diff options
Diffstat (limited to 'arch/powerpc')
169 files changed, 8416 insertions, 1327 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 47682b67fd36..85195e48a9e6 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -323,7 +323,7 @@ config SWIOTLB config HOTPLUG_CPU bool "Support for enabling/disabling CPUs" - depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC) + depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC || PPC_POWERNV) ---help--- Say Y here to be able to disable and re-enable individual CPUs at runtime on SMP machines. @@ -345,7 +345,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE config KEXEC bool "kexec system call (EXPERIMENTAL)" - depends on (PPC_BOOK3S || FSL_BOOKE) && EXPERIMENTAL + depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !47x)) && EXPERIMENTAL help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot @@ -429,8 +429,7 @@ config ARCH_POPULATES_NODE_MAP def_bool y config SYS_SUPPORTS_HUGETLBFS - def_bool y - depends on PPC_BOOK3S_64 + bool source "mm/Kconfig" diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 067cb8480747..1b8a9c905cf7 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -141,9 +141,6 @@ config BOOTX_TEXT config PPC_EARLY_DEBUG bool "Early debugging (dangerous)" - # PPC_EARLY_DEBUG on 440 leaves AS=1 mappings above the TLB high water - # mark, which doesn't work with current 440 KVM. - depends on !KVM help Say Y to enable some early debugging facilities that may be available for your processor/board combination. Those facilities are hacks @@ -222,7 +219,9 @@ config PPC_EARLY_DEBUG_BEAT config PPC_EARLY_DEBUG_44x bool "Early serial debugging for IBM/AMCC 44x CPUs" - depends on 44x + # PPC_EARLY_DEBUG on 440 leaves AS=1 mappings above the TLB high water + # mark, which doesn't work with current 440 KVM. + depends on 44x && !KVM help Select this to enable early debugging for IBM 44x chips via the inbuilt serial port. If you enable this, ensure you set @@ -258,8 +257,35 @@ config PPC_EARLY_DEBUG_WSP depends on PPC_WSP select PPC_UDBG_16550 +config PPC_EARLY_DEBUG_PS3GELIC + bool "Early debugging through the PS3 Ethernet port" + depends on PPC_PS3 + select PS3GELIC_UDBG + help + Select this to enable early debugging for the PlayStation3 via + UDP broadcasts sent out through the Ethernet port. + +config PPC_EARLY_DEBUG_OPAL_RAW + bool "OPAL raw console" + depends on HVC_OPAL + help + Select this to enable early debugging for the PowerNV platform + using a "raw" console + +config PPC_EARLY_DEBUG_OPAL_HVSI + bool "OPAL hvsi console" + depends on HVC_OPAL + help + Select this to enable early debugging for the PowerNV platform + using an "hvsi" console + endchoice +config PPC_EARLY_DEBUG_OPAL + def_bool y + depends on PPC_EARLY_DEBUG_OPAL_RAW || PPC_EARLY_DEBUG_OPAL_HVSI + + config PPC_EARLY_DEBUG_HVSI_VTERMNO hex "vterm number to use with early debug HVSI" depends on PPC_EARLY_DEBUG_LPAR_HVSI @@ -268,6 +294,18 @@ config PPC_EARLY_DEBUG_HVSI_VTERMNO You probably want 0x30000000 for your first serial port and 0x30000001 for your second one +config PPC_EARLY_DEBUG_OPAL_VTERMNO + hex "vterm number to use with OPAL early debug" + depends on PPC_EARLY_DEBUG_OPAL + default "0" + help + This correspond to which /dev/hvcN you want to use for early + debug. + + On OPAL v1 (takeover) this should always be 0 + On OPAL v2, this will be 0 for network console and 1 or 2 for + the machine built-in serial ports. + config PPC_EARLY_DEBUG_44x_PHYSLOW hex "Low 32 bits of early debug UART physical address" depends on PPC_EARLY_DEBUG_44x diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index c26200b40a47..72ee8c1fba48 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -58,7 +58,7 @@ $(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \ libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c libfdtheader := fdt.h libfdt.h libfdt_internal.h -$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \ +$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o): \ $(addprefix $(obj)/,$(libfdtheader)) src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \ @@ -171,6 +171,7 @@ quiet_cmd_wrap = WRAP $@ $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) vmlinux image-$(CONFIG_PPC_PSERIES) += zImage.pseries +image-$(CONFIG_PPC_POWERNV) += zImage.pseries image-$(CONFIG_PPC_MAPLE) += zImage.maple image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries image-$(CONFIG_PPC_PS3) += dtbImage.ps3 diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts index 27bd267d631c..a7511f2d844d 100644 --- a/arch/powerpc/boot/dts/digsy_mtc.dts +++ b/arch/powerpc/boot/dts/digsy_mtc.dts @@ -23,19 +23,26 @@ soc5200@f0000000 { timer@600 { // General Purpose Timer + #gpio-cells = <2>; fsl,has-wdt; + gpio-controller; }; - rtc@800 { - status = "disabled"; + timer@610 { + #gpio-cells = <2>; + gpio-controller; }; - can@900 { + rtc@800 { status = "disabled"; }; - can@980 { - status = "disabled"; + spi@f00 { + msp430@0 { + compatible = "spidev"; + spi-max-frequency = <32000>; + reg = <0>; + }; }; psc@2000 { // PSC1 @@ -73,11 +80,16 @@ }; i2c@3d00 { - rtc@50 { + eeprom@50 { compatible = "at,24c08"; reg = <0x50>; }; + rtc@56 { + compatible = "mc,rv3029c2"; + reg = <0x56>; + }; + rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; @@ -90,11 +102,22 @@ }; pci@f0000d00 { - status = "disabled"; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; }; localbus { - ranges = <0 0 0xff000000 0x1000000>; + ranges = <0 0 0xff000000 0x1000000 + 4 0 0x60000000 0x0001000>; // 16-bit flash device at LocalPlus Bus CS0 flash@0,0 { @@ -122,5 +145,25 @@ reg = <0x00f00000 0x100000>; }; }; + + can@4,0 { + compatible = "nxp,sja1000"; + reg = <4 0x000 0x80>; + nxp,external-clock-frequency = <24000000>; + interrupts = <1 2 3>; // Level-low + }; + + can@4,100 { + compatible = "nxp,sja1000"; + reg = <4 0x100 0x80>; + nxp,external-clock-frequency = <24000000>; + interrupts = <1 2 3>; // Level-low + }; + + serial@4,200 { + compatible = "nxp,sc28l92"; + reg = <4 0x200 0x10>; + interrupts = <1 3 3>; + }; }; }; diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts index 83f4b79dff85..2266bbb303d0 100644 --- a/arch/powerpc/boot/dts/gef_ppc9a.dts +++ b/arch/powerpc/boot/dts/gef_ppc9a.dts @@ -269,14 +269,16 @@ enet0: ethernet@24000 { #address-cells = <1>; #size-cells = <1>; + cell-index = <0>; device_type = "network"; - model = "eTSEC"; + model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy0>; phy-connection-type = "gmii"; @@ -290,25 +292,48 @@ interrupt-parent = <&gef_pic>; interrupts = <0x9 0x4>; reg = <1>; + device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&gef_pic>; interrupts = <0x8 0x4>; reg = <3>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; }; enet1: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; device_type = "network"; - model = "eTSEC"; + model = "TSEC"; compatible = "gianfar"; reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>; + interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; phy-handle = <&phy2>; phy-connection-type = "gmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts index fc3a331dd392..429e87d9acef 100644 --- a/arch/powerpc/boot/dts/gef_sbc310.dts +++ b/arch/powerpc/boot/dts/gef_sbc310.dts @@ -267,14 +267,16 @@ enet0: ethernet@24000 { #address-cells = <1>; #size-cells = <1>; + cell-index = <0>; device_type = "network"; - model = "eTSEC"; + model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy0>; phy-connection-type = "gmii"; @@ -288,25 +290,48 @@ interrupt-parent = <&gef_pic>; interrupts = <0x9 0x4>; reg = <1>; + device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&gef_pic>; interrupts = <0x8 0x4>; reg = <3>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; }; enet1: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; device_type = "network"; - model = "eTSEC"; + model = "TSEC"; compatible = "gianfar"; reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>; + interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; phy-handle = <&phy2>; phy-connection-type = "gmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index c0671cc98125..d81201ac2cad 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -267,14 +267,16 @@ enet0: ethernet@24000 { #address-cells = <1>; #size-cells = <1>; + cell-index = <0>; device_type = "network"; - model = "eTSEC"; + model = "TSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy0>; phy-connection-type = "gmii"; @@ -288,25 +290,48 @@ interrupt-parent = <&gef_pic>; interrupts = <0x9 0x4>; reg = <1>; + device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&gef_pic>; interrupts = <0x8 0x4>; reg = <3>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; }; enet1: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; device_type = "network"; - model = "eTSEC"; + model = "TSEC"; compatible = "gianfar"; reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>; + interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; phy-handle = <&phy2>; phy-connection-type = "gmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/hcu4.dts b/arch/powerpc/boot/dts/hcu4.dts deleted file mode 100644 index 7988598da4c9..000000000000 --- a/arch/powerpc/boot/dts/hcu4.dts +++ /dev/null @@ -1,168 +0,0 @@ -/* -* Device Tree Source for Netstal Maschinen HCU4 -* based on the IBM Walnut -* -* Copyright 2008 -* Niklaus Giger <niklaus.giger@member.fsf.org> -* -* Copyright 2007 IBM Corp. -* Josh Boyer <jwboyer@linux.vnet.ibm.com> -* -* This file is licensed under the terms of the GNU General Public -* License version 2. This program is licensed "as is" without -* any warranty of any kind, whether express or implied. -*/ - -/dts-v1/; - -/ { - #address-cells = <0x1>; - #size-cells = <0x1>; - model = "netstal,hcu4"; - compatible = "netstal,hcu4"; - dcr-parent = <0x1>; - - aliases { - ethernet0 = "/plb/opb/ethernet@ef600800"; - serial0 = "/plb/opb/serial@ef600300"; - }; - - cpus { - #address-cells = <0x1>; - #size-cells = <0x0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405GPr"; - reg = <0x0>; - clock-frequency = <0>; /* Filled in by U-Boot */ - timebase-frequency = <0x0>; /* Filled in by U-Boot */ - i-cache-line-size = <0x20>; - d-cache-line-size = <0x20>; - i-cache-size = <0x4000>; - d-cache-size = <0x4000>; - dcr-controller; - dcr-access-method = "native"; - linux,phandle = <0x1>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x0>; /* Filled in by U-Boot */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <0x0>; - dcr-reg = <0xc0 0x9>; - #address-cells = <0x0>; - #size-cells = <0x0>; - #interrupt-cells = <0x2>; - linux,phandle = <0x2>; - }; - - plb { - compatible = "ibm,plb3"; - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges; - clock-frequency = <0x0>; /* Filled in by U-Boot */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-405gp"; - dcr-reg = <0x10 0x2>; - }; - - MAL: mcmal { - compatible = "ibm,mcmal-405gp", "ibm,mcmal"; - dcr-reg = <0x180 0x62>; - num-tx-chans = <0x1>; - num-rx-chans = <0x1>; - interrupt-parent = <0x2>; - interrupts = <0xb 0x4 0xc 0x4 0xa 0x4 0xd 0x4 0xe 0x4>; - linux,phandle = <0x3>; - }; - - POB0: opb { - compatible = "ibm,opb-405gp", "ibm,opb"; - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges = <0xef600000 0xef600000 0xa00000>; - dcr-reg = <0xa0 0x5>; - clock-frequency = <0x0>; /* Filled in by U-Boot */ - - UART0: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x8>; - virtual-reg = <0xef600300>; - clock-frequency = <0x0>;/* Filled in by U-Boot */ - current-speed = <0>; /* Filled in by U-Boot */ - interrupt-parent = <0x2>; - interrupts = <0x0 0x4>; - }; - - IIC: i2c@ef600500 { - compatible = "ibm,iic-405gp", "ibm,iic"; - reg = <0xef600500 0x11>; - interrupt-parent = <0x2>; - interrupts = <0x2 0x4>; - }; - - GPIO: gpio@ef600700 { - compatible = "ibm,gpio-405gp"; - reg = <0xef600700 0x20>; - }; - - EMAC: ethernet@ef600800 { - device_type = "network"; - compatible = "ibm,emac-405gp", "ibm,emac"; - interrupt-parent = <0x2>; - interrupts = <0xf 0x4 0x9 0x4>; - local-mac-address = [00 00 00 00 00 00]; - reg = <0xef600800 0x70>; - mal-device = <0x3>; - mal-tx-channel = <0x0>; - mal-rx-channel = <0x0>; - cell-index = <0x0>; - max-frame-size = <0x5dc>; - rx-fifo-size = <0x1000>; - tx-fifo-size = <0x800>; - phy-mode = "rmii"; - phy-map = <0x1>; - }; - }; - - EBC0: ebc { - compatible = "ibm,ebc-405gp", "ibm,ebc"; - dcr-reg = <0x12 0x2>; - #address-cells = <0x2>; - #size-cells = <0x1>; - clock-frequency = <0x0>; /* Filled in by U-Boot */ - - sram@0,0 { - reg = <0x0 0x0 0x80000>; - }; - - flash@0,80000 { - compatible = "jedec-flash"; - bank-width = <0x1>; - reg = <0x0 0x80000 0x80000>; - #address-cells = <0x1>; - #size-cells = <0x1>; - - partition@0 { - label = "OpenBIOS"; - reg = <0x0 0x80000>; - read-only; - }; - }; - }; - }; - - chosen { - linux,stdout-path = "/plb/opb/serial@ef600300"; - }; -}; diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts index bdb7fc0fa332..296c572ea605 100644 --- a/arch/powerpc/boot/dts/ksi8560.dts +++ b/arch/powerpc/boot/dts/ksi8560.dts @@ -306,7 +306,7 @@ localbus@fdf05000 { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,mpc8560-localbus"; + compatible = "fsl,mpc8560-localbus", "simple-bus"; reg = <0xfdf05000 0x68>; ranges = <0x0 0x0 0xe0000000 0x00800000 diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts index 1360d2f69024..ededaf5ac015 100644 --- a/arch/powerpc/boot/dts/mgcoge.dts +++ b/arch/powerpc/boot/dts/mgcoge.dts @@ -213,6 +213,15 @@ linux,network-index = <2>; fsl,cpm-command = <0x16200300>; }; + + usb@11b60 { + compatible = "fsl,mpc8272-cpm-usb"; + mode = "peripheral"; + reg = <0x11b60 0x40 0x8b00 0x100>; + interrupts = <11 8>; + interrupt-parent = <&PIC>; + usb-clock = <5>; + }; }; cpm2_pio_c: gpio-controller@10d40 { diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi index bc27548e895d..7ab286ab5300 100644 --- a/arch/powerpc/boot/dts/mpc5200b.dtsi +++ b/arch/powerpc/boot/dts/mpc5200b.dtsi @@ -147,6 +147,8 @@ }; spi@f00 { + #address-cells = <1>; + #size-cells = <0>; compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <0xf00 0x20>; interrupts = <2 13 0 2 14 0>; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index b53d1df11e2d..505dc842d808 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -390,7 +390,8 @@ #address-cells = <2>; #size-cells = <1>; compatible = "fsl,mpc8349e-localbus", - "fsl,pq2pro-localbus"; + "fsl,pq2pro-localbus", + "simple-bus"; reg = <0xe0005000 0xd8>; ranges = <0x0 0x0 0xfe000000 0x1000000 /* flash */ 0x1 0x0 0xf8000000 0x20000 /* VSC 7385 */ diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts index 1be9743ab5e0..b9b8719a6204 100644 --- a/arch/powerpc/boot/dts/p1022ds.dts +++ b/arch/powerpc/boot/dts/p1022ds.dts @@ -150,7 +150,7 @@ }; board-control@3,0 { - compatible = "fsl,p1022ds-pixis"; + compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis"; reg = <3 0 0x30>; interrupt-parent = <&mpic>; /* diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts index dae403100f2f..66f03d6477b2 100644 --- a/arch/powerpc/boot/dts/p2020ds.dts +++ b/arch/powerpc/boot/dts/p2020ds.dts @@ -118,6 +118,11 @@ }; }; + board-control@3,0 { + compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis"; + reg = <0x3 0x0 0x30>; + }; + nand@4,0 { compatible = "fsl,elbc-fcm-nand"; reg = <0x4 0x0 0x40000>; diff --git a/arch/powerpc/boot/dts/p2040rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts index 7d84e391c632..79b6895027c0 100644 --- a/arch/powerpc/boot/dts/p2040rdb.dts +++ b/arch/powerpc/boot/dts/p2041rdb.dts @@ -1,5 +1,5 @@ /* - * P2040RDB Device Tree Source + * P2041RDB Device Tree Source * * Copyright 2011 Freescale Semiconductor Inc. * @@ -32,11 +32,11 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/include/ "p2040si.dtsi" +/include/ "p2041si.dtsi" / { - model = "fsl,P2040RDB"; - compatible = "fsl,P2040RDB"; + model = "fsl,P2041RDB"; + compatible = "fsl,P2041RDB"; #address-cells = <2>; #size-cells = <2>; interrupt-parent = <&mpic>; @@ -45,6 +45,10 @@ device_type = "memory"; }; + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + soc: soc@ffe000000 { spi@110000 { flash@0 { @@ -97,13 +101,8 @@ }; }; - usb0: usb@210000 { - phy_type = "utmi"; - }; - usb1: usb@211000 { dr_mode = "host"; - phy_type = "utmi"; }; }; diff --git a/arch/powerpc/boot/dts/p2040si.dtsi b/arch/powerpc/boot/dts/p2041si.dtsi index 5fdbb24c0763..f7492edd0dfd 100644 --- a/arch/powerpc/boot/dts/p2040si.dtsi +++ b/arch/powerpc/boot/dts/p2041si.dtsi @@ -1,5 +1,5 @@ /* - * P2040 Silicon Device Tree Source + * P2041 Silicon Device Tree Source * * Copyright 2011 Freescale Semiconductor Inc. * @@ -35,13 +35,14 @@ /dts-v1/; / { - compatible = "fsl,P2040"; + compatible = "fsl,P2041"; #address-cells = <2>; #size-cells = <2>; interrupt-parent = <&mpic>; aliases { ccsr = &soc; + dcsr = &dcsr; serial0 = &serial0; serial1 = &serial1; @@ -109,6 +110,74 @@ }; }; + dcsr: dcsr@f00000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + interrupt-parent = <&mpic>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@42000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x42000 0x1000>; + }; + dcsr-cpu-sb-proxy@43000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x43000 0x1000>; + }; + }; + soc: soc@ffe000000 { #address-cells = <1>; #size-cells = <1>; @@ -128,14 +197,14 @@ fsl,num-laws = <32>; }; - memory-controller@8000 { + ddr: memory-controller@8000 { compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; reg = <0x8000 0x1000>; interrupts = <16 2 1 23>; }; cpc: l3-cache-controller@10000 { - compatible = "fsl,p2040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; reg = <0x10000 0x1000>; interrupts = <16 2 1 27>; }; @@ -226,7 +295,7 @@ }; clockgen: global-utilities@e1000 { - compatible = "fsl,p2040-clockgen", "fsl,qoriq-clockgen-1.0"; + compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0"; reg = <0xe1000 0x1000>; clock-frequency = <0>; }; @@ -238,45 +307,45 @@ }; sfp: sfp@e8000 { - compatible = "fsl,p2040-sfp", "fsl,qoriq-sfp-1.0"; + compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0"; reg = <0xe8000 0x1000>; }; serdes: serdes@ea000 { - compatible = "fsl,p2040-serdes"; + compatible = "fsl,p2041-serdes"; reg = <0xea000 0x1000>; }; dma0: dma@100300 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,p2040-dma", "fsl,eloplus-dma"; + compatible = "fsl,p2041-dma", "fsl,eloplus-dma"; reg = <0x100300 0x4>; ranges = <0x0 0x100100 0x200>; cell-index = <0>; dma-channel@0 { - compatible = "fsl,p2040-dma-channel", + compatible = "fsl,p2041-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x0 0x80>; cell-index = <0>; interrupts = <28 2 0 0>; }; dma-channel@80 { - compatible = "fsl,p2040-dma-channel", + compatible = "fsl,p2041-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x80 0x80>; cell-index = <1>; interrupts = <29 2 0 0>; }; dma-channel@100 { - compatible = "fsl,p2040-dma-channel", + compatible = "fsl,p2041-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x100 0x80>; cell-index = <2>; interrupts = <30 2 0 0>; }; dma-channel@180 { - compatible = "fsl,p2040-dma-channel", + compatible = "fsl,p2041-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x180 0x80>; cell-index = <3>; @@ -287,33 +356,33 @@ dma1: dma@101300 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,p2040-dma", "fsl,eloplus-dma"; + compatible = "fsl,p2041-dma", "fsl,eloplus-dma"; reg = <0x101300 0x4>; ranges = <0x0 0x101100 0x200>; cell-index = <1>; dma-channel@0 { - compatible = "fsl,p2040-dma-channel", + compatible = "fsl,p2041-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x0 0x80>; cell-index = <0>; interrupts = <32 2 0 0>; }; dma-channel@80 { - compatible = "fsl,p2040-dma-channel", + compatible = "fsl,p2041-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x80 0x80>; cell-index = <1>; interrupts = <33 2 0 0>; }; dma-channel@100 { - compatible = "fsl,p2040-dma-channel", + compatible = "fsl,p2041-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x100 0x80>; cell-index = <2>; interrupts = <34 2 0 0>; }; dma-channel@180 { - compatible = "fsl,p2040-dma-channel", + compatible = "fsl,p2041-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x180 0x80>; cell-index = <3>; @@ -324,22 +393,20 @@ spi@110000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,p2040-espi", "fsl,mpc8536-espi"; + compatible = "fsl,p2041-espi", "fsl,mpc8536-espi"; reg = <0x110000 0x1000>; interrupts = <53 0x2 0 0>; fsl,espi-num-chipselects = <4>; - }; sdhc: sdhc@114000 { - compatible = "fsl,p2040-esdhc", "fsl,esdhc"; + compatible = "fsl,p2041-esdhc", "fsl,esdhc"; reg = <0x114000 0x1000>; interrupts = <48 2 0 0>; sdhci,auto-cmd12; clock-frequency = <0>; }; - i2c@118000 { #address-cells = <1>; #size-cells = <0>; @@ -417,7 +484,7 @@ }; gpio0: gpio@130000 { - compatible = "fsl,p2040-gpio", "fsl,qoriq-gpio"; + compatible = "fsl,p2041-gpio", "fsl,qoriq-gpio"; reg = <0x130000 0x1000>; interrupts = <55 2 0 0>; #gpio-cells = <2>; @@ -425,32 +492,34 @@ }; usb0: usb@210000 { - compatible = "fsl,p2040-usb2-mph", + compatible = "fsl,p2041-usb2-mph", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; reg = <0x210000 0x1000>; #address-cells = <1>; #size-cells = <0>; interrupts = <44 0x2 0 0>; + phy_type = "utmi"; port0; }; usb1: usb@211000 { - compatible = "fsl,p2040-usb2-dr", + compatible = "fsl,p2041-usb2-dr", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; reg = <0x211000 0x1000>; #address-cells = <1>; #size-cells = <0>; interrupts = <45 0x2 0 0>; + phy_type = "utmi"; }; sata@220000 { - compatible = "fsl,p2040-sata", "fsl,pq-sata-v2"; + compatible = "fsl,p2041-sata", "fsl,pq-sata-v2"; reg = <0x220000 0x1000>; interrupts = <68 0x2 0 0>; }; sata@221000 { - compatible = "fsl,p2040-sata", "fsl,pq-sata-v2"; + compatible = "fsl,p2041-sata", "fsl,pq-sata-v2"; reg = <0x221000 0x1000>; interrupts = <69 0x2 0 0>; }; @@ -534,19 +603,19 @@ }; localbus@ffe124000 { - compatible = "fsl,p2040-elbc", "fsl,elbc", "simple-bus"; + compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus"; interrupts = <25 2 0 0>; #address-cells = <2>; #size-cells = <1>; }; pci0: pcie@ffe200000 { - compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2"; + compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; bus-range = <0x0 0xff>; - clock-frequency = <0x1fca055>; + clock-frequency = <33333333>; fsl,msi = <&msi0>; interrupts = <16 2 1 15>; pcie@0 { @@ -568,12 +637,12 @@ }; pci1: pcie@ffe201000 { - compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2"; + compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; bus-range = <0 0xff>; - clock-frequency = <0x1fca055>; + clock-frequency = <33333333>; fsl,msi = <&msi1>; interrupts = <16 2 1 14>; pcie@0 { @@ -595,12 +664,12 @@ }; pci2: pcie@ffe202000 { - compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2"; + compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; bus-range = <0x0 0xff>; - clock-frequency = <0x1fca055>; + clock-frequency = <33333333>; fsl,msi = <&msi2>; interrupts = <16 2 1 13>; pcie@0 { diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts index 69cae674f396..bbd113b49a8f 100644 --- a/arch/powerpc/boot/dts/p3041ds.dts +++ b/arch/powerpc/boot/dts/p3041ds.dts @@ -45,6 +45,10 @@ device_type = "memory"; }; + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + soc: soc@ffe000000 { spi@110000 { flash@0 { @@ -147,8 +151,8 @@ }; board-control@3,0 { - compatible = "fsl,p3041ds-pixis"; - reg = <3 0 0x20>; + compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; }; }; diff --git a/arch/powerpc/boot/dts/p3041si.dtsi b/arch/powerpc/boot/dts/p3041si.dtsi index 8b695801f505..87130b732bc7 100644 --- a/arch/powerpc/boot/dts/p3041si.dtsi +++ b/arch/powerpc/boot/dts/p3041si.dtsi @@ -42,6 +42,7 @@ aliases { ccsr = &soc; + dcsr = &dcsr; serial0 = &serial0; serial1 = &serial1; @@ -114,6 +115,74 @@ }; }; + dcsr: dcsr@f00000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + interrupt-parent = <&mpic>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p43041-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p43041-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p43041-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p43041-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@42000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x42000 0x1000>; + }; + dcsr-cpu-sb-proxy@43000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x43000 0x1000>; + }; + }; + soc: soc@ffe000000 { #address-cells = <1>; #size-cells = <1>; @@ -133,7 +202,7 @@ fsl,num-laws = <32>; }; - memory-controller@8000 { + ddr: memory-controller@8000 { compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; reg = <0x8000 0x1000>; interrupts = <16 2 1 23>; diff --git a/arch/powerpc/boot/dts/p3060qds.dts b/arch/powerpc/boot/dts/p3060qds.dts new file mode 100644 index 000000000000..08b9193213e7 --- /dev/null +++ b/arch/powerpc/boot/dts/p3060qds.dts @@ -0,0 +1,238 @@ +/* + * P3060QDS Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p3060si.dtsi" + +/ { + model = "fsl,P3060QDS"; + compatible = "fsl,P3060QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + soc: soc@ffe000000 { + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,en25q32b"; + reg = <1>; + spi-max-frequency = <40000000>; /* input clock */ + partition@spi1 { + label = "spi1"; + reg = <0x00000000 0x00400000>; + }; + }; + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45db081d"; + reg = <2>; + spi-max-frequency = <40000000>; /* input clock */ + partition@spi1 { + label = "spi2"; + reg = <0x00000000 0x00100000>; + }; + }; + flash@3 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,sst25wf040"; + reg = <3>; + spi-max-frequency = <40000000>; /* input clock */ + partition@spi3 { + label = "spi3"; + reg = <0x00000000 0x00080000>; + }; + }; + }; + + i2c@118000 { + eeprom@51 { + compatible = "at24,24c256"; + reg = <0x51>; + }; + eeprom@53 { + compatible = "at24,24c256"; + reg = <0x53>; + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + }; + + usb0: usb@210000 { + phy_type = "ulpi"; + }; + + usb1: usb@211000 { + dr_mode = "host"; + phy_type = "ulpi"; + }; + }; + + rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xffa00000 0x00040000 + 3 0 0xf 0xffdf0000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + label = "NAND U-Boot Image"; + reg = <0x0 0x02000000>; + read-only; + }; + + partition@2000000 { + label = "NAND Root File System"; + reg = <0x02000000 0x10000000>; + }; + + partition@12000000 { + label = "NAND Compressed RFS Image"; + reg = <0x12000000 0x08000000>; + }; + + partition@1a000000 { + label = "NAND Linux Kernel Image"; + reg = <0x1a000000 0x04000000>; + }; + + partition@1e000000 { + label = "NAND DTB Image"; + reg = <0x1e000000 0x01000000>; + }; + + partition@1f000000 { + label = "NAND Writable User area"; + reg = <0x1f000000 0x21000000>; + }; + }; + + board-control@3,0 { + compatible = "fsl,p3060qds-fpga", "fsl,fpga-qixis"; + reg = <3 0 0x100>; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/p3060si.dtsi b/arch/powerpc/boot/dts/p3060si.dtsi new file mode 100644 index 000000000000..68947e157bbc --- /dev/null +++ b/arch/powerpc/boot/dts/p3060si.dtsi @@ -0,0 +1,719 @@ +/* + * P3060 Silicon Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/ { + compatible = "fsl,P3060"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500mc@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e500mc@1 { + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu4: PowerPC,e500mc@4 { + device_type = "cpu"; + reg = <4>; + next-level-cache = <&L2_4>; + L2_4: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu5: PowerPC,e500mc@5 { + device_type = "cpu"; + reg = <5>; + next-level-cache = <&L2_5>; + L2_5: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu6: PowerPC,e500mc@6 { + device_type = "cpu"; + reg = <6>; + next-level-cache = <&L2_6>; + L2_6: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu7: PowerPC,e500mc@7 { + device_type = "cpu"; + reg = <7>; + next-level-cache = <&L2_7>; + L2_7: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; + + dcsr: dcsr@f00000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + interrupt-parent = <&mpic>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@44000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu4>; + reg = <0x44000 0x1000>; + }; + dcsr-cpu-sb-proxy@45000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu5>; + reg = <0x45000 0x1000>; + }; + dcsr-cpu-sb-proxy@46000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu6>; + reg = <0x46000 0x1000>; + }; + dcsr-cpu-sb-proxy@47000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu7>; + reg = <0x47000 0x1000>; + }; + }; + + soc: soc@ffe000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p3060-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000>; + interrupts = <16 2 1 27>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x5000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <4>; + reg = <0x40000 0x40000>; + compatible = "fsl,mpic", "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi0: msi@41600 { + compatible = "fsl,mpic-msi"; + reg = <0x41600 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; + }; + + msi1: msi@41800 { + compatible = "fsl,mpic-msi"; + reg = <0x41800 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe8 0 0 0 + 0xe9 0 0 0 + 0xea 0 0 0 + 0xeb 0 0 0 + 0xec 0 0 0 + 0xed 0 0 0 + 0xee 0 0 0 + 0xef 0 0 0>; + }; + + msi2: msi@41a00 { + compatible = "fsl,mpic-msi"; + reg = <0x41a00 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xf0 0 0 0 + 0xf1 0 0 0 + 0xf2 0 0 0 + 0xf3 0 0 0 + 0xf4 0 0 0 + 0xf5 0 0 0 + 0xf6 0 0 0 + 0xf7 0 0 0>; + }; + + rmu: rmu@d3000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,srio-rmu"; + reg = <0xd3000 0x500>; + ranges = <0x0 0xd3000 0x500>; + + message-unit@0 { + compatible = "fsl,srio-msg-unit"; + reg = <0x0 0x100>; + interrupts = < + 60 2 0 0 /* msg1_tx_irq */ + 61 2 0 0>;/* msg1_rx_irq */ + }; + message-unit@100 { + compatible = "fsl,srio-msg-unit"; + reg = <0x100 0x100>; + interrupts = < + 62 2 0 0 /* msg2_tx_irq */ + 63 2 0 0>;/* msg2_rx_irq */ + }; + doorbell-unit@400 { + compatible = "fsl,srio-dbell-unit"; + reg = <0x400 0x80>; + interrupts = < + 56 2 0 0 /* bell_outb_irq */ + 57 2 0 0>;/* bell_inb_irq */ + }; + port-write-unit@4e0 { + compatible = "fsl,srio-port-write-unit"; + reg = <0x4e0 0x20>; + interrupts = <16 2 1 11>; + }; + }; + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p3060-serdes"; + reg = <0xea000 0x1000>; + }; + + dma0: dma@100300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p3060-dma", "fsl,eloplus-dma"; + reg = <0x100300 0x4>; + ranges = <0x0 0x100100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,p3060-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <28 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,p3060-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <29 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,p3060-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <30 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,p3060-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <31 2 0 0>; + }; + }; + + dma1: dma@101300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p3060-dma", "fsl,eloplus-dma"; + reg = <0x101300 0x4>; + ranges = <0x0 0x101100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,p3060-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <32 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,p3060-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <33 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,p3060-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <34 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,p3060-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <35 2 0 0>; + }; + }; + + spi@110000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,p3060-espi", "fsl,mpc8536-espi"; + reg = <0x110000 0x1000>; + interrupts = <53 0x2 0 0>; + fsl,espi-num-chipselects = <4>; + }; + + i2c@118000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x118000 0x100>; + interrupts = <38 2 0 0>; + dfsrr; + }; + + i2c@118100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x118100 0x100>; + interrupts = <38 2 0 0>; + dfsrr; + }; + + i2c@119000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <2>; + compatible = "fsl-i2c"; + reg = <0x119000 0x100>; + interrupts = <39 2 0 0>; + dfsrr; + }; + + i2c@119100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <3>; + compatible = "fsl-i2c"; + reg = <0x119100 0x100>; + interrupts = <39 2 0 0>; + dfsrr; + }; + + serial0: serial@11c500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11c500 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; + }; + + serial1: serial@11c600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11c600 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; + }; + + serial2: serial@11d500 { + cell-index = <2>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11d500 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; + }; + + serial3: serial@11d600 { + cell-index = <3>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11d600 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; + }; + + gpio0: gpio@130000 { + compatible = "fsl,p3060-gpio", "fsl,qoriq-gpio"; + reg = <0x130000 0x1000>; + interrupts = <55 2 0 0>; + #gpio-cells = <2>; + gpio-controller; + }; + + usb0: usb@210000 { + compatible = "fsl,p3060-usb2-mph", + "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + reg = <0x210000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x2 0 0>; + }; + + usb1: usb@211000 { + compatible = "fsl,p3060-usb2-dr", + "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + reg = <0x211000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <45 0x2 0 0>; + }; + + crypto: crypto@300000 { + compatible = "fsl,sec-v4.1", "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupt-parent = <&mpic>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.1-rtic", "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; + }; + + sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <93 2 0 0>; + }; + }; + + rapidio@ffe0c0000 { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; + }; + + localbus@ffe124000 { + compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; + }; + + pci0: pcie@ffe200000 { + compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + fsl,msi = <&msi0>; + interrupts = <16 2 1 15>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; + }; + + pci1: pcie@ffe201000 { + compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + fsl,msi = <&msi1>; + interrupts = <16 2 1 14>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts index eb11098bb687..c7916dc28014 100644 --- a/arch/powerpc/boot/dts/p4080ds.dts +++ b/arch/powerpc/boot/dts/p4080ds.dts @@ -45,6 +45,10 @@ device_type = "memory"; }; + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + soc: soc@ffe000000 { spi@110000 { flash@0 { @@ -108,7 +112,8 @@ localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x1000>; - ranges = <0 0 0xf 0xe8000000 0x08000000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 3 0 0xf 0xffdf0000 0x00008000>; flash@0,0 { compatible = "cfi-flash"; @@ -116,6 +121,11 @@ bank-width = <2>; device-width = <2>; }; + + board-control@3,0 { + compatible = "fsl,p4080ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + }; }; pci0: pcie@ffe200000 { diff --git a/arch/powerpc/boot/dts/p4080si.dtsi b/arch/powerpc/boot/dts/p4080si.dtsi index b71051f506c1..f20c01ab2473 100644 --- a/arch/powerpc/boot/dts/p4080si.dtsi +++ b/arch/powerpc/boot/dts/p4080si.dtsi @@ -42,6 +42,7 @@ aliases { ccsr = &soc; + dcsr = &dcsr; serial0 = &serial0; serial1 = &serial1; @@ -77,7 +78,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu0: PowerPC,4080@0 { + cpu0: PowerPC,e500mc@0 { device_type = "cpu"; reg = <0>; next-level-cache = <&L2_0>; @@ -85,7 +86,7 @@ next-level-cache = <&cpc>; }; }; - cpu1: PowerPC,4080@1 { + cpu1: PowerPC,e500mc@1 { device_type = "cpu"; reg = <1>; next-level-cache = <&L2_1>; @@ -93,7 +94,7 @@ next-level-cache = <&cpc>; }; }; - cpu2: PowerPC,4080@2 { + cpu2: PowerPC,e500mc@2 { device_type = "cpu"; reg = <2>; next-level-cache = <&L2_2>; @@ -101,7 +102,7 @@ next-level-cache = <&cpc>; }; }; - cpu3: PowerPC,4080@3 { + cpu3: PowerPC,e500mc@3 { device_type = "cpu"; reg = <3>; next-level-cache = <&L2_3>; @@ -109,7 +110,7 @@ next-level-cache = <&cpc>; }; }; - cpu4: PowerPC,4080@4 { + cpu4: PowerPC,e500mc@4 { device_type = "cpu"; reg = <4>; next-level-cache = <&L2_4>; @@ -117,7 +118,7 @@ next-level-cache = <&cpc>; }; }; - cpu5: PowerPC,4080@5 { + cpu5: PowerPC,e500mc@5 { device_type = "cpu"; reg = <5>; next-level-cache = <&L2_5>; @@ -125,7 +126,7 @@ next-level-cache = <&cpc>; }; }; - cpu6: PowerPC,4080@6 { + cpu6: PowerPC,e500mc@6 { device_type = "cpu"; reg = <6>; next-level-cache = <&L2_6>; @@ -133,7 +134,7 @@ next-level-cache = <&cpc>; }; }; - cpu7: PowerPC,4080@7 { + cpu7: PowerPC,e500mc@7 { device_type = "cpu"; reg = <7>; next-level-cache = <&L2_7>; @@ -143,6 +144,99 @@ }; }; + dcsr: dcsr@f00000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + interrupt-parent = <&mpic>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-ddr@13000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr2>; + reg = <0x13000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@42000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x42000 0x1000>; + }; + dcsr-cpu-sb-proxy@43000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x43000 0x1000>; + }; + dcsr-cpu-sb-proxy@44000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu4>; + reg = <0x44000 0x1000>; + }; + dcsr-cpu-sb-proxy@45000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu5>; + reg = <0x45000 0x1000>; + }; + dcsr-cpu-sb-proxy@46000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu6>; + reg = <0x46000 0x1000>; + }; + dcsr-cpu-sb-proxy@47000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu7>; + reg = <0x47000 0x1000>; + }; + }; + soc: soc@ffe000000 { #address-cells = <1>; #size-cells = <1>; @@ -162,13 +256,13 @@ fsl,num-laws = <32>; }; - memory-controller@8000 { + ddr1: memory-controller@8000 { compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller"; reg = <0x8000 0x1000>; interrupts = <16 2 1 23>; }; - memory-controller@9000 { + ddr2: memory-controller@9000 { compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller"; reg = <0x9000 0x1000>; interrupts = <16 2 1 22>; diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts index 8366e2fd2fba..e6d40999ccd7 100644 --- a/arch/powerpc/boot/dts/p5020ds.dts +++ b/arch/powerpc/boot/dts/p5020ds.dts @@ -45,6 +45,10 @@ device_type = "memory"; }; + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + soc: soc@ffe000000 { spi@110000 { flash@0 { @@ -147,8 +151,8 @@ }; board-control@3,0 { - compatible = "fsl,p5020ds-pixis"; - reg = <3 0 0x20>; + compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; }; }; diff --git a/arch/powerpc/boot/dts/p5020si.dtsi b/arch/powerpc/boot/dts/p5020si.dtsi index 5e6048ec55bb..e7948ad71fa3 100644 --- a/arch/powerpc/boot/dts/p5020si.dtsi +++ b/arch/powerpc/boot/dts/p5020si.dtsi @@ -42,6 +42,7 @@ aliases { ccsr = &soc; + dcsr = &dcsr; serial0 = &serial0; serial1 = &serial1; @@ -98,6 +99,69 @@ }; }; + dcsr: dcsr@f00000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + interrupt-parent = <&mpic>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-ddr@13000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr2>; + reg = <0x13000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + }; + soc: soc@ffe000000 { #address-cells = <1>; #size-cells = <1>; @@ -117,13 +181,13 @@ fsl,num-laws = <32>; }; - memory-controller@8000 { + ddr1: memory-controller@8000 { compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; reg = <0x8000 0x1000>; interrupts = <16 2 1 23>; }; - memory-controller@9000 { + ddr2: memory-controller@9000 { compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; reg = <0x9000 0x1000>; interrupts = <16 2 1 22>; diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts index 9e13ed8a1193..72078eb15616 100644 --- a/arch/powerpc/boot/dts/sbc8560.dts +++ b/arch/powerpc/boot/dts/sbc8560.dts @@ -331,7 +331,7 @@ }; localbus@ff705000 { - compatible = "fsl,mpc8560-localbus"; + compatible = "fsl,mpc8560-localbus", "simple-bus"; #address-cells = <2>; #size-cells = <1>; reg = <0xff705000 0x100>; // BRx, ORx, etc. diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts index 64923245f0e5..30bb4753577a 100644 --- a/arch/powerpc/boot/dts/yosemite.dts +++ b/arch/powerpc/boot/dts/yosemite.dts @@ -138,6 +138,42 @@ clock-frequency = <0>; /* Filled in by zImage */ interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "ramdisk"; + reg = <0x00200000 0x01400000>; + }; + partition@1600000 { + label = "jffs2"; + reg = <0x01600000 0x00400000>; + }; + partition@1a00000 { + label = "user"; + reg = <0x01a00000 0x02540000>; + }; + partition@3f40000 { + label = "env"; + reg = <0x03f40000 0x00040000>; + }; + partition@3f80000 { + label = "u-boot"; + reg = <0x03f80000 0x00080000>; + }; + }; }; UART0: serial@ef600300 { diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig deleted file mode 100644 index dba263c1d3a2..000000000000 --- a/arch/powerpc/configs/40x/hcu4_defconfig +++ /dev/null @@ -1,81 +0,0 @@ -CONFIG_40x=y -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_HCU4=y -# CONFIG_WALNUT is not set -CONFIG_SPARSE_IRQ=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_CONNECTOR=y -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_OF_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=m -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_PROC_DEVICETREE=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_NETDEVICES=y -CONFIG_ETHERNET=y -CONFIG_NET_VENDOR_IBM=y -CONFIG_IBM_EMAC=y -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DETECT_HUNG_TASK=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_CRYPTO=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023rds_defconfig index 3ff5a81c709f..c091aaf7685f 100644 --- a/arch/powerpc/configs/85xx/p1023rds_defconfig +++ b/arch/powerpc/configs/85xx/p1023rds_defconfig @@ -24,7 +24,7 @@ CONFIG_P1023_RDS=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_CPM2=y -CONFIG_MPC8xxx_GPIO=y +CONFIG_GPIO_MPC8XXX=y CONFIG_HIGHMEM=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig index 5ea3124518fd..1cd6fcb368e9 100644 --- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig +++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig @@ -20,7 +20,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set CONFIG_XES_MPC85xx=y -CONFIG_MPC8xxx_GPIO=y +CONFIG_GPIO_MPC8XXX=y CONFIG_HIGHMEM=y CONFIG_MATH_EMULATION=y CONFIG_SPARSE_IRQ=y diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index 4311d02a3bfd..f087de6ec03f 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -12,9 +12,7 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y CONFIG_SLAB=y @@ -23,8 +21,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_P2040_RDB=y +CONFIG_P2041_RDB=y CONFIG_P3041_DS=y +CONFIG_P3060_QDS=y CONFIG_P4080_DS=y CONFIG_P5020_DS=y CONFIG_HIGHMEM=y @@ -69,7 +68,6 @@ CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -107,7 +105,6 @@ CONFIG_FSL_PQ_MDIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_SERIO_LIBPS2=y # CONFIG_LEGACY_PTYS is not set -CONFIG_PPC_EPAPR_HV_BYTECHAN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_EXTENDED=y @@ -136,8 +133,6 @@ CONFIG_USB_OHCI_HCD_PPC_OF_LE=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_OF=y -CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y @@ -146,7 +141,6 @@ CONFIG_RTC_DRV_DS3232=y CONFIG_RTC_DRV_CMOS=y CONFIG_UIO=y CONFIG_STAGING=y -# CONFIG_STAGING_EXCLUDE_BUILD is not set CONFIG_VIRT_DRIVERS=y CONFIG_FSL_HV_MANAGER=y CONFIG_EXT2_FS=y @@ -173,7 +167,6 @@ CONFIG_MAC_PARTITION=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=m CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index c92c204a204b..782822c32d15 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -11,10 +11,8 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y @@ -25,7 +23,6 @@ CONFIG_P5020_DS=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m -# CONFIG_PCI is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -93,10 +90,8 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_VIRQ_DEBUG=y CONFIG_CRYPTO_PCBC=m diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig index 6cb588a7d425..0d36b0e1e268 100644 --- a/arch/powerpc/configs/mgcoge_defconfig +++ b/arch/powerpc/configs/mgcoge_defconfig @@ -1,15 +1,22 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y CONFIG_SPARSE_IRQ=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y +# CONFIG_RD_GZIP is not set CONFIG_KALLSYMS_ALL=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_EMBEDDED=y CONFIG_SLAB=y # CONFIG_IOSCHED_CFQ is not set +# CONFIG_PPC_PMAC is not set CONFIG_PPC_82xx=y CONFIG_MGCOGE=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=y # CONFIG_SECCOMP is not set CONFIG_NET=y @@ -24,11 +31,10 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_NETFILTER=y +CONFIG_TIPC=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLKDEVS=y @@ -42,7 +48,6 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y -# CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y CONFIG_FIXED_PHY=y CONFIG_NET_ETHERNET=y @@ -50,6 +55,7 @@ CONFIG_FS_ENET=y CONFIG_FS_ENET_MDIO_FCC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set @@ -57,24 +63,24 @@ CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y -# CONFIG_I2C_POWERMAC is not set CONFIG_I2C_CPM=y # CONFIG_HWMON is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB_GADGET=y +CONFIG_USB_FSL_USB2=y +CONFIG_USB_G_SERIAL=y +CONFIG_UIO=y +CONFIG_UIO_PDRV=y CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -# CONFIG_EXT3_FS_XATTR is not set CONFIG_AUTOFS4_FS=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y +CONFIG_SQUASHFS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_PARTITION_ADVANCED=y -# CONFIG_MAC_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y @@ -82,7 +88,6 @@ CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set CONFIG_DEBUG_INFO=y CONFIG_SYSCTL_SYSCALL_CHECK=y diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig index c02bbb2fddf8..211fcc9ed700 100644 --- a/arch/powerpc/configs/mpc512x_defconfig +++ b/arch/powerpc/configs/mpc512x_defconfig @@ -1,9 +1,9 @@ CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_SPARSE_IRQ=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y CONFIG_MODULES=y @@ -13,10 +13,11 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_PPC_CHRP is not set CONFIG_PPC_MPC512x=y CONFIG_MPC5121_ADS=y +CONFIG_MPC5121_GENERIC=y +CONFIG_PDM360NG=y # CONFIG_PPC_PMAC is not set CONFIG_NO_HZ=y CONFIG_HZ_1000=y -CONFIG_SPARSE_IRQ=y # CONFIG_MIGRATION is not set # CONFIG_SECCOMP is not set # CONFIG_PCI is not set @@ -35,18 +36,16 @@ CONFIG_CAN=y CONFIG_CAN_RAW=y CONFIG_CAN_BCM=y CONFIG_CAN_VCAN=y -CONFIG_CAN_DEV=y CONFIG_CAN_MSCAN=y CONFIG_CAN_DEBUG_DEVICES=y # CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y @@ -63,6 +62,7 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_XIP=y CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=y CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y @@ -99,10 +99,14 @@ CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y +CONFIG_SPI=y +CONFIG_SPI_MPC512x_PSC=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_MPC8XXX=y # CONFIG_HWMON is not set CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y -# CONFIG_VIDEO_ALLOW_V4L1 is not set CONFIG_VIDEO_ADV_DEBUG=y # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set CONFIG_VIDEO_SAA711X=y @@ -132,6 +136,5 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index e63f537b854a..2a1320fb2723 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -88,6 +88,18 @@ CONFIG_FB_RADEON=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_PCI is not set +# CONFIG_SND_PPC is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_MPC5200_I2S=y +CONFIG_SND_MPC52xx_SOC_PCM030=y +CONFIG_SND_MPC52xx_SOC_EFIKA=y CONFIG_HID_DRAGONRISE=y CONFIG_HID_GYRATION=y CONFIG_HID_TWINHAN=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index a3467bfb7671..a1e5a178a4ac 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -10,10 +10,8 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y @@ -41,7 +39,6 @@ CONFIG_TQM8560=y CONFIG_SBC8548=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y -CONFIG_MPC8xxx_GPIO=y CONFIG_HIGHMEM=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -123,6 +120,7 @@ CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CPM=m CONFIG_I2C_MPC=y +CONFIG_GPIO_MPC8XXX=y # CONFIG_HWMON is not set CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y @@ -206,7 +204,6 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y CONFIG_SYSCTL_SYSCALL_CHECK=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 9693f6ed3da0..dd1e41386c4c 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -12,10 +12,8 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y @@ -42,7 +40,6 @@ CONFIG_TQM8560=y CONFIG_SBC8548=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y -CONFIG_MPC8xxx_GPIO=y CONFIG_HIGHMEM=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -124,6 +121,7 @@ CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CPM=m CONFIG_I2C_MPC=y +CONFIG_GPIO_MPC8XXX=y # CONFIG_HWMON is not set CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y @@ -207,10 +205,8 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_VIRQ_DEBUG=y CONFIG_CRYPTO_PCBC=m diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig index 7cb703b948b1..1eb19ac45d09 100644 --- a/arch/powerpc/configs/ppc40x_defconfig +++ b/arch/powerpc/configs/ppc40x_defconfig @@ -14,7 +14,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_PPC4xx_GPIO=y CONFIG_ACADIA=y CONFIG_EP405=y -CONFIG_HCU4=y CONFIG_HOTFOOT=y CONFIG_KILAUEA=y CONFIG_MAKALU=y diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index 04360f9b0109..c47f2becfbc3 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -70,7 +70,7 @@ CONFIG_TAU_AVERAGE=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_PPC_BESTCOMM=y -CONFIG_MPC8xxx_GPIO=y +CONFIG_GPIO_MPC8XXX=y CONFIG_MCU_MPC8349EMITX=m CONFIG_HIGHMEM=y CONFIG_NO_HZ=y diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h index 16d25c0974be..d57c08acedfc 100644 --- a/arch/powerpc/include/asm/device.h +++ b/arch/powerpc/include/asm/device.h @@ -37,4 +37,6 @@ struct pdev_archdata { u64 dma_mask; }; +#define ARCH_HAS_DMA_GET_REQUIRED_MASK + #endif /* _ASM_POWERPC_DEVICE_H */ diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h index 3a6c586c4e40..14db29b18d0e 100644 --- a/arch/powerpc/include/asm/firmware.h +++ b/arch/powerpc/include/asm/firmware.h @@ -48,6 +48,8 @@ #define FW_FEATURE_CMO ASM_CONST(0x0000000002000000) #define FW_FEATURE_VPHN ASM_CONST(0x0000000004000000) #define FW_FEATURE_XCMO ASM_CONST(0x0000000008000000) +#define FW_FEATURE_OPAL ASM_CONST(0x0000000010000000) +#define FW_FEATURE_OPALv2 ASM_CONST(0x0000000020000000) #ifndef __ASSEMBLY__ @@ -65,6 +67,8 @@ enum { FW_FEATURE_PSERIES_ALWAYS = 0, FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, + FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2, + FW_FEATURE_POWERNV_ALWAYS = 0, FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, FW_FEATURE_CELLEB_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_BEAT, @@ -78,6 +82,9 @@ enum { #ifdef CONFIG_PPC_ISERIES FW_FEATURE_ISERIES_POSSIBLE | #endif +#ifdef CONFIG_PPC_POWERNV + FW_FEATURE_POWERNV_POSSIBLE | +#endif #ifdef CONFIG_PPC_PS3 FW_FEATURE_PS3_POSSIBLE | #endif @@ -95,6 +102,9 @@ enum { #ifdef CONFIG_PPC_ISERIES FW_FEATURE_ISERIES_ALWAYS & #endif +#ifdef CONFIG_PPC_POWERNV + FW_FEATURE_POWERNV_ALWAYS & +#endif #ifdef CONFIG_PPC_PS3 FW_FEATURE_PS3_ALWAYS & #endif diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h index 5856a66ab404..86004930a78e 100644 --- a/arch/powerpc/include/asm/hugetlb.h +++ b/arch/powerpc/include/asm/hugetlb.h @@ -1,15 +1,60 @@ #ifndef _ASM_POWERPC_HUGETLB_H #define _ASM_POWERPC_HUGETLB_H +#ifdef CONFIG_HUGETLB_PAGE #include <asm/page.h> +extern struct kmem_cache *hugepte_cache; +extern void __init reserve_hugetlb_gpages(void); + +static inline pte_t *hugepd_page(hugepd_t hpd) +{ + BUG_ON(!hugepd_ok(hpd)); + return (pte_t *)((hpd.pd & ~HUGEPD_SHIFT_MASK) | PD_HUGE); +} + +static inline unsigned int hugepd_shift(hugepd_t hpd) +{ + return hpd.pd & HUGEPD_SHIFT_MASK; +} + +static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr, + unsigned pdshift) +{ + /* + * On 32-bit, we have multiple higher-level table entries that point to + * the same hugepte. Just use the first one since they're all + * identical. So for that case, idx=0. + */ + unsigned long idx = 0; + + pte_t *dir = hugepd_page(*hpdp); +#ifdef CONFIG_PPC64 + idx = (addr & ((1UL << pdshift) - 1)) >> hugepd_shift(*hpdp); +#endif + + return dir + idx; +} + pte_t *huge_pte_offset_and_shift(struct mm_struct *mm, unsigned long addr, unsigned *shift); void flush_dcache_icache_hugepage(struct page *page); +#if defined(CONFIG_PPC_MM_SLICES) || defined(CONFIG_PPC_SUBPAGE_PROT) int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr, unsigned long len); +#else +static inline int is_hugepage_only_range(struct mm_struct *mm, + unsigned long addr, + unsigned long len) +{ + return 0; +} +#endif + +void book3e_hugetlb_preload(struct mm_struct *mm, unsigned long ea, pte_t pte); +void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr); void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr, unsigned long end, unsigned long floor, @@ -50,8 +95,11 @@ static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { - unsigned long old = pte_update(mm, addr, ptep, ~0UL, 1); - return __pte(old); +#ifdef CONFIG_PPC64 + return __pte(pte_update(mm, addr, ptep, ~0UL, 1)); +#else + return __pte(pte_update(ptep, ~0UL, 0)); +#endif } static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, @@ -93,4 +141,15 @@ static inline void arch_release_hugepage(struct page *page) { } +#else /* ! CONFIG_HUGETLB_PAGE */ +static inline void reserve_hugetlb_gpages(void) +{ + pr_err("Cannot reserve gpages without hugetlb enabled\n"); +} +static inline void flush_hugetlb_page(struct vm_area_struct *vma, + unsigned long vmaddr) +{ +} +#endif + #endif /* _ASM_POWERPC_HUGETLB_H */ diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h index 8a33698c61bd..f921eb121d39 100644 --- a/arch/powerpc/include/asm/kexec.h +++ b/arch/powerpc/include/asm/kexec.h @@ -2,7 +2,7 @@ #define _ASM_POWERPC_KEXEC_H #ifdef __KERNEL__ -#ifdef CONFIG_FSL_BOOKE +#if defined(CONFIG_FSL_BOOKE) || defined(CONFIG_44x) /* * On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index 47cacddb14cf..58fc21623014 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -85,8 +85,9 @@ struct machdep_calls { void (*pci_dma_dev_setup)(struct pci_dev *dev); void (*pci_dma_bus_setup)(struct pci_bus *bus); - /* Platform set_dma_mask override */ + /* Platform set_dma_mask and dma_get_required_mask overrides */ int (*dma_set_mask)(struct device *dev, u64 dma_mask); + u64 (*dma_get_required_mask)(struct device *dev); int (*probe)(void); void (*setup_arch)(void); /* Optional, may be NULL */ diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h index 3ea0f9a259d8..0260ea5ec3c2 100644 --- a/arch/powerpc/include/asm/mmu-book3e.h +++ b/arch/powerpc/include/asm/mmu-book3e.h @@ -66,6 +66,7 @@ #define MAS2_M 0x00000004 #define MAS2_G 0x00000002 #define MAS2_E 0x00000001 +#define MAS2_WIMGE_MASK 0x0000001f #define MAS2_EPN_MASK(size) (~0 << (size + 10)) #define MAS2_VAL(addr, size, flags) ((addr) & MAS2_EPN_MASK(size) | (flags)) @@ -80,6 +81,7 @@ #define MAS3_SW 0x00000004 #define MAS3_UR 0x00000002 #define MAS3_SR 0x00000001 +#define MAS3_BAP_MASK 0x0000003f #define MAS3_SPSIZE 0x0000003e #define MAS3_SPSIZE_SHIFT 1 @@ -212,6 +214,11 @@ typedef struct { unsigned int id; unsigned int active; unsigned long vdso_base; +#ifdef CONFIG_PPC_MM_SLICES + u64 low_slices_psize; /* SLB page size encodings */ + u64 high_slices_psize; /* 4 bits per slice for now */ + u16 user_psize; /* page size index */ +#endif } mm_context_t; /* Page size definitions, common between 32 and 64-bit diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h index b445e0af4c2b..db645ec842bd 100644 --- a/arch/powerpc/include/asm/mmu-hash64.h +++ b/arch/powerpc/include/asm/mmu-hash64.h @@ -262,8 +262,7 @@ extern void hash_failure_debug(unsigned long ea, unsigned long access, extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend, unsigned long pstart, unsigned long prot, int psize, int ssize); -extern void add_gpage(unsigned long addr, unsigned long page_size, - unsigned long number_of_pages); +extern void add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages); extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr); extern void hpte_init_native(void); diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 698b30638681..f0145522cfba 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -175,14 +175,16 @@ extern u64 ppc64_rma_size; #define MMU_PAGE_64K_AP 3 /* "Admixed pages" (hash64 only) */ #define MMU_PAGE_256K 4 #define MMU_PAGE_1M 5 -#define MMU_PAGE_8M 6 -#define MMU_PAGE_16M 7 -#define MMU_PAGE_256M 8 -#define MMU_PAGE_1G 9 -#define MMU_PAGE_16G 10 -#define MMU_PAGE_64G 11 -#define MMU_PAGE_COUNT 12 - +#define MMU_PAGE_4M 6 +#define MMU_PAGE_8M 7 +#define MMU_PAGE_16M 8 +#define MMU_PAGE_64M 9 +#define MMU_PAGE_256M 10 +#define MMU_PAGE_1G 11 +#define MMU_PAGE_16G 12 +#define MMU_PAGE_64G 13 + +#define MMU_PAGE_COUNT 14 #if defined(CONFIG_PPC_STD_MMU_64) /* 64-bit classic hash table MMU */ diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h index df18989e78d4..e6fae49e0b74 100644 --- a/arch/powerpc/include/asm/mpic.h +++ b/arch/powerpc/include/asm/mpic.h @@ -273,8 +273,6 @@ struct mpic unsigned int irq_count; /* Number of sources */ unsigned int num_sources; - /* Number of CPUs */ - unsigned int num_cpus; /* default senses array */ unsigned char *senses; unsigned int senses_count; diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h new file mode 100644 index 000000000000..2893e8f5406d --- /dev/null +++ b/arch/powerpc/include/asm/opal.h @@ -0,0 +1,443 @@ +/* + * PowerNV OPAL definitions. + * + * Copyright 2011 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __OPAL_H +#define __OPAL_H + +/****** Takeover interface ********/ + +/* PAPR H-Call used to querty the HAL existence and/or instanciate + * it from within pHyp (tech preview only). + * + * This is exclusively used in prom_init.c + */ + +#ifndef __ASSEMBLY__ + +struct opal_takeover_args { + u64 k_image; /* r4 */ + u64 k_size; /* r5 */ + u64 k_entry; /* r6 */ + u64 k_entry2; /* r7 */ + u64 hal_addr; /* r8 */ + u64 rd_image; /* r9 */ + u64 rd_size; /* r10 */ + u64 rd_loc; /* r11 */ +}; + +extern long opal_query_takeover(u64 *hal_size, u64 *hal_align); + +extern long opal_do_takeover(struct opal_takeover_args *args); + +struct rtas_args; +extern int opal_enter_rtas(struct rtas_args *args, + unsigned long data, + unsigned long entry); + +#endif /* __ASSEMBLY__ */ + +/****** OPAL APIs ******/ + +/* Return codes */ +#define OPAL_SUCCESS 0 +#define OPAL_PARAMETER -1 +#define OPAL_BUSY -2 +#define OPAL_PARTIAL -3 +#define OPAL_CONSTRAINED -4 +#define OPAL_CLOSED -5 +#define OPAL_HARDWARE -6 +#define OPAL_UNSUPPORTED -7 +#define OPAL_PERMISSION -8 +#define OPAL_NO_MEM -9 +#define OPAL_RESOURCE -10 +#define OPAL_INTERNAL_ERROR -11 +#define OPAL_BUSY_EVENT -12 +#define OPAL_HARDWARE_FROZEN -13 + +/* API Tokens (in r0) */ +#define OPAL_CONSOLE_WRITE 1 +#define OPAL_CONSOLE_READ 2 +#define OPAL_RTC_READ 3 +#define OPAL_RTC_WRITE 4 +#define OPAL_CEC_POWER_DOWN 5 +#define OPAL_CEC_REBOOT 6 +#define OPAL_READ_NVRAM 7 +#define OPAL_WRITE_NVRAM 8 +#define OPAL_HANDLE_INTERRUPT 9 +#define OPAL_POLL_EVENTS 10 +#define OPAL_PCI_SET_HUB_TCE_MEMORY 11 +#define OPAL_PCI_SET_PHB_TCE_MEMORY 12 +#define OPAL_PCI_CONFIG_READ_BYTE 13 +#define OPAL_PCI_CONFIG_READ_HALF_WORD 14 +#define OPAL_PCI_CONFIG_READ_WORD 15 +#define OPAL_PCI_CONFIG_WRITE_BYTE 16 +#define OPAL_PCI_CONFIG_WRITE_HALF_WORD 17 +#define OPAL_PCI_CONFIG_WRITE_WORD 18 +#define OPAL_SET_XIVE 19 +#define OPAL_GET_XIVE 20 +#define OPAL_GET_COMPLETION_TOKEN_STATUS 21 /* obsolete */ +#define OPAL_REGISTER_OPAL_EXCEPTION_HANDLER 22 +#define OPAL_PCI_EEH_FREEZE_STATUS 23 +#define OPAL_PCI_SHPC 24 +#define OPAL_CONSOLE_WRITE_BUFFER_SPACE 25 +#define OPAL_PCI_EEH_FREEZE_CLEAR 26 +#define OPAL_PCI_PHB_MMIO_ENABLE 27 +#define OPAL_PCI_SET_PHB_MEM_WINDOW 28 +#define OPAL_PCI_MAP_PE_MMIO_WINDOW 29 +#define OPAL_PCI_SET_PHB_TABLE_MEMORY 30 +#define OPAL_PCI_SET_PE 31 +#define OPAL_PCI_SET_PELTV 32 +#define OPAL_PCI_SET_MVE 33 +#define OPAL_PCI_SET_MVE_ENABLE 34 +#define OPAL_PCI_GET_XIVE_REISSUE 35 +#define OPAL_PCI_SET_XIVE_REISSUE 36 +#define OPAL_PCI_SET_XIVE_PE 37 +#define OPAL_GET_XIVE_SOURCE 38 +#define OPAL_GET_MSI_32 39 +#define OPAL_GET_MSI_64 40 +#define OPAL_START_CPU 41 +#define OPAL_QUERY_CPU_STATUS 42 +#define OPAL_WRITE_OPPANEL 43 +#define OPAL_PCI_MAP_PE_DMA_WINDOW 44 +#define OPAL_PCI_MAP_PE_DMA_WINDOW_REAL 45 +#define OPAL_PCI_RESET 49 + +#ifndef __ASSEMBLY__ + +/* Other enums */ +enum OpalVendorApiTokens { + OPAL_START_VENDOR_API_RANGE = 1000, OPAL_END_VENDOR_API_RANGE = 1999 +}; +enum OpalFreezeState { + OPAL_EEH_STOPPED_NOT_FROZEN = 0, + OPAL_EEH_STOPPED_MMIO_FREEZE = 1, + OPAL_EEH_STOPPED_DMA_FREEZE = 2, + OPAL_EEH_STOPPED_MMIO_DMA_FREEZE = 3, + OPAL_EEH_STOPPED_RESET = 4, + OPAL_EEH_STOPPED_TEMP_UNAVAIL = 5, + OPAL_EEH_STOPPED_PERM_UNAVAIL = 6 +}; +enum OpalEehFreezeActionToken { + OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO = 1, + OPAL_EEH_ACTION_CLEAR_FREEZE_DMA = 2, + OPAL_EEH_ACTION_CLEAR_FREEZE_ALL = 3 +}; +enum OpalPciStatusToken { + OPAL_EEH_PHB_NO_ERROR = 0, + OPAL_EEH_PHB_FATAL = 1, + OPAL_EEH_PHB_RECOVERABLE = 2, + OPAL_EEH_PHB_BUS_ERROR = 3, + OPAL_EEH_PCI_NO_DEVSEL = 4, + OPAL_EEH_PCI_TA = 5, + OPAL_EEH_PCIEX_UR = 6, + OPAL_EEH_PCIEX_CA = 7, + OPAL_EEH_PCI_MMIO_ERROR = 8, + OPAL_EEH_PCI_DMA_ERROR = 9 +}; +enum OpalShpcAction { + OPAL_SHPC_GET_LINK_STATE = 0, + OPAL_SHPC_GET_SLOT_STATE = 1 +}; +enum OpalShpcLinkState { + OPAL_SHPC_LINK_DOWN = 0, + OPAL_SHPC_LINK_UP = 1 +}; +enum OpalMmioWindowType { + OPAL_M32_WINDOW_TYPE = 1, + OPAL_M64_WINDOW_TYPE = 2, + OPAL_IO_WINDOW_TYPE = 3 +}; +enum OpalShpcSlotState { + OPAL_SHPC_DEV_NOT_PRESENT = 0, + OPAL_SHPC_DEV_PRESENT = 1 +}; +enum OpalExceptionHandler { + OPAL_MACHINE_CHECK_HANDLER = 1, + OPAL_HYPERVISOR_MAINTENANCE_HANDLER = 2, + OPAL_SOFTPATCH_HANDLER = 3 +}; +enum OpalPendingState { + OPAL_EVENT_OPAL_INTERNAL = 0x1, + OPAL_EVENT_NVRAM = 0x2, + OPAL_EVENT_RTC = 0x4, + OPAL_EVENT_CONSOLE_OUTPUT = 0x8, + OPAL_EVENT_CONSOLE_INPUT = 0x10 +}; + +/* Machine check related definitions */ +enum OpalMCE_Version { + OpalMCE_V1 = 1, +}; + +enum OpalMCE_Severity { + OpalMCE_SEV_NO_ERROR = 0, + OpalMCE_SEV_WARNING = 1, + OpalMCE_SEV_ERROR_SYNC = 2, + OpalMCE_SEV_FATAL = 3, +}; + +enum OpalMCE_Disposition { + OpalMCE_DISPOSITION_RECOVERED = 0, + OpalMCE_DISPOSITION_NOT_RECOVERED = 1, +}; + +enum OpalMCE_Initiator { + OpalMCE_INITIATOR_UNKNOWN = 0, + OpalMCE_INITIATOR_CPU = 1, +}; + +enum OpalMCE_ErrorType { + OpalMCE_ERROR_TYPE_UNKNOWN = 0, + OpalMCE_ERROR_TYPE_UE = 1, + OpalMCE_ERROR_TYPE_SLB = 2, + OpalMCE_ERROR_TYPE_ERAT = 3, + OpalMCE_ERROR_TYPE_TLB = 4, +}; + +enum OpalMCE_UeErrorType { + OpalMCE_UE_ERROR_INDETERMINATE = 0, + OpalMCE_UE_ERROR_IFETCH = 1, + OpalMCE_UE_ERROR_PAGE_TABLE_WALK_IFETCH = 2, + OpalMCE_UE_ERROR_LOAD_STORE = 3, + OpalMCE_UE_ERROR_PAGE_TABLE_WALK_LOAD_STORE = 4, +}; + +enum OpalMCE_SlbErrorType { + OpalMCE_SLB_ERROR_INDETERMINATE = 0, + OpalMCE_SLB_ERROR_PARITY = 1, + OpalMCE_SLB_ERROR_MULTIHIT = 2, +}; + +enum OpalMCE_EratErrorType { + OpalMCE_ERAT_ERROR_INDETERMINATE = 0, + OpalMCE_ERAT_ERROR_PARITY = 1, + OpalMCE_ERAT_ERROR_MULTIHIT = 2, +}; + +enum OpalMCE_TlbErrorType { + OpalMCE_TLB_ERROR_INDETERMINATE = 0, + OpalMCE_TLB_ERROR_PARITY = 1, + OpalMCE_TLB_ERROR_MULTIHIT = 2, +}; + +enum OpalThreadStatus { + OPAL_THREAD_INACTIVE = 0x0, + OPAL_THREAD_STARTED = 0x1 +}; + +enum OpalPciBusCompare { + OpalPciBusAny = 0, /* Any bus number match */ + OpalPciBus3Bits = 2, /* Match top 3 bits of bus number */ + OpalPciBus4Bits = 3, /* Match top 4 bits of bus number */ + OpalPciBus5Bits = 4, /* Match top 5 bits of bus number */ + OpalPciBus6Bits = 5, /* Match top 6 bits of bus number */ + OpalPciBus7Bits = 6, /* Match top 7 bits of bus number */ + OpalPciBusAll = 7, /* Match bus number exactly */ +}; + +enum OpalDeviceCompare { + OPAL_IGNORE_RID_DEVICE_NUMBER = 0, + OPAL_COMPARE_RID_DEVICE_NUMBER = 1 +}; + +enum OpalFuncCompare { + OPAL_IGNORE_RID_FUNCTION_NUMBER = 0, + OPAL_COMPARE_RID_FUNCTION_NUMBER = 1 +}; + +enum OpalPeAction { + OPAL_UNMAP_PE = 0, + OPAL_MAP_PE = 1 +}; + +enum OpalPciResetAndReinitScope { + OPAL_PHB_COMPLETE = 1, OPAL_PCI_LINK = 2, OPAL_PHB_ERROR = 3, + OPAL_PCI_HOT_RESET = 4, OPAL_PCI_FUNDAMENTAL_RESET = 5, + OPAL_PCI_IODA_RESET = 6, +}; + +enum OpalPciResetState { OPAL_DEASSERT_RESET = 0, OPAL_ASSERT_RESET = 1 }; + +struct opal_machine_check_event { + enum OpalMCE_Version version:8; /* 0x00 */ + uint8_t in_use; /* 0x01 */ + enum OpalMCE_Severity severity:8; /* 0x02 */ + enum OpalMCE_Initiator initiator:8; /* 0x03 */ + enum OpalMCE_ErrorType error_type:8; /* 0x04 */ + enum OpalMCE_Disposition disposition:8; /* 0x05 */ + uint8_t reserved_1[2]; /* 0x06 */ + uint64_t gpr3; /* 0x08 */ + uint64_t srr0; /* 0x10 */ + uint64_t srr1; /* 0x18 */ + union { /* 0x20 */ + struct { + enum OpalMCE_UeErrorType ue_error_type:8; + uint8_t effective_address_provided; + uint8_t physical_address_provided; + uint8_t reserved_1[5]; + uint64_t effective_address; + uint64_t physical_address; + uint8_t reserved_2[8]; + } ue_error; + + struct { + enum OpalMCE_SlbErrorType slb_error_type:8; + uint8_t effective_address_provided; + uint8_t reserved_1[6]; + uint64_t effective_address; + uint8_t reserved_2[16]; + } slb_error; + + struct { + enum OpalMCE_EratErrorType erat_error_type:8; + uint8_t effective_address_provided; + uint8_t reserved_1[6]; + uint64_t effective_address; + uint8_t reserved_2[16]; + } erat_error; + + struct { + enum OpalMCE_TlbErrorType tlb_error_type:8; + uint8_t effective_address_provided; + uint8_t reserved_1[6]; + uint64_t effective_address; + uint8_t reserved_2[16]; + } tlb_error; + } u; +}; + +typedef struct oppanel_line { + /* XXX */ +} oppanel_line_t; + +/* API functions */ +int64_t opal_console_write(int64_t term_number, int64_t *length, + const uint8_t *buffer); +int64_t opal_console_read(int64_t term_number, int64_t *length, + uint8_t *buffer); +int64_t opal_console_write_buffer_space(int64_t term_number, + int64_t *length); +int64_t opal_rtc_read(uint32_t *year_month_day, + uint64_t *hour_minute_second_millisecond); +int64_t opal_rtc_write(uint32_t year_month_day, + uint64_t hour_minute_second_millisecond); +int64_t opal_cec_power_down(uint64_t request); +int64_t opal_cec_reboot(void); +int64_t opal_read_nvram(uint64_t buffer, uint64_t size, uint64_t offset); +int64_t opal_write_nvram(uint64_t buffer, uint64_t size, uint64_t offset); +int64_t opal_handle_interrupt(uint64_t isn, uint64_t *outstanding_event_mask); +int64_t opal_poll_events(uint64_t *outstanding_event_mask); +int64_t opal_pci_set_hub_tce_memory(uint64_t hub_id, uint64_t tce_mem_addr, + uint64_t tce_mem_size); +int64_t opal_pci_set_phb_tce_memory(uint64_t phb_id, uint64_t tce_mem_addr, + uint64_t tce_mem_size); +int64_t opal_pci_config_read_byte(uint64_t phb_id, uint64_t bus_dev_func, + uint64_t offset, uint8_t *data); +int64_t opal_pci_config_read_half_word(uint64_t phb_id, uint64_t bus_dev_func, + uint64_t offset, uint16_t *data); +int64_t opal_pci_config_read_word(uint64_t phb_id, uint64_t bus_dev_func, + uint64_t offset, uint32_t *data); +int64_t opal_pci_config_write_byte(uint64_t phb_id, uint64_t bus_dev_func, + uint64_t offset, uint8_t data); +int64_t opal_pci_config_write_half_word(uint64_t phb_id, uint64_t bus_dev_func, + uint64_t offset, uint16_t data); +int64_t opal_pci_config_write_word(uint64_t phb_id, uint64_t bus_dev_func, + uint64_t offset, uint32_t data); +int64_t opal_set_xive(uint32_t isn, uint16_t server, uint8_t priority); +int64_t opal_get_xive(uint32_t isn, uint16_t *server, uint8_t *priority); +int64_t opal_register_exception_handler(uint64_t opal_exception, + uint64_t handler_address, + uint64_t glue_cache_line); +int64_t opal_pci_eeh_freeze_status(uint64_t phb_id, uint64_t pe_number, + uint8_t *freeze_state, + uint16_t *pci_error_type, + uint64_t *phb_status); +int64_t opal_pci_eeh_freeze_clear(uint64_t phb_id, uint64_t pe_number, + uint64_t eeh_action_token); +int64_t opal_pci_shpc(uint64_t phb_id, uint64_t shpc_action, uint8_t *state); + + + +int64_t opal_pci_phb_mmio_enable(uint64_t phb_id, uint16_t window_type, + uint16_t window_num, uint16_t enable); +int64_t opal_pci_set_phb_mem_window(uint64_t phb_id, uint16_t window_type, + uint16_t window_num, + uint64_t starting_real_address, + uint64_t starting_pci_address, + uint16_t segment_size); +int64_t opal_pci_map_pe_mmio_window(uint64_t phb_id, uint16_t pe_number, + uint16_t window_type, uint16_t window_num, + uint16_t segment_num); +int64_t opal_pci_set_phb_table_memory(uint64_t phb_id, uint64_t rtt_addr, + uint64_t ivt_addr, uint64_t ivt_len, + uint64_t reject_array_addr, + uint64_t peltv_addr); +int64_t opal_pci_set_pe(uint64_t phb_id, uint64_t pe_number, uint64_t bus_dev_func, + uint8_t bus_compare, uint8_t dev_compare, uint8_t func_compare, + uint8_t pe_action); +int64_t opal_pci_set_peltv(uint64_t phb_id, uint32_t parent_pe, uint32_t child_pe, + uint8_t state); +int64_t opal_pci_set_mve(uint64_t phb_id, uint32_t mve_number, uint32_t pe_number); +int64_t opal_pci_set_mve_enable(uint64_t phb_id, uint32_t mve_number, + uint32_t state); +int64_t opal_pci_get_xive_reissue(uint64_t phb_id, uint32_t xive_number, + uint8_t *p_bit, uint8_t *q_bit); +int64_t opal_pci_set_xive_reissue(uint64_t phb_id, uint32_t xive_number, + uint8_t p_bit, uint8_t q_bit); +int64_t opal_pci_set_xive_pe(uint64_t phb_id, uint32_t pe_number, + uint32_t xive_num); +int64_t opal_get_xive_source(uint64_t phb_id, uint32_t xive_num, + int32_t *interrupt_source_number); +int64_t opal_get_msi_32(uint64_t phb_id, uint32_t mve_number, uint32_t xive_num, + uint8_t msi_range, uint32_t *msi_address, + uint32_t *message_data); +int64_t opal_get_msi_64(uint64_t phb_id, uint32_t mve_number, + uint32_t xive_num, uint8_t msi_range, + uint64_t *msi_address, uint32_t *message_data); +int64_t opal_start_cpu(uint64_t thread_number, uint64_t start_address); +int64_t opal_query_cpu_status(uint64_t thread_number, uint8_t *thread_status); +int64_t opal_write_oppanel(oppanel_line_t *lines, uint64_t num_lines); +int64_t opal_pci_map_pe_dma_window(uint64_t phb_id, uint16_t pe_number, uint16_t window_id, + uint16_t tce_levels, uint64_t tce_table_addr, + uint64_t tce_table_size, uint64_t tce_page_size); +int64_t opal_pci_map_pe_dma_window_real(uint64_t phb_id, uint16_t pe_number, + uint16_t dma_window_number, uint64_t pci_start_addr, + uint64_t pci_mem_size); +int64_t opal_pci_reset(uint64_t phb_id, uint8_t reset_scope, uint8_t assert_state); + +/* Internal functions */ +extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data); + +extern int opal_get_chars(uint32_t vtermno, char *buf, int count); +extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len); + +extern void hvc_opal_init_early(void); + +/* Internal functions */ +extern int early_init_dt_scan_opal(unsigned long node, const char *uname, + int depth, void *data); + +extern int opal_get_chars(uint32_t vtermno, char *buf, int count); +extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len); + +extern void hvc_opal_init_early(void); + +struct rtc_time; +extern int opal_set_rtc_time(struct rtc_time *tm); +extern void opal_get_rtc_time(struct rtc_time *tm); +extern unsigned long opal_get_boot_time(void); +extern void opal_nvram_init(void); + +extern int opal_machine_check(struct pt_regs *regs); + +#endif /* __ASSEMBLY__ */ + +#endif /* __OPAL_H */ diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index 516bfb3f47d9..17722c73ba2e 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -43,6 +43,7 @@ extern unsigned int debug_smp_processor_id(void); /* from linux/smp.h */ #define get_slb_shadow() (get_paca()->slb_shadow_ptr) struct task_struct; +struct opal_machine_check_event; /* * Defines the layout of the paca. @@ -135,6 +136,13 @@ struct paca_struct { u8 io_sync; /* writel() needs spin_unlock sync */ u8 irq_work_pending; /* IRQ_WORK interrupt while soft-disable */ +#ifdef CONFIG_PPC_POWERNV + /* Pointer to OPAL machine check event structure set by the + * early exception handler for use by high level C handler + */ + struct opal_machine_check_event *opal_mc_evt; +#endif + /* Stuff for accurate time accounting */ u64 user_time; /* accumulated usermode TB ticks */ u64 system_time; /* accumulated system TB ticks */ diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h index 2cd664ef0a5e..dd9c4fd038e0 100644 --- a/arch/powerpc/include/asm/page.h +++ b/arch/powerpc/include/asm/page.h @@ -36,6 +36,18 @@ #define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) +#ifndef __ASSEMBLY__ +#ifdef CONFIG_HUGETLB_PAGE +extern unsigned int HPAGE_SHIFT; +#else +#define HPAGE_SHIFT PAGE_SHIFT +#endif +#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) +#define HPAGE_MASK (~(HPAGE_SIZE - 1)) +#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) +#define HUGE_MAX_HSTATE (MMU_PAGE_COUNT-1) +#endif + /* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */ #define __HAVE_ARCH_GATE_AREA 1 @@ -158,6 +170,24 @@ extern phys_addr_t kernstart_addr; #define is_kernel_addr(x) ((x) >= PAGE_OFFSET) #endif +/* + * Use the top bit of the higher-level page table entries to indicate whether + * the entries we point to contain hugepages. This works because we know that + * the page tables live in kernel space. If we ever decide to support having + * page tables at arbitrary addresses, this breaks and will have to change. + */ +#ifdef CONFIG_PPC64 +#define PD_HUGE 0x8000000000000000 +#else +#define PD_HUGE 0x80000000 +#endif + +/* + * Some number of bits at the level of the page table that points to + * a hugepte are used to encode the size. This masks those bits. + */ +#define HUGEPD_SHIFT_MASK 0x3f + #ifndef __ASSEMBLY__ #undef STRICT_MM_TYPECHECKS @@ -243,7 +273,6 @@ typedef unsigned long pgprot_t; #endif typedef struct { signed long pd; } hugepd_t; -#define HUGEPD_SHIFT_MASK 0x3f #ifdef CONFIG_HUGETLB_PAGE static inline int hugepd_ok(hugepd_t hpd) diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h index 9356262fd3cc..fb40ede6bc0d 100644 --- a/arch/powerpc/include/asm/page_64.h +++ b/arch/powerpc/include/asm/page_64.h @@ -64,17 +64,6 @@ extern void copy_page(void *to, void *from); /* Log 2 of page table size */ extern u64 ppc64_pft_size; -/* Large pages size */ -#ifdef CONFIG_HUGETLB_PAGE -extern unsigned int HPAGE_SHIFT; -#else -#define HPAGE_SHIFT PAGE_SHIFT -#endif -#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) -#define HPAGE_MASK (~(HPAGE_SIZE - 1)) -#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) -#define HUGE_MAX_HSTATE (MMU_PAGE_COUNT-1) - #endif /* __ASSEMBLY__ */ #ifdef CONFIG_PPC_MM_SLICES diff --git a/arch/powerpc/include/asm/pte-book3e.h b/arch/powerpc/include/asm/pte-book3e.h index 082d515930a2..0156702ba24e 100644 --- a/arch/powerpc/include/asm/pte-book3e.h +++ b/arch/powerpc/include/asm/pte-book3e.h @@ -72,6 +72,9 @@ #define PTE_RPN_SHIFT (24) #endif +#define PTE_WIMGE_SHIFT (19) +#define PTE_BAP_SHIFT (2) + /* On 32-bit, we never clear the top part of the PTE */ #ifdef CONFIG_PPC32 #define _PTE_NONE_MASK 0xffffffff00000000ULL diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 9ec0b39f9ddc..28cdbd9f399c 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -548,6 +548,9 @@ #define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */ #define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */ +/* Bit definitions for L1CSR2. */ +#define L1CSR2_DCWS 0x40000000 /* Data Cache write shadow */ + /* Bit definitions for L2CSR0. */ #define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */ #define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */ diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h index 58625d1e7802..41f69ae79d4e 100644 --- a/arch/powerpc/include/asm/rtas.h +++ b/arch/powerpc/include/asm/rtas.h @@ -249,10 +249,12 @@ extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal); #define ERR_FLAG_ALREADY_LOGGED 0x0 #define ERR_FLAG_BOOT 0x1 /* log was pulled from NVRAM on boot */ #define ERR_TYPE_RTAS_LOG 0x2 /* from rtas event-scan */ -#define ERR_TYPE_KERNEL_PANIC 0x4 /* from panic() */ +#define ERR_TYPE_KERNEL_PANIC 0x4 /* from die()/panic() */ +#define ERR_TYPE_KERNEL_PANIC_GZ 0x8 /* ditto, compressed */ /* All the types and not flags */ -#define ERR_TYPE_MASK (ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC) +#define ERR_TYPE_MASK \ + (ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC | ERR_TYPE_KERNEL_PANIC_GZ) #define RTAS_DEBUG KERN_DEBUG "RTAS: " diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h index 15a70b7f638b..adba970ce918 100644 --- a/arch/powerpc/include/asm/smp.h +++ b/arch/powerpc/include/asm/smp.h @@ -65,6 +65,7 @@ int generic_cpu_disable(void); void generic_cpu_die(unsigned int cpu); void generic_mach_cpu_die(void); void generic_set_cpu_dead(unsigned int cpu); +int generic_check_cpu_restart(unsigned int cpu); #endif #ifdef CONFIG_PPC64 diff --git a/arch/powerpc/include/asm/sparsemem.h b/arch/powerpc/include/asm/sparsemem.h index 54a47ea2c3aa..0c5fa3145615 100644 --- a/arch/powerpc/include/asm/sparsemem.h +++ b/arch/powerpc/include/asm/sparsemem.h @@ -16,7 +16,7 @@ #endif /* CONFIG_SPARSEMEM */ #ifdef CONFIG_MEMORY_HOTPLUG -extern void create_section_mapping(unsigned long start, unsigned long end); +extern int create_section_mapping(unsigned long start, unsigned long end); extern int remove_section_mapping(unsigned long start, unsigned long end); #ifdef CONFIG_NUMA extern int hot_add_scn_to_nid(unsigned long scn_addr); diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h index 7ef0d90defc8..1e104af08483 100644 --- a/arch/powerpc/include/asm/topology.h +++ b/arch/powerpc/include/asm/topology.h @@ -19,14 +19,10 @@ struct device_node; #define RECLAIM_DISTANCE 10 /* - * Before going off node we want the VM to try and reclaim from the local - * node. It does this if the remote distance is larger than RECLAIM_DISTANCE. - * With the default REMOTE_DISTANCE of 20 and the default RECLAIM_DISTANCE of - * 20, we never reclaim and go off node straight away. - * - * To fix this we choose a smaller value of RECLAIM_DISTANCE. + * Avoid creating an extra level of balancing (SD_ALLNODES) on the largest + * POWER7 boxes which have a maximum of 32 nodes. */ -#define RECLAIM_DISTANCE 10 +#define SD_NODES_PER_DOMAIN 32 #include <asm/mmzone.h> @@ -69,11 +65,11 @@ static inline int pcibus_to_node(struct pci_bus *bus) .forkexec_idx = 0, \ \ .flags = 1*SD_LOAD_BALANCE \ - | 1*SD_BALANCE_NEWIDLE \ + | 0*SD_BALANCE_NEWIDLE \ | 1*SD_BALANCE_EXEC \ | 1*SD_BALANCE_FORK \ | 0*SD_BALANCE_WAKE \ - | 0*SD_WAKE_AFFINE \ + | 1*SD_WAKE_AFFINE \ | 0*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ | 0*SD_POWERSAVINGS_BALANCE \ diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h index 5354ae91bdde..8338aef5a4d3 100644 --- a/arch/powerpc/include/asm/udbg.h +++ b/arch/powerpc/include/asm/udbg.h @@ -55,6 +55,9 @@ extern void __init udbg_init_cpm(void); extern void __init udbg_init_usbgecko(void); extern void __init udbg_init_wsp(void); extern void __init udbg_init_ehv_bc(void); +extern void __init udbg_init_ps3gelic(void); +extern void __init udbg_init_debug_opal_raw(void); +extern void __init udbg_init_debug_opal_hvsi(void); #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_UDBG_H */ diff --git a/arch/powerpc/include/asm/xics.h b/arch/powerpc/include/asm/xics.h index b183a4062011..bd6c401c0ee5 100644 --- a/arch/powerpc/include/asm/xics.h +++ b/arch/powerpc/include/asm/xics.h @@ -27,10 +27,18 @@ #define MAX_NUM_PRIORITIES 3 /* Native ICP */ +#ifdef CONFIG_PPC_ICP_NATIVE extern int icp_native_init(void); +#else +static inline int icp_native_init(void) { return -ENODEV; } +#endif /* PAPR ICP */ +#ifdef CONFIG_PPC_ICP_HV extern int icp_hv_init(void); +#else +static inline int icp_hv_init(void) { return -ENODEV; } +#endif /* ICP ops */ struct icp_ops { @@ -51,7 +59,18 @@ extern const struct icp_ops *icp_ops; extern int ics_native_init(void); /* RTAS ICS */ +#ifdef CONFIG_PPC_ICS_RTAS extern int ics_rtas_init(void); +#else +static inline int ics_rtas_init(void) { return -ENODEV; } +#endif + +/* HAL ICS */ +#ifdef CONFIG_PPC_POWERNV +extern int ics_opal_init(void); +#else +static inline int ics_opal_init(void) { return -ENODEV; } +#endif /* ICS instance, hooked up to chip_data of an irq */ struct ics { diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 69f7ffe7f674..7c5324f1ec9c 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -49,6 +49,9 @@ #ifdef CONFIG_PPC_ISERIES #include <asm/iseries/alpaca.h> #endif +#ifdef CONFIG_PPC_POWERNV +#include <asm/opal.h> +#endif #if defined(CONFIG_KVM) || defined(CONFIG_KVM_GUEST) #include <linux/kvm_host.h> #endif @@ -610,5 +613,12 @@ int main(void) arch.timing_last_enter.tv32.tbl)); #endif +#ifdef CONFIG_PPC_POWERNV + DEFINE(OPAL_MC_GPR3, offsetof(struct opal_machine_check_event, gpr3)); + DEFINE(OPAL_MC_SRR0, offsetof(struct opal_machine_check_event, srr0)); + DEFINE(OPAL_MC_SRR1, offsetof(struct opal_machine_check_event, srr1)); + DEFINE(PACA_OPAL_MC_EVT, offsetof(struct paca_struct, opal_mc_evt)); +#endif + return 0; } diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c index e7554154a6de..6f04b9c383a7 100644 --- a/arch/powerpc/kernel/dma-iommu.c +++ b/arch/powerpc/kernel/dma-iommu.c @@ -90,13 +90,27 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask) return 1; } +static u64 dma_iommu_get_required_mask(struct device *dev) +{ + struct iommu_table *tbl = get_iommu_table_base(dev); + u64 mask; + if (!tbl) + return 0; + + mask = 1ULL < (fls_long(tbl->it_offset + tbl->it_size) - 1); + mask += mask - 1; + + return mask; +} + struct dma_map_ops dma_iommu_ops = { - .alloc_coherent = dma_iommu_alloc_coherent, - .free_coherent = dma_iommu_free_coherent, - .map_sg = dma_iommu_map_sg, - .unmap_sg = dma_iommu_unmap_sg, - .dma_supported = dma_iommu_dma_supported, - .map_page = dma_iommu_map_page, - .unmap_page = dma_iommu_unmap_page, + .alloc_coherent = dma_iommu_alloc_coherent, + .free_coherent = dma_iommu_free_coherent, + .map_sg = dma_iommu_map_sg, + .unmap_sg = dma_iommu_unmap_sg, + .dma_supported = dma_iommu_dma_supported, + .map_page = dma_iommu_map_page, + .unmap_page = dma_iommu_unmap_page, + .get_required_mask = dma_iommu_get_required_mask, }; EXPORT_SYMBOL(dma_iommu_ops); diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c index 4295e0b94b2d..1ebc9189aada 100644 --- a/arch/powerpc/kernel/dma-swiotlb.c +++ b/arch/powerpc/kernel/dma-swiotlb.c @@ -24,6 +24,21 @@ unsigned int ppc_swiotlb_enable; +static u64 swiotlb_powerpc_get_required(struct device *dev) +{ + u64 end, mask, max_direct_dma_addr = dev->archdata.max_direct_dma_addr; + + end = memblock_end_of_DRAM(); + if (max_direct_dma_addr && end > max_direct_dma_addr) + end = max_direct_dma_addr; + end += get_dma_offset(dev); + + mask = 1ULL << (fls64(end) - 1); + mask += mask - 1; + + return mask; +} + /* * At the moment, all platforms that use this code only require * swiotlb to be used if we're operating on HIGHMEM. Since @@ -44,6 +59,7 @@ struct dma_map_ops swiotlb_dma_ops = { .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, .sync_sg_for_device = swiotlb_sync_sg_for_device, .mapping_error = swiotlb_dma_mapping_error, + .get_required_mask = swiotlb_powerpc_get_required, }; void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev) diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index 4f0959fbfbee..8593f53c4f6c 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -96,6 +96,18 @@ static int dma_direct_dma_supported(struct device *dev, u64 mask) #endif } +static u64 dma_direct_get_required_mask(struct device *dev) +{ + u64 end, mask; + + end = memblock_end_of_DRAM() + get_dma_offset(dev); + + mask = 1ULL << (fls64(end) - 1); + mask += mask - 1; + + return mask; +} + static inline dma_addr_t dma_direct_map_page(struct device *dev, struct page *page, unsigned long offset, @@ -137,13 +149,14 @@ static inline void dma_direct_sync_single(struct device *dev, #endif struct dma_map_ops dma_direct_ops = { - .alloc_coherent = dma_direct_alloc_coherent, - .free_coherent = dma_direct_free_coherent, - .map_sg = dma_direct_map_sg, - .unmap_sg = dma_direct_unmap_sg, - .dma_supported = dma_direct_dma_supported, - .map_page = dma_direct_map_page, - .unmap_page = dma_direct_unmap_page, + .alloc_coherent = dma_direct_alloc_coherent, + .free_coherent = dma_direct_free_coherent, + .map_sg = dma_direct_map_sg, + .unmap_sg = dma_direct_unmap_sg, + .dma_supported = dma_direct_dma_supported, + .map_page = dma_direct_map_page, + .unmap_page = dma_direct_unmap_page, + .get_required_mask = dma_direct_get_required_mask, #ifdef CONFIG_NOT_COHERENT_CACHE .sync_single_for_cpu = dma_direct_sync_single, .sync_single_for_device = dma_direct_sync_single, @@ -170,6 +183,23 @@ int dma_set_mask(struct device *dev, u64 dma_mask) } EXPORT_SYMBOL(dma_set_mask); +u64 dma_get_required_mask(struct device *dev) +{ + struct dma_map_ops *dma_ops = get_dma_ops(dev); + + if (ppc_md.dma_get_required_mask) + return ppc_md.dma_get_required_mask(dev); + + if (unlikely(dma_ops == NULL)) + return 0; + + if (dma_ops->get_required_mask) + return dma_ops->get_required_mask(dev); + + return DMA_BIT_MASK(8 * sizeof(dma_addr_t)); +} +EXPORT_SYMBOL_GPL(dma_get_required_mask); + static int __init dma_init(void) { dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 29ddd8b1c274..a54d92fec612 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -1133,7 +1133,7 @@ _GLOBAL(do_stab_bolted) rfid b . /* prevent speculative execution */ -#ifdef CONFIG_PPC_PSERIES +#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) /* * Data area reserved for FWNMI option. * This address (0x7000) is fixed by the RPA. @@ -1141,7 +1141,7 @@ _GLOBAL(do_stab_bolted) .