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1221) -#define GXIO_MPIPE_OP_ADJUST_TIMESTAMP_FREQ IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1222) -#define GXIO_MPIPE_OP_ARM_POLLFD IORPC_OPCODE(IORPC_FORMAT_KERNEL_POLLFD, 0x9000) -#define GXIO_MPIPE_OP_CLOSE_POLLFD IORPC_OPCODE(IORPC_FORMAT_KERNEL_POLLFD, 0x9001) -#define GXIO_MPIPE_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000) -#define GXIO_MPIPE_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001) - -int gxio_mpipe_alloc_buffer_stacks(gxio_mpipe_context_t *context, - unsigned int count, unsigned int first, - unsigned int flags); - -int gxio_mpipe_init_buffer_stack_aux(gxio_mpipe_context_t *context, - void *mem_va, size_t mem_size, - unsigned int mem_flags, unsigned int stack, - unsigned int buffer_size_enum); - - -int gxio_mpipe_alloc_notif_rings(gxio_mpipe_context_t *context, - unsigned int count, unsigned int first, - unsigned int flags); - -int gxio_mpipe_init_notif_ring_aux(gxio_mpipe_context_t *context, void *mem_va, - size_t mem_size, unsigned int mem_flags, - unsigned int ring); - -int gxio_mpipe_request_notif_ring_interrupt(gxio_mpipe_context_t *context, - int inter_x, int inter_y, - int inter_ipi, int inter_event, - unsigned int ring); - -int gxio_mpipe_enable_notif_ring_interrupt(gxio_mpipe_context_t *context, - unsigned int ring); - -int gxio_mpipe_alloc_notif_groups(gxio_mpipe_context_t *context, - unsigned int count, unsigned int first, - unsigned int flags); - -int gxio_mpipe_init_notif_group(gxio_mpipe_context_t *context, - unsigned int group, - gxio_mpipe_notif_group_bits_t bits); - -int gxio_mpipe_alloc_buckets(gxio_mpipe_context_t *context, unsigned int count, - unsigned int first, unsigned int flags); - -int gxio_mpipe_init_bucket(gxio_mpipe_context_t *context, unsigned int bucket, - MPIPE_LBL_INIT_DAT_BSTS_TBL_t bucket_info); - -int gxio_mpipe_alloc_edma_rings(gxio_mpipe_context_t *context, - unsigned int count, unsigned int first, - unsigned int flags); - -int gxio_mpipe_init_edma_ring_aux(gxio_mpipe_context_t *context, void *mem_va, - size_t mem_size, unsigned int mem_flags, - unsigned int ring, unsigned int channel); - - -int gxio_mpipe_commit_rules(gxio_mpipe_context_t *context, const void *blob, - size_t blob_size); - -int gxio_mpipe_register_client_memory(gxio_mpipe_context_t *context, - unsigned int iotlb, HV_PTE pte, - unsigned int flags); - -int gxio_mpipe_link_open_aux(gxio_mpipe_context_t *context, - _gxio_mpipe_link_name_t name, unsigned int flags); - -int gxio_mpipe_link_close_aux(gxio_mpipe_context_t *context, int mac); - -int gxio_mpipe_link_set_attr_aux(gxio_mpipe_context_t *context, int mac, - uint32_t attr, int64_t val); - -int gxio_mpipe_get_timestamp_aux(gxio_mpipe_context_t *context, uint64_t *sec, - uint64_t *nsec, uint64_t *cycles); - -int gxio_mpipe_set_timestamp_aux(gxio_mpipe_context_t *context, uint64_t sec, - uint64_t nsec, uint64_t cycles); - -int gxio_mpipe_adjust_timestamp_aux(gxio_mpipe_context_t *context, - int64_t nsec); - -int gxio_mpipe_adjust_timestamp_freq(gxio_mpipe_context_t *context, - int32_t ppb); - -int gxio_mpipe_arm_pollfd(gxio_mpipe_context_t *context, int pollfd_cookie); - -int gxio_mpipe_close_pollfd(gxio_mpipe_context_t *context, int pollfd_cookie); - -int gxio_mpipe_get_mmio_base(gxio_mpipe_context_t *context, HV_PTE *base); - -int gxio_mpipe_check_mmio_offset(gxio_mpipe_context_t *context, - unsigned long offset, unsigned long size); - -#endif /* !__GXIO_MPIPE_LINUX_RPC_H__ */ diff --git a/arch/tile/include/gxio/iorpc_mpipe_info.h b/arch/tile/include/gxio/iorpc_mpipe_info.h deleted file mode 100644 index f0b04284468b..000000000000 --- a/arch/tile/include/gxio/iorpc_mpipe_info.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* This file is machine-generated; DO NOT EDIT! */ -#ifndef __GXIO_MPIPE_INFO_LINUX_RPC_H__ -#define __GXIO_MPIPE_INFO_LINUX_RPC_H__ - -#include <hv/iorpc.h> - -#include <hv/drv_mpipe_intf.h> -#include <asm/page.h> -#include <gxio/kiorpc.h> -#include <gxio/mpipe.h> -#include <linux/string.h> -#include <linux/module.h> -#include <asm/pgtable.h> - - -#define GXIO_MPIPE_INFO_OP_INSTANCE_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1250) -#define GXIO_MPIPE_INFO_OP_ENUMERATE_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1251) -#define GXIO_MPIPE_INFO_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000) -#define GXIO_MPIPE_INFO_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001) - - -int gxio_mpipe_info_instance_aux(gxio_mpipe_info_context_t *context, - _gxio_mpipe_link_name_t name); - -int gxio_mpipe_info_enumerate_aux(gxio_mpipe_info_context_t *context, - unsigned int idx, - _gxio_mpipe_link_name_t *name, - _gxio_mpipe_link_mac_t *mac); - -int gxio_mpipe_info_get_mmio_base(gxio_mpipe_info_context_t *context, - HV_PTE *base); - -int gxio_mpipe_info_check_mmio_offset(gxio_mpipe_info_context_t *context, - unsigned long offset, unsigned long size); - -#endif /* !__GXIO_MPIPE_INFO_LINUX_RPC_H__ */ diff --git a/arch/tile/include/gxio/iorpc_trio.h b/arch/tile/include/gxio/iorpc_trio.h deleted file mode 100644 index 376a4f771167..000000000000 --- a/arch/tile/include/gxio/iorpc_trio.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* This file is machine-generated; DO NOT EDIT! */ -#ifndef __GXIO_TRIO_LINUX_RPC_H__ -#define __GXIO_TRIO_LINUX_RPC_H__ - -#include <hv/iorpc.h> - -#include <hv/drv_trio_intf.h> -#include <gxio/trio.h> -#include <gxio/kiorpc.h> -#include <linux/string.h> -#include <linux/module.h> -#include <asm/pgtable.h> - -#define GXIO_TRIO_OP_DEALLOC_ASID IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1400) -#define GXIO_TRIO_OP_ALLOC_ASIDS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1401) - -#define GXIO_TRIO_OP_ALLOC_MEMORY_MAPS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1404) - -#define GXIO_TRIO_OP_ALLOC_SCATTER_QUEUES IORPC_OPCODE(IORPC_FORMAT_NONE, 0x140e) -#define GXIO_TRIO_OP_ALLOC_PIO_REGIONS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1412) - -#define GXIO_TRIO_OP_INIT_PIO_REGION_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1414) - -#define GXIO_TRIO_OP_INIT_MEMORY_MAP_MMU_AUX IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141e) -#define GXIO_TRIO_OP_GET_PORT_PROPERTY IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141f) -#define GXIO_TRIO_OP_CONFIG_LEGACY_INTR IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1420) -#define GXIO_TRIO_OP_CONFIG_MSI_INTR IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1421) - -#define GXIO_TRIO_OP_SET_MPS_MRS IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1423) -#define GXIO_TRIO_OP_FORCE_RC_LINK_UP IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1424) -#define GXIO_TRIO_OP_FORCE_EP_LINK_UP IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1425) -#define GXIO_TRIO_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000) -#define GXIO_TRIO_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001) - -int gxio_trio_alloc_asids(gxio_trio_context_t *context, unsigned int count, - unsigned int first, unsigned int flags); - - -int gxio_trio_alloc_memory_maps(gxio_trio_context_t *context, - unsigned int count, unsigned int first, - unsigned int flags); - - -int gxio_trio_alloc_scatter_queues(gxio_trio_context_t *context, - unsigned int count, unsigned int first, - unsigned int flags); - -int gxio_trio_alloc_pio_regions(gxio_trio_context_t *context, - unsigned int count, unsigned int first, - unsigned int flags); - -int gxio_trio_init_pio_region_aux(gxio_trio_context_t *context, - unsigned int pio_region, unsigned int mac, - uint32_t bus_address_hi, unsigned int flags); - - -int gxio_trio_init_memory_map_mmu_aux(gxio_trio_context_t *context, - unsigned int map, unsigned long va, - uint64_t size, unsigned int asid, - unsigned int mac, uint64_t bus_address, - unsigned int node, - unsigned int order_mode); - -int gxio_trio_get_port_property(gxio_trio_context_t *context, - struct pcie_trio_ports_property *trio_ports); - -int gxio_trio_config_legacy_intr(gxio_trio_context_t *context, int inter_x, - int inter_y, int inter_ipi, int inter_event, - unsigned int mac, unsigned int intx); - -int gxio_trio_config_msi_intr(gxio_trio_context_t *context, int inter_x, - int inter_y, int inter_ipi, int inter_event, - unsigned int mac, unsigned int mem_map, - uint64_t mem_map_base, uint64_t mem_map_limit, - unsigned int asid); - - -int gxio_trio_set_mps_mrs(gxio_trio_context_t *context, uint16_t mps, - uint16_t mrs, unsigned int mac); - -int gxio_trio_force_rc_link_up(gxio_trio_context_t *context, unsigned int mac); - -int gxio_trio_force_ep_link_up(gxio_trio_context_t *context, unsigned int mac); - -int gxio_trio_get_mmio_base(gxio_trio_context_t *context, HV_PTE *base); - -int gxio_trio_check_mmio_offset(gxio_trio_context_t *context, - unsigned long offset, unsigned long size); - -#endif /* !__GXIO_TRIO_LINUX_RPC_H__ */ diff --git a/arch/tile/include/gxio/iorpc_uart.h b/arch/tile/include/gxio/iorpc_uart.h deleted file mode 100644 index 55429d48ea56..000000000000 --- a/arch/tile/include/gxio/iorpc_uart.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Copyright 2013 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* This file is machine-generated; DO NOT EDIT! */ -#ifndef __GXIO_UART_LINUX_RPC_H__ -#define __GXIO_UART_LINUX_RPC_H__ - -#include <hv/iorpc.h> - -#include <hv/drv_uart_intf.h> -#include <gxio/uart.h> -#include <gxio/kiorpc.h> -#include <linux/string.h> -#include <linux/module.h> -#include <asm/pgtable.h> - -#define GXIO_UART_OP_CFG_INTERRUPT IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1900) -#define GXIO_UART_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000) -#define GXIO_UART_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001) - -int gxio_uart_cfg_interrupt(gxio_uart_context_t *context, int inter_x, - int inter_y, int inter_ipi, int inter_event); - -int gxio_uart_get_mmio_base(gxio_uart_context_t *context, HV_PTE *base); - -int gxio_uart_check_mmio_offset(gxio_uart_context_t *context, - unsigned long offset, unsigned long size); - -#endif /* !__GXIO_UART_LINUX_RPC_H__ */ diff --git a/arch/tile/include/gxio/iorpc_usb_host.h b/arch/tile/include/gxio/iorpc_usb_host.h deleted file mode 100644 index 79962a97de8e..000000000000 --- a/arch/tile/include/gxio/iorpc_usb_host.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* This file is machine-generated; DO NOT EDIT! */ -#ifndef __GXIO_USB_HOST_LINUX_RPC_H__ -#define __GXIO_USB_HOST_LINUX_RPC_H__ - -#include <hv/iorpc.h> - -#include <hv/drv_usb_host_intf.h> -#include <asm/page.h> -#include <gxio/kiorpc.h> -#include <gxio/usb_host.h> -#include <linux/string.h> -#include <linux/module.h> -#include <asm/pgtable.h> - -#define GXIO_USB_HOST_OP_CFG_INTERRUPT IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1800) -#define GXIO_USB_HOST_OP_REGISTER_CLIENT_MEMORY IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1801) -#define GXIO_USB_HOST_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000) -#define GXIO_USB_HOST_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001) - -int gxio_usb_host_cfg_interrupt(gxio_usb_host_context_t *context, int inter_x, - int inter_y, int inter_ipi, int inter_event); - -int gxio_usb_host_register_client_memory(gxio_usb_host_context_t *context, - HV_PTE pte, unsigned int flags); - -int gxio_usb_host_get_mmio_base(gxio_usb_host_context_t *context, - HV_PTE *base); - -int gxio_usb_host_check_mmio_offset(gxio_usb_host_context_t *context, - unsigned long offset, unsigned long size); - -#endif /* !__GXIO_USB_HOST_LINUX_RPC_H__ */ diff --git a/arch/tile/include/gxio/kiorpc.h b/arch/tile/include/gxio/kiorpc.h deleted file mode 100644 index ee5820979ff3..000000000000 --- a/arch/tile/include/gxio/kiorpc.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Support routines for kernel IORPC drivers. - */ - -#ifndef _GXIO_KIORPC_H -#define _GXIO_KIORPC_H - -#include <linux/types.h> -#include <asm/page.h> -#include <arch/chip.h> - -#if CHIP_HAS_MMIO() -void __iomem *iorpc_ioremap(int hv_fd, resource_size_t offset, - unsigned long size); -#endif - -#endif /* _GXIO_KIORPC_H */ diff --git a/arch/tile/include/gxio/mpipe.h b/arch/tile/include/gxio/mpipe.h deleted file mode 100644 index 73e83a187866..000000000000 --- a/arch/tile/include/gxio/mpipe.h +++ /dev/null @@ -1,1871 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _GXIO_MPIPE_H_ -#define _GXIO_MPIPE_H_ - -/* - * - * An API for allocating, configuring, and manipulating mPIPE hardware - * resources. - */ - -#include <gxio/common.h> -#include <gxio/dma_queue.h> - -#include <linux/time.h> - -#include <arch/mpipe_def.h> -#include <arch/mpipe_shm.h> - -#include <hv/drv_mpipe_intf.h> -#include <hv/iorpc.h> - -/* - * - * The TILE-Gx mPIPE&tm; shim provides Ethernet connectivity, packet - * classification, and packet load balancing services. The - * gxio_mpipe_ API, declared in <gxio/mpipe.h>, allows applications to - * allocate mPIPE IO channels, configure packet distribution - * parameters, and send and receive Ethernet packets. The API is - * designed to be a minimal wrapper around the mPIPE hardware, making - * system calls only where necessary to preserve inter-process - * protection guarantees. - * - * The APIs described below allow the programmer to allocate and - * configure mPIPE resources. As described below, the mPIPE is a - * single shared hardware device that provides partitionable resources - * that are shared between all applications in the system. The - * gxio_mpipe_ API allows userspace code to make resource request - * calls to the hypervisor, which in turns keeps track of the - * resources in use by all applications, maintains protection - * guarantees, and resets resources upon application shutdown. - * - * We strongly recommend reading the mPIPE section of the IO Device - * Guide (UG404) before working with this API. Most functions in the - * gxio_mpipe_ API are directly analogous to hardware interfaces and - * the documentation assumes that the reader understands those - * hardware interfaces. - * - * @section mpipe__ingress mPIPE Ingress Hardware Resources - * - * The mPIPE ingress hardware provides extensive hardware offload for - * tasks like packet header parsing, load balancing, and memory - * management. This section provides a brief introduction to the - * hardware components and the gxio_mpipe_ calls used to manage them; - * see the IO Device Guide for a much more detailed description of the - * mPIPE's capabilities. - * - * When a packet arrives at one of the mPIPE's Ethernet MACs, it is - * assigned a channel number indicating which MAC received it. It - * then proceeds through the following hardware pipeline: - * - * @subsection mpipe__classification Classification - * - * A set of classification processors run header parsing code on each - * incoming packet, extracting information including the destination - * MAC address, VLAN, Ethernet type, and five-tuple hash. Some of - * this information is then used to choose which buffer stack will be - * used to hold the packet, and which bucket will be used by the load - * balancer to determine which application will receive the packet. - * - * The rules by which the buffer stack and bucket are chosen can be - * configured via the @ref gxio_mpipe_classifier API. A given app can - * specify multiple rules, each one specifying a bucket range, and a - * set of buffer stacks, to be used for packets matching the rule. - * Each rule can optionally specify a restricted set of channels, - * VLANs, and/or dMACs, in which it is interested. By default, a - * given rule starts out matching all channels associated with the - * mPIPE context's set of open links; all VLANs; and all dMACs. - * Subsequent restrictions can then be added. - * - * @subsection mpipe__load_balancing Load Balancing - * - * The mPIPE load balancer is responsible for choosing the NotifRing - * to which the packet will be delivered. This decision is based on - * the bucket number indicated by the classification program. In - * general, the bucket number is based on some number of low bits of - * the packet's flow hash (applications that aren't interested in flow - * hashing use a single bucket). Each load balancer bucket keeps a - * record of the NotifRing to which packets directed to that bucket - * are currently being delivered. Based on the bucket's load - * balancing mode (@ref gxio_mpipe_bucket_mode_t), the load balancer - * either forwards the packet to the previously assigned NotifRing or - * decides to choose a new NotifRing. If a new NotifRing is required, - * the load balancer chooses the least loaded ring in the NotifGroup - * associated with the bucket. - * - * The load balancer is a shared resource. Each application needs to - * explicitly allocate NotifRings, NotifGroups, and buckets, using - * gxio_mpipe_alloc_notif_rings(), gxio_mpipe_alloc_notif_groups(), - * and gxio_mpipe_alloc_buckets(). Then the application needs to - * configure them using gxio_mpipe_init_notif_ring() and - * gxio_mpipe_init_notif_group_and_buckets(). - * - * @subsection mpipe__buffers Buffer Selection and Packet Delivery - * - * Once the load balancer has chosen the destination NotifRing, the - * mPIPE DMA engine pops at least one buffer off of the 'buffer stack' - * chosen by the classification program and DMAs the packet data into - * that buffer. Each buffer stack provides a hardware-accelerated - * stack of data buffers with the same size. If the packet data is - * larger than the buffers provided by the chosen buffer stack, the - * mPIPE hardware pops off multiple buffers and chains the packet data - * through a multi-buffer linked list. Once the packet data is - * delivered to the buffer(s), the mPIPE hardware writes the - * ::gxio_mpipe_idesc_t metadata object (calculated by the classifier) - * into the NotifRing and increments the number of packets delivered - * to that ring. - * - * Applications can push buffers onto a buffer stack by calling - * gxio_mpipe_push_buffer() or by egressing a packet with the - * ::gxio_mpipe_edesc_t::hwb bit set, indicating that the egressed - * buffers should be returned to the stack. - * - * Applications can allocate and initialize buffer stacks with the - * gxio_mpipe_alloc_buffer_stacks() and gxio_mpipe_init_buffer_stack() - * APIs. - * - * The application must also register the memory pages that will hold - * packets. This requires calling gxio_mpipe_register_page() for each - * memory page that will hold packets allocated by the application for - * a given buffer stack. Since each buffer stack is limited to 16 - * registered pages, it may be necessary to use huge pages, or even - * extremely huge pages, to hold all the buffers. - * - * @subsection mpipe__iqueue NotifRings - * - * Each NotifRing is a region of shared memory, allocated by the - * application, to which the mPIPE delivers packet descriptors - * (::gxio_mpipe_idesc_t). The application can allocate them via - * gxio_mpipe_alloc_notif_rings(). The application can then either - * explicitly initialize them with gxio_mpipe_init_notif_ring() and - * then read from them manually, or can make use of the convenience - * wrappers provided by @ref gxio_mpipe_wrappers. - * - * @section mpipe__egress mPIPE Egress Hardware - * - * Applications use eDMA rings to queue packets for egress. The - * application can allocate them via gxio_mpipe_alloc_edma_rings(). - * The application can then either explicitly initialize them with - * gxio_mpipe_init_edma_ring() and then write to them manually, or - * can make use of the convenience wrappers provided by - * @ref gxio_mpipe_wrappers. - * - * @section gxio__shortcomings Plans for Future API Revisions - * - * The API defined here is only an initial version of the mPIPE API. - * Future plans include: - * - * - Higher level wrapper functions to provide common initialization - * patterns. This should help users start writing mPIPE programs - * without having to learn the details of the hardware. - * - * - Support for reset and deallocation of resources, including - * cleanup upon application shutdown. - * - * - Support for calling these APIs in the BME. - * - * - Support for IO interrupts. - * - * - Clearer definitions of thread safety guarantees. - * - * @section gxio__mpipe_examples Examples - * - * See the following mPIPE example programs for more information about - * allocating mPIPE resources and using them in real applications: - * - * - @ref mpipe/ingress/app.c : Receiving packets. - * - * - @ref mpipe/forward/app.c : Forwarding packets. - * - * Note that there are several more examples. - */ - -/* Flags that can be passed to resource allocation functions. */ -enum gxio_mpipe_alloc_flags_e { - /* Require an allocation to start at a specified resource index. */ - GXIO_MPIPE_ALLOC_FIXED = HV_MPIPE_ALLOC_FIXED, -}; - -/* Flags that can be passed to memory registration functions. */ -enum gxio_mpipe_mem_flags_e { - /* Do not fill L3 when writing, and invalidate lines upon egress. */ - GXIO_MPIPE_MEM_FLAG_NT_HINT = IORPC_MEM_BUFFER_FLAG_NT_HINT, - - /* L3 cache fills should only populate IO cache ways. */ - GXIO_MPIPE_MEM_FLAG_IO_PIN = IORPC_MEM_BUFFER_FLAG_IO_PIN, -}; - -/* An ingress packet descriptor. When a packet arrives, the mPIPE - * hardware generates this structure and writes it into a NotifRing. - */ -typedef MPIPE_PDESC_t gxio_mpipe_idesc_t; - -/* An egress command descriptor. Applications write this structure - * into eDMA rings and the hardware performs the indicated operation - * (normally involving egressing some bytes). Note that egressing a - * single packet may involve multiple egress command descriptors. - */ -typedef MPIPE_EDMA_DESC_t gxio_mpipe_edesc_t; - -/* - * Max # of mpipe instances. 2 currently. - */ -#define GXIO_MPIPE_INSTANCE_MAX HV_MPIPE_INSTANCE_MAX - -#define NR_MPIPE_MAX GXIO_MPIPE_INSTANCE_MAX - -/* Get the "va" field from an "idesc". - * - * This is the address at which the ingress hardware copied the first - * byte of the packet. - * - * If the classifier detected a custom header, then this will point to - * the custom header, and gxio_mpipe_idesc_get_l2_start() will point - * to the actual L2 header. - * - * Note that this value may be misleading if "idesc->be" is set. - * - * @param idesc An ingress packet descriptor. - */ -static inline unsigned char *gxio_mpipe_idesc_get_va(gxio_mpipe_idesc_t *idesc) -{ - return (unsigned char *)(long)idesc->va; -} - -/* Get the "xfer_size" from an "idesc". - * - * This is the actual number of packet bytes transferred into memory - * by the hardware. - * - * Note that this value may be misleading if "idesc->be" is set. - * - * @param idesc An ingress packet descriptor. - * - * ISSUE: Is this the best name for this? - * FIXME: Add more docs about chaining, clipping, etc. - */ -static inline unsigned int gxio_mpipe_idesc_get_xfer_size(gxio_mpipe_idesc_t - *idesc) -{ - return idesc->l2_size; -} - -/* Get the "l2_offset" from an "idesc". - * - * Extremely customized classifiers might not support this function. - * - * This is the number of bytes between the "va" and the L2 header. - * - * The L2 header consists of a destination mac address, a source mac - * address, and an initial ethertype. Various initial ethertypes - * allow encoding extra information in the L2 header, often including - * a vlan, and/or a new ethertype. - * - * Note that the "l2_offset" will be non-zero if (and only if) the - * classifier processed a custom header for the packet. - * - * @param idesc An ingress packet descriptor. - */ -static inline uint8_t gxio_mpipe_idesc_get_l2_offset(gxio_mpipe_idesc_t *idesc) -{ - return (idesc->custom1 >> 32) & 0xFF; -} - -/* Get the "l2_start" from an "idesc". - * - * This is simply gxio_mpipe_idesc_get_va() plus - * gxio_mpipe_idesc_get_l2_offset(). - * - * @param idesc An ingress packet descriptor. - */ -static inline unsigned char *gxio_mpipe_idesc_get_l2_start(gxio_mpipe_idesc_t - *idesc) -{ - unsigned char *va = gxio_mpipe_idesc_get_va(idesc); - return va + gxio_mpipe_idesc_get_l2_offset(idesc); -} - -/* Get the "l2_length" from an "idesc". - * - * This is simply gxio_mpipe_idesc_get_xfer_size() minus - * gxio_mpipe_idesc_get_l2_offset(). - * - * @param idesc An ingress packet descriptor. - */ -static inline unsigned int gxio_mpipe_idesc_get_l2_length(gxio_mpipe_idesc_t - *idesc) -{ - unsigned int xfer_size = idesc->l2_size; - return xfer_size - gxio_mpipe_idesc_get_l2_offset(idesc); -} - -/* A context object used to manage mPIPE hardware resources. */ -typedef struct { - - /* File descriptor for calling up to Linux (and thus the HV). */ - int fd; - - /* Corresponding mpipe instance #. */ - int instance; - - /* The VA at which configuration registers are mapped. */ - char *mmio_cfg_base; - - /* The VA at which IDMA, EDMA, and buffer manager are mapped. */ - char *mmio_fast_base; - - /* The "initialized" buffer stacks. */ - gxio_mpipe_rules_stacks_t __stacks; - -} gxio_mpipe_context_t; - -/* This is only used internally, but it's most easily made visible here. */ -typedef gxio_mpipe_context_t gxio_mpipe_info_context_t; - -/* Initialize an mPIPE context. - * - * This function allocates an mPIPE "service domain" and maps the MMIO - * registers into the caller's VA space. - * - * @param context Context object to be initialized. - * @param mpipe_instance Instance number of mPIPE shim to be controlled via - * context. - */ -extern int gxio_mpipe_init(gxio_mpipe_context_t *context, - unsigned int mpipe_instance); - -/* Destroy an mPIPE context. - * - * This function frees the mPIPE "service domain" and unmaps the MMIO - * registers from the caller's VA space. - * - * If a user process exits without calling this routine, the kernel - * will destroy the mPIPE context as part of process teardown. - * - * @param context Context object to be destroyed. - */ -extern int gxio_mpipe_destroy(gxio_mpipe_context_t *context); - -/***************************************************************** - * Buffer Stacks * - ******************************************************************/ - -/* Allocate a set of buffer stacks. - * - * The return value is NOT interesting if count is zero. - * - * @param context An initialized mPIPE context. - * @param count Number of stacks required. - * @param first Index of first stack if ::GXIO_MPIPE_ALLOC_FIXED flag is set, - * otherwise ignored. - * @param flags Flag bits from ::gxio_mpipe_alloc_flags_e. - * @return Index of first allocated buffer stack, or - * ::GXIO_MPIPE_ERR_NO_BUFFER_STACK if allocation failed. - */ -extern int gxio_mpipe_alloc_buffer_stacks(gxio_mpipe_context_t *context, - unsigned int count, - unsigned int first, - unsigned int flags); - -/* Enum codes for buffer sizes supported by mPIPE. */ -typedef enum { - /* 128 byte packet data buffer. */ - GXIO_MPIPE_BUFFER_SIZE_128 = MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_128, - /* 256 byte packet data buffer. */ - GXIO_MPIPE_BUFFER_SIZE_256 = MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_256, - /* 512 byte packet data buffer. */ - GXIO_MPIPE_BUFFER_SIZE_512 = MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_512, - /* 1024 byte packet data buffer. */ - GXIO_MPIPE_BUFFER_SIZE_1024 = MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_1024, - /* 1664 byte packet data buffer. */ - GXIO_MPIPE_BUFFER_SIZE_1664 = MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_1664, - /* 4096 byte packet data buffer. */ - GXIO_MPIPE_BUFFER_SIZE_4096 = MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_4096, - /* 10368 byte packet data buffer. */ - GXIO_MPIPE_BUFFER_SIZE_10368 = - MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_10368, - /* 16384 byte packet data buffer. */ - GXIO_MPIPE_BUFFER_SIZE_16384 = MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_16384 -} gxio_mpipe_buffer_size_enum_t; - -/* Convert a buffer size in bytes into a buffer size enum. */ -extern gxio_mpipe_buffer_size_enum_t -gxio_mpipe_buffer_size_to_buffer_size_enum(size_t size); - -/* Convert a buffer size enum into a buffer size in bytes. */ -extern size_t -gxio_mpipe_buffer_size_enum_to_buffer_size(gxio_mpipe_buffer_size_enum_t - buffer_size_enum); - -/* Calculate the number of bytes required to store a given number of - * buffers in the memory registered with a buffer stack via - * gxio_mpipe_init_buffer_stack(). - */ -extern size_t gxio_mpipe_calc_buffer_stack_bytes(unsigned long buffers); - -/* Initialize a buffer stack. This function binds a region of memory - * to be used by the hardware for storing buffer addresses pushed via - * gxio_mpipe_push_buffer() or as the result of sending a buffer out - * the egress with the 'push to stack when done' bit set. Once this - * function returns, the memory region's contents may be arbitrarily - * modified by the hardware at any time and software should not access - * the memory region again. - * - * @param context An initialized mPIPE context. - * @param stack The buffer stack index. - * @param buffer_size_enum The size of each buffer in the buffer stack, - * as an enum. - * @param mem The address of the buffer stack. This memory must be - * physically contiguous and aligned to a 64kB boundary. - * @param mem_size The size of the buffer stack, in bytes. - * @param mem_flags ::gxio_mpipe_mem_flags_e memory flags. - * @return Zero on success, ::GXIO_MPIPE_ERR_INVAL_BUFFER_SIZE if - * buffer_size_enum is invalid, ::GXIO_MPIPE_ERR_BAD_BUFFER_STACK if - * stack has not been allocated. - */ -extern int gxio_mpipe_init_buffer_stack(gxio_mpipe_context_t *context, - unsigned int stack, - gxio_mpipe_buffer_size_enum_t - buffer_size_enum, void *mem, - size_t mem_size, - unsigned int mem_flags); - -/* Push a buffer onto a previously initialized buffer stack. - * - * The size of the buffer being pushed must match the size that was - * registered with gxio_mpipe_init_buffer_stack(). All packet buffer - * addresses are 128-byte aligned; the low 7 bits of the specified - * buffer address will be ignored. - * - * @param context An initialized mPIPE context. - * @param stack The buffer stack index. - * @param buffer The buffer (the low seven bits are ignored). - */ -static inline void gxio_mpipe_push_buffer(gxio_mpipe_context_t *context, - unsigned int stack, void *buffer) -{ - MPIPE_BSM_REGION_ADDR_t offset = { {0} }; - MPIPE_BSM_REGION_VAL_t val = { {0} }; - - /* - * The mmio_fast_base region starts at the IDMA region, so subtract - * off that initial offset. - */ - offset.region = - MPIPE_MMIO_ADDR__REGION_VAL_BSM - - MPIPE_MMIO_ADDR__REGION_VAL_IDMA; - offset.stack = stack; - -#if __SIZEOF_POINTER__ == 4 - val.va = ((ulong) buffer) >> MPIPE_BSM_REGION_VAL__VA_SHIFT; -#else - val.va = ((long)buffer) >> MPIPE_BSM_REGION_VAL__VA_SHIFT; -#endif - - __gxio_mmio_write(context->mmio_fast_base + offset.word, val.word); -} - -/* Pop a buffer off of a previously initialized buffer stack. - * - * @param context An initialized mPIPE context. - * @param stack The buffer stack index. - * @return The buffer, or NULL if the stack is empty. - */ -static inline void *gxio_mpipe_pop_buffer(gxio_mpipe_context_t *context, - unsigned int stack) -{ - MPIPE_BSM_REGION_ADDR_t offset = { {0} }; - - /* - * The mmio_fast_base region starts at the IDMA region, so subtract - * off that initial offset. - */ - offset.region = - MPIPE_MMIO_ADDR__REGION_VAL_BSM - - MPIPE_MMIO_ADDR__REGION_VAL_IDMA; - offset.stack = stack; - - while (1) { - /* - * Case 1: val.c == ..._UNCHAINED, va is non-zero. - * Case 2: val.c == ..._INVALID, va is zero. - * Case 3: val.c == ..._NOT_RDY, va is zero. - */ - MPIPE_BSM_REGION_VAL_t val; - val.word = - __gxio_mmio_read(context->mmio_fast_base + - offset.word); - - /* - * Handle case 1 and 2 by returning the buffer (or NULL). - * Handle case 3 by waiting for the prefetch buffer to refill. - */ - if (val.c != MPIPE_EDMA_DESC_WORD1__C_VAL_NOT_RDY) - return (void *)((unsigned long)val. - va << MPIPE_BSM_REGION_VAL__VA_SHIFT); - } -} - -/***************************************************************** - * NotifRings * - ******************************************************************/ - -/* Allocate a set of NotifRings. - * - * The return value is NOT interesting if count is zero. - * - * Note that NotifRings are allocated in chunks, so allocating one at - * a time is much less efficient than allocating several at once. - * - * @param context An initialized mPIPE context. - * @param count Number of NotifRings required. - * @param first Index of first NotifRing if ::GXIO_MPIPE_ALLOC_FIXED flag - * is set, otherwise ignored. - * @param flags Flag bits from ::gxio_mpipe_alloc_flags_e. - * @return Index of first allocated buffer NotifRing, or - * ::GXIO_MPIPE_ERR_NO_NOTIF_RING if allocation failed. - */ -extern int gxio_mpipe_alloc_notif_rings(gxio_mpipe_context_t *context, - unsigned int count, unsigned int first, - unsigned int flags); - -/* Initialize a NotifRing, using the given memory and size. - * - * @param context An initialized mPIPE context. - * @param ring The NotifRing index. - * @param mem A physically contiguous region of memory to be filled - * with a ring of ::gxio_mpipe_idesc_t structures. - * @param mem_size Number of bytes in the ring. Must be 128, 512, - * 2048, or 65536 * sizeof(gxio_mpipe_idesc_t). - * @param mem_flags ::gxio_mpipe_mem_flags_e memory flags. - * - * @return 0 on success, ::GXIO_MPIPE_ERR_BAD_NOTIF_RING or - * ::GXIO_ERR_INVAL_MEMORY_SIZE on failure. - */ -extern int gxio_mpipe_init_notif_ring(gxio_mpipe_context_t *context, - unsigned int ring, - void *mem, size_t mem_size, - unsigned int mem_flags); - -/* Configure an interrupt to be sent to a tile on incoming NotifRing - * traffic. Once an interrupt is sent for a particular ring, no more - * will be sent until gxio_mica_enable_notif_ring_interrupt() is called. - * - * @param context An initialized mPIPE context. - * @param x X coordinate of interrupt target tile. - * @param y Y coordinate of interrupt target tile. - * @param i Index of the IPI register which will receive the interrupt. - * @param e Specific event which will be set in the target IPI register when - * the interrupt occurs. - * @param ring The NotifRing index. - * @return Zero on success, GXIO_ERR_INVAL if params are out of range. - */ -extern int gxio_mpipe_request_notif_ring_interrupt(gxio_mpipe_context_t - *context, int x, int y, - int i, int e, - unsigned int ring); - -/* Enable an interrupt on incoming NotifRing traffic. - * - * @param context An initialized mPIPE context. - * @param ring The NotifRing index. - * @return Zero on success, GXIO_ERR_INVAL if params are out of range. - */ -extern int gxio_mpipe_enable_notif_ring_interrupt(gxio_mpipe_context_t - *context, unsigned int ring); - -/* Map all of a client's memory via the given IOTLB. - * @param context An initialized mPIPE context. - * @param iotlb IOTLB index. - * @param pte Page table entry. - * @param flags Flags. - * @return Zero on success, or a negative error code. - */ -extern int gxio_mpipe_register_client_memory(gxio_mpipe_context_t *context, - unsigned int iotlb, HV_PTE pte, - unsigned int flags); - -/***************************************************************** - * Notif Groups * - ******************************************************************/ - -/* Allocate a set of NotifGroups. - * - * The return value is NOT interesting if count is zero. - * - * @param context An initialized mPIPE context. - * @param count Number of NotifGroups required. - * @param first Index of first NotifGroup if ::GXIO_MPIPE_ALLOC_FIXED flag - * is set, otherwise ignored. - * @param flags Flag bits from ::gxio_mpipe_alloc_flags_e. - * @return Index of first allocated buffer NotifGroup, or - * ::GXIO_MPIPE_ERR_NO_NOTIF_GROUP if allocation failed. - */ -extern int gxio_mpipe_alloc_notif_groups(gxio_mpipe_context_t *context, - unsigned int count, - unsigned int first, - unsigned int flags); - -/* Add a NotifRing to a NotifGroup. This only sets a bit in the - * application's 'group' object; the hardware NotifGroup can be - * initialized by passing 'group' to gxio_mpipe_init_notif_group() or - * gxio_mpipe_init_notif_group_and_buckets(). - */ -static inline void -gxio_mpipe_notif_group_add_ring(gxio_mpipe_notif_group_bits_t *bits, int ring) -{ - bits->ring_mask[ring / 64] |= (1ull << (ring % 64)); -} - -/* Set a particular NotifGroup bitmask. Since the load balancer - * makes decisions based on both bucket and NotifGroup state, most - * applications should use gxio_mpipe_init_notif_group_and_buckets() - * rather than using this function to configure just a NotifGroup. - */ -extern int gxio_mpipe_init_notif_group(gxio_mpipe_context_t *context, - unsigned int group, - gxio_mpipe_notif_group_bits_t bits); - -/***************************************************************** - * Load Balancer * - ******************************************************************/ - -/* Allocate a set of load balancer buckets. - * - * The return value is NOT interesting if count is zero. - * - * Note that buckets are allocated in chunks, so allocating one at - * a time is much less efficient than allocating several at once. - * - * Note that the buckets are actually divided into two sub-ranges, of - * different sizes, and different chunk sizes, and the range you get - * by default is determined by the size of the request. Allocations - * cannot span the two sub-ranges. - * - * @param context An initialized mPIPE context. - * @param count Number of buckets required. - * @param first Index of first bucket if ::GXIO_MPIPE_ALLOC_FIXED flag is set, - * otherwise ignored. - * @param flags Flag bits from ::gxio_mpipe_alloc_flags_e. - * @return Index of first allocated buffer bucket, or - * ::GXIO_MPIPE_ERR_NO_BUCKET if allocation failed. - */ -extern int gxio_mpipe_alloc_buckets(gxio_mpipe_context_t *context, - unsigned int count, unsigned int first, - unsigned int flags); - -/* The legal modes for gxio_mpipe_bucket_info_t and - * gxio_mpipe_init_notif_group_and_buckets(). - * - * All modes except ::GXIO_MPIPE_BUCKET_ROUND_ROBIN expect that the user - * will allocate a power-of-two number of buckets and initialize them - * to the same mode. The classifier program then uses the appropriate - * number of low bits from the incoming packet's flow hash to choose a - * load balancer bucket. Based on that bucket's load balancing mode, - * reference count, and currently active NotifRing, the load balancer - * chooses the NotifRing to which the packet will be delivered. - */ -typedef enum { - /* All packets for a bucket go to the same NotifRing unless the - * NotifRing gets full, in which case packets will be dropped. If - * the bucket reference count ever reaches zero, a new NotifRing may - * be chosen. - */ - GXIO_MPIPE_BUCKET_DYNAMIC_FLOW_AFFINITY = - MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_DFA, - - /* All packets for a bucket always go to the same NotifRing. - */ - GXIO_MPIPE_BUCKET_STATIC_FLOW_AFFINITY = - MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_FIXED, - - /* All packets for a bucket go to the least full NotifRing in the - * group, providing load balancing round robin behavior. - */ - GXIO_MPIPE_BUCKET_ROUND_ROBIN = - MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_ALWAYS_PICK, - - /* All packets for a bucket go to the same NotifRing unless the - * NotifRing gets full, at which point the bucket starts using the - * least full NotifRing in the group. If all NotifRings in the - * group are full, packets will be dropped. - */ - GXIO_MPIPE_BUCKET_STICKY_FLOW_LOCALITY = - MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_STICKY, - - /* All packets for a bucket go to the same NotifRing unless the - * NotifRing gets full, or a random timer fires, at which point the - * bucket starts using the least full NotifRing in the group. If - * all NotifRings in the group are full, packets will be dropped. - * WARNING: This mode is BROKEN on chips with fewer than 64 tiles. - */ - GXIO_MPIPE_BUCKET_PREFER_FLOW_LOCALITY = - MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_STICKY_RAND, - -} gxio_mpipe_bucket_mode_t; - -/* Copy a set of bucket initialization values into the mPIPE - * hardware. Since the load balancer makes decisions based on both - * bucket and NotifGroup state, most applications should use - * gxio_mpipe_init_notif_group_and_buckets() rather than using this - * function to configure a single bucket. - * - * @param context An initialized mPIPE context. - * @param bucket Bucket index to be initialized. - * @param bucket_info Initial reference count, NotifRing index, and mode. - * @return 0 on success, ::GXIO_MPIPE_ERR_BAD_BUCKET on failure. - */ -extern int gxio_mpipe_init_bucket(gxio_mpipe_context_t *context, - unsigned int bucket, - gxio_mpipe_bucket_info_t bucket_info); - -/* Initializes a group and range of buckets and range of rings such - * that the load balancer runs a particular load balancing function. - * - * First, the group is initialized with the given rings. - * - * Second, each bucket is initialized with the mode and group, and a - * ring chosen round-robin from the given rings. - * - * Normally, the classifier picks a bucket, and then the load balancer - * picks a ring, based on the bucket's mode, group, and current ring, - * possibly updating the bucket's ring. - * - * @param context An initialized mPIPE context. - * @param group The group. - * @param ring The first ring. - * @param num_rings The number of rings. - * @param bucket The first bucket. - * @param num_buckets The number of buckets. - * @param mode The load balancing mode. - * - * @return 0 on success, ::GXIO_MPIPE_ERR_BAD_BUCKET, - * ::GXIO_MPIPE_ERR_BAD_NOTIF_GROUP, or - * ::GXIO_MPIPE_ERR_BAD_NOTIF_RING on failure. - */ -extern int gxio_mpipe_init_notif_group_and_buckets(gxio_mpipe_context_t - *context, - unsigned int group, - unsigned int ring, - unsigned int num_rings, - unsigned int bucket, - unsigned int num_buckets, - gxio_mpipe_bucket_mode_t - mode); - -/* Return credits to a NotifRing and/or bucket. - * - * @param context An initialized mPIPE context. - * @param ring The NotifRing index, or -1. - * @param bucket The bucket, or -1. - * @param count The number of credits to return. - */ -static inline void gxio_mpipe_credit(gxio_mpipe_context_t *context, - int ring, int bucket, unsigned int count) -{ - /* NOTE: Fancy struct initialization would break "C89" header test. */ - - MPIPE_IDMA_RELEASE_REGION_ADDR_t offset = { {0} }; - MPIPE_IDMA_RELEASE_REGION_VAL_t val = { {0} }; - - /* - * The mmio_fast_base region starts at the IDMA region, so subtract - * off that initial offset. - */ - offset.region = - MPIPE_MMIO_ADDR__REGION_VAL_IDMA - - MPIPE_MMIO_ADDR__REGION_VAL_IDMA; - offset.ring = ring; - offset.bucket = bucket; - offset.ring_enable = (ring >= 0); - offset.bucket_enable = (bucket >= 0); - val.count = count; - - __gxio_mmio_write(context->mmio_fast_base + offset.word, val.word); -} - -/***************************************************************** - * Egress Rings * - ******************************************************************/ - -/* Allocate a set of eDMA rings. - * - * The return value is NOT interesting if count is zero. - * - * @param context An initialized mPIPE context. - * @param count Number of eDMA rings required. - * @param first Index of first eDMA ring if ::GXIO_MPIPE_ALLOC_FIXED flag - * is set, otherwise ignored. - * @param flags Flag bits from ::gxio_mpipe_alloc_flags_e. - * @return Index of first allocated buffer eDMA ring, or - * ::GXIO_MPIPE_ERR_NO_EDMA_RING if allocation failed. - */ -extern int gxio_mpipe_alloc_edma_rings(gxio_mpipe_context_t *context, - unsigned int count, unsigned int first, - unsigned int flags); - -/* Initialize an eDMA ring, using the given memory and size. - * - * @param context An initialized mPIPE context. - * @param ering The eDMA ring index. - * @param channel The channel to use. This must be one of the channels - * associated with the context's set of open links. - * @param mem A physically contiguous region of memory to be filled - * with a ring of ::gxio_mpipe_edesc_t structures. - * @param mem_size Number of bytes in the ring. Must be 512, 2048, - * 8192 or 65536, times 16 (i.e. sizeof(gxio_mpipe_edesc_t)). - * @param mem_flags ::gxio_mpipe_mem_flags_e memory flags. - * - * @return 0 on success, ::GXIO_MPIPE_ERR_BAD_EDMA_RING or - * ::GXIO_ERR_INVAL_MEMORY_SIZE on failure. - */ -extern int gxio_mpipe_init_edma_ring(gxio_mpipe_context_t *context, - unsigned int ering, unsigned int channel, - void *mem, size_t mem_size, - unsigned int mem_flags); - -/* Set the "max_blks", "min_snf_blks", and "db" fields of - * ::MPIPE_EDMA_RG_INIT_DAT_THRESH_t for a given edma ring. - * - * The global pool of dynamic blocks will be automatically adjusted. - * - * This function should not be called after any egress has been done - * on the edma ring. - * - * Most applications should just use gxio_mpipe_equeue_set_snf_size(). - * - * @param context An initialized mPIPE context. - * @param ering The eDMA ring index. - * @param max_blks The number of blocks to dedicate to the ring - * (normally min_snf_blks + 1). Must be greater than min_snf_blocks. - * @param min_snf_blks The number of blocks which must be stored - * prior to starting to send the packet (normally 12). - * @param db Whether to allow use of dynamic blocks by the ring - * (normally 1). - * - * @return 0 on success, negative on error. - */ -extern int gxio_mpipe_config_edma_ring_blks(gxio_mpipe_context_t *context, - unsigned int ering, - unsigned int max_blks, - unsigned int min_snf_blks, - unsigned int db); - -/***************************************************************** - * Classifier Program * - ******************************************************************/ - -/* - * - * Functions for loading or configuring the mPIPE classifier program. - * - * The mPIPE classification processors all run a special "classifier" - * program which, for each incoming packet, parses the packet headers, - * encodes some packet metadata in the "idesc", and either drops the - * packet, or picks a notif ring to handle the packet, and a buffer - * stack to contain the packet, usually based on the channel, VLAN, - * dMAC, flow hash, and packet size, under the guidance of the "rules" - * API described below. - * - * @section gxio_mpipe_classifier_default Default Classifier - * - * The MDE provides a simple "default" classifier program. It is - * shipped as source in "$TILERA_ROOT/src/sys/mpipe/classifier.c", - * which serves as its official documentation. It is shipped as a - * binary program in "$TILERA_ROOT/tile/boot/classifier", which is - * automatically included in bootroms created by "tile-monitor", and - * is automatically loaded by the hypervisor at boot time. - * - * The L2 analysis handles LLC packets, SNAP packets, and "VLAN - * wrappers" (keeping the outer VLAN). - * - * The L3 analysis handles IPv4 and IPv6, dropping packets with bad - * IPv4 header checksums, requesting computation of a TCP/UDP checksum - * if appropriate, and hashing the dest and src IP addresses, plus the - * ports for TCP/UDP packets, into the flow hash. No special analysis - * is done for "fragmented" packets or "tunneling" protocols. Thus, - * the first fragment of a fragmented TCP/UDP packet is hashed using - * src/dest IP address and ports and all subsequent fragments are only - * hashed according to src/dest IP address. - * - * The L3 analysis handles other packets too, hashing the dMAC - * smac into a flow hash. - * - * The channel, VLAN, and dMAC used to pick a "rule" (see the - * "rules" APIs below), which in turn is used to pick a buffer stack - * (based on the packet size) and a bucket (based on the flow hash). - * - * To receive traffic matching a particular (channel/VLAN/dMAC - * pattern, an application should allocate its own buffer stacks and - * load balancer buckets, and map traffic to those stacks and buckets, - * as decribed by the "rules" API below. - * - * Various packet metadata is encoded in the idesc. The flow hash is - * four bytes at 0x0C. The VLAN is two bytes at 0x10. The ethtype is - * two bytes at 0x12. The l3 start is one byte at 0x14. The l4 start - * is one byte at 0x15 for IPv4 and IPv6 packets, and otherwise zero. - * The protocol is one byte at 0x16 for IPv4 and IPv6 packets, and - * otherwise zero. - * - * @section gxio_mpipe_classifier_custom Custom Classifiers. - * - * A custom classifier may be created using "tile-mpipe-cc" with a - * customized version of the default classifier sources. - * - * The custom classifier may be included in bootroms using the - * "--classifier" option to "tile-monitor", or loaded dynamically - * using gxio_mpipe_classifier_load_from_file(). - * - * Be aware that "extreme" customizations may break the assumptions of - * the "rules" APIs described below, but simple customizations, such - * as adding new packet metadata, should be fine. - */ - -/* A set of classifier rules, plus a context. */ -typedef struct { - - /* The context. */ - gxio_mpipe_context_t *context; - - /* The actual rules. */ - gxio_mpipe_rules_list_t list; - -} gxio_mpipe_rules_t; - -/* Initialize a classifier program rules list. - * - * This function can be called on a previously initialized rules list - * to discard any previously added rules. - * - * @param rules Rules list to initialize. - * @param context An initialized mPIPE context. - */ -extern void gxio_mpipe_rules_init(gxio_mpipe_rules_t *rules, - gxio_mpipe_context_t *context); - -/* Begin a new rule on the indicated rules list. - * - * Note that an empty rule matches all packets, but an empty rule list - * matches no packets. - * - * @param rules Rules list to which new rule is appended. - * @param bucket First load balancer bucket to which packets will be - * delivered. - * @param num_buckets Number of buckets (must be a power of two) across - * which packets will be distributed based on the "flow hash". - * @param stacks Either NULL, to assign each packet to the smallest - * initialized buffer stack which does not induce chaining (and to - * drop packets which exceed the largest initialized buffer stack - * buffer size), or an array, with each entry indicating which buffer - * stack should be used for packets up to that size (with 255 - * indicating that those packets should be dropped). - * @return 0 on success, or a negative error code on failure. - */ -extern int gxio_mpipe_rules_begin(gxio_mpipe_rules_t *rules, - unsigned int bucket, - unsigned int num_buckets, - gxio_mpipe_rules_stacks_t *stacks); - -/* Set the headroom of the current rule. - * - * @param rules Rules list whose current rule will be modified. - * @param headroom The headroom. - * @return 0 on success, or a negative error code on failure. - */ -extern int gxio_mpipe_rules_set_headroom(gxio_mpipe_rules_t *rules, - uint8_t headroom); - -/* Indicate that packets from a particular channel can be delivered - * to the buckets and buffer stacks associated with the current rule. - * - * Channels added must be associated with links opened by the mPIPE context - * used in gxio_mpipe_rules_init(). A rule with no channels is equivalent - * to a rule naming all such associated channels. - * - * @param rules Rules list whose current rule will be modified. - * @param channel The channel to add. - * @return 0 on success, or a negative error code on failure. - */ -extern int gxio_mpipe_rules_add_channel(gxio_mpipe_rules_t *rules, - unsigned int channel); - -/* Commit rules. - * - * The rules are sent to the hypervisor, where they are combined with - * the rules from other apps, and used to program the hardware classifier. - * - * Note that if this function returns an error, then the rules will NOT - * have been committed, even if the error is due to interactions with - * rules from another app. - * - * @param rules Rules list to commit. - * @return 0 on success, or a negative error code on failure. - */ -extern int gxio_mpipe_rules_commit(gxio_mpipe_rules_t *rules); - -/***************************************************************** - * Ingress Queue Wrapper * - ******************************************************************/ - -/* - * - * Convenience functions for receiving packets from a NotifRing and - * sending packets via an eDMA ring. - * - * The mpipe ingress and egress hardware uses shared memory packet - * descriptors to describe packets that have arrived on ingress or - * are destined for egress. These descriptors are stored in shared - * memory ring buffers and written or read by hardware as necessary. - * The gxio library provides wrapper functions that manage the head and - * tail pointers for these rings, allowing the user to easily read or - * write packet descriptors. - * - * The initialization interface for ingress and egress rings is quite - * similar. For example, to create an ingress queue, the user passes - * a ::gxio_mpipe_iqueue_t state object, a ring number from - * gxio_mpipe_alloc_notif_rings(), and the address of memory to hold a - * ring buffer to the gxio_mpipe_iqueue_init() function. The function - * returns success when the state object has been initialized and the - * hardware configured to deliver packets to the specified ring - * buffer. Similarly, gxio_mpipe_equeue_init() takes a - * ::gxio_mpipe_equeue_t state object, a ring number from - * gxio_mpipe_alloc_edma_rings(), and a shared memory buffer. - * - * @section gxio_mpipe_iqueue Working with Ingress Queues - * - * Once initialized, the gxio_mpipe_iqueue_t API provides two flows - * for getting the ::gxio_mpipe_idesc_t packet descriptor associated - * with incoming packets. The simplest is to call - * gxio_mpipe_iqueue_get() or gxio_mpipe_iqueue_try_get(). These - * functions copy the oldest packet descriptor out of the NotifRing and - * into a descriptor provided by the caller. They also immediately - * inform the hardware that a descriptor has been processed. - * - * For applications with stringent performance requirements, higher - * efficiency can be achieved by avoiding the packet descriptor copy - * and processing multiple descriptors at once. The - * gxio_mpipe_iqueue_peek() and gxio_mpipe_iqueue_try_peek() functions - * allow such optimizations. These functions provide a pointer to the - * next valid ingress descriptor in the NotifRing's shared memory ring - * buffer, and a count of how many contiguous descriptors are ready to - * be processed. The application can then process any number of those - * descriptors in place, calling gxio_mpipe_iqueue_consume() to inform - * the hardware after each one has been processed. - * - * @section gxio_mpipe_equeue Working with Egress Queues - * - * Similarly, the egress queue API provides a high-performance - * interface plus a simple wrapper for use in posting - * ::gxio_mpipe_edesc_t egress packet descriptors. The simple - * version, gxio_mpipe_equeue_put(), allows the programmer to wait for - * an eDMA ring slot to become available and write a single descriptor - * into the ring. - * - * Alternatively, you can reserve slots in the eDMA ring using - * gxio_mpipe_equeue_reserve() or gxio_mpipe_equeue_try_reserve(), and - * then fill in each slot using gxio_mpipe_equeue_put_at(). This - * capability can be used to amortize the cost of reserving slots - * across several packets. It also allows gather operations to be - * performed on a shared equeue, by ensuring that the edescs for all - * the fragments are all contiguous in the eDMA ring. - * - * The gxio_mpipe_equeue_reserve() and gxio_mpipe_equeue_try_reserve() - * functions return a 63-bit "completion slot", which is actually a - * sequence number, the low bits of which indicate the ring buffer - * index and the high bits the number of times the application has - * gone around the egress ring buffer. The extra bits allow an - * application to check for egress completion by calling - * gxio_mpipe_equeue_is_complete() to see whether a particular 'slot' - * number has finished. Given the maximum packet rates of the Gx - * processor, the 63-bit slot number will never wrap. - * - * In practice, most applications use the ::gxio_mpipe_edesc_t::hwb - * bit to indicate that the buffers containing egress packet data - * should be pushed onto a buffer stack when egress is complete. Such - * applications generally do not need to know when an egress operation - * completes (since there is no need to free a buffer post-egress), - * and thus can use the optimized gxio_mpipe_equeue_reserve_fast() or - * gxio_mpipe_equeue_try_reserve_fast() functions, which return a 24 - * bit "slot", instead of a 63-bit "completion slot". - * - * Once a slot has been "reserved", it MUST be filled. If the - * application reserves a slot and then decides that it does not - * actually need it, it can set the ::gxio_mpipe_edesc_t::ns (no send) - * bit on the descriptor passed to gxio_mpipe_equeue_put_at() to - * indicate that no data should be sent. This technique can also be - * used to drop an incoming packet, instead of forwarding it, since - * any buffer will still be pushed onto the buffer stack when the - * egress descriptor is processed. - */ - -/* A convenient interface to a NotifRing, for use by a single thread. - */ -typedef struct { - - /* The context. */ - gxio_mpipe_context_t *context; - - /* The actual NotifRing. */ - gxio_mpipe_idesc_t *idescs; - - /* The number of entries. */ - unsigned long num_entries; - - /* The number of entries minus one. */ - unsigned long mask_num_entries; - - /* The log2() of the number of entries. */ - unsigned long log2_num_entries; - - /* The next entry. */ - unsigned int head; - - /* The NotifRing id. */ - unsigned int ring; - -#ifdef __BIG_ENDIAN__ - /* The number of byteswapped entries. */ - unsigned int swapped; -#endif - -} gxio_mpipe_iqueue_t; - -/* Initialize an "iqueue". - * - * Takes the iqueue plus the same args as gxio_mpipe_init_notif_ring(). - */ -extern int gxio_mpipe_iqueue_init(gxio_mpipe_iqueue_t *iqueue, - gxio_mpipe_context_t *context, - unsigned int ring, - void *mem, size_t mem_size, - unsigned int mem_flags); - -/* Advance over some old entries in an iqueue. - * - * Please see the documentation for gxio_mpipe_iqueue_consume(). - * - * @param iqueue An ingress queue initialized via gxio_mpipe_iqueue_init(). - * @param count The number of entries to advance over. - */ -static inline void gxio_mpipe_iqueue_advance(gxio_mpipe_iqueue_t *iqueue, - int count) -{ - /* Advance with proper wrap. */ - int head = iqueue->head + count; - iqueue->head = - (head & iqueue->mask_num_entries) + - (head >> iqueue->log2_num_entries); - -#ifdef __BIG_ENDIAN__ - /* HACK: Track swapped entries. */ - iqueue->swapped -= count; -#endif -} - -/* Release the ring and bucket for an old entry in an iqueue. - * - * Releasing the ring allows more packets to be delivered to the ring. - * - * Releasing the bucket allows flows using the bucket to be moved to a - * new ring when using GXIO_MPIPE_BUCKET_DYNAMIC_FLOW_AFFINITY. - * - * This function is shorthand for "gxio_mpipe_credit(iqueue->context, - * iqueue->ring, idesc->bucket_id, 1)", and it may be more convenient - * to make that underlying call, using those values, instead of - * tracking the entire "idesc". - * - * If packet processing is deferred, optimal performance requires that - * the releasing be deferred as well. - * - * Please see the documentation for gxio_mpipe_iqueue_consume(). - * - * @param iqueue An ingress queue initialized via gxio_mpipe_iqueue_init(). - * @param idesc The descriptor which was processed. - */ -static inline void gxio_mpipe_iqueue_release(gxio_mpipe_iqueue_t *iqueue, - gxio_mpipe_idesc_t *idesc) -{ - gxio_mpipe_credit(iqueue->context, iqueue->ring, idesc->bucket_id, 1); -} - -/* Consume a packet from an "iqueue". - * - * After processing packets peeked at via gxio_mpipe_iqueue_peek() - * or gxio_mpipe_iqueue_try_peek(), you must call this function, or - * gxio_mpipe_iqueue_advance() plus gxio_mpipe_iqueue_release(), to - * advance over those entries, and release their rings and buckets. - * - * You may call this function as each packet is processed, or you can - * wait until several packets have been processed. - * - * Note that if you are using a single bucket, and you are handling - * batches of N packets, then you can replace several calls to this - * function with calls to "gxio_mpipe_iqueue_advance(iqueue, N)" and - * "gxio_mpipe_credit(iqueue->context, iqueue->ring, bucket, N)". - * - * Note that if your classifier sets "idesc->nr", then you should - * explicitly call "gxio_mpipe_iqueue_advance(iqueue, idesc)" plus - * "gxio_mpipe_credit(iqueue->context, iqueue->ring, -1, 1)", to - * avoid incorrectly crediting the (unused) bucket. - * - * @param iqueue An ingress queue initialized via gxio_mpipe_iqueue_init(). - * @param idesc The descriptor which was processed. - */ -static inline void gxio_mpipe_iqueue_consume(gxio_mpipe_iqueue_t *iqueue, - gxio_mpipe_idesc_t *idesc) -{ - gxio_mpipe_iqueue_advance(iqueue, 1); - gxio_mpipe_iqueue_release(iqueue, idesc); -} - -/* Peek at the next packet(s) in an "iqueue", without waiting. - * - * If no packets are available, fills idesc_ref with NULL, and then - * returns ::GXIO_MPIPE_ERR_IQUEUE_EMPTY. Otherwise, fills idesc_ref - * with the address of the next valid packet descriptor, and returns - * the maximum number of valid descriptors which can be processed. - * You may process fewer descriptors if desired. - * - * Call gxio_mpipe_iqueue_consume() on each packet once it has been - * processed (or dropped), to allow more packets to be delivered. - * - * @param iqueue An ingress queue initialized via gxio_mpipe_iqueue_init(). - * @param idesc_ref A pointer to a packet descriptor pointer. - * @return The (positive) number of packets which can be processed, - * or ::GXIO_MPIPE_ERR_IQUEUE_EMPTY if no packets are available. - */ -static inline int gxio_mpipe_iqueue_try_peek(gxio_mpipe_iqueue_t *iqueue, - gxio_mpipe_idesc_t **idesc_ref) -{ - gxio_mpipe_idesc_t *next; - - uint64_t head = iqueue->head; - uint64_t tail = __gxio_mmio_read(iqueue->idescs); - - /* Available entries. */ - uint64_t avail = - (tail >= head) ? (tail - head) : (iqueue->num_entries - head); - - if (avail == 0) { - *idesc_ref = NULL; - return GXIO_MPIPE_ERR_IQUEUE_EMPTY; - } - - next = &iqueue->idescs[head]; - - /* ISSUE: Is this helpful? */ - __insn_prefetch(next); - -#ifdef __BIG_ENDIAN__ - /* HACK: Swap new entries directly in memory. */ - { - int i, j; - for (i = iqueue->swapped; i < avail; i++) { - for (j = 0; j < 8; j++) - next[i].words[j] = - __builtin_bswap64(next[i].words[j]); - } - iqueue->swapped = avail; - } -#endif - - *idesc_ref = next; - - return avail; -} - -/* Drop a packet by pushing its buffer (if appropriate). - * - * NOTE: The caller must still call gxio_mpipe_iqueue_consume() if idesc - * came from gxio_mpipe_iqueue_try_peek() or gxio_mpipe_iqueue_peek(). - * - * @param iqueue An ingress queue initialized via gxio_mpipe_iqueue_init(). - * @param idesc A packet descriptor. - */ -static inline void gxio_mpipe_iqueue_drop(gxio_mpipe_iqueue_t *iqueue, - gxio_mpipe_idesc_t *idesc) -{ - /* FIXME: Handle "chaining" properly. */ - - if (!idesc->be) { - unsigned char *va = gxio_mpipe_idesc_get_va(idesc); - gxio_mpipe_push_buffer(iqueue->context, idesc->stack_idx, va); - } -} - -/***************************************************************** - * Egress Queue Wrapper * - ******************************************************************/ - -/* A convenient, thread-safe interface to an eDMA ring. */ -typedef struct { - - /* State object for tracking head and tail pointers. */ - __gxio_dma_queue_t dma_queue; - - /* The ring entries. */ - gxio_mpipe_edesc_t *edescs; - - /* The number of entries minus one. */ - unsigned long mask_num_entries; - - /* The log2() of the number of entries. */ - unsigned long log2_num_entries; - - /* The context. */ - gxio_mpipe_context_t *context; - - /* The ering. */ - unsigned int ering; - - /* The channel. */ - unsigned int channel; - -} gxio_mpipe_equeue_t; - -/* Initialize an "equeue". - * - * This function uses gxio_mpipe_init_edma_ring() to initialize the - * underlying edma_ring using the provided arguments. - * - * @param equeue An egress queue to be initialized. - * @param context An initialized mPIPE context. - * @param ering The eDMA ring index. - * @param channel The channel to use. This must be one of the channels - * associated with the context's set of open links. - * @param mem A physically contiguous region of memory to be filled - * with a ring of ::gxio_mpipe_edesc_t structures. - * @param mem_size Number of bytes in the ring. Must be 512, 2048, - * 8192 or 65536, times 16 (i.e. sizeof(gxio_mpipe_edesc_t)). - * @param mem_flags ::gxio_mpipe_mem_flags_e memory flags. - * - * @return 0 on success, ::GXIO_MPIPE_ERR_BAD_EDMA_RING or - * ::GXIO_ERR_INVAL_MEMORY_SIZE on failure. - */ -extern int gxio_mpipe_equeue_init(gxio_mpipe_equeue_t *equeue, - gxio_mpipe_context_t *context, - unsigned int ering, - unsigned int channel, - void *mem, unsigned int mem_size, - unsigned int mem_flags); - -/* Reserve completion slots for edescs. - * - * Use gxio_mpipe_equeue_put_at() to actually populate the slots. - * - * This function is slower than gxio_mpipe_equeue_reserve_fast(), but - * returns a full 64 bit completion slot, which can be used with - * gxio_mpipe_equeue_is_complete(). - * - * @param equeue An egress queue initialized via gxio_mpipe_equeue_init(). - * @param num Number of slots to reserve (must be non-zero). - * @return The first reserved completion slot, or a negative error code. - */ -static inline int64_t gxio_mpipe_equeue_reserve(gxio_mpipe_equeue_t *equeue, - unsigned int num) -{ - return __gxio_dma_queue_reserve_aux(&equeue->dma_queue, num, true); -} - -/* Reserve completion slots for edescs, if possible. - * - * Use gxio_mpipe_equeue_put_at() to actually populate the slots. - * - * This function is slower than gxio_mpipe_equeue_try_reserve_fast(), - * but returns a full 64 bit completion slot, which can be used with - * gxio_mpipe_equeue_is_complete(). - * - * @param equeue An egress queue initialized via gxio_mpipe_equeue_init(). - * @param num Number of slots to reserve (must be non-zero). - * @return The first reserved completion slot, or a negative error code. - */ -static inline int64_t gxio_mpipe_equeue_try_reserve(gxio_mpipe_equeue_t - *equeue, unsigned int num) -{ - return __gxio_dma_queue_reserve_aux(&equeue->dma_queue, num, false); -} - -/* Reserve slots for edescs. - * - * Use gxio_mpipe_equeue_put_at() to actually populate the slots. - * - * This function is faster than gxio_mpipe_equeue_reserve(), but - * returns a 24 bit slot (instead of a 64 bit completion slot), which - * thus cannot be used with gxio_mpipe_equeue_is_complete(). - * - * @param equeue An egress queue initialized via gxio_mpipe_equeue_init(). - * @param num Number of slots to reserve (should be non-zero). - * @return The first reserved slot, or a negative error code. - */ -static inline int64_t gxio_mpipe_equeue_reserve_fast(gxio_mpipe_equeue_t - *equeue, unsigned int num) -{ - return __gxio_dma_queue_reserve(&equeue->dma_queue, num, true, false); -} - -/* Reserve slots for edescs, if possible. - * - * Use gxio_mpipe_equeue_put_at() to actually populate the slots. - * - * This function is faster than gxio_mpipe_equeue_try_reserve(), but - * returns a 24 bit slot (instead of a 64 bit completion slot), which - * thus cannot be used with gxio_mpipe_equeue_is_complete(). - * - * @param equeue An egress queue initialized via gxio_mpipe_equeue_init(). - * @param num Number of slots to reserve (should be non-zero). - * @return The first reserved slot, or a negative error code. - */ -static inline int64_t gxio_mpipe_equeue_try_reserve_fast(gxio_mpipe_equeue_t - *equeue, - unsigned int num) -{ - return __gxio_dma_queue_reserve(&equeue->dma_queue, num, false, false); -} - -/* - * HACK: This helper function tricks gcc 4.6 into avoiding saving - * a copy of "edesc->words[0]" on the stack for no obvious reason. - */ - -static inline void gxio_mpipe_equeue_put_at_aux(gxio_mpipe_equeue_t *equeue, - uint_reg_t ew[2], - unsigned long slot) -{ - unsigned long edma_slot = slot & equeue->mask_num_entries; - gxio_mpipe_edesc_t *edesc_p = &equeue->edescs[edma_slot]; - - /* - * ISSUE: Could set eDMA ring to be on generation 1 at start, which - * would avoid the negation here, perhaps allowing "__insn_bfins()". - */ - ew[0] |= !((slot >> equeue->log2_num_entries) & 1); - - /* - * NOTE: We use "__gxio_mpipe_write()", plus the fact that the eDMA - * queue alignment restrictions ensure that these two words are on - * the same cacheline, to force proper ordering between the stores. - */ - __gxio_mmio_write64(&edesc_p->words[1], ew[1]); - __gxio_mmio_write64(&edesc_p->words[0], ew[0]); -} - -/* Post an edesc to a given slot in an equeue. - * - * This function copies the supplied edesc into entry "slot mod N" in - * the underlying ring, setting the "gen" bit to the appropriate value - * based on "(slot mod N*2)", where "N" is the size of the ring. Note - * that the higher bits of slot are unused, and thus, this function - * can handle "slots" as well as "completion slots". - * - * Normally this function is used to fill in slots reserved by - * gxio_mpipe_equeue_try_reserve(), gxio_mpipe_equeue_reserve(), - * gxio_mpipe_equeue_try_reserve_fast(), or - * gxio_mpipe_equeue_reserve_fast(), - * - * This function can also be used without "reserving" slots, if the - * application KNOWS that the ring can never overflow, for example, by - * pushing fewer buffers into the buffer stacks than there are total - * slots in the equeue, but this is NOT recommended. - * - * @param equeue An egress queue initialized via gxio_mpipe_equeue_init(). - * @param edesc The egress descriptor to be posted. - * @param slot An egress slot (only the low bits are actually used). - */ -static inline void gxio_mpipe_equeue_put_at(gxio_mpipe_equeue_t *equeue, - gxio_mpipe_edesc_t edesc, - unsigned long slot) -{ - gxio_mpipe_equeue_put_at_aux(equeue, edesc.words, slot); -} - -/* Post an edesc to the next slot in an equeue. - * - * This is a convenience wrapper around - * gxio_mpipe_equeue_reserve_fast() and gxio_mpipe_equeue_put_at(). - * - * @param equeue An egress queue initialized via gxio_mpipe_equeue_init(). - * @param edesc The egress descriptor to be posted. - * @return 0 on success. - */ -static inline int gxio_mpipe_equeue_put(gxio_mpipe_equeue_t *equeue, - gxio_mpipe_edesc_t edesc) -{ - int64_t slot = gxio_mpipe_equeue_reserve_fast(equeue, 1); - if (slot < 0) - return (int)slot; - - gxio_mpipe_equeue_put_at(equeue, edesc, slot); - - return 0; -} - -/* Ask the mPIPE hardware to egress outstanding packets immediately. - * - * This call is not necessary, but may slightly reduce overall latency. - * - * Technically, you should flush all gxio_mpipe_equeue_put_at() writes - * to memory before calling this function, to ensure the descriptors - * are visible in memory before the mPIPE hardware actually looks for - * them. But this should be very rare, and the only side effect would - * be increased latency, so it is up to the caller to decide whether - * or not to flush memory. - * - * @param equeue An egress queue initialized via gxio_mpipe_equeue_init(). - */ -static inline void gxio_mpipe_equeue_flush(gxio_mpipe_equeue_t *equeue) -{ - /* Use "ring_idx = 0" and "count = 0" to "wake up" the eDMA ring. */ - MPIPE_EDMA_POST_REGION_VAL_t val = { {0} }; - /* Flush the write buffers. */ - __insn_flushwb(); - __gxio_mmio_write(equeue->dma_queue.post_region_addr, val.word); -} - -/* Determine if a given edesc has been completed. - * - * Note that this function requires a "completion slot", and thus may - * NOT be used with a "slot" from gxio_mpipe_equeue_reserve_fast() or - * gxio_mpipe_equeue_try_reserve_fast(). - * - * @param equeue An egress queue initialized via gxio_mpipe_equeue_init(). - * @param completion_slot The completion slot used by the edesc. - * @param update If true, and the desc does not appear to have completed - * yet, then update any software cache of the hardware completion counter, - * and check again. This should normally be true. - * @return True iff the given edesc has been completed. - */ -static inline int gxio_mpipe_equeue_is_complete(gxio_mpipe_equeue_t *equeue, - int64_t completion_slot, - int update) -{ - return __gxio_dma_queue_is_complete(&equeue->dma_queue, - completion_slot, update); -} - -/* Set the snf (store and forward) size for an equeue. - * - * The snf size for an equeue defaults to 1536, and encodes the size - * of the largest packet for which egress is guaranteed to avoid - * transmission underruns and/or corrupt checksums under heavy load. - * - * The snf size affects a global resource pool which cannot support, - * for example, all 24 equeues each requesting an snf size of 8K. - * - * To ensure that jumbo packets can be egressed properly, the snf size - * should be set to the size of the largest possible packet, which - * will usually be limited by the size of the app's largest buffer. - * - * This is a convenience wrapper around - * gxio_mpipe_config_edma_ring_blks(). - * - * This function should not be called after any egress has been done - * on the equeue. - * - * @param equeue An egress queue initialized via gxio_mpipe_equeue_init(). - * @param size The snf size, in bytes. - * @return Zero on success, negative error otherwise. - */ -static inline int gxio_mpipe_equeue_set_snf_size(gxio_mpipe_equeue_t *equeue, - size_t size) -{ - int blks = (size + 127) / 128; - return gxio_mpipe_config_edma_ring_blks(equeue->context, equeue->ering, - blks + 1, blks, 1); -} - -/***************************************************************** - * Link Management * - ******************************************************************/ - -/* - * - * Functions for manipulating and sensing the state and configuration - * of physical network links. - * - * @section gxio_mpipe_link_perm Link Permissions - * - * Opening a link (with gxio_mpipe_link_open()) requests a set of link - * permissions, which control what may be done with the link, and potentially - * what permissions may be granted to other processes. - * - * Data permission allows the process to receive packets from the link by - * specifying the link's channel number in mPIPE packet distribution rules, - * and to send packets to the link by using the link's channel number as - * the target for an eDMA ring. - * - * Stats permission allows the process to retrieve link attributes (such as - * the speeds it is capable of running at, or whether it is currently up), and - * to read and write certain statistics-related registers in the link's MAC. - * - * Control permission allows the process to retrieve and modify link attributes - * (so that it may, for example, bring the link up and take it down), and - * read and write many registers in the link's MAC and PHY. - * - * Any permission may be requested as shared, which allows other processes - * to also request shared permission, or exclusive, which prevents other - * processes from requesting it. In keeping with GXIO's typical usage in - * an embedded environment, the defaults for all permissions are shared. - * - * Permissions are granted on a first-come, first-served basis, so if two - * applications request an exclusive permission on the same link, the one - * to run first will win. Note, however, that some system components, like - * the kernel Ethernet driver, may get an opportunity to open links before - * any applications run. - * - * @section gxio_mpipe_link_names Link Names - * - * Link names are of the form gbe<em>number</em> (for Gigabit Ethernet), - * xgbe<em>number</em> (for 10 Gigabit Ethernet), loop<em>number</em> (for - * internal mPIPE loopback), or ilk<em>number</em>/<em>channel</em> - * (for Interlaken links); for instance, gbe0, xgbe1, loop3, and - * ilk0/12 are all possible link names. The correspondence between - * the link name and an mPIPE instance number or mPIPE channel number is - * system-dependent; all links will not exist on all systems, and the set - * of numbers used for a particular link type may not start at zero and may - * not be contiguous. Use gxio_mpipe_link_enumerate() to retrieve the set of - * links which exist on a system, and always use gxio_mpipe_link_instance() - * to determine which mPIPE controls a particular link. - * - * Note that in some cases, links may share hardware, such as PHYs, or - * internal mPIPE buffers; in these cases, only one of the links may be - * opened at a time. This is especially common with xgbe and gbe ports, - * since each xgbe port uses 4 SERDES lanes, each of which may also be - * configured as one gbe port. - * - * @section gxio_mpipe_link_states Link States - * - * The mPIPE link management model revolves around three different states, - * which are maintained for each link: - * - * 1. The <em>current</em> link state: is the link up now, and if so, at - * what speed? - * - * 2. The <em>desired</em> link state: what do we want the link state to be? - * The system is always working to make this state the current state; - * thus, if the desired state is up, and the link is down, we'll be - * constantly trying to bring it up, automatically. - * - * 3. The <em>possible</em> link state: what speeds are valid for this - * particular link? Or, in other words, what are the capabilities of - * the link hardware? - * - * These link states are not, strictly speaking, related to application - * state; they may be manipulated at any time, whether or not the link - * is currently being used for data transfer. However, for convenience, - * gxio_mpipe_link_open() and gxio_mpipe_link_close() (or application exit) - * can affect the link state. These implicit link management operations - * may be modified or disabled by the use of link open flags. - * - * From an application, you can use gxio_mpipe_link_get_attr() - * and gxio_mpipe_link_set_attr() to manipulate the link states. - * gxio_mpipe_link_get_attr() with ::GXIO_MPIPE_LINK_POSSIBLE_STATE - * gets you the possible link state. gxio_mpipe_link_get_attr() with - * ::GXIO_MPIPE_LINK_CURRENT_STATE gets you the current link state. - * Finally, gxio_mpipe_link_set_attr() and gxio_mpipe_link_get_attr() - * with ::GXIO_MPIPE_LINK_DESIRED_STATE allow you to modify or retrieve - * the desired link state. - * - * If you want to manage a link from a part of your application which isn't - * involved in packet processing, you can use the ::GXIO_MPIPE_LINK_NO_DATA - * flags on a gxio_mpipe_link_open() call. This opens the link, but does - * not request data permission, so it does not conflict with any exclusive - * permissions which may be held by other processes. You can then can use - * gxio_mpipe_link_get_attr() and gxio_mpipe_link_set_attr() on this link - * object to bring up or take down the link. - * - * Some links support link state bits which support various loopback - * modes. ::GXIO_MPIPE_LINK_LOOP_MAC tests datapaths within the Tile - * Processor itself; ::GXIO_MPIPE_LINK_LOOP_PHY tests the datapath between - * the Tile Processor and the external physical layer interface chip; and - * ::GXIO_MPIPE_LINK_LOOP_EXT tests the entire network datapath with the - * aid of an external loopback connector. In addition to enabling hardware - * testing, such configuration can be useful for software testing, as well. - * - * When LOOP_MAC or LOOP_PHY is enabled, packets transmitted on a channel - * will be received by that channel, instead of being emitted on the - * physical link, and packets received on the physical link will be ignored. - * Other than that, all standard GXIO operations work as you might expect. - * Note that loopback operation requires that the link be brought up using - * one or more of the GXIO_MPIPE_LINK_SPEED_xxx link state bits. - * - * Those familiar with previous versions of the MDE on TILEPro hardware - * will notice significant similarities between the NetIO link management - * model and the mPIPE link management model. However, the NetIO model - * was developed in stages, and some of its features -- for instance, - * the default setting of certain flags -- were shaped by the need to be - * compatible with previous versions of NetIO. Since the features provided - * by the mPIPE hardware and the mPIPE GXIO library are significantly - * different than those provided by NetIO, in some cases, we have made - * different choices in the mPIPE link management API. Thus, please read - * this documentation carefully before assuming that mPIPE link management - * operations are exactly equivalent to their NetIO counterparts. - */ - -/* An object used to manage mPIPE link state and resources. */ -typedef struct { - /* The overall mPIPE context. */ - gxio_mpipe_context_t *context; - - /* The channel number used by this link. */ - uint8_t channel; - - /* The MAC index used by this link. */ - uint8_t mac; -} gxio_mpipe_link_t; - -/* Translate a link name to the instance number of the mPIPE shim which is - * connected to that link. This call does not verify whether the link is - * currently available, and does not reserve any link resources; - * gxio_mpipe_link_open() must be called to perform those functions. - * - * Typically applications will call this function to translate a link name - * to an mPIPE instance number; call gxio_mpipe_init(), passing it that - * instance number, to initialize the mPIPE shim; and then call - * gxio_mpipe_link_open(), passing it the same link name plus the mPIPE - * context, to configure the link. - * - * @param link_name Name of the link; see @ref gxio_mpipe_link_names. - * @return The mPIPE instance number which is associated with the named - * link, or a negative error code (::GXIO_ERR_NO_DEVICE) if the link does - * not exist. - */ -extern int gxio_mpipe_link_instance(const char *link_name); - -/* Retrieve one of this system's legal link names, and its MAC address. - * - * @param index Link name index. If a system supports N legal link names, - * then indices between 0 and N - 1, inclusive, each correspond to one of - * those names. Thus, to retrieve all of a system's legal link names, - * call this function in a loop, starting with an index of zero, and - * incrementing it once per iteration until -1 is returned. - * @param link_name Pointer to the buffer which will receive the retrieved - * link name. The buffer should contain space for at least - * ::GXIO_MPIPE_LINK_NAME_LEN bytes; the returned name, including the - * terminating null byte, will be no longer than that. - * @param link_name Pointer to the buffer which will receive the retrieved - * MAC address. The buffer should contain space for at least 6 bytes. - * @return Zero if a link name was successfully retrieved; -1 if one was - * not. - */ -extern int gxio_mpipe_link_enumerate_mac(int index, char *link_name, - uint8_t *mac_addr); - -/* Open an mPIPE link. - * - * A link must be opened before it may be used to send or receive packets, - * and before its state may be examined or changed. Depending up on the - * link's intended use, one or more link permissions may be requested via - * the flags parameter; see @ref gxio_mpipe_link_perm. In addition, flags - * may request that the link's state be modified at open time. See @ref - * gxio_mpipe_link_states and @ref gxio_mpipe_link_open_flags for more detail. - * - * @param link A link state object, which will be initialized if this - * function completes successfully. - * @param context An initialized mPIPE context. - * @param link_name Name of the link. - * @param flags Zero or more @ref gxio_mpipe_link_open_flags, ORed together. - * @return 0 if the link was successfully opened, or a negative error code. - * - */ -extern int gxio_mpipe_link_open(gxio_mpipe_link_t *link, - gxio_mpipe_context_t *context, - const char *link_name, unsigned int flags); - -/* Close an mPIPE link. - * - * Closing a link makes it available for use by other processes. Once - * a link has been closed, packets may no longer be sent on or received - * from the link, and its state may not be examined or changed. - * - * @param link A link state object, which will no longer be initialized - * if this function completes successfully. - * @return 0 if the link was successfully closed, or a negative error code. - * - */ -extern int gxio_mpipe_link_close(gxio_mpipe_link_t *link); - -/* Return a link's channel number. - * - * @param link A properly initialized link state object. - * @return The channel number for the link. - */ -static inline int gxio_mpipe_link_channel(gxio_mpipe_link_t *link) -{ - return link->channel; -} - -/* Set a link attribute. - * - * @param link A properly initialized link state object. - * @param attr An attribute from the set of @ref gxio_mpipe_link_attrs. - * @param val New value of the attribute. - * @return 0 if the attribute was successfully set, or a negative error - * code. - */ -extern int gxio_mpipe_link_set_attr(gxio_mpipe_link_t *link, uint32_t attr, - int64_t val); - -/////////////////////////////////////////////////////////////////// -// Timestamp // -/////////////////////////////////////////////////////////////////// - -/* Get the timestamp of mPIPE when this routine is called. - * - * @param context An initialized mPIPE context. - * @param ts A timespec structure to store the current clock. - * @return If the call was successful, zero; otherwise, a negative error - * code. - */ -extern int gxio_mpipe_get_timestamp(gxio_mpipe_context_t *context, - struct timespec64 *ts); - -/* Set the timestamp of mPIPE. - * - * @param context An initialized mPIPE context. - * @param ts A timespec structure to store the requested clock. - * @return If the call was successful, zero; otherwise, a negative error - * code. - */ -extern int gxio_mpipe_set_timestamp(gxio_mpipe_context_t *context, - const struct timespec64 *ts); - -/* Adjust the timestamp of mPIPE. - * - * @param context An initialized mPIPE context. - * @param delta A signed time offset to adjust, in nanoseconds. - * The absolute value of this parameter must be less than or - * equal to 1000000000. - * @return If the call was successful, zero; otherwise, a negative error - * code. - */ -extern int gxio_mpipe_adjust_timestamp(gxio_mpipe_context_t *context, - int64_t delta); - -/** Adjust the mPIPE timestamp clock frequency. - * - * @param context An initialized mPIPE context. - * @param ppb A 32-bit signed PPB (Parts Per Billion) value to adjust. - * The absolute value of ppb must be less than or equal to 1000000000. - * Values less than about 30000 will generally cause a GXIO_ERR_INVAL - * return due to the granularity of the hardware that converts reference - * clock cycles into seconds and nanoseconds. - * @return If the call was successful, zero; otherwise, a negative error - * code. - */ -extern int gxio_mpipe_adjust_timestamp_freq(gxio_mpipe_context_t* context, - int32_t ppb); - -#endif /* !_GXIO_MPIPE_H_ */ diff --git a/arch/tile/include/gxio/trio.h b/arch/tile/include/gxio/trio.h deleted file mode 100644 index df10a662cc25..000000000000 --- a/arch/tile/include/gxio/trio.h +++ /dev/null @@ -1,298 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* - * - * An API for allocating, configuring, and manipulating TRIO hardware - * resources - */ - -/* - * - * The TILE-Gx TRIO shim provides connections to external devices via - * PCIe or other transaction IO standards. The gxio_trio_ API, - * declared in <gxio/trio.h>, allows applications to allocate and - * configure TRIO IO resources like DMA command rings, memory map - * windows, and device interrupts. The following sections introduce - * the various components of the API. We strongly recommend reading - * the TRIO section of the IO Device Guide (UG404) before working with - * this API. - * - * @section trio__ingress TRIO Ingress Hardware Resources - * - * The TRIO ingress hardware is responsible for examining incoming - * PCIe or StreamIO packets and choosing a processing mechanism based - * on the packets' bus address. The gxio_trio_ API can be used to - * configure different handlers for different ranges of bus address - * space. The user can configure "mapped memory" and "scatter queue" - * regions to match incoming packets within 4kB-aligned ranges of bus - * addresses. Each range specifies a different set of mapping - * parameters to be applied when handling the ingress packet. The - * following sections describe how to work with MapMem and scatter - * queue regions. - * - * @subsection trio__mapmem TRIO MapMem Regions - * - * TRIO mapped memory (or MapMem) regions allow the user to map - * incoming read and write requests directly to the application's - * memory space. MapMem regions are allocated via - * gxio_trio_alloc_memory_maps(). Given an integer MapMem number, - * applications can use gxio_trio_init_memory_map() to specify the - * range of bus addresses that will match the region and the range of - * virtual addresses to which those packets will be applied. - * - * As with many other gxio APIs, the programmer must be sure to - * register memory pages that will be used with MapMem regions. Pages - * can be registered with TRIO by allocating an ASID (address space - * identifier) and then using gxio_trio_register_page() to register up to - * 16 pages with the hardware. The initialization functions for - * resources that require registered memory (MapMem, scatter queues, - * push DMA, and pull DMA) then take an 'asid' parameter in order to - * configure which set of registered pages is used by each resource. - * - * @subsection trio__scatter_queue TRIO Scatter Queues - * - * The TRIO shim's scatter queue regions allow users to dynamically - * map buffers from a large address space into a small range of bus - * addresses. This is particularly helpful for PCIe endpoint devices, - * where the host generally limits the size of BARs to tens of - * megabytes. - * - * Each scatter queue consists of a memory map region, a queue of - * tile-side buffer VAs to be mapped to that region, and a bus-mapped - * "doorbell" register that the remote endpoint can write to trigger a - * dequeue of the current buffer VA, thus swapping in a new buffer. - * The VAs pushed onto a scatter queue must be 4kB aligned, so - * applications may need to use higher-level protocols to inform - * remote entities that they should apply some additional, sub-4kB - * offset when reading or writing the scatter queue region. For more - * information, see the IO Device Guide (UG404). - * - * @section trio__egress TRIO Egress Hardware Resources - * - * The TRIO shim supports two mechanisms for egress packet generation: - * programmed IO (PIO) and push/pull DMA. PIO allows applications to - * create MMIO mappings for PCIe or StreamIO address space, such that - * the application can generate word-sized read or write transactions - * by issuing load or store instructions. Push and pull DMA are tuned - * for larger transactions; they use specialized hardware engines to - * transfer large blocks of data at line rate. - * - * @subsection trio__pio TRIO Programmed IO - * - * Programmed IO allows applications to create MMIO mappings for PCIe - * or StreamIO address space. The hardware PIO regions support access - * to PCIe configuration, IO, and memory space, but the gxio_trio API - * only supports memory space accesses. PIO regions are allocated - * with gxio_trio_alloc_pio_regions() and initialized via - * gxio_trio_init_pio_region(). Once a region is bound to a range of - * bus address via the initialization function, the application can - * use gxio_trio_map_pio_region() to create MMIO mappings from its VA - * space onto the range of bus addresses supported by the PIO region. - * - * @subsection trio_dma TRIO Push and Pull DMA - * - * The TRIO push and pull DMA engines allow users to copy blocks of - * data between application memory and the bus. Push DMA generates - * write packets that copy from application memory to the bus and pull - * DMA generates read packets that copy from the bus into application - * memory. The DMA engines are managed via an API that is very - * similar to the mPIPE eDMA interface. For a detailed explanation of - * the eDMA queue API, see @ref gxio_mpipe_wrappers. - * - * Push and pull DMA queues are allocated via - * gxio_trio_alloc_push_dma_ring() / gxio_trio_alloc_pull_dma_ring(). - * Once allocated, users generally use a ::gxio_trio_dma_queue_t - * object to manage the queue, providing easy wrappers for reserving - * command slots in the DMA command ring, filling those slots, and - * waiting for commands to complete. DMA queues can be initialized - * via gxio_trio_init_push_dma_queue() or - * gxio_trio_init_pull_dma_queue(). - * - * See @ref trio/push_dma/app.c for an example of how to use push DMA. - * - * @section trio_shortcomings Plans for Future API Revisions - * - * The simulation framework is incomplete. Future features include: - * - * - Support for reset and deallocation of resources. - * - * - Support for pull DMA. - * - * - Support for interrupt regions and user-space interrupt delivery. - * - * - Support for getting BAR mappings and reserving regions of BAR - * address space. - */ -#ifndef _GXIO_TRIO_H_ -#define _GXIO_TRIO_H_ - -#include <linux/types.h> - -#include <gxio/common.h> -#include <gxio/dma_queue.h> - -#include <arch/trio_constants.h> -#include <arch/trio.h> -#include <arch/trio_pcie_intfc.h> -#include <arch/trio_pcie_rc.h> -#include <arch/trio_shm.h> -#include <hv/drv_trio_intf.h> -#include <hv/iorpc.h> - -/* A context object used to manage TRIO hardware resources. */ -typedef struct { - - /* File descriptor for calling up to Linux (and thus the HV). */ - int fd; - - /* The VA at which the MAC MMIO registers are mapped. */ - char *mmio_base_mac; - - /* The VA at which the PIO config space are mapped for each PCIe MAC. - Gx36 has max 3 PCIe MACs per TRIO shim. */ - char *mmio_base_pio_cfg[TILEGX_TRIO_PCIES]; - -#ifdef USE_SHARED_PCIE_CONFIG_REGION - /* Index of the shared PIO region for PCI config access. */ - int pio_cfg_index; -#else - /* Index of the PIO region for PCI config access per MAC. */ - int pio_cfg_index[TILEGX_TRIO_PCIES]; -#endif - - /* The VA at which the push DMA MMIO registers are mapped. */ - char *mmio_push_dma[TRIO_NUM_PUSH_DMA_RINGS]; - - /* The VA at which the pull DMA MMIO registers are mapped. */ - char *mmio_pull_dma[TRIO_NUM_PUSH_DMA_RINGS]; - - /* Application space ID. */ - unsigned int asid; - -} gxio_trio_context_t; - -/* Command descriptor for push or pull DMA. */ -typedef TRIO_DMA_DESC_t gxio_trio_dma_desc_t; - -/* A convenient, thread-safe interface to an eDMA ring. */ -typedef struct { - - /* State object for tracking head and tail pointers. */ - __gxio_dma_queue_t dma_queue; - - /* The ring entries. */ - gxio_trio_dma_desc_t *dma_descs; - - /* The number of entries minus one. */ - unsigned long mask_num_entries; - - /* The log2() of the number of entries. */ - unsigned int log2_num_entries; - -} gxio_trio_dma_queue_t; - -/* Initialize a TRIO context. - * - * This function allocates a TRIO "service domain" and maps the MMIO - * registers into the the caller's VA space. - * - * @param trio_index Which TRIO shim; Gx36 must pass 0. - * @param context Context object to be initialized. - */ -extern int gxio_trio_init(gxio_trio_context_t *context, - unsigned int trio_index); - -/* This indicates that an ASID hasn't been allocated. */ -#define GXIO_ASID_NULL -1 - -/* Ordering modes for map memory regions and scatter queue regions. */ -typedef enum gxio_trio_order_mode_e { - /* Writes are not ordered. Reads always wait for previous writes. */ - GXIO_TRIO_ORDER_MODE_UNORDERED = - TRIO_MAP_MEM_SETUP__ORDER_MODE_VAL_UNORDERED, - /* Both writes and reads wait for previous transactions to complete. */ - GXIO_TRIO_ORDER_MODE_STRICT = - TRIO_MAP_MEM_SETUP__ORDER_MODE_VAL_STRICT, - /* Writes are ordered unless the incoming packet has the - relaxed-ordering attributes set. */ - GXIO_TRIO_ORDER_MODE_OBEY_PACKET = - TRIO_MAP_MEM_SETUP__ORDER_MODE_VAL_REL_ORD -} gxio_trio_order_mode_t; - -/* Initialize a memory mapping region. - * - * @param context An initialized TRIO context. - * @param map A Memory map region allocated by gxio_trio_alloc_memory_map(). - * @param target_mem VA of backing memory, should be registered via - * gxio_trio_register_page() and aligned to 4kB. - * @param target_size Length of the memory mapping, must be a multiple - * of 4kB. - * @param asid ASID to be used for Tile-side address translation. - * @param mac MAC number. - * @param bus_address Bus address at which the mapping starts. - * @param order_mode Memory ordering mode for this mapping. - * @return Zero on success, else ::GXIO_TRIO_ERR_BAD_MEMORY_MAP, - * GXIO_TRIO_ERR_BAD_ASID, or ::GXIO_TRIO_ERR_BAD_BUS_RANGE. - */ -extern int gxio_trio_init_memory_map(gxio_trio_context_t *context, - unsigned int map, void *target_mem, - size_t target_size, unsigned int asid, - unsigned int mac, uint64_t bus_address, - gxio_trio_order_mode_t order_mode); - -/* Flags that can be passed to resource allocation functions. */ -enum gxio_trio_alloc_flags_e { - GXIO_TRIO_ALLOC_FIXED = HV_TRIO_ALLOC_FIXED, -}; - -/* Flags that can be passed to memory registration functions. */ -enum gxio_trio_mem_flags_e { - /* Do not fill L3 when writing, and invalidate lines upon egress. */ - GXIO_TRIO_MEM_FLAG_NT_HINT = IORPC_MEM_BUFFER_FLAG_NT_HINT, - - /* L3 cache fills should only populate IO cache ways. */ - GXIO_TRIO_MEM_FLAG_IO_PIN = IORPC_MEM_BUFFER_FLAG_IO_PIN, -}; - -/* Flag indicating a request generator uses a special traffic - class. */ -#define GXIO_TRIO_FLAG_TRAFFIC_CLASS(N) HV_TRIO_FLAG_TC(N) - -/* Flag indicating a request generator uses a virtual function - number. */ -#define GXIO_TRIO_FLAG_VFUNC(N) HV_TRIO_FLAG_VFUNC(N) - -/***************************************************************** - * Memory Registration * - ******************************************************************/ - -/* Allocate Application Space Identifiers (ASIDs). Each ASID can - * register up to 16 page translations. ASIDs are used by memory map - * regions, scatter queues, and DMA queues to translate application - * VAs into memory system PAs. - * - * @param context An initialized TRIO context. - * @param count Number of ASIDs required. - * @param first Index of first ASID if ::GXIO_TRIO_ALLOC_FIXED flag - * is set, otherwise ignored. - * @param flags Flag bits, including bits from ::gxio_trio_alloc_flags_e. - * @return Index of first ASID, or ::GXIO_TRIO_ERR_NO_ASID if allocation - * failed. - */ -extern int gxio_trio_alloc_asids(gxio_trio_context_t *context, - unsigned int count, unsigned int first, - unsigned int flags); - -#endif /* ! _GXIO_TRIO_H_ */ diff --git a/arch/tile/include/gxio/uart.h b/arch/tile/include/gxio/uart.h deleted file mode 100644 index 438ee7e46c7b..000000000000 --- a/arch/tile/include/gxio/uart.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright 2013 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _GXIO_UART_H_ -#define _GXIO_UART_H_ - -#include "common.h" - -#include <hv/drv_uart_intf.h> -#include <hv/iorpc.h> - -/* - * - * An API for manipulating UART interface. - */ - -/* - * - * The Rshim allows access to the processor's UART interface. - */ - -/* A context object used to manage UART resources. */ -typedef struct { - - /* File descriptor for calling up to the hypervisor. */ - int fd; - - /* The VA at which our MMIO registers are mapped. */ - char *mmio_base; - -} gxio_uart_context_t; - -/* Request UART interrupts. - * - * Request that interrupts be delivered to a tile when the UART's - * Receive FIFO is written, or the Write FIFO is read. - * - * @param context Pointer to a properly initialized gxio_uart_context_t. - * @param bind_cpu_x X coordinate of CPU to which interrupt will be delivered. - * @param bind_cpu_y Y coordinate of CPU to which interrupt will be delivered. - * @param bind_interrupt IPI interrupt number. - * @param bind_event Sub-interrupt event bit number; a negative value can - * disable the interrupt. - * @return Zero if all of the requested UART events were successfully - * configured to interrupt. - */ -extern int gxio_uart_cfg_interrupt(gxio_uart_context_t *context, - int bind_cpu_x, - int bind_cpu_y, - int bind_interrupt, int bind_event); - -/* Initialize a UART context. - * - * A properly initialized context must be obtained before any of the other - * gxio_uart routines may be used. - * - * @param context Pointer to a gxio_uart_context_t, which will be initialized - * by this routine, if it succeeds. - * @param uart_index Index of the UART to use. - * @return Zero if the context was successfully initialized, else a - * GXIO_ERR_xxx error code. - */ -extern int gxio_uart_init(gxio_uart_context_t *context, int uart_index); - -/* Destroy a UART context. - * - * Once destroyed, a context may not be used with any gxio_uart routines - * other than gxio_uart_init(). After this routine returns, no further - * interrupts requested on this context will be delivered. The state and - * configuration of the pins which had been attached to this context are - * unchanged by this operation. - * - * @param context Pointer to a gxio_uart_context_t. - * @return Zero if the context was successfully destroyed, else a - * GXIO_ERR_xxx error code. - */ -extern int gxio_uart_destroy(gxio_uart_context_t *context); - -/* Write UART register. - * @param context Pointer to a gxio_uart_context_t. - * @param offset UART register offset. - * @param word Data will be wrote to UART reigister. - */ -extern void gxio_uart_write(gxio_uart_context_t *context, uint64_t offset, - uint64_t word); - -/* Read UART register. - * @param context Pointer to a gxio_uart_context_t. - * @param offset UART register offset. - * @return Data read from UART register. - */ -extern uint64_t gxio_uart_read(gxio_uart_context_t *context, uint64_t offset); - -#endif /* _GXIO_UART_H_ */ diff --git a/arch/tile/include/gxio/usb_host.h b/arch/tile/include/gxio/usb_host.h deleted file mode 100644 index 93c9636d2dd7..000000000000 --- a/arch/tile/include/gxio/usb_host.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ -#ifndef _GXIO_USB_H_ -#define _GXIO_USB_H_ - -#include <gxio/common.h> - -#include <hv/drv_usb_host_intf.h> -#include <hv/iorpc.h> - -/* - * - * An API for manipulating general-purpose I/O pins. - */ - -/* - * - * The USB shim allows access to the processor's Universal Serial Bus - * connections. - */ - -/* A context object used to manage USB hardware resources. */ -typedef struct { - - /* File descriptor for calling up to the hypervisor. */ - int fd; - - /* The VA at which our MMIO registers are mapped. */ - char *mmio_base; -} gxio_usb_host_context_t; - -/* Initialize a USB context. - * - * A properly initialized context must be obtained before any of the other - * gxio_usb_host routines may be used. - * - * @param context Pointer to a gxio_usb_host_context_t, which will be - * initialized by this routine, if it succeeds. - * @param usb_index Index of the USB shim to use. - * @param is_ehci Nonzero to use the EHCI interface; zero to use the OHCI - * intereface. - * @return Zero if the context was successfully initialized, else a - * GXIO_ERR_xxx error code. - */ -extern int gxio_usb_host_init(gxio_usb_host_context_t *context, int usb_index, - int is_ehci); - -/* Destroy a USB context. - * - * Once destroyed, a context may not be used with any gxio_usb_host routines - * other than gxio_usb_host_init(). After this routine returns, no further - * interrupts or signals requested on this context will be delivered. The - * state and configuration of the pins which had been attached to this - * context are unchanged by this operation. - * - * @param context Pointer to a gxio_usb_host_context_t. - * @return Zero if the context was successfully destroyed, else a - * GXIO_ERR_xxx error code. - */ -extern int gxio_usb_host_destroy(gxio_usb_host_context_t *context); - -/* Retrieve the address of the shim's MMIO registers. - * - * @param context Pointer to a properly initialized gxio_usb_host_context_t. - * @return The address of the shim's MMIO registers. - */ -extern void *gxio_usb_host_get_reg_start(gxio_usb_host_context_t *context); - -/* Retrieve the length of the shim's MMIO registers. - * - * @param context Pointer to a properly initialized gxio_usb_host_context_t. - * @return The length of the shim's MMIO registers. - */ -extern size_t gxio_usb_host_get_reg_len(gxio_usb_host_context_t *context); - -#endif /* _GXIO_USB_H_ */ diff --git a/arch/tile/include/hv/drv_mpipe_intf.h b/arch/tile/include/hv/drv_mpipe_intf.h deleted file mode 100644 index ff7f50f970a5..000000000000 --- a/arch/tile/include/hv/drv_mpipe_intf.h +++ /dev/null @@ -1,605 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/** - * Interface definitions for the mpipe driver. - */ - -#ifndef _SYS_HV_DRV_MPIPE_INTF_H -#define _SYS_HV_DRV_MPIPE_INTF_H - -#include <arch/mpipe.h> -#include <arch/mpipe_constants.h> - - -/** Number of mPIPE instances supported */ -#define HV_MPIPE_INSTANCE_MAX (2) - -/** Number of buffer stacks (32). */ -#define HV_MPIPE_NUM_BUFFER_STACKS \ - (MPIPE_MMIO_INIT_DAT_GX36_1__BUFFER_STACK_MASK_WIDTH) - -/** Number of NotifRings (256). */ -#define HV_MPIPE_NUM_NOTIF_RINGS (MPIPE_NUM_NOTIF_RINGS) - -/** Number of NotifGroups (32). */ -#define HV_MPIPE_NUM_NOTIF_GROUPS (MPIPE_NUM_NOTIF_GROUPS) - -/** Number of buckets (4160). */ -#define HV_MPIPE_NUM_BUCKETS (MPIPE_NUM_BUCKETS) - -/** Number of "lo" buckets (4096). */ -#define HV_MPIPE_NUM_LO_BUCKETS 4096 - -/** Number of "hi" buckets (64). */ -#define HV_MPIPE_NUM_HI_BUCKETS \ - (HV_MPIPE_NUM_BUCKETS - HV_MPIPE_NUM_LO_BUCKETS) - -/** Number of edma rings (24). */ -#define HV_MPIPE_NUM_EDMA_RINGS \ - (MPIPE_MMIO_INIT_DAT_GX36_1__EDMA_POST_MASK_WIDTH) - - - - -/** A flag bit indicating a fixed resource allocation. */ -#define HV_MPIPE_ALLOC_FIXED 0x01 - -/** Offset for the config register MMIO region. */ -#define HV_MPIPE_CONFIG_MMIO_OFFSET \ - (MPIPE_MMIO_ADDR__REGION_VAL_CFG << MPIPE_MMIO_ADDR__REGION_SHIFT) - -/** Size of the config register MMIO region. */ -#define HV_MPIPE_CONFIG_MMIO_SIZE (64 * 1024) - -/** Offset for the config register MMIO region. */ -#define HV_MPIPE_FAST_MMIO_OFFSET \ - (MPIPE_MMIO_ADDR__REGION_VAL_IDMA << MPIPE_MMIO_ADDR__REGION_SHIFT) - -/** Size of the fast register MMIO region (IDMA, EDMA, buffer stack). */ -#define HV_MPIPE_FAST_MMIO_SIZE \ - ((MPIPE_MMIO_ADDR__REGION_VAL_BSM + 1 - MPIPE_MMIO_ADDR__REGION_VAL_IDMA) \ - << MPIPE_MMIO_ADDR__REGION_SHIFT) - - -/* - * Each type of resource allocation comes in quantized chunks, where - * XXX_BITS is the number of chunks, and XXX_RES_PER_BIT is the number - * of resources in each chunk. - */ - -/** Number of buffer stack chunks available (32). */ -#define HV_MPIPE_ALLOC_BUFFER_STACKS_BITS \ - MPIPE_MMIO_INIT_DAT_GX36_1__BUFFER_STACK_MASK_WIDTH - -/** Granularity of buffer stack allocation (1). */ -#define HV_MPIPE_ALLOC_BUFFER_STACKS_RES_PER_BIT \ - (HV_MPIPE_NUM_BUFFER_STACKS / HV_MPIPE_ALLOC_BUFFER_STACKS_BITS) - -/** Number of NotifRing chunks available (32). */ -#define HV_MPIPE_ALLOC_NOTIF_RINGS_BITS \ - MPIPE_MMIO_INIT_DAT_GX36_0__NOTIF_RING_MASK_WIDTH - -/** Granularity of NotifRing allocation (8). */ -#define HV_MPIPE_ALLOC_NOTIF_RINGS_RES_PER_BIT \ - (HV_MPIPE_NUM_NOTIF_RINGS / HV_MPIPE_ALLOC_NOTIF_RINGS_BITS) - -/** Number of NotifGroup chunks available (32). */ -#define HV_MPIPE_ALLOC_NOTIF_GROUPS_BITS \ - HV_MPIPE_NUM_NOTIF_GROUPS - -/** Granularity of NotifGroup allocation (1). */ -#define HV_MPIPE_ALLOC_NOTIF_GROUPS_RES_PER_BIT \ - (HV_MPIPE_NUM_NOTIF_GROUPS / HV_MPIPE_ALLOC_NOTIF_GROUPS_BITS) - -/** Number of lo bucket chunks available (16). */ -#define HV_MPIPE_ALLOC_LO_BUCKETS_BITS \ - MPIPE_MMIO_INIT_DAT_GX36_0__BUCKET_RELEASE_MASK_LO_WIDTH - -/** Granularity of lo bucket allocation (256). */ -#define HV_MPIPE_ALLOC_LO_BUCKETS_RES_PER_BIT \ - (HV_MPIPE_NUM_LO_BUCKETS / HV_MPIPE_ALLOC_LO_BUCKETS_BITS) - -/** Number of hi bucket chunks available (16). */ -#define HV_MPIPE_ALLOC_HI_BUCKETS_BITS \ - MPIPE_MMIO_INIT_DAT_GX36_0__BUCKET_RELEASE_MASK_HI_WIDTH - -/** Granularity of hi bucket allocation (4). */ -#define HV_MPIPE_ALLOC_HI_BUCKETS_RES_PER_BIT \ - (HV_MPIPE_NUM_HI_BUCKETS / HV_MPIPE_ALLOC_HI_BUCKETS_BITS) - -/** Number of eDMA ring chunks available (24). */ -#define HV_MPIPE_ALLOC_EDMA_RINGS_BITS \ - MPIPE_MMIO_INIT_DAT_GX36_1__EDMA_POST_MASK_WIDTH - -/** Granularity of eDMA ring allocation (1). */ -#define HV_MPIPE_ALLOC_EDMA_RINGS_RES_PER_BIT \ - (HV_MPIPE_NUM_EDMA_RINGS / HV_MPIPE_ALLOC_EDMA_RINGS_BITS) - - - - -/** Bit vector encoding which NotifRings are in a NotifGroup. */ -typedef struct -{ - /** The actual bits. */ - uint64_t ring_mask[4]; - -} gxio_mpipe_notif_group_bits_t; - - -/** Another name for MPIPE_LBL_INIT_DAT_BSTS_TBL_t. */ -typedef MPIPE_LBL_INIT_DAT_BSTS_TBL_t gxio_mpipe_bucket_info_t; - - - -/** Eight buffer stack ids. */ -typedef struct -{ - /** The stacks. */ - uint8_t stacks[8]; - -} gxio_mpipe_rules_stacks_t; - - -/** A destination mac address. */ -typedef struct -{ - /** The octets. */ - uint8_t octets[6]; - -} gxio_mpipe_rules_dmac_t; - - -/** A vlan. */ -typedef uint16_t gxio_mpipe_rules_vlan_t; - - - -/** Maximum number of characters in a link name. */ -#define GXIO_MPIPE_LINK_NAME_LEN 32 - - -/** Structure holding a link name. Only needed, and only typedef'ed, - * because the IORPC stub generator only handles types which are single - * words coming before the parameter name. */ -typedef struct -{ - /** The name itself. */ - char name[GXIO_MPIPE_LINK_NAME_LEN]; -} -_gxio_mpipe_link_name_t; - -/** Maximum number of characters in a symbol name. */ -#define GXIO_MPIPE_SYMBOL_NAME_LEN 128 - - -/** Structure holding a symbol name. Only needed, and only typedef'ed, - * because the IORPC stub generator only handles types which are single - * words coming before the parameter name. */ -typedef struct -{ - /** The name itself. */ - char name[GXIO_MPIPE_SYMBOL_NAME_LEN]; -} -_gxio_mpipe_symbol_name_t; - - -/** Structure holding a MAC address. */ -typedef struct -{ - /** The address. */ - uint8_t mac[6]; -} -_gxio_mpipe_link_mac_t; - - - -/** Request shared data permission -- that is, the ability to send and - * receive packets -- on the specified link. Other processes may also - * request shared data permission on the same link. - * - * No more than one of ::GXIO_MPIPE_LINK_DATA, ::GXIO_MPIPE_LINK_NO_DATA, - * or ::GXIO_MPIPE_LINK_EXCL_DATA may be specified in a gxio_mpipe_link_open() - * call. If none are specified, ::GXIO_MPIPE_LINK_DATA is assumed. - */ -#define GXIO_MPIPE_LINK_DATA 0x00000001UL - -/** Do not request data permission on the specified link. - * - * No more than one of ::GXIO_MPIPE_LINK_DATA, ::GXIO_MPIPE_LINK_NO_DATA, - * or ::GXIO_MPIPE_LINK_EXCL_DATA may be specified in a gxio_mpipe_link_open() - * call. If none are specified, ::GXIO_MPIPE_LINK_DATA is assumed. - */ -#define GXIO_MPIPE_LINK_NO_DATA 0x00000002UL - -/** Request exclusive data permission -- that is, the ability to send and - * receive packets -- on the specified link. No other processes may - * request data permission on this link, and if any process already has - * data permission on it, this open will fail. - * - * No more than one of ::GXIO_MPIPE_LINK_DATA, ::GXIO_MPIPE_LINK_NO_DATA, - * or ::GXIO_MPIPE_LINK_EXCL_DATA may be specified in a gxio_mpipe_link_open() - * call. If none are specified, ::GXIO_MPIPE_LINK_DATA is assumed. - */ -#define GXIO_MPIPE_LINK_EXCL_DATA 0x00000004UL - -/** Request shared stats permission -- that is, the ability to read and write - * registers which contain link statistics, and to get link attributes -- - * on the specified link. Other processes may also request shared stats - * permission on the same link. - * - * No more than one of ::GXIO_MPIPE_LINK_STATS, ::GXIO_MPIPE_LINK_NO_STATS, - * or ::GXIO_MPIPE_LINK_EXCL_STATS may be specified in a gxio_mpipe_link_open() - * call. If none are specified, ::GXIO_MPIPE_LINK_STATS is assumed. - */ -#define GXIO_MPIPE_LINK_STATS 0x00000008UL - -/** Do not request stats permission on the specified link. - * - * No more than one of ::GXIO_MPIPE_LINK_STATS, ::GXIO_MPIPE_LINK_NO_STATS, - * or ::GXIO_MPIPE_LINK_EXCL_STATS may be specified in a gxio_mpipe_link_open() - * call. If none are specified, ::GXIO_MPIPE_LINK_STATS is assumed. - */ -#define GXIO_MPIPE_LINK_NO_STATS 0x00000010UL - -/** Request exclusive stats permission -- that is, the ability to read and - * write registers which contain link statistics, and to get link - * attributes -- on the specified link. No other processes may request - * stats permission on this link, and if any process already - * has stats permission on it, this open will fail. - * - * Requesting exclusive stats permission is normally a very bad idea, since - * it prevents programs like mpipe-stat from providing information on this - * link. Applications should only do this if they use MAC statistics - * registers, and cannot tolerate any of the clear-on-read registers being - * reset by other statistics programs. - * - * No more than one of ::GXIO_MPIPE_LINK_STATS, ::GXIO_MPIPE_LINK_NO_STATS, - * or ::GXIO_MPIPE_LINK_EXCL_STATS may be specified in a gxio_mpipe_link_open() - * call. If none are specified, ::GXIO_MPIPE_LINK_STATS is assumed. - */ -#define GXIO_MPIPE_LINK_EXCL_STATS 0x00000020UL - -/** Request shared control permission -- that is, the ability to modify link - * attributes, and read and write MAC and MDIO registers -- on the - * specified link. Other processes may also request shared control - * permission on the same link. - * - * No more than one of ::GXIO_MPIPE_LINK_CTL, ::GXIO_MPIPE_LINK_NO_CTL, - * or ::GXIO_MPIPE_LINK_EXCL_CTL may be specified in a gxio_mpipe_link_open() - * call. If none are specified, ::GXIO_MPIPE_LINK_CTL is assumed. - */ -#define GXIO_MPIPE_LINK_CTL 0x00000040UL - -/** Do not request control permission on the specified link. - * - * No more than one of ::GXIO_MPIPE_LINK_CTL, ::GXIO_MPIPE_LINK_NO_CTL, - * or ::GXIO_MPIPE_LINK_EXCL_CTL may be specified in a gxio_mpipe_link_open() - * call. If none are specified, ::GXIO_MPIPE_LINK_CTL is assumed. - */ -#define GXIO_MPIPE_LINK_NO_CTL 0x00000080UL - -/** Request exclusive control permission -- that is, the ability to modify - * link attributes, and read and write MAC and MDIO registers -- on the - * specified link. No other processes may request control permission on - * this link, and if any process already has control permission on it, - * this open will fail. - * - * Requesting exclusive control permission is not always a good idea, since - * it prevents programs like mpipe-link from configuring the link. - * - * No more than one of ::GXIO_MPIPE_LINK_CTL, ::GXIO_MPIPE_LINK_NO_CTL, - * or ::GXIO_MPIPE_LINK_EXCL_CTL may be specified in a gxio_mpipe_link_open() - * call. If none are specified, ::GXIO_MPIPE_LINK_CTL is assumed. - */ -#define GXIO_MPIPE_LINK_EXCL_CTL 0x00000100UL - -/** Set the desired state of the link to up, allowing any speeds which are - * supported by the link hardware, as part of this open operation; do not - * change the desired state of the link when it is closed or the process - * exits. No more than one of ::GXIO_MPIPE_LINK_AUTO_UP, - * ::GXIO_MPIPE_LINK_AUTO_UPDOWN, ::GXIO_MPIPE_LINK_AUTO_DOWN, or - * ::GXIO_MPIPE_LINK_AUTO_NONE may be specified in a gxio_mpipe_link_open() - * call. If none are specified, ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed. - */ -#define GXIO_MPIPE_LINK_AUTO_UP 0x00000200UL - -/** Set the desired state of the link to up, allowing any speeds which are - * supported by the link hardware, as part of this open operation; when the - * link is closed or this process exits, if no other process has the link - * open, set the desired state of the link to down. No more than one of - * ::GXIO_MPIPE_LINK_AUTO_UP, ::GXIO_MPIPE_LINK_AUTO_UPDOWN, - * ::GXIO_MPIPE_LINK_AUTO_DOWN, or ::GXIO_MPIPE_LINK_AUTO_NONE may be - * specified in a gxio_mpipe_link_open() call. If none are specified, - * ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed. - */ -#define GXIO_MPIPE_LINK_AUTO_UPDOWN 0x00000400UL - -/** Do not change the desired state of the link as part of the open - * operation; when the link is closed or this process exits, if no other - * process has the link open, set the desired state of the link to down. - * No more than one of ::GXIO_MPIPE_LINK_AUTO_UP, - * ::GXIO_MPIPE_LINK_AUTO_UPDOWN, ::GXIO_MPIPE_LINK_AUTO_DOWN, or - * ::GXIO_MPIPE_LINK_AUTO_NONE may be specified in a gxio_mpipe_link_open() - * call. If none are specified, ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed. - */ -#define GXIO_MPIPE_LINK_AUTO_DOWN 0x00000800UL - -/** Do not change the desired state of the link as part of the open - * operation; do not change the desired state of the link when it is - * closed or the process exits. No more than one of - * ::GXIO_MPIPE_LINK_AUTO_UP, ::GXIO_MPIPE_LINK_AUTO_UPDOWN, - * ::GXIO_MPIPE_LINK_AUTO_DOWN, or ::GXIO_MPIPE_LINK_AUTO_NONE may be - * specified in a gxio_mpipe_link_open() call. If none are specified, - * ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed. - */ -#define GXIO_MPIPE_LINK_AUTO_NONE 0x00001000UL - -/** Request that this open call not complete until the network link is up. - * The process will wait as long as necessary for this to happen; - * applications which wish to abandon waiting for the link after a - * specific time period should not specify this flag when opening a link, - * but should instead call gxio_mpipe_link_wait() afterward. The link - * must be opened with stats permission. Note that this flag by itself - * does not change the desired link state; if other open flags or previous - * link state changes have not requested a desired state of up, the open - * call will never complete. This flag is not available to kernel - * clients. - */ -#define GXIO_MPIPE_LINK_WAIT 0x00002000UL - - -/* - * Note: link attributes must fit in 24 bits, since we use the top 8 bits - * of the IORPC offset word for the channel number. - */ - -/** Determine whether jumbo frames may be received. If this attribute's - * value value is nonzero, the MAC will accept frames of up to 10240 bytes. - * If the value is zero, the MAC will only accept frames of up to 1544 - * bytes. The default value is zero. */ -#define GXIO_MPIPE_LINK_RECEIVE_JUMBO 0x010000 - -/** Determine whether to send pause frames on this link if the mPIPE packet - * FIFO is nearly full. If the value is zero, pause frames are not sent. - * If the value is nonzero, it is the delay value which will be sent in any - * pause frames which are output, in units of 512 bit times. - * - * Bear in mind that in almost all circumstances, the mPIPE packet FIFO - * will never fill up, since mPIPE will empty it as fast as or faster than - * the incoming data rate, by either delivering or dropping packets. The - * only situation in which this is not true is if the memory and cache - * subsystem is extremely heavily loaded, and mPIPE cannot perform DMA of - * packet data to memory in a timely fashion. In particular, pause frames - * will <em>not</em> be sent if packets cannot be delivered because - * NotifRings are full, buckets are full, or buffers are not available in - * a buffer stack. */ -#define GXIO_MPIPE_LINK_SEND_PAUSE 0x020000 - -/** Determine whether to suspend output on the receipt of pause frames. - * If the value is nonzero, mPIPE shim will suspend output on the link's - * channel when a pause frame is received. If the value is zero, pause - * frames will be ignored. The default value is zero. */ -#define GXIO_MPIPE_LINK_RECEIVE_PAUSE 0x030000 - -/** Interface MAC address. The value is a 6-byte MAC address, in the least - * significant 48 bits of the value; in other words, an address which would - * be printed as '12:34:56:78:90:AB' in IEEE 802 canonical format would - * be returned as 0x12345678ab. - * - * Depending upon the overall system design, a MAC address may or may not - * be available for each interface. Note that the interface's MAC address - * does not limit the packets received on its channel, although the - * classifier's rules could be configured to do that. Similarly, the MAC - * address is not used when transmitting packets, although applications - * could certainly decide to use the assigned address as a source MAC - * address when doing so. This attribute may only be retrieved with - * gxio_mpipe_link_get_attr(); it may not be modified. - */ -#define GXIO_MPIPE_LINK_MAC 0x040000 - -/** Determine whether to discard egress packets on link down. If this value - * is nonzero, packets sent on this link while the link is down will be - * discarded. If this value is zero, no packets will be sent on this link - * while it is down. The default value is one. */ -#define GXIO_MPIPE_LINK_DISCARD_IF_DOWN 0x050000 - -/** Possible link state. The value is a combination of link state flags, - * ORed together, that indicate link modes which are actually supported by - * the hardware. This attribute may only be retrieved with - * gxio_mpipe_link_get_attr(); it may not be modified. */ -#define GXIO_MPIPE_LINK_POSSIBLE_STATE 0x060000 - -/** Current link state. The value is a combination of link state flags, - * ORed together, that indicate the current state of the hardware. If the - * link is down, the value ANDed with ::GXIO_MPIPE_LINK_SPEED will be zero; - * if the link is up, the value ANDed with ::GXIO_MPIPE_LINK_SPEED will - * result in exactly one of the speed values, indicating the current speed. - * This attribute may only be retrieved with gxio_mpipe_link_get_attr(); it - * may not be modified. */ -#define GXIO_MPIPE_LINK_CURRENT_STATE 0x070000 - -/** Desired link state. The value is a conbination of flags, which specify - * the desired state for the link. With gxio_mpipe_link_set_attr(), this - * will, in the background, attempt to bring up the link using whichever of - * the requested flags are reasonable, or take down the link if the flags - * are zero. The actual link up or down operation may happen after this - * call completes. If the link state changes in the future, the system - * will continue to try to get back to the desired link state; for - * instance, if the link is brought up successfully, and then the network - * cable is disconnected, the link will go down. However, the desired - * state of the link is still up, so if the cable is reconnected, the link - * will be brought up again. - * - * With gxio_mpipe_link_set_attr(), this will indicate the desired state - * for the link, as set with a previous gxio_mpipe_link_set_attr() call, - * or implicitly by a gxio_mpipe_link_open() or link close operation. - * This may not reflect the current state of the link; to get that, use - * ::GXIO_MPIPE_LINK_CURRENT_STATE. - */ -#define GXIO_MPIPE_LINK_DESIRED_STATE 0x080000 - - - -/** Link can run, should run, or is running at 10 Mbps. */ -#define GXIO_MPIPE_LINK_10M 0x0000000000000001UL - -/** Link can run, should run, or is running at 100 Mbps. */ -#define GXIO_MPIPE_LINK_100M 0x0000000000000002UL - -/** Link can run, should run, or is running at 1 Gbps. */ -#define GXIO_MPIPE_LINK_1G 0x0000000000000004UL - -/** Link can run, should run, or is running at 10 Gbps. */ -#define GXIO_MPIPE_LINK_10G 0x0000000000000008UL - -/** Link can run, should run, or is running at 20 Gbps. */ -#define GXIO_MPIPE_LINK_20G 0x0000000000000010UL - -/** Link can run, should run, or is running at 25 Gbps. */ -#define GXIO_MPIPE_LINK_25G 0x0000000000000020UL - -/** Link can run, should run, or is running at 50 Gbps. */ -#define GXIO_MPIPE_LINK_50G 0x0000000000000040UL - -/** Link should run at the highest speed supported by the link and by - * the device connected to the link. Only usable as a value for - * the link's desired state; never returned as a value for the current - * or possible states. */ -#define GXIO_MPIPE_LINK_ANYSPEED 0x0000000000000800UL - -/** All legal link speeds. This value is provided for use in extracting - * the speed-related subset of the link state flags; it is not intended - * to be set directly as a value for one of the GXIO_MPIPE_LINK_xxx_STATE - * attributes. A link is up or is requested to be up if its current or - * desired state, respectively, ANDED with this value, is nonzero. */ -#define GXIO_MPIPE_LINK_SPEED_MASK 0x0000000000000FFFUL - -/** Link can run, should run, or is running in MAC loopback mode. This - * loops transmitted packets back to the receiver, inside the Tile - * Processor. */ -#define GXIO_MPIPE_LINK_LOOP_MAC 0x0000000000001000UL - -/** Link can run, should run, or is running in PHY loopback mode. This - * loops transmitted packets back to the receiver, inside the external - * PHY chip. */ -#define GXIO_MPIPE_LINK_LOOP_PHY 0x0000000000002000UL - -/** Link can run, should run, or is running in external loopback mode. - * This requires that an external loopback plug be installed on the - * Ethernet port. Note that only some links require that this be - * configured via the gxio_mpipe_link routines; other links can do - * external loopack with the plug and no special configuration. */ -#define GXIO_MPIPE_LINK_LOOP_EXT 0x0000000000004000UL - -/** All legal loopback types. */ -#define GXIO_MPIPE_LINK_LOOP_MASK 0x000000000000F000UL - -/** Link can run, should run, or is running in full-duplex mode. - * If neither ::GXIO_MPIPE_LINK_FDX nor ::GXIO_MPIPE_LINK_HDX are - * specified in a set of desired state flags, both are assumed. */ -#define GXIO_MPIPE_LINK_FDX 0x0000000000010000UL - -/** Link can run, should run, or is running in half-duplex mode. - * If neither ::GXIO_MPIPE_LINK_FDX nor ::GXIO_MPIPE_LINK_HDX are - * specified in a set of desired state flags, both are assumed. */ -#define GXIO_MPIPE_LINK_HDX 0x0000000000020000UL - - -/** An individual rule. */ -typedef struct -{ - /** The total size. */ - uint16_t size; - - /** The priority. */ - int16_t priority; - - /** The "headroom" in each buffer. */ - uint8_t headroom; - - /** The "tailroom" in each buffer. */ - uint8_t tailroom; - - /** The "capacity" of the largest buffer. */ - uint16_t capacity; - - /** The mask for converting a flow hash into a bucket. */ - uint16_t bucket_mask; - - /** The offset for converting a flow hash into a bucket. */ - uint16_t bucket_first; - - /** The buffer stack ids. */ - gxio_mpipe_rules_stacks_t stacks; - - /** The actual channels. */ - uint32_t channel_bits; - - /** The number of dmacs. */ - uint16_t num_dmacs; - - /** The number of vlans. */ - uint16_t num_vlans; - - /** The actual dmacs and vlans. */ - uint8_t dmacs_and_vlans[]; - -} gxio_mpipe_rules_rule_t; - - -/** A list of classifier rules. */ -typedef struct -{ - /** The offset to the end of the current rule. */ - uint16_t tail; - - /** The offset to the start of the current rule. */ - uint16_t head; - - /** The actual rules. */ - uint8_t rules[4096 - 4]; - -} gxio_mpipe_rules_list_t; - - - - -/** mPIPE statistics structure. These counters include all relevant - * events occurring on all links within the mPIPE shim. */ -typedef struct -{ - /** Number of ingress packets dropped for any reason. */ - uint64_t ingress_drops; - /** Number of ingress packets dropped because a buffer stack was empty. */ - uint64_t ingress_drops_no_buf; - /** Number of ingress packets dropped or truncated due to lack of space in - * the iPkt buffer. */ - uint64_t ingress_drops_ipkt; - /** Number of ingress packets dropped by the classifier or load balancer */ - uint64_t ingress_drops_cls_lb; - /** Total number of ingress packets. */ - uint64_t ingress_packets; - /** Total number of egress packets. */ - uint64_t egress_packets; - /** Total number of ingress bytes. */ - uint64_t ingress_bytes; - /** Total number of egress bytes. */ - uint64_t egress_bytes; -} -gxio_mpipe_stats_t; - - -#endif /* _SYS_HV_DRV_MPIPE_INTF_H */ diff --git a/arch/tile/include/hv/drv_mshim_intf.h b/arch/tile/include/hv/drv_mshim_intf.h deleted file mode 100644 index c6ef3bdc55cf..000000000000 --- a/arch/tile/include/hv/drv_mshim_intf.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/** - * @file drv_mshim_intf.h - * Interface definitions for the Linux EDAC memory controller driver. - */ - -#ifndef _SYS_HV_INCLUDE_DRV_MSHIM_INTF_H -#define _SYS_HV_INCLUDE_DRV_MSHIM_INTF_H - -/** Number of memory controllers in the public API. */ -#define TILE_MAX_MSHIMS 4 - -/** Memory info under each memory controller. */ -struct mshim_mem_info -{ - uint64_t mem_size; /**< Total memory size in bytes. */ - uint8_t mem_type; /**< Memory type, DDR2 or DDR3. */ - uint8_t mem_ecc; /**< Memory supports ECC. */ -}; - -/** - * DIMM error structure. - * For now, only correctable errors are counted and the mshim doesn't record - * the error PA. HV takes panic upon uncorrectable errors. - */ -struct mshim_mem_error -{ - uint32_t sbe_count; /**< Number of single-bit errors. */ -}; - -/** Read this offset to get the memory info per mshim. */ -#define MSHIM_MEM_INFO_OFF 0x100 - -/** Read this offset to check DIMM error. */ -#define MSHIM_MEM_ERROR_OFF 0x200 - -#endif /* _SYS_HV_INCLUDE_DRV_MSHIM_INTF_H */ diff --git a/arch/tile/include/hv/drv_pcie_rc_intf.h b/arch/tile/include/hv/drv_pcie_rc_intf.h deleted file mode 100644 index 9bd2243bece0..000000000000 --- a/arch/tile/include/hv/drv_pcie_rc_intf.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/** - * @file drv_pcie_rc_intf.h - * Interface definitions for the PCIE Root Complex. - */ - -#ifndef _SYS_HV_DRV_PCIE_RC_INTF_H -#define _SYS_HV_DRV_PCIE_RC_INTF_H - -/** File offset for reading the interrupt base number used for PCIE legacy - interrupts and PLX Gen 1 requirement flag */ -#define PCIE_RC_CONFIG_MASK_OFF 0 - - -/** - * Structure used for obtaining PCIe config information, read from the PCIE - * subsystem /ctl file at initialization - */ -typedef struct pcie_rc_config -{ - int intr; /**< interrupt number used for downcall */ - int plx_gen1; /**< flag for PLX Gen 1 configuration */ -} pcie_rc_config_t; - -#endif /* _SYS_HV_DRV_PCIE_RC_INTF_H */ diff --git a/arch/tile/include/hv/drv_srom_intf.h b/arch/tile/include/hv/drv_srom_intf.h deleted file mode 100644 index 6395faa6d9e6..000000000000 --- a/arch/tile/include/hv/drv_srom_intf.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/** - * @file drv_srom_intf.h - * Interface definitions for the SPI Flash ROM driver. - */ - -#ifndef _SYS_HV_INCLUDE_DRV_SROM_INTF_H -#define _SYS_HV_INCLUDE_DRV_SROM_INTF_H - -/** Read this offset to get the total device size. */ -#define SROM_TOTAL_SIZE_OFF 0xF0000000 - -/** Read this offset to get the device sector size. */ -#define SROM_SECTOR_SIZE_OFF 0xF0000004 - -/** Read this offset to get the device page size. */ -#define SROM_PAGE_SIZE_OFF 0xF0000008 - -/** Write this offset to flush any pending writes. */ -#define SROM_FLUSH_OFF 0xF1000000 - -/** Write this offset, plus the byte offset of the start of a sector, to - * erase a sector. Any write data is ignored, but there must be at least - * one byte of write data. Only applies when the driver is in MTD mode. - */ -#define SROM_ERASE_OFF 0xF2000000 - -#endif /* _SYS_HV_INCLUDE_DRV_SROM_INTF_H */ diff --git a/arch/tile/include/hv/drv_trio_intf.h b/arch/tile/include/hv/drv_trio_intf.h deleted file mode 100644 index 237e04dee66c..000000000000 --- a/arch/tile/include/hv/drv_trio_intf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/** - * Interface definitions for the trio driver. - */ - -#ifndef _SYS_HV_DRV_TRIO_INTF_H -#define _SYS_HV_DRV_TRIO_INTF_H - -#include <arch/trio.h> - -/** The vendor ID for all Tilera processors. */ -#define TILERA_VENDOR_ID 0x1a41 - -/** The device ID for the Gx36 processor. */ -#define TILERA_GX36_DEV_ID 0x0200 - -/** Device ID for our internal bridge when running as RC. */ -#define TILERA_GX36_RC_DEV_ID 0x2000 - -/** Maximum number of TRIO interfaces. */ -#define TILEGX_NUM_TRIO 2 - -/** Gx36 has max 3 PCIe MACs per TRIO interface. */ -#define TILEGX_TRIO_PCIES 3 - -/** Specify port properties for a PCIe MAC. */ -struct pcie_port_property -{ - /** If true, the link can be configured in PCIe root complex mode. */ - uint8_t allow_rc: 1; - - /** If true, the link can be configured in PCIe endpoint mode. */ - uint8_t allow_ep: 1; - - /** If true, the link can be configured in StreamIO mode. */ - uint8_t allow_sio: 1; - - /** If true, the link is allowed to support 1-lane operation. Software - * will not consider it an error if the link comes up as a x1 link. */ - uint8_t allow_x1: 1; - - /** If true, the link is allowed to support 2-lane operation. Software - * will not consider it an error if the link comes up as a x2 link. */ - uint8_t allow_x2: 1; - - /** If true, the link is allowed to support 4-lane operation. Software - * will not consider it an error if the link comes up as a x4 link. */ - uint8_t allow_x4: 1; - - /** If true, the link is allowed to support 8-lane operation. Software - * will not consider it an error if the link comes up as a x8 link. */ - uint8_t allow_x8: 1; - - /** If true, this link is connected to a device which may or may not - * be present. */ - uint8_t removable: 1; - -}; - -/** Configurations can be issued to configure a char stream interrupt. */ -typedef enum pcie_stream_intr_config_sel_e -{ - /** Interrupt configuration for memory map regions. */ - MEM_MAP_SEL, - - /** Interrupt configuration for push DMAs. */ - PUSH_DMA_SEL, - - /** Interrupt configuration for pull DMAs. */ - PULL_DMA_SEL, -} -pcie_stream_intr_config_sel_t; - - -/** The mmap file offset (PA) of the TRIO config region. */ -#define HV_TRIO_CONFIG_OFFSET \ - ((unsigned long long)TRIO_MMIO_ADDRESS_SPACE__REGION_VAL_CFG << \ - TRIO_MMIO_ADDRESS_SPACE__REGION_SHIFT) - -/** The maximum size of the TRIO config region. */ -#define HV_TRIO_CONFIG_SIZE \ - (1ULL << TRIO_CFG_REGION_ADDR__REGION_SHIFT) - -/** Size of the config region mapped into client. We can't use - * TRIO_MMIO_ADDRESS_SPACE__OFFSET_WIDTH because it - * will require the kernel to allocate 4GB VA space - * from the VMALLOC region which has a total range - * of 4GB. - */ -#define HV_TRIO_CONFIG_IOREMAP_SIZE \ - ((uint64_t) 1 << TRIO_CFG_REGION_ADDR__PROT_SHIFT) - -/** The mmap file offset (PA) of a scatter queue region. */ -#define HV_TRIO_SQ_OFFSET(queue) \ - (((unsigned long long)TRIO_MMIO_ADDRESS_SPACE__REGION_VAL_MAP_SQ << \ - TRIO_MMIO_ADDRESS_SPACE__REGION_SHIFT) | \ - ((queue) << TRIO_MAP_SQ_REGION_ADDR__SQ_SEL_SHIFT)) - -/** The maximum size of a scatter queue region. */ -#define HV_TRIO_SQ_SIZE \ - (1ULL << TRIO_MAP_SQ_REGION_ADDR__SQ_SEL_SHIFT) - - -/** The "hardware MMIO region" of the first PIO region. */ -#define HV_TRIO_FIRST_PIO_REGION 8 - -/** The mmap file offset (PA) of a PIO region. */ -#define HV_TRIO_PIO_OFFSET(region) \ - (((unsigned long long)(region) + HV_TRIO_FIRST_PIO_REGION) \ - << TRIO_PIO_REGIONS_ADDR__REGION_SHIFT) - -/** The maximum size of a PIO region. */ -#define HV_TRIO_PIO_SIZE (1ULL << TRIO_PIO_REGIONS_ADDR__ADDR_WIDTH) - - -/** The mmap file offset (PA) of a push DMA region. */ -#define HV_TRIO_PUSH_DMA_OFFSET(ring) \ - (((unsigned long long)TRIO_MMIO_ADDRESS_SPACE__REGION_VAL_PUSH_DMA << \ - TRIO_MMIO_ADDRESS_SPACE__REGION_SHIFT) | \ - ((ring) << TRIO_PUSH_DMA_REGION_ADDR__RING_SEL_SHIFT)) - -/** The mmap file offset (PA) of a pull DMA region. */ -#define HV_TRIO_PULL_DMA_OFFSET(ring) \ - (((unsigned long long)TRIO_MMIO_ADDRESS_SPACE__REGION_VAL_PULL_DMA << \ - TRIO_MMIO_ADDRESS_SPACE__REGION_SHIFT) | \ - ((ring) << TRIO_PULL_DMA_REGION_ADDR__RING_SEL_SHIFT)) - -/** The maximum size of a DMA region. */ -#define HV_TRIO_DMA_REGION_SIZE \ - (1ULL << TRIO_PUSH_DMA_REGION_ADDR__RING_SEL_SHIFT) - - -/** The mmap file offset (PA) of a Mem-Map interrupt region. */ -#define HV_TRIO_MEM_MAP_INTR_OFFSET(map) \ - (((unsigned long long)TRIO_MMIO_ADDRESS_SPACE__REGION_VAL_MAP_MEM << \ - TRIO_MMIO_ADDRESS_SPACE__REGION_SHIFT) | \ - ((map) << TRIO_MAP_MEM_REGION_ADDR__MAP_SEL_SHIFT)) - -/** The maximum size of a Mem-Map interrupt region. */ -#define HV_TRIO_MEM_MAP_INTR_SIZE \ - (1ULL << TRIO_MAP_MEM_REGION_ADDR__MAP_SEL_SHIFT) - - -/** A flag bit indicating a fixed resource allocation. */ -#define HV_TRIO_ALLOC_FIXED 0x01 - -/** TRIO requires that all mappings have 4kB aligned start addresses. */ -#define HV_TRIO_PAGE_SHIFT 12 - -/** TRIO requires that all mappings have 4kB aligned start addresses. */ -#define HV_TRIO_PAGE_SIZE (1ull << HV_TRIO_PAGE_SHIFT) - - -/* Specify all PCIe port properties for a TRIO. */ -struct pcie_trio_ports_property -{ - struct pcie_port_property ports[TILEGX_TRIO_PCIES]; - - /** Set if this TRIO belongs to a Gx72 device. */ - uint8_t is_gx72; -}; - -/* Flags indicating traffic class. */ -#define HV_TRIO_FLAG_TC_SHIFT 4 -#define HV_TRIO_FLAG_TC_RMASK 0xf -#define HV_TRIO_FLAG_TC(N) \ - ((((N) & HV_TRIO_FLAG_TC_RMASK) + 1) << HV_TRIO_FLAG_TC_SHIFT) - -/* Flags indicating virtual functions. */ -#define HV_TRIO_FLAG_VFUNC_SHIFT 8 -#define HV_TRIO_FLAG_VFUNC_RMASK 0xff -#define HV_TRIO_FLAG_VFUNC(N) \ - ((((N) & HV_TRIO_FLAG_VFUNC_RMASK) + 1) << HV_TRIO_FLAG_VFUNC_SHIFT) - - -/* Flag indicating an ordered PIO region. */ -#define HV_TRIO_PIO_FLAG_ORDERED (1 << 16) - -/* Flags indicating special types of PIO regions. */ -#define HV_TRIO_PIO_FLAG_SPACE_SHIFT 17 -#define HV_TRIO_PIO_FLAG_SPACE_MASK (0x3 << HV_TRIO_PIO_FLAG_SPACE_SHIFT) -#define HV_TRIO_PIO_FLAG_CONFIG_SPACE (0x1 << HV_TRIO_PIO_FLAG_SPACE_SHIFT) -#define HV_TRIO_PIO_FLAG_IO_SPACE (0x2 << HV_TRIO_PIO_FLAG_SPACE_SHIFT) - - -#endif /* _SYS_HV_DRV_TRIO_INTF_H */ diff --git a/arch/tile/include/hv/drv_uart_intf.h b/arch/tile/include/hv/drv_uart_intf.h deleted file mode 100644 index f5379e2404fd..000000000000 --- a/arch/tile/include/hv/drv_uart_intf.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright 2013 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/** - * Interface definitions for the UART driver. - */ - -#ifndef _SYS_HV_DRV_UART_INTF_H -#define _SYS_HV_DRV_UART_INTF_H - -#include <arch/uart.h> - -/** Number of UART ports supported. */ -#define TILEGX_UART_NR 2 - -/** The mmap file offset (PA) of the UART MMIO region. */ -#define HV_UART_MMIO_OFFSET 0 - -/** The maximum size of the UARTs MMIO region (64K Bytes). */ -#define HV_UART_MMIO_SIZE (1UL << 16) - -#endif /* _SYS_HV_DRV_UART_INTF_H */ diff --git a/arch/tile/include/hv/drv_usb_host_intf.h b/arch/tile/include/hv/drv_usb_host_intf.h deleted file mode 100644 index 24ce774a3f1d..000000000000 --- a/arch/tile/include/hv/drv_usb_host_intf.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/** - * Interface definitions for the USB host driver. - */ - -#ifndef _SYS_HV_DRV_USB_HOST_INTF_H -#define _SYS_HV_DRV_USB_HOST_INTF_H - -#include <arch/usb_host.h> - - -/** Offset for the EHCI register MMIO region. */ -#define HV_USB_HOST_MMIO_OFFSET_EHCI ((uint64_t) USB_HOST_HCCAPBASE_REG) - -/** Offset for the OHCI register MMIO region. */ -#define HV_USB_HOST_MMIO_OFFSET_OHCI ((uint64_t) USB_HOST_OHCD_HC_REVISION_REG) - -/** Size of the register MMIO region. This turns out to be the same for - * both EHCI and OHCI. */ -#define HV_USB_HOST_MMIO_SIZE ((uint64_t) 0x1000) - -/** The number of service domains supported by the USB host shim. */ -#define HV_USB_HOST_NUM_SVC_DOM 1 - - -#endif /* _SYS_HV_DRV_USB_HOST_INTF_H */ diff --git a/arch/tile/include/hv/drv_xgbe_impl.h b/arch/tile/include/hv/drv_xgbe_impl.h deleted file mode 100644 index 3a73b2b44913..000000000000 --- a/arch/tile/include/hv/drv_xgbe_impl.h +++ /dev/null @@ -1,300 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/** - * @file drivers/xgbe/impl.h - * Implementation details for the NetIO library. - */ - -#ifndef __DRV_XGBE_IMPL_H__ -#define __DRV_XGBE_IMPL_H__ - -#include <hv/netio_errors.h> -#include <hv/netio_intf.h> -#include <hv/drv_xgbe_intf.h> - - -/** How many groups we have (log2). */ -#define LOG2_NUM_GROUPS (12) -/** How many groups we have. */ -#define NUM_GROUPS (1 << LOG2_NUM_GROUPS) - -/** Number of output requests we'll buffer per tile. */ -#define EPP_REQS_PER_TILE (32) - -/** Words used in an eDMA command without checksum acceleration. */ -#define EDMA_WDS_NO_CSUM 8 -/** Words used in an eDMA command with checksum acceleration. */ -#define EDMA_WDS_CSUM 10 -/** Total available words in the eDMA command FIFO. */ -#define EDMA_WDS_TOTAL 128 - - -/* - * FIXME: These definitions are internal and should have underscores! - * NOTE: The actual numeric values here are intentional and allow us to - * optimize the concept "if small ... else if large ... else ...", by - * checking for the low bit being set, and then for non-zero. - * These are used as array indices, so they must have the values (0, 1, 2) - * in some order. - */ -#define SIZE_SMALL (1) /**< Small packet queue. */ -#define SIZE_LARGE (2) /**< Large packet queue. */ -#define SIZE_JUMBO (0) /**< Jumbo packet queue. */ - -/** The number of "SIZE_xxx" values. */ -#define NETIO_NUM_SIZES 3 - - -/* - * Default numbers of packets for IPP drivers. These values are chosen - * such that CIPP1 will not overflow its L2 cache. - */ - -/** The default number of small packets. */ -#define NETIO_DEFAULT_SMALL_PACKETS 2750 -/** The default number of large packets. */ -#define NETIO_DEFAULT_LARGE_PACKETS 2500 -/** The default number of jumbo packets. */ -#define NETIO_DEFAULT_JUMBO_PACKETS 250 - - -/** Log2 of the size of a memory arena. */ -#define NETIO_ARENA_SHIFT 24 /* 16 MB */ -/** Size of a memory arena. */ -#define NETIO_ARENA_SIZE (1 << NETIO_ARENA_SHIFT) - - -/** A queue of packets. - * - * This structure partially defines a queue of packets waiting to be - * processed. The queue as a whole is written to by an interrupt handler and - * read by non-interrupt code; this data structure is what's touched by the - * interrupt handler. The other part of the queue state, the read offset, is - * kept in user space, not in hypervisor space, so it is in a separate data - * structure. - * - * The read offset (__packet_receive_read in the user part of the queue - * structure) points to the next packet to be read. When the read offset is - * equal to the write offset, the queue is empty; therefore the queue must - * contain one more slot than the required maximum queue size. - * - * Here's an example of all 3 state variables and what they mean. All - * pointers move left to right. - * - * @code - * I I V V V V I I I I - * 0 1 2 3 4 5 6 7 8 9 10 - * ^ ^ ^ ^ - * | | | - * | | __last_packet_plus_one - * | __buffer_write - * __packet_receive_read - * @endcode - * - * This queue has 10 slots, and thus can hold 9 packets (_last_packet_plus_one - * = 10). The read pointer is at 2, and the write pointer is at 6; thus, - * there are valid, unread packets in slots 2, 3, 4, and 5. The remaining - * slots are invalid (do not contain a packet). - */ -typedef struct { - /** Byte offset of the next notify packet to be written: zero for the first - * packet on the queue, sizeof (netio_pkt_t) for the second packet on the - * queue, etc. */ - volatile uint32_t __packet_write; - - /** Offset of the packet after the last valid packet (i.e., when any - * pointer is incremented to this value, it wraps back to zero). */ - uint32_t __last_packet_plus_one; -} -__netio_packet_queue_t; - - -/** A queue of buffers. - * - * This structure partially defines a queue of empty buffers which have been - * obtained via requests to the IPP. (The elements of the queue are packet - * handles, which are transformed into a full netio_pkt_t when the buffer is - * retrieved.) The queue as a whole is written to by an interrupt handler and - * read by non-interrupt code; this data structure is what's touched by the - * interrupt handler. The other parts of the queue state, the read offset and - * requested write offset, are kept in user space, not in hypervisor space, so - * they are in a separate data structure. - * - * The read offset (__buffer_read in the user part of the queue structure) - * points to the next buffer to be read. When the read offset is equal to the - * write offset, the queue is empty; therefore the queue must contain one more - * slot than the required maximum queue size. - * - * The requested write offset (__buffer_requested_write in the user part of - * the queue structure) points to the slot which will hold the next buffer we - * request from the IPP, once we get around to sending such a request. When - * the requested write offset is equal to the write offset, no requests for - * new buffers are outstanding; when the requested write offset is one greater - * than the read offset, no more requests may be sent. - * - * Note that, unlike the packet_queue, the buffer_queue places incoming - * buffers at decreasing addresses. This makes the check for "is it time to - * wrap the buffer pointer" cheaper in the assembly code which receives new - * buffers, and means that the value which defines the queue size, - * __last_buffer, is different than in the packet queue. Also, the offset - * used in the packet_queue is already scaled by the size of a packet; here we - * use unscaled slot indices for the offsets. (These differences are - * historical, and in the future it's possible that the packet_queue will look - * more like this queue.) - * - * @code - * Here's an example of all 4 state variables and what they mean. Remember: - * all pointers move right to left. - * - * V V V I I R R V V V - * 0 1 2 3 4 5 6 7 8 9 - * ^ ^ ^ ^ - * | | | | - * | | | __last_buffer - * | | __buffer_write - * | __buffer_requested_write - * __buffer_read - * @endcode - * - * This queue has 10 slots, and thus can hold 9 buffers (_last_buffer = 9). - * The read pointer is at 2, and the write pointer is at 6; thus, there are - * valid, unread buffers in slots 2, 1, 0, 9, 8, and 7. The requested write - * pointer is at 4; thus, requests have been made to the IPP for buffers which - * will be placed in slots 6 and 5 when they arrive. Finally, the remaining - * slots are invalid (do not contain a buffer). - */ -typedef struct -{ - /** Ordinal number of the next buffer to be written: 0 for the first slot in - * the queue, 1 for the second slot in the queue, etc. */ - volatile uint32_t __buffer_write; - - /** Ordinal number of the last buffer (i.e., when any pointer is decremented - * below zero, it is reloaded with this value). */ - uint32_t __last_buffer; -} -__netio_buffer_queue_t; - - -/** - * An object for providing Ethernet packets to a process. - */ -typedef struct __netio_queue_impl_t -{ - /** The queue of packets waiting to be received. */ - __netio_packet_queue_t __packet_receive_queue; - /** The intr bit mask that IDs this device. */ - unsigned int __intr_id; - /** Offset to queues of empty buffers, one per size. */ - uint32_t __buffer_queue[NETIO_NUM_SIZES]; - /** The address of the first EPP tile, or -1 if no EPP. */ - /* ISSUE: Actually this is always "0" or "~0". */ - uint32_t __epp_location; - /** The queue ID that this queue represents. */ - unsigned int __queue_id; - /** Number of acknowledgements received. */ - volatile uint32_t __acks_received; - /** Last completion number received for packet_sendv. */ - volatile uint32_t __last_completion_rcv; - /** Number of packets allowed to be outstanding. */ - uint32_t __max_outstanding; - /** First VA available for packets. */ - void* __va_0; - /** First VA in second range available for packets. */ - void* __va_1; - /** Padding to align the "__packets" field to the size of a netio_pkt_t. */ - uint32_t __padding[3]; - /** The packets themselves. */ - netio_pkt_t __packets[0]; -} -netio_queue_impl_t; - - -/** - * An object for managing the user end of a NetIO queue. - */ -typedef struct __netio_queue_user_impl_t -{ - /** The next incoming packet to be read. */ - uint32_t __packet_receive_read; - /** The next empty buffers to be read, one index per size. */ - uint8_t __buffer_read[NETIO_NUM_SIZES]; - /** Where the empty buffer we next request from the IPP will go, one index - * per size. */ - uint8_t __buffer_requested_write[NETIO_NUM_SIZES]; - /** PCIe interface flag. */ - uint8_t __pcie; - /** Number of packets left to be received before we send a credit update. */ - uint32_t __receive_credit_remaining; - /** Value placed in __receive_credit_remaining when it reaches zero. */ - uint32_t __receive_credit_interval; - /** First fast I/O routine index. */ - uint32_t __fastio_index; - /** Number of acknowledgements expected. */ - uint32_t __acks_outstanding; - /** Last completion number requested. */ - uint32_t __last_completion_req; - /** File descriptor for driver. */ - int __fd; -} -netio_queue_user_impl_t; - - -#define NETIO_GROUP_CHUNK_SIZE 64 /**< Max # groups in one IPP request */ -#define NETIO_BUCKET_CHUNK_SIZE 64 /**< Max # buckets in one IPP request */ - - -/** Internal structure used to convey packet send information to the - * hypervisor. FIXME: Actually, it's not used for that anymore, but - * netio_packet_send() still uses it internally. - */ -typedef struct -{ - uint16_t flags; /**< Packet flags (__NETIO_SEND_FLG_xxx) */ - uint16_t transfer_size; /**< Size of packet */ - uint32_t va; /**< VA of start of packet */ - __netio_pkt_handle_t handle; /**< Packet handle */ - uint32_t csum0; /**< First checksum word */ - uint32_t csum1; /**< Second checksum word */ -} -__netio_send_cmd_t; - - -/** Flags used in two contexts: - * - As the "flags" member in the __netio_send_cmd_t, above; used only - * for netio_pkt_send_{prepare,commit}. - * - As part of the flags passed to the various send packet fast I/O calls. - */ - -/** Need acknowledgement on this packet. Note that some code in the - * normal send_pkt fast I/O handler assumes that this is equal to 1. */ -#define __NETIO_SEND_FLG_ACK 0x1 - -/** Do checksum on this packet. (Only used with the __netio_send_cmd_t; - * normal packet sends use a special fast I/O index to denote checksumming, - * and multi-segment sends test the checksum descriptor.) */ -#define __NETIO_SEND_FLG_CSUM 0x2 - -/** Get a completion on this packet. Only used with multi-segment sends. */ -#define __NETIO_SEND_FLG_COMPLETION 0x4 - -/** Position of the number-of-extra-segments value in the flags word. - Only used with multi-segment sends. */ -#define __NETIO_SEND_FLG_XSEG_SHIFT 3 - -/** Width of the number-of-extra-segments value in the flags word. */ -#define __NETIO_SEND_FLG_XSEG_WIDTH 2 - -#endif /* __DRV_XGBE_IMPL_H__ */ diff --git a/arch/tile/include/hv/drv_xgbe_intf.h b/arch/tile/include/hv/drv_xgbe_intf.h deleted file mode 100644 index 2a20b266d944..000000000000 --- a/arch/tile/include/hv/drv_xgbe_intf.h +++ /dev/null @@ -1,615 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/** - * @file drv_xgbe_intf.h - * Interface to the hypervisor XGBE driver. - */ - -#ifndef __DRV_XGBE_INTF_H__ -#define __DRV_XGBE_INTF_H__ - -/** - * An object for forwarding VAs and PAs to the hypervisor. - * @ingroup types - * - * This allows the supervisor to specify a number of areas of memory to - * store packet buffers. - */ -typedef struct -{ - /** The physical address of the memory. */ - HV_PhysAddr pa; - /** Page table entry for the memory. This is only used to derive the - * memory's caching mode; the PA bits are ignored. */ - HV_PTE pte; - /** The virtual address of the memory. */ - HV_VirtAddr va; - /** Size (in bytes) of the memory area. */ - int size; - -} -netio_ipp_address_t; - -/** The various pread/pwrite offsets into the hypervisor-level driver. - * @ingroup types - */ -typedef enum -{ - /** Inform the Linux driver of the address of the NetIO arena memory. - * This offset is actually only used to convey information from netio - * to the Linux driver; it never makes it from there to the hypervisor. - * Write-only; takes a uint32_t specifying the VA address. */ - NETIO_FIXED_ADDR = 0x5000000000000000ULL, - - /** Inform the Linux driver of the size of the NetIO arena memory. - * This offset is actually only used to convey information from netio - * to the Linux driver; it never makes it from there to the hypervisor. - * Write-only; takes a uint32_t specifying the VA size. */ - NETIO_FIXED_SIZE = 0x5100000000000000ULL, - - /** Register current tile with IPP. Write then read: write, takes a - * netio_input_config_t, read returns a pointer to a netio_queue_impl_t. */ - NETIO_IPP_INPUT_REGISTER_OFF = 0x6000000000000000ULL, - - /** Unregister current tile from IPP. Write-only, takes a dummy argument. */ - NETIO_IPP_INPUT_UNREGISTER_OFF = 0x6100000000000000ULL, - - /** Start packets flowing. Write-only, takes a dummy argument. */ - NETIO_IPP_INPUT_INIT_OFF = 0x6200000000000000ULL, - - /** Stop packets flowing. Write-only, takes a dummy argument. */ - NETIO_IPP_INPUT_UNINIT_OFF = 0x6300000000000000ULL, - - /** Configure group (typically we group on VLAN). Write-only: takes an - * array of netio_group_t's, low 24 bits of the offset is the base group - * number times the size of a netio_group_t. */ - NETIO_IPP_INPUT_GROUP_CFG_OFF = 0x6400000000000000ULL, - - /** Configure bucket. Write-only: takes an array of netio_bucket_t's, low - * 24 bits of the offset is the base bucket number times the size of a - * netio_bucket_t. */ - NETIO_IPP_INPUT_BUCKET_CFG_OFF = 0x6500000000000000ULL, - - /** Get/set a parameter. Read or write: read or write data is the parameter - * value, low 32 bits of the offset is a __netio_getset_offset_t. */ - NETIO_IPP_PARAM_OFF = 0x6600000000000000ULL, - - /** Get fast I/O index. Read-only; returns a 4-byte base index value. */ - NETIO_IPP_GET_FASTIO_OFF = 0x6700000000000000ULL, - - /** Configure hijack IP address. Packets with this IPv4 dest address - * go to bucket NETIO_NUM_BUCKETS - 1. Write-only: takes an IP address - * in some standard form. FIXME: Define the form! */ - NETIO_IPP_INPUT_HIJACK_CFG_OFF = 0x6800000000000000ULL, - - /** - * Offsets beyond this point are reserved for the supervisor (although that - * enforcement must be done by the supervisor driver itself). - */ - NETIO_IPP_USER_MAX_OFF = 0x6FFFFFFFFFFFFFFFULL, - - /** Register I/O memory. Write-only, takes a netio_ipp_address_t. */ - NETIO_IPP_IOMEM_REGISTER_OFF = 0x7000000000000000ULL, - - /** Unregister I/O memory. Write-only, takes a netio_ipp_address_t. */ - NETIO_IPP_IOMEM_UNREGISTER_OFF = 0x7100000000000000ULL, - - /* Offsets greater than 0x7FFFFFFF can't be used directly from Linux - * userspace code due to limitations in the pread/pwrite syscalls. */ - - /** Drain LIPP buffers. */ - NETIO_IPP_DRAIN_OFF = 0xFA00000000000000ULL, - - /** Supply a netio_ipp_address_t to be used as shared memory for the - * LEPP command queue. */ - NETIO_EPP_SHM_OFF = 0xFB00000000000000ULL, - - /* 0xFC... is currently unused. */ - - /** Stop IPP/EPP tiles. Write-only, takes a dummy argument. */ - NETIO_IPP_STOP_SHIM_OFF = 0xFD00000000000000ULL, - - /** Start IPP/EPP tiles. Write-only, takes a dummy argument. */ - NETIO_IPP_START_SHIM_OFF = 0xFE00000000000000ULL, - - /** Supply packet arena. Write-only, takes an array of - * netio_ipp_address_t values. */ - NETIO_IPP_ADDRESS_OFF = 0xFF00000000000000ULL, -} netio_hv_offset_t; - -/** Extract the base offset from an offset */ -#define NETIO_BASE_OFFSET(off) ((off) & 0xFF00000000000000ULL) -/** Extract the local offset from an offset */ -#define NETIO_LOCAL_OFFSET(off) ((off) & 0x00FFFFFFFFFFFFFFULL) - - -/** - * Get/set offset. - */ -typedef union -{ - struct - { - uint64_t addr:48; /**< Class-specific address */ - unsigned int class:8; /**< Class (e.g., NETIO_PARAM) */ - unsigned int opcode:8; /**< High 8 bits of NETIO_IPP_PARAM_OFF */ - } - bits; /**< Bitfields */ - uint64_t word; /**< Aggregated value to use as the offset */ -} -__netio_getset_offset_t; - -/** - * Fast I/O index offsets (must be contiguous). - */ -typedef enum -{ - NETIO_FASTIO_ALLOCATE = 0, /**< Get empty packet buffer */ - NETIO_FASTIO_FREE_BUFFER = 1, /**< Give buffer back to IPP */ - NETIO_FASTIO_RETURN_CREDITS = 2, /**< Give credits to IPP */ - NETIO_FASTIO_SEND_PKT_NOCK = 3, /**< Send a packet, no checksum */ - NETIO_FASTIO_SEND_PKT_CK = 4, /**< Send a packet, with checksum */ - NETIO_FASTIO_SEND_PKT_VEC = 5, /**< Send a vector of packets */ - NETIO_FASTIO_SENDV_PKT = 6, /**< Sendv one packet */ - NETIO_FASTIO_NUM_INDEX = 7, /**< Total number of fast I/O indices */ -} netio_fastio_index_t; - -/** 3-word return type for Fast I/O call. */ -typedef struct -{ - int err; /**< Error code. */ - uint32_t val0; /**< Value. Meaning depends upon the specific call. */ - uint32_t val1; /**< Value. Meaning depends upon the specific call. */ -} netio_fastio_rv3_t; - -/** 0-argument fast I/O call */ -int __netio_fastio0(uint32_t fastio_index); -/** 1-argument fast I/O call */ -int __netio_fastio1(uint32_t fastio_index, uint32_t arg0); -/** 3-argument fast I/O call, 2-word return value */ -netio_fastio_rv3_t __netio_fastio3_rv3(uint32_t fastio_index, uint32_t arg0, - uint32_t arg1, uint32_t arg2); -/** 4-argument fast I/O call */ -int __netio_fastio4(uint32_t fastio_index, uint32_t arg0, uint32_t arg1, - uint32_t arg2, uint32_t arg3); -/** 6-argument fast I/O call */ -int __netio_fastio6(uint32_t fastio_index, uint32_t arg0, uint32_t arg1, - uint32_t arg2, uint32_t arg3, uint32_t arg4, uint32_t arg5); -/** 9-argument fast I/O call */ -int __netio_fastio9(uint32_t fastio_index, uint32_t arg0, uint32_t arg1, - uint32_t arg2, uint32_t arg3, uint32_t arg4, uint32_t arg5, - uint32_t arg6, uint32_t arg7, uint32_t arg8); - -/** Allocate an empty packet. - * @param fastio_index Fast I/O index. - * @param size Size of the packet to allocate. - */ -#define __netio_fastio_allocate(fastio_index, size) \ - __netio_fastio1((fastio_index) + NETIO_FASTIO_ALLOCATE, size) - -/** Free a buffer. - * @param fastio_index Fast I/O index. - * @param handle Handle for the packet to free. - */ -#define __netio_fastio_free_buffer(fastio_index, handle) \ - __netio_fastio1((fastio_index) + NETIO_FASTIO_FREE_BUFFER, handle) - -/** Increment our receive credits. - * @param fastio_index Fast I/O index. - * @param credits Number of credits to add. - */ -#define __netio_fastio_return_credits(fastio_index, credits) \ - __netio_fastio1((fastio_index) + NETIO_FASTIO_RETURN_CREDITS, credits) - -/** Send packet, no checksum. - * @param fastio_index Fast I/O index. - * @param ackflag Nonzero if we want an ack. - * @param size Size of the packet. - * @param va Virtual address of start of packet. - * @param handle Packet handle. - */ -#define __netio_fastio_send_pkt_nock(fastio_index, ackflag, size, va, handle) \ - __netio_fastio4((fastio_index) + NETIO_FASTIO_SEND_PKT_NOCK, ackflag, \ - size, va, handle) - -/** Send packet, calculate checksum. - * @param fastio_index Fast I/O index. - * @param ackflag Nonzero if we want an ack. - * @param size Size of the packet. - * @param va Virtual address of start of packet. - * @param handle Packet handle. - * @param csum0 Shim checksum header. - * @param csum1 Checksum seed. - */ -#define __netio_fastio_send_pkt_ck(fastio_index, ackflag, size, va, handle, \ - csum0, csum1) \ - __netio_fastio6((fastio_index) + NETIO_FASTIO_SEND_PKT_CK, ackflag, \ - size, va, handle, csum0, csum1) - - -/** Format for the "csum0" argument to the __netio_fastio_send routines - * and LEPP. Note that this is currently exactly identical to the - * ShimProtocolOffloadHeader. - */ -typedef union -{ - struct - { - unsigned int start_byte:7; /**< The first byte to be checksummed */ - unsigned int count:14; /**< Number of bytes to be checksummed. */ - unsigned int destination_byte:7; /**< The byte to write the checksum to. */ - unsigned int reserved:4; /**< Reserved. */ - } bits; /**< Decomposed method of access. */ - unsigned int word; /**< To send out the IDN. */ -} __netio_checksum_header_t; - - -/** Sendv packet with 1 or 2 segments. - * @param fastio_index Fast I/O index. - * @param flags Ack/csum/notify flags in low 3 bits; number of segments minus - * 1 in next 2 bits; expected checksum in high 16 bits. - * @param confno Confirmation number to request, if notify flag set. - * @param csum0 Checksum descriptor; if zero, no checksum. - * @param va_F Virtual address of first segment. - * @param va_L Virtual address of last segment, if 2 segments. - * @param len_F_L Length of first segment in low 16 bits; length of last - * segment, if 2 segments, in high 16 bits. - */ -#define __netio_fastio_sendv_pkt_1_2(fastio_index, flags, confno, csum0, \ - va_F, va_L, len_F_L) \ - __netio_fastio6((fastio_index) + NETIO_FASTIO_SENDV_PKT, flags, confno, \ - csum0, va_F, va_L, len_F_L) - -/** Send packet on PCIe interface. - * @param fastio_index Fast I/O index. - * @param flags Ack/csum/notify flags in low 3 bits. - * @param confno Confirmation number to request, if notify flag set. - * @param csum0 Checksum descriptor; Hard wired 0, not needed for PCIe. - * @param va_F Virtual address of the packet buffer. - * @param va_L Virtual address of last segment, if 2 segments. Hard wired 0. - * @param len_F_L Length of the packet buffer in low 16 bits. - */ -#define __netio_fastio_send_pcie_pkt(fastio_index, flags, confno, csum0, \ - va_F, va_L, len_F_L) \ - __netio_fastio6((fastio_index) + PCIE_FASTIO_SENDV_PKT, flags, confno, \ - csum0, va_F, va_L, len_F_L) - -/** Sendv packet with 3 or 4 segments. - * @param fastio_index Fast I/O index. - * @param flags Ack/csum/notify flags in low 3 bits; number of segments minus - * 1 in next 2 bits; expected checksum in high 16 bits. - * @param confno Confirmation number to request, if notify flag set. - * @param csum0 Checksum descriptor; if zero, no checksum. - * @param va_F Virtual address of first segment. - * @param va_L Virtual address of last segment (third segment if 3 segments, - * fourth segment if 4 segments). - * @param len_F_L Length of first segment in low 16 bits; length of last - * segment in high 16 bits. - * @param va_M0 Virtual address of "middle 0" segment; this segment is sent - * second when there are three segments, and third if there are four. - * @param va_M1 Virtual address of "middle 1" segment; this segment is sent - * second when there are four segments. - * @param len_M0_M1 Length of middle 0 segment in low 16 bits; length of middle - * 1 segment, if 4 segments, in high 16 bits. - */ -#define __netio_fastio_sendv_pkt_3_4(fastio_index, flags, confno, csum0, va_F, \ - va_L, len_F_L, va_M0, va_M1, len_M0_M1) \ - __netio_fastio9((fastio_index) + NETIO_FASTIO_SENDV_PKT, flags, confno, \ - csum0, va_F, va_L, len_F_L, va_M0, va_M1, len_M0_M1) - -/** Send vector of packets. - * @param fastio_index Fast I/O index. - * @param seqno Number of packets transmitted so far on this interface; - * used to decide which packets should be acknowledged. - * @param nentries Number of entries in vector. - * @param va Virtual address of start of vector entry array. - * @return 3-word netio_fastio_rv3_t structure. The structure's err member - * is an error code, or zero if no error. The val0 member is the - * updated value of seqno; it has been incremented by 1 for each - * packet sent. That increment may be less than nentries if an - * error occurred, or if some of the entries in the vector contain - * handles equal to NETIO_PKT_HANDLE_NONE. The val1 member is the - * updated value of nentries; it has been decremented by 1 for each - * vector entry processed. Again, that decrement may be less than - * nentries (leaving the returned value positive) if an error - * occurred. - */ -#define __netio_fastio_send_pkt_vec(fastio_index, seqno, nentries, va) \ - __netio_fastio3_rv3((fastio_index) + NETIO_FASTIO_SEND_PKT_VEC, seqno, \ - nentries, va) - - -/** An egress DMA command for LEPP. */ -typedef struct -{ - /** Is this a TSO transfer? - * - * NOTE: This field is always 0, to distinguish it from - * lepp_tso_cmd_t. It must come first! - */ - uint8_t tso : 1; - - /** Unused padding bits. */ - uint8_t _unused : 3; - - /** Should this packet be sent directly from caches instead of DRAM, - * using hash-for-home to locate the packet data? - */ - uint8_t hash_for_home : 1; - - /** Should we compute a checksum? */ - uint8_t compute_checksum : 1; - - /** Is this the final buffer for this packet? - * - * A single packet can be split over several input buffers (a "gather" - * operation). This flag indicates that this is the last buffer - * in a packet. - */ - uint8_t end_of_packet : 1; - - /** Should LEPP advance 'comp_busy' when this DMA is fully finished? */ - uint8_t send_completion : 1; - - /** High bits of Client Physical Address of the start of the buffer - * to be egressed. - * - * NOTE: Only 6 bits are actually needed here, as CPAs are - * currently 38 bits. So two bits could be scavenged from this. - */ - uint8_t cpa_hi; - - /** The number of bytes to be egressed. */ - uint16_t length; - - /** Low 32 bits of Client Physical Address of the start of the buffer - * to be egressed. - */ - uint32_t cpa_lo; - - /** Checksum information (only used if 'compute_checksum'). */ - __netio_checksum_header_t checksum_data; - -} lepp_cmd_t; - - -/** A chunk of physical memory for a TSO egress. */ -typedef struct -{ - /** The low bits of the CPA. */ - uint32_t cpa_lo; - /** The high bits of the CPA. */ - uint16_t cpa_hi : 15; - /** Should this packet be sent directly from caches instead of DRAM, - * using hash-for-home to locate the packet data? - */ - uint16_t hash_for_home : 1; - /** The length in bytes. */ - uint16_t length; -} lepp_frag_t; - - -/** An LEPP command that handles TSO. */ -typedef struct -{ - /** Is this a TSO transfer? - * - * NOTE: This field is always 1, to distinguish it from - * lepp_cmd_t. It must come first! - */ - uint8_t tso : 1; - - /** Unused padding bits. */ - uint8_t _unused : 7; - - /** Size of the header[] array in bytes. It must be in the range - * [40, 127], which are the smallest header for a TCP packet over - * Ethernet and the maximum possible prepend size supported by - * hardware, respectively. Note that the array storage must be - * padded out to a multiple of four bytes so that the following - * LEPP command is aligned properly. - */ - uint8_t header_size; - - /** Byte offset of the IP header in header[]. */ - uint8_t ip_offset; - - /** Byte offset of the TCP header in header[]. */ - uint8_t tcp_offset; - - /** The number of bytes to use for the payload of each packet, - * except of course the last one, which may not have enough bytes. - * This means that each Ethernet packet except the last will have a - * size of header_size + payload_size. - */ - uint16_t payload_size; - - /** The length of the 'frags' array that follows this struct. */ - uint16_t num_frags; - - /** The actual frags. */ - lepp_frag_t frags[0 /* Variable-sized; num_frags entries. */]; - - /* - * The packet header template logically follows frags[], - * but you can't declare that in C. - * - * uint32_t header[header_size_in_words_rounded_up]; - */ - -} lepp_tso_cmd_t; - - -/** An LEPP completion ring entry. */ -typedef void* lepp_comp_t; - - -/** Maximum number of frags for one TSO command. This is adapted from - * linux's "MAX_SKB_FRAGS", and presumably over-estimates by one, for - * our page size of exactly 65536. We add one for a "body" fragment. - */ -#define LEPP_MAX_FRAGS (65536 / HV_DEFAULT_PAGE_SIZE_SMALL + 2 + 1) - -/** Total number of bytes needed for an lepp_tso_cmd_t. */ -#define LEPP_TSO_CMD_SIZE(num_frags, header_size) \ - (sizeof(lepp_tso_cmd_t) + \ - (num_frags) * sizeof(lepp_frag_t) + \ - (((header_size) + 3) & -4)) - -/** The size of the lepp "cmd" queue. */ -#define LEPP_CMD_QUEUE_BYTES \ - (((CHIP_L2_CACHE_SIZE() - 2 * CHIP_L2_LINE_SIZE()) / \ - (sizeof(lepp_cmd_t) + sizeof(lepp_comp_t))) * sizeof(lepp_cmd_t)) - -/** The largest possible command that can go in lepp_queue_t::cmds[]. */ -#define LEPP_MAX_CMD_SIZE LEPP_TSO_CMD_SIZE(LEPP_MAX_FRAGS, 128) - -/** The largest possible value of lepp_queue_t::cmd_{head, tail} (inclusive). - */ -#define LEPP_CMD_LIMIT \ - (LEPP_CMD_QUEUE_BYTES - LEPP_MAX_CMD_SIZE) - -/** The maximum number of completions in an LEPP queue. */ -#define LEPP_COMP_QUEUE_SIZE \ - ((LEPP_CMD_LIMIT + sizeof(lepp_cmd_t) - 1) / sizeof(lepp_cmd_t)) - -/** Increment an index modulo the queue size. */ -#define LEPP_QINC(var) \ - (var = __insn_mnz(var - (LEPP_COMP_QUEUE_SIZE - 1), var + 1)) - -/** A queue used to convey egress commands from the client to LEPP. */ -typedef struct -{ - /** Index of first completion not yet processed by user code. - * If this is equal to comp_busy, there are no such completions. - * - * NOTE: This is only read/written by the user. - */ - unsigned int comp_head; - - /** Index of first completion record not yet completed. - * If this is equal to comp_tail, there are no such completions. - * This index gets advanced (modulo LEPP_QUEUE_SIZE) whenever - * a command with the 'completion' bit set is finished. - * - * NOTE: This is only written by LEPP, only read by the user. - */ - volatile unsigned int comp_busy; - - /** Index of the first empty slot in the completion ring. - * Entries from this up to but not including comp_head (in ring order) - * can be filled in with completion data. - * - * NOTE: This is only read/written by the user. - */ - unsigned int comp_tail; - - /** Byte index of first command enqueued for LEPP but not yet processed. - * - * This is always divisible by sizeof(void*) and always <= LEPP_CMD_LIMIT. - * - * NOTE: LEPP advances this counter as soon as it no longer needs - * the cmds[] storage for this entry, but the transfer is not actually - * complete (i.e. the buffer pointed to by the command is no longer - * needed) until comp_busy advances. - * - * If this is equal to cmd_tail, the ring is empty. - * - * NOTE: This is only written by LEPP, only read by the user. - */ - volatile unsigned int cmd_head; - - /** Byte index of first empty slot in the command ring. This field can - * be incremented up to but not equal to cmd_head (because that would - * mean the ring is empty). - * - * This is always divisible by sizeof(void*) and always <= LEPP_CMD_LIMIT. - * - * NOTE: This is read/written by the user, only read by LEPP. - */ - volatile unsigned int cmd_tail; - - /** A ring of variable-sized egress DMA commands. - * - * NOTE: Only written by the user, only read by LEPP. - */ - char cmds[LEPP_CMD_QUEUE_BYTES] - __attribute__((aligned(CHIP_L2_LINE_SIZE()))); - - /** A ring of user completion data. - * NOTE: Only read/written by the user. - */ - lepp_comp_t comps[LEPP_COMP_QUEUE_SIZE] - __attribute__((aligned(CHIP_L2_LINE_SIZE()))); -} lepp_queue_t; - - -/** An internal helper function for determining the number of entries - * available in a ring buffer, given that there is one sentinel. - */ -static inline unsigned int -_lepp_num_free_slots(unsigned int head, unsigned int tail) -{ - /* - * One entry is reserved for use as a sentinel, to distinguish - * "empty" from "full". So we compute - * (head - tail - 1) % LEPP_QUEUE_SIZE, but without using a slow % operation. - */ - return (head - tail - 1) + ((head <= tail) ? LEPP_COMP_QUEUE_SIZE : 0); -} - - -/** Returns how many new comp entries can be enqueued. */ -static inline unsigned int -lepp_num_free_comp_slots(const lepp_queue_t* q) -{ - return _lepp_num_free_slots(q->comp_head, q->comp_tail); -} - -static inline int -lepp_qsub(int v1, int v2) -{ - int delta = v1 - v2; - return delta + ((delta >> 31) & LEPP_COMP_QUEUE_SIZE); -} - - -/** FIXME: Check this from linux, via a new "pwrite()" call. */ -#define LIPP_VERSION 1 - - -/** We use exactly two bytes of alignment padding. */ -#define LIPP_PACKET_PADDING 2 - -/** The minimum size of a "small" buffer (including the padding). */ -#define LIPP_SMALL_PACKET_SIZE 128 - -/* - * NOTE: The following two values should total to less than around - * 13582, to keep the total size used for "lipp_state_t" below 64K. - */ - -/** The maximum number of "small" buffers. - * This is enough for 53 network cpus with 128 credits. Note that - * if these are exhausted, we will fall back to using large buffers. - */ -#define LIPP_SMALL_BUFFERS 6785 - -/** The maximum number of "large" buffers. - * This is enough for 53 network cpus with 128 credits. - */ -#define LIPP_LARGE_BUFFERS 6785 - -#endif /* __DRV_XGBE_INTF_H__ */ diff --git a/arch/tile/include/hv/hypervisor.h b/arch/tile/include/hv/hypervisor.h deleted file mode 100644 index f10b332b3b65..000000000000 --- a/arch/tile/include/hv/hypervisor.h +++ /dev/null @@ -1,2656 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/** - * @file hypervisor.h - * The hypervisor's public API. - */ - -#ifndef _HV_HV_H -#define _HV_HV_H - -#include <arch/chip.h> - -/* Linux builds want unsigned long constants, but assembler wants numbers */ -#ifdef __ASSEMBLER__ -/** One, for assembler */ -#define __HV_SIZE_ONE 1 -#elif !defined(__tile__) && CHIP_VA_WIDTH() > 32 -/** One, for 64-bit on host */ -#define __HV_SIZE_ONE 1ULL -#else -/** One, for Linux */ -#define __HV_SIZE_ONE 1UL -#endif - -/** The log2 of the span of a level-1 page table, in bytes. - */ -#define HV_LOG2_L1_SPAN 32 - -/** The span of a level-1 page table, in bytes. - */ -#define HV_L1_SPAN (__HV_SIZE_ONE << HV_LOG2_L1_SPAN) - -/** The log2 of the initial size of small pages, in bytes. - * See HV_DEFAULT_PAGE_SIZE_SMALL. - */ -#define HV_LOG2_DEFAULT_PAGE_SIZE_SMALL 16 - -/** The initial size of small pages, in bytes. This value should be verified - * at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL). - * It may also be modified when installing a new context. - */ -#define HV_DEFAULT_PAGE_SIZE_SMALL \ - (__HV_SIZE_ONE << HV_LOG2_DEFAULT_PAGE_SIZE_SMALL) - -/** The log2 of the initial size of large pages, in bytes. - * See HV_DEFAULT_PAGE_SIZE_LARGE. - */ -#define HV_LOG2_DEFAULT_PAGE_SIZE_LARGE 24 - -/** The initial size of large pages, in bytes. This value should be verified - * at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE). - * It may also be modified when installing a new context. - */ -#define HV_DEFAULT_PAGE_SIZE_LARGE \ - (__HV_SIZE_ONE << HV_LOG2_DEFAULT_PAGE_SIZE_LARGE) - -#if CHIP_VA_WIDTH() > 32 - -/** The log2 of the initial size of jumbo pages, in bytes. - * See HV_DEFAULT_PAGE_SIZE_JUMBO. - */ -#define HV_LOG2_DEFAULT_PAGE_SIZE_JUMBO 32 - -/** The initial size of jumbo pages, in bytes. This value should - * be verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_JUMBO). - * It may also be modified when installing a new context. - */ -#define HV_DEFAULT_PAGE_SIZE_JUMBO \ - (__HV_SIZE_ONE << HV_LOG2_DEFAULT_PAGE_SIZE_JUMBO) - -#endif - -/** The log2 of the granularity at which page tables must be aligned; - * in other words, the CPA for a page table must have this many zero - * bits at the bottom of the address. - */ -#define HV_LOG2_PAGE_TABLE_ALIGN 11 - -/** The granularity at which page tables must be aligned. - */ -#define HV_PAGE_TABLE_ALIGN (__HV_SIZE_ONE << HV_LOG2_PAGE_TABLE_ALIGN) - -/** Normal start of hypervisor glue in client physical memory. */ -#define HV_GLUE_START_CPA 0x10000 - -/** This much space is reserved at HV_GLUE_START_CPA - * for the hypervisor glue. The client program must start at - * some address higher than this, and in particular the address of - * its text section should be equal to zero modulo HV_PAGE_SIZE_LARGE - * so that relative offsets to the HV glue are correct. - */ -#define HV_GLUE_RESERVED_SIZE 0x10000 - -/** Each entry in the hv dispatch array takes this many bytes. */ -#define HV_DISPATCH_ENTRY_SIZE 32 - -/** Version of the hypervisor interface defined by this file */ -#define _HV_VERSION 13 - -/** Last version of the hypervisor interface with old hv_init() ABI. - * - * The change from version 12 to version 13 corresponds to launching - * the client by default at PL2 instead of PL1 (corresponding to the - * hv itself running at PL3 instead of PL2). To make this explicit, - * the hv_init() API was also extended so the client can report its - * desired PL, resulting in a more helpful failure diagnostic. If you - * call hv_init() with _HV_VERSION_OLD_HV_INIT and omit the client_pl - * argument, the hypervisor will assume client_pl = 1. - * - * Note that this is a deprecated solution and we do not expect to - * support clients of the Tilera hypervisor running at PL1 indefinitely. - */ -#define _HV_VERSION_OLD_HV_INIT 12 - -/* Index into hypervisor interface dispatch code blocks. - * - * Hypervisor calls are invoked from user space by calling code - * at an address HV_BASE_ADDRESS + (index) * HV_DISPATCH_ENTRY_SIZE, - * where index is one of these enum values. - * - * Normally a supervisor is expected to produce a set of symbols - * starting at HV_BASE_ADDRESS that obey this convention, but a user - * program could call directly through function pointers if desired. - * - * These numbers are part of the binary API and will not be changed - * without updating HV_VERSION, which should be a rare event. - */ - -/** reserved. */ -#define _HV_DISPATCH_RESERVED 0 - -/** hv_init */ -#define HV_DISPATCH_INIT 1 - -/** hv_install_context */ -#define HV_DISPATCH_INSTALL_CONTEXT 2 - -/** hv_sysconf */ -#define HV_DISPATCH_SYSCONF 3 - -/** hv_get_rtc */ -#define HV_DISPATCH_GET_RTC 4 - -/** hv_set_rtc */ -#define HV_DISPATCH_SET_RTC 5 - -/** hv_flush_asid */ -#define HV_DISPATCH_FLUSH_ASID 6 - -/** hv_flush_page */ -#define HV_DISPATCH_FLUSH_PAGE 7 - -/** hv_flush_pages */ -#define HV_DISPATCH_FLUSH_PAGES 8 - -/** hv_restart */ -#define HV_DISPATCH_RESTART 9 - -/** hv_halt */ -#define HV_DISPATCH_HALT 10 - -/** hv_power_off */ -#define HV_DISPATCH_POWER_OFF 11 - -/** hv_inquire_physical */ -#define HV_DISPATCH_INQUIRE_PHYSICAL 12 - -/** hv_inquire_memory_controller */ -#define HV_DISPATCH_INQUIRE_MEMORY_CONTROLLER 13 - -/** hv_inquire_virtual */ -#define HV_DISPATCH_INQUIRE_VIRTUAL 14 - -/** hv_inquire_asid */ -#define HV_DISPATCH_INQUIRE_ASID 15 - -/** hv_nanosleep */ -#define HV_DISPATCH_NANOSLEEP 16 - -/** hv_console_read_if_ready */ -#define HV_DISPATCH_CONSOLE_READ_IF_READY 17 - -/** hv_console_write */ -#define HV_DISPATCH_CONSOLE_WRITE 18 - -/** hv_downcall_dispatch */ -#define HV_DISPATCH_DOWNCALL_DISPATCH 19 - -/** hv_inquire_topology */ -#define HV_DISPATCH_INQUIRE_TOPOLOGY 20 - -/** hv_fs_findfile */ -#define HV_DISPATCH_FS_FINDFILE 21 - -/** hv_fs_fstat */ -#define HV_DISPATCH_FS_FSTAT 22 - -/** hv_fs_pread */ -#define HV_DISPATCH_FS_PREAD 23 - -/** hv_physaddr_read64 */ -#define HV_DISPATCH_PHYSADDR_READ64 24 - -/** hv_physaddr_write64 */ -#define HV_DISPATCH_PHYSADDR_WRITE64 25 - -/** hv_get_command_line */ -#define HV_DISPATCH_GET_COMMAND_LINE 26 - -/** hv_set_caching */ -#define HV_DISPATCH_SET_CACHING 27 - -/** hv_bzero_page */ -#define HV_DISPATCH_BZERO_PAGE 28 - -/** hv_register_message_state */ -#define HV_DISPATCH_REGISTER_MESSAGE_STATE 29 - -/** hv_send_message */ -#define HV_DISPATCH_SEND_MESSAGE 30 - -/** hv_receive_message */ -#define HV_DISPATCH_RECEIVE_MESSAGE 31 - -/** hv_inquire_context */ -#define HV_DISPATCH_INQUIRE_CONTEXT 32 - -/** hv_start_all_tiles */ -#define HV_DISPATCH_START_ALL_TILES 33 - -/** hv_dev_open */ -#define HV_DISPATCH_DEV_OPEN 34 - -/** hv_dev_close */ -#define HV_DISPATCH_DEV_CLOSE 35 - -/** hv_dev_pread */ -#define HV_DISPATCH_DEV_PREAD 36 - -/** hv_dev_pwrite */ -#define HV_DISPATCH_DEV_PWRITE 37 - -/** hv_dev_poll */ -#define HV_DISPATCH_DEV_POLL 38 - -/** hv_dev_poll_cancel */ -#define HV_DISPATCH_DEV_POLL_CANCEL 39 - -/** hv_dev_preada */ -#define HV_DISPATCH_DEV_PREADA 40 - -/** hv_dev_pwritea */ -#define HV_DISPATCH_DEV_PWRITEA 41 - -/** hv_flush_remote */ -#define HV_DISPATCH_FLUSH_REMOTE 42 - -/** hv_console_putc */ -#define HV_DISPATCH_CONSOLE_PUTC 43 - -/** hv_inquire_tiles */ -#define HV_DISPATCH_INQUIRE_TILES 44 - -/** hv_confstr */ -#define HV_DISPATCH_CONFSTR 45 - -/** hv_reexec */ -#define HV_DISPATCH_REEXEC 46 - -/** hv_set_command_line */ -#define HV_DISPATCH_SET_COMMAND_LINE 47 - -#if !CHIP_HAS_IPI() - -/** hv_clear_intr */ -#define HV_DISPATCH_CLEAR_INTR 48 - -/** hv_enable_intr */ -#define HV_DISPATCH_ENABLE_INTR 49 - -/** hv_disable_intr */ -#define HV_DISPATCH_DISABLE_INTR 50 - -/** hv_raise_intr */ -#define HV_DISPATCH_RAISE_INTR 51 - -/** hv_trigger_ipi */ -#define HV_DISPATCH_TRIGGER_IPI 52 - -#endif /* !CHIP_HAS_IPI() */ - -/** hv_store_mapping */ -#define HV_DISPATCH_STORE_MAPPING 53 - -/** hv_inquire_realpa */ -#define HV_DISPATCH_INQUIRE_REALPA 54 - -/** hv_flush_all */ -#define HV_DISPATCH_FLUSH_ALL 55 - -#if CHIP_HAS_IPI() -/** hv_get_ipi_pte */ -#define HV_DISPATCH_GET_IPI_PTE 56 -#endif - -/** hv_set_pte_super_shift */ -#define HV_DISPATCH_SET_PTE_SUPER_SHIFT 57 - -/** hv_console_set_ipi */ -#define HV_DISPATCH_CONSOLE_SET_IPI 63 - -/** hv_send_nmi */ -#define HV_DISPATCH_SEND_NMI 65 - -/** One more than the largest dispatch value */ -#define _HV_DISPATCH_END 66 - - -#ifndef __ASSEMBLER__ - -#ifdef __KERNEL__ -#include <asm/types.h> -typedef u32 __hv32; /**< 32-bit value */ -typedef u64 __hv64; /**< 64-bit value */ -#else -#include <stdint.h> -typedef uint32_t __hv32; /**< 32-bit value */ -typedef uint64_t __hv64; /**< 64-bit value */ -#endif - - -/** Hypervisor physical address. */ -typedef __hv64 HV_PhysAddr; - -#if CHIP_VA_WIDTH() > 32 -/** Hypervisor virtual address. */ -typedef __hv64 HV_VirtAddr; -#else -/** Hypervisor virtual address. */ -typedef __hv32 HV_VirtAddr; -#endif /* CHIP_VA_WIDTH() > 32 */ - -/** Hypervisor ASID. */ -typedef unsigned int HV_ASID; - -/** Hypervisor tile location for a memory access - * ("location overridden target"). - */ -typedef unsigned int HV_LOTAR; - -/** Hypervisor size of a page. */ -typedef unsigned long HV_PageSize; - -/** A page table entry. - */ -typedef struct -{ - __hv64 val; /**< Value of PTE */ -} HV_PTE; - -/** Hypervisor error code. */ -typedef int HV_Errno; - -#endif /* !__ASSEMBLER__ */ - -#define HV_OK 0 /**< No error */ -#define HV_EINVAL -801 /**< Invalid argument */ -#define HV_ENODEV -802 /**< No such device */ -#define HV_ENOENT -803 /**< No such file or directory */ -#define HV_EBADF -804 /**< Bad file number */ -#define HV_EFAULT -805 /**< Bad address */ -#define HV_ERECIP -806 /**< Bad recipients */ -#define HV_E2BIG -807 /**< Message too big */ -#define HV_ENOTSUP -808 /**< Service not supported */ -#define HV_EBUSY -809 /**< Device busy */ -#define HV_ENOSYS -810 /**< Invalid syscall */ -#define HV_EPERM -811 /**< No permission */ -#define HV_ENOTREADY -812 /**< Device not ready */ -#define HV_EIO -813 /**< I/O error */ -#define HV_ENOMEM -814 /**< Out of memory */ -#define HV_EAGAIN -815 /**< Try again */ - -#define HV_ERR_MAX -801 /**< Largest HV error code */ -#define HV_ERR_MIN -815 /**< Smallest HV error code */ - -#ifndef __ASSEMBLER__ - -/** Pass HV_VERSION to hv_init to request this version of the interface. */ -typedef enum { - HV_VERSION = _HV_VERSION, - HV_VERSION_OLD_HV_INIT = _HV_VERSION_OLD_HV_INIT, - -} HV_VersionNumber; - -/** Initializes the hypervisor. - * - * @param interface_version_number The version of the hypervisor interface - * that this program expects, typically HV_VERSION. - * @param chip_num Architecture number of the chip the client was built for. - * @param chip_rev_num Revision number of the chip the client was built for. - * @param client_pl Privilege level the client is built for - * (not required if interface_version_number == HV_VERSION_OLD_HV_INIT). - */ -void hv_init(HV_VersionNumber interface_version_number, - int chip_num, int chip_rev_num, int client_pl); - - -/** Queries we can make for hv_sysconf(). - * - * These numbers are part of the binary API and guaranteed not to change. - */ -typedef enum { - /** An invalid value; do not use. */ - _HV_SYSCONF_RESERVED = 0, - - /** The length of the glue section containing the hv_ procs, in bytes. */ - HV_SYSCONF_GLUE_SIZE = 1, - - /** The size of small pages, in bytes. */ - HV_SYSCONF_PAGE_SIZE_SMALL = 2, - - /** The size of large pages, in bytes. */ - HV_SYSCONF_PAGE_SIZE_LARGE = 3, - - /** Processor clock speed, in hertz. */ - HV_SYSCONF_CPU_SPEED = 4, - - /** Processor temperature, in degrees Kelvin. The value - * HV_SYSCONF_TEMP_KTOC may be subtracted from this to get degrees - * Celsius. If that Celsius value is HV_SYSCONF_OVERTEMP, this indicates - * that the temperature has hit an upper limit and is no longer being - * accurately tracked. - */ - HV_SYSCONF_CPU_TEMP = 5, - - /** Board temperature, in degrees Kelvin. The value - * HV_SYSCONF_TEMP_KTOC may be subtracted from this to get degrees - * Celsius. If that Celsius value is HV_SYSCONF_OVERTEMP, this indicates - * that the temperature has hit an upper limit and is no longer being - * accurately tracked. - */ - HV_SYSCONF_BOARD_TEMP = 6, - - /** Legal page size bitmask for hv_install_context(). - * For example, if 16KB and 64KB small pages are supported, - * it would return "HV_CTX_PG_SM_16K | HV_CTX_PG_SM_64K". - */ - HV_SYSCONF_VALID_PAGE_SIZES = 7, - - /** The size of jumbo pages, in bytes. - * If no jumbo pages are available, zero will be returned. - */ - HV_SYSCONF_PAGE_SIZE_JUMBO = 8, - -} HV_SysconfQuery; - -/** Offset to subtract from returned Kelvin temperature to get degrees - Celsius. */ -#define HV_SYSCONF_TEMP_KTOC 273 - -/** Pseudo-temperature value indicating that the temperature has - * pegged at its upper limit and is no longer accurate; note that this is - * the value after subtracting HV_SYSCONF_TEMP_KTOC. */ -#define HV_SYSCONF_OVERTEMP 999 - -/** Query a configuration value from the hypervisor. - * @param query Which value is requested (HV_SYSCONF_xxx). - * @return The requested value, or -1 the requested value is illegal or - * unavailable. - */ -long hv_sysconf(HV_SysconfQuery query); - - -/** Queries we can make for hv_confstr(). - * - * These numbers are part of the binary API and guaranteed not to change. - */ -typedef enum { - /** An invalid value; do not use. */ - _HV_CONFSTR_RESERVED = 0, - - /** Board part number. */ - HV_CONFSTR_BOARD_PART_NUM = 1, - - /** Board serial number. */ - HV_CONFSTR_BOARD_SERIAL_NUM = 2, - - /** Chip serial number. */ - HV_CONFSTR_CHIP_SERIAL_NUM = 3, - - /** Board revision level. */ - HV_CONFSTR_BOARD_REV = 4, - - /** Hypervisor software version. */ - HV_CONFSTR_HV_SW_VER = 5, - - /** The name for this chip model. */ - HV_CONFSTR_CHIP_MODEL = 6, - - /** Human-readable board description. */ - HV_CONFSTR_BOARD_DESC = 7, - - /** Human-readable description of the hypervisor configuration. */ - HV_CONFSTR_HV_CONFIG = 8, - - /** Human-readable version string for the boot image (for instance, - * who built it and when, what configuration file was used). */ - HV_CONFSTR_HV_CONFIG_VER = 9, - - /** Mezzanine part number. */ - HV_CONFSTR_MEZZ_PART_NUM = 10, - - /** Mezzanine serial number. */ - HV_CONFSTR_MEZZ_SERIAL_NUM = 11, - - /** Mezzanine revision level. */ - HV_CONFSTR_MEZZ_REV = 12, - - /** Human-readable mezzanine description. */ - HV_CONFSTR_MEZZ_DESC = 13, - - /** Control path for the onboard network switch. */ - HV_CONFSTR_SWITCH_CONTROL = 14, - - /** Chip revision level. */ - HV_CONFSTR_CHIP_REV = 15, - - /** CPU module part number. */ - HV_CONFSTR_CPUMOD_PART_NUM = 16, - - /** CPU module serial number. */ - HV_CONFSTR_CPUMOD_SERIAL_NUM = 17, - - /** CPU module revision level. */ - HV_CONFSTR_CPUMOD_REV = 18, - - /** Human-readable CPU module description. */ - HV_CONFSTR_CPUMOD_DESC = 19, - - /** Per-tile hypervisor statistics. When this identifier is specified, - * the hv_confstr call takes two extra arguments. The first is the - * HV_XY_TO_LOTAR of the target tile's coordinates. The second is - * a flag word. The only current flag is the lowest bit, which means - * "zero out the stats instead of retrieving them"; in this case the - * buffer and buffer length are ignored. */ - HV_CONFSTR_HV_STATS = 20 - -} HV_ConfstrQuery; - -/** Query a configuration string from the hypervisor. - * - * @param query Identifier for the specific string to be retrieved - * (HV_CONFSTR_xxx). Some strings may require or permit extra - * arguments to be appended which select specific objects to be - * described; see the string descriptions above. - * @param buf Buffer in which to place the string. - * @param len Length of the buffer. - * @return If query is valid, then the length of the corresponding string, - * including the trailing null; if this is greater than len, the string - * was truncated. If query is invalid, HV_EINVAL. If the specified - * buffer is not writable by the client, HV_EFAULT. - */ -int hv_confstr(HV_ConfstrQuery query, HV_VirtAddr buf, int len, ...); - -/** Tile coordinate */ -typedef struct -{ - /** X coordinate, relative to supervisor's top-left coordinate */ - int x; - - /** Y coordinate, relative to supervisor's top-left coordinate */ - int y; -} HV_Coord; - - -#if CHIP_HAS_IPI() - -/** Get the PTE for sending an IPI to a particular tile. - * - * @param tile Tile which will receive the IPI. - * @param pl Indicates which IPI registers: 0 = IPI_0, 1 = IPI_1. - * @param pte Filled with resulting PTE. - * @result Zero if no error, non-zero for invalid parameters. - */ -int hv_get_ipi_pte(HV_Coord tile, int pl, HV_PTE* pte); - -/** Configure the console interrupt. - * - * When the console client interrupt is enabled, the hypervisor will - * deliver the specified IPI to the client in the following situations: - * - * - The console has at least one character available for input. - * - * - The console can accept new characters for output, and the last call - * to hv_console_write() did not write all of the characters requested - * by the client. - * - * Note that in some system configurations, console interrupt will not - * be available; clients should be prepared for this routine to fail and - * to fall back to periodic console polling in that case. - * - * @param ipi Index of the IPI register which will receive the interrupt. - * @param event IPI event number for console interrupt. If less than 0, - * disable the console IPI interrupt. - * @param coord Tile to be targeted for console interrupt. - * @return 0 on success, otherwise, HV_EINVAL if illegal parameter, - * HV_ENOTSUP if console interrupt are not available. - */ -int hv_console_set_ipi(int ipi, int event, HV_Coord coord); - -#else /* !CHIP_HAS_IPI() */ - -/** A set of interrupts. */ -typedef __hv32 HV_IntrMask; - -/** The low interrupt numbers are reserved for use by the client in - * delivering IPIs. Any interrupt numbers higher than this value are - * reserved for use by HV device drivers. */ -#define HV_MAX_IPI_INTERRUPT 7 - -/** Enable a set of device interrupts. - * - * @param enab_mask Bitmap of interrupts to enable. - */ -void hv_enable_intr(HV_IntrMask enab_mask); - -/** Disable a set of device interrupts. - * - * @param disab_mask Bitmap of interrupts to disable. - */ -void hv_disable_intr(HV_IntrMask disab_mask); - -/** Clear a set of device interrupts. - * - * @param clear_mask Bitmap of interrupts to clear. - */ -void hv_clear_intr(HV_IntrMask clear_mask); - -/** Raise a set of device interrupts. - * - * @param raise_mask Bitmap of interrupts to raise. - */ -void hv_raise_intr(HV_IntrMask raise_mask); - -/** Trigger a one-shot interrupt on some tile - * - * @param tile Which tile to interrupt. - * @param interrupt Interrupt number to trigger; must be between 0 and - * HV_MAX_IPI_INTERRUPT. - * @return HV_OK on success, or a hypervisor error code. - */ -HV_Errno hv_trigger_ipi(HV_Coord tile, int interrupt); - -#endif /* !CHIP_HAS_IPI() */ - -/** Store memory mapping in debug memory so that external debugger can read it. - * A maximum of 16 entries can be stored. - * - * @param va VA of memory that is mapped. - * @param len Length of mapped memory. - * @param pa PA of memory that is mapped. - * @return 0 on success, -1 if the maximum number of mappings is exceeded. - */ -int hv_store_mapping(HV_VirtAddr va, unsigned int len, HV_PhysAddr pa); - -/** Given a client PA and a length, return its real (HV) PA. - * - * @param cpa Client physical address. - * @param len Length of mapped memory. - * @return physical address, or -1 if cpa or len is not valid. - */ -HV_PhysAddr hv_inquire_realpa(HV_PhysAddr cpa, unsigned int len); - -/** RTC return flag for no RTC chip present. - */ -#define HV_RTC_NO_CHIP 0x1 - -/** RTC return flag for low-voltage condition, indicating that battery had - * died and time read is unreliable. - */ -#define HV_RTC_LOW_VOLTAGE 0x2 - -/** Date/Time of day */ -typedef struct { -#if CHIP_WORD_SIZE() > 32 - __hv64 tm_sec; /**< Seconds, 0-59 */ - __hv64 tm_min; /**< Minutes, 0-59 */ - __hv64 tm_hour; /**< Hours, 0-23 */ - __hv64 tm_mday; /**< Day of month, 0-30 */ - __hv64 tm_mon; /**< Month, 0-11 */ - __hv64 tm_year; /**< Years since 1900, 0-199 */ - __hv64 flags; /**< Return flags, 0 if no error */ -#else - __hv32 tm_sec; /**< Seconds, 0-59 */ - __hv32 tm_min; /**< Minutes, 0-59 */ - __hv32 tm_hour; /**< Hours, 0-23 */ - __hv32 tm_mday; /**< Day of month, 0-30 */ - __hv32 tm_mon; /**< Month, 0-11 */ - __hv32 tm_year; /**< Years since 1900, 0-199 */ - __hv32 flags; /**< Return flags, 0 if no error */ -#endif -} HV_RTCTime; - -/** Read the current time-of-day clock. - * @return HV_RTCTime of current time (GMT). - */ -HV_RTCTime hv_get_rtc(void); - - -/** Set the current time-of-day clock. - * @param time time to reset time-of-day to (GMT). - */ -void hv_set_rtc(HV_RTCTime time); - -/** Installs a context, comprising a page table and other attributes. - * - * Once this service completes, page_table will be used to translate - * subsequent virtual address references to physical memory. - * - * Installing a context does not cause an implicit TLB flush. Before - * reusing an ASID value for a different address space, the client is - * expected to flush old references from the TLB with hv_flush_asid(). - * (Alternately, hv_flush_all() may be used to flush many ASIDs at once.) - * After invalidating a page table entry, changing its attributes, or - * changing its target CPA, the client is expected to flush old references - * from the TLB with hv_flush_page() or hv_flush_pages(). Making a - * previously invalid page valid does not require a flush. - * - * Specifying an invalid ASID, or an invalid CPA (client physical address) - * (either as page_table_pointer, or within the referenced table), - * or another page table data item documented as above as illegal may - * lead to client termination; since the validation of the table is - * done as needed, this may happen before the service returns, or at - * some later time, or never, depending upon the client's pattern of - * memory references. Page table entries which supply translations for - * invalid virtual addresses may result in client termination, or may - * be silently ignored. "Invalid" in this context means a value which - * was not provided to the client via the appropriate hv_inquire_* routine. - * - * To support changing the instruction VAs at the same time as - * installing the new page table, this call explicitly supports - * setting the "lr" register to a different address and then jumping - * directly to the hv_install_context() routine. In this case, the - * new page table does not need to contain any mapping for the - * hv_install_context address itself. - * - * At most one HV_CTX_PG_SM_* flag may be specified in "flags"; - * if multiple flags are specified, HV_EINVAL is returned. - * Specifying none of the flags results in using the default page size. - * All cores participating in a given client must request the same - * page size, or the results are undefined. - * - * @param page_table Root of the page table. - * @param access PTE providing info on how to read the page table. This - * value must be consistent between multiple tiles sharing a page table, - * and must also be consistent with any virtual mappings the client - * may be using to access the page table. - * @param asid HV_ASID the page table is to be used for. - * @param flags Context flags, denoting attributes or privileges of the - * current context (HV_CTX_xxx). - * @return Zero on success, or a hypervisor error code on failure. - */ -int hv_install_context(HV_PhysAddr page_table, HV_PTE access, HV_ASID asid, - __hv32 flags); - -#endif /* !