diff options
Diffstat (limited to 'arch/arm')
504 files changed, 21732 insertions, 4733 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b2bf019dcefa..138248999df7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -5,7 +5,6 @@ config ARM select ARCH_32BIT_OFF_T select ARCH_HAS_BINFMT_FLAT select ARCH_HAS_DEBUG_VIRTUAL if MMU - select ARCH_HAS_DEVMEM_IS_ALLOWED select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_FORTIFY_SOURCE @@ -25,7 +24,7 @@ config ARM select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_HAVE_CUSTOM_GPIO_H select ARCH_HAS_GCOV_PROFILE_ALL - select ARCH_KEEP_MEMBLOCK if HAVE_ARCH_PFN_VALID || KEXEC + select ARCH_KEEP_MEMBLOCK select ARCH_MIGHT_HAVE_PC_PARPORT select ARCH_NO_SG_CHAIN if !ARM_HAS_SG_CHAIN select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX @@ -35,6 +34,7 @@ config ARM select ARCH_USE_CMPXCHG_LOCKREF select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU select ARCH_WANT_IPC_PARSE_VERSION + select ARCH_WANT_LD_ORPHAN_WARN select BINFMT_FLAT_ARGVP_ENVP_ON_STACK select BUILDTIME_TABLE_SORT if MMU select CLONE_BACKWARDS @@ -56,6 +56,7 @@ config ARM select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW select GENERIC_IRQ_SHOW_LEVEL + select GENERIC_LIB_DEVMEM_IS_ALLOWED select GENERIC_PCI_IOMAP select GENERIC_SCHED_CLOCK select GENERIC_SMP_IDLE_THREAD @@ -69,6 +70,7 @@ config ARM select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL select HAVE_ARCH_MMAP_RND_BITS if MMU + select HAVE_ARCH_PFN_VALID select HAVE_ARCH_SECCOMP select HAVE_ARCH_SECCOMP_FILTER if AEABI && !OABI_COMPAT select HAVE_ARCH_THREAD_STRUCT_WHITELIST @@ -268,8 +270,7 @@ config PHYS_OFFSET hex "Physical address of main memory" if MMU depends on !ARM_PATCH_PHYS_VIRT default DRAM_BASE if !MMU - default 0x00000000 if ARCH_EBSA110 || \ - ARCH_FOOTBRIDGE + default 0x00000000 if ARCH_FOOTBRIDGE default 0x10000000 if ARCH_OMAP1 || ARCH_RPC default 0x20000000 if ARCH_S5PV210 default 0xc0000000 if ARCH_SA1100 @@ -323,7 +324,6 @@ config ARCH_MULTIPLATFORM select AUTO_ZRELADDR select TIMER_OF select COMMON_CLK - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_MULTI_HANDLER select HAVE_PCI select PCI_DOMAINS_GENERIC if PCI @@ -338,25 +338,10 @@ config ARM_SINGLE_ARMV7M select TIMER_OF select COMMON_CLK select CPU_V7M - select GENERIC_CLOCKEVENTS select NO_IOPORT_MAP select SPARSE_IRQ select USE_OF -config ARCH_EBSA110 - bool "EBSA-110" - select ARCH_USES_GETTIMEOFFSET - select CPU_SA110 - select ISA - select NEED_MACH_IO_H - select NEED_MACH_MEMORY_H - select NO_IOPORT_MAP - help - This is an evaluation board for the StrongARM processor available - from Digital. It has limited hardware on-board, including an - Ethernet interface, two PCMCIA sockets, two serial ports and a - parallel port. - config ARCH_EP93XX bool "EP93xx-based" select ARCH_SPARSEMEM_ENABLE @@ -367,7 +352,6 @@ config ARCH_EP93XX select CLKDEV_LOOKUP select CLKSRC_MMIO select CPU_ARM920T - select GENERIC_CLOCKEVENTS select GPIOLIB select HAVE_LEGACY_CLK help @@ -377,7 +361,6 @@ config ARCH_FOOTBRIDGE bool "FootBridge" select CPU_SA110 select FOOTBRIDGE - select GENERIC_CLOCKEVENTS select HAVE_IDE select NEED_MACH_IO_H if !MMU select NEED_MACH_MEMORY_H @@ -405,7 +388,6 @@ config ARCH_IXP4XX select ARCH_SUPPORTS_BIG_ENDIAN select CPU_XSCALE select DMABOUNCE if PCI - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_MULTI_HANDLER select GPIO_IXP4XX select GPIOLIB @@ -421,7 +403,6 @@ config ARCH_IXP4XX config ARCH_DOVE bool "Marvell Dove" select CPU_PJ4 - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_MULTI_HANDLER select GPIOLIB select HAVE_PCI @@ -445,7 +426,6 @@ config ARCH_PXA select CLKSRC_MMIO select TIMER_OF select CPU_XSCALE if !CPU_XSC3 - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_MULTI_HANDLER select GPIO_PXA select GPIOLIB @@ -468,6 +448,7 @@ config ARCH_RPC select HAVE_IDE select HAVE_PATA_PLATFORM select ISA_DMA_API + select LEGACY_TIMER_TICK select NEED_MACH_IO_H select NEED_MACH_MEMORY_H select NO_IOPORT_MAP @@ -485,7 +466,6 @@ config ARCH_SA1100 select COMMON_CLK select CPU_FREQ select CPU_SA1100 - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_MULTI_HANDLER select GPIOLIB select HAVE_IDE @@ -500,7 +480,6 @@ config ARCH_S3C24XX bool "Samsung S3C24XX SoCs" select ATAGS select CLKSRC_SAMSUNG_PWM - select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG select GPIOLIB select GENERIC_IRQ_MULTI_HANDLER @@ -520,11 +499,9 @@ config ARCH_S3C24XX config ARCH_OMAP1 bool "TI OMAP1" depends on MMU - select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_OMAP select CLKDEV_LOOKUP select CLKSRC_MMIO - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select GENERIC_IRQ_MULTI_HANDLER select GPIOLIB @@ -787,7 +764,6 @@ config ARCH_ACORN config PLAT_IOP bool - select GENERIC_CLOCKEVENTS config PLAT_ORION bool @@ -1178,7 +1154,6 @@ config HAVE_SMP config SMP bool "Symmetric Multi-Processing" depends on CPU_V6K || CPU_V7 - depends on GENERIC_CLOCKEVENTS depends on HAVE_SMP depends on MMU || ARM_MPU select IRQ_WORK @@ -1381,7 +1356,6 @@ config ARCH_NR_GPIO config HZ_FIXED int - default 200 if ARCH_EBSA110 default 128 if SOC_AT91RM9200 default 0 @@ -1489,9 +1463,6 @@ config OABI_COMPAT UNPREDICTABLE (in fact it can be predicted that it won't work at all). If in doubt say N. -config ARCH_HAS_HOLES_MEMORYMODEL - bool - config ARCH_SELECT_MEMORY_MODEL bool @@ -1502,12 +1473,10 @@ config ARCH_SPARSEMEM_ENABLE bool select SPARSEMEM_STATIC if SPARSEMEM -config HAVE_ARCH_PFN_VALID - def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM - config HIGHMEM bool "High Memory Support" depends on MMU + select KMAP_LOCAL help The address space of ARM processors is only 4 Gigabytes large and it has to accommodate user address space, kernel address @@ -1597,9 +1566,7 @@ config FORCE_MAX_ZONEORDER a value of 11 means that the largest free memory block is 2^10 pages. config ALIGNMENT_TRAP - bool - depends on CPU_CP15_MMU - default y if !ARCH_EBSA110 + def_bool CPU_CP15_MMU select HAVE_PROC_CPU if PROC_FS help ARM processors cannot fetch/store information which is not @@ -1794,7 +1761,7 @@ config CMDLINE string "Default kernel command string" default "" help - On some architectures (EBSA110 and CATS), there is currently no way + On some architectures (e.g. CATS), there is currently no way for the boot loader to pass arguments to the kernel. For these architectures, you should supply some command-line options at build time by entering them here. As a minimum, you should specify the diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 8986a91a6f31..4ff04201a8cc 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1567,7 +1567,7 @@ config DEBUG_SIRFSOC_UART config DEBUG_UART_FLOW_CONTROL bool "Enable flow control (CTS) for the debug UART" depends on DEBUG_LL - default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC + default y if DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC help Some UART ports are connected to terminals that will use modem control signals to indicate whether they are ready to receive text. @@ -1639,7 +1639,7 @@ config DEBUG_UART_PL01X # Compatibility options for 8250 config DEBUG_UART_8250 - def_bool ARCH_EBSA110 || ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC + def_bool ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC config DEBUG_UART_PHYS hex "Physical base address of debug UART" @@ -1743,7 +1743,6 @@ config DEBUG_UART_PHYS default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2 default 0xe8009000 if DEBUG_R7S9210_SCIF4 default 0xf0000000 if DEBUG_DIGICOLOR_UA0 - default 0xf0000be0 if ARCH_EBSA110 default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE default 0xf7fc9000 if DEBUG_BERLIN_UART @@ -1790,7 +1789,6 @@ config DEBUG_UART_VIRT default 0xc8821000 if DEBUG_RV1108_UART1 default 0xc8912000 if DEBUG_RV1108_UART0 default 0xe0010fe0 if ARCH_RPC - default 0xf0000be0 if ARCH_EBSA110 default 0xf0010000 if DEBUG_ASM9260_UART default 0xf0100000 if DEBUG_DIGICOLOR_UA0 default 0xf01fb000 if DEBUG_NOMADIK_UART diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 3c0a64cefe52..4aaec9599e8a 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -16,10 +16,6 @@ LDFLAGS_vmlinux += --be8 KBUILD_LDFLAGS_MODULE += --be8 endif -# We never want expected sections to be placed heuristically by the -# linker. All sections should be explicitly named in the linker script. -LDFLAGS_vmlinux += $(call ld-option, --orphan-handling=warn) - GZFLAGS :=-9 #KBUILD_CFLAGS +=-pipe @@ -172,7 +168,6 @@ machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx machine-$(CONFIG_ARCH_DAVINCI) += davinci machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor machine-$(CONFIG_ARCH_DOVE) += dove -machine-$(CONFIG_ARCH_EBSA110) += ebsa110 machine-$(CONFIG_ARCH_EFM32) += efm32 machine-$(CONFIG_ARCH_EP93XX) += ep93xx machine-$(CONFIG_ARCH_EXYNOS) += exynos @@ -239,13 +234,6 @@ plat-$(CONFIG_PLAT_ORION) += orion plat-$(CONFIG_PLAT_PXA) += pxa plat-$(CONFIG_PLAT_VERSATILE) += versatile -ifeq ($(CONFIG_ARCH_EBSA110),y) -# This is what happens if you forget the IOCS16 line. -# PCMCIA cards stop working. -CFLAGS_3c589_cs.o :=-DISA_SIXTEEN_BIT_PERIPHERAL -export CFLAGS_3c589_cs.o -endif - # The byte offset of the kernel image in RAM from the start of RAM. TEXT_OFFSET := $(textofs-y) diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index a815b1ae990d..fb521efcc6c2 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -130,7 +130,9 @@ LDFLAGS_vmlinux += --no-undefined # Delete all temporary local symbols LDFLAGS_vmlinux += -X # Report orphan sections -LDFLAGS_vmlinux += $(call ld-option, --orphan-handling=warn) +ifdef CONFIG_LD_ORPHAN_WARN +LDFLAGS_vmlinux += --orphan-handling=warn +endif # Next argument is a linker script LDFLAGS_vmlinux += -T diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 804d66668019..d9cce7238a36 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -1460,6 +1460,9 @@ ENTRY(efi_enter_kernel) @ issued from HYP mode take us to the correct handler code. We @ will disable the MMU before jumping to the kernel proper. @ + ARM( bic r1, r1, #(1 << 30) ) @ clear HSCTLR.TE + THUMB( orr r1, r1, #(1 << 30) ) @ set HSCTLR.TE + mcr p15, 4, r1, c1, c0, 0 adr r0, __hyp_reentry_vectors mcr p15, 4, r0, c12, c0, 0 @ set HYP vector base (HVBAR) isb diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index ce66ffd5a1bb..3d1ea0b25168 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -197,6 +197,7 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \ exynos4412-odroidx.dtb \ exynos4412-odroidx2.dtb \ exynos4412-origen.dtb \ + exynos4412-p4note-n8010.dtb \ exynos4412-smdk4412.dtb \ exynos4412-tiny4412.dtb \ exynos4412-trats2.dtb @@ -339,7 +340,10 @@ dtb-$(CONFIG_ARCH_LPC32XX) += \ lpc3250-ea3250.dtb \ lpc3250-phy3250.dtb dtb-$(CONFIG_ARCH_NPCM7XX) += \ - nuvoton-npcm750-evb.dtb + nuvoton-npcm730-gsj.dtb \ + nuvoton-npcm730-kudo.dtb \ + nuvoton-npcm750-evb.dtb \ + nuvoton-npcm750-runbmc-olympus.dtb dtb-$(CONFIG_MACH_MESON6) += \ meson6-atv1200.dtb dtb-$(CONFIG_MACH_MESON8) += \ @@ -414,6 +418,7 @@ dtb-$(CONFIG_SOC_IMX53) += \ imx53-usbarmory.dtb \ imx53-voipac-bsb.dtb dtb-$(CONFIG_SOC_IMX6Q) += \ + imx6dl-alti6p.dtb \ imx6dl-apf6dev.dtb \ imx6dl-aristainetos_4.dtb \ imx6dl-aristainetos_7.dtb \ @@ -450,6 +455,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-icore.dtb \ imx6dl-icore-mipi.dtb \ imx6dl-icore-rqs.dtb \ + imx6dl-lanmcu.dtb \ imx6dl-mamoj.dtb \ imx6dl-nit6xlite.dtb \ imx6dl-nitrogen6x.dtb \ @@ -581,6 +587,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6qp-nitrogen6_max.dtb \ imx6qp-nitrogen6_som2.dtb \ imx6qp-phytec-mira-rdk-nand.dtb \ + imx6qp-prtwd3.dtb \ imx6qp-sabreauto.dtb \ imx6qp-sabresd.dtb \ imx6qp-tx6qp-8037.dtb \ @@ -622,6 +629,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-pico-dwarf.dtb \ imx6ul-pico-hobbit.dtb \ imx6ul-pico-pi.dtb \ + imx6ul-phytec-segin-ff-rdk-emmc.dtb \ imx6ul-phytec-segin-ff-rdk-nand.dtb \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ @@ -641,6 +649,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-colibri-emmc-aster.dtb \ imx7d-colibri-emmc-eval-v3.dtb \ imx7d-colibri-eval-v3.dtb \ + imx7d-flex-concentrator.dtb \ + imx7d-flex-concentrator-mfg.dtb \ imx7d-mba7.dtb \ imx7d-meerkat96.dtb \ imx7d-nitrogen7.dtb \ @@ -1066,6 +1076,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp157a-iot-box.dtb \ stm32mp157a-stinger96.dtb \ stm32mp157c-dhcom-pdk2.dtb \ + stm32mp157c-dhcom-picoitx.dtb \ stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ stm32mp157c-ev1.dtb \ @@ -1192,6 +1203,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-nanopi-m1-plus.dtb \ sun8i-h3-nanopi-neo.dtb \ sun8i-h3-nanopi-neo-air.dtb \ + sun8i-h3-nanopi-r1.dtb \ sun8i-h3-orangepi-2.dtb \ sun8i-h3-orangepi-lite.dtb \ sun8i-h3-orangepi-one.dtb \ @@ -1201,12 +1213,14 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-plus2e.dtb \ sun8i-h3-orangepi-zero-plus2.dtb \ sun8i-h3-rervision-dvk.dtb \ + sun8i-h3-zeropi.dtb \ sun8i-h3-emlid-neutis-n5h3-devboard.dtb \ sun8i-r16-bananapi-m2m.dtb \ sun8i-r16-nintendo-nes-classic.dtb \ sun8i-r16-nintendo-super-nes-classic.dtb \ sun8i-r16-parrot.dtb \ sun8i-r40-bananapi-m2-ultra.dtb \ + sun8i-s3-elimo-initium.dtb \ sun8i-s3-lichee-zero-plus.dtb \ sun8i-s3-pinecube.dtb \ sun8i-t3-cqa3t-bv3.dtb \ @@ -1241,7 +1255,8 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ - tegra30-colibri-eval-v3.dtb + tegra30-colibri-eval-v3.dtb \ + tegra30-ouya.dtb dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \ tegra114-dalmore.dtb \ tegra114-roth.dtb \ @@ -1302,6 +1317,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zc770-xm013.dtb \ zynq-zed.dtb \ zynq-zturn.dtb \ + zynq-zturn-v5.dtb \ zynq-zybo.dtb \ zynq-zybo-z7.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ @@ -1319,6 +1335,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb dtb-$(CONFIG_MACH_ARMADA_38X) += \ + armada-382-rd-ac3x-48g4x2xl.dtb \ armada-385-clearfog-gtr-s4.dtb \ armada-385-clearfog-gtr-l8.dtb \ armada-385-db-88f6820-amc.dtb \ @@ -1340,6 +1357,12 @@ dtb-$(CONFIG_MACH_ARMADA_39X) += \ armada-398-db.dtb dtb-$(CONFIG_MACH_ARMADA_XP) += \ armada-xp-axpwifiap.dtb \ + armada-xp-crs305-1g-4s.dtb \ + armada-xp-crs305-1g-4s-bit.dtb \ + armada-xp-crs326-24g-2s.dtb \ + armada-xp-crs326-24g-2s-bit.dtb \ + armada-xp-crs328-4c-20s-4s.dtb \ + armada-xp-crs328-4c-20s-4s-bit.dtb \ armada-xp-db.dtb \ armada-xp-db-dxbc2.dtb \ armada-xp-db-xc3-24g4xg.dtb \ @@ -1372,6 +1395,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb dtb-$(CONFIG_ARCH_MSTARV7) += \ mstar-infinity-msc313-breadbee_crust.dtb \ + mstar-infinity2m-ssd202d-ssd201htv2.dtb \ mstar-infinity3-msc313e-breadbee.dtb \ mstar-mercury5-ssc8336n-midrived08.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb @@ -1381,7 +1405,9 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-amd-ethanolx.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ + aspeed-bmc-bytedance-g220a.dtb \ aspeed-bmc-facebook-cmm.dtb \ + aspeed-bmc-facebook-galaxy100.dtb \ aspeed-bmc-facebook-minipack.dtb \ aspeed-bmc-facebook-tiogapass.dtb \ aspeed-bmc-facebook-wedge40.dtb \ @@ -1390,6 +1416,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-yamp.dtb \ aspeed-bmc-facebook-yosemitev2.dtb \ aspeed-bmc-ibm-rainier.dtb \ + aspeed-bmc-ibm-rainier-4u.dtb \ aspeed-bmc-intel-s2600wf.dtb \ aspeed-bmc-inspur-fp5280g2.dtb \ aspeed-bmc-lenovo-hr630.dtb \ diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index b7f64c7ba83d..3ea286180382 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -168,7 +168,7 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index c696d57cf364..69acaf4ea0f3 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -241,6 +241,30 @@ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_OUTPUT, MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */ >; }; + + /* E1 */ + eqep0_pins: pinmux_eqep0_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT, MUX_MODE1) /* (B12) mcasp0_aclkr.eQEP0A_in */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_INPUT, MUX_MODE1) /* (C13) mcasp0_fsr.eQEP0B_in */ + >; + }; + + /* E2 */ + eqep1_pins: pinmux_eqep1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT, MUX_MODE2) /* (V2) lcd_data12.eQEP1A_in */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_INPUT, MUX_MODE2) /* (V3) lcd_data13.eQEP1B_in */ + >; + }; + + /* E3 */ + eqep2_pins: pinmux_eqep2_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE4) /* (T12) gpmc_ad12.eQEP2A_in */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE4) /* (R12) gpmc_ad13.eQEP2B_in */ + >; + }; }; &uart0 { @@ -419,3 +443,33 @@ line-name = "LS_BUF_EN"; }; }; + +&epwmss0 { + status = "okay"; +}; + +&eqep0 { + pinctrl-names = "default"; + pinctrl-0 = <&eqep0_pins>; + status = "okay"; +}; + +&epwmss1 { + status = "okay"; +}; + +&eqep1 { + pinctrl-names = "default"; + pinctrl-0 = <&eqep1_pins>; + status = "okay"; +}; + +&epwmss2 { + status = "okay"; +}; + +&eqep2 { + pinctrl-names = "default"; + pinctrl-0 = <&eqep2_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index c6fe9db660e2..36d963db4026 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -122,7 +122,7 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) - /* gpmc_wpn.gpio0_30 */ + /* gpmc_wpn.gpio0_31 */ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 12dffccd1ffd..7c6f2c11f0e1 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -229,7 +229,7 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index c9f354fc984a..7ec23d47a429 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -70,7 +70,7 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index 0946fbf1b1fb..0dbc72d726c9 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -238,7 +238,6 @@ &gpmc { compatible = "ti,am3352-gpmc"; - ti,hwmods = "gpmc"; status = "okay"; gpmc,num-waitpins = <2>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index ea20e4bdf040..78088506d25b 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -1,5 +1,8 @@ &l4_wkup { /* 0x44c00000 */ - compatible = "ti,am33xx-l4-wkup", "simple-bus"; + compatible = "ti,am33xx-l4-wkup", "simple-pm-bus"; + power-domains = <&prm_wkup>; + clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_L4_WKUP_CLKCTRL 0>; + clock-names = "fck"; reg = <0x44c00000 0x800>, <0x44c00800 0x800>, <0x44c01000 0x400>, @@ -12,7 +15,7 @@ <0x00200000 0x44e00000 0x100000>; /* segment 2 */ segment@0 { /* 0x44c00000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -22,7 +25,7 @@ }; segment@100000 { /* 0x44d00000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00100000 0x004000>, /* ap 4 */ @@ -34,23 +37,27 @@ compatible = "ti,sysc-omap4", "ti,sysc"; reg = <0x0 0x4>; reg-names = "rev"; + clocks = <&l4_wkup_aon_clkctrl AM3_L4_WKUP_AON_WKUP_M3_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x0 0x4000>; - status = "disabled"; - }; + ranges = <0x00000000 0x00000000 0x4000>, + <0x00080000 0x00080000 0x2000>; - target-module@80000 { /* 0x44d80000, ap 6 10.0 */ - compatible = "ti,sysc"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80000 0x2000>; + wkup_m3: cpu@0 { + compatible = "ti,am3352-wkup-m3"; + reg = <0x00000000 0x4000>, + <0x00080000 0x2000>; + reg-names = "umem", "dmem"; + resets = <&prm_wkup 3>; + reset-names = "rstctrl"; + ti,pm-firmware = "am335x-pm-firmware.elf"; + }; }; }; segment@200000 { /* 0x44e00000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00200000 0x002000>, /* ap 8 */ @@ -274,6 +281,9 @@ compatible = "ti,sysc-omap4", "ti,sysc"; reg = <0x10000 0x4>; reg-names = "rev"; + clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_CONTROL_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00010000 0x00010000>, @@ -433,6 +443,7 @@ <SYSC_IDLE_SMART>, <SYSC_IDLE_SMART_WKUP>; /* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */ + power-domains = <&prm_rtc>; clocks = <&l4_rtc_clkctrl AM3_L4_RTC_RTC_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; @@ -658,7 +669,10 @@ }; &l4_fast { /* 0x4a000000 */ - compatible = "ti,am33xx-l4-fast", "simple-bus"; + compatible = "ti,am33xx-l4-fast", "simple-pm-bus"; + power-domains = <&prm_per>; + clocks = <&l4hs_clkctrl AM3_L4HS_L4_HS_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4a000000 0x800>, <0x4a000800 0x800>, <0x4a001000 0x400>; @@ -668,7 +682,7 @@ ranges = <0x00000000 0x4a000000 0x1000000>; /* segment 0 */ segment@0 { /* 0x4a000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -837,7 +851,10 @@ }; &l4_per { /* 0x48000000 */ - compatible = "ti,am33xx-l4-per", "simple-bus"; + compatible = "ti,am33xx-l4-per", "simple-pm-bus"; + power-domains = <&prm_per>; + clocks = <&l4ls_clkctrl AM3_L4LS_L4_LS_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48000000 0x800>, <0x48000800 0x800>, <0x48001000 0x400>, @@ -855,7 +872,7 @@ <0x46400000 0x46400000 0x400000>; /* l3 data port */ segment@0 { /* 0x48000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -1466,7 +1483,7 @@ }; segment@100000 { /* 0x48100000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0008c000 0x0018c000 0x001000>, /* ap 42 */ @@ -1850,13 +1867,31 @@ }; segment@200000 { /* 0x48200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; + ranges = <0x00000000 0x00200000 0x010000>; + + target-module@0 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + power-domains = <&prm_mpu>; + clocks = <&mpu_clkctrl AM3_MPU_MPU_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x10000>; + + mpu@0 { + compatible = "ti,omap3-mpu"; + pm-sram = <&pm_sram_code + &pm_sram_data>; + }; + }; }; segment@300000 { /* 0x48300000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00300000 0x001000>, /* ap 66 */ @@ -1923,6 +1958,15 @@ status = "disabled"; }; + eqep0: counter@180 { + compatible = "ti,am3352-eqep"; + reg = <0x180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "sysclkout"; + interrupts = <79>; + status = "disabled"; + }; + ehrpwm0: pwm@200 { compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm"; @@ -1975,6 +2019,15 @@ status = "disabled"; }; + eqep1: counter@180 { + compatible = "ti,am3352-eqep"; + reg = <0x180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "sysclkout"; + interrupts = <88>; + status = "disabled"; + }; + ehrpwm1: pwm@200 { compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm"; @@ -2027,6 +2080,15 @@ status = "disabled"; }; + eqep2: counter@180 { + compatible = "ti,am3352-eqep"; + reg = <0x180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "sysclkout"; + interrupts = <89>; + status = "disabled"; + }; + ehrpwm2: pwm@200 { compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm"; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 4c2298024137..5b213a1e68bb 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -144,11 +144,28 @@ }; }; - pmu@4b000000 { - compatible = "arm,cortex-a8-pmu"; - interrupts = <3>; - reg = <0x4b000000 0x1000000>; - ti,hwmods = "debugss"; + target-module@4b000000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + clocks = <&l3_clkctrl AM3_L3_L3_INSTR_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b000000 0x1000000>; + + target-module@140000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + clocks = <&l3_aon_clkctrl AM3_L3_AON_DEBUGSS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x140000 0xec0000>; + + pmu@0 { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + }; + }; }; /* @@ -157,12 +174,6 @@ */ soc { compatible = "ti,omap-infra"; - mpu { - compatible = "ti,omap3-mpu"; - ti,hwmods = "mpu"; - pm-sram = <&pm_sram_code - &pm_sram_data>; - }; }; /* @@ -173,21 +184,15 @@ * the whole bus hierarchy. */ ocp: ocp { - compatible = "simple-bus"; + compatible = "simple-pm-bus"; + power-domains = <&prm_per>; + clocks = <&l3_clkctrl AM3_L3_L3_MAIN_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges; - ti,hwmods = "l3_main"; l4_wkup: interconnect@44c00000 { - wkup_m3: wkup_m3@100000 { - compatible = "ti,am3352-wkup-m3"; - reg = <0x100000 0x4000>, - <0x180000 0x2000>; - reg-names = "umem", "dmem"; - ti,hwmods = "wkup_m3"; - ti,pm-firmware = "am335x-pm-firmware.elf"; - }; }; l4_per: interconnect@48000000 { }; @@ -458,53 +463,89 @@ }; }; - ocmcram: sram@40300000 { - compatible = "mmio-sram"; - reg = <0x40300000 0x10000>; /* 64k */ - ranges = <0x0 0x40300000 0x10000>; + target-module@40300000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + clocks = <&l3_clkctrl AM3_L3_OCMCRAM_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; #address-cells = <1>; #size-cells = <1>; - - pm_sram_code: pm-code-sram@0 { - compatible = "ti,sram"; - reg = <0x0 0x1000>; - protect-exec; - }; - - pm_sram_data: pm-data-sram@1000 { - compatible = "ti,sram"; - reg = <0x1000 0x1000>; - pool; + ranges = <0 0x40300000 0x10000>; + + ocmcram: sram@0 { + compatible = "mmio-sram"; + reg = <0 0x10000>; /* 64k */ + ranges = <0 0 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + + pm_sram_code: pm-code-sram@0 { + compatible = "ti,sram"; + reg = <0x0 0x1000>; + protect-exec; + }; + + pm_sram_data: pm-data-sram@1000 { + compatible = "ti,sram"; + reg = <0x1000 0x1000>; + pool; + }; }; }; - emif: emif@4c000000 { - compatible = "ti,emif-am3352"; - reg = <0x4c000000 0x1000000>; - ti,hwmods = "emif"; - interrupts = <101>; - sram = <&pm_sram_code - &pm_sram_data>; + target-module@4c000000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + reg = <0x4c000000 0x4>; + reg-names = "rev"; + clocks = <&l3_clkctrl AM3_L3_EMIF_CLKCTRL 0>; + clock-names = "fck"; ti,no-idle; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4c000000 0x1000000>; + + emif: emif@0 { + compatible = "ti,emif-am3352"; + reg = <0 0x1000000>; + interrupts = <101>; + sram = <&pm_sram_code + &pm_sram_data>; + }; }; - gpmc: gpmc@50000000 { - compatible = "ti,am3352-gpmc"; - ti,hwmods = "gpmc"; - ti,no-idle-on-init; - reg = <0x50000000 0x2000>; - interrupts = <100>; - dmas = <&edma 52 0>; - dma-names = "rxtx"; - gpmc,num-cs = <7>; - gpmc,num-waitpins = <2>; - #address-cells = <2>; + target-module@50000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x50000000 4>, + <0x50000010 4>, + <0x50000014 4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + clocks = <&l3s_clkctrl AM3_L3S_GPMC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; #size-cells = <1>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - status = "disabled"; + ranges = <0x50000000 0x50000000 0x00001000>, /* regs */ + <0x00000000 0x00000000 0x40000000>; /* data */ + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + reg = <0x50000000 0x2000>; + interrupts = <100>; + dmas = <&edma 52 0>; + dma-names = "rxtx"; + gpmc,num-cs = <7>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; }; sham_target: target-module@53100000 { @@ -601,12 +642,20 @@ compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; reg = <0xc00 0x100>; #reset-cells = <1>; + #power-domain-cells = <0>; }; prm_wkup: prm@d00 { compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; reg = <0xd00 0x100>; #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + prm_mpu: prm@e00 { + compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; + reg = <0xe00 0x100>; + #power-domain-cells = <0>; }; prm_device: prm@f00 { @@ -615,16 +664,31 @@ #reset-cells = <1>; }; + prm_rtc: prm@1000 { + compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; + reg = <0x1000 0x100>; + #power-domain-cells = <0>; + }; + prm_gfx: prm@1100 { compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; reg = <0x1100 0x100>; #power-domain-cells = <0>; #reset-cells = <1>; }; + + prm_cefuse: prm@1200 { + compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; + reg = <0x1200 0x100>; + #power-domain-cells = <0>; + }; }; /* Preferred always-on timer for clocksource */ &timer1_target { + clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_TIMER1_CLKCTRL 0>, + <&l4_wkup_clkctrl AM3_L4_WKUP_L4_WKUP_CLKCTRL 0>; + clock-names = "fck", "ick"; ti,no-reset-on-init; ti,no-idle; timer@0 { @@ -635,6 +699,9 @@ /* Preferred timer for clockevent */ &timer2_target { + clocks = <&l4ls_clkctrl AM3_L4LS_TIMER2_CLKCTRL 0>, + <&l4ls_clkctrl AM3_L4LS_L4_LS_CLKCTRL 0>; + clock-names = "fck", "ick"; ti,no-reset-on-init; ti,no-idle; timer@0 { diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 878406b120be..57a85a6c34a2 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -107,12 +107,6 @@ soc { compatible = "ti,omap-infra"; - mpu { - compatible = "ti,omap4-mpu"; - ti,hwmods = "mpu"; - pm-sram = <&pm_sram_code - &pm_sram_data>; - }; }; gic: interrupt-controller@48241000 { @@ -161,40 +155,48 @@ }; ocp@44000000 { - compatible = "ti,am4372-l3-noc", "simple-bus"; + compatible = "simple-pm-bus"; + power-domains = <&prm_per>; + clocks = <&l3_clkctrl AM4_L3_L3_MAIN_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges; - ti,hwmods = "l3_main"; ti,no-idle; - reg = <0x44000000 0x400000 - 0x44800000 0x400000>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + l3-noc@44000000 { + compatible = "ti,am4372-l3-noc"; + reg = <0x44000000 0x400000>, + <0x44800000 0x400000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + }; l4_wkup: interconnect@44c00000 { - wkup_m3: wkup_m3@100000 { - compatible = "ti,am4372-wkup-m3"; - reg = <0x100000 0x4000>, - <0x180000 0x2000>; - reg-names = "umem", "dmem"; - ti,hwmods = "wkup_m3"; - ti,pm-firmware = "am335x-pm-firmware.elf"; - }; }; l4_per: interconnect@48000000 { }; l4_fast: interconnect@4a000000 { }; - emif: emif@4c000000 { - compatible = "ti,emif-am4372"; - reg = <0x4c000000 0x1000000>; - ti,hwmods = "emif"; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + target-module@4c000000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + reg = <0x4c000000 0x4>; + reg-names = "rev"; + clocks = <&emif_clkctrl AM4_EMIF_EMIF_CLKCTRL 0>; + clock-names = "fck"; ti,no-idle; - sram = <&pm_sram_code - &pm_sram_data>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4c000000 0x1000000>; + + emif: emif@0 { + compatible = "ti,emif-am4372"; + reg = <0 0x1000000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + sram = <&pm_sram_code + &pm_sram_data>; + }; }; target-module@49000000 { @@ -434,24 +436,41 @@ ranges = <0x0 0x54400000 0x80000>; }; - gpmc: gpmc@50000000 { - compatible = "ti,am3352-gpmc"; - ti,hwmods = "gpmc"; - dmas = <&edma 52 0>; - dma-names = "rxtx"; - clocks = <&l3s_gclk>; + target-module@50000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x50000000 4>, + <0x50000010 4>, + <0x50000014 4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + clocks = <&l3s_clkctrl AM4_L3S_GPMC_CLKCTRL 0>; clock-names = "fck"; - reg = <0x50000000 0x2000>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - gpmc,num-cs = <7>; - gpmc,num-waitpins = <2>; - #address-cells = <2>; + #address-cells = <1>; #size-cells = <1>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - status = "disabled"; + ranges = <0x50000000 0x50000000 0x00001000>, /* regs */ + <0x00000000 0x00000000 0x40000000>; /* data */ + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + dmas = <&edma 52 0>; + dma-names = "rxtx"; + clocks = <&l3s_gclk>; + clock-names = "fck"; + reg = <0x50000000 0x2000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + gpmc,num-cs = <7>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; }; target-module@47900000 { @@ -484,23 +503,33 @@ }; }; - ocmcram: sram@40300000 { - compatible = "mmio-sram"; - reg = <0x40300000 0x40000>; /* 256k */ - ranges = <0x0 0x40300000 0x40000>; + target-module@40300000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + clocks = <&l3_clkctrl AM4_L3_OCMCRAM_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0x40300000 0x40000>; - pm_sram_code: pm-code-sram@0 { - compatible = "ti,sram"; - reg = <0x0 0x1000>; - protect-exec; - }; - - pm_sram_data: pm-data-sram@1000 { - compatible = "ti,sram"; - reg = <0x1000 0x1000>; - pool; + ocmcram: sram@0 { + compatible = "mmio-sram"; + reg = <0 0x40000>; /* 256k */ + ranges = <0 0 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + + pm_sram_code: pm-code-sram@0 { + compatible = "ti,sram"; + reg = <0x0 0x1000>; + protect-exec; + }; + + pm_sram_data: pm-data-sram@1000 { + compatible = "ti,sram"; + reg = <0x1000 0x1000>; + pool; + }; }; }; @@ -531,6 +560,12 @@ #include "am43xx-clocks.dtsi" &prcm { + prm_mpu: prm@300 { + compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; + reg = <0x300 0x100>; + #power-domain-cells = <0>; + }; + prm_gfx: prm@400 { compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; reg = <0x400 0x100>; @@ -538,16 +573,36 @@ #reset-cells = <1>; }; + prm_rtc: prm@500 { + compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; + reg = <0x500 0x100>; + #power-domain-cells = <0>; + }; + + prm_tamper: prm@600 { + compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; + reg = <0x600 0x100>; + #power-domain-cells = <0>; + }; + + prm_cefuse: prm@700 { + compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; + reg = <0x700 0x100>; + #power-domain-cells = <0>; + }; + prm_per: prm@800 { compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; reg = <0x800 0x100>; #reset-cells = <1>; + #power-domain-cells = <0>; }; prm_wkup: prm@2000 { compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; reg = <0x2000 0x100>; #reset-cells = <1>; + #power-domain-cells = <0>; }; prm_device: prm@4000 { @@ -561,6 +616,9 @@ &timer1_target { ti,no-reset-on-init; ti,no-idle; + clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_TIMER1_CLKCTRL 0>, + <&l4_wkup_clkctrl AM4_L4_WKUP_L4_WKUP_CLKCTRL 0>; + clock-names = "fck", "ick"; timer@0 { assigned-clocks = <&timer1_fck>; assigned-clock-parents = <&sys_clkin_ck>; @@ -571,6 +629,9 @@ &timer2_target { ti,no-reset-on-init; ti,no-idle; + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER2_CLKCTRL 0>, + <&l4ls_clkctrl AM4_L4LS_L4_LS_CLKCTRL 0>; + clock-names = "fck", "ick"; timer@0 { assigned-clocks = <&timer2_fck>; assigned-clock-parents = <&sys_clkin_ck>; diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index c220dc3c4e0f..e217ffc09770 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -1,5 +1,8 @@ &l4_wkup { /* 0x44c00000 */ - compatible = "ti,am4-l4-wkup", "simple-bus"; + compatible = "ti,am4-l4-wkup", "simple-pm-bus"; + power-domains = <&prm_wkup>; + clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_L4_WKUP_CLKCTRL 0>; + clock-names = "fck"; reg = <0x44c00000 0x800>, <0x44c00800 0x800>, <0x44c01000 0x400>, @@ -12,7 +15,7 @@ <0x00200000 0x44e00000 0x100000>; /* segment 2 */ segment@0 { /* 0x44c00000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -22,7 +25,7 @@ }; segment@100000 { /* 0x44d00000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00100000 0x004000>, /* ap 4 */ @@ -32,19 +35,25 @@ <0x000f0000 0x001f0000 0x010000>; /* ap 8 */ target-module@0 { /* 0x44d00000, ap 4 28.0 */ - compatible = "ti,sysc"; - status = "disabled"; + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x0 0x4>; + reg-names = "rev"; + clocks = <&l4_wkup_aon_clkctrl AM4_L4_WKUP_AON_WKUP_M3_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x0 0x4000>; - }; + ranges = <0x00000000 0x00000000 0x4000>, + <0x00080000 0x00080000 0x2000>; - target-module@80000 { /* 0x44d80000, ap 6 10.0 */ - compatible = "ti,sysc"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80000 0x2000>; + wkup_m3: cpu@0 { + compatible = "ti,am4372-wkup-m3"; + reg = <0x00000000 0x4000>, + <0x00080000 0x2000>; + reg-names = "umem", "dmem"; + resets = <&prm_wkup 3>; + reset-names = "rstctrl"; + ti,pm-firmware = "am335x-pm-firmware.elf"; + }; }; target-module@f0000 { /* 0x44df0000, ap 8 58.0 */ @@ -75,7 +84,7 @@ }; segment@200000 { /* 0x44e00000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00200000 0x001000>, /* ap 9 */ @@ -265,6 +274,9 @@ compatible = "ti,sysc-omap4", "ti,sysc"; reg = <0x10000 0x4>; reg-names = "rev"; + clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_CONTROL_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x10000 0x10000>; @@ -419,6 +431,7 @@ <SYSC_IDLE_SMART>, <SYSC_IDLE_SMART_WKUP>; /* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */ + power-domains = <&prm_rtc>; clocks = <&l4_rtc_clkctrl AM4_L4_RTC_RTC_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; @@ -479,7 +492,10 @@ }; &l4_fast { /* 0x4a000000 */ - compatible = "ti,am4-l4-fast", "simple-bus"; + compatible = "ti,am4-l4-fast", "simple-pm-bus"; + power-domains = <&prm_per>; + clocks = <&l3_clkctrl AM4_L3_L4_HS_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4a000000 0x800>, <0x4a000800 0x800>, <0x4a001000 0x400>; @@ -489,7 +505,7 @@ ranges = <0x00000000 0x4a000000 0x1000000>; /* segment 0 */ segment@0 { /* 0x4a000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -521,7 +537,7 @@ ranges = <0x0 0x100000 0x8000>; mac_sw: switch@0 { - compatible = "ti,am4372-cpsw","ti,cpsw-switch"; + compatible = "ti,am4372-cpsw-switch", "ti,cpsw-switch"; reg = <0x0 0x4000>; ranges = <0 0 0x4000>; clocks = <&cpsw_125mhz_gclk>, <&dpll_clksel_mac_clk>; @@ -594,7 +610,10 @@ }; &l4_per { /* 0x48000000 */ - compatible = "ti,am4-l4-per", "simple-bus"; + compatible = "ti,am4-l4-per", "simple-pm-bus"; + power-domains = <&prm_per>; + clocks = <&l4ls_clkctrl AM4_L4LS_L4_LS_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48000000 0x800>, <0x48000800 0x800>, <0x48001000 0x400>, @@ -612,7 +631,7 @@ <0x46400000 0x46400000 0x400000>; /* l3 data port */ segment@0 { /* 0x48000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -1187,7 +1206,7 @@ }; segment@100000 { /* 0x48100000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0008c000 0x0018c000 0x001000>, /* ap 34 */ @@ -1618,13 +1637,31 @@ }; segment@200000 { /* 0x48200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; + ranges = <0x00000000 0x00200000 0x010000>; + + target-module@0 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + power-domains = <&prm_mpu>; + clocks = <&mpu_clkctrl AM4_MPU_MPU_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x10000>; + + mpu@0 { + compatible = "ti,omap4-mpu"; + pm-sram = <&pm_sram_code + &pm_sram_data>; + }; + }; }; segment@300000 { /* 0x48300000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00300000 0x001000>, /* ap 56 */ @@ -2388,7 +2425,7 @@ ranges = <0 0 0x20000>; usb1: usb@10000 { - compatible = "synopsys,dwc3"; + compatible = "snps,dwc3"; reg = <0x10000 0x10000>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, @@ -2468,7 +2505,7 @@ ranges = <0 0 0x20000>; usb2: usb@10000 { - compatible = "synopsys,dwc3"; + compatible = "snps,dwc3"; reg = <0x10000 0x10000>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 9805e507c695..7f2f24a29e6c 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -426,7 +426,7 @@ status = "disabled"; }; - usb2: usb3@58000 { + usb2: usb@58000 { compatible = "marvell,armada-375-xhci"; reg = <0x58000 0x20000>,<0x5b880 0x80>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts b/arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts new file mode 100644 index 000000000000..584f0d0398a5 --- /dev/null +++ b/arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree file for Marvell Armada 382 reference board + * (RD-AC3X-48G4X2XL) + * + * Copyright (C) 2020 Allied Telesis Labs + */ + +/dts-v1/; +#include "armada-385.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell Armada 382 RD-AC3X"; + compatible = "marvell,rd-ac3x-48g4x2xl", "marvell,rd-ac3x", + "marvell,armada385", "marvell,armada380"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + ethernet0 = ð1; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + eeprom@53{ + compatible = "atmel,24c64"; + reg = <0x53>; + }; + + /* CPLD device present at 0x3c. Function unknown */ +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +ð1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie1 { + /* Port 0, Lane 0 */ + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + reg = <0x00000000 0x00500000>; + label = "u-boot"; + }; + partition@500000{ + reg = <0x00500000 0x00400000>; + label = "u-boot env"; + }; + partition@900000{ + reg = <0x00900000 0x3F700000>; + label = "user"; + }; + }; + }; +}; + +&refclk { + clock-frequency = <200000000>; +}; diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index 768b6c5d2129..646a06420c77 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -12,6 +12,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "armada-385.dtsi" / { @@ -82,6 +83,32 @@ }; }; }; + + sfp: sfp { + compatible = "sff,sfp"; + i2c-bus = <&sfp_i2c>; + tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>; + rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>; + los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <3000>; + + /* + * For now this has to be enabled at boot time by U-Boot when + * a SFP module is present. Read more in the comment in the + * eth2 node below. + */ + status = "disabled"; + }; +}; + +&bm { + status = "okay"; +}; + +&bm_bppi { + status = "okay"; }; /* Connected to 88E6176 switch, port 6 */ @@ -90,6 +117,9 @@ pinctrl-0 = <&ge0_rgmii_pins>; status = "okay"; phy-mode = "rgmii"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <3>; fixed-link { speed = <1000>; @@ -103,6 +133,9 @@ pinctrl-0 = <&ge1_rgmii_pins>; status = "okay"; phy-mode = "rgmii"; + buffer-manager = <&bm>; + bm,pool-long = <1>; + bm,pool-short = <3>; fixed-link { speed = <1000>; @@ -112,9 +145,23 @@ /* WAN port */ ð2 { + /* + * eth2 is connected via a multiplexor to both the SFP cage and to + * ethernet-phy@1. The multiplexor switches the signal to SFP cage when + * a SFP module is present, as determined by the mode-def0 GPIO. + * + * Until kernel supports this configuration properly, in case SFP module + * is present, U-Boot has to enable the sfp node above, remove phy + * handle and add managed = "in-band-status" property. + */ status = "okay"; phy-mode = "sgmii"; - phy = <&phy1>; + phy-handle = <&phy1>; + phys = <&comphy5 2>; + sfp = <&sfp>; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; }; &i2c0 { @@ -127,7 +174,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x70>; - status = "okay"; i2c@0 { #address-cells = <1>; @@ -135,7 +181,115 @@ reg = <0>; /* STM32F0 command interface at address 0x2a */ - /* leds device (in STM32F0) at address 0x2b */ + + led-controller@2b { + compatible = "cznic,turris-omnia-leds"; + reg = <0x2b>; + #address-cells = <1>; + #size-cells = <0>; + + /* + * LEDs are controlled by MCU (STM32F0) at + * address 0x2b. + * + * The driver does not support HW control mode + * for the LEDs yet. Disable the LEDs for now. + * + * Also LED functions are not stable yet: + * - there are 3 LEDs connected via MCU to PCIe + * ports. One of these ports supports mSATA. + * There is no mSATA nor PCIe function. + * For now we use LED_FUNCTION_WLAN, since + * in most cases users have wifi cards in + * these slots + * - there are 2 LEDs dedicated for user: A and + * B. Again there is no such function defined. + * For now we use LED_FUNCTION_INDICATOR + */ + status = "disabled"; + + multi-led@0 { + reg = <0x0>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + multi-led@1 { + reg = <0x1>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; + + multi-led@2 { + reg = <0x2>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_WLAN; + function-enumerator = <3>; + }; + + multi-led@3 { + reg = <0x3>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_WLAN; + function-enumerator = <2>; + }; + + multi-led@4 { + reg = <0x4>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_WLAN; + function-enumerator = <1>; + }; + + multi-led@5 { + reg = <0x5>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_WAN; + }; + + multi-led@6 { + reg = <0x6>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_LAN; + function-enumerator = <4>; + }; + + multi-led@7 { + reg = <0x7>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_LAN; + function-enumerator = <3>; + }; + + multi-led@8 { + reg = <0x8>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_LAN; + function-enumerator = <2>; + }; + + multi-led@9 { + reg = <0x9>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + }; + + multi-led@a { + reg = <0xa>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_LAN; + function-enumerator = <0>; + }; + + multi-led@b { + reg = <0xb>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_POWER; + }; + }; eeprom@54 { compatible = "atmel,24c64"; @@ -177,7 +331,7 @@ /* routed to PCIe2 connector (CN62A) */ }; - i2c@4 { + sfp_i2c: i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; @@ -232,9 +386,8 @@ pinctrl-0 = <&mdio_pins>; status = "okay"; - phy1: phy@1 { - status = "okay"; - compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22"; + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; /* irq is connected to &pcawan pin 7 */ @@ -242,13 +395,18 @@ /* Switch MV88E6176 at address 0x10 */ switch@10 { + pinctrl-names = "default"; + pinctrl-0 = <&swint_pins>; compatible = "marvell,mv88e6085"; #address-cells = <1>; #size-cells = <0>; - dsa,member = <0 0>; + dsa,member = <0 0>; reg = <0x10>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -301,6 +459,11 @@ marvell,function = "gpio"; }; + swint_pins: swint-pins { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + spi0cs0_pins: spi0cs0-pins { marvell,pins = "mpp25"; marvell,function = "spi0"; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 20f8d4667753..4140a5303b48 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -73,13 +73,13 @@ * 14-SFP_TX_DISABLE * 15-SFP_MOD_DEF0 */ - pcie2_0_clkreq { + pcie2-0-clkreq-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_LOW>; input; line-name = "pcie2.0-clkreq"; }; - pcie2_0_w_disable { + pcie2-0-w-disable-hog { gpio-hog; gpios = <7 GPIO_ACTIVE_LOW>; output-low; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi index a0aa1d188f0c..f8a06ae4a3c9 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dtsi +++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi @@ -141,31 +141,31 @@ #gpio-cells = <2>; reg = <0x20>; - pcie1_0_clkreq { + pcie1-0-clkreq-hog { gpio-hog; gpios = <0 GPIO_ACTIVE_LOW>; input; line-name = "pcie1.0-clkreq"; }; - pcie1_0_w_disable { + pcie1-0-w-disable-hog { gpio-hog; gpios = <3 GPIO_ACTIVE_LOW>; output-low; line-name = "pcie1.0-w-disable"; }; - usb3_ilimit { + usb3-ilimit-hog { gpio-hog; gpios = <5 GPIO_ACTIVE_LOW>; input; line-name = "usb3-current-limit"; }; - usb3_power { + usb3-power-hog { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; output-high; line-name = "usb3-power"; }; - m2_devslp { + m2-devslp-hog { gpio-hog; gpios = <11 GPIO_ACTIVE_HIGH>; output-low; diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts index fb49df2a3bce..b3728de3bd3f 100644 --- a/arch/arm/boot/dts/armada-388-helios4.dts +++ b/arch/arm/boot/dts/armada-388-helios4.dts @@ -166,19 +166,19 @@ interrupt-controller; #interrupt-cells = <2>; - board_rev_bit_0 { + board-rev-bit-0-hog { gpio-hog; gpios = <0 GPIO_ACTIVE_LOW>; input; line-name = "board-rev-0"; }; - board_rev_bit_1 { + board-rev-bit-1-hog { gpio-hog; gpios = <1 GPIO_ACTIVE_LOW>; input; line-name = "board-rev-1"; }; - usb3_ilimit { + usb3-ilimit-hog { gpio-hog; gpios = <5 GPIO_ACTIVE_HIGH>; input; diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi index 654648b05c7c..38a052a0312d 100644 --- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -264,11 +264,8 @@ &i2c0 { compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; reg = <0x11000 0x100>; -}; - -&i2c1 { - compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11100 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; }; &mpic { @@ -324,6 +321,11 @@ "mpp2", "mpp3"; marvell,function = "spi0"; }; + + i2c0_pins: i2c-pins-0 { + marvell,pins = "mpp14", "mpp15"; + marvell,function = "i2c0"; + }; }; &spi0 { diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts new file mode 100644 index 000000000000..a022c68dc943 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for MikroTik CRS305-1G-4S+ Bit board + * + * Copyright (C) 2020 Sartura Ltd. + * Author: Luka Kovacic <luka.kovacic@sartura.hr> + */ + +#include "armada-xp-crs305-1g-4s.dtsi" + +/ { + model = "MikroTik CRS305-1G-4S+ Bit"; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x001f0000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x001f0000 0x00010000>; + label = "u-boot-env"; + }; + partition@ubi1 { + reg = <0x00200000 0x03f00000>; + label = "ubi1"; + }; + partition@ubi2 { + reg = <0x04100000 0x03f00000>; + label = "ubi2"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts new file mode 100644 index 000000000000..010b83b54212 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for MikroTik CRS305-1G-4S+ board + * + * Copyright (C) 2020 Sartura Ltd. + * Author: Luka Kovacic <luka.kovacic@sartura.hr> + */ + +#include "armada-xp-crs305-1g-4s.dtsi" + +/ { + model = "MikroTik CRS305-1G-4S+"; +}; + +&spi0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi new file mode 100644 index 000000000000..32fb21b2bf6a --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for CRS305-1G-4S board + * + * Copyright (C) 2016 Allied Telesis Labs + * Copyright (C) 2020 Sartura Ltd. + * + * Based on armada-xp-db.dts + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. + */ + +/dts-v1/; +#include "armada-xp-98dx3236.dtsi" + +/ { + model = "CRS305-1G-4S+"; + compatible = "mikrotik,crs305-1g-4s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */ + }; +}; + +&L2 { + arm,parity-enable; + marvell,ecc-enable; +}; + +&devbus_bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <16>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x001f0000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x001f0000 0x00010000>; + label = "u-boot-env"; + }; + partition@ubi1 { + reg = <0x00200000 0x00e00000>; + label = "ubi1"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts new file mode 100644 index 000000000000..21f442afab1f --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for MikroTik CRS326-24G-2S+ Bit board + * + * Copyright (C) 2020 Sartura Ltd. + * Author: Luka Kovacic <luka.kovacic@sartura.hr> + */ + +#include "armada-xp-crs326-24g-2s.dtsi" + +/ { + model = "MikroTik CRS326-24G-2S+ Bit"; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x001f0000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x001f0000 0x00010000>; + label = "u-boot-env"; + }; + partition@ubi1 { + reg = <0x00200000 0x03f00000>; + label = "ubi1"; + }; + partition@ubi2 { + reg = <0x04100000 0x03f00000>; + label = "ubi2"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts new file mode 100644 index 000000000000..83aef43f66d5 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for MikroTik CRS326-24G-2S+ board + * + * Copyright (C) 2020 Sartura Ltd. + * Author: Luka Kovacic <luka.kovacic@sartura.hr> + */ + +#include "armada-xp-crs326-24g-2s.dtsi" + +/ { + model = "MikroTik CRS326-24G-2S+"; +}; + +&spi0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi new file mode 100644 index 000000000000..f3e1a25ca5f2 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for CRS326-24G-2S board + * + * Copyright (C) 2016 Allied Telesis Labs + * Copyright (C) 2020 Sartura Ltd. + * + * Based on armada-xp-db.dts + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. + */ + +/dts-v1/; +#include "armada-xp-98dx3236.dtsi" + +/ { + model = "CRS326-24G-2S+"; + compatible = "mikrotik,crs326-24g-2s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */ + }; +}; + +&L2 { + arm,parity-enable; + marvell,ecc-enable; +}; + +&devbus_bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <16>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x001f0000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x001f0000 0x00010000>; + label = "u-boot-env"; + }; + partition@ubi1 { + reg = <0x00200000 0x00e00000>; + label = "ubi1"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts new file mode 100644 index 000000000000..e05aee6cdc04 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for MikroTik CRS328-4C-20S-4S+ Bit board + * + * Copyright (C) 2020 Sartura Ltd. + * Author: Luka Kovacic <luka.kovacic@sartura.hr> + */ + +#include "armada-xp-crs328-4c-20s-4s.dtsi" + +/ { + model = "MikroTik CRS328-4C-20S-4S+ Bit"; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x001f0000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x001f0000 0x00010000>; + label = "u-boot-env"; + }; + partition@ubi1 { + reg = <0x00200000 0x03f00000>; + label = "ubi1"; + }; + partition@ubi2 { + reg = <0x04100000 0x03f00000>; + label = "ubi2"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts new file mode 100644 index 000000000000..665757f6e18e --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for MikroTik CRS328-4C-20S-4S+ board + * + * Copyright (C) 2020 Sartura Ltd. + * Author: Luka Kovacic <luka.kovacic@sartura.hr> + */ + +#include "armada-xp-crs328-4c-20s-4s.dtsi" + +/ { + model = "MikroTik CRS328-4C-20S-4S+"; +}; + +&spi0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi new file mode 100644 index 000000000000..c8b1355ce15e --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for CRS328-4C-20S-4S+ board + * + * Copyright (C) 2016 Allied Telesis Labs + * Copyright (C) 2020 Sartura Ltd. + * + * Based on armada-xp-db.dts + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. + */ + +/dts-v1/; +#include "armada-xp-98dx3236.dtsi" + +/ { + model = "CRS328-4C-20S-4S+"; + compatible = "mikrotik,crs328-4c-20s-4s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */ + }; +}; + +&L2 { + arm,parity-enable; + marvell,ecc-enable; +}; + +&devbus_bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <16>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x001f0000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x001f0000 0x00010000>; + label = "u-boot-env"; + }; + partition@ubi1 { + reg = <0x00200000 0x00e00000>; + label = "ubi1"; + }; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index 8d0f4656aa05..89be13197780 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -23,6 +23,15 @@ }; }; +&mdio0 { + status = "okay"; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + &mdio1 { status = "okay"; @@ -50,6 +59,17 @@ }; }; +&mac0 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default>; +}; + + &mac1 { status = "okay"; diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts index 60ba86f3e5bc..96ff0aea64e5 100644 --- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts +++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts @@ -13,6 +13,21 @@ memory@80000000 { reg = <0x80000000 0x20000000>; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + aliases { serial0 = &uart1; serial4 = &uart5; @@ -82,6 +97,50 @@ &pinctrl_adc4_default>; }; +&gpio { + status = "okay"; + gpio-line-names = + /*A0-A7*/ "","","FAULT_LED","CHASSIS_ID_LED","","","","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "CHASSIS_ID_BTN","INTRUDER","AC_LOSS","","","","","", + /*D0-D7*/ "HDT_DBREQ","LOCAL_SPI_ROM_SEL","FPGA_SPI_ROM_SEL","JTAG_MUX_S", + "JTAG_MUX_OE","HDT_SEL","ASERT_WARM_RST_BTN","FPGA_RSVD", + /*E0-E7*/ "","","MON_P0_PWR_BTN","MON_P0_RST_BTN","MON_P0_NMI_BTN", + "MON_P0_PWR_GOOD","MON_PWROK","MON_RESET", + /*F0-F7*/ "MON_P0_PROCHOT","MON_P1_PROCHOT","MON_P0_THERMTRIP", + "MON_P1_THERMTRIP","P0_PRESENT","P1_PRESENT","MON_ATX_PWR_OK","", + /*G0-G7*/ "BRD_REV_ID_3","BRD_REV_ID_2","BRD_REV_ID_1","BRD_REV_ID_0", + "P0_APML_ALERT","P1_APML_ALERT","FPGA ALERT","", + /*H0-H7*/ "BRD_ID_0","BRD_ID_1","BRD_ID_2","BRD_ID_3", + "PCIE_DISCONNECTED","USB_DISCONNECTED","SPARE_0","SPARE_1", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "ASSERT_PWR_BTN","ASSERT_RST_BTN","ASSERT_NMI_BTN", + "ASSERT_LOCAL_LOCK","ASSERT_P0_PROCHOT","ASSERT_P1_PROCHOT", + "ASSERT_CLR_CMOS","ASSERT_BMC_READY", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "P0_VDD_CORE_RUN_VRHOT","P0_VDD_SOC_RUN_VRHOT", + "P0_VDD_MEM_ABCD_SUS_VRHOT","P0_VDD_MEM_EFGH_SUS_VRHOT", + "P1_VDD_CORE_RUN_VRHOT","P1_VDD_SOC_RUN_VRHOT", + "P1_VDD_MEM_ABCD_SUS_VRHOT","P1_VDD_MEM_EFGH_SUS_VRHOT", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "","SENSOR THERM","","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + //APML for P0 &i2c0 { status = "okay"; @@ -139,17 +198,22 @@ &kcs1 { status = "okay"; - kcs_addr = <0x60>; + aspeed,lpc-io-reg = <0x60>; }; &kcs2 { status = "okay"; - kcs_addr = <0x62>; + aspeed,lpc-io-reg = <0x62>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xCA2>; }; &kcs4 { status = "okay"; - kcs_addr = <0x97DE>; + aspeed,lpc-io-reg = <0x97DE>; }; &lpc_snoop { @@ -215,5 +279,12 @@ }; }; +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; +&vhub { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts new file mode 100644 index 000000000000..2feb25b0e43b --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts @@ -0,0 +1,924 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (C) 2020 Bytedance. +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Bytedance G220A BMC"; + compatible = "bytedance,g220a-bmc", "aspeed,ast2500"; + + aliases { + serial4 = &uart5; + i2c14 = &channel_3_0; + i2c15 = &channel_3_1; + i2c16 = &channel_3_2; + i2c17 = &channel_3_3; + i2c18 = &channel_6_0; + i2c19 = &channel_6_1; + i2c20 = &channel_6_2; + i2c21 = &channel_6_3; + i2c22 = &channel_6_4; + i2c23 = &channel_6_5; + i2c24 = &channel_6_6; + i2c25 = &channel_6_7; + i2c26 = &channel_6_8; + i2c27 = &channel_6_9; + i2c28 = &channel_6_10; + i2c29 = &channel_6_11; + i2c30 = &channel_6_12; + i2c31 = &channel_6_13; + i2c32 = &channel_6_14; + i2c33 = &channel_6_15; + i2c34 = &channel_6_16; + i2c35 = &channel_6_17; + i2c36 = &channel_6_18; + i2c37 = &channel_6_19; + i2c38 = &channel_6_20; + i2c39 = &channel_6_21; + i2c40 = &channel_6_22; + i2c41 = &channel_6_23; + i2c42 = &channel_6_24; + i2c43 = &channel_6_25; + i2c44 = &channel_10_0; + i2c45 = &channel_10_1; + i2c46 = &channel_10_2; + i2c47 = &channel_10_3; + i2c48 = &channel_10_4; + i2c49 = &channel_10_5; + i2c50 = &channel_10_6; + i2c51 = &channel_10_7; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@bc000000 { + no-map; + reg = <0xbc000000 0x04000000>; /* 64M */ + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; + }; + + leds { + compatible = "gpio-leds"; + bmc_alive { + label = "bmc_alive"; + gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + led-pattern = <1000 1000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + burn-in-signal { + label = "burn-in"; + gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(R, 5)>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <1000>; + + rear-riser1-presence { + label = "rear-riser1-presence"; + gpios = <&pca0 1 GPIO_ACTIVE_LOW>; + linux,code = <1>; + }; + + alrt-pvddq-cpu0 { + label = "alrt-pvddq-cpu0"; + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; + linux,code = <2>; + }; + + rear-riser0-presence { + label = "rear-riser0-presence"; + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; + linux,code = <3>; + }; + + fault-pvddq-cpu0 { + label = "fault-pvddq-cpu0"; + gpios = <&pca0 10 GPIO_ACTIVE_LOW>; + linux,code = <4>; + }; + + alrt-pvddq-cpu1 { + label = "alrt-pvddq-cpu1"; + gpios = <&pca0 11 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fault-pvddq-cpu1 { + label = "alrt-pvddq-cpu1"; + gpios = <&pca0 12 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fault-pvccin-cpu1 { + label = "fault-pvccin-cpuq"; + gpios = <&pca0 13 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + bmc-rom0-wp { + label = "bmc-rom0-wp"; + gpios = <&pca1 0 GPIO_ACTIVE_LOW>; + linux,code = <8>; + }; + + bmc-rom1-wp { + label = "bmc-rom1-wp"; + gpios = <&pca1 1 GPIO_ACTIVE_LOW>; + linux,code = <9>; + }; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca1 2 GPIO_ACTIVE_LOW>; + linux,code = <10>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca1 3 GPIO_ACTIVE_LOW>; + linux,code = <11>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca1 4 GPIO_ACTIVE_LOW>; + linux,code = <12>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca1 5 GPIO_ACTIVE_LOW>; + linux,code = <13>; + }; + + fan4-presence { + label = "fan4-presence"; + gpios = <&pca1 6 GPIO_ACTIVE_LOW>; + linux,code = <14>; + }; + + fan5-presence { + label = "fan5-presence"; + gpios = <&pca1 7 GPIO_ACTIVE_LOW>; + linux,code = <15>; + }; + + front-bp1-presence { + label = "front-bp1-presence"; + gpios = <&pca1 8 GPIO_ACTIVE_LOW>; + linux,code = <16>; + }; + + rear-bp-presence { + label = "rear-bp-presence"; + gpios = <&pca1 9 GPIO_ACTIVE_LOW>; + linux,code = <17>; + }; + + fault-pvccin-cpu0 { + label = "fault-pvccin-cpu0"; + gpios = <&pca1 10 GPIO_ACTIVE_LOW>; + linux,code = <18>; + }; + + alrt-p1v05-pvcc { + label = "alrt-p1v05-pvcc1"; + gpios = <&pca1 11 GPIO_ACTIVE_LOW>; + linux,code = <19>; + }; + + fault-p1v05-pvccio { + label = "alrt-p1v05-pvcc1"; + gpios = <&pca1 12 GPIO_ACTIVE_LOW>; + linux,code = <20>; + }; + + alrt-p1v8-pvccio { + label = "alrt-p1v8-pvccio"; + gpios = <&pca1 13 GPIO_ACTIVE_LOW>; + linux,code = <21>; + }; + + fault-p1v8-pvccio { + label = "fault-p1v8-pvccio"; + gpios = <&pca1 14 GPIO_ACTIVE_LOW>; + linux,code = <22>; + }; + + front-bp0-presence { + label = "front-bp0-presence"; + gpios = <&pca1 15 GPIO_ACTIVE_LOW>; + linux,code = <23>; + }; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bios"; + spi-max-frequency = <100000000>; + }; +}; + +&adc { + status = "okay"; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /*A0-A7*/ "SMRST_OCP_N","MAC2_LINK","BMC_CPLD_SMB_RST_R_N","BMC_CPLD_GPIO0", + "","","","", + /*B0-B7*/ "BMC_INIT_R_OK","FM_BOARD_REV_ID2","FM_PROJECT_ID7","FAULT_P12V_STBY_N", + "","CPU0_PROCHOT_LVT3_N","","BIOS_LOAD_DEFAULT_R_N", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "FM_PROJECT_ID0","FM_PROJECT_ID1","FM_PROJECT_ID2","FM_PROJECT_ID3", + "FM_PROJECT_ID4","FM_PROJECT_ID5","","", + /*F0-F7*/ "PSU0_PRSNT_N","PSU1_PRSNT_N","","FAULT_P12V_NVME_N", + "BIOS_DEBUG_MODE_R_N","DISABLE_CPU_DDR_R_SPD","COOLING_STRATEGY", + "PCH_GLB_RST_N", + /*G0-G7*/ "P12V_PMBUS_ALERT_N","CPLD_ALERT_N","BMC_RELOAD_N", + "P12V_PVDDQ_PMBUS_ALERT_N","BMC_JTAG_TCK_MUX_R_SEL","","NMI_OUT", + "NMI_BUTTON", + /*H0-H7*/ "BMC_CPLD_JTAG_TDI","BMC_CPLD_JTAG_TDO","BMC_CPLD_JTAG_TCK", + "BMC_CPLD_JTAG_TMS","FM_PROJECT_ID6","FM_BOARD_REV_ID0", + "PCA9546_U70_RST_N","IRQ_SML0_ALERT_N", + /*I0-I7*/ "FAULT_FRONT_RISER_P12V_N","FAULT_OCP_P12V_N","FM_BMC_PCH_SCI_R_N", + "","","","","", + /*J0-J7*/ "FM_CPU0_SKTOCC_N","FM_CPU1_SKTOCC_N","FM_CPU1_DISABLE_COD_N", + "","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "P12V_FAULT_N","PWRGD_P12V_PCIE_RISER","","LEAKAGE_DETECT_INPUT_N", + "","IRQ_SML1_PMBUS_ALERT_N","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","FM_PCH_THERMTRIP_N","CHASSIS_INTRUSION", + /*R0-R7*/ "","PVCCIN_CPU1_SMBALERT_N","BMC_PREQ_R_N","FAULT_P12V_PCIE_RISER_N", + "ALT_P12V_PCIE_RISER_N","BURN_BOARD_N","PVCCIN_CPU0_SMBALERT_N","", + /*S0-S7*/ "BMC_PRDY_N","SIO_POWER_GOOD","FM_BMC_PWR_DEBUG_R_N", + "FM_BMC_XDP_DEBUG_EN","","STRAP_BMC_BATTERY_GPIOS5","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","PWRGD_PSU0_PWROK","CPU1_PROCHOT_LVT3_N","IRQ_BMC_PCH_SMI_LPC_N", + "","","","", + /*Z0-Z7*/ "XDP_PRSNT_N","BMC_XDP_SYS_PWROK","BMC_XDP_JTAG_SEL", + "PCH_BMC_SMI_ACTIVE_R_N","","","","", + /*AA0-AA7*/ "PWRGD_P12V_STBY_OCP","PS_PWROK","RST_PLTRST_BMC_R_N","HDA_SDO_R", + "FM_SLPS4_R_N","PWRGD_PSU1_PWROK","POWER_BUTTON","POWER_OUT", + /*AB0-AB7*/ "","RESET_OUT","SPI_BIOS_MODE_SELECT","POST_COMPLETE","","","","", + /*AC0-AC7*/ "","","","","","","","CPLD_PLTRST_B_N"; +}; + +&kcs3 { + aspeed,lpc-io-reg = <0xCA2>; + status = "okay"; +}; + +&kcs4 { + aspeed,lpc-io-reg = <0xCA4>; + status = "okay"; +}; + +&lpc_snoop { + snoop-ports = <0x80>; + status = "okay"; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default + &pinctrl_nrts2_default + &pinctrl_ndtr2_default + &pinctrl_ndsr2_default + &pinctrl_ncts2_default + &pinctrl_ndcd2_default + &pinctrl_nri2_default>; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + channel_3_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_3_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_3_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_3_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c4 { + status = "okay"; + +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + i2c-switch@72 { + compatible = "nxp,pca9548"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + channel_6_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_6_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_6_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_6_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + channel_6_4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + channel_6_5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + channel_6_6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + channel_6_7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + channel_6_8: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + channel_6_12: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + }; + + channel_6_13: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_6_14: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_6_15: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + channel_6_9: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + channel_6_16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + }; + + channel_6_17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_6_18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_6_19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + channel_6_10: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + channel_6_20: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_6_21: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_6_22: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_6_23: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + channel_6_11: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + channel_6_24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_6_25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; + pca0:pca9555@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + pca1:pca9555@25 { + compatible = "nxp,pca9555"; + reg = <0x25>; + + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + channel_10_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_10_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_10_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_10_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + channel_10_4: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_10_5: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_10_6: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_10_7: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>; + }; + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>; + }; + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>; + }; + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>; + }; + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>; + }; + fan@5 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>; + }; +}; + +&gpio { + pin_gpio_i3 { + gpio-hog; + gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>; + output-low; + line-name = "NCSI_BMC_R_SEL"; + }; + + pin_gpio_b6 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>; + output-low; + line-name = "EN_NCSI_SWITCH_N"; + }; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&vhub { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts new file mode 100644 index 000000000000..dcf213472749 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2020 Facebook Inc. +/dts-v1/; + +#include "ast2400-facebook-netbmc-common.dtsi" + +/ { + model = "Facebook Galaxy 100 BMC"; + compatible = "facebook,galaxy100-bmc", "aspeed,ast2400"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS0,9600n8 root=/dev/ram rw"; + }; + + ast-adc-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 3>, <&adc 4>, <&adc 8>, <&adc 9>; + }; +}; + +&wdt2 { + status = "okay"; + aspeed,reset-type = "system"; +}; + +&fmc { + flash@1 { + status = "okay"; + m25p,fast-read; + label = "spi0.1"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + flash1@0 { + reg = <0x0 0x2000000>; + label = "flash1"; + }; + }; + }; +}; + + +&i2c9 { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&adc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts index c34741dbd268..9eb23e874f19 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts @@ -70,6 +70,162 @@ i2c45 = &imux45; i2c46 = &imux46; i2c47 = &imux47; + + /* + * I2C Switch 24-0071 (channel #0 of 8-0070): 8 channels for + * connecting to left PDB (Power Distribution Board). + */ + i2c48 = &imux48; + i2c49 = &imux49; + i2c50 = &imux50; + i2c51 = &imux51; + i2c52 = &imux52; + i2c53 = &imux53; + i2c54 = &imux54; + i2c55 = &imux55; + + /* + * I2C Switch 25-0072 (channel #1 of 8-0070): 8 channels for + * connecting to right PDB (Power Distribution Board). + */ + i2c56 = &imux56; + i2c57 = &imux57; + i2c58 = &imux58; + i2c59 = &imux59; + i2c60 = &imux60; + i2c61 = &imux61; + i2c62 = &imux62; + i2c63 = &imux63; + + /* + * I2C Switch 26-0076 (channel #2 of 8-0070): 8 channels for + * connecting to top FCM (Fan Control Module). + */ + i2c64 = &imux64; + i2c65 = &imux65; + i2c66 = &imux66; + i2c67 = &imux67; + i2c68 = &imux68; + i2c69 = &imux69; + i2c70 = &imux70; + i2c71 = &imux71; + + /* + * I2C Switch 27-0076 (channel #3 of 8-0070): 8 channels for + * connecting to bottom FCM (Fan Control Module). + */ + i2c72 = &imux72; + i2c73 = &imux73; + i2c74 = &imux74; + i2c75 = &imux75; + i2c76 = &imux76; + i2c77 = &imux77; + i2c78 = &imux78; + i2c79 = &imux79; + + /* + * I2C Switch 40-0073 (channel #0 of 11-0070): connecting + * to PIM (Port Interface Module) #1 (1-based). + */ + i2c80 = &imux80; + i2c81 = &imux81; + i2c82 = &imux82; + i2c83 = &imux83; + i2c84 = &imux84; + i2c85 = &imux85; + i2c86 = &imux86; + i2c87 = &imux87; + + /* + * I2C Switch 41-0073 (channel #1 of 11-0070): connecting + * to PIM (Port Interface Module) #2 (1-based). + */ + i2c88 = &imux88; + i2c89 = &imux89; + i2c90 = &imux90; + i2c91 = &imux91; + i2c92 = &imux92; + i2c93 = &imux93; + i2c94 = &imux94; + i2c95 = &imux95; + + /* + * I2C Switch 42-0073 (channel #2 of 11-0070): connecting + * to PIM (Port Interface Module) #3 (1-based). + */ + i2c96 = &imux96; + i2c97 = &imux97; + i2c98 = &imux98; + i2c99 = &imux99; + i2c100 = &imux100; + i2c101 = &imux101; + i2c102 = &imux102; + i2c103 = &imux103; + + /* + * I2C Switch 43-0073 (channel #3 of 11-0070): connecting + * to PIM (Port Interface Module) #4 (1-based). + */ + i2c104 = &imux104; + i2c105 = &imux105; + i2c106 = &imux106; + i2c107 = &imux107; + i2c108 = &imux108; + i2c109 = &imux109; + i2c110 = &imux110; + i2c111 = &imux111; + + /* + * I2C Switch 44-0073 (channel #4 of 11-0070): connecting + * to PIM (Port Interface Module) #5 (1-based). + */ + i2c112 = &imux112; + i2c113 = &imux113; + i2c114 = &imux114; + i2c115 = &imux115; + i2c116 = &imux116; + i2c117 = &imux117; + i2c118 = &imux118; + i2c119 = &imux119; + + /* + * I2C Switch 45-0073 (channel #5 of 11-0070): connecting + * to PIM (Port Interface Module) #6 (1-based). + */ + i2c120 = &imux120; + i2c121 = &imux121; + i2c122 = &imux122; + i2c123 = &imux123; + i2c124 = &imux124; + i2c125 = &imux125; + i2c126 = &imux126; + i2c127 = &imux127; + + /* + * I2C Switch 46-0073 (channel #6 of 11-0070): connecting + * to PIM (Port Interface Module) #7 (1-based). + */ + i2c128 = &imux128; + i2c129 = &imux129; + i2c130 = &imux130; + i2c131 = &imux131; + i2c132 = &imux132; + i2c133 = &imux133; + i2c134 = &imux134; + i2c135 = &imux135; + + /* + * I2C Switch 47-0073 (channel #7 of 11-0070): connecting + * to PIM (Port Interface Module) #8 (1-based). + */ + i2c136 = &imux136; + i2c137 = &imux137; + i2c138 = &imux138; + i2c139 = &imux139; + i2c140 = &imux140; + i2c141 = &imux141; + i2c142 = &imux142; + i2c143 = &imux143; }; chosen { @@ -184,11 +340,16 @@ &i2c2 { status = "okay"; + /* + * I2C Switch 2-0070 is connecting to SCM (System Controller + * Module). + */ i2c-switch@70 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + i2c-mux-idle-disconnect; imux16: i2c@0 { #address-cells = <1>; @@ -269,29 +430,270 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + i2c-mux-idle-disconnect; + /* + * I2C Switch 8-0070 channel #0: connecting to left PDB + * (Power Distribution Board). + */ imux24: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; + + i2c-switch@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + i2c-mux-idle-disconnect; + + imux48: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux49: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux50: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux51: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux52: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux53: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux54: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux55: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 8-0070 channel #1: connecting to right PDB + * (Power Distribution Board). + */ imux25: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + i2c-switch@72 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + i2c-mux-idle-disconnect; + + imux56: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux57: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux58: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux59: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux60: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux61: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux62: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux63: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 8-0070 channel #2: connecting to top FCM + * (Fan Control Module). + */ imux26: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; + + i2c-switch@76 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux64: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux65: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux66: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux67: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux68: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux69: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux70: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux71: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 8-0070 channel #3: connecting to bottom + * FCM (Fan Control Module). + */ imux27: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; + + i2c-switch@76 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux72: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux73: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux74: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux75: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux76: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux77: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux78: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux79: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; imux28: i2c@4 { @@ -323,11 +725,16 @@ &i2c9 { status = "okay"; + /* + * I2C Switch 9-0070 is connecting to MAC/PHY EEPROMs on SMB + * (Switch Main Board). + */ i2c-switch@70 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + i2c-mux-idle-disconnect; imux32: i2c@0 { #address-cells = <1>; @@ -391,53 +798,534 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + i2c-mux-idle-disconnect; + /* + * I2C Switch 11-0070 channel #0: connecting to PIM + * (Port Interface Module) #1 (1-based). + */ imux40: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux80: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux81: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux82: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux83: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux84: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux85: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux86: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux87: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 11-0070 channel #1: connecting to PIM + * (Port Interface Module) #2 (1-based). + */ imux41: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux88: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux89: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux90: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux91: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux92: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux93: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux94: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux95: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 11-0070 channel #2: connecting to PIM + * (Port Interface Module) #3 (1-based). + */ imux42: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux96: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux97: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux98: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux99: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux100: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux101: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux102: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux103: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 11-0070 channel #3: connecting to PIM + * (Port Interface Module) #4 (1-based). + */ imux43: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux104: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux105: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux106: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux107: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux108: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux109: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux110: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux111: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 11-0070 channel #4: connecting to PIM + * (Port Interface Module) #5 (1-based). + */ imux44: i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux112: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux113: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux114: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux115: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux116: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux117: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux118: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux119: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 11-0070 channel #5: connecting to PIM + * (Port Interface Module) #6 (1-based). + */ imux45: i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux120: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux121: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux122: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux123: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux124: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux125: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux126: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux127: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 11-0070 channel #6: connecting to PIM + * (Port Interface Module) #7 (1-based). + */ imux46: i2c@6 { #address-cells = <1>; #size-cells = <0>; reg = <6>; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux128: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux129: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux130: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux131: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux132: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux133: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux134: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux135: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* + * I2C Switch 11-0070 channel #7: connecting to PIM + * (Port Interface Module) #8 (1-based). + */ imux47: i2c@7 { #address-cells = <1>; #size-cells = <0>; reg = <7>; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux136: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux137: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux138: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux139: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux140: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux141: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux142: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux143: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts index 2d44d9ad4e40..cd18641d5c23 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts @@ -82,11 +82,6 @@ status = "okay"; }; -&vuart { - // VUART Host Console - status = "okay"; -}; - &uart1 { // Host Console status = "okay"; @@ -196,6 +191,14 @@ use-ncsi; }; +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii2_default>; + use-ncsi; +}; + &adc { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts index 322587b7b67d..39c6be91d53f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts @@ -2,36 +2,16 @@ // Copyright (c) 2018 Facebook Inc. /dts-v1/; -#include "aspeed-g4.dtsi" +#include "ast2400-facebook-netbmc-common.dtsi" / { model = "Facebook Wedge 100 BMC"; compatible = "facebook,wedge100-bmc", "aspeed,ast2400"; - aliases { - /* - * Override the default uart aliases to avoid breaking - * the legacy applications. - */ - serial0 = &uart5; - serial1 = &uart1; - serial2 = &uart3; - serial3 = &uart4; - }; - chosen { stdout-path = &uart3; bootargs = "console=ttyS2,9600n8 root=/dev/ram rw"; }; - - memory@40000000 { - reg = <0x40000000 0x20000000>; - }; -}; - -&wdt1 { - status = "okay"; - aspeed,reset-type = "system"; }; &wdt2 { @@ -40,108 +20,38 @@ }; &fmc { - status = "okay"; - flash@0 { + flash@1 { status = "okay"; m25p,fast-read; - label = "fmc0"; -#include "facebook-bmc-flash-layout.dtsi" + label = "spi0.1"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + flash1@0 { + reg = <0x0 0x2000000>; + label = "flash1"; + }; + }; }; }; -&uart1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd1_default - &pinctrl_rxd1_default>; -}; - -&uart3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd3_default - &pinctrl_rxd3_default>; -}; - -&uart4 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd4_default - &pinctrl_rxd4_default>; -}; - -&uart5 { - status = "okay"; -}; - -&mac1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c3 { - status = "okay"; -}; - -&i2c4 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; - -&i2c6 { - status = "okay"; -}; - &i2c7 { - status = "okay"; - i2c-switch@70 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + i2c-mux-idle-disconnect; }; }; -&i2c8 { - status = "okay"; -}; - &i2c9 { status = "okay"; }; -&i2c10 { - status = "okay"; -}; - -&i2c11 { - status = "okay"; -}; - -&i2c12 { - status = "okay"; -}; - -&i2c13 { - status = "okay"; -}; &vhub { status = "okay"; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts index 8c426ba2f8ab..2dcfeae3c92a 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts @@ -2,137 +2,27 @@ // Copyright (c) 2018 Facebook Inc. /dts-v1/; -#include "aspeed-g4.dtsi" +#include "ast2400-facebook-netbmc-common.dtsi" / { model = "Facebook Wedge 40 BMC"; compatible = "facebook,wedge40-bmc", "aspeed,ast2400"; - aliases { - /* - * Override the default uart aliases to avoid breaking - * the legacy applications. - */ - serial0 = &uart5; - serial1 = &uart1; - serial2 = &uart3; - serial3 = &uart4; - }; - chosen { stdout-path = &uart3; bootargs = "console=ttyS2,9600n8 root=/dev/ram rw"; }; - memory@40000000 { - reg = <0x40000000 0x20000000>; - }; - ast-adc-hwmon { compatible = "iio-hwmon"; io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>; }; }; -&wdt1 { - status = "okay"; - aspeed,reset-type = "system"; -}; - &wdt2 { status = "disabled"; }; -&fmc { - status = "okay"; - flash@0 { - status = "okay"; - m25p,fast-read; - label = "spi0.0"; -#include "facebook-bmc-flash-layout.dtsi" - }; -}; - -&uart1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd1_default - &pinctrl_rxd1_default>; -}; - -&uart3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd3_default - &pinctrl_rxd3_default>; -}; - -&uart4 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd4_default - &pinctrl_rxd4_default - &pinctrl_ndts4_default>; -}; - -&uart5 { - status = "okay"; -}; - -&mac1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c3 { - status = "okay"; -}; - -&i2c4 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; - -&i2c6 { - status = "okay"; -}; - -&i2c7 { - status = "okay"; -}; - -&i2c8 { - status = "okay"; -}; - -&i2c11 { - status = "okay"; -}; - -&i2c12 { - status = "okay"; -}; - -&vhub { - status = "okay"; -}; - &adc { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts index ad1fcad3676c..63a3dd548f30 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts @@ -124,8 +124,8 @@ * "data0" partition (4MB) is reserved for persistent * data store. */ - data0@3800000 { - reg = <0x7c00000 0x800000>; + data0@7c00000 { + reg = <0x7c00000 0x400000>; label = "data0"; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts new file mode 100644 index 000000000000..291f7d6c9979 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2020 IBM Corp. +/dts-v1/; + +#include "aspeed-bmc-ibm-rainier.dts" + +/ { + model = "Rainier 4U"; +}; + +&i2c3 { + power-supply@6a { + compatible = "ibm,cffps"; + reg = <0x6a>; + }; + + power-supply@6b { + compatible = "ibm,cffps"; + reg = <0x6b>; + }; +}; + +&fan0 { + tach-pulses = <4>; +}; + +&fan1 { + tach-pulses = <4>; +}; + +&fan2 { + tach-pulses = <4>; +}; + +&fan3 { + tach-pulses = <4>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index 21ae880c7530..a4b77aec5424 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -8,7 +8,7 @@ #include <dt-bindings/leds/leds-pca955x.h> / { - model = "Rainier"; + model = "Rainier 2U"; compatible = "ibm,rainier-bmc", "aspeed,ast2600"; aliases { @@ -47,9 +47,18 @@ #size-cells = <1>; ranges; - flash_memory: region@B8000000 { + flash_memory: region@b8000000 { no-map; - reg = <0xB8000000 0x04000000>; /* 64M */ + reg = <0xb8000000 0x04000000>; /* 64M */ + }; + + ramoops@bc000000 { + compatible = "ramoops"; + reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; /* KMSG_DUMP_EMERG */ }; vga_memory: region@bf000000 { @@ -258,6 +267,7 @@ cfam0_spi2: spi@40 { reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; #address-cells = <1>; #size-cells = <0>; @@ -274,6 +284,7 @@ cfam0_spi3: spi@60 { reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; #address-cells = <1>; #size-cells = <0>; @@ -370,6 +381,7 @@ cfam1_spi2: spi@40 { reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; #address-cells = <1>; #size-cells = <0>; @@ -386,6 +398,7 @@ cfam1_spi3: spi@60 { reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; #address-cells = <1>; #size-cells = <0>; @@ -480,6 +493,7 @@ cfam2_spi2: spi@40 { reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; #address-cells = <1>; #size-cells = <0>; @@ -496,6 +510,7 @@ cfam2_spi3: spi@60 { reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; #address-cells = <1>; #size-cells = <0>; @@ -594,16 +609,6 @@ compatible = "ibm,cffps"; reg = <0x69>; }; - - power-supply@6a { - compatible = "ibm,cffps"; - reg = <0x6a>; - }; - - power-supply@6b { - compatible = "ibm,cffps"; - reg = <0x6b>; - }; }; &i2c4 { @@ -723,25 +728,25 @@ #address-cells = <1>; #size-cells = <0>; - fan@0 { + fan0: fan@0 { compatible = "pmbus-fan"; reg = <0>; tach-pulses = <2>; }; - fan@1 { + fan1: fan@1 { compatible = "pmbus-fan"; reg = <1>; tach-pulses = <2>; }; - fan@2 { + fan2: fan@2 { compatible = "pmbus-fan"; reg = <2>; tach-pulses = <2>; }; - fan@3 { + fan3: fan@3 { compatible = "pmbus-fan"; reg = <3>; tach-pulses = <2>; diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts index 1deb30ec912c..6e9baf3bba53 100644 --- a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts +++ b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts @@ -22,9 +22,9 @@ #size-cells = <1>; ranges; - vga_memory: framebuffer@7f000000 { + vga_memory: framebuffer@9f000000 { no-map; - reg = <0x7f000000 0x01000000>; + reg = <0x9f000000 0x01000000>; /* 16M */ }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts index 4d070d6ba09f..c1478d2db602 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts @@ -26,11 +26,20 @@ #size-cells = <1>; ranges; - flash_memory: region@ba000000 { + flash_memory: region@b8000000 { no-map; reg = <0xb8000000 0x4000000>; /* 64M */ }; + ramoops@bc000000 { + compatible = "ramoops"; + reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; /* KMSG_DUMP_EMERG */ + }; + vga_memory: region@bf000000 { no-map; compatible = "shared-dma-pool"; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 82f0213e3a3c..b3dafbc8caca 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -192,6 +192,11 @@ status = "disabled"; }; + silicon-id@7c { + compatible = "aspeed,ast2400-silicon-id", "aspeed,silicon-id"; + reg = <0x7c 0x4>; + }; + pinctrl: pinctrl@80 { reg = <0x80 0x18>, <0xa0 0x10>; compatible = "aspeed,ast2400-pinctrl"; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index a93009aa2f04..5bc0de0f3365 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -239,6 +239,11 @@ status = "disabled"; }; + silicon-id@7c { + compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id"; + reg = <0x7c 0x4 0x150 0x8>; + }; + pinctrl: pinctrl@80 { compatible = "aspeed,ast2500-pinctrl"; reg = <0x80 0x18>, <0xa0 0x10>; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index b58220a49cbd..810b0676ab03 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -69,6 +69,12 @@ always-on; }; + edac: sdram@1e6e0000 { + compatible = "aspeed,ast2600-sdram-edac", "syscon"; + reg = <0x1e6e0000 0x174>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -311,6 +317,11 @@ compatible = "aspeed,ast2600-pinctrl"; }; + silicon-id@14 { + compatible = "aspeed,ast2600-silicon-id", "aspeed,silicon-id"; + reg = <0x14 0x4 0x5b0 0x8>; + }; + smp-memram@180 { compatible = "aspeed,ast2600-smpmem"; reg = <0x180 0x40>; @@ -357,7 +368,7 @@ #gpio-cells = <2>; gpio-controller; compatible = "aspeed,ast2600-gpio"; - reg = <0x1e780000 0x800>; + reg = <0x1e780000 0x400>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; gpio-ranges = <&pinctrl 0 0 208>; ngpios = <208>; diff --git a/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi new file mode 100644 index 000000000000..73a5503be78c --- /dev/null +++ b/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2020 Facebook Inc. +/dts-v1/; + +#include "aspeed-g4.dtsi" + +/ { + aliases { + /* + * Override the default uart aliases to avoid breaking + * the legacy applications. + */ + serial0 = &uart5; + serial1 = &uart1; + serial2 = &uart3; + serial3 = &uart4; + }; + + memory@40000000 { + reg = <0x40000000 0x20000000>; + }; +}; + +&wdt1 { + status = "okay"; + aspeed,reset-type = "system"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "spi0.0"; +#include "facebook-bmc-flash-layout.dtsi" + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default + &pinctrl_rxd4_default + &pinctrl_ndts4_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index 7add151f6250..3b8812fcd854 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -48,48 +48,37 @@ }; }; - pwm_leds { + led-controller { compatible = "pwm-leds"; - network_green { + led-1 { label = "pwm:green:network"; - pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>; + pwms = <&tcb1_pwm1 0 10000000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "default-on"; }; - network_red { + led-2 { label = "pwm:red:network"; - pwms = <&tcb_pwm 4 10000000 PWM_POLARITY_INVERTED>; + pwms = <&tcb1_pwm2 0 10000000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "default-on"; }; - user_green { + led-3 { label = "pwm:green:user"; - pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>; + pwms = <&tcb1_pwm0 0 10000000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "default-on"; }; - user_red { + led-4 { label = "pwm:red:user"; - pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>; + pwms = <&tcb1_pwm0 1 10000000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "default-on"; }; }; - - tcb_pwm: pwm { - compatible = "atmel,tcb-pwm"; - #pwm-cells = <3>; - tc-block = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tcb1_tioa0 - &pinctrl_tcb1_tioa1 - &pinctrl_tcb1_tioa2 - &pinctrl_tcb1_tiob0>; - }; }; &tcb0 { @@ -104,6 +93,32 @@ }; }; +&tcb1 { + tcb1_pwm0: pwm@0 { + compatible = "atmel,tcb-pwm"; + reg = <0>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tcb1_tioa0 &pinctrl_tcb1_tiob0>; + }; + + tcb1_pwm1: pwm@1 { + compatible = "atmel,tcb-pwm"; + reg = <1>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tcb1_tioa1>; + }; + + tcb1_pwm2: pwm@2 { + compatible = "atmel,tcb-pwm"; + reg = <2>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tcb1_tioa2>; + }; +}; + &ebi { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi index 25f761065106..c08834ddf07b 100644 --- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi +++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi @@ -58,24 +58,24 @@ }; }; - pwm_leds { + led-controller { compatible = "pwm-leds"; - blue { + led-1 { label = "pwm:blue:user"; pwms = <&pwm0 2 10000000 0>; max-brightness = <255>; linux,default-trigger = "none"; }; - green { + led-2 { label = "pwm:green:user"; pwms = <&pwm0 1 10000000 0>; max-brightness = <255>; linux,default-trigger = "default-on"; }; - red { + led-3 { label = "pwm:red:user"; pwms = <&pwm0 0 10000000 0>; max-brightness = <255>; diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts index 0da1f0557eaf..2799b2a1f4d2 100644 --- a/arch/arm/boot/dts/at91-kizbox3-hs.dts +++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts @@ -15,40 +15,40 @@ model = "Overkiz KIZBOX3-HS"; compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5"; - pwm_leds { + led-controller-1 { status = "okay"; - red { + led-1 { status = "okay"; }; - green { + led-2 { status = "okay"; }; - blue { + led-3 { status = "okay"; }; - white { + led-4 { status = "okay"; }; }; - leds { + led-controller-2 { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_led_red &pinctrl_led_white>; status = "okay"; - red { + led-5 { label = "pio:red:user"; gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - white { + led-6 { label = "pio:white:user"; gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>; default-state = "off"; diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi index 7c3076e245ef..9ce513dd514b 100644 --- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi +++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi @@ -62,7 +62,7 @@ regulator-always-on; }; - pwm_leds { + led-controller-1 { compatible = "pwm-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0_pwm_h0 @@ -71,7 +71,7 @@ &pinctrl_pwm0_pwm_h3>; status = "disabled"; - red { + led-1 { label = "pwm:red:user"; pwms = <&pwm0 0 10000000 0>; max-brightness = <255>; @@ -79,7 +79,7 @@ status = "disabled"; }; - green { + led-2 { label = "pwm:green:user"; pwms = <&pwm0 1 10000000 0>; max-brightness = <255>; @@ -87,14 +87,14 @@ status = "disabled"; }; - blue { + led-3 { label = "pwm:blue:user"; pwms = <&pwm0 2 10000000 0>; max-brightness = <255>; status = "disabled"; }; - white { + led-4 { label = "pwm:white:user"; pwms = <&pwm0 3 10000000 0>; max-brightness = <255>; diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi index d37724c10695..9c622892c692 100644 --- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi +++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi @@ -54,10 +54,10 @@ }; }; - leds: pwm_leds { + leds: led-controller-1 { compatible = "pwm-leds"; - led_blue: pwm_blue { + led_blue: led-1 { label = "pwm:blue:user"; pwms = <&pwm0 2 10000000 0>; max-brightness = <255>; @@ -65,14 +65,14 @@ status = "disabled"; }; - led_green: pwm_green { + led_green: led-2 { label = "pwm:green:user"; pwms = <&pwm0 0 10000000 0>; max-brightness = <255>; linux,default-trigger = "default-on"; }; - led_red: pwm_red { + led_red: led-3 { label = "pwm:red:user"; pwms = <&pwm0 1 10000000 0>; max-brightness = <255>; diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index eae28b82c7fd..73b6b1f89de9 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -569,11 +569,14 @@ atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; }; }; -}; /* pinctrl */ -&pmc { - atmel,osc-bypass; -}; + usb1 { + pinctrl_usb_default: usb_default { + atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; +}; /* pinctrl */ &pwm0 { pinctrl-names = "default"; @@ -684,6 +687,8 @@ atmel,vbus-gpio = <0 &pioD 15 GPIO_ACTIVE_HIGH &pioD 16 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index b1f994c0ae79..1b1163858b1d 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -100,7 +100,7 @@ status = "okay"; at24@50 { - compatible = "24c02"; + compatible = "atmel,24c02"; reg = <0x50>; pagesize = <8>; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index cf13632edd44..5179258f9247 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -242,6 +242,11 @@ atmel,pins = <AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */ }; + pinctrl_usb_default: usb_default { + atmel,pins = + <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; }; }; @@ -259,6 +264,8 @@ &pioE 3 GPIO_ACTIVE_LOW &pioE 4 GPIO_ACTIVE_LOW >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index e5974a17374c..0b3ad1b580b8 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -134,6 +134,11 @@ atmel,pins = <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; }; + pinctrl_usb_default: usb_default { + atmel,pins = + <AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; pinctrl_key_gpio: key_gpio_0 { atmel,pins = <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; @@ -159,6 +164,8 @@ &pioE 11 GPIO_ACTIVE_HIGH &pioE 14 GPIO_ACTIVE_HIGH >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-smartkiz.dts b/arch/arm/boot/dts/at91-smartkiz.dts index 106f23ba4a3b..b76a6b5ac464 100644 --- a/arch/arm/boot/dts/at91-smartkiz.dts +++ b/arch/arm/boot/dts/at91-smartkiz.dts @@ -84,10 +84,8 @@ status = "okay"; }; -&leds { - blue { - status = "okay"; - }; +&led_blue { + status = "okay"; }; &adc0 { diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 82c5d7fd9811..019f1c3d4d30 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -697,8 +697,6 @@ }; adc0: adc@fffe0000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>; @@ -708,29 +706,6 @@ atmel,adc-channels-used = <0xf>; atmel,adc-vref = <3300>; atmel,adc-startup-time = <15>; - atmel,adc-res = <8 10>; - atmel,adc-res-names = "lowres", "highres"; - atmel,adc-use-res = "highres"; - - trigger0 { - trigger-name = "timer-counter-0"; - trigger-value = <0x1>; - }; - trigger1 { - trigger-name = "timer-counter-1"; - trigger-value = <0x3>; - }; - - trigger2 { - trigger-name = "timer-counter-2"; - trigger-value = <0x5>; - }; - - trigger3 { - trigger-name = "external"; - trigger-value = <0xd>; - trigger-external; - }; }; rtc@fffffd20 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 19fc748a87c5..2ab730fd6472 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -812,8 +812,6 @@ }; adc0: adc@fffb0000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "atmel,at91sam9g45-adc"; reg = <0xfffb0000 0x100>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; @@ -822,31 +820,6 @@ atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; atmel,adc-startup-time = <40>; - atmel,adc-res = <8 10>; - atmel,adc-res-names = "lowres", "highres"; - atmel,adc-use-res = "highres"; - - trigger0 { - trigger-name = "external-rising"; - trigger-value = <0x1>; - trigger-external; - }; - trigger1 { - trigger-name = "external-falling"; - trigger-value = <0x2>; - trigger-external; - }; - - trigger2 { - trigger-name = "external-any"; - trigger-value = <0x3>; - trigger-external; - }; - - trigger3 { - trigger-name = "continuous"; - trigger-value = <0x6>; - }; }; isi@fffb4000 { diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 9734667abbfc..b6256a20fbc7 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -315,27 +315,27 @@ }; }; - leds { + led-controller-1 { compatible = "gpio-leds"; - d8 { + led-1 { label = "d8"; gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; - pwmleds { + led-controller-2 { compatible = "pwm-leds"; - d6 { + led-2 { label = "d6"; pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "nand-disk"; }; - d7 { + led-3 { label = "d7"; pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; max-brightness = <255>; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 5653e70c84b4..730d1182c73e 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -266,8 +266,6 @@ }; adc0: adc@fffd0000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "atmel,at91sam9rl-adc"; reg = <0xfffd0000 0x100>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; @@ -277,29 +275,6 @@ atmel,adc-channels-used = <0x3f>; atmel,adc-vref = <3300>; atmel,adc-startup-time = <40>; - atmel,adc-res = <8 10>; - atmel,adc-res-names = "lowres", "highres"; - atmel,adc-use-res = "highres"; - - trigger0 { - trigger-name = "timer-counter-0"; - trigger-value = <0x1>; - }; - trigger1 { - trigger-name = "timer-counter-1"; - trigger-value = <0x3>; - }; - - trigger2 { - trigger-name = "timer-counter-2"; - trigger-value = <0x5>; - }; - - trigger3 { - trigger-name = "external"; - trigger-value = <0x13>; - trigger-external; - }; }; usb0: gadget@fffd4000 { diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 1590862f16f2..62981b39c815 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -218,26 +218,26 @@ }; }; - pwmleds { + led-controller-1 { compatible = "pwm-leds"; - ds1 { + led-1 { label = "ds1"; pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; max-brightness = <255>; }; - ds2 { + led-2 { label = "ds2"; pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>; max-brightness = <255>; }; }; - leds { + led-controller-2 { compatible = "gpio-leds"; - ds3 { + led-3 { label = "ds3"; gpios = <&pioD 14 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 4cdb05079cc7..395e883644cd 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -795,8 +795,6 @@ }; adc0: adc@f804c000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "atmel,at91sam9x5-adc"; reg = <0xf804c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; @@ -808,32 +806,6 @@ atmel,adc-vref = <3300>; atmel,adc-startup-time = <40>; atmel,adc-sample-hold-time = <11>; - atmel,adc-res = <8 10>; - atmel,adc-res-names = "lowres", "highres"; - atmel,adc-use-res = "highres"; - - trigger0 { - trigger-name = "external-rising"; - trigger-value = <0x1>; - trigger-external; - }; - - trigger1 { - trigger-name = "external-falling"; - trigger-value = <0x2>; - trigger-external; - }; - - trigger2 { - trigger-name = "external-any"; - trigger-value = <0x3>; - trigger-external; - }; - - trigger3 { - trigger-name = "continuous"; - trigger-value = <0x6>; - }; }; spi0: spi@f0000000 { diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index dacaef2c14ca..0025c88f660c 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -591,7 +591,6 @@ adc: adc@180a6000 { compatible = "brcm,iproc-static-adc"; #io-channel-cells = <1>; - io-channel-ranges; adc-syscon = <&ts_adc_syscon>; clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; clock-names = "tsc_clk"; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index e895f7cb8c9f..b4d2cc70afb1 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -385,12 +385,12 @@ clock-names = "apb_pclk"; }; - srab: srab@36000 { + srab: ethernet-switch@36000 { compatible = "brcm,nsp-srab"; reg = <0x36000 0x1000>, <0x3f308 0x8>, <0x3f410 0xc>; - reg-names = "srab", "mux_config", "sgmii"; + reg-names = "srab", "mux_config", "sgmii_config"; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, @@ -420,6 +420,10 @@ status = "disabled"; /* ports are defined in board DTS */ + ports { + #address-cells = <1>; + #size-cells = <0>; + }; }; i2c0: i2c@38000 { diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index 09a1182c2936..403bacf986eb 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -181,12 +181,14 @@ &hdmi0 { clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>; clock-names = "hdmi", "bvb", "audio", "cec"; + wifi-2.4ghz-coexistence; status = "okay"; }; &hdmi1 { clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; clock-names = "hdmi", "bvb", "audio", "cec"; + wifi-2.4ghz-coexistence; status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi index e2fd9610e125..20322de2f8bf 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 &usb { dr_mode = "otg"; - g-rx-fifo-size = <256>; + g-rx-fifo-size = <558>; g-np-tx-fifo-size = <32>; /* * According to dwc2 the sum of all device EP diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi index 0ff0e9e25327..1409d1b559c1 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 &usb { dr_mode = "peripheral"; - g-rx-fifo-size = <256>; + g-rx-fifo-size = <558>; g-np-tx-fifo-size = <32>; g-tx-fifo-size = <256 256 512 512 512 768 768>; }; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts index 810fc32f1895..5b4a481be4f4 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts @@ -57,17 +57,10 @@ status = "okay"; }; -&usb3_phy { - status = "okay"; -}; - &srab { status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "poe"; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index 7604b4480bb1..8636600385fd 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -64,17 +64,10 @@ status = "okay"; }; -&usb3_phy { - status = "okay"; -}; - &srab { status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@4 { reg = <4>; label = "lan"; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index abd35a518046..51c64f0b2560 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -122,9 +122,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "lan4"; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index 4dcec6865469..2f2d2b0a6893 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -117,7 +117,3 @@ }; }; }; - -&usb3_phy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts index 1ec655809e57..68aaf0af3945 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts @@ -57,17 +57,10 @@ status = "okay"; }; -&usb3_phy { - status = "okay"; -}; - &srab { status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@4 { reg = <4>; label = "poe"; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts index 04bfd58127fc..432254383769 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -105,17 +105,10 @@ status = "okay"; }; -&usb3_phy { - status = "okay"; -}; - &srab { status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "lan4"; diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts index 01c390ed48ea..12e34a0439b4 100644 --- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts @@ -126,7 +126,3 @@ &usb2 { vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; }; - -&usb3_phy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi index e1bb8661955f..cba3d910bed8 100644 --- a/arch/arm/boot/dts/bcm4709.dtsi +++ b/arch/arm/boot/dts/bcm4709.dtsi @@ -9,3 +9,7 @@ clock-frequency = <125000000>; status = "okay"; }; + +&srab { + compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; +}; diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts index 0faae8950375..3725f2b0d60b 100644 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -123,33 +123,13 @@ }; }; - mdio-bus-mux { - #address-cells = <1>; - #size-cells = <0>; + mdio-bus-mux@18003000 { /* BIT(9) = 1 => external mdio */ - mdio_ext: mdio@200 { + mdio@200 { reg = <0x200>; #address-cells = <1>; #size-cells = <0>; - }; - }; - - mdio-mii-mux { - compatible = "mdio-mux-mmioreg"; - mdio-parent-bus = <&mdio_ext>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x1800c1c0 0x4>; - - /* BIT(6) = mdc, BIT(7) = mdio */ - mux-mask = <0xc0>; - - mdio-mii@0 { - /* Enable MII function */ - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; switch@0 { compatible = "brcm,bcm53125"; @@ -159,6 +139,8 @@ reset-names = "robo_reset"; reg = <0>; dsa,member = <1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_mdio>; ports { #address-cells = <1>; @@ -219,9 +201,6 @@ dsa,member = <0 0>; ports { - #address-cells = <1>; - #size-cells = <0>; - port@1 { reg = <1>; label = "lan7"; @@ -242,6 +221,30 @@ label = "wan"; }; + port@5 { + reg = <5>; + ethernet = <&gmac0>; + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@7 { + reg = <7>; + ethernet = <&gmac1>; + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + port@8 { reg = <8>; ethernet = <&gmac2>; @@ -268,3 +271,44 @@ &usb3_phy { status = "okay"; }; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x0000000 0x0080000>; + read-only; + }; + + partition@80000 { + label = "nvram"; + reg = <0x080000 0x0100000>; + }; + + partition@180000{ + label = "devinfo"; + reg = <0x0180000 0x080000>; + }; + + partition@200000 { + label = "firmware"; + reg = <0x0200000 0x01D00000>; + compatible = "brcm,trx"; + }; + + partition@1F00000 { + label = "failsafe"; + reg = <0x01F00000 0x01D00000>; + read-only; + }; + + partition@5200000 { + label = "system"; + reg = <0x05200000 0x02E00000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts index 068e384b8ab7..6fa101f0a90d 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts @@ -59,9 +59,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "poe"; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts index 9ae815ddbb4b..4f8d777ae18d 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts @@ -57,9 +57,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "lan"; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index a21b2d185596..e17e9a17fb00 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -108,9 +108,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "lan4"; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts index 4d5c5aa7dc42..60cc87ecc7ec 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts @@ -71,6 +71,10 @@ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; }; +&usb3_phy { + status = "okay"; +}; + &spi_nor { status = "okay"; }; @@ -79,9 +83,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "lan4"; diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi index cdc5ff593adb..2a8f7312d1be 100644 --- a/arch/arm/boot/dts/bcm47094.dtsi +++ b/arch/arm/boot/dts/bcm47094.dtsi @@ -8,6 +8,15 @@ / { }; +&pinctrl { + compatible = "brcm,bcm4709-pinmux"; + + pinmux_mdio: mdio { + groups = "mdio_grp"; + function = "mdio"; + }; +}; + &usb3_phy { compatible = "brcm,ns-bx-usb3-phy"; }; @@ -16,3 +25,7 @@ clock-frequency = <125000000>; status = "okay"; }; + +&srab { + compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index ac3a99cf2079..7db72a2f1020 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -265,7 +265,7 @@ interrupt-parent = <&gic>; - ehci: ehci@21000 { + ehci: usb@21000 { #usb-cells = <0>; compatible = "generic-ehci"; @@ -287,7 +287,7 @@ }; }; - ohci: ohci@22000 { + ohci: usb@22000 { #usb-cells = <0>; compatible = "generic-ohci"; @@ -318,7 +318,7 @@ interrupt-parent = <&gic>; - xhci: xhci@23000 { + xhci: usb@23000 { #usb-cells = <0>; compatible = "generic-xhci"; @@ -428,7 +428,27 @@ #address-cells = <1>; #size-cells = <1>; - pin-controller@1c0 { + lcpll0: lcpll0@100 { + #clock-cells = <1>; + compatible = "brcm,nsp-lcpll0"; + reg = <0x100 0x14>; + clocks = <&osc>; + clock-output-names = "lcpll0", "pcie_phy", + "sdio", "ddr_phy"; + }; + + genpll: genpll@140 { + #clock-cells = <1>; + compatible = "brcm,nsp-genpll"; + reg = <0x140 0x24>; + clocks = <&osc>; + clock-output-names = "genpll", "phy", + "ethernetclk", + "usbclk", "iprocfast", + "sata1", "sata2"; + }; + + pinctrl: pin-controller@1c0 { compatible = "brcm,bcm4708-pinmux"; reg = <0x1c0 0x24>; reg-names = "cru_gpio_control"; @@ -454,41 +474,26 @@ function = "uart1"; }; }; - }; - }; - - lcpll0: lcpll0@1800c100 { - #clock-cells = <1>; - compatible = "brcm,nsp-lcpll0"; - reg = <0x1800c100 0x14>; - clocks = <&osc>; - clock-output-names = "lcpll0", "pcie_phy", "sdio", - "ddr_phy"; - }; - genpll: genpll@1800c140 { - #clock-cells = <1>; - compatible = "brcm,nsp-genpll"; - reg = <0x1800c140 0x24>; - clocks = <&osc>; - clock-output-names = "genpll", "phy", "ethernetclk", - "usbclk", "iprocfast", "sata1", - "sata2"; - }; - - thermal: thermal@1800c2c0 { - compatible = "brcm,ns-thermal"; - reg = <0x1800c2c0 0x10>; - #thermal-sensor-cells = <0>; + thermal: thermal@2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + }; }; - srab: srab@18007000 { - compatible = "brcm,bcm5301x-srab"; + srab: ethernet-switch@18007000 { + compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab"; reg = <0x18007000 0x1000>; status = "disabled"; /* ports are defined in board DTS */ + ports { + #address-cells = <1>; + #size-cells = <0>; + }; }; rng: rng@18004000 { diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index 4af8e3293cff..51546fccc616 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -135,7 +135,7 @@ #address-cells = <1>; #size-cells = <1>; - ehci: ehci@4000 { + ehci: usb@4000 { compatible = "generic-ehci"; reg = <0x4000 0x1000>; interrupt-parent = <&gic>; @@ -155,7 +155,7 @@ }; }; - ohci: ohci@d000 { + ohci: usb@d000 { #usb-cells = <0>; compatible = "generic-ohci"; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts index 957468224622..52feca0fb906 100644 --- a/arch/arm/boot/dts/bcm953012er.dts +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -69,9 +69,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "port0"; diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index 7be4c4e628e0..5443fc079e6e 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -178,3 +178,7 @@ &xhci { status = "okay"; }; + +&srab { + compatible = "brcm,bcm58522-srab", "brcm,nsp-srab"; +}; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index e58ed7e95346..e1e3c26cef19 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -190,3 +190,7 @@ &xhci { status = "okay"; }; + +&srab { + compatible = "brcm,bcm58525-srab", "brcm,nsp-srab"; +}; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index 21f922dc6019..f161ba2e7e5e 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -210,3 +210,7 @@ &xhci { status = "okay"; }; + +&srab { + compatible = "brcm,bcm58525-srab", "brcm,nsp-srab"; +}; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index a49c2fd21f4a..83cb877d63db 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -176,9 +176,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { label = "port0"; reg = <0>; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index dd6dff6452b8..4e106ce1384a 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -180,9 +180,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { label = "port0"; reg = <0>; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index a71371b4065e..cda6cc281e18 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -195,9 +195,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { label = "port0"; reg = <0>; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 7782b61c51a1..ffbff0014c65 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -216,9 +216,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { label = "port0"; reg = <0>; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index edd0f630e025..3fd39c479a3c 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -184,9 +184,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { label = "port0"; reg = <0>; diff --git a/arch/arm/boot/dts/dove-sbc-a510.dts b/arch/arm/boot/dts/dove-sbc-a510.dts index 2bb85a9b7614..df021f9b0117 100644 --- a/arch/arm/boot/dts/dove-sbc-a510.dts +++ b/arch/arm/boot/dts/dove-sbc-a510.dts @@ -143,6 +143,7 @@ gpio_ext: gpio@20 { compatible = "nxp,pca9555"; reg = <0x20>; + gpio-controller; #gpio-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 4e1bbc0198eb..ce1194744f84 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -724,22 +724,40 @@ /* OCP2SCP1 */ /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */ - gpmc: gpmc@50000000 { - compatible = "ti,am3352-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x50000000 0x37c>; /* device IO registers */ - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&edma_xbar 4 0>; - dma-names = "rxtx"; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <2>; - #address-cells = <2>; + + target-module@50000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x50000000 4>, + <0x50000010 4>, + <0x50000014 4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + clocks = <&l3main1_clkctrl DRA7_L3MAIN1_GPMC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; #size-cells = <1>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - status = "disabled"; + ranges = <0x50000000 0x50000000 0x00001000>, /* regs */ + <0x00000000 0x00000000 0x40000000>; /* data */ + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + reg = <0x50000000 0x37c>; /* device IO registers */ + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma_xbar 4 0>; + dma-names = "rxtx"; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; }; target-module@56000000 { @@ -932,7 +950,7 @@ }; }; - sham_target: target-module@4b101000 { + sham1_target: target-module@4b101000 { compatible = "ti,sysc-omap3-sham", "ti,sysc"; reg = <0x4b101100 0x4>, <0x4b101110 0x4>, @@ -951,7 +969,7 @@ #size-cells = <1>; ranges = <0x0 0x4b101000 0x1000>; - sham: sham@0 { + sham1: sham@0 { compatible = "ti,omap5-sham"; reg = <0 0x300>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; @@ -962,6 +980,62 @@ }; }; + sham2_target: target-module@42701000 { + compatible = "ti,sysc-omap3-sham", "ti,sysc"; + reg = <0x42701100 0x4>, + <0x42701110 0x4>, + <0x42701114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x42701000 0x1000>; + + sham2: sham@0 { + compatible = "ti,omap5-sham"; + reg = <0 0x300>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma_xbar 165 0>; + dma-names = "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + }; + + iva_hd_target: target-module@5a000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5a05a400 0x4>, + <0x5a05a410 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + power-domains = <&prm_iva>; + resets = <&prm_iva 2>; + reset-names = "rstctrl"; + clocks = <&iva_clkctrl DRA7_IVA_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5a000000 0x5a000000 0x1000000>, + <0x5b000000 0x5b000000 0x1000000>; + + iva { + compatible = "ti,ivahd"; + }; + }; + opp_supply_mpu: opp-supply@4a003b20 { compatible = "ti,omap5-opp-supply"; reg = <0x4a003b20 0xc>; @@ -1031,53 +1105,130 @@ #include "dra7xx-clocks.dtsi" &prm { + prm_mpu: prm@300 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x300 0x100>; + #power-domain-cells = <0>; + }; + prm_dsp1: prm@400 { compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; reg = <0x400 0x100>; #reset-cells = <1>; + #power-domain-cells = <0>; }; prm_ipu: prm@500 { compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; reg = <0x500 0x100>; #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + prm_coreaon: prm@628 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x628 0xd8>; + #power-domain-cells = <0>; }; prm_core: prm@700 { compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; reg = <0x700 0x100>; #reset-cells = <1>; + #power-domain-cells = <0>; }; prm_iva: prm@f00 { compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; reg = <0xf00 0x100>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + prm_cam: prm@1000 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1000 0x100>; + #power-domain-cells = <0>; + }; + + prm_dss: prm@1100 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1100 0x100>; + #power-domain-cells = <0>; + }; + + prm_gpu: prm@1200 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1200 0x100>; + #power-domain-cells = <0>; + }; + + prm_l3init: prm@1300 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1300 0x100>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + prm_l4per: prm@1400 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1400 0x100>; + #power-domain-cells = <0>; + }; + + prm_custefuse: prm@1600 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1600 0x100>; + #power-domain-cells = <0>; + }; + + prm_wkupaon: prm@1724 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1724 0x100>; + #power-domain-cells = <0>; }; prm_dsp2: prm@1b00 { compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; reg = <0x1b00 0x40>; #reset-cells = <1>; + #power-domain-cells = <0>; }; prm_eve1: prm@1b40 { compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; reg = <0x1b40 0x40>; + #power-domain-cells = <0>; }; prm_eve2: prm@1b80 { compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; reg = <0x1b80 0x40>; + #power-domain-cells = <0>; }; prm_eve3: prm@1bc0 { compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; reg = <0x1bc0 0x40>; + #power-domain-cells = <0>; }; prm_eve4: prm@1c00 { compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; reg = <0x1c00 0x60>; + #power-domain-cells = <0>; + }; + + prm_rtc: prm@1c60 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1c60 0x20>; + #power-domain-cells = <0>; + }; + + prm_vpe: prm@1c80 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1c80 0x80>; + #power-domain-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi index b69c7d40f5d8..2f326151116b 100644 --- a/arch/arm/boot/dts/dra76x.dtsi +++ b/arch/arm/boot/dts/dra76x.dtsi @@ -32,8 +32,8 @@ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "int0", "int1"; - clocks = <&mcan_clk>, <&l3_iclk_div>; - clock-names = "cclk", "hclk"; + clocks = <&l3_iclk_div>, <&mcan_clk>; + clock-names = "hclk", "cclk"; bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>; }; }; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index dc0a93bccbf1..2365554eef3c 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1726,6 +1726,20 @@ }; }; + iva_cm: iva-cm@f00 { + compatible = "ti,omap4-cm"; + reg = <0xf00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xf00 0x100>; + + iva_clkctrl: iva-clkctrl@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0xc>; + #clock-cells = <2>; + }; + }; + cam_cm: cam-cm@1000 { compatible = "ti,omap4-cm"; reg = <0x1000 0x100>; diff --git a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi index 1dbf3bbff8d3..597ade3e252f 100644 --- a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi +++ b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi @@ -11,14 +11,14 @@ #size-cells = <1>; ranges; - mfc_left: region_mfc_left { + mfc_left: region-mfc-left { compatible = "shared-dma-pool"; no-map; size = <0x2400000>; alignment = <0x100000>; }; - mfc_right: region_mfc_right { + mfc_right: region-mfc-right { compatible = "shared-dma-pool"; no-map; size = <0x800000>; diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts index 20446a846a98..a1e22f630638 100644 --- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts +++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts @@ -37,3 +37,29 @@ &serial_2 { status = "okay"; }; + +&spi_0 { + status = "okay"; + cs-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>, <0>; + + assigned-clocks = <&cmu CLK_MOUT_SPI0>, <&cmu CLK_DIV_SPI0>, + <&cmu CLK_DIV_SPI0_PRE>, <&cmu CLK_SCLK_SPI0>; + assigned-clock-parents = <&cmu CLK_DIV_MPLL_PRE>, /* for: CLK_MOUT_SPI0 */ + <&cmu CLK_MOUT_SPI0>, /* for: CLK_DIV_SPI0 */ + <&cmu CLK_DIV_SPI0>, /* for: CLK_DIV_SPI0_PRE */ + <&cmu CLK_DIV_SPI0_PRE>; /* for: CLK_SCLK_SPI0 */ + + ethernet@0 { + compatible = "asix,ax88796c"; + reg = <0x0>; + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a boot-loader */ + interrupt-parent = <&gpx2>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <40000000>; + reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>; + + controller-data { + samsung,spi-feedback-delay = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 12887b3924af..04290ec4583a 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -76,7 +76,7 @@ samsung,i2c-max-bus-freq = <100000>; status = "okay"; - s2mps14_pmic@66 { + pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx3>; interrupts = <5 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index c1a68e612037..69451566945d 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -34,10 +34,10 @@ reg = <0x0205F000 0x1000>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - power_key { + power-key { gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; @@ -62,7 +62,7 @@ #address-cells = <1>; #size-cells = <0>; - max77836: subpmic@25 { + max77836: pmic@25 { compatible = "maxim,max77836"; interrupt-parent = <&gpx1>; interrupts = <5 IRQ_TYPE_NONE>; @@ -197,7 +197,7 @@ samsung,i2c-max-bus-freq = <100000>; status = "okay"; - s2mps14_pmic@66 { + pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx0>; interrupts = <7 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index b55afaaa691e..a26e3e582a7e 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -38,10 +38,10 @@ reg = <0x0205F000 0x1000>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - power_key { + power-key { gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; @@ -62,7 +62,7 @@ #address-cells = <1>; #size-cells = <0>; - max77836: subpmic@25 { + max77836: pmic@25 { compatible = "maxim,max77836"; interrupt-parent = <&gpx1>; interrupts = <5 IRQ_TYPE_NONE>; @@ -267,7 +267,7 @@ samsung,i2c-max-bus-freq = <100000>; status = "okay"; - s2mps14_pmic@66 { + pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx0>; interrupts = <7 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index a1e93fb7f694..77ab7193b903 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -439,7 +439,6 @@ clock-names = "adc", "sclk"; clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; #io-channel-cells = <1>; - io-channel-ranges; samsung,syscon-phandle = <&pmu_system_controller>; status = "disabled"; }; @@ -691,25 +690,25 @@ status = "disabled"; }; - ppmu_dmc0: ppmu_dmc0@106a0000 { + ppmu_dmc0: ppmu@106a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106a0000 0x2000>; status = "disabled"; }; - ppmu_dmc1: ppmu_dmc1@106b0000 { + ppmu_dmc1: ppmu@106b0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106b0000 0x2000>; status = "disabled"; }; - ppmu_cpu: ppmu_cpu@106c0000 { + ppmu_cpu: ppmu@106c0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106c0000 0x2000>; status = "disabled"; }; - ppmu_rightbus: ppmu_rightbus@112a0000 { + ppmu_rightbus: ppmu@112a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x112a0000 0x2000>; clocks = <&cmu CLK_PPMURIGHT>; @@ -717,7 +716,7 @@ status = "disabled"; }; - ppmu_leftbus: ppmu_leftbus0@116a0000 { + ppmu_leftbus: ppmu@116a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x116a0000 0x2000>; clocks = <&cmu CLK_PPMULEFT>; @@ -725,7 +724,7 @@ status = "disabled"; }; - ppmu_camif: ppmu_camif@11ac0000 { + ppmu_camif: ppmu@11ac0000 { compatible = "samsung,exynos-ppmu"; reg = <0x11ac0000 0x2000>; clocks = <&cmu CLK_PPMUCAMIF>; @@ -733,7 +732,7 @@ status = "disabled"; }; - ppmu_lcd0: ppmu_lcd0@11e40000 { + ppmu_lcd0: ppmu@11e40000 { compatible = "samsung,exynos-ppmu"; reg = <0x11e40000 0x2000>; clocks = <&cmu CLK_PPMULCD0>; @@ -741,7 +740,7 @@ status = "disabled"; }; - ppmu_fsys: ppmu_fsys@12630000 { + ppmu_fsys: ppmu@12630000 { compatible = "samsung,exynos-ppmu"; reg = <0x12630000 0x2000>; clocks = <&cmu CLK_PPMUFILE>; @@ -749,7 +748,7 @@ status = "disabled"; }; - ppmu_g3d: ppmu_g3d@13220000 { + ppmu_g3d: ppmu@13220000 { compatible = "samsung,exynos-ppmu"; reg = <0x13220000 0x2000>; clocks = <&cmu CLK_PPMUG3D>; @@ -757,7 +756,7 @@ status = "disabled"; }; - ppmu_mfc: ppmu_mfc@13660000 { + ppmu_mfc: ppmu@13660000 { compatible = "samsung,exynos-ppmu"; reg = <0x13660000 0x2000>; clocks = <&cmu CLK_PPMUMFC_L>; @@ -765,7 +764,7 @@ status = "disabled"; }; - bus_dmc: bus_dmc { + bus_dmc: bus-dmc { compatible = "samsung,exynos-bus"; clocks = <&cmu_dmc CLK_DIV_DMC>; clock-names = "bus"; @@ -773,9 +772,8 @@ status = "disabled"; }; - bus_dmc_opp_table: opp_table1 { + bus_dmc_opp_table: opp-table1 { compatible = "operating-points-v2"; - opp-shared; opp-50000000 { opp-hz = /bits/ 64 <50000000>; @@ -799,7 +797,7 @@ }; }; - bus_leftbus: bus_leftbus { + bus_leftbus: bus-leftbus { compatible = "samsung,exynos-bus"; clocks = <&cmu CLK_DIV_GDL>; clock-names = "bus"; @@ -807,7 +805,7 @@ status = "disabled"; }; - bus_rightbus: bus_rightbus { + bus_rightbus: bus-rightbus { compatible = "samsung,exynos-bus"; clocks = <&cmu CLK_DIV_GDR>; clock-names = "bus"; @@ -815,7 +813,7 @@ status = "disabled"; }; - bus_lcd0: bus_lcd0 { + bus_lcd0: bus-lcd0 { compatible = "samsung,exynos-bus"; clocks = <&cmu CLK_DIV_ACLK_160>; clock-names = "bus"; @@ -823,7 +821,7 @@ status = "disabled"; }; - bus_fsys: bus_fsys { + bus_fsys: bus-fsys { compatible = "samsung,exynos-bus"; clocks = <&cmu CLK_DIV_ACLK_200>; clock-names = "bus"; @@ -831,7 +829,7 @@ status = "disabled"; }; - bus_mcuisp: bus_mcuisp { + bus_mcuisp: bus-mcuisp { compatible = "samsung,exynos-bus"; clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>; clock-names = "bus"; @@ -839,7 +837,7 @@ status = "disabled"; }; - bus_isp: bus_isp { + bus_isp: bus-isp { compatible = "samsung,exynos-bus"; clocks = <&cmu CLK_DIV_ACLK_266>; clock-names = "bus"; @@ -847,7 +845,7 @@ status = "disabled"; }; - bus_peril: bus_peril { + bus_peril: bus-peril { compatible = "samsung,exynos-bus"; clocks = <&cmu CLK_DIV_ACLK_100>; clock-names = "bus"; @@ -855,7 +853,7 @@ status = "disabled"; }; - bus_mfc: bus_mfc { + bus_mfc: bus-mfc { compatible = "samsung,exynos-bus"; clocks = <&cmu CLK_SCLK_MFC>; clock-names = "bus"; @@ -863,9 +861,8 @@ status = "disabled"; }; - bus_leftbus_opp_table: opp_table2 { + bus_leftbus_opp_table: opp-table2 { compatible = "operating-points-v2"; - opp-shared; opp-50000000 { opp-hz = /bits/ 64 <50000000>; @@ -889,9 +886,8 @@ }; }; - bus_mcuisp_opp_table: opp_table3 { + bus_mcuisp_opp_table: opp-table3 { compatible = "operating-points-v2"; - opp-shared; opp-50000000 { opp-hz = /bits/ 64 <50000000>; @@ -910,9 +906,8 @@ }; }; - bus_isp_opp_table: opp_table4 { + bus_isp_opp_table: opp-table4 { compatible = "operating-points-v2"; - opp-shared; opp-50000000 { opp-hz = /bits/ 64 <50000000>; @@ -931,9 +926,8 @@ }; }; - bus_peril_opp_table: opp_table5 { + bus_peril_opp_table: opp-table5 { compatible = "operating-points-v2"; - opp-shared; opp-50000000 { opp-hz = /bits/ 64 <50000000>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index a1e54449f33f..eab77a66ae8f 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -782,7 +782,7 @@ status = "disabled"; }; - ppmu_dmc0: ppmu_dmc0@106a0000 { + ppmu_dmc0: ppmu@106a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106a0000 0x2000>; clocks = <&clock CLK_PPMUDMC0>; @@ -790,7 +790,7 @@ status = "disabled"; }; - ppmu_dmc1: ppmu_dmc1@106b0000 { + ppmu_dmc1: ppmu@106b0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106b0000 0x2000>; clocks = <&clock CLK_PPMUDMC1>; @@ -798,7 +798,7 @@ status = "disabled"; }; - ppmu_cpu: ppmu_cpu@106c0000 { + ppmu_cpu: ppmu@106c0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106c0000 0x2000>; clocks = <&clock CLK_PPMUCPU>; @@ -806,7 +806,7 @@ status = "disabled"; }; - ppmu_rightbus: ppmu_rightbus@112a0000 { + ppmu_rightbus: ppmu@112a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x112a0000 0x2000>; clocks = <&clock CLK_PPMURIGHT>; @@ -814,7 +814,7 @@ status = "disabled"; }; - ppmu_leftbus: ppmu_leftbus0@116a0000 { + ppmu_leftbus: ppmu@116a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x116a0000 0x2000>; clocks = <&clock CLK_PPMULEFT>; @@ -822,7 +822,7 @@ status = "disabled"; }; - ppmu_camif: ppmu_camif@11ac0000 { + ppmu_camif: ppmu@11ac0000 { compatible = "samsung,exynos-ppmu"; reg = <0x11ac0000 0x2000>; clocks = <&clock CLK_PPMUCAMIF>; @@ -830,7 +830,7 @@ status = "disabled"; }; - ppmu_lcd0: ppmu_lcd0@11e40000 { + ppmu_lcd0: ppmu@11e40000 { compatible = "samsung,exynos-ppmu"; reg = <0x11e40000 0x2000>; clocks = <&clock CLK_PPMULCD0>; @@ -838,13 +838,13 @@ status = "disabled"; }; - ppmu_fsys: ppmu_g3d@12630000 { + ppmu_fsys: ppmu@12630000 { compatible = "samsung,exynos-ppmu"; reg = <0x12630000 0x2000>; status = "disabled"; }; - ppmu_image: ppmu_image@12aa0000 { + ppmu_image: ppmu@12aa0000 { compatible = "samsung,exynos-ppmu"; reg = <0x12aa0000 0x2000>; clocks = <&clock CLK_PPMUIMAGE>; @@ -852,7 +852,7 @@ status = "disabled"; }; - ppmu_tv: ppmu_tv@12e40000 { + ppmu_tv: ppmu@12e40000 { compatible = "samsung,exynos-ppmu"; reg = <0x12e40000 0x2000>; clocks = <&clock CLK_PPMUTV>; @@ -860,7 +860,7 @@ status = "disabled"; }; - ppmu_g3d: ppmu_g3d@13220000 { + ppmu_g3d: ppmu@13220000 { compatible = "samsung,exynos-ppmu"; reg = <0x13220000 0x2000>; clocks = <&clock CLK_PPMUG3D>; @@ -868,7 +868,7 @@ status = "disabled"; }; - ppmu_mfc_left: ppmu_mfc_left@13660000 { + ppmu_mfc_left: ppmu@13660000 { compatible = "samsung,exynos-ppmu"; reg = <0x13660000 0x2000>; clocks = <&clock CLK_PPMUMFC_L>; @@ -876,7 +876,7 @@ status = "disabled"; }; - ppmu_mfc_right: ppmu_mfc_right@13670000 { + ppmu_mfc_right: ppmu@13670000 { compatible = "samsung,exynos-ppmu"; reg = <0x13670000 0x2000>; clocks = <&clock CLK_PPMUMFC_R>; diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index 5370ee477186..a0c3bab382ae 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -329,7 +329,7 @@ pinctrl-0 = <&i2c3_bus>; pinctrl-names = "default"; - mxt224-touchscreen@4a { + touchscreen@4a { compatible = "atmel,maxtouch"; reg = <0x4a>; @@ -348,7 +348,7 @@ pinctrl-0 = <&i2c5_bus>; pinctrl-names = "default"; - max8997_pmic@66 { + pmic@66 { compatible = "maxim,max8997-pmic"; reg = <0x66>; @@ -597,7 +597,7 @@ pinctrl-0 = <&i2c7_bus>; pinctrl-names = "default"; - ak8975@c { + magnetometer@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 7d2cfbafefb2..1c5394152561 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -43,7 +43,7 @@ enable-active-high; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; up { @@ -171,7 +171,7 @@ pinctrl-0 = <&i2c0_bus>; pinctrl-names = "default"; - max8997_pmic@66 { + pmic@66 { compatible = "maxim,max8997-pmic"; reg = <0x66>; interrupt-parent = <&gpx0>; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index c5609afa6101..d5797a67bf48 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -90,61 +90,61 @@ pinctrl-0 = <&keypad_rows &keypad_cols>; status = "okay"; - key_1 { + key-1 { keypad,row = <0>; keypad,column = <3>; linux,code = <2>; }; - key_2 { + key-2 { keypad,row = <0>; keypad,column = <4>; linux,code = <3>; }; - key_3 { + key-3 { keypad,row = <0>; keypad,column = <5>; linux,code = <4>; }; - key_4 { + key-4 { keypad,row = <0>; keypad,column = <6>; linux,code = <5>; }; - key_5 { + key-5 { keypad,row = <0>; keypad,column = <7>; linux,code = <6>; }; - key_a { + key-a { keypad,row = <1>; keypad,column = <3>; linux,code = <30>; }; - key_b { + key-b { keypad,row = <1>; keypad,column = <4>; linux,code = <48>; }; - key_c { + key-c { keypad,row = <1>; keypad,column = <5>; linux,code = <46>; }; - key_d { + key-d { keypad,row = <1>; keypad,column = <6>; linux,code = <32>; }; - key_e { + key-e { keypad,row = <1>; keypad,column = <7>; linux,code = <18>; @@ -200,7 +200,7 @@ cs-gpios = <&gpc1 2 GPIO_ACTIVE_HIGH>; status = "okay"; - w25x80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "w25x80"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index a226bec56a45..d2406c9146b8 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -263,7 +263,7 @@ pinctrl-names = "default"; status = "okay"; - mms114-touchscreen@48 { + touchscreen@48 { compatible = "melfas,mms114"; reg = <0x48>; interrupt-parent = <&gpx0>; @@ -283,7 +283,7 @@ pinctrl-names = "default"; status = "okay"; - max8997_pmic@66 { + pmic@66 { compatible = "maxim,max8997-pmic"; reg = <0x66>; @@ -462,6 +462,26 @@ }; }; +&pinctrl_1 { + bt_shutdown: bt-shutdown { + samsung,pins = "gpl1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_host_wakeup: bt-host-wakeup { + samsung,pins = "gpx2-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_device_wakeup: bt-device-wakeup { + samsung,pins = "gpx3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; + &rtc { status = "okay"; clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; @@ -512,6 +532,17 @@ &serial_0 { status = "okay"; + pinctrl-0 = <&uart0_data &uart0_fctl>; + pinctrl-names = "default"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>; + pinctrl-names = "default"; + shutdown-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + }; }; &serial_1 { diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 08284e8f3624..dd44ad2c6ad6 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -532,6 +532,24 @@ }; &pinctrl_1 { + bt_shutdown: bt-shutdown { + samsung,pins = "gpe1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_host_wakeup: bt-host-wakeup { + samsung,pins = "gpx2-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_device_wakeup: bt-device-wakeup { + samsung,pins = "gpx3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + lp3974_irq: lp3974-irq { samsung,pins = "gpx0-7", "gpx2-7"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; @@ -608,6 +626,17 @@ status = "okay"; /delete-property/dmas; /delete-property/dma-names; + pinctrl-0 = <&uart0_data &uart0_fctl>; + pinctrl-names = "default"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>; + pinctrl-names = "default"; + shutdown-gpios = <&gpe1 4 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + }; }; &serial_1 { diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index fddc661ded28..70baad9b11f0 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -168,13 +168,13 @@ iommus = <&sysmmu_g2d>; }; - ppmu_acp: ppmu_acp@10ae0000 { + ppmu_acp: ppmu@10ae0000 { compatible = "samsung,exynos-ppmu"; reg = <0x10ae0000 0x2000>; status = "disabled"; }; - ppmu_lcd1: ppmu_lcd1@12240000 { + ppmu_lcd1: ppmu@12240000 { compatible = "samsung,exynos-ppmu"; reg = <0x12240000 0x2000>; clocks = <&clock CLK_PPMULCD1>; @@ -204,7 +204,7 @@ #iommu-cells = <0>; }; - bus_dmc: bus_dmc { + bus_dmc: bus-dmc { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DIV_DMC>; clock-names = "bus"; @@ -212,7 +212,7 @@ status = "disabled"; }; - bus_acp: bus_acp { + bus_acp: bus-acp { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DIV_ACP>; clock-names = "bus"; @@ -220,7 +220,7 @@ status = "disabled"; }; - bus_peri: bus_peri { + bus_peri: bus-peri { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_ACLK100>; clock-names = "bus"; @@ -228,7 +228,7 @@ status = "disabled"; }; - bus_fsys: bus_fsys { + bus_fsys: bus-fsys { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_ACLK133>; clock-names = "bus"; @@ -236,7 +236,7 @@ status = "disabled"; }; - bus_display: bus_display { + bus_display: bus-display { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_ACLK160>; clock-names = "bus"; @@ -244,7 +244,7 @@ status = "disabled"; }; - bus_lcd0: bus_lcd0 { + bus_lcd0: bus-lcd0 { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_ACLK200>; clock-names = "bus"; @@ -252,7 +252,7 @@ status = "disabled"; }; - bus_leftbus: bus_leftbus { + bus_leftbus: bus-leftbus { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DIV_GDL>; clock-names = "bus"; @@ -260,7 +260,7 @@ status = "disabled"; }; - bus_rightbus: bus_rightbus { + bus_rightbus: bus-rightbus { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DIV_GDR>; clock-names = "bus"; @@ -268,7 +268,7 @@ status = "disabled"; }; - bus_mfc: bus_mfc { + bus_mfc: bus-mfc { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_SCLK_MFC>; clock-names = "bus"; @@ -276,7 +276,7 @@ status = "disabled"; }; - bus_dmc_opp_table: opp_table1 { + bus_dmc_opp_table: opp-table1 { compatible = "operating-points-v2"; opp-shared; @@ -295,7 +295,7 @@ }; }; - bus_acp_opp_table: opp_table2 { + bus_acp_opp_table: opp-table2 { compatible = "operating-points-v2"; opp-shared; @@ -310,7 +310,7 @@ }; }; - bus_peri_opp_table: opp_table3 { + bus_peri_opp_table: opp-table3 { compatible = "operating-points-v2"; opp-shared; @@ -322,7 +322,7 @@ }; }; - bus_fsys_opp_table: opp_table4 { + bus_fsys_opp_table: opp-table4 { compatible = "operating-points-v2"; opp-shared; @@ -334,7 +334,7 @@ }; }; - bus_display_opp_table: opp_table5 { + bus_display_opp_table: opp-table5 { compatible = "operating-points-v2"; opp-shared; @@ -349,7 +349,7 @@ }; }; - bus_leftbus_opp_table: opp_table6 { + bus_leftbus_opp_table: opp-table6 { compatible = "operating-points-v2"; opp-shared; @@ -463,7 +463,7 @@ "ppmmu3"; operating-points-v2 = <&gpu_opp_table>; - gpu_opp_table: opp_table { + gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-160000000 { diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi index 89ed81fb348d..c14e37dc3a9b 100644 --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -15,7 +15,7 @@ i2c10 = &i2c_cm36651; }; - aat1290 { + led-controller { compatible = "skyworks,aat1290"; flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>; enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; @@ -58,9 +58,8 @@ i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; - status = "okay"; - ak8975@c { + magnetometer@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; @@ -75,7 +74,7 @@ #address-cells = <1>; #size-cells = <0>; - cm36651@18 { + light-sensor@18 { compatible = "capella,cm36651"; reg = <0x18>; interrupt-parent = <&gpx0>; @@ -133,7 +132,7 @@ }; &i2c_3 { - mms114-touchscreen@48 { + touchscreen@48 { compatible = "melfas,mms114"; reg = <0x48>; interrupt-parent = <&gpm2>; diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index f6d0a5f5d339..47431307cb3c 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -175,7 +175,7 @@ pinctrl-names = "default"; status = "okay"; - codec: wm8960@1a { + codec: audio-codec@1a { compatible = "wlf,wm8960"; reg = <0x1a>; clocks = <&pmu_system_controller 0>; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index dfceb155b3a7..4583d342af39 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -134,7 +134,7 @@ pinctrl-names = "default"; status = "okay"; - s5m8767: s5m8767-pmic@66 { + s5m8767: pmic@66 { compatible = "samsung,s5m8767-pmic"; reg = <0x66>; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 7e7c243ff196..111c32bae02c 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -169,9 +169,8 @@ i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; - status = "okay"; - max77693@66 { + pmic@66 { compatible = "maxim,max77693"; interrupt-parent = <&gpx1>; interrupts = <5 IRQ_TYPE_EDGE_FALLING>; @@ -193,7 +192,7 @@ }; }; - max77693_haptic { + motor-driver { compatible = "maxim,max77693-haptic"; haptic-supply = <&ldo26_reg>; pwms = <&pwm 0 38022 0>; @@ -218,9 +217,8 @@ i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; - status = "okay"; - max77693-fuel-gauge@36 { + fuel-gauge@36 { compatible = "maxim,max17047"; interrupt-parent = <&gpx2>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; @@ -262,7 +260,6 @@ pinctrl-0 = <&i2c_mhl_bus>; pinctrl-names = "default"; - status = "okay"; sii9234: hdmi-bridge@39 { compatible = "sil,sii9234"; @@ -550,7 +547,7 @@ pinctrl-names = "default"; status = "okay"; - s5c73m3: s5c73m3@3c { + s5c73m3: image-sensor@3c { compatible = "samsung,s5c73m3"; reg = <0x3c>; xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ @@ -577,7 +574,7 @@ pinctrl-0 = <&fimc_is_i2c1>; pinctrl-names = "default"; - s5k6a3@10 { + image-sensor@10 { compatible = "samsung,s5k6a3"; reg = <0x10>; svdda-supply = <&cam_io_reg>; @@ -616,7 +613,7 @@ pinctrl-names = "default"; status = "okay"; - wm1811: wm1811@1a { + wm1811: audio-codec@1a { compatible = "wlf,wm1811"; reg = <0x1a>; clocks = <&pmu_system_controller 0>, @@ -665,7 +662,7 @@ pinctrl-names = "default"; status = "okay"; - max77686: max77686_pmic@9 { + max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&gpx0>; interrupts = <7 IRQ_TYPE_NONE>; @@ -1109,6 +1106,21 @@ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; + bt_shutdown: bt-shutdown { + samsung,pins = "gpl0-6"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_host_wakeup: bt-host-wakeup { + samsung,pins = "gpx2-6"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_device_wakeup: bt-device-wakeup { + samsung,pins = "gpx3-1"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + max77686_irq: max77686-irq { samsung,pins = "gpx0-7"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; @@ -1386,7 +1398,20 @@ }; &serial_0 { + pinctrl-0 = <&uart0_data &uart0_fctl>; + pinctrl-names = "default"; status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>; + pinctrl-names = "default"; + max-speed = <3000000>; + shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + clocks = <&max77686 MAX77686_CLK_PMIC>; + }; }; &serial_1 { @@ -1407,7 +1432,7 @@ cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; status = "okay"; - s5c73m3_spi: s5c73m3@0 { + s5c73m3_spi: image-sensor@0 { compatible = "samsung,s5c73m3"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts index a47b7f35fc80..c49dbb7847b8 100644 --- a/arch/arm/boot/dts/exynos4412-n710x.dts +++ b/arch/arm/boot/dts/exynos4412-n710x.dts @@ -45,7 +45,7 @@ pinctrl-names = "default"; status = "okay"; - mms152-touchscreen@48 { + touchscreen@48 { compatible = "melfas,mms152"; reg = <0x48>; interrupt-parent = <&gpm2>; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index ab291cec650a..2b20d9095d9f 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -22,12 +22,12 @@ reg = <0x0204F000 0x1000>; }; - gpio_keys { + gpio_keys: gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&gpio_power_key>; - power_key { + power-key { gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; @@ -122,7 +122,6 @@ }; &clock { - clocks = <&clock CLK_XUSBXTI>; assigned-clocks = <&clock CLK_FOUT_EPLL>; assigned-clock-rates = <45158401>; }; @@ -172,7 +171,7 @@ }; &pinctrl_1 { - gpio_power_key: power_key { + gpio_power_key: power-key { samsung,pins = "gpx1-3"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; @@ -256,7 +255,6 @@ }; &hsotg { - dr_mode = "peripheral"; status = "okay"; vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; @@ -267,7 +265,7 @@ samsung,i2c-max-bus-freq = <400000>; status = "okay"; - usb3503: usb3503@8 { + usb3503: usb-hub@8 { compatible = "smsc,usb3503"; reg = <0x08>; @@ -493,7 +491,7 @@ &i2c_1 { status = "okay"; - max98090: max98090@10 { + max98090: audio-codec@10 { compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpx0>; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index b8549d846f86..efaf7533e84f 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -16,11 +16,24 @@ model = "Hardkernel ODROID-U3 board based on Exynos4412"; compatible = "hardkernel,odroid-u3", "samsung,exynos4412", "samsung,exynos4"; + aliases { + ethernet = ðernet; + }; + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x7FF00000>; }; + vbus_otg_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VBUS_VDD_5.0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpl2 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + leds { compatible = "gpio-leds"; led1 { @@ -101,8 +114,21 @@ }; &ehci { + #address-cells = <1>; + #size-cells = <0>; phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>; phy-names = "hsic0", "hsic1"; + + ethernet: usbether@2 { + compatible = "usb0424,9730"; + reg = <2>; + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ + }; +}; + +&hsotg { + dr_mode = "otg"; + vbus-supply = <&vbus_otg_reg>; }; &sound { diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 3ea2a0101e80..0e9d626e740a 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -15,6 +15,10 @@ model = "Hardkernel ODROID-X board based on Exynos4412"; compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4"; + aliases { + ethernet = ðernet; + }; + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x3FF00000>; @@ -36,19 +40,7 @@ }; }; - gpio_keys { - pinctrl-0 = <&gpio_power_key &gpio_home_key>; - - home_key { - gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_HOME>; - label = "home key"; - debounce-interval = <10>; - wakeup-source; - }; - }; - - regulator_p3v3 { + regulator-1 { compatible = "regulator-fixed"; regulator-name = "p3v3_en"; regulator-min-microvolt = <3300000>; @@ -72,8 +64,46 @@ }; &ehci { + #address-cells = <1>; + #size-cells = <0>; phys = <&exynos_usbphy 2>; phy-names = "hsic0"; + + hub@2 { + compatible = "usb0424,3503"; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb0424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb0424,ec00"; + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ + }; + }; + }; +}; + +&gpio_keys { + pinctrl-0 = <&gpio_power_key &gpio_home_key>; + + home-key { + gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_HOME>; + label = "home key"; + debounce-interval = <10>; + wakeup-source; + }; +}; + +&hsotg { + dr_mode = "peripheral"; }; &mshc_0 { @@ -81,7 +111,7 @@ }; &pinctrl_1 { - gpio_home_key: home_key { + gpio_home_key: home-key { samsung,pins = "gpx2-2"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index c2e793b69e7d..e1f6de53e20e 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -116,7 +116,7 @@ pinctrl-names = "default"; status = "okay"; - s5m8767_pmic@66 { + pmic@66 { compatible = "samsung,s5m8767-pmic"; reg = <0x66>; @@ -453,37 +453,37 @@ pinctrl-names = "default"; status = "okay"; - key_home { + key-home { keypad,row = <0>; keypad,column = <0>; linux,code = <KEY_HOME>; }; - key_down { + key-down { keypad,row = <0>; keypad,column = <1>; linux,code = <KEY_DOWN>; }; - key_up { + key-up { keypad,row = <1>; keypad,column = <0>; linux,code = <KEY_UP>; }; - key_menu { + key-menu { keypad,row = <1>; keypad,column = <1>; linux,code = <KEY_MENU>; }; - key_back { + key-back { keypad,row = <2>; keypad,column = <0>; linux,code = <KEY_BACK>; }; - key_enter { + key-enter { keypad,row = <2>; keypad,column = <1>; linux,code = <KEY_ENTER>; diff --git a/arch/arm/boot/dts/exynos4412-p4note-n8010.dts b/arch/arm/boot/dts/exynos4412-p4note-n8010.dts new file mode 100644 index 000000000000..9f559425bd2c --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-p4note-n8010.