= 0x7000 .globl fwnmi_data_area fwnmi_data_area: -#endif /* CONFIG_PPC_PSERIES */ +#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */ /* iSeries does not use the FWNMI stuff, so it is safe to put * this here, even if we later allow kernels that will boot on @@ -1166,9 +1166,12 @@ xLparMap: #endif /* CONFIG_PPC_ISERIES */ -#ifdef CONFIG_PPC_PSERIES +#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) + /* pseries and powernv need to keep the whole page from + * 0x7000 to 0x8000 free for use by the firmware + */ . = 0x8000 -#endif /* CONFIG_PPC_PSERIES */ +#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */ /* * Space for CPU0's segment table. @@ -1183,3 +1186,19 @@ xLparMap: .globl initial_stab initial_stab: .space 4096 +#ifdef CONFIG_PPC_POWERNV +_GLOBAL(opal_mc_secondary_handler) + HMT_MEDIUM + SET_SCRATCH0(r13) + GET_PACA(r13) + clrldi r3,r3,2 + tovirt(r3,r3) + std r3,PACA_OPAL_MC_EVT(r13) + ld r13,OPAL_MC_SRR0(r3) + mtspr SPRN_SRR0,r13 + ld r13,OPAL_MC_SRR1(r3) + mtspr SPRN_SRR1,r13 + ld r3,OPAL_MC_GPR3(r3) + GET_SCRATCH0(r13) + b machine_check_pSeries +#endif /* CONFIG_PPC_POWERNV */ diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index ba250d505e07..0654dba2c1f1 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -139,8 +139,7 @@ __start: trap #endif /* CONFIG_PPC_PMAC */ -1: mr r31,r3 /* save parameters */ - mr r30,r4 +1: mr r31,r3 /* save device tree ptr */ li r24,0 /* cpu # */ /* @@ -964,8 +963,8 @@ start_here: * Do early platform-specific initialization, * and set up the MMU. */ - mr r3,r31 - mr r4,r30 + li r3,0 + mr r4,r31 bl machine_init bl __save_cpu_setup bl MMU_init diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S index a91626d87fc9..872a6af83bad 100644 --- a/arch/powerpc/kernel/head_40x.S +++ b/arch/powerpc/kernel/head_40x.S @@ -58,13 +58,7 @@ _ENTRY(_stext); _ENTRY(_start); - /* Save parameters we are passed. - */ - mr r31,r3 - mr r30,r4 - mr r29,r5 - mr r28,r6 - mr r27,r7 + mr r31,r3 /* save device tree ptr */ /* We have to turn on the MMU right away so we get cache modes * set correctly. @@ -849,11 +843,8 @@ start_here: /* * Decide what sort of machine this is and initialize the MMU. */ - mr r3,r31 - mr r4,r30 - mr r5,r29 - mr r6,r28 - mr r7,r27 + li r3,0 + mr r4,r31 bl machine_init bl MMU_init diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index f8e971ba94f5..b725dab0f88a 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -61,14 +61,7 @@ _ENTRY(_start); * of abatron_pteptrs */ nop -/* - * Save parameters we are passed - */ - mr r31,r3 - mr r30,r4 - mr r29,r5 - mr r28,r6 - mr r27,r7 + mr r31,r3 /* save device tree ptr */ li r24,0 /* CPU number */ bl init_cpu_state @@ -120,11 +113,8 @@ _ENTRY(_start); /* * Decide what sort of machine this is and initialize the MMU. */ - mr r3,r31 - mr r4,r30 - mr r5,r29 - mr r6,r28 - mr r7,r27 + li r3,0 + mr r4,r31 bl machine_init bl MMU_init diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 3564c49c683e..06c7251c1bf7 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -51,6 +51,11 @@ * For pSeries or server processors: * 1. The MMU is off & open firmware is running in real mode. * 2. The kernel is entered at __start + * -or- For OPAL entry: + * 1. The MMU is off, processor in HV mode, primary CPU enters at 0 + * with device-tree in gpr3. We also get OPAL base in r8 and + * entry in r9 for debugging purposes + * 2. Secondary processors enter at 0x60 with PIR in gpr3 * * For iSeries: * 1. The MMU is on (as it always is for iSeries) @@ -331,6 +336,11 @@ _GLOBAL(__start_initialization_multiplatform) /* Save parameters */ mr r31,r3 mr r30,r4 +#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL + /* Save OPAL entry */ + mr r28,r8 + mr r29,r9 +#endif #ifdef CONFIG_PPC_BOOK3E bl .start_initialization_book3e @@ -674,9 +684,9 @@ _GLOBAL(enable_64b_mode) _GLOBAL(relative_toc) mflr r0 bcl 20,31,$+4 -0: mflr r9 - ld r2,(p_toc - 0b)(r9) - add r2,r2,r9 +0: mflr r11 + ld r2,(p_toc - 0b)(r11) + add r2,r2,r11 mtlr r0 blr @@ -707,6 +717,12 @@ _INIT_STATIC(start_here_multiplatform) bdnz 3b 4: +#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL + /* Setup OPAL entry */ + std r28,0(r11); + std r29,8(r11); +#endif + #ifndef CONFIG_PPC_BOOK3E mfmsr r6 ori r6,r6,MSR_RI diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index 1cbf64e6b416..b68cb173ba2c 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -76,11 +76,7 @@ _ENTRY(_start); */ .globl __start __start: - mr r31,r3 /* save parameters */ - mr r30,r4 - mr r29,r5 - mr r28,r6 - mr r27,r7 + mr r31,r3 /* save device tree ptr */ /* We have to turn on the MMU right away so we get cache modes * set correctly. @@ -723,11 +719,8 @@ start_here: /* * Decide what sort of machine this is and initialize the MMU. */ - mr r3,r31 - mr r4,r30 - mr r5,r29 - mr r6,r28 - mr r7,r27 + li r3,0 + mr r4,r31 bl machine_init bl MMU_init diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 50845924b7d9..9f5d210ddf3f 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -63,17 +63,30 @@ _ENTRY(_start); * of abatron_pteptrs */ nop -/* - * Save parameters we are passed - */ - mr r31,r3 - mr r30,r4 - mr r29,r5 - mr r28,r6 - mr r27,r7 - li r25,0 /* phys kernel start (low) */ - li r24,0 /* CPU number */ - li r23,0 /* phys kernel start (high) */ + + /* Translate device tree address to physical, save in r30/r31 */ + mfmsr r16 + mfspr r17,SPRN_PID + rlwinm r17,r17,16,0x3fff0000 /* turn PID into MAS6[SPID] */ + rlwimi r17,r16,28,0x00000001 /* turn MSR[DS] into MAS6[SAS] */ + mtspr SPRN_MAS6,r17 + + tlbsx 0,r3 /* must succeed */ + + mfspr r16,SPRN_MAS1 + mfspr r20,SPRN_MAS3 + rlwinm r17,r16,25,0x1f /* r17 = log2(page size) */ + li r18,1024 + slw r18,r18,r17 /* r18 = page size */ + addi r18,r18,-1 + and r19,r3,r18 /* r19 = page offset */ + andc r31,r20,r18 /* r31 = page base */ + or r31,r31,r19 /* r31 = devtree phys addr */ + mfspr r30,SPRN_MAS7 + + li r25,0 /* phys kernel start (low) */ + li r24,0 /* CPU number */ + li r23,0 /* phys kernel start (high) */ /* We try to not make any assumptions about how the boot loader * setup or used the TLBs. We invalidate all mappings from the @@ -198,11 +211,8 @@ _ENTRY(__early_start) /* * Decide what sort of machine this is and initialize the MMU. */ - mr r3,r31 - mr r4,r30 - mr r5,r29 - mr r6,r28 - mr r7,r27 + mr r3,r30 + mr r4,r31 bl machine_init bl MMU_init @@ -236,8 +246,24 @@ _ENTRY(__early_start) * if we find the pte (fall through): * r11 is low pte word * r12 is pointer to the pte + * r10 is the pshift from the PGD, if we're a hugepage */ #ifdef CONFIG_PTE_64BIT +#ifdef CONFIG_HUGETLB_PAGE +#define FIND_PTE \ + rlwinm r12, r10, 13, 19, 29; /* Compute pgdir/pmd offset */ \ + lwzx r11, r12, r11; /* Get pgd/pmd entry */ \ + rlwinm. r12, r11, 0, 0, 20; /* Extract pt base address */ \ + blt 1000f; /* Normal non-huge page */ \ + beq 2f; /* Bail if no table */ \ + oris r11, r11, PD_HUGE@h; /* Put back address bit */ \ + andi. r10, r11, HUGEPD_SHIFT_MASK@l; /* extract size field */ \ + xor r12, r10, r11; /* drop size bits from pointer */ \ + b 1001f; \ +1000: rlwimi r12, r10, 23, 20, 28; /* Compute pte address */ \ + li r10, 0; /* clear r10 */ \ +1001: lwz r11, 4(r12); /* Get pte entry */ +#else #define FIND_PTE \ rlwinm r12, r10, 13, 19, 29; /* Compute pgdir/pmd offset */ \ lwzx r11, r12, r11; /* Get pgd/pmd entry */ \ @@ -245,7 +271,8 @@ _ENTRY(__early_start) beq 2f; /* Bail if no table */ \ rlwimi r12, r10, 23, 20, 28; /* Compute pte address */ \ lwz r11, 4(r12); /* Get pte entry */ -#else +#endif /* HUGEPAGE */ +#else /* !PTE_64BIT */ #define FIND_PTE \ rlwimi r11, r10, 12, 20, 29; /* Create L1 (pgdir/pmd) address */ \ lwz r11, 0(r11); /* Get L1 entry */ \ @@ -402,8 +429,8 @@ interrupt_base: #ifdef CONFIG_PTE_64BIT #ifdef CONFIG_SMP - subf r10,r11,r12 /* create false data dep */ - lwzx r13,r11,r10 /* Get upper pte bits */ + subf r13,r11,r12 /* create false data dep */ + lwzx r13,r11,r13 /* Get upper pte bits */ #else lwz r13,0(r12) /* Get upper pte bits */ #endif @@ -483,8 +510,8 @@ interrupt_base: #ifdef CONFIG_PTE_64BIT #ifdef CONFIG_SMP - subf r10,r11,r12 /* create false data dep */ - lwzx r13,r11,r10 /* Get upper pte bits */ + subf r13,r11,r12 /* create false data dep */ + lwzx r13,r11,r13 /* Get upper pte bits */ #else lwz r13,0(r12) /* Get upper pte bits */ #endif @@ -548,7 +575,7 @@ interrupt_base: /* * Both the instruction and data TLB miss get to this * point to load the TLB. - * r10 - available to use + * r10 - tsize encoding (if HUGETLB_PAGE) or available to use * r11 - TLB (info from Linux PTE) * r12 - available to use * r13 - upper bits of PTE (if PTE_64BIT) or available to use @@ -558,21 +585,73 @@ interrupt_base: * Upon exit, we reload everything and RFI. */ finish_tlb_load: +#ifdef CONFIG_HUGETLB_PAGE + cmpwi 6, r10, 0 /* check for huge page */ + beq 6, finish_tlb_load_cont /* !huge */ + + /* Alas, we need more scratch registers for hugepages */ + mfspr r12, SPRN_SPRG_THREAD + stw r14, THREAD_NORMSAVE(4)(r12) + stw r15, THREAD_NORMSAVE(5)(r12) + stw r16, THREAD_NORMSAVE(6)(r12) + stw r17, THREAD_NORMSAVE(7)(r12) + + /* Get the next_tlbcam_idx percpu var */ +#ifdef CONFIG_SMP + lwz r12, THREAD_INFO-THREAD(r12) + lwz r15, TI_CPU(r12) + lis r14, __per_cpu_offset@h + ori r14, r14, __per_cpu_offset@l + rlwinm r15, r15, 2, 0, 29 + lwzx r16, r14, r15 +#else + li r16, 0 +#endif + lis r17, next_tlbcam_idx@h + ori r17, r17, next_tlbcam_idx@l + add r17, r17, r16 /* r17 = *next_tlbcam_idx */ + lwz r15, 0(r17) /* r15 = next_tlbcam_idx */ + + lis r14, MAS0_TLBSEL(1)@h /* select TLB1 (TLBCAM) */ + rlwimi r14, r15, 16, 4, 15 /* next_tlbcam_idx entry */ + mtspr SPRN_MAS0, r14 + + /* Extract TLB1CFG(NENTRY) */ + mfspr r16, SPRN_TLB1CFG + andi. r16, r16, 0xfff + + /* Update next_tlbcam_idx, wrapping when necessary */ + addi r15, r15, 1 + cmpw r15, r16 + blt 100f + lis r14, tlbcam_index@h + ori r14, r14, tlbcam_index@l + lwz r15, 0(r14) +100: stw r15, 0(r17) + + /* + * Calc MAS1_TSIZE from r10 (which has pshift encoded) + * tlb_enc = (pshift - 10). + */ + subi r15, r10, 10 + mfspr r16, SPRN_MAS1 + rlwimi r16, r15, 7, 20, 24 + mtspr SPRN_MAS1, r16 + + /* copy the pshift for use later */ + mr r14, r10 + + /* fall through */ + +#endif /* CONFIG_HUGETLB_PAGE */ + /* * We set execute, because we don't have the granularity to * properly set this at the page level (Linux problem). * Many of these bits are software only. Bits we don't set * here we (properly should) assume have the appropriate value. */ - - mfspr r12, SPRN_MAS2 -#ifdef CONFIG_PTE_64BIT - rlwimi r12, r11, 32-19, 27, 31 /* extract WIMGE from pte */ -#else - rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */ -#endif - mtspr SPRN_MAS2, r12 - +finish_tlb_load_cont: #ifdef CONFIG_PTE_64BIT rlwinm r12, r11, 32-2, 26, 31 /* Move in perm bits */ andi. r10, r11, _PAGE_DIRTY @@ -581,22 +660,40 @@ finish_tlb_load: andc r12, r12, r10 1: rlwimi r12, r13, 20, 0, 11 /* grab RPN[32:43] */ rlwimi r12, r11, 20, 12, 19 /* grab RPN[44:51] */ - mtspr SPRN_MAS3, r12 +2: mtspr SPRN_MAS3, r12 BEGIN_MMU_FTR_SECTION srwi r10, r13, 12 /* grab RPN[12:31] */ mtspr SPRN_MAS7, r10 END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS) #else li r10, (_PAGE_EXEC | _PAGE_PRESENT) + mr r13, r11 rlwimi r10, r11, 31, 29, 29 /* extract _PAGE_DIRTY into SW */ and r12, r11, r10 andi. r10, r11, _PAGE_USER /* Test for _PAGE_USER */ slwi r10, r12, 1 or r10, r10, r12 iseleq r12, r12, r10 - rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */ - mtspr SPRN_MAS3, r11 + rlwimi r13, r12, 0, 20, 31 /* Get RPN from PTE, merge w/ perms */ + mtspr SPRN_MAS3, r13 #endif + + mfspr r12, SPRN_MAS2 +#ifdef CONFIG_PTE_64BIT + rlwimi r12, r11, 32-19, 27, 31 /* extract WIMGE from pte */ +#else + rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */ +#endif +#ifdef CONFIG_HUGETLB_PAGE + beq 6, 3f /* don't mask if page isn't huge */ + li r13, 1 + slw r13, r13, r14 + subi r13, r13, 1 + rlwinm r13, r13, 0, 0, 19 /* bottom bits used for WIMGE/etc */ + andc r12, r12, r13 /* mask off ea bits within the page */ +#endif +3: mtspr SPRN_MAS2, r12 + #ifdef CONFIG_E200 /* Round robin TLB1 entries assignment */ mfspr r12, SPRN_MAS0 @@ -622,11 +719,19 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS) mtspr SPRN_MAS0,r12 #endif /* CONFIG_E200 */ +tlb_write_entry: tlbwe /* Done...restore registers and get out of here. */ mfspr r10, SPRN_SPRG_THREAD - lwz r11, THREAD_NORMSAVE(3)(r10) +#ifdef CONFIG_HUGETLB_PAGE + beq 6, 8f /* skip restore for 4k page faults */ + lwz r14, THREAD_NORMSAVE(4)(r10) + lwz r15, THREAD_NORMSAVE(5)(r10) + lwz r16, THREAD_NORMSAVE(6)(r10) + lwz r17, THREAD_NORMSAVE(7)(r10) +#endif +8: lwz r11, THREAD_NORMSAVE(3)(r10) mtcr r11 lwz r13, THREAD_NORMSAVE(2)(r10) lwz r12, THREAD_NORMSAVE(1)(r10) diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index 28581f1ad2c0..73110fb6bb6c 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -125,17 +125,23 @@ static void ibmebus_unmap_sg(struct device *dev, static int ibmebus_dma_supported(struct device *dev, u64 mask) { - return 1; + return mask == DMA_BIT_MASK(64); +} + +static u64 ibmebus_dma_get_required_mask(struct device *dev) +{ + return DMA_BIT_MASK(64); } static struct dma_map_ops ibmebus_dma_ops = { - .alloc_coherent = ibmebus_alloc_coherent, - .free_coherent = ibmebus_free_coherent, - .map_sg = ibmebus_map_sg, - .unmap_sg = ibmebus_unmap_sg, - .dma_supported = ibmebus_dma_supported, - .map_page = ibmebus_map_page, - .unmap_page = ibmebus_unmap_page, + .alloc_coherent = ibmebus_alloc_coherent, + .free_coherent = ibmebus_free_coherent, + .map_sg = ibmebus_map_sg, + .unmap_sg = ibmebus_unmap_sg, + .dma_supported = ibmebus_dma_supported, + .get_required_mask = ibmebus_dma_get_required_mask, + .map_page = ibmebus_map_page, + .unmap_page = ibmebus_unmap_page, }; static int ibmebus_match_path(struct device *dev, void *data) diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S index 3e2b95c6ae67..4f0ab85f3788 100644 --- a/arch/powerpc/kernel/idle_e500.S +++ b/arch/powerpc/kernel/idle_e500.S @@ -26,7 +26,7 @@ _GLOBAL(e500_idle) ori r4,r4,_TLF_NAPPING /* so when we take an exception */ stw r4,TI_LOCAL_FLAGS(r3) /* it will return to our caller */ -#ifdef CONFIG_E500MC +#ifdef CONFIG_PPC_E500MC wrteei 1 1: wait diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index 961bb03413f3..0cfcf98aafca 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -501,6 +501,14 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid) tbl->it_map = page_address(page); memset(tbl->it_map, 0, sz); + /* + * Reserve page 0 so it will not be used for any mappings. + * This avoids buggy drivers that consider page 0 to be invalid + * to crash the machine or even lose data. + */ + if (tbl->it_offset == 0) + set_bit(0, tbl->it_map); + tbl->it_hint = 0; tbl->it_largehint = tbl->it_halfpoint; spin_lock_init(&tbl->it_lock); diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 2b97b80d6d7d..c7b5afeecaf2 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -6,6 +6,7 @@ #include <linux/pci.h> #include <linux/of_address.h> #include <linux/of_device.h> +#include <linux/serial_reg.h> #include <asm/io.h> #include <asm/mmu.h> #include <asm/prom.h> @@ -47,6 +48,24 @@ static struct __initdata of_device_id legacy_serial_parents[] = { static unsigned int legacy_serial_count; static int legacy_serial_console = -1; +static unsigned int tsi_serial_in(struct uart_port *p, int offset) +{ + unsigned int tmp; + offset = offset << p->regshift; + if (offset == UART_IIR) { + tmp = readl(p->membase + (UART_IIR & ~3)); + return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ + } else + return readb(p->membase + offset); +} + +static void tsi_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + if (!((offset == UART_IER) && (value & UART_IER_UUE))) + writeb(value, p->membase + offset); +} + static int __init add_legacy_port(struct device_node *np, int want_index, int iotype, phys_addr_t base, phys_addr_t taddr, unsigned long irq, @@ -102,6 +121,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index, legacy_serial_ports[index].iobase = base; else legacy_serial_ports[index].mapbase = base; + legacy_serial_ports[index].iotype = iotype; legacy_serial_ports[index].uartclk = clock; legacy_serial_ports[index].irq = irq; @@ -112,6 +132,11 @@ static int __init add_legacy_port(struct device_node *np, int want_index, legacy_serial_infos[index].speed = spd ? be32_to_cpup(spd) : 0; legacy_serial_infos[index].irq_check_parent = irq_check_parent; + if (iotype == UPIO_TSI) { + legacy_serial_ports[index].serial_in = tsi_serial_in; + legacy_serial_ports[index].serial_out = tsi_serial_out; + } + printk(KERN_DEBUG "Found legacy serial port %d for %s\n", index, np->full_name); printk(KERN_DEBUG " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n", diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index 583af70c4b14..26ccbf77dd41 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -74,8 +74,7 @@ int default_machine_kexec_prepare(struct kimage *image) } /* We also should not overwrite the tce tables */ - for (node = of_find_node_by_type(NULL, "pci"); node != NULL; - node = of_find_node_by_type(node, "pci")) { + for_each_node_by_type(node, "pci") { basep = of_get_property(node, "linux,tce-base", NULL); sizep = of_get_property(node, "linux,tce-size", NULL); if (basep == NULL || sizep == NULL) diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 998a10028608..f7d760ab5ca1 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -8,6 +8,8 @@ * kexec bits: * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com> * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz + * PPC44x port. Copyright (C) 2011, IBM Corporation + * Author: Suzuki Poulose <suzuki@in.ibm.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -736,6 +738,175 @@ relocate_new_kernel: mr r5, r31 li r0, 0 +#elif defined(CONFIG_44x) && !defined(CONFIG_47x) + +/* + * Code for setting up 1:1 mapping for PPC440x for KEXEC + * + * We cannot switch off the MMU on PPC44x. + * So we: + * 1) Invalidate all the mappings except the one we are running from. + * 2) Create a tmp mapping for our code in the other address space(TS) and + * jump to it. Invalidate the entry we started in. + * 3) Create a 1:1 mapping for 0-2GiB in chunks of 256M in original TS. + * 4) Jump to the 1:1 mapping in original TS. + * 5) Invalidate the tmp mapping. + * + * - Based on the kexec support code for FSL BookE + * - Doesn't support 47x yet. + * + */ + /* Save our parameters */ + mr r29, r3 + mr r30, r4 + mr r31, r5 + + /* Load our MSR_IS and TID to MMUCR for TLB search */ + mfspr r3,SPRN_PID + mfmsr r4 + andi. r4,r4,MSR_IS@l + beq wmmucr + oris r3,r3,PPC44x_MMUCR_STS@h +wmmucr: + mtspr SPRN_MMUCR,r3 + sync + + /* + * Invalidate all the TLB entries except the current entry + * where we are running from + */ + bl 0f /* Find our address */ +0: mflr r5 /* Make it accessible */ + tlbsx r23,0,r5 /* Find entry we are in */ + li r4,0 /* Start at TLB entry 0 */ + li r3,0 /* Set PAGEID inval value */ +1: cmpw r23,r4 /* Is this our entry? */ + beq skip /* If so, skip the inval */ + tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */ +skip: + addi r4,r4,1 /* Increment */ + cmpwi r4,64 /* Are we done? */ + bne 1b /* If not, repeat */ + isync + + /* Create a temp mapping and jump to it */ + andi. r6, r23, 1 /* Find the index to use */ + addi r24, r6, 1 /* r24 will contain 1 or 2 */ + + mfmsr r9 /* get the MSR */ + rlwinm r5, r9, 27, 31, 31 /* Extract the MSR[IS] */ + xori r7, r5, 1 /* Use the other address space */ + + /* Read the current mapping entries */ + tlbre r3, r23, PPC44x_TLB_PAGEID + tlbre r4, r23, PPC44x_TLB_XLAT + tlbre r5, r23, PPC44x_TLB_ATTRIB + + /* Save our current XLAT entry */ + mr r25, r4 + + /* Extract the TLB PageSize */ + li r10, 1 /* r10 will hold PageSize */ + rlwinm r11, r3, 0, 24, 27 /* bits 24-27 */ + + /* XXX: As of now we use 256M, 4K pages */ + cmpwi r11, PPC44x_TLB_256M + bne tlb_4k + rotlwi r10, r10, 28 /* r10 = 256M */ + b write_out +tlb_4k: + cmpwi r11, PPC44x_TLB_4K + bne default + rotlwi r10, r10, 12 /* r10 = 4K */ + b write_out +default: + rotlwi r10, r10, 10 /* r10 = 1K */ + +write_out: + /* + * Write out the tmp 1:1 mapping for this code in other address space + * Fixup EPN = RPN , TS=other address space + */ + insrwi r3, r7, 1, 23 /* Bit 23 is TS for PAGEID field */ + + /* Write out the tmp mapping entries */ + tlbwe r3, r24, PPC44x_TLB_PAGEID + tlbwe r4, r24, PPC44x_TLB_XLAT + tlbwe r5, r24, PPC44x_TLB_ATTRIB + + subi r11, r10, 1 /* PageOffset Mask = PageSize - 1 */ + not r10, r11 /* Mask for PageNum */ + + /* Switch to other address space in MSR */ + insrwi r9, r7, 1, 26 /* Set MSR[IS] = r7 */ + + bl 1f +1: mflr r8 + addi r8, r8, (2f-1b) /* Find the target offset */ + + /* Jump to the tmp mapping */ + mtspr SPRN_SRR0, r8 + mtspr SPRN_SRR1, r9 + rfi + +2: + /* Invalidate the entry we were executing from */ + li r3, 0 + tlbwe r3, r23, PPC44x_TLB_PAGEID + + /* attribute fields. rwx for SUPERVISOR mode */ + li r5, 0 + ori r5, r5, (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G) + + /* Create 1:1 mapping in 256M pages */ + xori r7, r7, 1 /* Revert back to Original TS */ + + li r8, 0 /* PageNumber */ + li r6, 3 /* TLB Index, start at 3 */ + +next_tlb: + rotlwi r3, r8, 28 /* Create EPN (bits 0-3) */ + mr r4, r3 /* RPN = EPN */ + ori r3, r3, (PPC44x_TLB_VALID | PPC44x_TLB_256M) /* SIZE = 256M, Valid */ + insrwi r3, r7, 1, 23 /* Set TS from r7 */ + + tlbwe r3, r6, PPC44x_TLB_PAGEID /* PageID field : EPN, V, SIZE */ + tlbwe r4, r6, PPC44x_TLB_XLAT /* Address translation : RPN */ + tlbwe r5, r6, PPC44x_TLB_ATTRIB /* Attributes */ + + addi r8, r8, 1 /* Increment PN */ + addi r6, r6, 1 /* Increment TLB Index */ + cmpwi r8, 8 /* Are we done ? */ + bne next_tlb + isync + + /* Jump to the new mapping 1:1 */ + li r9,0 + insrwi r9, r7, 1, 26 /* Set MSR[IS] = r7 */ + + bl 1f +1: mflr r8 + and r8, r8, r11 /* Get our offset within page */ + addi r8, r8, (2f-1b) + + and r5, r25, r10 /* Get our target PageNum */ + or r8, r8, r5 /* Target jump address */ + + mtspr SPRN_SRR0, r8 + mtspr SPRN_SRR1, r9 + rfi +2: + /* Invalidate the tmp entry we used */ + li r3, 0 + tlbwe r3, r24, PPC44x_TLB_PAGEID + sync + + /* Restore the parameters */ + mr r3, r29 + mr r4, r30 + mr r5, r31 + + li r0, 0 #else li r0, 0 diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 32656f105250..677ecccbe10d 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1730,6 +1730,17 @@ void __devinit pcibios_scan_phb(struct pci_controller *hose) if (mode == PCI_PROBE_NORMAL) hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); + + /* Configure PCI Express settings */ + if (bus && !pci_has_flag(PCI_PROBE_ONLY)) { + struct pci_bus *child; + list_for_each_entry(child, &bus->children, node) { + struct pci_dev *self = child->self; + if (!self) + continue; + pcie_bus_configure_settings(child, self->pcie_mpss); + } + } } static void fixup_hide_host_resource_fsl(struct pci_dev *dev) diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c index 03b95e2c6d65..0bbc901e7efc 100644 --- a/arch/powerpc/kernel/power6-pmu.c +++ b/arch/powerpc/kernel/power6-pmu.c @@ -487,8 +487,8 @@ static int power6_generic_events[] = { */ static int power6_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ - [C(OP_READ)] = { 0x80082, 0x80080 }, - [C(OP_WRITE)] = { 0x80086, 0x80088 }, + [C(OP_READ)] = { 0x280030, 0x80080 }, + [C(OP_WRITE)] = { 0x180032, 0x80088 }, [C(OP_PREFETCH)] = { 0x810a4, 0 }, }, [C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */ diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c index de83d6060dda..1251e4d7e262 100644 --- a/arch/powerpc/kernel/power7-pmu.c +++ b/arch/powerpc/kernel/power7-pmu.c @@ -297,6 +297,8 @@ static void power7_disable_pmc(unsigned int pmc, unsigned long mmcr[]) static int power7_generic_events[] = { [PERF_COUNT_HW_CPU_CYCLES] = 0x1e, + [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x100f8, /* GCT_NOSLOT_CYC */ + [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x4000a, /* CMPLU_STALL */ [PERF_COUNT_HW_INSTRUCTIONS] = 2, [PERF_COUNT_HW_CACHE_REFERENCES] = 0xc880, /* LD_REF_L1_LSU*/ [PERF_COUNT_HW_CACHE_MISSES] = 0x400f0, /* LD_MISS_L1 */ diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 174e1e96175e..8ad825c063c4 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -54,6 +54,8 @@ #include <asm/pci-bridge.h> #include <asm/phyp_dump.h> #include <asm/kexec.h> +#include <asm/opal.h> + #include <mm/mmu_decl.h> #ifdef DEBUG @@ -707,11 +709,23 @@ void __init early_init_devtree(void *params) of_scan_flat_dt(early_init_dt_scan_rtas, NULL); #endif +#ifdef CONFIG_PPC_POWERNV + /* Some machines might need OPAL info for debugging, grab it now. */ + of_scan_flat_dt(early_init_dt_scan_opal, NULL); +#endif + #ifdef CONFIG_PHYP_DUMP /* scan tree to see if dump occurred during last boot */ of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL); #endif + /* Pre-initialize the cmd_line with the content of boot_commmand_line, + * which will be empty except when the content of the variable has + * been overriden by a bootloading mechanism. This happens typically + * with HAL takeover + */ + strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE); + /* Retrieve various informations from the /chosen node of the * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... @@ -723,12 +737,15 @@ void __init early_init_devtree(void *params) of_scan_flat_dt(early_init_dt_scan_root, NULL); of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL); - setup_initial_memory_limit(memstart_addr, first_memblock_size); /* Save command line for /proc/cmdline and then parse parameters */ strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE); parse_early_param(); + /* make sure we've parsed cmdline for mem= before this */ + if (memory_limit) + first_memblock_size = min(first_memblock_size, memory_limit); + setup_initial_memory_limit(memstart_addr, first_memblock_size); /* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */ memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START); /* If relocatable, reserve first 32k for interrupt vectors etc. */ diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index a909f4e9343b..b4fa66127495 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -43,6 +43,7 @@ #include <asm/btext.h> #include <asm/sections.h> #include <asm/machdep.h> +#include <asm/opal.h> #include <linux/linux_logo.h> @@ -139,7 +140,9 @@ struct mem_map_entry { typedef u32 cell_t; -extern void __start(unsigned long r3, unsigned long r4, unsigned long r5); +extern void __start(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, unsigned long r8, + unsigned long r9); #ifdef CONFIG_PPC64 extern int enter_prom(struct prom_args *args, unsigned long entry); @@ -185,6 +188,7 @@ static unsigned long __initdata prom_tce_alloc_end; #define PLATFORM_LPAR 0x0001 #define PLATFORM_POWERMAC 0x0400 #define PLATFORM_GENERIC 0x0500 +#define PLATFORM_OPAL 0x0600 static int __initdata of_platform; @@ -644,7 +648,7 @@ static void __init early_cmdline_parse(void) } } -#ifdef CONFIG_PPC_PSERIES +#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) /* * There are two methods for telling firmware what our capabilities are. * Newer machines have an "ibm,client-architecture-support" method on the @@ -1274,6 +1278,284 @@ static void __init prom_init_mem(void) prom_printf(" ram_top : %x\n", RELOC(ram_top)); } +static void __init prom_close_stdin(void) +{ + struct prom_t *_prom = &RELOC(prom); + ihandle val; + + if (prom_getprop(_prom->chosen, "stdin", &val, sizeof(val)) > 0) + call_prom("close", 1, 0, val); +} + +#ifdef CONFIG_PPC_POWERNV + +static u64 __initdata prom_opal_size; +static u64 __initdata prom_opal_align; +static int __initdata prom_rtas_start_cpu; +static u64 __initdata prom_rtas_data; +static u64 __initdata prom_rtas_entry; + +#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL +static u64 __initdata prom_opal_base; +static u64 __initdata prom_opal_entry; +#endif + +/* XXX Don't change this structure without updating opal-takeover.S */ +static struct opal_secondary_data { + s64 ack; /* 0 */ + u64 go; /* 8 */ + struct opal_takeover_args args; /* 16 */ +} opal_secondary_data; + +extern char opal_secondary_entry; + +static void prom_query_opal(void) +{ + long rc; + + /* We must not query for OPAL presence on a machine that + * supports TNK takeover (970 blades), as this uses the same + * h-call with different arguments and will crash + */ + if (PHANDLE_VALID(call_prom("finddevice", 1, 1, + ADDR("/tnk-memory-map")))) { + prom_printf("TNK takeover detected, skipping OPAL check\n"); + return; + } + + prom_printf("Querying for OPAL presence... "); + rc = opal_query_takeover(&RELOC(prom_opal_size), + &RELOC(prom_opal_align)); + prom_debug("(rc = %ld) ", rc); + if (rc != 0) { + prom_printf("not there.\n"); + return; + } + RELOC(of_platform) = PLATFORM_OPAL; + prom_printf(" there !\n"); + prom_debug(" opal_size = 0x%lx\n", RELOC(prom_opal_size)); + prom_debug(" opal_align = 0x%lx\n", RELOC(prom_opal_align)); + if (RELOC(prom_opal_align) < 0x10000) + RELOC(prom_opal_align) = 0x10000; +} + +static int prom_rtas_call(int token, int nargs, int nret, int *outputs, ...) +{ + struct rtas_args rtas_args; + va_list list; + int i; + + rtas_args.token = token; + rtas_args.nargs = nargs; + rtas_args.nret = nret; + rtas_args.rets = (rtas_arg_t *)&(rtas_args.args[nargs]); + va_start(list, outputs); + for (i = 0; i < nargs; ++i) + rtas_args.args[i] = va_arg(list, rtas_arg_t); + va_end(list); + + for (i = 0; i < nret; ++i) + rtas_args.rets[i] = 0; + + opal_enter_rtas(&rtas_args, RELOC(prom_rtas_data), + RELOC(prom_rtas_entry)); + + if (nret > 1 && outputs != NULL) + for (i = 0; i < nret-1; ++i) + outputs[i] = rtas_args.rets[i+1]; + return (nret > 0)? rtas_args.rets[0]: 0; +} + +static void __init prom_opal_hold_cpus(void) +{ + int i, cnt, cpu, rc; + long j; + phandle node; + char type[64]; + u32 servers[8]; + struct prom_t *_prom = &RELOC(prom); + void *entry = (unsigned long *)&RELOC(opal_secondary_entry); + struct opal_secondary_data *data = &RELOC(opal_secondary_data); + + prom_debug("prom_opal_hold_cpus: start...\n"); + prom_debug(" - entry = 0x%x\n", entry); + prom_debug(" - data = 0x%x\n", data); + + data->ack = -1; + data->go = 0; + + /* look for cpus */ + for (node = 0; prom_next_node(&node); ) { + type[0] = 0; + prom_getprop(node, "device_type", type, sizeof(type)); + if (strcmp(type, RELOC("cpu")) != 0) + continue; + + /* Skip non-configured cpus. */ + if (prom_getprop(node, "status", type, sizeof(type)) > 0) + if (strcmp(type, RELOC("okay")) != 0) + continue; + + cnt = prom_getprop(node, "ibm,ppc-interrupt-server#s", servers, + sizeof(servers)); + if (cnt == PROM_ERROR) + break; + cnt >>= 2; + for (i = 0; i < cnt; i++) { + cpu = servers[i]; + prom_debug("CPU %d ... ", cpu); + if (cpu == _prom->cpu) { + prom_debug("booted !\n"); + continue; + } + prom_debug("starting ... "); + + /* Init the acknowledge var which will be reset by + * the secondary cpu when it awakens from its OF + * spinloop. + */ + data->ack = -1; + rc = prom_rtas_call(RELOC(prom_rtas_start_cpu), 3, 1, + NULL, cpu, entry, data); + prom_debug("rtas rc=%d ...", rc); + + for (j = 0; j < 100000000 && data->ack == -1; j++) { + HMT_low(); + mb(); + } + HMT_medium(); + if (data->ack != -1) + prom_debug("done, PIR=0x%x\n", data->ack); + else + prom_debug("timeout !\n"); + } + } + prom_debug("prom_opal_hold_cpus: end...\n"); +} + +static void prom_opal_takeover(void) +{ + struct opal_secondary_data *data = &RELOC(opal_secondary_data); + struct opal_takeover_args *args = &data->args; + u64 align = RELOC(prom_opal_align); + u64 top_addr, opal_addr; + + args->k_image = (u64)RELOC(_stext); + args->k_size = _end - _stext; + args->k_entry = 0; + args->k_entry2 = 0x60; + + top_addr = _ALIGN_UP(args->k_size, align); + + if (RELOC(prom_initrd_start) != 0) { + args->rd_image = RELOC(prom_initrd_start); + args->rd_size = RELOC(prom_initrd_end) - args->rd_image; + args->rd_loc = top_addr; + top_addr = _ALIGN_UP(args->rd_loc + args->rd_size, align); + } + + /* Pickup an address for the HAL. We want to go really high + * up to avoid problem with future kexecs. On the other hand + * we don't want to be all over the TCEs on P5IOC2 machines + * which are going to be up there too. We assume the machine + * has plenty of memory, and we ask for the HAL for now to + * be just below the 1G point, or above the initrd + */ + opal_addr = _ALIGN_DOWN(0x40000000 - RELOC(prom_opal_size), align); + if (opal_addr < top_addr) + opal_addr = top_addr; + args->hal_addr = opal_addr; + + /* Copy the command line to the kernel image */ + strlcpy(RELOC(boot_command_line), RELOC(prom_cmd_line), + COMMAND_LINE_SIZE); + + prom_debug(" k_image = 0x%lx\n", args->k_image); + prom_debug(" k_size = 0x%lx\n", args->k_size); + prom_debug(" k_entry = 0x%lx\n", args->k_entry); + prom_debug(" k_entry2 = 0x%lx\n", args->k_entry2); + prom_debug(" hal_addr = 0x%lx\n", args->hal_addr); + prom_debug(" rd_image = 0x%lx\n", args->rd_image); + prom_debug(" rd_size = 0x%lx\n", args->rd_size); + prom_debug(" rd_loc = 0x%lx\n", args->rd_loc); + prom_printf("Performing OPAL takeover,this can take a few minutes..\n"); + prom_close_stdin(); + mb(); + data->go = 1; + for (;;) + opal_do_takeover(args); +} + +/* + * Allocate room for and instantiate OPAL + */ +static void __init prom_instantiate_opal(void) +{ + phandle opal_node; + ihandle opal_inst; + u64 base, entry; + u64 size = 0, align = 0x10000; + u32 rets[2]; + + prom_debug("prom_instantiate_opal: start...\n"); + + opal_node = call_prom("finddevice", 1, 1, ADDR("/ibm,opal")); + prom_debug("opal_node: %x\n", opal_node); + if (!PHANDLE_VALID(opal_node)) + return; + + prom_getprop(opal_node, "opal-runtime-size", &size, sizeof(size)); + if (size == 0) + return; + prom_getprop(opal_node, "opal-runtime-alignment", &align, + sizeof(align)); + + base = alloc_down(size, align, 0); + if (base == 0) { + prom_printf("OPAL allocation failed !\n"); + return; + } + + opal_inst = call_prom("open", 1, 1, ADDR("/ibm,opal")); + if (!IHANDLE_VALID(opal_inst)) { + prom_printf("opening opal package failed (%x)\n", opal_inst); + return; + } + + prom_printf("instantiating opal at 0x%x...", base); + + if (call_prom_ret("call-method", 4, 3, rets, + ADDR("load-opal-runtime"), + opal_inst, + base >> 32, base & 0xffffffff) != 0 + || (rets[0] == 0 && rets[1] == 0)) { + prom_printf(" failed\n"); + return; + } + entry = (((u64)rets[0]) << 32) | rets[1]; + + prom_printf(" done\n"); + + reserve_mem(base, size); + + prom_debug("opal base = 0x%x\n", base); + prom_debug("opal align = 0x%x\n", align); + prom_debug("opal entry = 0x%x\n", entry); + prom_debug("opal size = 0x%x\n", (long)size); + + prom_setprop(opal_node, "/ibm,opal", "opal-base-address", + &base, sizeof(base)); + prom_setprop(opal_node, "/ibm,opal", "opal-entry-address", + &entry, sizeof(entry)); + +#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL + RELOC(prom_opal_base) = base; + RELOC(prom_opal_entry) = entry; +#endif + prom_debug("prom_instantiate_opal: end...\n"); +} + +#endif /* CONFIG_PPC_POWERNV */ /* * Allocate room for and instantiate RTAS @@ -1326,6 +1608,12 @@ static void __init prom_instantiate_rtas(void) prom_setprop(rtas_node, "/rtas", "linux,rtas-entry", &entry, sizeof(entry)); +#ifdef CONFIG_PPC_POWERNV + /* PowerVN takeover hack */ + RELOC(prom_rtas_data) = base; + RELOC(prom_rtas_entry) = entry; + prom_getprop(rtas_node, "start-cpu", &RELOC(prom_rtas_start_cpu), 4); +#endif prom_debug("rtas base = 0x%x\n", base); prom_debug("rtas entry = 0x%x\n", entry); prom_debug("rtas size = 0x%x\n", (long)size); @@ -1543,7 +1831,7 @@ static void __init prom_hold_cpus(void) *acknowledge = (unsigned long)-1; if (reg != _prom->cpu) { - /* Primary Thread of non-boot cpu */ + /* Primary Thread of non-boot cpu or any thread */ prom_printf("starting cpu hw idx %lu... ", reg); call_prom("start-cpu", 3, 0, node, secondary_hold, reg); @@ -1652,15 +1940,6 @@ static void __init prom_init_stdout(void) prom_setprop(val, path, "linux,boot-display", NULL, 0); } -static void __init prom_close_stdin(void) -{ - struct prom_t *_prom = &RELOC(prom); - ihandle val; - - if (prom_getprop(_prom->chosen, "stdin", &val, sizeof(val)) > 0) - call_prom("close", 1, 0, val); -} - static int __init prom_find_machine_type(void) { struct prom_t *_prom = &RELOC(prom); @@ -1671,7 +1950,7 @@ static int __init prom_find_machine_type(void) int x; #endif - /* Look for a PowerMac */ + /* Look for a PowerMac or a Cell */ len = prom_getprop(_prom->root, "compatible", compat, sizeof(compat)-1); if (len > 0) { @@ -1697,7 +1976,11 @@ static int __init prom_find_machine_type(void) } } #ifdef CONFIG_PPC64 - /* If not a mac, try to figure out if it's an IBM pSeries or any other + /* Try to detect OPAL */ + if (PHANDLE_VALID(call_prom("finddevice", 1, 1, ADDR("/ibm,opal")))) + return PLATFORM_OPAL; + + /* Try to figure out if it's an IBM pSeries or any other * PAPR compliant platform. We assume it is if : * - /device_type is "chrp" (please, do NOT use that for future * non-IBM designs ! @@ -1924,7 +2207,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, unsigned long soff; unsigned char *valp; static char pname[MAX_PROPERTY_NAME]; - int l, room; + int l, room, has_phandle = 0; dt_push_token(OF_DT_BEGIN_NODE, mem_start, mem_end); @@ -2008,19 +2291,26 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, valp = make_room(mem_start, mem_end, l, 4); call_prom("getprop", 4, 1, node, RELOC(pname), valp, l); *mem_start = _ALIGN(*mem_start, 4); + + if (!strcmp(RELOC(pname), RELOC("phandle"))) + has_phandle = 1; } - /* Add a "linux,phandle" property. */ - soff = dt_find_string(RELOC("linux,phandle")); - if (soff == 0) - prom_printf("WARNING: Can't find string index for" - " <linux-phandle> node %s\n", path); - else { - dt_push_token(OF_DT_PROP, mem_start, mem_end); - dt_push_token(4, mem_start, mem_end); - dt_push_token(soff, mem_start, mem_end); - valp = make_room(mem_start, mem_end, 4, 4); - *(u32 *)valp = node; + /* Add a "linux,phandle" property if no "phandle" property already + * existed (can happen with OPAL) + */ + if (!has_phandle) { + soff = dt_find_string(RELOC("linux,phandle")); + if (soff == 0) + prom_printf("WARNING: Can't find string index for" + " <linux-phandle> node %s\n", path); + else { + dt_push_token(OF_DT_PROP, mem_start, mem_end); + dt_push_token(4, mem_start, mem_end); + dt_push_token(soff, mem_start, mem_end); + valp = make_room(mem_start, mem_end, 4, 4); + *(u32 *)valp = node; + } } /* do all our children */ @@ -2504,6 +2794,7 @@ static void __init prom_check_initrd(unsigned long r3, unsigned long r4) #endif /* CONFIG_BLK_DEV_INITRD */ } + /* * We enter here early on, when the Open Firmware prom is still * handling exceptions and the MMU hash table for us. @@ -2553,6 +2844,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, * between pSeries SMP and pSeries LPAR */ RELOC(of_platform) = prom_find_machine_type(); + prom_printf("Detected machine type: %x\n", RELOC(of_platform)); #ifndef CONFIG_RELOCATABLE /* Bail if this is a kdump kernel. */ @@ -2565,7 +2857,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, */ prom_check_initrd(r3, r4); -#ifdef CONFIG_PPC_PSERIES +#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) /* * On pSeries, inform the firmware about our capabilities */ @@ -2611,14 +2903,33 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, #endif /* - * On non-powermacs, try to instantiate RTAS and puts all CPUs - * in spin-loops. PowerMacs don't have a working RTAS and use - * a different way to spin CPUs + * On non-powermacs, try to instantiate RTAS. PowerMacs don't + * have a usable RTAS implementation. */ - if (RELOC(of_platform) != PLATFORM_POWERMAC) { + if (RELOC(of_platform) != PLATFORM_POWERMAC && + RELOC(of_platform) != PLATFORM_OPAL) prom_instantiate_rtas(); + +#ifdef CONFIG_PPC_POWERNV + /* Detect HAL and try instanciating it & doing takeover */ + if (RELOC(of_platform) == PLATFORM_PSERIES_LPAR) { + prom_query_opal(); + if (RELOC(of_platform) == PLATFORM_OPAL) { + prom_opal_hold_cpus(); + prom_opal_takeover(); + } + } else if (RELOC(of_platform) == PLATFORM_OPAL) + prom_instantiate_opal(); +#endif + + /* + * On non-powermacs, put all CPUs in spin-loops. + * + * PowerMacs use a different mechanism to spin CPUs + */ + if (RELOC(of_platform) != PLATFORM_POWERMAC && + RELOC(of_platform) != PLATFORM_OPAL) prom_hold_cpus(); - } /* * Fill in some infos for use by the kernel later on @@ -2685,7 +2996,13 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, reloc_got2(-offset); #endif - __start(hdr, kbase, 0); +#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL + /* OPAL early debug gets the OPAL base & entry in r8 and r9 */ + __start(hdr, kbase, 0, 0, 0, + RELOC(prom_opal_base), RELOC(prom_opal_entry)); +#else + __start(hdr, kbase, 0, 0, 0, 0, 0); +#endif return 0; } diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh index 9f82f4937892..70f4286eaa7a 100644 --- a/arch/powerpc/kernel/prom_init_check.sh +++ b/arch/powerpc/kernel/prom_init_check.sh @@ -20,7 +20,9 @@ WHITELIST="add_reloc_offset __bss_start __bss_stop copy_and_flush _end enter_prom memcpy memset reloc_offset __secondary_hold __secondary_hold_acknowledge __secondary_hold_spinloop __start strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224 -reloc_got2 kernstart_addr memstart_addr linux_banner" +reloc_got2 kernstart_addr memstart_addr linux_banner _stext +opal_query_takeover opal_do_takeover opal_enter_rtas opal_secondary_entry +boot_command_line" NM="$1" OBJ="$2" diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 05b7dd217f60..18447c4fbad3 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -1497,9 +1497,14 @@ long arch_ptrace(struct task_struct *child, long request, if (index < PT_FPR0) { tmp = ptrace_get_reg(child, (int) index); } else { + unsigned int fpidx = index - PT_FPR0; + flush_fp_to_thread(child); - tmp = ((unsigned long *)child->thread.fpr) - [TS_FPRWIDTH * (index - PT_FPR0)]; + if (fpidx < (PT_FPSCR - PT_FPR0)) + tmp = ((unsigned long *)child->thread.fpr) + [fpidx * TS_FPRWIDTH]; + else + tmp = child->thread.fpscr.val; } ret = put_user(tmp, datalp); break; @@ -1525,9 +1530,14 @@ long arch_ptrace(struct task_struct *child, long request, if (index < PT_FPR0) { ret = ptrace_put_reg(child, index, data); } else { + unsigned int fpidx = index - PT_FPR0; + flush_fp_to_thread(child); - ((unsigned long *)child->thread.fpr) - [TS_FPRWIDTH * (index - PT_FPR0)] = data; + if (fpidx < (PT_FPSCR - PT_FPR0)) + ((unsigned long *)child->thread.fpr) + [fpidx * TS_FPRWIDTH] = data; + else + child->thread.fpscr.val = data; ret = 0; } break; diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 209135af0a40..c1ce86357ecb 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -117,7 +117,7 @@ notrace unsigned long __init early_init(unsigned long dt_ptr) * This is called very early on the boot process, after a minimal * MMU environment has been set up but before MMU_init is called. */ -notrace void __init machine_init(unsigned long dt_ptr) +notrace void __init machine_init(u64 dt_ptr) { lockdep_init(); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index aebef1320ed7..d4168c93098f 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -278,14 +278,14 @@ static void __init initialize_cache_info(void) DBG(" -> initialize_cache_info()\n"); - for (np = NULL; (np = of_find_node_by_type(np, "cpu"));) { + for_each_node_by_type(np, "cpu") { num_cpus += 1; - /* We're assuming *all* of the CPUs have the same + /* + * We're assuming *all* of the CPUs have the same * d-cache and i-cache sizes... -Peter */ - - if ( num_cpus == 1 ) { + if (num_cpus == 1) { const u32 *sizep, *lsizep; u32 size, lsize; @@ -294,10 +294,13 @@ static void __init initialize_cache_info(void) sizep = of_get_property(np, "d-cache-size", NULL); if (sizep != NULL) size = *sizep; - lsizep = of_get_property(np, "d-cache-block-size", NULL); + lsizep = of_get_property(np, "d-cache-block-size", + NULL); /* fallback if block size missing */ if (lsizep == NULL) - lsizep = of_get_property(np, "d-cache-line-size", NULL); + lsizep = of_get_property(np, + "d-cache-line-size", + NULL); if (lsizep != NULL) lsize = *lsizep; if (sizep == 0 || lsizep == 0) @@ -314,9 +317,12 @@ static void __init initialize_cache_info(void) sizep = of_get_property(np, "i-cache-size", NULL); if (sizep != NULL) size = *sizep; - lsizep = of_get_property(np, "i-cache-block-size", NULL); + lsizep = of_get_property(np, "i-cache-block-size", + NULL); if (lsizep == NULL) - lsizep = of_get_property(np, "i-cache-line-size", NULL); + lsizep = of_get_property(np, + "i-cache-line-size", + NULL); if (lsizep != NULL) lsize = *lsizep; if (sizep == 0 || lsizep == 0) diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 7bf2187dfd99..af7e7722ecae 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -70,6 +70,10 @@ static DEFINE_PER_CPU(struct task_struct *, idle_thread_array); #define get_idle_for_cpu(x) (per_cpu(idle_thread_array, x)) #define set_idle_for_cpu(x, p) (per_cpu(idle_thread_array, x) = (p)) + +/* State of each CPU during hotplug phases */ +static DEFINE_PER_CPU(int, cpu_state) = { 0 }; + #else static struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ; #define get_idle_for_cpu(x) (idle_thread_array[(x)]) @@ -104,12 +108,25 @@ int __devinit smp_generic_kick_cpu(int nr) * cpu_start field to become non-zero After we set cpu_start, * the processor will continue on to secondary_start */ - paca[nr].cpu_start = 1; - smp_mb(); + if (!paca[nr].cpu_start) { + paca[nr].cpu_start = 1; + smp_mb(); + return 0; + } + +#ifdef CONFIG_HOTPLUG_CPU + /* + * Ok it's not there, so it might be soft-unplugged, let's + * try to bring it back + */ + per_cpu(cpu_state, nr) = CPU_UP_PREPARE; + smp_wmb(); + smp_send_reschedule(nr); +#endif /* CONFIG_HOTPLUG_CPU */ return 0; } -#endif +#endif /* CONFIG_PPC64 */ static irqreturn_t call_function_action(int irq, void *data) { @@ -357,8 +374,6 @@ void __devinit smp_prepare_boot_cpu(void) } #ifdef CONFIG_HOTPLUG_CPU -/* State of each CPU during hotplug phases */ -static DEFINE_PER_CPU(int, cpu_state) = { 0 }; int generic_cpu_disable(void) { @@ -406,6 +421,11 @@ void generic_set_cpu_dead(unsigned int cpu) { per_cpu(cpu_state, cpu) = CPU_DEAD; } + +int generic_check_cpu_restart(unsigned int cpu) +{ + return per_cpu(cpu_state, cpu) == CPU_UP_PREPARE; +} #endif struct create_idle { diff --git a/arch/powerpc/kernel/swsusp.c b/arch/powerpc/kernel/swsusp.c index aa17b76dd427..641f9adc6205 100644 --- a/arch/powerpc/kernel/swsusp.c +++ b/arch/powerpc/kernel/swsusp.c @@ -33,6 +33,6 @@ void save_processor_state(void) void restore_processor_state(void) { #ifdef CONFIG_PPC32 - switch_mmu_context(NULL, current->active_mm); + switch_mmu_context(current->active_mm, current->active_mm); #endif } diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index f19d9777d3c1..4e5908264d1a 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -457,7 +457,14 @@ int machine_check_e500mc(struct pt_regs *regs) if (reason & MCSR_DCPERR_MC) { printk("Data Cache Parity Error\n"); - recoverable = 0; + + /* + * In write shadow mode we auto-recover from the error, but it + * may still get logged and cause a machine check. We should + * only treat the non-write shadow case as non-recoverable. + */ + if (!