__ASSEMBLER__ */ - -#define HV_CTX_DIRECTIO 0x1 /**< Direct I/O requests are accepted from - PL0. */ - -#define HV_CTX_PG_SM_4K 0x10 /**< Use 4K small pages, if available. */ -#define HV_CTX_PG_SM_16K 0x20 /**< Use 16K small pages, if available. */ -#define HV_CTX_PG_SM_64K 0x40 /**< Use 64K small pages, if available. */ -#define HV_CTX_PG_SM_MASK 0xf0 /**< Mask of all possible small pages. */ - -#ifndef __ASSEMBLER__ - - -/** Set the number of pages ganged together by HV_PTE_SUPER at a - * particular level of the page table. - * - * The current TILE-Gx hardware only supports powers of four - * (i.e. log2_count must be a multiple of two), and the requested - * "super" page size must be less than the span of the next level in - * the page table. The largest size that can be requested is 64GB. - * - * The shift value is initially "0" for all page table levels, - * indicating that the HV_PTE_SUPER bit is effectively ignored. - * - * If you change the count from one non-zero value to another, the - * hypervisor will flush the entire TLB and TSB to avoid confusion. - * - * @param level Page table level (0, 1, or 2) - * @param log2_count Base-2 log of the number of pages to gang together, - * i.e. how much to shift left the base page size for the super page size. - * @return Zero on success, or a hypervisor error code on failure. - */ -int hv_set_pte_super_shift(int level, int log2_count); - - -/** Value returned from hv_inquire_context(). */ -typedef struct -{ - /** Physical address of page table */ - HV_PhysAddr page_table; - - /** PTE which defines access method for top of page table */ - HV_PTE access; - - /** ASID associated with this page table */ - HV_ASID asid; - - /** Context flags */ - __hv32 flags; -} HV_Context; - -/** Retrieve information about the currently installed context. - * @return The data passed to the last successful hv_install_context call. - */ -HV_Context hv_inquire_context(void); - - -/** Flushes all translations associated with the named address space - * identifier from the TLB and any other hypervisor data structures. - * Translations installed with the "global" bit are not flushed. - * - * Specifying an invalid ASID may lead to client termination. "Invalid" - * in this context means a value which was not provided to the client - * via <tt>hv_inquire_asid()</tt>. - * - * @param asid HV_ASID whose entries are to be flushed. - * @return Zero on success, or a hypervisor error code on failure. -*/ -int hv_flush_asid(HV_ASID asid); - - -/** Flushes all translations associated with the named virtual address - * and page size from the TLB and other hypervisor data structures. Only - * pages visible to the current ASID are affected; note that this includes - * global pages in addition to pages specific to the current ASID. - * - * The supplied VA need not be aligned; it may be anywhere in the - * subject page. - * - * Specifying an invalid virtual address may lead to client termination, - * or may silently succeed. "Invalid" in this context means a value - * which was not provided to the client via hv_inquire_virtual. - * - * @param address Address of the page to flush. - * @param page_size Size of pages to assume. - * @return Zero on success, or a hypervisor error code on failure. - */ -int hv_flush_page(HV_VirtAddr address, HV_PageSize page_size); - - -/** Flushes all translations associated with the named virtual address range - * and page size from the TLB and other hypervisor data structures. Only - * pages visible to the current ASID are affected; note that this includes - * global pages in addition to pages specific to the current ASID. - * - * The supplied VA need not be aligned; it may be anywhere in the - * subject page. - * - * Specifying an invalid virtual address may lead to client termination, - * or may silently succeed. "Invalid" in this context means a value - * which was not provided to the client via hv_inquire_virtual. - * - * @param start Address to flush. - * @param page_size Size of pages to assume. - * @param size The number of bytes to flush. Any page in the range - * [start, start + size) will be flushed from the TLB. - * @return Zero on success, or a hypervisor error code on failure. - */ -int hv_flush_pages(HV_VirtAddr start, HV_PageSize page_size, - unsigned long size); - - -/** Flushes all non-global translations (if preserve_global is true), - * or absolutely all translations (if preserve_global is false). - * - * @param preserve_global Non-zero if we want to preserve "global" mappings. - * @return Zero on success, or a hypervisor error code on failure. -*/ -int hv_flush_all(int preserve_global); - - -/** Restart machine with optional restart command and optional args. - * @param cmd Const pointer to command to restart with, or NULL - * @param args Const pointer to argument string to restart with, or NULL - */ -void hv_restart(HV_VirtAddr cmd, HV_VirtAddr args); - - -/** Halt machine. */ -void hv_halt(void); - - -/** Power off machine. */ -void hv_power_off(void); - - -/** Re-enter virtual-is-physical memory translation mode and restart - * execution at a given address. - * @param entry Client physical address at which to begin execution. - * @return A hypervisor error code on failure; if the operation is - * successful the call does not return. - */ -int hv_reexec(HV_PhysAddr entry); - - -/** Chip topology */ -typedef struct -{ - /** Relative coordinates of the querying tile */ - HV_Coord coord; - - /** Width of the querying supervisor's tile rectangle. */ - int width; - - /** Height of the querying supervisor's tile rectangle. */ - int height; - -} HV_Topology; - -/** Returns information about the tile coordinate system. - * - * Each supervisor is given a rectangle of tiles it potentially controls. - * These tiles are labeled using a relative coordinate system with (0,0) as - * the upper left tile regardless of their physical location on the chip. - * - * This call returns both the size of that rectangle and the position - * within that rectangle of the querying tile. - * - * Not all tiles within that rectangle may be available to the supervisor; - * to get the precise set of available tiles, you must also call - * hv_inquire_tiles(HV_INQ_TILES_AVAIL, ...). - **/ -HV_Topology hv_inquire_topology(void); - -/** Sets of tiles we can retrieve with hv_inquire_tiles(). - * - * These numbers are part of the binary API and guaranteed not to change. - */ -typedef enum { - /** An invalid value; do not use. */ - _HV_INQ_TILES_RESERVED = 0, - - /** All available tiles within the supervisor's tile rectangle. */ - HV_INQ_TILES_AVAIL = 1, - - /** The set of tiles used for hash-for-home caching. */ - HV_INQ_TILES_HFH_CACHE = 2, - - /** The set of tiles that can be legally used as a LOTAR for a PTE. */ - HV_INQ_TILES_LOTAR = 3, - - /** The set of "shared" driver tiles that the hypervisor may - * periodically interrupt. */ - HV_INQ_TILES_SHARED = 4 -} HV_InqTileSet; - -/** Returns specific information about various sets of tiles within the - * supervisor's tile rectangle. - * - * @param set Which set of tiles to retrieve. - * @param cpumask Pointer to a returned bitmask (in row-major order, - * supervisor-relative) of tiles. The low bit of the first word - * corresponds to the tile at the upper left-hand corner of the - * supervisor's rectangle. In order for the supervisor to know the - * buffer length to supply, it should first call hv_inquire_topology. - * @param length Number of bytes available for the returned bitmask. - **/ -HV_Errno hv_inquire_tiles(HV_InqTileSet set, HV_VirtAddr cpumask, int length); - - -/** An identifier for a memory controller. Multiple memory controllers - * may be connected to one chip, and this uniquely identifies each one. - */ -typedef int HV_MemoryController; - -/** A range of physical memory. */ -typedef struct -{ - HV_PhysAddr start; /**< Starting address. */ - __hv64 size; /**< Size in bytes. */ - HV_MemoryController controller; /**< Which memory controller owns this. */ -} HV_PhysAddrRange; - -/** Returns information about a range of physical memory. - * - * hv_inquire_physical() returns one of the ranges of client - * physical addresses which are available to this client. - * - * The first range is retrieved by specifying an idx of 0, and - * successive ranges are returned with subsequent idx values. Ranges - * are ordered by increasing start address (i.e., as idx increases, - * so does start), do not overlap, and do not touch (i.e., the - * available memory is described with the fewest possible ranges). - * - * If an out-of-range idx value is specified, the returned size will be zero. - * A client can count the number of ranges by increasing idx until the - * returned size is zero. There will always be at least one valid range. - * - * Some clients might not be prepared to deal with more than one - * physical address range; they still ought to call this routine and - * issue a warning message if they're given more than one range, on the - * theory that whoever configured the hypervisor to provide that memory - * should know that it's being wasted. - */ -HV_PhysAddrRange hv_inquire_physical(int idx); - -/** Possible DIMM types. */ -typedef enum -{ - NO_DIMM = 0, /**< No DIMM */ - DDR2 = 1, /**< DDR2 */ - DDR3 = 2 /**< DDR3 */ -} HV_DIMM_Type; - -#ifdef __tilegx__ - -/** Log2 of minimum DIMM bytes supported by the memory controller. */ -#define HV_MSH_MIN_DIMM_SIZE_SHIFT 29 - -/** Max number of DIMMs contained by one memory controller. */ -#define HV_MSH_MAX_DIMMS 8 - -#else - -/** Log2 of minimum DIMM bytes supported by the memory controller. */ -#define HV_MSH_MIN_DIMM_SIZE_SHIFT 26 - -/** Max number of DIMMs contained by one memory controller. */ -#define HV_MSH_MAX_DIMMS 2 - -#endif - -/** Number of bits to right-shift to get the DIMM type. */ -#define HV_DIMM_TYPE_SHIFT 0 - -/** Bits to mask to get the DIMM type. */ -#define HV_DIMM_TYPE_MASK 0xf - -/** Number of bits to right-shift to get the DIMM size. */ -#define HV_DIMM_SIZE_SHIFT 4 - -/** Bits to mask to get the DIMM size. */ -#define HV_DIMM_SIZE_MASK 0xf - -/** Memory controller information. */ -typedef struct -{ - HV_Coord coord; /**< Relative tile coordinates of the port used by a - specified tile to communicate with this controller. */ - __hv64 speed; /**< Speed of this controller in bytes per second. */ -} HV_MemoryControllerInfo; - -/** Returns information about a particular memory controller. - * - * hv_inquire_memory_controller(coord,idx) returns information about a - * particular controller. Two pieces of information are returned: - * - The relative coordinates of the port on the controller that the specified - * tile would use to contact it. The relative coordinates may lie - * outside the supervisor's rectangle, i.e. the controller may not - * be attached to a node managed by the querying node's supervisor. - * In particular note that x or y may be negative. - * - The speed of the memory controller. (This is a not-to-exceed value - * based on the raw hardware data rate, and may not be achievable in - * practice; it is provided to give clients information on the relative - * performance of the available controllers.) - * - * Clients should avoid calling this interface with invalid values. - * A client who does may be terminated. - * @param coord Tile for which to calculate the relative port position. - * @param controller Index of the controller; identical to value returned - * from other routines like hv_inquire_physical. - * @return Information about the controller. - */ -HV_MemoryControllerInfo hv_inquire_memory_controller(HV_Coord coord, - int controller); - - -/** A range of virtual memory. */ -typedef struct -{ - HV_VirtAddr start; /**< Starting address. */ - __hv64 size; /**< Size in bytes. */ -} HV_VirtAddrRange; - -/** Returns information about a range of virtual memory. - * - * hv_inquire_virtual() returns one of the ranges of client - * virtual addresses which are available to this client. - * - * The first range is retrieved by specifying an idx of 0, and - * successive ranges are returned with subsequent idx values. Ranges - * are ordered by increasing start address (i.e., as idx increases, - * so does start), do not overlap, and do not touch (i.e., the - * available memory is described with the fewest possible ranges). - * - * If an out-of-range idx value is specified, the returned size will be zero. - * A client can count the number of ranges by increasing idx until the - * returned size is zero. There will always be at least one valid range. - * - * Some clients may well have various virtual addresses hardwired - * into themselves; for instance, their instruction stream may - * have been compiled expecting to live at a particular address. - * Such clients should use this interface to verify they've been - * given the virtual address space they expect, and issue a (potentially - * fatal) warning message otherwise. - * - * Note that the returned size is a __hv64, not a __hv32, so it is - * possible to express a single range spanning the entire 32-bit - * address space. - */ -HV_VirtAddrRange hv_inquire_virtual(int idx); - - -/** A range of ASID values. */ -typedef struct -{ - HV_ASID start; /**< First ASID in the range. */ - unsigned int size; /**< Number of ASIDs. Zero for an invalid range. */ -} HV_ASIDRange; - -/** Returns information about a range of ASIDs. - * - * hv_inquire_asid() returns one of the ranges of address - * space identifiers which are available to this client. - * - * The first range is retrieved by specifying an idx of 0, and - * successive ranges are returned with subsequent idx values. Ranges - * are ordered by increasing start value (i.e., as idx increases, - * so does start), do not overlap, and do not touch (i.e., the - * available ASIDs are described with the fewest possible ranges). - * - * If an out-of-range idx value is specified, the returned size will be zero. - * A client can count the number of ranges by increasing idx until the - * returned size is zero. There will always be at least one valid range. - */ -HV_ASIDRange hv_inquire_asid(int idx); - - -/** Waits for at least the specified number of nanoseconds then returns. - * - * NOTE: this deprecated function currently assumes a 750 MHz clock, - * and is thus not generally suitable for use. New code should call - * hv_sysconf(HV_SYSCONF_CPU_SPEED), compute a cycle count to wait for, - * and delay by looping while checking the cycle counter SPR. - * - * @param nanosecs The number of nanoseconds to sleep. - */ -void hv_nanosleep(int nanosecs); - - -/** Reads a character from the console without blocking. - * - * @return A value from 0-255 indicates the value successfully read. - * A negative value means no value was ready. - */ -int hv_console_read_if_ready(void); - - -/** Writes a character to the console, blocking if the console is busy. - * - * This call cannot fail. If the console is broken for some reason, - * output will simply vanish. - * @param byte Character to write. - */ -void hv_console_putc(int byte); - - -/** Writes a string to the console, blocking if the console is busy. - * @param bytes Pointer to characters to write. - * @param len Number of characters to write. - * @return Number of characters written, or HV_EFAULT if the buffer is invalid. - */ -int hv_console_write(HV_VirtAddr bytes, int len); - - -/** Dispatch the next interrupt from the client downcall mechanism. - * - * The hypervisor uses downcalls to notify the client of asynchronous - * events. Some of these events are hypervisor-created (like incoming - * messages). Some are regular interrupts which initially occur in - * the hypervisor, and are normally handled directly by the client; - * when these occur in a client's interrupt critical section, they must - * be delivered through the downcall mechanism. - * - * A downcall is initially delivered to the client as an INTCTRL_CL - * interrupt, where CL is the client's PL. Upon entry to the INTCTRL_CL - * vector, the client must immediately invoke the hv_downcall_dispatch - * service. This service will not return; instead it will cause one of - * the client's actual downcall-handling interrupt vectors to be entered. - * The EX_CONTEXT registers in the client will be set so that when the - * client irets, it will return to the code which was interrupted by the - * INTCTRL_CL interrupt. - * - * Under some circumstances, the firing of INTCTRL_CL can race with - * the lowering of a device interrupt. In such a case, the - * hv_downcall_dispatch service may issue an iret instruction instead - * of entering one of the client's actual downcall-handling interrupt - * vectors. This will return execution to the location that was - * interrupted by INTCTRL_CL. - * - * Any saving of registers should be done by the actual handling - * vectors; no registers should be changed by the INTCTRL_CL handler. - * In particular, the client should not use a jal instruction to invoke - * the hv_downcall_dispatch service, as that would overwrite the client's - * lr register. Note that the hv_downcall_dispatch service may overwrite - * one or more of the client's system save registers. - * - * The client must not modify the INTCTRL_CL_STATUS SPR. The hypervisor - * will set this register to cause a downcall to happen, and will clear - * it when no further downcalls are pending. - * - * When a downcall vector is entered, the INTCTRL_CL interrupt will be - * masked. When the client is done processing a downcall, and is ready - * to accept another, it must unmask this interrupt; if more downcalls - * are pending, this will cause the INTCTRL_CL vector to be reentered. - * Currently the following interrupt vectors can be entered through a - * downcall: - * - * INT_MESSAGE_RCV_DWNCL (hypervisor message available) - * INT_DEV_INTR_DWNCL (device interrupt) - * INT_DMATLB_MISS_DWNCL (DMA TLB miss) - * INT_SNITLB_MISS_DWNCL (SNI TLB miss) - * INT_DMATLB_ACCESS_DWNCL (DMA TLB access violation) - */ -void hv_downcall_dispatch(void); - -#endif /* !__ASSEMBLER__ */ - -/** We use actual interrupt vectors which never occur (they're only there - * to allow setting MPLs for related SPRs) for our downcall vectors. - */ -/** Message receive downcall interrupt vector */ -#define INT_MESSAGE_RCV_DWNCL INT_BOOT_ACCESS -/** DMA TLB miss downcall interrupt vector */ -#define INT_DMATLB_MISS_DWNCL INT_DMA_ASID -/** Static nework processor instruction TLB miss interrupt vector */ -#define INT_SNITLB_MISS_DWNCL INT_SNI_ASID -/** DMA TLB access violation downcall interrupt vector */ -#define INT_DMATLB_ACCESS_DWNCL INT_DMA_CPL -/** Device interrupt downcall interrupt vector */ -#define INT_DEV_INTR_DWNCL INT_WORLD_ACCESS -/** NMI downcall interrupt vector */ -#define INT_NMI_DWNCL 64 - -#define HV_NMI_FLAG_FORCE 0x1 /**< Force an NMI downcall regardless of - the ICS bit of the client. */ - -#ifndef __ASSEMBLER__ - -/** Requests the inode for a specific full pathname. - * - * Performs a lookup in the hypervisor filesystem for a given filename. - * Multiple calls with the same filename will always return the same inode. - * If there is no such filename, HV_ENOENT is returned. - * A bad filename pointer may result in HV_EFAULT instead. - * - * @param filename Constant pointer to name of requested file - * @return Inode of requested file - */ -int hv_fs_findfile(HV_VirtAddr filename); - - -/** Data returned from an fstat request. - * Note that this structure should be no more than 40 bytes in size so - * that it can always be returned completely in registers. - */ -typedef struct -{ - int size; /**< Size of file (or HV_Errno on error) */ - unsigned int flags; /**< Flags (see HV_FS_FSTAT_FLAGS) */ -} HV_FS_StatInfo; - -/** Bitmask flags for fstat request */ -typedef enum -{ - HV_FS_ISDIR = 0x0001 /**< Is the entry a directory? */ -} HV_FS_FSTAT_FLAGS; - -/** Get stat information on a given file inode. - * - * Return information on the file with the given inode. - * - * IF the HV_FS_ISDIR bit is set, the "file" is a directory. Reading - * it will return NUL-separated filenames (no directory part) relative - * to the path to the inode of the directory "file". These can be - * appended to the path to the directory "file" after a forward slash - * to create additional filenames. Note that it is not required - * that all valid paths be decomposable into valid parent directories; - * a filesystem may validly have just a few files, none of which have - * HV_FS_ISDIR set. However, if clients may wish to enumerate the - * files in the filesystem, it is recommended to include all the - * appropriate parent directory "files" to give a consistent view. - * - * An invalid file inode will cause an HV_EBADF error to be returned. - * - * @param inode The inode number of the query - * @return An HV_FS_StatInfo structure - */ -HV_FS_StatInfo hv_fs_fstat(int inode); - - -/** Read data from a specific hypervisor file. - * On error, may return HV_EBADF for a bad inode or HV_EFAULT for a bad buf. - * Reads near the end of the file will return fewer bytes than requested. - * Reads at or beyond the end of a file will return zero. - * - * @param inode the hypervisor file to read - * @param buf the buffer to read data into - * @param length the number of bytes of data to read - * @param offset the offset into the file to read the data from - * @return number of bytes successfully read, or an HV_Errno code - */ -int hv_fs_pread(int inode, HV_VirtAddr buf, int length, int offset); - - -/** Read a 64-bit word from the specified physical address. - * The address must be 8-byte aligned. - * Specifying an invalid physical address will lead to client termination. - * @param addr The physical address to read - * @param access The PTE describing how to read the memory - * @return The 64-bit value read from the given address - */ -unsigned long long hv_physaddr_read64(HV_PhysAddr addr, HV_PTE access); - - -/** Write a 64-bit word to the specified physical address. - * The address must be 8-byte aligned. - * Specifying an invalid physical address will lead to client termination. - * @param addr The physical address to write - * @param access The PTE that says how to write the memory - * @param val The 64-bit value to write to the given address - */ -void hv_physaddr_write64(HV_PhysAddr addr, HV_PTE access, - unsigned long long val); - - -/** Get the value of the command-line for the supervisor, if any. - * This will not include the filename of the booted supervisor, but may - * include configured-in boot arguments or the hv_restart() arguments. - * If the buffer is not long enough the hypervisor will NUL the first - * character of the buffer but not write any other data. - * @param buf The virtual address to write the command-line string to. - * @param length The length of buf, in characters. - * @return The actual length of the command line, including the trailing NUL - * (may be larger than "length"). - */ -int hv_get_command_line(HV_VirtAddr buf, int length); - - -/** Set a new value for the command-line for the supervisor, which will - * be returned from subsequent invocations of hv_get_command_line() on - * this tile. - * @param buf The virtual address to read the command-line string from. - * @param length The length of buf, in characters; must be no more than - * HV_COMMAND_LINE_LEN. - * @return Zero if successful, or a hypervisor error code. - */ -HV_Errno hv_set_command_line(HV_VirtAddr buf, int length); - -/** Maximum size of a command line passed to hv_set_command_line(); note - * that a line returned from hv_get_command_line() could be larger than - * this.*/ -#define HV_COMMAND_LINE_LEN 256 - -/** Tell the hypervisor how to cache non-priority pages - * (its own as well as pages explicitly represented in page tables). - * Normally these will be represented as red/black pages, but - * when the supervisor starts to allocate "priority" pages in the PTE - * the hypervisor will need to start marking those pages as (e.g.) "red" - * and non-priority pages as either "black" (if they cache-alias - * with the existing priority pages) or "red/black" (if they don't). - * The bitmask provides information on which parts of the cache - * have been used for pinned pages so far on this tile; if (1 << N) - * appears in the bitmask, that indicates that a 4KB region of the - * cache starting at (N * 4KB) is in use by a "priority" page. - * The portion of cache used by a particular page can be computed - * by taking the page's PA, modulo CHIP_L2_CACHE_SIZE(), and setting - * all the "4KB" bits corresponding to the actual page size. - * @param bitmask A bitmap of priority page set values - */ -void hv_set_caching(unsigned long bitmask); - - -/** Zero out a specified number of pages. - * The va and size must both be multiples of 4096. - * Caches are bypassed and memory is directly set to zero. - * This API is implemented only in the magic hypervisor and is intended - * to provide a performance boost to the minimal supervisor by - * giving it a fast way to zero memory pages when allocating them. - * @param va Virtual address where the page has been mapped - * @param size Number of bytes (must be a page size multiple) - */ -void hv_bzero_page(HV_VirtAddr va, unsigned int size); - - -/** State object for the hypervisor messaging subsystem. */ -typedef struct -{ -#if CHIP_VA_WIDTH() > 32 - __hv64 opaque[2]; /**< No user-serviceable parts inside */ -#else - __hv32 opaque[2]; /**< No user-serviceable parts inside */ -#endif -} -HV_MsgState; - -/** Register to receive incoming messages. - * - * This routine configures the current tile so that it can receive - * incoming messages. It must be called before the client can receive - * messages with the hv_receive_message routine, and must be called on - * each tile which will receive messages. - * - * msgstate is the virtual address of a state object of type HV_MsgState. - * Once the state is registered, the client must not read or write the - * state object; doing so will cause undefined results. - * - * If this routine is called with msgstate set to 0, the client's message - * state will be freed and it will no longer be able to receive messages. - * Note that this may cause the loss of any as-yet-undelivered messages - * for the client. - * - * If another client attempts to send a message to a client which has - * not yet called hv_register_message_state, or which has freed its - * message state, the message will not be delivered, as if the client - * had insufficient buffering. - * - * This routine returns HV_OK if the registration was successful, and - * HV_EINVAL if the supplied state object is unsuitable. Note that some - * errors may not be detected during this routine, but might be detected - * during a subsequent message delivery. - * @param msgstate State object. - **/ -HV_Errno hv_register_message_state(HV_MsgState* msgstate); - -/** Possible message recipient states. */ -typedef enum -{ - HV_TO_BE_SENT, /**< Not sent (not attempted, or recipient not ready) */ - HV_SENT, /**< Successfully sent */ - HV_BAD_RECIP /**< Bad recipient coordinates (permanent error) */ -} HV_Recip_State; - -/** Message recipient. */ -typedef struct -{ - /** X coordinate, relative to supervisor's top-left coordinate */ - unsigned int x:11; - - /** Y coordinate, relative to supervisor's top-left coordinate */ - unsigned int y:11; - - /** Status of this recipient */ - HV_Recip_State state:10; -} HV_Recipient; - -/** Send a message to a set of recipients. - * - * This routine sends a message to a set of recipients. - * - * recips is an array of HV_Recipient structures. Each specifies a tile, - * and a message state; initially, it is expected that the state will - * be set to HV_TO_BE_SENT. nrecip specifies the number of recipients - * in the recips array. - * - * For each recipient whose state is HV_TO_BE_SENT, the hypervisor attempts - * to send that tile the specified message. In order to successfully - * receive the message, the receiver must be a valid tile to which the - * sender has access, must not be the sending tile itself, and must have - * sufficient free buffer space. (The hypervisor guarantees that each - * tile which has called hv_register_message_state() will be able to - * buffer one message from every other tile which can legally send to it; - * more space may be provided but is not guaranteed.) If an invalid tile - * is specified, the recipient's state is set to HV_BAD_RECIP; this is a - * permanent delivery error. If the message is successfully delivered - * to the recipient's buffer, the recipient's state is set to HV_SENT. - * Otherwise, the recipient's state is unchanged. Message delivery is - * synchronous; all attempts to send messages are completed before this - * routine returns. - * - * If no permanent delivery errors were encountered, the routine returns - * the number of messages successfully sent: that is, the number of - * recipients whose states changed from HV_TO_BE_SENT to HV_SENT during - * this operation. If any permanent delivery errors were encountered, - * the routine returns HV_ERECIP. In the event of permanent delivery - * errors, it may be the case that delivery was not attempted to all - * recipients; if any messages were successfully delivered, however, - * recipients' state values will be updated appropriately. - * - * It is explicitly legal to specify a recipient structure whose state - * is not HV_TO_BE_SENT; such a recipient is ignored. One suggested way - * of using hv_send_message to send a message to multiple tiles is to set - * up a list of recipients, and then call the routine repeatedly with the - * same list, each time accumulating the number of messages successfully - * sent, until all messages are sent, a permanent error is encountered, - * or the desired number of attempts have been made. When used in this - * way, the routine will deliver each message no more than once to each - * recipient. - * - * Note that a message being successfully delivered to the recipient's - * buffer space does not guarantee that it is received by the recipient, - * either immediately or at any time in the future; the recipient might - * never call hv_receive_message, or could register a different state - * buffer, losing the message. - * - * Specifying the same recipient more than once in the recipient list - * is an error, which will not result in an error return but which may - * or may not result in more than one message being delivered to the - * recipient tile. - * - * buf and buflen specify the message to be sent. buf is a virtual address - * which must be currently mapped in the client's page table; if not, the - * routine returns HV_EFAULT. buflen must be greater than zero and less - * than or equal to HV_MAX_MESSAGE_SIZE, and nrecip must be less than the - * number of tiles to which the sender has access; if not, the routine - * returns HV_EINVAL. - * @param recips List of recipients. - * @param nrecip Number of recipients. - * @param buf Address of message data. - * @param buflen Length of message data. - **/ -int hv_send_message(HV_Recipient *recips, int nrecip, - HV_VirtAddr buf, int buflen); - -/** Maximum hypervisor message size, in bytes */ -#define HV_MAX_MESSAGE_SIZE 28 - - -/** Return value from hv_receive_message() */ -typedef struct -{ - int msglen; /**< Message length in bytes, or an error code */ - __hv32 source; /**< Code identifying message sender (HV_MSG_xxx) */ -} HV_RcvMsgInfo; - -#define HV_MSG_TILE 0x0 /**< Message source is another tile */ -#define HV_MSG_INTR 0x1 /**< Message source is a driver interrupt */ - -/** Receive a message. - * - * This routine retrieves a message from the client's incoming message - * buffer. - * - * Multiple messages sent from a particular sending tile to a particular - * receiving tile are received in the order that they were sent; however, - * no ordering is guaranteed between messages sent by different tiles. - * - * Whenever the a client's message buffer is empty, the first message - * subsequently received will cause the client's MESSAGE_RCV_DWNCL - * interrupt vector to be invoked through the interrupt downcall mechanism - * (see the description of the hv_downcall_dispatch() routine for details - * on downcalls). - * - * Another message-available downcall will not occur until a call to - * this routine is made when the message buffer is empty, and a message - * subsequently arrives. Note that such a downcall could occur while - * this routine is executing. If the calling code does not wish this - * to happen, it is recommended that this routine be called with the - * INTCTRL_1 interrupt masked, or inside an interrupt critical section. - * - * msgstate is the value previously passed to hv_register_message_state(). - * buf is the virtual address of the buffer into which the message will - * be written; buflen is the length of the buffer. - * - * This routine returns an HV_RcvMsgInfo structure. The msglen member - * of that structure is the length of the message received, zero if no - * message is available, or HV_E2BIG if the message is too large for the - * specified buffer. If the message is too large, it is not consumed, - * and may be retrieved by a subsequent call to this routine specifying - * a sufficiently large buffer. A buffer which is HV_MAX_MESSAGE_SIZE - * bytes long is guaranteed to be able to receive any possible message. - * - * The source member of the HV_RcvMsgInfo structure describes the sender - * of the message. For messages sent by another client tile via an - * hv_send_message() call, this value is HV_MSG_TILE; for messages sent - * as a result of a device interrupt, this value is HV_MSG_INTR. - */ - -HV_RcvMsgInfo hv_receive_message(HV_MsgState msgstate, HV_VirtAddr buf, - int buflen); - - -/** Start remaining tiles owned by this supervisor. Initially, only one tile - * executes the client program; after it calls this service, the other tiles - * are started. This allows the initial tile to do one-time configuration - * of shared data structures without having to lock them against simultaneous - * access. - */ -void hv_start_all_tiles(void); - - -/** Open a hypervisor device. - * - * This service initializes an I/O device and its hypervisor driver software, - * and makes it available for use. The open operation is per-device per-chip; - * once it has been performed, the device handle returned may be used in other - * device services calls made by any tile. - * - * @param name Name of the device. A base device name is just a text string - * (say, "pcie"). If there is more than one instance of a device, the - * base name is followed by a slash and a device number (say, "pcie/0"). - * Some devices may support further structure beneath those components; - * most notably, devices which require control operations do so by - * supporting reads and/or writes to a control device whose name - * includes a trailing "/ctl" (say, "pcie/0/ctl"). - * @param flags Flags (HV_DEV_xxx). - * @return A positive integer device handle, or a negative error code. - */ -int hv_dev_open(HV_VirtAddr name, __hv32 flags); - - -/** Close a hypervisor device. - * - * This service uninitializes an I/O device and its hypervisor driver - * software, and makes it unavailable for use. The close operation is - * per-device per-chip; once it has been performed, the device is no longer - * available. Normally there is no need to ever call the close service. - * - * @param devhdl Device handle of the device to be closed. - * @return Zero if the close is successful, otherwise, a negative error code. - */ -int hv_dev_close(int devhdl); - - -/** Read data from a hypervisor device synchronously. - * - * This service transfers data from a hypervisor device to a memory buffer. - * When the service returns, the data has been written from the memory buffer, - * and the buffer will not be further modified by the driver. - * - * No ordering is guaranteed between requests issued from different tiles. - * - * Devices may choose to support both the synchronous and asynchronous read - * operations, only one of them, or neither of them. - * - * @param devhdl Device handle of the device to be read from. - * @param flags Flags (HV_DEV_xxx). - * @param va Virtual address of the target data buffer. This buffer must - * be mapped in the currently installed page table; if not, HV_EFAULT - * may be returned. - * @param len Number of bytes to be transferred. - * @param offset Driver-dependent offset. For a random-access device, this is - * often a byte offset from the beginning of the device; in other cases, - * like on a control device, it may have a different meaning. - * @return A non-negative value if the read was at least partially successful; - * otherwise, a negative error code. The precise interpretation of - * the return value is driver-dependent, but many drivers will return - * the number of bytes successfully transferred. - */ -int hv_dev_pread(int devhdl, __hv32 flags, HV_VirtAddr va, __hv32 len, - __hv64 offset); - -#define HV_DEV_NB_EMPTY 0x1 /**< Don't block when no bytes of data can - be transferred. */ -#define HV_DEV_NB_PARTIAL 0x2 /**< Don't block when some bytes, but not all - of the requested bytes, can be - transferred. */ -#define HV_DEV_NOCACHE 0x4 /**< The caller warrants that none of the - cache lines which might contain data - from the requested buffer are valid. - Useful with asynchronous operations - only. */ - -#define HV_DEV_ALLFLAGS (HV_DEV_NB_EMPTY | HV_DEV_NB_PARTIAL | \ - HV_DEV_NOCACHE) /**< All HV_DEV_xxx flags */ - -/** Write data to a hypervisor device synchronously. - * - * This service transfers data from a memory buffer to a hypervisor device. - * When the service returns, the data has been read from the memory buffer, - * and the buffer may be overwritten by the client; the data may not - * necessarily have been conveyed to the actual hardware I/O interface. - * - * No ordering is guaranteed between requests issued from different tiles. - * - * Devices may choose to support both the synchronous and asynchronous write - * operations, only one of them, or neither of them. - * - * @param devhdl Device handle of the device to be written to. - * @param flags Flags (HV_DEV_xxx). - * @param va Virtual address of the source data buffer. This buffer must - * be mapped in the currently installed page table; if not, HV_EFAULT - * may be returned. - * @param len Number of bytes to be transferred. - * @param offset Driver-dependent offset. For a random-access device, this is - * often a byte offset from the beginning of the device; in other cases, - * like on a control device, it may have a different meaning. - * @return A non-negative value if the write was at least partially successful; - * otherwise, a negative error code. The precise interpretation of - * the return value is driver-dependent, but many drivers will return - * the number of bytes successfully transferred. - */ -int hv_dev_pwrite(int devhdl, __hv32 flags, HV_VirtAddr va, __hv32 len, - __hv64 offset); - - -/** Interrupt arguments, used in the asynchronous I/O interfaces. */ -#if CHIP_VA_WIDTH() > 32 -typedef __hv64 HV_IntArg; -#else -typedef __hv32 HV_IntArg; -#endif - -/** Interrupt messages are delivered via the mechanism as normal messages, - * but have a message source of HV_DEV_INTR. The message is formatted - * as an HV_IntrMsg structure. - */ - -typedef struct -{ - HV_IntArg intarg; /**< Interrupt argument, passed to the poll/preada/pwritea - services */ - HV_IntArg intdata; /**< Interrupt-specific interrupt data */ -} HV_IntrMsg; - -/** Request an interrupt message when a device condition is satisfied. - * - * This service requests that an interrupt message be delivered to the - * requesting tile when a device becomes readable or writable, or when any - * data queued to the device via previous write operations from this tile - * has been actually sent out on the hardware I/O interface. Devices may - * choose to support any, all, or none of the available conditions. - * - * If multiple conditions are specified, only one message will be - * delivered. If the event mask delivered to that interrupt handler - * indicates that some of the conditions have not yet occurred, the - * client must issue another poll() call if it wishes to wait for those - * conditions. - * - * Only one poll may be outstanding per device handle per tile. If more than - * one tile is polling on the same device and condition, they will all be - * notified when it happens. Because of this, clients may not assume that - * the condition signaled is necessarily still true when they request a - * subsequent service; for instance, the readable data which caused the - * poll call to interrupt may have been read by another tile in the interim. - * - * The notification interrupt message could come directly, or via the - * downcall (intctrl1) method, depending on what the tile is doing - * when the condition is satisfied. Note that it is possible for the - * requested interrupt to be delivered after this service is called but - * before it returns. - * - * @param devhdl Device handle of the device to be polled. - * @param events Flags denoting the events which will cause the interrupt to - * be delivered (HV_DEVPOLL_xxx). - * @param intarg Value which will be delivered as the intarg member of the - * eventual interrupt message; the intdata member will be set to a - * mask of HV_DEVPOLL_xxx values indicating which conditions have been - * satisifed. - * @return Zero if the interrupt was successfully scheduled; otherwise, a - * negative error code. - */ -int hv_dev_poll(int devhdl, __hv32 events, HV_IntArg intarg); - -#define HV_DEVPOLL_READ 0x1 /**< Test device for readability */ -#define HV_DEVPOLL_WRITE 0x2 /**< Test device for writability */ -#define HV_DEVPOLL_FLUSH 0x4 /**< Test device for output drained */ - - -/** Cancel a request for an interrupt when a device event occurs. - * - * This service requests that no interrupt be delivered when the events - * noted in the last-issued poll() call happen. Once this service returns, - * the interrupt has been canceled; however, it is possible for the interrupt - * to be delivered after this service is called but before it returns. - * - * @param devhdl Device handle of the device on which to cancel polling. - * @return Zero if the poll was successfully canceled; otherwise, a negative - * error code. - */ -int hv_dev_poll_cancel(int devhdl); - - -/** NMI information */ -typedef struct -{ - /** Result: negative error, or HV_NMI_RESULT_xxx. */ - int result; - - /** PC from interrupted remote core (if result != HV_NMI_RESULT_FAIL_HV). */ - HV_VirtAddr pc; - -} HV_NMI_Info; - -/** NMI issued successfully. */ -#define HV_NMI_RESULT_OK 0 - -/** NMI not issued: remote tile running at client PL with ICS set. */ -#define HV_NMI_RESULT_FAIL_ICS 1 - -/** NMI not issued: remote tile waiting in hypervisor. */ -#define HV_NMI_RESULT_FAIL_HV 2 - -/** Force an NMI downcall regardless of the ICS bit of the client. */ -#define HV_NMI_FLAG_FORCE 0x1 - -/** Send an NMI interrupt request to a particular tile. - * - * This will cause the NMI to be issued on the remote tile regardless - * of the state of the client interrupt mask. However, if the remote - * tile is in the hypervisor, it will not execute the NMI, and - * HV_NMI_RESULT_FAIL_HV will be returned. Similarly, if the remote - * tile is in a client interrupt critical section at the time of the - * NMI, it will not execute the NMI, and HV_NMI_RESULT_FAIL_ICS will - * be returned. In this second case, however, if HV_NMI_FLAG_FORCE - * is set in flags, then the remote tile will enter its NMI interrupt - * vector regardless. Forcing the NMI vector during an interrupt - * critical section will mean that the client can not safely continue - * execution after handling the interrupt. - * - * @param tile Tile to which the NMI request is sent. - * @param info NMI information which is defined by and interpreted by the - * supervisor, is passed to the specified tile, and is - * stored in the SPR register SYSTEM_SAVE_{CLIENT_PL}_2 on the - * specified tile when entering the NMI handler routine. - * Typically, this parameter stores the NMI type, or an aligned - * VA plus some special bits, etc. - * @param flags Flags (HV_NMI_FLAG_xxx). - * @return Information about the requested NMI. - */ -HV_NMI_Info hv_send_nmi(HV_Coord tile, unsigned long info, __hv64 flags); - - -/** Scatter-gather list for preada/pwritea calls. */ -typedef struct -#if CHIP_VA_WIDTH() <= 32 -__attribute__ ((packed, aligned(4))) -#endif -{ - HV_PhysAddr pa; /**< Client physical address of the buffer segment. */ - HV_PTE pte; /**< Page table entry describing the caching and location - override characteristics of the buffer segment. Some - drivers ignore this element and will require that - the NOCACHE flag be set on their requests. */ - __hv32 len; /**< Length of the buffer segment. */ -} HV_SGL; - -#define HV_SGL_MAXLEN 16 /**< Maximum number of entries in a scatter-gather - list */ - -/** Read data from a hypervisor device asynchronously. - * - * This service transfers data from a hypervisor device to a memory buffer. - * When the service returns, the read has been scheduled. When the read - * completes, an interrupt message will be delivered, and the buffer will - * not be further modified by the driver. - * - * The number of possible outstanding asynchronous requests is defined by - * each driver, but it is recommended that it be at least two requests - * per tile per device. - * - * No ordering is guaranteed between synchronous and asynchronous requests, - * even those issued on the same tile. - * - * The completion interrupt message could come directly, or via the downcall - * (intctrl1) method, depending on what the tile is doing when the read - * completes. Interrupts do not coalesce; one is delivered for each - * asynchronous I/O request. Note that it is possible for the requested - * interrupt to be delivered after this service is called but before it - * returns. - * - * Devices may choose to support both the synchronous and asynchronous read - * operations, only one of them, or neither of them. - * - * @param devhdl Device handle of the device to be read from. - * @param flags Flags (HV_DEV_xxx). - * @param sgl_len Number of elements in the scatter-gather list. - * @param sgl Scatter-gather list describing the memory to which data will be - * written. - * @param offset Driver-dependent offset. For a random-access device, this is - * often a byte offset from the beginning of the device; in other cases, - * like on a control device, it may have a different meaning. - * @param intarg Value which will be delivered as the intarg member of the - * eventual interrupt message; the intdata member will be set to the - * normal return value from the read request. - * @return Zero if the read was successfully scheduled; otherwise, a negative - * error code. Note that some drivers may choose to pre-validate - * their arguments, and may thus detect certain device error - * conditions at this time rather than when the completion notification - * occurs, but this is not required. - */ -int hv_dev_preada(int devhdl, __hv32 flags, __hv32 sgl_len, - HV_SGL sgl[/* sgl_len */], __hv64 offset, HV_IntArg intarg); - - -/** Write data to a hypervisor device asynchronously. - * - * This service transfers data from a memory buffer to a hypervisor - * device. When the service returns, the write has been scheduled. - * When the write completes, an interrupt message will be delivered, - * and the buffer may be overwritten by the client; the data may not - * necessarily have been conveyed to the actual hardware I/O interface. - * - * The number of possible outstanding asynchronous requests is defined by - * each driver, but it is recommended that it be at least two requests - * per tile per device. - * - * No ordering is guaranteed between synchronous and asynchronous requests, - * even those issued on the same tile. - * - * The completion interrupt message could come directly, or via the downcall - * (intctrl1) method, depending on what the tile is doing when the read - * completes. Interrupts do not coalesce; one is delivered for each - * asynchronous I/O request. Note that it is possible for the requested - * interrupt to be delivered after this service is called but before it - * returns. - * - * Devices may choose to support both the synchronous and asynchronous write - * operations, only one of them, or neither of them. - * - * @param devhdl Device handle of the device to be read from. - * @param flags Flags (HV_DEV_xxx). - * @param sgl_len Number of elements in the scatter-gather list. - * @param sgl Scatter-gather list describing the memory from which data will be - * read. - * @param offset Driver-dependent offset. For a random-access device, this is - * often a byte offset from the beginning of the device; in other cases, - * like on a control device, it may have a different meaning. - * @param intarg Value which will be delivered as the intarg member of the - * eventual interrupt message; the intdata member will be set to the - * normal return value from the write request. - * @return Zero if the write was successfully scheduled; otherwise, a negative - * error code. Note that some drivers may choose to pre-validate - * their arguments, and may thus detect certain device error - * conditions at this time rather than when the completion notification - * occurs, but this is not required. - */ -int hv_dev_pwritea(int devhdl, __hv32 flags, __hv32 sgl_len, - HV_SGL sgl[/* sgl_len */], __hv64 offset, HV_IntArg intarg); - - -/** Define a pair of tile and ASID to identify a user process context. */ -typedef struct -{ - /** X coordinate, relative to supervisor's top-left coordinate */ - unsigned int x:11; - - /** Y coordinate, relative to supervisor's top-left coordinate */ - unsigned int y:11; - - /** ASID of the process on this x,y tile */ - HV_ASID asid:10; -} HV_Remote_ASID; - -/** Flush cache and/or TLB state on remote tiles. - * - * @param cache_pa Client physical address to flush from cache (ignored if - * the length encoded in cache_control is zero, or if - * HV_FLUSH_EVICT_L2 is set, or if cache_cpumask is NULL). - * @param cache_control This argument allows you to specify a length of - * physical address space to flush (maximum HV_FLUSH_MAX_CACHE_LEN). - * You can "or" in HV_FLUSH_EVICT_L2 to flush the whole L2 cache. - * You can "or" in HV_FLUSH_EVICT_L1I to flush the whole L1I cache. - * HV_FLUSH_ALL flushes all caches. - * @param cache_cpumask Bitmask (in row-major order, supervisor-relative) of - * tile indices to perform cache flush on. The low bit of the first - * word corresponds to the tile at the upper left-hand corner of the - * supervisor's rectangle. If passed as a NULL pointer, equivalent - * to an empty bitmask. On chips which support hash-for-home caching, - * if passed as -1, equivalent to a mask containing tiles which could - * be doing hash-for-home caching. - * @param tlb_va Virtual address to flush from TLB (ignored if - * tlb_length is zero or tlb_cpumask is NULL). - * @param tlb_length Number of bytes of data to flush from the TLB. - * @param tlb_pgsize Page size to use for TLB flushes. - * tlb_va and tlb_length need not be aligned to this size. - * @param tlb_cpumask Bitmask for tlb flush, like cache_cpumask. - * If passed as a NULL pointer, equivalent to an empty bitmask. - * @param asids Pointer to an HV_Remote_ASID array of tile/ASID pairs to flush. - * @param asidcount Number of HV_Remote_ASID entries in asids[]. - * @return Zero for success, or else HV_EINVAL or HV_EFAULT for errors that - * are detected while parsing the arguments. - */ -int hv_flush_remote(HV_PhysAddr cache_pa, unsigned long cache_control, - unsigned long* cache_cpumask, - HV_VirtAddr tlb_va, unsigned long tlb_length, - unsigned long tlb_pgsize, unsigned long* tlb_cpumask, - HV_Remote_ASID* asids, int asidcount); - -/** Include in cache_control to ensure a flush of the entire L2. */ -#define HV_FLUSH_EVICT_L2 (1UL << 31) - -/** Include in cache_control to ensure a flush of the entire L1I. */ -#define HV_FLUSH_EVICT_L1I (1UL << 30) - -/** Maximum legal size to use for the "length" component of cache_control. */ -#define HV_FLUSH_MAX_CACHE_LEN ((1UL << 30) - 1) - -/** Use for cache_control to ensure a flush of all caches. */ -#define HV_FLUSH_ALL -1UL - -#else /* __ASSEMBLER__ */ - -/** Include in cache_control to ensure a flush of the entire L2. */ -#define HV_FLUSH_EVICT_L2 (1 << 31) - -/** Include in cache_control to ensure a flush of the entire L1I. */ -#define HV_FLUSH_EVICT_L1I (1 << 30) - -/** Maximum legal size to use for the "length" component of cache_control. */ -#define HV_FLUSH_MAX_CACHE_LEN ((1 << 30) - 1) - -/** Use for cache_control to ensure a flush of all caches. */ -#define HV_FLUSH_ALL -1 - -#endif /* __ASSEMBLER__ */ - -#ifndef __ASSEMBLER__ - -/** Return a 64-bit value corresponding to the PTE if needed */ -#define hv_pte_val(pte) ((pte).val) - -/** Cast a 64-bit value to an HV_PTE */ -#define hv_pte(val) ((HV_PTE) { val }) - -#endif /* !__ASSEMBLER__ */ - - -/** Bits in the size of an HV_PTE */ -#define HV_LOG2_PTE_SIZE 3 - -/** Size of an HV_PTE */ -#define HV_PTE_SIZE (1 << HV_LOG2_PTE_SIZE) - - -/* Bits in HV_PTE's low word. */ -#define HV_PTE_INDEX_PRESENT 0 /**< PTE is valid */ -#define HV_PTE_INDEX_MIGRATING 1 /**< Page is migrating */ -#define HV_PTE_INDEX_CLIENT0 2 /**< Page client state 0 */ -#define HV_PTE_INDEX_CLIENT1 3 /**< Page client state 1 */ -#define HV_PTE_INDEX_NC 4 /**< L1$/L2$ incoherent with L3$ */ -#define HV_PTE_INDEX_NO_ALLOC_L1 5 /**< Page is uncached in local L1$ */ -#define HV_PTE_INDEX_NO_ALLOC_L2 6 /**< Page is uncached in local L2$ */ -#define HV_PTE_INDEX_CACHED_PRIORITY 7 /**< Page is priority cached */ -#define HV_PTE_INDEX_PAGE 8 /**< PTE describes a page */ -#define HV_PTE_INDEX_GLOBAL 9 /**< Page is global */ -#define HV_PTE_INDEX_USER 10 /**< Page is user-accessible */ -#define HV_PTE_INDEX_ACCESSED 11 /**< Page has been accessed */ -#define HV_PTE_INDEX_DIRTY 12 /**< Page has been written */ - /* Bits 13-14 are reserved for - future use. */ -#define HV_PTE_INDEX_SUPER 15 /**< Pages ganged together for TLB */ -#define HV_PTE_INDEX_MODE 16 /**< Page mode; see HV_PTE_MODE_xxx */ -#define HV_PTE_MODE_BITS 3 /**< Number of bits in mode */ -#define HV_PTE_INDEX_CLIENT2 19 /**< Page client state 2 */ -#define HV_PTE_INDEX_LOTAR 20 /**< Page's LOTAR; must be high bits - of word */ -#define HV_PTE_LOTAR_BITS 12 /**< Number of bits in a LOTAR */ - -/* Bits in HV_PTE's high word. */ -#define HV_PTE_INDEX_READABLE 32 /**< Page is readable */ -#define HV_PTE_INDEX_WRITABLE 33 /**< Page is writable */ -#define HV_PTE_INDEX_EXECUTABLE 34 /**< Page is executable */ -#define HV_PTE_INDEX_PTFN 35 /**< Page's PTFN; must be high bits - of word */ -#define HV_PTE_PTFN_BITS 29 /**< Number of bits in a PTFN */ - -/* - * Legal values for the PTE's mode field - */ -/** Data is not resident in any caches; loads and stores access memory - * directly. - */ -#define HV_PTE_MODE_UNCACHED 1 - -/** Data is resident in the tile's local L1 and/or L2 caches; if a load - * or store misses there, it goes to memory. - * - * The copy in the local L1$/L2$ is not invalidated when the copy in - * memory is changed. - */ -#define HV_PTE_MODE_CACHE_NO_L3 2 - -/** Data is resident in the tile's local L1 and/or L2 caches. If a load - * or store misses there, it goes to an L3 cache in a designated tile; - * if it misses there, it goes to memory. - * - * If the NC bit is not set, the copy in the local L1$/L2$ is invalidated - * when the copy in the remote L3$ is changed. Otherwise, such - * invalidation will not occur. - * - * Chips for which CHIP_HAS_COHERENT_LOCAL_CACHE() is 0 do not support - * invalidation from an L3$ to another tile's L1$/L2$. If the NC bit is - * clear on such a chip, no copy is kept in the local L1$/L2$ in this mode. - */ -#define HV_PTE_MODE_CACHE_TILE_L3 3 - -/** Data is resident in the tile's local L1 and/or L2 caches. If a load - * or store misses there, it goes to an L3 cache in one of a set of - * designated tiles; if it misses there, it goes to memory. Which tile - * is chosen from the set depends upon a hash function applied to the - * physical address. This mode is not supported on chips for which - * CHIP_HAS_CBOX_HOME_MAP() is 0. - * - * If the NC bit is not set, the copy in the local L1$/L2$ is invalidated - * when the copy in the remote L3$ is changed. Otherwise, such - * invalidation will not occur. - * - * Chips for which CHIP_HAS_COHERENT_LOCAL_CACHE() is 0 do not support - * invalidation from an L3$ to another tile's L1$/L2$. If the NC bit is - * clear on such a chip, no copy is kept in the local L1$/L2$ in this mode. - */ -#define HV_PTE_MODE_CACHE_HASH_L3 4 - -/** Data is not resident in memory; accesses are instead made to an I/O - * device, whose tile coordinates are given by the PTE's LOTAR field. - * This mode is only supported on chips for which CHIP_HAS_MMIO() is 1. - * The EXECUTABLE bit may not be set in an MMIO PTE. - */ -#define HV_PTE_MODE_MMIO 5 - - -/* C wants 1ULL so it is typed as __hv64, but the assembler needs just numbers. - * The assembler can't handle shifts greater than 31, but treats them - * as shifts mod 32, so assembler code must be aware of which word - * the bit belongs in when using these macros. - */ -#ifdef __ASSEMBLER__ -#define __HV_PTE_ONE 1 /**< One, for assembler */ -#else -#define __HV_PTE_ONE 1ULL /**< One, for C */ -#endif - -/** Is this PTE present? - * - * If this bit is set, this PTE represents a valid translation or level-2 - * page table pointer. Otherwise, the page table does not contain a - * translation for the subject virtual pages. - * - * If this bit is not set, the other bits in the PTE are not - * interpreted by the hypervisor, and may contain any value. - */ -#define HV_PTE_PRESENT (__HV_PTE_ONE << HV_PTE_INDEX_PRESENT) - -/** Does this PTE map a page? - * - * If this bit is set in a level-0 page table, the entry should be - * interpreted as a level-2 page table entry mapping a jumbo page. - * - * If this bit is set in a level-1 page table, the entry should be - * interpreted as a level-2 page table entry mapping a large page. - * - * This bit should not be modified by the client while PRESENT is set, as - * doing so may race with the hypervisor's update of ACCESSED and DIRTY bits. - * - * In a level-2 page table, this bit is ignored and must be zero. - */ -#define HV_PTE_PAGE (__HV_PTE_ONE << HV_PTE_INDEX_PAGE) - -/** Does this PTE implicitly reference multiple pages? - * - * If this bit is set in the page table (either in the level-2 page table, - * or in a higher level page table in conjunction with the PAGE bit) - * then the PTE specifies a range of contiguous pages, not a single page. - * The hv_set_pte_super_shift() allows you to specify the count for - * each level of the page table. - * - * Note: this bit is not supported on TILEPro systems. - */ -#define HV_PTE_SUPER (__HV_PTE_ONE << HV_PTE_INDEX_SUPER) - -/** Is this a global (non-ASID) mapping? - * - * If this bit is set, the translations established by this PTE will - * not be flushed from the TLB by the hv_flush_asid() service; they - * will be flushed by the hv_flush_page() or hv_flush_pages() services. - * - * Setting this bit for translations which are identical in all page - * tables (for instance, code and data belonging to a client OS) can - * be very beneficial, as it will reduce the number of TLB misses. - * Note that, while it is not an error which will be detected by the - * hypervisor, it is an extremely bad idea to set this bit for - * translations which are _not_ identical in all page tables. - * - * This bit should not be modified by the client while PRESENT is set, as - * doing so may race with the hypervisor's update of ACCESSED and DIRTY bits. - * - * This bit is ignored in level-1 PTEs unless the Page bit is set. - */ -#define HV_PTE_GLOBAL (__HV_PTE_ONE << HV_PTE_INDEX_GLOBAL) - -/** Is this mapping accessible to users? - * - * If this bit is set, code running at any PL will be permitted to - * access the virtual addresses mapped by this PTE. Otherwise, only - * code running at PL 1 or above will be allowed to do so. - * - * This bit should not be modified by the client while PRESENT is set, as - * doing so may race with the hypervisor's update of ACCESSED and DIRTY bits. - * - * This bit is ignored in level-1 PTEs unless the Page bit is set. - */ -#define HV_PTE_USER (__HV_PTE_ONE << HV_PTE_INDEX_USER) - -/** Has this mapping been accessed? - * - * This bit is set by the hypervisor when the memory described by the - * translation is accessed for the first time. It is never cleared by - * the hypervisor, but may be cleared by the client. After the bit - * has been cleared, subsequent references are not guaranteed to set - * it again until the translation has been flushed from the TLB. - * - * This bit is ignored in level-1 PTEs unless the Page bit is set. - */ -#define HV_PTE_ACCESSED (__HV_PTE_ONE << HV_PTE_INDEX_ACCESSED) - -/** Is this mapping dirty? - * - * This bit is set by the hypervisor when the memory described by the - * translation is written for the first time. It is never cleared by - * the hypervisor, but may be cleared by the client. After the bit - * has been cleared, subsequent references are not guaranteed to set - * it again until the translation has been flushed from the TLB. - * - * This bit is ignored in level-1 PTEs unless the Page bit is set. - */ -#define HV_PTE_DIRTY (__HV_PTE_ONE << HV_PTE_INDEX_DIRTY) - -/** Migrating bit in PTE. - * - * This bit is guaranteed not to be inspected or modified by the - * hypervisor. The name is indicative of the suggested use by the client - * to tag pages whose L3 cache is being migrated from one cpu to another. - */ -#define HV_PTE_MIGRATING (__HV_PTE_ONE << HV_PTE_INDEX_MIGRATING) - -/** Client-private bit in PTE. - * - * This bit is guaranteed not to be inspected or modified by the - * hypervisor. - */ -#define HV_PTE_CLIENT0 (__HV_PTE_ONE << HV_PTE_INDEX_CLIENT0) - -/** Client-private bit in PTE. - * - * This bit is guaranteed not to be inspected or modified by the - * hypervisor. - */ -#define HV_PTE_CLIENT1 (__HV_PTE_ONE << HV_PTE_INDEX_CLIENT1) - -/** Client-private bit in PTE. - * - * This bit is guaranteed not to be inspected or modified by the - * hypervisor. - */ -#define HV_PTE_CLIENT2 (__HV_PTE_ONE << HV_PTE_INDEX_CLIENT2) - -/** Non-coherent (NC) bit in PTE. - * - * If this bit is set, the mapping that is set up will be non-coherent - * (also known as non-inclusive). This means that changes to the L3 - * cache will not cause a local copy to be invalidated. It is generally - * recommended only for read-only mappings. - * - * In level-1 PTEs, if the Page bit is clear, this bit determines how the - * level-2 page table is accessed. - */ -#define HV_PTE_NC (__HV_PTE_ONE << HV_PTE_INDEX_NC) - -/** Is this page prevented from filling the L1$? - * - * If this bit is set, the page described by the PTE will not be cached - * the local cpu's L1 cache. - * - * If CHIP_HAS_NC_AND_NOALLOC_BITS() is not true in <chip.h> for this chip, - * it is illegal to use this attribute, and may cause client termination. - * - * In level-1 PTEs, if the Page bit is clear, this bit - * determines how the level-2 page table is accessed. - */ -#define HV_PTE_NO_ALLOC_L1 (__HV_PTE_ONE << HV_PTE_INDEX_NO_ALLOC_L1) - -/** Is this page prevented from filling the L2$? - * - * If this bit is set, the page described by the PTE will not be cached - * the local cpu's L2 cache. - * - * If CHIP_HAS_NC_AND_NOALLOC_BITS() is not true in <chip.h> for this chip, - * it is illegal to use this attribute, and may cause client termination. - * - * In level-1 PTEs, if the Page bit is clear, this bit determines how the - * level-2 page table is accessed. - */ -#define HV_PTE_NO_ALLOC_L2 (__HV_PTE_ONE << HV_PTE_INDEX_NO_ALLOC_L2) - -/** Is this a priority page? - * - * If this bit is set, the page described by the PTE will be given - * priority in the cache. Normally this translates into allowing the - * page to use only the "red" half of the cache. The client may wish to - * then use the hv_set_caching service to specify that other pages which - * alias this page will use only the "black" half of the cache. - * - * If the Cached Priority bit is clear, the hypervisor uses the - * current hv_set_caching() value to choose how to cache the page. - * - * It is illegal to set the Cached Priority bit if the Non-Cached bit - * is set and the Cached Remotely bit is clear, i.e. if requests to - * the page map directly to memory. - * - * This bit is ignored in level-1 PTEs unless the Page bit is set. - */ -#define HV_PTE_CACHED_PRIORITY (__HV_PTE_ONE << \ - HV_PTE_INDEX_CACHED_PRIORITY) - -/** Is this a readable mapping? - * - * If this bit is set, code will be permitted to read from (e.g., - * issue load instructions against) the virtual addresses mapped by - * this PTE. - * - * It is illegal for this bit to be clear if the Writable bit is set. - * - * This bit is ignored in level-1 PTEs unless the Page bit is set. - */ -#define HV_PTE_READABLE (__HV_PTE_ONE << HV_PTE_INDEX_READABLE) - -/** Is this a writable mapping? - * - * If this bit is set, code will be permitted to write to (e.g., issue - * store instructions against) the virtual addresses mapped by this - * PTE. - * - * This bit is ignored in level-1 PTEs unless the Page bit is set. - */ -#define HV_PTE_WRITABLE (__HV_PTE_ONE << HV_PTE_INDEX_WRITABLE) - -/** Is this an executable mapping? - * - * If this bit is set, code will be permitted to execute from - * (e.g., jump to) the virtual addresses mapped by this PTE. - * - * This bit applies to any processor on the tile, if there are more - * than one. - * - * This bit is ignored in level-1 PTEs unless the Page bit is set. - */ -#define HV_PTE_EXECUTABLE (__HV_PTE_ONE << HV_PTE_INDEX_EXECUTABLE) - -/** The width of a LOTAR's x or y bitfield. */ -#define HV_LOTAR_WIDTH 11 - -/** Converts an x,y pair to a LOTAR value. */ -#define HV_XY_TO_LOTAR(x, y) ((HV_LOTAR)(((x) << HV_LOTAR_WIDTH) | (y))) - -/** Extracts the X component of a lotar. */ -#define HV_LOTAR_X(lotar) ((lotar) >> HV_LOTAR_WIDTH) - -/** Extracts the Y component of a lotar. */ -#define HV_LOTAR_Y(lotar) ((lotar) & ((1 << HV_LOTAR_WIDTH) - 1)) - -#ifndef __ASSEMBLER__ - -/** Define accessor functions for a PTE bit. */ -#define _HV_BIT(name, bit) \ -static __inline int \ -hv_pte_get_##name(HV_PTE pte) \ -{ \ - return (pte.val >> HV_PTE_INDEX_##bit) & 1; \ -} \ - \ -static __inline HV_PTE \ -hv_pte_set_##name(HV_PTE pte) \ -{ \ - pte.val |= 1ULL << HV_PTE_INDEX_##bit; \ - return pte; \ -} \ - \ -static __inline HV_PTE \ -hv_pte_clear_##name(HV_PTE pte) \ -{ \ - pte.val &= ~(1ULL << HV_PTE_INDEX_##bit); \ - return pte; \ -} - -/* Generate accessors to get, set, and clear various PTE flags. - */ -_HV_BIT(present, PRESENT) -_HV_BIT(page, PAGE) -_HV_BIT(super, SUPER) -_HV_BIT(client0, CLIENT0) -_HV_BIT(client1, CLIENT1) -_HV_BIT(client2, CLIENT2) -_HV_BIT(migrating, MIGRATING) -_HV_BIT(nc, NC) -_HV_BIT(readable, READABLE) -_HV_BIT(writable, WRITABLE) -_HV_BIT(executable, EXECUTABLE) -_HV_BIT(accessed, ACCESSED) -_HV_BIT(dirty, DIRTY) -_HV_BIT(no_alloc_l1, NO_ALLOC_L1) -_HV_BIT(no_alloc_l2, NO_ALLOC_L2) -_HV_BIT(cached_priority, CACHED_PRIORITY) -_HV_BIT(global, GLOBAL) -_HV_BIT(user, USER) - -#undef _HV_BIT - -/** Get the page mode from the PTE. - * - * This field generally determines whether and how accesses to the page - * are cached; the HV_PTE_MODE_xxx symbols define the legal values for the - * page mode. The NC, NO_ALLOC_L1, and NO_ALLOC_L2 bits modify this - * general policy. - */ -static __inline unsigned int -hv_pte_get_mode(const HV_PTE pte) -{ - return (((__hv32) pte.val) >> HV_PTE_INDEX_MODE) & - ((1 << HV_PTE_MODE_BITS) - 1); -} - -/** Set the page mode into a PTE. See hv_pte_get_mode. */ -static __inline HV_PTE -hv_pte_set_mode(HV_PTE pte, unsigned int val) -{ - pte.val &= ~(((1ULL << HV_PTE_MODE_BITS) - 1) << HV_PTE_INDEX_MODE); - pte.val |= val << HV_PTE_INDEX_MODE; - return pte; -} - -/** Get the page frame number from the PTE. - * - * This field contains the upper bits of the CPA (client physical - * address) of the target page; the complete CPA is this field with - * HV_LOG2_PAGE_TABLE_ALIGN zero bits appended to it. - * - * For all PTEs in the lowest-level page table, and for all PTEs with - * the Page bit set in all page tables, the CPA must be aligned modulo - * the relevant page size. - */ -static __inline unsigned long -hv_pte_get_ptfn(const HV_PTE pte) -{ - return pte.val >> HV_PTE_INDEX_PTFN; -} - -/** Set the page table frame number into a PTE. See hv_pte_get_ptfn. */ -static __inline HV_PTE -hv_pte_set_ptfn(HV_PTE pte, unsigned long val) -{ - pte.val &= ~(((1ULL << HV_PTE_PTFN_BITS)-1) << HV_PTE_INDEX_PTFN); - pte.val |= (__hv64) val << HV_PTE_INDEX_PTFN; - return pte; -} - -/** Get the client physical address from the PTE. See hv_pte_set_ptfn. */ -static __inline HV_PhysAddr -hv_pte_get_pa(const HV_PTE pte) -{ - return (__hv64) hv_pte_get_ptfn(pte) << HV_LOG2_PAGE_TABLE_ALIGN; -} - -/** Set the client physical address into a PTE. See hv_pte_get_ptfn. */ -static __inline HV_PTE -hv_pte_set_pa(HV_PTE pte, HV_PhysAddr pa) -{ - return hv_pte_set_ptfn(pte, pa >> HV_LOG2_PAGE_TABLE_ALIGN); -} - - -/** Get the remote tile caching this page. - * - * Specifies the remote tile which is providing the L3 cache for this page. - * - * This field is ignored unless the page mode is HV_PTE_MODE_CACHE_TILE_L3. - * - * In level-1 PTEs, if the Page bit is clear, this field determines how the - * level-2 page table is accessed. - */ -static __inline unsigned int -hv_pte_get_lotar(const HV_PTE pte) -{ - unsigned int lotar = ((__hv32) pte.val) >> HV_PTE_INDEX_LOTAR; - - return HV_XY_TO_LOTAR( (lotar >> (HV_PTE_LOTAR_BITS / 2)), - (lotar & ((1 << (HV_PTE_LOTAR_BITS / 2)) - 1)) ); -} - - -/** Set the remote tile caching a page into a PTE. See hv_pte_get_lotar. */ -static __inline HV_PTE -hv_pte_set_lotar(HV_PTE pte, unsigned int val) -{ - unsigned int x = HV_LOTAR_X(val); - unsigned int y = HV_LOTAR_Y(val); - - pte.val &= ~(((1ULL << HV_PTE_LOTAR_BITS)-1) << HV_PTE_INDEX_LOTAR); - pte.val |= (x << (HV_PTE_INDEX_LOTAR + HV_PTE_LOTAR_BITS / 2)) | - (y << HV_PTE_INDEX_LOTAR); - return pte; -} - -#endif /* !__ASSEMBLER__ */ - -/** Converts a client physical address to a ptfn. */ -#define HV_CPA_TO_PTFN(p) ((p) >> HV_LOG2_PAGE_TABLE_ALIGN) - -/** Converts a ptfn to a client physical address. */ -#define HV_PTFN_TO_CPA(p) (((HV_PhysAddr)(p)) << HV_LOG2_PAGE_TABLE_ALIGN) - -#if CHIP_VA_WIDTH() > 32 - -/* - * Note that we currently do not allow customizing the page size - * of the L0 pages, but fix them at 4GB, so we do not use the - * "_HV_xxx" nomenclature for the L0 macros. - */ - -/** Log number of HV_PTE entries in L0 page table */ -#define HV_LOG2_L0_ENTRIES (CHIP_VA_WIDTH() - HV_LOG2_L1_SPAN) - -/** Number of HV_PTE entries in L0 page table */ -#define HV_L0_ENTRIES (1 << HV_LOG2_L0_ENTRIES) - -/** Log size of L0 page table in bytes */ -#define HV_LOG2_L0_SIZE (HV_LOG2_PTE_SIZE + HV_LOG2_L0_ENTRIES) - -/** Size of L0 page table in bytes */ -#define HV_L0_SIZE (1 << HV_LOG2_L0_SIZE) - -#ifdef __ASSEMBLER__ - -/** Index in L0 for a specific VA */ -#define HV_L0_INDEX(va) \ - (((va) >> HV_LOG2_L1_SPAN) & (HV_L0_ENTRIES - 1)) - -#else - -/** Index in L1 for a specific VA */ -#define HV_L0_INDEX(va) \ - (((HV_VirtAddr)(va) >> HV_LOG2_L1_SPAN) & (HV_L0_ENTRIES - 1)) - -#endif - -#endif /* CHIP_VA_WIDTH() > 32 */ - -/** Log number of HV_PTE entries in L1 page table */ -#define _HV_LOG2_L1_ENTRIES(log2_page_size_large) \ - (HV_LOG2_L1_SPAN - log2_page_size_large) - -/** Number of HV_PTE entries in L1 page table */ -#define _HV_L1_ENTRIES(log2_page_size_large) \ - (1 << _HV_LOG2_L1_ENTRIES(log2_page_size_large)) - -/** Log size of L1 page table in bytes */ -#define _HV_LOG2_L1_SIZE(log2_page_size_large) \ - (HV_LOG2_PTE_SIZE + _HV_LOG2_L1_ENTRIES(log2_page_size_large)) - -/** Size of L1 page table in bytes */ -#define _HV_L1_SIZE(log2_page_size_large) \ - (1 << _HV_LOG2_L1_SIZE(log2_page_size_large)) - -/** Log number of HV_PTE entries in level-2 page table */ -#define _HV_LOG2_L2_ENTRIES(log2_page_size_large, log2_page_size_small) \ - (log2_page_size_large - log2_page_size_small) - -/** Number of HV_PTE entries in level-2 page table */ -#define _HV_L2_ENTRIES(log2_page_size_large, log2_page_size_small) \ - (1 << _HV_LOG2_L2_ENTRIES(log2_page_size_large, log2_page_size_small)) - -/** Log size of level-2 page table in bytes */ -#define _HV_LOG2_L2_SIZE(log2_page_size_large, log2_page_size_small) \ - (HV_LOG2_PTE_SIZE + \ - _HV_LOG2_L2_ENTRIES(log2_page_size_large, log2_page_size_small)) - -/** Size of level-2 page table in bytes */ -#define _HV_L2_SIZE(log2_page_size_large, log2_page_size_small) \ - (1 << _HV_LOG2_L2_SIZE(log2_page_size_large, log2_page_size_small)) - -#ifdef __ASSEMBLER__ - -#if CHIP_VA_WIDTH() > 32 - -/** Index in L1 for a specific VA */ -#define _HV_L1_INDEX(va, log2_page_size_large) \ - (((va) >> log2_page_size_large) & (_HV_L1_ENTRIES(log2_page_size_large) - 1)) - -#else /* CHIP_VA_WIDTH() > 32 */ - -/** Index in L1 for a specific VA */ -#define _HV_L1_INDEX(va, log2_page_size_large) \ - (((va) >> log2_page_size_large)) - -#endif /* CHIP_VA_WIDTH() > 32 */ - -/** Index in level-2 page table for a specific VA */ -#define _HV_L2_INDEX(va, log2_page_size_large, log2_page_size_small) \ - (((va) >> log2_page_size_small) & \ - (_HV_L2_ENTRIES(log2_page_size_large, log2_page_size_small) - 1)) - -#else /* __ASSEMBLER __ */ - -#if CHIP_VA_WIDTH() > 32 - -/** Index in L1 for a specific VA */ -#define _HV_L1_INDEX(va, log2_page_size_large) \ - (((HV_VirtAddr)(va) >> log2_page_size_large) & \ - (_HV_L1_ENTRIES(log2_page_size_large) - 1)) - -#else /* CHIP_VA_WIDTH() > 32 */ - -/** Index in L1 for a specific VA */ -#define _HV_L1_INDEX(va, log2_page_size_large) \ - (((HV_VirtAddr)(va) >> log2_page_size_large)) - -#endif /* CHIP_VA_WIDTH() > 32 */ - -/** Index in level-2 page table for a specific VA */ -#define _HV_L2_INDEX(va, log2_page_size_large, log2_page_size_small) \ - (((HV_VirtAddr)(va) >> log2_page_size_small) & \ - (_HV_L2_ENTRIES(log2_page_size_large, log2_page_size_small) - 1)) - -#endif /* __ASSEMBLER __ */ - -/** Position of the PFN field within the PTE (subset of the PTFN). */ -#define _HV_PTE_INDEX_PFN(log2_page_size) \ - (HV_PTE_INDEX_PTFN + (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN)) - -/** Length of the PFN field within the PTE (subset of the PTFN). */ -#define _HV_PTE_INDEX_PFN_BITS(log2_page_size) \ - (HV_PTE_INDEX_PTFN_BITS - (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN)) - -/** Converts a client physical address to a pfn. */ -#define _HV_CPA_TO_PFN(p, log2_page_size) ((p) >> log2_page_size) - -/** Converts a pfn to a client physical address. */ -#define _HV_PFN_TO_CPA(p, log2_page_size) \ - (((HV_PhysAddr)(p)) << log2_page_size) - -/** Converts a ptfn to a pfn. */ -#define _HV_PTFN_TO_PFN(p, log2_page_size) \ - ((p) >> (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN)) - -/** Converts a pfn to a ptfn. */ -#define _HV_PFN_TO_PTFN(p, log2_page_size) \ - ((p) << (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN)) - -#endif /* _HV_HV_H */ diff --git a/arch/tile/include/hv/iorpc.h b/arch/tile/include/hv/iorpc.h deleted file mode 100644 index ddf1604482b3..000000000000 --- a/arch/tile/include/hv/iorpc.h +++ /dev/null @@ -1,714 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ -#ifndef _HV_IORPC_H_ -#define _HV_IORPC_H_ - -/** - * - * Error codes and struct definitions for the IO RPC library. - * - * The hypervisor's IO RPC component provides a convenient way for - * driver authors to proxy system calls between user space, linux, and - * the hypervisor driver. The core of the system is a set of Python - * files that take ".idl" files as input and generates the following - * source code: - * - * - _rpc_call() routines for use in userspace IO libraries. These - * routines take an argument list specified in the .idl file, pack the - * arguments in to a buffer, and read or write that buffer via the - * Linux iorpc driver. - * - * - dispatch_read() and dispatch_write() routines that hypervisor - * drivers can use to implement most of their dev_pread() and - * dev_pwrite() methods. These routines decode the incoming parameter - * blob, permission check and translate parameters where appropriate, - * and then invoke a callback routine for whichever RPC call has - * arrived. The driver simply implements the set of callback - * routines. - * - * The IO RPC system also includes the Linux 'iorpc' driver, which - * proxies calls between the userspace library and the hypervisor - * driver. The Linux driver is almost entirely device agnostic; it - * watches for special flags indicating cases where a memory buffer - * address might need to be translated, etc. As a result, driver - * writers can avoid many of the problem cases related to registering - * hardware resources like memory pages or interrupts. However, the - * drivers must be careful to obey the conventions documented below in - * order to work properly with the generic Linux iorpc driver. - * - * @section iorpc_domains Service Domains - * - * All iorpc-based drivers must support a notion of service domains. - * A service domain is basically an application context - state - * indicating resources that are allocated to that particular app - * which it may access and (perhaps) other applications may not - * access. Drivers can support any number of service domains they - * choose. In some cases the design is limited by a number of service - * domains supported by the IO hardware; in other cases the service - * domains are a purely software concept and the driver chooses a - * maximum number of domains based on how much state memory it is - * willing to preallocate. - * - * For example, the mPIPE driver only supports as many service domains - * as are supported by the mPIPE hardware. This limitation is - * required because the hardware implements its own MMIO protection - * scheme to allow large MMIO mappings while still protecting small - * register ranges within the page that should only be accessed by the - * hypervisor. - * - * In contrast, drivers with no hardware service domain limitations - * (for instance the TRIO shim) can implement an arbitrary number of - * service domains. In these cases, each service domain is limited to - * a carefully restricted set of legal MMIO addresses if necessary to - * keep one application from corrupting another application's state. - * - * @section iorpc_conventions System Call Conventions - * - * The driver's open routine is responsible for allocating a new - * service domain for each hv_dev_open() call. By convention, the - * return value from open() should be the service domain number on - * success, or GXIO_ERR_NO_SVC_DOM if no more service domains are - * available. - * - * The implementations of hv_dev_pread() and hv_dev_pwrite() are - * responsible for validating the devhdl value passed up by the - * client. Since the device handle returned by hv_dev_open() should - * embed the positive service domain number, drivers should make sure - * that DRV_HDL2BITS(devhdl) is a legal service domain. If the client - * passes an illegal service domain number, the routine should return - * GXIO_ERR_INVAL_SVC_DOM. Once the service domain number has been - * validated, the driver can copy to/from the client buffer and call - * the dispatch_read() or dispatch_write() methods created by the RPC - * generator. - * - * The hv_dev_close() implementation should reset all service domain - * state and put the service domain back on a free list for - * reallocation by a future application. In most cases, this will - * require executing a hardware reset or drain flow and denying any - * MMIO regions that were created for the service domain. - * - * @section iorpc_data Special Data Types - * - * The .idl file syntax allows the creation of syscalls with special - * parameters that require permission checks or translations as part - * of the system call path. Because of limitations in the code - * generator, APIs are generally limited to just one of these special - * parameters per system call, and they are sometimes required to be - * the first or last parameter to the call. Special parameters - * include: - * - * @subsection iorpc_mem_buffer MEM_BUFFER - * - * The MEM_BUFFER() datatype allows user space to "register" memory - * buffers with a device. Registering memory accomplishes two tasks: - * Linux keeps track of all buffers that might be modified by a - * hardware device, and the hardware device drivers bind registered - * buffers to particular hardware resources like ingress NotifRings. - * The MEM_BUFFER() idl syntax can take extra flags like ALIGN_64KB, - * ALIGN_SELF_SIZE, and FLAGS indicating that memory buffers must have - * certain alignment or that the user should be able to pass a "memory - * flags" word specifying attributes like nt_hint or IO cache pinning. - * The parser will accept multiple MEM_BUFFER() flags. - * - * Implementations must obey the following conventions when - * registering memory buffers via the iorpc flow. These rules are a - * result of the Linux driver implementation, which needs to keep - * track of how many times a particular page has been registered with - * the hardware so that it can release the page when all those - * registrations are cleared. - * - * - Memory registrations that refer to a resource which has already - * been bound must return GXIO_ERR_ALREADY_INIT. Thus, it is an - * error to register memory twice without resetting (i.e. closing) the - * resource in between. This convention keeps the Linux driver from - * having to track which particular devices a page is bound to. - * - * - At present, a memory registration is only cleared when the - * service domain is reset. In this case, the Linux driver simply - * closes the HV device file handle and then decrements the reference - * counts of all pages that were previously registered with the - * device. - * - * - In the future, we may add a mechanism for unregistering memory. - * One possible implementation would require that the user specify - * which buffer is currently registered. The HV would then verify - * that that page was actually the one currently mapped and return - * success or failure to Linux, which would then only decrement the - * page reference count if the addresses were mapped. Another scheme - * might allow Linux to pass a token to the HV to be returned when the - * resource is unmapped. - * - * @subsection iorpc_interrupt INTERRUPT - * - * The INTERRUPT .idl datatype allows the client to bind hardware - * interrupts to a particular combination of IPI parameters - CPU, IPI - * PL, and event bit number. This data is passed via a special - * datatype so that the Linux driver can validate the CPU and PL and - * the HV generic iorpc code can translate client CPUs to real CPUs. - * - * @subsection iorpc_pollfd_setup POLLFD_SETUP - * - * The POLLFD_SETUP .idl datatype allows the client to set up hardware - * interrupt bindings which are received by Linux but which are made - * visible to user processes as state transitions on a file descriptor; - * this allows user processes to use Linux primitives, such as poll(), to - * await particular hardware events. This data is passed via a special - * datatype so that the Linux driver may recognize the pollable file - * descriptor and translate it to a set of interrupt target information, - * and so that the HV generic iorpc code can translate client CPUs to real - * CPUs. - * - * @subsection iorpc_pollfd POLLFD - * - * The POLLFD .idl datatype allows manipulation of hardware interrupt - * bindings set up via the POLLFD_SETUP datatype; common operations are - * resetting the state of the requested interrupt events, and unbinding any - * bound interrupts. This data is passed via a special datatype so that - * the Linux driver may recognize the pollable file descriptor and - * translate it to an interrupt identifier previously supplied by the - * hypervisor as the result of an earlier pollfd_setup operation. - * - * @subsection iorpc_blob BLOB - * - * The BLOB .idl datatype allows the client to write an arbitrary - * length string of bytes up to the hypervisor driver. This can be - * useful for passing up large, arbitrarily structured data like - * classifier programs. The iorpc stack takes care of validating the - * buffer VA and CPA as the data passes up to the hypervisor. Unlike - * MEM_BUFFER(), the buffer is not registered - Linux does not bump - * page refcounts and the HV driver should not reuse the buffer once - * the system call is complete. - * - * @section iorpc_translation Translating User Space Calls - * - * The ::iorpc_offset structure describes the formatting of the offset - * that is passed to pread() or pwrite() as part of the generated RPC code. - * When the user calls up to Linux, the rpc code fills in all the fields of - * the offset, including a 16-bit opcode, a 16 bit format indicator, and 32 - * bits of user-specified "sub-offset". The opcode indicates which syscall - * is being requested. The format indicates whether there is a "prefix - * struct" at the start of the memory buffer passed to pwrite(), and if so - * what data is in that prefix struct. These prefix structs are used to - * implement special datatypes like MEM_BUFFER() and INTERRUPT - we arrange - * to put data that needs translation and permission checks at the start of - * the buffer so that the Linux driver and generic portions of the HV iorpc - * code can easily access the data. The 32 bits of user-specified - * "sub-offset" are most useful for pread() calls where the user needs to - * also pass in a few bits indicating which register to read, etc. - * - * The Linux iorpc driver watches for system calls that contain prefix - * structs so that it can translate parameters and bump reference - * counts as appropriate. It does not (currently) have any knowledge - * of the per-device opcodes - it doesn't care what operation you're - * doing to mPIPE, so long as it can do all the generic book-keeping. - * The hv/iorpc.h header file defines all of the generic encoding bits - * needed to translate iorpc calls without knowing which particular - * opcode is being issued. - * - * @section iorpc_globals Global iorpc Calls - * - * Implementing mmap() required adding some special iorpc syscalls - * that are only called by the Linux driver, never by userspace. - * These include get_mmio_base() and check_mmio_offset(). These - * routines are described in globals.idl and must be included in every - * iorpc driver. By providing these routines in every driver, Linux's - * mmap implementation can easily get the PTE bits it needs and - * validate the PA offset without needing to know the per-device - * opcodes to perform those tasks. - * - * @section iorpc_kernel Supporting gxio APIs in the Kernel - * - * The iorpc code generator also supports generation of kernel code - * implementing the gxio APIs. This capability is currently used by - * the mPIPE network driver, and will likely be used by the TRIO root - * complex and endpoint drivers and perhaps an in-kernel crypto - * driver. Each driver that wants to instantiate iorpc calls in the - * kernel needs to generate a kernel version of the generate rpc code - * and (probably) copy any related gxio source files into the kernel. - * The mPIPE driver provides a good example of this pattern. - */ - -#ifdef __KERNEL__ -#include <linux/stddef.h> -#else -#include <stddef.h> -#endif - -#if defined(__HV__) -#include <hv/hypervisor.h> -#elif defined(__KERNEL__) -#include <hv/hypervisor.h> -#include <linux/types.h> -#else -#include <stdint.h> -#endif - - -/** Code indicating translation services required within the RPC path. - * These indicate whether there is a translatable struct at the start - * of the RPC buffer and what information that struct contains. - */ -enum iorpc_format_e -{ - /** No translation required, no prefix struct. */ - IORPC_FORMAT_NONE, - - /** No translation required, no prefix struct, no access to this - * operation from user space. */ - IORPC_FORMAT_NONE_NOUSER, - - /** Prefix struct contains user VA and size. */ - IORPC_FORMAT_USER_MEM, - - /** Prefix struct contains CPA, size, and homing bits. */ - IORPC_FORMAT_KERNEL_MEM, - - /** Prefix struct contains interrupt. */ - IORPC_FORMAT_KERNEL_INTERRUPT, - - /** Prefix struct contains user-level interrupt. */ - IORPC_FORMAT_USER_INTERRUPT, - - /** Prefix struct contains pollfd_setup (interrupt information). */ - IORPC_FORMAT_KERNEL_POLLFD_SETUP, - - /** Prefix struct contains user-level pollfd_setup (file descriptor). */ - IORPC_FORMAT_USER_POLLFD_SETUP, - - /** Prefix struct contains pollfd (interrupt cookie). */ - IORPC_FORMAT_KERNEL_POLLFD, - - /** Prefix struct contains user-level pollfd (file descriptor). */ - IORPC_FORMAT_USER_POLLFD, -}; - - -/** Generate an opcode given format and code. */ -#define IORPC_OPCODE(FORMAT, CODE) (((FORMAT) << 16) | (CODE)) - -/** The offset passed through the read() and write() system calls - combines an opcode with 32 bits of user-specified offset. */ -union iorpc_offset -{ -#ifndef __BIG_ENDIAN__ - uint64_t offset; /**< All bits. */ - - struct - { - uint16_t code; /**< RPC code. */ - uint16_t format; /**< iorpc_format_e */ - uint32_t sub_offset; /**< caller-specified offset. */ - }; - - uint32_t opcode; /**< Opcode combines code & format. */ -#else - uint64_t offset; /**< All bits. */ - - struct - { - uint32_t sub_offset; /**< caller-specified offset. */ - uint16_t format; /**< iorpc_format_e */ - uint16_t code; /**< RPC code. */ - }; - - struct - { - uint32_t padding; - uint32_t opcode; /**< Opcode combines code & format. */ - }; -#endif -}; - - -/** Homing and cache hinting bits that can be used by IO devices. */ -struct iorpc_mem_attr -{ - unsigned int lotar_x:4; /**< lotar X bits (or Gx page_mask). */ - unsigned int lotar_y:4; /**< lotar Y bits (or Gx page_offset). */ - unsigned int hfh:1; /**< Uses hash-for-home. */ - unsigned int nt_hint:1; /**< Non-temporal hint. */ - unsigned int io_pin:1; /**< Only fill 'IO' cache ways. */ -}; - -/** Set the nt_hint bit. */ -#define IORPC_MEM_BUFFER_FLAG_NT_HINT (1 << 0) - -/** Set the IO pin bit. */ -#define IORPC_MEM_BUFFER_FLAG_IO_PIN (1 << 1) - - -/** A structure used to describe memory registration. Different - protection levels describe memory differently, so this union - contains all the different possible descriptions. As a request - moves up the call chain, each layer translates from one - description format to the next. In particular, the Linux iorpc - driver translates user VAs into CPAs and homing parameters. */ -union iorpc_mem_buffer -{ - struct - { - uint64_t va; /**< User virtual address. */ - uint64_t size; /**< Buffer size. */ - unsigned int flags; /**< nt_hint, IO pin. */ - } - user; /**< Buffer as described by user apps. */ - - struct - { - unsigned long long cpa; /**< Client physical address. */ -#if defined(__KERNEL__) || defined(__HV__) - size_t size; /**< Buffer size. */ - HV_PTE pte; /**< PTE describing memory homing. */ -#else - uint64_t size; - uint64_t pte; -#endif - unsigned int flags; /**< nt_hint, IO pin. */ - } - kernel; /**< Buffer as described by kernel. */ - - struct - { - unsigned long long pa; /**< Physical address. */ - size_t size; /**< Buffer size. */ - struct iorpc_mem_attr attr; /**< Homing and locality hint bits. */ - } - hv; /**< Buffer parameters for HV driver. */ -}; - - -/** A structure used to describe interrupts. The format differs slightly - * for user and kernel interrupts. As with the mem_buffer_t, translation - * between the formats is done at each level. */ -union iorpc_interrupt -{ - struct - { - int cpu; /**< CPU. */ - int event; /**< evt_num */ - } - user; /**< Interrupt as described by user applications. */ - - struct - { - int x; /**< X coord. */ - int y; /**< Y coord. */ - int ipi; /**< int_num */ - int event; /**< evt_num */ - } - kernel; /**< Interrupt as described by the kernel. */ - -}; - - -/** A structure used to describe interrupts used with poll(). The format - * differs significantly for requests from user to kernel, and kernel to - * hypervisor. As with the mem_buffer_t, translation between the formats - * is done at each level. */ -union iorpc_pollfd_setup -{ - struct - { - int fd; /**< Pollable file descriptor. */ - } - user; /**< pollfd_setup as described by user applications. */ - - struct - { - int x; /**< X coord. */ - int y; /**< Y coord. */ - int ipi; /**< int_num */ - int event; /**< evt_num */ - } - kernel; /**< pollfd_setup as described by the kernel. */ - -}; - - -/** A structure used to describe previously set up interrupts used with - * poll(). The format differs significantly for requests from user to - * kernel, and kernel to hypervisor. As with the mem_buffer_t, translation - * between the formats is done at each level. */ -union iorpc_pollfd -{ - struct - { - int fd; /**< Pollable file descriptor. */ - } - user; /**< pollfd as described by user applications. */ - - struct - { - int cookie; /**< hv cookie returned by the pollfd_setup operation. */ - } - kernel; /**< pollfd as described by the kernel. */ - -}; - - -/** The various iorpc devices use error codes from -1100 to -1299. - * - * This range is distinct from netio (-700 to -799), the hypervisor - * (-800 to -899), tilepci (-900 to -999), ilib (-1000 to -1099), - * gxcr (-1300 to -1399) and gxpci (-1400 to -1499). - */ -enum gxio_err_e { - - /** Largest iorpc error number. */ - GXIO_ERR_MAX = -1101, - - - /********************************************************/ - /* Generic Error Codes */ - /********************************************************/ - - /** Bad RPC opcode - possible version incompatibility. */ - GXIO_ERR_OPCODE = -1101, - - /** Invalid parameter. */ - GXIO_ERR_INVAL = -1102, - - /** Memory buffer did not meet alignment requirements. */ - GXIO_ERR_ALIGNMENT = -1103, - - /** Memory buffers must be coherent and cacheable. */ - GXIO_ERR_COHERENCE = -1104, - - /** Resource already initialized. */ - GXIO_ERR_ALREADY_INIT = -1105, - - /** No service domains available. */ - GXIO_ERR_NO_SVC_DOM = -1106, - - /** Illegal service domain number. */ - GXIO_ERR_INVAL_SVC_DOM = -1107, - - /** Illegal MMIO address. */ - GXIO_ERR_MMIO_ADDRESS = -1108, - - /** Illegal interrupt binding. */ - GXIO_ERR_INTERRUPT = -1109, - - /** Unreasonable client memory. */ - GXIO_ERR_CLIENT_MEMORY = -1110, - - /** No more IOTLB entries. */ - GXIO_ERR_IOTLB_ENTRY = -1111, - - /** Invalid memory size. */ - GXIO_ERR_INVAL_MEMORY_SIZE = -1112, - - /** Unsupported operation. */ - GXIO_ERR_UNSUPPORTED_OP = -1113, - - /** Insufficient DMA credits. */ - GXIO_ERR_DMA_CREDITS = -1114, - - /** Operation timed out. */ - GXIO_ERR_TIMEOUT = -1115, - - /** No such device or object. */ - GXIO_ERR_NO_DEVICE = -1116, - - /** Device or resource busy. */ - GXIO_ERR_BUSY = -1117, - - /** I/O error. */ - GXIO_ERR_IO = -1118, - - /** Permissions error. */ - GXIO_ERR_PERM = -1119, - - - - /********************************************************/ - /* Test Device Error Codes */ - /********************************************************/ - - /** Illegal register number. */ - GXIO_TEST_ERR_REG_NUMBER = -1120, - - /** Illegal buffer slot. */ - GXIO_TEST_ERR_BUFFER_SLOT = -1121, - - - /********************************************************/ - /* MPIPE Error Codes */ - /********************************************************/ - - - /** Invalid buffer size. */ - GXIO_MPIPE_ERR_INVAL_BUFFER_SIZE = -1131, - - /** Cannot allocate buffer stack. */ - GXIO_MPIPE_ERR_NO_BUFFER_STACK = -1140, - - /** Invalid buffer stack number. */ - GXIO_MPIPE_ERR_BAD_BUFFER_STACK = -1141, - - /** Cannot allocate NotifRing. */ - GXIO_MPIPE_ERR_NO_NOTIF_RING = -1142, - - /** Invalid NotifRing number. */ - GXIO_MPIPE_ERR_BAD_NOTIF_RING = -1143, - - /** Cannot allocate NotifGroup. */ - GXIO_MPIPE_ERR_NO_NOTIF_GROUP = -1144, - - /** Invalid NotifGroup number. */ - GXIO_MPIPE_ERR_BAD_NOTIF_GROUP = -1145, - - /** Cannot allocate bucket. */ - GXIO_MPIPE_ERR_NO_BUCKET = -1146, - - /** Invalid bucket number. */ - GXIO_MPIPE_ERR_BAD_BUCKET = -1147, - - /** Cannot allocate eDMA ring. */ - GXIO_MPIPE_ERR_NO_EDMA_RING = -1148, - - /** Invalid eDMA ring number. */ - GXIO_MPIPE_ERR_BAD_EDMA_RING = -1149, - - /** Invalid channel number. */ - GXIO_MPIPE_ERR_BAD_CHANNEL = -1150, - - /** Bad configuration. */ - GXIO_MPIPE_ERR_BAD_CONFIG = -1151, - - /** Empty iqueue. */ - GXIO_MPIPE_ERR_IQUEUE_EMPTY = -1152, - - /** Empty rules. */ - GXIO_MPIPE_ERR_RULES_EMPTY = -1160, - - /** Full rules. */ - GXIO_MPIPE_ERR_RULES_FULL = -1161, - - /** Corrupt rules. */ - GXIO_MPIPE_ERR_RULES_CORRUPT = -1162, - - /** Invalid rules. */ - GXIO_MPIPE_ERR_RULES_INVALID = -1163, - - /** Classifier is too big. */ - GXIO_MPIPE_ERR_CLASSIFIER_TOO_BIG = -1170, - - /** Classifier is too complex. */ - GXIO_MPIPE_ERR_CLASSIFIER_TOO_COMPLEX = -1171, - - /** Classifier has bad header. */ - GXIO_MPIPE_ERR_CLASSIFIER_BAD_HEADER = -1172, - - /** Classifier has bad contents. */ - GXIO_MPIPE_ERR_CLASSIFIER_BAD_CONTENTS = -1173, - - /** Classifier encountered invalid symbol. */ - GXIO_MPIPE_ERR_CLASSIFIER_INVAL_SYMBOL = -1174, - - /** Classifier encountered invalid bounds. */ - GXIO_MPIPE_ERR_CLASSIFIER_INVAL_BOUNDS = -1175, - - /** Classifier encountered invalid relocation. */ - GXIO_MPIPE_ERR_CLASSIFIER_INVAL_RELOCATION = -1176, - - /** Classifier encountered undefined symbol. */ - GXIO_MPIPE_ERR_CLASSIFIER_UNDEF_SYMBOL = -1177, - - - /********************************************************/ - /* TRIO Error Codes */ - /********************************************************/ - - /** Cannot allocate memory map region. */ - GXIO_TRIO_ERR_NO_MEMORY_MAP = -1180, - - /** Invalid memory map region number. */ - GXIO_TRIO_ERR_BAD_MEMORY_MAP = -1181, - - /** Cannot allocate scatter queue. */ - GXIO_TRIO_ERR_NO_SCATTER_QUEUE = -1182, - - /** Invalid scatter queue number. */ - GXIO_TRIO_ERR_BAD_SCATTER_QUEUE = -1183, - - /** Cannot allocate push DMA ring. */ - GXIO_TRIO_ERR_NO_PUSH_DMA_RING = -1184, - - /** Invalid push DMA ring index. */ - GXIO_TRIO_ERR_BAD_PUSH_DMA_RING = -1185, - - /** Cannot allocate pull DMA ring. */ - GXIO_TRIO_ERR_NO_PULL_DMA_RING = -1186, - - /** Invalid pull DMA ring index. */ - GXIO_TRIO_ERR_BAD_PULL_DMA_RING = -1187, - - /** Cannot allocate PIO region. */ - GXIO_TRIO_ERR_NO_PIO = -1188, - - /** Invalid PIO region index. */ - GXIO_TRIO_ERR_BAD_PIO = -1189, - - /** Cannot allocate ASID. */ - GXIO_TRIO_ERR_NO_ASID = -1190, - - /** Invalid ASID. */ - GXIO_TRIO_ERR_BAD_ASID = -1191, - - - /********************************************************/ - /* MICA Error Codes */ - /********************************************************/ - - /** No such accelerator type. */ - GXIO_MICA_ERR_BAD_ACCEL_TYPE = -1220, - - /** Cannot allocate context. */ - GXIO_MICA_ERR_NO_CONTEXT = -1221, - - /** PKA command queue is full, can't add another command. */ - GXIO_MICA_ERR_PKA_CMD_QUEUE_FULL = -1222, - - /** PKA result queue is empty, can't get a result from the queue. */ - GXIO_MICA_ERR_PKA_RESULT_QUEUE_EMPTY = -1223, - - /********************************************************/ - /* GPIO Error Codes */ - /********************************************************/ - - /** Pin not available. Either the physical pin does not exist, or - * it is reserved by the hypervisor for system usage. */ - GXIO_GPIO_ERR_PIN_UNAVAILABLE = -1240, - - /** Pin busy. The pin exists, and is available for use via GXIO, but - * it has been attached by some other process or driver. */ - GXIO_GPIO_ERR_PIN_BUSY = -1241, - - /** Cannot access unattached pin. One or more of the pins being - * manipulated by this call are not attached to the requesting - * context. */ - GXIO_GPIO_ERR_PIN_UNATTACHED = -1242, - - /** Invalid I/O mode for pin. The wiring of the pin in the system - * is such that the I/O mode or electrical control parameters - * requested could cause damage. */ - GXIO_GPIO_ERR_PIN_INVALID_MODE = -1243, - - /** Smallest iorpc error number. */ - GXIO_ERR_MIN = -1299 -}; - - -#endif /* !_HV_IORPC_H_ */ diff --git a/arch/tile/include/hv/netio_errors.h b/arch/tile/include/hv/netio_errors.h deleted file mode 100644 index e1591bff61b5..000000000000 --- a/arch/tile/include/hv/netio_errors.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/** - * Error codes returned from NetIO routines. - */ - -#ifndef __NETIO_ERRORS_H__ -#define __NETIO_ERRORS_H__ - -/** - * @addtogroup error - * - * @brief The error codes returned by NetIO functions. - * - * NetIO functions return 0 (defined as ::NETIO_NO_ERROR) on success, and - * a negative value if an error occurs. - * - * In cases where a NetIO function failed due to a error reported by - * system libraries, the error code will be the negation of the - * system errno at the time of failure. The @ref netio_strerror() - * function will deliver error strings for both NetIO and system error - * codes. - * - * @{ - */ - -/** The set of all NetIO errors. */ -typedef enum -{ - /** Operation successfully completed. */ - NETIO_NO_ERROR = 0, - - /** A packet was successfully retrieved from an input queue. */ - NETIO_PKT = 0, - - /** Largest NetIO error number. */ - NETIO_ERR_MAX = -701, - - /** The tile is not registered with the IPP. */ - NETIO_NOT_REGISTERED = -701, - - /** No packet was available to retrieve from the input queue. */ - NETIO_NOPKT = -702, - - /** The requested function is not implemented. */ - NETIO_NOT_IMPLEMENTED = -703, - - /** On a registration operation, the target queue already has the maximum - * number of tiles registered for it, and no more may be added. On a - * packet send operation, the output queue is full and nothing more can - * be queued until some of the queued packets are actually transmitted. */ - NETIO_QUEUE_FULL = -704, - - /** The calling process or thread is not bound to exactly one CPU. */ - NETIO_BAD_AFFINITY = -705, - - /** Cannot allocate memory on requested controllers. */ - NETIO_CANNOT_HOME = -706, - - /** On a registration operation, the IPP specified is not configured - * to support the options requested; for instance, the application - * wants a specific type of tagged headers which the configured IPP - * doesn't support. Or, the supplied configuration information is - * not self-consistent, or is out of range; for instance, specifying - * both NETIO_RECV and NETIO_NO_RECV, or asking for more than - * NETIO_MAX_SEND_BUFFERS to be preallocated. On a VLAN or bucket - * configure operation, the number of items, or the base item, was - * out of range. - */ - NETIO_BAD_CONFIG = -707, - - /** Too many tiles have registered to transmit packets. */ - NETIO_TOOMANY_XMIT = -708, - - /** Packet transmission was attempted on a queue which was registered - with transmit disabled. */ - NETIO_UNREG_XMIT = -709, - - /** This tile is already registered with the IPP. */ - NETIO_ALREADY_REGISTERED = -710, - - /** The Ethernet link is down. The application should try again later. */ - NETIO_LINK_DOWN = -711, - - /** An invalid memory buffer has been specified. This may be an unmapped - * virtual address, or one which does not meet alignment requirements. - * For netio_input_register(), this error may be returned when multiple - * processes specify different memory regions to be used for NetIO - * buffers. That can happen if these processes specify explicit memory - * regions with the ::NETIO_FIXED_BUFFER_VA flag, or if tmc_cmem_init() - * has not been called by a common ancestor of the processes. - */ - NETIO_FAULT = -712, - - /** Cannot combine user-managed shared memory and cache coherence. */ - NETIO_BAD_CACHE_CONFIG = -713, - - /** Smallest NetIO error number. */ - NETIO_ERR_MIN = -713, - -#ifndef __DOXYGEN__ - /** Used internally to mean that no response is needed; never returned to - * an application. */ - NETIO_NO_RESPONSE = 1 -#endif -} netio_error_t; - -/** @} */ - -#endif /* __NETIO_ERRORS_H__ */ diff --git a/arch/tile/include/hv/netio_intf.h b/arch/tile/include/hv/netio_intf.h deleted file mode 100644 index 8d20972aba2c..000000000000 --- a/arch/tile/include/hv/netio_intf.h +++ /dev/null @@ -1,2975 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/** - * NetIO interface structures and macros. - */ - -#ifndef __NETIO_INTF_H__ -#define __NETIO_INTF_H__ - -#include <hv/netio_errors.h> - -#ifdef __KERNEL__ -#include <linux/types.h> -#else -#include <stdint.h> -#endif - -#if !defined(__HV__) && !defined(__BOGUX__) && !defined(__KERNEL__) -#include <assert.h> -#define netio_assert assert /**< Enable assertions from macros */ -#else -#define netio_assert(...) ((void)(0)) /**< Disable assertions from macros */ -#endif - -/* - * If none of these symbols are defined, we're building libnetio in an - * environment where we have pthreads, so we'll enable locking. - */ -#if !defined(__HV__) && !defined(__BOGUX__) && !defined(__KERNEL__) && \ - !defined(__NEWLIB__) -#define _NETIO_PTHREAD /**< Include a mutex in netio_queue_t below */ - -/* - * If NETIO_UNLOCKED is defined, we don't do use per-cpu locks on - * per-packet NetIO operations. We still do pthread locking on things - * like netio_input_register, though. This is used for building - * libnetio_unlocked. - */ -#ifndef NETIO_UNLOCKED - -/* Avoid PLT overhead by using our own inlined per-cpu lock. */ -#include <sched.h> -typedef int _netio_percpu_mutex_t; - -static __inline int -_netio_percpu_mutex_init(_netio_percpu_mutex_t* lock) -{ - *lock = 0; - return 0; -} - -static __inline int -_netio_percpu_mutex_lock(_netio_percpu_mutex_t* lock) -{ - while (__builtin_expect(__insn_tns(lock), 0)) - sched_yield(); - return 0; -} - -static __inline int -_netio_percpu_mutex_unlock(_netio_percpu_mutex_t* lock) -{ - *lock = 0; - return 0; -} - -#else /* NETIO_UNLOCKED */ - -/* Don't do any locking for per-packet NetIO operations. */ -typedef int _netio_percpu_mutex_t; -#define _netio_percpu_mutex_init(L) -#define _netio_percpu_mutex_lock(L) -#define _netio_percpu_mutex_unlock(L) - -#endif /* NETIO_UNLOCKED */ -#endif /* !__HV__, !__BOGUX, !__KERNEL__, !__NEWLIB__ */ - -/** How many tiles can register for a given queue. - * @ingroup setup */ -#define NETIO_MAX_TILES_PER_QUEUE 64 - - -/** Largest permissible queue identifier. - * @ingroup setup */ -#define NETIO_MAX_QUEUE_ID 255 - - -#ifndef __DOXYGEN__ - -/* Metadata packet checksum/ethertype flags. */ - -/** The L4 checksum has not been calculated. */ -#define _NETIO_PKT_NO_L4_CSUM_SHIFT 0 -#define _NETIO_PKT_NO_L4_CSUM_RMASK 1 -#define _NETIO_PKT_NO_L4_CSUM_MASK \ - (_NETIO_PKT_NO_L4_CSUM_RMASK << _NETIO_PKT_NO_L4_CSUM_SHIFT) - -/** The L3 checksum has not been calculated. */ -#define _NETIO_PKT_NO_L3_CSUM_SHIFT 1 -#define _NETIO_PKT_NO_L3_CSUM_RMASK 1 -#define _NETIO_PKT_NO_L3_CSUM_MASK \ - (_NETIO_PKT_NO_L3_CSUM_RMASK << _NETIO_PKT_NO_L3_CSUM_SHIFT) - -/** The L3 checksum is incorrect (or perhaps has not been calculated). */ -#define _NETIO_PKT_BAD_L3_CSUM_SHIFT 2 -#define _NETIO_PKT_BAD_L3_CSUM_RMASK 1 -#define _NETIO_PKT_BAD_L3_CSUM_MASK \ - (_NETIO_PKT_BAD_L3_CSUM_RMASK << _NETIO_PKT_BAD_L3_CSUM_SHIFT) - -/** The Ethernet packet type is unrecognized. */ -#define _NETIO_PKT_TYPE_UNRECOGNIZED_SHIFT 3 -#define _NETIO_PKT_TYPE_UNRECOGNIZED_RMASK 1 -#define _NETIO_PKT_TYPE_UNRECOGNIZED_MASK \ - (_NETIO_PKT_TYPE_UNRECOGNIZED_RMASK << \ - _NETIO_PKT_TYPE_UNRECOGNIZED_SHIFT) - -/* Metadata packet type flags. */ - -/** Where the packet type bits are; this field is the index into - * _netio_pkt_info. */ -#define _NETIO_PKT_TYPE_SHIFT 4 -#define _NETIO_PKT_TYPE_RMASK 0x3F - -/** How many VLAN tags the packet has, and, if we have two, which one we - * actually grouped on. A VLAN within a proprietary (Marvell or Broadcom) - * tag is counted here. */ -#define _NETIO_PKT_VLAN_SHIFT 4 -#define _NETIO_PKT_VLAN_RMASK 0x3 -#define _NETIO_PKT_VLAN_MASK \ - (_NETIO_PKT_VLAN_RMASK << _NETIO_PKT_VLAN_SHIFT) -#define _NETIO_PKT_VLAN_NONE 0 /* No VLAN tag. */ -#define _NETIO_PKT_VLAN_ONE 1 /* One VLAN tag. */ -#define _NETIO_PKT_VLAN_TWO_OUTER 2 /* Two VLAN tags, outer one used. */ -#define _NETIO_PKT_VLAN_TWO_INNER 3 /* Two VLAN tags, inner one used. */ - -/** Which proprietary tags the packet has. */ -#define _NETIO_PKT_TAG_SHIFT 6 -#define _NETIO_PKT_TAG_RMASK 0x3 -#define _NETIO_PKT_TAG_MASK \ - (_NETIO_PKT_TAG_RMASK << _NETIO_PKT_TAG_SHIFT) -#define _NETIO_PKT_TAG_NONE 0 /* No proprietary tags. */ -#define _NETIO_PKT_TAG_MRVL 1 /* Marvell HyperG.Stack tags. */ -#define _NETIO_PKT_TAG_MRVL_EXT 2 /* HyperG.Stack extended tags. */ -#define _NETIO_PKT_TAG_BRCM 3 /* Broadcom HiGig tags. */ - -/** Whether a packet has an LLC + SNAP header. */ -#define _NETIO_PKT_SNAP_SHIFT 8 -#define _NETIO_PKT_SNAP_RMASK 0x1 -#define _NETIO_PKT_SNAP_MASK \ - (_NETIO_PKT_SNAP_RMASK << _NETIO_PKT_SNAP_SHIFT) - -/* NOTE: Bits 9 and 10 are unused. */ - -/** Length of any custom data before the L2 header, in words. */ -#define _NETIO_PKT_CUSTOM_LEN_SHIFT 11 -#define _NETIO_PKT_CUSTOM_LEN_RMASK 0x1F -#define _NETIO_PKT_CUSTOM_LEN_MASK \ - (_NETIO_PKT_CUSTOM_LEN_RMASK << _NETIO_PKT_CUSTOM_LEN_SHIFT) - -/** The L4 checksum is incorrect (or perhaps has not been calculated). */ -#define _NETIO_PKT_BAD_L4_CSUM_SHIFT 16 -#define _NETIO_PKT_BAD_L4_CSUM_RMASK 0x1 -#define _NETIO_PKT_BAD_L4_CSUM_MASK \ - (_NETIO_PKT_BAD_L4_CSUM_RMASK << _NETIO_PKT_BAD_L4_CSUM_SHIFT) - -/** Length of the L2 header, in words. */ -#define _NETIO_PKT_L2_LEN_SHIFT 17 -#define _NETIO_PKT_L2_LEN_RMASK 0x1F -#define _NETIO_PKT_L2_LEN_MASK \ - (_NETIO_PKT_L2_LEN_RMASK << _NETIO_PKT_L2_LEN_SHIFT) - - -/* Flags in minimal packet metadata. */ - -/** We need an eDMA checksum on this packet. */ -#define _NETIO_PKT_NEED_EDMA_CSUM_SHIFT 0 -#define _NETIO_PKT_NEED_EDMA_CSUM_RMASK 1 -#define _NETIO_PKT_NEED_EDMA_CSUM_MASK \ - (_NETIO_PKT_NEED_EDMA_CSUM_RMASK << _NETIO_PKT_NEED_EDMA_CSUM_SHIFT) - -/* Data within the packet information table. */ - -/* Note that, for efficiency, code which uses these fields assumes that none - * of the shift values below are zero. See uses below for an explanation. */ - -/** Offset within the L2 header of the innermost ethertype (in halfwords). */ -#define _NETIO_PKT_INFO_ETYPE_SHIFT 6 -#define _NETIO_PKT_INFO_ETYPE_RMASK 0x1F - -/** Offset within the L2 header of the VLAN tag (in halfwords). */ -#define _NETIO_PKT_INFO_VLAN_SHIFT 11 -#define _NETIO_PKT_INFO_VLAN_RMASK 0x1F - -#endif - - -/** The size of a memory buffer representing a small packet. - * @ingroup egress */ -#define SMALL_PACKET_SIZE 256 - -/** The size of a memory buffer representing a large packet. - * @ingroup egress */ -#define LARGE_PACKET_SIZE 2048 - -/** The size of a memory buffer representing a jumbo packet. - * @ingroup egress */ -#define JUMBO_PACKET_SIZE (12 * 1024) - - -/* Common ethertypes. - * @ingroup ingress */ -/** @{ */ -/** The ethertype of IPv4. */ -#define ETHERTYPE_IPv4 (0x0800) -/** The ethertype of ARP. */ -#define ETHERTYPE_ARP (0x0806) -/** The ethertype of VLANs. */ -#define ETHERTYPE_VLAN (0x8100) -/** The ethertype of a Q-in-Q header. */ -#define ETHERTYPE_Q_IN_Q (0x9100) -/** The ethertype of IPv6. */ -#define ETHERTYPE_IPv6 (0x86DD) -/** The ethertype of MPLS. */ -#define ETHERTYPE_MPLS (0x8847) -/** @} */ - - -/** The possible return values of NETIO_PKT_STATUS. - * @ingroup ingress - */ -typedef enum -{ - /** No problems were detected with this packet. */ - NETIO_PKT_STATUS_OK, - /** The packet is undersized; this is expected behavior if the packet's - * ethertype is unrecognized, but otherwise the packet is likely corrupt. */ - NETIO_PKT_STATUS_UNDERSIZE, - /** The packet is oversized and some trailing bytes have been discarded. - This is expected behavior for short packets, since it's impossible to - precisely determine the amount of padding which may have been added to - them to make them meet the minimum Ethernet packet size. */ - NETIO_PKT_STATUS_OVERSIZE, - /** The packet was judged to be corrupt by hardware (for instance, it had - a bad CRC, or part of it was discarded due to lack of buffer space in - the I/O shim) and should be discarded. */ - NETIO_PKT_STATUS_BAD -} netio_pkt_status_t; - - -/** Log2 of how many buckets we have. */ -#define NETIO_LOG2_NUM_BUCKETS (10) - -/** How many buckets we have. - * @ingroup ingress */ -#define NETIO_NUM_BUCKETS (1 << NETIO_LOG2_NUM_BUCKETS) - - -/** - * @brief A group-to-bucket identifier. - * - * @ingroup setup - * - * This tells us what to do with a given group. - */ -typedef union { - /** The header broken down into bits. */ - struct { - /** Whether we should balance on L4, if available */ - unsigned int __balance_on_l4:1; - /** Whether we should balance on L3, if available */ - unsigned int __balance_on_l3:1; - /** Whether we should balance on L2, if available */ - unsigned int __balance_on_l2:1; - /** Reserved for future use */ - unsigned int __reserved:1; - /** The base bucket to use to send traffic */ - unsigned int __bucket_base:NETIO_LOG2_NUM_BUCKETS; - /** The mask to apply to the balancing value. This must be one less - * than a power of two, e.g. 0x3 or 0xFF. - */ - unsigned int __bucket_mask:NETIO_LOG2_NUM_BUCKETS; - /** Pad to 32 bits */ - unsigned int __padding:(32 - 4 - 2 * NETIO_LOG2_NUM_BUCKETS); - } bits; - /** To send out the IDN. */ - unsigned int word; -} -netio_group_t; - - -/** - * @brief A VLAN-to-bucket identifier. - * - * @ingroup setup - * - * This tells us what to do with a given VLAN. - */ -typedef netio_group_t netio_vlan_t; - - -/** - * A bucket-to-queue mapping. - * @ingroup setup - */ -typedef unsigned char netio_bucket_t; - - -/** - * A packet size can always fit in a netio_size_t. - * @ingroup setup - */ -typedef unsigned int netio_size_t; - - -/** - * @brief Ethernet standard (ingress) packet metadata. - * - * @ingroup ingress - * - * This is additional data associated with each packet. - * This structure is opaque and accessed through the @ref ingress. - * - * Also, the buffer population operation currently assumes that standard - * metadata is at least as large as minimal metadata, and will need to be - * modified if that is no longer the case. - */ -typedef struct -{ -#ifdef __DOXYGEN__ - /** This structure is opaque. */ - unsigned char opaque[24]; -#else - /** The overall ordinal of the packet */ - unsigned int __packet_ordinal; - /** The ordinal of the packet within the group */ - unsigned int __group_ordinal; - /** The best flow hash IPP could compute. */ - unsigned int __flow_hash; - /** Flags pertaining to checksum calculation, packet type, etc. */ - unsigned int __flags; - /** The first word of "user data". */ - unsigned int __user_data_0; - /** The second word of "user data". */ - unsigned int __user_data_1; -#endif -} -netio_pkt_metadata_t; - - -/** To ensure that the L3 header is aligned mod 4, the L2 header should be - * aligned mod 4 plus 2, since every supported L2 header is 4n + 2 bytes - * long. The standard way to do this is to simply add 2 bytes of padding - * before the L2 header. - */ -#define NETIO_PACKET_PADDING 2 - - - -/** - * @brief Ethernet minimal (egress) packet metadata. - * - * @ingroup egress - * - * This structure represents information about packets which have - * been processed by @ref netio_populate_buffer() or - * @ref netio_populate_prepend_buffer(). This structure is opaque - * and accessed through the @ref egress. - * - * @internal This structure is actually copied into the memory used by - * standard metadata, which is assumed to be large enough. - */ -typedef struct -{ -#ifdef __DOXYGEN__ - /** This structure is opaque. */ - unsigned char opaque[14]; -#else - /** The offset of the L2 header from the start of the packet data. */ - unsigned short l2_offset; - /** The offset of the L3 header from the start of the packet data. */ - unsigned short l3_offset; - /** Where to write the checksum. */ - unsigned char csum_location; - /** Where to start checksumming from. */ - unsigned char csum_start; - /** Flags pertaining to checksum calculation etc. */ - unsigned short flags; - /** The L2 length of the packet. */ - unsigned short l2_length; - /** The checksum with which to seed the checksum generator. */ - unsigned short csum_seed; - /** How much to checksum. */ - unsigned short csum_length; -#endif -} -netio_pkt_minimal_metadata_t; - - -#ifndef __DOXYGEN__ - -/** - * @brief An I/O notification header. - * - * This is the first word of data received from an I/O shim in a notification - * packet. It contains framing and status information. - */ -typedef union -{ - unsigned int word; /**< The whole word. */ - /** The various fields. */ - struct - { - unsigned int __channel:7; /**< Resource channel. */ - unsigned int __type:4; /**< Type. */ - unsigned int __ack:1; /**< Whether an acknowledgement is needed. */ - unsigned int __reserved:1; /**< Reserved. */ - unsigned int __protocol:1; /**< A protocol-specific word is added. */ - unsigned int __status:2; /**< Status of the transfer. */ - unsigned int __framing:2; /**< Framing of the transfer. */ - unsigned int __transfer_size:14; /**< Transfer size in bytes (total). */ - } bits; -} -__netio_pkt_notif_t; - - -/** - * Returns the base address of the packet. - */ -#define _NETIO_PKT_HANDLE_BASE(p) \ - ((unsigned char*)((p).word & 0xFFFFFFC0)) - -/** - * Returns the base address of the packet. - */ -#define _NETIO_PKT_BASE(p) \ - _NETIO_PKT_HANDLE_BASE(p->__packet) - -/** - * @brief An I/O notification packet (second word) - * - * This is the second word of data received from an I/O shim in a notification - * packet. This is the virtual address of the packet buffer, plus some flag - * bits. (The virtual address of the packet is always 256-byte aligned so we - * have room for 8 bits' worth of flags in the low 8 bits.) - * - * @internal - * NOTE: The low two bits must contain "__queue", so the "packet size" - * (SIZE_SMALL, SIZE_LARGE, or SIZE_JUMBO) can be determined quickly. - * - * If __addr or __offset are moved, _NETIO_PKT_BASE - * (defined right below this) must be changed. - */ -typedef union -{ - unsigned int word; /**< The whole word. */ - /** The various fields. */ - struct - { - /** Which queue the packet will be returned to once it is sent back to - the IPP. This is one of the SIZE_xxx values. */ - unsigned int __queue:2; - - /** The IPP handle of the sending IPP. */ - unsigned int __ipp_handle:2; - - /** Reserved for future use. */ - unsigned int __reserved:1; - - /** If 1, this packet has minimal (egress) metadata; otherwise, it - has standard (ingress) metadata. */ - unsigned int __minimal:1; - - /** Offset of the metadata within the packet. This value is multiplied - * by 64 and added to the base packet address to get the metadata - * address. Note that this field is aligned within the word such that - * you can easily extract the metadata address with a 26-bit mask. */ - unsigned int __offset:2; - - /** The top 24 bits of the packet's virtual address. */ - unsigned int __addr:24; - } bits; -} -__netio_pkt_handle_t; - -#endif /* !__DOXYGEN__ */ - - -/** - * @brief A handle for an I/O packet's storage. - * @ingroup ingress - * - * netio_pkt_handle_t encodes the concept of a ::netio_pkt_t with its - * packet metadata removed. It is a much smaller type that exists to - * facilitate applications where the full ::netio_pkt_t type is too - * large, such as those that cache enormous numbers of packets or wish - * to transmit packet descriptors over the UDN. - * - * Because there is no metadata, most ::netio_pkt_t operations cannot be - * performed on a netio_pkt_handle_t. It supports only - * netio_free_handle() (to free the buffer) and - * NETIO_PKT_CUSTOM_DATA_H() (to access a pointer to its contents). - * The application must acquire any additional metadata it wants from the - * original ::netio_pkt_t and record it separately. - * - * A netio_pkt_handle_t can be extracted from a ::netio_pkt_t by calling - * NETIO_PKT_HANDLE(). An invalid handle (analogous to NULL) can be - * created by assigning the value ::NETIO_PKT_HANDLE_NONE. A handle can - * be tested for validity with NETIO_PKT_HANDLE_IS_VALID(). - */ -typedef struct -{ - unsigned int word; /**< Opaque bits. */ -} netio_pkt_handle_t; - -/** - * @brief A packet descriptor. - * - * @ingroup ingress - * @ingroup egress - * - * This data structure represents a packet. The structure is manipulated - * through the @ref ingress and the @ref egress. - * - * While the contents of a netio_pkt_t are opaque, the structure itself is - * portable. This means that it may be shared between all tiles which have - * done a netio_input_register() call for the interface on which the pkt_t - * was initially received (via netio_get_packet()) or retrieved (via - * netio_get_buffer()). The contents of a netio_pkt_t can be transmitted to - * another tile via shared memory, or via a UDN message, or by other means. - * The destination tile may then use the pkt_t as if it had originally been - * received locally; it may read or write the packet's data, read its - * metadata, free the packet, send the packet, transfer the netio_pkt_t to - * yet another tile, and so forth. - * - * Once a netio_pkt_t has been transferred to a second tile, the first tile - * should not reference the original copy; in particular, if more than one - * tile frees or sends the same netio_pkt_t, the IPP's packet free lists will - * become corrupted. Note also that each tile which reads or modifies - * packet data must obey the memory coherency rules outlined in @ref input. - */ -typedef struct -{ -#ifdef __DOXYGEN__ - /** This structure is opaque. */ - unsigned char opaque[32]; -#else - /** For an ingress packet (one with standard metadata), this is the - * notification header we got from the I/O shim. For an egress packet - * (one with minimal metadata), this word is zero if the packet has not - * been populated, and nonzero if it has. */ - __netio_pkt_notif_t __notif_header; - - /** Virtual address of the packet buffer, plus state flags. */ - __netio_pkt_handle_t __packet; - - /** Metadata associated with the packet. */ - netio_pkt_metadata_t __metadata; -#endif -} -netio_pkt_t; - - -#ifndef __DOXYGEN__ - -#define __NETIO_PKT_NOTIF_HEADER(pkt) ((pkt)->__notif_header) -#define __NETIO_PKT_IPP_HANDLE(pkt) ((pkt)->__packet.bits.__ipp_handle) -#define __NETIO_PKT_QUEUE(pkt) ((pkt)->__packet.bits.__queue) -#define __NETIO_PKT_NOTIF_HEADER_M(mda, pkt) ((pkt)->__notif_header) -#define __NETIO_PKT_IPP_HANDLE_M(mda, pkt) ((pkt)->__packet.bits.__ipp_handle) -#define __NETIO_PKT_MINIMAL(pkt) ((pkt)->__packet.bits.__minimal) -#define __NETIO_PKT_QUEUE_M(mda, pkt) ((pkt)->__packet.bits.__queue) -#define __NETIO_PKT_FLAGS_M(mda, pkt) ((mda)->__flags) - -/* Packet information table, used by the attribute access functions below. */ -extern const uint16_t _netio_pkt_info[]; - -#endif /* __DOXYGEN__ */ - - -#ifndef __DOXYGEN__ -/* These macros are deprecated and will disappear in a future MDE release. */ -#define NETIO_PKT_GOOD_CHECKSUM(pkt) \ - NETIO_PKT_L4_CSUM_CORRECT(pkt) -#define NETIO_PKT_GOOD_CHECKSUM_M(mda, pkt) \ - NETIO_PKT_L4_CSUM_CORRECT_M(mda, pkt) -#endif /* __DOXYGEN__ */ - - -/* Packet attribute access functions. */ - -/** Return a pointer to the metadata for a packet. - * @ingroup ingress - * - * Calling this function once and passing the result to other retrieval - * functions with a "_M" suffix usually improves performance. This - * function must be called on an 'ingress' packet (i.e. one retrieved - * by @ref netio_get_packet(), on which @ref netio_populate_buffer() or - * @ref netio_populate_prepend_buffer have not been called). Use of this - * function on an 'egress' packet will cause an assertion failure. - * - * @param[in] pkt Packet on which to operate. - * @return A pointer to the packet's standard metadata. - */ -static __inline netio_pkt_metadata_t* -NETIO_PKT_METADATA(netio_pkt_t* pkt) -{ - netio_assert(!pkt->__packet.bits.__minimal); - return &pkt->__metadata; -} - - -/** Return a pointer to the minimal metadata for a packet. - * @ingroup egress - * - * Calling this function once and passing the result to other retrieval - * functions with a "_MM" suffix usually improves performance. This - * function must be called on an 'egress' packet (i.e. one on which - * @ref netio_populate_buffer() or @ref netio_populate_prepend_buffer() - * have been called, or one retrieved by @ref netio_get_buffer()). Use of - * this function on an 'ingress' packet will cause an assertion failure. - * - * @param[in] pkt Packet on which to operate. - * @return A pointer to the packet's standard metadata. - */ -static __inline netio_pkt_minimal_metadata_t* -NETIO_PKT_MINIMAL_METADATA(netio_pkt_t* pkt) -{ - netio_assert(pkt->__packet.bits.__minimal); - return (netio_pkt_minimal_metadata_t*) &pkt->__metadata; -} - - -/** Determine whether a packet has 'minimal' metadata. - * @ingroup pktfuncs - * - * This function will return nonzero if the packet is an 'egress' - * packet (i.e. one on which @ref netio_populate_buffer() or - * @ref netio_populate_prepend_buffer() have been called, or one - * retrieved by @ref netio_get_buffer()), and zero if the packet - * is an 'ingress' packet (i.e. one retrieved by @ref netio_get_packet(), - * which has not been converted into an 'egress' packet). - * - * @param[in] pkt Packet on which to operate. - * @return Nonzero if the packet has minimal metadata. - */ -static __inline unsigned int -NETIO_PKT_IS_MINIMAL(netio_pkt_t* pkt) -{ - return pkt->__packet.bits.__minimal; -} - - -/** Return a handle for a packet's storage. - * @ingroup pktfuncs - * - * @param[in] pkt Packet on which to operate. - * @return A handle for the packet's storage. - */ -static __inline netio_pkt_handle_t -NETIO_PKT_HANDLE(netio_pkt_t* pkt) -{ - netio_pkt_handle_t h; - h.word = pkt->__packet.word; - return h; -} - - -/** A special reserved value indicating the absence of a packet handle. - * - * @ingroup pktfuncs - */ -#define NETIO_PKT_HANDLE_NONE ((netio_pkt_handle_t) { 0 }) - - -/** Test whether a packet handle is valid. - * - * Applications may wish to use the reserved value NETIO_PKT_HANDLE_NONE - * to indicate no packet at all. This function tests to see if a packet - * handle is a real handle, not this special reserved value. - * - * @ingroup pktfuncs - * - * @param[in] handle Handle on which to operate. - * @return One if the packet handle is valid, else zero. - */ -static __inline unsigned int -NETIO_PKT_HANDLE_IS_VALID(netio_pkt_handle_t handle) -{ - return handle.word != 0; -} - - - -/** Return a pointer to the start of the packet's custom header. - * A custom header may or may not be present, depending upon the IPP; its - * contents and alignment are also IPP-dependent. Currently, none of the - * standard IPPs supplied by Tilera produce a custom header. If present, - * the custom header precedes the L2 header in the packet buffer. - * @ingroup ingress - * - * @param[in] handle Handle on which to operate. - * @return A pointer to start of the packet. - */ -static __inline unsigned char* -NETIO_PKT_CUSTOM_DATA_H(netio_pkt_handle_t handle) -{ - return _NETIO_PKT_HANDLE_BASE(handle) + NETIO_PACKET_PADDING; -} - - -/** Return the length of the packet's custom header. - * A custom header may or may not be present, depending upon the IPP; its - * contents and alignment are also IPP-dependent. Currently, none of the - * standard IPPs supplied by Tilera produce a custom header. If present, - * the custom header precedes the L2 header in the packet buffer. - * - * @ingroup ingress - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return The length of the packet's custom header, in bytes. - */ -static __inline netio_size_t -NETIO_PKT_CUSTOM_HEADER_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - /* - * Note that we effectively need to extract a quantity from the flags word - * which is measured in words, and then turn it into bytes by shifting - * it left by 2. We do this all at once by just shifting right two less - * bits, and shifting the mask up two bits. - */ - return ((mda->__flags >> (_NETIO_PKT_CUSTOM_LEN_SHIFT - 2)) & - (_NETIO_PKT_CUSTOM_LEN_RMASK << 2)); -} - - -/** Return the length of the packet, starting with the custom header. - * A custom header may or may not be present, depending upon the IPP; its - * contents and alignment are also IPP-dependent. Currently, none of the - * standard IPPs supplied by Tilera produce a custom header. If present, - * the custom header precedes the L2 header in the packet buffer. - * @ingroup ingress - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return The length of the packet, in bytes. - */ -static __inline netio_size_t -NETIO_PKT_CUSTOM_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return (__NETIO_PKT_NOTIF_HEADER(pkt).bits.__transfer_size - - NETIO_PACKET_PADDING); -} - - -/** Return a pointer to the start of the packet's custom header. - * A custom header may or may not be present, depending upon the IPP; its - * contents and alignment are also IPP-dependent. Currently, none of the - * standard IPPs supplied by Tilera produce a custom header. If present, - * the custom header precedes the L2 header in the packet buffer. - * @ingroup ingress - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return A pointer to start of the packet. - */ -static __inline unsigned char* -NETIO_PKT_CUSTOM_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return NETIO_PKT_CUSTOM_DATA_H(NETIO_PKT_HANDLE(pkt)); -} - - -/** Return the length of the packet's L2 (Ethernet plus VLAN or SNAP) header. - * @ingroup ingress - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return The length of the packet's L2 header, in bytes. - */ -static __inline netio_size_t -NETIO_PKT_L2_HEADER_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - /* - * Note that we effectively need to extract a quantity from the flags word - * which is measured in words, and then turn it into bytes by shifting - * it left by 2. We do this all at once by just shifting right two less - * bits, and shifting the mask up two bits. We then add two bytes. - */ - return ((mda->__flags >> (_NETIO_PKT_L2_LEN_SHIFT - 2)) & - (_NETIO_PKT_L2_LEN_RMASK << 2)) + 2; -} - - -/** Return the length of the packet, starting with the L2 (Ethernet) header. - * @ingroup ingress - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return The length of the packet, in bytes. - */ -static __inline netio_size_t -NETIO_PKT_L2_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return (NETIO_PKT_CUSTOM_LENGTH_M(mda, pkt) - - NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda,pkt)); -} - - -/** Return a pointer to the start of the packet's L2 (Ethernet) header. - * @ingroup ingress - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return A pointer to start of the packet. - */ -static __inline unsigned char* -NETIO_PKT_L2_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return (NETIO_PKT_CUSTOM_DATA_M(mda, pkt) + - NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt)); -} - - -/** Retrieve the length of the packet, starting with the L3 (generally, - * the IP) header. - * @ingroup ingress - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return Length of the packet's L3 header and data, in bytes. - */ -static __inline netio_size_t -NETIO_PKT_L3_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return (NETIO_PKT_L2_LENGTH_M(mda, pkt) - - NETIO_PKT_L2_HEADER_LENGTH_M(mda,pkt)); -} - - -/** Return a pointer to the packet's L3 (generally, the IP) header. - * @ingroup ingress - * - * Note that we guarantee word alignment of the L3 header. - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return A pointer to the packet's L3 header. - */ -static __inline unsigned char* -NETIO_PKT_L3_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return (NETIO_PKT_L2_DATA_M(mda, pkt) + - NETIO_PKT_L2_HEADER_LENGTH_M(mda, pkt)); -} - - -/** Return the ordinal of the packet. - * @ingroup ingress - * - * Each packet is given an ordinal number when it is delivered by the IPP. - * In the medium term, the ordinal is unique and monotonically increasing, - * being incremented by 1 for each packet; the ordinal of the first packet - * delivered after the IPP starts is zero. (Since the ordinal is of finite - * size, given enough input packets, it will eventually wrap around to zero; - * in the long term, therefore, ordinals are not unique.) The ordinals - * handed out by different IPPs are not disjoint, so two packets from - * different IPPs may have identical ordinals. Packets dropped by the - * IPP or by the I/O shim are not assigned ordinals. - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return The packet's per-IPP packet ordinal. - */ -static __inline unsigned int -NETIO_PKT_ORDINAL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return mda->__packet_ordinal; -} - - -/** Return the per-group ordinal of the packet. - * @ingroup ingress - * - * Each packet is given a per-group ordinal number when it is - * delivered by the IPP. By default, the group is the packet's VLAN, - * although IPP can be recompiled to use different values. In - * the medium term, the ordinal is unique and monotonically - * increasing, being incremented by 1 for each packet; the ordinal of - * the first packet distributed to a particular group is zero. - * (Since the ordinal is of finite size, given enough input packets, - * it will eventually wrap around to zero; in the long term, - * therefore, ordinals are not unique.) The ordinals handed out by - * different IPPs are not disjoint, so two packets from different IPPs - * may have identical ordinals; similarly, packets distributed to - * different groups may have identical ordinals. Packets dropped by - * the IPP or by the I/O shim are not assigned ordinals. - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return The packet's per-IPP, per-group ordinal. - */ -static __inline unsigned int -NETIO_PKT_GROUP_ORDINAL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return mda->__group_ordinal; -} - - -/** Return the VLAN ID assigned to the packet. - * @ingroup ingress - * - * This value is usually contained within the packet header. - * - * This value will be zero if the packet does not have a VLAN tag, or if - * this value was not extracted from the packet. - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return The packet's VLAN ID. - */ -static __inline unsigned short -NETIO_PKT_VLAN_ID_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - int vl = (mda->__flags >> _NETIO_PKT_VLAN_SHIFT) & _NETIO_PKT_VLAN_RMASK; - unsigned short* pkt_p; - int index; - unsigned short val; - - if (vl == _NETIO_PKT_VLAN_NONE) - return 0; - - pkt_p = (unsigned short*) NETIO_PKT_L2_DATA_M(mda, pkt); - index = (mda->__flags >> _NETIO_PKT_TYPE_SHIFT) & _NETIO_PKT_TYPE_RMASK; - - val = pkt_p[(_netio_pkt_info[index] >> _NETIO_PKT_INFO_VLAN_SHIFT) & - _NETIO_PKT_INFO_VLAN_RMASK]; - -#ifdef __TILECC__ - return (__insn_bytex(val) >> 16) & 0xFFF; -#else - return (__builtin_bswap32(val) >> 16) & 0xFFF; -#endif -} - - -/** Return the ethertype of the packet. - * @ingroup ingress - * - * This value is usually contained within the packet header. - * - * This value is reliable if @ref NETIO_PKT_ETHERTYPE_RECOGNIZED_M() - * returns true, and otherwise, may not be well defined. - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return The packet's ethertype. - */ -static __inline unsigned short -NETIO_PKT_ETHERTYPE_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - unsigned short* pkt_p = (unsigned short*) NETIO_PKT_L2_DATA_M(mda, pkt); - int index = (mda->__flags >> _NETIO_PKT_TYPE_SHIFT) & _NETIO_PKT_TYPE_RMASK; - - unsigned short val = - pkt_p[(_netio_pkt_info[index] >> _NETIO_PKT_INFO_ETYPE_SHIFT) & - _NETIO_PKT_INFO_ETYPE_RMASK]; - - return __builtin_bswap32(val) >> 16; -} - - -/** Return the flow hash computed on the packet. - * @ingroup ingress - * - * For TCP and UDP packets, this hash is calculated by hashing together - * the "5-tuple" values, specifically the source IP address, destination - * IP address, protocol type, source port and destination port. - * The hash value is intended to be helpful for millions of distinct - * flows. - * - * For IPv4 or IPv6 packets which are neither TCP nor UDP, the flow hash is - * derived by hashing together the source and destination IP addresses. - * - * For MPLS-encapsulated packets, the flow hash is derived by hashing - * the first MPLS label. - * - * For all other packets the flow hash is computed from the source - * and destination Ethernet addresses. - * - * The hash is symmetric, meaning it produces the same value if the - * source and destination are swapped. The only exceptions are - * tunneling protocols 0x04 (IP in IP Encapsulation), 0x29 (Simple - * Internet Protocol), 0x2F (General Routing Encapsulation) and 0x32 - * (Encap Security Payload), which use only the destination address - * since the source address is not meaningful. - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return The packet's 32-bit flow hash. - */ -static __inline unsigned int -NETIO_PKT_FLOW_HASH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return mda->__flow_hash; -} - - -/** Return the first word of "user data" for the packet. - * - * The contents of the user data words depend on the IPP. - * - * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the first - * word of user data contains the least significant bits of the 64-bit - * arrival cycle count (see @c get_cycle_count_low()). - * - * See the <em>System Programmer's Guide</em> for details. - * - * @ingroup ingress - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return The packet's first word of "user data". - */ -static __inline unsigned int -NETIO_PKT_USER_DATA_0_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return mda->__user_data_0; -} - - -/** Return the second word of "user data" for the packet. - * - * The contents of the user data words depend on the IPP. - * - * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the second - * word of user data contains the most significant bits of the 64-bit - * arrival cycle count (see @c get_cycle_count_high()). - * - * See the <em>System Programmer's Guide</em> for details. - * - * @ingroup ingress - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return The packet's second word of "user data". - */ -static __inline unsigned int -NETIO_PKT_USER_DATA_1_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return mda->__user_data_1; -} - - -/** Determine whether the L4 (TCP/UDP) checksum was calculated. - * @ingroup ingress - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return Nonzero if the L4 checksum was calculated. - */ -static __inline unsigned int -NETIO_PKT_L4_CSUM_CALCULATED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return !(mda->__flags & _NETIO_PKT_NO_L4_CSUM_MASK); -} - - -/** Determine whether the L4 (TCP/UDP) checksum was calculated and found to - * be correct. - * @ingroup ingress - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return Nonzero if the checksum was calculated and is correct. - */ -static __inline unsigned int -NETIO_PKT_L4_CSUM_CORRECT_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return !(mda->__flags & - (_NETIO_PKT_BAD_L4_CSUM_MASK | _NETIO_PKT_NO_L4_CSUM_MASK)); -} - - -/** Determine whether the L3 (IP) checksum was calculated. - * @ingroup ingress - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return Nonzero if the L3 (IP) checksum was calculated. -*/ -static __inline unsigned int -NETIO_PKT_L3_CSUM_CALCULATED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return !(mda->__flags & _NETIO_PKT_NO_L3_CSUM_MASK); -} - - -/** Determine whether the L3 (IP) checksum was calculated and found to be - * correct. - * @ingroup ingress - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return Nonzero if the checksum was calculated and is correct. - */ -static __inline unsigned int -NETIO_PKT_L3_CSUM_CORRECT_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return !(mda->__flags & - (_NETIO_PKT_BAD_L3_CSUM_MASK | _NETIO_PKT_NO_L3_CSUM_MASK)); -} - - -/** Determine whether the ethertype was recognized and L3 packet data was - * processed. - * @ingroup ingress - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return Nonzero if the ethertype was recognized and L3 packet data was - * processed. - */ -static __inline unsigned int -NETIO_PKT_ETHERTYPE_RECOGNIZED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return !(mda->__flags & _NETIO_PKT_TYPE_UNRECOGNIZED_MASK); -} - - -/** Retrieve the status of a packet and any errors that may have occurred - * during ingress processing (length mismatches, CRC errors, etc.). - * @ingroup ingress - * - * Note that packets for which @ref NETIO_PKT_ETHERTYPE_RECOGNIZED() - * returns zero are always reported as underlength, as there is no a priori - * means to determine their length. Normally, applications should use - * @ref NETIO_PKT_BAD_M() instead of explicitly checking status with this - * function. - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return The packet's status. - */ -static __inline netio_pkt_status_t -NETIO_PKT_STATUS_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return (netio_pkt_status_t) __NETIO_PKT_NOTIF_HEADER(pkt).bits.__status; -} - - -/** Report whether a packet is bad (i.e., was shorter than expected based on - * its headers, or had a bad CRC). - * @ingroup ingress - * - * Note that this function does not verify L3 or L4 checksums. - * - * @param[in] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - * @return Nonzero if the packet is bad and should be discarded. - */ -static __inline unsigned int -NETIO_PKT_BAD_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return ((NETIO_PKT_STATUS_M(mda, pkt) & 1) && - (NETIO_PKT_ETHERTYPE_RECOGNIZED_M(mda, pkt) || - NETIO_PKT_STATUS_M(mda, pkt) == NETIO_PKT_STATUS_BAD)); -} - - -/** Return the length of the packet, starting with the L2 (Ethernet) header. - * @ingroup egress - * - * @param[in] mmd Pointer to packet's minimal metadata. - * @param[in] pkt Packet on which to operate. - * @return The length of the packet, in bytes. - */ -static __inline netio_size_t -NETIO_PKT_L2_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt) -{ - return mmd->l2_length; -} - - -/** Return the length of the L2 (Ethernet) header. - * @ingroup egress - * - * @param[in] mmd Pointer to packet's minimal metadata. - * @param[in] pkt Packet on which to operate. - * @return The length of the packet's L2 header, in bytes. - */ -static __inline netio_size_t -NETIO_PKT_L2_HEADER_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, - netio_pkt_t* pkt) -{ - return mmd->l3_offset - mmd->l2_offset; -} - - -/** Return the length of the packet, starting with the L3 (IP) header. - * @ingroup egress - * - * @param[in] mmd Pointer to packet's minimal metadata. - * @param[in] pkt Packet on which to operate. - * @return Length of the packet's L3 header and data, in bytes. - */ -static __inline netio_size_t -NETIO_PKT_L3_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt) -{ - return (NETIO_PKT_L2_LENGTH_MM(mmd, pkt) - - NETIO_PKT_L2_HEADER_LENGTH_MM(mmd, pkt)); -} - - -/** Return a pointer to the packet's L3 (generally, the IP) header. - * @ingroup egress - * - * Note that we guarantee word alignment of the L3 header. - * - * @param[in] mmd Pointer to packet's minimal metadata. - * @param[in] pkt Packet on which to operate. - * @return A pointer to the packet's L3 header. - */ -static __inline unsigned char* -NETIO_PKT_L3_DATA_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt) -{ - return _NETIO_PKT_BASE(pkt) + mmd->l3_offset; -} - - -/** Return a pointer to the packet's L2 (Ethernet) header. - * @ingroup egress - * - * @param[in] mmd Pointer to packet's minimal metadata. - * @param[in] pkt Packet on which to operate. - * @return A pointer to start of the packet. - */ -static __inline unsigned char* -NETIO_PKT_L2_DATA_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt) -{ - return _NETIO_PKT_BASE(pkt) + mmd->l2_offset; -} - - -/** Retrieve the status of a packet and any errors that may have occurred - * during ingress processing (length mismatches, CRC errors, etc.). - * @ingroup ingress - * - * Note that packets for which @ref NETIO_PKT_ETHERTYPE_RECOGNIZED() - * returns zero are always reported as underlength, as there is no a priori - * means to determine their length. Normally, applications should use - * @ref NETIO_PKT_BAD() instead of explicitly checking status with this - * function. - * - * @param[in] pkt Packet on which to operate. - * @return The packet's status. - */ -static __inline netio_pkt_status_t -NETIO_PKT_STATUS(netio_pkt_t* pkt) -{ - netio_assert(!pkt->__packet.bits.__minimal); - - return (netio_pkt_status_t) __NETIO_PKT_NOTIF_HEADER(pkt).bits.__status; -} - - -/** Report whether a packet is bad (i.e., was shorter than expected based on - * its headers, or had a bad CRC). - * @ingroup ingress - * - * Note that this function does not verify L3 or L4 checksums. - * - * @param[in] pkt Packet on which to operate. - * @return Nonzero if the packet is bad and should be discarded. - */ -static __inline unsigned int -NETIO_PKT_BAD(netio_pkt_t* pkt) -{ - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_BAD_M(mda, pkt); -} - - -/** Return the length of the packet's custom header. - * A custom header may or may not be present, depending upon the IPP; its - * contents and alignment are also IPP-dependent. Currently, none of the - * standard IPPs supplied by Tilera produce a custom header. If present, - * the custom header precedes the L2 header in the packet buffer. - * @ingroup pktfuncs - * - * @param[in] pkt Packet on which to operate. - * @return The length of the packet's custom header, in bytes. - */ -static __inline netio_size_t -NETIO_PKT_CUSTOM_HEADER_LENGTH(netio_pkt_t* pkt) -{ - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt); -} - - -/** Return the length of the packet, starting with the custom header. - * A custom header may or may not be present, depending upon the IPP; its - * contents and alignment are also IPP-dependent. Currently, none of the - * standard IPPs supplied by Tilera produce a custom header. If present, - * the custom header precedes the L2 header in the packet buffer. - * @ingroup pktfuncs - * - * @param[in] pkt Packet on which to operate. - * @return The length of the packet, in bytes. - */ -static __inline netio_size_t -NETIO_PKT_CUSTOM_LENGTH(netio_pkt_t* pkt) -{ - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_CUSTOM_LENGTH_M(mda, pkt); -} - - -/** Return a pointer to the packet's custom header. - * A custom header may or may not be present, depending upon the IPP; its - * contents and alignment are also IPP-dependent. Currently, none of the - * standard IPPs supplied by Tilera produce a custom header. If present, - * the custom header precedes the L2 header in the packet buffer. - * @ingroup pktfuncs - * - * @param[in] pkt Packet on which to operate. - * @return A pointer to start of the packet. - */ -static __inline unsigned char* -NETIO_PKT_CUSTOM_DATA(netio_pkt_t* pkt) -{ - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_CUSTOM_DATA_M(mda, pkt); -} - - -/** Return the length of the packet's L2 (Ethernet plus VLAN or SNAP) header. - * @ingroup pktfuncs - * - * @param[in] pkt Packet on which to operate. - * @return The length of the packet's L2 header, in bytes. - */ -static __inline netio_size_t -NETIO_PKT_L2_HEADER_LENGTH(netio_pkt_t* pkt) -{ - if (NETIO_PKT_IS_MINIMAL(pkt)) - { - netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt); - - return NETIO_PKT_L2_HEADER_LENGTH_MM(mmd, pkt); - } - else - { - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_L2_HEADER_LENGTH_M(mda, pkt); - } -} - - -/** Return the length of the packet, starting with the L2 (Ethernet) header. - * @ingroup pktfuncs - * - * @param[in] pkt Packet on which to operate. - * @return The length of the packet, in bytes. - */ -static __inline netio_size_t -NETIO_PKT_L2_LENGTH(netio_pkt_t* pkt) -{ - if (NETIO_PKT_IS_MINIMAL(pkt)) - { - netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt); - - return NETIO_PKT_L2_LENGTH_MM(mmd, pkt); - } - else - { - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_L2_LENGTH_M(mda, pkt); - } -} - - -/** Return a pointer to the packet's L2 (Ethernet) header. - * @ingroup pktfuncs - * - * @param[in] pkt Packet on which to operate. - * @return A pointer to start of the packet. - */ -static __inline unsigned char* -NETIO_PKT_L2_DATA(netio_pkt_t* pkt) -{ - if (NETIO_PKT_IS_MINIMAL(pkt)) - { - netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt); - - return NETIO_PKT_L2_DATA_MM(mmd, pkt); - } - else - { - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_L2_DATA_M(mda, pkt); - } -} - - -/** Retrieve the length of the packet, starting with the L3 (generally, the IP) - * header. - * @ingroup pktfuncs - * - * @param[in] pkt Packet on which to operate. - * @return Length of the packet's L3 header and data, in bytes. - */ -static __inline netio_size_t -NETIO_PKT_L3_LENGTH(netio_pkt_t* pkt) -{ - if (NETIO_PKT_IS_MINIMAL(pkt)) - { - netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt); - - return NETIO_PKT_L3_LENGTH_MM(mmd, pkt); - } - else - { - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_L3_LENGTH_M(mda, pkt); - } -} - - -/** Return a pointer to the packet's L3 (generally, the IP) header. - * @ingroup pktfuncs - * - * Note that we guarantee word alignment of the L3 header. - * - * @param[in] pkt Packet on which to operate. - * @return A pointer to the packet's L3 header. - */ -static __inline unsigned char* -NETIO_PKT_L3_DATA(netio_pkt_t* pkt) -{ - if (NETIO_PKT_IS_MINIMAL(pkt)) - { - netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt); - - return NETIO_PKT_L3_DATA_MM(mmd, pkt); - } - else - { - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_L3_DATA_M(mda, pkt); - } -} - - -/** Return the ordinal of the packet. - * @ingroup ingress - * - * Each packet is given an ordinal number when it is delivered by the IPP. - * In the medium term, the ordinal is unique and monotonically increasing, - * being incremented by 1 for each packet; the ordinal of the first packet - * delivered after the IPP starts is zero. (Since the ordinal is of finite - * size, given enough input packets, it will eventually wrap around to zero; - * in the long term, therefore, ordinals are not unique.) The ordinals - * handed out by different IPPs are not disjoint, so two packets from - * different IPPs may have identical ordinals. Packets dropped by the - * IPP or by the I/O shim are not assigned ordinals. - * - * - * @param[in] pkt Packet on which to operate. - * @return The packet's per-IPP packet ordinal. - */ -static __inline unsigned int -NETIO_PKT_ORDINAL(netio_pkt_t* pkt) -{ - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_ORDINAL_M(mda, pkt); -} - - -/** Return the per-group ordinal of the packet. - * @ingroup ingress - * - * Each packet is given a per-group ordinal number when it is - * delivered by the IPP. By default, the group is the packet's VLAN, - * although IPP can be recompiled to use different values. In - * the medium term, the ordinal is unique and monotonically - * increasing, being incremented by 1 for each packet; the ordinal of - * the first packet distributed to a particular group is zero. - * (Since the ordinal is of finite size, given enough input packets, - * it will eventually wrap around to zero; in the long term, - * therefore, ordinals are not unique.) The ordinals handed out by - * different IPPs are not disjoint, so two packets from different IPPs - * may have identical ordinals; similarly, packets distributed to - * different groups may have identical ordinals. Packets dropped by - * the IPP or by the I/O shim are not assigned ordinals. - * - * @param[in] pkt Packet on which to operate. - * @return The packet's per-IPP, per-group ordinal. - */ -static __inline unsigned int -NETIO_PKT_GROUP_ORDINAL(netio_pkt_t* pkt) -{ - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_GROUP_ORDINAL_M(mda, pkt); -} - - -/** Return the VLAN ID assigned to the packet. - * @ingroup ingress - * - * This is usually also contained within the packet header. If the packet - * does not have a VLAN tag, the VLAN ID returned by this function is zero. - * - * @param[in] pkt Packet on which to operate. - * @return The packet's VLAN ID. - */ -static __inline unsigned short -NETIO_PKT_VLAN_ID(netio_pkt_t* pkt) -{ - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_VLAN_ID_M(mda, pkt); -} - - -/** Return the ethertype of the packet. - * @ingroup ingress - * - * This value is reliable if @ref NETIO_PKT_ETHERTYPE_RECOGNIZED() - * returns true, and otherwise, may not be well defined. - * - * @param[in] pkt Packet on which to operate. - * @return The packet's ethertype. - */ -static __inline unsigned short -NETIO_PKT_ETHERTYPE(netio_pkt_t* pkt) -{ - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_ETHERTYPE_M(mda, pkt); -} - - -/** Return the flow hash computed on the packet. - * @ingroup ingress - * - * For TCP and UDP packets, this hash is calculated by hashing together - * the "5-tuple" values, specifically the source IP address, destination - * IP address, protocol type, source port and destination port. - * The hash value is intended to be helpful for millions of distinct - * flows. - * - * For IPv4 or IPv6 packets which are neither TCP nor UDP, the flow hash is - * derived by hashing together the source and destination IP addresses. - * - * For MPLS-encapsulated packets, the flow hash is derived by hashing - * the first MPLS label. - * - * For all other packets the flow hash is computed from the source - * and destination Ethernet addresses. - * - * The hash is symmetric, meaning it produces the same value if the - * source and destination are swapped. The only exceptions are - * tunneling protocols 0x04 (IP in IP Encapsulation), 0x29 (Simple - * Internet Protocol), 0x2F (General Routing Encapsulation) and 0x32 - * (Encap Security Payload), which use only the destination address - * since the source address is not meaningful. - * - * @param[in] pkt Packet on which to operate. - * @return The packet's 32-bit flow hash. - */ -static __inline unsigned int -NETIO_PKT_FLOW_HASH(netio_pkt_t* pkt) -{ - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_FLOW_HASH_M(mda, pkt); -} - - -/** Return the first word of "user data" for the packet. - * - * The contents of the user data words depend on the IPP. - * - * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the first - * word of user data contains the least significant bits of the 64-bit - * arrival cycle count (see @c get_cycle_count_low()). - * - * See the <em>System Programmer's Guide</em> for details. - * - * @ingroup ingress - * - * @param[in] pkt Packet on which to operate. - * @return The packet's first word of "user data". - */ -static __inline unsigned int -NETIO_PKT_USER_DATA_0(netio_pkt_t* pkt) -{ - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_USER_DATA_0_M(mda, pkt); -} - - -/** Return the second word of "user data" for the packet. - * - * The contents of the user data words depend on the IPP. - * - * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the second - * word of user data contains the most significant bits of the 64-bit - * arrival cycle count (see @c get_cycle_count_high()). - * - * See the <em>System Programmer's Guide</em> for details. - * - * @ingroup ingress - * - * @param[in] pkt Packet on which to operate. - * @return The packet's second word of "user data". - */ -static __inline unsigned int -NETIO_PKT_USER_DATA_1(netio_pkt_t* pkt) -{ - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_USER_DATA_1_M(mda, pkt); -} - - -/** Determine whether the L4 (TCP/UDP) checksum was calculated. - * @ingroup ingress - * - * @param[in] pkt Packet on which to operate. - * @return Nonzero if the L4 checksum was calculated. - */ -static __inline unsigned int -NETIO_PKT_L4_CSUM_CALCULATED(netio_pkt_t* pkt) -{ - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_L4_CSUM_CALCULATED_M(mda, pkt); -} - - -/** Determine whether the L4 (TCP/UDP) checksum was calculated and found to - * be correct. - * @ingroup ingress - * - * @param[in] pkt Packet on which to operate. - * @return Nonzero if the checksum was calculated and is correct. - */ -static __inline unsigned int -NETIO_PKT_L4_CSUM_CORRECT(netio_pkt_t* pkt) -{ - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_L4_CSUM_CORRECT_M(mda, pkt); -} - - -/** Determine whether the L3 (IP) checksum was calculated. - * @ingroup ingress - * - * @param[in] pkt Packet on which to operate. - * @return Nonzero if the L3 (IP) checksum was calculated. -*/ -static __inline unsigned int -NETIO_PKT_L3_CSUM_CALCULATED(netio_pkt_t* pkt) -{ - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_L3_CSUM_CALCULATED_M(mda, pkt); -} - - -/** Determine whether the L3 (IP) checksum was calculated and found to be - * correct. - * @ingroup ingress - * - * @param[in] pkt Packet on which to operate. - * @return Nonzero if the checksum was calculated and is correct. - */ -static __inline unsigned int -NETIO_PKT_L3_CSUM_CORRECT(netio_pkt_t* pkt) -{ - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_L3_CSUM_CORRECT_M(mda, pkt); -} - - -/** Determine whether the Ethertype was recognized and L3 packet data was - * processed. - * @ingroup ingress - * - * @param[in] pkt Packet on which to operate. - * @return Nonzero if the Ethertype was recognized and L3 packet data was - * processed. - */ -static __inline unsigned int -NETIO_PKT_ETHERTYPE_RECOGNIZED(netio_pkt_t* pkt) -{ - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_ETHERTYPE_RECOGNIZED_M(mda, pkt); -} - - -/** Set an egress packet's L2 length, using a metadata pointer to speed the - * computation. - * @ingroup egress - * - * @param[in,out] mmd Pointer to packet's minimal metadata. - * @param[in] pkt Packet on which to operate. - * @param[in] len Packet L2 length, in bytes. - */ -static __inline void -NETIO_PKT_SET_L2_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt, - int len) -{ - mmd->l2_length = len; -} - - -/** Set an egress packet's L2 length. - * @ingroup egress - * - * @param[in,out] pkt Packet on which to operate. - * @param[in] len Packet L2 length, in bytes. - */ -static __inline void -NETIO_PKT_SET_L2_LENGTH(netio_pkt_t* pkt, int len) -{ - netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt); - - NETIO_PKT_SET_L2_LENGTH_MM(mmd, pkt, len); -} - - -/** Set an egress packet's L2 header length, using a metadata pointer to - * speed the computation. - * @ingroup egress - * - * It is not normally necessary to call this routine; only the L2 length, - * not the header length, is needed to transmit a packet. It may be useful if - * the egress packet will later be processed by code which expects to use - * functions like @ref NETIO_PKT_L3_DATA() to get a pointer to the L3 payload. - * - * @param[in,out] mmd Pointer to packet's minimal metadata. - * @param[in] pkt Packet on which to operate. - * @param[in] len Packet L2 header length, in bytes. - */ -static __inline void -NETIO_PKT_SET_L2_HEADER_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, - netio_pkt_t* pkt, int len) -{ - mmd->l3_offset = mmd->l2_offset + len; -} - - -/** Set an egress packet's L2 header length. - * @ingroup egress - * - * It is not normally necessary to call this routine; only the L2 length, - * not the header length, is needed to transmit a packet. It may be useful if - * the egress packet will later be processed by code which expects to use - * functions like @ref NETIO_PKT_L3_DATA() to get a pointer to the L3 payload. - * - * @param[in,out] pkt Packet on which to operate. - * @param[in] len Packet L2 header length, in bytes. - */ -static __inline void -NETIO_PKT_SET_L2_HEADER_LENGTH(netio_pkt_t* pkt, int len) -{ - netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt); - - NETIO_PKT_SET_L2_HEADER_LENGTH_MM(mmd, pkt, len); -} - - -/** Set up an egress packet for hardware checksum computation, using a - * metadata pointer to speed the operation. - * @ingroup egress - * - * NetIO provides the ability to automatically calculate a standard - * 16-bit Internet checksum on transmitted packets. The application - * may specify the point in the packet where the checksum starts, the - * number of bytes to be checksummed, and the two bytes in the packet - * which will be replaced with the completed checksum. (If the range - * of bytes to be checksummed includes the bytes to be replaced, the - * initial values of those bytes will be included in the checksum.) - * - * For some protocols, the packet checksum covers data which is not present - * in the packet, or is at least not contiguous to the main data payload. - * For instance, the TCP checksum includes a "pseudo-header" which includes - * the source and destination IP addresses of the packet. To accommodate - * this, the checksum engine may be "seeded" with an initial value, which - * the application would need to compute based on the specific protocol's - * requirements. Note that the seed is given in host byte order (little- - * endian), not network byte order (big-endian); code written to compute a - * pseudo-header checksum in network byte order will need to byte-swap it - * before use as the seed. - * - * Note that the checksum is computed as part of the transmission process, - * so it will not be present in the packet upon completion of this routine. - * - * @param[in,out] mmd Pointer to packet's minimal metadata. - * @param[in] pkt Packet on which to operate. - * @param[in] start Offset within L2 packet of the first byte to include in - * the checksum. - * @param[in] length Number of bytes to include in the checksum. - * the checksum. - * @param[in] location Offset within L2 packet of the first of the two bytes - * to be replaced with the calculated checksum. - * @param[in] seed Initial value of the running checksum before any of the - * packet data is added. - */ -static __inline void -NETIO_PKT_DO_EGRESS_CSUM_MM(netio_pkt_minimal_metadata_t* mmd, - netio_pkt_t* pkt, int start, int length, - int location, uint16_t seed) -{ - mmd->csum_start = start; - mmd->csum_length = length; - mmd->csum_location = location; - mmd->csum_seed = seed; - mmd->flags |= _NETIO_PKT_NEED_EDMA_CSUM_MASK; -} - - -/** Set up an egress packet for hardware checksum computation. - * @ingroup egress - * - * NetIO provides the ability to automatically calculate a standard - * 16-bit Internet checksum on transmitted packets. The application - * may specify the point in the packet where the checksum starts, the - * number of bytes to be checksummed, and the two bytes in the packet - * which will be replaced with the completed checksum. (If the range - * of bytes to be checksummed includes the bytes to be replaced, the - * initial values of those bytes will be included in the checksum.) - * - * For some protocols, the packet checksum covers data which is not present - * in the packet, or is at least not contiguous to the main data payload. - * For instance, the TCP checksum includes a "pseudo-header" which includes - * the source and destination IP addresses of the packet. To accommodate - * this, the checksum engine may be "seeded" with an initial value, which - * the application would need to compute based on the specific protocol's - * requirements. Note that the seed is given in host byte order (little- - * endian), not network byte order (big-endian); code written to compute a - * pseudo-header checksum in network byte order will need to byte-swap it - * before use as the seed. - * - * Note that the checksum is computed as part of the transmission process, - * so it will not be present in the packet upon completion of this routine. - * - * @param[in,out] pkt Packet on which to operate. - * @param[in] start Offset within L2 packet of the first byte to include in - * the checksum. - * @param[in] length Number of bytes to include in the checksum. - * the checksum. - * @param[in] location Offset within L2 packet of the first of the two bytes - * to be replaced with the calculated checksum. - * @param[in] seed Initial value of the running checksum before any of the - * packet data is added. - */ -static __inline void -NETIO_PKT_DO_EGRESS_CSUM(netio_pkt_t* pkt, int start, int length, - int location, uint16_t seed) -{ - netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt); - - NETIO_PKT_DO_EGRESS_CSUM_MM(mmd, pkt, start, length, location, seed); -} - - -/** Return the number of bytes which could be prepended to a packet, using a - * metadata pointer to speed the operation. - * See @ref netio_populate_prepend_buffer() to get a full description of - * prepending. - * - * @param[in,out] mda Pointer to packet's standard metadata. - * @param[in] pkt Packet on which to operate. - */ -static __inline int -NETIO_PKT_PREPEND_AVAIL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ - return (pkt->__packet.bits.__offset << 6) + - NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt); -} - - -/** Return the number of bytes which could be prepended to a packet, using a - * metadata pointer to speed the operation. - * See @ref netio_populate_prepend_buffer() to get a full description of - * prepending. - * @ingroup egress - * - * @param[in,out] mmd Pointer to packet's minimal metadata. - * @param[in] pkt Packet on which to operate. - */ -static __inline int -NETIO_PKT_PREPEND_AVAIL_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt) -{ - return (pkt->__packet.bits.__offset << 6) + mmd->l2_offset; -} - - -/** Return the number of bytes which could be prepended to a packet. - * See @ref netio_populate_prepend_buffer() to get a full description of - * prepending. - * @ingroup egress - * - * @param[in] pkt Packet on which to operate. - */ -static __inline int -NETIO_PKT_PREPEND_AVAIL(netio_pkt_t* pkt) -{ - if (NETIO_PKT_IS_MINIMAL(pkt)) - { - netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt); - - return NETIO_PKT_PREPEND_AVAIL_MM(mmd, pkt); - } - else - { - netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); - - return NETIO_PKT_PREPEND_AVAIL_M(mda, pkt); - } -} - - -/** Flush a packet's minimal metadata from the cache, using a metadata pointer - * to speed the operation. - * @ingroup egress - * - * @param[in] mmd Pointer to packet's minimal metadata. - * @param[in] pkt Packet on which to operate. - */ -static __inline void -NETIO_PKT_FLUSH_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd, - netio_pkt_t* pkt) -{ -} - - -/** Invalidate a packet's minimal metadata from the cache, using a metadata - * pointer to speed the operation. - * @ingroup egress - * - * @param[in] mmd Pointer to packet's minimal metadata. - * @param[in] pkt Packet on which to operate. - */ -static __inline void -NETIO_PKT_INV_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd, - netio_pkt_t* pkt) -{ -} - - -/** Flush and then invalidate a packet's minimal metadata from the cache, - * using a metadata pointer to speed the operation. - * @ingroup egress - * - * @param[in] mmd Pointer to packet's minimal metadata. - * @param[in] pkt Packet on which to operate. - */ -static __inline void -NETIO_PKT_FLUSH_INV_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd, - netio_pkt_t* pkt) -{ -} - - -/** Flush a packet's metadata from the cache, using a metadata pointer - * to speed the operation. - * @ingroup ingress - * - * @param[in] mda Pointer to packet's minimal metadata. - * @param[in] pkt Packet on which to operate. - */ -static __inline void -NETIO_PKT_FLUSH_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ -} - - -/** Invalidate a packet's metadata from the cache, using a metadata - * pointer to speed the operation. - * @ingroup ingress - * - * @param[in] mda Pointer to packet's metadata. - * @param[in] pkt Packet on which to operate. - */ -static __inline void -NETIO_PKT_INV_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ -} - - -/** Flush and then invalidate a packet's metadata from the cache, - * using a metadata pointer to speed the operation. - * @ingroup ingress - * - * @param[in] mda Pointer to packet's metadata. - * @param[in] pkt Packet on which to operate. - */ -static __inline void -NETIO_PKT_FLUSH_INV_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) -{ -} - - -/** Flush a packet's minimal metadata from the cache. - * @ingroup egress - * - * @param[in] pkt Packet on which to operate. - */ -static __inline void -NETIO_PKT_FLUSH_MINIMAL_METADATA(netio_pkt_t* pkt) -{ -} - - -/** Invalidate a packet's minimal metadata from the cache. - * @ingroup egress - * - * @param[in] pkt Packet on which to operate. - */ -static __inline void -NETIO_PKT_INV_MINIMAL_METADATA(netio_pkt_t* pkt) -{ -} - - -/** Flush and then invalidate a packet's minimal metadata from the cache. - * @ingroup egress - * - * @param[in] pkt Packet on which to operate. - */ -static __inline void -NETIO_PKT_FLUSH_INV_MINIMAL_METADATA(netio_pkt_t* pkt) -{ -} - - -/** Flush a packet's metadata from the cache. - * @ingroup ingress - * - * @param[in] pkt Packet on which to operate. - */ -static __inline void -NETIO_PKT_FLUSH_METADATA(netio_pkt_t* pkt) -{ -} - - -/** Invalidate a packet's metadata from the cache. - * @ingroup ingress - * - * @param[in] pkt Packet on which to operate. - */ -static __inline void -NETIO_PKT_INV_METADATA(netio_pkt_t* pkt) -{ -} - - -/** Flush and then invalidate a packet's metadata from the cache. - * @ingroup ingress - * - * @param[in] pkt Packet on which to operate. - */ -static __inline void -NETIO_PKT_FLUSH_INV_METADATA(netio_pkt_t* pkt) -{ -} - -/** Number of NUMA nodes we can distribute buffers to. - * @ingroup setup */ -#define NETIO_NUM_NODE_WEIGHTS 16 - -/** - * @brief An object for specifying the characteristics of NetIO communication - * endpoint. - * - * @ingroup setup - * - * The @ref netio_input_register() function uses this structure to define - * how an application tile will communicate with an IPP. - * - * - * Future updates to NetIO may add new members to this structure, - * which can affect the success of the registration operation. Thus, - * if dynamically initializing the structure, applications are urged to - * zero it out first, for example: - * - * @code - * netio_input_config_t config; - * memset(&config, 0, sizeof (config)); - * config.flags = NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE; - * config.num_receive_packets = NETIO_MAX_RECEIVE_PKTS; - * config.queue_id = 0; - * . - * . - * . - * @endcode - * - * since that guarantees that any unused structure members, including - * members which did not exist when the application was first developed, - * will not have unexpected values. - * - * If statically initializing the structure, we strongly recommend use of - * C99-style named initializers, for example: - * - * @code - * netio_input_config_t config = { - * .flags = NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE, - * .num_receive_packets = NETIO_MAX_RECEIVE_PKTS, - * .queue_id = 0, - * }, - * @endcode - * - * instead of the old-style structure initialization: - * - * @code - * // Bad example! Currently equivalent to the above, but don't do this. - * netio_input_config_t config = { - * NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE, NETIO_MAX_RECEIVE_PKTS, 0 - * }, - * @endcode - * - * since the C99 style requires no changes to the code if elements of the - * config structure are rearranged. (It also makes the initialization much - * easier to understand.) - * - * Except for items which address a particular tile's transmit or receive - * characteristics, such as the ::NETIO_RECV flag, applications are advised - * to specify the same set of configuration data on all registrations. - * This prevents differing results if multiple tiles happen to do their - * registration operations in a different order on different invocations of - * the application. This is particularly important for things like link - * management flags, and buffer size and homing specifications. - * - * Unless the ::NETIO_FIXED_BUFFER_VA flag is specified in flags, the NetIO - * buffer pool is automatically created and mapped into the application's - * virtual address space at an address chosen by the operating system, - * using the common memory (cmem) facility in the Tilera Multicore - * Components library. The cmem facility allows multiple processes to gain - * access to shared memory which is mapped into each process at an - * identical virtual address. In order for this to work, the processes - * must have a common ancestor, which must create the common memory using - * tmc_cmem_init(). - * - * In programs using the iLib process creation API, or in programs which use - * only one process (which include programs using the pthreads library), - * tmc_cmem_init() is called automatically. All other applications - * must call it explicitly, before any child processes which might call - * netio_input_register() are created. - */ -typedef struct -{ - /** Registration characteristics. - - This value determines several characteristics of the registration; - flags for different types of behavior are ORed together to make the - final flag value. Generally applications should specify exactly - one flag from each of the following categories: - - - Whether the application will be receiving packets on this queue - (::NETIO_RECV or ::NETIO_NO_RECV). - - - Whether the application will be transmitting packets on this queue, - and if so, whether it will request egress checksum calculation - (::NETIO_XMIT, ::NETIO_XMIT_CSUM, or ::NETIO_NO_XMIT). It is - legal to call netio_get_buffer() without one of the XMIT flags, - as long as ::NETIO_RECV is specified; in this case, the retrieved - buffers must be passed to another tile for transmission. - - - Whether the application expects any vendor-specific tags in - its packets' L2 headers (::NETIO_TAG_NONE, ::NETIO_TAG_BRCM, - or ::NETIO_TAG_MRVL). This must match the configuration of the - target IPP. - - To accommodate applications written to previous versions of the NetIO - interface, none of the flags above are currently required; if omitted, - NetIO behaves more or less as if ::NETIO_RECV | ::NETIO_XMIT_CSUM | - ::NETIO_TAG_NONE were used. However, explicit specification of - the relevant flags allows NetIO to do a better job of resource - allocation, allows earlier detection of certain configuration errors, - and may enable advanced features or higher performance in the future, - so their use is strongly recommended. - - Note that specifying ::NETIO_NO_RECV along with ::NETIO_NO_XMIT - is a special case, intended primarily for use by programs which - retrieve network statistics or do link management operations. - When these flags are both specified, the resulting queue may not - be used with NetIO routines other than netio_get(), netio_set(), - and netio_input_unregister(). See @ref link for more information - on link management. - - Other flags are optional; their use is described below. - */ - int flags; - - /** Interface name. This is a string which identifies the specific - Ethernet controller hardware to be used. The format of the string - is a device type and a device index, separated by a slash; so, - the first 10 Gigabit Ethernet controller is named "xgbe/0", while - the second 10/100/1000 Megabit Ethernet controller is named "gbe/1". - */ - const char* interface; - - /** Receive packet queue size. This specifies the maximum number - of ingress packets that can be received on this queue without - being retrieved by @ref netio_get_packet(). If the IPP's distribution - algorithm calls for a packet to be sent to this queue, and this - number of packets are already pending there, the new packet - will either be discarded, or sent to another tile registered - for the same queue_id (see @ref drops). This value must - be at least ::NETIO_MIN_RECEIVE_PKTS, can always be at least - ::NETIO_MAX_RECEIVE_PKTS, and may be larger than that on certain - interfaces. - */ - int num_receive_packets; - - /** The queue ID being requested. Legal values for this range from 0 - to ::NETIO_MAX_QUEUE_ID, inclusive. ::NETIO_MAX_QUEUE_ID is always - greater than or equal to the number of tiles; this allows one queue - for each tile, plus at least one additional queue. Some applications - may wish to use the additional queue as a destination for unwanted - packets, since packets delivered to queues for which no tiles have - registered are discarded. - */ - unsigned int queue_id; - - /** Maximum number of small send buffers to be held in the local empty - buffer cache. This specifies the size of the area which holds - empty small egress buffers requested from the IPP but not yet - retrieved via @ref netio_get_buffer(). This value must be greater - than zero if the application will ever use @ref netio_get_buffer() - to allocate empty small egress buffers; it may be no larger than - ::NETIO_MAX_SEND_BUFFERS. See @ref epp for more details on empty - buffer caching. - */ - int num_send_buffers_small_total; - - /** Number of small send buffers to be preallocated at registration. - If this value is nonzero, the specified number of empty small egress - buffers will be requested from the IPP during the netio_input_register - operation; this may speed the execution of @ref netio_get_buffer(). - This may be no larger than @ref num_send_buffers_small_total. See @ref - epp for more details on empty buffer caching. - */ - int num_send_buffers_small_prealloc; - - /** Maximum number of large send buffers to be held in the local empty - buffer cache. This specifies the size of the area which holds empty - large egress buffers requested from the IPP but not yet retrieved via - @ref netio_get_buffer(). This value must be greater than zero if the - application will ever use @ref netio_get_buffer() to allocate empty - large egress buffers; it may be no larger than ::NETIO_MAX_SEND_BUFFERS. - See @ref epp for more details on empty buffer caching. - */ - int num_send_buffers_large_total; - - /** Number of large send buffers to be preallocated at registration. - If this value is nonzero, the specified number of empty large egress - buffers will be requested from the IPP during the netio_input_register - operation; this may speed the execution of @ref netio_get_buffer(). - This may be no larger than @ref num_send_buffers_large_total. See @ref - epp for more details on empty buffer caching. - */ - int num_send_buffers_large_prealloc; - - /** Maximum number of jumbo send buffers to be held in the local empty - buffer cache. This specifies the size of the area which holds empty - jumbo egress buffers requested from the IPP but not yet retrieved via - @ref netio_get_buffer(). This value must be greater than zero if the - application will ever use @ref netio_get_buffer() to allocate empty - jumbo egress buffers; it may be no larger than ::NETIO_MAX_SEND_BUFFERS. - See @ref epp for more details on empty buffer caching. - */ - int num_send_buffers_jumbo_total; - - /** Number of jumbo send buffers to be preallocated at registration. - If this value is nonzero, the specified number of empty jumbo egress - buffers will be requested from the IPP during the netio_input_register - operation; this may speed the execution of @ref netio_get_buffer(). - This may be no larger than @ref num_send_buffers_jumbo_total. See @ref - epp for more details on empty buffer caching. - */ - int num_send_buffers_jumbo_prealloc; - - /** Total packet buffer size. This determines the total size, in bytes, - of the NetIO buffer pool. Note that the maximum number of available - buffers of each size is determined during hypervisor configuration - (see the <em>System Programmer's Guide</em> for details); this just - influences how much host memory is allocated for those buffers. - - The buffer pool is allocated from common memory, which will be - automatically initialized if needed. If your buffer pool is larger - than 240 MB, you might need to explicitly call @c tmc_cmem_init(), - as described in the Application Libraries Reference Manual (UG227). - - Packet buffers are currently allocated in chunks of 16 MB; this - value will be rounded up to the next larger multiple of 16 MB. - If this value is zero, a default of 32 MB will be used; this was - the value used by previous versions of NetIO. Note that taking this - default also affects the placement of buffers on Linux NUMA nodes. - See @ref buffer_node_weights for an explanation of buffer placement. - - In order to successfully allocate packet buffers, Linux must have - available huge pages on the relevant Linux NUMA nodes. See the - <em>System Programmer's Guide</em> for information on configuring - huge page support in Linux. - */ - uint64_t total_buffer_size; - - /** Buffer placement weighting factors. - - This array specifies the relative amount of buffering to place - on each of the available Linux NUMA nodes. This array is - indexed by the NUMA node, and the values in the array are - proportional to the amount of buffer space to allocate on that - node. - - If memory striping is enabled in the Hypervisor, then there is - only one logical NUMA node (node 0). In that case, NetIO will by - default ignore the suggested buffer node weights, and buffers - will be striped across the physical memory controllers. See - UG209 System Programmer's Guide for a description of the - hypervisor option that controls memory striping. - - If memory striping is disabled, then there are up to four NUMA - nodes, corresponding to the four DDRAM controllers in the TILE - processor architecture. See UG100 Tile Processor Architecture - Overview for a diagram showing the location of each of the DDRAM - controllers relative to the tile array. - - For instance, if memory striping is disabled, the following - configuration strucure: - - @code - netio_input_config_t config = { - . - . - . - .total_buffer_size = 4 * 16 * 1024 * 1024; - .buffer_node_weights = { 1, 0, 1, 0 }, - }, - @endcode - - would result in 32 MB of buffers being placed on controller 0, and - 32 MB on controller 2. (Since buffers are allocated in units of - 16 MB, some sets of weights will not be able to be matched exactly.) - - For the weights to be effective, @ref total_buffer_size must be - nonzero. If @ref total_buffer_size is zero, causing the default - 32 MB of buffer space to be used, then any specified weights will - be ignored, and buffers will positioned as they were in previous - versions of NetIO: - - - For xgbe/0 and gbe/0, 16 MB of buffers will be placed on controller 1, - and the other 16 MB will be placed on controller 2. - - - For xgbe/1 and gbe/1, 16 MB of buffers will be placed on controller 2, - and the other 16 MB will be placed on controller 3. - - If @ref total_buffer_size is nonzero, but all weights are zero, - then all buffer space will be allocated on Linux NUMA node zero. - - By default, the specified buffer placement is treated as a hint; - if sufficient free memory is not available on the specified - controllers, the buffers will be allocated elsewhere. However, - if the ::NETIO_STRICT_HOMING flag is specified in @ref flags, then a - failure to allocate buffer space exactly as requested will cause the - registration operation to fail with an error of ::NETIO_CANNOT_HOME. - - Note that maximal network performance cannot be achieved with - only one memory controller. - */ - uint8_t buffer_node_weights[NETIO_NUM_NODE_WEIGHTS]; - - /** Fixed virtual address for packet buffers. Only valid when - ::NETIO_FIXED_BUFFER_VA is specified in @ref flags; see the - description of that flag for details. - */ - void* fixed_buffer_va; - - /** - Maximum number of outstanding send packet requests. This value is - only relevant when an EPP is in use; it determines the number of - slots in the EPP's outgoing packet queue which this tile is allowed - to consume, and thus the number of packets which may be sent before - the sending tile must wait for an acknowledgment from the EPP. - Modifying this value is generally only helpful when using @ref - netio_send_packet_vector(), where it can help improve performance by - allowing a single vector send operation to process more packets. - Typically it is not specified, and the default, which divides the - outgoing packet slots evenly between all tiles on the chip, is used. - - If a registration asks for more outgoing packet queue slots than are - available, ::NETIO_TOOMANY_XMIT will be returned. The total number - of packet queue slots which are available for all tiles for each EPP - is subject to change, but is currently ::NETIO_TOTAL_SENDS_OUTSTANDING. - - - This value is ignored if ::NETIO_XMIT is not specified in flags. - If you want to specify a large value here for a specific tile, you are - advised to specify NETIO_NO_XMIT on other, non-transmitting tiles so - that they do not consume a default number of packet slots. Any tile - transmitting is required to have at least ::NETIO_MIN_SENDS_OUTSTANDING - slots allocated to it; values less than that will be silently - increased by the NetIO library. - */ - int num_sends_outstanding; -} -netio_input_config_t; - - -/** Registration flags; used in the @ref netio_input_config_t structure. - * @addtogroup setup - */ -/** @{ */ - -/** Fail a registration request if we can't put packet buffers - on the specified memory controllers. */ -#define NETIO_STRICT_HOMING 0x00000002 - -/** This application expects no tags on its L2 headers. */ -#define NETIO_TAG_NONE 0x00000004 - -/** This application expects Marvell extended tags on its L2 headers. */ -#define NETIO_TAG_MRVL 0x00000008 - -/** This application expects Broadcom tags on its L2 headers. */ -#define NETIO_TAG_BRCM 0x00000010 - -/** This registration may call routines which receive packets. */ -#define NETIO_RECV 0x00000020 - -/** This registration may not call routines which receive packets. */ -#define NETIO_NO_RECV 0x00000040 - -/** This registration may call routines which transmit packets. */ -#define NETIO_XMIT 0x00000080 - -/** This registration may call routines which transmit packets with - checksum acceleration. */ -#define NETIO_XMIT_CSUM 0x00000100 - -/** This registration may not call routines which transmit packets. */ -#define NETIO_NO_XMIT 0x00000200 - -/** This registration wants NetIO buffers mapped at an application-specified - virtual address. - - NetIO buffers are by default created by the TMC common memory facility, - which must be configured by a common ancestor of all processes sharing - a network interface. When this flag is specified, NetIO buffers are - instead mapped at an address chosen by the application (and specified - in @ref netio_input_config_t::fixed_buffer_va). This allows multiple - unrelated but cooperating processes to share a NetIO interface. - All processes sharing the same interface must specify this flag, - and all must specify the same fixed virtual address. - - @ref netio_input_config_t::fixed_buffer_va must be a - multiple of 16 MB, and the packet buffers will occupy @ref - netio_input_config_t::total_buffer_size bytes of virtual address - space, beginning at that address. If any of those virtual addresses - are currently occupied by other memory objects, like application or - shared library code or data, @ref netio_input_register() will return - ::NETIO_FAULT. While it is impossible to provide a fixed_buffer_va - which will work for all applications, a good first guess might be to - use 0xb0000000 minus @ref netio_input_config_t::total_buffer_size. - If that fails, it might be helpful to consult the running application's - virtual address description file (/proc/<em>pid</em>/maps) to see - which regions of virtual address space are available. - */ -#define NETIO_FIXED_BUFFER_VA 0x00000400 - -/** This registration call will not complete unless the network link - is up. The process will wait several seconds for this to happen (the - precise interval is link-dependent), but if the link does not come up, - ::NETIO_LINK_DOWN will be returned. This flag is the default if - ::NETIO_NOREQUIRE_LINK_UP is not specified. Note that this flag by - itself does not request that the link be brought up; that can be done - with the ::NETIO_AUTO_LINK_UPDN or ::NETIO_AUTO_LINK_UP flags (the - latter is the default if no NETIO_AUTO_LINK_xxx flags are specified), - or by explicitly setting the link's desired state via netio_set(). - If the link is not brought up by one of those methods, and this flag - is specified, the registration operation will return ::NETIO_LINK_DOWN. - This flag is ignored if it is specified along with ::NETIO_NO_XMIT and - ::NETIO_NO_RECV. See @ref link for more information on link - management. - */ -#define NETIO_REQUIRE_LINK_UP 0x00000800 - -/** This registration call will complete even if the network link is not up. - Whenever the link is not up, packets will not be sent or received: - netio_get_packet() will return ::NETIO_NOPKT once all queued packets - have been drained, and netio_send_packet() and similar routines will - return NETIO_QUEUE_FULL once the outgoing packet queue in the EPP - or the I/O shim is full. See @ref link for more information on link - management. - */ -#define NETIO_NOREQUIRE_LINK_UP 0x00001000 - -#ifndef __DOXYGEN__ -/* - * These are part of the implementation of the NETIO_AUTO_LINK_xxx flags, - * but should not be used directly by applications, and are thus not - * documented. - */ -#define _NETIO_AUTO_UP 0x00002000 -#define _NETIO_AUTO_DN 0x00004000 -#define _NETIO_AUTO_PRESENT 0x00008000 -#endif - -/** Set the desired state of the link to up, allowing any speeds which are - supported by the link hardware, as part of this registration operation. - Do not take down the link automatically. This is the default if - no other NETIO_AUTO_LINK_xxx flags are specified. This flag is ignored - if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV. - See @ref link for more information on link management. - */ -#define NETIO_AUTO_LINK_UP (_NETIO_AUTO_PRESENT | _NETIO_AUTO_UP) - -/** Set the desired state of the link to up, allowing any speeds which are - supported by the link hardware, as part of this registration operation. - Set the desired state of the link to down the next time no tiles are - registered for packet reception or transmission. This flag is ignored - if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV. - See @ref link for more information on link management. - */ -#define NETIO_AUTO_LINK_UPDN (_NETIO_AUTO_PRESENT | _NETIO_AUTO_UP | \ - _NETIO_AUTO_DN) - -/** Set the desired state of the link to down the next time no tiles are - registered for packet reception or transmission. This flag is ignored - if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV. - See @ref link for more information on link management. - */ -#define NETIO_AUTO_LINK_DN (_NETIO_AUTO_PRESENT | _NETIO_AUTO_DN) - -/** Do not bring up the link automatically as part of this registration - operation. Do not take down the link automatically. This flag - is ignored if it is specified along with ::NETIO_NO_XMIT and - ::NETIO_NO_RECV. See @ref link for more information on link management. - */ -#define NETIO_AUTO_LINK_NONE _NETIO_AUTO_PRESENT - - -/** Minimum number of receive packets. */ -#define NETIO_MIN_RECEIVE_PKTS 16 - -/** Lower bound on the maximum number of receive packets; may be higher - than this on some interfaces. */ -#define NETIO_MAX_RECEIVE_PKTS 128 - -/** Maximum number of send buffers, per packet size. */ -#define NETIO_MAX_SEND_BUFFERS 16 - -/** Number of EPP queue slots, and thus outstanding sends, per EPP. */ -#define NETIO_TOTAL_SENDS_OUTSTANDING 2015 - -/** Minimum number of EPP queue slots, and thus outstanding sends, per - * transmitting tile. */ -#define NETIO_MIN_SENDS_OUTSTANDING 16 - - -/**@}*/ - -#ifndef __DOXYGEN__ - -/** - * An object for providing Ethernet packets to a process. - */ -struct __netio_queue_impl_t; - -/** - * An object for managing the user end of a NetIO queue. - */ -struct __netio_queue_user_impl_t; - -#endif /* !