diff options
Diffstat (limited to 'arch/sh/drivers/pci/pci-auto.c')
| -rw-r--r-- | arch/sh/drivers/pci/pci-auto.c | 545 |
1 files changed, 0 insertions, 545 deletions
diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c deleted file mode 100644 index cf48b12ee58c..000000000000 --- a/arch/sh/drivers/pci/pci-auto.c +++ /dev/null @@ -1,545 +0,0 @@ -/* - * PCI autoconfiguration library - * - * Author: Matt Porter <mporter@mvista.com> - * - * Copyright 2000, 2001 MontaVista Software Inc. - * Copyright 2001 Bradley D. LaRonde <brad@ltc.com> - * Copyright 2003 Paul Mundt <lethal@linux-sh.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/* - * Modified for MIPS by Jun Sun, jsun@mvista.com - * - * . Simplify the interface between pci_auto and the rest: a single function. - * . Assign resources from low address to upper address. - * . change most int to u32. - * - * Further modified to include it as mips generic code, ppopov@mvista.com. - * - * 2001-10-26 Bradley D. LaRonde <brad@ltc.com> - * - Add a top_bus argument to the "early config" functions so that - * they can set a fake parent bus pointer to convince the underlying - * pci ops to use type 1 configuration for sub busses. - * - Set bridge base and limit registers correctly. - * - Align io and memory base properly before and after bridge setup. - * - Don't fall through to pci_setup_bars for bridge. - * - Reformat the debug output to look more like lspci's output. - * - * Cloned for SuperH by M. R. Brown, mrbrown@0xd6.org - * - * 2003-08-05 Paul Mundt <lethal@linux-sh.org> - * - Don't update the BAR values on systems that already have valid addresses - * and don't want these updated for whatever reason, by way of a new config - * option check. However, we still read in the old BAR values so that they - * can still be reported through the debug output. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/pci.h> - -#define DEBUG -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -/* - * These functions are used early on before PCI scanning is done - * and all of the pci_dev and pci_bus structures have been created. - */ -static struct pci_dev *fake_pci_dev(struct pci_channel *hose, - int top_bus, int busnr, int devfn) -{ - static struct pci_dev dev; - static struct pci_bus bus; - - dev.bus = &bus; - dev.sysdata = hose; - dev.devfn = devfn; - bus.number = busnr; - bus.ops = hose->pci_ops; - - if(busnr != top_bus) - /* Fake a parent bus structure. */ - bus.parent = &bus; - else - bus.parent = NULL; - - return &dev; -} - -#define EARLY_PCI_OP(rw, size, type) \ -static int early_##rw##_config_##size(struct pci_channel *hose, \ - int top_bus, int bus, int devfn, int offset, type value) \ -{ \ - return pci_##rw##_config_##size( \ - fake_pci_dev(hose, top_bus, bus, devfn), \ - offset, value); \ -} - -EARLY_PCI_OP(read, byte, u8 *) -EARLY_PCI_OP(read, word, u16 *) -EARLY_PCI_OP(read, dword, u32 *) -EARLY_PCI_OP(write, byte, u8) -EARLY_PCI_OP(write, word, u16) -EARLY_PCI_OP(write, dword, u32) - -static struct resource *io_resource_inuse; -static struct resource *mem_resource_inuse; - -static u32 pciauto_lower_iospc; -static u32 pciauto_upper_iospc; - -static u32 pciauto_lower_memspc; -static u32 pciauto_upper_memspc; - -static void __init -pciauto_setup_bars(struct pci_channel *hose, - int top_bus, - int current_bus, - int pci_devfn, - int bar_limit) -{ - u32 bar_response, bar_size, bar_value; - u32 bar, addr_mask, bar_nr = 0; - u32 * upper_limit; - u32 * lower_limit; - int found_mem64 = 0; - - for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) { - u32 bar_addr; - - /* Read the old BAR value */ - early_read_config_dword(hose, top_bus, - current_bus, - pci_devfn, - bar, - &bar_addr); - - /* Tickle the BAR and get the response */ - early_write_config_dword(hose, top_bus, - current_bus, - pci_devfn, - bar, - 0xffffffff); - - early_read_config_dword(hose, top_bus, - current_bus, - pci_devfn, - bar, - &bar_response); - - /* - * Write the old BAR value back out, only update the BAR - * if we implicitly want resources to be updated, which - * is done by the generic code further down. -- PFM. - */ - early_write_config_dword(hose, top_bus, - current_bus, - pci_devfn, - bar, - bar_addr); - - /* If BAR is not implemented go to the next BAR */ - if (!bar_response) - continue; - - /* - * Workaround for a BAR that doesn't use its upper word, - * like the ALi 1535D+ PCI DC-97 Controller Modem (M5457). - * bdl <brad@ltc.com> - */ - if (!