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Galaxy Note 10.1 - N801x (wifi only version) + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + */ + +/dts-v1/; +#include "exynos4412-p4note.dtsi" + +/ { + model = "Samsung Galaxy Note 10.1 (GT-N8010/N8013) based on Exynos4412"; + compatible = "samsung,n8010", "samsung,p4note", "samsung,exynos4412", "samsung,exynos4"; + + /* this is the base variant without any kind of modem */ +}; diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi new file mode 100644 index 000000000000..b2f9d5448a18 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi @@ -0,0 +1,1132 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos4412 based p4note device family base DT. + * Based on exynos4412-midas.dtsi. + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + */ + +/dts-v1/; +#include "exynos4412.dtsi" +#include "exynos4412-ppmu-common.dtsi" + +#include <dt-bindings/clock/maxim,max77686.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/samsung.h> + +/ { + compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4"; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; + + chosen { + stdout-path = &serial_2; + }; + + firmware@204f000 { + compatible = "samsung,secure-firmware"; + reg = <0x0204F000 0x1000>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys>; + + key-down { + gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + label = "volume down"; + debounce-interval = <10>; + }; + + key-up { + gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + label = "volume up"; + debounce-interval = <10>; + }; + + key-power { + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "power"; + debounce-interval = <10>; + wakeup-source; + }; + }; + + voltage-regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "TSP_LDO1"; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_reg_gpio_1>; + gpios = <&gpm4 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + voltage-regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "TSP_LDO2"; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_reg_gpio_2>; + gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + voltage-regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "TSP_LDO3"; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_reg_gpio_3>; + gpios = <&gpb 7 GPIO_ACTIVE_HIGH>; + startup-delay-us = <20000>; + enable-active-high; + regulator-always-on; + }; + + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&wifi_reset>; + pinctrl-names = "default"; + clocks = <&max77686 MAX77686_CLK_PMIC>; + clock-names = "ext_clock"; + }; + + i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + pinctrl-0 = <&ak8975_irq>; + pinctrl-names = "default"; + interrupt-parent = <&gpm4>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + }; + }; + + i2c-gpio-2 { + compatible = "i2c-gpio"; + sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + fuel-gauge@36 { + compatible = "maxim,max17042"; + reg = <0x36>; + pinctrl-0 = <&fuel_alert_irq>; + pinctrl-names = "default"; + interrupt-parent = <&gpx2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <600>; + maxim,over-volt = <4300>; + }; + }; + + i2c-gpio-3 { + compatible = "i2c-gpio"; + sda-gpios = <&gpm4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpm4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <5>; + #address-cells = <1>; + #size-cells = <0>; + + adc@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + pinctrl-0 = <&stmpe_adc_irq>; + pinctrl-names = "default"; + interrupt-parent = <&gpx0>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + irq-trigger = <0x1>; + st,adc-freq = <3>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,sample-time = <3>; + + stmpe_adc { + compatible = "st,stmpe-adc"; + #io-channel-cells = <1>; + st,norequest-mask = <0x2F>; + }; + }; + }; +}; + +&adc { + vdd-supply = <&ldo3_reg>; + /* not verified */ + status = "okay"; +}; + +&bus_dmc { + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; + vdd-supply = <&buck1_reg>; + status = "okay"; +}; + +&bus_acp { + devfreq = <&bus_dmc>; + status = "okay"; +}; + +&bus_c2c { + devfreq = <&bus_dmc>; + status = "okay"; +}; + +&bus_leftbus { + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; + vdd-supply = <&buck3_reg>; + status = "okay"; +}; + +&bus_rightbus { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_display { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_fsys { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_peri { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_mfc { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + +&cpu_thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, + <&cpu2 13 13>, <&cpu3 13 13>; + }; + }; +}; + +&exynos_usbphy { + status = "okay"; +}; + +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; + pinctrl-names = "default"; + status = "okay"; + + display-timings { + timing0 { + clock-frequency = <66666666>; + hactive = <1280>; + vactive = <800>; + hfront-porch = <18>; + hback-porch = <36>; + hsync-len = <16>; + vback-porch = <16>; + vfront-porch = <4>; + vsync-len = <3>; + hsync-active = <1>; + }; + }; +}; + +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + +&hsotg { + vusb_a-supply = <&ldo12_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&i2c_3 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + pinctrl-0 = <&tsp_rst &tsp_irq>; + pinctrl-names = "default"; + interrupt-parent = <&gpm2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpm0 4 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c_7 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c7_bus>; + pinctrl-names = "default"; + status = "okay"; + + max77686: pmic@9 { + compatible = "maxim,max77686"; + interrupt-parent = <&gpx0>; + interrupts = <7 IRQ_TYPE_NONE>; + pinctrl-0 = <&max77686_irq>; + pinctrl-names = "default"; + reg = <0x09>; + #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "ldo1"; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "ldo2"; + regulator-always-on; + }; + + /* WM8994 audio */ + ldo3_reg: LDO3 { + regulator-name = "VCC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "VCC_1.8V_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo6_reg: LDO6 { + regulator-name = "ldo6"; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "ldo7"; + regulator-always-on; + }; + + /* CSI IP block */ + ldo8_reg: LDO8 { + regulator-name = "VMIPI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + /* IR LED on/off */ + ldo9_reg: LDO9 { + regulator-name = "VLED_IC_1.9V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* CSI IP block */ + ldo10_reg: LDO10 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo11_reg: LDO11 { + regulator-name = "VABB1_1.9V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* USB OTG */ + ldo12_reg: LDO12 { + regulator-name = "VUOTG_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + /* not connected */ + ldo13_reg: LDO13 { + regulator-name = "ldo13"; + }; + + ldo14_reg: LDO14 { + regulator-name = "VABB2_1.9V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo15_reg: LDO15 { + regulator-name = "ldo15"; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "ldo16"; + regulator-always-on; + }; + + /* not connected */ + ldo17_reg: LDO17 { + regulator-name = "ldo17"; + }; + + /* Camera ISX012 */ + ldo18_reg: LDO18 { + regulator-name = "CAM_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* Camera S5K6A3 */ + ldo19_reg: LDO19 { + regulator-name = "VT_CORE_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* not connected */ + ldo20_reg: LDO20 { + regulator-name = "ldo20"; + }; + + /* MMC2 */ + ldo21_reg: LDO21 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; + }; + + /* not connected */ + ldo22_reg: LDO22 { + regulator-name = "ldo22"; + }; + + /* ADC */ + ldo23_reg: LDO23 { + regulator-name = "VDD_ADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* Camera S5K6A3 */ + ldo24_reg: LDO24 { + regulator-name = "CAM_A2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo25_reg: LDO25 { + regulator-name = "VLED_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* Camera ISX012 */ + ldo26_reg: LDO26 { + regulator-name = "3MP_AF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_MIF"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VDD_ARM"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VDD_INT"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "VDD_G3D"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1075000>; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "buck5"; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "buck6"; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "buck7"; + regulator-always-on; + }; + + /* not connected */ + buck8_reg: BUCK8 { + regulator-name = "buck8"; + }; + + buck9_reg: BUCK9 { + regulator-name = "3MP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&mshc_0 { + broken-cd; + non-removable; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <0>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + status = "okay"; +}; + +&pinctrl_0 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep0>; + + tsp_reg_gpio_2: tsp-reg-gpio-2 { + samsung,pins = "gpb-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + tsp_reg_gpio_3: tsp-reg-gpio-3 { + samsung,pins = "gpb-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + sleep0: sleep-states { + PIN_SLP(gpa0-0, INPUT, NONE); + PIN_SLP(gpa0-1, OUT0, NONE); + PIN_SLP(gpa0-2, INPUT, NONE); + PIN_SLP(gpa0-3, INPUT, UP); + PIN_SLP(gpa0-4, INPUT, NONE); + PIN_SLP(gpa0-5, INPUT, DOWN); + PIN_SLP(gpa0-6, INPUT, DOWN); + PIN_SLP(gpa0-7, INPUT, UP); + + PIN_SLP(gpa1-0, INPUT, DOWN); + PIN_SLP(gpa1-1, INPUT, DOWN); + PIN_SLP(gpa1-2, INPUT, DOWN); + PIN_SLP(gpa1-3, INPUT, DOWN); + PIN_SLP(gpa1-4, INPUT, DOWN); + PIN_SLP(gpa1-5, INPUT, DOWN); + + PIN_SLP(gpb-0, INPUT, NONE); + PIN_SLP(gpb-1, INPUT, NONE); + PIN_SLP(gpb-2, INPUT, NONE); + PIN_SLP(gpb-3, INPUT, NONE); + PIN_SLP(gpb-4, INPUT, DOWN); + PIN_SLP(gpb-5, INPUT, DOWN); + PIN_SLP(gpb-6, INPUT, DOWN); + PIN_SLP(gpb-7, INPUT, DOWN); + + PIN_SLP(gpc0-0, INPUT, DOWN); + PIN_SLP(gpc0-1, INPUT, DOWN); + PIN_SLP(gpc0-2, INPUT, DOWN); + PIN_SLP(gpc0-3, INPUT, DOWN); + PIN_SLP(gpc0-4, INPUT, DOWN); + + PIN_SLP(gpc1-0, INPUT, UP); + PIN_SLP(gpc1-1, PREV, NONE); + PIN_SLP(gpc1-2, INPUT, UP); + PIN_SLP(gpc1-3, INPUT, UP); + PIN_SLP(gpc1-4, INPUT, UP); + + PIN_SLP(gpd0-0, INPUT, DOWN); + PIN_SLP(gpd0-1, OUT0, NONE); + PIN_SLP(gpd0-2, INPUT, NONE); + PIN_SLP(gpd0-3, INPUT, NONE); + + PIN_SLP(gpd1-0, INPUT, DOWN); + PIN_SLP(gpd1-1, INPUT, DOWN); + PIN_SLP(gpd1-2, INPUT, NONE); + PIN_SLP(gpd1-3, INPUT, NONE); + + PIN_SLP(gpf0-0, OUT0, NONE); + PIN_SLP(gpf0-1, OUT0, NONE); + PIN_SLP(gpf0-2, OUT0, NONE); + PIN_SLP(gpf0-3, OUT0, NONE); + PIN_SLP(gpf0-4, OUT0, NONE); + PIN_SLP(gpf0-5, OUT0, NONE); + PIN_SLP(gpf0-6, OUT0, NONE); + PIN_SLP(gpf0-7, OUT0, NONE); + + PIN_SLP(gpf1-0, OUT0, NONE); + PIN_SLP(gpf1-1, OUT0, NONE); + PIN_SLP(gpf1-2, OUT0, NONE); + PIN_SLP(gpf1-3, OUT0, NONE); + PIN_SLP(gpf1-4, OUT0, NONE); + PIN_SLP(gpf1-5, OUT0, NONE); + PIN_SLP(gpf1-6, OUT0, NONE); + PIN_SLP(gpf1-7, OUT0, NONE); + + PIN_SLP(gpf2-0, OUT0, NONE); + PIN_SLP(gpf2-1, OUT0, NONE); + PIN_SLP(gpf2-2, OUT0, NONE); + PIN_SLP(gpf2-3, OUT0, NONE); + PIN_SLP(gpf2-4, OUT0, NONE); + PIN_SLP(gpf2-5, OUT0, NONE); + PIN_SLP(gpf2-6, OUT0, NONE); + PIN_SLP(gpf2-7, OUT0, NONE); + + PIN_SLP(gpf3-0, OUT0, NONE); + PIN_SLP(gpf3-1, OUT0, NONE); + PIN_SLP(gpf3-2, OUT0, NONE); + PIN_SLP(gpf3-3, OUT0, NONE); + PIN_SLP(gpf3-4, OUT0, NONE); + PIN_SLP(gpf3-5, OUT0, NONE); + + PIN_SLP(gpj0-0, INPUT, DOWN); + PIN_SLP(gpj0-1, INPUT, DOWN); + PIN_SLP(gpj0-2, INPUT, DOWN); + PIN_SLP(gpj0-3, PREV, NONE); + PIN_SLP(gpj0-4, PREV, NONE); + PIN_SLP(gpj0-5, OUT0, NONE); + PIN_SLP(gpj0-6, OUT0, NONE); + PIN_SLP(gpj0-7, OUT0, NONE); + + PIN_SLP(gpj1-0, OUT0, NONE); + PIN_SLP(gpj1-1, INPUT, DOWN); + PIN_SLP(gpj1-2, PREV, NONE); + PIN_SLP(gpj1-3, OUT0, NONE); + }; +}; + +&pinctrl_1 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep1>; + + sd3_wifi: sd3-wifi { + samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_shutdown: bt-shutdown { + samsung,pins = "gpl0-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart_sel: uart-sel { + samsung,pins = "gpl2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-val = <1>; + /* 0 = CP, 1 = AP (serial output) */ + }; + + tsp_rst: tsp-rst { + samsung,pins = "gpm0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + tsp_irq: tsp-irq { + samsung,pins = "gpm2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + wifi_reset: wifi-reset { + samsung,pins = "gpm3-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + tsp_reg_gpio_1: tsp-reg-gpio-1 { + samsung,pins = "gpm4-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + ak8975_irq: ak8975-irq { + samsung,pins = "gpm4-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + stmpe_adc_irq: stmpe-adc-irq { + samsung,pins = "gpx0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx0-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + gpio_keys: gpio-keys { + samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + fuel_alert_irq: fuel-alert-irq { + samsung,pins = "gpx2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + wifi_host_wake: wifi-host-wake { + samsung,pins = "gpx2-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + bt_host_wakeup: bt-host-wakeup { + samsung,pins = "gpx2-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_device_wakeup: bt-device-wakeup { + samsung,pins = "gpx3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + sdhci2_cd: sdhci2-cd { + samsung,pins = "gpx3-4"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + sleep1: sleep-states { + PIN_SLP(gpk0-0, PREV, NONE); + PIN_SLP(gpk0-1, PREV, NONE); + PIN_SLP(gpk0-2, PREV, NONE); + PIN_SLP(gpk0-3, PREV, NONE); + PIN_SLP(gpk0-4, PREV, NONE); + PIN_SLP(gpk0-5, PREV, NONE); + PIN_SLP(gpk0-6, PREV, NONE); + + PIN_SLP(gpk1-0, INPUT, DOWN); + PIN_SLP(gpk1-1, INPUT, DOWN); + PIN_SLP(gpk1-2, INPUT, DOWN); + PIN_SLP(gpk1-3, PREV, NONE); + PIN_SLP(gpk1-4, PREV, NONE); + PIN_SLP(gpk1-5, PREV, NONE); + PIN_SLP(gpk1-6, PREV, NONE); + + PIN_SLP(gpk2-0, INPUT, DOWN); + PIN_SLP(gpk2-1, INPUT, DOWN); + PIN_SLP(gpk2-2, INPUT, DOWN); + PIN_SLP(gpk2-3, INPUT, DOWN); + PIN_SLP(gpk2-4, INPUT, DOWN); + PIN_SLP(gpk2-5, INPUT, DOWN); + PIN_SLP(gpk2-6, INPUT, DOWN); + + PIN_SLP(gpk3-0, OUT0, NONE); + PIN_SLP(gpk3-1, INPUT, NONE); + PIN_SLP(gpk3-2, INPUT, DOWN); + PIN_SLP(gpk3-3, INPUT, NONE); + PIN_SLP(gpk3-4, INPUT, NONE); + PIN_SLP(gpk3-5, INPUT, NONE); + PIN_SLP(gpk3-6, INPUT, NONE); + + PIN_SLP(gpl0-0, OUT0, NONE); + PIN_SLP(gpl0-1, INPUT, NONE); + PIN_SLP(gpl0-2, INPUT, NONE); + PIN_SLP(gpl0-3, INPUT, DOWN); + PIN_SLP(gpl0-4, PREV, NONE); + PIN_SLP(gpl0-6, PREV, NONE); + + PIN_SLP(gpl1-0, OUT0, NONE); + PIN_SLP(gpl1-1, OUT0, NONE); + + PIN_SLP(gpl2-0, INPUT, DOWN); + PIN_SLP(gpl2-1, INPUT, DOWN); + PIN_SLP(gpl2-2, INPUT, DOWN); + PIN_SLP(gpl2-3, INPUT, DOWN); + PIN_SLP(gpl2-4, OUT0, NONE); + PIN_SLP(gpl2-5, INPUT, DOWN); + PIN_SLP(gpl2-6, PREV, NONE); + PIN_SLP(gpl2-7, PREV, NONE); + + PIN_SLP(gpm0-0, PREV, NONE); + PIN_SLP(gpm0-1, OUT0, NONE); + PIN_SLP(gpm0-2, INPUT, DOWN); + PIN_SLP(gpm0-3, INPUT, NONE); + PIN_SLP(gpm0-4, OUT0, NONE); + PIN_SLP(gpm0-5, OUT0, NONE); + PIN_SLP(gpm0-6, INPUT, DOWN); + PIN_SLP(gpm0-7, OUT0, NONE); + + PIN_SLP(gpm1-0, INPUT, NONE); + PIN_SLP(gpm1-1, INPUT, NONE); + PIN_SLP(gpm1-2, INPUT, NONE); + PIN_SLP(gpm1-3, INPUT, NONE); + PIN_SLP(gpm1-4, INPUT, NONE); + PIN_SLP(gpm1-5, INPUT, NONE); + PIN_SLP(gpm1-6, INPUT, DOWN); + + PIN_SLP(gpm2-0, INPUT, NONE); + PIN_SLP(gpm2-1, INPUT, NONE); + PIN_SLP(gpm2-2, OUT0, NONE); + PIN_SLP(gpm2-3, OUT0, DOWN); + PIN_SLP(gpm2-4, INPUT, DOWN); + + PIN_SLP(gpm3-0, PREV, NONE); + PIN_SLP(gpm3-1, PREV, NONE); + PIN_SLP(gpm3-2, PREV, NONE); + PIN_SLP(gpm3-3, OUT1, NONE); + PIN_SLP(gpm3-4, OUT0, DOWN); + PIN_SLP(gpm3-5, PREV, NONE); + PIN_SLP(gpm3-6, PREV, NONE); + PIN_SLP(gpm3-7, OUT0, NONE); + + PIN_SLP(gpm4-0, INPUT, NONE); + PIN_SLP(gpm4-1, INPUT, NONE); + PIN_SLP(gpm4-2, INPUT, DOWN); + PIN_SLP(gpm4-3, INPUT, DOWN); + PIN_SLP(gpm4-4, PREV, NONE); + PIN_SLP(gpm4-5, OUT0, NONE); + PIN_SLP(gpm4-6, OUT0, NONE); + PIN_SLP(gpm4-7, INPUT, DOWN); + + PIN_SLP(gpy0-0, INPUT, DOWN); + PIN_SLP(gpy0-1, INPUT, DOWN); + PIN_SLP(gpy0-2, INPUT, NONE); + PIN_SLP(gpy0-3, INPUT, NONE); + PIN_SLP(gpy0-4, INPUT, NONE); + PIN_SLP(gpy0-5, INPUT, NONE); + + PIN_SLP(gpy1-0, INPUT, DOWN); + PIN_SLP(gpy1-1, INPUT, DOWN); + PIN_SLP(gpy1-2, INPUT, DOWN); + PIN_SLP(gpy1-3, INPUT, DOWN); + + PIN_SLP(gpy2-0, PREV, NONE); + PIN_SLP(gpy2-1, INPUT, DOWN); + PIN_SLP(gpy2-2, INPUT, NONE); + PIN_SLP(gpy2-3, INPUT, NONE); + PIN_SLP(gpy2-4, INPUT, NONE); + PIN_SLP(gpy2-5, INPUT, NONE); + + PIN_SLP(gpy3-0, INPUT, DOWN); + PIN_SLP(gpy3-1, INPUT, DOWN); + PIN_SLP(gpy3-2, INPUT, DOWN); + PIN_SLP(gpy3-3, INPUT, DOWN); + PIN_SLP(gpy3-4, INPUT, DOWN); + PIN_SLP(gpy3-5, INPUT, DOWN); + PIN_SLP(gpy3-6, INPUT, DOWN); + PIN_SLP(gpy3-7, INPUT, DOWN); + + PIN_SLP(gpy4-0, INPUT, DOWN); + PIN_SLP(gpy4-1, INPUT, DOWN); + PIN_SLP(gpy4-2, INPUT, DOWN); + PIN_SLP(gpy4-3, INPUT, DOWN); + PIN_SLP(gpy4-4, INPUT, DOWN); + PIN_SLP(gpy4-5, INPUT, DOWN); + PIN_SLP(gpy4-6, INPUT, DOWN); + PIN_SLP(gpy4-7, INPUT, DOWN); + + PIN_SLP(gpy5-0, INPUT, DOWN); + PIN_SLP(gpy5-1, INPUT, DOWN); + PIN_SLP(gpy5-2, INPUT, DOWN); + PIN_SLP(gpy5-3, INPUT, DOWN); + PIN_SLP(gpy5-4, INPUT, DOWN); + PIN_SLP(gpy5-5, INPUT, DOWN); + PIN_SLP(gpy5-6, INPUT, DOWN); + PIN_SLP(gpy5-7, INPUT, DOWN); + + PIN_SLP(gpy6-0, INPUT, DOWN); + PIN_SLP(gpy6-1, INPUT, DOWN); + PIN_SLP(gpy6-2, INPUT, DOWN); + PIN_SLP(gpy6-3, INPUT, DOWN); + PIN_SLP(gpy6-4, INPUT, DOWN); + PIN_SLP(gpy6-5, INPUT, DOWN); + PIN_SLP(gpy6-6, INPUT, DOWN); + PIN_SLP(gpy6-7, INPUT, DOWN); + }; +}; + +&pinctrl_2 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep2>; + + sleep2: sleep-states { + PIN_SLP(gpz-0, INPUT, DOWN); + PIN_SLP(gpz-1, INPUT, DOWN); + PIN_SLP(gpz-2, INPUT, DOWN); + PIN_SLP(gpz-3, INPUT, DOWN); + PIN_SLP(gpz-4, INPUT, DOWN); + PIN_SLP(gpz-5, INPUT, DOWN); + PIN_SLP(gpz-6, INPUT, DOWN); + }; +}; + +&pinctrl_3 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep3>; + + sleep3: sleep-states { + PIN_SLP(gpv0-0, INPUT, DOWN); + PIN_SLP(gpv0-1, INPUT, DOWN); + PIN_SLP(gpv0-2, INPUT, DOWN); + PIN_SLP(gpv0-3, INPUT, DOWN); + PIN_SLP(gpv0-4, INPUT, DOWN); + PIN_SLP(gpv0-5, INPUT, DOWN); + PIN_SLP(gpv0-6, INPUT, DOWN); + PIN_SLP(gpv0-7, INPUT, DOWN); + + PIN_SLP(gpv1-0, INPUT, DOWN); + PIN_SLP(gpv1-1, INPUT, DOWN); + PIN_SLP(gpv1-2, INPUT, DOWN); + PIN_SLP(gpv1-3, INPUT, DOWN); + PIN_SLP(gpv1-4, INPUT, DOWN); + PIN_SLP(gpv1-5, INPUT, DOWN); + PIN_SLP(gpv1-6, INPUT, DOWN); + PIN_SLP(gpv1-7, INPUT, DOWN); + + PIN_SLP(gpv2-0, INPUT, DOWN); + PIN_SLP(gpv2-1, INPUT, DOWN); + PIN_SLP(gpv2-2, INPUT, DOWN); + PIN_SLP(gpv2-3, INPUT, DOWN); + PIN_SLP(gpv2-4, INPUT, DOWN); + PIN_SLP(gpv2-5, INPUT, DOWN); + PIN_SLP(gpv2-6, INPUT, DOWN); + PIN_SLP(gpv2-7, INPUT, DOWN); + + PIN_SLP(gpv3-0, INPUT, DOWN); + PIN_SLP(gpv3-1, INPUT, DOWN); + PIN_SLP(gpv3-2, INPUT, DOWN); + PIN_SLP(gpv3-3, INPUT, DOWN); + PIN_SLP(gpv3-4, INPUT, DOWN); + PIN_SLP(gpv3-5, INPUT, DOWN); + PIN_SLP(gpv3-6, INPUT, DOWN); + PIN_SLP(gpv3-7, INPUT, DOWN); + + PIN_SLP(gpv4-0, INPUT, DOWN); + PIN_SLP(gpv4-1, INPUT, DOWN); + }; +}; + +&pmu_system_controller { + assigned-clocks = <&pmu_system_controller 0>; + assigned-clock-parents = <&clock CLK_XUSBXTI>; +}; + +&rtc { + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; + status = "okay"; +}; + +&sdhci_2 { + bus-width = <4>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>; + pinctrl-names = "default"; + vmmc-supply = <&ldo21_reg>; + status = "okay"; +}; + +&sdhci_3 { + #address-cells = <1>; + #size-cells = <0>; + non-removable; + bus-width = <4>; + mmc-pwrseq = <&wlan_pwrseq>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_wifi>; + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake>; + interrupt-parent = <&gpx2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + +&serial_0 { + pinctrl-0 = <&uart0_data &uart0_fctl>; + pinctrl-names = "default"; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>; + pinctrl-names = "default"; + + max-speed = <2000000>; + shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + clocks = <&max77686 MAX77686_CLK_PMIC>; + clock-names = "lpo"; + }; +}; + +&serial_2 { + pinctrl-0 = <&uart_sel>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tmu { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index 49971203a8aa..cc99b955af0c 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -71,61 +71,61 @@ pinctrl-names = "default"; status = "okay"; - key_1 { + key-1 { keypad,row = <1>; keypad,column = <3>; linux,code = <2>; }; - key_2 { + key-2 { keypad,row = <1>; keypad,column = <4>; linux,code = <3>; }; - key_3 { + key-3 { keypad,row = <1>; keypad,column = <5>; linux,code = <4>; }; - key_4 { + key-4 { keypad,row = <1>; keypad,column = <6>; linux,code = <5>; }; - key_5 { + key-5 { keypad,row = <1>; keypad,column = <7>; linux,code = <6>; }; - key_A { + key-A { keypad,row = <2>; keypad,column = <6>; linux,code = <30>; }; - key_B { + key-B { keypad,row = <2>; keypad,column = <7>; linux,code = <48>; }; - key_C { + key-C { keypad,row = <0>; keypad,column = <5>; linux,code = <46>; }; - key_D { + key-D { keypad,row = <2>; keypad,column = <5>; linux,code = <32>; }; - key_E { + key-E { keypad,row = <0>; keypad,column = <7>; linux,code = <18>; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index e76881dc0014..a142fe84010b 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -274,7 +274,6 @@ clocks = <&clock CLK_TSADC>; clock-names = "adc"; #io-channel-cells = <1>; - io-channel-ranges; samsung,syscon-phandle = <&pmu_system_controller>; status = "disabled"; }; @@ -378,15 +377,17 @@ #iommu-cells = <0>; }; - bus_dmc: bus_dmc { + bus_dmc: bus-dmc { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DIV_DMC>; clock-names = "bus"; operating-points-v2 = <&bus_dmc_opp_table>; + samsung,data-clock-ratio = <4>; + #interconnect-cells = <0>; status = "disabled"; }; - bus_acp: bus_acp { + bus_acp: bus-acp { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DIV_ACP>; clock-names = "bus"; @@ -394,7 +395,7 @@ status = "disabled"; }; - bus_c2c: bus_c2c { + bus_c2c: bus-c2c { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DIV_C2C>; clock-names = "bus"; @@ -404,7 +405,6 @@ bus_dmc_opp_table: opp-table1 { compatible = "operating-points-v2"; - opp-shared; opp-100000000 { opp-hz = /bits/ 64 <100000000>; @@ -431,7 +431,6 @@ bus_acp_opp_table: opp-table2 { compatible = "operating-points-v2"; - opp-shared; opp-100000000 { opp-hz = /bits/ 64 <100000000>; @@ -447,15 +446,17 @@ }; }; - bus_leftbus: bus_leftbus { + bus_leftbus: bus-leftbus { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DIV_GDL>; clock-names = "bus"; operating-points-v2 = <&bus_leftbus_opp_table>; + interconnects = <&bus_dmc>; + #interconnect-cells = <0>; status = "disabled"; }; - bus_rightbus: bus_rightbus { + bus_rightbus: bus-rightbus { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DIV_GDR>; clock-names = "bus"; @@ -463,15 +464,17 @@ status = "disabled"; }; - bus_display: bus_display { + bus_display: bus-display { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_ACLK160>; clock-names = "bus"; operating-points-v2 = <&bus_display_opp_table>; + interconnects = <&bus_leftbus &bus_dmc>; + #interconnect-cells = <0>; status = "disabled"; }; - bus_fsys: bus_fsys { + bus_fsys: bus-fsys { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_ACLK133>; clock-names = "bus"; @@ -479,7 +482,7 @@ status = "disabled"; }; - bus_peri: bus_peri { + bus_peri: bus-peri { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_ACLK100>; clock-names = "bus"; @@ -487,7 +490,7 @@ status = "disabled"; }; - bus_mfc: bus_mfc { + bus_mfc: bus-mfc { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_SCLK_MFC>; clock-names = "bus"; @@ -497,7 +500,6 @@ bus_leftbus_opp_table: opp-table3 { compatible = "operating-points-v2"; - opp-shared; opp-100000000 { opp-hz = /bits/ 64 <100000000>; @@ -520,7 +522,6 @@ bus_display_opp_table: opp-table4 { compatible = "operating-points-v2"; - opp-shared; opp-160000000 { opp-hz = /bits/ 64 <160000000>; @@ -532,7 +533,6 @@ bus_fsys_opp_table: opp-table5 { compatible = "operating-points-v2"; - opp-shared; opp-100000000 { opp-hz = /bits/ 64 <100000000>; @@ -544,7 +544,6 @@ bus_peri_opp_table: opp-table6 { compatible = "operating-points-v2"; - opp-shared; opp-50000000 { opp-hz = /bits/ 64 <50000000>; @@ -773,6 +772,7 @@ clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; + interconnects = <&bus_display &bus_dmc>; }; &pmu { diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 79546f11af26..a161f6237c7f 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -27,7 +27,7 @@ stdout-path = "serial2:115200n8"; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; menu { @@ -211,7 +211,7 @@ samsung,i2c-max-bus-freq = <20000>; samsung,i2c-slave-addr = <0x66>; - s5m8767_pmic@66 { + pmic@66 { compatible = "samsung,s5m8767-pmic"; reg = <0x66>; interrupt-parent = <&gpx3>; @@ -511,7 +511,7 @@ &i2c_3 { status = "okay"; - wm1811: codec@1a { + wm1811: audio-codec@1a { compatible = "wlf,wm1811"; reg = <0x1a>; clocks = <&i2s0 CLK_I2S_CDCLK>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 186790f39e4d..8b5a79a8720c 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -290,7 +290,7 @@ reg = <0x51>; }; - wm8994: wm8994@1a { + wm8994: audio-codec@1a { compatible = "wlf,wm8994"; reg = <0x1a>; @@ -385,7 +385,7 @@ status = "okay"; cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>; - w25q80bw@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "w25x80"; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index c952a615148e..6635f6184051 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -217,7 +217,7 @@ }; }; - mmc3_pwrseq: mmc3_pwrseq { + mmc3_pwrseq: mmc3-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */ <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */ @@ -289,7 +289,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - max77686: max77686@9 { + max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; interrupts = <2 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts index 7cbfc6f1f4b8..0822b778c035 100644 --- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts +++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts @@ -32,7 +32,7 @@ }; &i2c_7 { - max98090: codec@10 { + max98090: audio-codec@10 { compatible = "maxim,max98090"; reg = <0x10>; interrupts = <4 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 75fdc5e6d423..9946dce54d74 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -30,7 +30,7 @@ }; &i2c_7 { - max98095: codec@11 { + max98095: audio-codec@11 { compatible = "maxim,max98095"; reg = <0x11>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index a92ade33779c..9d2baea62d0d 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -105,7 +105,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - s5m8767-pmic@66 { + pmic@66 { compatible = "samsung,s5m8767-pmic"; reg = <0x66>; interrupt-parent = <&gpx3>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index bd2d8835dd36..2ea2caaca4e2 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -70,7 +70,7 @@ }; }; - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table0 { compatible = "operating-points-v2"; opp-shared; @@ -635,8 +635,8 @@ #size-cells = <1>; ranges; - usbdrd_dwc3: dwc3@12000000 { - compatible = "synopsys,dwc3"; + usbdrd_dwc3: usb@12000000 { + compatible = "snps,dwc3"; reg = <0x12000000 0x10000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; @@ -844,7 +844,6 @@ clocks = <&clock CLK_ADC>; clock-names = "adc"; #io-channel-cells = <1>; - io-channel-ranges; samsung,syscon-phandle = <&pmu_system_controller>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index 75b4150c26d7..949c0721cdb4 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -19,6 +19,10 @@ model = "Hardkernel Odroid XU"; compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5"; + aliases { + ethernet = ðernet; + }; + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x7ea00000>; @@ -327,6 +331,8 @@ regulator-name = "vddq_lcd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + /* Supplies also GPK and GPJ */ + regulator-always-on; }; ldo8_reg: LDO8 { @@ -498,7 +504,7 @@ &i2c_1 { status = "okay"; - max98090: max98090@10 { + max98090: audio-codec@10 { compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpj3>; @@ -636,12 +642,22 @@ vtmu-supply = <&ldo10_reg>; }; +&usb3_0_oc { + /* External pull up */ + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; +}; + +&usb3_1_oc { + /* External pull up */ + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; +}; + &usbdrd_dwc3_0 { - dr_mode = "host"; + dr_mode = "peripheral"; }; &usbdrd_dwc3_1 { - dr_mode = "peripheral"; + dr_mode = "host"; }; &usbdrd3_0 { @@ -653,3 +669,14 @@ vdd33-supply = <&ldo12_reg>; vdd10-supply = <&ldo15_reg>; }; + +&usbhost2 { + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@2 { + compatible = "usb0424,9730"; + reg = <2>; + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ + }; +}; diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi index e5d0a2a4f648..d0aa18443a69 100644 --- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi @@ -560,6 +560,34 @@ interrupt-controller; #interrupt-cells = <2>; }; + + usb3_1_oc: usb3-1-oc { + samsung,pins = "gpk2-4", "gpk2-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + usb3_1_vbusctrl: usb3-1-vbusctrl { + samsung,pins = "gpk2-6", "gpk2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + usb3_0_oc: usb3-0-oc { + samsung,pins = "gpk3-0", "gpk3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + usb3_0_vbusctrl: usb3-0-vbusctrl { + samsung,pins = "gpk3-2", "gpk3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; }; &pinctrl_2 { diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 60a87684b1af..584ce62361b1 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -390,6 +390,8 @@ &usbdrd3_0 { clocks = <&clock CLK_USBD300>; clock-names = "usbdrd30"; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_0_oc>, <&usb3_0_vbusctrl>; }; &usbdrd_phy0 { @@ -401,6 +403,8 @@ &usbdrd3_1 { clocks = <&clock CLK_USBD301>; clock-names = "usbdrd30"; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_1_oc>, <&usb3_1_vbusctrl>; }; &usbdrd_dwc3_1 { diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index dd7f8385d81e..bf457d0c02eb 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -39,7 +39,7 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; wakeup { @@ -344,7 +344,7 @@ &hsi2c_4 { status = "okay"; - s2mps11_pmic@66 { + pmic@66 { compatible = "samsung,s2mps11-pmic"; reg = <0x66>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 2bcbdf8a39bf..315b3dc9c017 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -138,7 +138,7 @@ }; }; - mmc1_pwrseq: mmc1_pwrseq { + mmc1_pwrseq: mmc1-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */ clocks = <&max77802 MAX77802_CLK_32K_CP>; @@ -205,7 +205,7 @@ status = "okay"; clock-frequency = <400000>; - max77802: max77802-pmic@9 { + max77802: pmic@9 { compatible = "maxim,max77802"; interrupt-parent = <&gpx3>; interrupts = <1 IRQ_TYPE_NONE>; @@ -615,7 +615,7 @@ status = "okay"; clock-frequency = <400000>; - max98090: codec@10 { + max98090: audio-codec@10 { compatible = "maxim,max98090"; reg = <0x10>; interrupts = <2 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 4e49d8095b29..d506da9fa661 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -129,7 +129,7 @@ &hsi2c_4 { status = "okay"; - s2mps11_pmic@66 { + pmic@66 { compatible = "samsung,s2mps11-pmic"; reg = <0x66>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 83580f076a58..e23e8ffb093f 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -42,7 +42,7 @@ * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi. */ - cluster_a15_opp_table: opp_table0 { + cluster_a15_opp_table: opp-table0 { compatible = "operating-points-v2"; opp-shared; @@ -108,7 +108,7 @@ }; }; - cluster_a7_opp_table: opp_table1 { + cluster_a7_opp_table: opp-table1 { compatible = "operating-points-v2"; opp-shared; @@ -240,9 +240,6 @@ dmc: memory-controller@10c20000 { compatible = "samsung,exynos5422-dmc"; reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>; - interrupt-parent = <&combiner>; - interrupts = <16 0>, <16 1>; - interrupt-names = "drex_0", "drex_1"; clocks = <&clock CLK_FOUT_SPLL>, <&clock CLK_MOUT_SCLK_SPLL>, <&clock CLK_FF_DOUT_SPLL2>, @@ -1080,112 +1077,112 @@ #iommu-cells = <0>; }; - bus_wcore: bus_wcore { + bus_wcore: bus-wcore { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK400_WCORE>; clock-names = "bus"; status = "disabled"; }; - bus_noc: bus_noc { + bus_noc: bus-noc { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK100_NOC>; clock-names = "bus"; status = "disabled"; }; - bus_fsys_apb: bus_fsys_apb { + bus_fsys_apb: bus-fsys-apb { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_PCLK200_FSYS>; clock-names = "bus"; status = "disabled"; }; - bus_fsys: bus_fsys { + bus_fsys: bus-fsys { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK200_FSYS>; clock-names = "bus"; status = "disabled"; }; - bus_fsys2: bus_fsys2 { + bus_fsys2: bus-fsys2 { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK200_FSYS2>; clock-names = "bus"; status = "disabled"; }; - bus_mfc: bus_mfc { + bus_mfc: bus-mfc { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK333>; clock-names = "bus"; status = "disabled"; }; - bus_gen: bus_gen { + bus_gen: bus-gen { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK266>; clock-names = "bus"; status = "disabled"; }; - bus_peri: bus_peri { + bus_peri: bus-peri { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK66>; clock-names = "bus"; status = "disabled"; }; - bus_g2d: bus_g2d { + bus_g2d: bus-g2d { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK333_G2D>; clock-names = "bus"; status = "disabled"; }; - bus_g2d_acp: bus_g2d_acp { + bus_g2d_acp: bus-g2d-acp { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK266_G2D>; clock-names = "bus"; status = "disabled"; }; - bus_jpeg: bus_jpeg { + bus_jpeg: bus-jpeg { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK300_JPEG>; clock-names = "bus"; status = "disabled"; }; - bus_jpeg_apb: bus_jpeg_apb { + bus_jpeg_apb: bus-jpeg-apb { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK166>; clock-names = "bus"; status = "disabled"; }; - bus_disp1_fimd: bus_disp1_fimd { + bus_disp1_fimd: bus-disp1-fimd { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK300_DISP1>; clock-names = "bus"; status = "disabled"; }; - bus_disp1: bus_disp1 { + bus_disp1: bus-disp1 { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK400_DISP1>; clock-names = "bus"; status = "disabled"; }; - bus_gscl_scaler: bus_gscl_scaler { + bus_gscl_scaler: bus-gscl-scaler { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK300_GSCL>; clock-names = "bus"; status = "disabled"; }; - bus_mscl: bus_mscl { + bus_mscl: bus-mscl { compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK400_MSCL>; clock-names = "bus"; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index b1cf9414ce17..d0df560eb0db 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -35,7 +35,7 @@ }; }; - bus_wcore_opp_table: opp_table2 { + bus_wcore_opp_table: opp-table2 { compatible = "operating-points-v2"; /* derived from 532MHz MPLL */ @@ -61,7 +61,7 @@ }; }; - bus_noc_opp_table: opp_table3 { + bus_noc_opp_table: opp-table3 { compatible = "operating-points-v2"; /* derived from 666MHz CPLL */ @@ -79,7 +79,7 @@ }; }; - bus_fsys_apb_opp_table: opp_table4 { + bus_fsys_apb_opp_table: opp-table4 { compatible = "operating-points-v2"; /* derived from 666MHz CPLL */ @@ -91,7 +91,7 @@ }; }; - bus_fsys2_opp_table: opp_table5 { + bus_fsys2_opp_table: opp-table5 { compatible = "operating-points-v2"; /* derived from 600MHz DPLL */ @@ -106,7 +106,7 @@ }; }; - bus_mfc_opp_table: opp_table6 { + bus_mfc_opp_table: opp-table6 { compatible = "operating-points-v2"; /* derived from 666MHz CPLL */ @@ -127,7 +127,7 @@ }; }; - bus_gen_opp_table: opp_table7 { + bus_gen_opp_table: opp-table7 { compatible = "operating-points-v2"; /* derived from 532MHz MPLL */ @@ -145,7 +145,7 @@ }; }; - bus_peri_opp_table: opp_table8 { + bus_peri_opp_table: opp-table8 { compatible = "operating-points-v2"; /* derived from 666MHz CPLL */ @@ -154,7 +154,7 @@ }; }; - bus_g2d_opp_table: opp_table9 { + bus_g2d_opp_table: opp-table9 { compatible = "operating-points-v2"; /* derived from 666MHz CPLL */ @@ -175,7 +175,7 @@ }; }; - bus_g2d_acp_opp_table: opp_table10 { + bus_g2d_acp_opp_table: opp-table10 { compatible = "operating-points-v2"; /* derived from 532MHz MPLL */ @@ -193,7 +193,7 @@ }; }; - bus_jpeg_opp_table: opp_table11 { + bus_jpeg_opp_table: opp-table11 { compatible = "operating-points-v2"; /* derived from 600MHz DPLL */ @@ -211,7 +211,7 @@ }; }; - bus_jpeg_apb_opp_table: opp_table12 { + bus_jpeg_apb_opp_table: opp-table12 { compatible = "operating-points-v2"; /* derived from 666MHz CPLL */ @@ -229,7 +229,7 @@ }; }; - bus_disp1_fimd_opp_table: opp_table13 { + bus_disp1_fimd_opp_table: opp-table13 { compatible = "operating-points-v2"; /* derived from 600MHz DPLL */ @@ -241,7 +241,7 @@ }; }; - bus_disp1_opp_table: opp_table14 { + bus_disp1_opp_table: opp-table14 { compatible = "operating-points-v2"; /* derived from 600MHz DPLL */ @@ -256,7 +256,7 @@ }; }; - bus_gscl_opp_table: opp_table15 { + bus_gscl_opp_table: opp-table15 { compatible = "operating-points-v2"; /* derived from 600MHz DPLL */ @@ -271,7 +271,7 @@ }; }; - bus_mscl_opp_table: opp_table16 { + bus_mscl_opp_table: opp-table16 { compatible = "operating-points-v2"; /* derived from 666MHz CPLL */ @@ -292,7 +292,7 @@ }; }; - dmc_opp_table: opp_table17 { + dmc_opp_table: opp-table17 { compatible = "operating-points-v2"; opp00 { @@ -503,7 +503,7 @@ &hsi2c_4 { status = "okay"; - s2mps11_pmic@66 { + pmic@66 { compatible = "samsung,s2mps11-pmic"; reg = <0x66>; samsung,s2mps11-acokb-ground; diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts index 812659260278..20c222b33f98 100644 --- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts +++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts @@ -15,10 +15,10 @@ compatible = "hardkernel,odroid-hc1", "samsung,exynos5800", \ "samsung,exynos5"; - pwmleds { + led-controller { compatible = "pwm-leds"; - blueled { + led-1 { label = "blue:heartbeat"; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi index b5ec4f47eb3a..86b96f9706db 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -40,7 +40,7 @@ &hsi2c_5 { status = "okay"; - max98090: max98090@10 { + max98090: audio-codec@10 { compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpx3>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 5da2d81e3be2..e35af40a55cb 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -13,12 +13,12 @@ #include "exynos5422-odroid-core.dtsi" / { - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&power_key>; - power_key { + power-key { /* * The power button (SW2) is connected to the PWRON * pin (active high) of the S2MPS11 PMIC, which acts diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts index 98feecad5489..62c5928aa994 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -16,6 +16,10 @@ / { model = "Hardkernel Odroid XU3 Lite"; compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5"; + + aliases { + ethernet = ðernet; + }; }; &arm_a7_pmu { @@ -103,3 +107,21 @@ &usbdrd_dwc3_1 { dr_mode = "peripheral"; }; + +&usbhost2 { + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb0424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb0424,ec00"; + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index db0bc17a667b..cecaeb69e623 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -15,34 +15,38 @@ / { model = "Hardkernel Odroid XU3"; compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; + + aliases { + ethernet = ðernet; + }; }; &i2c_0 { status = "okay"; /* A15 cluster: VDD_ARM */ - ina231@40 { + power-sensor@40 { compatible = "ti,ina231"; reg = <0x40>; shunt-resistor = <10000>; }; /* memory: VDD_MEM */ - ina231@41 { + power-sensor@41 { compatible = "ti,ina231"; reg = <0x41>; shunt-resistor = <10000>; }; /* GPU: VDD_G3D */ - ina231@44 { + power-sensor@44 { compatible = "ti,ina231"; reg = <0x44>; shunt-resistor = <10000>; }; /* A7 cluster: VDD_KFC */ - ina231@45 { + power-sensor@45 { compatible = "ti,ina231"; reg = <0x45>; shunt-resistor = <10000>; @@ -70,3 +74,21 @@ &usbdrd_dwc3_1 { dr_mode = "peripheral"; }; + +&usbhost2 { + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb0424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb0424,ec00"; + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts index ddd55d3bcadd..ede782257643 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts @@ -17,10 +17,10 @@ compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \ "samsung,exynos5"; - pwmleds { + led-controller { compatible = "pwm-leds"; - blueled { + led-1 { label = "blue:heartbeat"; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi index 56acd832f0b3..2fc3e86dc5f7 100644 --- a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi +++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi @@ -11,10 +11,10 @@ #include <dt-bindings/gpio/gpio.h> / { - pwmleds { + led-controller-1 { compatible = "pwm-leds"; - greenled { + led-1 { label = "green:mmc0"; pwms = <&pwm 1 2000000 0>; pwm-names = "pwm1"; @@ -26,7 +26,7 @@ linux,default-trigger = "mmc0"; }; - blueled { + led-2 { label = "blue:heartbeat"; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; @@ -35,9 +35,10 @@ }; }; - gpioleds { + led-controller-2 { compatible = "gpio-leds"; - redled { + + led-3 { label = "red:microSD"; gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; default-state = "off"; diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index 8aa5117e58ce..fe9d34c23374 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -101,7 +101,6 @@ reg = <0x12d10000 0x100>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; #io-channel-cells = <1>; - io-channel-ranges; status = "disabled"; }; @@ -148,7 +147,7 @@ #size-cells = <1>; ranges; - usbdrd_dwc3_0: dwc3@12000000 { + usbdrd_dwc3_0: usb@12000000 { compatible = "snps,dwc3"; reg = <0x12000000 0x10000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; @@ -170,7 +169,7 @@ #size-cells = <1>; ranges; - usbdrd_dwc3_1: dwc3@12400000 { + usbdrd_dwc3_1: usb@12400000 { compatible = "snps,dwc3"; reg = <0x12400000 0x10000>; phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 60ab0effe474..0ce3443d39a8 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -138,7 +138,7 @@ }; }; - mmc1_pwrseq: mmc1_pwrseq { + mmc1_pwrseq: mmc1-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */ clocks = <&max77802 MAX77802_CLK_32K_CP>; @@ -214,7 +214,7 @@ status = "okay"; clock-frequency = <400000>; - max77802: max77802-pmic@9 { + max77802: pmic@9 { compatible = "maxim,max77802"; interrupt-parent = <&gpx3>; interrupts = <1 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/hi3519-demb.dts b/arch/arm/boot/dts/hi3519-demb.dts index 64f8ed126931..f473fa22e9ce 100644 --- a/arch/arm/boot/dts/hi3519-demb.dts +++ b/arch/arm/boot/dts/hi3519-demb.dts @@ -14,7 +14,7 @@ serial0 = &uart0; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi index 410409a0ed66..c524c854d319 100644 --- a/arch/arm/boot/dts/hi3519.dtsi +++ b/arch/arm/boot/dts/hi3519.dtsi @@ -52,8 +52,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x12100000 0x1000>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_UART0_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>; + clock-names = "uartclk", "apb_pclk"; status = "disable"; }; @@ -61,8 +61,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x12101000 0x1000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_UART1_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>; + clock-names = "uartclk", "apb_pclk"; status = "disable"; }; @@ -70,8 +70,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x12102000 0x1000>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_UART2_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>; + clock-names = "uartclk", "apb_pclk"; status = "disable"; }; @@ -79,8 +79,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x12103000 0x1000>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_UART3_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>; + clock-names = "uartclk", "apb_pclk"; status = "disable"; }; @@ -88,8 +88,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x12104000 0x1000>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_UART4_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>; + clock-names = "uartclk", "apb_pclk"; status = "disable"; }; @@ -127,8 +127,8 @@ compatible = "arm,pl022", "arm,primecell"; reg = <0x12120000 0x1000>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_SPI0_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_SPI0_CLK>, <&crg HI3519_SPI0_CLK>; + clock-names = "sspclk", "apb_pclk"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -139,8 +139,8 @@ compatible = "arm,pl022", "arm,primecell"; reg = <0x12121000 0x1000>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_SPI1_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_SPI1_CLK>, <&crg HI3519_SPI1_CLK>; + clock-names = "sspclk", "apb_pclk"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -151,8 +151,8 @@ compatible = "arm,pl022", "arm,primecell"; reg = <0x12122000 0x1000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HI3519_SPI2_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HI3519_SPI2_CLK>, <&crg HI3519_SPI2_CLK>; + clock-names = "sspclk", "apb_pclk"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts index 8c703c3f2fe0..ce356c469e1e 100644 --- a/arch/arm/boot/dts/hi3620-hi4511.dts +++ b/arch/arm/boot/dts/hi3620-hi4511.dts @@ -17,46 +17,46 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x20000000>; }; - amba { + amba-bus { dual_timer0: dual_timer@800000 { status = "ok"; }; - uart0: uart@b00000 { /* console */ - pinctrl-names = "default", "idle"; + uart0: serial@b00000 { /* console */ + pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>; pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>; status = "ok"; }; - uart1: uart@b01000 { /* modem */ - pinctrl-names = "default", "idle"; + uart1: serial@b01000 { /* modem */ + pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>; pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>; status = "ok"; }; - uart2: uart@b02000 { /* audience */ - pinctrl-names = "default", "idle"; + uart2: serial@b02000 { /* audience */ + pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>; status = "ok"; }; - uart3: uart@b03000 { - pinctrl-names = "default", "idle"; + uart3: serial@b03000 { + pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>; status = "ok"; }; - uart4: uart@b04000 { - pinctrl-names = "default", "idle"; + uart4: serial@b04000 { + pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>; status = "ok"; diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index f683440ee569..905900bf3e82 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -63,7 +63,7 @@ }; }; - amba { + amba-bus { #address-cells = <1>; #size-cells = <1>; @@ -172,48 +172,48 @@ interrupts = <1 13 0xf01>; }; - uart0: uart@b00000 { + uart0: serial@b00000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb00000 0x1000>; interrupts = <0 20 4>; - clocks = <&clock HI3620_UARTCLK0>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_UARTCLK0>, <&clock HI3620_UARTCLK0>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; - uart1: uart@b01000 { + uart1: serial@b01000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb01000 0x1000>; interrupts = <0 21 4>; - clocks = <&clock HI3620_UARTCLK1>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_UARTCLK1>, <&clock HI3620_UARTCLK1>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; - uart2: uart@b02000 { + uart2: serial@b02000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb02000 0x1000>; interrupts = <0 22 4>; - clocks = <&clock HI3620_UARTCLK2>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_UARTCLK2>, <&clock HI3620_UARTCLK2>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; - uart3: uart@b03000 { + uart3: serial@b03000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb03000 0x1000>; interrupts = <0 23 4>; - clocks = <&clock HI3620_UARTCLK3>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_UARTCLK3>, <&clock HI3620_UARTCLK3>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; - uart4: uart@b04000 { + uart4: serial@b04000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb04000 0x1000>; interrupts = <0 24 4>; - clocks = <&clock HI3620_UARTCLK4>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_UARTCLK4>, <&clock HI3620_UARTCLK4>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/hip01-ca9x2.dts b/arch/arm/boot/dts/hip01-ca9x2.dts index f05e74eacfe0..031476304d94 100644 --- a/arch/arm/boot/dts/hip01-ca9x2.dts +++ b/arch/arm/boot/dts/hip01-ca9x2.dts @@ -37,7 +37,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi index 975d39828405..2a7963605390 100644 --- a/arch/arm/boot/dts/hip01.dtsi +++ b/arch/arm/boot/dts/hip01.dtsi @@ -35,47 +35,47 @@ interrupt-parent = <&gic>; ranges = <0 0x10000000 0x20000000>; - amba { + amba-bus { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; ranges; - uart0: uart@10001000 { + uart0: serial@10001000 { compatible = "snps,dw-apb-uart"; reg = <0x10001000 0x1000>; - clocks = <&hisi_refclk144mhz>; - clock-names = "apb_pclk"; + clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; interrupts = <0 32 4>; status = "disabled"; }; - uart1: uart@10002000 { + uart1: serial@10002000 { compatible = "snps,dw-apb-uart"; reg = <0x10002000 0x1000>; - clocks = <&hisi_refclk144mhz>; - clock-names = "apb_pclk"; + clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; interrupts = <0 33 4>; status = "disabled"; }; - uart2: uart@10003000 { + uart2: serial@10003000 { compatible = "snps,dw-apb-uart"; reg = <0x10003000 0x1000>; - clocks = <&hisi_refclk144mhz>; - clock-names = "apb_pclk"; + clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; interrupts = <0 34 4>; status = "disabled"; }; - uart3: uart@10006000 { + uart3: serial@10006000 { compatible = "snps,dw-apb-uart"; reg = <0x10006000 0x1000>; - clocks = <&hisi_refclk144mhz>; - clock-names = "apb_pclk"; + clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; interrupts = <0 4 4>; status = "disabled"; diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts index 9019e0d2ef60..f5691dbc26d2 100644 --- a/arch/arm/boot/dts/hip04-d01.dts +++ b/arch/arm/boot/dts/hip04-d01.dts @@ -22,7 +22,7 @@ }; soc { - uart0: uart@4007000 { + uart0: serial@4007000 { status = "ok"; }; }; diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi index 555bc6b6720f..bccf5ba3d855 100644 --- a/arch/arm/boot/dts/hip04.dtsi +++ b/arch/arm/boot/dts/hip04.dtsi @@ -250,12 +250,12 @@ <0 79 4>; }; - uart0: uart@4007000 { + uart0: serial@4007000 { compatible = "snps,dw-apb-uart"; reg = <0x4007000 0x1000>; interrupts = <0 381 4>; - clocks = <&clk_168m>; - clock-names = "uartclk"; + clocks = <&clk_168m>, <&clk_168m>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts index d55e9cd3b12b..22b122d3f514 100644 --- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts +++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts @@ -35,7 +35,7 @@ }; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index e2dbf1d8a67b..97211385dc89 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -30,7 +30,7 @@ interrupt-parent = <&gic>; ranges = <0 0xf8000000 0x8000000>; - amba { + amba-bus { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -86,48 +86,48 @@ status = "disabled"; }; - uart0: uart@b00000 { + uart0: serial@b00000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x00b00000 0x1000>; interrupts = <0 49 4>; - clocks = <&clock HIX5HD2_FIXED_83M>; - clock-names = "apb_pclk"; + clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; - uart1: uart@6000 { + uart1: serial@6000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x00006000 0x1000>; interrupts = <0 50 4>; - clocks = <&clock HIX5HD2_FIXED_83M>; - clock-names = "apb_pclk"; + clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; - uart2: uart@b02000 { + uart2: serial@b02000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x00b02000 0x1000>; interrupts = <0 51 4>; - clocks = <&clock HIX5HD2_FIXED_83M>; - clock-names = "apb_pclk"; + clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; - uart3: uart@b03000 { + uart3: serial@b03000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x00b03000 0x1000>; interrupts = <0 52 4>; - clocks = <&clock HIX5HD2_FIXED_83M>; - clock-names = "apb_pclk"; + clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; - uart4: uart@b04000 { + uart4: serial@b04000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb04000 0x1000>; interrupts = <0 53 4>; - clocks = <&clock HIX5HD2_FIXED_83M>; - clock-names = "apb_pclk"; + clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; @@ -423,7 +423,7 @@ interrupts = <0 35 4>; clocks = <&clock HIX5HD2_MMC_CIU_RST>, <&clock HIX5HD2_MMC_BIU_CLK>; - clock-names = "ciu", "biu"; + clock-names = "biu", "ciu"; }; sd: mmc@1820000 { @@ -432,7 +432,7 @@ interrupts = <0 34 4>; clocks = <&clock HIX5HD2_SD_CIU_RST>, <&clock HIX5HD2_SD_BIU_CLK>; - clock-names = "ciu","biu"; + clock-names = "biu", "ciu"; }; gmac0: ethernet@1840000 { @@ -453,14 +453,14 @@ status = "disabled"; }; - usb0: ehci@1890000 { + usb0: usb@1890000 { compatible = "generic-ehci"; reg = <0x1890000 0x1000>; interrupts = <0 66 4>; clocks = <&clock HIX5HD2_USB_CLK>; }; - usb1: ohci@1880000 { + usb1: usb@1880000 { compatible = "generic-ohci"; reg = <0x1880000 0x1000>; interrupts = <0 67 4>; @@ -468,7 +468,7 @@ }; peripheral_ctrl: syscon@a20000 { - compatible = "syscon"; + compatible = "hisilicon,peri-subctrl", "syscon"; reg = <0xa20000 0x1000>; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 1ab19f1268f8..fdcca82c9986 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -525,7 +525,7 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin"; }; - wdog@53fdc000 { + watchdog@53fdc000 { compatible = "fsl,imx25-wdt", "fsl,imx21-wdt"; reg = <0x53fdc000 0x4000>; clocks = <&clks 126>; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 7bc132737a37..fd525c3b16fa 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -99,7 +99,7 @@ #dma-channels = <16>; }; - wdog: wdog@10002000 { + wdog: watchdog@10002000 { compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; reg = <0x10002000 0x1000>; interrupts = <27>; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 94dfbf5b3f34..bbe52150b165 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -1317,7 +1317,7 @@ status = "disabled"; }; - etn_switch: switch@800f8000 { + eth_switch: switch@800f8000 { reg = <0x800f8000 0x8000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 45333f7e10ea..948d2a543f8d 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -315,10 +315,11 @@ clock-names = "ref", "ipg"; }; - wdog: wdog@53fdc000 { + wdog: watchdog@53fdc000 { compatible = "fsl,imx31-wdt", "fsl,imx21-wdt"; reg = <0x53fdc000 0x4000>; clocks = <&clks 41>; + interrupts = <55>; }; pwm: pwm@53fe0000 { diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index aba16252faab..98ccc81ca6d9 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -294,7 +294,7 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin"; }; - wdog: wdog@53fdc000 { + wdog: watchdog@53fdc000 { compatible = "fsl,imx35-wdt", "fsl,imx21-wdt"; reg = <0x53fdc000 0x4000>; clocks = <&clks 74>; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index 878e89c20190..4ea5c23f181b 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -59,7 +59,7 @@ MX50_PAD_CSPI_MISO__CSPI_MISO 0x00 MX50_PAD_CSPI_MOSI__CSPI_MOSI 0x00 MX50_PAD_CSPI_SS0__GPIO4_11 0xc4 - MX50_PAD_ECSPI1_MOSI__CSPI_SS1 0xf4 + MX50_PAD_ECSPI1_MOSI__GPIO4_13 0x84 >; }; diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts index a0eaf869b913..97cfd970fe74 100644 --- a/arch/arm/boot/dts/imx50-kobo-aura.dts +++ b/arch/arm/boot/dts/imx50-kobo-aura.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "imx50.