__DOXYGEN__ */ - - -/** A netio_queue_t describes a NetIO communications endpoint. - * @ingroup setup - */ -typedef struct -{ -#ifdef __DOXYGEN__ - uint8_t opaque[8]; /**< This is an opaque structure. */ -#else - struct __netio_queue_impl_t* __system_part; /**< The system part. */ - struct __netio_queue_user_impl_t* __user_part; /**< The user part. */ -#ifdef _NETIO_PTHREAD - _netio_percpu_mutex_t lock; /**< Queue lock. */ -#endif -#endif -} -netio_queue_t; - - -/** - * @brief Packet send context. - * - * @ingroup egress - * - * Packet send context for use with netio_send_packet_prepare and _commit. - */ -typedef struct -{ -#ifdef __DOXYGEN__ - uint8_t opaque[44]; /**< This is an opaque structure. */ -#else - uint8_t flags; /**< Defined below */ - uint8_t datalen; /**< Number of valid words pointed to by data. */ - uint32_t request[9]; /**< Request to be sent to the EPP or shim. Note - that this is smaller than the 11-word maximum - request size, since some constant values are - not saved in the context. */ - uint32_t *data; /**< Data to be sent to the EPP or shim via IDN. */ -#endif -} -netio_send_pkt_context_t; - - -#ifndef __DOXYGEN__ -#define SEND_PKT_CTX_USE_EPP 1 /**< We're sending to an EPP. */ -#define SEND_PKT_CTX_SEND_CSUM 2 /**< Request includes a checksum. */ -#endif - -/** - * @brief Packet vector entry. - * - * @ingroup egress - * - * This data structure is used with netio_send_packet_vector() to send multiple - * packets with one NetIO call. The structure should be initialized by - * calling netio_pkt_vector_set(), rather than by setting the fields - * directly. - * - * This structure is guaranteed to be a power of two in size, no - * bigger than one L2 cache line, and to be aligned modulo its size. - */ -typedef struct -#ifndef __DOXYGEN__ -__attribute__((aligned(8))) -#endif -{ - /** Reserved for use by the user application. When initialized with - * the netio_set_pkt_vector_entry() function, this field is guaranteed - * to be visible to readers only after all other fields are already - * visible. This way it can be used as a valid flag or generation - * counter. */ - uint8_t user_data; - - /* Structure members below this point should not be accessed directly by - * applications, as they may change in the future. */ - - /** Low 8 bits of the packet address to send. The high bits are - * acquired from the 'handle' field. */ - uint8_t buffer_address_low; - - /** Number of bytes to transmit. */ - uint16_t size; - - /** The raw handle from a netio_pkt_t. If this is NETIO_PKT_HANDLE_NONE, - * this vector entry will be skipped and no packet will be transmitted. */ - netio_pkt_handle_t handle; -} -netio_pkt_vector_entry_t; - - -/** - * @brief Initialize fields in a packet vector entry. - * - * @ingroup egress - * - * @param[out] v Pointer to the vector entry to be initialized. - * @param[in] pkt Packet to be transmitted when the vector entry is passed to - * netio_send_packet_vector(). Note that the packet's attributes - * (e.g., its L2 offset and length) are captured at the time this - * routine is called; subsequent changes in those attributes will not - * be reflected in the packet which is actually transmitted. - * Changes in the packet's contents, however, will be so reflected. - * If this is NULL, no packet will be transmitted. - * @param[in] user_data User data to be set in the vector entry. - * This function guarantees that the "user_data" field will become - * visible to a reader only after all other fields have become visible. - * This allows a structure in a ring buffer to be written and read - * by a polling reader without any locks or other synchronization. - */ -static __inline void -netio_pkt_vector_set(volatile netio_pkt_vector_entry_t* v, netio_pkt_t* pkt, - uint8_t user_data) -{ - if (pkt) - { - if (NETIO_PKT_IS_MINIMAL(pkt)) - { - netio_pkt_minimal_metadata_t* mmd = - (netio_pkt_minimal_metadata_t*) &pkt->__metadata; - v->buffer_address_low = (uintptr_t) NETIO_PKT_L2_DATA_MM(mmd, pkt) & 0xFF; - v->size = NETIO_PKT_L2_LENGTH_MM(mmd, pkt); - } - else - { - netio_pkt_metadata_t* mda = &pkt->__metadata; - v->buffer_address_low = (uintptr_t) NETIO_PKT_L2_DATA_M(mda, pkt) & 0xFF; - v->size = NETIO_PKT_L2_LENGTH_M(mda, pkt); - } - v->handle.word = pkt->__packet.word; - } - else - { - v->handle.word = 0; /* Set handle to NETIO_PKT_HANDLE_NONE. */ - } - - __asm__("" : : : "memory"); - - v->user_data = user_data; -} - - -/** - * Flags and structures for @ref netio_get() and @ref netio_set(). - * @ingroup config - */ - -/** @{ */ -/** Parameter class; addr is a NETIO_PARAM_xxx value. */ -#define NETIO_PARAM 0 -/** Interface MAC address. This address is only valid with @ref netio_get(). - * The value is a 6-byte MAC address. Depending upon the overall system - * design, a MAC address may or may not be available for each interface. */ -#define NETIO_PARAM_MAC 0 - -/** Determine whether to suspend output on the receipt of pause frames. - * If the value is nonzero, the I/O shim will suspend output when a pause - * frame is received. If the value is zero, pause frames will be ignored. */ -#define NETIO_PARAM_PAUSE_IN 1 - -/** Determine whether to send pause frames if the I/O shim packet FIFOs are - * nearly full. If the value is zero, pause frames are not sent. If - * the value is nonzero, it is the delay value which will be sent in any - * pause frames which are output, in units of 512 bit times. */ -#define NETIO_PARAM_PAUSE_OUT 2 - -/** Jumbo frame support. The value is a 4-byte integer. If the value is - * nonzero, the MAC will accept frames of up to 10240 bytes. If the value - * is zero, the MAC will only accept frames of up to 1544 bytes. */ -#define NETIO_PARAM_JUMBO 3 - -/** I/O shim's overflow statistics register. The value is two 16-bit integers. - * The first 16-bit value (or the low 16 bits, if the value is treated as a - * 32-bit number) is the count of packets which were completely dropped and - * not delivered by the shim. The second 16-bit value (or the high 16 bits, - * if the value is treated as a 32-bit number) is the count of packets - * which were truncated and thus only partially delivered by the shim. This - * register is automatically reset to zero after it has been read. - */ -#define NETIO_PARAM_OVERFLOW 4 - -/** IPP statistics. This address is only valid with @ref netio_get(). The - * value is a netio_stat_t structure. Unlike the I/O shim statistics, the - * IPP statistics are not all reset to zero on read; see the description - * of the netio_stat_t for details. */ -#define NETIO_PARAM_STAT 5 - -/** Possible link state. The value is a combination of "NETIO_LINK_xxx" - * flags. With @ref netio_get(), this will indicate which flags are - * actually supported by the hardware. - * - * For historical reasons, specifying this value to netio_set() will have - * the same behavior as using ::NETIO_PARAM_LINK_CONFIG, but this usage is - * discouraged. - */ -#define NETIO_PARAM_LINK_POSSIBLE_STATE 6 - -/** Link configuration. The value is a combination of "NETIO_LINK_xxx" flags. - * With @ref netio_set(), this will attempt to immediately bring up the - * link using whichever of the requested flags are supported by the - * hardware, or take down the link if the flags are zero; if this is - * not possible, an error will be returned. Many programs will want - * to use ::NETIO_PARAM_LINK_DESIRED_STATE instead. - * - * For historical reasons, specifying this value to netio_get() will - * have the same behavior as using ::NETIO_PARAM_LINK_POSSIBLE_STATE, - * but this usage is discouraged. - */ -#define NETIO_PARAM_LINK_CONFIG NETIO_PARAM_LINK_POSSIBLE_STATE - -/** Current link state. This address is only valid with @ref netio_get(). - * The value is zero or more of the "NETIO_LINK_xxx" flags, ORed together. - * If the link is down, the value ANDed with NETIO_LINK_SPEED will be - * zero; if the link is up, the value ANDed with NETIO_LINK_SPEED will - * result in exactly one of the NETIO_LINK_xxx values, indicating the - * current speed. */ -#define NETIO_PARAM_LINK_CURRENT_STATE 7 - -/** Variant symbol for current state, retained for compatibility with - * pre-MDE-2.1 programs. */ -#define NETIO_PARAM_LINK_STATUS NETIO_PARAM_LINK_CURRENT_STATE - -/** Packet Coherence protocol. This address is only valid with @ref netio_get(). - * The value is nonzero if the interface is configured for cache-coherent DMA. - */ -#define NETIO_PARAM_COHERENT 8 - -/** Desired link state. The value is a conbination of "NETIO_LINK_xxx" - * flags, which specify the desired state for the link. With @ref - * netio_set(), this will, in the background, attempt to bring up the link - * using whichever of the requested flags are reasonable, or take down the - * link if the flags are zero. The actual link up or down operation may - * happen after this call completes. If the link state changes in the - * future, the system will continue to try to get back to the desired link - * state; for instance, if the link is brought up successfully, and then - * the network cable is disconnected, the link will go down. However, the - * desired state of the link is still up, so if the cable is reconnected, - * the link will be brought up again. - * - * With @ref netio_get(), this will indicate the desired state for the - * link, as set with a previous netio_set() call, or implicitly by a - * netio_input_register() or netio_input_unregister() operation. This may - * not reflect the current state of the link; to get that, use - * ::NETIO_PARAM_LINK_CURRENT_STATE. */ -#define NETIO_PARAM_LINK_DESIRED_STATE 9 - -/** NetIO statistics structure. Retrieved using the ::NETIO_PARAM_STAT - * address passed to @ref netio_get(). */ -typedef struct -{ - /** Number of packets which have been received by the IPP and forwarded - * to a tile's receive queue for processing. This value wraps at its - * maximum, and is not cleared upon read. */ - uint32_t packets_received; - - /** Number of packets which have been dropped by the IPP, because they could - * not be received, or could not be forwarded to a tile. The former happens - * when the IPP does not have a free packet buffer of suitable size for an - * incoming frame. The latter happens when all potential destination tiles - * for a packet, as defined by the group, bucket, and queue configuration, - * have full receive queues. This value wraps at its maximum, and is not - * cleared upon read. */ - uint32_t packets_dropped; - - /* - * Note: the #defines after each of the following four one-byte values - * denote their location within the third word of the netio_stat_t. They - * are intended for use only by the IPP implementation and are thus omitted - * from the Doxygen output. - */ - - /** Number of packets dropped because no worker was able to accept a new - * packet. This value saturates at its maximum, and is cleared upon - * read. */ - uint8_t drops_no_worker; -#ifndef __DOXYGEN__ -#define NETIO_STAT_DROPS_NO_WORKER 0 -#endif - - /** Number of packets dropped because no small buffers were available. - * This value saturates at its maximum, and is cleared upon read. */ - uint8_t drops_no_smallbuf; -#ifndef __DOXYGEN__ -#define NETIO_STAT_DROPS_NO_SMALLBUF 1 -#endif - - /** Number of packets dropped because no large buffers were available. - * This value saturates at its maximum, and is cleared upon read. */ - uint8_t drops_no_largebuf; -#ifndef __DOXYGEN__ -#define NETIO_STAT_DROPS_NO_LARGEBUF 2 -#endif - - /** Number of packets dropped because no jumbo buffers were available. - * This value saturates at its maximum, and is cleared upon read. */ - uint8_t drops_no_jumbobuf; -#ifndef __DOXYGEN__ -#define NETIO_STAT_DROPS_NO_JUMBOBUF 3 -#endif -} -netio_stat_t; - - -/** Link can run, should run, or is running at 10 Mbps. */ -#define NETIO_LINK_10M 0x01 - -/** Link can run, should run, or is running at 100 Mbps. */ -#define NETIO_LINK_100M 0x02 - -/** Link can run, should run, or is running at 1 Gbps. */ -#define NETIO_LINK_1G 0x04 - -/** Link can run, should run, or is running at 10 Gbps. */ -#define NETIO_LINK_10G 0x08 - -/** Link should run at the highest speed supported by the link and by - * the device connected to the link. Only usable as a value for - * the link's desired state; never returned as a value for the current - * or possible states. */ -#define NETIO_LINK_ANYSPEED 0x10 - -/** All legal link speeds. */ -#define NETIO_LINK_SPEED (NETIO_LINK_10M | \ - NETIO_LINK_100M | \ - NETIO_LINK_1G | \ - NETIO_LINK_10G | \ - NETIO_LINK_ANYSPEED) - - -/** MAC register class. Addr is a register offset within the MAC. - * Registers within the XGbE and GbE MACs are documented in the Tile - * Processor I/O Device Guide (UG104). MAC registers start at address - * 0x4000, and do not include the MAC_INTERFACE registers. */ -#define NETIO_MAC 1 - -/** MDIO register class (IEEE 802.3 clause 22 format). Addr is the "addr" - * member of a netio_mdio_addr_t structure. */ -#define NETIO_MDIO 2 - -/** MDIO register class (IEEE 802.3 clause 45 format). Addr is the "addr" - * member of a netio_mdio_addr_t structure. */ -#define NETIO_MDIO_CLAUSE45 3 - -/** NetIO MDIO address type. Retrieved or provided using the ::NETIO_MDIO - * address passed to @ref netio_get() or @ref netio_set(). */ -typedef union -{ - struct - { - unsigned int reg:16; /**< MDIO register offset. For clause 22 access, - must be less than 32. */ - unsigned int phy:5; /**< Which MDIO PHY to access. */ - unsigned int dev:5; /**< Which MDIO device to access within that PHY. - Applicable for clause 45 access only; ignored - for clause 22 access. */ - } - bits; /**< Container for bitfields. */ - uint64_t addr; /**< Value to pass to @ref netio_get() or - * @ref netio_set(). */ -} -netio_mdio_addr_t; - -/** @} */ - -#endif /* __NETIO_INTF_H__ */ diff --git a/arch/tile/include/hv/syscall_public.h b/arch/tile/include/hv/syscall_public.h deleted file mode 100644 index 9cc0837e69fd..000000000000 --- a/arch/tile/include/hv/syscall_public.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/** - * @file syscall.h - * Indices for the hypervisor system calls that are intended to be called - * directly, rather than only through hypervisor-generated "glue" code. - */ - -#ifndef _SYS_HV_INCLUDE_SYSCALL_PUBLIC_H -#define _SYS_HV_INCLUDE_SYSCALL_PUBLIC_H - -/** Fast syscall flag bit location. When this bit is set, the hypervisor - * handles the syscall specially. - */ -#define HV_SYS_FAST_SHIFT 14 - -/** Fast syscall flag bit mask. */ -#define HV_SYS_FAST_MASK (1 << HV_SYS_FAST_SHIFT) - -/** Bit location for flagging fast syscalls that can be called from PL0. */ -#define HV_SYS_FAST_PLO_SHIFT 13 - -/** Fast syscall allowing PL0 bit mask. */ -#define HV_SYS_FAST_PL0_MASK (1 << HV_SYS_FAST_PLO_SHIFT) - -/** Perform an MF that waits for all victims to reach DRAM. */ -#define HV_SYS_fence_incoherent (51 | HV_SYS_FAST_MASK \ - | HV_SYS_FAST_PL0_MASK) - -#endif /* !_SYS_HV_INCLUDE_SYSCALL_PUBLIC_H */ diff --git a/arch/tile/include/uapi/arch/abi.h b/arch/tile/include/uapi/arch/abi.h deleted file mode 100644 index df161a484730..000000000000 --- a/arch/tile/include/uapi/arch/abi.h +++ /dev/null @@ -1,101 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/** - * @file - * - * ABI-related register definitions. - */ - -#ifndef __ARCH_ABI_H__ - -#ifndef __tile__ /* support uncommon use of arch headers in non-tile builds */ -# include <arch/chip.h> -# define __INT_REG_BITS CHIP_WORD_SIZE() -#endif - -#include <arch/intreg.h> - -/* __need_int_reg_t is deprecated: just include <arch/intreg.h> */ -#ifndef __need_int_reg_t - -#define __ARCH_ABI_H__ - -#ifndef __ASSEMBLER__ -/** Unsigned type that can hold a register. */ -typedef __uint_reg_t uint_reg_t; - -/** Signed type that can hold a register. */ -typedef __int_reg_t int_reg_t; -#endif - -/** String prefix to use for printf(). */ -#define INT_REG_FMT __INT_REG_FMT - -/** Number of bits in a register. */ -#define INT_REG_BITS __INT_REG_BITS - - -/* Registers 0 - 55 are "normal", but some perform special roles. */ - -#define TREG_FP 52 /**< Frame pointer. */ -#define TREG_TP 53 /**< Thread pointer. */ -#define TREG_SP 54 /**< Stack pointer. */ -#define TREG_LR 55 /**< Link to calling function PC. */ - -/** Index of last normal general-purpose register. */ -#define TREG_LAST_GPR 55 - -/* Registers 56 - 62 are "special" network registers. */ - -#define TREG_SN 56 /**< Static network access. */ -#define TREG_IDN0 57 /**< IDN demux 0 access. */ -#define TREG_IDN1 58 /**< IDN demux 1 access. */ -#define TREG_UDN0 59 /**< UDN demux 0 access. */ -#define TREG_UDN1 60 /**< UDN demux 1 access. */ -#define TREG_UDN2 61 /**< UDN demux 2 access. */ -#define TREG_UDN3 62 /**< UDN demux 3 access. */ - -/* Register 63 is the "special" zero register. */ - -#define TREG_ZERO 63 /**< "Zero" register; always reads as "0". */ - - -/** By convention, this register is used to hold the syscall number. */ -#define TREG_SYSCALL_NR 10 - -/** Name of register that holds the syscall number, for use in assembly. */ -#define TREG_SYSCALL_NR_NAME r10 - - -/** - * The ABI requires callers to allocate a caller state save area of - * this many bytes at the bottom of each stack frame. - */ -#define C_ABI_SAVE_AREA_SIZE (2 * (INT_REG_BITS / 8)) - -/** - * The operand to an 'info' opcode directing the backtracer to not - * try to find the calling frame. - */ -#define INFO_OP_CANNOT_BACKTRACE 2 - - -#endif /* !__need_int_reg_t */ - -/* Make sure we later can get all the definitions and declarations. */ -#undef __need_int_reg_t - -#endif /* !__ARCH_ABI_H__ */ diff --git a/arch/tile/include/uapi/arch/chip.h b/arch/tile/include/uapi/arch/chip.h deleted file mode 100644 index 7f55c6856c89..000000000000 --- a/arch/tile/include/uapi/arch/chip.h +++ /dev/null @@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#if __tile_chip__ == 1 -#include <arch/chip_tilepro.h> -#elif defined(__tilegx__) -#include <arch/chip_tilegx.h> -#else -#error Unexpected Tilera chip type -#endif diff --git a/arch/tile/include/uapi/arch/chip_tilegx.h b/arch/tile/include/uapi/arch/chip_tilegx.h deleted file mode 100644 index c2a71a43b21c..000000000000 --- a/arch/tile/include/uapi/arch/chip_tilegx.h +++ /dev/null @@ -1,259 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* - * @file - * Global header file. - * This header file specifies defines for TILE-Gx. - */ - -#ifndef __ARCH_CHIP_H__ -#define __ARCH_CHIP_H__ - -/** Specify chip version. - * When possible, prefer the CHIP_xxx symbols below for future-proofing. - * This is intended for cross-compiling; native compilation should - * use the predefined __tile_chip__ symbol. - */ -#define TILE_CHIP 10 - -/** Specify chip revision. - * This provides for the case of a respin of a particular chip type; - * the normal value for this symbol is "0". - * This is intended for cross-compiling; native compilation should - * use the predefined __tile_chip_rev__ symbol. - */ -#define TILE_CHIP_REV 0 - -/** The name of this architecture. */ -#define CHIP_ARCH_NAME "tilegx" - -/** The ELF e_machine type for binaries for this chip. */ -#define CHIP_ELF_TYPE() EM_TILEGX - -/** The alternate ELF e_machine type for binaries for this chip. */ -#define CHIP_COMPAT_ELF_TYPE() 0x2597 - -/** What is the native word size of the machine? */ -#define CHIP_WORD_SIZE() 64 - -/** How many bits of a virtual address are used. Extra bits must be - * the sign extension of the low bits. - */ -#define CHIP_VA_WIDTH() 42 - -/** How many bits are in a physical address? */ -#define CHIP_PA_WIDTH() 40 - -/** Size of the L2 cache, in bytes. */ -#define CHIP_L2_CACHE_SIZE() 262144 - -/** Log size of an L2 cache line in bytes. */ -#define CHIP_L2_LOG_LINE_SIZE() 6 - -/** Size of an L2 cache line, in bytes. */ -#define CHIP_L2_LINE_SIZE() (1 << CHIP_L2_LOG_LINE_SIZE()) - -/** Associativity of the L2 cache. */ -#define CHIP_L2_ASSOC() 8 - -/** Size of the L1 data cache, in bytes. */ -#define CHIP_L1D_CACHE_SIZE() 32768 - -/** Log size of an L1 data cache line in bytes. */ -#define CHIP_L1D_LOG_LINE_SIZE() 6 - -/** Size of an L1 data cache line, in bytes. */ -#define CHIP_L1D_LINE_SIZE() (1 << CHIP_L1D_LOG_LINE_SIZE()) - -/** Associativity of the L1 data cache. */ -#define CHIP_L1D_ASSOC() 2 - -/** Size of the L1 instruction cache, in bytes. */ -#define CHIP_L1I_CACHE_SIZE() 32768 - -/** Log size of an L1 instruction cache line in bytes. */ -#define CHIP_L1I_LOG_LINE_SIZE() 6 - -/** Size of an L1 instruction cache line, in bytes. */ -#define CHIP_L1I_LINE_SIZE() (1 << CHIP_L1I_LOG_LINE_SIZE()) - -/** Associativity of the L1 instruction cache. */ -#define CHIP_L1I_ASSOC() 2 - -/** Stride with which flush instructions must be issued. */ -#define CHIP_FLUSH_STRIDE() CHIP_L2_LINE_SIZE() - -/** Stride with which inv instructions must be issued. */ -#define CHIP_INV_STRIDE() CHIP_L2_LINE_SIZE() - -/** Stride with which finv instructions must be issued. */ -#define CHIP_FINV_STRIDE() CHIP_L2_LINE_SIZE() - -/** Can the local cache coherently cache data that is homed elsewhere? */ -#define CHIP_HAS_COHERENT_LOCAL_CACHE() 1 - -/** How many simultaneous outstanding victims can the L2 cache have? */ -#define CHIP_MAX_OUTSTANDING_VICTIMS() 128 - -/** Does the TLB support the NC and NOALLOC bits? */ -#define CHIP_HAS_NC_AND_NOALLOC_BITS() 1 - -/** Does the chip support hash-for-home caching? */ -#define CHIP_HAS_CBOX_HOME_MAP() 1 - -/** Number of entries in the chip's home map tables. */ -#define CHIP_CBOX_HOME_MAP_SIZE() 128 - -/** Do uncacheable requests miss in the cache regardless of whether - * there is matching data? */ -#define CHIP_HAS_ENFORCED_UNCACHEABLE_REQUESTS() 1 - -/** Does the mf instruction wait for victims? */ -#define CHIP_HAS_MF_WAITS_FOR_VICTIMS() 0 - -/** Does the chip have an "inv" instruction that doesn't also flush? */ -#define CHIP_HAS_INV() 1 - -/** Does the chip have a "wh64" instruction? */ -#define CHIP_HAS_WH64() 1 - -/** Does this chip have a 'dword_align' instruction? */ -#define CHIP_HAS_DWORD_ALIGN() 0 - -/** Number of performance counters. */ -#define CHIP_PERFORMANCE_COUNTERS() 4 - -/** Does this chip have auxiliary performance counters? */ -#define CHIP_HAS_AUX_PERF_COUNTERS() 1 - -/** Is the CBOX_MSR1 SPR supported? */ -#define CHIP_HAS_CBOX_MSR1() 0 - -/** Is the TILE_RTF_HWM SPR supported? */ -#define CHIP_HAS_TILE_RTF_HWM() 1 - -/** Is the TILE_WRITE_PENDING SPR supported? */ -#define CHIP_HAS_TILE_WRITE_PENDING() 0 - -/** Is the PROC_STATUS SPR supported? */ -#define CHIP_HAS_PROC_STATUS_SPR() 1 - -/** Is the DSTREAM_PF SPR supported? */ -#define CHIP_HAS_DSTREAM_PF() 1 - -/** Log of the number of mshims we have. */ -#define CHIP_LOG_NUM_MSHIMS() 2 - -/** Are the bases of the interrupt vector areas fixed? */ -#define CHIP_HAS_FIXED_INTVEC_BASE() 0 - -/** Are the interrupt masks split up into 2 SPRs? */ -#define CHIP_HAS_SPLIT_INTR_MASK() 0 - -/** Is the cycle count split up into 2 SPRs? */ -#define CHIP_HAS_SPLIT_CYCLE() 0 - -/** Does the chip have a static network? */ -#define CHIP_HAS_SN() 0 - -/** Does the chip have a static network processor? */ -#define CHIP_HAS_SN_PROC() 0 - -/** Size of the L1 static network processor instruction cache, in bytes. */ -/* #define CHIP_L1SNI_CACHE_SIZE() -- does not apply to chip 10 */ - -/** Does the chip have DMA support in each tile? */ -#define CHIP_HAS_TILE_DMA() 0 - -/** Does the chip have the second revision of the directly accessible - * dynamic networks? This encapsulates a number of characteristics, - * including the absence of the catch-all, the absence of inline message - * tags, the absence of support for network context-switching, and so on. - */ -#define CHIP_HAS_REV1_XDN() 1 - -/** Does the chip have cmpexch and similar (fetchadd, exch, etc.)? */ -#define CHIP_HAS_CMPEXCH() 1 - -/** Does the chip have memory-mapped I/O support? */ -#define CHIP_HAS_MMIO() 1 - -/** Does the chip have post-completion interrupts? */ -#define CHIP_HAS_POST_COMPLETION_INTERRUPTS() 1 - -/** Does the chip have native single step support? */ -#define CHIP_HAS_SINGLE_STEP() 1 - -#ifndef __OPEN_SOURCE__ /* features only relevant to hypervisor-level code */ - -/** How many entries are present in the instruction TLB? */ -#define CHIP_ITLB_ENTRIES() 16 - -/** How many entries are present in the data TLB? */ -#define CHIP_DTLB_ENTRIES() 32 - -/** How many MAF entries does the XAUI shim have? */ -#define CHIP_XAUI_MAF_ENTRIES() 32 - -/** Does the memory shim have a source-id table? */ -#define CHIP_HAS_MSHIM_SRCID_TABLE() 0 - -/** Does the L1 instruction cache clear on reset? */ -#define CHIP_HAS_L1I_CLEAR_ON_RESET() 1 - -/** Does the chip come out of reset with valid coordinates on all tiles? - * Note that if defined, this also implies that the upper left is 1,1. - */ -#define CHIP_HAS_VALID_TILE_COORD_RESET() 1 - -/** Does the chip have unified packet formats? */ -#define CHIP_HAS_UNIFIED_PACKET_FORMATS() 1 - -/** Does the chip support write reordering? */ -#define CHIP_HAS_WRITE_REORDERING() 1 - -/** Does the chip support Y-X routing as well as X-Y? */ -#define CHIP_HAS_Y_X_ROUTING() 1 - -/** Is INTCTRL_3 managed with the correct MPL? */ -#define CHIP_HAS_INTCTRL_3_STATUS_FIX() 1 - -/** Is it possible to configure the chip to be big-endian? */ -#define CHIP_HAS_BIG_ENDIAN_CONFIG() 1 - -/** Is the CACHE_RED_WAY_OVERRIDDEN SPR supported? */ -#define CHIP_HAS_CACHE_RED_WAY_OVERRIDDEN() 0 - -/** Is the DIAG_TRACE_WAY SPR supported? */ -#define CHIP_HAS_DIAG_TRACE_WAY() 0 - -/** Is the MEM_STRIPE_CONFIG SPR supported? */ -#define CHIP_HAS_MEM_STRIPE_CONFIG() 1 - -/** Are the TLB_PERF SPRs supported? */ -#define CHIP_HAS_TLB_PERF() 1 - -/** Is the VDN_SNOOP_SHIM_CTL SPR supported? */ -#define CHIP_HAS_VDN_SNOOP_SHIM_CTL() 0 - -/** Does the chip support rev1 DMA packets? */ -#define CHIP_HAS_REV1_DMA_PACKETS() 1 - -/** Does the chip have an IPI shim? */ -#define CHIP_HAS_IPI() 1 - -#endif /* !__OPEN_SOURCE__ */ -#endif /* __ARCH_CHIP_H__ */ diff --git a/arch/tile/include/uapi/arch/chip_tilepro.h b/arch/tile/include/uapi/arch/chip_tilepro.h deleted file mode 100644 index a8a3ed144dfe..000000000000 --- a/arch/tile/include/uapi/arch/chip_tilepro.h +++ /dev/null @@ -1,259 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* - * @file - * Global header file. - * This header file specifies defines for TILEPro. - */ - -#ifndef __ARCH_CHIP_H__ -#define __ARCH_CHIP_H__ - -/** Specify chip version. - * When possible, prefer the CHIP_xxx symbols below for future-proofing. - * This is intended for cross-compiling; native compilation should - * use the predefined __tile_chip__ symbol. - */ -#define TILE_CHIP 1 - -/** Specify chip revision. - * This provides for the case of a respin of a particular chip type; - * the normal value for this symbol is "0". - * This is intended for cross-compiling; native compilation should - * use the predefined __tile_chip_rev__ symbol. - */ -#define TILE_CHIP_REV 0 - -/** The name of this architecture. */ -#define CHIP_ARCH_NAME "tilepro" - -/** The ELF e_machine type for binaries for this chip. */ -#define CHIP_ELF_TYPE() EM_TILEPRO - -/** The alternate ELF e_machine type for binaries for this chip. */ -#define CHIP_COMPAT_ELF_TYPE() 0x2507 - -/** What is the native word size of the machine? */ -#define CHIP_WORD_SIZE() 32 - -/** How many bits of a virtual address are used. Extra bits must be - * the sign extension of the low bits. - */ -#define CHIP_VA_WIDTH() 32 - -/** How many bits are in a physical address? */ -#define CHIP_PA_WIDTH() 36 - -/** Size of the L2 cache, in bytes. */ -#define CHIP_L2_CACHE_SIZE() 65536 - -/** Log size of an L2 cache line in bytes. */ -#define CHIP_L2_LOG_LINE_SIZE() 6 - -/** Size of an L2 cache line, in bytes. */ -#define CHIP_L2_LINE_SIZE() (1 << CHIP_L2_LOG_LINE_SIZE()) - -/** Associativity of the L2 cache. */ -#define CHIP_L2_ASSOC() 4 - -/** Size of the L1 data cache, in bytes. */ -#define CHIP_L1D_CACHE_SIZE() 8192 - -/** Log size of an L1 data cache line in bytes. */ -#define CHIP_L1D_LOG_LINE_SIZE() 4 - -/** Size of an L1 data cache line, in bytes. */ -#define CHIP_L1D_LINE_SIZE() (1 << CHIP_L1D_LOG_LINE_SIZE()) - -/** Associativity of the L1 data cache. */ -#define CHIP_L1D_ASSOC() 2 - -/** Size of the L1 instruction cache, in bytes. */ -#define CHIP_L1I_CACHE_SIZE() 16384 - -/** Log size of an L1 instruction cache line in bytes. */ -#define CHIP_L1I_LOG_LINE_SIZE() 6 - -/** Size of an L1 instruction cache line, in bytes. */ -#define CHIP_L1I_LINE_SIZE() (1 << CHIP_L1I_LOG_LINE_SIZE()) - -/** Associativity of the L1 instruction cache. */ -#define CHIP_L1I_ASSOC() 1 - -/** Stride with which flush instructions must be issued. */ -#define CHIP_FLUSH_STRIDE() CHIP_L2_LINE_SIZE() - -/** Stride with which inv instructions must be issued. */ -#define CHIP_INV_STRIDE() CHIP_L2_LINE_SIZE() - -/** Stride with which finv instructions must be issued. */ -#define CHIP_FINV_STRIDE() CHIP_L2_LINE_SIZE() - -/** Can the local cache coherently cache data that is homed elsewhere? */ -#define CHIP_HAS_COHERENT_LOCAL_CACHE() 1 - -/** How many simultaneous outstanding victims can the L2 cache have? */ -#define CHIP_MAX_OUTSTANDING_VICTIMS() 4 - -/** Does the TLB support the NC and NOALLOC bits? */ -#define CHIP_HAS_NC_AND_NOALLOC_BITS() 1 - -/** Does the chip support hash-for-home caching? */ -#define CHIP_HAS_CBOX_HOME_MAP() 1 - -/** Number of entries in the chip's home map tables. */ -#define CHIP_CBOX_HOME_MAP_SIZE() 64 - -/** Do uncacheable requests miss in the cache regardless of whether - * there is matching data? */ -#define CHIP_HAS_ENFORCED_UNCACHEABLE_REQUESTS() 1 - -/** Does the mf instruction wait for victims? */ -#define CHIP_HAS_MF_WAITS_FOR_VICTIMS() 0 - -/** Does the chip have an "inv" instruction that doesn't also flush? */ -#define CHIP_HAS_INV() 1 - -/** Does the chip have a "wh64" instruction? */ -#define CHIP_HAS_WH64() 1 - -/** Does this chip have a 'dword_align' instruction? */ -#define CHIP_HAS_DWORD_ALIGN() 1 - -/** Number of performance counters. */ -#define CHIP_PERFORMANCE_COUNTERS() 4 - -/** Does this chip have auxiliary performance counters? */ -#define CHIP_HAS_AUX_PERF_COUNTERS() 1 - -/** Is the CBOX_MSR1 SPR supported? */ -#define CHIP_HAS_CBOX_MSR1() 1 - -/** Is the TILE_RTF_HWM SPR supported? */ -#define CHIP_HAS_TILE_RTF_HWM() 1 - -/** Is the TILE_WRITE_PENDING SPR supported? */ -#define CHIP_HAS_TILE_WRITE_PENDING() 1 - -/** Is the PROC_STATUS SPR supported? */ -#define CHIP_HAS_PROC_STATUS_SPR() 1 - -/** Is the DSTREAM_PF SPR supported? */ -#define CHIP_HAS_DSTREAM_PF() 0 - -/** Log of the number of mshims we have. */ -#define CHIP_LOG_NUM_MSHIMS() 2 - -/** Are the bases of the interrupt vector areas fixed? */ -#define CHIP_HAS_FIXED_INTVEC_BASE() 1 - -/** Are the interrupt masks split up into 2 SPRs? */ -#define CHIP_HAS_SPLIT_INTR_MASK() 1 - -/** Is the cycle count split up into 2 SPRs? */ -#define CHIP_HAS_SPLIT_CYCLE() 1 - -/** Does the chip have a static network? */ -#define CHIP_HAS_SN() 1 - -/** Does the chip have a static network processor? */ -#define CHIP_HAS_SN_PROC() 0 - -/** Size of the L1 static network processor instruction cache, in bytes. */ -/* #define CHIP_L1SNI_CACHE_SIZE() -- does not apply to chip 1 */ - -/** Does the chip have DMA support in each tile? */ -#define CHIP_HAS_TILE_DMA() 1 - -/** Does the chip have the second revision of the directly accessible - * dynamic networks? This encapsulates a number of characteristics, - * including the absence of the catch-all, the absence of inline message - * tags, the absence of support for network context-switching, and so on. - */ -#define CHIP_HAS_REV1_XDN() 0 - -/** Does the chip have cmpexch and similar (fetchadd, exch, etc.)? */ -#define CHIP_HAS_CMPEXCH() 0 - -/** Does the chip have memory-mapped I/O support? */ -#define CHIP_HAS_MMIO() 0 - -/** Does the chip have post-completion interrupts? */ -#define CHIP_HAS_POST_COMPLETION_INTERRUPTS() 0 - -/** Does the chip have native single step support? */ -#define CHIP_HAS_SINGLE_STEP() 0 - -#ifndef __OPEN_SOURCE__ /* features only relevant to hypervisor-level code */ - -/** How many entries are present in the instruction TLB? */ -#define CHIP_ITLB_ENTRIES() 16 - -/** How many entries are present in the data TLB? */ -#define CHIP_DTLB_ENTRIES() 16 - -/** How many MAF entries does the XAUI shim have? */ -#define CHIP_XAUI_MAF_ENTRIES() 32 - -/** Does the memory shim have a source-id table? */ -#define CHIP_HAS_MSHIM_SRCID_TABLE() 0 - -/** Does the L1 instruction cache clear on reset? */ -#define CHIP_HAS_L1I_CLEAR_ON_RESET() 1 - -/** Does the chip come out of reset with valid coordinates on all tiles? - * Note that if defined, this also implies that the upper left is 1,1. - */ -#define CHIP_HAS_VALID_TILE_COORD_RESET() 1 - -/** Does the chip have unified packet formats? */ -#define CHIP_HAS_UNIFIED_PACKET_FORMATS() 1 - -/** Does the chip support write reordering? */ -#define CHIP_HAS_WRITE_REORDERING() 1 - -/** Does the chip support Y-X routing as well as X-Y? */ -#define CHIP_HAS_Y_X_ROUTING() 1 - -/** Is INTCTRL_3 managed with the correct MPL? */ -#define CHIP_HAS_INTCTRL_3_STATUS_FIX() 1 - -/** Is it possible to configure the chip to be big-endian? */ -#define CHIP_HAS_BIG_ENDIAN_CONFIG() 1 - -/** Is the CACHE_RED_WAY_OVERRIDDEN SPR supported? */ -#define CHIP_HAS_CACHE_RED_WAY_OVERRIDDEN() 1 - -/** Is the DIAG_TRACE_WAY SPR supported? */ -#define CHIP_HAS_DIAG_TRACE_WAY() 1 - -/** Is the MEM_STRIPE_CONFIG SPR supported? */ -#define CHIP_HAS_MEM_STRIPE_CONFIG() 1 - -/** Are the TLB_PERF SPRs supported? */ -#define CHIP_HAS_TLB_PERF() 1 - -/** Is the VDN_SNOOP_SHIM_CTL SPR supported? */ -#define CHIP_HAS_VDN_SNOOP_SHIM_CTL() 1 - -/** Does the chip support rev1 DMA packets? */ -#define CHIP_HAS_REV1_DMA_PACKETS() 1 - -/** Does the chip have an IPI shim? */ -#define CHIP_HAS_IPI() 0 - -#endif /* !__OPEN_SOURCE__ */ -#endif /* __ARCH_CHIP_H__ */ diff --git a/arch/tile/include/uapi/arch/icache.h b/arch/tile/include/uapi/arch/icache.h deleted file mode 100644 index ff85a5d77f16..000000000000 --- a/arch/tile/include/uapi/arch/icache.h +++ /dev/null @@ -1,94 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - */ - -/** - * @file - * - * Support for invalidating bytes in the instruction cache. - */ - -#ifndef __ARCH_ICACHE_H__ -#define __ARCH_ICACHE_H__ - -#include <arch/chip.h> - - -/** - * Invalidate the instruction cache for the given range of memory. - * - * @param addr The start of memory to be invalidated. - * @param size The number of bytes to be invalidated. - * @param page_size The system's page size, e.g. getpagesize() in userspace. - * This value must be a power of two no larger than the page containing - * the code to be invalidated. If the value is smaller than the actual page - * size, this function will still work, but may run slower than necessary. - */ -static __inline void -invalidate_icache(const void* addr, unsigned long size, - unsigned long page_size) -{ - const unsigned long cache_way_size = - CHIP_L1I_CACHE_SIZE() / CHIP_L1I_ASSOC(); - unsigned long max_useful_size; - const char* start, *end; - long num_passes; - - if (__builtin_expect(size == 0, 0)) - return; - -#ifdef __tilegx__ - /* Limit the number of bytes visited to avoid redundant iterations. */ - max_useful_size = (page_size < cache_way_size) ? page_size : cache_way_size; - - /* No PA aliasing is possible, so one pass always suffices. */ - num_passes = 1; -#else - /* Limit the number of bytes visited to avoid redundant iterations. */ - max_useful_size = cache_way_size; - - /* - * Compute how many passes we need (we'll treat 0 as if it were 1). - * This works because we know the page size is a power of two. - */ - num_passes = cache_way_size >> __builtin_ctzl(page_size); -#endif - - if (__builtin_expect(size > max_useful_size, 0)) - size = max_useful_size; - - /* Locate the first and last bytes to be invalidated. */ - start = (const char *)((unsigned long)addr & -CHIP_L1I_LINE_SIZE()); - end = (const char*)addr + size - 1; - - __insn_mf(); - - do - { - const char* p; - - for (p = start; p <= end; p += CHIP_L1I_LINE_SIZE()) - __insn_icoh(p); - - start += page_size; - end += page_size; - } - while (--num_passes > 0); - - __insn_drain(); -} - - -#endif /* __ARCH_ICACHE_H__ */ diff --git a/arch/tile/include/uapi/arch/interrupts.h b/arch/tile/include/uapi/arch/interrupts.h deleted file mode 100644 index c288b5d82b4d..000000000000 --- a/arch/tile/include/uapi/arch/interrupts.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifdef __tilegx__ -#include <arch/interrupts_64.h> -#else -#include <arch/interrupts_32.h> -#endif diff --git a/arch/tile/include/uapi/arch/interrupts_32.h b/arch/tile/include/uapi/arch/interrupts_32.h deleted file mode 100644 index a748752cec16..000000000000 --- a/arch/tile/include/uapi/arch/interrupts_32.h +++ /dev/null @@ -1,310 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef __ARCH_INTERRUPTS_H__ -#define __ARCH_INTERRUPTS_H__ - -#ifndef __KERNEL__ -/** Mask for an interrupt. */ -/* Note: must handle breaking interrupts into high and low words manually. */ -#define INT_MASK_LO(intno) (1 << (intno)) -#define INT_MASK_HI(intno) (1 << ((intno) - 32)) - -#ifndef __ASSEMBLER__ -#define INT_MASK(intno) (1ULL << (intno)) -#endif -#endif - - -/** Where a given interrupt executes */ -#define INTERRUPT_VECTOR(i, pl) (0xFC000000 + ((pl) << 24) + ((i) << 8)) - -/** Where to store a vector for a given interrupt. */ -#define USER_INTERRUPT_VECTOR(i) INTERRUPT_VECTOR(i, 0) - -/** The base address of user-level interrupts. */ -#define USER_INTERRUPT_VECTOR_BASE INTERRUPT_VECTOR(0, 0) - - -/** Additional synthetic interrupt. */ -#define INT_BREAKPOINT (63) - -#define INT_ITLB_MISS 0 -#define INT_MEM_ERROR 1 -#define INT_ILL 2 -#define INT_GPV 3 -#define INT_SN_ACCESS 4 -#define INT_IDN_ACCESS 5 -#define INT_UDN_ACCESS 6 -#define INT_IDN_REFILL 7 -#define INT_UDN_REFILL 8 -#define INT_IDN_COMPLETE 9 -#define INT_UDN_COMPLETE 10 -#define INT_SWINT_3 11 -#define INT_SWINT_2 12 -#define INT_SWINT_1 13 -#define INT_SWINT_0 14 -#define INT_UNALIGN_DATA 15 -#define INT_DTLB_MISS 16 -#define INT_DTLB_ACCESS 17 -#define INT_DMATLB_MISS 18 -#define INT_DMATLB_ACCESS 19 -#define INT_SNITLB_MISS 20 -#define INT_SN_NOTIFY 21 -#define INT_SN_FIREWALL 22 -#define INT_IDN_FIREWALL 23 -#define INT_UDN_FIREWALL 24 -#define INT_TILE_TIMER 25 -#define INT_IDN_TIMER 26 -#define INT_UDN_TIMER 27 -#define INT_DMA_NOTIFY 28 -#define INT_IDN_CA 29 -#define INT_UDN_CA 30 -#define INT_IDN_AVAIL 31 -#define INT_UDN_AVAIL 32 -#define INT_PERF_COUNT 33 -#define INT_INTCTRL_3 34 -#define INT_INTCTRL_2 35 -#define INT_INTCTRL_1 36 -#define INT_INTCTRL_0 37 -#define INT_BOOT_ACCESS 38 -#define INT_WORLD_ACCESS 39 -#define INT_I_ASID 40 -#define INT_D_ASID 41 -#define INT_DMA_ASID 42 -#define INT_SNI_ASID 43 -#define INT_DMA_CPL 44 -#define INT_SN_CPL 45 -#define INT_DOUBLE_FAULT 46 -#define INT_SN_STATIC_ACCESS 47 -#define INT_AUX_PERF_COUNT 48 - -#define NUM_INTERRUPTS 49 - -#ifndef __ASSEMBLER__ -#define QUEUED_INTERRUPTS ( \ - (1ULL << INT_MEM_ERROR) | \ - (1ULL << INT_DMATLB_MISS) | \ - (1ULL << INT_DMATLB_ACCESS) | \ - (1ULL << INT_SNITLB_MISS) | \ - (1ULL << INT_SN_NOTIFY) | \ - (1ULL << INT_SN_FIREWALL) | \ - (1ULL << INT_IDN_FIREWALL) | \ - (1ULL << INT_UDN_FIREWALL) | \ - (1ULL << INT_TILE_TIMER) | \ - (1ULL << INT_IDN_TIMER) | \ - (1ULL << INT_UDN_TIMER) | \ - (1ULL << INT_DMA_NOTIFY) | \ - (1ULL << INT_IDN_CA) | \ - (1ULL << INT_UDN_CA) | \ - (1ULL << INT_IDN_AVAIL) | \ - (1ULL << INT_UDN_AVAIL) | \ - (1ULL << INT_PERF_COUNT) | \ - (1ULL << INT_INTCTRL_3) | \ - (1ULL << INT_INTCTRL_2) | \ - (1ULL << INT_INTCTRL_1) | \ - (1ULL << INT_INTCTRL_0) | \ - (1ULL << INT_BOOT_ACCESS) | \ - (1ULL << INT_WORLD_ACCESS) | \ - (1ULL << INT_I_ASID) | \ - (1ULL << INT_D_ASID) | \ - (1ULL << INT_DMA_ASID) | \ - (1ULL << INT_SNI_ASID) | \ - (1ULL << INT_DMA_CPL) | \ - (1ULL << INT_SN_CPL) | \ - (1ULL << INT_DOUBLE_FAULT) | \ - (1ULL << INT_AUX_PERF_COUNT) | \ - 0) -#define NONQUEUED_INTERRUPTS ( \ - (1ULL << INT_ITLB_MISS) | \ - (1ULL << INT_ILL) | \ - (1ULL << INT_GPV) | \ - (1ULL << INT_SN_ACCESS) | \ - (1ULL << INT_IDN_ACCESS) | \ - (1ULL << INT_UDN_ACCESS) | \ - (1ULL << INT_IDN_REFILL) | \ - (1ULL << INT_UDN_REFILL) | \ - (1ULL << INT_IDN_COMPLETE) | \ - (1ULL << INT_UDN_COMPLETE) | \ - (1ULL << INT_SWINT_3) | \ - (1ULL << INT_SWINT_2) | \ - (1ULL << INT_SWINT_1) | \ - (1ULL << INT_SWINT_0) | \ - (1ULL << INT_UNALIGN_DATA) | \ - (1ULL << INT_DTLB_MISS) | \ - (1ULL << INT_DTLB_ACCESS) | \ - (1ULL << INT_SN_STATIC_ACCESS) | \ - 0) -#define CRITICAL_MASKED_INTERRUPTS ( \ - (1ULL << INT_MEM_ERROR) | \ - (1ULL << INT_DMATLB_MISS) | \ - (1ULL << INT_DMATLB_ACCESS) | \ - (1ULL << INT_SNITLB_MISS) | \ - (1ULL << INT_SN_NOTIFY) | \ - (1ULL << INT_SN_FIREWALL) | \ - (1ULL << INT_IDN_FIREWALL) | \ - (1ULL << INT_UDN_FIREWALL) | \ - (1ULL << INT_TILE_TIMER) | \ - (1ULL << INT_IDN_TIMER) | \ - (1ULL << INT_UDN_TIMER) | \ - (1ULL << INT_DMA_NOTIFY) | \ - (1ULL << INT_IDN_CA) | \ - (1ULL << INT_UDN_CA) | \ - (1ULL << INT_IDN_AVAIL) | \ - (1ULL << INT_UDN_AVAIL) | \ - (1ULL << INT_PERF_COUNT) | \ - (1ULL << INT_INTCTRL_3) | \ - (1ULL << INT_INTCTRL_2) | \ - (1ULL << INT_INTCTRL_1) | \ - (1ULL << INT_INTCTRL_0) | \ - (1ULL << INT_AUX_PERF_COUNT) | \ - 0) -#define CRITICAL_UNMASKED_INTERRUPTS ( \ - (1ULL << INT_ITLB_MISS) | \ - (1ULL << INT_ILL) | \ - (1ULL << INT_GPV) | \ - (1ULL << INT_SN_ACCESS) | \ - (1ULL << INT_IDN_ACCESS) | \ - (1ULL << INT_UDN_ACCESS) | \ - (1ULL << INT_IDN_REFILL) | \ - (1ULL << INT_UDN_REFILL) | \ - (1ULL << INT_IDN_COMPLETE) | \ - (1ULL << INT_UDN_COMPLETE) | \ - (1ULL << INT_SWINT_3) | \ - (1ULL << INT_SWINT_2) | \ - (1ULL << INT_SWINT_1) | \ - (1ULL << INT_SWINT_0) | \ - (1ULL << INT_UNALIGN_DATA) | \ - (1ULL << INT_DTLB_MISS) | \ - (1ULL << INT_DTLB_ACCESS) | \ - (1ULL << INT_BOOT_ACCESS) | \ - (1ULL << INT_WORLD_ACCESS) | \ - (1ULL << INT_I_ASID) | \ - (1ULL << INT_D_ASID) | \ - (1ULL << INT_DMA_ASID) | \ - (1ULL << INT_SNI_ASID) | \ - (1ULL << INT_DMA_CPL) | \ - (1ULL << INT_SN_CPL) | \ - (1ULL << INT_DOUBLE_FAULT) | \ - (1ULL << INT_SN_STATIC_ACCESS) | \ - 0) -#define MASKABLE_INTERRUPTS ( \ - (1ULL << INT_MEM_ERROR) | \ - (1ULL << INT_IDN_REFILL) | \ - (1ULL << INT_UDN_REFILL) | \ - (1ULL << INT_IDN_COMPLETE) | \ - (1ULL << INT_UDN_COMPLETE) | \ - (1ULL << INT_DMATLB_MISS) | \ - (1ULL << INT_DMATLB_ACCESS) | \ - (1ULL << INT_SNITLB_MISS) | \ - (1ULL << INT_SN_NOTIFY) | \ - (1ULL << INT_SN_FIREWALL) | \ - (1ULL << INT_IDN_FIREWALL) | \ - (1ULL << INT_UDN_FIREWALL) | \ - (1ULL << INT_TILE_TIMER) | \ - (1ULL << INT_IDN_TIMER) | \ - (1ULL << INT_UDN_TIMER) | \ - (1ULL << INT_DMA_NOTIFY) | \ - (1ULL << INT_IDN_CA) | \ - (1ULL << INT_UDN_CA) | \ - (1ULL << INT_IDN_AVAIL) | \ - (1ULL << INT_UDN_AVAIL) | \ - (1ULL << INT_PERF_COUNT) | \ - (1ULL << INT_INTCTRL_3) | \ - (1ULL << INT_INTCTRL_2) | \ - (1ULL << INT_INTCTRL_1) | \ - (1ULL << INT_INTCTRL_0) | \ - (1ULL << INT_AUX_PERF_COUNT) | \ - 0) -#define UNMASKABLE_INTERRUPTS ( \ - (1ULL << INT_ITLB_MISS) | \ - (1ULL << INT_ILL) | \ - (1ULL << INT_GPV) | \ - (1ULL << INT_SN_ACCESS) | \ - (1ULL << INT_IDN_ACCESS) | \ - (1ULL << INT_UDN_ACCESS) | \ - (1ULL << INT_SWINT_3) | \ - (1ULL << INT_SWINT_2) | \ - (1ULL << INT_SWINT_1) | \ - (1ULL << INT_SWINT_0) | \ - (1ULL << INT_UNALIGN_DATA) | \ - (1ULL << INT_DTLB_MISS) | \ - (1ULL << INT_DTLB_ACCESS) | \ - (1ULL << INT_BOOT_ACCESS) | \ - (1ULL << INT_WORLD_ACCESS) | \ - (1ULL << INT_I_ASID) | \ - (1ULL << INT_D_ASID) | \ - (1ULL << INT_DMA_ASID) | \ - (1ULL << INT_SNI_ASID) | \ - (1ULL << INT_DMA_CPL) | \ - (1ULL << INT_SN_CPL) | \ - (1ULL << INT_DOUBLE_FAULT) | \ - (1ULL << INT_SN_STATIC_ACCESS) | \ - 0) -#define SYNC_INTERRUPTS ( \ - (1ULL << INT_ITLB_MISS) | \ - (1ULL << INT_ILL) | \ - (1ULL << INT_GPV) | \ - (1ULL << INT_SN_ACCESS) | \ - (1ULL << INT_IDN_ACCESS) | \ - (1ULL << INT_UDN_ACCESS) | \ - (1ULL << INT_IDN_REFILL) | \ - (1ULL << INT_UDN_REFILL) | \ - (1ULL << INT_IDN_COMPLETE) | \ - (1ULL << INT_UDN_COMPLETE) | \ - (1ULL << INT_SWINT_3) | \ - (1ULL << INT_SWINT_2) | \ - (1ULL << INT_SWINT_1) | \ - (1ULL << INT_SWINT_0) | \ - (1ULL << INT_UNALIGN_DATA) | \ - (1ULL << INT_DTLB_MISS) | \ - (1ULL << INT_DTLB_ACCESS) | \ - (1ULL << INT_SN_STATIC_ACCESS) | \ - 0) -#define NON_SYNC_INTERRUPTS ( \ - (1ULL << INT_MEM_ERROR) | \ - (1ULL << INT_DMATLB_MISS) | \ - (1ULL << INT_DMATLB_ACCESS) | \ - (1ULL << INT_SNITLB_MISS) | \ - (1ULL << INT_SN_NOTIFY) | \ - (1ULL << INT_SN_FIREWALL) | \ - (1ULL << INT_IDN_FIREWALL) | \ - (1ULL << INT_UDN_FIREWALL) | \ - (1ULL << INT_TILE_TIMER) | \ - (1ULL << INT_IDN_TIMER) | \ - (1ULL << INT_UDN_TIMER) | \ - (1ULL << INT_DMA_NOTIFY) | \ - (1ULL << INT_IDN_CA) | \ - (1ULL << INT_UDN_CA) | \ - (1ULL << INT_IDN_AVAIL) | \ - (1ULL << INT_UDN_AVAIL) | \ - (1ULL << INT_PERF_COUNT) | \ - (1ULL << INT_INTCTRL_3) | \ - (1ULL << INT_INTCTRL_2) | \ - (1ULL << INT_INTCTRL_1) | \ - (1ULL << INT_INTCTRL_0) | \ - (1ULL << INT_BOOT_ACCESS) | \ - (1ULL << INT_WORLD_ACCESS) | \ - (1ULL << INT_I_ASID) | \ - (1ULL << INT_D_ASID) | \ - (1ULL << INT_DMA_ASID) | \ - (1ULL << INT_SNI_ASID) | \ - (1ULL << INT_DMA_CPL) | \ - (1ULL << INT_SN_CPL) | \ - (1ULL << INT_DOUBLE_FAULT) | \ - (1ULL << INT_AUX_PERF_COUNT) | \ - 0) -#endif /* !__ASSEMBLER__ */ -#endif /* !__ARCH_INTERRUPTS_H__ */ diff --git a/arch/tile/include/uapi/arch/interrupts_64.h b/arch/tile/include/uapi/arch/interrupts_64.h deleted file mode 100644 index 142eaff3c244..000000000000 --- a/arch/tile/include/uapi/arch/interrupts_64.h +++ /dev/null @@ -1,279 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef __ARCH_INTERRUPTS_H__ -#define __ARCH_INTERRUPTS_H__ - -#ifndef __KERNEL__ -/** Mask for an interrupt. */ -#ifdef __ASSEMBLER__ -/* Note: must handle breaking interrupts into high and low words manually. */ -#define INT_MASK(intno) (1 << (intno)) -#else -#define INT_MASK(intno) (1ULL << (intno)) -#endif -#endif - - -/** Where a given interrupt executes */ -#define INTERRUPT_VECTOR(i, pl) (0xFC000000 + ((pl) << 24) + ((i) << 8)) - -/** Where to store a vector for a given interrupt. */ -#define USER_INTERRUPT_VECTOR(i) INTERRUPT_VECTOR(i, 0) - -/** The base address of user-level interrupts. */ -#define USER_INTERRUPT_VECTOR_BASE INTERRUPT_VECTOR(0, 0) - - -/** Additional synthetic interrupt. */ -#define INT_BREAKPOINT (63) - -#define INT_MEM_ERROR 0 -#define INT_SINGLE_STEP_3 1 -#define INT_SINGLE_STEP_2 2 -#define INT_SINGLE_STEP_1 3 -#define INT_SINGLE_STEP_0 4 -#define INT_IDN_COMPLETE 5 -#define INT_UDN_COMPLETE 6 -#define INT_ITLB_MISS 7 -#define INT_ILL 8 -#define INT_GPV 9 -#define INT_IDN_ACCESS 10 -#define INT_UDN_ACCESS 11 -#define INT_SWINT_3 12 -#define INT_SWINT_2 13 -#define INT_SWINT_1 14 -#define INT_SWINT_0 15 -#define INT_ILL_TRANS 16 -#define INT_UNALIGN_DATA 17 -#define INT_DTLB_MISS 18 -#define INT_DTLB_ACCESS 19 -#define INT_IDN_FIREWALL 20 -#define INT_UDN_FIREWALL 21 -#define INT_TILE_TIMER 22 -#define INT_AUX_TILE_TIMER 23 -#define INT_IDN_TIMER 24 -#define INT_UDN_TIMER 25 -#define INT_IDN_AVAIL 26 -#define INT_UDN_AVAIL 27 -#define INT_IPI_3 28 -#define INT_IPI_2 29 -#define INT_IPI_1 30 -#define INT_IPI_0 31 -#define INT_PERF_COUNT 32 -#define INT_AUX_PERF_COUNT 33 -#define INT_INTCTRL_3 34 -#define INT_INTCTRL_2 35 -#define INT_INTCTRL_1 36 -#define INT_INTCTRL_0 37 -#define INT_BOOT_ACCESS 38 -#define INT_WORLD_ACCESS 39 -#define INT_I_ASID 40 -#define INT_D_ASID 41 -#define INT_DOUBLE_FAULT 42 - -#define NUM_INTERRUPTS 43 - -#ifndef __ASSEMBLER__ -#define QUEUED_INTERRUPTS ( \ - (1ULL << INT_MEM_ERROR) | \ - (1ULL << INT_IDN_COMPLETE) | \ - (1ULL << INT_UDN_COMPLETE) | \ - (1ULL << INT_IDN_FIREWALL) | \ - (1ULL << INT_UDN_FIREWALL) | \ - (1ULL << INT_TILE_TIMER) | \ - (1ULL << INT_AUX_TILE_TIMER) | \ - (1ULL << INT_IDN_TIMER) | \ - (1ULL << INT_UDN_TIMER) | \ - (1ULL << INT_IDN_AVAIL) | \ - (1ULL << INT_UDN_AVAIL) | \ - (1ULL << INT_IPI_3) | \ - (1ULL << INT_IPI_2) | \ - (1ULL << INT_IPI_1) | \ - (1ULL << INT_IPI_0) | \ - (1ULL << INT_PERF_COUNT) | \ - (1ULL << INT_AUX_PERF_COUNT) | \ - (1ULL << INT_INTCTRL_3) | \ - (1ULL << INT_INTCTRL_2) | \ - (1ULL << INT_INTCTRL_1) | \ - (1ULL << INT_INTCTRL_0) | \ - (1ULL << INT_BOOT_ACCESS) | \ - (1ULL << INT_WORLD_ACCESS) | \ - (1ULL << INT_I_ASID) | \ - (1ULL << INT_D_ASID) | \ - (1ULL << INT_DOUBLE_FAULT) | \ - 0) -#define NONQUEUED_INTERRUPTS ( \ - (1ULL << INT_SINGLE_STEP_3) | \ - (1ULL << INT_SINGLE_STEP_2) | \ - (1ULL << INT_SINGLE_STEP_1) | \ - (1ULL << INT_SINGLE_STEP_0) | \ - (1ULL << INT_ITLB_MISS) | \ - (1ULL << INT_ILL) | \ - (1ULL << INT_GPV) | \ - (1ULL << INT_IDN_ACCESS) | \ - (1ULL << INT_UDN_ACCESS) | \ - (1ULL << INT_SWINT_3) | \ - (1ULL << INT_SWINT_2) | \ - (1ULL << INT_SWINT_1) | \ - (1ULL << INT_SWINT_0) | \ - (1ULL << INT_ILL_TRANS) | \ - (1ULL << INT_UNALIGN_DATA) | \ - (1ULL << INT_DTLB_MISS) | \ - (1ULL << INT_DTLB_ACCESS) | \ - 0) -#define CRITICAL_MASKED_INTERRUPTS ( \ - (1ULL << INT_MEM_ERROR) | \ - (1ULL << INT_SINGLE_STEP_3) | \ - (1ULL << INT_SINGLE_STEP_2) | \ - (1ULL << INT_SINGLE_STEP_1) | \ - (1ULL << INT_SINGLE_STEP_0) | \ - (1ULL << INT_IDN_COMPLETE) | \ - (1ULL << INT_UDN_COMPLETE) | \ - (1ULL << INT_IDN_FIREWALL) | \ - (1ULL << INT_UDN_FIREWALL) | \ - (1ULL << INT_TILE_TIMER) | \ - (1ULL << INT_AUX_TILE_TIMER) | \ - (1ULL << INT_IDN_TIMER) | \ - (1ULL << INT_UDN_TIMER) | \ - (1ULL << INT_IDN_AVAIL) | \ - (1ULL << INT_UDN_AVAIL) | \ - (1ULL << INT_IPI_3) | \ - (1ULL << INT_IPI_2) | \ - (1ULL << INT_IPI_1) | \ - (1ULL << INT_IPI_0) | \ - (1ULL << INT_PERF_COUNT) | \ - (1ULL << INT_AUX_PERF_COUNT) | \ - (1ULL << INT_INTCTRL_3) | \ - (1ULL << INT_INTCTRL_2) | \ - (1ULL << INT_INTCTRL_1) | \ - (1ULL << INT_INTCTRL_0) | \ - 0) -#define CRITICAL_UNMASKED_INTERRUPTS ( \ - (1ULL << INT_ITLB_MISS) | \ - (1ULL << INT_ILL) | \ - (1ULL << INT_GPV) | \ - (1ULL << INT_IDN_ACCESS) | \ - (1ULL << INT_UDN_ACCESS) | \ - (1ULL << INT_SWINT_3) | \ - (1ULL << INT_SWINT_2) | \ - (1ULL << INT_SWINT_1) | \ - (1ULL << INT_SWINT_0) | \ - (1ULL << INT_ILL_TRANS) | \ - (1ULL << INT_UNALIGN_DATA) | \ - (1ULL << INT_DTLB_MISS) | \ - (1ULL << INT_DTLB_ACCESS) | \ - (1ULL << INT_BOOT_ACCESS) | \ - (1ULL << INT_WORLD_ACCESS) | \ - (1ULL << INT_I_ASID) | \ - (1ULL << INT_D_ASID) | \ - (1ULL << INT_DOUBLE_FAULT) | \ - 0) -#define MASKABLE_INTERRUPTS ( \ - (1ULL << INT_MEM_ERROR) | \ - (1ULL << INT_SINGLE_STEP_3) | \ - (1ULL << INT_SINGLE_STEP_2) | \ - (1ULL << INT_SINGLE_STEP_1) | \ - (1ULL << INT_SINGLE_STEP_0) | \ - (1ULL << INT_IDN_COMPLETE) | \ - (1ULL << INT_UDN_COMPLETE) | \ - (1ULL << INT_IDN_FIREWALL) | \ - (1ULL << INT_UDN_FIREWALL) | \ - (1ULL << INT_TILE_TIMER) | \ - (1ULL << INT_AUX_TILE_TIMER) | \ - (1ULL << INT_IDN_TIMER) | \ - (1ULL << INT_UDN_TIMER) | \ - (1ULL << INT_IDN_AVAIL) | \ - (1ULL << INT_UDN_AVAIL) | \ - (1ULL << INT_IPI_3) | \ - (1ULL << INT_IPI_2) | \ - (1ULL << INT_IPI_1) | \ - (1ULL << INT_IPI_0) | \ - (1ULL << INT_PERF_COUNT) | \ - (1ULL << INT_AUX_PERF_COUNT) | \ - (1ULL << INT_INTCTRL_3) | \ - (1ULL << INT_INTCTRL_2) | \ - (1ULL << INT_INTCTRL_1) | \ - (1ULL << INT_INTCTRL_0) | \ - 0) -#define UNMASKABLE_INTERRUPTS ( \ - (1ULL << INT_ITLB_MISS) | \ - (1ULL << INT_ILL) | \ - (1ULL << INT_GPV) | \ - (1ULL << INT_IDN_ACCESS) | \ - (1ULL << INT_UDN_ACCESS) | \ - (1ULL << INT_SWINT_3) | \ - (1ULL << INT_SWINT_2) | \ - (1ULL << INT_SWINT_1) | \ - (1ULL << INT_SWINT_0) | \ - (1ULL << INT_ILL_TRANS) | \ - (1ULL << INT_UNALIGN_DATA) | \ - (1ULL << INT_DTLB_MISS) | \ - (1ULL << INT_DTLB_ACCESS) | \ - (1ULL << INT_BOOT_ACCESS) | \ - (1ULL << INT_WORLD_ACCESS) | \ - (1ULL << INT_I_ASID) | \ - (1ULL << INT_D_ASID) | \ - (1ULL << INT_DOUBLE_FAULT) | \ - 0) -#define SYNC_INTERRUPTS ( \ - (1ULL << INT_SINGLE_STEP_3) | \ - (1ULL << INT_SINGLE_STEP_2) | \ - (1ULL << INT_SINGLE_STEP_1) | \ - (1ULL << INT_SINGLE_STEP_0) | \ - (1ULL << INT_IDN_COMPLETE) | \ - (1ULL << INT_UDN_COMPLETE) | \ - (1ULL << INT_ITLB_MISS) | \ - (1ULL << INT_ILL) | \ - (1ULL << INT_GPV) | \ - (1ULL << INT_IDN_ACCESS) | \ - (1ULL << INT_UDN_ACCESS) | \ - (1ULL << INT_SWINT_3) | \ - (1ULL << INT_SWINT_2) | \ - (1ULL << INT_SWINT_1) | \ - (1ULL << INT_SWINT_0) | \ - (1ULL << INT_ILL_TRANS) | \ - (1ULL << INT_UNALIGN_DATA) | \ - (1ULL << INT_DTLB_MISS) | \ - (1ULL << INT_DTLB_ACCESS) | \ - 0) -#define NON_SYNC_INTERRUPTS ( \ - (1ULL << INT_MEM_ERROR) | \ - (1ULL << INT_IDN_FIREWALL) | \ - (1ULL << INT_UDN_FIREWALL) | \ - (1ULL << INT_TILE_TIMER) | \ - (1ULL << INT_AUX_TILE_TIMER) | \ - (1ULL << INT_IDN_TIMER) | \ - (1ULL << INT_UDN_TIMER) | \ - (1ULL << INT_IDN_AVAIL) | \ - (1ULL << INT_UDN_AVAIL) | \ - (1ULL << INT_IPI_3) | \ - (1ULL << INT_IPI_2) | \ - (1ULL << INT_IPI_1) | \ - (1ULL << INT_IPI_0) | \ - (1ULL << INT_PERF_COUNT) | \ - (1ULL << INT_AUX_PERF_COUNT) | \ - (1ULL << INT_INTCTRL_3) | \ - (1ULL << INT_INTCTRL_2) | \ - (1ULL << INT_INTCTRL_1) | \ - (1ULL << INT_INTCTRL_0) | \ - (1ULL << INT_BOOT_ACCESS) | \ - (1ULL << INT_WORLD_ACCESS) | \ - (1ULL << INT_I_ASID) | \ - (1ULL << INT_D_ASID) | \ - (1ULL << INT_DOUBLE_FAULT) | \ - 0) -#endif /* !__ASSEMBLER__ */ -#endif /* !__ARCH_INTERRUPTS_H__ */ diff --git a/arch/tile/include/uapi/arch/intreg.h b/arch/tile/include/uapi/arch/intreg.h deleted file mode 100644 index 5387fb645bb8..000000000000 --- a/arch/tile/include/uapi/arch/intreg.h +++ /dev/null @@ -1,71 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2017 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/** - * @file - * - * Provide types and defines for the type that can hold a register, - * in the implementation namespace. - */ - -#ifndef __ARCH_INTREG_H__ -#define __ARCH_INTREG_H__ - -/* - * Get number of bits in a register. __INT_REG_BITS may be defined - * prior to including this header to force a particular bit width. - */ - -#ifndef __INT_REG_BITS -# if defined __tilegx__ -# define __INT_REG_BITS 64 -# elif defined __tilepro__ -# define __INT_REG_BITS 32 -# else -# error Unrecognized architecture -# endif -#endif - -#if __INT_REG_BITS == 64 - -# ifndef __ASSEMBLER__ -/** Unsigned type that can hold a register. */ -typedef unsigned long long __uint_reg_t; - -/** Signed type that can hold a register. */ -typedef long long __int_reg_t; -# endif - -/** String prefix to use for printf(). */ -# define __INT_REG_FMT "ll" - -#elif __INT_REG_BITS == 32 - -# ifndef __ASSEMBLER__ -/** Unsigned type that can hold a register. */ -typedef unsigned long __uint_reg_t; - -/** Signed type that can hold a register. */ -typedef long __int_reg_t; -# endif - -/** String prefix to use for printf(). */ -# define __INT_REG_FMT "l" - -#else -# error Unrecognized value of __INT_REG_BITS -#endif - -#endif /* !__ARCH_INTREG_H__ */ diff --git a/arch/tile/include/uapi/arch/opcode.h b/arch/tile/include/uapi/arch/opcode.h deleted file mode 100644 index a9ce5961a028..000000000000 --- a/arch/tile/include/uapi/arch/opcode.h +++ /dev/null @@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#if defined(__tilepro__) -#include <arch/opcode_tilepro.h> -#elif defined(__tilegx__) -#include <arch/opcode_tilegx.h> -#else -#error Unexpected Tilera chip type -#endif diff --git a/arch/tile/include/uapi/arch/opcode_tilegx.h b/arch/tile/include/uapi/arch/opcode_tilegx.h deleted file mode 100644 index 948ea544567f..000000000000 --- a/arch/tile/include/uapi/arch/opcode_tilegx.h +++ /dev/null @@ -1,1407 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* TILE-Gx opcode information. - * - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * - * - * - * - */ - -#ifndef __ARCH_OPCODE_H__ -#define __ARCH_OPCODE_H__ - -#ifndef __ASSEMBLER__ - -typedef unsigned long long tilegx_bundle_bits; - -/* These are the bits that determine if a bundle is in the X encoding. */ -#define TILEGX_BUNDLE_MODE_MASK ((tilegx_bundle_bits)3 << 62) - -enum -{ - /* Maximum number of instructions in a bundle (2 for X, 3 for Y). */ - TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE = 3, - - /* How many different pipeline encodings are there? X0, X1, Y0, Y1, Y2. */ - TILEGX_NUM_PIPELINE_ENCODINGS = 5, - - /* Log base 2 of TILEGX_BUNDLE_SIZE_IN_BYTES. */ - TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES = 3, - - /* Instructions take this many bytes. */ - TILEGX_BUNDLE_SIZE_IN_BYTES = 1 << TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES, - - /* Log base 2 of TILEGX_BUNDLE_ALIGNMENT_IN_BYTES. */ - TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES = 3, - - /* Bundles should be aligned modulo this number of bytes. */ - TILEGX_BUNDLE_ALIGNMENT_IN_BYTES = - (1 << TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES), - - /* Number of registers (some are magic, such as network I/O). */ - TILEGX_NUM_REGISTERS = 64, -}; - -/* Make a few "tile_" variables to simplify common code between - architectures. */ - -typedef tilegx_bundle_bits tile_bundle_bits; -#define TILE_BUNDLE_SIZE_IN_BYTES TILEGX_BUNDLE_SIZE_IN_BYTES -#define TILE_BUNDLE_ALIGNMENT_IN_BYTES TILEGX_BUNDLE_ALIGNMENT_IN_BYTES -#define TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES \ - TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES -#define TILE_BPT_BUNDLE TILEGX_BPT_BUNDLE - -/* 64-bit pattern for a { bpt ; nop } bundle. */ -#define TILEGX_BPT_BUNDLE 0x286a44ae51485000ULL - -static __inline unsigned int -get_BFEnd_X0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0x3f); -} - -static __inline unsigned int -get_BFOpcodeExtension_X0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 24)) & 0xf); -} - -static __inline unsigned int -get_BFStart_X0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 18)) & 0x3f); -} - -static __inline unsigned int -get_BrOff_X1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 31)) & 0x0000003f) | - (((unsigned int)(n >> 37)) & 0x0001ffc0); -} - -static __inline unsigned int -get_BrType_X1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 54)) & 0x1f); -} - -static __inline unsigned int -get_Dest_Imm8_X1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 31)) & 0x0000003f) | - (((unsigned int)(n >> 43)) & 0x000000c0); -} - -static __inline unsigned int -get_Dest_X0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 0)) & 0x3f); -} - -static __inline unsigned int -get_Dest_X1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 31)) & 0x3f); -} - -static __inline unsigned int -get_Dest_Y0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 0)) & 0x3f); -} - -static __inline unsigned int -get_Dest_Y1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 31)) & 0x3f); -} - -static __inline unsigned int -get_Imm16_X0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0xffff); -} - -static __inline unsigned int -get_Imm16_X1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0xffff); -} - -static __inline unsigned int -get_Imm8OpcodeExtension_X0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 20)) & 0xff); -} - -static __inline unsigned int -get_Imm8OpcodeExtension_X1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 51)) & 0xff); -} - -static __inline unsigned int -get_Imm8_X0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0xff); -} - -static __inline unsigned int -get_Imm8_X1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0xff); -} - -static __inline unsigned int -get_Imm8_Y0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0xff); -} - -static __inline unsigned int -get_Imm8_Y1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0xff); -} - -static __inline unsigned int -get_JumpOff_X1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 31)) & 0x7ffffff); -} - -static __inline unsigned int -get_JumpOpcodeExtension_X1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 58)) & 0x1); -} - -static __inline unsigned int -get_MF_Imm14_X1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 37)) & 0x3fff); -} - -static __inline unsigned int -get_MT_Imm14_X1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 31)) & 0x0000003f) | - (((unsigned int)(n >> 37)) & 0x00003fc0); -} - -static __inline unsigned int -get_Mode(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 62)) & 0x3); -} - -static __inline unsigned int -get_Opcode_X0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 28)) & 0x7); -} - -static __inline unsigned int -get_Opcode_X1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 59)) & 0x7); -} - -static __inline unsigned int -get_Opcode_Y0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 27)) & 0xf); -} - -static __inline unsigned int -get_Opcode_Y1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 58)) & 0xf); -} - -static __inline unsigned int -get_Opcode_Y2(tilegx_bundle_bits n) -{ - return (((n >> 26)) & 0x00000001) | - (((unsigned int)(n >> 56)) & 0x00000002); -} - -static __inline unsigned int -get_RRROpcodeExtension_X0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 18)) & 0x3ff); -} - -static __inline unsigned int -get_RRROpcodeExtension_X1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 49)) & 0x3ff); -} - -static __inline unsigned int -get_RRROpcodeExtension_Y0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 18)) & 0x3); -} - -static __inline unsigned int -get_RRROpcodeExtension_Y1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 49)) & 0x3); -} - -static __inline unsigned int -get_ShAmt_X0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0x3f); -} - -static __inline unsigned int -get_ShAmt_X1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0x3f); -} - -static __inline unsigned int -get_ShAmt_Y0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0x3f); -} - -static __inline unsigned int -get_ShAmt_Y1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0x3f); -} - -static __inline unsigned int -get_ShiftOpcodeExtension_X0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 18)) & 0x3ff); -} - -static __inline unsigned int -get_ShiftOpcodeExtension_X1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 49)) & 0x3ff); -} - -static __inline unsigned int -get_ShiftOpcodeExtension_Y0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 18)) & 0x3); -} - -static __inline unsigned int -get_ShiftOpcodeExtension_Y1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 49)) & 0x3); -} - -static __inline unsigned int -get_SrcA_X0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 6)) & 0x3f); -} - -static __inline unsigned int -get_SrcA_X1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 37)) & 0x3f); -} - -static __inline unsigned int -get_SrcA_Y0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 6)) & 0x3f); -} - -static __inline unsigned int -get_SrcA_Y1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 37)) & 0x3f); -} - -static __inline unsigned int -get_SrcA_Y2(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 20)) & 0x3f); -} - -static __inline unsigned int -get_SrcBDest_Y2(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 51)) & 0x3f); -} - -static __inline unsigned int -get_SrcB_X0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0x3f); -} - -static __inline unsigned int -get_SrcB_X1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0x3f); -} - -static __inline unsigned int -get_SrcB_Y0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0x3f); -} - -static __inline unsigned int -get_SrcB_Y1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0x3f); -} - -static __inline unsigned int -get_UnaryOpcodeExtension_X0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0x3f); -} - -static __inline unsigned int -get_UnaryOpcodeExtension_X1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0x3f); -} - -static __inline unsigned int -get_UnaryOpcodeExtension_Y0(tilegx_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0x3f); -} - -static __inline unsigned int -get_UnaryOpcodeExtension_Y1(tilegx_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0x3f); -} - - -static __inline int -sign_extend(int n, int num_bits) -{ - int shift = (int)(sizeof(int) * 8 - num_bits); - return (n << shift) >> shift; -} - - - -static __inline tilegx_bundle_bits -create_BFEnd_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 12); -} - -static __inline tilegx_bundle_bits -create_BFOpcodeExtension_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0xf) << 24); -} - -static __inline tilegx_bundle_bits -create_BFStart_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 18); -} - -static __inline tilegx_bundle_bits -create_BrOff_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x0000003f)) << 31) | - (((tilegx_bundle_bits)(n & 0x0001ffc0)) << 37); -} - -static __inline tilegx_bundle_bits -create_BrType_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x1f)) << 54); -} - -static __inline tilegx_bundle_bits -create_Dest_Imm8_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x0000003f)) << 31) | - (((tilegx_bundle_bits)(n & 0x000000c0)) << 43); -} - -static __inline tilegx_bundle_bits -create_Dest_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 0); -} - -static __inline tilegx_bundle_bits -create_Dest_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x3f)) << 31); -} - -static __inline tilegx_bundle_bits -create_Dest_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 0); -} - -static __inline tilegx_bundle_bits -create_Dest_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x3f)) << 31); -} - -static __inline tilegx_bundle_bits -create_Imm16_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0xffff) << 12); -} - -static __inline tilegx_bundle_bits -create_Imm16_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0xffff)) << 43); -} - -static __inline tilegx_bundle_bits -create_Imm8OpcodeExtension_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0xff) << 20); -} - -static __inline tilegx_bundle_bits -create_Imm8OpcodeExtension_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0xff)) << 51); -} - -static __inline tilegx_bundle_bits -create_Imm8_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0xff) << 12); -} - -static __inline tilegx_bundle_bits -create_Imm8_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0xff)) << 43); -} - -static __inline tilegx_bundle_bits -create_Imm8_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0xff) << 12); -} - -static __inline tilegx_bundle_bits -create_Imm8_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0xff)) << 43); -} - -static __inline tilegx_bundle_bits -create_JumpOff_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x7ffffff)) << 31); -} - -static __inline tilegx_bundle_bits -create_JumpOpcodeExtension_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x1)) << 58); -} - -static __inline tilegx_bundle_bits -create_MF_Imm14_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x3fff)) << 37); -} - -static __inline tilegx_bundle_bits -create_MT_Imm14_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x0000003f)) << 31) | - (((tilegx_bundle_bits)(n & 0x00003fc0)) << 37); -} - -static __inline tilegx_bundle_bits -create_Mode(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x3)) << 62); -} - -static __inline tilegx_bundle_bits -create_Opcode_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x7) << 28); -} - -static __inline tilegx_bundle_bits -create_Opcode_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x7)) << 59); -} - -static __inline tilegx_bundle_bits -create_Opcode_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0xf) << 27); -} - -static __inline tilegx_bundle_bits -create_Opcode_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0xf)) << 58); -} - -static __inline tilegx_bundle_bits -create_Opcode_Y2(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x00000001) << 26) | - (((tilegx_bundle_bits)(n & 0x00000002)) << 56); -} - -static __inline tilegx_bundle_bits -create_RRROpcodeExtension_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3ff) << 18); -} - -static __inline tilegx_bundle_bits -create_RRROpcodeExtension_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x3ff)) << 49); -} - -static __inline tilegx_bundle_bits -create_RRROpcodeExtension_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3) << 18); -} - -static __inline tilegx_bundle_bits -create_RRROpcodeExtension_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x3)) << 49); -} - -static __inline tilegx_bundle_bits -create_ShAmt_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 12); -} - -static __inline tilegx_bundle_bits -create_ShAmt_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x3f)) << 43); -} - -static __inline tilegx_bundle_bits -create_ShAmt_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 12); -} - -static __inline tilegx_bundle_bits -create_ShAmt_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x3f)) << 43); -} - -static __inline tilegx_bundle_bits -create_ShiftOpcodeExtension_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3ff) << 18); -} - -static __inline tilegx_bundle_bits -create_ShiftOpcodeExtension_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x3ff)) << 49); -} - -static __inline tilegx_bundle_bits -create_ShiftOpcodeExtension_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3) << 18); -} - -static __inline tilegx_bundle_bits -create_ShiftOpcodeExtension_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x3)) << 49); -} - -static __inline tilegx_bundle_bits -create_SrcA_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 6); -} - -static __inline tilegx_bundle_bits -create_SrcA_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x3f)) << 37); -} - -static __inline tilegx_bundle_bits -create_SrcA_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 6); -} - -static __inline tilegx_bundle_bits -create_SrcA_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x3f)) << 37); -} - -static __inline tilegx_bundle_bits -create_SrcA_Y2(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 20); -} - -static __inline tilegx_bundle_bits -create_SrcBDest_Y2(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x3f)) << 51); -} - -static __inline tilegx_bundle_bits -create_SrcB_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 12); -} - -static __inline tilegx_bundle_bits -create_SrcB_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x3f)) << 43); -} - -static __inline tilegx_bundle_bits -create_SrcB_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 12); -} - -static __inline tilegx_bundle_bits -create_SrcB_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x3f)) << 43); -} - -static __inline tilegx_bundle_bits -create_UnaryOpcodeExtension_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 12); -} - -static __inline tilegx_bundle_bits -create_UnaryOpcodeExtension_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x3f)) << 43); -} - -static __inline tilegx_bundle_bits -create_UnaryOpcodeExtension_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 12); -} - -static __inline tilegx_bundle_bits -create_UnaryOpcodeExtension_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilegx_bundle_bits)(n & 0x3f)) << 43); -} - - -enum -{ - ADDI_IMM8_OPCODE_X0 = 1, - ADDI_IMM8_OPCODE_X1 = 1, - ADDI_OPCODE_Y0 = 0, - ADDI_OPCODE_Y1 = 1, - ADDLI_OPCODE_X0 = 1, - ADDLI_OPCODE_X1 = 0, - ADDXI_IMM8_OPCODE_X0 = 2, - ADDXI_IMM8_OPCODE_X1 = 2, - ADDXI_OPCODE_Y0 = 1, - ADDXI_OPCODE_Y1 = 2, - ADDXLI_OPCODE_X0 = 2, - ADDXLI_OPCODE_X1 = 1, - ADDXSC_RRR_0_OPCODE_X0 = 1, - ADDXSC_RRR_0_OPCODE_X1 = 1, - ADDX_RRR_0_OPCODE_X0 = 2, - ADDX_RRR_0_OPCODE_X1 = 2, - ADDX_RRR_0_OPCODE_Y0 = 0, - ADDX_RRR_0_OPCODE_Y1 = 0, - ADD_RRR_0_OPCODE_X0 = 3, - ADD_RRR_0_OPCODE_X1 = 3, - ADD_RRR_0_OPCODE_Y0 = 1, - ADD_RRR_0_OPCODE_Y1 = 1, - ANDI_IMM8_OPCODE_X0 = 3, - ANDI_IMM8_OPCODE_X1 = 3, - ANDI_OPCODE_Y0 = 2, - ANDI_OPCODE_Y1 = 3, - AND_RRR_0_OPCODE_X0 = 4, - AND_RRR_0_OPCODE_X1 = 4, - AND_RRR_5_OPCODE_Y0 = 0, - AND_RRR_5_OPCODE_Y1 = 0, - BEQZT_BRANCH_OPCODE_X1 = 16, - BEQZ_BRANCH_OPCODE_X1 = 17, - BFEXTS_BF_OPCODE_X0 = 4, - BFEXTU_BF_OPCODE_X0 = 5, - BFINS_BF_OPCODE_X0 = 6, - BF_OPCODE_X0 = 3, - BGEZT_BRANCH_OPCODE_X1 = 18, - BGEZ_BRANCH_OPCODE_X1 = 19, - BGTZT_BRANCH_OPCODE_X1 = 20, - BGTZ_BRANCH_OPCODE_X1 = 21, - BLBCT_BRANCH_OPCODE_X1 = 22, - BLBC_BRANCH_OPCODE_X1 = 23, - BLBST_BRANCH_OPCODE_X1 = 24, - BLBS_BRANCH_OPCODE_X1 = 25, - BLEZT_BRANCH_OPCODE_X1 = 26, - BLEZ_BRANCH_OPCODE_X1 = 27, - BLTZT_BRANCH_OPCODE_X1 = 28, - BLTZ_BRANCH_OPCODE_X1 = 29, - BNEZT_BRANCH_OPCODE_X1 = 30, - BNEZ_BRANCH_OPCODE_X1 = 31, - BRANCH_OPCODE_X1 = 2, - CMOVEQZ_RRR_0_OPCODE_X0 = 5, - CMOVEQZ_RRR_4_OPCODE_Y0 = 0, - CMOVNEZ_RRR_0_OPCODE_X0 = 6, - CMOVNEZ_RRR_4_OPCODE_Y0 = 1, - CMPEQI_IMM8_OPCODE_X0 = 4, - CMPEQI_IMM8_OPCODE_X1 = 4, - CMPEQI_OPCODE_Y0 = 3, - CMPEQI_OPCODE_Y1 = 4, - CMPEQ_RRR_0_OPCODE_X0 = 7, - CMPEQ_RRR_0_OPCODE_X1 = 5, - CMPEQ_RRR_3_OPCODE_Y0 = 0, - CMPEQ_RRR_3_OPCODE_Y1 = 2, - CMPEXCH4_RRR_0_OPCODE_X1 = 6, - CMPEXCH_RRR_0_OPCODE_X1 = 7, - CMPLES_RRR_0_OPCODE_X0 = 8, - CMPLES_RRR_0_OPCODE_X1 = 8, - CMPLES_RRR_2_OPCODE_Y0 = 0, - CMPLES_RRR_2_OPCODE_Y1 = 0, - CMPLEU_RRR_0_OPCODE_X0 = 9, - CMPLEU_RRR_0_OPCODE_X1 = 9, - CMPLEU_RRR_2_OPCODE_Y0 = 1, - CMPLEU_RRR_2_OPCODE_Y1 = 1, - CMPLTSI_IMM8_OPCODE_X0 = 5, - CMPLTSI_IMM8_OPCODE_X1 = 5, - CMPLTSI_OPCODE_Y0 = 4, - CMPLTSI_OPCODE_Y1 = 5, - CMPLTS_RRR_0_OPCODE_X0 = 10, - CMPLTS_RRR_0_OPCODE_X1 = 10, - CMPLTS_RRR_2_OPCODE_Y0 = 2, - CMPLTS_RRR_2_OPCODE_Y1 = 2, - CMPLTUI_IMM8_OPCODE_X0 = 6, - CMPLTUI_IMM8_OPCODE_X1 = 6, - CMPLTU_RRR_0_OPCODE_X0 = 11, - CMPLTU_RRR_0_OPCODE_X1 = 11, - CMPLTU_RRR_2_OPCODE_Y0 = 3, - CMPLTU_RRR_2_OPCODE_Y1 = 3, - CMPNE_RRR_0_OPCODE_X0 = 12, - CMPNE_RRR_0_OPCODE_X1 = 12, - CMPNE_RRR_3_OPCODE_Y0 = 1, - CMPNE_RRR_3_OPCODE_Y1 = 3, - CMULAF_RRR_0_OPCODE_X0 = 13, - CMULA_RRR_0_OPCODE_X0 = 14, - CMULFR_RRR_0_OPCODE_X0 = 15, - CMULF_RRR_0_OPCODE_X0 = 16, - CMULHR_RRR_0_OPCODE_X0 = 17, - CMULH_RRR_0_OPCODE_X0 = 18, - CMUL_RRR_0_OPCODE_X0 = 19, - CNTLZ_UNARY_OPCODE_X0 = 1, - CNTLZ_UNARY_OPCODE_Y0 = 1, - CNTTZ_UNARY_OPCODE_X0 = 2, - CNTTZ_UNARY_OPCODE_Y0 = 2, - CRC32_32_RRR_0_OPCODE_X0 = 20, - CRC32_8_RRR_0_OPCODE_X0 = 21, - DBLALIGN2_RRR_0_OPCODE_X0 = 22, - DBLALIGN2_RRR_0_OPCODE_X1 = 13, - DBLALIGN4_RRR_0_OPCODE_X0 = 23, - DBLALIGN4_RRR_0_OPCODE_X1 = 14, - DBLALIGN6_RRR_0_OPCODE_X0 = 24, - DBLALIGN6_RRR_0_OPCODE_X1 = 15, - DBLALIGN_RRR_0_OPCODE_X0 = 25, - DRAIN_UNARY_OPCODE_X1 = 1, - DTLBPR_UNARY_OPCODE_X1 = 2, - EXCH4_RRR_0_OPCODE_X1 = 16, - EXCH_RRR_0_OPCODE_X1 = 17, - FDOUBLE_ADDSUB_RRR_0_OPCODE_X0 = 26, - FDOUBLE_ADD_FLAGS_RRR_0_OPCODE_X0 = 27, - FDOUBLE_MUL_FLAGS_RRR_0_OPCODE_X0 = 28, - FDOUBLE_PACK1_RRR_0_OPCODE_X0 = 29, - FDOUBLE_PACK2_RRR_0_OPCODE_X0 = 30, - FDOUBLE_SUB_FLAGS_RRR_0_OPCODE_X0 = 31, - FDOUBLE_UNPACK_MAX_RRR_0_OPCODE_X0 = 32, - FDOUBLE_UNPACK_MIN_RRR_0_OPCODE_X0 = 33, - FETCHADD4_RRR_0_OPCODE_X1 = 18, - FETCHADDGEZ4_RRR_0_OPCODE_X1 = 19, - FETCHADDGEZ_RRR_0_OPCODE_X1 = 20, - FETCHADD_RRR_0_OPCODE_X1 = 21, - FETCHAND4_RRR_0_OPCODE_X1 = 22, - FETCHAND_RRR_0_OPCODE_X1 = 23, - FETCHOR4_RRR_0_OPCODE_X1 = 24, - FETCHOR_RRR_0_OPCODE_X1 = 25, - FINV_UNARY_OPCODE_X1 = 3, - FLUSHWB_UNARY_OPCODE_X1 = 4, - FLUSH_UNARY_OPCODE_X1 = 5, - FNOP_UNARY_OPCODE_X0 = 3, - FNOP_UNARY_OPCODE_X1 = 6, - FNOP_UNARY_OPCODE_Y0 = 3, - FNOP_UNARY_OPCODE_Y1 = 8, - FSINGLE_ADD1_RRR_0_OPCODE_X0 = 34, - FSINGLE_ADDSUB2_RRR_0_OPCODE_X0 = 35, - FSINGLE_MUL1_RRR_0_OPCODE_X0 = 36, - FSINGLE_MUL2_RRR_0_OPCODE_X0 = 37, - FSINGLE_PACK1_UNARY_OPCODE_X0 = 4, - FSINGLE_PACK1_UNARY_OPCODE_Y0 = 4, - FSINGLE_PACK2_RRR_0_OPCODE_X0 = 38, - FSINGLE_SUB1_RRR_0_OPCODE_X0 = 39, - ICOH_UNARY_OPCODE_X1 = 7, - ILL_UNARY_OPCODE_X1 = 8, - ILL_UNARY_OPCODE_Y1 = 9, - IMM8_OPCODE_X0 = 4, - IMM8_OPCODE_X1 = 3, - INV_UNARY_OPCODE_X1 = 9, - IRET_UNARY_OPCODE_X1 = 10, - JALRP_UNARY_OPCODE_X1 = 11, - JALRP_UNARY_OPCODE_Y1 = 10, - JALR_UNARY_OPCODE_X1 = 12, - JALR_UNARY_OPCODE_Y1 = 11, - JAL_JUMP_OPCODE_X1 = 0, - JRP_UNARY_OPCODE_X1 = 13, - JRP_UNARY_OPCODE_Y1 = 12, - JR_UNARY_OPCODE_X1 = 14, - JR_UNARY_OPCODE_Y1 = 13, - JUMP_OPCODE_X1 = 4, - J_JUMP_OPCODE_X1 = 1, - LD1S_ADD_IMM8_OPCODE_X1 = 7, - LD1S_OPCODE_Y2 = 0, - LD1S_UNARY_OPCODE_X1 = 15, - LD1U_ADD_IMM8_OPCODE_X1 = 8, - LD1U_OPCODE_Y2 = 1, - LD1U_UNARY_OPCODE_X1 = 16, - LD2S_ADD_IMM8_OPCODE_X1 = 9, - LD2S_OPCODE_Y2 = 2, - LD2S_UNARY_OPCODE_X1 = 17, - LD2U_ADD_IMM8_OPCODE_X1 = 10, - LD2U_OPCODE_Y2 = 3, - LD2U_UNARY_OPCODE_X1 = 18, - LD4S_ADD_IMM8_OPCODE_X1 = 11, - LD4S_OPCODE_Y2 = 1, - LD4S_UNARY_OPCODE_X1 = 19, - LD4U_ADD_IMM8_OPCODE_X1 = 12, - LD4U_OPCODE_Y2 = 2, - LD4U_UNARY_OPCODE_X1 = 20, - LDNA_ADD_IMM8_OPCODE_X1 = 21, - LDNA_UNARY_OPCODE_X1 = 21, - LDNT1S_ADD_IMM8_OPCODE_X1 = 13, - LDNT1S_UNARY_OPCODE_X1 = 22, - LDNT1U_ADD_IMM8_OPCODE_X1 = 14, - LDNT1U_UNARY_OPCODE_X1 = 23, - LDNT2S_ADD_IMM8_OPCODE_X1 = 15, - LDNT2S_UNARY_OPCODE_X1 = 24, - LDNT2U_ADD_IMM8_OPCODE_X1 = 16, - LDNT2U_UNARY_OPCODE_X1 = 25, - LDNT4S_ADD_IMM8_OPCODE_X1 = 17, - LDNT4S_UNARY_OPCODE_X1 = 26, - LDNT4U_ADD_IMM8_OPCODE_X1 = 18, - LDNT4U_UNARY_OPCODE_X1 = 27, - LDNT_ADD_IMM8_OPCODE_X1 = 19, - LDNT_UNARY_OPCODE_X1 = 28, - LD_ADD_IMM8_OPCODE_X1 = 20, - LD_OPCODE_Y2 = 3, - LD_UNARY_OPCODE_X1 = 29, - LNK_UNARY_OPCODE_X1 = 30, - LNK_UNARY_OPCODE_Y1 = 14, - MFSPR_IMM8_OPCODE_X1 = 22, - MF_UNARY_OPCODE_X1 = 31, - MM_BF_OPCODE_X0 = 7, - MNZ_RRR_0_OPCODE_X0 = 40, - MNZ_RRR_0_OPCODE_X1 = 26, - MNZ_RRR_4_OPCODE_Y0 = 2, - MNZ_RRR_4_OPCODE_Y1 = 2, - MODE_OPCODE_YA2 = 1, - MODE_OPCODE_YB2 = 2, - MODE_OPCODE_YC2 = 3, - MTSPR_IMM8_OPCODE_X1 = 23, - MULAX_RRR_0_OPCODE_X0 = 41, - MULAX_RRR_3_OPCODE_Y0 = 2, - MULA_HS_HS_RRR_0_OPCODE_X0 = 42, - MULA_HS_HS_RRR_9_OPCODE_Y0 = 0, - MULA_HS_HU_RRR_0_OPCODE_X0 = 43, - MULA_HS_LS_RRR_0_OPCODE_X0 = 44, - MULA_HS_LU_RRR_0_OPCODE_X0 = 45, - MULA_HU_HU_RRR_0_OPCODE_X0 = 46, - MULA_HU_HU_RRR_9_OPCODE_Y0 = 1, - MULA_HU_LS_RRR_0_OPCODE_X0 = 47, - MULA_HU_LU_RRR_0_OPCODE_X0 = 48, - MULA_LS_LS_RRR_0_OPCODE_X0 = 49, - MULA_LS_LS_RRR_9_OPCODE_Y0 = 2, - MULA_LS_LU_RRR_0_OPCODE_X0 = 50, - MULA_LU_LU_RRR_0_OPCODE_X0 = 51, - MULA_LU_LU_RRR_9_OPCODE_Y0 = 3, - MULX_RRR_0_OPCODE_X0 = 52, - MULX_RRR_3_OPCODE_Y0 = 3, - MUL_HS_HS_RRR_0_OPCODE_X0 = 53, - MUL_HS_HS_RRR_8_OPCODE_Y0 = 0, - MUL_HS_HU_RRR_0_OPCODE_X0 = 54, - MUL_HS_LS_RRR_0_OPCODE_X0 = 55, - MUL_HS_LU_RRR_0_OPCODE_X0 = 56, - MUL_HU_HU_RRR_0_OPCODE_X0 = 57, - MUL_HU_HU_RRR_8_OPCODE_Y0 = 1, - MUL_HU_LS_RRR_0_OPCODE_X0 = 58, - MUL_HU_LU_RRR_0_OPCODE_X0 = 59, - MUL_LS_LS_RRR_0_OPCODE_X0 = 60, - MUL_LS_LS_RRR_8_OPCODE_Y0 = 2, - MUL_LS_LU_RRR_0_OPCODE_X0 = 61, - MUL_LU_LU_RRR_0_OPCODE_X0 = 62, - MUL_LU_LU_RRR_8_OPCODE_Y0 = 3, - MZ_RRR_0_OPCODE_X0 = 63, - MZ_RRR_0_OPCODE_X1 = 27, - MZ_RRR_4_OPCODE_Y0 = 3, - MZ_RRR_4_OPCODE_Y1 = 3, - NAP_UNARY_OPCODE_X1 = 32, - NOP_UNARY_OPCODE_X0 = 5, - NOP_UNARY_OPCODE_X1 = 33, - NOP_UNARY_OPCODE_Y0 = 5, - NOP_UNARY_OPCODE_Y1 = 15, - NOR_RRR_0_OPCODE_X0 = 64, - NOR_RRR_0_OPCODE_X1 = 28, - NOR_RRR_5_OPCODE_Y0 = 1, - NOR_RRR_5_OPCODE_Y1 = 1, - ORI_IMM8_OPCODE_X0 = 7, - ORI_IMM8_OPCODE_X1 = 24, - OR_RRR_0_OPCODE_X0 = 65, - OR_RRR_0_OPCODE_X1 = 29, - OR_RRR_5_OPCODE_Y0 = 2, - OR_RRR_5_OPCODE_Y1 = 2, - PCNT_UNARY_OPCODE_X0 = 6, - PCNT_UNARY_OPCODE_Y0 = 6, - REVBITS_UNARY_OPCODE_X0 = 7, - REVBITS_UNARY_OPCODE_Y0 = 7, - REVBYTES_UNARY_OPCODE_X0 = 8, - REVBYTES_UNARY_OPCODE_Y0 = 8, - ROTLI_SHIFT_OPCODE_X0 = 1, - ROTLI_SHIFT_OPCODE_X1 = 1, - ROTLI_SHIFT_OPCODE_Y0 = 0, - ROTLI_SHIFT_OPCODE_Y1 = 0, - ROTL_RRR_0_OPCODE_X0 = 66, - ROTL_RRR_0_OPCODE_X1 = 30, - ROTL_RRR_6_OPCODE_Y0 = 0, - ROTL_RRR_6_OPCODE_Y1 = 0, - RRR_0_OPCODE_X0 = 5, - RRR_0_OPCODE_X1 = 5, - RRR_0_OPCODE_Y0 = 5, - RRR_0_OPCODE_Y1 = 6, - RRR_1_OPCODE_Y0 = 6, - RRR_1_OPCODE_Y1 = 7, - RRR_2_OPCODE_Y0 = 7, - RRR_2_OPCODE_Y1 = 8, - RRR_3_OPCODE_Y0 = 8, - RRR_3_OPCODE_Y1 = 9, - RRR_4_OPCODE_Y0 = 9, - RRR_4_OPCODE_Y1 = 10, - RRR_5_OPCODE_Y0 = 10, - RRR_5_OPCODE_Y1 = 11, - RRR_6_OPCODE_Y0 = 11, - RRR_6_OPCODE_Y1 = 12, - RRR_7_OPCODE_Y0 = 12, - RRR_7_OPCODE_Y1 = 13, - RRR_8_OPCODE_Y0 = 13, - RRR_9_OPCODE_Y0 = 14, - SHIFT_OPCODE_X0 = 6, - SHIFT_OPCODE_X1 = 6, - SHIFT_OPCODE_Y0 = 15, - SHIFT_OPCODE_Y1 = 14, - SHL16INSLI_OPCODE_X0 = 7, - SHL16INSLI_OPCODE_X1 = 7, - SHL1ADDX_RRR_0_OPCODE_X0 = 67, - SHL1ADDX_RRR_0_OPCODE_X1 = 31, - SHL1ADDX_RRR_7_OPCODE_Y0 = 1, - SHL1ADDX_RRR_7_OPCODE_Y1 = 1, - SHL1ADD_RRR_0_OPCODE_X0 = 68, - SHL1ADD_RRR_0_OPCODE_X1 = 32, - SHL1ADD_RRR_1_OPCODE_Y0 = 0, - SHL1ADD_RRR_1_OPCODE_Y1 = 0, - SHL2ADDX_RRR_0_OPCODE_X0 = 69, - SHL2ADDX_RRR_0_OPCODE_X1 = 33, - SHL2ADDX_RRR_7_OPCODE_Y0 = 2, - SHL2ADDX_RRR_7_OPCODE_Y1 = 2, - SHL2ADD_RRR_0_OPCODE_X0 = 70, - SHL2ADD_RRR_0_OPCODE_X1 = 34, - SHL2ADD_RRR_1_OPCODE_Y0 = 1, - SHL2ADD_RRR_1_OPCODE_Y1 = 1, - SHL3ADDX_RRR_0_OPCODE_X0 = 71, - SHL3ADDX_RRR_0_OPCODE_X1 = 35, - SHL3ADDX_RRR_7_OPCODE_Y0 = 3, - SHL3ADDX_RRR_7_OPCODE_Y1 = 3, - SHL3ADD_RRR_0_OPCODE_X0 = 72, - SHL3ADD_RRR_0_OPCODE_X1 = 36, - SHL3ADD_RRR_1_OPCODE_Y0 = 2, - SHL3ADD_RRR_1_OPCODE_Y1 = 2, - SHLI_SHIFT_OPCODE_X0 = 2, - SHLI_SHIFT_OPCODE_X1 = 2, - SHLI_SHIFT_OPCODE_Y0 = 1, - SHLI_SHIFT_OPCODE_Y1 = 1, - SHLXI_SHIFT_OPCODE_X0 = 3, - SHLXI_SHIFT_OPCODE_X1 = 3, - SHLX_RRR_0_OPCODE_X0 = 73, - SHLX_RRR_0_OPCODE_X1 = 37, - SHL_RRR_0_OPCODE_X0 = 74, - SHL_RRR_0_OPCODE_X1 = 38, - SHL_RRR_6_OPCODE_Y0 = 1, - SHL_RRR_6_OPCODE_Y1 = 1, - SHRSI_SHIFT_OPCODE_X0 = 4, - SHRSI_SHIFT_OPCODE_X1 = 4, - SHRSI_SHIFT_OPCODE_Y0 = 2, - SHRSI_SHIFT_OPCODE_Y1 = 2, - SHRS_RRR_0_OPCODE_X0 = 75, - SHRS_RRR_0_OPCODE_X1 = 39, - SHRS_RRR_6_OPCODE_Y0 = 2, - SHRS_RRR_6_OPCODE_Y1 = 2, - SHRUI_SHIFT_OPCODE_X0 = 5, - SHRUI_SHIFT_OPCODE_X1 = 5, - SHRUI_SHIFT_OPCODE_Y0 = 3, - SHRUI_SHIFT_OPCODE_Y1 = 3, - SHRUXI_SHIFT_OPCODE_X0 = 6, - SHRUXI_SHIFT_OPCODE_X1 = 6, - SHRUX_RRR_0_OPCODE_X0 = 76, - SHRUX_RRR_0_OPCODE_X1 = 40, - SHRU_RRR_0_OPCODE_X0 = 77, - SHRU_RRR_0_OPCODE_X1 = 41, - SHRU_RRR_6_OPCODE_Y0 = 3, - SHRU_RRR_6_OPCODE_Y1 = 3, - SHUFFLEBYTES_RRR_0_OPCODE_X0 = 78, - ST1_ADD_IMM8_OPCODE_X1 = 25, - ST1_OPCODE_Y2 = 0, - ST1_RRR_0_OPCODE_X1 = 42, - ST2_ADD_IMM8_OPCODE_X1 = 26, - ST2_OPCODE_Y2 = 1, - ST2_RRR_0_OPCODE_X1 = 43, - ST4_ADD_IMM8_OPCODE_X1 = 27, - ST4_OPCODE_Y2 = 2, - ST4_RRR_0_OPCODE_X1 = 44, - STNT1_ADD_IMM8_OPCODE_X1 = 28, - STNT1_RRR_0_OPCODE_X1 = 45, - STNT2_ADD_IMM8_OPCODE_X1 = 29, - STNT2_RRR_0_OPCODE_X1 = 46, - STNT4_ADD_IMM8_OPCODE_X1 = 30, - STNT4_RRR_0_OPCODE_X1 = 47, - STNT_ADD_IMM8_OPCODE_X1 = 31, - STNT_RRR_0_OPCODE_X1 = 48, - ST_ADD_IMM8_OPCODE_X1 = 32, - ST_OPCODE_Y2 = 3, - ST_RRR_0_OPCODE_X1 = 49, - SUBXSC_RRR_0_OPCODE_X0 = 79, - SUBXSC_RRR_0_OPCODE_X1 = 50, - SUBX_RRR_0_OPCODE_X0 = 80, - SUBX_RRR_0_OPCODE_X1 = 51, - SUBX_RRR_0_OPCODE_Y0 = 2, - SUBX_RRR_0_OPCODE_Y1 = 2, - SUB_RRR_0_OPCODE_X0 = 81, - SUB_RRR_0_OPCODE_X1 = 52, - SUB_RRR_0_OPCODE_Y0 = 3, - SUB_RRR_0_OPCODE_Y1 = 3, - SWINT0_UNARY_OPCODE_X1 = 34, - SWINT1_UNARY_OPCODE_X1 = 35, - SWINT2_UNARY_OPCODE_X1 = 36, - SWINT3_UNARY_OPCODE_X1 = 37, - TBLIDXB0_UNARY_OPCODE_X0 = 9, - TBLIDXB0_UNARY_OPCODE_Y0 = 9, - TBLIDXB1_UNARY_OPCODE_X0 = 10, - TBLIDXB1_UNARY_OPCODE_Y0 = 10, - TBLIDXB2_UNARY_OPCODE_X0 = 11, - TBLIDXB2_UNARY_OPCODE_Y0 = 11, - TBLIDXB3_UNARY_OPCODE_X0 = 12, - TBLIDXB3_UNARY_OPCODE_Y0 = 12, - UNARY_RRR_0_OPCODE_X0 = 82, - UNARY_RRR_0_OPCODE_X1 = 53, - UNARY_RRR_1_OPCODE_Y0 = 3, - UNARY_RRR_1_OPCODE_Y1 = 3, - V1ADDI_IMM8_OPCODE_X0 = 8, - V1ADDI_IMM8_OPCODE_X1 = 33, - V1ADDUC_RRR_0_OPCODE_X0 = 83, - V1ADDUC_RRR_0_OPCODE_X1 = 54, - V1ADD_RRR_0_OPCODE_X0 = 84, - V1ADD_RRR_0_OPCODE_X1 = 55, - V1ADIFFU_RRR_0_OPCODE_X0 = 85, - V1AVGU_RRR_0_OPCODE_X0 = 86, - V1CMPEQI_IMM8_OPCODE_X0 = 9, - V1CMPEQI_IMM8_OPCODE_X1 = 34, - V1CMPEQ_RRR_0_OPCODE_X0 = 87, - V1CMPEQ_RRR_0_OPCODE_X1 = 56, - V1CMPLES_RRR_0_OPCODE_X0 = 88, - V1CMPLES_RRR_0_OPCODE_X1 = 57, - V1CMPLEU_RRR_0_OPCODE_X0 = 89, - V1CMPLEU_RRR_0_OPCODE_X1 = 58, - V1CMPLTSI_IMM8_OPCODE_X0 = 10, - V1CMPLTSI_IMM8_OPCODE_X1 = 35, - V1CMPLTS_RRR_0_OPCODE_X0 = 90, - V1CMPLTS_RRR_0_OPCODE_X1 = 59, - V1CMPLTUI_IMM8_OPCODE_X0 = 11, - V1CMPLTUI_IMM8_OPCODE_X1 = 36, - V1CMPLTU_RRR_0_OPCODE_X0 = 91, - V1CMPLTU_RRR_0_OPCODE_X1 = 60, - V1CMPNE_RRR_0_OPCODE_X0 = 92, - V1CMPNE_RRR_0_OPCODE_X1 = 61, - V1DDOTPUA_RRR_0_OPCODE_X0 = 161, - V1DDOTPUSA_RRR_0_OPCODE_X0 = 93, - V1DDOTPUS_RRR_0_OPCODE_X0 = 94, - V1DDOTPU_RRR_0_OPCODE_X0 = 162, - V1DOTPA_RRR_0_OPCODE_X0 = 95, - V1DOTPUA_RRR_0_OPCODE_X0 = 163, - V1DOTPUSA_RRR_0_OPCODE_X0 = 96, - V1DOTPUS_RRR_0_OPCODE_X0 = 97, - V1DOTPU_RRR_0_OPCODE_X0 = 164, - V1DOTP_RRR_0_OPCODE_X0 = 98, - V1INT_H_RRR_0_OPCODE_X0 = 99, - V1INT_H_RRR_0_OPCODE_X1 = 62, - V1INT_L_RRR_0_OPCODE_X0 = 100, - V1INT_L_RRR_0_OPCODE_X1 = 63, - V1MAXUI_IMM8_OPCODE_X0 = 12, - V1MAXUI_IMM8_OPCODE_X1 = 37, - V1MAXU_RRR_0_OPCODE_X0 = 101, - V1MAXU_RRR_0_OPCODE_X1 = 64, - V1MINUI_IMM8_OPCODE_X0 = 13, - V1MINUI_IMM8_OPCODE_X1 = 38, - V1MINU_RRR_0_OPCODE_X0 = 102, - V1MINU_RRR_0_OPCODE_X1 = 65, - V1MNZ_RRR_0_OPCODE_X0 = 103, - V1MNZ_RRR_0_OPCODE_X1 = 66, - V1MULTU_RRR_0_OPCODE_X0 = 104, - V1MULUS_RRR_0_OPCODE_X0 = 105, - V1MULU_RRR_0_OPCODE_X0 = 106, - V1MZ_RRR_0_OPCODE_X0 = 107, - V1MZ_RRR_0_OPCODE_X1 = 67, - V1SADAU_RRR_0_OPCODE_X0 = 108, - V1SADU_RRR_0_OPCODE_X0 = 109, - V1SHLI_SHIFT_OPCODE_X0 = 7, - V1SHLI_SHIFT_OPCODE_X1 = 7, - V1SHL_RRR_0_OPCODE_X0 = 110, - V1SHL_RRR_0_OPCODE_X1 = 68, - V1SHRSI_SHIFT_OPCODE_X0 = 8, - V1SHRSI_SHIFT_OPCODE_X1 = 8, - V1SHRS_RRR_0_OPCODE_X0 = 111, - V1SHRS_RRR_0_OPCODE_X1 = 69, - V1SHRUI_SHIFT_OPCODE_X0 = 9, - V1SHRUI_SHIFT_OPCODE_X1 = 9, - V1SHRU_RRR_0_OPCODE_X0 = 112, - V1SHRU_RRR_0_OPCODE_X1 = 70, - V1SUBUC_RRR_0_OPCODE_X0 = 113, - V1SUBUC_RRR_0_OPCODE_X1 = 71, - V1SUB_RRR_0_OPCODE_X0 = 114, - V1SUB_RRR_0_OPCODE_X1 = 72, - V2ADDI_IMM8_OPCODE_X0 = 14, - V2ADDI_IMM8_OPCODE_X1 = 39, - V2ADDSC_RRR_0_OPCODE_X0 = 115, - V2ADDSC_RRR_0_OPCODE_X1 = 73, - V2ADD_RRR_0_OPCODE_X0 = 116, - V2ADD_RRR_0_OPCODE_X1 = 74, - V2ADIFFS_RRR_0_OPCODE_X0 = 117, - V2AVGS_RRR_0_OPCODE_X0 = 118, - V2CMPEQI_IMM8_OPCODE_X0 = 15, - V2CMPEQI_IMM8_OPCODE_X1 = 40, - V2CMPEQ_RRR_0_OPCODE_X0 = 119, - V2CMPEQ_RRR_0_OPCODE_X1 = 75, - V2CMPLES_RRR_0_OPCODE_X0 = 120, - V2CMPLES_RRR_0_OPCODE_X1 = 76, - V2CMPLEU_RRR_0_OPCODE_X0 = 121, - V2CMPLEU_RRR_0_OPCODE_X1 = 77, - V2CMPLTSI_IMM8_OPCODE_X0 = 16, - V2CMPLTSI_IMM8_OPCODE_X1 = 41, - V2CMPLTS_RRR_0_OPCODE_X0 = 122, - V2CMPLTS_RRR_0_OPCODE_X1 = 78, - V2CMPLTUI_IMM8_OPCODE_X0 = 17, - V2CMPLTUI_IMM8_OPCODE_X1 = 42, - V2CMPLTU_RRR_0_OPCODE_X0 = 123, - V2CMPLTU_RRR_0_OPCODE_X1 = 79, - V2CMPNE_RRR_0_OPCODE_X0 = 124, - V2CMPNE_RRR_0_OPCODE_X1 = 80, - V2DOTPA_RRR_0_OPCODE_X0 = 125, - V2DOTP_RRR_0_OPCODE_X0 = 126, - V2INT_H_RRR_0_OPCODE_X0 = 127, - V2INT_H_RRR_0_OPCODE_X1 = 81, - V2INT_L_RRR_0_OPCODE_X0 = 128, - V2INT_L_RRR_0_OPCODE_X1 = 82, - V2MAXSI_IMM8_OPCODE_X0 = 18, - V2MAXSI_IMM8_OPCODE_X1 = 43, - V2MAXS_RRR_0_OPCODE_X0 = 129, - V2MAXS_RRR_0_OPCODE_X1 = 83, - V2MINSI_IMM8_OPCODE_X0 = 19, - V2MINSI_IMM8_OPCODE_X1 = 44, - V2MINS_RRR_0_OPCODE_X0 = 130, - V2MINS_RRR_0_OPCODE_X1 = 84, - V2MNZ_RRR_0_OPCODE_X0 = 131, - V2MNZ_RRR_0_OPCODE_X1 = 85, - V2MULFSC_RRR_0_OPCODE_X0 = 132, - V2MULS_RRR_0_OPCODE_X0 = 133, - V2MULTS_RRR_0_OPCODE_X0 = 134, - V2MZ_RRR_0_OPCODE_X0 = 135, - V2MZ_RRR_0_OPCODE_X1 = 86, - V2PACKH_RRR_0_OPCODE_X0 = 136, - V2PACKH_RRR_0_OPCODE_X1 = 87, - V2PACKL_RRR_0_OPCODE_X0 = 137, - V2PACKL_RRR_0_OPCODE_X1 = 88, - V2PACKUC_RRR_0_OPCODE_X0 = 138, - V2PACKUC_RRR_0_OPCODE_X1 = 89, - V2SADAS_RRR_0_OPCODE_X0 = 139, - V2SADAU_RRR_0_OPCODE_X0 = 140, - V2SADS_RRR_0_OPCODE_X0 = 141, - V2SADU_RRR_0_OPCODE_X0 = 142, - V2SHLI_SHIFT_OPCODE_X0 = 10, - V2SHLI_SHIFT_OPCODE_X1 = 10, - V2SHLSC_RRR_0_OPCODE_X0 = 143, - V2SHLSC_RRR_0_OPCODE_X1 = 90, - V2SHL_RRR_0_OPCODE_X0 = 144, - V2SHL_RRR_0_OPCODE_X1 = 91, - V2SHRSI_SHIFT_OPCODE_X0 = 11, - V2SHRSI_SHIFT_OPCODE_X1 = 11, - V2SHRS_RRR_0_OPCODE_X0 = 145, - V2SHRS_RRR_0_OPCODE_X1 = 92, - V2SHRUI_SHIFT_OPCODE_X0 = 12, - V2SHRUI_SHIFT_OPCODE_X1 = 12, - V2SHRU_RRR_0_OPCODE_X0 = 146, - V2SHRU_RRR_0_OPCODE_X1 = 93, - V2SUBSC_RRR_0_OPCODE_X0 = 147, - V2SUBSC_RRR_0_OPCODE_X1 = 94, - V2SUB_RRR_0_OPCODE_X0 = 148, - V2SUB_RRR_0_OPCODE_X1 = 95, - V4ADDSC_RRR_0_OPCODE_X0 = 149, - V4ADDSC_RRR_0_OPCODE_X1 = 96, - V4ADD_RRR_0_OPCODE_X0 = 150, - V4ADD_RRR_0_OPCODE_X1 = 97, - V4INT_H_RRR_0_OPCODE_X0 = 151, - V4INT_H_RRR_0_OPCODE_X1 = 98, - V4INT_L_RRR_0_OPCODE_X0 = 152, - V4INT_L_RRR_0_OPCODE_X1 = 99, - V4PACKSC_RRR_0_OPCODE_X0 = 153, - V4PACKSC_RRR_0_OPCODE_X1 = 100, - V4SHLSC_RRR_0_OPCODE_X0 = 154, - V4SHLSC_RRR_0_OPCODE_X1 = 101, - V4SHL_RRR_0_OPCODE_X0 = 155, - V4SHL_RRR_0_OPCODE_X1 = 102, - V4SHRS_RRR_0_OPCODE_X0 = 156, - V4SHRS_RRR_0_OPCODE_X1 = 103, - V4SHRU_RRR_0_OPCODE_X0 = 157, - V4SHRU_RRR_0_OPCODE_X1 = 104, - V4SUBSC_RRR_0_OPCODE_X0 = 158, - V4SUBSC_RRR_0_OPCODE_X1 = 105, - V4SUB_RRR_0_OPCODE_X0 = 159, - V4SUB_RRR_0_OPCODE_X1 = 106, - WH64_UNARY_OPCODE_X1 = 38, - XORI_IMM8_OPCODE_X0 = 20, - XORI_IMM8_OPCODE_X1 = 45, - XOR_RRR_0_OPCODE_X0 = 160, - XOR_RRR_0_OPCODE_X1 = 107, - XOR_RRR_5_OPCODE_Y0 = 3, - XOR_RRR_5_OPCODE_Y1 = 3 -}; - - -#endif /* __ASSEMBLER__ */ - -#endif /* __ARCH_OPCODE_H__ */ diff --git a/arch/tile/include/uapi/arch/opcode_tilepro.h b/arch/tile/include/uapi/arch/opcode_tilepro.h deleted file mode 100644 index 0d633688de63..000000000000 --- a/arch/tile/include/uapi/arch/opcode_tilepro.h +++ /dev/null @@ -1,1473 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* TILEPro opcode information. - * - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * - * - * - * - */ - -#ifndef __ARCH_OPCODE_H__ -#define __ARCH_OPCODE_H__ - -#ifndef __ASSEMBLER__ - -typedef unsigned long long tilepro_bundle_bits; - -/* This is the bit that determines if a bundle is in the Y encoding. */ -#define TILEPRO_BUNDLE_Y_ENCODING_MASK ((tilepro_bundle_bits)1 << 63) - -enum -{ - /* Maximum number of instructions in a bundle (2 for X, 3 for Y). */ - TILEPRO_MAX_INSTRUCTIONS_PER_BUNDLE = 3, - - /* How many different pipeline encodings are there? X0, X1, Y0, Y1, Y2. */ - TILEPRO_NUM_PIPELINE_ENCODINGS = 5, - - /* Log base 2 of TILEPRO_BUNDLE_SIZE_IN_BYTES. */ - TILEPRO_LOG2_BUNDLE_SIZE_IN_BYTES = 3, - - /* Instructions take this many bytes. */ - TILEPRO_BUNDLE_SIZE_IN_BYTES = 1 << TILEPRO_LOG2_BUNDLE_SIZE_IN_BYTES, - - /* Log base 2 of TILEPRO_BUNDLE_ALIGNMENT_IN_BYTES. */ - TILEPRO_LOG2_BUNDLE_ALIGNMENT_IN_BYTES = 3, - - /* Bundles should be aligned modulo this number of bytes. */ - TILEPRO_BUNDLE_ALIGNMENT_IN_BYTES = - (1 << TILEPRO_LOG2_BUNDLE_ALIGNMENT_IN_BYTES), - - /* Log base 2 of TILEPRO_SN_INSTRUCTION_SIZE_IN_BYTES. */ - TILEPRO_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES = 1, - - /* Static network instructions take this many bytes. */ - TILEPRO_SN_INSTRUCTION_SIZE_IN_BYTES = - (1 << TILEPRO_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES), - - /* Number of registers (some are magic, such as network I/O). */ - TILEPRO_NUM_REGISTERS = 64, - - /* Number of static network registers. */ - TILEPRO_NUM_SN_REGISTERS = 4 -}; - -/* Make a few "tile_" variables to simplify common code between - architectures. */ - -typedef tilepro_bundle_bits tile_bundle_bits; -#define TILE_BUNDLE_SIZE_IN_BYTES TILEPRO_BUNDLE_SIZE_IN_BYTES -#define TILE_BUNDLE_ALIGNMENT_IN_BYTES TILEPRO_BUNDLE_ALIGNMENT_IN_BYTES -#define TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES \ - TILEPRO_LOG2_BUNDLE_ALIGNMENT_IN_BYTES -#define TILE_BPT_BUNDLE TILEPRO_BPT_BUNDLE - -/* 64-bit pattern for a { bpt ; nop } bundle. */ -#define TILEPRO_BPT_BUNDLE 0x400b3cae70166000ULL - -static __inline unsigned int -get_BrOff_SN(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 0)) & 0x3ff); -} - -static __inline unsigned int -get_BrOff_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0x00007fff) | - (((unsigned int)(n >> 20)) & 0x00018000); -} - -static __inline unsigned int -get_BrType_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 31)) & 0xf); -} - -static __inline unsigned int -get_Dest_Imm8_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 31)) & 0x0000003f) | - (((unsigned int)(n >> 43)) & 0x000000c0); -} - -static __inline unsigned int -get_Dest_SN(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 2)) & 0x3); -} - -static __inline unsigned int -get_Dest_X0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 0)) & 0x3f); -} - -static __inline unsigned int -get_Dest_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 31)) & 0x3f); -} - -static __inline unsigned int -get_Dest_Y0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 0)) & 0x3f); -} - -static __inline unsigned int -get_Dest_Y1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 31)) & 0x3f); -} - -static __inline unsigned int -get_Imm16_X0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0xffff); -} - -static __inline unsigned int -get_Imm16_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0xffff); -} - -static __inline unsigned int -get_Imm8_SN(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 0)) & 0xff); -} - -static __inline unsigned int -get_Imm8_X0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0xff); -} - -static __inline unsigned int -get_Imm8_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0xff); -} - -static __inline unsigned int -get_Imm8_Y0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0xff); -} - -static __inline unsigned int -get_Imm8_Y1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0xff); -} - -static __inline unsigned int -get_ImmOpcodeExtension_X0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 20)) & 0x7f); -} - -static __inline unsigned int -get_ImmOpcodeExtension_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 51)) & 0x7f); -} - -static __inline unsigned int -get_ImmRROpcodeExtension_SN(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 8)) & 0x3); -} - -static __inline unsigned int -get_JOffLong_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0x00007fff) | - (((unsigned int)(n >> 20)) & 0x00018000) | - (((unsigned int)(n >> 14)) & 0x001e0000) | - (((unsigned int)(n >> 16)) & 0x07e00000) | - (((unsigned int)(n >> 31)) & 0x18000000); -} - -static __inline unsigned int -get_JOff_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0x00007fff) | - (((unsigned int)(n >> 20)) & 0x00018000) | - (((unsigned int)(n >> 14)) & 0x001e0000) | - (((unsigned int)(n >> 16)) & 0x07e00000) | - (((unsigned int)(n >> 31)) & 0x08000000); -} - -static __inline unsigned int -get_MF_Imm15_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 37)) & 0x00003fff) | - (((unsigned int)(n >> 44)) & 0x00004000); -} - -static __inline unsigned int -get_MMEnd_X0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 18)) & 0x1f); -} - -static __inline unsigned int -get_MMEnd_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 49)) & 0x1f); -} - -static __inline unsigned int -get_MMStart_X0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 23)) & 0x1f); -} - -static __inline unsigned int -get_MMStart_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 54)) & 0x1f); -} - -static __inline unsigned int -get_MT_Imm15_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 31)) & 0x0000003f) | - (((unsigned int)(n >> 37)) & 0x00003fc0) | - (((unsigned int)(n >> 44)) & 0x00004000); -} - -static __inline unsigned int -get_Mode(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 63)) & 0x1); -} - -static __inline unsigned int -get_NoRegOpcodeExtension_SN(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 0)) & 0xf); -} - -static __inline unsigned int -get_Opcode_SN(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 10)) & 0x3f); -} - -static __inline unsigned int -get_Opcode_X0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 28)) & 0x7); -} - -static __inline unsigned int -get_Opcode_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 59)) & 0xf); -} - -static __inline unsigned int -get_Opcode_Y0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 27)) & 0xf); -} - -static __inline unsigned int -get_Opcode_Y1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 59)) & 0xf); -} - -static __inline unsigned int -get_Opcode_Y2(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 56)) & 0x7); -} - -static __inline unsigned int -get_RROpcodeExtension_SN(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 4)) & 0xf); -} - -static __inline unsigned int -get_RRROpcodeExtension_X0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 18)) & 0x1ff); -} - -static __inline unsigned int -get_RRROpcodeExtension_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 49)) & 0x1ff); -} - -static __inline unsigned int -get_RRROpcodeExtension_Y0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 18)) & 0x3); -} - -static __inline unsigned int -get_RRROpcodeExtension_Y1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 49)) & 0x3); -} - -static __inline unsigned int -get_RouteOpcodeExtension_SN(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 0)) & 0x3ff); -} - -static __inline unsigned int -get_S_X0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 27)) & 0x1); -} - -static __inline unsigned int -get_S_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 58)) & 0x1); -} - -static __inline unsigned int -get_ShAmt_X0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0x1f); -} - -static __inline unsigned int -get_ShAmt_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0x1f); -} - -static __inline unsigned int -get_ShAmt_Y0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0x1f); -} - -static __inline unsigned int -get_ShAmt_Y1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0x1f); -} - -static __inline unsigned int -get_SrcA_X0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 6)) & 0x3f); -} - -static __inline unsigned int -get_SrcA_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 37)) & 0x3f); -} - -static __inline unsigned int -get_SrcA_Y0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 6)) & 0x3f); -} - -static __inline unsigned int -get_SrcA_Y1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 37)) & 0x3f); -} - -static __inline unsigned int -get_SrcA_Y2(tilepro_bundle_bits n) -{ - return (((n >> 26)) & 0x00000001) | - (((unsigned int)(n >> 50)) & 0x0000003e); -} - -static __inline unsigned int -get_SrcBDest_Y2(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 20)) & 0x3f); -} - -static __inline unsigned int -get_SrcB_X0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0x3f); -} - -static __inline unsigned int -get_SrcB_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0x3f); -} - -static __inline unsigned int -get_SrcB_Y0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0x3f); -} - -static __inline unsigned int -get_SrcB_Y1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0x3f); -} - -static __inline unsigned int -get_Src_SN(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 0)) & 0x3); -} - -static __inline unsigned int -get_UnOpcodeExtension_X0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0x1f); -} - -static __inline unsigned int -get_UnOpcodeExtension_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0x1f); -} - -static __inline unsigned int -get_UnOpcodeExtension_Y0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0x1f); -} - -static __inline unsigned int -get_UnOpcodeExtension_Y1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0x1f); -} - -static __inline unsigned int -get_UnShOpcodeExtension_X0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 17)) & 0x3ff); -} - -static __inline unsigned int -get_UnShOpcodeExtension_X1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 48)) & 0x3ff); -} - -static __inline unsigned int -get_UnShOpcodeExtension_Y0(tilepro_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 17)) & 0x7); -} - -static __inline unsigned int -get_UnShOpcodeExtension_Y1(tilepro_bundle_bits n) -{ - return (((unsigned int)(n >> 48)) & 0x7); -} - - -static __inline int -sign_extend(int n, int num_bits) -{ - int shift = (int)(sizeof(int) * 8 - num_bits); - return (n << shift) >> shift; -} - - - -static __inline tilepro_bundle_bits -create_BrOff_SN(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3ff) << 0); -} - -static __inline tilepro_bundle_bits -create_BrOff_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x00007fff)) << 43) | - (((tilepro_bundle_bits)(n & 0x00018000)) << 20); -} - -static __inline tilepro_bundle_bits -create_BrType_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0xf)) << 31); -} - -static __inline tilepro_bundle_bits -create_Dest_Imm8_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x0000003f)) << 31) | - (((tilepro_bundle_bits)(n & 0x000000c0)) << 43); -} - -static __inline tilepro_bundle_bits -create_Dest_SN(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3) << 2); -} - -static __inline tilepro_bundle_bits -create_Dest_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 0); -} - -static __inline tilepro_bundle_bits -create_Dest_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x3f)) << 31); -} - -static __inline tilepro_bundle_bits -create_Dest_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 0); -} - -static __inline tilepro_bundle_bits -create_Dest_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x3f)) << 31); -} - -static __inline tilepro_bundle_bits -create_Imm16_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0xffff) << 12); -} - -static __inline tilepro_bundle_bits -create_Imm16_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0xffff)) << 43); -} - -static __inline tilepro_bundle_bits -create_Imm8_SN(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0xff) << 0); -} - -static __inline tilepro_bundle_bits -create_Imm8_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0xff) << 12); -} - -static __inline tilepro_bundle_bits -create_Imm8_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0xff)) << 43); -} - -static __inline tilepro_bundle_bits -create_Imm8_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0xff) << 12); -} - -static __inline tilepro_bundle_bits -create_Imm8_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0xff)) << 43); -} - -static __inline tilepro_bundle_bits -create_ImmOpcodeExtension_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x7f) << 20); -} - -static __inline tilepro_bundle_bits -create_ImmOpcodeExtension_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x7f)) << 51); -} - -static __inline tilepro_bundle_bits -create_ImmRROpcodeExtension_SN(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3) << 8); -} - -static __inline tilepro_bundle_bits -create_JOffLong_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x00007fff)) << 43) | - (((tilepro_bundle_bits)(n & 0x00018000)) << 20) | - (((tilepro_bundle_bits)(n & 0x001e0000)) << 14) | - (((tilepro_bundle_bits)(n & 0x07e00000)) << 16) | - (((tilepro_bundle_bits)(n & 0x18000000)) << 31); -} - -static __inline tilepro_bundle_bits -create_JOff_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x00007fff)) << 43) | - (((tilepro_bundle_bits)(n & 0x00018000)) << 20) | - (((tilepro_bundle_bits)(n & 0x001e0000)) << 14) | - (((tilepro_bundle_bits)(n & 0x07e00000)) << 16) | - (((tilepro_bundle_bits)(n & 0x08000000)) << 31); -} - -static __inline tilepro_bundle_bits -create_MF_Imm15_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x00003fff)) << 37) | - (((tilepro_bundle_bits)(n & 0x00004000)) << 44); -} - -static __inline tilepro_bundle_bits -create_MMEnd_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x1f) << 18); -} - -static __inline tilepro_bundle_bits -create_MMEnd_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x1f)) << 49); -} - -static __inline tilepro_bundle_bits -create_MMStart_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x1f) << 23); -} - -static __inline tilepro_bundle_bits -create_MMStart_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x1f)) << 54); -} - -static __inline tilepro_bundle_bits -create_MT_Imm15_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x0000003f)) << 31) | - (((tilepro_bundle_bits)(n & 0x00003fc0)) << 37) | - (((tilepro_bundle_bits)(n & 0x00004000)) << 44); -} - -static __inline tilepro_bundle_bits -create_Mode(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x1)) << 63); -} - -static __inline tilepro_bundle_bits -create_NoRegOpcodeExtension_SN(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0xf) << 0); -} - -static __inline tilepro_bundle_bits -create_Opcode_SN(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 10); -} - -static __inline tilepro_bundle_bits -create_Opcode_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x7) << 28); -} - -static __inline tilepro_bundle_bits -create_Opcode_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0xf)) << 59); -} - -static __inline tilepro_bundle_bits -create_Opcode_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0xf) << 27); -} - -static __inline tilepro_bundle_bits -create_Opcode_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0xf)) << 59); -} - -static __inline tilepro_bundle_bits -create_Opcode_Y2(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x7)) << 56); -} - -static __inline tilepro_bundle_bits -create_RROpcodeExtension_SN(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0xf) << 4); -} - -static __inline tilepro_bundle_bits -create_RRROpcodeExtension_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x1ff) << 18); -} - -static __inline tilepro_bundle_bits -create_RRROpcodeExtension_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x1ff)) << 49); -} - -static __inline tilepro_bundle_bits -create_RRROpcodeExtension_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3) << 18); -} - -static __inline tilepro_bundle_bits -create_RRROpcodeExtension_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x3)) << 49); -} - -static __inline tilepro_bundle_bits -create_RouteOpcodeExtension_SN(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3ff) << 0); -} - -static __inline tilepro_bundle_bits -create_S_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x1) << 27); -} - -static __inline tilepro_bundle_bits -create_S_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x1)) << 58); -} - -static __inline tilepro_bundle_bits -create_ShAmt_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x1f) << 12); -} - -static __inline tilepro_bundle_bits -create_ShAmt_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x1f)) << 43); -} - -static __inline tilepro_bundle_bits -create_ShAmt_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x1f) << 12); -} - -static __inline tilepro_bundle_bits -create_ShAmt_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x1f)) << 43); -} - -static __inline tilepro_bundle_bits -create_SrcA_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 6); -} - -static __inline tilepro_bundle_bits -create_SrcA_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x3f)) << 37); -} - -static __inline tilepro_bundle_bits -create_SrcA_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 6); -} - -static __inline tilepro_bundle_bits -create_SrcA_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x3f)) << 37); -} - -static __inline tilepro_bundle_bits -create_SrcA_Y2(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x00000001) << 26) | - (((tilepro_bundle_bits)(n & 0x0000003e)) << 50); -} - -static __inline tilepro_bundle_bits -create_SrcBDest_Y2(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 20); -} - -static __inline tilepro_bundle_bits -create_SrcB_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 12); -} - -static __inline tilepro_bundle_bits -create_SrcB_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x3f)) << 43); -} - -static __inline tilepro_bundle_bits -create_SrcB_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 12); -} - -static __inline tilepro_bundle_bits -create_SrcB_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x3f)) << 43); -} - -static __inline tilepro_bundle_bits -create_Src_SN(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3) << 0); -} - -static __inline tilepro_bundle_bits -create_UnOpcodeExtension_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x1f) << 12); -} - -static __inline tilepro_bundle_bits -create_UnOpcodeExtension_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x1f)) << 43); -} - -static __inline tilepro_bundle_bits -create_UnOpcodeExtension_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x1f) << 12); -} - -static __inline tilepro_bundle_bits -create_UnOpcodeExtension_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x1f)) << 43); -} - -static __inline tilepro_bundle_bits -create_UnShOpcodeExtension_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3ff) << 17); -} - -static __inline tilepro_bundle_bits -create_UnShOpcodeExtension_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x3ff)) << 48); -} - -static __inline tilepro_bundle_bits -create_UnShOpcodeExtension_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x7) << 17); -} - -static __inline tilepro_bundle_bits -create_UnShOpcodeExtension_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tilepro_bundle_bits)(n & 0x7)) << 48); -} - - -enum -{ - ADDBS_U_SPECIAL_0_OPCODE_X0 = 98, - ADDBS_U_SPECIAL_0_OPCODE_X1 = 68, - ADDB_SPECIAL_0_OPCODE_X0 = 1, - ADDB_SPECIAL_0_OPCODE_X1 = 1, - ADDHS_SPECIAL_0_OPCODE_X0 = 99, - ADDHS_SPECIAL_0_OPCODE_X1 = 69, - ADDH_SPECIAL_0_OPCODE_X0 = 2, - ADDH_SPECIAL_0_OPCODE_X1 = 2, - ADDIB_IMM_0_OPCODE_X0 = 1, - ADDIB_IMM_0_OPCODE_X1 = 1, - ADDIH_IMM_0_OPCODE_X0 = 2, - ADDIH_IMM_0_OPCODE_X1 = 2, - ADDI_IMM_0_OPCODE_X0 = 3, - ADDI_IMM_0_OPCODE_X1 = 3, - ADDI_IMM_1_OPCODE_SN = 1, - ADDI_OPCODE_Y0 = 9, - ADDI_OPCODE_Y1 = 7, - ADDLIS_OPCODE_X0 = 1, - ADDLIS_OPCODE_X1 = 2, - ADDLI_OPCODE_X0 = 2, - ADDLI_OPCODE_X1 = 3, - ADDS_SPECIAL_0_OPCODE_X0 = 96, - ADDS_SPECIAL_0_OPCODE_X1 = 66, - ADD_SPECIAL_0_OPCODE_X0 = 3, - ADD_SPECIAL_0_OPCODE_X1 = 3, - ADD_SPECIAL_0_OPCODE_Y0 = 0, - ADD_SPECIAL_0_OPCODE_Y1 = 0, - ADIFFB_U_SPECIAL_0_OPCODE_X0 = 4, - ADIFFH_SPECIAL_0_OPCODE_X0 = 5, - ANDI_IMM_0_OPCODE_X0 = 1, - ANDI_IMM_0_OPCODE_X1 = 4, - ANDI_OPCODE_Y0 = 10, - ANDI_OPCODE_Y1 = 8, - AND_SPECIAL_0_OPCODE_X0 = 6, - AND_SPECIAL_0_OPCODE_X1 = 4, - AND_SPECIAL_2_OPCODE_Y0 = 0, - AND_SPECIAL_2_OPCODE_Y1 = 0, - AULI_OPCODE_X0 = 3, - AULI_OPCODE_X1 = 4, - AVGB_U_SPECIAL_0_OPCODE_X0 = 7, - AVGH_SPECIAL_0_OPCODE_X0 = 8, - BBNST_BRANCH_OPCODE_X1 = 15, - BBNS_BRANCH_OPCODE_X1 = 14, - BBNS_OPCODE_SN = 63, - BBST_BRANCH_OPCODE_X1 = 13, - BBS_BRANCH_OPCODE_X1 = 12, - BBS_OPCODE_SN = 62, - BGEZT_BRANCH_OPCODE_X1 = 7, - BGEZ_BRANCH_OPCODE_X1 = 6, - BGEZ_OPCODE_SN = 61, - BGZT_BRANCH_OPCODE_X1 = 5, - BGZ_BRANCH_OPCODE_X1 = 4, - BGZ_OPCODE_SN = 58, - BITX_UN_0_SHUN_0_OPCODE_X0 = 1, - BITX_UN_0_SHUN_0_OPCODE_Y0 = 1, - BLEZT_BRANCH_OPCODE_X1 = 11, - BLEZ_BRANCH_OPCODE_X1 = 10, - BLEZ_OPCODE_SN = 59, - BLZT_BRANCH_OPCODE_X1 = 9, - BLZ_BRANCH_OPCODE_X1 = 8, - BLZ_OPCODE_SN = 60, - BNZT_BRANCH_OPCODE_X1 = 3, - BNZ_BRANCH_OPCODE_X1 = 2, - BNZ_OPCODE_SN = 57, - BPT_NOREG_RR_IMM_0_OPCODE_SN = 1, - BRANCH_OPCODE_X1 = 5, - BYTEX_UN_0_SHUN_0_OPCODE_X0 = 2, - BYTEX_UN_0_SHUN_0_OPCODE_Y0 = 2, - BZT_BRANCH_OPCODE_X1 = 1, - BZ_BRANCH_OPCODE_X1 = 0, - BZ_OPCODE_SN = 56, - CLZ_UN_0_SHUN_0_OPCODE_X0 = 3, - CLZ_UN_0_SHUN_0_OPCODE_Y0 = 3, - CRC32_32_SPECIAL_0_OPCODE_X0 = 9, - CRC32_8_SPECIAL_0_OPCODE_X0 = 10, - CTZ_UN_0_SHUN_0_OPCODE_X0 = 4, - CTZ_UN_0_SHUN_0_OPCODE_Y0 = 4, - DRAIN_UN_0_SHUN_0_OPCODE_X1 = 1, - DTLBPR_UN_0_SHUN_0_OPCODE_X1 = 2, - DWORD_ALIGN_SPECIAL_0_OPCODE_X0 = 95, - FINV_UN_0_SHUN_0_OPCODE_X1 = 3, - FLUSH_UN_0_SHUN_0_OPCODE_X1 = 4, - FNOP_NOREG_RR_IMM_0_OPCODE_SN = 3, - FNOP_UN_0_SHUN_0_OPCODE_X0 = 5, - FNOP_UN_0_SHUN_0_OPCODE_X1 = 5, - FNOP_UN_0_SHUN_0_OPCODE_Y0 = 5, - FNOP_UN_0_SHUN_0_OPCODE_Y1 = 1, - HALT_NOREG_RR_IMM_0_OPCODE_SN = 0, - ICOH_UN_0_SHUN_0_OPCODE_X1 = 6, - ILL_UN_0_SHUN_0_OPCODE_X1 = 7, - ILL_UN_0_SHUN_0_OPCODE_Y1 = 2, - IMM_0_OPCODE_SN = 0, - IMM_0_OPCODE_X0 = 4, - IMM_0_OPCODE_X1 = 6, - IMM_1_OPCODE_SN = 1, - IMM_OPCODE_0_X0 = 5, - INTHB_SPECIAL_0_OPCODE_X0 = 11, - INTHB_SPECIAL_0_OPCODE_X1 = 5, - INTHH_SPECIAL_0_OPCODE_X0 = 12, - INTHH_SPECIAL_0_OPCODE_X1 = 6, - INTLB_SPECIAL_0_OPCODE_X0 = 13, - INTLB_SPECIAL_0_OPCODE_X1 = 7, - INTLH_SPECIAL_0_OPCODE_X0 = 14, - INTLH_SPECIAL_0_OPCODE_X1 = 8, - INV_UN_0_SHUN_0_OPCODE_X1 = 8, - IRET_UN_0_SHUN_0_OPCODE_X1 = 9, - JALB_OPCODE_X1 = 13, - JALF_OPCODE_X1 = 12, - JALRP_SPECIAL_0_OPCODE_X1 = 9, - JALRR_IMM_1_OPCODE_SN = 3, - JALR_RR_IMM_0_OPCODE_SN = 5, - JALR_SPECIAL_0_OPCODE_X1 = 10, - JB_OPCODE_X1 = 11, - JF_OPCODE_X1 = 10, - JRP_SPECIAL_0_OPCODE_X1 = 11, - JRR_IMM_1_OPCODE_SN = 2, - JR_RR_IMM_0_OPCODE_SN = 4, - JR_SPECIAL_0_OPCODE_X1 = 12, - LBADD_IMM_0_OPCODE_X1 = 22, - LBADD_U_IMM_0_OPCODE_X1 = 23, - LB_OPCODE_Y2 = 0, - LB_UN_0_SHUN_0_OPCODE_X1 = 10, - LB_U_OPCODE_Y2 = 1, - LB_U_UN_0_SHUN_0_OPCODE_X1 = 11, - LHADD_IMM_0_OPCODE_X1 = 24, - LHADD_U_IMM_0_OPCODE_X1 = 25, - LH_OPCODE_Y2 = 2, - LH_UN_0_SHUN_0_OPCODE_X1 = 12, - LH_U_OPCODE_Y2 = 3, - LH_U_UN_0_SHUN_0_OPCODE_X1 = 13, - LNK_SPECIAL_0_OPCODE_X1 = 13, - LWADD_IMM_0_OPCODE_X1 = 26, - LWADD_NA_IMM_0_OPCODE_X1 = 27, - LW_NA_UN_0_SHUN_0_OPCODE_X1 = 24, - LW_OPCODE_Y2 = 4, - LW_UN_0_SHUN_0_OPCODE_X1 = 14, - MAXB_U_SPECIAL_0_OPCODE_X0 = 15, - MAXB_U_SPECIAL_0_OPCODE_X1 = 14, - MAXH_SPECIAL_0_OPCODE_X0 = 16, - MAXH_SPECIAL_0_OPCODE_X1 = 15, - MAXIB_U_IMM_0_OPCODE_X0 = 4, - MAXIB_U_IMM_0_OPCODE_X1 = 5, - MAXIH_IMM_0_OPCODE_X0 = 5, - MAXIH_IMM_0_OPCODE_X1 = 6, - MFSPR_IMM_0_OPCODE_X1 = 7, - MF_UN_0_SHUN_0_OPCODE_X1 = 15, - MINB_U_SPECIAL_0_OPCODE_X0 = 17, - MINB_U_SPECIAL_0_OPCODE_X1 = 16, - MINH_SPECIAL_0_OPCODE_X0 = 18, - MINH_SPECIAL_0_OPCODE_X1 = 17, - MINIB_U_IMM_0_OPCODE_X0 = 6, - MINIB_U_IMM_0_OPCODE_X1 = 8, - MINIH_IMM_0_OPCODE_X0 = 7, - MINIH_IMM_0_OPCODE_X1 = 9, - MM_OPCODE_X0 = 6, - MM_OPCODE_X1 = 7, - MNZB_SPECIAL_0_OPCODE_X0 = 19, - MNZB_SPECIAL_0_OPCODE_X1 = 18, - MNZH_SPECIAL_0_OPCODE_X0 = 20, - MNZH_SPECIAL_0_OPCODE_X1 = 19, - MNZ_SPECIAL_0_OPCODE_X0 = 21, - MNZ_SPECIAL_0_OPCODE_X1 = 20, - MNZ_SPECIAL_1_OPCODE_Y0 = 0, - MNZ_SPECIAL_1_OPCODE_Y1 = 1, - MOVEI_IMM_1_OPCODE_SN = 0, - MOVE_RR_IMM_0_OPCODE_SN = 8, - MTSPR_IMM_0_OPCODE_X1 = 10, - MULHHA_SS_SPECIAL_0_OPCODE_X0 = 22, - MULHHA_SS_SPECIAL_7_OPCODE_Y0 = 0, - MULHHA_SU_SPECIAL_0_OPCODE_X0 = 23, - MULHHA_UU_SPECIAL_0_OPCODE_X0 = 24, - MULHHA_UU_SPECIAL_7_OPCODE_Y0 = 1, - MULHHSA_UU_SPECIAL_0_OPCODE_X0 = 25, - MULHH_SS_SPECIAL_0_OPCODE_X0 = 26, - MULHH_SS_SPECIAL_6_OPCODE_Y0 = 0, - MULHH_SU_SPECIAL_0_OPCODE_X0 = 27, - MULHH_UU_SPECIAL_0_OPCODE_X0 = 28, - MULHH_UU_SPECIAL_6_OPCODE_Y0 = 1, - MULHLA_SS_SPECIAL_0_OPCODE_X0 = 29, - MULHLA_SU_SPECIAL_0_OPCODE_X0 = 30, - MULHLA_US_SPECIAL_0_OPCODE_X0 = 31, - MULHLA_UU_SPECIAL_0_OPCODE_X0 = 32, - MULHLSA_UU_SPECIAL_0_OPCODE_X0 = 33, - MULHLSA_UU_SPECIAL_5_OPCODE_Y0 = 0, - MULHL_SS_SPECIAL_0_OPCODE_X0 = 34, - MULHL_SU_SPECIAL_0_OPCODE_X0 = 35, - MULHL_US_SPECIAL_0_OPCODE_X0 = 36, - MULHL_UU_SPECIAL_0_OPCODE_X0 = 37, - MULLLA_SS_SPECIAL_0_OPCODE_X0 = 38, - MULLLA_SS_SPECIAL_7_OPCODE_Y0 = 2, - MULLLA_SU_SPECIAL_0_OPCODE_X0 = 39, - MULLLA_UU_SPECIAL_0_OPCODE_X0 = 40, - MULLLA_UU_SPECIAL_7_OPCODE_Y0 = 3, - MULLLSA_UU_SPECIAL_0_OPCODE_X0 = 41, - MULLL_SS_SPECIAL_0_OPCODE_X0 = 42, - MULLL_SS_SPECIAL_6_OPCODE_Y0 = 2, - MULLL_SU_SPECIAL_0_OPCODE_X0 = 43, - MULLL_UU_SPECIAL_0_OPCODE_X0 = 44, - MULLL_UU_SPECIAL_6_OPCODE_Y0 = 3, - MVNZ_SPECIAL_0_OPCODE_X0 = 45, - MVNZ_SPECIAL_1_OPCODE_Y0 = 1, - MVZ_SPECIAL_0_OPCODE_X0 = 46, - MVZ_SPECIAL_1_OPCODE_Y0 = 2, - MZB_SPECIAL_0_OPCODE_X0 = 47, - MZB_SPECIAL_0_OPCODE_X1 = 21, - MZH_SPECIAL_0_OPCODE_X0 = 48, - MZH_SPECIAL_0_OPCODE_X1 = 22, - MZ_SPECIAL_0_OPCODE_X0 = 49, - MZ_SPECIAL_0_OPCODE_X1 = 23, - MZ_SPECIAL_1_OPCODE_Y0 = 3, - MZ_SPECIAL_1_OPCODE_Y1 = 2, - NAP_UN_0_SHUN_0_OPCODE_X1 = 16, - NOP_NOREG_RR_IMM_0_OPCODE_SN = 2, - NOP_UN_0_SHUN_0_OPCODE_X0 = 6, - NOP_UN_0_SHUN_0_OPCODE_X1 = 17, - NOP_UN_0_SHUN_0_OPCODE_Y0 = 6, - NOP_UN_0_SHUN_0_OPCODE_Y1 = 3, - NOREG_RR_IMM_0_OPCODE_SN = 0, - NOR_SPECIAL_0_OPCODE_X0 = 50, - NOR_SPECIAL_0_OPCODE_X1 = 24, - NOR_SPECIAL_2_OPCODE_Y0 = 1, - NOR_SPECIAL_2_OPCODE_Y1 = 1, - ORI_IMM_0_OPCODE_X0 = 8, - ORI_IMM_0_OPCODE_X1 = 11, - ORI_OPCODE_Y0 = 11, - ORI_OPCODE_Y1 = 9, - OR_SPECIAL_0_OPCODE_X0 = 51, - OR_SPECIAL_0_OPCODE_X1 = 25, - OR_SPECIAL_2_OPCODE_Y0 = 2, - OR_SPECIAL_2_OPCODE_Y1 = 2, - PACKBS_U_SPECIAL_0_OPCODE_X0 = 103, - PACKBS_U_SPECIAL_0_OPCODE_X1 = 73, - PACKHB_SPECIAL_0_OPCODE_X0 = 52, - PACKHB_SPECIAL_0_OPCODE_X1 = 26, - PACKHS_SPECIAL_0_OPCODE_X0 = 102, - PACKHS_SPECIAL_0_OPCODE_X1 = 72, - PACKLB_SPECIAL_0_OPCODE_X0 = 53, - PACKLB_SPECIAL_0_OPCODE_X1 = 27, - PCNT_UN_0_SHUN_0_OPCODE_X0 = 7, - PCNT_UN_0_SHUN_0_OPCODE_Y0 = 7, - RLI_SHUN_0_OPCODE_X0 = 1, - RLI_SHUN_0_OPCODE_X1 = 1, - RLI_SHUN_0_OPCODE_Y0 = 1, - RLI_SHUN_0_OPCODE_Y1 = 1, - RL_SPECIAL_0_OPCODE_X0 = 54, - RL_SPECIAL_0_OPCODE_X1 = 28, - RL_SPECIAL_3_OPCODE_Y0 = 0, - RL_SPECIAL_3_OPCODE_Y1 = 0, - RR_IMM_0_OPCODE_SN = 0, - S1A_SPECIAL_0_OPCODE_X0 = 55, - S1A_SPECIAL_0_OPCODE_X1 = 29, - S1A_SPECIAL_0_OPCODE_Y0 = 1, - S1A_SPECIAL_0_OPCODE_Y1 = 1, - S2A_SPECIAL_0_OPCODE_X0 = 56, - S2A_SPECIAL_0_OPCODE_X1 = 30, - S2A_SPECIAL_0_OPCODE_Y0 = 2, - S2A_SPECIAL_0_OPCODE_Y1 = 2, - S3A_SPECIAL_0_OPCODE_X0 = 57, - S3A_SPECIAL_0_OPCODE_X1 = 31, - S3A_SPECIAL_5_OPCODE_Y0 = 1, - S3A_SPECIAL_5_OPCODE_Y1 = 1, - SADAB_U_SPECIAL_0_OPCODE_X0 = 58, - SADAH_SPECIAL_0_OPCODE_X0 = 59, - SADAH_U_SPECIAL_0_OPCODE_X0 = 60, - SADB_U_SPECIAL_0_OPCODE_X0 = 61, - SADH_SPECIAL_0_OPCODE_X0 = 62, - SADH_U_SPECIAL_0_OPCODE_X0 = 63, - SBADD_IMM_0_OPCODE_X1 = 28, - SB_OPCODE_Y2 = 5, - SB_SPECIAL_0_OPCODE_X1 = 32, - SEQB_SPECIAL_0_OPCODE_X0 = 64, - SEQB_SPECIAL_0_OPCODE_X1 = 33, - SEQH_SPECIAL_0_OPCODE_X0 = 65, - SEQH_SPECIAL_0_OPCODE_X1 = 34, - SEQIB_IMM_0_OPCODE_X0 = 9, - SEQIB_IMM_0_OPCODE_X1 = 12, - SEQIH_IMM_0_OPCODE_X0 = 10, - SEQIH_IMM_0_OPCODE_X1 = 13, - SEQI_IMM_0_OPCODE_X0 = 11, - SEQI_IMM_0_OPCODE_X1 = 14, - SEQI_OPCODE_Y0 = 12, - SEQI_OPCODE_Y1 = 10, - SEQ_SPECIAL_0_OPCODE_X0 = 66, - SEQ_SPECIAL_0_OPCODE_X1 = 35, - SEQ_SPECIAL_5_OPCODE_Y0 = 2, - SEQ_SPECIAL_5_OPCODE_Y1 = 2, - SHADD_IMM_0_OPCODE_X1 = 29, - SHL8II_IMM_0_OPCODE_SN = 3, - SHLB_SPECIAL_0_OPCODE_X0 = 67, - SHLB_SPECIAL_0_OPCODE_X1 = 36, - SHLH_SPECIAL_0_OPCODE_X0 = 68, - SHLH_SPECIAL_0_OPCODE_X1 = 37, - SHLIB_SHUN_0_OPCODE_X0 = 2, - SHLIB_SHUN_0_OPCODE_X1 = 2, - SHLIH_SHUN_0_OPCODE_X0 = 3, - SHLIH_SHUN_0_OPCODE_X1 = 3, - SHLI_SHUN_0_OPCODE_X0 = 4, - SHLI_SHUN_0_OPCODE_X1 = 4, - SHLI_SHUN_0_OPCODE_Y0 = 2, - SHLI_SHUN_0_OPCODE_Y1 = 2, - SHL_SPECIAL_0_OPCODE_X0 = 69, - SHL_SPECIAL_0_OPCODE_X1 = 38, - SHL_SPECIAL_3_OPCODE_Y0 = 1, - SHL_SPECIAL_3_OPCODE_Y1 = 1, - SHR1_RR_IMM_0_OPCODE_SN = 9, - SHRB_SPECIAL_0_OPCODE_X0 = 70, - SHRB_SPECIAL_0_OPCODE_X1 = 39, - SHRH_SPECIAL_0_OPCODE_X0 = 71, - SHRH_SPECIAL_0_OPCODE_X1 = 40, - SHRIB_SHUN_0_OPCODE_X0 = 5, - SHRIB_SHUN_0_OPCODE_X1 = 5, - SHRIH_SHUN_0_OPCODE_X0 = 6, - SHRIH_SHUN_0_OPCODE_X1 = 6, - SHRI_SHUN_0_OPCODE_X0 = 7, - SHRI_SHUN_0_OPCODE_X1 = 7, - SHRI_SHUN_0_OPCODE_Y0 = 3, - SHRI_SHUN_0_OPCODE_Y1 = 3, - SHR_SPECIAL_0_OPCODE_X0 = 72, - SHR_SPECIAL_0_OPCODE_X1 = 41, - SHR_SPECIAL_3_OPCODE_Y0 = 2, - SHR_SPECIAL_3_OPCODE_Y1 = 2, - SHUN_0_OPCODE_X0 = 7, - SHUN_0_OPCODE_X1 = 8, - SHUN_0_OPCODE_Y0 = 13, - SHUN_0_OPCODE_Y1 = 11, - SH_OPCODE_Y2 = 6, - SH_SPECIAL_0_OPCODE_X1 = 42, - SLTB_SPECIAL_0_OPCODE_X0 = 73, - SLTB_SPECIAL_0_OPCODE_X1 = 43, - SLTB_U_SPECIAL_0_OPCODE_X0 = 74, - SLTB_U_SPECIAL_0_OPCODE_X1 = 44, - SLTEB_SPECIAL_0_OPCODE_X0 = 75, - SLTEB_SPECIAL_0_OPCODE_X1 = 45, - SLTEB_U_SPECIAL_0_OPCODE_X0 = 76, - SLTEB_U_SPECIAL_0_OPCODE_X1 = 46, - SLTEH_SPECIAL_0_OPCODE_X0 = 77, - SLTEH_SPECIAL_0_OPCODE_X1 = 47, - SLTEH_U_SPECIAL_0_OPCODE_X0 = 78, - SLTEH_U_SPECIAL_0_OPCODE_X1 = 48, - SLTE_SPECIAL_0_OPCODE_X0 = 79, - SLTE_SPECIAL_0_OPCODE_X1 = 49, - SLTE_SPECIAL_4_OPCODE_Y0 = 0, - SLTE_SPECIAL_4_OPCODE_Y1 = 0, - SLTE_U_SPECIAL_0_OPCODE_X0 = 80, - SLTE_U_SPECIAL_0_OPCODE_X1 = 50, - SLTE_U_SPECIAL_4_OPCODE_Y0 = 1, - SLTE_U_SPECIAL_4_OPCODE_Y1 = 1, - SLTH_SPECIAL_0_OPCODE_X0 = 81, - SLTH_SPECIAL_0_OPCODE_X1 = 51, - SLTH_U_SPECIAL_0_OPCODE_X0 = 82, - SLTH_U_SPECIAL_0_OPCODE_X1 = 52, - SLTIB_IMM_0_OPCODE_X0 = 12, - SLTIB_IMM_0_OPCODE_X1 = 15, - SLTIB_U_IMM_0_OPCODE_X0 = 13, - SLTIB_U_IMM_0_OPCODE_X1 = 16, - SLTIH_IMM_0_OPCODE_X0 = 14, - SLTIH_IMM_0_OPCODE_X1 = 17, - SLTIH_U_IMM_0_OPCODE_X0 = 15, - SLTIH_U_IMM_0_OPCODE_X1 = 18, - SLTI_IMM_0_OPCODE_X0 = 16, - SLTI_IMM_0_OPCODE_X1 = 19, - SLTI_OPCODE_Y0 = 14, - SLTI_OPCODE_Y1 = 12, - SLTI_U_IMM_0_OPCODE_X0 = 17, - SLTI_U_IMM_0_OPCODE_X1 = 20, - SLTI_U_OPCODE_Y0 = 15, - SLTI_U_OPCODE_Y1 = 13, - SLT_SPECIAL_0_OPCODE_X0 = 83, - SLT_SPECIAL_0_OPCODE_X1 = 53, - SLT_SPECIAL_4_OPCODE_Y0 = 2, - SLT_SPECIAL_4_OPCODE_Y1 = 2, - SLT_U_SPECIAL_0_OPCODE_X0 = 84, - SLT_U_SPECIAL_0_OPCODE_X1 = 54, - SLT_U_SPECIAL_4_OPCODE_Y0 = 3, - SLT_U_SPECIAL_4_OPCODE_Y1 = 3, - SNEB_SPECIAL_0_OPCODE_X0 = 85, - SNEB_SPECIAL_0_OPCODE_X1 = 55, - SNEH_SPECIAL_0_OPCODE_X0 = 86, - SNEH_SPECIAL_0_OPCODE_X1 = 56, - SNE_SPECIAL_0_OPCODE_X0 = 87, - SNE_SPECIAL_0_OPCODE_X1 = 57, - SNE_SPECIAL_5_OPCODE_Y0 = 3, - SNE_SPECIAL_5_OPCODE_Y1 = 3, - SPECIAL_0_OPCODE_X0 = 0, - SPECIAL_0_OPCODE_X1 = 1, - SPECIAL_0_OPCODE_Y0 = 1, - SPECIAL_0_OPCODE_Y1 = 1, - SPECIAL_1_OPCODE_Y0 = 2, - SPECIAL_1_OPCODE_Y1 = 2, - SPECIAL_2_OPCODE_Y0 = 3, - SPECIAL_2_OPCODE_Y1 = 3, - SPECIAL_3_OPCODE_Y0 = 4, - SPECIAL_3_OPCODE_Y1 = 4, - SPECIAL_4_OPCODE_Y0 = 5, - SPECIAL_4_OPCODE_Y1 = 5, - SPECIAL_5_OPCODE_Y0 = 6, - SPECIAL_5_OPCODE_Y1 = 6, - SPECIAL_6_OPCODE_Y0 = 7, - SPECIAL_7_OPCODE_Y0 = 8, - SRAB_SPECIAL_0_OPCODE_X0 = 88, - SRAB_SPECIAL_0_OPCODE_X1 = 58, - SRAH_SPECIAL_0_OPCODE_X0 = 89, - SRAH_SPECIAL_0_OPCODE_X1 = 59, - SRAIB_SHUN_0_OPCODE_X0 = 8, - SRAIB_SHUN_0_OPCODE_X1 = 8, - SRAIH_SHUN_0_OPCODE_X0 = 9, - SRAIH_SHUN_0_OPCODE_X1 = 9, - SRAI_SHUN_0_OPCODE_X0 = 10, - SRAI_SHUN_0_OPCODE_X1 = 10, - SRAI_SHUN_0_OPCODE_Y0 = 4, - SRAI_SHUN_0_OPCODE_Y1 = 4, - SRA_SPECIAL_0_OPCODE_X0 = 90, - SRA_SPECIAL_0_OPCODE_X1 = 60, - SRA_SPECIAL_3_OPCODE_Y0 = 3, - SRA_SPECIAL_3_OPCODE_Y1 = 3, - SUBBS_U_SPECIAL_0_OPCODE_X0 = 100, - SUBBS_U_SPECIAL_0_OPCODE_X1 = 70, - SUBB_SPECIAL_0_OPCODE_X0 = 91, - SUBB_SPECIAL_0_OPCODE_X1 = 61, - SUBHS_SPECIAL_0_OPCODE_X0 = 101, - SUBHS_SPECIAL_0_OPCODE_X1 = 71, - SUBH_SPECIAL_0_OPCODE_X0 = 92, - SUBH_SPECIAL_0_OPCODE_X1 = 62, - SUBS_SPECIAL_0_OPCODE_X0 = 97, - SUBS_SPECIAL_0_OPCODE_X1 = 67, - SUB_SPECIAL_0_OPCODE_X0 = 93, - SUB_SPECIAL_0_OPCODE_X1 = 63, - SUB_SPECIAL_0_OPCODE_Y0 = 3, - SUB_SPECIAL_0_OPCODE_Y1 = 3, - SWADD_IMM_0_OPCODE_X1 = 30, - SWINT0_UN_0_SHUN_0_OPCODE_X1 = 18, - SWINT1_UN_0_SHUN_0_OPCODE_X1 = 19, - SWINT2_UN_0_SHUN_0_OPCODE_X1 = 20, - SWINT3_UN_0_SHUN_0_OPCODE_X1 = 21, - SW_OPCODE_Y2 = 7, - SW_SPECIAL_0_OPCODE_X1 = 64, - TBLIDXB0_UN_0_SHUN_0_OPCODE_X0 = 8, - TBLIDXB0_UN_0_SHUN_0_OPCODE_Y0 = 8, - TBLIDXB1_UN_0_SHUN_0_OPCODE_X0 = 9, - TBLIDXB1_UN_0_SHUN_0_OPCODE_Y0 = 9, - TBLIDXB2_UN_0_SHUN_0_OPCODE_X0 = 10, - TBLIDXB2_UN_0_SHUN_0_OPCODE_Y0 = 10, - TBLIDXB3_UN_0_SHUN_0_OPCODE_X0 = 11, - TBLIDXB3_UN_0_SHUN_0_OPCODE_Y0 = 11, - TNS_UN_0_SHUN_0_OPCODE_X1 = 22, - UN_0_SHUN_0_OPCODE_X0 = 11, - UN_0_SHUN_0_OPCODE_X1 = 11, - UN_0_SHUN_0_OPCODE_Y0 = 5, - UN_0_SHUN_0_OPCODE_Y1 = 5, - WH64_UN_0_SHUN_0_OPCODE_X1 = 23, - XORI_IMM_0_OPCODE_X0 = 2, - XORI_IMM_0_OPCODE_X1 = 21, - XOR_SPECIAL_0_OPCODE_X0 = 94, - XOR_SPECIAL_0_OPCODE_X1 = 65, - XOR_SPECIAL_2_OPCODE_Y0 = 3, - XOR_SPECIAL_2_OPCODE_Y1 = 3 -}; - - -#endif /* __ASSEMBLER__ */ - -#endif /* __ARCH_OPCODE_H__ */ diff --git a/arch/tile/include/uapi/arch/sim.h b/arch/tile/include/uapi/arch/sim.h deleted file mode 100644 index c4183dcd2ea7..000000000000 --- a/arch/tile/include/uapi/arch/sim.h +++ /dev/null @@ -1,644 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/** - * @file - * - * Provides an API for controlling the simulator at runtime. - */ - -/** - * @addtogroup arch_sim - * @{ - * - * An API for controlling the simulator at runtime. - * - * The simulator's behavior can be modified while it is running. - * For example, human-readable trace output can be enabled and disabled - * around code of interest. - * - * There are two ways to modify simulator behavior: - * programmatically, by calling various sim_* functions, and - * interactively, by entering commands like "sim set functional true" - * at the tile-monitor prompt. Typing "sim help" at that prompt provides - * a list of interactive commands. - * - * All interactive commands can also be executed programmatically by - * passing a string to the sim_command function. - */ - -#ifndef __ARCH_SIM_H__ -#define __ARCH_SIM_H__ - -#include <arch/sim_def.h> -#include <arch/abi.h> - -#ifndef __ASSEMBLER__ - -#include <arch/spr_def.h> - - -/** - * Return true if the current program is running under a simulator, - * rather than on real hardware. If running on hardware, other "sim_xxx()" - * calls have no useful effect. - */ -static inline int -sim_is_simulator(void) -{ - return __insn_mfspr(SPR_SIM_CONTROL) != 0; -} - - -/** - * Checkpoint the simulator state to a checkpoint file. - * - * The checkpoint file name is either the default or the name specified - * on the command line with "--checkpoint-file". - */ -static __inline void -sim_checkpoint(void) -{ - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_CHECKPOINT); -} - - -/** - * Report whether or not various kinds of simulator tracing are enabled. - * - * @return The bitwise OR of these values: - * - * SIM_TRACE_CYCLES (--trace-cycles), - * SIM_TRACE_ROUTER (--trace-router), - * SIM_TRACE_REGISTER_WRITES (--trace-register-writes), - * SIM_TRACE_DISASM (--trace-disasm), - * SIM_TRACE_STALL_INFO (--trace-stall-info) - * SIM_TRACE_MEMORY_CONTROLLER (--trace-memory-controller) - * SIM_TRACE_L2_CACHE (--trace-l2) - * SIM_TRACE_LINES (--trace-lines) - */ -static __inline unsigned int -sim_get_tracing(void) -{ - return __insn_mfspr(SPR_SIM_CONTROL) & SIM_TRACE_FLAG_MASK; -} - - -/** - * Turn on or off different kinds of simulator tracing. - * - * @param mask Either one of these special values: - * - * SIM_TRACE_NONE (turns off tracing), - * SIM_TRACE_ALL (turns on all possible tracing). - * - * or the bitwise OR of these values: - * - * SIM_TRACE_CYCLES (--trace-cycles), - * SIM_TRACE_ROUTER (--trace-router), - * SIM_TRACE_REGISTER_WRITES (--trace-register-writes), - * SIM_TRACE_DISASM (--trace-disasm), - * SIM_TRACE_STALL_INFO (--trace-stall-info) - * SIM_TRACE_MEMORY_CONTROLLER (--trace-memory-controller) - * SIM_TRACE_L2_CACHE (--trace-l2) - * SIM_TRACE_LINES (--trace-lines) - */ -static __inline void -sim_set_tracing(unsigned int mask) -{ - __insn_mtspr(SPR_SIM_CONTROL, SIM_TRACE_SPR_ARG(mask)); -} - - -/** - * Request dumping of different kinds of simulator state. - * - * @param mask Either this special value: - * - * SIM_DUMP_ALL (dump all known state) - * - * or the bitwise OR of these values: - * - * SIM_DUMP_REGS (the register file), - * SIM_DUMP_SPRS (the SPRs), - * SIM_DUMP_ITLB (the iTLB), - * SIM_DUMP_DTLB (the dTLB), - * SIM_DUMP_L1I (the L1 I-cache), - * SIM_DUMP_L1D (the L1 D-cache), - * SIM_DUMP_L2 (the L2 cache), - * SIM_DUMP_SNREGS (the switch register file), - * SIM_DUMP_SNITLB (the switch iTLB), - * SIM_DUMP_SNL1I (the switch L1 I-cache), - * SIM_DUMP_BACKTRACE (the current backtrace) - */ -static __inline void -sim_dump(unsigned int mask) -{ - __insn_mtspr(SPR_SIM_CONTROL, SIM_DUMP_SPR_ARG(mask)); -} - - -/** - * Print a string to the simulator stdout. - * - * @param str The string to be written. - */ -static __inline void -sim_print(const char* str) -{ - for ( ; *str != '\0'; str++) - { - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PUTC | - (*str << _SIM_CONTROL_OPERATOR_BITS)); - } - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PUTC | - (SIM_PUTC_FLUSH_BINARY << _SIM_CONTROL_OPERATOR_BITS)); -} - - -/** - * Print a string to the simulator stdout. - * - * @param str The string to be written (a newline is automatically added). - */ -static __inline void -sim_print_string(const char* str) -{ - for ( ; *str != '\0'; str++) - { - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PUTC | - (*str << _SIM_CONTROL_OPERATOR_BITS)); - } - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PUTC | - (SIM_PUTC_FLUSH_STRING << _SIM_CONTROL_OPERATOR_BITS)); -} - - -/** - * Execute a simulator command string. - * - * Type 'sim help' at the tile-monitor prompt to learn what commands - * are available. Note the use of the tile-monitor "sim" command to - * pass commands to the simulator. - * - * The argument to sim_command() does not include the leading "sim" - * prefix used at the tile-monitor prompt; for example, you might call - * sim_command("trace disasm"). - */ -static __inline void -sim_command(const char* str) -{ - int c; - do - { - c = *str++; - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_COMMAND | - (c << _SIM_CONTROL_OPERATOR_BITS)); - } - while (c); -} - - - -#ifndef __DOXYGEN__ - -/** - * The underlying implementation of "_sim_syscall()". - * - * We use extra "and" instructions to ensure that all the values - * we are passing to the simulator are actually valid in the registers - * (i.e. returned from memory) prior to the SIM_CONTROL spr. - */ -static __inline long _sim_syscall0(int val) -{ - long result; - __asm__ __volatile__ ("mtspr SIM_CONTROL, r0" - : "=R00" (result) : "R00" (val)); - return result; -} - -static __inline long _sim_syscall1(int val, long arg1) -{ - long result; - __asm__ __volatile__ ("{ and zero, r1, r1; mtspr SIM_CONTROL, r0 }" - : "=R00" (result) : "R00" (val), "R01" (arg1)); - return result; -} - -static __inline long _sim_syscall2(int val, long arg1, long arg2) -{ - long result; - __asm__ __volatile__ ("{ and zero, r1, r2; mtspr SIM_CONTROL, r0 }" - : "=R00" (result) - : "R00" (val), "R01" (arg1), "R02" (arg2)); - return result; -} - -/* Note that _sim_syscall3() and higher are technically at risk of - receiving an interrupt right before the mtspr bundle, in which case - the register values for arguments 3 and up may still be in flight - to the core from a stack frame reload. */ - -static __inline long _sim_syscall3(int val, long arg1, long arg2, long arg3) -{ - long result; - __asm__ __volatile__ ("{ and zero, r3, r3 };" - "{ and zero, r1, r2; mtspr SIM_CONTROL, r0 }" - : "=R00" (result) - : "R00" (val), "R01" (arg1), "R02" (arg2), - "R03" (arg3)); - return result; -} - -static __inline long _sim_syscall4(int val, long arg1, long arg2, long arg3, - long arg4) -{ - long result; - __asm__ __volatile__ ("{ and zero, r3, r4 };" - "{ and zero, r1, r2; mtspr SIM_CONTROL, r0 }" - : "=R00" (result) - : "R00" (val), "R01" (arg1), "R02" (arg2), - "R03" (arg3), "R04" (arg4)); - return result; -} - -static __inline long _sim_syscall5(int val, long arg1, long arg2, long arg3, - long arg4, long arg5) -{ - long result; - __asm__ __volatile__ ("{ and zero, r3, r4; and zero, r5, r5 };" - "{ and zero, r1, r2; mtspr SIM_CONTROL, r0 }" - : "=R00" (result) - : "R00" (val), "R01" (arg1), "R02" (arg2), - "R03" (arg3), "R04" (arg4), "R05" (arg5)); - return result; -} - -/** - * Make a special syscall to the simulator itself, if running under - * simulation. This is used as the implementation of other functions - * and should not be used outside this file. - * - * @param syscall_num The simulator syscall number. - * @param nr The number of additional arguments provided. - * - * @return Varies by syscall. - */ -#define _sim_syscall(syscall_num, nr, args...) \ - _sim_syscall##nr( \ - ((syscall_num) << _SIM_CONTROL_OPERATOR_BITS) | SIM_CONTROL_SYSCALL, \ - ##args) - - -/* Values for the "access_mask" parameters below. */ -#define SIM_WATCHPOINT_READ 1 -#define SIM_WATCHPOINT_WRITE 2 -#define SIM_WATCHPOINT_EXECUTE 4 - - -static __inline int -sim_add_watchpoint(unsigned int process_id, - unsigned long address, - unsigned long size, - unsigned int access_mask, - unsigned long user_data) -{ - return _sim_syscall(SIM_SYSCALL_ADD_WATCHPOINT, 5, process_id, - address, size, access_mask, user_data); -} - - -static __inline int -sim_remove_watchpoint(unsigned int process_id, - unsigned long address, - unsigned long size, - unsigned int access_mask, - unsigned long user_data) -{ - return _sim_syscall(SIM_SYSCALL_REMOVE_WATCHPOINT, 5, process_id, - address, size, access_mask, user_data); -} - - -/** - * Return value from sim_query_watchpoint. - */ -struct SimQueryWatchpointStatus -{ - /** - * 0 if a watchpoint fired, 1 if no watchpoint fired, or -1 for - * error (meaning a bad process_id). - */ - int syscall_status; - - /** - * The address of the watchpoint that fired (this is the address - * passed to sim_add_watchpoint, not an address within that range - * that actually triggered the watchpoint). - */ - unsigned long address; - - /** The arbitrary user_data installed by sim_add_watchpoint. */ - unsigned long user_data; -}; - - -static __inline struct SimQueryWatchpointStatus -sim_query_watchpoint(unsigned int process_id) -{ - struct SimQueryWatchpointStatus status; - long val = SIM_CONTROL_SYSCALL | - (SIM_SYSCALL_QUERY_WATCHPOINT << _SIM_CONTROL_OPERATOR_BITS); - __asm__ __volatile__ ("{ and zero, r1, r1; mtspr SIM_CONTROL, r0 }" - : "=R00" (status.syscall_status), - "=R01" (status.address), - "=R02" (status.user_data) - : "R00" (val), "R01" (process_id)); - return status; -} - - -/* On the simulator, confirm lines have been evicted everywhere. */ -static __inline void -sim_validate_lines_evicted(unsigned long long pa, unsigned long length) -{ -#ifdef __LP64__ - _sim_syscall(SIM_SYSCALL_VALIDATE_LINES_EVICTED, 2, pa, length); -#else - _sim_syscall(SIM_SYSCALL_VALIDATE_LINES_EVICTED, 4, - 0 /* dummy */, (long)(pa), (long)(pa >> 32), length); -#endif -} - - -/* Return the current CPU speed in cycles per second. */ -static __inline long -sim_query_cpu_speed(void) -{ - return _sim_syscall(SIM_SYSCALL_QUERY_CPU_SPEED, 0); -} - -#endif /* !__DOXYGEN__ */ - - - - -/** - * Modify the shaping parameters of a shim. - * - * @param shim The shim to modify. One of: - * SIM_CONTROL_SHAPING_GBE_0 - * SIM_CONTROL_SHAPING_GBE_1 - * SIM_CONTROL_SHAPING_GBE_2 - * SIM_CONTROL_SHAPING_GBE_3 - * SIM_CONTROL_SHAPING_XGBE_0 - * SIM_CONTROL_SHAPING_XGBE_1 - * - * @param type The type of shaping. This should be the same type of - * shaping that is already in place on the shim. One of: - * SIM_CONTROL_SHAPING_MULTIPLIER - * SIM_CONTROL_SHAPING_PPS - * SIM_CONTROL_SHAPING_BPS - * - * @param units The magnitude of the rate. One of: - * SIM_CONTROL_SHAPING_UNITS_SINGLE - * SIM_CONTROL_SHAPING_UNITS_KILO - * SIM_CONTROL_SHAPING_UNITS_MEGA - * SIM_CONTROL_SHAPING_UNITS_GIGA - * - * @param rate The rate to which to change it. This must fit in - * SIM_CONTROL_SHAPING_RATE_BITS bits or a warning is issued and - * the shaping is not changed. - * - * @return 0 if no problems were detected in the arguments to sim_set_shaping - * or 1 if problems were detected (for example, rate does not fit in 17 bits). - */ -static __inline int -sim_set_shaping(unsigned shim, - unsigned type, - unsigned units, - unsigned rate) -{ - if ((rate & ~((1 << SIM_CONTROL_SHAPING_RATE_BITS) - 1)) != 0) - return 1; - - __insn_mtspr(SPR_SIM_CONTROL, SIM_SHAPING_SPR_ARG(shim, type, units, rate)); - return 0; -} - -#ifdef __tilegx__ - -/** Enable a set of mPIPE links. Pass a -1 link_mask to enable all links. */ -static __inline void -sim_enable_mpipe_links(unsigned mpipe, unsigned long link_mask) -{ - __insn_mtspr(SPR_SIM_CONTROL, - (SIM_CONTROL_ENABLE_MPIPE_LINK_MAGIC_BYTE | - (mpipe << 8) | (1 << 16) | ((uint_reg_t)link_mask << 32))); -} - -/** Disable a set of mPIPE links. Pass a -1 link_mask to disable all links. */ -static __inline void -sim_disable_mpipe_links(unsigned mpipe, unsigned long link_mask) -{ - __insn_mtspr(SPR_SIM_CONTROL, - (SIM_CONTROL_ENABLE_MPIPE_LINK_MAGIC_BYTE | - (mpipe << 8) | (0 << 16) | ((uint_reg_t)link_mask << 32))); -} - -#endif /* __tilegx__ */ - - -/* - * An API for changing "functional" mode. - */ - -#ifndef __DOXYGEN__ - -#define sim_enable_functional() \ - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_ENABLE_FUNCTIONAL) - -#define sim_disable_functional() \ - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_DISABLE_FUNCTIONAL) - -#endif /* __DOXYGEN__ */ - - -/* - * Profiler support. - */ - -/** - * Turn profiling on for the current task. - * - * Note that this has no effect if run in an environment without - * profiling support (thus, the proper flags to the simulator must - * be supplied). - */ -static __inline void -sim_profiler_enable(void) -{ - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PROFILER_ENABLE); -} - - -/** Turn profiling off for the current task. */ -static __inline void -sim_profiler_disable(void) -{ - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PROFILER_DISABLE); -} - - -/** - * Turn profiling on or off for the current task. - * - * @param enabled If true, turns on profiling. If false, turns it off. - * - * Note that this has no effect if run in an environment without - * profiling support (thus, the proper flags to the simulator must - * be supplied). - */ -static __inline void -sim_profiler_set_enabled(int enabled) -{ - int val = - enabled ? SIM_CONTROL_PROFILER_ENABLE : SIM_CONTROL_PROFILER_DISABLE; - __insn_mtspr(SPR_SIM_CONTROL, val); -} - - -/** - * Return true if and only if profiling is currently enabled - * for the current task. - * - * This returns false even if sim_profiler_enable() was called - * if the current execution environment does not support profiling. - */ -static __inline int -sim_profiler_is_enabled(void) -{ - return ((__insn_mfspr(SPR_SIM_CONTROL) & SIM_PROFILER_ENABLED_MASK) != 0); -} - - -/** - * Reset profiling counters to zero for the current task. - * - * Resetting can be done while profiling is enabled. It does not affect - * the chip-wide profiling counters. - */ -static __inline void -sim_profiler_clear(void) -{ - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PROFILER_CLEAR); -} - - -/** - * Enable specified chip-level profiling counters. - * - * Does not affect the per-task profiling counters. - * - * @param mask Either this special value: - * - * SIM_CHIP_ALL (enables all chip-level components). - * - * or the bitwise OR of these values: - * - * SIM_CHIP_MEMCTL (enable all memory controllers) - * SIM_CHIP_XAUI (enable all XAUI controllers) - * SIM_CHIP_MPIPE (enable all MPIPE controllers) - */ -static __inline void -sim_profiler_chip_enable(unsigned int mask) -{ - __insn_mtspr(SPR_SIM_CONTROL, SIM_PROFILER_CHIP_ENABLE_SPR_ARG(mask)); -} - - -/** - * Disable specified chip-level profiling counters. - * - * Does not affect the per-task profiling counters. - * - * @param mask Either this special value: - * - * SIM_CHIP_ALL (disables all chip-level components). - * - * or the bitwise OR of these values: - * - * SIM_CHIP_MEMCTL (disable all memory controllers) - * SIM_CHIP_XAUI (disable all XAUI controllers) - * SIM_CHIP_MPIPE (disable all MPIPE controllers) - */ -static __inline void -sim_profiler_chip_disable(unsigned int mask) -{ - __insn_mtspr(SPR_SIM_CONTROL, SIM_PROFILER_CHIP_DISABLE_SPR_ARG(mask)); -} - - -/** - * Reset specified chip-level profiling counters to zero. - * - * Does not affect the per-task profiling counters. - * - * @param mask Either this special value: - * - * SIM_CHIP_ALL (clears all chip-level components). - * - * or the bitwise OR of these values: - * - * SIM_CHIP_MEMCTL (clear all memory controllers) - * SIM_CHIP_XAUI (clear all XAUI controllers) - * SIM_CHIP_MPIPE (clear all MPIPE controllers) - */ -static __inline void -sim_profiler_chip_clear(unsigned int mask) -{ - __insn_mtspr(SPR_SIM_CONTROL, SIM_PROFILER_CHIP_CLEAR_SPR_ARG(mask)); -} - - -/* - * Event support. - */ - -#ifndef __DOXYGEN__ - -static __inline void -sim_event_begin(unsigned int x) -{ -#if defined(__tile__) && !defined(__NO_EVENT_SPR__) - __insn_mtspr(SPR_EVENT_BEGIN, x); -#endif -} - -static __inline void -sim_event_end(unsigned int x) -{ -#if defined(__tile__) && !defined(__NO_EVENT_SPR__) - __insn_mtspr(SPR_EVENT_END, x); -#endif -} - -#endif /* !__DOXYGEN__ */ - -#endif /* !__ASSEMBLER__ */ - -#endif /* !__ARCH_SIM_H__ */ - -/** @} */ diff --git a/arch/tile/include/uapi/arch/sim_def.h b/arch/tile/include/uapi/arch/sim_def.h deleted file mode 100644 index f74f9943770d..000000000000 --- a/arch/tile/include/uapi/arch/sim_def.h +++ /dev/null @@ -1,506 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/** - * @file - * - * Some low-level simulator definitions. - */ - -#ifndef __ARCH_SIM_DEF_H__ -#define __ARCH_SIM_DEF_H__ - - -/** - * Internal: the low bits of the SIM_CONTROL_* SPR values specify - * the operation to perform, and the remaining bits are - * an operation-specific parameter (often unused). - */ -#define _SIM_CONTROL_OPERATOR_BITS 8 - - -/* - * Values which can be written to SPR_SIM_CONTROL. - */ - -/** If written to SPR_SIM_CONTROL, stops profiling. */ -#define SIM_CONTROL_PROFILER_DISABLE 0 - -/** If written to SPR_SIM_CONTROL, starts profiling. */ -#define SIM_CONTROL_PROFILER_ENABLE 1 - -/** If written to SPR_SIM_CONTROL, clears profiling counters. */ -#define SIM_CONTROL_PROFILER_CLEAR 2 - -/** If written to SPR_SIM_CONTROL, checkpoints the simulator. */ -#define SIM_CONTROL_CHECKPOINT 3 - -/** - * If written to SPR_SIM_CONTROL, combined with a mask (shifted by 8), - * sets the tracing mask to the given mask. See "sim_set_tracing()". - */ -#define SIM_CONTROL_SET_TRACING 4 - -/** - * If written to SPR_SIM_CONTROL, combined with a mask (shifted by 8), - * dumps the requested items of machine state to the log. - */ -#define SIM_CONTROL_DUMP 5 - -/** If written to SPR_SIM_CONTROL, clears chip-level profiling counters. */ -#define SIM_CONTROL_PROFILER_CHIP_CLEAR 6 - -/** If written to SPR_SIM_CONTROL, disables chip-level profiling. */ -#define SIM_CONTROL_PROFILER_CHIP_DISABLE 7 - -/** If written to SPR_SIM_CONTROL, enables chip-level profiling. */ -#define SIM_CONTROL_PROFILER_CHIP_ENABLE 8 - -/** If written to SPR_SIM_CONTROL, enables chip-level functional mode */ -#define SIM_CONTROL_ENABLE_FUNCTIONAL 9 - -/** If written to SPR_SIM_CONTROL, disables chip-level functional mode. */ -#define SIM_CONTROL_DISABLE_FUNCTIONAL 10 - -/** - * If written to SPR_SIM_CONTROL, enables chip-level functional mode. - * All tiles must perform this write for functional mode to be enabled. - * Ignored in naked boot mode unless --functional is specified. - * WARNING: Only the hypervisor startup code should use this! - */ -#define SIM_CONTROL_ENABLE_FUNCTIONAL_BARRIER 11 - -/** - * If written to SPR_SIM_CONTROL, combined with a character (shifted by 8), - * writes a string directly to the simulator output. Written to once for - * each character in the string, plus a final NUL. Instead of NUL, - * you can also use "SIM_PUTC_FLUSH_STRING" or "SIM_PUTC_FLUSH_BINARY". - */ -/* ISSUE: Document the meaning of "newline", and the handling of NUL. */ -#define SIM_CONTROL_PUTC 12 - -/** - * If written to SPR_SIM_CONTROL, clears the --grind-coherence state for - * this core. This is intended to be used before a loop that will - * invalidate the cache by loading new data and evicting all current data. - * Generally speaking, this API should only be used by system code. - */ -#define SIM_CONTROL_GRINDER_CLEAR 13 - -/** If written to SPR_SIM_CONTROL, shuts down the simulator. */ -#define SIM_CONTROL_SHUTDOWN 14 - -/** - * If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8), - * indicates that a fork syscall just created the given process. - */ -#define SIM_CONTROL_OS_FORK 15 - -/** - * If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8), - * indicates that an exit syscall was just executed by the given process. - */ -#define SIM_CONTROL_OS_EXIT 16 - -/** - * If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8), - * indicates that the OS just switched to the given process. - */ -#define SIM_CONTROL_OS_SWITCH 17 - -/** - * If written to SPR_SIM_CONTROL, combined with a character (shifted by 8), - * indicates that an exec syscall was just executed. Written to once for - * each character in the executable name, plus a final NUL. - */ -#define SIM_CONTROL_OS_EXEC 18 - -/** - * If written to SPR_SIM_CONTROL, combined with a character (shifted by 8), - * indicates that an interpreter (PT_INTERP) was loaded. Written to once - * for each character in "ADDR:PATH", plus a final NUL, where "ADDR" is a - * hex load address starting with "0x", and "PATH" is the executable name. - */ -#define SIM_CONTROL_OS_INTERP 19 - -/** - * If written to SPR_SIM_CONTROL, combined with a character (shifted by 8), - * indicates that a dll was loaded. Written to once for each character - * in "ADDR:PATH", plus a final NUL, where "ADDR" is a hexadecimal load - * address starting with "0x", and "PATH" is the executable name. - */ -#define SIM_CONTROL_DLOPEN 20 - -/** - * If written to SPR_SIM_CONTROL, combined with a character (shifted by 8), - * indicates that a dll was unloaded. Written to once for each character - * in "ADDR", plus a final NUL, where "ADDR" is a hexadecimal load - * address starting with "0x". - */ -#define SIM_CONTROL_DLCLOSE 21 - -/** - * If written to SPR_SIM_CONTROL, combined with a flag (shifted by 8), - * indicates whether to allow data reads to remotely-cached - * dirty cache lines to be cached locally without grinder warnings or - * assertions (used by Linux kernel fast memcpy). - */ -#define SIM_CONTROL_ALLOW_MULTIPLE_CACHING 22 - -/** If written to SPR_SIM_CONTROL, enables memory tracing. */ -#define SIM_CONTROL_ENABLE_MEM_LOGGING 23 - -/** If written to SPR_SIM_CONTROL, disables memory tracing. */ -#define SIM_CONTROL_DISABLE_MEM_LOGGING 24 - -/** - * If written to SPR_SIM_CONTROL, changes the shaping parameters of one of - * the gbe or xgbe shims. Must specify the shim id, the type, the units, and - * the rate, as defined in SIM_SHAPING_SPR_ARG. - */ -#define SIM_CONTROL_SHAPING 25 - -/** - * If written to SPR_SIM_CONTROL, combined with character (shifted by 8), - * requests that a simulator command be executed. Written to once for each - * character in the command, plus a final NUL. - */ -#define SIM_CONTROL_COMMAND 26 - -/** - * If written to SPR_SIM_CONTROL, indicates that the simulated system - * is panicking, to allow debugging via --debug-on-panic. - */ -#define SIM_CONTROL_PANIC 27 - -/** - * If written to SPR_SIM_CONTROL, triggers a simulator syscall. - * See "sim_syscall()" for more info. - */ -#define SIM_CONTROL_SYSCALL 32 - -/** - * If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8), - * provides the pid that subsequent SIM_CONTROL_OS_FORK writes should - * use as the pid, rather than the default previous SIM_CONTROL_OS_SWITCH. - */ -#define SIM_CONTROL_OS_FORK_PARENT 33 - -/** - * If written to SPR_SIM_CONTROL, combined with a mPIPE shim number - * (shifted by 8), clears the pending magic data section. The cleared - * pending magic data section and any subsequently appended magic bytes - * will only take effect when the classifier blast programmer is run. - */ -#define SIM_CONTROL_CLEAR_MPIPE_MAGIC_BYTES 34 - -/** - * If written to SPR_SIM_CONTROL, combined with a mPIPE shim number - * (shifted by 8) and a byte of data (shifted by 16), appends that byte - * to the shim's pending magic data section. The pending magic data - * section takes effect when the classifier blast programmer is run. - */ -#define SIM_CONTROL_APPEND_MPIPE_MAGIC_BYTE 35 - -/** - * If written to SPR_SIM_CONTROL, combined with a mPIPE shim number - * (shifted by 8), an enable=1/disable=0 bit (shifted by 16), and a - * mask of links (shifted by 32), enable or disable the corresponding - * mPIPE links. - */ -#define SIM_CONTROL_ENABLE_MPIPE_LINK_MAGIC_BYTE 36 - - -/* - * Syscall numbers for use with "sim_syscall()". - */ - -/** Syscall number for sim_add_watchpoint(). */ -#define SIM_SYSCALL_ADD_WATCHPOINT 2 - -/** Syscall number for sim_remove_watchpoint(). */ -#define SIM_SYSCALL_REMOVE_WATCHPOINT 3 - -/** Syscall number for sim_query_watchpoint(). */ -#define SIM_SYSCALL_QUERY_WATCHPOINT 4 - -/** - * Syscall number that asserts that the cache lines whose 64-bit PA - * is passed as the second argument to sim_syscall(), and over a - * range passed as the third argument, are no longer in cache. - * The simulator raises an error if this is not the case. - */ -#define SIM_SYSCALL_VALIDATE_LINES_EVICTED 5 - -/** Syscall number for sim_query_cpu_speed(). */ -#define SIM_SYSCALL_QUERY_CPU_SPEED 6 - - -/* - * Bit masks which can be shifted by 8, combined with - * SIM_CONTROL_SET_TRACING, and written to SPR_SIM_CONTROL. - */ - -/** - * @addtogroup arch_sim - * @{ - */ - -/** Enable --trace-cycle when passed to simulator_set_tracing(). */ -#define SIM_TRACE_CYCLES 0x01 - -/** Enable --trace-router when passed to simulator_set_tracing(). */ -#define SIM_TRACE_ROUTER 0x02 - -/** Enable --trace-register-writes when passed to simulator_set_tracing(). */ -#define SIM_TRACE_REGISTER_WRITES 0x04 - -/** Enable --trace-disasm when passed to simulator_set_tracing(). */ -#define SIM_TRACE_DISASM 0x08 - -/** Enable --trace-stall-info when passed to simulator_set_tracing(). */ -#define SIM_TRACE_STALL_INFO 0x10 - -/** Enable --trace-memory-controller when passed to simulator_set_tracing(). */ -#define SIM_TRACE_MEMORY_CONTROLLER 0x20 - -/** Enable --trace-l2 when passed to simulator_set_tracing(). */ -#define SIM_TRACE_L2_CACHE 0x40 - -/** Enable --trace-lines when passed to simulator_set_tracing(). */ -#define SIM_TRACE_LINES 0x80 - -/** Turn off all tracing when passed to simulator_set_tracing(). */ -#define SIM_TRACE_NONE 0 - -/** Turn on all tracing when passed to simulator_set_tracing(). */ -#define SIM_TRACE_ALL (-1) - -/** @} */ - -/** Computes the value to write to SPR_SIM_CONTROL to set tracing flags. */ -#define SIM_TRACE_SPR_ARG(mask) \ - (SIM_CONTROL_SET_TRACING | ((mask) << _SIM_CONTROL_OPERATOR_BITS)) - - -/* - * Bit masks which can be shifted by 8, combined with - * SIM_CONTROL_DUMP, and written to SPR_SIM_CONTROL. - */ - -/** - * @addtogroup arch_sim - * @{ - */ - -/** Dump the general-purpose registers. */ -#define SIM_DUMP_REGS 0x001 - -/** Dump the SPRs. */ -#define SIM_DUMP_SPRS 0x002 - -/** Dump the ITLB. */ -#define SIM_DUMP_ITLB 0x004 - -/** Dump the DTLB. */ -#define SIM_DUMP_DTLB 0x008 - -/** Dump the L1 I-cache. */ -#define SIM_DUMP_L1I 0x010 - -/** Dump the L1 D-cache. */ -#define SIM_DUMP_L1D 0x020 - -/** Dump the L2 cache. */ -#define SIM_DUMP_L2 0x040 - -/** Dump the switch registers. */ -#define SIM_DUMP_SNREGS 0x080 - -/** Dump the switch ITLB. */ -#define SIM_DUMP_SNITLB 0x100 - -/** Dump the switch L1 I-cache. */ -#define SIM_DUMP_SNL1I 0x200 - -/** Dump the current backtrace. */ -#define SIM_DUMP_BACKTRACE 0x400 - -/** Only dump valid lines in caches. */ -#define SIM_DUMP_VALID_LINES 0x800 - -/** Dump everything that is dumpable. */ -#define SIM_DUMP_ALL (-1 & ~SIM_DUMP_VALID_LINES) - -/** @} */ - -/** Computes the value to write to SPR_SIM_CONTROL to dump machine state. */ -#define SIM_DUMP_SPR_ARG(mask) \ - (SIM_CONTROL_DUMP | ((mask) << _SIM_CONTROL_OPERATOR_BITS)) - - -/* - * Bit masks which can be shifted by 8, combined with - * SIM_CONTROL_PROFILER_CHIP_xxx, and written to SPR_SIM_CONTROL. - */ - -/** - * @addtogroup arch_sim - * @{ - */ - -/** Use with SIM_PROFILER_CHIP_xxx to control the memory controllers. */ -#define SIM_CHIP_MEMCTL 0x001 - -/** Use with SIM_PROFILER_CHIP_xxx to control the XAUI interface. */ -#define SIM_CHIP_XAUI 0x002 - -/** Use with SIM_PROFILER_CHIP_xxx to control the PCIe interface. */ -#define SIM_CHIP_PCIE 0x004 - -/** Use with SIM_PROFILER_CHIP_xxx to control the MPIPE interface. */ -#define SIM_CHIP_MPIPE 0x008 - -/** Use with SIM_PROFILER_CHIP_xxx to control the TRIO interface. */ -#define SIM_CHIP_TRIO 0x010 - -/** Reference all chip devices. */ -#define SIM_CHIP_ALL (-1) - -/** @} */ - -/** Computes the value to write to SPR_SIM_CONTROL to clear chip statistics. */ -#define SIM_PROFILER_CHIP_CLEAR_SPR_ARG(mask) \ - (SIM_CONTROL_PROFILER_CHIP_CLEAR | ((mask) << _SIM_CONTROL_OPERATOR_BITS)) - -/** Computes the value to write to SPR_SIM_CONTROL to disable chip statistics.*/ -#define SIM_PROFILER_CHIP_DISABLE_SPR_ARG(mask) \ - (SIM_CONTROL_PROFILER_CHIP_DISABLE | ((mask) << _SIM_CONTROL_OPERATOR_BITS)) - -/** Computes the value to write to SPR_SIM_CONTROL to enable chip statistics. */ -#define SIM_PROFILER_CHIP_ENABLE_SPR_ARG(mask) \ - (SIM_CONTROL_PROFILER_CHIP_ENABLE | ((mask) << _SIM_CONTROL_OPERATOR_BITS)) - - - -/* Shim bitrate controls. */ - -/** The number of bits used to store the shim id. */ -#define SIM_CONTROL_SHAPING_SHIM_ID_BITS 3 - -/** - * @addtogroup arch_sim - * @{ - */ - -/** Change the gbe 0 bitrate. */ -#define SIM_CONTROL_SHAPING_GBE_0 0x0 - -/** Change the gbe 1 bitrate. */ -#define SIM_CONTROL_SHAPING_GBE_1 0x1 - -/** Change the gbe 2 bitrate. */ -#define SIM_CONTROL_SHAPING_GBE_2 0x2 - -/** Change the gbe 3 bitrate. */ -#define SIM_CONTROL_SHAPING_GBE_3 0x3 - -/** Change the xgbe 0 bitrate. */ -#define SIM_CONTROL_SHAPING_XGBE_0 0x4 - -/** Change the xgbe 1 bitrate. */ -#define SIM_CONTROL_SHAPING_XGBE_1 0x5 - -/** The type of shaping to do. */ -#define SIM_CONTROL_SHAPING_TYPE_BITS 2 - -/** Control the multiplier. */ -#define SIM_CONTROL_SHAPING_MULTIPLIER 0 - -/** Control the PPS. */ -#define SIM_CONTROL_SHAPING_PPS 1 - -/** Control the BPS. */ -#define SIM_CONTROL_SHAPING_BPS 2 - -/** The number of bits for the units for the shaping parameter. */ -#define SIM_CONTROL_SHAPING_UNITS_BITS 2 - -/** Provide a number in single units. */ -#define SIM_CONTROL_SHAPING_UNITS_SINGLE 0 - -/** Provide a number in kilo units. */ -#define SIM_CONTROL_SHAPING_UNITS_KILO 1 - -/** Provide a number in mega units. */ -#define SIM_CONTROL_SHAPING_UNITS_MEGA 2 - -/** Provide a number in giga units. */ -#define SIM_CONTROL_SHAPING_UNITS_GIGA 3 - -/** @} */ - -/** How many bits are available for the rate. */ -#define SIM_CONTROL_SHAPING_RATE_BITS \ - (32 - (_SIM_CONTROL_OPERATOR_BITS + \ - SIM_CONTROL_SHAPING_SHIM_ID_BITS + \ - SIM_CONTROL_SHAPING_TYPE_BITS + \ - SIM_CONTROL_SHAPING_UNITS_BITS)) - -/** Computes the value to write to SPR_SIM_CONTROL to change a bitrate. */ -#define SIM_SHAPING_SPR_ARG(shim, type, units, rate) \ - (SIM_CONTROL_SHAPING | \ - ((shim) | \ - ((type) << (SIM_CONTROL_SHAPING_SHIM_ID_BITS)) | \ - ((units) << (SIM_CONTROL_SHAPING_SHIM_ID_BITS + \ - SIM_CONTROL_SHAPING_TYPE_BITS)) | \ - ((rate) << (SIM_CONTROL_SHAPING_SHIM_ID_BITS + \ - SIM_CONTROL_SHAPING_TYPE_BITS + \ - SIM_CONTROL_SHAPING_UNITS_BITS))) << _SIM_CONTROL_OPERATOR_BITS) - - -/* - * Values returned when reading SPR_SIM_CONTROL. - * ISSUE: These names should share a longer common prefix. - */ - -/** - * When reading SPR_SIM_CONTROL, the mask of simulator tracing bits - * (SIM_TRACE_xxx values). - */ -#define SIM_TRACE_FLAG_MASK 0xFFFF - -/** When reading SPR_SIM_CONTROL, the mask for whether profiling is enabled. */ -#define SIM_PROFILER_ENABLED_MASK 0x10000 - - -/* - * Special arguments for "SIM_CONTROL_PUTC". - */ - -/** - * Flag value for forcing a PUTC string-flush, including - * coordinate/cycle prefix and newline. - */ -#define SIM_PUTC_FLUSH_STRING 0x100 - -/** - * Flag value for forcing a PUTC binary-data-flush, which skips the - * prefix and does not append a newline. - */ -#define SIM_PUTC_FLUSH_BINARY 0x101 - - -#endif /* __ARCH_SIM_DEF_H__ */ diff --git a/arch/tile/include/uapi/arch/spr_def.h b/arch/tile/include/uapi/arch/spr_def.h deleted file mode 100644 index 743428615cda..000000000000 --- a/arch/tile/include/uapi/arch/spr_def.h +++ /dev/null @@ -1,27 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _UAPI__ARCH_SPR_DEF_H__ -#define _UAPI__ARCH_SPR_DEF_H__ - -/* Include the proper base SPR definition file. */ -#ifdef __tilegx__ -#include <arch/spr_def_64.h> -#else -#include <arch/spr_def_32.h> -#endif - - -#endif /* _UAPI__ARCH_SPR_DEF_H__ */ diff --git a/arch/tile/include/uapi/arch/spr_def_32.h b/arch/tile/include/uapi/arch/spr_def_32.h deleted file mode 100644 index 64122d6160e1..000000000000 --- a/arch/tile/include/uapi/arch/spr_def_32.h +++ /dev/null @@ -1,256 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef __DOXYGEN__ - -#ifndef __ARCH_SPR_DEF_32_H__ -#define __ARCH_SPR_DEF_32_H__ - -#define SPR_AUX_PERF_COUNT_0 0x6005 -#define SPR_AUX_PERF_COUNT_1 0x6006 -#define SPR_AUX_PERF_COUNT_CTL 0x6007 -#define SPR_AUX_PERF_COUNT_STS 0x6008 -#define SPR_CYCLE_HIGH 0x4e06 -#define SPR_CYCLE_LOW 0x4e07 -#define SPR_DMA_BYTE 0x3900 -#define SPR_DMA_CHUNK_SIZE 0x3901 -#define SPR_DMA_CTR 0x3902 -#define SPR_DMA_CTR__REQUEST_MASK 0x1 -#define SPR_DMA_CTR__SUSPEND_MASK 0x2 -#define SPR_DMA_DST_ADDR 0x3903 -#define SPR_DMA_DST_CHUNK_ADDR 0x3904 -#define SPR_DMA_SRC_ADDR 0x3905 -#define SPR_DMA_SRC_CHUNK_ADDR 0x3906 -#define SPR_DMA_STATUS__DONE_MASK 0x1 -#define SPR_DMA_STATUS__BUSY_MASK 0x2 -#define SPR_DMA_STATUS__RUNNING_MASK 0x10 -#define SPR_DMA_STRIDE 0x3907 -#define SPR_DMA_USER_STATUS 0x3908 -#define SPR_DONE 0x4e08 -#define SPR_EVENT_BEGIN 0x4e0d -#define SPR_EVENT_END 0x4e0e -#define SPR_EX_CONTEXT_0_0 0x4a05 -#define SPR_EX_CONTEXT_0_1 0x4a06 -#define SPR_EX_CONTEXT_0_1__PL_SHIFT 0 -#define SPR_EX_CONTEXT_0_1__PL_RMASK 0x3 -#define SPR_EX_CONTEXT_0_1__PL_MASK 0x3 -#define SPR_EX_CONTEXT_0_1__ICS_SHIFT 2 -#define SPR_EX_CONTEXT_0_1__ICS_RMASK 0x1 -#define SPR_EX_CONTEXT_0_1__ICS_MASK 0x4 -#define SPR_EX_CONTEXT_1_0 0x4805 -#define SPR_EX_CONTEXT_1_1 0x4806 -#define SPR_EX_CONTEXT_1_1__PL_SHIFT 0 -#define SPR_EX_CONTEXT_1_1__PL_RMASK 0x3 -#define SPR_EX_CONTEXT_1_1__PL_MASK 0x3 -#define SPR_EX_CONTEXT_1_1__ICS_SHIFT 2 -#define SPR_EX_CONTEXT_1_1__ICS_RMASK 0x1 -#define SPR_EX_CONTEXT_1_1__ICS_MASK 0x4 -#define SPR_EX_CONTEXT_2_0 0x4605 -#define SPR_EX_CONTEXT_2_1 0x4606 -#define SPR_EX_CONTEXT_2_1__PL_SHIFT 0 -#define SPR_EX_CONTEXT_2_1__PL_RMASK 0x3 -#define SPR_EX_CONTEXT_2_1__PL_MASK 0x3 -#define SPR_EX_CONTEXT_2_1__ICS_SHIFT 2 -#define SPR_EX_CONTEXT_2_1__ICS_RMASK 0x1 -#define SPR_EX_CONTEXT_2_1__ICS_MASK 0x4 -#define SPR_FAIL 0x4e09 -#define SPR_IDN_AVAIL_EN 0x3e05 -#define SPR_IDN_CA_DATA 0x0b00 -#define SPR_IDN_DATA_AVAIL 0x0b03 -#define SPR_IDN_DEADLOCK_TIMEOUT 0x3406 -#define SPR_IDN_DEMUX_CA_COUNT 0x0a05 -#define SPR_IDN_DEMUX_COUNT_0 0x0a06 -#define SPR_IDN_DEMUX_COUNT_1 0x0a07 -#define SPR_IDN_DEMUX_CTL 0x0a08 -#define SPR_IDN_DEMUX_QUEUE_SEL 0x0a0a -#define SPR_IDN_DEMUX_STATUS 0x0a0b -#define SPR_IDN_DEMUX_WRITE_FIFO 0x0a0c -#define SPR_IDN_DIRECTION_PROTECT 0x2e05 -#define SPR_IDN_PENDING 0x0a0e -#define SPR_IDN_REFILL_EN 0x0e05 -#define SPR_IDN_SP_FIFO_DATA 0x0a0f -#define SPR_IDN_SP_FIFO_SEL 0x0a10 -#define SPR_IDN_SP_FREEZE 0x0a11 -#define SPR_IDN_SP_FREEZE__SP_FRZ_MASK 0x1 -#define SPR_IDN_SP_FREEZE__DEMUX_FRZ_MASK 0x2 -#define SPR_IDN_SP_FREEZE__NON_DEST_EXT_MASK 0x4 -#define SPR_IDN_SP_STATE 0x0a12 -#define SPR_IDN_TAG_0 0x0a13 -#define SPR_IDN_TAG_1 0x0a14 -#define SPR_IDN_TAG_VALID 0x0a15 -#define SPR_IDN_TILE_COORD 0x0a16 -#define SPR_INTCTRL_0_STATUS 0x4a07 -#define SPR_INTCTRL_1_STATUS 0x4807 -#define SPR_INTCTRL_2_STATUS 0x4607 -#define SPR_INTERRUPT_CRITICAL_SECTION 0x4e0a -#define SPR_INTERRUPT_MASK_0_0 0x4a08 -#define SPR_INTERRUPT_MASK_0_1 0x4a09 -#define SPR_INTERRUPT_MASK_1_0 0x4809 -#define SPR_INTERRUPT_MASK_1_1 0x480a -#define SPR_INTERRUPT_MASK_2_0 0x4608 -#define SPR_INTERRUPT_MASK_2_1 0x4609 -#define SPR_INTERRUPT_MASK_RESET_0_0 0x4a0a -#define SPR_INTERRUPT_MASK_RESET_0_1 0x4a0b -#define SPR_INTERRUPT_MASK_RESET_1_0 0x480b -#define SPR_INTERRUPT_MASK_RESET_1_1 0x480c -#define SPR_INTERRUPT_MASK_RESET_2_0 0x460a -#define SPR_INTERRUPT_MASK_RESET_2_1 0x460b -#define SPR_INTERRUPT_MASK_SET_0_0 0x4a0c -#define SPR_INTERRUPT_MASK_SET_0_1 0x4a0d -#define SPR_INTERRUPT_MASK_SET_1_0 0x480d -#define SPR_INTERRUPT_MASK_SET_1_1 0x480e -#define SPR_INTERRUPT_MASK_SET_2_0 0x460c -#define SPR_INTERRUPT_MASK_SET_2_1 0x460d -#define SPR_MPL_AUX_PERF_COUNT_SET_0 0x6000 -#define SPR_MPL_AUX_PERF_COUNT_SET_1 0x6001 -#define SPR_MPL_AUX_PERF_COUNT_SET_2 0x6002 -#define SPR_MPL_DMA_CPL_SET_0 0x5800 -#define SPR_MPL_DMA_CPL_SET_1 0x5801 -#define SPR_MPL_DMA_CPL_SET_2 0x5802 -#define SPR_MPL_DMA_NOTIFY_SET_0 0x3800 -#define SPR_MPL_DMA_NOTIFY_SET_1 0x3801 -#define SPR_MPL_DMA_NOTIFY_SET_2 0x3802 -#define SPR_MPL_IDN_ACCESS_SET_0 0x0a00 -#define SPR_MPL_IDN_ACCESS_SET_1 0x0a01 -#define SPR_MPL_IDN_ACCESS_SET_2 0x0a02 -#define SPR_MPL_IDN_AVAIL_SET_0 0x3e00 -#define SPR_MPL_IDN_AVAIL_SET_1 0x3e01 -#define SPR_MPL_IDN_AVAIL_SET_2 0x3e02 -#define SPR_MPL_IDN_CA_SET_0 0x3a00 -#define SPR_MPL_IDN_CA_SET_1 0x3a01 -#define SPR_MPL_IDN_CA_SET_2 0x3a02 -#define SPR_MPL_IDN_COMPLETE_SET_0 0x1200 -#define SPR_MPL_IDN_COMPLETE_SET_1 0x1201 -#define SPR_MPL_IDN_COMPLETE_SET_2 0x1202 -#define SPR_MPL_IDN_FIREWALL_SET_0 0x2e00 -#define SPR_MPL_IDN_FIREWALL_SET_1 0x2e01 -#define SPR_MPL_IDN_FIREWALL_SET_2 0x2e02 -#define SPR_MPL_IDN_REFILL_SET_0 0x0e00 -#define SPR_MPL_IDN_REFILL_SET_1 0x0e01 -#define SPR_MPL_IDN_REFILL_SET_2 0x0e02 -#define SPR_MPL_IDN_TIMER_SET_0 0x3400 -#define SPR_MPL_IDN_TIMER_SET_1 0x3401 -#define SPR_MPL_IDN_TIMER_SET_2 0x3402 -#define SPR_MPL_INTCTRL_0_SET_0 0x4a00 -#define SPR_MPL_INTCTRL_0_SET_1 0x4a01 -#define SPR_MPL_INTCTRL_0_SET_2 0x4a02 -#define SPR_MPL_INTCTRL_1_SET_0 0x4800 -#define SPR_MPL_INTCTRL_1_SET_1 0x4801 -#define SPR_MPL_INTCTRL_1_SET_2 0x4802 -#define SPR_MPL_INTCTRL_2_SET_0 0x4600 -#define SPR_MPL_INTCTRL_2_SET_1 0x4601 -#define SPR_MPL_INTCTRL_2_SET_2 0x4602 -#define SPR_MPL_PERF_COUNT_SET_0 0x4200 -#define SPR_MPL_PERF_COUNT_SET_1 0x4201 -#define SPR_MPL_PERF_COUNT_SET_2 0x4202 -#define SPR_MPL_SN_ACCESS_SET_0 0x0800 -#define SPR_MPL_SN_ACCESS_SET_1 0x0801 -#define SPR_MPL_SN_ACCESS_SET_2 0x0802 -#define SPR_MPL_SN_CPL_SET_0 0x5a00 -#define SPR_MPL_SN_CPL_SET_1 0x5a01 -#define SPR_MPL_SN_CPL_SET_2 0x5a02 -#define SPR_MPL_SN_FIREWALL_SET_0 0x2c00 -#define SPR_MPL_SN_FIREWALL_SET_1 0x2c01 -#define SPR_MPL_SN_FIREWALL_SET_2 0x2c02 -#define SPR_MPL_SN_NOTIFY_SET_0 0x2a00 -#define SPR_MPL_SN_NOTIFY_SET_1 0x2a01 -#define SPR_MPL_SN_NOTIFY_SET_2 0x2a02 -#define SPR_MPL_UDN_ACCESS_SET_0 0x0c00 -#define SPR_MPL_UDN_ACCESS_SET_1 0x0c01 -#define SPR_MPL_UDN_ACCESS_SET_2 0x0c02 -#define SPR_MPL_UDN_AVAIL_SET_0 0x4000 -#define SPR_MPL_UDN_AVAIL_SET_1 0x4001 -#define SPR_MPL_UDN_AVAIL_SET_2 0x4002 -#define SPR_MPL_UDN_CA_SET_0 0x3c00 -#define SPR_MPL_UDN_CA_SET_1 0x3c01 -#define SPR_MPL_UDN_CA_SET_2 0x3c02 -#define SPR_MPL_UDN_COMPLETE_SET_0 0x1400 -#define SPR_MPL_UDN_COMPLETE_SET_1 0x1401 -#define SPR_MPL_UDN_COMPLETE_SET_2 0x1402 -#define SPR_MPL_UDN_FIREWALL_SET_0 0x3000 -#define SPR_MPL_UDN_FIREWALL_SET_1 0x3001 -#define SPR_MPL_UDN_FIREWALL_SET_2 0x3002 -#define SPR_MPL_UDN_REFILL_SET_0 0x1000 -#define SPR_MPL_UDN_REFILL_SET_1 0x1001 -#define SPR_MPL_UDN_REFILL_SET_2 0x1002 -#define SPR_MPL_UDN_TIMER_SET_0 0x3600 -#define SPR_MPL_UDN_TIMER_SET_1 0x3601 -#define SPR_MPL_UDN_TIMER_SET_2 0x3602 -#define SPR_MPL_WORLD_ACCESS_SET_0 0x4e00 -#define SPR_MPL_WORLD_ACCESS_SET_1 0x4e01 -#define SPR_MPL_WORLD_ACCESS_SET_2 0x4e02 -#define SPR_PASS 0x4e0b -#define SPR_PERF_COUNT_0 0x4205 -#define SPR_PERF_COUNT_1 0x4206 -#define SPR_PERF_COUNT_CTL 0x4207 -#define SPR_PERF_COUNT_DN_CTL 0x4210 -#define SPR_PERF_COUNT_STS 0x4208 -#define SPR_PROC_STATUS 0x4f00 -#define SPR_SIM_CONTROL 0x4e0c -#define SPR_SNCTL 0x0805 -#define SPR_SNCTL__FRZFABRIC_MASK 0x1 -#define SPR_SNSTATIC 0x080c -#define SPR_SYSTEM_SAVE_0_0 0x4b00 -#define SPR_SYSTEM_SAVE_0_1 0x4b01 -#define SPR_SYSTEM_SAVE_0_2 0x4b02 -#define SPR_SYSTEM_SAVE_0_3 0x4b03 -#define SPR_SYSTEM_SAVE_1_0 0x4900 -#define SPR_SYSTEM_SAVE_1_1 0x4901 -#define SPR_SYSTEM_SAVE_1_2 0x4902 -#define SPR_SYSTEM_SAVE_1_3 0x4903 -#define SPR_SYSTEM_SAVE_2_0 0x4700 -#define SPR_SYSTEM_SAVE_2_1 0x4701 -#define SPR_SYSTEM_SAVE_2_2 0x4702 -#define SPR_SYSTEM_SAVE_2_3 0x4703 -#define SPR_TILE_COORD 0x4c17 -#define SPR_TILE_RTF_HWM 0x4e10 -#define SPR_TILE_TIMER_CONTROL 0x3205 -#define SPR_TILE_WRITE_PENDING 0x4e0f -#define SPR_UDN_AVAIL_EN 0x4005 -#define SPR_UDN_CA_DATA 0x0d00 -#define SPR_UDN_DATA_AVAIL 0x0d03 -#define SPR_UDN_DEADLOCK_TIMEOUT 0x3606 -#define SPR_UDN_DEMUX_CA_COUNT 0x0c05 -#define SPR_UDN_DEMUX_COUNT_0 0x0c06 -#define SPR_UDN_DEMUX_COUNT_1 0x0c07 -#define SPR_UDN_DEMUX_COUNT_2 0x0c08 -#define SPR_UDN_DEMUX_COUNT_3 0x0c09 -#define SPR_UDN_DEMUX_CTL 0x0c0a -#define SPR_UDN_DEMUX_QUEUE_SEL 0x0c0c -#define SPR_UDN_DEMUX_STATUS 0x0c0d -#define SPR_UDN_DEMUX_WRITE_FIFO 0x0c0e -#define SPR_UDN_DIRECTION_PROTECT 0x3005 -#define SPR_UDN_PENDING 0x0c10 -#define SPR_UDN_REFILL_EN 0x1005 -#define SPR_UDN_SP_FIFO_DATA 0x0c11 -#define SPR_UDN_SP_FIFO_SEL 0x0c12 -#define SPR_UDN_SP_FREEZE 0x0c13 -#define SPR_UDN_SP_FREEZE__SP_FRZ_MASK 0x1 -#define SPR_UDN_SP_FREEZE__DEMUX_FRZ_MASK 0x2 -#define SPR_UDN_SP_FREEZE__NON_DEST_EXT_MASK 0x4 -#define SPR_UDN_SP_STATE 0x0c14 -#define SPR_UDN_TAG_0 0x0c15 -#define SPR_UDN_TAG_1 0x0c16 -#define SPR_UDN_TAG_2 0x0c17 -#define SPR_UDN_TAG_3 0x0c18 -#define SPR_UDN_TAG_VALID 0x0c19 -#define SPR_UDN_TILE_COORD 0x0c1a -#define SPR_WATCH_CTL 0x4209 -#define SPR_WATCH_MASK 0x420a -#define SPR_WATCH_VAL 0x420b - -#endif /* !defined(__ARCH_SPR_DEF_32_H__) */ - -#endif /* !defined(__DOXYGEN__) */ diff --git a/arch/tile/include/uapi/arch/spr_def_64.h b/arch/tile/include/uapi/arch/spr_def_64.h deleted file mode 100644 index d183cbb31aa7..000000000000 --- a/arch/tile/include/uapi/arch/spr_def_64.h +++ /dev/null @@ -1,217 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef __DOXYGEN__ - -#ifndef __ARCH_SPR_DEF_64_H__ -#define __ARCH_SPR_DEF_64_H__ - -#define SPR_AUX_PERF_COUNT_0 0x2105 -#define SPR_AUX_PERF_COUNT_1 0x2106 -#define SPR_AUX_PERF_COUNT_CTL 0x2107 -#define SPR_AUX_PERF_COUNT_STS 0x2108 -#define SPR_CMPEXCH_VALUE 0x2780 -#define SPR_CYCLE 0x2781 -#define SPR_DONE 0x2705 -#define SPR_DSTREAM_PF 0x2706 -#define SPR_EVENT_BEGIN 0x2782 -#define SPR_EVENT_END 0x2783 -#define SPR_EX_CONTEXT_0_0 0x2580 -#define SPR_EX_CONTEXT_0_1 0x2581 -#define SPR_EX_CONTEXT_0_1__PL_SHIFT 0 -#define SPR_EX_CONTEXT_0_1__PL_RMASK 0x3 -#define SPR_EX_CONTEXT_0_1__PL_MASK 0x3 -#define SPR_EX_CONTEXT_0_1__ICS_SHIFT 2 -#define SPR_EX_CONTEXT_0_1__ICS_RMASK 0x1 -#define SPR_EX_CONTEXT_0_1__ICS_MASK 0x4 -#define SPR_EX_CONTEXT_1_0 0x2480 -#define SPR_EX_CONTEXT_1_1 0x2481 -#define SPR_EX_CONTEXT_1_1__PL_SHIFT 0 -#define SPR_EX_CONTEXT_1_1__PL_RMASK 0x3 -#define SPR_EX_CONTEXT_1_1__PL_MASK 0x3 -#define SPR_EX_CONTEXT_1_1__ICS_SHIFT 2 -#define SPR_EX_CONTEXT_1_1__ICS_RMASK 0x1 -#define SPR_EX_CONTEXT_1_1__ICS_MASK 0x4 -#define SPR_EX_CONTEXT_2_0 0x2380 -#define SPR_EX_CONTEXT_2_1 0x2381 -#define SPR_EX_CONTEXT_2_1__PL_SHIFT 0 -#define SPR_EX_CONTEXT_2_1__PL_RMASK 0x3 -#define SPR_EX_CONTEXT_2_1__PL_MASK 0x3 -#define SPR_EX_CONTEXT_2_1__ICS_SHIFT 2 -#define SPR_EX_CONTEXT_2_1__ICS_RMASK 0x1 -#define SPR_EX_CONTEXT_2_1__ICS_MASK 0x4 -#define SPR_FAIL 0x2707 -#define SPR_IDN_AVAIL_EN 0x1a05 -#define SPR_IDN_DATA_AVAIL 0x0a80 -#define SPR_IDN_DEADLOCK_TIMEOUT 0x1806 -#define SPR_IDN_DEMUX_COUNT_0 0x0a05 -#define SPR_IDN_DEMUX_COUNT_1 0x0a06 -#define SPR_IDN_DIRECTION_PROTECT 0x1405 -#define SPR_IDN_PENDING 0x0a08 -#define SPR_ILL_TRANS_REASON__I_STREAM_VA_RMASK 0x1 -#define SPR_INTCTRL_0_STATUS 0x2505 -#define SPR_INTCTRL_1_STATUS 0x2405 -#define SPR_INTCTRL_2_STATUS 0x2305 -#define SPR_INTERRUPT_CRITICAL_SECTION 0x2708 -#define SPR_INTERRUPT_MASK_0 0x2506 -#define SPR_INTERRUPT_MASK_1 0x2406 -#define SPR_INTERRUPT_MASK_2 0x2306 -#define SPR_INTERRUPT_MASK_RESET_0 0x2507 -#define SPR_INTERRUPT_MASK_RESET_1 0x2407 -#define SPR_INTERRUPT_MASK_RESET_2 0x2307 -#define SPR_INTERRUPT_MASK_SET_0 0x2508 -#define SPR_INTERRUPT_MASK_SET_1 0x2408 -#define SPR_INTERRUPT_MASK_SET_2 0x2308 -#define SPR_INTERRUPT_VECTOR_BASE_0 0x2509 -#define SPR_INTERRUPT_VECTOR_BASE_1 0x2409 -#define SPR_INTERRUPT_VECTOR_BASE_2 0x2309 -#define SPR_INTERRUPT_VECTOR_BASE_3 0x2209 -#define SPR_IPI_EVENT_0 0x1f05 -#define SPR_IPI_EVENT_1 0x1e05 -#define SPR_IPI_EVENT_2 0x1d05 -#define SPR_IPI_EVENT_RESET_0 0x1f06 -#define SPR_IPI_EVENT_RESET_1 0x1e06 -#define SPR_IPI_EVENT_RESET_2 0x1d06 -#define SPR_IPI_EVENT_SET_0 0x1f07 -#define SPR_IPI_EVENT_SET_1 0x1e07 -#define SPR_IPI_EVENT_SET_2 0x1d07 -#define SPR_IPI_MASK_0 0x1f08 -#define SPR_IPI_MASK_1 0x1e08 -#define SPR_IPI_MASK_2 0x1d08 -#define SPR_IPI_MASK_RESET_0 0x1f09 -#define SPR_IPI_MASK_RESET_1 0x1e09 -#define SPR_IPI_MASK_RESET_2 0x1d09 -#define SPR_IPI_MASK_SET_0 0x1f0a -#define SPR_IPI_MASK_SET_1 0x1e0a -#define SPR_IPI_MASK_SET_2 0x1d0a -#define SPR_MPL_AUX_PERF_COUNT_SET_0 0x2100 -#define SPR_MPL_AUX_PERF_COUNT_SET_1 0x2101 -#define SPR_MPL_AUX_PERF_COUNT_SET_2 0x2102 -#define SPR_MPL_AUX_TILE_TIMER_SET_0 0x1700 -#define SPR_MPL_AUX_TILE_TIMER_SET_1 0x1701 -#define SPR_MPL_AUX_TILE_TIMER_SET_2 0x1702 -#define SPR_MPL_IDN_ACCESS_SET_0 0x0a00 -#define SPR_MPL_IDN_ACCESS_SET_1 0x0a01 -#define SPR_MPL_IDN_ACCESS_SET_2 0x0a02 -#define SPR_MPL_IDN_AVAIL_SET_0 0x1a00 -#define SPR_MPL_IDN_AVAIL_SET_1 0x1a01 -#define SPR_MPL_IDN_AVAIL_SET_2 0x1a02 -#define SPR_MPL_IDN_COMPLETE_SET_0 0x0500 -#define SPR_MPL_IDN_COMPLETE_SET_1 0x0501 -#define SPR_MPL_IDN_COMPLETE_SET_2 0x0502 -#define SPR_MPL_IDN_FIREWALL_SET_0 0x1400 -#define SPR_MPL_IDN_FIREWALL_SET_1 0x1401 -#define SPR_MPL_IDN_FIREWALL_SET_2 0x1402 -#define SPR_MPL_IDN_TIMER_SET_0 0x1800 -#define SPR_MPL_IDN_TIMER_SET_1 0x1801 -#define SPR_MPL_IDN_TIMER_SET_2 0x1802 -#define SPR_MPL_INTCTRL_0_SET_0 0x2500 -#define SPR_MPL_INTCTRL_0_SET_1 0x2501 -#define SPR_MPL_INTCTRL_0_SET_2 0x2502 -#define SPR_MPL_INTCTRL_1_SET_0 0x2400 -#define SPR_MPL_INTCTRL_1_SET_1 0x2401 -#define SPR_MPL_INTCTRL_1_SET_2 0x2402 -#define SPR_MPL_INTCTRL_2_SET_0 0x2300 -#define SPR_MPL_INTCTRL_2_SET_1 0x2301 -#define SPR_MPL_INTCTRL_2_SET_2 0x2302 -#define SPR_MPL_IPI_0 0x1f04 -#define SPR_MPL_IPI_0_SET_0 0x1f00 -#define SPR_MPL_IPI_0_SET_1 0x1f01 -#define SPR_MPL_IPI_0_SET_2 0x1f02 -#define SPR_MPL_IPI_1 0x1e04 -#define SPR_MPL_IPI_1_SET_0 0x1e00 -#define SPR_MPL_IPI_1_SET_1 0x1e01 -#define SPR_MPL_IPI_1_SET_2 0x1e02 -#define SPR_MPL_IPI_2 0x1d04 -#define SPR_MPL_IPI_2_SET_0 0x1d00 -#define SPR_MPL_IPI_2_SET_1 0x1d01 -#define SPR_MPL_IPI_2_SET_2 0x1d02 -#define SPR_MPL_PERF_COUNT_SET_0 0x2000 -#define SPR_MPL_PERF_COUNT_SET_1 0x2001 -#define SPR_MPL_PERF_COUNT_SET_2 0x2002 -#define SPR_MPL_UDN_ACCESS_SET_0 0x0b00 -#define SPR_MPL_UDN_ACCESS_SET_1 0x0b01 -#define SPR_MPL_UDN_ACCESS_SET_2 0x0b02 -#define SPR_MPL_UDN_AVAIL_SET_0 0x1b00 -#define SPR_MPL_UDN_AVAIL_SET_1 0x1b01 -#define SPR_MPL_UDN_AVAIL_SET_2 0x1b02 -#define SPR_MPL_UDN_COMPLETE_SET_0 0x0600 -#define SPR_MPL_UDN_COMPLETE_SET_1 0x0601 -#define SPR_MPL_UDN_COMPLETE_SET_2 0x0602 -#define SPR_MPL_UDN_FIREWALL_SET_0 0x1500 -#define SPR_MPL_UDN_FIREWALL_SET_1 0x1501 -#define SPR_MPL_UDN_FIREWALL_SET_2 0x1502 -#define SPR_MPL_UDN_TIMER_SET_0 0x1900 -#define SPR_MPL_UDN_TIMER_SET_1 0x1901 -#define SPR_MPL_UDN_TIMER_SET_2 0x1902 -#define SPR_MPL_WORLD_ACCESS_SET_0 0x2700 -#define SPR_MPL_WORLD_ACCESS_SET_1 0x2701 -#define SPR_MPL_WORLD_ACCESS_SET_2 0x2702 -#define SPR_PASS 0x2709 -#define SPR_PERF_COUNT_0 0x2005 -#define SPR_PERF_COUNT_1 0x2006 -#define SPR_PERF_COUNT_CTL 0x2007 -#define SPR_PERF_COUNT_DN_CTL 0x2008 -#define SPR_PERF_COUNT_STS 0x2009 -#define SPR_PROC_STATUS 0x2784 -#define SPR_SIM_CONTROL 0x2785 -#define SPR_SINGLE_STEP_CONTROL_0 0x0405 -#define SPR_SINGLE_STEP_CONTROL_0__CANCELED_MASK 0x1 -#define SPR_SINGLE_STEP_CONTROL_0__INHIBIT_MASK 0x2 -#define SPR_SINGLE_STEP_CONTROL_1 0x0305 -#define SPR_SINGLE_STEP_CONTROL_1__CANCELED_MASK 0x1 -#define SPR_SINGLE_STEP_CONTROL_1__INHIBIT_MASK 0x2 -#define SPR_SINGLE_STEP_CONTROL_2 0x0205 -#define SPR_SINGLE_STEP_CONTROL_2__CANCELED_MASK 0x1 -#define SPR_SINGLE_STEP_CONTROL_2__INHIBIT_MASK 0x2 -#define SPR_SINGLE_STEP_EN_0_0 0x250a -#define SPR_SINGLE_STEP_EN_0_1 0x240a -#define SPR_SINGLE_STEP_EN_0_2 0x230a -#define SPR_SINGLE_STEP_EN_1_0 0x250b -#define SPR_SINGLE_STEP_EN_1_1 0x240b -#define SPR_SINGLE_STEP_EN_1_2 0x230b -#define SPR_SINGLE_STEP_EN_2_0 0x250c -#define SPR_SINGLE_STEP_EN_2_1 0x240c -#define SPR_SINGLE_STEP_EN_2_2 0x230c -#define SPR_SYSTEM_SAVE_0_0 0x2582 -#define SPR_SYSTEM_SAVE_0_1 0x2583 -#define SPR_SYSTEM_SAVE_0_2 0x2584 -#define SPR_SYSTEM_SAVE_0_3 0x2585 -#define SPR_SYSTEM_SAVE_1_0 0x2482 -#define SPR_SYSTEM_SAVE_1_1 0x2483 -#define SPR_SYSTEM_SAVE_1_2 0x2484 -#define SPR_SYSTEM_SAVE_1_3 0x2485 -#define SPR_SYSTEM_SAVE_2_0 0x2382 -#define SPR_SYSTEM_SAVE_2_1 0x2383 -#define SPR_SYSTEM_SAVE_2_2 0x2384 -#define SPR_SYSTEM_SAVE_2_3 0x2385 -#define SPR_TILE_COORD 0x270b -#define SPR_TILE_RTF_HWM 0x270c -#define SPR_TILE_TIMER_CONTROL 0x1605 -#define SPR_UDN_AVAIL_EN 0x1b05 -#define SPR_UDN_DATA_AVAIL 0x0b80 -#define SPR_UDN_DEADLOCK_TIMEOUT 0x1906 -#define SPR_UDN_DEMUX_COUNT_0 0x0b05 -#define SPR_UDN_DEMUX_COUNT_1 0x0b06 -#define SPR_UDN_DEMUX_COUNT_2 0x0b07 -#define SPR_UDN_DEMUX_COUNT_3 0x0b08 -#define SPR_UDN_DIRECTION_PROTECT 0x1505 -#define SPR_UDN_PENDING 0x0b0a -#define SPR_WATCH_MASK 0x200a -#define SPR_WATCH_VAL 0x200b - -#endif /* !defined(__ARCH_SPR_DEF_64_H__) */ - -#endif /* !defined(__DOXYGEN__) */ diff --git a/arch/tile/include/uapi/asm/Kbuild b/arch/tile/include/uapi/asm/Kbuild deleted file mode 100644 index cc439612bcd5..000000000000 --- a/arch/tile/include/uapi/asm/Kbuild +++ /dev/null @@ -1,24 +0,0 @@ -# UAPI Header export list -include include/uapi/asm-generic/Kbuild.asm - -generic-y += bpf_perf_event.h -generic-y += errno.h -generic-y += fcntl.h -generic-y += ioctl.h -generic-y += ioctls.h -generic-y += ipcbuf.h -generic-y += msgbuf.h -generic-y += param.h -generic-y += poll.h -generic-y += posix_types.h -generic-y += resource.h -generic-y += sembuf.h -generic-y += shmbuf.h -generic-y += shmparam.h -generic-y += socket.h -generic-y += sockios.h -generic-y += statfs.h -generic-y += termbits.h -generic-y += termios.h -generic-y += types.h -generic-y += ucontext.h diff --git a/arch/tile/include/uapi/asm/auxvec.h b/arch/tile/include/uapi/asm/auxvec.h deleted file mode 100644 index 922383ce8f4f..000000000000 --- a/arch/tile/include/uapi/asm/auxvec.h +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_AUXVEC_H -#define _ASM_TILE_AUXVEC_H - -/* The vDSO location. */ -#define AT_SYSINFO_EHDR 33 - -#define AT_VECTOR_SIZE_ARCH 1 /* entries in ARCH_DLINFO */ - -#endif /* _ASM_TILE_AUXVEC_H */ diff --git a/arch/tile/include/uapi/asm/bitsperlong.h b/arch/tile/include/uapi/asm/bitsperlong.h deleted file mode 100644 index 57cca78c0fbb..000000000000 --- a/arch/tile/include/uapi/asm/bitsperlong.h +++ /dev/null @@ -1,27 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_BITSPERLONG_H -#define _ASM_TILE_BITSPERLONG_H - -#ifdef __LP64__ -# define __BITS_PER_LONG 64 -#else -# define __BITS_PER_LONG 32 -#endif - -#include <asm-generic/bitsperlong.h> - -#endif /* _ASM_TILE_BITSPERLONG_H */ diff --git a/arch/tile/include/uapi/asm/byteorder.h b/arch/tile/include/uapi/asm/byteorder.h deleted file mode 100644 index d508e61c1e56..000000000000 --- a/arch/tile/include/uapi/asm/byteorder.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#if defined (__BIG_ENDIAN__) -#include <linux/byteorder/big_endian.h> -#else -#include <linux/byteorder/little_endian.h> -#endif diff --git a/arch/tile/include/uapi/asm/cachectl.h b/arch/tile/include/uapi/asm/cachectl.h deleted file mode 100644 index ed8bac28a1b9..000000000000 --- a/arch/tile/include/uapi/asm/cachectl.h +++ /dev/null @@ -1,43 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_CACHECTL_H -#define _ASM_TILE_CACHECTL_H - -/* - * Options for cacheflush system call. - * - * The ICACHE flush is performed on all cores currently running the - * current process's address space. The intent is for user - * applications to be able to modify code, invoke the system call, - * then allow arbitrary other threads in the same address space to see - * the newly-modified code. Passing a length of CHIP_L1I_CACHE_SIZE() - * or more invalidates the entire icache on all cores in the address - * spaces. (Note: currently this option invalidates the entire icache - * regardless of the requested address and length, but we may choose - * to honor the arguments at some point.) - * - * Flush and invalidation of memory can normally be performed with the - * __insn_flush() and __insn_finv() instructions from userspace. - * The DCACHE option to the system call allows userspace - * to flush the entire L1+L2 data cache from the core. In this case, - * the address and length arguments are not used. The DCACHE flush is - * restricted to the current core, not all cores in the address space. - */ -#define ICACHE (1<<0) /* invalidate L1 instruction cache */ -#define DCACHE (1<<1) /* flush and invalidate data cache */ -#define BCACHE (ICACHE|DCACHE) /* flush both caches */ - -#endif /* _ASM_TILE_CACHECTL_H */ diff --git a/arch/tile/include/uapi/asm/hardwall.h b/arch/tile/include/uapi/asm/hardwall.h deleted file mode 100644 index f02e9132ae71..000000000000 --- a/arch/tile/include/uapi/asm/hardwall.h +++ /dev/null @@ -1,52 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Provide methods for access control of per-cpu resources like - * UDN, IDN, or IPI. - */ - -#ifndef _UAPI_ASM_TILE_HARDWALL_H -#define _UAPI_ASM_TILE_HARDWALL_H - -#include <arch/chip.h> -#include <linux/ioctl.h> - -#define HARDWALL_IOCTL_BASE 0xa2 - -/* - * The HARDWALL_CREATE() ioctl is a macro with a "size" argument. - * The resulting ioctl value is passed to the kernel in conjunction - * with a pointer to a standard kernel bitmask of cpus. - * For network resources (UDN or IDN) the bitmask must physically - * represent a rectangular configuration on the chip. - * The "size" is the number of bytes of cpu mask data. - */ -#define _HARDWALL_CREATE 1 -#define HARDWALL_CREATE(size) \ - _IOC(_IOC_READ, HARDWALL_IOCTL_BASE, _HARDWALL_CREATE, (size)) - -#define _HARDWALL_ACTIVATE 2 -#define HARDWALL_ACTIVATE \ - _IO(HARDWALL_IOCTL_BASE, _HARDWALL_ACTIVATE) - -#define _HARDWALL_DEACTIVATE 3 -#define HARDWALL_DEACTIVATE \ - _IO(HARDWALL_IOCTL_BASE, _HARDWALL_DEACTIVATE) - -#define _HARDWALL_GET_ID 4 -#define HARDWALL_GET_ID \ - _IO(HARDWALL_IOCTL_BASE, _HARDWALL_GET_ID) - - -#endif /* _UAPI_ASM_TILE_HARDWALL_H */ diff --git a/arch/tile/include/uapi/asm/kvm_para.h b/arch/tile/include/uapi/asm/kvm_para.h deleted file mode 100644 index baacc4996d18..000000000000 --- a/arch/tile/include/uapi/asm/kvm_para.h +++ /dev/null @@ -1,2 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#include <asm-generic/kvm_para.h> diff --git a/arch/tile/include/uapi/asm/mman.h b/arch/tile/include/uapi/asm/mman.h deleted file mode 100644 index 9b7add95926b..000000000000 --- a/arch/tile/include/uapi/asm/mman.h +++ /dev/null @@ -1,43 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_MMAN_H -#define _ASM_TILE_MMAN_H - -#include <asm-generic/mman-common.h> -#include <arch/chip.h> - -/* Standard Linux flags */ - -#define MAP_POPULATE 0x0040 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x0080 /* do not block on IO */ -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_STACK MAP_GROWSDOWN /* provide convenience alias */ -#define MAP_LOCKED 0x0200 /* pages are locked */ -#define MAP_NORESERVE 0x0400 /* don't check for reservations */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_HUGETLB 0x4000 /* create a huge page mapping */ - - -/* - * Flags for mlockall - */ -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ -#define MCL_ONFAULT 4 /* lock all pages that are faulted in */ - - -#endif /* _ASM_TILE_MMAN_H */ diff --git a/arch/tile/include/uapi/asm/ptrace.h b/arch/tile/include/uapi/asm/ptrace.h deleted file mode 100644 index 667ed742f4dd..000000000000 --- a/arch/tile/include/uapi/asm/ptrace.h +++ /dev/null @@ -1,99 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _UAPI_ASM_TILE_PTRACE_H -#define _UAPI_ASM_TILE_PTRACE_H - -#include <arch/chip.h> -#include <arch/abi.h> - -/* These must match struct pt_regs, below. */ -#if CHIP_WORD_SIZE() == 32 -#define PTREGS_OFFSET_REG(n) ((n)*4) -#else -#define PTREGS_OFFSET_REG(n) ((n)*8) -#endif -#define PTREGS_OFFSET_BASE 0 -#define PTREGS_OFFSET_TP PTREGS_OFFSET_REG(53) -#define PTREGS_OFFSET_SP PTREGS_OFFSET_REG(54) -#define PTREGS_OFFSET_LR PTREGS_OFFSET_REG(55) -#define PTREGS_NR_GPRS 56 -#define PTREGS_OFFSET_PC PTREGS_OFFSET_REG(56) -#define PTREGS_OFFSET_EX1 PTREGS_OFFSET_REG(57) -#define PTREGS_OFFSET_FAULTNUM PTREGS_OFFSET_REG(58) -#define PTREGS_OFFSET_ORIG_R0 PTREGS_OFFSET_REG(59) -#define PTREGS_OFFSET_FLAGS PTREGS_OFFSET_REG(60) -#if CHIP_HAS_CMPEXCH() -#define PTREGS_OFFSET_CMPEXCH PTREGS_OFFSET_REG(61) -#endif -#define PTREGS_SIZE PTREGS_OFFSET_REG(64) - - -#ifndef __ASSEMBLY__ - -#ifndef __KERNEL__ -/* Provide appropriate length type to userspace regardless of -m32/-m64. */ -typedef uint_reg_t pt_reg_t; -#endif - -/* - * This struct defines the way the registers are stored on the stack during a - * system call or exception. "struct sigcontext" has the same shape. - */ -struct pt_regs { - union { - /* Saved main processor registers; 56..63 are special. */ - pt_reg_t regs[56]; - struct { - pt_reg_t __regs[53]; - pt_reg_t tp; /* aliases regs[TREG_TP] */ - pt_reg_t sp; /* aliases regs[TREG_SP] */ - pt_reg_t lr; /* aliases regs[TREG_LR] */ - }; - }; - - /* Saved special registers. */ - pt_reg_t pc; /* stored in EX_CONTEXT_K_0 */ - pt_reg_t ex1; /* stored in EX_CONTEXT_K_1 (PL and ICS bit) */ - pt_reg_t faultnum; /* fault number (INT_SWINT_1 for syscall) */ - pt_reg_t orig_r0; /* r0 at syscall entry, else zero */ - pt_reg_t flags; /* flags (see below) */ -#if !CHIP_HAS_CMPEXCH() - pt_reg_t pad[3]; -#else - pt_reg_t cmpexch; /* value of CMPEXCH_VALUE SPR at interrupt */ - pt_reg_t pad[2]; -#endif -}; - -#endif /* __ASSEMBLY__ */ - -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 - -/* Support TILE-specific ptrace options, with events starting at 16. */ -#define PTRACE_EVENT_MIGRATE 16 -#define PTRACE_O_TRACEMIGRATE (1 << PTRACE_EVENT_MIGRATE) - -/* - * Flag bits in pt_regs.flags that are part of the ptrace API. - * We start our numbering higher up to avoid confusion with the - * non-ABI kernel-internal values that use the low 16 bits. - */ -#define PT_FLAGS_COMPAT 0x10000 /* process is an -m32 compat process */ - -#endif /* _UAPI_ASM_TILE_PTRACE_H */ diff --git a/arch/tile/include/uapi/asm/setup.h b/arch/tile/include/uapi/asm/setup.h deleted file mode 100644 index 6d1dfdddad6c..000000000000 --- a/arch/tile/include/uapi/asm/setup.h +++ /dev/null @@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _UAPI_ASM_TILE_SETUP_H -#define _UAPI_ASM_TILE_SETUP_H - -#define COMMAND_LINE_SIZE 2048 - - -#endif /* _UAPI_ASM_TILE_SETUP_H */ diff --git a/arch/tile/include/uapi/asm/sigcontext.h b/arch/tile/include/uapi/asm/sigcontext.h deleted file mode 100644 index 4003d5cc9202..000000000000 --- a/arch/tile/include/uapi/asm/sigcontext.h +++ /dev/null @@ -1,44 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_SIGCONTEXT_H -#define _ASM_TILE_SIGCONTEXT_H - -/* Don't pollute the namespace since <signal.h> includes this file. */ -#define __need_int_reg_t -#include <arch/abi.h> - -/* - * struct sigcontext has the same shape as struct pt_regs, - * but is simplified since we know the fault is from userspace. - */ -struct sigcontext { - __extension__ union { - /* General-purpose registers. */ - __uint_reg_t gregs[56]; - __extension__ struct { - __uint_reg_t __gregs[53]; - __uint_reg_t tp; /* Aliases gregs[TREG_TP]. */ - __uint_reg_t sp; /* Aliases gregs[TREG_SP]. */ - __uint_reg_t lr; /* Aliases gregs[TREG_LR]. */ - }; - }; - __uint_reg_t pc; /* Program counter. */ - __uint_reg_t ics; /* In Interrupt Critical Section? */ - __uint_reg_t faultnum; /* Fault number. */ - __uint_reg_t pad[5]; -}; - -#endif /* _ASM_TILE_SIGCONTEXT_H */ diff --git a/arch/tile/include/uapi/asm/siginfo.h b/arch/tile/include/uapi/asm/siginfo.h deleted file mode 100644 index a812fcbf4267..000000000000 --- a/arch/tile/include/uapi/asm/siginfo.h +++ /dev/null @@ -1,27 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_SIGINFO_H -#define _ASM_TILE_SIGINFO_H - -#define __ARCH_SI_TRAPNO - -#ifdef __LP64__ -# define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) -#endif - -#include <asm-generic/siginfo.h> - -#endif /* _ASM_TILE_SIGINFO_H */ diff --git a/arch/tile/include/uapi/asm/signal.h b/arch/tile/include/uapi/asm/signal.h deleted file mode 100644 index 7b3c814e00f0..000000000000 --- a/arch/tile/include/uapi/asm/signal.h +++ /dev/null @@ -1,28 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _UAPI_ASM_TILE_SIGNAL_H -#define _UAPI_ASM_TILE_SIGNAL_H - -/* Do not notify a ptracer when this signal is handled. */ -#define SA_NOPTRACE 0x02000000u - -/* Used in earlier Tilera releases, so keeping for binary compatibility. */ -#define SA_RESTORER 0x04000000u - -#include <asm-generic/signal.h> - - -#endif /* _UAPI_ASM_TILE_SIGNAL_H */ diff --git a/arch/tile/include/uapi/asm/stat.h b/arch/tile/include/uapi/asm/stat.h deleted file mode 100644 index ea03de7d67aa..000000000000 --- a/arch/tile/include/uapi/asm/stat.h +++ /dev/null @@ -1,5 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#if defined(__KERNEL__) && defined(CONFIG_COMPAT) -#define __ARCH_WANT_STAT64 /* Used for compat_sys_stat64() etc. */ -#endif -#include <asm-generic/stat.h> diff --git a/arch/tile/include/uapi/asm/swab.h b/arch/tile/include/uapi/asm/swab.h deleted file mode 100644 index 36952353a31d..000000000000 --- a/arch/tile/include/uapi/asm/swab.h +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_SWAB_H -#define _ASM_TILE_SWAB_H - -/* Tile gcc is always >= 4.3.0, so we use __builtin_bswap. */ -#define __arch_swab32(x) __builtin_bswap32(x) -#define __arch_swab64(x) __builtin_bswap64(x) -#define __arch_swab16(x) (__builtin_bswap32(x) >> 16) - -#endif /* _ASM_TILE_SWAB_H */ diff --git a/arch/tile/include/uapi/asm/unistd.h b/arch/tile/include/uapi/asm/unistd.h deleted file mode 100644 index 1a169ec92ef8..000000000000 --- a/arch/tile/include/uapi/asm/unistd.h +++ /dev/null @@ -1,38 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#define __ARCH_WANT_RENAMEAT -#if !defined(__LP64__) || defined(__SYSCALL_COMPAT) -/* Use the flavor of this syscall that matches the 32-bit API better. */ -#define __ARCH_WANT_SYNC_FILE_RANGE2 -#endif - -/* Use the standard ABI for syscalls. */ -#include <asm-generic/unistd.h> - -#define NR_syscalls __NR_syscalls - -/* Additional Tilera-specific syscalls. */ -#define __NR_cacheflush (__NR_arch_specific_syscall + 1) -__SYSCALL(__NR_cacheflush, sys_cacheflush) - -#ifndef __tilegx__ -/* "Fast" syscalls provide atomic support for 32-bit chips. */ -#define __NR_FAST_cmpxchg -1 -#define __NR_FAST_atomic_update -2 -#define __NR_FAST_cmpxchg64 -3 -#define __NR_cmpxchg_badaddr (__NR_arch_specific_syscall + 0) -__SYSCALL(__NR_cmpxchg_badaddr, sys_cmpxchg_badaddr) -#endif diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile deleted file mode 100644 index 3e43d78731a8..000000000000 --- a/arch/tile/kernel/Makefile +++ /dev/null @@ -1,38 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the Linux/TILE kernel. -# - -extra-y := vmlinux.lds head_$(BITS).o -obj-y := backtrace.o entry.o hvglue.o irq.o messaging.o \ - pci-dma.o proc.o process.o ptrace.o reboot.o \ - setup.o signal.o single_step.o stack.o sys.o \ - sysfs.o time.o traps.o unaligned.o vdso.o \ - intvec_$(BITS).o regs_$(BITS).o tile-desc_$(BITS).o - -ifdef CONFIG_FUNCTION_TRACER -CFLAGS_REMOVE_ftrace.o = -pg -CFLAGS_REMOVE_early_printk.o = -pg -endif - -obj-$(CONFIG_HARDWALL) += hardwall.o -obj-$(CONFIG_COMPAT) += compat.o compat_signal.o -obj-$(CONFIG_SMP) += smpboot.o smp.o tlb.o -obj-$(CONFIG_MODULES) += module.o -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel_$(BITS).o -ifdef CONFIG_TILEGX -obj-$(CONFIG_PCI) += pci_gx.o -else -obj-$(CONFIG_PCI) += pci.o -endif -obj-$(CONFIG_PERF_EVENTS) += perf_event.o -obj-$(CONFIG_USE_PMC) += pmc.o -obj-$(CONFIG_TILE_USB) += usb.o -obj-$(CONFIG_TILE_HVGLUE_TRACE) += hvglue_trace.o -obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o mcount_64.o -obj-$(CONFIG_KPROBES) += kprobes.o -obj-$(CONFIG_KGDB) += kgdb.o -obj-$(CONFIG_JUMP_LABEL) += jump_label.o - -obj-y += vdso/ diff --git a/arch/tile/kernel/asm-offsets.c b/arch/tile/kernel/asm-offsets.c deleted file mode 100644 index 375e7c321eef..000000000000 --- a/arch/tile/kernel/asm-offsets.