(bar_response & 0xffff0000)) - bar_response |= 0xffff0000; - -retry: - /* Check the BAR type and set our address mask */ - if (bar_response & PCI_BASE_ADDRESS_SPACE) { - addr_mask = PCI_BASE_ADDRESS_IO_MASK; - upper_limit = &pciauto_upper_iospc; - lower_limit = &pciauto_lower_iospc; - DBG(" I/O"); - } else { - if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == - PCI_BASE_ADDRESS_MEM_TYPE_64) - found_mem64 = 1; - - addr_mask = PCI_BASE_ADDRESS_MEM_MASK; - upper_limit = &pciauto_upper_memspc; - lower_limit = &pciauto_lower_memspc; - DBG(" Mem"); - } - - - /* Calculate requested size */ - bar_size = ~(bar_response & addr_mask) + 1; - - /* Allocate a base address */ - bar_value = ((*lower_limit - 1) & ~(bar_size - 1)) + bar_size; - - if ((bar_value + bar_size) > *upper_limit) { - if (bar_response & PCI_BASE_ADDRESS_SPACE) { - if (io_resource_inuse->child) { - io_resource_inuse = - io_resource_inuse->child; - pciauto_lower_iospc = - io_resource_inuse->start; - pciauto_upper_iospc = - io_resource_inuse->end + 1; - goto retry; - } - - } else { - if (mem_resource_inuse->child) { - mem_resource_inuse = - mem_resource_inuse->child; - pciauto_lower_memspc = - mem_resource_inuse->start; - pciauto_upper_memspc = - mem_resource_inuse->end + 1; - goto retry; - } - } - DBG(" unavailable -- skipping, value %x size %x\n", - bar_value, bar_size); - continue; - } - - if (bar_value < *lower_limit || (bar_value + bar_size) >= *upper_limit) { - DBG(" unavailable -- skipping, value %x size %x\n", - bar_value, bar_size); - continue; - } - -#ifdef CONFIG_PCI_AUTO_UPDATE_RESOURCES - /* Write it out and update our limit */ - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - bar, bar_value); -#endif - - *lower_limit = bar_value + bar_size; - - /* - * If we are a 64-bit decoder then increment to the - * upper 32 bits of the bar and force it to locate - * in the lower 4GB of memory. - */ - if (found_mem64) { - bar += 4; - early_write_config_dword(hose, top_bus, - current_bus, - pci_devfn, - bar, - 0x00000000); - } - - DBG(" at 0x%.8x [size=0x%x]\n", bar_value, bar_size); - - bar_nr++; - } - -} - -static void __init -pciauto_prescan_setup_bridge(struct pci_channel *hose, - int top_bus, - int current_bus, - int pci_devfn, - int sub_bus) -{ - /* Configure bus number registers */ - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_PRIMARY_BUS, current_bus); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_SECONDARY_BUS, sub_bus + 1); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_SUBORDINATE_BUS, 0xff); - - /* Align memory and I/O to 1MB and 4KB boundaries. */ - pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1)) - & ~(0x100000 - 1); - pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1)) - & ~(0x1000 - 1); - - /* Set base (lower limit) of address range behind bridge. */ - early_write_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_MEMORY_BASE, pciauto_lower_memspc >> 16); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_IO_BASE, (pciauto_lower_iospc & 0x0000f000) >> 8); - early_write_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_IO_BASE_UPPER16, pciauto_lower_iospc >> 16); - - /* We don't support prefetchable memory for now, so disable */ - early_write_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_PREF_MEMORY_BASE, 0); - early_write_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_PREF_MEMORY_LIMIT, 0); -} - -static void __init -pciauto_postscan_setup_bridge(struct pci_channel *hose, - int top_bus, - int current_bus, - int pci_devfn, - int sub_bus) -{ - u32 