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Kobo Aura (N514)"; @@ -119,7 +120,14 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - /* TODO: ektf2132 touch controller at 0x15 */ + touchscreen@15 { + reg = <0x15>; + compatible = "elan,ektf2132"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + power-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&gpio5 13 IRQ_TYPE_EDGE_FALLING>; + }; }; &i2c2 { @@ -139,7 +147,7 @@ }; &iomuxc { - pinctrl_gpiokeys: gpiokeys { + pinctrl_gpiokeys: gpiokeysgrp { fsl,pins = < MX50_PAD_CSPI_MISO__GPIO4_10 0x0 MX50_PAD_SD2_D7__GPIO5_15 0x0 @@ -147,34 +155,34 @@ >; }; - pinctrl_i2c1: i2c1 { + pinctrl_i2c1: i2c1grp { fsl,pins = < MX50_PAD_I2C1_SCL__I2C1_SCL 0x400001fd MX50_PAD_I2C1_SDA__I2C1_SDA 0x400001fd >; }; - pinctrl_i2c2: i2c2 { + pinctrl_i2c2: i2c2grp { fsl,pins = < MX50_PAD_I2C2_SCL__I2C2_SCL 0x400001fd MX50_PAD_I2C2_SDA__I2C2_SDA 0x400001fd >; }; - pinctrl_i2c3: i2c3 { + pinctrl_i2c3: i2c3grp { fsl,pins = < MX50_PAD_I2C3_SCL__I2C3_SCL 0x400001fd MX50_PAD_I2C3_SDA__I2C3_SDA 0x400001fd >; }; - pinctrl_leds: leds { + pinctrl_leds: ledsgrp { fsl,pins = < MX50_PAD_PWM1__GPIO6_24 0x0 >; }; - pinctrl_sd1: sd1 { + pinctrl_sd1: sd1grp { fsl,pins = < MX50_PAD_SD1_CMD__ESDHC1_CMD 0x1e4 MX50_PAD_SD1_CLK__ESDHC1_CLK 0xd4 @@ -187,7 +195,7 @@ >; }; - pinctrl_sd2: sd2 { + pinctrl_sd2: sd2grp { fsl,pins = < MX50_PAD_SD2_CMD__ESDHC2_CMD 0x1e4 MX50_PAD_SD2_CLK__ESDHC2_CLK 0xd4 @@ -198,19 +206,19 @@ >; }; - pinctrl_sd2_reset: sd2-reset { + pinctrl_sd2_reset: sd2-resetgrp { fsl,pins = < MX50_PAD_ECSPI2_MOSI__GPIO4_17 0x0 >; }; - pinctrl_sd2_vmmc: sd2-vmmc { + pinctrl_sd2_vmmc: sd2-vmmcgrp { fsl,pins = < MX50_PAD_ECSPI1_SCLK__GPIO4_12 0x0 >; }; - pinctrl_sd3: sd3 { + pinctrl_sd3: sd3grp { fsl,pins = < MX50_PAD_SD3_CMD__ESDHC3_CMD 0x1e4 MX50_PAD_SD3_CLK__ESDHC3_CLK 0xd4 @@ -225,14 +233,21 @@ >; }; - pinctrl_uart2: uart2 { + pinctrl_ts: tsgrp { + fsl,pins = < + MX50_PAD_CSPI_MOSI__GPIO4_9 0x0 + MX50_PAD_SD2_D5__GPIO5_13 0x0 + >; + }; + + pinctrl_uart2: uart2grp { fsl,pins = < MX50_PAD_UART2_TXD__UART2_TXD_MUX 0x1e4 MX50_PAD_UART2_RXD__UART2_RXD_MUX 0x1e4 >; }; - pinctrl_usbphy: usbphy { + pinctrl_usbphy: usbphygrp { fsl,pins = < MX50_PAD_ECSPI2_SS0__GPIO4_19 0x0 >; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index b6b2e6af9b96..a969f335b240 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -267,7 +267,7 @@ <&iomuxc 20 140 11>; }; - wdog1: wdog@53f98000 { + wdog1: watchdog@53f98000 { compatible = "fsl,imx50-wdt", "fsl,imx21-wdt"; reg = <0x53f98000 0x4000>; interrupts = <58>; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index e559ab0c3645..ec8ca3ac2c1c 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -451,7 +451,7 @@ "", "", "", "", "", "", "", ""; - unused-sd3-wp-gpio { + unused-sd3-wp-hog { /* * See pinctrl_esdhc1 below for more details on this */ diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 985e1be03ad6..7ebb46ce9e36 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -370,14 +370,14 @@ status = "disabled"; }; - wdog1: wdog@73f98000 { + wdog1: watchdog@73f98000 { compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f98000 0x4000>; interrupts = <58>; clocks = <&clks IMX5_CLK_DUMMY>; }; - wdog2: wdog@73f9c000 { + wdog2: watchdog@73f9c000 { compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f9c000 0x4000>; interrupts = <59>; diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts index f7dcdf96e5c0..be040b6a02fa 100644 --- a/arch/arm/boot/dts/imx53-ppd.dts +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -176,36 +176,37 @@ power-supply = <®_3v3_lcd>; }; - leds-brightness { + led-controller-1 { compatible = "pwm-leds"; - alarm-brightness { + led-1 { + label = "alarm-brightness"; pwms = <&pwm1 0 100000>; max-brightness = <255>; }; }; - leds { + led-controller-2 { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_alarmled_pins>; - alarm1 { + led-2 { label = "alarm:red"; gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; }; - alarm2 { + led-3 { label = "alarm:yellow"; gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; }; - alarm3 { + led-4 { label = "alarm:blue"; gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; }; - alarm4 { + led-5 { label = "alarm:silenced"; gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>; }; @@ -589,7 +590,7 @@ touchscreen@4b { compatible = "atmel,maxtouch"; - reset-gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio5 19 GPIO_ACTIVE_LOW>; reg = <0x4b>; interrupt-parent = <&gpio5>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 500eeaa3a27c..000050aeeabe 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -427,14 +427,14 @@ status = "disabled"; }; - wdog1: wdog@53f98000 { + wdog1: watchdog@53f98000 { compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; reg = <0x53f98000 0x4000>; interrupts = <58>; clocks = <&clks IMX5_CLK_DUMMY>; }; - wdog2: wdog@53f9c000 { + wdog2: watchdog@53f9c000 { compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; reg = <0x53f9c000 0x4000>; interrupts = <59>; diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts new file mode 100644 index 000000000000..4329b372d8cb --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-alti6p.dts @@ -0,0 +1,564 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2016 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> +#include "imx6dl.dtsi" + +/ { + model = "Altesco I6P Board"; + compatible = "alt,alti6p", "fsl,imx6dl"; + + chosen { + stdout-path = &uart4; + }; + + clock_ksz8081: clock-ksz8081 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + i2c2-mux { + compatible = "i2c-mux"; + i2c-parent = <&i2c2>; + mux-controls = <&i2c_mux>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + i2c4-mux { + compatible = "i2c-mux"; + i2c-parent = <&i2c4>; + mux-controls = <&i2c_mux>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-debug0 { + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-debug1 { + function = LED_FUNCTION_SD; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + }; + }; + + i2c_mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2cmux>; + + mux-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>, + <&gpio5 11 GPIO_ACTIVE_HIGH>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_h1_vbus: regulator-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "h1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_otg_vbus: regulator-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "prti6q-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Line", "Line In Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "External Speaker", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + system-clock-frequency = <0>; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + bitclock-master; + frame-master; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + mux-ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN 0 + IMX_AUDMUX_V2_PTCR_TFSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TCSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TFSDIR 0 + IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + mux-pins3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) + 0 IMX_AUDMUX_V2_PDCR_TXRXEN + >; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_5v0>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clock_ksz8081>; + clock-names = "ipg", "ahb", "ptp"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ8081RNA PHY */ + rgmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "", "SD1_CD", "", "USB_H1_OC", "", "", "", "", + "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "ECSPI1_SS1", "", "USB_EXT1_OC", "USB_EXT1_PWR", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "ETH_RESET", "", "", "BUZZER", "ETH_INTRP", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "I2C_EN13", "I2C_EN24", "", "", "", "", + "", "", "", "", "", "AUDIO_RESET", "", "", + "", "", "", "", "", "", "", ""; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + ddc-i2c-bus = <&i2c1>; + status = "okay"; +}; + +/* DDC */ +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + sgtl5000: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0xa>; + #sound-dai-cells = <0>; + clocks = <&clks 201>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <®_3v3>; + VDDD-supply = <®_1v8>; + }; + + /* additional i2c devices are added automatically by the boot loader */ +}; + +&i2c2 { + clock-frequency = <50000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + /* external interface, device are configured from user space */ +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + temperature-sensor@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; +}; + +&i2c4 { + clock-frequency = <50000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&ssi1 { + #sound-dai-cells = <0>; + fsl,mode = "ac97-slave"; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_h1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + phy_type = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + phy_type = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + no-1-8-v; + disable-wp; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b000 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x3008 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x3008 + /* CS */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x3008 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + /* MX6QDL_ENET_PINGRP4 */ + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0 + /* nINTRP */ + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 + >; + }; + + pinctrl_hdmi: hdmigrp { + fsl,pins = < + /* NOTE: DDC is done via I2C2, so DON'T configure DDC + * pins for HDMI! + */ + MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS3__I2C4_SDA 0x4001f8b1 + MX6QDL_PAD_NANDF_WP_B__I2C4_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2cmux: i2cmuxgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0b0 + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b0b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x8 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1B058 + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1B058 + + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts index b16603f27dce..dfa6f64d43cc 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts @@ -46,7 +46,7 @@ / { model = "aristainetos2 i.MX6 Dual Lite Board 4"; - compatible = "fsl,imx6dl"; + compatible = "abb,aristainetos2-imx6dl-4", "fsl,imx6dl"; memory@10000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts index abb2a1b9ce08..5e15212eaf3a 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts @@ -46,7 +46,7 @@ / { model = "aristainetos2 i.MX6 Dual Lite Board 7"; - compatible = "fsl,imx6dl"; + compatible = "abb,aristainetos2-imx6dl-7", "fsl,imx6dl"; memory@10000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index 5c7e85300695..cc861a43eb58 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -10,7 +10,7 @@ / { model = "aristainetos i.MX6 Dual Lite Board 4"; - compatible = "fsl,imx6dl"; + compatible = "abb,aristainetos-imx6dl-4", "fsl,imx6dl"; backlight { compatible = "pwm-backlight"; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts index 4d58cb4436d9..b6cb78870cd5 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts @@ -10,7 +10,7 @@ / { model = "aristainetos i.MX6 Dual Lite Board 7"; - compatible = "fsl,imx6dl"; + compatible = "abb,aristainetos-imx6dl-7", "fsl,imx6dl"; memory@10000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 65359aece950..7da74e6f46d9 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -143,7 +143,7 @@ reg = <0x4a>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ - reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; /* SODIMM 30 */ + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 */ status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6dl-lanmcu.dts b/arch/arm/boot/dts/imx6dl-lanmcu.dts new file mode 100644 index 000000000000..6b6e6fcdea9c --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-lanmcu.dts @@ -0,0 +1,470 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2019 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "imx6dl.dtsi" + +/ { + model = "Van der Laan LANMCU"; + compatible = "vdl,lanmcu", "fsl,imx6dl"; + + chosen { + stdout-path = &uart4; + }; + + clock_ksz8081: clock-ksz8081 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000 0>; + brightness-levels = <0 1000>; + num-interpolated-steps = <20>; + default-brightness-level = <19>; + }; + + display { + compatible = "fsl,imx-parallel-display"; + pinctrl-0 = <&pinctrl_ipu1_disp>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + label = "debug0"; + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + panel { + compatible = "edt,etm0700g0bdh6"; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + + reg_otg_vbus: regulator-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_npd>; + reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; + }; + +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clock_ksz8081>; + clock-names = "ipg", "ahb", "ptp"; + phy-handle = <&rgmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ8081RNA PHY */ + rgmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio5 23 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "", "SD1_CD", "", "", "", "", "", "", + "DEBUG_0", "BL_PWM", "", "", "", "", "", "", + "", "", "", "", "", "", "", "ENET_LED_GREEN", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "TS_INT", "USB_OTG1_OC", "USB_OTG1_PWR", "", + "", "", "", "", "UART2_CTS", "", "UART3_CTS", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "ENET_RST", "ENET_INT", + "", "", "I2C1_SDA", "I2C1_SCL", "", "", "", ""; +}; + +&gpio6 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "WLAN_REG_ON", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio7 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "EMMC_RST", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + /* additional i2c devices are added automatically by the boot loader */ +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts_edt>; + interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <1792>; + touchscreen-size-y = <1024>; + + touchscreen-fuzz-x = <0>; + touchscreen-fuzz-y = <0>; + + /* Touch screen calibration */ + threshold = <50>; + gain = <5>; + offset = <10>; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display_in>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + linux,rs485-enabled-at-boot-time; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + phy_type = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + no-1-8-v; + disable-wp; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + non-removable; + mmc-pwrseq = <&usdhc2_wifi_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&iomuxc { + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000 + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + /* MX6QDL_ENET_PINGRP4 */ + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0 + /* nINTRP */ + MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ipu1_disp: ipudisp1grp { + fsl,pins = < + /* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */ + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x30 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x30 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x30 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x30 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x30 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x30 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x30 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x30 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x30 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x30 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x30 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x30 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x30 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x30 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x30 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x30 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x30 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x30 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x30 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x30 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x30 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x30 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8 + >; + }; + + pinctrl_ts_edt: ts1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x130b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x130b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_GPIO_1__SD1_CD_B 0x1b0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; + + pinctrl_wifi_npd: wifigrp { + fsl,pins = < + /* WL_REG_ON */ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x13069 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-pico-dwarf.dts b/arch/arm/boot/dts/imx6dl-pico-dwarf.dts index 659a8e8714ea..d85b15a8c127 100644 --- a/arch/arm/boot/dts/imx6dl-pico-dwarf.dts +++ b/arch/arm/boot/dts/imx6dl-pico-dwarf.dts @@ -13,5 +13,5 @@ / { model = "TechNexion PICO-IMX6 DualLite/Solo Board and Dwarf baseboard"; - compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; + compatible = "technexion,imx6dl-pico-dwarf", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/imx6dl-pico-hobbit.dts b/arch/arm/boot/dts/imx6dl-pico-hobbit.dts index d7403c5c4337..08fedcbcc91b 100644 --- a/arch/arm/boot/dts/imx6dl-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6dl-pico-hobbit.dts @@ -13,5 +13,5 @@ / { model = "TechNexion PICO-IMX6 DualLite/Solo Board and Hobbit baseboard"; - compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; + compatible = "technexion,imx6dl-pico-hobbit", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/imx6dl-pico-nymph.dts b/arch/arm/boot/dts/imx6dl-pico-nymph.dts index b282dbf953aa..32ccfc5d41ce 100644 --- a/arch/arm/boot/dts/imx6dl-pico-nymph.dts +++ b/arch/arm/boot/dts/imx6dl-pico-nymph.dts @@ -13,5 +13,5 @@ / { model = "TechNexion PICO-IMX6 DualLite/Solo Board and Nymph baseboard"; - compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; + compatible = "technexion,imx6dl-pico-nymph", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/imx6dl-pico-pi.dts b/arch/arm/boot/dts/imx6dl-pico-pi.dts index b7b1c07f96f3..4590e8ad9a91 100644 --- a/arch/arm/boot/dts/imx6dl-pico-pi.dts +++ b/arch/arm/boot/dts/imx6dl-pico-pi.dts @@ -13,5 +13,5 @@ / { model = "TechNexion PICO-IMX6 DualLite/Solo Board and PI baseboard"; - compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; + compatible = "technexion,imx6dl-pico-pi", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts index fab83abb6466..a0683b4aeca1 100644 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -140,7 +140,7 @@ reg = <0x4a>; interrupt-parent = <&gpio6>; interrupts = <10 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* SODIMM 13 */ + reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */ status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts index 1614b1ae501d..86e84781cf5d 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts @@ -145,7 +145,7 @@ reg = <0x4a>; interrupt-parent = <&gpio6>; interrupts = <10 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* SODIMM 13 */ + reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */ status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index fa9f98dd15ac..62e72773e53b 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -144,7 +144,7 @@ reg = <0x4a>; interrupt-parent = <&gpio6>; interrupts = <10 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* SODIMM 13 */ + reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */ status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts index 81cc346dd149..02aca1e28ce3 100644 --- a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts +++ b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts @@ -12,6 +12,17 @@ / { model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 10.1 Kit"; compatible = "engicam,imx6-icore", "fsl,imx6q"; + + panel { + compatible = "ampire,am-1280800n3tzqw-t00h"; + backlight = <&backlight_lvds>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; }; &ldb { @@ -22,18 +33,11 @@ fsl,data-width = <24>; status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <60000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <40>; - hfront-porch = <40>; - vback-porch = <10>; - vfront-porch = <3>; - hsync-len = <80>; - vsync-len = <10>; + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; diff --git a/arch/arm/boot/dts/imx6q-pico-dwarf.dts b/arch/arm/boot/dts/imx6q-pico-dwarf.dts index 618d2743e1e9..479a63ed42af 100644 --- a/arch/arm/boot/dts/imx6q-pico-dwarf.dts +++ b/arch/arm/boot/dts/imx6q-pico-dwarf.dts @@ -13,5 +13,5 @@ / { model = "TechNexion PICO-IMX6 Quad Board and Dwarf baseboard"; - compatible = "technexion,imx6q-pico", "fsl,imx6q"; + compatible = "technexion,imx6q-pico-dwarf", "fsl,imx6q"; }; diff --git a/arch/arm/boot/dts/imx6q-pico-hobbit.dts b/arch/arm/boot/dts/imx6q-pico-hobbit.dts index 7a666507b456..b767131068f5 100644 --- a/arch/arm/boot/dts/imx6q-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6q-pico-hobbit.dts @@ -13,5 +13,5 @@ / { model = "TechNexion PICO-IMX6 Quad Board and Hobbit baseboard"; - compatible = "technexion,imx6q-pico", "fsl,imx6q"; + compatible = "technexion,imx6q-pico-hobbit", "fsl,imx6q"; }; diff --git a/arch/arm/boot/dts/imx6q-pico-nymph.dts b/arch/arm/boot/dts/imx6q-pico-nymph.dts index fe5a7becc9e5..e8ad4c12b263 100644 --- a/arch/arm/boot/dts/imx6q-pico-nymph.dts +++ b/arch/arm/boot/dts/imx6q-pico-nymph.dts @@ -13,5 +13,5 @@ / { model = "TechNexion PICO-IMX6 Quad Board and Nymph baseboard"; - compatible = "technexion,imx6q-pico", "fsl,imx6q"; + compatible = "technexion,imx6q-pico-nymph", "fsl,imx6q"; }; diff --git a/arch/arm/boot/dts/imx6q-pico-pi.dts b/arch/arm/boot/dts/imx6q-pico-pi.dts index 9413f0a68f54..cc2394ddad6c 100644 --- a/arch/arm/boot/dts/imx6q-pico-pi.dts +++ b/arch/arm/boot/dts/imx6q-pico-pi.dts @@ -13,5 +13,5 @@ / { model = "TechNexion PICO-IMX6 Quad Board and PI baseboard"; - compatible = "technexion,imx6q-pico", "fsl,imx6q"; + compatible = "technexion,imx6q-pico-pi", "fsl,imx6q"; }; diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts index d112b50f8c5d..b4605edfd2ab 100644 --- a/arch/arm/boot/dts/imx6q-prti6q.dts +++ b/arch/arm/boot/dts/imx6q-prti6q.dts @@ -213,8 +213,8 @@ #size-cells = <0>; /* Microchip KSZ9031RNX PHY */ - rgmii_phy: ethernet-phy@4 { - reg = <4>; + rgmii_phy: ethernet-phy@0 { + reg = <0>; interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 67042793b0ca..1e530d892b76 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -55,12 +55,12 @@ pinctrl-0 = <&pinctrl_cubox_i_ir>; }; - pwmleds { + led-controller { compatible = "pwm-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_pwm1>; - front { + led-1 { active-low; label = "imx6:red:front"; max-brightness = <248>; diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index 265f5f3dbff6..d6df598bd1c2 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -390,21 +390,21 @@ /* I2C_GP */ &i2c1 { - clock-frequency = <100000>; + clock-frequency = <375000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; }; /* HDMI_CTRL */ &i2c2 { - clock-frequency = <100000>; + clock-frequency = <375000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; }; /* I2C_PM */ &i2c3 { - clock-frequency = <100000>; + clock-frequency = <375000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; @@ -551,7 +551,7 @@ pinctrl_i2c3: i2c3grp { fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index e361df26a168..7a1e53195785 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -116,7 +116,8 @@ status = "okay"; som_eeprom: eeprom@50 { - compatible = "atmel,24c32"; + compatible = "catalyst,24c32", "atmel,24c32"; + pagesize = <32>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi index 41ebe4599e43..a80aa08a37cb 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi @@ -84,7 +84,8 @@ status = "okay"; eeprom@50 { - compatible = "atmel,24c32"; + compatible = "st,24c32", "atmel,24c32"; + pagesize = <32>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 828dd20cd27d..d07d8f83456d 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -98,7 +98,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi index 93909796885a..b9b698f72b26 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi @@ -166,7 +166,6 @@ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 66b15748e287..c0a76202e16b 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -330,28 +330,28 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio3_hog>; - usb-emulation { + usb-emulation-hog { gpio-hog; gpios = <19 GPIO_ACTIVE_HIGH>; output-low; line-name = "usb-emulation"; }; - usb-mode1 { + usb-mode1-hog { gpio-hog; gpios = <20 GPIO_ACTIVE_HIGH>; output-high; line-name = "usb-mode1"; }; - usb-pwr { + usb-pwr-hog { gpio-hog; gpios = <22 GPIO_ACTIVE_LOW>; output-high; line-name = "usb-pwr-ctrl-en-n"; }; - usb-mode2 { + usb-mode2-hog { gpio-hog; gpios = <23 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 7a8837cbe21b..6f59a99cbe82 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -45,6 +45,10 @@ spi1 = &ecspi2; spi2 = &ecspi3; spi3 = &ecspi4; + usb0 = &usbotg; + usb1 = &usbh1; + usb2 = &usbh2; + usb3 = &usbh3; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; @@ -542,25 +546,25 @@ status = "disabled"; }; - can1: flexcan@2090000 { + can1: can@2090000 { compatible = "fsl,imx6q-flexcan"; reg = <0x02090000 0x4000>; interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_CAN1_IPG>, <&clks IMX6QDL_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x34 28 0x10 17>; + fsl,stop-mode = <&gpr 0x34 28>; status = "disabled"; }; - can2: flexcan@2094000 { + can2: can@2094000 { compatible = "fsl,imx6q-flexcan"; reg = <0x02094000 0x4000>; interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_CAN2_IPG>, <&clks IMX6QDL_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x34 29 0x10 18>; + fsl,stop-mode = <&gpr 0x34 29>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qp-prtwd3.dts b/arch/arm/boot/dts/imx6qp-prtwd3.dts new file mode 100644 index 000000000000..c42723989bc0 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-prtwd3.dts @@ -0,0 +1,553 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2018 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include "imx6qp.dtsi" + +/ { + model = "Protonic WD3 board"; + compatible = "prt,prtwd3", "fsl,imx6qp"; + + chosen { + stdout-path = &uart4; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + clock_ksz8081: clock-ksz8081 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + clock_ksz9031: clock-ksz9031 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + clock_mcp251xfd: clock-mcp251xfd { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + }; + + clock_sja1105: clock-sja1105 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + mdio { + compatible = "virtual,mdio-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio>; + + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpio5 6 GPIO_ACTIVE_HIGH + &gpio5 7 GPIO_ACTIVE_HIGH>; + + /* Microchip KSZ8081 */ + usbeth_phy: ethernet-phy@3 { + reg = <0x3>; + + interrupts-extended = <&gpio5 12 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + reset-assert-us = <500>; + reset-deassert-us = <1000>; + clocks = <&clock_ksz8081>; + clock-names = "rmii-ref"; + micrel,led-mode = <0>; + }; + + tja1102_phy0: ethernet-phy@4 { + reg = <0x4>; + + interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <20>; + reset-deassert-us = <2000>; + #address-cells = <1>; + #size-cells = <0>; + + tja1102_phy1: ethernet-phy@5 { + reg = <0x5>; + + interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>; + }; + }; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_otg_vbus: regulator-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_npd>; + reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_5v0>; + status = "okay"; +}; + +&ecspi2 { + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; + + switch@0 { + compatible = "nxp,sja1105q"; + reg = <0>; + spi-max-frequency = <4000000>; + spi-rx-delay-us = <1>; + spi-tx-delay-us = <1>; + spi-cpha; + + reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; + + clocks = <&clock_sja1105>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "usb"; + phy-handle = <&usbeth_phy>; + phy-mode = "rmii"; + }; + + port@1 { + reg = <1>; + label = "t1slave"; + phy-handle = <&tja1102_phy1>; + phy-mode = "rmii"; + }; + + port@2 { + reg = <2>; + label = "t1master"; + phy-handle = <&tja1102_phy0>; + phy-mode = "rmii"; + + }; + + port@3 { + reg = <3>; + label = "rj45"; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii-id"; + }; + + port@4 { + reg = <4>; + label = "cpu"; + ethernet = <&fec>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; +}; + +&ecspi3 { + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; + + can@0 { + compatible = "microchip,mcp251xfd"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + reg = <0>; + clocks = <&clock_mcp251xfd>; + spi-max-frequency = <10000000>; + interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + status = "okay"; + + phy-mode = "rgmii"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ9031 */ + rgmii_phy: ethernet-phy@2 { + reg = <2>; + + interrupts-extended = <&gpio1 28 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <1000>; + + clocks = <&clock_ksz9031>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "", "SD1_CD", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "PHY3_RESET", "", "", "PHY3_INT", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "BOARD_ID3", + "BOARD_ID0", "BOARD_ID1", "BOARD_ID2", + "", "", "", "", "", "", "", "", + "", "", "ECSPI2_SS0", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "USB_OTG_OC", "USB_OTG_PWR", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "CAN1_SR", "CAN2_SR", "", "", + "", "", "", "", "", "", "", "", + "ECSPI3_SS0", "CANFD_INT", "USB_ETH_RESET", "", "", "", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "SW_RESET", "", "", + "PHY12_INT", "PHY12_RESET", "PHY12_EN", "PHY0_RESET", + "PHY0_INT", "", "", "", + "", "", "DISP1_EN", "DISP1_LR", "DISP1_TS_IRQ", "LVDS1_PD", + "", "", + "", "LVDS1_INT", "", "", "DISP0_LR", "DISP0_TS_IRQ", + "DISP0_EN", "CAM_GPIO0"; +}; + +&gpio6 { + gpio-line-names = + "LVDS0_INT", "LVDS0_PD", "CAM_INT", "CAM_GPIO1", "CAM_PD", + "CAM_LOCK", "", "POWER_TG", + "POWER_VSEL", "", "WLAN_REG_ON", "USB_ETH_CHG", "", "", + "USB_ETH_CHG_ID0", "USB_ETH_CHG_ID1", + "USB_ETH_CHG_ID2", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + /* additional i2c devices are added automatically by the boot loader */ +}; + +&i2c3 { + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* VIN */ + channel@4 { + reg = <4>; + ti,gain = <1>; + ti,datarate = <3>; + }; + + /* VBUS */ + channel@5 { + reg = <5>; + ti,gain = <1>; + ti,datarate = <3>; + }; + + /* ICHG */ + channel@6 { + reg = <6>; + ti,gain = <1>; + ti,datarate = <3>; + }; + + channel@7 { + reg = <7>; + ti,gain = <1>; + ti,datarate = <3>; + }; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + phy_type = "utmi"; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbphynop1 { + status = "disabled"; +}; + +&usbphynop2 { + status = "disabled"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + no-1-8-v; + disable-wp; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + non-removable; + mmc-pwrseq = <&usdhc2_wifi_pwrseq>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&iomuxc { + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + /* CAN2_nINT */ + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b1 + /* CAN2_SR */ + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13070 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + /* CS */ + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 + + /* Configure clock provider for RGMII ref clock */ + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0 + /* Configure clock consumer for RGMII ref clock */ + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 + + /* SJA1105Q switch reset */ + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x10030 + + /* phy3/rgmii_phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x10030 + /* phy3/rgmii_phy int */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x40010000 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_mdio: mdiogrp { + fsl,pins = < + /* phy0/usbeth_phy reset */ + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x10030 + /* phy0/usbeth_phy int */ + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 + + /* phy12/tja1102_phy0 reset */ + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x10030 + /* phy12/tja1102_phy0 int */ + MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x100b1 + /* phy12/tja1102_phy0 enable. Set 100K pull-up */ + MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1f030 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; + + pinctrl_wifi_npd: wifinpd { + fsl,pins = < + /* WL_REG_ON */ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x13069 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts index 408da704c459..9d7c8884892a 100644 --- a/arch/arm/boot/dts/imx6sl-warp.dts +++ b/arch/arm/boot/dts/imx6sl-warp.dts @@ -51,8 +51,8 @@ #include "imx6sl.dtsi" / { - model = "WaRP Board"; - compatible = "warp,imx6sl-warp", "fsl,imx6sl"; + model = "Revotics WaRP Board"; + compatible = "revotics,imx6sl-warp", "fsl,imx6sl"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 91a8c54d5e11..997b96c1c47b 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -39,6 +39,9 @@ spi1 = &ecspi2; spi2 = &ecspi3; spi3 = &ecspi4; + usb0 = &usbotg1; + usb1 = &usbotg2; + usb2 = &usbh; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index 0b622201a1f3..04f8d637a501 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -36,6 +36,8 @@ spi1 = &ecspi2; spi3 = &ecspi3; spi4 = &ecspi4; + usb0 = &usbotg1; + usb1 = &usbotg2; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts index 5547916870c7..b9a1401e6c6d 100644 --- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts +++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts @@ -40,22 +40,22 @@ regulator-max-microvolt = <3300000>; }; - pwmleds { + led-controller { compatible = "pwm-leds"; - red { + led-1 { label = "red"; max-brightness = <255>; pwms = <&pwm6 0 50000>; }; - green { + led-2 { label = "green"; max-brightness = <255>; pwms = <&pwm2 0 50000>; }; - blue { + led-3 { label = "blue"; max-brightness = <255>; pwms = <&pwm1 0 50000>; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index dfdca1804f9f..8516730778df 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -49,6 +49,9 @@ spi2 = &ecspi3; spi3 = &ecspi4; spi4 = &ecspi5; + usb0 = &usbotg1; + usb1 = &usbotg2; + usb2 = &usbh; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; @@ -463,7 +466,7 @@ clocks = <&clks IMX6SX_CLK_CAN1_IPG>, <&clks IMX6SX_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 1 0x10 17>; + fsl,stop-mode = <&gpr 0x10 1>; status = "disabled"; }; @@ -474,7 +477,7 @@ clocks = <&clks IMX6SX_CLK_CAN2_IPG>, <&clks IMX6SX_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 2 0x10 18>; + fsl,stop-mode = <&gpr 0x10 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts index a0bbec57ddc7..3ec042bfccba 100644 --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts @@ -110,7 +110,7 @@ }; &gpio5 { - emmc-usd-mux { + emmc-usd-mux-hog { gpio-hog; gpios = <1 GPIO_ACTIVE_LOW>; output-high; diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi index 88f631c8fabb..19a062635ff6 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi @@ -75,6 +75,7 @@ eeprom@52 { compatible = "catalyst,24c32", "atmel,24c32"; + pagesize = <32>; reg = <0x52>; }; }; diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts new file mode 100644 index 000000000000..cfc744f8fcad --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (C) 2020 PHYTEC Messtechnik GmbH + * Author: Yunus Bas <y.bas@phytec.de> + */ + +/dts-v1/; +#include "imx6ul.dtsi" +#include "imx6ul-phytec-phycore-som.dtsi" +#include "imx6ul-phytec-segin.dtsi" +#include "imx6ul-phytec-segin-peb-eval-01.dtsi" +#include "imx6ul-phytec-segin-peb-av-02.dtsi" + +/ { + model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with eMMC"; + compatible = "phytec,imx6ul-pbacd10-emmc", "phytec,imx6ul-pbacd10", + "phytec,imx6ul-pcl063","fsl,imx6ul"; +}; + +&adc1 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&ecspi3 { + status = "okay"; +}; + +ðphy1 { + status = "okay"; +}; + +ðphy2 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&fec2 { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +®_can1_en { + status = "okay"; +}; + +®_sound_1v8 { + status = "okay"; +}; + +®_sound_3v3 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; + +&sound { + status = "okay"; +}; + +&tlv320 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usbotg2 { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; + +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts index 699dfcbf9a60..bff98e676980 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts @@ -9,6 +9,7 @@ #include "imx6ul-phytec-phycore-som.dtsi" #include "imx6ul-phytec-segin.dtsi" #include "imx6ul-phytec-segin-peb-eval-01.dtsi" +#include "imx6ul-phytec-segin-peb-av-02.dtsi" / { model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND"; diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi new file mode 100644 index 000000000000..7cda6944501d --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (C) 2016, 2020 PHYTEC Messtechnik + * Author: Christian Hemp <c.hemp@phytec.de> + * Author: Stefan Riedmueller <s.riedmueller@phytec.de> + */ + +/ { + backlight_lcd: backlight-lcd { + compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <5>; + power-supply = <®_backlight_en>; + pwms = <&pwm3 0 5000000>; + status = "disabled"; + }; + + lcd_panel: lcd-panel { + compatible = "edt,etm0700g0edh6"; + backlight = <&backlight_lcd>; + status = "disabled"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcdif_parallel_out>; + }; + }; + }; + + reg_backlight_en: regulator-backlight-en { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight_en>; + regulator-name = "backlight-lcd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&i2c1 { + edt_ft5406: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_edt_ft5406>; + interrupt-parent = <&gpio5>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + status = "disabled"; + }; + + stmpe: touchscreen@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_stmpe>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio5>; + wakeup-source; + status = "disabled"; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <1>; + st,touch-det-delay = <2>; + st,settling = <2>; + st,fraction-z = <7>; + st,i-drive = <1>; + touchscreen-inverted-x = <1>; + touchscreen-inverted-y = <1>; + }; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat>; + status = "disabled"; + + port { + lcdif_parallel_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; +}; + +&pwm3 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "disabled"; +}; + +&iomuxc { + pinctrl_edt_ft5406: edtft5406grp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 + >; + }; + + pinctrl_backlight_en: bachlightengrp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x59 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x59 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x59 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x59 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x59 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x59 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x59 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x59 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x59 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x59 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x59 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x59 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x59 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x59 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x59 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x59 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x59 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x59 + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x59 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x59 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x59 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x59 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0 + >; + }; + + pinctrl_stmpe: stmpegrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi index f1513e676c2f..95e4080dd0a6 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi @@ -130,31 +130,6 @@ status = "disabled"; }; - stmpe: touchscreen@44 { - compatible = "st,stmpe811"; - reg = <0x44>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - interrupt-parent = <&gpio5>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_stmpe>; - status = "disabled"; - - touchscreen { - compatible = "st,stmpe-ts"; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <1>; - st,ave-ctrl = <1>; - st,touch-det-delay = <2>; - st,settling = <2>; - st,fraction-z = <7>; - st,i-drive = <1>; - touchscreen-inverted-x = <1>; - touchscreen-inverted-y = <1>; - }; - }; - i2c_rtc: rtc@68 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rtc_int>; @@ -176,12 +151,6 @@ }; }; -&pwm3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm3>; - status = "disabled"; -}; - &sai2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai2>; @@ -267,12 +236,6 @@ >; }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0 - >; - }; - pinctrl_rtc_int: rtcintgrp { fsl,pins = < MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059 @@ -289,12 +252,6 @@ >; }; - pinctrl_stmpe: stmpegrp { - fsl,pins = < - MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 - >; - }; - pinctrl_uart5: uart5grp { fsl,pins = < MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index d7d9f3e46b92..9d3411cc597b 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -47,6 +47,8 @@ spi1 = &ecspi2; spi2 = &ecspi3; spi3 = &ecspi4; + usb0 = &usbotg1; + usb1 = &usbotg2; usbphy0 = &usbphy1; usbphy1 = &usbphy2; }; @@ -423,25 +425,25 @@ status = "disabled"; }; - can1: flexcan@2090000 { + can1: can@2090000 { compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; reg = <0x02090000 0x4000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_CAN1_IPG>, <&clks IMX6UL_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 1 0x10 17>; + fsl,stop-mode = <&gpr 0x10 1>; status = "disabled"; }; - can2: flexcan@2094000 { + can2: can@2094000 { compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; reg = <0x02094000 0x4000>; interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_CAN2_IPG>, <&clks IMX6UL_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 2 0x10 18>; + fsl,stop-mode = <&gpr 0x10 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts index 9648d4ecaf58..8e2a4c5d7765 100644 --- a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts @@ -9,6 +9,7 @@ #include "imx6ull-phytec-phycore-som.dtsi" #include "imx6ull-phytec-segin.dtsi" #include "imx6ull-phytec-segin-peb-eval-01.dtsi" +#include "imx6ull-phytec-segin-peb-av-02.dtsi" / { model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC"; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts index 656baf846453..c8d3eff9ed4b 100644 --- a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts @@ -9,6 +9,7 @@ #include "imx6ull-phytec-phycore-som.dtsi" #include "imx6ull-phytec-segin.dtsi" #include "imx6ull-phytec-segin-peb-eval-01.dtsi" +#include "imx6ull-phytec-segin-peb-av-02.dtsi" / { model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with NAND"; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi new file mode 100644 index 000000000000..06bb7f327780 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (C) 2018 PHYTEC Messtechnik GmbH + * Author: Stefan Riedmueller <s.riedmueller@phytec.de> + */ + +#include "imx6ul-phytec-segin-peb-av-02.dtsi" + +&iomuxc { + /delete-node/ edtft5406grp; + /delete-node/ stmpegrp; +}; + +&iomuxc_snvs { + pinctrl_edt_ft5406: edtft5406grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 + >; + }; + + pinctrl_stmpe: stmpegrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi index c1595fc785f7..e287a0453b5f 100644 --- a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi +++ b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi @@ -14,7 +14,6 @@ &iomuxc { /delete-node/ flexcan1engrp; /delete-node/ rtcintgrp; - /delete-node/ stmpegrp; }; &iomuxc_snvs { @@ -29,10 +28,4 @@ MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059 >; }; - - pinctrl_stmpe: stmpegrp { - fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 - >; - }; }; diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi index 9fa701bec2ec..139188eb9f40 100644 --- a/arch/arm/boot/dts/imx7-colibri-aster.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-aster.dtsi @@ -99,7 +99,7 @@ reg = <0x4a>; interrupt-parent = <&gpio2>; interrupts = <15 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 */ - reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* SODIMM 106 */ + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* SODIMM 106 */ }; /* M41T0M6 real time clock on carrier board */ diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi index 97601375f264..3caf450735d7 100644 --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -124,7 +124,7 @@ reg = <0x4a>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ - reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; /* SODIMM 30 */ + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 */ status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi index 50abf18ad30b..c6d1c63f7905 100644 --- a/arch/arm/boot/dts/imx7-mba7.dtsi +++ b/arch/arm/boot/dts/imx7-mba7.dtsi @@ -14,6 +14,12 @@ #include <dt-bindings/net/ti-dp83867.h> / { + aliases { + mmc0 = &usdhc3; + mmc1 = &usdhc1; + /delete-property/ mmc2; + }; + beeper { compatible = "gpio-beeper"; gpios = <&pca9555 0 GPIO_ACTIVE_HIGH>; @@ -164,6 +170,20 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "imx-audio-tlv320aic32x4"; + ssi-controller = <&sai1>; + audio-codec = <&tlv320aic32x4>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; + }; }; &adc1 { @@ -179,7 +199,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - num-chipselects = <3>; cs-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>, <&gpio4 1 GPIO_ACTIVE_LOW>, <&gpio4 2 GPIO_ACTIVE_LOW>; status = "okay"; @@ -188,7 +207,6 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - num-chipselects = <1>; status = "okay"; }; @@ -214,10 +232,7 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - /* LED1: Link/Activity, LED2: Error */ - ti,led-function = <0x0db0>; - /* Active low, LED1 and LED2 driven by phy */ - ti,led-ctrl = <0x1001>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; }; }; }; @@ -362,13 +377,25 @@ >; }; - pinctrl_pca9555: pca95550grp { fsl,pins = < MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x78 >; }; + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x11 + MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK 0x1c + MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1c + MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC 0x1c + + MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x1c + MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0x14 + MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x14 + >; + }; + pinctrl_uart3: uart3grp { fsl,pins = < MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x7e @@ -472,6 +499,12 @@ MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x59 >; }; + + pinctrl_wdog1: wdog1grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x30 + >; + }; }; &pwm1 { @@ -480,6 +513,16 @@ status = "okay"; }; +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, + <&clks IMX7D_SAI1_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <36864000>; + status = "okay"; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; @@ -518,6 +561,9 @@ assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; uart-has-rtscts; + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; status = "okay"; }; @@ -532,7 +578,8 @@ srp-disable; hnp-disable; adp-disable; - dr_mode = "host"; + over-current-active-low; + dr_mode = "otg"; status = "okay"; }; @@ -548,3 +595,9 @@ no-1-8-v; status = "okay"; }; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; +}; diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts b/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts new file mode 100644 index 000000000000..a6d68165fb1e --- /dev/null +++ b/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for Kamstrup OMNIA Flex Concentrator in + * manufacturing/debugging mode. + * + * Copyright (C) 2020 Kamstrup A/S + * Author: Bruno Thomsen <bruno.thomsen@gmail.com> + */ + +/dts-v1/; + +#include "imx7d-flex-concentrator.dts" + +/ { + model = "Kamstrup OMNIA Flex Concentrator - Manufacturing"; + compatible = "kam,imx7d-flex-concentrator-mfg", "fsl,imx7d"; + + chosen { + stdout-path = &uart4; + }; +}; + +&uart4 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/imx7d-flex-concentrator.dts new file mode 100644 index 000000000000..84b095279e65 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-flex-concentrator.dts @@ -0,0 +1,314 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for Kamstrup OMNIA Flex Concentrator. + * + * Copyright (C) 2020 Kamstrup A/S + * Author: Bruno Thomsen <bruno.thomsen@gmail.com> + */ + +/dts-v1/; + +#include "imx7d-tqma7.dtsi" + +/* One I2C device on TQMa7 SoM is not mounted */ +/delete-node/ &ds1339; + +/ { + model = "Kamstrup OMNIA Flex Concentrator"; + compatible = "kam,imx7d-flex-concentrator", "fsl,imx7d"; + + memory@80000000 { + device_type = "memory"; + /* 1024 MB - TQMa7D board configuration */ + reg = <0x80000000 0x40000000>; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "VBUS_USBOTG2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8_REF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&sw2_reg>; + }; + + /* + * Human Machine Interface consists of 4 dual red/green LEDs. + * hmi-a:green is controlled directly by the switch-mode power supply. + * hmi-a:red is not used. + */ + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + label = "hmi-b:red:heartbeat-degraded"; + gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + label = "hmi-b:green:heartbeat-running"; + gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-2 { + label = "hmi-c:red:mesh-error"; + gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + }; + + led-3 { + label = "hmi-c:green:mesh-activity"; + gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + }; + + led-4 { + label = "hmi-d:red:omnia-error"; + gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; + }; + + led-5 { + label = "hmi-d:green:omnia-activity"; + gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + }; + }; + + /* + * Errata e10574 board restart workaround. + */ + gpio-restart { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_restart>; + compatible = "gpio-restart"; + gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +/* + * Analog signals + * ADC1_IN0: SMPS - 5V output monitor (voltage divider: 1/0.2806) + */ +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + num-chipselects = <1>; + cs-gpios = <&gpio4 23 GPIO_ACTIVE_LOW>; + status = "okay"; + + pcf2127: rtc@0 { + compatible = "nxp,pcf2127"; + reg = <0>; + spi-max-frequency = <2000000>; + }; +}; + +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + num-chipselects = <1>; + cs-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>; + status = "okay"; + + /* + * ST chip maximum SPI clock frequency is 33 MHz. + * + * TCG specification - Section 6.4.1 Clocking: + * TPM shall support a SPI clock frequency range of 10-24 MHz. + */ + st33htph: tpm-tis@0 { + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <24000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy>; + status = "okay"; + + /* + * MDIO bus reset is used to generate PHY device reset before + * Ethernet PHY type ID auto-detection. Otherwise this communication + * fails as device does not answer when recommended reset circuit + * is used. + */ + mdio { + #address-cells = <1>; + #size-cells = <0>; + + reset-delay-us = <100000>; + reset-post-delay-us = <500000>; + reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; + + /* Microchip/Micrel KSZ8081RNB */ + ethphy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + reg = <1>; + }; + }; +}; + +/* + * Detection signals for internal USB modules. + * Used for robust USB plug and play handling such as USB downstream port + * power-cycle and USB hub reset in case of misbehaving or crashed modules. + * + * SMPS - AC input monitor based on zero crossing. + * Used for last gasp notification. + */ +&gpio3 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "smps-ac-monitor", "", "usb-hub-reset", "", + "", "", "", "", "", "", "", "", + "", "module-b-detection", "", "module-a-detection", "", "", "", ""; +}; + +/* + * Tamper IRQ trigger timestamp reading. + * Used for sealed cover opened/closed notification. + */ +&gpio5 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "rtc-tamper-irq", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_misc>; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO 0x7c /* X2-15 */ + MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x74 /* X2-18 */ + MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x74 /* X2-13 */ + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x74 /* X2-20 */ + /* RTC - Tamper IRQ */ + MX7D_PAD_SD2_CLK__GPIO5_IO12 0x3c /* X1-92 */ + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX7D_PAD_LCD_CLK__ECSPI4_MISO 0x7c /* X2-72 */ + MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI 0x74 /* X2-68 */ + MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK 0x74 /* X2-76 */ + MX7D_PAD_LCD_VSYNC__GPIO3_IO3 0x74 /* X2-78 */ + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x03 /* X2-48 */ + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x03 /* X2-46 */ + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71 /* X2-53 */ + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71 /* X2-55 */ + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71 /* X2-61 */ + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x79 /* X2-56 */ + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x79 /* X2-58 */ + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x79 /* X2-64 */ + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x73 /* X2-52 */ + /* PHY reset: SRE_FAST, DSE_X1 */ + MX7D_PAD_ENET1_COL__GPIO7_IO15 0x00 /* X1-96 */ + /* Clock from PHY to MAC: 100kPU */ + MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x70 /* X3-4 */ + /* PHY interrupt: 100kPU, HYS */ + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x78 /* X1-80 */ + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA01__GPIO3_IO6 0x14 /* X2-82 */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* X1-82 */ + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* X1-84 */ + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* X1-86 */ + MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x14 /* X1-88 */ + MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x14 /* X1-90 */ + >; + }; + + pinctrl_misc: miscgrp { + fsl,pins = < + /* Module A detection (low = present) */ + MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x7c /* X2-105 */ + /* Module B detection (low = present) */ + MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x7c /* X2-103 */ + /* SMPS - AC input monitor (high = failure) */ + MX7D_PAD_LCD_DATA07__GPIO3_IO12 0x7c /* X2-88 */ + /* USB - Hub reset */ + MX7D_PAD_LCD_DATA09__GPIO3_IO14 0x74 /* X2-92 */ + >; + }; + + pinctrl_restart: restartgrp { + fsl,pins = < + MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x74 /* X1-94 */ + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX 0x7e /* X3-14 */ + MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX 0x76 /* X3-16 */ + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC 0x5c /* X3-11 */ + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59 /* X3-9 */ + >; + }; + +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; +}; + +&usbotg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2>; + vbus-supply = <®_usb_otg2_vbus>; + srp-disable; + hnp-disable; + adp-disable; + over-current-active-low; + dr_mode = "host"; + status = "okay"; +}; + +/* + * External watchdog feature provided by pcf2127. + */ +&wdog1 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts index 221274c73dbd..5ef86de53013 100644 --- a/arch/arm/boot/dts/imx7d-mba7.dts +++ b/arch/arm/boot/dts/imx7d-mba7.dts @@ -14,7 +14,7 @@ / { model = "TQ Systems TQMa7D board on MBa7 carrier board"; - compatible = "tq,imx7d-mba7", "fsl,imx7d"; + compatible = "tq,imx7d-mba7", "tq,imx7d-tqma7", "fsl,imx7d"; }; &fec2 { @@ -39,10 +39,7 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - /* LED1: Link/Activity, LED2: error */ - ti,led-function = <0x0db0>; - /* active low, LED1/2 driven by phy */ - ti,led-ctrl = <0x1001>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; }; }; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index cff875b80b60..b0bcfa9094a3 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -7,6 +7,12 @@ #include <dt-bindings/reset/imx7-reset.h> / { + aliases { + usb0 = &usbotg1; + usb1 = &usbotg2; + usb2 = &usbh; + }; + cpus { cpu0: cpu@0 { clock-frequency = <996000000>; diff --git a/arch/arm/boot/dts/imx7s-mba7.dts b/arch/arm/boot/dts/imx7s-mba7.dts index a143d566a38b..d7d3f530f843 100644 --- a/arch/arm/boot/dts/imx7s-mba7.dts +++ b/arch/arm/boot/dts/imx7s-mba7.dts @@ -14,5 +14,5 @@ / { model = "TQ Systems TQMa7S board on MBa7 carrier board"; - compatible = "tq,imx7s-mba7", "fsl,imx7s"; + compatible = "tq,imx7s-mba7", "tq,imx7s-tqma7", "fsl,imx7s"; }; diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index d6b4888fa686..569bbd84e371 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -10,8 +10,8 @@ #include "imx7s.dtsi" / { - model = "Warp i.MX7 Board"; - compatible = "warp,imx7s-warp", "fsl,imx7s"; + model = "Element14 Warp i.MX7 Board"; + compatible = "element14,imx7s-warp", "fsl,imx7s"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 84d9cc13afb9..251007a7b836 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -47,6 +47,8 @@ spi1 = &ecspi2; spi2 = &ecspi3; spi3 = &ecspi4; + usb0 = &usbotg1; + usb1 = &usbh; }; cpus { @@ -971,7 +973,7 @@ clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CAN1_ROOT_CLK>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 1 0x10 17>; + fsl,stop-mode = <&gpr 0x10 1>; status = "disabled"; }; @@ -982,7 +984,7 @@ clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CAN2_ROOT_CLK>; clock-names = "ipg", "per"; - fsl,stop-mode = <&gpr 0x10 2 0x10 18>; + fsl,stop-mode = <&gpr 0x10 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 8b3d64c913d8..14e26a4fd62a 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -46,6 +46,14 @@ regulator-always-on; }; + vcc1v8_ldo2_reg: fixedregulator-vcc1v8-ldo2 { + compatible = "regulator-fixed"; + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + hdmi: connector { compatible = "hdmi-connector"; label = "hdmi"; @@ -58,6 +66,57 @@ }; }; }; + + aud_mclk: aud_mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; + + sound0: sound@0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "K2G-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In"; + + simple-audio-card,dai-link@0 { + format = "i2s"; + bitclock-master = <&sound0_0_master>; + frame-master = <&sound0_0_master>; + sound0_0_master: cpu { + sound-dai = <&mcasp2>; + clocks = <&k2g_clks 0x6 1>; + system-clock-direction-out; + }; + + codec { + sound-dai = <&tlv320aic3106>; + clocks = <&aud_mclk>; + }; + }; + + simple-audio-card,dai-link@1 { + format = "i2s"; + bitclock-master = <&sound0_1_master>; + frame-master = <&sound0_1_master>; + sound0_1_master: cpu { + sound-dai = <&mcasp2>; + clocks = <&k2g_clks 0x6 1>; + system-clock-direction-out; + }; + + codec { + sound-dai = <&sii9022>; + clocks = <&aud_mclk>; + }; + }; + }; }; &k2g_pinctrl { @@ -214,6 +273,15 @@ K2G_CORE_IOPAD(0x10e8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssfid.dssfid */ >; }; + + mcasp2_pins: pinmux_mcasp2_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x1234) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo2.mcasp2_axr2 */ + K2G_CORE_IOPAD(0x1238) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo3.mcasp2_axr3 */ + K2G_CORE_IOPAD(0x1254) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo10.mcasp2_afsx */ + K2G_CORE_IOPAD(0x125c) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo12.mcasp2_aclkx */ + >; + }; }; &uart0 { @@ -423,6 +491,10 @@ compatible = "sil,sii9022"; reg = <0x3b>; + sil,i2s-data-lanes = < 0 >; + clocks = <&aud_mclk>; + clock-names = "mclk"; + ports { #address-cells = <1>; #size-cells = <0>; @@ -444,6 +516,19 @@ }; }; }; + + tlv320aic3106: tlv320aic3106@1b { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + status = "okay"; + + /* Regulators */ + AVDD-supply = <&vcc3v3_dcin_reg>; + IOVDD-supply = <&vcc3v3_dcin_reg>; + DRVDD-supply = <&vcc3v3_dcin_reg>; + DVDD-supply = <&vcc1v8_ldo2_reg>; + }; }; &dss { @@ -458,3 +543,30 @@ }; }; }; + +&k2g_clks { + /* on the board 22.5792MHz is connected to AUDOSC_IN */ + assigned-clocks = <&k2g_clks 0x4c 2>; + assigned-clock-rates = <22579200>; +}; + +&mcasp2 { + #sound-dai-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&mcasp2_pins>; + + assigned-clocks = <&k2g_clks 0x6 1>; + assigned-clock-parents = <&k2g_clks 0x6 2>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 6 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 2 0 0 // AXR2: TX, AXR3: rx + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 6a3f1bf6d9f1..264938dfa4d9 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -34,7 +34,7 @@ }; }; serial@12000 { - status = "ok"; + status = "okay"; }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 7f326e267494..328516351e84 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -34,7 +34,7 @@ }; }; serial@12000 { - status = "ok"; + status = "okay"; }; spi@10600 { diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index 02d87e0a1061..d4cb3cd3e2a2 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -66,7 +66,7 @@ }; }; serial@12000 { - status = "ok"; + status = "okay"; }; sata@80000 { diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index ff1260ee3fe8..dfb41393941d 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -38,7 +38,7 @@ }; }; serial@12000 { - status = "ok"; + status = "okay"; }; sata@80000 { diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 4a512d80912c..95af7aa1fdcb 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -72,7 +72,7 @@ }; }; serial@12000 { - status = "ok"; + status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 62272d58664f..2338f495d517 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -112,7 +112,7 @@ }; serial@12000 { - status = "ok"; + status = "okay"; }; sata@80000 { diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi index 2c4037b07282..8f73197f251a 100644 --- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi @@ -45,7 +45,7 @@ }; serial@12000 { - status = "ok"; + status = "okay"; }; sata@80000 { diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 6c8d94beae78..fca31a5d5ac7 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -369,7 +369,7 @@ clocks = <&gate_clk 14>; clock-names = "sata"; #phy-cells = <0>; - status = "ok"; + status = "okay"; }; sata_phy1: sata-phy@84000 { @@ -378,7 +378,7 @@ clocks = <&gate_clk 15>; clock-names = "sata"; #phy-cells = <0>; - status = "ok"; + status = "okay"; }; audio0: audio-controller@a0000 { diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index 7b7ec7b1217b..3a5cfb0ddb20 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -123,7 +123,6 @@ clocks = <&usbclk LPC32XX_USB_CLK_I2C>; #address-cells = <1>; #size-cells = <0>; - pnx,timeout = <0x64>; }; usbclk: clock-controller@f00 { @@ -286,7 +285,6 @@ interrupts = <19 IRQ_TYPE_LEVEL_LOW>; #address-cells = <1>; #size-cells = <0>; - pnx,timeout = <0x64>; clocks = <&clk LPC32XX_CLK_I2C1>; }; @@ -297,7 +295,6 @@ interrupts = <18 IRQ_TYPE_LEVEL_LOW>; #address-cells = <1>; #size-cells = <0>; - pnx,timeout = <0x64>; clocks = <&clk LPC32XX_CLK_I2C2>; }; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 827373ef1a54..007dd2bd0595 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -173,7 +173,7 @@ dcfg: dcfg@1ee0000 { compatible = "fsl,ls1021a-dcfg", "syscon"; - reg = <0x0 0x1ee0000 0x0 0x10000>; + reg = <0x0 0x1ee0000 0x0 0x1000>; big-endian; }; @@ -288,46 +288,43 @@ compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>; - fsl,tmu-calibration = <0x00000000 0x0000000f - 0x00000001 0x00000017 - 0x00000002 0x0000001e - 0x00000003 0x00000026 - 0x00000004 0x0000002e - 0x00000005 0x00000035 - 0x00000006 0x0000003d - 0x00000007 0x00000044 - 0x00000008 0x0000004c - 0x00000009 0x00000053 - 0x0000000a 0x0000005b - 0x0000000b 0x00000064 - - 0x00010000 0x00000011 - 0x00010001 0x0000001c - 0x00010002 0x00000024 - 0x00010003 0x0000002b - 0x00010004 0x00000034 - 0x00010005 0x00000039 - 0x00010006 0x00000042 - 0x00010007 0x0000004c - 0x00010008 0x00000051 - 0x00010009 0x0000005a - 0x0001000a 0x00000063 - - 0x00020000 0x00000013 - 0x00020001 0x00000019 - 0x00020002 0x00000024 - 0x00020003 0x0000002c - 0x00020004 0x00000035 - 0x00020005 0x0000003d - 0x00020006 0x00000046 - 0x00020007 0x00000050 - 0x00020008 0x00000059 - - 0x00030000 0x00000002 - 0x00030001 0x0000000d - 0x00030002 0x00000019 - 0x00030003 0x00000024>; + fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>; + fsl,tmu-calibration = <0x00000000 0x00000020 + 0x00000001 0x00000024 + 0x00000002 0x0000002a + 0x00000003 0x00000032 + 0x00000004 0x00000038 + 0x00000005 0x0000003e + 0x00000006 0x00000043 + 0x00000007 0x0000004a + 0x00000008 0x00000050 + 0x00000009 0x00000059 + 0x0000000a 0x0000005f + 0x0000000b 0x00000066 + + 0x00010000 0x00000023 + 0x00010001 0x0000002b + 0x00010002 0x00000033 + 0x00010003 0x0000003a + 0x00010004 0x00000042 + 0x00010005 0x0000004a + 0x00010006 0x00000054 + 0x00010007 0x0000005c + 0x00010008 0x00000065 + 0x00010009 0x0000006f + + 0x00020000 0x00000029 + 0x00020001 0x00000033 + 0x00020002 0x0000003d + 0x00020003 0x00000048 + 0x00020004 0x00000054 + 0x00020005 0x00000060 + 0x00020006 0x0000006c + + 0x00030000 0x00000025 + 0x00030001 0x00000033 + 0x00030002 0x00000043 + 0x00030003 0x00000055>; #thermal-sensor-cells = <1>; }; @@ -1013,7 +1010,7 @@ compatible = "fsl,ls1021a-ftm-alarm"; reg = <0x0 0x29d0000 0x0 0x10000>; reg-names = "ftm"; - fsl,rcpm-wakeup = <&rcpm 0x20000 0x0>; + fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; big-endian; }; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index 0c26467de4d0..5963566dbcc9 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -224,7 +224,7 @@ reg = <0>; reset-assert-us = <10000>; - reset-deassert-us = <30000>; + reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts index cc498191ddd1..8f4eb1ed4581 100644 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -81,7 +81,7 @@ reg = <0>; reset-assert-us = <10000>; - reset-deassert-us = <30000>; + reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts index f1a41152e9dd..342304f5653a 100644 --- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts +++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts @@ -223,16 +223,15 @@ }; &ssp3 { - /delete-property/ #address-cells; - /delete-property/ #size-cells; + #address-cells = <0>; spi-slave; status = "okay"; - ready-gpio = <&gpio 125 GPIO_ACTIVE_HIGH>; + ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>; slave { compatible = "olpc,xo1.75-ec"; spi-cpha; - cmd-gpio = <&gpio 155 GPIO_ACTIVE_HIGH>; + cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi index cc4efd0efabd..4ae630d37d09 100644 --- a/arch/arm/boot/dts/mmp3.dtsi +++ b/arch/arm/boot/dts/mmp3.dtsi @@ -296,6 +296,7 @@ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&soc_clocks MMP2_CLK_CCIC0>; clock-names = "axi"; + power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>; #clock-cells = <0>; clock-output-names = "mclk"; status = "disabled"; @@ -307,6 +308,7 @@ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&soc_clocks MMP2_CLK_CCIC1>; clock-names = "axi"; + power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>; #clock-cells = <0>; clock-output-names = "mclk"; status = "disabled"; diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index d5ded4f794df..f75806d0cd47 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -113,32 +113,9 @@ enable-active-high; }; - gpio_keys { - compatible = "gpio-keys"; - - volume_down { - label = "Volume Down"; - gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */ - linux,code = <KEY_VOLUMEDOWN>; - linux,can-disable; - /* Value above 7.95ms for no GPIO hardware debounce */ - debounce-interval = <10>; - }; - - slider { - label = "Keypad Slide"; - gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */ - linux,input-type = <EV_SW>; - linux,code = <SW_KEYPAD_SLIDE>; - linux,can-disable; - /* Value above 7.95ms for no GPIO hardware debounce */ - debounce-interval = <10>; - }; - }; - soundcard { compatible = "audio-graph-card"; - label = "Droid 4 Audio"; + label = "Mapphone Audio"; widgets = "Speaker", "Earpiece", @@ -282,80 +259,6 @@ }; }; -&keypad { - keypad,num-rows = <8>; - keypad,num-columns = <8>; - linux,keymap = < - - /* Row 1 */ - MATRIX_KEY(0, 2, KEY_1) - MATRIX_KEY(0, 6, KEY_2) - MATRIX_KEY(2, 3, KEY_3) - MATRIX_KEY(0, 7, KEY_4) - MATRIX_KEY(0, 4, KEY_5) - MATRIX_KEY(5, 5, KEY_6) - MATRIX_KEY(0, 1, KEY_7) - MATRIX_KEY(0, 5, KEY_8) - MATRIX_KEY(0, 0, KEY_9) - MATRIX_KEY(1, 6, KEY_0) - - /* Row 2 */ - MATRIX_KEY(3, 4, KEY_APOSTROPHE) - MATRIX_KEY(7, 6, KEY_Q) - MATRIX_KEY(7, 7, KEY_W) - MATRIX_KEY(7, 2, KEY_E) - MATRIX_KEY(1, 0, KEY_R) - MATRIX_KEY(4, 4, KEY_T) - MATRIX_KEY(1, 2, KEY_Y) - MATRIX_KEY(6, 7, KEY_U) - MATRIX_KEY(2, 2, KEY_I) - MATRIX_KEY(5, 6, KEY_O) - MATRIX_KEY(3, 7, KEY_P) - MATRIX_KEY(6, 5, KEY_BACKSPACE) - - /* Row 3 */ - MATRIX_KEY(5, 4, KEY_TAB) - MATRIX_KEY(5, 7, KEY_A) - MATRIX_KEY(2, 7, KEY_S) - MATRIX_KEY(7, 0, KEY_D) - MATRIX_KEY(2, 6, KEY_F) - MATRIX_KEY(6, 2, KEY_G) - MATRIX_KEY(6, 6, KEY_H) - MATRIX_KEY(1, 4, KEY_J) - MATRIX_KEY(3, 1, KEY_K) - MATRIX_KEY(2, 1, KEY_L) - MATRIX_KEY(4, 6, KEY_ENTER) - - /* Row 4 */ - MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */ - MATRIX_KEY(6, 1, KEY_Z) - MATRIX_KEY(7, 4, KEY_X) - MATRIX_KEY(5, 1, KEY_C) - MATRIX_KEY(1, 7, KEY_V) - MATRIX_KEY(2, 4, KEY_B) - MATRIX_KEY(4, 1, KEY_N) - MATRIX_KEY(1, 1, KEY_M) - MATRIX_KEY(3, 5, KEY_COMMA) - MATRIX_KEY(5, 2, KEY_DOT) - MATRIX_KEY(6, 3, KEY_UP) - MATRIX_KEY(7, 3, KEY_OK) - - /* Row 5 */ - MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */ - MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */ - MATRIX_KEY(6, 0, KEY_MINUS) - MATRIX_KEY(4, 7, KEY_EQUAL) - MATRIX_KEY(1, 5, KEY_SPACE) - MATRIX_KEY(3, 2, KEY_SLASH) - MATRIX_KEY(4, 3, KEY_LEFT) - MATRIX_KEY(5, 3, KEY_DOWN) - MATRIX_KEY(3, 3, KEY_RIGHT) - - /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */ - MATRIX_KEY(5, 0, KEY_VOLUMEUP) - >; -}; - &mmc1 { vmmc-supply = <&vwlan2>; bus-width = <4>; @@ -395,34 +298,6 @@ }; }; -&i2c1 { - led-controller@38 { - compatible = "ti,lm3532"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x38>; - - enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; - - ramp-up-us = <1024>; - ramp-down-us = <8193>; - - backlight_led: led@0 { - reg = <0>; - led-sources = <2>; - ti,led-mode = <0>; - label = ":backlight"; - }; - - led@1 { - reg = <1>; - led-sources = <1>; - ti,led-mode = <0>; - label = ":kbd_backlight"; - }; - }; -}; - &i2c2 { touchscreen@4a { compatible = "atmel,maxtouch"; @@ -430,7 +305,7 @@ pinctrl-names = "default"; pinctrl-0 = <&touchscreen_pins>; - reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */ + reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */ /* gpio_183 with sys_nirq2 pad as wakeup */ interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>, @@ -796,20 +671,6 @@ "0", "0", "-1"; }; - - lis3dh: accelerometer@18 { - compatible = "st,lis3dh-accel"; - reg = <0x18>; - - vdd-supply = <&vhvio>; - - interrupt-parent = <&gpio2>; - interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */ - - rotation-matrix = "0", "-1", "0", - "1", "0", "0", - "0", "0", "1"; - }; }; &mcbsp2 { diff --git a/arch/arm/boot/dts/mstar-infinity.dtsi b/arch/arm/boot/dts/mstar-infinity.dtsi index cd911adef014..0bee517797f4 100644 --- a/arch/arm/boot/dts/mstar-infinity.dtsi +++ b/arch/arm/boot/dts/mstar-infinity.dtsi @@ -6,6 +6,13 @@ #include "mstar-v7.dtsi" +#include <dt-bindings/gpio/msc313-gpio.h> + &imi { reg = <0xa0000000 0x16000>; }; + +&gpio { + compatible = "mstar,msc313-gpio"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-ssd201htv2.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-ssd201htv2.dts new file mode 100644 index 000000000000..5d81641414a2 --- /dev/null +++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-ssd201htv2.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2020 thingy.jp. + * Author: Daniel Palmer <daniel@thingy.jp> + */ + +/dts-v1/; +#include "mstar-infinity2m-ssd202d.dtsi" + +/ { + model = "SSD201_HT_V2"; + compatible = "honestar,ssd201htv2", "mstar,infinity2m"; + + aliases { + serial0 = &pm_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&pm_uart { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd202d.dtsi new file mode 100644 index 000000000000..176e10a29896 --- /dev/null +++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2020 thingy.jp. + * Author: Daniel Palmer <daniel@thingy.jp> + */ + +#include "mstar-infinity2m-ssd20xd.