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Generates definitions from c-type structures used by assembly sources. - */ - -/* Check for compatible compiler early in the build. */ -#ifdef CONFIG_TILEGX -# ifndef __tilegx__ -# error Can only build TILE-Gx configurations with tilegx compiler -# endif -# ifndef __LP64__ -# error Must not specify -m32 when building the TILE-Gx kernel -# endif -#else -# ifdef __tilegx__ -# error Can not build TILEPro configurations with tilegx compiler -# endif -#endif - -#include <linux/kbuild.h> -#include <linux/thread_info.h> -#include <linux/sched.h> -#include <linux/hardirq.h> -#include <linux/ptrace.h> -#include <hv/hypervisor.h> - -void foo(void) -{ - DEFINE(SINGLESTEP_STATE_BUFFER_OFFSET, - offsetof(struct single_step_state, buffer)); - DEFINE(SINGLESTEP_STATE_FLAGS_OFFSET, - offsetof(struct single_step_state, flags)); - DEFINE(SINGLESTEP_STATE_ORIG_PC_OFFSET, - offsetof(struct single_step_state, orig_pc)); - DEFINE(SINGLESTEP_STATE_NEXT_PC_OFFSET, - offsetof(struct single_step_state, next_pc)); - DEFINE(SINGLESTEP_STATE_BRANCH_NEXT_PC_OFFSET, - offsetof(struct single_step_state, branch_next_pc)); - DEFINE(SINGLESTEP_STATE_UPDATE_VALUE_OFFSET, - offsetof(struct single_step_state, update_value)); - - DEFINE(THREAD_INFO_TASK_OFFSET, - offsetof(struct thread_info, task)); - DEFINE(THREAD_INFO_FLAGS_OFFSET, - offsetof(struct thread_info, flags)); - DEFINE(THREAD_INFO_STATUS_OFFSET, - offsetof(struct thread_info, status)); - DEFINE(THREAD_INFO_HOMECACHE_CPU_OFFSET, - offsetof(struct thread_info, homecache_cpu)); - DEFINE(THREAD_INFO_PREEMPT_COUNT_OFFSET, - offsetof(struct thread_info, preempt_count)); - DEFINE(THREAD_INFO_STEP_STATE_OFFSET, - offsetof(struct thread_info, step_state)); -#ifdef __tilegx__ - DEFINE(THREAD_INFO_UNALIGN_JIT_BASE_OFFSET, - offsetof(struct thread_info, unalign_jit_base)); - DEFINE(THREAD_INFO_UNALIGN_JIT_TMP_OFFSET, - offsetof(struct thread_info, unalign_jit_tmp)); -#endif - - DEFINE(TASK_STRUCT_THREAD_KSP_OFFSET, - offsetof(struct task_struct, thread.ksp)); - DEFINE(TASK_STRUCT_THREAD_PC_OFFSET, - offsetof(struct task_struct, thread.pc)); - - DEFINE(HV_TOPOLOGY_WIDTH_OFFSET, - offsetof(HV_Topology, width)); - DEFINE(HV_TOPOLOGY_HEIGHT_OFFSET, - offsetof(HV_Topology, height)); - - DEFINE(IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET, - offsetof(irq_cpustat_t, irq_syscall_count)); -} diff --git a/arch/tile/kernel/backtrace.c b/arch/tile/kernel/backtrace.c deleted file mode 100644 index f8b74ca83b92..000000000000 --- a/arch/tile/kernel/backtrace.c +++ /dev/null @@ -1,683 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <asm/byteorder.h> -#include <asm/backtrace.h> -#include <asm/tile-desc.h> -#include <arch/abi.h> - -#ifdef __tilegx__ -#define TILE_MAX_INSTRUCTIONS_PER_BUNDLE TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE -#define tile_decoded_instruction tilegx_decoded_instruction -#define tile_mnemonic tilegx_mnemonic -#define parse_insn_tile parse_insn_tilegx -#define TILE_OPC_IRET TILEGX_OPC_IRET -#define TILE_OPC_ADDI TILEGX_OPC_ADDI -#define TILE_OPC_ADDLI TILEGX_OPC_ADDLI -#define TILE_OPC_INFO TILEGX_OPC_INFO -#define TILE_OPC_INFOL TILEGX_OPC_INFOL -#define TILE_OPC_JRP TILEGX_OPC_JRP -#define TILE_OPC_MOVE TILEGX_OPC_MOVE -#define OPCODE_STORE TILEGX_OPC_ST -typedef long long bt_int_reg_t; -#else -#define TILE_MAX_INSTRUCTIONS_PER_BUNDLE TILEPRO_MAX_INSTRUCTIONS_PER_BUNDLE -#define tile_decoded_instruction tilepro_decoded_instruction -#define tile_mnemonic tilepro_mnemonic -#define parse_insn_tile parse_insn_tilepro -#define TILE_OPC_IRET TILEPRO_OPC_IRET -#define TILE_OPC_ADDI TILEPRO_OPC_ADDI -#define TILE_OPC_ADDLI TILEPRO_OPC_ADDLI -#define TILE_OPC_INFO TILEPRO_OPC_INFO -#define TILE_OPC_INFOL TILEPRO_OPC_INFOL -#define TILE_OPC_JRP TILEPRO_OPC_JRP -#define TILE_OPC_MOVE TILEPRO_OPC_MOVE -#define OPCODE_STORE TILEPRO_OPC_SW -typedef int bt_int_reg_t; -#endif - -/* A decoded bundle used for backtracer analysis. */ -struct BacktraceBundle { - tile_bundle_bits bits; - int num_insns; - struct tile_decoded_instruction - insns[TILE_MAX_INSTRUCTIONS_PER_BUNDLE]; -}; - - -/* Locates an instruction inside the given bundle that - * has the specified mnemonic, and whose first 'num_operands_to_match' - * operands exactly match those in 'operand_values'. - */ -static const struct tile_decoded_instruction *find_matching_insn( - const struct BacktraceBundle *bundle, - tile_mnemonic mnemonic, - const int *operand_values, - int num_operands_to_match) -{ - int i, j; - bool match; - - for (i = 0; i < bundle->num_insns; i++) { - const struct tile_decoded_instruction *insn = - &bundle->insns[i]; - - if (insn->opcode->mnemonic != mnemonic) - continue; - - match = true; - for (j = 0; j < num_operands_to_match; j++) { - if (operand_values[j] != insn->operand_values[j]) { - match = false; - break; - } - } - - if (match) - return insn; - } - - return NULL; -} - -/* Does this bundle contain an 'iret' instruction? */ -static inline bool bt_has_iret(const struct BacktraceBundle *bundle) -{ - return find_matching_insn(bundle, TILE_OPC_IRET, NULL, 0) != NULL; -} - -/* Does this bundle contain an 'addi sp, sp, OFFSET' or - * 'addli sp, sp, OFFSET' instruction, and if so, what is OFFSET? - */ -static bool bt_has_addi_sp(const struct BacktraceBundle *bundle, int *adjust) -{ - static const int vals[2] = { TREG_SP, TREG_SP }; - - const struct tile_decoded_instruction *insn = - find_matching_insn(bundle, TILE_OPC_ADDI, vals, 2); - if (insn == NULL) - insn = find_matching_insn(bundle, TILE_OPC_ADDLI, vals, 2); -#ifdef __tilegx__ - if (insn == NULL) - insn = find_matching_insn(bundle, TILEGX_OPC_ADDXLI, vals, 2); - if (insn == NULL) - insn = find_matching_insn(bundle, TILEGX_OPC_ADDXI, vals, 2); -#endif - if (insn == NULL) - return false; - - *adjust = insn->operand_values[2]; - return true; -} - -/* Does this bundle contain any 'info OP' or 'infol OP' - * instruction, and if so, what are their OP? Note that OP is interpreted - * as an unsigned value by this code since that's what the caller wants. - * Returns the number of info ops found. - */ -static int bt_get_info_ops(const struct BacktraceBundle *bundle, - int operands[MAX_INFO_OPS_PER_BUNDLE]) -{ - int num_ops = 0; - int i; - - for (i = 0; i < bundle->num_insns; i++) { - const struct tile_decoded_instruction *insn = - &bundle->insns[i]; - - if (insn->opcode->mnemonic == TILE_OPC_INFO || - insn->opcode->mnemonic == TILE_OPC_INFOL) { - operands[num_ops++] = insn->operand_values[0]; - } - } - - return num_ops; -} - -/* Does this bundle contain a jrp instruction, and if so, to which - * register is it jumping? - */ -static bool bt_has_jrp(const struct BacktraceBundle *bundle, int *target_reg) -{ - const struct tile_decoded_instruction *insn = - find_matching_insn(bundle, TILE_OPC_JRP, NULL, 0); - if (insn == NULL) - return false; - - *target_reg = insn->operand_values[0]; - return true; -} - -/* Does this bundle modify the specified register in any way? */ -static bool bt_modifies_reg(const struct BacktraceBundle *bundle, int reg) -{ - int i, j; - for (i = 0; i < bundle->num_insns; i++) { - const struct tile_decoded_instruction *insn = - &bundle->insns[i]; - - if (insn->opcode->implicitly_written_register == reg) - return true; - - for (j = 0; j < insn->opcode->num_operands; j++) - if (insn->operands[j]->is_dest_reg && - insn->operand_values[j] == reg) - return true; - } - - return false; -} - -/* Does this bundle modify sp? */ -static inline bool bt_modifies_sp(const struct BacktraceBundle *bundle) -{ - return bt_modifies_reg(bundle, TREG_SP); -} - -/* Does this bundle modify lr? */ -static inline bool bt_modifies_lr(const struct BacktraceBundle *bundle) -{ - return bt_modifies_reg(bundle, TREG_LR); -} - -/* Does this bundle contain the instruction 'move fp, sp'? */ -static inline bool bt_has_move_r52_sp(const struct BacktraceBundle *bundle) -{ - static const int vals[2] = { 52, TREG_SP }; - return find_matching_insn(bundle, TILE_OPC_MOVE, vals, 2) != NULL; -} - -/* Does this bundle contain a store of lr to sp? */ -static inline bool bt_has_sw_sp_lr(const struct BacktraceBundle *bundle) -{ - static const int vals[2] = { TREG_SP, TREG_LR }; - return find_matching_insn(bundle, OPCODE_STORE, vals, 2) != NULL; -} - -#ifdef __tilegx__ -/* Track moveli values placed into registers. */ -static inline void bt_update_moveli(const struct BacktraceBundle *bundle, - int moveli_args[]) -{ - int i; - for (i = 0; i < bundle->num_insns; i++) { - const struct tile_decoded_instruction *insn = - &bundle->insns[i]; - - if (insn->opcode->mnemonic == TILEGX_OPC_MOVELI) { - int reg = insn->operand_values[0]; - moveli_args[reg] = insn->operand_values[1]; - } - } -} - -/* Does this bundle contain an 'add sp, sp, reg' instruction - * from a register that we saw a moveli into, and if so, what - * is the value in the register? - */ -static bool bt_has_add_sp(const struct BacktraceBundle *bundle, int *adjust, - int moveli_args[]) -{ - static const int vals[2] = { TREG_SP, TREG_SP }; - - const struct tile_decoded_instruction *insn = - find_matching_insn(bundle, TILEGX_OPC_ADDX, vals, 2); - if (insn) { - int reg = insn->operand_values[2]; - if (moveli_args[reg]) { - *adjust = moveli_args[reg]; - return true; - } - } - return false; -} -#endif - -/* Locates the caller's PC and SP for a program starting at the - * given address. - */ -static void find_caller_pc_and_caller_sp(CallerLocation *location, - const unsigned long start_pc, - BacktraceMemoryReader read_memory_func, - void *read_memory_func_extra) -{ - /* Have we explicitly decided what the sp is, - * rather than just the default? - */ - bool sp_determined = false; - - /* Has any bundle seen so far modified lr? */ - bool lr_modified = false; - - /* Have we seen a move from sp to fp? */ - bool sp_moved_to_r52 = false; - - /* Have we seen a terminating bundle? */ - bool seen_terminating_bundle = false; - - /* Cut down on round-trip reading overhead by reading several - * bundles at a time. - */ - tile_bundle_bits prefetched_bundles[32]; - int num_bundles_prefetched = 0; - int next_bundle = 0; - unsigned long pc; - -#ifdef __tilegx__ - /* Naively try to track moveli values to support addx for -m32. */ - int moveli_args[TILEGX_NUM_REGISTERS] = { 0 }; -#endif - - /* Default to assuming that the caller's sp is the current sp. - * This is necessary to handle the case where we start backtracing - * right at the end of the epilog. - */ - location->sp_location = SP_LOC_OFFSET; - location->sp_offset = 0; - - /* Default to having no idea where the caller PC is. */ - location->pc_location = PC_LOC_UNKNOWN; - - /* Don't even try if the PC is not aligned. */ - if (start_pc % TILE_BUNDLE_ALIGNMENT_IN_BYTES != 0) - return; - - for (pc = start_pc;; pc += sizeof(tile_bundle_bits)) { - - struct BacktraceBundle bundle; - int num_info_ops, info_operands[MAX_INFO_OPS_PER_BUNDLE]; - int one_ago, jrp_reg; - bool has_jrp; - - if (next_bundle >= num_bundles_prefetched) { - /* Prefetch some bytes, but don't cross a page - * boundary since that might cause a read failure we - * don't care about if we only need the first few - * bytes. Note: we don't care what the actual page - * size is; using the minimum possible page size will - * prevent any problems. - */ - unsigned int bytes_to_prefetch = 4096 - (pc & 4095); - if (bytes_to_prefetch > sizeof prefetched_bundles) - bytes_to_prefetch = sizeof prefetched_bundles; - - if (!read_memory_func(prefetched_bundles, pc, - bytes_to_prefetch, - read_memory_func_extra)) { - if (pc == start_pc) { - /* The program probably called a bad - * address, such as a NULL pointer. - * So treat this as if we are at the - * start of the function prolog so the - * backtrace will show how we got here. - */ - location->pc_location = PC_LOC_IN_LR; - return; - } - - /* Unreadable address. Give up. */ - break; - } - - next_bundle = 0; - num_bundles_prefetched = - bytes_to_prefetch / sizeof(tile_bundle_bits); - } - - /* - * Decode the next bundle. - * TILE always stores instruction bundles in little-endian - * mode, even when the chip is running in big-endian mode. - */ - bundle.bits = le64_to_cpu(prefetched_bundles[next_bundle++]); - bundle.num_insns = - parse_insn_tile(bundle.bits, pc, bundle.insns); - num_info_ops = bt_get_info_ops(&bundle, info_operands); - - /* First look at any one_ago info ops if they are interesting, - * since they should shadow any non-one-ago info ops. - */ - for (one_ago = (pc != start_pc) ? 1 : 0; - one_ago >= 0; one_ago--) { - int i; - for (i = 0; i < num_info_ops; i++) { - int info_operand = info_operands[i]; - if (info_operand < CALLER_UNKNOWN_BASE) { - /* Weird; reserved value, ignore it. */ - continue; - } - - /* Skip info ops which are not in the - * "one_ago" mode we want right now. - */ - if (((info_operand & ONE_BUNDLE_AGO_FLAG) != 0) - != (one_ago != 0)) - continue; - - /* Clear the flag to make later checking - * easier. */ - info_operand &= ~ONE_BUNDLE_AGO_FLAG; - - /* Default to looking at PC_IN_LR_FLAG. */ - if (info_operand & PC_IN_LR_FLAG) - location->pc_location = - PC_LOC_IN_LR; - else - location->pc_location = - PC_LOC_ON_STACK; - - switch (info_operand) { - case CALLER_UNKNOWN_BASE: - location->pc_location = PC_LOC_UNKNOWN; - location->sp_location = SP_LOC_UNKNOWN; - return; - - case CALLER_SP_IN_R52_BASE: - case CALLER_SP_IN_R52_BASE | PC_IN_LR_FLAG: - location->sp_location = SP_LOC_IN_R52; - return; - - default: - { - const unsigned int val = info_operand - - CALLER_SP_OFFSET_BASE; - const unsigned int sp_offset = - (val >> NUM_INFO_OP_FLAGS) * 8; - if (sp_offset < 32768) { - /* This is a properly encoded - * SP offset. */ - location->sp_location = - SP_LOC_OFFSET; - location->sp_offset = - sp_offset; - return; - } else { - /* This looked like an SP - * offset, but it's outside - * the legal range, so this - * must be an unrecognized - * info operand. Ignore it. - */ - } - } - break; - } - } - } - - if (seen_terminating_bundle) { - /* We saw a terminating bundle during the previous - * iteration, so we were only looking for an info op. - */ - break; - } - - if (bundle.bits == 0) { - /* Wacky terminating bundle. Stop looping, and hope - * we've already seen enough to find the caller. - */ - break; - } - - /* - * Try to determine caller's SP. - */ - - if (!sp_determined) { - int adjust; - if (bt_has_addi_sp(&bundle, &adjust) -#ifdef __tilegx__ - || bt_has_add_sp(&bundle, &adjust, moveli_args) -#endif - ) { - location->sp_location = SP_LOC_OFFSET; - - if (adjust <= 0) { - /* We are in prolog about to adjust - * SP. */ - location->sp_offset = 0; - } else { - /* We are in epilog restoring SP. */ - location->sp_offset = adjust; - } - - sp_determined = true; - } else { - if (bt_has_move_r52_sp(&bundle)) { - /* Maybe in prolog, creating an - * alloca-style frame. But maybe in - * the middle of a fixed-size frame - * clobbering r52 with SP. - */ - sp_moved_to_r52 = true; - } - - if (bt_modifies_sp(&bundle)) { - if (sp_moved_to_r52) { - /* We saw SP get saved into - * r52 earlier (or now), which - * must have been in the - * prolog, so we now know that - * SP is still holding the - * caller's sp value. - */ - location->sp_location = - SP_LOC_OFFSET; - location->sp_offset = 0; - } else { - /* Someone must have saved - * aside the caller's SP value - * into r52, so r52 holds the - * current value. - */ - location->sp_location = - SP_LOC_IN_R52; - } - sp_determined = true; - } - } - -#ifdef __tilegx__ - /* Track moveli arguments for -m32 mode. */ - bt_update_moveli(&bundle, moveli_args); -#endif - } - - if (bt_has_iret(&bundle)) { - /* This is a terminating bundle. */ - seen_terminating_bundle = true; - continue; - } - - /* - * Try to determine caller's PC. - */ - - jrp_reg = -1; - has_jrp = bt_has_jrp(&bundle, &jrp_reg); - if (has_jrp) - seen_terminating_bundle = true; - - if (location->pc_location == PC_LOC_UNKNOWN) { - if (has_jrp) { - if (jrp_reg == TREG_LR && !lr_modified) { - /* Looks like a leaf function, or else - * lr is already restored. */ - location->pc_location = - PC_LOC_IN_LR; - } else { - location->pc_location = - PC_LOC_ON_STACK; - } - } else if (bt_has_sw_sp_lr(&bundle)) { - /* In prolog, spilling initial lr to stack. */ - location->pc_location = PC_LOC_IN_LR; - } else if (bt_modifies_lr(&bundle)) { - lr_modified = true; - } - } - } -} - -/* Initializes a backtracer to start from the given location. - * - * If the frame pointer cannot be determined it is set to -1. - * - * state: The state to be filled in. - * read_memory_func: A callback that reads memory. - * read_memory_func_extra: An arbitrary argument to read_memory_func. - * pc: The current PC. - * lr: The current value of the 'lr' register. - * sp: The current value of the 'sp' register. - * r52: The current value of the 'r52' register. - */ -void backtrace_init(BacktraceIterator *state, - BacktraceMemoryReader read_memory_func, - void *read_memory_func_extra, - unsigned long pc, unsigned long lr, - unsigned long sp, unsigned long r52) -{ - CallerLocation location; - unsigned long fp, initial_frame_caller_pc; - - /* Find out where we are in the initial frame. */ - find_caller_pc_and_caller_sp(&location, pc, - read_memory_func, read_memory_func_extra); - - switch (location.sp_location) { - case SP_LOC_UNKNOWN: - /* Give up. */ - fp = -1; - break; - - case SP_LOC_IN_R52: - fp = r52; - break; - - case SP_LOC_OFFSET: - fp = sp + location.sp_offset; - break; - - default: - /* Give up. */ - fp = -1; - break; - } - - /* If the frame pointer is not aligned to the basic word size - * something terrible happened and we should mark it as invalid. - */ - if (fp % sizeof(bt_int_reg_t) != 0) - fp = -1; - - /* -1 means "don't know initial_frame_caller_pc". */ - initial_frame_caller_pc = -1; - - switch (location.pc_location) { - case PC_LOC_UNKNOWN: - /* Give up. */ - fp = -1; - break; - - case PC_LOC_IN_LR: - if (lr == 0 || lr % TILE_BUNDLE_ALIGNMENT_IN_BYTES != 0) { - /* Give up. */ - fp = -1; - } else { - initial_frame_caller_pc = lr; - } - break; - - case PC_LOC_ON_STACK: - /* Leave initial_frame_caller_pc as -1, - * meaning check the stack. - */ - break; - - default: - /* Give up. */ - fp = -1; - break; - } - - state->pc = pc; - state->sp = sp; - state->fp = fp; - state->initial_frame_caller_pc = initial_frame_caller_pc; - state->read_memory_func = read_memory_func; - state->read_memory_func_extra = read_memory_func_extra; -} - -/* Handle the case where the register holds more bits than the VA. */ -static bool valid_addr_reg(bt_int_reg_t reg) -{ - return ((unsigned long)reg == reg); -} - -/* Advances the backtracing state to the calling frame, returning - * true iff successful. - */ -bool backtrace_next(BacktraceIterator *state) -{ - unsigned long next_fp, next_pc; - bt_int_reg_t next_frame[2]; - - if (state->fp == -1) { - /* No parent frame. */ - return false; - } - - /* Try to read the frame linkage data chaining to the next function. */ - if (!state->read_memory_func(&next_frame, state->fp, sizeof next_frame, - state->read_memory_func_extra)) { - return false; - } - - next_fp = next_frame[1]; - if (!valid_addr_reg(next_frame[1]) || - next_fp % sizeof(bt_int_reg_t) != 0) { - /* Caller's frame pointer is suspect, so give up. */ - return false; - } - - if (state->initial_frame_caller_pc != -1) { - /* We must be in the initial stack frame and already know the - * caller PC. - */ - next_pc = state->initial_frame_caller_pc; - - /* Force reading stack next time, in case we were in the - * initial frame. We don't do this above just to paranoidly - * avoid changing the struct at all when we return false. - */ - state->initial_frame_caller_pc = -1; - } else { - /* Get the caller PC from the frame linkage area. */ - next_pc = next_frame[0]; - if (!valid_addr_reg(next_frame[0]) || next_pc == 0 || - next_pc % TILE_BUNDLE_ALIGNMENT_IN_BYTES != 0) { - /* The PC is suspect, so give up. */ - return false; - } - } - - /* Update state to become the caller's stack frame. */ - state->pc = next_pc; - state->sp = state->fp; - state->fp = next_fp; - - return true; -} diff --git a/arch/tile/kernel/compat.c b/arch/tile/kernel/compat.c deleted file mode 100644 index bdaf71d31a4a..000000000000 --- a/arch/tile/kernel/compat.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Adjust unistd.h to provide 32-bit numbers and functions. */ -#define __SYSCALL_COMPAT - -#include <linux/compat.h> -#include <linux/syscalls.h> -#include <linux/kdev_t.h> -#include <linux/fs.h> -#include <linux/fcntl.h> -#include <linux/uaccess.h> -#include <linux/signal.h> -#include <asm/syscalls.h> -#include <asm/byteorder.h> - -/* - * Syscalls that take 64-bit numbers traditionally take them in 32-bit - * "high" and "low" value parts on 32-bit architectures. - * In principle, one could imagine passing some register arguments as - * fully 64-bit on TILE-Gx in 32-bit mode, but it seems easier to - * adopt the usual convention. - */ - -#ifdef __BIG_ENDIAN -#define SYSCALL_PAIR(name) u32, name ## _hi, u32, name ## _lo -#else -#define SYSCALL_PAIR(name) u32, name ## _lo, u32, name ## _hi -#endif - -COMPAT_SYSCALL_DEFINE4(truncate64, char __user *, filename, u32, dummy, - SYSCALL_PAIR(length)) -{ - return sys_truncate(filename, ((loff_t)length_hi << 32) | length_lo); -} - -COMPAT_SYSCALL_DEFINE4(ftruncate64, unsigned int, fd, u32, dummy, - SYSCALL_PAIR(length)) -{ - return sys_ftruncate(fd, ((loff_t)length_hi << 32) | length_lo); -} - -COMPAT_SYSCALL_DEFINE6(pread64, unsigned int, fd, char __user *, ubuf, - size_t, count, u32, dummy, SYSCALL_PAIR(offset)) -{ - return sys_pread64(fd, ubuf, count, - ((loff_t)offset_hi << 32) | offset_lo); -} - -COMPAT_SYSCALL_DEFINE6(pwrite64, unsigned int, fd, char __user *, ubuf, - size_t, count, u32, dummy, SYSCALL_PAIR(offset)) -{ - return sys_pwrite64(fd, ubuf, count, - ((loff_t)offset_hi << 32) | offset_lo); -} - -COMPAT_SYSCALL_DEFINE6(sync_file_range2, int, fd, unsigned int, flags, - SYSCALL_PAIR(offset), SYSCALL_PAIR(nbytes)) -{ - return sys_sync_file_range(fd, ((loff_t)offset_hi << 32) | offset_lo, - ((loff_t)nbytes_hi << 32) | nbytes_lo, - flags); -} - -COMPAT_SYSCALL_DEFINE6(fallocate, int, fd, int, mode, - SYSCALL_PAIR(offset), SYSCALL_PAIR(len)) -{ - return sys_fallocate(fd, mode, ((loff_t)offset_hi << 32) | offset_lo, - ((loff_t)len_hi << 32) | len_lo); -} - -/* - * Avoid bug in generic sys_llseek() that specifies offset_high and - * offset_low as "unsigned long", thus making it possible to pass - * a sign-extended high 32 bits in offset_low. - * Note that we do not use SYSCALL_PAIR here since glibc passes the - * high and low parts explicitly in that order. - */ -COMPAT_SYSCALL_DEFINE5(llseek, unsigned int, fd, unsigned int, offset_high, - unsigned int, offset_low, loff_t __user *, result, - unsigned int, origin) -{ - return sys_llseek(fd, offset_high, offset_low, result, origin); -} - -/* Provide the compat syscall number to call mapping. */ -#undef __SYSCALL -#define __SYSCALL(nr, call) [nr] = (call), - -/* See comments in sys.c */ -#define compat_sys_fadvise64_64 sys32_fadvise64_64 -#define compat_sys_readahead sys32_readahead -#define sys_llseek compat_sys_llseek - -/* Call the assembly trampolines where necessary. */ -#define compat_sys_rt_sigreturn _compat_sys_rt_sigreturn -#define sys_clone _sys_clone - -/* - * Note that we can't include <linux/unistd.h> here since the header - * guard will defeat us; <asm/unistd.h> checks for __SYSCALL as well. - */ -void *compat_sys_call_table[__NR_syscalls] = { - [0 ... __NR_syscalls-1] = sys_ni_syscall, -#include <asm/unistd.h> -}; diff --git a/arch/tile/kernel/compat_signal.c b/arch/tile/kernel/compat_signal.c deleted file mode 100644 index a703bd0e0488..000000000000 --- a/arch/tile/kernel/compat_signal.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/sched.h> -#include <linux/sched/task_stack.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/errno.h> -#include <linux/wait.h> -#include <linux/unistd.h> -#include <linux/stddef.h> -#include <linux/personality.h> -#include <linux/suspend.h> -#include <linux/ptrace.h> -#include <linux/elf.h> -#include <linux/compat.h> -#include <linux/syscalls.h> -#include <linux/uaccess.h> -#include <asm/processor.h> -#include <asm/ucontext.h> -#include <asm/sigframe.h> -#include <asm/syscalls.h> -#include <asm/vdso.h> -#include <arch/interrupts.h> - -struct compat_ucontext { - compat_ulong_t uc_flags; - compat_uptr_t uc_link; - struct compat_sigaltstack uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -struct compat_rt_sigframe { - unsigned char save_area[C_ABI_SAVE_AREA_SIZE]; /* caller save area */ - struct compat_siginfo info; - struct compat_ucontext uc; -}; - -/* The assembly shim for this function arranges to ignore the return value. */ -long compat_sys_rt_sigreturn(void) -{ - struct pt_regs *regs = current_pt_regs(); - struct compat_rt_sigframe __user *frame = - (struct compat_rt_sigframe __user *) compat_ptr(regs->sp); - sigset_t set; - - if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) - goto badframe; - if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) - goto badframe; - - set_current_blocked(&set); - - if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) - goto badframe; - - if (compat_restore_altstack(&frame->uc.uc_stack)) - goto badframe; - - return 0; - -badframe: - signal_fault("bad sigreturn frame", regs, frame, 0); - return 0; -} - -/* - * Determine which stack to use.. - */ -static inline void __user *compat_get_sigframe(struct k_sigaction *ka, - struct pt_regs *regs, - size_t frame_size) -{ - unsigned long sp; - - /* Default to using normal stack */ - sp = (unsigned long)compat_ptr(regs->sp); - - /* - * If we are on the alternate signal stack and would overflow - * it, don't. Return an always-bogus address instead so we - * will die with SIGSEGV. - */ - if (on_sig_stack(sp) && !likely(on_sig_stack(sp - frame_size))) - return (void __user __force *)-1UL; - - /* This is the X/Open sanctioned signal stack switching. */ - if (ka->sa.sa_flags & SA_ONSTACK) { - if (sas_ss_flags(sp) == 0) - sp = current->sas_ss_sp + current->sas_ss_size; - } - - sp -= frame_size; - /* - * Align the stack pointer according to the TILE ABI, - * i.e. so that on function entry (sp & 15) == 0. - */ - sp &= -16UL; - return (void __user *) sp; -} - -int compat_setup_rt_frame(struct ksignal *ksig, sigset_t *set, - struct pt_regs *regs) -{ - unsigned long restorer; - struct compat_rt_sigframe __user *frame; - int err = 0, sig = ksig->sig; - - frame = compat_get_sigframe(&ksig->ka, regs, sizeof(*frame)); - - if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) - goto err; - - /* Always write at least the signal number for the stack backtracer. */ - if (ksig->ka.sa.sa_flags & SA_SIGINFO) { - /* At sigreturn time, restore the callee-save registers too. */ - err |= copy_siginfo_to_user32(&frame->info, &ksig->info); - regs->flags |= PT_FLAGS_RESTORE_REGS; - } else { - err |= __put_user(ksig->info.si_signo, &frame->info.si_signo); - } - - /* Create the ucontext. */ - err |= __clear_user(&frame->save_area, sizeof(frame->save_area)); - err |= __put_user(0, &frame->uc.uc_flags); - err |= __put_user(0, &frame->uc.uc_link); - err |= __compat_save_altstack(&frame->uc.uc_stack, regs->sp); - err |= setup_sigcontext(&frame->uc.uc_mcontext, regs); - err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); - if (err) - goto err; - - restorer = VDSO_SYM(&__vdso_rt_sigreturn); - if (ksig->ka.sa.sa_flags & SA_RESTORER) - restorer = ptr_to_compat_reg(ksig->ka.sa.sa_restorer); - - /* - * Set up registers for signal handler. - * Registers that we don't modify keep the value they had from - * user-space at the time we took the signal. - * We always pass siginfo and mcontext, regardless of SA_SIGINFO, - * since some things rely on this (e.g. glibc's debug/segfault.c). - */ - regs->pc = ptr_to_compat_reg(ksig->ka.sa.sa_handler); - regs->ex1 = PL_ICS_EX1(USER_PL, 1); /* set crit sec in handler */ - regs->sp = ptr_to_compat_reg(frame); - regs->lr = restorer; - regs->regs[0] = (unsigned long) sig; - regs->regs[1] = ptr_to_compat_reg(&frame->info); - regs->regs[2] = ptr_to_compat_reg(&frame->uc); - regs->flags |= PT_FLAGS_CALLER_SAVES; - return 0; - -err: - trace_unhandled_signal("bad sigreturn frame", regs, - (unsigned long)frame, SIGSEGV); - return -EFAULT; -} diff --git a/arch/tile/kernel/early_printk.c b/arch/tile/kernel/early_printk.c deleted file mode 100644 index aefb2c086726..000000000000 --- a/arch/tile/kernel/early_printk.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/console.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/irqflags.h> -#include <linux/printk.h> -#include <asm/setup.h> -#include <hv/hypervisor.h> - -static void early_hv_write(struct console *con, const char *s, unsigned n) -{ - tile_console_write(s, n); - - /* - * Convert NL to NLCR (close enough to CRNL) during early boot. - * We assume newlines are at the ends of strings, which turns out - * to be good enough for early boot console output. - */ - if (n && s[n-1] == '\n') - tile_console_write("\r", 1); -} - -static struct console early_hv_console = { - .name = "earlyhv", - .write = early_hv_write, - .flags = CON_PRINTBUFFER | CON_BOOT, - .index = -1, -}; - -void early_panic(const char *fmt, ...) -{ - struct va_format vaf; - va_list args; - - arch_local_irq_disable_all(); - - va_start(args, fmt); - - vaf.fmt = fmt; - vaf.va = &args; - - early_printk("Kernel panic - not syncing: %pV", &vaf); - - va_end(args); - - dump_stack(); - hv_halt(); -} - -static int __init setup_early_printk(char *str) -{ - if (early_console) - return 1; - - early_console = &early_hv_console; - register_console(early_console); - - return 0; -} - -early_param("earlyprintk", setup_early_printk); diff --git a/arch/tile/kernel/entry.S b/arch/tile/kernel/entry.S deleted file mode 100644 index 101de132e363..000000000000 --- a/arch/tile/kernel/entry.S +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/linkage.h> -#include <linux/unistd.h> -#include <asm/irqflags.h> -#include <asm/processor.h> -#include <arch/abi.h> -#include <arch/spr_def.h> - -#ifdef __tilegx__ -#define bnzt bnezt -#endif - -STD_ENTRY(current_text_addr) - { move r0, lr; jrp lr } - STD_ENDPROC(current_text_addr) - -STD_ENTRY(KBacktraceIterator_init_current) - { move r2, lr; lnk r1 } - { move r4, r52; addli r1, r1, KBacktraceIterator_init_current - . } - { move r3, sp; j _KBacktraceIterator_init_current } - jrp lr /* keep backtracer happy */ - STD_ENDPROC(KBacktraceIterator_init_current) - -/* Loop forever on a nap during SMP boot. */ -STD_ENTRY(smp_nap) - nap - nop /* avoid provoking the icache prefetch with a jump */ - j smp_nap /* we are not architecturally guaranteed not to exit nap */ - jrp lr /* clue in the backtracer */ - STD_ENDPROC(smp_nap) - -/* - * Enable interrupts racelessly and then nap until interrupted. - * Architecturally, we are guaranteed that enabling interrupts via - * mtspr to INTERRUPT_CRITICAL_SECTION only interrupts at the next PC. - * This function's _cpu_idle_nap address is special; see intvec.S. - * When interrupted at _cpu_idle_nap, we bump the PC forward 8, and - * as a result return to the function that called _cpu_idle(). - */ -STD_ENTRY_SECTION(_cpu_idle, .cpuidle.text) - movei r1, 1 - IRQ_ENABLE_LOAD(r2, r3) - mtspr INTERRUPT_CRITICAL_SECTION, r1 - IRQ_ENABLE_APPLY(r2, r3) /* unmask, but still with ICS set */ - mtspr INTERRUPT_CRITICAL_SECTION, zero - .global _cpu_idle_nap -_cpu_idle_nap: - nap - nop /* avoid provoking the icache prefetch with a jump */ - jrp lr - STD_ENDPROC(_cpu_idle) diff --git a/arch/tile/kernel/ftrace.c b/arch/tile/kernel/ftrace.c deleted file mode 100644 index b827a418b155..000000000000 --- a/arch/tile/kernel/ftrace.c +++ /dev/null @@ -1,239 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * TILE-Gx specific ftrace support - */ - -#include <linux/ftrace.h> -#include <linux/uaccess.h> - -#include <asm/cacheflush.h> -#include <asm/ftrace.h> -#include <asm/sections.h> -#include <asm/insn.h> - -#include <arch/opcode.h> - -#ifdef CONFIG_DYNAMIC_FTRACE - -static int machine_stopped __read_mostly; - -int ftrace_arch_code_modify_prepare(void) -{ - machine_stopped = 1; - return 0; -} - -int ftrace_arch_code_modify_post_process(void) -{ - flush_icache_range(0, CHIP_L1I_CACHE_SIZE()); - machine_stopped = 0; - return 0; -} - -/* - * Put { move r10, lr; jal ftrace_caller } in a bundle, this lets dynamic - * tracer just add one cycle overhead to every kernel function when disabled. - */ -static unsigned long ftrace_gen_branch(unsigned long pc, unsigned long addr, - bool link) -{ - tilegx_bundle_bits opcode_x0, opcode_x1; - long pcrel_by_instr = (addr - pc) >> TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES; - - if (link) { - /* opcode: jal addr */ - opcode_x1 = - create_Opcode_X1(JUMP_OPCODE_X1) | - create_JumpOpcodeExtension_X1(JAL_JUMP_OPCODE_X1) | - create_JumpOff_X1(pcrel_by_instr); - } else { - /* opcode: j addr */ - opcode_x1 = - create_Opcode_X1(JUMP_OPCODE_X1) | - create_JumpOpcodeExtension_X1(J_JUMP_OPCODE_X1) | - create_JumpOff_X1(pcrel_by_instr); - } - - /* - * Also put { move r10, lr; jal ftrace_stub } in a bundle, which - * is used to replace the instruction in address ftrace_call. - */ - if (addr == FTRACE_ADDR || addr == (unsigned long)ftrace_stub) { - /* opcode: or r10, lr, zero */ - opcode_x0 = - create_Dest_X0(10) | - create_SrcA_X0(TREG_LR) | - create_SrcB_X0(TREG_ZERO) | - create_RRROpcodeExtension_X0(OR_RRR_0_OPCODE_X0) | - create_Opcode_X0(RRR_0_OPCODE_X0); - } else { - /* opcode: fnop */ - opcode_x0 = - create_UnaryOpcodeExtension_X0(FNOP_UNARY_OPCODE_X0) | - create_RRROpcodeExtension_X0(UNARY_RRR_0_OPCODE_X0) | - create_Opcode_X0(RRR_0_OPCODE_X0); - } - - return opcode_x1 | opcode_x0; -} - -static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec) -{ - return NOP(); -} - -static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) -{ - return ftrace_gen_branch(pc, addr, true); -} - -static int ftrace_modify_code(unsigned long pc, unsigned long old, - unsigned long new) -{ - unsigned long pc_wr; - - /* Check if the address is in kernel text space and module space. */ - if (!kernel_text_address(pc)) - return -EINVAL; - - /* Operate on writable kernel text mapping. */ - pc_wr = ktext_writable_addr(pc); - - if (probe_kernel_write((void *)pc_wr, &new, MCOUNT_INSN_SIZE)) - return -EPERM; - - smp_wmb(); - - if (!machine_stopped && num_online_cpus() > 1) - flush_icache_range(pc, pc + MCOUNT_INSN_SIZE); - - return 0; -} - -int ftrace_update_ftrace_func(ftrace_func_t func) -{ - unsigned long pc, old; - unsigned long new; - int ret; - - pc = (unsigned long)&ftrace_call; - memcpy(&old, &ftrace_call, MCOUNT_INSN_SIZE); - new = ftrace_call_replace(pc, (unsigned long)func); - - ret = ftrace_modify_code(pc, old, new); - - return ret; -} - -int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) -{ - unsigned long new, old; - unsigned long ip = rec->ip; - - old = ftrace_nop_replace(rec); - new = ftrace_call_replace(ip, addr); - - return ftrace_modify_code(rec->ip, old, new); -} - -int ftrace_make_nop(struct module *mod, - struct dyn_ftrace *rec, unsigned long addr) -{ - unsigned long ip = rec->ip; - unsigned long old; - unsigned long new; - int ret; - - old = ftrace_call_replace(ip, addr); - new = ftrace_nop_replace(rec); - ret = ftrace_modify_code(ip, old, new); - - return ret; -} - -int __init ftrace_dyn_arch_init(void) -{ - return 0; -} -#endif /* CONFIG_DYNAMIC_FTRACE */ - -#ifdef CONFIG_FUNCTION_GRAPH_TRACER -void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, - unsigned long frame_pointer) -{ - unsigned long return_hooker = (unsigned long) &return_to_handler; - struct ftrace_graph_ent trace; - unsigned long old; - int err; - - if (unlikely(atomic_read(¤t->tracing_graph_pause))) - return; - - old = *parent; - *parent = return_hooker; - - err = ftrace_push_return_trace(old, self_addr, &trace.depth, - frame_pointer, NULL); - if (err == -EBUSY) { - *parent = old; - return; - } - - trace.func = self_addr; - - /* Only trace if the calling function expects to */ - if (!ftrace_graph_entry(&trace)) { - current->curr_ret_stack--; - *parent = old; - } -} - -#ifdef CONFIG_DYNAMIC_FTRACE -extern unsigned long ftrace_graph_call; - -static int __ftrace_modify_caller(unsigned long *callsite, - void (*func) (void), bool enable) -{ - unsigned long caller_fn = (unsigned long) func; - unsigned long pc = (unsigned long) callsite; - unsigned long branch = ftrace_gen_branch(pc, caller_fn, false); - unsigned long nop = NOP(); - unsigned long old = enable ? nop : branch; - unsigned long new = enable ? branch : nop; - - return ftrace_modify_code(pc, old, new); -} - -static int ftrace_modify_graph_caller(bool enable) -{ - int ret; - - ret = __ftrace_modify_caller(&ftrace_graph_call, - ftrace_graph_caller, - enable); - - return ret; -} - -int ftrace_enable_ftrace_graph_caller(void) -{ - return ftrace_modify_graph_caller(true); -} - -int ftrace_disable_ftrace_graph_caller(void) -{ - return ftrace_modify_graph_caller(false); -} -#endif /* CONFIG_DYNAMIC_FTRACE */ -#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ diff --git a/arch/tile/kernel/hardwall.c b/arch/tile/kernel/hardwall.c deleted file mode 100644 index 2fd1694ac1d0..000000000000 --- a/arch/tile/kernel/hardwall.c +++ /dev/null @@ -1,1096 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/fs.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/rwsem.h> -#include <linux/kprobes.h> -#include <linux/sched.h> -#include <linux/hardirq.h> -#include <linux/uaccess.h> -#include <linux/smp.h> -#include <linux/cdev.h> -#include <linux/compat.h> -#include <asm/hardwall.h> -#include <asm/traps.h> -#include <asm/siginfo.h> -#include <asm/irq_regs.h> - -#include <arch/interrupts.h> -#include <arch/spr_def.h> - - -/* - * Implement a per-cpu "hardwall" resource class such as UDN or IPI. - * We use "hardwall" nomenclature throughout for historical reasons. - * The lock here controls access to the list data structure as well as - * to the items on the list. - */ -struct hardwall_type { - int index; - int is_xdn; - int is_idn; - int disabled; - const char *name; - struct list_head list; - spinlock_t lock; - struct proc_dir_entry *proc_dir; -}; - -enum hardwall_index { - HARDWALL_UDN = 0, -#ifndef __tilepro__ - HARDWALL_IDN = 1, - HARDWALL_IPI = 2, -#endif - _HARDWALL_TYPES -}; - -static struct hardwall_type hardwall_types[] = { - { /* user-space access to UDN */ - 0, - 1, - 0, - 0, - "udn", - LIST_HEAD_INIT(hardwall_types[HARDWALL_UDN].list), - __SPIN_LOCK_UNLOCKED(hardwall_types[HARDWALL_UDN].lock), - NULL - }, -#ifndef __tilepro__ - { /* user-space access to IDN */ - 1, - 1, - 1, - 1, /* disabled pending hypervisor support */ - "idn", - LIST_HEAD_INIT(hardwall_types[HARDWALL_IDN].list), - __SPIN_LOCK_UNLOCKED(hardwall_types[HARDWALL_IDN].lock), - NULL - }, - { /* access to user-space IPI */ - 2, - 0, - 0, - 0, - "ipi", - LIST_HEAD_INIT(hardwall_types[HARDWALL_IPI].list), - __SPIN_LOCK_UNLOCKED(hardwall_types[HARDWALL_IPI].lock), - NULL - }, -#endif -}; - -/* - * This data structure tracks the cpu data, etc., associated - * one-to-one with a "struct file *" from opening a hardwall device file. - * Note that the file's private data points back to this structure. - */ -struct hardwall_info { - struct list_head list; /* for hardwall_types.list */ - struct list_head task_head; /* head of tasks in this hardwall */ - struct hardwall_type *type; /* type of this resource */ - struct cpumask cpumask; /* cpus reserved */ - int id; /* integer id for this hardwall */ - int teardown_in_progress; /* are we tearing this one down? */ - - /* Remaining fields only valid for user-network resources. */ - int ulhc_x; /* upper left hand corner x coord */ - int ulhc_y; /* upper left hand corner y coord */ - int width; /* rectangle width */ - int height; /* rectangle height */ -#if CHIP_HAS_REV1_XDN() - atomic_t xdn_pending_count; /* cores in phase 1 of drain */ -#endif -}; - - -/* /proc/tile/hardwall */ -static struct proc_dir_entry *hardwall_proc_dir; - -/* Functions to manage files in /proc/tile/hardwall. */ -static void hardwall_add_proc(struct hardwall_info *); -static void hardwall_remove_proc(struct hardwall_info *); - -/* Allow disabling UDN access. */ -static int __init noudn(char *str) -{ - pr_info("User-space UDN access is disabled\n"); - hardwall_types[HARDWALL_UDN].disabled = 1; - return 0; -} -early_param("noudn", noudn); - -#ifndef __tilepro__ -/* Allow disabling IDN access. */ -static int __init noidn(char *str) -{ - pr_info("User-space IDN access is disabled\n"); - hardwall_types[HARDWALL_IDN].disabled = 1; - return 0; -} -early_param("noidn", noidn); - -/* Allow disabling IPI access. */ -static int __init noipi(char *str) -{ - pr_info("User-space IPI access is disabled\n"); - hardwall_types[HARDWALL_IPI].disabled = 1; - return 0; -} -early_param("noipi", noipi); -#endif - - -/* - * Low-level primitives for UDN/IDN - */ - -#ifdef __tilepro__ -#define mtspr_XDN(hwt, name, val) \ - do { (void)(hwt); __insn_mtspr(SPR_UDN_##name, (val)); } while (0) -#define mtspr_MPL_XDN(hwt, name, val) \ - do { (void)(hwt); __insn_mtspr(SPR_MPL_UDN_##name, (val)); } while (0) -#define mfspr_XDN(hwt, name) \ - ((void)(hwt), __insn_mfspr(SPR_UDN_##name)) -#else -#define mtspr_XDN(hwt, name, val) \ - do { \ - if ((hwt)->is_idn) \ - __insn_mtspr(SPR_IDN_##name, (val)); \ - else \ - __insn_mtspr(SPR_UDN_##name, (val)); \ - } while (0) -#define mtspr_MPL_XDN(hwt, name, val) \ - do { \ - if ((hwt)->is_idn) \ - __insn_mtspr(SPR_MPL_IDN_##name, (val)); \ - else \ - __insn_mtspr(SPR_MPL_UDN_##name, (val)); \ - } while (0) -#define mfspr_XDN(hwt, name) \ - ((hwt)->is_idn ? __insn_mfspr(SPR_IDN_##name) : __insn_mfspr(SPR_UDN_##name)) -#endif - -/* Set a CPU bit if the CPU is online. */ -#define cpu_online_set(cpu, dst) do { \ - if (cpu_online(cpu)) \ - cpumask_set_cpu(cpu, dst); \ -} while (0) - - -/* Does the given rectangle contain the given x,y coordinate? */ -static int contains(struct hardwall_info *r, int x, int y) -{ - return (x >= r->ulhc_x && x < r->ulhc_x + r->width) && - (y >= r->ulhc_y && y < r->ulhc_y + r->height); -} - -/* Compute the rectangle parameters and validate the cpumask. */ -static int check_rectangle(struct hardwall_info *r, struct cpumask *mask) -{ - int x, y, cpu, ulhc, lrhc; - - /* The first cpu is the ULHC, the last the LRHC. */ - ulhc = find_first_bit(cpumask_bits(mask), nr_cpumask_bits); - lrhc = find_last_bit(cpumask_bits(mask), nr_cpumask_bits); - - /* Compute the rectangle attributes from the cpus. */ - r->ulhc_x = cpu_x(ulhc); - r->ulhc_y = cpu_y(ulhc); - r->width = cpu_x(lrhc) - r->ulhc_x + 1; - r->height = cpu_y(lrhc) - r->ulhc_y + 1; - - /* Width and height must be positive */ - if (r->width <= 0 || r->height <= 0) - return -EINVAL; - - /* Confirm that the cpumask is exactly the rectangle. */ - for (y = 0, cpu = 0; y < smp_height; ++y) - for (x = 0; x < smp_width; ++x, ++cpu) - if (cpumask_test_cpu(cpu, mask) != contains(r, x, y)) - return -EINVAL; - - /* - * Note that offline cpus can't be drained when this user network - * rectangle eventually closes. We used to detect this - * situation and print a warning, but it annoyed users and - * they ignored it anyway, so now we just return without a - * warning. - */ - return 0; -} - -/* - * Hardware management of hardwall setup, teardown, trapping, - * and enabling/disabling PL0 access to the networks. - */ - -/* Bit field values to mask together for writes to SPR_XDN_DIRECTION_PROTECT */ -enum direction_protect { - N_PROTECT = (1 << 0), - E_PROTECT = (1 << 1), - S_PROTECT = (1 << 2), - W_PROTECT = (1 << 3), - C_PROTECT = (1 << 4), -}; - -static inline int xdn_which_interrupt(struct hardwall_type *hwt) -{ -#ifndef __tilepro__ - if (hwt->is_idn) - return INT_IDN_FIREWALL; -#endif - return INT_UDN_FIREWALL; -} - -static void enable_firewall_interrupts(struct hardwall_type *hwt) -{ - arch_local_irq_unmask_now(xdn_which_interrupt(hwt)); -} - -static void disable_firewall_interrupts(struct hardwall_type *hwt) -{ - arch_local_irq_mask_now(xdn_which_interrupt(hwt)); -} - -/* Set up hardwall on this cpu based on the passed hardwall_info. */ -static void hardwall_setup_func(void *info) -{ - struct hardwall_info *r = info; - struct hardwall_type *hwt = r->type; - - int cpu = smp_processor_id(); /* on_each_cpu disables preemption */ - int x = cpu_x(cpu); - int y = cpu_y(cpu); - int bits = 0; - if (x == r->ulhc_x) - bits |= W_PROTECT; - if (x == r->ulhc_x + r->width - 1) - bits |= E_PROTECT; - if (y == r->ulhc_y) - bits |= N_PROTECT; - if (y == r->ulhc_y + r->height - 1) - bits |= S_PROTECT; - BUG_ON(bits == 0); - mtspr_XDN(hwt, DIRECTION_PROTECT, bits); - enable_firewall_interrupts(hwt); -} - -/* Set up all cpus on edge of rectangle to enable/disable hardwall SPRs. */ -static void hardwall_protect_rectangle(struct hardwall_info *r) -{ - int x, y, cpu, delta; - struct cpumask rect_cpus; - - cpumask_clear(&rect_cpus); - - /* First include the top and bottom edges */ - cpu = r->ulhc_y * smp_width + r->ulhc_x; - delta = (r->height - 1) * smp_width; - for (x = 0; x < r->width; ++x, ++cpu) { - cpu_online_set(cpu, &rect_cpus); - cpu_online_set(cpu + delta, &rect_cpus); - } - - /* Then the left and right edges */ - cpu -= r->width; - delta = r->width - 1; - for (y = 0; y < r->height; ++y, cpu += smp_width) { - cpu_online_set(cpu, &rect_cpus); - cpu_online_set(cpu + delta, &rect_cpus); - } - - /* Then tell all the cpus to set up their protection SPR */ - on_each_cpu_mask(&rect_cpus, hardwall_setup_func, r, 1); -} - -/* Entered from INT_xDN_FIREWALL interrupt vector with irqs disabled. */ -void __kprobes do_hardwall_trap(struct pt_regs* regs, int fault_num) -{ - struct hardwall_info *rect; - struct hardwall_type *hwt; - struct task_struct *p; - struct siginfo info; - int cpu = smp_processor_id(); - int found_processes; - struct pt_regs *old_regs = set_irq_regs(regs); - - irq_enter(); - - /* Figure out which network trapped. */ - switch (fault_num) { -#ifndef __tilepro__ - case INT_IDN_FIREWALL: - hwt = &hardwall_types[HARDWALL_IDN]; - break; -#endif - case INT_UDN_FIREWALL: - hwt = &hardwall_types[HARDWALL_UDN]; - break; - default: - BUG(); - } - BUG_ON(hwt->disabled); - - /* This tile trapped a network access; find the rectangle. */ - spin_lock(&hwt->lock); - list_for_each_entry(rect, &hwt->list, list) { - if (cpumask_test_cpu(cpu, &rect->cpumask)) - break; - } - - /* - * It shouldn't be possible not to find this cpu on the - * rectangle list, since only cpus in rectangles get hardwalled. - * The hardwall is only removed after the user network is drained. - */ - BUG_ON(&rect->list == &hwt->list); - - /* - * If we already started teardown on this hardwall, don't worry; - * the abort signal has been sent and we are just waiting for things - * to quiesce. - */ - if (rect->teardown_in_progress) { - pr_notice("cpu %d: detected %s hardwall violation %#lx while teardown already in progress\n", - cpu, hwt->name, - (long)mfspr_XDN(hwt, DIRECTION_PROTECT)); - goto done; - } - - /* - * Kill off any process that is activated in this rectangle. - * We bypass security to deliver the signal, since it must be - * one of the activated processes that generated the user network - * message that caused this trap, and all the activated - * processes shared a single open file so are pretty tightly - * bound together from a security point of view to begin with. - */ - rect->teardown_in_progress = 1; - wmb(); /* Ensure visibility of rectangle before notifying processes. */ - pr_notice("cpu %d: detected %s hardwall violation %#lx...\n", - cpu, hwt->name, (long)mfspr_XDN(hwt, DIRECTION_PROTECT)); - info.si_signo = SIGILL; - info.si_errno = 0; - info.si_code = ILL_HARDWALL; - found_processes = 0; - list_for_each_entry(p, &rect->task_head, - thread.hardwall[hwt->index].list) { - BUG_ON(p->thread.hardwall[hwt->index].info != rect); - if (!(p->flags & PF_EXITING)) { - found_processes = 1; - pr_notice("hardwall: killing %d\n", p->pid); - do_send_sig_info(info.si_signo, &info, p, false); - } - } - if (!found_processes) - pr_notice("hardwall: no associated processes!\n"); - - done: - spin_unlock(&hwt->lock); - - /* - * We have to disable firewall interrupts now, or else when we - * return from this handler, we will simply re-interrupt back to - * it. However, we can't clear the protection bits, since we - * haven't yet drained the network, and that would allow packets - * to cross out of the hardwall region. - */ - disable_firewall_interrupts(hwt); - - irq_exit(); - set_irq_regs(old_regs); -} - -/* Allow access from user space to the user network. */ -void grant_hardwall_mpls(struct hardwall_type *hwt) -{ -#ifndef __tilepro__ - if (!hwt->is_xdn) { - __insn_mtspr(SPR_MPL_IPI_0_SET_0, 1); - return; - } -#endif - mtspr_MPL_XDN(hwt, ACCESS_SET_0, 1); - mtspr_MPL_XDN(hwt, AVAIL_SET_0, 1); - mtspr_MPL_XDN(hwt, COMPLETE_SET_0, 1); - mtspr_MPL_XDN(hwt, TIMER_SET_0, 1); -#if !CHIP_HAS_REV1_XDN() - mtspr_MPL_XDN(hwt, REFILL_SET_0, 1); - mtspr_MPL_XDN(hwt, CA_SET_0, 1); -#endif -} - -/* Deny access from user space to the user network. */ -void restrict_hardwall_mpls(struct hardwall_type *hwt) -{ -#ifndef __tilepro__ - if (!hwt->is_xdn) { - __insn_mtspr(SPR_MPL_IPI_0_SET_1, 1); - return; - } -#endif - mtspr_MPL_XDN(hwt, ACCESS_SET_1, 1); - mtspr_MPL_XDN(hwt, AVAIL_SET_1, 1); - mtspr_MPL_XDN(hwt, COMPLETE_SET_1, 1); - mtspr_MPL_XDN(hwt, TIMER_SET_1, 1); -#if !CHIP_HAS_REV1_XDN() - mtspr_MPL_XDN(hwt, REFILL_SET_1, 1); - mtspr_MPL_XDN(hwt, CA_SET_1, 1); -#endif -} - -/* Restrict or deny as necessary for the task we're switching to. */ -void hardwall_switch_tasks(struct task_struct *prev, - struct task_struct *next) -{ - int i; - for (i = 0; i < HARDWALL_TYPES; ++i) { - if (prev->thread.hardwall[i].info != NULL) { - if (next->thread.hardwall[i].info == NULL) - restrict_hardwall_mpls(&hardwall_types[i]); - } else if (next->thread.hardwall[i].info != NULL) { - grant_hardwall_mpls(&hardwall_types[i]); - } - } -} - -/* Does this task have the right to IPI the given cpu? */ -int hardwall_ipi_valid(int cpu) -{ -#ifdef __tilegx__ - struct hardwall_info *info = - current->thread.hardwall[HARDWALL_IPI].info; - return info && cpumask_test_cpu(cpu, &info->cpumask); -#else - return 0; -#endif -} - -/* - * Code to create, activate, deactivate, and destroy hardwall resources. - */ - -/* Create a hardwall for the given resource */ -static struct hardwall_info *hardwall_create(struct hardwall_type *hwt, - size_t size, - const unsigned char __user *bits) -{ - struct hardwall_info *iter, *info; - struct cpumask mask; - unsigned long flags; - int rc; - - /* Reject crazy sizes out of hand, a la sys_mbind(). */ - if (size > PAGE_SIZE) - return ERR_PTR(-EINVAL); - - /* Copy whatever fits into a cpumask. */ - if (copy_from_user(&mask, bits, min(sizeof(struct cpumask), size))) - return ERR_PTR(-EFAULT); - - /* - * If the size was short, clear the rest of the mask; - * otherwise validate that the rest of the user mask was zero - * (we don't try hard to be efficient when validating huge masks). - */ - if (size < sizeof(struct cpumask)) { - memset((char *)&mask + size, 0, sizeof(struct cpumask) - size); - } else if (size > sizeof(struct cpumask)) { - size_t i; - for (i = sizeof(struct cpumask); i < size; ++i) { - char c; - if (get_user(c, &bits[i])) - return ERR_PTR(-EFAULT); - if (c) - return ERR_PTR(-EINVAL); - } - } - - /* Allocate a new hardwall_info optimistically. */ - info = kmalloc(sizeof(struct hardwall_info), - GFP_KERNEL | __GFP_ZERO); - if (info == NULL) - return ERR_PTR(-ENOMEM); - INIT_LIST_HEAD(&info->task_head); - info->type = hwt; - - /* Compute the rectangle size and validate that it's plausible. */ - cpumask_copy(&info->cpumask, &mask); - info->id = find_first_bit(cpumask_bits(&mask), nr_cpumask_bits); - if (hwt->is_xdn) { - rc = check_rectangle(info, &mask); - if (rc != 0) { - kfree(info); - return ERR_PTR(rc); - } - } - - /* - * Eliminate cpus that are not part of this Linux client. - * Note that this allows for configurations that we might not want to - * support, such as one client on every even cpu, another client on - * every odd cpu. - */ - cpumask_and(&info->cpumask, &info->cpumask, cpu_online_mask); - - /* Confirm it doesn't overlap and add it to the list. */ - spin_lock_irqsave(&hwt->lock, flags); - list_for_each_entry(iter, &hwt->list, list) { - if (cpumask_intersects(&iter->cpumask, &info->cpumask)) { - spin_unlock_irqrestore(&hwt->lock, flags); - kfree(info); - return ERR_PTR(-EBUSY); - } - } - list_add_tail(&info->list, &hwt->list); - spin_unlock_irqrestore(&hwt->lock, flags); - - /* Set up appropriate hardwalling on all affected cpus. */ - if (hwt->is_xdn) - hardwall_protect_rectangle(info); - - /* Create a /proc/tile/hardwall entry. */ - hardwall_add_proc(info); - - return info; -} - -/* Activate a given hardwall on this cpu for this process. */ -static int hardwall_activate(struct hardwall_info *info) -{ - int cpu; - unsigned long flags; - struct task_struct *p = current; - struct thread_struct *ts = &p->thread; - struct hardwall_type *hwt; - - /* Require a hardwall. */ - if (info == NULL) - return -ENODATA; - - /* Not allowed to activate a hardwall that is being torn down. */ - if (info->teardown_in_progress) - return -EINVAL; - - /* - * Get our affinity; if we're not bound to this tile uniquely, - * we can't access the network registers. - */ - if (cpumask_weight(&p->cpus_allowed) != 1) - return -EPERM; - - /* Make sure we are bound to a cpu assigned to this resource. */ - cpu = smp_processor_id(); - BUG_ON(cpumask_first(&p->cpus_allowed) != cpu); - if (!cpumask_test_cpu(cpu, &info->cpumask)) - return -EINVAL; - - /* If we are already bound to this hardwall, it's a no-op. */ - hwt = info->type; - if (ts->hardwall[hwt->index].info) { - BUG_ON(ts->hardwall[hwt->index].info != info); - return 0; - } - - /* Success! This process gets to use the resource on this cpu. */ - ts->hardwall[hwt->index].info = info; - spin_lock_irqsave(&hwt->lock, flags); - list_add(&ts->hardwall[hwt->index].list, &info->task_head); - spin_unlock_irqrestore(&hwt->lock, flags); - grant_hardwall_mpls(hwt); - printk(KERN_DEBUG "Pid %d (%s) activated for %s hardwall: cpu %d\n", - p->pid, p->comm, hwt->name, cpu); - return 0; -} - -/* - * Deactivate a task's hardwall. Must hold lock for hardwall_type. - * This method may be called from exit_thread(), so we don't want to - * rely on too many fields of struct task_struct still being valid. - * We assume the cpus_allowed, pid, and comm fields are still valid. - */ -static void _hardwall_deactivate(struct hardwall_type *hwt, - struct task_struct *task) -{ - struct thread_struct *ts = &task->thread; - - if (cpumask_weight(&task->cpus_allowed) != 1) { - pr_err("pid %d (%s) releasing %s hardwall with an affinity mask containing %d cpus!\n", - task->pid, task->comm, hwt->name, - cpumask_weight(&task->cpus_allowed)); - BUG(); - } - - BUG_ON(ts->hardwall[hwt->index].info == NULL); - ts->hardwall[hwt->index].info = NULL; - list_del(&ts->hardwall[hwt->index].list); - if (task == current) - restrict_hardwall_mpls(hwt); -} - -/* Deactivate a task's hardwall. */ -static int hardwall_deactivate(struct hardwall_type *hwt, - struct task_struct *task) -{ - unsigned long flags; - int activated; - - spin_lock_irqsave(&hwt->lock, flags); - activated = (task->thread.hardwall[hwt->index].info != NULL); - if (activated) - _hardwall_deactivate(hwt, task); - spin_unlock_irqrestore(&hwt->lock, flags); - - if (!activated) - return -EINVAL; - - printk(KERN_DEBUG "Pid %d (%s) deactivated for %s hardwall: cpu %d\n", - task->pid, task->comm, hwt->name, raw_smp_processor_id()); - return 0; -} - -void hardwall_deactivate_all(struct task_struct *task) -{ - int i; - for (i = 0; i < HARDWALL_TYPES; ++i) - if (task->thread.hardwall[i].info) - hardwall_deactivate(&hardwall_types[i], task); -} - -/* Stop the switch before draining the network. */ -static void stop_xdn_switch(void *arg) -{ -#if !CHIP_HAS_REV1_XDN() - /* Freeze the switch and the demux. */ - __insn_mtspr(SPR_UDN_SP_FREEZE, - SPR_UDN_SP_FREEZE__SP_FRZ_MASK | - SPR_UDN_SP_FREEZE__DEMUX_FRZ_MASK | - SPR_UDN_SP_FREEZE__NON_DEST_EXT_MASK); -#else - /* - * Drop all packets bound for the core or off the edge. - * We rely on the normal hardwall protection setup code - * to have set the low four bits to trigger firewall interrupts, - * and shift those bits up to trigger "drop on send" semantics, - * plus adding "drop on send to core" for all switches. - * In practice it seems the switches latch the DIRECTION_PROTECT - * SPR so they won't start dropping if they're already - * delivering the last message to the core, but it doesn't - * hurt to enable it here. - */ - struct hardwall_type *hwt = arg; - unsigned long protect = mfspr_XDN(hwt, DIRECTION_PROTECT); - mtspr_XDN(hwt, DIRECTION_PROTECT, (protect | C_PROTECT) << 5); -#endif -} - -static void empty_xdn_demuxes(struct hardwall_type *hwt) -{ -#ifndef __tilepro__ - if (hwt->is_idn) { - while (__insn_mfspr(SPR_IDN_DATA_AVAIL) & (1 << 0)) - (void) __tile_idn0_receive(); - while (__insn_mfspr(SPR_IDN_DATA_AVAIL) & (1 << 1)) - (void) __tile_idn1_receive(); - return; - } -#endif - while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 0)) - (void) __tile_udn0_receive(); - while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 1)) - (void) __tile_udn1_receive(); - while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 2)) - (void) __tile_udn2_receive(); - while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 3)) - (void) __tile_udn3_receive(); -} - -/* Drain all the state from a stopped switch. */ -static void drain_xdn_switch(void *arg) -{ - struct hardwall_info *info = arg; - struct hardwall_type *hwt = info->type; - -#if CHIP_HAS_REV1_XDN() - /* - * The switches have been configured to drop any messages - * destined for cores (or off the edge of the rectangle). - * But the current message may continue to be delivered, - * so we wait until all the cores have finished any pending - * messages before we stop draining. - */ - int pending = mfspr_XDN(hwt, PENDING); - while (pending--) { - empty_xdn_demuxes(hwt); - if (hwt->is_idn) - __tile_idn_send(0); - else - __tile_udn_send(0); - } - atomic_dec(&info->xdn_pending_count); - while (atomic_read(&info->xdn_pending_count)) - empty_xdn_demuxes(hwt); -#else - int i; - int from_tile_words, ca_count; - - /* Empty out the 5 switch point fifos. */ - for (i = 0; i < 5; i++) { - int words, j; - __insn_mtspr(SPR_UDN_SP_FIFO_SEL, i); - words = __insn_mfspr(SPR_UDN_SP_STATE) & 0xF; - for (j = 0; j < words; j++) - (void) __insn_mfspr(SPR_UDN_SP_FIFO_DATA); - BUG_ON((__insn_mfspr(SPR_UDN_SP_STATE) & 0xF) != 0); - } - - /* Dump out the 3 word fifo at top. */ - from_tile_words = (__insn_mfspr(SPR_UDN_DEMUX_STATUS) >> 10) & 0x3; - for (i = 0; i < from_tile_words; i++) - (void) __insn_mfspr(SPR_UDN_DEMUX_WRITE_FIFO); - - /* Empty out demuxes. */ - empty_xdn_demuxes(hwt); - - /* Empty out catch all. */ - ca_count = __insn_mfspr(SPR_UDN_DEMUX_CA_COUNT); - for (i = 0; i < ca_count; i++) - (void) __insn_mfspr(SPR_UDN_CA_DATA); - BUG_ON(__insn_mfspr(SPR_UDN_DEMUX_CA_COUNT) != 0); - - /* Clear demux logic. */ - __insn_mtspr(SPR_UDN_DEMUX_CTL, 1); - - /* - * Write switch state; experimentation indicates that 0xc3000 - * is an idle switch point. - */ - for (i = 0; i < 5; i++) { - __insn_mtspr(SPR_UDN_SP_FIFO_SEL, i); - __insn_mtspr(SPR_UDN_SP_STATE, 0xc3000); - } -#endif -} - -/* Reset random XDN state registers at boot up and during hardwall teardown. */ -static void reset_xdn_network_state(struct hardwall_type *hwt) -{ - if (hwt->disabled) - return; - - /* Clear out other random registers so we have a clean slate. */ - mtspr_XDN(hwt, DIRECTION_PROTECT, 0); - mtspr_XDN(hwt, AVAIL_EN, 0); - mtspr_XDN(hwt, DEADLOCK_TIMEOUT, 0); - -#if !CHIP_HAS_REV1_XDN() - /* Reset UDN coordinates to their standard value */ - { - unsigned int cpu = smp_processor_id(); - unsigned int x = cpu_x(cpu); - unsigned int y = cpu_y(cpu); - __insn_mtspr(SPR_UDN_TILE_COORD, (x << 18) | (y << 7)); - } - - /* Set demux tags to predefined values and enable them. */ - __insn_mtspr(SPR_UDN_TAG_VALID, 0xf); - __insn_mtspr(SPR_UDN_TAG_0, (1 << 0)); - __insn_mtspr(SPR_UDN_TAG_1, (1 << 1)); - __insn_mtspr(SPR_UDN_TAG_2, (1 << 2)); - __insn_mtspr(SPR_UDN_TAG_3, (1 << 3)); - - /* Set other rev0 random registers to a clean state. */ - __insn_mtspr(SPR_UDN_REFILL_EN, 0); - __insn_mtspr(SPR_UDN_DEMUX_QUEUE_SEL, 0); - __insn_mtspr(SPR_UDN_SP_FIFO_SEL, 0); - - /* Start the switch and demux. */ - __insn_mtspr(SPR_UDN_SP_FREEZE, 0); -#endif -} - -void reset_network_state(void) -{ - reset_xdn_network_state(&hardwall_types[HARDWALL_UDN]); -#ifndef __tilepro__ - reset_xdn_network_state(&hardwall_types[HARDWALL_IDN]); -#endif -} - -/* Restart an XDN switch after draining. */ -static void restart_xdn_switch(void *arg) -{ - struct hardwall_type *hwt = arg; - -#if CHIP_HAS_REV1_XDN() - /* One last drain step to avoid races with injection and draining. */ - empty_xdn_demuxes(hwt); -#endif - - reset_xdn_network_state(hwt); - - /* Disable firewall interrupts. */ - disable_firewall_interrupts(hwt); -} - -/* Last reference to a hardwall is gone, so clear the network. */ -static void hardwall_destroy(struct hardwall_info *info) -{ - struct task_struct *task; - struct hardwall_type *hwt; - unsigned long flags; - - /* Make sure this file actually represents a hardwall. */ - if (info == NULL) - return; - - /* - * Deactivate any remaining tasks. It's possible to race with - * some other thread that is exiting and hasn't yet called - * deactivate (when freeing its thread_info), so we carefully - * deactivate any remaining tasks before freeing the - * hardwall_info object itself. - */ - hwt = info->type; - info->teardown_in_progress = 1; - spin_lock_irqsave(&hwt->lock, flags); - list_for_each_entry(task, &info->task_head, - thread.hardwall[hwt->index].list) - _hardwall_deactivate(hwt, task); - spin_unlock_irqrestore(&hwt->lock, flags); - - if (hwt->is_xdn) { - /* Configure the switches for draining the user network. */ - printk(KERN_DEBUG - "Clearing %s hardwall rectangle %dx%d %d,%d\n", - hwt->name, info->width, info->height, - info->ulhc_x, info->ulhc_y); - on_each_cpu_mask(&info->cpumask, stop_xdn_switch, hwt, 1); - - /* Drain the network. */ -#if CHIP_HAS_REV1_XDN() - atomic_set(&info->xdn_pending_count, - cpumask_weight(&info->cpumask)); - on_each_cpu_mask(&info->cpumask, drain_xdn_switch, info, 0); -#else - on_each_cpu_mask(&info->cpumask, drain_xdn_switch, info, 1); -#endif - - /* Restart switch and disable firewall. */ - on_each_cpu_mask(&info->cpumask, restart_xdn_switch, hwt, 1); - } - - /* Remove the /proc/tile/hardwall entry. */ - hardwall_remove_proc(info); - - /* Now free the hardwall from the list. */ - spin_lock_irqsave(&hwt->lock, flags); - BUG_ON(!list_empty(&info->task_head)); - list_del(&info->list); - spin_unlock_irqrestore(&hwt->lock, flags); - kfree(info); -} - - -static int hardwall_proc_show(struct seq_file *sf, void *v) -{ - struct hardwall_info *info = sf->private; - - seq_printf(sf, "%*pbl\n", cpumask_pr_args(&info->cpumask)); - return 0; -} - -static int hardwall_proc_open(struct inode *inode, - struct file *file) -{ - return single_open(file, hardwall_proc_show, PDE_DATA(inode)); -} - -static const struct file_operations hardwall_proc_fops = { - .open = hardwall_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static void hardwall_add_proc(struct hardwall_info *info) -{ - char buf[64]; - snprintf(buf, sizeof(buf), "%d", info->id); - proc_create_data(buf, 0444, info->type->proc_dir, - &hardwall_proc_fops, info); -} - -static void hardwall_remove_proc(struct hardwall_info *info) -{ - char buf[64]; - snprintf(buf, sizeof(buf), "%d", info->id); - remove_proc_entry(buf, info->type->proc_dir); -} - -int proc_pid_hardwall(struct seq_file *m, struct pid_namespace *ns, - struct pid *pid, struct task_struct *task) -{ - int i; - int n = 0; - for (i = 0; i < HARDWALL_TYPES; ++i) { - struct hardwall_info *info = task->thread.hardwall[i].info; - if (info) - seq_printf(m, "%s: %d\n", info->type->name, info->id); - } - return n; -} - -void proc_tile_hardwall_init(struct proc_dir_entry *root) -{ - int i; - for (i = 0; i < HARDWALL_TYPES; ++i) { - struct hardwall_type *hwt = &hardwall_types[i]; - if (hwt->disabled) - continue; - if (hardwall_proc_dir == NULL) - hardwall_proc_dir = proc_mkdir("hardwall", root); - hwt->proc_dir = proc_mkdir(hwt->name, hardwall_proc_dir); - } -} - - -/* - * Character device support via ioctl/close. - */ - -static long hardwall_ioctl(struct file *file, unsigned int a, unsigned long b) -{ - struct hardwall_info *info = file->private_data; - int minor = iminor(file->f_mapping->host); - struct hardwall_type* hwt; - - if (_IOC_TYPE(a) != HARDWALL_IOCTL_BASE) - return -EINVAL; - - BUILD_BUG_ON(HARDWALL_TYPES != _HARDWALL_TYPES); - BUILD_BUG_ON(HARDWALL_TYPES != - sizeof(hardwall_types)/sizeof(hardwall_types[0])); - - if (minor < 0 || minor >= HARDWALL_TYPES) - return -EINVAL; - hwt = &hardwall_types[minor]; - WARN_ON(info && hwt != info->type); - - switch (_IOC_NR(a)) { - case _HARDWALL_CREATE: - if (hwt->disabled) - return -ENOSYS; - if (info != NULL) - return -EALREADY; - info = hardwall_create(hwt, _IOC_SIZE(a), - (const unsigned char __user *)b); - if (IS_ERR(info)) - return PTR_ERR(info); - file->private_data = info; - return 0; - - case _HARDWALL_ACTIVATE: - return hardwall_activate(info); - - case _HARDWALL_DEACTIVATE: - if (current->thread.hardwall[hwt->index].info != info) - return -EINVAL; - return hardwall_deactivate(hwt, current); - - case _HARDWALL_GET_ID: - return info ? info->id : -EINVAL; - - default: - return -EINVAL; - } -} - -#ifdef CONFIG_COMPAT -static long hardwall_compat_ioctl(struct file *file, - unsigned int a, unsigned long b) -{ - /* Sign-extend the argument so it can be used as a pointer. */ - return hardwall_ioctl(file, a, (unsigned long)compat_ptr(b)); -} -#endif - -/* The user process closed the file; revoke access to user networks. */ -static int hardwall_flush(struct file *file, fl_owner_t owner) -{ - struct hardwall_info *info = file->private_data; - struct task_struct *task, *tmp; - unsigned long flags; - - if (info) { - /* - * NOTE: if multiple threads are activated on this hardwall - * file, the other threads will continue having access to the - * user network until they are context-switched out and back - * in again. - * - * NOTE: A NULL files pointer means the task is being torn - * down, so in that case we also deactivate it. - */ - struct hardwall_type *hwt = info->type; - spin_lock_irqsave(&hwt->lock, flags); - list_for_each_entry_safe(task, tmp, &info->task_head, - thread.hardwall[hwt->index].list) { - if (task->files == owner || task->files == NULL) - _hardwall_deactivate(hwt, task); - } - spin_unlock_irqrestore(&hwt->lock, flags); - } - - return 0; -} - -/* This hardwall is gone, so destroy it. */ -static int hardwall_release(struct inode *inode, struct file *file) -{ - hardwall_destroy(file->private_data); - return 0; -} - -static const struct file_operations dev_hardwall_fops = { - .open = nonseekable_open, - .unlocked_ioctl = hardwall_ioctl, -#ifdef CONFIG_COMPAT - .compat_ioctl = hardwall_compat_ioctl, -#endif - .flush = hardwall_flush, - .release = hardwall_release, -}; - -static struct cdev hardwall_dev; - -static int __init dev_hardwall_init(void) -{ - int rc; - dev_t dev; - - rc = alloc_chrdev_region(&dev, 0, HARDWALL_TYPES, "hardwall"); - if (rc < 0) - return rc; - cdev_init(&hardwall_dev, &dev_hardwall_fops); - rc = cdev_add(&hardwall_dev, dev, HARDWALL_TYPES); - if (rc < 0) - return rc; - - return 0; -} -late_initcall(dev_hardwall_init); diff --git a/arch/tile/kernel/head_32.S b/arch/tile/kernel/head_32.S deleted file mode 100644 index 8d5b40ff2922..000000000000 --- a/arch/tile/kernel/head_32.S +++ /dev/null @@ -1,183 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * TILE startup code. - */ - -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/thread_info.h> -#include <asm/processor.h> -#include <asm/asm-offsets.h> -#include <hv/hypervisor.h> -#include <arch/chip.h> -#include <arch/spr_def.h> - -/* - * This module contains the entry code for kernel images. It performs the - * minimal setup needed to call the generic C routines. - */ - - __HEAD -ENTRY(_start) - /* Notify the hypervisor of what version of the API we want */ - { - movei r1, TILE_CHIP - movei r2, TILE_CHIP_REV - } - { - moveli r0, _HV_VERSION_OLD_HV_INIT - jal _hv_init - } - /* Get a reasonable default ASID in r0 */ - { - move r0, zero - jal _hv_inquire_asid - } - /* Install the default page table */ - { - moveli r6, lo16(swapper_pgprot - PAGE_OFFSET) - move r4, r0 /* use starting ASID of range for this page table */ - } - { - moveli r0, lo16(swapper_pg_dir - PAGE_OFFSET) - auli r6, r6, ha16(swapper_pgprot - PAGE_OFFSET) - } - { - lw r2, r6 - addi r6, r6, 4 - } - { - lw r3, r6 - auli r0, r0, ha16(swapper_pg_dir - PAGE_OFFSET) - } - { - finv r6 - move r1, zero /* high 32 bits of CPA is zero */ - } - { - moveli lr, lo16(1f) - moveli r5, CTX_PAGE_FLAG - } - { - auli lr, lr, ha16(1f) - j _hv_install_context - } -1: - - /* Get our processor number and save it away in SAVE_K_0. */ - jal _hv_inquire_topology - mulll_uu r4, r1, r2 /* r1 == y, r2 == width */ - add r4, r4, r0 /* r0 == x, so r4 == cpu == y*width + x */ - -#ifdef CONFIG_SMP - /* - * Load up our per-cpu offset. When the first (master) tile - * boots, this value is still zero, so we will load boot_pc - * with start_kernel, and boot_sp at the top of init_stack. - * The master tile initializes the per-cpu offset array, so that - * when subsequent (secondary) tiles boot, they will instead load - * from their per-cpu versions of boot_sp and boot_pc. - */ - moveli r5, lo16(__per_cpu_offset) - auli r5, r5, ha16(__per_cpu_offset) - s2a r5, r4, r5 - lw r5, r5 - bnz r5, 1f - - /* - * Save the width and height to the smp_topology variable - * for later use. - */ - moveli r0, lo16(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET) - auli r0, r0, ha16(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET) - { - sw r0, r2 - addi r0, r0, (HV_TOPOLOGY_HEIGHT_OFFSET - HV_TOPOLOGY_WIDTH_OFFSET) - } - sw r0, r3 -1: -#else - move r5, zero -#endif - - /* Load and go with the correct pc and sp. */ - { - addli r1, r5, lo16(boot_sp) - addli r0, r5, lo16(boot_pc) - } - { - auli r1, r1, ha16(boot_sp) - auli r0, r0, ha16(boot_pc) - } - lw r0, r0 - lw sp, r1 - or r4, sp, r4 - mtspr SPR_SYSTEM_SAVE_K_0, r4 /* save ksp0 + cpu */ - { - move lr, zero /* stop backtraces in the called function */ - jr r0 - } - ENDPROC(_start) - -__PAGE_ALIGNED_BSS - .align PAGE_SIZE -ENTRY(empty_zero_page) - .fill PAGE_SIZE,1,0 - END(empty_zero_page) - - .macro PTE va, cpa, bits1, no_org=0 - .ifeq \no_org - .org swapper_pg_dir + PGD_INDEX(\va) * HV_PTE_SIZE - .endif - .word HV_PTE_PAGE | HV_PTE_DIRTY | HV_PTE_PRESENT | HV_PTE_ACCESSED | \ - (HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE) - .word (\bits1) | (HV_CPA_TO_PTFN(\cpa) << (HV_PTE_INDEX_PTFN - 32)) - .endm - -__PAGE_ALIGNED_DATA - .align PAGE_SIZE -ENTRY(swapper_pg_dir) - /* - * All data pages from PAGE_OFFSET to MEM_USER_INTRPT are mapped as - * VA = PA + PAGE_OFFSET. We remap things with more precise access - * permissions and more respect for size of RAM later. - */ - .set addr, 0 - .rept (MEM_USER_INTRPT - PAGE_OFFSET) >> PGDIR_SHIFT - PTE addr + PAGE_OFFSET, addr, (1 << (HV_PTE_INDEX_READABLE - 32)) | \ - (1 << (HV_PTE_INDEX_WRITABLE - 32)) - .set addr, addr + PGDIR_SIZE - .endr - - /* The true text VAs are mapped as VA = PA + MEM_SV_START */ - PTE MEM_SV_START, 0, (1 << (HV_PTE_INDEX_READABLE - 32)) | \ - (1 << (HV_PTE_INDEX_EXECUTABLE - 32)) - .org swapper_pg_dir + PGDIR_SIZE - END(swapper_pg_dir) - - /* - * Isolate swapper_pgprot to its own cache line, since each cpu - * starting up will read it using VA-is-PA and local homing. - * This would otherwise likely conflict with other data on the cache - * line, once we have set its permanent home in the page tables. - */ - __INITDATA - .align CHIP_L2_LINE_SIZE() -ENTRY(swapper_pgprot) - PTE 0, 0, (1 << (HV_PTE_INDEX_READABLE - 32)) | \ - (1 << (HV_PTE_INDEX_WRITABLE - 32)), 1 - .align CHIP_L2_LINE_SIZE() - END(swapper_pgprot) diff --git a/arch/tile/kernel/head_64.S b/arch/tile/kernel/head_64.S deleted file mode 100644 index bd0e12f283f3..000000000000 --- a/arch/tile/kernel/head_64.S +++ /dev/null @@ -1,279 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * TILE startup code. - */ - -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/thread_info.h> -#include <asm/processor.h> -#include <asm/asm-offsets.h> -#include <hv/hypervisor.h> -#include <arch/chip.h> -#include <arch/spr_def.h> - -/* Extract two 32-bit bit values that were read into one register. */ -#ifdef __BIG_ENDIAN__ -#define GET_FIRST_INT(rd, rs) shrsi rd, rs, 32 -#define GET_SECOND_INT(rd, rs) addxi rd, rs, 0 -#else -#define GET_FIRST_INT(rd, rs) addxi rd, rs, 0 -#define GET_SECOND_INT(rd, rs) shrsi rd, rs, 32 -#endif - -/* - * This module contains the entry code for kernel images. It performs the - * minimal setup needed to call the generic C routines. - */ - - __HEAD -ENTRY(_start) - /* Notify the hypervisor of what version of the API we want */ - { -#if KERNEL_PL == 1 && _HV_VERSION == 13 - /* Support older hypervisors by asking for API version 12. */ - movei r0, _HV_VERSION_OLD_HV_INIT -#else - movei r0, _HV_VERSION -#endif - movei r1, TILE_CHIP - } - { - movei r2, TILE_CHIP_REV - movei r3, KERNEL_PL - } - jal _hv_init - /* Get a reasonable default ASID in r0 */ - { - move r0, zero - jal _hv_inquire_asid - } - - /* - * Install the default page table. The relocation required to - * statically define the table is a bit too complex, so we have - * to plug in the pointer from the L0 to the L1 table by hand. - * We only do this on the first cpu to boot, though, since the - * other CPUs should see a properly-constructed page table. - */ - { - GET_FIRST_INT(r2, r0) /* ASID for hv_install_context */ - moveli r4, hw1_last(swapper_pgprot - PAGE_OFFSET) - } - { - shl16insli r4, r4, hw0(swapper_pgprot - PAGE_OFFSET) - } - { - ld r1, r4 /* access_pte for hv_install_context */ - } - { - moveli r0, hw1_last(.Lsv_data_pmd - PAGE_OFFSET) - moveli r6, hw1_last(temp_data_pmd - PAGE_OFFSET) - } - { - /* After initializing swapper_pgprot, HV_PTE_GLOBAL is set. */ - bfextu r7, r1, HV_PTE_INDEX_GLOBAL, HV_PTE_INDEX_GLOBAL - finv r4 - } - bnez r7, .Lno_write - { - shl16insli r0, r0, hw0(.Lsv_data_pmd - PAGE_OFFSET) - shl16insli r6, r6, hw0(temp_data_pmd - PAGE_OFFSET) - } - { - /* Cut off the low bits of the PT address. */ - shrui r6, r6, HV_LOG2_PAGE_TABLE_ALIGN - /* Start with our access pte. */ - move r5, r1 - } - { - /* Stuff the address into the page table pointer slot of the PTE. */ - bfins r5, r6, HV_PTE_INDEX_PTFN, \ - HV_PTE_INDEX_PTFN + HV_PTE_PTFN_BITS - 1 - } - { - /* Store the L0 data PTE. */ - st r0, r5 - addli r6, r6, (temp_code_pmd - temp_data_pmd) >> \ - HV_LOG2_PAGE_TABLE_ALIGN - } - { - addli r0, r0, .Lsv_code_pmd - .Lsv_data_pmd - bfins r5, r6, HV_PTE_INDEX_PTFN, \ - HV_PTE_INDEX_PTFN + HV_PTE_PTFN_BITS - 1 - } - /* Store the L0 code PTE. */ - st r0, r5 - -.Lno_write: - moveli lr, hw2_last(1f) - { - shl16insli lr, lr, hw1(1f) - moveli r0, hw1_last(swapper_pg_dir - PAGE_OFFSET) - } - { - shl16insli lr, lr, hw0(1f) - shl16insli r0, r0, hw0(swapper_pg_dir - PAGE_OFFSET) - } - { - moveli r3, CTX_PAGE_FLAG - j _hv_install_context - } -1: - - /* Install the interrupt base. */ - moveli r0, hw2_last(intrpt_start) - shl16insli r0, r0, hw1(intrpt_start) - shl16insli r0, r0, hw0(intrpt_start) - mtspr SPR_INTERRUPT_VECTOR_BASE_K, r0 - - /* Get our processor number and save it away in SAVE_K_0. */ - jal _hv_inquire_topology - { - GET_FIRST_INT(r5, r1) /* r5 = width */ - GET_SECOND_INT(r4, r0) /* r4 = y */ - } - { - GET_FIRST_INT(r6, r0) /* r6 = x */ - mul_lu_lu r4, r4, r5 - } - { - add r4, r4, r6 /* r4 == cpu == y*width + x */ - } - -#ifdef CONFIG_SMP - /* - * Load up our per-cpu offset. When the first (master) tile - * boots, this value is still zero, so we will load boot_pc - * with start_kernel, and boot_sp with at the top of init_stack. - * The master tile initializes the per-cpu offset array, so that - * when subsequent (secondary) tiles boot, they will instead load - * from their per-cpu versions of boot_sp and boot_pc. - */ - moveli r5, hw2_last(__per_cpu_offset) - shl16insli r5, r5, hw1(__per_cpu_offset) - shl16insli r5, r5, hw0(__per_cpu_offset) - shl3add r5, r4, r5 - ld r5, r5 - bnez r5, 1f - - /* - * Save the width and height to the smp_topology variable - * for later use. - */ - moveli r0, hw2_last(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET) - shl16insli r0, r0, hw1(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET) - shl16insli r0, r0, hw0(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET) - st r0, r1 -1: -#else - move r5, zero -#endif - - /* Load and go with the correct pc and sp. */ - { - moveli r1, hw2_last(boot_sp) - moveli r0, hw2_last(boot_pc) - } - { - shl16insli r1, r1, hw1(boot_sp) - shl16insli r0, r0, hw1(boot_pc) - } - { - shl16insli r1, r1, hw0(boot_sp) - shl16insli r0, r0, hw0(boot_pc) - } - { - add r1, r1, r5 - add r0, r0, r5 - } - ld r0, r0 - ld sp, r1 - shli r4, r4, CPU_SHIFT - bfins r4, sp, 0, CPU_SHIFT-1 - mtspr SPR_SYSTEM_SAVE_K_0, r4 /* save ksp0 + cpu */ - { - move lr, zero /* stop backtraces in the called function */ - jr r0 - } - ENDPROC(_start) - -__PAGE_ALIGNED_BSS - .align PAGE_SIZE -ENTRY(empty_zero_page) - .fill PAGE_SIZE,1,0 - END(empty_zero_page) - - .macro PTE cpa, bits1 - .quad HV_PTE_PAGE | HV_PTE_DIRTY | HV_PTE_PRESENT | HV_PTE_ACCESSED |\ - HV_PTE_GLOBAL | (HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE) |\ - (\bits1) | (HV_CPA_TO_PTFN(\cpa) << HV_PTE_INDEX_PTFN) - .endm - -__PAGE_ALIGNED_DATA - .align PAGE_SIZE -ENTRY(swapper_pg_dir) - .org swapper_pg_dir + PGD_INDEX(PAGE_OFFSET) * HV_PTE_SIZE -.Lsv_data_pmd: - .quad 0 /* PTE temp_data_pmd - PAGE_OFFSET, 0 */ - .org swapper_pg_dir + PGD_INDEX(MEM_SV_START) * HV_PTE_SIZE -.Lsv_code_pmd: - .quad 0 /* PTE temp_code_pmd - PAGE_OFFSET, 0 */ - .org swapper_pg_dir + SIZEOF_PGD - END(swapper_pg_dir) - - .align HV_PAGE_TABLE_ALIGN -ENTRY(temp_data_pmd) - /* - * We fill the PAGE_OFFSET pmd with huge pages with - * VA = PA + PAGE_OFFSET. We remap things with more precise access - * permissions later. - */ - .set addr, 0 - .rept PTRS_PER_PMD - PTE addr, HV_PTE_READABLE | HV_PTE_WRITABLE - .set addr, addr + HPAGE_SIZE - .endr - .org temp_data_pmd + SIZEOF_PMD - END(temp_data_pmd) - - .align HV_PAGE_TABLE_ALIGN -ENTRY(temp_code_pmd) - /* - * We fill the MEM_SV_START pmd with huge pages with - * VA = PA + PAGE_OFFSET. We remap things with more precise access - * permissions later. - */ - .set addr, 0 - .rept PTRS_PER_PMD - PTE addr, HV_PTE_READABLE | HV_PTE_EXECUTABLE - .set addr, addr + HPAGE_SIZE - .endr - .org temp_code_pmd + SIZEOF_PMD - END(temp_code_pmd) - - /* - * Isolate swapper_pgprot to its own cache line, since each cpu - * starting up will read it using VA-is-PA and local homing. - * This would otherwise likely conflict with other data on the cache - * line, once we have set its permanent home in the page tables. - */ - __INITDATA - .align CHIP_L2_LINE_SIZE() -ENTRY(swapper_pgprot) - .quad HV_PTE_PRESENT | (HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE) - .align CHIP_L2_LINE_SIZE() - END(swapper_pgprot) diff --git a/arch/tile/kernel/hvglue.S b/arch/tile/kernel/hvglue.S deleted file mode 100644 index 70c661448638..000000000000 --- a/arch/tile/kernel/hvglue.S +++ /dev/null @@ -1,76 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Hypervisor call vector addresses; see <hv/hypervisor.h> */ -.macro gensym sym, val, size -.org \val -.global _\sym -.type _\sym,function -_\sym: -.size _\sym,\size -#ifndef CONFIG_TILE_HVGLUE_TRACE -.globl \sym -.set \sym,_\sym -#endif -.endm - -.section .hvglue,"x",@nobits -.align 8 -gensym hv_init, 0x20, 32 -gensym hv_install_context, 0x40, 32 -gensym hv_sysconf, 0x60, 32 -gensym hv_get_rtc, 0x80, 32 -gensym hv_set_rtc, 0xa0, 32 -gensym hv_flush_asid, 0xc0, 32 -gensym hv_flush_page, 0xe0, 32 -gensym hv_flush_pages, 0x100, 32 -gensym hv_restart, 0x120, 32 -gensym hv_halt, 0x140, 32 -gensym hv_power_off, 0x160, 32 -gensym hv_inquire_physical, 0x180, 32 -gensym hv_inquire_memory_controller, 0x1a0, 32 -gensym hv_inquire_virtual, 0x1c0, 32 -gensym hv_inquire_asid, 0x1e0, 32 -gensym hv_nanosleep, 0x200, 32 -gensym hv_console_read_if_ready, 0x220, 32 -gensym hv_console_write, 0x240, 32 -gensym hv_downcall_dispatch, 0x260, 32 -gensym hv_inquire_topology, 0x280, 32 -gensym hv_fs_findfile, 0x2a0, 32 -gensym hv_fs_fstat, 0x2c0, 32 -gensym hv_fs_pread, 0x2e0, 32 -gensym hv_physaddr_read64, 0x300, 32 -gensym hv_physaddr_write64, 0x320, 32 -gensym hv_get_command_line, 0x340, 32 -gensym hv_set_caching, 0x360, 32 -gensym hv_bzero_page, 0x380, 32 -gensym hv_register_message_state, 0x3a0, 32 -gensym hv_send_message, 0x3c0, 32 -gensym hv_receive_message, 0x3e0, 32 -gensym hv_inquire_context, 0x400, 32 -gensym hv_start_all_tiles, 0x420, 32 -gensym hv_dev_open, 0x440, 32 -gensym hv_dev_close, 0x460, 32 -gensym hv_dev_pread, 0x480, 32 -gensym hv_dev_pwrite, 0x4a0, 32 -gensym hv_dev_poll, 0x4c0, 32 -gensym hv_dev_poll_cancel, 0x4e0, 32 -gensym hv_dev_preada, 0x500, 32 -gensym hv_dev_pwritea, 0x520, 32 -gensym hv_flush_remote, 0x540, 32 -gensym hv_console_putc, 0x560, 32 -gensym hv_inquire_tiles, 0x580, 32 -gensym hv_confstr, 0x5a0, 32 -gensym hv_reexec, 0x5c0, 32 -gensym hv_set_command_line, 0x5e0, 32 -gensym hv_clear_intr, 0x600, 32 -gensym hv_enable_intr, 0x620, 32 -gensym hv_disable_intr, 0x640, 32 -gensym hv_raise_intr, 0x660, 32 -gensym hv_trigger_ipi, 0x680, 32 -gensym hv_store_mapping, 0x6a0, 32 -gensym hv_inquire_realpa, 0x6c0, 32 -gensym hv_flush_all, 0x6e0, 32 -gensym hv_get_ipi_pte, 0x700, 32 -gensym hv_set_pte_super_shift, 0x720, 32 -gensym hv_console_set_ipi, 0x7e0, 32 -gensym hv_send_nmi, 0x820, 32 -gensym hv_glue_internals, 0x820, 30688 diff --git a/arch/tile/kernel/hvglue_trace.c b/arch/tile/kernel/hvglue_trace.c deleted file mode 100644 index add0d71395c6..000000000000 --- a/arch/tile/kernel/hvglue_trace.c +++ /dev/null @@ -1,270 +0,0 @@ -/* - * Copyright 2013 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* - * Pull in the hypervisor header so we declare all the ABI functions - * with the underscore versions, then undef the names so that we can - * provide our own wrapper versions. - */ -#define hv_init _hv_init -#define hv_install_context _hv_install_context -#define hv_sysconf _hv_sysconf -#define hv_get_rtc _hv_get_rtc -#define hv_set_rtc _hv_set_rtc -#define hv_flush_asid _hv_flush_asid -#define hv_flush_page _hv_flush_page -#define hv_flush_pages _hv_flush_pages -#define hv_restart _hv_restart -#define hv_halt _hv_halt -#define hv_power_off _hv_power_off -#define hv_inquire_physical _hv_inquire_physical -#define hv_inquire_memory_controller _hv_inquire_memory_controller -#define hv_inquire_virtual _hv_inquire_virtual -#define hv_inquire_asid _hv_inquire_asid -#define hv_nanosleep _hv_nanosleep -#define hv_console_read_if_ready _hv_console_read_if_ready -#define hv_console_write _hv_console_write -#define hv_downcall_dispatch _hv_downcall_dispatch -#define hv_inquire_topology _hv_inquire_topology -#define hv_fs_findfile _hv_fs_findfile -#define hv_fs_fstat _hv_fs_fstat -#define hv_fs_pread _hv_fs_pread -#define hv_physaddr_read64 _hv_physaddr_read64 -#define hv_physaddr_write64 _hv_physaddr_write64 -#define hv_get_command_line _hv_get_command_line -#define hv_set_caching _hv_set_caching -#define hv_bzero_page _hv_bzero_page -#define hv_register_message_state _hv_register_message_state -#define hv_send_message _hv_send_message -#define hv_receive_message _hv_receive_message -#define hv_inquire_context _hv_inquire_context -#define hv_start_all_tiles _hv_start_all_tiles -#define hv_dev_open _hv_dev_open -#define hv_dev_close _hv_dev_close -#define hv_dev_pread _hv_dev_pread -#define hv_dev_pwrite _hv_dev_pwrite -#define hv_dev_poll _hv_dev_poll -#define hv_dev_poll_cancel _hv_dev_poll_cancel -#define hv_dev_preada _hv_dev_preada -#define hv_dev_pwritea _hv_dev_pwritea -#define hv_flush_remote _hv_flush_remote -#define hv_console_putc _hv_console_putc -#define hv_inquire_tiles _hv_inquire_tiles -#define hv_confstr _hv_confstr -#define hv_reexec _hv_reexec -#define hv_set_command_line _hv_set_command_line -#define hv_clear_intr _hv_clear_intr -#define hv_enable_intr _hv_enable_intr -#define hv_disable_intr _hv_disable_intr -#define hv_raise_intr _hv_raise_intr -#define hv_trigger_ipi _hv_trigger_ipi -#define hv_store_mapping _hv_store_mapping -#define hv_inquire_realpa _hv_inquire_realpa -#define hv_flush_all _hv_flush_all -#define hv_get_ipi_pte _hv_get_ipi_pte -#define hv_set_pte_super_shift _hv_set_pte_super_shift -#define hv_console_set_ipi _hv_console_set_ipi -#define hv_send_nmi _hv_send_nmi -#include <hv/hypervisor.h> -#undef hv_init -#undef hv_install_context -#undef hv_sysconf -#undef hv_get_rtc -#undef hv_set_rtc -#undef hv_flush_asid -#undef hv_flush_page -#undef hv_flush_pages -#undef hv_restart -#undef hv_halt -#undef hv_power_off -#undef hv_inquire_physical -#undef hv_inquire_memory_controller -#undef hv_inquire_virtual -#undef hv_inquire_asid -#undef hv_nanosleep -#undef hv_console_read_if_ready -#undef hv_console_write -#undef hv_downcall_dispatch -#undef hv_inquire_topology -#undef hv_fs_findfile -#undef hv_fs_fstat -#undef hv_fs_pread -#undef hv_physaddr_read64 -#undef hv_physaddr_write64 -#undef hv_get_command_line -#undef hv_set_caching -#undef hv_bzero_page -#undef hv_register_message_state -#undef hv_send_message -#undef hv_receive_message -#undef hv_inquire_context -#undef hv_start_all_tiles -#undef hv_dev_open -#undef hv_dev_close -#undef hv_dev_pread -#undef hv_dev_pwrite -#undef hv_dev_poll -#undef hv_dev_poll_cancel -#undef hv_dev_preada -#undef hv_dev_pwritea -#undef hv_flush_remote -#undef hv_console_putc -#undef hv_inquire_tiles -#undef hv_confstr -#undef hv_reexec -#undef hv_set_command_line -#undef hv_clear_intr -#undef hv_enable_intr -#undef hv_disable_intr -#undef hv_raise_intr -#undef hv_trigger_ipi -#undef hv_store_mapping -#undef hv_inquire_realpa -#undef hv_flush_all -#undef hv_get_ipi_pte -#undef hv_set_pte_super_shift -#undef hv_console_set_ipi -#undef hv_send_nmi - -/* - * Provide macros based on <linux/syscalls.h> to provide a wrapper - * function that invokes the same function with an underscore prefix. - * We can't use the existing __SC_xxx macros because we need to - * support up to nine arguments rather than up to six, and also this - * way the file stands alone from possible changes in the - * implementation of <linux/syscalls.h>. - */ -#define HV_WRAP0(type, name) \ - type name(void); \ - type name(void) \ - { \ - return _##name(); \ - } -#define __HV_DECL1(t1, a1) t1 a1 -#define __HV_DECL2(t2, a2, ...) t2 a2, __HV_DECL1(__VA_ARGS__) -#define __HV_DECL3(t3, a3, ...) t3 a3, __HV_DECL2(__VA_ARGS__) -#define __HV_DECL4(t4, a4, ...) t4 a4, __HV_DECL3(__VA_ARGS__) -#define __HV_DECL5(t5, a5, ...) t5 a5, __HV_DECL4(__VA_ARGS__) -#define __HV_DECL6(t6, a6, ...) t6 a6, __HV_DECL5(__VA_ARGS__) -#define __HV_DECL7(t7, a7, ...) t7 a7, __HV_DECL6(__VA_ARGS__) -#define __HV_DECL8(t8, a8, ...) t8 a8, __HV_DECL7(__VA_ARGS__) -#define __HV_DECL9(t9, a9, ...) t9 a9, __HV_DECL8(__VA_ARGS__) -#define __HV_PASS1(t1, a1) a1 -#define __HV_PASS2(t2, a2, ...) a2, __HV_PASS1(__VA_ARGS__) -#define __HV_PASS3(t3, a3, ...) a3, __HV_PASS2(__VA_ARGS__) -#define __HV_PASS4(t4, a4, ...) a4, __HV_PASS3(__VA_ARGS__) -#define __HV_PASS5(t5, a5, ...) a5, __HV_PASS4(__VA_ARGS__) -#define __HV_PASS6(t6, a6, ...) a6, __HV_PASS5(__VA_ARGS__) -#define __HV_PASS7(t7, a7, ...) a7, __HV_PASS6(__VA_ARGS__) -#define __HV_PASS8(t8, a8, ...) a8, __HV_PASS7(__VA_ARGS__) -#define __HV_PASS9(t9, a9, ...) a9, __HV_PASS8(__VA_ARGS__) -#define HV_WRAPx(x, type, name, ...) \ - type name(__HV_DECL##x(__VA_ARGS__)); \ - type name(__HV_DECL##x(__VA_ARGS__)) \ - { \ - return _##name(__HV_PASS##x(__VA_ARGS__)); \ - } -#define HV_WRAP1(type, name, ...) HV_WRAPx(1, type, name, __VA_ARGS__) -#define HV_WRAP2(type, name, ...) HV_WRAPx(2, type, name, __VA_ARGS__) -#define HV_WRAP3(type, name, ...) HV_WRAPx(3, type, name, __VA_ARGS__) -#define HV_WRAP4(type, name, ...) HV_WRAPx(4, type, name, __VA_ARGS__) -#define HV_WRAP5(type, name, ...) HV_WRAPx(5, type, name, __VA_ARGS__) -#define HV_WRAP6(type, name, ...) HV_WRAPx(6, type, name, __VA_ARGS__) -#define HV_WRAP7(type, name, ...) HV_WRAPx(7, type, name, __VA_ARGS__) -#define HV_WRAP8(type, name, ...) HV_WRAPx(8, type, name, __VA_ARGS__) -#define HV_WRAP9(type, name, ...) HV_WRAPx(9, type, name, __VA_ARGS__) - -/* List all the hypervisor API functions. */ -HV_WRAP4(void, hv_init, HV_VersionNumber, interface_version_number, - int, chip_num, int, chip_rev_num, int, client_pl) -HV_WRAP1(long, hv_sysconf, HV_SysconfQuery, query) -HV_WRAP3(int, hv_confstr, HV_ConfstrQuery, query, HV_VirtAddr, buf, int, len) -#if CHIP_HAS_IPI() -HV_WRAP3(int, hv_get_ipi_pte, HV_Coord, tile, int, pl, HV_PTE*, pte) -HV_WRAP3(int, hv_console_set_ipi, int, ipi, int, event, HV_Coord, coord); -#else -HV_WRAP1(void, hv_enable_intr, HV_IntrMask, enab_mask) -HV_WRAP1(void, hv_disable_intr, HV_IntrMask, disab_mask) -HV_WRAP1(void, hv_clear_intr, HV_IntrMask, clear_mask) -HV_WRAP1(void, hv_raise_intr, HV_IntrMask, raise_mask) -HV_WRAP2(HV_Errno, hv_trigger_ipi, HV_Coord, tile, int, interrupt) -#endif /* !CHIP_HAS_IPI() */ -HV_WRAP3(int, hv_store_mapping, HV_VirtAddr, va, unsigned int, len, - HV_PhysAddr, pa) -HV_WRAP2(HV_PhysAddr, hv_inquire_realpa, HV_PhysAddr, cpa, unsigned int, len) -HV_WRAP0(HV_RTCTime, hv_get_rtc) -HV_WRAP1(void, hv_set_rtc, HV_RTCTime, time) -HV_WRAP4(int, hv_install_context, HV_PhysAddr, page_table, HV_PTE, access, - HV_ASID, asid, __hv32, flags) -HV_WRAP2(int, hv_set_pte_super_shift, int, level, int, log2_count) -HV_WRAP0(HV_Context, hv_inquire_context) -HV_WRAP1(int, hv_flush_asid, HV_ASID, asid) -HV_WRAP2(int, hv_flush_page, HV_VirtAddr, address, HV_PageSize, page_size) -HV_WRAP3(int, hv_flush_pages, HV_VirtAddr, start, HV_PageSize, page_size, - unsigned long, size) -HV_WRAP1(int, hv_flush_all, int, preserve_global) -HV_WRAP2(void, hv_restart, HV_VirtAddr, cmd, HV_VirtAddr, args) -HV_WRAP0(void, hv_halt) -HV_WRAP0(void, hv_power_off) -HV_WRAP1(int, hv_reexec, HV_PhysAddr, entry) -HV_WRAP0(HV_Topology, hv_inquire_topology) -HV_WRAP3(HV_Errno, hv_inquire_tiles, HV_InqTileSet, set, HV_VirtAddr, cpumask, - int, length) -HV_WRAP1(HV_PhysAddrRange, hv_inquire_physical, int, idx) -HV_WRAP2(HV_MemoryControllerInfo, hv_inquire_memory_controller, HV_Coord, coord, - int, controller) -HV_WRAP1(HV_VirtAddrRange, hv_inquire_virtual, int, idx) -HV_WRAP1(HV_ASIDRange, hv_inquire_asid, int, idx) -HV_WRAP1(void, hv_nanosleep, int, nanosecs) -HV_WRAP0(int, hv_console_read_if_ready) -HV_WRAP1(void, hv_console_putc, int, byte) -HV_WRAP2(int, hv_console_write, HV_VirtAddr, bytes, int, len) -HV_WRAP0(void, hv_downcall_dispatch) -HV_WRAP1(int, hv_fs_findfile, HV_VirtAddr, filename) -HV_WRAP1(HV_FS_StatInfo, hv_fs_fstat, int, inode) -HV_WRAP4(int, hv_fs_pread, int, inode, HV_VirtAddr, buf, - int, length, int, offset) -HV_WRAP2(unsigned long long, hv_physaddr_read64, HV_PhysAddr, addr, - HV_PTE, access) -HV_WRAP3(void, hv_physaddr_write64, HV_PhysAddr, addr, HV_PTE, access, - unsigned long long, val) -HV_WRAP2(int, hv_get_command_line, HV_VirtAddr, buf, int, length) -HV_WRAP2(HV_Errno, hv_set_command_line, HV_VirtAddr, buf, int, length) -HV_WRAP1(void, hv_set_caching, unsigned long, bitmask) -HV_WRAP2(void, hv_bzero_page, HV_VirtAddr, va, unsigned int, size) -HV_WRAP1(HV_Errno, hv_register_message_state, HV_MsgState*, msgstate) -HV_WRAP4(int, hv_send_message, HV_Recipient *, recips, int, nrecip, - HV_VirtAddr, buf, int, buflen) -HV_WRAP3(HV_RcvMsgInfo, hv_receive_message, HV_MsgState, msgstate, - HV_VirtAddr, buf, int, buflen) -HV_WRAP0(void, hv_start_all_tiles) -HV_WRAP2(int, hv_dev_open, HV_VirtAddr, name, __hv32, flags) -HV_WRAP1(int, hv_dev_close, int, devhdl) -HV_WRAP5(int, hv_dev_pread, int, devhdl, __hv32, flags, HV_VirtAddr, va, - __hv32, len, __hv64, offset) -HV_WRAP5(int, hv_dev_pwrite, int, devhdl, __hv32, flags, HV_VirtAddr, va, - __hv32, len, __hv64, offset) -HV_WRAP3(int, hv_dev_poll, int, devhdl, __hv32, events, HV_IntArg, intarg) -HV_WRAP1(int, hv_dev_poll_cancel, int, devhdl) -HV_WRAP6(int, hv_dev_preada, int, devhdl, __hv32, flags, __hv32, sgl_len, - HV_SGL *, sglp, __hv64, offset, HV_IntArg, intarg) -HV_WRAP6(int, hv_dev_pwritea, int, devhdl, __hv32, flags, __hv32, sgl_len, - HV_SGL *, sglp, __hv64, offset, HV_IntArg, intarg) -HV_WRAP9(int, hv_flush_remote, HV_PhysAddr, cache_pa, - unsigned long, cache_control, unsigned long*, cache_cpumask, - HV_VirtAddr, tlb_va, unsigned long, tlb_length, - unsigned long, tlb_pgsize, unsigned long*, tlb_cpumask, - HV_Remote_ASID*, asids, int, asidcount) -HV_WRAP3(HV_NMI_Info, hv_send_nmi, HV_Coord, tile, unsigned long, info, - __hv64, flags) diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S deleted file mode 100644 index 9ff75e3a318a..000000000000 --- a/arch/tile/kernel/intvec_32.S +++ /dev/null @@ -1,1906 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Linux interrupt vectors. - */ - -#include <linux/linkage.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/unistd.h> -#include <asm/ptrace.h> -#include <asm/thread_info.h> -#include <asm/irqflags.h> -#include <asm/atomic_32.h> -#include <asm/asm-offsets.h> -#include <hv/hypervisor.h> -#include <arch/abi.h> -#include <arch/interrupts.h> -#include <arch/spr_def.h> - -#define PTREGS_PTR(reg, ptreg) addli reg, sp, C_ABI_SAVE_AREA_SIZE + (ptreg) - -#define PTREGS_OFFSET_SYSCALL PTREGS_OFFSET_REG(TREG_SYSCALL_NR) - - .macro push_reg reg, ptr=sp, delta=-4 - { - sw \ptr, \reg - addli \ptr, \ptr, \delta - } - .endm - - .macro pop_reg reg, ptr=sp, delta=4 - { - lw \reg, \ptr - addli \ptr, \ptr, \delta - } - .endm - - .macro pop_reg_zero reg, zreg, ptr=sp, delta=4 - { - move \zreg, zero - lw \reg, \ptr - addi \ptr, \ptr, \delta - } - .endm - - .macro push_extra_callee_saves reg - PTREGS_PTR(\reg, PTREGS_OFFSET_REG(51)) - push_reg r51, \reg - push_reg r50, \reg - push_reg r49, \reg - push_reg r48, \reg - push_reg r47, \reg - push_reg r46, \reg - push_reg r45, \reg - push_reg r44, \reg - push_reg r43, \reg - push_reg r42, \reg - push_reg r41, \reg - push_reg r40, \reg - push_reg r39, \reg - push_reg r38, \reg - push_reg r37, \reg - push_reg r36, \reg - push_reg r35, \reg - push_reg r34, \reg, PTREGS_OFFSET_BASE - PTREGS_OFFSET_REG(34) - .endm - - .macro panic str - .pushsection .rodata, "a" -1: - .asciz "\str" - .popsection - { - moveli r0, lo16(1b) - } - { - auli r0, r0, ha16(1b) - jal panic - } - .endm - -#ifdef __COLLECT_LINKER_FEEDBACK__ - .pushsection .text.intvec_feedback,"ax" -intvec_feedback: - .popsection -#endif - - /* - * Default interrupt handler. - * - * vecnum is where we'll put this code. - * c_routine is the C routine we'll call. - * - * The C routine is passed two arguments: - * - A pointer to the pt_regs state. - * - The interrupt vector number. - * - * The "processing" argument specifies the code for processing - * the interrupt. Defaults to "handle_interrupt". - */ - .macro int_hand vecnum, vecname, c_routine, processing=handle_interrupt - .org (\vecnum << 8) -intvec_\vecname: - .ifc \vecnum, INT_SWINT_1 - blz TREG_SYSCALL_NR_NAME, sys_cmpxchg - .endif - - /* Temporarily save a register so we have somewhere to work. */ - - mtspr SPR_SYSTEM_SAVE_K_1, r0 - mfspr r0, SPR_EX_CONTEXT_K_1 - - /* The cmpxchg code clears sp to force us to reset it here on fault. */ - { - bz sp, 2f - andi r0, r0, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */ - } - - .ifc \vecnum, INT_DOUBLE_FAULT - /* - * For double-faults from user-space, fall through to the normal - * register save and stack setup path. Otherwise, it's the - * hypervisor giving us one last chance to dump diagnostics, and we - * branch to the kernel_double_fault routine to do so. - */ - bz r0, 1f - j _kernel_double_fault -1: - .else - /* - * If we're coming from user-space, then set sp to the top of - * the kernel stack. Otherwise, assume sp is already valid. - */ - { - bnz r0, 0f - move r0, sp - } - .endif - - .ifc \c_routine, do_page_fault - /* - * The page_fault handler may be downcalled directly by the - * hypervisor even when Linux is running and has ICS set. - * - * In this case the contents of EX_CONTEXT_K_1 reflect the - * previous fault and can't be relied on to choose whether or - * not to reinitialize the stack pointer. So we add a test - * to see whether SYSTEM_SAVE_K_2 has the high bit set, - * and if so we don't reinitialize sp, since we must be coming - * from Linux. (In fact the precise case is !(val & ~1), - * but any Linux PC has to have the high bit set.) - * - * Note that the hypervisor *always* sets SYSTEM_SAVE_K_2 for - * any path that turns into a downcall to one of our TLB handlers. - */ - mfspr r0, SPR_SYSTEM_SAVE_K_2 - { - blz r0, 0f /* high bit in S_S_1_2 is for a PC to use */ - move r0, sp - } - .endif - -2: - /* - * SYSTEM_SAVE_K_0 holds the cpu number in the low bits, and - * the current stack top in the higher bits. So we recover - * our stack top by just masking off the low bits, then - * point sp at the top aligned address on the actual stack page. - */ - mfspr r0, SPR_SYSTEM_SAVE_K_0 - mm r0, r0, zero, LOG2_NR_CPU_IDS, 31 - -0: - /* - * Align the stack mod 64 so we can properly predict what - * cache lines we need to write-hint to reduce memory fetch - * latency as we enter the kernel. The layout of memory is - * as follows, with cache line 0 at the lowest VA, and cache - * line 4 just below the r0 value this "andi" computes. - * Note that we never write to cache line 4, and we skip - * cache line 1 for syscalls. - * - * cache line 4: ptregs padding (two words) - * cache line 3: r46...lr, pc, ex1, faultnum, orig_r0, flags, pad - * cache line 2: r30...r45 - * cache line 1: r14...r29 - * cache line 0: 2 x frame, r0..r13 - */ -#if STACK_TOP_DELTA != 64 -#error STACK_TOP_DELTA must be 64 for assumptions here and in task_pt_regs() -#endif - andi r0, r0, -64 - - /* - * Push the first four registers on the stack, so that we can set - * them to vector-unique values before we jump to the common code. - * - * Registers are pushed on the stack as a struct pt_regs, - * with the sp initially just above the struct, and when we're - * done, sp points to the base of the struct, minus - * C_ABI_SAVE_AREA_SIZE, so we can directly jal to C code. - * - * This routine saves just the first four registers, plus the - * stack context so we can do proper backtracing right away, - * and defers to handle_interrupt to save the rest. - * The backtracer needs pc, ex1, lr, sp, r52, and faultnum. - */ - addli r0, r0, PTREGS_OFFSET_LR - (PTREGS_SIZE + KSTK_PTREGS_GAP) - wh64 r0 /* cache line 3 */ - { - sw r0, lr - addli r0, r0, PTREGS_OFFSET_SP - PTREGS_OFFSET_LR - } - { - sw r0, sp - addli sp, r0, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_SP - } - { - sw sp, r52 - addli sp, sp, PTREGS_OFFSET_REG(1) - PTREGS_OFFSET_REG(52) - } - wh64 sp /* cache line 0 */ - { - sw sp, r1 - addli sp, sp, PTREGS_OFFSET_REG(2) - PTREGS_OFFSET_REG(1) - } - { - sw sp, r2 - addli sp, sp, PTREGS_OFFSET_REG(3) - PTREGS_OFFSET_REG(2) - } - { - sw sp, r3 - addli sp, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_REG(3) - } - mfspr r0, SPR_EX_CONTEXT_K_0 - .ifc \processing,handle_syscall - /* - * Bump the saved PC by one bundle so that when we return, we won't - * execute the same swint instruction again. We need to do this while - * we're in the critical section. - */ - addi r0, r0, 8 - .endif - { - sw sp, r0 - addli sp, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC - } - mfspr r0, SPR_EX_CONTEXT_K_1 - { - sw sp, r0 - addi sp, sp, PTREGS_OFFSET_FAULTNUM - PTREGS_OFFSET_EX1 - /* - * Use r0 for syscalls so it's a temporary; use r1 for interrupts - * so that it gets passed through unchanged to the handler routine. - * Note that the .if conditional confusingly spans bundles. - */ - .ifc \processing,handle_syscall - movei r0, \vecnum - } - { - sw sp, r0 - .else - movei r1, \vecnum - } - { - sw sp, r1 - .endif - addli sp, sp, PTREGS_OFFSET_REG(0) - PTREGS_OFFSET_FAULTNUM - } - mfspr r0, SPR_SYSTEM_SAVE_K_1 /* Original r0 */ - { - sw sp, r0 - addi sp, sp, -PTREGS_OFFSET_REG(0) - 4 - } - { - sw sp, zero /* write zero into "Next SP" frame pointer */ - addi sp, sp, -4 /* leave SP pointing at bottom of frame */ - } - .ifc \processing,handle_syscall - j handle_syscall - .else - /* - * Capture per-interrupt SPR context to registers. - * We overload the meaning of r3 on this path such that if its bit 31 - * is set, we have to mask all interrupts including NMIs before - * clearing the interrupt critical section bit. - * See discussion below at "finish_interrupt_save". - */ - .ifc \c_routine, do_page_fault - mfspr r2, SPR_SYSTEM_SAVE_K_3 /* address of page fault */ - mfspr r3, SPR_SYSTEM_SAVE_K_2 /* info about page fault */ - .else - .ifc \vecnum, INT_DOUBLE_FAULT - { - mfspr r2, SPR_SYSTEM_SAVE_K_2 /* double fault info from HV */ - movei r3, 0 - } - .else - .ifc \c_routine, do_trap - { - mfspr r2, GPV_REASON - movei r3, 0 - } - .else - .ifc \c_routine, handle_perf_interrupt - { - mfspr r2, PERF_COUNT_STS - movei r3, -1 /* not used, but set for consistency */ - } - .else - .ifc \c_routine, handle_perf_interrupt - { - mfspr r2, AUX_PERF_COUNT_STS - movei r3, -1 /* not used, but set for consistency */ - } - .else - movei r3, 0 - .endif - .endif - .endif - .endif - .endif - /* Put function pointer in r0 */ - moveli r0, lo16(\c_routine) - { - auli r0, r0, ha16(\c_routine) - j \processing - } - .endif - ENDPROC(intvec_\vecname) - -#ifdef __COLLECT_LINKER_FEEDBACK__ - .pushsection .text.intvec_feedback,"ax" - .org (\vecnum << 5) - FEEDBACK_ENTER_EXPLICIT(intvec_\vecname, .intrpt, 1 << 8) - jrp lr - .popsection -#endif - - .endm - - - /* - * Save the rest of the registers that we didn't save in the actual - * vector itself. We can't use r0-r10 inclusive here. - */ - .macro finish_interrupt_save, function - - /* If it's a syscall, save a proper orig_r0, otherwise just zero. */ - PTREGS_PTR(r52, PTREGS_OFFSET_ORIG_R0) - { - .ifc \function,handle_syscall - sw r52, r0 - .else - sw r52, zero - .endif - PTREGS_PTR(r52, PTREGS_OFFSET_TP) - } - - /* - * For ordinary syscalls, we save neither caller- nor callee- - * save registers, since the syscall invoker doesn't expect the - * caller-saves to be saved, and the called kernel functions will - * take care of saving the callee-saves for us. - * - * For interrupts we save just the caller-save registers. Saving - * them is required (since the "caller" can't save them). Again, - * the called kernel functions will restore the callee-save - * registers for us appropriately. - * - * On return, we normally restore nothing special for syscalls, - * and just the caller-save registers for interrupts. - * - * However, there are some important caveats to all this: - * - * - We always save a few callee-save registers to give us - * some scratchpad registers to carry across function calls. - * - * - fork/vfork/etc require us to save all the callee-save - * registers, which we do in PTREGS_SYSCALL_ALL_REGS, below. - * - * - We always save r0..r5 and r10 for syscalls, since we need - * to reload them a bit later for the actual kernel call, and - * since we might need them for -ERESTARTNOINTR, etc. - * - * - Before invoking a signal handler, we save the unsaved - * callee-save registers so they are visible to the - * signal handler or any ptracer. - * - * - If the unsaved callee-save registers are modified, we set - * a bit in pt_regs so we know to reload them from pt_regs - * and not just rely on the kernel function unwinding. - * (Done for ptrace register writes and SA_SIGINFO handler.) - */ - { - sw r52, tp - PTREGS_PTR(r52, PTREGS_OFFSET_REG(33)) - } - wh64 r52 /* cache line 2 */ - push_reg r33, r52 - push_reg r32, r52 - push_reg r31, r52 - .ifc \function,handle_syscall - push_reg r30, r52, PTREGS_OFFSET_SYSCALL - PTREGS_OFFSET_REG(30) - push_reg TREG_SYSCALL_NR_NAME, r52, \ - PTREGS_OFFSET_REG(5) - PTREGS_OFFSET_SYSCALL - .else - - push_reg r30, r52, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(30) - wh64 r52 /* cache line 1 */ - push_reg r29, r52 - push_reg r28, r52 - push_reg r27, r52 - push_reg r26, r52 - push_reg r25, r52 - push_reg r24, r52 - push_reg r23, r52 - push_reg r22, r52 - push_reg r21, r52 - push_reg r20, r52 - push_reg r19, r52 - push_reg r18, r52 - push_reg r17, r52 - push_reg r16, r52 - push_reg r15, r52 - push_reg r14, r52 - push_reg r13, r52 - push_reg r12, r52 - push_reg r11, r52 - push_reg r10, r52 - push_reg r9, r52 - push_reg r8, r52 - push_reg r7, r52 - push_reg r6, r52 - - .endif - - push_reg r5, r52 - sw r52, r4 - - /* Load tp with our per-cpu offset. */ -#ifdef CONFIG_SMP - { - mfspr r20, SPR_SYSTEM_SAVE_K_0 - moveli r21, lo16(__per_cpu_offset) - } - { - auli r21, r21, ha16(__per_cpu_offset) - mm r20, r20, zero, 0, LOG2_NR_CPU_IDS-1 - } - s2a r20, r20, r21 - lw tp, r20 -#else - move tp, zero -#endif - - /* - * If we will be returning to the kernel, we will need to - * reset the interrupt masks to the state they had before. - * Set DISABLE_IRQ in flags iff we came from PL1 with irqs disabled. - * We load flags in r32 here so we can jump to .Lrestore_regs - * directly after do_page_fault_ics() if necessary. - */ - mfspr r32, SPR_EX_CONTEXT_K_1 - { - andi r32, r32, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */ - PTREGS_PTR(r21, PTREGS_OFFSET_FLAGS) - } - bzt r32, 1f /* zero if from user space */ - IRQS_DISABLED(r32) /* zero if irqs enabled */ -#if PT_FLAGS_DISABLE_IRQ != 1 -# error Value of IRQS_DISABLED used to set PT_FLAGS_DISABLE_IRQ; fix -#endif -1: - .ifnc \function,handle_syscall - /* Record the fact that we saved the caller-save registers above. */ - ori r32, r32, PT_FLAGS_CALLER_SAVES - .endif - sw r21, r32 - -#ifdef __COLLECT_LINKER_FEEDBACK__ - /* - * Notify the feedback routines that we were in the - * appropriate fixed interrupt vector area. Note that we - * still have ICS set at this point, so we can't invoke any - * atomic operations or we will panic. The feedback - * routines internally preserve r0..r10 and r30 up. - */ - .ifnc \function,handle_syscall - shli r20, r1, 5 - .else - moveli r20, INT_SWINT_1 << 5 - .endif - addli r20, r20, lo16(intvec_feedback) - auli r20, r20, ha16(intvec_feedback) - jalr r20 - - /* And now notify the feedback routines that we are here. */ - FEEDBACK_ENTER(\function) -#endif - - /* - * we've captured enough state to the stack (including in - * particular our EX_CONTEXT state) that we can now release - * the interrupt critical section and replace it with our - * standard "interrupts disabled" mask value. This allows - * synchronous interrupts (and profile interrupts) to punch - * through from this point onwards. - * - * If bit 31 of r3 is set during a non-NMI interrupt, we know we - * are on the path where the hypervisor has punched through our - * ICS with a page fault, so we call out to do_page_fault_ics() - * to figure out what to do with it. If the fault was in - * an atomic op, we unlock the atomic lock, adjust the - * saved register state a little, and return "zero" in r4, - * falling through into the normal page-fault interrupt code. - * If the fault was in a kernel-space atomic operation, then - * do_page_fault_ics() resolves it itself, returns "one" in r4, - * and as a result goes directly to restoring registers and iret, - * without trying to adjust the interrupt masks at all. - * The do_page_fault_ics() API involves passing and returning - * a five-word struct (in registers) to avoid writing the - * save and restore code here. - */ - .ifc \function,handle_nmi - IRQ_DISABLE_ALL(r20) - .else - .ifnc \function,handle_syscall - bgezt r3, 1f - { - PTREGS_PTR(r0, PTREGS_OFFSET_BASE) - jal do_page_fault_ics - } - FEEDBACK_REENTER(\function) - bzt r4, 1f - j .Lrestore_regs -1: - .endif - IRQ_DISABLE(r20, r21) - .endif - mtspr INTERRUPT_CRITICAL_SECTION, zero - - /* - * Prepare the first 256 stack bytes to be rapidly accessible - * without having to fetch the background data. We don't really - * know how far to write-hint, but kernel stacks generally - * aren't that big, and write-hinting here does take some time. - */ - addi r52, sp, -64 - { - wh64 r52 - addi r52, r52, -64 - } - { - wh64 r52 - addi r52, r52, -64 - } - { - wh64 r52 - addi r52, r52, -64 - } - wh64 r52 - -#if defined(CONFIG_TRACE_IRQFLAGS) || defined(CONFIG_CONTEXT_TRACKING) - .ifnc \function,handle_nmi - /* - * We finally have enough state set up to notify the irq - * tracing code that irqs were disabled on entry to the handler. - * The TRACE_IRQS_OFF call clobbers registers r0-r29. - * For syscalls, we already have the register state saved away - * on the stack, so we don't bother to do any register saves here, - * and later we pop the registers back off the kernel stack. - * For interrupt handlers, save r0-r3 in callee-saved registers. - */ - .ifnc \function,handle_syscall - { move r30, r0; move r31, r1 } - { move r32, r2; move r33, r3 } - .endif - TRACE_IRQS_OFF -#ifdef CONFIG_CONTEXT_TRACKING - jal context_tracking_user_exit -#endif - .ifnc \function,handle_syscall - { move r0, r30; move r1, r31 } - { move r2, r32; move r3, r33 } - .endif - .endif -#endif - - .endm - - .macro check_single_stepping, kind, not_single_stepping - /* - * Check for single stepping in user-level priv - * kind can be "normal", "ill", or "syscall" - * At end, if fall-thru - * r29: thread_info->step_state - * r28: &pt_regs->pc - * r27: pt_regs->pc - * r26: thread_info->step_state->buffer - */ - - /* Check for single stepping */ - GET_THREAD_INFO(r29) - { - /* Get pointer to field holding step state */ - addi r29, r29, THREAD_INFO_STEP_STATE_OFFSET - - /* Get pointer to EX1 in register state */ - PTREGS_PTR(r27, PTREGS_OFFSET_EX1) - } - { - /* Get pointer to field holding PC */ - PTREGS_PTR(r28, PTREGS_OFFSET_PC) - - /* Load the pointer to the step state */ - lw r29, r29 - } - /* Load EX1 */ - lw r27, r27 - { - /* Points to flags */ - addi r23, r29, SINGLESTEP_STATE_FLAGS_OFFSET - - /* No single stepping if there is no step state structure */ - bzt r29, \not_single_stepping - } - { - /* mask off ICS and any other high bits */ - andi r27, r27, SPR_EX_CONTEXT_1_1__PL_MASK - - /* Load pointer to single step instruction buffer */ - lw r26, r29 - } - /* Check priv state */ - bnz r27, \not_single_stepping - - /* Get flags */ - lw r22, r23 - { - /* Branch if single-step mode not enabled */ - bbnst r22, \not_single_stepping - - /* Clear enabled flag */ - andi r22, r22, ~SINGLESTEP_STATE_MASK_IS_ENABLED - } - .ifc \kind,normal - { - /* Load PC */ - lw r27, r28 - - /* Point to the entry containing the original PC */ - addi r24, r29, SINGLESTEP_STATE_ORIG_PC_OFFSET - } - { - /* Disable single stepping flag */ - sw r23, r22 - } - { - /* Get the original pc */ - lw r24, r24 - - /* See if the PC is at the start of the single step buffer */ - seq r25, r26, r27 - } - /* - * NOTE: it is really expected that the PC be in the single step buffer - * at this point - */ - bzt r25, \not_single_stepping - - /* Restore the original PC */ - sw r28, r24 - .else - .ifc \kind,syscall - { - /* Load PC */ - lw r27, r28 - - /* Point to the entry containing the next PC */ - addi r24, r29, SINGLESTEP_STATE_NEXT_PC_OFFSET - } - { - /* Increment the stopped PC by the bundle size */ - addi r26, r26, 8 - - /* Disable single stepping flag */ - sw r23, r22 - } - { - /* Get the next pc */ - lw r24, r24 - - /* - * See if the PC is one bundle past the start of the - * single step buffer - */ - seq r25, r26, r27 - } - { - /* - * NOTE: it is really expected that the PC be in the - * single step buffer at this point - */ - bzt r25, \not_single_stepping - } - /* Set to the next PC */ - sw r28, r24 - .else - { - /* Point to 3rd bundle in buffer */ - addi r25, r26, 16 - - /* Load PC */ - lw r27, r28 - } - { - /* Disable single stepping flag */ - sw r23, r22 - - /* See if the PC is in the single step buffer */ - slte_u r24, r26, r27 - } - { - slte_u r25, r27, r25 - - /* - * NOTE: it is really expected that the PC be in the - * single step buffer at this point - */ - bzt r24, \not_single_stepping - } - bzt r25, \not_single_stepping - .endif - .endif - .endm - - /* - * Redispatch a downcall. - */ - .macro dc_dispatch vecnum, vecname - .org (\vecnum << 8) -intvec_\vecname: - j _hv_downcall_dispatch - ENDPROC(intvec_\vecname) - .endm - - /* - * Common code for most interrupts. The C function we're eventually - * going to is in r0, and the faultnum is in r1; the original - * values for those registers are on the stack. - */ - .pushsection .text.handle_interrupt,"ax" -handle_interrupt: - finish_interrupt_save handle_interrupt - - /* - * Check for if we are single stepping in user level. If so, then - * we need to restore the PC. - */ - - check_single_stepping normal, .Ldispatch_interrupt -.Ldispatch_interrupt: - - /* Jump to the C routine; it should enable irqs as soon as possible. */ - { - jalr r0 - PTREGS_PTR(r0, PTREGS_OFFSET_BASE) - } - FEEDBACK_REENTER(handle_interrupt) - { - movei r30, 0 /* not an NMI */ - j interrupt_return - } - STD_ENDPROC(handle_interrupt) - -/* - * This routine takes a boolean in r30 indicating if this is an NMI. - * If so, we also expect a boolean in r31 indicating whether to - * re-enable the oprofile interrupts. - * - * Note that .Lresume_userspace is jumped to directly in several - * places, and we need to make sure r30 is set correctly in those - * callers as well. - */ -STD_ENTRY(interrupt_return) - /* If we're resuming to kernel space, don't check thread flags. */ - { - bnz r30, .Lrestore_all /* NMIs don't special-case user-space */ - PTREGS_PTR(r29, PTREGS_OFFSET_EX1) - } - lw r29, r29 - andi r29, r29, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */ - bzt r29, .Lresume_userspace - -#ifdef CONFIG_PREEMPT - /* Returning to kernel space. Check if we need preemption. */ - GET_THREAD_INFO(r29) - addli r28, r29, THREAD_INFO_FLAGS_OFFSET - { - lw r28, r28 - addli r29, r29, THREAD_INFO_PREEMPT_COUNT_OFFSET - } - { - andi r28, r28, _TIF_NEED_RESCHED - lw r29, r29 - } - bzt r28, 1f - bnz r29, 1f - /* Disable interrupts explicitly for preemption. */ - IRQ_DISABLE(r20,r21) - TRACE_IRQS_OFF - jal preempt_schedule_irq - FEEDBACK_REENTER(interrupt_return) -1: -#endif - - /* If we're resuming to _cpu_idle_nap, bump PC forward by 8. */ - { - PTREGS_PTR(r29, PTREGS_OFFSET_PC) - moveli r27, lo16(_cpu_idle_nap) - } - { - lw r28, r29 - auli r27, r27, ha16(_cpu_idle_nap) - } - { - seq r27, r27, r28 - } - { - bbns r27, .Lrestore_all - addi r28, r28, 8 - } - sw r29, r28 - j .Lrestore_all - -.Lresume_userspace: - FEEDBACK_REENTER(interrupt_return) - - /* - * Disable interrupts so as to make sure we don't - * miss an interrupt that sets any of the thread flags (like - * need_resched or sigpending) between sampling and the iret. - * Routines like schedule() or do_signal() may re-enable - * interrupts before returning. - */ - IRQ_DISABLE(r20, r21) - TRACE_IRQS_OFF /* Note: clobbers registers r0-r29 */ - - /* - * See if there are any work items (including single-shot items) - * to do. If so, save the callee-save registers to pt_regs - * and then dispatch to C code. - */ - GET_THREAD_INFO(r21) - { - addi r22, r21, THREAD_INFO_FLAGS_OFFSET - moveli r20, lo16(_TIF_ALLWORK_MASK) - } - { - lw r22, r22 - auli r20, r20, ha16(_TIF_ALLWORK_MASK) - } - and r1, r22, r20 - { - PTREGS_PTR(r0, PTREGS_OFFSET_BASE) - bzt r1, .Lrestore_all - } - push_extra_callee_saves r0 - jal prepare_exit_to_usermode - - /* - * In the NMI case we - * omit the call to single_process_check_nohz, which normally checks - * to see if we should start or stop the scheduler tick, because - * we can't call arbitrary Linux code from an NMI context. - * We always call the homecache TLB deferral code to re-trigger - * the deferral mechanism. - * - * The other chunk of responsibility this code has is to reset the - * interrupt masks appropriately to reset irqs and NMIs. We have - * to call TRACE_IRQS_OFF and TRACE_IRQS_ON to support all the - * lockdep-type stuff, but we can't set ICS until afterwards, since - * ICS can only be used in very tight chunks of code to avoid - * tripping over various assertions that it is off. - * - * (There is what looks like a window of vulnerability here since - * we might take a profile interrupt between the two SPR writes - * that set the mask, but since we write the low SPR word first, - * and our interrupt entry code checks the low SPR word, any - * profile interrupt will actually disable interrupts in both SPRs - * before returning, which is OK.) - */ -.Lrestore_all: - PTREGS_PTR(r0, PTREGS_OFFSET_EX1) - { - lw r0, r0 - PTREGS_PTR(r32, PTREGS_OFFSET_FLAGS) - } - { - andi r0, r0, SPR_EX_CONTEXT_1_1__PL_MASK - lw r32, r32 - } - bnz r0, 1f - j 2f -#if PT_FLAGS_DISABLE_IRQ != 1 -# error Assuming PT_FLAGS_DISABLE_IRQ == 1 so we can use bbnst below -#endif -1: bbnst r32, 2f - IRQ_DISABLE(r20,r21) - TRACE_IRQS_OFF - movei r0, 1 - mtspr INTERRUPT_CRITICAL_SECTION, r0 - bzt r30, .Lrestore_regs - j 3f -2: TRACE_IRQS_ON - movei r0, 1 - mtspr INTERRUPT_CRITICAL_SECTION, r0 - IRQ_ENABLE(r20, r21) - bzt r30, .Lrestore_regs -3: - - /* We are relying on INT_PERF_COUNT at 33, and AUX_PERF_COUNT at 48 */ - { - moveli r0, lo16(1 << (INT_PERF_COUNT - 32)) - bz r31, .Lrestore_regs - } - auli r0, r0, ha16(1 << (INT_AUX_PERF_COUNT - 32)) - mtspr SPR_INTERRUPT_MASK_RESET_K_1, r0 - - /* - * We now commit to returning from this interrupt, since we will be - * doing things like setting EX_CONTEXT SPRs and unwinding the stack - * frame. No calls should be made to any other code after this point. - * This code should only be entered with ICS set. - * r32 must still be set to ptregs.flags. - * We launch loads to each cache line separately first, so we can - * get some parallelism out of the memory subsystem. - * We start zeroing caller-saved registers throughout, since - * that will save some cycles if this turns out to be a syscall. - */ -.Lrestore_regs: - FEEDBACK_REENTER(interrupt_return) /* called from elsewhere */ - - /* - * Rotate so we have one high bit and one low bit to test. - * - low bit says whether to restore all the callee-saved registers, - * or just r30-r33, and r52 up. - * - high bit (i.e. sign bit) says whether to restore all the - * caller-saved registers, or just r0. - */ -#if PT_FLAGS_CALLER_SAVES != 2 || PT_FLAGS_RESTORE_REGS != 4 -# error Rotate trick does not work :-) -#endif - { - rli r20, r32, 30 - PTREGS_PTR(sp, PTREGS_OFFSET_REG(0)) - } - - /* - * Load cache lines 0, 2, and 3 in that order, then use - * the last loaded value, which makes it likely that the other - * cache lines have also loaded, at which point we should be - * able to safely read all the remaining words on those cache - * lines without waiting for the memory subsystem. - */ - pop_reg_zero r0, r28, sp, PTREGS_OFFSET_REG(30) - PTREGS_OFFSET_REG(0) - pop_reg_zero r30, r2, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_REG(30) - pop_reg_zero r21, r3, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC - pop_reg_zero lr, r4, sp, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_EX1 - { - mtspr SPR_EX_CONTEXT_K_0, r21 - move r5, zero - } - { - mtspr SPR_EX_CONTEXT_K_1, lr - andi lr, lr, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */ - } - - /* Restore callee-saveds that we actually use. */ - pop_reg_zero r52, r6, sp, PTREGS_OFFSET_REG(31) - PTREGS_OFFSET_REG(52) - pop_reg_zero r31, r7 - pop_reg_zero r32, r8 - pop_reg_zero r33, r9, sp, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(33) - - /* - * If we modified other callee-saveds, restore them now. - * This is rare, but could be via ptrace or signal handler. - */ - { - move r10, zero - bbs r20, .Lrestore_callees - } -.Lcontinue_restore_regs: - - /* Check if we're returning from a syscall. */ - { - move r11, zero - blzt r20, 1f /* no, so go restore callee-save registers */ - } - - /* - * Check if we're returning to userspace. - * Note that if we're not, we don't worry about zeroing everything. - */ - { - addli sp, sp, PTREGS_OFFSET_LR - PTREGS_OFFSET_REG(29) - bnz lr, .Lkernel_return - } - - /* - * On return from syscall, we've restored r0 from pt_regs, but we - * clear the remainder of the caller-saved registers. We could - * restore the syscall arguments, but there's not much point, - * and it ensures user programs aren't trying to use the - * caller-saves if we clear them, as well as avoiding leaking - * kernel pointers into userspace. - */ - pop_reg_zero lr, r12, sp, PTREGS_OFFSET_TP - PTREGS_OFFSET_LR - pop_reg_zero tp, r13, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_TP - { - lw sp, sp - move r14, zero - move r15, zero - } - { move r16, zero; move r17, zero } - { move r18, zero; move r19, zero } - { move r20, zero; move r21, zero } - { move r22, zero; move r23, zero } - { move r24, zero; move r25, zero } - { move r26, zero; move r27, zero } - - /* Set r1 to errno if we are returning an error, otherwise zero. */ - { - moveli r29, 4096 - sub r1, zero, r0 - } - slt_u r29, r1, r29 - { - mnz r1, r29, r1 - move r29, zero - } - iret - - /* - * Not a syscall, so restore caller-saved registers. - * First kick off a load for cache line 1, which we're touching - * for the first time here. - */ - .align 64 -1: pop_reg r29, sp, PTREGS_OFFSET_REG(1) - PTREGS_OFFSET_REG(29) - pop_reg r1 - pop_reg r2 - pop_reg r3 - pop_reg r4 - pop_reg r5 - pop_reg r6 - pop_reg r7 - pop_reg r8 - pop_reg r9 - pop_reg r10 - pop_reg r11 - pop_reg r12 - pop_reg r13 - pop_reg r14 - pop_reg r15 - pop_reg r16 - pop_reg r17 - pop_reg r18 - pop_reg r19 - pop_reg r20 - pop_reg r21 - pop_reg r22 - pop_reg r23 - pop_reg r24 - pop_reg r25 - pop_reg r26 - pop_reg r27 - pop_reg r28, sp, PTREGS_OFFSET_LR - PTREGS_OFFSET_REG(28) - /* r29 already restored above */ - bnz lr, .Lkernel_return - pop_reg lr, sp, PTREGS_OFFSET_TP - PTREGS_OFFSET_LR - pop_reg tp, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_TP - lw sp, sp - iret - - /* - * We can't restore tp when in kernel mode, since a thread might - * have migrated from another cpu and brought a stale tp value. - */ -.Lkernel_return: - pop_reg lr, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_LR - lw sp, sp - iret - - /* Restore callee-saved registers from r34 to r51. */ -.Lrestore_callees: - addli sp, sp, PTREGS_OFFSET_REG(34) - PTREGS_OFFSET_REG(29) - pop_reg r34 - pop_reg r35 - pop_reg r36 - pop_reg r37 - pop_reg r38 - pop_reg r39 - pop_reg r40 - pop_reg r41 - pop_reg r42 - pop_reg r43 - pop_reg r44 - pop_reg r45 - pop_reg r46 - pop_reg r47 - pop_reg r48 - pop_reg r49 - pop_reg r50 - pop_reg r51, sp, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(51) - j .Lcontinue_restore_regs - STD_ENDPROC(interrupt_return) - - /* - * Some interrupts don't check for single stepping - */ - .pushsection .text.handle_interrupt_no_single_step,"ax" -handle_interrupt_no_single_step: - finish_interrupt_save handle_interrupt_no_single_step - { - jalr r0 - PTREGS_PTR(r0, PTREGS_OFFSET_BASE) - } - FEEDBACK_REENTER(handle_interrupt_no_single_step) - { - movei r30, 0 /* not an NMI */ - j interrupt_return - } - STD_ENDPROC(handle_interrupt_no_single_step) - - /* - * "NMI" interrupts mask ALL interrupts before calling the - * handler, and don't check thread flags, etc., on the way - * back out. In general, the only things we do here for NMIs - * are the register save/restore, fixing the PC if we were - * doing single step, and the dataplane kernel-TLB management. - * We don't (for example) deal with start/stop of the sched tick. - */ - .pushsection .text.handle_nmi,"ax" -handle_nmi: - finish_interrupt_save handle_nmi - check_single_stepping normal, .Ldispatch_nmi -.Ldispatch_nmi: - { - jalr r0 - PTREGS_PTR(r0, PTREGS_OFFSET_BASE) - } - FEEDBACK_REENTER(handle_nmi) - { - movei r30, 1 - seq r31, r0, zero - } - j interrupt_return - STD_ENDPROC(handle_nmi) - - /* - * Parallel code for syscalls to handle_interrupt. - */ - .pushsection .text.handle_syscall,"ax" -handle_syscall: - finish_interrupt_save handle_syscall - - /* - * Check for if we are single stepping in user level. If so, then - * we need to restore the PC. - */ - check_single_stepping syscall, .Ldispatch_syscall -.Ldispatch_syscall: - - /* Enable irqs. */ - TRACE_IRQS_ON - IRQ_ENABLE(r20, r21) - - /* Bump the counter for syscalls made on this tile. */ - moveli r20, lo16(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET) - auli r20, r20, ha16(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET) - add r20, r20, tp - lw r21, r20 - addi r21, r21, 1 - { - sw r20, r21 - GET_THREAD_INFO(r31) - } - - /* Trace syscalls, if requested. */ - addi r31, r31, THREAD_INFO_FLAGS_OFFSET - lw r30, r31 - andi r30, r30, _TIF_SYSCALL_TRACE - bzt r30, .Lrestore_syscall_regs - { - PTREGS_PTR(r0, PTREGS_OFFSET_BASE) - jal do_syscall_trace_enter - } - FEEDBACK_REENTER(handle_syscall) - blz r0, .Lsyscall_sigreturn_skip - - /* - * We always reload our registers from the stack at this - * point. They might be valid, if we didn't build with - * TRACE_IRQFLAGS, and this isn't a dataplane tile, and we're not - * doing syscall tracing, but there are enough cases now that it - * seems simplest just to do the reload unconditionally. - */ -.Lrestore_syscall_regs: - PTREGS_PTR(r11, PTREGS_OFFSET_REG(0)) - pop_reg r0, r11 - pop_reg r1, r11 - pop_reg r2, r11 - pop_reg r3, r11 - pop_reg r4, r11 - pop_reg r5, r11, PTREGS_OFFSET_SYSCALL - PTREGS_OFFSET_REG(5) - pop_reg TREG_SYSCALL_NR_NAME, r11 - - /* Ensure that the syscall number is within the legal range. */ - moveli r21, __NR_syscalls - { - slt_u r21, TREG_SYSCALL_NR_NAME, r21 - moveli r20, lo16(sys_call_table) - } - { - bbns r21, .Linvalid_syscall - auli r20, r20, ha16(sys_call_table) - } - s2a r20, TREG_SYSCALL_NR_NAME, r20 - lw r20, r20 - - /* Jump to syscall handler. */ - jalr r20 -.Lhandle_syscall_link: /* value of "lr" after "jalr r20" above */ - - /* - * Write our r0 onto the stack so it gets restored instead - * of whatever the user had there before. - */ - PTREGS_PTR(r29, PTREGS_OFFSET_REG(0)) - sw r29, r0 - -.Lsyscall_sigreturn_skip: - FEEDBACK_REENTER(handle_syscall) - - /* Do syscall trace again, if requested. */ - lw r30, r31 - andi r30, r30, _TIF_SYSCALL_TRACE - bzt r30, 1f - { - PTREGS_PTR(r0, PTREGS_OFFSET_BASE) - jal do_syscall_trace_exit - } - FEEDBACK_REENTER(handle_syscall) -1: { - movei r30, 0 /* not an NMI */ - j .Lresume_userspace /* jump into middle of interrupt_return */ - } - -.Linvalid_syscall: - /* Report an invalid syscall back to the user program */ - { - PTREGS_PTR(r29, PTREGS_OFFSET_REG(0)) - movei r28, -ENOSYS - } - sw r29, r28 - { - movei r30, 0 /* not an NMI */ - j .Lresume_userspace /* jump into middle of interrupt_return */ - } - STD_ENDPROC(handle_syscall) - - /* Return the address for oprofile to suppress in backtraces. */ -STD_ENTRY_SECTION(handle_syscall_link_address, .text.handle_syscall) - lnk r0 - { - addli r0, r0, .Lhandle_syscall_link - . - jrp lr - } - STD_ENDPROC(handle_syscall_link_address) - -STD_ENTRY(ret_from_fork) - jal sim_notify_fork - jal schedule_tail - FEEDBACK_REENTER(ret_from_fork) - { - movei r30, 0 /* not an NMI */ - j .Lresume_userspace /* jump into middle of interrupt_return */ - } - STD_ENDPROC(ret_from_fork) - -STD_ENTRY(ret_from_kernel_thread) - jal sim_notify_fork - jal schedule_tail - FEEDBACK_REENTER(ret_from_fork) - { - move r0, r31 - jalr r30 - } - FEEDBACK_REENTER(ret_from_kernel_thread) - { - movei r30, 0 /* not an NMI */ - j interrupt_return - } - STD_ENDPROC(ret_from_kernel_thread) - - /* - * Code for ill interrupt. - */ - .pushsection .text.handle_ill,"ax" -handle_ill: - finish_interrupt_save handle_ill - - /* - * Check for if we are single stepping in user level. If so, then - * we need to restore the PC. - */ - check_single_stepping ill, .Ldispatch_normal_ill - - { - /* See if the PC is the 1st bundle in the buffer */ - seq r25, r27, r26 - - /* Point to the 2nd bundle in the buffer */ - addi r26, r26, 8 - } - { - /* Point to the original pc */ - addi r24, r29, SINGLESTEP_STATE_ORIG_PC_OFFSET - - /* Branch if the PC is the 1st bundle in the buffer */ - bnz r25, 3f - } - { - /* See if the PC is the 2nd bundle of the buffer */ - seq r25, r27, r26 - - /* Set PC to next instruction */ - addi r24, r29, SINGLESTEP_STATE_NEXT_PC_OFFSET - } - { - /* Point to flags */ - addi r25, r29, SINGLESTEP_STATE_FLAGS_OFFSET - - /* Branch if PC is in the second bundle */ - bz r25, 2f - } - /* Load flags */ - lw r25, r25 - { - /* - * Get the offset for the register to restore - * Note: the lower bound is 2, so we have implicit scaling by 4. - * No multiplication of the register number by the size of a register - * is needed. - */ - mm r27, r25, zero, SINGLESTEP_STATE_TARGET_LB, \ - SINGLESTEP_STATE_TARGET_UB - - /* Mask Rewrite_LR */ - andi r25, r25, SINGLESTEP_STATE_MASK_UPDATE - } - { - addi r29, r29, SINGLESTEP_STATE_UPDATE_VALUE_OFFSET - - /* Don't rewrite temp register */ - bz r25, 3f - } - { - /* Get the temp value */ - lw r29, r29 - - /* Point to where the register is stored */ - add r27, r27, sp - } - - /* Add in the C ABI save area size to the register offset */ - addi r27, r27, C_ABI_SAVE_AREA_SIZE - - /* Restore the user's register with the temp value */ - sw r27, r29 - j 3f - -2: - /* Must be in the third bundle */ - addi r24, r29, SINGLESTEP_STATE_BRANCH_NEXT_PC_OFFSET - -3: - /* set PC and continue */ - lw r26, r24 - { - sw r28, r26 - GET_THREAD_INFO(r0) - } - - /* - * Clear TIF_SINGLESTEP to prevent recursion if we execute an ill. - * The normal non-arch flow redundantly clears TIF_SINGLESTEP, but we - * need to clear it here and can't really impose on all other arches. - * So what's another write between friends? - */ - - addi r1, r0, THREAD_INFO_FLAGS_OFFSET - { - lw r2, r1 - addi r0, r0, THREAD_INFO_TASK_OFFSET /* currently a no-op */ - } - andi r2, r2, ~_TIF_SINGLESTEP - sw r1, r2 - - /* Issue a sigtrap */ - { - lw r0, r0 /* indirect thru thread_info to get task_info*/ - addi r1, sp, C_ABI_SAVE_AREA_SIZE /* put ptregs pointer into r1 */ - } - - jal send_sigtrap /* issue a SIGTRAP */ - FEEDBACK_REENTER(handle_ill) - { - movei r30, 0 /* not an NMI */ - j .Lresume_userspace /* jump into middle of interrupt_return */ - } - -.Ldispatch_normal_ill: - { - jalr r0 - PTREGS_PTR(r0, PTREGS_OFFSET_BASE) - } - FEEDBACK_REENTER(handle_ill) - { - movei r30, 0 /* not an NMI */ - j interrupt_return - } - STD_ENDPROC(handle_ill) - -/* Various stub interrupt handlers and syscall handlers */ - -STD_ENTRY_LOCAL(_kernel_double_fault) - mfspr r1, SPR_EX_CONTEXT_K_0 - move r2, lr - move r3, sp - move r4, r52 - addi sp, sp, -C_ABI_SAVE_AREA_SIZE - j kernel_double_fault - STD_ENDPROC(_kernel_double_fault) - -STD_ENTRY_LOCAL(bad_intr) - mfspr r2, SPR_EX_CONTEXT_K_0 - panic "Unhandled interrupt %#x: PC %#lx" - STD_ENDPROC(bad_intr) - -/* - * Special-case sigreturn to not write r0 to the stack on return. - * This is technically more efficient, but it also avoids difficulties - * in the 64-bit OS when handling 32-bit compat code, since we must not - * sign-extend r0 for the sigreturn return-value case. - */ -#define PTREGS_SYSCALL_SIGRETURN(x, reg) \ - STD_ENTRY(_##x); \ - addli lr, lr, .Lsyscall_sigreturn_skip - .Lhandle_syscall_link; \ - { \ - PTREGS_PTR(reg, PTREGS_OFFSET_BASE); \ - j x \ - }; \ - STD_ENDPROC(_##x) - -PTREGS_SYSCALL_SIGRETURN(sys_rt_sigreturn, r0) - -/* Save additional callee-saves to pt_regs and jump to standard function. */ -STD_ENTRY(_sys_clone) - push_extra_callee_saves r4 - j sys_clone - STD_ENDPROC(_sys_clone) - -/* - * This entrypoint is taken for the cmpxchg and atomic_update fast - * swints. We may wish to generalize it to other fast swints at some - * point, but for now there are just two very similar ones, which - * makes it faster. - * - * The fast swint code is designed to have a small footprint. It does - * not save or restore any GPRs, counting on the caller-save registers - * to be available to it on entry. It does not modify any callee-save - * registers (including "lr"). It does not check what PL it is being - * called at, so you'd better not call it other than at PL0. - * The <atomic.h> wrapper assumes it only clobbers r20-r29, so if - * it ever is necessary to use more registers, be aware. - * - * It does not use the stack, but since it might be re-interrupted by - * a page fault which would assume the stack was valid, it does - * save/restore the stack pointer and zero it out to make sure it gets reset. - * Since we always keep interrupts disabled, the hypervisor won't - * clobber our EX_CONTEXT_K_x registers, so we don't save/restore them - * (other than to advance the PC on return). - * - * We have to manually validate the user vs kernel address range - * (since at PL1 we can read/write both), and for performance reasons - * we don't allow cmpxchg on the fc000000 memory region, since we only - * validate that the user address is below PAGE_OFFSET. - * - * We place it in the __HEAD section to ensure it is relatively - * near to the intvec_SWINT_1 code (reachable by a conditional branch). - * - * Our use of ATOMIC_LOCK_REG here must match do_page_fault_ics(). - * - * As we do in lib/atomic_asm_32.S, we bypass a store if the value we - * would store is the same as the value we just loaded. - */ - __HEAD - .align 64 - /* Align much later jump on the start of a cache line. */ - nop -#if PAGE_SIZE >= 0x10000 - nop -#endif -ENTRY(sys_cmpxchg) - - /* - * Save "sp" and set it zero for any possible page fault. - * - * HACK: We want to both zero sp and check r0's alignment, - * so we do both at once. If "sp" becomes nonzero we - * know r0 is unaligned and branch to the error handler that - * restores sp, so this is OK. - * - * ICS is disabled right now so having a garbage but nonzero - * sp is OK, since we won't execute any faulting instructions - * when it is nonzero. - */ - { - move r27, sp - andi sp, r0, 3 - } - - /* - * Get the lock address in ATOMIC_LOCK_REG, and also validate that the - * address is less than PAGE_OFFSET, since that won't trap at PL1. - * We only use bits less than PAGE_SHIFT to avoid having to worry - * about aliasing among multiple mappings of the same physical page, - * and we ignore the low 3 bits so we have one lock that covers - * both a cmpxchg64() and a cmpxchg() on either its low or high word. - * NOTE: this must match __atomic_hashed_lock() in lib/atomic_32.c. - */ - -#if (PAGE_OFFSET & 0xffff) != 0 -# error Code here assumes PAGE_OFFSET can be loaded with just hi16() -#endif - - { - /* Check for unaligned input. */ - bnz sp, .Lcmpxchg_badaddr - auli r23, zero, hi16(PAGE_OFFSET) /* hugepage-aligned */ - } - { - /* - * Slide bits into position for 'mm'. We want to ignore - * the low 3 bits of r0, and consider only the next - * ATOMIC_HASH_SHIFT bits. - * Because of C pointer arithmetic, we want to compute this: - * - * ((char*)atomic_locks + - * (((r0 >> 3) & ((1 << ATOMIC_HASH_SHIFT) - 1)) << 2)) - * - * Instead of two shifts we just ">> 1", and use 'mm' - * to ignore the low and high bits we don't want. - */ - shri r25, r0, 1 - - slt_u r23, r0, r23 - - /* - * Ensure that the TLB is loaded before we take out the lock. - * This will start fetching the value all the way into our L1 - * as well (and if it gets modified before we grab the lock, - * it will be invalidated from our cache before we reload it). - */ - lw r26, r0 - } - { - auli r21, zero, ha16(atomic_locks) - - bbns r23, .Lcmpxchg_badaddr - } -#if PAGE_SIZE < 0x10000 - /* atomic_locks is page-aligned so for big pages we don't need this. */ - addli r21, r21, lo16(atomic_locks) -#endif - { - /* - * Insert the hash bits into the page-aligned pointer. - * ATOMIC_HASH_SHIFT is so big that we don't actually hash - * the unmasked address bits, as that may cause unnecessary - * collisions. - */ - mm ATOMIC_LOCK_REG_NAME, r25, r21, 2, (ATOMIC_HASH_SHIFT + 2) - 1 - - seqi r23, TREG_SYSCALL_NR_NAME, __NR_FAST_cmpxchg64 - } - { - /* Branch away at this point if we're doing a 64-bit cmpxchg. */ - bbs r23, .Lcmpxchg64 - andi r23, r0, 7 /* Precompute alignment for cmpxchg64. */ - } - { - /* - * We very carefully align the code that actually runs with - * the lock held (twelve bundles) so that we know it is all in - * the icache when we start. This instruction (the jump) is - * at the start of the first cache line, address zero mod 64; - * we jump to the very end of the second cache line to get that - * line loaded in the icache, then fall through to issue the tns - * in the third cache line, at which point it's all cached. - * Note that is for performance, not correctness. - */ - j .Lcmpxchg32_tns - } - -/* Symbol for do_page_fault_ics() to use to compare against the PC. */ -.global __sys_cmpxchg_grab_lock -__sys_cmpxchg_grab_lock: - - /* - * Perform the actual cmpxchg or atomic_update. - */ -.Ldo_cmpxchg32: - { - lw r21, r0 - seqi r23, TREG_SYSCALL_NR_NAME, __NR_FAST_atomic_update - move r24, r2 - } - { - seq r22, r21, r1 /* See if cmpxchg matches. */ - and r25, r21, r1 /* If atomic_update, compute (*mem & mask) */ - } - { - or r22, r22, r23 /* Skip compare branch for atomic_update. */ - add r25, r25, r2 /* Compute (*mem & mask) + addend. */ - } - { - mvnz r24, r23, r25 /* Use atomic_update value if appropriate. */ - bbns r22, .Lcmpxchg32_nostore - } - seq r22, r24, r21 /* Are we storing the value we loaded? */ - bbs r22, .Lcmpxchg32_nostore - sw r0, r24 - - /* The following instruction is the start of the second cache line. */ - /* Do slow mtspr here so the following "mf" waits less. */ - { - move sp, r27 - mtspr SPR_EX_CONTEXT_K_0, r28 - } - mf - - { - move r0, r21 - sw ATOMIC_LOCK_REG_NAME, zero - } - iret - - /* Duplicated code here in the case where we don't overlap "mf" */ -.Lcmpxchg32_nostore: - { - move r0, r21 - sw ATOMIC_LOCK_REG_NAME, zero - } - { - move sp, r27 - mtspr SPR_EX_CONTEXT_K_0, r28 - } - iret - - /* - * The locking code is the same for 32-bit cmpxchg/atomic_update, - * and for 64-bit cmpxchg. We provide it as a macro and put - * it into both versions. We can't share the code literally - * since it depends on having the right branch-back address. - */ - .macro cmpxchg_lock, bitwidth - - /* Lock; if we succeed, jump back up to the read-modify-write. */ -#ifdef CONFIG_SMP - tns r21, ATOMIC_LOCK_REG_NAME -#else - /* - * Non-SMP preserves all the lock infrastructure, to keep the - * code simpler for the interesting (SMP) case. However, we do - * one small optimization here and in atomic_asm.S, which is - * to fake out acquiring the actual lock in the atomic_lock table. - */ - movei r21, 0 -#endif - - /* Issue the slow SPR here while the tns result is in flight. */ - mfspr r28, SPR_EX_CONTEXT_K_0 - - { - addi r28, r28, 8 /* return to the instruction after the swint1 */ - bzt r21, .Ldo_cmpxchg\bitwidth - } - /* - * The preceding instruction is the last thing that must be - * hot in the icache before we do the "tns" above. - */ - -#ifdef CONFIG_SMP - /* - * We failed to acquire the tns lock on our first try. Now use - * bounded exponential backoff to retry, like __atomic_spinlock(). - */ - { - moveli r23, 2048 /* maximum backoff time in cycles */ - moveli r25, 32 /* starting backoff time in cycles */ - } -1: mfspr r26, CYCLE_LOW /* get start point for this backoff */ -2: mfspr r22, CYCLE_LOW /* test to see if we've backed off enough */ - sub r22, r22, r26 - slt r22, r22, r25 - bbst r22, 2b - { - shli r25, r25, 1 /* double the backoff; retry the tns */ - tns r21, ATOMIC_LOCK_REG_NAME - } - slt r26, r23, r25 /* is the proposed backoff too big? */ - { - mvnz r25, r26, r23 - bzt r21, .Ldo_cmpxchg\bitwidth - } - j 1b -#endif /* CONFIG_SMP */ - .endm - -.Lcmpxchg32_tns: - /* - * This is the last instruction on the second cache line. - * The nop here loads the second line, then we fall through - * to the tns to load the third line before we take the lock. - */ - nop - cmpxchg_lock 32 - - /* - * This code is invoked from sys_cmpxchg after most of the - * preconditions have been checked. We still need to check - * that r0 is 8-byte aligned, since if it's not we won't - * actually be atomic. However, ATOMIC_LOCK_REG has the atomic - * lock pointer and r27/r28 have the saved SP/PC. - * r23 is holding "r0 & 7" so we can test for alignment. - * The compare value is in r2/r3; the new value is in r4/r5. - * On return, we must put the old value in r0/r1. - */ - .align 64 -.Lcmpxchg64: - { - bzt r23, .Lcmpxchg64_tns - } - j .Lcmpxchg_badaddr - -.Ldo_cmpxchg64: - { - lw r21, r0 - addi r25, r0, 4 - } - { - lw r1, r25 - } - seq r26, r21, r2 - { - bz r26, .Lcmpxchg64_mismatch - seq r26, r1, r3 - } - { - bz r26, .Lcmpxchg64_mismatch - } - sw r0, r4 - sw r25, r5 - - /* - * The 32-bit path provides optimized "match" and "mismatch" - * iret paths, but we don't have enough bundles in this cache line - * to do that, so we just make even the "mismatch" path do an "mf". - */ -.Lcmpxchg64_mismatch: - { - move sp, r27 - mtspr SPR_EX_CONTEXT_K_0, r28 - } - mf - { - move r0, r21 - sw ATOMIC_LOCK_REG_NAME, zero - } - iret - -.Lcmpxchg64_tns: - cmpxchg_lock 64 - - - /* - * Reset sp and revector to sys_cmpxchg_badaddr(), which will - * just raise the appropriate signal and exit. Doing it this - * way means we don't have to duplicate the code in intvec.S's - * int_hand macro that locates the top of the stack. - */ -.Lcmpxchg_badaddr: - { - moveli TREG_SYSCALL_NR_NAME, __NR_cmpxchg_badaddr - move sp, r27 - } - j intvec_SWINT_1 - ENDPROC(sys_cmpxchg) - ENTRY(__sys_cmpxchg_end) - - -/* The single-step support may need to read all the registers. */ -int_unalign: - push_extra_callee_saves r0 - j do_trap - -/* Include .intrpt array of interrupt vectors */ - .section ".intrpt", "ax" - -#ifndef CONFIG_USE_PMC -#define handle_perf_interrupt bad_intr -#endif - -#ifndef CONFIG_HARDWALL -#define do_hardwall_trap bad_intr -#endif - - int_hand INT_ITLB_MISS, ITLB_MISS, \ - do_page_fault, handle_interrupt_no_single_step - int_hand INT_MEM_ERROR, MEM_ERROR, bad_intr - int_hand INT_ILL, ILL, do_trap, handle_ill - int_hand INT_GPV, GPV, do_trap - int_hand INT_SN_ACCESS, SN_ACCESS, do_trap - int_hand INT_IDN_ACCESS, IDN_ACCESS, do_trap - int_hand INT_UDN_ACCESS, UDN_ACCESS, do_trap - int_hand INT_IDN_REFILL, IDN_REFILL, bad_intr - int_hand INT_UDN_REFILL, UDN_REFILL, bad_intr - int_hand INT_IDN_COMPLETE, IDN_COMPLETE, bad_intr - int_hand INT_UDN_COMPLETE, UDN_COMPLETE, bad_intr - int_hand INT_SWINT_3, SWINT_3, do_trap - int_hand INT_SWINT_2, SWINT_2, do_trap - int_hand INT_SWINT_1, SWINT_1, SYSCALL, handle_syscall - int_hand INT_SWINT_0, SWINT_0, do_trap - int_hand INT_UNALIGN_DATA, UNALIGN_DATA, int_unalign - int_hand INT_DTLB_MISS, DTLB_MISS, do_page_fault - int_hand INT_DTLB_ACCESS, DTLB_ACCESS, do_page_fault - int_hand INT_DMATLB_MISS, DMATLB_MISS, do_page_fault - int_hand INT_DMATLB_ACCESS, DMATLB_ACCESS, do_page_fault - int_hand INT_SNITLB_MISS, SNITLB_MISS, do_page_fault - int_hand INT_SN_NOTIFY, SN_NOTIFY, bad_intr - int_hand INT_SN_FIREWALL, SN_FIREWALL, do_hardwall_trap - int_hand INT_IDN_FIREWALL, IDN_FIREWALL, bad_intr - int_hand INT_UDN_FIREWALL, UDN_FIREWALL, do_hardwall_trap - int_hand INT_TILE_TIMER, TILE_TIMER, do_timer_interrupt - int_hand INT_IDN_TIMER, IDN_TIMER, bad_intr - int_hand INT_UDN_TIMER, UDN_TIMER, bad_intr - int_hand INT_DMA_NOTIFY, DMA_NOTIFY, bad_intr - int_hand INT_IDN_CA, IDN_CA, bad_intr - int_hand INT_UDN_CA, UDN_CA, bad_intr - int_hand INT_IDN_AVAIL, IDN_AVAIL, bad_intr - int_hand INT_UDN_AVAIL, UDN_AVAIL, bad_intr - int_hand INT_PERF_COUNT, PERF_COUNT, \ - handle_perf_interrupt, handle_nmi - int_hand INT_INTCTRL_3, INTCTRL_3, bad_intr -#if CONFIG_KERNEL_PL == 2 - dc_dispatch INT_INTCTRL_2, INTCTRL_2 - int_hand INT_INTCTRL_1, INTCTRL_1, bad_intr -#else - int_hand INT_INTCTRL_2, INTCTRL_2, bad_intr - dc_dispatch INT_INTCTRL_1, INTCTRL_1 -#endif - int_hand INT_INTCTRL_0, INTCTRL_0, bad_intr - int_hand INT_MESSAGE_RCV_DWNCL, MESSAGE_RCV_DWNCL, \ - hv_message_intr - int_hand INT_DEV_INTR_DWNCL, DEV_INTR_DWNCL, \ - tile_dev_intr - int_hand INT_I_ASID, I_ASID, bad_intr - int_hand INT_D_ASID, D_ASID, bad_intr - int_hand INT_DMATLB_MISS_DWNCL, DMATLB_MISS_DWNCL, \ - do_page_fault - int_hand INT_SNITLB_MISS_DWNCL, SNITLB_MISS_DWNCL, \ - do_page_fault - int_hand INT_DMATLB_ACCESS_DWNCL, DMATLB_ACCESS_DWNCL, \ - do_page_fault - int_hand INT_SN_CPL, SN_CPL, bad_intr - int_hand INT_DOUBLE_FAULT, DOUBLE_FAULT, do_trap - int_hand INT_AUX_PERF_COUNT, AUX_PERF_COUNT, \ - handle_perf_interrupt, handle_nmi - - /* Synthetic interrupt delivered only by the simulator */ - int_hand INT_BREAKPOINT, BREAKPOINT, do_breakpoint diff --git a/arch/tile/kernel/intvec_64.S b/arch/tile/kernel/intvec_64.S deleted file mode 100644 index 3b51bdf37d11..000000000000 --- a/arch/tile/kernel/intvec_64.S +++ /dev/null @@ -1,1564 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Linux interrupt vectors. - */ - -#include <linux/linkage.h> -#include <linux/errno.h> -#include <linux/unistd.h> -#include <linux/init.h> -#include <asm/ptrace.h> -#include <asm/thread_info.h> -#include <asm/irqflags.h> -#include <asm/asm-offsets.h> -#include <asm/types.h> -#include <asm/traps.h> -#include <asm/signal.h> -#include <hv/hypervisor.h> -#include <arch/abi.h> -#include <arch/interrupts.h> -#include <arch/spr_def.h> - -#define PTREGS_PTR(reg, ptreg) addli reg, sp, C_ABI_SAVE_AREA_SIZE + (ptreg) - -#define PTREGS_OFFSET_SYSCALL PTREGS_OFFSET_REG(TREG_SYSCALL_NR) - -#if CONFIG_KERNEL_PL == 1 || CONFIG_KERNEL_PL == 2 -/* - * Set "result" non-zero if ex1 holds the PL of the kernel - * (with or without ICS being set). Note this works only - * because we never find the PL at level 3. - */ -# define IS_KERNEL_EX1(result, ex1) andi result, ex1, CONFIG_KERNEL_PL -#else -# error Recode IS_KERNEL_EX1 for CONFIG_KERNEL_PL -#endif - - .macro push_reg reg, ptr=sp, delta=-8 - { - st \ptr, \reg - addli \ptr, \ptr, \delta - } - .endm - - .macro pop_reg reg, ptr=sp, delta=8 - { - ld \reg, \ptr - addli \ptr, \ptr, \delta - } - .endm - - .macro pop_reg_zero reg, zreg, ptr=sp, delta=8 - { - move \zreg, zero - ld \reg, \ptr - addi \ptr, \ptr, \delta - } - .endm - - .macro push_extra_callee_saves reg - PTREGS_PTR(\reg, PTREGS_OFFSET_REG(51)) - push_reg r51, \reg - push_reg r50, \reg - push_reg r49, \reg - push_reg r48, \reg - push_reg r47, \reg - push_reg r46, \reg - push_reg r45, \reg - push_reg r44, \reg - push_reg r43, \reg - push_reg r42, \reg - push_reg r41, \reg - push_reg r40, \reg - push_reg r39, \reg - push_reg r38, \reg - push_reg r37, \reg - push_reg r36, \reg - push_reg r35, \reg - push_reg r34, \reg, PTREGS_OFFSET_BASE - PTREGS_OFFSET_REG(34) - .endm - - .macro panic str - .pushsection .rodata, "a" -1: - .asciz "\str" - .popsection - { - moveli r0, hw2_last(1b) - } - { - shl16insli r0, r0, hw1(1b) - } - { - shl16insli r0, r0, hw0(1b) - jal panic - } - .endm - - /* - * Unalign data exception fast handling: In order to handle - * unaligned data access, a fast JIT version is generated and stored - * in a specific area in user space. We first need to do a quick poke - * to see if the JIT is available. We use certain bits in the fault - * PC (3 to 9 is used for 16KB page size) as index to address the JIT - * code area. The first 64bit word is the fault PC, and the 2nd one is - * the fault bundle itself. If these 2 words both match, then we - * directly "iret" to JIT code. If not, a slow path is invoked to - * generate new JIT code. Note: the current JIT code WILL be - * overwritten if it existed. So, ideally we can handle 128 unalign - * fixups via JIT. For lookup efficiency and to effectively support - * tight loops with multiple unaligned reference, a simple - * direct-mapped cache is used. - * - * SPR_EX_CONTEXT_K_0 is modified to return to JIT code. - * SPR_EX_CONTEXT_K_1 has ICS set. - * SPR_EX_CONTEXT_0_0 is setup to user program's next PC. - * SPR_EX_CONTEXT_0_1 = 0. - */ - .macro int_hand_unalign_fast vecnum, vecname - .org (\vecnum << 8) -intvec_\vecname: - /* Put r3 in SPR_SYSTEM_SAVE_K_1. */ - mtspr SPR_SYSTEM_SAVE_K_1, r3 - - mfspr r3, SPR_EX_CONTEXT_K_1 - /* - * Examine if exception comes from user without ICS set. - * If not, just go directly to the slow path. - */ - bnez r3, hand_unalign_slow_nonuser - - mfspr r3, SPR_SYSTEM_SAVE_K_0 - - /* Get &thread_info->unalign_jit_tmp[0] in r3. */ - bfexts r3, r3, 0, CPU_SHIFT-1 - mm r3, zero, LOG2_THREAD_SIZE, 63 - addli r3, r3, THREAD_INFO_UNALIGN_JIT_TMP_OFFSET - - /* - * Save r0, r1, r2 into thread_info array r3 points to - * from low to high memory in order. - */ - st_add r3, r0, 8 - st_add r3, r1, 8 - { - st_add r3, r2, 8 - andi r2, sp, 7 - } - - /* Save stored r3 value so we can revert it on a page fault. */ - mfspr r1, SPR_SYSTEM_SAVE_K_1 - st r3, r1 - - { - /* Generate a SIGBUS if sp is not 8-byte aligned. */ - bnez r2, hand_unalign_slow_badsp - } - - /* - * Get the thread_info in r0; load r1 with pc. Set the low bit of sp - * as an indicator to the page fault code in case we fault. - */ - { - ori sp, sp, 1 - mfspr r1, SPR_EX_CONTEXT_K_0 - } - - /* Add the jit_info offset in thread_info; extract r1 [3:9] into r2. */ - { - addli r0, r3, THREAD_INFO_UNALIGN_JIT_BASE_OFFSET - \ - (THREAD_INFO_UNALIGN_JIT_TMP_OFFSET + (3 * 8)) - bfextu r2, r1, 3, (2 + PAGE_SHIFT - UNALIGN_JIT_SHIFT) - } - - /* Load the jit_info; multiply r2 by 128. */ - { - ld r0, r0 - shli r2, r2, UNALIGN_JIT_SHIFT - } - - /* - * If r0 is NULL, the JIT page is not mapped, so go to slow path; - * add offset r2 to r0 at the same time. - */ - { - beqz r0, hand_unalign_slow - add r2, r0, r2 - } - - /* - * We are loading from userspace (both the JIT info PC and - * instruction word, and the instruction word we executed) - * and since either could fault while holding the interrupt - * critical section, we must tag this region and check it in - * do_page_fault() to handle it properly. - */ -ENTRY(__start_unalign_asm_code) - - /* Load first word of JIT in r0 and increment r2 by 8. */ - ld_add r0, r2, 8 - - /* - * Compare the PC with the 1st word in JIT; load the fault bundle - * into r1. - */ - { - cmpeq r0, r0, r1 - ld r1, r1 - } - - /* Go to slow path if PC doesn't match. */ - beqz r0, hand_unalign_slow - - /* - * Load the 2nd word of JIT, which is supposed to be the fault - * bundle for a cache hit. Increment r2; after this bundle r2 will - * point to the potential start of the JIT code we want to run. - */ - ld_add r0, r2, 8 - - /* No further accesses to userspace are done after this point. */ -ENTRY(__end_unalign_asm_code) - - /* Compare the real bundle with what is saved in the JIT area. */ - { - cmpeq r0, r1, r0 - mtspr SPR_EX_CONTEXT_0_1, zero - } - - /* Go to slow path if the fault bundle does not match. */ - beqz r0, hand_unalign_slow - - /* - * A cache hit is found. - * r2 points to start of JIT code (3rd word). - * r0 is the fault pc. - * r1 is the fault bundle. - * Reset the low bit of sp. - */ - { - mfspr r0, SPR_EX_CONTEXT_K_0 - andi sp, sp, ~1 - } - - /* Write r2 into EX_CONTEXT_K_0 and increment PC. */ - { - mtspr SPR_EX_CONTEXT_K_0, r2 - addi r0, r0, 8 - } - - /* - * Set ICS on kernel EX_CONTEXT_K_1 in order to "iret" to - * user with ICS set. This way, if the JIT fixup causes another - * unalign exception (which shouldn't be possible) the user - * process will be terminated with SIGBUS. Also, our fixup will - * run without interleaving with external interrupts. - * Each fixup is at most 14 bundles, so it won't hold ICS for long. - */ - { - movei r1, PL_ICS_EX1(USER_PL, 1) - mtspr SPR_EX_CONTEXT_0_0, r0 - } - - { - mtspr SPR_EX_CONTEXT_K_1, r1 - addi r3, r3, -(3 * 8) - } - - /* Restore r0..r3. */ - ld_add r0, r3, 8 - ld_add r1, r3, 8 - ld_add r2, r3, 8 - ld r3, r3 - - iret - ENDPROC(intvec_\vecname) - .endm - -#ifdef __COLLECT_LINKER_FEEDBACK__ - .pushsection .text.intvec_feedback,"ax" -intvec_feedback: - .popsection -#endif - - /* - * Default interrupt handler. - * - * vecnum is where we'll put this code. - * c_routine is the C routine we'll call. - * - * The C routine is passed two arguments: - * - A pointer to the pt_regs state. - * - The interrupt vector number. - * - * The "processing" argument specifies the code for processing - * the interrupt. Defaults to "handle_interrupt". - */ - .macro __int_hand vecnum, vecname, c_routine,processing=handle_interrupt -intvec_\vecname: - /* Temporarily save a register so we have somewhere to work. */ - - mtspr SPR_SYSTEM_SAVE_K_1, r0 - mfspr r0, SPR_EX_CONTEXT_K_1 - - /* - * The unalign data fastpath code sets the low bit in sp to - * force us to reset it here on fault. - */ - { - blbs sp, 2f - IS_KERNEL_EX1(r0, r0) - } - - .ifc \vecnum, INT_DOUBLE_FAULT - /* - * For double-faults from user-space, fall through to the normal - * register save and stack setup path. Otherwise, it's the - * hypervisor giving us one last chance to dump diagnostics, and we - * branch to the kernel_double_fault routine to do so. - */ - beqz r0, 1f - j _kernel_double_fault -1: - .else - /* - * If we're coming from user-space, then set sp to the top of - * the kernel stack. Otherwise, assume sp is already valid. - */ - { - bnez r0, 0f - move r0, sp - } - .endif - - .ifc \c_routine, do_page_fault - /* - * The page_fault handler may be downcalled directly by the - * hypervisor even when Linux is running and has ICS set. - * - * In this case the contents of EX_CONTEXT_K_1 reflect the - * previous fault and can't be relied on to choose whether or - * not to reinitialize the stack pointer. So we add a test - * to see whether SYSTEM_SAVE_K_2 has the high bit set, - * and if so we don't reinitialize sp, since we must be coming - * from Linux. (In fact the precise case is !(val & ~1), - * but any Linux PC has to have the high bit set.) - * - * Note that the hypervisor *always* sets SYSTEM_SAVE_K_2 for - * any path that turns into a downcall to one of our TLB handlers. - * - * FIXME: if we end up never using this path, perhaps we should - * prevent the hypervisor from generating downcalls in this case. - * The advantage of getting a downcall is we can panic in Linux. - */ - mfspr r0, SPR_SYSTEM_SAVE_K_2 - { - bltz r0, 0f /* high bit in S_S_1_2 is for a PC to use */ - move r0, sp - } - .endif - -2: - /* - * SYSTEM_SAVE_K_0 holds the cpu number in the high bits, and - * the current stack top in the lower bits. So we recover - * our starting stack value by sign-extending the low bits, then - * point sp at the top aligned address on the actual stack page. - */ - mfspr r0, SPR_SYSTEM_SAVE_K_0 - bfexts r0, r0, 0, CPU_SHIFT-1 - -0: - /* - * Align the stack mod 64 so we can properly predict what - * cache lines we need to write-hint to reduce memory fetch - * latency as we enter the kernel. The layout of memory is - * as follows, with cache line 0 at the lowest VA, and cache - * line 8 just below the r0 value this "andi" computes. - * Note that we never write to cache line 8, and we skip - * cache lines 1-3 for syscalls. - * - * cache line 8: ptregs padding (two words) - * cache line 7: sp, lr, pc, ex1, faultnum, orig_r0, flags, cmpexch - * cache line 6: r46...r53 (tp) - * cache line 5: r38...r45 - * cache line 4: r30...r37 - * cache line 3: r22...r29 - * cache line 2: r14...r21 - * cache line 1: r6...r13 - * cache line 0: 2 x frame, r0..r5 - */ -#if STACK_TOP_DELTA != 64 -#error STACK_TOP_DELTA must be 64 for assumptions here and in task_pt_regs() -#endif - andi r0, r0, -64 - - /* - * Push the first four registers on the stack, so that we can set - * them to vector-unique values before we jump to the common code. - * - * Registers are pushed on the stack as a struct pt_regs, - * with the sp initially just above the struct, and when we're - * done, sp points to the base of the struct, minus - * C_ABI_SAVE_AREA_SIZE, so we can directly jal to C code. - * - * This routine saves just the first four registers, plus the - * stack context so we can do proper backtracing right away, - * and defers to handle_interrupt to save the rest. - * The backtracer needs pc, ex1, lr, sp, r52, and faultnum, - * and needs sp set to its final location at the bottom of - * the stack frame. - */ - addli r0, r0, PTREGS_OFFSET_LR - (PTREGS_SIZE + KSTK_PTREGS_GAP) - wh64 r0 /* cache line 7 */ - { - st r0, lr - addli r0, r0, PTREGS_OFFSET_SP - PTREGS_OFFSET_LR - } - { - st r0, sp - addli sp, r0, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_SP - } - wh64 sp /* cache line 6 */ - { - st sp, r52 - addli sp, sp, PTREGS_OFFSET_REG(1) - PTREGS_OFFSET_REG(52) - } - wh64 sp /* cache line 0 */ - { - st sp, r1 - addli sp, sp, PTREGS_OFFSET_REG(2) - PTREGS_OFFSET_REG(1) - } - { - st sp, r2 - addli sp, sp, PTREGS_OFFSET_REG(3) - PTREGS_OFFSET_REG(2) - } - { - st sp, r3 - addli sp, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_REG(3) - } - mfspr r0, SPR_EX_CONTEXT_K_0 - .ifc \processing,handle_syscall - /* - * Bump the saved PC by one bundle so that when we return, we won't - * execute the same swint instruction again. We need to do this while - * we're in the critical section. - */ - addi r0, r0, 8 - .endif - { - st sp, r0 - addli sp, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC - } - mfspr r0, SPR_EX_CONTEXT_K_1 - { - st sp, r0 - addi sp, sp, PTREGS_OFFSET_FAULTNUM - PTREGS_OFFSET_EX1 - /* - * Use r0 for syscalls so it's a temporary; use r1 for interrupts - * so that it gets passed through unchanged to the handler routine. - * Note that the .if conditional confusingly spans bundles. - */ - .ifc \processing,handle_syscall - movei r0, \vecnum - } - { - st sp, r0 - .else - movei r1, \vecnum - } - { - st sp, r1 - .endif - addli sp, sp, PTREGS_OFFSET_REG(0) - PTREGS_OFFSET_FAULTNUM - } - mfspr r0, SPR_SYSTEM_SAVE_K_1 /* Original r0 */ - { - st sp, r0 - addi sp, sp, -PTREGS_OFFSET_REG(0) - 8 - } - { - st sp, zero /* write zero into "Next SP" frame pointer */ - addi sp, sp, -8 /* leave SP pointing at bottom of frame */ - } - .ifc \processing,handle_syscall - j handle_syscall - .else - /* Capture per-interrupt SPR context to registers. */ - .ifc \c_routine, do_page_fault - mfspr r2, SPR_SYSTEM_SAVE_K_3 /* address of page fault */ - mfspr r3, SPR_SYSTEM_SAVE_K_2 /* info about page fault */ - .else - .ifc \vecnum, INT_ILL_TRANS - mfspr r2, ILL_VA_PC - .else - .ifc \vecnum, INT_DOUBLE_FAULT - mfspr r2, SPR_SYSTEM_SAVE_K_2 /* double fault info from HV */ - .else - .ifc \c_routine, do_trap - mfspr r2, GPV_REASON - .else - .ifc \c_routine, handle_perf_interrupt - mfspr r2, PERF_COUNT_STS - .else - .ifc \c_routine, handle_perf_interrupt - mfspr r2, AUX_PERF_COUNT_STS - .endif - .ifc \c_routine, do_nmi - mfspr r2, SPR_SYSTEM_SAVE_K_2 /* nmi type */ - .else - .endif - .endif - .endif - .endif - .endif - .endif - /* Put function pointer in r0 */ - moveli r0, hw2_last(\c_routine) - shl16insli r0, r0, hw1(\c_routine) - { - shl16insli r0, r0, hw0(\c_routine) - j \processing - } - .endif - ENDPROC(intvec_\vecname) - -#ifdef __COLLECT_LINKER_FEEDBACK__ - .pushsection .text.intvec_feedback,"ax" - .org (\vecnum << 5) - FEEDBACK_ENTER_EXPLICIT(intvec_\vecname, .intrpt, 1 << 8) - jrp lr - .popsection -#endif - - .endm - - - /* - * Save the rest of the registers that we didn't save in the actual - * vector itself. We can't use r0-r10 inclusive here. - */ - .macro finish_interrupt_save, function - - /* If it's a syscall, save a proper orig_r0, otherwise just zero. */ - PTREGS_PTR(r52, PTREGS_OFFSET_ORIG_R0) - { - .ifc \function,handle_syscall - st r52, r0 - .else - st r52, zero - .endif - PTREGS_PTR(r52, PTREGS_OFFSET_TP) - } - st r52, tp - { - mfspr tp, CMPEXCH_VALUE - PTREGS_PTR(r52, PTREGS_OFFSET_CMPEXCH) - } - - /* - * For ordinary syscalls, we save neither caller- nor callee- - * save registers, since the syscall invoker doesn't expect the - * caller-saves to be saved, and the called kernel functions will - * take care of saving the callee-saves for us. - * - * For interrupts we save just the caller-save registers. Saving - * them is required (since the "caller" can't save them). Again, - * the called kernel functions will restore the callee-save - * registers for us appropriately. - * - * On return, we normally restore nothing special for syscalls, - * and just the caller-save registers for interrupts. - * - * However, there are some important caveats to all this: - * - * - We always save a few callee-save registers to give us - * some scratchpad registers to carry across function calls. - * - * - fork/vfork/etc require us to save all the callee-save - * registers, which we do in PTREGS_SYSCALL_ALL_REGS, below. - * - * - We always save r0..r5 and r10 for syscalls, since we need - * to reload them a bit later for the actual kernel call, and - * since we might need them for -ERESTARTNOINTR, etc. - * - * - Before invoking a signal handler, we save the unsaved - * callee-save registers so they are visible to the - * signal handler or any ptracer. - * - * - If the unsaved callee-save registers are modified, we set - * a bit in pt_regs so we know to reload them from pt_regs - * and not just rely on the kernel function unwinding. - * (Done for ptrace register writes and SA_SIGINFO handler.) - */ - { - st r52, tp - PTREGS_PTR(r52, PTREGS_OFFSET_REG(33)) - } - wh64 r52 /* cache line 4 */ - push_reg r33, r52 - push_reg r32, r52 - push_reg r31, r52 - .ifc \function,handle_syscall - push_reg r30, r52, PTREGS_OFFSET_SYSCALL - PTREGS_OFFSET_REG(30) - push_reg TREG_SYSCALL_NR_NAME, r52, \ - PTREGS_OFFSET_REG(5) - PTREGS_OFFSET_SYSCALL - .else - - push_reg r30, r52, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(30) - wh64 r52 /* cache line 3 */ - push_reg r29, r52 - push_reg r28, r52 - push_reg r27, r52 - push_reg r26, r52 - push_reg r25, r52 - push_reg r24, r52 - push_reg r23, r52 - push_reg r22, r52 - wh64 r52 /* cache line 2 */ - push_reg r21, r52 - push_reg r20, r52 - push_reg r19, r52 - push_reg r18, r52 - push_reg r17, r52 - push_reg r16, r52 - push_reg r15, r52 - push_reg r14, r52 - wh64 r52 /* cache line 1 */ - push_reg r13, r52 - push_reg r12, r52 - push_reg r11, r52 - push_reg r10, r52 - push_reg r9, r52 - push_reg r8, r52 - push_reg r7, r52 - push_reg r6, r52 - - .endif - - push_reg r5, r52 - st r52, r4 - - /* - * If we will be returning to the kernel, we will need to - * reset the interrupt masks to the state they had before. - * Set DISABLE_IRQ in flags iff we came from kernel pl with - * irqs disabled. - */ - mfspr r32, SPR_EX_CONTEXT_K_1 - { - IS_KERNEL_EX1(r32, r32) - PTREGS_PTR(r21, PTREGS_OFFSET_FLAGS) - } - beqzt r32, 1f /* zero if from user space */ - IRQS_DISABLED(r32) /* zero if irqs enabled */ -#if PT_FLAGS_DISABLE_IRQ != 1 -# error Value of IRQS_DISABLED used to set PT_FLAGS_DISABLE_IRQ; fix -#endif -1: - .ifnc \function,handle_syscall - /* Record the fact that we saved the caller-save registers above. */ - ori r32, r32, PT_FLAGS_CALLER_SAVES - .endif - st r21, r32 - - /* - * we've captured enough state to the stack (including in - * particular our EX_CONTEXT state) that we can now release - * the interrupt critical section and replace it with our - * standard "interrupts disabled" mask value. This allows - * synchronous interrupts (and profile interrupts) to punch - * through from this point onwards. - * - * It's important that no code before this point touch memory - * other than our own stack (to keep the invariant that this - * is all that gets touched under ICS), and that no code after - * this point reference any interrupt-specific SPR, in particular - * the EX_CONTEXT_K_ values. - */ - .ifc \function,handle_nmi - IRQ_DISABLE_ALL(r20) - .else - IRQ_DISABLE(r20, r21) - .endif - mtspr INTERRUPT_CRITICAL_SECTION, zero - - /* Load tp with our per-cpu offset. */ -#ifdef CONFIG_SMP - { - mfspr r20, SPR_SYSTEM_SAVE_K_0 - moveli r21, hw2_last(__per_cpu_offset) - } - { - shl16insli r21, r21, hw1(__per_cpu_offset) - bfextu r20, r20, CPU_SHIFT, 63 - } - shl16insli r21, r21, hw0(__per_cpu_offset) - shl3add r20, r20, r21 - ld tp, r20 -#else - move tp, zero -#endif - -#ifdef __COLLECT_LINKER_FEEDBACK__ - /* - * Notify the feedback routines that we were in the - * appropriate fixed interrupt vector area. Note that we - * still have ICS set at this point, so we can't invoke any - * atomic operations or we will panic. The feedback - * routines internally preserve r0..r10 and r30 up. - */ - .ifnc \function,handle_syscall - shli r20, r1, 5 - .else - moveli r20, INT_SWINT_1 << 5 - .endif - moveli r21, hw2_last(intvec_feedback) - shl16insli r21, r21, hw1(intvec_feedback) - shl16insli r21, r21, hw0(intvec_feedback) - add r20, r20, r21 - jalr r20 - - /* And now notify the feedback routines that we are here. */ - FEEDBACK_ENTER(\function) -#endif - - /* - * Prepare the first 256 stack bytes to be rapidly accessible - * without having to fetch the background data. - */ - addi r52, sp, -64 - { - wh64 r52 - addi r52, r52, -64 - } - { - wh64 r52 - addi r52, r52, -64 - } - { - wh64 r52 - addi r52, r52, -64 - } - wh64 r52 - -#if defined(CONFIG_TRACE_IRQFLAGS) || defined(CONFIG_CONTEXT_TRACKING) - .ifnc \function,handle_nmi - /* - * We finally have enough state set up to notify the irq - * tracing code that irqs were disabled on entry to the handler. - * The TRACE_IRQS_OFF call clobbers registers r0-r29. - * For syscalls, we already have the register state saved away - * on the stack, so we don't bother to do any register saves here, - * and later we pop the registers back off the kernel stack. - * For interrupt handlers, save r0-r3 in callee-saved registers. - */ - .ifnc \function,handle_syscall - { move r30, r0; move r31, r1 } - { move r32, r2; move r33, r3 } - .endif - TRACE_IRQS_OFF -#ifdef CONFIG_CONTEXT_TRACKING - jal context_tracking_user_exit -#endif - .ifnc \function,handle_syscall - { move r0, r30; move r1, r31 } - { move r2, r32; move r3, r33 } - .endif - .endif -#endif - - .endm - - /* - * Redispatch a downcall. - */ - .macro dc_dispatch vecnum, vecname - .org (\vecnum << 8) -intvec_\vecname: - j _hv_downcall_dispatch - ENDPROC(intvec_\vecname) - .endm - - /* - * Common code for most interrupts. The C function we're eventually - * going to is in r0, and the faultnum is in r1; the original - * values for those registers are on the stack. - */ - .pushsection .text.handle_interrupt,"ax" -handle_interrupt: - finish_interrupt_save handle_interrupt - - /* Jump to the C routine; it should enable irqs as soon as possible. */ - { - jalr r0 - PTREGS_PTR(r0, PTREGS_OFFSET_BASE) - } - FEEDBACK_REENTER(handle_interrupt) - { - movei r30, 0 /* not an NMI */ - j interrupt_return - } - STD_ENDPROC(handle_interrupt) - -/* - * This routine takes a boolean in r30 indicating if this is an NMI. - * If so, we also expect a boolean in r31 indicating whether to - * re-enable the oprofile interrupts. - * - * Note that .Lresume_userspace is jumped to directly in several - * places, and we need to make sure r30 is set correctly in those - * callers as well. - */ -STD_ENTRY(interrupt_return) - /* If we're resuming to kernel space, don't check thread flags. */ - { - bnez r30, .Lrestore_all /* NMIs don't special-case user-space */ - PTREGS_PTR(r29, PTREGS_OFFSET_EX1) - } - ld r29, r29 - IS_KERNEL_EX1(r29, r29) - { - beqzt r29, .Lresume_userspace - move r29, sp - } - -#ifdef CONFIG_PREEMPT - /* Returning to kernel space. Check if we need preemption. */ - EXTRACT_THREAD_INFO(r29) - addli r28, r29, THREAD_INFO_FLAGS_OFFSET - { - ld r28, r28 - addli r29, r29, THREAD_INFO_PREEMPT_COUNT_OFFSET - } - { - andi r28, r28, _TIF_NEED_RESCHED - ld4s r29, r29 - } - beqzt r28, 1f - bnez r29, 1f - /* Disable interrupts explicitly for preemption. */ - IRQ_DISABLE(r20,r21) - TRACE_IRQS_OFF - jal preempt_schedule_irq - FEEDBACK_REENTER(interrupt_return) -1: -#endif - - /* If we're resuming to _cpu_idle_nap, bump PC forward by 8. */ - { - moveli r27, hw2_last(_cpu_idle_nap) - PTREGS_PTR(r29, PTREGS_OFFSET_PC) - } - { - ld r28, r29 - shl16insli r27, r27, hw1(_cpu_idle_nap) - } - { - shl16insli r27, r27, hw0(_cpu_idle_nap) - } - { - cmpeq r27, r27, r28 - } - { - blbc r27, .Lrestore_all - addi r28, r28, 8 - } - st r29, r28 - j .Lrestore_all - -.Lresume_userspace: - FEEDBACK_REENTER(interrupt_return) - - /* - * Disable interrupts so as to make sure we don't - * miss an interrupt that sets any of the thread flags (like - * need_resched or sigpending) between sampling and the iret. - * Routines like schedule() or do_signal() may re-enable - * interrupts before returning. - */ - IRQ_DISABLE(r20, r21) - TRACE_IRQS_OFF /* Note: clobbers registers r0-r29 */ - - /* - * See if there are any work items (including single-shot items) - * to do. If so, save the callee-save registers to pt_regs - * and then dispatch to C code. - */ - move r21, sp - EXTRACT_THREAD_INFO(r21) - { - addi r22, r21, THREAD_INFO_FLAGS_OFFSET - moveli r20, hw1_last(_TIF_ALLWORK_MASK) - } - { - ld r22, r22 - shl16insli r20, r20, hw0(_TIF_ALLWORK_MASK) - } - and r1, r22, r20 - { - PTREGS_PTR(r0, PTREGS_OFFSET_BASE) - beqzt r1, .Lrestore_all - } - push_extra_callee_saves r0 - jal prepare_exit_to_usermode - - /* - * In the NMI case we - * omit the call to single_process_check_nohz, which normally checks - * to see if we should start or stop the scheduler tick, because - * we can't call arbitrary Linux code from an NMI context. - * We always call the homecache TLB deferral code to re-trigger - * the deferral mechanism. - * - * The other chunk of responsibility this code has is to reset the - * interrupt masks appropriately to reset irqs and NMIs. We have - * to call TRACE_IRQS_OFF and TRACE_IRQS_ON to support all the - * lockdep-type stuff, but we can't set ICS until afterwards, since - * ICS can only be used in very tight chunks of code to avoid - * tripping over various assertions that it is off. - */ -.Lrestore_all: - PTREGS_PTR(r0, PTREGS_OFFSET_EX1) - { - ld r0, r0 - PTREGS_PTR(r32, PTREGS_OFFSET_FLAGS) - } - { - IS_KERNEL_EX1(r0, r0) - ld r32, r32 - } - bnez r0, 1f - j 2f -#if PT_FLAGS_DISABLE_IRQ != 1 -# error Assuming PT_FLAGS_DISABLE_IRQ == 1 so we can use blbct below -#endif -1: blbct r32, 2f - IRQ_DISABLE(r20,r21) - TRACE_IRQS_OFF - movei r0, 1 - mtspr INTERRUPT_CRITICAL_SECTION, r0 - beqzt r30, .Lrestore_regs - j 3f -2: TRACE_IRQS_ON - IRQ_ENABLE_LOAD(r20, r21) - movei r0, 1 - mtspr INTERRUPT_CRITICAL_SECTION, r0 - IRQ_ENABLE_APPLY(r20, r21) - beqzt r30, .Lrestore_regs -3: - -#if INT_PERF_COUNT + 1 != INT_AUX_PERF_COUNT -# error Bad interrupt assumption -#endif - { - movei r0, 3 /* two adjacent bits for the PERF_COUNT mask */ - beqz r31, .Lrestore_regs - } - shli r0, r0, INT_PERF_COUNT - mtspr SPR_INTERRUPT_MASK_RESET_K, r0 - - /* - * We now commit to returning from this interrupt, since we will be - * doing things like setting EX_CONTEXT SPRs and unwinding the stack - * frame. No calls should be made to any other code after this point. - * This code should only be entered with ICS set. - * r32 must still be set to ptregs.flags. - * We launch loads to each cache line separately first, so we can - * get some parallelism out of the memory subsystem. - * We start zeroing caller-saved registers throughout, since - * that will save some cycles if this turns out to be a syscall. - */ -.Lrestore_regs: - - /* - * Rotate so we have one high bit and one low bit to test. - * - low bit says whether to restore all the callee-saved registers, - * or just r30-r33, and r52 up. - * - high bit (i.e. sign bit) says whether to restore all the - * caller-saved registers, or just r0. - */ -#if PT_FLAGS_CALLER_SAVES != 2 || PT_FLAGS_RESTORE_REGS != 4 -# error Rotate trick does not work :-) -#endif - { - rotli r20, r32, 62 - PTREGS_PTR(sp, PTREGS_OFFSET_REG(0)) - } - - /* - * Load cache lines 0, 4, 6 and 7, in that order, then use - * the last loaded value, which makes it likely that the other - * cache lines have also loaded, at which point we should be - * able to safely read all the remaining words on those cache - * lines without waiting for the memory subsystem. - */ - pop_reg r0, sp, PTREGS_OFFSET_REG(30) - PTREGS_OFFSET_REG(0) - pop_reg r30, sp, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_REG(30) - pop_reg_zero r52, r3, sp, PTREGS_OFFSET_CMPEXCH - PTREGS_OFFSET_REG(52) - pop_reg_zero r21, r27, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_CMPEXCH - pop_reg_zero lr, r2, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_EX1 - { - mtspr CMPEXCH_VALUE, r21 - move r4, zero - } - pop_reg r21, sp, PTREGS_OFFSET_REG(31) - PTREGS_OFFSET_PC - { - mtspr SPR_EX_CONTEXT_K_1, lr - IS_KERNEL_EX1(lr, lr) - } - { - mtspr SPR_EX_CONTEXT_K_0, r21 - move r5, zero - } - - /* Restore callee-saveds that we actually use. */ - pop_reg_zero r31, r6 - pop_reg_zero r32, r7 - pop_reg_zero r33, r8, sp, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(33) - - /* - * If we modified other callee-saveds, restore them now. - * This is rare, but could be via ptrace or signal handler. - */ - { - move r9, zero - blbs r20, .Lrestore_callees - } -.Lcontinue_restore_regs: - - /* Check if we're returning from a syscall. */ - { - move r10, zero - bltzt r20, 1f /* no, so go restore callee-save registers */ - } - - /* - * Check if we're returning to userspace. - * Note that if we're not, we don't worry about zeroing everything. - */ - { - addli sp, sp, PTREGS_OFFSET_LR - PTREGS_OFFSET_REG(29) - bnez lr, .Lkernel_return - } - - /* - * On return from syscall, we've restored r0 from pt_regs, but we - * clear the remainder of the caller-saved registers. We could - * restore the syscall arguments, but there's not much point, - * and it ensures user programs aren't trying to use the - * caller-saves if we clear them, as well as avoiding leaking - * kernel pointers into userspace. - */ - pop_reg_zero lr, r11, sp, PTREGS_OFFSET_TP - PTREGS_OFFSET_LR - pop_reg_zero tp, r12, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_TP - { - ld sp, sp - move r13, zero - move r14, zero - } - { move r15, zero; move r16, zero } - { move r17, zero; move r18, zero } - { move r19, zero; move r20, zero } - { move r21, zero; move r22, zero } - { move r23, zero; move r24, zero } - { move r25, zero; move r26, zero } - - /* Set r1 to errno if we are returning an error, otherwise zero. */ - { - moveli r29, 4096 - sub r1, zero, r0 - } - { - move r28, zero - cmpltu r29, r1, r29 - } - { - mnz r1, r29, r1 - move r29, zero - } - iret - - /* - * Not a syscall, so restore caller-saved registers. - * First kick off loads for cache lines 1-3, which we're touching - * for the first time here. - */ - .align 64 -1: pop_reg r29, sp, PTREGS_OFFSET_REG(21) - PTREGS_OFFSET_REG(29) - pop_reg r21, sp, PTREGS_OFFSET_REG(13) - PTREGS_OFFSET_REG(21) - pop_reg r13, sp, PTREGS_OFFSET_REG(1) - PTREGS_OFFSET_REG(13) - pop_reg r1 - pop_reg r2 - pop_reg r3 - pop_reg r4 - pop_reg r5 - pop_reg r6 - pop_reg r7 - pop_reg r8 - pop_reg r9 - pop_reg r10 - pop_reg r11 - pop_reg r12, sp, 16 - /* r13 already restored above */ - pop_reg r14 - pop_reg r15 - pop_reg r16 - pop_reg r17 - pop_reg r18 - pop_reg r19 - pop_reg r20, sp, 16 - /* r21 already restored above */ - pop_reg r22 - pop_reg r23 - pop_reg r24 - pop_reg r25 - pop_reg r26 - pop_reg r27 - pop_reg r28, sp, PTREGS_OFFSET_LR - PTREGS_OFFSET_REG(28) - /* r29 already restored above */ - bnez lr, .Lkernel_return - pop_reg lr, sp, PTREGS_OFFSET_TP - PTREGS_OFFSET_LR - pop_reg tp, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_TP - ld sp, sp - iret - - /* - * We can't restore tp when in kernel mode, since a thread might - * have migrated from another cpu and brought a stale tp value. - */ -.Lkernel_return: - pop_reg lr, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_LR - ld sp, sp - iret - - /* Restore callee-saved registers from r34 to r51. */ -.Lrestore_callees: - addli sp, sp, PTREGS_OFFSET_REG(34) - PTREGS_OFFSET_REG(29) - pop_reg r34 - pop_reg r35 - pop_reg r36 - pop_reg r37 - pop_reg r38 - pop_reg r39 - pop_reg r40 - pop_reg r41 - pop_reg r42 - pop_reg r43 - pop_reg r44 - pop_reg r45 - pop_reg r46 - pop_reg r47 - pop_reg r48 - pop_reg r49 - pop_reg r50 - pop_reg r51, sp, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(51) - j .Lcontinue_restore_regs - STD_ENDPROC(interrupt_return) - - /* - * "NMI" interrupts mask ALL interrupts before calling the - * handler, and don't check thread flags, etc., on the way - * back out. In general, the only things we do here for NMIs - * are register save/restore and dataplane kernel-TLB management. - * We don't (for example) deal with start/stop of the sched tick. - */ - .pushsection .text.handle_nmi,"ax" -handle_nmi: - finish_interrupt_save handle_nmi - { - jalr r0 - PTREGS_PTR(r0, PTREGS_OFFSET_BASE) - } - FEEDBACK_REENTER(handle_nmi) - { - movei r30, 1 - cmpeq r31, r0, zero - } - j interrupt_return - STD_ENDPROC(handle_nmi) - - /* - * Parallel code for syscalls to handle_interrupt. - */ - .pushsection .text.handle_syscall,"ax" -handle_syscall: - finish_interrupt_save handle_syscall - - /* Enable irqs. */ - TRACE_IRQS_ON - IRQ_ENABLE(r20, r21) - - /* Bump the counter for syscalls made on this tile. */ - moveli r20, hw2_last(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET) - shl16insli r20, r20, hw1(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET) - shl16insli r20, r20, hw0(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET) - add r20, r20, tp - ld4s r21, r20 - { - addi r21, r21, 1 - move r31, sp - } - { - st4 r20, r21 - EXTRACT_THREAD_INFO(r31) - } - - /* Trace syscalls, if requested. */ - addi r31, r31, THREAD_INFO_FLAGS_OFFSET - { - ld r30, r31 - moveli r32, _TIF_SYSCALL_ENTRY_WORK - } - and r30, r30, r32 - { - addi r30, r31, THREAD_INFO_STATUS_OFFSET - THREAD_INFO_FLAGS_OFFSET - beqzt r30, .Lrestore_syscall_regs - } - { - PTREGS_PTR(r0, PTREGS_OFFSET_BASE) - jal do_syscall_trace_enter - } - FEEDBACK_REENTER(handle_syscall) - bltz r0, .Lsyscall_sigreturn_skip - - /* - * We always reload our registers from the stack at this - * point. They might be valid, if we didn't build with - * TRACE_IRQFLAGS, and this isn't a dataplane tile, and we're not - * doing syscall tracing, but there are enough cases now that it - * seems simplest just to do the reload unconditionally. - */ -.Lrestore_syscall_regs: - { - ld r30, r30 - PTREGS_PTR(r11, PTREGS_OFFSET_REG(0)) - } - pop_reg r0, r11 - pop_reg r1, r11 - pop_reg r2, r11 - pop_reg r3, r11 - pop_reg r4, r11 - pop_reg r5, r11, PTREGS_OFFSET_SYSCALL - PTREGS_OFFSET_REG(5) - { - ld TREG_SYSCALL_NR_NAME, r11 - moveli r21, __NR_syscalls - } - - /* Ensure that the syscall number is within the legal range. */ - { - moveli r20, hw2(sys_call_table) -#ifdef CONFIG_COMPAT - blbs r30, .Lcompat_syscall -#endif - } - { - cmpltu r21, TREG_SYSCALL_NR_NAME, r21 - shl16insli r20, r20, hw1(sys_call_table) - } - { - blbc r21, .Linvalid_syscall - shl16insli r20, r20, hw0(sys_call_table) - } -.Lload_syscall_pointer: - shl3add r20, TREG_SYSCALL_NR_NAME, r20 - ld r20, r20 - - /* Jump to syscall handler. */ - jalr r20 -.Lhandle_syscall_link: /* value of "lr" after "jalr r20" above */ - - /* - * Write our r0 onto the stack so it gets restored instead - * of whatever the user had there before. - * In compat mode, sign-extend r0 before storing it. - */ - { - PTREGS_PTR(r29, PTREGS_OFFSET_REG(0)) - blbct r30, 1f - } - addxi r0, r0, 0 -1: st r29, r0 - -.Lsyscall_sigreturn_skip: - FEEDBACK_REENTER(handle_syscall) - - /* Do syscall trace again, if requested. */ - { - ld r30, r31 - moveli r32, _TIF_SYSCALL_EXIT_WORK - } - and r0, r30, r32 - { - andi r0, r30, _TIF_SINGLESTEP - beqzt r0, 1f - } - { - PTREGS_PTR(r0, PTREGS_OFFSET_BASE) - jal do_syscall_trace_exit - } - FEEDBACK_REENTER(handle_syscall) - andi r0, r30, _TIF_SINGLESTEP - -1: beqzt r0, 2f - - /* Single stepping -- notify ptrace. */ - { - movei r0, SIGTRAP - jal ptrace_notify - } - FEEDBACK_REENTER(handle_syscall) - -2: { - movei r30, 0 /* not an NMI */ - j .Lresume_userspace /* jump into middle of interrupt_return */ - } - -#ifdef CONFIG_COMPAT -.Lcompat_syscall: - /* - * Load the base of the compat syscall table in r20, and - * range-check the syscall number (duplicated from 64-bit path). - * Sign-extend all the user's passed arguments to make them consistent. - * Also save the original "r(n)" values away in "r(11+n)" in - * case the syscall table entry wants to validate them. - */ - moveli r20, hw2(compat_sys_call_table) - { - cmpltu r21, TREG_SYSCALL_NR_NAME, r21 - shl16insli r20, r20, hw1(compat_sys_call_table) - } - { - blbc r21, .Linvalid_syscall - shl16insli r20, r20, hw0(compat_sys_call_table) - } - { move r11, r0; addxi r0, r0, 0 } - { move r12, r1; addxi r1, r1, 0 } - { move r13, r2; addxi r2, r2, 0 } - { move r14, r3; addxi r3, r3, 0 } - { move r15, r4; addxi r4, r4, 0 } - { move r16, r5; addxi r5, r5, 0 } - j .Lload_syscall_pointer -#endif - -.Linvalid_syscall: - /* Report an invalid syscall back to the user program */ - { - PTREGS_PTR(r29, PTREGS_OFFSET_REG(0)) - movei r28, -ENOSYS - } - st r29, r28 - { - movei r30, 0 /* not an NMI */ - j .Lresume_userspace /* jump into middle of interrupt_return */ - } - STD_ENDPROC(handle_syscall) - - /* Return the address for oprofile to suppress in backtraces. */ -STD_ENTRY_SECTION(handle_syscall_link_address, .text.handle_syscall) - lnk r0 - { - addli r0, r0, .Lhandle_syscall_link - . - jrp lr - } - STD_ENDPROC(handle_syscall_link_address) - -STD_ENTRY(ret_from_fork) - jal sim_notify_fork - jal schedule_tail - FEEDBACK_REENTER(ret_from_fork) - { - movei r30, 0 /* not an NMI */ - j .Lresume_userspace /* jump into middle of interrupt_return */ - } - STD_ENDPROC(ret_from_fork) - -STD_ENTRY(ret_from_kernel_thread) - jal sim_notify_fork - jal schedule_tail - FEEDBACK_REENTER(ret_from_fork) - { - move r0, r31 - jalr r30 - } - FEEDBACK_REENTER(ret_from_kernel_thread) - { - movei r30, 0 /* not an NMI */ - j interrupt_return - } - STD_ENDPROC(ret_from_kernel_thread) - -/* Various stub interrupt handlers and syscall handlers */ - -STD_ENTRY_LOCAL(_kernel_double_fault) - mfspr r1, SPR_EX_CONTEXT_K_0 - move r2, lr - move r3, sp - move r4, r52 - addi sp, sp, -C_ABI_SAVE_AREA_SIZE - j kernel_double_fault - STD_ENDPROC(_kernel_double_fault) - -STD_ENTRY_LOCAL(bad_intr) - mfspr r2, SPR_EX_CONTEXT_K_0 - panic "Unhandled interrupt %#x: PC %#lx" - STD_ENDPROC(bad_intr) - -/* - * Special-case sigreturn to not write r0 to the stack on return. - * This is technically more efficient, but it also avoids difficulties - * in the 64-bit OS when handling 32-bit compat code, since we must not - * sign-extend r0 for the sigreturn return-value case. - */ -#define PTREGS_SYSCALL_SIGRETURN(x, reg) \ - STD_ENTRY(_##x); \ - addli lr, lr, .Lsyscall_sigreturn_skip - .Lhandle_syscall_link; \ - { \ - PTREGS_PTR(reg, PTREGS_OFFSET_BASE); \ - j x \ - }; \ - STD_ENDPROC(_##x) - -PTREGS_SYSCALL_SIGRETURN(sys_rt_sigreturn, r0) -#ifdef CONFIG_COMPAT -PTREGS_SYSCALL_SIGRETURN(compat_sys_rt_sigreturn, r0) -#endif - -/* Save additional callee-saves to pt_regs and jump to standard function. */ -STD_ENTRY(_sys_clone) - push_extra_callee_saves r4 - j sys_clone - STD_ENDPROC(_sys_clone) - - /* - * Recover r3, r2, r1 and r0 here saved by unalign fast vector. - * The vector area limit is 32 bundles, so we handle the reload here. - * r0, r1, r2 are in thread_info from low to high memory in order. - * r3 points to location the original r3 was saved. - * We put this code in the __HEAD section so it can be reached - * via a conditional branch from the fast path. - */ - __HEAD -hand_unalign_slow: - andi sp, sp, ~1 -hand_unalign_slow_badsp: - addi r3, r3, -(3 * 8) - ld_add r0, r3, 8 - ld_add r1, r3, 8 - ld r2, r3 -hand_unalign_slow_nonuser: - mfspr r3, SPR_SYSTEM_SAVE_K_1 - __int_hand INT_UNALIGN_DATA, UNALIGN_DATA_SLOW, int_unalign - -/* The unaligned data support needs to read all the registers. */ -int_unalign: - push_extra_callee_saves r0 - j do_unaligned -ENDPROC(hand_unalign_slow) - -/* Fill the return address stack with nonzero entries. */ -STD_ENTRY(fill_ra_stack) - { - move r0, lr - jal 1f - } -1: jal 2f -2: jal 3f -3: jal 4f -4: jrp r0 - STD_ENDPROC(fill_ra_stack) - - .macro int_hand vecnum, vecname, c_routine, processing=handle_interrupt - .org (\vecnum << 8) - __int_hand \vecnum, \vecname, \c_routine, \processing - .endm - -/* Include .intrpt array of interrupt vectors */ - .section ".intrpt", "ax" - .global intrpt_start -intrpt_start: - -#ifndef CONFIG_USE_PMC -#define handle_perf_interrupt bad_intr -#endif - -#ifndef CONFIG_HARDWALL -#define do_hardwall_trap bad_intr -#endif - - int_hand INT_MEM_ERROR, MEM_ERROR, do_trap - int_hand INT_SINGLE_STEP_3, SINGLE_STEP_3, bad_intr -#if CONFIG_KERNEL_PL == 2 - int_hand INT_SINGLE_STEP_2, SINGLE_STEP_2, gx_singlestep_handle - int_hand INT_SINGLE_STEP_1, SINGLE_STEP_1, bad_intr -#else - int_hand INT_SINGLE_STEP_2, SINGLE_STEP_2, bad_intr - int_hand INT_SINGLE_STEP_1, SINGLE_STEP_1, gx_singlestep_handle -#endif - int_hand INT_SINGLE_STEP_0, SINGLE_STEP_0, bad_intr - int_hand INT_IDN_COMPLETE, IDN_COMPLETE, bad_intr - int_hand INT_UDN_COMPLETE, UDN_COMPLETE, bad_intr - int_hand INT_ITLB_MISS, ITLB_MISS, do_page_fault - int_hand INT_ILL, ILL, do_trap - int_hand INT_GPV, GPV, do_trap - int_hand INT_IDN_ACCESS, IDN_ACCESS, do_trap - int_hand INT_UDN_ACCESS, UDN_ACCESS, do_trap - int_hand INT_SWINT_3, SWINT_3, do_trap - int_hand INT_SWINT_2, SWINT_2, do_trap - int_hand INT_SWINT_1, SWINT_1, SYSCALL, handle_syscall - int_hand INT_SWINT_0, SWINT_0, do_trap - int_hand INT_ILL_TRANS, ILL_TRANS, do_trap - int_hand_unalign_fast INT_UNALIGN_DATA, UNALIGN_DATA - int_hand INT_DTLB_MISS, DTLB_MISS, do_page_fault - int_hand INT_DTLB_ACCESS, DTLB_ACCESS, do_page_fault - int_hand INT_IDN_FIREWALL, IDN_FIREWALL, do_hardwall_trap - int_hand INT_UDN_FIREWALL, UDN_FIREWALL, do_hardwall_trap - int_hand INT_TILE_TIMER, TILE_TIMER, do_timer_interrupt - int_hand INT_IDN_TIMER, IDN_TIMER, bad_intr - int_hand INT_UDN_TIMER, UDN_TIMER, bad_intr - int_hand INT_IDN_AVAIL, IDN_AVAIL, bad_intr - int_hand INT_UDN_AVAIL, UDN_AVAIL, bad_intr - int_hand INT_IPI_3, IPI_3, bad_intr -#if CONFIG_KERNEL_PL == 2 - int_hand INT_IPI_2, IPI_2, tile_dev_intr - int_hand INT_IPI_1, IPI_1, bad_intr -#else - int_hand INT_IPI_2, IPI_2, bad_intr - int_hand INT_IPI_1, IPI_1, tile_dev_intr -#endif - int_hand INT_IPI_0, IPI_0, bad_intr - int_hand INT_PERF_COUNT, PERF_COUNT, \ - handle_perf_interrupt, handle_nmi - int_hand INT_AUX_PERF_COUNT, AUX_PERF_COUNT, \ - handle_perf_interrupt, handle_nmi - int_hand INT_INTCTRL_3, INTCTRL_3, bad_intr -#if CONFIG_KERNEL_PL == 2 - dc_dispatch INT_INTCTRL_2, INTCTRL_2 - int_hand INT_INTCTRL_1, INTCTRL_1, bad_intr -#else - int_hand INT_INTCTRL_2, INTCTRL_2, bad_intr - dc_dispatch INT_INTCTRL_1, INTCTRL_1 -#endif - int_hand INT_INTCTRL_0, INTCTRL_0, bad_intr - int_hand INT_MESSAGE_RCV_DWNCL, MESSAGE_RCV_DWNCL, \ - hv_message_intr - int_hand INT_DEV_INTR_DWNCL, DEV_INTR_DWNCL, bad_intr - int_hand INT_I_ASID, I_ASID, bad_intr - int_hand INT_D_ASID, D_ASID, bad_intr - int_hand INT_DOUBLE_FAULT, DOUBLE_FAULT, do_trap - - /* Synthetic interrupt delivered only by the simulator */ - int_hand INT_BREAKPOINT, BREAKPOINT, do_breakpoint - /* Synthetic interrupt delivered by hv */ - int_hand INT_NMI_DWNCL, NMI_DWNCL, do_nmi, handle_nmi diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c deleted file mode 100644 index 22044fc691ef..000000000000 --- a/arch/tile/kernel/irq.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/module.h> -#include <linux/seq_file.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/kernel_stat.h> -#include <linux/uaccess.h> -#include <hv/drv_pcie_rc_intf.h> -#include <arch/spr_def.h> -#include <asm/traps.h> -#include <linux/perf_event.h> - -/* Bit-flag stored in irq_desc->chip_data to indicate HW-cleared irqs. */ -#define IS_HW_CLEARED 1 - -/* - * The set of interrupts we enable for arch_local_irq_enable(). - * This is initialized to have just a single interrupt that the kernel - * doesn't actually use as a sentinel. During kernel init, - * interrupts are added as the kernel gets prepared to support them. - * NOTE: we could probably initialize them all statically up front. - */ -DEFINE_PER_CPU(unsigned long long, interrupts_enabled_mask) = - INITIAL_INTERRUPTS_ENABLED; -EXPORT_PER_CPU_SYMBOL(interrupts_enabled_mask); - -/* Define per-tile device interrupt statistics state. */ -DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_internodealigned_in_smp; -EXPORT_PER_CPU_SYMBOL(irq_stat); - -/* - * Define per-tile irq disable mask; the hardware/HV only has a single - * mask that we use to implement both masking and disabling. - */ -static DEFINE_PER_CPU(unsigned long, irq_disable_mask) - ____cacheline_internodealigned_in_smp; - -/* - * Per-tile IRQ nesting depth. Used to make sure we enable newly - * enabled IRQs before exiting the outermost interrupt. - */ -static DEFINE_PER_CPU(int, irq_depth); - -#if CHIP_HAS_IPI() -/* Use SPRs to manipulate device interrupts. */ -#define mask_irqs(irq_mask) __insn_mtspr(SPR_IPI_MASK_SET_K, irq_mask) -#define unmask_irqs(irq_mask) __insn_mtspr(SPR_IPI_MASK_RESET_K, irq_mask) -#define clear_irqs(irq_mask) __insn_mtspr(SPR_IPI_EVENT_RESET_K, irq_mask) -#else -/* Use HV to manipulate device interrupts. */ -#define mask_irqs(irq_mask) hv_disable_intr(irq_mask) -#define unmask_irqs(irq_mask) hv_enable_intr(irq_mask) -#define clear_irqs(irq_mask) hv_clear_intr(irq_mask) -#endif - -/* - * The interrupt handling path, implemented in terms of HV interrupt - * emulation on TILEPro, and IPI hardware on TILE-Gx. - * Entered with interrupts disabled. - */ -void tile_dev_intr(struct pt_regs *regs, int intnum) -{ - int depth = __this_cpu_inc_return(irq_depth); - unsigned long original_irqs; - unsigned long remaining_irqs; - struct pt_regs *old_regs; - -#if CHIP_HAS_IPI() - /* - * Pending interrupts are listed in an SPR. We might be - * nested, so be sure to only handle irqs that weren't already - * masked by a previous interrupt. Then, mask out the ones - * we're going to handle. - */ - unsigned long masked = __insn_mfspr(SPR_IPI_MASK_K); - original_irqs = __insn_mfspr(SPR_IPI_EVENT_K) & ~masked; - __insn_mtspr(SPR_IPI_MASK_SET_K, original_irqs); -#else - /* - * Hypervisor performs the equivalent of the Gx code above and - * then puts the pending interrupt mask into a system save reg - * for us to find. - */ - original_irqs = __insn_mfspr(SPR_SYSTEM_SAVE_K_3); -#endif - remaining_irqs = original_irqs; - - /* Track time spent here in an interrupt context. */ - old_regs = set_irq_regs(regs); - irq_enter(); - -#ifdef CONFIG_DEBUG_STACKOVERFLOW - /* Debugging check for stack overflow: less than 1/8th stack free? */ - { - long sp = stack_pointer - (long) current_thread_info(); - if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) { - pr_emerg("%s: stack overflow: %ld\n", - __func__, sp - sizeof(struct thread_info)); - dump_stack(); - } - } -#endif - while (remaining_irqs) { - unsigned long irq = __ffs(remaining_irqs); - remaining_irqs &= ~(1UL << irq); - - /* Count device irqs; Linux IPIs are counted elsewhere. */ - if (irq != IRQ_RESCHEDULE) - __this_cpu_inc(irq_stat.irq_dev_intr_count); - - generic_handle_irq(irq); - } - - /* - * If we weren't nested, turn on all enabled interrupts, - * including any that were reenabled during interrupt - * handling. - */ - if (depth == 1) - unmask_irqs(~__this_cpu_read(irq_disable_mask)); - - __this_cpu_dec(irq_depth); - - /* - * Track time spent against the current process again and - * process any softirqs if they are waiting. - */ - irq_exit(); - set_irq_regs(old_regs); -} - - -/* - * Remove an irq from the disabled mask. If we're in an interrupt - * context, defer enabling the HW interrupt until we leave. - */ -static void tile_irq_chip_enable(struct irq_data *d) -{ - get_cpu_var(irq_disable_mask) &= ~(1UL << d->irq); - if (__this_cpu_read(irq_depth) == 0) - unmask_irqs(1UL << d->irq); - put_cpu_var(irq_disable_mask); -} - -/* - * Add an irq to the disabled mask. We disable the HW interrupt - * immediately so that there's no possibility of it firing. If we're - * in an interrupt context, the return path is careful to avoid - * unmasking a newly disabled interrupt. - */ -static void tile_irq_chip_disable(struct irq_data *d) -{ - get_cpu_var(irq_disable_mask) |= (1UL << d->irq); - mask_irqs(1UL << d->irq); - put_cpu_var(irq_disable_mask); -} - -/* Mask an interrupt. */ -static void tile_irq_chip_mask(struct irq_data *d) -{ - mask_irqs(1UL << d->irq); -} - -/* Unmask an interrupt. */ -static void tile_irq_chip_unmask(struct irq_data *d) -{ - unmask_irqs(1UL << d->irq); -} - -/* - * Clear an interrupt before processing it so that any new assertions - * will trigger another irq. - */ -static void tile_irq_chip_ack(struct irq_data *d) -{ - if ((unsigned long)irq_data_get_irq_chip_data(d) != IS_HW_CLEARED) - clear_irqs(1UL << d->irq); -} - -/* - * For per-cpu interrupts, we need to avoid unmasking any interrupts - * that we disabled via disable_percpu_irq(). - */ -static void tile_irq_chip_eoi(struct irq_data *d) -{ - if (!(__this_cpu_read(irq_disable_mask) & (1UL << d->irq))) - unmask_irqs(1UL << d->irq); -} - -static struct irq_chip tile_irq_chip = { - .name = "tile_irq_chip", - .irq_enable = tile_irq_chip_enable, - .irq_disable = tile_irq_chip_disable, - .irq_ack = tile_irq_chip_ack, - .irq_eoi = tile_irq_chip_eoi, - .irq_mask = tile_irq_chip_mask, - .irq_unmask = tile_irq_chip_unmask, -}; - -void __init init_IRQ(void) -{ - ipi_init(); -} - -void setup_irq_regs(void) -{ - /* Enable interrupt delivery. */ - unmask_irqs(~0UL); -#if CHIP_HAS_IPI() - arch_local_irq_unmask(INT_IPI_K); -#endif -} - -void tile_irq_activate(unsigned int irq, int tile_irq_type) -{ - /* - * We use handle_level_irq() by default because the pending - * interrupt vector (whether modeled by the HV on - * TILEPro or implemented in hardware on TILE-Gx) has - * level-style semantics for each bit. An interrupt fires - * whenever a bit is high, not just at edges. - */ - irq_flow_handler_t handle = handle_level_irq; - if (tile_irq_type == TILE_IRQ_PERCPU) - handle = handle_percpu_irq; - irq_set_chip_and_handler(irq, &tile_irq_chip, handle); - - /* - * Flag interrupts that are hardware-cleared so that ack() - * won't clear them. - */ - if (tile_irq_type == TILE_IRQ_HW_CLEAR) - irq_set_chip_data(irq, (void *)IS_HW_CLEARED); -} -EXPORT_SYMBOL(tile_irq_activate); - - -void ack_bad_irq(unsigned int irq) -{ - pr_err("unexpected IRQ trap at vector %02x\n", irq); -} - -/* - * /proc/interrupts printing: - */ -int arch_show_interrupts(struct seq_file *p, int prec) -{ -#ifdef CONFIG_PERF_EVENTS - int i; - - seq_printf(p, "%*s: ", prec, "PMI"); - - for_each_online_cpu(i) - seq_printf(p, "%10llu ", per_cpu(perf_irqs, i)); - seq_puts(p, " perf_events\n"); -#endif - return 0; -} - -#if CHIP_HAS_IPI() -int arch_setup_hwirq(unsigned int irq, int node) -{ - return irq >= NR_IRQS ? -EINVAL : 0; -} - -void arch_teardown_hwirq(unsigned int irq) { } -#endif diff --git a/arch/tile/kernel/jump_label.c b/arch/tile/kernel/jump_label.c deleted file mode 100644 index 93931a46625b..000000000000 --- a/arch/tile/kernel/jump_label.