(mfspr(SPRN_L1CSR2) & L1CSR2_DCWS)) + recoverable = 0; } if (reason & MCSR_L2MMU_MHIT) { diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index b4607a91d1f4..57fa2c0a531c 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -69,6 +69,12 @@ void __init udbg_early_init(void) udbg_init_wsp(); #elif defined(CONFIG_PPC_EARLY_DEBUG_EHV_BC) udbg_init_ehv_bc(); +#elif defined(CONFIG_PPC_EARLY_DEBUG_PS3GELIC) + udbg_init_ps3gelic(); +#elif defined(CONFIG_PPC_EARLY_DEBUG_OPAL_RAW) + udbg_init_debug_opal_raw(); +#elif defined(CONFIG_PPC_EARLY_DEBUG_OPAL_HVSI) + udbg_init_debug_opal_hvsi(); #endif #ifdef CONFIG_PPC_EARLY_DEBUG diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index 1b695fdc362b..34d291d83ec8 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -605,15 +605,20 @@ static int vio_dma_iommu_dma_supported(struct device *dev, u64 mask) return dma_iommu_ops.dma_supported(dev, mask); } -struct dma_map_ops vio_dma_mapping_ops = { - .alloc_coherent = vio_dma_iommu_alloc_coherent, - .free_coherent = vio_dma_iommu_free_coherent, - .map_sg = vio_dma_iommu_map_sg, - .unmap_sg = vio_dma_iommu_unmap_sg, - .map_page = vio_dma_iommu_map_page, - .unmap_page = vio_dma_iommu_unmap_page, - .dma_supported = vio_dma_iommu_dma_supported, +static u64 vio_dma_get_required_mask(struct device *dev) +{ + return dma_iommu_ops.get_required_mask(dev); +} +struct dma_map_ops vio_dma_mapping_ops = { + .alloc_coherent = vio_dma_iommu_alloc_coherent, + .free_coherent = vio_dma_iommu_free_coherent, + .map_sg = vio_dma_iommu_map_sg, + .unmap_sg = vio_dma_iommu_unmap_sg, + .map_page = vio_dma_iommu_map_page, + .unmap_page = vio_dma_iommu_unmap_page, + .dma_supported = vio_dma_iommu_dma_supported, + .get_required_mask = vio_dma_get_required_mask, }; /** diff --git a/arch/powerpc/math-emu/math_efp.c b/arch/powerpc/math-emu/math_efp.c index 62279200d965..a73f0884d358 100644 --- a/arch/powerpc/math-emu/math_efp.c +++ b/arch/powerpc/math-emu/math_efp.c @@ -171,10 +171,6 @@ static unsigned long insn_type(unsigned long speinsn) case EFDNABS: ret = XA; break; case EFDNEG: ret = XA; break; case EFDSUB: ret = AB; break; - - default: - printk(KERN_ERR "\nOoops! SPE instruction no type found."); - printk(KERN_ERR "\ninst code: %08lx\n", speinsn); } return ret; @@ -195,7 +191,7 @@ int do_spe_mathemu(struct pt_regs *regs) type = insn_type(speinsn); if (type == NOTYPE) - return -ENOSYS; + goto illegal; func = speinsn & 0x7ff; fc = (speinsn >> 21) & 0x1f; @@ -212,12 +208,10 @@ int do_spe_mathemu(struct pt_regs *regs) __FPU_FPSCR = mfspr(SPRN_SPEFSCR); -#ifdef DEBUG - printk("speinsn:%08lx spefscr:%08lx\n", speinsn, __FPU_FPSCR); - printk("vc: %08x %08x\n", vc.wp[0], vc.wp[1]); - printk("va: %08x %08x\n", va.wp[0], va.wp[1]); - printk("vb: %08x %08x\n", vb.wp[0], vb.wp[1]); -#endif + pr_debug("speinsn:%08lx spefscr:%08lx\n", speinsn, __FPU_FPSCR); + pr_debug("vc: %08x %08x\n", vc.wp[0], vc.wp[1]); + pr_debug("va: %08x %08x\n", va.wp[0], va.wp[1]); + pr_debug("vb: %08x %08x\n", vb.wp[0], vb.wp[1]); switch (src) { case SPFP: { @@ -235,10 +229,8 @@ int do_spe_mathemu(struct pt_regs *regs) break; } -#ifdef DEBUG - printk("SA: %ld %08lx %ld (%ld)\n", SA_s, SA_f, SA_e, SA_c); - printk("SB: %ld %08lx %ld (%ld)\n", SB_s, SB_f, SB_e, SB_c); -#endif + pr_debug("SA: %ld %08lx %ld (%ld)\n", SA_s, SA_f, SA_e, SA_c); + pr_debug("SB: %ld %08lx %ld (%ld)\n", SB_s, SB_f, SB_e, SB_c); switch (func) { case EFSABS: @@ -305,10 +297,10 @@ int do_spe_mathemu(struct pt_regs *regs) FP_DECL_D(DB); FP_CLEAR_EXCEPTIONS; FP_UNPACK_DP(DB, vb.dp); -#ifdef DEBUG - printk("DB: %ld %08lx %08lx %ld (%ld)\n", + + pr_debug("DB: %ld %08lx %08lx %ld (%ld)\n", DB_s, DB_f1, DB_f0, DB_e, DB_c); -#endif + FP_CONV(S, D, 1, 2, SR, DB); goto pack_s; } @@ -332,9 +324,8 @@ int do_spe_mathemu(struct pt_regs *regs) break; pack_s: -#ifdef DEBUG - printk("SR: %ld %08lx %ld (%ld)\n", SR_s, SR_f, SR_e, SR_c); -#endif + pr_debug("SR: %ld %08lx %ld (%ld)\n", SR_s, SR_f, SR_e, SR_c); + FP_PACK_SP(vc.wp + 1, SR); goto update_regs; @@ -365,12 +356,10 @@ cmp_s: break; } -#ifdef DEBUG - printk("DA: %ld %08lx %08lx %ld (%ld)\n", + pr_debug("DA: %ld %08lx %08lx %ld (%ld)\n", DA_s, DA_f1, DA_f0, DA_e, DA_c); - printk("DB: %ld %08lx %08lx %ld (%ld)\n", + pr_debug("DB: %ld %08lx %08lx %ld (%ld)\n", DB_s, DB_f1, DB_f0, DB_e, DB_c); -#endif switch (func) { case EFDABS: @@ -438,10 +427,10 @@ cmp_s: FP_DECL_S(SB); FP_CLEAR_EXCEPTIONS; FP_UNPACK_SP(SB, vb.wp + 1); -#ifdef DEBUG - printk("SB: %ld %08lx %ld (%ld)\n", + + pr_debug("SB: %ld %08lx %ld (%ld)\n", SB_s, SB_f, SB_e, SB_c); -#endif + FP_CONV(D, S, 2, 1, DR, SB); goto pack_d; } @@ -471,10 +460,9 @@ cmp_s: break; pack_d: -#ifdef DEBUG - printk("DR: %ld %08lx %08lx %ld (%ld)\n", + pr_debug("DR: %ld %08lx %08lx %ld (%ld)\n", DR_s, DR_f1, DR_f0, DR_e, DR_c); -#endif + FP_PACK_DP(vc.dp, DR); goto update_regs; @@ -511,12 +499,14 @@ cmp_d: break; } -#ifdef DEBUG - printk("SA0: %ld %08lx %ld (%ld)\n", SA0_s, SA0_f, SA0_e, SA0_c); - printk("SA1: %ld %08lx %ld (%ld)\n", SA1_s, SA1_f, SA1_e, SA1_c); - printk("SB0: %ld %08lx %ld (%ld)\n", SB0_s, SB0_f, SB0_e, SB0_c); - printk("SB1: %ld %08lx %ld (%ld)\n", SB1_s, SB1_f, SB1_e, SB1_c); -#endif + pr_debug("SA0: %ld %08lx %ld (%ld)\n", + SA0_s, SA0_f, SA0_e, SA0_c); + pr_debug("SA1: %ld %08lx %ld (%ld)\n", + SA1_s, SA1_f, SA1_e, SA1_c); + pr_debug("SB0: %ld %08lx %ld (%ld)\n", + SB0_s, SB0_f, SB0_e, SB0_c); + pr_debug("SB1: %ld %08lx %ld (%ld)\n", + SB1_s, SB1_f, SB1_e, SB1_c); switch (func) { case EVFSABS: @@ -605,10 +595,11 @@ cmp_d: break; pack_vs: -#ifdef DEBUG - printk("SR0: %ld %08lx %ld (%ld)\n", SR0_s, SR0_f, SR0_e, SR0_c); - printk("SR1: %ld %08lx %ld (%ld)\n", SR1_s, SR1_f, SR1_e, SR1_c); -#endif + pr_debug("SR0: %ld %08lx %ld (%ld)\n", + SR0_s, SR0_f, SR0_e, SR0_c); + pr_debug("SR1: %ld %08lx %ld (%ld)\n", + SR1_s, SR1_f, SR1_e, SR1_c); + FP_PACK_SP(vc.wp, SR0); FP_PACK_SP(vc.wp + 1, SR1); goto update_regs; @@ -646,14 +637,12 @@ update_regs: current->thread.evr[fc] = vc.wp[0]; regs->gpr[fc] = vc.wp[1]; -#ifdef DEBUG - printk("ccr = %08lx\n", regs->ccr); - printk("cur exceptions = %08x spefscr = %08lx\n", + pr_debug("ccr = %08lx\n", regs->ccr); + pr_debug("cur exceptions = %08x spefscr = %08lx\n", FP_CUR_EXCEPTIONS, __FPU_FPSCR); - printk("vc: %08x %08x\n", vc.wp[0], vc.wp[1]); - printk("va: %08x %08x\n", va.wp[0], va.wp[1]); - printk("vb: %08x %08x\n", vb.wp[0], vb.wp[1]); -#endif + pr_debug("vc: %08x %08x\n", vc.wp[0], vc.wp[1]); + pr_debug("va: %08x %08x\n", va.wp[0], va.wp[1]); + pr_debug("vb: %08x %08x\n", vb.wp[0], vb.wp[1]); return 0; @@ -661,9 +650,7 @@ illegal: if (have_e500_cpu_a005_erratum) { /* according to e500 cpu a005 erratum, reissue efp inst */ regs->nip -= 4; -#ifdef DEBUG - printk(KERN_DEBUG "re-issue efp inst: %08lx\n", speinsn); -#endif + pr_debug("re-issue efp inst: %08lx\n", speinsn); return 0; } @@ -685,13 +672,20 @@ int speround_handler(struct pt_regs *regs) type = insn_type(speinsn & 0x7ff); if (type == XCR) return -ENOSYS; + __FPU_FPSCR = mfspr(SPRN_SPEFSCR); + pr_debug("speinsn:%08lx spefscr:%08lx\n", speinsn, __FPU_FPSCR); + + /* No need to round if the result is exact */ + if (!(__FPU_FPSCR & FP_EX_INEXACT)) + return 0; + fc = (speinsn >> 21) & 0x1f; s_lo = regs->gpr[fc] & SIGN_BIT_S; s_hi = current->thread.evr[fc] & SIGN_BIT_S; fgpr.wp[0] = current->thread.evr[fc]; fgpr.wp[1] = regs->gpr[fc]; - __FPU_FPSCR = mfspr(SPRN_SPEFSCR); + pr_debug("round fgpr: %08x %08x\n", fgpr.wp[0], fgpr.wp[1]); switch ((speinsn >> 5) & 0x7) { /* Since SPE instructions on E500 core can handle round to nearest @@ -731,6 +725,8 @@ int speround_handler(struct pt_regs *regs) current->thread.evr[fc] = fgpr.wp[0]; regs->gpr[fc] = fgpr.wp[1]; + pr_debug(" to fgpr: %08x %08x\n", fgpr.wp[0], fgpr.wp[1]); + return 0; } diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index bdca46e08382..991ee813d2a8 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_PPC_MM_SLICES) += slice.o ifeq ($(CONFIG_HUGETLB_PAGE),y) obj-y += hugetlbpage.o obj-$(CONFIG_PPC_STD_MMU_64) += hugetlbpage-hash64.o +obj-$(CONFIG_PPC_BOOK3E_MMU) += hugetlbpage-book3e.o endif obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index f7802c8bba0a..66a6fd38e9cd 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -101,17 +101,17 @@ unsigned long p_mapped_by_tlbcam(phys_addr_t pa) /* * Set up a variable-size TLB entry (tlbcam). The parameters are not checked; - * in particular size must be a power of 4 between 4k and 256M (or 1G, for cpus - * that support extended page sizes). Note that while some cpus support a - * page size of 4G, we don't allow its use here. + * in particular size must be a power of 4 between 4k and the max supported by + * an implementation; max may further be limited by what can be represented in + * an unsigned long (for example, 32-bit implementations cannot support a 4GB + * size). */ static void settlbcam(int index, unsigned long virt, phys_addr_t phys, unsigned long size, unsigned long flags, unsigned int pid) { - unsigned int tsize, lz; + unsigned int tsize; - asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (size)); - tsize = 21 - lz; + tsize = __ilog2(size) - 10; #ifdef CONFIG_SMP if ((flags & _PAGE_NO_CACHE) == 0) @@ -146,29 +146,36 @@ static void settlbcam(int index, unsigned long virt, phys_addr_t phys, loadcam_entry(index); } +unsigned long calc_cam_sz(unsigned long ram, unsigned long virt, + phys_addr_t phys) +{ + unsigned int camsize = __ilog2(ram) & ~1U; + unsigned int align = __ffs(virt | phys) & ~1U; + unsigned long max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf; + + /* Convert (4^max) kB to (2^max) bytes */ + max_cam = max_cam * 2 + 10; + + if (camsize > align) + camsize = align; + if (camsize > max_cam) + camsize = max_cam; + + return 1UL << camsize; +} + unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx) { int i; unsigned long virt = PAGE_OFFSET; phys_addr_t phys = memstart_addr; unsigned long amount_mapped = 0; - unsigned long max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf; - - /* Convert (4^max) kB to (2^max) bytes */ - max_cam = max_cam * 2 + 10; /* Calculate CAM values */ for (i = 0; ram && i < max_cam_idx; i++) { - unsigned int camsize = __ilog2(ram) & ~1U; - unsigned int align = __ffs(virt | phys) & ~1U; unsigned long cam_sz; - if (camsize > align) - camsize = align; - if (camsize > max_cam) - camsize = max_cam; - - cam_sz = 1UL << camsize; + cam_sz = calc_cam_sz(ram, virt, phys); settlbcam(i, virt, phys, cam_sz, PAGE_KERNEL_X, 0); ram -= cam_sz; diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 26b2872b3d00..1628201c8cea 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -105,9 +105,6 @@ int mmu_kernel_ssize = MMU_SEGSIZE_256M; int mmu_highuser_ssize = MMU_SEGSIZE_256M; u16 mmu_slb_size = 64; EXPORT_SYMBOL_GPL(mmu_slb_size); -#ifdef CONFIG_HUGETLB_PAGE -unsigned int HPAGE_SHIFT; -#endif #ifdef CONFIG_PPC_64K_PAGES int mmu_ci_restrictions; #endif @@ -534,11 +531,11 @@ static unsigned long __init htab_get_table_size(void) } #ifdef CONFIG_MEMORY_HOTPLUG -void create_section_mapping(unsigned long start, unsigned long end) +int create_section_mapping(unsigned long start, unsigned long end) { - BUG_ON(htab_bolt_mapping(start, end, __pa(start), + return htab_bolt_mapping(start, end, __pa(start), pgprot_val(PAGE_KERNEL), mmu_linear_psize, - mmu_kernel_ssize)); + mmu_kernel_ssize); } int remove_section_mapping(unsigned long start, unsigned long end) diff --git a/arch/powerpc/mm/hugetlbpage-book3e.c b/arch/powerpc/mm/hugetlbpage-book3e.c new file mode 100644 index 000000000000..343ad0b87261 --- /dev/null +++ b/arch/powerpc/mm/hugetlbpage-book3e.c @@ -0,0 +1,121 @@ +/* + * PPC Huge TLB Page Support for Book3E MMU + * + * Copyright (C) 2009 David Gibson, IBM Corporation. + * Copyright (C) 2011 Becky Bruce, Freescale Semiconductor + * + */ +#include <linux/mm.h> +#include <linux/hugetlb.h> + +static inline int mmu_get_tsize(int psize) +{ + return mmu_psize_defs[psize].enc; +} + +static inline int book3e_tlb_exists(unsigned long ea, unsigned long pid) +{ + int found = 0; + + mtspr(SPRN_MAS6, pid << 16); + if (mmu_has_feature(MMU_FTR_USE_TLBRSRV)) { + asm volatile( + "li %0,0\n" + "tlbsx. 0,%1\n" + "bne 1f\n" + "li %0,1\n" + "1:\n" + : "=&r"(found) : "r"(ea)); + } else { + asm volatile( + "tlbsx 0,%1\n" + "mfspr %0,0x271\n" + "srwi %0,%0,31\n" + : "=&r"(found) : "r"(ea)); + } + + return found; +} + +void book3e_hugetlb_preload(struct mm_struct *mm, unsigned long ea, pte_t pte) +{ + unsigned long mas1, mas2; + u64 mas7_3; + unsigned long psize, tsize, shift; + unsigned long flags; + +#ifdef CONFIG_PPC_FSL_BOOK3E + int index, lz, ncams; + struct vm_area_struct *vma; +#endif + + if (unlikely(is_kernel_addr(ea))) + return; + +#ifdef CONFIG_PPC_MM_SLICES + psize = mmu_get_tsize(get_slice_psize(mm, ea)); + tsize = mmu_get_psize(psize); + shift = mmu_psize_defs[psize].shift; +#else + vma = find_vma(mm, ea); + psize = vma_mmu_pagesize(vma); /* returns actual size in bytes */ + asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (psize)); + shift = 31 - lz; + tsize = 21 - lz; +#endif + + /* + * We can't be interrupted while we're setting up the MAS + * regusters or after we've confirmed that no tlb exists. + */ + local_irq_save(flags); + + if (unlikely(book3e_tlb_exists(ea, mm->context.id))) { + local_irq_restore(flags); + return; + } + +#ifdef CONFIG_PPC_FSL_BOOK3E + ncams = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY; + + /* We have to use the CAM(TLB1) on FSL parts for hugepages */ + index = __get_cpu_var(next_tlbcam_idx); + mtspr(SPRN_MAS0, MAS0_ESEL(index) | MAS0_TLBSEL(1)); + + /* Just round-robin the entries and wrap when we hit the end */ + if (unlikely(index == ncams - 1)) + __get_cpu_var(next_tlbcam_idx) = tlbcam_index; + else + __get_cpu_var(next_tlbcam_idx)++; +#endif + mas1 = MAS1_VALID | MAS1_TID(mm->context.id) | MAS1_TSIZE(tsize); + mas2 = ea & ~((1UL << shift) - 1); + mas2 |= (pte_val(pte) >> PTE_WIMGE_SHIFT) & MAS2_WIMGE_MASK; + mas7_3 = (u64)pte_pfn(pte) << PAGE_SHIFT; + mas7_3 |= (pte_val(pte) >> PTE_BAP_SHIFT) & MAS3_BAP_MASK; + if (!pte_dirty(pte)) + mas7_3 &= ~(MAS3_SW|MAS3_UW); + + mtspr(SPRN_MAS1, mas1); + mtspr(SPRN_MAS2, mas2); + + if (mmu_has_feature(MMU_FTR_USE_PAIRED_MAS)) { + mtspr(SPRN_MAS7_MAS3, mas7_3); + } else { + mtspr(SPRN_MAS7, upper_32_bits(mas7_3)); + mtspr(SPRN_MAS3, lower_32_bits(mas7_3)); + } + + asm volatile ("tlbwe"); + + local_irq_restore(flags); +} + +void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr) +{ + struct hstate *hstate = hstate_file(vma->vm_file); + unsigned long tsize = huge_page_shift(hstate) - 10; + + __flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, tsize, 0); + +} diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index da5eb3885702..5964371303ac 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -1,7 +1,8 @@ /* - * PPC64 (POWER4) Huge TLB Page Support for Kernel. + * PPC Huge TLB Page Support for Kernel. * * Copyright (C) 2003 David Gibson, IBM Corporation. + * Copyright (C) 2011 Becky Bruce, Freescale Semiconductor * * Based on the IA-32 version: * Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com> @@ -11,24 +12,39 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/hugetlb.h> +#include <linux/of_fdt.h> +#include <linux/memblock.h> +#include <linux/bootmem.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> #include <asm/tlb.h> +#include <asm/setup.h> #define PAGE_SHIFT_64K 16 #define PAGE_SHIFT_16M 24 #define PAGE_SHIFT_16G 34 -#define MAX_NUMBER_GPAGES 1024 +unsigned int HPAGE_SHIFT; -/* Tracks the 16G pages after the device tree is scanned and before the - * huge_boot_pages list is ready. */ -static unsigned long gpage_freearray[MAX_NUMBER_GPAGES]; +/* + * Tracks gpages after the device tree is scanned and before the + * huge_boot_pages list is ready. On 64-bit implementations, this is + * just used to track 16G pages and so is a single array. 32-bit + * implementations may have more than one gpage size due to limitations + * of the memory allocators, so we need multiple arrays + */ +#ifdef CONFIG_PPC64 +#define MAX_NUMBER_GPAGES 1024 +static u64 gpage_freearray[MAX_NUMBER_GPAGES]; static unsigned nr_gpages; - -/* Flag to mark huge PD pointers. This means pmd_bad() and pud_bad() - * will choke on pointers to hugepte tables, which is handy for - * catching screwups early. */ +#else +#define MAX_NUMBER_GPAGES 128 +struct psize_gpages { + u64 gpage_list[MAX_NUMBER_GPAGES]; + unsigned int nr_gpages; +}; +static struct psize_gpages gpage_freearray[MMU_PAGE_COUNT]; +#endif static inline int shift_to_mmu_psize(unsigned int shift) { @@ -49,25 +65,6 @@ static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize) #define hugepd_none(hpd) ((hpd).pd == 0) -static inline pte_t *hugepd_page(hugepd_t hpd) -{ - BUG_ON(!hugepd_ok(hpd)); - return (pte_t *)((hpd.pd & ~HUGEPD_SHIFT_MASK) | 0xc000000000000000); -} - -static inline unsigned int hugepd_shift(hugepd_t hpd) -{ - return hpd.pd & HUGEPD_SHIFT_MASK; -} - -static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr, unsigned pdshift) -{ - unsigned long idx = (addr & ((1UL << pdshift) - 1)) >> hugepd_shift(*hpdp); - pte_t *dir = hugepd_page(*hpdp); - - return dir + idx; -} - pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift) { pgd_t *pg; @@ -93,7 +90,7 @@ pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift if (is_hugepd(pm)) hpdp = (hugepd_t *)pm; else if (!pmd_none(*pm)) { - return pte_offset_map(pm, ea); + return pte_offset_kernel(pm, ea); } } } @@ -114,8 +111,18 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, unsigned long address, unsigned pdshift, unsigned pshift) { - pte_t *new = kmem_cache_zalloc(PGT_CACHE(pdshift - pshift), - GFP_KERNEL|__GFP_REPEAT); + struct kmem_cache *cachep; + pte_t *new; + +#ifdef CONFIG_PPC64 + cachep = PGT_CACHE(pdshift - pshift); +#else + int i; + int num_hugepd = 1 << (pshift - pdshift); + cachep = hugepte_cache; +#endif + + new = kmem_cache_zalloc(cachep, GFP_KERNEL|__GFP_REPEAT); BUG_ON(pshift > HUGEPD_SHIFT_MASK); BUG_ON((unsigned long)new & HUGEPD_SHIFT_MASK); @@ -124,10 +131,31 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, return -ENOMEM; spin_lock(&mm->page_table_lock); +#ifdef CONFIG_PPC64 if (!hugepd_none(*hpdp)) - kmem_cache_free(PGT_CACHE(pdshift - pshift), new); + kmem_cache_free(cachep, new); else - hpdp->pd = ((unsigned long)new & ~0x8000000000000000) | pshift; + hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift; +#else + /* + * We have multiple higher-level entries that point to the same + * actual pte location. Fill in each as we go and backtrack on error. + * We need all of these so the DTLB pgtable walk code can find the + * right higher-level entry without knowing if it's a hugepage or not. + */ + for (i = 0; i < num_hugepd; i++, hpdp++) { + if (unlikely(!hugepd_none(*hpdp))) + break; + else + hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift; + } + /* If we bailed from the for loop early, an error occurred, clean up */ + if (i < num_hugepd) { + for (i = i - 1 ; i >= 0; i--, hpdp--) + hpdp->pd = 0; + kmem_cache_free(cachep, new); + } +#endif spin_unlock(&mm->page_table_lock); return 0; } @@ -169,11 +197,132 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz return hugepte_offset(hpdp, addr, pdshift); } +#ifdef CONFIG_PPC32 /* Build list of addresses of gigantic pages. This function is used in early * boot before the buddy or bootmem allocator is setup. */ -void add_gpage(unsigned long addr, unsigned long page_size, - unsigned long number_of_pages) +void add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages) +{ + unsigned int idx = shift_to_mmu_psize(__ffs(page_size)); + int i; + + if (addr == 0) + return; + + gpage_freearray[idx].nr_gpages = number_of_pages; + + for (i = 0; i < number_of_pages; i++) { + gpage_freearray[idx].gpage_list[i] = addr; + addr += page_size; + } +} + +/* + * Moves the gigantic page addresses from the temporary list to the + * huge_boot_pages list. + */ +int alloc_bootmem_huge_page(struct hstate *hstate) +{ + struct huge_bootmem_page *m; + int idx = shift_to_mmu_psize(hstate->order + PAGE_SHIFT); + int nr_gpages = gpage_freearray[idx].nr_gpages; + + if (nr_gpages == 0) + return 0; + +#ifdef CONFIG_HIGHMEM + /* + * If gpages can be in highmem we can't use the trick of storing the + * data structure in the page; allocate space for this + */ + m = alloc_bootmem(sizeof(struct huge_bootmem_page)); + m->phys = gpage_freearray[idx].gpage_list[--nr_gpages]; +#else + m = phys_to_virt(gpage_freearray[idx].gpage_list[--nr_gpages]); +#endif + + list_add(&m->list, &huge_boot_pages); + gpage_freearray[idx].nr_gpages = nr_gpages; + gpage_freearray[idx].gpage_list[nr_gpages] = 0; + m->hstate = hstate; + + return 1; +} +/* + * Scan the command line hugepagesz= options for gigantic pages; store those in + * a list that we use to allocate the memory once all options are parsed. + */ + +unsigned long gpage_npages[MMU_PAGE_COUNT]; + +static int __init do_gpage_early_setup(char *param, char *val) +{ + static phys_addr_t size; + unsigned long npages; + + /* + * The hugepagesz and hugepages cmdline options are interleaved. We + * use the size variable to keep track of whether or not this was done + * properly and skip over instances where it is incorrect. Other + * command-line parsing code will issue warnings, so we don't need to. + * + */ + if ((strcmp(param, "default_hugepagesz") == 0) || + (strcmp(param, "hugepagesz") == 0)) { + size = memparse(val, NULL); + } else if (strcmp(param, "hugepages") == 0) { + if (size != 0) { + if (sscanf(val, "%lu", &npages) <= 0) + npages = 0; + gpage_npages[shift_to_mmu_psize(__ffs(size))] = npages; + size = 0; + } + } + return 0; +} + + +/* + * This function allocates physical space for pages that are larger than the + * buddy allocator can handle. We want to allocate these in highmem because + * the amount of lowmem is limited. This means that this function MUST be + * called before lowmem_end_addr is set up in MMU_init() in order for the lmb + * allocate to grab highmem. + */ +void __init reserve_hugetlb_gpages(void) +{ + static __initdata char cmdline[COMMAND_LINE_SIZE]; + phys_addr_t size, base; + int i; + + strlcpy(cmdline, boot_command_line, COMMAND_LINE_SIZE); + parse_args("hugetlb gpages", cmdline, NULL, 0, &do_gpage_early_setup); + + /* + * Walk gpage list in reverse, allocating larger page sizes first. + * Skip over unsupported sizes, or sizes that have 0 gpages allocated. + * When we reach the point in the list where pages are no longer + * considered gpages, we're done. + */ + for (i = MMU_PAGE_COUNT-1; i >= 0; i--) { + if (mmu_psize_defs[i].shift == 0 || gpage_npages[i] == 0) + continue; + else if (mmu_psize_to_shift(i) < (MAX_ORDER + PAGE_SHIFT)) + break; + + size = (phys_addr_t)(1ULL << mmu_psize_to_shift(i)); + base = memblock_alloc_base(size * gpage_npages[i], size, + MEMBLOCK_ALLOC_ANYWHERE); + add_gpage(base, size, gpage_npages[i]); + } +} + +#else /* PPC64 */ + +/* Build list of addresses of gigantic pages. This function is used in early + * boot before the buddy or bootmem allocator is setup. + */ +void add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages) { if (!addr) return; @@ -199,19 +348,79 @@ int alloc_bootmem_huge_page(struct hstate *hstate) m->hstate = hstate; return 1; } +#endif int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep) { return 0; } +#ifdef CONFIG_PPC32 +#define HUGEPD_FREELIST_SIZE \ + ((PAGE_SIZE - sizeof(struct hugepd_freelist)) / sizeof(pte_t)) + +struct hugepd_freelist { + struct rcu_head rcu; + unsigned int index; + void *ptes[0]; +}; + +static DEFINE_PER_CPU(struct hugepd_freelist *, hugepd_freelist_cur); + +static void hugepd_free_rcu_callback(struct rcu_head *head) +{ + struct hugepd_freelist *batch = + container_of(head, struct hugepd_freelist, rcu); + unsigned int i; + + for (i = 0; i < batch->index; i++) + kmem_cache_free(hugepte_cache, batch->ptes[i]); + + free_page((unsigned long)batch); +} + +static void hugepd_free(struct mmu_gather *tlb, void *hugepte) +{ + struct hugepd_freelist **batchp; + + batchp = &__get_cpu_var(hugepd_freelist_cur); + + if (atomic_read(&tlb->mm->mm_users) < 2 || + cpumask_equal(mm_cpumask(tlb->mm), + cpumask_of(smp_processor_id()))) { + kmem_cache_free(hugepte_cache, hugepte); + return; + } + + if (*batchp == NULL) { + *batchp = (struct hugepd_freelist *)__get_free_page(GFP_ATOMIC); + (*batchp)->index = 0; + } + + (*batchp)->ptes[(*batchp)->index++] = hugepte; + if ((*batchp)->index == HUGEPD_FREELIST_SIZE) { + call_rcu_sched(&(*batchp)->rcu, hugepd_free_rcu_callback); + *batchp = NULL; + } +} +#endif + static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshift, unsigned long start, unsigned long end, unsigned long floor, unsigned long ceiling) { pte_t *hugepte = hugepd_page(*hpdp); - unsigned shift = hugepd_shift(*hpdp); + int i; + unsigned long pdmask = ~((1UL << pdshift) - 1); + unsigned int num_hugepd = 1; + +#ifdef CONFIG_PPC64 + unsigned int shift = hugepd_shift(*hpdp); +#else + /* Note: On 32-bit the hpdp may be the first of several */ + num_hugepd = (1 << (hugepd_shift(*hpdp) - pdshift)); +#endif start &= pdmask; if (start < floor) @@ -224,9 +433,15 @@ static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshif if (end - 1 > ceiling - 1) return; - hpdp->pd = 0; + for (i = 0; i < num_hugepd; i++, hpdp++) + hpdp->pd = 0; + tlb->need_flush = 1; +#ifdef CONFIG_PPC64 pgtable_free_tlb(tlb, hugepte, pdshift - shift); +#else + hugepd_free(tlb, hugepte); +#endif } static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud, @@ -331,18 +546,27 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb, * too. */ - pgd = pgd_offset(tlb->mm, addr); do { next = pgd_addr_end(addr, end); + pgd = pgd_offset(tlb->mm, addr); if (!is_hugepd(pgd)) { if (pgd_none_or_clear_bad(pgd)) continue; hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling); } else { +#ifdef CONFIG_PPC32 + /* + * Increment next by the size of the huge mapping since + * on 32-bit there may be more than one entry at the pgd + * level for a single hugepage, but all of them point to + * the same kmem cache that holds the hugepte. + */ + next = addr + (1 << hugepd_shift(*(hugepd_t *)pgd)); +#endif free_hugepd_range(tlb, (hugepd_t *)pgd, PGDIR_SHIFT, addr, next, floor, ceiling); } - } while (pgd++, addr = next, addr != end); + } while (addr = next, addr != end); } struct page * @@ -477,17 +701,35 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags) { +#ifdef CONFIG_PPC_MM_SLICES struct hstate *hstate = hstate_file(file); int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate)); return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0); +#else + return get_unmapped_area(file, addr, len, pgoff, flags); +#endif } unsigned long vma_mmu_pagesize(struct vm_area_struct *vma) { +#ifdef CONFIG_PPC_MM_SLICES unsigned int psize = get_slice_psize(vma->vm_mm, vma->vm_start); return 1UL << mmu_psize_to_shift(psize); +#else + if (!is_vm_hugetlb_page(vma)) + return PAGE_SIZE; + + return huge_page_size(hstate_vma(vma)); +#endif +} + +static inline bool is_power_of_4(unsigned long x) +{ + if (is_power_of_2(x)) + return (__ilog2(x) % 2) ? false : true; + return false; } static int __init add_huge_page_size(unsigned long long size) @@ -497,9 +739,14 @@ static int __init add_huge_page_size(unsigned long long size) /* Check that it is a page size supported by the hardware and * that it fits within pagetable and slice limits. */ +#ifdef CONFIG_PPC_FSL_BOOK3E + if ((size < PAGE_SIZE) || !is_power_of_4(size)) + return -EINVAL; +#else if (!is_power_of_2(size) || (shift > SLICE_HIGH_SHIFT) || (shift <= PAGE_SHIFT)) return -EINVAL; +#endif if ((mmu_psize = shift_to_mmu_psize(shift)) < 0) return -EINVAL; @@ -536,6 +783,46 @@ static int __init hugepage_setup_sz(char *str) } __setup("hugepagesz=", hugepage_setup_sz); +#ifdef CONFIG_FSL_BOOKE +struct kmem_cache *hugepte_cache; +static int __init hugetlbpage_init(void) +{ + int psize; + + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { + unsigned shift; + + if (!mmu_psize_defs[psize].shift) + continue; + + shift = mmu_psize_to_shift(psize); + + /* Don't treat normal page sizes as huge... */ + if (shift != PAGE_SHIFT) + if (add_huge_page_size(1ULL << shift) < 0) + continue; + } + + /* + * Create a kmem cache for hugeptes. The bottom bits in the pte have + * size information encoded in them, so align them to allow this + */ + hugepte_cache = kmem_cache_create("hugepte-cache", sizeof(pte_t), + HUGEPD_SHIFT_MASK + 1, 0, NULL); + if (hugepte_cache == NULL) + panic("%s: Unable to create kmem cache for hugeptes\n", + __func__); + + /* Default hpage size = 4M */ + if (mmu_psize_defs[MMU_PAGE_4M].shift) + HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_4M].shift; + else + panic("%s: Unable to set default huge page size\n", __func__); + + + return 0; +} +#else static int __init hugetlbpage_init(void) { int psize; @@ -578,15 +865,23 @@ static int __init hugetlbpage_init(void) return 0; } - +#endif module_init(hugetlbpage_init); void flush_dcache_icache_hugepage(struct page *page) { int i; + void *start; BUG_ON(!PageCompound(page)); - for (i = 0; i < (1UL << compound_order(page)); i++) - __flush_dcache_icache(page_address(page+i)); + for (i = 0; i < (1UL << compound_order(page)); i++) { + if (!PageHighMem(page)) { + __flush_dcache_icache(page_address(page+i)); + } else { + start = kmap_atomic(page+i, KM_PPC_SYNC_ICACHE); + __flush_dcache_icache(start); + kunmap_atomic(start, KM_PPC_SYNC_ICACHE); + } + } } diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index c77fef56dad6..161cefde5c15 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -32,6 +32,8 @@ #include <linux/pagemap.h> #include <linux/memblock.h> #include <linux/gfp.h> +#include <linux/slab.h> +#include <linux/hugetlb.h> #include <asm/pgalloc.h> #include <asm/prom.h> @@ -44,6 +46,7 @@ #include <asm/tlb.h> #include <asm/sections.h> #include <asm/system.h> +#include <asm/hugetlb.h> #include "mmu_decl.h" @@ -123,6 +126,12 @@ void __init MMU_init(void) /* parse args from command line */ MMU_setup(); + /* + * Reserve gigantic pages for hugetlb. This MUST occur before + * lowmem_end_addr is initialized below. + */ + reserve_hugetlb_gpages(); + if (memblock.memory.cnt > 1) { #ifndef CONFIG_WII memblock.memory.cnt = 1; diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index c781bbcf7338..5db316cad47b 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -123,7 +123,8 @@ int arch_add_memory(int nid, u64 start, u64 size) pgdata = NODE_DATA(nid); start = (unsigned long)__va(start); - create_section_mapping(start, start + size); + if (create_section_mapping(start, start + size)) + return -EINVAL; /* this should work for most non-highmem platforms */ zone = pgdata->node_zones; @@ -548,4 +549,9 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, return; hash_preload(vma->vm_mm, address, access, trap); #endif /* CONFIG_PPC_STD_MMU */ +#if (defined(CONFIG_PPC_BOOK3E_64) || defined(CONFIG_PPC_FSL_BOOK3E)) \ + && defined(CONFIG_HUGETLB_PAGE) + if (is_vm_hugetlb_page(vma)) + book3e_hugetlb_preload(vma->vm_mm, address, *ptep); +#endif } diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c index 3bafc3deca6d..4ff587e38250 100644 --- a/arch/powerpc/mm/mmu_context_hash64.c +++ b/arch/powerpc/mm/mmu_context_hash64.c @@ -136,8 +136,8 @@ int use_cop(unsigned long acop, struct mm_struct *mm) if (!mm || !acop) return -EINVAL; - /* We need to make sure mm_users doesn't change */ - down_read(&mm->mmap_sem); + /* The page_table_lock ensures mm_users won't change under us */ + spin_lock(&mm->page_table_lock); spin_lock(mm->context.cop_lockp); if (mm->context.cop_pid == COP_PID_NONE) { @@ -164,7 +164,7 @@ int use_cop(unsigned long acop, struct mm_struct *mm) out: spin_unlock(mm->context.cop_lockp); - up_read(&mm->mmap_sem); + spin_unlock(&mm->page_table_lock); return ret; } @@ -185,8 +185,8 @@ void drop_cop(unsigned long acop, struct mm_struct *mm) if (WARN_ON_ONCE(!mm)) return; - /* We need to make sure mm_users doesn't change */ - down_read(&mm->mmap_sem); + /* The page_table_lock ensures mm_users won't change under us */ + spin_lock(&mm->page_table_lock); spin_lock(mm->context.cop_lockp); mm->context.acop &= ~acop; @@ -213,7 +213,7 @@ void drop_cop(unsigned long acop, struct mm_struct *mm) } spin_unlock(mm->context.cop_lockp); - up_read(&mm->mmap_sem); + spin_unlock(&mm->page_table_lock); } EXPORT_SYMBOL_GPL(drop_cop); diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index 336807de550e..5b63bd3da4a9 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -292,6 +292,11 @@ int init_new_context(struct task_struct *t, struct mm_struct *mm) mm->context.id = MMU_NO_CONTEXT; mm->context.active = 0; +#ifdef CONFIG_PPC_MM_SLICES + if (slice_mm_new_context(mm)) + slice_set_user_psize(mm, mmu_virtual_psize); +#endif + return 0; } diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index dd0a2589591d..83eb5d5f53d5 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -142,6 +142,8 @@ extern unsigned long mmu_mapin_ram(unsigned long top); #elif defined(CONFIG_PPC_FSL_BOOK3E) extern unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx); +extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt, + phys_addr_t phys); #ifdef CONFIG_PPC32 extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(unsigned long top); diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 2164006fe170..0bfb90c50571 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -709,8 +709,7 @@ static void __init parse_drconf_memory(struct device_node *memory) static int __init parse_numa_properties(void) { - struct device_node *cpu = NULL; - struct device_node *memory = NULL; + struct device_node *memory; int default_nid = 0; unsigned long i; @@ -732,6 +731,7 @@ static int __init parse_numa_properties(void) * each node to be onlined must have NODE_DATA etc backing it. */ for_each_present_cpu(i) { + struct device_node *cpu; int nid; cpu = of_get_cpu_node(i, NULL); @@ -750,8 +750,8 @@ static int __init parse_numa_properties(void) } get_n_mem_cells(&n_mem_addr_cells, &n_mem_size_cells); - memory = NULL; - while ((memory = of_find_node_by_type(memory, "memory")) != NULL) { + + for_each_node_by_type(memory, "memory") { unsigned long start; unsigned long size; int nid; @@ -800,8 +800,9 @@ new_range: } /* - * Now do the same thing for each MEMBLOCK listed in the ibm,dynamic-memory - * property in the ibm,dynamic-reconfiguration-memory node. + * Now do the same thing for each MEMBLOCK listed in the + * ibm,dynamic-memory property in the + * ibm,dynamic-reconfiguration-memory node. */ memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory"); if (memory) @@ -1187,10 +1188,10 @@ static int hot_add_drconf_scn_to_nid(struct device_node *memory, */ int hot_add_node_scn_to_nid(unsigned long scn_addr) { - struct device_node *memory = NULL; + struct device_node *memory; int nid = -1; - while ((memory = of_find_node_by_type(memory, "memory")) != NULL) { + for_each_node_by_type(memory, "memory") { unsigned long start, size; int ranges; const unsigned int *memcell_buf; @@ -1214,11 +1215,12 @@ int hot_add_node_scn_to_nid(unsigned long scn_addr) break; } - of_node_put(memory); if (nid >= 0) break; } + of_node_put(memory); + return nid; } diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index af40c8768a78..214130a4edc6 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -27,6 +27,7 @@ #include <linux/init.h> #include <linux/percpu.h> #include <linux/hardirq.h> +#include <linux/hugetlb.h> #include <asm/pgalloc.h> #include <asm/tlbflush.h> #include <asm/tlb.h> @@ -212,7 +213,7 @@ int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address, entry = set_access_flags_filter(entry, vma, dirty); changed = !pte_same(*(ptep), entry); if (changed) { - if (!