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x20000000 0x8000000>; + }; +}; diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi new file mode 100644 index 000000000000..7a5e28b33f96 --- /dev/null +++ b/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2020 thingy.jp. + * Author: Daniel Palmer <daniel@thingy.jp> + */ + +#include "mstar-infinity2m.dtsi" + +&smpctrl { + compatible = "sstar,ssd201-smpctrl", "mstar,smpctrl"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mstar-infinity2m.dtsi b/arch/arm/boot/dts/mstar-infinity2m.dtsi new file mode 100644 index 000000000000..6d4d1d224e96 --- /dev/null +++ b/arch/arm/boot/dts/mstar-infinity2m.dtsi @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2020 thingy.jp. + * Author: Daniel Palmer <daniel@thingy.jp> + */ + +#include "mstar-infinity.dtsi" + +&cpus { + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + }; +}; + +&riu { + smpctrl: smpctrl@204000 { + reg = <0x204000 0x200>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi index f07880561e11..b0a21b0b731f 100644 --- a/arch/arm/boot/dts/mstar-v7.dtsi +++ b/arch/arm/boot/dts/mstar-v7.dtsi @@ -12,7 +12,7 @@ #size-cells = <1>; interrupt-parent = <&gic>; - cpus { + cpus: cpus { #address-cells = <1>; #size-cells = <0>; @@ -109,6 +109,16 @@ reg = <0x204400 0x200>; }; + gpio: gpio@207800 { + #gpio-cells = <2>; + reg = <0x207800 0x200>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&intc_fiq>; + status = "disabled"; + }; + pm_uart: uart@221000 { compatible = "ns16550a"; reg = <0x221000 0x100>; diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi index d2d0761295a4..3696980a3da1 100644 --- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi +++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi @@ -3,6 +3,8 @@ // Copyright 2018 Google, Inc. #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/nuvoton,npcm7xx-clock.h> +#include <dt-bindings/reset/nuvoton,npcm7xx-reset.h> / { #address-cells = <1>; @@ -63,12 +65,6 @@ interrupt-parent = <&gic>; ranges = <0x0 0xf0000000 0x00900000>; - gcr: gcr@800000 { - compatible = "nuvoton,npcm750-gcr", "syscon", - "simple-mfd"; - reg = <0x800000 0x1000>; - }; - scu: scu@3fe000 { compatible = "arm,cortex-a9-scu"; reg = <0x3fe000 0x1000>; @@ -80,7 +76,7 @@ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; cache-unified; cache-level = <2>; - clocks = <&clk 10>; + clocks = <&clk NPCM7XX_CLK_AXI>; arm,shared-override; }; @@ -91,6 +87,16 @@ reg = <0x3ff000 0x1000>, <0x3fe100 0x100>; }; + + gcr: gcr@800000 { + compatible = "nuvoton,npcm750-gcr", "syscon", "simple-mfd"; + reg = <0x800000 0x1000>; + }; + + rst: rst@801000 { + compatible = "nuvoton,npcm750-rst", "syscon", "simple-mfd"; + reg = <0x801000 0x6C>; + }; }; ahb { @@ -100,6 +106,12 @@ interrupt-parent = <&gic>; ranges; + rstc: rstc@f0801000 { + compatible = "nuvoton,npcm750-reset"; + reg = <0xf0801000 0x70>; + #reset-cells = <2>; + }; + clk: clock-controller@f0801000 { compatible = "nuvoton,npcm750-clk", "syscon"; #clock-cells = <1>; @@ -109,6 +121,63 @@ clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>; }; + gmac0: eth@f0802000 { + device_type = "network"; + compatible = "snps,dwmac"; + reg = <0xf0802000 0x2000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + ethernet = <0>; + clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>; + clock-names = "stmmaceth", "clk_gmac"; + pinctrl-names = "default"; + pinctrl-0 = <&rg1_pins + &rg1mdio_pins>; + status = "disabled"; + }; + + ehci1: usb@f0806000 { + compatible = "nuvoton,npcm750-ehci"; + reg = <0xf0806000 0x1000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + fiu0: spi@fb000000 { + compatible = "nuvoton,npcm750-fiu"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfb000000 0x1000>; + reg-names = "control", "memory"; + clocks = <&clk NPCM7XX_CLK_SPI0>; + clock-names = "clk_spi0"; + status = "disabled"; + }; + + fiu3: spi@c0000000 { + compatible = "nuvoton,npcm750-fiu"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc0000000 0x1000>; + reg-names = "control", "memory"; + clocks = <&clk NPCM7XX_CLK_SPI3>; + clock-names = "clk_spi3"; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins>; + status = "disabled"; + }; + + fiux: spi@fb001000 { + compatible = "nuvoton,npcm750-fiu"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfb001000 0x1000>; + reg-names = "control", "memory"; + clocks = <&clk NPCM7XX_CLK_SPIX>; + clock-names = "clk_spix"; + status = "disabled"; + }; + apb { #address-cells = <1>; #size-cells = <1>; @@ -116,11 +185,73 @@ interrupt-parent = <&gic>; ranges = <0x0 0xf0000000 0x00300000>; + lpc_kcs: lpc_kcs@7000 { + compatible = "nuvoton,npcm750-lpc-kcs", "simple-mfd", "syscon"; + reg = <0x7000 0x40>; + reg-io-width = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7000 0x40>; + + kcs1: kcs1@0 { + compatible = "nuvoton,npcm750-kcs-bmc"; + reg = <0x0 0x40>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <1>; + status = "disabled"; + }; + + kcs2: kcs2@0 { + compatible = "nuvoton,npcm750-kcs-bmc"; + reg = <0x0 0x40>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <2>; + status = "disabled"; + }; + + kcs3: kcs3@0 { + compatible = "nuvoton,npcm750-kcs-bmc"; + reg = <0x0 0x40>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <3>; + status = "disabled"; + }; + }; + + spi0: spi@200000 { + compatible = "nuvoton,npcm750-pspi"; + reg = <0x200000 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pspi1_pins>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_APB5>; + clock-names = "clk_apb5"; + resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>; + status = "disabled"; + }; + + spi1: spi@201000 { + compatible = "nuvoton,npcm750-pspi"; + reg = <0x201000 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pspi2_pins>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_APB5>; + clock-names = "clk_apb5"; + resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI2>; + status = "disabled"; + }; + timer0: timer@8000 { compatible = "nuvoton,npcm750-timer"; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x8000 0x50>; - clocks = <&clk 5>; + reg = <0x8000 0x1C>; + clocks = <&clk NPCM7XX_CLK_TIMER>; }; watchdog0: watchdog@801C { @@ -128,7 +259,7 @@ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; reg = <0x801C 0x4>; status = "disabled"; - clocks = <&clk 5>; + clocks = <&clk NPCM7XX_CLK_TIMER>; }; watchdog1: watchdog@901C { @@ -136,7 +267,7 @@ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; reg = <0x901C 0x4>; status = "disabled"; - clocks = <&clk 5>; + clocks = <&clk NPCM7XX_CLK_TIMER>; }; watchdog2: watchdog@a01C { @@ -144,13 +275,13 @@ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; reg = <0xa01C 0x4>; status = "disabled"; - clocks = <&clk 5>; + clocks = <&clk NPCM7XX_CLK_TIMER>; }; serial0: serial@1000 { compatible = "nuvoton,npcm750-uart"; reg = <0x1000 0x1000>; - clocks = <&clk 6>; + clocks = <&clk NPCM7XX_CLK_UART>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; status = "disabled"; @@ -159,7 +290,7 @@ serial1: serial@2000 { compatible = "nuvoton,npcm750-uart"; reg = <0x2000 0x1000>; - clocks = <&clk 6>; + clocks = <&clk NPCM7XX_CLK_UART>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; status = "disabled"; @@ -168,7 +299,7 @@ serial2: serial@3000 { compatible = "nuvoton,npcm750-uart"; reg = <0x3000 0x1000>; - clocks = <&clk 6>; + clocks = <&clk NPCM7XX_CLK_UART>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; status = "disabled"; @@ -177,11 +308,815 @@ serial3: serial@4000 { compatible = "nuvoton,npcm750-uart"; reg = <0x4000 0x1000>; - clocks = <&clk 6>; + clocks = <&clk NPCM7XX_CLK_UART>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; status = "disabled"; }; + + rng: rng@b000 { + compatible = "nuvoton,npcm750-rng"; + reg = <0xb000 0x8>; + status = "disabled"; + }; + + adc: adc@c000 { + compatible = "nuvoton,npcm750-adc"; + reg = <0xc000 0x8>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_ADC>; + resets = <&rstc NPCM7XX_RESET_IPSRST1 NPCM7XX_RESET_ADC>; + status = "disabled"; + }; + + pwm_fan: pwm-fan-controller@103000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nuvoton,npcm750-pwm-fan"; + reg = <0x103000 0x2000>, <0x180000 0x8000>; + reg-names = "pwm", "fan"; + clocks = <&clk NPCM7XX_CLK_APB3>, + <&clk NPCM7XX_CLK_APB4>; + clock-names = "pwm","fan"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins &pwm1_pins + &pwm2_pins &pwm3_pins + &pwm4_pins &pwm5_pins + &pwm6_pins &pwm7_pins + &fanin0_pins &fanin1_pins + &fanin2_pins &fanin3_pins + &fanin4_pins &fanin5_pins + &fanin6_pins &fanin7_pins + &fanin8_pins &fanin9_pins + &fanin10_pins &fanin11_pins + &fanin12_pins &fanin13_pins + &fanin14_pins &fanin15_pins>; + status = "disabled"; + }; + + i2c0: i2c@80000 { + reg = <0x80000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb0_pins>; + status = "disabled"; + }; + + i2c1: i2c@81000 { + reg = <0x81000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb1_pins>; + status = "disabled"; + }; + + i2c2: i2c@82000 { + reg = <0x82000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb2_pins>; + status = "disabled"; + }; + + i2c3: i2c@83000 { + reg = <0x83000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb3_pins>; + status = "disabled"; + }; + + i2c4: i2c@84000 { + reg = <0x84000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb4_pins>; + status = "disabled"; + }; + + i2c5: i2c@85000 { + reg = <0x85000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb5_pins>; + status = "disabled"; + }; + + i2c6: i2c@86000 { + reg = <0x86000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb6_pins>; + status = "disabled"; + }; + + i2c7: i2c@87000 { + reg = <0x87000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb7_pins>; + status = "disabled"; + }; + + i2c8: i2c@88000 { + reg = <0x88000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb8_pins>; + status = "disabled"; + }; + + i2c9: i2c@89000 { + reg = <0x89000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb9_pins>; + status = "disabled"; + }; + + i2c10: i2c@8a000 { + reg = <0x8a000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb10_pins>; + status = "disabled"; + }; + + i2c11: i2c@8b000 { + reg = <0x8b000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb11_pins>; + status = "disabled"; + }; + + i2c12: i2c@8c000 { + reg = <0x8c000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb12_pins>; + status = "disabled"; + }; + + i2c13: i2c@8d000 { + reg = <0x8d000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb13_pins>; + status = "disabled"; + }; + + i2c14: i2c@8e000 { + reg = <0x8e000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb14_pins>; + status = "disabled"; + }; + + i2c15: i2c@8f000 { + reg = <0x8f000 0x1000>; + compatible = "nuvoton,npcm750-i2c"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk NPCM7XX_CLK_APB2>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&smb15_pins>; + status = "disabled"; + }; + }; + }; + + pinctrl: pinctrl@f0800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nuvoton,npcm750-pinctrl", "syscon", "simple-mfd"; + ranges = <0 0xf0010000 0x8000>; + gpio0: gpio@f0010000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 0 32>; + }; + gpio1: gpio@f0011000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1000 0x80>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 32 32>; + }; + gpio2: gpio@f0012000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2000 0x80>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 64 32>; + }; + gpio3: gpio@f0013000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x3000 0x80>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 96 32>; + }; + gpio4: gpio@f0014000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x4000 0x80>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 128 32>; + }; + gpio5: gpio@f0015000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x5000 0x80>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 160 32>; + }; + gpio6: gpio@f0016000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x6000 0x80>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 192 32>; + }; + gpio7: gpio@f0017000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x7000 0x80>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 224 32>; + }; + + iox1_pins: iox1-pins { + groups = "iox1"; + function = "iox1"; + }; + iox2_pins: iox2-pins { + groups = "iox2"; + function = "iox2"; + }; + smb1d_pins: smb1d-pins { + groups = "smb1d"; + function = "smb1d"; + }; + smb2d_pins: smb2d-pins { + groups = "smb2d"; + function = "smb2d"; + }; + lkgpo1_pins: lkgpo1-pins { + groups = "lkgpo1"; + function = "lkgpo1"; + }; + lkgpo2_pins: lkgpo2-pins { + groups = "lkgpo2"; + function = "lkgpo2"; + }; + ioxh_pins: ioxh-pins { + groups = "ioxh"; + function = "ioxh"; + }; + gspi_pins: gspi-pins { + groups = "gspi"; + function = "gspi"; + }; + smb5b_pins: smb5b-pins { + groups = "smb5b"; + function = "smb5b"; + }; + smb5c_pins: smb5c-pins { + groups = "smb5c"; + function = "smb5c"; + }; + lkgpo0_pins: lkgpo0-pins { + groups = "lkgpo0"; + function = "lkgpo0"; + }; + pspi2_pins: pspi2-pins { + groups = "pspi2"; + function = "pspi2"; + }; + smb4den_pins: smb4den-pins { + groups = "smb4den"; + function = "smb4den"; + }; + smb4b_pins: smb4b-pins { + groups = "smb4b"; + function = "smb4b"; + }; + smb4c_pins: smb4c-pins { + groups = "smb4c"; + function = "smb4c"; + }; + smb15_pins: smb15-pins { + groups = "smb15"; + function = "smb15"; + }; + smb4d_pins: smb4d-pins { + groups = "smb4d"; + function = "smb4d"; + }; + smb14_pins: smb14-pins { + groups = "smb14"; + function = "smb14"; + }; + smb5_pins: smb5-pins { + groups = "smb5"; + function = "smb5"; + }; + smb4_pins: smb4-pins { + groups = "smb4"; + function = "smb4"; + }; + smb3_pins: smb3-pins { + groups = "smb3"; + function = "smb3"; + }; + spi0cs1_pins: spi0cs1-pins { + groups = "spi0cs1"; + function = "spi0cs1"; + }; + spi0cs2_pins: spi0cs2-pins { + groups = "spi0cs2"; + function = "spi0cs2"; + }; + spi0cs3_pins: spi0cs3-pins { + groups = "spi0cs3"; + function = "spi0cs3"; + }; + smb3c_pins: smb3c-pins { + groups = "smb3c"; + function = "smb3c"; + }; + smb3b_pins: smb3b-pins { + groups = "smb3b"; + function = "smb3b"; + }; + bmcuart0a_pins: bmcuart0a-pins { + groups = "bmcuart0a"; + function = "bmcuart0a"; + }; + uart1_pins: uart1-pins { + groups = "uart1"; + function = "uart1"; + }; + jtag2_pins: jtag2-pins { + groups = "jtag2"; + function = "jtag2"; + }; + bmcuart1_pins: bmcuart1-pins { + groups = "bmcuart1"; + function = "bmcuart1"; + }; + uart2_pins: uart2-pins { + groups = "uart2"; + function = "uart2"; + }; + bmcuart0b_pins: bmcuart0b-pins { + groups = "bmcuart0b"; + function = "bmcuart0b"; + }; + r1err_pins: r1err-pins { + groups = "r1err"; + function = "r1err"; + }; + r1md_pins: r1md-pins { + groups = "r1md"; + function = "r1md"; + }; + smb3d_pins: smb3d-pins { + groups = "smb3d"; + function = "smb3d"; + }; + fanin0_pins: fanin0-pins { + groups = "fanin0"; + function = "fanin0"; + }; + fanin1_pins: fanin1-pins { + groups = "fanin1"; + function = "fanin1"; + }; + fanin2_pins: fanin2-pins { + groups = "fanin2"; + function = "fanin2"; + }; + fanin3_pins: fanin3-pins { + groups = "fanin3"; + function = "fanin3"; + }; + fanin4_pins: fanin4-pins { + groups = "fanin4"; + function = "fanin4"; + }; + fanin5_pins: fanin5-pins { + groups = "fanin5"; + function = "fanin5"; + }; + fanin6_pins: fanin6-pins { + groups = "fanin6"; + function = "fanin6"; + }; + fanin7_pins: fanin7-pins { + groups = "fanin7"; + function = "fanin7"; + }; + fanin8_pins: fanin8-pins { + groups = "fanin8"; + function = "fanin8"; + }; + fanin9_pins: fanin9-pins { + groups = "fanin9"; + function = "fanin9"; + }; + fanin10_pins: fanin10-pins { + groups = "fanin10"; + function = "fanin10"; + }; + fanin11_pins: fanin11-pins { + groups = "fanin11"; + function = "fanin11"; + }; + fanin12_pins: fanin12-pins { + groups = "fanin12"; + function = "fanin12"; + }; + fanin13_pins: fanin13-pins { + groups = "fanin13"; + function = "fanin13"; + }; + fanin14_pins: fanin14-pins { + groups = "fanin14"; + function = "fanin14"; + }; + fanin15_pins: fanin15-pins { + groups = "fanin15"; + function = "fanin15"; + }; + pwm0_pins: pwm0-pins { + groups = "pwm0"; + function = "pwm0"; + }; + pwm1_pins: pwm1-pins { + groups = "pwm1"; + function = "pwm1"; + }; + pwm2_pins: pwm2-pins { + groups = "pwm2"; + function = "pwm2"; + }; + pwm3_pins: pwm3-pins { + groups = "pwm3"; + function = "pwm3"; + }; + r2_pins: r2-pins { + groups = "r2"; + function = "r2"; + }; + r2err_pins: r2err-pins { + groups = "r2err"; + function = "r2err"; + }; + r2md_pins: r2md-pins { + groups = "r2md"; + function = "r2md"; + }; + ga20kbc_pins: ga20kbc-pins { + groups = "ga20kbc"; + function = "ga20kbc"; + }; + smb5d_pins: smb5d-pins { + groups = "smb5d"; + function = "smb5d"; + }; + lpc_pins: lpc-pins { + groups = "lpc"; + function = "lpc"; + }; + espi_pins: espi-pins { + groups = "espi"; + function = "espi"; + }; + rg1_pins: rg1-pins { + groups = "rg1"; + function = "rg1"; + }; + rg1mdio_pins: rg1mdio-pins { + groups = "rg1mdio"; + function = "rg1mdio"; + }; + rg2_pins: rg2-pins { + groups = "rg2"; + function = "rg2"; + }; + ddr_pins: ddr-pins { + groups = "ddr"; + function = "ddr"; + }; + smb0_pins: smb0-pins { + groups = "smb0"; + function = "smb0"; + }; + smb1_pins: smb1-pins { + groups = "smb1"; + function = "smb1"; + }; + smb2_pins: smb2-pins { + groups = "smb2"; + function = "smb2"; + }; + smb2c_pins: smb2c-pins { + groups = "smb2c"; + function = "smb2c"; + }; + smb2b_pins: smb2b-pins { + groups = "smb2b"; + function = "smb2b"; + }; + smb1c_pins: smb1c-pins { + groups = "smb1c"; + function = "smb1c"; + }; + smb1b_pins: smb1b-pins { + groups = "smb1b"; + function = "smb1b"; + }; + smb8_pins: smb8-pins { + groups = "smb8"; + function = "smb8"; + }; + smb9_pins: smb9-pins { + groups = "smb9"; + function = "smb9"; + }; + smb10_pins: smb10-pins { + groups = "smb10"; + function = "smb10"; + }; + smb11_pins: smb11-pins { + groups = "smb11"; + function = "smb11"; + }; + sd1_pins: sd1-pins { + groups = "sd1"; + function = "sd1"; + }; + sd1pwr_pins: sd1pwr-pins { + groups = "sd1pwr"; + function = "sd1pwr"; + }; + pwm4_pins: pwm4-pins { + groups = "pwm4"; + function = "pwm4"; + }; + pwm5_pins: pwm5-pins { + groups = "pwm5"; + function = "pwm5"; + }; + pwm6_pins: pwm6-pins { + groups = "pwm6"; + function = "pwm6"; + }; + pwm7_pins: pwm7-pins { + groups = "pwm7"; + function = "pwm7"; + }; + mmc8_pins: mmc8-pins { + groups = "mmc8"; + function = "mmc8"; + }; + mmc_pins: mmc-pins { + groups = "mmc"; + function = "mmc"; + }; + mmcwp_pins: mmcwp-pins { + groups = "mmcwp"; + function = "mmcwp"; + }; + mmccd_pins: mmccd-pins { + groups = "mmccd"; + function = "mmccd"; + }; + mmcrst_pins: mmcrst-pins { + groups = "mmcrst"; + function = "mmcrst"; + }; + clkout_pins: clkout-pins { + groups = "clkout"; + function = "clkout"; + }; + serirq_pins: serirq-pins { + groups = "serirq"; + function = "serirq"; + }; + lpcclk_pins: lpcclk-pins { + groups = "lpcclk"; + function = "lpcclk"; + }; + scipme_pins: scipme-pins { + groups = "scipme"; + function = "scipme"; + }; + sci_pins: sci-pins { + groups = "sci"; + function = "sci"; + }; + smb6_pins: smb6-pins { + groups = "smb6"; + function = "smb6"; + }; + smb7_pins: smb7-pins { + groups = "smb7"; + function = "smb7"; + }; + pspi1_pins: pspi1-pins { + groups = "pspi1"; + function = "pspi1"; + }; + faninx_pins: faninx-pins { + groups = "faninx"; + function = "faninx"; + }; + r1_pins: r1-pins { + groups = "r1"; + function = "r1"; + }; + spi3_pins: spi3-pins { + groups = "spi3"; + function = "spi3"; + }; + spi3cs1_pins: spi3cs1-pins { + groups = "spi3cs1"; + function = "spi3cs1"; + }; + spi3quad_pins: spi3quad-pins { + groups = "spi3quad"; + function = "spi3quad"; + }; + spi3cs2_pins: spi3cs2-pins { + groups = "spi3cs2"; + function = "spi3cs2"; + }; + spi3cs3_pins: spi3cs3-pins { + groups = "spi3cs3"; + function = "spi3cs3"; + }; + nprd_smi_pins: nprd-smi-pins { + groups = "nprd_smi"; + function = "nprd_smi"; + }; + smb0b_pins: smb0b-pins { + groups = "smb0b"; + function = "smb0b"; + }; + smb0c_pins: smb0c-pins { + groups = "smb0c"; + function = "smb0c"; + }; + smb0den_pins: smb0den-pins { + groups = "smb0den"; + function = "smb0den"; + }; + smb0d_pins: smb0d-pins { + groups = "smb0d"; + function = "smb0d"; + }; + ddc_pins: ddc-pins { + groups = "ddc"; + function = "ddc"; + }; + rg2mdio_pins: rg2mdio-pins { + groups = "rg2mdio"; + function = "rg2mdio"; + }; + wdog1_pins: wdog1-pins { + groups = "wdog1"; + function = "wdog1"; + }; + wdog2_pins: wdog2-pins { + groups = "wdog2"; + function = "wdog2"; + }; + smb12_pins: smb12-pins { + groups = "smb12"; + function = "smb12"; + }; + smb13_pins: smb13-pins { + groups = "smb13"; + function = "smb13"; + }; + spix_pins: spix-pins { + groups = "spix"; + function = "spix"; + }; + spixcs1_pins: spixcs1-pins { + groups = "spixcs1"; + function = "spixcs1"; + }; + clkreq_pins: clkreq-pins { + groups = "clkreq"; + function = "clkreq"; + }; + hgpio0_pins: hgpio0-pins { + groups = "hgpio0"; + function = "hgpio0"; + }; + hgpio1_pins: hgpio1-pins { + groups = "hgpio1"; + function = "hgpio1"; + }; + hgpio2_pins: hgpio2-pins { + groups = "hgpio2"; + function = "hgpio2"; + }; + hgpio3_pins: hgpio3-pins { + groups = "hgpio3"; + function = "hgpio3"; + }; + hgpio4_pins: hgpio4-pins { + groups = "hgpio4"; + function = "hgpio4"; + }; + hgpio5_pins: hgpio5-pins { + groups = "hgpio5"; + function = "hgpio5"; + }; + hgpio6_pins: hgpio6-pins { + groups = "hgpio6"; + function = "hgpio6"; + }; + hgpio7_pins: hgpio7-pins { + groups = "hgpio7"; + function = "hgpio7"; }; }; }; diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj-gpio.dtsi b/arch/arm/boot/dts/nuvoton-npcm730-gsj-gpio.dtsi new file mode 100644 index 000000000000..53cfd15fa03f --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm730-gsj-gpio.dtsi @@ -0,0 +1,477 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com + +/ { + pinctrl: pinctrl@f0800000 { + gpio0pp_pins: gpio0pp-pins { + pins = "GPIO0/IOX1DI"; + bias-disable; + drive-push-pull; + }; + gpio1pp_pins: gpio1pp-pins { + pins = "GPIO1/IOX1LD"; + bias-disable; + drive-push-pull; + }; + gpio2pp_pins: gpio2pp-pins { + pins = "GPIO2/IOX1CK"; + bias-disable; + drive-push-pull; + }; + gpio3pp_pins: gpio3pp-pins { + pins = "GPIO3/IOX1D0"; + bias-disable; + drive-push-pull; + }; + gpio4pp_pins: gpio4pp-pins { + pins = "GPIO4/IOX2DI/SMB1DSDA"; + bias-disable; + drive-push-pull; + }; + gpio5pp_pins: gpio5pp-pins { + pins = "GPIO5/IOX2LD/SMB1DSCL"; + bias-disable; + drive-push-pull; + }; + gpio6pp_pins: gpio6pp-pins { + pins = "GPIO6/IOX2CK/SMB2DSDA"; + bias-disable; + drive-push-pull; + }; + gpio7pp_pins: gpio7pp-pins { + pins = "GPIO7/IOX2D0/SMB2DSCL"; + bias-disable; + drive-push-pull; + }; + gpio8_pins: gpio8-pins { + pins = "GPIO8/LKGPO1"; + bias-disable; + input-enable; + }; + gpio9_pins: gpio9-pins { + pins = "GPIO9/LKGPO2"; + bias-disable; + input-enable; + }; + gpio10pp_pins: gpio10pp-pins { + pins = "GPIO10/IOXHLD"; + bias-disable; + drive-push-pull; + }; + gpio11pp_pins: gpio11pp-pins { + pins = "GPIO11/IOXHCK"; + bias-disable; + drive-push-pull; + }; + gpio12_pins: gpio12-pins { + pins = "GPIO12/GSPICK/SMB5BSCL"; + bias-disable; + input-enable; + }; + gpio13_pins: gpio13-pins { + pins = "GPIO13/GSPIDO/SMB5BSDA"; + bias-disable; + input-enable; + }; + gpio14_pins: gpio14-pins { + pins = "GPIO14/GSPIDI/SMB5CSCL"; + bias-disable; + input-enable; + }; + gpio15od_pins: gpio15od-pins { + pins = "GPIO15/GSPICS/SMB5CSDA"; + bias-disable; + drive-open-drain; + }; + gpio17pp_pins: gpio17pp-pins { + pins = "GPIO17/PSPI2DI/SMB4DEN"; + bias-disable; + drive-push-pull; + }; + gpio18pp_pins: gpio18pp-pins { + pins = "GPIO18/PSPI2D0/SMB4BSDA"; + bias-disable; + drive-push-pull; + }; + gpio19pp_pins: gpio19pp-pins { + pins = "GPIO19/PSPI2CK/SMB4BSCL"; + bias-disable; + drive-push-pull; + }; + gpio24pp_pins: gpio24pp-pins { + pins = "GPIO24/IOXHDO"; + bias-disable; + drive-push-pull; + }; + gpio25pp_pins: gpio25pp-pins { + pins = "GPIO25/IOXHDI"; + bias-disable; + drive-push-pull; + }; + gpio37od_pins: gpio37od-pins { + pins = "GPIO37/SMB3CSDA"; + bias-disable; + drive-open-drain; + }; + gpio59pp_pins: gpio59pp-pins { + pins = "GPIO59/SMB3DSDA"; + bias-disable; + drive-push-pull; + }; + gpio60_pins: gpio60-pins { + pins = "GPIO60/SMB3DSCL"; + bias-disable; + input-enable; + }; + gpio72od_pins: gpio72od-pins { + pins = "GPIO72/FANIN8"; + bias-disable; + drive-open-drain; + }; + gpio73od_pins: gpio73od-pins { + pins = "GPIO73/FANIN9"; + bias-disable; + drive-open-drain; + }; + gpio74od_pins: gpio74od-pins { + pins = "GPIO74/FANIN10"; + bias-disable; + drive-open-drain; + }; + gpio75od_pins: gpio75od-pins { + pins = "GPIO75/FANIN11"; + bias-disable; + drive-open-drain; + }; + gpio76od_pins: gpio76od-pins { + pins = "GPIO76/FANIN12"; + bias-disable; + drive-open-drain; + }; + gpio77od_pins: gpio77od-pins { + pins = "GPIO77/FANIN13"; + bias-disable; + drive-open-drain; + }; + gpio78od_pins: gpio78od-pins { + pins = "GPIO78/FANIN14"; + bias-disable; + drive-open-drain; + }; + gpio79od_pins: gpio79od-pins { + pins = "GPIO79/FANIN15"; + bias-disable; + drive-open-drain; + }; + gpio83_pins: gpio83-pins { + pins = "GPIO83/PWM3"; + bias-disable; + input-enable; + }; + gpio84pp_pins: gpio84pp-pins { + pins = "GPIO84/R2TXD0"; + bias-disable; + drive-push-pull; + }; + gpio85pp_pins: gpio85pp-pins { + pins = "GPIO85/R2TXD1"; + bias-disable; + drive-push-pull; + }; + gpio86pp_pins: gpio86pp-pins { + pins = "GPIO86/R2TXEN"; + bias-disable; + drive-push-pull; + }; + gpio87pp_pins: gpio87pp-pins { + pins = "GPIO87/R2RXD0"; + bias-disable; + drive-push-pull; + }; + gpio88pp_pins: gpio88pp-pins { + pins = "GPIO88/R2RXD1"; + bias-disable; + drive-push-pull; + }; + gpio89pp_pins: gpio89pp-pins { + pins = "GPIO89/R2CRSDV"; + bias-disable; + drive-push-pull; + }; + gpio90pp_pins: gpio90pp-pins { + pins = "GPIO90/R2RXERR"; + bias-disable; + drive-push-pull; + }; + gpio91_pins: gpio91-pins { + pins = "GPIO91/R2MDC"; + bias-disable; + input-enable; + }; + gpio92_pins: gpio92-pins { + pins = "GPIO92/R2MDIO"; + bias-disable; + input-enable; + }; + gpio93pp_pins: gpio93pp-pins { + pins = "GPIO93/GA20/SMB5DSCL"; + bias-disable; + drive-push-pull; + }; + gpio94pp_pins: gpio94pp-pins { + pins = "GPIO94/nKBRST/SMB5DSDA"; + bias-disable; + drive-push-pull; + }; + gpio95_pins: gpio95-pins { + pins = "GPIO95/nLRESET/nESPIRST"; + bias-disable; + input-enable; + }; + gpio125pp_pins: gpio125pp-pins { + pins = "GPIO125/SMB1CSCL"; + bias-disable; + drive-push-pull; + }; + gpio126od_pins: gpio126od-pins { + pins = "GPIO126/SMB1BSDA"; + bias-disable; + drive-open-drain; + }; + gpio127od_pins: gpio127od-pins { + pins = "GPIO127/SMB1BSCL"; + bias-disable; + drive-open-drain; + }; + gpio136_pins: gpio136-pins { + pins = "GPIO136/SD1DT0"; + bias-disable; + input-enable; + }; + gpio137_pins: gpio137-pins { + pins = "GPIO137/SD1DT1"; + bias-disable; + input-enable; + }; + gpio141_pins: gpio141-pins { + pins = "GPIO141/SD1WP"; + bias-disable; + input-enable; + }; + gpio142od_pins: gpio142od-pins { + pins = "GPIO142/SD1CMD"; + bias-disable; + drive-open-drain; + }; + gpio143ol_pins: gpio143ol-pins { + pins = "GPIO143/SD1CD/SD1PWR"; + bias-disable; + output-low; + }; + gpio144_pins: gpio144-pins { + pins = "GPIO144/PWM4"; + bias-disable; + input-enable; + }; + gpio145_pins: gpio145-pins { + pins = "GPIO145/PWM5"; + bias-disable; + input-enable; + }; + gpio146_pins: gpio146-pins { + pins = "GPIO146/PWM6"; + bias-disable; + input-enable; + }; + gpio147_pins: gpio147-pins { + pins = "GPIO147/PWM7"; + bias-disable; + input-enable; + }; + gpio148_pins: gpio148-pins { + pins = "GPIO148/MMCDT4"; + bias-disable; + input-enable; + }; + gpio149_pins: gpio149-pins { + pins = "GPIO149/MMCDT5"; + bias-disable; + input-enable; + }; + gpio150_pins: gpio150-pins { + pins = "GPIO150/MMCDT6"; + bias-disable; + input-enable; + }; + gpio151_pins: gpio151-pins { + pins = "GPIO151/MMCDT7"; + bias-disable; + input-enable; + }; + gpio152_pins: gpio152-pins { + pins = "GPIO152/MMCCLK"; + bias-disable; + input-enable; + }; + gpio153_pins: gpio153-pins { + pins = "GPIO153/MMCWP"; + bias-disable; + input-enable; + }; + gpio154_pins: gpio154-pins { + pins = "GPIO154/MMCCMD"; + bias-disable; + input-enable; + }; + gpio155_pins: gpio155-pins { + pins = "GPIO155/nMMCCD/nMMCRST"; + bias-disable; + input-enable; + }; + gpio156_pins: gpio156-pins { + pins = "GPIO156/MMCDT0"; + bias-disable; + input-enable; + }; + gpio157_pins: gpio157-pins { + pins = "GPIO157/MMCDT1"; + bias-disable; + input-enable; + }; + gpio158_pins: gpio158-pins { + pins = "GPIO158/MMCDT2"; + bias-disable; + input-enable; + }; + gpio159_pins: gpio159-pins { + pins = "GPIO159/MMCDT3"; + bias-disable; + input-enable; + }; + gpio161_pins: gpio161-pins { + pins = "GPIO161/nLFRAME/nESPICS"; + bias-disable; + input-enable; + }; + gpio162_pins: gpio162-pins { + pins = "GPIO162/SERIRQ"; + bias-disable; + input-enable; + }; + gpio163_pins: gpio163-pins { + pins = "GPIO163/LCLK/ESPICLK"; + bias-disable; + input-enable; + }; + gpio164_pins: gpio164-pins { + pins = "GPIO164/LAD0/ESPI_IO0"; + bias-disable; + input-enable; + }; + gpio165_pins: gpio165-pins { + pins = "GPIO165/LAD1/ESPI_IO1"; + bias-disable; + input-enable; + }; + gpio166_pins: gpio166-pins { + pins = "GPIO166/LAD2/ESPI_IO2"; + bias-disable; + input-enable; + }; + gpio167_pins: gpio167-pins { + pins = "GPIO167/LAD3/ESPI_IO3"; + bias-disable; + input-enable; + }; + gpio168_pins: gpio168-pins { + pins = "GPIO168/nCLKRUN/nESPIALERT"; + bias-disable; + input-enable; + }; + gpio169_pins: gpio169-pins { + pins = "GPIO169/nSCIPME"; + bias-disable; + input-enable; + }; + gpio170_pins: gpio170-pins { + pins = "GPIO170/nSMI"; + bias-disable; + input-enable; + }; + gpio175od_pins: gpio175od-pins { + pins = "GPIO175/PSPI1CK/FANIN19"; + bias-disable; + drive-open-drain; + }; + gpio176od_pins: gpio176od-pins { + pins = "GPIO176/PSPI1DO/FANIN18"; + bias-disable; + drive-open-drain; + }; + gpio177_pins: gpio177-pins { + pins = "GPIO177/PSPI1DI/FANIN17"; + bias-disable; + input-enable; + }; + gpio190od_pins: gpio190od-pins { + pins = "GPIO190/nPRD_SMI"; + bias-disable; + drive-open-drain; + }; + gpio191_pins: gpio191-pins { + pins = "GPIO191"; + bias-disable; + input-enable; + }; + gpio192_pins: gpio192-pins { + pins = "GPIO192"; + bias-disable; + input-enable; + }; + gpio194pp_pins: gpio194pp-pins { + pins = "GPIO194/SMB0BSCL"; + bias-disable; + drive-push-pull; + }; + gpio195od_pins: gpio195od-pins { + pins = "GPIO195/SMB0BSDA"; + bias-disable; + drive-open-drain; + }; + gpio196od_pins: gpio196od-pins { + pins = "GPIO196/SMB0CSCL"; + bias-disable; + drive-open-drain; + }; + gpio197od_pins: gpio197od-pins { + pins = "GPIO197/SMB0DEN"; + bias-disable; + drive-open-drain; + }; + gpio198od_pins: gpio198od-pins { + pins = "GPIO198/SMB0DSDA"; + bias-disable; + drive-open-drain; + }; + gpio199od_pins: gpio199od-pins { + pins = "GPIO199/SMB0DSCL"; + bias-disable; + drive-open-drain; + }; + gpio200pp_pins: gpio200pp-pins { + pins = "GPIO200/R2CK"; + bias-disable; + drive-push-pull; + }; + gpio202od_pins: gpio202od-pins { + pins = "GPIO202/SMB0CSDA"; + bias-disable; + drive-open-drain; + }; + gpio203_pins: gpio203-pins { + pins = "GPIO203/FANIN16"; + bias-disable; + input-enable; + }; + }; +}; diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts new file mode 100644 index 000000000000..d4ff49939a3d --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts @@ -0,0 +1,490 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Quanta Computer lnc. Fran.Hsu@quantatw.com + +/dts-v1/; +#include "nuvoton-npcm730.dtsi" +#include "nuvoton-npcm730-gsj-gpio.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Quanta GSJ Board (Device Tree v12)"; + compatible = "nuvoton,npcm750"; + + aliases { + ethernet1 = &gmac0; + serial3 = &serial3; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c15 = &i2c15; + fiu0 = &fiu0; + }; + + chosen { + stdout-path = &serial3; + }; + + memory { + reg = <0 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-bmc-live { + gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + LED_U2_0_LOCATE { + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_1_LOCATE { + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_2_LOCATE { + gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_3_LOCATE { + gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_4_LOCATE { + gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_5_LOCATE { + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_BMC_TRAY_PWRGD { + gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_7_FAULT { + gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_6_LOCATE { + gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_7_LOCATE { + gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_0_FAULT { + gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_1_FAULT { + gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_2_FAULT { + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_3_FAULT { + gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_4_FAULT { + gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_5_FAULT { + gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + LED_U2_6_FAULT { + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +&fiu0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0cs1_pins>; + status = "okay"; + + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-rx-bus-width = <2>; + + partitions@80000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + bmc@0{ + label = "bmc"; + reg = <0x000000 0x2000000>; + }; + u-boot@0 { + label = "u-boot"; + reg = <0x0000000 0x80000>; + read-only; + }; + u-boot-env@100000{ + label = "u-boot-env"; + reg = <0x00100000 0x40000>; + }; + kernel@200000 { + label = "kernel"; + reg = <0x0200000 0x600000>; + }; + rofs@800000 { + label = "rofs"; + reg = <0x800000 0x1400000>; + }; + rwfs@1c00000 { + label = "rwfs"; + reg = <0x1c00000 0x300000>; + }; + reserved@1f00000 { + label = "reserved"; + reg = <0x1f00000 0x100000>; + }; + }; + }; +}; + +&gmac0 { + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&watchdog1 { + status = "okay"; +}; + +&rng { + status = "okay"; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + lm75@5c { + compatible = "maxim,max31725"; + reg = <0x5c>; + status = "okay"; + }; +}; + +&i2c2 { + status = "okay"; + + lm75@5c { + compatible = "maxim,max31725"; + reg = <0x5c>; + status = "okay"; + }; +}; + +&i2c3 { + status = "okay"; + + lm75@5c { + compatible = "maxim,max31725"; + reg = <0x5c>; + }; +}; + +&i2c4 { + status = "okay"; + + lm75@5c { + compatible = "maxim,max31725"; + reg = <0x5c>; + }; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; + + eeprom@55 { + compatible = "atmel,24c64"; + reg = <0x55>; + }; +}; + +&i2c10 { + status = "okay"; + + eeprom@55 { + compatible = "atmel,24c64"; + reg = <0x55>; + }; +}; + +&i2c11 { + status = "okay"; + + /* P12V Quarter Brick DC/DC Power Module Q54SH12050 @60 */ + power-brick@36 { + compatible = "delta,dps800"; + reg = <0x36>; + }; + + hotswap@15 { + compatible = "ti,lm5066i"; + reg = <0x15>; + }; +}; + +&i2c12 { + status = "okay"; + + ucd90160@6b { + compatible = "ti,ucd90160"; + reg = <0x6b>; + }; +}; + +&i2c15 { + status = "okay"; + + i2c-switch@75 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c-mux-idle-disconnect; + + i2c_u20: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_u21: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_u22: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_u23: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c_u24: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c_u25: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c_u26: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + i2c_u27: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&pwm_fan { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins &pwm1_pins &pwm2_pins + &fanin0_pins &fanin1_pins + &fanin2_pins &fanin3_pins + &fanin4_pins &fanin5_pins>; + status = "okay"; + + fan@0 { + reg = <0x00>; + fan-tach-ch = /bits/ 8 <0x00 0x01>; + cooling-levels = <127 255>; + }; + + fan@1 { + reg = <0x01>; + fan-tach-ch = /bits/ 8 <0x02 0x03>; + cooling-levels = /bits/ 8 <127 255>; + }; + + fan@2 { + reg = <0x02>; + fan-tach-ch = /bits/ 8 <0x04 0x05>; + cooling-levels = /bits/ 8 <127 255>; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = < + /* GPI pins*/ + &gpio8_pins + &gpio9_pins + &gpio12_pins + &gpio13_pins + &gpio14_pins + &gpio60_pins + &gpio83_pins + &gpio91_pins + &gpio92_pins + &gpio95_pins + &gpio136_pins + &gpio137_pins + &gpio141_pins + &gpio144_pins + &gpio145_pins + &gpio146_pins + &gpio147_pins + &gpio148_pins + &gpio149_pins + &gpio150_pins + &gpio151_pins + &gpio152_pins + &gpio153_pins + &gpio154_pins + &gpio155_pins + &gpio156_pins + &gpio157_pins + &gpio158_pins + &gpio159_pins + &gpio161_pins + &gpio162_pins + &gpio163_pins + &gpio164_pins + &gpio165_pins + &gpio166_pins + &gpio167_pins + &gpio168_pins + &gpio169_pins + &gpio170_pins + &gpio177_pins + &gpio191_pins + &gpio192_pins + &gpio203_pins + /* GPO pins*/ + &gpio0pp_pins + &gpio1pp_pins + &gpio2pp_pins + &gpio3pp_pins + &gpio4pp_pins + &gpio5pp_pins + &gpio6pp_pins + &gpio7pp_pins + &gpio10pp_pins + &gpio11pp_pins + &gpio15od_pins + &gpio17pp_pins + &gpio18pp_pins + &gpio19pp_pins + &gpio24pp_pins + &gpio25pp_pins + &gpio37od_pins + &gpio59pp_pins + &gpio72od_pins + &gpio73od_pins + &gpio74od_pins + &gpio75od_pins + &gpio76od_pins + &gpio77od_pins + &gpio78od_pins + &gpio79od_pins + &gpio84pp_pins + &gpio85pp_pins + &gpio86pp_pins + &gpio87pp_pins + &gpio88pp_pins + &gpio89pp_pins + &gpio90pp_pins + &gpio93pp_pins + &gpio94pp_pins + &gpio125pp_pins + &gpio126od_pins + &gpio127od_pins + &gpio142od_pins + &gpio143ol_pins + &gpio175od_pins + &gpio176od_pins + &gpio190od_pins + &gpio194pp_pins + &gpio195od_pins + &gpio196od_pins + &gpio197od_pins + &gpio198od_pins + &gpio199od_pins + &gpio200pp_pins + &gpio202od_pins + >; +}; diff --git a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts new file mode 100644 index 000000000000..82a104b2a65f --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts @@ -0,0 +1,826 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2020 Fii USA Inc. + +/dts-v1/; +#include "nuvoton-npcm730.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Fii Kudo Board"; + compatible = "fii,kudo", "nuvoton,npcm730"; + + aliases { + ethernet1 = &gmac0; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + spi0 = &spi0; + spi1 = &spi1; + fiu0 = &fiu0; + fiu1 = &fiu3; + }; + + chosen { + stdout-path = &serial3; + }; + + memory { + reg = <0 0x40000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>; + }; + + jtag_master { + compatible = "nuvoton,npcm750-jtag-master"; + #address-cells = <1>; + #size-cells = <1>; + + // dev/jtag0 + dev-num = <0>; + // pspi or gpio + mode = "pspi"; + + // pspi2 + pspi-controller = <2>; + reg = <0xf0201000 0x1000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_APB5>; + + // TCK, TDI, TDO, TMS + jtag-gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>, + <&gpio0 18 GPIO_ACTIVE_HIGH>, + <&gpio0 17 GPIO_ACTIVE_HIGH>, + <&gpio0 16 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + heartbeat { + label = "heartbeat"; + gpios = <&gpio0 14 1>; + }; + }; + + pinctrl: pinctrl@f0800000 { + gpio61oh_pins: gpio61oh-pins { + pins = "GPO61/nDTR1_BOUT1/STRAP6"; + bias-disable; + output-high; + }; + gpio62oh_pins: gpio62oh-pins { + pins = "GPO62/nRTST1/STRAP5"; + bias-disable; + output-high; + }; + gpio161ol_pins: gpio161ol-pins { + pins = "GPIO161/nLFRAME/nESPICS"; + bias-disable; + output-low; + }; + gpio163i_pins: gpio163i-pins { + pins = "GPIO163/LCLK/ESPICLK"; + bias-disable; + input-enable; + }; + gpio167ol_pins: gpio167ol-pins { + pins = "GPIO167/LAD3/ESPI_IO3"; + bias-disable; + output-low; + }; + gpio95i_pins: gpio95i-pins { + pins = "GPIO95/nLRESET/nESPIRST"; + bias-disable; + input-enable; + }; + gpio65ol_pins: gpio65ol-pins { + pins = "GPIO65/FANIN1"; + bias-disable; + output-low; + }; + gpio66oh_pins: gpio66oh-pins { + pins = "GPIO66/FANIN2"; + bias-disable; + output-high; + }; + gpio67oh_pins: gpio67oh-pins { + pins = "GPIO67/FANIN3"; + bias-disable; + output-high; + }; + gpio68ol_pins: gpio68ol-pins { + pins = "GPIO68/FANIN4"; + bias-disable; + output-low; + }; + gpio69i_pins: gpio69i-pins { + pins = "GPIO69/FANIN5"; + bias-disable; + input-enable; + }; + gpio70ol_pins: gpio70ol-pins { + pins = "GPIO70/FANIN6"; + bias-disable; + output-low; + }; + gpio71i_pins: gpio71i-pins { + pins = "GPIO71/FANIN7"; + bias-disable; + input-enable; + }; + gpio72i_pins: gpio72i-pins { + pins = "GPIO72/FANIN8"; + bias-disable; + input-enable; + }; + gpio73i_pins: gpio73i-pins { + pins = "GPIO73/FANIN9"; + bias-disable; + input-enable; + }; + gpio74i_pins: gpio74i-pins { + pins = "GPIO74/FANIN10"; + bias-disable; + input-enable; + }; + gpio75i_pins: gpio75i-pins { + pins = "GPIO75/FANIN11"; + bias-disable; + input-enable; + }; + gpio76i_pins: gpio76i-pins { + pins = "GPIO76/FANIN12"; + bias-disable; + input-enable; + }; + gpio77i_pins: gpio77i-pins { + pins = "GPIO77/FANIN13"; + bias-disable; + input-enable; + }; + gpio78i_pins: gpio78i-pins { + pins = "GPIO78/FANIN14"; + bias-disable; + input-enable; + }; + gpio79ol_pins: gpio79ol-pins { + pins = "GPIO79/FANIN15"; + bias-disable; + output-low; + }; + gpio80oh_pins: gpio80oh-pins { + pins = "GPIO80/PWM0"; + bias-disable; + output-high; + }; + gpio81i_pins: gpio81i-pins { + pins = "GPIO81/PWM1"; + bias-disable; + input-enable; + }; + gpio82i_pins: gpio82i-pins { + pins = "GPIO82/PWM2"; + bias-disable; + input-enable; + }; + gpio83i_pins: gpio83i-pins { + pins = "GPIO83/PWM3"; + bias-disable; + input-enable; + }; + gpio144i_pins: gpio144i-pins { + pins = "GPIO144/PWM4"; + bias-disable; + input-enable; + }; + gpio145i_pins: gpio145i-pins { + pins = "GPIO145/PWM5"; + bias-disable; + input-enable; + }; + gpio146i_pins: gpio146i-pins { + pins = "GPIO146/PWM6"; + bias-disable; + input-enable; + }; + gpio147oh_pins: gpio147oh-pins { + pins = "GPIO147/PWM7"; + bias-disable; + output-high; + }; + gpio168ol_pins: gpio168ol-pins { + pins = "GPIO168/nCLKRUN/nESPIALERT"; + bias-disable; + output-low; + }; + gpio169oh_pins: gpio169oh-pins { + pins = "GPIO169/nSCIPME"; + bias-disable; + output-high; + }; + gpio170ol_pins: gpio170ol-pins { + pins = "GPIO170/nSMI"; + bias-disable; + output-low; + }; + gpio218oh_pins: gpio218oh-pins { + pins = "GPIO218/nWDO1"; + bias-disable; + output-high; + }; + gpio37i_pins: gpio37i-pins { + pins = "GPIO37/SMB3CSDA"; + bias-disable; + input-enable; + }; + gpio38i_pins: gpio38i-pins { + pins = "GPIO38/SMB3CSCL"; + bias-disable; + input-enable; + }; + gpio39i_pins: gpio39i-pins { + pins = "GPIO39/SMB3BSDA"; + bias-disable; + input-enable; + }; + gpio40i_pins: gpio40i-pins { + pins = "GPIO40/SMB3BSCL"; + bias-disable; + input-enable; + }; + gpio121i_pins: gpio121i-pins { + pins = "GPIO121/SMB2CSCL"; + bias-disable; + input-enable; + }; + gpio122i_pins: gpio122i-pins { + pins = "GPIO122/SMB2BSDA"; + bias-disable; + input-enable; + }; + gpio123i_pins: gpio123i-pins { + pins = "GPIO123/SMB2BSCL"; + bias-disable; + input-enable; + }; + gpio124i_pins: gpio124i-pins { + pins = "GPIO124/SMB1CSDA"; + bias-disable; + input-enable; + }; + gpio125i_pins: gpio125i-pins { + pins = "GPIO125/SMB1CSCL"; + bias-disable; + input-enable; + }; + gpio126i_pins: gpio126i-pins { + pins = "GPIO126/SMB1BSDA"; + bias-disable; + input-enable; + }; + gpio127i_pins: gpio127i-pins { + pins = "GPIO127/SMB1BSCL"; + bias-disable; + input-enable; + }; + gpio136i_pins: gpio136i-pins { + pins = "GPIO136/SD1DT0"; + bias-disable; + input-enable; + }; + gpio137oh_pins: gpio137oh-pins { + pins = "GPIO137/SD1DT1"; + bias-disable; + output-high; + }; + gpio138i_pins: gpio138i-pins { + pins = "GPIO138/SD1DT2"; + bias-disable; + input-enable; + }; + gpio139i_pins: gpio139i-pins { + pins = "GPIO139/SD1DT3"; + bias-disable; + input-enable; + }; + gpio140i_pins: gpio140i-pins { + pins = "GPIO140/SD1CLK"; + bias-disable; + input-enable; + }; + gpio141i_pins: gpio141i-pins { + pins = "GPIO141/SD1WP"; + bias-disable; + input-enable; + }; + gpio190oh_pins: gpio190oh-pins { + pins = "GPIO190/nPRD_SMI"; + bias-disable; + output-high; + }; + gpio191oh_pins: gpio191oh-pins { + pins = "GPIO191"; + bias-disable; + output-high; + }; + gpio195ol_pins: gpio195ol-pins { + pins = "GPIO195/SMB0BSDA"; + bias-disable; + output-low; + }; + gpio196ol_pins: gpio196ol-pins { + pins = "GPIO196/SMB0CSCL"; + bias-disable; + output-low; + }; + gpio199i_pins: gpio199i-pins { + pins = "GPIO199/SMB0DSCL"; + bias-disable; + input-enable; + }; + gpio202ol_pins: gpio202ol-pins { + pins = "GPIO202/SMB0CSDA"; + bias-disable; + output-low; + }; + }; +}; + +&gmac0 { + phy-mode = "rgmii-id"; + snps,eee-force-disable; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&fiu0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0cs1_pins>; + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <5000000>; + spi-rx-bus-width = <2>; + label = "bmc"; + partitions@80000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + u-boot@0 { + label = "u-boot"; + reg = <0x0000000 0xC0000>; + read-only; + }; + u-boot-env@100000{ + label = "u-boot-env"; + reg = <0x00100000 0x40000>; + }; + kernel@200000 { + label = "kernel"; + reg = <0x0200000 0x600000>; + }; + rofs@800000 { + label = "rofs"; + reg = <0x800000 0x3500000>; + }; + rwfs@3d00000 { + label = "rwfs"; + reg = <0x3d00000 0x300000>; + }; + }; + }; + spi-nor@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; + spi-max-frequency = <5000000>; + spi-rx-bus-width = <2>; + partitions@88000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + spare1@0 { + label = "spi0-cs1-spare1"; + reg = <0x0 0x800000>; + }; + spare2@800000 { + label = "spi0-cs1-spare2"; + reg = <0x800000 0x0>; + }; + }; + }; +}; + +&fiu3 { + pinctrl-0 = <&spi3_pins>; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <5000000>; + spi-rx-bus-width = <2>; + partitions@A0000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + system1@0 { + label = "bios"; + reg = <0x0 0x0>; + }; + system2@800000 { + label = "spi3-system2"; + reg = <0x800000 0x0>; + }; + }; + }; +}; + +&watchdog1 { + status = "okay"; +}; + +&rng { + status = "okay"; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; + +&adc { + #io-channel-cells = <1>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + i2c-switch@75 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c-mux-idle-disconnect; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + // Rear-Fan + max31790@58 { + compatible = "maxim,max31790"; + reg = <0x58>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + // Mid-Fan + max31790@58 { + compatible = "maxim,max31790"; + reg = <0x58>; + }; + }; + + i2c-bus@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + // INLET1_T + lm75@5c { + compatible = "ti,lm75"; + reg = <0x5c>; + }; + }; + + i2c-bus@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + // OUTLET1_T + lm75@5c { + compatible = "ti,lm75"; + reg = <0x5c>; + }; + }; + + i2c-bus@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + + // OUTLET2_T + lm75@5c { + compatible = "ti,lm75"; + reg = <0x5c>; + }; + }; + + i2c-bus@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + // OUTLET3_T + lm75@5c { + compatible = "ti,lm75"; + reg = <0x5c>; + }; + }; + }; + i2c-switch@77 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + i2c-mux-idle-disconnect; + + i2c-bus@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + // STB-T + pmbus@74 { + compatible = "pmbus"; + reg = <0x74>; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + smpro@4f { + compatible = "ampere,smpro"; + reg = <0x4f>; + }; + + smpro@4e { + compatible = "ampere,smpro"; + reg = <0x4e>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + i2c-switch@77 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + i2c-mux-idle-disconnect; + + i2c-bus@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + // ADC sensors + adm1266@40 { + compatible = "adi,adm1266"; + reg = <0x40>; + }; + }; + + i2c-bus@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + // ADC sensors + adm1266@41 { + compatible = "adi,adm1266"; + reg = <0x41>; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; + ssif-bmc@10 { + compatible = "ssif-bmc"; + reg = <0x10>; + }; +}; + +&i2c13 { + status = "okay"; + i2c-switch@77 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + i2c-mux-idle-disconnect; + + i2c-bus@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + // M2_ZONE_T + lm75@28 { + compatible = "ti,lm75"; + reg = <0x28>; + }; + }; + + i2c-bus@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + // BATT_ZONE_T + lm75@29 { + compatible = "ti,lm75"; + reg = <0x29>; + }; + }; + + i2c-bus@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + // NBM1_ZONE_T + lm75@28 { + compatible = "ti,lm75"; + reg = <0x28>; + }; + }; + i2c-bus@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + + // NBM2_ZONE_T + lm75@29 { + compatible = "ti,lm75"; + reg = <0x29>; + }; + }; + }; +}; + +&i2c14 { + status = "okay"; +}; + +&i2c15 { + status = "okay"; +}; + +&spi0 { + cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = < + &gpio61oh_pins + &gpio62oh_pins + &gpio161ol_pins + &gpio163i_pins + &gpio167ol_pins + &gpio95i_pins + &gpio65ol_pins + &gpio66oh_pins + &gpio67oh_pins + &gpio68ol_pins + &gpio69i_pins + &gpio70ol_pins + &gpio71i_pins + &gpio72i_pins + &gpio73i_pins + &gpio74i_pins + &gpio75i_pins + &gpio76i_pins + &gpio77i_pins + &gpio78i_pins + &gpio79ol_pins + &gpio80oh_pins + &gpio81i_pins + &gpio82i_pins + &gpio83i_pins + &gpio144i_pins + &gpio145i_pins + &gpio146i_pins + &gpio147oh_pins + &gpio168ol_pins + &gpio169oh_pins + &gpio170ol_pins + &gpio218oh_pins + &gpio37i_pins + &gpio38i_pins + &gpio39i_pins + &gpio40i_pins + &gpio121i_pins + &gpio122i_pins + &gpio123i_pins + &gpio124i_pins + &gpio125i_pins + &gpio126i_pins + &gpio127i_pins + &gpio136i_pins + &gpio137oh_pins + &gpio138i_pins + &gpio139i_pins + &gpio140i_pins + &gpio141i_pins + &gpio190oh_pins + &gpio191oh_pins + &gpio195ol_pins + &gpio196ol_pins + &gpio199i_pins + &gpio202ol_pins + >; +}; + +&gcr { + serial_port_mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + + mux-reg-masks = <0x38 0x07>; + idle-states = <2>; + }; +}; diff --git a/arch/arm/boot/dts/nuvoton-npcm730.dtsi b/arch/arm/boot/dts/nuvoton-npcm730.dtsi new file mode 100644 index 000000000000..86ec12ec2b50 --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm730.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2020 Nuvoton Technology + +#include "nuvoton-common-npcm7xx.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "nuvoton,npcm750-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + clocks = <&clk NPCM7XX_CLK_CPU>; + clock-names = "clk_cpu"; + reg = <0>; + next-level-cache = <&l2>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + clocks = <&clk NPCM7XX_CLK_CPU>; + clock-names = "clk_cpu"; + reg = <1>; + next-level-cache = <&l2>; + }; + }; + + soc { + timer@3fe600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x3fe600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&clk NPCM7XX_CLK_AHB>; + }; + }; +}; diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts index 15f744f1beea..9f13d08f5804 100644 --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts @@ -4,24 +4,161 @@ /dts-v1/; #include "nuvoton-npcm750.dtsi" +#include "dt-bindings/gpio/gpio.h" +#include "nuvoton-npcm750-pincfg-evb.dtsi" / { model = "Nuvoton npcm750 Development Board (Device Tree)"; compatible = "nuvoton,npcm750"; + aliases { + ethernet2 = &gmac0; + ethernet3 = &gmac1; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + spi0 = &spi0; + spi1 = &spi1; + fiu0 = &fiu0; + fiu1 = &fiu3; + fiu2 = &fiux; + }; + chosen { stdout-path = &serial3; }; memory { - reg = <0 0x40000000>; + device_type = "memory"; + reg = <0x0 0x20000000>; + }; +}; + +&gmac0 { + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&gmac1 { + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&fiu0 { + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-rx-bus-width = <2>; + reg = <0>; + spi-max-frequency = <5000000>; + partitions@80000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + bbuboot1@0 { + label = "bb-uboot-1"; + reg = <0x0000000 0x80000>; + read-only; + }; + bbuboot2@80000 { + label = "bb-uboot-2"; + reg = <0x0080000 0x80000>; + read-only; + }; + envparam@100000 { + label = "env-param"; + reg = <0x0100000 0x40000>; + read-only; + }; + spare@140000 { + label = "spare"; + reg = <0x0140000 0xC0000>; + }; + kernel@200000 { + label = "kernel"; + reg = <0x0200000 0x400000>; + }; + rootfs@600000 { + label = "rootfs"; + reg = <0x0600000 0x700000>; + }; + spare1@D00000 { + label = "spare1"; + reg = <0x0D00000 0x200000>; + }; + spare2@0F00000 { + label = "spare2"; + reg = <0x0F00000 0x200000>; + }; + spare3@1100000 { + label = "spare3"; + reg = <0x1100000 0x200000>; + }; + spare4@1300000 { + label = "spare4"; + reg = <0x1300000 0x0>; + }; + }; + }; +}; + +&fiu3 { + pinctrl-0 = <&spi3_pins>, <&spi3quad_pins>; + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-rx-bus-width = <2>; + reg = <0>; + spi-max-frequency = <5000000>; + partitions@A0000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + system1@0 { + label = "spi3-system1"; + reg = <0x0 0x0>; + }; + }; }; }; +&fiux { + spix-mode; +}; + &watchdog1 { status = "okay"; }; +&rng { + status = "okay"; +}; + &serial0 { status = "okay"; }; @@ -37,3 +174,231 @@ &serial3 { status = "okay"; }; + +&adc { + status = "okay"; +}; + +&lpc_kcs { + kcs1: kcs1@0 { + status = "okay"; + }; + + kcs2: kcs2@0 { + status = "okay"; + }; + + kcs3: kcs3@0 { + status = "okay"; + }; +}; + +/* lm75 on SVB */ +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + lm75@48 { + compatible = "lm75"; + reg = <0x48>; + status = "okay"; + }; +}; + +/* lm75 on EB */ +&i2c1 { + clock-frequency = <100000>; + status = "okay"; + lm75@48 { + compatible = "lm75"; + reg = <0x48>; + status = "okay"; + }; +}; + +/* tmp100 on EB */ +&i2c2 { + clock-frequency = <100000>; + status = "okay"; + tmp100@48 { + compatible = "tmp100"; + reg = <0x48>; + status = "okay"; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c5 { + clock-frequency = <100000>; + status = "okay"; +}; + +/* tmp100 on SVB */ +&i2c6 { + clock-frequency = <100000>; + status = "okay"; + tmp100@48 { + compatible = "tmp100"; + reg = <0x48>; + status = "okay"; + }; +}; + +&i2c7 { + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c8 { + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c9 { + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c10 { + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c11 { + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c14 { + clock-frequency = <100000>; + status = "okay"; +}; + +&pwm_fan { + status = "okay"; + fan@0 { + reg = <0x00>; + fan-tach-ch = /bits/ 8 <0x00 0x01>; + cooling-levels = <127 255>; + }; + fan@1 { + reg = <0x01>; + fan-tach-ch = /bits/ 8 <0x02 0x03>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@2 { + reg = <0x02>; + fan-tach-ch = /bits/ 8 <0x04 0x05>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@3 { + reg = <0x03>; + fan-tach-ch = /bits/ 8 <0x06 0x07>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@4 { + reg = <0x04>; + fan-tach-ch = /bits/ 8 <0x08 0x09>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@5 { + reg = <0x05>; + fan-tach-ch = /bits/ 8 <0x0A 0x0B>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@6 { + reg = <0x06>; + fan-tach-ch = /bits/ 8 <0x0C 0x0D>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@7 { + reg = <0x07>; + fan-tach-ch = /bits/ 8 <0x0E 0x0F>; + cooling-levels = /bits/ 8 <127 255>; + }; +}; + +&spi0 { + cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + status = "okay"; + Flash@0 { + compatible = "winbond,w25q128", + "jedec,spi-nor"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <5000000>; + partition@0 { + label = "spi0_spare1"; + reg = <0x0000000 0x800000>; + }; + partition@1 { + label = "spi0_spare2"; + reg = <0x800000 0x0>; + }; + }; +}; + +&spi1 { + cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + status = "okay"; + Flash@0 { + compatible = "winbond,w25q128fw", + "jedec,spi-nor"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <5000000>; + partition@0 { + label = "spi1_spare1"; + reg = <0x0000000 0x800000>; + }; + partition@1 { + label = "spi1_spare2"; + reg = <0x800000 0x0>; + }; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = < &iox1_pins + &pin8_input + &pin9_output_high + &pin10_input + &pin11_output_high + &pin16_input + &pin24_output_high + &pin25_output_low + &pin32_output_high + &jtag2_pins + &pin61_output_high + &pin62_output_high + &pin63_output_high + &lpc_pins + &pin160_input + &pin162_input + &pin168_input + &pin169_input + &pin170_input + &pin187_output_high + &pin190_input + &pin191_output_high + &pin192_output_high + &pin197_output_low + &ddc_pins + &pin218_input + &pin219_output_low + &pin220_output_low + &pin221_output_high + &pin222_input + &pin223_output_low + &spix_pins + &pin228_output_low + &pin231_output_high + &pin255_input>; +}; + diff --git a/arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi b/arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi new file mode 100644 index 000000000000..3b3806274adf --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018 Nuvoton Technology + +/ { + pinctrl: pinctrl@f0800000 { + pin8_input: pin8-input { + pins = "GPIO8/LKGPO1"; + bias-disable; + input-enable; + }; + pin9_output_high: pin9-output-high { + pins = "GPIO9/LKGPO2"; + bias-disable; + output-high; + }; + pin10_input: pin10-input { + pins = "GPIO10/IOXHLD"; + bias-disable; + input-enable; + }; + pin11_output_high: pin11-output-high { + pins = "GPIO11/IOXHCK"; + bias-disable; + output-high; + }; + pin16_input: pin16-input { + pins = "GPIO16/LKGPO0"; + bias-disable; + input-enable; + }; + pin24_output_high: pin24-output-high { + pins = "GPIO24/IOXHDO"; + bias-disable; + output-high; + }; + pin25_output_low: pin25-output-low { + pins = "GPIO25/IOXHDI"; + bias-disable; + output-low; + }; + pin32_output_high: pin32-output-high { + pins = "GPIO32/nSPI0CS1"; + bias-disable; + output-high; + }; + pin61_output_high: pin61-output-high { + pins = "GPO61/nDTR1_BOUT1/STRAP6"; + bias-disable; + output-high; + }; + pin62_output_high: pin62-output-high { + pins = "GPO62/nRTST1/STRAP5"; + bias-disable; + output-high; + }; + pin63_output_high: pin63-output-high { + pins = "GPO63/TXD1/STRAP4"; + bias-disable; + output-high; + }; + pin160_input: pin160-input { + pins = "GPIO160/CLKOUT/RNGOSCOUT"; + bias-disable; + input-enable; + }; + pin162_input: pin162-input { + pins = "GPIO162/SERIRQ"; + bias-disable; + input-enable; + }; + pin168_input: pin168-input { + pins = "GPIO168/nCLKRUN/nESPIALERT"; + bias-disable; + input-enable; + }; + pin169_input: pin169-input { + pins = "GPIO169/nSCIPME"; + bias-disable; + input-enable; + }; + pin170_input: pin170-input { + pins = "GPIO170/nSMI"; + bias-disable; + input-enable; + }; + pin187_output_high: pin187-output-high { + pins = "GPIO187/nSPI3CS1"; + bias-disable; + output-high; + }; + pin190_input: pin190-input { + pins = "GPIO190/nPRD_SMI"; + bias-disable; + input-enable; + }; + pin191_output_high: pin191-output-high { + pins = "GPIO191"; + bias-disable; + output-high; + }; + pin192_output_high: pin192-output-high { + pins = "GPIO192"; + bias-disable; + output-high; + }; + pin197_output_low: pin197-output-low { + pins = "GPIO197/SMB0DEN"; + bias-disable; + output-low; + }; + pin218_input: pin218-input { + pins = "GPIO218/nWDO1"; + bias-disable; + input-enable; + }; + pin219_output_low: pin219-output-low { + pins = "GPIO219/nWDO2"; + bias-disable; + output-low; + }; + pin220_output_low: pin220-output-low { + pins = "GPIO220/SMB12SCL"; + bias-disable; + output-low; + }; + pin221_output_high: pin221-output-high { + pins = "GPIO221/SMB12SDA"; + bias-disable; + output-high; + }; + pin222_input: pin222-input { + pins = "GPIO222/SMB13SCL"; + bias-disable; + input-enable; + }; + pin223_output_low: pin223-output-low { + pins = "GPIO223/SMB13SDA"; + bias-disable; + output-low; + }; + pin228_output_low: pin228-output-low { + pins = "GPIO228/nSPIXCS1"; + bias-disable; + output-low; + }; + pin231_output_high: pin231-output-high { + pins = "GPIO230/SPIXD3"; + bias-disable; + output-high; + }; + pin255_input: pin255-input { + pins = "GPI255/DACOSEL"; + bias-disable; + input-enable; + }; + }; +}; diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi new file mode 100644 index 000000000000..230cb344b2e1 --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi @@ -0,0 +1,517 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Quanta Computer Inc. Samuel.Jiang@quantatw.com + +/ { + pinctrl: pinctrl@f0800000 { + gpio0ol_pins: gpio0ol-pins { + pins = "GPIO0/IOX1DI"; + bias-disable; + output-low; + }; + gpio1ol_pins: gpio1ol-pins { + pins = "GPIO1/IOX1LD"; + bias-disable; + output-low; + }; + gpio2ol_pins: gpio2ol-pins { + pins = "GPIO2/IOX1CK"; + bias-disable; + output-low; + }; + gpio3ol_pins: gpio3ol-pins { + pins = "GPIO3/IOX1D0"; + bias-disable; + output-low; + }; + gpio5_pins: gpio5-pins { + pins = "GPIO5/IOX2LD/SMB1DSCL"; + bias-disable; + input-enable; + }; + gpio6_pins: gpio6-pins { + pins = "GPIO6/IOX2CK/SMB2DSDA"; + bias-disable; + input-enable; + }; + gpio7_pins: gpio7-pins { + pins = "GPIO7/IOX2D0/SMB2DSCL"; + bias-disable; + input-enable; + }; + gpio8o_pins: gpio8o-pins { + pins = "GPIO8/LKGPO1"; + bias-disable; + output-high; + }; + gpio9ol_pins: gpio9ol-pins { + pins = "GPIO9/LKGPO2"; + bias-disable; + output-low; + }; + gpio10_pins: gpio10-pins { + pins = "GPIO10/IOXHLD"; + bias-disable; + input-enable; + }; + gpio11_pins: gpio11-pins { + pins = "GPIO11/IOXHCK"; + bias-disable; + input-enable; + }; + gpio12ol_pins: gpio12ol-pins { + pins = "GPIO12/GSPICK/SMB5BSCL"; + bias-disable; + output-low; + }; + gpio13ol_pins: gpio13ol-pins { + pins = "GPIO13/GSPIDO/SMB5BSDA"; + bias-disable; + output-low; + }; + gpio14ol_pins: gpio14ol-pins { + pins = "GPIO14/GSPIDI/SMB5CSCL"; + bias-disable; + output-low; + }; + gpio15ol_pins: gpio15ol-pins { + pins = "GPIO15/GSPICS/SMB5CSDA"; + bias-disable; + output-low; + }; + gpio20_pins: gpio20-pins { + pins = "GPIO20/SMB4CSDA/SMB15SDA"; + bias-disable; + input-enable; + }; + gpio21_pins: gpio21-pins { + pins = "GPIO21/SMB4CSCL/SMB15SCL"; + bias-disable; + input-enable; + }; + gpio22o_pins: gpio22o-pins { + pins = "GPIO22/SMB4DSDA/SMB14SDA"; + bias-disable; + output-high; + }; + gpio23_pins: gpio23-pins { + pins = "GPIO23/SMB4DSCL/SMB14SCL"; + bias-disable; + input-enable; + }; + gpio24_pins: gpio24-pins { + pins = "GPIO24/IOXHDO"; + bias-disable; + input-enable; + }; + gpio25_pins: gpio25-pins { + pins = "GPIO25/IOXHDI"; + bias-disable; + input-enable; + }; + gpio30_pins: gpio30-pins { + pins = "GPIO30/SMB3SDA"; + bias-disable; + input-enable; + }; + gpio31_pins: gpio31-pins { + pins = "GPIO31/SMB3SCL"; + bias-disable; + input-enable; + }; + gpio37o_pins: gpio37o-pins { + pins = "GPIO37/SMB3CSDA"; + bias-disable; + output-high; + }; + gpio38_pins: gpio38-pins { + pins = "GPIO38/SMB3CSCL"; + bias-disable; + input-enable; + }; + gpio39_pins: gpio39-pins { + pins = "GPIO39/SMB3BSDA"; + bias-disable; + input-enable; + }; + gpio40o_pins: gpio40o-pins { + pins = "GPIO40/SMB3BSCL"; + bias-disable; + output-high; + }; + gpio59_pins: gpio59-pins { + pins = "GPIO59/SMB3DSDA"; + bias-disable; + input-enable; + }; + gpio76_pins: gpio76-pins { + pins = "GPIO76/FANIN12"; + bias-disable; + input-enable; + }; + gpio77_pins: gpio77-pins { + pins = "GPIO77/FANIN13"; + bias-disable; + input-enable; + }; + gpio78o_pins: gpio78o-pins { + pins = "GPIO78/FANIN14"; + bias-disable; + output-high; + }; + gpio79_pins: gpio79-pins { + pins = "GPIO79/FANIN15"; + bias-disable; + input-enable; + }; + gpio82_pins: gpio82-pins { + pins = "GPIO82/PWM2"; + bias-disable; + input-enable; + }; + gpio83_pins: gpio83-pins { + pins = "GPIO83/PWM3"; + bias-disable; + input-enable; + }; + gpio84_pins: gpio84-pins { + pins = "GPIO84/R2TXD0"; + bias-disable; + input-enable; + }; + gpio85o_pins: gpio85o-pins { + pins = "GPIO85/R2TXD1"; + bias-disable; + output-high; + }; + gpio86ol_pins: gpio86ol-pins { + pins = "GPIO86/R2TXEN"; + bias-disable; + output-low; + }; + gpio87_pins: gpio87-pins { + pins = "GPIO87/R2RXD0"; + bias-disable; + input-enable; + }; + gpio88_pins: gpio88-pins { + pins = "GPIO88/R2RXD1"; + bias-disable; + input-enable; + }; + gpio89_pins: gpio89-pins { + pins = "GPIO89/R2CRSDV"; + bias-disable; + input-enable; + }; + gpio90_pins: gpio90-pins { + pins = "GPIO90/R2RXERR"; + bias-disable; + input-enable; + }; + gpio93_pins: gpio93-pins { + pins = "GPIO93/GA20/SMB5DSCL"; + bias-disable; + input-enable; + }; + gpio94ol_pins: gpio94ol-pins { + pins = "GPIO94/nKBRST/SMB5DSDA"; + bias-disable; + output-low; + }; + gpio108ol_pins: gpio108ol-pins { + pins = "GPIO108/RG1MDC"; + bias-disable; + output-low; + }; + gpio109ol_pins: gpio109ol-pins { + pins = "GPIO109/RG1MDIO"; + bias-disable; + output-low; + }; + gpio110ol_pins: gpio110ol-pins { + pins = "GPIO110/RG2TXD0/DDRV0"; + bias-disable; + output-low; + }; + gpio111ol_pins: gpio111ol-pins { + pins = "GPIO111/RG2TXD1/DDRV1"; + bias-disable; + output-low; + }; + gpio112ol_pins: gpio112ol-pins { + pins = "GPIO112/RG2TXD2/DDRV2"; + bias-disable; + output-low; + }; + gpio113ol_pins: gpio113ol-pins { + pins = "GPIO113/RG2TXD3/DDRV3"; + bias-disable; + output-low; + }; + gpio114o_pins: gpio114o-pins { + pins = "GPIO114/SMB0SCL"; + bias-disable; + output-high; + }; + gpio115_pins: gpio115-pins { + pins = "GPIO115/SMB0SDA"; + bias-disable; + input-enable; + }; + gpio120_pins: gpio120-pins { + pins = "GPIO120/SMB2CSDA"; + bias-disable; + input-enable; + }; + gpio121_pins: gpio121-pins { + pins = "GPIO121/SMB2CSCL"; + bias-disable; + input-enable; + }; + gpio122_pins: gpio122-pins { + pins = "GPIO122/SMB2BSDA"; + bias-disable; + input-enable; + }; + gpio123_pins: gpio123-pins { + pins = "GPIO123/SMB2BSCL"; + bias-disable; + input-enable; + }; + gpio124_pins: gpio124-pins { + pins = "GPIO124/SMB1CSDA"; + bias-disable; + input-enable; + }; + gpio125_pins: gpio125-pins { + pins = "GPIO125/SMB1CSCL"; + bias-disable; + input-enable; + }; + gpio126_pins: gpio126-pins { + pins = "GPIO126/SMB1BSDA"; + bias-disable; + input-enable; + }; + gpio127o_pins: gpio127o-pins { + pins = "GPIO127/SMB1BSCL"; + bias-disable; + output-high; + }; + gpio136_pins: gpio136-pins { + pins = "GPIO136/SD1DT0"; + bias-disable; + input-enable; + }; + gpio137_pins: gpio137-pins { + pins = "GPIO137/SD1DT1"; + bias-disable; + input-enable; + }; + gpio138_pins: gpio138-pins { + pins = "GPIO138/SD1DT2"; + bias-disable; + input-enable; + }; + gpio139_pins: gpio139-pins { + pins = "GPIO139/SD1DT3"; + bias-disable; + input-enable; + }; + gpio140_pins: gpio140-pins { + pins = "GPIO140/SD1CLK"; + bias-disable; + input-enable; + }; + gpio141_pins: gpio141-pins { + pins = "GPIO141/SD1WP"; + bias-disable; + input-enable; + }; + gpio142_pins: gpio142-pins { + pins = "GPIO142/SD1CMD"; + bias-disable; + input-enable; + }; + gpio143_pins: gpio143-pins { + pins = "GPIO143/SD1CD/SD1PWR"; + bias-disable; + input-enable; + }; + gpio144_pins: gpio144-pins { + pins = "GPIO144/PWM4"; + bias-disable; + input-enable; + }; + gpio145_pins: gpio145-pins { + pins = "GPIO145/PWM5"; + bias-disable; + input-enable; + }; + gpio146_pins: gpio146-pins { + pins = "GPIO146/PWM6"; + bias-disable; + input-enable; + }; + gpio147_pins: gpio147-pins { + pins = "GPIO147/PWM7"; + bias-disable; + input-enable; + }; + gpio153o_pins: gpio153o-pins { + pins = "GPIO153/MMCWP"; + bias-disable; + output-high; + }; + gpio155_pins: gpio155-pins { + pins = "GPIO155/nMMCCD/nMMCRST"; + bias-disable; + input-enable; + }; + gpio160o_pins: gpio160o-pins { + pins = "GPIO160/CLKOUT/RNGOSCOUT"; + bias-disable; + output-high; + }; + gpio169o_pins: gpio169o-pins { + pins = "GPIO169/nSCIPME"; + bias-disable; + output-high; + }; + gpio188o_pins: gpio188o-pins { + pins = "GPIO188/SPI3D2/nSPI3CS2"; + bias-disable; + output-high; + }; + gpio189_pins: gpio189-pins { + pins = "GPIO189/SPI3D3/nSPI3CS3"; + bias-disable; + input-enable; + }; + gpio196_pins: gpio196-pins { + pins = "GPIO196/SMB0CSCL"; + bias-disable; + input-enable; + }; + gpio197_pins: gpio197-pins { + pins = "GPIO197/SMB0DEN"; + bias-disable; + input-enable; + }; + gpio198o_pins: gpio198o-pins { + pins = "GPIO198/SMB0DSDA"; + bias-disable; + output-high; + }; + gpio199o_pins: gpio199o-pins { + pins = "GPIO199/SMB0DSCL"; + bias-disable; + output-high; + }; + gpio200_pins: gpio200-pins { + pins = "GPIO200/R2CK"; + input-enable; + bias-disable; + }; + gpio202_pins: gpio202-pins { + pins = "GPIO202/SMB0CSDA"; + bias-disable; + input-enable; + }; + gpio203o_pins: gpio203o-pins { + pins = "GPIO203/FANIN16"; + bias-disable; + output-high; + }; + gpio208_pins: gpio208-pins { + pins = "GPIO208/RG2TXC/DVCK"; + bias-disable; + input-enable; + }; + gpio209ol_pins: gpio209ol-pins { + pins = "GPIO209/RG2TXCTL/DDRV4"; + bias-disable; + output-low; + }; + gpio210ol_pins: gpio210ol-pins { + pins = "GPIO210/RG2RXD0/DDRV5"; + bias-disable; + output-low; + }; + gpio211ol_pins: gpio211ol-pins { + pins = "GPIO211/RG2RXD1/DDRV6"; + bias-disable; + output-low; + }; + gpio212ol_pins: gpio212ol-pins { + pins = "GPIO212/RG2RXD2/DDRV7"; + bias-disable; + output-low; + }; + gpio213ol_pins: gpio213ol-pins { + pins = "GPIO213/RG2RXD3/DDRV8"; + bias-disable; + output-low; + }; + gpio214ol_pins: gpio214ol-pins { + pins = "GPIO214/RG2RXC/DDRV9"; + bias-disable; + output-low; + }; + gpio215ol_pins: gpio215ol-pins { + pins = "GPIO215/RG2RXCTL/DDRV10"; + bias-disable; + output-low; + }; + gpio216ol_pins: gpio216ol-pins { + pins = "GPIO216/RG2MDC/DDRV11"; + bias-disable; + output-low; + }; + gpio217ol_pins: gpio217ol-pins { + pins = "GPIO217/RG2MDIO/DVHSYNC"; + bias-disable; + output-low; + }; + gpio224_pins: gpio224-pins { + pins = "GPIO224/SPIXCK"; + bias-disable; + input-enable; + }; + gpio225ol_pins: gpio225ol-pins { + pins = "GPO225/SPIXD0/STRAP12"; + bias-disable; + output-low; + }; + gpio226ol_pins: gpio226ol-pins { + pins = "GPO226/SPIXD1/STRAP13"; + bias-disable; + output-low; + }; + gpio227ol_pins: gpio227ol-pins { + pins = "GPIO227/nSPIXCS0"; + bias-disable; + output-low; + }; + gpio228o_pins: gpio228ol-pins { + pins = "GPIO228/nSPIXCS1"; + bias-disable; + output-high; + }; + gpio229o_pins: gpio229o-pins { + pins = "GPO229/SPIXD2/STRAP3"; + bias-disable; + output-high; + }; + gpio230_pins: gpio230-pins { + pins = "GPIO230/SPIXD3"; + bias-disable; + input-enable; + }; + gpio231o_pins: gpio231o-pins { + pins = "GPIO231/nCLKREQ"; + bias-disable; + output-high; + }; + }; +}; diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts new file mode 100644 index 000000000000..767e0ac0df7c --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts @@ -0,0 +1,1052 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Nuvoton Technology <kwliu@nuvoton.com> +// Copyright (c) 2019 Quanta Computer Inc. <Samuel.Jiang@quantatw.com> + +/dts-v1/; +#include "nuvoton-npcm750.dtsi" +#include "nuvoton-npcm750-runbmc-olympus-pincfg.dtsi" + +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Nuvoton npcm750 RunBMC Olympus"; + compatible = "nuvoton,npcm750"; + + aliases { + ethernet1 = &gmac0; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + spi0 = &spi0; + spi1 = &spi1; + fiu0 = &fiu0; + fiu1 = &fiu3; + }; + + chosen { + stdout-path = &serial3; + }; + + memory { + reg = <0 0x40000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>; + }; + + leds { + compatible = "gpio-leds"; + heartbeat { + label = "heartbeat"; + gpios = <&gpio3 14 1>; + }; + + identify { + label = "identify"; + gpios = <&gpio3 15 1>; + }; + }; + + jtag { + compatible = "nuvoton,npcm750-jtag"; + enable_pspi_jtag = <1>; + pspi-index = <2>; + tck { + label = "tck"; + gpios = <&gpio0 19 0>; /* gpio19 */ + regbase = <0xf0010000 0x1000>; + }; + + tdi { + label = "tdi"; + gpios = <&gpio0 18 0>; /* gpio18 */ + regbase = <0xf0010000 0x1000>; + }; + + tdo { + label = "tdo"; + gpios = <&gpio0 17 0>; /* gpio17 */ + regbase = <0xf0010000 0x1000>; + }; + tms { + label = "tms"; + gpios = <&gpio0 16 0>; /* gpio16 */ + regbase = <0xf0010000 0x1000>; + }; + }; +}; + +&fiu0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0cs1_pins>; + status = "okay"; + + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-rx-bus-width = <2>; + + partitions@80000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + bmc@0{ + label = "bmc"; + reg = <0x000000 0x2000000>; + }; + u-boot@0 { + label = "u-boot"; + reg = <0x0000000 0x80000>; + read-only; + }; + u-boot-env@100000{ + label = "u-boot-env"; + reg = <0x00100000 0x40000>; + }; + kernel@200000 { + label = "kernel"; + reg = <0x0200000 0x600000>; + }; + rofs@800000 { + label = "rofs"; + reg = <0x800000 0x1500000>; + }; + rwfs@1d00000 { + label = "rwfs"; + reg = <0x1d00000 0x300000>; + }; + }; + }; + + spi-nor@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; + npcm,fiu-rx-bus-width = <2>; + + partitions@88000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + spare1@0 { + label = "spi0-cs1-spare1"; + reg = <0x0 0x800000>; + }; + spare2@800000 { + label = "spi0-cs1-spare2"; + reg = <0x800000 0x0>; + }; + }; + }; +}; + +&fiu3 { + pinctrl-0 = <&spi3_pins>; + status = "okay"; + + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-rx-bus-width = <2>; + + partitions@A0000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + system1@0 { + label = "spi3-system1"; + reg = <0x0 0x800000>; + }; + system2@800000 { + label = "spi3-system2"; + reg = <0x800000 0x0>; + }; + }; + }; +}; + +&gcr { + mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + + mux-reg-masks = <0x38 0x07>; + idle-states = <6>; + }; +}; + +&gmac0 { + phy-mode = "rgmii-id"; + snps,eee-force-disable; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c_slot1a: i2c-bus@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_slot1b: i2c-bus@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_slot2a: i2c-bus@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_slot2b: i2c-bus@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c_slot3: i2c-bus@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c_slot4: i2c-bus@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c_slot5: i2c-bus@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + }; + + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c_m2_s1: i2c-bus@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_m2_s2: i2c-bus@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c_m2_s3: i2c-bus@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_m2_s4: i2c-bus@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c2 { + status = "okay"; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + + power-supply@58 { + compatible = "delta,dps800"; + reg = <0x58>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; +}; + +&i2c5 { + status = "okay"; + + i2c-slave-mqueue@10 { + compatible = "i2c-slave-mqueue"; + reg = <(I2C_OWN_SLAVE_ADDRESS | 0x10)>; + }; +}; + +&i2c6 { + status = "okay"; + + ina219@40 { + compatible = "ti,ina219"; + reg = <0x40>; + }; + ina219@41 { + compatible = "ti,ina219"; + reg = <0x41>; + }; + ina219@44 { + compatible = "ti,ina219"; + reg = <0x44>; + }; + ina219@45 { + compatible = "ti,ina219"; + reg = <0x45>; + }; + tps53679@60 { + compatible = "ti,tps53679"; + reg = <0x60>; + }; + tps53659@62 { + compatible = "ti,tps53659"; + reg = <0x62>; + }; + tps53659@64 { + compatible = "ti,tps53659"; + reg = <0x64>; + }; + tps53622@67 { + compatible = "ti,tps53622"; + reg = <0x67>; + }; + tps53622@69 { + compatible = "ti,tps53622"; + reg = <0x69>; + }; + tps53679@70 { + compatible = "ti,tps53679"; + reg = <0x70>; + }; + tps53659@72 { + compatible = "ti,tps53659"; + reg = <0x72>; + }; + tps53659@74 { + compatible = "ti,tps53659"; + reg = <0x74>; + }; + tps53622@77 { + compatible = "ti,tps53622"; + reg = <0x77>; + }; +}; + +&i2c7 { + status = "okay"; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; +}; + +&i2c8 { + status = "okay"; + + adm1278@11 { + compatible = "adm1278"; + reg = <0x11>; + Rsense = <500>; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; + + gpio: pca9555@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c11 { + status = "okay"; + + pca9539_g1a: pca9539-g1a@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; + reset-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; + G1A_P0_0 { + gpio-hog; + gpios = <0 0>; + output-high; + line-name = "TPM_BMC_ALERT_N"; + }; + G1A_P0_1 { + gpio-hog; + gpios = <1 0>; + input; + line-name = "FM_BIOS_TOP_SWAP"; + }; + G1A_P0_2 { + gpio-hog; + gpios = <2 0>; + input; + line-name = "FM_BIOS_PREFRB2_GOOD"; + }; + G1A_P0_3 { + gpio-hog; + gpios = <3 0>; + input; + line-name = "BMC_SATAXPCIE_0TO3_SEL"; + }; + G1A_P0_4 { + gpio-hog; + gpios = <4 0>; + input; + line-name = "BMC_SATAXPCIE_4TO7_SEL"; + }; + G1A_P0_5 { + gpio-hog; + gpios = <5 0>; + output-low; + line-name = "FM_UV_ADR_TRIGGER_EN_N"; + }; + G1A_P0_6 { + gpio-hog; + gpios = <6 0>; + input; + line-name = "RM_THROTTLE_EN_N"; + }; + G1A_P1_0 { + gpio-hog; + gpios = <8 0>; + input; + line-name = "FM_BMC_TPM_PRES_N"; + }; + G1A_P1_1 { + gpio-hog; + gpios = <9 0>; + input; + line-name = "FM_CPU0_SKTOCC_LVT3_N"; + }; + G1A_P1_2 { + gpio-hog; + gpios = <10 0>; + input; + line-name = "FM_CPU1_SKTOCC_LVT3_N"; + }; + G1A_P1_3 { + gpio-hog; + gpios = <11 0>; + input; + line-name = "PSU1_ALERT_N"; + }; + G1A_P1_4 { + gpio-hog; + gpios = <12 0>; + input; + line-name = "PSU2_ALERT_N"; + }; + G1A_P1_5 { + gpio-hog; + gpios = <13 0>; + input; + line-name = "H_CPU0_FAST_WAKE_LVT3_N"; + }; + G1A_P1_6 { + gpio-hog; + gpios = <14 0>; + output-high; + line-name = "I2C_MUX1_RESET_N"; + }; + G1A_P1_7 { + gpio-hog; + gpios = <15 0>; + input; + line-name = "FM_CPU_CATERR_LVT3_N"; + }; + }; + + pca9539_g1b: pca9539-g1b@75 { + compatible = "nxp,pca9539"; + reg = <0x75>; + gpio-controller; + #gpio-cells = <2>; + G1B_P0_0 { + gpio-hog; + gpios = <0 0>; + input; + line-name = "PVDDQ_ABC_PINALERT_N"; + }; + G1B_P0_1 { + gpio-hog; + gpios = <1 0>; + input; + line-name = "PVDDQ_DEF_PINALERT_N"; + }; + G1B_P0_2 { + gpio-hog; + gpios = <2 0>; + input; + line-name = "PVDDQ_GHJ_PINALERT_N"; + }; + G1B_P0_3 { + gpio-hog; + gpios = <3 0>; + input; + line-name = "PVDDQ_KLM_PINALERT_N"; + }; + G1B_P0_5 { + gpio-hog; + gpios = <5 0>; + input; + line-name = "FM_BOARD_REV_ID0"; + }; + G1B_P0_6 { + gpio-hog; + gpios = <6 0>; + input; + line-name = "FM_BOARD_REV_ID1"; + }; + G1B_P0_7 { + gpio-hog; + gpios = <7 0>; + input; + line-name = "FM_BOARD_REV_ID2"; + }; + G1B_P1_0 { + gpio-hog; + gpios = <8 0>; + input; + line-name = "FM_OC_DETECT_EN_N"; + }; + G1B_P1_1 { + gpio-hog; + gpios = <9 0>; + input; + line-name = "FM_FLASH_DESC_OVERRIDE"; + }; + G1B_P1_2 { + gpio-hog; + gpios = <10 0>; + output-low; + line-name = "FP_PWR_ID_LED_N"; + }; + G1B_P1_3 { + gpio-hog; + gpios = <11 0>; + output-low; + line-name = "BMC_LED_PWR_GRN"; + }; + G1B_P1_4 { + gpio-hog; + gpios = <12 0>; + output-low; + line-name = "BMC_LED_PWR_AMBER"; + }; + G1B_P1_5 { + gpio-hog; + gpios = <13 0>; + output-high; + line-name = "FM_BMC_FAULT_LED_N"; + }; + G1B_P1_6 { + gpio-hog; + gpios = <14 0>; + output-high; + line-name = "FM_CPLD_BMC_PWRDN_N"; + }; + G1B_P1_7 { + gpio-hog; + gpios = <15 0>; + output-high; + line-name = "BMC_LED_CATERR_N"; + }; + }; +}; + +&i2c12 { + status = "okay"; + + pca9539_g2a: pca9539-g2a@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; + reset-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>; + G2A_P0_0 { + gpio-hog; + gpios = <0 0>; + output-high; + line-name = "BMC_PON_RST_REQ_N"; + }; + G2A_P0_1 { + gpio-hog; + gpios = <1 0>; + output-high; + line-name = "BMC_RST_IND_REQ_N"; + }; + G2A_P0_2 { + gpio-hog; + gpios = <2 0>; + input; + line-name = "RST_BMC_RTCRST"; + }; + G2A_P0_3 { + gpio-hog; + gpios = <3 0>; + output-high; + line-name = "FM_BMC_PWRBTN_OUT_N"; + }; + G2A_P0_4 { + gpio-hog; + gpios = <4 0>; + output-high; + line-name = "RST_BMC_SYSRST_BTN_OUT_N"; + }; + G2A_P0_5 { + gpio-hog; + gpios = <5 0>; + output-high; + line-name = "FM_BATTERY_SENSE_EN_N"; + }; + G2A_P0_6 { + gpio-hog; + gpios = <6 0>; + output-high; + line-name = "FM_BMC_READY_N"; + }; + G2A_P0_7 { + gpio-hog; + gpios = <7 0>; + input; + line-name = "IRQ_BMC_PCH_SMI_LPC_N"; + }; + G2A_P1_0 { + gpio-hog; + gpios = <8 0>; + input; + line-name = "FM_SLOT4_CFG0"; + }; + G2A_P1_1 { + gpio-hog; + gpios = <9 0>; + input; + line-name = "FM_SLOT4_CFG1"; + }; + G2A_P1_2 { + gpio-hog; + gpios = <10 0>; + input; + line-name = "FM_NVDIMM_EVENT_N"; + }; + G2A_P1_3 { + gpio-hog; + gpios = <11 0>; + input; + line-name = "PSU1_BLADE_EN_N"; + }; + G2A_P1_4 { + gpio-hog; + gpios = <12 0>; + input; + line-name = "BMC_PCH_FNM"; + }; + G2A_P1_5 { + gpio-hog; + gpios = <13 0>; + input; + line-name = "FM_SOL_UART_CH_SEL"; + }; + G2A_P1_6 { + gpio-hog; + gpios = <14 0>; + input; + line-name = "FM_BIOS_POST_CMPLT_N"; + }; + }; + + pca9539_g2b: pca9539-g2b@75 { + compatible = "nxp,pca9539"; + reg = <0x75>; + gpio-controller; + #gpio-cells = <2>; + G2B_P0_0 { + gpio-hog; + gpios = <0 0>; + input; + line-name = "FM_CPU_MSMI_LVT3_N"; + }; + G2B_P0_1 { + gpio-hog; + gpios = <1 0>; + input; + line-name = "FM_BIOS_MRC_DEBUG_MSG_DIS"; + }; + G2B_P0_2 { + gpio-hog; + gpios = <2 0>; + input; + line-name = "FM_CPU1_DISABLE_BMC_N"; + }; + G2B_P0_3 { + gpio-hog; + gpios = <3 0>; + output-low; + line-name = "BMC_JTAG_SELECT"; + }; + G2B_P0_4 { + gpio-hog; + gpios = <4 0>; + output-high; + line-name = "PECI_MUX_SELECT"; + }; + G2B_P0_5 { + gpio-hog; + gpios = <5 0>; + output-high; + line-name = "I2C_MUX2_RESET_N"; + }; + G2B_P0_6 { + gpio-hog; + gpios = <6 0>; + input; + line-name = "FM_BMC_CPLD_PSU2_ON"; + }; + G2B_P0_7 { + gpio-hog; + gpios = <7 0>; + output-high; + line-name = "PSU2_ALERT_EN_N"; + }; + G2B_P1_0 { + gpio-hog; + gpios = <8 0>; + output-high; + line-name = "FM_CPU_BMC_INIT"; + }; + G2B_P1_1 { + gpio-hog; + gpios = <9 0>; + output-high; + line-name = "IRQ_BMC_PCH_SCI_LPC_N"; + }; + G2B_P1_2 { + gpio-hog; + gpios = <10 0>; + output-low; + line-name = "PMB_ALERT_EN_N"; + }; + G2B_P1_3 { + gpio-hog; + gpios = <11 0>; + output-high; + line-name = "FM_FAST_PROCHOT_EN_N"; + }; + G2B_P1_4 { + gpio-hog; + gpios = <12 0>; + output-high; + line-name = "BMC_NVDIMM_PRSNT_N"; + }; + G2B_P1_5 { + gpio-hog; + gpios = <13 0>; + output-low; + line-name = "FM_BACKUP_BIOS_SEL_H_BMC"; + }; + G2B_P1_6 { + gpio-hog; + gpios = <14 0>; + output-high; + line-name = "FM_PWRBRK_N"; + }; + }; +}; + +&i2c13 { + status = "okay"; + + tmp75@4a { + compatible = "ti,tmp75"; + reg = <0x4a>; + status = "okay"; + }; + m24128_fru@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + pagesize = <64>; + status = "okay"; + }; +}; + +&pwm_fan { + pinctrl-names = "default"; + pinctrl-0 = < &pwm0_pins &pwm1_pins + &fanin0_pins &fanin1_pins + &fanin2_pins &fanin3_pins + &fanin4_pins &fanin5_pins + &fanin6_pins &fanin7_pins + &fanin8_pins &fanin9_pins + &fanin10_pins &fanin11_pins>; + status = "okay"; + + fan@0 { + reg = <0x00>; + fan-tach-ch = /bits/ 8 <0x00 0x01>; + cooling-levels = <127 255>; + }; + fan@1 { + reg = <0x01>; + fan-tach-ch = /bits/ 8 <0x02 0x03>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@2 { + reg = <0x02>; + fan-tach-ch = /bits/ 8 <0x04 0x05>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@3 { + reg = <0x03>; + fan-tach-ch = /bits/ 8 <0x06 0x07>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@4 { + reg = <0x04>; + fan-tach-ch = /bits/ 8 <0x08 0x09>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@5 { + reg = <0x05>; + fan-tach-ch = /bits/ 8 <0x0A 0x0B>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@6 { + reg = <0x06>; + fan-tach-ch = /bits/ 8 <0x0C 0x0D>; + cooling-levels = /bits/ 8 <127 255>; + }; + fan@7 { + reg = <0x07>; + fan-tach-ch = /bits/ 8 <0x0E 0x0F>; + cooling-levels = /bits/ 8 <127 255>; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&watchdog1 { + status = "okay"; +}; + +&rng { + status = "okay"; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; + +&adc { + #io-channel-cells = <1>; + status = "okay"; +}; + +&kcs1 { + status = "okay"; +}; + +&kcs2 { + status = "okay"; +}; + +&kcs3 { + status = "okay"; +}; + +&spi0 { + cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = < + /******* RunBMC inside Module pins *******/ + &gpio0ol_pins + &gpio1ol_pins + &gpio2ol_pins + &gpio3ol_pins + &gpio8o_pins + &gpio9ol_pins + &gpio12ol_pins + &gpio13ol_pins + &gpio14ol_pins + &gpio15ol_pins + &gpio37o_pins + &gpio38_pins + &gpio39_pins + &gpio94ol_pins + &gpio108ol_pins + &gpio109ol_pins + &gpio111ol_pins + &gpio112ol_pins + &gpio113ol_pins + &gpio208_pins + &gpio209ol_pins + &gpio210ol_pins + &gpio211ol_pins + &gpio212ol_pins + &gpio213ol_pins + &gpio214ol_pins + &gpio215ol_pins + &gpio216ol_pins + &gpio217ol_pins + /******* RunBMC outside Connector pins *******/ + &gpio5_pins + &gpio6_pins + &gpio7_pins + &gpio10_pins + &gpio11_pins + &gpio20_pins + &gpio21_pins + &gpio22o_pins + &gpio23_pins + &gpio24_pins + &gpio25_pins + &gpio30_pins + &gpio31_pins + &gpio40o_pins + &gpio59_pins + &gpio76_pins + &gpio77_pins + &gpio78o_pins + &gpio79_pins + &gpio82_pins + &gpio83_pins + &gpio84_pins + &gpio85o_pins + &gpio86ol_pins + &gpio87_pins + &gpio88_pins + &gpio89_pins + &gpio90_pins + &gpio93_pins + &gpio114o_pins + &gpio115_pins + &gpio120_pins + &gpio121_pins + &gpio122_pins + &gpio123_pins + &gpio124_pins + &gpio125_pins + &gpio126_pins + &gpio127o_pins + &gpio136_pins + &gpio137_pins + &gpio138_pins + &gpio139_pins + &gpio140_pins + &gpio141_pins + &gpio142_pins + &gpio143_pins + &gpio144_pins + &gpio146_pins + &gpio145_pins + &gpio147_pins + &gpio153o_pins + &gpio155_pins + &gpio160o_pins + &gpio169o_pins + &gpio188o_pins + &gpio189_pins + &gpio196_pins + &gpio197_pins + &gpio198o_pins + &gpio199o_pins + &gpio200_pins + &gpio202_pins + &gpio203o_pins + &gpio224_pins + &gpio225ol_pins + &gpio226ol_pins + &gpio227ol_pins + &gpio228o_pins + &gpio229o_pins + &gpio230_pins + &gpio231o_pins + &ddc_pins + &wdog1_pins + &wdog2_pins + >; +}; diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi index 6ac340533587..13eee0fe5642 100644 --- a/arch/arm/boot/dts/nuvoton-npcm750.dtsi +++ b/arch/arm/boot/dts/nuvoton-npcm750.dtsi @@ -17,7 +17,7 @@ cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; - clocks = <&clk 0>; + clocks = <&clk NPCM7XX_CLK_CPU>; clock-names = "clk_cpu"; reg = <0>; next-level-cache = <&l2>; @@ -26,19 +26,37 @@ cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; - clocks = <&clk 0>; + clocks = <&clk NPCM7XX_CLK_CPU>; clock-names = "clk_cpu"; reg = <1>; next-level-cache = <&l2>; }; }; + soc { timer@3fe600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x3fe600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&clk 5>; + clocks = <&clk NPCM7XX_CLK_AHB>; + }; + }; + + ahb { + gmac1: eth@f0804000 { + device_type = "network"; + compatible = "snps,dwmac"; + reg = <0xf0804000 0x2000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + ethernet = <1>; + clocks = <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>; + clock-names = "stmmaceth", "clk_gmac"; + pinctrl-names = "default"; + pinctrl-0 = <&rg2_pins + &rg2mdio_pins>; + status = "disabled"; }; }; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 252507cf300b..a858ebfa1500 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -34,26 +34,26 @@ clock-frequency = <26000000>; }; - leds { + led-controller-1 { compatible = "gpio-leds"; - heartbeat { + led-1 { label = "beagleboard::usr0"; gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */ linux,default-trigger = "heartbeat"; }; - mmc { + led-2 { label = "beagleboard::usr1"; gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */ linux,default-trigger = "mmc0"; }; }; - pwmleds { + led-controller-2 { compatible = "pwm-leds"; - pmu_stat { + led-3 { label = "beagleboard::pmu_stat"; pwms = <&twl_pwmled 1 7812500>; max-brightness = <127>; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index 971d3e250515..006a6d97231c 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -14,10 +14,10 @@ reg = <0 0>; }; - pwmleds { + led-controller { compatible = "pwm-leds"; - overo { + led-1 { label = "overo:blue:COM"; pwms = <&twl_pwmled 1 7812500>; max-brightness = <127>; diff --git a/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts b/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts index ba5c35b7027d..ccf03a743678 100644 --- a/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts +++ b/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts @@ -7,3 +7,49 @@ model = "Motorola Droid Bionic XT875"; compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4"; }; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < + MATRIX_KEY(5, 0, KEY_VOLUMEUP) + MATRIX_KEY(3, 0, KEY_VOLUMEDOWN) + >; +}; + +&i2c1 { + led-controller@38 { + compatible = "ti,lm3532"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x38>; + + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + + ramp-up-us = <1024>; + ramp-down-us = <8193>; + + backlight_led: led@0 { + reg = <0>; + led-sources = <2>; + ti,led-mode = <0>; + label = ":backlight"; + }; + }; +}; + +&i2c4 { + kxtf9: accelerometer@f { + compatible = "kionix,kxtf9"; + reg = <0x0f>; + + vdd-supply = <&vhvio>; + + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + + rotation-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "1"; + }; +}; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index c0d2fd92aea3..3ea4c5b9fd31 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -4,6 +4,149 @@ #include "motorola-mapphone-common.dtsi" / { + gpio_keys { + compatible = "gpio-keys"; + + volume_down { + label = "Volume Down"; + gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */ + linux,code = <KEY_VOLUMEDOWN>; + linux,can-disable; + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; + }; + + slider { + label = "Keypad Slide"; + gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */ + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + linux,can-disable; + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; + }; + }; +}; + +/ { model = "Motorola Droid 4 XT894"; compatible = "motorola,droid4", "ti,omap4430", "ti,omap4"; }; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < + + /* Row 1 */ + MATRIX_KEY(0, 2, KEY_1) + MATRIX_KEY(0, 6, KEY_2) + MATRIX_KEY(2, 3, KEY_3) + MATRIX_KEY(0, 7, KEY_4) + MATRIX_KEY(0, 4, KEY_5) + MATRIX_KEY(5, 5, KEY_6) + MATRIX_KEY(0, 1, KEY_7) + MATRIX_KEY(0, 5, KEY_8) + MATRIX_KEY(0, 0, KEY_9) + MATRIX_KEY(1, 6, KEY_0) + + /* Row 2 */ + MATRIX_KEY(3, 4, KEY_APOSTROPHE) + MATRIX_KEY(7, 6, KEY_Q) + MATRIX_KEY(7, 7, KEY_W) + MATRIX_KEY(7, 2, KEY_E) + MATRIX_KEY(1, 0, KEY_R) + MATRIX_KEY(4, 4, KEY_T) + MATRIX_KEY(1, 2, KEY_Y) + MATRIX_KEY(6, 7, KEY_U) + MATRIX_KEY(2, 2, KEY_I) + MATRIX_KEY(5, 6, KEY_O) + MATRIX_KEY(3, 7, KEY_P) + MATRIX_KEY(6, 5, KEY_BACKSPACE) + + /* Row 3 */ + MATRIX_KEY(5, 4, KEY_TAB) + MATRIX_KEY(5, 7, KEY_A) + MATRIX_KEY(2, 7, KEY_S) + MATRIX_KEY(7, 0, KEY_D) + MATRIX_KEY(2, 6, KEY_F) + MATRIX_KEY(6, 2, KEY_G) + MATRIX_KEY(6, 6, KEY_H) + MATRIX_KEY(1, 4, KEY_J) + MATRIX_KEY(3, 1, KEY_K) + MATRIX_KEY(2, 1, KEY_L) + MATRIX_KEY(4, 6, KEY_ENTER) + + /* Row 4 */ + MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */ + MATRIX_KEY(6, 1, KEY_Z) + MATRIX_KEY(7, 4, KEY_X) + MATRIX_KEY(5, 1, KEY_C) + MATRIX_KEY(1, 7, KEY_V) + MATRIX_KEY(2, 4, KEY_B) + MATRIX_KEY(4, 1, KEY_N) + MATRIX_KEY(1, 1, KEY_M) + MATRIX_KEY(3, 5, KEY_COMMA) + MATRIX_KEY(5, 2, KEY_DOT) + MATRIX_KEY(6, 3, KEY_UP) + MATRIX_KEY(7, 3, KEY_OK) + + /* Row 5 */ + MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */ + MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */ + MATRIX_KEY(6, 0, KEY_MINUS) + MATRIX_KEY(4, 7, KEY_EQUAL) + MATRIX_KEY(1, 5, KEY_SPACE) + MATRIX_KEY(3, 2, KEY_SLASH) + MATRIX_KEY(4, 3, KEY_LEFT) + MATRIX_KEY(5, 3, KEY_DOWN) + MATRIX_KEY(3, 3, KEY_RIGHT) + + /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */ + MATRIX_KEY(5, 0, KEY_VOLUMEUP) + >; +}; + +&i2c1 { + led-controller@38 { + compatible = "ti,lm3532"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x38>; + + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + + ramp-up-us = <1024>; + ramp-down-us = <8193>; + + backlight_led: led@0 { + reg = <0>; + led-sources = <2>; + ti,led-mode = <0>; + label = ":backlight"; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + ti,led-mode = <0>; + label = ":kbd_backlight"; + }; + }; +}; + +&i2c4 { + lis3dh: accelerometer@18 { + compatible = "st,lis3dh-accel"; + reg = <0x18>; + + vdd-supply = <&vhvio>; + + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */ + + rotation-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "1"; + }; +}; diff --git a/arch/arm/boot/dts/omap4-kc1.dts b/arch/arm/boot/dts/omap4-kc1.dts index 31d856b58f8a..e59d17b25a1d 100644 --- a/arch/arm/boot/dts/omap4-kc1.dts +++ b/arch/arm/boot/dts/omap4-kc1.dts @@ -15,16 +15,16 @@ reg = <0x80000000 0x20000000>; /* 512 MB */ }; - pwmleds { + led-controller { compatible = "pwm-leds"; - green { + led-1 { label = "green"; pwms = <&twl_pwm 0 7812500>; max-brightness = <127>; }; - orange { + led-2 { label = "orange"; pwms = <&twl_pwm 1 7812500>; max-brightness = <127>; diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index de742bf84efb..e0bb60a30779 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -330,6 +330,7 @@ /* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */ clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>; clock-names = "fck"; + power-domains = <&prm_tesla>; resets = <&prm_tesla 1>; reset-names = "rstctrl"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index cfa85aa3da08..7c6886cd738f 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -46,7 +46,23 @@ button_pins: pinmux_button_pins { pinctrl-single,pins = < - OMAP4_IOPAD(0x11b, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */ + OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */ + >; + }; + + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 - BTEN */ + OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 - BTWAKEUP */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts - HCI */ + OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ + OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ >; }; }; @@ -80,3 +96,19 @@ &gpio1_target { ti,no-reset-on-init; }; + +&wl12xx_gpio { + pinctrl-single,pins = < + OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ + OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */ + >; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins &bt_pins>; + bluetooth: tiwi { + compatible = "ti,wl1271-st"; + enable-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; /* GPIO_46 */ + }; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index afb49a2d6963..9e976140f34a 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -45,58 +45,60 @@ regulator-boot-on; }; - leds { + led-controller-1 { compatible = "gpio-leds"; - debug0 { + + led-1 { label = "omap4:green:debug0"; gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */ }; - debug1 { + led-2 { label = "omap4:green:debug1"; gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */ }; - debug2 { + led-3 { label = "omap4:green:debug2"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */ }; - debug3 { + led-4 { label = "omap4:green:debug3"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */ }; - debug4 { + led-5 { label = "omap4:green:debug4"; gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */ }; - user1 { + led-6 { label = "omap4:blue:user"; gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */ }; - user2 { + led-7 { label = "omap4:red:user"; gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */ }; - user3 { + led-8 { label = "omap4:green:user"; gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */ }; }; - pwmleds { + led-controller-2 { compatible = "pwm-leds"; - kpad { + + led-9 { label = "omap4::keypad"; pwms = <&twl_pwm 0 7812500>; max-brightness = <127>; }; - charging { + led-10 { label = "omap4:green:chrg"; pwms = <&twl_pwmled 0 7812500>; max-brightness = <255>; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index d6475cc6a91a..72e4f6481776 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -107,11 +107,6 @@ ti,hwmods = "mpu"; sram = <&ocmcram>; }; - - iva { - compatible = "ti,ivahd"; - ti,hwmods = "iva"; - }; }; /* @@ -150,24 +145,41 @@ reg = <0x40304000 0xa000>; /* 40k */ }; - gpmc: gpmc@50000000 { - compatible = "ti,omap4430-gpmc"; - reg = <0x50000000 0x1000>; - #address-cells = <2>; - #size-cells = <1>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&sdma 4>; - dma-names = "rxtx"; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <4>; - ti,hwmods = "gpmc"; + target-module@50000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x50000000 4>, + <0x50000010 4>, + <0x50000014 4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; ti,no-idle-on-init; - clocks = <&l3_div_ck>; + clocks = <&l3_2_clkctrl OMAP4_GPMC_CLKCTRL 0>; clock-names = "fck"; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x50000000 0x50000000 0x00001000>, /* regs */ + <0x00000000 0x00000000 0x40000000>; /* data */ + + gpmc: gpmc@50000000 { + compatible = "ti,omap4430-gpmc"; + reg = <0x50000000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 4>; + dma-names = "rxtx"; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + clocks = <&l3_div_ck>; + clock-names = "fck"; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; }; target-module@52000000 { @@ -445,6 +457,7 @@ <0x58000014 4>; reg-names = "rev", "syss"; ti,syss-mask = <1>; + power-domains = <&prm_dss>; clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 0>, <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>, <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>, @@ -650,6 +663,32 @@ }; }; }; + + iva_hd_target: target-module@5a000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5a05a400 0x4>, + <0x5a05a410 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + power-domains = <&prm_ivahd>; + resets = <&prm_ivahd 2>; + reset-names = "rstctrl"; + clocks = <&ivahd_clkctrl OMAP4_IVA_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5a000000 0x5a000000 0x1000000>, + <0x5b000000 0x5b000000 0x1000000>; + + iva { + compatible = "ti,ivahd"; + }; + }; }; }; @@ -658,10 +697,17 @@ #include "omap44xx-clocks.dtsi" &prm { + prm_mpu: prm@300 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x300 0x100>; + #power-domain-cells = <0>; + }; + prm_tesla: prm@400 { compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; reg = <0x400 0x100>; #reset-cells = <1>; + #power-domain-cells = <0>; }; prm_abe: prm@500 { @@ -670,16 +716,78 @@ #power-domain-cells = <0>; }; + prm_always_on_core: prm@600 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x600 0x100>; + #power-domain-cells = <0>; + }; + prm_core: prm@700 { compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; reg = <0x700 0x100>; #reset-cells = <1>; + #power-domain-cells = <0>; }; prm_ivahd: prm@f00 { compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; reg = <0xf00 0x100>; #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + prm_cam: prm@1000 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x1000 0x100>; + #power-domain-cells = <0>; + }; + + prm_dss: prm@1100 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x1100 0x100>; + #power-domain-cells = <0>; + }; + + prm_gfx: prm@1200 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x1200 0x100>; + #power-domain-cells = <0>; + }; + + prm_l3init: prm@1300 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x1300 0x100>; + #power-domain-cells = <0>; + }; + + prm_l4per: prm@1400 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x1400 0x100>; + #power-domain-cells = <0>; + }; + + prm_cefuse: prm@1600 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x1600 0x100>; + #power-domain-cells = <0>; + }; + + prm_wkup: prm@1700 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x1700 0x100>; + #power-domain-cells = <0>; + }; + + prm_emu: prm@1900 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x1900 0x100>; + #power-domain-cells = <0>; + }; + + prm_dss: prm@1100 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x1100 0x40>; + #power-domain-cells = <0>; }; prm_device: prm@1b00 { diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index f3d3a16b7c64..887b3359dd5a 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -194,7 +194,7 @@ #size-cells = <1>; utmi-mode = <2>; ranges = <0 0 0x20000>; - dwc3: dwc3@10000 { + dwc3: usb@10000 { compatible = "snps,dwc3"; reg = <0x10000 0x10000>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 2bf2e5839a7f..5f1a8bd13880 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -410,6 +410,7 @@ <0x58000014 4>; reg-names = "rev", "syss"; ti,syss-mask = <1>; + power-domains = <&prm_dss>; clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 0>, <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>, @@ -670,10 +671,17 @@ #include "omap54xx-clocks.dtsi" &prm { + prm_mpu: prm@300 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x300 0x100>; + #power-domain-cells = <0>; + }; + prm_dsp: prm@400 { compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; reg = <0x400 0x100>; #reset-cells = <1>; + #power-domain-cells = <0>; }; prm_abe: prm@500 { @@ -682,16 +690,66 @@ #power-domain-cells = <0>; }; + prm_coreaon: prm@600 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x600 0x100>; + #power-domain-cells = <0>; + }; + prm_core: prm@700 { compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; reg = <0x700 0x100>; #reset-cells = <1>; + #power-domain-cells = <0>; }; prm_iva: prm@1200 { compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; reg = <0x1200 0x100>; #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + prm_cam: prm@1300 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x1300 0x100>; + #power-domain-cells = <0>; + }; + + prm_dss: prm@1400 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x1400 0x100>; + #power-domain-cells = <0>; + }; + + prm_gpu: prm@1500 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x1500 0x100>; + #power-domain-cells = <0>; + }; + + prm_l3init: prm@1600 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x1600 0x100>; + #power-domain-cells = <0>; + }; + + prm_custefuse: prm@1700 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x1700 0x100>; + #power-domain-cells = <0>; + }; + + prm_wkupaon: prm@1800 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x1800 0x100>; + #power-domain-cells = <0>; + }; + + prm_emu: prm@1a00 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x1a00 0x100>; + #power-domain-cells = <0>; }; prm_device: prm@1c00 { diff --git a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi new file mode 100644 index 000000000000..91163867be34 --- /dev/null +++ b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Bytedance. + */ + +partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + u-boot@0 { + reg = <0x0 0x60000>; // 384KB + label = "u-boot"; + }; + + u-boot-env@60000 { + reg = <0x60000 0x20000>; // 128KB + label = "u-boot-env"; + }; + + kernel@80000 { + reg = <0x80000 0x500000>; // 5MB + label = "kernel"; + }; + + rofs@580000 { + reg = <0x580000 0x2a80000>; // 42.5MB + label = "rofs"; + }; + + rwfs@3000000 { + reg = <0x3000000 0x1000000>; // 16MB + label = "rwfs"; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 32b474bfeec3..e769f638f205 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -566,6 +566,22 @@ usb_otg_vbus: usb-otg-vbus { }; }; + + fuelgauge: max17048@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x4d>; + + interrupt-parent = <&msmgpio>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; + + maxim,alert-low-soc-level = <2>; + }; }; i2c@f9924000 { @@ -706,6 +722,15 @@ power-source = <PM8941_GPIO_S3>; }; + fuelgauge_pin: fuelgauge-int { + pins = "gpio9"; + function = "normal"; + + bias-disable; + input-enable; + power-source = <PM8941_GPIO_S3>; + }; + wlan_sleep_clk_pin: wl-sleep-clk { pins = "gpio16"; function = "func2"; diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index d4dc98214225..97352de91314 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -4,6 +4,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/leds/common.h> / { model = "Samsung Galaxy S5"; @@ -11,6 +12,8 @@ aliases { serial0 = &blsp1_uart1; + sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ + sdhc2 = &sdhc_2; /* SDC2 SD card slot */ }; chosen { @@ -145,7 +148,7 @@ }; pma8084_l19: l19 { - regulator-min-microvolt = <2900000>; + regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; @@ -160,6 +163,9 @@ pma8084_l21: l21 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; + + regulator-allow-set-load; + regulator-system-load = <200000>; }; pma8084_l22: l22 { @@ -203,6 +209,95 @@ }; }; + i2c-gpio-touchkey { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + sda-gpios = <&msmgpio 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_touchkey_pins>; + + touchkey@20 { + compatible = "cypress,tm2-touchkey"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_pin>; + + vcc-supply = <&max77826_ldo15>; + vdd-supply = <&pma8084_l19>; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + }; + }; + + i2c-gpio-led { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + scl-gpios = <&msmgpio 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&msmgpio 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_led_gpioex_pins>; + + i2c-gpio,delay-us = <2>; + + gpio_expander: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + + gpio-controller; + #gpio-cells = <2>; + + vcc-supply = <&pma8084_s4>; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioex_pin>; + + reset-gpios = <&msmgpio 145 GPIO_ACTIVE_LOW>; + }; + + led-controller@30 { + compatible = "panasonic,an30259a"; + reg = <0x30>; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + /delete-node/ vreg-boost; }; @@ -258,9 +353,109 @@ bias-pull-up; }; }; + + sdhc2_pin_a: sdhc2-pin-active { + clk-cmd-data { + pins = "gpio35", "gpio36", "gpio37", "gpio38", + "gpio39", "gpio40"; + function = "sdc3"; + drive-strength = <8>; + bias-disable; + }; + }; + + sdhc2_cd_pin: sdhc2-cd { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdhc3_pin_a: sdhc3-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + i2c2_pins: i2c2 { + mux { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + + drive-strength = <2>; + bias-disable; + }; + }; + + i2c6_pins: i2c6 { + mux { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + + drive-strength = <2>; + bias-disable; + }; + }; + + i2c12_pins: i2c12 { + mux { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + + drive-strength = <2>; + bias-disable; + }; + }; + + i2c_touchkey_pins: i2c-touchkey { + mux { + pins = "gpio95", "gpio96"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; + + i2c_led_gpioex_pins: i2c-led-gpioex { + mux { + pins = "gpio120", "gpio121"; + function = "gpio"; + input-enable; + bias-pull-down; + }; + }; + + gpioex_pin: gpioex { + res { + pins = "gpio145"; + function = "gpio"; + + bias-pull-up; + drive-strength = <2>; + }; + }; + + wifi_pin: wifi { + int { + pins = "gpio92"; + function = "gpio"; + + input-enable; + bias-pull-down; + }; + }; }; - sdhci@f9824900 { + sdhc_1: sdhci@f9824900 { status = "ok"; vmmc-supply = <&pma8084_l20>; @@ -273,6 +468,55 @@ pinctrl-0 = <&sdhc1_pin_a>; }; + sdhc_2: sdhci@f9864900 { + status = "ok"; + + max-frequency = <100000000>; + + vmmc-supply = <&pma8084_l21>; + vqmmc-supply = <&pma8084_l13>; + + bus-width = <4>; + + /* cd-gpio is intentionally disabled. If enabled, an SD card + * present during boot is not initialized correctly. Without + * cd-gpios the driver resorts to polling, so hotplug works. + */ + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>; + // cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; + }; + + sdhci@f98a4900 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + max-frequency = <100000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc3_pin_a>; + + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pma8084_s4>; + + bus-width = <4>; + non-removable; + + wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + + interrupt-parent = <&msmgpio>; + interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>; + }; + }; + usb@f9a55000 { status = "ok"; @@ -298,14 +542,38 @@ }; }; - pinctrl@fd510000 { - i2c6_pins: i2c6 { - mux { - pins = "gpio29", "gpio30"; - function = "blsp_i2c6"; + i2c@f9924000 { + status = "okay"; - drive-strength = <2>; - bias-disable; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&max77826_ldo13>; + vio-supply = <&pma8084_lvs2>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; + + syna,startup-delay-ms = <100>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; }; }; }; @@ -408,6 +676,27 @@ }; }; }; + + i2c@f9968000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c12_pins>; + + fuelgauge@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x56>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; + }; + }; }; &spmi_bus { @@ -420,6 +709,39 @@ bias-pull-up; power-source = <PMA8084_GPIO_S4>; }; + + touchkey_pin: touchkey-int-pin { + pins = "gpio6"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; + + touch_pin: touchscreen-int-pin { + pins = "gpio8"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; + + wlan_sleep_clk_pin: wlan-sleep-clk-pin { + pins = "gpio16"; + function = "func2"; + + output-high; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + }; + + fuelgauge_pin: fuelgauge-int-pin { + pins = "gpio21"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; }; }; }; diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi index ea1ca166165c..e921c5e93a5d 100644 --- a/arch/arm/boot/dts/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -68,7 +68,6 @@ #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; - io-channel-ranges; die_temp { reg = <VADC_DIE_TEMP>; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts index 961c0f2eeefb..98c3fbd89fa6 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts @@ -20,6 +20,30 @@ serial5 = &hscif0; ethernet1 = ðer; }; + + mclk_cam1: mclk-cam1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + mclk_cam2: mclk-cam2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + mclk_cam3: mclk-cam3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + mclk_cam4: mclk-cam4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; }; &avb { @@ -47,6 +71,19 @@ }; }; +&gpio0 { + /* Disable hogging GP0_18 to output LOW */ + /delete-node/ qspi_en; + + /* Hog GP0_18 to output HIGH to enable VIN2 */ + vin2_en { + gpio-hog; + gpios = <18 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "VIN2_EN"; + }; +}; + &hscif0 { pinctrl-0 = <&hscif0_pins>; pinctrl-names = "default"; @@ -54,6 +91,94 @@ status = "okay"; }; +&i2c0 { + ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + clocks = <&mclk_cam1>; + clock-names = "xclk"; + + port { + ov5640_0: endpoint { + bus-width = <8>; + data-shift = <2>; + bus-type = <6>; + pclk-sample = <1>; + remote-endpoint = <&vin0ep>; + }; + }; + }; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + clocks = <&mclk_cam2>; + clock-names = "xclk"; + + port { + ov5640_1: endpoint { + bus-width = <8>; + data-shift = <2>; + bus-type = <6>; + pclk-sample = <1>; + remote-endpoint = <&vin1ep>; + }; + }; + }; +}; + +&i2c2 { + ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + clocks = <&mclk_cam3>; + clock-names = "xclk"; + + port { + ov5640_2: endpoint { + bus-width = <8>; + data-shift = <2>; + bus-type = <6>; + pclk-sample = <1>; + remote-endpoint = <&vin2ep>; + }; + }; + }; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + clocks = <&mclk_cam4>; + clock-names = "xclk"; + + port { + ov5640_3: endpoint { + bus-width = <8>; + data-shift = <2>; + bus-type = <6>; + pclk-sample = <1>; + remote-endpoint = <&vin3ep>; + }; + }; + }; +}; + &pfc { can0_pins: can0 { groups = "can0_data_d"; @@ -70,6 +195,16 @@ function = "hscif0"; }; + i2c1_pins: i2c1 { + groups = "i2c1_c"; + function = "i2c1"; + }; + + i2c3_pins: i2c3 { + groups = "i2c3"; + function = "i2c3"; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; @@ -84,6 +219,31 @@ groups = "scifb1_data"; function = "scifb1"; }; + + vin0_8bit_pins: vin0 { + groups = "vin0_data8", "vin0_clk", "vin0_sync"; + function = "vin0"; + }; + + vin1_8bit_pins: vin1 { + groups = "vin1_data8_b", "vin1_clk_b", "vin1_sync_b"; + function = "vin1"; + }; + + vin2_pins: vin2 { + groups = "vin2_g8", "vin2_clk"; + function = "vin2"; + }; + + vin3_pins: vin3 { + groups = "vin3_data8", "vin3_clk", "vin3_sync"; + function = "vin3"; + }; +}; + +&qspi { + /* Pins shared with VIN2, keep status disabled */ + status = "disabled"; }; &scif0 { @@ -106,3 +266,65 @@ rts-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; }; + +&vin0 { + /* + * Set SW2 switch on the SOM to 'ON' + * Set SW1 switch on camera board to 'OFF' as we are using 8bit mode + */ + status = "okay"; + pinctrl-0 = <&vin0_8bit_pins>; + pinctrl-names = "default"; + + port { + vin0ep: endpoint { + remote-endpoint = <&ov5640_0>; + bus-width = <8>; + bus-type = <6>; + }; + }; +}; + +&vin1 { + /* Set SW1 switch on the SOM to 'ON' */ + status = "okay"; + pinctrl-0 = <&vin1_8bit_pins>; + pinctrl-names = "default"; + + port { + vin1ep: endpoint { + remote-endpoint = <&ov5640_1>; + bus-width = <8>; + bus-type = <6>; + }; + }; +}; + +&vin2 { + status = "okay"; + pinctrl-0 = <&vin2_pins>; + pinctrl-names = "default"; + + port { + vin2ep: endpoint { + remote-endpoint = <&ov5640_2>; + bus-width = <8>; + data-shift = <8>; + bus-type = <6>; + }; + }; +}; + +&vin3 { + status = "okay"; + pinctrl-0 = <&vin3_pins>; + pinctrl-names = "default"; + + port { + vin3ep: endpoint { + remote-endpoint = <&ov5640_3>; + bus-width = <8>; + bus-type = <6>; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts index c2c05c9685d1..0063ef92f50e 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts @@ -30,6 +30,7 @@ /dts-v1/; #include "r8a7742-iwg21m.dtsi" +#include <dt-bindings/pwm/pwm.h> / { model = "iWave Systems RainboW-G21D-Qseven board based on RZ/G1H"; @@ -52,6 +53,16 @@ clock-frequency = <26000000>; }; + lcd_backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&tpu 2 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + pinctrl-0 = <&backlight_pins>; + pinctrl-names = "default"; + default-brightness-level = <7>; + enable-gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; + }; + leds { compatible = "gpio-leds"; @@ -62,6 +73,41 @@ }; }; + lvds-receiver { + compatible = "ti,ds90cf384a", "lvds-decoder"; + power-supply = <&vcc_3v3_tft1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds_receiver_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + port@1 { + reg = <1>; + lvds_receiver_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + + panel { + compatible = "edt,etm0700g0dh6"; + backlight = <&lcd_backlight>; + power-supply = <&vcc_3v3_tft1>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_receiver_out>; + }; + }; + }; + reg_1p5v: 1p5v { compatible = "regulator-fixed"; regulator-name = "1P5V"; @@ -85,6 +131,17 @@ }; }; + vcc_3v3_tft1: regulator-panel { + compatible = "regulator-fixed"; + + regulator-name = "vcc-3v3-tft1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + startup-delay-us = <500>; + gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>; + }; + vcc_sdhi2: regulator-vcc-sdhi2 { compatible = "regulator-fixed"; @@ -139,6 +196,16 @@ VDDIO-supply = <®_3p3v>; VDDD-supply = <®_1p5v>; }; + + touch: touchpanel@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&gpio0>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + /* GP1_29 is also shared with audio codec reset pin */ + reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + vcc-supply = <&vcc_3v3_tft1>; + }; }; &can1 { @@ -152,6 +219,18 @@ status = "okay"; }; +&du { + status = "okay"; +}; + +&gpio0 { + touch-interrupt { + gpio-hog; + gpios = <24 GPIO_ACTIVE_LOW>; + input; + }; +}; + &gpio1 { can-trx-en-gpio{ gpio-hog; @@ -167,6 +246,17 @@ status = "okay"; }; +&lvds0 { + status = "okay"; + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&lvds_receiver_in>; + }; + }; + }; +}; + &msiof0 { pinctrl-0 = <&msiof0_pins>; pinctrl-names = "default"; @@ -229,6 +319,11 @@ function = "avb"; }; + backlight_pins: backlight { + groups = "tpu0_to2"; + function = "tpu0"; + }; + can1_pins: can1 { groups = "can1_data_b"; function = "can1"; @@ -335,6 +430,10 @@ shared-pin; }; +&tpu { + status = "okay"; +}; + &usbphy { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index af77ab20586d..4a148cf1defc 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -20,7 +20,7 @@ &backlight { /* Jaq panel PWM must be >= 3%, so start non-zero brightness at 8 */ - brightness-levels = <0 8 255>; + brightness-levels = <8 255>; num-interpolated-steps = <247>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index f8b69e0a16a0..82fc6fba9999 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -39,7 +39,7 @@ &backlight { /* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */ - brightness-levels = <0 3 255>; + brightness-levels = <3 255>; num-interpolated-steps = <252>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rk3288-veyron-tiger.dts index 069f0c2c1fdf..52a84cbe7a90 100644 --- a/arch/arm/boot/dts/rk3288-veyron-tiger.dts +++ b/arch/arm/boot/dts/rk3288-veyron-tiger.dts @@ -23,7 +23,7 @@ &backlight { /* Tiger panel PWM must be >= 1%, so start non-zero brightness at 3 */ - brightness-levels = <0 3 255>; + brightness-levels = <3 255>; num-interpolated-steps = <252>; }; diff --git a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi index 4a373f5aa600..0ae2bd150e37 100644 --- a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi +++ b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi @@ -231,6 +231,23 @@ }; }; +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio5>; + interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + }; +}; + &i2c5 { status = "okay"; }; @@ -241,10 +258,17 @@ gpio1830-supply = <&vcc_18>; gpio30-supply = <&vcc_io>; sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc_wl>; status = "okay"; }; &pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { drive-strength = <8>; }; @@ -260,6 +284,12 @@ }; }; + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + sdmmc { sdmmc_bus4: sdmmc-bus4 { rockchip,pins = @@ -291,6 +321,16 @@ }; }; +&sdio_pwrseq { + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; /* WIFI_REG_ON */ +}; + &usbphy { status = "okay"; }; diff --git a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi index 26b53eac4706..da1d548b7330 100644 --- a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi +++ b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi @@ -15,6 +15,14 @@ #clock-cells = <0>; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + }; + vcc12v_dcin: vcc12v-dcin-regulator { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -78,6 +86,19 @@ status = "okay"; }; +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index a1a08cb9364e..e491964b1c3d 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -299,7 +299,7 @@ clock-names = "timer", "pclk"; }; - watchdog: wdt@10360000 { + watchdog: watchdog@10360000 { compatible = "snps,dw-wdt"; reg = <0x10360000 0x100>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index 47626ede6fdd..e7c379a9842e 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -10,7 +10,7 @@ / { model = "SMDK2416"; - compatible = "samsung,s3c2416"; + compatible = "samsung,smdk2416", "samsung,s3c2416"; memory@30000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts index 69c9ec4cf381..581309e7f15e 100644 --- a/arch/arm/boot/dts/s3c6410-smdk6410.dts +++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts @@ -17,7 +17,7 @@ / { model = "Samsung SMDK6410 board based on S3C6410"; - compatible = "samsung,mini6410", "samsung,s3c6410"; + compatible = "samsung,smdk6410", "samsung,s3c6410"; memory@50000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts index 8e57e5a1f0c5..6423348034b6 100644 --- a/arch/arm/boot/dts/s5pv210-aquila.dts +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -277,37 +277,37 @@ <&keypad_col0>, <&keypad_col1>, <&keypad_col2>; status = "okay"; - key_1 { + key-1 { keypad,row = <0>; keypad,column = <1>; linux,code = <KEY_CONNECT>; }; - key_2 { + key-2 { keypad,row = <0>; keypad,column = <2>; linux,code = <KEY_BACK>; }; - key_3 { + key-3 { keypad,row = <1>; keypad,column = <1>; linux,code = <KEY_CAMERA_FOCUS>; }; - key_4 { + key-4 { keypad,row = <1>; keypad,column = <2>; linux,code = <KEY_VOLUMEUP>; }; - key_5 { + key-5 { keypad,row = <2>; keypad,column = <1>; linux,code = <KEY_CAMERA>; }; - key_6 { + key-6 { keypad,row = <2>; keypad,column = <2>; linux,code = <KEY_VOLUMEDOWN>; diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index bd4450dbdcb6..160f8cd9a68d 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -54,7 +54,7 @@ clock-frequency = <32768>; }; - bt_codec: bt_sco { + bt_codec: bt-sco { compatible = "linux,bt-sco"; #sound-dai-cells = <0>; }; @@ -113,7 +113,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sound_i2c_pins>; - wm8994: wm8994@1a { + wm8994: audio-codec@1a { compatible = "wlf,wm8994"; reg = <0x1a>; @@ -589,7 +589,6 @@ io-channels = <&adc 9>; shunt-resistor-micro-ohms = <47000000>; /* 47 ohms */ #io-channel-cells = <0>; - io-channel-ranges; }; }; @@ -632,7 +631,7 @@ interrupts = <5 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&ts_irq>; - reset-gpios = <&gpj1 3 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpj1 3 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index ad8d5d2fa32d..5c1e12d39747 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -259,37 +259,37 @@ <&keypad_col0>, <&keypad_col1>, <&keypad_col2>; status = "okay"; - key_1 { + key-1 { keypad,row = <0>; keypad,column = <1>; linux,code = <KEY_CONNECT>; }; - key_2 { + key-2 { keypad,row = <0>; keypad,column = <2>; linux,code = <KEY_BACK>; }; - key_3 { + key-3 { keypad,row = <1>; keypad,column = <1>; linux,code = <KEY_CAMERA_FOCUS>; }; - key_4 { + key-4 { keypad,row = <1>; keypad,column = <2>; linux,code = <KEY_VOLUMEUP>; }; - key_5 { + key-5 { keypad,row = <2>; keypad,column = <1>; linux,code = <KEY_CAMERA>; }; - key_6 { + key-6 { keypad,row = <2>; keypad,column = <2>; linux,code = <KEY_VOLUMEDOWN>; @@ -353,7 +353,7 @@ samsung,i2c-slave-addr = <0x10>; status = "okay"; - tsp@4a { + touchscreen@4a { compatible = "atmel,maxtouch"; reg = <0x4a>; interrupt-parent = <&gpj0>; diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts index 7459e41e8ef1..fbae768d65e2 100644 --- a/arch/arm/boot/dts/s5pv210-smdkv210.dts +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -76,61 +76,61 @@ <&keypad_col6>, <&keypad_col7>; status = "okay"; - key_1 { + key-1 { keypad,row = <0>; keypad,column = <3>; linux,code = <KEY_1>; }; - key_2 { + key-2 { keypad,row = <0>; keypad,column = <4>; linux,code = <KEY_2>; }; - key_3 { + key-3 { keypad,row = <0>; keypad,column = <5>; linux,code = <KEY_3>; }; - key_4 { + key-4 { keypad,row = <0>; keypad,column = <6>; linux,code = <KEY_4>; }; - key_5 { + key-5 { keypad,row = <0 >; keypad,column = <7>; linux,code = <KEY_5>; }; - key_6 { + key-6 { keypad,row = <1>; keypad,column = <3>; linux,code = <KEY_A>; }; - key_7 { + key-7 { keypad,row = <1>; keypad,column = <4>; linux,code = <KEY_B>; }; - key_8 { + key-8 { keypad,row = <1>; keypad,column = <5>; linux,code = <KEY_C>; }; - key_9 { + key-9 { keypad,row = <1>; keypad,column = <6>; linux,code = <KEY_D>; }; - key_10 { + key-10 { keypad,row = <1>; keypad,column = <7>; linux,code = <KEY_E>; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 2871351ab907..353ba7b09a0c 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -149,7 +149,6 @@ clocks = <&clocks CLK_TSADC>; clock-names = "adc"; #io-channel-cells = <1>; - io-channel-ranges; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 2ddc85dff8ce..2c4952427296 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -656,6 +656,7 @@ clocks = <&pmc PMC_TYPE_PERIPHERAL 51>; #address-cells = <1>; #size-cells = <1>; + no-memory-wc; ranges = <0 0xf8044000 0x1420>; }; @@ -724,7 +725,7 @@ can0: can@f8054000 { compatible = "bosch,m_can"; - reg = <0xf8054000 0x4000>, <0x210000 0x4000>; + reg = <0xf8054000 0x4000>, <0x210000 0x1c00>; reg-names = "m_can", "message_ram"; interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>, <64 IRQ_TYPE_LEVEL_HIGH 7>; @@ -1130,7 +1131,7 @@ can1: can@fc050000 { compatible = "bosch,m_can"; - reg = <0xfc050000 0x4000>, <0x210000 0x4000>; + reg = <0xfc050000 0x4000>, <0x210000 0x3800>; reg-names = "m_can", "message_ram"; interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>, <65 IRQ_TYPE_LEVEL_HIGH 7>; @@ -1140,7 +1141,7 @@ assigned-clocks = <&pmc PMC_TYPE_GCK 57>; assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; assigned-clock-rates = <40000000>; - bosch,mram-cfg = <0x1100 0 0 64 0 0 32 32>; + bosch,mram-cfg = <0x1c00 0 0 64 0 0 32 32>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 86137f8d2b45..7c979652f330 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -305,9 +305,7 @@ }; adc0: adc@f8018000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "atmel,at91sam9x5-adc"; + compatible = "atmel,sama5d3-adc"; reg = <0xf8018000 0x100>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; @@ -333,30 +331,8 @@ atmel,adc-startup-time = <40>; atmel,adc-use-external-triggers; atmel,adc-vref = <3000>; - atmel,adc-res = <10 12>; atmel,adc-sample-hold-time = <11>; - atmel,adc-res-names = "lowres", "highres"; status = "disabled"; - - trigger0 { - trigger-name = "external-rising"; - trigger-value = <0x1>; - trigger-external; - }; - trigger1 { - trigger-name = "external-falling"; - trigger-value = <0x2>; - trigger-external; - }; - trigger2 { - trigger-name = "external-any"; - trigger-value = <0x3>; - trigger-external; - }; - trigger3 { - trigger-name = "continuous"; - trigger-value = <0x6>; - }; }; i2c2: i2c@f801c000 { diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 04f24cf752d3..05c55875835d 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -661,31 +661,9 @@ atmel,adc-startup-time = <40>; atmel,adc-use-external-triggers; atmel,adc-vref = <3000>; - atmel,adc-res = <8 10>; atmel,adc-sample-hold-time = <11>; - atmel,adc-res-names = "lowres", "highres"; atmel,adc-ts-pressure-threshold = <10000>; status = "disabled"; - - trigger0 { - trigger-name = "external-rising"; - trigger-value = <0x1>; - trigger-external; - }; - trigger1 { - trigger-name = "external-falling"; - trigger-value = <0x2>; - trigger-external; - }; - trigger2 { - trigger-name = "external-any"; - trigger-value = <0x3>; - trigger-external; - }; - trigger3 { - trigger-name = "continuous"; - trigger-value = <0x6>; - }; }; aes@fc044000 { diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi index aab5719cc1a9..4c16736ea789 100644 --- a/arch/arm/boot/dts/ste-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-ab8500.dtsi @@ -326,13 +326,13 @@ mcde@a0350000 { vana-supply = <&ab8500_ldo_ana_reg>; - dsi-controller@a0351000 { + dsi@a0351000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi-controller@a0352000 { + dsi@a0352000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi-controller@a0353000 { + dsi@a0353000 { vana-supply = <&ab8500_ldo_ana_reg>; }; }; diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi index 67bc69e67b33..c72aa250bf6f 100644 --- a/arch/arm/boot/dts/ste-ab8505.dtsi +++ b/arch/arm/boot/dts/ste-ab8505.dtsi @@ -261,13 +261,13 @@ mcde@a0350000 { vana-supply = <&ab8500_ldo_ana_reg>; - dsi-controller@a0351000 { + dsi@a0351000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi-controller@a0352000 { + dsi@a0352000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi-controller@a0353000 { + dsi@a0353000 { vana-supply = <&ab8500_ldo_ana_reg>; }; }; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 05fd544b06c1..404b9c4a5fee 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -1097,7 +1097,7 @@ ranges; status = "disabled"; - dsi0: dsi-controller@a0351000 { + dsi0: dsi@a0351000 { compatible = "ste,mcde-dsi"; reg = <0xa0351000 0x1000>; clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>; @@ -1105,7 +1105,7 @@ #address-cells = <1>; #size-cells = <0>; }; - dsi1: dsi-controller@a0352000 { + dsi1: dsi@a0352000 { compatible = "ste,mcde-dsi"; reg = <0xa0352000 0x1000>; clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>; @@ -1113,7 +1113,7 @@ #address-cells = <1>; #size-cells = <0>; }; - dsi2: dsi-controller@a0353000 { + dsi2: dsi@a0353000 { compatible = "ste,mcde-dsi"; reg = <0xa0353000 0x1000>; /* This DSI port only has the Low Power / Energy Save clock */ diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index b8fd8f18ba16..e32d0c36feb8 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -199,7 +199,7 @@ mcde@a0350000 { status = "okay"; - dsi-controller@a0351000 { + dsi@a0351000 { panel { compatible = "samsung,s6d16d0"; reg = <0>; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi index de82b9db956f..e024520f4d47 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi @@ -66,7 +66,7 @@ mcde@a0350000 { status = "okay"; - dsi-controller@a0351000 { + dsi@a0351000 { panel { compatible = "samsung,s6d16d0"; reg = <0>; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi index 9f285c7cf914..cb3677f0a1cb 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi @@ -45,7 +45,7 @@ mcde@a0350000 { status = "okay"; - dsi-controller@a0351000 { + dsi@a0351000 { panel { compatible = "sony,acx424akp"; reg = <0>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index a1093cb37dc7..496f9d3ba7b7 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -260,6 +260,11 @@ interrupt-parent = <&gpio6>; interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + /* VDDA is "analog supply", 2.57-3.47 V */ + vdda-supply = <&ab8500_ldo_aux2_reg>; + /* VDD is "digital supply" 1.71-3.47V */ + vdd-supply = <&ab8500_ldo_aux5_reg>; + pinctrl-names = "default"; pinctrl-0 = <&tsp_default>; }; @@ -284,7 +289,6 @@ regulator-name = "vreg_tsp_a3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-always-on; /* FIXME */ }; ab8500_ldo_aux3 { @@ -301,7 +305,6 @@ regulator-name = "vreg_tsp_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; /* FIXME */ }; ab8500_ldo_aux6 { @@ -322,7 +325,7 @@ pinctrl-names = "default"; pinctrl-0 = <&dsi_default_mode>; - dsi-controller@a0351000 { + dsi@a0351000 { panel@0 { compatible = "samsung,s6e63m0"; reg = <0>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index 27722c42b61c..b50634c81b44 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -393,7 +393,7 @@ pinctrl-names = "default"; pinctrl-0 = <&dsi_default_mode>; - dsi-controller@a0351000 { + dsi@a0351000 { panel { /* NT35510-based Hydis HVA40WV1 */ compatible = "hydis,hva40wv1", "novatek,nt35510"; @@ -433,6 +433,16 @@ }; }; + /* The unused FBCLK needs to be pulled down on this machine */ + sdi2 { + mc2_a_1_default { + default_cfg2 { + pins = "GPIO130_C8"; /* FBCLK */ + ste,config = <&in_pd>; + }; + }; + }; + mcde { dsi_default_mode: dsi_default { default_mux1 { diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 67e7648de41e..7e10ae744c9d 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -188,6 +188,7 @@ port { dcmi_0: endpoint { remote-endpoint = <&ov2640_0>; + bus-type = <5>; bus-width = <8>; hsync-active = <0>; vsync-active = <0>; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 7febe19e780d..b083afd0ebd6 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -274,7 +274,7 @@ dmamux1: dma-router@40020800 { compatible = "st,stm32h7-dmamux"; - reg = <0x40020800 0x1c>; + reg = <0x40020800 0x40>; #dma-cells = <3>; dma-channels = <16>; dma-requests = <128>; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index d84686e00370..20a59e8f7a33 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -349,6 +349,61 @@ }; }; + fmc_pins_b: fmc-1 { + pins { + pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */ + <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */ + <STM32_PINMUX('B', 7, AF12)>, /* FMC_NL */ + <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */ + <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */ + <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */ + <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */ + <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */ + <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */ + <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */ + <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */ + <STM32_PINMUX('E', 11, AF12)>, /* FMC_D8 */ + <STM32_PINMUX('E', 12, AF12)>, /* FMC_D9 */ + <STM32_PINMUX('E', 13, AF12)>, /* FMC_D10 */ + <STM32_PINMUX('E', 14, AF12)>, /* FMC_D11 */ + <STM32_PINMUX('E', 15, AF12)>, /* FMC_D12 */ + <STM32_PINMUX('D', 8, AF12)>, /* FMC_D13 */ + <STM32_PINMUX('D', 9, AF12)>, /* FMC_D14 */ + <STM32_PINMUX('D', 10, AF12)>, /* FMC_D15 */ + <STM32_PINMUX('G', 9, AF12)>, /* FMC_NE2_FMC_NCE */ + <STM32_PINMUX('G', 12, AF12)>; /* FMC_NE4 */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + + fmc_sleep_pins_b: fmc-sleep-1 { + pins { + pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */ + <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */ + <STM32_PINMUX('B', 7, ANALOG)>, /* FMC_NL */ + <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */ + <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */ + <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */ + <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */ + <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */ + <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */ + <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */ + <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */ + <STM32_PINMUX('E', 11, ANALOG)>, /* FMC_D8 */ + <STM32_PINMUX('E', 12, ANALOG)>, /* FMC_D9 */ + <STM32_PINMUX('E', 13, ANALOG)>, /* FMC_D10 */ + <STM32_PINMUX('E', 14, ANALOG)>, /* FMC_D11 */ + <STM32_PINMUX('E', 15, ANALOG)>, /* FMC_D12 */ + <STM32_PINMUX('D', 8, ANALOG)>, /* FMC_D13 */ + <STM32_PINMUX('D', 9, ANALOG)>, /* FMC_D14 */ + <STM32_PINMUX('D', 10, ANALOG)>, /* FMC_D15 */ + <STM32_PINMUX('G', 9, ANALOG)>, /* FMC_NE2_FMC_NCE */ + <STM32_PINMUX('G', 12, ANALOG)>; /* FMC_NE4 */ + }; + }; + i2c1_pins_a: i2c1-0 { pins { pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ @@ -1591,6 +1646,27 @@ }; }; + spi4_pins_a: spi4-0 { + pins { + pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */ + <STM32_PINMUX('E', 6, AF5)>; /* SPI4_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */ + bias-disable; + }; + }; + + stusb1600_pins_a: stusb1600-0 { + pins { + pinmux = <STM32_PINMUX('I', 11, ANALOG)>; + bias-pull-up; + }; + }; + uart4_pins_a: uart4-0 { pins1 { pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ @@ -1726,20 +1802,6 @@ }; }; - spi4_pins_a: spi4-0 { - pins { - pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */ - <STM32_PINMUX('E', 6, AF5)>; /* SPI4_MOSI */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - pins2 { - pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */ - bias-disable; - }; - }; - usart2_pins_a: usart2-0 { pins1 { pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */ diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 84757901cd8d..3c75abacb374 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -362,8 +362,10 @@ #size-cells = <0>; compatible = "st,stm32-lptimer"; reg = <0x40009000 0x400>; + interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc LPTIM1_K>; clock-names = "mux"; + wakeup-source; status = "disabled"; pwm { @@ -999,7 +1001,7 @@ dmamux1: dma-router@48002000 { compatible = "st,stm32h7-dmamux"; - reg = <0x48002000 0x1c>; + reg = <0x48002000 0x40>; #dma-cells = <3>; dma-requests = <128>; dma-masters = <&dma1 &dma2>; @@ -1047,7 +1049,7 @@ sdmmc3: sdmmc@48004000 { compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x10153180>; + arm,primecell-periphid = <0x00253180>; reg = <0x48004000 0x400>; interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "cmd_irq"; @@ -1068,9 +1070,9 @@ resets = <&rcc USBO_R>; reset-names = "dwc2"; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - g-rx-fifo-size = <256>; + g-rx-fifo-size = <512>; g-np-tx-fifo-size = <32>; - g-tx-fifo-size = <128 128 64 64 64 64 32 32>; + g-tx-fifo-size = <256 16 16 16 16 16 16 16>; dr_mode = "otg"; usb33d-supply = <&usb33>; status = "disabled"; @@ -1098,7 +1100,7 @@ resets = <&rcc CAMITF_R>; clocks = <&rcc DCMI>; clock-names = "mclk"; - dmas = <&dmamux1 75 0x400 0x0d>; + dmas = <&dmamux1 75 0x400 0x01>; dma-names = "tx"; status = "disabled"; }; @@ -1156,8 +1158,10 @@ #size-cells = <0>; compatible = "st,stm32-lptimer"; reg = <0x50021000 0x400>; + interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc LPTIM2_K>; clock-names = "mux"; + wakeup-source; status = "disabled"; pwm { @@ -1183,8 +1187,10 @@ #size-cells = <0>; compatible = "st,stm32-lptimer"; reg = <0x50022000 0x400>; + interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc LPTIM3_K>; clock-names = "mux"; + wakeup-source; status = "disabled"; pwm { @@ -1203,8 +1209,10 @@ lptimer4: timer@50023000 { compatible = "st,stm32-lptimer"; reg = <0x50023000 0x400>; + interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc LPTIM4_K>; clock-names = "mux"; + wakeup-source; status = "disabled"; pwm { @@ -1217,8 +1225,10 @@ lptimer5: timer@50024000 { compatible = "st,stm32-lptimer"; reg = <0x50024000 0x400>; + interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc LPTIM5_K>; clock-names = "mux"; + wakeup-source; status = "disabled"; pwm { @@ -1284,7 +1294,7 @@ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc HASH1>; resets = <&rcc HASH1_R>; - dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0>; + dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>; dma-names = "in"; dma-maxburst = <2>; status = "disabled"; @@ -1348,8 +1358,8 @@ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; reg-names = "qspi", "qspi_mm"; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>, - <&mdma1 22 0x10 0x100008 0x0 0x0>; + dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>, + <&mdma1 22 0x2 0x100008 0x0 0x0>; dma-names = "tx", "rx"; clocks = <&rcc QSPI_K>; resets = <&rcc QSPI_R>; @@ -1360,7 +1370,7 @@ sdmmc1: sdmmc@58005000 { compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x10153180>; + arm,primecell-periphid = <0x00253180>; reg = <0x58005000 0x1000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "cmd_irq"; @@ -1375,7 +1385,7 @@ sdmmc2: sdmmc@58007000 { compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x10153180>; + arm,primecell-periphid = <0x00253180>; reg = <0x58007000 0x1000>; interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "cmd_irq"; @@ -1426,7 +1436,7 @@ status = "disabled"; }; - usbh_ohci: usbh-ohci@5800c000 { + usbh_ohci: usb@5800c000 { compatible = "generic-ohci"; reg = <0x5800c000 0x1000>; clocks = <&rcc USBH>; @@ -1435,7 +1445,7 @@ status = "disabled"; }; - usbh_ehci: usbh-ehci@5800d000 { + usbh_ehci: usb@5800d000 { compatible = "generic-ehci"; reg = <0x5800d000 0x1000>; clocks = <&rcc USBH>; @@ -1563,6 +1573,11 @@ status = "disabled"; }; + tamp: tamp@5c00a000 { + compatible = "st,stm32-tamp", "syscon", "simple-mfd"; + reg = <0x5c00a000 0x400>; + }; + /* * Break node order to solve dependency probe issue between * pinctrl and exti. @@ -1739,6 +1754,8 @@ st,syscfg-holdboot = <&rcc 0x10C 0x1>; st,syscfg-tz = <&rcc 0x000 0x1>; st,syscfg-pdds = <&pwr_mcu 0x0 0x1>; + st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>; + st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts new file mode 100644 index 000000000000..cfb8f8a0c82d --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020 Marek Vasut <marex@denx.de> + * + * DHCOM STM32MP1 variant: + * DHCM-STM32MP157C-C065-R102-F0819-SPI-E-CAN2-SD-RTC-T-DSI-I-01D2 + * DHCOM PCB number: 587-200 or newer + * PicoITX PCB number: 487-600 or newer + */ +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15xx-dhcom-som.dtsi" +#include "stm32mp15xx-dhcom-picoitx.dtsi" + +/ { + model = "DH electronics STM32MP157C DHCOM PicoITX"; + compatible = "dh,stm32mp157c-dhcom-picoitx", "dh,stm32mp157c-dhcom-som", + "st,stm32mp157"; +}; + +&m_can1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_a>; + pinctrl-1 = <&m_can1_sleep_pins_a>; + status = "okay"; +}; + +&m_can2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can2_pins_a>; + pinctrl-1 = <&m_can2_sleep_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index 045636555ddd..2bc92ef3aeb9 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -29,6 +29,10 @@ }; }; +&cryp1 { + status = "okay"; +}; + &dsi { status = "okay"; phy-dsi-supply = <®18>; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index ca109dc18238..81a7d5849db4 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -89,6 +89,14 @@ states = <1800000 0x1>, <2900000 0x0>; }; + + vin: vin { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -107,6 +115,14 @@ }; }; +&crc1 { + status = "okay"; +}; + +&cryp1 { + status = "okay"; +}; + &dac { pinctrl-names = "default"; pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; @@ -128,6 +144,10 @@ contiguous-area = <&gpu_reserved>; }; +&hash1 { + status = "okay"; +}; + &i2c4 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_pins_a>; @@ -150,11 +170,18 @@ regulators { compatible = "st,stpmic1-regulators"; + buck1-supply = <&vin>; + buck2-supply = <&vin>; + buck3-supply = <&vin>; + buck4-supply = <&vin>; ldo1-supply = <&v3v3>; ldo2-supply = <&v3v3>; ldo3-supply = <&vdd_ddr>; + ldo4-supply = <&vin>; ldo5-supply = <&v3v3>; ldo6-supply = <&v3v3>; + vref_ddr-supply = <&vin>; + boost-supply = <&vin>; pwr_sw1-supply = <&bst_out>; pwr_sw2-supply = <&bst_out>; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index a55e80ce2602..5c5b1ddf7bfd 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -90,6 +90,7 @@ port { dcmi_0: endpoint { remote-endpoint = <&ov5640_0>; + bus-type = <5>; bus-width = <8>; hsync-active = <0>; vsync-active = <0>; diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts index 1e5333fd437f..cda8e871f999 100644 --- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts @@ -15,7 +15,7 @@ / { model = "Linux Automation MC-1 board"; - compatible = "lxa,stm32mp157c-mc1", "st,stm32mp157"; + compatible = "lxa,stm32mp157c-mc1", "oct,stm32mp15xx-osd32", "st,stm32mp157"; aliases { ethernet0 = ðernet0; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi index 5dff24e39af8..8456f172d4b1 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi @@ -46,6 +46,16 @@ linux,code = <KEY_A>; gpios = <&gpiof 3 GPIO_ACTIVE_LOW>; }; + + /* + * The EXTi IRQ line 0 is shared with PMIC, + * so mark this as polled GPIO key. + */ + button-2 { + label = "TA3-GPIO-C"; + linux,code = <KEY_C>; + gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; + }; }; gpio-keys { @@ -59,13 +69,6 @@ wakeup-source; }; - button-2 { - label = "TA3-GPIO-C"; - linux,code = <KEY_C>; - gpios = <&gpioi 11 GPIO_ACTIVE_LOW>; - wakeup-source; - }; - button-3 { label = "TA4-GPIO-D"; linux,code = <KEY_D>; @@ -79,7 +82,7 @@ led-0 { label = "green:led5"; - gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>; + gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>; default-state = "off"; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi new file mode 100644 index 000000000000..356150d28c42 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi @@ -0,0 +1,143 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020 Marek Vasut <marex@denx.de> + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases { + serial0 = &uart4; + serial1 = &usart3; + serial2 = &uart8; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + led { + compatible = "gpio-leds"; + + led-0 { + label = "yellow:led"; + gpios = <&gpioi 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +&adc { + status = "disabled"; +}; + +&dac { + status = "disabled"; +}; + +&gpioa { + /* + * NOTE: The USB Port on the PicoITX needs a PWR_EN signal to enable + * port power. This signal should be handled by USB power sequencing + * in order to turn on port power when USB bus is powered up, but so + * far there is no such functionality. + */ + usb-port-power { + gpio-hog; + gpios = <13 GPIO_ACTIVE_LOW>; + output-low; + line-name = "usb-port-power"; + }; +}; + +&gpioc { + gpio-line-names = "", "", "", "", + "", "", "In1", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiod { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "Out1", + "Out2", "", "", ""; +}; + +&gpiog { + gpio-line-names = "In2", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&i2c2 { /* On board-to-board connector (optional) */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c5 { /* On board-to-board connector */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; +}; + +&usart3 { + pinctrl-names = "default"; + pinctrl-0 = <&usart3_pins_a>; + status = "okay"; +}; + +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbh_ohci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "otg"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phy-names = "usb2-phy"; + phys = <&usbphyc_port1 0>; + vbus-supply = <&vbus_otg>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index b4b52cf634af..ac46ab363e1b 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -11,6 +11,7 @@ / { aliases { ethernet0 = ðernet0; + ethernet1 = &ksz8851; }; memory@c0000000 { @@ -68,6 +69,7 @@ gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; regulator-always-on; regulator-boot-on; + vin-supply = <&vdd>; }; }; @@ -126,10 +128,46 @@ phy0: ethernet-phy@1 { reg = <1>; + interrupt-parent = <&gpioi>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; }; }; }; +&fmc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&fmc_pins_b>; + pinctrl-1 = <&fmc_sleep_pins_b>; + status = "okay"; + + ksz8851: ks8851mll@1,0 { + compatible = "micrel,ks8851-mll"; + reg = <1 0x0 0x2>, <1 0x2 0x20000>; + interrupt-parent = <&gpioc>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + bank-width = <2>; + + /* Timing values are in nS */ + st,fmc2-ebi-cs-mux-enable; + st,fmc2-ebi-cs-transaction-type = <4>; + st,fmc2-ebi-cs-buswidth = <16>; + st,fmc2-ebi-cs-address-setup-ns = <5>; + st,fmc2-ebi-cs-address-hold-ns = <5>; + st,fmc2-ebi-cs-bus-turnaround-ns = <5>; + st,fmc2-ebi-cs-data-setup-ns = <45>; + st,fmc2-ebi-cs-data-hold-ns = <1>; + st,fmc2-ebi-cs-write-address-setup-ns = <5>; + st,fmc2-ebi-cs-write-address-hold-ns = <5>; + st,fmc2-ebi-cs-write-bus-turnaround-ns = <5>; + st,fmc2-ebi-cs-write-data-setup-ns = <45>; + st,fmc2-ebi-cs-write-data-hold-ns = <1>; + }; +}; + +&gpioc { + status = "okay"; +}; + &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins_a>; @@ -202,6 +240,7 @@ vdda: ldo1 { regulator-name = "vdda"; + regulator-always-on; regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; interrupts = <IT_CURLIM_LDO1 0>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi index 04fbb324a541..803eb8bc9c85 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi @@ -21,6 +21,10 @@ }; }; +&dts { + status = "okay"; +}; + &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index a5307745719a..89c0e1ddc387 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -80,6 +80,14 @@ dais = <&sai2a_port &sai2b_port &i2s2_port>; status = "okay"; }; + + vin: vin { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -116,6 +124,10 @@ status = "okay"; }; +&crc1 { + status = "okay"; +}; + &dts { status = "okay"; }; @@ -143,6 +155,10 @@ contiguous-area = <&gpu_reserved>; }; +&hash1 { + status = "okay"; +}; + &i2c1 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c1_pins_a>; @@ -230,6 +246,30 @@ /delete-property/dmas; /delete-property/dma-names; + stusb1600@28 { + compatible = "st,stusb1600"; + reg = <0x28>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioi>; + pinctrl-names = "default"; + pinctrl-0 = <&stusb1600_pins_a>; + status = "okay"; + vdd-supply = <&vin>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + typec-power-opmode = "default"; + + port { + con_usbotg_hs_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; + }; + }; + }; + pmic: stpmic@33 { compatible = "st,stpmic1"; reg = <0x33>; @@ -240,9 +280,18 @@ regulators { compatible = "st,stpmic1-regulators"; + buck1-supply = <&vin>; + buck2-supply = <&vin>; + buck3-supply = <&vin>; + buck4-supply = <&vin>; ldo1-supply = <&v3v3>; + ldo2-supply = <&vin>; ldo3-supply = <&vdd_ddr>; + ldo4-supply = <&vin>; + ldo5-supply = <&vin>; ldo6-supply = <&v3v3>; + vref_ddr-supply = <&vin>; + boost-supply = <&vin>; pwr_sw1-supply = <&bst_out>; pwr_sw2-supply = <&bst_out>; @@ -631,6 +680,12 @@ phy-names = "usb2-phy"; usb-role-switch; status = "okay"; + + port { + usbotg_hs_ep: endpoint { + remote-endpoint = <&con_usbotg_hs_ep>; + }; + }; }; &usbphyc { diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 0f95a6ef8543..1c5a666c54b5 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -143,7 +143,7 @@ trips { cpu_alert0: cpu-alert0 { /* milliCelsius */ - temperature = <850000>; + temperature = <85000>; hysteresis = <2000>; type = "passive"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 049e6ab3cf56..73de34ae37fd 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -154,7 +154,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index 32d5d45a35c0..8945dbb114a2 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -130,7 +130,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_gmac_3v3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index bb3987e101c2..0b3d9ae75650 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -132,7 +132,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_gmac_3v3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 8c8dee6ea461..9109ca0919ad 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -151,7 +151,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index fce2f7fcd084..bf38c66c1815 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -1,5 +1,5 @@ /* - * Copyright 2015 Adam Sampson <ats@offog.org> + * Copyright 2015-2020 Adam Sampson <ats@offog.org> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -115,7 +115,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 9d34eabba121..431f70234d36 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -131,7 +131,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_sw>; phy-handle = <&rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; allwinner,rx-delay-ps = <700>; allwinner,tx-delay-ps = <700>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index d9be511f054f..d8326a5c681d 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -183,7 +183,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_dldo4>; phy-handle = <&rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index 4c6704e4c57e..e76d56a3df9c 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -136,6 +136,70 @@ }; +&pio { + gpio-line-names = + /* PA */ + "CON2-P13", "CON2-P11", "CON2-P22", "CON2-P15", + "CON3-P03", "CON3-P02", "CON2-P07", "CON2-P29", + "CON2-P31", "CON2-P33", "CON2-P35", "CON2-P05", + "CON2-P03", "CON2-P08", "CON2-P10", "CON2-P16", + "CON2-P12", "CON2-P37", "CON2-P28", "CON2-P27", + "CON2-P40", "CON2-P38", "", "", + "", "", "", "", "", "", "", "", + + /* PB */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + + /* PC */ + "CON2-P19", "CON2-P21", "CON2-P23", "CON2-P24", + "CON2-P18", "", "", "CON2-P26", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + + /* PD */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "CSI-PWR-EN", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + + /* PE */ + "CN3-P17", "CN3-P13", "CN3-P09", "CN3-P07", + "CN3-P19", "CN3-P21", "CN3-P22", "CN3-P20", + "CN3-P18", "CN3-P16", "CN3-P14", "CN3-P12", + "CN3-P05", "CN3-P03", "CN3-P06", "CN3-P08", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + + /* PF */ + "SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3", + "SDC0-D2", "SDC0-DET", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + + /* PG */ + "WL-SDIO-CLK", "WL-SDIO-CMD", "WL-SDIO-D0", "WL-SDIO-D1", + "WL-SDIO-D2", "WL-SDIO-D3", "BT-UART-TX", "BT-UART-RX", + "BT-UART-RTS", "BT-UART-CTS", "WL-WAKE-AP", "BT-WAKE-AP", + "BT-RST-N", "AP-WAKE-BT", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&r_pio { + gpio-line-names = + /* PL */ + "", "CPUX-SET", "CON2-P32", "POWER-KEY", "CON2-P36", + "VCC-IO-EN", "USB0-ID", "WL-PWR-EN", + "PWR-STB", "PWR-DRAM", "PWR-LED", "IR-RX", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + &usb_otg { dr_mode = "otg"; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts new file mode 100644 index 000000000000..204a39f93f4e --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com> + * Copyright (C) 2020 Jayantajit Gogoi <jayanta.gogoi525@gmail.com> + * Copyright (C) 2020 Yu-Tung Chang <mtwget@gmail.com> +*/ + +#include "sun8i-h3-nanopi.