diff options
Diffstat (limited to 'arch/powerpc/kernel/head_44x.S')
| -rw-r--r-- | arch/powerpc/kernel/head_44x.S | 828 |
1 files changed, 656 insertions, 172 deletions
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index 711368b993f2..5ab484ef06a7 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -37,6 +37,7 @@ #include <asm/thread_info.h> #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> +#include <asm/synch.h> #include "head_booke.h" @@ -69,165 +70,7 @@ _ENTRY(_start); mr r27,r7 li r24,0 /* CPU number */ -/* - * In case the firmware didn't do it, we apply some workarounds - * that are good for all 440 core variants here - */ - mfspr r3,SPRN_CCR0 - rlwinm r3,r3,0,0,27 /* disable icache prefetch */ - isync - mtspr SPRN_CCR0,r3 - isync - sync - -/* - * Set up the initial MMU state - * - * We are still executing code at the virtual address - * mappings set by the firmware for the base of RAM. - * - * We first invalidate all TLB entries but the one - * we are running from. We then load the KERNELBASE - * mappings so we can begin to use kernel addresses - * natively and so the interrupt vector locations are - * permanently pinned (necessary since Book E - * implementations always have translation enabled). - * - * TODO: Use the known TLB entry we are running from to - * determine which physical region we are located - * in. This can be used to determine where in RAM - * (on a shared CPU system) or PCI memory space - * (on a DRAMless system) we are located. - * For now, we assume a perfect world which means - * we are located at the base of DRAM (physical 0). - */ - -/* - * Search TLB for entry that we are currently using. - * Invalidate all entries but the one we are using. - */ - /* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */ - mfspr r3,SPRN_PID /* Get PID */ - mfmsr r4 /* Get MSR */ - andi. r4,r4,MSR_IS@l /* TS=1? */ - beq wmmucr /* If not, leave STS=0 */ - oris r3,r3,PPC44x_MMUCR_STS@h /* Set STS=1 */ -wmmucr: mtspr SPRN_MMUCR,r3 /* Put MMUCR */ - sync - - bl invstr /* Find our address */ -invstr: mflr r5 /* Make it accessible */ - tlbsx r23,0,r5 /* Find entry we are in */ - li r4,0 /* Start at TLB entry 0 */ - li r3,0 /* Set PAGEID inval value */ -1: cmpw r23,r4 /* Is this our entry? */ - beq skpinv /* If so, skip the inval */ - tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */ -skpinv: addi r4,r4,1 /* Increment */ - cmpwi r4,64 /* Are we done? */ - bne 1b /* If not, repeat */ - isync /* If so, context change */ - -/* - * Configure and load pinned entry into TLB slot 63. - */ - - lis r3,PAGE_OFFSET@h - ori r3,r3,PAGE_OFFSET@l - - /* Kernel is at the base of RAM */ - li r4, 0 /* Load the kernel physical address */ - - /* Load the kernel PID = 0 */ - li r0,0 - mtspr SPRN_PID,r0 - sync - - /* Initialize MMUCR */ - li r5,0 - mtspr SPRN_MMUCR,r5 - sync - - /* pageid fields */ - clrrwi r3,r3,10 /* Mask off the effective page number */ - ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M - - /* xlat fields */ - clrrwi r4,r4,10 /* Mask off the real page number */ - /* ERPN is 0 for first 4GB page */ - - /* attrib fields */ - /* Added guarded bit to protect against speculative loads/stores */ - li r5,0 - ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G) - - li r0,63 /* TLB slot 63 */ - - tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */ - tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */ - tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */ - - /* Force context change */ - mfmsr r0 - mtspr SPRN_SRR1, r0 - lis r0,3f@h - ori r0,r0,3f@l - mtspr SPRN_SRR0,r0 - sync - rfi - - /* If necessary, invalidate original entry we used */ -3: cmpwi r23,63 - beq 4f - li r6,0 - tlbwe r6,r23,PPC44x_TLB_PAGEID - isync - -4: -#ifdef CONFIG_PPC_EARLY_DEBUG_44x - /* Add UART mapping for early debug. */ - - /* pageid fields */ - lis r3,PPC44x_EARLY_DEBUG_VIRTADDR@h - ori r3,r3,PPC44x_TLB_VALID|PPC44x_TLB_TS|PPC44x_TLB_64K - - /* xlat fields */ - lis r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h - ori r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH - - /* attrib fields */ - li r5,(PPC44x_TLB_SW|PPC44x_TLB_SR|PPC44x_TLB_I|PPC44x_TLB_G) - li r0,62 /* TLB slot 0 */ - - tlbwe r3,r0,PPC44x_TLB_PAGEID - tlbwe r4,r0,PPC44x_TLB_XLAT - tlbwe r5,r0,PPC44x_TLB_ATTRIB - - /* Force context change */ - isync -#endif /* CONFIG_PPC_EARLY_DEBUG_44x */ - - /* Establish the interrupt vector offsets */ - SET_IVOR(0, CriticalInput); - SET_IVOR(1, MachineCheck); - SET_IVOR(2, DataStorage); - SET_IVOR(3, InstructionStorage); - SET_IVOR(4, ExternalInput); - SET_IVOR(5, Alignment); - SET_IVOR(6, Program); - SET_IVOR(7, FloatingPointUnavailable); - SET_IVOR(8, SystemCall); - SET_IVOR(9, AuxillaryProcessorUnavailable); - SET_IVOR(10, Decrementer); - SET_IVOR(11, FixedIntervalTimer); - SET_IVOR(12, WatchdogTimer); - SET_IVOR(13, DataTLBError); - SET_IVOR(14, InstructionTLBError); - SET_IVOR(15, DebugCrit); - - /* Establish the interrupt vector base */ - lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */ - mtspr SPRN_IVPR,r4 + bl init_cpu_state /* * This is where the main kernel code starts. @@ -349,7 +192,7 @@ interrupt_base: #endif /* Data TLB Error Interrupt */ - START_EXCEPTION(DataTLBError) + START_EXCEPTION(DataTLBError44x) mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ mtspr SPRN_SPRG_WSCRATCH1, r11 mtspr SPRN_SPRG_WSCRATCH2, r12 @@ -440,7 +283,7 @@ tlb_44x_patch_hwater_D: mfspr r10,SPRN_DEAR /* Jump to common tlb load */ - b finish_tlb_load + b finish_tlb_load_44x 2: /* The bailout. Restore registers to pre-exception conditions @@ -460,7 +303,7 @@ tlb_44x_patch_hwater_D: * information from different registers and bailout * to a different point. */ - START_EXCEPTION(InstructionTLBError) + START_EXCEPTION(InstructionTLBError44x) mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ mtspr SPRN_SPRG_WSCRATCH1, r11 mtspr SPRN_SPRG_WSCRATCH2, r12 @@ -536,7 +379,7 @@ tlb_44x_patch_hwater_I: mfspr r10,SPRN_SRR0 /* Jump to common TLB load point */ - b finish_tlb_load + b finish_tlb_load_44x 2: /* The bailout. Restore registers to pre-exception conditions @@ -550,15 +393,7 @@ tlb_44x_patch_hwater_I: mfspr r10, SPRN_SPRG_RSCRATCH0 b InstructionStorage - /* Debug Interrupt */ - DEBUG_CRIT_EXCEPTION - -/* - * Local functions - */ - /* - * Both the instruction and data TLB miss get to this * point to load the TLB. * r10 - EA of fault @@ -568,7 +403,7 @@ tlb_44x_patch_hwater_I: * MMUCR - loaded with proper value when we get here * Upon exit, we reload everything and RFI. */ -finish_tlb_load: +finish_tlb_load_44x: /* Combine RPN & ERPN an write WS 0 */ rlwimi r11,r12,0,0,31-PAGE_SHIFT tlbwe r11,r13,PPC44x_TLB_XLAT @@ -601,6 +436,227 @@ finish_tlb_load: mfspr r10, SPRN_SPRG_RSCRATCH0 rfi /* Force context change */ +/* TLB error interrupts for 476 + */ +#ifdef CONFIG_PPC_47x + START_EXCEPTION(DataTLBError47x) + mtspr SPRN_SPRG_WSCRATCH0,r10 /* Save some working registers */ + mtspr SPRN_SPRG_WSCRATCH1,r11 + mtspr SPRN_SPRG_WSCRATCH2,r12 + mtspr SPRN_SPRG_WSCRATCH3,r13 + mfcr r11 + mtspr SPRN_SPRG_WSCRATCH4,r11 + mfspr r10,SPRN_DEAR /* Get faulting address */ + + /* If we are faulting a kernel address, we have to use the + * kernel page tables. + */ + lis r11,PAGE_OFFSET@h + cmplw cr0,r10,r11 + blt+ 3f + lis r11,swapper_pg_dir@h + ori r11,r11, swapper_pg_dir@l + li r12,0 /* MMUCR = 0 */ + b 4f + + /* Get the PGD for the current thread and setup MMUCR */ +3: mfspr r11,SPRN_SPRG3 + lwz r11,PGDIR(r11) + mfspr r12,SPRN_PID /* Get PID */ +4: mtspr SPRN_MMUCR,r12 /* Set MMUCR */ + + /* Mask of required permission bits. Note that while we + * do copy ESR:ST to _PAGE_RW position as trying to write + * to an RO page is pretty common, we don't do it with + * _PAGE_DIRTY. We could do it, but it's a fairly rare + * event so I'd rather take the overhead when it happens + * rather than adding an instruction here. We should measure + * whether the whole thing is worth it in the first place + * as we could avoid loading SPRN_ESR completely in the first + * place... + * + * TODO: Is it worth doing that mfspr & rlwimi in the first + * place or can we save a couple of instructions here ? + */ + mfspr r12,SPRN_ESR + li r13,_PAGE_PRESENT|_PAGE_ACCESSED + rlwimi r13,r12,10,30,30 + + /* Load the PTE */ + /* Compute pgdir/pmd offset */ + rlwinm r12,r10,PPC44x_PGD_OFF_SHIFT,PPC44x_PGD_OFF_MASK_BIT,29 + lwzx r11,r12,r11 /* Get pgd/pmd entry */ + + /* Word 0 is EPN,V,TS,DSIZ */ + li r12,PPC47x_TLB0_VALID | PPC47x_TLBE_SIZE + rlwimi r10,r12,0,32-PAGE_SHIFT,31 /* Insert valid and page size*/ + li r12,0 + tlbwe r10,r12,0 + + /* XXX can we do better ? Need to make sure tlbwe has established + * latch V bit in MMUCR0 before the PTE is loaded further down */ +#ifdef CONFIG_SMP + isync +#endif + + rlwinm. r12,r11,0,0,20 /* Extract pt base address */ + /* Compute pte address */ + rlwimi r12,r10,PPC44x_PTE_ADD_SHIFT,PPC44x_PTE_ADD_MASK_BIT,28 + beq 2f /* Bail if no table */ + lwz r11,0(r12) /* Get high word of pte entry */ + + /* XXX can we do better ? maybe insert a known 0 bit from r11 into the + * bottom of r12 to create a data dependency... We can also use r10 + * as destination nowadays + */ +#ifdef CONFIG_SMP + lwsync +#endif + lwz r12,4(r12) /* Get low word of pte entry */ + + andc. r13,r13,r12 /* Check permission */ + + /* Jump to common tlb load */ + beq finish_tlb_load_47x + +2: /* The bailout. Restore registers to pre-exception conditions + * and call the heavyweights to help us out. + */ + mfspr r11,SPRN_SPRG_RSCRATCH4 + mtcr r11 + mfspr r13,SPRN_SPRG_RSCRATCH3 + mfspr r12,SPRN_SPRG_RSCRATCH2 + mfspr r11,SPRN_SPRG_RSCRATCH1 + mfspr r10,SPRN_SPRG_RSCRATCH0 + b DataStorage + + /* Instruction TLB Error Interrupt */ + /* + * Nearly the same as above, except we get our + * information from different registers and bailout + * to a different point. + */ + START_EXCEPTION(InstructionTLBError47x) + mtspr SPRN_SPRG_WSCRATCH0,r10 /* Save some working registers */ + mtspr SPRN_SPRG_WSCRATCH1,r11 + mtspr SPRN_SPRG_WSCRATCH2,r12 + mtspr SPRN_SPRG_WSCRATCH3,r13 + mfcr r11 + mtspr SPRN_SPRG_WSCRATCH4,r11 + mfspr r10,SPRN_SRR0 /* Get faulting address */ + + /* If we are faulting a kernel address, we have to use the + * kernel page tables. + */ + lis r11,PAGE_OFFSET@h + cmplw cr0,r10,r11 + blt+ 3f + lis r11,swapper_pg_dir@h + ori r11,r11, swapper_pg_dir@l + li r12,0 /* MMUCR = 0 */ + b 4f + + /* Get the PGD for the current thread and setup MMUCR */ +3: mfspr r11,SPRN_SPRG_THREAD + lwz r11,PGDIR(r11) + mfspr r12,SPRN_PID /* Get PID */ +4: mtspr SPRN_MMUCR,r12 /* Set MMUCR */ + + /* Make up the required permissions */ + li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC + + /* Load PTE */ + /* Compute pgdir/pmd offset */ + rlwinm r12,r10,PPC44x_PGD_OFF_SHIFT,PPC44x_PGD_OFF_MASK_BIT,29 + lwzx r11,r12,r11 /* Get pgd/pmd entry */ + + /* Word 0 is EPN,V,TS,DSIZ */ + li r12,PPC47x_TLB0_VALID | PPC47x_TLBE_SIZE + rlwimi r10,r12,0,32-PAGE_SHIFT,31 /* Insert valid and page size*/ + li r12,0 + tlbwe r10,r12,0 + + /* XXX can we do better ? Need to make sure tlbwe has established + * latch V bit in MMUCR0 before the PTE is loaded further down */ +#ifdef CONFIG_SMP + isync +#endif + + rlwinm. r12,r11,0,0,20 /* Extract pt base address */ + /* Compute pte address */ + rlwimi r12,r10,PPC44x_PTE_ADD_SHIFT,PPC44x_PTE_ADD_MASK_BIT,28 + beq 2f /* Bail if no table */ + + lwz r11,0(r12) /* Get high word of pte entry */ + /* XXX can we do better ? maybe insert a known 0 bit from r11 into the + * bottom of r12 to create a data dependency... We can also use r10 + * as destination nowadays + */ +#ifdef CONFIG_SMP + lwsync +#endif + lwz r12,4(r12) /* Get low word of pte entry */ + + andc. r13,r13,r12 /* Check permission */ + + /* Jump to common TLB load point */ + beq finish_tlb_load_47x + +2: /* The bailout. Restore registers to pre-exception conditions + * and call the heavyweights to help us out. + */ + mfspr r11, SPRN_SPRG_RSCRATCH4 + mtcr r11 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 + b InstructionStorage + +/* + * Both the instruction and data TLB miss get to this + * point to load the TLB. + * r10 - free to use + * r11 - PTE high word value + * r12 - PTE low word value + * r13 - free to use + * MMUCR - loaded with proper value when we get here + * Upon exit, we reload everything and RFI. + */ +finish_tlb_load_47x: + /* Combine RPN & ERPN an write WS 1 */ + rlwimi r11,r12,0,0,31-PAGE_SHIFT + tlbwe r11,r13,1 + + /* And make up word 2 */ + li r10,0xf85 /* Mask to apply from PTE */ + rlwimi r10,r12,29,30,30 /* DIRTY -> SW position */ + and r11,r12,r10 /* Mask PTE bits to keep */ + andi. r10,r12,_PAGE_USER /* User page ? */ + beq 1f /* nope, leave U bits empty */ + rlwimi r11,r11,3,26,28 /* yes, copy S bits to U */ +1: tlbwe r11,r13,2 + + /* Done...restore registers and get out of here. + */ + mfspr r11, SPRN_SPRG_RSCRATCH4 + mtcr r11 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 + rfi + +#endif /* CONFIG_PPC_47x */ + + /* Debug Interrupt */ + /* + * This statement needs to exist at the end of the IVPR + * definition just in case you end up taking a debug + * exception within another exception. + */ + DEBUG_CRIT_EXCEPTION + /* * Global functions */ @@ -647,6 +703,428 @@ _GLOBAL(set_context) blr /* + * Init CPU state. This is called at boot time or for secondary CPUs + * to setup initial TLB entries, setup IVORs, etc... + * + */ +_GLOBAL(init_cpu_state) + mflr r22 +#ifdef CONFIG_PPC_47x + /* We use the PVR to differenciate 44x cores from 476 */ + mfspr r3,SPRN_PVR + srwi r3,r3,16 + cmplwi cr0,r3,PVR_476@h + beq head_start_47x + cmplwi cr0,r3,PVR_476_ISS@h + beq head_start_47x +#endif /* CONFIG_PPC_47x */ + +/* + * In case the firmware didn't