temp; - - /* - * [jsun] we always bump up baselines a little, so that if there - * nothing behind P2P bridge, we don't wind up overlapping IO/MEM - * spaces. - */ - pciauto_lower_memspc += 1; - pciauto_lower_iospc += 1; - - /* Configure bus number registers */ - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_SUBORDINATE_BUS, sub_bus); - - /* Set upper limit of address range behind bridge. */ - early_write_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_MEMORY_LIMIT, pciauto_lower_memspc >> 16); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_IO_LIMIT, (pciauto_lower_iospc & 0x0000f000) >> 8); - early_write_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_IO_LIMIT_UPPER16, pciauto_lower_iospc >> 16); - - /* Align memory and I/O to 1MB and 4KB boundaries. */ - pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1)) - & ~(0x100000 - 1); - pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1)) - & ~(0x1000 - 1); - - /* Enable memory and I/O accesses, enable bus master */ - early_read_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_COMMAND, &temp); - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY - | PCI_COMMAND_MASTER); -} - -static void __init -pciauto_prescan_setup_cardbus_bridge(struct pci_channel *hose, - int top_bus, - int current_bus, - int pci_devfn, - int sub_bus) -{ - /* Configure bus number registers */ - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_PRIMARY_BUS, current_bus); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_SECONDARY_BUS, sub_bus + 1); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_SUBORDINATE_BUS, 0xff); - - /* Align memory and I/O to 4KB and 4 byte boundaries. */ - pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1)) - & ~(0x1000 - 1); - pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1)) - & ~(0x4 - 1); - - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_CB_MEMORY_BASE_0, pciauto_lower_memspc); - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_CB_IO_BASE_0, pciauto_lower_iospc); -} - -static void __init -pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose, - int top_bus, - int current_bus, - int pci_devfn, - int sub_bus) -{ - u32 temp; - - /* - * [jsun] we always bump up baselines a little, so that if there - * nothing behind P2P bridge, we don't wind up overlapping IO/MEM - * spaces. - */ - pciauto_lower_memspc += 1; - pciauto_lower_iospc += 1; - - /* - * Configure subordinate bus number. The PCI subsystem - * bus scan will renumber buses (reserving three additional - * for this PCI<->CardBus bridge for the case where a CardBus - * adapter contains a P2P or CB2CB bridge. - */ - - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_SUBORDINATE_BUS, sub_bus); - - /* - * Reserve an additional 4MB for mem space and 16KB for - * I/O space. This should cover any additional space - * requirement of unusual CardBus devices with - * additional bridges that can consume more address space. - * - * Although pcmcia-cs currently will reprogram bridge - * windows, the goal is to add an option to leave them - * alone and use the bridge window ranges as the regions - * that are searched for free resources upon hot-insertion - * of a device. This will allow a PCI<->CardBus bridge - * configured by this routine to happily live behind a - * P2P bridge in a system. - */ - /* Align memory and I/O to 4KB and 4 byte boundaries. */ - pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1)) - & ~(0x1000 - 1); - pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1)) - & ~(0x4 - 1); - /* Set up memory and I/O filter limits, assume 32-bit I/O space */ - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_CB_MEMORY_LIMIT_0, pciauto_lower_memspc - 1); - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_CB_IO_LIMIT_0, pciauto_lower_iospc - 1); - - /* Enable memory and I/O accesses, enable bus master */ - early_read_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_COMMAND, &temp); - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER); -} - -#define