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright 2015 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * jump label TILE-Gx support - */ - -#include <linux/jump_label.h> -#include <linux/memory.h> -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/cpu.h> - -#include <asm/cacheflush.h> -#include <asm/insn.h> - -#ifdef HAVE_JUMP_LABEL - -static void __jump_label_transform(struct jump_entry *e, - enum jump_label_type type) -{ - tilegx_bundle_bits opcode; - /* Operate on writable kernel text mapping. */ - unsigned long pc_wr = ktext_writable_addr(e->code); - - if (type == JUMP_LABEL_JMP) - opcode = tilegx_gen_branch(e->code, e->target, false); - else - opcode = NOP(); - - *(tilegx_bundle_bits *)pc_wr = opcode; - /* Make sure that above mem writes were issued towards the memory. */ - smp_wmb(); -} - -void arch_jump_label_transform(struct jump_entry *e, - enum jump_label_type type) -{ - mutex_lock(&text_mutex); - - __jump_label_transform(e, type); - flush_icache_range(e->code, e->code + sizeof(tilegx_bundle_bits)); - - mutex_unlock(&text_mutex); -} - -__init_or_module void arch_jump_label_transform_static(struct jump_entry *e, - enum jump_label_type type) -{ - __jump_label_transform(e, type); -} - -#endif /* HAVE_JUMP_LABEL */ diff --git a/arch/tile/kernel/kgdb.c b/arch/tile/kernel/kgdb.c deleted file mode 100644 index d4eb5fb2df9d..000000000000 --- a/arch/tile/kernel/kgdb.c +++ /dev/null @@ -1,497 +0,0 @@ -/* - * Copyright 2013 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * TILE-Gx KGDB support. - */ - -#include <linux/ptrace.h> -#include <linux/kgdb.h> -#include <linux/kdebug.h> -#include <linux/uaccess.h> -#include <linux/module.h> -#include <linux/sched/task_stack.h> - -#include <asm/cacheflush.h> - -static tile_bundle_bits singlestep_insn = TILEGX_BPT_BUNDLE | DIE_SSTEPBP; -static unsigned long stepped_addr; -static tile_bundle_bits stepped_instr; - -struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = { - { "r0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[0])}, - { "r1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[1])}, - { "r2", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[2])}, - { "r3", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[3])}, - { "r4", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[4])}, - { "r5", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[5])}, - { "r6", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[6])}, - { "r7", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[7])}, - { "r8", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[8])}, - { "r9", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[9])}, - { "r10", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[10])}, - { "r11", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[11])}, - { "r12", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[12])}, - { "r13", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[13])}, - { "r14", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[14])}, - { "r15", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[15])}, - { "r16", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[16])}, - { "r17", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[17])}, - { "r18", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[18])}, - { "r19", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[19])}, - { "r20", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[20])}, - { "r21", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[21])}, - { "r22", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[22])}, - { "r23", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[23])}, - { "r24", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[24])}, - { "r25", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[25])}, - { "r26", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[26])}, - { "r27", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[27])}, - { "r28", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[28])}, - { "r29", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[29])}, - { "r30", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[30])}, - { "r31", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[31])}, - { "r32", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[32])}, - { "r33", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[33])}, - { "r34", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[34])}, - { "r35", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[35])}, - { "r36", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[36])}, - { "r37", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[37])}, - { "r38", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[38])}, - { "r39", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[39])}, - { "r40", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[40])}, - { "r41", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[41])}, - { "r42", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[42])}, - { "r43", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[43])}, - { "r44", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[44])}, - { "r45", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[45])}, - { "r46", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[46])}, - { "r47", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[47])}, - { "r48", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[48])}, - { "r49", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[49])}, - { "r50", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[50])}, - { "r51", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[51])}, - { "r52", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[52])}, - { "tp", GDB_SIZEOF_REG, offsetof(struct pt_regs, tp)}, - { "sp", GDB_SIZEOF_REG, offsetof(struct pt_regs, sp)}, - { "lr", GDB_SIZEOF_REG, offsetof(struct pt_regs, lr)}, - { "sn", GDB_SIZEOF_REG, -1}, - { "idn0", GDB_SIZEOF_REG, -1}, - { "idn1", GDB_SIZEOF_REG, -1}, - { "udn0", GDB_SIZEOF_REG, -1}, - { "udn1", GDB_SIZEOF_REG, -1}, - { "udn2", GDB_SIZEOF_REG, -1}, - { "udn3", GDB_SIZEOF_REG, -1}, - { "zero", GDB_SIZEOF_REG, -1}, - { "pc", GDB_SIZEOF_REG, offsetof(struct pt_regs, pc)}, - { "faultnum", GDB_SIZEOF_REG, offsetof(struct pt_regs, faultnum)}, -}; - -char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs) -{ - if (regno >= DBG_MAX_REG_NUM || regno < 0) - return NULL; - - if (dbg_reg_def[regno].offset != -1) - memcpy(mem, (void *)regs + dbg_reg_def[regno].offset, - dbg_reg_def[regno].size); - else - memset(mem, 0, dbg_reg_def[regno].size); - return dbg_reg_def[regno].name; -} - -int dbg_set_reg(int regno, void *mem, struct pt_regs *regs) -{ - if (regno >= DBG_MAX_REG_NUM || regno < 0) - return -EINVAL; - - if (dbg_reg_def[regno].offset != -1) - memcpy((void *)regs + dbg_reg_def[regno].offset, mem, - dbg_reg_def[regno].size); - return 0; -} - -/* - * Similar to pt_regs_to_gdb_regs() except that process is sleeping and so - * we may not be able to get all the info. - */ -void -sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task) -{ - struct pt_regs *thread_regs; - const int NGPRS = TREG_LAST_GPR + 1; - - if (task == NULL) - return; - - thread_regs = task_pt_regs(task); - memcpy(gdb_regs, thread_regs, NGPRS * sizeof(unsigned long)); - memset(&gdb_regs[NGPRS], 0, - (TILEGX_PC_REGNUM - NGPRS) * sizeof(unsigned long)); - gdb_regs[TILEGX_PC_REGNUM] = thread_regs->pc; - gdb_regs[TILEGX_FAULTNUM_REGNUM] = thread_regs->faultnum; -} - -void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc) -{ - regs->pc = pc; -} - -static void kgdb_call_nmi_hook(void *ignored) -{ - kgdb_nmicallback(raw_smp_processor_id(), NULL); -} - -void kgdb_roundup_cpus(unsigned long flags) -{ - local_irq_enable(); - smp_call_function(kgdb_call_nmi_hook, NULL, 0); - local_irq_disable(); -} - -/* - * Convert a kernel address to the writable kernel text mapping. - */ -static unsigned long writable_address(unsigned long addr) -{ - unsigned long ret = 0; - - if (core_kernel_text(addr)) - ret = ktext_writable_addr(addr); - else if (is_module_text_address(addr)) - ret = addr; - else - pr_err("Unknown virtual address 0x%lx\n", addr); - - return ret; -} - -/* - * Calculate the new address for after a step. - */ -static unsigned long get_step_address(struct pt_regs *regs) -{ - int src_reg; - int jump_off; - int br_off; - unsigned long addr; - unsigned int opcode; - tile_bundle_bits bundle; - - /* Move to the next instruction by default. */ - addr = regs->pc + TILEGX_BUNDLE_SIZE_IN_BYTES; - bundle = *(unsigned long *)instruction_pointer(regs); - - /* 0: X mode, Otherwise: Y mode. */ - if (bundle & TILEGX_BUNDLE_MODE_MASK) { - if (get_Opcode_Y1(bundle) == RRR_1_OPCODE_Y1 && - get_RRROpcodeExtension_Y1(bundle) == - UNARY_RRR_1_OPCODE_Y1) { - opcode = get_UnaryOpcodeExtension_Y1(bundle); - - switch (opcode) { - case JALR_UNARY_OPCODE_Y1: - case JALRP_UNARY_OPCODE_Y1: - case JR_UNARY_OPCODE_Y1: - case JRP_UNARY_OPCODE_Y1: - src_reg = get_SrcA_Y1(bundle); - dbg_get_reg(src_reg, &addr, regs); - break; - } - } - } else if (get_Opcode_X1(bundle) == RRR_0_OPCODE_X1) { - if (get_RRROpcodeExtension_X1(bundle) == - UNARY_RRR_0_OPCODE_X1) { - opcode = get_UnaryOpcodeExtension_X1(bundle); - - switch (opcode) { - case JALR_UNARY_OPCODE_X1: - case JALRP_UNARY_OPCODE_X1: - case JR_UNARY_OPCODE_X1: - case JRP_UNARY_OPCODE_X1: - src_reg = get_SrcA_X1(bundle); - dbg_get_reg(src_reg, &addr, regs); - break; - } - } - } else if (get_Opcode_X1(bundle) == JUMP_OPCODE_X1) { - opcode = get_JumpOpcodeExtension_X1(bundle); - - switch (opcode) { - case JAL_JUMP_OPCODE_X1: - case J_JUMP_OPCODE_X1: - jump_off = sign_extend(get_JumpOff_X1(bundle), 27); - addr = regs->pc + - (jump_off << TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES); - break; - } - } else if (get_Opcode_X1(bundle) == BRANCH_OPCODE_X1) { - br_off = 0; - opcode = get_BrType_X1(bundle); - - switch (opcode) { - case BEQZT_BRANCH_OPCODE_X1: - case BEQZ_BRANCH_OPCODE_X1: - if (get_SrcA_X1(bundle) == 0) - br_off = get_BrOff_X1(bundle); - break; - case BGEZT_BRANCH_OPCODE_X1: - case BGEZ_BRANCH_OPCODE_X1: - if (get_SrcA_X1(bundle) >= 0) - br_off = get_BrOff_X1(bundle); - break; - case BGTZT_BRANCH_OPCODE_X1: - case BGTZ_BRANCH_OPCODE_X1: - if (get_SrcA_X1(bundle) > 0) - br_off = get_BrOff_X1(bundle); - break; - case BLBCT_BRANCH_OPCODE_X1: - case BLBC_BRANCH_OPCODE_X1: - if (!(get_SrcA_X1(bundle) & 1)) - br_off = get_BrOff_X1(bundle); - break; - case BLBST_BRANCH_OPCODE_X1: - case BLBS_BRANCH_OPCODE_X1: - if (get_SrcA_X1(bundle) & 1) - br_off = get_BrOff_X1(bundle); - break; - case BLEZT_BRANCH_OPCODE_X1: - case BLEZ_BRANCH_OPCODE_X1: - if (get_SrcA_X1(bundle) <= 0) - br_off = get_BrOff_X1(bundle); - break; - case BLTZT_BRANCH_OPCODE_X1: - case BLTZ_BRANCH_OPCODE_X1: - if (get_SrcA_X1(bundle) < 0) - br_off = get_BrOff_X1(bundle); - break; - case BNEZT_BRANCH_OPCODE_X1: - case BNEZ_BRANCH_OPCODE_X1: - if (get_SrcA_X1(bundle) != 0) - br_off = get_BrOff_X1(bundle); - break; - } - - if (br_off != 0) { - br_off = sign_extend(br_off, 17); - addr = regs->pc + - (br_off << TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES); - } - } - - return addr; -} - -/* - * Replace the next instruction after the current instruction with a - * breakpoint instruction. - */ -static void do_single_step(struct pt_regs *regs) -{ - unsigned long addr_wr; - - /* Determine where the target instruction will send us to. */ - stepped_addr = get_step_address(regs); - probe_kernel_read((char *)&stepped_instr, (char *)stepped_addr, - BREAK_INSTR_SIZE); - - addr_wr = writable_address(stepped_addr); - probe_kernel_write((char *)addr_wr, (char *)&singlestep_insn, - BREAK_INSTR_SIZE); - smp_wmb(); - flush_icache_range(stepped_addr, stepped_addr + BREAK_INSTR_SIZE); -} - -static void undo_single_step(struct pt_regs *regs) -{ - unsigned long addr_wr; - - if (stepped_instr == 0) - return; - - addr_wr = writable_address(stepped_addr); - probe_kernel_write((char *)addr_wr, (char *)&stepped_instr, - BREAK_INSTR_SIZE); - stepped_instr = 0; - smp_wmb(); - flush_icache_range(stepped_addr, stepped_addr + BREAK_INSTR_SIZE); -} - -/* - * Calls linux_debug_hook before the kernel dies. If KGDB is enabled, - * then try to fall into the debugger. - */ -static int -kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr) -{ - int ret; - unsigned long flags; - struct die_args *args = (struct die_args *)ptr; - struct pt_regs *regs = args->regs; - -#ifdef CONFIG_KPROBES - /* - * Return immediately if the kprobes fault notifier has set - * DIE_PAGE_FAULT. - */ - if (cmd == DIE_PAGE_FAULT) - return NOTIFY_DONE; -#endif /* CONFIG_KPROBES */ - - switch (cmd) { - case DIE_BREAK: - case DIE_COMPILED_BPT: - break; - case DIE_SSTEPBP: - local_irq_save(flags); - kgdb_handle_exception(0, SIGTRAP, 0, regs); - local_irq_restore(flags); - return NOTIFY_STOP; - default: - /* Userspace events, ignore. */ - if (user_mode(regs)) - return NOTIFY_DONE; - } - - local_irq_save(flags); - ret = kgdb_handle_exception(args->trapnr, args->signr, args->err, regs); - local_irq_restore(flags); - if (ret) - return NOTIFY_DONE; - - return NOTIFY_STOP; -} - -static struct notifier_block kgdb_notifier = { - .notifier_call = kgdb_notify, -}; - -/* - * kgdb_arch_handle_exception - Handle architecture specific GDB packets. - * @vector: The error vector of the exception that happened. - * @signo: The signal number of the exception that happened. - * @err_code: The error code of the exception that happened. - * @remcom_in_buffer: The buffer of the packet we have read. - * @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into. - * @regs: The &struct pt_regs of the current process. - * - * This function MUST handle the 'c' and 's' command packets, - * as well packets to set / remove a hardware breakpoint, if used. - * If there are additional packets which the hardware needs to handle, - * they are handled here. The code should return -1 if it wants to - * process more packets, and a %0 or %1 if it wants to exit from the - * kgdb callback. - */ -int kgdb_arch_handle_exception(int vector, int signo, int err_code, - char *remcom_in_buffer, char *remcom_out_buffer, - struct pt_regs *regs) -{ - char *ptr; - unsigned long address; - - /* Undo any stepping we may have done. */ - undo_single_step(regs); - - switch (remcom_in_buffer[0]) { - case 'c': - case 's': - case 'D': - case 'k': - /* - * Try to read optional parameter, pc unchanged if no parm. - * If this was a compiled-in breakpoint, we need to move - * to the next instruction or we will just breakpoint - * over and over again. - */ - ptr = &remcom_in_buffer[1]; - if (kgdb_hex2long(&ptr, &address)) - regs->pc = address; - else if (*(unsigned long *)regs->pc == compiled_bpt) - regs->pc += BREAK_INSTR_SIZE; - - if (remcom_in_buffer[0] == 's') { - do_single_step(regs); - kgdb_single_step = 1; - atomic_set(&kgdb_cpu_doing_single_step, - raw_smp_processor_id()); - } else - atomic_set(&kgdb_cpu_doing_single_step, -1); - - return 0; - } - - return -1; /* this means that we do not want to exit from the handler */ -} - -struct kgdb_arch arch_kgdb_ops; - -/* - * kgdb_arch_init - Perform any architecture specific initialization. - * - * This function will handle the initialization of any architecture - * specific callbacks. - */ -int kgdb_arch_init(void) -{ - tile_bundle_bits bundle = TILEGX_BPT_BUNDLE; - - memcpy(arch_kgdb_ops.gdb_bpt_instr, &bundle, BREAK_INSTR_SIZE); - return register_die_notifier(&kgdb_notifier); -} - -/* - * kgdb_arch_exit - Perform any architecture specific uninitialization. - * - * This function will handle the uninitialization of any architecture - * specific callbacks, for dynamic registration and unregistration. - */ -void kgdb_arch_exit(void) -{ - unregister_die_notifier(&kgdb_notifier); -} - -int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt) -{ - int err; - unsigned long addr_wr = writable_address(bpt->bpt_addr); - - if (addr_wr == 0) - return -1; - - err = probe_kernel_read(bpt->saved_instr, (char *)bpt->bpt_addr, - BREAK_INSTR_SIZE); - if (err) - return err; - - err = probe_kernel_write((char *)addr_wr, arch_kgdb_ops.gdb_bpt_instr, - BREAK_INSTR_SIZE); - smp_wmb(); - flush_icache_range((unsigned long)bpt->bpt_addr, - (unsigned long)bpt->bpt_addr + BREAK_INSTR_SIZE); - return err; -} - -int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt) -{ - int err; - unsigned long addr_wr = writable_address(bpt->bpt_addr); - - if (addr_wr == 0) - return -1; - - err = probe_kernel_write((char *)addr_wr, (char *)bpt->saved_instr, - BREAK_INSTR_SIZE); - smp_wmb(); - flush_icache_range((unsigned long)bpt->bpt_addr, - (unsigned long)bpt->bpt_addr + BREAK_INSTR_SIZE); - return err; -} diff --git a/arch/tile/kernel/kprobes.c b/arch/tile/kernel/kprobes.c deleted file mode 100644 index c68694bb1ad2..000000000000 --- a/arch/tile/kernel/kprobes.c +++ /dev/null @@ -1,527 +0,0 @@ -/* - * arch/tile/kernel/kprobes.c - * Kprobes on TILE-Gx - * - * Some portions copied from the MIPS version. - * - * Copyright (C) IBM Corporation, 2002, 2004 - * Copyright 2006 Sony Corp. - * Copyright 2010 Cavium Networks - * - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/kprobes.h> -#include <linux/kdebug.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/uaccess.h> -#include <asm/cacheflush.h> - -#include <arch/opcode.h> - -DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; -DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); - -tile_bundle_bits breakpoint_insn = TILEGX_BPT_BUNDLE; -tile_bundle_bits breakpoint2_insn = TILEGX_BPT_BUNDLE | DIE_SSTEPBP; - -/* - * Check whether instruction is branch or jump, or if executing it - * has different results depending on where it is executed (e.g. lnk). - */ -static int __kprobes insn_has_control(kprobe_opcode_t insn) -{ - if (get_Mode(insn) != 0) { /* Y-format bundle */ - if (get_Opcode_Y1(insn) != RRR_1_OPCODE_Y1 || - get_RRROpcodeExtension_Y1(insn) != UNARY_RRR_1_OPCODE_Y1) - return 0; - - switch (get_UnaryOpcodeExtension_Y1(insn)) { - case JALRP_UNARY_OPCODE_Y1: - case JALR_UNARY_OPCODE_Y1: - case JRP_UNARY_OPCODE_Y1: - case JR_UNARY_OPCODE_Y1: - case LNK_UNARY_OPCODE_Y1: - return 1; - default: - return 0; - } - } - - switch (get_Opcode_X1(insn)) { - case BRANCH_OPCODE_X1: /* branch instructions */ - case JUMP_OPCODE_X1: /* jump instructions: j and jal */ - return 1; - - case RRR_0_OPCODE_X1: /* other jump instructions */ - if (get_RRROpcodeExtension_X1(insn) != UNARY_RRR_0_OPCODE_X1) - return 0; - switch (get_UnaryOpcodeExtension_X1(insn)) { - case JALRP_UNARY_OPCODE_X1: - case JALR_UNARY_OPCODE_X1: - case JRP_UNARY_OPCODE_X1: - case JR_UNARY_OPCODE_X1: - case LNK_UNARY_OPCODE_X1: - return 1; - default: - return 0; - } - default: - return 0; - } -} - -int __kprobes arch_prepare_kprobe(struct kprobe *p) -{ - unsigned long addr = (unsigned long)p->addr; - - if (addr & (sizeof(kprobe_opcode_t) - 1)) - return -EINVAL; - - if (insn_has_control(*p->addr)) { - pr_notice("Kprobes for control instructions are not supported\n"); - return -EINVAL; - } - - /* insn: must be on special executable page on tile. */ - p->ainsn.insn = get_insn_slot(); - if (!p->ainsn.insn) - return -ENOMEM; - - /* - * In the kprobe->ainsn.insn[] array we store the original - * instruction at index zero and a break trap instruction at - * index one. - */ - memcpy(&p->ainsn.insn[0], p->addr, sizeof(kprobe_opcode_t)); - p->ainsn.insn[1] = breakpoint2_insn; - p->opcode = *p->addr; - - return 0; -} - -void __kprobes arch_arm_kprobe(struct kprobe *p) -{ - unsigned long addr_wr; - - /* Operate on writable kernel text mapping. */ - addr_wr = ktext_writable_addr(p->addr); - - if (probe_kernel_write((void *)addr_wr, &breakpoint_insn, - sizeof(breakpoint_insn))) - pr_err("%s: failed to enable kprobe\n", __func__); - - smp_wmb(); - flush_insn_slot(p); -} - -void __kprobes arch_disarm_kprobe(struct kprobe *kp) -{ - unsigned long addr_wr; - - /* Operate on writable kernel text mapping. */ - addr_wr = ktext_writable_addr(kp->addr); - - if (probe_kernel_write((void *)addr_wr, &kp->opcode, - sizeof(kp->opcode))) - pr_err("%s: failed to enable kprobe\n", __func__); - - smp_wmb(); - flush_insn_slot(kp); -} - -void __kprobes arch_remove_kprobe(struct kprobe *p) -{ - if (p->ainsn.insn) { - free_insn_slot(p->ainsn.insn, 0); - p->ainsn.insn = NULL; - } -} - -static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) -{ - kcb->prev_kprobe.kp = kprobe_running(); - kcb->prev_kprobe.status = kcb->kprobe_status; - kcb->prev_kprobe.saved_pc = kcb->kprobe_saved_pc; -} - -static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb) -{ - __this_cpu_write(current_kprobe, kcb->prev_kprobe.kp); - kcb->kprobe_status = kcb->prev_kprobe.status; - kcb->kprobe_saved_pc = kcb->prev_kprobe.saved_pc; -} - -static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs, - struct kprobe_ctlblk *kcb) -{ - __this_cpu_write(current_kprobe, p); - kcb->kprobe_saved_pc = regs->pc; -} - -static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) -{ - /* Single step inline if the instruction is a break. */ - if (p->opcode == breakpoint_insn || - p->opcode == breakpoint2_insn) - regs->pc = (unsigned long)p->addr; - else - regs->pc = (unsigned long)&p->ainsn.insn[0]; -} - -static int __kprobes kprobe_handler(struct pt_regs *regs) -{ - struct kprobe *p; - int ret = 0; - kprobe_opcode_t *addr; - struct kprobe_ctlblk *kcb; - - addr = (kprobe_opcode_t *)regs->pc; - - /* - * We don't want to be preempted for the entire - * duration of kprobe processing. - */ - preempt_disable(); - kcb = get_kprobe_ctlblk(); - - /* Check we're not actually recursing. */ - if (kprobe_running()) { - p = get_kprobe(addr); - if (p) { - if (kcb->kprobe_status == KPROBE_HIT_SS && - p->ainsn.insn[0] == breakpoint_insn) { - goto no_kprobe; - } - /* - * We have reentered the kprobe_handler(), since - * another probe was hit while within the handler. - * We here save the original kprobes variables and - * just single step on the instruction of the new probe - * without calling any user handlers. - */ - save_previous_kprobe(kcb); - set_current_kprobe(p, regs, kcb); - kprobes_inc_nmissed_count(p); - prepare_singlestep(p, regs); - kcb->kprobe_status = KPROBE_REENTER; - return 1; - } else { - if (*addr != breakpoint_insn) { - /* - * The breakpoint instruction was removed by - * another cpu right after we hit, no further - * handling of this interrupt is appropriate. - */ - ret = 1; - goto no_kprobe; - } - p = __this_cpu_read(current_kprobe); - if (p->break_handler && p->break_handler(p, regs)) - goto ss_probe; - } - goto no_kprobe; - } - - p = get_kprobe(addr); - if (!p) { - if (*addr != breakpoint_insn) { - /* - * The breakpoint instruction was removed right - * after we hit it. Another cpu has removed - * either a probepoint or a debugger breakpoint - * at this address. In either case, no further - * handling of this interrupt is appropriate. - */ - ret = 1; - } - /* Not one of ours: let kernel handle it. */ - goto no_kprobe; - } - - set_current_kprobe(p, regs, kcb); - kcb->kprobe_status = KPROBE_HIT_ACTIVE; - - if (p->pre_handler && p->pre_handler(p, regs)) { - /* Handler has already set things up, so skip ss setup. */ - return 1; - } - -ss_probe: - prepare_singlestep(p, regs); - kcb->kprobe_status = KPROBE_HIT_SS; - return 1; - -no_kprobe: - preempt_enable_no_resched(); - return ret; -} - -/* - * Called after single-stepping. p->addr is the address of the - * instruction that has been replaced by the breakpoint. To avoid the - * SMP problems that can occur when we temporarily put back the - * original opcode to single-step, we single-stepped a copy of the - * instruction. The address of this copy is p->ainsn.insn. - * - * This function prepares to return from the post-single-step - * breakpoint trap. - */ -static void __kprobes resume_execution(struct kprobe *p, - struct pt_regs *regs, - struct kprobe_ctlblk *kcb) -{ - unsigned long orig_pc = kcb->kprobe_saved_pc; - regs->pc = orig_pc + 8; -} - -static inline int post_kprobe_handler(struct pt_regs *regs) -{ - struct kprobe *cur = kprobe_running(); - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - - if (!cur) - return 0; - - if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { - kcb->kprobe_status = KPROBE_HIT_SSDONE; - cur->post_handler(cur, regs, 0); - } - - resume_execution(cur, regs, kcb); - - /* Restore back the original saved kprobes variables and continue. */ - if (kcb->kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(kcb); - goto out; - } - reset_current_kprobe(); -out: - preempt_enable_no_resched(); - - return 1; -} - -static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) -{ - struct kprobe *cur = kprobe_running(); - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - - if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) - return 1; - - if (kcb->kprobe_status & KPROBE_HIT_SS) { - /* - * We are here because the instruction being single - * stepped caused a page fault. We reset the current - * kprobe and the ip points back to the probe address - * and allow the page fault handler to continue as a - * normal page fault. - */ - resume_execution(cur, regs, kcb); - reset_current_kprobe(); - preempt_enable_no_resched(); - } - return 0; -} - -/* - * Wrapper routine for handling exceptions. - */ -int __kprobes kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data) -{ - struct die_args *args = (struct die_args *)data; - int ret = NOTIFY_DONE; - - switch (val) { - case DIE_BREAK: - if (kprobe_handler(args->regs)) - ret = NOTIFY_STOP; - break; - case DIE_SSTEPBP: - if (post_kprobe_handler(args->regs)) - ret = NOTIFY_STOP; - break; - case DIE_PAGE_FAULT: - /* kprobe_running() needs smp_processor_id(). */ - preempt_disable(); - - if (kprobe_running() - && kprobe_fault_handler(args->regs, args->trapnr)) - ret = NOTIFY_STOP; - preempt_enable(); - break; - default: - break; - } - return ret; -} - -int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) -{ - struct jprobe *jp = container_of(p, struct jprobe, kp); - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - - kcb->jprobe_saved_regs = *regs; - kcb->jprobe_saved_sp = regs->sp; - - memcpy(kcb->jprobes_stack, (void *)kcb->jprobe_saved_sp, - MIN_JPROBES_STACK_SIZE(kcb->jprobe_saved_sp)); - - regs->pc = (unsigned long)(jp->entry); - - return 1; -} - -/* Defined in the inline asm below. */ -void jprobe_return_end(void); - -void __kprobes jprobe_return(void) -{ - asm volatile( - "bpt\n\t" - ".globl jprobe_return_end\n" - "jprobe_return_end:\n"); -} - -int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) -{ - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - - if (regs->pc >= (unsigned long)jprobe_return && - regs->pc <= (unsigned long)jprobe_return_end) { - *regs = kcb->jprobe_saved_regs; - memcpy((void *)kcb->jprobe_saved_sp, kcb->jprobes_stack, - MIN_JPROBES_STACK_SIZE(kcb->jprobe_saved_sp)); - preempt_enable_no_resched(); - - return 1; - } - return 0; -} - -/* - * Function return probe trampoline: - * - init_kprobes() establishes a probepoint here - * - When the probed function returns, this probe causes the - * handlers to fire - */ -static void __used kretprobe_trampoline_holder(void) -{ - asm volatile( - "nop\n\t" - ".global kretprobe_trampoline\n" - "kretprobe_trampoline:\n\t" - "nop\n\t" - : : : "memory"); -} - -void kretprobe_trampoline(void); - -void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, - struct pt_regs *regs) -{ - ri->ret_addr = (kprobe_opcode_t *) regs->lr; - - /* Replace the return addr with trampoline addr */ - regs->lr = (unsigned long)kretprobe_trampoline; -} - -/* - * Called when the probe at kretprobe trampoline is hit. - */ -static int __kprobes trampoline_probe_handler(struct kprobe *p, - struct pt_regs *regs) -{ - struct kretprobe_instance *ri = NULL; - struct hlist_head *head, empty_rp; - struct hlist_node *tmp; - unsigned long flags, orig_ret_address = 0; - unsigned long trampoline_address = (unsigned long)kretprobe_trampoline; - - INIT_HLIST_HEAD(&empty_rp); - kretprobe_hash_lock(current, &head, &flags); - - /* - * It is possible to have multiple instances associated with a given - * task either because multiple functions in the call path have - * a return probe installed on them, and/or more than one return - * return probe was registered for a target function. - * - * We can handle this because: - * - instances are always inserted at the head of the list - * - when multiple return probes are registered for the same - * function, the first instance's ret_addr will point to the - * real return address, and all the rest will point to - * kretprobe_trampoline - */ - hlist_for_each_entry_safe(ri, tmp, head, hlist) { - if (ri->task != current) - /* another task is sharing our hash bucket */ - continue; - - if (ri->rp && ri->rp->handler) - ri->rp->handler(ri, regs); - - orig_ret_address = (unsigned long)ri->ret_addr; - recycle_rp_inst(ri, &empty_rp); - - if (orig_ret_address != trampoline_address) { - /* - * This is the real return address. Any other - * instances associated with this task are for - * other calls deeper on the call stack - */ - break; - } - } - - kretprobe_assert(ri, orig_ret_address, trampoline_address); - instruction_pointer(regs) = orig_ret_address; - - reset_current_kprobe(); - kretprobe_hash_unlock(current, &flags); - preempt_enable_no_resched(); - - hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) { - hlist_del(&ri->hlist); - kfree(ri); - } - /* - * By returning a non-zero value, we are telling - * kprobe_handler() that we don't want the post_handler - * to run (and have re-enabled preemption) - */ - return 1; -} - -int __kprobes arch_trampoline_kprobe(struct kprobe *p) -{ - if (p->addr == (kprobe_opcode_t *)kretprobe_trampoline) - return 1; - - return 0; -} - -static struct kprobe trampoline_p = { - .addr = (kprobe_opcode_t *)kretprobe_trampoline, - .pre_handler = trampoline_probe_handler -}; - -int __init arch_init_kprobes(void) -{ - register_kprobe(&trampoline_p); - return 0; -} diff --git a/arch/tile/kernel/machine_kexec.c b/arch/tile/kernel/machine_kexec.c deleted file mode 100644 index 008aa2faef55..000000000000 --- a/arch/tile/kernel/machine_kexec.c +++ /dev/null @@ -1,298 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * based on machine_kexec.c from other architectures in linux-2.6.18 - */ - -#include <linux/mm.h> -#include <linux/kexec.h> -#include <linux/delay.h> -#include <linux/reboot.h> -#include <linux/errno.h> -#include <linux/vmalloc.h> -#include <linux/cpumask.h> -#include <linux/kernel.h> -#include <linux/elf.h> -#include <linux/highmem.h> -#include <linux/mmu_context.h> -#include <linux/io.h> -#include <linux/timex.h> -#include <asm/pgtable.h> -#include <asm/pgalloc.h> -#include <asm/cacheflush.h> -#include <asm/checksum.h> -#include <asm/tlbflush.h> -#include <asm/homecache.h> -#include <hv/hypervisor.h> - - -/* - * This stuff is not in elf.h and is not in any other kernel include. - * This stuff is needed below in the little boot notes parser to - * extract the command line so we can pass it to the hypervisor. - */ -struct Elf32_Bhdr { - Elf32_Word b_signature; - Elf32_Word b_size; - Elf32_Half b_checksum; - Elf32_Half b_records; -}; -#define ELF_BOOT_MAGIC 0x0E1FB007 -#define EBN_COMMAND_LINE 0x00000004 -#define roundupsz(X) (((X) + 3) & ~3) - -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - - -void machine_shutdown(void) -{ - /* - * Normally we would stop all the other processors here, but - * the check in machine_kexec_prepare below ensures we'll only - * get this far if we've been booted with "nosmp" on the - * command line or without CONFIG_SMP so there's nothing to do - * here (for now). - */ -} - -void machine_crash_shutdown(struct pt_regs *regs) -{ - /* - * Cannot happen. This type of kexec is disabled on this - * architecture (and enforced in machine_kexec_prepare below). - */ -} - - -int machine_kexec_prepare(struct kimage *image) -{ - if (num_online_cpus() > 1) { - pr_warn("%s: detected attempt to kexec with num_online_cpus() > 1\n", - __func__); - return -ENOSYS; - } - if (image->type != KEXEC_TYPE_DEFAULT) { - pr_warn("%s: detected attempt to kexec with unsupported type: %d\n", - __func__, image->type); - return -ENOSYS; - } - return 0; -} - -void machine_kexec_cleanup(struct kimage *image) -{ - /* - * We did nothing in machine_kexec_prepare, - * so we have nothing to do here. - */ -} - -/* - * If we can find elf boot notes on this page, return the command - * line. Otherwise, silently return null. Somewhat kludgy, but no - * good way to do this without significantly rearchitecting the - * architecture-independent kexec code. - */ - -static unsigned char *kexec_bn2cl(void *pg) -{ - struct Elf32_Bhdr *bhdrp; - Elf32_Nhdr *nhdrp; - unsigned char *desc; - unsigned char *command_line; - __sum16 csum; - - bhdrp = (struct Elf32_Bhdr *) pg; - - /* - * This routine is invoked for every source page, so make - * sure to quietly ignore every impossible page. - */ - if (bhdrp->b_signature != ELF_BOOT_MAGIC || - bhdrp->b_size > PAGE_SIZE) - return 0; - - /* - * If we get a checksum mismatch, warn with the checksum - * so we can diagnose better. - */ - csum = ip_compute_csum(pg, bhdrp->b_size); - if (csum != 0) { - pr_warn("%s: bad checksum %#x (size %d)\n", - __func__, csum, bhdrp->b_size); - return 0; - } - - nhdrp = (Elf32_Nhdr *) (bhdrp + 1); - - while (nhdrp->n_type != EBN_COMMAND_LINE) { - - desc = (unsigned char *) (nhdrp + 1); - desc += roundupsz(nhdrp->n_descsz); - - nhdrp = (Elf32_Nhdr *) desc; - - /* still in bounds? */ - if ((unsigned char *) (nhdrp + 1) > - ((unsigned char *) pg) + bhdrp->b_size) { - - pr_info("%s: out of bounds\n", __func__); - return 0; - } - } - - command_line = (unsigned char *) (nhdrp + 1); - desc = command_line; - - while (*desc != '\0') { - desc++; - if (((unsigned long)desc & PAGE_MASK) != (unsigned long)pg) { - pr_info("%s: ran off end of page\n", __func__); - return 0; - } - } - - return command_line; -} - -static void kexec_find_and_set_command_line(struct kimage *image) -{ - kimage_entry_t *ptr, entry; - - unsigned char *command_line = 0; - unsigned char *r; - HV_Errno hverr; - - for (ptr = &image->head; - (entry = *ptr) && !(entry & IND_DONE); - ptr = (entry & IND_INDIRECTION) ? - phys_to_virt((entry & PAGE_MASK)) : ptr + 1) { - - if ((entry & IND_SOURCE)) { - void *va = - kmap_atomic_pfn(entry >> PAGE_SHIFT); - r = kexec_bn2cl(va); - if (r) { - command_line = r; - break; - } - kunmap_atomic(va); - } - } - - if (command_line != 0) { - pr_info("setting new command line to \"%s\"\n", command_line); - - hverr = hv_set_command_line( - (HV_VirtAddr) command_line, strlen(command_line)); - kunmap_atomic(command_line); - } else { - pr_info("%s: no command line found; making empty\n", __func__); - hverr = hv_set_command_line((HV_VirtAddr) command_line, 0); - } - if (hverr) - pr_warn("%s: hv_set_command_line returned error: %d\n", - __func__, hverr); -} - -/* - * The kexec code range-checks all its PAs, so to avoid having it run - * amok and allocate memory and then sequester it from every other - * controller, we force it to come from controller zero. We also - * disable the oom-killer since if we do end up running out of memory, - * that almost certainly won't help. - */ -struct page *kimage_alloc_pages_arch(gfp_t gfp_mask, unsigned int order) -{ - gfp_mask |= __GFP_THISNODE | __GFP_NORETRY; - return alloc_pages_node(0, gfp_mask, order); -} - -/* - * Address range in which pa=va mapping is set in setup_quasi_va_is_pa(). - * For tilepro, PAGE_OFFSET is used since this is the largest possbile value - * for tilepro, while for tilegx, we limit it to entire middle level page - * table which we assume has been allocated and is undoubtedly large enough. - */ -#ifndef __tilegx__ -#define QUASI_VA_IS_PA_ADDR_RANGE PAGE_OFFSET -#else -#define QUASI_VA_IS_PA_ADDR_RANGE PGDIR_SIZE -#endif - -static void setup_quasi_va_is_pa(void) -{ - HV_PTE pte; - unsigned long i; - - /* - * Flush our TLB to prevent conflicts between the previous contents - * and the new stuff we're about to add. - */ - local_flush_tlb_all(); - - /* - * setup VA is PA, at least up to QUASI_VA_IS_PA_ADDR_RANGE. - * Note here we assume that level-1 page table is defined by - * HPAGE_SIZE. - */ - pte = hv_pte(_PAGE_KERNEL | _PAGE_HUGE_PAGE); - pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_NO_L3); - for (i = 0; i < (QUASI_VA_IS_PA_ADDR_RANGE >> HPAGE_SHIFT); i++) { - unsigned long vaddr = i << HPAGE_SHIFT; - pgd_t *pgd = pgd_offset(current->mm, vaddr); - pud_t *pud = pud_offset(pgd, vaddr); - pte_t *ptep = (pte_t *) pmd_offset(pud, vaddr); - unsigned long pfn = i << (HPAGE_SHIFT - PAGE_SHIFT); - - if (pfn_valid(pfn)) - __set_pte(ptep, pfn_pte(pfn, pte)); - } -} - - -void machine_kexec(struct kimage *image) -{ - void *reboot_code_buffer; - pte_t *ptep; - void (*rnk)(unsigned long, void *, unsigned long) - __noreturn; - - /* Mask all interrupts before starting to reboot. */ - interrupt_mask_set_mask(~0ULL); - - kexec_find_and_set_command_line(image); - - /* - * Adjust the home caching of the control page to be cached on - * this cpu, and copy the assembly helper into the control - * code page, which we map in the vmalloc area. - */ - homecache_change_page_home(image->control_code_page, 0, - smp_processor_id()); - reboot_code_buffer = page_address(image->control_code_page); - BUG_ON(reboot_code_buffer == NULL); - ptep = virt_to_pte(NULL, (unsigned long)reboot_code_buffer); - __set_pte(ptep, pte_mkexec(*ptep)); - memcpy(reboot_code_buffer, relocate_new_kernel, - relocate_new_kernel_size); - __flush_icache_range( - (unsigned long) reboot_code_buffer, - (unsigned long) reboot_code_buffer + relocate_new_kernel_size); - - setup_quasi_va_is_pa(); - - /* now call it */ - rnk = reboot_code_buffer; - (*rnk)(image->head, reboot_code_buffer, image->start); -} diff --git a/arch/tile/kernel/mcount_64.S b/arch/tile/kernel/mcount_64.S deleted file mode 100644 index 6c6702451962..000000000000 --- a/arch/tile/kernel/mcount_64.S +++ /dev/null @@ -1,211 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * TILE-Gx specific __mcount support - */ - -#include <linux/linkage.h> -#include <asm/ftrace.h> - -#define REGSIZE 8 - - .text - .global __mcount - - .macro MCOUNT_SAVE_REGS - addli sp, sp, -REGSIZE - { - st sp, lr - addli r29, sp, - (12 * REGSIZE) - } - { - addli sp, sp, - (13 * REGSIZE) - st r29, sp - } - addli r29, r29, REGSIZE - { st r29, r0; addli r29, r29, REGSIZE } - { st r29, r1; addli r29, r29, REGSIZE } - { st r29, r2; addli r29, r29, REGSIZE } - { st r29, r3; addli r29, r29, REGSIZE } - { st r29, r4; addli r29, r29, REGSIZE } - { st r29, r5; addli r29, r29, REGSIZE } - { st r29, r6; addli r29, r29, REGSIZE } - { st r29, r7; addli r29, r29, REGSIZE } - { st r29, r8; addli r29, r29, REGSIZE } - { st r29, r9; addli r29, r29, REGSIZE } - { st r29, r10; addli r29, r29, REGSIZE } - .endm - - .macro MCOUNT_RESTORE_REGS - addli r29, sp, (2 * REGSIZE) - { ld r0, r29; addli r29, r29, REGSIZE } - { ld r1, r29; addli r29, r29, REGSIZE } - { ld r2, r29; addli r29, r29, REGSIZE } - { ld r3, r29; addli r29, r29, REGSIZE } - { ld r4, r29; addli r29, r29, REGSIZE } - { ld r5, r29; addli r29, r29, REGSIZE } - { ld r6, r29; addli r29, r29, REGSIZE } - { ld r7, r29; addli r29, r29, REGSIZE } - { ld r8, r29; addli r29, r29, REGSIZE } - { ld r9, r29; addli r29, r29, REGSIZE } - { ld r10, r29; addli lr, sp, (13 * REGSIZE) } - { ld lr, lr; addli sp, sp, (14 * REGSIZE) } - .endm - - .macro RETURN_BACK - { move r12, lr; move lr, r10 } - jrp r12 - .endm - -#ifdef CONFIG_DYNAMIC_FTRACE - - .align 64 -STD_ENTRY(__mcount) -__mcount: - j ftrace_stub -STD_ENDPROC(__mcount) - - .align 64 -STD_ENTRY(ftrace_caller) - MCOUNT_SAVE_REGS - - /* arg1: self return address */ - /* arg2: parent's return address */ - /* arg3: ftrace_ops */ - /* arg4: regs (but make it NULL) */ - { move r0, lr; moveli r2, hw2_last(function_trace_op) } - { move r1, r10; shl16insli r2, r2, hw1(function_trace_op) } - { movei r3, 0; shl16insli r2, r2, hw0(function_trace_op) } - ld r2,r2 - - .global ftrace_call -ftrace_call: - /* - * a placeholder for the call to a real tracing function, i.e. - * ftrace_trace_function() - */ - nop - -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - .global ftrace_graph_call -ftrace_graph_call: - /* - * a placeholder for the call to a real tracing function, i.e. - * ftrace_graph_caller() - */ - nop -#endif - MCOUNT_RESTORE_REGS - .global ftrace_stub -ftrace_stub: - RETURN_BACK -STD_ENDPROC(ftrace_caller) - -#else /* ! CONFIG_DYNAMIC_FTRACE */ - - .align 64 -STD_ENTRY(__mcount) - { - moveli r11, hw2_last(ftrace_trace_function) - moveli r13, hw2_last(ftrace_stub) - } - { - shl16insli r11, r11, hw1(ftrace_trace_function) - shl16insli r13, r13, hw1(ftrace_stub) - } - { - shl16insli r11, r11, hw0(ftrace_trace_function) - shl16insli r13, r13, hw0(ftrace_stub) - } - - ld r11, r11 - sub r14, r13, r11 - bnez r14, static_trace - -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - moveli r15, hw2_last(ftrace_graph_return) - shl16insli r15, r15, hw1(ftrace_graph_return) - shl16insli r15, r15, hw0(ftrace_graph_return) - ld r15, r15 - sub r15, r15, r13 - bnez r15, ftrace_graph_caller - - { - moveli r16, hw2_last(ftrace_graph_entry) - moveli r17, hw2_last(ftrace_graph_entry_stub) - } - { - shl16insli r16, r16, hw1(ftrace_graph_entry) - shl16insli r17, r17, hw1(ftrace_graph_entry_stub) - } - { - shl16insli r16, r16, hw0(ftrace_graph_entry) - shl16insli r17, r17, hw0(ftrace_graph_entry_stub) - } - ld r16, r16 - sub r17, r16, r17 - bnez r17, ftrace_graph_caller - -#endif - RETURN_BACK - -static_trace: - MCOUNT_SAVE_REGS - - /* arg1: self return address */ - /* arg2: parent's return address */ - { move r0, lr; move r1, r10 } - - /* call ftrace_trace_function() */ - jalr r11 - - MCOUNT_RESTORE_REGS - - .global ftrace_stub -ftrace_stub: - RETURN_BACK -STD_ENDPROC(__mcount) - -#endif /* ! CONFIG_DYNAMIC_FTRACE */ - -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - -STD_ENTRY(ftrace_graph_caller) -ftrace_graph_caller: -#ifndef CONFIG_DYNAMIC_FTRACE - MCOUNT_SAVE_REGS -#endif - - /* arg1: Get the location of the parent's return address */ - addi r0, sp, 12 * REGSIZE - /* arg2: Get self return address */ - move r1, lr - - jal prepare_ftrace_return - - MCOUNT_RESTORE_REGS - RETURN_BACK -STD_ENDPROC(ftrace_graph_caller) - - .global return_to_handler -return_to_handler: - MCOUNT_SAVE_REGS - - jal ftrace_return_to_handler - /* restore the real parent address */ - move r11, r0 - - MCOUNT_RESTORE_REGS - jr r11 - -#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ diff --git a/arch/tile/kernel/messaging.c b/arch/tile/kernel/messaging.c deleted file mode 100644 index 7475af3aacec..000000000000 --- a/arch/tile/kernel/messaging.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/percpu.h> -#include <linux/smp.h> -#include <linux/hardirq.h> -#include <linux/ptrace.h> -#include <asm/hv_driver.h> -#include <asm/irq_regs.h> -#include <asm/traps.h> -#include <hv/hypervisor.h> -#include <arch/interrupts.h> - -/* All messages are stored here */ -static DEFINE_PER_CPU(HV_MsgState, msg_state); - -void init_messaging(void) -{ - /* Allocate storage for messages in kernel space */ - HV_MsgState *state = this_cpu_ptr(&msg_state); - int rc = hv_register_message_state(state); - if (rc != HV_OK) - panic("hv_register_message_state: error %d", rc); - - /* Make sure downcall interrupts will be enabled. */ - arch_local_irq_unmask(INT_INTCTRL_K); -} - -void hv_message_intr(struct pt_regs *regs, int intnum) -{ - /* - * We enter with interrupts disabled and leave them disabled, - * to match expectations of called functions (e.g. - * do_ccupdate_local() in mm/slab.c). This is also consistent - * with normal call entry for device interrupts. - */ - - int message[HV_MAX_MESSAGE_SIZE/sizeof(int)]; - HV_RcvMsgInfo rmi; - int nmsgs = 0; - - /* Track time spent here in an interrupt context */ - struct pt_regs *old_regs = set_irq_regs(regs); - irq_enter(); - -#ifdef CONFIG_DEBUG_STACKOVERFLOW - /* Debugging check for stack overflow: less than 1/8th stack free? */ - { - long sp = stack_pointer - (long) current_thread_info(); - if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) { - pr_emerg("%s: stack overflow: %ld\n", - __func__, sp - sizeof(struct thread_info)); - dump_stack(); - } - } -#endif - - while (1) { - HV_MsgState *state = this_cpu_ptr(&msg_state); - rmi = hv_receive_message(*state, (HV_VirtAddr) message, - sizeof(message)); - if (rmi.msglen == 0) - break; - - if (rmi.msglen < 0) - panic("hv_receive_message failed: %d", rmi.msglen); - - ++nmsgs; - - if (rmi.source == HV_MSG_TILE) { - int tag; - - /* we just send tags for now */ - BUG_ON(rmi.msglen != sizeof(int)); - - tag = message[0]; -#ifdef CONFIG_SMP - evaluate_message(message[0]); -#else - panic("Received IPI message %d in UP mode", tag); -#endif - } else if (rmi.source == HV_MSG_INTR) { - HV_IntrMsg *him = (HV_IntrMsg *)message; - struct hv_driver_cb *cb = - (struct hv_driver_cb *)him->intarg; - cb->callback(cb, him->intdata); - __this_cpu_inc(irq_stat.irq_hv_msg_count); - } - } - - /* - * We shouldn't have gotten a message downcall with no - * messages available. - */ - if (nmsgs == 0) - panic("Message downcall invoked with no messages!"); - - /* - * Track time spent against the current process again and - * process any softirqs if they are waiting. - */ - irq_exit(); - set_irq_regs(old_regs); -} diff --git a/arch/tile/kernel/module.c b/arch/tile/kernel/module.c deleted file mode 100644 index 09233fbe7801..000000000000 --- a/arch/tile/kernel/module.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Based on i386 version, copyright (C) 2001 Rusty Russell. - */ - -#include <linux/moduleloader.h> -#include <linux/elf.h> -#include <linux/vmalloc.h> -#include <linux/fs.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <asm/pgtable.h> -#include <asm/homecache.h> -#include <arch/opcode.h> - -#ifdef MODULE_DEBUG -#define DEBUGP printk -#else -#define DEBUGP(fmt...) -#endif - -/* - * Allocate some address space in the range MEM_MODULE_START to - * MEM_MODULE_END and populate it with memory. - */ -void *module_alloc(unsigned long size) -{ - struct page **pages; - pgprot_t prot_rwx = __pgprot(_PAGE_KERNEL | _PAGE_KERNEL_EXEC); - struct vm_struct *area; - int i = 0; - int npages; - - npages = (size + PAGE_SIZE - 1) / PAGE_SIZE; - pages = kmalloc_array(npages, sizeof(*pages), GFP_KERNEL); - if (pages == NULL) - return NULL; - for (; i < npages; ++i) { - pages[i] = alloc_page(GFP_KERNEL | __GFP_HIGHMEM); - if (!pages[i]) - goto free_pages; - } - - area = __get_vm_area(size, VM_ALLOC, MEM_MODULE_START, MEM_MODULE_END); - if (!area) - goto free_pages; - area->nr_pages = npages; - area->pages = pages; - - if (map_vm_area(area, prot_rwx, pages)) { - vunmap(area->addr); - goto free_pages; - } - - return area->addr; - free_pages: - while (--i >= 0) - __free_page(pages[i]); - kfree(pages); - return NULL; -} - - -/* Free memory returned from module_alloc */ -void module_memfree(void *module_region) -{ - vfree(module_region); - - /* Globally flush the L1 icache. */ - flush_remote(0, HV_FLUSH_EVICT_L1I, cpu_online_mask, - 0, 0, 0, NULL, NULL, 0); - - /* - * FIXME: Add module_arch_freeing_init to trim exception - * table entries. - */ -} - -#ifdef __tilegx__ -/* - * Validate that the high 16 bits of "value" is just the sign-extension of - * the low 48 bits. - */ -static int validate_hw2_last(long value, struct module *me) -{ - if (((value << 16) >> 16) != value) { - pr_warn("module %s: Out of range HW2_LAST value %#lx\n", - me->name, value); - return 0; - } - return 1; -} - -/* - * Validate that "value" isn't too big to hold in a JumpOff relocation. - */ -static int validate_jumpoff(long value) -{ - /* Determine size of jump offset. */ - int shift = __builtin_clzl(get_JumpOff_X1(create_JumpOff_X1(-1))); - - /* Check to see if it fits into the relocation slot. */ - long f = get_JumpOff_X1(create_JumpOff_X1(value)); - f = (f << shift) >> shift; - - return f == value; -} -#endif - -int apply_relocate_add(Elf_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - unsigned int i; - Elf_Rela *rel = (void *)sechdrs[relsec].sh_addr; - Elf_Sym *sym; - u64 *location; - unsigned long value; - - DEBUGP("Applying relocate section %u to %u\n", relsec, - sechdrs[relsec].sh_info); - for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { - /* This is where to make the change */ - location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr - + rel[i].r_offset; - /* - * This is the symbol it is referring to. - * Note that all undefined symbols have been resolved. - */ - sym = (Elf_Sym *)sechdrs[symindex].sh_addr - + ELF_R_SYM(rel[i].r_info); - value = sym->st_value + rel[i].r_addend; - - switch (ELF_R_TYPE(rel[i].r_info)) { - -#ifdef __LITTLE_ENDIAN -# define MUNGE(func) \ - (*location = ((*location & ~func(-1)) | func(value))) -#else -/* - * Instructions are always little-endian, so when we read them as data, - * we have to swap them around before and after modifying them. - */ -# define MUNGE(func) \ - (*location = swab64((swab64(*location) & ~func(-1)) | func(value))) -#endif - -#ifndef __tilegx__ - case R_TILE_32: - *(uint32_t *)location = value; - break; - case R_TILE_IMM16_X0_HA: - value = (value + 0x8000) >> 16; - /*FALLTHROUGH*/ - case R_TILE_IMM16_X0_LO: - MUNGE(create_Imm16_X0); - break; - case R_TILE_IMM16_X1_HA: - value = (value + 0x8000) >> 16; - /*FALLTHROUGH*/ - case R_TILE_IMM16_X1_LO: - MUNGE(create_Imm16_X1); - break; - case R_TILE_JOFFLONG_X1: - value -= (unsigned long) location; /* pc-relative */ - value = (long) value >> 3; /* count by instrs */ - MUNGE(create_JOffLong_X1); - break; -#else - case R_TILEGX_64: - *location = value; - break; - case R_TILEGX_IMM16_X0_HW2_LAST: - if (!validate_hw2_last(value, me)) - return -ENOEXEC; - value >>= 16; - /*FALLTHROUGH*/ - case R_TILEGX_IMM16_X0_HW1: - value >>= 16; - /*FALLTHROUGH*/ - case R_TILEGX_IMM16_X0_HW0: - MUNGE(create_Imm16_X0); - break; - case R_TILEGX_IMM16_X1_HW2_LAST: - if (!validate_hw2_last(value, me)) - return -ENOEXEC; - value >>= 16; - /*FALLTHROUGH*/ - case R_TILEGX_IMM16_X1_HW1: - value >>= 16; - /*FALLTHROUGH*/ - case R_TILEGX_IMM16_X1_HW0: - MUNGE(create_Imm16_X1); - break; - case R_TILEGX_JUMPOFF_X1: - value -= (unsigned long) location; /* pc-relative */ - value = (long) value >> 3; /* count by instrs */ - if (!validate_jumpoff(value)) { - pr_warn("module %s: Out of range jump to %#llx at %#llx (%p)\n", - me->name, - sym->st_value + rel[i].r_addend, - rel[i].r_offset, location); - return -ENOEXEC; - } - MUNGE(create_JumpOff_X1); - break; -#endif - -#undef MUNGE - - default: - pr_err("module %s: Unknown relocation: %d\n", - me->name, (int) ELF_R_TYPE(rel[i].r_info)); - return -ENOEXEC; - } - } - return 0; -} diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c deleted file mode 100644 index 6a1efe5543fa..000000000000 --- a/arch/tile/kernel/pci-dma.c +++ /dev/null @@ -1,607 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/mm.h> -#include <linux/dma-mapping.h> -#include <linux/swiotlb.h> -#include <linux/vmalloc.h> -#include <linux/export.h> -#include <asm/tlbflush.h> -#include <asm/homecache.h> - -/* Generic DMA mapping functions: */ - -/* - * Allocate what Linux calls "coherent" memory. On TILEPro this is - * uncached memory; on TILE-Gx it is hash-for-home memory. - */ -#ifdef __tilepro__ -#define PAGE_HOME_DMA PAGE_HOME_UNCACHED -#else -#define PAGE_HOME_DMA PAGE_HOME_HASH -#endif - -static void *tile_dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t gfp, - unsigned long attrs) -{ - u64 dma_mask = (dev && dev->coherent_dma_mask) ? - dev->coherent_dma_mask : DMA_BIT_MASK(32); - int node = dev ? dev_to_node(dev) : 0; - int order = get_order(size); - struct page *pg; - dma_addr_t addr; - - gfp |= __GFP_ZERO; - - /* - * If the mask specifies that the memory be in the first 4 GB, then - * we force the allocation to come from the DMA zone. We also - * force the node to 0 since that's the only node where the DMA - * zone isn't empty. If the mask size is smaller than 32 bits, we - * may still not be able to guarantee a suitable memory address, in - * which case we will return NULL. But such devices are uncommon. - */ - if (dma_mask <= DMA_BIT_MASK(32)) { - gfp |= GFP_DMA32; - node = 0; - } - - pg = homecache_alloc_pages_node(node, gfp, order, PAGE_HOME_DMA); - if (pg == NULL) - return NULL; - - addr = page_to_phys(pg); - if (addr + size > dma_mask) { - __homecache_free_pages(pg, order); - return NULL; - } - - *dma_handle = addr; - - return page_address(pg); -} - -/* - * Free memory that was allocated with tile_dma_alloc_coherent. - */ -static void tile_dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle, - unsigned long attrs) -{ - homecache_free_pages((unsigned long)vaddr, get_order(size)); -} - -/* - * The map routines "map" the specified address range for DMA - * accesses. The memory belongs to the device after this call is - * issued, until it is unmapped with dma_unmap_single. - * - * We don't need to do any mapping, we just flush the address range - * out of the cache and return a DMA address. - * - * The unmap routines do whatever is necessary before the processor - * accesses the memory again, and must be called before the driver - * touches the memory. We can get away with a cache invalidate if we - * can count on nothing having been touched. - */ - -/* Set up a single page for DMA access. */ -static void __dma_prep_page(struct page *page, unsigned long offset, - size_t size, enum dma_data_direction direction) -{ - /* - * Flush the page from cache if necessary. - * On tilegx, data is delivered to hash-for-home L3; on tilepro, - * data is delivered direct to memory. - * - * NOTE: If we were just doing DMA_TO_DEVICE we could optimize - * this to be a "flush" not a "finv" and keep some of the - * state in cache across the DMA operation, but it doesn't seem - * worth creating the necessary flush_buffer_xxx() infrastructure. - */ - int home = page_home(page); - switch (home) { - case PAGE_HOME_HASH: -#ifdef __tilegx__ - return; -#endif - break; - case PAGE_HOME_UNCACHED: -#ifdef __tilepro__ - return; -#endif - break; - case PAGE_HOME_IMMUTABLE: - /* Should be going to the device only. */ - BUG_ON(direction == DMA_FROM_DEVICE || - direction == DMA_BIDIRECTIONAL); - return; - case PAGE_HOME_INCOHERENT: - /* Incoherent anyway, so no need to work hard here. */ - return; - default: - BUG_ON(home < 0 || home >= NR_CPUS); - break; - } - homecache_finv_page(page); - -#ifdef DEBUG_ALIGNMENT - /* Warn if the region isn't cacheline aligned. */ - if (offset & (L2_CACHE_BYTES - 1) || (size & (L2_CACHE_BYTES - 1))) - pr_warn("Unaligned DMA to non-hfh memory: PA %#llx/%#lx\n", - PFN_PHYS(page_to_pfn(page)) + offset, size); -#endif -} - -/* Make the page ready to be read by the core. */ -static void __dma_complete_page(struct page *page, unsigned long offset, - size_t size, enum dma_data_direction direction) -{ -#ifdef __tilegx__ - switch (page_home(page)) { - case PAGE_HOME_HASH: - /* I/O device delivered data the way the cpu wanted it. */ - break; - case PAGE_HOME_INCOHERENT: - /* Incoherent anyway, so no need to work hard here. */ - break; - case PAGE_HOME_IMMUTABLE: - /* Extra read-only copies are not a problem. */ - break; - default: - /* Flush the bogus hash-for-home I/O entries to memory. */ - homecache_finv_map_page(page, PAGE_HOME_HASH); - break; - } -#endif -} - -static void __dma_prep_pa_range(dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - struct page *page = pfn_to_page(PFN_DOWN(dma_addr)); - unsigned long offset = dma_addr & (PAGE_SIZE - 1); - size_t bytes = min(size, (size_t)(PAGE_SIZE - offset)); - - while (size != 0) { - __dma_prep_page(page, offset, bytes, direction); - size -= bytes; - ++page; - offset = 0; - bytes = min((size_t)PAGE_SIZE, size); - } -} - -static void __dma_complete_pa_range(dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - struct page *page = pfn_to_page(PFN_DOWN(dma_addr)); - unsigned long offset = dma_addr & (PAGE_SIZE - 1); - size_t bytes = min(size, (size_t)(PAGE_SIZE - offset)); - - while (size != 0) { - __dma_complete_page(page, offset, bytes, direction); - size -= bytes; - ++page; - offset = 0; - bytes = min((size_t)PAGE_SIZE, size); - } -} - -static int tile_dma_map_sg(struct device *dev, struct scatterlist *sglist, - int nents, enum dma_data_direction direction, - unsigned long attrs) -{ - struct scatterlist *sg; - int i; - - BUG_ON(!valid_dma_direction(direction)); - - WARN_ON(nents == 0 || sglist->length == 0); - - for_each_sg(sglist, sg, nents, i) { - sg->dma_address = sg_phys(sg); -#ifdef CONFIG_NEED_SG_DMA_LENGTH - sg->dma_length = sg->length; -#endif - if (attrs & DMA_ATTR_SKIP_CPU_SYNC) - continue; - __dma_prep_pa_range(sg->dma_address, sg->length, direction); - } - - return nents; -} - -static void tile_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, - int nents, enum dma_data_direction direction, - unsigned long attrs) -{ - struct scatterlist *sg; - int i; - - BUG_ON(!valid_dma_direction(direction)); - for_each_sg(sglist, sg, nents, i) { - sg->dma_address = sg_phys(sg); - if (attrs & DMA_ATTR_SKIP_CPU_SYNC) - continue; - __dma_complete_pa_range(sg->dma_address, sg->length, - direction); - } -} - -static dma_addr_t tile_dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction, - unsigned long attrs) -{ - BUG_ON(!valid_dma_direction(direction)); - - BUG_ON(offset + size > PAGE_SIZE); - if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC)) - __dma_prep_page(page, offset, size, direction); - - return page_to_pa(page) + offset; -} - -static void tile_dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, enum dma_data_direction direction, - unsigned long attrs) -{ - BUG_ON(!valid_dma_direction(direction)); - - if (attrs & DMA_ATTR_SKIP_CPU_SYNC) - return; - - __dma_complete_page(pfn_to_page(PFN_DOWN(dma_address)), - dma_address & (PAGE_SIZE - 1), size, direction); -} - -static void tile_dma_sync_single_for_cpu(struct device *dev, - dma_addr_t dma_handle, - size_t size, - enum dma_data_direction direction) -{ - BUG_ON(!valid_dma_direction(direction)); - - __dma_complete_pa_range(dma_handle, size, direction); -} - -static void tile_dma_sync_single_for_device(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - __dma_prep_pa_range(dma_handle, size, direction); -} - -static void tile_dma_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sglist, int nelems, - enum dma_data_direction direction) -{ - struct scatterlist *sg; - int i; - - BUG_ON(!valid_dma_direction(direction)); - WARN_ON(nelems == 0 || sglist->length == 0); - - for_each_sg(sglist, sg, nelems, i) { - dma_sync_single_for_cpu(dev, sg->dma_address, - sg_dma_len(sg), direction); - } -} - -static void tile_dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sglist, int nelems, - enum dma_data_direction direction) -{ - struct scatterlist *sg; - int i; - - BUG_ON(!valid_dma_direction(direction)); - WARN_ON(nelems == 0 || sglist->length == 0); - - for_each_sg(sglist, sg, nelems, i) { - dma_sync_single_for_device(dev, sg->dma_address, - sg_dma_len(sg), direction); - } -} - -static const struct dma_map_ops tile_default_dma_map_ops = { - .alloc = tile_dma_alloc_coherent, - .free = tile_dma_free_coherent, - .map_page = tile_dma_map_page, - .unmap_page = tile_dma_unmap_page, - .map_sg = tile_dma_map_sg, - .unmap_sg = tile_dma_unmap_sg, - .sync_single_for_cpu = tile_dma_sync_single_for_cpu, - .sync_single_for_device = tile_dma_sync_single_for_device, - .sync_sg_for_cpu = tile_dma_sync_sg_for_cpu, - .sync_sg_for_device = tile_dma_sync_sg_for_device, -}; - -const struct dma_map_ops *tile_dma_map_ops = &tile_default_dma_map_ops; -EXPORT_SYMBOL(tile_dma_map_ops); - -/* Generic PCI DMA mapping functions */ - -static void *tile_pci_dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t gfp, - unsigned long attrs) -{ - int node = dev_to_node(dev); - int order = get_order(size); - struct page *pg; - dma_addr_t addr; - - gfp |= __GFP_ZERO; - - pg = homecache_alloc_pages_node(node, gfp, order, PAGE_HOME_DMA); - if (pg == NULL) - return NULL; - - addr = page_to_phys(pg); - - *dma_handle = addr + get_dma_offset(dev); - - return page_address(pg); -} - -/* - * Free memory that was allocated with tile_pci_dma_alloc_coherent. - */ -static void tile_pci_dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle, - unsigned long attrs) -{ - homecache_free_pages((unsigned long)vaddr, get_order(size)); -} - -static int tile_pci_dma_map_sg(struct device *dev, struct scatterlist *sglist, - int nents, enum dma_data_direction direction, - unsigned long attrs) -{ - struct scatterlist *sg; - int i; - - BUG_ON(!valid_dma_direction(direction)); - - WARN_ON(nents == 0 || sglist->length == 0); - - for_each_sg(sglist, sg, nents, i) { - sg->dma_address = sg_phys(sg); - __dma_prep_pa_range(sg->dma_address, sg->length, direction); - - sg->dma_address = sg->dma_address + get_dma_offset(dev); -#ifdef CONFIG_NEED_SG_DMA_LENGTH - sg->dma_length = sg->length; -#endif - } - - return nents; -} - -static void tile_pci_dma_unmap_sg(struct device *dev, - struct scatterlist *sglist, int nents, - enum dma_data_direction direction, - unsigned long attrs) -{ - struct scatterlist *sg; - int i; - - BUG_ON(!valid_dma_direction(direction)); - for_each_sg(sglist, sg, nents, i) { - sg->dma_address = sg_phys(sg); - __dma_complete_pa_range(sg->dma_address, sg->length, - direction); - } -} - -static dma_addr_t tile_pci_dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction, - unsigned long attrs) -{ - BUG_ON(!valid_dma_direction(direction)); - - BUG_ON(offset + size > PAGE_SIZE); - __dma_prep_page(page, offset, size, direction); - - return page_to_pa(page) + offset + get_dma_offset(dev); -} - -static void tile_pci_dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, - enum dma_data_direction direction, - unsigned long attrs) -{ - BUG_ON(!valid_dma_direction(direction)); - - dma_address -= get_dma_offset(dev); - - __dma_complete_page(pfn_to_page(PFN_DOWN(dma_address)), - dma_address & (PAGE_SIZE - 1), size, direction); -} - -static void tile_pci_dma_sync_single_for_cpu(struct device *dev, - dma_addr_t dma_handle, - size_t size, - enum dma_data_direction direction) -{ - BUG_ON(!valid_dma_direction(direction)); - - dma_handle -= get_dma_offset(dev); - - __dma_complete_pa_range(dma_handle, size, direction); -} - -static void tile_pci_dma_sync_single_for_device(struct device *dev, - dma_addr_t dma_handle, - size_t size, - enum dma_data_direction - direction) -{ - dma_handle -= get_dma_offset(dev); - - __dma_prep_pa_range(dma_handle, size, direction); -} - -static void tile_pci_dma_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sglist, - int nelems, - enum dma_data_direction direction) -{ - struct scatterlist *sg; - int i; - - BUG_ON(!valid_dma_direction(direction)); - WARN_ON(nelems == 0 || sglist->length == 0); - - for_each_sg(sglist, sg, nelems, i) { - dma_sync_single_for_cpu(dev, sg->dma_address, - sg_dma_len(sg), direction); - } -} - -static void tile_pci_dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sglist, - int nelems, - enum dma_data_direction direction) -{ - struct scatterlist *sg; - int i; - - BUG_ON(!valid_dma_direction(direction)); - WARN_ON(nelems == 0 || sglist->length == 0); - - for_each_sg(sglist, sg, nelems, i) { - dma_sync_single_for_device(dev, sg->dma_address, - sg_dma_len(sg), direction); - } -} - -static const struct dma_map_ops tile_pci_default_dma_map_ops = { - .alloc = tile_pci_dma_alloc_coherent, - .free = tile_pci_dma_free_coherent, - .map_page = tile_pci_dma_map_page, - .unmap_page = tile_pci_dma_unmap_page, - .map_sg = tile_pci_dma_map_sg, - .unmap_sg = tile_pci_dma_unmap_sg, - .sync_single_for_cpu = tile_pci_dma_sync_single_for_cpu, - .sync_single_for_device = tile_pci_dma_sync_single_for_device, - .sync_sg_for_cpu = tile_pci_dma_sync_sg_for_cpu, - .sync_sg_for_device = tile_pci_dma_sync_sg_for_device, -}; - -const struct dma_map_ops *gx_pci_dma_map_ops = &tile_pci_default_dma_map_ops; -EXPORT_SYMBOL(gx_pci_dma_map_ops); - -/* PCI DMA mapping functions for legacy PCI devices */ - -#ifdef CONFIG_SWIOTLB -static const struct dma_map_ops pci_hybrid_dma_ops = { - .alloc = swiotlb_alloc, - .free = swiotlb_free, - .map_page = tile_pci_dma_map_page, - .unmap_page = tile_pci_dma_unmap_page, - .map_sg = tile_pci_dma_map_sg, - .unmap_sg = tile_pci_dma_unmap_sg, - .sync_single_for_cpu = tile_pci_dma_sync_single_for_cpu, - .sync_single_for_device = tile_pci_dma_sync_single_for_device, - .sync_sg_for_cpu = tile_pci_dma_sync_sg_for_cpu, - .sync_sg_for_device = tile_pci_dma_sync_sg_for_device, -}; - -const struct dma_map_ops *gx_legacy_pci_dma_map_ops = &swiotlb_dma_ops; -const struct dma_map_ops *gx_hybrid_pci_dma_map_ops = &pci_hybrid_dma_ops; -#else -const struct dma_map_ops *gx_legacy_pci_dma_map_ops; -const struct dma_map_ops *gx_hybrid_pci_dma_map_ops; -#endif -EXPORT_SYMBOL(gx_legacy_pci_dma_map_ops); -EXPORT_SYMBOL(gx_hybrid_pci_dma_map_ops); - -int dma_set_mask(struct device *dev, u64 mask) -{ - const struct dma_map_ops *dma_ops = get_dma_ops(dev); - - /* - * For PCI devices with 64-bit DMA addressing capability, promote - * the dma_ops to hybrid, with the consistent memory DMA space limited - * to 32-bit. For 32-bit capable devices, limit the streaming DMA - * address range to max_direct_dma_addr. - */ - if (dma_ops == gx_pci_dma_map_ops || - dma_ops == gx_hybrid_pci_dma_map_ops || - dma_ops == gx_legacy_pci_dma_map_ops) { - if (mask == DMA_BIT_MASK(64) && - dma_ops == gx_legacy_pci_dma_map_ops) - set_dma_ops(dev, gx_hybrid_pci_dma_map_ops); - else if (mask > dev->archdata.max_direct_dma_addr) - mask = dev->archdata.max_direct_dma_addr; - } - - if (!dev->dma_mask || !dma_supported(dev, mask)) - return -EIO; - - *dev->dma_mask = mask; - - return 0; -} -EXPORT_SYMBOL(dma_set_mask); - -#ifdef CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK -int dma_set_coherent_mask(struct device *dev, u64 mask) -{ - const struct dma_map_ops *dma_ops = get_dma_ops(dev); - - /* - * For PCI devices with 64-bit DMA addressing capability, promote - * the dma_ops to full capability for both streams and consistent - * memory access. For 32-bit capable devices, limit the consistent - * memory DMA range to max_direct_dma_addr. - */ - if (dma_ops == gx_pci_dma_map_ops || - dma_ops == gx_hybrid_pci_dma_map_ops || - dma_ops == gx_legacy_pci_dma_map_ops) { - if (mask == DMA_BIT_MASK(64)) - set_dma_ops(dev, gx_pci_dma_map_ops); - else if (mask > dev->archdata.max_direct_dma_addr) - mask = dev->archdata.max_direct_dma_addr; - } - - if (!dma_supported(dev, mask)) - return -EIO; - dev->coherent_dma_mask = mask; - return 0; -} -EXPORT_SYMBOL(dma_set_coherent_mask); -#endif - -#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK -/* - * The generic dma_get_required_mask() uses the highest physical address - * (max_pfn) to provide the hint to the PCI drivers regarding 32-bit or - * 64-bit DMA configuration. Since TILEGx has I/O TLB/MMU, allowing the - * DMAs to use the full 64-bit PCI address space and not limited by - * the physical memory space, we always let the PCI devices use - * 64-bit DMA if they have that capability, by returning the 64-bit - * DMA mask here. The device driver has the option to use 32-bit DMA if - * the device is not capable of 64-bit DMA. - */ -u64 dma_get_required_mask(struct device *dev) -{ - return DMA_BIT_MASK(64); -} -EXPORT_SYMBOL_GPL(dma_get_required_mask); -#endif diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c deleted file mode 100644 index bbf81579b1f8..000000000000 --- a/arch/tile/kernel/pci.c +++ /dev/null @@ -1,592 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/capability.h> -#include <linux/sched.h> -#include <linux/errno.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/uaccess.h> -#include <linux/export.h> - -#include <asm/processor.h> -#include <asm/sections.h> -#include <asm/byteorder.h> -#include <asm/hv_driver.h> -#include <hv/drv_pcie_rc_intf.h> - - -/* - * Initialization flow and process - * ------------------------------- - * - * This files contains the routines to search for PCI buses, - * enumerate the buses, and configure any attached devices. - * - * There are two entry points here: - * 1) tile_pci_init - * This sets up the pci_controller structs, and opens the - * FDs to the hypervisor. This is called from setup_arch() early - * in the boot process. - * 2) pcibios_init - * This probes the PCI bus(es) for any attached hardware. It's - * called by subsys_initcall. All of the real work is done by the - * generic Linux PCI layer. - * - */ - -static int pci_probe = 1; - -/* - * This flag tells if the platform is TILEmpower that needs - * special configuration for the PLX switch chip. - */ -int __ro_after_init tile_plx_gen1; - -static struct pci_controller controllers[TILE_NUM_PCIE]; -static int num_controllers; -static int pci_scan_flags[TILE_NUM_PCIE]; - -static struct pci_ops tile_cfg_ops; - - -/* - * Open a FD to the hypervisor PCI device. - * - * controller_id is the controller number, config type is 0 or 1 for - * config0 or config1 operations. - */ -static int tile_pcie_open(int controller_id, int config_type) -{ - char filename[32]; - int fd; - - sprintf(filename, "pcie/%d/config%d", controller_id, config_type); - - fd = hv_dev_open((HV_VirtAddr)filename, 0); - - return fd; -} - - -/* - * Get the IRQ numbers from the HV and set up the handlers for them. - */ -static int tile_init_irqs(int controller_id, struct pci_controller *controller) -{ - char filename[32]; - int fd; - int ret; - int x; - struct pcie_rc_config rc_config; - - sprintf(filename, "pcie/%d/ctl", controller_id); - fd = hv_dev_open((HV_VirtAddr)filename, 0); - if (fd < 0) { - pr_err("PCI: hv_dev_open(%s) failed\n", filename); - return -1; - } - ret = hv_dev_pread(fd, 0, (HV_VirtAddr)(&rc_config), - sizeof(rc_config), PCIE_RC_CONFIG_MASK_OFF); - hv_dev_close(fd); - if (ret != sizeof(rc_config)) { - pr_err("PCI: wanted %zd bytes, got %d\n", - sizeof(rc_config), ret); - return -1; - } - /* Record irq_base so that we can map INTx to IRQ # later. */ - controller->irq_base = rc_config.intr; - - for (x = 0; x < 4; x++) - tile_irq_activate(rc_config.intr + x, - TILE_IRQ_HW_CLEAR); - - if (rc_config.plx_gen1) - controller->plx_gen1 = 1; - - return 0; -} - -/* - * First initialization entry point, called from setup_arch(). - * - * Find valid controllers and fill in pci_controller structs for each - * of them. - * - * Returns the number of controllers discovered. - */ -int __init tile_pci_init(void) -{ - int i; - - if (!pci_probe) { - pr_info("PCI: disabled by boot argument\n"); - return 0; - } - - pr_info("PCI: Searching for controllers...\n"); - - /* Re-init number of PCIe controllers to support hot-plug feature. */ - num_controllers = 0; - - /* Do any configuration we need before using the PCIe */ - - for (i = 0; i < TILE_NUM_PCIE; i++) { - /* - * To see whether we need a real config op based on - * the results of pcibios_init(), to support PCIe hot-plug. - */ - if (pci_scan_flags[i] == 0) { - int hv_cfg_fd0 = -1; - int hv_cfg_fd1 = -1; - int hv_mem_fd = -1; - char name[32]; - struct pci_controller *controller; - - /* - * Open the fd to the HV. If it fails then this - * device doesn't exist. - */ - hv_cfg_fd0 = tile_pcie_open(i, 0); - if (hv_cfg_fd0 < 0) - continue; - hv_cfg_fd1 = tile_pcie_open(i, 1); - if (hv_cfg_fd1 < 0) { - pr_err("PCI: Couldn't open config fd to HV for controller %d\n", - i); - goto err_cont; - } - - sprintf(name, "pcie/%d/mem", i); - hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0); - if (hv_mem_fd < 0) { - pr_err("PCI: Could not open mem fd to HV!\n"); - goto err_cont; - } - - pr_info("PCI: Found PCI controller #%d\n", i); - - controller = &controllers[i]; - - controller->index = i; - controller->hv_cfg_fd[0] = hv_cfg_fd0; - controller->hv_cfg_fd[1] = hv_cfg_fd1; - controller->hv_mem_fd = hv_mem_fd; - controller->last_busno = 0xff; - controller->ops = &tile_cfg_ops; - - num_controllers++; - continue; - -err_cont: - if (hv_cfg_fd0 >= 0) - hv_dev_close(hv_cfg_fd0); - if (hv_cfg_fd1 >= 0) - hv_dev_close(hv_cfg_fd1); - if (hv_mem_fd >= 0) - hv_dev_close(hv_mem_fd); - continue; - } - } - - /* - * Before using the PCIe, see if we need to do any platform-specific - * configuration, such as the PLX switch Gen 1 issue on TILEmpower. - */ - for (i = 0; i < num_controllers; i++) { - struct pci_controller *controller = &controllers[i]; - - if (controller->plx_gen1) - tile_plx_gen1 = 1; - } - - return num_controllers; -} - -/* - * (pin - 1) converts from the PCI standard's [1:4] convention to - * a normal [0:3] range. - */ -static int tile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - struct pci_controller *controller = - (struct pci_controller *)dev->sysdata; - return (pin - 1) + controller->irq_base; -} - - -static void fixup_read_and_payload_sizes(void) -{ - struct pci_dev *dev = NULL; - int smallest_max_payload = 0x1; /* Tile maxes out at 256 bytes. */ - int max_read_size = PCI_EXP_DEVCTL_READRQ_512B; - u16 new_values; - - /* Scan for the smallest maximum payload size. */ - for_each_pci_dev(dev) { - if (!pci_is_pcie(dev)) - continue; - - if (dev->pcie_mpss < smallest_max_payload) - smallest_max_payload = dev->pcie_mpss; - } - - /* Now, set the max_payload_size for all devices to that value. */ - new_values = max_read_size | (smallest_max_payload << 5); - for_each_pci_dev(dev) - pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL, - PCI_EXP_DEVCTL_PAYLOAD | PCI_EXP_DEVCTL_READRQ, - new_values); -} - - -/* - * Second PCI initialization entry point, called by subsys_initcall. - * - * The controllers have been set up by the time we get here, by a call to - * tile_pci_init. - */ -int __init pcibios_init(void) -{ - struct pci_host_bridge *bridge; - int i; - - pr_info("PCI: Probing PCI hardware\n"); - - /* - * Delay a bit in case devices aren't ready. Some devices are - * known to require at least 20ms here, but we use a more - * conservative value. - */ - msleep(250); - - /* Scan all of the recorded PCI controllers. */ - for (i = 0; i < TILE_NUM_PCIE; i++) { - /* - * Do real pcibios init ops if the controller is initialized - * by tile_pci_init() successfully and not initialized by - * pcibios_init() yet to support PCIe hot-plug. - */ - if (pci_scan_flags[i] == 0 && controllers[i].ops != NULL) { - struct pci_controller *controller = &controllers[i]; - struct pci_bus *bus; - LIST_HEAD(resources); - - if (tile_init_irqs(i, controller)) { - pr_err("PCI: Could not initialize IRQs\n"); - continue; - } - - pr_info("PCI: initializing controller #%d\n", i); - - pci_add_resource(&resources, &ioport_resource); - pci_add_resource(&resources, &iomem_resource); - - bridge = pci_alloc_host_bridge(0); - if (!bridge) - break; - - list_splice_init(&resources, &bridge->windows); - bridge->dev.parent = NULL; - bridge->sysdata = controller; - bridge->busnr = 0; - bridge->ops = controller->ops; - bridge->swizzle_irq = pci_common_swizzle; - bridge->map_irq = tile_map_irq; - - pci_scan_root_bus_bridge(bridge); - bus = bridge->bus; - controller->root_bus = bus; - controller->last_busno = bus->busn_res.end; - } - } - - /* - * This comes from the generic Linux PCI driver. - * - * It allocates all of the resources (I/O memory, etc) - * associated with the devices read in above. - */ - pci_assign_unassigned_resources(); - - /* Configure the max_read_size and max_payload_size values. */ - fixup_read_and_payload_sizes(); - - /* Record the I/O resources in the PCI controller structure. */ - for (i = 0; i < TILE_NUM_PCIE; i++) { - /* - * Do real pcibios init ops if the controller is initialized - * by tile_pci_init() successfully and not initialized by - * pcibios_init() yet to support PCIe hot-plug. - */ - if (pci_scan_flags[i] == 0 && controllers[i].ops != NULL) { - struct pci_bus *root_bus = controllers[i].root_bus; - struct pci_bus *next_bus; - struct pci_dev *dev; - - pci_bus_add_devices(root_bus); - - list_for_each_entry(dev, &root_bus->devices, bus_list) { - /* - * Find the PCI host controller, ie. the 1st - * bridge. - */ - if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && - (PCI_SLOT(dev->devfn) == 0)) { - next_bus = dev->subordinate; - controllers[i].mem_resources[0] = - *next_bus->resource[0]; - controllers[i].mem_resources[1] = - *next_bus->resource[1]; - controllers[i].mem_resources[2] = - *next_bus->resource[2]; - - /* Setup flags. */ - pci_scan_flags[i] = 1; - - break; - } - } - } - } - - return 0; -} -subsys_initcall(pcibios_init); - -void pcibios_set_master(struct pci_dev *dev) -{ - /* No special bus mastering setup handling. */ -} - -/* Process any "pci=" kernel boot arguments. */ -char *__init pcibios_setup(char *str) -{ - if (!strcmp(str, "off")) { - pci_probe = 0; - return NULL; - } - return str; -} - -/* - * Enable memory and/or address decoding, as appropriate, for the - * device described by the 'dev' struct. - * - * This is called from the generic PCI layer, and can be called - * for bridges or endpoints. - */ -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - u16 cmd, old_cmd; - u8 header_type; - int i; - struct resource *r; - - pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type); - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { - /* - * For bridges, we enable both memory and I/O decoding - * in call cases. - */ - cmd |= PCI_COMMAND_IO; - cmd |= PCI_COMMAND_MEMORY; - } else { - /* - * For endpoints, we enable memory and/or I/O decoding - * only if they have a memory resource of that type. - */ - for (i = 0; i < 6; i++) { - r = &dev->resource[i]; - if (r->flags & IORESOURCE_UNSET) { - pr_err("PCI: Device %s not available because of resource collisions\n", - pci_name(dev)); - return -EINVAL; - } - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - } - - /* - * We only write the command if it changed. - */ - if (cmd != old_cmd) - pci_write_config_word(dev, PCI_COMMAND, cmd); - return 0; -} - -/**************************************************************** - * - * Tile PCI config space read/write routines - * - ****************************************************************/ - -/* - * These are the normal read and write ops - * These are expanded with macros from pci_bus_read_config_byte() etc. - * - * devfn is the combined PCI slot & function. - * - * offset is in bytes, from the start of config space for the - * specified bus & slot. - */ - -static int tile_cfg_read(struct pci_bus *bus, unsigned int devfn, int offset, - int size, u32 *val) -{ - struct pci_controller *controller = bus->sysdata; - int busnum = bus->number & 0xff; - int slot = (devfn >> 3) & 0x1f; - int function = devfn & 0x7; - u32 addr; - int config_mode = 1; - - /* - * There is no bridge between the Tile and bus 0, so we - * use config0 to talk to bus 0. - * - * If we're talking to a bus other than zero then we - * must have found a bridge. - */ - if (busnum == 0) { - /* - * We fake an empty slot for (busnum == 0) && (slot > 0), - * since there is only one slot on bus 0. - */ - if (slot) { - *val = 0xFFFFFFFF; - return 0; - } - config_mode = 0; - } - - addr = busnum << 20; /* Bus in 27:20 */ - addr |= slot << 15; /* Slot (device) in 19:15 */ - addr |= function << 12; /* Function is in 14:12 */ - addr |= (offset & 0xFFF); /* byte address in 0:11 */ - - return hv_dev_pread(controller->hv_cfg_fd[config_mode], 0, - (HV_VirtAddr)(val), size, addr); -} - - -/* - * See tile_cfg_read() for relevant comments. - * Note that "val" is the value to write, not a pointer to that value. - */ -static int tile_cfg_write(struct pci_bus *bus, unsigned int devfn, int offset, - int size, u32 val) -{ - struct pci_controller *controller = bus->sysdata; - int busnum = bus->number & 0xff; - int slot = (devfn >> 3) & 0x1f; - int function = devfn & 0x7; - u32 addr; - int config_mode = 1; - HV_VirtAddr valp = (HV_VirtAddr)&val; - - /* - * For bus 0 slot 0 we use config 0 accesses. - */ - if (busnum == 0) { - /* - * We fake an empty slot for (busnum == 0) && (slot > 0), - * since there is only one slot on bus 0. - */ - if (slot) - return 0; - config_mode = 0; - } - - addr = busnum << 20; /* Bus in 27:20 */ - addr |= slot << 15; /* Slot (device) in 19:15 */ - addr |= function << 12; /* Function is in 14:12 */ - addr |= (offset & 0xFFF); /* byte address in 0:11 */ - -#ifdef __BIG_ENDIAN - /* Point to the correct part of the 32-bit "val". */ - valp += 4 - size; -#endif - - return hv_dev_pwrite(controller->hv_cfg_fd[config_mode], 0, - valp, size, addr); -} - - -static struct pci_ops tile_cfg_ops = { - .read = tile_cfg_read, - .write = tile_cfg_write, -}; - - -/* - * In the following, each PCI controller's mem_resources[1] - * represents its (non-prefetchable) PCI memory resource. - * mem_resources[0] and mem_resources[2] refer to its PCI I/O and - * prefetchable PCI memory resources, respectively. - * For more details, see pci_setup_bridge() in setup-bus.c. - * By comparing the target PCI memory address against the - * end address of controller 0, we can determine the controller - * that should accept the PCI memory access. - */ -#define TILE_READ(size, type) \ -type _tile_read##size(unsigned long addr) \ -{ \ - type val; \ - int idx = 0; \ - if (addr > controllers[0].mem_resources[1].end && \ - addr > controllers[0].mem_resources[2].end) \ - idx = 1; \ - if (hv_dev_pread(controllers[idx].hv_mem_fd, 0, \ - (HV_VirtAddr)(&val), sizeof(type), addr)) \ - pr_err("PCI: read %zd bytes at 0x%lX failed\n", \ - sizeof(type), addr); \ - return val; \ -} \ -EXPORT_SYMBOL(_tile_read##size) - -TILE_READ(b, u8); -TILE_READ(w, u16); -TILE_READ(l, u32); -TILE_READ(q, u64); - -#define TILE_WRITE(size, type) \ -void _tile_write##size(type val, unsigned long addr) \ -{ \ - int idx = 0; \ - if (addr > controllers[0].mem_resources[1].end && \ - addr > controllers[0].mem_resources[2].end) \ - idx = 1; \ - if (hv_dev_pwrite(controllers[idx].hv_mem_fd, 0, \ - (HV_VirtAddr)(&val), sizeof(type), addr)) \ - pr_err("PCI: write %zd bytes at 0x%lX failed\n", \ - sizeof(type), addr); \ -} \ -EXPORT_SYMBOL(_tile_write##size) - -TILE_WRITE(b, u8); -TILE_WRITE(w, u16); -TILE_WRITE(l, u32); -TILE_WRITE(q, u64); diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c deleted file mode 100644 index 9aa238ac7b35..000000000000 --- a/arch/tile/kernel/pci_gx.c +++ /dev/null @@ -1,1592 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/kernel.h> -#include <linux/mmzone.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/capability.h> -#include <linux/sched.h> -#include <linux/errno.h> -#include <linux/irq.h> -#include <linux/msi.h> -#include <linux/io.h> -#include <linux/uaccess.h> -#include <linux/ctype.h> - -#include <asm/processor.h> -#include <asm/sections.h> -#include <asm/byteorder.h> - -#include <gxio/iorpc_globals.h> -#include <gxio/kiorpc.h> -#include <gxio/trio.h> -#include <gxio/iorpc_trio.h> -#include <hv/drv_trio_intf.h> - -#include <arch/sim.h> - -/* - * This file contains the routines to search for PCI buses, - * enumerate the buses, and configure any attached devices. - */ - -#define DEBUG_PCI_CFG 0 - -#if DEBUG_PCI_CFG -#define TRACE_CFG_WR(size, val, bus, dev, func, offset) \ - pr_info("CFG WR %d-byte VAL %#x to bus %d dev %d func %d addr %u\n", \ - size, val, bus, dev, func, offset & 0xFFF); -#define TRACE_CFG_RD(size, val, bus, dev, func, offset) \ - pr_info("CFG RD %d-byte VAL %#x from bus %d dev %d func %d addr %u\n", \ - size, val, bus, dev, func, offset & 0xFFF); -#else -#define TRACE_CFG_WR(...) -#define TRACE_CFG_RD(...) -#endif - -static int pci_probe = 1; - -/* Information on the PCIe RC ports configuration. */ -static int pcie_rc[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES]; - -/* - * On some platforms with one or more Gx endpoint ports, we need to - * delay the PCIe RC port probe for a few seconds to work around - * a HW PCIe link-training bug. The exact delay is specified with - * a kernel boot argument in the form of "pcie_rc_delay=T,P,S", - * where T is the TRIO instance number, P is the port number and S is - * the delay in seconds. If the argument is specified, but the delay is - * not provided, the value will be DEFAULT_RC_DELAY. - */ -static int rc_delay[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES]; - -/* Default number of seconds that the PCIe RC port probe can be delayed. */ -#define DEFAULT_RC_DELAY 10 - -/* The PCI I/O space size in each PCI domain. */ -#define IO_SPACE_SIZE 0x10000 - -/* Provide shorter versions of some very long constant names. */ -#define AUTO_CONFIG_RC \ - TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC -#define AUTO_CONFIG_RC_G1 \ - TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC_G1 -#define AUTO_CONFIG_EP \ - TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT -#define AUTO_CONFIG_EP_G1 \ - TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT_G1 - -/* Array of the PCIe ports configuration info obtained from the BIB. */ -struct pcie_trio_ports_property pcie_ports[TILEGX_NUM_TRIO]; - -/* Number of configured TRIO instances. */ -int num_trio_shims; - -/* All drivers share the TRIO contexts defined here. */ -gxio_trio_context_t trio_contexts[TILEGX_NUM_TRIO]; - -/* Pointer to an array of PCIe RC controllers. */ -struct pci_controller pci_controllers[TILEGX_NUM_TRIO * TILEGX_TRIO_PCIES]; -int num_rc_controllers; - -static struct pci_ops tile_cfg_ops; - -/* Mask of CPUs that should receive PCIe interrupts. */ -static struct cpumask intr_cpus_map; - -/* - * Pick a CPU to receive and handle the PCIe interrupts, based on the IRQ #. - * For now, we simply send interrupts to non-dataplane CPUs. - * We may implement methods to allow user to specify the target CPUs, - * e.g. via boot arguments. - */ -static int tile_irq_cpu(int irq) -{ - unsigned int count; - int i = 0; - int cpu; - - count = cpumask_weight(&intr_cpus_map); - if (unlikely(count == 0)) { - pr_warn("intr_cpus_map empty, interrupts will be delivered to dataplane tiles\n"); - return irq % (smp_height * smp_width); - } - - count = irq % count; - for_each_cpu(cpu, &intr_cpus_map) { - if (i++ == count) - break; - } - return cpu; -} - -/* Open a file descriptor to the TRIO shim. */ -static int tile_pcie_open(int trio_index) -{ - gxio_trio_context_t *context = &trio_contexts[trio_index]; - int ret; - int mac; - - /* This opens a file descriptor to the TRIO shim. */ - ret = gxio_trio_init(context, trio_index); - if (ret < 0) - goto gxio_trio_init_failure; - - /* Allocate an ASID for the kernel. */ - ret = gxio_trio_alloc_asids(context, 1, 0, 0); - if (ret < 0) { - pr_err("PCI: ASID alloc failure on TRIO %d, give up\n", - trio_index); - goto asid_alloc_failure; - } - - context->asid = ret; - -#ifdef USE_SHARED_PCIE_CONFIG_REGION - /* - * Alloc a PIO region for config access, shared by all MACs per TRIO. - * This shouldn't fail since the kernel is supposed to the first - * client of the TRIO's PIO regions. - */ - ret = gxio_trio_alloc_pio_regions(context, 1, 0, 0); - if (ret < 0) { - pr_err("PCI: CFG PIO alloc failure on TRIO %d, give up\n", - trio_index); - goto pio_alloc_failure; - } - - context->pio_cfg_index = ret; - - /* - * For PIO CFG, the bus_address_hi parameter is 0. The mac parameter - * is also 0 because it is specified in PIO_REGION_SETUP_CFG_ADDR. - */ - ret = gxio_trio_init_pio_region_aux(context, context->pio_cfg_index, - 0, 0, HV_TRIO_PIO_FLAG_CONFIG_SPACE); - if (ret < 0) { - pr_err("PCI: CFG PIO init failure on TRIO %d, give up\n", - trio_index); - goto pio_alloc_failure; - } -#endif - - /* Get the properties of the PCIe ports on this TRIO instance. */ - ret = gxio_trio_get_port_property(context, &pcie_ports[trio_index]); - if (ret < 0) { - pr_err("PCI: PCIE_GET_PORT_PROPERTY failure, error %d, on TRIO %d\n", - ret, trio_index); - goto get_port_property_failure; - } - - context->mmio_base_mac = - iorpc_ioremap(context->fd, 0, HV_TRIO_CONFIG_IOREMAP_SIZE); - if (context->mmio_base_mac == NULL) { - pr_err("PCI: TRIO config space mapping failure, error %d, on TRIO %d\n", - ret, trio_index); - ret = -ENOMEM; - - goto trio_mmio_mapping_failure; - } - - /* Check the port strap state which will override the BIB setting. */ - for (mac = 0; mac < TILEGX_TRIO_PCIES; mac++) { - TRIO_PCIE_INTFC_PORT_CONFIG_t port_config; - unsigned int reg_offset; - - /* Ignore ports that are not specified in the BIB. */ - if (!pcie_ports[trio_index].ports[mac].allow_rc && - !pcie_ports[trio_index].ports[mac].allow_ep) - continue; - - reg_offset = - (TRIO_PCIE_INTFC_PORT_CONFIG << - TRIO_CFG_REGION_ADDR__REG_SHIFT) | - (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << - TRIO_CFG_REGION_ADDR__INTFC_SHIFT) | - (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); - - port_config.word = - __gxio_mmio_read(context->mmio_base_mac + reg_offset); - - if (port_config.strap_state != AUTO_CONFIG_RC && - port_config.strap_state != AUTO_CONFIG_RC_G1) { - /* - * If this is really intended to be an EP port, record - * it so that the endpoint driver will know about it. - */ - if (port_config.strap_state == AUTO_CONFIG_EP || - port_config.strap_state == AUTO_CONFIG_EP_G1) - pcie_ports[trio_index].ports[mac].allow_ep = 1; - } - } - - return ret; - -trio_mmio_mapping_failure: -get_port_property_failure: -asid_alloc_failure: -#ifdef USE_SHARED_PCIE_CONFIG_REGION -pio_alloc_failure: -#endif - hv_dev_close(context->fd); -gxio_trio_init_failure: - context->fd = -1; - - return ret; -} - -static int __init tile_trio_init(void) -{ - int i; - - /* We loop over all the TRIO shims. */ - for (i = 0; i < TILEGX_NUM_TRIO; i++) { - if (tile_pcie_open(i) < 0) - continue; - num_trio_shims++; - } - - return 0; -} -postcore_initcall(tile_trio_init); - -static void tilegx_legacy_irq_ack(struct irq_data *d) -{ - __insn_mtspr(SPR_IPI_EVENT_RESET_K, 1UL << d->irq); -} - -static void tilegx_legacy_irq_mask(struct irq_data *d) -{ - __insn_mtspr(SPR_IPI_MASK_SET_K, 1UL << d->irq); -} - -static void tilegx_legacy_irq_unmask(struct irq_data *d) -{ - __insn_mtspr(SPR_IPI_MASK_RESET_K, 1UL << d->irq); -} - -static struct irq_chip tilegx_legacy_irq_chip = { - .name = "tilegx_legacy_irq", - .irq_ack = tilegx_legacy_irq_ack, - .irq_mask = tilegx_legacy_irq_mask, - .irq_unmask = tilegx_legacy_irq_unmask, - - /* TBD: support set_affinity. */ -}; - -/* - * This is a wrapper function of the kernel level-trigger interrupt - * handler handle_level_irq() for PCI legacy interrupts. The TRIO - * is configured such that only INTx Assert interrupts are proxied - * to Linux which just calls handle_level_irq() after clearing the - * MAC INTx Assert status bit associated with this interrupt. - */ -static void trio_handle_level_irq(struct irq_desc *desc) -{ - struct pci_controller *controller = irq_desc_get_handler_data(desc); - gxio_trio_context_t *trio_context = controller->trio; - uint64_t intx = (uint64_t)irq_desc_get_chip_data(desc); - int mac = controller->mac; - unsigned int reg_offset; - uint64_t level_mask; - - handle_level_irq(desc); - - /* - * Clear the INTx Level status, otherwise future interrupts are - * not sent. - */ - reg_offset = (TRIO_PCIE_INTFC_MAC_INT_STS << - TRIO_CFG_REGION_ADDR__REG_SHIFT) | - (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << - TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | - (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); - - level_mask = TRIO_PCIE_INTFC_MAC_INT_STS__INT_LEVEL_MASK << intx; - - __gxio_mmio_write(trio_context->mmio_base_mac + reg_offset, level_mask); -} - -/* - * Create kernel irqs and set up the handlers for the legacy interrupts. - * Also some minimum initialization for the MSI support. - */ -static int tile_init_irqs(struct pci_controller *controller) -{ - int i; - int j; - int irq; - int result; - - cpumask_copy(&intr_cpus_map, cpu_online_mask); - - - for (i = 0; i < 4; i++) { - gxio_trio_context_t *context = controller->trio; - int cpu; - - /* Ask the kernel to allocate an IRQ. */ - irq = irq_alloc_hwirq(-1); - if (!irq) { - pr_err("PCI: no free irq vectors, failed for %d\n", i); - goto free_irqs; - } - controller->irq_intx_table[i] = irq; - - /* Distribute the 4 IRQs to different tiles. */ - cpu = tile_irq_cpu(irq); - - /* Configure the TRIO intr binding for this IRQ. */ - result = gxio_trio_config_legacy_intr(context, cpu_x(cpu), - cpu_y(cpu), KERNEL_PL, - irq, controller->mac, i); - if (result < 0) { - pr_err("PCI: MAC intx config failed for %d\n", i); - - goto free_irqs; - } - - /* Register the IRQ handler with the kernel. */ - irq_set_chip_and_handler(irq, &tilegx_legacy_irq_chip, - trio_handle_level_irq); - irq_set_chip_data(irq, (void *)(uint64_t)i); - irq_set_handler_data(irq, controller); - } - - return 0; - -free_irqs: - for (j = 0; j < i; j++) - irq_free_hwirq(controller->irq_intx_table[j]); - - return -1; -} - -/* - * Return 1 if the port is strapped to operate in RC mode. - */ -static int -strapped_for_rc(gxio_trio_context_t *trio_context, int mac) -{ - TRIO_PCIE_INTFC_PORT_CONFIG_t port_config; - unsigned int reg_offset; - - /* Check the port configuration. */ - reg_offset = - (TRIO_PCIE_INTFC_PORT_CONFIG << - TRIO_CFG_REGION_ADDR__REG_SHIFT) | - (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << - TRIO_CFG_REGION_ADDR__INTFC_SHIFT) | - (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); - port_config.word = - __gxio_mmio_read(trio_context->mmio_base_mac + reg_offset); - - if (port_config.strap_state == AUTO_CONFIG_RC || - port_config.strap_state == AUTO_CONFIG_RC_G1) - return 1; - else - return 0; -} - -/* - * Find valid controllers and fill in pci_controller structs for each - * of them. - * - * Return the number of controllers discovered. - */ -int __init tile_pci_init(void) -{ - int ctl_index = 0; - int i, j; - - if (!pci_probe) { - pr_info("PCI: disabled by boot argument\n"); - return 0; - } - - pr_info("PCI: Searching for controllers...\n"); - - if (num_trio_shims == 0 || sim_is_simulator()) - return 0; - - /* - * Now determine which PCIe ports are configured to operate in RC - * mode. There is a difference in the port configuration capability - * between the Gx36 and Gx72 devices. - * - * The Gx36 has configuration capability for each of the 3 PCIe - * interfaces (disable, auto endpoint, auto RC, etc.). - * On the Gx72, you can only select one of the 3 PCIe interfaces per - * TRIO to train automatically. Further, the allowable training modes - * are reduced to four options (auto endpoint, auto RC, stream x1, - * stream x4). - * - * For Gx36 ports, it must be allowed to be in RC mode by the - * Board Information Block, and the hardware strapping pins must be - * set to RC mode. - * - * For Gx72 ports, the port will operate in RC mode if either of the - * following is true: - * 1. It is allowed to be in RC mode by the Board Information Block, - * and the BIB doesn't allow the EP mode. - * 2. It is allowed to be in either the RC or the EP mode by the BIB, - * and the hardware strapping pin is set to RC mode. - */ - for (i = 0; i < TILEGX_NUM_TRIO; i++) { - gxio_trio_context_t *context = &trio_contexts[i]; - - if (context->fd < 0) - continue; - - for (j = 0; j < TILEGX_TRIO_PCIES; j++) { - int is_rc = 0; - - if (pcie_ports[i].is_gx72 && - pcie_ports[i].ports[j].allow_rc) { - if (!pcie_ports[i].ports[j].allow_ep || - strapped_for_rc(context, j)) - is_rc = 1; - } else if (pcie_ports[i].ports[j].allow_rc && - strapped_for_rc(context, j)) { - is_rc = 1; - } - if (is_rc) { - pcie_rc[i][j] = 1; - num_rc_controllers++; - } - } - } - - /* Return if no PCIe ports are configured to operate in RC mode. */ - if (num_rc_controllers == 0) - return 0; - - /* Set the TRIO pointer and MAC index for each PCIe RC port. */ - for (i = 0; i < TILEGX_NUM_TRIO; i++) { - for (j = 0; j < TILEGX_TRIO_PCIES; j++) { - if (pcie_rc[i][j]) { - pci_controllers[ctl_index].trio = - &trio_contexts[i]; - pci_controllers[ctl_index].mac = j; - pci_controllers[ctl_index].trio_index = i; - ctl_index++; - if (ctl_index == num_rc_controllers) - goto out; - } - } - } - -out: - /* Configure each PCIe RC port. */ - for (i = 0; i < num_rc_controllers; i++) { - - /* Configure the PCIe MAC to run in RC mode. */ - struct pci_controller *controller = &pci_controllers[i]; - - controller->index = i; - controller->ops = &tile_cfg_ops; - - controller->io_space.start = PCIBIOS_MIN_IO + - (i * IO_SPACE_SIZE); - controller->io_space.end = controller->io_space.start + - IO_SPACE_SIZE - 1; - BUG_ON(controller->io_space.end > IO_SPACE_LIMIT); - controller->io_space.flags = IORESOURCE_IO; - snprintf(controller->io_space_name, - sizeof(controller->io_space_name), - "PCI I/O domain %d", i); - controller->io_space.name = controller->io_space_name; - - /* - * The PCI memory resource is located above the PA space. - * For every host bridge, the BAR window or the MMIO aperture - * is in range [3GB, 4GB - 1] of a 4GB space beyond the - * PA space. - */ - controller->mem_offset = TILE_PCI_MEM_START + - (i * TILE_PCI_BAR_WINDOW_TOP); - controller->mem_space.start = controller->mem_offset + - TILE_PCI_BAR_WINDOW_TOP - TILE_PCI_BAR_WINDOW_SIZE; - controller->mem_space.end = controller->mem_offset + - TILE_PCI_BAR_WINDOW_TOP - 1; - controller->mem_space.flags = IORESOURCE_MEM; - snprintf(controller->mem_space_name, - sizeof(controller->mem_space_name), - "PCI mem domain %d", i); - controller->mem_space.name = controller->mem_space_name; - } - - return num_rc_controllers; -} - -/* - * (pin - 1) converts from the PCI standard's [1:4] convention to - * a normal [0:3] range. - */ -static int tile_map_irq(const struct pci_dev *dev, u8 device, u8 pin) -{ - struct pci_controller *controller = - (struct pci_controller *)dev->sysdata; - return controller->irq_intx_table[pin - 1]; -} - -static void fixup_read_and_payload_sizes(struct pci_controller *controller) -{ - gxio_trio_context_t *trio_context = controller->trio; - struct pci_bus *root_bus = controller->root_bus; - TRIO_PCIE_RC_DEVICE_CONTROL_t dev_control; - TRIO_PCIE_RC_DEVICE_CAP_t rc_dev_cap; - unsigned int reg_offset; - struct pci_bus *child; - int mac; - int err; - - mac = controller->mac; - - /* Set our max read request size to be 4KB. */ - reg_offset = - (TRIO_PCIE_RC_DEVICE_CONTROL << - TRIO_CFG_REGION_ADDR__REG_SHIFT) | - (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << - TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | - (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); - - dev_control.word = __gxio_mmio_read32(trio_context->mmio_base_mac + - reg_offset); - dev_control.max_read_req_sz = 5; - __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset, - dev_control.word); - - /* - * Set the max payload size supported by this Gx PCIe MAC. - * Though Gx PCIe supports Max Payload Size of up to 1024 bytes, - * experiments have shown that setting MPS to 256 yields the - * best performance. - */ - reg_offset = - (TRIO_PCIE_RC_DEVICE_CAP << - TRIO_CFG_REGION_ADDR__REG_SHIFT) | - (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << - TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | - (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); - - rc_dev_cap.word = __gxio_mmio_read32(trio_context->mmio_base_mac + - reg_offset); - rc_dev_cap.mps_sup = 1; - __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset, - rc_dev_cap.word); - - /* Configure PCI Express MPS setting. */ - list_for_each_entry(child, &root_bus->children, node) - pcie_bus_configure_settings(child); - - /* - * Set the mac_config register in trio based on the MPS/MRS of the link. - */ - reg_offset = - (TRIO_PCIE_RC_DEVICE_CONTROL << - TRIO_CFG_REGION_ADDR__REG_SHIFT) | - (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << - TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | - (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); - - dev_control.word = __gxio_mmio_read32(trio_context->mmio_base_mac + - reg_offset); - - err = gxio_trio_set_mps_mrs(trio_context, - dev_control.max_payload_size, - dev_control.max_read_req_sz, - mac); - if (err < 0) { - pr_err("PCI: PCIE_CONFIGURE_MAC_MPS_MRS failure, MAC %d on TRIO %d\n", - mac, controller->trio_index); - } -} - -static int setup_pcie_rc_delay(char *str) -{ - unsigned long delay = 0; - unsigned long trio_index; - unsigned long mac; - - if (str == NULL || !isdigit(*str)) - return -EINVAL; - trio_index = simple_strtoul(str, (char **)&str, 10); - if (trio_index >= TILEGX_NUM_TRIO) - return -EINVAL; - - if (*str != ',') - return -EINVAL; - - str++; - if (!isdigit(*str)) - return -EINVAL; - mac = simple_strtoul(str, (char **)&str, 10); - if (mac >= TILEGX_TRIO_PCIES) - return -EINVAL; - - if (*str != '\0') { - if (*str != ',') - return -EINVAL; - - str++; - if (!isdigit(*str)) - return -EINVAL; - delay = simple_strtoul(str, (char **)&str, 10); - } - - rc_delay[trio_index][mac] = delay ? : DEFAULT_RC_DELAY; - return 0; -} -early_param("pcie_rc_delay", setup_pcie_rc_delay); - -/* PCI initialization entry point, called by subsys_initcall. */ -int __init pcibios_init(void) -{ - resource_size_t offset; - LIST_HEAD(resources); - int next_busno; - struct pci_host_bridge *bridge; - int i; - - tile_pci_init(); - - if (num_rc_controllers == 0) - return 0; - - /* - * Delay a bit in case devices aren't ready. Some devices are - * known to require at least 20ms here, but we use a more - * conservative value. - */ - msleep(250); - - /* Scan all of the recorded PCI controllers. */ - for (next_busno = 0, i = 0; i < num_rc_controllers; i++) { - struct pci_controller *controller = &pci_controllers[i]; - gxio_trio_context_t *trio_context = controller->trio; - TRIO_PCIE_INTFC_PORT_STATUS_t port_status; - TRIO_PCIE_INTFC_TX_FIFO_CTL_t tx_fifo_ctl; - struct pci_bus *bus; - unsigned int reg_offset; - unsigned int class_code_revision; - int trio_index; - int mac; - int ret; - - if (trio_context->fd < 0) - continue; - - trio_index = controller->trio_index; - mac = controller->mac; - - /* - * Check for PCIe link-up status to decide if we need - * to force the link to come up. - */ - reg_offset = - (TRIO_PCIE_INTFC_PORT_STATUS << - TRIO_CFG_REGION_ADDR__REG_SHIFT) | - (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << - TRIO_CFG_REGION_ADDR__INTFC_SHIFT) | - (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); - - port_status.word = - __gxio_mmio_read(trio_context->mmio_base_mac + - reg_offset); - if (!port_status.dl_up) { - if (rc_delay[trio_index][mac]) { - pr_info("Delaying PCIe RC TRIO init %d sec on MAC %d on TRIO %d\n", - rc_delay[trio_index][mac], mac, - trio_index); - msleep(rc_delay[trio_index][mac] * 1000); - } - ret = gxio_trio_force_rc_link_up(trio_context, mac); - if (ret < 0) - pr_err("PCI: PCIE_FORCE_LINK_UP failure, MAC %d on TRIO %d\n", - mac, trio_index); - } - - pr_info("PCI: Found PCI controller #%d on TRIO %d MAC %d\n", - i, trio_index, controller->mac); - - /* Delay the bus probe if needed. */ - if (rc_delay[trio_index][mac]) { - pr_info("Delaying PCIe RC bus enumerating %d sec on MAC %d on TRIO %d\n", - rc_delay[trio_index][mac], mac, trio_index); - msleep(rc_delay[trio_index][mac] * 1000); - } else { - /* - * Wait a bit here because some EP devices - * take longer to come up. - */ - msleep(1000); - } - - /* Check for PCIe link-up status again. */ - port_status.word = - __gxio_mmio_read(trio_context->mmio_base_mac + - reg_offset); - if (!port_status.dl_up) { - if (pcie_ports[trio_index].ports[mac].removable) { - pr_info("PCI: link is down, MAC %d on TRIO %d\n", - mac, trio_index); - pr_info("This is expected if no PCIe card is connected to this link\n"); - } else - pr_err("PCI: link is down, MAC %d on TRIO %d\n", - mac, trio_index); - continue; - } - - /* - * Ensure that the link can come out of L1 power down state. - * Strictly speaking, this is needed only in the case of - * heavy RC-initiated DMAs. - */ - reg_offset = - (TRIO_PCIE_INTFC_TX_FIFO_CTL << - TRIO_CFG_REGION_ADDR__REG_SHIFT) | - (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << - TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | - (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); - tx_fifo_ctl.word = - __gxio_mmio_read(trio_context->mmio_base_mac + - reg_offset); - tx_fifo_ctl.min_p_credits = 0; - __gxio_mmio_write(trio_context->mmio_base_mac + reg_offset, - tx_fifo_ctl.word); - - /* - * Change the device ID so that Linux bus crawl doesn't confuse - * the internal bridge with any Tilera endpoints. - */ - reg_offset = - (TRIO_PCIE_RC_DEVICE_ID_VEN_ID << - TRIO_CFG_REGION_ADDR__REG_SHIFT) | - (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << - TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | - (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); - - __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset, - (TILERA_GX36_RC_DEV_ID << - TRIO_PCIE_RC_DEVICE_ID_VEN_ID__DEV_ID_SHIFT) | - TILERA_VENDOR_ID); - - /* Set the internal P2P bridge class code. */ - reg_offset = - (TRIO_PCIE_RC_REVISION_ID << - TRIO_CFG_REGION_ADDR__REG_SHIFT) | - (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << - TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | - (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); - - class_code_revision = - __gxio_mmio_read32(trio_context->mmio_base_mac + - reg_offset); - class_code_revision = (class_code_revision & 0xff) | - (PCI_CLASS_BRIDGE_PCI << 16); - - __gxio_mmio_write32(trio_context->mmio_base_mac + - reg_offset, class_code_revision); - -#ifdef USE_SHARED_PCIE_CONFIG_REGION - - /* Map in the MMIO space for the PIO region. */ - offset = HV_TRIO_PIO_OFFSET(trio_context->pio_cfg_index) | - (((unsigned long long)mac) << - TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT); - -#else - - /* Alloc a PIO region for PCI config access per MAC. */ - ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0); - if (ret < 0) { - pr_err("PCI: PCI CFG PIO alloc failure for mac %d on TRIO %d, give up\n", - mac, trio_index); - - continue; - } - - trio_context->pio_cfg_index[mac] = ret; - - /* For PIO CFG, the bus_address_hi parameter is 0. */ - ret = gxio_trio_init_pio_region_aux(trio_context, - trio_context->pio_cfg_index[mac], - mac, 0, HV_TRIO_PIO_FLAG_CONFIG_SPACE); - if (ret < 0) { - pr_err("PCI: PCI CFG PIO init failure for mac %d on TRIO %d, give up\n", - mac, trio_index); - - continue; - } - - offset = HV_TRIO_PIO_OFFSET(trio_context->pio_cfg_index[mac]) | - (((unsigned long long)mac) << - TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT); - -#endif - - /* - * To save VMALLOC space, we take advantage of the fact that - * bit 29 in the PIO CFG address format is reserved 0. With - * TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT being 30, - * this cuts VMALLOC space usage from 1GB to 512MB per mac. - */ - trio_context->mmio_base_pio_cfg[mac] = - iorpc_ioremap(trio_context->fd, offset, (1UL << - (TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT - 1))); - if (trio_context->mmio_base_pio_cfg[mac] == NULL) { - pr_err("PCI: PIO map failure for mac %d on TRIO %d\n", - mac, trio_index); - - continue; - } - - /* Initialize the PCIe interrupts. */ - if (tile_init_irqs(controller)) { - pr_err("PCI: IRQs init failure for mac %d on TRIO %d\n", - mac, trio_index); - - continue; - } - - /* - * The PCI memory resource is located above the PA space. - * The memory range for the PCI root bus should not overlap - * with the physical RAM. - */ - pci_add_resource_offset(&resources, &controller->mem_space, - controller->mem_offset); - pci_add_resource(&resources, &controller->io_space); - controller->first_busno = next_busno; - - bridge = pci_alloc_host_bridge(0); - if (!bridge) - break; - - list_splice_init(&resources, &bridge->windows); - bridge->dev.parent = NULL; - bridge->sysdata = controller; - bridge->busnr = next_busno; - bridge->ops = controller->ops; - bridge->swizzle_irq = pci_common_swizzle; - bridge->map_irq = tile_map_irq; - - pci_scan_root_bus_bridge(bridge); - bus = bridge->bus; - controller->root_bus = bus; - next_busno = bus->busn_res.end + 1; - } - - /* - * This comes from the generic Linux PCI driver. - * - * It allocates all of the resources (I/O memory, etc) - * associated with the devices read in above. - */ - pci_assign_unassigned_resources(); - - /* Record the I/O resources in the PCI controller structure. */ - for (i = 0; i < num_rc_controllers; i++) { - struct pci_controller *controller = &pci_controllers[i]; - gxio_trio_context_t *trio_context = controller->trio; - struct pci_bus *root_bus = pci_controllers[i].root_bus; - int ret; - int j; - - /* - * Skip controllers that are not properly initialized or - * have down links. - */ - if (root_bus == NULL) - continue; - - /* Configure the max_payload_size values for this domain. */ - fixup_read_and_payload_sizes(controller); - - /* Alloc a PIO region for PCI memory access for each RC port. */ - ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0); - if (ret < 0) { - pr_err("PCI: MEM PIO alloc failure on TRIO %d mac %d, give up\n", - controller->trio_index, controller->mac); - - continue; - } - - controller->pio_mem_index = ret; - - /* - * For PIO MEM, the bus_address_hi parameter is hard-coded 0 - * because we always assign 32-bit PCI bus BAR ranges. - */ - ret = gxio_trio_init_pio_region_aux(trio_context, - controller->pio_mem_index, - controller->mac, - 0, - 0); - if (ret < 0) { - pr_err("PCI: MEM PIO init failure on TRIO %d mac %d, give up\n", - controller->trio_index, controller->mac); - - continue; - } - -#ifdef CONFIG_TILE_PCI_IO - /* - * Alloc a PIO region for PCI I/O space access for each RC port. - */ - ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0); - if (ret < 0) { - pr_err("PCI: I/O PIO alloc failure on TRIO %d mac %d, give up\n", - controller->trio_index, controller->mac); - - continue; - } - - controller->pio_io_index = ret; - - /* - * For PIO IO, the bus_address_hi parameter is hard-coded 0 - * because PCI I/O address space is 32-bit. - */ - ret = gxio_trio_init_pio_region_aux(trio_context, - controller->pio_io_index, - controller->mac, - 0, - HV_TRIO_PIO_FLAG_IO_SPACE); - if (ret < 0) { - pr_err("PCI: I/O PIO init failure on TRIO %d mac %d, give up\n", - controller->trio_index, controller->mac); - - continue; - } -#endif - - /* - * Configure a Mem-Map region for each memory controller so - * that Linux can map all of its PA space to the PCI bus. - * Use the IOMMU to handle hash-for-home memory. - */ - for_each_online_node(j) { - unsigned long start_pfn = node_start_pfn[j]; - unsigned long end_pfn = node_end_pfn[j]; - unsigned long nr_pages = end_pfn - start_pfn; - - ret = gxio_trio_alloc_memory_maps(trio_context, 1, 0, - 0); - if (ret < 0) { - pr_err("PCI: Mem-Map alloc failure on TRIO %d mac %d for MC %d, give up\n", - controller->trio_index, controller->mac, - j); - - goto alloc_mem_map_failed; - } - - controller->mem_maps[j] = ret; - - /* - * Initialize the Mem-Map and the I/O MMU so that all - * the physical memory can be accessed by the endpoint - * devices. The base bus address is set to the base CPA - * of this memory controller plus an offset (see pci.h). - * The region's base VA is set to the base CPA. The - * I/O MMU table essentially translates the CPA to - * the real PA. Implicitly, for node 0, we create - * a separate Mem-Map region that serves as the inbound - * window for legacy 32-bit devices. This is a direct - * map of the low 4GB CPA space. - */ - ret = gxio_trio_init_memory_map_mmu_aux(trio_context, - controller->mem_maps[j], - start_pfn << PAGE_SHIFT, - nr_pages << PAGE_SHIFT, - trio_context->asid, - controller->mac, - (start_pfn << PAGE_SHIFT) + - TILE_PCI_MEM_MAP_BASE_OFFSET, - j, - GXIO_TRIO_ORDER_MODE_UNORDERED); - if (ret < 0) { - pr_err("PCI: Mem-Map init failure on TRIO %d mac %d for MC %d, give up\n", - controller->trio_index, controller->mac, - j); - - goto alloc_mem_map_failed; - } - continue; - -alloc_mem_map_failed: - break; - } - - pci_bus_add_devices(root_bus); - } - - return 0; -} -subsys_initcall(pcibios_init); - -/* Process any "pci=" kernel boot arguments. */ -char *__init pcibios_setup(char *str) -{ - if (!strcmp(str, "off")) { - pci_probe = 0; - return NULL; - } - return str; -} - -/* - * Called for each device after PCI setup is done. - * We initialize the PCI device capabilities conservatively, assuming that - * all devices can only address the 32-bit DMA space. The exception here is - * that the device dma_offset is set to the value that matches the 64-bit - * capable devices. This is OK because dma_offset is not used by legacy - * dma_ops, nor by the hybrid dma_ops's streaming DMAs, which are 64-bit ops. - * This implementation matches the kernel design of setting PCI devices' - * coherent_dma_mask to 0xffffffffull by default, allowing the device drivers - * to skip calling pci_set_consistent_dma_mask(DMA_BIT_MASK(32)). - */ -static void pcibios_fixup_final(struct pci_dev *pdev) -{ - set_dma_ops(&pdev->dev, gx_legacy_pci_dma_map_ops); - set_dma_offset(&pdev->dev, TILE_PCI_MEM_MAP_BASE_OFFSET); - pdev->dev.archdata.max_direct_dma_addr = - TILE_PCI_MAX_DIRECT_DMA_ADDRESS; - pdev->dev.coherent_dma_mask = TILE_PCI_MAX_DIRECT_DMA_ADDRESS; -} -DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_final); - -/* Map a PCI MMIO bus address into VA space. */ -void __iomem *ioremap(resource_size_t phys_addr, unsigned long size) -{ - struct pci_controller *controller = NULL; - resource_size_t bar_start; - resource_size_t bar_end; - resource_size_t offset; - resource_size_t start; - resource_size_t end; - int trio_fd; - int i; - - start = phys_addr; - end = phys_addr + size - 1; - - /* - * By searching phys_addr in each controller's mem_space, we can - * determine the controller that should accept the PCI memory access. - */ - for (i = 0; i < num_rc_controllers; i++) { - /* - * Skip controllers that are not properly initialized or - * have down links. - */ - if (pci_controllers[i].root_bus == NULL) - continue; - - bar_start = pci_controllers[i].mem_space.start; - bar_end = pci_controllers[i].mem_space.end; - - if ((start >= bar_start) && (end <= bar_end)) { - controller = &pci_controllers[i]; - break; - } - } - - if (controller == NULL) - return NULL; - - trio_fd = controller->trio->fd; - - /* Convert the resource start to the bus address offset. */ - start = phys_addr - controller->mem_offset; - - offset = HV_TRIO_PIO_OFFSET(controller->pio_mem_index) + start; - - /* We need to keep the PCI bus address's in-page offset in the VA. */ - return iorpc_ioremap(trio_fd, offset, size) + - (start & (PAGE_SIZE - 1)); -} -EXPORT_SYMBOL(ioremap); - -#ifdef CONFIG_TILE_PCI_IO -/* Map a PCI I/O address into VA space. */ -void __iomem *ioport_map(unsigned long port, unsigned int size) -{ - struct pci_controller *controller = NULL; - resource_size_t bar_start; - resource_size_t bar_end; - resource_size_t offset; - resource_size_t start; - resource_size_t end; - int trio_fd; - int i; - - start = port; - end = port + size - 1; - - /* - * By searching the port in each controller's io_space, we can - * determine the controller that should accept the PCI I/O access. - */ - for (i = 0; i < num_rc_controllers; i++) { - /* - * Skip controllers that are not properly initialized or - * have down links. - */ - if (pci_controllers[i].root_bus == NULL) - continue; - - bar_start = pci_controllers[i].io_space.start; - bar_end = pci_controllers[i].io_space.end; - - if ((start >= bar_start) && (end <= bar_end)) { - controller = &pci_controllers[i]; - break; - } - } - - if (controller == NULL) - return NULL; - - trio_fd = controller->trio->fd; - - /* Convert the resource start to the bus address offset. */ - port -= controller->io_space.start; - - offset = HV_TRIO_PIO_OFFSET(controller->pio_io_index) + port; - - /* We need to keep the PCI bus address's in-page offset in the VA. */ - return iorpc_ioremap(trio_fd, offset, size) + (port & (PAGE_SIZE - 1)); -} -EXPORT_SYMBOL(ioport_map); - -void ioport_unmap(void __iomem *addr) -{ - iounmap(addr); -} -EXPORT_SYMBOL(ioport_unmap); -#endif - -void pci_iounmap(struct pci_dev *dev, void __iomem *addr) -{ - iounmap(addr); -} -EXPORT_SYMBOL(pci_iounmap); - -/**************************************************************** - * - * Tile PCI config space read/write routines - * - ****************************************************************/ - -/* - * These are the normal read and write ops - * These are expanded with macros from pci_bus_read_config_byte() etc. - * - * devfn is the combined PCI device & function. - * - * offset is in bytes, from the start of config space for the - * specified bus & device. - */ -static int tile_cfg_read(struct pci_bus *bus, unsigned int devfn, int offset, - int size, u32 *val) -{ - struct pci_controller *controller = bus->sysdata; - gxio_trio_context_t *trio_context = controller->trio; - int busnum = bus->number & 0xff; - int device = PCI_SLOT(devfn); - int function = PCI_FUNC(devfn); - int config_type = 1; - TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR_t cfg_addr; - void *mmio_addr; - - /* - * Map all accesses to the local device on root bus into the - * MMIO space of the MAC. Accesses to the downstream devices - * go to the PIO space. - */ - if (pci_is_root_bus(bus)) { - if (device == 0) { - /* - * This is the internal downstream P2P bridge, - * access directly. - */ - unsigned int reg_offset; - - reg_offset = ((offset & 0xFFF) << - TRIO_CFG_REGION_ADDR__REG_SHIFT) | - (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_PROTECTED - << TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | - (controller->mac << - TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); - - mmio_addr = trio_context->mmio_base_mac + reg_offset; - - goto valid_device; - - } else { - /* - * We fake an empty device for (device > 0), - * since there is only one device on bus 0. - */ - goto invalid_device; - } - } - - /* - * Accesses to the directly attached device have to be - * sent as type-0 configs. - */ - if (busnum == (controller->first_busno + 1)) { - /* - * There is only one device off of our built-in P2P bridge. - */ - if (device != 0) - goto invalid_device; - - config_type = 0; - } - - cfg_addr.word = 0; - cfg_addr.reg_addr = (offset & 0xFFF); - cfg_addr.fn = function; - cfg_addr.dev = device; - cfg_addr.bus = busnum; - cfg_addr.type = config_type; - - /* - * Note that we don't set the mac field in cfg_addr because the - * mapping is per port. - */ - mmio_addr = trio_context->mmio_base_pio_cfg[controller->mac] + - cfg_addr.word; - -valid_device: - - switch (size) { - case 4: - *val = __gxio_mmio_read32(mmio_addr); - break; - - case 2: - *val = __gxio_mmio_read16(mmio_addr); - break; - - case 1: - *val = __gxio_mmio_read8(mmio_addr); - break; - - default: - return PCIBIOS_FUNC_NOT_SUPPORTED; - } - - TRACE_CFG_RD(size, *val, busnum, device, function, offset); - - return 0; - -invalid_device: - - switch (size) { - case 4: - *val = 0xFFFFFFFF; - break; - - case 2: - *val = 0xFFFF; - break; - - case 1: - *val = 0xFF; - break; - - default: - return PCIBIOS_FUNC_NOT_SUPPORTED; - } - - return 0; -} - - -/* - * See tile_cfg_read() for relevant comments. - * Note that "val" is the value to write, not a pointer to that value. - */ -static int tile_cfg_write(struct pci_bus *bus, unsigned int devfn, int offset, - int size, u32 val) -{ - struct pci_controller *controller = bus->sysdata; - gxio_trio_context_t *trio_context = controller->trio; - int busnum = bus->number & 0xff; - int device = PCI_SLOT(devfn); - int function = PCI_FUNC(devfn); - int config_type = 1; - TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR_t cfg_addr; - void *mmio_addr; - u32 val_32 = (u32)val; - u16 val_16 = (u16)val; - u8 val_8 = (u8)val; - - /* - * Map all accesses to the local device on root bus into the - * MMIO space of the MAC. Accesses to the downstream devices - * go to the PIO space. - */ - if (pci_is_root_bus(bus)) { - if (device == 0) { - /* - * This is the internal downstream P2P bridge, - * access directly. - */ - unsigned int reg_offset; - - reg_offset = ((offset & 0xFFF) << - TRIO_CFG_REGION_ADDR__REG_SHIFT) | - (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_PROTECTED - << TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | - (controller->mac << - TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); - - mmio_addr = trio_context->mmio_base_mac + reg_offset; - - goto valid_device; - - } else { - /* - * We fake an empty device for (device > 0), - * since there is only one device on bus 0. - */ - goto invalid_device; - } - } - - /* - * Accesses to the directly attached device have to be - * sent as type-0 configs. - */ - if (busnum == (controller->first_busno + 1)) { - /* - * There is only one device off of our built-in P2P bridge. - */ - if (device != 0) - goto invalid_device; - - config_type = 0; - } - - cfg_addr.word = 0; - cfg_addr.reg_addr = (offset & 0xFFF); - cfg_addr.fn = function; - cfg_addr.dev = device; - cfg_addr.bus = busnum; - cfg_addr.type = config_type; - - /* - * Note that we don't set the mac field in cfg_addr because the - * mapping is per port. - */ - mmio_addr = trio_context->mmio_base_pio_cfg[controller->mac] + - cfg_addr.word; - -valid_device: - - switch (size) { - case 4: - __gxio_mmio_write32(mmio_addr, val_32); - TRACE_CFG_WR(size, val_32, busnum, device, function, offset); - break; - - case 2: - __gxio_mmio_write16(mmio_addr, val_16); - TRACE_CFG_WR(size, val_16, busnum, device, function, offset); - break; - - case 1: - __gxio_mmio_write8(mmio_addr, val_8); - TRACE_CFG_WR(size, val_8, busnum, device, function, offset); - break; - - default: - return PCIBIOS_FUNC_NOT_SUPPORTED; - } - -invalid_device: - - return 0; -} - - -static struct pci_ops tile_cfg_ops = { - .read = tile_cfg_read, - .write = tile_cfg_write, -}; - - -/* MSI support starts here. */ -static unsigned int tilegx_msi_startup(struct irq_data *d) -{ - if (irq_data_get_msi_desc(d)) - pci_msi_unmask_irq(d); - - return 0; -} - -static void tilegx_msi_ack(struct irq_data *d) -{ - __insn_mtspr(SPR_IPI_EVENT_RESET_K, 1UL << d->irq); -} - -static void tilegx_msi_mask(struct irq_data *d) -{ - pci_msi_mask_irq(d); - __insn_mtspr(SPR_IPI_MASK_SET_K, 1UL << d->irq); -} - -static void tilegx_msi_unmask(struct irq_data *d) -{ - __insn_mtspr(SPR_IPI_MASK_RESET_K, 1UL << d->irq); - pci_msi_unmask_irq(d); -} - -static struct irq_chip tilegx_msi_chip = { - .name = "tilegx_msi", - .irq_startup = tilegx_msi_startup, - .irq_ack = tilegx_msi_ack, - .irq_mask = tilegx_msi_mask, - .irq_unmask = tilegx_msi_unmask, - - /* TBD: support set_affinity. */ -}; - -int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) -{ - struct pci_controller *controller; - gxio_trio_context_t *trio_context; - struct msi_msg msg; - int default_irq; - uint64_t mem_map_base; - uint64_t mem_map_limit; - u64 msi_addr; - int mem_map; - int cpu; - int irq; - int ret; - - irq = irq_alloc_hwirq(-1); - if (!irq) - return -ENOSPC; - - /* - * Since we use a 64-bit Mem-Map to accept the MSI write, we fail - * devices that are not capable of generating a 64-bit message address. - * These devices will fall back to using the legacy interrupts. - * Most PCIe endpoint devices do support 64-bit message addressing. - */ - if (desc->msi_attrib.is_64 == 0) { - dev_info(&pdev->dev, "64-bit MSI message address not supported, falling back to legacy interrupts\n"); - - ret = -ENOMEM; - goto is_64_failure; - } - - default_irq = desc->msi_attrib.default_irq; - controller = irq_get_handler_data(default_irq); - - BUG_ON(!controller); - - trio_context = controller->trio; - - /* - * Allocate a scatter-queue that will accept the MSI write and - * trigger the TILE-side interrupts. We use the scatter-queue regions - * before the mem map regions, because the latter are needed by more - * applications. - */ - mem_map = gxio_trio_alloc_scatter_queues(trio_context, 1, 0, 0); - if (mem_map >= 0) { - TRIO_MAP_SQ_DOORBELL_FMT_t doorbell_template = {{ - .pop = 0, - .doorbell = 1, - }}; - - mem_map += TRIO_NUM_MAP_MEM_REGIONS; - mem_map_base = MEM_MAP_INTR_REGIONS_BASE + - mem_map * MEM_MAP_INTR_REGION_SIZE; - mem_map_limit = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 1; - - msi_addr = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 8; - msg.data = (unsigned int)doorbell_template.word; - } else { - /* SQ regions are out, allocate from map mem regions. */ - mem_map = gxio_trio_alloc_memory_maps(trio_context, 1, 0, 0); - if (mem_map < 0) { - dev_info(&pdev->dev, "%s Mem-Map alloc failure - failed to initialize MSI interrupts - falling back to legacy interrupts\n", - desc->msi_attrib.is_msix ? "MSI-X" : "MSI"); - ret = -ENOMEM; - goto msi_mem_map_alloc_failure; - } - - mem_map_base = MEM_MAP_INTR_REGIONS_BASE + - mem_map * MEM_MAP_INTR_REGION_SIZE; - mem_map_limit = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 1; - - msi_addr = mem_map_base + TRIO_MAP_MEM_REG_INT3 - - TRIO_MAP_MEM_REG_INT0; - - msg.data = mem_map; - } - - /* We try to distribute different IRQs to different tiles. */ - cpu = tile_irq_cpu(irq); - - /* - * Now call up to the HV to configure the MSI interrupt and - * set up the IPI binding. - */ - ret = gxio_trio_config_msi_intr(trio_context, cpu_x(cpu), cpu_y(cpu), - KERNEL_PL, irq, controller->mac, - mem_map, mem_map_base, mem_map_limit, - trio_context->asid); - if (ret < 0) { - dev_info(&pdev->dev, "HV MSI config failed\n"); - - goto hv_msi_config_failure; - } - - irq_set_msi_desc(irq, desc); - - msg.address_hi = msi_addr >> 32; - msg.address_lo = msi_addr & 0xffffffff; - - pci_write_msi_msg(irq, &msg); - irq_set_chip_and_handler(irq, &tilegx_msi_chip, handle_level_irq); - irq_set_handler_data(irq, controller); - - return 0; - -hv_msi_config_failure: - /* Free mem-map */ -msi_mem_map_alloc_failure: -is_64_failure: - irq_free_hwirq(irq); - return ret; -} - -void arch_teardown_msi_irq(unsigned int irq) -{ - irq_free_hwirq(irq); -} diff --git a/arch/tile/kernel/perf_event.c b/arch/tile/kernel/perf_event.c deleted file mode 100644 index 6394c1ccb68e..000000000000 --- a/arch/tile/kernel/perf_event.c +++ /dev/null @@ -1,1005 +0,0 @@ -/* - * Copyright 2014 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * - * Perf_events support for Tile processor. - * - * This code is based upon the x86 perf event - * code, which is: - * - * Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de> - * Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar - * Copyright (C) 2009 Jaswinder Singh Rajput - * Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter - * Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra - * Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com> - * Copyright (C) 2009 Google, Inc., Stephane Eranian - */ - -#include <linux/kprobes.h> -#include <linux/kernel.h> -#include <linux/kdebug.h> -#include <linux/mutex.h> -#include <linux/bitmap.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/perf_event.h> -#include <linux/atomic.h> -#include <asm/traps.h> -#include <asm/stack.h> -#include <asm/pmc.h> -#include <hv/hypervisor.h> - -#define TILE_MAX_COUNTERS 4 - -#define PERF_COUNT_0_IDX 0 -#define PERF_COUNT_1_IDX 1 -#define AUX_PERF_COUNT_0_IDX 2 -#define AUX_PERF_COUNT_1_IDX 3 - -struct cpu_hw_events { - int n_events; - struct perf_event *events[TILE_MAX_COUNTERS]; /* counter order */ - struct perf_event *event_list[TILE_MAX_COUNTERS]; /* enabled - order */ - int assign[TILE_MAX_COUNTERS]; - unsigned long active_mask[BITS_TO_LONGS(TILE_MAX_COUNTERS)]; - unsigned long used_mask; -}; - -/* TILE arch specific performance monitor unit */ -struct tile_pmu { - const char *name; - int version; - const int *hw_events; /* generic hw events table */ - /* generic hw cache events table */ - const int (*cache_events)[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX]; - int (*map_hw_event)(u64); /*method used to map - hw events */ - int (*map_cache_event)(u64); /*method used to map - cache events */ - - u64 max_period; /* max sampling period */ - u64 cntval_mask; /* counter width mask */ - int cntval_bits; /* counter width */ - int max_events; /* max generic hw events - in map */ - int num_counters; /* number base + aux counters */ - int num_base_counters; /* number base counters */ -}; - -DEFINE_PER_CPU(u64, perf_irqs); -static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events); - -#define TILE_OP_UNSUPP (-1) - -#ifndef __tilegx__ -/* TILEPro hardware events map */ -static const int tile_hw_event_map[] = { - [PERF_COUNT_HW_CPU_CYCLES] = 0x01, /* ONE */ - [PERF_COUNT_HW_INSTRUCTIONS] = 0x06, /* MP_BUNDLE_RETIRED */ - [PERF_COUNT_HW_CACHE_REFERENCES] = TILE_OP_UNSUPP, - [PERF_COUNT_HW_CACHE_MISSES] = TILE_OP_UNSUPP, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x16, /* - MP_CONDITIONAL_BRANCH_ISSUED */ - [PERF_COUNT_HW_BRANCH_MISSES] = 0x14, /* - MP_CONDITIONAL_BRANCH_MISSPREDICT */ - [PERF_COUNT_HW_BUS_CYCLES] = TILE_OP_UNSUPP, -}; -#else -/* TILEGx hardware events map */ -static const int tile_hw_event_map[] = { - [PERF_COUNT_HW_CPU_CYCLES] = 0x181, /* ONE */ - [PERF_COUNT_HW_INSTRUCTIONS] = 0xdb, /* INSTRUCTION_BUNDLE */ - [PERF_COUNT_HW_CACHE_REFERENCES] = TILE_OP_UNSUPP, - [PERF_COUNT_HW_CACHE_MISSES] = TILE_OP_UNSUPP, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0xd9, /* - COND_BRANCH_PRED_CORRECT */ - [PERF_COUNT_HW_BRANCH_MISSES] = 0xda, /* - COND_BRANCH_PRED_INCORRECT */ - [PERF_COUNT_HW_BUS_CYCLES] = TILE_OP_UNSUPP, -}; -#endif - -#define C(x) PERF_COUNT_HW_CACHE_##x - -/* - * Generalized hw caching related hw_event table, filled - * in on a per model basis. A value of -1 means - * 'not supported', any other value means the - * raw hw_event ID. - */ -#ifndef __tilegx__ -/* TILEPro hardware cache event map */ -static const int tile_cache_event_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { -[C(L1D)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = 0x21, /* RD_MISS */ - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = 0x22, /* WR_MISS */ - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, -}, -[C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = 0x12, /* MP_ICACHE_HIT_ISSUED */ - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, -}, -[C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, -}, -[C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = 0x1d, /* TLB_CNT */ - [C(RESULT_MISS)] = 0x20, /* TLB_EXCEPTION */ - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, -}, -[C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = 0x13, /* MP_ITLB_HIT_ISSUED */ - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, -}, -[C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, -}, -}; -#else -/* TILEGx hardware events map */ -static const int tile_cache_event_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { -[C(L1D)] = { - /* - * Like some other architectures (e.g. ARM), the performance - * counters don't differentiate between read and write - * accesses/misses, so this isn't strictly correct, but it's the - * best we can do. Writes and reads get combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = 0x44, /* RD_MISS */ - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = 0x45, /* WR_MISS */ - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, -}, -[C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, -}, -[C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, -}, -[C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = 0x40, /* TLB_CNT */ - [C(RESULT_MISS)] = 0x43, /* TLB_EXCEPTION */ - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = 0x40, /* TLB_CNT */ - [C(RESULT_MISS)] = 0x43, /* TLB_EXCEPTION */ - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, -}, -[C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = 0xd4, /* ITLB_MISS_INT */ - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = 0xd4, /* ITLB_MISS_INT */ - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, -}, -[C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = TILE_OP_UNSUPP, - [C(RESULT_MISS)] = TILE_OP_UNSUPP, - }, -}, -}; -#endif - -static atomic_t tile_active_events; -static DEFINE_MUTEX(perf_intr_reserve_mutex); - -static int tile_map_hw_event(u64 config); -static int tile_map_cache_event(u64 config); - -static int tile_pmu_handle_irq(struct pt_regs *regs, int fault); - -/* - * To avoid new_raw_count getting larger then pre_raw_count - * in tile_perf_event_update(), we limit the value of max_period to 2^31 - 1. - */ -static const struct tile_pmu tilepmu = { -#ifndef __tilegx__ - .name = "tilepro", -#else - .name = "tilegx", -#endif - .max_events = ARRAY_SIZE(tile_hw_event_map), - .map_hw_event = tile_map_hw_event, - .hw_events = tile_hw_event_map, - .map_cache_event = tile_map_cache_event, - .cache_events = &tile_cache_event_map, - .cntval_bits = 32, - .cntval_mask = (1ULL << 32) - 1, - .max_period = (1ULL << 31) - 1, - .num_counters = TILE_MAX_COUNTERS, - .num_base_counters = TILE_BASE_COUNTERS, -}; - -static const struct tile_pmu *tile_pmu __read_mostly; - -/* - * Check whether perf event is enabled. - */ -int tile_perf_enabled(void) -{ - return atomic_read(&tile_active_events) != 0; -} - -/* - * Read Performance Counters. - */ -static inline u64 read_counter(int idx) -{ - u64 val = 0; - - /* __insn_mfspr() only takes an immediate argument */ - switch (idx) { - case PERF_COUNT_0_IDX: - val = __insn_mfspr(SPR_PERF_COUNT_0); - break; - case PERF_COUNT_1_IDX: - val = __insn_mfspr(SPR_PERF_COUNT_1); - break; - case AUX_PERF_COUNT_0_IDX: - val = __insn_mfspr(SPR_AUX_PERF_COUNT_0); - break; - case AUX_PERF_COUNT_1_IDX: - val = __insn_mfspr(SPR_AUX_PERF_COUNT_1); - break; - default: - WARN_ON_ONCE(idx > AUX_PERF_COUNT_1_IDX || - idx < PERF_COUNT_0_IDX); - } - - return val; -} - -/* - * Write Performance Counters. - */ -static inline void write_counter(int idx, u64 value) -{ - /* __insn_mtspr() only takes an immediate argument */ - switch (idx) { - case PERF_COUNT_0_IDX: - __insn_mtspr(SPR_PERF_COUNT_0, value); - break; - case PERF_COUNT_1_IDX: - __insn_mtspr(SPR_PERF_COUNT_1, value); - break; - case AUX_PERF_COUNT_0_IDX: - __insn_mtspr(SPR_AUX_PERF_COUNT_0, value); - break; - case AUX_PERF_COUNT_1_IDX: - __insn_mtspr(SPR_AUX_PERF_COUNT_1, value); - break; - default: - WARN_ON_ONCE(idx > AUX_PERF_COUNT_1_IDX || - idx < PERF_COUNT_0_IDX); - } -} - -/* - * Enable performance event by setting - * Performance Counter Control registers. - */ -static inline void tile_pmu_enable_event(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - unsigned long cfg, mask; - int shift, idx = hwc->idx; - - /* - * prevent early activation from tile_pmu_start() in hw_perf_enable - */ - - if (WARN_ON_ONCE(idx == -1)) - return; - - if (idx < tile_pmu->num_base_counters) - cfg = __insn_mfspr(SPR_PERF_COUNT_CTL); - else - cfg = __insn_mfspr(SPR_AUX_PERF_COUNT_CTL); - - switch (idx) { - case PERF_COUNT_0_IDX: - case AUX_PERF_COUNT_0_IDX: - mask = TILE_EVENT_MASK; - shift = 0; - break; - case PERF_COUNT_1_IDX: - case AUX_PERF_COUNT_1_IDX: - mask = TILE_EVENT_MASK << 16; - shift = 16; - break; - default: - WARN_ON_ONCE(idx < PERF_COUNT_0_IDX || - idx > AUX_PERF_COUNT_1_IDX); - return; - } - - /* Clear mask bits to enable the event. */ - cfg &= ~mask; - cfg |= hwc->config << shift; - - if (idx < tile_pmu->num_base_counters) - __insn_mtspr(SPR_PERF_COUNT_CTL, cfg); - else - __insn_mtspr(SPR_AUX_PERF_COUNT_CTL, cfg); -} - -/* - * Disable performance event by clearing - * Performance Counter Control registers. - */ -static inline void tile_pmu_disable_event(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - unsigned long cfg, mask; - int idx = hwc->idx; - - if (idx == -1) - return; - - if (idx < tile_pmu->num_base_counters) - cfg = __insn_mfspr(SPR_PERF_COUNT_CTL); - else - cfg = __insn_mfspr(SPR_AUX_PERF_COUNT_CTL); - - switch (idx) { - case PERF_COUNT_0_IDX: - case AUX_PERF_COUNT_0_IDX: - mask = TILE_PLM_MASK; - break; - case PERF_COUNT_1_IDX: - case AUX_PERF_COUNT_1_IDX: - mask = TILE_PLM_MASK << 16; - break; - default: - WARN_ON_ONCE(idx < PERF_COUNT_0_IDX || - idx > AUX_PERF_COUNT_1_IDX); - return; - } - - /* Set mask bits to disable the event. */ - cfg |= mask; - - if (idx < tile_pmu->num_base_counters) - __insn_mtspr(SPR_PERF_COUNT_CTL, cfg); - else - __insn_mtspr(SPR_AUX_PERF_COUNT_CTL, cfg); -} - -/* - * Propagate event elapsed time into the generic event. - * Can only be executed on the CPU where the event is active. - * Returns the delta events processed. - */ -static u64 tile_perf_event_update(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - int shift = 64 - tile_pmu->cntval_bits; - u64 prev_raw_count, new_raw_count; - u64 oldval; - int idx = hwc->idx; - u64 delta; - - /* - * Careful: an NMI might modify the previous event value. - * - * Our tactic to handle this is to first atomically read and - * exchange a new raw count - then add that new-prev delta - * count to the generic event atomically: - */ -again: - prev_raw_count = local64_read(&hwc->prev_count); - new_raw_count = read_counter(idx); - - oldval = local64_cmpxchg(&hwc->prev_count, prev_raw_count, - new_raw_count); - if (oldval != prev_raw_count) - goto again; - - /* - * Now we have the new raw value and have updated the prev - * timestamp already. We can now calculate the elapsed delta - * (event-)time and add that to the generic event. - * - * Careful, not all hw sign-extends above the physical width - * of the count. - */ - delta = (new_raw_count << shift) - (prev_raw_count << shift); - delta >>= shift; - - local64_add(delta, &event->count); - local64_sub(delta, &hwc->period_left); - - return new_raw_count; -} - -/* - * Set the next IRQ period, based on the hwc->period_left value. - * To be called with the event disabled in hw: - */ -static int tile_event_set_period(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - s64 left = local64_read(&hwc->period_left); - s64 period = hwc->sample_period; - int ret = 0; - - /* - * If we are way outside a reasonable range then just skip forward: - */ - if (unlikely(left <= -period)) { - left = period; - local64_set(&hwc->period_left, left); - hwc->last_period = period; - ret = 1; - } - - if (unlikely(left <= 0)) { - left += period; - local64_set(&hwc->period_left, left); - hwc->last_period = period; - ret = 1; - } - if (left > tile_pmu->max_period) - left = tile_pmu->max_period; - - /* - * The hw event starts counting from this event offset, - * mark it to be able to extra future deltas: - */ - local64_set(&hwc->prev_count, (u64)-left); - - write_counter(idx, (u64)(-left) & tile_pmu->cntval_mask); - - perf_event_update_userpage(event); - - return ret; -} - -/* - * Stop the event but do not release the PMU counter - */ -static void tile_pmu_stop(struct perf_event *event, int flags) -{ - struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - - if (__test_and_clear_bit(idx, cpuc->active_mask)) { - tile_pmu_disable_event(event); - cpuc->events[hwc->idx] = NULL; - WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED); - hwc->state |= PERF_HES_STOPPED; - } - - if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) { - /* - * Drain the remaining delta count out of a event - * that we are disabling: - */ - tile_perf_event_update(event); - hwc->state |= PERF_HES_UPTODATE; - } -} - -/* - * Start an event (without re-assigning counter) - */ -static void tile_pmu_start(struct perf_event *event, int flags) -{ - struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); - int idx = event->hw.idx; - - if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED))) - return; - - if (WARN_ON_ONCE(idx == -1)) - return; - - if (flags & PERF_EF_RELOAD) { - WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE)); - tile_event_set_period(event); - } - - event->hw.state = 0; - - cpuc->events[idx] = event; - __set_bit(idx, cpuc->active_mask); - - unmask_pmc_interrupts(); - - tile_pmu_enable_event(event); - - perf_event_update_userpage(event); -} - -/* - * Add a single event to the PMU. - * - * The event is added to the group of enabled events - * but only if it can be scehduled with existing events. - */ -static int tile_pmu_add(struct perf_event *event, int flags) -{ - struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); - struct hw_perf_event *hwc; - unsigned long mask; - int b, max_cnt; - - hwc = &event->hw; - - /* - * We are full. - */ - if (cpuc->n_events == tile_pmu->num_counters) - return -ENOSPC; - - cpuc->event_list[cpuc->n_events] = event; - cpuc->n_events++; - - hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED; - if (!(flags & PERF_EF_START)) - hwc->state |= PERF_HES_ARCH; - - /* - * Find first empty counter. - */ - max_cnt = tile_pmu->num_counters; - mask = ~cpuc->used_mask; - - /* Find next free counter. */ - b = find_next_bit(&mask, max_cnt, 0); - - /* Should not happen. */ - if (WARN_ON_ONCE(b == max_cnt)) - return -ENOSPC; - - /* - * Assign counter to event. - */ - event->hw.idx = b; - __set_bit(b, &cpuc->used_mask); - - /* - * Start if requested. - */ - if (flags & PERF_EF_START) - tile_pmu_start(event, PERF_EF_RELOAD); - - return 0; -} - -/* - * Delete a single event from the PMU. - * - * The event is deleted from the group of enabled events. - * If it is the last event, disable PMU interrupt. - */ -static void tile_pmu_del(struct perf_event *event, int flags) -{ - struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); - int i; - - /* - * Remove event from list, compact list if necessary. - */ - for (i = 0; i < cpuc->n_events; i++) { - if (cpuc->event_list[i] == event) { - while (++i < cpuc->n_events) - cpuc->event_list[i-1] = cpuc->event_list[i]; - --cpuc->n_events; - cpuc->events[event->hw.idx] = NULL; - __clear_bit(event->hw.idx, &cpuc->used_mask); - tile_pmu_stop(event, PERF_EF_UPDATE); - break; - } - } - /* - * If there are no events left, then mask PMU interrupt. - */ - if (cpuc->n_events == 0) - mask_pmc_interrupts(); - perf_event_update_userpage(event); -} - -/* - * Propagate event elapsed time into the event. - */ -static inline void tile_pmu_read(struct perf_event *event) -{ - tile_perf_event_update(event); -} - -/* - * Map generic events to Tile PMU. - */ -static int tile_map_hw_event(u64 config) -{ - if (config >= tile_pmu->max_events) - return -EINVAL; - return tile_pmu->hw_events[config]; -} - -/* - * Map generic hardware cache events to Tile PMU. - */ -static int tile_map_cache_event(u64 config) -{ - unsigned int cache_type, cache_op, cache_result; - int code; - - if (!tile_pmu->cache_events) - return -ENOENT; - - cache_type = (config >> 0) & 0xff; - if (cache_type >= PERF_COUNT_HW_CACHE_MAX) - return -EINVAL; - - cache_op = (config >> 8) & 0xff; - if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX) - return -EINVAL; - - cache_result = (config >> 16) & 0xff; - if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) - return -EINVAL; - - code = (*tile_pmu->cache_events)[cache_type][cache_op][cache_result]; - if (code == TILE_OP_UNSUPP) - return -EINVAL; - - return code; -} - -static void tile_event_destroy(struct perf_event *event) -{ - if (atomic_dec_return(&tile_active_events) == 0) - release_pmc_hardware(); -} - -static int __tile_event_init(struct perf_event *event) -{ - struct perf_event_attr *attr = &event->attr; - struct hw_perf_event *hwc = &event->hw; - int code; - - switch (attr->type) { - case PERF_TYPE_HARDWARE: - code = tile_pmu->map_hw_event(attr->config); - break; - case PERF_TYPE_HW_CACHE: - code = tile_pmu->map_cache_event(attr->config); - break; - case PERF_TYPE_RAW: - code = attr->config & TILE_EVENT_MASK; - break; - default: - /* Should not happen. */ - return -EOPNOTSUPP; - } - - if (code < 0) - return code; - - hwc->config = code; - hwc->idx = -1; - - if (attr->exclude_user) - hwc->config |= TILE_CTL_EXCL_USER; - - if (attr->exclude_kernel) - hwc->config |= TILE_CTL_EXCL_KERNEL; - - if (attr->exclude_hv) - hwc->config |= TILE_CTL_EXCL_HV; - - if (!hwc->sample_period) { - hwc->sample_period = tile_pmu->max_period; - hwc->last_period = hwc->sample_period; - local64_set(&hwc->period_left, hwc->sample_period); - } - event->destroy = tile_event_destroy; - return 0; -} - -static int tile_event_init(struct perf_event *event) -{ - int err = 0; - perf_irq_t old_irq_handler = NULL; - - if (atomic_inc_return(&tile_active_events) == 1) - old_irq_handler = reserve_pmc_hardware(tile_pmu_handle_irq); - - if (old_irq_handler) { - pr_warn("PMC hardware busy (reserved by oprofile)\n"); - - atomic_dec(&tile_active_events); - return -EBUSY; - } - - switch (event->attr.type) { - case PERF_TYPE_RAW: - case PERF_TYPE_HARDWARE: - case PERF_TYPE_HW_CACHE: - break; - - default: - return -ENOENT; - } - - err = __tile_event_init(event); - if (err) { - if (event->destroy) - event->destroy(event); - } - return err; -} - -static struct pmu tilera_pmu = { - .event_init = tile_event_init, - .add = tile_pmu_add, - .del = tile_pmu_del, - - .start = tile_pmu_start, - .stop = tile_pmu_stop, - - .read = tile_pmu_read, -}; - -/* - * PMU's IRQ handler, PMU has 2 interrupts, they share the same handler. - */ -int tile_pmu_handle_irq(struct pt_regs *regs, int fault) -{ - struct perf_sample_data data; - struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); - struct perf_event *event; - struct hw_perf_event *hwc; - u64 val; - unsigned long status; - int bit; - - __this_cpu_inc(perf_irqs); - - if (!atomic_read(&tile_active_events)) - return 0; - - status = pmc_get_overflow(); - pmc_ack_overflow(status); - - for_each_set_bit(bit, &status, tile_pmu->num_counters) { - - event = cpuc->events[bit]; - - if (!event) - continue; - - if (!test_bit(bit, cpuc->active_mask)) - continue; - - hwc = &event->hw; - - val = tile_perf_event_update(event); - if (val & (1ULL << (tile_pmu->cntval_bits - 1))) - continue; - - perf_sample_data_init(&data, 0, event->hw.last_period); - if (!tile_event_set_period(event)) - continue; - - if (perf_event_overflow(event, &data, regs)) - tile_pmu_stop(event, 0); - } - - return 0; -} - -static bool __init supported_pmu(void) -{ - tile_pmu = &tilepmu; - return true; -} - -int __init init_hw_perf_events(void) -{ - supported_pmu(); - perf_pmu_register(&tilera_pmu, "cpu", PERF_TYPE_RAW); - return 0; -} -arch_initcall(init_hw_perf_events); - -/* Callchain handling code. */ - -/* - * Tile specific backtracing code for perf_events. - */ -static inline void perf_callchain(struct perf_callchain_entry_ctx *entry, - struct pt_regs *regs) -{ - struct KBacktraceIterator kbt; - unsigned int i; - - /* - * Get the address just after the "jalr" instruction that - * jumps to the handler for a syscall. When we find this - * address in a backtrace, we silently ignore it, which gives - * us a one-step backtrace connection from the sys_xxx() - * function in the kernel to the xxx() function in libc. - * Otherwise, we lose the ability to properly attribute time - * from the libc calls to the kernel implementations, since - * oprofile only considers PCs from backtraces a pair at a time. - */ - unsigned long handle_syscall_pc = handle_syscall_link_address(); - - KBacktraceIterator_init(&kbt, NULL, regs); - kbt.profile = 1; - - /* - * The sample for the pc is already recorded. Now we are adding the - * address of the callsites on the stack. Our iterator starts - * with the frame of the (already sampled) call site. If our - * iterator contained a "return address" field, we could have just - * used it and wouldn't have needed to skip the first - * frame. That's in effect what the arm and x86 versions do. - * Instead we peel off the first iteration to get the equivalent - * behavior. - */ - - if (KBacktraceIterator_end(&kbt)) - return; - KBacktraceIterator_next(&kbt); - - /* - * Set stack depth to 16 for user and kernel space respectively, that - * is, total 32 stack frames. - */ - for (i = 0; i < 16; ++i) { - unsigned long pc; - if (KBacktraceIterator_end(&kbt)) - break; - pc = kbt.it.pc; - if (pc != handle_syscall_pc) - perf_callchain_store(entry, pc); - KBacktraceIterator_next(&kbt); - } -} - -void perf_callchain_user(struct perf_callchain_entry_ctx *entry, - struct pt_regs *regs) -{ - perf_callchain(entry, regs); -} - -void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, - struct pt_regs *regs) -{ - perf_callchain(entry, regs); -} diff --git a/arch/tile/kernel/pmc.c b/arch/tile/kernel/pmc.c deleted file mode 100644 index 81cf8743a3f3..000000000000 --- a/arch/tile/kernel/pmc.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * Copyright 2014 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/errno.h> -#include <linux/spinlock.h> -#include <linux/module.h> -#include <linux/atomic.h> - -#include <asm/processor.h> -#include <asm/pmc.h> - -perf_irq_t perf_irq = NULL; -int handle_perf_interrupt(struct pt_regs *regs, int fault) -{ - int retval; - - if (!perf_irq) - panic("Unexpected PERF_COUNT interrupt %d\n", fault); - - retval = perf_irq(regs, fault); - return retval; -} - -/* Reserve PMC hardware if it is available. */ -perf_irq_t reserve_pmc_hardware(perf_irq_t new_perf_irq) -{ - return cmpxchg(&perf_irq, NULL, new_perf_irq); -} -EXPORT_SYMBOL(reserve_pmc_hardware); - -/* Release PMC hardware. */ -void release_pmc_hardware(void) -{ - perf_irq = NULL; -} -EXPORT_SYMBOL(release_pmc_hardware); - - -/* - * Get current overflow status of each performance counter, - * and auxiliary performance counter. - */ -unsigned long -pmc_get_overflow(void) -{ - unsigned long status; - - /* - * merge base+aux into a single vector - */ - status = __insn_mfspr(SPR_PERF_COUNT_STS); - status |= __insn_mfspr(SPR_AUX_PERF_COUNT_STS) << TILE_BASE_COUNTERS; - return status; -} - -/* - * Clear the status bit for the corresponding counter, if written - * with a one. - */ -void -pmc_ack_overflow(unsigned long status) -{ - /* - * clear overflow status by writing ones - */ - __insn_mtspr(SPR_PERF_COUNT_STS, status); - __insn_mtspr(SPR_AUX_PERF_COUNT_STS, status >> TILE_BASE_COUNTERS); -} - -/* - * The perf count interrupts are masked and unmasked explicitly, - * and only here. The normal irq_enable() does not enable them, - * and irq_disable() does not disable them. That lets these - * routines drive the perf count interrupts orthogonally. - * - * We also mask the perf count interrupts on entry to the perf count - * interrupt handler in assembly code, and by default unmask them - * again (with interrupt critical section protection) just before - * returning from the interrupt. If the perf count handler returns - * a non-zero error code, then we don't re-enable them before returning. - * - * For Pro, we rely on both interrupts being in the same word to update - * them atomically so we never have one enabled and one disabled. - */ - -#if CHIP_HAS_SPLIT_INTR_MASK() -# if INT_PERF_COUNT < 32 || INT_AUX_PERF_COUNT < 32 -# error Fix assumptions about which word PERF_COUNT interrupts are in -# endif -#endif - -static inline unsigned long long pmc_mask(void) -{ - unsigned long long mask = 1ULL << INT_PERF_COUNT; - mask |= 1ULL << INT_AUX_PERF_COUNT; - return mask; -} - -void unmask_pmc_interrupts(void) -{ - interrupt_mask_reset_mask(pmc_mask()); -} - -void mask_pmc_interrupts(void) -{ - interrupt_mask_set_mask(pmc_mask()); -} diff --git a/arch/tile/kernel/proc.c b/arch/tile/kernel/proc.c deleted file mode 100644 index 7983e9868df6..000000000000 --- a/arch/tile/kernel/proc.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/smp.h> -#include <linux/seq_file.h> -#include <linux/threads.h> -#include <linux/cpumask.h> -#include <linux/timex.h> -#include <linux/delay.h> -#include <linux/fs.h> -#include <linux/proc_fs.h> -#include <linux/sysctl.h> -#include <linux/hardirq.h> -#include <linux/hugetlb.h> -#include <linux/mman.h> -#include <asm/unaligned.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/sections.h> -#include <asm/homecache.h> -#include <asm/hardwall.h> -#include <arch/chip.h> - - -/* - * Support /proc/cpuinfo - */ - -#define cpu_to_ptr(n) ((void *)((long)(n)+1)) -#define ptr_to_cpu(p) ((long)(p) - 1) - -static int show_cpuinfo(struct seq_file *m, void *v) -{ - int n = ptr_to_cpu(v); - - if (n == 0) { - seq_printf(m, "cpu count\t: %d\n", num_online_cpus()); - seq_printf(m, "cpu list\t: %*pbl\n", - cpumask_pr_args(cpu_online_mask)); - seq_printf(m, "model name\t: %s\n", chip_model); - seq_printf(m, "flags\t\t:\n"); /* nothing for now */ - seq_printf(m, "cpu MHz\t\t: %llu.%06llu\n", - get_clock_rate() / 1000000, - (get_clock_rate() % 1000000)); - seq_printf(m, "bogomips\t: %lu.%02lu\n\n", - loops_per_jiffy/(500000/HZ), - (loops_per_jiffy/(5000/HZ)) % 100); - } - -#ifdef CONFIG_SMP - if (!cpu_online(n)) - return 0; -#endif - - seq_printf(m, "processor\t: %d\n", n); - - /* Print only num_online_cpus() blank lines total. */ - if (cpumask_next(n, cpu_online_mask) < nr_cpu_ids) - seq_printf(m, "\n"); - - return 0; -} - -static void *c_start(struct seq_file *m, loff_t *pos) -{ - return *pos < nr_cpu_ids ? cpu_to_ptr(*pos) : NULL; -} -static void *c_next(struct seq_file *m, void *v, loff_t *pos) -{ - ++*pos; - return c_start(m, pos); -} -static void c_stop(struct seq_file *m, void *v) -{ -} -const struct seq_operations cpuinfo_op = { - .start = c_start, - .next = c_next, - .stop = c_stop, - .show = show_cpuinfo, -}; - -/* - * Support /proc/tile directory - */ - -static int __init proc_tile_init(void) -{ - struct proc_dir_entry *root = proc_mkdir("tile", NULL); - if (root == NULL) - return 0; - - proc_tile_hardwall_init(root); - - return 0; -} - -arch_initcall(proc_tile_init); - -/* - * Support /proc/sys/tile directory - */ - -static struct ctl_table unaligned_subtable[] = { - { - .procname = "enabled", - .data = &unaligned_fixup, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_dointvec - }, - { - .procname = "printk", - .data = &unaligned_printk, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_dointvec - }, - { - .procname = "count", - .data = &unaligned_fixup_count, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_dointvec - }, - {} -}; - -static struct ctl_table unaligned_table[] = { - { - .procname = "unaligned_fixup", - .mode = 0555, - .child = unaligned_subtable - }, - {} -}; - -static struct ctl_path tile_path[] = { - { .procname = "tile" }, - { } -}; - -static int __init proc_sys_tile_init(void) -{ - register_sysctl_paths(tile_path, unaligned_table); - return 0; -} - -arch_initcall(proc_sys_tile_init); diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c deleted file mode 100644 index f0a0e18e4dfb..000000000000 --- a/arch/tile/kernel/process.c +++ /dev/null @@ -1,659 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/sched.h> -#include <linux/sched/debug.h> -#include <linux/sched/task.h> -#include <linux/sched/task_stack.h> -#include <linux/preempt.h> -#include <linux/module.h> -#include <linux/fs.h> -#include <linux/kprobes.h> -#include <linux/elfcore.h> -#include <linux/tick.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/compat.h> -#include <linux/nmi.h> -#include <linux/syscalls.h> -#include <linux/kernel.h> -#include <linux/tracehook.h> -#include <linux/signal.h> -#include <linux/delay.h> -#include <linux/context_tracking.h> -#include <asm/stack.h> -#include <asm/switch_to.h> -#include <asm/homecache.h> -#include <asm/syscalls.h> -#include <asm/traps.h> -#include <asm/setup.h> -#include <linux/uaccess.h> -#ifdef CONFIG_HARDWALL -#include <asm/hardwall.h> -#endif -#include <arch/chip.h> -#include <arch/abi.h> -#include <arch/sim_def.h> - -/* - * Use the (x86) "idle=poll" option to prefer low latency when leaving the - * idle loop over low power while in the idle loop, e.g. if we have - * one thread per core and we want to get threads out of futex waits fast. - */ -static int __init idle_setup(char *str) -{ - if (!str) - return -EINVAL; - - if (!strcmp(str, "poll")) { - pr_info("using polling idle threads\n"); - cpu_idle_poll_ctrl(true); - return 0; - } else if (!strcmp(str, "halt")) { - return 0; - } - return -1; -} -early_param("idle", idle_setup); - -void arch_cpu_idle(void) -{ - __this_cpu_write(irq_stat.idle_timestamp, jiffies); - _cpu_idle(); -} - -/* - * Release a thread_info structure - */ -void arch_release_thread_stack(unsigned long *stack) -{ - struct thread_info *info = (void *)stack; - struct single_step_state *step_state = info->step_state; - - if (step_state) { - - /* - * FIXME: we don't munmap step_state->buffer - * because the mm_struct for this process (info->task->mm) - * has already been zeroed in exit_mm(). Keeping a - * reference to it here seems like a bad move, so this - * means we can't munmap() the buffer, and therefore if we - * ptrace multiple threads in a process, we will slowly - * leak user memory. (Note that as soon as the last - * thread in a process dies, we will reclaim all user - * memory including single-step buffers in the usual way.) - * We should either assign a kernel VA to this buffer - * somehow, or we should associate the buffer(s) with the - * mm itself so we can clean them up that way. - */ - kfree(step_state); - } -} - -static void save_arch_state(struct thread_struct *t); - -int copy_thread(unsigned long clone_flags, unsigned long sp, - unsigned long arg, struct task_struct *p) -{ - struct pt_regs *childregs = task_pt_regs(p); - unsigned long ksp; - unsigned long *callee_regs; - - /* - * Set up the stack and stack pointer appropriately for the - * new child to find itself woken up in __switch_to(). - * The callee-saved registers must be on the stack to be read; - * the new task will then jump to assembly support to handle - * calling schedule_tail(), etc., and (for userspace tasks) - * returning to the context set up in the pt_regs. - */ - ksp = (unsigned long) childregs; - ksp -= C_ABI_SAVE_AREA_SIZE; /* interrupt-entry save area */ - ((long *)ksp)[0] = ((long *)ksp)[1] = 0; - ksp -= CALLEE_SAVED_REGS_COUNT * sizeof(unsigned long); - callee_regs = (unsigned long *)ksp; - ksp -= C_ABI_SAVE_AREA_SIZE; /* __switch_to() save area */ - ((long *)ksp)[0] = ((long *)ksp)[1] = 0; - p->thread.ksp = ksp; - - /* Record the pid of the task that created this one. */ - p->thread.creator_pid = current->pid; - - if (unlikely(p->flags & PF_KTHREAD)) { - /* kernel thread */ - memset(childregs, 0, sizeof(struct pt_regs)); - memset(&callee_regs[2], 0, - (CALLEE_SAVED_REGS_COUNT - 2) * sizeof(unsigned long)); - callee_regs[0] = sp; /* r30 = function */ - callee_regs[1] = arg; /* r31 = arg */ - p->thread.pc = (unsigned long) ret_from_kernel_thread; - return 0; - } - - /* - * Start new thread in ret_from_fork so it schedules properly - * and then return from interrupt like the parent. - */ - p->thread.pc = (unsigned long) ret_from_fork; - - /* - * Do not clone step state from the parent; each thread - * must make its own lazily. - */ - task_thread_info(p)->step_state = NULL; - -#ifdef __tilegx__ - /* - * Do not clone unalign jit fixup from the parent; each thread - * must allocate its own on demand. - */ - task_thread_info(p)->unalign_jit_base = NULL; -#endif - - /* - * Copy the registers onto the kernel stack so the - * return-from-interrupt code will reload it into registers. - */ - *childregs = *current_pt_regs(); - childregs->regs[0] = 0; /* return value is zero */ - if (sp) - childregs->sp = sp; /* override with new user stack pointer */ - memcpy(callee_regs, &childregs->regs[CALLEE_SAVED_FIRST_REG], - CALLEE_SAVED_REGS_COUNT * sizeof(unsigned long)); - - /* Save user stack top pointer so we can ID the stack vm area later. */ - p->thread.usp0 = childregs->sp; - - /* - * If CLONE_SETTLS is set, set "tp" in the new task to "r4", - * which is passed in as arg #5 to sys_clone(). - */ - if (clone_flags & CLONE_SETTLS) - childregs->tp = childregs->regs[4]; - - -#if CHIP_HAS_TILE_DMA() - /* - * No DMA in the new thread. We model this on the fact that - * fork() clears the pending signals, alarms, and aio for the child. - */ - memset(&p->thread.tile_dma_state, 0, sizeof(struct tile_dma_state)); - memset(&p->thread.dma_async_tlb, 0, sizeof(struct async_tlb)); -#endif - - /* New thread has its miscellaneous processor state bits clear. */ - p->thread.proc_status = 0; - -#ifdef CONFIG_HARDWALL - /* New thread does not own any networks. */ - memset(&p->thread.hardwall[0], 0, - sizeof(struct hardwall_task) * HARDWALL_TYPES); -#endif - - - /* - * Start the new thread with the current architecture state - * (user interrupt masks, etc.). - */ - save_arch_state(&p->thread); - - return 0; -} - -int set_unalign_ctl(struct task_struct *tsk, unsigned int val) -{ - task_thread_info(tsk)->align_ctl = val; - return 0; -} - -int get_unalign_ctl(struct task_struct *tsk, unsigned long adr) -{ - return put_user(task_thread_info(tsk)->align_ctl, - (unsigned int __user *)adr); -} - -static struct task_struct corrupt_current = { .comm = "<corrupt>" }; - -/* - * Return "current" if it looks plausible, or else a pointer to a dummy. - * This can be helpful if we are just trying to emit a clean panic. - */ -struct task_struct *validate_current(void) -{ - struct task_struct *tsk = current; - if (unlikely((unsigned long)tsk < PAGE_OFFSET || - (high_memory && (void *)tsk > high_memory) || - ((unsigned long)tsk & (__alignof__(*tsk) - 1)) != 0)) { - pr_err("Corrupt 'current' %p (sp %#lx)\n", tsk, stack_pointer); - tsk = &corrupt_current; - } - return tsk; -} - -/* Take and return the pointer to the previous task, for schedule_tail(). */ -struct task_struct *sim_notify_fork(struct task_struct *prev) -{ - struct task_struct *tsk = current; - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_FORK_PARENT | - (tsk->thread.creator_pid << _SIM_CONTROL_OPERATOR_BITS)); - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_FORK | - (tsk->pid << _SIM_CONTROL_OPERATOR_BITS)); - return prev; -} - -int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) -{ - struct pt_regs *ptregs = task_pt_regs(tsk); - elf_core_copy_regs(regs, ptregs); - return 1; -} - -#if CHIP_HAS_TILE_DMA() - -/* Allow user processes to access the DMA SPRs */ -void grant_dma_mpls(void) -{ -#if CONFIG_KERNEL_PL == 2 - __insn_mtspr(SPR_MPL_DMA_CPL_SET_1, 1); - __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_1, 1); -#else - __insn_mtspr(SPR_MPL_DMA_CPL_SET_0, 1); - __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_0, 1); -#endif -} - -/* Forbid user processes from accessing the DMA SPRs */ -void restrict_dma_mpls(void) -{ -#if CONFIG_KERNEL_PL == 2 - __insn_mtspr(SPR_MPL_DMA_CPL_SET_2, 1); - __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_2, 1); -#else - __insn_mtspr(SPR_MPL_DMA_CPL_SET_1, 1); - __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_1, 1); -#endif -} - -/* Pause the DMA engine, then save off its state registers. */ -static void save_tile_dma_state(struct tile_dma_state *dma) -{ - unsigned long state = __insn_mfspr(SPR_DMA_USER_STATUS); - unsigned long post_suspend_state; - - /* If we're running, suspend the engine. */ - if ((state & DMA_STATUS_MASK) == SPR_DMA_STATUS__RUNNING_MASK) - __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__SUSPEND_MASK); - - /* - * Wait for the engine to idle, then save regs. Note that we - * want to record the "running" bit from before suspension, - * and the "done" bit from after, so that we can properly - * distinguish a case where the user suspended the engine from - * the case where the kernel suspended as part of the context - * swap. - */ - do { - post_suspend_state = __insn_mfspr(SPR_DMA_USER_STATUS); - } while (post_suspend_state & SPR_DMA_STATUS__BUSY_MASK); - - dma->src = __insn_mfspr(SPR_DMA_SRC_ADDR); - dma->src_chunk = __insn_mfspr(SPR_DMA_SRC_CHUNK_ADDR); - dma->dest = __insn_mfspr(SPR_DMA_DST_ADDR); - dma->dest_chunk = __insn_mfspr(SPR_DMA_DST_CHUNK_ADDR); - dma->strides = __insn_mfspr(SPR_DMA_STRIDE); - dma->chunk_size = __insn_mfspr(SPR_DMA_CHUNK_SIZE); - dma->byte = __insn_mfspr(SPR_DMA_BYTE); - dma->status = (state & SPR_DMA_STATUS__RUNNING_MASK) | - (post_suspend_state & SPR_DMA_STATUS__DONE_MASK); -} - -/* Restart a DMA that was running before we were context-switched out. */ -static void restore_tile_dma_state(struct thread_struct *t) -{ - const struct tile_dma_state *dma = &t->tile_dma_state; - - /* - * The only way to restore the done bit is to run a zero - * length transaction. - */ - if ((dma->status & SPR_DMA_STATUS__DONE_MASK) && - !(__insn_mfspr(SPR_DMA_USER_STATUS) & SPR_DMA_STATUS__DONE_MASK)) { - __insn_mtspr(SPR_DMA_BYTE, 0); - __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK); - while (__insn_mfspr(SPR_DMA_USER_STATUS) & - SPR_DMA_STATUS__BUSY_MASK) - ; - } - - __insn_mtspr(SPR_DMA_SRC_ADDR, dma->src); - __insn_mtspr(SPR_DMA_SRC_CHUNK_ADDR, dma->src_chunk); - __insn_mtspr(SPR_DMA_DST_ADDR, dma->dest); - __insn_mtspr(SPR_DMA_DST_CHUNK_ADDR, dma->dest_chunk); - __insn_mtspr(SPR_DMA_STRIDE, dma->strides); - __insn_mtspr(SPR_DMA_CHUNK_SIZE, dma->chunk_size); - __insn_mtspr(SPR_DMA_BYTE, dma->byte); - - /* - * Restart the engine if we were running and not done. - * Clear a pending async DMA fault that we were waiting on return - * to user space to execute, since we expect the DMA engine - * to regenerate those faults for us now. Note that we don't - * try to clear the TIF_ASYNC_TLB flag, since it's relatively - * harmless if set, and it covers both DMA and the SN processor. - */ - if ((dma->status & DMA_STATUS_MASK) == SPR_DMA_STATUS__RUNNING_MASK) { - t->dma_async_tlb.fault_num = 0; - __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK); - } -} - -#endif - -static void save_arch_state(struct thread_struct *t) -{ -#if CHIP_HAS_SPLIT_INTR_MASK() - t->interrupt_mask = __insn_mfspr(SPR_INTERRUPT_MASK_0_0) | - ((u64)__insn_mfspr(SPR_INTERRUPT_MASK_0_1) << 32); -#else - t->interrupt_mask = __insn_mfspr(SPR_INTERRUPT_MASK_0); -#endif - t->ex_context[0] = __insn_mfspr(SPR_EX_CONTEXT_0_0); - t->ex_context[1] = __insn_mfspr(SPR_EX_CONTEXT_0_1); - t->system_save[0] = __insn_mfspr(SPR_SYSTEM_SAVE_0_0); - t->system_save[1] = __insn_mfspr(SPR_SYSTEM_SAVE_0_1); - t->system_save[2] = __insn_mfspr(SPR_SYSTEM_SAVE_0_2); - t->system_save[3] = __insn_mfspr(SPR_SYSTEM_SAVE_0_3); - t->intctrl_0 = __insn_mfspr(SPR_INTCTRL_0_STATUS); - t->proc_status = __insn_mfspr(SPR_PROC_STATUS); -#if !CHIP_HAS_FIXED_INTVEC_BASE() - t->interrupt_vector_base = __insn_mfspr(SPR_INTERRUPT_VECTOR_BASE_0); -#endif - t->tile_rtf_hwm = __insn_mfspr(SPR_TILE_RTF_HWM); -#if CHIP_HAS_DSTREAM_PF() - t->dstream_pf = __insn_mfspr(SPR_DSTREAM_PF); -#endif -} - -static void restore_arch_state(const struct thread_struct *t) -{ -#if CHIP_HAS_SPLIT_INTR_MASK() - __insn_mtspr(SPR_INTERRUPT_MASK_0_0, (u32) t->interrupt_mask); - __insn_mtspr(SPR_INTERRUPT_MASK_0_1, t->interrupt_mask >> 32); -#else - __insn_mtspr(SPR_INTERRUPT_MASK_0, t->interrupt_mask); -#endif - __insn_mtspr(SPR_EX_CONTEXT_0_0, t->ex_context[0]); - __insn_mtspr(SPR_EX_CONTEXT_0_1, t->ex_context[1]); - __insn_mtspr(SPR_SYSTEM_SAVE_0_0, t->system_save[0]); - __insn_mtspr(SPR_SYSTEM_SAVE_0_1, t->system_save[1]); - __insn_mtspr(SPR_SYSTEM_SAVE_0_2, t->system_save[2]); - __insn_mtspr(SPR_SYSTEM_SAVE_0_3, t->system_save[3]); - __insn_mtspr(SPR_INTCTRL_0_STATUS, t->intctrl_0); - __insn_mtspr(SPR_PROC_STATUS, t->proc_status); -#if !CHIP_HAS_FIXED_INTVEC_BASE() - __insn_mtspr(SPR_INTERRUPT_VECTOR_BASE_0, t->interrupt_vector_base); -#endif - __insn_mtspr(SPR_TILE_RTF_HWM, t->tile_rtf_hwm); -#if CHIP_HAS_DSTREAM_PF() - __insn_mtspr(SPR_DSTREAM_PF, t->dstream_pf); -#endif -} - - -void _prepare_arch_switch(struct task_struct *next) -{ -#if CHIP_HAS_TILE_DMA() - struct tile_dma_state *dma = ¤t->thread.tile_dma_state; - if (dma->enabled) - save_tile_dma_state(dma); -#endif -} - - -struct task_struct *__sched _switch_to(struct task_struct *prev, - struct task_struct *next) -{ - /* DMA state is already saved; save off other arch state. */ - save_arch_state(&prev->thread); - -#if CHIP_HAS_TILE_DMA() - /* - * Restore DMA in new task if desired. - * Note that it is only safe to restart here since interrupts - * are disabled, so we can't take any DMATLB miss or access - * interrupts before we have finished switching stacks. - */ - if (next->thread.tile_dma_state.enabled) { - restore_tile_dma_state(&next->thread); - grant_dma_mpls(); - } else { - restrict_dma_mpls(); - } -#endif - - /* Restore other arch state. */ - restore_arch_state(&next->thread); - -#ifdef CONFIG_HARDWALL - /* Enable or disable access to the network registers appropriately. */ - hardwall_switch_tasks(prev, next); -#endif - - /* Notify the simulator of task exit. */ - if (unlikely(prev->state == TASK_DEAD)) - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_EXIT | - (prev->pid << _SIM_CONTROL_OPERATOR_BITS)); - - /* - * Switch kernel SP, PC, and callee-saved registers. - * In the context of the new task, return the old task pointer - * (i.e. the task that actually called __switch_to). - * Pass the value to use for SYSTEM_SAVE_K_0 when we reset our sp. - */ - return __switch_to(prev, next, next_current_ksp0(next)); -} - -/* - * This routine is called on return from interrupt if any of the - * TIF_ALLWORK_MASK flags are set in thread_info->flags. It is - * entered with interrupts disabled so we don't miss an event that - * modified the thread_info flags. We loop until all the tested flags - * are clear. Note that the function is called on certain conditions - * that are not listed in the loop condition here (e.g. SINGLESTEP) - * which guarantees we will do those things once, and redo them if any - * of the other work items is re-done, but won't continue looping if - * all the other work is done. - */ -void prepare_exit_to_usermode(struct pt_regs *regs, u32 thread_info_flags) -{ - if (WARN_ON(!user_mode(regs))) - return; - - do { - local_irq_enable(); - - if (thread_info_flags & _TIF_NEED_RESCHED) - schedule(); - -#if CHIP_HAS_TILE_DMA() - if (thread_info_flags & _TIF_ASYNC_TLB) - do_async_page_fault(regs); -#endif - - if (thread_info_flags & _TIF_SIGPENDING) - do_signal(regs); - - if (thread_info_flags & _TIF_NOTIFY_RESUME) { - clear_thread_flag(TIF_NOTIFY_RESUME); - tracehook_notify_resume(regs); - } - - local_irq_disable(); - thread_info_flags = READ_ONCE(current_thread_info()->flags); - - } while (thread_info_flags & _TIF_WORK_MASK); - - if (thread_info_flags & _TIF_SINGLESTEP) { - single_step_once(regs); -#ifndef __tilegx__ - /* - * FIXME: on tilepro, since we enable interrupts in - * this routine, it's possible that we miss a signal - * or other asynchronous event. - */ - local_irq_disable(); -#endif - } - - user_enter(); -} - -unsigned long get_wchan(struct task_struct *p) -{ - struct KBacktraceIterator kbt; - - if (!p || p == current || p->state == TASK_RUNNING) - return 0; - - for (KBacktraceIterator_init(&kbt, p, NULL); - !KBacktraceIterator_end(&kbt); - KBacktraceIterator_next(&kbt)) { - if (!in_sched_functions(kbt.it.pc)) - return kbt.it.pc; - } - - return 0; -} - -/* Flush thread state. */ -void flush_thread(void) -{ - /* Nothing */ -} - -/* - * Free current thread data structures etc.. - */ -void exit_thread(struct task_struct *tsk) -{ -#ifdef CONFIG_HARDWALL - /* - * Remove the task from the list of tasks that are associated - * with any live hardwalls. (If the task that is exiting held - * the last reference to a hardwall fd, it would already have - * been released and deactivated at this point.) - */ - hardwall_deactivate_all(tsk); -#endif -} - -void tile_show_regs(struct pt_regs *regs) -{ - int i; -#ifdef __tilegx__ - for (i = 0; i < 17; i++) - pr_err(" r%-2d: "REGFMT" r%-2d: "REGFMT" r%-2d: "REGFMT"\n", - i, regs->regs[i], i+18, regs->regs[i+18], - i+36, regs->regs[i+36]); - pr_err(" r17: "REGFMT" r35: "REGFMT" tp : "REGFMT"\n", - regs->regs[17], regs->regs[35], regs->tp); - pr_err(" sp : "REGFMT" lr : "REGFMT"\n", regs->sp, regs->lr); -#else - for (i = 0; i < 13; i++) - pr_err(" r%-2d: "REGFMT" r%-2d: "REGFMT - " r%-2d: "REGFMT" r%-2d: "REGFMT"\n", - i, regs->regs[i], i+14, regs->regs[i+14], - i+27, regs->regs[i+27], i+40, regs->regs[i+40]); - pr_err(" r13: "REGFMT" tp : "REGFMT" sp : "REGFMT" lr : "REGFMT"\n", - regs->regs[13], regs->tp, regs->sp, regs->lr); -#endif - pr_err(" pc : "REGFMT" ex1: %ld faultnum: %ld flags:%s%s%s%s\n", - regs->pc, regs->ex1, regs->faultnum, - is_compat_task() ? " compat" : "", - (regs->flags & PT_FLAGS_DISABLE_IRQ) ? " noirq" : "", - !(regs->flags & PT_FLAGS_CALLER_SAVES) ? " nocallersave" : "", - (regs->flags & PT_FLAGS_RESTORE_REGS) ? " restoreregs" : ""); -} - -void show_regs(struct pt_regs *regs) -{ - struct KBacktraceIterator kbt; - - show_regs_print_info(KERN_DEFAULT); - tile_show_regs(regs); - - KBacktraceIterator_init(&kbt, NULL, regs); - tile_show_stack(&kbt); -} - -#ifdef __tilegx__ -void nmi_raise_cpu_backtrace(struct cpumask *in_mask) -{ - struct cpumask mask; - HV_Coord tile; - unsigned int timeout; - int cpu; - HV_NMI_Info info[NR_CPUS]; - - /* Tentatively dump stack on remote tiles via NMI. */ - timeout = 100; - cpumask_copy(&mask, in_mask); - while (!cpumask_empty(&mask) && timeout) { - for_each_cpu(cpu, &mask) { - tile.x = cpu_x(cpu); - tile.y = cpu_y(cpu); - info[cpu] = hv_send_nmi(tile, TILE_NMI_DUMP_STACK, 0); - if (info[cpu].result == HV_NMI_RESULT_OK) - cpumask_clear_cpu(cpu, &mask); - } - - mdelay(10); - touch_softlockup_watchdog(); - timeout--; - } - - /* Warn about cpus stuck in ICS. */ - if (!cpumask_empty(&mask)) { - for_each_cpu(cpu, &mask) { - - /* Clear the bit as if nmi_cpu_backtrace() ran. */ - cpumask_clear_cpu(cpu, in_mask); - - switch (info[cpu].result) { - case HV_NMI_RESULT_FAIL_ICS: - pr_warn("Skipping stack dump of cpu %d in ICS at pc %#llx\n", - cpu, info[cpu].pc); - break; - case HV_NMI_RESULT_FAIL_HV: - pr_warn("Skipping stack dump of cpu %d in hypervisor\n", - cpu); - break; - case HV_ENOSYS: - WARN_ONCE(1, "Hypervisor too old to allow remote stack dumps.\n"); - break; - default: /* should not happen */ - pr_warn("Skipping stack dump of cpu %d [%d,%#llx]\n", - cpu, info[cpu].result, info[cpu].pc); - break; - } - } - } -} - -void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self) -{ - nmi_trigger_cpumask_backtrace(mask, exclude_self, - nmi_raise_cpu_backtrace); -} -#endif /* __tilegx_ */ diff --git a/arch/tile/kernel/ptrace.c b/arch/tile/kernel/ptrace.c deleted file mode 100644 index d516d61751c2..000000000000 --- a/arch/tile/kernel/ptrace.c +++ /dev/null @@ -1,316 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Copied from i386: Ross Biro 1/23/92 - */ - -#include <linux/kernel.h> -#include <linux/ptrace.h> -#include <linux/kprobes.h> -#include <linux/compat.h> -#include <linux/uaccess.h> -#include <linux/regset.h> -#include <linux/elf.h> -#include <linux/tracehook.h> -#include <linux/context_tracking.h> -#include <linux/sched/task_stack.h> - -#include <asm/traps.h> -#include <arch/chip.h> - -#define CREATE_TRACE_POINTS -#include <trace/events/syscalls.h> - -void user_enable_single_step(struct task_struct *child) -{ - set_tsk_thread_flag(child, TIF_SINGLESTEP); -} - -void user_disable_single_step(struct task_struct *child) -{ - clear_tsk_thread_flag(child, TIF_SINGLESTEP); -} - -/* - * Called by kernel/ptrace.c when detaching.. - */ -void ptrace_disable(struct task_struct *child) -{ - clear_tsk_thread_flag(child, TIF_SINGLESTEP); - - /* - * These two are currently unused, but will be set by arch_ptrace() - * and used in the syscall assembly when we do support them. - */ - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); -} - -/* - * Get registers from task and ready the result for userspace. - * Note that we localize the API issues to getregs() and putregs() at - * some cost in performance, e.g. we need a full pt_regs copy for - * PEEKUSR, and two copies for POKEUSR. But in general we expect - * GETREGS/PUTREGS to be the API of choice anyway. - */ -static char *getregs(struct task_struct *child, struct pt_regs *uregs) -{ - *uregs = *task_pt_regs(child); - - /* Set up flags ABI bits. */ - uregs->flags = 0; -#ifdef CONFIG_COMPAT - if (task_thread_info(child)->status & TS_COMPAT) - uregs->flags |= PT_FLAGS_COMPAT; -#endif - - return (char *)uregs; -} - -/* Put registers back to task. */ -static void putregs(struct task_struct *child, struct pt_regs *uregs) -{ - struct pt_regs *regs = task_pt_regs(child); - - /* Don't allow overwriting the kernel-internal flags word. */ - uregs->flags = regs->flags; - - /* Only allow setting the ICS bit in the ex1 word. */ - uregs->ex1 = PL_ICS_EX1(USER_PL, EX1_ICS(uregs->ex1)); - - *regs = *uregs; -} - -enum tile_regset { - REGSET_GPR, -}; - -static int tile_gpr_get(struct task_struct *target, - const struct user_regset *regset, - unsigned int pos, unsigned int count, - void *kbuf, void __user *ubuf) -{ - struct pt_regs regs; - - getregs(target, ®s); - - return user_regset_copyout(&pos, &count, &kbuf, &ubuf, ®s, 0, - sizeof(regs)); -} - -static int tile_gpr_set(struct task_struct *target, - const struct user_regset *regset, - unsigned int pos, unsigned int count, - const void *kbuf, const void __user *ubuf) -{ - int ret; - struct pt_regs regs = *task_pt_regs(target); - - ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, ®s, 0, - sizeof(regs)); - if (ret) - return ret; - - putregs(target, ®s); - - return 0; -} - -static const struct user_regset tile_user_regset[] = { - [REGSET_GPR] = { - .core_note_type = NT_PRSTATUS, - .n = ELF_NGREG, - .size = sizeof(elf_greg_t), - .align = sizeof(elf_greg_t), - .get = tile_gpr_get, - .set = tile_gpr_set, - }, -}; - -static const struct user_regset_view tile_user_regset_view = { - .name = CHIP_ARCH_NAME, - .e_machine = ELF_ARCH, - .ei_osabi = ELF_OSABI, - .regsets = tile_user_regset, - .n = ARRAY_SIZE(tile_user_regset), -}; - -const struct user_regset_view *task_user_regset_view(struct task_struct *task) -{ - return &tile_user_regset_view; -} - -long arch_ptrace(struct task_struct *child, long request, - unsigned long addr, unsigned long data) -{ - unsigned long __user *datap = (long __user __force *)data; - unsigned long tmp; - long ret = -EIO; - char *childreg; - struct pt_regs copyregs; - - switch (request) { - - case PTRACE_PEEKUSR: /* Read register from pt_regs. */ - if (addr >= PTREGS_SIZE) - break; - childreg = getregs(child, ©regs) + addr; -#ifdef CONFIG_COMPAT - if (is_compat_task()) { - if (addr & (sizeof(compat_long_t)-1)) - break; - ret = put_user(*(compat_long_t *)childreg, - (compat_long_t __user *)datap); - } else -#endif - { - if (addr & (sizeof(long)-1)) - break; - ret = put_user(*(long *)childreg, datap); - } - break; - - case PTRACE_POKEUSR: /* Write register in pt_regs. */ - if (addr >= PTREGS_SIZE) - break; - childreg = getregs(child, ©regs) + addr; -#ifdef CONFIG_COMPAT - if (is_compat_task()) { - if (addr & (sizeof(compat_long_t)-1)) - break; - *(compat_long_t *)childreg = data; - } else -#endif - { - if (addr & (sizeof(long)-1)) - break; - *(long *)childreg = data; - } - putregs(child, ©regs); - ret = 0; - break; - - case PTRACE_GETREGS: /* Get all registers from the child. */ - ret = copy_regset_to_user(child, &tile_user_regset_view, - REGSET_GPR, 0, - sizeof(struct pt_regs), datap); - break; - - case PTRACE_SETREGS: /* Set all registers in the child. */ - ret = copy_regset_from_user(child, &tile_user_regset_view, - REGSET_GPR, 0, - sizeof(struct pt_regs), datap); - break; - - case PTRACE_GETFPREGS: /* Get the child FPU state. */ - case PTRACE_SETFPREGS: /* Set the child FPU state. */ - break; - - case PTRACE_SETOPTIONS: - /* Support TILE-specific ptrace options. */ - BUILD_BUG_ON(PTRACE_O_MASK_TILE & PTRACE_O_MASK); - tmp = data & PTRACE_O_MASK_TILE; - data &= ~PTRACE_O_MASK_TILE; - ret = ptrace_request(child, request, addr, data); - if (ret == 0) { - unsigned int flags = child->ptrace; - flags &= ~(PTRACE_O_MASK_TILE << PT_OPT_FLAG_SHIFT); - flags |= (tmp << PT_OPT_FLAG_SHIFT); - child->ptrace = flags; - } - break; - - default: -#ifdef CONFIG_COMPAT - if (task_thread_info(current)->status & TS_COMPAT) { - ret = compat_ptrace_request(child, request, - addr, data); - break; - } -#endif - ret = ptrace_request(child, request, addr, data); - break; - } - - return ret; -} - -#ifdef CONFIG_COMPAT -/* Not used; we handle compat issues in arch_ptrace() directly. */ -long compat_arch_ptrace(struct task_struct *child, compat_long_t request, - compat_ulong_t addr, compat_ulong_t data) -{ - BUG(); -} -#endif - -int do_syscall_trace_enter(struct pt_regs *regs) -{ - u32 work = READ_ONCE(current_thread_info()->flags); - - if ((work & _TIF_SYSCALL_TRACE) && - tracehook_report_syscall_entry(regs)) { - regs->regs[TREG_SYSCALL_NR] = -1; - return -1; - } - - if (secure_computing(NULL) == -1) - return -1; - - if (work & _TIF_SYSCALL_TRACEPOINT) - trace_sys_enter(regs, regs->regs[TREG_SYSCALL_NR]); - - return regs->regs[TREG_SYSCALL_NR]; -} - -void do_syscall_trace_exit(struct pt_regs *regs) -{ - long errno; - - /* - * The standard tile calling convention returns the value (or negative - * errno) in r0, and zero (or positive errno) in r1. - * It saves a couple of cycles on the hot path to do this work in - * registers only as we return, rather than updating the in-memory - * struct ptregs. - */ - errno = (long) regs->regs[0]; - if (errno < 0 && errno > -4096) - regs->regs[1] = -errno; - else - regs->regs[1] = 0; - - if (test_thread_flag(TIF_SYSCALL_TRACE)) - tracehook_report_syscall_exit(regs, 0); - - if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) - trace_sys_exit(regs, regs->regs[0]); -} - -void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs) -{ - struct siginfo info; - - memset(&info, 0, sizeof(info)); - info.si_signo = SIGTRAP; - info.si_code = TRAP_BRKPT; - info.si_addr = (void __user *) regs->pc; - - /* Send us the fakey SIGTRAP */ - force_sig_info(SIGTRAP, &info, tsk); -} - -/* Handle synthetic interrupt delivered only by the simulator. */ -void __kprobes do_breakpoint(struct pt_regs* regs, int fault_num) -{ - send_sigtrap(current, regs); -} diff --git a/arch/tile/kernel/reboot.c b/arch/tile/kernel/reboot.c deleted file mode 100644 index 6c5d2c070a12..000000000000 --- a/arch/tile/kernel/reboot.