diff options
Diffstat (limited to 'arch/mips/pmc-sierra/yosemite/i2c-yosemite.c')
| -rw-r--r-- | arch/mips/pmc-sierra/yosemite/i2c-yosemite.c | 188 |
1 files changed, 188 insertions, 0 deletions
diff --git a/arch/mips/pmc-sierra/yosemite/i2c-yosemite.c b/arch/mips/pmc-sierra/yosemite/i2c-yosemite.c new file mode 100644 index 000000000000..416da22b3bf4 --- /dev/null +++ b/arch/mips/pmc-sierra/yosemite/i2c-yosemite.c @@ -0,0 +1,188 @@ +/* + * Copyright (C) 2003 PMC-Sierra Inc. + * Author: Manish Lachwani (lachwani@pmc-sierra.com) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * Detailed Description: + * + * This block implements the I2C interface to the slave devices like the + * Atmel 24C32 EEPROM and the MAX 1619 Sensors device. The I2C Master interface + * can be controlled by the SCMB block. And the SCMB block kicks in only when + * using the Ethernet Mode of operation and __not__ the SysAD mode + * + * The SCMB controls the two modes: MDIO and the I2C. The MDIO mode is used to + * communicate with the Quad-PHY from Marvel. The I2C is used to communicate + * with the I2C slave devices. It seems that the driver does not explicitly + * deal with the control of SDA and SCL serial lines. So, the driver will set + * the slave address, drive the command and then the data. The SCMB will then + * control the two serial lines as required. + * + * It seems the documents are very unclear abt this. Hence, I took some time + * out to write the desciption to have an idea of how the I2C can actually + * work. Currently, this Linux driver wont be integrated into the generic Linux + * I2C framework. And finally, the I2C interface is also known as the 2BI + * interface. 2BI means 2-bit interface referring to SDA and SCL serial lines + * respectively. + * + * - Manish Lachwani (12/09/2003) + */ + +#include "i2c-yosemite.h" + +/* + * Poll the I2C interface for the BUSY bit. + */ +static int titan_i2c_poll(void) +{ + int i = 0; + unsigned long val = 0; + + for (i = 0; i < TITAN_I2C_MAX_POLL; i++) { + val = TITAN_I2C_READ(TITAN_I2C_COMMAND); + + if (!(val & 0x8000)) + return 0; + } + + return TITAN_I2C_ERR_TIMEOUT; +} + +/* + * Execute the I2C command + */ +int titan_i2c_xfer(unsigned int slave_addr, titan_i2c_command * cmd, + int size, unsigned int *addr) +{ + int loop = 0, bytes, i; + unsigned int *write_data, data, *read_data; + unsigned long reg_val, val; + + write_data = cmd->data; + read_data = addr; + + TITAN_I2C_WRITE(TITAN_I2C_SLAVE_ADDRESS, slave_addr); + + if (cmd->type == TITAN_I2C_CMD_WRITE) + loop = cmd->write_size; + else + loop = size; + + while (loop > 0) { + if ((cmd->type == TITAN_I2C_CMD_WRITE) || + (cmd->type == TITAN_I2C_CMD_READ_WRITE)) { + + reg_val = TITAN_I2C_DATA; + for (i = 0; i < TITAN_I2C_MAX_WORDS_PER_RW; + ++i, write_data += 2, reg_val += 4) { + if (bytes < cmd->write_size) { + data = write_data[0]; + ++data; + } + + if (bytes < cmd->write_size) { + data = write_data[1]; + ++data; + } + + TITAN_I2C_WRITE(reg_val, data); + } + } + + TITAN_I2C_WRITE(TITAN_I2C_COMMAND, + (unsigned int) (cmd->type << 13)); + if (titan_i2c_poll() != TITAN_I2C_ERR_OK) + return TITAN_I2C_ERR_TIMEOUT; + + if ((cmd->type == TITAN_I2C_CMD_READ) || + (cmd->type == TITAN_I2C_CMD_READ_WRITE)) { + + reg_val = TITAN_I2C_DATA; + for (i = 0; i < TITAN_I2C_MAX_WORDS_PER_RW; + ++i, read_data += 2, reg_val += 4) { + data = TITAN_I2C_READ(reg_val); + + if (bytes < size) { + read_data[0] = data & 0xff; + ++bytes; + } + + if (bytes < size) { + read_data[1] = + ((data >> 8) & 0xff); + ++bytes; + } + } + } + + loop -= (TITAN_I2C_MAX_WORDS_PER_RW * 2); + } + + /* + * Read the Interrupt status and then return the appropriate error code + */ + + val = TITAN_I2C_READ(TITAN_I2C_INTERRUPTS); + if (val & 0x0020) + return TITAN_I2C_ERR_ARB_LOST; + + if (val & 0x0040) + return TITAN_I2C_ERR_NO_RESP; + + if (val & 0x0080) + return TITAN_I2C_ERR_DATA_COLLISION; + + return TITAN_I2C_ERR_OK; +} + +/* + * Init the I2C subsystem of the PMC-Sierra Yosemite board + */ +int titan_i2c_init(titan_i2c_config * config) +{ + unsigned int val; + + /* + * Reset the SCMB and program into the I2C mode + */ + TITAN_I2C_WRITE(TITAN_I2C_SCMB_CONTROL, 0xA000); + TITAN_I2C_WRITE(TITAN_I2C_SCMB_CONTROL, 0x2000); + + /* + * Configure the filtera and clka values + */ + val = TITAN_I2C_READ(TITAN_I2C_SCMB_CLOCK_A); + val |= ((val & ~(0xF000)) | ((config->filtera << 12) & 0xF000)); + val |= ((val & ~(0x03FF)) | (config->clka & 0x03FF)); + TITAN_I2C_WRITE(TITAN_I2C_SCMB_CLOCK_A, val); + + /* + * Configure the filterb and clkb values + */ + val = TITAN_I2C_READ(TITAN_I2C_SCMB_CLOCK_B); + val |= ((val & ~(0xF000)) | ((config->filterb << 12) & 0xF000)); + val |= ((val & ~(0x03FF)) | (config->clkb & 0x03FF)); + TITAN_I2C_WRITE(TITAN_I2C_SCMB_CLOCK_B, val); + + return TITAN_I2C_ERR_OK; +} |