do it, we apply some workarounds + * that are good for all 440 core variants here + */ + mfspr r3,SPRN_CCR0 + rlwinm r3,r3,0,0,27 /* disable icache prefetch */ + isync + mtspr SPRN_CCR0,r3 + isync + sync + +/* + * Set up the initial MMU state for 44x + * + * We are still executing code at the virtual address + * mappings set by the firmware for the base of RAM. + * + * We first invalidate all TLB entries but the one + * we are running from. We then load the KERNELBASE + * mappings so we can begin to use kernel addresses + * natively and so the interrupt vector locations are + * permanently pinned (necessary since Book E + * implementations always have translation enabled). + * + * TODO: Use the known TLB entry we are running from to + * determine which physical region we are located + * in. This can be used to determine where in RAM + * (on a shared CPU system) or PCI memory space + * (on a DRAMless system) we are located. + * For now, we assume a perfect world which means + * we are located at the base of DRAM (physical 0). + */ + +/* + * Search TLB for entry that we are currently using. + * Invalidate all entries but the one we are using. + */ + /* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */ + mfspr r3,SPRN_PID /* Get PID */ + mfmsr r4 /* Get MSR */ + andi. r4,r4,MSR_IS@l /* TS=1? */ + beq wmmucr /* If not, leave STS=0 */ + oris r3,r3,PPC44x_MMUCR_STS@h /* Set STS=1 */ +wmmucr: mtspr SPRN_MMUCR,r3 /* Put MMUCR */ + sync + + bl invstr /* Find our address */ +invstr: mflr r5 /* Make it accessible */ + tlbsx r23,0,r5 /* Find entry we are in */ + li r4,0 /* Start at TLB entry 0 */ + li r3,0 /* Set PAGEID inval value */ +1: cmpw r23,r4 /* Is this our entry? */ + beq skpinv /* If so, skip the inval */ + tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */ +skpinv: addi r4,r4,1 /* Increment */ + cmpwi r4,64 /* Are we done? */ + bne 1b /* If not, repeat */ + isync /* If so, context change */ + +/* + * Configure and load pinned entry into TLB slot 63. + */ + + lis r3,PAGE_OFFSET@h + ori r3,r3,PAGE_OFFSET@l + + /* Kernel is at the base of RAM */ + li r4, 0 /* Load the kernel physical address */ + + /* Load the kernel PID = 0 */ + li r0,0 + mtspr SPRN_PID,r0 + sync + + /* Initialize MMUCR */ + li r5,0 + mtspr SPRN_MMUCR,r5 + sync + + /* pageid fields */ + clrrwi r3,r3,10 /* Mask off the effective page number */ + ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M + + /* xlat fields */ + clrrwi r4,r4,10 /* Mask off the real page number */ + /* ERPN is 0 for first 4GB page */ + + /* attrib fields */ + /* Added guarded bit to protect against speculative loads/stores */ + li r5,0 + ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G) + + li r0,63 /* TLB slot 63 */ + + tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */ + tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */ + tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */ + + /* Force context change */ + mfmsr r0 + mtspr SPRN_SRR1, r0 + lis r0,3f@h + ori r0,r0,3f@l + mtspr SPRN_SRR0,r0 + sync + rfi + + /* If necessary, invalidate original entry we used */ +3: cmpwi r23,63 + beq 4f + li r6,0 + tlbwe r6,r23,PPC44x_TLB_PAGEID + isync + +4: +#ifdef CONFIG_PPC_EARLY_DEBUG_44x + /* Add UART mapping for early debug. */ + + /* pageid fields */ + lis r3,PPC44x_EARLY_DEBUG_VIRTADDR@h + ori r3,r3,PPC44x_TLB_VALID|PPC44x_TLB_TS|PPC44x_TLB_64K + + /* xlat fields */ + lis