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/stddef.h> -#include <linux/reboot.h> -#include <linux/smp.h> -#include <linux/pm.h> -#include <linux/export.h> -#include <asm/page.h> -#include <asm/setup.h> -#include <hv/hypervisor.h> - -#ifndef CONFIG_SMP -#define smp_send_stop() -#endif - -void machine_halt(void) -{ - arch_local_irq_disable_all(); - smp_send_stop(); - hv_halt(); -} - -void machine_power_off(void) -{ - arch_local_irq_disable_all(); - smp_send_stop(); - hv_power_off(); -} - -void machine_restart(char *cmd) -{ - arch_local_irq_disable_all(); - smp_send_stop(); - hv_restart((HV_VirtAddr) "vmlinux", (HV_VirtAddr) cmd); -} - -/* No interesting distinction to be made here. */ -void (*pm_power_off)(void) = NULL; -EXPORT_SYMBOL(pm_power_off); diff --git a/arch/tile/kernel/regs_32.S b/arch/tile/kernel/regs_32.S deleted file mode 100644 index 542cae17a93a..000000000000 --- a/arch/tile/kernel/regs_32.S +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/linkage.h> -#include <asm/ptrace.h> -#include <asm/asm-offsets.h> -#include <arch/spr_def.h> -#include <asm/processor.h> -#include <asm/switch_to.h> - -/* - * See <asm/switch_to.h>; called with prev and next task_struct pointers. - * "prev" is returned in r0 for _switch_to and also for ret_from_fork. - * - * We want to save pc/sp in "prev", and get the new pc/sp from "next". - * We also need to save all the callee-saved registers on the stack. - * - * Intel enables/disables access to the hardware cycle counter in - * seccomp (secure computing) environments if necessary, based on - * has_secure_computing(). We might want to do this at some point, - * though it would require virtualizing the other SPRs under WORLD_ACCESS. - * - * Since we're saving to the stack, we omit sp from this list. - * And for parallels with other architectures, we save lr separately, - * in the thread_struct itself (as the "pc" field). - * - * This code also needs to be aligned with process.c copy_thread() - */ - -#if CALLEE_SAVED_REGS_COUNT != 24 -# error Mismatch between <asm/switch_to.h> and kernel/entry.S -#endif -#define FRAME_SIZE ((2 + CALLEE_SAVED_REGS_COUNT) * 4) - -#define SAVE_REG(r) { sw r12, r; addi r12, r12, 4 } -#define LOAD_REG(r) { lw r, r12; addi r12, r12, 4 } -#define FOR_EACH_CALLEE_SAVED_REG(f) \ - f(r30); f(r31); \ - f(r32); f(r33); f(r34); f(r35); f(r36); f(r37); f(r38); f(r39); \ - f(r40); f(r41); f(r42); f(r43); f(r44); f(r45); f(r46); f(r47); \ - f(r48); f(r49); f(r50); f(r51); f(r52); - -STD_ENTRY_SECTION(__switch_to, .sched.text) - { - move r10, sp - sw sp, lr - addi sp, sp, -FRAME_SIZE - } - { - addi r11, sp, 4 - addi r12, sp, 8 - } - { - sw r11, r10 - addli r4, r1, TASK_STRUCT_THREAD_KSP_OFFSET - } - { - lw r13, r4 /* Load new sp to a temp register early. */ - addli r3, r0, TASK_STRUCT_THREAD_KSP_OFFSET - } - FOR_EACH_CALLEE_SAVED_REG(SAVE_REG) - { - sw r3, sp - addli r3, r0, TASK_STRUCT_THREAD_PC_OFFSET - } - { - sw r3, lr - addli r4, r1, TASK_STRUCT_THREAD_PC_OFFSET - } - { - lw lr, r4 - addi r12, r13, 8 - } - { - /* Update sp and ksp0 simultaneously to avoid backtracer warnings. */ - move sp, r13 - mtspr SPR_SYSTEM_SAVE_K_0, r2 - } - FOR_EACH_CALLEE_SAVED_REG(LOAD_REG) -.L__switch_to_pc: - { - addi sp, sp, FRAME_SIZE - jrp lr /* r0 is still valid here, so return it */ - } - STD_ENDPROC(__switch_to) - -/* Return a suitable address for the backtracer for suspended threads */ -STD_ENTRY_SECTION(get_switch_to_pc, .sched.text) - lnk r0 - { - addli r0, r0, .L__switch_to_pc - . - jrp lr - } - STD_ENDPROC(get_switch_to_pc) - -STD_ENTRY(get_pt_regs) - .irp reg, r0, r1, r2, r3, r4, r5, r6, r7, \ - r8, r9, r10, r11, r12, r13, r14, r15, \ - r16, r17, r18, r19, r20, r21, r22, r23, \ - r24, r25, r26, r27, r28, r29, r30, r31, \ - r32, r33, r34, r35, r36, r37, r38, r39, \ - r40, r41, r42, r43, r44, r45, r46, r47, \ - r48, r49, r50, r51, r52, tp, sp - { - sw r0, \reg - addi r0, r0, 4 - } - .endr - { - sw r0, lr - addi r0, r0, PTREGS_OFFSET_PC - PTREGS_OFFSET_LR - } - lnk r1 - { - sw r0, r1 - addi r0, r0, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC - } - mfspr r1, INTERRUPT_CRITICAL_SECTION - shli r1, r1, SPR_EX_CONTEXT_1_1__ICS_SHIFT - ori r1, r1, KERNEL_PL - { - sw r0, r1 - addi r0, r0, PTREGS_OFFSET_FAULTNUM - PTREGS_OFFSET_EX1 - } - { - sw r0, zero /* clear faultnum */ - addi r0, r0, PTREGS_OFFSET_ORIG_R0 - PTREGS_OFFSET_FAULTNUM - } - { - sw r0, zero /* clear orig_r0 */ - addli r0, r0, -PTREGS_OFFSET_ORIG_R0 /* restore r0 to base */ - } - jrp lr - STD_ENDPROC(get_pt_regs) diff --git a/arch/tile/kernel/regs_64.S b/arch/tile/kernel/regs_64.S deleted file mode 100644 index bbffcc6f340f..000000000000 --- a/arch/tile/kernel/regs_64.S +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/linkage.h> -#include <asm/ptrace.h> -#include <asm/asm-offsets.h> -#include <arch/spr_def.h> -#include <asm/processor.h> -#include <asm/switch_to.h> - -/* - * See <asm/switch_to.h>; called with prev and next task_struct pointers. - * "prev" is returned in r0 for _switch_to and also for ret_from_fork. - * - * We want to save pc/sp in "prev", and get the new pc/sp from "next". - * We also need to save all the callee-saved registers on the stack. - * - * Intel enables/disables access to the hardware cycle counter in - * seccomp (secure computing) environments if necessary, based on - * has_secure_computing(). We might want to do this at some point, - * though it would require virtualizing the other SPRs under WORLD_ACCESS. - * - * Since we're saving to the stack, we omit sp from this list. - * And for parallels with other architectures, we save lr separately, - * in the thread_struct itself (as the "pc" field). - * - * This code also needs to be aligned with process.c copy_thread() - */ - -#if CALLEE_SAVED_REGS_COUNT != 24 -# error Mismatch between <asm/switch_to.h> and kernel/entry.S -#endif -#define FRAME_SIZE ((2 + CALLEE_SAVED_REGS_COUNT) * 8) - -#define SAVE_REG(r) { st r12, r; addi r12, r12, 8 } -#define LOAD_REG(r) { ld r, r12; addi r12, r12, 8 } -#define FOR_EACH_CALLEE_SAVED_REG(f) \ - f(r30); f(r31); \ - f(r32); f(r33); f(r34); f(r35); f(r36); f(r37); f(r38); f(r39); \ - f(r40); f(r41); f(r42); f(r43); f(r44); f(r45); f(r46); f(r47); \ - f(r48); f(r49); f(r50); f(r51); f(r52); - -STD_ENTRY_SECTION(__switch_to, .sched.text) - { - move r10, sp - st sp, lr - } - { - addli r11, sp, -FRAME_SIZE + 8 - addli sp, sp, -FRAME_SIZE - } - { - st r11, r10 - addli r4, r1, TASK_STRUCT_THREAD_KSP_OFFSET - } - { - ld r13, r4 /* Load new sp to a temp register early. */ - addi r12, sp, 16 - } - FOR_EACH_CALLEE_SAVED_REG(SAVE_REG) - addli r3, r0, TASK_STRUCT_THREAD_KSP_OFFSET - { - st r3, sp - addli r3, r0, TASK_STRUCT_THREAD_PC_OFFSET - } - { - st r3, lr - addli r4, r1, TASK_STRUCT_THREAD_PC_OFFSET - } - { - ld lr, r4 - addi r12, r13, 16 - } - { - /* Update sp and ksp0 simultaneously to avoid backtracer warnings. */ - move sp, r13 - mtspr SPR_SYSTEM_SAVE_K_0, r2 - } - FOR_EACH_CALLEE_SAVED_REG(LOAD_REG) -.L__switch_to_pc: - { - addli sp, sp, FRAME_SIZE - jrp lr /* r0 is still valid here, so return it */ - } - STD_ENDPROC(__switch_to) - -/* Return a suitable address for the backtracer for suspended threads */ -STD_ENTRY_SECTION(get_switch_to_pc, .sched.text) - lnk r0 - { - addli r0, r0, .L__switch_to_pc - . - jrp lr - } - STD_ENDPROC(get_switch_to_pc) - -STD_ENTRY(get_pt_regs) - .irp reg, r0, r1, r2, r3, r4, r5, r6, r7, \ - r8, r9, r10, r11, r12, r13, r14, r15, \ - r16, r17, r18, r19, r20, r21, r22, r23, \ - r24, r25, r26, r27, r28, r29, r30, r31, \ - r32, r33, r34, r35, r36, r37, r38, r39, \ - r40, r41, r42, r43, r44, r45, r46, r47, \ - r48, r49, r50, r51, r52, tp, sp - { - st r0, \reg - addi r0, r0, 8 - } - .endr - { - st r0, lr - addi r0, r0, PTREGS_OFFSET_PC - PTREGS_OFFSET_LR - } - lnk r1 - { - st r0, r1 - addi r0, r0, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC - } - mfspr r1, INTERRUPT_CRITICAL_SECTION - shli r1, r1, SPR_EX_CONTEXT_1_1__ICS_SHIFT - ori r1, r1, KERNEL_PL - { - st r0, r1 - addi r0, r0, PTREGS_OFFSET_FAULTNUM - PTREGS_OFFSET_EX1 - } - { - st r0, zero /* clear faultnum */ - addi r0, r0, PTREGS_OFFSET_ORIG_R0 - PTREGS_OFFSET_FAULTNUM - } - { - st r0, zero /* clear orig_r0 */ - addli r0, r0, -PTREGS_OFFSET_ORIG_R0 /* restore r0 to base */ - } - jrp lr - STD_ENDPROC(get_pt_regs) diff --git a/arch/tile/kernel/relocate_kernel_32.S b/arch/tile/kernel/relocate_kernel_32.S deleted file mode 100644 index e44fbcf8cbd5..000000000000 --- a/arch/tile/kernel/relocate_kernel_32.S +++ /dev/null @@ -1,269 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * copy new kernel into place and then call hv_reexec - * - */ - -#include <linux/linkage.h> -#include <arch/chip.h> -#include <asm/page.h> -#include <hv/hypervisor.h> - -#undef RELOCATE_NEW_KERNEL_VERBOSE - -STD_ENTRY(relocate_new_kernel) - - move r30, r0 /* page list */ - move r31, r1 /* address of page we are on */ - move r32, r2 /* start address of new kernel */ - - shri r1, r1, PAGE_SHIFT - addi r1, r1, 1 - shli sp, r1, PAGE_SHIFT - addi sp, sp, -8 - /* we now have a stack (whether we need one or not) */ - - moveli r40, lo16(hv_console_putc) - auli r40, r40, ha16(hv_console_putc) - -#ifdef RELOCATE_NEW_KERNEL_VERBOSE - moveli r0, 'r' - jalr r40 - - moveli r0, '_' - jalr r40 - - moveli r0, 'n' - jalr r40 - - moveli r0, '_' - jalr r40 - - moveli r0, 'k' - jalr r40 - - moveli r0, '\n' - jalr r40 -#endif - - /* - * Throughout this code r30 is pointer to the element of page - * list we are working on. - * - * Normally we get to the next element of the page list by - * incrementing r30 by four. The exception is if the element - * on the page list is an IND_INDIRECTION in which case we use - * the element with the low bits masked off as the new value - * of r30. - * - * To get this started, we need the value passed to us (which - * will always be an IND_INDIRECTION) in memory somewhere with - * r30 pointing at it. To do that, we push the value passed - * to us on the stack and make r30 point to it. - */ - - sw sp, r30 - move r30, sp - addi sp, sp, -8 - - /* - * On TILEPro, we need to flush all tiles' caches, since we may - * have been doing hash-for-home caching there. Note that we - * must do this _after_ we're completely done modifying any memory - * other than our output buffer (which we know is locally cached). - * We want the caches to be fully clean when we do the reexec, - * because the hypervisor is going to do this flush again at that - * point, and we don't want that second flush to overwrite any memory. - */ - { - move r0, zero /* cache_pa */ - move r1, zero - } - { - auli r2, zero, ha16(HV_FLUSH_EVICT_L2) /* cache_control */ - movei r3, -1 /* cache_cpumask; -1 means all client tiles */ - } - { - move r4, zero /* tlb_va */ - move r5, zero /* tlb_length */ - } - { - move r6, zero /* tlb_pgsize */ - move r7, zero /* tlb_cpumask */ - } - { - move r8, zero /* asids */ - moveli r20, lo16(hv_flush_remote) - } - { - move r9, zero /* asidcount */ - auli r20, r20, ha16(hv_flush_remote) - } - - jalr r20 - - /* r33 is destination pointer, default to zero */ - - moveli r33, 0 - -.Lloop: lw r10, r30 - - andi r9, r10, 0xf /* low 4 bits tell us what type it is */ - xor r10, r10, r9 /* r10 is now value with low 4 bits stripped */ - - seqi r0, r9, 0x1 /* IND_DESTINATION */ - bzt r0, .Ltry2 - - move r33, r10 - -#ifdef RELOCATE_NEW_KERNEL_VERBOSE - moveli r0, 'd' - jalr r40 -#endif - - addi r30, r30, 4 - j .Lloop - -.Ltry2: - seqi r0, r9, 0x2 /* IND_INDIRECTION */ - bzt r0, .Ltry4 - - move r30, r10 - -#ifdef RELOCATE_NEW_KERNEL_VERBOSE - moveli r0, 'i' - jalr r40 -#endif - - j .Lloop - -.Ltry4: - seqi r0, r9, 0x4 /* IND_DONE */ - bzt r0, .Ltry8 - - mf - -#ifdef RELOCATE_NEW_KERNEL_VERBOSE - moveli r0, 'D' - jalr r40 - moveli r0, '\n' - jalr r40 -#endif - - move r0, r32 - moveli r1, 0 /* arg to hv_reexec is 64 bits */ - - moveli r41, lo16(hv_reexec) - auli r41, r41, ha16(hv_reexec) - - jalr r41 - - /* we should not get here */ - - moveli r0, '?' - jalr r40 - moveli r0, '\n' - jalr r40 - - j .Lhalt - -.Ltry8: seqi r0, r9, 0x8 /* IND_SOURCE */ - bz r0, .Lerr /* unknown type */ - - /* copy page at r10 to page at r33 */ - - move r11, r33 - - moveli r0, lo16(PAGE_SIZE) - auli r0, r0, ha16(PAGE_SIZE) - add r33, r33, r0 - - /* copy word at r10 to word at r11 until r11 equals r33 */ - - /* We know page size must be multiple of 16, so we can unroll - * 16 times safely without any edge case checking. - * - * Issue a flush of the destination every 16 words to avoid - * incoherence when starting the new kernel. (Now this is - * just good paranoia because the hv_reexec call will also - * take care of this.) - */ - -1: - { lw r0, r10; addi r10, r10, 4 } - { sw r11, r0; addi r11, r11, 4 } - { lw r0, r10; addi r10, r10, 4 } - { sw r11, r0; addi r11, r11, 4 } - { lw r0, r10; addi r10, r10, 4 } - { sw r11, r0; addi r11, r11, 4 } - { lw r0, r10; addi r10, r10, 4 } - { sw r11, r0; addi r11, r11, 4 } - { lw r0, r10; addi r10, r10, 4 } - { sw r11, r0; addi r11, r11, 4 } - { lw r0, r10; addi r10, r10, 4 } - { sw r11, r0; addi r11, r11, 4 } - { lw r0, r10; addi r10, r10, 4 } - { sw r11, r0; addi r11, r11, 4 } - { lw r0, r10; addi r10, r10, 4 } - { sw r11, r0; addi r11, r11, 4 } - { lw r0, r10; addi r10, r10, 4 } - { sw r11, r0; addi r11, r11, 4 } - { lw r0, r10; addi r10, r10, 4 } - { sw r11, r0; addi r11, r11, 4 } - { lw r0, r10; addi r10, r10, 4 } - { sw r11, r0; addi r11, r11, 4 } - { lw r0, r10; addi r10, r10, 4 } - { sw r11, r0; addi r11, r11, 4 } - { lw r0, r10; addi r10, r10, 4 } - { sw r11, r0; addi r11, r11, 4 } - { lw r0, r10; addi r10, r10, 4 } - { sw r11, r0; addi r11, r11, 4 } - { lw r0, r10; addi r10, r10, 4 } - { sw r11, r0; addi r11, r11, 4 } - { lw r0, r10; addi r10, r10, 4 } - { sw r11, r0 } - { flush r11 ; addi r11, r11, 4 } - - seq r0, r33, r11 - bzt r0, 1b - -#ifdef RELOCATE_NEW_KERNEL_VERBOSE - moveli r0, 's' - jalr r40 -#endif - - addi r30, r30, 4 - j .Lloop - - -.Lerr: moveli r0, 'e' - jalr r40 - moveli r0, 'r' - jalr r40 - moveli r0, 'r' - jalr r40 - moveli r0, '\n' - jalr r40 -.Lhalt: - moveli r41, lo16(hv_halt) - auli r41, r41, ha16(hv_halt) - - jalr r41 - STD_ENDPROC(relocate_new_kernel) - - .section .rodata,"a" - - .globl relocate_new_kernel_size -relocate_new_kernel_size: - .long .Lend_relocate_new_kernel - relocate_new_kernel diff --git a/arch/tile/kernel/relocate_kernel_64.S b/arch/tile/kernel/relocate_kernel_64.S deleted file mode 100644 index d9d8cf6176e8..000000000000 --- a/arch/tile/kernel/relocate_kernel_64.S +++ /dev/null @@ -1,263 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * copy new kernel into place and then call hv_reexec - * - */ - -#include <linux/linkage.h> -#include <arch/chip.h> -#include <asm/page.h> -#include <hv/hypervisor.h> - -#undef RELOCATE_NEW_KERNEL_VERBOSE - -STD_ENTRY(relocate_new_kernel) - - move r30, r0 /* page list */ - move r31, r1 /* address of page we are on */ - move r32, r2 /* start address of new kernel */ - - shrui r1, r1, PAGE_SHIFT - addi r1, r1, 1 - shli sp, r1, PAGE_SHIFT - addi sp, sp, -8 - /* we now have a stack (whether we need one or not) */ - -#ifdef RELOCATE_NEW_KERNEL_VERBOSE - moveli r40, hw2_last(hv_console_putc) - shl16insli r40, r40, hw1(hv_console_putc) - shl16insli r40, r40, hw0(hv_console_putc) - - moveli r0, 'r' - jalr r40 - - moveli r0, '_' - jalr r40 - - moveli r0, 'n' - jalr r40 - - moveli r0, '_' - jalr r40 - - moveli r0, 'k' - jalr r40 - - moveli r0, '\n' - jalr r40 -#endif - - /* - * Throughout this code r30 is pointer to the element of page - * list we are working on. - * - * Normally we get to the next element of the page list by - * incrementing r30 by eight. The exception is if the element - * on the page list is an IND_INDIRECTION in which case we use - * the element with the low bits masked off as the new value - * of r30. - * - * To get this started, we need the value passed to us (which - * will always be an IND_INDIRECTION) in memory somewhere with - * r30 pointing at it. To do that, we push the value passed - * to us on the stack and make r30 point to it. - */ - - st sp, r30 - move r30, sp - addi sp, sp, -16 - - /* - * On TILE-GX, we need to flush all tiles' caches, since we may - * have been doing hash-for-home caching there. Note that we - * must do this _after_ we're completely done modifying any memory - * other than our output buffer (which we know is locally cached). - * We want the caches to be fully clean when we do the reexec, - * because the hypervisor is going to do this flush again at that - * point, and we don't want that second flush to overwrite any memory. - */ - { - move r0, zero /* cache_pa */ - moveli r1, hw2_last(HV_FLUSH_EVICT_L2) - } - { - shl16insli r1, r1, hw1(HV_FLUSH_EVICT_L2) - movei r2, -1 /* cache_cpumask; -1 means all client tiles */ - } - { - shl16insli r1, r1, hw0(HV_FLUSH_EVICT_L2) /* cache_control */ - move r3, zero /* tlb_va */ - } - { - move r4, zero /* tlb_length */ - move r5, zero /* tlb_pgsize */ - } - { - move r6, zero /* tlb_cpumask */ - move r7, zero /* asids */ - } - { - moveli r20, hw2_last(hv_flush_remote) - move r8, zero /* asidcount */ - } - shl16insli r20, r20, hw1(hv_flush_remote) - shl16insli r20, r20, hw0(hv_flush_remote) - - jalr r20 - - /* r33 is destination pointer, default to zero */ - - moveli r33, 0 - -.Lloop: ld r10, r30 - - andi r9, r10, 0xf /* low 4 bits tell us what type it is */ - xor r10, r10, r9 /* r10 is now value with low 4 bits stripped */ - - cmpeqi r0, r9, 0x1 /* IND_DESTINATION */ - beqzt r0, .Ltry2 - - move r33, r10 - -#ifdef RELOCATE_NEW_KERNEL_VERBOSE - moveli r0, 'd' - jalr r40 -#endif - - addi r30, r30, 8 - j .Lloop - -.Ltry2: - cmpeqi r0, r9, 0x2 /* IND_INDIRECTION */ - beqzt r0, .Ltry4 - - move r30, r10 - -#ifdef RELOCATE_NEW_KERNEL_VERBOSE - moveli r0, 'i' - jalr r40 -#endif - - j .Lloop - -.Ltry4: - cmpeqi r0, r9, 0x4 /* IND_DONE */ - beqzt r0, .Ltry8 - - mf - -#ifdef RELOCATE_NEW_KERNEL_VERBOSE - moveli r0, 'D' - jalr r40 - moveli r0, '\n' - jalr r40 -#endif - - move r0, r32 - - moveli r41, hw2_last(hv_reexec) - shl16insli r41, r41, hw1(hv_reexec) - shl16insli r41, r41, hw0(hv_reexec) - - jalr r41 - - /* we should not get here */ - -#ifdef RELOCATE_NEW_KERNEL_VERBOSE - moveli r0, '?' - jalr r40 - moveli r0, '\n' - jalr r40 -#endif - - j .Lhalt - -.Ltry8: cmpeqi r0, r9, 0x8 /* IND_SOURCE */ - beqz r0, .Lerr /* unknown type */ - - /* copy page at r10 to page at r33 */ - - move r11, r33 - - moveli r0, hw2_last(PAGE_SIZE) - shl16insli r0, r0, hw1(PAGE_SIZE) - shl16insli r0, r0, hw0(PAGE_SIZE) - add r33, r33, r0 - - /* copy word at r10 to word at r11 until r11 equals r33 */ - - /* We know page size must be multiple of 8, so we can unroll - * 8 times safely without any edge case checking. - * - * Issue a flush of the destination every 8 words to avoid - * incoherence when starting the new kernel. (Now this is - * just good paranoia because the hv_reexec call will also - * take care of this.) - */ - -1: - { ld r0, r10; addi r10, r10, 8 } - { st r11, r0; addi r11, r11, 8 } - { ld r0, r10; addi r10, r10, 8 } - { st r11, r0; addi r11, r11, 8 } - { ld r0, r10; addi r10, r10, 8 } - { st r11, r0; addi r11, r11, 8 } - { ld r0, r10; addi r10, r10, 8 } - { st r11, r0; addi r11, r11, 8 } - { ld r0, r10; addi r10, r10, 8 } - { st r11, r0; addi r11, r11, 8 } - { ld r0, r10; addi r10, r10, 8 } - { st r11, r0; addi r11, r11, 8 } - { ld r0, r10; addi r10, r10, 8 } - { st r11, r0; addi r11, r11, 8 } - { ld r0, r10; addi r10, r10, 8 } - { st r11, r0 } - { flush r11 ; addi r11, r11, 8 } - - cmpeq r0, r33, r11 - beqzt r0, 1b - -#ifdef RELOCATE_NEW_KERNEL_VERBOSE - moveli r0, 's' - jalr r40 -#endif - - addi r30, r30, 8 - j .Lloop - - -.Lerr: -#ifdef RELOCATE_NEW_KERNEL_VERBOSE - moveli r0, 'e' - jalr r40 - moveli r0, 'r' - jalr r40 - moveli r0, 'r' - jalr r40 - moveli r0, '\n' - jalr r40 -#endif -.Lhalt: - moveli r41, hw2_last(hv_halt) - shl16insli r41, r41, hw1(hv_halt) - shl16insli r41, r41, hw0(hv_halt) - - jalr r41 - STD_ENDPROC(relocate_new_kernel) - - .section .rodata,"a" - - .globl relocate_new_kernel_size -relocate_new_kernel_size: - .long .Lend_relocate_new_kernel - relocate_new_kernel diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c deleted file mode 100644 index eb4e198f6f93..000000000000 --- a/arch/tile/kernel/setup.c +++ /dev/null @@ -1,1743 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mmzone.h> -#include <linux/bootmem.h> -#include <linux/module.h> -#include <linux/node.h> -#include <linux/cpu.h> -#include <linux/ioport.h> -#include <linux/irq.h> -#include <linux/kexec.h> -#include <linux/pci.h> -#include <linux/swiotlb.h> -#include <linux/initrd.h> -#include <linux/io.h> -#include <linux/highmem.h> -#include <linux/smp.h> -#include <linux/timex.h> -#include <linux/hugetlb.h> -#include <linux/start_kernel.h> -#include <linux/screen_info.h> -#include <linux/tick.h> -#include <asm/setup.h> -#include <asm/sections.h> -#include <asm/cacheflush.h> -#include <asm/pgalloc.h> -#include <asm/mmu_context.h> -#include <hv/hypervisor.h> -#include <arch/interrupts.h> - -/* <linux/smp.h> doesn't provide this definition. */ -#ifndef CONFIG_SMP -#define setup_max_cpus 1 -#endif - -static inline int ABS(int x) { return x >= 0 ? x : -x; } - -/* Chip information */ -char chip_model[64] __ro_after_init; - -#ifdef CONFIG_VT -struct screen_info screen_info; -#endif - -struct pglist_data node_data[MAX_NUMNODES] __read_mostly; -EXPORT_SYMBOL(node_data); - -/* Information on the NUMA nodes that we compute early */ -unsigned long node_start_pfn[MAX_NUMNODES]; -unsigned long node_end_pfn[MAX_NUMNODES]; -unsigned long __initdata node_memmap_pfn[MAX_NUMNODES]; -unsigned long __initdata node_percpu_pfn[MAX_NUMNODES]; -unsigned long __initdata node_free_pfn[MAX_NUMNODES]; - -static unsigned long __initdata node_percpu[MAX_NUMNODES]; - -/* - * per-CPU stack and boot info. - */ -DEFINE_PER_CPU(unsigned long, boot_sp) = - (unsigned long)init_stack + THREAD_SIZE - STACK_TOP_DELTA; - -#ifdef CONFIG_SMP -DEFINE_PER_CPU(unsigned long, boot_pc) = (unsigned long)start_kernel; -#else -/* - * The variable must be __initdata since it references __init code. - * With CONFIG_SMP it is per-cpu data, which is exempt from validation. - */ -unsigned long __initdata boot_pc = (unsigned long)start_kernel; -#endif - -#ifdef CONFIG_HIGHMEM -/* Page frame index of end of lowmem on each controller. */ -unsigned long node_lowmem_end_pfn[MAX_NUMNODES]; - -/* Number of pages that can be mapped into lowmem. */ -static unsigned long __initdata mappable_physpages; -#endif - -/* Data on which physical memory controller corresponds to which NUMA node */ -int node_controller[MAX_NUMNODES] = { [0 ... MAX_NUMNODES-1] = -1 }; - -#ifdef CONFIG_HIGHMEM -/* Map information from VAs to PAs */ -unsigned long pbase_map[1 << (32 - HPAGE_SHIFT)] - __ro_after_init __attribute__((aligned(L2_CACHE_BYTES))); -EXPORT_SYMBOL(pbase_map); - -/* Map information from PAs to VAs */ -void *vbase_map[NR_PA_HIGHBIT_VALUES] - __ro_after_init __attribute__((aligned(L2_CACHE_BYTES))); -EXPORT_SYMBOL(vbase_map); -#endif - -/* Node number as a function of the high PA bits */ -int highbits_to_node[NR_PA_HIGHBIT_VALUES] __ro_after_init; -EXPORT_SYMBOL(highbits_to_node); - -static unsigned int __initdata maxmem_pfn = -1U; -static unsigned int __initdata maxnodemem_pfn[MAX_NUMNODES] = { - [0 ... MAX_NUMNODES-1] = -1U -}; -static nodemask_t __initdata isolnodes; - -#if defined(CONFIG_PCI) && !defined(__tilegx__) -enum { DEFAULT_PCI_RESERVE_MB = 64 }; -static unsigned int __initdata pci_reserve_mb = DEFAULT_PCI_RESERVE_MB; -unsigned long __initdata pci_reserve_start_pfn = -1U; -unsigned long __initdata pci_reserve_end_pfn = -1U; -#endif - -static int __init setup_maxmem(char *str) -{ - unsigned long long maxmem; - if (str == NULL || (maxmem = memparse(str, NULL)) == 0) - return -EINVAL; - - maxmem_pfn = (maxmem >> HPAGE_SHIFT) << (HPAGE_SHIFT - PAGE_SHIFT); - pr_info("Forcing RAM used to no more than %dMB\n", - maxmem_pfn >> (20 - PAGE_SHIFT)); - return 0; -} -early_param("maxmem", setup_maxmem); - -static int __init setup_maxnodemem(char *str) -{ - char *endp; - unsigned long long maxnodemem; - unsigned long node; - - node = str ? simple_strtoul(str, &endp, 0) : INT_MAX; - if (node >= MAX_NUMNODES || *endp != ':') - return -EINVAL; - - maxnodemem = memparse(endp+1, NULL); - maxnodemem_pfn[node] = (maxnodemem >> HPAGE_SHIFT) << - (HPAGE_SHIFT - PAGE_SHIFT); - pr_info("Forcing RAM used on node %ld to no more than %dMB\n", - node, maxnodemem_pfn[node] >> (20 - PAGE_SHIFT)); - return 0; -} -early_param("maxnodemem", setup_maxnodemem); - -struct memmap_entry { - u64 addr; /* start of memory segment */ - u64 size; /* size of memory segment */ -}; -static struct memmap_entry memmap_map[64]; -static int memmap_nr; - -static void add_memmap_region(u64 addr, u64 size) -{ - if (memmap_nr >= ARRAY_SIZE(memmap_map)) { - pr_err("Ooops! Too many entries in the memory map!\n"); - return; - } - memmap_map[memmap_nr].addr = addr; - memmap_map[memmap_nr].size = size; - memmap_nr++; -} - -static int __init setup_memmap(char *p) -{ - char *oldp; - u64 start_at, mem_size; - - if (!p) - return -EINVAL; - - if (!strncmp(p, "exactmap", 8)) { - pr_err("\"memmap=exactmap\" not valid on tile\n"); - return 0; - } - - oldp = p; - mem_size = memparse(p, &p); - if (p == oldp) - return -EINVAL; - - if (*p == '@') { - pr_err("\"memmap=nn@ss\" (force RAM) invalid on tile\n"); - } else if (*p == '#') { - pr_err("\"memmap=nn#ss\" (force ACPI data) invalid on tile\n"); - } else if (*p == '$') { - start_at = memparse(p+1, &p); - add_memmap_region(start_at, mem_size); - } else { - if (mem_size == 0) - return -EINVAL; - maxmem_pfn = (mem_size >> HPAGE_SHIFT) << - (HPAGE_SHIFT - PAGE_SHIFT); - } - return *p == '\0' ? 0 : -EINVAL; -} -early_param("memmap", setup_memmap); - -static int __init setup_mem(char *str) -{ - return setup_maxmem(str); -} -early_param("mem", setup_mem); /* compatibility with x86 */ - -static int __init setup_isolnodes(char *str) -{ - if (str == NULL || nodelist_parse(str, isolnodes) != 0) - return -EINVAL; - - pr_info("Set isolnodes value to '%*pbl'\n", - nodemask_pr_args(&isolnodes)); - return 0; -} -early_param("isolnodes", setup_isolnodes); - -#if defined(CONFIG_PCI) && !defined(__tilegx__) -static int __init setup_pci_reserve(char* str) -{ - if (str == NULL || kstrtouint(str, 0, &pci_reserve_mb) != 0 || - pci_reserve_mb > 3 * 1024) - return -EINVAL; - - pr_info("Reserving %dMB for PCIE root complex mappings\n", - pci_reserve_mb); - return 0; -} -early_param("pci_reserve", setup_pci_reserve); -#endif - -#ifndef __tilegx__ -/* - * vmalloc=size forces the vmalloc area to be exactly 'size' bytes. - * This can be used to increase (or decrease) the vmalloc area. - */ -static int __init parse_vmalloc(char *arg) -{ - if (!arg) - return -EINVAL; - - VMALLOC_RESERVE = (memparse(arg, &arg) + PGDIR_SIZE - 1) & PGDIR_MASK; - - /* See validate_va() for more on this test. */ - if ((long)_VMALLOC_START >= 0) - early_panic("\"vmalloc=%#lx\" value too large: maximum %#lx\n", - VMALLOC_RESERVE, _VMALLOC_END - 0x80000000UL); - - return 0; -} -early_param("vmalloc", parse_vmalloc); -#endif - -#ifdef CONFIG_HIGHMEM -/* - * Determine for each controller where its lowmem is mapped and how much of - * it is mapped there. On controller zero, the first few megabytes are - * already mapped in as code at MEM_SV_START, so in principle we could - * start our data mappings higher up, but for now we don't bother, to avoid - * additional confusion. - * - * One question is whether, on systems with more than 768 Mb and - * controllers of different sizes, to map in a proportionate amount of - * each one, or to try to map the same amount from each controller. - * (E.g. if we have three controllers with 256MB, 1GB, and 256MB - * respectively, do we map 256MB from each, or do we map 128 MB, 512 - * MB, and 128 MB respectively?) For now we use a proportionate - * solution like the latter. - * - * The VA/PA mapping demands that we align our decisions at 16 MB - * boundaries so that we can rapidly convert VA to PA. - */ -static void *__init setup_pa_va_mapping(void) -{ - unsigned long curr_pages = 0; - unsigned long vaddr = PAGE_OFFSET; - nodemask_t highonlynodes = isolnodes; - int i, j; - - memset(pbase_map, -1, sizeof(pbase_map)); - memset(vbase_map, -1, sizeof(vbase_map)); - - /* Node zero cannot be isolated for LOWMEM purposes. */ - node_clear(0, highonlynodes); - - /* Count up the number of pages on non-highonlynodes controllers. */ - mappable_physpages = 0; - for_each_online_node(i) { - if (!node_isset(i, highonlynodes)) - mappable_physpages += - node_end_pfn[i] - node_start_pfn[i]; - } - - for_each_online_node(i) { - unsigned long start = node_start_pfn[i]; - unsigned long end = node_end_pfn[i]; - unsigned long size = end - start; - unsigned long vaddr_end; - - if (node_isset(i, highonlynodes)) { - /* Mark this controller as having no lowmem. */ - node_lowmem_end_pfn[i] = start; - continue; - } - - curr_pages += size; - if (mappable_physpages > MAXMEM_PFN) { - vaddr_end = PAGE_OFFSET + - (((u64)curr_pages * MAXMEM_PFN / - mappable_physpages) - << PAGE_SHIFT); - } else { - vaddr_end = PAGE_OFFSET + (curr_pages << PAGE_SHIFT); - } - for (j = 0; vaddr < vaddr_end; vaddr += HPAGE_SIZE, ++j) { - unsigned long this_pfn = - start + (j << HUGETLB_PAGE_ORDER); - pbase_map[vaddr >> HPAGE_SHIFT] = this_pfn; - if (vbase_map[__pfn_to_highbits(this_pfn)] == - (void *)-1) - vbase_map[__pfn_to_highbits(this_pfn)] = - (void *)(vaddr & HPAGE_MASK); - } - node_lowmem_end_pfn[i] = start + (j << HUGETLB_PAGE_ORDER); - BUG_ON(node_lowmem_end_pfn[i] > end); - } - - /* Return highest address of any mapped memory. */ - return (void *)vaddr; -} -#endif /* CONFIG_HIGHMEM */ - -/* - * Register our most important memory mappings with the debug stub. - * - * This is up to 4 mappings for lowmem, one mapping per memory - * controller, plus one for our text segment. - */ -static void store_permanent_mappings(void) -{ - int i; - - for_each_online_node(i) { - HV_PhysAddr pa = ((HV_PhysAddr)node_start_pfn[i]) << PAGE_SHIFT; -#ifdef CONFIG_HIGHMEM - HV_PhysAddr high_mapped_pa = node_lowmem_end_pfn[i]; -#else - HV_PhysAddr high_mapped_pa = node_end_pfn[i]; -#endif - - unsigned long pages = high_mapped_pa - node_start_pfn[i]; - HV_VirtAddr addr = (HV_VirtAddr) __va(pa); - hv_store_mapping(addr, pages << PAGE_SHIFT, pa); - } - - hv_store_mapping((HV_VirtAddr)_text, - (uint32_t)(_einittext - _text), 0); -} - -/* - * Use hv_inquire_physical() to populate node_{start,end}_pfn[] - * and node_online_map, doing suitable sanity-checking. - * Also set min_low_pfn, max_low_pfn, and max_pfn. - */ -static void __init setup_memory(void) -{ - int i, j; - int highbits_seen[NR_PA_HIGHBIT_VALUES] = { 0 }; -#ifdef CONFIG_HIGHMEM - long highmem_pages; -#endif -#ifndef __tilegx__ - int cap; -#endif -#if defined(CONFIG_HIGHMEM) || defined(__tilegx__) - long lowmem_pages; -#endif - unsigned long physpages = 0; - - /* We are using a char to hold the cpu_2_node[] mapping */ - BUILD_BUG_ON(MAX_NUMNODES > 127); - - /* Discover the ranges of memory available to us */ - for (i = 0; ; ++i) { - unsigned long start, size, end, highbits; - HV_PhysAddrRange range = hv_inquire_physical(i); - if (range.size == 0) - break; -#ifdef CONFIG_FLATMEM - if (i > 0) { - pr_err("Can't use discontiguous PAs: %#llx..%#llx\n", - range.size, range.start + range.size); - continue; - } -#endif -#ifndef __tilegx__ - if ((unsigned long)range.start) { - pr_err("Range not at 4GB multiple: %#llx..%#llx\n", - range.start, range.start + range.size); - continue; - } -#endif - if ((range.start & (HPAGE_SIZE-1)) != 0 || - (range.size & (HPAGE_SIZE-1)) != 0) { - unsigned long long start_pa = range.start; - unsigned long long orig_size = range.size; - range.start = (start_pa + HPAGE_SIZE - 1) & HPAGE_MASK; - range.size -= (range.start - start_pa); - range.size &= HPAGE_MASK; - pr_err("Range not hugepage-aligned: %#llx..%#llx: now %#llx-%#llx\n", - start_pa, start_pa + orig_size, - range.start, range.start + range.size); - } - highbits = __pa_to_highbits(range.start); - if (highbits >= NR_PA_HIGHBIT_VALUES) { - pr_err("PA high bits too high: %#llx..%#llx\n", - range.start, range.start + range.size); - continue; - } - if (highbits_seen[highbits]) { - pr_err("Range overlaps in high bits: %#llx..%#llx\n", - range.start, range.start + range.size); - continue; - } - highbits_seen[highbits] = 1; - if (PFN_DOWN(range.size) > maxnodemem_pfn[i]) { - int max_size = maxnodemem_pfn[i]; - if (max_size > 0) { - pr_err("Maxnodemem reduced node %d to %d pages\n", - i, max_size); - range.size = PFN_PHYS(max_size); - } else { - pr_err("Maxnodemem disabled node %d\n", i); - continue; - } - } - if (physpages + PFN_DOWN(range.size) > maxmem_pfn) { - int max_size = maxmem_pfn - physpages; - if (max_size > 0) { - pr_err("Maxmem reduced node %d to %d pages\n", - i, max_size); - range.size = PFN_PHYS(max_size); - } else { - pr_err("Maxmem disabled node %d\n", i); - continue; - } - } - if (i >= MAX_NUMNODES) { - pr_err("Too many PA nodes (#%d): %#llx...%#llx\n", - i, range.size, range.size + range.start); - continue; - } - - start = range.start >> PAGE_SHIFT; - size = range.size >> PAGE_SHIFT; - end = start + size; - -#ifndef __tilegx__ - if (((HV_PhysAddr)end << PAGE_SHIFT) != - (range.start + range.size)) { - pr_err("PAs too high to represent: %#llx..%#llx\n", - range.start, range.start + range.size); - continue; - } -#endif -#if defined(CONFIG_PCI) && !defined(__tilegx__) - /* - * Blocks that overlap the pci reserved region must - * have enough space to hold the maximum percpu data - * region at the top of the range. If there isn't - * enough space above the reserved region, just - * truncate the node. - */ - if (start <= pci_reserve_start_pfn && - end > pci_reserve_start_pfn) { - unsigned int per_cpu_size = - __per_cpu_end - __per_cpu_start; - unsigned int percpu_pages = - NR_CPUS * (PFN_UP(per_cpu_size) >> PAGE_SHIFT); - if (end < pci_reserve_end_pfn + percpu_pages) { - end = pci_reserve_start_pfn; - pr_err("PCI mapping region reduced node %d to %ld pages\n", - i, end - start); - } - } -#endif - - for (j = __pfn_to_highbits(start); - j <= __pfn_to_highbits(end - 1); j++) - highbits_to_node[j] = i; - - node_start_pfn[i] = start; - node_end_pfn[i] = end; - node_controller[i] = range.controller; - physpages += size; - max_pfn = end; - - /* Mark node as online */ - node_set(i, node_online_map); - node_set(i, node_possible_map); - } - -#ifndef __tilegx__ - /* - * For 4KB pages, mem_map "struct page" data is 1% of the size - * of the physical memory, so can be quite big (640 MB for - * four 16G zones). These structures must be mapped in - * lowmem, and since we currently cap out at about 768 MB, - * it's impractical to try to use this much address space. - * For now, arbitrarily cap the amount of physical memory - * we're willing to use at 8 million pages (32GB of 4KB pages). - */ - cap = 8 * 1024 * 1024; /* 8 million pages */ - if (physpages > cap) { - int num_nodes = num_online_nodes(); - int cap_each = cap / num_nodes; - unsigned long dropped_pages = 0; - for (i = 0; i < num_nodes; ++i) { - int size = node_end_pfn[i] - node_start_pfn[i]; - if (size > cap_each) { - dropped_pages += (size - cap_each); - node_end_pfn[i] = node_start_pfn[i] + cap_each; - } - } - physpages -= dropped_pages; - pr_warn("Only using %ldMB memory - ignoring %ldMB\n", - physpages >> (20 - PAGE_SHIFT), - dropped_pages >> (20 - PAGE_SHIFT)); - pr_warn("Consider using a larger page size\n"); - } -#endif - - /* Heap starts just above the last loaded address. */ - min_low_pfn = PFN_UP((unsigned long)_end - PAGE_OFFSET); - -#ifdef CONFIG_HIGHMEM - /* Find where we map lowmem from each controller. */ - high_memory = setup_pa_va_mapping(); - - /* Set max_low_pfn based on what node 0 can directly address. */ - max_low_pfn = node_lowmem_end_pfn[0]; - - lowmem_pages = (mappable_physpages > MAXMEM_PFN) ? - MAXMEM_PFN : mappable_physpages; - highmem_pages = (long) (physpages - lowmem_pages); - - pr_notice("%ldMB HIGHMEM available\n", - pages_to_mb(highmem_pages > 0 ? highmem_pages : 0)); - pr_notice("%ldMB LOWMEM available\n", pages_to_mb(lowmem_pages)); -#else - /* Set max_low_pfn based on what node 0 can directly address. */ - max_low_pfn = node_end_pfn[0]; - -#ifndef __tilegx__ - if (node_end_pfn[0] > MAXMEM_PFN) { - pr_warn("Only using %ldMB LOWMEM\n", MAXMEM >> 20); - pr_warn("Use a HIGHMEM enabled kernel\n"); - max_low_pfn = MAXMEM_PFN; - max_pfn = MAXMEM_PFN; - node_end_pfn[0] = MAXMEM_PFN; - } else { - pr_notice("%ldMB memory available\n", - pages_to_mb(node_end_pfn[0])); - } - for (i = 1; i < MAX_NUMNODES; ++i) { - node_start_pfn[i] = 0; - node_end_pfn[i] = 0; - } - high_memory = __va(node_end_pfn[0]); -#else - lowmem_pages = 0; - for (i = 0; i < MAX_NUMNODES; ++i) { - int pages = node_end_pfn[i] - node_start_pfn[i]; - lowmem_pages += pages; - if (pages) - high_memory = pfn_to_kaddr(node_end_pfn[i]); - } - pr_notice("%ldMB memory available\n", pages_to_mb(lowmem_pages)); -#endif -#endif -} - -/* - * On 32-bit machines, we only put bootmem on the low controller, - * since PAs > 4GB can't be used in bootmem. In principle one could - * imagine, e.g., multiple 1 GB controllers all of which could support - * bootmem, but in practice using controllers this small isn't a - * particularly interesting scenario, so we just keep it simple and - * use only the first controller for bootmem on 32-bit machines. - */ -static inline int node_has_bootmem(int nid) -{ -#ifdef CONFIG_64BIT - return 1; -#else - return nid == 0; -#endif -} - -static inline unsigned long alloc_bootmem_pfn(int nid, - unsigned long size, - unsigned long goal) -{ - void *kva = __alloc_bootmem_node(NODE_DATA(nid), size, - PAGE_SIZE, goal); - unsigned long pfn = kaddr_to_pfn(kva); - BUG_ON(goal && PFN_PHYS(pfn) != goal); - return pfn; -} - -static void __init setup_bootmem_allocator_node(int i) -{ - unsigned long start, end, mapsize, mapstart; - - if (node_has_bootmem(i)) { - NODE_DATA(i)->bdata = &bootmem_node_data[i]; - } else { - /* Share controller zero's bdata for now. */ - NODE_DATA(i)->bdata = &bootmem_node_data[0]; - return; - } - - /* Skip up to after the bss in node 0. */ - start = (i == 0) ? min_low_pfn : node_start_pfn[i]; - - /* Only lowmem, if we're a HIGHMEM build. */ -#ifdef CONFIG_HIGHMEM - end = node_lowmem_end_pfn[i]; -#else - end = node_end_pfn[i]; -#endif - - /* No memory here. */ - if (end == start) - return; - - /* Figure out where the bootmem bitmap is located. */ - mapsize = bootmem_bootmap_pages(end - start); - if (i == 0) { - /* Use some space right before the heap on node 0. */ - mapstart = start; - start += mapsize; - } else { - /* Allocate bitmap on node 0 to avoid page table issues. */ - mapstart = alloc_bootmem_pfn(0, PFN_PHYS(mapsize), 0); - } - - /* Initialize a node. */ - init_bootmem_node(NODE_DATA(i), mapstart, start, end); - - /* Free all the space back into the allocator. */ - free_bootmem(PFN_PHYS(start), PFN_PHYS(end - start)); - -#if defined(CONFIG_PCI) && !defined(__tilegx__) - /* - * Throw away any memory aliased by the PCI region. - */ - if (pci_reserve_start_pfn < end && pci_reserve_end_pfn > start) { - start = max(pci_reserve_start_pfn, start); - end = min(pci_reserve_end_pfn, end); - reserve_bootmem(PFN_PHYS(start), PFN_PHYS(end - start), - BOOTMEM_EXCLUSIVE); - } -#endif -} - -static void __init setup_bootmem_allocator(void) -{ - int i; - for (i = 0; i < MAX_NUMNODES; ++i) - setup_bootmem_allocator_node(i); - - /* Reserve any memory excluded by "memmap" arguments. */ - for (i = 0; i < memmap_nr; ++i) { - struct memmap_entry *m = &memmap_map[i]; - reserve_bootmem(m->addr, m->size, BOOTMEM_DEFAULT); - } - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) { - /* Make sure the initrd memory region is not modified. */ - if (reserve_bootmem(initrd_start, initrd_end - initrd_start, - BOOTMEM_EXCLUSIVE)) { - pr_crit("The initrd memory region has been polluted. Disabling it.\n"); - initrd_start = 0; - initrd_end = 0; - } else { - /* - * Translate initrd_start & initrd_end from PA to VA for - * future access. - */ - initrd_start += PAGE_OFFSET; - initrd_end += PAGE_OFFSET; - } - } -#endif - -#ifdef CONFIG_KEXEC - if (crashk_res.start != crashk_res.end) - reserve_bootmem(crashk_res.start, resource_size(&crashk_res), - BOOTMEM_DEFAULT); -#endif -} - -void *__init alloc_remap(int nid, unsigned long size) -{ - int pages = node_end_pfn[nid] - node_start_pfn[nid]; - void *map = pfn_to_kaddr(node_memmap_pfn[nid]); - BUG_ON(size != pages * sizeof(struct page)); - memset(map, 0, size); - return map; -} - -static int __init percpu_size(void) -{ - int size = __per_cpu_end - __per_cpu_start; - size += PERCPU_MODULE_RESERVE; - size += PERCPU_DYNAMIC_EARLY_SIZE; - if (size < PCPU_MIN_UNIT_SIZE) - size = PCPU_MIN_UNIT_SIZE; - size = roundup(size, PAGE_SIZE); - - /* In several places we assume the per-cpu data fits on a huge page. */ - BUG_ON(kdata_huge && size > HPAGE_SIZE); - return size; -} - -static void __init zone_sizes_init(void) -{ - unsigned long zones_size[MAX_NR_ZONES] = { 0 }; - int size = percpu_size(); - int num_cpus = smp_height * smp_width; - const unsigned long dma_end = (1UL << (32 - PAGE_SHIFT)); - - int i; - - for (i = 0; i < num_cpus; ++i) - node_percpu[cpu_to_node(i)] += size; - - for_each_online_node(i) { - unsigned long start = node_start_pfn[i]; - unsigned long end = node_end_pfn[i]; -#ifdef CONFIG_HIGHMEM - unsigned long lowmem_end = node_lowmem_end_pfn[i]; -#else - unsigned long lowmem_end = end; -#endif - int memmap_size = (end - start) * sizeof(struct page); - node_free_pfn[i] = start; - - /* - * Set aside pages for per-cpu data and the mem_map array. - * - * Since the per-cpu data requires special homecaching, - * if we are in kdata_huge mode, we put it at the end of - * the lowmem region. If we're not in kdata_huge mode, - * we take the per-cpu pages from the bottom of the - * controller, since that avoids fragmenting a huge page - * that users might want. We always take the memmap - * from the bottom of the controller, since with - * kdata_huge that lets it be under a huge TLB entry. - * - * If the user has requested isolnodes for a controller, - * though, there'll be no lowmem, so we just alloc_bootmem - * the memmap. There will be no percpu memory either. - */ - if (i != 0 && node_isset(i, isolnodes)) { - node_memmap_pfn[i] = - alloc_bootmem_pfn(0, memmap_size, 0); - BUG_ON(node_percpu[i] != 0); - } else if (node_has_bootmem(start)) { - unsigned long goal = 0; - node_memmap_pfn[i] = - alloc_bootmem_pfn(i, memmap_size, 0); - if (kdata_huge) - goal = PFN_PHYS(lowmem_end) - node_percpu[i]; - if (node_percpu[i]) - node_percpu_pfn[i] = - alloc_bootmem_pfn(i, node_percpu[i], - goal); - } else { - /* In non-bootmem zones, just reserve some pages. */ - node_memmap_pfn[i] = node_free_pfn[i]; - node_free_pfn[i] += PFN_UP(memmap_size); - if (!kdata_huge) { - node_percpu_pfn[i] = node_free_pfn[i]; - node_free_pfn[i] += PFN_UP(node_percpu[i]); - } else { - node_percpu_pfn[i] = - lowmem_end - PFN_UP(node_percpu[i]); - } - } - -#ifdef CONFIG_HIGHMEM - if (start > lowmem_end) { - zones_size[ZONE_NORMAL] = 0; - zones_size[ZONE_HIGHMEM] = end - start; - } else { - zones_size[ZONE_NORMAL] = lowmem_end - start; - zones_size[ZONE_HIGHMEM] = end - lowmem_end; - } -#else - zones_size[ZONE_NORMAL] = end - start; -#endif - - if (start < dma_end) { - zones_size[ZONE_DMA32] = min(zones_size[ZONE_NORMAL], - dma_end - start); - zones_size[ZONE_NORMAL] -= zones_size[ZONE_DMA32]; - } else { - zones_size[ZONE_DMA32] = 0; - } - - /* Take zone metadata from controller 0 if we're isolnode. */ - if (node_isset(i, isolnodes)) - NODE_DATA(i)->bdata = &bootmem_node_data[0]; - - free_area_init_node(i, zones_size, start, NULL); - printk(KERN_DEBUG " Normal zone: %ld per-cpu pages\n", - PFN_UP(node_percpu[i])); - - /* Track the type of memory on each node */ - if (zones_size[ZONE_NORMAL] || zones_size[ZONE_DMA32]) - node_set_state(i, N_NORMAL_MEMORY); -#ifdef CONFIG_HIGHMEM - if (end != start) - node_set_state(i, N_HIGH_MEMORY); -#endif - - node_set_online(i); - } -} - -#ifdef CONFIG_NUMA - -/* which logical CPUs are on which nodes */ -struct cpumask node_2_cpu_mask[MAX_NUMNODES] __ro_after_init; -EXPORT_SYMBOL(node_2_cpu_mask); - -/* which node each logical CPU is on */ -char cpu_2_node[NR_CPUS] __ro_after_init __attribute__((aligned(L2_CACHE_BYTES))); -EXPORT_SYMBOL(cpu_2_node); - -/* Return cpu_to_node() except for cpus not yet assigned, which return -1 */ -static int __init cpu_to_bound_node(int cpu, struct cpumask* unbound_cpus) -{ - if (!cpu_possible(cpu) || cpumask_test_cpu(cpu, unbound_cpus)) - return -1; - else - return cpu_to_node(cpu); -} - -/* Return number of immediately-adjacent tiles sharing the same NUMA node. */ -static int __init node_neighbors(int node, int cpu, - struct cpumask *unbound_cpus) -{ - int neighbors = 0; - int w = smp_width; - int h = smp_height; - int x = cpu % w; - int y = cpu / w; - if (x > 0 && cpu_to_bound_node(cpu-1, unbound_cpus) == node) - ++neighbors; - if (x < w-1 && cpu_to_bound_node(cpu+1, unbound_cpus) == node) - ++neighbors; - if (y > 0 && cpu_to_bound_node(cpu-w, unbound_cpus) == node) - ++neighbors; - if (y < h-1 && cpu_to_bound_node(cpu+w, unbound_cpus) == node) - ++neighbors; - return neighbors; -} - -static void __init setup_numa_mapping(void) -{ - u8 distance[MAX_NUMNODES][NR_CPUS]; - HV_Coord coord; - int cpu, node, cpus, i, x, y; - int num_nodes = num_online_nodes(); - struct cpumask unbound_cpus; - nodemask_t default_nodes; - - cpumask_clear(&unbound_cpus); - - /* Get set of nodes we will use for defaults */ - nodes_andnot(default_nodes, node_online_map, isolnodes); - if (nodes_empty(default_nodes)) { - BUG_ON(!node_isset(0, node_online_map)); - pr_err("Forcing NUMA node zero available as a default node\n"); - node_set(0, default_nodes); - } - - /* Populate the distance[] array */ - memset(distance, -1, sizeof(distance)); - cpu = 0; - for (coord.y = 0; coord.y < smp_height; ++coord.y) { - for (coord.x = 0; coord.x < smp_width; - ++coord.x, ++cpu) { - BUG_ON(cpu >= nr_cpu_ids); - if (!cpu_possible(cpu)) { - cpu_2_node[cpu] = -1; - continue; - } - for_each_node_mask(node, default_nodes) { - HV_MemoryControllerInfo info = - hv_inquire_memory_controller( - coord, node_controller[node]); - distance[node][cpu] = - ABS(info.coord.x) + ABS(info.coord.y); - } - cpumask_set_cpu(cpu, &unbound_cpus); - } - } - cpus = cpu; - - /* - * Round-robin through the NUMA nodes until all the cpus are - * assigned. We could be more clever here (e.g. create four - * sorted linked lists on the same set of cpu nodes, and pull - * off them in round-robin sequence, removing from all four - * lists each time) but given the relatively small numbers - * involved, O(n^2) seem OK for a one-time cost. - */ - node = first_node(default_nodes); - while (!cpumask_empty(&unbound_cpus)) { - int best_cpu = -1; - int best_distance = INT_MAX; - for (cpu = 0; cpu < cpus; ++cpu) { - if (cpumask_test_cpu(cpu, &unbound_cpus)) { - /* - * Compute metric, which is how much - * closer the cpu is to this memory - * controller than the others, shifted - * up, and then the number of - * neighbors already in the node as an - * epsilon adjustment to try to keep - * the nodes compact. - */ - int d = distance[node][cpu] * num_nodes; - for_each_node_mask(i, default_nodes) { - if (i != node) - d -= distance[i][cpu]; - } - d *= 8; /* allow space for epsilon */ - d -= node_neighbors(node, cpu, &unbound_cpus); - if (d < best_distance) { - best_cpu = cpu; - best_distance = d; - } - } - } - BUG_ON(best_cpu < 0); - cpumask_set_cpu(best_cpu, &node_2_cpu_mask[node]); - cpu_2_node[best_cpu] = node; - cpumask_clear_cpu(best_cpu, &unbound_cpus); - node = next_node_in(node, default_nodes); - } - - /* Print out node assignments and set defaults for disabled cpus */ - cpu = 0; - for (y = 0; y < smp_height; ++y) { - printk(KERN_DEBUG "NUMA cpu-to-node row %d:", y); - for (x = 0; x < smp_width; ++x, ++cpu) { - if (cpu_to_node(cpu) < 0) { - pr_cont(" -"); - cpu_2_node[cpu] = first_node(default_nodes); - } else { - pr_cont(" %d", cpu_to_node(cpu)); - } - } - pr_cont("\n"); - } -} - -static struct cpu cpu_devices[NR_CPUS]; - -static int __init topology_init(void) -{ - int i; - - for_each_online_node(i) - register_one_node(i); - - for (i = 0; i < smp_height * smp_width; ++i) - register_cpu(&cpu_devices[i], i); - - return 0; -} - -subsys_initcall(topology_init); - -#else /* !CONFIG_NUMA */ - -#define setup_numa_mapping() do { } while (0) - -#endif /* CONFIG_NUMA */ - -/* - * Initialize hugepage support on this cpu. We do this on all cores - * early in boot: before argument parsing for the boot cpu, and after - * argument parsing but before the init functions run on the secondaries. - * So the values we set up here in the hypervisor may be overridden on - * the boot cpu as arguments are parsed. - */ -static void init_super_pages(void) -{ -#ifdef CONFIG_HUGETLB_SUPER_PAGES - int i; - for (i = 0; i < HUGE_SHIFT_ENTRIES; ++i) - hv_set_pte_super_shift(i, huge_shift[i]); -#endif -} - -/** - * setup_cpu() - Do all necessary per-cpu, tile-specific initialization. - * @boot: Is this the boot cpu? - * - * Called from setup_arch() on the boot cpu, or online_secondary(). - */ -void setup_cpu(int boot) -{ - /* The boot cpu sets up its permanent mappings much earlier. */ - if (!boot) - store_permanent_mappings(); - - /* Allow asynchronous TLB interrupts. */ -#if CHIP_HAS_TILE_DMA() - arch_local_irq_unmask(INT_DMATLB_MISS); - arch_local_irq_unmask(INT_DMATLB_ACCESS); -#endif -#ifdef __tilegx__ - arch_local_irq_unmask(INT_SINGLE_STEP_K); -#endif - - /* - * Allow user access to many generic SPRs, like the cycle - * counter, PASS/FAIL/DONE, INTERRUPT_CRITICAL_SECTION, etc. - */ - __insn_mtspr(SPR_MPL_WORLD_ACCESS_SET_0, 1); - -#if CHIP_HAS_SN() - /* Static network is not restricted. */ - __insn_mtspr(SPR_MPL_SN_ACCESS_SET_0, 1); -#endif - - /* - * Set the MPL for interrupt control 0 & 1 to the corresponding - * values. This includes access to the SYSTEM_SAVE and EX_CONTEXT - * SPRs, as well as the interrupt mask. - */ - __insn_mtspr(SPR_MPL_INTCTRL_0_SET_0, 1); - __insn_mtspr(SPR_MPL_INTCTRL_1_SET_1, 1); - - /* Initialize IRQ support for this cpu. */ - setup_irq_regs(); - -#ifdef CONFIG_HARDWALL - /* Reset the network state on this cpu. */ - reset_network_state(); -#endif - - init_super_pages(); -} - -#ifdef CONFIG_BLK_DEV_INITRD - -static int __initdata set_initramfs_file; -static char __initdata initramfs_file[128] = "initramfs"; - -static int __init setup_initramfs_file(char *str) -{ - if (str == NULL) - return -EINVAL; - strncpy(initramfs_file, str, sizeof(initramfs_file) - 1); - set_initramfs_file = 1; - - return 0; -} -early_param("initramfs_file", setup_initramfs_file); - -/* - * We look for a file called "initramfs" in the hvfs. If there is one, we - * allocate some memory for it and it will be unpacked to the initramfs. - * If it's compressed, the initd code will uncompress it first. - */ -static void __init load_hv_initrd(void) -{ - HV_FS_StatInfo stat; - int fd, rc; - void *initrd; - - /* If initrd has already been set, skip initramfs file in hvfs. */ - if (initrd_start) - return; - - fd = hv_fs_findfile((HV_VirtAddr) initramfs_file); - if (fd == HV_ENOENT) { - if (set_initramfs_file) { - pr_warn("No such hvfs initramfs file '%s'\n", - initramfs_file); - return; - } else { - /* Try old backwards-compatible name. */ - fd = hv_fs_findfile((HV_VirtAddr)"initramfs.cpio.gz"); - if (fd == HV_ENOENT) - return; - } - } - BUG_ON(fd < 0); - stat = hv_fs_fstat(fd); - BUG_ON(stat.size < 0); - if (stat.flags & HV_FS_ISDIR) { - pr_warn("Ignoring hvfs file '%s': it's a directory\n", - initramfs_file); - return; - } - initrd = alloc_bootmem_pages(stat.size); - rc = hv_fs_pread(fd, (HV_VirtAddr) initrd, stat.size, 0); - if (rc != stat.size) { - pr_err("Error reading %d bytes from hvfs file '%s': %d\n", - stat.size, initramfs_file, rc); - free_initrd_mem((unsigned long) initrd, stat.size); - return; - } - initrd_start = (unsigned long) initrd; - initrd_end = initrd_start + stat.size; -} - -void __init free_initrd_mem(unsigned long begin, unsigned long end) -{ - free_bootmem_late(__pa(begin), end - begin); -} - -static int __init setup_initrd(char *str) -{ - char *endp; - unsigned long initrd_size; - - initrd_size = str ? simple_strtoul(str, &endp, 0) : 0; - if (initrd_size == 0 || *endp != '@') - return -EINVAL; - - initrd_start = simple_strtoul(endp+1, &endp, 0); - if (initrd_start == 0) - return -EINVAL; - - initrd_end = initrd_start + initrd_size; - - return 0; -} -early_param("initrd", setup_initrd); - -#else -static inline void load_hv_initrd(void) {} -#endif /* CONFIG_BLK_DEV_INITRD */ - -static void __init validate_hv(void) -{ - /* - * It may already be too late, but let's check our built-in - * configuration against what the hypervisor is providing. - */ - unsigned long glue_size = hv_sysconf(HV_SYSCONF_GLUE_SIZE); - int hv_page_size = hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL); - int hv_hpage_size = hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE); - HV_ASIDRange asid_range; - -#ifndef CONFIG_SMP - HV_Topology topology = hv_inquire_topology(); - BUG_ON(topology.coord.x != 0 || topology.coord.y != 0); - if (topology.width != 1 || topology.height != 1) { - pr_warn("Warning: booting UP kernel on %dx%d grid; will ignore all but first tile\n", - topology.width, topology.height); - } -#endif - - if (PAGE_OFFSET + HV_GLUE_START_CPA + glue_size > (unsigned long)_text) - early_panic("Hypervisor glue size %ld is too big!\n", - glue_size); - if (hv_page_size != PAGE_SIZE) - early_panic("Hypervisor page size %#x != our %#lx\n", - hv_page_size, PAGE_SIZE); - if (hv_hpage_size != HPAGE_SIZE) - early_panic("Hypervisor huge page size %#x != our %#lx\n", - hv_hpage_size, HPAGE_SIZE); - -#ifdef CONFIG_SMP - /* - * Some hypervisor APIs take a pointer to a bitmap array - * whose size is at least the number of cpus on the chip. - * We use a struct cpumask for this, so it must be big enough. - */ - if ((smp_height * smp_width) > nr_cpu_ids) - early_panic("Hypervisor %d x %d grid too big for Linux NR_CPUS %u\n", - smp_height, smp_width, nr_cpu_ids); -#endif - - /* - * Check that we're using allowed ASIDs, and initialize the - * various asid variables to their appropriate initial states. - */ - asid_range = hv_inquire_asid(0); - min_asid = asid_range.start; - __this_cpu_write(current_asid, min_asid); - max_asid = asid_range.start + asid_range.size - 1; - - if (hv_confstr(HV_CONFSTR_CHIP_MODEL, (HV_VirtAddr)chip_model, - sizeof(chip_model)) < 0) { - pr_err("Warning: HV_CONFSTR_CHIP_MODEL not available\n"); - strlcpy(chip_model, "unknown", sizeof(chip_model)); - } -} - -static void __init validate_va(void) -{ -#ifndef __tilegx__ /* FIXME: GX: probably some validation relevant here */ - /* - * Similarly, make sure we're only using allowed VAs. - * We assume we can contiguously use MEM_USER_INTRPT .. MEM_HV_START, - * and 0 .. KERNEL_HIGH_VADDR. - * In addition, make sure we CAN'T use the end of memory, since - * we use the last chunk of each pgd for the pgd_list. - */ - int i, user_kernel_ok = 0; - unsigned long max_va = 0; - unsigned long list_va = - ((PGD_LIST_OFFSET / sizeof(pgd_t)) << PGDIR_SHIFT); - - for (i = 0; ; ++i) { - HV_VirtAddrRange range = hv_inquire_virtual(i); - if (range.size == 0) - break; - if (range.start <= MEM_USER_INTRPT && - range.start + range.size >= MEM_HV_START) - user_kernel_ok = 1; - if (range.start == 0) - max_va = range.size; - BUG_ON(range.start + range.size > list_va); - } - if (!user_kernel_ok) - early_panic("Hypervisor not configured for user/kernel VAs\n"); - if (max_va == 0) - early_panic("Hypervisor not configured for low VAs\n"); - if (max_va < KERNEL_HIGH_VADDR) - early_panic("Hypervisor max VA %#lx smaller than %#lx\n", - max_va, KERNEL_HIGH_VADDR); - - /* Kernel PCs must have their high bit set; see intvec.S. */ - if ((long)VMALLOC_START >= 0) - early_panic("Linux VMALLOC region below the 2GB line (%#lx)!\n" - "Reconfigure the kernel with smaller VMALLOC_RESERVE\n", - VMALLOC_START); -#endif -} - -/* - * cpu_lotar_map lists all the cpus that are valid for the supervisor - * to cache data on at a page level, i.e. what cpus can be placed in - * the LOTAR field of a PTE. It is equivalent to the set of possible - * cpus plus any other cpus that are willing to share their cache. - * It is set by hv_inquire_tiles(HV_INQ_TILES_LOTAR). - */ -struct cpumask __ro_after_init cpu_lotar_map; -EXPORT_SYMBOL(cpu_lotar_map); - -/* - * hash_for_home_map lists all the tiles that hash-for-home data - * will be cached on. Note that this may includes tiles that are not - * valid for this supervisor to use otherwise (e.g. if a hypervisor - * device is being shared between multiple supervisors). - * It is set by hv_inquire_tiles(HV_INQ_TILES_HFH_CACHE). - */ -struct cpumask hash_for_home_map; -EXPORT_SYMBOL(hash_for_home_map); - -/* - * cpu_cacheable_map lists all the cpus whose caches the hypervisor can - * flush on our behalf. It is set to cpu_possible_mask OR'ed with - * hash_for_home_map, and it is what should be passed to - * hv_flush_remote() to flush all caches. Note that if there are - * dedicated hypervisor driver tiles that have authorized use of their - * cache, those tiles will only appear in cpu_lotar_map, NOT in - * cpu_cacheable_map, as they are a special case. - */ -struct cpumask __ro_after_init cpu_cacheable_map; -EXPORT_SYMBOL(cpu_cacheable_map); - -static __initdata struct cpumask disabled_map; - -static int __init disabled_cpus(char *str) -{ - int boot_cpu = smp_processor_id(); - - if (str == NULL || cpulist_parse_crop(str, &disabled_map) != 0) - return -EINVAL; - if (cpumask_test_cpu(boot_cpu, &disabled_map)) { - pr_err("disabled_cpus: can't disable boot cpu %d\n", boot_cpu); - cpumask_clear_cpu(boot_cpu, &disabled_map); - } - return 0; -} - -early_param("disabled_cpus", disabled_cpus); - -void __init print_disabled_cpus(void) -{ - if (!cpumask_empty(&disabled_map)) - pr_info("CPUs not available for Linux: %*pbl\n", - cpumask_pr_args(&disabled_map)); -} - -static void __init setup_cpu_maps(void) -{ - struct cpumask hv_disabled_map, cpu_possible_init; - int boot_cpu = smp_processor_id(); - int cpus, i, rc; - - /* Learn which cpus are allowed by the hypervisor. */ - rc = hv_inquire_tiles(HV_INQ_TILES_AVAIL, - (HV_VirtAddr) cpumask_bits(&cpu_possible_init), - sizeof(cpu_cacheable_map)); - if (rc < 0) - early_panic("hv_inquire_tiles(AVAIL) failed: rc %d\n", rc); - if (!cpumask_test_cpu(boot_cpu, &cpu_possible_init)) - early_panic("Boot CPU %d disabled by hypervisor!\n", boot_cpu); - - /* Compute the cpus disabled by the hvconfig file. */ - cpumask_complement(&hv_disabled_map, &cpu_possible_init); - - /* Include them with the cpus disabled by "disabled_cpus". */ - cpumask_or(&disabled_map, &disabled_map, &hv_disabled_map); - - /* - * Disable every cpu after "setup_max_cpus". But don't mark - * as disabled the cpus that are outside of our initial rectangle, - * since that turns out to be confusing. - */ - cpus = 1; /* this cpu */ - cpumask_set_cpu(boot_cpu, &disabled_map); /* ignore this cpu */ - for (i = 0; cpus < setup_max_cpus; ++i) - if (!cpumask_test_cpu(i, &disabled_map)) - ++cpus; - for (; i < smp_height * smp_width; ++i) - cpumask_set_cpu(i, &disabled_map); - cpumask_clear_cpu(boot_cpu, &disabled_map); /* reset this cpu */ - for (i = smp_height * smp_width; i < NR_CPUS; ++i) - cpumask_clear_cpu(i, &disabled_map); - - /* - * Setup cpu_possible map as every cpu allocated to us, minus - * the results of any "disabled_cpus" settings. - */ - cpumask_andnot(&cpu_possible_init, &cpu_possible_init, &disabled_map); - init_cpu_possible(&cpu_possible_init); - - /* Learn which cpus are valid for LOTAR caching. */ - rc = hv_inquire_tiles(HV_INQ_TILES_LOTAR, - (HV_VirtAddr) cpumask_bits(&cpu_lotar_map), - sizeof(cpu_lotar_map)); - if (rc < 0) { - pr_err("warning: no HV_INQ_TILES_LOTAR; using AVAIL\n"); - cpu_lotar_map = *cpu_possible_mask; - } - - /* Retrieve set of CPUs used for hash-for-home caching */ - rc = hv_inquire_tiles(HV_INQ_TILES_HFH_CACHE, - (HV_VirtAddr) hash_for_home_map.bits, - sizeof(hash_for_home_map)); - if (rc < 0) - early_panic("hv_inquire_tiles(HFH_CACHE) failed: rc %d\n", rc); - cpumask_or(&cpu_cacheable_map, cpu_possible_mask, &hash_for_home_map); -} - - -static int __init dataplane(char *str) -{ - pr_warn("WARNING: dataplane support disabled in this kernel\n"); - return 0; -} - -early_param("dataplane", dataplane); - -#ifdef CONFIG_NO_HZ_FULL -/* Warn if hypervisor shared cpus are marked as nohz_full. */ -static int __init check_nohz_full_cpus(void) -{ - struct cpumask shared; - int cpu; - - if (hv_inquire_tiles(HV_INQ_TILES_SHARED, - (HV_VirtAddr) shared.bits, sizeof(shared)) < 0) { - pr_warn("WARNING: No support for inquiring hv shared tiles\n"); - return 0; - } - for_each_cpu(cpu, &shared) { - if (tick_nohz_full_cpu(cpu)) - pr_warn("WARNING: nohz_full cpu %d receives hypervisor interrupts!\n", - cpu); - } - return 0; -} -arch_initcall(check_nohz_full_cpus); -#endif - -#ifdef CONFIG_CMDLINE_BOOL -static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE; -#endif - -void __init setup_arch(char **cmdline_p) -{ - int len; - -#if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE) - len = hv_get_command_line((HV_VirtAddr) boot_command_line, - COMMAND_LINE_SIZE); - if (boot_command_line[0]) - pr_warn("WARNING: ignoring dynamic command line \"%s\"\n", - boot_command_line); - strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); -#else - char *hv_cmdline; -#if defined(CONFIG_CMDLINE_BOOL) - if (builtin_cmdline[0]) { - int builtin_len = strlcpy(boot_command_line, builtin_cmdline, - COMMAND_LINE_SIZE); - if (builtin_len < COMMAND_LINE_SIZE-1) - boot_command_line[builtin_len++] = ' '; - hv_cmdline = &boot_command_line[builtin_len]; - len = COMMAND_LINE_SIZE - builtin_len; - } else -#endif - { - hv_cmdline = boot_command_line; - len = COMMAND_LINE_SIZE; - } - len = hv_get_command_line((HV_VirtAddr) hv_cmdline, len); - if (len < 0 || len > COMMAND_LINE_SIZE) - early_panic("hv_get_command_line failed: %d\n", len); -#endif - - *cmdline_p = boot_command_line; - - /* Set disabled_map and setup_max_cpus very early */ - parse_early_param(); - - /* Make sure the kernel is compatible with the hypervisor. */ - validate_hv(); - validate_va(); - - setup_cpu_maps(); - - -#if defined(CONFIG_PCI) && !defined(__tilegx__) - /* - * Initialize the PCI structures. This is done before memory - * setup so that we know whether or not a pci_reserve region - * is necessary. - */ - if (tile_pci_init() == 0) - pci_reserve_mb = 0; - - /* PCI systems reserve a region just below 4GB for mapping iomem. */ - pci_reserve_end_pfn = (1 << (32 - PAGE_SHIFT)); - pci_reserve_start_pfn = pci_reserve_end_pfn - - (pci_reserve_mb << (20 - PAGE_SHIFT)); -#endif - - init_mm.start_code = (unsigned long) _text; - init_mm.end_code = (unsigned long) _etext; - init_mm.end_data = (unsigned long) _edata; - init_mm.brk = (unsigned long) _end; - - setup_memory(); - store_permanent_mappings(); - setup_bootmem_allocator(); - - /* - * NOTE: before this point _nobody_ is allowed to allocate - * any memory using the bootmem allocator. - */ - -#ifdef CONFIG_SWIOTLB - swiotlb_init(0); -#endif - - paging_init(); - setup_numa_mapping(); - zone_sizes_init(); - set_page_homes(); - setup_cpu(1); - setup_clock(); - load_hv_initrd(); -} - - -/* - * Set up per-cpu memory. - */ - -unsigned long __per_cpu_offset[NR_CPUS] __ro_after_init; -EXPORT_SYMBOL(__per_cpu_offset); - -static size_t __initdata pfn_offset[MAX_NUMNODES] = { 0 }; -static unsigned long __initdata percpu_pfn[NR_CPUS] = { 0 }; - -/* - * As the percpu code allocates pages, we return the pages from the - * end of the node for the specified cpu. - */ -static void *__init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align) -{ - int nid = cpu_to_node(cpu); - unsigned long pfn = node_percpu_pfn[nid] + pfn_offset[nid]; - - BUG_ON(size % PAGE_SIZE != 0); - pfn_offset[nid] += size / PAGE_SIZE; - BUG_ON(node_percpu[nid] < size); - node_percpu[nid] -= size; - if (percpu_pfn[cpu] == 0) - percpu_pfn[cpu] = pfn; - return pfn_to_kaddr(pfn); -} - -/* - * Pages reserved for percpu memory are not freeable, and in any case we are - * on a short path to panic() in setup_per_cpu_area() at this point anyway. - */ -static void __init pcpu_fc_free(void *ptr, size_t size) -{ -} - -/* - * Set up vmalloc page tables using bootmem for the percpu code. - */ -static void __init pcpu_fc_populate_pte(unsigned long addr) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - - BUG_ON(pgd_addr_invalid(addr)); - if (addr < VMALLOC_START || addr >= VMALLOC_END) - panic("PCPU addr %#lx outside vmalloc range %#lx..%#lx; try increasing CONFIG_VMALLOC_RESERVE\n", - addr, VMALLOC_START, VMALLOC_END); - - pgd = swapper_pg_dir + pgd_index(addr); - pud = pud_offset(pgd, addr); - BUG_ON(!pud_present(*pud)); - pmd = pmd_offset(pud, addr); - if (pmd_present(*pmd)) { - BUG_ON(pmd_huge_page(*pmd)); - } else { - pte = __alloc_bootmem(L2_KERNEL_PGTABLE_SIZE, - HV_PAGE_TABLE_ALIGN, 0); - pmd_populate_kernel(&init_mm, pmd, pte); - } -} - -void __init setup_per_cpu_areas(void) -{ - struct page *pg; - unsigned long delta, pfn, lowmem_va; - unsigned long size = percpu_size(); - char *ptr; - int rc, cpu, i; - - rc = pcpu_page_first_chunk(PERCPU_MODULE_RESERVE, pcpu_fc_alloc, - pcpu_fc_free, pcpu_fc_populate_pte); - if (rc < 0) - panic("Cannot initialize percpu area (err=%d)", rc); - - delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; - for_each_possible_cpu(cpu) { - __per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu]; - - /* finv the copy out of cache so we can change homecache */ - ptr = pcpu_base_addr + pcpu_unit_offsets[cpu]; - __finv_buffer(ptr, size); - pfn = percpu_pfn[cpu]; - - /* Rewrite the page tables to cache on that cpu */ - pg = pfn_to_page(pfn); - for (i = 0; i < size; i += PAGE_SIZE, ++pfn, ++pg) { - - /* Update the vmalloc mapping and page home. */ - unsigned long addr = (unsigned long)ptr + i; - pte_t *ptep = virt_to_kpte(addr); - pte_t pte = *ptep; - BUG_ON(pfn != pte_pfn(pte)); - pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_TILE_L3); - pte = set_remote_cache_cpu(pte, cpu); - set_pte_at(&init_mm, addr, ptep, pte); - - /* Update the lowmem mapping for consistency. */ - lowmem_va = (unsigned long)pfn_to_kaddr(pfn); - ptep = virt_to_kpte(lowmem_va); - if (pte_huge(*ptep)) { - printk(KERN_DEBUG "early shatter of huge page at %#lx\n", - lowmem_va); - shatter_pmd((pmd_t *)ptep); - ptep = virt_to_kpte(lowmem_va); - BUG_ON(pte_huge(*ptep)); - } - BUG_ON(pfn != pte_pfn(*ptep)); - set_pte_at(&init_mm, lowmem_va, ptep, pte); - } - } - - /* Set our thread pointer appropriately. */ - set_my_cpu_offset(__per_cpu_offset[smp_processor_id()]); - - /* Make sure the finv's have completed. */ - mb_incoherent(); - - /* Flush the TLB so we reference it properly from here on out. */ - local_flush_tlb_all(); -} - -static struct resource data_resource = { - .name = "Kernel data", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM -}; - -static struct resource code_resource = { - .name = "Kernel code", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM -}; - -/* - * On Pro, we reserve all resources above 4GB so that PCI won't try to put - * mappings above 4GB. - */ -#if defined(CONFIG_PCI) && !defined(__tilegx__) -static struct resource* __init -insert_non_bus_resource(void) -{ - struct resource *res = - kzalloc(sizeof(struct resource), GFP_ATOMIC); - if (!res) - return NULL; - res->name = "Non-Bus Physical Address Space"; - res->start = (1ULL << 32); - res->end = -1LL; - res->flags = IORESOURCE_BUSY | IORESOURCE_MEM; - if (insert_resource(&iomem_resource, res)) { - kfree(res); - return NULL; - } - return res; -} -#endif - -static struct resource* __init -insert_ram_resource(u64 start_pfn, u64 end_pfn, bool reserved) -{ - struct resource *res = - kzalloc(sizeof(struct resource), GFP_ATOMIC); - if (!res) - return NULL; - res->start = start_pfn << PAGE_SHIFT; - res->end = (end_pfn << PAGE_SHIFT) - 1; - res->flags = IORESOURCE_BUSY | IORESOURCE_MEM; - if (reserved) { - res->name = "Reserved"; - } else { - res->name = "System RAM"; - res->flags |= IORESOURCE_SYSRAM; - } - if (insert_resource(&iomem_resource, res)) { - kfree(res); - return NULL; - } - return res; -} - -/* - * Request address space for all standard resources - * - * If the system includes PCI root complex drivers, we need to create - * a window just below 4GB where PCI BARs can be mapped. - */ -static int __init request_standard_resources(void) -{ - int i; - enum { CODE_DELTA = MEM_SV_START - PAGE_OFFSET }; - -#if defined(CONFIG_PCI) && !defined(__tilegx__) - insert_non_bus_resource(); -#endif - - for_each_online_node(i) { - u64 start_pfn = node_start_pfn[i]; - u64 end_pfn = node_end_pfn[i]; - -#if defined(CONFIG_PCI) && !defined(__tilegx__) - if (start_pfn <= pci_reserve_start_pfn && - end_pfn > pci_reserve_start_pfn) { - if (end_pfn > pci_reserve_end_pfn) - insert_ram_resource(pci_reserve_end_pfn, - end_pfn, 0); - end_pfn = pci_reserve_start_pfn; - } -#endif - insert_ram_resource(start_pfn, end_pfn, 0); - } - - code_resource.start = __pa(_text - CODE_DELTA); - code_resource.end = __pa(_etext - CODE_DELTA)-1; - data_resource.start = __pa(_sdata); - data_resource.end = __pa(_end)-1; - - insert_resource(&iomem_resource, &code_resource); - insert_resource(&iomem_resource, &data_resource); - - /* Mark any "memmap" regions busy for the resource manager. */ - for (i = 0; i < memmap_nr; ++i) { - struct memmap_entry *m = &memmap_map[i]; - insert_ram_resource(PFN_DOWN(m->addr), - PFN_UP(m->addr + m->size - 1), 1); - } - -#ifdef CONFIG_KEXEC - insert_resource(&iomem_resource, &crashk_res); -#endif - - return 0; -} - -subsys_initcall(request_standard_resources); diff --git a/arch/tile/kernel/signal.c b/arch/tile/kernel/signal.c deleted file mode 100644 index f2bf557bb005..000000000000 --- a/arch/tile/kernel/signal.c +++ /dev/null @@ -1,411 +0,0 @@ -/* - * Copyright (C) 1991, 1992 Linus Torvalds - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/sched.h> -#include <linux/sched/debug.h> -#include <linux/sched/task_stack.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/errno.h> -#include <linux/wait.h> -#include <linux/unistd.h> -#include <linux/stddef.h> -#include <linux/personality.h> -#include <linux/suspend.h> -#include <linux/ptrace.h> -#include <linux/elf.h> -#include <linux/compat.h> -#include <linux/syscalls.h> -#include <linux/uaccess.h> -#include <asm/processor.h> -#include <asm/ucontext.h> -#include <asm/sigframe.h> -#include <asm/syscalls.h> -#include <asm/vdso.h> -#include <arch/interrupts.h> - -#define DEBUG_SIG 0 - -/* - * Do a signal return; undo the signal stack. - */ - -int restore_sigcontext(struct pt_regs *regs, - struct sigcontext __user *sc) -{ - int err; - - /* Always make any pending restarted system calls return -EINTR */ - current->restart_block.fn = do_no_restart_syscall; - - /* - * Enforce that sigcontext is like pt_regs, and doesn't mess - * up our stack alignment rules. - */ - BUILD_BUG_ON(sizeof(struct sigcontext) != sizeof(struct pt_regs)); - BUILD_BUG_ON(sizeof(struct sigcontext) % 8 != 0); - err = __copy_from_user(regs, sc, sizeof(*regs)); - - /* Ensure that the PL is always set to USER_PL. */ - regs->ex1 = PL_ICS_EX1(USER_PL, EX1_ICS(regs->ex1)); - - regs->faultnum = INT_SWINT_1_SIGRETURN; - - return err; -} - -void signal_fault(const char *type, struct pt_regs *regs, - void __user *frame, int sig) -{ - trace_unhandled_signal(type, regs, (unsigned long)frame, SIGSEGV); - force_sigsegv(sig, current); -} - -/* The assembly shim for this function arranges to ignore the return value. */ -SYSCALL_DEFINE0(rt_sigreturn) -{ - struct pt_regs *regs = current_pt_regs(); - struct rt_sigframe __user *frame = - (struct rt_sigframe __user *)(regs->sp); - sigset_t set; - - if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) - goto badframe; - if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) - goto badframe; - - set_current_blocked(&set); - - if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) - goto badframe; - - if (restore_altstack(&frame->uc.uc_stack)) - goto badframe; - - return 0; - -badframe: - signal_fault("bad sigreturn frame", regs, frame, 0); - return 0; -} - -/* - * Set up a signal frame. - */ - -int setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs) -{ - return __copy_to_user(sc, regs, sizeof(*regs)); -} - -/* - * Determine which stack to use.. - */ -static inline void __user *get_sigframe(struct k_sigaction *ka, - struct pt_regs *regs, - size_t frame_size) -{ - unsigned long sp; - - /* Default to using normal stack */ - sp = regs->sp; - - /* - * If we are on the alternate signal stack and would overflow - * it, don't. Return an always-bogus address instead so we - * will die with SIGSEGV. - */ - if (on_sig_stack(sp) && !likely(on_sig_stack(sp - frame_size))) - return (void __user __force *)-1UL; - - /* This is the X/Open sanctioned signal stack switching. */ - if (ka->sa.sa_flags & SA_ONSTACK) { - if (sas_ss_flags(sp) == 0) - sp = current->sas_ss_sp + current->sas_ss_size; - } - - sp -= frame_size; - /* - * Align the stack pointer according to the TILE ABI, - * i.e. so that on function entry (sp & 15) == 0. - */ - sp &= -16UL; - return (void __user *) sp; -} - -static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, - struct pt_regs *regs) -{ - unsigned long restorer; - struct rt_sigframe __user *frame; - int err = 0, sig = ksig->sig; - - frame = get_sigframe(&ksig->ka, regs, sizeof(*frame)); - - if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) - goto err; - - /* Always write at least the signal number for the stack backtracer. */ - if (ksig->ka.sa.sa_flags & SA_SIGINFO) { - /* At sigreturn time, restore the callee-save registers too. */ - err |= copy_siginfo_to_user(&frame->info, &ksig->info); - regs->flags |= PT_FLAGS_RESTORE_REGS; - } else { - err |= __put_user(ksig->info.si_signo, &frame->info.si_signo); - } - - /* Create the ucontext. */ - err |= __clear_user(&frame->save_area, sizeof(frame->save_area)); - err |= __put_user(0, &frame->uc.uc_flags); - err |= __put_user(NULL, &frame->uc.uc_link); - err |= __save_altstack(&frame->uc.uc_stack, regs->sp); - err |= setup_sigcontext(&frame->uc.uc_mcontext, regs); - err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); - if (err) - goto err; - - restorer = VDSO_SYM(&__vdso_rt_sigreturn); - if (ksig->ka.sa.sa_flags & SA_RESTORER) - restorer = (unsigned long) ksig->ka.sa.sa_restorer; - - /* - * Set up registers for signal handler. - * Registers that we don't modify keep the value they had from - * user-space at the time we took the signal. - * We always pass siginfo and mcontext, regardless of SA_SIGINFO, - * since some things rely on this (e.g. glibc's debug/segfault.c). - */ - regs->pc = (unsigned long) ksig->ka.sa.sa_handler; - regs->ex1 = PL_ICS_EX1(USER_PL, 1); /* set crit sec in handler */ - regs->sp = (unsigned long) frame; - regs->lr = restorer; - regs->regs[0] = (unsigned long) sig; - regs->regs[1] = (unsigned long) &frame->info; - regs->regs[2] = (unsigned long) &frame->uc; - regs->flags |= PT_FLAGS_CALLER_SAVES; - return 0; - -err: - trace_unhandled_signal("bad sigreturn frame", regs, - (unsigned long)frame, SIGSEGV); - return -EFAULT; -} - -/* - * OK, we're invoking a handler - */ - -static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) -{ - sigset_t *oldset = sigmask_to_save(); - int ret; - - /* Are we from a system call? */ - if (regs->faultnum == INT_SWINT_1) { - /* If so, check system call restarting.. */ - switch (regs->regs[0]) { - case -ERESTART_RESTARTBLOCK: - case -ERESTARTNOHAND: - regs->regs[0] = -EINTR; - break; - - case -ERESTARTSYS: - if (!(ksig->ka.sa.sa_flags & SA_RESTART)) { - regs->regs[0] = -EINTR; - break; - } - /* fallthrough */ - case -ERESTARTNOINTR: - /* Reload caller-saves to restore r0..r5 and r10. */ - regs->flags |= PT_FLAGS_CALLER_SAVES; - regs->regs[0] = regs->orig_r0; - regs->pc -= 8; - } - } - - /* Set up the stack frame */ -#ifdef CONFIG_COMPAT - if (is_compat_task()) - ret = compat_setup_rt_frame(ksig, oldset, regs); - else -#endif - ret = setup_rt_frame(ksig, oldset, regs); - - signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP)); -} - -/* - * Note that 'init' is a special process: it doesn't get signals it doesn't - * want to handle. Thus you cannot kill init even with a SIGKILL even by - * mistake. - */ -void do_signal(struct pt_regs *regs) -{ - struct ksignal ksig; - - /* - * i386 will check if we're coming from kernel mode and bail out - * here. In my experience this just turns weird crashes into - * weird spin-hangs. But if we find a case where this seems - * helpful, we can reinstate the check on "!user_mode(regs)". - */ - - if (get_signal(&ksig)) { - /* Whee! Actually deliver the signal. */ - handle_signal(&ksig, regs); - goto done; - } - - /* Did we come from a system call? */ - if (regs->faultnum == INT_SWINT_1) { - /* Restart the system call - no handlers present */ - switch (regs->regs[0]) { - case -ERESTARTNOHAND: - case -ERESTARTSYS: - case -ERESTARTNOINTR: - regs->flags |= PT_FLAGS_CALLER_SAVES; - regs->regs[0] = regs->orig_r0; - regs->pc -= 8; - break; - - case -ERESTART_RESTARTBLOCK: - regs->flags |= PT_FLAGS_CALLER_SAVES; - regs->regs[TREG_SYSCALL_NR] = __NR_restart_syscall; - regs->pc -= 8; - break; - } - } - - /* If there's no signal to deliver, just put the saved sigmask back. */ - restore_saved_sigmask(); - -done: - /* Avoid double syscall restart if there are nested signals. */ - regs->faultnum = INT_SWINT_1_SIGRETURN; -} - -int show_unhandled_signals = 1; - -static int __init crashinfo(char *str) -{ - const char *word; - - if (*str == '\0') - show_unhandled_signals = 2; - else if (*str != '=' || kstrtoint(++str, 0, &show_unhandled_signals) != 0) - return 0; - - switch (show_unhandled_signals) { - case 0: - word = "No"; - break; - case 1: - word = "One-line"; - break; - default: - word = "Detailed"; - break; - } - pr_info("%s crash reports will be generated on the console\n", word); - return 1; -} -__setup("crashinfo", crashinfo); - -static void dump_mem(void __user *address) -{ - void __user *addr; - enum { region_size = 256, bytes_per_line = 16 }; - int i, j, k; - int found_readable_mem = 0; - - if (!access_ok(VERIFY_READ, address, 1)) { - pr_err("Not dumping at address 0x%lx (kernel address)\n", - (unsigned long)address); - return; - } - - addr = (void __user *) - (((unsigned long)address & -bytes_per_line) - region_size/2); - if (addr > address) - addr = NULL; - for (i = 0; i < region_size; - addr += bytes_per_line, i += bytes_per_line) { - unsigned char buf[bytes_per_line]; - char line[100]; - if (copy_from_user(buf, addr, bytes_per_line)) - continue; - if (!found_readable_mem) { - pr_err("Dumping memory around address 0x%lx:\n", - (unsigned long)address); - found_readable_mem = 1; - } - j = sprintf(line, REGFMT ":", (unsigned long)addr); - for (k = 0; k < bytes_per_line; ++k) - j += sprintf(&line[j], " %02x", buf[k]); - pr_err("%s\n", line); - } - if (!found_readable_mem) - pr_err("No readable memory around address 0x%lx\n", - (unsigned long)address); -} - -void trace_unhandled_signal(const char *type, struct pt_regs *regs, - unsigned long address, int sig) -{ - struct task_struct *tsk = current; - - if (show_unhandled_signals == 0) - return; - - /* If the signal is handled, don't show it here. */ - if (!is_global_init(tsk)) { - void __user *handler = - tsk->sighand->action[sig-1].sa.sa_handler; - if (handler != SIG_IGN && handler != SIG_DFL) - return; - } - - /* Rate-limit the one-line output, not the detailed output. */ - if (show_unhandled_signals <= 1 && !printk_ratelimit()) - return; - - printk("%s%s[%d]: %s at %lx pc "REGFMT" signal %d", - task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG, - tsk->comm, task_pid_nr(tsk), type, address, regs->pc, sig); - - print_vma_addr(KERN_CONT " in ", regs->pc); - - printk(KERN_CONT "\n"); - - if (show_unhandled_signals > 1) { - switch (sig) { - case SIGILL: - case SIGFPE: - case SIGSEGV: - case SIGBUS: - pr_err("User crash: signal %d, trap %ld, address 0x%lx\n", - sig, regs->faultnum, address); - show_regs(regs); - dump_mem((void __user *)address); - break; - default: - pr_err("User crash: signal %d, trap %ld\n", - sig, regs->faultnum); - break; - } - } -} diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c deleted file mode 100644 index 479d8033a801..000000000000 --- a/arch/tile/kernel/single_step.c +++ /dev/null @@ -1,786 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * A code-rewriter that enables instruction single-stepping. - */ - -#include <linux/smp.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/thread_info.h> -#include <linux/uaccess.h> -#include <linux/mman.h> -#include <linux/types.h> -#include <linux/err.h> -#include <linux/prctl.h> -#include <asm/cacheflush.h> -#include <asm/traps.h> -#include <linux/uaccess.h> -#include <asm/unaligned.h> -#include <arch/abi.h> -#include <arch/spr_def.h> -#include <arch/opcode.h> - - -#ifndef __tilegx__ /* Hardware support for single step unavailable. */ - -#define signExtend17(val) sign_extend((val), 17) -#define TILE_X1_MASK (0xffffffffULL << 31) - -enum mem_op { - MEMOP_NONE, - MEMOP_LOAD, - MEMOP_STORE, - MEMOP_LOAD_POSTINCR, - MEMOP_STORE_POSTINCR -}; - -static inline tilepro_bundle_bits set_BrOff_X1(tilepro_bundle_bits n, - s32 offset) -{ - tilepro_bundle_bits result; - - /* mask out the old offset */ - tilepro_bundle_bits mask = create_BrOff_X1(-1); - result = n & (~mask); - - /* or in the new offset */ - result |= create_BrOff_X1(offset); - - return result; -} - -static inline tilepro_bundle_bits move_X1(tilepro_bundle_bits n, int dest, - int src) -{ - tilepro_bundle_bits result; - tilepro_bundle_bits op; - - result = n & (~TILE_X1_MASK); - - op = create_Opcode_X1(SPECIAL_0_OPCODE_X1) | - create_RRROpcodeExtension_X1(OR_SPECIAL_0_OPCODE_X1) | - create_Dest_X1(dest) | - create_SrcB_X1(TREG_ZERO) | - create_SrcA_X1(src) ; - - result |= op; - return result; -} - -static inline tilepro_bundle_bits nop_X1(tilepro_bundle_bits n) -{ - return move_X1(n, TREG_ZERO, TREG_ZERO); -} - -static inline tilepro_bundle_bits addi_X1( - tilepro_bundle_bits n, int dest, int src, int imm) -{ - n &= ~TILE_X1_MASK; - - n |= (create_SrcA_X1(src) | - create_Dest_X1(dest) | - create_Imm8_X1(imm) | - create_S_X1(0) | - create_Opcode_X1(IMM_0_OPCODE_X1) | - create_ImmOpcodeExtension_X1(ADDI_IMM_0_OPCODE_X1)); - - return n; -} - -static tilepro_bundle_bits rewrite_load_store_unaligned( - struct single_step_state *state, - tilepro_bundle_bits bundle, - struct pt_regs *regs, - enum mem_op mem_op, - int size, int sign_ext) -{ - unsigned char __user *addr; - int val_reg, addr_reg, err, val; - int align_ctl; - - align_ctl = unaligned_fixup; - switch (task_thread_info(current)->align_ctl) { - case PR_UNALIGN_NOPRINT: - align_ctl = 1; - break; - case PR_UNALIGN_SIGBUS: - align_ctl = 0; - break; - } - - /* Get address and value registers */ - if (bundle & TILEPRO_BUNDLE_Y_ENCODING_MASK) { - addr_reg = get_SrcA_Y2(bundle); - val_reg = get_SrcBDest_Y2(bundle); - } else if (mem_op == MEMOP_LOAD || mem_op == MEMOP_LOAD_POSTINCR) { - addr_reg = get_SrcA_X1(bundle); - val_reg = get_Dest_X1(bundle); - } else { - addr_reg = get_SrcA_X1(bundle); - val_reg = get_SrcB_X1(bundle); - } - - /* - * If registers are not GPRs, don't try to handle it. - * - * FIXME: we could handle non-GPR loads by getting the real value - * from memory, writing it to the single step buffer, using a - * temp_reg to hold a pointer to that memory, then executing that - * instruction and resetting temp_reg. For non-GPR stores, it's a - * little trickier; we could use the single step buffer for that - * too, but we'd have to add some more state bits so that we could - * call back in here to copy that value to the real target. For - * now, we just handle the simple case. - */ - if ((val_reg >= PTREGS_NR_GPRS && - (val_reg != TREG_ZERO || - mem_op == MEMOP_LOAD || - mem_op == MEMOP_LOAD_POSTINCR)) || - addr_reg >= PTREGS_NR_GPRS) - return bundle; - - /* If it's aligned, don't handle it specially */ - addr = (void __user *)regs->regs[addr_reg]; - if (((unsigned long)addr % size) == 0) - return bundle; - - /* - * Return SIGBUS with the unaligned address, if requested. - * Note that we return SIGBUS even for completely invalid addresses - * as long as they are in fact unaligned; this matches what the - * tilepro hardware would be doing, if it could provide us with the - * actual bad address in an SPR, which it doesn't. - */ - if (align_ctl == 0) { - siginfo_t info; - - clear_siginfo(&info); - info.si_signo = SIGBUS; - info.si_code = BUS_ADRALN; - info.si_addr = addr; - - trace_unhandled_signal("unaligned trap", regs, - (unsigned long)addr, SIGBUS); - force_sig_info(info.si_signo, &info, current); - return (tilepro_bundle_bits) 0; - } - - /* Handle unaligned load/store */ - if (mem_op == MEMOP_LOAD || mem_op == MEMOP_LOAD_POSTINCR) { - unsigned short val_16; - switch (size) { - case 2: - err = copy_from_user(&val_16, addr, sizeof(val_16)); - val = sign_ext ? ((short)val_16) : val_16; - break; - case 4: - err = copy_from_user(&val, addr, sizeof(val)); - break; - default: - BUG(); - } - if (err == 0) { - state->update_reg = val_reg; - state->update_value = val; - state->update = 1; - } - } else { - unsigned short val_16; - val = (val_reg == TREG_ZERO) ? 0 : regs->regs[val_reg]; - switch (size) { - case 2: - val_16 = val; - err = copy_to_user(addr, &val_16, sizeof(val_16)); - break; - case 4: - err = copy_to_user(addr, &val, sizeof(val)); - break; - default: - BUG(); - } - } - - if (err) { - siginfo_t info; - - clear_siginfo(&info); - info.si_signo = SIGBUS; - info.si_code = BUS_ADRALN; - info.si_addr = addr; - - trace_unhandled_signal("bad address for unaligned fixup", regs, - (unsigned long)addr, SIGBUS); - force_sig_info(info.si_signo, &info, current); - return (tilepro_bundle_bits) 0; - } - - if (unaligned_printk || unaligned_fixup_count == 0) { - pr_info("Process %d/%s: PC %#lx: Fixup of unaligned %s at %#lx\n", - current->pid, current->comm, regs->pc, - mem_op == MEMOP_LOAD || mem_op == MEMOP_LOAD_POSTINCR ? - "load" : "store", - (unsigned long)addr); - if (!unaligned_printk) { -#define P pr_info -P("\n"); -P("Unaligned fixups in the kernel will slow your application considerably.\n"); -P("To find them, write a \"1\" to /proc/sys/tile/unaligned_fixup/printk,\n"); -P("which requests the kernel show all unaligned fixups, or write a \"0\"\n"); -P("to /proc/sys/tile/unaligned_fixup/enabled, in which case each unaligned\n"); -P("access will become a SIGBUS you can debug. No further warnings will be\n"); -P("shown so as to avoid additional slowdown, but you can track the number\n"); -P("of fixups performed via /proc/sys/tile/unaligned_fixup/count.\n"); -P("Use the tile-addr2line command (see \"info addr2line\") to decode PCs.\n"); -P("\n"); -#undef P - } - } - ++unaligned_fixup_count; - - if (bundle & TILEPRO_BUNDLE_Y_ENCODING_MASK) { - /* Convert the Y2 instruction to a prefetch. */ - bundle &= ~(create_SrcBDest_Y2(-1) | - create_Opcode_Y2(-1)); - bundle |= (create_SrcBDest_Y2(TREG_ZERO) | - create_Opcode_Y2(LW_OPCODE_Y2)); - /* Replace the load postincr with an addi */ - } else if (mem_op == MEMOP_LOAD_POSTINCR) { - bundle = addi_X1(bundle, addr_reg, addr_reg, - get_Imm8_X1(bundle)); - /* Replace the store postincr with an addi */ - } else if (mem_op == MEMOP_STORE_POSTINCR) { - bundle = addi_X1(bundle, addr_reg, addr_reg, - get_Dest_Imm8_X1(bundle)); - } else { - /* Convert the X1 instruction to a nop. */ - bundle &= ~(create_Opcode_X1(-1) | - create_UnShOpcodeExtension_X1(-1) | - create_UnOpcodeExtension_X1(-1)); - bundle |= (create_Opcode_X1(SHUN_0_OPCODE_X1) | - create_UnShOpcodeExtension_X1( - UN_0_SHUN_0_OPCODE_X1) | - create_UnOpcodeExtension_X1( - NOP_UN_0_SHUN_0_OPCODE_X1)); - } - - return bundle; -} - -/* - * Called after execve() has started the new image. This allows us - * to reset the info state. Note that the the mmap'ed memory, if there - * was any, has already been unmapped by the exec. - */ -void single_step_execve(void) -{ - struct thread_info *ti = current_thread_info(); - kfree(ti->step_state); - ti->step_state = NULL; -} - -/* - * single_step_once() - entry point when single stepping has been triggered. - * @regs: The machine register state - * - * When we arrive at this routine via a trampoline, the single step - * engine copies the executing bundle to the single step buffer. - * If the instruction is a condition branch, then the target is - * reset to one past the next instruction. If the instruction - * sets the lr, then that is noted. If the instruction is a jump - * or call, then the new target pc is preserved and the current - * bundle instruction set to null. - * - * The necessary post-single-step rewriting information is stored in - * single_step_state-> We use data segment values because the - * stack will be rewound when we run the rewritten single-stepped - * instruction. - */ -void single_step_once(struct pt_regs *regs) -{ - extern tilepro_bundle_bits __single_step_ill_insn; - extern tilepro_bundle_bits __single_step_j_insn; - extern tilepro_bundle_bits __single_step_addli_insn; - extern tilepro_bundle_bits __single_step_auli_insn; - struct thread_info *info = (void *)current_thread_info(); - struct single_step_state *state = info->step_state; - int is_single_step = test_ti_thread_flag(info, TIF_SINGLESTEP); - tilepro_bundle_bits __user *buffer, *pc; - tilepro_bundle_bits bundle; - int temp_reg; - int target_reg = TREG_LR; - int err; - enum mem_op mem_op = MEMOP_NONE; - int size = 0, sign_ext = 0; /* happy compiler */ - int align_ctl; - - align_ctl = unaligned_fixup; - switch (task_thread_info(current)->align_ctl) { - case PR_UNALIGN_NOPRINT: - align_ctl = 1; - break; - case PR_UNALIGN_SIGBUS: - align_ctl = 0; - break; - } - - asm( -" .pushsection .rodata.single_step\n" -" .align 8\n" -" .globl __single_step_ill_insn\n" -"__single_step_ill_insn:\n" -" ill\n" -" .globl __single_step_addli_insn\n" -"__single_step_addli_insn:\n" -" { nop; addli r0, zero, 0 }\n" -" .globl __single_step_auli_insn\n" -"__single_step_auli_insn:\n" -" { nop; auli r0, r0, 0 }\n" -" .globl __single_step_j_insn\n" -"__single_step_j_insn:\n" -" j .\n" -" .popsection\n" - ); - - /* - * Enable interrupts here to allow touching userspace and the like. - * The callers expect this: do_trap() already has interrupts - * enabled, and do_work_pending() handles functions that enable - * interrupts internally. - */ - local_irq_enable(); - - if (state == NULL) { - /* allocate a page of writable, executable memory */ - state = kmalloc(sizeof(struct single_step_state), GFP_KERNEL); - if (state == NULL) { - pr_err("Out of kernel memory trying to single-step\n"); - return; - } - - /* allocate a cache line of writable, executable memory */ - buffer = (void __user *) vm_mmap(NULL, 0, 64, - PROT_EXEC | PROT_READ | PROT_WRITE, - MAP_PRIVATE | MAP_ANONYMOUS, - 0); - - if (IS_ERR((void __force *)buffer)) { - kfree(state); - pr_err("Out of kernel pages trying to single-step\n"); - return; - } - - state->buffer = buffer; - state->is_enabled = 0; - - info->step_state = state; - - /* Validate our stored instruction patterns */ - BUG_ON(get_Opcode_X1(__single_step_addli_insn) != - ADDLI_OPCODE_X1); - BUG_ON(get_Opcode_X1(__single_step_auli_insn) != - AULI_OPCODE_X1); - BUG_ON(get_SrcA_X1(__single_step_addli_insn) != TREG_ZERO); - BUG_ON(get_Dest_X1(__single_step_addli_insn) != 0); - BUG_ON(get_JOffLong_X1(__single_step_j_insn) != 0); - } - - /* - * If we are returning from a syscall, we still haven't hit the - * "ill" for the swint1 instruction. So back the PC up to be - * pointing at the swint1, but we'll actually return directly - * back to the "ill" so we come back in via SIGILL as if we - * had "executed" the swint1 without ever being in kernel space. - */ - if (regs->faultnum == INT_SWINT_1) - regs->pc -= 8; - - pc = (tilepro_bundle_bits __user *)(regs->pc); - if (get_user(bundle, pc) != 0) { - pr_err("Couldn't read instruction at %p trying to step\n", pc); - return; - } - - /* We'll follow the instruction with 2 ill op bundles */ - state->orig_pc = (unsigned long)pc; - state->next_pc = (unsigned long)(pc + 1); - state->branch_next_pc = 0; - state->update = 0; - - if (!(bundle & TILEPRO_BUNDLE_Y_ENCODING_MASK)) { - /* two wide, check for control flow */ - int opcode = get_Opcode_X1(bundle); - - switch (opcode) { - /* branches */ - case BRANCH_OPCODE_X1: - { - s32 offset = signExtend17(get_BrOff_X1(bundle)); - - /* - * For branches, we use a rewriting trick to let the - * hardware evaluate whether the branch is taken or - * untaken. We record the target offset and then - * rewrite the branch instruction to target 1 insn - * ahead if the branch is taken. We then follow the - * rewritten branch with two bundles, each containing - * an "ill" instruction. The supervisor examines the - * pc after the single step code is executed, and if - * the pc is the first ill instruction, then the - * branch (if any) was not taken. If the pc is the - * second ill instruction, then the branch was - * taken. The new pc is computed for these cases, and - * inserted into the registers for the thread. If - * the pc is the start of the single step code, then - * an exception or interrupt was taken before the - * code started processing, and the same "original" - * pc is restored. This change, different from the - * original implementation, has the advantage of - * executing a single user instruction. - */ - state->branch_next_pc = (unsigned long)(pc + offset); - - /* rewrite branch offset to go forward one bundle */ - bundle = set_BrOff_X1(bundle, 2); - } - break; - - /* jumps */ - case JALB_OPCODE_X1: - case JALF_OPCODE_X1: - state->update = 1; - state->next_pc = - (unsigned long) (pc + get_JOffLong_X1(bundle)); - break; - - case JB_OPCODE_X1: - case JF_OPCODE_X1: - state->next_pc = - (unsigned long) (pc + get_JOffLong_X1(bundle)); - bundle = nop_X1(bundle); - break; - - case SPECIAL_0_OPCODE_X1: - switch (get_RRROpcodeExtension_X1(bundle)) { - /* jump-register */ - case JALRP_SPECIAL_0_OPCODE_X1: - case JALR_SPECIAL_0_OPCODE_X1: - state->update = 1; - state->next_pc = - regs->regs[get_SrcA_X1(bundle)]; - break; - - case JRP_SPECIAL_0_OPCODE_X1: - case JR_SPECIAL_0_OPCODE_X1: - state->next_pc = - regs->regs[get_SrcA_X1(bundle)]; - bundle = nop_X1(bundle); - break; - - case LNK_SPECIAL_0_OPCODE_X1: - state->update = 1; - target_reg = get_Dest_X1(bundle); - break; - - /* stores */ - case SH_SPECIAL_0_OPCODE_X1: - mem_op = MEMOP_STORE; - size = 2; - break; - - case SW_SPECIAL_0_OPCODE_X1: - mem_op = MEMOP_STORE; - size = 4; - break; - } - break; - - /* loads and iret */ - case SHUN_0_OPCODE_X1: - if (get_UnShOpcodeExtension_X1(bundle) == - UN_0_SHUN_0_OPCODE_X1) { - switch (get_UnOpcodeExtension_X1(bundle)) { - case LH_UN_0_SHUN_0_OPCODE_X1: - mem_op = MEMOP_LOAD; - size = 2; - sign_ext = 1; - break; - - case LH_U_UN_0_SHUN_0_OPCODE_X1: - mem_op = MEMOP_LOAD; - size = 2; - sign_ext = 0; - break; - - case LW_UN_0_SHUN_0_OPCODE_X1: - mem_op = MEMOP_LOAD; - size = 4; - break; - - case IRET_UN_0_SHUN_0_OPCODE_X1: - { - unsigned long ex0_0 = __insn_mfspr( - SPR_EX_CONTEXT_0_0); - unsigned long ex0_1 = __insn_mfspr( - SPR_EX_CONTEXT_0_1); - /* - * Special-case it if we're iret'ing - * to PL0 again. Otherwise just let - * it run and it will generate SIGILL. - */ - if (EX1_PL(ex0_1) == USER_PL) { - state->next_pc = ex0_0; - regs->ex1 = ex0_1; - bundle = nop_X1(bundle); - } - } - } - } - break; - - /* postincrement operations */ - case IMM_0_OPCODE_X1: - switch (get_ImmOpcodeExtension_X1(bundle)) { - case LWADD_IMM_0_OPCODE_X1: - mem_op = MEMOP_LOAD_POSTINCR; - size = 4; - break; - - case LHADD_IMM_0_OPCODE_X1: - mem_op = MEMOP_LOAD_POSTINCR; - size = 2; - sign_ext = 1; - break; - - case LHADD_U_IMM_0_OPCODE_X1: - mem_op = MEMOP_LOAD_POSTINCR; - size = 2; - sign_ext = 0; - break; - - case SWADD_IMM_0_OPCODE_X1: - mem_op = MEMOP_STORE_POSTINCR; - size = 4; - break; - - case SHADD_IMM_0_OPCODE_X1: - mem_op = MEMOP_STORE_POSTINCR; - size = 2; - break; - - default: - break; - } - break; - } - - if (state->update) { - /* - * Get an available register. We start with a - * bitmask with 1's for available registers. - * We truncate to the low 32 registers since - * we are guaranteed to have set bits in the - * low 32 bits, then use ctz to pick the first. - */ - u32 mask = (u32) ~((1ULL << get_Dest_X0(bundle)) | - (1ULL << get_SrcA_X0(bundle)) | - (1ULL << get_SrcB_X0(bundle)) | - (1ULL << target_reg)); - temp_reg = __builtin_ctz(mask); - state->update_reg = temp_reg; - state->update_value = regs->regs[temp_reg]; - regs->regs[temp_reg] = (unsigned long) (pc+1); - regs->flags |= PT_FLAGS_RESTORE_REGS; - bundle = move_X1(bundle, target_reg, temp_reg); - } - } else { - int opcode = get_Opcode_Y2(bundle); - - switch (opcode) { - /* loads */ - case LH_OPCODE_Y2: - mem_op = MEMOP_LOAD; - size = 2; - sign_ext = 1; - break; - - case LH_U_OPCODE_Y2: - mem_op = MEMOP_LOAD; - size = 2; - sign_ext = 0; - break; - - case LW_OPCODE_Y2: - mem_op = MEMOP_LOAD; - size = 4; - break; - - /* stores */ - case SH_OPCODE_Y2: - mem_op = MEMOP_STORE; - size = 2; - break; - - case SW_OPCODE_Y2: - mem_op = MEMOP_STORE; - size = 4; - break; - } - } - - /* - * Check if we need to rewrite an unaligned load/store. - * Returning zero is a special value meaning we generated a signal. - */ - if (mem_op != MEMOP_NONE && align_ctl >= 0) { - bundle = rewrite_load_store_unaligned(state, bundle, regs, - mem_op, size, sign_ext); - if (bundle == 0) - return; - } - - /* write the bundle to our execution area */ - buffer = state->buffer; - err = __put_user(bundle, buffer++); - - /* - * If we're really single-stepping, we take an INT_ILL after. - * If we're just handling an unaligned access, we can just - * jump directly back to where we were in user code. - */ - if (is_single_step) { - err |= __put_user(__single_step_ill_insn, buffer++); - err |= __put_user(__single_step_ill_insn, buffer++); - } else { - long delta; - - if (state->update) { - /* We have some state to update; do it inline */ - int ha16; - bundle = __single_step_addli_insn; - bundle |= create_Dest_X1(state->update_reg); - bundle |= create_Imm16_X1(state->update_value); - err |= __put_user(bundle, buffer++); - bundle = __single_step_auli_insn; - bundle |= create_Dest_X1(state->update_reg); - bundle |= create_SrcA_X1(state->update_reg); - ha16 = (state->update_value + 0x8000) >> 16; - bundle |= create_Imm16_X1(ha16); - err |= __put_user(bundle, buffer++); - state->update = 0; - } - - /* End with a jump back to the next instruction */ - delta = ((regs->pc + TILEPRO_BUNDLE_SIZE_IN_BYTES) - - (unsigned long)buffer) >> - TILEPRO_LOG2_BUNDLE_ALIGNMENT_IN_BYTES; - bundle = __single_step_j_insn; - bundle |= create_JOffLong_X1(delta); - err |= __put_user(bundle, buffer++); - } - - if (err) { - pr_err("Fault when writing to single-step buffer\n"); - return; - } - - /* - * Flush the buffer. - * We do a local flush only, since this is a thread-specific buffer. - */ - __flush_icache_range((unsigned long)state->buffer, - (unsigned long)buffer); - - /* Indicate enabled */ - state->is_enabled = is_single_step; - regs->pc = (unsigned long)state->buffer; - - /* Fault immediately if we are coming back from a syscall. */ - if (regs->faultnum == INT_SWINT_1) - regs->pc += 8; -} - -#else - -static DEFINE_PER_CPU(unsigned long, ss_saved_pc); - - -/* - * Called directly on the occasion of an interrupt. - * - * If the process doesn't have single step set, then we use this as an - * opportunity to turn single step off. - * - * It has been mentioned that we could conditionally turn off single stepping - * on each entry into the kernel and rely on single_step_once to turn it - * on for the processes that matter (as we already do), but this - * implementation is somewhat more efficient in that we muck with registers - * once on a bum interrupt rather than on every entry into the kernel. - * - * If SINGLE_STEP_CONTROL_K has CANCELED set, then an interrupt occurred, - * so we have to run through this process again before we can say that an - * instruction has executed. - * - * swint will set CANCELED, but it's a legitimate instruction. Fortunately - * it changes the PC. If it hasn't changed, then we know that the interrupt - * wasn't generated by swint and we'll need to run this process again before - * we can say an instruction has executed. - * - * If either CANCELED == 0 or the PC's changed, we send out SIGTRAPs and get - * on with our lives. - */ - -void gx_singlestep_handle(struct pt_regs *regs, int fault_num) -{ - unsigned long *ss_pc = this_cpu_ptr(&ss_saved_pc); - struct thread_info *info = (void *)current_thread_info(); - int is_single_step = test_ti_thread_flag(info, TIF_SINGLESTEP); - unsigned long control = __insn_mfspr(SPR_SINGLE_STEP_CONTROL_K); - - if (is_single_step == 0) { - __insn_mtspr(SPR_SINGLE_STEP_EN_K_K, 0); - - } else if ((*ss_pc != regs->pc) || - (!(control & SPR_SINGLE_STEP_CONTROL_1__CANCELED_MASK))) { - - control |= SPR_SINGLE_STEP_CONTROL_1__CANCELED_MASK; - control |= SPR_SINGLE_STEP_CONTROL_1__INHIBIT_MASK; - __insn_mtspr(SPR_SINGLE_STEP_CONTROL_K, control); - send_sigtrap(current, regs); - } -} - - -/* - * Called from need_singlestep. Set up the control registers and the enable - * register, then return back. - */ - -void single_step_once(struct pt_regs *regs) -{ - unsigned long *ss_pc = this_cpu_ptr(&ss_saved_pc); - unsigned long control = __insn_mfspr(SPR_SINGLE_STEP_CONTROL_K); - - *ss_pc = regs->pc; - control |= SPR_SINGLE_STEP_CONTROL_1__CANCELED_MASK; - control |= SPR_SINGLE_STEP_CONTROL_1__INHIBIT_MASK; - __insn_mtspr(SPR_SINGLE_STEP_CONTROL_K, control); - __insn_mtspr(SPR_SINGLE_STEP_EN_K_K, 1 << USER_PL); -} - -void single_step_execve(void) -{ - /* Nothing */ -} - -#endif /* !__tilegx__ */ diff --git a/arch/tile/kernel/smp.c b/arch/tile/kernel/smp.c deleted file mode 100644 index 94a62e1197ce..000000000000 --- a/arch/tile/kernel/smp.c +++ /dev/null @@ -1,287 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * TILE SMP support routines. - */ - -#include <linux/smp.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/irq_work.h> -#include <linux/module.h> -#include <asm/cacheflush.h> -#include <asm/homecache.h> - -/* - * We write to width and height with a single store in head_NN.S, - * so make the variable aligned to "long". - */ -HV_Topology smp_topology __ro_after_init __aligned(sizeof(long)); -EXPORT_SYMBOL(smp_topology); - -#if CHIP_HAS_IPI() -static unsigned long __iomem *ipi_mappings[NR_CPUS]; -#endif - -/* Does messaging work correctly to the local cpu? */ -bool self_interrupt_ok; - -/* - * Top-level send_IPI*() functions to send messages to other cpus. - */ - -/* Set by smp_send_stop() to avoid recursive panics. */ -static int stopping_cpus; - -static void __send_IPI_many(HV_Recipient *recip, int nrecip, int tag) -{ - int sent = 0; - while (sent < nrecip) { - int rc = hv_send_message(recip, nrecip, - (HV_VirtAddr)&tag, sizeof(tag)); - if (rc < 0) { - if (!stopping_cpus) /* avoid recursive panic */ - panic("hv_send_message returned %d", rc); - break; - } - WARN_ONCE(rc == 0, "hv_send_message() returned zero\n"); - sent += rc; - } -} - -void send_IPI_single(int cpu, int tag) -{ - HV_Recipient recip = { - .y = cpu / smp_width, - .x = cpu % smp_width, - .state = HV_TO_BE_SENT - }; - __send_IPI_many(&recip, 1, tag); -} - -void send_IPI_many(const struct cpumask *mask, int tag) -{ - HV_Recipient recip[NR_CPUS]; - int cpu; - int nrecip = 0; - int my_cpu = smp_processor_id(); - for_each_cpu(cpu, mask) { - HV_Recipient *r; - BUG_ON(cpu == my_cpu); - r = &recip[nrecip++]; - r->y = cpu / smp_width; - r->x = cpu % smp_width; - r->state = HV_TO_BE_SENT; - } - __send_IPI_many(recip, nrecip, tag); -} - -void send_IPI_allbutself(int tag) -{ - struct cpumask mask; - cpumask_copy(&mask, cpu_online_mask); - cpumask_clear_cpu(smp_processor_id(), &mask); - send_IPI_many(&mask, tag); -} - -/* - * Functions related to starting/stopping cpus. - */ - -/* Handler to start the current cpu. */ -static void smp_start_cpu_interrupt(void) -{ - get_irq_regs()->pc = start_cpu_function_addr; -} - -/* Handler to stop the current cpu. */ -static void smp_stop_cpu_interrupt(void) -{ - arch_local_irq_disable_all(); - set_cpu_online(smp_processor_id(), 0); - for (;;) - asm("nap; nop"); -} - -/* This function calls the 'stop' function on all other CPUs in the system. */ -void smp_send_stop(void) -{ - stopping_cpus = 1; - send_IPI_allbutself(MSG_TAG_STOP_CPU); -} - -/* On panic, just wait; we may get an smp_send_stop() later on. */ -void panic_smp_self_stop(void) -{ - while (1) - asm("nap; nop"); -} - -/* - * Dispatch code called from hv_message_intr() for HV_MSG_TILE hv messages. - */ -void evaluate_message(int tag) -{ - switch (tag) { - case MSG_TAG_START_CPU: /* Start up a cpu */ - smp_start_cpu_interrupt(); - break; - - case MSG_TAG_STOP_CPU: /* Sent to shut down slave CPU's */ - smp_stop_cpu_interrupt(); - break; - - case MSG_TAG_CALL_FUNCTION_MANY: /* Call function on cpumask */ - generic_smp_call_function_interrupt(); - break; - - case MSG_TAG_CALL_FUNCTION_SINGLE: /* Call function on one other CPU */ - generic_smp_call_function_single_interrupt(); - break; - - case MSG_TAG_IRQ_WORK: /* Invoke IRQ work */ - irq_work_run(); - break; - - default: - panic("Unknown IPI message tag %d", tag); - break; - } -} - - -/* - * flush_icache_range() code uses smp_call_function(). - */ - -struct ipi_flush { - unsigned long start; - unsigned long end; -}; - -static void ipi_flush_icache_range(void *info) -{ - struct ipi_flush *flush = (struct ipi_flush *) info; - __flush_icache_range(flush->start, flush->end); -} - -void flush_icache_range(unsigned long start, unsigned long end) -{ - struct ipi_flush flush = { start, end }; - - /* If invoked with irqs disabled, we can not issue IPIs. */ - if (irqs_disabled()) - flush_remote(0, HV_FLUSH_EVICT_L1I, NULL, 0, 0, 0, - NULL, NULL, 0); - else { - preempt_disable(); - on_each_cpu(ipi_flush_icache_range, &flush, 1); - preempt_enable(); - } -} -EXPORT_SYMBOL(flush_icache_range); - - -#ifdef CONFIG_IRQ_WORK -void arch_irq_work_raise(void) -{ - if (arch_irq_work_has_interrupt()) - send_IPI_single(smp_processor_id(), MSG_TAG_IRQ_WORK); -} -#endif - - -/* Called when smp_send_reschedule() triggers IRQ_RESCHEDULE. */ -static irqreturn_t handle_reschedule_ipi(int irq, void *token) -{ - __this_cpu_inc(irq_stat.irq_resched_count); - scheduler_ipi(); - - return IRQ_HANDLED; -} - -static struct irqaction resched_action = { - .handler = handle_reschedule_ipi, - .name = "resched", - .dev_id = handle_reschedule_ipi /* unique token */, -}; - -void __init ipi_init(void) -{ - int cpu = smp_processor_id(); - HV_Recipient recip = { .y = cpu_y(cpu), .x = cpu_x(cpu), - .state = HV_TO_BE_SENT }; - int tag = MSG_TAG_CALL_FUNCTION_SINGLE; - - /* - * Test if we can message ourselves for arch_irq_work_raise. - * This functionality is only available in the Tilera hypervisor - * in versions 4.3.4 and following. - */ - if (hv_send_message(&recip, 1, (HV_VirtAddr)&tag, sizeof(tag)) == 1) - self_interrupt_ok = true; - else - pr_warn("Older hypervisor: disabling fast irq_work_raise\n"); - -#if CHIP_HAS_IPI() - /* Map IPI trigger MMIO addresses. */ - for_each_possible_cpu(cpu) { - HV_Coord tile; - HV_PTE pte; - unsigned long offset; - - tile.x = cpu_x(cpu); - tile.y = cpu_y(cpu); - if (hv_get_ipi_pte(tile, KERNEL_PL, &pte) != 0) - panic("Failed to initialize IPI for cpu %d\n", cpu); - - offset = PFN_PHYS(pte_pfn(pte)); - ipi_mappings[cpu] = ioremap_prot(offset, PAGE_SIZE, pte); - } -#endif - - /* Bind handle_reschedule_ipi() to IRQ_RESCHEDULE. */ - tile_irq_activate(IRQ_RESCHEDULE, TILE_IRQ_PERCPU); - BUG_ON(setup_irq(IRQ_RESCHEDULE, &resched_action)); -} - -#if CHIP_HAS_IPI() - -void smp_send_reschedule(int cpu) -{ - WARN_ON(cpu_is_offline(cpu)); - - /* - * We just want to do an MMIO store. The traditional writeq() - * functions aren't really correct here, since they're always - * directed at the PCI shim. For now, just do a raw store, - * casting away the __iomem attribute. - */ - ((unsigned long __force *)ipi_mappings[cpu])[IRQ_RESCHEDULE] = 0; -} - -#else - -void smp_send_reschedule(int cpu) -{ - HV_Coord coord; - - WARN_ON(cpu_is_offline(cpu)); - - coord.y = cpu_y(cpu); - coord.x = cpu_x(cpu); - hv_trigger_ipi(coord, IRQ_RESCHEDULE); -} - -#endif /* CHIP_HAS_IPI() */ diff --git a/arch/tile/kernel/smpboot.c b/arch/tile/kernel/smpboot.c deleted file mode 100644 index 869c22e57561..000000000000 --- a/arch/tile/kernel/smpboot.c +++ /dev/null @@ -1,269 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/sched/mm.h> -#include <linux/sched/task.h> -#include <linux/kernel_stat.h> -#include <linux/bootmem.h> -#include <linux/notifier.h> -#include <linux/cpu.h> -#include <linux/percpu.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/irq.h> -#include <asm/mmu_context.h> -#include <asm/tlbflush.h> -#include <asm/sections.h> - -/* State of each CPU. */ -static DEFINE_PER_CPU(int, cpu_state) = { 0 }; - -/* The messaging code jumps to this pointer during boot-up */ -unsigned long start_cpu_function_addr; - -/* Called very early during startup to mark boot cpu as online */ -void __init smp_prepare_boot_cpu(void) -{ - int cpu = smp_processor_id(); - set_cpu_online(cpu, 1); - set_cpu_present(cpu, 1); - __this_cpu_write(cpu_state, CPU_ONLINE); - - init_messaging(); -} - -static void start_secondary(void); - -/* - * Called at the top of init() to launch all the other CPUs. - * They run free to complete their initialization and then wait - * until they get an IPI from the boot cpu to come online. - */ -void __init smp_prepare_cpus(unsigned int max_cpus) -{ - long rc; - int cpu, cpu_count; - int boot_cpu = smp_processor_id(); - - current_thread_info()->cpu = boot_cpu; - - /* - * Pin this task to the boot CPU while we bring up the others, - * just to make sure we don't uselessly migrate as they come up. - */ - rc = sched_setaffinity(current->pid, cpumask_of(boot_cpu)); - if (rc != 0) - pr_err("Couldn't set init affinity to boot cpu (%ld)\n", rc); - - /* Print information about disabled and dataplane cpus. */ - print_disabled_cpus(); - - /* - * Tell the messaging subsystem how to respond to the - * startup message. We use a level of indirection to avoid - * confusing the linker with the fact that the messaging - * subsystem is calling __init code. - */ - start_cpu_function_addr = (unsigned long) &online_secondary; - - /* Set up thread context for all new processors. */ - cpu_count = 1; - for (cpu = 0; cpu < NR_CPUS; ++cpu) { - struct task_struct *idle; - - if (cpu == boot_cpu) - continue; - - if (!cpu_possible(cpu)) { - /* - * Make this processor do nothing on boot. - * Note that we don't give the boot_pc function - * a stack, so it has to be assembly code. - */ - per_cpu(boot_sp, cpu) = 0; - per_cpu(boot_pc, cpu) = (unsigned long) smp_nap; - continue; - } - - /* Create a new idle thread to run start_secondary() */ - idle = fork_idle(cpu); - if (IS_ERR(idle)) - panic("failed fork for CPU %d", cpu); - idle->thread.pc = (unsigned long) start_secondary; - - /* Make this thread the boot thread for this processor */ - per_cpu(boot_sp, cpu) = task_ksp0(idle); - per_cpu(boot_pc, cpu) = idle->thread.pc; - - ++cpu_count; - } - BUG_ON(cpu_count > (max_cpus ? max_cpus : 1)); - - /* Fire up the other tiles, if any */ - init_cpu_present(cpu_possible_mask); - if (cpumask_weight(cpu_present_mask) > 1) { - mb(); /* make sure all data is visible to new processors */ - hv_start_all_tiles(); - } -} - -static __initdata struct cpumask init_affinity; - -static __init int reset_init_affinity(void) -{ - long rc = sched_setaffinity(current->pid, &init_affinity); - if (rc != 0) - pr_warn("couldn't reset init affinity (%ld)\n", rc); - return 0; -} -late_initcall(reset_init_affinity); - -static struct cpumask cpu_started; - -/* - * Activate a secondary processor. Very minimal; don't add anything - * to this path without knowing what you're doing, since SMP booting - * is pretty fragile. - */ -static void start_secondary(void) -{ - int cpuid; - - preempt_disable(); - - cpuid = smp_processor_id(); - - /* Set our thread pointer appropriately. */ - set_my_cpu_offset(__per_cpu_offset[cpuid]); - - /* - * In large machines even this will slow us down, since we - * will be contending for for the printk spinlock. - */ - /* printk(KERN_DEBUG "Initializing CPU#%d\n", cpuid); */ - - /* Initialize the current asid for our first page table. */ - __this_cpu_write(current_asid, min_asid); - - /* Set up this thread as another owner of the init_mm */ - mmgrab(&init_mm); - current->active_mm = &init_mm; - if (current->mm) - BUG(); - enter_lazy_tlb(&init_mm, current); - - /* Allow hypervisor messages to be received */ - init_messaging(); - local_irq_enable(); - - /* Indicate that we're ready to come up. */ - /* Must not do this before we're ready to receive messages */ - if (cpumask_test_and_set_cpu(cpuid, &cpu_started)) { - pr_warn("CPU#%d already started!\n", cpuid); - for (;;) - local_irq_enable(); - } - - smp_nap(); -} - -/* - * Bring a secondary processor online. - */ -void online_secondary(void) -{ - /* - * low-memory mappings have been cleared, flush them from - * the local TLBs too. - */ - local_flush_tlb(); - - BUG_ON(in_interrupt()); - - /* This must be done before setting cpu_online_mask */ - wmb(); - - notify_cpu_starting(smp_processor_id()); - - set_cpu_online(smp_processor_id(), 1); - __this_cpu_write(cpu_state, CPU_ONLINE); - - /* Set up tile-specific state for this cpu. */ - setup_cpu(0); - - /* Set up tile-timer clock-event device on this cpu */ - setup_tile_timer(); - - cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); -} - -int __cpu_up(unsigned int cpu, struct task_struct *tidle) -{ - /* Wait 5s total for all CPUs for them to come online */ - static int timeout; - for (; !cpumask_test_cpu(cpu, &cpu_started); timeout++) { - if (timeout >= 50000) { - pr_info("skipping unresponsive cpu%d\n", cpu); - local_irq_enable(); - return -EIO; - } - udelay(100); - } - - local_irq_enable(); - per_cpu(cpu_state, cpu) = CPU_UP_PREPARE; - - /* Unleash the CPU! */ - send_IPI_single(cpu, MSG_TAG_START_CPU); - while (!cpumask_test_cpu(cpu, cpu_online_mask)) - cpu_relax(); - return 0; -} - -static void panic_start_cpu(void) -{ - panic("Received a MSG_START_CPU IPI after boot finished."); -} - -void __init smp_cpus_done(unsigned int max_cpus) -{ - int cpu, next, rc; - - /* Reset the response to a (now illegal) MSG_START_CPU IPI. */ - start_cpu_function_addr = (unsigned long) &panic_start_cpu; - - cpumask_copy(&init_affinity, cpu_online_mask); - - /* - * Pin ourselves to a single cpu in the initial affinity set - * so that kernel mappings for the rootfs are not in the dataplane, - * if set, and to avoid unnecessary migrating during bringup. - * Use the last cpu just in case the whole chip has been - * isolated from the scheduler, to keep init away from likely - * more useful user code. This also ensures that work scheduled - * via schedule_delayed_work() in the init routines will land - * on this cpu. - */ - for (cpu = cpumask_first(&init_affinity); - (next = cpumask_next(cpu, &init_affinity)) < nr_cpu_ids; - cpu = next) - ; - rc = sched_setaffinity(current->pid, cpumask_of(cpu)); - if (rc != 0) - pr_err("Couldn't set init affinity to cpu %d (%d)\n", cpu, rc); -} diff --git a/arch/tile/kernel/stack.c b/arch/tile/kernel/stack.c deleted file mode 100644 index 94ecbc6676e5..000000000000 --- a/arch/tile/kernel/stack.c +++ /dev/null @@ -1,539 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/sched.h> -#include <linux/sched/debug.h> -#include <linux/sched/task_stack.h> -#include <linux/kernel.h> -#include <linux/kprobes.h> -#include <linux/module.h> -#include <linux/pfn.h> -#include <linux/kallsyms.h> -#include <linux/stacktrace.h> -#include <linux/uaccess.h> -#include <linux/mmzone.h> -#include <linux/dcache.h> -#include <linux/fs.h> -#include <linux/hardirq.h> -#include <linux/string.h> -#include <asm/backtrace.h> -#include <asm/page.h> -#include <asm/ucontext.h> -#include <asm/switch_to.h> -#include <asm/sigframe.h> -#include <asm/stack.h> -#include <asm/vdso.h> -#include <arch/abi.h> -#include <arch/interrupts.h> - -#define KBT_ONGOING 0 /* Backtrace still ongoing */ -#define KBT_DONE 1 /* Backtrace cleanly completed */ -#define KBT_RUNNING 2 /* Can't run backtrace on a running task */ -#define KBT_LOOP 3 /* Backtrace entered a loop */ - -/* Is address on the specified kernel stack? */ -static int in_kernel_stack(struct KBacktraceIterator *kbt, unsigned long sp) -{ - ulong kstack_base = (ulong) kbt->task->stack; - if (kstack_base == 0) /* corrupt task pointer; just follow stack... */ - return sp >= PAGE_OFFSET && sp < (unsigned long)high_memory; - return sp >= kstack_base && sp < kstack_base + THREAD_SIZE; -} - -/* Callback for backtracer; basically a glorified memcpy */ -static bool read_memory_func(void *result, unsigned long address, - unsigned int size, void *vkbt) -{ - int retval; - struct KBacktraceIterator *kbt = (struct KBacktraceIterator *)vkbt; - - if (address == 0) - return 0; - if (__kernel_text_address(address)) { - /* OK to read kernel code. */ - } else if (address >= PAGE_OFFSET) { - /* We only tolerate kernel-space reads of this task's stack */ - if (!in_kernel_stack(kbt, address)) - return 0; - } else if (!kbt->is_current) { - return 0; /* can't read from other user address spaces */ - } - pagefault_disable(); - retval = __copy_from_user_inatomic(result, - (void __user __force *)address, - size); - pagefault_enable(); - return (retval == 0); -} - -/* Return a pt_regs pointer for a valid fault handler frame */ -static struct pt_regs *valid_fault_handler(struct KBacktraceIterator* kbt) -{ - char fault[64]; - unsigned long sp = kbt->it.sp; - struct pt_regs *p; - - if (sp % sizeof(long) != 0) - return NULL; - if (!in_kernel_stack(kbt, sp)) - return NULL; - if (!in_kernel_stack(kbt, sp + C_ABI_SAVE_AREA_SIZE + PTREGS_SIZE-1)) - return NULL; - p = (struct pt_regs *)(sp + C_ABI_SAVE_AREA_SIZE); - if (kbt->verbose) { /* else we aren't going to use it */ - if (p->faultnum == INT_SWINT_1 || - p->faultnum == INT_SWINT_1_SIGRETURN) - snprintf(fault, sizeof(fault), - "syscall %ld", p->regs[TREG_SYSCALL_NR]); - else - snprintf(fault, sizeof(fault), - "interrupt %ld", p->faultnum); - } - if (EX1_PL(p->ex1) == KERNEL_PL && - __kernel_text_address(p->pc) && - in_kernel_stack(kbt, p->sp) && - p->sp >= sp) { - if (kbt->verbose) - pr_err(" <%s while in kernel mode>\n", fault); - } else if (user_mode(p) && - p->sp < PAGE_OFFSET && p->sp != 0) { - if (kbt->verbose) - pr_err(" <%s while in user mode>\n", fault); - } else { - if (kbt->verbose && (p->pc != 0 || p->sp != 0 || p->ex1 != 0)) - pr_err(" (odd fault: pc %#lx, sp %#lx, ex1 %#lx?)\n", - p->pc, p->sp, p->ex1); - return NULL; - } - if (kbt->profile && ((1ULL << p->faultnum) & QUEUED_INTERRUPTS) != 0) - return NULL; - return p; -} - -/* Is the iterator pointing to a sigreturn trampoline? */ -static int is_sigreturn(struct KBacktraceIterator *kbt) -{ - return kbt->task->mm && - (kbt->it.pc == ((ulong)kbt->task->mm->context.vdso_base + - (ulong)&__vdso_rt_sigreturn)); -} - -/* Return a pt_regs pointer for a valid signal handler frame */ -static struct pt_regs *valid_sigframe(struct KBacktraceIterator* kbt, - struct rt_sigframe* kframe) -{ - BacktraceIterator *b = &kbt->it; - - if (is_sigreturn(kbt) && b->sp < PAGE_OFFSET && - b->sp % sizeof(long) == 0) { - int retval; - pagefault_disable(); - retval = __copy_from_user_inatomic( - kframe, (void __user __force *)b->sp, - sizeof(*kframe)); - pagefault_enable(); - if (retval != 0 || - (unsigned int)(kframe->info.si_signo) >= _NSIG) - return NULL; - if (kbt->verbose) { - pr_err(" <received signal %d>\n", - kframe->info.si_signo); - } - return (struct pt_regs *)&kframe->uc.uc_mcontext; - } - return NULL; -} - -static int KBacktraceIterator_restart(struct KBacktraceIterator *kbt) -{ - struct pt_regs *p; - struct rt_sigframe kframe; - - p = valid_fault_handler(kbt); - if (p == NULL) - p = valid_sigframe(kbt, &kframe); - if (p == NULL) - return 0; - backtrace_init(&kbt->it, read_memory_func, kbt, - p->pc, p->lr, p->sp, p->regs[52]); - kbt->new_context = 1; - return 1; -} - -/* Find a frame that isn't a sigreturn, if there is one. */ -static int KBacktraceIterator_next_item_inclusive( - struct KBacktraceIterator *kbt) -{ - for (;;) { - do { - if (!is_sigreturn(kbt)) - return KBT_ONGOING; - } while (backtrace_next(&kbt->it)); - - if (!KBacktraceIterator_restart(kbt)) - return KBT_DONE; - } -} - -/* - * If the current sp is on a page different than what we recorded - * as the top-of-kernel-stack last time we context switched, we have - * probably blown the stack, and nothing is going to work out well. - * If we can at least get out a warning, that may help the debug, - * though we probably won't be able to backtrace into the code that - * actually did the recursive damage. - */ -static void validate_stack(struct pt_regs *regs) -{ - int cpu = raw_smp_processor_id(); - unsigned long ksp0 = get_current_ksp0(); - unsigned long ksp0_base = ksp0 & -THREAD_SIZE; - unsigned long sp = stack_pointer; - - if (EX1_PL(regs->ex1) == KERNEL_PL && regs->sp >= ksp0) { - pr_err("WARNING: cpu %d: kernel stack %#lx..%#lx underrun!\n" - " sp %#lx (%#lx in caller), caller pc %#lx, lr %#lx\n", - cpu, ksp0_base, ksp0, sp, regs->sp, regs->pc, regs->lr); - } - - else if (sp < ksp0_base + sizeof(struct thread_info)) { - pr_err("WARNING: cpu %d: kernel stack %#lx..%#lx overrun!\n" - " sp %#lx (%#lx in caller), caller pc %#lx, lr %#lx\n", - cpu, ksp0_base, ksp0, sp, regs->sp, regs->pc, regs->lr); - } -} - -void KBacktraceIterator_init(struct KBacktraceIterator *kbt, - struct task_struct *t, struct pt_regs *regs) -{ - unsigned long pc, lr, sp, r52; - int is_current; - - /* - * Set up callback information. We grab the kernel stack base - * so we will allow reads of that address range. - */ - is_current = (t == NULL || t == current); - kbt->is_current = is_current; - if (is_current) - t = validate_current(); - kbt->task = t; - kbt->verbose = 0; /* override in caller if desired */ - kbt->profile = 0; /* override in caller if desired */ - kbt->end = KBT_ONGOING; - kbt->new_context = 1; - if (is_current) - validate_stack(regs); - - if (regs == NULL) { - if (is_current || t->state == TASK_RUNNING) { - /* Can't do this; we need registers */ - kbt->end = KBT_RUNNING; - return; - } - pc = get_switch_to_pc(); - lr = t->thread.pc; - sp = t->thread.ksp; - r52 = 0; - } else { - pc = regs->pc; - lr = regs->lr; - sp = regs->sp; - r52 = regs->regs[52]; - } - - backtrace_init(&kbt->it, read_memory_func, kbt, pc, lr, sp, r52); - kbt->end = KBacktraceIterator_next_item_inclusive(kbt); -} -EXPORT_SYMBOL(KBacktraceIterator_init); - -int KBacktraceIterator_end(struct KBacktraceIterator *kbt) -{ - return kbt->end != KBT_ONGOING; -} -EXPORT_SYMBOL(KBacktraceIterator_end); - -void KBacktraceIterator_next(struct KBacktraceIterator *kbt) -{ - unsigned long old_pc = kbt->it.pc, old_sp = kbt->it.sp; - kbt->new_context = 0; - if (!backtrace_next(&kbt->it) && !KBacktraceIterator_restart(kbt)) { - kbt->end = KBT_DONE; - return; - } - kbt->end = KBacktraceIterator_next_item_inclusive(kbt); - if (old_pc == kbt->it.pc && old_sp == kbt->it.sp) { - /* Trapped in a loop; give up. */ - kbt->end = KBT_LOOP; - } -} -EXPORT_SYMBOL(KBacktraceIterator_next); - -static void describe_addr(struct KBacktraceIterator *kbt, - unsigned long address, - int have_mmap_sem, char *buf, size_t bufsize) -{ - struct vm_area_struct *vma; - size_t namelen, remaining; - unsigned long size, offset, adjust; - char *p, *modname; - const char *name; - int rc; - - /* - * Look one byte back for every caller frame (i.e. those that - * aren't a new context) so we look up symbol data for the - * call itself, not the following instruction, which may be on - * a different line (or in a different function). - */ - adjust = !kbt->new_context; - address -= adjust; - - if (address >= PAGE_OFFSET) { - /* Handle kernel symbols. */ - BUG_ON(bufsize < KSYM_NAME_LEN); - name = kallsyms_lookup(address, &size, &offset, - &modname, buf); - if (name == NULL) { - buf[0] = '\0'; - return; - } - namelen = strlen(buf); - remaining = (bufsize - 1) - namelen; - p = buf + namelen; - rc = snprintf(p, remaining, "+%#lx/%#lx ", - offset + adjust, size); - if (modname && rc < remaining) - snprintf(p + rc, remaining - rc, "[%s] ", modname); - buf[bufsize-1] = '\0'; - return; - } - - /* If we don't have the mmap_sem, we can't show any more info. */ - buf[0] = '\0'; - if (!have_mmap_sem) - return; - - /* Find vma info. */ - vma = find_vma(kbt->task->mm, address); - if (vma == NULL || address < vma->vm_start) { - snprintf(buf, bufsize, "[unmapped address] "); - return; - } - - if (vma->vm_file) { - p = file_path(vma->vm_file, buf, bufsize); - if (IS_ERR(p)) - p = "?"; - name = kbasename(p); - } else { - name = "anon"; - } - - /* Generate a string description of the vma info. */ - namelen = strlen(name); - remaining = (bufsize - 1) - namelen; - memmove(buf, name, namelen); - snprintf(buf + namelen, remaining, "[%lx+%lx] ", - vma->vm_start, vma->vm_end - vma->vm_start); -} - -/* - * Avoid possible crash recursion during backtrace. If it happens, it - * makes it easy to lose the actual root cause of the failure, so we - * put a simple guard on all the backtrace loops. - */ -static bool start_backtrace(void) -{ - if (current_thread_info()->in_backtrace) { - pr_err("Backtrace requested while in backtrace!\n"); - return false; - } - current_thread_info()->in_backtrace = true; - return true; -} - -static void end_backtrace(void) -{ - current_thread_info()->in_backtrace = false; -} - -/* - * This method wraps the backtracer's more generic support. - * It is only invoked from the architecture-specific code; show_stack() - * and dump_stack() are architecture-independent entry points. - */ -void tile_show_stack(struct KBacktraceIterator *kbt) -{ - int i; - int have_mmap_sem = 0; - - if (!start_backtrace()) - return; - kbt->verbose = 1; - i = 0; - for (; !KBacktraceIterator_end(kbt); KBacktraceIterator_next(kbt)) { - char namebuf[KSYM_NAME_LEN+100]; - unsigned long address = kbt->it.pc; - - /* - * Try to acquire the mmap_sem as we pass into userspace. - * If we're in an interrupt context, don't even try, since - * it's not safe to call e.g. d_path() from an interrupt, - * since it uses spin locks without disabling interrupts. - * Note we test "kbt->task == current", not "kbt->is_current", - * since we're checking that "current" will work in d_path(). - */ - if (kbt->task == current && address < PAGE_OFFSET && - !have_mmap_sem && kbt->task->mm && !in_interrupt()) { - have_mmap_sem = - down_read_trylock(&kbt->task->mm->mmap_sem); - } - - describe_addr(kbt, address, have_mmap_sem, - namebuf, sizeof(namebuf)); - - pr_err(" frame %d: 0x%lx %s(sp 0x%lx)\n", - i++, address, namebuf, (unsigned long)(kbt->it.sp)); - - if (i >= 100) { - pr_err("Stack dump truncated (%d frames)\n", i); - break; - } - } - if (kbt->end == KBT_LOOP) - pr_err("Stack dump stopped; next frame identical to this one\n"); - if (have_mmap_sem) - up_read(&kbt->task->mm->mmap_sem); - end_backtrace(); -} -EXPORT_SYMBOL(tile_show_stack); - -static struct pt_regs *regs_to_pt_regs(struct pt_regs *regs, - ulong pc, ulong lr, ulong sp, ulong r52) -{ - memset(regs, 0, sizeof(struct pt_regs)); - regs->pc = pc; - regs->lr = lr; - regs->sp = sp; - regs->regs[52] = r52; - return regs; -} - -/* Deprecated function currently only used by kernel_double_fault(). */ -void _dump_stack(int dummy, ulong pc, ulong lr, ulong sp, ulong r52) -{ - struct KBacktraceIterator kbt; - struct pt_regs regs; - - regs_to_pt_regs(®s, pc, lr, sp, r52); - KBacktraceIterator_init(&kbt, NULL, ®s); - tile_show_stack(&kbt); -} - -/* This is called from KBacktraceIterator_init_current() */ -void _KBacktraceIterator_init_current(struct KBacktraceIterator *kbt, ulong pc, - ulong lr, ulong sp, ulong r52) -{ - struct pt_regs regs; - KBacktraceIterator_init(kbt, NULL, - regs_to_pt_regs(®s, pc, lr, sp, r52)); -} - -/* - * Called from sched_show_task() with task != NULL, or dump_stack() - * with task == NULL. The esp argument is always NULL. - */ -void show_stack(struct task_struct *task, unsigned long *esp) -{ - struct KBacktraceIterator kbt; - if (task == NULL || task == current) { - KBacktraceIterator_init_current(&kbt); - KBacktraceIterator_next(&kbt); /* don't show first frame */ - } else { - KBacktraceIterator_init(&kbt, task, NULL); - } - tile_show_stack(&kbt); -} - -#ifdef CONFIG_STACKTRACE - -/* Support generic Linux stack API too */ - -static void save_stack_trace_common(struct task_struct *task, - struct pt_regs *regs, - bool user, - struct stack_trace *trace) -{ - struct KBacktraceIterator kbt; - int skip = trace->skip; - int i = 0; - - if (!start_backtrace()) - goto done; - if (regs != NULL) { - KBacktraceIterator_init(&kbt, NULL, regs); - } else if (task == NULL || task == current) { - KBacktraceIterator_init_current(&kbt); - skip++; /* don't show KBacktraceIterator_init_current */ - } else { - KBacktraceIterator_init(&kbt, task, NULL); - } - for (; !KBacktraceIterator_end(&kbt); KBacktraceIterator_next(&kbt)) { - if (skip) { - --skip; - continue; - } - if (i >= trace->max_entries || - (!user && kbt.it.pc < PAGE_OFFSET)) - break; - trace->entries[i++] = kbt.it.pc; - } - end_backtrace(); -done: - if (i < trace->max_entries) - trace->entries[i++] = ULONG_MAX; - trace->nr_entries = i; -} - -void save_stack_trace_tsk(struct task_struct *task, struct stack_trace *trace) -{ - save_stack_trace_common(task, NULL, false, trace); -} -EXPORT_SYMBOL(save_stack_trace_tsk); - -void save_stack_trace(struct stack_trace *trace) -{ - save_stack_trace_common(NULL, NULL, false, trace); -} -EXPORT_SYMBOL_GPL(save_stack_trace); - -void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace) -{ - save_stack_trace_common(NULL, regs, false, trace); -} - -void save_stack_trace_user(struct stack_trace *trace) -{ - /* Trace user stack if we are not a kernel thread. */ - if (current->mm) - save_stack_trace_common(NULL, task_pt_regs(current), - true, trace); - else if (trace->nr_entries < trace->max_entries) - trace->entries[trace->nr_entries++] = ULONG_MAX; -} -#endif - -/* In entry.S */ -EXPORT_SYMBOL(KBacktraceIterator_init_current); diff --git a/arch/tile/kernel/sys.c b/arch/tile/kernel/sys.c deleted file mode 100644 index c7418dcbbb08..000000000000 --- a/arch/tile/kernel/sys.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * This file contains various random system calls that - * have a non-standard calling sequence on the Linux/TILE - * platform. - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/syscalls.h> -#include <linux/mman.h> -#include <linux/file.h> -#include <linux/mempolicy.h> -#include <linux/binfmts.h> -#include <linux/fs.h> -#include <linux/compat.h> -#include <linux/uaccess.h> -#include <linux/signal.h> -#include <asm/syscalls.h> -#include <asm/pgtable.h> -#include <asm/homecache.h> -#include <asm/cachectl.h> -#include <asm/byteorder.h> -#include <arch/chip.h> - -SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, len, - unsigned long, flags) -{ - /* DCACHE is not particularly effective if not bound to one cpu. */ - if (flags & DCACHE) - homecache_evict(cpumask_of(raw_smp_processor_id())); - - if (flags & ICACHE) - flush_remote(0, HV_FLUSH_EVICT_L1I, mm_cpumask(current->mm), - 0, 0, 0, NULL, NULL, 0); - return 0; -} - -/* - * Syscalls that pass 64-bit values on 32-bit systems normally - * pass them as (low,high) word packed into the immediately adjacent - * registers. If the low word naturally falls on an even register, - * our ABI makes it work correctly; if not, we adjust it here. - * Handling it here means we don't have to fix uclibc AND glibc AND - * any other standard libcs we want to support. - */ - -#if !defined(__tilegx__) || defined(CONFIG_COMPAT) - -#ifdef __BIG_ENDIAN -#define SYSCALL_PAIR(name) u32 name ## _hi, u32 name ## _lo -#else -#define SYSCALL_PAIR(name) u32 name ## _lo, u32 name ## _hi -#endif - -ssize_t sys32_readahead(int fd, SYSCALL_PAIR(offset), u32 count) -{ - return sys_readahead(fd, ((loff_t)offset_hi << 32) | offset_lo, count); -} - -int sys32_fadvise64_64(int fd, SYSCALL_PAIR(offset), - SYSCALL_PAIR(len), int advice) -{ - return sys_fadvise64_64(fd, ((loff_t)offset_hi << 32) | offset_lo, - ((loff_t)len_hi << 32) | len_lo, advice); -} - -#endif /* 32-bit syscall wrappers */ - -/* Note: used by the compat code even in 64-bit Linux. */ -SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len, - unsigned long, prot, unsigned long, flags, - unsigned long, fd, unsigned long, off_4k) -{ -#define PAGE_ADJUST (PAGE_SHIFT - 12) - if (off_4k & ((1 << PAGE_ADJUST) - 1)) - return -EINVAL; - return sys_mmap_pgoff(addr, len, prot, flags, fd, - off_4k >> PAGE_ADJUST); -} - -#ifdef __tilegx__ -SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len, - unsigned long, prot, unsigned long, flags, - unsigned long, fd, off_t, offset) -{ - if (offset & ((1 << PAGE_SHIFT) - 1)) - return -EINVAL; - return sys_mmap_pgoff(addr, len, prot, flags, fd, - offset >> PAGE_SHIFT); -} -#endif - - -/* Provide the actual syscall number to call mapping. */ -#undef __SYSCALL -#define __SYSCALL(nr, call) [nr] = (call), - -#ifndef __tilegx__ -/* See comments at the top of the file. */ -#define sys_fadvise64_64 sys32_fadvise64_64 -#define sys_readahead sys32_readahead -#endif - -/* Call the assembly trampolines where necessary. */ -#undef sys_rt_sigreturn -#define sys_rt_sigreturn _sys_rt_sigreturn -#define sys_clone _sys_clone - -/* - * Note that we can't include <linux/unistd.h> here since the header - * guard will defeat us; <asm/unistd.h> checks for __SYSCALL as well. - */ -void *sys_call_table[__NR_syscalls] = { - [0 ... __NR_syscalls-1] = sys_ni_syscall, -#include <asm/unistd.h> -}; diff --git a/arch/tile/kernel/sysfs.c b/arch/tile/kernel/sysfs.c deleted file mode 100644 index b09456a3d77a..000000000000 --- a/arch/tile/kernel/sysfs.c +++ /dev/null @@ -1,266 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * /sys entry support. - */ - -#include <linux/device.h> -#include <linux/cpu.h> -#include <linux/slab.h> -#include <linux/smp.h> -#include <linux/stat.h> -#include <hv/hypervisor.h> - -/* Return a string queried from the hypervisor, truncated to page size. */ -static ssize_t get_hv_confstr(char *page, int query) -{ - ssize_t n = hv_confstr(query, (unsigned long)page, PAGE_SIZE - 1); - n = n < 0 ? 0 : min(n, (ssize_t)PAGE_SIZE - 1) - 1; - if (n) - page[n++] = '\n'; - page[n] = '\0'; - return n; -} - -static ssize_t chip_width_show(struct device *dev, - struct device_attribute *attr, - char *page) -{ - return sprintf(page, "%u\n", smp_width); -} -static DEVICE_ATTR_RO(chip_width); - -static ssize_t chip_height_show(struct device *dev, - struct device_attribute *attr, - char *page) -{ - return sprintf(page, "%u\n", smp_height); -} -static DEVICE_ATTR_RO(chip_height); - -static ssize_t chip_serial_show(struct device *dev, - struct device_attribute *attr, - char *page) -{ - return get_hv_confstr(page, HV_CONFSTR_CHIP_SERIAL_NUM); -} -static DEVICE_ATTR_RO(chip_serial); - -static ssize_t chip_revision_show(struct device *dev, - struct device_attribute *attr, - char *page) -{ - return get_hv_confstr(page, HV_CONFSTR_CHIP_REV); -} -static DEVICE_ATTR_RO(chip_revision); - - -static ssize_t type_show(struct device *dev, - struct device_attribute *attr, - char *page) -{ - return sprintf(page, "tilera\n"); -} -static DEVICE_ATTR_RO(type); - -#define HV_CONF_ATTR(name, conf) \ - static ssize_t name ## _show(struct device *dev, \ - struct device_attribute *attr, \ - char *page) \ - { \ - return get_hv_confstr(page, conf); \ - } \ - static DEVICE_ATTR(name, 0444, name ## _show, NULL); - -HV_CONF_ATTR(version, HV_CONFSTR_HV_SW_VER) -HV_CONF_ATTR(config_version, HV_CONFSTR_HV_CONFIG_VER) - -HV_CONF_ATTR(board_part, HV_CONFSTR_BOARD_PART_NUM) -HV_CONF_ATTR(board_serial, HV_CONFSTR_BOARD_SERIAL_NUM) -HV_CONF_ATTR(board_revision, HV_CONFSTR_BOARD_REV) -HV_CONF_ATTR(board_description, HV_CONFSTR_BOARD_DESC) -HV_CONF_ATTR(mezz_part, HV_CONFSTR_MEZZ_PART_NUM) -HV_CONF_ATTR(mezz_serial, HV_CONFSTR_MEZZ_SERIAL_NUM) -HV_CONF_ATTR(mezz_revision, HV_CONFSTR_MEZZ_REV) -HV_CONF_ATTR(mezz_description, HV_CONFSTR_MEZZ_DESC) -HV_CONF_ATTR(cpumod_part, HV_CONFSTR_CPUMOD_PART_NUM) -HV_CONF_ATTR(cpumod_serial, HV_CONFSTR_CPUMOD_SERIAL_NUM) -HV_CONF_ATTR(cpumod_revision, HV_CONFSTR_CPUMOD_REV) -HV_CONF_ATTR(cpumod_description,HV_CONFSTR_CPUMOD_DESC) -HV_CONF_ATTR(switch_control, HV_CONFSTR_SWITCH_CONTROL) - -static struct attribute *board_attrs[] = { - &dev_attr_board_part.attr, - &dev_attr_board_serial.attr, - &dev_attr_board_revision.attr, - &dev_attr_board_description.attr, - &dev_attr_mezz_part.attr, - &dev_attr_mezz_serial.attr, - &dev_attr_mezz_revision.attr, - &dev_attr_mezz_description.attr, - &dev_attr_cpumod_part.attr, - &dev_attr_cpumod_serial.attr, - &dev_attr_cpumod_revision.attr, - &dev_attr_cpumod_description.attr, - &dev_attr_switch_control.attr, - NULL -}; - -static struct attribute_group board_attr_group = { - .name = "board", - .attrs = board_attrs, -}; - - -static struct bin_attribute hvconfig_bin; - -static ssize_t -hvconfig_bin_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) -{ - static size_t size; - - /* Lazily learn the true size (minus the trailing NUL). */ - if (size == 0) - size = hv_confstr(HV_CONFSTR_HV_CONFIG, 0, 0) - 1; - - /* Check and adjust input parameters. */ - if (off > size) - return -EINVAL; - if (count > size - off) - count = size - off; - - if (count) { - /* Get a copy of the hvc and copy out the relevant portion. */ - char *hvc; - - size = off + count; - hvc = kmalloc(size, GFP_KERNEL); - if (hvc == NULL) - return -ENOMEM; - hv_confstr(HV_CONFSTR_HV_CONFIG, (unsigned long)hvc, size); - memcpy(buf, hvc + off, count); - kfree(hvc); - } - - return count; -} - -static ssize_t hv_stats_show(struct device *dev, - struct device_attribute *attr, - char *page) -{ - int cpu = dev->id; - long lotar = HV_XY_TO_LOTAR(cpu_x(cpu), cpu_y(cpu)); - - ssize_t n = hv_confstr(HV_CONFSTR_HV_STATS, - (unsigned long)page, PAGE_SIZE - 1, - lotar, 0); - n = n < 0 ? 0 : min(n, (ssize_t)PAGE_SIZE - 1); - page[n] = '\0'; - return n; -} - -static ssize_t hv_stats_store(struct device *dev, - struct device_attribute *attr, - const char *page, - size_t count) -{ - int cpu = dev->id; - long lotar = HV_XY_TO_LOTAR(cpu_x(cpu), cpu_y(cpu)); - - ssize_t n = hv_confstr(HV_CONFSTR_HV_STATS, 0, 0, lotar, 1); - return n < 0 ? n : count; -} - -static DEVICE_ATTR_RW(hv_stats); - -static int hv_stats_device_add(struct device *dev, struct subsys_interface *sif) -{ - int err, cpu = dev->id; - - if (!cpu_online(cpu)) - return 0; - - err = sysfs_create_file(&dev->kobj, &dev_attr_hv_stats.attr); - - return err; -} - -static void hv_stats_device_remove(struct device *dev, - struct subsys_interface *sif) -{ - int cpu = dev->id; - - if (cpu_online(cpu)) - sysfs_remove_file(&dev->kobj, &dev_attr_hv_stats.attr); -} - - -static struct subsys_interface hv_stats_interface = { - .name = "hv_stats", - .subsys = &cpu_subsys, - .add_dev = hv_stats_device_add, - .remove_dev = hv_stats_device_remove, -}; - -static int __init create_sysfs_entries(void) -{ - int err = 0; - -#define create_cpu_attr(name) \ - if (!err) \ - err = device_create_file(cpu_subsys.dev_root, &dev_attr_##name); - create_cpu_attr(chip_width); - create_cpu_attr(chip_height); - create_cpu_attr(chip_serial); - create_cpu_attr(chip_revision); - -#define create_hv_attr(name) \ - if (!err) \ - err = sysfs_create_file(hypervisor_kobj, &dev_attr_##name.attr); - create_hv_attr(type); - create_hv_attr(version); - create_hv_attr(config_version); - - if (!err) - err = sysfs_create_group(hypervisor_kobj, &board_attr_group); - - if (!err) { - sysfs_bin_attr_init(&hvconfig_bin); - hvconfig_bin.attr.name = "hvconfig"; - hvconfig_bin.attr.mode = S_IRUGO; - hvconfig_bin.read = hvconfig_bin_read; - hvconfig_bin.size = PAGE_SIZE; - err = sysfs_create_bin_file(hypervisor_kobj, &hvconfig_bin); - } - - if (!err) { - /* - * Don't bother adding the hv_stats files on each CPU if - * our hypervisor doesn't supply statistics. - */ - int cpu = raw_smp_processor_id(); - long lotar = HV_XY_TO_LOTAR(cpu_x(cpu), cpu_y(cpu)); - char dummy; - ssize_t n = hv_confstr(HV_CONFSTR_HV_STATS, - (unsigned long) &dummy, 1, - lotar, 0); - if (n >= 0) - err = subsys_interface_register(&hv_stats_interface); - } - - return err; -} -subsys_initcall(create_sysfs_entries); diff --git a/arch/tile/kernel/tile-desc_32.c b/arch/tile/kernel/tile-desc_32.c deleted file mode 100644 index dd7bd1d8563c..000000000000 --- a/arch/tile/kernel/tile-desc_32.c +++ /dev/null @@ -1,2605 +0,0 @@ -/* TILEPro opcode information. - * - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * - * - * - * - */ - -/* This define is BFD_RELOC_##x for real bfd, or -1 for everyone else. */ -#define BFD_RELOC(x) -1 - -/* Special registers. */ -#define TREG_LR 55 -#define TREG_SN 56 -#define TREG_ZERO 63 - -#include <linux/stddef.h> -#include <asm/tile-desc.h> - -const struct tilepro_opcode tilepro_opcodes[395] = -{ - { "bpt", TILEPRO_OPC_BPT, 0x2, 0, TREG_ZERO, 0, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "info", TILEPRO_OPC_INFO, 0xf, 1, TREG_ZERO, 1, - { { 0 }, { 1 }, { 2 }, { 3 }, { 0, } }, - }, - { "infol", TILEPRO_OPC_INFOL, 0x3, 1, TREG_ZERO, 1, - { { 4 }, { 5 }, { 0, }, { 0, }, { 0, } }, - }, - { "j", TILEPRO_OPC_J, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 6 }, { 0, }, { 0, }, { 0, } }, - }, - { "jal", TILEPRO_OPC_JAL, 0x2, 1, TREG_LR, 1, - { { 0, }, { 6 }, { 0, }, { 0, }, { 0, } }, - }, - { "move", TILEPRO_OPC_MOVE, 0xf, 2, TREG_ZERO, 1, - { { 7, 8 }, { 9, 10 }, { 11, 12 }, { 13, 14 }, { 0, } }, - }, - { "move.sn", TILEPRO_OPC_MOVE_SN, 0x3, 2, TREG_SN, 1, - { { 7, 8 }, { 9, 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "movei", TILEPRO_OPC_MOVEI, 0xf, 2, TREG_ZERO, 1, - { { 7, 0 }, { 9, 1 }, { 11, 2 }, { 13, 3 }, { 0, } }, - }, - { "movei.sn", TILEPRO_OPC_MOVEI_SN, 0x3, 2, TREG_SN, 1, - { { 7, 0 }, { 9, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "moveli", TILEPRO_OPC_MOVELI, 0x3, 2, TREG_ZERO, 1, - { { 7, 4 }, { 9, 5 }, { 0, }, { 0, }, { 0, } }, - }, - { "moveli.sn", TILEPRO_OPC_MOVELI_SN, 0x3, 2, TREG_SN, 1, - { { 7, 4 }, { 9, 5 }, { 0, }, { 0, }, { 0, } }, - }, - { "movelis", TILEPRO_OPC_MOVELIS, 0x3, 2, TREG_SN, 1, - { { 7, 4 }, { 9, 5 }, { 0, }, { 0, }, { 0, } }, - }, - { "prefetch", TILEPRO_OPC_PREFETCH, 0x12, 1, TREG_ZERO, 1, - { { 0, }, { 10 }, { 0, }, { 0, }, { 15 } }, - }, - { "raise", TILEPRO_OPC_RAISE, 0x2, 0, TREG_ZERO, 1, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "add", TILEPRO_OPC_ADD, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "add.sn", TILEPRO_OPC_ADD_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "addb", TILEPRO_OPC_ADDB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "addb.sn", TILEPRO_OPC_ADDB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "addbs_u", TILEPRO_OPC_ADDBS_U, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "addbs_u.sn", TILEPRO_OPC_ADDBS_U_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "addh", TILEPRO_OPC_ADDH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "addh.sn", TILEPRO_OPC_ADDH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "addhs", TILEPRO_OPC_ADDHS, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "addhs.sn", TILEPRO_OPC_ADDHS_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "addi", TILEPRO_OPC_ADDI, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 11, 12, 2 }, { 13, 14, 3 }, { 0, } }, - }, - { "addi.sn", TILEPRO_OPC_ADDI_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "addib", TILEPRO_OPC_ADDIB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "addib.sn", TILEPRO_OPC_ADDIB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "addih", TILEPRO_OPC_ADDIH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "addih.sn", TILEPRO_OPC_ADDIH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "addli", TILEPRO_OPC_ADDLI, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 4 }, { 9, 10, 5 }, { 0, }, { 0, }, { 0, } }, - }, - { "addli.sn", TILEPRO_OPC_ADDLI_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 4 }, { 9, 10, 5 }, { 0, }, { 0, }, { 0, } }, - }, - { "addlis", TILEPRO_OPC_ADDLIS, 0x3, 3, TREG_SN, 1, - { { 7, 8, 4 }, { 9, 10, 5 }, { 0, }, { 0, }, { 0, } }, - }, - { "adds", TILEPRO_OPC_ADDS, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "adds.sn", TILEPRO_OPC_ADDS_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "adiffb_u", TILEPRO_OPC_ADIFFB_U, 0x1, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "adiffb_u.sn", TILEPRO_OPC_ADIFFB_U_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "adiffh", TILEPRO_OPC_ADIFFH, 0x1, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "adiffh.sn", TILEPRO_OPC_ADIFFH_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "and", TILEPRO_OPC_AND, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "and.sn", TILEPRO_OPC_AND_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "andi", TILEPRO_OPC_ANDI, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 11, 12, 2 }, { 13, 14, 3 }, { 0, } }, - }, - { "andi.sn", TILEPRO_OPC_ANDI_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "auli", TILEPRO_OPC_AULI, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 4 }, { 9, 10, 5 }, { 0, }, { 0, }, { 0, } }, - }, - { "avgb_u", TILEPRO_OPC_AVGB_U, 0x1, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "avgb_u.sn", TILEPRO_OPC_AVGB_U_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "avgh", TILEPRO_OPC_AVGH, 0x1, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "avgh.sn", TILEPRO_OPC_AVGH_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "bbns", TILEPRO_OPC_BBNS, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bbns.sn", TILEPRO_OPC_BBNS_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bbnst", TILEPRO_OPC_BBNST, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bbnst.sn", TILEPRO_OPC_BBNST_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bbs", TILEPRO_OPC_BBS, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bbs.sn", TILEPRO_OPC_BBS_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bbst", TILEPRO_OPC_BBST, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bbst.sn", TILEPRO_OPC_BBST_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bgez", TILEPRO_OPC_BGEZ, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bgez.sn", TILEPRO_OPC_BGEZ_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bgezt", TILEPRO_OPC_BGEZT, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bgezt.sn", TILEPRO_OPC_BGEZT_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bgz", TILEPRO_OPC_BGZ, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bgz.sn", TILEPRO_OPC_BGZ_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bgzt", TILEPRO_OPC_BGZT, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bgzt.sn", TILEPRO_OPC_BGZT_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bitx", TILEPRO_OPC_BITX, 0x5, 2, TREG_ZERO, 1, - { { 7, 8 }, { 0, }, { 11, 12 }, { 0, }, { 0, } }, - }, - { "bitx.sn", TILEPRO_OPC_BITX_SN, 0x1, 2, TREG_SN, 1, - { { 7, 8 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "blez", TILEPRO_OPC_BLEZ, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "blez.sn", TILEPRO_OPC_BLEZ_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "blezt", TILEPRO_OPC_BLEZT, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "blezt.sn", TILEPRO_OPC_BLEZT_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "blz", TILEPRO_OPC_BLZ, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "blz.sn", TILEPRO_OPC_BLZ_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "blzt", TILEPRO_OPC_BLZT, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "blzt.sn", TILEPRO_OPC_BLZT_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bnz", TILEPRO_OPC_BNZ, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bnz.sn", TILEPRO_OPC_BNZ_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bnzt", TILEPRO_OPC_BNZT, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bnzt.sn", TILEPRO_OPC_BNZT_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bytex", TILEPRO_OPC_BYTEX, 0x5, 2, TREG_ZERO, 1, - { { 7, 8 }, { 0, }, { 11, 12 }, { 0, }, { 0, } }, - }, - { "bytex.sn", TILEPRO_OPC_BYTEX_SN, 0x1, 2, TREG_SN, 1, - { { 7, 8 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "bz", TILEPRO_OPC_BZ, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bz.sn", TILEPRO_OPC_BZ_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bzt", TILEPRO_OPC_BZT, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bzt.sn", TILEPRO_OPC_BZT_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "clz", TILEPRO_OPC_CLZ, 0x5, 2, TREG_ZERO, 1, - { { 7, 8 }, { 0, }, { 11, 12 }, { 0, }, { 0, } }, - }, - { "clz.sn", TILEPRO_OPC_CLZ_SN, 0x1, 2, TREG_SN, 1, - { { 7, 8 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "crc32_32", TILEPRO_OPC_CRC32_32, 0x1, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "crc32_32.sn", TILEPRO_OPC_CRC32_32_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "crc32_8", TILEPRO_OPC_CRC32_8, 0x1, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "crc32_8.sn", TILEPRO_OPC_CRC32_8_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "ctz", TILEPRO_OPC_CTZ, 0x5, 2, TREG_ZERO, 1, - { { 7, 8 }, { 0, }, { 11, 12 }, { 0, }, { 0, } }, - }, - { "ctz.sn", TILEPRO_OPC_CTZ_SN, 0x1, 2, TREG_SN, 1, - { { 7, 8 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "drain", TILEPRO_OPC_DRAIN, 0x2, 0, TREG_ZERO, 0, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "dtlbpr", TILEPRO_OPC_DTLBPR, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "dword_align", TILEPRO_OPC_DWORD_ALIGN, 0x1, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "dword_align.sn", TILEPRO_OPC_DWORD_ALIGN_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "finv", TILEPRO_OPC_FINV, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "flush", TILEPRO_OPC_FLUSH, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "fnop", TILEPRO_OPC_FNOP, 0xf, 0, TREG_ZERO, 1, - { { }, { }, { }, { }, { 0, } }, - }, - { "icoh", TILEPRO_OPC_ICOH, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "ill", TILEPRO_OPC_ILL, 0xa, 0, TREG_ZERO, 1, - { { 0, }, { }, { 0, }, { }, { 0, } }, - }, - { "inthb", TILEPRO_OPC_INTHB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "inthb.sn", TILEPRO_OPC_INTHB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "inthh", TILEPRO_OPC_INTHH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "inthh.sn", TILEPRO_OPC_INTHH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "intlb", TILEPRO_OPC_INTLB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "intlb.sn", TILEPRO_OPC_INTLB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "intlh", TILEPRO_OPC_INTLH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "intlh.sn", TILEPRO_OPC_INTLH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "inv", TILEPRO_OPC_INV, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "iret", TILEPRO_OPC_IRET, 0x2, 0, TREG_ZERO, 1, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "jalb", TILEPRO_OPC_JALB, 0x2, 1, TREG_LR, 1, - { { 0, }, { 22 }, { 0, }, { 0, }, { 0, } }, - }, - { "jalf", TILEPRO_OPC_JALF, 0x2, 1, TREG_LR, 1, - { { 0, }, { 22 }, { 0, }, { 0, }, { 0, } }, - }, - { "jalr", TILEPRO_OPC_JALR, 0x2, 1, TREG_LR, 1, - { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "jalrp", TILEPRO_OPC_JALRP, 0x2, 1, TREG_LR, 1, - { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "jb", TILEPRO_OPC_JB, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 22 }, { 0, }, { 0, }, { 0, } }, - }, - { "jf", TILEPRO_OPC_JF, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 22 }, { 0, }, { 0, }, { 0, } }, - }, - { "jr", TILEPRO_OPC_JR, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "jrp", TILEPRO_OPC_JRP, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "lb", TILEPRO_OPC_LB, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 23, 15 } }, - }, - { "lb.sn", TILEPRO_OPC_LB_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "lb_u", TILEPRO_OPC_LB_U, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 23, 15 } }, - }, - { "lb_u.sn", TILEPRO_OPC_LB_U_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "lbadd", TILEPRO_OPC_LBADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "lbadd.sn", TILEPRO_OPC_LBADD_SN, 0x2, 3, TREG_SN, 1, - { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "lbadd_u", TILEPRO_OPC_LBADD_U, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "lbadd_u.sn", TILEPRO_OPC_LBADD_U_SN, 0x2, 3, TREG_SN, 1, - { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "lh", TILEPRO_OPC_LH, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 23, 15 } }, - }, - { "lh.sn", TILEPRO_OPC_LH_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "lh_u", TILEPRO_OPC_LH_U, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 23, 15 } }, - }, - { "lh_u.sn", TILEPRO_OPC_LH_U_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "lhadd", TILEPRO_OPC_LHADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "lhadd.sn", TILEPRO_OPC_LHADD_SN, 0x2, 3, TREG_SN, 1, - { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "lhadd_u", TILEPRO_OPC_LHADD_U, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "lhadd_u.sn", TILEPRO_OPC_LHADD_U_SN, 0x2, 3, TREG_SN, 1, - { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "lnk", TILEPRO_OPC_LNK, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 9 }, { 0, }, { 0, }, { 0, } }, - }, - { "lnk.sn", TILEPRO_OPC_LNK_SN, 0x2, 1, TREG_SN, 1, - { { 0, }, { 9 }, { 0, }, { 0, }, { 0, } }, - }, - { "lw", TILEPRO_OPC_LW, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 23, 15 } }, - }, - { "lw.sn", TILEPRO_OPC_LW_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "lw_na", TILEPRO_OPC_LW_NA, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "lw_na.sn", TILEPRO_OPC_LW_NA_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "lwadd", TILEPRO_OPC_LWADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "lwadd.sn", TILEPRO_OPC_LWADD_SN, 0x2, 3, TREG_SN, 1, - { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "lwadd_na", TILEPRO_OPC_LWADD_NA, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "lwadd_na.sn", TILEPRO_OPC_LWADD_NA_SN, 0x2, 3, TREG_SN, 1, - { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "maxb_u", TILEPRO_OPC_MAXB_U, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "maxb_u.sn", TILEPRO_OPC_MAXB_U_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "maxh", TILEPRO_OPC_MAXH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "maxh.sn", TILEPRO_OPC_MAXH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "maxib_u", TILEPRO_OPC_MAXIB_U, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "maxib_u.sn", TILEPRO_OPC_MAXIB_U_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "maxih", TILEPRO_OPC_MAXIH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "maxih.sn", TILEPRO_OPC_MAXIH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "mf", TILEPRO_OPC_MF, 0x2, 0, TREG_ZERO, 1, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "mfspr", TILEPRO_OPC_MFSPR, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 25 }, { 0, }, { 0, }, { 0, } }, - }, - { "minb_u", TILEPRO_OPC_MINB_U, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "minb_u.sn", TILEPRO_OPC_MINB_U_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "minh", TILEPRO_OPC_MINH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "minh.sn", TILEPRO_OPC_MINH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "minib_u", TILEPRO_OPC_MINIB_U, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "minib_u.sn", TILEPRO_OPC_MINIB_U_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "minih", TILEPRO_OPC_MINIH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "minih.sn", TILEPRO_OPC_MINIH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "mm", TILEPRO_OPC_MM, 0x3, 5, TREG_ZERO, 1, - { { 7, 8, 16, 26, 27 }, { 9, 10, 17, 28, 29 }, { 0, }, { 0, }, { 0, } }, - }, - { "mnz", TILEPRO_OPC_MNZ, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "mnz.sn", TILEPRO_OPC_MNZ_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "mnzb", TILEPRO_OPC_MNZB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "mnzb.sn", TILEPRO_OPC_MNZB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "mnzh", TILEPRO_OPC_MNZH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "mnzh.sn", TILEPRO_OPC_MNZH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "mtspr", TILEPRO_OPC_MTSPR, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 30, 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhh_ss", TILEPRO_OPC_MULHH_SS, 0x5, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 11, 12, 18 }, { 0, }, { 0, } }, - }, - { "mulhh_ss.sn", TILEPRO_OPC_MULHH_SS_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhh_su", TILEPRO_OPC_MULHH_SU, 0x1, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhh_su.sn", TILEPRO_OPC_MULHH_SU_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhh_uu", TILEPRO_OPC_MULHH_UU, 0x5, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 11, 12, 18 }, { 0, }, { 0, } }, - }, - { "mulhh_uu.sn", TILEPRO_OPC_MULHH_UU_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhha_ss", TILEPRO_OPC_MULHHA_SS, 0x5, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } }, - }, - { "mulhha_ss.sn", TILEPRO_OPC_MULHHA_SS_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhha_su", TILEPRO_OPC_MULHHA_SU, 0x1, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhha_su.sn", TILEPRO_OPC_MULHHA_SU_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhha_uu", TILEPRO_OPC_MULHHA_UU, 0x5, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } }, - }, - { "mulhha_uu.sn", TILEPRO_OPC_MULHHA_UU_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhhsa_uu", TILEPRO_OPC_MULHHSA_UU, 0x1, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhhsa_uu.sn", TILEPRO_OPC_MULHHSA_UU_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhl_ss", TILEPRO_OPC_MULHL_SS, 0x1, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhl_ss.sn", TILEPRO_OPC_MULHL_SS_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhl_su", TILEPRO_OPC_MULHL_SU, 0x1, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhl_su.sn", TILEPRO_OPC_MULHL_SU_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhl_us", TILEPRO_OPC_MULHL_US, 0x1, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhl_us.sn", TILEPRO_OPC_MULHL_US_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhl_uu", TILEPRO_OPC_MULHL_UU, 0x1, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhl_uu.sn", TILEPRO_OPC_MULHL_UU_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhla_ss", TILEPRO_OPC_MULHLA_SS, 0x1, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhla_ss.sn", TILEPRO_OPC_MULHLA_SS_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhla_su", TILEPRO_OPC_MULHLA_SU, 0x1, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhla_su.sn", TILEPRO_OPC_MULHLA_SU_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhla_us", TILEPRO_OPC_MULHLA_US, 0x1, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhla_us.sn", TILEPRO_OPC_MULHLA_US_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhla_uu", TILEPRO_OPC_MULHLA_UU, 0x1, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhla_uu.sn", TILEPRO_OPC_MULHLA_UU_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulhlsa_uu", TILEPRO_OPC_MULHLSA_UU, 0x5, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } }, - }, - { "mulhlsa_uu.sn", TILEPRO_OPC_MULHLSA_UU_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulll_ss", TILEPRO_OPC_MULLL_SS, 0x5, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 11, 12, 18 }, { 0, }, { 0, } }, - }, - { "mulll_ss.sn", TILEPRO_OPC_MULLL_SS_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulll_su", TILEPRO_OPC_MULLL_SU, 0x1, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulll_su.sn", TILEPRO_OPC_MULLL_SU_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulll_uu", TILEPRO_OPC_MULLL_UU, 0x5, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 11, 12, 18 }, { 0, }, { 0, } }, - }, - { "mulll_uu.sn", TILEPRO_OPC_MULLL_UU_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mullla_ss", TILEPRO_OPC_MULLLA_SS, 0x5, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } }, - }, - { "mullla_ss.sn", TILEPRO_OPC_MULLLA_SS_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mullla_su", TILEPRO_OPC_MULLLA_SU, 0x1, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mullla_su.sn", TILEPRO_OPC_MULLLA_SU_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mullla_uu", TILEPRO_OPC_MULLLA_UU, 0x5, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } }, - }, - { "mullla_uu.sn", TILEPRO_OPC_MULLLA_UU_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulllsa_uu", TILEPRO_OPC_MULLLSA_UU, 0x1, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mulllsa_uu.sn", TILEPRO_OPC_MULLLSA_UU_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mvnz", TILEPRO_OPC_MVNZ, 0x5, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } }, - }, - { "mvnz.sn", TILEPRO_OPC_MVNZ_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mvz", TILEPRO_OPC_MVZ, 0x5, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } }, - }, - { "mvz.sn", TILEPRO_OPC_MVZ_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mz", TILEPRO_OPC_MZ, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "mz.sn", TILEPRO_OPC_MZ_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "mzb", TILEPRO_OPC_MZB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "mzb.sn", TILEPRO_OPC_MZB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "mzh", TILEPRO_OPC_MZH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "mzh.sn", TILEPRO_OPC_MZH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "nap", TILEPRO_OPC_NAP, 0x2, 0, TREG_ZERO, 0, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "nop", TILEPRO_OPC_NOP, 0xf, 0, TREG_ZERO, 1, - { { }, { }, { }, { }, { 0, } }, - }, - { "nor", TILEPRO_OPC_NOR, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "nor.sn", TILEPRO_OPC_NOR_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "or", TILEPRO_OPC_OR, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "or.sn", TILEPRO_OPC_OR_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "ori", TILEPRO_OPC_ORI, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 11, 12, 2 }, { 13, 14, 3 }, { 0, } }, - }, - { "ori.sn", TILEPRO_OPC_ORI_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "packbs_u", TILEPRO_OPC_PACKBS_U, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "packbs_u.sn", TILEPRO_OPC_PACKBS_U_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "packhb", TILEPRO_OPC_PACKHB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "packhb.sn", TILEPRO_OPC_PACKHB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "packhs", TILEPRO_OPC_PACKHS, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "packhs.sn", TILEPRO_OPC_PACKHS_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "packlb", TILEPRO_OPC_PACKLB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "packlb.sn", TILEPRO_OPC_PACKLB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "pcnt", TILEPRO_OPC_PCNT, 0x5, 2, TREG_ZERO, 1, - { { 7, 8 }, { 0, }, { 11, 12 }, { 0, }, { 0, } }, - }, - { "pcnt.sn", TILEPRO_OPC_PCNT_SN, 0x1, 2, TREG_SN, 1, - { { 7, 8 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "rl", TILEPRO_OPC_RL, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "rl.sn", TILEPRO_OPC_RL_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "rli", TILEPRO_OPC_RLI, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 11, 12, 34 }, { 13, 14, 35 }, { 0, } }, - }, - { "rli.sn", TILEPRO_OPC_RLI_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } }, - }, - { "s1a", TILEPRO_OPC_S1A, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "s1a.sn", TILEPRO_OPC_S1A_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "s2a", TILEPRO_OPC_S2A, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "s2a.sn", TILEPRO_OPC_S2A_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "s3a", TILEPRO_OPC_S3A, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "s3a.sn", TILEPRO_OPC_S3A_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "sadab_u", TILEPRO_OPC_SADAB_U, 0x1, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "sadab_u.sn", TILEPRO_OPC_SADAB_U_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "sadah", TILEPRO_OPC_SADAH, 0x1, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "sadah.sn", TILEPRO_OPC_SADAH_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "sadah_u", TILEPRO_OPC_SADAH_U, 0x1, 3, TREG_ZERO, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "sadah_u.sn", TILEPRO_OPC_SADAH_U_SN, 0x1, 3, TREG_SN, 1, - { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "sadb_u", TILEPRO_OPC_SADB_U, 0x1, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "sadb_u.sn", TILEPRO_OPC_SADB_U_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "sadh", TILEPRO_OPC_SADH, 0x1, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "sadh.sn", TILEPRO_OPC_SADH_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "sadh_u", TILEPRO_OPC_SADH_U, 0x1, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "sadh_u.sn", TILEPRO_OPC_SADH_U_SN, 0x1, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "sb", TILEPRO_OPC_SB, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 10, 17 }, { 0, }, { 0, }, { 15, 36 } }, - }, - { "sbadd", TILEPRO_OPC_SBADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 24, 17, 37 }, { 0, }, { 0, }, { 0, } }, - }, - { "seq", TILEPRO_OPC_SEQ, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "seq.sn", TILEPRO_OPC_SEQ_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "seqb", TILEPRO_OPC_SEQB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "seqb.sn", TILEPRO_OPC_SEQB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "seqh", TILEPRO_OPC_SEQH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "seqh.sn", TILEPRO_OPC_SEQH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "seqi", TILEPRO_OPC_SEQI, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 11, 12, 2 }, { 13, 14, 3 }, { 0, } }, - }, - { "seqi.sn", TILEPRO_OPC_SEQI_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "seqib", TILEPRO_OPC_SEQIB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "seqib.sn", TILEPRO_OPC_SEQIB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "seqih", TILEPRO_OPC_SEQIH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "seqih.sn", TILEPRO_OPC_SEQIH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "sh", TILEPRO_OPC_SH, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 10, 17 }, { 0, }, { 0, }, { 15, 36 } }, - }, - { "shadd", TILEPRO_OPC_SHADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 24, 17, 37 }, { 0, }, { 0, }, { 0, } }, - }, - { "shl", TILEPRO_OPC_SHL, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "shl.sn", TILEPRO_OPC_SHL_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "shlb", TILEPRO_OPC_SHLB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "shlb.sn", TILEPRO_OPC_SHLB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "shlh", TILEPRO_OPC_SHLH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "shlh.sn", TILEPRO_OPC_SHLH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "shli", TILEPRO_OPC_SHLI, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 11, 12, 34 }, { 13, 14, 35 }, { 0, } }, - }, - { "shli.sn", TILEPRO_OPC_SHLI_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } }, - }, - { "shlib", TILEPRO_OPC_SHLIB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } }, - }, - { "shlib.sn", TILEPRO_OPC_SHLIB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } }, - }, - { "shlih", TILEPRO_OPC_SHLIH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } }, - }, - { "shlih.sn", TILEPRO_OPC_SHLIH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } }, - }, - { "shr", TILEPRO_OPC_SHR, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "shr.sn", TILEPRO_OPC_SHR_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "shrb", TILEPRO_OPC_SHRB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "shrb.sn", TILEPRO_OPC_SHRB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "shrh", TILEPRO_OPC_SHRH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "shrh.sn", TILEPRO_OPC_SHRH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "shri", TILEPRO_OPC_SHRI, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 11, 12, 34 }, { 13, 14, 35 }, { 0, } }, - }, - { "shri.sn", TILEPRO_OPC_SHRI_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } }, - }, - { "shrib", TILEPRO_OPC_SHRIB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } }, - }, - { "shrib.sn", TILEPRO_OPC_SHRIB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } }, - }, - { "shrih", TILEPRO_OPC_SHRIH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } }, - }, - { "shrih.sn", TILEPRO_OPC_SHRIH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } }, - }, - { "slt", TILEPRO_OPC_SLT, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "slt.sn", TILEPRO_OPC_SLT_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "slt_u", TILEPRO_OPC_SLT_U, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "slt_u.sn", TILEPRO_OPC_SLT_U_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "sltb", TILEPRO_OPC_SLTB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "sltb.sn", TILEPRO_OPC_SLTB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "sltb_u", TILEPRO_OPC_SLTB_U, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "sltb_u.sn", TILEPRO_OPC_SLTB_U_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "slte", TILEPRO_OPC_SLTE, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "slte.sn", TILEPRO_OPC_SLTE_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "slte_u", TILEPRO_OPC_SLTE_U, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "slte_u.sn", TILEPRO_OPC_SLTE_U_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "slteb", TILEPRO_OPC_SLTEB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "slteb.sn", TILEPRO_OPC_SLTEB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "slteb_u", TILEPRO_OPC_SLTEB_U, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "slteb_u.sn", TILEPRO_OPC_SLTEB_U_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "slteh", TILEPRO_OPC_SLTEH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "slteh.sn", TILEPRO_OPC_SLTEH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "slteh_u", TILEPRO_OPC_SLTEH_U, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "slteh_u.sn", TILEPRO_OPC_SLTEH_U_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "slth", TILEPRO_OPC_SLTH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "slth.sn", TILEPRO_OPC_SLTH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "slth_u", TILEPRO_OPC_SLTH_U, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "slth_u.sn", TILEPRO_OPC_SLTH_U_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "slti", TILEPRO_OPC_SLTI, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 11, 12, 2 }, { 13, 14, 3 }, { 0, } }, - }, - { "slti.sn", TILEPRO_OPC_SLTI_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "slti_u", TILEPRO_OPC_SLTI_U, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 11, 12, 2 }, { 13, 14, 3 }, { 0, } }, - }, - { "slti_u.sn", TILEPRO_OPC_SLTI_U_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "sltib", TILEPRO_OPC_SLTIB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "sltib.sn", TILEPRO_OPC_SLTIB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "sltib_u", TILEPRO_OPC_SLTIB_U, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "sltib_u.sn", TILEPRO_OPC_SLTIB_U_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "sltih", TILEPRO_OPC_SLTIH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "sltih.sn", TILEPRO_OPC_SLTIH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "sltih_u", TILEPRO_OPC_SLTIH_U, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "sltih_u.sn", TILEPRO_OPC_SLTIH_U_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "sne", TILEPRO_OPC_SNE, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "sne.sn", TILEPRO_OPC_SNE_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "sneb", TILEPRO_OPC_SNEB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "sneb.sn", TILEPRO_OPC_SNEB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "sneh", TILEPRO_OPC_SNEH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "sneh.sn", TILEPRO_OPC_SNEH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "sra", TILEPRO_OPC_SRA, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "sra.sn", TILEPRO_OPC_SRA_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "srab", TILEPRO_OPC_SRAB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "srab.sn", TILEPRO_OPC_SRAB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "srah", TILEPRO_OPC_SRAH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "srah.sn", TILEPRO_OPC_SRAH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "srai", TILEPRO_OPC_SRAI, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 11, 12, 34 }, { 13, 14, 35 }, { 0, } }, - }, - { "srai.sn", TILEPRO_OPC_SRAI_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } }, - }, - { "sraib", TILEPRO_OPC_SRAIB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } }, - }, - { "sraib.sn", TILEPRO_OPC_SRAIB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } }, - }, - { "sraih", TILEPRO_OPC_SRAIH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } }, - }, - { "sraih.sn", TILEPRO_OPC_SRAIH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } }, - }, - { "sub", TILEPRO_OPC_SUB, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "sub.sn", TILEPRO_OPC_SUB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "subb", TILEPRO_OPC_SUBB, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "subb.sn", TILEPRO_OPC_SUBB_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "subbs_u", TILEPRO_OPC_SUBBS_U, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "subbs_u.sn", TILEPRO_OPC_SUBBS_U_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "subh", TILEPRO_OPC_SUBH, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "subh.sn", TILEPRO_OPC_SUBH_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "subhs", TILEPRO_OPC_SUBHS, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "subhs.sn", TILEPRO_OPC_SUBHS_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "subs", TILEPRO_OPC_SUBS, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "subs.sn", TILEPRO_OPC_SUBS_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "sw", TILEPRO_OPC_SW, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 10, 17 }, { 0, }, { 0, }, { 15, 36 } }, - }, - { "swadd", TILEPRO_OPC_SWADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 24, 17, 37 }, { 0, }, { 0, }, { 0, } }, - }, - { "swint0", TILEPRO_OPC_SWINT0, 0x2, 0, TREG_ZERO, 0, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "swint1", TILEPRO_OPC_SWINT1, 0x2, 0, TREG_ZERO, 0, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "swint2", TILEPRO_OPC_SWINT2, 0x2, 0, TREG_ZERO, 0, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "swint3", TILEPRO_OPC_SWINT3, 0x2, 0, TREG_ZERO, 0, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "tblidxb0", TILEPRO_OPC_TBLIDXB0, 0x5, 2, TREG_ZERO, 1, - { { 21, 8 }, { 0, }, { 31, 12 }, { 0, }, { 0, } }, - }, - { "tblidxb0.sn", TILEPRO_OPC_TBLIDXB0_SN, 0x1, 2, TREG_SN, 1, - { { 21, 8 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "tblidxb1", TILEPRO_OPC_TBLIDXB1, 0x5, 2, TREG_ZERO, 1, - { { 21, 8 }, { 0, }, { 31, 12 }, { 0, }, { 0, } }, - }, - { "tblidxb1.sn", TILEPRO_OPC_TBLIDXB1_SN, 0x1, 2, TREG_SN, 1, - { { 21, 8 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "tblidxb2", TILEPRO_OPC_TBLIDXB2, 0x5, 2, TREG_ZERO, 1, - { { 21, 8 }, { 0, }, { 31, 12 }, { 0, }, { 0, } }, - }, - { "tblidxb2.sn", TILEPRO_OPC_TBLIDXB2_SN, 0x1, 2, TREG_SN, 1, - { { 21, 8 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "tblidxb3", TILEPRO_OPC_TBLIDXB3, 0x5, 2, TREG_ZERO, 1, - { { 21, 8 }, { 0, }, { 31, 12 }, { 0, }, { 0, } }, - }, - { "tblidxb3.sn", TILEPRO_OPC_TBLIDXB3_SN, 0x1, 2, TREG_SN, 1, - { { 21, 8 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "tns", TILEPRO_OPC_TNS, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "tns.sn", TILEPRO_OPC_TNS_SN, 0x2, 2, TREG_SN, 1, - { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "wh64", TILEPRO_OPC_WH64, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } }, - }, - { "xor", TILEPRO_OPC_XOR, 0xf, 3, TREG_ZERO, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } }, - }, - { "xor.sn", TILEPRO_OPC_XOR_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "xori", TILEPRO_OPC_XORI, 0x3, 3, TREG_ZERO, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "xori.sn", TILEPRO_OPC_XORI_SN, 0x3, 3, TREG_SN, 1, - { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { NULL, TILEPRO_OPC_NONE, 0, 0, TREG_ZERO, 0, { { 0, } }, - } -}; -#define BITFIELD(start, size) ((start) | (((1 << (size)) - 1) << 6)) -#define CHILD(array_index) (TILEPRO_OPC_NONE + (array_index)) - -static const unsigned short decode_X0_fsm[1153] = -{ - BITFIELD(22, 9) /* index 0 */, - CHILD(513), CHILD(530), CHILD(547), CHILD(564), CHILD(596), CHILD(613), - CHILD(630), TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, CHILD(663), CHILD(680), CHILD(697), - CHILD(714), CHILD(746), CHILD(763), CHILD(780), TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), - CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), - CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), - CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), - CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), - CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), - CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), - CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), - CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), - CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), - CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(828), CHILD(828), - CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), - CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), - CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), - CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), - CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), - CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), - CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), - CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), - CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), - CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), - CHILD(828), CHILD(828), CHILD(843), CHILD(843), CHILD(843), CHILD(843), - CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), - CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), - CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), - CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), - CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), - CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), - CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), - CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), - CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), - CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), - CHILD(873), CHILD(878), CHILD(883), CHILD(903), CHILD(908), - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, CHILD(913), - CHILD(918), CHILD(923), CHILD(943), CHILD(948), TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, CHILD(953), TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, CHILD(988), TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, CHILD(993), TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, CHILD(1076), TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - BITFIELD(18, 4) /* index 513 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_ADDB, TILEPRO_OPC_ADDH, TILEPRO_OPC_ADD, - TILEPRO_OPC_ADIFFB_U, TILEPRO_OPC_ADIFFH, TILEPRO_OPC_AND, - TILEPRO_OPC_AVGB_U, TILEPRO_OPC_AVGH, TILEPRO_OPC_CRC32_32, - TILEPRO_OPC_CRC32_8, TILEPRO_OPC_INTHB, TILEPRO_OPC_INTHH, - TILEPRO_OPC_INTLB, TILEPRO_OPC_INTLH, TILEPRO_OPC_MAXB_U, - BITFIELD(18, 4) /* index 530 */, - TILEPRO_OPC_MAXH, TILEPRO_OPC_MINB_U, TILEPRO_OPC_MINH, TILEPRO_OPC_MNZB, - TILEPRO_OPC_MNZH, TILEPRO_OPC_MNZ, TILEPRO_OPC_MULHHA_SS, - TILEPRO_OPC_MULHHA_SU, TILEPRO_OPC_MULHHA_UU, TILEPRO_OPC_MULHHSA_UU, - TILEPRO_OPC_MULHH_SS, TILEPRO_OPC_MULHH_SU, TILEPRO_OPC_MULHH_UU, - TILEPRO_OPC_MULHLA_SS, TILEPRO_OPC_MULHLA_SU, TILEPRO_OPC_MULHLA_US, - BITFIELD(18, 4) /* index 547 */, - TILEPRO_OPC_MULHLA_UU, TILEPRO_OPC_MULHLSA_UU, TILEPRO_OPC_MULHL_SS, - TILEPRO_OPC_MULHL_SU, TILEPRO_OPC_MULHL_US, TILEPRO_OPC_MULHL_UU, - TILEPRO_OPC_MULLLA_SS, TILEPRO_OPC_MULLLA_SU, TILEPRO_OPC_MULLLA_UU, - TILEPRO_OPC_MULLLSA_UU, TILEPRO_OPC_MULLL_SS, TILEPRO_OPC_MULLL_SU, - TILEPRO_OPC_MULLL_UU, TILEPRO_OPC_MVNZ, TILEPRO_OPC_MVZ, TILEPRO_OPC_MZB, - BITFIELD(18, 4) /* index 564 */, - TILEPRO_OPC_MZH, TILEPRO_OPC_MZ, TILEPRO_OPC_NOR, CHILD(581), - TILEPRO_OPC_PACKHB, TILEPRO_OPC_PACKLB, TILEPRO_OPC_RL, TILEPRO_OPC_S1A, - TILEPRO_OPC_S2A, TILEPRO_OPC_S3A, TILEPRO_OPC_SADAB_U, TILEPRO_OPC_SADAH, - TILEPRO_OPC_SADAH_U, TILEPRO_OPC_SADB_U, TILEPRO_OPC_SADH, - TILEPRO_OPC_SADH_U, - BITFIELD(12, 2) /* index 581 */, - TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, CHILD(586), - BITFIELD(14, 2) /* index 586 */, - TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, CHILD(591), - BITFIELD(16, 2) /* index 591 */, - TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_MOVE, - BITFIELD(18, 4) /* index 596 */, - TILEPRO_OPC_SEQB, TILEPRO_OPC_SEQH, TILEPRO_OPC_SEQ, TILEPRO_OPC_SHLB, - TILEPRO_OPC_SHLH, TILEPRO_OPC_SHL, TILEPRO_OPC_SHRB, TILEPRO_OPC_SHRH, - TILEPRO_OPC_SHR, TILEPRO_OPC_SLTB, TILEPRO_OPC_SLTB_U, TILEPRO_OPC_SLTEB, - TILEPRO_OPC_SLTEB_U, TILEPRO_OPC_SLTEH, TILEPRO_OPC_SLTEH_U, - TILEPRO_OPC_SLTE, - BITFIELD(18, 4) /* index 613 */, - TILEPRO_OPC_SLTE_U, TILEPRO_OPC_SLTH, TILEPRO_OPC_SLTH_U, TILEPRO_OPC_SLT, - TILEPRO_OPC_SLT_U, TILEPRO_OPC_SNEB, TILEPRO_OPC_SNEH, TILEPRO_OPC_SNE, - TILEPRO_OPC_SRAB, TILEPRO_OPC_SRAH, TILEPRO_OPC_SRA, TILEPRO_OPC_SUBB, - TILEPRO_OPC_SUBH, TILEPRO_OPC_SUB, TILEPRO_OPC_XOR, TILEPRO_OPC_DWORD_ALIGN, - BITFIELD(18, 3) /* index 630 */, - CHILD(639), CHILD(642), CHILD(645), CHILD(648), CHILD(651), CHILD(654), - CHILD(657), CHILD(660), - BITFIELD(21, 1) /* index 639 */, - TILEPRO_OPC_ADDS, TILEPRO_OPC_NONE, - BITFIELD(21, 1) /* index 642 */, - TILEPRO_OPC_SUBS, TILEPRO_OPC_NONE, - BITFIELD(21, 1) /* index 645 */, - TILEPRO_OPC_ADDBS_U, TILEPRO_OPC_NONE, - BITFIELD(21, 1) /* index 648 */, - TILEPRO_OPC_ADDHS, TILEPRO_OPC_NONE, - BITFIELD(21, 1) /* index 651 */, - TILEPRO_OPC_SUBBS_U, TILEPRO_OPC_NONE, - BITFIELD(21, 1) /* index 654 */, - TILEPRO_OPC_SUBHS, TILEPRO_OPC_NONE, - BITFIELD(21, 1) /* index 657 */, - TILEPRO_OPC_PACKHS, TILEPRO_OPC_NONE, - BITFIELD(21, 1) /* index 660 */, - TILEPRO_OPC_PACKBS_U, TILEPRO_OPC_NONE, - BITFIELD(18, 4) /* index 663 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_ADDB_SN, TILEPRO_OPC_ADDH_SN, - TILEPRO_OPC_ADD_SN, TILEPRO_OPC_ADIFFB_U_SN, TILEPRO_OPC_ADIFFH_SN, - TILEPRO_OPC_AND_SN, TILEPRO_OPC_AVGB_U_SN, TILEPRO_OPC_AVGH_SN, - TILEPRO_OPC_CRC32_32_SN, TILEPRO_OPC_CRC32_8_SN, TILEPRO_OPC_INTHB_SN, - TILEPRO_OPC_INTHH_SN, TILEPRO_OPC_INTLB_SN, TILEPRO_OPC_INTLH_SN, - TILEPRO_OPC_MAXB_U_SN, - BITFIELD(18, 4) /* index 680 */, - TILEPRO_OPC_MAXH_SN, TILEPRO_OPC_MINB_U_SN, TILEPRO_OPC_MINH_SN, - TILEPRO_OPC_MNZB_SN, TILEPRO_OPC_MNZH_SN, TILEPRO_OPC_MNZ_SN, - TILEPRO_OPC_MULHHA_SS_SN, TILEPRO_OPC_MULHHA_SU_SN, - TILEPRO_OPC_MULHHA_UU_SN, TILEPRO_OPC_MULHHSA_UU_SN, - TILEPRO_OPC_MULHH_SS_SN, TILEPRO_OPC_MULHH_SU_SN, TILEPRO_OPC_MULHH_UU_SN, - TILEPRO_OPC_MULHLA_SS_SN, TILEPRO_OPC_MULHLA_SU_SN, - TILEPRO_OPC_MULHLA_US_SN, - BITFIELD(18, 4) /* index 697 */, - TILEPRO_OPC_MULHLA_UU_SN, TILEPRO_OPC_MULHLSA_UU_SN, - TILEPRO_OPC_MULHL_SS_SN, TILEPRO_OPC_MULHL_SU_SN, TILEPRO_OPC_MULHL_US_SN, - TILEPRO_OPC_MULHL_UU_SN, TILEPRO_OPC_MULLLA_SS_SN, TILEPRO_OPC_MULLLA_SU_SN, - TILEPRO_OPC_MULLLA_UU_SN, TILEPRO_OPC_MULLLSA_UU_SN, - TILEPRO_OPC_MULLL_SS_SN, TILEPRO_OPC_MULLL_SU_SN, TILEPRO_OPC_MULLL_UU_SN, - TILEPRO_OPC_MVNZ_SN, TILEPRO_OPC_MVZ_SN, TILEPRO_OPC_MZB_SN, - BITFIELD(18, 4) /* index 714 */, - TILEPRO_OPC_MZH_SN, TILEPRO_OPC_MZ_SN, TILEPRO_OPC_NOR_SN, CHILD(731), - TILEPRO_OPC_PACKHB_SN, TILEPRO_OPC_PACKLB_SN, TILEPRO_OPC_RL_SN, - TILEPRO_OPC_S1A_SN, TILEPRO_OPC_S2A_SN, TILEPRO_OPC_S3A_SN, - TILEPRO_OPC_SADAB_U_SN, TILEPRO_OPC_SADAH_SN, TILEPRO_OPC_SADAH_U_SN, - TILEPRO_OPC_SADB_U_SN, TILEPRO_OPC_SADH_SN, TILEPRO_OPC_SADH_U_SN, - BITFIELD(12, 2) /* index 731 */, - TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, CHILD(736), - BITFIELD(14, 2) /* index 736 */, - TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, CHILD(741), - BITFIELD(16, 2) /* index 741 */, - TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, - TILEPRO_OPC_MOVE_SN, - BITFIELD(18, 4) /* index 746 */, - TILEPRO_OPC_SEQB_SN, TILEPRO_OPC_SEQH_SN, TILEPRO_OPC_SEQ_SN, - TILEPRO_OPC_SHLB_SN, TILEPRO_OPC_SHLH_SN, TILEPRO_OPC_SHL_SN, - TILEPRO_OPC_SHRB_SN, TILEPRO_OPC_SHRH_SN, TILEPRO_OPC_SHR_SN, - TILEPRO_OPC_SLTB_SN, TILEPRO_OPC_SLTB_U_SN, TILEPRO_OPC_SLTEB_SN, - TILEPRO_OPC_SLTEB_U_SN, TILEPRO_OPC_SLTEH_SN, TILEPRO_OPC_SLTEH_U_SN, - TILEPRO_OPC_SLTE_SN, - BITFIELD(18, 4) /* index 763 */, - TILEPRO_OPC_SLTE_U_SN, TILEPRO_OPC_SLTH_SN, TILEPRO_OPC_SLTH_U_SN, - TILEPRO_OPC_SLT_SN, TILEPRO_OPC_SLT_U_SN, TILEPRO_OPC_SNEB_SN, - TILEPRO_OPC_SNEH_SN, TILEPRO_OPC_SNE_SN, TILEPRO_OPC_SRAB_SN, - TILEPRO_OPC_SRAH_SN, TILEPRO_OPC_SRA_SN, TILEPRO_OPC_SUBB_SN, - TILEPRO_OPC_SUBH_SN, TILEPRO_OPC_SUB_SN, TILEPRO_OPC_XOR_SN, - TILEPRO_OPC_DWORD_ALIGN_SN, - BITFIELD(18, 3) /* index 780 */, - CHILD(789), CHILD(792), CHILD(795), CHILD(798), CHILD(801), CHILD(804), - CHILD(807), CHILD(810), - BITFIELD(21, 1) /* index 789 */, - TILEPRO_OPC_ADDS_SN, TILEPRO_OPC_NONE, - BITFIELD(21, 1) /* index 792 */, - TILEPRO_OPC_SUBS_SN, TILEPRO_OPC_NONE, - BITFIELD(21, 1) /* index 795 */, - TILEPRO_OPC_ADDBS_U_SN, TILEPRO_OPC_NONE, - BITFIELD(21, 1) /* index 798 */, - TILEPRO_OPC_ADDHS_SN, TILEPRO_OPC_NONE, - BITFIELD(21, 1) /* index 801 */, - TILEPRO_OPC_SUBBS_U_SN, TILEPRO_OPC_NONE, - BITFIELD(21, 1) /* index 804 */, - TILEPRO_OPC_SUBHS_SN, TILEPRO_OPC_NONE, - BITFIELD(21, 1) /* index 807 */, - TILEPRO_OPC_PACKHS_SN, TILEPRO_OPC_NONE, - BITFIELD(21, 1) /* index 810 */, - TILEPRO_OPC_PACKBS_U_SN, TILEPRO_OPC_NONE, - BITFIELD(6, 2) /* index 813 */, - TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN, - CHILD(818), - BITFIELD(8, 2) /* index 818 */, - TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN, - CHILD(823), - BITFIELD(10, 2) /* index 823 */, - TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN, - TILEPRO_OPC_MOVELI_SN, - BITFIELD(6, 2) /* index 828 */, - TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, CHILD(833), - BITFIELD(8, 2) /* index 833 */, - TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, CHILD(838), - BITFIELD(10, 2) /* index 838 */, - TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, TILEPRO_OPC_MOVELI, - BITFIELD(0, 2) /* index 843 */, - TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(848), - BITFIELD(2, 2) /* index 848 */, - TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(853), - BITFIELD(4, 2) /* index 853 */, - TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(858), - BITFIELD(6, 2) /* index 858 */, - TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(863), - BITFIELD(8, 2) /* index 863 */, - TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(868), - BITFIELD(10, 2) /* index 868 */, - TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_INFOL, - BITFIELD(20, 2) /* index 873 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_ADDIB, TILEPRO_OPC_ADDIH, TILEPRO_OPC_ADDI, - BITFIELD(20, 2) /* index 878 */, - TILEPRO_OPC_MAXIB_U, TILEPRO_OPC_MAXIH, TILEPRO_OPC_MINIB_U, - TILEPRO_OPC_MINIH, - BITFIELD(20, 2) /* index 883 */, - CHILD(888), TILEPRO_OPC_SEQIB, TILEPRO_OPC_SEQIH, TILEPRO_OPC_SEQI, - BITFIELD(6, 2) /* index 888 */, - TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, CHILD(893), - BITFIELD(8, 2) /* index 893 */, - TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, CHILD(898), - BITFIELD(10, 2) /* index 898 */, - TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_MOVEI, - BITFIELD(20, 2) /* index 903 */, - TILEPRO_OPC_SLTIB, TILEPRO_OPC_SLTIB_U, TILEPRO_OPC_SLTIH, - TILEPRO_OPC_SLTIH_U, - BITFIELD(20, 2) /* index 908 */, - TILEPRO_OPC_SLTI, TILEPRO_OPC_SLTI_U, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - BITFIELD(20, 2) /* index 913 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_ADDIB_SN, TILEPRO_OPC_ADDIH_SN, - TILEPRO_OPC_ADDI_SN, - BITFIELD(20, 2) /* index 918 */, - TILEPRO_OPC_MAXIB_U_SN, TILEPRO_OPC_MAXIH_SN, TILEPRO_OPC_MINIB_U_SN, - TILEPRO_OPC_MINIH_SN, - BITFIELD(20, 2) /* index 923 */, - CHILD(928), TILEPRO_OPC_SEQIB_SN, TILEPRO_OPC_SEQIH_SN, TILEPRO_OPC_SEQI_SN, - BITFIELD(6, 2) /* index 928 */, - TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, CHILD(933), - BITFIELD(8, 2) /* index 933 */, - TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, CHILD(938), - BITFIELD(10, 2) /* index 938 */, - TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, - TILEPRO_OPC_MOVEI_SN, - BITFIELD(20, 2) /* index 943 */, - TILEPRO_OPC_SLTIB_SN, TILEPRO_OPC_SLTIB_U_SN, TILEPRO_OPC_SLTIH_SN, - TILEPRO_OPC_SLTIH_U_SN, - BITFIELD(20, 2) /* index 948 */, - TILEPRO_OPC_SLTI_SN, TILEPRO_OPC_SLTI_U_SN, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, - BITFIELD(20, 2) /* index 953 */, - TILEPRO_OPC_NONE, CHILD(958), TILEPRO_OPC_XORI, TILEPRO_OPC_NONE, - BITFIELD(0, 2) /* index 958 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(963), - BITFIELD(2, 2) /* index 963 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(968), - BITFIELD(4, 2) /* index 968 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(973), - BITFIELD(6, 2) /* index 973 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(978), - BITFIELD(8, 2) /* index 978 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(983), - BITFIELD(10, 2) /* index 983 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_INFO, - BITFIELD(20, 2) /* index 988 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_ANDI_SN, TILEPRO_OPC_XORI_SN, - TILEPRO_OPC_NONE, - BITFIELD(17, 5) /* index 993 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_RLI, TILEPRO_OPC_SHLIB, TILEPRO_OPC_SHLIH, - TILEPRO_OPC_SHLI, TILEPRO_OPC_SHRIB, TILEPRO_OPC_SHRIH, TILEPRO_OPC_SHRI, - TILEPRO_OPC_SRAIB, TILEPRO_OPC_SRAIH, TILEPRO_OPC_SRAI, CHILD(1026), - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - BITFIELD(12, 4) /* index 1026 */, - TILEPRO_OPC_NONE, CHILD(1043), CHILD(1046), CHILD(1049), CHILD(1052), - CHILD(1055), CHILD(1058), CHILD(1061), CHILD(1064), CHILD(1067), - CHILD(1070), CHILD(1073), TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1043 */, - TILEPRO_OPC_BITX, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1046 */, - TILEPRO_OPC_BYTEX, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1049 */, - TILEPRO_OPC_CLZ, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1052 */, - TILEPRO_OPC_CTZ, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1055 */, - TILEPRO_OPC_FNOP, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1058 */, - TILEPRO_OPC_NOP, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1061 */, - TILEPRO_OPC_PCNT, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1064 */, - TILEPRO_OPC_TBLIDXB0, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1067 */, - TILEPRO_OPC_TBLIDXB1, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1070 */, - TILEPRO_OPC_TBLIDXB2, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1073 */, - TILEPRO_OPC_TBLIDXB3, TILEPRO_OPC_NONE, - BITFIELD(17, 5) /* index 1076 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_RLI_SN, TILEPRO_OPC_SHLIB_SN, - TILEPRO_OPC_SHLIH_SN, TILEPRO_OPC_SHLI_SN, TILEPRO_OPC_SHRIB_SN, - TILEPRO_OPC_SHRIH_SN, TILEPRO_OPC_SHRI_SN, TILEPRO_OPC_SRAIB_SN, - TILEPRO_OPC_SRAIH_SN, TILEPRO_OPC_SRAI_SN, CHILD(1109), TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - BITFIELD(12, 4) /* index 1109 */, - TILEPRO_OPC_NONE, CHILD(1126), CHILD(1129), CHILD(1132), CHILD(1135), - CHILD(1055), CHILD(1058), CHILD(1138), CHILD(1141), CHILD(1144), - CHILD(1147), CHILD(1150), TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1126 */, - TILEPRO_OPC_BITX_SN, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1129 */, - TILEPRO_OPC_BYTEX_SN, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1132 */, - TILEPRO_OPC_CLZ_SN, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1135 */, - TILEPRO_OPC_CTZ_SN, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1138 */, - TILEPRO_OPC_PCNT_SN, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1141 */, - TILEPRO_OPC_TBLIDXB0_SN, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1144 */, - TILEPRO_OPC_TBLIDXB1_SN, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1147 */, - TILEPRO_OPC_TBLIDXB2_SN, TILEPRO_OPC_NONE, - BITFIELD(16, 1) /* index 1150 */, - TILEPRO_OPC_TBLIDXB3_SN, TILEPRO_OPC_NONE, -}; - -static const unsigned short decode_X1_fsm[1540] = -{ - BITFIELD(54, 9) /* index 0 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - CHILD(513), CHILD(561), CHILD(594), TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, CHILD(641), - CHILD(689), CHILD(722), TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, CHILD(766), - CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), - CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), - CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), - CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), - CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), - CHILD(766), CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781), - CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781), - CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781), - CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781), - CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781), - CHILD(781), CHILD(781), CHILD(781), CHILD(796), CHILD(796), CHILD(796), - CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), - CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), - CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), - CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), - CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(826), - CHILD(826), CHILD(826), CHILD(826), CHILD(826), CHILD(826), CHILD(826), - CHILD(826), CHILD(826), CHILD(826), CHILD(826), CHILD(826), CHILD(826), - CHILD(826), CHILD(826), CHILD(826), CHILD(843), CHILD(843), CHILD(843), - CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), - CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), - CHILD(843), CHILD(860), CHILD(899), CHILD(923), CHILD(932), - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - CHILD(941), CHILD(950), CHILD(974), CHILD(983), TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, - TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, CHILD(992), - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, CHILD(1334), - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_J, - TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, - TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, - TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, - TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, - TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, - TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, - TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, - TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, - TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, - TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, - TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, - TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, - TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_JAL, - TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, - TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, - TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, - TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, - TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, - TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, - TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, - TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, - TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, - TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, - TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, - TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, - TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, - TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, - TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, - TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - BITFIELD(49, 5) /* index 513 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_ADDB, TILEPRO_OPC_ADDH, TILEPRO_OPC_ADD, - TILEPRO_OPC_AND, TILEPRO_OPC_INTHB, TILEPRO_OPC_INTHH, TILEPRO_OPC_INTLB, - TILEPRO_OPC_INTLH, TILEPRO_OPC_JALRP, TILEPRO_OPC_JALR, TILEPRO_OPC_JRP, - TILEPRO_OPC_JR, TILEPRO_OPC_LNK, TILEPRO_OPC_MAXB_U, TILEPRO_OPC_MAXH, - TILEPRO_OPC_MINB_U, TILEPRO_OPC_MINH, TILEPRO_OPC_MNZB, TILEPRO_OPC_MNZH, - TILEPRO_OPC_MNZ, TILEPRO_OPC_MZB, TILEPRO_OPC_MZH, TILEPRO_OPC_MZ, - TILEPRO_OPC_NOR, CHILD(546), TILEPRO_OPC_PACKHB, TILEPRO_OPC_PACKLB, - TILEPRO_OPC_RL, TILEPRO_OPC_S1A, TILEPRO_OPC_S2A, TILEPRO_OPC_S3A, - BITFIELD(43, 2) /* index 546 */, - TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, CHILD(551), - BITFIELD(45, 2) /* index 551 */, - TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, CHILD(556), - BITFIELD(47, 2) /* index 556 */, - TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_MOVE, - BITFIELD(49, 5) /* index 561 */, - TILEPRO_OPC_SB, TILEPRO_OPC_SEQB, TILEPRO_OPC_SEQH, TILEPRO_OPC_SEQ, - TILEPRO_OPC_SHLB, TILEPRO_OPC_SHLH, TILEPRO_OPC_SHL, TILEPRO_OPC_SHRB, - TILEPRO_OPC_SHRH, TILEPRO_OPC_SHR, TILEPRO_OPC_SH, TILEPRO_OPC_SLTB, - TILEPRO_OPC_SLTB_U, TILEPRO_OPC_SLTEB, TILEPRO_OPC_SLTEB_U, - TILEPRO_OPC_SLTEH, TILEPRO_OPC_SLTEH_U, TILEPRO_OPC_SLTE, - TILEPRO_OPC_SLTE_U, TILEPRO_OPC_SLTH, TILEPRO_OPC_SLTH_U, TILEPRO_OPC_SLT, - TILEPRO_OPC_SLT_U, TILEPRO_OPC_SNEB, TILEPRO_OPC_SNEH, TILEPRO_OPC_SNE, - TILEPRO_OPC_SRAB, TILEPRO_OPC_SRAH, TILEPRO_OPC_SRA, TILEPRO_OPC_SUBB, - TILEPRO_OPC_SUBH, TILEPRO_OPC_SUB, - BITFIELD(49, 4) /* index 594 */, - CHILD(611), CHILD(614), CHILD(617), CHILD(620), CHILD(623), CHILD(626), - CHILD(629), CHILD(632), CHILD(635), CHILD(638), TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 611 */, - TILEPRO_OPC_SW, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 614 */, - TILEPRO_OPC_XOR, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 617 */, - TILEPRO_OPC_ADDS, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 620 */, - TILEPRO_OPC_SUBS, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 623 */, - TILEPRO_OPC_ADDBS_U, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 626 */, - TILEPRO_OPC_ADDHS, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 629 */, - TILEPRO_OPC_SUBBS_U, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 632 */, - TILEPRO_OPC_SUBHS, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 635 */, - TILEPRO_OPC_PACKHS, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 638 */, - TILEPRO_OPC_PACKBS_U, TILEPRO_OPC_NONE, - BITFIELD(49, 5) /* index 641 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_ADDB_SN, TILEPRO_OPC_ADDH_SN, - TILEPRO_OPC_ADD_SN, TILEPRO_OPC_AND_SN, TILEPRO_OPC_INTHB_SN, - TILEPRO_OPC_INTHH_SN, TILEPRO_OPC_INTLB_SN, TILEPRO_OPC_INTLH_SN, - TILEPRO_OPC_JALRP, TILEPRO_OPC_JALR, TILEPRO_OPC_JRP, TILEPRO_OPC_JR, - TILEPRO_OPC_LNK_SN, TILEPRO_OPC_MAXB_U_SN, TILEPRO_OPC_MAXH_SN, - TILEPRO_OPC_MINB_U_SN, TILEPRO_OPC_MINH_SN, TILEPRO_OPC_MNZB_SN, - TILEPRO_OPC_MNZH_SN, TILEPRO_OPC_MNZ_SN, TILEPRO_OPC_MZB_SN, - TILEPRO_OPC_MZH_SN, TILEPRO_OPC_MZ_SN, TILEPRO_OPC_NOR_SN, CHILD(674), - TILEPRO_OPC_PACKHB_SN, TILEPRO_OPC_PACKLB_SN, TILEPRO_OPC_RL_SN, - TILEPRO_OPC_S1A_SN, TILEPRO_OPC_S2A_SN, TILEPRO_OPC_S3A_SN, - BITFIELD(43, 2) /* index 674 */, - TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, CHILD(679), - BITFIELD(45, 2) /* index 679 */, - TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, CHILD(684), - BITFIELD(47, 2) /* index 684 */, - TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, - TILEPRO_OPC_MOVE_SN, - BITFIELD(49, 5) /* index 689 */, - TILEPRO_OPC_SB, TILEPRO_OPC_SEQB_SN, TILEPRO_OPC_SEQH_SN, - TILEPRO_OPC_SEQ_SN, TILEPRO_OPC_SHLB_SN, TILEPRO_OPC_SHLH_SN, - TILEPRO_OPC_SHL_SN, TILEPRO_OPC_SHRB_SN, TILEPRO_OPC_SHRH_SN, - TILEPRO_OPC_SHR_SN, TILEPRO_OPC_SH, TILEPRO_OPC_SLTB_SN, - TILEPRO_OPC_SLTB_U_SN, TILEPRO_OPC_SLTEB_SN, TILEPRO_OPC_SLTEB_U_SN, - TILEPRO_OPC_SLTEH_SN, TILEPRO_OPC_SLTEH_U_SN, TILEPRO_OPC_SLTE_SN, - TILEPRO_OPC_SLTE_U_SN, TILEPRO_OPC_SLTH_SN, TILEPRO_OPC_SLTH_U_SN, - TILEPRO_OPC_SLT_SN, TILEPRO_OPC_SLT_U_SN, TILEPRO_OPC_SNEB_SN, - TILEPRO_OPC_SNEH_SN, TILEPRO_OPC_SNE_SN, TILEPRO_OPC_SRAB_SN, - TILEPRO_OPC_SRAH_SN, TILEPRO_OPC_SRA_SN, TILEPRO_OPC_SUBB_SN, - TILEPRO_OPC_SUBH_SN, TILEPRO_OPC_SUB_SN, - BITFIELD(49, 4) /* index 722 */, - CHILD(611), CHILD(739), CHILD(742), CHILD(745), CHILD(748), CHILD(751), - CHILD(754), CHILD(757), CHILD(760), CHILD(763), TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 739 */, - TILEPRO_OPC_XOR_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 742 */, - TILEPRO_OPC_ADDS_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 745 */, - TILEPRO_OPC_SUBS_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 748 */, - TILEPRO_OPC_ADDBS_U_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 751 */, - TILEPRO_OPC_ADDHS_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 754 */, - TILEPRO_OPC_SUBBS_U_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 757 */, - TILEPRO_OPC_SUBHS_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 760 */, - TILEPRO_OPC_PACKHS_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 763 */, - TILEPRO_OPC_PACKBS_U_SN, TILEPRO_OPC_NONE, - BITFIELD(37, 2) /* index 766 */, - TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN, - CHILD(771), - BITFIELD(39, 2) /* index 771 */, - TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN, - CHILD(776), - BITFIELD(41, 2) /* index 776 */, - TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN, - TILEPRO_OPC_MOVELI_SN, - BITFIELD(37, 2) /* index 781 */, - TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, CHILD(786), - BITFIELD(39, 2) /* index 786 */, - TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, CHILD(791), - BITFIELD(41, 2) /* index 791 */, - TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, TILEPRO_OPC_MOVELI, - BITFIELD(31, 2) /* index 796 */, - TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(801), - BITFIELD(33, 2) /* index 801 */, - TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(806), - BITFIELD(35, 2) /* index 806 */, - TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(811), - BITFIELD(37, 2) /* index 811 */, - TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(816), - BITFIELD(39, 2) /* index 816 */, - TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(821), - BITFIELD(41, 2) /* index 821 */, - TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_INFOL, - BITFIELD(31, 4) /* index 826 */, - TILEPRO_OPC_BZ, TILEPRO_OPC_BZT, TILEPRO_OPC_BNZ, TILEPRO_OPC_BNZT, - TILEPRO_OPC_BGZ, TILEPRO_OPC_BGZT, TILEPRO_OPC_BGEZ, TILEPRO_OPC_BGEZT, - TILEPRO_OPC_BLZ, TILEPRO_OPC_BLZT, TILEPRO_OPC_BLEZ, TILEPRO_OPC_BLEZT, - TILEPRO_OPC_BBS, TILEPRO_OPC_BBST, TILEPRO_OPC_BBNS, TILEPRO_OPC_BBNST, - BITFIELD(31, 4) /* index 843 */, - TILEPRO_OPC_BZ_SN, TILEPRO_OPC_BZT_SN, TILEPRO_OPC_BNZ_SN, - TILEPRO_OPC_BNZT_SN, TILEPRO_OPC_BGZ_SN, TILEPRO_OPC_BGZT_SN, - TILEPRO_OPC_BGEZ_SN, TILEPRO_OPC_BGEZT_SN, TILEPRO_OPC_BLZ_SN, - TILEPRO_OPC_BLZT_SN, TILEPRO_OPC_BLEZ_SN, TILEPRO_OPC_BLEZT_SN, - TILEPRO_OPC_BBS_SN, TILEPRO_OPC_BBST_SN, TILEPRO_OPC_BBNS_SN, - TILEPRO_OPC_BBNST_SN, - BITFIELD(51, 3) /* index 860 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_ADDIB, TILEPRO_OPC_ADDIH, TILEPRO_OPC_ADDI, - CHILD(869), TILEPRO_OPC_MAXIB_U, TILEPRO_OPC_MAXIH, TILEPRO_OPC_MFSPR, - BITFIELD(31, 2) /* index 869 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(874), - BITFIELD(33, 