(vma->vm_flags & VM_HUGETLB)) + if (!is_vm_hugetlb_page(vma)) assert_pte_locked(vma->vm_mm, address); __ptep_set_access_flags(ptep, entry); flush_tlb_page_nohash(vma, address); diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S index 4ebb34bc01d6..dc4a5f385e41 100644 --- a/arch/powerpc/mm/tlb_low_64e.S +++ b/arch/powerpc/mm/tlb_low_64e.S @@ -553,24 +553,24 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV) rldicl r11,r16,64-VPTE_PGD_SHIFT,64-PGD_INDEX_SIZE-3 clrrdi r10,r11,3 ldx r15,r10,r15 - cmpldi cr0,r15,0 - beq virt_page_table_tlb_miss_fault + cmpdi cr0,r15,0 + bge virt_page_table_tlb_miss_fault #ifndef CONFIG_PPC_64K_PAGES /* Get to PUD entry */ rldicl r11,r16,64-VPTE_PUD_SHIFT,64-PUD_INDEX_SIZE-3 clrrdi r10,r11,3 ldx r15,r10,r15 - cmpldi cr0,r15,0 - beq virt_page_table_tlb_miss_fault + cmpdi cr0,r15,0 + bge virt_page_table_tlb_miss_fault #endif /* CONFIG_PPC_64K_PAGES */ /* Get to PMD entry */ rldicl r11,r16,64-VPTE_PMD_SHIFT,64-PMD_INDEX_SIZE-3 clrrdi r10,r11,3 ldx r15,r10,r15 - cmpldi cr0,r15,0 - beq virt_page_table_tlb_miss_fault + cmpdi cr0,r15,0 + bge virt_page_table_tlb_miss_fault /* Ok, we're all right, we can now create a kernel translation for * a 4K or 64K page from r16 -> r15. @@ -802,24 +802,24 @@ htw_tlb_miss: rldicl r11,r16,64-(PGDIR_SHIFT-3),64-PGD_INDEX_SIZE-3 clrrdi r10,r11,3 ldx r15,r10,r15 - cmpldi cr0,r15,0 - beq htw_tlb_miss_fault + cmpdi cr0,r15,0 + bge htw_tlb_miss_fault #ifndef CONFIG_PPC_64K_PAGES /* Get to PUD entry */ rldicl r11,r16,64-(PUD_SHIFT-3),64-PUD_INDEX_SIZE-3 clrrdi r10,r11,3 ldx r15,r10,r15 - cmpldi cr0,r15,0 - beq htw_tlb_miss_fault + cmpdi cr0,r15,0 + bge htw_tlb_miss_fault #endif /* CONFIG_PPC_64K_PAGES */ /* Get to PMD entry */ rldicl r11,r16,64-(PMD_SHIFT-3),64-PMD_INDEX_SIZE-3 clrrdi r10,r11,3 ldx r15,r10,r15 - cmpldi cr0,r15,0 - beq htw_tlb_miss_fault + cmpdi cr0,r15,0 + bge htw_tlb_miss_fault /* Ok, we're all right, we can now create an indirect entry for * a 1M or 256M page. diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index d32ec643c231..6c2eabf707b7 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -36,14 +36,49 @@ #include <linux/spinlock.h> #include <linux/memblock.h> #include <linux/of_fdt.h> +#include <linux/hugetlb.h> #include <asm/tlbflush.h> #include <asm/tlb.h> #include <asm/code-patching.h> +#include <asm/hugetlb.h> #include "mmu_decl.h" -#ifdef CONFIG_PPC_BOOK3E +/* + * This struct lists the sw-supported page sizes. The hardawre MMU may support + * other sizes not listed here. The .ind field is only used on MMUs that have + * indirect page table entries. + */ +#ifdef CONFIG_PPC_BOOK3E_MMU +#ifdef CONFIG_FSL_BOOKE +struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { + [MMU_PAGE_4K] = { + .shift = 12, + .enc = BOOK3E_PAGESZ_4K, + }, + [MMU_PAGE_4M] = { + .shift = 22, + .enc = BOOK3E_PAGESZ_4M, + }, + [MMU_PAGE_16M] = { + .shift = 24, + .enc = BOOK3E_PAGESZ_16M, + }, + [MMU_PAGE_64M] = { + .shift = 26, + .enc = BOOK3E_PAGESZ_64M, + }, + [MMU_PAGE_256M] = { + .shift = 28, + .enc = BOOK3E_PAGESZ_256M, + }, + [MMU_PAGE_1G] = { + .shift = 30, + .enc = BOOK3E_PAGESZ_1GB, + }, +}; +#else struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { [MMU_PAGE_4K] = { .shift = 12, @@ -77,6 +112,8 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { .enc = BOOK3E_PAGESZ_1GB, }, }; +#endif /* CONFIG_FSL_BOOKE */ + static inline int mmu_get_tsize(int psize) { return mmu_psize_defs[psize].enc; @@ -87,7 +124,7 @@ static inline int mmu_get_tsize(int psize) /* This isn't used on !Book3E for now */ return 0; } -#endif +#endif /* CONFIG_PPC_BOOK3E_MMU */ /* The variables below are currently only used on 64-bit Book3E * though this will probably be made common with other nohash @@ -266,6 +303,11 @@ void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) { +#ifdef CONFIG_HUGETLB_PAGE + if (is_vm_hugetlb_page(vma)) + flush_hugetlb_page(vma, vmaddr); +#endif + __flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, mmu_get_tsize(mmu_virtual_psize), 0); } @@ -600,13 +642,28 @@ void __cpuinit early_init_mmu_secondary(void) void setup_initial_memory_limit(phys_addr_t first_memblock_base, phys_addr_t first_memblock_size) { - /* On Embedded 64-bit, we adjust the RMA size to match + /* On non-FSL Embedded 64-bit, we adjust the RMA size to match * the bolted TLB entry. We know for now that only 1G * entries are supported though that may eventually - * change. We crop it to the size of the first MEMBLOCK to + * change. + * + * on FSL Embedded 64-bit, we adjust the RMA size to match the + * first bolted TLB entry size. We still limit max to 1G even if + * the TLB could cover more. This is due to what the early init + * code is setup to do. + * + * We crop it to the size of the first MEMBLOCK to * avoid going over total available memory just in case... */ - ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000); +#ifdef CONFIG_PPC_FSL_BOOK3E + if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) { + unsigned long linear_sz; + linear_sz = calc_cam_sz(first_memblock_size, PAGE_OFFSET, + first_memblock_base); + ppc64_rma_size = min_t(u64, linear_sz, 0x40000000); + } else +#endif + ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000); /* Finally limit subsequent allocations */ memblock_set_current_limit(first_memblock_base + ppc64_rma_size); diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index b5d87067a58b..8f9c3e245cff 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -32,14 +32,6 @@ config EP405 help This option enables support for the EP405/EP405PC boards. -config HCU4 - bool "Hcu4" - depends on 40x - default n - select 405GPR - help - This option enables support for the Nestal Maschinen HCU4 board. - config HOTFOOT bool "Hotfoot" depends on 40x diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile index 56e89004c468..88c22de0c850 100644 --- a/arch/powerpc/platforms/40x/Makefile +++ b/arch/powerpc/platforms/40x/Makefile @@ -1,4 +1,3 @@ -obj-$(CONFIG_HCU4) += hcu4.o obj-$(CONFIG_WALNUT) += walnut.o obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD) += virtex.o obj-$(CONFIG_EP405) += ep405.o diff --git a/arch/powerpc/platforms/40x/hcu4.c b/arch/powerpc/platforms/40x/hcu4.c deleted file mode 100644 index 60b2afecab75..000000000000 --- a/arch/powerpc/platforms/40x/hcu4.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Architecture- / platform-specific boot-time initialization code for - * IBM PowerPC 4xx based boards. Adapted from original - * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek - * <dan@net4x.com>. - * - * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu> - * - * Rewritten and ported to the merged powerpc tree: - * Copyright 2007 IBM Corporation - * Josh Boyer <jwboyer@linux.vnet.ibm.com> - * - * 2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/init.h> -#include <linux/of_platform.h> - -#include <asm/machdep.h> -#include <asm/prom.h> -#include <asm/udbg.h> -#include <asm/time.h> -#include <asm/uic.h> -#include <asm/ppc4xx.h> - -static __initdata struct of_device_id hcu4_of_bus[] = { - { .compatible = "ibm,plb3", }, - { .compatible = "ibm,opb", }, - { .compatible = "ibm,ebc", }, - {}, -}; - -static int __init hcu4_device_probe(void) -{ - of_platform_bus_probe(NULL, hcu4_of_bus, NULL); - return 0; -} -machine_device_initcall(hcu4, hcu4_device_probe); - -static int __init hcu4_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (!of_flat_dt_is_compatible(root, "netstal,hcu4")) - return 0; - - return 1; -} - -define_machine(hcu4) { - .name = "HCU4", - .probe = hcu4_probe, - .progress = udbg_progress, - .init_IRQ = uic_init_tree, - .get_irq = uic_get_irq, - .restart = ppc4xx_reset_system, - .calibrate_decr = generic_calibrate_decr, -}; diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index 27b0651221d1..b3ebce1aec07 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig @@ -6,6 +6,7 @@ config PPC_MPC512x select PPC_CLOCK select PPC_PCI_CHOICE select FSL_PCI if PCI + select ARCH_WANT_OPTIONAL_GPIOLIB config MPC5121_ADS bool "Freescale MPC5121E ADS" diff --git a/arch/powerpc/platforms/82xx/km82xx.c b/arch/powerpc/platforms/82xx/km82xx.c index 428c5e0a0e75..3661bcdc326a 100644 --- a/arch/powerpc/platforms/82xx/km82xx.c +++ b/arch/powerpc/platforms/82xx/km82xx.c @@ -49,6 +49,9 @@ struct cpm_pin { }; static __initdata struct cpm_pin km82xx_pins[] = { + /* SMC1 */ + {2, 4, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* SMC2 */ {0, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, @@ -137,6 +140,7 @@ static void __init init_ioports(void) } cpm2_smc_clk_setup(CPM_CLK_SMC2, CPM_BRG8); + cpm2_smc_clk_setup(CPM_CLK_SMC1, CPM_BRG7); cpm2_clk_setup(CPM_CLK_SCC1, CPM_CLK11, CPM_CLK_RX); cpm2_clk_setup(CPM_CLK_SCC1, CPM_CLK11, CPM_CLK_TX); cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_RTX); diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 73f4135f3a1a..670a033264c0 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -114,18 +114,21 @@ config KMETER1 endif -# used for usb +# used for usb & gpio config PPC_MPC831x bool + select ARCH_WANT_OPTIONAL_GPIOLIB # used for math-emu config PPC_MPC832x bool -# used for usb +# used for usb & gpio config PPC_MPC834x bool + select ARCH_WANT_OPTIONAL_GPIOLIB -# used for usb +# used for usb & gpio config PPC_MPC837x bool + select ARCH_WANT_OPTIONAL_GPIOLIB diff --git a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c index 70798ac911ef..ef6537b8ed33 100644 --- a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c +++ b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c @@ -21,6 +21,8 @@ #include <linux/of.h> #include <linux/of_gpio.h> #include <linux/slab.h> +#include <linux/kthread.h> +#include <linux/reboot.h> #include <asm/prom.h> #include <asm/machdep.h> @@ -30,6 +32,7 @@ */ #define MCU_REG_CTRL 0x20 #define MCU_CTRL_POFF 0x40 +#define MCU_CTRL_BTN 0x80 #define MCU_NUM_GPIO 2 @@ -42,13 +45,55 @@ struct mcu { static struct mcu *glob_mcu; +struct task_struct *shutdown_thread; +static int shutdown_thread_fn(void *data) +{ + int ret; + struct mcu *mcu = glob_mcu; + + while (!kthread_should_stop()) { + ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL); + if (ret < 0) + pr_err("MCU status reg read failed.\n"); + mcu->reg_ctrl = ret; + + + if (mcu->reg_ctrl & MCU_CTRL_BTN) { + i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, + mcu->reg_ctrl & ~MCU_CTRL_BTN); + + ctrl_alt_del(); + } + + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(HZ); + } + + return 0; +} + +static ssize_t show_status(struct device *d, + struct device_attribute *attr, char *buf) +{ + int ret; + struct mcu *mcu = glob_mcu; + + ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL); + if (ret < 0) + return -ENODEV; + mcu->reg_ctrl = ret; + + return sprintf(buf, "%02x\n", ret); +} +static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); + static void mcu_power_off(void) { struct mcu *mcu = glob_mcu; pr_info("Sending power-off request to the MCU...\n"); mutex_lock(&mcu->lock); - i2c_smbus_write_byte_data(glob_mcu->client, MCU_REG_CTRL, + i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, mcu->reg_ctrl | MCU_CTRL_POFF); mutex_unlock(&mcu->lock); } @@ -130,6 +175,13 @@ static int __devinit mcu_probe(struct i2c_client *client, dev_info(&client->dev, "will provide power-off service\n"); } + if (device_create_file(&client->dev, &dev_attr_status)) + dev_err(&client->dev, + "couldn't create device file for status\n"); + + shutdown_thread = kthread_run(shutdown_thread_fn, NULL, + "mcu-i2c-shdn"); + return 0; err: kfree(mcu); @@ -141,6 +193,10 @@ static int __devexit mcu_remove(struct i2c_client *client) struct mcu *mcu = i2c_get_clientdata(client); int ret; + kthread_stop(shutdown_thread); + + device_remove_file(&client->dev, &dev_attr_status); + if (glob_mcu == mcu) { ppc_md.power_off = NULL; glob_mcu = NULL; diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 12f5932dadc9..45023e26aea3 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -171,17 +171,18 @@ config SBC8560 help This option enables support for the Wind River SBC8560 board -config P2040_RDB - bool "Freescale P2040 RDB" +config P2041_RDB + bool "Freescale P2041 RDB" select DEFAULT_UIMAGE select PPC_E500MC select PHYS_64BIT select SWIOTLB - select MPC8xxx_GPIO + select ARCH_REQUIRE_GPIOLIB + select GPIO_MPC8XXX select HAS_RAPIDIO select PPC_EPAPR_HV_PIC help - This option enables support for the P2040 RDB board + This option enables support for the P2041 RDB board config P3041_DS bool "Freescale P3041 DS" @@ -189,19 +190,33 @@ config P3041_DS select PPC_E500MC select PHYS_64BIT select SWIOTLB - select MPC8xxx_GPIO + select ARCH_REQUIRE_GPIOLIB + select GPIO_MPC8XXX select HAS_RAPIDIO select PPC_EPAPR_HV_PIC help This option enables support for the P3041 DS board +config P3060_QDS + bool "Freescale P3060 QDS" + select DEFAULT_UIMAGE + select PPC_E500MC + select PHYS_64BIT + select SWIOTLB + select MPC8xxx_GPIO + select HAS_RAPIDIO + select PPC_EPAPR_HV_PIC + help + This option enables support for the P3060 QDS board + config P4080_DS bool "Freescale P4080 DS" select DEFAULT_UIMAGE select PPC_E500MC select PHYS_64BIT select SWIOTLB - select MPC8xxx_GPIO + select ARCH_REQUIRE_GPIOLIB + select GPIO_MPC8XXX select HAS_RAPIDIO select PPC_EPAPR_HV_PIC help @@ -216,7 +231,8 @@ config P5020_DS select PPC_E500MC select PHYS_64BIT select SWIOTLB - select MPC8xxx_GPIO + select ARCH_REQUIRE_GPIOLIB + select GPIO_MPC8XXX select HAS_RAPIDIO select PPC_EPAPR_HV_PIC help diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index a971b32c5c0a..bc5acb95917a 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -13,8 +13,9 @@ obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o obj-$(CONFIG_P1010_RDB) += p1010rdb.o obj-$(CONFIG_P1022_DS) += p1022_ds.o obj-$(CONFIG_P1023_RDS) += p1023_rds.o -obj-$(CONFIG_P2040_RDB) += p2040_rdb.o corenet_ds.o +obj-$(CONFIG_P2041_RDB) += p2041_rdb.o corenet_ds.o obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o +obj-$(CONFIG_P3060_QDS) += p3060_qds.o corenet_ds.o obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o obj-$(CONFIG_STX_GP3) += stx_gp3.o diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index c01c7277888c..fda15716fada 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -129,17 +129,20 @@ static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port, */ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port) { - struct device_node *pixis_node; + struct device_node *np; void __iomem *pixis; u8 __iomem *brdcfg1; - pixis_node = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis"); - if (!pixis_node) { + np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-fpga"); + if (!np) + /* older device trees used "fsl,p1022ds-pixis" */ + np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis"); + if (!np) { pr_err("p1022ds: missing ngPIXIS node\n"); return; } - pixis = of_iomap(pixis_node, 0); + pixis = of_iomap(np, 0); if (!pixis) { pr_err("p1022ds: could not map ngPIXIS registers\n"); return; diff --git a/arch/powerpc/platforms/85xx/p2040_rdb.c b/arch/powerpc/platforms/85xx/p2041_rdb.c index 32b56ac73dfb..eda6ed5683e1 100644 --- a/arch/powerpc/platforms/85xx/p2040_rdb.c +++ b/arch/powerpc/platforms/85xx/p2041_rdb.c @@ -1,5 +1,5 @@ /* - * P2040 RDB Setup + * P2041 RDB Setup * * Copyright 2011 Freescale Semiconductor Inc. * @@ -35,18 +35,18 @@ /* * Called very early, device-tree isn't unflattened */ -static int __init p2040_rdb_probe(void) +static int __init p2041_rdb_probe(void) { unsigned long root = of_get_flat_dt_root(); #ifdef CONFIG_SMP extern struct smp_ops_t smp_85xx_ops; #endif - if (of_flat_dt_is_compatible(root, "fsl,P2040RDB")) + if (of_flat_dt_is_compatible(root, "fsl,P2041RDB")) return 1; /* Check if we're running under the Freescale hypervisor */ - if (of_flat_dt_is_compatible(root, "fsl,P2040RDB-hv")) { + if (of_flat_dt_is_compatible(root, "fsl,P2041RDB-hv")) { ppc_md.init_IRQ = ehv_pic_init; ppc_md.get_irq = ehv_pic_get_irq; ppc_md.restart = fsl_hv_restart; @@ -66,9 +66,9 @@ static int __init p2040_rdb_probe(void) return 0; } -define_machine(p2040_rdb) { - .name = "P2040 RDB", - .probe = p2040_rdb_probe, +define_machine(p2041_rdb) { + .name = "P2041 RDB", + .probe = p2041_rdb_probe, .setup_arch = corenet_ds_setup_arch, .init_IRQ = corenet_ds_pic_init, #ifdef CONFIG_PCI @@ -81,8 +81,8 @@ define_machine(p2040_rdb) { .power_save = e500_idle, }; -machine_device_initcall(p2040_rdb, corenet_ds_publish_devices); +machine_device_initcall(p2041_rdb, corenet_ds_publish_devices); #ifdef CONFIG_SWIOTLB -machine_arch_initcall(p2040_rdb, swiotlb_setup_bus_notifier); +machine_arch_initcall(p2041_rdb, swiotlb_setup_bus_notifier); #endif diff --git a/arch/powerpc/platforms/85xx/p3060_qds.c b/arch/powerpc/platforms/85xx/p3060_qds.c new file mode 100644 index 000000000000..01dcf44871e9 --- /dev/null +++ b/arch/powerpc/platforms/85xx/p3060_qds.c @@ -0,0 +1,77 @@ +/* + * P3060 QDS Setup + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/phy.h> +#include <asm/machdep.h> +#include <asm/udbg.h> +#include <asm/mpic.h> +#include <linux/of_platform.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include <asm/ehv_pic.h> +#include "corenet_ds.h" + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init p3060_qds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); +#ifdef CONFIG_SMP + extern struct smp_ops_t smp_85xx_ops; +#endif + + if (of_flat_dt_is_compatible(root, "fsl,P3060QDS")) + return 1; + + /* Check if we're running under the Freescale hypervisor */ + if (of_flat_dt_is_compatible(root, "fsl,P3060QDS-hv")) { + ppc_md.init_IRQ = ehv_pic_init; + ppc_md.get_irq = ehv_pic_get_irq; + ppc_md.restart = fsl_hv_restart; + ppc_md.power_off = fsl_hv_halt; + ppc_md.halt = fsl_hv_halt; +#ifdef CONFIG_SMP + /* + * Disable the timebase sync operations because we can't write + * to the timebase registers under the hypervisor. + */ + smp_85xx_ops.give_timebase = NULL; + smp_85xx_ops.take_timebase = NULL; +#endif + return 1; + } + + return 0; +} + +define_machine(p3060_qds) { + .name = "P3060 QDS", + .probe = p3060_qds_probe, + .setup_arch = corenet_ds_setup_arch, + .init_IRQ = corenet_ds_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_coreint_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, + .power_save = e500_idle, +}; + +machine_device_initcall(p3060_qds, declare_of_platform_devices); + +#ifdef CONFIG_SWIOTLB +machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier); +#endif diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c index 09ced7221750..cebd786dc334 100644 --- a/arch/powerpc/platforms/85xx/sbc8560.c +++ b/arch/powerpc/platforms/85xx/sbc8560.c @@ -283,7 +283,7 @@ static int __init sbc8560_bdrstcr_init(void) of_address_to_resource(np, 0, &res); - printk(KERN_INFO "sbc8560: Found BRSTCR at i/o 0x%x\n", res.start); + printk(KERN_INFO "sbc8560: Found BRSTCR at %pR\n", &res); brstcr = ioremap(res.start, resource_size(&res)); if(!brstcr) diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index 5b9b901f6443..2df4785ffd4e 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -48,10 +48,11 @@ smp_85xx_kick_cpu(int nr) const u64 *cpu_rel_addr; __iomem u32 *bptr_vaddr; struct device_node *np; - int n = 0; + int n = 0, hw_cpu = get_hard_smp_processor_id(nr); int ioremappable; - WARN_ON (nr < 0 || nr >= NR_CPUS); + WARN_ON(nr < 0 || nr >= NR_CPUS); + WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS); pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr); @@ -79,7 +80,7 @@ smp_85xx_kick_cpu(int nr) local_irq_save(flags); - out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr); + out_be32(bptr_vaddr + BOOT_ENTRY_PIR, hw_cpu); #ifdef CONFIG_PPC32 out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start)); @@ -88,7 +89,7 @@ smp_85xx_kick_cpu(int nr) (ulong)(bptr_vaddr + SIZE_BOOT_ENTRY)); /* Wait a bit for the CPU to ack. */ - while ((__secondary_hold_acknowledge != nr) && (++n < 1000)) + while ((__secondary_hold_acknowledge != hw_cpu) && (++n < 1000)) mdelay(1); #else smp_generic_kick_cpu(nr); @@ -206,7 +207,7 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image) if ( !timeout ) printk(KERN_ERR "Unable to bring down secondary cpu(s)"); - for (i = 0; i < num_cpus; i++) + for_each_online_cpu(i) { if ( i == smp_processor_id() ) continue; mpic_reset_core(i); @@ -243,6 +244,7 @@ void __init mpc85xx_smp_init(void) * If left NULL, .message_pass defaults to * smp_muxed_ipi_message_pass */ + smp_85xx_ops.message_pass = NULL; smp_85xx_ops.cause_ipi = doorbell_cause_ipi; } diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index a0b5638c5dc8..8d6599d54ea6 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -4,6 +4,7 @@ menuconfig PPC_86xx depends on 6xx select FSL_SOC select ALTIVEC + select ARCH_WANT_OPTIONAL_GPIOLIB help The Freescale E600 SoCs have 74xx cores. diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index b9ba86191aed..e4588721ef34 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -1,5 +1,6 @@ menu "Platform support" +source "arch/powerpc/platforms/powernv/Kconfig" source "arch/powerpc/platforms/pseries/Kconfig" source "arch/powerpc/platforms/iseries/Kconfig" source "arch/powerpc/platforms/chrp/Kconfig" @@ -333,16 +334,6 @@ config OF_RTC source "arch/powerpc/sysdev/bestcomm/Kconfig" -config MPC8xxx_GPIO - bool "MPC512x/MPC8xxx GPIO support" - depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \ - FSL_SOC_BOOKE || PPC_86xx - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Say Y here if you're going to use hardware that connects to the - MPC512x/831x/834x/837x/8572/8610 GPIOs. - config SIMPLE_GPIO bool "Support for simple, memory-mapped GPIO controllers" depends on PPC @@ -355,7 +346,7 @@ config SIMPLE_GPIO on-board peripherals. config MCU_MPC8349EMITX - tristate "MPC8349E-mITX MCU driver" + bool "MPC8349E-mITX MCU driver" depends on I2C && PPC_83xx select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index e06e39589a09..a85990c886e9 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -69,6 +69,7 @@ config PPC_BOOK3S_64 bool "Server processors" select PPC_FPU select PPC_HAVE_PMU_SUPPORT + select SYS_SUPPORTS_HUGETLBFS config PPC_BOOK3E_64 bool "Embedded processors" @@ -173,6 +174,7 @@ config BOOKE config FSL_BOOKE bool depends on (E200 || E500) && PPC32 + select SYS_SUPPORTS_HUGETLBFS if PHYS_64BIT default y # this is for common code between PPC32 & PPC64 FSL BOOKE @@ -296,7 +298,7 @@ config PPC_BOOK3E_MMU config PPC_MM_SLICES bool - default y if HUGETLB_PAGE || (PPC_STD_MMU_64 && PPC_64K_PAGES) + default y if (PPC64 && HUGETLB_PAGE) || (PPC_STD_MMU_64 && PPC_64K_PAGES) default n config VIRT_CPU_ACCOUNTING diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 73e2116cfeed..2635a22bade2 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_PPC_82xx) += 82xx/ obj-$(CONFIG_PPC_83xx) += 83xx/ obj-$(CONFIG_FSL_SOC_BOOKE) += 85xx/ obj-$(CONFIG_PPC_86xx) += 86xx/ +obj-$(CONFIG_PPC_POWERNV) += powernv/ obj-$(CONFIG_PPC_PSERIES) += pseries/ obj-$(CONFIG_PPC_ISERIES) += iseries/ obj-$(CONFIG_PPC_MAPLE) += maple/ diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 26a067122a54..fc46fcac3921 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -1159,6 +1159,26 @@ static int __init setup_iommu_fixed(char *str) } __setup("iommu_fixed=", setup_iommu_fixed); +static u64 cell_dma_get_required_mask(struct device *dev) +{ + struct dma_map_ops *dma_ops; + + if (!dev->dma_mask) + return 0; + + if (!iommu_fixed_disabled && + cell_iommu_get_fixed_address(dev) != OF_BAD_ADDR) + return DMA_BIT_MASK(64); + + dma_ops = get_dma_ops(dev); + if (dma_ops->get_required_mask) + return dma_ops->get_required_mask(dev); + + WARN_ONCE(1, "no get_required_mask in %p ops", dma_ops); + + return DMA_BIT_MASK(64); +} + static int __init cell_iommu_init(void) { struct device_node *np; @@ -1175,6 +1195,7 @@ static int __init cell_iommu_init(void) /* Setup various ppc_md. callbacks */ ppc_md.pci_dma_dev_setup = cell_pci_dma_dev_setup; + ppc_md.dma_get_required_mask = cell_dma_get_required_mask; ppc_md.tce_build = tce_build_cell; ppc_md.tce_free = tce_free_cell; diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig new file mode 100644 index 000000000000..74fea5c21839 --- /dev/null +++ b/arch/powerpc/platforms/powernv/Kconfig @@ -0,0 +1,16 @@ +config PPC_POWERNV + depends on PPC64 && PPC_BOOK3S + bool "IBM PowerNV (Non-Virtualized) platform support" + select PPC_NATIVE + select PPC_XICS + select PPC_ICP_NATIVE + select PPC_P7_NAP + select PPC_PCI_CHOICE if EMBEDDED + default y + +config PPC_POWERNV_RTAS + depends on PPC_POWERNV + bool "Support for RTAS based PowerNV platforms such as BML" + default y + select PPC_ICS_RTAS + select PPC_RTAS diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile new file mode 100644 index 000000000000..31853008b418 --- /dev/null +++ b/arch/powerpc/platforms/powernv/Makefile @@ -0,0 +1,5 @@ +obj-y += setup.o opal-takeover.o opal-wrappers.o opal.o +obj-y += opal-rtc.o opal-nvram.o + +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o diff --git a/arch/powerpc/platforms/powernv/opal-nvram.c b/arch/powerpc/platforms/powernv/opal-nvram.c new file mode 100644 index 000000000000..3f83e1ae26ac --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal-nvram.c @@ -0,0 +1,88 @@ +/* + * PowerNV nvram code. + * + * Copyright 2011 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define DEBUG + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of.h> + +#include <asm/opal.h> +#include <asm/machdep.h> + +static unsigned int nvram_size; + +static ssize_t opal_nvram_size(void) +{ + return nvram_size; +} + +static ssize_t opal_nvram_read(char *buf, size_t count, loff_t *index) +{ + s64 rc; + int off; + + if (*index >= nvram_size) + return 0; + off = *index; + if ((off + count) > nvram_size) + count = nvram_size - off; + rc = opal_read_nvram(__pa(buf), count, off); + if (rc != OPAL_SUCCESS) + return -EIO; + *index += count; + return count; +} + +static ssize_t opal_nvram_write(char *buf, size_t count, loff_t *index) +{ + s64 rc = OPAL_BUSY; + int off; + + if (*index >= nvram_size) + return 0; + off = *index; + if ((off + count) > nvram_size) + count = nvram_size - off; + + while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { + rc = opal_write_nvram(__pa(buf), count, off); + if (rc == OPAL_BUSY_EVENT) + opal_poll_events(NULL); + } + *index += count; + return count; +} + +void __init opal_nvram_init(void) +{ + struct device_node *np; + const u32 *nbytes_p; + + np = of_find_compatible_node(NULL, NULL, "ibm,opal-nvram"); + if (np == NULL) + return; + + nbytes_p = of_get_property(np, "#bytes", NULL); + if (!nbytes_p) { + of_node_put(np); + return; + } + nvram_size = *nbytes_p; + + printk(KERN_INFO "OPAL nvram setup, %u bytes\n", nvram_size); + of_node_put(np); + + ppc_md.nvram_read = opal_nvram_read; + ppc_md.nvram_write = opal_nvram_write; + ppc_md.nvram_size = opal_nvram_size; +} + diff --git a/arch/powerpc/platforms/powernv/opal-rtc.c b/arch/powerpc/platforms/powernv/opal-rtc.c new file mode 100644 index 000000000000..2aa7641aac9b --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal-rtc.c @@ -0,0 +1,97 @@ +/* + * PowerNV Real Time Clock. + * + * Copyright 2011 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + + +#include <linux/kernel.h> +#include <linux/time.h> +#include <linux/bcd.h> +#include <linux/rtc.h> +#include <linux/delay.h> + +#include <asm/opal.h> +#include <asm/firmware.h> + +static void opal_to_tm(u32 y_m_d, u64 h_m_s_ms, struct rtc_time *tm) +{ + tm->tm_year = ((bcd2bin(y_m_d >> 24) * 100) + + bcd2bin((y_m_d >> 16) & 0xff)) - 1900; + tm->tm_mon = bcd2bin((y_m_d >> 8) & 0xff) - 1; + tm->tm_mday = bcd2bin(y_m_d & 0xff); + tm->tm_hour = bcd2bin((h_m_s_ms >> 56) & 0xff); + tm->tm_min = bcd2bin((h_m_s_ms >> 48) & 0xff); + tm->tm_sec = bcd2bin((h_m_s_ms >> 40) & 0xff); + + GregorianDay(tm); +} + +unsigned long __init opal_get_boot_time(void) +{ + struct rtc_time tm; + u32 y_m_d; + u64 h_m_s_ms; + long rc = OPAL_BUSY; + + while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { + rc = opal_rtc_read(&y_m_d, &h_m_s_ms); + if (rc == OPAL_BUSY_EVENT) + opal_poll_events(NULL); + else + mdelay(10); + } + if (rc != OPAL_SUCCESS) + return 0; + opal_to_tm(y_m_d, h_m_s_ms, &tm); + return mktime(tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec); +} + +void opal_get_rtc_time(struct rtc_time *tm) +{ + long rc = OPAL_BUSY; + u32 y_m_d; + u64 h_m_s_ms; + + while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { + rc = opal_rtc_read(&y_m_d, &h_m_s_ms); + if (rc == OPAL_BUSY_EVENT) + opal_poll_events(NULL); + else + mdelay(10); + } + if (rc != OPAL_SUCCESS) + return; + opal_to_tm(y_m_d, h_m_s_ms, tm); +} + +int opal_set_rtc_time(struct rtc_time *tm) +{ + long rc = OPAL_BUSY; + u32 y_m_d = 0; + u64 h_m_s_ms = 0; + + y_m_d |= ((u32)bin2bcd((tm->tm_year + 1900) / 100)) << 24; + y_m_d |= ((u32)bin2bcd((tm->tm_year + 1900) % 100)) << 16; + y_m_d |= ((u32)bin2bcd((tm->tm_mon + 1))) << 8; + y_m_d |= ((u32)bin2bcd(tm->tm_mday)); + + h_m_s_ms |= ((u64)bin2bcd(tm->tm_hour)) << 56; + h_m_s_ms |= ((u64)bin2bcd(tm->tm_min)) << 48; + h_m_s_ms |= ((u64)bin2bcd(tm->tm_sec)) << 40; + + while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { + rc = opal_rtc_write(y_m_d, h_m_s_ms); + if (rc == OPAL_BUSY_EVENT) + opal_poll_events(NULL); + else + mdelay(10); + } + return rc == OPAL_SUCCESS ? 0 : -EIO; +} diff --git a/arch/powerpc/platforms/powernv/opal-takeover.S b/arch/powerpc/platforms/powernv/opal-takeover.S new file mode 100644 index 000000000000..77b48b2b9309 --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal-takeover.S @@ -0,0 +1,140 @@ +/* + * PowerNV OPAL takeover assembly code, for use by prom_init.c + * + * Copyright 2011 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/ppc_asm.h> +#include <asm/hvcall.h> +#include <asm/asm-offsets.h> +#include <asm/opal.h> + +#define STK_PARAM(i) (48 + ((i)-3)*8) + +#define H_HAL_TAKEOVER 0x5124 +#define H_HAL_TAKEOVER_QUERY_MAGIC -1 + + .text +_GLOBAL(opal_query_takeover) + mfcr r0 + stw r0,8(r1) + std r3,STK_PARAM(r3)(r1) + std r4,STK_PARAM(r4)(r1) + li r3,H_HAL_TAKEOVER + li r4,H_HAL_TAKEOVER_QUERY_MAGIC + HVSC + ld r10,STK_PARAM(r3)(r1) + std r4,0(r10) + ld r10,STK_PARAM(r4)(r1) + std r5,0(r10) + lwz r0,8(r1) + mtcrf 0xff,r0 + blr + +_GLOBAL(opal_do_takeover) + mfcr r0 + stw r0,8(r1) + mflr r0 + std r0,16(r1) + bl __opal_do_takeover + ld r0,16(r1) + mtlr r0 + lwz r0,8(r1) + mtcrf 0xff,r0 + blr + +__opal_do_takeover: + ld r4,0(r3) + ld r5,0x8(r3) + ld r6,0x10(r3) + ld r7,0x18(r3) + ld r8,0x20(r3) + ld r9,0x28(r3) + ld r10,0x30(r3) + ld r11,0x38(r3) + li r3,H_HAL_TAKEOVER + HVSC + blr + + .globl opal_secondary_entry +opal_secondary_entry: + mr r31,r3 + mfmsr r11 + li r12,(MSR_SF | MSR_ISF)@highest + sldi r12,r12,48 + or r11,r11,r12 + mtmsrd r11 + isync + mfspr r4,SPRN_PIR + std r4,0(r3) +1: HMT_LOW + ld r4,8(r3) + cmpli cr0,r4,0 + beq 1b + HMT_MEDIUM +1: addi r3,r31,16 + bl __opal_do_takeover + b 1b + +_GLOBAL(opal_enter_rtas) + mflr r0 + std r0,16(r1) + stdu r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */ + + /* Because PROM is running in 32b mode, it clobbers the high order half + * of all registers that it saves. We therefore save those registers + * PROM might touch to the stack. (r0, r3-r13 are caller saved) + */ + SAVE_GPR(2, r1) + SAVE_GPR(13, r1) + SAVE_8GPRS(14, r1) + SAVE_10GPRS(22, r1) + mfcr r10 + mfmsr r11 + std r10,_CCR(r1) + std r11,_MSR(r1) + + /* Get the PROM entrypoint */ + mtlr r5 + + /* Switch MSR to 32 bits mode + */ + li r12,1 + rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG) + andc r11,r11,r12 + li r12,1 + rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG) + andc r11,r11,r12 + mtmsrd r11 + isync + + /* Enter RTAS here... */ + blrl + + /* Just make sure that r1 top 32 bits didn't get + * corrupt by OF + */ + rldicl r1,r1,0,32 + + /* Restore the MSR (back to 64 bits) */ + ld r0,_MSR(r1) + MTMSRD(r0) + isync + + /* Restore other registers */ + REST_GPR(2, r1) + REST_GPR(13, r1) + REST_8GPRS(14, r1) + REST_10GPRS(22, r1) + ld r4,_CCR(r1) + mtcr r4 + + addi r1,r1,PROM_FRAME_SIZE + ld r0,16(r1) + mtlr r0 + blr diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S new file mode 100644 index 000000000000..4a3f46d8533e --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal-wrappers.S @@ -0,0 +1,101 @@ +/* + * PowerNV OPAL API wrappers + * + * Copyright 2011 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/ppc_asm.h> +#include <asm/hvcall.h> +#include <asm/asm-offsets.h> +#include <asm/opal.h> + +/* TODO: + * + * - Trace irqs in/off (needs saving/restoring all args, argh...) + * - Get r11 feed up by Dave so I can have better register usage + */ +#define OPAL_CALL(name, token) \ + _GLOBAL(name); \ + mflr r0; \ + mfcr r12; \ + std r0,16(r1); \ + std r12,8(r1); \ + std r1,PACAR1(r13); \ + li r0,0; \ + mfmsr r12; \ + ori r0,r0,MSR_EE; \ + std r12,PACASAVEDMSR(r13); \ + andc r12,r12,r0; \ + mtmsrd r12,1; \ + LOAD_REG_ADDR(r0,.opal_return); \ + mtlr r0; \ + li r0,MSR_DR|MSR_IR; \ + andc r12,r12,r0; \ + li r0,token; \ + mtspr SPRN_HSRR1,r12; \ + LOAD_REG_ADDR(r11,opal); \ + ld r12,8(r11); \ + ld r2,0(r11); \ + mtspr SPRN_HSRR0,r12; \ + hrfid + +_STATIC(opal_return) + ld r2,PACATOC(r13); + ld r4,8(r1); + ld r5,16(r1); + ld r6,PACASAVEDMSR(r13); + mtspr SPRN_SRR0,r5; + mtspr SPRN_SRR1,r6; + mtcr r4; + rfid + +OPAL_CALL(opal_console_write, OPAL_CONSOLE_WRITE); +OPAL_CALL(opal_console_read, OPAL_CONSOLE_READ); +OPAL_CALL(opal_console_write_buffer_space, OPAL_CONSOLE_WRITE_BUFFER_SPACE); +OPAL_CALL(opal_rtc_read, OPAL_RTC_READ); +OPAL_CALL(opal_rtc_write, OPAL_RTC_WRITE); +OPAL_CALL(opal_cec_power_down, OPAL_CEC_POWER_DOWN); +OPAL_CALL(opal_cec_reboot, OPAL_CEC_REBOOT); +OPAL_CALL(opal_read_nvram, OPAL_READ_NVRAM); +OPAL_CALL(opal_write_nvram, OPAL_WRITE_NVRAM); +OPAL_CALL(opal_handle_interrupt, OPAL_HANDLE_INTERRUPT); +OPAL_CALL(opal_poll_events, OPAL_POLL_EVENTS); +OPAL_CALL(opal_pci_set_hub_tce_memory, OPAL_PCI_SET_HUB_TCE_MEMORY); +OPAL_CALL(opal_pci_set_phb_tce_memory, OPAL_PCI_SET_PHB_TCE_MEMORY); +OPAL_CALL(opal_pci_config_read_byte, OPAL_PCI_CONFIG_READ_BYTE); +OPAL_CALL(opal_pci_config_read_half_word, OPAL_PCI_CONFIG_READ_HALF_WORD); +OPAL_CALL(opal_pci_config_read_word, OPAL_PCI_CONFIG_READ_WORD); +OPAL_CALL(opal_pci_config_write_byte, OPAL_PCI_CONFIG_WRITE_BYTE); +OPAL_CALL(opal_pci_config_write_half_word, OPAL_PCI_CONFIG_WRITE_HALF_WORD); +OPAL_CALL(opal_pci_config_write_word, OPAL_PCI_CONFIG_WRITE_WORD); +OPAL_CALL(opal_set_xive, OPAL_SET_XIVE); +OPAL_CALL(opal_get_xive, OPAL_GET_XIVE); +OPAL_CALL(opal_register_exception_handler, OPAL_REGISTER_OPAL_EXCEPTION_HANDLER); +OPAL_CALL(opal_pci_eeh_freeze_status, OPAL_PCI_EEH_FREEZE_STATUS); +OPAL_CALL(opal_pci_eeh_freeze_clear, OPAL_PCI_EEH_FREEZE_CLEAR); +OPAL_CALL(opal_pci_shpc, OPAL_PCI_SHPC); +OPAL_CALL(opal_pci_phb_mmio_enable, OPAL_PCI_PHB_MMIO_ENABLE); +OPAL_CALL(opal_pci_set_phb_mem_window, OPAL_PCI_SET_PHB_MEM_WINDOW); +OPAL_CALL(opal_pci_map_pe_mmio_window, OPAL_PCI_MAP_PE_MMIO_WINDOW); +OPAL_CALL(opal_pci_set_phb_table_memory, OPAL_PCI_SET_PHB_TABLE_MEMORY); +OPAL_CALL(opal_pci_set_pe, OPAL_PCI_SET_PE); +OPAL_CALL(opal_pci_set_peltv, OPAL_PCI_SET_PELTV); +OPAL_CALL(opal_pci_set_mve, OPAL_PCI_SET_MVE); +OPAL_CALL(opal_pci_set_mve_enable, OPAL_PCI_SET_MVE_ENABLE); +OPAL_CALL(opal_pci_get_xive_reissue, OPAL_PCI_GET_XIVE_REISSUE); +OPAL_CALL(opal_pci_set_xive_reissue, OPAL_PCI_SET_XIVE_REISSUE); +OPAL_CALL(opal_pci_set_xive_pe, OPAL_PCI_SET_XIVE_PE); +OPAL_CALL(opal_get_xive_source, OPAL_GET_XIVE_SOURCE); +OPAL_CALL(opal_get_msi_32, OPAL_GET_MSI_32); +OPAL_CALL(opal_get_msi_64, OPAL_GET_MSI_64); +OPAL_CALL(opal_start_cpu, OPAL_START_CPU); +OPAL_CALL(opal_query_cpu_status, OPAL_QUERY_CPU_STATUS); +OPAL_CALL(opal_write_oppanel, OPAL_WRITE_OPPANEL); +OPAL_CALL(opal_pci_map_pe_dma_window, OPAL_PCI_MAP_PE_DMA_WINDOW); +OPAL_CALL(opal_pci_map_pe_dma_window_real, OPAL_PCI_MAP_PE_DMA_WINDOW_REAL); +OPAL_CALL(opal_pci_reset, OPAL_PCI_RESET); diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c new file mode 100644 index 000000000000..aaa0dba49471 --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal.c @@ -0,0 +1,322 @@ +/* + * PowerNV OPAL high level interfaces + * + * Copyright 2011 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include <linux/types.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/interrupt.h> +#include <asm/opal.h> +#include <asm/firmware.h> + +#include "powernv.h" + +struct opal { + u64 base; + u64 entry; +} opal; + +static struct device_node *opal_node; +static DEFINE_SPINLOCK(opal_write_lock); +extern u64 opal_mc_secondary_handler[]; + +int __init early_init_dt_scan_opal(unsigned long node, + const char *uname, int depth, void *data) +{ + const void *basep, *entryp; + unsigned long basesz, entrysz; + u64 glue; + + if (depth != 1 || strcmp(uname, "ibm,opal") != 0) + return 0; + + basep = of_get_flat_dt_prop(node, "opal-base-address", &basesz); + entryp = of_get_flat_dt_prop(node, "opal-entry-address", &entrysz); + + if (!basep || !entryp) + return 1; + + opal.base = of_read_number(basep, basesz/4); + opal.entry = of_read_number(entryp, entrysz/4); + + pr_debug("OPAL Base = 0x%llx (basep=%p basesz=%ld)\n", + opal.base, basep, basesz); + pr_debug("OPAL Entry = 0x%llx (entryp=%p basesz=%ld)\n", + opal.entry, entryp, entrysz); + + powerpc_firmware_features |= FW_FEATURE_OPAL; + if (of_flat_dt_is_compatible(node, "ibm,opal-v2")) { + powerpc_firmware_features |= FW_FEATURE_OPALv2; + printk("OPAL V2 detected !\n"); + } else { + printk("OPAL V1 detected !\n"); + } + + /* Hookup some exception handlers. We use the fwnmi area at 0x7000 + * to provide the glue space to OPAL + */ + glue = 0x7000; + opal_register_exception_handler(OPAL_MACHINE_CHECK_HANDLER, + __pa(opal_mc_secondary_handler[0]), + glue); + glue += 128; + opal_register_exception_handler(OPAL_HYPERVISOR_MAINTENANCE_HANDLER, + 0, glue); + glue += 128; + opal_register_exception_handler(OPAL_SOFTPATCH_HANDLER, 0, glue); + + return 1; +} + +int opal_get_chars(uint32_t vtermno, char *buf, int count) +{ + s64 len, rc; + u64 evt; + + if (!opal.entry) + return -ENODEV; + opal_poll_events(&evt); + if ((evt & OPAL_EVENT_CONSOLE_INPUT) == 0) + return 0; + len = count; + rc = opal_console_read(vtermno, &len, buf); + if (rc == OPAL_SUCCESS) + return len; + return 0; +} + +int opal_put_chars(uint32_t vtermno, const char *data, int total_len) +{ + int written = 0; + s64 len, rc; + unsigned long flags; + u64 evt; + + if (!opal.entry) + return -ENODEV; + + /* We want put_chars to be atomic to avoid mangling of hvsi + * packets. To do that, we first test for room and return + * -EAGAIN if there isn't enough. + * + * Unfortunately, opal_console_write_buffer_space() doesn't + * appear to work on opal v1, so we just assume there is + * enough room and be done with it + */ + spin_lock_irqsave(&opal_write_lock, flags); + if (firmware_has_feature(FW_FEATURE_OPALv2)) { + rc = opal_console_write_buffer_space(vtermno, &len); + if (rc || len < total_len) { + spin_unlock_irqrestore(&opal_write_lock, flags); + /* Closed -> drop characters */ + if (rc) + return total_len; + opal_poll_events(&evt); + return -EAGAIN; + } + } + + /* We still try to handle partial completions, though they + * should no longer happen. + */ + rc = OPAL_BUSY; + while(total_len > 0 && (rc == OPAL_BUSY || + rc == OPAL_BUSY_EVENT || rc == OPAL_SUCCESS)) { + len = total_len; + rc = opal_console_write(vtermno, &len, data); + if (rc == OPAL_SUCCESS) { + total_len -= len; + data += len; + written += len; + } + /* This is a bit nasty but we need that for the console to + * flush when there aren't any interrupts. We will clean + * things a bit later to limit that to synchronous path + * such as the kernel console and xmon/udbg + */ + do + opal_poll_events(&evt); + while(rc == OPAL_SUCCESS && (evt & OPAL_EVENT_CONSOLE_OUTPUT)); + } + spin_unlock_irqrestore(&opal_write_lock, flags); + return written; +} + +int opal_machine_check(struct pt_regs *regs) +{ + struct opal_machine_check_event *opal_evt = get_paca()->opal_mc_evt; + struct opal_machine_check_event evt; + const char *level, *sevstr, *subtype; + static const char *opal_mc_ue_types[] = { + "Indeterminate", + "Instruction fetch", + "Page table walk ifetch", + "Load/Store", + "Page table walk Load/Store", + }; + static const char *opal_mc_slb_types[] = { + "Indeterminate", + "Parity", + "Multihit", + }; + static const char *opal_mc_erat_types[] = { + "Indeterminate", + "Parity", + "Multihit", + }; + static const char *opal_mc_tlb_types[] = { + "Indeterminate", + "Parity", + "Multihit", + }; + + /* Copy the event structure and release the original */ + evt = *opal_evt; + opal_evt->in_use = 0; + + /* Print things out */ + if (evt.version != OpalMCE_V1) { + pr_err("Machine Check Exception, Unknown event version %d !\n", + evt.version); + return 0; + } + switch(evt.severity) { + case OpalMCE_SEV_NO_ERROR: + level = KERN_INFO; + sevstr = "Harmless"; + break; + case OpalMCE_SEV_WARNING: + level = KERN_WARNING; + sevstr = ""; + break; + case OpalMCE_SEV_ERROR_SYNC: + level = KERN_ERR; + sevstr = "Severe"; + break; + case OpalMCE_SEV_FATAL: + default: + level = KERN_ERR; + sevstr = "Fatal"; + break; + } + + printk("%s%s Machine check interrupt [%s]\n", level, sevstr, + evt.disposition == OpalMCE_DISPOSITION_RECOVERED ? + "Recovered" : "[Not recovered"); + printk("%s Initiator: %s\n", level, + evt.initiator == OpalMCE_INITIATOR_CPU ? "CPU" : "Unknown"); + switch(evt.error_type) { + case OpalMCE_ERROR_TYPE_UE: + subtype = evt.u.ue_error.ue_error_type < + ARRAY_SIZE(opal_mc_ue_types) ? + opal_mc_ue_types[evt.u.ue_error.ue_error_type] + : "Unknown"; + printk("%s Error type: UE [%s]\n", level, subtype); + if (evt.u.ue_error.effective_address_provided) + printk("%s Effective address: %016llx\n", + level, evt.u.ue_error.effective_address); + if (evt.u.ue_error.physical_address_provided) + printk("%s Physial address: %016llx\n", + level, evt.u.ue_error.physical_address); + break; + case OpalMCE_ERROR_TYPE_SLB: + subtype = evt.u.slb_error.slb_error_type < + ARRAY_SIZE(opal_mc_slb_types) ? + opal_mc_slb_types[evt.u.slb_error.slb_error_type] + : "Unknown"; + printk("%s Error type: SLB [%s]\n", level, subtype); + if (evt.u.slb_error.effective_address_provided) + printk("%s Effective address: %016llx\n", + level, evt.u.slb_error.effective_address); + break; + case OpalMCE_ERROR_TYPE_ERAT: + subtype = evt.u.erat_error.erat_error_type < + ARRAY_SIZE(opal_mc_erat_types) ? + opal_mc_erat_types[evt.u.erat_error.erat_error_type] + : "Unknown"; + printk("%s Error type: ERAT [%s]\n", level, subtype); + if (evt.u.erat_error.effective_address_provided) + printk("%s Effective address: %016llx\n", + level, evt.u.erat_error.effective_address); + break; + case OpalMCE_ERROR_TYPE_TLB: + subtype = evt.u.tlb_error.tlb_error_type < + ARRAY_SIZE(opal_mc_tlb_types) ? + opal_mc_tlb_types[evt.u.tlb_error.tlb_error_type] + : "Unknown"; + printk("%s Error type: TLB [%s]\n", level, subtype); + if (evt.u.tlb_error.effective_address_provided) + printk("%s Effective address: %016llx\n", + level, evt.u.tlb_error.effective_address); + break; + default: + case OpalMCE_ERROR_TYPE_UNKNOWN: + printk("%s Error type: Unknown\n", level); + break; + } + return evt.severity == OpalMCE_SEV_FATAL ? 0 : 1; +} + +static irqreturn_t opal_interrupt(int irq, void *data) +{ + uint64_t events; + + opal_handle_interrupt(virq_to_hw(irq), &events); + + /* XXX TODO: Do something with the events */ + + return IRQ_HANDLED; +} + +static int __init opal_init(void) +{ + struct device_node *np, *consoles; + const u32 *irqs; + int rc, i, irqlen; + + opal_node = of_find_node_by_path("/ibm,opal"); + if (!opal_node) { + pr_warn("opal: Node not found\n"); + return -ENODEV; + } + if (firmware_has_feature(FW_FEATURE_OPALv2)) + consoles = of_find_node_by_path("/ibm,opal/consoles"); + else + consoles = of_node_get(opal_node); + + /* Register serial ports */ + for_each_child_of_node(consoles, np) { + if (strcmp(np->name, "serial")) + continue; + of_platform_device_create(np, NULL, NULL); + } + of_node_put(consoles); + + /* Find all OPAL interrupts and request them */ + irqs = of_get_property(opal_node, "opal-interrupts", &irqlen); + pr_debug("opal: Found %d interrupts reserved for OPAL\n", + irqs ? (irqlen / 4) : 0); + for (i = 0; irqs && i < (irqlen / 4); i++, irqs++) { + unsigned int hwirq = be32_to_cpup(irqs); + unsigned int irq = irq_create_mapping(NULL, hwirq); + if (irq == NO_IRQ) { + pr_warning("opal: Failed to map irq 0x%x\n", hwirq); + continue; + } + rc = request_irq(irq, opal_interrupt, 0, "opal", NULL); + if (rc) + pr_warning("opal: Error %d requesting irq %d" + " (0x%x)\n", rc, irq, hwirq); + } + return 0; +} +subsys_initcall(opal_init); diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c new file mode 100644 index 000000000000..4c80f7c77d56 --- /dev/null +++ b/arch/powerpc/platforms/powernv/pci-p5ioc2.c @@ -0,0 +1,234 @@ +/* + * Support PCI/PCIe on PowerNV platforms + * + * Currently supports only P5IOC2 + * + * Copyright 2011 Benjamin Herrenschmidt, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/msi.h> + +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> +#include <asm/ppc-pci.h> +#include <asm/opal.h> +#include <asm/iommu.h> +#include <asm/tce.h> +#include <asm/abs_addr.h> + +#include "powernv.h" +#include "pci.h" + +/* For now, use a fixed amount of TCE memory for each p5ioc2 + * hub, 16M will do + */ +#define P5IOC2_TCE_MEMORY 0x01000000 + +#ifdef CONFIG_PCI_MSI +static int pnv_pci_p5ioc2_msi_setup(struct pnv_phb *phb, struct pci_dev *dev, + unsigned int hwirq, unsigned int is_64, + struct msi_msg *msg) +{ + if (WARN_ON(!is_64)) + return -ENXIO; + msg->data = hwirq - phb->msi_base; + msg->address_hi = 0x10000000; + msg->address_lo = 0; + + return 0; +} + +static void pnv_pci_init_p5ioc2_msis(struct pnv_phb *phb) +{ + unsigned int bmap_size; + const __be32 *prop = of_get_property(phb->hose->dn, + "ibm,opal-msi-ranges", NULL); + if (!prop) + return; + + /* Don't do MSI's on p5ioc2 PCI-X are they are not properly + * verified in HW + */ + if (of_device_is_compatible(phb->hose->dn, "ibm,p5ioc2-pcix")) + return; + phb->msi_base = be32_to_cpup(prop); + phb->msi_count = be32_to_cpup(prop + 1); + bmap_size = BITS_TO_LONGS(phb->msi_count) * sizeof(unsigned long); + phb->msi_map = zalloc_maybe_bootmem(bmap_size, GFP_KERNEL); + if (!phb->msi_map) { + pr_err("PCI %d: Failed to allocate MSI bitmap !