diff options
Diffstat (limited to 'arch/m68k/atari/config.c')
| -rw-r--r-- | arch/m68k/atari/config.c | 56 |
1 files changed, 28 insertions, 28 deletions
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c index e328eaf816e3..565c6f06ab0b 100644 --- a/arch/m68k/atari/config.c +++ b/arch/m68k/atari/config.c @@ -234,44 +234,44 @@ void __init config_atari(void) * Determine hardware present */ - printk("Atari hardware found: "); + pr_info("Atari hardware found:"); if (MACH_IS_MEDUSA) { /* There's no Atari video hardware on the Medusa, but all the * addresses below generate a DTACK so no bus error occurs! */ } else if (hwreg_present(f030_xreg)) { ATARIHW_SET(VIDEL_SHIFTER); - printk("VIDEL "); + pr_cont(" VIDEL"); /* This is a temporary hack: If there is Falcon video * hardware, we assume that the ST-DMA serves SCSI instead of * ACSI. In the future, there should be a better method for * this... */ ATARIHW_SET(ST_SCSI); - printk("STDMA-SCSI "); + pr_cont(" STDMA-SCSI"); } else if (hwreg_present(tt_palette)) { ATARIHW_SET(TT_SHIFTER); - printk("TT_SHIFTER "); + pr_cont(" TT_SHIFTER"); } else if (hwreg_present(&shifter.bas_hi)) { if (hwreg_present(&shifter.bas_lo) && (shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) { ATARIHW_SET(EXTD_SHIFTER); - printk("EXTD_SHIFTER "); + pr_cont(" EXTD_SHIFTER"); } else { ATARIHW_SET(STND_SHIFTER); - printk("STND_SHIFTER "); + pr_cont(" STND_SHIFTER"); } } if (hwreg_present(&st_mfp.par_dt_reg)) { ATARIHW_SET(ST_MFP); - printk("ST_MFP "); + pr_cont(" ST_MFP"); } if (hwreg_present(&tt_mfp.par_dt_reg)) { ATARIHW_SET(TT_MFP); - printk("TT_MFP "); + pr_cont(" TT_MFP"); } if (hwreg_present(&tt_scsi_dma.dma_addr_hi)) { ATARIHW_SET(SCSI_DMA); - printk("TT_SCSI_DMA "); + pr_cont(" TT_SCSI_DMA"); } /* * The ST-DMA address registers aren't readable @@ -284,27 +284,27 @@ void __init config_atari(void) (st_dma.dma_vhi = 0xaa) && (st_dma.dma_hi = 0x55) && st_dma.dma_vhi == 0xaa && st_dma.dma_hi == 0x55)) { ATARIHW_SET(EXTD_DMA); - printk("EXTD_DMA "); + pr_cont(" EXTD_DMA"); } if (hwreg_present(&tt_scsi.scsi_data)) { ATARIHW_SET(TT_SCSI); - printk("TT_SCSI "); + pr_cont(" TT_SCSI"); } if (hwreg_present(&sound_ym.rd_data_reg_sel)) { ATARIHW_SET(YM_2149); - printk("YM2149 "); + pr_cont(" YM2149"); } if (!MACH_IS_MEDUSA && hwreg_present(&tt_dmasnd.ctrl)) { ATARIHW_SET(PCM_8BIT); - printk("PCM "); + pr_cont(" PCM"); } if (hwreg_present(&falcon_codec.unused5)) { ATARIHW_SET(CODEC); - printk("CODEC "); + pr_cont(" CODEC"); } if (hwreg_present(&dsp56k_host_interface.icr)) { ATARIHW_SET(DSP56K); - printk("DSP56K "); + pr_cont(" DSP56K"); } if (hwreg_present(&tt_scc_dma.dma_ctrl) && #if 0 @@ -316,33 +316,33 @@ void __init config_atari(void) #endif ) { ATARIHW_SET(SCC_DMA); - printk("SCC_DMA "); + pr_cont(" SCC_DMA"); } if (scc_test(&atari_scc.cha_a_ctrl)) { ATARIHW_SET(SCC); - printk("SCC "); + pr_cont(" SCC"); } if (scc_test(&st_escc.cha_b_ctrl)) { ATARIHW_SET(ST_ESCC); - printk("ST_ESCC "); + pr_cont(" ST_ESCC"); } if (hwreg_present(&tt_scu.sys_mask)) { ATARIHW_SET(SCU); /* Assume a VME bus if there's a SCU */ ATARIHW_SET(VME); - printk("VME SCU "); + pr_cont(" VME SCU"); } if (hwreg_present((void *)(0xffff9210))) { ATARIHW_SET(ANALOG_JOY); - printk("ANALOG_JOY "); + pr_cont(" ANALOG_JOY"); } if (hwreg_present(blitter.halftone)) { ATARIHW_SET(BLITTER); - printk("BLITTER "); + pr_cont(" BLITTER"); } if (hwreg_present((void *)0xfff00039)) { ATARIHW_SET(IDE); - printk("IDE "); + pr_cont(" IDE"); } #if 1 /* This maybe wrong */ if (!MACH_IS_MEDUSA && hwreg_present(&tt_microwire.data) && @@ -355,31 +355,31 @@ void __init config_atari(void) ATARIHW_SET(MICROWIRE); while (tt_microwire.mask != 0x7ff) ; - printk("MICROWIRE "); + pr_cont(" MICROWIRE"); } #endif if (hwreg_present(&tt_rtc.regsel)) { ATARIHW_SET(TT_CLK); - printk("TT_CLK "); + pr_cont(" TT_CLK"); mach_hwclk = atari_tt_hwclk; mach_set_clock_mmss = atari_tt_set_clock_mmss; } if (hwreg_present(&mste_rtc.sec_ones)) { ATARIHW_SET(MSTE_CLK); - printk("MSTE_CLK "); + pr_cont(" MSTE_CLK"); mach_hwclk = atari_mste_hwclk; mach_set_clock_mmss = atari_mste_set_clock_mmss; } if (!MACH_IS_MEDUSA && hwreg_present(&dma_wd.fdc_speed) && hwreg_write(&dma_wd.fdc_speed, 0)) { ATARIHW_SET(FDCSPEED); - printk("FDC_SPEED "); + pr_cont(" FDC_SPEED"); } if (!ATARIHW_PRESENT(ST_SCSI)) { ATARIHW_SET(ACSI); - printk("ACSI "); + pr_cont(" ACSI"); } - printk("\n"); + pr_cont("\n"); if (CPU_IS_040_OR_060) /* Now it seems to be safe to turn of the tt0 transparent |