2) /* index 874 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(879), - BITFIELD(35, 2) /* index 879 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(884), - BITFIELD(37, 2) /* index 884 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(889), - BITFIELD(39, 2) /* index 889 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(894), - BITFIELD(41, 2) /* index 894 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_INFO, - BITFIELD(51, 3) /* index 899 */, - TILEPRO_OPC_MINIB_U, TILEPRO_OPC_MINIH, TILEPRO_OPC_MTSPR, CHILD(908), - TILEPRO_OPC_SEQIB, TILEPRO_OPC_SEQIH, TILEPRO_OPC_SEQI, TILEPRO_OPC_SLTIB, - BITFIELD(37, 2) /* index 908 */, - TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, CHILD(913), - BITFIELD(39, 2) /* index 913 */, - TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, CHILD(918), - BITFIELD(41, 2) /* index 918 */, - TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_MOVEI, - BITFIELD(51, 3) /* index 923 */, - TILEPRO_OPC_SLTIB_U, TILEPRO_OPC_SLTIH, TILEPRO_OPC_SLTIH_U, - TILEPRO_OPC_SLTI, TILEPRO_OPC_SLTI_U, TILEPRO_OPC_XORI, TILEPRO_OPC_LBADD, - TILEPRO_OPC_LBADD_U, - BITFIELD(51, 3) /* index 932 */, - TILEPRO_OPC_LHADD, TILEPRO_OPC_LHADD_U, TILEPRO_OPC_LWADD, - TILEPRO_OPC_LWADD_NA, TILEPRO_OPC_SBADD, TILEPRO_OPC_SHADD, - TILEPRO_OPC_SWADD, TILEPRO_OPC_NONE, - BITFIELD(51, 3) /* index 941 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_ADDIB_SN, TILEPRO_OPC_ADDIH_SN, - TILEPRO_OPC_ADDI_SN, TILEPRO_OPC_ANDI_SN, TILEPRO_OPC_MAXIB_U_SN, - TILEPRO_OPC_MAXIH_SN, TILEPRO_OPC_MFSPR, - BITFIELD(51, 3) /* index 950 */, - TILEPRO_OPC_MINIB_U_SN, TILEPRO_OPC_MINIH_SN, TILEPRO_OPC_MTSPR, CHILD(959), - TILEPRO_OPC_SEQIB_SN, TILEPRO_OPC_SEQIH_SN, TILEPRO_OPC_SEQI_SN, - TILEPRO_OPC_SLTIB_SN, - BITFIELD(37, 2) /* index 959 */, - TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, CHILD(964), - BITFIELD(39, 2) /* index 964 */, - TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, CHILD(969), - BITFIELD(41, 2) /* index 969 */, - TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, - TILEPRO_OPC_MOVEI_SN, - BITFIELD(51, 3) /* index 974 */, - TILEPRO_OPC_SLTIB_U_SN, TILEPRO_OPC_SLTIH_SN, TILEPRO_OPC_SLTIH_U_SN, - TILEPRO_OPC_SLTI_SN, TILEPRO_OPC_SLTI_U_SN, TILEPRO_OPC_XORI_SN, - TILEPRO_OPC_LBADD_SN, TILEPRO_OPC_LBADD_U_SN, - BITFIELD(51, 3) /* index 983 */, - TILEPRO_OPC_LHADD_SN, TILEPRO_OPC_LHADD_U_SN, TILEPRO_OPC_LWADD_SN, - TILEPRO_OPC_LWADD_NA_SN, TILEPRO_OPC_SBADD, TILEPRO_OPC_SHADD, - TILEPRO_OPC_SWADD, TILEPRO_OPC_NONE, - BITFIELD(46, 7) /* index 992 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - CHILD(1121), CHILD(1121), CHILD(1121), CHILD(1121), CHILD(1124), - CHILD(1124), CHILD(1124), CHILD(1124), CHILD(1127), CHILD(1127), - CHILD(1127), CHILD(1127), CHILD(1130), CHILD(1130), CHILD(1130), - CHILD(1130), CHILD(1133), CHILD(1133), CHILD(1133), CHILD(1133), - CHILD(1136), CHILD(1136), CHILD(1136), CHILD(1136), CHILD(1139), - CHILD(1139), CHILD(1139), CHILD(1139), CHILD(1142), CHILD(1142), - CHILD(1142), CHILD(1142), CHILD(1145), CHILD(1145), CHILD(1145), - CHILD(1145), CHILD(1148), CHILD(1148), CHILD(1148), CHILD(1148), - CHILD(1151), CHILD(1242), CHILD(1290), CHILD(1323), TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1121 */, - TILEPRO_OPC_RLI, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1124 */, - TILEPRO_OPC_SHLIB, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1127 */, - TILEPRO_OPC_SHLIH, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1130 */, - TILEPRO_OPC_SHLI, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1133 */, - TILEPRO_OPC_SHRIB, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1136 */, - TILEPRO_OPC_SHRIH, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1139 */, - TILEPRO_OPC_SHRI, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1142 */, - TILEPRO_OPC_SRAIB, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1145 */, - TILEPRO_OPC_SRAIH, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1148 */, - TILEPRO_OPC_SRAI, TILEPRO_OPC_NONE, - BITFIELD(43, 3) /* index 1151 */, - TILEPRO_OPC_NONE, CHILD(1160), CHILD(1163), CHILD(1166), CHILD(1169), - CHILD(1172), CHILD(1175), CHILD(1178), - BITFIELD(53, 1) /* index 1160 */, - TILEPRO_OPC_DRAIN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1163 */, - TILEPRO_OPC_DTLBPR, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1166 */, - TILEPRO_OPC_FINV, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1169 */, - TILEPRO_OPC_FLUSH, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1172 */, - TILEPRO_OPC_FNOP, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1175 */, - TILEPRO_OPC_ICOH, TILEPRO_OPC_NONE, - BITFIELD(31, 2) /* index 1178 */, - CHILD(1183), CHILD(1211), CHILD(1239), CHILD(1239), - BITFIELD(53, 1) /* index 1183 */, - CHILD(1186), TILEPRO_OPC_NONE, - BITFIELD(33, 2) /* index 1186 */, - TILEPRO_OPC_ILL, TILEPRO_OPC_ILL, TILEPRO_OPC_ILL, CHILD(1191), - BITFIELD(35, 2) /* index 1191 */, - TILEPRO_OPC_ILL, CHILD(1196), TILEPRO_OPC_ILL, TILEPRO_OPC_ILL, - BITFIELD(37, 2) /* index 1196 */, - TILEPRO_OPC_ILL, CHILD(1201), TILEPRO_OPC_ILL, TILEPRO_OPC_ILL, - BITFIELD(39, 2) /* index 1201 */, - TILEPRO_OPC_ILL, CHILD(1206), TILEPRO_OPC_ILL, TILEPRO_OPC_ILL, - BITFIELD(41, 2) /* index 1206 */, - TILEPRO_OPC_ILL, TILEPRO_OPC_ILL, TILEPRO_OPC_BPT, TILEPRO_OPC_ILL, - BITFIELD(53, 1) /* index 1211 */, - CHILD(1214), TILEPRO_OPC_NONE, - BITFIELD(33, 2) /* index 1214 */, - TILEPRO_OPC_ILL, TILEPRO_OPC_ILL, TILEPRO_OPC_ILL, CHILD(1219), - BITFIELD(35, 2) /* index 1219 */, - TILEPRO_OPC_ILL, CHILD(1224), TILEPRO_OPC_ILL, TILEPRO_OPC_ILL, - BITFIELD(37, 2) /* index 1224 */, - TILEPRO_OPC_ILL, CHILD(1229), TILEPRO_OPC_ILL, TILEPRO_OPC_ILL, - BITFIELD(39, 2) /* index 1229 */, - TILEPRO_OPC_ILL, CHILD(1234), TILEPRO_OPC_ILL, TILEPRO_OPC_ILL, - BITFIELD(41, 2) /* index 1234 */, - TILEPRO_OPC_ILL, TILEPRO_OPC_ILL, TILEPRO_OPC_RAISE, TILEPRO_OPC_ILL, - BITFIELD(53, 1) /* index 1239 */, - TILEPRO_OPC_ILL, TILEPRO_OPC_NONE, - BITFIELD(43, 3) /* index 1242 */, - CHILD(1251), CHILD(1254), CHILD(1257), CHILD(1275), CHILD(1278), - CHILD(1281), CHILD(1284), CHILD(1287), - BITFIELD(53, 1) /* index 1251 */, - TILEPRO_OPC_INV, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1254 */, - TILEPRO_OPC_IRET, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1257 */, - CHILD(1260), TILEPRO_OPC_NONE, - BITFIELD(31, 2) /* index 1260 */, - TILEPRO_OPC_LB, TILEPRO_OPC_LB, TILEPRO_OPC_LB, CHILD(1265), - BITFIELD(33, 2) /* index 1265 */, - TILEPRO_OPC_LB, TILEPRO_OPC_LB, TILEPRO_OPC_LB, CHILD(1270), - BITFIELD(35, 2) /* index 1270 */, - TILEPRO_OPC_LB, TILEPRO_OPC_LB, TILEPRO_OPC_LB, TILEPRO_OPC_PREFETCH, - BITFIELD(53, 1) /* index 1275 */, - TILEPRO_OPC_LB_U, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1278 */, - TILEPRO_OPC_LH, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1281 */, - TILEPRO_OPC_LH_U, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1284 */, - TILEPRO_OPC_LW, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1287 */, - TILEPRO_OPC_MF, TILEPRO_OPC_NONE, - BITFIELD(43, 3) /* index 1290 */, - CHILD(1299), CHILD(1302), CHILD(1305), CHILD(1308), CHILD(1311), - CHILD(1314), CHILD(1317), CHILD(1320), - BITFIELD(53, 1) /* index 1299 */, - TILEPRO_OPC_NAP, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1302 */, - TILEPRO_OPC_NOP, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1305 */, - TILEPRO_OPC_SWINT0, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1308 */, - TILEPRO_OPC_SWINT1, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1311 */, - TILEPRO_OPC_SWINT2, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1314 */, - TILEPRO_OPC_SWINT3, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1317 */, - TILEPRO_OPC_TNS, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1320 */, - TILEPRO_OPC_WH64, TILEPRO_OPC_NONE, - BITFIELD(43, 2) /* index 1323 */, - CHILD(1328), TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - BITFIELD(45, 1) /* index 1328 */, - CHILD(1331), TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1331 */, - TILEPRO_OPC_LW_NA, TILEPRO_OPC_NONE, - BITFIELD(46, 7) /* index 1334 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - CHILD(1463), CHILD(1463), CHILD(1463), CHILD(1463), CHILD(1466), - CHILD(1466), CHILD(1466), CHILD(1466), CHILD(1469), CHILD(1469), - CHILD(1469), CHILD(1469), CHILD(1472), CHILD(1472), CHILD(1472), - CHILD(1472), CHILD(1475), CHILD(1475), CHILD(1475), CHILD(1475), - CHILD(1478), CHILD(1478), CHILD(1478), CHILD(1478), CHILD(1481), - CHILD(1481), CHILD(1481), CHILD(1481), CHILD(1484), CHILD(1484), - CHILD(1484), CHILD(1484), CHILD(1487), CHILD(1487), CHILD(1487), - CHILD(1487), CHILD(1490), CHILD(1490), CHILD(1490), CHILD(1490), - CHILD(1151), CHILD(1493), CHILD(1517), CHILD(1529), TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1463 */, - TILEPRO_OPC_RLI_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1466 */, - TILEPRO_OPC_SHLIB_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1469 */, - TILEPRO_OPC_SHLIH_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1472 */, - TILEPRO_OPC_SHLI_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1475 */, - TILEPRO_OPC_SHRIB_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1478 */, - TILEPRO_OPC_SHRIH_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1481 */, - TILEPRO_OPC_SHRI_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1484 */, - TILEPRO_OPC_SRAIB_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1487 */, - TILEPRO_OPC_SRAIH_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1490 */, - TILEPRO_OPC_SRAI_SN, TILEPRO_OPC_NONE, - BITFIELD(43, 3) /* index 1493 */, - CHILD(1251), CHILD(1254), CHILD(1502), CHILD(1505), CHILD(1508), - CHILD(1511), CHILD(1514), CHILD(1287), - BITFIELD(53, 1) /* index 1502 */, - TILEPRO_OPC_LB_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1505 */, - TILEPRO_OPC_LB_U_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1508 */, - TILEPRO_OPC_LH_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1511 */, - TILEPRO_OPC_LH_U_SN, TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1514 */, - TILEPRO_OPC_LW_SN, TILEPRO_OPC_NONE, - BITFIELD(43, 3) /* index 1517 */, - CHILD(1299), CHILD(1302), CHILD(1305), CHILD(1308), CHILD(1311), - CHILD(1314), CHILD(1526), CHILD(1320), - BITFIELD(53, 1) /* index 1526 */, - TILEPRO_OPC_TNS_SN, TILEPRO_OPC_NONE, - BITFIELD(43, 2) /* index 1529 */, - CHILD(1534), TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - BITFIELD(45, 1) /* index 1534 */, - CHILD(1537), TILEPRO_OPC_NONE, - BITFIELD(53, 1) /* index 1537 */, - TILEPRO_OPC_LW_NA_SN, TILEPRO_OPC_NONE, -}; - -static const unsigned short decode_Y0_fsm[168] = -{ - BITFIELD(27, 4) /* index 0 */, - TILEPRO_OPC_NONE, CHILD(17), CHILD(22), CHILD(27), CHILD(47), CHILD(52), - CHILD(57), CHILD(62), CHILD(67), TILEPRO_OPC_ADDI, CHILD(72), CHILD(102), - TILEPRO_OPC_SEQI, CHILD(117), TILEPRO_OPC_SLTI, TILEPRO_OPC_SLTI_U, - BITFIELD(18, 2) /* index 17 */, - TILEPRO_OPC_ADD, TILEPRO_OPC_S1A, TILEPRO_OPC_S2A, TILEPRO_OPC_SUB, - BITFIELD(18, 2) /* index 22 */, - TILEPRO_OPC_MNZ, TILEPRO_OPC_MVNZ, TILEPRO_OPC_MVZ, TILEPRO_OPC_MZ, - BITFIELD(18, 2) /* index 27 */, - TILEPRO_OPC_AND, TILEPRO_OPC_NOR, CHILD(32), TILEPRO_OPC_XOR, - BITFIELD(12, 2) /* index 32 */, - TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, CHILD(37), - BITFIELD(14, 2) /* index 37 */, - TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, CHILD(42), - BITFIELD(16, 2) /* index 42 */, - TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_MOVE, - BITFIELD(18, 2) /* index 47 */, - TILEPRO_OPC_RL, TILEPRO_OPC_SHL, TILEPRO_OPC_SHR, TILEPRO_OPC_SRA, - BITFIELD(18, 2) /* index 52 */, - TILEPRO_OPC_SLTE, TILEPRO_OPC_SLTE_U, TILEPRO_OPC_SLT, TILEPRO_OPC_SLT_U, - BITFIELD(18, 2) /* index 57 */, - TILEPRO_OPC_MULHLSA_UU, TILEPRO_OPC_S3A, TILEPRO_OPC_SEQ, TILEPRO_OPC_SNE, - BITFIELD(18, 2) /* index 62 */, - TILEPRO_OPC_MULHH_SS, TILEPRO_OPC_MULHH_UU, TILEPRO_OPC_MULLL_SS, - TILEPRO_OPC_MULLL_UU, - BITFIELD(18, 2) /* index 67 */, - TILEPRO_OPC_MULHHA_SS, TILEPRO_OPC_MULHHA_UU, TILEPRO_OPC_MULLLA_SS, - TILEPRO_OPC_MULLLA_UU, - BITFIELD(0, 2) /* index 72 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(77), - BITFIELD(2, 2) /* index 77 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(82), - BITFIELD(4, 2) /* index 82 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(87), - BITFIELD(6, 2) /* index 87 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(92), - BITFIELD(8, 2) /* index 92 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(97), - BITFIELD(10, 2) /* index 97 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_INFO, - BITFIELD(6, 2) /* index 102 */, - TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, CHILD(107), - BITFIELD(8, 2) /* index 107 */, - TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, CHILD(112), - BITFIELD(10, 2) /* index 112 */, - TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_MOVEI, - BITFIELD(15, 5) /* index 117 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_RLI, TILEPRO_OPC_RLI, TILEPRO_OPC_RLI, TILEPRO_OPC_RLI, - TILEPRO_OPC_SHLI, TILEPRO_OPC_SHLI, TILEPRO_OPC_SHLI, TILEPRO_OPC_SHLI, - TILEPRO_OPC_SHRI, TILEPRO_OPC_SHRI, TILEPRO_OPC_SHRI, TILEPRO_OPC_SHRI, - TILEPRO_OPC_SRAI, TILEPRO_OPC_SRAI, TILEPRO_OPC_SRAI, TILEPRO_OPC_SRAI, - CHILD(150), CHILD(159), TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - BITFIELD(12, 3) /* index 150 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_BITX, TILEPRO_OPC_BYTEX, TILEPRO_OPC_CLZ, - TILEPRO_OPC_CTZ, TILEPRO_OPC_FNOP, TILEPRO_OPC_NOP, TILEPRO_OPC_PCNT, - BITFIELD(12, 3) /* index 159 */, - TILEPRO_OPC_TBLIDXB0, TILEPRO_OPC_TBLIDXB1, TILEPRO_OPC_TBLIDXB2, - TILEPRO_OPC_TBLIDXB3, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, -}; - -static const unsigned short decode_Y1_fsm[140] = -{ - BITFIELD(59, 4) /* index 0 */, - TILEPRO_OPC_NONE, CHILD(17), CHILD(22), CHILD(27), CHILD(47), CHILD(52), - CHILD(57), TILEPRO_OPC_ADDI, CHILD(62), CHILD(92), TILEPRO_OPC_SEQI, - CHILD(107), TILEPRO_OPC_SLTI, TILEPRO_OPC_SLTI_U, TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, - BITFIELD(49, 2) /* index 17 */, - TILEPRO_OPC_ADD, TILEPRO_OPC_S1A, TILEPRO_OPC_S2A, TILEPRO_OPC_SUB, - BITFIELD(49, 2) /* index 22 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_MNZ, TILEPRO_OPC_MZ, TILEPRO_OPC_NONE, - BITFIELD(49, 2) /* index 27 */, - TILEPRO_OPC_AND, TILEPRO_OPC_NOR, CHILD(32), TILEPRO_OPC_XOR, - BITFIELD(43, 2) /* index 32 */, - TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, CHILD(37), - BITFIELD(45, 2) /* index 37 */, - TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, CHILD(42), - BITFIELD(47, 2) /* index 42 */, - TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_MOVE, - BITFIELD(49, 2) /* index 47 */, - TILEPRO_OPC_RL, TILEPRO_OPC_SHL, TILEPRO_OPC_SHR, TILEPRO_OPC_SRA, - BITFIELD(49, 2) /* index 52 */, - TILEPRO_OPC_SLTE, TILEPRO_OPC_SLTE_U, TILEPRO_OPC_SLT, TILEPRO_OPC_SLT_U, - BITFIELD(49, 2) /* index 57 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_S3A, TILEPRO_OPC_SEQ, TILEPRO_OPC_SNE, - BITFIELD(31, 2) /* index 62 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(67), - BITFIELD(33, 2) /* index 67 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(72), - BITFIELD(35, 2) /* index 72 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(77), - BITFIELD(37, 2) /* index 77 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(82), - BITFIELD(39, 2) /* index 82 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(87), - BITFIELD(41, 2) /* index 87 */, - TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_INFO, - BITFIELD(37, 2) /* index 92 */, - TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, CHILD(97), - BITFIELD(39, 2) /* index 97 */, - TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, CHILD(102), - BITFIELD(41, 2) /* index 102 */, - TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_MOVEI, - BITFIELD(48, 3) /* index 107 */, - TILEPRO_OPC_NONE, TILEPRO_OPC_RLI, TILEPRO_OPC_SHLI, TILEPRO_OPC_SHRI, - TILEPRO_OPC_SRAI, CHILD(116), TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - BITFIELD(43, 3) /* index 116 */, - TILEPRO_OPC_NONE, CHILD(125), CHILD(130), CHILD(135), TILEPRO_OPC_NONE, - TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - BITFIELD(46, 2) /* index 125 */, - TILEPRO_OPC_FNOP, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - BITFIELD(46, 2) /* index 130 */, - TILEPRO_OPC_ILL, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, - BITFIELD(46, 2) /* index 135 */, - TILEPRO_OPC_NOP, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, -}; - -static const unsigned short decode_Y2_fsm[24] = -{ - BITFIELD(56, 3) /* index 0 */, - CHILD(9), TILEPRO_OPC_LB_U, TILEPRO_OPC_LH, TILEPRO_OPC_LH_U, - TILEPRO_OPC_LW, TILEPRO_OPC_SB, TILEPRO_OPC_SH, TILEPRO_OPC_SW, - BITFIELD(20, 2) /* index 9 */, - TILEPRO_OPC_LB, TILEPRO_OPC_LB, TILEPRO_OPC_LB, CHILD(14), - BITFIELD(22, 2) /* index 14 */, - TILEPRO_OPC_LB, TILEPRO_OPC_LB, TILEPRO_OPC_LB, CHILD(19), - BITFIELD(24, 2) /* index 19 */, - TILEPRO_OPC_LB, TILEPRO_OPC_LB, TILEPRO_OPC_LB, TILEPRO_OPC_PREFETCH, -}; - -#undef BITFIELD -#undef CHILD -const unsigned short * const -tilepro_bundle_decoder_fsms[TILEPRO_NUM_PIPELINE_ENCODINGS] = -{ - decode_X0_fsm, - decode_X1_fsm, - decode_Y0_fsm, - decode_Y1_fsm, - decode_Y2_fsm -}; -const struct tilepro_operand tilepro_operands[43] = -{ - { - TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_IMM8_X0), - 8, 1, 0, 0, 0, 0, - create_Imm8_X0, get_Imm8_X0 - }, - { - TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_IMM8_X1), - 8, 1, 0, 0, 0, 0, - create_Imm8_X1, get_Imm8_X1 - }, - { - TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_IMM8_Y0), - 8, 1, 0, 0, 0, 0, - create_Imm8_Y0, get_Imm8_Y0 - }, - { - TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_IMM8_Y1), - 8, 1, 0, 0, 0, 0, - create_Imm8_Y1, get_Imm8_Y1 - }, - { - TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_IMM16_X0), - 16, 1, 0, 0, 0, 0, - create_Imm16_X0, get_Imm16_X0 - }, - { - TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_IMM16_X1), - 16, 1, 0, 0, 0, 0, - create_Imm16_X1, get_Imm16_X1 - }, - { - TILEPRO_OP_TYPE_ADDRESS, BFD_RELOC(TILEPRO_JOFFLONG_X1), - 29, 1, 0, 0, 1, TILEPRO_LOG2_BUNDLE_ALIGNMENT_IN_BYTES, - create_JOffLong_X1, get_JOffLong_X1 - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 0, 1, 0, 0, - create_Dest_X0, get_Dest_X0 - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcA_X0, get_SrcA_X0 - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 0, 1, 0, 0, - create_Dest_X1, get_Dest_X1 - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcA_X1, get_SrcA_X1 - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 0, 1, 0, 0, - create_Dest_Y0, get_Dest_Y0 - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcA_Y0, get_SrcA_Y0 - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 0, 1, 0, 0, - create_Dest_Y1, get_Dest_Y1 - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcA_Y1, get_SrcA_Y1 - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcA_Y2, get_SrcA_Y2 - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcB_X0, get_SrcB_X0 - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcB_X1, get_SrcB_X1 - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcB_Y0, get_SrcB_Y0 - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcB_Y1, get_SrcB_Y1 - }, - { - TILEPRO_OP_TYPE_ADDRESS, BFD_RELOC(TILEPRO_BROFF_X1), - 17, 1, 0, 0, 1, TILEPRO_LOG2_BUNDLE_ALIGNMENT_IN_BYTES, - create_BrOff_X1, get_BrOff_X1 - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 1, 0, 0, - create_Dest_X0, get_Dest_X0 - }, - { - TILEPRO_OP_TYPE_ADDRESS, BFD_RELOC(NONE), - 28, 1, 0, 0, 1, TILEPRO_LOG2_BUNDLE_ALIGNMENT_IN_BYTES, - create_JOff_X1, get_JOff_X1 - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 0, 1, 0, 0, - create_SrcBDest_Y2, get_SrcBDest_Y2 - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 1, 0, 0, - create_SrcA_X1, get_SrcA_X1 - }, - { - TILEPRO_OP_TYPE_SPR, BFD_RELOC(TILEPRO_MF_IMM15_X1), - 15, 0, 0, 0, 0, 0, - create_MF_Imm15_X1, get_MF_Imm15_X1 - }, - { - TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_MMSTART_X0), - 5, 0, 0, 0, 0, 0, - create_MMStart_X0, get_MMStart_X0 - }, - { - TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_MMEND_X0), - 5, 0, 0, 0, 0, 0, - create_MMEnd_X0, get_MMEnd_X0 - }, - { - TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_MMSTART_X1), - 5, 0, 0, 0, 0, 0, - create_MMStart_X1, get_MMStart_X1 - }, - { - TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_MMEND_X1), - 5, 0, 0, 0, 0, 0, - create_MMEnd_X1, get_MMEnd_X1 - }, - { - TILEPRO_OP_TYPE_SPR, BFD_RELOC(TILEPRO_MT_IMM15_X1), - 15, 0, 0, 0, 0, 0, - create_MT_Imm15_X1, get_MT_Imm15_X1 - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 1, 0, 0, - create_Dest_Y0, get_Dest_Y0 - }, - { - TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_SHAMT_X0), - 5, 0, 0, 0, 0, 0, - create_ShAmt_X0, get_ShAmt_X0 - }, - { - TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_SHAMT_X1), - 5, 0, 0, 0, 0, 0, - create_ShAmt_X1, get_ShAmt_X1 - }, - { - TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_SHAMT_Y0), - 5, 0, 0, 0, 0, 0, - create_ShAmt_Y0, get_ShAmt_Y0 - }, - { - TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_SHAMT_Y1), - 5, 0, 0, 0, 0, 0, - create_ShAmt_Y1, get_ShAmt_Y1 - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcBDest_Y2, get_SrcBDest_Y2 - }, - { - TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_DEST_IMM8_X1), - 8, 1, 0, 0, 0, 0, - create_Dest_Imm8_X1, get_Dest_Imm8_X1 - }, - { - TILEPRO_OP_TYPE_ADDRESS, BFD_RELOC(NONE), - 10, 1, 0, 0, 1, TILEPRO_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES, - create_BrOff_SN, get_BrOff_SN - }, - { - TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(NONE), - 8, 0, 0, 0, 0, 0, - create_Imm8_SN, get_Imm8_SN - }, - { - TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(NONE), - 8, 1, 0, 0, 0, 0, - create_Imm8_SN, get_Imm8_SN - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 2, 0, 0, 1, 0, 0, - create_Dest_SN, get_Dest_SN - }, - { - TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 2, 0, 1, 0, 0, 0, - create_Src_SN, get_Src_SN - } -}; - - - - -/* Given a set of bundle bits and a specific pipe, returns which - * instruction the bundle contains in that pipe. - */ -const struct tilepro_opcode * -find_opcode(tilepro_bundle_bits bits, tilepro_pipeline pipe) -{ - const unsigned short *table = tilepro_bundle_decoder_fsms[pipe]; - int index = 0; - - while (1) - { - unsigned short bitspec = table[index]; - unsigned int bitfield = - ((unsigned int)(bits >> (bitspec & 63))) & (bitspec >> 6); - - unsigned short next = table[index + 1 + bitfield]; - if (next <= TILEPRO_OPC_NONE) - return &tilepro_opcodes[next]; - - index = next - TILEPRO_OPC_NONE; - } -} - - -int -parse_insn_tilepro(tilepro_bundle_bits bits, - unsigned int pc, - struct tilepro_decoded_instruction - decoded[TILEPRO_MAX_INSTRUCTIONS_PER_BUNDLE]) -{ - int num_instructions = 0; - int pipe; - - int min_pipe, max_pipe; - if ((bits & TILEPRO_BUNDLE_Y_ENCODING_MASK) == 0) - { - min_pipe = TILEPRO_PIPELINE_X0; - max_pipe = TILEPRO_PIPELINE_X1; - } - else - { - min_pipe = TILEPRO_PIPELINE_Y0; - max_pipe = TILEPRO_PIPELINE_Y2; - } - - /* For each pipe, find an instruction that fits. */ - for (pipe = min_pipe; pipe <= max_pipe; pipe++) - { - const struct tilepro_opcode *opc; - struct tilepro_decoded_instruction *d; - int i; - - d = &decoded[num_instructions++]; - opc = find_opcode (bits, (tilepro_pipeline)pipe); - d->opcode = opc; - - /* Decode each operand, sign extending, etc. as appropriate. */ - for (i = 0; i < opc->num_operands; i++) - { - const struct tilepro_operand *op = - &tilepro_operands[opc->operands[pipe][i]]; - int opval = op->extract (bits); - if (op->is_signed) - { - /* Sign-extend the operand. */ - int shift = (int)((sizeof(int) * 8) - op->num_bits); - opval = (opval << shift) >> shift; - } - - /* Adjust PC-relative scaled branch offsets. */ - if (op->type == TILEPRO_OP_TYPE_ADDRESS) - { - opval *= TILEPRO_BUNDLE_SIZE_IN_BYTES; - opval += (int)pc; - } - - /* Record the final value. */ - d->operands[i] = op; - d->operand_values[i] = opval; - } - } - - return num_instructions; -} diff --git a/arch/tile/kernel/tile-desc_64.c b/arch/tile/kernel/tile-desc_64.c deleted file mode 100644 index 65b5f8aca706..000000000000 --- a/arch/tile/kernel/tile-desc_64.c +++ /dev/null @@ -1,2218 +0,0 @@ -/* TILE-Gx opcode information. - * - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * - * - * - * - */ - -/* This define is BFD_RELOC_##x for real bfd, or -1 for everyone else. */ -#define BFD_RELOC(x) -1 - -/* Special registers. */ -#define TREG_LR 55 -#define TREG_SN 56 -#define TREG_ZERO 63 - -#include <linux/stddef.h> -#include <asm/tile-desc.h> - -const struct tilegx_opcode tilegx_opcodes[334] = -{ - { "bpt", TILEGX_OPC_BPT, 0x2, 0, TREG_ZERO, 0, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "info", TILEGX_OPC_INFO, 0xf, 1, TREG_ZERO, 1, - { { 0 }, { 1 }, { 2 }, { 3 }, { 0, } }, - }, - { "infol", TILEGX_OPC_INFOL, 0x3, 1, TREG_ZERO, 1, - { { 4 }, { 5 }, { 0, }, { 0, }, { 0, } }, - }, - { "move", TILEGX_OPC_MOVE, 0xf, 2, TREG_ZERO, 1, - { { 6, 7 }, { 8, 9 }, { 10, 11 }, { 12, 13 }, { 0, } }, - }, - { "movei", TILEGX_OPC_MOVEI, 0xf, 2, TREG_ZERO, 1, - { { 6, 0 }, { 8, 1 }, { 10, 2 }, { 12, 3 }, { 0, } }, - }, - { "moveli", TILEGX_OPC_MOVELI, 0x3, 2, TREG_ZERO, 1, - { { 6, 4 }, { 8, 5 }, { 0, }, { 0, }, { 0, } }, - }, - { "prefetch", TILEGX_OPC_PREFETCH, 0x12, 1, TREG_ZERO, 1, - { { 0, }, { 9 }, { 0, }, { 0, }, { 14 } }, - }, - { "prefetch_add_l1", TILEGX_OPC_PREFETCH_ADD_L1, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "prefetch_add_l1_fault", TILEGX_OPC_PREFETCH_ADD_L1_FAULT, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "prefetch_add_l2", TILEGX_OPC_PREFETCH_ADD_L2, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "prefetch_add_l2_fault", TILEGX_OPC_PREFETCH_ADD_L2_FAULT, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "prefetch_add_l3", TILEGX_OPC_PREFETCH_ADD_L3, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "prefetch_add_l3_fault", TILEGX_OPC_PREFETCH_ADD_L3_FAULT, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "prefetch_l1", TILEGX_OPC_PREFETCH_L1, 0x12, 1, TREG_ZERO, 1, - { { 0, }, { 9 }, { 0, }, { 0, }, { 14 } }, - }, - { "prefetch_l1_fault", TILEGX_OPC_PREFETCH_L1_FAULT, 0x12, 1, TREG_ZERO, 1, - { { 0, }, { 9 }, { 0, }, { 0, }, { 14 } }, - }, - { "prefetch_l2", TILEGX_OPC_PREFETCH_L2, 0x12, 1, TREG_ZERO, 1, - { { 0, }, { 9 }, { 0, }, { 0, }, { 14 } }, - }, - { "prefetch_l2_fault", TILEGX_OPC_PREFETCH_L2_FAULT, 0x12, 1, TREG_ZERO, 1, - { { 0, }, { 9 }, { 0, }, { 0, }, { 14 } }, - }, - { "prefetch_l3", TILEGX_OPC_PREFETCH_L3, 0x12, 1, TREG_ZERO, 1, - { { 0, }, { 9 }, { 0, }, { 0, }, { 14 } }, - }, - { "prefetch_l3_fault", TILEGX_OPC_PREFETCH_L3_FAULT, 0x12, 1, TREG_ZERO, 1, - { { 0, }, { 9 }, { 0, }, { 0, }, { 14 } }, - }, - { "raise", TILEGX_OPC_RAISE, 0x2, 0, TREG_ZERO, 1, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "add", TILEGX_OPC_ADD, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "addi", TILEGX_OPC_ADDI, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 10, 11, 2 }, { 12, 13, 3 }, { 0, } }, - }, - { "addli", TILEGX_OPC_ADDLI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 4 }, { 8, 9, 5 }, { 0, }, { 0, }, { 0, } }, - }, - { "addx", TILEGX_OPC_ADDX, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "addxi", TILEGX_OPC_ADDXI, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 10, 11, 2 }, { 12, 13, 3 }, { 0, } }, - }, - { "addxli", TILEGX_OPC_ADDXLI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 4 }, { 8, 9, 5 }, { 0, }, { 0, }, { 0, } }, - }, - { "addxsc", TILEGX_OPC_ADDXSC, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "and", TILEGX_OPC_AND, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "andi", TILEGX_OPC_ANDI, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 10, 11, 2 }, { 12, 13, 3 }, { 0, } }, - }, - { "beqz", TILEGX_OPC_BEQZ, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "beqzt", TILEGX_OPC_BEQZT, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bfexts", TILEGX_OPC_BFEXTS, 0x1, 4, TREG_ZERO, 1, - { { 6, 7, 21, 22 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "bfextu", TILEGX_OPC_BFEXTU, 0x1, 4, TREG_ZERO, 1, - { { 6, 7, 21, 22 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "bfins", TILEGX_OPC_BFINS, 0x1, 4, TREG_ZERO, 1, - { { 23, 7, 21, 22 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "bgez", TILEGX_OPC_BGEZ, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bgezt", TILEGX_OPC_BGEZT, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bgtz", TILEGX_OPC_BGTZ, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bgtzt", TILEGX_OPC_BGTZT, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "blbc", TILEGX_OPC_BLBC, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "blbct", TILEGX_OPC_BLBCT, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "blbs", TILEGX_OPC_BLBS, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "blbst", TILEGX_OPC_BLBST, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "blez", TILEGX_OPC_BLEZ, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "blezt", TILEGX_OPC_BLEZT, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bltz", TILEGX_OPC_BLTZ, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bltzt", TILEGX_OPC_BLTZT, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bnez", TILEGX_OPC_BNEZ, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "bnezt", TILEGX_OPC_BNEZT, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, - }, - { "clz", TILEGX_OPC_CLZ, 0x5, 2, TREG_ZERO, 1, - { { 6, 7 }, { 0, }, { 10, 11 }, { 0, }, { 0, } }, - }, - { "cmoveqz", TILEGX_OPC_CMOVEQZ, 0x5, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } }, - }, - { "cmovnez", TILEGX_OPC_CMOVNEZ, 0x5, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } }, - }, - { "cmpeq", TILEGX_OPC_CMPEQ, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "cmpeqi", TILEGX_OPC_CMPEQI, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 10, 11, 2 }, { 12, 13, 3 }, { 0, } }, - }, - { "cmpexch", TILEGX_OPC_CMPEXCH, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "cmpexch4", TILEGX_OPC_CMPEXCH4, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "cmples", TILEGX_OPC_CMPLES, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "cmpleu", TILEGX_OPC_CMPLEU, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "cmplts", TILEGX_OPC_CMPLTS, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "cmpltsi", TILEGX_OPC_CMPLTSI, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 10, 11, 2 }, { 12, 13, 3 }, { 0, } }, - }, - { "cmpltu", TILEGX_OPC_CMPLTU, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "cmpltui", TILEGX_OPC_CMPLTUI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "cmpne", TILEGX_OPC_CMPNE, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "cmul", TILEGX_OPC_CMUL, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "cmula", TILEGX_OPC_CMULA, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "cmulaf", TILEGX_OPC_CMULAF, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "cmulf", TILEGX_OPC_CMULF, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "cmulfr", TILEGX_OPC_CMULFR, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "cmulh", TILEGX_OPC_CMULH, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "cmulhr", TILEGX_OPC_CMULHR, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "crc32_32", TILEGX_OPC_CRC32_32, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "crc32_8", TILEGX_OPC_CRC32_8, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "ctz", TILEGX_OPC_CTZ, 0x5, 2, TREG_ZERO, 1, - { { 6, 7 }, { 0, }, { 10, 11 }, { 0, }, { 0, } }, - }, - { "dblalign", TILEGX_OPC_DBLALIGN, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "dblalign2", TILEGX_OPC_DBLALIGN2, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "dblalign4", TILEGX_OPC_DBLALIGN4, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "dblalign6", TILEGX_OPC_DBLALIGN6, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "drain", TILEGX_OPC_DRAIN, 0x2, 0, TREG_ZERO, 0, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "dtlbpr", TILEGX_OPC_DTLBPR, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 9 }, { 0, }, { 0, }, { 0, } }, - }, - { "exch", TILEGX_OPC_EXCH, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "exch4", TILEGX_OPC_EXCH4, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "fdouble_add_flags", TILEGX_OPC_FDOUBLE_ADD_FLAGS, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "fdouble_addsub", TILEGX_OPC_FDOUBLE_ADDSUB, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "fdouble_mul_flags", TILEGX_OPC_FDOUBLE_MUL_FLAGS, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "fdouble_pack1", TILEGX_OPC_FDOUBLE_PACK1, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "fdouble_pack2", TILEGX_OPC_FDOUBLE_PACK2, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "fdouble_sub_flags", TILEGX_OPC_FDOUBLE_SUB_FLAGS, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "fdouble_unpack_max", TILEGX_OPC_FDOUBLE_UNPACK_MAX, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "fdouble_unpack_min", TILEGX_OPC_FDOUBLE_UNPACK_MIN, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "fetchadd", TILEGX_OPC_FETCHADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "fetchadd4", TILEGX_OPC_FETCHADD4, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "fetchaddgez", TILEGX_OPC_FETCHADDGEZ, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "fetchaddgez4", TILEGX_OPC_FETCHADDGEZ4, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "fetchand", TILEGX_OPC_FETCHAND, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "fetchand4", TILEGX_OPC_FETCHAND4, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "fetchor", TILEGX_OPC_FETCHOR, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "fetchor4", TILEGX_OPC_FETCHOR4, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "finv", TILEGX_OPC_FINV, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 9 }, { 0, }, { 0, }, { 0, } }, - }, - { "flush", TILEGX_OPC_FLUSH, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 9 }, { 0, }, { 0, }, { 0, } }, - }, - { "flushwb", TILEGX_OPC_FLUSHWB, 0x2, 0, TREG_ZERO, 1, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "fnop", TILEGX_OPC_FNOP, 0xf, 0, TREG_ZERO, 1, - { { }, { }, { }, { }, { 0, } }, - }, - { "fsingle_add1", TILEGX_OPC_FSINGLE_ADD1, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "fsingle_addsub2", TILEGX_OPC_FSINGLE_ADDSUB2, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "fsingle_mul1", TILEGX_OPC_FSINGLE_MUL1, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "fsingle_mul2", TILEGX_OPC_FSINGLE_MUL2, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "fsingle_pack1", TILEGX_OPC_FSINGLE_PACK1, 0x5, 2, TREG_ZERO, 1, - { { 6, 7 }, { 0, }, { 10, 11 }, { 0, }, { 0, } }, - }, - { "fsingle_pack2", TILEGX_OPC_FSINGLE_PACK2, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "fsingle_sub1", TILEGX_OPC_FSINGLE_SUB1, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "icoh", TILEGX_OPC_ICOH, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 9 }, { 0, }, { 0, }, { 0, } }, - }, - { "ill", TILEGX_OPC_ILL, 0xa, 0, TREG_ZERO, 1, - { { 0, }, { }, { 0, }, { }, { 0, } }, - }, - { "inv", TILEGX_OPC_INV, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 9 }, { 0, }, { 0, }, { 0, } }, - }, - { "iret", TILEGX_OPC_IRET, 0x2, 0, TREG_ZERO, 1, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "j", TILEGX_OPC_J, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 25 }, { 0, }, { 0, }, { 0, } }, - }, - { "jal", TILEGX_OPC_JAL, 0x2, 1, TREG_LR, 1, - { { 0, }, { 25 }, { 0, }, { 0, }, { 0, } }, - }, - { "jalr", TILEGX_OPC_JALR, 0xa, 1, TREG_LR, 1, - { { 0, }, { 9 }, { 0, }, { 13 }, { 0, } }, - }, - { "jalrp", TILEGX_OPC_JALRP, 0xa, 1, TREG_LR, 1, - { { 0, }, { 9 }, { 0, }, { 13 }, { 0, } }, - }, - { "jr", TILEGX_OPC_JR, 0xa, 1, TREG_ZERO, 1, - { { 0, }, { 9 }, { 0, }, { 13 }, { 0, } }, - }, - { "jrp", TILEGX_OPC_JRP, 0xa, 1, TREG_ZERO, 1, - { { 0, }, { 9 }, { 0, }, { 13 }, { 0, } }, - }, - { "ld", TILEGX_OPC_LD, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 26, 14 } }, - }, - { "ld1s", TILEGX_OPC_LD1S, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 26, 14 } }, - }, - { "ld1s_add", TILEGX_OPC_LD1S_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "ld1u", TILEGX_OPC_LD1U, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 26, 14 } }, - }, - { "ld1u_add", TILEGX_OPC_LD1U_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "ld2s", TILEGX_OPC_LD2S, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 26, 14 } }, - }, - { "ld2s_add", TILEGX_OPC_LD2S_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "ld2u", TILEGX_OPC_LD2U, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 26, 14 } }, - }, - { "ld2u_add", TILEGX_OPC_LD2U_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "ld4s", TILEGX_OPC_LD4S, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 26, 14 } }, - }, - { "ld4s_add", TILEGX_OPC_LD4S_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "ld4u", TILEGX_OPC_LD4U, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 26, 14 } }, - }, - { "ld4u_add", TILEGX_OPC_LD4U_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "ld_add", TILEGX_OPC_LD_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "ldna", TILEGX_OPC_LDNA, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 0, } }, - }, - { "ldna_add", TILEGX_OPC_LDNA_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "ldnt", TILEGX_OPC_LDNT, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 0, } }, - }, - { "ldnt1s", TILEGX_OPC_LDNT1S, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 0, } }, - }, - { "ldnt1s_add", TILEGX_OPC_LDNT1S_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "ldnt1u", TILEGX_OPC_LDNT1U, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 0, } }, - }, - { "ldnt1u_add", TILEGX_OPC_LDNT1U_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "ldnt2s", TILEGX_OPC_LDNT2S, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 0, } }, - }, - { "ldnt2s_add", TILEGX_OPC_LDNT2S_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "ldnt2u", TILEGX_OPC_LDNT2U, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 0, } }, - }, - { "ldnt2u_add", TILEGX_OPC_LDNT2U_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "ldnt4s", TILEGX_OPC_LDNT4S, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 0, } }, - }, - { "ldnt4s_add", TILEGX_OPC_LDNT4S_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "ldnt4u", TILEGX_OPC_LDNT4U, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 0, } }, - }, - { "ldnt4u_add", TILEGX_OPC_LDNT4U_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "ldnt_add", TILEGX_OPC_LDNT_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "lnk", TILEGX_OPC_LNK, 0xa, 1, TREG_ZERO, 1, - { { 0, }, { 8 }, { 0, }, { 12 }, { 0, } }, - }, - { "mf", TILEGX_OPC_MF, 0x2, 0, TREG_ZERO, 1, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "mfspr", TILEGX_OPC_MFSPR, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 8, 27 }, { 0, }, { 0, }, { 0, } }, - }, - { "mm", TILEGX_OPC_MM, 0x1, 4, TREG_ZERO, 1, - { { 23, 7, 21, 22 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mnz", TILEGX_OPC_MNZ, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "mtspr", TILEGX_OPC_MTSPR, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 28, 9 }, { 0, }, { 0, }, { 0, } }, - }, - { "mul_hs_hs", TILEGX_OPC_MUL_HS_HS, 0x5, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 10, 11, 18 }, { 0, }, { 0, } }, - }, - { "mul_hs_hu", TILEGX_OPC_MUL_HS_HU, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mul_hs_ls", TILEGX_OPC_MUL_HS_LS, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mul_hs_lu", TILEGX_OPC_MUL_HS_LU, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mul_hu_hu", TILEGX_OPC_MUL_HU_HU, 0x5, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 10, 11, 18 }, { 0, }, { 0, } }, - }, - { "mul_hu_ls", TILEGX_OPC_MUL_HU_LS, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mul_hu_lu", TILEGX_OPC_MUL_HU_LU, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mul_ls_ls", TILEGX_OPC_MUL_LS_LS, 0x5, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 10, 11, 18 }, { 0, }, { 0, } }, - }, - { "mul_ls_lu", TILEGX_OPC_MUL_LS_LU, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mul_lu_lu", TILEGX_OPC_MUL_LU_LU, 0x5, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 10, 11, 18 }, { 0, }, { 0, } }, - }, - { "mula_hs_hs", TILEGX_OPC_MULA_HS_HS, 0x5, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } }, - }, - { "mula_hs_hu", TILEGX_OPC_MULA_HS_HU, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mula_hs_ls", TILEGX_OPC_MULA_HS_LS, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mula_hs_lu", TILEGX_OPC_MULA_HS_LU, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mula_hu_hu", TILEGX_OPC_MULA_HU_HU, 0x5, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } }, - }, - { "mula_hu_ls", TILEGX_OPC_MULA_HU_LS, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mula_hu_lu", TILEGX_OPC_MULA_HU_LU, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mula_ls_ls", TILEGX_OPC_MULA_LS_LS, 0x5, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } }, - }, - { "mula_ls_lu", TILEGX_OPC_MULA_LS_LU, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "mula_lu_lu", TILEGX_OPC_MULA_LU_LU, 0x5, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } }, - }, - { "mulax", TILEGX_OPC_MULAX, 0x5, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } }, - }, - { "mulx", TILEGX_OPC_MULX, 0x5, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 10, 11, 18 }, { 0, }, { 0, } }, - }, - { "mz", TILEGX_OPC_MZ, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "nap", TILEGX_OPC_NAP, 0x2, 0, TREG_ZERO, 0, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "nop", TILEGX_OPC_NOP, 0xf, 0, TREG_ZERO, 1, - { { }, { }, { }, { }, { 0, } }, - }, - { "nor", TILEGX_OPC_NOR, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "or", TILEGX_OPC_OR, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "ori", TILEGX_OPC_ORI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "pcnt", TILEGX_OPC_PCNT, 0x5, 2, TREG_ZERO, 1, - { { 6, 7 }, { 0, }, { 10, 11 }, { 0, }, { 0, } }, - }, - { "revbits", TILEGX_OPC_REVBITS, 0x5, 2, TREG_ZERO, 1, - { { 6, 7 }, { 0, }, { 10, 11 }, { 0, }, { 0, } }, - }, - { "revbytes", TILEGX_OPC_REVBYTES, 0x5, 2, TREG_ZERO, 1, - { { 6, 7 }, { 0, }, { 10, 11 }, { 0, }, { 0, } }, - }, - { "rotl", TILEGX_OPC_ROTL, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "rotli", TILEGX_OPC_ROTLI, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 29 }, { 8, 9, 30 }, { 10, 11, 31 }, { 12, 13, 32 }, { 0, } }, - }, - { "shl", TILEGX_OPC_SHL, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "shl16insli", TILEGX_OPC_SHL16INSLI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 4 }, { 8, 9, 5 }, { 0, }, { 0, }, { 0, } }, - }, - { "shl1add", TILEGX_OPC_SHL1ADD, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "shl1addx", TILEGX_OPC_SHL1ADDX, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "shl2add", TILEGX_OPC_SHL2ADD, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "shl2addx", TILEGX_OPC_SHL2ADDX, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "shl3add", TILEGX_OPC_SHL3ADD, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "shl3addx", TILEGX_OPC_SHL3ADDX, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "shli", TILEGX_OPC_SHLI, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 29 }, { 8, 9, 30 }, { 10, 11, 31 }, { 12, 13, 32 }, { 0, } }, - }, - { "shlx", TILEGX_OPC_SHLX, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "shlxi", TILEGX_OPC_SHLXI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 29 }, { 8, 9, 30 }, { 0, }, { 0, }, { 0, } }, - }, - { "shrs", TILEGX_OPC_SHRS, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "shrsi", TILEGX_OPC_SHRSI, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 29 }, { 8, 9, 30 }, { 10, 11, 31 }, { 12, 13, 32 }, { 0, } }, - }, - { "shru", TILEGX_OPC_SHRU, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "shrui", TILEGX_OPC_SHRUI, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 29 }, { 8, 9, 30 }, { 10, 11, 31 }, { 12, 13, 32 }, { 0, } }, - }, - { "shrux", TILEGX_OPC_SHRUX, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "shruxi", TILEGX_OPC_SHRUXI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 29 }, { 8, 9, 30 }, { 0, }, { 0, }, { 0, } }, - }, - { "shufflebytes", TILEGX_OPC_SHUFFLEBYTES, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "st", TILEGX_OPC_ST, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 9, 17 }, { 0, }, { 0, }, { 14, 33 } }, - }, - { "st1", TILEGX_OPC_ST1, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 9, 17 }, { 0, }, { 0, }, { 14, 33 } }, - }, - { "st1_add", TILEGX_OPC_ST1_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } }, - }, - { "st2", TILEGX_OPC_ST2, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 9, 17 }, { 0, }, { 0, }, { 14, 33 } }, - }, - { "st2_add", TILEGX_OPC_ST2_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } }, - }, - { "st4", TILEGX_OPC_ST4, 0x12, 2, TREG_ZERO, 1, - { { 0, }, { 9, 17 }, { 0, }, { 0, }, { 14, 33 } }, - }, - { "st4_add", TILEGX_OPC_ST4_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } }, - }, - { "st_add", TILEGX_OPC_ST_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } }, - }, - { "stnt", TILEGX_OPC_STNT, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "stnt1", TILEGX_OPC_STNT1, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "stnt1_add", TILEGX_OPC_STNT1_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } }, - }, - { "stnt2", TILEGX_OPC_STNT2, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "stnt2_add", TILEGX_OPC_STNT2_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } }, - }, - { "stnt4", TILEGX_OPC_STNT4, 0x2, 2, TREG_ZERO, 1, - { { 0, }, { 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "stnt4_add", TILEGX_OPC_STNT4_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } }, - }, - { "stnt_add", TILEGX_OPC_STNT_ADD, 0x2, 3, TREG_ZERO, 1, - { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } }, - }, - { "sub", TILEGX_OPC_SUB, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "subx", TILEGX_OPC_SUBX, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "subxsc", TILEGX_OPC_SUBXSC, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "swint0", TILEGX_OPC_SWINT0, 0x2, 0, TREG_ZERO, 0, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "swint1", TILEGX_OPC_SWINT1, 0x2, 0, TREG_ZERO, 0, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "swint2", TILEGX_OPC_SWINT2, 0x2, 0, TREG_ZERO, 0, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "swint3", TILEGX_OPC_SWINT3, 0x2, 0, TREG_ZERO, 0, - { { 0, }, { }, { 0, }, { 0, }, { 0, } }, - }, - { "tblidxb0", TILEGX_OPC_TBLIDXB0, 0x5, 2, TREG_ZERO, 1, - { { 23, 7 }, { 0, }, { 24, 11 }, { 0, }, { 0, } }, - }, - { "tblidxb1", TILEGX_OPC_TBLIDXB1, 0x5, 2, TREG_ZERO, 1, - { { 23, 7 }, { 0, }, { 24, 11 }, { 0, }, { 0, } }, - }, - { "tblidxb2", TILEGX_OPC_TBLIDXB2, 0x5, 2, TREG_ZERO, 1, - { { 23, 7 }, { 0, }, { 24, 11 }, { 0, }, { 0, } }, - }, - { "tblidxb3", TILEGX_OPC_TBLIDXB3, 0x5, 2, TREG_ZERO, 1, - { { 23, 7 }, { 0, }, { 24, 11 }, { 0, }, { 0, } }, - }, - { "v1add", TILEGX_OPC_V1ADD, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1addi", TILEGX_OPC_V1ADDI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1adduc", TILEGX_OPC_V1ADDUC, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1adiffu", TILEGX_OPC_V1ADIFFU, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v1avgu", TILEGX_OPC_V1AVGU, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v1cmpeq", TILEGX_OPC_V1CMPEQ, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1cmpeqi", TILEGX_OPC_V1CMPEQI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1cmples", TILEGX_OPC_V1CMPLES, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1cmpleu", TILEGX_OPC_V1CMPLEU, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1cmplts", TILEGX_OPC_V1CMPLTS, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1cmpltsi", TILEGX_OPC_V1CMPLTSI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1cmpltu", TILEGX_OPC_V1CMPLTU, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1cmpltui", TILEGX_OPC_V1CMPLTUI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1cmpne", TILEGX_OPC_V1CMPNE, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1ddotpu", TILEGX_OPC_V1DDOTPU, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v1ddotpua", TILEGX_OPC_V1DDOTPUA, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v1ddotpus", TILEGX_OPC_V1DDOTPUS, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v1ddotpusa", TILEGX_OPC_V1DDOTPUSA, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v1dotp", TILEGX_OPC_V1DOTP, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v1dotpa", TILEGX_OPC_V1DOTPA, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v1dotpu", TILEGX_OPC_V1DOTPU, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v1dotpua", TILEGX_OPC_V1DOTPUA, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v1dotpus", TILEGX_OPC_V1DOTPUS, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v1dotpusa", TILEGX_OPC_V1DOTPUSA, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v1int_h", TILEGX_OPC_V1INT_H, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1int_l", TILEGX_OPC_V1INT_L, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1maxu", TILEGX_OPC_V1MAXU, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1maxui", TILEGX_OPC_V1MAXUI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1minu", TILEGX_OPC_V1MINU, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1minui", TILEGX_OPC_V1MINUI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1mnz", TILEGX_OPC_V1MNZ, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1multu", TILEGX_OPC_V1MULTU, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v1mulu", TILEGX_OPC_V1MULU, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v1mulus", TILEGX_OPC_V1MULUS, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v1mz", TILEGX_OPC_V1MZ, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1sadau", TILEGX_OPC_V1SADAU, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v1sadu", TILEGX_OPC_V1SADU, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v1shl", TILEGX_OPC_V1SHL, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1shli", TILEGX_OPC_V1SHLI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 29 }, { 8, 9, 30 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1shrs", TILEGX_OPC_V1SHRS, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1shrsi", TILEGX_OPC_V1SHRSI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 29 }, { 8, 9, 30 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1shru", TILEGX_OPC_V1SHRU, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1shrui", TILEGX_OPC_V1SHRUI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 29 }, { 8, 9, 30 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1sub", TILEGX_OPC_V1SUB, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v1subuc", TILEGX_OPC_V1SUBUC, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2add", TILEGX_OPC_V2ADD, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2addi", TILEGX_OPC_V2ADDI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2addsc", TILEGX_OPC_V2ADDSC, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2adiffs", TILEGX_OPC_V2ADIFFS, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v2avgs", TILEGX_OPC_V2AVGS, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v2cmpeq", TILEGX_OPC_V2CMPEQ, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2cmpeqi", TILEGX_OPC_V2CMPEQI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2cmples", TILEGX_OPC_V2CMPLES, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2cmpleu", TILEGX_OPC_V2CMPLEU, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2cmplts", TILEGX_OPC_V2CMPLTS, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2cmpltsi", TILEGX_OPC_V2CMPLTSI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2cmpltu", TILEGX_OPC_V2CMPLTU, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2cmpltui", TILEGX_OPC_V2CMPLTUI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2cmpne", TILEGX_OPC_V2CMPNE, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2dotp", TILEGX_OPC_V2DOTP, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v2dotpa", TILEGX_OPC_V2DOTPA, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v2int_h", TILEGX_OPC_V2INT_H, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2int_l", TILEGX_OPC_V2INT_L, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2maxs", TILEGX_OPC_V2MAXS, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2maxsi", TILEGX_OPC_V2MAXSI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2mins", TILEGX_OPC_V2MINS, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2minsi", TILEGX_OPC_V2MINSI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2mnz", TILEGX_OPC_V2MNZ, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2mulfsc", TILEGX_OPC_V2MULFSC, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v2muls", TILEGX_OPC_V2MULS, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v2mults", TILEGX_OPC_V2MULTS, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v2mz", TILEGX_OPC_V2MZ, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2packh", TILEGX_OPC_V2PACKH, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2packl", TILEGX_OPC_V2PACKL, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2packuc", TILEGX_OPC_V2PACKUC, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2sadas", TILEGX_OPC_V2SADAS, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v2sadau", TILEGX_OPC_V2SADAU, 0x1, 3, TREG_ZERO, 1, - { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v2sads", TILEGX_OPC_V2SADS, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v2sadu", TILEGX_OPC_V2SADU, 0x1, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, - }, - { "v2shl", TILEGX_OPC_V2SHL, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2shli", TILEGX_OPC_V2SHLI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 29 }, { 8, 9, 30 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2shlsc", TILEGX_OPC_V2SHLSC, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2shrs", TILEGX_OPC_V2SHRS, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2shrsi", TILEGX_OPC_V2SHRSI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 29 }, { 8, 9, 30 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2shru", TILEGX_OPC_V2SHRU, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2shrui", TILEGX_OPC_V2SHRUI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 29 }, { 8, 9, 30 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2sub", TILEGX_OPC_V2SUB, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v2subsc", TILEGX_OPC_V2SUBSC, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v4add", TILEGX_OPC_V4ADD, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v4addsc", TILEGX_OPC_V4ADDSC, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v4int_h", TILEGX_OPC_V4INT_H, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v4int_l", TILEGX_OPC_V4INT_L, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v4packsc", TILEGX_OPC_V4PACKSC, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v4shl", TILEGX_OPC_V4SHL, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v4shlsc", TILEGX_OPC_V4SHLSC, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v4shrs", TILEGX_OPC_V4SHRS, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v4shru", TILEGX_OPC_V4SHRU, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v4sub", TILEGX_OPC_V4SUB, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "v4subsc", TILEGX_OPC_V4SUBSC, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, - }, - { "wh64", TILEGX_OPC_WH64, 0x2, 1, TREG_ZERO, 1, - { { 0, }, { 9 }, { 0, }, { 0, }, { 0, } }, - }, - { "xor", TILEGX_OPC_XOR, 0xf, 3, TREG_ZERO, 1, - { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, - }, - { "xori", TILEGX_OPC_XORI, 0x3, 3, TREG_ZERO, 1, - { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, - }, - { NULL, TILEGX_OPC_NONE, 0, 0, TREG_ZERO, 0, { { 0, } }, - } -}; -#define BITFIELD(start, size) ((start) | (((1 << (size)) - 1) << 6)) -#define CHILD(array_index) (TILEGX_OPC_NONE + (array_index)) - -static const unsigned short decode_X0_fsm[936] = -{ - BITFIELD(22, 9) /* index 0 */, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_BFEXTS, - TILEGX_OPC_BFEXTS, TILEGX_OPC_BFEXTS, TILEGX_OPC_BFEXTS, TILEGX_OPC_BFEXTU, - TILEGX_OPC_BFEXTU, TILEGX_OPC_BFEXTU, TILEGX_OPC_BFEXTU, TILEGX_OPC_BFINS, - TILEGX_OPC_BFINS, TILEGX_OPC_BFINS, TILEGX_OPC_BFINS, TILEGX_OPC_MM, - TILEGX_OPC_MM, TILEGX_OPC_MM, TILEGX_OPC_MM, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, CHILD(528), CHILD(578), - CHILD(583), CHILD(588), CHILD(593), CHILD(598), TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, CHILD(603), CHILD(620), CHILD(637), CHILD(654), CHILD(671), - CHILD(703), CHILD(797), CHILD(814), CHILD(831), CHILD(848), CHILD(865), - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, CHILD(889), TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), - CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), - CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), - CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), - CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), - CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), - CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), - CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), - CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), - CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), - CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), - BITFIELD(6, 2) /* index 513 */, - TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, CHILD(518), - BITFIELD(8, 2) /* index 518 */, - TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, CHILD(523), - BITFIELD(10, 2) /* index 523 */, - TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_MOVELI, - BITFIELD(20, 2) /* index 528 */, - TILEGX_OPC_NONE, CHILD(533), TILEGX_OPC_ADDXI, CHILD(548), - BITFIELD(6, 2) /* index 533 */, - TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(538), - BITFIELD(8, 2) /* index 538 */, - TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(543), - BITFIELD(10, 2) /* index 543 */, - TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_MOVEI, - BITFIELD(0, 2) /* index 548 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(553), - BITFIELD(2, 2) /* index 553 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(558), - BITFIELD(4, 2) /* index 558 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(563), - BITFIELD(6, 2) /* index 563 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(568), - BITFIELD(8, 2) /* index 568 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(573), - BITFIELD(10, 2) /* index 573 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_INFO, - BITFIELD(20, 2) /* index 578 */, - TILEGX_OPC_CMPEQI, TILEGX_OPC_CMPLTSI, TILEGX_OPC_CMPLTUI, TILEGX_OPC_ORI, - BITFIELD(20, 2) /* index 583 */, - TILEGX_OPC_V1ADDI, TILEGX_OPC_V1CMPEQI, TILEGX_OPC_V1CMPLTSI, - TILEGX_OPC_V1CMPLTUI, - BITFIELD(20, 2) /* index 588 */, - TILEGX_OPC_V1MAXUI, TILEGX_OPC_V1MINUI, TILEGX_OPC_V2ADDI, - TILEGX_OPC_V2CMPEQI, - BITFIELD(20, 2) /* index 593 */, - TILEGX_OPC_V2CMPLTSI, TILEGX_OPC_V2CMPLTUI, TILEGX_OPC_V2MAXSI, - TILEGX_OPC_V2MINSI, - BITFIELD(20, 2) /* index 598 */, - TILEGX_OPC_XORI, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(18, 4) /* index 603 */, - TILEGX_OPC_NONE, TILEGX_OPC_ADDXSC, TILEGX_OPC_ADDX, TILEGX_OPC_ADD, - TILEGX_OPC_AND, TILEGX_OPC_CMOVEQZ, TILEGX_OPC_CMOVNEZ, TILEGX_OPC_CMPEQ, - TILEGX_OPC_CMPLES, TILEGX_OPC_CMPLEU, TILEGX_OPC_CMPLTS, TILEGX_OPC_CMPLTU, - TILEGX_OPC_CMPNE, TILEGX_OPC_CMULAF, TILEGX_OPC_CMULA, TILEGX_OPC_CMULFR, - BITFIELD(18, 4) /* index 620 */, - TILEGX_OPC_CMULF, TILEGX_OPC_CMULHR, TILEGX_OPC_CMULH, TILEGX_OPC_CMUL, - TILEGX_OPC_CRC32_32, TILEGX_OPC_CRC32_8, TILEGX_OPC_DBLALIGN2, - TILEGX_OPC_DBLALIGN4, TILEGX_OPC_DBLALIGN6, TILEGX_OPC_DBLALIGN, - TILEGX_OPC_FDOUBLE_ADDSUB, TILEGX_OPC_FDOUBLE_ADD_FLAGS, - TILEGX_OPC_FDOUBLE_MUL_FLAGS, TILEGX_OPC_FDOUBLE_PACK1, - TILEGX_OPC_FDOUBLE_PACK2, TILEGX_OPC_FDOUBLE_SUB_FLAGS, - BITFIELD(18, 4) /* index 637 */, - TILEGX_OPC_FDOUBLE_UNPACK_MAX, TILEGX_OPC_FDOUBLE_UNPACK_MIN, - TILEGX_OPC_FSINGLE_ADD1, TILEGX_OPC_FSINGLE_ADDSUB2, - TILEGX_OPC_FSINGLE_MUL1, TILEGX_OPC_FSINGLE_MUL2, TILEGX_OPC_FSINGLE_PACK2, - TILEGX_OPC_FSINGLE_SUB1, TILEGX_OPC_MNZ, TILEGX_OPC_MULAX, - TILEGX_OPC_MULA_HS_HS, TILEGX_OPC_MULA_HS_HU, TILEGX_OPC_MULA_HS_LS, - TILEGX_OPC_MULA_HS_LU, TILEGX_OPC_MULA_HU_HU, TILEGX_OPC_MULA_HU_LS, - BITFIELD(18, 4) /* index 654 */, - TILEGX_OPC_MULA_HU_LU, TILEGX_OPC_MULA_LS_LS, TILEGX_OPC_MULA_LS_LU, - TILEGX_OPC_MULA_LU_LU, TILEGX_OPC_MULX, TILEGX_OPC_MUL_HS_HS, - TILEGX_OPC_MUL_HS_HU, TILEGX_OPC_MUL_HS_LS, TILEGX_OPC_MUL_HS_LU, - TILEGX_OPC_MUL_HU_HU, TILEGX_OPC_MUL_HU_LS, TILEGX_OPC_MUL_HU_LU, - TILEGX_OPC_MUL_LS_LS, TILEGX_OPC_MUL_LS_LU, TILEGX_OPC_MUL_LU_LU, - TILEGX_OPC_MZ, - BITFIELD(18, 4) /* index 671 */, - TILEGX_OPC_NOR, CHILD(688), TILEGX_OPC_ROTL, TILEGX_OPC_SHL1ADDX, - TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL2ADDX, TILEGX_OPC_SHL2ADD, - TILEGX_OPC_SHL3ADDX, TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHLX, TILEGX_OPC_SHL, - TILEGX_OPC_SHRS, TILEGX_OPC_SHRUX, TILEGX_OPC_SHRU, TILEGX_OPC_SHUFFLEBYTES, - TILEGX_OPC_SUBXSC, - BITFIELD(12, 2) /* index 688 */, - TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(693), - BITFIELD(14, 2) /* index 693 */, - TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(698), - BITFIELD(16, 2) /* index 698 */, - TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_MOVE, - BITFIELD(18, 4) /* index 703 */, - TILEGX_OPC_SUBX, TILEGX_OPC_SUB, CHILD(720), TILEGX_OPC_V1ADDUC, - TILEGX_OPC_V1ADD, TILEGX_OPC_V1ADIFFU, TILEGX_OPC_V1AVGU, - TILEGX_OPC_V1CMPEQ, TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLEU, - TILEGX_OPC_V1CMPLTS, TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPNE, - TILEGX_OPC_V1DDOTPUSA, TILEGX_OPC_V1DDOTPUS, TILEGX_OPC_V1DOTPA, - BITFIELD(12, 4) /* index 720 */, - TILEGX_OPC_NONE, CHILD(737), CHILD(742), CHILD(747), CHILD(752), CHILD(757), - CHILD(762), CHILD(767), CHILD(772), CHILD(777), CHILD(782), CHILD(787), - CHILD(792), TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(16, 2) /* index 737 */, - TILEGX_OPC_CLZ, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(16, 2) /* index 742 */, - TILEGX_OPC_CTZ, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(16, 2) /* index 747 */, - TILEGX_OPC_FNOP, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(16, 2) /* index 752 */, - TILEGX_OPC_FSINGLE_PACK1, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(16, 2) /* index 757 */, - TILEGX_OPC_NOP, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(16, 2) /* index 762 */, - TILEGX_OPC_PCNT, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(16, 2) /* index 767 */, - TILEGX_OPC_REVBITS, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(16, 2) /* index 772 */, - TILEGX_OPC_REVBYTES, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(16, 2) /* index 777 */, - TILEGX_OPC_TBLIDXB0, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(16, 2) /* index 782 */, - TILEGX_OPC_TBLIDXB1, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(16, 2) /* index 787 */, - TILEGX_OPC_TBLIDXB2, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(16, 2) /* index 792 */, - TILEGX_OPC_TBLIDXB3, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(18, 4) /* index 797 */, - TILEGX_OPC_V1DOTPUSA, TILEGX_OPC_V1DOTPUS, TILEGX_OPC_V1DOTP, - TILEGX_OPC_V1INT_H, TILEGX_OPC_V1INT_L, TILEGX_OPC_V1MAXU, - TILEGX_OPC_V1MINU, TILEGX_OPC_V1MNZ, TILEGX_OPC_V1MULTU, TILEGX_OPC_V1MULUS, - TILEGX_OPC_V1MULU, TILEGX_OPC_V1MZ, TILEGX_OPC_V1SADAU, TILEGX_OPC_V1SADU, - TILEGX_OPC_V1SHL, TILEGX_OPC_V1SHRS, - BITFIELD(18, 4) /* index 814 */, - TILEGX_OPC_V1SHRU, TILEGX_OPC_V1SUBUC, TILEGX_OPC_V1SUB, TILEGX_OPC_V2ADDSC, - TILEGX_OPC_V2ADD, TILEGX_OPC_V2ADIFFS, TILEGX_OPC_V2AVGS, - TILEGX_OPC_V2CMPEQ, TILEGX_OPC_V2CMPLES, TILEGX_OPC_V2CMPLEU, - TILEGX_OPC_V2CMPLTS, TILEGX_OPC_V2CMPLTU, TILEGX_OPC_V2CMPNE, - TILEGX_OPC_V2DOTPA, TILEGX_OPC_V2DOTP, TILEGX_OPC_V2INT_H, - BITFIELD(18, 4) /* index 831 */, - TILEGX_OPC_V2INT_L, TILEGX_OPC_V2MAXS, TILEGX_OPC_V2MINS, TILEGX_OPC_V2MNZ, - TILEGX_OPC_V2MULFSC, TILEGX_OPC_V2MULS, TILEGX_OPC_V2MULTS, TILEGX_OPC_V2MZ, - TILEGX_OPC_V2PACKH, TILEGX_OPC_V2PACKL, TILEGX_OPC_V2PACKUC, - TILEGX_OPC_V2SADAS, TILEGX_OPC_V2SADAU, TILEGX_OPC_V2SADS, - TILEGX_OPC_V2SADU, TILEGX_OPC_V2SHLSC, - BITFIELD(18, 4) /* index 848 */, - TILEGX_OPC_V2SHL, TILEGX_OPC_V2SHRS, TILEGX_OPC_V2SHRU, TILEGX_OPC_V2SUBSC, - TILEGX_OPC_V2SUB, TILEGX_OPC_V4ADDSC, TILEGX_OPC_V4ADD, TILEGX_OPC_V4INT_H, - TILEGX_OPC_V4INT_L, TILEGX_OPC_V4PACKSC, TILEGX_OPC_V4SHLSC, - TILEGX_OPC_V4SHL, TILEGX_OPC_V4SHRS, TILEGX_OPC_V4SHRU, TILEGX_OPC_V4SUBSC, - TILEGX_OPC_V4SUB, - BITFIELD(18, 3) /* index 865 */, - CHILD(874), CHILD(877), CHILD(880), CHILD(883), CHILD(886), TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(21, 1) /* index 874 */, - TILEGX_OPC_XOR, TILEGX_OPC_NONE, - BITFIELD(21, 1) /* index 877 */, - TILEGX_OPC_V1DDOTPUA, TILEGX_OPC_NONE, - BITFIELD(21, 1) /* index 880 */, - TILEGX_OPC_V1DDOTPU, TILEGX_OPC_NONE, - BITFIELD(21, 1) /* index 883 */, - TILEGX_OPC_V1DOTPUA, TILEGX_OPC_NONE, - BITFIELD(21, 1) /* index 886 */, - TILEGX_OPC_V1DOTPU, TILEGX_OPC_NONE, - BITFIELD(18, 4) /* index 889 */, - TILEGX_OPC_NONE, TILEGX_OPC_ROTLI, TILEGX_OPC_SHLI, TILEGX_OPC_SHLXI, - TILEGX_OPC_SHRSI, TILEGX_OPC_SHRUI, TILEGX_OPC_SHRUXI, TILEGX_OPC_V1SHLI, - TILEGX_OPC_V1SHRSI, TILEGX_OPC_V1SHRUI, TILEGX_OPC_V2SHLI, - TILEGX_OPC_V2SHRSI, TILEGX_OPC_V2SHRUI, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, - BITFIELD(0, 2) /* index 906 */, - TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, - CHILD(911), - BITFIELD(2, 2) /* index 911 */, - TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, - CHILD(916), - BITFIELD(4, 2) /* index 916 */, - TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, - CHILD(921), - BITFIELD(6, 2) /* index 921 */, - TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, - CHILD(926), - BITFIELD(8, 2) /* index 926 */, - TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, - CHILD(931), - BITFIELD(10, 2) /* index 931 */, - TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, - TILEGX_OPC_INFOL, -}; - -static const unsigned short decode_X1_fsm[1206] = -{ - BITFIELD(53, 9) /* index 0 */, - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), - CHILD(513), CHILD(513), CHILD(513), CHILD(513), TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, - TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_BEQZT, - TILEGX_OPC_BEQZT, TILEGX_OPC_BEQZ, TILEGX_OPC_BEQZ, TILEGX_OPC_BGEZT, - TILEGX_OPC_BGEZT, TILEGX_OPC_BGEZ, TILEGX_OPC_BGEZ, TILEGX_OPC_BGTZT, - TILEGX_OPC_BGTZT, TILEGX_OPC_BGTZ, TILEGX_OPC_BGTZ, TILEGX_OPC_BLBCT, - TILEGX_OPC_BLBCT, TILEGX_OPC_BLBC, TILEGX_OPC_BLBC, TILEGX_OPC_BLBST, - TILEGX_OPC_BLBST, TILEGX_OPC_BLBS, TILEGX_OPC_BLBS, TILEGX_OPC_BLEZT, - TILEGX_OPC_BLEZT, TILEGX_OPC_BLEZ, TILEGX_OPC_BLEZ, TILEGX_OPC_BLTZT, - TILEGX_OPC_BLTZT, TILEGX_OPC_BLTZ, TILEGX_OPC_BLTZ, TILEGX_OPC_BNEZT, - TILEGX_OPC_BNEZT, TILEGX_OPC_BNEZ, TILEGX_OPC_BNEZ, CHILD(528), CHILD(578), - CHILD(598), CHILD(663), CHILD(683), CHILD(688), CHILD(693), CHILD(698), - CHILD(703), CHILD(708), CHILD(713), CHILD(718), TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_JAL, - TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, - TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, - TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, - TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, - TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, - TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, - TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, - TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_J, TILEGX_OPC_J, - TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, - TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, - TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, - TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, - TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, - TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, - CHILD(723), CHILD(740), CHILD(772), CHILD(789), CHILD(1108), CHILD(1125), - CHILD(1142), TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, CHILD(1159), TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, CHILD(1176), CHILD(1176), CHILD(1176), - CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), - CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), - CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), - CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), - CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), - CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), - CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), - CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), - CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), - CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), - CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), - CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), - CHILD(1176), - BITFIELD(37, 2) /* index 513 */, - TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, CHILD(518), - BITFIELD(39, 2) /* index 518 */, - TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, CHILD(523), - BITFIELD(41, 2) /* index 523 */, - TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_MOVELI, - BITFIELD(51, 2) /* index 528 */, - TILEGX_OPC_NONE, CHILD(533), TILEGX_OPC_ADDXI, CHILD(548), - BITFIELD(37, 2) /* index 533 */, - TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(538), - BITFIELD(39, 2) /* index 538 */, - TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(543), - BITFIELD(41, 2) /* index 543 */, - TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_MOVEI, - BITFIELD(31, 2) /* index 548 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(553), - BITFIELD(33, 2) /* index 553 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(558), - BITFIELD(35, 2) /* index 558 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(563), - BITFIELD(37, 2) /* index 563 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(568), - BITFIELD(39, 2) /* index 568 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(573), - BITFIELD(41, 2) /* index 573 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_INFO, - BITFIELD(51, 2) /* index 578 */, - TILEGX_OPC_CMPEQI, TILEGX_OPC_CMPLTSI, TILEGX_OPC_CMPLTUI, CHILD(583), - BITFIELD(31, 2) /* index 583 */, - TILEGX_OPC_LD1S_ADD, TILEGX_OPC_LD1S_ADD, TILEGX_OPC_LD1S_ADD, CHILD(588), - BITFIELD(33, 2) /* index 588 */, - TILEGX_OPC_LD1S_ADD, TILEGX_OPC_LD1S_ADD, TILEGX_OPC_LD1S_ADD, CHILD(593), - BITFIELD(35, 2) /* index 593 */, - TILEGX_OPC_LD1S_ADD, TILEGX_OPC_LD1S_ADD, TILEGX_OPC_LD1S_ADD, - TILEGX_OPC_PREFETCH_ADD_L1_FAULT, - BITFIELD(51, 2) /* index 598 */, - CHILD(603), CHILD(618), CHILD(633), CHILD(648), - BITFIELD(31, 2) /* index 603 */, - TILEGX_OPC_LD1U_ADD, TILEGX_OPC_LD1U_ADD, TILEGX_OPC_LD1U_ADD, CHILD(608), - BITFIELD(33, 2) /* index 608 */, - TILEGX_OPC_LD1U_ADD, TILEGX_OPC_LD1U_ADD, TILEGX_OPC_LD1U_ADD, CHILD(613), - BITFIELD(35, 2) /* index 613 */, - TILEGX_OPC_LD1U_ADD, TILEGX_OPC_LD1U_ADD, TILEGX_OPC_LD1U_ADD, - TILEGX_OPC_PREFETCH_ADD_L1, - BITFIELD(31, 2) /* index 618 */, - TILEGX_OPC_LD2S_ADD, TILEGX_OPC_LD2S_ADD, TILEGX_OPC_LD2S_ADD, CHILD(623), - BITFIELD(33, 2) /* index 623 */, - TILEGX_OPC_LD2S_ADD, TILEGX_OPC_LD2S_ADD, TILEGX_OPC_LD2S_ADD, CHILD(628), - BITFIELD(35, 2) /* index 628 */, - TILEGX_OPC_LD2S_ADD, TILEGX_OPC_LD2S_ADD, TILEGX_OPC_LD2S_ADD, - TILEGX_OPC_PREFETCH_ADD_L2_FAULT, - BITFIELD(31, 2) /* index 633 */, - TILEGX_OPC_LD2U_ADD, TILEGX_OPC_LD2U_ADD, TILEGX_OPC_LD2U_ADD, CHILD(638), - BITFIELD(33, 2) /* index 638 */, - TILEGX_OPC_LD2U_ADD, TILEGX_OPC_LD2U_ADD, TILEGX_OPC_LD2U_ADD, CHILD(643), - BITFIELD(35, 2) /* index 643 */, - TILEGX_OPC_LD2U_ADD, TILEGX_OPC_LD2U_ADD, TILEGX_OPC_LD2U_ADD, - TILEGX_OPC_PREFETCH_ADD_L2, - BITFIELD(31, 2) /* index 648 */, - TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD, CHILD(653), - BITFIELD(33, 2) /* index 653 */, - TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD, CHILD(658), - BITFIELD(35, 2) /* index 658 */, - TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD, - TILEGX_OPC_PREFETCH_ADD_L3_FAULT, - BITFIELD(51, 2) /* index 663 */, - CHILD(668), TILEGX_OPC_LDNT1S_ADD, TILEGX_OPC_LDNT1U_ADD, - TILEGX_OPC_LDNT2S_ADD, - BITFIELD(31, 2) /* index 668 */, - TILEGX_OPC_LD4U_ADD, TILEGX_OPC_LD4U_ADD, TILEGX_OPC_LD4U_ADD, CHILD(673), - BITFIELD(33, 2) /* index 673 */, - TILEGX_OPC_LD4U_ADD, TILEGX_OPC_LD4U_ADD, TILEGX_OPC_LD4U_ADD, CHILD(678), - BITFIELD(35, 2) /* index 678 */, - TILEGX_OPC_LD4U_ADD, TILEGX_OPC_LD4U_ADD, TILEGX_OPC_LD4U_ADD, - TILEGX_OPC_PREFETCH_ADD_L3, - BITFIELD(51, 2) /* index 683 */, - TILEGX_OPC_LDNT2U_ADD, TILEGX_OPC_LDNT4S_ADD, TILEGX_OPC_LDNT4U_ADD, - TILEGX_OPC_LDNT_ADD, - BITFIELD(51, 2) /* index 688 */, - TILEGX_OPC_LD_ADD, TILEGX_OPC_LDNA_ADD, TILEGX_OPC_MFSPR, TILEGX_OPC_MTSPR, - BITFIELD(51, 2) /* index 693 */, - TILEGX_OPC_ORI, TILEGX_OPC_ST1_ADD, TILEGX_OPC_ST2_ADD, TILEGX_OPC_ST4_ADD, - BITFIELD(51, 2) /* index 698 */, - TILEGX_OPC_STNT1_ADD, TILEGX_OPC_STNT2_ADD, TILEGX_OPC_STNT4_ADD, - TILEGX_OPC_STNT_ADD, - BITFIELD(51, 2) /* index 703 */, - TILEGX_OPC_ST_ADD, TILEGX_OPC_V1ADDI, TILEGX_OPC_V1CMPEQI, - TILEGX_OPC_V1CMPLTSI, - BITFIELD(51, 2) /* index 708 */, - TILEGX_OPC_V1CMPLTUI, TILEGX_OPC_V1MAXUI, TILEGX_OPC_V1MINUI, - TILEGX_OPC_V2ADDI, - BITFIELD(51, 2) /* index 713 */, - TILEGX_OPC_V2CMPEQI, TILEGX_OPC_V2CMPLTSI, TILEGX_OPC_V2CMPLTUI, - TILEGX_OPC_V2MAXSI, - BITFIELD(51, 2) /* index 718 */, - TILEGX_OPC_V2MINSI, TILEGX_OPC_XORI, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(49, 4) /* index 723 */, - TILEGX_OPC_NONE, TILEGX_OPC_ADDXSC, TILEGX_OPC_ADDX, TILEGX_OPC_ADD, - TILEGX_OPC_AND, TILEGX_OPC_CMPEQ, TILEGX_OPC_CMPEXCH4, TILEGX_OPC_CMPEXCH, - TILEGX_OPC_CMPLES, TILEGX_OPC_CMPLEU, TILEGX_OPC_CMPLTS, TILEGX_OPC_CMPLTU, - TILEGX_OPC_CMPNE, TILEGX_OPC_DBLALIGN2, TILEGX_OPC_DBLALIGN4, - TILEGX_OPC_DBLALIGN6, - BITFIELD(49, 4) /* index 740 */, - TILEGX_OPC_EXCH4, TILEGX_OPC_EXCH, TILEGX_OPC_FETCHADD4, - TILEGX_OPC_FETCHADDGEZ4, TILEGX_OPC_FETCHADDGEZ, TILEGX_OPC_FETCHADD, - TILEGX_OPC_FETCHAND4, TILEGX_OPC_FETCHAND, TILEGX_OPC_FETCHOR4, - TILEGX_OPC_FETCHOR, TILEGX_OPC_MNZ, TILEGX_OPC_MZ, TILEGX_OPC_NOR, - CHILD(757), TILEGX_OPC_ROTL, TILEGX_OPC_SHL1ADDX, - BITFIELD(43, 2) /* index 757 */, - TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(762), - BITFIELD(45, 2) /* index 762 */, - TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(767), - BITFIELD(47, 2) /* index 767 */, - TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_MOVE, - BITFIELD(49, 4) /* index 772 */, - TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL2ADDX, TILEGX_OPC_SHL2ADD, - TILEGX_OPC_SHL3ADDX, TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHLX, TILEGX_OPC_SHL, - TILEGX_OPC_SHRS, TILEGX_OPC_SHRUX, TILEGX_OPC_SHRU, TILEGX_OPC_ST1, - TILEGX_OPC_ST2, TILEGX_OPC_ST4, TILEGX_OPC_STNT1, TILEGX_OPC_STNT2, - TILEGX_OPC_STNT4, - BITFIELD(46, 7) /* index 789 */, - TILEGX_OPC_STNT, TILEGX_OPC_STNT, TILEGX_OPC_STNT, TILEGX_OPC_STNT, - TILEGX_OPC_STNT, TILEGX_OPC_STNT, TILEGX_OPC_STNT, TILEGX_OPC_STNT, - TILEGX_OPC_ST, TILEGX_OPC_ST, TILEGX_OPC_ST, TILEGX_OPC_ST, TILEGX_OPC_ST, - TILEGX_OPC_ST, TILEGX_OPC_ST, TILEGX_OPC_ST, TILEGX_OPC_SUBXSC, - TILEGX_OPC_SUBXSC, TILEGX_OPC_SUBXSC, TILEGX_OPC_SUBXSC, TILEGX_OPC_SUBXSC, - TILEGX_OPC_SUBXSC, TILEGX_OPC_SUBXSC, TILEGX_OPC_SUBXSC, TILEGX_OPC_SUBX, - TILEGX_OPC_SUBX, TILEGX_OPC_SUBX, TILEGX_OPC_SUBX, TILEGX_OPC_SUBX, - TILEGX_OPC_SUBX, TILEGX_OPC_SUBX, TILEGX_OPC_SUBX, TILEGX_OPC_SUB, - TILEGX_OPC_SUB, TILEGX_OPC_SUB, TILEGX_OPC_SUB, TILEGX_OPC_SUB, - TILEGX_OPC_SUB, TILEGX_OPC_SUB, TILEGX_OPC_SUB, CHILD(918), CHILD(927), - CHILD(1006), CHILD(1090), CHILD(1099), TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_V1ADDUC, TILEGX_OPC_V1ADDUC, TILEGX_OPC_V1ADDUC, - TILEGX_OPC_V1ADDUC, TILEGX_OPC_V1ADDUC, TILEGX_OPC_V1ADDUC, - TILEGX_OPC_V1ADDUC, TILEGX_OPC_V1ADDUC, TILEGX_OPC_V1ADD, TILEGX_OPC_V1ADD, - TILEGX_OPC_V1ADD, TILEGX_OPC_V1ADD, TILEGX_OPC_V1ADD, TILEGX_OPC_V1ADD, - TILEGX_OPC_V1ADD, TILEGX_OPC_V1ADD, TILEGX_OPC_V1CMPEQ, TILEGX_OPC_V1CMPEQ, - TILEGX_OPC_V1CMPEQ, TILEGX_OPC_V1CMPEQ, TILEGX_OPC_V1CMPEQ, - TILEGX_OPC_V1CMPEQ, TILEGX_OPC_V1CMPEQ, TILEGX_OPC_V1CMPEQ, - TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLES, - TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLES, - TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLEU, - TILEGX_OPC_V1CMPLEU, TILEGX_OPC_V1CMPLEU, TILEGX_OPC_V1CMPLEU, - TILEGX_OPC_V1CMPLEU, TILEGX_OPC_V1CMPLEU, TILEGX_OPC_V1CMPLEU, - TILEGX_OPC_V1CMPLEU, TILEGX_OPC_V1CMPLTS, TILEGX_OPC_V1CMPLTS, - TILEGX_OPC_V1CMPLTS, TILEGX_OPC_V1CMPLTS, TILEGX_OPC_V1CMPLTS, - TILEGX_OPC_V1CMPLTS, TILEGX_OPC_V1CMPLTS, TILEGX_OPC_V1CMPLTS, - TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPLTU, - TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPLTU, - TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPNE, - TILEGX_OPC_V1CMPNE, TILEGX_OPC_V1CMPNE, TILEGX_OPC_V1CMPNE, - TILEGX_OPC_V1CMPNE, TILEGX_OPC_V1CMPNE, TILEGX_OPC_V1CMPNE, - TILEGX_OPC_V1CMPNE, TILEGX_OPC_V1INT_H, TILEGX_OPC_V1INT_H, - TILEGX_OPC_V1INT_H, TILEGX_OPC_V1INT_H, TILEGX_OPC_V1INT_H, - TILEGX_OPC_V1INT_H, TILEGX_OPC_V1INT_H, TILEGX_OPC_V1INT_H, - TILEGX_OPC_V1INT_L, TILEGX_OPC_V1INT_L, TILEGX_OPC_V1INT_L, - TILEGX_OPC_V1INT_L, TILEGX_OPC_V1INT_L, TILEGX_OPC_V1INT_L, - TILEGX_OPC_V1INT_L, TILEGX_OPC_V1INT_L, - BITFIELD(43, 3) /* index 918 */, - TILEGX_OPC_NONE, TILEGX_OPC_DRAIN, TILEGX_OPC_DTLBPR, TILEGX_OPC_FINV, - TILEGX_OPC_FLUSHWB, TILEGX_OPC_FLUSH, TILEGX_OPC_FNOP, TILEGX_OPC_ICOH, - BITFIELD(43, 3) /* index 927 */, - CHILD(936), TILEGX_OPC_INV, TILEGX_OPC_IRET, TILEGX_OPC_JALRP, - TILEGX_OPC_JALR, TILEGX_OPC_JRP, TILEGX_OPC_JR, CHILD(991), - BITFIELD(31, 2) /* index 936 */, - CHILD(941), CHILD(966), TILEGX_OPC_ILL, TILEGX_OPC_ILL, - BITFIELD(33, 2) /* index 941 */, - TILEGX_OPC_ILL, TILEGX_OPC_ILL, TILEGX_OPC_ILL, CHILD(946), - BITFIELD(35, 2) /* index 946 */, - TILEGX_OPC_ILL, CHILD(951), TILEGX_OPC_ILL, TILEGX_OPC_ILL, - BITFIELD(37, 2) /* index 951 */, - TILEGX_OPC_ILL, CHILD(956), TILEGX_OPC_ILL, TILEGX_OPC_ILL, - BITFIELD(39, 2) /* index 956 */, - TILEGX_OPC_ILL, CHILD(961), TILEGX_OPC_ILL, TILEGX_OPC_ILL, - BITFIELD(41, 2) /* index 961 */, - TILEGX_OPC_ILL, TILEGX_OPC_ILL, TILEGX_OPC_BPT, TILEGX_OPC_ILL, - BITFIELD(33, 2) /* index 966 */, - TILEGX_OPC_ILL, TILEGX_OPC_ILL, TILEGX_OPC_ILL, CHILD(971), - BITFIELD(35, 2) /* index 971 */, - TILEGX_OPC_ILL, CHILD(976), TILEGX_OPC_ILL, TILEGX_OPC_ILL, - BITFIELD(37, 2) /* index 976 */, - TILEGX_OPC_ILL, CHILD(981), TILEGX_OPC_ILL, TILEGX_OPC_ILL, - BITFIELD(39, 2) /* index 981 */, - TILEGX_OPC_ILL, CHILD(986), TILEGX_OPC_ILL, TILEGX_OPC_ILL, - BITFIELD(41, 2) /* index 986 */, - TILEGX_OPC_ILL, TILEGX_OPC_ILL, TILEGX_OPC_RAISE, TILEGX_OPC_ILL, - BITFIELD(31, 2) /* index 991 */, - TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, CHILD(996), - BITFIELD(33, 2) /* index 996 */, - TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, CHILD(1001), - BITFIELD(35, 2) /* index 1001 */, - TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, - TILEGX_OPC_PREFETCH_L1_FAULT, - BITFIELD(43, 3) /* index 1006 */, - CHILD(1015), CHILD(1030), CHILD(1045), CHILD(1060), CHILD(1075), - TILEGX_OPC_LDNA, TILEGX_OPC_LDNT1S, TILEGX_OPC_LDNT1U, - BITFIELD(31, 2) /* index 1015 */, - TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, CHILD(1020), - BITFIELD(33, 2) /* index 1020 */, - TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, CHILD(1025), - BITFIELD(35, 2) /* index 1025 */, - TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_PREFETCH, - BITFIELD(31, 2) /* index 1030 */, - TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, CHILD(1035), - BITFIELD(33, 2) /* index 1035 */, - TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, CHILD(1040), - BITFIELD(35, 2) /* index 1040 */, - TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, - TILEGX_OPC_PREFETCH_L2_FAULT, - BITFIELD(31, 2) /* index 1045 */, - TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, CHILD(1050), - BITFIELD(33, 2) /* index 1050 */, - TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, CHILD(1055), - BITFIELD(35, 2) /* index 1055 */, - TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_PREFETCH_L2, - BITFIELD(31, 2) /* index 1060 */, - TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, CHILD(1065), - BITFIELD(33, 2) /* index 1065 */, - TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, CHILD(1070), - BITFIELD(35, 2) /* index 1070 */, - TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, - TILEGX_OPC_PREFETCH_L3_FAULT, - BITFIELD(31, 2) /* index 1075 */, - TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, CHILD(1080), - BITFIELD(33, 2) /* index 1080 */, - TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, CHILD(1085), - BITFIELD(35, 2) /* index 1085 */, - TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, TILEGX_OPC_PREFETCH_L3, - BITFIELD(43, 3) /* index 1090 */, - TILEGX_OPC_LDNT2S, TILEGX_OPC_LDNT2U, TILEGX_OPC_LDNT4S, TILEGX_OPC_LDNT4U, - TILEGX_OPC_LDNT, TILEGX_OPC_LD, TILEGX_OPC_LNK, TILEGX_OPC_MF, - BITFIELD(43, 3) /* index 1099 */, - TILEGX_OPC_NAP, TILEGX_OPC_NOP, TILEGX_OPC_SWINT0, TILEGX_OPC_SWINT1, - TILEGX_OPC_SWINT2, TILEGX_OPC_SWINT3, TILEGX_OPC_WH64, TILEGX_OPC_NONE, - BITFIELD(49, 4) /* index 1108 */, - TILEGX_OPC_V1MAXU, TILEGX_OPC_V1MINU, TILEGX_OPC_V1MNZ, TILEGX_OPC_V1MZ, - TILEGX_OPC_V1SHL, TILEGX_OPC_V1SHRS, TILEGX_OPC_V1SHRU, TILEGX_OPC_V1SUBUC, - TILEGX_OPC_V1SUB, TILEGX_OPC_V2ADDSC, TILEGX_OPC_V2ADD, TILEGX_OPC_V2CMPEQ, - TILEGX_OPC_V2CMPLES, TILEGX_OPC_V2CMPLEU, TILEGX_OPC_V2CMPLTS, - TILEGX_OPC_V2CMPLTU, - BITFIELD(49, 4) /* index 1125 */, - TILEGX_OPC_V2CMPNE, TILEGX_OPC_V2INT_H, TILEGX_OPC_V2INT_L, - TILEGX_OPC_V2MAXS, TILEGX_OPC_V2MINS, TILEGX_OPC_V2MNZ, TILEGX_OPC_V2MZ, - TILEGX_OPC_V2PACKH, TILEGX_OPC_V2PACKL, TILEGX_OPC_V2PACKUC, - TILEGX_OPC_V2SHLSC, TILEGX_OPC_V2SHL, TILEGX_OPC_V2SHRS, TILEGX_OPC_V2SHRU, - TILEGX_OPC_V2SUBSC, TILEGX_OPC_V2SUB, - BITFIELD(49, 4) /* index 1142 */, - TILEGX_OPC_V4ADDSC, TILEGX_OPC_V4ADD, TILEGX_OPC_V4INT_H, - TILEGX_OPC_V4INT_L, TILEGX_OPC_V4PACKSC, TILEGX_OPC_V4SHLSC, - TILEGX_OPC_V4SHL, TILEGX_OPC_V4SHRS, TILEGX_OPC_V4SHRU, TILEGX_OPC_V4SUBSC, - TILEGX_OPC_V4SUB, TILEGX_OPC_XOR, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(49, 4) /* index 1159 */, - TILEGX_OPC_NONE, TILEGX_OPC_ROTLI, TILEGX_OPC_SHLI, TILEGX_OPC_SHLXI, - TILEGX_OPC_SHRSI, TILEGX_OPC_SHRUI, TILEGX_OPC_SHRUXI, TILEGX_OPC_V1SHLI, - TILEGX_OPC_V1SHRSI, TILEGX_OPC_V1SHRUI, TILEGX_OPC_V2SHLI, - TILEGX_OPC_V2SHRSI, TILEGX_OPC_V2SHRUI, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, - BITFIELD(31, 2) /* index 1176 */, - TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, - CHILD(1181), - BITFIELD(33, 2) /* index 1181 */, - TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, - CHILD(1186), - BITFIELD(35, 2) /* index 1186 */, - TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, - CHILD(1191), - BITFIELD(37, 2) /* index 1191 */, - TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, - CHILD(1196), - BITFIELD(39, 2) /* index 1196 */, - TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, - CHILD(1201), - BITFIELD(41, 2) /* index 1201 */, - TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, - TILEGX_OPC_INFOL, -}; - -static const unsigned short decode_Y0_fsm[178] = -{ - BITFIELD(27, 4) /* index 0 */, - CHILD(17), TILEGX_OPC_ADDXI, CHILD(32), TILEGX_OPC_CMPEQI, - TILEGX_OPC_CMPLTSI, CHILD(62), CHILD(67), CHILD(118), CHILD(123), - CHILD(128), CHILD(133), CHILD(153), CHILD(158), CHILD(163), CHILD(168), - CHILD(173), - BITFIELD(6, 2) /* index 17 */, - TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(22), - BITFIELD(8, 2) /* index 22 */, - TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(27), - BITFIELD(10, 2) /* index 27 */, - TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_MOVEI, - BITFIELD(0, 2) /* index 32 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(37), - BITFIELD(2, 2) /* index 37 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(42), - BITFIELD(4, 2) /* index 42 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(47), - BITFIELD(6, 2) /* index 47 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(52), - BITFIELD(8, 2) /* index 52 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(57), - BITFIELD(10, 2) /* index 57 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_INFO, - BITFIELD(18, 2) /* index 62 */, - TILEGX_OPC_ADDX, TILEGX_OPC_ADD, TILEGX_OPC_SUBX, TILEGX_OPC_SUB, - BITFIELD(15, 5) /* index 67 */, - TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD, - TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD, - TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL2ADD, - TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL2ADD, - TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL2ADD, - TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, - TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, - TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, CHILD(100), - CHILD(109), TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(12, 3) /* index 100 */, - TILEGX_OPC_NONE, TILEGX_OPC_CLZ, TILEGX_OPC_CTZ, TILEGX_OPC_FNOP, - TILEGX_OPC_FSINGLE_PACK1, TILEGX_OPC_NOP, TILEGX_OPC_PCNT, - TILEGX_OPC_REVBITS, - BITFIELD(12, 3) /* index 109 */, - TILEGX_OPC_REVBYTES, TILEGX_OPC_TBLIDXB0, TILEGX_OPC_TBLIDXB1, - TILEGX_OPC_TBLIDXB2, TILEGX_OPC_TBLIDXB3, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - TILEGX_OPC_NONE, - BITFIELD(18, 2) /* index 118 */, - TILEGX_OPC_CMPLES, TILEGX_OPC_CMPLEU, TILEGX_OPC_CMPLTS, TILEGX_OPC_CMPLTU, - BITFIELD(18, 2) /* index 123 */, - TILEGX_OPC_CMPEQ, TILEGX_OPC_CMPNE, TILEGX_OPC_MULAX, TILEGX_OPC_MULX, - BITFIELD(18, 2) /* index 128 */, - TILEGX_OPC_CMOVEQZ, TILEGX_OPC_CMOVNEZ, TILEGX_OPC_MNZ, TILEGX_OPC_MZ, - BITFIELD(18, 2) /* index 133 */, - TILEGX_OPC_AND, TILEGX_OPC_NOR, CHILD(138), TILEGX_OPC_XOR, - BITFIELD(12, 2) /* index 138 */, - TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(143), - BITFIELD(14, 2) /* index 143 */, - TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(148), - BITFIELD(16, 2) /* index 148 */, - TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_MOVE, - BITFIELD(18, 2) /* index 153 */, - TILEGX_OPC_ROTL, TILEGX_OPC_SHL, TILEGX_OPC_SHRS, TILEGX_OPC_SHRU, - BITFIELD(18, 2) /* index 158 */, - TILEGX_OPC_NONE, TILEGX_OPC_SHL1ADDX, TILEGX_OPC_SHL2ADDX, - TILEGX_OPC_SHL3ADDX, - BITFIELD(18, 2) /* index 163 */, - TILEGX_OPC_MUL_HS_HS, TILEGX_OPC_MUL_HU_HU, TILEGX_OPC_MUL_LS_LS, - TILEGX_OPC_MUL_LU_LU, - BITFIELD(18, 2) /* index 168 */, - TILEGX_OPC_MULA_HS_HS, TILEGX_OPC_MULA_HU_HU, TILEGX_OPC_MULA_LS_LS, - TILEGX_OPC_MULA_LU_LU, - BITFIELD(18, 2) /* index 173 */, - TILEGX_OPC_ROTLI, TILEGX_OPC_SHLI, TILEGX_OPC_SHRSI, TILEGX_OPC_SHRUI, -}; - -static const unsigned short decode_Y1_fsm[167] = -{ - BITFIELD(58, 4) /* index 0 */, - TILEGX_OPC_NONE, CHILD(17), TILEGX_OPC_ADDXI, CHILD(32), TILEGX_OPC_CMPEQI, - TILEGX_OPC_CMPLTSI, CHILD(62), CHILD(67), CHILD(117), CHILD(122), - CHILD(127), CHILD(132), CHILD(152), CHILD(157), CHILD(162), TILEGX_OPC_NONE, - BITFIELD(37, 2) /* index 17 */, - TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(22), - BITFIELD(39, 2) /* index 22 */, - TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(27), - BITFIELD(41, 2) /* index 27 */, - TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_MOVEI, - BITFIELD(31, 2) /* index 32 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(37), - BITFIELD(33, 2) /* index 37 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(42), - BITFIELD(35, 2) /* index 42 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(47), - BITFIELD(37, 2) /* index 47 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(52), - BITFIELD(39, 2) /* index 52 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(57), - BITFIELD(41, 2) /* index 57 */, - TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_INFO, - BITFIELD(49, 2) /* index 62 */, - TILEGX_OPC_ADDX, TILEGX_OPC_ADD, TILEGX_OPC_SUBX, TILEGX_OPC_SUB, - BITFIELD(47, 4) /* index 67 */, - TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD, - TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL2ADD, - TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL3ADD, - TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, CHILD(84), - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, - BITFIELD(43, 3) /* index 84 */, - CHILD(93), CHILD(96), CHILD(99), CHILD(102), CHILD(105), CHILD(108), - CHILD(111), CHILD(114), - BITFIELD(46, 1) /* index 93 */, - TILEGX_OPC_NONE, TILEGX_OPC_FNOP, - BITFIELD(46, 1) /* index 96 */, - TILEGX_OPC_NONE, TILEGX_OPC_ILL, - BITFIELD(46, 1) /* index 99 */, - TILEGX_OPC_NONE, TILEGX_OPC_JALRP, - BITFIELD(46, 1) /* index 102 */, - TILEGX_OPC_NONE, TILEGX_OPC_JALR, - BITFIELD(46, 1) /* index 105 */, - TILEGX_OPC_NONE, TILEGX_OPC_JRP, - BITFIELD(46, 1) /* index 108 */, - TILEGX_OPC_NONE, TILEGX_OPC_JR, - BITFIELD(46, 1) /* index 111 */, - TILEGX_OPC_NONE, TILEGX_OPC_LNK, - BITFIELD(46, 1) /* index 114 */, - TILEGX_OPC_NONE, TILEGX_OPC_NOP, - BITFIELD(49, 2) /* index 117 */, - TILEGX_OPC_CMPLES, TILEGX_OPC_CMPLEU, TILEGX_OPC_CMPLTS, TILEGX_OPC_CMPLTU, - BITFIELD(49, 2) /* index 122 */, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_CMPEQ, TILEGX_OPC_CMPNE, - BITFIELD(49, 2) /* index 127 */, - TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_MNZ, TILEGX_OPC_MZ, - BITFIELD(49, 2) /* index 132 */, - TILEGX_OPC_AND, TILEGX_OPC_NOR, CHILD(137), TILEGX_OPC_XOR, - BITFIELD(43, 2) /* index 137 */, - TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(142), - BITFIELD(45, 2) /* index 142 */, - TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(147), - BITFIELD(47, 2) /* index 147 */, - TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_MOVE, - BITFIELD(49, 2) /* index 152 */, - TILEGX_OPC_ROTL, TILEGX_OPC_SHL, TILEGX_OPC_SHRS, TILEGX_OPC_SHRU, - BITFIELD(49, 2) /* index 157 */, - TILEGX_OPC_NONE, TILEGX_OPC_SHL1ADDX, TILEGX_OPC_SHL2ADDX, - TILEGX_OPC_SHL3ADDX, - BITFIELD(49, 2) /* index 162 */, - TILEGX_OPC_ROTLI, TILEGX_OPC_SHLI, TILEGX_OPC_SHRSI, TILEGX_OPC_SHRUI, -}; - -static const unsigned short decode_Y2_fsm[118] = -{ - BITFIELD(62, 2) /* index 0 */, - TILEGX_OPC_NONE, CHILD(5), CHILD(66), CHILD(109), - BITFIELD(55, 3) /* index 5 */, - CHILD(14), CHILD(14), CHILD(14), CHILD(17), CHILD(40), CHILD(40), CHILD(40), - CHILD(43), - BITFIELD(26, 1) /* index 14 */, - TILEGX_OPC_LD1S, TILEGX_OPC_LD1U, - BITFIELD(26, 1) /* index 17 */, - CHILD(20), CHILD(30), - BITFIELD(51, 2) /* index 20 */, - TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, CHILD(25), - BITFIELD(53, 2) /* index 25 */, - TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, - TILEGX_OPC_PREFETCH_L1_FAULT, - BITFIELD(51, 2) /* index 30 */, - TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, CHILD(35), - BITFIELD(53, 2) /* index 35 */, - TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_PREFETCH, - BITFIELD(26, 1) /* index 40 */, - TILEGX_OPC_LD2S, TILEGX_OPC_LD2U, - BITFIELD(26, 1) /* index 43 */, - CHILD(46), CHILD(56), - BITFIELD(51, 2) /* index 46 */, - TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, CHILD(51), - BITFIELD(53, 2) /* index 51 */, - TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, - TILEGX_OPC_PREFETCH_L2_FAULT, - BITFIELD(51, 2) /* index 56 */, - TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, CHILD(61), - BITFIELD(53, 2) /* index 61 */, - TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_PREFETCH_L2, - BITFIELD(56, 2) /* index 66 */, - CHILD(71), CHILD(74), CHILD(90), CHILD(93), - BITFIELD(26, 1) /* index 71 */, - TILEGX_OPC_NONE, TILEGX_OPC_LD4S, - BITFIELD(26, 1) /* index 74 */, - TILEGX_OPC_NONE, CHILD(77), - BITFIELD(51, 2) /* index 77 */, - TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, CHILD(82), - BITFIELD(53, 2) /* index 82 */, - TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, CHILD(87), - BITFIELD(55, 1) /* index 87 */, - TILEGX_OPC_LD4S, TILEGX_OPC_PREFETCH_L3_FAULT, - BITFIELD(26, 1) /* index 90 */, - TILEGX_OPC_LD4U, TILEGX_OPC_LD, - BITFIELD(26, 1) /* index 93 */, - CHILD(96), TILEGX_OPC_LD, - BITFIELD(51, 2) /* index 96 */, - TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, CHILD(101), - BITFIELD(53, 2) /* index 101 */, - TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, CHILD(106), - BITFIELD(55, 1) /* index 106 */, - TILEGX_OPC_LD4U, TILEGX_OPC_PREFETCH_L3, - BITFIELD(26, 1) /* index 109 */, - CHILD(112), CHILD(115), - BITFIELD(57, 1) /* index 112 */, - TILEGX_OPC_ST1, TILEGX_OPC_ST4, - BITFIELD(57, 1) /* index 115 */, - TILEGX_OPC_ST2, TILEGX_OPC_ST, -}; - -#undef BITFIELD -#undef CHILD -const unsigned short * const -tilegx_bundle_decoder_fsms[TILEGX_NUM_PIPELINE_ENCODINGS] = -{ - decode_X0_fsm, - decode_X1_fsm, - decode_Y0_fsm, - decode_Y1_fsm, - decode_Y2_fsm -}; -const struct tilegx_operand tilegx_operands[35] = -{ - { - TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_IMM8_X0), - 8, 1, 0, 0, 0, 0, - create_Imm8_X0, get_Imm8_X0 - }, - { - TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_IMM8_X1), - 8, 1, 0, 0, 0, 0, - create_Imm8_X1, get_Imm8_X1 - }, - { - TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_IMM8_Y0), - 8, 1, 0, 0, 0, 0, - create_Imm8_Y0, get_Imm8_Y0 - }, - { - TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_IMM8_Y1), - 8, 1, 0, 0, 0, 0, - create_Imm8_Y1, get_Imm8_Y1 - }, - { - TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_IMM16_X0_HW0_LAST), - 16, 1, 0, 0, 0, 0, - create_Imm16_X0, get_Imm16_X0 - }, - { - TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_IMM16_X1_HW0_LAST), - 16, 1, 0, 0, 0, 0, - create_Imm16_X1, get_Imm16_X1 - }, - { - TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 0, 1, 0, 0, - create_Dest_X0, get_Dest_X0 - }, - { - TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcA_X0, get_SrcA_X0 - }, - { - TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 0, 1, 0, 0, - create_Dest_X1, get_Dest_X1 - }, - { - TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcA_X1, get_SrcA_X1 - }, - { - TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 0, 1, 0, 0, - create_Dest_Y0, get_Dest_Y0 - }, - { - TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcA_Y0, get_SrcA_Y0 - }, - { - TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 0, 1, 0, 0, - create_Dest_Y1, get_Dest_Y1 - }, - { - TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcA_Y1, get_SrcA_Y1 - }, - { - TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcA_Y2, get_SrcA_Y2 - }, - { - TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 1, 0, 0, - create_SrcA_X1, get_SrcA_X1 - }, - { - TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcB_X0, get_SrcB_X0 - }, - { - TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcB_X1, get_SrcB_X1 - }, - { - TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcB_Y0, get_SrcB_Y0 - }, - { - TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcB_Y1, get_SrcB_Y1 - }, - { - TILEGX_OP_TYPE_ADDRESS, BFD_RELOC(TILEGX_BROFF_X1), - 17, 1, 0, 0, 1, TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES, - create_BrOff_X1, get_BrOff_X1 - }, - { - TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_MMSTART_X0), - 6, 0, 0, 0, 0, 0, - create_BFStart_X0, get_BFStart_X0 - }, - { - TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_MMEND_X0), - 6, 0, 0, 0, 0, 0, - create_BFEnd_X0, get_BFEnd_X0 - }, - { - TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 1, 0, 0, - create_Dest_X0, get_Dest_X0 - }, - { - TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 1, 0, 0, - create_Dest_Y0, get_Dest_Y0 - }, - { - TILEGX_OP_TYPE_ADDRESS, BFD_RELOC(TILEGX_JUMPOFF_X1), - 27, 1, 0, 0, 1, TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES, - create_JumpOff_X1, get_JumpOff_X1 - }, - { - TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 0, 1, 0, 0, - create_SrcBDest_Y2, get_SrcBDest_Y2 - }, - { - TILEGX_OP_TYPE_SPR, BFD_RELOC(TILEGX_MF_IMM14_X1), - 14, 0, 0, 0, 0, 0, - create_MF_Imm14_X1, get_MF_Imm14_X1 - }, - { - TILEGX_OP_TYPE_SPR, BFD_RELOC(TILEGX_MT_IMM14_X1), - 14, 0, 0, 0, 0, 0, - create_MT_Imm14_X1, get_MT_Imm14_X1 - }, - { - TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_SHAMT_X0), - 6, 0, 0, 0, 0, 0, - create_ShAmt_X0, get_ShAmt_X0 - }, - { - TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_SHAMT_X1), - 6, 0, 0, 0, 0, 0, - create_ShAmt_X1, get_ShAmt_X1 - }, - { - TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_SHAMT_Y0), - 6, 0, 0, 0, 0, 0, - create_ShAmt_Y0, get_ShAmt_Y0 - }, - { - TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_SHAMT_Y1), - 6, 0, 0, 0, 0, 0, - create_ShAmt_Y1, get_ShAmt_Y1 - }, - { - TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), - 6, 0, 1, 0, 0, 0, - create_SrcBDest_Y2, get_SrcBDest_Y2 - }, - { - TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_DEST_IMM8_X1), - 8, 1, 0, 0, 0, 0, - create_Dest_Imm8_X1, get_Dest_Imm8_X1 - } -}; - - - - -/* Given a set of bundle bits and the lookup FSM for a specific pipe, - * returns which instruction the bundle contains in that pipe. - */ -static const struct tilegx_opcode * -find_opcode(tilegx_bundle_bits bits, const unsigned short *table) -{ - int index = 0; - - while (1) - { - unsigned short bitspec = table[index]; - unsigned int bitfield = - ((unsigned int)(bits >> (bitspec & 63))) & (bitspec >> 6); - - unsigned short next = table[index + 1 + bitfield]; - if (next <= TILEGX_OPC_NONE) - return &tilegx_opcodes[next]; - - index = next - TILEGX_OPC_NONE; - } -} - - -int -parse_insn_tilegx(tilegx_bundle_bits bits, - unsigned long long pc, - struct tilegx_decoded_instruction - decoded[TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE]) -{ - int num_instructions = 0; - int pipe; - - int min_pipe, max_pipe; - if ((bits & TILEGX_BUNDLE_MODE_MASK) == 0) - { - min_pipe = TILEGX_PIPELINE_X0; - max_pipe = TILEGX_PIPELINE_X1; - } - else - { - min_pipe = TILEGX_PIPELINE_Y0; - max_pipe = TILEGX_PIPELINE_Y2; - } - - /* For each pipe, find an instruction that fits. */ - for (pipe = min_pipe; pipe <= max_pipe; pipe++) - { - const struct tilegx_opcode *opc; - struct tilegx_decoded_instruction *d; - int i; - - d = &decoded[num_instructions++]; - opc = find_opcode (bits, tilegx_bundle_decoder_fsms[pipe]); - d->opcode = opc; - - /* Decode each operand, sign extending, etc. as appropriate. */ - for (i = 0; i < opc->num_operands; i++) - { - const struct tilegx_operand *op = - &tilegx_operands[opc->operands[pipe][i]]; - int raw_opval = op->extract (bits); - long long opval; - - if (op->is_signed) - { - /* Sign-extend the operand. */ - int shift = (int)((sizeof(int) * 8) - op->num_bits); - raw_opval = (raw_opval << shift) >> shift; - } - - /* Adjust PC-relative scaled branch offsets. */ - if (op->type == TILEGX_OP_TYPE_ADDRESS) - opval = (raw_opval * TILEGX_BUNDLE_SIZE_IN_BYTES) + pc; - else - opval = raw_opval; - - /* Record the final value. */ - d->operands[i] = op; - d->operand_values[i] = opval; - } - } - - return num_instructions; -} diff --git a/arch/tile/kernel/time.c b/arch/tile/kernel/time.c deleted file mode 100644 index f95d65f3162b..000000000000 --- a/arch/tile/kernel/time.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Support the cycle counter clocksource and tile timer clock event device. - */ - -#include <linux/time.h> -#include <linux/timex.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> -#include <linux/hardirq.h> -#include <linux/sched.h> -#include <linux/sched/clock.h> -#include <linux/smp.h> -#include <linux/delay.h> -#include <linux/module.h> -#include <linux/timekeeper_internal.h> -#include <asm/irq_regs.h> -#include <asm/traps.h> -#include <asm/vdso.h> -#include <hv/hypervisor.h> -#include <arch/interrupts.h> -#include <arch/spr_def.h> - - -/* - * Define the cycle counter clock source. - */ - -/* How many cycles per second we are running at. */ -static cycles_t cycles_per_sec __ro_after_init; - -cycles_t get_clock_rate(void) -{ - return cycles_per_sec; -} - -#if CHIP_HAS_SPLIT_CYCLE() -cycles_t get_cycles(void) -{ - unsigned int high = __insn_mfspr(SPR_CYCLE_HIGH); - unsigned int low = __insn_mfspr(SPR_CYCLE_LOW); - unsigned int high2 = __insn_mfspr(SPR_CYCLE_HIGH); - - while (unlikely(high != high2)) { - low = __insn_mfspr(SPR_CYCLE_LOW); - high = high2; - high2 = __insn_mfspr(SPR_CYCLE_HIGH); - } - - return (((cycles_t)high) << 32) | low; -} -EXPORT_SYMBOL(get_cycles); -#endif - -/* - * We use a relatively small shift value so that sched_clock() - * won't wrap around very often. - */ -#define SCHED_CLOCK_SHIFT 10 - -static unsigned long sched_clock_mult __ro_after_init; - -static cycles_t clocksource_get_cycles(struct clocksource *cs) -{ - return get_cycles(); -} - -static struct clocksource cycle_counter_cs = { - .name = "cycle counter", - .rating = 300, - .read = clocksource_get_cycles, - .mask = CLOCKSOURCE_MASK(64), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -/* - * Called very early from setup_arch() to set cycles_per_sec. - * We initialize it early so we can use it to set up loops_per_jiffy. - */ -void __init setup_clock(void) -{ - cycles_per_sec = hv_sysconf(HV_SYSCONF_CPU_SPEED); - sched_clock_mult = - clocksource_hz2mult(cycles_per_sec, SCHED_CLOCK_SHIFT); -} - -void __init calibrate_delay(void) -{ - loops_per_jiffy = get_clock_rate() / HZ; - pr_info("Clock rate yields %lu.%02lu BogoMIPS (lpj=%lu)\n", - loops_per_jiffy / (500000 / HZ), - (loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy); -} - -/* Called fairly late in init/main.c, but before we go smp. */ -void __init time_init(void) -{ - /* Initialize and register the clock source. */ - clocksource_register_hz(&cycle_counter_cs, cycles_per_sec); - - /* Start up the tile-timer interrupt source on the boot cpu. */ - setup_tile_timer(); -} - -/* - * Define the tile timer clock event device. The timer is driven by - * the TILE_TIMER_CONTROL register, which consists of a 31-bit down - * counter, plus bit 31, which signifies that the counter has wrapped - * from zero to (2**31) - 1. The INT_TILE_TIMER interrupt will be - * raised as long as bit 31 is set. - * - * The TILE_MINSEC value represents the largest range of real-time - * we can possibly cover with the timer, based on MAX_TICK combined - * with the slowest reasonable clock rate we might run at. - */ - -#define MAX_TICK 0x7fffffff /* we have 31 bits of countdown timer */ -#define TILE_MINSEC 5 /* timer covers no more than 5 seconds */ - -static int tile_timer_set_next_event(unsigned long ticks, - struct clock_event_device *evt) -{ - BUG_ON(ticks > MAX_TICK); - __insn_mtspr(SPR_TILE_TIMER_CONTROL, ticks); - arch_local_irq_unmask_now(INT_TILE_TIMER); - return 0; -} - -/* - * Whenever anyone tries to change modes, we just mask interrupts - * and wait for the next event to get set. - */ -static int tile_timer_shutdown(struct clock_event_device *evt) -{ - arch_local_irq_mask_now(INT_TILE_TIMER); - return 0; -} - -/* - * Set min_delta_ns to 1 microsecond, since it takes about - * that long to fire the interrupt. - */ -static DEFINE_PER_CPU(struct clock_event_device, tile_timer) = { - .name = "tile timer", - .features = CLOCK_EVT_FEAT_ONESHOT, - .min_delta_ns = 1000, - .min_delta_ticks = 1, - .max_delta_ticks = MAX_TICK, - .rating = 100, - .irq = -1, - .set_next_event = tile_timer_set_next_event, - .set_state_shutdown = tile_timer_shutdown, - .set_state_oneshot = tile_timer_shutdown, - .set_state_oneshot_stopped = tile_timer_shutdown, - .tick_resume = tile_timer_shutdown, -}; - -void setup_tile_timer(void) -{ - struct clock_event_device *evt = this_cpu_ptr(&tile_timer); - - /* Fill in fields that are speed-specific. */ - clockevents_calc_mult_shift(evt, cycles_per_sec, TILE_MINSEC); - evt->max_delta_ns = clockevent_delta2ns(MAX_TICK, evt); - - /* Mark as being for this cpu only. */ - evt->cpumask = cpumask_of(smp_processor_id()); - - /* Start out with timer not firing. */ - arch_local_irq_mask_now(INT_TILE_TIMER); - - /* Register tile timer. */ - clockevents_register_device(evt); -} - -/* Called from the interrupt vector. */ -void do_timer_interrupt(struct pt_regs *regs, int fault_num) -{ - struct pt_regs *old_regs = set_irq_regs(regs); - struct clock_event_device *evt = this_cpu_ptr(&tile_timer); - - /* - * Mask the timer interrupt here, since we are a oneshot timer - * and there are now by definition no events pending. - */ - arch_local_irq_mask(INT_TILE_TIMER); - - /* Track time spent here in an interrupt context */ - irq_enter(); - - /* Track interrupt count. */ - __this_cpu_inc(irq_stat.irq_timer_count); - - /* Call the generic timer handler */ - evt->event_handler(evt); - - /* - * Track time spent against the current process again and - * process any softirqs if they are waiting. - */ - irq_exit(); - - set_irq_regs(old_regs); -} - -/* - * Scheduler clock - returns current time in nanosec units. - * Note that with LOCKDEP, this is called during lockdep_init(), and - * we will claim that sched_clock() is zero for a little while, until - * we run setup_clock(), above. - */ -unsigned long long sched_clock(void) -{ - return mult_frac(get_cycles(), - sched_clock_mult, 1ULL << SCHED_CLOCK_SHIFT); -} - -int setup_profiling_timer(unsigned int multiplier) -{ - return -EINVAL; -} - -/* - * Use the tile timer to convert nsecs to core clock cycles, relying - * on it having the same frequency as SPR_CYCLE. - */ -cycles_t ns2cycles(unsigned long nsecs) -{ - /* - * We do not have to disable preemption here as each core has the same - * clock frequency. - */ - struct clock_event_device *dev = raw_cpu_ptr(&tile_timer); - - /* - * as in clocksource.h and x86's timer.h, we split the calculation - * into 2 parts to avoid unecessary overflow of the intermediate - * value. This will not lead to any loss of precision. - */ - u64 quot = (u64)nsecs >> dev->shift; - u64 rem = (u64)nsecs & ((1ULL << dev->shift) - 1); - return quot * dev->mult + ((rem * dev->mult) >> dev->shift); -} - -void update_vsyscall_tz(void) -{ - write_seqcount_begin(&vdso_data->tz_seq); - vdso_data->tz_minuteswest = sys_tz.tz_minuteswest; - vdso_data->tz_dsttime = sys_tz.tz_dsttime; - write_seqcount_end(&vdso_data->tz_seq); -} - -void update_vsyscall(struct timekeeper *tk) -{ - if (tk->tkr_mono.clock != &cycle_counter_cs) - return; - - write_seqcount_begin(&vdso_data->tb_seq); - - vdso_data->cycle_last = tk->tkr_mono.cycle_last; - vdso_data->mask = tk->tkr_mono.mask; - vdso_data->mult = tk->tkr_mono.mult; - vdso_data->shift = tk->tkr_mono.shift; - - vdso_data->wall_time_sec = tk->xtime_sec; - vdso_data->wall_time_snsec = tk->tkr_mono.xtime_nsec; - - vdso_data->monotonic_time_sec = tk->xtime_sec - + tk->wall_to_monotonic.tv_sec; - vdso_data->monotonic_time_snsec = tk->tkr_mono.xtime_nsec - + ((u64)tk->wall_to_monotonic.tv_nsec - << tk->tkr_mono.shift); - while (vdso_data->monotonic_time_snsec >= - (((u64)NSEC_PER_SEC) << tk->tkr_mono.shift)) { - vdso_data->monotonic_time_snsec -= - ((u64)NSEC_PER_SEC) << tk->tkr_mono.shift; - vdso_data->monotonic_time_sec++; - } - - vdso_data->wall_time_coarse_sec = tk->xtime_sec; - vdso_data->wall_time_coarse_nsec = (long)(tk->tkr_mono.xtime_nsec >> - tk->tkr_mono.shift); - - vdso_data->monotonic_time_coarse_sec = - vdso_data->wall_time_coarse_sec + tk->wall_to_monotonic.tv_sec; - vdso_data->monotonic_time_coarse_nsec = - vdso_data->wall_time_coarse_nsec + tk->wall_to_monotonic.tv_nsec; - - while (vdso_data->monotonic_time_coarse_nsec >= NSEC_PER_SEC) { - vdso_data->monotonic_time_coarse_nsec -= NSEC_PER_SEC; - vdso_data->monotonic_time_coarse_sec++; - } - - write_seqcount_end(&vdso_data->tb_seq); -} diff --git a/arch/tile/kernel/tlb.c b/arch/tile/kernel/tlb.c deleted file mode 100644 index f23b53515671..000000000000 --- a/arch/tile/kernel/tlb.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - */ - -#include <linux/cpumask.h> -#include <linux/module.h> -#include <linux/hugetlb.h> -#include <asm/tlbflush.h> -#include <asm/homecache.h> -#include <hv/hypervisor.h> - -/* From tlbflush.h */ -DEFINE_PER_CPU(int, current_asid); -int min_asid, max_asid; - -/* - * Note that we flush the L1I (for VM_EXEC pages) as well as the TLB - * so that when we are unmapping an executable page, we also flush it. - * Combined with flushing the L1I at context switch time, this means - * we don't have to do any other icache flushes. - */ - -void flush_tlb_mm(struct mm_struct *mm) -{ - HV_Remote_ASID asids[NR_CPUS]; - int i = 0, cpu; - for_each_cpu(cpu, mm_cpumask(mm)) { - HV_Remote_ASID *asid = &asids[i++]; - asid->y = cpu / smp_topology.width; - asid->x = cpu % smp_topology.width; - asid->asid = per_cpu(current_asid, cpu); - } - flush_remote(0, HV_FLUSH_EVICT_L1I, mm_cpumask(mm), - 0, 0, 0, NULL, asids, i); -} - -void flush_tlb_current_task(void) -{ - flush_tlb_mm(current->mm); -} - -void flush_tlb_page_mm(struct vm_area_struct *vma, struct mm_struct *mm, - unsigned long va) -{ - unsigned long size = vma_kernel_pagesize(vma); - int cache = (vma->vm_flags & VM_EXEC) ? HV_FLUSH_EVICT_L1I : 0; - flush_remote(0, cache, mm_cpumask(mm), - va, size, size, mm_cpumask(mm), NULL, 0); -} - -void flush_tlb_page(struct vm_area_struct *vma, unsigned long va) -{ - flush_tlb_page_mm(vma, vma->vm_mm, va); -} -EXPORT_SYMBOL(flush_tlb_page); - -void flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) -{ - unsigned long size = vma_kernel_pagesize(vma); - struct mm_struct *mm = vma->vm_mm; - int cache = (vma->vm_flags & VM_EXEC) ? HV_FLUSH_EVICT_L1I : 0; - flush_remote(0, cache, mm_cpumask(mm), start, end - start, size, - mm_cpumask(mm), NULL, 0); -} - -void flush_tlb_all(void) -{ - int i; - for (i = 0; ; ++i) { - HV_VirtAddrRange r = hv_inquire_virtual(i); - if (r.size == 0) - break; - flush_remote(0, HV_FLUSH_EVICT_L1I, cpu_online_mask, - r.start, r.size, PAGE_SIZE, cpu_online_mask, - NULL, 0); - flush_remote(0, 0, NULL, - r.start, r.size, HPAGE_SIZE, cpu_online_mask, - NULL, 0); - } -} - -/* - * Callers need to flush the L1I themselves if necessary, e.g. for - * kernel module unload. Otherwise we assume callers are not using - * executable pgprot_t's. Using EVICT_L1I means that dataplane cpus - * will get an unnecessary interrupt otherwise. - */ -void flush_tlb_kernel_range(unsigned long start, unsigned long end) -{ - flush_remote(0, 0, NULL, - start, end - start, PAGE_SIZE, cpu_online_mask, NULL, 0); -} diff --git a/arch/tile/kernel/traps.c b/arch/tile/kernel/traps.c deleted file mode 100644 index 83a7186198d7..000000000000 --- a/arch/tile/kernel/traps.c +++ /dev/null @@ -1,421 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/sched.h> -#include <linux/sched/debug.h> -#include <linux/kernel.h> -#include <linux/kprobes.h> -#include <linux/kdebug.h> -#include <linux/module.h> -#include <linux/reboot.h> -#include <linux/uaccess.h> -#include <linux/ptrace.h> -#include <linux/hardirq.h> -#include <linux/nmi.h> -#include <asm/stack.h> -#include <asm/traps.h> -#include <asm/setup.h> - -#include <arch/interrupts.h> -#include <arch/spr_def.h> -#include <arch/opcode.h> - -void __init trap_init(void) -{ - /* Nothing needed here since we link code at .intrpt */ -} - -int unaligned_fixup = 1; - -static int __init setup_unaligned_fixup(char *str) -{ - /* - * Say "=-1" to completely disable it. If you just do "=0", we - * will still parse the instruction, then fire a SIGBUS with - * the correct address from inside the single_step code. - */ - if (kstrtoint(str, 0, &unaligned_fixup) != 0) - return 0; - - pr_info("Fixups for unaligned data accesses are %s\n", - unaligned_fixup >= 0 ? - (unaligned_fixup ? "enabled" : "disabled") : - "completely disabled"); - return 1; -} -__setup("unaligned_fixup=", setup_unaligned_fixup); - -#if CHIP_HAS_TILE_DMA() - -static int dma_disabled; - -static int __init nodma(char *str) -{ - pr_info("User-space DMA is disabled\n"); - dma_disabled = 1; - return 1; -} -__setup("nodma", nodma); - -/* How to decode SPR_GPV_REASON */ -#define IRET_ERROR (1U << 31) -#define MT_ERROR (1U << 30) -#define MF_ERROR (1U << 29) -#define SPR_INDEX ((1U << 15) - 1) -#define SPR_MPL_SHIFT 9 /* starting bit position for MPL encoded in SPR */ - -/* - * See if this GPV is just to notify the kernel of SPR use and we can - * retry the user instruction after adjusting some MPLs suitably. - */ -static int retry_gpv(unsigned int gpv_reason) -{ - int mpl; - - if (gpv_reason & IRET_ERROR) - return 0; - - BUG_ON((gpv_reason & (MT_ERROR|MF_ERROR)) == 0); - mpl = (gpv_reason & SPR_INDEX) >> SPR_MPL_SHIFT; - if (mpl == INT_DMA_NOTIFY && !dma_disabled) { - /* User is turning on DMA. Allow it and retry. */ - printk(KERN_DEBUG "Process %d/%s is now enabled for DMA\n", - current->pid, current->comm); - BUG_ON(current->thread.tile_dma_state.enabled); - current->thread.tile_dma_state.enabled = 1; - grant_dma_mpls(); - return 1; - } - - return 0; -} - -#endif /* CHIP_HAS_TILE_DMA() */ - -extern tile_bundle_bits bpt_code; - -asm(".pushsection .rodata.bpt_code,\"a\";" - ".align 8;" - "bpt_code: bpt;" - ".size bpt_code,.-bpt_code;" - ".popsection"); - -static int special_ill(tile_bundle_bits bundle, int *sigp, int *codep) -{ - int sig, code, maxcode; - - if (bundle == bpt_code) { - *sigp = SIGTRAP; - *codep = TRAP_BRKPT; - return 1; - } - - /* If it's a "raise" bundle, then "ill" must be in pipe X1. */ -#ifdef __tilegx__ - if ((bundle & TILEGX_BUNDLE_MODE_MASK) != 0) - return 0; - if (get_Opcode_X1(bundle) != RRR_0_OPCODE_X1) - return 0; - if (get_RRROpcodeExtension_X1(bundle) != UNARY_RRR_0_OPCODE_X1) - return 0; - if (get_UnaryOpcodeExtension_X1(bundle) != ILL_UNARY_OPCODE_X1) - return 0; -#else - if (bundle & TILEPRO_BUNDLE_Y_ENCODING_MASK) - return 0; - if (get_Opcode_X1(bundle) != SHUN_0_OPCODE_X1) - return 0; - if (get_UnShOpcodeExtension_X1(bundle) != UN_0_SHUN_0_OPCODE_X1) - return 0; - if (get_UnOpcodeExtension_X1(bundle) != ILL_UN_0_SHUN_0_OPCODE_X1) - return 0; -#endif - - /* Check that the magic distinguishers are set to mean "raise". */ - if (get_Dest_X1(bundle) != 29 || get_SrcA_X1(bundle) != 37) - return 0; - - /* There must be an "addli zero, zero, VAL" in X0. */ - if (get_Opcode_X0(bundle) != ADDLI_OPCODE_X0) - return 0; - if (get_Dest_X0(bundle) != TREG_ZERO) - return 0; - if (get_SrcA_X0(bundle) != TREG_ZERO) - return 0; - - /* - * Validate the proposed signal number and si_code value. - * Note that we embed these in the static instruction itself - * so that we perturb the register state as little as possible - * at the time of the actual fault; it's unlikely you'd ever - * need to dynamically choose which kind of fault to raise - * from user space. - */ - sig = get_Imm16_X0(bundle) & 0x3f; - switch (sig) { - case SIGILL: - maxcode = NSIGILL; - break; - case SIGFPE: - maxcode = NSIGFPE; - break; - case SIGSEGV: - maxcode = NSIGSEGV; - break; - case SIGBUS: - maxcode = NSIGBUS; - break; - case SIGTRAP: - maxcode = NSIGTRAP; - break; - default: - return 0; - } - code = (get_Imm16_X0(bundle) >> 6) & 0xf; - if (code <= 0 || code > maxcode) - return 0; - - /* Make it the requested signal. */ - *sigp = sig; - *codep = code; - return 1; -} - -static const char *const int_name[] = { - [INT_MEM_ERROR] = "Memory error", - [INT_ILL] = "Illegal instruction", - [INT_GPV] = "General protection violation", - [INT_UDN_ACCESS] = "UDN access", - [INT_IDN_ACCESS] = "IDN access", -#if CHIP_HAS_SN() - [INT_SN_ACCESS] = "SN access", -#endif - [INT_SWINT_3] = "Software interrupt 3", - [INT_SWINT_2] = "Software interrupt 2", - [INT_SWINT_0] = "Software interrupt 0", - [INT_UNALIGN_DATA] = "Unaligned data", - [INT_DOUBLE_FAULT] = "Double fault", -#ifdef __tilegx__ - [INT_ILL_TRANS] = "Illegal virtual address", -#endif -}; - -static int do_bpt(struct pt_regs *regs) -{ - unsigned long bundle, bcode, bpt; - - bundle = *(unsigned long *)instruction_pointer(regs); - - /* - * bpt shoule be { bpt; nop }, which is 0x286a44ae51485000ULL. - * we encode the unused least significant bits for other purpose. - */ - bpt = bundle & ~((1ULL << 12) - 1); - if (bpt != TILE_BPT_BUNDLE) - return 0; - - bcode = bundle & ((1ULL << 12) - 1); - /* - * notify the kprobe handlers, if instruction is likely to - * pertain to them. - */ - switch (bcode) { - /* breakpoint_insn */ - case 0: - notify_die(DIE_BREAK, "debug", regs, bundle, - INT_ILL, SIGTRAP); - break; - /* compiled_bpt */ - case DIE_COMPILED_BPT: - notify_die(DIE_COMPILED_BPT, "debug", regs, bundle, - INT_ILL, SIGTRAP); - break; - /* breakpoint2_insn */ - case DIE_SSTEPBP: - notify_die(DIE_SSTEPBP, "single_step", regs, bundle, - INT_ILL, SIGTRAP); - break; - default: - return 0; - } - - return 1; -} - -void __kprobes do_trap(struct pt_regs *regs, int fault_num, - unsigned long reason) -{ - siginfo_t info; - int signo, code; - unsigned long address = 0; - tile_bundle_bits instr; - int is_kernel = !user_mode(regs); - - clear_siginfo(&info); - - /* Handle breakpoints, etc. */ - if (is_kernel && fault_num == INT_ILL && do_bpt(regs)) - return; - - /* Re-enable interrupts, if they were previously enabled. */ - if (!(regs->flags & PT_FLAGS_DISABLE_IRQ)) - local_irq_enable(); - - /* - * If it hits in kernel mode and we can't fix it up, just exit the - * current process and hope for the best. - */ - if (is_kernel) { - const char *name; - char buf[100]; - if (fixup_exception(regs)) /* ILL_TRANS or UNALIGN_DATA */ - return; - if (fault_num >= 0 && - fault_num < ARRAY_SIZE(int_name) && - int_name[fault_num] != NULL) - name = int_name[fault_num]; - else - name = "Unknown interrupt"; - if (fault_num == INT_GPV) - snprintf(buf, sizeof(buf), "; GPV_REASON %#lx", reason); -#ifdef __tilegx__ - else if (fault_num == INT_ILL_TRANS) - snprintf(buf, sizeof(buf), "; address %#lx", reason); -#endif - else - buf[0] = '\0'; - pr_alert("Kernel took bad trap %d (%s) at PC %#lx%s\n", - fault_num, name, regs->pc, buf); - show_regs(regs); - do_exit(SIGKILL); /* FIXME: implement i386 die() */ - } - - switch (fault_num) { - case INT_MEM_ERROR: - signo = SIGBUS; - code = BUS_OBJERR; - break; - case INT_ILL: - if (copy_from_user(&instr, (void __user *)regs->pc, - sizeof(instr))) { - pr_err("Unreadable instruction for INT_ILL: %#lx\n", - regs->pc); - do_exit(SIGKILL); - } - if (!special_ill(instr, &signo, &code)) { - signo = SIGILL; - code = ILL_ILLOPC; - } - address = regs->pc; - break; - case INT_GPV: -#if CHIP_HAS_TILE_DMA() - if (retry_gpv(reason)) - return; -#endif - /*FALLTHROUGH*/ - case INT_UDN_ACCESS: - case INT_IDN_ACCESS: -#if CHIP_HAS_SN() - case INT_SN_ACCESS: -#endif - signo = SIGILL; - code = ILL_PRVREG; - address = regs->pc; - break; - case INT_SWINT_3: - case INT_SWINT_2: - case INT_SWINT_0: - signo = SIGILL; - code = ILL_ILLTRP; - address = regs->pc; - break; - case INT_UNALIGN_DATA: -#ifndef __tilegx__ /* Emulated support for single step debugging */ - if (unaligned_fixup >= 0) { - struct single_step_state *state = - current_thread_info()->step_state; - if (!state || - (void __user *)(regs->pc) != state->buffer) { - single_step_once(regs); - return; - } - } -#endif - signo = SIGBUS; - code = BUS_ADRALN; - address = 0; - break; - case INT_DOUBLE_FAULT: - /* - * For double fault, "reason" is actually passed as - * SYSTEM_SAVE_K_2, the hypervisor's double-fault info, so - * we can provide the original fault number rather than - * the uninteresting "INT_DOUBLE_FAULT" so the user can - * learn what actually struck while PL0 ICS was set. - */ - fault_num = reason; - signo = SIGILL; - code = ILL_DBLFLT; - address = regs->pc; - break; -#ifdef __tilegx__ - case INT_ILL_TRANS: { - /* Avoid a hardware erratum with the return address stack. */ - fill_ra_stack(); - - signo = SIGSEGV; - address = reason; - code = SEGV_MAPERR; - break; - } -#endif - default: - panic("Unexpected do_trap interrupt number %d", fault_num); - } - - info.si_signo = signo; - info.si_code = code; - info.si_addr = (void __user *)address; - if (signo == SIGILL) - info.si_trapno = fault_num; - if (signo != SIGTRAP) - trace_unhandled_signal("trap", regs, address, signo); - force_sig_info(signo, &info, current); -} - -void do_nmi(struct pt_regs *regs, int fault_num, unsigned long reason) -{ - nmi_enter(); - switch (reason) { -#ifdef arch_trigger_cpumask_backtrace - case TILE_NMI_DUMP_STACK: - nmi_cpu_backtrace(regs); - break; -#endif - default: - panic("Unexpected do_nmi type %ld", reason); - } - nmi_exit(); -} - -/* Deprecated function currently only used here. */ -extern void _dump_stack(int dummy, ulong pc, ulong lr, ulong sp, ulong r52); - -void kernel_double_fault(int dummy, ulong pc, ulong lr, ulong sp, ulong r52) -{ - _dump_stack(dummy, pc, lr, sp, r52); - pr_emerg("Double fault: exiting\n"); - machine_halt(); -} diff --git a/arch/tile/kernel/unaligned.c b/arch/tile/kernel/unaligned.c deleted file mode 100644 index 77a0b6b6a2a1..000000000000 --- a/arch/tile/kernel/unaligned.c +++ /dev/null @@ -1,1603 +0,0 @@ -/* - * Copyright 2013 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * A code-rewriter that handles unaligned exception. - */ - -#include <linux/smp.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/sched/debug.h> -#include <linux/sched/task.h> -#include <linux/thread_info.h> -#include <linux/uaccess.h> -#include <linux/mman.h> -#include <linux/types.h> -#include <linux/err.h> -#include <linux/extable.h> -#include <linux/compat.h> -#include <linux/prctl.h> -#include <asm/cacheflush.h> -#include <asm/traps.h> -#include <linux/uaccess.h> -#include <asm/unaligned.h> -#include <arch/abi.h> -#include <arch/spr_def.h> -#include <arch/opcode.h> - - -/* - * This file handles unaligned exception for tile-Gx. The tilepro's unaligned - * exception is supported out of single_step.c - */ - -int unaligned_printk; - -static int __init setup_unaligned_printk(char *str) -{ - long val; - if (kstrtol(str, 0, &val) != 0) - return 0; - unaligned_printk = val; - pr_info("Printk for each unaligned data accesses is %s\n", - unaligned_printk ? "enabled" : "disabled"); - return 1; -} -__setup("unaligned_printk=", setup_unaligned_printk); - -unsigned int unaligned_fixup_count; - -#ifdef __tilegx__ - -/* - * Unalign data jit fixup code fragement. Reserved space is 128 bytes. - * The 1st 64-bit word saves fault PC address, 2nd word is the fault - * instruction bundle followed by 14 JIT bundles. - */ - -struct unaligned_jit_fragment { - unsigned long pc; - tilegx_bundle_bits bundle; - tilegx_bundle_bits insn[14]; -}; - -/* - * Check if a nop or fnop at bundle's pipeline X0. - */ - -static bool is_bundle_x0_nop(tilegx_bundle_bits bundle) -{ - return (((get_UnaryOpcodeExtension_X0(bundle) == - NOP_UNARY_OPCODE_X0) && - (get_RRROpcodeExtension_X0(bundle) == - UNARY_RRR_0_OPCODE_X0) && - (get_Opcode_X0(bundle) == - RRR_0_OPCODE_X0)) || - ((get_UnaryOpcodeExtension_X0(bundle) == - FNOP_UNARY_OPCODE_X0) && - (get_RRROpcodeExtension_X0(bundle) == - UNARY_RRR_0_OPCODE_X0) && - (get_Opcode_X0(bundle) == - RRR_0_OPCODE_X0))); -} - -/* - * Check if nop or fnop at bundle's pipeline X1. - */ - -static bool is_bundle_x1_nop(tilegx_bundle_bits bundle) -{ - return (((get_UnaryOpcodeExtension_X1(bundle) == - NOP_UNARY_OPCODE_X1) && - (get_RRROpcodeExtension_X1(bundle) == - UNARY_RRR_0_OPCODE_X1) && - (get_Opcode_X1(bundle) == - RRR_0_OPCODE_X1)) || - ((get_UnaryOpcodeExtension_X1(bundle) == - FNOP_UNARY_OPCODE_X1) && - (get_RRROpcodeExtension_X1(bundle) == - UNARY_RRR_0_OPCODE_X1) && - (get_Opcode_X1(bundle) == - RRR_0_OPCODE_X1))); -} - -/* - * Check if nop or fnop at bundle's Y0 pipeline. - */ - -static bool is_bundle_y0_nop(tilegx_bundle_bits bundle) -{ - return (((get_UnaryOpcodeExtension_Y0(bundle) == - NOP_UNARY_OPCODE_Y0) && - (get_RRROpcodeExtension_Y0(bundle) == - UNARY_RRR_1_OPCODE_Y0) && - (get_Opcode_Y0(bundle) == - RRR_1_OPCODE_Y0)) || - ((get_UnaryOpcodeExtension_Y0(bundle) == - FNOP_UNARY_OPCODE_Y0) && - (get_RRROpcodeExtension_Y0(bundle) == - UNARY_RRR_1_OPCODE_Y0) && - (get_Opcode_Y0(bundle) == - RRR_1_OPCODE_Y0))); -} - -/* - * Check if nop or fnop at bundle's pipeline Y1. - */ - -static bool is_bundle_y1_nop(tilegx_bundle_bits bundle) -{ - return (((get_UnaryOpcodeExtension_Y1(bundle) == - NOP_UNARY_OPCODE_Y1) && - (get_RRROpcodeExtension_Y1(bundle) == - UNARY_RRR_1_OPCODE_Y1) && - (get_Opcode_Y1(bundle) == - RRR_1_OPCODE_Y1)) || - ((get_UnaryOpcodeExtension_Y1(bundle) == - FNOP_UNARY_OPCODE_Y1) && - (get_RRROpcodeExtension_Y1(bundle) == - UNARY_RRR_1_OPCODE_Y1) && - (get_Opcode_Y1(bundle) == - RRR_1_OPCODE_Y1))); -} - -/* - * Test if a bundle's y0 and y1 pipelines are both nop or fnop. - */ - -static bool is_y0_y1_nop(tilegx_bundle_bits bundle) -{ - return is_bundle_y0_nop(bundle) && is_bundle_y1_nop(bundle); -} - -/* - * Test if a bundle's x0 and x1 pipelines are both nop or fnop. - */ - -static bool is_x0_x1_nop(tilegx_bundle_bits bundle) -{ - return is_bundle_x0_nop(bundle) && is_bundle_x1_nop(bundle); -} - -/* - * Find the destination, source registers of fault unalign access instruction - * at X1 or Y2. Also, allocate up to 3 scratch registers clob1, clob2 and - * clob3, which are guaranteed different from any register used in the fault - * bundle. r_alias is used to return if the other instructions other than the - * unalign load/store shares same register with ra, rb and rd. - */ - -static void find_regs(tilegx_bundle_bits bundle, uint64_t *rd, uint64_t *ra, - uint64_t *rb, uint64_t *clob1, uint64_t *clob2, - uint64_t *clob3, bool *r_alias) -{ - int i; - uint64_t reg; - uint64_t reg_map = 0, alias_reg_map = 0, map; - bool alias = false; - - /* - * Parse fault bundle, find potential used registers and mark - * corresponding bits in reg_map and alias_map. These 2 bit maps - * are used to find the scratch registers and determine if there - * is register alias. - */ - if (bundle & TILEGX_BUNDLE_MODE_MASK) { /* Y Mode Bundle. */ - - reg = get_SrcA_Y2(bundle); - reg_map |= 1ULL << reg; - *ra = reg; - reg = get_SrcBDest_Y2(bundle); - reg_map |= 1ULL << reg; - - if (rd) { - /* Load. */ - *rd = reg; - alias_reg_map = (1ULL << *rd) | (1ULL << *ra); - } else { - /* Store. */ - *rb = reg; - alias_reg_map = (1ULL << *ra) | (1ULL << *rb); - } - - if (!is_bundle_y1_nop(bundle)) { - reg = get_SrcA_Y1(bundle); - reg_map |= (1ULL << reg); - map = (1ULL << reg); - - reg = get_SrcB_Y1(bundle); - reg_map |= (1ULL << reg); - map |= (1ULL << reg); - - reg = get_Dest_Y1(bundle); - reg_map |= (1ULL << reg); - map |= (1ULL << reg); - - if (map & alias_reg_map) - alias = true; - } - - if (!is_bundle_y0_nop(bundle)) { - reg = get_SrcA_Y0(bundle); - reg_map |= (1ULL << reg); - map = (1ULL << reg); - - reg = get_SrcB_Y0(bundle); - reg_map |= (1ULL << reg); - map |= (1ULL << reg); - - reg = get_Dest_Y0(bundle); - reg_map |= (1ULL << reg); - map |= (1ULL << reg); - - if (map & alias_reg_map) - alias = true; - } - } else { /* X Mode Bundle. */ - - reg = get_SrcA_X1(bundle); - reg_map |= (1ULL << reg); - *ra = reg; - if (rd) { - /* Load. */ - reg = get_Dest_X1(bundle); - reg_map |= (1ULL << reg); - *rd = reg; - alias_reg_map = (1ULL << *rd) | (1ULL << *ra); - } else { - /* Store. */ - reg = get_SrcB_X1(bundle); - reg_map |= (1ULL << reg); - *rb = reg; - alias_reg_map = (1ULL << *ra) | (1ULL << *rb); - } - - if (!is_bundle_x0_nop(bundle)) { - reg = get_SrcA_X0(bundle); - reg_map |= (1ULL << reg); - map = (1ULL << reg); - - reg = get_SrcB_X0(bundle); - reg_map |= (1ULL << reg); - map |= (1ULL << reg); - - reg = get_Dest_X0(bundle); - reg_map |= (1ULL << reg); - map |= (1ULL << reg); - - if (map & alias_reg_map) - alias = true; - } - } - - /* - * "alias" indicates if the unalign access registers have collision - * with others in the same bundle. We jsut simply test all register - * operands case (RRR), ignored the case with immidate. If a bundle - * has no register alias, we may do fixup in a simple or fast manner. - * So if an immidata field happens to hit with a register, we may end - * up fall back to the generic handling. - */ - - *r_alias = alias; - - /* Flip bits on reg_map. */ - reg_map ^= -1ULL; - - /* Scan reg_map lower 54(TREG_SP) bits to find 3 set bits. */ - for (i = 0; i < TREG_SP; i++) { - if (reg_map & (0x1ULL << i)) { - if (*clob1 == -1) { - *clob1 = i; - } else if (*clob2 == -1) { - *clob2 = i; - } else if (*clob3 == -1) { - *clob3 = i; - return; - } - } - } -} - -/* - * Sanity check for register ra, rb, rd, clob1/2/3. Return true if any of them - * is unexpected. - */ - -static bool check_regs(uint64_t rd, uint64_t ra, uint64_t rb, - uint64_t clob1, uint64_t clob2, uint64_t clob3) -{ - bool unexpected = false; - if ((ra >= 56) && (ra != TREG_ZERO)) - unexpected = true; - - if ((clob1 >= 56) || (clob2 >= 56) || (clob3 >= 56)) - unexpected = true; - - if (rd != -1) { - if ((rd >= 56) && (rd != TREG_ZERO)) - unexpected = true; - } else { - if ((rb >= 56) && (rb != TREG_ZERO)) - unexpected = true; - } - return unexpected; -} - - -#define GX_INSN_X0_MASK ((1ULL << 31) - 1) -#define GX_INSN_X1_MASK (((1ULL << 31) - 1) << 31) -#define GX_INSN_Y0_MASK ((0xFULL << 27) | (0xFFFFFULL)) -#define GX_INSN_Y1_MASK (GX_INSN_Y0_MASK << 31) -#define GX_INSN_Y2_MASK ((0x7FULL << 51) | (0x7FULL << 20)) - -#ifdef __LITTLE_ENDIAN -#define GX_INSN_BSWAP(_bundle_) (_bundle_) -#else -#define GX_INSN_BSWAP(_bundle_) swab64(_bundle_) -#endif /* __LITTLE_ENDIAN */ - -/* - * __JIT_CODE(.) creates template bundles in .rodata.unalign_data section. - * The corresponding static function jix_x#_###(.) generates partial or - * whole bundle based on the template and given arguments. - */ - -#define __JIT_CODE(_X_) \ - asm (".pushsection .rodata.unalign_data, \"a\"\n" \ - _X_"\n" \ - ".popsection\n") - -__JIT_CODE("__unalign_jit_x1_mtspr: {mtspr 0, r0}"); -static tilegx_bundle_bits jit_x1_mtspr(int spr, int reg) -{ - extern tilegx_bundle_bits __unalign_jit_x1_mtspr; - return (GX_INSN_BSWAP(__unalign_jit_x1_mtspr) & GX_INSN_X1_MASK) | - create_MT_Imm14_X1(spr) | create_SrcA_X1(reg); -} - -__JIT_CODE("__unalign_jit_x1_mfspr: {mfspr r0, 0}"); -static tilegx_bundle_bits jit_x1_mfspr(int reg, int spr) -{ - extern tilegx_bundle_bits __unalign_jit_x1_mfspr; - return (GX_INSN_BSWAP(__unalign_jit_x1_mfspr) & GX_INSN_X1_MASK) | - create_MF_Imm14_X1(spr) | create_Dest_X1(reg); -} - -__JIT_CODE("__unalign_jit_x0_addi: {addi r0, r0, 0; iret}"); -static tilegx_bundle_bits jit_x0_addi(int rd, int ra, int imm8) -{ - extern tilegx_bundle_bits __unalign_jit_x0_addi; - return (GX_INSN_BSWAP(__unalign_jit_x0_addi) & GX_INSN_X0_MASK) | - create_Dest_X0(rd) | create_SrcA_X0(ra) | - create_Imm8_X0(imm8); -} - -__JIT_CODE("__unalign_jit_x1_ldna: {ldna r0, r0}"); -static tilegx_bundle_bits jit_x1_ldna(int rd, int ra) -{ - extern tilegx_bundle_bits __unalign_jit_x1_ldna; - return (GX_INSN_BSWAP(__unalign_jit_x1_ldna) & GX_INSN_X1_MASK) | - create_Dest_X1(rd) | create_SrcA_X1(ra); -} - -__JIT_CODE("__unalign_jit_x0_dblalign: {dblalign r0, r0 ,r0}"); -static tilegx_bundle_bits jit_x0_dblalign(int rd, int ra, int rb) -{ - extern tilegx_bundle_bits __unalign_jit_x0_dblalign; - return (GX_INSN_BSWAP(__unalign_jit_x0_dblalign) & GX_INSN_X0_MASK) | - create_Dest_X0(rd) | create_SrcA_X0(ra) | - create_SrcB_X0(rb); -} - -__JIT_CODE("__unalign_jit_x1_iret: {iret}"); -static tilegx_bundle_bits jit_x1_iret(void) -{ - extern tilegx_bundle_bits __unalign_jit_x1_iret; - return GX_INSN_BSWAP(__unalign_jit_x1_iret) & GX_INSN_X1_MASK; -} - -__JIT_CODE("__unalign_jit_x01_fnop: {fnop;fnop}"); -static tilegx_bundle_bits jit_x0_fnop(void) -{ - extern tilegx_bundle_bits __unalign_jit_x01_fnop; - return GX_INSN_BSWAP(__unalign_jit_x01_fnop) & GX_INSN_X0_MASK; -} - -static tilegx_bundle_bits jit_x1_fnop(void) -{ - extern tilegx_bundle_bits __unalign_jit_x01_fnop; - return GX_INSN_BSWAP(__unalign_jit_x01_fnop) & GX_INSN_X1_MASK; -} - -__JIT_CODE("__unalign_jit_y2_dummy: {fnop; fnop; ld zero, sp}"); -static tilegx_bundle_bits jit_y2_dummy(void) -{ - extern tilegx_bundle_bits __unalign_jit_y2_dummy; - return GX_INSN_BSWAP(__unalign_jit_y2_dummy) & GX_INSN_Y2_MASK; -} - -static tilegx_bundle_bits jit_y1_fnop(void) -{ - extern tilegx_bundle_bits __unalign_jit_y2_dummy; - return GX_INSN_BSWAP(__unalign_jit_y2_dummy) & GX_INSN_Y1_MASK; -} - -__JIT_CODE("__unalign_jit_x1_st1_add: {st1_add r1, r0, 0}"); -static tilegx_bundle_bits jit_x1_st1_add(int ra, int rb, int imm8) -{ - extern tilegx_bundle_bits __unalign_jit_x1_st1_add; - return (GX_INSN_BSWAP(__unalign_jit_x1_st1_add) & - (~create_SrcA_X1(-1)) & - GX_INSN_X1_MASK) | create_SrcA_X1(ra) | - create_SrcB_X1(rb) | create_Dest_Imm8_X1(imm8); -} - -__JIT_CODE("__unalign_jit_x1_st: {crc32_8 r1, r0, r0; st r0, r0}"); -static tilegx_bundle_bits jit_x1_st(int ra, int rb) -{ - extern tilegx_bundle_bits __unalign_jit_x1_st; - return (GX_INSN_BSWAP(__unalign_jit_x1_st) & GX_INSN_X1_MASK) | - create_SrcA_X1(ra) | create_SrcB_X1(rb); -} - -__JIT_CODE("__unalign_jit_x1_st_add: {st_add r1, r0, 0}"); -static tilegx_bundle_bits jit_x1_st_add(int ra, int rb, int imm8) -{ - extern tilegx_bundle_bits __unalign_jit_x1_st_add; - return (GX_INSN_BSWAP(__unalign_jit_x1_st_add) & - (~create_SrcA_X1(-1)) & - GX_INSN_X1_MASK) | create_SrcA_X1(ra) | - create_SrcB_X1(rb) | create_Dest_Imm8_X1(imm8); -} - -__JIT_CODE("__unalign_jit_x1_ld: {crc32_8 r1, r0, r0; ld r0, r0}"); -static tilegx_bundle_bits jit_x1_ld(int rd, int ra) -{ - extern tilegx_bundle_bits __unalign_jit_x1_ld; - return (GX_INSN_BSWAP(__unalign_jit_x1_ld) & GX_INSN_X1_MASK) | - create_Dest_X1(rd) | create_SrcA_X1(ra); -} - -__JIT_CODE("__unalign_jit_x1_ld_add: {ld_add r1, r0, 0}"); -static tilegx_bundle_bits jit_x1_ld_add(int rd, int ra, int imm8) -{ - extern tilegx_bundle_bits __unalign_jit_x1_ld_add; - return (GX_INSN_BSWAP(__unalign_jit_x1_ld_add) & - (~create_Dest_X1(-1)) & - GX_INSN_X1_MASK) | create_Dest_X1(rd) | - create_SrcA_X1(ra) | create_Imm8_X1(imm8); -} - -__JIT_CODE("__unalign_jit_x0_bfexts: {bfexts r0, r0, 0, 0}"); -static tilegx_bundle_bits jit_x0_bfexts(int rd, int ra, int bfs, int bfe) -{ - extern tilegx_bundle_bits __unalign_jit_x0_bfexts; - return (GX_INSN_BSWAP(__unalign_jit_x0_bfexts) & - GX_INSN_X0_MASK) | - create_Dest_X0(rd) | create_SrcA_X0(ra) | - create_BFStart_X0(bfs) | create_BFEnd_X0(bfe); -} - -__JIT_CODE("__unalign_jit_x0_bfextu: {bfextu r0, r0, 0, 0}"); -static tilegx_bundle_bits jit_x0_bfextu(int rd, int ra, int bfs, int bfe) -{ - extern tilegx_bundle_bits __unalign_jit_x0_bfextu; - return (GX_INSN_BSWAP(__unalign_jit_x0_bfextu) & - GX_INSN_X0_MASK) | - create_Dest_X0(rd) | create_SrcA_X0(ra) | - create_BFStart_X0(bfs) | create_BFEnd_X0(bfe); -} - -__JIT_CODE("__unalign_jit_x1_addi: {bfextu r1, r1, 0, 0; addi r0, r0, 0}"); -static tilegx_bundle_bits jit_x1_addi(int rd, int ra, int imm8) -{ - extern tilegx_bundle_bits __unalign_jit_x1_addi; - return (GX_INSN_BSWAP(__unalign_jit_x1_addi) & GX_INSN_X1_MASK) | - create_Dest_X1(rd) | create_SrcA_X1(ra) | - create_Imm8_X1(imm8); -} - -__JIT_CODE("__unalign_jit_x0_shrui: {shrui r0, r0, 0; iret}"); -static tilegx_bundle_bits jit_x0_shrui(int rd, int ra, int imm6) -{ - extern tilegx_bundle_bits __unalign_jit_x0_shrui; - return (GX_INSN_BSWAP(__unalign_jit_x0_shrui) & - GX_INSN_X0_MASK) | - create_Dest_X0(rd) | create_SrcA_X0(ra) | - create_ShAmt_X0(imm6); -} - -__JIT_CODE("__unalign_jit_x0_rotli: {rotli r0, r0, 0; iret}"); -static tilegx_bundle_bits jit_x0_rotli(int rd, int ra, int imm6) -{ - extern tilegx_bundle_bits __unalign_jit_x0_rotli; - return (GX_INSN_BSWAP(__unalign_jit_x0_rotli) & - GX_INSN_X0_MASK) | - create_Dest_X0(rd) | create_SrcA_X0(ra) | - create_ShAmt_X0(imm6); -} - -__JIT_CODE("__unalign_jit_x1_bnezt: {bnezt r0, __unalign_jit_x1_bnezt}"); -static tilegx_bundle_bits jit_x1_bnezt(int ra, int broff) -{ - extern tilegx_bundle_bits __unalign_jit_x1_bnezt; - return (GX_INSN_BSWAP(__unalign_jit_x1_bnezt) & - GX_INSN_X1_MASK) | - create_SrcA_X1(ra) | create_BrOff_X1(broff); -} - -#undef __JIT_CODE - -/* - * This function generates unalign fixup JIT. - * - * We first find unalign load/store instruction's destination, source - * registers: ra, rb and rd. and 3 scratch registers by calling - * find_regs(...). 3 scratch clobbers should not alias with any register - * used in the fault bundle. Then analyze the fault bundle to determine - * if it's a load or store, operand width, branch or address increment etc. - * At last generated JIT is copied into JIT code area in user space. - */ - -static -void jit_bundle_gen(struct pt_regs *regs, tilegx_bundle_bits bundle, - int align_ctl) -{ - struct thread_info *info = current_thread_info(); - struct unaligned_jit_fragment frag; - struct unaligned_jit_fragment *jit_code_area; - tilegx_bundle_bits bundle_2 = 0; - /* If bundle_2_enable = false, bundle_2 is fnop/nop operation. */ - bool bundle_2_enable = true; - uint64_t ra = -1, rb = -1, rd = -1, clob1 = -1, clob2 = -1, clob3 = -1; - /* - * Indicate if the unalign access - * instruction's registers hit with - * others in the same bundle. - */ - bool alias = false; - bool load_n_store = true; - bool load_store_signed = false; - unsigned int load_store_size = 8; - bool y1_br = false; /* True, for a branch in same bundle at Y1.*/ - int y1_br_reg = 0; - /* True for link operation. i.e. jalr or lnk at Y1 */ - bool y1_lr = false; - int y1_lr_reg = 0; - bool x1_add = false;/* True, for load/store ADD instruction at X1*/ - int x1_add_imm8 = 0; - bool unexpected = false; - int n = 0, k; - - jit_code_area = - (struct unaligned_jit_fragment *)(info->unalign_jit_base); - - memset((void *)&frag, 0, sizeof(frag)); - - /* 0: X mode, Otherwise: Y mode. */ - if (bundle & TILEGX_BUNDLE_MODE_MASK) { - unsigned int mod, opcode; - - if (get_Opcode_Y1(bundle) == RRR_1_OPCODE_Y1 && - get_RRROpcodeExtension_Y1(bundle) == - UNARY_RRR_1_OPCODE_Y1) { - - opcode = get_UnaryOpcodeExtension_Y1(bundle); - - /* - * Test "jalr", "jalrp", "jr", "jrp" instruction at Y1 - * pipeline. - */ - switch (opcode) { - case JALR_UNARY_OPCODE_Y1: - case JALRP_UNARY_OPCODE_Y1: - y1_lr = true; - y1_lr_reg = 55; /* Link register. */ - /* FALLTHROUGH */ - case JR_UNARY_OPCODE_Y1: - case JRP_UNARY_OPCODE_Y1: - y1_br = true; - y1_br_reg = get_SrcA_Y1(bundle); - break; - case LNK_UNARY_OPCODE_Y1: - /* "lnk" at Y1 pipeline. */ - y1_lr = true; - y1_lr_reg = get_Dest_Y1(bundle); - break; - } - } - - opcode = get_Opcode_Y2(bundle); - mod = get_Mode(bundle); - - /* - * bundle_2 is bundle after making Y2 as a dummy operation - * - ld zero, sp - */ - bundle_2 = (bundle & (~GX_INSN_Y2_MASK)) | jit_y2_dummy(); - - /* Make Y1 as fnop if Y1 is a branch or lnk operation. */ - if (y1_br || y1_lr) { - bundle_2 &= ~(GX_INSN_Y1_MASK); - bundle_2 |= jit_y1_fnop(); - } - - if (is_y0_y1_nop(bundle_2)) - bundle_2_enable = false; - - if (mod == MODE_OPCODE_YC2) { - /* Store. */ - load_n_store = false; - load_store_size = 1 << opcode; - load_store_signed = false; - find_regs(bundle, 0, &ra, &rb, &clob1, &clob2, - &clob3, &alias); - if (load_store_size > 8) - unexpected = true; - } else { - /* Load. */ - load_n_store = true; - if (mod == MODE_OPCODE_YB2) { - switch (opcode) { - case LD_OPCODE_Y2: - load_store_signed = false; - load_store_size = 8; - break; - case LD4S_OPCODE_Y2: - load_store_signed = true; - load_store_size = 4; - break; - case LD4U_OPCODE_Y2: - load_store_signed = false; - load_store_size = 4; - break; - default: - unexpected = true; - } - } else if (mod == MODE_OPCODE_YA2) { - if (opcode == LD2S_OPCODE_Y2) { - load_store_signed = true; - load_store_size = 2; - } else if (opcode == LD2U_OPCODE_Y2) { - load_store_signed = false; - load_store_size = 2; - } else - unexpected = true; - } else - unexpected = true; - find_regs(bundle, &rd, &ra, &rb, &clob1, &clob2, - &clob3, &alias); - } - } else { - unsigned int opcode; - - /* bundle_2 is bundle after making X1 as "fnop". */ - bundle_2 = (bundle & (~GX_INSN_X1_MASK)) | jit_x1_fnop(); - - if (is_x0_x1_nop(bundle_2)) - bundle_2_enable = false; - - if (get_Opcode_X1(bundle) == RRR_0_OPCODE_X1) { - opcode = get_UnaryOpcodeExtension_X1(bundle); - - if (get_RRROpcodeExtension_X1(bundle) == - UNARY_RRR_0_OPCODE_X1) { - load_n_store = true; - find_regs(bundle, &rd, &ra, &rb, &clob1, - &clob2, &clob3, &alias); - - switch (opcode) { - case LD_UNARY_OPCODE_X1: - load_store_signed = false; - load_store_size = 8; - break; - case LD4S_UNARY_OPCODE_X1: - load_store_signed = true; - /* FALLTHROUGH */ - case LD4U_UNARY_OPCODE_X1: - load_store_size = 4; - break; - - case LD2S_UNARY_OPCODE_X1: - load_store_signed = true; - /* FALLTHROUGH */ - case LD2U_UNARY_OPCODE_X1: - load_store_size = 2; - break; - default: - unexpected = true; - } - } else { - load_n_store = false; - load_store_signed = false; - find_regs(bundle, 0, &ra, &rb, - &clob1, &clob2, &clob3, - &alias); - - opcode = get_RRROpcodeExtension_X1(bundle); - switch (opcode) { - case ST_RRR_0_OPCODE_X1: - load_store_size = 8; - break; - case ST4_RRR_0_OPCODE_X1: - load_store_size = 4; - break; - case ST2_RRR_0_OPCODE_X1: - load_store_size = 2; - break; - default: - unexpected = true; - } - } - } else if (get_Opcode_X1(bundle) == IMM8_OPCODE_X1) { - load_n_store = true; - opcode = get_Imm8OpcodeExtension_X1(bundle); - switch (opcode) { - case LD_ADD_IMM8_OPCODE_X1: - load_store_size = 8; - break; - - case LD4S_ADD_IMM8_OPCODE_X1: - load_store_signed = true; - /* FALLTHROUGH */ - case LD4U_ADD_IMM8_OPCODE_X1: - load_store_size = 4; - break; - - case LD2S_ADD_IMM8_OPCODE_X1: - load_store_signed = true; - /* FALLTHROUGH */ - case LD2U_ADD_IMM8_OPCODE_X1: - load_store_size = 2; - break; - - case ST_ADD_IMM8_OPCODE_X1: - load_n_store = false; - load_store_size = 8; - break; - case ST4_ADD_IMM8_OPCODE_X1: - load_n_store = false; - load_store_size = 4; - break; - case ST2_ADD_IMM8_OPCODE_X1: - load_n_store = false; - load_store_size = 2; - break; - default: - unexpected = true; - } - - if (!unexpected) { - x1_add = true; - if (load_n_store) - x1_add_imm8 = get_Imm8_X1(bundle); - else - x1_add_imm8 = get_Dest_Imm8_X1(bundle); - } - - find_regs(bundle, load_n_store ? (&rd) : NULL, - &ra, &rb, &clob1, &clob2, &clob3, &alias); - } else - unexpected = true; - } - - /* - * Some sanity check for register numbers extracted from fault bundle. - */ - if (check_regs(rd, ra, rb, clob1, clob2, clob3) == true) - unexpected = true; - - /* Give warning if register ra has an aligned address. */ - if (!unexpected) - WARN_ON(!((load_store_size - 1) & (regs->regs[ra]))); - - - /* - * Fault came from kernel space, here we only need take care of - * unaligned "get_user/put_user" macros defined in "uaccess.h". - * Basically, we will handle bundle like this: - * {ld/2u/4s rd, ra; movei rx, 0} or {st/2/4 ra, rb; movei rx, 0} - * (Refer to file "arch/tile/include/asm/uaccess.h" for details). - * For either load or store, byte-wise operation is performed by calling - * get_user() or put_user(). If the macro returns non-zero value, - * set the value to rx, otherwise set zero to rx. Finally make pc point - * to next bundle and return. - */ - - if (EX1_PL(regs->ex1) != USER_PL) { - - unsigned long rx = 0; - unsigned long x = 0, ret = 0; - - if (y1_br || y1_lr || x1_add || - (load_store_signed != - (load_n_store && load_store_size == 4))) { - /* No branch, link, wrong sign-ext or load/store add. */ - unexpected = true; - } else if (!unexpected) { - if (bundle & TILEGX_BUNDLE_MODE_MASK) { - /* - * Fault bundle is Y mode. - * Check if the Y1 and Y0 is the form of - * { movei rx, 0; nop/fnop }, if yes, - * find the rx. - */ - - if ((get_Opcode_Y1(bundle) == ADDI_OPCODE_Y1) - && (get_SrcA_Y1(bundle) == TREG_ZERO) && - (get_Imm8_Y1(bundle) == 0) && - is_bundle_y0_nop(bundle)) { - rx = get_Dest_Y1(bundle); - } else if ((get_Opcode_Y0(bundle) == - ADDI_OPCODE_Y0) && - (get_SrcA_Y0(bundle) == TREG_ZERO) && - (get_Imm8_Y0(bundle) == 0) && - is_bundle_y1_nop(bundle)) { - rx = get_Dest_Y0(bundle); - } else { - unexpected = true; - } - } else { - /* - * Fault bundle is X mode. - * Check if the X0 is 'movei rx, 0', - * if yes, find the rx. - */ - - if ((get_Opcode_X0(bundle) == IMM8_OPCODE_X0) - && (get_Imm8OpcodeExtension_X0(bundle) == - ADDI_IMM8_OPCODE_X0) && - (get_SrcA_X0(bundle) == TREG_ZERO) && - (get_Imm8_X0(bundle) == 0)) { - rx = get_Dest_X0(bundle); - } else { - unexpected = true; - } - } - - /* rx should be less than 56. */ - if (!unexpected && (rx >= 56)) - unexpected = true; - } - - if (!search_exception_tables(regs->pc)) { - /* No fixup in the exception tables for the pc. */ - unexpected = true; - } - - if (unexpected) { - /* Unexpected unalign kernel fault. */ - struct task_struct *tsk = validate_current(); - - bust_spinlocks(1); - - show_regs(regs); - - if (unlikely(tsk->pid < 2)) { - panic("Kernel unalign fault running %s!", - tsk->pid ? "init" : "the idle task"); - } -#ifdef SUPPORT_DIE - die("Oops", regs); -#endif - bust_spinlocks(1); - - do_group_exit(SIGKILL); - - } else { - unsigned long i, b = 0; - unsigned char *ptr = - (unsigned char *)regs->regs[ra]; - if (load_n_store) { - /* handle get_user(x, ptr) */ - for (i = 0; i < load_store_size; i++) { - ret = get_user(b, ptr++); - if (!ret) { - /* Success! update x. */ -#ifdef __LITTLE_ENDIAN - x |= (b << (8 * i)); -#else - x <<= 8; - x |= b; -#endif /* __LITTLE_ENDIAN */ - } else { - x = 0; - break; - } - } - - /* Sign-extend 4-byte loads. */ - if (load_store_size == 4) - x = (long)(int)x; - - /* Set register rd. */ - regs->regs[rd] = x; - - /* Set register rx. */ - regs->regs[rx] = ret; - - /* Bump pc. */ - regs->pc += 8; - - } else { - /* Handle put_user(x, ptr) */ - x = regs->regs[rb]; -#ifdef __LITTLE_ENDIAN - b = x; -#else - /* - * Swap x in order to store x from low - * to high memory same as the - * little-endian case. - */ - switch (load_store_size) { - case 8: - b = swab64(x); - break; - case 4: - b = swab32(x); - break; - case 2: - b = swab16(x); - break; - } -#endif /* __LITTLE_ENDIAN */ - for (i = 0; i < load_store_size; i++) { - ret = put_user(b, ptr++); - if (ret) - break; - /* Success! shift 1 byte. */ - b >>= 8; - } - /* Set register rx. */ - regs->regs[rx] = ret; - - /* Bump pc. */ - regs->pc += 8; - } - } - - unaligned_fixup_count++; - - if (unaligned_printk) { - pr_info("%s/%d - Unalign fixup for kernel access to userspace %lx\n", - current->comm, current->pid, regs->regs[ra]); - } - - /* Done! Return to the exception handler. */ - return; - } - - if ((align_ctl == 0) || unexpected) { - siginfo_t info; - - clear_siginfo(&info); - info.si_signo = SIGBUS; - info.si_code = BUS_ADRALN; - info.si_addr = (unsigned char __user *)0; - - if (unaligned_printk) - pr_info("Unalign bundle: unexp @%llx, %llx\n", - (unsigned long long)regs->pc, - (unsigned long long)bundle); - - if (ra < 56) { - unsigned long uaa = (unsigned long)regs->regs[ra]; - /* Set bus Address. */ - info.si_addr = (unsigned char __user *)uaa; - } - - unaligned_fixup_count++; - - trace_unhandled_signal("unaligned fixup trap", regs, - (unsigned long)info.si_addr, SIGBUS); - force_sig_info(info.si_signo, &info, current); - return; - } - -#ifdef __LITTLE_ENDIAN -#define UA_FIXUP_ADDR_DELTA 1 -#define UA_FIXUP_BFEXT_START(_B_) 0 -#define UA_FIXUP_BFEXT_END(_B_) (8 * (_B_) - 1) -#else /* __BIG_ENDIAN */ -#define UA_FIXUP_ADDR_DELTA -1 -#define UA_FIXUP_BFEXT_START(_B_) (64 - 8 * (_B_)) -#define UA_FIXUP_BFEXT_END(_B_) 63 -#endif /* __LITTLE_ENDIAN */ - - - - if ((ra != rb) && (rd != TREG_SP) && !alias && - !y1_br && !y1_lr && !x1_add) { - /* - * Simple case: ra != rb and no register alias found, - * and no branch or link. This will be the majority. - * We can do a little better for simplae case than the - * generic scheme below. - */ - if (!load_n_store) { - /* - * Simple store: ra != rb, no need for scratch register. - * Just store and rotate to right bytewise. - */ -#ifdef __BIG_ENDIAN - frag.insn[n++] = - jit_x0_addi(ra, ra, load_store_size - 1) | - jit_x1_fnop(); -#endif /* __BIG_ENDIAN */ - for (k = 0; k < load_store_size; k++) { - /* Store a byte. */ - frag.insn[n++] = - jit_x0_rotli(rb, rb, 56) | - jit_x1_st1_add(ra, rb, - UA_FIXUP_ADDR_DELTA); - } -#ifdef __BIG_ENDIAN - frag.insn[n] = jit_x1_addi(ra, ra, 1); -#else - frag.insn[n] = jit_x1_addi(ra, ra, - -1 * load_store_size); -#endif /* __LITTLE_ENDIAN */ - - if (load_store_size == 8) { - frag.insn[n] |= jit_x0_fnop(); - } else if (load_store_size == 4) { - frag.insn[n] |= jit_x0_rotli(rb, rb, 32); - } else { /* = 2 */ - frag.insn[n] |= jit_x0_rotli(rb, rb, 16); - } - n++; - if (bundle_2_enable) - frag.insn[n++] = bundle_2; - frag.insn[n++] = jit_x0_fnop() | jit_x1_iret(); - } else { - if (rd == ra) { - /* Use two clobber registers: clob1/2. */ - frag.insn[n++] = - jit_x0_addi(TREG_SP, TREG_SP, -16) | - jit_x1_fnop(); - frag.insn[n++] = - jit_x0_addi(clob1, ra, 7) | - jit_x1_st_add(TREG_SP, clob1, -8); - frag.insn[n++] = - jit_x0_addi(clob2, ra, 0) | - jit_x1_st(TREG_SP, clob2); - frag.insn[n++] = - jit_x0_fnop() | - jit_x1_ldna(rd, ra); - frag.insn[n++] = - jit_x0_fnop() | - jit_x1_ldna(clob1, clob1); - /* - * Note: we must make sure that rd must not - * be sp. Recover clob1/2 from stack. - */ - frag.insn[n++] = - jit_x0_dblalign(rd, clob1, clob2) | - jit_x1_ld_add(clob2, TREG_SP, 8); - frag.insn[n++] = - jit_x0_fnop() | - jit_x1_ld_add(clob1, TREG_SP, 16); - } else { - /* Use one clobber register: clob1 only. */ - frag.insn[n++] = - jit_x0_addi(TREG_SP, TREG_SP, -16) | - jit_x1_fnop(); - frag.insn[n++] = - jit_x0_addi(clob1, ra, 7) | - jit_x1_st(TREG_SP, clob1); - frag.insn[n++] = - jit_x0_fnop() | - jit_x1_ldna(rd, ra); - frag.insn[n++] = - jit_x0_fnop() | - jit_x1_ldna(clob1, clob1); - /* - * Note: we must make sure that rd must not - * be sp. Recover clob1 from stack. - */ - frag.insn[n++] = - jit_x0_dblalign(rd, clob1, ra) | - jit_x1_ld_add(clob1, TREG_SP, 16); - } - - if (bundle_2_enable) - frag.insn[n++] = bundle_2; - /* - * For non 8-byte load, extract corresponding bytes and - * signed extension. - */ - if (load_store_size == 4) { - if (load_store_signed) - frag.insn[n++] = - jit_x0_bfexts( - rd, rd, - UA_FIXUP_BFEXT_START(4), - UA_FIXUP_BFEXT_END(4)) | - jit_x1_fnop(); - else - frag.insn[n++] = - jit_x0_bfextu( - rd, rd, - UA_FIXUP_BFEXT_START(4), - UA_FIXUP_BFEXT_END(4)) | - jit_x1_fnop(); - } else if (load_store_size == 2) { - if (load_store_signed) - frag.insn[n++] = - jit_x0_bfexts( - rd, rd, - UA_FIXUP_BFEXT_START(2), - UA_FIXUP_BFEXT_END(2)) | - jit_x1_fnop(); - else - frag.insn[n++] = - jit_x0_bfextu( - rd, rd, - UA_FIXUP_BFEXT_START(2), - UA_FIXUP_BFEXT_END(2)) | - jit_x1_fnop(); - } - - frag.insn[n++] = - jit_x0_fnop() | - jit_x1_iret(); - } - } else if (!load_n_store) { - - /* - * Generic memory store cases: use 3 clobber registers. - * - * Alloc space for saveing clob2,1,3 on user's stack. - * register clob3 points to where clob2 saved, followed by - * clob1 and 3 from high to low memory. - */ - frag.insn[n++] = - jit_x0_addi(TREG_SP, TREG_SP, -32) | - jit_x1_fnop(); - frag.insn[n++] = - jit_x0_addi(clob3, TREG_SP, 16) | - jit_x1_st_add(TREG_SP, clob3, 8); -#ifdef __LITTLE_ENDIAN - frag.insn[n++] = - jit_x0_addi(clob1, ra, 0) | - jit_x1_st_add(TREG_SP, clob1, 8); -#else - frag.insn[n++] = - jit_x0_addi(clob1, ra, load_store_size - 1) | - jit_x1_st_add(TREG_SP, clob1, 8); -#endif - if (load_store_size == 8) { - /* - * We save one byte a time, not for fast, but compact - * code. After each store, data source register shift - * right one byte. unchanged after 8 stores. - */ - frag.insn[n++] = - jit_x0_addi(clob2, TREG_ZERO, 7) | - jit_x1_st_add(TREG_SP, clob2, 16); - frag.insn[n++] = - jit_x0_rotli(rb, rb, 56) | - jit_x1_st1_add(clob1, rb, UA_FIXUP_ADDR_DELTA); - frag.insn[n++] = - jit_x0_addi(clob2, clob2, -1) | - jit_x1_bnezt(clob2, -1); - frag.insn[n++] = - jit_x0_fnop() | - jit_x1_addi(clob2, y1_br_reg, 0); - } else if (load_store_size == 4) { - frag.insn[n++] = - jit_x0_addi(clob2, TREG_ZERO, 3) | - jit_x1_st_add(TREG_SP, clob2, 16); - frag.insn[n++] = - jit_x0_rotli(rb, rb, 56) | - jit_x1_st1_add(clob1, rb, UA_FIXUP_ADDR_DELTA); - frag.insn[n++] = - jit_x0_addi(clob2, clob2, -1) | - jit_x1_bnezt(clob2, -1); - /* - * same as 8-byte case, but need shift another 4 - * byte to recover rb for 4-byte store. - */ - frag.insn[n++] = jit_x0_rotli(rb, rb, 32) | - jit_x1_addi(clob2, y1_br_reg, 0); - } else { /* =2 */ - frag.insn[n++] = - jit_x0_addi(clob2, rb, 0) | - jit_x1_st_add(TREG_SP, clob2, 16); - for (k = 0; k < 2; k++) { - frag.insn[n++] = - jit_x0_shrui(rb, rb, 8) | - jit_x1_st1_add(clob1, rb, - UA_FIXUP_ADDR_DELTA); - } - frag.insn[n++] = - jit_x0_addi(rb, clob2, 0) | - jit_x1_addi(clob2, y1_br_reg, 0); - } - - if (bundle_2_enable) - frag.insn[n++] = bundle_2; - - if (y1_lr) { - frag.insn[n++] = - jit_x0_fnop() | - jit_x1_mfspr(y1_lr_reg, - SPR_EX_CONTEXT_0_0); - } - if (y1_br) { - frag.insn[n++] = - jit_x0_fnop() | - jit_x1_mtspr(SPR_EX_CONTEXT_0_0, - clob2); - } - if (x1_add) { - frag.insn[n++] = - jit_x0_addi(ra, ra, x1_add_imm8) | - jit_x1_ld_add(clob2, clob3, -8); - } else { - frag.insn[n++] = - jit_x0_fnop() | - jit_x1_ld_add(clob2, clob3, -8); - } - frag.insn[n++] = - jit_x0_fnop() | - jit_x1_ld_add(clob1, clob3, -8); - frag.insn[n++] = jit_x0_fnop() | jit_x1_ld(clob3, clob3); - frag.insn[n++] = jit_x0_fnop() | jit_x1_iret(); - - } else { - /* - * Generic memory load cases. - * - * Alloc space for saveing clob1,2,3 on user's stack. - * register clob3 points to where clob1 saved, followed - * by clob2 and 3 from high to low memory. - */ - - frag.insn[n++] = - jit_x0_addi(TREG_SP, TREG_SP, -32) | - jit_x1_fnop(); - frag.insn[n++] = - jit_x0_addi(clob3, TREG_SP, 16) | - jit_x1_st_add(TREG_SP, clob3, 8); - frag.insn[n++] = - jit_x0_addi(clob2, ra, 0) | - jit_x1_st_add(TREG_SP, clob2, 8); - - if (y1_br) { - frag.insn[n++] = - jit_x0_addi(clob1, y1_br_reg, 0) | - jit_x1_st_add(TREG_SP, clob1, 16); - } else { - frag.insn[n++] = - jit_x0_fnop() | - jit_x1_st_add(TREG_SP, clob1, 16); - } - - if (bundle_2_enable) - frag.insn[n++] = bundle_2; - - if (y1_lr) { - frag.insn[n++] = - jit_x0_fnop() | - jit_x1_mfspr(y1_lr_reg, - SPR_EX_CONTEXT_0_0); - } - - if (y1_br) { - frag.insn[n++] = - jit_x0_fnop() | - jit_x1_mtspr(SPR_EX_CONTEXT_0_0, - clob1); - } - - frag.insn[n++] = - jit_x0_addi(clob1, clob2, 7) | - jit_x1_ldna(rd, clob2); - frag.insn[n++] = - jit_x0_fnop() | - jit_x1_ldna(clob1, clob1); - frag.insn[n++] = - jit_x0_dblalign(rd, clob1, clob2) | - jit_x1_ld_add(clob1, clob3, -8); - if (x1_add) { - frag.insn[n++] = - jit_x0_addi(ra, ra, x1_add_imm8) | - jit_x1_ld_add(clob2, clob3, -8); - } else { - frag.insn[n++] = - jit_x0_fnop() | - jit_x1_ld_add(clob2, clob3, -8); - } - - frag.insn[n++] = - jit_x0_fnop() | - jit_x1_ld(clob3, clob3); - - if (load_store_size == 4) { - if (load_store_signed) - frag.insn[n++] = - jit_x0_bfexts( - rd, rd, - UA_FIXUP_BFEXT_START(4), - UA_FIXUP_BFEXT_END(4)) | - jit_x1_fnop(); - else - frag.insn[n++] = - jit_x0_bfextu( - rd, rd, - UA_FIXUP_BFEXT_START(4), - UA_FIXUP_BFEXT_END(4)) | - jit_x1_fnop(); - } else if (load_store_size == 2) { - if (load_store_signed) - frag.insn[n++] = - jit_x0_bfexts( - rd, rd, - UA_FIXUP_BFEXT_START(2), - UA_FIXUP_BFEXT_END(2)) | - jit_x1_fnop(); - else - frag.insn[n++] = - jit_x0_bfextu( - rd, rd, - UA_FIXUP_BFEXT_START(2), - UA_FIXUP_BFEXT_END(2)) | - jit_x1_fnop(); - } - - frag.insn[n++] = jit_x0_fnop() | jit_x1_iret(); - } - - /* Max JIT bundle count is 14. */ - WARN_ON(n > 14); - - if (!unexpected) { - int status = 0; - int idx = (regs->pc >> 3) & - ((1ULL << (PAGE_SHIFT - UNALIGN_JIT_SHIFT)) - 1); - - frag.pc = regs->pc; - frag.bundle = bundle; - - if (unaligned_printk) { - pr_info("%s/%d, Unalign fixup: pc=%lx bundle=%lx %d %d %d %d %d %d %d %d\n", - current->comm, current->pid, - (unsigned long)frag.pc, - (unsigned long)frag.bundle, - (int)alias, (int)rd, (int)ra, - (int)rb, (int)bundle_2_enable, - (int)y1_lr, (int)y1_br, (int)x1_add); - - for (k = 0; k < n; k += 2) - pr_info("[%d] %016llx %016llx\n", - k, (unsigned long long)frag.insn[k], - (unsigned long long)frag.insn[k+1]); - } - - /* Swap bundle byte order for big endian sys. */ -#ifdef __BIG_ENDIAN - frag.bundle = GX_INSN_BSWAP(frag.bundle); - for (k = 0; k < n; k++) - frag.insn[k] = GX_INSN_BSWAP(frag.insn[k]); -#endif /* __BIG_ENDIAN */ - - status = copy_to_user((void __user *)&jit_code_area[idx], - &frag, sizeof(frag)); - if (status) { - /* Fail to copy JIT into user land. send SIGSEGV. */ - siginfo_t info; - - clear_siginfo(&info); - info.si_signo = SIGSEGV; - info.si_code = SEGV_MAPERR; - info.si_addr = (void __user *)&jit_code_area[idx]; - - pr_warn("Unalign fixup: pid=%d %s jit_code_area=%llx\n", - current->pid, current->comm, - (unsigned long long)&jit_code_area[idx]); - - trace_unhandled_signal("segfault in unalign fixup", - regs, - (unsigned long)info.si_addr, - SIGSEGV); - force_sig_info(info.si_signo, &info, current); - return; - } - - - /* Do a cheaper increment, not accurate. */ - unaligned_fixup_count++; - __flush_icache_range((unsigned long)&jit_code_area[idx], - (unsigned long)&jit_code_area[idx] + - sizeof(frag)); - - /* Setup SPR_EX_CONTEXT_0_0/1 for returning to user program.*/ - __insn_mtspr(SPR_EX_CONTEXT_0_0, regs->pc + 8); - __insn_mtspr(SPR_EX_CONTEXT_0_1, PL_ICS_EX1(USER_PL, 0)); - - /* Modify pc at the start of new JIT. */ - regs->pc = (unsigned long)&jit_code_area[idx].insn[0]; - /* Set ICS in SPR_EX_CONTEXT_K_1. */ - regs->ex1 = PL_ICS_EX1(USER_PL, 1); - } -} - - -/* - * C function to generate unalign data JIT. Called from unalign data - * interrupt handler. - * - * First check if unalign fix is disabled or exception did not not come from - * user space or sp register points to unalign address, if true, generate a - * SIGBUS. Then map a page into user space as JIT area if it is not mapped - * yet. Genenerate JIT code by calling jit_bundle_gen(). After that return - * back to exception handler. - * - * The exception handler will "iret" to new generated JIT code after - * restoring caller saved registers. In theory, the JIT code will perform - * another "iret" to resume user's program. - */ - -void do_unaligned(struct pt_regs *regs, int vecnum) -{ - tilegx_bundle_bits __user *pc; - tilegx_bundle_bits bundle; - struct thread_info *info = current_thread_info(); - int align_ctl; - - /* Checks the per-process unaligned JIT flags */ - align_ctl = unaligned_fixup; - switch (task_thread_info(current)->align_ctl) { - case PR_UNALIGN_NOPRINT: - align_ctl = 1; - break; - case PR_UNALIGN_SIGBUS: - align_ctl = 0; - break; - } - - /* Enable iterrupt in order to access user land. */ - local_irq_enable(); - - /* - * The fault came from kernel space. Two choices: - * (a) unaligned_fixup < 1, we will first call get/put_user fixup - * to return -EFAULT. If no fixup, simply panic the kernel. - * (b) unaligned_fixup >=1, we will try to fix the unaligned access - * if it was triggered by get_user/put_user() macros. Panic the - * kernel if it is not fixable. - */ - - if (EX1_PL(regs->ex1) != USER_PL) { - - if (align_ctl < 1) { - unaligned_fixup_count++; - /* If exception came from kernel, try fix it up. */ - if (fixup_exception(regs)) { - if (unaligned_printk) - pr_info("Unalign fixup: %d %llx @%llx\n", - (int)unaligned_fixup, - (unsigned long long)regs->ex1, - (unsigned long long)regs->pc); - } else { - /* Not fixable. Go panic. */ - panic("Unalign exception in Kernel. pc=%lx", - regs->pc); - } - } else { - /* - * Try to fix the exception. If we can't, panic the - * kernel. - */ - bundle = GX_INSN_BSWAP( - *((tilegx_bundle_bits *)(regs->pc))); - jit_bundle_gen(regs, bundle, align_ctl); - } - return; - } - - /* - * Fault came from user with ICS or stack is not aligned. - * If so, we will trigger SIGBUS. - */ - if ((regs->sp & 0x7) || (regs->ex1) || (align_ctl < 0)) { - siginfo_t info; - - clear_siginfo(&info); - info.si_signo = SIGBUS; - info.si_code = BUS_ADRALN; - info.si_addr = (unsigned char __user *)0; - - if (unaligned_printk) - pr_info("Unalign fixup: %d %llx @%llx\n", - (int)unaligned_fixup, - (unsigned long long)regs->ex1, - (unsigned long long)regs->pc); - - unaligned_fixup_count++; - - trace_unhandled_signal("unaligned fixup trap", regs, 0, SIGBUS); - force_sig_info(info.si_signo, &info, current); - return; - } - - - /* Read the bundle caused the exception! */ - pc = (tilegx_bundle_bits __user *)(regs->pc); - if (get_user(bundle, pc) != 0) { - /* Probably never be here since pc is valid user address.*/ - siginfo_t info; - - clear_siginfo(&info); - info.si_signo = SIGSEGV; - info.si_code = SEGV_MAPERR; - info.si_addr = (void __user *)pc; - - pr_err("Couldn't read instruction at %p trying to step\n", pc); - trace_unhandled_signal("segfault in unalign fixup", regs, - (unsigned long)info.si_addr, SIGSEGV); - force_sig_info(info.si_signo, &info, current); - return; - } - - if (!info->unalign_jit_base) { - void __user *user_page; - - /* - * Allocate a page in userland. - * For 64-bit processes we try to place the mapping far - * from anything else that might be going on (specifically - * 64 GB below the top of the user address space). If it - * happens not to be possible to put it there, it's OK; - * the kernel will choose another location and we'll - * remember it for later. - */ - if (is_compat_task()) - user_page = NULL; - else - user_page = (void __user *)(TASK_SIZE - (1UL << 36)) + - (current->pid << PAGE_SHIFT); - - user_page = (void __user *) vm_mmap(NULL, - (unsigned long)user_page, - PAGE_SIZE, - PROT_EXEC | PROT_READ | - PROT_WRITE, -#ifdef CONFIG_HOMECACHE - MAP_CACHE_HOME_TASK | -#endif - MAP_PRIVATE | - MAP_ANONYMOUS, - 0); - - if (IS_ERR((void __force *)user_page)) { - pr_err("Out of kernel pages trying do_mmap\n"); - return; - } - - /* Save the address in the thread_info struct */ - info->unalign_jit_base = user_page; - if (unaligned_printk) - pr_info("Unalign bundle: %d:%d, allocate page @%llx\n", - raw_smp_processor_id(), current->pid, - (unsigned long long)user_page); - } - - /* Generate unalign JIT */ - jit_bundle_gen(regs, GX_INSN_BSWAP(bundle), align_ctl); -} - -#endif /* __tilegx__ */ diff --git a/arch/tile/kernel/usb.c b/arch/tile/kernel/usb.c deleted file mode 100644 index 9f1e05e12255..000000000000 --- a/arch/tile/kernel/usb.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Register the Tile-Gx USB interfaces as platform devices. - * - * The actual USB driver is just some glue (in - * drivers/usb/host/[eo]hci-tilegx.c) which makes the registers available - * to the standard kernel EHCI and OHCI drivers. - */ - -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/usb/tilegx.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> - -static u64 ehci_dmamask = DMA_BIT_MASK(32); - -#define USB_HOST_DEF(unit, type, dmamask) \ - static struct \ - tilegx_usb_platform_data tilegx_usb_platform_data_ ## type ## \ - hci ## unit = { \ - .dev_index = unit, \ - }; \ - \ - static struct platform_device tilegx_usb_ ## type ## hci ## unit = { \ - .name = "tilegx-" #type "hci", \ - .id = unit, \ - .dev = { \ - .dma_mask = dmamask, \ - .coherent_dma_mask = DMA_BIT_MASK(32), \ - .platform_data = \ - &tilegx_usb_platform_data_ ## type ## hci ## \ - unit, \ - }, \ - }; - -USB_HOST_DEF(0, e, &ehci_dmamask) -USB_HOST_DEF(0, o, NULL) -USB_HOST_DEF(1, e, &ehci_dmamask) -USB_HOST_DEF(1, o, NULL) - -#undef USB_HOST_DEF - -static struct platform_device *tilegx_usb_devices[] __initdata = { - &tilegx_usb_ehci0, - &tilegx_usb_ehci1, - &tilegx_usb_ohci0, - &tilegx_usb_ohci1, -}; - -/** Add our set of possible USB devices. */ -static int __init tilegx_usb_init(void) -{ - platform_add_devices(tilegx_usb_devices, - ARRAY_SIZE(tilegx_usb_devices)); - - return 0; -} -arch_initcall(tilegx_usb_init); diff --git a/arch/tile/kernel/vdso.c b/arch/tile/kernel/vdso.c deleted file mode 100644 index 5bc51d7dfdcb..000000000000 --- a/arch/tile/kernel/vdso.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/binfmts.h> -#include <linux/compat.h> -#include <linux/elf.h> -#include <linux/mm.h> -#include <linux/pagemap.h> - -#include <asm/vdso.h> -#include <asm/mman.h> -#include <asm/sections.h> - -#include <arch/sim.h> - -/* The alignment of the vDSO. */ -#define VDSO_ALIGNMENT PAGE_SIZE - - -static unsigned int vdso_pages; -static struct page **vdso_pagelist; - -#ifdef CONFIG_COMPAT -static unsigned int vdso32_pages; -static struct page **vdso32_pagelist; -#endif -static int vdso_ready; - -/* - * The vdso data page. - */ -static union { - struct vdso_data data; - u8 page[PAGE_SIZE]; -} vdso_data_store __page_aligned_data; - -struct vdso_data *vdso_data = &vdso_data_store.data; - -static unsigned int __read_mostly vdso_enabled = 1; - -static struct page **vdso_setup(void *vdso_kbase, unsigned int pages) -{ - int i; - struct page **pagelist; - - pagelist = kzalloc(sizeof(struct page *) * (pages + 1), GFP_KERNEL); - BUG_ON(pagelist == NULL); - for (i = 0; i < pages - 1; i++) { - struct page *pg = virt_to_page(vdso_kbase + i*PAGE_SIZE); - ClearPageReserved(pg); - pagelist[i] = pg; - } - pagelist[pages - 1] = virt_to_page(vdso_data); - pagelist[pages] = NULL; - - return pagelist; -} - -static int __init vdso_init(void) -{ - int data_pages = sizeof(vdso_data_store) >> PAGE_SHIFT; - - /* - * We can disable vDSO support generally, but we need to retain - * one page to support the two-bundle (16-byte) rt_sigreturn path. - */ - if (!vdso_enabled) { - size_t offset = (unsigned long)&__vdso_rt_sigreturn; - static struct page *sigret_page; - sigret_page = alloc_page(GFP_KERNEL | __GFP_ZERO); - BUG_ON(sigret_page == NULL); - vdso_pagelist = &sigret_page; - vdso_pages = 1; - BUG_ON(offset >= PAGE_SIZE); - memcpy(page_address(sigret_page) + offset, - vdso_start + offset, 16); -#ifdef CONFIG_COMPAT - vdso32_pages = vdso_pages; - vdso32_pagelist = vdso_pagelist; -#endif - vdso_ready = 1; - return 0; - } - - vdso_pages = (vdso_end - vdso_start) >> PAGE_SHIFT; - vdso_pages += data_pages; - vdso_pagelist = vdso_setup(vdso_start, vdso_pages); - -#ifdef CONFIG_COMPAT - vdso32_pages = (vdso32_end - vdso32_start) >> PAGE_SHIFT; - vdso32_pages += data_pages; - vdso32_pagelist = vdso_setup(vdso32_start, vdso32_pages); -#endif - - smp_wmb(); - vdso_ready = 1; - - return 0; -} -arch_initcall(vdso_init); - -const char *arch_vma_name(struct vm_area_struct *vma) -{ - if (vma->vm_mm && vma->vm_start == VDSO_BASE) - return "[vdso]"; -#ifndef __tilegx__ - if (vma->vm_start == MEM_USER_INTRPT) - return "[intrpt]"; -#endif - return NULL; -} - -int setup_vdso_pages(void) -{ - struct page **pagelist; - unsigned long pages; - struct mm_struct *mm = current->mm; - unsigned long vdso_base = 0; - int retval = 0; - - if (!vdso_ready) - return 0; - - mm->context.vdso_base = 0; - - pagelist = vdso_pagelist; - pages = vdso_pages; -#ifdef CONFIG_COMPAT - if (is_compat_task()) { - pagelist = vdso32_pagelist; - pages = vdso32_pages; - } -#endif - - /* - * vDSO has a problem and was disabled, just don't "enable" it for the - * process. - */ - if (pages == 0) - return 0; - - vdso_base = get_unmapped_area(NULL, vdso_base, - (pages << PAGE_SHIFT) + - ((VDSO_ALIGNMENT - 1) & PAGE_MASK), - 0, 0); - if (IS_ERR_VALUE(vdso_base)) { - retval = vdso_base; - return retval; - } - - /* Add required alignment. */ - vdso_base = ALIGN(vdso_base, VDSO_ALIGNMENT); - - /* - * Put vDSO base into mm struct. We need to do this before calling - * install_special_mapping or the perf counter mmap tracking code - * will fail to recognise it as a vDSO (since arch_vma_name fails). - */ - mm->context.vdso_base = vdso_base; - - /* - * our vma flags don't have VM_WRITE so by default, the process isn't - * allowed to write those pages. - * gdb can break that with ptrace interface, and thus trigger COW on - * those pages but it's then your responsibility to never do that on - * the "data" page of the vDSO or you'll stop getting kernel updates - * and your nice userland gettimeofday will be totally dead. - * It's fine to use that for setting breakpoints in the vDSO code - * pages though - */ - retval = install_special_mapping(mm, vdso_base, - pages << PAGE_SHIFT, - VM_READ|VM_EXEC | - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC, - pagelist); - if (retval) - mm->context.vdso_base = 0; - - return retval; -} - -static __init int vdso_func(char *s) -{ - return kstrtouint(s, 0, &vdso_enabled); -} -__setup("vdso=", vdso_func); diff --git a/arch/tile/kernel/vdso/Makefile b/arch/tile/kernel/vdso/Makefile deleted file mode 100644 index b596a7396382..000000000000 --- a/arch/tile/kernel/vdso/Makefile +++ /dev/null @@ -1,117 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# Symbols present in the vdso -vdso-syms = rt_sigreturn gettimeofday - -# Files to link into the vdso -obj-vdso = $(patsubst %, v%.o, $(vdso-syms)) - -# Build rules -targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.lds vdso-dummy.o -obj-vdso := $(addprefix $(obj)/, $(obj-vdso)) - -# vdso32 is only for tilegx -m32 compat task. -VDSO32-$(CONFIG_COMPAT) := y - -obj-y += vdso.o vdso-syms.o -obj-$(VDSO32-y) += vdso32.o -CPPFLAGS_vdso.lds += -P -C -U$(ARCH) - -# vDSO code runs in userspace and -pg doesn't help with profiling anyway. -CFLAGS_REMOVE_vdso.o = -pg -CFLAGS_REMOVE_vdso32.o = -pg -CFLAGS_REMOVE_vrt_sigreturn.o = -pg -CFLAGS_REMOVE_vrt_sigreturn32.o = -pg -CFLAGS_REMOVE_vgettimeofday.o = -pg -CFLAGS_REMOVE_vgettimeofday32.o = -pg - -ifdef CONFIG_FEEDBACK_COLLECT -# vDSO code runs in userspace, not collecting feedback data. -CFLAGS_REMOVE_vdso.o = -ffeedback-generate -CFLAGS_REMOVE_vdso32.o = -ffeedback-generate -CFLAGS_REMOVE_vrt_sigreturn.o = -ffeedback-generate -CFLAGS_REMOVE_vrt_sigreturn32.o = -ffeedback-generate -CFLAGS_REMOVE_vgettimeofday.o = -ffeedback-generate -CFLAGS_REMOVE_vgettimeofday32.o = -ffeedback-generate -endif - -# Disable gcov profiling for VDSO code -GCOV_PROFILE := n - -# Force dependency -$(obj)/vdso.o: $(obj)/vdso.so - -# link rule for the .so file, .lds has to be first -SYSCFLAGS_vdso.so.dbg = $(c_flags) -$(obj)/vdso.so.dbg: $(src)/vdso.lds $(obj-vdso) FORCE - $(call if_changed,vdsold) - -# We also create a special relocatable object that should mirror the symbol -# table and layout of the linked DSO. With ld -R we can then refer to -# these symbols in the kernel code rather than hand-coded addresses. - -SYSCFLAGS_vdso.so.dbg = -shared -s -Wl,-soname=linux-vdso.so.1 \ - $(call cc-ldoption, -Wl$(comma)--hash-style=both) -SYSCFLAGS_vdso_dummy.o = -r -$(obj)/vdso-dummy.o: $(src)/vdso.lds $(obj)/vrt_sigreturn.o FORCE - $(call if_changed,vdsold) - -LDFLAGS_vdso-syms.o := -r -R -$(obj)/vdso-syms.o: $(obj)/vdso-dummy.o FORCE - $(call if_changed,ld) - -# strip rule for the .so file -$(obj)/%.so: OBJCOPYFLAGS := -S -$(obj)/%.so: $(obj)/%.so.dbg FORCE - $(call if_changed,objcopy) - -# actual build commands -# The DSO images are built using a special linker script -# Add -lgcc so tilepro gets static muldi3 and lshrdi3 definitions. -# Make sure only to export the intended __vdso_xxx symbol offsets. -quiet_cmd_vdsold = VDSOLD $@ - cmd_vdsold = $(CC) $(KCFLAGS) -nostdlib $(SYSCFLAGS_$(@F)) \ - -Wl,-T,$(filter-out FORCE,$^) -o $@.tmp -lgcc && \ - $(CROSS_COMPILE)objcopy \ - $(patsubst %, -G __vdso_%, $(vdso-syms)) $@.tmp $@ - -# install commands for the unstripped file -quiet_cmd_vdso_install = INSTALL $@ - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@ - -vdso.so: $(obj)/vdso.so.dbg - @mkdir -p $(MODLIB)/vdso - $(call cmd,vdso_install) - -vdso32.so: $(obj)/vdso32.so.dbg - $(call cmd,vdso_install) - -vdso_install: vdso.so -vdso32_install: vdso32.so - - -KBUILD_AFLAGS_32 := $(filter-out -m64,$(KBUILD_AFLAGS)) -KBUILD_AFLAGS_32 += -m32 -s -KBUILD_CFLAGS_32 := $(filter-out -m64,$(KBUILD_CFLAGS)) -KBUILD_CFLAGS_32 += -m32 -fPIC -shared - -obj-vdso32 = $(patsubst %, v%32.o, $(vdso-syms)) - -targets += $(obj-vdso32) vdso32.so vdso32.so.dbg -obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32)) - -$(obj-vdso32:%=%): KBUILD_AFLAGS = $(KBUILD_AFLAGS_32) -$(obj-vdso32:%=%): KBUILD_CFLAGS = $(KBUILD_CFLAGS_32) - -$(obj)/vgettimeofday32.o: $(obj)/vgettimeofday.c FORCE - $(call if_changed_rule,cc_o_c) - -$(obj)/vrt_sigreturn32.o: $(obj)/vrt_sigreturn.S FORCE - $(call if_changed,as_o_S) - -# Force dependency -$(obj)/vdso32.o: $(obj)/vdso32.so - -SYSCFLAGS_vdso32.so.dbg = -m32 -shared -s -Wl,-soname=linux-vdso32.so.1 \ - $(call cc-ldoption, -Wl$(comma)--hash-style=both) -$(obj)/vdso32.so.dbg: $(src)/vdso.lds $(obj-vdso32) FORCE - $(call if_changed,vdsold) diff --git a/arch/tile/kernel/vdso/vdso.S b/arch/tile/kernel/vdso/vdso.S deleted file mode 100644 index 3467adb41630..000000000000 --- a/arch/tile/kernel/vdso/vdso.S +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/init.h> -#include <linux/linkage.h> -#include <asm/page.h> - - __PAGE_ALIGNED_DATA - - .global vdso_start, vdso_end - .align PAGE_SIZE -vdso_start: - .incbin "arch/tile/kernel/vdso/vdso.so" - .align PAGE_SIZE -vdso_end: - - .previous diff --git a/arch/tile/kernel/vdso/vdso.lds.S b/arch/tile/kernel/vdso/vdso.lds.S deleted file mode 100644 index 731529f3f06f..000000000000 --- a/arch/tile/kernel/vdso/vdso.lds.S +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#define VDSO_VERSION_STRING LINUX_2.6 - - -OUTPUT_ARCH(tile) - -/* The ELF entry point can be used to set the AT_SYSINFO value. */ -ENTRY(__vdso_rt_sigreturn); - - -SECTIONS -{ - . = SIZEOF_HEADERS; - - .hash : { *(.hash) } :text - .gnu.hash : { *(.gnu.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .gnu.version : { *(.gnu.version) } - .gnu.version_d : { *(.gnu.version_d) } - .gnu.version_r : { *(.gnu.version_r) } - - .note : { *(.note.*) } :text :note - .dynamic : { *(.dynamic) } :text :dynamic - - .eh_frame_hdr : { *(.eh_frame_hdr) } :text :eh_frame_hdr - .eh_frame : { KEEP (*(.eh_frame)) } :text - - .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) } - - /* - * This linker script is used both with -r and with -shared. - * For the layouts to match, we need to skip more than enough - * space for the dynamic symbol table et al. If this amount - * is insufficient, ld -shared will barf. Just increase it here. - */ - . = 0x1000; - .text : { *(.text .text.*) } :text - - .data : { - *(.got.plt) *(.got) - *(.data .data.* .gnu.linkonce.d.*) - *(.dynbss) - *(.bss .bss.* .gnu.linkonce.b.*) - } -} - - -/* - * We must supply the ELF program headers explicitly to get just one - * PT_LOAD segment, and set the flags explicitly to make segments read-only. - */ -PHDRS -{ - text PT_LOAD FLAGS(5) FILEHDR PHDRS; /* PF_R|PF_X */ - dynamic PT_DYNAMIC FLAGS(4); /* PF_R */ - note PT_NOTE FLAGS(4); /* PF_R */ - eh_frame_hdr PT_GNU_EH_FRAME; -} - - -/* - * This controls what userland symbols we export from the vDSO. - */ -VERSION -{ - VDSO_VERSION_STRING { - global: - __vdso_rt_sigreturn; - __vdso_gettimeofday; - gettimeofday; - __vdso_clock_gettime; - clock_gettime; - local:*; - }; -} diff --git a/arch/tile/kernel/vdso/vdso32.S b/arch/tile/kernel/vdso/vdso32.S deleted file mode 100644 index 1d1ac3257e11..000000000000 --- a/arch/tile/kernel/vdso/vdso32.S +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright 2013 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/init.h> -#include <linux/linkage.h> -#include <asm/page.h> - - __PAGE_ALIGNED_DATA - - .global vdso32_start, vdso32_end - .align PAGE_SIZE -vdso32_start: - .incbin "arch/tile/kernel/vdso/vdso32.so" - .align PAGE_SIZE -vdso32_end: - - .previous diff --git a/arch/tile/kernel/vdso/vgettimeofday.c b/arch/tile/kernel/vdso/vgettimeofday.c deleted file mode 100644 index e63310c49742..000000000000 --- a/arch/tile/kernel/vdso/vgettimeofday.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#define VDSO_BUILD /* avoid some shift warnings for -m32 in <asm/page.h> */ -#include <linux/time.h> -#include <asm/timex.h> -#include <asm/unistd.h> -#include <asm/vdso.h> - -#if CHIP_HAS_SPLIT_CYCLE() -static inline cycles_t get_cycles_inline(void) -{ - unsigned int high = __insn_mfspr(SPR_CYCLE_HIGH); - unsigned int low = __insn_mfspr(SPR_CYCLE_LOW); - unsigned int high2 = __insn_mfspr(SPR_CYCLE_HIGH); - - while (unlikely(high != high2)) { - low = __insn_mfspr(SPR_CYCLE_LOW); - high = high2; - high2 = __insn_mfspr(SPR_CYCLE_HIGH); - } - - return (((cycles_t)high) << 32) | low; -} -#define get_cycles get_cycles_inline -#endif - -struct syscall_return_value { - long value; - long error; -}; - -/* - * Find out the vDSO data page address in the process address space. - */ -inline unsigned long get_datapage(void) -{ - unsigned long ret; - - /* vdso data page located in the 2nd vDSO page. */ - asm volatile ("lnk %0" : "=r"(ret)); - ret &= ~(PAGE_SIZE - 1); - ret += PAGE_SIZE; - - return ret; -} - -static inline u64 vgetsns(struct vdso_data *vdso) -{ - return ((get_cycles() - vdso->cycle_last) & vdso->mask) * vdso->mult; -} - -static inline int do_realtime(struct vdso_data *vdso, struct timespec *ts) -{ - unsigned count; - u64 ns; - - do { - count = raw_read_seqcount_begin(&vdso->tb_seq); - ts->tv_sec = vdso->wall_time_sec; - ns = vdso->wall_time_snsec; - ns += vgetsns(vdso); - ns >>= vdso->shift; - } while (unlikely(read_seqcount_retry(&vdso->tb_seq, count))); - - ts->tv_sec += __iter_div_u64_rem(ns, NSEC_PER_SEC, &ns); - ts->tv_nsec = ns; - - return 0; -} - -static inline int do_monotonic(struct vdso_data *vdso, struct timespec *ts) -{ - unsigned count; - u64 ns; - - do { - count = raw_read_seqcount_begin(&vdso->tb_seq); - ts->tv_sec = vdso->monotonic_time_sec; - ns = vdso->monotonic_time_snsec; - ns += vgetsns(vdso); - ns >>= vdso->shift; - } while (unlikely(read_seqcount_retry(&vdso->tb_seq, count))); - - ts->tv_sec += __iter_div_u64_rem(ns, NSEC_PER_SEC, &ns); - ts->tv_nsec = ns; - - return 0; -} - -static inline int do_realtime_coarse(struct vdso_data *vdso, - struct timespec *ts) -{ - unsigned count; - - do { - count = raw_read_seqcount_begin(&vdso->tb_seq); - ts->tv_sec = vdso->wall_time_coarse_sec; - ts->tv_nsec = vdso->wall_time_coarse_nsec; - } while (unlikely(read_seqcount_retry(&vdso->tb_seq, count))); - - return 0; -} - -static inline int do_monotonic_coarse(struct vdso_data *vdso, - struct timespec *ts) -{ - unsigned count; - - do { - count = raw_read_seqcount_begin(&vdso->tb_seq); - ts->tv_sec = vdso->monotonic_time_coarse_sec; - ts->tv_nsec = vdso->monotonic_time_coarse_nsec; - } while (unlikely(read_seqcount_retry(&vdso->tb_seq, count))); - - return 0; -} - -struct syscall_return_value __vdso_gettimeofday(struct timeval *tv, - struct timezone *tz) -{ - struct syscall_return_value ret = { 0, 0 }; - unsigned count; - struct vdso_data *vdso = (struct vdso_data *)get_datapage(); - - /* The use of the timezone is obsolete, normally tz is NULL. */ - if (unlikely(tz != NULL)) { - do { - count = raw_read_seqcount_begin(&vdso->tz_seq); - tz->tz_minuteswest = vdso->tz_minuteswest; - tz->tz_dsttime = vdso->tz_dsttime; - } while (unlikely(read_seqcount_retry(&vdso->tz_seq, count))); - } - - if (unlikely(tv == NULL)) - return ret; - - do_realtime(vdso, (struct timespec *)tv); - tv->tv_usec /= 1000; - - return ret; -} - -int gettimeofday(struct timeval *tv, struct timezone *tz) - __attribute__((weak, alias("__vdso_gettimeofday"))); - -static struct syscall_return_value vdso_fallback_gettime(long clock, - struct timespec *ts) -{ - struct syscall_return_value ret; - __asm__ __volatile__ ( - "swint1" - : "=R00" (ret.value), "=R01" (ret.error) - : "R10" (__NR_clock_gettime), "R00" (clock), "R01" (ts) - : "r2", "r3", "r4", "r5", "r6", "r7", - "r8", "r9", "r11", "r12", "r13", "r14", "r15", - "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", - "r24", "r25", "r26", "r27", "r28", "r29", "memory"); - return ret; -} - -struct syscall_return_value __vdso_clock_gettime(clockid_t clock, - struct timespec *ts) -{ - struct vdso_data *vdso = (struct vdso_data *)get_datapage(); - struct syscall_return_value ret = { 0, 0 }; - - switch (clock) { - case CLOCK_REALTIME: - do_realtime(vdso, ts); - return ret; - case CLOCK_MONOTONIC: - do_monotonic(vdso, ts); - return ret; - case CLOCK_REALTIME_COARSE: - do_realtime_coarse(vdso, ts); - return ret; - case CLOCK_MONOTONIC_COARSE: - do_monotonic_coarse(vdso, ts); - return ret; - default: - return vdso_fallback_gettime(clock, ts); - } -} - -int clock_gettime(clockid_t clock, struct timespec *ts) - __attribute__((weak, alias("__vdso_clock_gettime"))); diff --git a/arch/tile/kernel/vdso/vrt_sigreturn.S b/arch/tile/kernel/vdso/vrt_sigreturn.S deleted file mode 100644 index 6326caf4a039..000000000000 --- a/arch/tile/kernel/vdso/vrt_sigreturn.S +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/linkage.h> -#include <arch/abi.h> -#include <asm/unistd.h> - -/* - * Note that libc has a copy of this function that it uses to compare - * against the PC when a stack backtrace ends, so if this code is - * changed, the libc implementation(s) should also be updated. - */ -ENTRY(__vdso_rt_sigreturn) - moveli TREG_SYSCALL_NR_NAME, __NR_rt_sigreturn - swint1 - /* We don't use ENDPROC to avoid tagging this symbol as FUNC, - * which confuses the perf tool. - */ - END(__vdso_rt_sigreturn) diff --git a/arch/tile/kernel/vmlinux.lds.S b/arch/tile/kernel/vmlinux.lds.S deleted file mode 100644 index 3558d981e336..000000000000 --- a/arch/tile/kernel/vmlinux.lds.S +++ /dev/null @@ -1,105 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#include <asm-generic/vmlinux.lds.h> -#include <asm/page.h> -#include <asm/cache.h> -#include <asm/thread_info.h> -#include <hv/hypervisor.h> - -/* Text loads starting from the supervisor interrupt vector address. */ -#define TEXT_OFFSET MEM_SV_START - -OUTPUT_ARCH(tile) -ENTRY(_start) -jiffies = jiffies_64; - -PHDRS -{ - intrpt PT_LOAD ; - text PT_LOAD ; - data PT_LOAD ; -} -SECTIONS -{ - /* Text is loaded with a different VA than data; start with text. */ - #undef LOAD_OFFSET - #define LOAD_OFFSET TEXT_OFFSET - - /* Interrupt vectors */ - .intrpt (LOAD_OFFSET) : AT ( 0 ) /* put at the start of physical memory */ - { - _text = .; - *(.intrpt) - } :intrpt =0 - - /* Hypervisor call vectors */ - . = ALIGN(0x10000); - .hvglue : AT (ADDR(.hvglue) - LOAD_OFFSET) { - *(.hvglue) - } :NONE - - /* Now the real code */ - . = ALIGN(0x20000); - _stext = .; - .text : AT (ADDR(.text) - LOAD_OFFSET) { - HEAD_TEXT - SCHED_TEXT - CPUIDLE_TEXT - LOCK_TEXT - KPROBES_TEXT - IRQENTRY_TEXT - SOFTIRQENTRY_TEXT - __fix_text_end = .; /* tile-cpack won't rearrange before this */ - ALIGN_FUNCTION(); - *(.hottext*) - TEXT_TEXT - *(.text.*) - *(.coldtext*) - *(.fixup) - *(.gnu.warning) - } :text =0 - _etext = .; - - /* "Init" is divided into two areas with very different virtual addresses. */ - INIT_TEXT_SECTION(PAGE_SIZE) - - /* - * Some things, like the __jump_table, may contain symbol references - * to __exit text, so include such text in the final image if so. - * In that case we also override the _einittext from INIT_TEXT_SECTION. - */ -#ifdef CONFIG_JUMP_LABEL - .exit.text : { - EXIT_TEXT - _einittext = .; - } -#endif - - /* Now we skip back to PAGE_OFFSET for the data. */ - . = (. - TEXT_OFFSET + PAGE_OFFSET); - #undef LOAD_OFFSET - #define LOAD_OFFSET PAGE_OFFSET - - . = ALIGN(PAGE_SIZE); - __init_begin = .; - INIT_DATA_SECTION(16) :data =0 - PERCPU_SECTION(L2_CACHE_BYTES) - . = ALIGN(PAGE_SIZE); - __init_end = .; - - _sdata = .; /* Start of data section */ - RO_DATA_SECTION(PAGE_SIZE) - RW_DATA_SECTION(L2_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) - _edata = .; - - EXCEPTION_TABLE(L2_CACHE_BYTES) - NOTES - - - BSS_SECTION(8, PAGE_SIZE, 1) - _end = . ; - - STABS_DEBUG - DWARF_DEBUG - - DISCARDS -} diff --git a/arch/tile/kvm/Kconfig b/arch/tile/kvm/Kconfig deleted file mode 100644 index efce89a8473b..000000000000 --- a/arch/tile/kvm/Kconfig +++ /dev/null @@ -1,39 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# KVM configuration -# - -source "virt/kvm/Kconfig" - -menuconfig VIRTUALIZATION - bool "Virtualization" - ---help--- - Say Y here to get to see options for using your Linux host to run - other operating systems inside virtual machines (guests). - This option alone does not add any kernel code. - - If you say N, all options in this submenu will be skipped and - disabled. - -if VIRTUALIZATION - -config KVM - tristate "Kernel-based Virtual Machine (KVM) support" - depends on HAVE_KVM && MODULES - select PREEMPT_NOTIFIERS - select ANON_INODES - select SRCU - ---help--- - Support hosting paravirtualized guest machines. - - This module provides access to the hardware capabilities through - a character device node named /dev/kvm. - - To compile this as a module, choose M here: the module - will be called kvm. - - If unsure, say N. - -source drivers/vhost/Kconfig - -endif # VIRTUALIZATION diff --git a/arch/tile/lib/Makefile b/arch/tile/lib/Makefile deleted file mode 100644 index 815a1fdeb2e4..000000000000 --- a/arch/tile/lib/Makefile +++ /dev/null @@ -1,19 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for TILE-specific library files.. -# - -lib-y = cacheflush.o checksum.o cpumask.o delay.o uaccess.o \ - memmove.o memcpy_$(BITS).o memchr_$(BITS).o memset_$(BITS).o \ - strchr_$(BITS).o strlen_$(BITS).o strnlen_$(BITS).o - -lib-$(CONFIG_TILEGX) += memcpy_user_64.o -lib-$(CONFIG_TILEPRO) += atomic_32.o atomic_asm_32.o -lib-$(CONFIG_SMP) += spinlock_$(BITS).o usercopy_$(BITS).o - -obj-$(CONFIG_MODULES) += exports.o - -# The finv_buffer_remote() and copy_{to,from}_user() routines can't -# have -pg added, since they both rely on being leaf functions. -CFLAGS_REMOVE_cacheflush.o = -pg -CFLAGS_REMOVE_memcpy_user_64.o = -pg diff --git a/arch/tile/lib/atomic_32.c b/arch/tile/lib/atomic_32.c deleted file mode 100644 index f8128800dbf5..000000000000 --- a/arch/tile/lib/atomic_32.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/cache.h> -#include <linux/delay.h> -#include <linux/uaccess.h> -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/atomic.h> -#include <arch/chip.h> - -/* This page is remapped on startup to be hash-for-home. */ -int atomic_locks[PAGE_SIZE / sizeof(int)] __page_aligned_bss; - -int *__atomic_hashed_lock(volatile void *v) -{ - /* NOTE: this code must match "sys_cmpxchg" in kernel/intvec_32.S */ - /* - * Use bits [3, 3 + ATOMIC_HASH_SHIFT) as the lock index. - * Using mm works here because atomic_locks is page aligned. - */ - unsigned long ptr = __insn_mm((unsigned long)v >> 1, - (unsigned long)atomic_locks, - 2, (ATOMIC_HASH_SHIFT + 2) - 1); - return (int *)ptr; -} - -#ifdef CONFIG_SMP -/* Return whether the passed pointer is a valid atomic lock pointer. */ -static int is_atomic_lock(int *p) -{ - return p >= &atomic_locks[0] && p < &atomic_locks[ATOMIC_HASH_SIZE]; -} - -void __atomic_fault_unlock(int *irqlock_word) -{ - BUG_ON(!is_atomic_lock(irqlock_word)); - BUG_ON(*irqlock_word != 1); - *irqlock_word = 0; -} - -#endif /* CONFIG_SMP */ - -static inline int *__atomic_setup(volatile void *v) -{ - /* Issue a load to the target to bring it into cache. */ - *(volatile int *)v; - return __atomic_hashed_lock(v); -} - -int _atomic_xchg(int *v, int n) -{ - return __atomic32_xchg(v, __atomic_setup(v), n).val; -} -EXPORT_SYMBOL(_atomic_xchg); - -int _atomic_xchg_add(int *v, int i) -{ - return __atomic32_xchg_add(v, __atomic_setup(v), i).val; -} -EXPORT_SYMBOL(_atomic_xchg_add); - -int _atomic_xchg_add_unless(int *v, int a, int u) -{ - /* - * Note: argument order is switched here since it is easier - * to use the first argument consistently as the "old value" - * in the assembly, as is done for _atomic_cmpxchg(). - */ - return __atomic32_xchg_add_unless(v, __atomic_setup(v), u, a).val; -} -EXPORT_SYMBOL(_atomic_xchg_add_unless); - -int _atomic_cmpxchg(int *v, int o, int n) -{ - return __atomic32_cmpxchg(v, __atomic_setup(v), o, n).val; -} -EXPORT_SYMBOL(_atomic_cmpxchg); - -unsigned long _atomic_fetch_or(volatile unsigned long *p, unsigned long mask) -{ - return __atomic32_fetch_or((int *)p, __atomic_setup(p), mask).val; -} -EXPORT_SYMBOL(_atomic_fetch_or); - -unsigned long _atomic_fetch_and(volatile unsigned long *p, unsigned long mask) -{ - return __atomic32_fetch_and((int *)p, __atomic_setup(p), mask).val; -} -EXPORT_SYMBOL(_atomic_fetch_and); - -unsigned long _atomic_fetch_andn(volatile unsigned long *p, unsigned long mask) -{ - return __atomic32_fetch_andn((int *)p, __atomic_setup(p), mask).val; -} -EXPORT_SYMBOL(_atomic_fetch_andn); - -unsigned long _atomic_fetch_xor(volatile unsigned long *p, unsigned long mask) -{ - return __atomic32_fetch_xor((int *)p, __atomic_setup(p), mask).val; -} -EXPORT_SYMBOL(_atomic_fetch_xor); - - -long long _atomic64_xchg(long long *v, long long n) -{ - return __atomic64_xchg(v, __atomic_setup(v), n); -} -EXPORT_SYMBOL(_atomic64_xchg); - -long long _atomic64_xchg_add(long long *v, long long i) -{ - return __atomic64_xchg_add(v, __atomic_setup(v), i); -} -EXPORT_SYMBOL(_atomic64_xchg_add); - -long long _atomic64_xchg_add_unless(long long *v, long long a, long long u) -{ - /* - * Note: argument order is switched here since it is easier - * to use the first argument consistently as the "old value" - * in the assembly, as is done for _atomic_cmpxchg(). - */ - return __atomic64_xchg_add_unless(v, __atomic_setup(v), u, a); -} -EXPORT_SYMBOL(_atomic64_xchg_add_unless); - -long long _atomic64_cmpxchg(long long *v, long long o, long long n) -{ - return __atomic64_cmpxchg(v, __atomic_setup(v), o, n); -} -EXPORT_SYMBOL(_atomic64_cmpxchg); - -long long _atomic64_fetch_and(long long *v, long long n) -{ - return __atomic64_fetch_and(v, __atomic_setup(v), n); -} -EXPORT_SYMBOL(_atomic64_fetch_and); - -long long _atomic64_fetch_or(long long *v, long long n) -{ - return __atomic64_fetch_or(v, __atomic_setup(v), n); -} -EXPORT_SYMBOL(_atomic64_fetch_or); - -long long _atomic64_fetch_xor(long long *v, long long n) -{ - return __atomic64_fetch_xor(v, __atomic_setup(v), n); -} -EXPORT_SYMBOL(_atomic64_fetch_xor); - -/* - * If any of the atomic or futex routines hit a bad address (not in - * the page tables at kernel PL) this routine is called. The futex - * routines are never used on kernel space, and the normal atomics and - * bitops are never used on user space. So a fault on kernel space - * must be fatal, but a fault on userspace is a futex fault and we - * need to return -EFAULT. Note that the context this routine is - * invoked in is the context of the "_atomic_xxx()" routines called - * by the functions in this file. - */ -struct __get_user __atomic_bad_address(int __user *addr) -{ - if (unlikely(!access_ok(VERIFY_WRITE, addr, sizeof(int)))) - panic("Bad address used for kernel atomic op: %p\n", addr); - return (struct __get_user) { .err = -EFAULT }; -} - - -void __init __init_atomic_per_cpu(void) -{ - /* Validate power-of-two and "bigger than cpus" assumption */ - BUILD_BUG_ON(ATOMIC_HASH_SIZE & (ATOMIC_HASH_SIZE-1)); - BUG_ON(ATOMIC_HASH_SIZE < nr_cpu_ids); - - /* - * On TILEPro we prefer to use a single hash-for-home - * page, since this means atomic operations are less - * likely to encounter a TLB fault and thus should - * in general perform faster. You may wish to disable - * this in situations where few hash-for-home tiles - * are configured. - */ - BUG_ON((unsigned long)atomic_locks % PAGE_SIZE != 0); - - /* The locks must all fit on one page. */ - BUILD_BUG_ON(ATOMIC_HASH_SIZE * sizeof(int) > PAGE_SIZE); - - /* - * We use the page offset of the atomic value's address as - * an index into atomic_locks, excluding the low 3 bits. - * That should not produce more indices than ATOMIC_HASH_SIZE. - */ - BUILD_BUG_ON((PAGE_SIZE >> 3) > ATOMIC_HASH_SIZE); -} diff --git a/arch/tile/lib/atomic_asm_32.S b/arch/tile/lib/atomic_asm_32.S deleted file mode 100644 index 94709ab41ed8..000000000000 --- a/arch/tile/lib/atomic_asm_32.S +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Support routines for atomic operations. Each function takes: - * - * r0: address to manipulate - * r1: pointer to atomic lock guarding this operation (for ATOMIC_LOCK_REG) - * r2: new value to write, or for cmpxchg/add_unless, value to compare against - * r3: (cmpxchg/xchg_add_unless) new value to write or add; - * (atomic64 ops) high word of value to write - * r4/r5: (cmpxchg64/add_unless64) new value to write or add - * - * The 32-bit routines return a "struct __get_user" so that the futex code - * has an opportunity to return -EFAULT to the user if needed. - * The 64-bit routines just return a "long long" with the value, - * since they are only used from kernel space and don't expect to fault. - * Support for 16-bit ops is included in the framework but we don't provide any. - * - * Note that the caller is advised to issue a suitable L1 or L2 - * prefetch on the address being manipulated to avoid extra stalls. - * In addition, the hot path is on two icache lines, and we start with - * a jump to the second line to make sure they are both in cache so - * that we never stall waiting on icache fill while holding the lock. - * (This doesn't work out with most 64-bit ops, since they consume - * too many bundles, so may take an extra i-cache stall.) - * - * These routines set the INTERRUPT_CRITICAL_SECTION bit, just - * like sys_cmpxchg(), so that NMIs like PERF_COUNT will not interrupt - * the code, just page faults. - * - * If the load or store faults in a way that can be directly fixed in - * the do_page_fault_ics() handler (e.g. a vmalloc reference) we fix it - * directly, return to the instruction that faulted, and retry it. - * - * If the load or store faults in a way that potentially requires us - * to release the atomic lock, then retry (e.g. a migrating PTE), we - * reset the PC in do_page_fault_ics() to the "tns" instruction so - * that on return we will reacquire the lock and restart the op. We - * are somewhat overloading the exception_table_entry notion by doing - * this, since those entries are not normally used for migrating PTEs. - * - * If the main page fault handler discovers a bad address, it will see - * the PC pointing to the "tns" instruction (due to the earlier - * exception_table_entry processing in do_page_fault_ics), and - * re-reset the PC to the fault handler, atomic_bad_address(), which - * effectively takes over from the atomic op and can either return a - * bad "struct __get_user" (for user addresses) or can just panic (for - * bad kernel addresses). - * - * Note that if the value we would store is the same as what we - * loaded, we bypass the store. Other platforms with true atomics can - * make the guarantee that a non-atomic __clear_bit(), for example, - * can safely race with an atomic test_and_set_bit(); this example is - * from bit_spinlock.h in slub_lock() / slub_unlock(). We can't do - * that on Tile since the "atomic" op is really just a - * read/modify/write, and can race with the non-atomic - * read/modify/write. However, if we can short-circuit the write when - * it is not needed, in the atomic case, we avoid the race. - */ - -#include <linux/linkage.h> -#include <asm/atomic_32.h> -#include <asm/page.h> -#include <asm/processor.h> - - .section .text.atomic,"ax" -ENTRY(__start_atomic_asm_code) - - .macro atomic_op, name, bitwidth, body - .align 64 -STD_ENTRY_SECTION(__atomic\name, .text.atomic) - { - movei r24, 1 - j 4f /* branch to second cache line */ - } -1: { - .ifc \bitwidth,16 - lh r22, r0 - .else - lw r22, r0 - addi r28, r0, 4 - .endif - } - .ifc \bitwidth,64 - lw r23, r28 - .endif - \body /* set r24, and r25 if 64-bit */ - { - seq r26, r22, r24 - seq r27, r23, r25 - } - .ifc \bitwidth,64 - bbnst r27, 2f - .endif - bbs r26, 3f /* skip write-back if it's the same value */ -2: { - .ifc \bitwidth,16 - sh r0, r24 - .else - sw r0, r24 - .endif - } - .ifc \bitwidth,64 - sw r28, r25 - .endif - mf -3: { - move r0, r22 - .ifc \bitwidth,64 - move r1, r23 - .else - move r1, zero - .endif - sw ATOMIC_LOCK_REG_NAME, zero - } - mtspr INTERRUPT_CRITICAL_SECTION, zero - jrp lr -4: { - move ATOMIC_LOCK_REG_NAME, r1 - mtspr INTERRUPT_CRITICAL_SECTION, r24 - } -#ifndef CONFIG_SMP - j 1b /* no atomic locks */ -#else - { - tns r21, ATOMIC_LOCK_REG_NAME - moveli r23, 2048 /* maximum backoff time in cycles */ - } - { - bzt r21, 1b /* branch if lock acquired */ - moveli r25, 32 /* starting backoff time in cycles */ - } -5: mtspr INTERRUPT_CRITICAL_SECTION, zero - mfspr r26, CYCLE_LOW /* get start point for this backoff */ -6: mfspr r22, CYCLE_LOW /* test to see if we've backed off enough */ - sub r22, r22, r26 - slt r22, r22, r25 - bbst r22, 6b - { - mtspr INTERRUPT_CRITICAL_SECTION, r24 - shli r25, r25, 1 /* double the backoff; retry the tns */ - } - { - tns r21, ATOMIC_LOCK_REG_NAME - slt r26, r23, r25 /* is the proposed backoff too big? */ - } - { - bzt r21, 1b /* branch if lock acquired */ - mvnz r25, r26, r23 - } - j 5b -#endif - STD_ENDPROC(__atomic\name) - .ifc \bitwidth,32 - .pushsection __ex_table,"a" - .align 4 - .word 1b, __atomic\name - .word 2b, __atomic\name - .word __atomic\name, __atomic_bad_address - .popsection - .endif - .endm - - -/* - * Use __atomic32 prefix to avoid collisions with GCC builtin __atomic functions. - */ - -atomic_op 32_cmpxchg, 32, "seq r26, r22, r2; { bbns r26, 3f; move r24, r3 }" -atomic_op 32_xchg, 32, "move r24, r2" -atomic_op 32_xchg_add, 32, "add r24, r22, r2" -atomic_op 32_xchg_add_unless, 32, \ - "sne r26, r22, r2; { bbns r26, 3f; add r24, r22, r3 }" -atomic_op 32_fetch_or, 32, "or r24, r22, r2" -atomic_op 32_fetch_and, 32, "and r24, r22, r2" -atomic_op 32_fetch_andn, 32, "nor r2, r2, zero; and r24, r22, r2" -atomic_op 32_fetch_xor, 32, "xor r24, r22, r2" - -atomic_op 64_cmpxchg, 64, "{ seq r26, r22, r2; seq r27, r23, r3 }; \ - { bbns r26, 3f; move r24, r4 }; { bbns r27, 3f; move r25, r5 }" -atomic_op 64_xchg, 64, "{ move r24, r2; move r25, r3 }" -atomic_op 64_xchg_add, 64, "{ add r24, r22, r2; add r25, r23, r3 }; \ - slt_u r26, r24, r22; add r25, r25, r26" -atomic_op 64_xchg_add_unless, 64, \ - "{ sne r26, r22, r2; sne r27, r23, r3 }; \ - { bbns r26, 3f; add r24, r22, r4 }; \ - { bbns r27, 3f; add r25, r23, r5 }; \ - slt_u r26, r24, r22; add r25, r25, r26" -atomic_op 64_fetch_or, 64, "{ or r24, r22, r2; or r25, r23, r3 }" -atomic_op 64_fetch_and, 64, "{ and r24, r22, r2; and r25, r23, r3 }" -atomic_op 64_fetch_xor, 64, "{ xor r24, r22, r2; xor r25, r23, r3 }" - - jrp lr /* happy backtracer */ - -ENTRY(__end_atomic_asm_code) diff --git a/arch/tile/lib/cacheflush.c b/arch/tile/lib/cacheflush.c deleted file mode 100644 index c1ebc1065fc1..000000000000 --- a/arch/tile/lib/cacheflush.