\n", + phb->hose->global_number); + return; + } + phb->msi_setup = pnv_pci_p5ioc2_msi_setup; + phb->msi32_support = 0; + pr_info(" Allocated bitmap for %d MSIs (base IRQ 0x%x)\n", + phb->msi_count, phb->msi_base); +} +#else +static void pnv_pci_init_p5ioc2_msis(struct pnv_phb *phb) { } +#endif /* CONFIG_PCI_MSI */ + +static void __devinit pnv_pci_p5ioc2_dma_dev_setup(struct pnv_phb *phb, + struct pci_dev *pdev) +{ + if (phb->p5ioc2.iommu_table.it_map == NULL) + iommu_init_table(&phb->p5ioc2.iommu_table, phb->hose->node); + + set_iommu_table_base(&pdev->dev, &phb->p5ioc2.iommu_table); +} + +static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np, + void *tce_mem, u64 tce_size) +{ + struct pnv_phb *phb; + const u64 *prop64; + u64 phb_id; + int64_t rc; + static int primary = 1; + + pr_info(" Initializing p5ioc2 PHB %s\n", np->full_name); + + prop64 = of_get_property(np, "ibm,opal-phbid", NULL); + if (!prop64) { + pr_err(" Missing \"ibm,opal-phbid\" property !\n"); + return; + } + phb_id = be64_to_cpup(prop64); + pr_devel(" PHB-ID : 0x%016llx\n", phb_id); + pr_devel(" TCE AT : 0x%016lx\n", __pa(tce_mem)); + pr_devel(" TCE SZ : 0x%016llx\n", tce_size); + + rc = opal_pci_set_phb_tce_memory(phb_id, __pa(tce_mem), tce_size); + if (rc != OPAL_SUCCESS) { + pr_err(" Failed to set TCE memory, OPAL error %lld\n", rc); + return; + } + + phb = alloc_bootmem(sizeof(struct pnv_phb)); + if (phb) { + memset(phb, 0, sizeof(struct pnv_phb)); + phb->hose = pcibios_alloc_controller(np); + } + if (!phb || !phb->hose) { + pr_err(" Failed to allocate PCI controller\n"); + return; + } + + spin_lock_init(&phb->lock); + phb->hose->first_busno = 0; + phb->hose->last_busno = 0xff; + phb->hose->private_data = phb; + phb->opal_id = phb_id; + phb->type = PNV_PHB_P5IOC2; + + phb->regs = of_iomap(np, 0); + + if (phb->regs == NULL) + pr_err(" Failed to map registers !\n"); + else { + pr_devel(" P_BUID = 0x%08x\n", in_be32(phb->regs + 0x100)); + pr_devel(" P_IOSZ = 0x%08x\n", in_be32(phb->regs + 0x1b0)); + pr_devel(" P_IO_ST = 0x%08x\n", in_be32(phb->regs + 0x1e0)); + pr_devel(" P_MEM1_H = 0x%08x\n", in_be32(phb->regs + 0x1a0)); + pr_devel(" P_MEM1_L = 0x%08x\n", in_be32(phb->regs + 0x190)); + pr_devel(" P_MSZ1_L = 0x%08x\n", in_be32(phb->regs + 0x1c0)); + pr_devel(" P_MEM_ST = 0x%08x\n", in_be32(phb->regs + 0x1d0)); + pr_devel(" P_MEM2_H = 0x%08x\n", in_be32(phb->regs + 0x2c0)); + pr_devel(" P_MEM2_L = 0x%08x\n", in_be32(phb->regs + 0x2b0)); + pr_devel(" P_MSZ2_H = 0x%08x\n", in_be32(phb->regs + 0x2d0)); + pr_devel(" P_MSZ2_L = 0x%08x\n", in_be32(phb->regs + 0x2e0)); + } + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(phb->hose, np, primary); + primary = 0; + + phb->hose->ops = &pnv_pci_ops; + + /* Setup MSI support */ + pnv_pci_init_p5ioc2_msis(phb); + + /* Setup TCEs */ + phb->dma_dev_setup = pnv_pci_p5ioc2_dma_dev_setup; + pnv_pci_setup_iommu_table(&phb->p5ioc2.iommu_table, + tce_mem, tce_size, 0); +} + +void __init pnv_pci_init_p5ioc2_hub(struct device_node *np) +{ + struct device_node *phbn; + const u64 *prop64; + u64 hub_id; + void *tce_mem; + uint64_t tce_per_phb; + int64_t rc; + int phb_count = 0; + + pr_info("Probing p5ioc2 IO-Hub %s\n", np->full_name); + + prop64 = of_get_property(np, "ibm,opal-hubid", NULL); + if (!prop64) { + pr_err(" Missing \"ibm,opal-hubid\" property !\n"); + return; + } + hub_id = be64_to_cpup(prop64); + pr_info(" HUB-ID : 0x%016llx\n", hub_id); + + /* Currently allocate 16M of TCE memory for every Hub + * + * XXX TODO: Make it chip local if possible + */ + tce_mem = __alloc_bootmem(P5IOC2_TCE_MEMORY, P5IOC2_TCE_MEMORY, + __pa(MAX_DMA_ADDRESS)); + if (!tce_mem) { + pr_err(" Failed to allocate TCE Memory !\n"); + return; + } + pr_debug(" TCE : 0x%016lx..0x%016lx\n", + __pa(tce_mem), __pa(tce_mem) + P5IOC2_TCE_MEMORY - 1); + rc = opal_pci_set_hub_tce_memory(hub_id, __pa(tce_mem), + P5IOC2_TCE_MEMORY); + if (rc != OPAL_SUCCESS) { + pr_err(" Failed to allocate TCE memory, OPAL error %lld\n", rc); + return; + } + + /* Count child PHBs */ + for_each_child_of_node(np, phbn) { + if (of_device_is_compatible(phbn, "ibm,p5ioc2-pcix") || + of_device_is_compatible(phbn, "ibm,p5ioc2-pciex")) + phb_count++; + } + + /* Calculate how much TCE space we can give per PHB */ + tce_per_phb = __rounddown_pow_of_two(P5IOC2_TCE_MEMORY / phb_count); + pr_info(" Allocating %lld MB of TCE memory per PHB\n", + tce_per_phb >> 20); + + /* Initialize PHBs */ + for_each_child_of_node(np, phbn) { + if (of_device_is_compatible(phbn, "ibm,p5ioc2-pcix") || + of_device_is_compatible(phbn, "ibm,p5ioc2-pciex")) { + pnv_pci_init_p5ioc2_phb(phbn, tce_mem, tce_per_phb); + tce_mem += tce_per_phb; + } + } +} diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c new file mode 100644 index 000000000000..85bb66d7f933 --- /dev/null +++ b/arch/powerpc/platforms/powernv/pci.c @@ -0,0 +1,427 @@ +/* + * Support PCI/PCIe on PowerNV platforms + * + * Currently supports only P5IOC2 + * + * Copyright 2011 Benjamin Herrenschmidt, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/msi.h> + +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> +#include <asm/ppc-pci.h> +#include <asm/opal.h> +#include <asm/iommu.h> +#include <asm/tce.h> +#include <asm/abs_addr.h> + +#include "powernv.h" +#include "pci.h" + +/* Delay in usec */ +#define PCI_RESET_DELAY_US 3000000 + +#define cfg_dbg(fmt...) do { } while(0) +//#define cfg_dbg(fmt...) printk(fmt) + +#ifdef CONFIG_PCI_MSI +static int pnv_msi_check_device(struct pci_dev* pdev, int nvec, int type) +{ + struct pci_controller *hose = pci_bus_to_host(pdev->bus); + struct pnv_phb *phb = hose->private_data; + + return (phb && phb->msi_map) ? 0 : -ENODEV; +} + +static unsigned int pnv_get_one_msi(struct pnv_phb *phb) +{ + unsigned int id; + + spin_lock(&phb->lock); + id = find_next_zero_bit(phb->msi_map, phb->msi_count, phb->msi_next); + if (id >= phb->msi_count && phb->msi_next) + id = find_next_zero_bit(phb->msi_map, phb->msi_count, 0); + if (id >= phb->msi_count) { + spin_unlock(&phb->lock); + return 0; + } + __set_bit(id, phb->msi_map); + spin_unlock(&phb->lock); + return id + phb->msi_base; +} + +static void pnv_put_msi(struct pnv_phb *phb, unsigned int hwirq) +{ + unsigned int id; + + if (WARN_ON(hwirq < phb->msi_base || + hwirq >= (phb->msi_base + phb->msi_count))) + return; + id = hwirq - phb->msi_base; + spin_lock(&phb->lock); + __clear_bit(id, phb->msi_map); + spin_unlock(&phb->lock); +} + +static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) +{ + struct pci_controller *hose = pci_bus_to_host(pdev->bus); + struct pnv_phb *phb = hose->private_data; + struct msi_desc *entry; + struct msi_msg msg; + unsigned int hwirq, virq; + int rc; + + if (WARN_ON(!phb)) + return -ENODEV; + + list_for_each_entry(entry, &pdev->msi_list, list) { + if (!entry->msi_attrib.is_64 && !phb->msi32_support) { + pr_warn("%s: Supports only 64-bit MSIs\n", + pci_name(pdev)); + return -ENXIO; + } + hwirq = pnv_get_one_msi(phb); + if (!hwirq) { + pr_warn("%s: Failed to find a free MSI\n", + pci_name(pdev)); + return -ENOSPC; + } + virq = irq_create_mapping(NULL, hwirq); + if (virq == NO_IRQ) { + pr_warn("%s: Failed to map MSI to linux irq\n", + pci_name(pdev)); + pnv_put_msi(phb, hwirq); + return -ENOMEM; + } + rc = phb->msi_setup(phb, pdev, hwirq, entry->msi_attrib.is_64, + &msg); + if (rc) { + pr_warn("%s: Failed to setup MSI\n", pci_name(pdev)); + irq_dispose_mapping(virq); + pnv_put_msi(phb, hwirq); + return rc; + } + irq_set_msi_desc(virq, entry); + write_msi_msg(virq, &msg); + } + return 0; +} + +static void pnv_teardown_msi_irqs(struct pci_dev *pdev) +{ + struct pci_controller *hose = pci_bus_to_host(pdev->bus); + struct pnv_phb *phb = hose->private_data; + struct msi_desc *entry; + + if (WARN_ON(!phb)) + return; + + list_for_each_entry(entry, &pdev->msi_list, list) { + if (entry->irq == NO_IRQ) + continue; + irq_set_msi_desc(entry->irq, NULL); + pnv_put_msi(phb, virq_to_hw(entry->irq)); + irq_dispose_mapping(entry->irq); + } +} +#endif /* CONFIG_PCI_MSI */ + +static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus, + u32 bdfn) +{ + s64 rc; + u8 fstate; + u16 pcierr; + u32 pe_no; + + /* Get PE# if we support IODA */ + pe_no = phb->bdfn_to_pe ? phb->bdfn_to_pe(phb, bus, bdfn & 0xff) : 0; + + /* Read freeze status */ + rc = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, &fstate, &pcierr, + NULL); + if (rc) { + pr_warning("PCI %d: Failed to read EEH status for PE#%d," + " err %lld\n", phb->hose->global_number, pe_no, rc); + return; + } + cfg_dbg(" -> EEH check, bdfn=%04x PE%d fstate=%x\n", + bdfn, pe_no, fstate); + if (fstate != 0) { + rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no, + OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); + if (rc) { + pr_warning("PCI %d: Failed to clear EEH freeze state" + " for PE#%d, err %lld\n", + phb->hose->global_number, pe_no, rc); + } + } +} + +static int pnv_pci_read_config(struct pci_bus *bus, + unsigned int devfn, + int where, int size, u32 *val) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + struct pnv_phb *phb = hose->private_data; + u32 bdfn = (((uint64_t)bus->number) << 8) | devfn; + s64 rc; + + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + switch (size) { + case 1: { + u8 v8; + rc = opal_pci_config_read_byte(phb->opal_id, bdfn, where, &v8); + *val = (rc == OPAL_SUCCESS) ? v8 : 0xff; + break; + } + case 2: { + u16 v16; + rc = opal_pci_config_read_half_word(phb->opal_id, bdfn, where, + &v16); + *val = (rc == OPAL_SUCCESS) ? v16 : 0xffff; + break; + } + case 4: { + u32 v32; + rc = opal_pci_config_read_word(phb->opal_id, bdfn, where, &v32); + *val = (rc == OPAL_SUCCESS) ? v32 : 0xffffffff; + break; + } + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + cfg_dbg("pnv_pci_read_config bus: %x devfn: %x +%x/%x -> %08x\n", + bus->number, devfn, where, size, *val); + + /* Check if the PHB got frozen due to an error (no response) */ + pnv_pci_config_check_eeh(phb, bus, bdfn); + + return PCIBIOS_SUCCESSFUL; +} + +static int pnv_pci_write_config(struct pci_bus *bus, + unsigned int devfn, + int where, int size, u32 val) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + struct pnv_phb *phb = hose->private_data; + u32 bdfn = (((uint64_t)bus->number) << 8) | devfn; + + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + cfg_dbg("pnv_pci_write_config bus: %x devfn: %x +%x/%x -> %08x\n", + bus->number, devfn, where, size, val); + switch (size) { + case 1: + opal_pci_config_write_byte(phb->opal_id, bdfn, where, val); + break; + case 2: + opal_pci_config_write_half_word(phb->opal_id, bdfn, where, val); + break; + case 4: + opal_pci_config_write_word(phb->opal_id, bdfn, where, val); + break; + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + /* Check if the PHB got frozen due to an error (no response) */ + pnv_pci_config_check_eeh(phb, bus, bdfn); + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops pnv_pci_ops = { + .read = pnv_pci_read_config, + .write = pnv_pci_write_config, +}; + +static int pnv_tce_build(struct iommu_table *tbl, long index, long npages, + unsigned long uaddr, enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + u64 proto_tce; + u64 *tcep; + u64 rpn; + + proto_tce = TCE_PCI_READ; // Read allowed + + if (direction != DMA_TO_DEVICE) + proto_tce |= TCE_PCI_WRITE; + + tcep = ((u64 *)tbl->it_base) + index; + + while (npages--) { + /* can't move this out since we might cross LMB boundary */ + rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT; + *tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT; + + uaddr += TCE_PAGE_SIZE; + tcep++; + } + return 0; +} + +static void pnv_tce_free(struct iommu_table *tbl, long index, long npages) +{ + u64 *tcep = ((u64 *)tbl->it_base) + index; + + while (npages--) + *(tcep++) = 0; +} + +void pnv_pci_setup_iommu_table(struct iommu_table *tbl, + void *tce_mem, u64 tce_size, + u64 dma_offset) +{ + tbl->it_blocksize = 16; + tbl->it_base = (unsigned long)tce_mem; + tbl->it_offset = dma_offset >> IOMMU_PAGE_SHIFT; + tbl->it_index = 0; + tbl->it_size = tce_size >> 3; + tbl->it_busno = 0; + tbl->it_type = TCE_PCI; +} + +static struct iommu_table * __devinit +pnv_pci_setup_bml_iommu(struct pci_controller *hose) +{ + struct iommu_table *tbl; + const __be64 *basep; + const __be32 *sizep; + + basep = of_get_property(hose->dn, "linux,tce-base", NULL); + sizep = of_get_property(hose->dn, "linux,tce-size", NULL); + if (basep == NULL || sizep == NULL) { + pr_err("PCI: %s has missing tce entries !\n", hose->dn->full_name); + return NULL; + } + tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, hose->node); + if (WARN_ON(!tbl)) + return NULL; + pnv_pci_setup_iommu_table(tbl, __va(be64_to_cpup(basep)), + be32_to_cpup(sizep), 0); + iommu_init_table(tbl, hose->node); + return tbl; +} + +static void __devinit pnv_pci_dma_fallback_setup(struct pci_controller *hose, + struct pci_dev *pdev) +{ + struct device_node *np = pci_bus_to_OF_node(hose->bus); + struct pci_dn *pdn; + + if (np == NULL) + return; + pdn = PCI_DN(np); + if (!pdn->iommu_table) + pdn->iommu_table = pnv_pci_setup_bml_iommu(hose); + if (!pdn->iommu_table) + return; + set_iommu_table_base(&pdev->dev, pdn->iommu_table); +} + +static void __devinit pnv_pci_dma_dev_setup(struct pci_dev *pdev) +{ + struct pci_controller *hose = pci_bus_to_host(pdev->bus); + struct pnv_phb *phb = hose->private_data; + + /* If we have no phb structure, try to setup a fallback based on + * the device-tree (RTAS PCI for example) + */ + if (phb && phb->dma_dev_setup) + phb->dma_dev_setup(phb, pdev); + else + pnv_pci_dma_fallback_setup(hose, pdev); +} + +static int pnv_pci_probe_mode(struct pci_bus *bus) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + const __be64 *tstamp; + u64 now, target; + + + /* We hijack this as a way to ensure we have waited long + * enough since the reset was lifted on the PCI bus + */ + if (bus != hose->bus) + return PCI_PROBE_NORMAL; + tstamp = of_get_property(hose->dn, "reset-clear-timestamp", NULL); + if (!tstamp || !*tstamp) + return PCI_PROBE_NORMAL; + + now = mftb() / tb_ticks_per_usec; + target = (be64_to_cpup(tstamp) / tb_ticks_per_usec) + + PCI_RESET_DELAY_US; + + pr_devel("pci %04d: Reset target: 0x%llx now: 0x%llx\n", + hose->global_number, target, now); + + if (now < target) + msleep((target - now + 999) / 1000); + + return PCI_PROBE_NORMAL; +} + +void __init pnv_pci_init(void) +{ + struct device_node *np; + + pci_set_flags(PCI_CAN_SKIP_ISA_ALIGN); + + /* We do not want to just probe */ + pci_probe_only = 0; + + /* OPAL absent, try POPAL first then RTAS detection of PHBs */ + if (!firmware_has_feature(FW_FEATURE_OPAL)) { +#ifdef CONFIG_PPC_POWERNV_RTAS + init_pci_config_tokens(); + find_and_init_phbs(); +#endif /* CONFIG_PPC_POWERNV_RTAS */ + } else { + /* OPAL is here, do our normal stuff */ + + /* Look for p5ioc2 IO-Hubs */ + for_each_compatible_node(np, NULL, "ibm,p5ioc2") + pnv_pci_init_p5ioc2_hub(np); + } + + /* Setup the linkage between OF nodes and PHBs */ + pci_devs_phb_init(); + + /* Configure IOMMU DMA hooks */ + ppc_md.pci_dma_dev_setup = pnv_pci_dma_dev_setup; + ppc_md.tce_build = pnv_tce_build; + ppc_md.tce_free = pnv_tce_free; + ppc_md.pci_probe_mode = pnv_pci_probe_mode; + set_pci_dma_ops(&dma_iommu_ops); + + /* Configure MSIs */ +#ifdef CONFIG_PCI_MSI + ppc_md.msi_check_device = pnv_msi_check_device; + ppc_md.setup_msi_irqs = pnv_setup_msi_irqs; + ppc_md.teardown_msi_irqs = pnv_teardown_msi_irqs; +#endif +} diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h new file mode 100644 index 000000000000..d4dbc4950936 --- /dev/null +++ b/arch/powerpc/platforms/powernv/pci.h @@ -0,0 +1,48 @@ +#ifndef __POWERNV_PCI_H +#define __POWERNV_PCI_H + +struct pci_dn; + +enum pnv_phb_type { + PNV_PHB_P5IOC2, + PNV_PHB_IODA1, + PNV_PHB_IODA2, +}; + +struct pnv_phb { + struct pci_controller *hose; + enum pnv_phb_type type; + u64 opal_id; + void __iomem *regs; + spinlock_t lock; + +#ifdef CONFIG_PCI_MSI + unsigned long *msi_map; + unsigned int msi_base; + unsigned int msi_count; + unsigned int msi_next; + unsigned int msi32_support; +#endif + int (*msi_setup)(struct pnv_phb *phb, struct pci_dev *dev, + unsigned int hwirq, unsigned int is_64, + struct msi_msg *msg); + void (*dma_dev_setup)(struct pnv_phb *phb, struct pci_dev *pdev); + void (*fixup_phb)(struct pci_controller *hose); + u32 (*bdfn_to_pe)(struct pnv_phb *phb, struct pci_bus *bus, u32 devfn); + + union { + struct { + struct iommu_table iommu_table; + } p5ioc2; + }; +}; + +extern struct pci_ops pnv_pci_ops; + +extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl, + void *tce_mem, u64 tce_size, + u64 dma_offset); +extern void pnv_pci_init_p5ioc2_hub(struct device_node *np); + + +#endif /* __POWERNV_PCI_H */ diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h new file mode 100644 index 000000000000..8a9df7f9667e --- /dev/null +++ b/arch/powerpc/platforms/powernv/powernv.h @@ -0,0 +1,16 @@ +#ifndef _POWERNV_H +#define _POWERNV_H + +#ifdef CONFIG_SMP +extern void pnv_smp_init(void); +#else +static inline void pnv_smp_init(void) { } +#endif + +#ifdef CONFIG_PCI +extern void pnv_pci_init(void); +#else +static inline void pnv_pci_init(void) { } +#endif + +#endif /* _POWERNV_H */ diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c new file mode 100644 index 000000000000..467bd4ac6824 --- /dev/null +++ b/arch/powerpc/platforms/powernv/setup.c @@ -0,0 +1,196 @@ +/* + * PowerNV setup code. + * + * Copyright 2011 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include <linux/cpu.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/tty.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/of.h> +#include <linux/interrupt.h> +#include <linux/bug.h> + +#include <asm/machdep.h> +#include <asm/firmware.h> +#include <asm/xics.h> +#include <asm/rtas.h> +#include <asm/opal.h> +#include <asm/xics.h> + +#include "powernv.h" + +static void __init pnv_setup_arch(void) +{ + /* Initialize SMP */ + pnv_smp_init(); + + /* Setup PCI */ + pnv_pci_init(); + + /* Setup RTC and NVRAM callbacks */ + if (firmware_has_feature(FW_FEATURE_OPAL)) + opal_nvram_init(); + + /* Enable NAP mode */ + powersave_nap = 1; + + /* XXX PMCS */ +} + +static void __init pnv_init_early(void) +{ +#ifdef CONFIG_HVC_OPAL + if (firmware_has_feature(FW_FEATURE_OPAL)) + hvc_opal_init_early(); + else +#endif + add_preferred_console("hvc", 0, NULL); +} + +static void __init pnv_init_IRQ(void) +{ + xics_init(); + + WARN_ON(!ppc_md.get_irq); +} + +static void pnv_show_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + const char *model = ""; + + root = of_find_node_by_path("/"); + if (root) + model = of_get_property(root, "model", NULL); + seq_printf(m, "machine\t\t: PowerNV %s\n", model); + if (firmware_has_feature(FW_FEATURE_OPALv2)) + seq_printf(m, "firmware\t: OPAL v2\n"); + else if (firmware_has_feature(FW_FEATURE_OPAL)) + seq_printf(m, "firmware\t: OPAL v1\n"); + else + seq_printf(m, "firmware\t: BML\n"); + of_node_put(root); +} + +static void __noreturn pnv_restart(char *cmd) +{ + long rc = OPAL_BUSY; + + while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { + rc = opal_cec_reboot(); + if (rc == OPAL_BUSY_EVENT) + opal_poll_events(NULL); + else + mdelay(10); + } + for (;;) + opal_poll_events(NULL); +} + +static void __noreturn pnv_power_off(void) +{ + long rc = OPAL_BUSY; + + while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { + rc = opal_cec_power_down(0); + if (rc == OPAL_BUSY_EVENT) + opal_poll_events(NULL); + else + mdelay(10); + } + for (;;) + opal_poll_events(NULL); +} + +static void __noreturn pnv_halt(void) +{ + pnv_power_off(); +} + +static void pnv_progress(char *s, unsigned short hex) +{ +} + +#ifdef CONFIG_KEXEC +static void pnv_kexec_cpu_down(int crash_shutdown, int secondary) +{ + xics_kexec_teardown_cpu(secondary); +} +#endif /* CONFIG_KEXEC */ + +static void __init pnv_setup_machdep_opal(void) +{ + ppc_md.get_boot_time = opal_get_boot_time; + ppc_md.get_rtc_time = opal_get_rtc_time; + ppc_md.set_rtc_time = opal_set_rtc_time; + ppc_md.restart = pnv_restart; + ppc_md.power_off = pnv_power_off; + ppc_md.halt = pnv_halt; + ppc_md.machine_check_exception = opal_machine_check; +} + +#ifdef CONFIG_PPC_POWERNV_RTAS +static void __init pnv_setup_machdep_rtas(void) +{ + if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) { + ppc_md.get_boot_time = rtas_get_boot_time; + ppc_md.get_rtc_time = rtas_get_rtc_time; + ppc_md.set_rtc_time = rtas_set_rtc_time; + } + ppc_md.restart = rtas_restart; + ppc_md.power_off = rtas_power_off; + ppc_md.halt = rtas_halt; +} +#endif /* CONFIG_PPC_POWERNV_RTAS */ + +static int __init pnv_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "ibm,powernv")) + return 0; + + hpte_init_native(); + + if (firmware_has_feature(FW_FEATURE_OPAL)) + pnv_setup_machdep_opal(); +#ifdef CONFIG_PPC_POWERNV_RTAS + else if (rtas.base) + pnv_setup_machdep_rtas(); +#endif /* CONFIG_PPC_POWERNV_RTAS */ + + pr_debug("PowerNV detected !\n"); + + return 1; +} + +define_machine(powernv) { + .name = "PowerNV", + .probe = pnv_probe, + .init_early = pnv_init_early, + .setup_arch = pnv_setup_arch, + .init_IRQ = pnv_init_IRQ, + .show_cpuinfo = pnv_show_cpuinfo, + .progress = pnv_progress, + .power_save = power7_idle, + .calibrate_decr = generic_calibrate_decr, +#ifdef CONFIG_KEXEC + .kexec_cpu_down = pnv_kexec_cpu_down, +#endif +}; diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c new file mode 100644 index 000000000000..e87736685243 --- /dev/null +++ b/arch/powerpc/platforms/powernv/smp.c @@ -0,0 +1,182 @@ +/* + * SMP support for PowerNV machines. + * + * Copyright 2011 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/cpu.h> + +#include <asm/irq.h> +#include <asm/smp.h> +#include <asm/paca.h> +#include <asm/machdep.h> +#include <asm/cputable.h> +#include <asm/firmware.h> +#include <asm/system.h> +#include <asm/rtas.h> +#include <asm/vdso_datapage.h> +#include <asm/cputhreads.h> +#include <asm/xics.h> +#include <asm/opal.h> + +#include "powernv.h" + +#ifdef DEBUG +#include <asm/udbg.h> +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +static void __cpuinit pnv_smp_setup_cpu(int cpu) +{ + if (cpu != boot_cpuid) + xics_setup_cpu(); +} + +static int pnv_smp_cpu_bootable(unsigned int nr) +{ + /* Special case - we inhibit secondary thread startup + * during boot if the user requests it. + */ + if (system_state < SYSTEM_RUNNING && cpu_has_feature(CPU_FTR_SMT)) { + if (!smt_enabled_at_boot && cpu_thread_in_core(nr) != 0) + return 0; + if (smt_enabled_at_boot + && cpu_thread_in_core(nr) >= smt_enabled_at_boot) + return 0; + } + + return 1; +} + +int __devinit pnv_smp_kick_cpu(int nr) +{ + unsigned int pcpu = get_hard_smp_processor_id(nr); + unsigned long start_here = __pa(*((unsigned long *) + generic_secondary_smp_init)); + long rc; + + BUG_ON(nr < 0 || nr >= NR_CPUS); + + /* On OPAL v2 the CPU are still spinning inside OPAL itself, + * get them back now + */ + if (firmware_has_feature(FW_FEATURE_OPALv2)) { + pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", nr, pcpu); + rc = opal_start_cpu(pcpu, start_here); + if (rc != OPAL_SUCCESS) + pr_warn("OPAL Error %ld starting CPU %d\n", + rc, nr); + } + return smp_generic_kick_cpu(nr); +} + +#ifdef CONFIG_HOTPLUG_CPU + +static int pnv_smp_cpu_disable(void) +{ + int cpu = smp_processor_id(); + + /* This is identical to pSeries... might consolidate by + * moving migrate_irqs_away to a ppc_md with default to + * the generic fixup_irqs. --BenH. + */ + set_cpu_online(cpu, false); + vdso_data->processorCount--; + if (cpu == boot_cpuid) + boot_cpuid = cpumask_any(cpu_online_mask); + xics_migrate_irqs_away(); + return 0; +} + +static void pnv_smp_cpu_kill_self(void) +{ + unsigned int cpu; + + /* If powersave_nap is enabled, use NAP mode, else just + * spin aimlessly + */ + if (!powersave_nap) { + generic_mach_cpu_die(); + return; + } + + /* Standard hot unplug procedure */ + local_irq_disable(); + idle_task_exit(); + current->active_mm = NULL; /* for sanity */ + cpu = smp_processor_id(); + DBG("CPU%d offline\n", cpu); + generic_set_cpu_dead(cpu); + smp_wmb(); + + /* We don't want to take decrementer interrupts while we are offline, + * so clear LPCR:PECE1. We keep PECE2 enabled. + */ + mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1); + while (!generic_check_cpu_restart(cpu)) { + power7_idle(); + if (!generic_check_cpu_restart(cpu)) { + DBG("CPU%d Unexpected exit while offline !\n", cpu); + /* We may be getting an IPI, so we re-enable + * interrupts to process it, it will be ignored + * since we aren't online (hopefully) + */ + local_irq_enable(); + local_irq_disable(); + } + } + mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_PECE1); + DBG("CPU%d coming online...\n", cpu); +} + +#endif /* CONFIG_HOTPLUG_CPU */ + +static struct smp_ops_t pnv_smp_ops = { + .message_pass = smp_muxed_ipi_message_pass, + .cause_ipi = NULL, /* Filled at runtime by xics_smp_probe() */ + .probe = xics_smp_probe, + .kick_cpu = pnv_smp_kick_cpu, + .setup_cpu = pnv_smp_setup_cpu, + .cpu_bootable = pnv_smp_cpu_bootable, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = pnv_smp_cpu_disable, + .cpu_die = generic_cpu_die, +#endif /* CONFIG_HOTPLUG_CPU */ +}; + +/* This is called very early during platform setup_arch */ +void __init pnv_smp_init(void) +{ + smp_ops = &pnv_smp_ops; + + /* XXX We don't yet have a proper entry point from HAL, for + * now we rely on kexec-style entry from BML + */ + +#ifdef CONFIG_PPC_RTAS + /* Non-lpar has additional take/give timebase */ + if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) { + smp_ops->give_timebase = rtas_give_timebase; + smp_ops->take_timebase = rtas_take_timebase; + } +#endif /* CONFIG_PPC_RTAS */ + +#ifdef CONFIG_HOTPLUG_CPU + ppc_md.cpu_die = pnv_smp_cpu_kill_self; +#endif +} diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig index dfe316b161a9..476d9d9b2405 100644 --- a/arch/powerpc/platforms/ps3/Kconfig +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -148,4 +148,16 @@ config PS3_LPM profiling support of the Cell processor with programs like oprofile and perfmon2, then say Y or M, otherwise say N. +config PS3GELIC_UDBG + bool "PS3 udbg output via UDP broadcasts on Ethernet" + depends on PPC_PS3 + help + Enables udbg early debugging output by sending broadcast UDP + via the Ethernet port (UDP port number 18194). + + This driver uses a trivial implementation and is independent + from the main network driver. + + If in doubt, say N here. + endmenu diff --git a/arch/powerpc/platforms/ps3/Makefile b/arch/powerpc/platforms/ps3/Makefile index ac1bdf844eca..02b9e636dab7 100644 --- a/arch/powerpc/platforms/ps3/Makefile +++ b/arch/powerpc/platforms/ps3/Makefile @@ -2,6 +2,7 @@ obj-y += setup.o mm.o time.o hvcall.o htab.o repository.o obj-y += interrupt.o exports.o os-area.o obj-y += system-bus.o +obj-$(CONFIG_PS3GELIC_UDBG) += gelic_udbg.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SPU_BASE) += spu.o obj-y += device-init.o diff --git a/arch/powerpc/platforms/ps3/gelic_udbg.c b/arch/powerpc/platforms/ps3/gelic_udbg.c new file mode 100644 index 000000000000..20b46a19a48f --- /dev/null +++ b/arch/powerpc/platforms/ps3/gelic_udbg.c @@ -0,0 +1,273 @@ +/* + * udbg debug output routine via GELIC UDP broadcasts + * + * Copyright (C) 2007 Sony Computer Entertainment Inc. + * Copyright 2006, 2007 Sony Corporation + * Copyright (C) 2010 Hector Martin <hector@marcansoft.com> + * Copyright (C) 2011 Andre Heider <a.heider@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include <asm/io.h> +#include <asm/udbg.h> +#include <asm/lv1call.h> + +#define GELIC_BUS_ID 1 +#define GELIC_DEVICE_ID 0 +#define GELIC_DEBUG_PORT 18194 +#define GELIC_MAX_MESSAGE_SIZE 1000 + +#define GELIC_LV1_GET_MAC_ADDRESS 1 +#define GELIC_LV1_GET_VLAN_ID 4 +#define GELIC_LV1_VLAN_TX_ETHERNET_0 2 + +#define GELIC_DESCR_DMA_STAT_MASK 0xf0000000 +#define GELIC_DESCR_DMA_CARDOWNED 0xa0000000 + +#define GELIC_DESCR_TX_DMA_IKE 0x00080000 +#define GELIC_DESCR_TX_DMA_NO_CHKSUM 0x00000000 +#define GELIC_DESCR_TX_DMA_FRAME_TAIL 0x00040000 + +#define GELIC_DESCR_DMA_CMD_NO_CHKSUM (GELIC_DESCR_DMA_CARDOWNED | \ + GELIC_DESCR_TX_DMA_IKE | \ + GELIC_DESCR_TX_DMA_NO_CHKSUM) + +static u64 bus_addr; + +struct gelic_descr { + /* as defined by the hardware */ + __be32 buf_addr; + __be32 buf_size; + __be32 next_descr_addr; + __be32 dmac_cmd_status; + __be32 result_size; + __be32 valid_size; /* all zeroes for tx */ + __be32 data_status; + __be32 data_error; /* all zeroes for tx */ +} __attribute__((aligned(32))); + +struct debug_block { + struct gelic_descr descr; + u8 pkt[1520]; +} __packed; + +struct ethhdr { + u8 dest[6]; + u8 src[6]; + u16 type; +} __packed; + +struct vlantag { + u16 vlan; + u16 subtype; +} __packed; + +struct iphdr { + u8 ver_len; + u8 dscp_ecn; + u16 total_length; + u16 ident; + u16 frag_off_flags; + u8 ttl; + u8 proto; + u16 checksum; + u32 src; + u32 dest; +} __packed; + +struct udphdr { + u16 src; + u16 dest; + u16 len; + u16 checksum; +} __packed; + +static __iomem struct ethhdr *h_eth; +static __iomem struct vlantag *h_vlan; +static __iomem struct iphdr *h_ip; +static __iomem struct udphdr *h_udp; + +static __iomem char *pmsg; +static __iomem char *pmsgc; + +static __iomem struct debug_block dbg __attribute__((aligned(32))); + +static int header_size; + +static void map_dma_mem(int bus_id, int dev_id, void *start, size_t len, + u64 *real_bus_addr) +{ + s64 result; + u64 real_addr = ((u64)start) & 0x0fffffffffffffffUL; + u64 real_end = real_addr + len; + u64 map_start = real_addr & ~0xfff; + u64 map_end = (real_end + 0xfff) & ~0xfff; + u64 bus_addr = 0; + + u64 flags = 0xf800000000000000UL; + + result = lv1_allocate_device_dma_region(bus_id, dev_id, + map_end - map_start, 12, 0, + &bus_addr); + if (result) + lv1_panic(0); + + result = lv1_map_device_dma_region(bus_id, dev_id, map_start, + bus_addr, map_end - map_start, + flags); + if (result) + lv1_panic(0); + + *real_bus_addr = bus_addr + real_addr - map_start; +} + +static int unmap_dma_mem(int bus_id, int dev_id, u64 bus_addr, size_t len) +{ + s64 result; + u64 real_bus_addr; + + real_bus_addr = bus_addr & ~0xfff; + len += bus_addr - real_bus_addr; + len = (len + 0xfff) & ~0xfff; + + result = lv1_unmap_device_dma_region(bus_id, dev_id, real_bus_addr, + len); + if (result) + return result; + + return lv1_free_device_dma_region(bus_id, dev_id, real_bus_addr); +} + +static void gelic_debug_init(void) +{ + s64 result; + u64 v2; + u64 mac; + u64 vlan_id; + + result = lv1_open_device(GELIC_BUS_ID, GELIC_DEVICE_ID, 0); + if (result) + lv1_panic(0); + + map_dma_mem(GELIC_BUS_ID, GELIC_DEVICE_ID, &dbg, sizeof(dbg), + &bus_addr); + + memset(&dbg, 0, sizeof(dbg)); + + dbg.descr.buf_addr = bus_addr + offsetof(struct debug_block, pkt); + + wmb(); + + result = lv1_net_control(GELIC_BUS_ID, GELIC_DEVICE_ID, + GELIC_LV1_GET_MAC_ADDRESS, 0, 0, 0, + &mac, &v2); + if (result) + lv1_panic(0); + + mac <<= 16; + + h_eth = (struct ethhdr *)dbg.pkt; + + memset(&h_eth->dest, 0xff, 6); + memcpy(&h_eth->src, &mac, 6); + + header_size = sizeof(struct ethhdr); + + result = lv1_net_control(GELIC_BUS_ID, GELIC_DEVICE_ID, + GELIC_LV1_GET_VLAN_ID, + GELIC_LV1_VLAN_TX_ETHERNET_0, 0, 0, + &vlan_id, &v2); + if (!result) { + h_eth->type = 0x8100; + + header_size += sizeof(struct vlantag); + h_vlan = (struct vlantag *)(h_eth + 1); + h_vlan->vlan = vlan_id; + h_vlan->subtype = 0x0800; + h_ip = (struct iphdr *)(h_vlan + 1); + } else { + h_eth->type = 0x0800; + h_ip = (struct iphdr *)(h_eth + 1); + } + + header_size += sizeof(struct iphdr); + h_ip->ver_len = 0x45; + h_ip->ttl = 10; + h_ip->proto = 0x11; + h_ip->src = 0x00000000; + h_ip->dest = 0xffffffff; + + header_size += sizeof(struct udphdr); + h_udp = (struct udphdr *)(h_ip + 1); + h_udp->src = GELIC_DEBUG_PORT; + h_udp->dest = GELIC_DEBUG_PORT; + + pmsgc = pmsg = (char *)(h_udp + 1); +} + +static void gelic_debug_shutdown(void) +{ + if (bus_addr) + unmap_dma_mem(GELIC_BUS_ID, GELIC_DEVICE_ID, + bus_addr, sizeof(dbg)); + lv1_close_device(GELIC_BUS_ID, GELIC_DEVICE_ID); +} + +static void gelic_sendbuf(int msgsize) +{ + u16 *p; + u32 sum; + int i; + + dbg.descr.buf_size = header_size + msgsize; + h_ip->total_length = msgsize + sizeof(struct udphdr) + + sizeof(struct iphdr); + h_udp->len = msgsize + sizeof(struct udphdr); + + h_ip->checksum = 0; + sum = 0; + p = (u16 *)h_ip; + for (i = 0; i < 5; i++) + sum += *p++; + h_ip->checksum = ~(sum + (sum >> 16)); + + dbg.descr.dmac_cmd_status = GELIC_DESCR_DMA_CMD_NO_CHKSUM | + GELIC_DESCR_TX_DMA_FRAME_TAIL; + dbg.descr.result_size = 0; + dbg.descr.data_status = 0; + + wmb(); + + lv1_net_start_tx_dma(GELIC_BUS_ID, GELIC_DEVICE_ID, bus_addr, 0); + + while ((dbg.descr.dmac_cmd_status & GELIC_DESCR_DMA_STAT_MASK) == + GELIC_DESCR_DMA_CARDOWNED) + cpu_relax(); +} + +static void ps3gelic_udbg_putc(char ch) +{ + *pmsgc++ = ch; + if (ch == '\n' || (pmsgc-pmsg) >= GELIC_MAX_MESSAGE_SIZE) { + gelic_sendbuf(pmsgc-pmsg); + pmsgc = pmsg; + } +} + +void __init udbg_init_ps3gelic(void) +{ + gelic_debug_init(); + udbg_putc = ps3gelic_udbg_putc; +} + +void udbg_shutdown_ps3gelic(void) +{ + udbg_putc = NULL; + gelic_debug_shutdown(); +} +EXPORT_SYMBOL(udbg_shutdown_ps3gelic); diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c index 23083c397528..688141c76e03 100644 --- a/arch/powerpc/platforms/ps3/system-bus.c +++ b/arch/powerpc/platforms/ps3/system-bus.c @@ -695,12 +695,18 @@ static int ps3_dma_supported(struct device *_dev, u64 mask) return mask >= DMA_BIT_MASK(32); } +static u64 ps3_dma_get_required_mask(struct device *_dev) +{ + return DMA_BIT_MASK(32); +} + static struct dma_map_ops ps3_sb_dma_ops = { .alloc_coherent = ps3_alloc_coherent, .free_coherent = ps3_free_coherent, .map_sg = ps3_sb_map_sg, .unmap_sg = ps3_sb_unmap_sg, .dma_supported = ps3_dma_supported, + .get_required_mask = ps3_dma_get_required_mask, .map_page = ps3_sb_map_page, .unmap_page = ps3_unmap_page, }; @@ -711,6 +717,7 @@ static struct dma_map_ops ps3_ioc0_dma_ops = { .map_sg = ps3_ioc0_map_sg, .unmap_sg = ps3_ioc0_unmap_sg, .dma_supported = ps3_dma_supported, + .get_required_mask = ps3_dma_get_required_mask, .map_page = ps3_ioc0_map_page, .unmap_page = ps3_unmap_page, }; diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 05cf4769b88c..c81f6bb9c10f 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -15,6 +15,7 @@ config PPC_PSERIES select PPC_UDBG_16550 select PPC_NATIVE select PPC_PCI_CHOICE if EXPERT + select ZLIB_DEFLATE default y config PPC_SPLPAR diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c index e9be25bc571b..0f1b706506ed 100644 --- a/arch/powerpc/platforms/pseries/dlpar.c +++ b/arch/powerpc/platforms/pseries/dlpar.c @@ -112,6 +112,7 @@ void dlpar_free_cc_nodes(struct device_node *dn) dlpar_free_one_cc_node(dn); } +#define COMPLETE 0 #define NEXT_SIBLING 1 #define NEXT_CHILD 2 #define NEXT_PROPERTY 3 @@ -158,6 +159,9 @@ struct device_node *dlpar_configure_connector(u32 drc_index) spin_unlock(&rtas_data_buf_lock); switch (rc) { + case COMPLETE: + break; + case NEXT_SIBLING: dn = dlpar_parse_cc_node(ccwa); if (!dn) diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index ada6e07532ec..d42f37d8a440 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -1338,7 +1338,7 @@ static const struct file_operations proc_eeh_operations = { static int __init eeh_init_proc(void) { if (machine_is(pseries)) - proc_create("ppc64/eeh", 0, NULL, &proc_eeh_operations); + proc_create("powerpc/eeh", 0, NULL, &proc_eeh_operations); return 0; } __initcall(eeh_init_proc); diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 01faab9456ca..5905a3b9f7e6 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -939,14 +939,14 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn) if (ret) { dev_info(&dev->dev, "failed to map direct window for %s: %d\n", dn->full_name, ret); - goto out_clear_window; + goto out_free_window; } ret = prom_add_property(pdn, win64); if (ret) { dev_err(&dev->dev, "unable to add dma window property for %s: %d", pdn->full_name, ret); - goto out_clear_window; + goto out_free_window; } window->device = pdn; @@ -958,6 +958,9 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn) dma_addr = of_read_number(&create.addr_hi, 2); goto out_unlock; +out_free_window: + kfree(window); + out_clear_window: remove_ddw(pdn); @@ -1077,12 +1080,38 @@ check_mask: return 0; } +static u64 dma_get_required_mask_pSeriesLP(struct device *dev) +{ + if (!dev->dma_mask) + return 0; + + if (!disable_ddw && dev_is_pci(dev)) { + struct pci_dev *pdev = to_pci_dev(dev); + struct device_node *dn; + + dn = pci_device_to_OF_node(pdev); + + /* search upwards for ibm,dma-window */ + for (; dn && PCI_DN(dn) && !PCI_DN(dn)->iommu_table; + dn = dn->parent) + if (of_get_property(dn, "ibm,dma-window", NULL)) + break; + /* if there is a ibm,ddw-applicable property require 64 bits */ + if (dn && PCI_DN(dn) && + of_get_property(dn, "ibm,ddw-applicable", NULL)) + return DMA_BIT_MASK(64); + } + + return dma_iommu_ops.get_required_mask(dev); +} + #else /* CONFIG_PCI */ #define pci_dma_bus_setup_pSeries NULL #define pci_dma_dev_setup_pSeries NULL #define pci_dma_bus_setup_pSeriesLP NULL #define pci_dma_dev_setup_pSeriesLP NULL #define dma_set_mask_pSeriesLP NULL +#define dma_get_required_mask_pSeriesLP NULL #endif /* !CONFIG_PCI */ static int iommu_mem_notifier(struct notifier_block *nb, unsigned long action, @@ -1186,6 +1215,7 @@ void iommu_init_early_pSeries(void) ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_pSeriesLP; ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_pSeriesLP; ppc_md.dma_set_mask = dma_set_mask_pSeriesLP; + ppc_md.dma_get_required_mask = dma_get_required_mask_pSeriesLP; } else { ppc_md.tce_build = tce_build_pSeries; ppc_md.tce_free = tce_free_pSeries; diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c index 00cc3a094885..a76b22844d18 100644 --- a/arch/powerpc/platforms/pseries/nvram.c +++ b/arch/powerpc/platforms/pseries/nvram.c @@ -18,6 +18,8 @@ #include <linux/spinlock.h> #include <linux/slab.h> #include <linux/kmsg_dump.h> +#include <linux/ctype.h> +#include <linux/zlib.h> #include <asm/uaccess.h> #include <asm/nvram.h> #include <asm/rtas.h> @@ -78,8 +80,41 @@ static struct kmsg_dumper nvram_kmsg_dumper = { #define NVRAM_RTAS_READ_TIMEOUT 5 /* seconds */ static unsigned long last_unread_rtas_event; /* timestamp */ -/* We preallocate oops_buf during init to avoid kmalloc during oops/panic. */ -static char *oops_buf; +/* + * For capturing and compressing an oops or panic report... + + * big_oops_buf[] holds the uncompressed text we're capturing. + * + * oops_buf[] holds the compressed text, preceded by a prefix. + * The prefix is just a u16 holding the length of the compressed* text. + * (*Or uncompressed, if compression fails.) oops_buf[] gets written + * to NVRAM. + * + * oops_len points to the prefix. oops_data points to the compressed text. + * + * +- oops_buf + * | +- oops_data + * v v + * +------------+-----------------------------------------------+ + * | length | text | + * | (2 bytes) | (oops_data_sz bytes) | + * +------------+-----------------------------------------------+ + * ^ + * +- oops_len + * + * We preallocate these buffers during init to avoid kmalloc during oops/panic. + */ +static size_t big_oops_buf_sz; +static char *big_oops_buf, *oops_buf; +static u16 *oops_len; +static char *oops_data; +static size_t oops_data_sz; + +/* Compression parameters */ +#define COMPR_LEVEL 6 +#define WINDOW_BITS 12 +#define MEM_LEVEL 4 +static struct z_stream_s stream; static ssize_t pSeries_nvram_read(char *buf, size_t count, loff_t *index) { @@ -387,11 +422,44 @@ static void __init nvram_init_oops_partition(int rtas_partition_exists) sizeof(rtas_log_partition)); } oops_buf = kmalloc(oops_log_partition.size, GFP_KERNEL); + if (!oops_buf) { + pr_err("nvram: No memory for %s partition\n", + oops_log_partition.name); + return; + } + oops_len = (u16*) oops_buf; + oops_data = oops_buf + sizeof(u16); + oops_data_sz = oops_log_partition.size - sizeof(u16); + + /* + * Figure compression (preceded by elimination of each line's <n> + * severity prefix) will reduce the oops/panic report to at most + * 45% of its original size. + */ + big_oops_buf_sz = (oops_data_sz * 100) / 45; + big_oops_buf = kmalloc(big_oops_buf_sz, GFP_KERNEL); + if (big_oops_buf) { + stream.workspace = kmalloc(zlib_deflate_workspacesize( + WINDOW_BITS, MEM_LEVEL), GFP_KERNEL); + if (!stream.workspace) { + pr_err("nvram: No memory for compression workspace; " + "skipping compression of %s partition data\n", + oops_log_partition.name); + kfree(big_oops_buf); + big_oops_buf = NULL; + } + } else { + pr_err("No memory for uncompressed %s data; " + "skipping compression\n", oops_log_partition.name); + stream.workspace = NULL; + } + rc = kmsg_dump_register(&nvram_kmsg_dumper); if (rc != 0) { pr_err("nvram: kmsg_dump_register() failed; returned %d\n", rc); kfree(oops_buf); - return; + kfree(big_oops_buf); + kfree(stream.workspace); } } @@ -473,7 +541,83 @@ static int clobbering_unread_rtas_event(void) NVRAM_RTAS_READ_TIMEOUT); } -/* our kmsg_dump callback */ +/* Squeeze out each line's <n> severity prefix. */ +static size_t elide_severities(char *buf, size_t len) +{ + char *in, *out, *buf_end = buf + len; + /* Assume a <n> at the very beginning marks the start of a line. */ + int newline = 1; + + in = out = buf; + while (in < buf_end) { + if (newline && in+3 <= buf_end && + *in == '<' && isdigit(in[1]) && in[2] == '>') { + in += 3; + newline = 0; + } else { + newline = (*in == '\n'); + *out++ = *in++; + } + } + return out - buf; +} + +/* Derived from logfs_compress() */ +static int nvram_compress(const void *in, void *out, size_t inlen, + size_t outlen) +{ + int err, ret; + + ret = -EIO; + err = zlib_deflateInit2(&stream, COMPR_LEVEL, Z_DEFLATED, WINDOW_BITS, + MEM_LEVEL, Z_DEFAULT_STRATEGY); + if (err != Z_OK) + goto error; + + stream.next_in = in; + stream.avail_in = inlen; + stream.total_in = 0; + stream.next_out = out; + stream.avail_out = outlen; + stream.total_out = 0; + + err = zlib_deflate(&stream, Z_FINISH); + if (err != Z_STREAM_END) + goto error; + + err = zlib_deflateEnd(&stream); + if (err != Z_OK) + goto error; + + if (stream.total_out >= stream.total_in) + goto error; + + ret = stream.total_out; +error: + return ret; +} + +/* Compress the text from big_oops_buf into oops_buf. */ +static int zip_oops(size_t text_len) +{ + int zipped_len = nvram_compress(big_oops_buf, oops_data, text_len, + oops_data_sz); + if (zipped_len < 0) { + pr_err("nvram: compression failed; returned %d\n", zipped_len); + pr_err("nvram: logging uncompressed oops/panic report\n"); + return -1; + } + *oops_len = (u16) zipped_len; + return 0; +} + +/* + * This is our kmsg_dump callback, called after an oops or panic report + * has been written to the printk buffer. We want to capture as much + * of the printk buffer as possible. First, capture as much as we can + * that we think will compress sufficiently to fit in the lnx,oops-log + * partition. If that's too much, go back and capture uncompressed text. + */ static void oops_to_nvram(struct kmsg_dumper *dumper, enum kmsg_dump_reason reason, const char *old_msgs, unsigned long old_len, @@ -482,6 +626,8 @@ static void oops_to_nvram(struct kmsg_dumper *dumper, static unsigned int oops_count = 0; static bool panicking = false; size_t text_len; + unsigned int err_type = ERR_TYPE_KERNEL_PANIC_GZ; + int rc = -1; switch (reason) { case KMSG_DUMP_RESTART: @@ -509,8 +655,19 @@ static void oops_to_nvram(struct kmsg_dumper *dumper, if (clobbering_unread_rtas_event()) return; - text_len = capture_last_msgs(old_msgs, old_len, new_msgs, new_len, - oops_buf, oops_log_partition.size); + if (big_oops_buf) { + text_len = capture_last_msgs(old_msgs, old_len, + new_msgs, new_len, big_oops_buf, big_oops_buf_sz); + text_len = elide_severities(big_oops_buf, text_len); + rc = zip_oops(text_len); + } + if (rc != 0) { + text_len = capture_last_msgs(old_msgs, old_len, + new_msgs, new_len, oops_data, oops_data_sz); + err_type = ERR_TYPE_KERNEL_PANIC; + *oops_len = (u16) text_len; + } + (void) nvram_write_os_partition(&oops_log_partition, oops_buf, - (int) text_len, ERR_TYPE_KERNEL_PANIC, ++oops_count); + (int) (sizeof(*oops_len) + *oops_len), err_type, ++oops_count); } diff --git a/arch/powerpc/platforms/wsp/Kconfig b/arch/powerpc/platforms/wsp/Kconfig index c3c48eb62cc1..f4fb837873fb 100644 --- a/arch/powerpc/platforms/wsp/Kconfig +++ b/arch/powerpc/platforms/wsp/Kconfig @@ -1,5 +1,12 @@ config PPC_WSP bool + select PPC_A2 + select PPC_SCOM + select PPC_XICS + select PPC_ICP_NATIVE + select PCI + select PPC_IO_WORKAROUNDS if PCI + select PPC_INDIRECT_PIO if PCI default n menu "WSP platform selection" @@ -7,13 +14,9 @@ menu "WSP platform selection" config PPC_PSR2 bool "PSR-2 platform" - select PPC_A2 select GENERIC_TBSYNC - select PPC_SCOM select EPAPR_BOOT select PPC_WSP - select PPC_XICS - select PPC_ICP_NATIVE default y endmenu diff --git a/arch/powerpc/platforms/wsp/Makefile b/arch/powerpc/platforms/wsp/Makefile index 095be73d6cd4..a1486b436f02 100644 --- a/arch/powerpc/platforms/wsp/Makefile +++ b/arch/powerpc/platforms/wsp/Makefile @@ -4,3 +4,5 @@ obj-y += setup.o ics.o obj-$(CONFIG_PPC_PSR2) += psr2.o opb_pic.o obj-$(CONFIG_PPC_WSP) += scom_wsp.o obj-$(CONFIG_SMP) += smp.o scom_smp.o +obj-$(CONFIG_PCI) += wsp_pci.o +obj-$(CONFIG_PCI_MSI) += msi.o \ No newline at end of file diff --git a/arch/powerpc/platforms/wsp/ics.c b/arch/powerpc/platforms/wsp/ics.c index e53bd9e7b125..576874392543 100644 --- a/arch/powerpc/platforms/wsp/ics.c +++ b/arch/powerpc/platforms/wsp/ics.c @@ -710,3 +710,51 @@ void __init wsp_init_irq(void) /* We need to patch our irq chip's EOI to point to the right ICP */ wsp_irq_chip.irq_eoi = icp_ops->eoi; } + +#ifdef CONFIG_PCI_MSI +static void wsp_ics_msi_unmask_irq(struct irq_data *d) +{ + wsp_chip_unmask_irq(d); + unmask_msi_irq(d); +} + +static unsigned int wsp_ics_msi_startup(struct irq_data *d) +{ + wsp_ics_msi_unmask_irq(d); + return 0; +} + +static void wsp_ics_msi_mask_irq(struct irq_data *d) +{ + mask_msi_irq(d); + wsp_chip_mask_irq(d); +} + +/* + * we do it this way because we reassinge default EOI handling in + * irq_init() above + */ +static void wsp_ics_eoi(struct irq_data *data) +{ + wsp_irq_chip.irq_eoi(data); +} + +static struct irq_chip wsp_ics_msi = { + .name = "WSP ICS MSI", + .irq_startup = wsp_ics_msi_startup, + .irq_mask = wsp_ics_msi_mask_irq, + .irq_unmask = wsp_ics_msi_unmask_irq, + .irq_eoi = wsp_ics_eoi, + .irq_set_affinity = wsp_chip_set_affinity +}; + +void wsp_ics_set_msi_chip(unsigned int irq) +{ + irq_set_chip(irq, &wsp_ics_msi); +} + +void wsp_ics_set_std_chip(unsigned int irq) +{ + irq_set_chip(irq, &wsp_irq_chip); +} +#endif /* CONFIG_PCI_MSI */ diff --git a/arch/powerpc/platforms/wsp/ics.h b/arch/powerpc/platforms/wsp/ics.h index e34d53102640..07b644e0cf97 100644 --- a/arch/powerpc/platforms/wsp/ics.h +++ b/arch/powerpc/platforms/wsp/ics.h @@ -17,4 +17,9 @@ extern void wsp_init_irq(void); extern int wsp_ics_alloc_irq(struct device_node *dn, int num); extern void wsp_ics_free_irq(struct device_node *dn, unsigned int irq); +#ifdef CONFIG_PCI_MSI +extern void wsp_ics_set_msi_chip(unsigned int irq); +extern void wsp_ics_set_std_chip(unsigned int irq); +#endif /* CONFIG_PCI_MSI */ + #endif /* __ICS_H */ diff --git a/arch/powerpc/platforms/wsp/msi.c b/arch/powerpc/platforms/wsp/msi.c new file mode 100644 index 000000000000..380882f27add --- /dev/null +++ b/arch/powerpc/platforms/wsp/msi.c @@ -0,0 +1,102 @@ +/* + * Copyright 2011 Michael Ellerman, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/msi.h> +#include <linux/irq.h> +#include <linux/interrupt.h> + +#include "msi.h" +#include "ics.h" +#include "wsp_pci.h" + +/* Magic addresses for 32 & 64-bit MSIs with hardcoded MVE 0 */ +#define MSI_ADDR_32 0xFFFF0000ul +#define MSI_ADDR_64 0x1000000000000000ul + +int wsp_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) +{ + struct pci_controller *phb; + struct msi_desc *entry; + struct msi_msg msg; + unsigned int virq; + int hwirq; + + phb = pci_bus_to_host(dev->bus); + if (!phb) + return -ENOENT; + + entry = list_first_entry(&dev->msi_list, struct msi_desc, list); + if (entry->msi_attrib.is_64) { + msg.address_lo = 0; + msg.address_hi = MSI_ADDR_64 >> 32; + } else { + msg.address_lo = MSI_ADDR_32; + msg.address_hi = 0; + } + + list_for_each_entry(entry, &dev->msi_list, list) { + hwirq = wsp_ics_alloc_irq(phb->dn, 1); + if (hwirq < 0) { + dev_warn(&dev->dev, "wsp_msi: hwirq alloc failed!\n"); + return hwirq; + } + + virq = irq_create_mapping(NULL, hwirq); + if (virq == NO_IRQ) { + dev_warn(&dev->dev, "wsp_msi: virq alloc failed!\n"); + return -1; + } + + dev_dbg(&dev->dev, "wsp_msi: allocated irq %#x/%#x\n", + hwirq, virq); + + wsp_ics_set_msi_chip(virq); + irq_set_msi_desc(virq, entry); + msg.data = hwirq & XIVE_ADDR_MASK; + write_msi_msg(virq, &msg); + } + + return 0; +} + +void wsp_teardown_msi_irqs(struct pci_dev *dev) +{ + struct pci_controller *phb; + struct msi_desc *entry; + int hwirq; + + phb = pci_bus_to_host(dev->bus); + + dev_dbg(&dev->dev, "wsp_msi: tearing down msi irqs\n"); + + list_for_each_entry(entry, &dev->msi_list, list) { + if (entry->irq == NO_IRQ) + continue; + + irq_set_msi_desc(entry->irq, NULL); + wsp_ics_set_std_chip(entry->irq); + + hwirq = virq_to_hw(entry->irq); + /* In this order to avoid racing with irq_create_mapping() */ + irq_dispose_mapping(entry->irq); + wsp_ics_free_irq(phb->dn, hwirq); + } +} + +void wsp_setup_phb_msi(struct pci_controller *phb) +{ + /* Create a single MVE at offset 0 that matches everything */ + out_be64(phb->cfg_data + PCIE_REG_IODA_ADDR, PCIE_REG_IODA_AD_TBL_MVT); + out_be64(phb->cfg_data + PCIE_REG_IODA_DATA0, 1ull << 63); + + ppc_md.setup_msi_irqs = wsp_setup_msi_irqs; + ppc_md.teardown_msi_irqs = wsp_teardown_msi_irqs; +} diff --git a/arch/powerpc/platforms/wsp/msi.h b/arch/powerpc/platforms/wsp/msi.h new file mode 100644 index 000000000000..0ab27b71b24d --- /dev/null +++ b/arch/powerpc/platforms/wsp/msi.h @@ -0,0 +1,19 @@ +/* + * Copyright 2011 Michael Ellerman, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __WSP_MSI_H +#define __WSP_MSI_H + +#ifdef CONFIG_PCI_MSI +extern void wsp_setup_phb_msi(struct pci_controller *phb); +#else +static inline void wsp_setup_phb_msi(struct pci_controller *phb) { } +#endif + +#endif /* __WSP_MSI_H */ diff --git a/arch/powerpc/platforms/wsp/psr2.c b/arch/powerpc/platforms/wsp/psr2.c index 40f28916ff6c..166f2e4b4bee 100644 --- a/arch/powerpc/platforms/wsp/psr2.c +++ b/arch/powerpc/platforms/wsp/psr2.c @@ -63,6 +63,10 @@ static void __init psr2_setup_arch(void) #ifdef CONFIG_SMP a2_setup_smp(); #endif +#ifdef CONFIG_PCI + wsp_setup_pci(); +#endif + } static int __init psr2_probe(void) diff --git a/arch/powerpc/platforms/wsp/wsp.h b/arch/powerpc/platforms/wsp/wsp.h index 7c3e087fd2f2..33479818f62a 100644 --- a/arch/powerpc/platforms/wsp/wsp.h +++ b/arch/powerpc/platforms/wsp/wsp.h @@ -3,6 +3,9 @@ #include <asm/wsp.h> +/* Devtree compatible strings for major devices */ +#define PCIE_COMPATIBLE "ibm,wsp-pciex" + extern void wsp_setup_pci(void); extern void scom_init_wsp(void); diff --git a/arch/powerpc/platforms/wsp/wsp_pci.c b/arch/powerpc/platforms/wsp/wsp_pci.c new file mode 100644 index 000000000000..e0262cd0e2d3 --- /dev/null +++ b/arch/powerpc/platforms/wsp/wsp_pci.c @@ -0,0 +1,1133 @@ +/* + * Copyright 2010 Ben Herrenschmidt, IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define DEBUG + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/debugfs.h> + +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> +#include <asm/ppc-pci.h> +#include <asm/iommu.h> +#include <asm/io-workarounds.h> + +#include "wsp.h" +#include "wsp_pci.h" +#include "msi.h" + + +/* Max number of TVTs for one table. Only 32-bit tables can use + * multiple TVTs and so the max currently supported is thus 8 + * since only 2G of DMA space is supported + */ +#define MAX_TABLE_TVT_COUNT 8 + +struct wsp_dma_table { + struct list_head link; + struct iommu_table table; + struct wsp_phb *phb; + struct page *tces[MAX_TABLE_TVT_COUNT]; +}; + +/* We support DMA regions from 0...2G in 32bit space (no support for + * 64-bit DMA just yet). Each device gets a separate TCE table (TVT + * entry) with validation enabled (though not supported by SimiCS + * just yet). + * + * To simplify things, we divide this 2G space into N regions based + * on the constant below which could be turned into a tunable eventually + * + * We then assign dynamically those regions to devices as they show up. + * + * We use a bitmap as an allocator for these. + * + * Tables are allocated/created dynamically as devices are discovered, + * multiple TVT entries are used if needed + * + * When 64-bit DMA support is added we should simply use a separate set + * of larger regions (the HW supports 64 TVT entries). We can + * additionally create a bypass region in 64-bit space for performances + * though that would have a cost in term of security. + * + * If you set NUM_DMA32_REGIONS to 1, then a single table is shared + * for all devices and bus/dev/fn validation is disabled + * + * Note that a DMA32 region cannot be smaller than 256M so the max + * supported here for now is 8. We don't yet support sharing regions + * between multiple devices so the max number of devices supported + * is MAX_TABLE_TVT_COUNT. + */ +#define NUM_DMA32_REGIONS 1 + +struct wsp_phb { + struct pci_controller *hose; + + /* Lock controlling access to the list of dma tables. + * It does -not- protect against dma_* operations on + * those tables, those should be stopped before an entry + * is removed from the list. + * + * The lock is also used for error handling operations + */ + spinlock_t lock; + struct list_head dma_tables; + unsigned long dma32_map; + unsigned long dma32_base; + unsigned int dma32_num_regions; + unsigned long dma32_region_size; + + /* Debugfs stuff */ + struct dentry *ddir; + + struct list_head all; +}; +static LIST_HEAD(wsp_phbs); + +//#define cfg_debug(fmt...) pr_debug(fmt) +#define cfg_debug(fmt...) + + +static int wsp_pcie_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + int suboff; + u64 addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + if (offset >= 0x1000) + return PCIBIOS_BAD_REGISTER_NUMBER; + addr = PCIE_REG_CA_ENABLE | + ((u64)bus->number) << PCIE_REG_CA_BUS_SHIFT | + ((u64)devfn) << PCIE_REG_CA_FUNC_SHIFT | + ((u64)offset & ~3) << PCIE_REG_CA_REG_SHIFT; + suboff = offset & 3; + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + + switch (len) { + case 1: + addr |= (0x8ul >> suboff) << PCIE_REG_CA_BE_SHIFT; + out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr); + *val = (in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA) + >> (suboff << 3)) & 0xff; + cfg_debug("read 1 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%02x\n", + bus->number, devfn >> 3, devfn & 7, + offset, suboff, addr, *val); + break; + case 2: + addr |= (0xcul >> suboff) << PCIE_REG_CA_BE_SHIFT; + out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr); + *val = (in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA) + >> (suboff << 3)) & 0xffff; + cfg_debug("read 2 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%04x\n", + bus->number, devfn >> 3, devfn & 7, + offset, suboff, addr, *val); + break; + default: + addr |= 0xful << PCIE_REG_CA_BE_SHIFT; + out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr); + *val = in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA); + cfg_debug("read 4 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%08x\n", + bus->number, devfn >> 3, devfn & 7, + offset, suboff, addr, *val); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int wsp_pcie_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose; + int suboff; + u64 addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + if (offset >= 0x1000) + return PCIBIOS_BAD_REGISTER_NUMBER; + addr = PCIE_REG_CA_ENABLE | + ((u64)bus->number) << PCIE_REG_CA_BUS_SHIFT | + ((u64)devfn) << PCIE_REG_CA_FUNC_SHIFT | + ((u64)offset & ~3) << PCIE_REG_CA_REG_SHIFT; + suboff = offset & 3; + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + addr |= (0x8ul >> suboff) << PCIE_REG_CA_BE_SHIFT; + val <<= suboff << 3; + out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr); + out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val); + cfg_debug("write 1 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%02x\n", + bus->number, devfn >> 3, devfn & 7, + offset, suboff, addr, val); + break; + case 2: + addr |= (0xcul >> suboff) << PCIE_REG_CA_BE_SHIFT; + val <<= suboff << 3; + out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr); + out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val); + cfg_debug("write 2 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%04x\n", + bus->number, devfn >> 3, devfn & 7, + offset, suboff, addr, val); + break; + default: + addr |= 0xful << PCIE_REG_CA_BE_SHIFT; + out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr); + out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val); + cfg_debug("write 4 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%08x\n", + bus->number, devfn >> 3, devfn & 7, + offset, suboff, addr, val); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops wsp_pcie_pci_ops = +{ + .read = wsp_pcie_read_config, + .write = wsp_pcie_write_config, +}; + +#define TCE_SHIFT 12 +#define TCE_PAGE_SIZE (1 << TCE_SHIFT) +#define TCE_PCI_WRITE 0x2 /* write from PCI allowed */ +#define TCE_PCI_READ 0x1 /* read from PCI allowed */ +#define TCE_RPN_MASK 0x3fffffffffful /* 42-bit RPN (4K pages) */ +#define TCE_RPN_SHIFT 12 + +//#define dma_debug(fmt...) pr_debug(fmt) +#define dma_debug(fmt...) + +static int tce_build_wsp(struct iommu_table *tbl, long index, long npages, + unsigned long uaddr, enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct wsp_dma_table *ptbl = container_of(tbl, + struct wsp_dma_table, + table); + u64 proto_tce; + u64 *tcep; + u64 rpn; + + proto_tce = TCE_PCI_READ; +#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS + proto_tce |= TCE_PCI_WRITE; +#else + if (direction != DMA_TO_DEVICE) + proto_tce |= TCE_PCI_WRITE; +#endif + + /* XXX Make this faster by factoring out the page address for + * within a TCE table + */ + while (npages--) { + /* We don't use it->base as the table can be scattered */ + tcep = (u64 *)page_address(ptbl->tces[index >> 16]); + tcep += (index & 0xffff); + + /* can't move this out since we might cross LMB boundary */ + rpn = __pa(uaddr) >> TCE_SHIFT; + *tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT; + + dma_debug("[DMA] TCE %p set to 0x%016llx (dma addr: 0x%lx)\n", + tcep, *tcep, (tbl->it_offset + index) << IOMMU_PAGE_SHIFT); + + uaddr += TCE_PAGE_SIZE; + index++; + } + return 0; +} + +static void tce_free_wsp(struct iommu_table *tbl, long index, long npages) +{ + struct wsp_dma_table *ptbl = container_of(tbl, + struct wsp_dma_table, + table); +#ifndef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS + struct pci_controller *hose = ptbl->phb->hose; +#endif + u64 *tcep; + + /* XXX Make this faster by factoring out the page address for + * within a TCE table. Also use line-kill option to kill multiple + * TCEs at once + */ + while (npages--) { + /* We don't use it->base as the table can be scattered */ + tcep = (u64 *)page_address(ptbl->tces[index >> 16]); + tcep += (index & 0xffff); + dma_debug("[DMA] TCE %p cleared\n", tcep); + *tcep = 0; +#ifndef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS + /* Don't write there since it would pollute other MMIO accesses */ + out_be64(hose->cfg_data + PCIE_REG_TCE_KILL, + PCIE_REG_TCEKILL_SINGLE | PCIE_REG_TCEKILL_PS_4K | + (__pa(tcep) & PCIE_REG_TCEKILL_ADDR_MASK)); +#endif + index++; + } +} + +static struct wsp_dma_table *wsp_pci_create_dma32_table(struct wsp_phb *phb, + unsigned int region, + struct pci_dev *validate) +{ + struct pci_controller *hose = phb->hose; + unsigned long size = phb->dma32_region_size; + unsigned long addr = phb->dma32_region_size * region + phb->dma32_base; + struct wsp_dma_table *tbl; + int tvts_per_table, i, tvt, nid; + unsigned long flags; + + nid = of_node_to_nid(phb->hose->dn); + + /* Calculate how many TVTs are needed */ + tvts_per_table = size / 0x10000000; + if (tvts_per_table == 0) + tvts_per_table = 1; + + /* Calculate the base TVT index. We know all tables have the same + * size so we just do a simple multiply here + */ + tvt = region * tvts_per_table; + + pr_debug(" Region : %d\n", region); + pr_debug(" DMA range : 0x%08lx..0x%08lx\n", addr, addr + size - 1); + pr_debug(" Number of TVTs : %d\n", tvts_per_table); + pr_debug(" Base TVT : %d\n", tvt); + pr_debug(" Node : %d\n", nid); + + tbl = kzalloc_node(sizeof(struct wsp_dma_table), GFP_KERNEL, nid); + if (!tbl) + return ERR_PTR(-ENOMEM); + tbl->phb = phb; + + /* Create as many TVTs as needed, each represents 256M at most */ + for (i = 0; i < tvts_per_table; i++) { + u64 tvt_data1, tvt_data0; + + /* Allocate table. We use a 4K TCE size for now always so + * one table is always 8 * (258M / 4K) == 512K + */ + tbl->tces[i] = alloc_pages_node(nid, GFP_KERNEL, get_order(0x80000)); + if (tbl->tces[i] == NULL) + goto fail; + memset(page_address(tbl->tces[i]), 0, 0x80000); + + pr_debug(" TCE table %d at : %p\n", i, page_address(tbl->tces[i])); + + /* Table size. We currently set it to be the whole 256M region */ + tvt_data0 = 2ull << IODA_TVT0_TCE_TABLE_SIZE_SHIFT; + /* IO page size set to 4K */ + tvt_data1 = 1ull << IODA_TVT1_IO_PAGE_SIZE_SHIFT; + /* Shift in the address */ + tvt_data0 |= __pa(page_address(tbl->tces[i])) << IODA_TVT0_TTA_SHIFT; + + /* Validation stuff. We only validate fully bus/dev/fn for now + * one day maybe we can group devices but that isn't the case + * at the moment + */ + if (validate) { + tvt_data0 |= IODA_TVT0_BUSNUM_VALID_MASK; + tvt_data0 |= validate->bus->number; + tvt_data1 |= IODA_TVT1_DEVNUM_VALID; + tvt_data1 |= ((u64)PCI_SLOT(validate->devfn)) + << IODA_TVT1_DEVNUM_VALUE_SHIFT; + tvt_data1 |= IODA_TVT1_FUNCNUM_VALID; + tvt_data1 |= ((u64)PCI_FUNC(validate->devfn)) + << IODA_TVT1_FUNCNUM_VALUE_SHIFT; + } + + /* XX PE number is always 0 for now */ + + /* Program the values using the PHB lock */ + spin_lock_irqsave(&phb->lock, flags); + out_be64(hose->cfg_data + PCIE_REG_IODA_ADDR, + (tvt + i) | PCIE_REG_IODA_AD_TBL_TVT); + out_be64(hose->cfg_data + PCIE_REG_IODA_DATA1, tvt_data1); + out_be64(hose->cfg_data + PCIE_REG_IODA_DATA0, tvt_data0); + spin_unlock_irqrestore(&phb->lock, flags); + } + + /* Init bits and pieces */ + tbl->table.it_blocksize = 16; + tbl->table.it_offset = addr >> IOMMU_PAGE_SHIFT; + tbl->table.it_size = size >> IOMMU_PAGE_SHIFT; + + /* + * It's already blank but we clear it anyway. + * Consider an aditiona interface that makes cleaing optional + */ + iommu_init_table(&tbl->table, nid); + + list_add(&tbl->link, &phb->dma_tables); + return tbl; + + fail: + pr_debug(" Failed to allocate a 256M TCE table !\n"); + for (i = 0; i < tvts_per_table; i++) + if (tbl->tces[i]) + __free_pages(tbl->tces[i], get_order(0x80000)); + kfree(tbl); + return ERR_PTR(-ENOMEM); +} + +static void __devinit wsp_pci_dma_dev_setup(struct pci_dev *pdev) +{ + struct dev_archdata *archdata = &pdev->dev.archdata; + struct pci_controller *hose = pci_bus_to_host(pdev->bus); + struct wsp_phb *phb = hose->private_data; + struct wsp_dma_table *table = NULL; + unsigned long flags; + int i; + + /* Don't assign an iommu table to a bridge */ + if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) + return; + + pr_debug("%s: Setting up DMA...\n", pci_name(pdev)); + + spin_lock_irqsave(&phb->lock, flags); + + /* If only one region, check if it already exist */ + if (phb->dma32_num_regions == 1) { + spin_unlock_irqrestore(&phb->lock, flags); + if (list_empty(&phb->dma_tables)) + table = wsp_pci_create_dma32_table(phb, 0, NULL); + else + table = list_first_entry(&phb->dma_tables, + struct wsp_dma_table, + link); + } else { + /* else find a free region */ + for (i = 0; i < phb->dma32_num_regions && !table; i++) { + if (__test_and_set_bit(i, &phb->dma32_map)) + continue; + spin_unlock_irqrestore(&phb->lock, flags); + table = wsp_pci_create_dma32_table(phb, i, pdev); + } + } + + /* Check if we got an error */ + if (IS_ERR(table)) { + pr_err("%s: Failed to create DMA table, err %ld !\n", + pci_name(pdev), PTR_ERR(table)); + return; + } + + /* Or a valid table */ + if (table) { + pr_info("%s: Setup iommu: 32-bit DMA region 0x%08lx..0x%08lx\n", + pci_name(pdev), + table->table.it_offset << IOMMU_PAGE_SHIFT, + (table->table.it_offset << IOMMU_PAGE_SHIFT) + + phb->dma32_region_size - 1); + archdata->dma_data.iommu_table_base = &table->table; + return; + } + + /* Or no room */ + spin_unlock_irqrestore(&phb->lock, flags); + pr_err("%s: Out of DMA space !\n", pci_name(pdev)); +} + +static void __init wsp_pcie_configure_hw(struct pci_controller *hose) +{ + u64 val; + int i; + +#define DUMP_REG(x) \ + pr_debug("%-30s : 0x%016llx\n", #x, in_be64(hose->cfg_data + x)) + +#ifdef CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS + /* WSP DD1 has a bogus class code by default in the PCI-E + * root complex's built-in P2P bridge */ + val = in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1); + pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", val); + out_be64(hose->cfg_data + PCIE_REG_SYS_CFG1, + (val & ~PCIE_REG_SYS_CFG1_CLASS_CODE) | (PCI_CLASS_BRIDGE_PCI << 8)); + pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1)); +#endif /* CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS */ + +#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS + /* XXX Disable TCE caching, it doesn't work on DD1 */ + out_be64(hose->cfg_data + 0xe50, + in_be64(hose->cfg_data + 0xe50) | (3ull << 62)); + printk("PCI-E DEBUG CONTROL 5 = 0x%llx\n", in_be64(hose->cfg_data + 0xe50)); +#endif + + /* Configure M32A and IO. IO is hard wired to be 1M for now */ + out_be64(hose->cfg_data + PCIE_REG_IO_BASE_ADDR, hose->io_base_phys); + out_be64(hose->cfg_data + PCIE_REG_IO_BASE_MASK, + (~(hose->io_resource.end - hose->io_resource.start)) & + 0x3fffffff000ul); + out_be64(hose->cfg_data + PCIE_REG_IO_START_ADDR, 0 | 1); + + out_be64(hose->cfg_data + PCIE_REG_M32A_BASE_ADDR, + hose->mem_resources[0].start); + printk("Want to write to M32A_BASE_MASK : 0x%llx\n", + (~(hose->mem_resources[0].end - + hose->mem_resources[0].start)) & 0x3ffffff0000ul); + out_be64(hose->cfg_data + PCIE_REG_M32A_BASE_MASK, + (~(hose->mem_resources[0].end - + hose->mem_resources[0].start)) & 0x3ffffff0000ul); + out_be64(hose->cfg_data + PCIE_REG_M32A_START_ADDR, + (hose->mem_resources[0].start - hose->pci_mem_offset) | 1); + + /* Clear all TVT entries + * + * XX Might get TVT count from device-tree + */ + for (i = 0; i < IODA_TVT_COUNT; i++) { + out_be64(hose->cfg_data + PCIE_REG_IODA_ADDR, + PCIE_REG_IODA_AD_TBL_TVT | i); + out_be64(hose->cfg_data + PCIE_REG_IODA_DATA1, 0); + out_be64(hose->cfg_data + PCIE_REG_IODA_DATA0, 0); + } + + /* Kill the TCE cache */ + out_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG, + in_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG) | + PCIE_REG_PHBC_64B_TCE_EN); + + /* Enable 32 & 64-bit MSIs, IO space and M32A */ + val = PCIE_REG_PHBC_32BIT_MSI_EN | + PCIE_REG_PHBC_IO_EN | + PCIE_REG_PHBC_64BIT_MSI_EN | + PCIE_REG_PHBC_M32A_EN; + if (iommu_is_off) + val |= PCIE_REG_PHBC_DMA_XLATE_BYPASS; + pr_debug("Will write config: 0x%llx\n", val); + out_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG, val); + + /* Enable error reporting */ + out_be64(hose->cfg_data + 0xe00, + in_be64(hose->cfg_data + 0xe00) | 0x0008000000000000ull); + + /* Mask an error that's generated when doing config space probe + * + * XXX Maybe we should only mask it around config space cycles... that or + * ignore it when we know we had a config space cycle recently ? + */ + out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS_MASK, 0x8000000000000000ull); + out_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS_MASK, 0x8000000000000000ull); + + /* Enable UTL errors, for now, all of them got to UTL irq 1 + * + * We similarily mask one UTL error caused apparently during normal + * probing. We also mask the link up error + */ + out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_ERR_SEV, 0); + out_be64(hose->cfg_data + PCIE_UTL_RC_ERR_SEVERITY, 0); + out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_ERROR_SEV, 0); + out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_IRQ_EN, 0xffffffff00000000ull); + out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_IRQ_EN, 0xff5fffff00000000ull); + out_be64(hose->cfg_data + PCIE_UTL_EP_ERR_IRQ_EN, 0xffffffff00000000ull); + + DUMP_REG(PCIE_REG_IO_BASE_ADDR); + DUMP_REG(PCIE_REG_IO_BASE_MASK); + DUMP_REG(PCIE_REG_IO_START_ADDR); + DUMP_REG(PCIE_REG_M32A_BASE_ADDR); + DUMP_REG(PCIE_REG_M32A_BASE_MASK); + DUMP_REG(PCIE_REG_M32A_START_ADDR); + DUMP_REG(PCIE_REG_M32B_BASE_ADDR); + DUMP_REG(PCIE_REG_M32B_BASE_MASK); + DUMP_REG(PCIE_REG_M32B_START_ADDR); + DUMP_REG(PCIE_REG_M64_BASE_ADDR); + DUMP_REG(PCIE_REG_M64_BASE_MASK); + DUMP_REG(PCIE_REG_M64_START_ADDR); + DUMP_REG(PCIE_REG_PHB_CONFIG); +} + +static void wsp_pci_wait_io_idle(struct wsp_phb *phb, unsigned long port) +{ + u64 val; + int i; + + for (i = 0; i < 10000; i++) { + val = in_be64(phb->hose->cfg_data + 0xe08); + if ((val & 0x1900000000000000ull) == 0x0100000000000000ull) + return; + udelay(1); + } + pr_warning("PCI IO timeout on domain %d port 0x%lx\n", + phb->hose->global_number, port); +} + +#define DEF_PCI_AC_RET_pio(name, ret, at, al, aa) \ +static ret wsp_pci_##name at \ +{ \ + struct iowa_bus *bus; \ + struct wsp_phb *phb; \ + unsigned long flags; \ + ret rval; \ + bus = iowa_pio_find_bus(aa); \ + WARN_ON(!bus); \ + phb = bus->private; \ + spin_lock_irqsave(&phb->lock, flags); \ + wsp_pci_wait_io_idle(phb, aa); \ + rval = __do_##name al; \ + spin_unlock_irqrestore(&phb->lock, flags); \ + return rval; \ +} + +#define DEF_PCI_AC_NORET_pio(name, at, al, aa) \ +static void wsp_pci_##name at \ +{ \ + struct iowa_bus *bus; \ + struct wsp_phb *phb; \ + unsigned long flags; \ + bus = iowa_pio_find_bus(aa); \ + WARN_ON(!bus); \ + phb = bus->private; \ + spin_lock_irqsave(&phb->lock, flags); \ + wsp_pci_wait_io_idle(phb, aa); \ + __do_##name al; \ + spin_unlock_irqrestore(&phb->lock, flags); \ +} + +#define DEF_PCI_AC_RET_mem(name, ret, at, al, aa) +#define DEF_PCI_AC_NORET_mem(name, at, al, aa) + +#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \ + DEF_PCI_AC_RET_##space(name, ret, at, al, aa) + +#define DEF_PCI_AC_NORET(name, at, al, space, aa) \ + DEF_PCI_AC_NORET_##space(name, at, al, aa) \ + + +#include <asm/io-defs.h> + +#undef DEF_PCI_AC_RET +#undef DEF_PCI_AC_NORET + +static struct ppc_pci_io wsp_pci_iops = { + .inb = wsp_pci_inb, + .inw = wsp_pci_inw, + .inl = wsp_pci_inl, + .outb = wsp_pci_outb, + .outw = wsp_pci_outw, + .outl = wsp_pci_outl, + .insb = wsp_pci_insb, + .insw = wsp_pci_insw, + .insl = wsp_pci_insl, + .outsb = wsp_pci_outsb, + .outsw = wsp_pci_outsw, + .outsl = wsp_pci_outsl, +}; + +static int __init wsp_setup_one_phb(struct device_node *np) +{ + struct pci_controller *hose; + struct wsp_phb *phb; + + pr_info("PCI: Setting up PCIe host bridge 0x%s\n", np->full_name); + + phb = zalloc_maybe_bootmem(sizeof(struct wsp_phb), GFP_KERNEL); + if (!phb) + return -ENOMEM; + hose = pcibios_alloc_controller(np); + if (!hose) { + /* Can't really free the phb */ + return -ENOMEM; + } + hose->private_data = phb; + phb->hose = hose; + + INIT_LIST_HEAD(&phb->dma_tables); + spin_lock_init(&phb->lock); + + /* XXX Use bus-range property ? */ + hose->first_busno = 0; + hose->last_busno = 0xff; + + /* We use cfg_data as the address for the whole bridge MMIO space + */ + hose->cfg_data = of_iomap(hose->dn, 0); + + pr_debug("PCIe registers mapped at 0x%p\n", hose->cfg_data); + + /* Get the ranges of the device-tree */ + pci_process_bridge_OF_ranges(hose, np, 0); + + /* XXX Force re-assigning of everything for now */ + pci_add_flags(PCI_REASSIGN_ALL_BUS | PCI_REASSIGN_ALL_RSRC | + PCI_ENABLE_PROC_DOMAINS); + pci_probe_only = 0; + + /* Calculate how the TCE space is divided */ + phb->dma32_base = 0; + phb->dma32_num_regions = NUM_DMA32_REGIONS; + if (phb->dma32_num_regions > MAX_TABLE_TVT_COUNT) { + pr_warning("IOMMU: Clamped to %d DMA32 regions\n", + MAX_TABLE_TVT_COUNT); + phb->dma32_num_regions = MAX_TABLE_TVT_COUNT; + } + phb->dma32_region_size = 0x80000000 / phb->dma32_num_regions; + + BUG_ON(!is_power_of_2(phb->dma32_region_size)); + + /* Setup config ops */ + hose->ops = &wsp_pcie_pci_ops; + + /* Configure the HW */ + wsp_pcie_configure_hw(hose); + + /* Instanciate IO workarounds */ + iowa_register_bus(hose, &wsp_pci_iops, NULL, phb); +#ifdef CONFIG_PCI_MSI + wsp_setup_phb_msi(hose); +#endif + + /* Add to global list */ + list_add(&phb->all, &wsp_phbs); + + return 0; +} + +void __init wsp_setup_pci(void) +{ + struct device_node *np; + int rc; + + /* Find host bridges */ + for_each_compatible_node(np, "pciex", PCIE_COMPATIBLE) { + rc = wsp_setup_one_phb(np); + if (rc) + pr_err("Failed to setup PCIe bridge %s, rc=%d\n", + np->full_name, rc); + } + + /* Establish device-tree linkage */ + pci_devs_phb_init(); + + /* Set DMA ops to use TCEs */ + if (iommu_is_off) { + pr_info("PCI-E: Disabled TCEs, using direct DMA\n"); + set_pci_dma_ops(&dma_direct_ops); + } else { + ppc_md.pci_dma_dev_setup = wsp_pci_dma_dev_setup; + ppc_md.tce_build = tce_build_wsp; + ppc_md.tce_free = tce_free_wsp; + set_pci_dma_ops(&dma_iommu_ops); + } +} + +#define err_debug(fmt...) pr_debug(fmt) +//#define err_debug(fmt...) + +static int __init wsp_pci_get_err_irq_no_dt(struct device_node *np) +{ + const u32 *prop; + int hw_irq; + + /* Ok, no interrupts property, let's try to find our child P2P */ + np = of_get_next_child(np, NULL); + if (np == NULL) + return 0; + + /* Grab it's interrupt map */ + prop = of_get_property(np, "interrupt-map", NULL); + if (prop == NULL) + return 0; + + /* Grab one of the interrupts in there, keep the low 4 bits */ + hw_irq = prop[5] & 0xf; + + /* 0..4 for PHB 0 and 5..9 for PHB 1 */ + if (hw_irq < 5) + hw_irq = 4; + else + hw_irq = 9; + hw_irq |= prop[5] & ~0xf; + + err_debug("PCI: Using 0x%x as error IRQ for %s\n", + hw_irq, np->parent->full_name); + return irq_create_mapping(NULL, hw_irq); +} + +static const struct { + u32 offset; + const char *name; +} wsp_pci_regs[] = { +#define DREG(x) { PCIE_REG_##x, #x } +#define DUTL(x) { PCIE_UTL_##x, "UTL_" #x } + /* Architected registers except CONFIG_ and IODA + * to avoid side effects + */ + DREG(DMA_CHAN_STATUS), + DREG(CPU_LOADSTORE_STATUS), + DREG(LOCK0), + DREG(LOCK1), + DREG(PHB_CONFIG), + DREG(IO_BASE_ADDR), + DREG(IO_BASE_MASK), + DREG(IO_START_ADDR), + DREG(M32A_BASE_ADDR), + DREG(M32A_BASE_MASK), + DREG(M32A_START_ADDR), + DREG(M32B_BASE_ADDR), + DREG(M32B_BASE_MASK), + DREG(M32B_START_ADDR), + DREG(M64_BASE_ADDR), + DREG(M64_BASE_MASK), + DREG(M64_START_ADDR), + DREG(TCE_KILL), + DREG(LOCK2), + DREG(PHB_GEN_CAP), + DREG(PHB_TCE_CAP), + DREG(PHB_IRQ_CAP), + DREG(PHB_EEH_CAP), + DREG(PAPR_ERR_INJ_CONTROL), + DREG(PAPR_ERR_INJ_ADDR), + DREG(PAPR_ERR_INJ_MASK), + + /* UTL core regs */ + DUTL(SYS_BUS_CONTROL), + DUTL(STATUS), + DUTL(SYS_BUS_AGENT_STATUS), + DUTL(SYS_BUS_AGENT_ERR_SEV), + DUTL(SYS_BUS_AGENT_IRQ_EN), + DUTL(SYS_BUS_BURST_SZ_CONF), + DUTL(REVISION_ID), + DUTL(OUT_POST_HDR_BUF_ALLOC), + DUTL(OUT_POST_DAT_BUF_ALLOC), + DUTL(IN_POST_HDR_BUF_ALLOC), + DUTL(IN_POST_DAT_BUF_ALLOC), + DUTL(OUT_NP_BUF_ALLOC), + DUTL(IN_NP_BUF_ALLOC), + DUTL(PCIE_TAGS_ALLOC), + DUTL(GBIF_READ_TAGS_ALLOC), + + DUTL(PCIE_PORT_CONTROL), + DUTL(PCIE_PORT_STATUS), + DUTL(PCIE_PORT_ERROR_SEV), + DUTL(PCIE_PORT_IRQ_EN), + DUTL(RC_STATUS), + DUTL(RC_ERR_SEVERITY), + DUTL(RC_IRQ_EN), + DUTL(EP_STATUS), + DUTL(EP_ERR_SEVERITY), + DUTL(EP_ERR_IRQ_EN), + DUTL(PCI_PM_CTRL1), + DUTL(PCI_PM_CTRL2), + + /* PCIe stack regs */ + DREG(SYSTEM_CONFIG1), + DREG(SYSTEM_CONFIG2), + DREG(EP_SYSTEM_CONFIG), + DREG(EP_FLR), + DREG(EP_BAR_CONFIG), + DREG(LINK_CONFIG), + DREG(PM_CONFIG), + DREG(DLP_CONTROL), + DREG(DLP_STATUS), + DREG(ERR_REPORT_CONTROL), + DREG(SLOT_CONTROL1), + DREG(SLOT_CONTROL2), + DREG(UTL_CONFIG), + DREG(BUFFERS_CONFIG), + DREG(ERROR_INJECT), + DREG(SRIOV_CONFIG), + DREG(PF0_SRIOV_STATUS), + DREG(PF1_SRIOV_STATUS), + DREG(PORT_NUMBER), + DREG(POR_SYSTEM_CONFIG), + + /* Internal logic regs */ + DREG(PHB_VERSION), + DREG(RESET), + DREG(PHB_CONTROL), + DREG(PHB_TIMEOUT_CONTROL1), + DREG(PHB_QUIESCE_DMA), + DREG(PHB_DMA_READ_TAG_ACTV), + DREG(PHB_TCE_READ_TAG_ACTV), + + /* FIR registers */ + DREG(LEM_FIR_ACCUM), + DREG(LEM_FIR_AND_MASK), + DREG(LEM_FIR_OR_MASK), + DREG(LEM_ACTION0), + DREG(LEM_ACTION1), + DREG(LEM_ERROR_MASK), + DREG(LEM_ERROR_AND_MASK), + DREG(LEM_ERROR_OR_MASK), + + /* Error traps registers */ + DREG(PHB_ERR_STATUS), + DREG(PHB_ERR_STATUS), + DREG(PHB_ERR1_STATUS), + DREG(PHB_ERR_INJECT), + DREG(PHB_ERR_LEM_ENABLE), + DREG(PHB_ERR_IRQ_ENABLE), + DREG(PHB_ERR_FREEZE_ENABLE), + DREG(PHB_ERR_SIDE_ENABLE), + DREG(PHB_ERR_LOG_0), + DREG(PHB_ERR_LOG_1), + DREG(PHB_ERR_STATUS_MASK), + DREG(PHB_ERR1_STATUS_MASK), + DREG(MMIO_ERR_STATUS), + DREG(MMIO_ERR1_STATUS), + DREG(MMIO_ERR_INJECT), + DREG(MMIO_ERR_LEM_ENABLE), + DREG(MMIO_ERR_IRQ_ENABLE), + DREG(MMIO_ERR_FREEZE_ENABLE), + DREG(MMIO_ERR_SIDE_ENABLE), + DREG(MMIO_ERR_LOG_0), + DREG(MMIO_ERR_LOG_1), + DREG(MMIO_ERR_STATUS_MASK), + DREG(MMIO_ERR1_STATUS_MASK), + DREG(DMA_ERR_STATUS), + DREG(DMA_ERR1_STATUS), + DREG(DMA_ERR_INJECT), + DREG(DMA_ERR_LEM_ENABLE), + DREG(DMA_ERR_IRQ_ENABLE), + DREG(DMA_ERR_FREEZE_ENABLE), + DREG(DMA_ERR_SIDE_ENABLE), + DREG(DMA_ERR_LOG_0), + DREG(DMA_ERR_LOG_1), + DREG(DMA_ERR_STATUS_MASK), + DREG(DMA_ERR1_STATUS_MASK), + + /* Debug and Trace registers */ + DREG(PHB_DEBUG_CONTROL0), + DREG(PHB_DEBUG_STATUS0), + DREG(PHB_DEBUG_CONTROL1), + DREG(PHB_DEBUG_STATUS1), + DREG(PHB_DEBUG_CONTROL2), + DREG(PHB_DEBUG_STATUS2), + DREG(PHB_DEBUG_CONTROL3), + DREG(PHB_DEBUG_STATUS3), + DREG(PHB_DEBUG_CONTROL4), + DREG(PHB_DEBUG_STATUS4), + DREG(PHB_DEBUG_CONTROL5), + DREG(PHB_DEBUG_STATUS5), + + /* Don't seem to exist ... + DREG(PHB_DEBUG_CONTROL6), + DREG(PHB_DEBUG_STATUS6), + */ +}; + +static int wsp_pci_regs_show(struct seq_file *m, void *private) +{ + struct wsp_phb *phb = m->private; + struct pci_controller *hose = phb->hose; + int i; + + for (i = 0; i < ARRAY_SIZE(wsp_pci_regs); i++) { + /* Skip write-only regs */ + if (wsp_pci_regs[i].offset == 0xc08 || + wsp_pci_regs[i].offset == 0xc10 || + wsp_pci_regs[i].offset == 0xc38 || + wsp_pci_regs[i].offset == 0xc40) + continue; + seq_printf(m, "0x%03x: 0x%016llx %s\n", + wsp_pci_regs[i].offset, + in_be64(hose->cfg_data + wsp_pci_regs[i].offset), + wsp_pci_regs[i].name); + } + return 0; +} + +static int wsp_pci_regs_open(struct inode *inode, struct file *file) +{ + return single_open(file, wsp_pci_regs_show, inode->i_private); +} + +static const struct file_operations wsp_pci_regs_fops = { + .open = wsp_pci_regs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int wsp_pci_reg_set(void *data, u64 val) +{ + out_be64((void __iomem *)data, val); + return 0; +} + +static int wsp_pci_reg_get(void *data, u64 *val) +{ + *val = in_be64((void __iomem *)data); + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(wsp_pci_reg_fops, wsp_pci_reg_get, wsp_pci_reg_set, "0x%llx\n"); + +static irqreturn_t wsp_pci_err_irq(int irq, void *dev_id) +{ + struct wsp_phb *phb = dev_id; + struct pci_controller *hose = phb->hose; + irqreturn_t handled = IRQ_NONE; + struct wsp_pcie_err_log_data ed; + + pr_err("PCI: Error interrupt on %s (PHB %d)\n", + hose->dn->full_name, hose->global_number); + again: + memset(&ed, 0, sizeof(ed)); + + /* Read and clear UTL errors */ + ed.utl_sys_err = in_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_STATUS); + if (ed.utl_sys_err) + out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_STATUS, ed.utl_sys_err); + ed.utl_port_err = in_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_STATUS); + if (ed.utl_port_err) + out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_STATUS, ed.utl_port_err); + ed.utl_rc_err = in_be64(hose->cfg_data + PCIE_UTL_RC_STATUS); + if (ed.utl_rc_err) + out_be64(hose->cfg_data + PCIE_UTL_RC_STATUS, ed.utl_rc_err); + + /* Read and clear main trap errors */ + ed.phb_err = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_STATUS); + if (ed.phb_err) { + ed.phb_err1 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR1_STATUS); + ed.phb_log0 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_LOG_0); + ed.phb_log1 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_LOG_1); + out_be64(hose->cfg_data + PCIE_REG_PHB_ERR1_STATUS, 0); + out_be64(hose->cfg_data + PCIE_REG_PHB_ERR_STATUS, 0); + } + ed.mmio_err = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_STATUS); + if (ed.mmio_err) { + ed.mmio_err1 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR1_STATUS); + ed.mmio_log0 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_LOG_0); + ed.mmio_log1 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_LOG_1); + out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR1_STATUS, 0); + out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_STATUS, 0); + } + ed.dma_err = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS); + if (ed.dma_err) { + ed.dma_err1 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS); + ed.dma_log0 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_LOG_0); + ed.dma_log1 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_LOG_1); + out_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS, 0); + out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS, 0); + } + + /* Now print things out */ + if (ed.phb_err) { + pr_err(" PHB Error Status : 0x%016llx\n", ed.phb_err); + pr_err(" PHB First Error Status: 0x%016llx\n", ed.phb_err1); + pr_err(" PHB Error Log 0 : 0x%016llx\n", ed.phb_log0); + pr_err(" PHB Error Log 1 : 0x%016llx\n", ed.phb_log1); + } + if (ed.mmio_err) { + pr_err(" MMIO Error Status : 0x%016llx\n", ed.mmio_err); + pr_err(" MMIO First Error Status: 0x%016llx\n", ed.mmio_err1); + pr_err(" MMIO Error Log 0 : 0x%016llx\n", ed.mmio_log0); + pr_err(" MMIO Error Log 1 : 0x%016llx\n", ed.mmio_log1); + } + if (ed.dma_err) { + pr_err(" DMA Error Status : 0x%016llx\n", ed.dma_err); + pr_err(" DMA First Error Status: 0x%016llx\n", ed.dma_err1); + pr_err(" DMA Error Log 0 : 0x%016llx\n", ed.dma_log0); + pr_err(" DMA Error Log 1 : 0x%016llx\n", ed.dma_log1); + } + if (ed.utl_sys_err) + pr_err(" UTL Sys Error Status : 0x%016llx\n", ed.utl_sys_err); + if (ed.utl_port_err) + pr_err(" UTL Port Error Status : 0x%016llx\n", ed.utl_port_err); + if (ed.utl_rc_err) + pr_err(" UTL RC Error Status : 0x%016llx\n", ed.utl_rc_err); + + /* Interrupts are caused by the error traps. If we had any error there + * we loop again in case the UTL buffered some new stuff between + * going there and going to the traps + */ + if (ed.dma_err || ed.mmio_err || ed.phb_err) { + handled = IRQ_HANDLED; + goto again; + } + return handled; +} + +static void __init wsp_setup_pci_err_reporting(struct wsp_phb *phb) +{ + struct pci_controller *hose = phb->hose; + int err_irq, i, rc; + char fname[16]; + + /* Create a debugfs file for that PHB */ + sprintf(fname, "phb%d", phb->hose->global_number); + phb->ddir = debugfs_create_dir(fname, powerpc_debugfs_root); + + /* Some useful debug output */ + if (phb->ddir) { + struct dentry *d = debugfs_create_dir("regs", phb->ddir); + char tmp[64]; + + for (i = 0; i < ARRAY_SIZE(wsp_pci_regs); i++) { + sprintf(tmp, "%03x_%s", wsp_pci_regs[i].offset, + wsp_pci_regs[i].name); + debugfs_create_file(tmp, 0600, d, + hose->cfg_data + wsp_pci_regs[i].offset, + &wsp_pci_reg_fops); + } + debugfs_create_file("all_regs", 0600, phb->ddir, phb, &wsp_pci_regs_fops); + } + + /* Find the IRQ number for that PHB */ + err_irq = irq_of_parse_and_map(hose->dn, 0); + if (err_irq == 0) + /* XXX Error IRQ lacking from device-tree */ + err_irq = wsp_pci_get_err_irq_no_dt(hose->dn); + if (err_irq == 0) { + pr_err("PCI: Failed to fetch error interrupt for %s\n", + hose->dn->full_name); + return; + } + /* Request it */ + rc = request_irq(err_irq, wsp_pci_err_irq, 0, "wsp_pci error", phb); + if (rc) { + pr_err("PCI: Failed to request interrupt for %s\n", + hose->dn->full_name); + } + /* Enable interrupts for all errors for now */ + out_be64(hose->cfg_data + PCIE_REG_PHB_ERR_IRQ_ENABLE, 0xffffffffffffffffull); + out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_IRQ_ENABLE, 0xffffffffffffffffull); + out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_IRQ_ENABLE, 0xffffffffffffffffull); +} + +/* + * This is called later to hookup with the error interrupt + */ +static int __init wsp_setup_pci_late(void) +{ + struct wsp_phb *phb; + + list_for_each_entry(phb, &wsp_phbs, all) + wsp_setup_pci_err_reporting(phb); + + return 0; +} +arch_initcall(wsp_setup_pci_late); diff --git a/arch/powerpc/platforms/wsp/wsp_pci.h b/arch/powerpc/platforms/wsp/wsp_pci.h new file mode 100644 index 000000000000..52e9bd95250d --- /dev/null +++ b/arch/powerpc/platforms/wsp/wsp_pci.h @@ -0,0 +1,268 @@ +/* + * Copyright 2010 Ben Herrenschmidt, IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __WSP_PCI_H +#define __WSP_PCI_H + +/* Architected registers */ +#define PCIE_REG_DMA_CHAN_STATUS 0x110 +#define PCIE_REG_CPU_LOADSTORE_STATUS 0x120 + +#define PCIE_REG_CONFIG_DATA 0x130 +#define PCIE_REG_LOCK0 0x138 +#define PCIE_REG_CONFIG_ADDRESS 0x140 +#define PCIE_REG_CA_ENABLE 0x8000000000000000ull +#define PCIE_REG_CA_BUS_MASK 0x0ff0000000000000ull +#define PCIE_REG_CA_BUS_SHIFT (20+32) +#define PCIE_REG_CA_DEV_MASK 0x000f800000000000ull +#define PCIE_REG_CA_DEV_SHIFT (15+32) +#define PCIE_REG_CA_FUNC_MASK 0x0000700000000000ull +#define PCIE_REG_CA_FUNC_SHIFT (12+32) +#define PCIE_REG_CA_REG_MASK 0x00000fff00000000ull +#define PCIE_REG_CA_REG_SHIFT ( 0+32) +#define PCIE_REG_CA_BE_MASK 0x00000000f0000000ull +#define PCIE_REG_CA_BE_SHIFT ( 28) +#define PCIE_REG_LOCK1 0x148 + +#define PCIE_REG_PHB_CONFIG 0x160 +#define PCIE_REG_PHBC_64B_TCE_EN 0x2000000000000000ull +#define PCIE_REG_PHBC_MMIO_DMA_FREEZE_EN 0x1000000000000000ull +#define PCIE_REG_PHBC_32BIT_MSI_EN 0x0080000000000000ull +#define PCIE_REG_PHBC_M64_EN 0x0040000000000000ull +#define PCIE_REG_PHBC_IO_EN 0x0008000000000000ull +#define PCIE_REG_PHBC_64BIT_MSI_EN 0x0002000000000000ull +#define PCIE_REG_PHBC_M32A_EN 0x0000800000000000ull +#define PCIE_REG_PHBC_M32B_EN 0x0000400000000000ull +#define PCIE_REG_PHBC_MSI_PE_VALIDATE 0x0000200000000000ull +#define PCIE_REG_PHBC_DMA_XLATE_BYPASS 0x0000100000000000ull + +#define PCIE_REG_IO_BASE_ADDR 0x170 +#define PCIE_REG_IO_BASE_MASK 0x178 +#define PCIE_REG_IO_START_ADDR 0x180 + +#define PCIE_REG_M32A_BASE_ADDR 0x190 +#define PCIE_REG_M32A_BASE_MASK 0x198 +#define PCIE_REG_M32A_START_ADDR 0x1a0 + +#define PCIE_REG_M32B_BASE_ADDR 0x1b0 +#define PCIE_REG_M32B_BASE_MASK 0x1b8 +#define PCIE_REG_M32B_START_ADDR 0x1c0 + +#define PCIE_REG_M64_BASE_ADDR 0x1e0 +#define PCIE_REG_M64_BASE_MASK 0x1e8 +#define PCIE_REG_M64_START_ADDR 0x1f0 + +#define PCIE_REG_TCE_KILL 0x210 +#define PCIE_REG_TCEKILL_SINGLE 0x8000000000000000ull +#define PCIE_REG_TCEKILL_ADDR_MASK 0x000003fffffffff8ull +#define PCIE_REG_TCEKILL_PS_4K 0 +#define PCIE_REG_TCEKILL_PS_64K 1 +#define PCIE_REG_TCEKILL_PS_16M 2 +#define PCIE_REG_TCEKILL_PS_16G 3 + +#define PCIE_REG_IODA_ADDR 0x220 +#define PCIE_REG_IODA_AD_AUTOINC 0x8000000000000000ull +#define PCIE_REG_IODA_AD_TBL_MVT 0x0005000000000000ull +#define PCIE_REG_IODA_AD_TBL_PELT 0x0006000000000000ull +#define PCIE_REG_IODA_AD_TBL_PESTA 0x0007000000000000ull +#define PCIE_REG_IODA_AD_TBL_PESTB 0x0008000000000000ull +#define PCIE_REG_IODA_AD_TBL_TVT 0x0009000000000000ull +#define PCIE_REG_IODA_AD_TBL_TCE 0x000a000000000000ull +#define PCIE_REG_IODA_DATA0 0x228 +#define PCIE_REG_IODA_DATA1 0x230 + +#define PCIE_REG_LOCK2 0x240 + +#define PCIE_REG_PHB_GEN_CAP 0x250 +#define PCIE_REG_PHB_TCE_CAP 0x258 +#define PCIE_REG_PHB_IRQ_CAP 0x260 +#define PCIE_REG_PHB_EEH_CAP 0x268 + +#define PCIE_REG_PAPR_ERR_INJ_CONTROL 0x2b0 +#define PCIE_REG_PAPR_ERR_INJ_ADDR 0x2b8 +#define PCIE_REG_PAPR_ERR_INJ_MASK 0x2c0 + + +#define PCIE_REG_SYS_CFG1 0x600 +#define PCIE_REG_SYS_CFG1_CLASS_CODE 0x0000000000ffffffull + +#define IODA_TVT0_TTA_MASK 0x000fffffffff0000ull +#define IODA_TVT0_TTA_SHIFT 4 +#define IODA_TVT0_BUSNUM_VALID_MASK 0x000000000000e000ull +#define IODA_TVT0_TCE_TABLE_SIZE_MASK 0x0000000000001f00ull +#define IODA_TVT0_TCE_TABLE_SIZE_SHIFT 8 +#define IODA_TVT0_BUSNUM_VALUE_MASK 0x00000000000000ffull +#define IODA_TVT0_BUSNUM_VALID_SHIFT 0 +#define IODA_TVT1_DEVNUM_VALID 0x2000000000000000ull +#define IODA_TVT1_DEVNUM_VALUE_MASK 0x1f00000000000000ull +#define IODA_TVT1_DEVNUM_VALUE_SHIFT 56 +#define IODA_TVT1_FUNCNUM_VALID 0x0008000000000000ull +#define IODA_TVT1_FUNCNUM_VALUE_MASK 0x0007000000000000ull +#define IODA_TVT1_FUNCNUM_VALUE_SHIFT 48 +#define IODA_TVT1_IO_PAGE_SIZE_MASK 0x00001f0000000000ull +#define IODA_TVT1_IO_PAGE_SIZE_SHIFT 40 +#define IODA_TVT1_PE_NUMBER_MASK 0x000000000000003full +#define IODA_TVT1_PE_NUMBER_SHIFT 0 + +#define IODA_TVT_COUNT 64 + +/* UTL Core registers */ +#define PCIE_UTL_SYS_BUS_CONTROL 0x400 +#define PCIE_UTL_STATUS 0x408 +#define PCIE_UTL_SYS_BUS_AGENT_STATUS 0x410 +#define PCIE_UTL_SYS_BUS_AGENT_ERR_SEV 0x418 +#define PCIE_UTL_SYS_BUS_AGENT_IRQ_EN 0x420 +#define PCIE_UTL_SYS_BUS_BURST_SZ_CONF 0x440 +#define PCIE_UTL_REVISION_ID 0x448 + +#define PCIE_UTL_OUT_POST_HDR_BUF_ALLOC 0x4c0 +#define PCIE_UTL_OUT_POST_DAT_BUF_ALLOC 0x4d0 +#define PCIE_UTL_IN_POST_HDR_BUF_ALLOC 0x4e0 +#define PCIE_UTL_IN_POST_DAT_BUF_ALLOC 0x4f0 +#define PCIE_UTL_OUT_NP_BUF_ALLOC 0x500 +#define PCIE_UTL_IN_NP_BUF_ALLOC 0x510 +#define PCIE_UTL_PCIE_TAGS_ALLOC 0x520 +#define PCIE_UTL_GBIF_READ_TAGS_ALLOC 0x530 + +#define PCIE_UTL_PCIE_PORT_CONTROL 0x540 +#define PCIE_UTL_PCIE_PORT_STATUS 0x548 +#define PCIE_UTL_PCIE_PORT_ERROR_SEV 0x550 +#define PCIE_UTL_PCIE_PORT_IRQ_EN 0x558 +#define PCIE_UTL_RC_STATUS 0x560 +#define PCIE_UTL_RC_ERR_SEVERITY 0x568 +#define PCIE_UTL_RC_IRQ_EN 0x570 +#define PCIE_UTL_EP_STATUS 0x578 +#define PCIE_UTL_EP_ERR_SEVERITY 0x580 +#define PCIE_UTL_EP_ERR_IRQ_EN 0x588 + +#define PCIE_UTL_PCI_PM_CTRL1 0x590 +#define PCIE_UTL_PCI_PM_CTRL2 0x598 + +/* PCIe stack registers */ +#define PCIE_REG_SYSTEM_CONFIG1 0x600 +#define PCIE_REG_SYSTEM_CONFIG2 0x608 +#define PCIE_REG_EP_SYSTEM_CONFIG 0x618 +#define PCIE_REG_EP_FLR 0x620 +#define PCIE_REG_EP_BAR_CONFIG 0x628 +#define PCIE_REG_LINK_CONFIG 0x630 +#define PCIE_REG_PM_CONFIG 0x640 +#define PCIE_REG_DLP_CONTROL 0x650 +#define PCIE_REG_DLP_STATUS 0x658 +#define PCIE_REG_ERR_REPORT_CONTROL 0x660 +#define PCIE_REG_SLOT_CONTROL1 0x670 +#define PCIE_REG_SLOT_CONTROL2 0x678 +#define PCIE_REG_UTL_CONFIG 0x680 +#define PCIE_REG_BUFFERS_CONFIG 0x690 +#define PCIE_REG_ERROR_INJECT 0x698 +#define PCIE_REG_SRIOV_CONFIG 0x6a0 +#define PCIE_REG_PF0_SRIOV_STATUS 0x6a8 +#define PCIE_REG_PF1_SRIOV_STATUS 0x6b0 +#define PCIE_REG_PORT_NUMBER 0x700 +#define PCIE_REG_POR_SYSTEM_CONFIG 0x708 + +/* PHB internal logic registers */ +#define PCIE_REG_PHB_VERSION 0x800 +#define PCIE_REG_RESET 0x808 +#define PCIE_REG_PHB_CONTROL 0x810 +#define PCIE_REG_PHB_TIMEOUT_CONTROL1 0x878 +#define PCIE_REG_PHB_QUIESCE_DMA 0x888 +#define PCIE_REG_PHB_DMA_READ_TAG_ACTV 0x900 +#define PCIE_REG_PHB_TCE_READ_TAG_ACTV 0x908 + +/* FIR registers */ +#define PCIE_REG_LEM_FIR_ACCUM 0xc00 +#define PCIE_REG_LEM_FIR_AND_MASK 0xc08 +#define PCIE_REG_LEM_FIR_OR_MASK 0xc10 +#define PCIE_REG_LEM_ACTION0 0xc18 +#define PCIE_REG_LEM_ACTION1 0xc20 +#define PCIE_REG_LEM_ERROR_MASK 0xc30 +#define PCIE_REG_LEM_ERROR_AND_MASK 0xc38 +#define PCIE_REG_LEM_ERROR_OR_MASK 0xc40 + +/* PHB Error registers */ +#define PCIE_REG_PHB_ERR_STATUS 0xc80 +#define PCIE_REG_PHB_ERR1_STATUS 0xc88 +#define PCIE_REG_PHB_ERR_INJECT 0xc90 +#define PCIE_REG_PHB_ERR_LEM_ENABLE 0xc98 +#define PCIE_REG_PHB_ERR_IRQ_ENABLE 0xca0 +#define PCIE_REG_PHB_ERR_FREEZE_ENABLE 0xca8 +#define PCIE_REG_PHB_ERR_SIDE_ENABLE 0xcb8 +#define PCIE_REG_PHB_ERR_LOG_0 0xcc0 +#define PCIE_REG_PHB_ERR_LOG_1 0xcc8 +#define PCIE_REG_PHB_ERR_STATUS_MASK 0xcd0 +#define PCIE_REG_PHB_ERR1_STATUS_MASK 0xcd8 + +#define PCIE_REG_MMIO_ERR_STATUS 0xd00 +#define PCIE_REG_MMIO_ERR1_STATUS 0xd08 +#define PCIE_REG_MMIO_ERR_INJECT 0xd10 +#define PCIE_REG_MMIO_ERR_LEM_ENABLE 0xd18 +#define PCIE_REG_MMIO_ERR_IRQ_ENABLE 0xd20 +#define PCIE_REG_MMIO_ERR_FREEZE_ENABLE 0xd28 +#define PCIE_REG_MMIO_ERR_SIDE_ENABLE 0xd38 +#define PCIE_REG_MMIO_ERR_LOG_0 0xd40 +#define PCIE_REG_MMIO_ERR_LOG_1 0xd48 +#define PCIE_REG_MMIO_ERR_STATUS_MASK 0xd50 +#define PCIE_REG_MMIO_ERR1_STATUS_MASK 0xd58 + +#define PCIE_REG_DMA_ERR_STATUS 0xd80 +#define PCIE_REG_DMA_ERR1_STATUS 0xd88 +#define PCIE_REG_DMA_ERR_INJECT 0xd90 +#define PCIE_REG_DMA_ERR_LEM_ENABLE 0xd98 +#define PCIE_REG_DMA_ERR_IRQ_ENABLE 0xda0 +#define PCIE_REG_DMA_ERR_FREEZE_ENABLE 0xda8 +#define PCIE_REG_DMA_ERR_SIDE_ENABLE 0xdb8 +#define PCIE_REG_DMA_ERR_LOG_0 0xdc0 +#define PCIE_REG_DMA_ERR_LOG_1 0xdc8 +#define PCIE_REG_DMA_ERR_STATUS_MASK 0xdd0 +#define PCIE_REG_DMA_ERR1_STATUS_MASK 0xdd8 + +/* Shortcuts for access to the above using the PHB definitions + * with an offset + */ +#define PCIE_REG_ERR_PHB_OFFSET 0x0 +#define PCIE_REG_ERR_MMIO_OFFSET 0x80 +#define PCIE_REG_ERR_DMA_OFFSET 0x100 + +/* Debug and Trace registers */ +#define PCIE_REG_PHB_DEBUG_CONTROL0 0xe00 +#define PCIE_REG_PHB_DEBUG_STATUS0 0xe08 +#define PCIE_REG_PHB_DEBUG_CONTROL1 0xe10 +#define PCIE_REG_PHB_DEBUG_STATUS1 0xe18 +#define PCIE_REG_PHB_DEBUG_CONTROL2 0xe20 +#define PCIE_REG_PHB_DEBUG_STATUS2 0xe28 +#define PCIE_REG_PHB_DEBUG_CONTROL3 0xe30 +#define PCIE_REG_PHB_DEBUG_STATUS3 0xe38 +#define PCIE_REG_PHB_DEBUG_CONTROL4 0xe40 +#define PCIE_REG_PHB_DEBUG_STATUS4 0xe48 +#define PCIE_REG_PHB_DEBUG_CONTROL5 0xe50 +#define PCIE_REG_PHB_DEBUG_STATUS5 0xe58 +#define PCIE_REG_PHB_DEBUG_CONTROL6 0xe60 +#define PCIE_REG_PHB_DEBUG_STATUS6 0xe68 + +/* Definition for PCIe errors */ +struct wsp_pcie_err_log_data { + __u64 phb_err; + __u64 phb_err1; + __u64 phb_log0; + __u64 phb_log1; + __u64 mmio_err; + __u64 mmio_err1; + __u64 mmio_log0; + __u64 mmio_log1; + __u64 dma_err; + __u64 dma_err1; + __u64 dma_log0; + __u64 dma_log1; + __u64 utl_sys_err; + __u64 utl_port_err; + __u64 utl_rc_err; + __u64 unused; +}; + +#endif /* __WSP_PCI_H */ diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index cf736ca0cf05..84e13253aec5 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y) obj-$(CONFIG_FSL_PMC) += fsl_pmc.o obj-$(CONFIG_FSL_LBC) += fsl_lbc.o obj-$(CONFIG_FSL_GTM) += fsl_gtm.o -obj-$(CONFIG_MPC8xxx_GPIO) += mpc8xxx_gpio.o obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o obj-$(CONFIG_FSL_RIO) += fsl_rio.o diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c index d55d0ad0deab..8db10bb90042 100644 --- a/arch/powerpc/sysdev/cpm_common.c +++ b/arch/powerpc/sysdev/cpm_common.c @@ -3,7 +3,7 @@ * * Author: Scott Wood <scottwood@freescale.com> * - * Copyright 2007 Freescale Semiconductor, Inc. + * Copyright 2007-2008,2010 Freescale Semiconductor, Inc. * * Some parts derived from commproc.c/cpm2_common.c, which is: * Copyright (c) 1997 Dan error_act (dmalek@jlc.net) @@ -146,6 +146,7 @@ unsigned long cpm_muram_alloc(unsigned long size, unsigned long align) spin_lock_irqsave(&cpm_muram_lock, flags); cpm_muram_info.alignment = align; start = rh_alloc(&cpm_muram_info, size, "commproc"); + memset(cpm_muram_addr(start), 0, size); spin_unlock_irqrestore(&cpm_muram_lock, flags); return start; diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c index 419a77239bd7..e5c344d336ea 100644 --- a/arch/powerpc/sysdev/fsl_msi.c +++ b/arch/powerpc/sysdev/fsl_msi.c @@ -30,7 +30,7 @@ LIST_HEAD(msi_head); struct fsl_msi_feature { u32 fsl_pic_ip; - u32 msiir_offset; + u32 msiir_offset; /* Offset of MSIIR, relative to start of MSIR bank */ }; struct fsl_msi_cascade_data { @@ -126,10 +126,19 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq, { struct fsl_msi *msi_data = fsl_msi_data; struct pci_controller *hose = pci_bus_to_host(pdev->bus); - u64 base = fsl_pci_immrbar_base(hose); + u64 address; /* Physical address of the MSIIR */ + int len; + const u64 *reg; + + /* If the msi-address-64 property exists, then use it */ + reg = of_get_property(hose->dn, "msi-address-64", &len); + if (reg && (len == sizeof(u64))) + address = be64_to_cpup(reg); + else + address = fsl_pci_immrbar_base(hose) + msi_data->msiir_offset; - msg->address_lo = msi_data->msi_addr_lo + lower_32_bits(base); - msg->address_hi = msi_data->msi_addr_hi + upper_32_bits(base); + msg->address_lo = lower_32_bits(address); + msg->address_hi = upper_32_bits(address); msg->data = hwirq; @@ -296,7 +305,7 @@ static int __devinit fsl_msi_setup_hwirq(struct fsl_msi *msi, } msi->msi_virqs[irq_index] = virt_msir; - cascade_data->index = offset + irq_index; + cascade_data->index = offset; cascade_data->msi_data = msi; irq_set_handler_data(virt_msir, cascade_data); irq_set_chained_handler(virt_msir, fsl_msi_cascade); @@ -359,8 +368,7 @@ static int __devinit fsl_of_msi_probe(struct platform_device *dev) msi->irqhost->host_data = msi; - msi->msi_addr_hi = 0x0; - msi->msi_addr_lo = features->msiir_offset + (res.start & 0xfffff); + msi->msiir_offset = features->msiir_offset + (res.start & 0xfffff); rc = fsl_msi_init_allocator(msi); if (rc) { @@ -376,8 +384,10 @@ static int __devinit fsl_of_msi_probe(struct platform_device *dev) goto error_out; } - if (!p) + if (!p) { p = all_avail; + len = sizeof(all_avail); + } for (irq_index = 0, i = 0; i < len / (2 * sizeof(u32)); i++) { if (p[i * 2] % IRQS_PER_MSI_REG || @@ -393,7 +403,7 @@ static int __devinit fsl_of_msi_probe(struct platform_device *dev) count = p[i * 2 + 1] / IRQS_PER_MSI_REG; for (j = 0; j < count; j++, irq_index++) { - err = fsl_msi_setup_hwirq(msi, dev, offset, irq_index); + err = fsl_msi_setup_hwirq(msi, dev, offset + j, irq_index); if (err) goto error_out; } diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h index 624580c252d7..1313abbc5200 100644 --- a/arch/powerpc/sysdev/fsl_msi.h +++ b/arch/powerpc/sysdev/fsl_msi.h @@ -28,8 +28,7 @@ struct fsl_msi { unsigned long cascade_irq; - u32 msi_addr_lo; - u32 msi_addr_hi; + u32 msiir_offset; /* Offset of MSIIR, relative to start of CCSR */ void __iomem *msi_regs; u32 feature; int msi_virqs[NR_MSI_REG]; diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c deleted file mode 100644 index fb4963abdf55..000000000000 --- a/arch/powerpc/sysdev/mpc8xxx_gpio.c +++ /dev/null @@ -1,395 +0,0 @@ -/* - * GPIOs on MPC512x/8349/8572/8610 and compatible - * - * Copyright (C) 2008 Peter Korsgaard <jacmet@sunsite.dk> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_gpio.h> -#include <linux/gpio.h> -#include <linux/slab.h> -#include <linux/irq.h> - -#define MPC8XXX_GPIO_PINS 32 - -#define GPIO_DIR 0x00 -#define GPIO_ODR 0x04 -#define GPIO_DAT 0x08 -#define GPIO_IER 0x0c -#define GPIO_IMR 0x10 -#define GPIO_ICR 0x14 -#define GPIO_ICR2 0x18 - -struct mpc8xxx_gpio_chip { - struct of_mm_gpio_chip mm_gc; - spinlock_t lock; - - /* - * shadowed data register to be able to clear/set output pins in - * open drain mode safely - */ - u32 data; - struct irq_host *irq; - void *of_dev_id_data; -}; - -static inline u32 mpc8xxx_gpio2mask(unsigned int gpio) -{ - return 1u << (MPC8XXX_GPIO_PINS - 1 - gpio); -} - -static inline struct mpc8xxx_gpio_chip * -to_mpc8xxx_gpio_chip(struct of_mm_gpio_chip *mm) -{ - return container_of(mm, struct mpc8xxx_gpio_chip, mm_gc); -} - -static void mpc8xxx_gpio_save_regs(struct of_mm_gpio_chip *mm) -{ - struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm); - - mpc8xxx_gc->data = in_be32(mm->regs + GPIO_DAT); -} - -/* Workaround GPIO 1 errata on MPC8572/MPC8536. The status of GPIOs - * defined as output cannot be determined by reading GPDAT register, - * so we use shadow data register instead. The status of input pins - * is determined by reading GPDAT register. - */ -static int mpc8572_gpio_get(struct gpio_chip *gc, unsigned int gpio) -{ - u32 val; - struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); - struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm); - - val = in_be32(mm->regs + GPIO_DAT) & ~in_be32(mm->regs + GPIO_DIR); - - return (val | mpc8xxx_gc->data) & mpc8xxx_gpio2mask(gpio); -} - -static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio) -{ - struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); - - return in_be32(mm->regs + GPIO_DAT) & mpc8xxx_gpio2mask(gpio); -} - -static void mpc8xxx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) -{ - struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); - struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm); - unsigned long flags; - - spin_lock_irqsave(&mpc8xxx_gc->lock, flags); - - if (val) - mpc8xxx_gc->data |= mpc8xxx_gpio2mask(gpio); - else - mpc8xxx_gc->data &= ~mpc8xxx_gpio2mask(gpio); - - out_be32(mm->regs + GPIO_DAT, mpc8xxx_gc->data); - - spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); -} - -static int mpc8xxx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) -{ - struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); - struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm); - unsigned long flags; - - spin_lock_irqsave(&mpc8xxx_gc->lock, flags); - - clrbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio)); - - spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); - - return 0; -} - -static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) -{ - struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); - struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm); - unsigned long flags; - - mpc8xxx_gpio_set(gc, gpio, val); - - spin_lock_irqsave(&mpc8xxx_gc->lock, flags); - - setbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio)); - - spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); - - return 0; -} - -static int mpc8xxx_gpio_to_irq(struct gpio_chip *gc, unsigned offset) -{ - struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); - struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm); - - if (mpc8xxx_gc->irq && offset < MPC8XXX_GPIO_PINS) - return irq_create_mapping(mpc8xxx_gc->irq, offset); - else - return -ENXIO; -} - -static void mpc8xxx_gpio_irq_cascade(unsigned int irq, struct irq_desc *desc) -{ - struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_desc_get_handler_data(desc); - struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc; - unsigned int mask; - - mask = in_be32(mm->regs + GPIO_IER) & in_be32(mm->regs + GPIO_IMR); - if (mask) - generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq, - 32 - ffs(mask))); -} - -static void mpc8xxx_irq_unmask(struct irq_data *d) -{ - struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d); - struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc; - unsigned long flags; - - spin_lock_irqsave(&mpc8xxx_gc->lock, flags); - - setbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(irqd_to_hwirq(d))); - - spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); -} - -static void mpc8xxx_irq_mask(struct irq_data *d) -{ - struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d); - struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc; - unsigned long flags; - - spin_lock_irqsave(&mpc8xxx_gc->lock, flags); - - clrbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(irqd_to_hwirq(d))); - - spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); -} - -static void mpc8xxx_irq_ack(struct irq_data *d) -{ - struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d); - struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc; - - out_be32(mm->regs + GPIO_IER, mpc8xxx_gpio2mask(irqd_to_hwirq(d))); -} - -static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type) -{ - struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d); - struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc; - unsigned long flags; - - switch (flow_type) { - case IRQ_TYPE_EDGE_FALLING: - spin_lock_irqsave(&mpc8xxx_gc->lock, flags); - setbits32(mm->regs + GPIO_ICR, - mpc8xxx_gpio2mask(irqd_to_hwirq(d))); - spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); - break; - - case IRQ_TYPE_EDGE_BOTH: - spin_lock_irqsave(&mpc8xxx_gc->lock, flags); - clrbits32(mm->regs + GPIO_ICR, - mpc8xxx_gpio2mask(irqd_to_hwirq(d))); - spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); - break; - - default: - return -EINVAL; - } - - return 0; -} - -static int mpc512x_irq_set_type(struct irq_data *d, unsigned int flow_type) -{ - struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d); - struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc; - unsigned long gpio = irqd_to_hwirq(d); - void __iomem *reg; - unsigned int shift; - unsigned long flags; - - if (gpio < 16) { - reg = mm->regs + GPIO_ICR; - shift = (15 - gpio) * 2; - } else { - reg = mm->regs + GPIO_ICR2; - shift = (15 - (gpio % 16)) * 2; - } - - switch (flow_type) { - case IRQ_TYPE_EDGE_FALLING: - case IRQ_TYPE_LEVEL_LOW: - spin_lock_irqsave(&mpc8xxx_gc->lock, flags); - clrsetbits_be32(reg, 3 << shift, 2 << shift); - spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); - break; - - case IRQ_TYPE_EDGE_RISING: - case IRQ_TYPE_LEVEL_HIGH: - spin_lock_irqsave(&mpc8xxx_gc->lock, flags); - clrsetbits_be32(reg, 3 << shift, 1 << shift); - spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); - break; - - case IRQ_TYPE_EDGE_BOTH: - spin_lock_irqsave(&mpc8xxx_gc->lock, flags); - clrbits32(reg, 3 << shift); - spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); - break; - - default: - return -EINVAL; - } - - return 0; -} - -static struct irq_chip mpc8xxx_irq_chip = { - .name = "mpc8xxx-gpio", - .irq_unmask = mpc8xxx_irq_unmask, - .irq_mask = mpc8xxx_irq_mask, - .irq_ack = mpc8xxx_irq_ack, - .irq_set_type = mpc8xxx_irq_set_type, -}; - -static int mpc8xxx_gpio_irq_map(struct irq_host *h, unsigned int virq, - irq_hw_number_t hw) -{ - struct mpc8xxx_gpio_chip *mpc8xxx_gc = h->host_data; - - if (mpc8xxx_gc->of_dev_id_data) - mpc8xxx_irq_chip.irq_set_type = mpc8xxx_gc->of_dev_id_data; - - irq_set_chip_data(virq, h->host_data); - irq_set_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq); - irq_set_irq_type(virq, IRQ_TYPE_NONE); - - return 0; -} - -static int mpc8xxx_gpio_irq_xlate(struct irq_host *h, struct device_node *ct, - const u32 *intspec, unsigned int intsize, - irq_hw_number_t *out_hwirq, - unsigned int *out_flags) - -{ - /* interrupt sense values coming from the device tree equal either - * EDGE_FALLING or EDGE_BOTH - */ - *out_hwirq = intspec[0]; - *out_flags = intspec[1]; - - return 0; -} - -static struct irq_host_ops mpc8xxx_gpio_irq_ops = { - .map = mpc8xxx_gpio_irq_map, - .xlate = mpc8xxx_gpio_irq_xlate, -}; - -static struct of_device_id mpc8xxx_gpio_ids[] __initdata = { - { .compatible = "fsl,mpc8349-gpio", }, - { .compatible = "fsl,mpc8572-gpio", }, - { .compatible = "fsl,mpc8610-gpio", }, - { .compatible = "fsl,mpc5121-gpio", .data = mpc512x_irq_set_type, }, - { .compatible = "fsl,qoriq-gpio", }, - {} -}; - -static void __init mpc8xxx_add_controller(struct device_node *np) -{ - struct mpc8xxx_gpio_chip *mpc8xxx_gc; - struct of_mm_gpio_chip *mm_gc; - struct gpio_chip *gc; - const struct of_device_id *id; - unsigned hwirq; - int ret; - - mpc8xxx_gc = kzalloc(sizeof(*mpc8xxx_gc), GFP_KERNEL); - if (!mpc8xxx_gc) { - ret = -ENOMEM; - goto err; - } - - spin_lock_init(&mpc8xxx_gc->lock); - - mm_gc = &mpc8xxx_gc->mm_gc; - gc = &mm_gc->gc; - - mm_gc->save_regs = mpc8xxx_gpio_save_regs; - gc->ngpio = MPC8XXX_GPIO_PINS; - gc->direction_input = mpc8xxx_gpio_dir_in; - gc->direction_output = mpc8xxx_gpio_dir_out; - if (of_device_is_compatible(np, "fsl,mpc8572-gpio")) - gc->get = mpc8572_gpio_get; - else - gc->get = mpc8xxx_gpio_get; - gc->set = mpc8xxx_gpio_set; - gc->to_irq = mpc8xxx_gpio_to_irq; - - ret = of_mm_gpiochip_add(np, mm_gc); - if (ret) - goto err; - - hwirq = irq_of_parse_and_map(np, 0); - if (hwirq == NO_IRQ) - goto skip_irq; - - mpc8xxx_gc->irq = - irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, MPC8XXX_GPIO_PINS, - &mpc8xxx_gpio_irq_ops, MPC8XXX_GPIO_PINS); - if (!mpc8xxx_gc->irq) - goto skip_irq; - - id = of_match_node(mpc8xxx_gpio_ids, np); - if (id) - mpc8xxx_gc->of_dev_id_data = id->data; - - mpc8xxx_gc->irq->host_data = mpc8xxx_gc; - - /* ack and mask all irqs */ - out_be32(mm_gc->regs + GPIO_IER, 0xffffffff); - out_be32(mm_gc->regs + GPIO_IMR, 0); - - irq_set_handler_data(hwirq, mpc8xxx_gc); - irq_set_chained_handler(hwirq, mpc8xxx_gpio_irq_cascade); - -skip_irq: - return; - -err: - pr_err("%s: registration failed with status %d\n", - np->full_name, ret); - kfree(mpc8xxx_gc); - - return; -} - -static int __init mpc8xxx_add_gpiochips(void) -{ - struct device_node *np; - - for_each_matching_node(np, mpc8xxx_gpio_ids) - mpc8xxx_add_controller(np); - - return 0; -} -arch_initcall(mpc8xxx_add_gpiochips); diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index d5d3ff3d757e..0842c6f8a3e6 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1285,13 +1285,11 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) | MPIC_GREG_GCONF_MCK); - /* Read feature register, calculate num CPUs and, for non-ISU - * MPICs, num sources as well. On ISU MPICs, sources are counted - * as ISUs are added + /* + * Read feature register. For non-ISU MPICs, num sources as well. On + * ISU MPICs, sources are counted as ISUs are added */ greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0)); - mpic->num_cpus = ((greg_feature & MPIC_GREG_FEATURE_LAST_CPU_MASK) - >> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1; if (isu_size == 0) { if (flags & MPIC_BROKEN_FRR_NIRQS) mpic->num_sources = mpic->irq_count; @@ -1301,10 +1299,18 @@ struct mpic * __init mpic_alloc(struct device_node *node, >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1; } + /* + * The MPIC driver will crash if there are more cores than we + * can initialize, so we may as well catch that problem here. + */ + BUG_ON(num_possible_cpus() > MPIC_MAX_CPUS); + /* Map the per-CPU registers */ - for (i = 0; i < mpic->num_cpus; i++) { - mpic_map(mpic, node, paddr, &mpic->cpuregs[i], - MPIC_INFO(CPU_BASE) + i * MPIC_INFO(CPU_STRIDE), + for_each_possible_cpu(i) { + unsigned int cpu = get_hard_smp_processor_id(i); + + mpic_map(mpic, node, paddr, &mpic->cpuregs[cpu], + MPIC_INFO(CPU_BASE) + cpu * MPIC_INFO(CPU_STRIDE), 0x1000); } @@ -1343,7 +1349,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, } printk(KERN_INFO "mpic: Setting up MPIC \"%s\" version %s at %llx," " max %d CPUs\n", - name, vers, (unsigned long long)paddr, mpic->num_cpus); + name, vers, (unsigned long long)paddr, num_possible_cpus()); printk(KERN_INFO "mpic: ISU size: %d, shift: %d, mask: %x\n", mpic->isu_size, mpic->isu_shift, mpic->isu_mask); @@ -1742,6 +1748,7 @@ void mpic_reset_core(int cpu) struct mpic *mpic = mpic_primary; u32 pir; int cpuid = get_hard_smp_processor_id(cpu); + int i; /* Set target bit for core reset */ pir = mpic_read(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT)); @@ -1753,6 +1760,15 @@ void mpic_reset_core(int cpu) pir &= ~(1 << cpuid); mpic_write(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT), pir); mpic_read(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT)); + + /* Perform 15 EOI on each reset core to clear pending interrupts. + * This is required for FSL CoreNet based devices */ + if (mpic->flags & MPIC_FSL) { + for (i = 0; i < 15; i++) { + _mpic_write(mpic->reg_type, &mpic->cpuregs[cpuid], + MPIC_CPU_EOI, 0); + } + } } #endif /* CONFIG_SMP */ diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index dbfe96bc878a..862f11b3821e 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -834,7 +834,7 @@ static int __init ppc440spe_pciex_core_init(struct device_node *np) return 3; } -static int ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +static int __init ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port) { u32 val = 1 << 24; @@ -872,12 +872,12 @@ static int ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port) return ppc4xx_pciex_port_reset_sdr(port); } -static int ppc440speA_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +static int __init ppc440speA_pciex_init_port_hw(struct ppc4xx_pciex_port *port) { return ppc440spe_pciex_init_port_hw(port); } -static int ppc440speB_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +static int __init ppc440speB_pciex_init_port_hw(struct ppc4xx_pciex_port *port) { int rc = ppc440spe_pciex_init_port_hw(port); @@ -936,7 +936,7 @@ static int __init ppc460ex_pciex_core_init(struct device_node *np) return 2; } -static int ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +static int __init ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port) { u32 val; u32 utlset1; @@ -1092,6 +1092,10 @@ static int __init ppc460sx_pciex_core_init(struct device_node *np) mtdcri(SDR0, PESDR1_460SX_HSSSLEW, 0xFFFF0000); mtdcri(SDR0, PESDR2_460SX_HSSSLEW, 0xFFFF0000); + /* Set HSS PRBS enabled */ + mtdcri(SDR0, PESDR0_460SX_HSSCTLSET, 0x00001130); + mtdcri(SDR0, PESDR2_460SX_HSSCTLSET, 0x00001130); + udelay(100); /* De-assert PLLRESET */ @@ -1122,7 +1126,7 @@ static int __init ppc460sx_pciex_core_init(struct device_node *np) return 2; } -static int ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +static int __init ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port) { if (port->endpoint) @@ -1132,9 +1136,6 @@ static int ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port) dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2, 0, 0x01000000); - /*Gen-1*/ - mtdcri(SDR0, port->sdr_base + PESDRn_460SX_RCEI, 0x08000000); - dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL), PESDRx_RCSSET_RSTPYN); @@ -1148,14 +1149,42 @@ static int ppc460sx_pciex_init_utl(struct ppc4xx_pciex_port *port) { /* Max 128 Bytes */ out_be32 (port->utl_base + PEUTL_PBBSZ, 0x00000000); + /* Assert VRB and TXE - per datasheet turn off addr validation */ + out_be32(port->utl_base + PEUTL_PCTL, 0x80800000); return 0; } +static void __init ppc460sx_pciex_check_link(struct ppc4xx_pciex_port *port) +{ + void __iomem *mbase; + int attempt = 50; + + port->link = 0; + + mbase = ioremap(port->cfg_space.start + 0x10000000, 0x1000); + if (mbase == NULL) { + printk(KERN_ERR "%s: Can't map internal config space !", + port->node->full_name); + goto done; + } + + while (attempt && (0 == (in_le32(mbase + PECFG_460SX_DLLSTA) + & PECFG_460SX_DLLSTA_LINKUP))) { + attempt--; + mdelay(10); + } + if (attempt) + port->link = 1; +done: + iounmap(mbase); + +} + static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = { .core_init = ppc460sx_pciex_core_init, .port_init_hw = ppc460sx_pciex_init_port_hw, .setup_utl = ppc460sx_pciex_init_utl, - .check_link = ppc4xx_pciex_check_link_sdr, + .check_link = ppc460sx_pciex_check_link, }; #endif /* CONFIG_44x */ @@ -1189,7 +1218,7 @@ static void ppc405ex_pcie_phy_reset(struct ppc4xx_pciex_port *port) mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x00101000); } -static int ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +static int __init ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port) { u32 val; @@ -1338,15 +1367,15 @@ static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port) if (rc != 0) return rc; - if (ppc4xx_pciex_hwops->check_link) - ppc4xx_pciex_hwops->check_link(port); - /* * Initialize mapping: disable all regions and configure * CFG and REG regions based on resources in the device tree */ ppc4xx_pciex_port_init_mapping(port); + if (ppc4xx_pciex_hwops->check_link) + ppc4xx_pciex_hwops->check_link(port); + /* * Map UTL */ @@ -1360,13 +1389,23 @@ static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port) ppc4xx_pciex_hwops->setup_utl(port); /* - * Check for VC0 active and assert RDY. + * Check for VC0 active or PLL Locked and assert RDY. */ if (port->sdr_base) { - if (port->link && - ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, - 1 << 16, 1 << 16, 5000)) { - printk(KERN_INFO "PCIE%d: VC0 not active\n", port->index); + if (of_device_is_compatible(port->node, + "ibm,plb-pciex-460sx")){ + if (port->link && ppc4xx_pciex_wait_on_sdr(port, + PESDRn_RCSSTS, + 1 << 12, 1 << 12, 5000)) { + printk(KERN_INFO "PCIE%d: PLL not locked\n", + port->index); + port->link = 0; + } + } else if (port->link && + ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, + 1 << 16, 1 << 16, 5000)) { + printk(KERN_INFO "PCIE%d: VC0 not active\n", + port->index); port->link = 0; } @@ -1573,8 +1612,15 @@ static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port *port, dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAH, lah); dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAL, lal); dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKH, 0x7fffffff); - /* Note that 3 here means enabled | single region */ - dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | 3); + /*Enabled and single region */ + if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx")) + dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, + sa | DCRO_PEGPL_460SX_OMR1MSKL_UOT + | DCRO_PEGPL_OMRxMSKL_VAL); + else + dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, + sa | DCRO_PEGPL_OMR1MSKL_UOT + | DCRO_PEGPL_OMRxMSKL_VAL); break; case 1: out_le32(mbase + PECFG_POM1LAH, pciah); @@ -1582,8 +1628,8 @@ static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port *port, dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAH, lah); dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAL, lal); dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKH, 0x7fffffff); - /* Note that 3 here means enabled | single region */ - dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, sa | 3); + dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, + sa | DCRO_PEGPL_OMRxMSKL_VAL); break; case 2: out_le32(mbase + PECFG_POM2LAH, pciah); @@ -1592,7 +1638,9 @@ static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port *port, dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAL, lal); dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKH, 0x7fffffff); /* Note that 3 here means enabled | IO space !!! */ - dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, sa | 3); + dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, + sa | DCRO_PEGPL_OMR3MSKL_IO + | DCRO_PEGPL_OMRxMSKL_VAL); break; } @@ -1693,6 +1741,9 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port, if (res->flags & IORESOURCE_PREFETCH) sa |= 0x8; + if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx")) + sa |= PCI_BASE_ADDRESS_MEM_TYPE_64; + out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa)); out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa)); @@ -1854,6 +1905,10 @@ static void __init ppc4xx_pciex_port_setup_hose(struct ppc4xx_pciex_port *port) } out_le16(mbase + 0x202, val); + /* Enable Bus master, memory, and io space */ + if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx")) + out_le16(mbase + 0x204, 0x7); + if (!port->endpoint) { /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */ out_le32(mbase + 0x208, 0x06040001); diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h index c39a134e8684..32ce763a375a 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.h +++ b/arch/powerpc/sysdev/ppc4xx_pci.h @@ -464,6 +464,18 @@ #define PECFG_POM2LAL 0x390 #define PECFG_POM2LAH 0x394 +/* 460sx only */ +#define PECFG_460SX_DLLSTA 0x3f8 + +/* 460sx Bit Mappings */ +#define PECFG_460SX_DLLSTA_LINKUP 0x00000010 +#define DCRO_PEGPL_460SX_OMR1MSKL_UOT 0x00000004 + +/* PEGPL Bit Mappings */ +#define DCRO_PEGPL_OMRxMSKL_VAL 0x00000001 +#define DCRO_PEGPL_OMR1MSKL_UOT 0x00000002 +#define DCRO_PEGPL_OMR3MSKL_IO 0x00000002 + /* SDR Bit Mappings */ #define PESDRx_RCSSET_HLDPLB 0x10000000 #define PESDRx_RCSSET_RSTGU 0x01000000 diff --git a/arch/powerpc/sysdev/xics/Makefile b/arch/powerpc/sysdev/xics/Makefile index b75a6059337f..c606aa8ba60a 100644 --- a/arch/powerpc/sysdev/xics/Makefile +++ b/arch/powerpc/sysdev/xics/Makefile @@ -4,3 +4,4 @@ obj-y += xics-common.o obj-$(CONFIG_PPC_ICP_NATIVE) += icp-native.o obj-$(CONFIG_PPC_ICP_HV) += icp-hv.o obj-$(CONFIG_PPC_ICS_RTAS) += ics-rtas.o +obj-$(CONFIG_PPC_POWERNV) += ics-opal.o diff --git a/arch/powerpc/sysdev/xics/icp-native.c b/arch/powerpc/sysdev/xics/icp-native.c index 50e32afe392e..4c79b6fbee1c 100644 --- a/arch/powerpc/sysdev/xics/icp-native.c +++ b/arch/powerpc/sysdev/xics/icp-native.c @@ -276,7 +276,7 @@ static const struct icp_ops icp_native_ops = { #endif }; -int icp_native_init(void) +int __init icp_native_init(void) { struct device_node *np; u32 indx = 0; diff --git a/arch/powerpc/sysdev/xics/ics-opal.c b/arch/powerpc/sysdev/xics/ics-opal.c new file mode 100644 index 000000000000..f7e8609df0d5 --- /dev/null +++ b/arch/powerpc/sysdev/xics/ics-opal.c @@ -0,0 +1,244 @@ +/* + * ICS backend for OPAL managed interrupts. + * + * Copyright 2011 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/cpu.h> +#include <linux/of.h> +#include <linux/spinlock.h> +#include <linux/msi.h> + +#include <asm/prom.h> +#include <asm/smp.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/errno.h> +#include <asm/xics.h> +#include <asm/opal.h> +#include <asm/firmware.h> + +static int ics_opal_mangle_server(int server) +{ + /* No link for now */ + return server << 2; +} + +static int ics_opal_unmangle_server(int server) +{ + /* No link for now */ + return server >> 2; +} + +static void ics_opal_unmask_irq(struct irq_data *d) +{ + unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d); + int64_t rc; + int server; + + pr_devel("ics-hal: unmask virq %d [hw 0x%x]\n", d->irq, hw_irq); + + if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS) + return; + + server = xics_get_irq_server(d->irq, d->affinity, 0); + server = ics_opal_mangle_server(server); + + rc = opal_set_xive(hw_irq, server, DEFAULT_PRIORITY); + if (rc != OPAL_SUCCESS) + pr_err("%s: opal_set_xive(irq=%d [hw 0x%x] server=%x)" + " error %lld\n", + __func__, d->irq, hw_irq, server, rc); +} + +static unsigned int ics_opal_startup(struct irq_data *d) +{ +#ifdef CONFIG_PCI_MSI + /* + * The generic MSI code returns with the interrupt disabled on the + * card, using the MSI mask bits. Firmware doesn't appear to unmask + * at that level, so we do it here by hand. + */ + if (d->msi_desc) + unmask_msi_irq(d); +#endif + + /* unmask it */ + ics_opal_unmask_irq(d); + return 0; +} + +static void ics_opal_mask_real_irq(unsigned int hw_irq) +{ + int server = ics_opal_mangle_server(xics_default_server); + int64_t rc; + + if (hw_irq == XICS_IPI) + return; + + /* Have to set XIVE to 0xff to be able to remove a slot */ + rc = opal_set_xive(hw_irq, server, 0xff); + if (rc != OPAL_SUCCESS) + pr_err("%s: opal_set_xive(0xff) irq=%u returned %lld\n", + __func__, hw_irq, rc); +} + +static void ics_opal_mask_irq(struct irq_data *d) +{ + unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d); + + pr_devel("ics-hal: mask virq %d [hw 0x%x]\n", d->irq, hw_irq); + + if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS) + return; + ics_opal_mask_real_irq(hw_irq); +} + +static int ics_opal_set_affinity(struct irq_data *d, + const struct cpumask *cpumask, + bool force) +{ + unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d); + int16_t server; + int8_t priority; + int64_t rc; + int wanted_server; + + if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS) + return -1; + + rc = opal_get_xive(hw_irq, &server, &priority); + if (rc != OPAL_SUCCESS) { + pr_err("%s: opal_set_xive(irq=%d [hw 0x%x] server=%x)" + " error %lld\n", + __func__, d->irq, hw_irq, server, rc); + return -1; + } + + wanted_server = xics_get_irq_server(d->irq, cpumask, 1); + if (wanted_server < 0) { + char cpulist[128]; + cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask); + pr_warning("%s: No online cpus in the mask %s for irq %d\n", + __func__, cpulist, d->irq); + return -1; + } + server = ics_opal_mangle_server(wanted_server); + + pr_devel("ics-hal: set-affinity irq %d [hw 0x%x] server: 0x%x/0x%x\n", + d->irq, hw_irq, wanted_server, server); + + rc = opal_set_xive(hw_irq, server, priority); + if (rc != OPAL_SUCCESS) { + pr_err("%s: opal_set_xive(irq=%d [hw 0x%x] server=%x)" + " error %lld\n", + __func__, d->irq, hw_irq, server, rc); + return -1; + } + return 0; +} + +static struct irq_chip ics_opal_irq_chip = { + .name = "OPAL ICS", + .irq_startup = ics_opal_startup, + .irq_mask = ics_opal_mask_irq, + .irq_unmask = ics_opal_unmask_irq, + .irq_eoi = NULL, /* Patched at init time */ + .irq_set_affinity = ics_opal_set_affinity +}; + +static int ics_opal_map(struct ics *ics, unsigned int virq); +static void ics_opal_mask_unknown(struct ics *ics, unsigned long vec); +static long ics_opal_get_server(struct ics *ics, unsigned long vec); + +static int ics_opal_host_match(struct ics *ics, struct device_node *node) +{ + return 1; +} + +/* Only one global & state struct ics */ +static struct ics ics_hal = { + .map = ics_opal_map, + .mask_unknown = ics_opal_mask_unknown, + .get_server = ics_opal_get_server, + .host_match = ics_opal_host_match, +}; + +static int ics_opal_map(struct ics *ics, unsigned int virq) +{ + unsigned int hw_irq = (unsigned int)virq_to_hw(virq); + int64_t rc; + int16_t server; + int8_t priority; + + if (WARN_ON(hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)) + return -EINVAL; + + /* Check if HAL knows about this interrupt */ + rc = opal_get_xive(hw_irq, &server, &priority); + if (rc != OPAL_SUCCESS) + return -ENXIO; + + irq_set_chip_and_handler(virq, &ics_opal_irq_chip, handle_fasteoi_irq); + irq_set_chip_data(virq, &ics_hal); + + return 0; +} + +static void ics_opal_mask_unknown(struct ics *ics, unsigned long vec) +{ + int64_t rc; + int16_t server; + int8_t priority; + + /* Check if HAL knows about this interrupt */ + rc = opal_get_xive(vec, &server, &priority); + if (rc != OPAL_SUCCESS) + return; + + ics_opal_mask_real_irq(vec); +} + +static long ics_opal_get_server(struct ics *ics, unsigned long vec) +{ + int64_t rc; + int16_t server; + int8_t priority; + + /* Check if HAL knows about this interrupt */ + rc = opal_get_xive(vec, &server, &priority); + if (rc != OPAL_SUCCESS) + return -1; + return ics_opal_unmangle_server(server); +} + +int __init ics_opal_init(void) +{ + if (!firmware_has_feature(FW_FEATURE_OPAL)) + return -ENODEV; + + /* We need to patch our irq chip's EOI to point to the + * right ICP + */ + ics_opal_irq_chip.irq_eoi = icp_ops->eoi; + + /* Register ourselves */ + xics_register_ics(&ics_hal); + + pr_info("ICS OPAL backend registered\n"); + + return 0; +} diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c index 445c5a01b766..3d93a8ded0f8 100644 --- a/arch/powerpc/sysdev/xics/xics-common.c +++ b/arch/powerpc/sysdev/xics/xics-common.c @@ -409,14 +409,10 @@ void __init xics_init(void) int rc = -1; /* Fist locate ICP */ -#ifdef CONFIG_PPC_ICP_HV if (firmware_has_feature(FW_FEATURE_LPAR)) rc = icp_hv_init(); -#endif -#ifdef CONFIG_PPC_ICP_NATIVE if (rc < 0) rc = icp_native_init(); -#endif if (rc < 0) { pr_warning("XICS: Cannot find a Presentation Controller !\n"); return; @@ -429,9 +425,9 @@ void __init xics_init(void) xics_ipi_chip.irq_eoi = icp_ops->eoi; /* Now locate ICS */ -#ifdef CONFIG_PPC_ICS_RTAS rc = ics_rtas_init(); -#endif + if (rc < 0) + rc = ics_opal_init(); if (rc < 0) pr_warning("XICS: Cannot find a Source Controller !\n"); diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 42541bbcc7fa..13f82f847669 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -340,8 +340,8 @@ int cpus_are_in_xmon(void) static inline int unrecoverable_excp(struct pt_regs *regs) { -#ifdef CONFIG_4xx - /* We have no MSR_RI bit on 4xx, so we simply return false */ +#if defined(CONFIG_4xx) || defined(CONFIG_BOOK3E) + /* We have no MSR_RI bit on 4xx or Book3e, so we simply return false */ return 0; #else return ((regs->msr & MSR_RI) == 0); |