PCIAUTO_IDE_MODE_MASK 0x05 - -static int __init -pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus) -{ - int sub_bus; - u32 pci_devfn, pci_class, cmdstat, found_multi=0; - unsigned short vid, did; - unsigned char header_type; - int devfn_start = 0; - int devfn_stop = 0xff; - - sub_bus = current_bus; - - if (hose->first_devfn) - devfn_start = hose->first_devfn; - if (hose->last_devfn) - devfn_stop = hose->last_devfn; - - for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) { - - if (PCI_FUNC(pci_devfn) && !found_multi) - continue; - - early_read_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_VENDOR_ID, &vid); - - if (vid == 0xffff) continue; - - early_read_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_HEADER_TYPE, &header_type); - - if (!PCI_FUNC(pci_devfn)) - found_multi = header_type & 0x80; - - early_read_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_DEVICE_ID, &did); - - early_read_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_CLASS_REVISION, &pci_class); - - DBG("%.2x:%.2x.%x Class %.4x: %.4x:%.4x", - current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn), - pci_class >> 16, vid, did); - if (pci_class & 0xff) - DBG(" (rev %.2x)", pci_class & 0xff); - DBG("\n"); - - if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) { - DBG(" Bridge: primary=%.2x, secondary=%.2x\n", - current_bus, sub_bus + 1); - pciauto_prescan_setup_bridge(hose, top_bus, current_bus, - pci_devfn, sub_bus); - DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n", - sub_bus + 1, - pciauto_lower_iospc, pciauto_lower_memspc); - sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1); - DBG("Back to bus %.2x\n", current_bus); - pciauto_postscan_setup_bridge(hose, top_bus, current_bus, - pci_devfn, sub_bus); - continue; - } else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) { - DBG(" CARDBUS Bridge: primary=%.2x, secondary=%.2x\n", - current_bus, sub_bus + 1); - DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn)); - /* Place CardBus Socket/ExCA registers */ - pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_0); - - pciauto_prescan_setup_cardbus_bridge(hose, top_bus, - current_bus, pci_devfn, sub_bus); - - DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n", - sub_bus + 1, - pciauto_lower_iospc, pciauto_lower_memspc); - sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1); - DBG("Back to bus %.2x, sub_bus is %x\n", current_bus, sub_bus); - pciauto_postscan_setup_cardbus_bridge(hose, top_bus, - current_bus, pci_devfn, sub_bus); - continue; - } else if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) { - - unsigned char prg_iface; - - early_read_config_byte(hose, top_bus, current_bus, - pci_devfn, PCI_CLASS_PROG, &prg_iface); - if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) { - DBG("Skipping legacy mode IDE controller\n"); - continue; - } - } - - /* - * Found a peripheral, enable some standard - * settings - */ - early_read_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_COMMAND, &cmdstat); - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_COMMAND, cmdstat | PCI_COMMAND_IO | - PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_LATENCY_TIMER, 0x80); - - /* Allocate PCI I/O and/or memory space */ - pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5); - } - return sub_bus; -} - -int __init -pciauto_assign_resources(int busno, struct pci_channel *hose) -{ - /* setup resource limits */ - io_resource_inuse = hose->io_resource; - mem_resource_inuse = hose->mem_resource; - - pciauto_lower_iospc = io_resource_inuse->start; - pciauto_upper_iospc = io_resource_inuse->end + 1; - pciauto_lower_memspc = mem_resource_inuse->start; - pciauto_upper_memspc = mem_resource_inuse->end + 1; - DBG("Autoconfig PCI channel 0x%p\n", hose); - DBG("Scanning bus %.2x, I/O 0x%.8x:0x%.8x, Mem 0x%.8x:0x%.8x\n", - busno, pciauto_lower_iospc, pciauto_upper_iospc, - pciauto_lower_memspc, pciauto_upper_memspc); - - return pciauto_bus_scan(hose, busno, busno); -} |