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/export.h> -#include <asm/page.h> -#include <asm/cacheflush.h> -#include <arch/icache.h> -#include <arch/spr_def.h> - - -void __flush_icache_range(unsigned long start, unsigned long end) -{ - invalidate_icache((const void *)start, end - start, PAGE_SIZE); -} - - -/* Force a load instruction to issue. */ -static inline void force_load(char *p) -{ - *(volatile char *)p; -} - -/* - * Flush and invalidate a VA range that is homed remotely on a single - * core (if "!hfh") or homed via hash-for-home (if "hfh"), waiting - * until the memory controller holds the flushed values. - */ -void __attribute__((optimize("omit-frame-pointer"))) -finv_buffer_remote(void *buffer, size_t size, int hfh) -{ - char *p, *base; - size_t step_size, load_count; - - /* - * On TILEPro the striping granularity is a fixed 8KB; on - * TILE-Gx it is configurable, and we rely on the fact that - * the hypervisor always configures maximum striping, so that - * bits 9 and 10 of the PA are part of the stripe function, so - * every 512 bytes we hit a striping boundary. - * - */ -#ifdef __tilegx__ - const unsigned long STRIPE_WIDTH = 512; -#else - const unsigned long STRIPE_WIDTH = 8192; -#endif - -#ifdef __tilegx__ - /* - * On TILE-Gx, we must disable the dstream prefetcher before doing - * a cache flush; otherwise, we could end up with data in the cache - * that we don't want there. Note that normally we'd do an mf - * after the SPR write to disabling the prefetcher, but we do one - * below, before any further loads, so there's no need to do it - * here. - */ - uint_reg_t old_dstream_pf = __insn_mfspr(SPR_DSTREAM_PF); - __insn_mtspr(SPR_DSTREAM_PF, 0); -#endif - - /* - * Flush and invalidate the buffer out of the local L1/L2 - * and request the home cache to flush and invalidate as well. - */ - __finv_buffer(buffer, size); - - /* - * Wait for the home cache to acknowledge that it has processed - * all the flush-and-invalidate requests. This does not mean - * that the flushed data has reached the memory controller yet, - * but it does mean the home cache is processing the flushes. - */ - __insn_mf(); - - /* - * Issue a load to the last cache line, which can't complete - * until all the previously-issued flushes to the same memory - * controller have also completed. If we weren't striping - * memory, that one load would be sufficient, but since we may - * be, we also need to back up to the last load issued to - * another memory controller, which would be the point where - * we crossed a "striping" boundary (the granularity of striping - * across memory controllers). Keep backing up and doing this - * until we are before the beginning of the buffer, or have - * hit all the controllers. - * - * If we are flushing a hash-for-home buffer, it's even worse. - * Each line may be homed on a different tile, and each tile - * may have up to four lines that are on different - * controllers. So as we walk backwards, we have to touch - * enough cache lines to satisfy these constraints. In - * practice this ends up being close enough to "load from - * every cache line on a full memory stripe on each - * controller" that we simply do that, to simplify the logic. - * - * On TILE-Gx the hash-for-home function is much more complex, - * with the upshot being we can't readily guarantee we have - * hit both entries in the 128-entry AMT that were hit by any - * load in the entire range, so we just re-load them all. - * With larger buffers, we may want to consider using a hypervisor - * trap to issue loads directly to each hash-for-home tile for - * each controller (doing it from Linux would trash the TLB). - */ - if (hfh) { - step_size = L2_CACHE_BYTES; -#ifdef __tilegx__ - load_count = (size + L2_CACHE_BYTES - 1) / L2_CACHE_BYTES; -#else - load_count = (STRIPE_WIDTH / L2_CACHE_BYTES) * - (1 << CHIP_LOG_NUM_MSHIMS()); -#endif - } else { - step_size = STRIPE_WIDTH; - load_count = (1 << CHIP_LOG_NUM_MSHIMS()); - } - - /* Load the last byte of the buffer. */ - p = (char *)buffer + size - 1; - force_load(p); - - /* Bump down to the end of the previous stripe or cache line. */ - p -= step_size; - p = (char *)((unsigned long)p | (step_size - 1)); - - /* Figure out how far back we need to go. */ - base = p - (step_size * (load_count - 2)); - if ((unsigned long)base < (unsigned long)buffer) - base = buffer; - - /* Fire all the loads we need. */ - for (; p >= base; p -= step_size) - force_load(p); - - /* - * Repeat, but with finv's instead of loads, to get rid of the - * data we just loaded into our own cache and the old home L3. - * The finv's are guaranteed not to actually flush the data in - * the buffer back to their home, since we just read it, so the - * lines are clean in cache; we will only invalidate those lines. - */ - p = (char *)buffer + size - 1; - __insn_finv(p); - p -= step_size; - p = (char *)((unsigned long)p | (step_size - 1)); - for (; p >= base; p -= step_size) - __insn_finv(p); - - /* Wait for these finv's (and thus the first finvs) to be done. */ - __insn_mf(); - -#ifdef __tilegx__ - /* Reenable the prefetcher. */ - __insn_mtspr(SPR_DSTREAM_PF, old_dstream_pf); -#endif -} -EXPORT_SYMBOL_GPL(finv_buffer_remote); diff --git a/arch/tile/lib/checksum.c b/arch/tile/lib/checksum.c deleted file mode 100644 index c3ca3e64d9d9..000000000000 --- a/arch/tile/lib/checksum.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * Support code for the main lib/checksum.c. - */ - -#include <net/checksum.h> -#include <linux/module.h> - -__wsum do_csum(const unsigned char *buff, int len) -{ - int odd, count; - unsigned long result = 0; - - if (len <= 0) - goto out; - odd = 1 & (unsigned long) buff; - if (odd) { - result = (*buff << 8); - len--; - buff++; - } - count = len >> 1; /* nr of 16-bit words.. */ - if (count) { - if (2 & (unsigned long) buff) { - result += *(const unsigned short *)buff; - count--; - len -= 2; - buff += 2; - } - count >>= 1; /* nr of 32-bit words.. */ - if (count) { -#ifdef __tilegx__ - if (4 & (unsigned long) buff) { - unsigned int w = *(const unsigned int *)buff; - result = __insn_v2sadau(result, w, 0); - count--; - len -= 4; - buff += 4; - } - count >>= 1; /* nr of 64-bit words.. */ -#endif - - /* - * This algorithm could wrap around for very - * large buffers, but those should be impossible. - */ - BUG_ON(count >= 65530); - - while (count) { - unsigned long w = *(const unsigned long *)buff; - count--; - buff += sizeof(w); -#ifdef __tilegx__ - result = __insn_v2sadau(result, w, 0); -#else - result = __insn_sadah_u(result, w, 0); -#endif - } -#ifdef __tilegx__ - if (len & 4) { - unsigned int w = *(const unsigned int *)buff; - result = __insn_v2sadau(result, w, 0); - buff += 4; - } -#endif - } - if (len & 2) { - result += *(const unsigned short *) buff; - buff += 2; - } - } - if (len & 1) - result += *buff; - result = csum_long(result); - if (odd) - result = swab16(result); -out: - return result; -} diff --git a/arch/tile/lib/cpumask.c b/arch/tile/lib/cpumask.c deleted file mode 100644 index 75947edccb26..000000000000 --- a/arch/tile/lib/cpumask.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/cpumask.h> -#include <linux/ctype.h> -#include <linux/errno.h> -#include <linux/smp.h> -#include <linux/export.h> - -/* - * Allow cropping out bits beyond the end of the array. - * Move to "lib" directory if more clients want to use this routine. - */ -int bitmap_parselist_crop(const char *bp, unsigned long *maskp, int nmaskbits) -{ - unsigned a, b; - - bitmap_zero(maskp, nmaskbits); - do { - if (!isdigit(*bp)) - return -EINVAL; - a = simple_strtoul(bp, (char **)&bp, 10); - b = a; - if (*bp == '-') { - bp++; - if (!isdigit(*bp)) - return -EINVAL; - b = simple_strtoul(bp, (char **)&bp, 10); - } - if (!(a <= b)) - return -EINVAL; - if (b >= nmaskbits) - b = nmaskbits-1; - while (a <= b) { - set_bit(a, maskp); - a++; - } - if (*bp == ',') - bp++; - } while (*bp != '\0' && *bp != '\n'); - return 0; -} -EXPORT_SYMBOL(bitmap_parselist_crop); diff --git a/arch/tile/lib/delay.c b/arch/tile/lib/delay.c deleted file mode 100644 index cdacdd11d360..000000000000 --- a/arch/tile/lib/delay.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/thread_info.h> -#include <asm/timex.h> - -void __udelay(unsigned long usecs) -{ - if (usecs > ULONG_MAX / 1000) { - WARN_ON_ONCE(usecs > ULONG_MAX / 1000); - usecs = ULONG_MAX / 1000; - } - __ndelay(usecs * 1000); -} -EXPORT_SYMBOL(__udelay); - -void __ndelay(unsigned long nsecs) -{ - cycles_t target = get_cycles(); - target += ns2cycles(nsecs); - while (get_cycles() < target) - cpu_relax(); -} -EXPORT_SYMBOL(__ndelay); - -void __delay(unsigned long cycles) -{ - cycles_t target = get_cycles() + cycles; - while (get_cycles() < target) - cpu_relax(); -} -EXPORT_SYMBOL(__delay); diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c deleted file mode 100644 index ecce8e177e3f..000000000000 --- a/arch/tile/lib/exports.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Exports from assembler code and from libtile-cc. - */ - -#include <linux/module.h> - -/* arch/tile/lib/usercopy.S */ -#include <linux/uaccess.h> -EXPORT_SYMBOL(clear_user_asm); -EXPORT_SYMBOL(flush_user_asm); -EXPORT_SYMBOL(finv_user_asm); - -/* arch/tile/kernel/entry.S */ -#include <linux/kernel.h> -#include <asm/processor.h> -EXPORT_SYMBOL(current_text_addr); - -/* arch/tile/kernel/head.S */ -EXPORT_SYMBOL(empty_zero_page); - -#ifdef CONFIG_FUNCTION_TRACER -/* arch/tile/kernel/mcount_64.S */ -#include <asm/ftrace.h> -EXPORT_SYMBOL(__mcount); -#endif /* CONFIG_FUNCTION_TRACER */ - -/* arch/tile/lib/, various memcpy files */ -EXPORT_SYMBOL(memcpy); -EXPORT_SYMBOL(raw_copy_to_user); -EXPORT_SYMBOL(raw_copy_from_user); -#ifdef __tilegx__ -EXPORT_SYMBOL(raw_copy_in_user); -#endif - -/* hypervisor glue */ -#include <hv/hypervisor.h> -EXPORT_SYMBOL(hv_dev_open); -EXPORT_SYMBOL(hv_dev_pread); -EXPORT_SYMBOL(hv_dev_pwrite); -EXPORT_SYMBOL(hv_dev_preada); -EXPORT_SYMBOL(hv_dev_pwritea); -EXPORT_SYMBOL(hv_dev_poll); -EXPORT_SYMBOL(hv_dev_poll_cancel); -EXPORT_SYMBOL(hv_dev_close); -EXPORT_SYMBOL(hv_sysconf); -EXPORT_SYMBOL(hv_confstr); -EXPORT_SYMBOL(hv_get_rtc); -EXPORT_SYMBOL(hv_set_rtc); - -/* libgcc.a */ -uint32_t __udivsi3(uint32_t dividend, uint32_t divisor); -EXPORT_SYMBOL(__udivsi3); -int32_t __divsi3(int32_t dividend, int32_t divisor); -EXPORT_SYMBOL(__divsi3); -uint64_t __udivdi3(uint64_t dividend, uint64_t divisor); -EXPORT_SYMBOL(__udivdi3); -int64_t __divdi3(int64_t dividend, int64_t divisor); -EXPORT_SYMBOL(__divdi3); -uint32_t __umodsi3(uint32_t dividend, uint32_t divisor); -EXPORT_SYMBOL(__umodsi3); -int32_t __modsi3(int32_t dividend, int32_t divisor); -EXPORT_SYMBOL(__modsi3); -uint64_t __umoddi3(uint64_t dividend, uint64_t divisor); -EXPORT_SYMBOL(__umoddi3); -int64_t __moddi3(int64_t dividend, int64_t divisor); -EXPORT_SYMBOL(__moddi3); -#ifdef __tilegx__ -typedef int TItype __attribute__((mode(TI))); -TItype __multi3(TItype a, TItype b); -EXPORT_SYMBOL(__multi3); /* required for gcc 7 and later */ -#else -int64_t __muldi3(int64_t, int64_t); -EXPORT_SYMBOL(__muldi3); -uint64_t __lshrdi3(uint64_t, unsigned int); -EXPORT_SYMBOL(__lshrdi3); -uint64_t __ashrdi3(uint64_t, unsigned int); -EXPORT_SYMBOL(__ashrdi3); -uint64_t __ashldi3(uint64_t, unsigned int); -EXPORT_SYMBOL(__ashldi3); -int __ffsdi2(uint64_t); -EXPORT_SYMBOL(__ffsdi2); -#endif diff --git a/arch/tile/lib/memchr_32.c b/arch/tile/lib/memchr_32.c deleted file mode 100644 index cc3d9badf030..000000000000 --- a/arch/tile/lib/memchr_32.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <linux/module.h> - -void *memchr(const void *s, int c, size_t n) -{ - const uint32_t *last_word_ptr; - const uint32_t *p; - const char *last_byte_ptr; - uintptr_t s_int; - uint32_t goal, before_mask, v, bits; - char *ret; - - if (__builtin_expect(n == 0, 0)) { - /* Don't dereference any memory if the array is empty. */ - return NULL; - } - - /* Get an aligned pointer. */ - s_int = (uintptr_t) s; - p = (const uint32_t *)(s_int & -4); - - /* Create four copies of the byte for which we are looking. */ - goal = 0x01010101 * (uint8_t) c; - - /* Read the first word, but munge it so that bytes before the array - * will not match goal. - * - * Note that this shift count expression works because we know - * shift counts are taken mod 32. - */ - before_mask = (1 << (s_int << 3)) - 1; - v = (*p | before_mask) ^ (goal & before_mask); - - /* Compute the address of the last byte. */ - last_byte_ptr = (const char *)s + n - 1; - - /* Compute the address of the word containing the last byte. */ - last_word_ptr = (const uint32_t *)((uintptr_t) last_byte_ptr & -4); - - while ((bits = __insn_seqb(v, goal)) == 0) { - if (__builtin_expect(p == last_word_ptr, 0)) { - /* We already read the last word in the array, - * so give up. - */ - return NULL; - } - v = *++p; - } - - /* We found a match, but it might be in a byte past the end - * of the array. - */ - ret = ((char *)p) + (__insn_ctz(bits) >> 3); - return (ret <= last_byte_ptr) ? ret : NULL; -} -EXPORT_SYMBOL(memchr); diff --git a/arch/tile/lib/memchr_64.c b/arch/tile/lib/memchr_64.c deleted file mode 100644 index f8196b3a950e..000000000000 --- a/arch/tile/lib/memchr_64.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <linux/module.h> -#include "string-endian.h" - -void *memchr(const void *s, int c, size_t n) -{ - const uint64_t *last_word_ptr; - const uint64_t *p; - const char *last_byte_ptr; - uintptr_t s_int; - uint64_t goal, before_mask, v, bits; - char *ret; - - if (__builtin_expect(n == 0, 0)) { - /* Don't dereference any memory if the array is empty. */ - return NULL; - } - - /* Get an aligned pointer. */ - s_int = (uintptr_t) s; - p = (const uint64_t *)(s_int & -8); - - /* Create eight copies of the byte for which we are looking. */ - goal = copy_byte(c); - - /* Read the first word, but munge it so that bytes before the array - * will not match goal. - */ - before_mask = MASK(s_int); - v = (*p | before_mask) ^ (goal & before_mask); - - /* Compute the address of the last byte. */ - last_byte_ptr = (const char *)s + n - 1; - - /* Compute the address of the word containing the last byte. */ - last_word_ptr = (const uint64_t *)((uintptr_t) last_byte_ptr & -8); - - while ((bits = __insn_v1cmpeq(v, goal)) == 0) { - if (__builtin_expect(p == last_word_ptr, 0)) { - /* We already read the last word in the array, - * so give up. - */ - return NULL; - } - v = *++p; - } - - /* We found a match, but it might be in a byte past the end - * of the array. - */ - ret = ((char *)p) + (CFZ(bits) >> 3); - return (ret <= last_byte_ptr) ? ret : NULL; -} -EXPORT_SYMBOL(memchr); diff --git a/arch/tile/lib/memcpy_32.S b/arch/tile/lib/memcpy_32.S deleted file mode 100644 index 270f1267cd18..000000000000 --- a/arch/tile/lib/memcpy_32.S +++ /dev/null @@ -1,544 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <arch/chip.h> - - -/* - * This file shares the implementation of the userspace memcpy and - * the kernel's memcpy, copy_to_user and copy_from_user. - */ - -#include <linux/linkage.h> - -#define IS_MEMCPY 0 -#define IS_COPY_FROM_USER 1 -#define IS_COPY_TO_USER -1 - - .section .text.memcpy_common, "ax" - .align 64 - -/* Use this to preface each bundle that can cause an exception so - * the kernel can clean up properly. The special cleanup code should - * not use these, since it knows what it is doing. - */ -#define EX \ - .pushsection __ex_table, "a"; \ - .align 4; \ - .word 9f, memcpy_common_fixup; \ - .popsection; \ - 9 - - -/* raw_copy_from_user takes the kernel target address in r0, - * the user source in r1, and the bytes to copy in r2. - * It returns the number of uncopiable bytes (hopefully zero) in r0. - */ -ENTRY(raw_copy_from_user) -.type raw_copy_from_user, @function - FEEDBACK_ENTER_EXPLICIT(raw_copy_from_user, \ - .text.memcpy_common, \ - .Lend_memcpy_common - raw_copy_from_user) - { movei r29, IS_COPY_FROM_USER; j memcpy_common } - .size raw_copy_from_user, . - raw_copy_from_user - -/* raw_copy_to_user takes the user target address in r0, - * the kernel source in r1, and the bytes to copy in r2. - * It returns the number of uncopiable bytes (hopefully zero) in r0. - */ -ENTRY(raw_copy_to_user) -.type raw_copy_to_user, @function - FEEDBACK_REENTER(raw_copy_from_user) - { movei r29, IS_COPY_TO_USER; j memcpy_common } - .size raw_copy_to_user, . - raw_copy_to_user - -ENTRY(memcpy) -.type memcpy, @function - FEEDBACK_REENTER(raw_copy_from_user) - { movei r29, IS_MEMCPY } - .size memcpy, . - memcpy - /* Fall through */ - - .type memcpy_common, @function -memcpy_common: - /* On entry, r29 holds one of the IS_* macro values from above. */ - - - /* r0 is the dest, r1 is the source, r2 is the size. */ - - /* Save aside original dest so we can return it at the end. */ - { sw sp, lr; move r23, r0; or r4, r0, r1 } - - /* Check for an empty size. */ - { bz r2, .Ldone; andi r4, r4, 3 } - - /* Save aside original values in case of a fault. */ - { move r24, r1; move r25, r2 } - move r27, lr - - /* Check for an unaligned source or dest. */ - { bnz r4, .Lcopy_unaligned_maybe_many; addli r4, r2, -256 } - -.Lcheck_aligned_copy_size: - /* If we are copying < 256 bytes, branch to simple case. */ - { blzt r4, .Lcopy_8_check; slti_u r8, r2, 8 } - - /* Copying >= 256 bytes, so jump to complex prefetching loop. */ - { andi r6, r1, 63; j .Lcopy_many } - -/* - * - * Aligned 4 byte at a time copy loop - * - */ - -.Lcopy_8_loop: - /* Copy two words at a time to hide load latency. */ -EX: { lw r3, r1; addi r1, r1, 4; slti_u r8, r2, 16 } -EX: { lw r4, r1; addi r1, r1, 4 } -EX: { sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 } -EX: { sw r0, r4; addi r0, r0, 4; addi r2, r2, -4 } -.Lcopy_8_check: - { bzt r8, .Lcopy_8_loop; slti_u r4, r2, 4 } - - /* Copy odd leftover word, if any. */ - { bnzt r4, .Lcheck_odd_stragglers } -EX: { lw r3, r1; addi r1, r1, 4 } -EX: { sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 } - -.Lcheck_odd_stragglers: - { bnz r2, .Lcopy_unaligned_few } - -.Ldone: - /* For memcpy return original dest address, else zero. */ - { mz r0, r29, r23; jrp lr } - - -/* - * - * Prefetching multiple cache line copy handler (for large transfers). - * - */ - - /* Copy words until r1 is cache-line-aligned. */ -.Lalign_loop: -EX: { lw r3, r1; addi r1, r1, 4 } - { andi r6, r1, 63 } -EX: { sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 } -.Lcopy_many: - { bnzt r6, .Lalign_loop; addi r9, r0, 63 } - - { addi r3, r1, 60; andi r9, r9, -64 } - - /* No need to prefetch dst, we'll just do the wh64 - * right before we copy a line. - */ -EX: { lw r5, r3; addi r3, r3, 64; movei r4, 1 } - /* Intentionally stall for a few cycles to leave L2 cache alone. */ - { bnzt zero, .; move r27, lr } -EX: { lw r6, r3; addi r3, r3, 64 } - /* Intentionally stall for a few cycles to leave L2 cache alone. */ - { bnzt zero, . } -EX: { lw r7, r3; addi r3, r3, 64 } - /* Intentionally stall for a few cycles to leave L2 cache alone. */ - { bz zero, .Lbig_loop2 } - - /* On entry to this loop: - * - r0 points to the start of dst line 0 - * - r1 points to start of src line 0 - * - r2 >= (256 - 60), only the first time the loop trips. - * - r3 contains r1 + 128 + 60 [pointer to end of source line 2] - * This is our prefetch address. When we get near the end - * rather than prefetching off the end this is changed to point - * to some "safe" recently loaded address. - * - r5 contains *(r1 + 60) [i.e. last word of source line 0] - * - r6 contains *(r1 + 64 + 60) [i.e. last word of source line 1] - * - r9 contains ((r0 + 63) & -64) - * [start of next dst cache line.] - */ - -.Lbig_loop: - { jal .Lcopy_line2; add r15, r1, r2 } - -.Lbig_loop2: - /* Copy line 0, first stalling until r5 is ready. */ -EX: { move r12, r5; lw r16, r1 } - { bz r4, .Lcopy_8_check; slti_u r8, r2, 8 } - /* Prefetch several lines ahead. */ -EX: { lw r5, r3; addi r3, r3, 64 } - { jal .Lcopy_line } - - /* Copy line 1, first stalling until r6 is ready. */ -EX: { move r12, r6; lw r16, r1 } - { bz r4, .Lcopy_8_check; slti_u r8, r2, 8 } - /* Prefetch several lines ahead. */ -EX: { lw r6, r3; addi r3, r3, 64 } - { jal .Lcopy_line } - - /* Copy line 2, first stalling until r7 is ready. */ -EX: { move r12, r7; lw r16, r1 } - { bz r4, .Lcopy_8_check; slti_u r8, r2, 8 } - /* Prefetch several lines ahead. */ -EX: { lw r7, r3; addi r3, r3, 64 } - /* Use up a caches-busy cycle by jumping back to the top of the - * loop. Might as well get it out of the way now. - */ - { j .Lbig_loop } - - - /* On entry: - * - r0 points to the destination line. - * - r1 points to the source line. - * - r3 is the next prefetch address. - * - r9 holds the last address used for wh64. - * - r12 = WORD_15 - * - r16 = WORD_0. - * - r17 == r1 + 16. - * - r27 holds saved lr to restore. - * - * On exit: - * - r0 is incremented by 64. - * - r1 is incremented by 64, unless that would point to a word - * beyond the end of the source array, in which case it is redirected - * to point to an arbitrary word already in the cache. - * - r2 is decremented by 64. - * - r3 is unchanged, unless it points to a word beyond the - * end of the source array, in which case it is redirected - * to point to an arbitrary word already in the cache. - * Redirecting is OK since if we are that close to the end - * of the array we will not come back to this subroutine - * and use the contents of the prefetched address. - * - r4 is nonzero iff r2 >= 64. - * - r9 is incremented by 64, unless it points beyond the - * end of the last full destination cache line, in which - * case it is redirected to a "safe address" that can be - * clobbered (sp - 64) - * - lr contains the value in r27. - */ - -/* r26 unused */ - -.Lcopy_line: - /* TODO: when r3 goes past the end, we would like to redirect it - * to prefetch the last partial cache line (if any) just once, for the - * benefit of the final cleanup loop. But we don't want to - * prefetch that line more than once, or subsequent prefetches - * will go into the RTF. But then .Lbig_loop should unconditionally - * branch to top of loop to execute final prefetch, and its - * nop should become a conditional branch. - */ - - /* We need two non-memory cycles here to cover the resources - * used by the loads initiated by the caller. - */ - { add r15, r1, r2 } -.Lcopy_line2: - { slt_u r13, r3, r15; addi r17, r1, 16 } - - /* NOTE: this will stall for one cycle as L1 is busy. */ - - /* Fill second L1D line. */ -EX: { lw r17, r17; addi r1, r1, 48; mvz r3, r13, r1 } /* r17 = WORD_4 */ - - /* Prepare destination line for writing. */ -EX: { wh64 r9; addi r9, r9, 64 } - /* Load seven words that are L1D hits to cover wh64 L2 usage. */ - - /* Load the three remaining words from the last L1D line, which - * we know has already filled the L1D. - */ -EX: { lw r4, r1; addi r1, r1, 4; addi r20, r1, 16 } /* r4 = WORD_12 */ -EX: { lw r8, r1; addi r1, r1, 4; slt_u r13, r20, r15 }/* r8 = WORD_13 */ -EX: { lw r11, r1; addi r1, r1, -52; mvz r20, r13, r1 } /* r11 = WORD_14 */ - - /* Load the three remaining words from the first L1D line, first - * stalling until it has filled by "looking at" r16. - */ -EX: { lw r13, r1; addi r1, r1, 4; move zero, r16 } /* r13 = WORD_1 */ -EX: { lw r14, r1; addi r1, r1, 4 } /* r14 = WORD_2 */ -EX: { lw r15, r1; addi r1, r1, 8; addi r10, r0, 60 } /* r15 = WORD_3 */ - - /* Load second word from the second L1D line, first - * stalling until it has filled by "looking at" r17. - */ -EX: { lw r19, r1; addi r1, r1, 4; move zero, r17 } /* r19 = WORD_5 */ - - /* Store last word to the destination line, potentially dirtying it - * for the first time, which keeps the L2 busy for two cycles. - */ -EX: { sw r10, r12 } /* store(WORD_15) */ - - /* Use two L1D hits to cover the sw L2 access above. */ -EX: { lw r10, r1; addi r1, r1, 4 } /* r10 = WORD_6 */ -EX: { lw r12, r1; addi r1, r1, 4 } /* r12 = WORD_7 */ - - /* Fill third L1D line. */ -EX: { lw r18, r1; addi r1, r1, 4 } /* r18 = WORD_8 */ - - /* Store first L1D line. */ -EX: { sw r0, r16; addi r0, r0, 4; add r16, r0, r2 } /* store(WORD_0) */ -EX: { sw r0, r13; addi r0, r0, 4; andi r16, r16, -64 } /* store(WORD_1) */ -EX: { sw r0, r14; addi r0, r0, 4; slt_u r16, r9, r16 } /* store(WORD_2) */ -EX: { sw r0, r15; addi r0, r0, 4; addi r13, sp, -64 } /* store(WORD_3) */ - /* Store second L1D line. */ -EX: { sw r0, r17; addi r0, r0, 4; mvz r9, r16, r13 }/* store(WORD_4) */ -EX: { sw r0, r19; addi r0, r0, 4 } /* store(WORD_5) */ -EX: { sw r0, r10; addi r0, r0, 4 } /* store(WORD_6) */ -EX: { sw r0, r12; addi r0, r0, 4 } /* store(WORD_7) */ - -EX: { lw r13, r1; addi r1, r1, 4; move zero, r18 } /* r13 = WORD_9 */ -EX: { lw r14, r1; addi r1, r1, 4 } /* r14 = WORD_10 */ -EX: { lw r15, r1; move r1, r20 } /* r15 = WORD_11 */ - - /* Store third L1D line. */ -EX: { sw r0, r18; addi r0, r0, 4 } /* store(WORD_8) */ -EX: { sw r0, r13; addi r0, r0, 4 } /* store(WORD_9) */ -EX: { sw r0, r14; addi r0, r0, 4 } /* store(WORD_10) */ -EX: { sw r0, r15; addi r0, r0, 4 } /* store(WORD_11) */ - - /* Store rest of fourth L1D line. */ -EX: { sw r0, r4; addi r0, r0, 4 } /* store(WORD_12) */ - { -EX: sw r0, r8 /* store(WORD_13) */ - addi r0, r0, 4 - /* Will r2 be > 64 after we subtract 64 below? */ - shri r4, r2, 7 - } - { -EX: sw r0, r11 /* store(WORD_14) */ - addi r0, r0, 8 - /* Record 64 bytes successfully copied. */ - addi r2, r2, -64 - } - - { jrp lr; move lr, r27 } - - /* Convey to the backtrace library that the stack frame is size - * zero, and the real return address is on the stack rather than - * in 'lr'. - */ - { info 8 } - - .align 64 -.Lcopy_unaligned_maybe_many: - /* Skip the setup overhead if we aren't copying many bytes. */ - { slti_u r8, r2, 20; sub r4, zero, r0 } - { bnzt r8, .Lcopy_unaligned_few; andi r4, r4, 3 } - { bz r4, .Ldest_is_word_aligned; add r18, r1, r2 } - -/* - * - * unaligned 4 byte at a time copy handler. - * - */ - - /* Copy single bytes until r0 == 0 mod 4, so we can store words. */ -.Lalign_dest_loop: -EX: { lb_u r3, r1; addi r1, r1, 1; addi r4, r4, -1 } -EX: { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 } - { bnzt r4, .Lalign_dest_loop; andi r3, r1, 3 } - - /* If source and dest are now *both* aligned, do an aligned copy. */ - { bz r3, .Lcheck_aligned_copy_size; addli r4, r2, -256 } - -.Ldest_is_word_aligned: - -EX: { andi r8, r0, 63; lwadd_na r6, r1, 4} - { slti_u r9, r2, 64; bz r8, .Ldest_is_L2_line_aligned } - - /* This copies unaligned words until either there are fewer - * than 4 bytes left to copy, or until the destination pointer - * is cache-aligned, whichever comes first. - * - * On entry: - * - r0 is the next store address. - * - r1 points 4 bytes past the load address corresponding to r0. - * - r2 >= 4 - * - r6 is the next aligned word loaded. - */ -.Lcopy_unaligned_src_words: -EX: { lwadd_na r7, r1, 4; slti_u r8, r2, 4 + 4 } - /* stall */ - { dword_align r6, r7, r1; slti_u r9, r2, 64 + 4 } -EX: { swadd r0, r6, 4; addi r2, r2, -4 } - { bnz r8, .Lcleanup_unaligned_words; andi r8, r0, 63 } - { bnzt r8, .Lcopy_unaligned_src_words; move r6, r7 } - - /* On entry: - * - r0 is the next store address. - * - r1 points 4 bytes past the load address corresponding to r0. - * - r2 >= 4 (# of bytes left to store). - * - r6 is the next aligned src word value. - * - r9 = (r2 < 64U). - * - r18 points one byte past the end of source memory. - */ -.Ldest_is_L2_line_aligned: - - { - /* Not a full cache line remains. */ - bnz r9, .Lcleanup_unaligned_words - move r7, r6 - } - - /* r2 >= 64 */ - - /* Kick off two prefetches, but don't go past the end. */ - { addi r3, r1, 63 - 4; addi r8, r1, 64 + 63 - 4 } - { prefetch r3; move r3, r8; slt_u r8, r8, r18 } - { mvz r3, r8, r1; addi r8, r3, 64 } - { prefetch r3; move r3, r8; slt_u r8, r8, r18 } - { mvz r3, r8, r1; movei r17, 0 } - -.Lcopy_unaligned_line: - /* Prefetch another line. */ - { prefetch r3; addi r15, r1, 60; addi r3, r3, 64 } - /* Fire off a load of the last word we are about to copy. */ -EX: { lw_na r15, r15; slt_u r8, r3, r18 } - -EX: { mvz r3, r8, r1; wh64 r0 } - - /* This loop runs twice. - * - * On entry: - * - r17 is even before the first iteration, and odd before - * the second. It is incremented inside the loop. Encountering - * an even value at the end of the loop makes it stop. - */ -.Lcopy_half_an_unaligned_line: -EX: { - /* Stall until the last byte is ready. In the steady state this - * guarantees all words to load below will be in the L2 cache, which - * avoids shunting the loads to the RTF. - */ - move zero, r15 - lwadd_na r7, r1, 16 - } -EX: { lwadd_na r11, r1, 12 } -EX: { lwadd_na r14, r1, -24 } -EX: { lwadd_na r8, r1, 4 } -EX: { lwadd_na r9, r1, 4 } -EX: { - lwadd_na r10, r1, 8 - /* r16 = (r2 < 64), after we subtract 32 from r2 below. */ - slti_u r16, r2, 64 + 32 - } -EX: { lwadd_na r12, r1, 4; addi r17, r17, 1 } -EX: { lwadd_na r13, r1, 8; dword_align r6, r7, r1 } -EX: { swadd r0, r6, 4; dword_align r7, r8, r1 } -EX: { swadd r0, r7, 4; dword_align r8, r9, r1 } -EX: { swadd r0, r8, 4; dword_align r9, r10, r1 } -EX: { swadd r0, r9, 4; dword_align r10, r11, r1 } -EX: { swadd r0, r10, 4; dword_align r11, r12, r1 } -EX: { swadd r0, r11, 4; dword_align r12, r13, r1 } -EX: { swadd r0, r12, 4; dword_align r13, r14, r1 } -EX: { swadd r0, r13, 4; addi r2, r2, -32 } - { move r6, r14; bbst r17, .Lcopy_half_an_unaligned_line } - - { bzt r16, .Lcopy_unaligned_line; move r7, r6 } - - /* On entry: - * - r0 is the next store address. - * - r1 points 4 bytes past the load address corresponding to r0. - * - r2 >= 0 (# of bytes left to store). - * - r7 is the next aligned src word value. - */ -.Lcleanup_unaligned_words: - /* Handle any trailing bytes. */ - { bz r2, .Lcopy_unaligned_done; slti_u r8, r2, 4 } - { bzt r8, .Lcopy_unaligned_src_words; move r6, r7 } - - /* Move r1 back to the point where it corresponds to r0. */ - { addi r1, r1, -4 } - - /* Fall through */ - -/* - * - * 1 byte at a time copy handler. - * - */ - -.Lcopy_unaligned_few: -EX: { lb_u r3, r1; addi r1, r1, 1 } -EX: { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 } - { bnzt r2, .Lcopy_unaligned_few } - -.Lcopy_unaligned_done: - - /* For memcpy return original dest address, else zero. */ - { mz r0, r29, r23; jrp lr } - -.Lend_memcpy_common: - .size memcpy_common, .Lend_memcpy_common - memcpy_common - - .section .fixup,"ax" -memcpy_common_fixup: - .type memcpy_common_fixup, @function - - /* Skip any bytes we already successfully copied. - * r2 (num remaining) is correct, but r0 (dst) and r1 (src) - * may not be quite right because of unrolling and prefetching. - * So we need to recompute their values as the address just - * after the last byte we are sure was successfully loaded and - * then stored. - */ - - /* Determine how many bytes we successfully copied. */ - { sub r3, r25, r2 } - - /* Add this to the original r0 and r1 to get their new values. */ - { add r0, r23, r3; add r1, r24, r3 } - - { bzt r29, memcpy_fixup_loop } - { blzt r29, copy_to_user_fixup_loop } - -copy_from_user_fixup_loop: - /* Try copying the rest one byte at a time, expecting a load fault. */ -.Lcfu: { lb_u r3, r1; addi r1, r1, 1 } - { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 } - { bnzt r2, copy_from_user_fixup_loop } - -.Lcopy_from_user_fixup_zero_remainder: - move lr, r27 - { move r0, r2; jrp lr } - -copy_to_user_fixup_loop: - /* Try copying the rest one byte at a time, expecting a store fault. */ - { lb_u r3, r1; addi r1, r1, 1 } -.Lctu: { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 } - { bnzt r2, copy_to_user_fixup_loop } -.Lcopy_to_user_fixup_done: - move lr, r27 - { move r0, r2; jrp lr } - -memcpy_fixup_loop: - /* Try copying the rest one byte at a time. We expect a disastrous - * fault to happen since we are in fixup code, but let it happen. - */ - { lb_u r3, r1; addi r1, r1, 1 } - { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 } - { bnzt r2, memcpy_fixup_loop } - /* This should be unreachable, we should have faulted again. - * But be paranoid and handle it in case some interrupt changed - * the TLB or something. - */ - move lr, r27 - { move r0, r23; jrp lr } - - .size memcpy_common_fixup, . - memcpy_common_fixup - - .section __ex_table,"a" - .align 4 - .word .Lcfu, .Lcopy_from_user_fixup_zero_remainder - .word .Lctu, .Lcopy_to_user_fixup_done diff --git a/arch/tile/lib/memcpy_64.c b/arch/tile/lib/memcpy_64.c deleted file mode 100644 index 4815354b8cd2..000000000000 --- a/arch/tile/lib/memcpy_64.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <linux/module.h> -/* EXPORT_SYMBOL() is in arch/tile/lib/exports.c since this should be asm. */ - -/* Must be 8 bytes in size. */ -#define op_t uint64_t - -/* Threshold value for when to enter the unrolled loops. */ -#define OP_T_THRES 16 - -#if CHIP_L2_LINE_SIZE() != 64 -#error "Assumes 64 byte line size" -#endif - -/* How many cache lines ahead should we prefetch? */ -#define PREFETCH_LINES_AHEAD 4 - -/* - * Provide "base versions" of load and store for the normal code path. - * The kernel provides other versions for userspace copies. - */ -#define ST(p, v) (*(p) = (v)) -#define LD(p) (*(p)) - -#ifndef USERCOPY_FUNC -#define ST1 ST -#define ST2 ST -#define ST4 ST -#define ST8 ST -#define LD1 LD -#define LD2 LD -#define LD4 LD -#define LD8 LD -#define RETVAL dstv -void *memcpy(void *__restrict dstv, const void *__restrict srcv, size_t n) -#else -/* - * Special kernel version will provide implementation of the LDn/STn - * macros to return a count of uncopied bytes due to mm fault. - */ -#define RETVAL 0 -int __attribute__((optimize("omit-frame-pointer"))) -USERCOPY_FUNC(void *__restrict dstv, const void *__restrict srcv, size_t n) -#endif -{ - char *__restrict dst1 = (char *)dstv; - const char *__restrict src1 = (const char *)srcv; - const char *__restrict src1_end; - const char *__restrict prefetch; - op_t *__restrict dst8; /* 8-byte pointer to destination memory. */ - op_t final; /* Final bytes to write to trailing word, if any */ - long i; - - if (n < 16) { - for (; n; n--) - ST1(dst1++, LD1(src1++)); - return RETVAL; - } - - /* - * Locate the end of source memory we will copy. Don't - * prefetch past this. - */ - src1_end = src1 + n - 1; - - /* Prefetch ahead a few cache lines, but not past the end. */ - prefetch = src1; - for (i = 0; i < PREFETCH_LINES_AHEAD; i++) { - __insn_prefetch(prefetch); - prefetch += CHIP_L2_LINE_SIZE(); - prefetch = (prefetch < src1_end) ? prefetch : src1; - } - - /* Copy bytes until dst is word-aligned. */ - for (; (uintptr_t)dst1 & (sizeof(op_t) - 1); n--) - ST1(dst1++, LD1(src1++)); - - /* 8-byte pointer to destination memory. */ - dst8 = (op_t *)dst1; - - if (__builtin_expect((uintptr_t)src1 & (sizeof(op_t) - 1), 0)) { - /* Unaligned copy. */ - - op_t tmp0 = 0, tmp1 = 0, tmp2, tmp3; - const op_t *src8 = (const op_t *) ((uintptr_t)src1 & - -sizeof(op_t)); - const void *srci = (void *)src1; - int m; - - m = (CHIP_L2_LINE_SIZE() << 2) - - (((uintptr_t)dst8) & ((CHIP_L2_LINE_SIZE() << 2) - 1)); - m = (n < m) ? n : m; - m /= sizeof(op_t); - - /* Copy until 'dst' is cache-line-aligned. */ - n -= (sizeof(op_t) * m); - - switch (m % 4) { - case 0: - if (__builtin_expect(!m, 0)) - goto _M0; - tmp1 = LD8(src8++); - tmp2 = LD8(src8++); - goto _8B3; - case 2: - m += 2; - tmp3 = LD8(src8++); - tmp0 = LD8(src8++); - goto _8B1; - case 3: - m += 1; - tmp2 = LD8(src8++); - tmp3 = LD8(src8++); - goto _8B2; - case 1: - m--; - tmp0 = LD8(src8++); - tmp1 = LD8(src8++); - if (__builtin_expect(!m, 0)) - goto _8B0; - } - - do { - tmp2 = LD8(src8++); - tmp0 = __insn_dblalign(tmp0, tmp1, srci); - ST8(dst8++, tmp0); -_8B3: - tmp3 = LD8(src8++); - tmp1 = __insn_dblalign(tmp1, tmp2, srci); - ST8(dst8++, tmp1); -_8B2: - tmp0 = LD8(src8++); - tmp2 = __insn_dblalign(tmp2, tmp3, srci); - ST8(dst8++, tmp2); -_8B1: - tmp1 = LD8(src8++); - tmp3 = __insn_dblalign(tmp3, tmp0, srci); - ST8(dst8++, tmp3); - m -= 4; - } while (m); - -_8B0: - tmp0 = __insn_dblalign(tmp0, tmp1, srci); - ST8(dst8++, tmp0); - src8--; - -_M0: - if (__builtin_expect(n >= CHIP_L2_LINE_SIZE(), 0)) { - op_t tmp4, tmp5, tmp6, tmp7, tmp8; - - prefetch = ((const char *)src8) + - CHIP_L2_LINE_SIZE() * PREFETCH_LINES_AHEAD; - - for (tmp0 = LD8(src8++); n >= CHIP_L2_LINE_SIZE(); - n -= CHIP_L2_LINE_SIZE()) { - /* Prefetch and advance to next line to - prefetch, but don't go past the end. */ - __insn_prefetch(prefetch); - - /* Make sure prefetch got scheduled - earlier. */ - __asm__ ("" : : : "memory"); - - prefetch += CHIP_L2_LINE_SIZE(); - prefetch = (prefetch < src1_end) ? prefetch : - (const char *) src8; - - tmp1 = LD8(src8++); - tmp2 = LD8(src8++); - tmp3 = LD8(src8++); - tmp4 = LD8(src8++); - tmp5 = LD8(src8++); - tmp6 = LD8(src8++); - tmp7 = LD8(src8++); - tmp8 = LD8(src8++); - - tmp0 = __insn_dblalign(tmp0, tmp1, srci); - tmp1 = __insn_dblalign(tmp1, tmp2, srci); - tmp2 = __insn_dblalign(tmp2, tmp3, srci); - tmp3 = __insn_dblalign(tmp3, tmp4, srci); - tmp4 = __insn_dblalign(tmp4, tmp5, srci); - tmp5 = __insn_dblalign(tmp5, tmp6, srci); - tmp6 = __insn_dblalign(tmp6, tmp7, srci); - tmp7 = __insn_dblalign(tmp7, tmp8, srci); - - __insn_wh64(dst8); - - ST8(dst8++, tmp0); - ST8(dst8++, tmp1); - ST8(dst8++, tmp2); - ST8(dst8++, tmp3); - ST8(dst8++, tmp4); - ST8(dst8++, tmp5); - ST8(dst8++, tmp6); - ST8(dst8++, tmp7); - - tmp0 = tmp8; - } - src8--; - } - - /* Copy the rest 8-byte chunks. */ - if (n >= sizeof(op_t)) { - tmp0 = LD8(src8++); - for (; n >= sizeof(op_t); n -= sizeof(op_t)) { - tmp1 = LD8(src8++); - tmp0 = __insn_dblalign(tmp0, tmp1, srci); - ST8(dst8++, tmp0); - tmp0 = tmp1; - } - src8--; - } - - if (n == 0) - return RETVAL; - - tmp0 = LD8(src8++); - tmp1 = ((const char *)src8 <= src1_end) - ? LD8((op_t *)src8) : 0; - final = __insn_dblalign(tmp0, tmp1, srci); - - } else { - /* Aligned copy. */ - - const op_t *__restrict src8 = (const op_t *)src1; - - /* src8 and dst8 are both word-aligned. */ - if (n >= CHIP_L2_LINE_SIZE()) { - /* Copy until 'dst' is cache-line-aligned. */ - for (; (uintptr_t)dst8 & (CHIP_L2_LINE_SIZE() - 1); - n -= sizeof(op_t)) - ST8(dst8++, LD8(src8++)); - - for (; n >= CHIP_L2_LINE_SIZE(); ) { - op_t tmp0, tmp1, tmp2, tmp3; - op_t tmp4, tmp5, tmp6, tmp7; - - /* - * Prefetch and advance to next line - * to prefetch, but don't go past the - * end. - */ - __insn_prefetch(prefetch); - - /* Make sure prefetch got scheduled - earlier. */ - __asm__ ("" : : : "memory"); - - prefetch += CHIP_L2_LINE_SIZE(); - prefetch = (prefetch < src1_end) ? prefetch : - (const char *)src8; - - /* - * Do all the loads before wh64. This - * is necessary if [src8, src8+7] and - * [dst8, dst8+7] share the same cache - * line and dst8 <= src8, as can be - * the case when called from memmove, - * or with code tested on x86 whose - * memcpy always works with forward - * copies. - */ - tmp0 = LD8(src8++); - tmp1 = LD8(src8++); - tmp2 = LD8(src8++); - tmp3 = LD8(src8++); - tmp4 = LD8(src8++); - tmp5 = LD8(src8++); - tmp6 = LD8(src8++); - tmp7 = LD8(src8++); - - /* wh64 and wait for tmp7 load completion. */ - __asm__ ("move %0, %0; wh64 %1\n" - : : "r"(tmp7), "r"(dst8)); - - ST8(dst8++, tmp0); - ST8(dst8++, tmp1); - ST8(dst8++, tmp2); - ST8(dst8++, tmp3); - ST8(dst8++, tmp4); - ST8(dst8++, tmp5); - ST8(dst8++, tmp6); - ST8(dst8++, tmp7); - - n -= CHIP_L2_LINE_SIZE(); - } -#if CHIP_L2_LINE_SIZE() != 64 -# error "Fix code that assumes particular L2 cache line size." -#endif - } - - for (; n >= sizeof(op_t); n -= sizeof(op_t)) - ST8(dst8++, LD8(src8++)); - - if (__builtin_expect(n == 0, 1)) - return RETVAL; - - final = LD8(src8); - } - - /* n != 0 if we get here. Write out any trailing bytes. */ - dst1 = (char *)dst8; -#ifndef __BIG_ENDIAN__ - if (n & 4) { - ST4((uint32_t *)dst1, final); - dst1 += 4; - final >>= 32; - n &= 3; - } - if (n & 2) { - ST2((uint16_t *)dst1, final); - dst1 += 2; - final >>= 16; - n &= 1; - } - if (n) - ST1((uint8_t *)dst1, final); -#else - if (n & 4) { - ST4((uint32_t *)dst1, final >> 32); - dst1 += 4; - } - else - { - final >>= 32; - } - if (n & 2) { - ST2((uint16_t *)dst1, final >> 16); - dst1 += 2; - } - else - { - final >>= 16; - } - if (n & 1) - ST1((uint8_t *)dst1, final >> 8); -#endif - - return RETVAL; -} - -#ifdef USERCOPY_FUNC -#undef ST1 -#undef ST2 -#undef ST4 -#undef ST8 -#undef LD1 -#undef LD2 -#undef LD4 -#undef LD8 -#undef USERCOPY_FUNC -#endif diff --git a/arch/tile/lib/memcpy_user_64.c b/arch/tile/lib/memcpy_user_64.c deleted file mode 100644 index a3fea9fd973e..000000000000 --- a/arch/tile/lib/memcpy_user_64.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Do memcpy(), but trap and return "n" when a load or store faults. - * - * Note: this idiom only works when memcpy() compiles to a leaf function. - * Here leaf function not only means it does not have calls, but also - * requires no stack operations (sp, stack frame pointer) and no - * use of callee-saved registers, else "jrp lr" will be incorrect since - * unwinding stack frame is bypassed. Since memcpy() is not complex so - * these conditions are satisfied here, but we need to be careful when - * modifying this file. This is not a clean solution but is the best - * one so far. - * - * Also note that we are capturing "n" from the containing scope here. - */ - -#define _ST(p, inst, v) \ - ({ \ - asm("1: " #inst " %0, %1;" \ - ".pushsection .coldtext,\"ax\";" \ - "2: { move r0, %2; jrp lr };" \ - ".section __ex_table,\"a\";" \ - ".align 8;" \ - ".quad 1b, 2b;" \ - ".popsection" \ - : "=m" (*(p)) : "r" (v), "r" (n)); \ - }) - -#define _LD(p, inst) \ - ({ \ - unsigned long __v; \ - asm("1: " #inst " %0, %1;" \ - ".pushsection .coldtext,\"ax\";" \ - "2: { move r0, %2; jrp lr };" \ - ".section __ex_table,\"a\";" \ - ".align 8;" \ - ".quad 1b, 2b;" \ - ".popsection" \ - : "=r" (__v) : "m" (*(p)), "r" (n)); \ - __v; \ - }) - -#define USERCOPY_FUNC raw_copy_to_user -#define ST1(p, v) _ST((p), st1, (v)) -#define ST2(p, v) _ST((p), st2, (v)) -#define ST4(p, v) _ST((p), st4, (v)) -#define ST8(p, v) _ST((p), st, (v)) -#define LD1 LD -#define LD2 LD -#define LD4 LD -#define LD8 LD -#include "memcpy_64.c" - -#define USERCOPY_FUNC raw_copy_from_user -#define ST1 ST -#define ST2 ST -#define ST4 ST -#define ST8 ST -#define LD1(p) _LD((p), ld1u) -#define LD2(p) _LD((p), ld2u) -#define LD4(p) _LD((p), ld4u) -#define LD8(p) _LD((p), ld) -#include "memcpy_64.c" - -#define USERCOPY_FUNC raw_copy_in_user -#define ST1(p, v) _ST((p), st1, (v)) -#define ST2(p, v) _ST((p), st2, (v)) -#define ST4(p, v) _ST((p), st4, (v)) -#define ST8(p, v) _ST((p), st, (v)) -#define LD1(p) _LD((p), ld1u) -#define LD2(p) _LD((p), ld2u) -#define LD4(p) _LD((p), ld4u) -#define LD8(p) _LD((p), ld) -#include "memcpy_64.c" diff --git a/arch/tile/lib/memmove.c b/arch/tile/lib/memmove.c deleted file mode 100644 index fd615ae6ade7..000000000000 --- a/arch/tile/lib/memmove.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <linux/module.h> - -void *memmove(void *dest, const void *src, size_t n) -{ - if ((const char *)src >= (char *)dest + n - || (char *)dest >= (const char *)src + n) { - /* We found no overlap, so let memcpy do all the heavy - * lifting (prefetching, etc.) - */ - return memcpy(dest, src, n); - } - - if (n != 0) { - const uint8_t *in; - uint8_t x; - uint8_t *out; - int stride; - - if (src < dest) { - /* copy backwards */ - in = (const uint8_t *)src + n - 1; - out = (uint8_t *)dest + n - 1; - stride = -1; - } else { - /* copy forwards */ - in = (const uint8_t *)src; - out = (uint8_t *)dest; - stride = 1; - } - - /* Manually software-pipeline this loop. */ - x = *in; - in += stride; - - while (--n != 0) { - *out = x; - out += stride; - x = *in; - in += stride; - } - - *out = x; - } - - return dest; -} -EXPORT_SYMBOL(memmove); diff --git a/arch/tile/lib/memset_32.c b/arch/tile/lib/memset_32.c deleted file mode 100644 index 2042bfe6595f..000000000000 --- a/arch/tile/lib/memset_32.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <linux/module.h> -#include <arch/chip.h> - -void *memset(void *s, int c, size_t n) -{ - uint32_t *out32; - int n32; - uint32_t v16, v32; - uint8_t *out8 = s; - int to_align32; - - /* Experimentation shows that a trivial tight loop is a win up until - * around a size of 20, where writing a word at a time starts to win. - */ -#define BYTE_CUTOFF 20 - -#if BYTE_CUTOFF < 3 - /* This must be at least at least this big, or some code later - * on doesn't work. - */ -#error "BYTE_CUTOFF is too small" -#endif - - if (n < BYTE_CUTOFF) { - /* Strangely, this turns out to be the tightest way to - * write this loop. - */ - if (n != 0) { - do { - /* Strangely, combining these into one line - * performs worse. - */ - *out8 = c; - out8++; - } while (--n != 0); - } - - return s; - } - - /* Align 'out8'. We know n >= 3 so this won't write past the end. */ - while (((uintptr_t) out8 & 3) != 0) { - *out8++ = c; - --n; - } - - /* Align 'n'. */ - while (n & 3) - out8[--n] = c; - - out32 = (uint32_t *) out8; - n32 = n >> 2; - - /* Tile input byte out to 32 bits. */ - v16 = __insn_intlb(c, c); - v32 = __insn_intlh(v16, v16); - - /* This must be at least 8 or the following loop doesn't work. */ -#define CACHE_LINE_SIZE_IN_WORDS (CHIP_L2_LINE_SIZE() / 4) - - /* Determine how many words we need to emit before the 'out32' - * pointer becomes aligned modulo the cache line size. - */ - to_align32 = - (-((uintptr_t)out32 >> 2)) & (CACHE_LINE_SIZE_IN_WORDS - 1); - - /* Only bother aligning and using wh64 if there is at least - * one full cache line to process. This check also prevents - * overrunning the end of the buffer with alignment words. - */ - if (to_align32 <= n32 - CACHE_LINE_SIZE_IN_WORDS) { - int lines_left; - - /* Align out32 mod the cache line size so we can use wh64. */ - n32 -= to_align32; - for (; to_align32 != 0; to_align32--) { - *out32 = v32; - out32++; - } - - /* Use unsigned divide to turn this into a right shift. */ - lines_left = (unsigned)n32 / CACHE_LINE_SIZE_IN_WORDS; - - do { - /* Only wh64 a few lines at a time, so we don't - * exceed the maximum number of victim lines. - */ - int x = ((lines_left < CHIP_MAX_OUTSTANDING_VICTIMS()) - ? lines_left - : CHIP_MAX_OUTSTANDING_VICTIMS()); - uint32_t *wh = out32; - int i = x; - int j; - - lines_left -= x; - - do { - __insn_wh64(wh); - wh += CACHE_LINE_SIZE_IN_WORDS; - } while (--i); - - for (j = x * (CACHE_LINE_SIZE_IN_WORDS / 4); - j != 0; j--) { - *out32++ = v32; - *out32++ = v32; - *out32++ = v32; - *out32++ = v32; - } - } while (lines_left != 0); - - /* We processed all full lines above, so only this many - * words remain to be processed. - */ - n32 &= CACHE_LINE_SIZE_IN_WORDS - 1; - } - - /* Now handle any leftover values. */ - if (n32 != 0) { - do { - *out32 = v32; - out32++; - } while (--n32 != 0); - } - - return s; -} -EXPORT_SYMBOL(memset); diff --git a/arch/tile/lib/memset_64.c b/arch/tile/lib/memset_64.c deleted file mode 100644 index 03ef69cd73de..000000000000 --- a/arch/tile/lib/memset_64.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <linux/module.h> -#include <arch/chip.h> -#include "string-endian.h" - -void *memset(void *s, int c, size_t n) -{ - uint64_t *out64; - int n64, to_align64; - uint64_t v64; - uint8_t *out8 = s; - - /* Experimentation shows that a trivial tight loop is a win up until - * around a size of 20, where writing a word at a time starts to win. - */ -#define BYTE_CUTOFF 20 - -#if BYTE_CUTOFF < 7 - /* This must be at least at least this big, or some code later - * on doesn't work. - */ -#error "BYTE_CUTOFF is too small" -#endif - - if (n < BYTE_CUTOFF) { - /* Strangely, this turns out to be the tightest way to - * write this loop. - */ - if (n != 0) { - do { - /* Strangely, combining these into one line - * performs worse. - */ - *out8 = c; - out8++; - } while (--n != 0); - } - - return s; - } - - /* Align 'out8'. We know n >= 7 so this won't write past the end. */ - while (((uintptr_t) out8 & 7) != 0) { - *out8++ = c; - --n; - } - - /* Align 'n'. */ - while (n & 7) - out8[--n] = c; - - out64 = (uint64_t *) out8; - n64 = n >> 3; - - /* Tile input byte out to 64 bits. */ - v64 = copy_byte(c); - - /* This must be at least 8 or the following loop doesn't work. */ -#define CACHE_LINE_SIZE_IN_DOUBLEWORDS (CHIP_L2_LINE_SIZE() / 8) - - /* Determine how many words we need to emit before the 'out32' - * pointer becomes aligned modulo the cache line size. - */ - to_align64 = (-((uintptr_t)out64 >> 3)) & - (CACHE_LINE_SIZE_IN_DOUBLEWORDS - 1); - - /* Only bother aligning and using wh64 if there is at least - * one full cache line to process. This check also prevents - * overrunning the end of the buffer with alignment words. - */ - if (to_align64 <= n64 - CACHE_LINE_SIZE_IN_DOUBLEWORDS) { - int lines_left; - - /* Align out64 mod the cache line size so we can use wh64. */ - n64 -= to_align64; - for (; to_align64 != 0; to_align64--) { - *out64 = v64; - out64++; - } - - /* Use unsigned divide to turn this into a right shift. */ - lines_left = (unsigned)n64 / CACHE_LINE_SIZE_IN_DOUBLEWORDS; - - do { - /* Only wh64 a few lines at a time, so we don't - * exceed the maximum number of victim lines. - */ - int x = ((lines_left < CHIP_MAX_OUTSTANDING_VICTIMS()) - ? lines_left - : CHIP_MAX_OUTSTANDING_VICTIMS()); - uint64_t *wh = out64; - int i = x; - int j; - - lines_left -= x; - - do { - __insn_wh64(wh); - wh += CACHE_LINE_SIZE_IN_DOUBLEWORDS; - } while (--i); - - for (j = x * (CACHE_LINE_SIZE_IN_DOUBLEWORDS / 4); - j != 0; j--) { - *out64++ = v64; - *out64++ = v64; - *out64++ = v64; - *out64++ = v64; - } - } while (lines_left != 0); - - /* We processed all full lines above, so only this many - * words remain to be processed. - */ - n64 &= CACHE_LINE_SIZE_IN_DOUBLEWORDS - 1; - } - - /* Now handle any leftover values. */ - if (n64 != 0) { - do { - *out64 = v64; - out64++; - } while (--n64 != 0); - } - - return s; -} -EXPORT_SYMBOL(memset); diff --git a/arch/tile/lib/spinlock_32.c b/arch/tile/lib/spinlock_32.c deleted file mode 100644 index db9333f2447c..000000000000 --- a/arch/tile/lib/spinlock_32.c +++ /dev/null @@ -1,251 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/spinlock.h> -#include <linux/module.h> -#include <asm/processor.h> -#include <arch/spr_def.h> - -#include "spinlock_common.h" - -void arch_spin_lock(arch_spinlock_t *lock) -{ - int my_ticket; - int iterations = 0; - int delta; - - while ((my_ticket = __insn_tns((void *)&lock->next_ticket)) & 1) - delay_backoff(iterations++); - - /* Increment the next ticket number, implicitly releasing tns lock. */ - lock->next_ticket = my_ticket + TICKET_QUANTUM; - - /* Wait until it's our turn. */ - while ((delta = my_ticket - lock->current_ticket) != 0) - relax((128 / CYCLES_PER_RELAX_LOOP) * delta); -} -EXPORT_SYMBOL(arch_spin_lock); - -int arch_spin_trylock(arch_spinlock_t *lock) -{ - /* - * Grab a ticket; no need to retry if it's busy, we'll just - * treat that the same as "locked", since someone else - * will lock it momentarily anyway. - */ - int my_ticket = __insn_tns((void *)&lock->next_ticket); - - if (my_ticket == lock->current_ticket) { - /* Not currently locked, so lock it by keeping this ticket. */ - lock->next_ticket = my_ticket + TICKET_QUANTUM; - /* Success! */ - return 1; - } - - if (!(my_ticket & 1)) { - /* Release next_ticket. */ - lock->next_ticket = my_ticket; - } - - return 0; -} -EXPORT_SYMBOL(arch_spin_trylock); - -/* - * The low byte is always reserved to be the marker for a "tns" operation - * since the low bit is set to "1" by a tns. The next seven bits are - * zeroes. The next byte holds the "next" writer value, i.e. the ticket - * available for the next task that wants to write. The third byte holds - * the current writer value, i.e. the writer who holds the current ticket. - * If current == next == 0, there are no interested writers. - */ -#define WR_NEXT_SHIFT _WR_NEXT_SHIFT -#define WR_CURR_SHIFT _WR_CURR_SHIFT -#define WR_WIDTH _WR_WIDTH -#define WR_MASK ((1 << WR_WIDTH) - 1) - -/* - * The last eight bits hold the active reader count. This has to be - * zero before a writer can start to write. - */ -#define RD_COUNT_SHIFT _RD_COUNT_SHIFT -#define RD_COUNT_WIDTH _RD_COUNT_WIDTH -#define RD_COUNT_MASK ((1 << RD_COUNT_WIDTH) - 1) - - -/* - * We can get the read lock if everything but the reader bits (which - * are in the high part of the word) is zero, i.e. no active or - * waiting writers, no tns. - * - * We guard the tns/store-back with an interrupt critical section to - * preserve the semantic that the same read lock can be acquired in an - * interrupt context. - */ -int arch_read_trylock(arch_rwlock_t *rwlock) -{ - u32 val; - __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 1); - val = __insn_tns((int *)&rwlock->lock); - if (likely((val << _RD_COUNT_WIDTH) == 0)) { - val += 1 << RD_COUNT_SHIFT; - rwlock->lock = val; - __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); - BUG_ON(val == 0); /* we don't expect wraparound */ - return 1; - } - if ((val & 1) == 0) - rwlock->lock = val; - __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); - return 0; -} -EXPORT_SYMBOL(arch_read_trylock); - -/* - * Spin doing arch_read_trylock() until we acquire the lock. - * ISSUE: This approach can permanently starve readers. A reader who sees - * a writer could instead take a ticket lock (just like a writer would), - * and atomically enter read mode (with 1 reader) when it gets the ticket. - * This way both readers and writers would always make forward progress - * in a finite time. - */ -void arch_read_lock(arch_rwlock_t *rwlock) -{ - u32 iterations = 0; - while (unlikely(!arch_read_trylock(rwlock))) - delay_backoff(iterations++); -} -EXPORT_SYMBOL(arch_read_lock); - -void arch_read_unlock(arch_rwlock_t *rwlock) -{ - u32 val, iterations = 0; - - mb(); /* guarantee anything modified under the lock is visible */ - for (;;) { - __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 1); - val = __insn_tns((int *)&rwlock->lock); - if (likely((val & 1) == 0)) { - rwlock->lock = val - (1 << _RD_COUNT_SHIFT); - __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); - break; - } - __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); - delay_backoff(iterations++); - } -} -EXPORT_SYMBOL(arch_read_unlock); - -/* - * We don't need an interrupt critical section here (unlike for - * arch_read_lock) since we should never use a bare write lock where - * it could be interrupted by code that could try to re-acquire it. - */ -void arch_write_lock(arch_rwlock_t *rwlock) -{ - /* - * The trailing underscore on this variable (and curr_ below) - * reminds us that the high bits are garbage; we mask them out - * when we compare them. - */ - u32 my_ticket_; - u32 iterations = 0; - u32 val = __insn_tns((int *)&rwlock->lock); - - if (likely(val == 0)) { - rwlock->lock = 1 << _WR_NEXT_SHIFT; - return; - } - - /* - * Wait until there are no readers, then bump up the next - * field and capture the ticket value. - */ - for (;;) { - if (!(val & 1)) { - if ((val >> RD_COUNT_SHIFT) == 0) - break; - rwlock->lock = val; - } - delay_backoff(iterations++); - val = __insn_tns((int *)&rwlock->lock); - } - - /* Take out the next ticket and extract my ticket value. */ - rwlock->lock = __insn_addb(val, 1 << WR_NEXT_SHIFT); - my_ticket_ = val >> WR_NEXT_SHIFT; - - /* Wait until the "current" field matches our ticket. */ - for (;;) { - u32 curr_ = val >> WR_CURR_SHIFT; - u32 delta = ((my_ticket_ - curr_) & WR_MASK); - if (likely(delta == 0)) - break; - - /* Delay based on how many lock-holders are still out there. */ - relax((256 / CYCLES_PER_RELAX_LOOP) * delta); - - /* - * Get a non-tns value to check; we don't need to tns - * it ourselves. Since we're not tns'ing, we retry - * more rapidly to get a valid value. - */ - while ((val = rwlock->lock) & 1) - relax(4); - } -} -EXPORT_SYMBOL(arch_write_lock); - -int arch_write_trylock(arch_rwlock_t *rwlock) -{ - u32 val = __insn_tns((int *)&rwlock->lock); - - /* - * If a tns is in progress, or there's a waiting or active locker, - * or active readers, we can't take the lock, so give up. - */ - if (unlikely(val != 0)) { - if (!(val & 1)) - rwlock->lock = val; - return 0; - } - - /* Set the "next" field to mark it locked. */ - rwlock->lock = 1 << _WR_NEXT_SHIFT; - return 1; -} -EXPORT_SYMBOL(arch_write_trylock); - -void arch_write_unlock(arch_rwlock_t *rwlock) -{ - u32 val, eq, mask; - - mb(); /* guarantee anything modified under the lock is visible */ - val = __insn_tns((int *)&rwlock->lock); - if (likely(val == (1 << _WR_NEXT_SHIFT))) { - rwlock->lock = 0; - return; - } - while (unlikely(val & 1)) { - /* Limited backoff since we are the highest-priority task. */ - relax(4); - val = __insn_tns((int *)&rwlock->lock); - } - mask = 1 << WR_CURR_SHIFT; - val = __insn_addb(val, mask); - eq = __insn_seqb(val, val << (WR_CURR_SHIFT - WR_NEXT_SHIFT)); - val = __insn_mz(eq & mask, val); - rwlock->lock = val; -} -EXPORT_SYMBOL(arch_write_unlock); diff --git a/arch/tile/lib/spinlock_64.c b/arch/tile/lib/spinlock_64.c deleted file mode 100644 index de414c22892f..000000000000 --- a/arch/tile/lib/spinlock_64.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/spinlock.h> -#include <linux/module.h> -#include <asm/processor.h> - -#include "spinlock_common.h" - -/* - * Read the spinlock value without allocating in our cache and without - * causing an invalidation to another cpu with a copy of the cacheline. - * This is important when we are spinning waiting for the lock. - */ -static inline u32 arch_spin_read_noalloc(void *lock) -{ - return atomic_cmpxchg((atomic_t *)lock, -1, -1); -} - -/* - * Wait until the high bits (current) match my ticket. - * If we notice the overflow bit set on entry, we clear it. - */ -void arch_spin_lock_slow(arch_spinlock_t *lock, u32 my_ticket) -{ - if (unlikely(my_ticket & __ARCH_SPIN_NEXT_OVERFLOW)) { - __insn_fetchand4(&lock->lock, ~__ARCH_SPIN_NEXT_OVERFLOW); - my_ticket &= ~__ARCH_SPIN_NEXT_OVERFLOW; - } - - for (;;) { - u32 val = arch_spin_read_noalloc(lock); - u32 delta = my_ticket - arch_spin_current(val); - if (delta == 0) - return; - relax((128 / CYCLES_PER_RELAX_LOOP) * delta); - } -} -EXPORT_SYMBOL(arch_spin_lock_slow); - -/* - * Check the lock to see if it is plausible, and try to get it with cmpxchg(). - */ -int arch_spin_trylock(arch_spinlock_t *lock) -{ - u32 val = arch_spin_read_noalloc(lock); - if (unlikely(arch_spin_current(val) != arch_spin_next(val))) - return 0; - return cmpxchg(&lock->lock, val, (val + 1) & ~__ARCH_SPIN_NEXT_OVERFLOW) - == val; -} -EXPORT_SYMBOL(arch_spin_trylock); - - -/* - * If the read lock fails due to a writer, we retry periodically - * until the value is positive and we write our incremented reader count. - */ -void __read_lock_failed(arch_rwlock_t *rw) -{ - u32 val; - int iterations = 0; - do { - delay_backoff(iterations++); - val = __insn_fetchaddgez4(&rw->lock, 1); - } while (unlikely(arch_write_val_locked(val))); -} -EXPORT_SYMBOL(__read_lock_failed); - -/* - * If we failed because there were readers, clear the "writer" bit - * so we don't block additional readers. Otherwise, there was another - * writer anyway, so our "fetchor" made no difference. Then wait, - * issuing periodic fetchor instructions, till we get the lock. - */ -void __write_lock_failed(arch_rwlock_t *rw, u32 val) -{ - int iterations = 0; - do { - if (!arch_write_val_locked(val)) - val = __insn_fetchand4(&rw->lock, ~__WRITE_LOCK_BIT); - delay_backoff(iterations++); - val = __insn_fetchor4(&rw->lock, __WRITE_LOCK_BIT); - } while (val != 0); -} -EXPORT_SYMBOL(__write_lock_failed); diff --git a/arch/tile/lib/spinlock_common.h b/arch/tile/lib/spinlock_common.h deleted file mode 100644 index 6ac37509faca..000000000000 --- a/arch/tile/lib/spinlock_common.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * This file is included into spinlock_32.c or _64.c. - */ - -/* - * The mfspr in __spinlock_relax() is 5 or 6 cycles plus 2 for loop - * overhead. - */ -#ifdef __tilegx__ -#define CYCLES_PER_RELAX_LOOP 7 -#else -#define CYCLES_PER_RELAX_LOOP 8 -#endif - -/* - * Idle the core for CYCLES_PER_RELAX_LOOP * iterations cycles. - */ -static inline void -relax(int iterations) -{ - for (/*above*/; iterations > 0; iterations--) - __insn_mfspr(SPR_PASS); - barrier(); -} - -/* Perform bounded exponential backoff.*/ -static void delay_backoff(int iterations) -{ - u32 exponent, loops; - - /* - * 2^exponent is how many times we go around the loop, - * which takes 8 cycles. We want to start with a 16- to 31-cycle - * loop, so we need to go around minimum 2 = 2^1 times, so we - * bias the original value up by 1. - */ - exponent = iterations + 1; - - /* - * Don't allow exponent to exceed 7, so we have 128 loops, - * or 1,024 (to 2,047) cycles, as our maximum. - */ - if (exponent > 8) - exponent = 8; - - loops = 1 << exponent; - - /* Add a randomness factor so two cpus never get in lock step. */ - loops += __insn_crc32_32(stack_pointer, get_cycles_low()) & - (loops - 1); - - relax(loops); -} diff --git a/arch/tile/lib/strchr_32.c b/arch/tile/lib/strchr_32.c deleted file mode 100644 index 841fe6963019..000000000000 --- a/arch/tile/lib/strchr_32.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <linux/module.h> - -char *strchr(const char *s, int c) -{ - int z, g; - - /* Get an aligned pointer. */ - const uintptr_t s_int = (uintptr_t) s; - const uint32_t *p = (const uint32_t *)(s_int & -4); - - /* Create four copies of the byte for which we are looking. */ - const uint32_t goal = 0x01010101 * (uint8_t) c; - - /* Read the first aligned word, but force bytes before the string to - * match neither zero nor goal (we make sure the high bit of each - * byte is 1, and the low 7 bits are all the opposite of the goal - * byte). - * - * Note that this shift count expression works because we know shift - * counts are taken mod 32. - */ - const uint32_t before_mask = (1 << (s_int << 3)) - 1; - uint32_t v = (*p | before_mask) ^ (goal & __insn_shrib(before_mask, 1)); - - uint32_t zero_matches, goal_matches; - while (1) { - /* Look for a terminating '\0'. */ - zero_matches = __insn_seqb(v, 0); - - /* Look for the goal byte. */ - goal_matches = __insn_seqb(v, goal); - - if (__builtin_expect(zero_matches | goal_matches, 0)) - break; - - v = *++p; - } - - z = __insn_ctz(zero_matches); - g = __insn_ctz(goal_matches); - - /* If we found c before '\0' we got a match. Note that if c == '\0' - * then g == z, and we correctly return the address of the '\0' - * rather than NULL. - */ - return (g <= z) ? ((char *)p) + (g >> 3) : NULL; -} -EXPORT_SYMBOL(strchr); diff --git a/arch/tile/lib/strchr_64.c b/arch/tile/lib/strchr_64.c deleted file mode 100644 index fe6e31c06f8d..000000000000 --- a/arch/tile/lib/strchr_64.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <linux/module.h> -#include "string-endian.h" - -char *strchr(const char *s, int c) -{ - int z, g; - - /* Get an aligned pointer. */ - const uintptr_t s_int = (uintptr_t) s; - const uint64_t *p = (const uint64_t *)(s_int & -8); - - /* Create eight copies of the byte for which we are looking. */ - const uint64_t goal = copy_byte(c); - - /* Read the first aligned word, but force bytes before the string to - * match neither zero nor goal (we make sure the high bit of each - * byte is 1, and the low 7 bits are all the opposite of the goal - * byte). - */ - const uint64_t before_mask = MASK(s_int); - uint64_t v = (*p | before_mask) ^ (goal & __insn_v1shrui(before_mask, 1)); - - uint64_t zero_matches, goal_matches; - while (1) { - /* Look for a terminating '\0'. */ - zero_matches = __insn_v1cmpeqi(v, 0); - - /* Look for the goal byte. */ - goal_matches = __insn_v1cmpeq(v, goal); - - if (__builtin_expect((zero_matches | goal_matches) != 0, 0)) - break; - - v = *++p; - } - - z = CFZ(zero_matches); - g = CFZ(goal_matches); - - /* If we found c before '\0' we got a match. Note that if c == '\0' - * then g == z, and we correctly return the address of the '\0' - * rather than NULL. - */ - return (g <= z) ? ((char *)p) + (g >> 3) : NULL; -} -EXPORT_SYMBOL(strchr); diff --git a/arch/tile/lib/string-endian.h b/arch/tile/lib/string-endian.h deleted file mode 100644 index 2e49cbfe9371..000000000000 --- a/arch/tile/lib/string-endian.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright 2013 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Provide a mask based on the pointer alignment that - * sets up non-zero bytes before the beginning of the string. - * The MASK expression works because shift counts are taken mod 64. - * Also, specify how to count "first" and "last" bits - * when the bits have been read as a word. - */ - -#include <asm/byteorder.h> - -#ifdef __LITTLE_ENDIAN -#define MASK(x) (__insn_shl(1ULL, (x << 3)) - 1) -#define NULMASK(x) ((2ULL << x) - 1) -#define CFZ(x) __insn_ctz(x) -#define REVCZ(x) __insn_clz(x) -#else -#define MASK(x) (__insn_shl(-2LL, ((-x << 3) - 1))) -#define NULMASK(x) (-2LL << (63 - x)) -#define CFZ(x) __insn_clz(x) -#define REVCZ(x) __insn_ctz(x) -#endif - -/* - * Create eight copies of the byte in a uint64_t. Byte Shuffle uses - * the bytes of srcB as the index into the dest vector to select a - * byte. With all indices of zero, the first byte is copied into all - * the other bytes. - */ -static inline uint64_t copy_byte(uint8_t byte) -{ - return __insn_shufflebytes(byte, 0, 0); -} diff --git a/arch/tile/lib/strlen_32.c b/arch/tile/lib/strlen_32.c deleted file mode 100644 index f26f88e11e4a..000000000000 --- a/arch/tile/lib/strlen_32.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <linux/module.h> - -size_t strlen(const char *s) -{ - /* Get an aligned pointer. */ - const uintptr_t s_int = (uintptr_t) s; - const uint32_t *p = (const uint32_t *)(s_int & -4); - - /* Read the first word, but force bytes before the string to be nonzero. - * This expression works because we know shift counts are taken mod 32. - */ - uint32_t v = *p | ((1 << (s_int << 3)) - 1); - - uint32_t bits; - while ((bits = __insn_seqb(v, 0)) == 0) - v = *++p; - - return ((const char *)p) + (__insn_ctz(bits) >> 3) - s; -} -EXPORT_SYMBOL(strlen); diff --git a/arch/tile/lib/strlen_64.c b/arch/tile/lib/strlen_64.c deleted file mode 100644 index 9583fc3361fa..000000000000 --- a/arch/tile/lib/strlen_64.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <linux/module.h> -#include "string-endian.h" - -size_t strlen(const char *s) -{ - /* Get an aligned pointer. */ - const uintptr_t s_int = (uintptr_t) s; - const uint64_t *p = (const uint64_t *)(s_int & -8); - - /* Read and MASK the first word. */ - uint64_t v = *p | MASK(s_int); - - uint64_t bits; - while ((bits = __insn_v1cmpeqi(v, 0)) == 0) - v = *++p; - - return ((const char *)p) + (CFZ(bits) >> 3) - s; -} -EXPORT_SYMBOL(strlen); diff --git a/arch/tile/lib/strnlen_32.c b/arch/tile/lib/strnlen_32.c deleted file mode 100644 index 1434141d9e01..000000000000 --- a/arch/tile/lib/strnlen_32.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright 2013 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <linux/module.h> - -size_t strnlen(const char *s, size_t count) -{ - /* Get an aligned pointer. */ - const uintptr_t s_int = (uintptr_t) s; - const uint32_t *p = (const uint32_t *)(s_int & -4); - size_t bytes_read = sizeof(*p) - (s_int & (sizeof(*p) - 1)); - size_t len; - uint32_t v, bits; - - /* Avoid page fault risk by not reading any bytes when count is 0. */ - if (count == 0) - return 0; - - /* Read first word, but force bytes before the string to be nonzero. */ - v = *p | ((1 << ((s_int << 3) & 31)) - 1); - - while ((bits = __insn_seqb(v, 0)) == 0) { - if (bytes_read >= count) { - /* Read COUNT bytes and didn't find the terminator. */ - return count; - } - v = *++p; - bytes_read += sizeof(v); - } - - len = ((const char *) p) + (__insn_ctz(bits) >> 3) - s; - return (len < count ? len : count); -} -EXPORT_SYMBOL(strnlen); diff --git a/arch/tile/lib/strnlen_64.c b/arch/tile/lib/strnlen_64.c deleted file mode 100644 index 2e8de6a5136f..000000000000 --- a/arch/tile/lib/strnlen_64.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright 2013 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <linux/module.h> -#include "string-endian.h" - -size_t strnlen(const char *s, size_t count) -{ - /* Get an aligned pointer. */ - const uintptr_t s_int = (uintptr_t) s; - const uint64_t *p = (const uint64_t *)(s_int & -8); - size_t bytes_read = sizeof(*p) - (s_int & (sizeof(*p) - 1)); - size_t len; - uint64_t v, bits; - - /* Avoid page fault risk by not reading any bytes when count is 0. */ - if (count == 0) - return 0; - - /* Read and MASK the first word. */ - v = *p | MASK(s_int); - - while ((bits = __insn_v1cmpeqi(v, 0)) == 0) { - if (bytes_read >= count) { - /* Read COUNT bytes and didn't find the terminator. */ - return count; - } - v = *++p; - bytes_read += sizeof(v); - } - - len = ((const char *) p) + (CFZ(bits) >> 3) - s; - return (len < count ? len : count); -} -EXPORT_SYMBOL(strnlen); diff --git a/arch/tile/lib/uaccess.c b/arch/tile/lib/uaccess.c deleted file mode 100644 index 030abe3ee4f1..000000000000 --- a/arch/tile/lib/uaccess.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/uaccess.h> -#include <linux/module.h> - -int __range_ok(unsigned long addr, unsigned long size) -{ - unsigned long limit = current_thread_info()->addr_limit.seg; - return !((addr < limit && size <= limit - addr) || - is_arch_mappable_range(addr, size)); -} -EXPORT_SYMBOL(__range_ok); diff --git a/arch/tile/lib/usercopy_32.S b/arch/tile/lib/usercopy_32.S deleted file mode 100644 index db93ad5fae25..000000000000 --- a/arch/tile/lib/usercopy_32.S +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/linkage.h> -#include <asm/errno.h> -#include <asm/cache.h> -#include <arch/chip.h> - -/* Access user memory, but use MMU to avoid propagating kernel exceptions. */ - -/* - * clear_user_asm takes the user target address in r0 and the - * number of bytes to zero in r1. - * It returns the number of uncopiable bytes (hopefully zero) in r0. - * Note that we don't use a separate .fixup section here since we fall - * through into the "fixup" code as the last straight-line bundle anyway. - */ -STD_ENTRY(clear_user_asm) - { bz r1, 2f; or r2, r0, r1 } - andi r2, r2, 3 - bzt r2, .Lclear_aligned_user_asm -1: { sb r0, zero; addi r0, r0, 1; addi r1, r1, -1 } - bnzt r1, 1b -2: { move r0, r1; jrp lr } - .pushsection __ex_table,"a" - .align 4 - .word 1b, 2b - .popsection - -.Lclear_aligned_user_asm: -1: { sw r0, zero; addi r0, r0, 4; addi r1, r1, -4 } - bnzt r1, 1b -2: { move r0, r1; jrp lr } - STD_ENDPROC(clear_user_asm) - .pushsection __ex_table,"a" - .align 4 - .word 1b, 2b - .popsection - -/* - * flush_user_asm takes the user target address in r0 and the - * number of bytes to flush in r1. - * It returns the number of unflushable bytes (hopefully zero) in r0. - */ -STD_ENTRY(flush_user_asm) - bz r1, 2f - { movei r2, L2_CACHE_BYTES; add r1, r0, r1 } - { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 } - { and r0, r0, r2; and r1, r1, r2 } - { sub r1, r1, r0 } -1: { flush r0; addi r1, r1, -CHIP_FLUSH_STRIDE() } - { addi r0, r0, CHIP_FLUSH_STRIDE(); bnzt r1, 1b } -2: { move r0, r1; jrp lr } - STD_ENDPROC(flush_user_asm) - .pushsection __ex_table,"a" - .align 4 - .word 1b, 2b - .popsection - -/* - * finv_user_asm takes the user target address in r0 and the - * number of bytes to flush-invalidate in r1. - * It returns the number of not finv'able bytes (hopefully zero) in r0. - */ -STD_ENTRY(finv_user_asm) - bz r1, 2f - { movei r2, L2_CACHE_BYTES; add r1, r0, r1 } - { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 } - { and r0, r0, r2; and r1, r1, r2 } - { sub r1, r1, r0 } -1: { finv r0; addi r1, r1, -CHIP_FINV_STRIDE() } - { addi r0, r0, CHIP_FINV_STRIDE(); bnzt r1, 1b } -2: { move r0, r1; jrp lr } - STD_ENDPROC(finv_user_asm) - .pushsection __ex_table,"a" - .align 4 - .word 1b, 2b - .popsection diff --git a/arch/tile/lib/usercopy_64.S b/arch/tile/lib/usercopy_64.S deleted file mode 100644 index 9322dc551e91..000000000000 --- a/arch/tile/lib/usercopy_64.S +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/linkage.h> -#include <asm/errno.h> -#include <asm/cache.h> -#include <arch/chip.h> - -/* Access user memory, but use MMU to avoid propagating kernel exceptions. */ - -/* - * clear_user_asm takes the user target address in r0 and the - * number of bytes to zero in r1. - * It returns the number of uncopiable bytes (hopefully zero) in r0. - * Note that we don't use a separate .fixup section here since we fall - * through into the "fixup" code as the last straight-line bundle anyway. - */ -STD_ENTRY(clear_user_asm) - { beqz r1, 2f; or r2, r0, r1 } - andi r2, r2, 7 - beqzt r2, .Lclear_aligned_user_asm -1: { st1 r0, zero; addi r0, r0, 1; addi r1, r1, -1 } - bnezt r1, 1b -2: { move r0, r1; jrp lr } - .pushsection __ex_table,"a" - .align 8 - .quad 1b, 2b - .popsection - -.Lclear_aligned_user_asm: -1: { st r0, zero; addi r0, r0, 8; addi r1, r1, -8 } - bnezt r1, 1b -2: { move r0, r1; jrp lr } - STD_ENDPROC(clear_user_asm) - .pushsection __ex_table,"a" - .align 8 - .quad 1b, 2b - .popsection - -/* - * flush_user_asm takes the user target address in r0 and the - * number of bytes to flush in r1. - * It returns the number of unflushable bytes (hopefully zero) in r0. - */ -STD_ENTRY(flush_user_asm) - beqz r1, 2f - { movei r2, L2_CACHE_BYTES; add r1, r0, r1 } - { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 } - { and r0, r0, r2; and r1, r1, r2 } - { sub r1, r1, r0 } -1: { flush r0; addi r1, r1, -CHIP_FLUSH_STRIDE() } - { addi r0, r0, CHIP_FLUSH_STRIDE(); bnezt r1, 1b } -2: { move r0, r1; jrp lr } - STD_ENDPROC(flush_user_asm) - .pushsection __ex_table,"a" - .align 8 - .quad 1b, 2b - .popsection - -/* - * finv_user_asm takes the user target address in r0 and the - * number of bytes to flush-invalidate in r1. - * It returns the number of not finv'able bytes (hopefully zero) in r0. - */ -STD_ENTRY(finv_user_asm) - beqz r1, 2f - { movei r2, L2_CACHE_BYTES; add r1, r0, r1 } - { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 } - { and r0, r0, r2; and r1, r1, r2 } - { sub r1, r1, r0 } -1: { finv r0; addi r1, r1, -CHIP_FINV_STRIDE() } - { addi r0, r0, CHIP_FINV_STRIDE(); bnezt r1, 1b } -2: { move r0, r1; jrp lr } - STD_ENDPROC(finv_user_asm) - .pushsection __ex_table,"a" - .align 8 - .quad 1b, 2b - .popsection diff --git a/arch/tile/mm/Makefile b/arch/tile/mm/Makefile deleted file mode 100644 index e252aeddc17d..000000000000 --- a/arch/tile/mm/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Makefile for the linux tile-specific parts of the memory manager. -# - -obj-y := init.o pgtable.o fault.o extable.o elf.o \ - mmap.o homecache.o migrate_$(BITS).o - -obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o -obj-$(CONFIG_HIGHMEM) += highmem.o diff --git a/arch/tile/mm/elf.c b/arch/tile/mm/elf.c deleted file mode 100644 index 889901824400..000000000000 --- a/arch/tile/mm/elf.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/mm.h> -#include <linux/pagemap.h> -#include <linux/binfmts.h> -#include <linux/compat.h> -#include <linux/mman.h> -#include <linux/file.h> -#include <linux/elf.h> -#include <asm/pgtable.h> -#include <asm/pgalloc.h> -#include <asm/sections.h> -#include <asm/vdso.h> -#include <arch/sim.h> - -/* Notify a running simulator, if any, that an exec just occurred. */ -static void sim_notify_exec(const char *binary_name) -{ - unsigned char c; - do { - c = *binary_name++; - __insn_mtspr(SPR_SIM_CONTROL, - (SIM_CONTROL_OS_EXEC - | (c << _SIM_CONTROL_OPERATOR_BITS))); - - } while (c); -} - -static int notify_exec(struct mm_struct *mm) -{ - int ret = 0; - char *buf, *path; - struct vm_area_struct *vma; - struct file *exe_file; - - if (!sim_is_simulator()) - return 1; - - buf = (char *) __get_free_page(GFP_KERNEL); - if (buf == NULL) - return 0; - - exe_file = get_mm_exe_file(mm); - if (exe_file == NULL) - goto done_free; - - path = file_path(exe_file, buf, PAGE_SIZE); - if (IS_ERR(path)) - goto done_put; - - down_read(&mm->mmap_sem); - for (vma = current->mm->mmap; ; vma = vma->vm_next) { - if (vma == NULL) { - up_read(&mm->mmap_sem); - goto done_put; - } - if (vma->vm_file == exe_file) - break; - } - - /* - * Notify simulator of an ET_DYN object so we know the load address. - * The somewhat cryptic overuse of SIM_CONTROL_DLOPEN allows us - * to be backward-compatible with older simulator releases. - */ - if (vma->vm_start == (ELF_ET_DYN_BASE & PAGE_MASK)) { - char buf[64]; - int i; - - snprintf(buf, sizeof(buf), "0x%lx:@", vma->vm_start); - for (i = 0; ; ++i) { - char c = buf[i]; - __insn_mtspr(SPR_SIM_CONTROL, - (SIM_CONTROL_DLOPEN - | (c << _SIM_CONTROL_OPERATOR_BITS))); - if (c == '\0') { - ret = 1; /* success */ - break; - } - } - } - up_read(&mm->mmap_sem); - - sim_notify_exec(path); -done_put: - fput(exe_file); -done_free: - free_page((unsigned long)buf); - return ret; -} - -/* Notify a running simulator, if any, that we loaded an interpreter. */ -static void sim_notify_interp(unsigned long load_addr) -{ - size_t i; - for (i = 0; i < sizeof(load_addr); i++) { - unsigned char c = load_addr >> (i * 8); - __insn_mtspr(SPR_SIM_CONTROL, - (SIM_CONTROL_OS_INTERP - | (c << _SIM_CONTROL_OPERATOR_BITS))); - } -} - - -int arch_setup_additional_pages(struct linux_binprm *bprm, - int executable_stack) -{ - struct mm_struct *mm = current->mm; - int retval = 0; - - /* - * Notify the simulator that an exec just occurred. - * If we can't find the filename of the mapping, just use - * whatever was passed as the linux_binprm filename. - */ - if (!notify_exec(mm)) - sim_notify_exec(bprm->filename); - - down_write(&mm->mmap_sem); - - retval = setup_vdso_pages(); - -#ifndef __tilegx__ - /* - * Set up a user-interrupt mapping here; the user can't - * create one themselves since it is above TASK_SIZE. - * We make it unwritable by default, so the model for adding - * interrupt vectors always involves an mprotect. - */ - if (!retval) { - unsigned long addr = MEM_USER_INTRPT; - addr = mmap_region(NULL, addr, INTRPT_SIZE, - VM_READ|VM_EXEC| - VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC, 0, NULL); - if (addr > (unsigned long) -PAGE_SIZE) - retval = (int) addr; - } -#endif - - up_write(&mm->mmap_sem); - - return retval; -} - - -void elf_plat_init(struct pt_regs *regs, unsigned long load_addr) -{ - /* Zero all registers. */ - memset(regs, 0, sizeof(*regs)); - - /* Report the interpreter's load address. */ - sim_notify_interp(load_addr); -} diff --git a/arch/tile/mm/extable.c b/arch/tile/mm/extable.c deleted file mode 100644 index aeaf20c7aaa4..000000000000 --- a/arch/tile/mm/extable.c +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/extable.h> -#include <linux/spinlock.h> -#include <linux/uaccess.h> - -int fixup_exception(struct pt_regs *regs) -{ - const struct exception_table_entry *fixup; - - fixup = search_exception_tables(regs->pc); - if (fixup) { - regs->pc = fixup->fixup; - return 1; - } - - return 0; -} diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c deleted file mode 100644 index f58fa06a2214..000000000000 --- a/arch/tile/mm/fault.c +++ /dev/null @@ -1,924 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * From i386 code copyright (C) 1995 Linus Torvalds - */ - -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/sched/debug.h> -#include <linux/sched/task.h> -#include <linux/sched/task_stack.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/ptrace.h> -#include <linux/mman.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/tty.h> -#include <linux/vt_kern.h> /* For unblank_screen() */ -#include <linux/highmem.h> -#include <linux/extable.h> -#include <linux/kprobes.h> -#include <linux/hugetlb.h> -#include <linux/syscalls.h> -#include <linux/uaccess.h> -#include <linux/kdebug.h> - -#include <asm/pgalloc.h> -#include <asm/sections.h> -#include <asm/traps.h> -#include <asm/syscalls.h> - -#include <arch/interrupts.h> - -static noinline void force_sig_info_fault(const char *type, int si_signo, - int si_code, unsigned long address, - int fault_num, - struct task_struct *tsk, - struct pt_regs *regs) -{ - siginfo_t info; - - if (unlikely(tsk->pid < 2)) { - panic("Signal %d (code %d) at %#lx sent to %s!", - si_signo, si_code & 0xffff, address, - is_idle_task(tsk) ? "the idle task" : "init"); - } - - info.si_signo = si_signo; - info.si_errno = 0; - info.si_code = si_code; - info.si_addr = (void __user *)address; - info.si_trapno = fault_num; - trace_unhandled_signal(type, regs, address, si_signo); - force_sig_info(si_signo, &info, tsk); -} - -#ifndef __tilegx__ -/* - * Synthesize the fault a PL0 process would get by doing a word-load of - * an unaligned address or a high kernel address. - */ -SYSCALL_DEFINE1(cmpxchg_badaddr, unsigned long, address) -{ - struct pt_regs *regs = current_pt_regs(); - - if (address >= PAGE_OFFSET) - force_sig_info_fault("atomic segfault", SIGSEGV, SEGV_MAPERR, - address, INT_DTLB_MISS, current, regs); - else - force_sig_info_fault("atomic alignment fault", SIGBUS, - BUS_ADRALN, address, - INT_UNALIGN_DATA, current, regs); - - /* - * Adjust pc to point at the actual instruction, which is unusual - * for syscalls normally, but is appropriate when we are claiming - * that a syscall swint1 caused a page fault or bus error. - */ - regs->pc -= 8; - - /* - * Mark this as a caller-save interrupt, like a normal page fault, - * so that when we go through the signal handler path we will - * properly restore r0, r1, and r2 for the signal handler arguments. - */ - regs->flags |= PT_FLAGS_CALLER_SAVES; - - return 0; -} -#endif - -static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address) -{ - unsigned index = pgd_index(address); - pgd_t *pgd_k; - pud_t *pud, *pud_k; - pmd_t *pmd, *pmd_k; - - pgd += index; - pgd_k = init_mm.pgd + index; - - if (!pgd_present(*pgd_k)) - return NULL; - - pud = pud_offset(pgd, address); - pud_k = pud_offset(pgd_k, address); - if (!pud_present(*pud_k)) - return NULL; - - pmd = pmd_offset(pud, address); - pmd_k = pmd_offset(pud_k, address); - if (!pmd_present(*pmd_k)) - return NULL; - if (!pmd_present(*pmd)) - set_pmd(pmd, *pmd_k); - else - BUG_ON(pmd_ptfn(*pmd) != pmd_ptfn(*pmd_k)); - return pmd_k; -} - -/* - * Handle a fault on the vmalloc area. - */ -static inline int vmalloc_fault(pgd_t *pgd, unsigned long address) -{ - pmd_t *pmd_k; - pte_t *pte_k; - - /* Make sure we are in vmalloc area */ - if (!(address >= VMALLOC_START && address < VMALLOC_END)) - return -1; - - /* - * Synchronize this task's top level page-table - * with the 'reference' page table. - */ - pmd_k = vmalloc_sync_one(pgd, address); - if (!pmd_k) - return -1; - pte_k = pte_offset_kernel(pmd_k, address); - if (!pte_present(*pte_k)) - return -1; - return 0; -} - -/* Wait until this PTE has completed migration. */ -static void wait_for_migration(pte_t *pte) -{ - if (pte_migrating(*pte)) { - /* - * Wait until the migrater fixes up this pte. - * We scale the loop count by the clock rate so we'll wait for - * a few seconds here. - */ - int retries = 0; - int bound = get_clock_rate(); - while (pte_migrating(*pte)) { - barrier(); - if (++retries > bound) - panic("Hit migrating PTE (%#llx) and page PFN %#lx still migrating", - pte->val, pte_pfn(*pte)); - } - } -} - -/* - * It's not generally safe to use "current" to get the page table pointer, - * since we might be running an oprofile interrupt in the middle of a - * task switch. - */ -static pgd_t *get_current_pgd(void) -{ - HV_Context ctx = hv_inquire_context(); - unsigned long pgd_pfn = ctx.page_table >> PAGE_SHIFT; - struct page *pgd_page = pfn_to_page(pgd_pfn); - BUG_ON(PageHighMem(pgd_page)); - return (pgd_t *) __va(ctx.page_table); -} - -/* - * We can receive a page fault from a migrating PTE at any time. - * Handle it by just waiting until the fault resolves. - * - * It's also possible to get a migrating kernel PTE that resolves - * itself during the downcall from hypervisor to Linux. We just check - * here to see if the PTE seems valid, and if so we retry it. - * - * NOTE! We MUST NOT take any locks for this case. We may be in an - * interrupt or a critical region, and must do as little as possible. - * Similarly, we can't use atomic ops here, since we may be handling a - * fault caused by an atomic op access. - * - * If we find a migrating PTE while we're in an NMI context, and we're - * at a PC that has a registered exception handler, we don't wait, - * since this thread may (e.g.) have been interrupted while migrating - * its own stack, which would then cause us to self-deadlock. - */ -static int handle_migrating_pte(pgd_t *pgd, int fault_num, - unsigned long address, unsigned long pc, - int is_kernel_mode, int write) -{ - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - pte_t pteval; - - if (pgd_addr_invalid(address)) - return 0; - - pgd += pgd_index(address); - pud = pud_offset(pgd, address); - if (!pud || !pud_present(*pud)) - return 0; - pmd = pmd_offset(pud, address); - if (!pmd || !pmd_present(*pmd)) - return 0; - pte = pmd_huge_page(*pmd) ? ((pte_t *)pmd) : - pte_offset_kernel(pmd, address); - pteval = *pte; - if (pte_migrating(pteval)) { - if (in_nmi() && search_exception_tables(pc)) - return 0; - wait_for_migration(pte); - return 1; - } - - if (!is_kernel_mode || !pte_present(pteval)) - return 0; - if (fault_num == INT_ITLB_MISS) { - if (pte_exec(pteval)) - return 1; - } else if (write) { - if (pte_write(pteval)) - return 1; - } else { - if (pte_read(pteval)) - return 1; - } - - return 0; -} - -/* - * This routine is responsible for faulting in user pages. - * It passes the work off to one of the appropriate routines. - * It returns true if the fault was successfully handled. - */ -static int handle_page_fault(struct pt_regs *regs, - int fault_num, - int is_page_fault, - unsigned long address, - int write) -{ - struct task_struct *tsk; - struct mm_struct *mm; - struct vm_area_struct *vma; - unsigned long stack_offset; - int fault; - int si_code; - int is_kernel_mode; - pgd_t *pgd; - unsigned int flags; - - /* on TILE, protection faults are always writes */ - if (!is_page_fault) - write = 1; - - flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; - - is_kernel_mode = !user_mode(regs); - - tsk = validate_current(); - - /* - * Check to see if we might be overwriting the stack, and bail - * out if so. The page fault code is a relatively likely - * place to get trapped in an infinite regress, and once we - * overwrite the whole stack, it becomes very hard to recover. - */ - stack_offset = stack_pointer & (THREAD_SIZE-1); - if (stack_offset < THREAD_SIZE / 8) { - pr_alert("Potential stack overrun: sp %#lx\n", stack_pointer); - show_regs(regs); - pr_alert("Killing current process %d/%s\n", - tsk->pid, tsk->comm); - do_group_exit(SIGKILL); - } - - /* - * Early on, we need to check for migrating PTE entries; - * see homecache.c. If we find a migrating PTE, we wait until - * the backing page claims to be done migrating, then we proceed. - * For kernel PTEs, we rewrite the PTE and return and retry. - * Otherwise, we treat the fault like a normal "no PTE" fault, - * rather than trying to patch up the existing PTE. - */ - pgd = get_current_pgd(); - if (handle_migrating_pte(pgd, fault_num, address, regs->pc, - is_kernel_mode, write)) - return 1; - - si_code = SEGV_MAPERR; - - /* - * We fault-in kernel-space virtual memory on-demand. The - * 'reference' page table is init_mm.pgd. - * - * NOTE! We MUST NOT take any locks for this case. We may - * be in an interrupt or a critical region, and should - * only copy the information from the master page table, - * nothing more. - * - * This verifies that the fault happens in kernel space - * and that the fault was not a protection fault. - */ - if (unlikely(address >= TASK_SIZE && - !is_arch_mappable_range(address, 0))) { - if (is_kernel_mode && is_page_fault && - vmalloc_fault(pgd, address) >= 0) - return 1; - /* - * Don't take the mm semaphore here. If we fixup a prefetch - * fault we could otherwise deadlock. - */ - mm = NULL; /* happy compiler */ - vma = NULL; - goto bad_area_nosemaphore; - } - - /* - * If we're trying to touch user-space addresses, we must - * be either at PL0, or else with interrupts enabled in the - * kernel, so either way we can re-enable interrupts here - * unless we are doing atomic access to user space with - * interrupts disabled. - */ - if (!(regs->flags & PT_FLAGS_DISABLE_IRQ)) - local_irq_enable(); - - mm = tsk->mm; - - /* - * If we're in an interrupt, have no user context or are running in an - * region with pagefaults disabled then we must not take the fault. - */ - if (pagefault_disabled() || !mm) { - vma = NULL; /* happy compiler */ - goto bad_area_nosemaphore; - } - - if (!is_kernel_mode) - flags |= FAULT_FLAG_USER; - - /* - * When running in the kernel we expect faults to occur only to - * addresses in user space. All other faults represent errors in the - * kernel and should generate an OOPS. Unfortunately, in the case of an - * erroneous fault occurring in a code path which already holds mmap_sem - * we will deadlock attempting to validate the fault against the - * address space. Luckily the kernel only validly references user - * space from well defined areas of code, which are listed in the - * exceptions table. - * - * As the vast majority of faults will be valid we will only perform - * the source reference check when there is a possibility of a deadlock. - * Attempt to lock the address space, if we cannot we then validate the - * source. If this is invalid we can skip the address space check, - * thus avoiding the deadlock. - */ - if (!down_read_trylock(&mm->mmap_sem)) { - if (is_kernel_mode && - !search_exception_tables(regs->pc)) { - vma = NULL; /* happy compiler */ - goto bad_area_nosemaphore; - } - -retry: - down_read(&mm->mmap_sem); - } - - vma = find_vma(mm, address); - if (!vma) - goto bad_area; - if (vma->vm_start <= address) - goto good_area; - if (!(vma->vm_flags & VM_GROWSDOWN)) - goto bad_area; - if (regs->sp < PAGE_OFFSET) { - /* - * accessing the stack below sp is always a bug. - */ - if (address < regs->sp) - goto bad_area; - } - if (expand_stack(vma, address)) - goto bad_area; - -/* - * Ok, we have a good vm_area for this memory access, so - * we can handle it.. - */ -good_area: - si_code = SEGV_ACCERR; - if (fault_num == INT_ITLB_MISS) { - if (!(vma->vm_flags & VM_EXEC)) - goto bad_area; - } else if (write) { -#ifdef TEST_VERIFY_AREA - if (!is_page_fault && regs->cs == KERNEL_CS) - pr_err("WP fault at " REGFMT "\n", regs->eip); -#endif - if (!(vma->vm_flags & VM_WRITE)) - goto bad_area; - flags |= FAULT_FLAG_WRITE; - } else { - if (!is_page_fault || !(vma->vm_flags & VM_READ)) - goto bad_area; - } - - /* - * If for any reason at all we couldn't handle the fault, - * make sure we exit gracefully rather than endlessly redo - * the fault. - */ - fault = handle_mm_fault(vma, address, flags); - - if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) - return 0; - - if (unlikely(fault & VM_FAULT_ERROR)) { - if (fault & VM_FAULT_OOM) - goto out_of_memory; - else if (fault & VM_FAULT_SIGSEGV) - goto bad_area; - else if (fault & VM_FAULT_SIGBUS) - goto do_sigbus; - BUG(); - } - if (flags & FAULT_FLAG_ALLOW_RETRY) { - if (fault & VM_FAULT_MAJOR) - tsk->maj_flt++; - else - tsk->min_flt++; - if (fault & VM_FAULT_RETRY) { - flags &= ~FAULT_FLAG_ALLOW_RETRY; - flags |= FAULT_FLAG_TRIED; - - /* - * No need to up_read(&mm->mmap_sem) as we would - * have already released it in __lock_page_or_retry - * in mm/filemap.c. - */ - goto retry; - } - } - -#if CHIP_HAS_TILE_DMA() - /* If this was a DMA TLB fault, restart the DMA engine. */ - switch (fault_num) { - case INT_DMATLB_MISS: - case INT_DMATLB_MISS_DWNCL: - case INT_DMATLB_ACCESS: - case INT_DMATLB_ACCESS_DWNCL: - __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK); - break; - } -#endif - - up_read(&mm->mmap_sem); - return 1; - -/* - * Something tried to access memory that isn't in our memory map.. - * Fix it, but check if it's kernel or user first.. - */ -bad_area: - up_read(&mm->mmap_sem); - -bad_area_nosemaphore: - /* User mode accesses just cause a SIGSEGV */ - if (!is_kernel_mode) { - /* - * It's possible to have interrupts off here. - */ - local_irq_enable(); - - force_sig_info_fault("segfault", SIGSEGV, si_code, address, - fault_num, tsk, regs); - return 0; - } - -no_context: - /* Are we prepared to handle this kernel fault? */ - if (fixup_exception(regs)) - return 0; - -/* - * Oops. The kernel tried to access some bad page. We'll have to - * terminate things with extreme prejudice. - */ - - bust_spinlocks(1); - - /* FIXME: no lookup_address() yet */ -#ifdef SUPPORT_LOOKUP_ADDRESS - if (fault_num == INT_ITLB_MISS) { - pte_t *pte = lookup_address(address); - - if (pte && pte_present(*pte) && !pte_exec_kernel(*pte)) - pr_crit("kernel tried to execute non-executable page - exploit attempt? (uid: %d)\n", - current->uid); - } -#endif - if (address < PAGE_SIZE) - pr_alert("Unable to handle kernel NULL pointer dereference\n"); - else - pr_alert("Unable to handle kernel paging request\n"); - pr_alert(" at virtual address " REGFMT ", pc " REGFMT "\n", - address, regs->pc); - - show_regs(regs); - - if (unlikely(tsk->pid < 2)) { - panic("Kernel page fault running %s!", - is_idle_task(tsk) ? "the idle task" : "init"); - } - - /* - * More FIXME: we should probably copy the i386 here and - * implement a generic die() routine. Not today. - */ -#ifdef SUPPORT_DIE - die("Oops", regs); -#endif - bust_spinlocks(1); - - do_group_exit(SIGKILL); - -/* - * We ran out of memory, or some other thing happened to us that made - * us unable to handle the page fault gracefully. - */ -out_of_memory: - up_read(&mm->mmap_sem); - if (is_kernel_mode) - goto no_context; - pagefault_out_of_memory(); - return 0; - -do_sigbus: - up_read(&mm->mmap_sem); - - /* Kernel mode? Handle exceptions or die */ - if (is_kernel_mode) - goto no_context; - - force_sig_info_fault("bus error", SIGBUS, BUS_ADRERR, address, - fault_num, tsk, regs); - return 0; -} - -#ifndef __tilegx__ - -/* We must release ICS before panicking or we won't get anywhere. */ -#define ics_panic(fmt, ...) \ -do { \ - __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); \ - panic(fmt, ##__VA_ARGS__); \ -} while (0) - -/* - * When we take an ITLB or DTLB fault or access violation in the - * supervisor while the critical section bit is set, the hypervisor is - * reluctant to write new values into the EX_CONTEXT_K_x registers, - * since that might indicate we have not yet squirreled the SPR - * contents away and can thus safely take a recursive interrupt. - * Accordingly, the hypervisor passes us the PC via SYSTEM_SAVE_K_2. - * - * Note that this routine is called before homecache_tlb_defer_enter(), - * which means that we can properly unlock any atomics that might - * be used there (good), but also means we must be very sensitive - * to not touch any data structures that might be located in memory - * that could migrate, as we could be entering the kernel on a dataplane - * cpu that has been deferring kernel TLB updates. This means, for - * example, that we can't migrate init_mm or its pgd. - */ -struct intvec_state do_page_fault_ics(struct pt_regs *regs, int fault_num, - unsigned long address, - unsigned long info) -{ - unsigned long pc = info & ~1; - int write = info & 1; - pgd_t *pgd = get_current_pgd(); - - /* Retval is 1 at first since we will handle the fault fully. */ - struct intvec_state state = { - do_page_fault, fault_num, address, write, 1 - }; - - /* Validate that we are plausibly in the right routine. */ - if ((pc & 0x7) != 0 || pc < PAGE_OFFSET || - (fault_num != INT_DTLB_MISS && - fault_num != INT_DTLB_ACCESS)) { - unsigned long old_pc = regs->pc; - regs->pc = pc; - ics_panic("Bad ICS page fault args: old PC %#lx, fault %d/%d at %#lx", - old_pc, fault_num, write, address); - } - - /* We might be faulting on a vmalloc page, so check that first. */ - if (fault_num != INT_DTLB_ACCESS && vmalloc_fault(pgd, address) >= 0) - return state; - - /* - * If we faulted with ICS set in sys_cmpxchg, we are providing - * a user syscall service that should generate a signal on - * fault. We didn't set up a kernel stack on initial entry to - * sys_cmpxchg, but instead had one set up by the fault, which - * (because sys_cmpxchg never releases ICS) came to us via the - * SYSTEM_SAVE_K_2 mechanism, and thus EX_CONTEXT_K_[01] are - * still referencing the original user code. We release the - * atomic lock and rewrite pt_regs so that it appears that we - * came from user-space directly, and after we finish the - * fault we'll go back to user space and re-issue the swint. - * This way the backtrace information is correct if we need to - * emit a stack dump at any point while handling this. - * - * Must match register use in sys_cmpxchg(). - */ - if (pc >= (unsigned long) sys_cmpxchg && - pc < (unsigned long) __sys_cmpxchg_end) { -#ifdef CONFIG_SMP - /* Don't unlock before we could have locked. */ - if (pc >= (unsigned long)__sys_cmpxchg_grab_lock) { - int *lock_ptr = (int *)(regs->regs[ATOMIC_LOCK_REG]); - __atomic_fault_unlock(lock_ptr); - } -#endif - regs->sp = regs->regs[27]; - } - - /* - * We can also fault in the atomic assembly, in which - * case we use the exception table to do the first-level fixup. - * We may re-fixup again in the real fault handler if it - * turns out the faulting address is just bad, and not, - * for example, migrating. - */ - else if (pc >= (unsigned long) __start_atomic_asm_code && - pc < (unsigned long) __end_atomic_asm_code) { - const struct exception_table_entry *fixup; -#ifdef CONFIG_SMP - /* Unlock the atomic lock. */ - int *lock_ptr = (int *)(regs->regs[ATOMIC_LOCK_REG]); - __atomic_fault_unlock(lock_ptr); -#endif - fixup = search_exception_tables(pc); - if (!fixup) - ics_panic("ICS atomic fault not in table: PC %#lx, fault %d", - pc, fault_num); - regs->pc = fixup->fixup; - regs->ex1 = PL_ICS_EX1(KERNEL_PL, 0); - } - - /* - * Now that we have released the atomic lock (if necessary), - * it's safe to spin if the PTE that caused the fault was migrating. - */ - if (fault_num == INT_DTLB_ACCESS) - write = 1; - if (handle_migrating_pte(pgd, fault_num, address, pc, 1, write)) - return state; - - /* Return zero so that we continue on with normal fault handling. */ - state.retval = 0; - return state; -} - -#endif /* !__tilegx__ */ - -/* - * This routine handles page faults. It determines the address, and the - * problem, and then passes it handle_page_fault() for normal DTLB and - * ITLB issues, and for DMA or SN processor faults when we are in user - * space. For the latter, if we're in kernel mode, we just save the - * interrupt away appropriately and return immediately. We can't do - * page faults for user code while in kernel mode. - */ -static inline void __do_page_fault(struct pt_regs *regs, int fault_num, - unsigned long address, unsigned long write) -{ - int is_page_fault; - -#ifdef CONFIG_KPROBES - /* - * This is to notify the fault handler of the kprobes. The - * exception code is redundant as it is also carried in REGS, - * but we pass it anyhow. - */ - if (notify_die(DIE_PAGE_FAULT, "page fault", regs, -1, - regs->faultnum, SIGSEGV) == NOTIFY_STOP) - return; -#endif - -#ifdef __tilegx__ - /* - * We don't need early do_page_fault_ics() support, since unlike - * Pro we don't need to worry about unlocking the atomic locks. - * There is only one current case in GX where we touch any memory - * under ICS other than our own kernel stack, and we handle that - * here. (If we crash due to trying to touch our own stack, - * we're in too much trouble for C code to help out anyway.) - */ - if (write & ~1) { - unsigned long pc = write & ~1; - if (pc >= (unsigned long) __start_unalign_asm_code && - pc < (unsigned long) __end_unalign_asm_code) { - struct thread_info *ti = current_thread_info(); - /* - * Our EX_CONTEXT is still what it was from the - * initial unalign exception, but now we've faulted - * on the JIT page. We would like to complete the - * page fault however is appropriate, and then retry - * the instruction that caused the unalign exception. - * Our state has been "corrupted" by setting the low - * bit in "sp", and stashing r0..r3 in the - * thread_info area, so we revert all of that, then - * continue as if this were a normal page fault. - */ - regs->sp &= ~1UL; - regs->regs[0] = ti->unalign_jit_tmp[0]; - regs->regs[1] = ti->unalign_jit_tmp[1]; - regs->regs[2] = ti->unalign_jit_tmp[2]; - regs->regs[3] = ti->unalign_jit_tmp[3]; - write &= 1; - } else { - pr_alert("%s/%d: ICS set at page fault at %#lx: %#lx\n", - current->comm, current->pid, pc, address); - show_regs(regs); - do_group_exit(SIGKILL); - } - } -#else - /* This case should have been handled by do_page_fault_ics(). */ - BUG_ON(write & ~1); -#endif - -#if CHIP_HAS_TILE_DMA() - /* - * If it's a DMA fault, suspend the transfer while we're - * handling the miss; we'll restart after it's handled. If we - * don't suspend, it's possible that this process could swap - * out and back in, and restart the engine since the DMA is - * still 'running'. - */ - if (fault_num == INT_DMATLB_MISS || - fault_num == INT_DMATLB_ACCESS || - fault_num == INT_DMATLB_MISS_DWNCL || - fault_num == INT_DMATLB_ACCESS_DWNCL) { - __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__SUSPEND_MASK); - while (__insn_mfspr(SPR_DMA_USER_STATUS) & - SPR_DMA_STATUS__BUSY_MASK) - ; - } -#endif - - /* Validate fault num and decide if this is a first-time page fault. */ - switch (fault_num) { - case INT_ITLB_MISS: - case INT_DTLB_MISS: -#if CHIP_HAS_TILE_DMA() - case INT_DMATLB_MISS: - case INT_DMATLB_MISS_DWNCL: -#endif - is_page_fault = 1; - break; - - case INT_DTLB_ACCESS: -#if CHIP_HAS_TILE_DMA() - case INT_DMATLB_ACCESS: - case INT_DMATLB_ACCESS_DWNCL: -#endif - is_page_fault = 0; - break; - - default: - panic("Bad fault number %d in do_page_fault", fault_num); - } - -#if CHIP_HAS_TILE_DMA() - if (!user_mode(regs)) { - struct async_tlb *async; - switch (fault_num) { -#if CHIP_HAS_TILE_DMA() - case INT_DMATLB_MISS: - case INT_DMATLB_ACCESS: - case INT_DMATLB_MISS_DWNCL: - case INT_DMATLB_ACCESS_DWNCL: - async = ¤t->thread.dma_async_tlb; - break; -#endif - default: - async = NULL; - } - if (async) { - - /* - * No vmalloc check required, so we can allow - * interrupts immediately at this point. - */ - local_irq_enable(); - - set_thread_flag(TIF_ASYNC_TLB); - if (async->fault_num != 0) { - panic("Second async fault %d; old fault was %d (%#lx/%ld)", - fault_num, async->fault_num, - address, write); - } - BUG_ON(fault_num == 0); - async->fault_num = fault_num; - async->is_fault = is_page_fault; - async->is_write = write; - async->address = address; - return; - } - } -#endif - - handle_page_fault(regs, fault_num, is_page_fault, address, write); -} - -void do_page_fault(struct pt_regs *regs, int fault_num, - unsigned long address, unsigned long write) -{ - __do_page_fault(regs, fault_num, address, write); -} - -#if CHIP_HAS_TILE_DMA() -/* - * This routine effectively re-issues asynchronous page faults - * when we are returning to user space. - */ -void do_async_page_fault(struct pt_regs *regs) -{ - struct async_tlb *async = ¤t->thread.dma_async_tlb; - - /* - * Clear thread flag early. If we re-interrupt while processing - * code here, we will reset it and recall this routine before - * returning to user space. - */ - clear_thread_flag(TIF_ASYNC_TLB); - - if (async->fault_num) { - /* - * Clear async->fault_num before calling the page-fault - * handler so that if we re-interrupt before returning - * from the function we have somewhere to put the - * information from the new interrupt. - */ - int fault_num = async->fault_num; - async->fault_num = 0; - handle_page_fault(regs, fault_num, async->is_fault, - async->address, async->is_write); - } -} -#endif /* CHIP_HAS_TILE_DMA() */ - - -void vmalloc_sync_all(void) -{ -#ifdef __tilegx__ - /* Currently all L1 kernel pmd's are static and shared. */ - BUILD_BUG_ON(pgd_index(VMALLOC_END - PAGE_SIZE) != - pgd_index(VMALLOC_START)); -#else - /* - * Note that races in the updates of insync and start aren't - * problematic: insync can only get set bits added, and updates to - * start are only improving performance (without affecting correctness - * if undone). - */ - static DECLARE_BITMAP(insync, PTRS_PER_PGD); - static unsigned long start = PAGE_OFFSET; - unsigned long address; - - BUILD_BUG_ON(PAGE_OFFSET & ~PGDIR_MASK); - for (address = start; address >= PAGE_OFFSET; address += PGDIR_SIZE) { - if (!test_bit(pgd_index(address), insync)) { - unsigned long flags; - struct list_head *pos; - - spin_lock_irqsave(&pgd_lock, flags); - list_for_each(pos, &pgd_list) - if (!vmalloc_sync_one(list_to_pgd(pos), - address)) { - /* Must be at first entry in list. */ - BUG_ON(pos != pgd_list.next); - break; - } - spin_unlock_irqrestore(&pgd_lock, flags); - if (pos != pgd_list.next) - set_bit(pgd_index(address), insync); - } - if (address == start && test_bit(pgd_index(address), insync)) - start = address + PGDIR_SIZE; - } -#endif -} diff --git a/arch/tile/mm/highmem.c b/arch/tile/mm/highmem.c deleted file mode 100644 index eca28551b22d..000000000000 --- a/arch/tile/mm/highmem.c +++ /dev/null @@ -1,277 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/highmem.h> -#include <linux/module.h> -#include <linux/pagemap.h> -#include <asm/homecache.h> - -#define kmap_get_pte(vaddr) \ - pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)),\ - (vaddr)), (vaddr)) - - -void *kmap(struct page *page) -{ - void *kva; - unsigned long flags; - pte_t *ptep; - - might_sleep(); - if (!PageHighMem(page)) - return page_address(page); - kva = kmap_high(page); - - /* - * Rewrite the PTE under the lock. This ensures that the page - * is not currently migrating. - */ - ptep = kmap_get_pte((unsigned long)kva); - flags = homecache_kpte_lock(); - set_pte_at(&init_mm, kva, ptep, mk_pte(page, page_to_kpgprot(page))); - homecache_kpte_unlock(flags); - - return kva; -} -EXPORT_SYMBOL(kmap); - -void kunmap(struct page *page) -{ - if (in_interrupt()) - BUG(); - if (!PageHighMem(page)) - return; - kunmap_high(page); -} -EXPORT_SYMBOL(kunmap); - -/* - * Describe a single atomic mapping of a page on a given cpu at a - * given address, and allow it to be linked into a list. - */ -struct atomic_mapped_page { - struct list_head list; - struct page *page; - int cpu; - unsigned long va; -}; - -static spinlock_t amp_lock = __SPIN_LOCK_UNLOCKED(&_lock); -static struct list_head amp_list = LIST_HEAD_INIT(amp_list); - -/* - * Combining this structure with a per-cpu declaration lets us give - * each cpu an atomic_mapped_page structure per type. - */ -struct kmap_amps { - struct atomic_mapped_page per_type[KM_TYPE_NR]; -}; -static DEFINE_PER_CPU(struct kmap_amps, amps); - -/* - * Add a page and va, on this cpu, to the list of kmap_atomic pages, - * and write the new pte to memory. Writing the new PTE under the - * lock guarantees that it is either on the list before migration starts - * (if we won the race), or set_pte() sets the migrating bit in the PTE - * (if we lost the race). And doing it under the lock guarantees - * that when kmap_atomic_fix_one_pte() comes along, it finds a valid - * PTE in memory, iff the mapping is still on the amp_list. - * - * Finally, doing it under the lock lets us safely examine the page - * to see if it is immutable or not, for the generic kmap_atomic() case. - * If we examine it earlier we are exposed to a race where it looks - * writable earlier, but becomes immutable before we write the PTE. - */ -static void kmap_atomic_register(struct page *page, int type, - unsigned long va, pte_t *ptep, pte_t pteval) -{ - unsigned long flags; - struct atomic_mapped_page *amp; - - flags = homecache_kpte_lock(); - spin_lock(&_lock); - - /* With interrupts disabled, now fill in the per-cpu info. */ - amp = this_cpu_ptr(&s.per_type[type]); - amp->page = page; - amp->cpu = smp_processor_id(); - amp->va = va; - - /* For generic kmap_atomic(), choose the PTE writability now. */ - if (!pte_read(pteval)) - pteval = mk_pte(page, page_to_kpgprot(page)); - - list_add(&->list, &_list); - set_pte(ptep, pteval); - - spin_unlock(&_lock); - homecache_kpte_unlock(flags); -} - -/* - * Remove a page and va, on this cpu, from the list of kmap_atomic pages. - * Linear-time search, but we count on the lists being short. - * We don't need to adjust the PTE under the lock (as opposed to the - * kmap_atomic_register() case), since we're just unconditionally - * zeroing the PTE after it's off the list. - */ -static void kmap_atomic_unregister(struct page *page, unsigned long va) -{ - unsigned long flags; - struct atomic_mapped_page *amp; - int cpu = smp_processor_id(); - spin_lock_irqsave(&_lock, flags); - list_for_each_entry(amp, &_list, list) { - if (amp->page == page && amp->cpu == cpu && amp->va == va) - break; - } - BUG_ON(&->list == &_list); - list_del(&->list); - spin_unlock_irqrestore(&_lock, flags); -} - -/* Helper routine for kmap_atomic_fix_kpte(), below. */ -static void kmap_atomic_fix_one_kpte(struct atomic_mapped_page *amp, - int finished) -{ - pte_t *ptep = kmap_get_pte(amp->va); - if (!finished) { - set_pte(ptep, pte_mkmigrate(*ptep)); - flush_remote(0, 0, NULL, amp->va, PAGE_SIZE, PAGE_SIZE, - cpumask_of(amp->cpu), NULL, 0); - } else { - /* - * Rewrite a default kernel PTE for this page. - * We rely on the fact that set_pte() writes the - * present+migrating bits last. - */ - pte_t pte = mk_pte(amp->page, page_to_kpgprot(amp->page)); - set_pte(ptep, pte); - } -} - -/* - * This routine is a helper function for homecache_fix_kpte(); see - * its comments for more information on the "finished" argument here. - * - * Note that we hold the lock while doing the remote flushes, which - * will stall any unrelated cpus trying to do kmap_atomic operations. - * We could just update the PTEs under the lock, and save away copies - * of the structs (or just the va+cpu), then flush them after we - * release the lock, but it seems easier just to do it all under the lock. - */ -void kmap_atomic_fix_kpte(struct page *page, int finished) -{ - struct atomic_mapped_page *amp; - unsigned long flags; - spin_lock_irqsave(&_lock, flags); - list_for_each_entry(amp, &_list, list) { - if (amp->page == page) - kmap_atomic_fix_one_kpte(amp, finished); - } - spin_unlock_irqrestore(&_lock, flags); -} - -/* - * kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap - * because the kmap code must perform a global TLB invalidation when - * the kmap pool wraps. - * - * Note that they may be slower than on x86 (etc.) because unlike on - * those platforms, we do have to take a global lock to map and unmap - * pages on Tile (see above). - * - * When holding an atomic kmap is is not legal to sleep, so atomic - * kmaps are appropriate for short, tight code paths only. - */ -void *kmap_atomic_prot(struct page *page, pgprot_t prot) -{ - unsigned long vaddr; - int idx, type; - pte_t *pte; - - preempt_disable(); - pagefault_disable(); - - /* Avoid icache flushes by disallowing atomic executable mappings. */ - BUG_ON(pte_exec(prot)); - - if (!PageHighMem(page)) - return page_address(page); - - type = kmap_atomic_idx_push(); - idx = type + KM_TYPE_NR*smp_processor_id(); - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); - pte = kmap_get_pte(vaddr); - BUG_ON(!pte_none(*pte)); - - /* Register that this page is mapped atomically on this cpu. */ - kmap_atomic_register(page, type, vaddr, pte, mk_pte(page, prot)); - - return (void *)vaddr; -} -EXPORT_SYMBOL(kmap_atomic_prot); - -void *kmap_atomic(struct page *page) -{ - /* PAGE_NONE is a magic value that tells us to check immutability. */ - return kmap_atomic_prot(page, PAGE_NONE); -} -EXPORT_SYMBOL(kmap_atomic); - -void __kunmap_atomic(void *kvaddr) -{ - unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK; - - if (vaddr >= __fix_to_virt(FIX_KMAP_END) && - vaddr <= __fix_to_virt(FIX_KMAP_BEGIN)) { - pte_t *pte = kmap_get_pte(vaddr); - pte_t pteval = *pte; - int idx, type; - - type = kmap_atomic_idx(); - idx = type + KM_TYPE_NR*smp_processor_id(); - - /* - * Force other mappings to Oops if they try to access this pte - * without first remapping it. Keeping stale mappings around - * is a bad idea. - */ - BUG_ON(!pte_present(pteval) && !pte_migrating(pteval)); - kmap_atomic_unregister(pte_page(pteval), vaddr); - kpte_clear_flush(pte, vaddr); - kmap_atomic_idx_pop(); - } else { - /* Must be a lowmem page */ - BUG_ON(vaddr < PAGE_OFFSET); - BUG_ON(vaddr >= (unsigned long)high_memory); - } - - pagefault_enable(); - preempt_enable(); -} -EXPORT_SYMBOL(__kunmap_atomic); - -/* - * This API is supposed to allow us to map memory without a "struct page". - * Currently we don't support this, though this may change in the future. - */ -void *kmap_atomic_pfn(unsigned long pfn) -{ - return kmap_atomic(pfn_to_page(pfn)); -} -void *kmap_atomic_prot_pfn(unsigned long pfn, pgprot_t prot) -{ - return kmap_atomic_prot(pfn_to_page(pfn), prot); -} diff --git a/arch/tile/mm/homecache.c b/arch/tile/mm/homecache.c deleted file mode 100644 index 4432f31e8479..000000000000 --- a/arch/tile/mm/homecache.c +++ /dev/null @@ -1,428 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * This code maintains the "home" for each page in the system. - */ - -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/spinlock.h> -#include <linux/list.h> -#include <linux/bootmem.h> -#include <linux/rmap.h> -#include <linux/pagemap.h> -#include <linux/mutex.h> -#include <linux/interrupt.h> -#include <linux/sysctl.h> -#include <linux/pagevec.h> -#include <linux/ptrace.h> -#include <linux/timex.h> -#include <linux/cache.h> -#include <linux/smp.h> -#include <linux/module.h> -#include <linux/hugetlb.h> - -#include <asm/page.h> -#include <asm/sections.h> -#include <asm/tlbflush.h> -#include <asm/pgalloc.h> -#include <asm/homecache.h> - -#include <arch/sim.h> - -#include "migrate.h" - - -/* - * The noallocl2 option suppresses all use of the L2 cache to cache - * locally from a remote home. - */ -static int __ro_after_init noallocl2; -static int __init set_noallocl2(char *str) -{ - noallocl2 = 1; - return 0; -} -early_param("noallocl2", set_noallocl2); - - -/* - * Update the irq_stat for cpus that we are going to interrupt - * with TLB or cache flushes. Also handle removing dataplane cpus - * from the TLB flush set, and setting dataplane_tlb_state instead. - */ -static void hv_flush_update(const struct cpumask *cache_cpumask, - struct cpumask *tlb_cpumask, - unsigned long tlb_va, unsigned long tlb_length, - HV_Remote_ASID *asids, int asidcount) -{ - struct cpumask mask; - int i, cpu; - - cpumask_clear(&mask); - if (cache_cpumask) - cpumask_or(&mask, &mask, cache_cpumask); - if (tlb_cpumask && tlb_length) { - cpumask_or(&mask, &mask, tlb_cpumask); - } - - for (i = 0; i < asidcount; ++i) - cpumask_set_cpu(asids[i].y * smp_width + asids[i].x, &mask); - - /* - * Don't bother to update atomically; losing a count - * here is not that critical. - */ - for_each_cpu(cpu, &mask) - ++per_cpu(irq_stat, cpu).irq_hv_flush_count; -} - -/* - * This wrapper function around hv_flush_remote() does several things: - * - * - Provides a return value error-checking panic path, since - * there's never any good reason for hv_flush_remote() to fail. - * - Accepts a 32-bit PFN rather than a 64-bit PA, which generally - * is the type that Linux wants to pass around anyway. - * - Canonicalizes that lengths of zero make cpumasks NULL. - * - Handles deferring TLB flushes for dataplane tiles. - * - Tracks remote interrupts in the per-cpu irq_cpustat_t. - * - * Note that we have to wait until the cache flush completes before - * updating the per-cpu last_cache_flush word, since otherwise another - * concurrent flush can race, conclude the flush has already - * completed, and start to use the page while it's still dirty - * remotely (running concurrently with the actual evict, presumably). - */ -void flush_remote(unsigned long cache_pfn, unsigned long cache_control, - const struct cpumask *cache_cpumask_orig, - HV_VirtAddr tlb_va, unsigned long tlb_length, - unsigned long tlb_pgsize, - const struct cpumask *tlb_cpumask_orig, - HV_Remote_ASID *asids, int asidcount) -{ - int rc; - struct cpumask cache_cpumask_copy, tlb_cpumask_copy; - struct cpumask *cache_cpumask, *tlb_cpumask; - HV_PhysAddr cache_pa; - - mb(); /* provided just to simplify "magic hypervisor" mode */ - - /* - * Canonicalize and copy the cpumasks. - */ - if (cache_cpumask_orig && cache_control) { - cpumask_copy(&cache_cpumask_copy, cache_cpumask_orig); - cache_cpumask = &cache_cpumask_copy; - } else { - cpumask_clear(&cache_cpumask_copy); - cache_cpumask = NULL; - } - if (cache_cpumask == NULL) - cache_control = 0; - if (tlb_cpumask_orig && tlb_length) { - cpumask_copy(&tlb_cpumask_copy, tlb_cpumask_orig); - tlb_cpumask = &tlb_cpumask_copy; - } else { - cpumask_clear(&tlb_cpumask_copy); - tlb_cpumask = NULL; - } - - hv_flush_update(cache_cpumask, tlb_cpumask, tlb_va, tlb_length, - asids, asidcount); - cache_pa = (HV_PhysAddr)cache_pfn << PAGE_SHIFT; - rc = hv_flush_remote(cache_pa, cache_control, - cpumask_bits(cache_cpumask), - tlb_va, tlb_length, tlb_pgsize, - cpumask_bits(tlb_cpumask), - asids, asidcount); - if (rc == 0) - return; - - pr_err("hv_flush_remote(%#llx, %#lx, %p [%*pb], %#lx, %#lx, %#lx, %p [%*pb], %p, %d) = %d\n", - cache_pa, cache_control, cache_cpumask, - cpumask_pr_args(&cache_cpumask_copy), - (unsigned long)tlb_va, tlb_length, tlb_pgsize, tlb_cpumask, - cpumask_pr_args(&tlb_cpumask_copy), asids, asidcount, rc); - panic("Unsafe to continue."); -} - -static void homecache_finv_page_va(void* va, int home) -{ - int cpu = get_cpu(); - if (home == cpu) { - finv_buffer_local(va, PAGE_SIZE); - } else if (home == PAGE_HOME_HASH) { - finv_buffer_remote(va, PAGE_SIZE, 1); - } else { - BUG_ON(home < 0 || home >= NR_CPUS); - finv_buffer_remote(va, PAGE_SIZE, 0); - } - put_cpu(); -} - -void homecache_finv_map_page(struct page *page, int home) -{ - unsigned long flags; - unsigned long va; - pte_t *ptep; - pte_t pte; - - if (home == PAGE_HOME_UNCACHED) - return; - local_irq_save(flags); -#ifdef CONFIG_HIGHMEM - va = __fix_to_virt(FIX_KMAP_BEGIN + kmap_atomic_idx_push() + - (KM_TYPE_NR * smp_processor_id())); -#else - va = __fix_to_virt(FIX_HOMECACHE_BEGIN + smp_processor_id()); -#endif - ptep = virt_to_kpte(va); - pte = pfn_pte(page_to_pfn(page), PAGE_KERNEL); - __set_pte(ptep, pte_set_home(pte, home)); - homecache_finv_page_va((void *)va, home); - __pte_clear(ptep); - hv_flush_page(va, PAGE_SIZE); -#ifdef CONFIG_HIGHMEM - kmap_atomic_idx_pop(); -#endif - local_irq_restore(flags); -} - -static void homecache_finv_page_home(struct page *page, int home) -{ - if (!PageHighMem(page) && home == page_home(page)) - homecache_finv_page_va(page_address(page), home); - else - homecache_finv_map_page(page, home); -} - -static inline bool incoherent_home(int home) -{ - return home == PAGE_HOME_IMMUTABLE || home == PAGE_HOME_INCOHERENT; -} - -static void homecache_finv_page_internal(struct page *page, int force_map) -{ - int home = page_home(page); - if (home == PAGE_HOME_UNCACHED) - return; - if (incoherent_home(home)) { - int cpu; - for_each_cpu(cpu, &cpu_cacheable_map) - homecache_finv_map_page(page, cpu); - } else if (force_map) { - /* Force if, e.g., the normal mapping is migrating. */ - homecache_finv_map_page(page, home); - } else { - homecache_finv_page_home(page, home); - } - sim_validate_lines_evicted(PFN_PHYS(page_to_pfn(page)), PAGE_SIZE); -} - -void homecache_finv_page(struct page *page) -{ - homecache_finv_page_internal(page, 0); -} - -void homecache_evict(const struct cpumask *mask) -{ - flush_remote(0, HV_FLUSH_EVICT_L2, mask, 0, 0, 0, NULL, NULL, 0); -} - -/* Report the home corresponding to a given PTE. */ -static int pte_to_home(pte_t pte) -{ - if (hv_pte_get_nc(pte)) - return PAGE_HOME_IMMUTABLE; - switch (hv_pte_get_mode(pte)) { - case HV_PTE_MODE_CACHE_TILE_L3: - return get_remote_cache_cpu(pte); - case HV_PTE_MODE_CACHE_NO_L3: - return PAGE_HOME_INCOHERENT; - case HV_PTE_MODE_UNCACHED: - return PAGE_HOME_UNCACHED; - case HV_PTE_MODE_CACHE_HASH_L3: - return PAGE_HOME_HASH; - } - panic("Bad PTE %#llx\n", pte.val); -} - -/* Update the home of a PTE if necessary (can also be used for a pgprot_t). */ -pte_t pte_set_home(pte_t pte, int home) -{ -#if CHIP_HAS_MMIO() - /* Check for MMIO mappings and pass them through. */ - if (hv_pte_get_mode(pte) == HV_PTE_MODE_MMIO) - return pte; -#endif - - - /* - * Only immutable pages get NC mappings. If we have a - * non-coherent PTE, but the underlying page is not - * immutable, it's likely the result of a forced - * caching setting running up against ptrace setting - * the page to be writable underneath. In this case, - * just keep the PTE coherent. - */ - if (hv_pte_get_nc(pte) && home != PAGE_HOME_IMMUTABLE) { - pte = hv_pte_clear_nc(pte); - pr_err("non-immutable page incoherently referenced: %#llx\n", - pte.val); - } - - switch (home) { - - case PAGE_HOME_UNCACHED: - pte = hv_pte_set_mode(pte, HV_PTE_MODE_UNCACHED); - break; - - case PAGE_HOME_INCOHERENT: - pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_NO_L3); - break; - - case PAGE_HOME_IMMUTABLE: - /* - * We could home this page anywhere, since it's immutable, - * but by default just home it to follow "hash_default". - */ - BUG_ON(hv_pte_get_writable(pte)); - if (pte_get_forcecache(pte)) { - /* Upgrade "force any cpu" to "No L3" for immutable. */ - if (hv_pte_get_mode(pte) == HV_PTE_MODE_CACHE_TILE_L3 - && pte_get_anyhome(pte)) { - pte = hv_pte_set_mode(pte, - HV_PTE_MODE_CACHE_NO_L3); - } - } else - if (hash_default) - pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_HASH_L3); - else - pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_NO_L3); - pte = hv_pte_set_nc(pte); - break; - - case PAGE_HOME_HASH: - pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_HASH_L3); - break; - - default: - BUG_ON(home < 0 || home >= NR_CPUS || - !cpu_is_valid_lotar(home)); - pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_TILE_L3); - pte = set_remote_cache_cpu(pte, home); - break; - } - - if (noallocl2) - pte = hv_pte_set_no_alloc_l2(pte); - - /* Simplify "no local and no l3" to "uncached" */ - if (hv_pte_get_no_alloc_l2(pte) && hv_pte_get_no_alloc_l1(pte) && - hv_pte_get_mode(pte) == HV_PTE_MODE_CACHE_NO_L3) { - pte = hv_pte_set_mode(pte, HV_PTE_MODE_UNCACHED); - } - - /* Checking this case here gives a better panic than from the hv. */ - BUG_ON(hv_pte_get_mode(pte) == 0); - - return pte; -} -EXPORT_SYMBOL(pte_set_home); - -/* - * The routines in this section are the "static" versions of the normal - * dynamic homecaching routines; they just set the home cache - * of a kernel page once, and require a full-chip cache/TLB flush, - * so they're not suitable for anything but infrequent use. - */ - -int page_home(struct page *page) -{ - if (PageHighMem(page)) { - return PAGE_HOME_HASH; - } else { - unsigned long kva = (unsigned long)page_address(page); - return pte_to_home(*virt_to_kpte(kva)); - } -} -EXPORT_SYMBOL(page_home); - -void homecache_change_page_home(struct page *page, int order, int home) -{ - int i, pages = (1 << order); - unsigned long kva; - - BUG_ON(PageHighMem(page)); - BUG_ON(page_count(page) > 1); - BUG_ON(page_mapcount(page) != 0); - kva = (unsigned long) page_address(page); - flush_remote(0, HV_FLUSH_EVICT_L2, &cpu_cacheable_map, - kva, pages * PAGE_SIZE, PAGE_SIZE, cpu_online_mask, - NULL, 0); - - for (i = 0; i < pages; ++i, kva += PAGE_SIZE) { - pte_t *ptep = virt_to_kpte(kva); - pte_t pteval = *ptep; - BUG_ON(!pte_present(pteval) || pte_huge(pteval)); - __set_pte(ptep, pte_set_home(pteval, home)); - } -} -EXPORT_SYMBOL(homecache_change_page_home); - -struct page *homecache_alloc_pages(gfp_t gfp_mask, - unsigned int order, int home) -{ - struct page *page; - BUG_ON(gfp_mask & __GFP_HIGHMEM); /* must be lowmem */ - page = alloc_pages(gfp_mask, order); - if (page) - homecache_change_page_home(page, order, home); - return page; -} -EXPORT_SYMBOL(homecache_alloc_pages); - -struct page *homecache_alloc_pages_node(int nid, gfp_t gfp_mask, - unsigned int order, int home) -{ - struct page *page; - BUG_ON(gfp_mask & __GFP_HIGHMEM); /* must be lowmem */ - page = alloc_pages_node(nid, gfp_mask, order); - if (page) - homecache_change_page_home(page, order, home); - return page; -} - -void __homecache_free_pages(struct page *page, unsigned int order) -{ - if (put_page_testzero(page)) { - homecache_change_page_home(page, order, PAGE_HOME_HASH); - if (order == 0) { - free_unref_page(page); - } else { - init_page_count(page); - __free_pages(page, order); - } - } -} -EXPORT_SYMBOL(__homecache_free_pages); - -void homecache_free_pages(unsigned long addr, unsigned int order) -{ - if (addr != 0) { - VM_BUG_ON(!virt_addr_valid((void *)addr)); - __homecache_free_pages(virt_to_page((void *)addr), order); - } -} -EXPORT_SYMBOL(homecache_free_pages); diff --git a/arch/tile/mm/hugetlbpage.c b/arch/tile/mm/hugetlbpage.c deleted file mode 100644 index 0986d426a413..000000000000 --- a/arch/tile/mm/hugetlbpage.c +++ /dev/null @@ -1,348 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * TILE Huge TLB Page Support for Kernel. - * Taken from i386 hugetlb implementation: - * Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com> - */ - -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/mm.h> -#include <linux/sched/mm.h> -#include <linux/hugetlb.h> -#include <linux/pagemap.h> -#include <linux/slab.h> -#include <linux/err.h> -#include <linux/sysctl.h> -#include <linux/mman.h> -#include <asm/tlb.h> -#include <asm/tlbflush.h> -#include <asm/setup.h> - -#ifdef CONFIG_HUGETLB_SUPER_PAGES - -/* - * Provide an additional huge page size (in addition to the regular default - * huge page size) if no "hugepagesz" arguments are specified. - * Note that it must be smaller than the default huge page size so - * that it's possible to allocate them on demand from the buddy allocator. - * You can change this to 64K (on a 16K build), 256K, 1M, or 4M, - * or not define it at all. - */ -#define ADDITIONAL_HUGE_SIZE (1024 * 1024UL) - -/* "Extra" page-size multipliers, one per level of the page table. */ -int huge_shift[HUGE_SHIFT_ENTRIES] = { -#ifdef ADDITIONAL_HUGE_SIZE -#define ADDITIONAL_HUGE_SHIFT __builtin_ctzl(ADDITIONAL_HUGE_SIZE / PAGE_SIZE) - [HUGE_SHIFT_PAGE] = ADDITIONAL_HUGE_SHIFT -#endif -}; - -#endif - -pte_t *huge_pte_alloc(struct mm_struct *mm, - unsigned long addr, unsigned long sz) -{ - pgd_t *pgd; - pud_t *pud; - - addr &= -sz; /* Mask off any low bits in the address. */ - - pgd = pgd_offset(mm, addr); - pud = pud_alloc(mm, pgd, addr); - -#ifdef CONFIG_HUGETLB_SUPER_PAGES - if (sz >= PGDIR_SIZE) { - BUG_ON(sz != PGDIR_SIZE && - sz != PGDIR_SIZE << huge_shift[HUGE_SHIFT_PGDIR]); - return (pte_t *)pud; - } else { - pmd_t *pmd = pmd_alloc(mm, pud, addr); - if (sz >= PMD_SIZE) { - BUG_ON(sz != PMD_SIZE && - sz != (PMD_SIZE << huge_shift[HUGE_SHIFT_PMD])); - return (pte_t *)pmd; - } - else { - if (sz != PAGE_SIZE << huge_shift[HUGE_SHIFT_PAGE]) - panic("Unexpected page size %#lx\n", sz); - return pte_alloc_map(mm, pmd, addr); - } - } -#else - BUG_ON(sz != PMD_SIZE); - return (pte_t *) pmd_alloc(mm, pud, addr); -#endif -} - -static pte_t *get_pte(pte_t *base, int index, int level) -{ - pte_t *ptep = base + index; -#ifdef CONFIG_HUGETLB_SUPER_PAGES - if (!pte_present(*ptep) && huge_shift[level] != 0) { - unsigned long mask = -1UL << huge_shift[level]; - pte_t *super_ptep = base + (index & mask); - pte_t pte = *super_ptep; - if (pte_present(pte) && pte_super(pte)) - ptep = super_ptep; - } -#endif - return ptep; -} - -pte_t *huge_pte_offset(struct mm_struct *mm, - unsigned long addr, unsigned long sz) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; -#ifdef CONFIG_HUGETLB_SUPER_PAGES - pte_t *pte; -#endif - - /* Get the top-level page table entry. */ - pgd = (pgd_t *)get_pte((pte_t *)mm->pgd, pgd_index(addr), 0); - - /* We don't have four levels. */ - pud = pud_offset(pgd, addr); -#ifndef __PAGETABLE_PUD_FOLDED -# error support fourth page table level -#endif - if (!pud_present(*pud)) - return NULL; - - /* Check for an L0 huge PTE, if we have three levels. */ -#ifndef __PAGETABLE_PMD_FOLDED - if (pud_huge(*pud)) - return (pte_t *)pud; - - pmd = (pmd_t *)get_pte((pte_t *)pud_page_vaddr(*pud), - pmd_index(addr), 1); - if (!pmd_present(*pmd)) - return NULL; -#else - pmd = pmd_offset(pud, addr); -#endif - - /* Check for an L1 huge PTE. */ - if (pmd_huge(*pmd)) - return (pte_t *)pmd; - -#ifdef CONFIG_HUGETLB_SUPER_PAGES - /* Check for an L2 huge PTE. */ - pte = get_pte((pte_t *)pmd_page_vaddr(*pmd), pte_index(addr), 2); - if (!pte_present(*pte)) - return NULL; - if (pte_super(*pte)) - return pte; -#endif - - return NULL; -} - -int pmd_huge(pmd_t pmd) -{ - return !!(pmd_val(pmd) & _PAGE_HUGE_PAGE); -} - -int pud_huge(pud_t pud) -{ - return !!(pud_val(pud) & _PAGE_HUGE_PAGE); -} - -#ifdef HAVE_ARCH_HUGETLB_UNMAPPED_AREA -static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file, - unsigned long addr, unsigned long len, - unsigned long pgoff, unsigned long flags) -{ - struct hstate *h = hstate_file(file); - struct vm_unmapped_area_info info; - - info.flags = 0; - info.length = len; - info.low_limit = TASK_UNMAPPED_BASE; - info.high_limit = TASK_SIZE; - info.align_mask = PAGE_MASK & ~huge_page_mask(h); - info.align_offset = 0; - return vm_unmapped_area(&info); -} - -static unsigned long hugetlb_get_unmapped_area_topdown(struct file *file, - unsigned long addr0, unsigned long len, - unsigned long pgoff, unsigned long flags) -{ - struct hstate *h = hstate_file(file); - struct vm_unmapped_area_info info; - unsigned long addr; - - info.flags = VM_UNMAPPED_AREA_TOPDOWN; - info.length = len; - info.low_limit = PAGE_SIZE; - info.high_limit = current->mm->mmap_base; - info.align_mask = PAGE_MASK & ~huge_page_mask(h); - info.align_offset = 0; - addr = vm_unmapped_area(&info); - - /* - * A failed mmap() very likely causes application failure, - * so fall back to the bottom-up function here. This scenario - * can happen with large stack limits and large mmap() - * allocations. - */ - if (addr & ~PAGE_MASK) { - VM_BUG_ON(addr != -ENOMEM); - info.flags = 0; - info.low_limit = TASK_UNMAPPED_BASE; - info.high_limit = TASK_SIZE; - addr = vm_unmapped_area(&info); - } - - return addr; -} - -unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, - unsigned long len, unsigned long pgoff, unsigned long flags) -{ - struct hstate *h = hstate_file(file); - struct mm_struct *mm = current->mm; - struct vm_area_struct *vma; - - if (len & ~huge_page_mask(h)) - return -EINVAL; - if (len > TASK_SIZE) - return -ENOMEM; - - if (flags & MAP_FIXED) { - if (prepare_hugepage_range(file, addr, len)) - return -EINVAL; - return addr; - } - - if (addr) { - addr = ALIGN(addr, huge_page_size(h)); - vma = find_vma(mm, addr); - if (TASK_SIZE - len >= addr && - (!vma || addr + len <= vm_start_gap(vma))) - return addr; - } - if (current->mm->get_unmapped_area == arch_get_unmapped_area) - return hugetlb_get_unmapped_area_bottomup(file, addr, len, - pgoff, flags); - else - return hugetlb_get_unmapped_area_topdown(file, addr, len, - pgoff, flags); -} -#endif /* HAVE_ARCH_HUGETLB_UNMAPPED_AREA */ - -#ifdef CONFIG_HUGETLB_SUPER_PAGES -static __init int __setup_hugepagesz(unsigned long ps) -{ - int log_ps = __builtin_ctzl(ps); - int level, base_shift; - - if ((1UL << log_ps) != ps || (log_ps & 1) != 0) { - pr_warn("Not enabling %ld byte huge pages; must be a power of four\n", - ps); - return -EINVAL; - } - - if (ps > 64*1024*1024*1024UL) { - pr_warn("Not enabling %ld MB huge pages; largest legal value is 64 GB\n", - ps >> 20); - return -EINVAL; - } else if (ps >= PUD_SIZE) { - static long hv_jpage_size; - if (hv_jpage_size == 0) - hv_jpage_size = hv_sysconf(HV_SYSCONF_PAGE_SIZE_JUMBO); - if (hv_jpage_size != PUD_SIZE) { - pr_warn("Not enabling >= %ld MB huge pages: hypervisor reports size %ld\n", - PUD_SIZE >> 20, hv_jpage_size); - return -EINVAL; - } - level = 0; - base_shift = PUD_SHIFT; - } else if (ps >= PMD_SIZE) { - level = 1; - base_shift = PMD_SHIFT; - } else if (ps > PAGE_SIZE) { - level = 2; - base_shift = PAGE_SHIFT; - } else { - pr_err("hugepagesz: huge page size %ld too small\n", ps); - return -EINVAL; - } - - if (log_ps != base_shift) { - int shift_val = log_ps - base_shift; - if (huge_shift[level] != 0) { - int old_shift = base_shift + huge_shift[level]; - pr_warn("Not enabling %ld MB huge pages; already have size %ld MB\n", - ps >> 20, (1UL << old_shift) >> 20); - return -EINVAL; - } - if (hv_set_pte_super_shift(level, shift_val) != 0) { - pr_warn("Not enabling %ld MB huge pages; no hypervisor support\n", - ps >> 20); - return -EINVAL; - } - printk(KERN_DEBUG "Enabled %ld MB huge pages\n", ps >> 20); - huge_shift[level] = shift_val; - } - - hugetlb_add_hstate(log_ps - PAGE_SHIFT); - - return 0; -} - -static bool saw_hugepagesz; - -static __init int setup_hugepagesz(char *opt) -{ - int rc; - - if (!saw_hugepagesz) { - saw_hugepagesz = true; - memset(huge_shift, 0, sizeof(huge_shift)); - } - rc = __setup_hugepagesz(memparse(opt, NULL)); - if (rc) - hugetlb_bad_size(); - return rc; -} -__setup("hugepagesz=", setup_hugepagesz); - -#ifdef ADDITIONAL_HUGE_SIZE -/* - * Provide an additional huge page size if no "hugepagesz" args are given. - * In that case, all the cores have properly set up their hv super_shift - * already, but we need to notify the hugetlb code to enable the - * new huge page size from the Linux point of view. - */ -static __init int add_default_hugepagesz(void) -{ - if (!saw_hugepagesz) { - BUILD_BUG_ON(ADDITIONAL_HUGE_SIZE >= PMD_SIZE || - ADDITIONAL_HUGE_SIZE <= PAGE_SIZE); - BUILD_BUG_ON((PAGE_SIZE << ADDITIONAL_HUGE_SHIFT) != - ADDITIONAL_HUGE_SIZE); - BUILD_BUG_ON(ADDITIONAL_HUGE_SHIFT & 1); - hugetlb_add_hstate(ADDITIONAL_HUGE_SHIFT); - } - return 0; -} -arch_initcall(add_default_hugepagesz); -#endif - -#endif /* CONFIG_HUGETLB_SUPER_PAGES */ diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c deleted file mode 100644 index 5f757e04bcd2..000000000000 --- a/arch/tile/mm/init.c +++ /dev/null @@ -1,956 +0,0 @@ -/* - * Copyright (C) 1995 Linus Torvalds - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/ptrace.h> -#include <linux/mman.h> -#include <linux/mm.h> -#include <linux/hugetlb.h> -#include <linux/swap.h> -#include <linux/smp.h> -#include <linux/init.h> -#include <linux/highmem.h> -#include <linux/pagemap.h> -#include <linux/poison.h> -#include <linux/bootmem.h> -#include <linux/slab.h> -#include <linux/proc_fs.h> -#include <linux/efi.h> -#include <linux/memory_hotplug.h> -#include <linux/uaccess.h> -#include <asm/mmu_context.h> -#include <asm/processor.h> -#include <asm/pgtable.h> -#include <asm/pgalloc.h> -#include <asm/dma.h> -#include <asm/fixmap.h> -#include <asm/tlb.h> -#include <asm/tlbflush.h> -#include <asm/sections.h> -#include <asm/setup.h> -#include <asm/homecache.h> -#include <hv/hypervisor.h> -#include <arch/chip.h> - -#include "migrate.h" - -#define clear_pgd(pmdptr) (*(pmdptr) = hv_pte(0)) - -#ifndef __tilegx__ -unsigned long VMALLOC_RESERVE = CONFIG_VMALLOC_RESERVE; -EXPORT_SYMBOL(VMALLOC_RESERVE); -#endif - -/* Create an L2 page table */ -static pte_t * __init alloc_pte(void) -{ - return __alloc_bootmem(L2_KERNEL_PGTABLE_SIZE, HV_PAGE_TABLE_ALIGN, 0); -} - -/* - * L2 page tables per controller. We allocate these all at once from - * the bootmem allocator and store them here. This saves on kernel L2 - * page table memory, compared to allocating a full 64K page per L2 - * page table, and also means that in cases where we use huge pages, - * we are guaranteed to later be able to shatter those huge pages and - * switch to using these page tables instead, without requiring - * further allocation. Each l2_ptes[] entry points to the first page - * table for the first hugepage-size piece of memory on the - * controller; other page tables are just indexed directly, i.e. the - * L2 page tables are contiguous in memory for each controller. - */ -static pte_t *l2_ptes[MAX_NUMNODES]; -static int num_l2_ptes[MAX_NUMNODES]; - -static void init_prealloc_ptes(int node, int pages) -{ - BUG_ON(pages & (PTRS_PER_PTE - 1)); - if (pages) { - num_l2_ptes[node] = pages; - l2_ptes[node] = __alloc_bootmem(pages * sizeof(pte_t), - HV_PAGE_TABLE_ALIGN, 0); - } -} - -pte_t *get_prealloc_pte(unsigned long pfn) -{ - int node = pfn_to_nid(pfn); - pfn &= ~(-1UL << (NR_PA_HIGHBIT_SHIFT - PAGE_SHIFT)); - BUG_ON(node >= MAX_NUMNODES); - BUG_ON(pfn >= num_l2_ptes[node]); - return &l2_ptes[node][pfn]; -} - -/* - * What caching do we expect pages from the heap to have when - * they are allocated during bootup? (Once we've installed the - * "real" swapper_pg_dir.) - */ -static int initial_heap_home(void) -{ - if (hash_default) - return PAGE_HOME_HASH; - return smp_processor_id(); -} - -/* - * Place a pointer to an L2 page table in a middle page - * directory entry. - */ -static void __init assign_pte(pmd_t *pmd, pte_t *page_table) -{ - phys_addr_t pa = __pa(page_table); - unsigned long l2_ptfn = pa >> HV_LOG2_PAGE_TABLE_ALIGN; - pte_t pteval = hv_pte_set_ptfn(__pgprot(_PAGE_TABLE), l2_ptfn); - BUG_ON((pa & (HV_PAGE_TABLE_ALIGN-1)) != 0); - pteval = pte_set_home(pteval, initial_heap_home()); - *(pte_t *)pmd = pteval; - if (page_table != (pte_t *)pmd_page_vaddr(*pmd)) - BUG(); -} - -#ifdef __tilegx__ - -static inline pmd_t *alloc_pmd(void) -{ - return __alloc_bootmem(L1_KERNEL_PGTABLE_SIZE, HV_PAGE_TABLE_ALIGN, 0); -} - -static inline void assign_pmd(pud_t *pud, pmd_t *pmd) -{ - assign_pte((pmd_t *)pud, (pte_t *)pmd); -} - -#endif /* __tilegx__ */ - -/* Replace the given pmd with a full PTE table. */ -void __init shatter_pmd(pmd_t *pmd) -{ - pte_t *pte = get_prealloc_pte(pte_pfn(*(pte_t *)pmd)); - assign_pte(pmd, pte); -} - -#ifdef __tilegx__ -static pmd_t *__init get_pmd(pgd_t pgtables[], unsigned long va) -{ - pud_t *pud = pud_offset(&pgtables[pgd_index(va)], va); - if (pud_none(*pud)) - assign_pmd(pud, alloc_pmd()); - return pmd_offset(pud, va); -} -#else -static pmd_t *__init get_pmd(pgd_t pgtables[], unsigned long va) -{ - return pmd_offset(pud_offset(&pgtables[pgd_index(va)], va), va); -} -#endif - -/* - * This function initializes a certain range of kernel virtual memory - * with new bootmem page tables, everywhere page tables are missing in - * the given range. - */ - -/* - * NOTE: The pagetables are allocated contiguous on the physical space - * so we can cache the place of the first one and move around without - * checking the pgd every time. - */ -static void __init page_table_range_init(unsigned long start, - unsigned long end, pgd_t *pgd) -{ - unsigned long vaddr; - start = round_down(start, PMD_SIZE); - end = round_up(end, PMD_SIZE); - for (vaddr = start; vaddr < end; vaddr += PMD_SIZE) { - pmd_t *pmd = get_pmd(pgd, vaddr); - if (pmd_none(*pmd)) - assign_pte(pmd, alloc_pte()); - } -} - - -static int __initdata ktext_hash = 1; /* .text pages */ -static int __initdata kdata_hash = 1; /* .data and .bss pages */ -int __ro_after_init hash_default = 1; /* kernel allocator pages */ -EXPORT_SYMBOL(hash_default); -int __ro_after_init kstack_hash = 1; /* if no homecaching, use h4h */ - -/* - * CPUs to use to for striping the pages of kernel data. If hash-for-home - * is available, this is only relevant if kcache_hash sets up the - * .data and .bss to be page-homed, and we don't want the default mode - * of using the full set of kernel cpus for the striping. - */ -static __initdata struct cpumask kdata_mask; -static __initdata int kdata_arg_seen; - -int __ro_after_init kdata_huge; /* if no homecaching, small pages */ - - -/* Combine a generic pgprot_t with cache home to get a cache-aware pgprot. */ -static pgprot_t __init construct_pgprot(pgprot_t prot, int home) -{ - prot = pte_set_home(prot, home); - if (home == PAGE_HOME_IMMUTABLE) { - if (ktext_hash) - prot = hv_pte_set_mode(prot, HV_PTE_MODE_CACHE_HASH_L3); - else - prot = hv_pte_set_mode(prot, HV_PTE_MODE_CACHE_NO_L3); - } - return prot; -} - -/* - * For a given kernel data VA, how should it be cached? - * We return the complete pgprot_t with caching bits set. - */ -static pgprot_t __init init_pgprot(ulong address) -{ - int cpu; - unsigned long page; - enum { CODE_DELTA = MEM_SV_START - PAGE_OFFSET }; - - /* For kdata=huge, everything is just hash-for-home. */ - if (kdata_huge) - return construct_pgprot(PAGE_KERNEL, PAGE_HOME_HASH); - - /* - * We map the aliased pages of permanent text so we can - * update them if necessary, for ftrace, etc. - */ - if (address < (ulong) _sinittext - CODE_DELTA) - return construct_pgprot(PAGE_KERNEL, PAGE_HOME_HASH); - - /* We map read-only data non-coherent for performance. */ - if ((address >= (ulong) __start_rodata && - address < (ulong) __end_rodata) || - address == (ulong) empty_zero_page) { - return construct_pgprot(PAGE_KERNEL_RO, PAGE_HOME_IMMUTABLE); - } - -#ifndef __tilegx__ - /* Force the atomic_locks[] array page to be hash-for-home. */ - if (address == (ulong) atomic_locks) - return construct_pgprot(PAGE_KERNEL, PAGE_HOME_HASH); -#endif - - /* - * Everything else that isn't data or bss is heap, so mark it - * with the initial heap home (hash-for-home, or this cpu). This - * includes any addresses after the loaded image and any address before - * __init_end, since we already captured the case of text before - * _sinittext, and __pa(einittext) is approximately __pa(__init_begin). - * - * All the LOWMEM pages that we mark this way will get their - * struct page homecache properly marked later, in set_page_homes(). - * The HIGHMEM pages we leave with a default zero for their - * homes, but with a zero free_time we don't have to actually - * do a flush action the first time we use them, either. - */ - if (address >= (ulong) _end || address < (ulong) __init_end) - return construct_pgprot(PAGE_KERNEL, initial_heap_home()); - - /* Use hash-for-home if requested for data/bss. */ - if (kdata_hash) - return construct_pgprot(PAGE_KERNEL, PAGE_HOME_HASH); - - /* - * Otherwise we just hand out consecutive cpus. To avoid - * requiring this function to hold state, we just walk forward from - * __end_rodata by PAGE_SIZE, skipping the readonly and init data, to - * reach the requested address, while walking cpu home around - * kdata_mask. This is typically no more than a dozen or so iterations. - */ - page = (((ulong)__end_rodata) + PAGE_SIZE - 1) & PAGE_MASK; - BUG_ON(address < page || address >= (ulong)_end); - cpu = cpumask_first(&kdata_mask); - for (; page < address; page += PAGE_SIZE) { - if (page >= (ulong)&init_thread_union && - page < (ulong)&init_thread_union + THREAD_SIZE) - continue; - if (page == (ulong)empty_zero_page) - continue; -#ifndef __tilegx__ - if (page == (ulong)atomic_locks) - continue; -#endif - cpu = cpumask_next(cpu, &kdata_mask); - if (cpu == NR_CPUS) - cpu = cpumask_first(&kdata_mask); - } - return construct_pgprot(PAGE_KERNEL, cpu); -} - -/* - * This function sets up how we cache the kernel text. If we have - * hash-for-home support, normally that is used instead (see the - * kcache_hash boot flag for more information). But if we end up - * using a page-based caching technique, this option sets up the - * details of that. In addition, the "ktext=nocache" option may - * always be used to disable local caching of text pages, if desired. - */ - -static int __initdata ktext_arg_seen; -static int __initdata ktext_small; -static int __initdata ktext_local; -static int __initdata ktext_all; -static int __initdata ktext_nondataplane; -static int __initdata ktext_nocache; -static struct cpumask __initdata ktext_mask; - -static int __init setup_ktext(char *str) -{ - if (str == NULL) - return -EINVAL; - - /* If you have a leading "nocache", turn off ktext caching */ - if (strncmp(str, "nocache", 7) == 0) { - ktext_nocache = 1; - pr_info("ktext: disabling local caching of kernel text\n"); - str += 7; - if (*str == ',') - ++str; - if (*str == '\0') - return 0; - } - - ktext_arg_seen = 1; - - /* Default setting: use a huge page */ - if (strcmp(str, "huge") == 0) - pr_info("ktext: using one huge locally cached page\n"); - - /* Pay TLB cost but get no cache benefit: cache small pages locally */ - else if (strcmp(str, "local") == 0) { - ktext_small = 1; - ktext_local = 1; - pr_info("ktext: using small pages with local caching\n"); - } - - /* Neighborhood cache ktext pages on all cpus. */ - else if (strcmp(str, "all") == 0) { - ktext_small = 1; - ktext_all = 1; - pr_info("ktext: using maximal caching neighborhood\n"); - } - - - /* Neighborhood ktext pages on specified mask */ - else if (cpulist_parse(str, &ktext_mask) == 0) { - if (cpumask_weight(&ktext_mask) > 1) { - ktext_small = 1; - pr_info("ktext: using caching neighborhood %*pbl with small pages\n", - cpumask_pr_args(&ktext_mask)); - } else { - pr_info("ktext: caching on cpu %*pbl with one huge page\n", - cpumask_pr_args(&ktext_mask)); - } - } - - else if (*str) - return -EINVAL; - - return 0; -} - -early_param("ktext", setup_ktext); - - -static inline pgprot_t ktext_set_nocache(pgprot_t prot) -{ - if (!ktext_nocache) - prot = hv_pte_set_nc(prot); - else - prot = hv_pte_set_no_alloc_l2(prot); - return prot; -} - -/* Temporary page table we use for staging. */ -static pgd_t pgtables[PTRS_PER_PGD] - __attribute__((aligned(HV_PAGE_TABLE_ALIGN))); - -/* - * This maps the physical memory to kernel virtual address space, a total - * of max_low_pfn pages, by creating page tables starting from address - * PAGE_OFFSET. - * - * This routine transitions us from using a set of compiled-in large - * pages to using some more precise caching, including removing access - * to code pages mapped at PAGE_OFFSET (executed only at MEM_SV_START) - * marking read-only data as locally cacheable, striping the remaining - * .data and .bss across all the available tiles, and removing access - * to pages above the top of RAM (thus ensuring a page fault from a bad - * virtual address rather than a hypervisor shoot down for accessing - * memory outside the assigned limits). - */ -static void __init kernel_physical_mapping_init(pgd_t *pgd_base) -{ - unsigned long long irqmask; - unsigned long address, pfn; - pmd_t *pmd; - pte_t *pte; - int pte_ofs; - const struct cpumask *my_cpu_mask = cpumask_of(smp_processor_id()); - struct cpumask kstripe_mask; - int rc, i; - - if (ktext_arg_seen && ktext_hash) { - pr_warn("warning: \"ktext\" boot argument ignored if \"kcache_hash\" sets up text hash-for-home\n"); - ktext_small = 0; - } - - if (kdata_arg_seen && kdata_hash) { - pr_warn("warning: \"kdata\" boot argument ignored if \"kcache_hash\" sets up data hash-for-home\n"); - } - - if (kdata_huge && !hash_default) { - pr_warn("warning: disabling \"kdata=huge\"; requires kcache_hash=all or =allbutstack\n"); - kdata_huge = 0; - } - - /* - * Set up a mask for cpus to use for kernel striping. - * This is normally all cpus, but minus dataplane cpus if any. - * If the dataplane covers the whole chip, we stripe over - * the whole chip too. - */ - cpumask_copy(&kstripe_mask, cpu_possible_mask); - if (!kdata_arg_seen) - kdata_mask = kstripe_mask; - - /* Allocate and fill in L2 page tables */ - for (i = 0; i < MAX_NUMNODES; ++i) { -#ifdef CONFIG_HIGHMEM - unsigned long end_pfn = node_lowmem_end_pfn[i]; -#else - unsigned long end_pfn = node_end_pfn[i]; -#endif - unsigned long end_huge_pfn = 0; - - /* Pre-shatter the last huge page to allow per-cpu pages. */ - if (kdata_huge) - end_huge_pfn = end_pfn - (HPAGE_SIZE >> PAGE_SHIFT); - - pfn = node_start_pfn[i]; - - /* Allocate enough memory to hold L2 page tables for node. */ - init_prealloc_ptes(i, end_pfn - pfn); - - address = (unsigned long) pfn_to_kaddr(pfn); - while (pfn < end_pfn) { - BUG_ON(address & (HPAGE_SIZE-1)); - pmd = get_pmd(pgtables, address); - pte = get_prealloc_pte(pfn); - if (pfn < end_huge_pfn) { - pgprot_t prot = init_pgprot(address); - *(pte_t *)pmd = pte_mkhuge(pfn_pte(pfn, prot)); - for (pte_ofs = 0; pte_ofs < PTRS_PER_PTE; - pfn++, pte_ofs++, address += PAGE_SIZE) - pte[pte_ofs] = pfn_pte(pfn, prot); - } else { - if (kdata_huge) - printk(KERN_DEBUG "pre-shattered huge page at %#lx\n", - address); - for (pte_ofs = 0; pte_ofs < PTRS_PER_PTE; - pfn++, pte_ofs++, address += PAGE_SIZE) { - pgprot_t prot = init_pgprot(address); - pte[pte_ofs] = pfn_pte(pfn, prot); - } - assign_pte(pmd, pte); - } - } - } - - /* - * Set or check ktext_map now that we have cpu_possible_mask - * and kstripe_mask to work with. - */ - if (ktext_all) - cpumask_copy(&ktext_mask, cpu_possible_mask); - else if (ktext_nondataplane) - ktext_mask = kstripe_mask; - else if (!cpumask_empty(&ktext_mask)) { - /* Sanity-check any mask that was requested */ - struct cpumask bad; - cpumask_andnot(&bad, &ktext_mask, cpu_possible_mask); - cpumask_and(&ktext_mask, &ktext_mask, cpu_possible_mask); - if (!cpumask_empty(&bad)) - pr_info("ktext: not using unavailable cpus %*pbl\n", - cpumask_pr_args(&bad)); - if (cpumask_empty(&ktext_mask)) { - pr_warn("ktext: no valid cpus; caching on %d\n", - smp_processor_id()); - cpumask_copy(&ktext_mask, - cpumask_of(smp_processor_id())); - } - } - - address = MEM_SV_START; - pmd = get_pmd(pgtables, address); - pfn = 0; /* code starts at PA 0 */ - if (ktext_small) { - /* Allocate an L2 PTE for the kernel text */ - int cpu = 0; - pgprot_t prot = construct_pgprot(PAGE_KERNEL_EXEC, - PAGE_HOME_IMMUTABLE); - - if (ktext_local) { - if (ktext_nocache) - prot = hv_pte_set_mode(prot, - HV_PTE_MODE_UNCACHED); - else - prot = hv_pte_set_mode(prot, - HV_PTE_MODE_CACHE_NO_L3); - } else { - prot = hv_pte_set_mode(prot, - HV_PTE_MODE_CACHE_TILE_L3); - cpu = cpumask_first(&ktext_mask); - - prot = ktext_set_nocache(prot); - } - - BUG_ON(address != (unsigned long)_text); - pte = NULL; - for (; address < (unsigned long)_einittext; - pfn++, address += PAGE_SIZE) { - pte_ofs = pte_index(address); - if (pte_ofs == 0) { - if (pte) - assign_pte(pmd++, pte); - pte = alloc_pte(); - } - if (!ktext_local) { - prot = set_remote_cache_cpu(prot, cpu); - cpu = cpumask_next(cpu, &ktext_mask); - if (cpu == NR_CPUS) - cpu = cpumask_first(&ktext_mask); - } - pte[pte_ofs] = pfn_pte(pfn, prot); - } - if (pte) - assign_pte(pmd, pte); - } else { - pte_t pteval = pfn_pte(0, PAGE_KERNEL_EXEC); - pteval = pte_mkhuge(pteval); - if (ktext_hash) { - pteval = hv_pte_set_mode(pteval, - HV_PTE_MODE_CACHE_HASH_L3); - pteval = ktext_set_nocache(pteval); - } else - if (cpumask_weight(&ktext_mask) == 1) { - pteval = set_remote_cache_cpu(pteval, - cpumask_first(&ktext_mask)); - pteval = hv_pte_set_mode(pteval, - HV_PTE_MODE_CACHE_TILE_L3); - pteval = ktext_set_nocache(pteval); - } else if (ktext_nocache) - pteval = hv_pte_set_mode(pteval, - HV_PTE_MODE_UNCACHED); - else - pteval = hv_pte_set_mode(pteval, - HV_PTE_MODE_CACHE_NO_L3); - for (; address < (unsigned long)_einittext; - pfn += PFN_DOWN(HPAGE_SIZE), address += HPAGE_SIZE) - *(pte_t *)(pmd++) = pfn_pte(pfn, pteval); - } - - /* Set swapper_pgprot here so it is flushed to memory right away. */ - swapper_pgprot = init_pgprot((unsigned long)swapper_pg_dir); - - /* - * Since we may be changing the caching of the stack and page - * table itself, we invoke an assembly helper to do the - * following steps: - * - * - flush the cache so we start with an empty slate - * - install pgtables[] as the real page table - * - flush the TLB so the new page table takes effect - */ - irqmask = interrupt_mask_save_mask(); - interrupt_mask_set_mask(-1ULL); - rc = flush_and_install_context(__pa(pgtables), - init_pgprot((unsigned long)pgtables), - __this_cpu_read(current_asid), - cpumask_bits(my_cpu_mask)); - interrupt_mask_restore_mask(irqmask); - BUG_ON(rc != 0); - - /* Copy the page table back to the normal swapper_pg_dir. */ - memcpy(pgd_base, pgtables, sizeof(pgtables)); - __install_page_table(pgd_base, __this_cpu_read(current_asid), - swapper_pgprot); - - /* - * We just read swapper_pgprot and thus brought it into the cache, - * with its new home & caching mode. When we start the other CPUs, - * they're going to reference swapper_pgprot via their initial fake - * VA-is-PA mappings, which cache everything locally. At that - * time, if it's in our cache with a conflicting home, the - * simulator's coherence checker will complain. So, flush it out - * of our cache; we're not going to ever use it again anyway. - */ - __insn_finv(&swapper_pgprot); -} - -/* - * devmem_is_allowed() checks to see if /dev/mem access to a certain address - * is valid. The argument is a physical page number. - * - * On Tile, the only valid things for which we can just hand out unchecked - * PTEs are the kernel code and data. Anything else might change its - * homing with time, and we wouldn't know to adjust the /dev/mem PTEs. - * Note that init_thread_union is released to heap soon after boot, - * so we include it in the init data. - * - * For TILE-Gx, we might want to consider allowing access to PA - * regions corresponding to PCI space, etc. - */ -int devmem_is_allowed(unsigned long pagenr) -{ - return pagenr < kaddr_to_pfn(_end) && - !(pagenr >= kaddr_to_pfn(&init_thread_union) || - pagenr < kaddr_to_pfn(__init_end)) && - !(pagenr >= kaddr_to_pfn(_sinittext) || - pagenr <= kaddr_to_pfn(_einittext-1)); -} - -#ifdef CONFIG_HIGHMEM -static void __init permanent_kmaps_init(pgd_t *pgd_base) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - unsigned long vaddr; - - vaddr = PKMAP_BASE; - page_table_range_init(vaddr, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base); - - pgd = swapper_pg_dir + pgd_index(vaddr); - pud = pud_offset(pgd, vaddr); - pmd = pmd_offset(pud, vaddr); - pte = pte_offset_kernel(pmd, vaddr); - pkmap_page_table = pte; -} -#endif /* CONFIG_HIGHMEM */ - - -#ifndef CONFIG_64BIT -static void __init init_free_pfn_range(unsigned long start, unsigned long end) -{ - unsigned long pfn; - struct page *page = pfn_to_page(start); - - for (pfn = start; pfn < end; ) { - /* Optimize by freeing pages in large batches */ - int order = __ffs(pfn); - int count, i; - struct page *p; - - if (order >= MAX_ORDER) - order = MAX_ORDER-1; - count = 1 << order; - while (pfn + count > end) { - count >>= 1; - --order; - } - for (p = page, i = 0; i < count; ++i, ++p) { - __ClearPageReserved(p); - /* - * Hacky direct set to avoid unnecessary - * lock take/release for EVERY page here. - */ - p->_refcount.counter = 0; - p->_mapcount.counter = -1; - } - init_page_count(page); - __free_pages(page, order); - adjust_managed_page_count(page, count); - - page += count; - pfn += count; - } -} - -static void __init set_non_bootmem_pages_init(void) -{ - struct zone *z; - for_each_zone(z) { - unsigned long start, end; - int nid = z->zone_pgdat->node_id; -#ifdef CONFIG_HIGHMEM - int idx = zone_idx(z); -#endif - - start = z->zone_start_pfn; - end = start + z->spanned_pages; - start = max(start, node_free_pfn[nid]); - start = max(start, max_low_pfn); - -#ifdef CONFIG_HIGHMEM - if (idx == ZONE_HIGHMEM) - totalhigh_pages += z->spanned_pages; -#endif - if (kdata_huge) { - unsigned long percpu_pfn = node_percpu_pfn[nid]; - if (start < percpu_pfn && end > percpu_pfn) - end = percpu_pfn; - } -#ifdef CONFIG_PCI - if (start <= pci_reserve_start_pfn && - end > pci_reserve_start_pfn) { - if (end > pci_reserve_end_pfn) - init_free_pfn_range(pci_reserve_end_pfn, end); - end = pci_reserve_start_pfn; - } -#endif - init_free_pfn_range(start, end); - } -} -#endif - -/* - * paging_init() sets up the page tables - note that all of lowmem is - * already mapped by head.S. - */ -void __init paging_init(void) -{ -#ifdef __tilegx__ - pud_t *pud; -#endif - pgd_t *pgd_base = swapper_pg_dir; - - kernel_physical_mapping_init(pgd_base); - - /* Fixed mappings, only the page table structure has to be created. */ - page_table_range_init(fix_to_virt(__end_of_fixed_addresses - 1), - FIXADDR_TOP, pgd_base); - -#ifdef CONFIG_HIGHMEM - permanent_kmaps_init(pgd_base); -#endif - -#ifdef __tilegx__ - /* - * Since GX allocates just one pmd_t array worth of vmalloc space, - * we go ahead and allocate it statically here, then share it - * globally. As a result we don't have to worry about any task - * changing init_mm once we get up and running, and there's no - * need for e.g. vmalloc_sync_all(). - */ - BUILD_BUG_ON(pgd_index(VMALLOC_START) != pgd_index(VMALLOC_END - 1)); - pud = pud_offset(pgd_base + pgd_index(VMALLOC_START), VMALLOC_START); - assign_pmd(pud, alloc_pmd()); -#endif -} - - -/* - * Walk the kernel page tables and derive the page_home() from - * the PTEs, so that set_pte() can properly validate the caching - * of all PTEs it sees. - */ -void __init set_page_homes(void) -{ -} - -static void __init set_max_mapnr_init(void) -{ -#ifdef CONFIG_FLATMEM - max_mapnr = max_low_pfn; -#endif -} - -void __init mem_init(void) -{ - int i; -#ifndef __tilegx__ - void *last; -#endif - -#ifdef CONFIG_FLATMEM - BUG_ON(!mem_map); -#endif - -#ifdef CONFIG_HIGHMEM - /* check that fixmap and pkmap do not overlap */ - if (PKMAP_ADDR(LAST_PKMAP-1) >= FIXADDR_START) { - pr_err("fixmap and kmap areas overlap - this will crash\n"); - pr_err("pkstart: %lxh pkend: %lxh fixstart %lxh\n", - PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP-1), FIXADDR_START); - BUG(); - } -#endif - - set_max_mapnr_init(); - - /* this will put all bootmem onto the freelists */ - free_all_bootmem(); - -#ifndef CONFIG_64BIT - /* count all remaining LOWMEM and give all HIGHMEM to page allocator */ - set_non_bootmem_pages_init(); -#endif - - mem_init_print_info(NULL); - - /* - * In debug mode, dump some interesting memory mappings. - */ -#ifdef CONFIG_HIGHMEM - printk(KERN_DEBUG " KMAP %#lx - %#lx\n", - FIXADDR_START, FIXADDR_TOP + PAGE_SIZE - 1); - printk(KERN_DEBUG " PKMAP %#lx - %#lx\n", - PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP) - 1); -#endif - printk(KERN_DEBUG " VMALLOC %#lx - %#lx\n", - _VMALLOC_START, _VMALLOC_END - 1); -#ifdef __tilegx__ - for (i = MAX_NUMNODES-1; i >= 0; --i) { - struct pglist_data *node = &node_data[i]; - if (node->node_present_pages) { - unsigned long start = (unsigned long) - pfn_to_kaddr(node->node_start_pfn); - unsigned long end = start + - (node->node_present_pages << PAGE_SHIFT); - printk(KERN_DEBUG " MEM%d %#lx - %#lx\n", - i, start, end - 1); - } - } -#else - last = high_memory; - for (i = MAX_NUMNODES-1; i >= 0; --i) { - if ((unsigned long)vbase_map[i] != -1UL) { - printk(KERN_DEBUG " LOWMEM%d %#lx - %#lx\n", - i, (unsigned long) (vbase_map[i]), - (unsigned long) (last-1)); - last = vbase_map[i]; - } - } -#endif - -#ifndef __tilegx__ - /* - * Convert from using one lock for all atomic operations to - * one per cpu. - */ - __init_atomic_per_cpu(); -#endif -} - -struct kmem_cache *pgd_cache; - -void __init pgtable_cache_init(void) -{ - pgd_cache = kmem_cache_create("pgd", SIZEOF_PGD, SIZEOF_PGD, 0, NULL); - if (!pgd_cache) - panic("pgtable_cache_init(): Cannot create pgd cache"); -} - -static long __ro_after_init initfree = 1; -static bool __ro_after_init set_initfree_done; - -/* Select whether to free (1) or mark unusable (0) the __init pages. */ -static int __init set_initfree(char *str) -{ - long val; - if (kstrtol(str, 0, &val) == 0) { - set_initfree_done = true; - initfree = val; - pr_info("initfree: %s free init pages\n", - initfree ? "will" : "won't"); - } - return 1; -} -__setup("initfree=", set_initfree); - -static void free_init_pages(char *what, unsigned long begin, unsigned long end) -{ - unsigned long addr = (unsigned long) begin; - - /* Prefer user request first */ - if (!set_initfree_done) { - if (debug_pagealloc_enabled()) - initfree = 0; - } - if (kdata_huge && !initfree) { - pr_warn("Warning: ignoring initfree=0: incompatible with kdata=huge\n"); - initfree = 1; - } - end = (end + PAGE_SIZE - 1) & PAGE_MASK; - local_flush_tlb_pages(NULL, begin, PAGE_SIZE, end - begin); - for (addr = begin; addr < end; addr += PAGE_SIZE) { - /* - * Note we just reset the home here directly in the - * page table. We know this is safe because our caller - * just flushed the caches on all the other cpus, - * and they won't be touching any of these pages. - */ - int pfn = kaddr_to_pfn((void *)addr); - struct page *page = pfn_to_page(pfn); - pte_t *ptep = virt_to_kpte(addr); - if (!initfree) { - /* - * If debugging page accesses then do not free - * this memory but mark them not present - any - * buggy init-section access will create a - * kernel page fault: - */ - pte_clear(&init_mm, addr, ptep); - continue; - } - if (pte_huge(*ptep)) - BUG_ON(!kdata_huge); - else - set_pte_at(&init_mm, addr, ptep, - pfn_pte(pfn, PAGE_KERNEL)); - memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE); - free_reserved_page(page); - } - pr_info("Freeing %s: %ldk freed\n", what, (end - begin) >> 10); -} - -void free_initmem(void) -{ - const unsigned long text_delta = MEM_SV_START - PAGE_OFFSET; - - /* - * Evict the cache on all cores to avoid incoherence. - * We are guaranteed that no one will touch the init pages any more. - */ - homecache_evict(&cpu_cacheable_map); - - /* Free the data pages that we won't use again after init. */ - free_init_pages("unused kernel data", - (unsigned long)__init_begin, - (unsigned long)__init_end); - - /* - * Free the pages mapped from 0xc0000000 that correspond to code - * pages from MEM_SV_START that we won't use again after init. - */ - free_init_pages("unused kernel text", - (unsigned long)_sinittext - text_delta, - (unsigned long)_einittext - text_delta); - /* Do a global TLB flush so everyone sees the changes. */ - flush_tlb_all(); -} diff --git a/arch/tile/mm/migrate.h b/arch/tile/mm/migrate.h deleted file mode 100644 index 91683d97917e..000000000000 --- a/arch/tile/mm/migrate.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Structure definitions for migration, exposed here for use by - * arch/tile/kernel/asm-offsets.c. - */ - -#ifndef MM_MIGRATE_H -#define MM_MIGRATE_H - -#include <linux/cpumask.h> -#include <hv/hypervisor.h> - -/* - * This function is used as a helper when setting up the initial - * page table (swapper_pg_dir). - * - * You must mask ALL interrupts prior to invoking this code, since - * you can't legally touch the stack during the cache flush. - */ -extern int flush_and_install_context(HV_PhysAddr page_table, HV_PTE access, - HV_ASID asid, - const unsigned long *cpumask); - -/* - * This function supports migration as a "helper" as follows: - * - * - Set the stack PTE itself to "migrating". - * - Do a global TLB flush for (va,length) and the specified ASIDs. - * - Do a cache-evict on all necessary cpus. - * - Write the new stack PTE. - * - * Note that any non-NULL pointers must not point to the page that - * is handled by the stack_pte itself. - * - * You must mask ALL interrupts prior to invoking this code, since - * you can't legally touch the stack during the cache flush. - */ -extern int homecache_migrate_stack_and_flush(pte_t stack_pte, unsigned long va, - size_t length, pte_t *stack_ptep, - const struct cpumask *cache_cpumask, - const struct cpumask *tlb_cpumask, - HV_Remote_ASID *asids, - int asidcount); - -#endif /* MM_MIGRATE_H */ diff --git a/arch/tile/mm/migrate_32.S b/arch/tile/mm/migrate_32.S deleted file mode 100644 index 772085491bf9..000000000000 --- a/arch/tile/mm/migrate_32.S +++ /dev/null @@ -1,192 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * This routine is a helper for migrating the home of a set of pages to - * a new cpu. See the documentation in homecache.c for more information. - */ - -#include <linux/linkage.h> -#include <linux/threads.h> -#include <asm/page.h> -#include <asm/thread_info.h> -#include <asm/types.h> -#include <asm/asm-offsets.h> -#include <hv/hypervisor.h> - - .text - -/* - * First, some definitions that apply to all the code in the file. - */ - -/* Locals (caller-save) */ -#define r_tmp r10 -#define r_save_sp r11 - -/* What we save where in the stack frame; must include all callee-saves. */ -#define FRAME_SP 4 -#define FRAME_R30 8 -#define FRAME_R31 12 -#define FRAME_R32 16 -#define FRAME_R33 20 -#define FRAME_R34 24 -#define FRAME_SIZE 28 - - - - -/* - * On entry: - * - * r0 low word of the new context PA to install (moved to r_context_lo) - * r1 high word of the new context PA to install (moved to r_context_hi) - * r2 low word of PTE to use for context access (moved to r_access_lo) - * r3 high word of PTE to use for context access (moved to r_access_lo) - * r4 ASID to use for new context (moved to r_asid) - * r5 pointer to cpumask with just this cpu set in it (r_my_cpumask) - */ - -/* Arguments (caller-save) */ -#define r_context_lo_in r0 -#define r_context_hi_in r1 -#define r_access_lo_in r2 -#define r_access_hi_in r3 -#define r_asid_in r4 -#define r_my_cpumask r5 - -/* Locals (callee-save); must not be more than FRAME_xxx above. */ -#define r_context_lo r30 -#define r_context_hi r31 -#define r_access_lo r32 -#define r_access_hi r33 -#define r_asid r34 - -STD_ENTRY(flush_and_install_context) - /* - * Create a stack frame; we can't touch it once we flush the - * cache until we install the new page table and flush the TLB. - */ - { - move r_save_sp, sp - sw sp, lr - addi sp, sp, -FRAME_SIZE - } - addi r_tmp, sp, FRAME_SP - { - sw r_tmp, r_save_sp - addi r_tmp, sp, FRAME_R30 - } - { - sw r_tmp, r30 - addi r_tmp, sp, FRAME_R31 - } - { - sw r_tmp, r31 - addi r_tmp, sp, FRAME_R32 - } - { - sw r_tmp, r32 - addi r_tmp, sp, FRAME_R33 - } - { - sw r_tmp, r33 - addi r_tmp, sp, FRAME_R34 - } - sw r_tmp, r34 - - /* Move some arguments to callee-save registers. */ - { - move r_context_lo, r_context_lo_in - move r_context_hi, r_context_hi_in - } - { - move r_access_lo, r_access_lo_in - move r_access_hi, r_access_hi_in - } - move r_asid, r_asid_in - - /* First, flush our L2 cache. */ - { - move r0, zero /* cache_pa */ - move r1, zero - } - { - auli r2, zero, ha16(HV_FLUSH_EVICT_L2) /* cache_control */ - move r3, r_my_cpumask /* cache_cpumask */ - } - { - move r4, zero /* tlb_va */ - move r5, zero /* tlb_length */ - } - { - move r6, zero /* tlb_pgsize */ - move r7, zero /* tlb_cpumask */ - } - { - move r8, zero /* asids */ - move r9, zero /* asidcount */ - } - jal _hv_flush_remote - bnz r0, .Ldone - - /* Now install the new page table. */ - { - move r0, r_context_lo - move r1, r_context_hi - } - { - move r2, r_access_lo - move r3, r_access_hi - } - { - move r4, r_asid - moveli r5, HV_CTX_DIRECTIO | CTX_PAGE_FLAG - } - jal _hv_install_context - bnz r0, .Ldone - - /* Finally, flush the TLB. */ - { - movei r0, 0 /* preserve_global */ - jal hv_flush_all - } - -.Ldone: - /* Restore the callee-saved registers and return. */ - addli lr, sp, FRAME_SIZE - { - lw lr, lr - addli r_tmp, sp, FRAME_R30 - } - { - lw r30, r_tmp - addli r_tmp, sp, FRAME_R31 - } - { - lw r31, r_tmp - addli r_tmp, sp, FRAME_R32 - } - { - lw r32, r_tmp - addli r_tmp, sp, FRAME_R33 - } - { - lw r33, r_tmp - addli r_tmp, sp, FRAME_R34 - } - { - lw r34, r_tmp - addi sp, sp, FRAME_SIZE - } - jrp lr - STD_ENDPROC(flush_and_install_context) diff --git a/arch/tile/mm/migrate_64.S b/arch/tile/mm/migrate_64.S deleted file mode 100644 index a49eee38f872..000000000000 --- a/arch/tile/mm/migrate_64.S +++ /dev/null @@ -1,167 +0,0 @@ -/* - * Copyright 2011 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * This routine is a helper for migrating the home of a set of pages to - * a new cpu. See the documentation in homecache.c for more information. - */ - -#include <linux/linkage.h> -#include <linux/threads.h> -#include <asm/page.h> -#include <asm/thread_info.h> -#include <asm/types.h> -#include <asm/asm-offsets.h> -#include <hv/hypervisor.h> - - .text - -/* - * First, some definitions that apply to all the code in the file. - */ - -/* Locals (caller-save) */ -#define r_tmp r10 -#define r_save_sp r11 - -/* What we save where in the stack frame; must include all callee-saves. */ -#define FRAME_SP 8 -#define FRAME_R30 16 -#define FRAME_R31 24 -#define FRAME_R32 32 -#define FRAME_SIZE 40 - - - - -/* - * On entry: - * - * r0 the new context PA to install (moved to r_context) - * r1 PTE to use for context access (moved to r_access) - * r2 ASID to use for new context (moved to r_asid) - * r3 pointer to cpumask with just this cpu set in it (r_my_cpumask) - */ - -/* Arguments (caller-save) */ -#define r_context_in r0 -#define r_access_in r1 -#define r_asid_in r2 -#define r_my_cpumask r3 - -/* Locals (callee-save); must not be more than FRAME_xxx above. */ -#define r_context r30 -#define r_access r31 -#define r_asid r32 - -/* - * Caller-save locals and frame constants are the same as - * for homecache_migrate_stack_and_flush. - */ - -STD_ENTRY(flush_and_install_context) - /* - * Create a stack frame; we can't touch it once we flush the - * cache until we install the new page table and flush the TLB. - */ - { - move r_save_sp, sp - st sp, lr - addi sp, sp, -FRAME_SIZE - } - addi r_tmp, sp, FRAME_SP - { - st r_tmp, r_save_sp - addi r_tmp, sp, FRAME_R30 - } - { - st r_tmp, r30 - addi r_tmp, sp, FRAME_R31 - } - { - st r_tmp, r31 - addi r_tmp, sp, FRAME_R32 - } - st r_tmp, r32 - - /* Move some arguments to callee-save registers. */ - { - move r_context, r_context_in - move r_access, r_access_in - } - move r_asid, r_asid_in - - /* First, flush our L2 cache. */ - { - move r0, zero /* cache_pa */ - moveli r1, hw2_last(HV_FLUSH_EVICT_L2) /* cache_control */ - } - { - shl16insli r1, r1, hw1(HV_FLUSH_EVICT_L2) - move r2, r_my_cpumask /* cache_cpumask */ - } - { - shl16insli r1, r1, hw0(HV_FLUSH_EVICT_L2) - move r3, zero /* tlb_va */ - } - { - move r4, zero /* tlb_length */ - move r5, zero /* tlb_pgsize */ - } - { - move r6, zero /* tlb_cpumask */ - move r7, zero /* asids */ - } - { - move r8, zero /* asidcount */ - jal _hv_flush_remote - } - bnez r0, 1f - - /* Now install the new page table. */ - { - move r0, r_context - move r1, r_access - } - { - move r2, r_asid - moveli r3, HV_CTX_DIRECTIO | CTX_PAGE_FLAG - } - jal _hv_install_context - bnez r0, 1f - - /* Finally, flush the TLB. */ - { - movei r0, 0 /* preserve_global */ - jal hv_flush_all - } - -1: /* Restore the callee-saved registers and return. */ - addli lr, sp, FRAME_SIZE - { - ld lr, lr - addli r_tmp, sp, FRAME_R30 - } - { - ld r30, r_tmp - addli r_tmp, sp, FRAME_R31 - } - { - ld r31, r_tmp - addli r_tmp, sp, FRAME_R32 - } - { - ld r32, r_tmp - addi sp, sp, FRAME_SIZE - } - jrp lr - STD_ENDPROC(flush_and_install_context) diff --git a/arch/tile/mm/mmap.c b/arch/tile/mm/mmap.c deleted file mode 100644 index 8ab28167c44b..000000000000 --- a/arch/tile/mm/mmap.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Taken from the i386 architecture and simplified. - */ - -#include <linux/mm.h> -#include <linux/random.h> -#include <linux/limits.h> -#include <linux/sched/signal.h> -#include <linux/sched/mm.h> -#include <linux/mman.h> -#include <linux/compat.h> - -/* - * Top of mmap area (just below the process stack). - * - * Leave an at least ~128 MB hole. - */ -#define MIN_GAP (128*1024*1024) -#define MAX_GAP (TASK_SIZE/6*5) - -static inline unsigned long mmap_base(struct mm_struct *mm) -{ - unsigned long gap = rlimit(RLIMIT_STACK); - unsigned long random_factor = 0; - - if (current->flags & PF_RANDOMIZE) - random_factor = get_random_int() % (1024*1024); - - if (gap < MIN_GAP) - gap = MIN_GAP; - else if (gap > MAX_GAP) - gap = MAX_GAP; - - return PAGE_ALIGN(TASK_SIZE - gap - random_factor); -} - -/* - * This function, called very early during the creation of a new - * process VM image, sets up which VM layout function to use: - */ -void arch_pick_mmap_layout(struct mm_struct *mm) -{ -#if !defined(__tilegx__) - int is_32bit = 1; -#elif defined(CONFIG_COMPAT) - int is_32bit = is_compat_task(); -#else - int is_32bit = 0; -#endif - unsigned long random_factor = 0UL; - - /* - * 8 bits of randomness in 32bit mmaps, 24 address space bits - * 12 bits of randomness in 64bit mmaps, 28 address space bits - */ - if (current->flags & PF_RANDOMIZE) { - if (is_32bit) - random_factor = get_random_int() % (1<<8); - else - random_factor = get_random_int() % (1<<12); - - random_factor <<= PAGE_SHIFT; - } - - /* - * Use standard layout if the expected stack growth is unlimited - * or we are running native 64 bits. - */ - if (rlimit(RLIMIT_STACK) == RLIM_INFINITY) { - mm->mmap_base = TASK_UNMAPPED_BASE + random_factor; - mm->get_unmapped_area = arch_get_unmapped_area; - } else { - mm->mmap_base = mmap_base(mm); - mm->get_unmapped_area = arch_get_unmapped_area_topdown; - } -} - -unsigned long arch_randomize_brk(struct mm_struct *mm) -{ - return randomize_page(mm->brk, 0x02000000); -} diff --git a/arch/tile/mm/pgtable.c b/arch/tile/mm/pgtable.c deleted file mode 100644 index ec5576fd3a86..000000000000 --- a/arch/tile/mm/pgtable.c +++ /dev/null @@ -1,550 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/mm.h> -#include <linux/swap.h> -#include <linux/highmem.h> -#include <linux/slab.h> -#include <linux/pagemap.h> -#include <linux/spinlock.h> -#include <linux/cpumask.h> -#include <linux/module.h> -#include <linux/io.h> -#include <linux/vmalloc.h> -#include <linux/smp.h> - -#include <asm/pgtable.h> -#include <asm/pgalloc.h> -#include <asm/fixmap.h> -#include <asm/tlb.h> -#include <asm/tlbflush.h> -#include <asm/homecache.h> - -#define K(x) ((x) << (PAGE_SHIFT-10)) - -/** - * shatter_huge_page() - ensure a given address is mapped by a small page. - * - * This function converts a huge PTE mapping kernel LOWMEM into a bunch - * of small PTEs with the same caching. No cache flush required, but we - * must do a global TLB flush. - * - * Any caller that wishes to modify a kernel mapping that might - * have been made with a huge page should call this function, - * since doing so properly avoids race conditions with installing the - * newly-shattered page and then flushing all the TLB entries. - * - * @addr: Address at which to shatter any existing huge page. - */ -void shatter_huge_page(unsigned long addr) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - unsigned long flags = 0; /* happy compiler */ -#ifdef __PAGETABLE_PMD_FOLDED - struct list_head *pos; -#endif - - /* Get a pointer to the pmd entry that we need to change. */ - addr &= HPAGE_MASK; - BUG_ON(pgd_addr_invalid(addr)); - BUG_ON(addr < PAGE_OFFSET); /* only for kernel LOWMEM */ - pgd = swapper_pg_dir + pgd_index(addr); - pud = pud_offset(pgd, addr); - BUG_ON(!pud_present(*pud)); - pmd = pmd_offset(pud, addr); - BUG_ON(!pmd_present(*pmd)); - if (!pmd_huge_page(*pmd)) - return; - - spin_lock_irqsave(&init_mm.page_table_lock, flags); - if (!pmd_huge_page(*pmd)) { - /* Lost the race to convert the huge page. */ - spin_unlock_irqrestore(&init_mm.page_table_lock, flags); - return; - } - - /* Shatter the huge page into the preallocated L2 page table. */ - pmd_populate_kernel(&init_mm, pmd, get_prealloc_pte(pmd_pfn(*pmd))); - -#ifdef __PAGETABLE_PMD_FOLDED - /* Walk every pgd on the system and update the pmd there. */ - spin_lock(&pgd_lock); - list_for_each(pos, &pgd_list) { - pmd_t *copy_pmd; - pgd = list_to_pgd(pos) + pgd_index(addr); - pud = pud_offset(pgd, addr); - copy_pmd = pmd_offset(pud, addr); - __set_pmd(copy_pmd, *pmd); - } - spin_unlock(&pgd_lock); -#endif - - /* Tell every cpu to notice the change. */ - flush_remote(0, 0, NULL, addr, HPAGE_SIZE, HPAGE_SIZE, - cpu_possible_mask, NULL, 0); - - /* Hold the lock until the TLB flush is finished to avoid races. */ - spin_unlock_irqrestore(&init_mm.page_table_lock, flags); -} - -/* - * List of all pgd's needed so it can invalidate entries in both cached - * and uncached pgd's. This is essentially codepath-based locking - * against pageattr.c; it is the unique case in which a valid change - * of kernel pagetables can't be lazily synchronized by vmalloc faults. - * vmalloc faults work because attached pagetables are never freed. - * - * The lock is always taken with interrupts disabled, unlike on x86 - * and other platforms, because we need to take the lock in - * shatter_huge_page(), which may be called from an interrupt context. - * We are not at risk from the tlbflush IPI deadlock that was seen on - * x86, since we use the flush_remote() API to have the hypervisor do - * the TLB flushes regardless of irq disabling. - */ -DEFINE_SPINLOCK(pgd_lock); -LIST_HEAD(pgd_list); - -static inline void pgd_list_add(pgd_t *pgd) -{ - list_add(pgd_to_list(pgd), &pgd_list); -} - -static inline void pgd_list_del(pgd_t *pgd) -{ - list_del(pgd_to_list(pgd)); -} - -#define KERNEL_PGD_INDEX_START pgd_index(PAGE_OFFSET) -#define KERNEL_PGD_PTRS (PTRS_PER_PGD - KERNEL_PGD_INDEX_START) - -static void pgd_ctor(pgd_t *pgd) -{ - unsigned long flags; - - memset(pgd, 0, KERNEL_PGD_INDEX_START*sizeof(pgd_t)); - spin_lock_irqsave(&pgd_lock, flags); - -#ifndef __tilegx__ - /* - * Check that the user interrupt vector has no L2. - * It never should for the swapper, and new page tables - * should always start with an empty user interrupt vector. - */ - BUG_ON(((u64 *)swapper_pg_dir)[pgd_index(MEM_USER_INTRPT)] != 0); -#endif - - memcpy(pgd + KERNEL_PGD_INDEX_START, - swapper_pg_dir + KERNEL_PGD_INDEX_START, - KERNEL_PGD_PTRS * sizeof(pgd_t)); - - pgd_list_add(pgd); - spin_unlock_irqrestore(&pgd_lock, flags); -} - -static void pgd_dtor(pgd_t *pgd) -{ - unsigned long flags; /* can be called from interrupt context */ - - spin_lock_irqsave(&pgd_lock, flags); - pgd_list_del(pgd); - spin_unlock_irqrestore(&pgd_lock, flags); -} - -pgd_t *pgd_alloc(struct mm_struct *mm) -{ - pgd_t *pgd = kmem_cache_alloc(pgd_cache, GFP_KERNEL); - if (pgd) - pgd_ctor(pgd); - return pgd; -} - -void pgd_free(struct mm_struct *mm, pgd_t *pgd) -{ - pgd_dtor(pgd); - kmem_cache_free(pgd_cache, pgd); -} - - -#define L2_USER_PGTABLE_PAGES (1 << L2_USER_PGTABLE_ORDER) - -struct page *pgtable_alloc_one(struct mm_struct *mm, unsigned long address, - int order) -{ - gfp_t flags = GFP_KERNEL|__GFP_ZERO; - struct page *p; - int i; - - p = alloc_pages(flags, L2_USER_PGTABLE_ORDER); - if (p == NULL) - return NULL; - - if (!pgtable_page_ctor(p)) { - __free_pages(p, L2_USER_PGTABLE_ORDER); - return NULL; - } - - /* - * Make every page have a page_count() of one, not just the first. - * We don't use __GFP_COMP since it doesn't look like it works - * correctly with tlb_remove_page(). - */ - for (i = 1; i < order; ++i) { - init_page_count(p+i); - inc_zone_page_state(p+i, NR_PAGETABLE); - } - - return p; -} - -/* - * Free page immediately (used in __pte_alloc if we raced with another - * process). We have to correct whatever pte_alloc_one() did before - * returning the pages to the allocator. - */ -void pgtable_free(struct mm_struct *mm, struct page *p, int order) -{ - int i; - - pgtable_page_dtor(p); - __free_page(p); - - for (i = 1; i < order; ++i) { - __free_page(p+i); - dec_zone_page_state(p+i, NR_PAGETABLE); - } -} - -void __pgtable_free_tlb(struct mmu_gather *tlb, struct page *pte, - unsigned long address, int order) -{ - int i; - - pgtable_page_dtor(pte); - tlb_remove_page(tlb, pte); - - for (i = 1; i < order; ++i) { - tlb_remove_page(tlb, pte + i); - dec_zone_page_state(pte + i, NR_PAGETABLE); - } -} - -#ifndef __tilegx__ - -/* - * FIXME: needs to be atomic vs hypervisor writes. For now we make the - * window of vulnerability a bit smaller by doing an unlocked 8-bit update. - */ -int ptep_test_and_clear_young(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep) -{ -#if HV_PTE_INDEX_ACCESSED < 8 || HV_PTE_INDEX_ACCESSED >= 16 -# error Code assumes HV_PTE "accessed" bit in second byte -#endif - u8 *tmp = (u8 *)ptep; - u8 second_byte = tmp[1]; - if (!(second_byte & (1 << (HV_PTE_INDEX_ACCESSED - 8)))) - return 0; - tmp[1] = second_byte & ~(1 << (HV_PTE_INDEX_ACCESSED - 8)); - return 1; -} - -/* - * This implementation is atomic vs hypervisor writes, since the hypervisor - * always writes the low word (where "accessed" and "dirty" are) and this - * routine only writes the high word. - */ -void ptep_set_wrprotect(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ -#if HV_PTE_INDEX_WRITABLE < 32 -# error Code assumes HV_PTE "writable" bit in high word -#endif - u32 *tmp = (u32 *)ptep; - tmp[1] = tmp[1] & ~(1 << (HV_PTE_INDEX_WRITABLE - 32)); -} - -#endif - -/* - * Return a pointer to the PTE that corresponds to the given - * address in the given page table. A NULL page table just uses - * the standard kernel page table; the preferred API in this case - * is virt_to_kpte(). - * - * The returned pointer can point to a huge page in other levels - * of the page table than the bottom, if the huge page is present - * in the page table. For bottom-level PTEs, the returned pointer - * can point to a PTE that is either present or not. - */ -pte_t *virt_to_pte(struct mm_struct* mm, unsigned long addr) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - - if (pgd_addr_invalid(addr)) - return NULL; - - pgd = mm ? pgd_offset(mm, addr) : swapper_pg_dir + pgd_index(addr); - pud = pud_offset(pgd, addr); - if (!pud_present(*pud)) - return NULL; - if (pud_huge_page(*pud)) - return (pte_t *)pud; - pmd = pmd_offset(pud, addr); - if (!pmd_present(*pmd)) - return NULL; - if (pmd_huge_page(*pmd)) - return (pte_t *)pmd; - return pte_offset_kernel(pmd, addr); -} -EXPORT_SYMBOL(virt_to_pte); - -pte_t *virt_to_kpte(unsigned long kaddr) -{ - BUG_ON(kaddr < PAGE_OFFSET); - return virt_to_pte(NULL, kaddr); -} -EXPORT_SYMBOL(virt_to_kpte); - -pgprot_t set_remote_cache_cpu(pgprot_t prot, int cpu) -{ - unsigned int width = smp_width; - int x = cpu % width; - int y = cpu / width; - BUG_ON(y >= smp_height); - BUG_ON(hv_pte_get_mode(prot) != HV_PTE_MODE_CACHE_TILE_L3); - BUG_ON(cpu < 0 || cpu >= NR_CPUS); - BUG_ON(!cpu_is_valid_lotar(cpu)); - return hv_pte_set_lotar(prot, HV_XY_TO_LOTAR(x, y)); -} - -int get_remote_cache_cpu(pgprot_t prot) -{ - HV_LOTAR lotar = hv_pte_get_lotar(prot); - int x = HV_LOTAR_X(lotar); - int y = HV_LOTAR_Y(lotar); - BUG_ON(hv_pte_get_mode(prot) != HV_PTE_MODE_CACHE_TILE_L3); - return x + y * smp_width; -} - -/* - * Convert a kernel VA to a PA and homing information. - */ -int va_to_cpa_and_pte(void *va, unsigned long long *cpa, pte_t *pte) -{ - struct page *page = virt_to_page(va); - pte_t null_pte = { 0 }; - - *cpa = __pa(va); - - /* Note that this is not writing a page table, just returning a pte. */ - *pte = pte_set_home(null_pte, page_home(page)); - - return 0; /* return non-zero if not hfh? */ -} -EXPORT_SYMBOL(va_to_cpa_and_pte); - -void __set_pte(pte_t *ptep, pte_t pte) -{ -#ifdef __tilegx__ - *ptep = pte; -#else -# if HV_PTE_INDEX_PRESENT >= 32 || HV_PTE_INDEX_MIGRATING >= 32 -# error Must write the present and migrating bits last -# endif - if (pte_present(pte)) { - ((u32 *)ptep)[1] = (u32)(pte_val(pte) >> 32); - barrier(); - ((u32 *)ptep)[0] = (u32)(pte_val(pte)); - } else { - ((u32 *)ptep)[0] = (u32)(pte_val(pte)); - barrier(); - ((u32 *)ptep)[1] = (u32)(pte_val(pte) >> 32); - } -#endif /* __tilegx__ */ -} - -void set_pte(pte_t *ptep, pte_t pte) -{ - if (pte_present(pte) && - (!CHIP_HAS_MMIO() || hv_pte_get_mode(pte) != HV_PTE_MODE_MMIO)) { - /* The PTE actually references physical memory. */ - unsigned long pfn = pte_pfn(pte); - if (pfn_valid(pfn)) { - /* Update the home of the PTE from the struct page. */ - pte = pte_set_home(pte, page_home(pfn_to_page(pfn))); - } else if (hv_pte_get_mode(pte) == 0) { - /* remap_pfn_range(), etc, must supply PTE mode. */ - panic("set_pte(): out-of-range PFN and mode 0\n"); - } - } - - __set_pte(ptep, pte); -} - -/* Can this mm load a PTE with cached_priority set? */ -static inline int mm_is_priority_cached(struct mm_struct *mm) -{ - return mm->context.priority_cached != 0; -} - -/* - * Add a priority mapping to an mm_context and - * notify the hypervisor if this is the first one. - */ -void start_mm_caching(struct mm_struct *mm) -{ - if (!mm_is_priority_cached(mm)) { - mm->context.priority_cached = -1UL; - hv_set_caching(-1UL); - } -} - -/* - * Validate and return the priority_cached flag. We know if it's zero - * that we don't need to scan, since we immediately set it non-zero - * when we first consider a MAP_CACHE_PRIORITY mapping. - * - * We only _try_ to acquire the mmap_sem semaphore; if we can't acquire it, - * since we're in an interrupt context (servicing switch_mm) we don't - * worry about it and don't unset the "priority_cached" field. - * Presumably we'll come back later and have more luck and clear - * the value then; for now we'll just keep the cache marked for priority. - */ -static unsigned long update_priority_cached(struct mm_struct *mm) -{ - if (mm->context.priority_cached && down_write_trylock(&mm->mmap_sem)) { - struct vm_area_struct *vm; - for (vm = mm->mmap; vm; vm = vm->vm_next) { - if (hv_pte_get_cached_priority(vm->vm_page_prot)) - break; - } - if (vm == NULL) - mm->context.priority_cached = 0; - up_write(&mm->mmap_sem); - } - return mm->context.priority_cached; -} - -/* Set caching correctly for an mm that we are switching to. */ -void check_mm_caching(struct mm_struct *prev, struct mm_struct *next) -{ - if (!mm_is_priority_cached(next)) { - /* - * If the new mm doesn't use priority caching, just see if we - * need the hv_set_caching(), or can assume it's already zero. - */ - if (mm_is_priority_cached(prev)) - hv_set_caching(0); - } else { - hv_set_caching(update_priority_cached(next)); - } -} - -#if CHIP_HAS_MMIO() - -/* Map an arbitrary MMIO address, homed according to pgprot, into VA space. */ -void __iomem *ioremap_prot(resource_size_t phys_addr, unsigned long size, - pgprot_t home) -{ - void *addr; - struct vm_struct *area; - unsigned long offset, last_addr; - pgprot_t pgprot; - - /* Don't allow wraparound or zero size */ - last_addr = phys_addr + size - 1; - if (!size || last_addr < phys_addr) - return NULL; - - /* Create a read/write, MMIO VA mapping homed at the requested shim. */ - pgprot = PAGE_KERNEL; - pgprot = hv_pte_set_mode(pgprot, HV_PTE_MODE_MMIO); - pgprot = hv_pte_set_lotar(pgprot, hv_pte_get_lotar(home)); - - /* - * Mappings have to be page-aligned - */ - offset = phys_addr & ~PAGE_MASK; - phys_addr &= PAGE_MASK; - size = PAGE_ALIGN(last_addr+1) - phys_addr; - - /* - * Ok, go for it.. - */ - area = get_vm_area(size, VM_IOREMAP /* | other flags? */); - if (!area) - return NULL; - area->phys_addr = phys_addr; - addr = area->addr; - if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size, - phys_addr, pgprot)) { - free_vm_area(area); - return NULL; - } - return (__force void __iomem *) (offset + (char *)addr); -} -EXPORT_SYMBOL(ioremap_prot); - -#if !defined(CONFIG_PCI) || !defined(CONFIG_TILEGX) -/* ioremap is conditionally declared in pci_gx.c */ - -void __iomem *ioremap(resource_size_t phys_addr, unsigned long size) -{ - return NULL; -} -EXPORT_SYMBOL(ioremap); - -#endif - -/* Unmap an MMIO VA mapping. */ -void iounmap(volatile void __iomem *addr_in) -{ - volatile void __iomem *addr = (volatile void __iomem *) - (PAGE_MASK & (unsigned long __force)addr_in); -#if 1 - vunmap((void * __force)addr); -#else - /* x86 uses this complicated flow instead of vunmap(). Is - * there any particular reason we should do the same? */ - struct vm_struct *p, *o; - - /* Use the vm area unlocked, assuming the caller - ensures there isn't another iounmap for the same address - in parallel. Reuse of the virtual address is prevented by - leaving it in the global lists until we're done with it. - cpa takes care of the direct mappings. */ - p = find_vm_area((void *)addr); - - if (!p) { - pr_err("iounmap: bad address %p\n", addr); - dump_stack(); - return; - } - - /* Finally remove it */ - o = remove_vm_area((void *)addr); - BUG_ON(p != o || o == NULL); - kfree(p); -#endif -} -EXPORT_SYMBOL(iounmap); - -#endif /* CHIP_HAS_MMIO() */ |