r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h + ori r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH + + /* attrib fields */ + li r5,(PPC44x_TLB_SW|PPC44x_TLB_SR|PPC44x_TLB_I|PPC44x_TLB_G) + li r0,62 /* TLB slot 0 */ + + tlbwe r3,r0,PPC44x_TLB_PAGEID + tlbwe r4,r0,PPC44x_TLB_XLAT + tlbwe r5,r0,PPC44x_TLB_ATTRIB + + /* Force context change */ + isync +#endif /* CONFIG_PPC_EARLY_DEBUG_44x */ + + /* Establish the interrupt vector offsets */ + SET_IVOR(0, CriticalInput); + SET_IVOR(1, MachineCheck); + SET_IVOR(2, DataStorage); + SET_IVOR(3, InstructionStorage); + SET_IVOR(4, ExternalInput); + SET_IVOR(5, Alignment); + SET_IVOR(6, Program); + SET_IVOR(7, FloatingPointUnavailable); + SET_IVOR(8, SystemCall); + SET_IVOR(9, AuxillaryProcessorUnavailable); + SET_IVOR(10, Decrementer); + SET_IVOR(11, FixedIntervalTimer); + SET_IVOR(12, WatchdogTimer); + SET_IVOR(13, DataTLBError44x); + SET_IVOR(14, InstructionTLBError44x); + SET_IVOR(15, DebugCrit); + + b head_start_common + + +#ifdef CONFIG_PPC_47x + +#ifdef CONFIG_SMP + +/* Entry point for secondary 47x processors */ +_GLOBAL(start_secondary_47x) + mr r24,r3 /* CPU number */ + + bl init_cpu_state + + /* Now we need to bolt the rest of kernel memory which + * is done in C code. We must be careful because our task + * struct or our stack can (and will probably) be out + * of reach of the initial 256M TLB entry, so we use a + * small temporary stack in .bss for that. This works + * because only one CPU at a time can be in this code + */ + lis r1,temp_boot_stack@h + ori r1,r1,temp_boot_stack@l + addi r1,r1,1024-STACK_FRAME_OVERHEAD + li r0,0 + stw r0,0(r1) + bl mmu_init_secondary + + /* Now we can get our task struct and real stack pointer */ + + /* Get current_thread_info and current */ + lis r1,secondary_ti@ha + lwz r1,secondary_ti@l(r1) + lwz r2,TI_TASK(r1) + + /* Current stack pointer */ + addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD + li r0,0 + stw r0,0(r1) + + /* Kernel stack for exception entry in SPRG3 */ + addi r4,r2,THREAD /* init task's THREAD */ + mtspr SPRN_SPRG3,r4 + + b start_secondary + +#endif /* CONFIG_SMP */ + +/* + * Set up the initial MMU state for 44x + * + * We are still executing code at the virtual address + * mappings set by the firmware for the base of RAM. + */ + +head_start_47x: + /* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */ + mfspr r3,SPRN_PID /* Get PID */ + mfmsr r4 /* Get MSR */ + andi. r4,r4,MSR_IS@l /* TS=1? */ + beq 1f /* If not, leave STS=0 */ + oris r3,r3,PPC47x_MMUCR_STS@h /* Set STS=1 */ +1: mtspr SPRN_MMUCR,r3 /* Put MMUCR */ + sync + + /* Find the entry we are running from */ + bl 1f +1: mflr r23 + tlbsx r23,0,r23 + tlbre r24,r23,0 + tlbre r25,r23,1 + tlbre r26,r23,2 + +/* + * Cleanup time + */ + + /* Initialize MMUCR */ + li r5,0 + mtspr SPRN_MMUCR,r5 + sync + +clear_all_utlb_entries: + + #; Set initial values. + + addis r3,0,0x8000 + addi r4,0,0 + addi r5,0,0 + b clear_utlb_entry + + #; Align the loop to speed things up. + + .align 6 + +clear_utlb_entry: + + tlbwe r4,r3,0 + tlbwe r5,r3,1 + tlbwe r5,r3,2 + addis r3,r3,0x2000 + cmpwi r3,0 + bne clear_utlb_entry + addis r3,0,0x8000 + addis r4,r4,0x100 + cmpwi r4,0 + bne clear_utlb_entry + + #; Restore original entry. + + oris r23,r23,0x8000 /* specify the way */ + tlbwe r24,r23,0 + tlbwe r25,r23,1 + tlbwe r26,r23,2 + +/* + * Configure and load pinned entry into TLB for the kernel core + */ + + lis r3,PAGE_OFFSET@h + ori r3,r3,PAGE_OFFSET@l + + /* Kernel is at the base of RAM */ + li r4, 0 /* Load the kernel physical address */ + + /* Load the kernel PID = 0 */ + li r0,0 + mtspr SPRN_PID,r0 + sync + + /* Word 0 */ + clrrwi r3,r3,12 /* Mask off the effective page number */ + ori r3,r3,PPC47x_TLB0_VALID | PPC47x_TLB0_256M + + /* Word 1 */ + clrrwi r4,r4,12 /* Mask off the real page number */ + /* ERPN is 0 for first 4GB page */ + /* Word 2 */ + li r5,0 + ori r5,r5,PPC47x_TLB2_S_RWX +#ifdef CONFIG_SMP + ori r5,r5,PPC47x_TLB2_M +#endif + + /* We write to way 0 and bolted 0 */ + lis r0,0x8800 + tlbwe r3,r0,0 + tlbwe r4,r0,1 + tlbwe r5,r0,2 + +/* + * Configure SSPCR, ISPCR and USPCR for now to search everything, we can fix + * them up later + */ + LOAD_REG_IMMEDIATE(r3, 0x9abcdef0) + mtspr SPRN_SSPCR,r3 + mtspr SPRN_USPCR,r3 + LOAD_REG_IMMEDIATE(r3, 0x12345670) + mtspr SPRN_ISPCR,r3 + + /* Force context change */ + mfmsr r0 + mtspr SPRN_SRR1, r0 + lis r0,3f@h + ori r0,r0,3f@l + mtspr SPRN_SRR0,r0 + sync + rfi + + /* Invalidate original entry we used */ +3: + rlwinm r24,r24,0,21,19 /* clear the "valid" bit */ + tlbwe r24,r23,0 + addi r24,0,0 + tlbwe r24,r23,1 + tlbwe r24,r23,2 + isync /* Clear out the shadow TLB entries */ + +#ifdef CONFIG_PPC_EARLY_DEBUG_44x + /* Add UART mapping for early debug. */ + + /* Word 0 */ + lis r3,PPC44x_EARLY_DEBUG_VIRTADDR@h + ori r3,r3,PPC47x_TLB0_VALID | PPC47x_TLB0_TS | PPC47x_TLB0_1M + + /* Word 1 */ + lis r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h + ori r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH + + /* Word 2 */ + li r5,(PPC47x_TLB2_S_RW | PPC47x_TLB2_IMG) + + /* Bolted in way 0, bolt slot 5, we -hope- we don't hit the same + * congruence class as the kernel, we need to make sure of it at + * some point + */ + lis r0,0x8d00 + tlbwe r3,r0,0 + tlbwe r4,r0,1 + tlbwe r5,r0,2 + + /* Force context change */ + isync +#endif /* CONFIG_PPC_EARLY_DEBUG_44x */ + + /* Establish the interrupt vector offsets */ + SET_IVOR(0, CriticalInput); + SET_IVOR(1, MachineCheckA); + SET_IVOR(2, DataStorage); + SET_IVOR(3, InstructionStorage); + SET_IVOR(4, ExternalInput); + SET_IVOR(5, Alignment); + SET_IVOR(6, Program); + SET_IVOR(7, FloatingPointUnavailable); + SET_IVOR(8, SystemCall); + SET_IVOR(9, AuxillaryProcessorUnavailable); + SET_IVOR(10, Decrementer); + SET_IVOR(11, FixedIntervalTimer); + SET_IVOR(12, WatchdogTimer); + SET_IVOR(13, DataTLBError47x); + SET_IVOR(14, InstructionTLBError47x); + SET_IVOR(15, DebugCrit); + + /* We configure icbi to invalidate 128 bytes at a time since the + * current 32-bit kernel code isn't too happy with icache != dcache + * block size + */ + mfspr r3,SPRN_CCR0 + oris r3,r3,0x0020 + mtspr SPRN_CCR0,r3 + isync + +#endif /* CONFIG_PPC_47x */ + +/* + * Here we are back to code that is common between 44x and 47x + * + * We proceed to further kernel initialization and return to the + * main kernel entry + */ +head_start_common: + /* Establish the interrupt vector base */ + lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */ + mtspr SPRN_IVPR,r4 + + addis r22,r22,KERNELBASE@h + mtlr r22 + isync + blr + +/* * We put a few things here that have to be page-aligned. This stuff * goes at the beginning of the data segment, which is page-aligned. */ @@ -671,3 +1149,9 @@ swapper_pg_dir: */ abatron_pteptrs: .space 8 + +#ifdef CONFIG_SMP + .align 12 +temp_boot_stack: + .space 1024 +#endif /* CONFIG_SMP */ |