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + model = "FriendlyARM NanoPi R1"; + compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3"; + + aliases { + serial1 = &uart1; + ethernet0 = &emac; + ethernet1 = &wifi; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ + }; + + reg_vdd_cpux: gpio-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + gpios-states = <0x1>; + states = <1100000 0x0 + 1300000 0x1>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; + }; + + leds { + led-2 { + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + }; + + led-3 { + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; /* PA9 */ + }; + }; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + wifi: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +®_usb0_vbus { + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ + shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + }; +}; + +&usb_otg { + status = "okay"; + dr_mode = "otg"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts index 71fb73208939..babf4cf1b2f6 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts @@ -53,11 +53,6 @@ }; }; -&emac { - /* LEDs changed to active high on the plus */ - /delete-property/ allwinner,leds-active-low; -}; - &mmc1 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts index 6dbf7b2e0c13..b6ca45d18e51 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts @@ -67,7 +67,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-zeropi.dts b/arch/arm/boot/dts/sun8i-h3-zeropi.dts new file mode 100644 index 000000000000..7d3e7323b661 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-zeropi.dts @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2020 Yu-Tung Chang <mtwget@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun8i-h3-nanopi.dtsi" + +/ { + model = "FriendlyARM ZeroPi"; + compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3"; + + aliases { + ethernet0 = &emac; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ + }; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii-id"; + + allwinner,leds-active-low; + status = "okay"; +}; + +&usb_otg { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index 2fc62ef0cb3e..a6a1087a0c9b 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -129,7 +129,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_dc1sw>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi b/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi new file mode 100644 index 000000000000..24d507cdbcf9 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io> + */ + +/dts-v1/; +#include "sun8i-v3.dtsi" +#include "sunxi-common-regulators.dtsi" + +/ { + model = "Elimo Impetus SoM"; + compatible = "elimo,impetus", "sochip,s3", "allwinner,sun8i-v3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&mmc0 { + broken-cd; + bus-width = <4>; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_pb_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts new file mode 100644 index 000000000000..039677c2cc65 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io> + */ + +/dts-v1/; +#include "sun8i-s3-elimo-impetus.dtsi" + +/ { + model = "Elimo Initium"; + compatible = "elimo,initium", "elimo,impetus", "sochip,s3", + "allwinner,sun8i-v3"; + + aliases { + serial1 = &uart1; + }; +}; + +&uart1 { + pinctrl-0 = <&uart1_pg_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/sun8i-s3-pinecube.dts index 9bab6b7f4014..4aa0ee897a0a 100644 --- a/arch/arm/boot/dts/sun8i-s3-pinecube.dts +++ b/arch/arm/boot/dts/sun8i-s3-pinecube.dts @@ -10,7 +10,7 @@ / { model = "PineCube IP Camera"; - compatible = "pine64,pinecube", "allwinner,sun8i-s3"; + compatible = "pine64,pinecube", "sochip,s3", "allwinner,sun8i-v3"; aliases { serial0 = &uart2; diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/sun8i-v3.dtsi index ca4672ed2e02..c279e13583ba 100644 --- a/arch/arm/boot/dts/sun8i-v3.dtsi +++ b/arch/arm/boot/dts/sun8i-v3.dtsi @@ -24,4 +24,9 @@ &pio { compatible = "allwinner,sun8i-v3-pinctrl"; + + uart1_pg_pins: uart1-pg-pins { + pins = "PG6", "PG7"; + function = "uart1"; + }; }; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 0c7341676921..f8f19d8fa795 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -348,6 +348,12 @@ }; /omit-if-no-ref/ + i2c1_pb_pins: i2c1-pb-pins { + pins = "PB8", "PB9"; + function = "i2c1"; + }; + + /omit-if-no-ref/ i2c1_pe_pins: i2c1-pe-pins { pins = "PE21", "PE22"; function = "i2c1"; @@ -539,7 +545,7 @@ gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts index 15c22b06fc4b..47954551f573 100644 --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts @@ -120,7 +120,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_dc1sw>; status = "okay"; }; @@ -198,16 +198,16 @@ }; ®_dc1sw { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-name = "vcc-gmac-phy"; }; ®_dcdc1 { regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; }; ®_dcdc2 { diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index d3b337b043a1..484b93df20cb 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -129,7 +129,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_cldo1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index bbc6335e5631..5c3580d712e4 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -124,7 +124,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_cldo1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi index 39263e74fbb5..8e5cb3b3fd68 100644 --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi @@ -126,7 +126,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 22d533d18992..9be13378d4df 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -662,6 +662,19 @@ status = "disabled"; }; + i2s2: i2s@1c22800 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-h3-i2s"; + reg = <0x01c22800 0x400>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>; + clock-names = "apb", "mod"; + dmas = <&dma 27>; + resets = <&ccu RST_BUS_I2S2>; + dma-names = "tx"; + status = "disabled"; + }; + codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-h3-codec"; diff --git a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi index 32401457ae71..a7ac805eeed5 100644 --- a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi @@ -1465,3 +1465,11 @@ }; }; }; + +&emc_icc_dvfs_opp_table { + /delete-node/ opp@1200000000,1100; +}; + +&emc_bw_dfs_opp_table { + /delete-node/ opp@1200000000; +}; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi index 861d3f22116b..df4e463afbd1 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi @@ -2420,3 +2420,11 @@ }; }; }; + +&emc_icc_dvfs_opp_table { + /delete-node/ opp@1200000000,1100; +}; + +&emc_bw_dfs_opp_table { + /delete-node/ opp@1200000000; +}; diff --git a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi index c91647d13a50..a0f56cc9da5c 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi @@ -6649,3 +6649,13 @@ }; }; }; + +&emc_icc_dvfs_opp_table { + /delete-node/ opp@924000000,1100; + /delete-node/ opp@1200000000,1100; +}; + +&emc_bw_dfs_opp_table { + /delete-node/ opp@924000000; + /delete-node/ opp@1200000000; +}; diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi index d2beea0bd15f..35c98734d35f 100644 --- a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi @@ -2048,3 +2048,13 @@ }; }; }; + +&emc_icc_dvfs_opp_table { + /delete-node/ opp@924000000,1100; + /delete-node/ opp@1200000000,1100; +}; + +&emc_bw_dfs_opp_table { + /delete-node/ opp@924000000; + /delete-node/ opp@1200000000; +}; diff --git a/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi new file mode 100644 index 000000000000..49d9420a3289 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi @@ -0,0 +1,419 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + emc_icc_dvfs_opp_table: emc-dvfs-opp-table { + compatible = "operating-points-v2"; + + opp@12750000,800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x0003>; + }; + + opp@12750000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x0008>; + }; + + opp@12750000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x0010>; + }; + + opp@12750000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x0004>; + }; + + opp@20400000,800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <20400000>; + opp-supported-hw = <0x0003>; + }; + + opp@20400000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <20400000>; + opp-supported-hw = <0x0008>; + }; + + opp@20400000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <20400000>; + opp-supported-hw = <0x0010>; + }; + + opp@20400000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <20400000>; + opp-supported-hw = <0x0004>; + }; + + opp@40800000,800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <40800000>; + opp-supported-hw = <0x0003>; + }; + + opp@40800000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <40800000>; + opp-supported-hw = <0x0008>; + }; + + opp@40800000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <40800000>; + opp-supported-hw = <0x0010>; + }; + + opp@40800000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <40800000>; + opp-supported-hw = <0x0004>; + }; + + opp@68000000,800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <68000000>; + opp-supported-hw = <0x0003>; + }; + + opp@68000000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <68000000>; + opp-supported-hw = <0x0008>; + }; + + opp@68000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <68000000>; + opp-supported-hw = <0x0010>; + }; + + opp@68000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <68000000>; + opp-supported-hw = <0x0004>; + }; + + opp@102000000,800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x0003>; + }; + + opp@102000000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x0008>; + }; + + opp@102000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x0010>; + }; + + opp@102000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x0004>; + }; + + opp@204000000,800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x0003>; + }; + + opp@204000000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x0008>; + }; + + opp@204000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x0010>; + }; + + opp@204000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x0004>; + }; + + opp@264000000,800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <264000000>; + opp-supported-hw = <0x0003>; + }; + + opp@264000000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <264000000>; + opp-supported-hw = <0x0008>; + }; + + opp@264000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <264000000>; + opp-supported-hw = <0x0010>; + }; + + opp@264000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <264000000>; + opp-supported-hw = <0x0004>; + }; + + opp@300000000,850 { + opp-microvolt = <850000 850000 1150000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0003>; + }; + + opp@300000000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0008>; + }; + + opp@300000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0010>; + }; + + opp@300000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0004>; + }; + + opp@348000000,850 { + opp-microvolt = <850000 850000 1150000>; + opp-hz = /bits/ 64 <348000000>; + opp-supported-hw = <0x0003>; + }; + + opp@348000000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <348000000>; + opp-supported-hw = <0x0008>; + }; + + opp@348000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <348000000>; + opp-supported-hw = <0x0010>; + }; + + opp@348000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <348000000>; + opp-supported-hw = <0x0004>; + }; + + opp@396000000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <396000000>; + opp-supported-hw = <0x0008>; + }; + + opp@396000000,1000 { + opp-microvolt = <1000000 1000000 1150000>; + opp-hz = /bits/ 64 <396000000>; + opp-supported-hw = <0x0003>; + }; + + opp@396000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <396000000>; + opp-supported-hw = <0x0010>; + }; + + opp@396000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <396000000>; + opp-supported-hw = <0x0004>; + }; + + opp@528000000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <528000000>; + opp-supported-hw = <0x0008>; + }; + + opp@528000000,1000 { + opp-microvolt = <1000000 1000000 1150000>; + opp-hz = /bits/ 64 <528000000>; + opp-supported-hw = <0x0003>; + }; + + opp@528000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <528000000>; + opp-supported-hw = <0x0010>; + }; + + opp@528000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <528000000>; + opp-supported-hw = <0x0004>; + }; + + opp@600000000,950 { + opp-microvolt = <950000 950000 1150000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x0008>; + }; + + opp@600000000,1000 { + opp-microvolt = <1000000 1000000 1150000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x0003>; + }; + + opp@600000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x0010>; + }; + + opp@600000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x0004>; + }; + + opp@792000000,1000 { + opp-microvolt = <1000000 1000000 1150000>; + opp-hz = /bits/ 64 <792000000>; + opp-supported-hw = <0x000B>; + }; + + opp@792000000,1050 { + opp-microvolt = <1050000 1050000 1150000>; + opp-hz = /bits/ 64 <792000000>; + opp-supported-hw = <0x0010>; + }; + + opp@792000000,1110 { + opp-microvolt = <1110000 1110000 1150000>; + opp-hz = /bits/ 64 <792000000>; + opp-supported-hw = <0x0004>; + }; + + opp@924000000,1100 { + opp-microvolt = <1100000 1100000 1150000>; + opp-hz = /bits/ 64 <924000000>; + opp-supported-hw = <0x0013>; + }; + + opp@1200000000,1100 { + opp-microvolt = <1100000 1100000 1150000>; + opp-hz = /bits/ 64 <1200000000>; + opp-supported-hw = <0x0003>; + }; + }; + + emc_bw_dfs_opp_table: emc-bandwidth-opp-table { + compatible = "operating-points-v2"; + + opp@12750000 { + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <204000>; + }; + + opp@20400000 { + opp-hz = /bits/ 64 <20400000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <326400>; + }; + + opp@40800000 { + opp-hz = /bits/ 64 <40800000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <652800>; + }; + + opp@68000000 { + opp-hz = /bits/ 64 <68000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <1088000>; + }; + + opp@102000000 { + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <1632000>; + }; + + opp@204000000 { + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <3264000>; + }; + + opp@264000000 { + opp-hz = /bits/ 64 <264000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <4224000>; + }; + + opp@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <4800000>; + }; + + opp@348000000 { + opp-hz = /bits/ 64 <348000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <5568000>; + }; + + opp@396000000 { + opp-hz = /bits/ 64 <396000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <6336000>; + }; + + opp@528000000 { + opp-hz = /bits/ 64 <528000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <8448000>; + }; + + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <9600000>; + }; + + opp@792000000 { + opp-hz = /bits/ 64 <792000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <12672000>; + }; + + opp@924000000 { + opp-hz = /bits/ 64 <924000000>; + opp-supported-hw = <0x0013>; + opp-peak-kBps = <14784000>; + }; + + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-supported-hw = <0x0003>; + opp-peak-kBps = <19200000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 64f488ba1e72..0b678afb2a5c 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -8,6 +8,8 @@ #include <dt-bindings/thermal/tegra124-soctherm.h> #include <dt-bindings/soc/tegra-pmc.h> +#include "tegra124-peripherals-opp.dtsi" + / { compatible = "nvidia,tegra124"; interrupt-parent = <&lic>; @@ -113,6 +115,19 @@ iommus = <&mc TEGRA_SWGROUP_DC>; nvidia,head = <0>; + + interconnects = <&mc TEGRA124_MC_DISPLAY0A &emc>, + <&mc TEGRA124_MC_DISPLAY0B &emc>, + <&mc TEGRA124_MC_DISPLAY0C &emc>, + <&mc TEGRA124_MC_DISPLAYHC &emc>, + <&mc TEGRA124_MC_DISPLAYD &emc>, + <&mc TEGRA124_MC_DISPLAYT &emc>; + interconnect-names = "wina", + "winb", + "winc", + "cursor", + "wind", + "wint"; }; dc@54240000 { @@ -127,6 +142,15 @@ iommus = <&mc TEGRA_SWGROUP_DCB>; nvidia,head = <1>; + + interconnects = <&mc TEGRA124_MC_DISPLAY0AB &emc>, + <&mc TEGRA124_MC_DISPLAY0BB &emc>, + <&mc TEGRA124_MC_DISPLAY0CB &emc>, + <&mc TEGRA124_MC_DISPLAYHCB &emc>; + interconnect-names = "wina", + "winb", + "winc", + "cursor"; }; hdmi: hdmi@54280000 { @@ -268,6 +292,9 @@ clock-names = "actmon", "emc"; resets = <&tegra_car 119>; reset-names = "actmon"; + operating-points-v2 = <&emc_bw_dfs_opp_table>; + interconnects = <&mc TEGRA124_MC_MPCORER &emc>; + interconnect-names = "cpu-read"; }; gpio: gpio@6000d000 { @@ -628,6 +655,7 @@ #iommu-cells = <1>; #reset-cells = <1>; + #interconnect-cells = <1>; }; emc: external-memory-controller@7001b000 { @@ -637,6 +665,9 @@ clock-names = "emc"; nvidia,memory-controller = <&mc>; + operating-points-v2 = <&emc_icc_dvfs_opp_table>; + + #interconnect-cells = <0>; }; sata@70020000 { @@ -650,9 +681,9 @@ <&tegra_car TEGRA124_CLK_PLL_E>; clock-names = "sata", "sata-oob", "cml1", "pll_e"; resets = <&tegra_car 124>, - <&tegra_car 123>, - <&tegra_car 129>; - reset-names = "sata", "sata-oob", "sata-cold"; + <&tegra_car 129>, + <&tegra_car 123>; + reset-names = "sata", "sata-cold", "sata-oob"; status = "disabled"; }; @@ -898,9 +929,11 @@ reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */ <0x0 0x60006000 0x0 0x400>; /* CAR reg_base */ reg-names = "soctherm-reg", "car-reg"; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "thermal", "edp"; clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, - <&tegra_car TEGRA124_CLK_SOC_THERM>; + <&tegra_car TEGRA124_CLK_SOC_THERM>; clock-names = "tsensor", "soctherm"; resets = <&tegra_car 78>; reset-names = "soctherm"; @@ -910,6 +943,7 @@ throttle_heavy: heavy { nvidia,priority = <100>; nvidia,cpu-throt-percent = <85>; + nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>; #cooling-cells = <2>; }; @@ -1247,6 +1281,11 @@ hysteresis = <0>; type = "critical"; }; + mem-throttle-trip { + temperature = <99000>; + hysteresis = <1000>; + type = "hot"; + }; }; cooling-maps { @@ -1298,6 +1337,11 @@ hysteresis = <0>; type = "critical"; }; + pllx-throttle-trip { + temperature = <99000>; + hysteresis = <1000>; + type = "hot"; + }; }; cooling-maps { diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts index a0b829738e8f..d3b99535d755 100644 --- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts @@ -446,7 +446,7 @@ interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>; avdd-supply = <&vdd_3v3_sys>; vdd-supply = <&vdd_3v3_sys>; @@ -512,6 +512,16 @@ reg = <1>; #address-cells = <1>; #size-cells = <0>; + + embedded-controller@58 { + compatible = "acer,a500-iconia-ec", "ene,kb930"; + reg = <0x58>; + + system-power-controller; + + monitored-battery = <&bat1010>; + power-supplies = <&mains>; + }; }; }; @@ -794,6 +804,13 @@ default-brightness-level = <20>; }; + bat1010: battery-2s1p { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3260000>; + energy-full-design-microwatt-hours = <24000000>; + operating-range-celsius = <0 40>; + }; + /* PMIC has a built-in 32KHz oscillator which is used by PMC */ clk32k_in: clock@0 { compatible = "fixed-clock"; @@ -907,6 +924,7 @@ compatible = "ti,sn75lvds83", "lvds-encoder"; powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>; + power-supply = <&vdd_3v3_sys>; ports { #address-cells = <1>; @@ -1020,14 +1038,14 @@ }; thermal-zones { - nct1008-local { + skin-thermal { polling-delay-passive = <1000>; /* milliseconds */ polling-delay = <0>; /* milliseconds */ thermal-sensors = <&nct1008 0>; }; - nct1008-remote { + cpu-thermal { polling-delay-passive = <1000>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ @@ -1450,3 +1468,8 @@ }; }; }; + +&emc_icc_dvfs_opp_table { + /delete-node/ opp@666000000; + /delete-node/ opp@760000000; +}; diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi index 6162d193e12c..585a5b441cf6 100644 --- a/arch/arm/boot/dts/tegra20-colibri.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri.dtsi @@ -742,6 +742,10 @@ }; }; +&emc_icc_dvfs_opp_table { + /delete-node/ opp@760000000; +}; + &gpio { lan-reset-n { gpio-hog; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index ada2bed8b1b5..7e49112cd9a1 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -662,3 +662,7 @@ }; }; }; + +&emc_icc_dvfs_opp_table { + /delete-node/ opp@760000000; +}; diff --git a/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi new file mode 100644 index 000000000000..b84afecea154 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + emc_icc_dvfs_opp_table: emc-dvfs-opp-table { + compatible = "operating-points-v2"; + + opp@36000000 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <36000000>; + opp-supported-hw = <0x000F>; + }; + + opp@47500000 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <47500000>; + opp-supported-hw = <0x000F>; + }; + + opp@50000000 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <50000000>; + opp-supported-hw = <0x000F>; + }; + + opp@54000000 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <54000000>; + opp-supported-hw = <0x000F>; + }; + + opp@57000000 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <57000000>; + opp-supported-hw = <0x000F>; + }; + + opp@100000000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <100000000>; + opp-supported-hw = <0x000F>; + }; + + opp@108000000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <108000000>; + opp-supported-hw = <0x000F>; + }; + + opp@126666000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <126666000>; + opp-supported-hw = <0x000F>; + }; + + opp@150000000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <150000000>; + opp-supported-hw = <0x000F>; + }; + + opp@190000000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <190000000>; + opp-supported-hw = <0x000F>; + }; + + opp@216000000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <216000000>; + opp-supported-hw = <0x000F>; + }; + + opp@300000000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x000F>; + }; + + opp@333000000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <333000000>; + opp-supported-hw = <0x000F>; + }; + + opp@380000000 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <380000000>; + opp-supported-hw = <0x000F>; + }; + + opp@600000000 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x000F>; + }; + + opp@666000000 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <666000000>; + opp-supported-hw = <0x000F>; + }; + + opp@760000000 { + opp-microvolt = <1300000 1300000 1300000>; + opp-hz = /bits/ 64 <760000000>; + opp-supported-hw = <0x000F>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index b158771ac0b7..055334ae3d28 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -3,6 +3,7 @@ #include <dt-bindings/input/input.h> #include "tegra20.dtsi" +#include "tegra20-cpu-opp.dtsi" / { model = "NVIDIA Tegra20 Ventana evaluation board"; @@ -592,6 +593,16 @@ #clock-cells = <0>; }; + cpus { + cpu0: cpu@0 { + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@1 { + operating-points-v2 = <&cpu0_opp_table>; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 72a4211a618f..6ce498178105 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -6,6 +6,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/soc/tegra-pmc.h> +#include "tegra20-peripherals-opp.dtsi" + / { compatible = "nvidia,tegra20"; interrupt-parent = <&lic>; @@ -111,6 +113,17 @@ nvidia,head = <0>; + interconnects = <&mc TEGRA20_MC_DISPLAY0A &emc>, + <&mc TEGRA20_MC_DISPLAY0B &emc>, + <&mc TEGRA20_MC_DISPLAY1B &emc>, + <&mc TEGRA20_MC_DISPLAY0C &emc>, + <&mc TEGRA20_MC_DISPLAYHC &emc>; + interconnect-names = "wina", + "winb", + "winb-vfilter", + "winc", + "cursor"; + rgb { status = "disabled"; }; @@ -128,6 +141,17 @@ nvidia,head = <1>; + interconnects = <&mc TEGRA20_MC_DISPLAY0AB &emc>, + <&mc TEGRA20_MC_DISPLAY0BB &emc>, + <&mc TEGRA20_MC_DISPLAY1BB &emc>, + <&mc TEGRA20_MC_DISPLAY0CB &emc>, + <&mc TEGRA20_MC_DISPLAYHCB &emc>; + interconnect-names = "wina", + "winb", + "winb-vfilter", + "winc", + "cursor"; + rgb { status = "disabled"; }; @@ -630,15 +654,20 @@ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; #reset-cells = <1>; #iommu-cells = <0>; + #interconnect-cells = <1>; }; - memory-controller@7000f400 { + emc: memory-controller@7000f400 { compatible = "nvidia,tegra20-emc"; - reg = <0x7000f400 0x200>; + reg = <0x7000f400 0x400>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA20_CLK_EMC>; #address-cells = <1>; #size-cells = <0>; + #interconnect-cells = <0>; + + operating-points-v2 = <&emc_icc_dvfs_opp_table>; + nvidia,memory-controller = <&mc>; }; fuse@7000f800 { diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi index 88ca03f57b3b..ac1c1a63eb0e 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi @@ -75,7 +75,7 @@ }; gpio@6000d000 { - init-mode { + init-mode-hog { gpio-hog; gpios = <TEGRA_GPIO(DD, 7) GPIO_ACTIVE_HIGH>, <TEGRA_GPIO(CC, 6) GPIO_ACTIVE_HIGH>, @@ -83,7 +83,7 @@ output-low; }; - init-low-power-mode { + init-low-power-mode-hog { gpio-hog; gpios = <TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>; input; @@ -1073,8 +1073,16 @@ }; display-panel { - compatible = "hydis,hv070wx2-1e0", "chunghwa,claa070wp03xg", - "panel-lvds"; + /* + * Nexus 7 supports two compatible panel models: + * + * 1. hydis,hv070wx2-1e0 + * 2. chunghwa,claa070wp03xg + * + * We want to use timing which is optimized for Nexus 7, + * hence we need to customize the timing. + */ + compatible = "panel-lvds"; power-supply = <&vdd_pnl>; backlight = <&backlight>; @@ -1145,6 +1153,7 @@ compatible = "ti,sn75lvds83", "lvds-encoder"; powerdown-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>; + power-supply = <&vdd_3v3_sys>; ports { #address-cells = <1>; @@ -1240,14 +1249,14 @@ }; thermal-zones { - nct72-local { + skin-thermal { polling-delay-passive = <1000>; /* milliseconds */ polling-delay = <0>; /* milliseconds */ thermal-sensors = <&nct72 0>; }; - nct72-remote { + cpu-thermal { polling-delay-passive = <1000>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ @@ -1255,9 +1264,9 @@ trips { trip0: cpu-alert0 { - /* start throttling at 50C */ - temperature = <50000>; - hysteresis = <3000>; + /* throttle at 57C until temperature drops to 56.8C */ + temperature = <57000>; + hysteresis = <200>; type = "passive"; }; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi index b25b3fa90ac6..17b6682ffce8 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi @@ -29,7 +29,7 @@ }; }; - cpu-pwr-req { + cpu-pwr-req-hog { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; input; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi index bc0f6f29b956..bcff0997ee51 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi @@ -1563,3 +1563,15 @@ }; }; }; + +&emc_icc_dvfs_opp_table { + /delete-node/ opp@750000000,1300; + /delete-node/ opp@800000000,1300; + /delete-node/ opp@900000000,1350; +}; + +&emc_bw_dfs_opp_table { + /delete-node/ opp@750000000; + /delete-node/ opp@800000000; + /delete-node/ opp@900000000; +}; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi index e3da89f1941a..a681ad51fddd 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi @@ -23,7 +23,7 @@ }; gpio@6000d000 { - init-mode-3g { + init-mode-3g-hog { gpio-hog; gpios = <TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>, <TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>, diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts new file mode 100644 index 000000000000..74da1360d297 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-ouya.dts @@ -0,0 +1,4519 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/thermal/thermal.h> + +#include "tegra30.dtsi" +#include "tegra30-cpu-opp.dtsi" +#include "tegra30-cpu-opp-microvolt.dtsi" + +/ { + model = "Ouya Game Console"; + compatible = "ouya,ouya", "nvidia,tegra30"; + + aliases { + mmc0 = &sdmmc4; /* eMMC */ + mmc1 = &sdmmc3; /* WiFi */ + rtc0 = &pmic; + rtc1 = "/rtc@7000e000"; + serial0 = &uartd; /* Debug Port */ + serial1 = &uartc; /* Bluetooth */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma@80000000 { + compatible = "shared-dma-pool"; + alloc-ranges = <0x80000000 0x30000000>; + size = <0x10000000>; /* 256MiB */ + linux,cma-default; + reusable; + }; + + ramoops@bfdf0000 { + compatible = "ramoops"; + reg = <0xbfdf0000 0x10000>; /* 64kB */ + console-size = <0x8000>; /* 32kB */ + record-size = <0x400>; /* 1kB */ + ecc-size = <16>; + }; + + trustzone@bfe00000 { + reg = <0xbfe00000 0x200000>; + no-map; + }; + }; + + host1x@50000000 { + hdmi@54280000 { + status = "okay"; + vdd-supply = <&vdd_vid_reg>; + pll-supply = <&ldo7_reg>; + hdmi-supply = <&sys_3v3_reg>; + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + }; + + gpio: gpio@6000d000 { + gpio-ranges = <&pinmux 0 0 248>; + #reset-cells = <1>; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + state_default: pinmux { + /* located at $state_default below */ + }; + }; + + uartc: serial@70006200 { + status = "okay"; + compatible = "nvidia,tegra30-hsuart"; + + nvidia,adjust-baud-rates = <0 9600 100>, + <9600 115200 200>, + <1000000 4000000 136>; + + /* Azurewave AW-NH660 BCM4330B1 */ + bluetooth { + compatible = "brcm,bcm4330-bt"; + + max-speed = <4000000>; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; + clock-names = "txco"; + + vbat-supply = <&sys_3v3_reg>; + vddio-supply = <&vdd_1v8>; + + shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>; + }; + }; + + uartd: serial@70006300 { + status = "okay"; + }; + + hdmi_ddc: i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + cpu_temp: nct1008@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + vcc-supply = <&sys_3v3_reg>; + #thermal-sensor-cells = <1>; +/* + * The interrupt is bugged, once triggered it never clears. + * interrupt-parent = <&gpio>; + * interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>; + */ + }; + + pmic: pmic@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + + ti,en-gpio-sleep = <0 1 1 1 1 1 0 0 1>; + ti,system-power-controller; + ti,sleep-keep-ck32k; + ti,sleep-enable; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&vdd_5v0_reg>; + vcc2-supply = <&vdd_5v0_reg>; + vcc3-supply = <&vdd_1v8>; + vcc4-supply = <&vdd_5v0_reg>; + vcc5-supply = <&vdd_5v0_reg>; + vcc6-supply = <&vdd2_reg>; + vcc7-supply = <&vdd_5v0_reg>; + vccio-supply = <&vdd_5v0_reg>; + + regulators { + vdd1_reg: vdd1 { + regulator-name = "vddio_ddr_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd2_reg: vdd2 { + regulator-name = "vdd_1v5_gen"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vdd_cpu: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1270000>; + regulator-coupled-with = <&vdd_core>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + regulator-always-on; + + nvidia,tegra-cpu-regulator; + }; + + vdd_1v8: vio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "vdd_pexa,vdd_pexb"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-name = "vdd_sata,avdd_plle"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + /* LDO3 is not connected to anything */ + + ldo4_reg: ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + regulator-name = "vddio_sdmmc,avdd_vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-name = "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo7_reg: ldo7 { + regulator-name = "vdd_pllm,x,u,a_p_c_s"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + + vdd_core: tps62361@60 { + compatible = "ti,tps62361"; + reg = <0x60>; + + regulator-name = "vdd_core"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-coupled-with = <&vdd_cpu>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + ti,enable-vout-discharge; + + nvidia,tegra-core-regulator; + }; + }; + + pmc@7000e400 { + status = "okay"; + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <200>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <458>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + mc_timings: memory-controller@7000f000 { + /* timings located at &mc_timings below */ + }; + + emc_timings: memory-controller@7000f400 { + /* timings located at &emc_timings below */ + }; + + hda@70030000 { + status = "okay"; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; + clock-names = "ext_clock"; + + reset-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <300>; + power-off-delay-us = <300>; + }; + + sdmmc3: mmc@78000400 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>; + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>; + assigned-clock-rates = <50000000>; + + max-frequency = <50000000>; + keep-power-in-suspend; + + bus-width = <4>; + non-removable; + + mmc-pwrseq = <&wifi_pwrseq>; + vmmc-supply = <&sdmmc_3v3_reg>; + vqmmc-supply = <&vdd_1v8>; + + /* Azurewave AW-NH660 BCM4330 */ + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; + }; + + sdmmc4: mmc@78000600 { + status = "okay"; + + keep-power-in-suspend; + bus-width = <8>; + non-removable; + vmmc-supply = <&sys_3v3_reg>; + vqmmc-supply = <&vdd_1v8>; + nvidia,default-tap = <0x0F>; + max-frequency = <25500000>; + }; + + usb@7d000000 { + compatible = "nvidia,tegra30-udc"; + status = "okay"; + }; + + usb-phy@7d000000 { + status = "okay"; + dr_mode = "peripheral"; + }; + + usb@7d004000 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + smsc@2 { /* SMSC 10/100T Ethernet Controller */ + compatible = "usb424,9e00"; + reg = <2>; + local-mac-address = [00 11 22 33 44 55]; + }; + }; + + usb-phy@7d004000 { + vbus-supply = <&vdd_smsc>; + status = "okay"; + }; + + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + vbus-supply = <&usb3_vbus_reg>; + status = "okay"; + }; + + /* PMIC has a built-in 32KHz oscillator which is used by PMC */ + clk32k_in: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic-oscillator"; + }; + + cpus { + cpu0: cpu@0 { + operating-points-v2 = <&cpu0_opp_table>; + cpu-supply = <&vdd_cpu>; + #cooling-cells = <2>; + }; + cpu@1 { + operating-points-v2 = <&cpu0_opp_table>; + cpu-supply = <&vdd_cpu>; + }; + + cpu@2 { + operating-points-v2 = <&cpu0_opp_table>; + cpu-supply = <&vdd_cpu>; + }; + + cpu@3 { + operating-points-v2 = <&cpu0_opp_table>; + cpu-supply = <&vdd_cpu>; + }; + }; + + firmware { + trusted-foundations { + compatible = "tlm,trusted-foundations"; + tlm,version-major = <0x0>; + tlm,version-minor = <0x0>; + }; + }; + + fan: gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio TEGRA_GPIO(J, 2) GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0 + 4500 1>; + #cooling-cells = <2>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay = <5000>; + polling-delay-passive = <5000>; + + thermal-sensors = <&cpu_temp 1>; + + trips { + cpu_alert0: cpu-alert0 { + temperature = <50000>; + hysteresis = <10000>; + type = "active"; + }; + cpu_alert1: cpu-alert1 { + temperature = <70000>; + hysteresis = <5000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + vdd_12v_in: vdd_12v_in { + compatible = "regulator-fixed"; + regulator-name = "vdd_12v_in"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + sdmmc_3v3_reg: sdmmc_3v3_reg { + compatible = "regulator-fixed"; + regulator-name = "sdmmc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + regulator-always-on; + gpio = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + vdd_fuse_3v3_reg: vdd_fuse_3v3_reg { + compatible = "regulator-fixed"; + regulator-name = "vdd_fuse_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + regulator-always-on; + }; + + vdd_vid_reg: vdd_vid_reg { + compatible = "regulator-fixed"; + regulator-name = "vddio_vid"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>; + vin-supply = <&vdd_5v0_reg>; + regulator-boot-on; + }; + + ddr_reg: ddr_reg { + compatible = "regulator-fixed"; + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + enable-active-high; + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; + regulator-boot-on; + vin-supply = <&vdd_12v_in>; + }; + + sys_3v3_reg: sys_3v3_reg { + compatible = "regulator-fixed"; + regulator-name = "sys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_12v_in>; + }; + + vdd_5v0_reg: vdd_5v0_reg { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_12v_in>; + }; + + vdd_smsc: vdd_smsc { + compatible = "regulator-fixed"; + regulator-name = "vdd_smsc"; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(DD, 5) GPIO_ACTIVE_HIGH>; + }; + + usb3_vbus_reg: usb3_vbus_reg { + compatible = "regulator-fixed"; + regulator-name = "usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>; + vin-supply = <&vdd_5v0_reg>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; + debounce-interval = <10>; + linux,code = <KEY_POWER>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + }; + + + leds { + compatible = "gpio-leds"; + + led-power { + label = "power-led"; + gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + retain-state-suspended; + }; + }; +}; +&mc_timings { + emc-timings-0 { + nvidia,ram-code = <0>; /* Samsung RAM */ + timing-25500000 { + clock-frequency = <25500000>; + nvidia,emem-configuration = < + 0x00030003 /* MC_EMEM_ARB_CFG */ + 0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000001 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x75830303 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-51000000 { + clock-frequency = <51000000>; + nvidia,emem-configuration = < + 0x00010003 /* MC_EMEM_ARB_CFG */ + 0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000001 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x74630303 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,emem-configuration = < + 0x00000003 /* MC_EMEM_ARB_CFG */ + 0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0503 /* MC_EMEM_ARB_DA_COVERS */ + 0x73c30504 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,emem-configuration = < + 0x00000006 /* MC_EMEM_ARB_CFG */ + 0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000004 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0505 /* MC_EMEM_ARB_DA_COVERS */ + 0x73840a06 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-400000000 { + clock-frequency = <400000000>; + nvidia,emem-configuration = < + 0x0000000c /* MC_EMEM_ARB_CFG */ + 0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000007 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000d0709 /* MC_EMEM_ARB_DA_COVERS */ + 0x7086120a /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-800000000 { + clock-frequency = <800000000>; + nvidia,emem-configuration = < + 0x00000018 /* MC_EMEM_ARB_CFG */ + 0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000013 /* MC_EMEM_ARB_TIMING_RC */ + 0x0000000c /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000f /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000008 /* MC_EMEM_ARB_TIMING_W2R */ + 0x08040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00160d13 /* MC_EMEM_ARB_DA_COVERS */ + 0x712c2414 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + }; + emc-timings-1 { + nvidia,ram-code = <1>; /* Hynix M RAM */ + timing-25500000 { + clock-frequency = <25500000>; + nvidia,emem-configuration = < + 0x00030003 /* MC_EMEM_ARB_CFG */ + 0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000001 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x75830303 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-51000000 { + clock-frequency = <51000000>; + nvidia,emem-configuration = < + 0x00010003 /* MC_EMEM_ARB_CFG */ + 0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000001 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x74630303 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,emem-configuration = < + 0x00000003 /* MC_EMEM_ARB_CFG */ + 0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0503 /* MC_EMEM_ARB_DA_COVERS */ + 0x73c30504 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,emem-configuration = < + 0x00000006 /* MC_EMEM_ARB_CFG */ + 0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000004 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0505 /* MC_EMEM_ARB_DA_COVERS */ + 0x73840a06 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-400000000 { + clock-frequency = <400000000>; + nvidia,emem-configuration = < + 0x0000000c /* MC_EMEM_ARB_CFG */ + 0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000007 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000d0709 /* MC_EMEM_ARB_DA_COVERS */ + 0x7086120a /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-800000000 { + clock-frequency = <800000000>; + nvidia,emem-configuration = < + 0x00000018 /* MC_EMEM_ARB_CFG */ + 0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000013 /* MC_EMEM_ARB_TIMING_RC */ + 0x0000000c /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000f /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000008 /* MC_EMEM_ARB_TIMING_W2R */ + 0x08040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00160d13 /* MC_EMEM_ARB_DA_COVERS */ + 0x712c2414 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + }; + emc-timings-2 { + nvidia,ram-code = <2>; /* Hynix A RAM */ + timing-25500000 { + clock-frequency = <25500000>; + nvidia,emem-configuration = < + 0x00030003 /* MC_EMEM_ARB_CFG */ + 0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000001 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x75e30303 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-51000000 { + clock-frequency = <51000000>; + nvidia,emem-configuration = < + 0x00010003 /* MC_EMEM_ARB_CFG */ + 0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000001 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x74e30303 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,emem-configuration = < + 0x00000003 /* MC_EMEM_ARB_CFG */ + 0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0503 /* MC_EMEM_ARB_DA_COVERS */ + 0x74430504 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,emem-configuration = < + 0x00000006 /* MC_EMEM_ARB_CFG */ + 0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000004 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0505 /* MC_EMEM_ARB_DA_COVERS */ + 0x74040a06 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-400000000 { + clock-frequency = <400000000>; + nvidia,emem-configuration = < + 0x0000000c /* MC_EMEM_ARB_CFG */ + 0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000007 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000d0709 /* MC_EMEM_ARB_DA_COVERS */ + 0x7086120a /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + timing-800000000 { + clock-frequency = <800000000>; + nvidia,emem-configuration = < + 0x00000018 /* MC_EMEM_ARB_CFG */ + 0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000013 /* MC_EMEM_ARB_TIMING_RC */ + 0x0000000c /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000f /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000008 /* MC_EMEM_ARB_TIMING_W2R */ + 0x08040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00160d13 /* MC_EMEM_ARB_DA_COVERS */ + 0x712c2414 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + }; +}; +&emc_timings { + emc-timings-0 { + nvidia,ram-code = <0>; /* Samsung RAM */ + timing-25500000 { + clock-frequency = <25500000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000001 /* EMC_RC */ + 0x00000006 /* EMC_RFC */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x000000c0 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000007 /* EMC_TXSR */ + 0x00000007 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000002 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x000000c7 /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000287 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-51000000 { + clock-frequency = <51000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000002 /* EMC_RC */ + 0x0000000d /* EMC_RFC */ + 0x00000001 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000181 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000000e /* EMC_TXSR */ + 0x0000000e /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000003 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000018e /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x8000040b /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000004 /* EMC_RC */ + 0x0000001a /* EMC_RFC */ + 0x00000003 /* EMC_RAS */ + 0x00000001 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000001 /* EMC_RD_RCD */ + 0x00000001 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000303 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000001c /* EMC_TXSR */ + 0x0000001c /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000031c /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000713 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000009 /* EMC_RC */ + 0x00000035 /* EMC_RFC */ + 0x00000007 /* EMC_RAS */ + 0x00000002 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000002 /* EMC_RD_RCD */ + 0x00000002 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000607 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000038 /* EMC_TXSR */ + 0x00000038 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000009 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000638 /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000006 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x004400a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00080000 /* EMC_DLL_XFORM_DQS0 */ + 0x00080000 /* EMC_DLL_XFORM_DQS1 */ + 0x00080000 /* EMC_DLL_XFORM_DQS2 */ + 0x00080000 /* EMC_DLL_XFORM_DQS3 */ + 0x00080000 /* EMC_DLL_XFORM_DQS4 */ + 0x00080000 /* EMC_DLL_XFORM_DQS5 */ + 0x00080000 /* EMC_DLL_XFORM_DQS6 */ + 0x00080000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-400000000 { + clock-frequency = <400000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-configuration = < + 0x00000012 /* EMC_RC */ + 0x00000066 /* EMC_RFC */ + 0x0000000c /* EMC_RAS */ + 0x00000004 /* EMC_RP */ + 0x00000003 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000a /* EMC_W2P */ + 0x00000004 /* EMC_RD_RCD */ + 0x00000004 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000004 /* EMC_WDV */ + 0x00000006 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000c /* EMC_RDV */ + 0x00000bf0 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000008 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000006c /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000010 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000c30 /* EMC_TREFBW */ + 0x00000000 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00007088 /* EMC_FBIO_CFG5 */ + 0x001d0084 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0003c000 /* EMC_DLL_XFORM_DQS0 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS1 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS2 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS3 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS4 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS5 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS6 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00048000 /* EMC_DLL_XFORM_DQ0 */ + 0x00048000 /* EMC_DLL_XFORM_DQ1 */ + 0x00048000 /* EMC_DLL_XFORM_DQ2 */ + 0x00048000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800013d /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f508 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x08000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0158000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff89 /* EMC_CFG_RSV */ + >; + }; + timing-800000000 { + clock-frequency = <800000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200018>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-configuration = < + 0x00000025 /* EMC_RC */ + 0x000000ce /* EMC_RFC */ + 0x0000001a /* EMC_RAS */ + 0x00000009 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000d /* EMC_W2R */ + 0x00000004 /* EMC_R2P */ + 0x00000013 /* EMC_W2P */ + 0x00000009 /* EMC_RD_RCD */ + 0x00000009 /* EMC_WR_RCD */ + 0x00000004 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000007 /* EMC_WDV */ + 0x0000000a /* EMC_QUSE */ + 0x00000009 /* EMC_QRST */ + 0x0000000b /* EMC_QSAFE */ + 0x00000011 /* EMC_RDV */ + 0x00001820 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000003 /* EMC_PDEX2WR */ + 0x00000012 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000f /* EMC_AR2PDEN */ + 0x00000018 /* EMC_RW2PDEN */ + 0x000000d8 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000020 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000007 /* EMC_TCLKSTABLE */ + 0x00000008 /* EMC_TCLKSTOP */ + 0x00001860 /* EMC_TREFBW */ + 0x0000000b /* EMC_QUSE_EXTRA */ + 0x00000006 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00005088 /* EMC_FBIO_CFG5 */ + 0xf0070191 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000800a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQ0 */ + 0x0000000a /* EMC_DLL_XFORM_DQ1 */ + 0x0000000a /* EMC_DLL_XFORM_DQ2 */ + 0x0000000a /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0600013d /* EMC_XM2DQSPADCTRL2 */ + 0x22220000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f501 /* EMC_XM2COMPPADCTRL */ + 0x07077404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x08000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00f0000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x8000308c /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff49 /* EMC_CFG_RSV */ + >; + }; + }; + emc-timings-1 { + nvidia,ram-code = <1>; /* Hynix M RAM */ + timing-25500000 { + clock-frequency = <25500000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000001 /* EMC_RC */ + 0x00000006 /* EMC_RFC */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x000000c0 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000007 /* EMC_TXSR */ + 0x00000007 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000002 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x000000c7 /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000287 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-51000000 { + clock-frequency = <51000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000002 /* EMC_RC */ + 0x0000000d /* EMC_RFC */ + 0x00000001 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000181 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000000e /* EMC_TXSR */ + 0x0000000e /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000003 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000018e /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x8000040b /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000004 /* EMC_RC */ + 0x0000001a /* EMC_RFC */ + 0x00000003 /* EMC_RAS */ + 0x00000001 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000001 /* EMC_RD_RCD */ + 0x00000001 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000303 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000001c /* EMC_TXSR */ + 0x0000001c /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000031c /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000713 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000009 /* EMC_RC */ + 0x00000035 /* EMC_RFC */ + 0x00000007 /* EMC_RAS */ + 0x00000002 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000002 /* EMC_RD_RCD */ + 0x00000002 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000607 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000038 /* EMC_TXSR */ + 0x00000038 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000009 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000638 /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000006 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x004400a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00080000 /* EMC_DLL_XFORM_DQS0 */ + 0x00080000 /* EMC_DLL_XFORM_DQS1 */ + 0x00080000 /* EMC_DLL_XFORM_DQS2 */ + 0x00080000 /* EMC_DLL_XFORM_DQS3 */ + 0x00080000 /* EMC_DLL_XFORM_DQS4 */ + 0x00080000 /* EMC_DLL_XFORM_DQS5 */ + 0x00080000 /* EMC_DLL_XFORM_DQS6 */ + 0x00080000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-400000000 { + clock-frequency = <400000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-configuration = < + 0x00000012 /* EMC_RC */ + 0x00000066 /* EMC_RFC */ + 0x0000000c /* EMC_RAS */ + 0x00000004 /* EMC_RP */ + 0x00000003 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000a /* EMC_W2P */ + 0x00000004 /* EMC_RD_RCD */ + 0x00000004 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000004 /* EMC_WDV */ + 0x00000006 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000c /* EMC_RDV */ + 0x00000bf0 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000008 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000006c /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000010 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000c30 /* EMC_TREFBW */ + 0x00000000 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00007088 /* EMC_FBIO_CFG5 */ + 0x001d0084 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0003c000 /* EMC_DLL_XFORM_DQS0 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS1 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS2 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS3 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS4 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS5 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS6 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00048000 /* EMC_DLL_XFORM_DQ0 */ + 0x00048000 /* EMC_DLL_XFORM_DQ1 */ + 0x00048000 /* EMC_DLL_XFORM_DQ2 */ + 0x00048000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800013d /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f508 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x08000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0158000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff89 /* EMC_CFG_RSV */ + >; + }; + timing-800000000 { + clock-frequency = <800000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200018>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-configuration = < + 0x00000025 /* EMC_RC */ + 0x000000ce /* EMC_RFC */ + 0x0000001a /* EMC_RAS */ + 0x00000009 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000d /* EMC_W2R */ + 0x00000004 /* EMC_R2P */ + 0x00000013 /* EMC_W2P */ + 0x00000009 /* EMC_RD_RCD */ + 0x00000009 /* EMC_WR_RCD */ + 0x00000004 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000007 /* EMC_WDV */ + 0x0000000a /* EMC_QUSE */ + 0x00000009 /* EMC_QRST */ + 0x0000000b /* EMC_QSAFE */ + 0x00000011 /* EMC_RDV */ + 0x00001820 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000003 /* EMC_PDEX2WR */ + 0x00000012 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000f /* EMC_AR2PDEN */ + 0x00000018 /* EMC_RW2PDEN */ + 0x000000d8 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000020 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000007 /* EMC_TCLKSTABLE */ + 0x00000008 /* EMC_TCLKSTOP */ + 0x00001860 /* EMC_TREFBW */ + 0x0000000b /* EMC_QUSE_EXTRA */ + 0x00000006 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00005088 /* EMC_FBIO_CFG5 */ + 0xf0070191 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000800a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQ0 */ + 0x0000000a /* EMC_DLL_XFORM_DQ1 */ + 0x0000000a /* EMC_DLL_XFORM_DQ2 */ + 0x0000000a /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0600013d /* EMC_XM2DQSPADCTRL2 */ + 0x22220000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f501 /* EMC_XM2COMPPADCTRL */ + 0x07077404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x08000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00f0000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x8000308c /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff49 /* EMC_CFG_RSV */ + >; + }; + }; + emc-timings-2 { + nvidia,ram-code = <2>; /* Hynix A RAM */ + timing-25500000 { + clock-frequency = <25500000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000001 /* EMC_RC */ + 0x00000007 /* EMC_RFC */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x000000c0 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000008 /* EMC_TXSR */ + 0x00000008 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000002 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x000000c7 /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000287 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-51000000 { + clock-frequency = <51000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000002 /* EMC_RC */ + 0x0000000f /* EMC_RFC */ + 0x00000001 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000181 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000010 /* EMC_TXSR */ + 0x00000010 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000003 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000018e /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x8000040b /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000004 /* EMC_RC */ + 0x0000001e /* EMC_RFC */ + 0x00000003 /* EMC_RAS */ + 0x00000001 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000001 /* EMC_RD_RCD */ + 0x00000001 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000303 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000020 /* EMC_TXSR */ + 0x00000020 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000031c /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000713 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-configuration = < + 0x00000009 /* EMC_RC */ + 0x0000003d /* EMC_RFC */ + 0x00000007 /* EMC_RAS */ + 0x00000002 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000002 /* EMC_RD_RCD */ + 0x00000002 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000607 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000040 /* EMC_TXSR */ + 0x00000040 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000009 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000638 /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000006 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x004400a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00080000 /* EMC_DLL_XFORM_DQS0 */ + 0x00080000 /* EMC_DLL_XFORM_DQS1 */ + 0x00080000 /* EMC_DLL_XFORM_DQS2 */ + 0x00080000 /* EMC_DLL_XFORM_DQS3 */ + 0x00080000 /* EMC_DLL_XFORM_DQS4 */ + 0x00080000 /* EMC_DLL_XFORM_DQS5 */ + 0x00080000 /* EMC_DLL_XFORM_DQS6 */ + 0x00080000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + timing-400000000 { + clock-frequency = <400000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-configuration = < + 0x00000012 /* EMC_RC */ + 0x00000076 /* EMC_RFC */ + 0x0000000c /* EMC_RAS */ + 0x00000004 /* EMC_RP */ + 0x00000003 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000a /* EMC_W2P */ + 0x00000004 /* EMC_RD_RCD */ + 0x00000004 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000004 /* EMC_WDV */ + 0x00000006 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000c /* EMC_RDV */ + 0x00000bf0 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000008 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000007c /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000010 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000c30 /* EMC_TREFBW */ + 0x00000000 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00007088 /* EMC_FBIO_CFG5 */ + 0x001d0084 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00044000 /* EMC_DLL_XFORM_DQS0 */ + 0x00044000 /* EMC_DLL_XFORM_DQS1 */ + 0x00044000 /* EMC_DLL_XFORM_DQS2 */ + 0x00044000 /* EMC_DLL_XFORM_DQS3 */ + 0x00044000 /* EMC_DLL_XFORM_DQS4 */ + 0x00044000 /* EMC_DLL_XFORM_DQS5 */ + 0x00044000 /* EMC_DLL_XFORM_DQS6 */ + 0x00044000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00058000 /* EMC_DLL_XFORM_DQ0 */ + 0x00058000 /* EMC_DLL_XFORM_DQ1 */ + 0x00058000 /* EMC_DLL_XFORM_DQ2 */ + 0x00058000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800013d /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f508 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x08000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0148000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff89 /* EMC_CFG_RSV */ + >; + }; + timing-800000000 { + clock-frequency = <800000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200018>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-configuration = < + 0x00000025 /* EMC_RC */ + 0x000000ee /* EMC_RFC */ + 0x0000001a /* EMC_RAS */ + 0x00000009 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000d /* EMC_W2R */ + 0x00000004 /* EMC_R2P */ + 0x00000013 /* EMC_W2P */ + 0x00000009 /* EMC_RD_RCD */ + 0x00000009 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000007 /* EMC_WDV */ + 0x0000000a /* EMC_QUSE */ + 0x00000009 /* EMC_QRST */ + 0x0000000b /* EMC_QSAFE */ + 0x00000011 /* EMC_RDV */ + 0x00001820 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000003 /* EMC_PDEX2WR */ + 0x00000012 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000f /* EMC_AR2PDEN */ + 0x00000018 /* EMC_RW2PDEN */ + 0x000000f8 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000020 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000007 /* EMC_TCLKSTABLE */ + 0x00000008 /* EMC_TCLKSTOP */ + 0x00001860 /* EMC_TREFBW */ + 0x0000000b /* EMC_QUSE_EXTRA */ + 0x00000006 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00005088 /* EMC_FBIO_CFG5 */ + 0xf0070191 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000c /* EMC_DLL_XFORM_DQS0 */ + 0x007fc00a /* EMC_DLL_XFORM_DQS1 */ + 0x00000008 /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQ0 */ + 0x0000000c /* EMC_DLL_XFORM_DQ1 */ + 0x0000000a /* EMC_DLL_XFORM_DQ2 */ + 0x0000000a /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0600013d /* EMC_XM2DQSPADCTRL2 */ + 0x22220000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f501 /* EMC_XM2COMPPADCTRL */ + 0x07077404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x0a000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00d0000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x8000308c /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff49 /* EMC_CFG_RSV */ + >; + }; + }; +}; +&state_default { + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "blink"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_sclk_pa3 { + nvidia,pins = "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_a17_pb0 { + nvidia,pins = "gmi_a17_pb0"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_a18_pb1 { + nvidia,pins = "gmi_a18_pb1"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_pwr0_pb2 { + nvidia,pins = "lcd_pwr0_pb2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_pclk_pb3 { + nvidia,pins = "lcd_pclk_pb3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat3_pb4 { + nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat2_pb5 { + nvidia,pins = "sdmmc3_dat2_pb5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat1_pb6 { + nvidia,pins = "sdmmc3_dat1_pb6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat0_pb7 { + nvidia,pins = "sdmmc3_dat0_pb7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_pwr1_pc1 { + nvidia,pins = "lcd_pwr1_pc1"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_pwr2_pc6 { + nvidia,pins = "lcd_pwr2_pc6"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_wp_n_pc7 { + nvidia,pins = "gmi_wp_n_pc7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat5_pd0 { + nvidia,pins = "sdmmc3_dat5_pd0"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat4_pd1 { + nvidia,pins = "sdmmc3_dat4_pd1"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_dc1_pd2 { + nvidia,pins = "lcd_dc1_pd2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat6_pd3 { + nvidia,pins = "sdmmc3_dat6_pd3"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat7_pd4 { + nvidia,pins = "sdmmc3_dat7_pd4"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d1_pd5 { + nvidia,pins = "vi_d1_pd5"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_vsync_pd6 { + nvidia,pins = "vi_vsync_pd6"; + nvidia,function = "ddr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_hsync_pd7 { + nvidia,pins = "vi_hsync_pd7"; + nvidia,function = "ddr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d0_pe0 { + nvidia,pins = "lcd_d0_pe0"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d1_pe1 { + nvidia,pins = "lcd_d1_pe1"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d2_pe2 { + nvidia,pins = "lcd_d2_pe2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d3_pe3 { + nvidia,pins = "lcd_d3_pe3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d4_pe4 { + nvidia,pins = "lcd_d4_pe4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d5_pe5 { + nvidia,pins = "lcd_d5_pe5"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d6_pe6 { + nvidia,pins = "lcd_d6_pe6"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d7_pe7 { + nvidia,pins = "lcd_d7_pe7"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d8_pf0 { + nvidia,pins = "lcd_d8_pf0"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d9_pf1 { + nvidia,pins = "lcd_d9_pf1"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d10_pf2 { + nvidia,pins = "lcd_d10_pf2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d11_pf3 { + nvidia,pins = "lcd_d11_pf3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d12_pf4 { + nvidia,pins = "lcd_d12_pf4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d13_pf5 { + nvidia,pins = "lcd_d13_pf5"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d14_pf6 { + nvidia,pins = "lcd_d14_pf6"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d15_pf7 { + nvidia,pins = "lcd_d15_pf7"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad0_pg0 { + nvidia,pins = "gmi_ad0_pg0"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad1_pg1 { + nvidia,pins = "gmi_ad1_pg1"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad2_pg2 { + nvidia,pins = "gmi_ad2_pg2"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad3_pg3 { + nvidia,pins = "gmi_ad3_pg3"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad4_pg4 { + nvidia,pins = "gmi_ad4_pg4"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad5_pg5 { + nvidia,pins = "gmi_ad5_pg5"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad6_pg6 { + nvidia,pins = "gmi_ad6_pg6"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad7_pg7 { + nvidia,pins = "gmi_ad7_pg7"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad8_ph0 { + nvidia,pins = "gmi_ad8_ph0"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad9_ph1 { + nvidia,pins = "gmi_ad9_ph1"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad10_ph2 { + nvidia,pins = "gmi_ad10_ph2"; + nvidia,function = "pwm2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad11_ph3 { + nvidia,pins = "gmi_ad11_ph3"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad12_ph4 { + nvidia,pins = "gmi_ad12_ph4"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad13_ph5 { + nvidia,pins = "gmi_ad13_ph5"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad14_ph6 { + nvidia,pins = "gmi_ad14_ph6"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_wr_n_pi0 { + nvidia,pins = "gmi_wr_n_pi0"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_oe_n_pi1 { + nvidia,pins = "gmi_oe_n_pi1"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_dqs_pi2 { + nvidia,pins = "gmi_dqs_pi2"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_iordy_pi5 { + nvidia,pins = "gmi_iordy_pi5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_cs7_n_pi6 { + nvidia,pins = "gmi_cs7_n_pi6"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_wait_pi7 { + nvidia,pins = "gmi_wait_pi7"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_de_pj1 { + nvidia,pins = "lcd_de_pj1"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_cs1_n_pj2 { + nvidia,pins = "gmi_cs1_n_pj2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_hsync_pj3 { + nvidia,pins = "lcd_hsync_pj3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_vsync_pj4 { + nvidia,pins = "lcd_vsync_pj4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_a16_pj7 { + nvidia,pins = "gmi_a16_pj7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_adv_n_pk0 { + nvidia,pins = "gmi_adv_n_pk0"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_clk_pk1 { + nvidia,pins = "gmi_clk_pk1"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_cs2_n_pk3 { + nvidia,pins = "gmi_cs2_n_pk3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_cs3_n_pk4 { + nvidia,pins = "gmi_cs3_n_pk4"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_out_pk5 { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_a19_pk7 { + nvidia,pins = "gmi_a19_pk7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d2_pl0 { + nvidia,pins = "vi_d2_pl0"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d3_pl1 { + nvidia,pins = "vi_d3_pl1"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d4_pl2 { + nvidia,pins = "vi_d4_pl2"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d5_pl3 { + nvidia,pins = "vi_d5_pl3"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d6_pl4 { + nvidia,pins = "vi_d6_pl4"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d7_pl5 { + nvidia,pins = "vi_d7_pl5"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d8_pl6 { + nvidia,pins = "vi_d8_pl6"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d9_pl7 { + nvidia,pins = "vi_d9_pl7"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d16_pm0 { + nvidia,pins = "lcd_d16_pm0"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d17_pm1 { + nvidia,pins = "lcd_d17_pm1"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d18_pm2 { + nvidia,pins = "lcd_d18_pm2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d19_pm3 { + nvidia,pins = "lcd_d19_pm3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d20_pm4 { + nvidia,pins = "lcd_d20_pm4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d21_pm5 { + nvidia,pins = "lcd_d21_pm5"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d22_pm6 { + nvidia,pins = "lcd_d22_pm6"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_d23_pm7 { + nvidia,pins = "lcd_d23_pm7"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_fs_pn0 { + nvidia,pins = "dap1_fs_pn0"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_sclk_pn3 { + nvidia,pins = "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_cs0_n_pn4 { + nvidia,pins = "lcd_cs0_n_pn4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_sdout_pn5 { + nvidia,pins = "lcd_sdout_pn5"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_dc0_pn6 { + nvidia,pins = "lcd_dc0_pn6"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "hdmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data7_po0 { + nvidia,pins = "ulpi_data7_po0"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data0_po1 { + nvidia,pins = "ulpi_data0_po1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data1_po2 { + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data2_po3 { + nvidia,pins = "ulpi_data2_po3"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data3_po4 { + nvidia,pins = "ulpi_data3_po4"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data4_po5 { + nvidia,pins = "ulpi_data4_po5"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data5_po6 { + nvidia,pins = "ulpi_data5_po6"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data6_po7 { + nvidia,pins = "ulpi_data6_po7"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_din_pp1 { + nvidia,pins = "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_dout_pp2 { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_sclk_pp3 { + nvidia,pins = "dap3_sclk_pp3"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_fs_pp4 { + nvidia,pins = "dap4_fs_pp4"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_dout_pp6 { + nvidia,pins = "dap4_dout_pp6"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_sclk_pp7 { + nvidia,pins = "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col1_pq1 { + nvidia,pins = "kb_col1_pq1"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col2_pq2 { + nvidia,pins = "kb_col2_pq2"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col3_pq3 { + nvidia,pins = "kb_col3_pq3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col6_pq6 { + nvidia,pins = "kb_col6_pq6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col7_pq7 { + nvidia,pins = "kb_col7_pq7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row0_pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row1_pr1 { + nvidia,pins = "kb_row1_pr1"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row2_pr2 { + nvidia,pins = "kb_row2_pr2"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row4_pr4 { + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row5_pr5 { + nvidia,pins = "kb_row5_pr5"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row6_pr6 { + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row8_ps0 { + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row11_ps3 { + nvidia,pins = "kb_row11_ps3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row12_ps4 { + nvidia,pins = "kb_row12_ps4"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row13_ps5 { + nvidia,pins = "kb_row13_ps5"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row14_ps6 { + nvidia,pins = "kb_row14_ps6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row15_ps7 { + nvidia,pins = "kb_row15_ps7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_pclk_pt0 { + nvidia,pins = "vi_pclk_pt0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_mclk_pt1 { + nvidia,pins = "vi_mclk_pt1"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d10_pt2 { + nvidia,pins = "vi_d10_pt2"; + nvidia,function = "ddr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_d11_pt3 { + nvidia,pins = "vi_d11_pt3"; + nvidia,function = "ddr"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_d0_pt4 { + nvidia,pins = "vi_d0_pt4"; + nvidia,function = "ddr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gen2_i2c_sda_pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + pu0 { + nvidia,pins = "pu0"; + nvidia,function = "owr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu1 { + nvidia,pins = "pu1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu2 { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu5 { + nvidia,pins = "pu5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu6 { + nvidia,pins = "pu6"; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + jtag_rtck_pu7 { + nvidia,pins = "jtag_rtck_pu7"; + nvidia,function = "rtck"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pv2 { + nvidia,pins = "pv2"; + nvidia,function = "owr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pv3 { + nvidia,pins = "pv3"; + nvidia,function = "clk_12m_out"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ddc_sda_pv5 { + nvidia,pins = "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + crt_hsync_pv6 { + nvidia,pins = "crt_hsync_pv6"; + nvidia,function = "crt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + crt_vsync_pv7 { + nvidia,pins = "crt_vsync_pv7"; + nvidia,function = "crt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_cs1_n_pw0 { + nvidia,pins = "lcd_cs1_n_pw0"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_m1_pw1 { + nvidia,pins = "lcd_m1_pw1"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spi2_cs1_n_pw2 { + nvidia,pins = "spi2_cs1_n_pw2"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk1_out_pw4 { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_txd_pw6 { + nvidia,pins = "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_rxd_pw7 { + nvidia,pins = "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + spi2_sck_px2 { + nvidia,pins = "spi2_sck_px2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spi1_mosi_px4 { + nvidia,pins = "spi1_mosi_px4"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spi1_sck_px5 { + nvidia,pins = "spi1_sck_px5"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spi1_cs0_n_px6 { + nvidia,pins = "spi1_cs0_n_px6"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spi1_miso_px7 { + nvidia,pins = "spi1_miso_px7"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_nxt_py2 { + nvidia,pins = "ulpi_nxt_py2"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat3_py4 { + nvidia,pins = "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat2_py5 { + nvidia,pins = "sdmmc1_dat2_py5"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat1_py6 { + nvidia,pins = "sdmmc1_dat1_py6"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat0_py7 { + nvidia,pins = "sdmmc1_dat0_py7"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_sdin_pz2 { + nvidia,pins = "lcd_sdin_pz2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_wr_n_pz3 { + nvidia,pins = "lcd_wr_n_pz3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_sck_pz4 { + nvidia,pins = "lcd_sck_pz4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sys_clk_req_pz5 { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "sysclk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pwr_i2c_sda_pz7 { + nvidia,pins = "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_dat1_paa1 { + nvidia,pins = "sdmmc4_dat1_paa1"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_dat2_paa2 { + nvidia,pins = "sdmmc4_dat2_paa2"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_dat3_paa3 { + nvidia,pins = "sdmmc4_dat3_paa3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_dat4_paa4 { + nvidia,pins = "sdmmc4_dat4_paa4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_dat5_paa5 { + nvidia,pins = "sdmmc4_dat5_paa5"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_dat6_paa6 { + nvidia,pins = "sdmmc4_dat6_paa6"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_dat7_paa7 { + nvidia,pins = "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + pbb0 { + nvidia,pins = "pbb0"; + nvidia,function = "i2s4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_sda_pbb2 { + nvidia,pins = "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pbb3 { + nvidia,pins = "pbb3"; + nvidia,function = "vgp3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "vgp5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb6 { + nvidia,pins = "pbb6"; + nvidia,function = "vgp6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb7 { + nvidia,pins = "pbb7"; + nvidia,function = "i2s4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc1 { + nvidia,pins = "pcc1"; + nvidia,function = "i2s4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pcc2 { + nvidia,pins = "pcc2"; + nvidia,function = "i2s4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_rst_n_pcc3 { + nvidia,pins = "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-reset = <TEGRA_PIN_DISABLE>; + }; + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "dap"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l2_rst_n_pcc6 { + nvidia,pins = "pex_l2_rst_n_pcc6"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l2_clkreq_n_pcc7 { + nvidia,pins = "pex_l2_clkreq_n_pcc7"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l0_prsnt_n_pdd0 { + nvidia,pins = "pex_l0_prsnt_n_pdd0"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l0_rst_n_pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l0_clkreq_n_pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_wake_n_pdd3 { + nvidia,pins = "pex_wake_n_pdd3"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l1_prsnt_n_pdd4 { + nvidia,pins = "pex_l1_prsnt_n_pdd4"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l1_rst_n_pdd5 { + nvidia,pins = "pex_l1_rst_n_pdd5"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l1_clkreq_n_pdd6 { + nvidia,pins = "pex_l1_clkreq_n_pdd6"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l2_prsnt_n_pdd7 { + nvidia,pins = "pex_l2_prsnt_n_pdd7"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "dev3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk1_req_pee2 { + nvidia,pins = "clk1_req_pee2"; + nvidia,function = "dap"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "owr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + drive_groups { + nvidia,pins = "drive_gma", + "drive_gmb", + "drive_gmc", + "drive_gmd"; + nvidia,pull-down-strength = <9>; + nvidia,pull-up-strength = <9>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>; + }; +}; + +&emc_icc_dvfs_opp_table { + /delete-node/ opp@900000000,1350; +}; + +&emc_bw_dfs_opp_table { + /delete-node/ opp@900000000; +}; diff --git a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi new file mode 100644 index 000000000000..cbe84d25e726 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi @@ -0,0 +1,383 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + emc_icc_dvfs_opp_table: emc-dvfs-opp-table { + compatible = "operating-points-v2"; + + opp@12750000,950 { + opp-microvolt = <950000 950000 1350000>; + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x0006>; + }; + + opp@12750000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x0001>; + }; + + opp@12750000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x0008>; + }; + + opp@25500000,950 { + opp-microvolt = <950000 950000 1350000>; + opp-hz = /bits/ 64 <25500000>; + opp-supported-hw = <0x0006>; + }; + + opp@25500000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <25500000>; + opp-supported-hw = <0x0001>; + }; + + opp@25500000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <25500000>; + opp-supported-hw = <0x0008>; + }; + + opp@27000000,950 { + opp-microvolt = <950000 950000 1350000>; + opp-hz = /bits/ 64 <27000000>; + opp-supported-hw = <0x0006>; + }; + + opp@27000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <27000000>; + opp-supported-hw = <0x0001>; + }; + + opp@27000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <27000000>; + opp-supported-hw = <0x0008>; + }; + + opp@51000000,950 { + opp-microvolt = <950000 950000 1350000>; + opp-hz = /bits/ 64 <51000000>; + opp-supported-hw = <0x0006>; + }; + + opp@51000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <51000000>; + opp-supported-hw = <0x0001>; + }; + + opp@51000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <51000000>; + opp-supported-hw = <0x0008>; + }; + + opp@54000000,950 { + opp-microvolt = <950000 950000 1350000>; + opp-hz = /bits/ 64 <54000000>; + opp-supported-hw = <0x0006>; + }; + + opp@54000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <54000000>; + opp-supported-hw = <0x0001>; + }; + + opp@54000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <54000000>; + opp-supported-hw = <0x0008>; + }; + + opp@102000000,950 { + opp-microvolt = <950000 950000 1350000>; + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x0006>; + }; + + opp@102000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x0001>; + }; + + opp@102000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x0008>; + }; + + opp@108000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <108000000>; + opp-supported-hw = <0x0007>; + }; + + opp@108000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <108000000>; + opp-supported-hw = <0x0008>; + }; + + opp@204000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x0007>; + }; + + opp@204000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x0008>; + }; + + opp@333500000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <333500000>; + opp-supported-hw = <0x0006>; + }; + + opp@333500000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <333500000>; + opp-supported-hw = <0x0001>; + }; + + opp@333500000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <333500000>; + opp-supported-hw = <0x0008>; + }; + + opp@375000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <375000000>; + opp-supported-hw = <0x0006>; + }; + + opp@375000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <375000000>; + opp-supported-hw = <0x0001>; + }; + + opp@375000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <375000000>; + opp-supported-hw = <0x0008>; + }; + + opp@400000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <400000000>; + opp-supported-hw = <0x0006>; + }; + + opp@400000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <400000000>; + opp-supported-hw = <0x0001>; + }; + + opp@400000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <400000000>; + opp-supported-hw = <0x0008>; + }; + + opp@416000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <416000000>; + opp-supported-hw = <0x0007>; + }; + + opp@416000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <416000000>; + opp-supported-hw = <0x0008>; + }; + + opp@450000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <450000000>; + opp-supported-hw = <0x0007>; + }; + + opp@450000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <450000000>; + opp-supported-hw = <0x0008>; + }; + + opp@533000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <533000000>; + opp-supported-hw = <0x0007>; + }; + + opp@533000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <533000000>; + opp-supported-hw = <0x0008>; + }; + + opp@625000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <625000000>; + opp-supported-hw = <0x0006>; + }; + + opp@625000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <625000000>; + opp-supported-hw = <0x0008>; + }; + + opp@667000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <667000000>; + opp-supported-hw = <0x0006>; + }; + + opp@750000000,1300 { + opp-microvolt = <1300000 1300000 1350000>; + opp-hz = /bits/ 64 <750000000>; + opp-supported-hw = <0x0004>; + }; + + opp@800000000,1300 { + opp-microvolt = <1300000 1300000 1350000>; + opp-hz = /bits/ 64 <800000000>; + opp-supported-hw = <0x0004>; + }; + + opp@900000000,1350 { + opp-microvolt = <1350000 1350000 1350000>; + opp-hz = /bits/ 64 <900000000>; + opp-supported-hw = <0x0004>; + }; + }; + + emc_bw_dfs_opp_table: emc-bandwidth-opp-table { + compatible = "operating-points-v2"; + + opp@12750000 { + opp-hz = /bits/ 64 <12750000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <102000>; + }; + + opp@25500000 { + opp-hz = /bits/ 64 <25500000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <204000>; + }; + + opp@27000000 { + opp-hz = /bits/ 64 <27000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <216000>; + }; + + opp@51000000 { + opp-hz = /bits/ 64 <51000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <408000>; + }; + + opp@54000000 { + opp-hz = /bits/ 64 <54000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <432000>; + }; + + opp@102000000 { + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <816000>; + }; + + opp@108000000 { + opp-hz = /bits/ 64 <108000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <864000>; + }; + + opp@204000000 { + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <1632000>; + }; + + opp@333500000 { + opp-hz = /bits/ 64 <333500000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <2668000>; + }; + + opp@375000000 { + opp-hz = /bits/ 64 <375000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <3000000>; + }; + + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <3200000>; + }; + + opp@416000000 { + opp-hz = /bits/ 64 <416000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <3328000>; + }; + + opp@450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <3600000>; + }; + + opp@533000000 { + opp-hz = /bits/ 64 <533000000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <4264000>; + }; + + opp@625000000 { + opp-hz = /bits/ 64 <625000000>; + opp-supported-hw = <0x000E>; + opp-peak-kBps = <5000000>; + }; + + opp@667000000 { + opp-hz = /bits/ 64 <667000000>; + opp-supported-hw = <0x0006>; + opp-peak-kBps = <5336000>; + }; + + opp@750000000 { + opp-hz = /bits/ 64 <750000000>; + opp-supported-hw = <0x0004>; + opp-peak-kBps = <6000000>; + }; + + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-supported-hw = <0x0004>; + opp-peak-kBps = <6400000>; + }; + + opp@900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-supported-hw = <0x0004>; + opp-peak-kBps = <7200000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index aeae8c092d41..44a6dbba7081 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -6,6 +6,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/soc/tegra-pmc.h> +#include "tegra30-peripherals-opp.dtsi" + / { compatible = "nvidia,tegra30"; interrupt-parent = <&lic>; @@ -210,6 +212,17 @@ nvidia,head = <0>; + interconnects = <&mc TEGRA30_MC_DISPLAY0A &emc>, + <&mc TEGRA30_MC_DISPLAY0B &emc>, + <&mc TEGRA30_MC_DISPLAY1B &emc>, + <&mc TEGRA30_MC_DISPLAY0C &emc>, + <&mc TEGRA30_MC_DISPLAYHC &emc>; + interconnect-names = "wina", + "winb", + "winb-vfilter", + "winc", + "cursor"; + rgb { status = "disabled"; }; @@ -229,6 +242,17 @@ nvidia,head = <1>; + interconnects = <&mc TEGRA30_MC_DISPLAY0AB &emc>, + <&mc TEGRA30_MC_DISPLAY0BB &emc>, + <&mc TEGRA30_MC_DISPLAY1BB &emc>, + <&mc TEGRA30_MC_DISPLAY0CB &emc>, + <&mc TEGRA30_MC_DISPLAYHCB &emc>; + interconnect-names = "wina", + "winb", + "winb-vfilter", + "winc", + "cursor"; + rgb { status = "disabled"; }; @@ -395,6 +419,9 @@ clock-names = "actmon", "emc"; resets = <&tegra_car TEGRA30_CLK_ACTMON>; reset-names = "actmon"; + operating-points-v2 = <&emc_bw_dfs_opp_table>; + interconnects = <&mc TEGRA30_MC_MPCORER &emc>; + interconnect-names = "cpu-read"; }; gpio: gpio@6000d000 { @@ -748,15 +775,19 @@ #iommu-cells = <1>; #reset-cells = <1>; + #interconnect-cells = <1>; }; - memory-controller@7000f400 { + emc: memory-controller@7000f400 { compatible = "nvidia,tegra30-emc"; reg = <0x7000f400 0x400>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA30_CLK_EMC>; nvidia,memory-controller = <&mc>; + operating-points-v2 = <&emc_icc_dvfs_opp_table>; + + #interconnect-cells = <0>; }; fuse@7000f800 { diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index e500911ce0a5..6f1e0f0d4f0a 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -406,6 +406,9 @@ }; }; +&mdio1 { + clock-frequency = <5000000>; +}; &iomuxc { pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 { diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 2259d11af721..d53f9c9db8bf 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -95,7 +95,7 @@ status = "disabled"; }; - can0: flexcan@40020000 { + can0: can@40020000 { compatible = "fsl,vf610-flexcan"; reg = <0x40020000 0x4000>; interrupts = <58 IRQ_TYPE_LEVEL_HIGH>; @@ -293,7 +293,7 @@ status = "disabled"; }; - wdoga5: wdog@4003e000 { + wdoga5: watchdog@4003e000 { compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; reg = <0x4003e000 0x1000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; @@ -681,7 +681,7 @@ status = "disabled"; }; - can1: flexcan@400d4000 { + can1: can@400d4000 { compatible = "fsl,vf610-flexcan"; reg = <0x400d4000 0x4000>; interrupts = <59 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index db3899b07992..df9ad831cf05 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -92,7 +92,7 @@ }; }; - amba: amba { + amba: axi { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 27cd6cb52f1b..cf70aff26c66 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -49,7 +49,7 @@ leds { compatible = "gpio-leds"; - ds23 { + led-ds23 { label = "ds23"; gpios = <&gpio0 10 0>; linux,default-trigger = "heartbeat"; @@ -66,6 +66,12 @@ ocm: sram@fffc0000 { compatible = "mmio-sram"; reg = <0xfffc0000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfffc0000 0x10000>; + ocm-sram@0 { + reg = <0x0 0x10000>; + }; }; }; diff --git a/arch/arm/boot/dts/zynq-zc770-xm011.dts b/arch/arm/boot/dts/zynq-zc770-xm011.dts index b7f65862c022..56732e8f6ca1 100644 --- a/arch/arm/boot/dts/zynq-zc770-xm011.dts +++ b/arch/arm/boot/dts/zynq-zc770-xm011.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Xilinx ZC770 XM013 board DTS + * Xilinx ZC770 XM011 board DTS * * Copyright (C) 2013-2018 Xilinx, Inc. */ diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts index 4ae2c85df3a0..38d96adc870c 100644 --- a/arch/arm/boot/dts/zynq-zc770-xm013.dts +++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts @@ -63,13 +63,12 @@ num-cs = <4>; is-decoded-cs = <0>; eeprom: eeprom@2 { - at25,byte-len = <8192>; - at25,addr-mode = <2>; - at25,page-size = <32>; - compatible = "atmel,at25"; reg = <2>; spi-max-frequency = <1000000>; + size = <8192>; + address-width = <16>; + pagesize = <32>; }; }; diff --git a/arch/arm/boot/dts/zynq-zturn-common.dtsi b/arch/arm/boot/dts/zynq-zturn-common.dtsi new file mode 100644 index 000000000000..bf5d1c4568b0 --- /dev/null +++ b/arch/arm/boot/dts/zynq-zturn-common.dtsi @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com> + * Copyright (C) 2017 Alexander Graf <agraf@suse.de> + * + * Based on zynq-zed.dts which is: + * Copyright (C) 2011 - 2014 Xilinx + * Copyright (C) 2012 National Instruments Corp. + * + */ + +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + compatible = "xlnx,zynq-7000"; + + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + serial1 = &uart0; + mmc0 = &sdhci0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-leds { + compatible = "gpio-leds"; + usr-led1 { + label = "usr-led1"; + gpios = <&gpio0 0x0 0x1>; + default-state = "off"; + }; + + usr-led2 { + label = "usr-led2"; + gpios = <&gpio0 0x9 0x1>; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + K1 { + label = "K1"; + gpios = <&gpio0 0x32 0x1>; + linux,code = <0x66>; + wakeup-source; + autorepeat; + }; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + }; +}; + +&sdhci0 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&can0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + stlm75@49 { + status = "okay"; + compatible = "lm75"; + reg = <0x49>; + }; + + accelerometer@53 { + compatible = "adi,adxl345"; + reg = <0x53>; + interrupt-parent = <&intc>; + interrupts = <0x0 0x1e 0x4>; + }; +}; diff --git a/arch/arm/boot/dts/zynq-zturn-v5.dts b/arch/arm/boot/dts/zynq-zturn-v5.dts new file mode 100644 index 000000000000..536632a09a25 --- /dev/null +++ b/arch/arm/boot/dts/zynq-zturn-v5.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; +/include/ "zynq-zturn-common.dtsi" + +/ { + model = "Zynq Z-Turn MYIR Board V5"; + compatible = "myir,zynq-zturn-v5", "xlnx,zynq-7000"; +}; + +&gem0 { + ethernet_phy: ethernet-phy@0 { + reg = <0x3>; + }; +}; diff --git a/arch/arm/boot/dts/zynq-zturn.dts b/arch/arm/boot/dts/zynq-zturn.dts index 5ec616ebca08..620b24a25e06 100644 --- a/arch/arm/boot/dts/zynq-zturn.dts +++ b/arch/arm/boot/dts/zynq-zturn.dts @@ -1,114 +1,15 @@ // SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com> - * Copyright (C) 2017 Alexander Graf <agraf@suse.de> - * - * Based on zynq-zed.dts which is: - * Copyright (C) 2011 - 2014 Xilinx - * Copyright (C) 2012 National Instruments Corp. - * - */ /dts-v1/; -/include/ "zynq-7000.dtsi" +/include/ "zynq-zturn-common.dtsi" / { model = "Zynq Z-Turn MYIR Board"; compatible = "myir,zynq-zturn", "xlnx,zynq-7000"; - - aliases { - ethernet0 = &gem0; - serial0 = &uart1; - serial1 = &uart0; - mmc0 = &sdhci0; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x40000000>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-leds { - compatible = "gpio-leds"; - usr-led1 { - label = "usr-led1"; - gpios = <&gpio0 0x0 0x1>; - default-state = "off"; - }; - - usr-led2 { - label = "usr-led2"; - gpios = <&gpio0 0x9 0x1>; - default-state = "off"; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - K1 { - label = "K1"; - gpios = <&gpio0 0x32 0x1>; - linux,code = <0x66>; - wakeup-source; - autorepeat; - }; - }; -}; - -&clkc { - ps-clk-frequency = <33333333>; }; &gem0 { - status = "okay"; - phy-mode = "rgmii-id"; - phy-handle = <ðernet_phy>; - ethernet_phy: ethernet-phy@0 { reg = <0x0>; }; }; - -&sdhci0 { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - dr_mode = "host"; -}; - -&can0 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - clock-frequency = <400000>; - - stlm75@49 { - status = "okay"; - compatible = "lm75"; - reg = <0x49>; - }; - - accelerometer@53 { - compatible = "adi,adxl345", "adxl345", "adi,adxl34x", "adxl34x"; - reg = <0x53>; - interrupt-parent = <&intc>; - interrupts = <0x0 0x1e 0x4>; - }; -}; diff --git a/arch/arm/boot/dts/zynq-zybo-z7.dts b/arch/arm/boot/dts/zynq-zybo-z7.dts index 357b78a5c11b..7b87e10d3953 100644 --- a/arch/arm/boot/dts/zynq-zybo-z7.dts +++ b/arch/arm/boot/dts/zynq-zybo-z7.dts @@ -25,7 +25,7 @@ gpio-leds { compatible = "gpio-leds"; - ld4 { + led-ld4 { label = "zynq-zybo-z7:green:ld4"; gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 4a0ba2ae1a25..c0c219d53b24 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -124,15 +124,19 @@ CONFIG_MFD_ATMEL_HLCDC=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_SUPPORT_FILTER=y +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_PLATFORM_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_VIDEO_ATMEL_ISI=y +CONFIG_VIDEO_OV2640=m +CONFIG_VIDEO_MT9V032=m CONFIG_DRM=y CONFIG_DRM_ATMEL_HLCDC=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_FB_ATMEL=y CONFIG_BACKLIGHT_ATMEL_LCDC=y -# CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index ef484c4cfd1a..d9119da65f48 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -89,7 +89,6 @@ CONFIG_USB_SERIAL_KEYSPAN=m CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_OMNINET=m CONFIG_EXT2_FS=m CONFIG_EXT3_FS=m diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index 2f7acde2d921..502a9d870ca4 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -87,7 +87,6 @@ CONFIG_FB=y CONFIG_FB_PXA=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_TDO24M=y -# CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_DA903X=m CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig index 0dae3b185284..26e5a67f8e2d 100644 --- a/arch/arm/configs/colibri_pxa300_defconfig +++ b/arch/arm/configs/colibri_pxa300_defconfig @@ -34,7 +34,6 @@ CONFIG_FB=y CONFIG_FB_PXA=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 4fec2ec379ad..911e880f06ed 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -191,7 +191,6 @@ CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_TI=m CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m diff --git a/arch/arm/configs/ebsa110_defconfig b/arch/arm/configs/ebsa110_defconfig deleted file mode 100644 index 731a22a55f4e..000000000000 --- a/arch/arm/configs/ebsa110_defconfig +++ /dev/null @@ -1,74 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -CONFIG_MODULES=y -CONFIG_ARCH_EBSA110=y -CONFIG_PCCARD=m -CONFIG_I82365=m -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs rw mem=16M console=ttyS1,38400n8" -CONFIG_FPE_NWFPE=y -CONFIG_FPE_FASTFPE=y -CONFIG_BINFMT_AOUT=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_SYN_COOKIES=y -CONFIG_IPV6=y -CONFIG_NETFILTER=y -CONFIG_IP_NF_IPTABLES=y -CONFIG_IP_NF_MATCH_ECN=y -CONFIG_IP_NF_MATCH_TTL=y -CONFIG_IP_NF_FILTER=y -CONFIG_IP_NF_TARGET_REJECT=y -CONFIG_IP_NF_TARGET_LOG=y -CONFIG_IP_NF_MANGLE=y -CONFIG_IP_NF_TARGET_ECN=y -CONFIG_IP6_NF_IPTABLES=y -CONFIG_IP6_NF_MATCH_FRAG=y -CONFIG_IP6_NF_MATCH_OPTS=y -CONFIG_IP6_NF_MATCH_HL=y -CONFIG_IP6_NF_MATCH_RT=y -CONFIG_IP6_NF_FILTER=y -CONFIG_IP6_NF_MANGLE=y -CONFIG_FW_LOADER=m -CONFIG_PARPORT=y -CONFIG_PARPORT_PC=y -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_1284=y -CONFIG_BLK_DEV_RAM=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AM79C961A=y -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_PCNET=m -CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_CS=m -CONFIG_PRINTER=m -CONFIG_WATCHDOG=y -CONFIG_SOFT_WATCHDOG=y -CONFIG_AUTOFS4_FS=y -CONFIG_MINIX_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -# CONFIG_MSDOS_PARTITION is not set diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index cf82c9d23a08..513f56b3c059 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -107,6 +107,8 @@ CONFIG_MD=y CONFIG_BLK_DEV_DM=y CONFIG_DM_CRYPT=m CONFIG_NETDEVICES=y +CONFIG_NET_VENDOR_ASIX=y +CONFIG_SPI_AX88796C=y CONFIG_SMSC911X=y CONFIG_USB_RTL8150=m CONFIG_USB_RTL8152=y @@ -125,7 +127,7 @@ CONFIG_KEYBOARD_CROS_EC=y # CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_CYAPA=y CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ATMEL_MXT=y +CONFIG_TOUCHSCREEN_ATMEL_MXT=m CONFIG_TOUCHSCREEN_MMS114=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MAX77693_HAPTIC=y @@ -175,6 +177,8 @@ CONFIG_MFD_MAX77693=y CONFIG_MFD_MAX8997=y CONFIG_MFD_MAX8998=y CONFIG_MFD_SEC_CORE=y +CONFIG_MFD_STMPE=y +CONFIG_STMPE_I2C=y CONFIG_MFD_TPS65090=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y @@ -245,6 +249,7 @@ CONFIG_SND_SOC_SMDK_WM8994_PCM=y CONFIG_SND_SOC_SNOW=y CONFIG_SND_SOC_ODROID=y CONFIG_SND_SOC_ARNDALE=y +CONFIG_SND_SOC_SAMSUNG_MIDAS_WM1811=y CONFIG_SND_SIMPLE_CARD=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y @@ -319,6 +324,7 @@ CONFIG_EXTCON_MAX77693=y CONFIG_EXTCON_MAX8997=y CONFIG_IIO=y CONFIG_EXYNOS_ADC=y +CONFIG_STMPE_ADC=y CONFIG_CM36651=y CONFIG_AK8975=y CONFIG_PWM=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index aeb1209e0804..bb70acc6b526 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -93,6 +93,7 @@ CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_SPI_SPIDEV=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_MXC=y CONFIG_W1=y CONFIG_W1_MASTER_MXC=y CONFIG_W1_SLAVE_THERM=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 0fa79bd00219..221f5c340c86 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -217,6 +217,7 @@ CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCF857X=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_74X164=y +CONFIG_GPIO_MXC=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_SYSCON=y CONFIG_POWER_RESET_SYSCON_POWEROFF=y diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index 27e7c0714b96..0d6edeb27659 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -141,7 +141,6 @@ CONFIG_HDLC_CISCO=m CONFIG_HDLC_FR=m CONFIG_HDLC_PPP=m CONFIG_HDLC_X25=m -CONFIG_DLCI=m CONFIG_WAN_ROUTER_DRIVERS=m CONFIG_ATM_TCP=m # CONFIG_INPUT_KEYBOARD is not set diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig index 9f079be2b84b..069f60ffdcd8 100644 --- a/arch/arm/configs/jornada720_defconfig +++ b/arch/arm/configs/jornada720_defconfig @@ -48,7 +48,6 @@ CONFIG_FB=y CONFIG_FB_S1D13XXX=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index d2e684f6565a..b4670d42f378 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -95,7 +95,6 @@ CONFIG_FB_PXA_OVERLAY=y CONFIG_FB_W100=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_PWM=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 301f29a1fcc3..898490aaa39e 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -158,7 +158,6 @@ CONFIG_FB_S3C2410=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 70b709a669d2..e00be9faa23b 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -166,6 +166,7 @@ CONFIG_SPI_IMX=y CONFIG_SPI_ORION=y CONFIG_GPIO_ASPEED=m CONFIG_GPIO_ASPEED_SGPIO=y +CONFIG_GPIO_MXC=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_QNAP=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index e731cdf7c88c..c5f25710fedc 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -109,6 +109,7 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y CONFIG_CPUFREQ_DT=y CONFIG_ARM_IMX6Q_CPUFREQ=y +CONFIG_ARM_SCMI_CPUFREQ=y CONFIG_ARM_RASPBERRYPI_CPUFREQ=y CONFIG_QORIQ_CPUFREQ=y CONFIG_CPU_IDLE=y @@ -117,6 +118,7 @@ CONFIG_ARM_ZYNQ_CPUIDLE=y CONFIG_ARM_EXYNOS_CPUIDLE=y CONFIG_ARM_TEGRA_CPUIDLE=y CONFIG_KERNEL_MODE_NEON=y +CONFIG_ARM_SCMI_PROTOCOL=y CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_TRUSTED_FOUNDATIONS=y CONFIG_BCM47XX_NVRAM=y @@ -154,6 +156,7 @@ CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_NET_SWITCHDEV=y CONFIG_NET_DSA=m CONFIG_CAN=y CONFIG_CAN_AT91=m @@ -243,6 +246,8 @@ CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y +CONFIG_NET_VENDOR_ASIX=y +CONFIG_SPI_AX88796C=m CONFIG_VIRTIO_NET=y CONFIG_B53_SPI_DRIVER=m CONFIG_B53_MDIO_DRIVER=m @@ -270,9 +275,12 @@ CONFIG_SNI_AVE=y CONFIG_STMMAC_ETH=y CONFIG_DWMAC_DWC_QOS_ETH=y CONFIG_TI_CPSW=y +CONFIG_TI_CPSW_SWITCHDEV=y +CONFIG_TI_CPTS=y CONFIG_XILINX_EMACLITE=y CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y +CONFIG_DP83867_PHY=y CONFIG_MARVELL_PHY=y CONFIG_MICREL_PHY=y CONFIG_AT803X_PHY=y @@ -436,6 +444,7 @@ CONFIG_SPI_TEGRA20_SLINK=y CONFIG_SPI_XILINX=y CONFIG_SPI_SPIDEV=y CONFIG_SPMI=y +CONFIG_PTP_1588_CLOCK=y CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_RZA2=y CONFIG_PINCTRL_STMFX=y @@ -465,6 +474,7 @@ CONFIG_GPIO_PALMAS=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y CONFIG_GPIO_TWL4030=y +CONFIG_GPIO_MXC=y CONFIG_POWER_AVS=y CONFIG_ROCKCHIP_IODOMAIN=y CONFIG_POWER_RESET_AS3722=y @@ -487,6 +497,7 @@ CONFIG_CHARGER_MAX77693=m CONFIG_CHARGER_MAX8997=m CONFIG_CHARGER_MAX8998=m CONFIG_CHARGER_TPS65090=y +CONFIG_SENSORS_ARM_SCMI=y CONFIG_SENSORS_ASPEED=m CONFIG_SENSORS_IIO_HWMON=y CONFIG_SENSORS_LM90=y @@ -556,6 +567,7 @@ CONFIG_MFD_RK808=y CONFIG_MFD_RN5T618=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_STMPE=y +CONFIG_STMPE_I2C=y CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65090=y CONFIG_MFD_TPS65217=y @@ -737,11 +749,14 @@ CONFIG_SND_SOC_SMDK_WM8994_PCM=m CONFIG_SND_SOC_SNOW=m CONFIG_SND_SOC_ODROID=m CONFIG_SND_SOC_ARNDALE=m +CONFIG_SND_SOC_SAMSUNG_MIDAS_WM1811=m CONFIG_SND_SOC_SH4_FSI=m CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_STI=m CONFIG_SND_SOC_STM32_SAI=m CONFIG_SND_SOC_STM32_I2S=m +CONFIG_SND_SOC_STM32_SPDIFRX=m +CONFIG_SND_SOC_STM32_DFSDM=m CONFIG_SND_SUN4I_CODEC=m CONFIG_SND_SOC_TEGRA=m CONFIG_SND_SOC_TEGRA20_I2S=m @@ -769,7 +784,7 @@ CONFIG_USB_XHCI_TEGRA=m CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD_STI=y CONFIG_USB_EHCI_TEGRA=y -CONFIG_USB_EHCI_EXYNOS=y +CONFIG_USB_EHCI_EXYNOS=m CONFIG_USB_EHCI_MV=m CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_STI=y @@ -828,6 +843,8 @@ CONFIG_USB_CONFIGFS_F_HID=y CONFIG_USB_CONFIGFS_F_UVC=y CONFIG_USB_CONFIGFS_F_PRINTER=y CONFIG_USB_ETH=m +CONFIG_TYPEC=m +CONFIG_TYPEC_STUSB160X=m CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y @@ -958,6 +975,7 @@ CONFIG_CROS_EC_I2C=m CONFIG_CROS_EC_SPI=m CONFIG_COMMON_CLK_MAX77686=y CONFIG_COMMON_CLK_RK808=m +CONFIG_COMMON_CLK_SCMI=y CONFIG_COMMON_CLK_S2MPS11=m CONFIG_CLK_RASPBERRYPI=y CONFIG_COMMON_CLK_QCOM=y @@ -1023,6 +1041,7 @@ CONFIG_AT91_SAMA5D2_ADC=m CONFIG_BERLIN2_ADC=m CONFIG_CPCAP_ADC=m CONFIG_EXYNOS_ADC=m +CONFIG_STMPE_ADC=m CONFIG_MESON_SARADC=m CONFIG_ROCKCHIP_SARADC=m CONFIG_STM32_ADC_CORE=m @@ -1095,6 +1114,9 @@ CONFIG_FSI_MASTER_ASPEED=m CONFIG_FSI_SCOM=m CONFIG_FSI_SBEFIFO=m CONFIG_FSI_OCC=m +CONFIG_COUNTER=m +CONFIG_STM32_TIMER_CNT=m +CONFIG_STM32_LPTIMER_CNT=m CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y @@ -1132,6 +1154,9 @@ CONFIG_CRYPTO_DEV_ATMEL_AES=m CONFIG_CRYPTO_DEV_ATMEL_TDES=m CONFIG_CRYPTO_DEV_ATMEL_SHA=m CONFIG_CRYPTO_DEV_ROCKCHIP=m +CONFIG_CRYPTO_DEV_STM32_CRC=m +CONFIG_CRYPTO_DEV_STM32_HASH=m +CONFIG_CRYPTO_DEV_STM32_CRYP=m CONFIG_CMA_SIZE_MBYTES=64 CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 34793aabdb65..1c11d1557779 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -81,7 +81,6 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_BINFMT_MISC=y CONFIG_CMA=y CONFIG_ZSMALLOC=m -CONFIG_ZSMALLOC_PGTABLE_MAPPING=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -314,6 +313,7 @@ CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_USER_SPACE=y CONFIG_CPU_THERMAL=y CONFIG_TI_THERMAL=y +CONFIG_OMAP3_THERMAL=y CONFIG_OMAP4_THERMAL=y CONFIG_OMAP5_THERMAL=y CONFIG_DRA752_THERMAL=y @@ -389,7 +389,6 @@ CONFIG_FB_TILEBLITTING=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=m CONFIG_BACKLIGHT_PWM=m CONFIG_BACKLIGHT_PANDORA=m CONFIG_BACKLIGHT_GPIO=m @@ -524,6 +523,8 @@ CONFIG_TI_AM335X_ADC=m CONFIG_TWL4030_MADC=m CONFIG_SENSORS_ISL29028=m CONFIG_BMP280=m +CONFIG_KXCJK1013=m +CONFIG_AK8975=m CONFIG_PWM=y CONFIG_PWM_OMAP_DMTIMER=m CONFIG_PWM_TIECAP=m @@ -536,6 +537,8 @@ CONFIG_PHY_DM816X_USB=m CONFIG_OMAP_USB2=m CONFIG_TI_PIPE3=y CONFIG_TWL4030_USB=m +CONFIG_COUNTER=m +CONFIG_TI_EQEP=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS_SECURITY=y diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig index 06bbc7a59b60..f0c34017f2aa 100644 --- a/arch/arm/configs/pxa3xx_defconfig +++ b/arch/arm/configs/pxa3xx_defconfig @@ -74,7 +74,6 @@ CONFIG_FB_PXA=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_TDO24M=y CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_DA903X=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index d7b9eaf4783c..8654ece13004 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -574,7 +574,6 @@ CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_TI=m CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index c882167e1496..d6733e745b80 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -159,7 +159,6 @@ CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_LM3630A=y CONFIG_BACKLIGHT_LP855X=y CONFIG_SOUND=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 037d3a718a60..5f6297e6c549 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -153,15 +153,23 @@ CONFIG_REGULATOR_ACT8945A=y CONFIG_REGULATOR_MCP16502=m CONFIG_REGULATOR_PWM=m CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_SUPPORT_FILTER=y +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_PLATFORM_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_ATMEL_ISC=y CONFIG_VIDEO_ATMEL_ISI=y +CONFIG_VIDEO_OV2640=m +CONFIG_VIDEO_OV5640=m +CONFIG_VIDEO_OV7670=m +CONFIG_VIDEO_OV7740=m +CONFIG_VIDEO_MT9V032=m CONFIG_DRM=y CONFIG_DRM_ATMEL_HLCDC=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_SOUND=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 4a161b3c35b9..01a6ebdf033a 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -179,22 +179,22 @@ CONFIG_STAGING=y CONFIG_STAGING_BOARD=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_ARCH_EMEV2=y +CONFIG_ARCH_R8A7794=y +CONFIG_ARCH_R8A7779=y +CONFIG_ARCH_R8A7790=y +CONFIG_ARCH_R8A7778=y +CONFIG_ARCH_R8A7793=y +CONFIG_ARCH_R8A7791=y +CONFIG_ARCH_R8A7792=y +CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A73A4=y CONFIG_ARCH_R7S72100=y CONFIG_ARCH_R7S9210=y -CONFIG_ARCH_R8A73A4=y -CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A77470=y +CONFIG_ARCH_R8A7745=y CONFIG_ARCH_R8A7742=y CONFIG_ARCH_R8A7743=y CONFIG_ARCH_R8A7744=y -CONFIG_ARCH_R8A7745=y -CONFIG_ARCH_R8A77470=y -CONFIG_ARCH_R8A7778=y -CONFIG_ARCH_R8A7779=y -CONFIG_ARCH_R8A7790=y -CONFIG_ARCH_R8A7791=y -CONFIG_ARCH_R8A7792=y -CONFIG_ARCH_R8A7793=y -CONFIG_ARCH_R8A7794=y CONFIG_ARCH_R9A06G032=y CONFIG_ARCH_SH73A0=y CONFIG_IIO=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index a1cdbfa064c5..8b2c14424927 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -185,7 +185,6 @@ CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_TI=m CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 244126172fd6..a60c134c5e04 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -51,6 +51,7 @@ CONFIG_STMMAC_ETH=y # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set CONFIG_MICREL_PHY=y +CONFIG_REALTEK_PHY=y # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_SUN4I_LRADC=y @@ -111,7 +112,6 @@ CONFIG_DRM_SIMPLE_BRIDGE=y CONFIG_DRM_LIMA=y CONFIG_FB_SIMPLE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_PWM=y CONFIG_SOUND=y CONFIG_SND=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index fff5fae0db30..74739a52a8ad 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -205,7 +205,6 @@ CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_LVDS_CODEC=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 28dd7cf56048..bcedfe1422aa 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -12,7 +12,6 @@ CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPUFREQ_DT=y CONFIG_CPU_IDLE=y @@ -60,6 +59,7 @@ CONFIG_KEYBOARD_TC3589X=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y CONFIG_TOUCHSCREEN_BU21013=y +CONFIG_TOUCHSCREEN_CY8CTMA140=y CONFIG_INPUT_MISC=y CONFIG_INPUT_AB8500_PONKEY=y CONFIG_INPUT_GPIO_VIBRA=y @@ -88,11 +88,13 @@ CONFIG_REGULATOR_GPIO=y CONFIG_DRM=y CONFIG_DRM_PANEL_NOVATEK_NT35510=y CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y +CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y +CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=y CONFIG_DRM_PANEL_SONY_ACX424AKP=y CONFIG_DRM_LIMA=y CONFIG_DRM_MCDE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=m +CONFIG_BACKLIGHT_KTD253=y CONFIG_BACKLIGHT_GPIO=y CONFIG_LOGO=y CONFIG_SOUND=y @@ -100,7 +102,6 @@ CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_SOC_UX500=y CONFIG_SND_SOC_UX500_MACH_MOP500=y -CONFIG_USB=y CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_UX500=y CONFIG_MUSB_PIO_ONLY=y @@ -113,6 +114,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_LP55XX_COMMON=y CONFIG_LEDS_LP5521=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y @@ -153,8 +155,8 @@ CONFIG_CRYPTO_DEV_UX500_HASH=y CONFIG_CRYPTO_DEV_UX500_DEBUG=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_FTRACE is not set diff --git a/arch/arm/crypto/aes-ce-core.S b/arch/arm/crypto/aes-ce-core.S index 4d1707388d94..312428d83eed 100644 --- a/arch/arm/crypto/aes-ce-core.S +++ b/arch/arm/crypto/aes-ce-core.S @@ -386,20 +386,32 @@ ENTRY(ce_aes_ctr_encrypt) .Lctrloop4x: subs r4, r4, #4 bmi .Lctr1x - add r6, r6, #1 + + /* + * NOTE: the sequence below has been carefully tweaked to avoid + * a silicon erratum that exists in Cortex-A57 (#1742098) and + * Cortex-A72 (#1655431) cores, where AESE/AESMC instruction pairs + * may produce an incorrect result if they take their input from a + * register of which a single 32-bit lane has been updated the last + * time it was modified. To work around this, the lanes of registers + * q0-q3 below are not manipulated individually, and the different + * counter values are prepared by successive manipulations of q7. + */ + add ip, r6, #1 vmov q0, q7 + rev ip, ip + add lr, r6, #2 + vmov s31, ip @ set lane 3 of q1 via q7 + add ip, r6, #3 + rev lr, lr vmov q1, q7 - rev ip, r6 - add r6, r6, #1 + vmov s31, lr @ set lane 3 of q2 via q7 + rev ip, ip vmov q2, q7 - vmov s7, ip - rev ip, r6 - add r6, r6, #1 + vmov s31, ip @ set lane 3 of q3 via q7 + add r6, r6, #4 vmov q3, q7 - vmov s11, ip - rev ip, r6 - add r6, r6, #1 - vmov s15, ip + vld1.8 {q4-q5}, [r1]! vld1.8 {q6}, [r1]! vld1.8 {q15}, [r1]! diff --git a/arch/arm/crypto/aes-neonbs-glue.c b/arch/arm/crypto/aes-neonbs-glue.c index bda8bf17631e..f70af1d0514b 100644 --- a/arch/arm/crypto/aes-neonbs-glue.c +++ b/arch/arm/crypto/aes-neonbs-glue.c @@ -19,7 +19,7 @@ MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS_CRYPTO("ecb(aes)"); -MODULE_ALIAS_CRYPTO("cbc(aes)"); +MODULE_ALIAS_CRYPTO("cbc(aes)-all"); MODULE_ALIAS_CRYPTO("ctr(aes)"); MODULE_ALIAS_CRYPTO("xts(aes)"); @@ -191,7 +191,8 @@ static int cbc_init(struct crypto_skcipher *tfm) struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); unsigned int reqsize; - ctx->enc_tfm = crypto_alloc_skcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC); + ctx->enc_tfm = crypto_alloc_skcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC | + CRYPTO_ALG_NEED_FALLBACK); if (IS_ERR(ctx->enc_tfm)) return PTR_ERR(ctx->enc_tfm); @@ -441,7 +442,8 @@ static struct skcipher_alg aes_algs[] = { { .base.cra_blocksize = AES_BLOCK_SIZE, .base.cra_ctxsize = sizeof(struct aesbs_cbc_ctx), .base.cra_module = THIS_MODULE, - .base.cra_flags = CRYPTO_ALG_INTERNAL, + .base.cra_flags = CRYPTO_ALG_INTERNAL | + CRYPTO_ALG_NEED_FALLBACK, .min_keysize = AES_MIN_KEY_SIZE, .max_keysize = AES_MAX_KEY_SIZE, diff --git a/arch/arm/crypto/chacha-glue.c b/arch/arm/crypto/chacha-glue.c index 59da6c0b63b6..7b5cf8430c6d 100644 --- a/arch/arm/crypto/chacha-glue.c +++ b/arch/arm/crypto/chacha-glue.c @@ -23,7 +23,7 @@ asmlinkage void chacha_block_xor_neon(const u32 *state, u8 *dst, const u8 *src, int nrounds); asmlinkage void chacha_4block_xor_neon(const u32 *state, u8 *dst, const u8 *src, - int nrounds); + int nrounds, unsigned int nbytes); asmlinkage void hchacha_block_arm(const u32 *state, u32 *out, int nrounds); asmlinkage void hchacha_block_neon(const u32 *state, u32 *out, int nrounds); @@ -42,24 +42,24 @@ static void chacha_doneon(u32 *state, u8 *dst, const u8 *src, { u8 buf[CHACHA_BLOCK_SIZE]; - while (bytes >= CHACHA_BLOCK_SIZE * 4) { - chacha_4block_xor_neon(state, dst, src, nrounds); - bytes -= CHACHA_BLOCK_SIZE * 4; - src += CHACHA_BLOCK_SIZE * 4; - dst += CHACHA_BLOCK_SIZE * 4; - state[12] += 4; - } - while (bytes >= CHACHA_BLOCK_SIZE) { - chacha_block_xor_neon(state, dst, src, nrounds); - bytes -= CHACHA_BLOCK_SIZE; - src += CHACHA_BLOCK_SIZE; - dst += CHACHA_BLOCK_SIZE; - state[12]++; + while (bytes > CHACHA_BLOCK_SIZE) { + unsigned int l = min(bytes, CHACHA_BLOCK_SIZE * 4U); + + chacha_4block_xor_neon(state, dst, src, nrounds, l); + bytes -= l; + src += l; + dst += l; + state[12] += DIV_ROUND_UP(l, CHACHA_BLOCK_SIZE); } if (bytes) { - memcpy(buf, src, bytes); - chacha_block_xor_neon(state, buf, buf, nrounds); - memcpy(dst, buf, bytes); + const u8 *s = src; + u8 *d = dst; + + if (bytes != CHACHA_BLOCK_SIZE) + s = d = memcpy(buf, src, bytes); + chacha_block_xor_neon(state, d, s, nrounds); + if (d != dst) + memcpy(dst, buf, bytes); } } diff --git a/arch/arm/crypto/chacha-neon-core.S b/arch/arm/crypto/chacha-neon-core.S index eb22926d4912..13d12f672656 100644 --- a/arch/arm/crypto/chacha-neon-core.S +++ b/arch/arm/crypto/chacha-neon-core.S @@ -47,6 +47,7 @@ */ #include <linux/linkage.h> +#include <asm/cache.h> .text .fpu neon @@ -205,7 +206,7 @@ ENDPROC(hchacha_block_neon) .align 5 ENTRY(chacha_4block_xor_neon) - push {r4-r5} + push {r4, lr} mov r4, sp // preserve the stack pointer sub ip, sp, #0x20 // allocate a 32 byte buffer bic ip, ip, #0x1f // aligned to 32 bytes @@ -229,10 +230,10 @@ ENTRY(chacha_4block_xor_neon) vld1.32 {q0-q1}, [r0] vld1.32 {q2-q3}, [ip] - adr r5, .Lctrinc + adr lr, .Lctrinc vdup.32 q15, d7[1] vdup.32 q14, d7[0] - vld1.32 {q4}, [r5, :128] + vld1.32 {q4}, [lr, :128] vdup.32 q13, d6[1] vdup.32 q12, d6[0] vdup.32 q11, d5[1] @@ -455,7 +456,7 @@ ENTRY(chacha_4block_xor_neon) // Re-interleave the words in the first two rows of each block (x0..7). // Also add the counter values 0-3 to x12[0-3]. - vld1.32 {q8}, [r5, :128] // load counter values 0-3 + vld1.32 {q8}, [lr, :128] // load counter values 0-3 vzip.32 q0, q1 // => (0 1 0 1) (0 1 0 1) vzip.32 q2, q3 // => (2 3 2 3) (2 3 2 3) vzip.32 q4, q5 // => (4 5 4 5) (4 5 4 5) @@ -493,6 +494,8 @@ ENTRY(chacha_4block_xor_neon) // Re-interleave the words in the last two rows of each block (x8..15). vld1.32 {q8-q9}, [sp, :256] + mov sp, r4 // restore original stack pointer + ldr r4, [r4, #8] // load number of bytes vzip.32 q12, q13 // => (12 13 12 13) (12 13 12 13) vzip.32 q14, q15 // => (14 15 14 15) (14 15 14 15) vzip.32 q8, q9 // => (8 9 8 9) (8 9 8 9) @@ -520,41 +523,121 @@ ENTRY(chacha_4block_xor_neon) // XOR the rest of the data with the keystream vld1.8 {q0-q1}, [r2]! + subs r4, r4, #96 veor q0, q0, q8 veor q1, q1, q12 + ble .Lle96 vst1.8 {q0-q1}, [r1]! vld1.8 {q0-q1}, [r2]! + subs r4, r4, #32 veor q0, q0, q2 veor q1, q1, q6 + ble .Lle128 vst1.8 {q0-q1}, [r1]! vld1.8 {q0-q1}, [r2]! + subs r4, r4, #32 veor q0, q0, q10 veor q1, q1, q14 + ble .Lle160 vst1.8 {q0-q1}, [r1]! vld1.8 {q0-q1}, [r2]! + subs r4, r4, #32 veor q0, q0, q4 veor q1, q1, q5 + ble .Lle192 vst1.8 {q0-q1}, [r1]! vld1.8 {q0-q1}, [r2]! + subs r4, r4, #32 veor q0, q0, q9 veor q1, q1, q13 + ble .Lle224 vst1.8 {q0-q1}, [r1]! vld1.8 {q0-q1}, [r2]! + subs r4, r4, #32 veor q0, q0, q3 veor q1, q1, q7 + blt .Llt256 +.Lout: vst1.8 {q0-q1}, [r1]! vld1.8 {q0-q1}, [r2] - mov sp, r4 // restore original stack pointer veor q0, q0, q11 veor q1, q1, q15 vst1.8 {q0-q1}, [r1] - pop {r4-r5} - bx lr + pop {r4, pc} + +.Lle192: + vmov q4, q9 + vmov q5, q13 + +.Lle160: + // nothing to do + +.Lfinalblock: + // Process the final block if processing less than 4 full blocks. + // Entered with 32 bytes of ChaCha cipher stream in q4-q5, and the + // previous 32 byte output block that still needs to be written at + // [r1] in q0-q1. + beq .Lfullblock + +.Lpartialblock: + adr lr, .Lpermute + 32 + add r2, r2, r4 + add lr, lr, r4 + add r4, r4, r1 + + vld1.8 {q2-q3}, [lr] + vld1.8 {q6-q7}, [r2] + + add r4, r4, #32 + + vtbl.8 d4, {q4-q5}, d4 + vtbl.8 d5, {q4-q5}, d5 + vtbl.8 d6, {q4-q5}, d6 + vtbl.8 d7, {q4-q5}, d7 + + veor q6, q6, q2 + veor q7, q7, q3 + + vst1.8 {q6-q7}, [r4] // overlapping stores + vst1.8 {q0-q1}, [r1] + pop {r4, pc} + +.Lfullblock: + vmov q11, q4 + vmov q15, q5 + b .Lout +.Lle96: + vmov q4, q2 + vmov q5, q6 + b .Lfinalblock +.Lle128: + vmov q4, q10 + vmov q5, q14 + b .Lfinalblock +.Lle224: + vmov q4, q3 + vmov q5, q7 + b .Lfinalblock +.Llt256: + vmov q4, q11 + vmov q5, q15 + b .Lpartialblock ENDPROC(chacha_4block_xor_neon) + + .align L1_CACHE_SHIFT +.Lpermute: + .byte 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07 + .byte 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f + .byte 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17 + .byte 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f + .byte 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07 + .byte 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f + .byte 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17 + .byte 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f diff --git a/arch/arm/crypto/sha1-ce-glue.c b/arch/arm/crypto/sha1-ce-glue.c index e79b1fb4b4dc..de9100c67b37 100644 --- a/arch/arm/crypto/sha1-ce-glue.c +++ b/arch/arm/crypto/sha1-ce-glue.c @@ -7,7 +7,7 @@ #include <crypto/internal/hash.h> #include <crypto/internal/simd.h> -#include <crypto/sha.h> +#include <crypto/sha1.h> #include <crypto/sha1_base.h> #include <linux/cpufeature.h> #include <linux/crypto.h> diff --git a/arch/arm/crypto/sha1.h b/arch/arm/crypto/sha1.h index 758db3e9ff0a..b1b7e21da2c3 100644 --- a/arch/arm/crypto/sha1.h +++ b/arch/arm/crypto/sha1.h @@ -3,7 +3,7 @@ #define ASM_ARM_CRYPTO_SHA1_H #include <linux/crypto.h> -#include <crypto/sha.h> +#include <crypto/sha1.h> extern int sha1_update_arm(struct shash_desc *desc, const u8 *data, unsigned int len); diff --git a/arch/arm/crypto/sha1_glue.c b/arch/arm/crypto/sha1_glue.c index 4e954b3f7ecd..6c2b849e459d 100644 --- a/arch/arm/crypto/sha1_glue.c +++ b/arch/arm/crypto/sha1_glue.c @@ -15,7 +15,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/types.h> -#include <crypto/sha.h> +#include <crypto/sha1.h> #include <crypto/sha1_base.h> #include <asm/byteorder.h> diff --git a/arch/arm/crypto/sha1_neon_glue.c b/arch/arm/crypto/sha1_neon_glue.c index 0071e5e4411a..cfe36ae0f3f5 100644 --- a/arch/arm/crypto/sha1_neon_glue.c +++ b/arch/arm/crypto/sha1_neon_glue.c @@ -19,7 +19,7 @@ #include <linux/module.h> #include <linux/mm.h> #include <linux/types.h> -#include <crypto/sha.h> +#include <crypto/sha1.h> #include <crypto/sha1_base.h> #include <asm/neon.h> #include <asm/simd.h> diff --git a/arch/arm/crypto/sha2-ce-glue.c b/arch/arm/crypto/sha2-ce-glue.c index 87f0b62386c6..c62ce89dd3e0 100644 --- a/arch/arm/crypto/sha2-ce-glue.c +++ b/arch/arm/crypto/sha2-ce-glue.c @@ -7,7 +7,7 @@ #include <crypto/internal/hash.h> #include <crypto/internal/simd.h> -#include <crypto/sha.h> +#include <crypto/sha2.h> #include <crypto/sha256_base.h> #include <linux/cpufeature.h> #include <linux/crypto.h> diff --git a/arch/arm/crypto/sha256_glue.c b/arch/arm/crypto/sha256_glue.c index b8a4f79020cf..433ee4ddce6c 100644 --- a/arch/arm/crypto/sha256_glue.c +++ b/arch/arm/crypto/sha256_glue.c @@ -17,7 +17,7 @@ #include <linux/mm.h> #include <linux/types.h> #include <linux/string.h> -#include <crypto/sha.h> +#include <crypto/sha2.h> #include <crypto/sha256_base.h> #include <asm/simd.h> #include <asm/neon.h> diff --git a/arch/arm/crypto/sha256_neon_glue.c b/arch/arm/crypto/sha256_neon_glue.c index 79820b9e2541..701706262ef3 100644 --- a/arch/arm/crypto/sha256_neon_glue.c +++ b/arch/arm/crypto/sha256_neon_glue.c @@ -13,7 +13,7 @@ #include <crypto/internal/simd.h> #include <linux/types.h> #include <linux/string.h> -#include <crypto/sha.h> +#include <crypto/sha2.h> #include <crypto/sha256_base.h> #include <asm/byteorder.h> #include <asm/simd.h> diff --git a/arch/arm/crypto/sha512-glue.c b/arch/arm/crypto/sha512-glue.c index 8775aa42bbbe..0635a65aa488 100644 --- a/arch/arm/crypto/sha512-glue.c +++ b/arch/arm/crypto/sha512-glue.c @@ -6,7 +6,7 @@ */ #include <crypto/internal/hash.h> -#include <crypto/sha.h> +#include <crypto/sha2.h> #include <crypto/sha512_base.h> #include <linux/crypto.h> #include <linux/module.h> diff --git a/arch/arm/crypto/sha512-neon-glue.c b/arch/arm/crypto/sha512-neon-glue.c index 96cb94403540..c879ad32db51 100644 --- a/arch/arm/crypto/sha512-neon-glue.c +++ b/arch/arm/crypto/sha512-neon-glue.c @@ -7,7 +7,7 @@ #include <crypto/internal/hash.h> #include <crypto/internal/simd.h> -#include <crypto/sha.h> +#include <crypto/sha2.h> #include <crypto/sha512_base.h> #include <linux/crypto.h> #include <linux/module.h> diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 383635b68763..4a0848aef207 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -4,7 +4,6 @@ generic-y += extable.h generic-y += flat.h generic-y += local64.h generic-y += parport.h -generic-y += seccomp.h generated-y += mach-types.h generated-y += unistd-nr.h diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index 0ac62a54b73c..b8102a6ddf16 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -116,10 +116,6 @@ extern int elf_check_arch(const struct elf32_hdr *); extern int arm_elf_read_implies_exec(int); #define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(stk) -struct task_struct; -int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); -#define ELF_CORE_COPY_TASK_REGS dump_task_regs - #define CORE_DUMP_USE_REGSET #define ELF_EXEC_PAGESIZE 4096 diff --git a/arch/arm/include/asm/fixmap.h b/arch/arm/include/asm/fixmap.h index 9575b404019c..707068f852c2 100644 --- a/arch/arm/include/asm/fixmap.h +++ b/arch/arm/include/asm/fixmap.h @@ -7,14 +7,14 @@ #define FIXADDR_TOP (FIXADDR_END - PAGE_SIZE) #include <linux/pgtable.h> -#include <asm/kmap_types.h> +#include <asm/kmap_size.h> enum fixed_addresses { FIX_EARLYCON_MEM_BASE, __end_of_permanent_fixed_addresses, FIX_KMAP_BEGIN = __end_of_permanent_fixed_addresses, - FIX_KMAP_END = FIX_KMAP_BEGIN + (KM_TYPE_NR * NR_CPUS) - 1, + FIX_KMAP_END = FIX_KMAP_BEGIN + (KM_MAX_IDX * NR_CPUS) - 1, /* Support writing RO kernel text via kprobes, jump labels, etc. */ FIX_TEXT_POKE0, diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h index b95848ed2bc7..706efafbf972 100644 --- a/arch/arm/include/asm/hardirq.h +++ b/arch/arm/include/asm/hardirq.h @@ -2,16 +2,11 @@ #ifndef __ASM_HARDIRQ_H #define __ASM_HARDIRQ_H -#include <linux/cache.h> -#include <linux/threads.h> #include <asm/irq.h> -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ - #define __ARCH_IRQ_EXIT_IRQS_DISABLED 1 +#define ack_bad_irq ack_bad_irq + +#include <asm-generic/hardirq.h> #endif /* __ASM_HARDIRQ_H */ diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h index 31811be38d78..b4b66220952d 100644 --- a/arch/arm/include/asm/highmem.h +++ b/arch/arm/include/asm/highmem.h @@ -2,7 +2,8 @@ #ifndef _ASM_HIGHMEM_H #define _ASM_HIGHMEM_H -#include <asm/kmap_types.h> +#include <asm/cachetype.h> +#include <asm/fixmap.h> #define PKMAP_BASE (PAGE_OFFSET - PMD_SIZE) #define LAST_PKMAP PTRS_PER_PTE @@ -46,19 +47,32 @@ extern pte_t *pkmap_page_table; #ifdef ARCH_NEEDS_KMAP_HIGH_GET extern void *kmap_high_get(struct page *page); -#else + +static inline void *arch_kmap_local_high_get(struct page *page) +{ + if (IS_ENABLED(CONFIG_DEBUG_HIGHMEM) && !cache_is_vivt()) + return NULL; + return kmap_high_get(page); +} +#define arch_kmap_local_high_get arch_kmap_local_high_get + +#else /* ARCH_NEEDS_KMAP_HIGH_GET */ static inline void *kmap_high_get(struct page *page) { return NULL; } -#endif +#endif /* !ARCH_NEEDS_KMAP_HIGH_GET */ -/* - * The following functions are already defined by <linux/highmem.h> - * when CONFIG_HIGHMEM is not set. - */ -#ifdef CONFIG_HIGHMEM -extern void *kmap_atomic_pfn(unsigned long pfn); -#endif +#define arch_kmap_local_post_map(vaddr, pteval) \ + local_flush_tlb_kernel_page(vaddr) + +#define arch_kmap_local_pre_unmap(vaddr) \ +do { \ + if (cache_is_vivt()) \ + __cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE); \ +} while (0) + +#define arch_kmap_local_post_unmap(vaddr) \ + local_flush_tlb_kernel_page(vaddr) #endif diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index ab2b654084fa..fc748122f1e0 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -441,7 +441,6 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); #define ARCH_HAS_VALID_PHYS_ADDR_RANGE extern int valid_phys_addr_range(phys_addr_t addr, size_t size); extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); -extern int devmem_is_allowed(unsigned long pfn); #endif /* diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h index 46d41140df27..1cbcc462b07e 100644 --- a/arch/arm/include/asm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -31,6 +31,8 @@ void handle_IRQ(unsigned int, struct pt_regs *); void init_IRQ(void); #ifdef CONFIG_SMP +#include <linux/cpumask.h> + extern void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self); #define arch_trigger_cpumask_backtrace arch_trigger_cpumask_backtrace diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h deleted file mode 100644 index 5590940ee43d..000000000000 --- a/arch/arm/include/asm/kmap_types.h +++ /dev/null @@ -1,10 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ARM_KMAP_TYPES_H -#define __ARM_KMAP_TYPES_H - -/* - * This is the "bare minimum". AIO seems to require this. - */ -#define KM_TYPE_NR 16 - -#endif diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h index d75d39280db7..5f522916ec99 100644 --- a/arch/arm/include/asm/mach/time.h +++ b/arch/arm/include/asm/mach/time.h @@ -7,8 +7,6 @@ #ifndef __ASM_ARM_MACH_TIME_H #define __ASM_ARM_MACH_TIME_H -extern void timer_tick(void); - typedef void (*clock_access_fn)(struct timespec64 *); extern int register_persistent_clock(clock_access_fn read_persistent); diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index f99ed524fe41..84e58956fcab 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -26,6 +26,8 @@ void __check_vmalloc_seq(struct mm_struct *mm); #ifdef CONFIG_CPU_HAS_ASID void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk); + +#define init_new_context init_new_context static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm) { @@ -92,33 +94,11 @@ static inline void finish_arch_post_lock_switch(void) #endif /* CONFIG_MMU */ -static inline int -init_new_context(struct task_struct *tsk, struct mm_struct *mm) -{ - return 0; -} - - #endif /* CONFIG_CPU_HAS_ASID */ -#define destroy_context(mm) do { } while(0) #define activate_mm(prev,next) switch_mm(prev, next, NULL) /* - * This is called when "tsk" is about to enter lazy TLB mode. - * - * mm: describes the currently active mm context - * tsk: task which is entering lazy tlb - * cpu: cpu number which is entering lazy tlb - * - * tsk->mm will be NULL - */ -static inline void -enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - -/* * This is the actual mm switch as far as the scheduler * is concerned. No registers are touched. We avoid * calling the CPU specific function when the mm hasn't @@ -149,6 +129,6 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next, #endif } -#define deactivate_mm(tsk,mm) do { } while (0) +#include <asm-generic/mmu_context.h> #endif diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h index 9d4f5eef410b..70fe69bdcce2 100644 --- a/arch/arm/include/asm/pgtable-2level.h +++ b/arch/arm/include/asm/pgtable-2level.h @@ -75,6 +75,8 @@ #define PTE_HWTABLE_OFF (PTE_HWTABLE_PTRS * sizeof(pte_t)) #define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u32)) +#define MAX_POSSIBLE_PHYSMEM_BITS 32 + /* * PMD_SHIFT determines the size of the area a second-level page table can map * PGDIR_SHIFT determines what a third-level page table entry can map diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index fbb6693c3352..2b85d175e999 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -25,6 +25,8 @@ #define PTE_HWTABLE_OFF (0) #define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u64)) +#define MAX_POSSIBLE_PHYSMEM_BITS 40 + /* * PGDIR_SHIFT determines the size a top-level page table entry can map. */ diff --git a/arch/arm/include/asm/seccomp.h b/arch/arm/include/asm/seccomp.h new file mode 100644 index 000000000000..e9ad0f37d2ba --- /dev/null +++ b/arch/arm/include/asm/seccomp.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef _ASM_SECCOMP_H +#define _ASM_SECCOMP_H + +#include <asm-generic/seccomp.h> + +#define SECCOMP_ARCH_NATIVE AUDIT_ARCH_ARM +#define SECCOMP_ARCH_NATIVE_NR NR_syscalls +#define SECCOMP_ARCH_NATIVE_NAME "arm" + +#endif /* _ASM_SECCOMP_H */ diff --git a/arch/arm/include/asm/signal.h b/arch/arm/include/asm/signal.h index 65530a042009..430be7774402 100644 --- a/arch/arm/include/asm/signal.h +++ b/arch/arm/include/asm/signal.h @@ -17,6 +17,8 @@ typedef struct { unsigned long sig[_NSIG_WORDS]; } sigset_t; +#define __ARCH_UAPI_SA_FLAGS (SA_THIRTYTWO | SA_RESTORER) + #define __ARCH_HAS_SA_RESTORER #include <asm/sigcontext.h> diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 56fae7861fd3..70d4cbc49ae1 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -134,6 +134,8 @@ extern int vfp_restore_user_hwstate(struct user_vfp *, * thread information flags: * TIF_USEDFPU - FPU was used by this task this quantum (SMP) * TIF_POLLING_NRFLAG - true if poll_idle() is polling TIF_NEED_RESCHED + * + * Any bit in the range of 0..15 will cause do_work_pending() to be invoked. */ #define TIF_SIGPENDING 0 /* signal pending */ #define TIF_NEED_RESCHED 1 /* rescheduling necessary */ @@ -143,6 +145,7 @@ extern int vfp_restore_user_hwstate(struct user_vfp *, #define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */ #define TIF_SYSCALL_TRACEPOINT 6 /* syscall tracepoint instrumentation */ #define TIF_SECCOMP 7 /* seccomp syscall filtering active */ +#define TIF_NOTIFY_SIGNAL 8 /* signal notifications exist */ #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ @@ -156,6 +159,7 @@ extern int vfp_restore_user_hwstate(struct user_vfp *, #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_NOTIFY_SIGNAL (1 << TIF_NOTIFY_SIGNAL) #define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) /* Checks for any syscall work in entry-common.S */ @@ -166,7 +170,8 @@ extern int vfp_restore_user_hwstate(struct user_vfp *, * Change these and you break ASM code in entry-common.S */ #define _TIF_WORK_MASK (_TIF_NEED_RESCHED | _TIF_SIGPENDING | \ - _TIF_NOTIFY_RESUME | _TIF_UPROBE) + _TIF_NOTIFY_RESUME | _TIF_UPROBE | \ + _TIF_NOTIFY_SIGNAL) #endif /* __KERNEL__ */ #endif /* __ASM_ARM_THREAD_INFO_H */ diff --git a/arch/arm/include/uapi/asm/signal.h b/arch/arm/include/uapi/asm/signal.h index 9b4185ba4f8a..c9a3ea1d8d41 100644 --- a/arch/arm/include/uapi/asm/signal.h +++ b/arch/arm/include/uapi/asm/signal.h @@ -60,33 +60,12 @@ typedef unsigned long sigset_t; #define SIGSWI 32 /* - * SA_FLAGS values: - * - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_SIGINFO deliver the signal with SIGINFO structs - * SA_THIRTYTWO delivers the signal in 32-bit mode, even if the task - * is running in 26-bit. - * SA_ONSTACK allows alternate signal stacks (see sigaltstack(2)). - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NODEFER prevents the current signal from being masked in the handler. - * SA_RESETHAND clears the handler when the signal is delivered. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. + * SA_THIRTYTWO historically meant deliver the signal in 32-bit mode, even if + * the task is running in 26-bit. But since the kernel no longer supports + * 26-bit mode, the flag has no effect. */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 #define SA_THIRTYTWO 0x02000000 #define SA_RESTORER 0x04000000 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND #define MINSIGSTKSZ 2048 #define SIGSTKSZ 8192 diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index c38c8b019d24..ae295a3bcfef 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -17,7 +17,7 @@ CFLAGS_REMOVE_return_address.o = -pg # Object file lists. obj-y := elf.o entry-common.o irq.o opcodes.o \ - process.o ptrace.o reboot.o \ + process.o ptrace.o reboot.o io.o \ setup.o signal.o sigreturn_codes.o \ stacktrace.o sys_arm.o time.o traps.o @@ -86,10 +86,6 @@ AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o obj-$(CONFIG_VDSO) += vdso.o obj-$(CONFIG_EFI) += efi.o - -ifneq ($(CONFIG_ARCH_EBSA110),y) - obj-y += io.o -endif obj-$(CONFIG_PARAVIRT) += paravirt.o head-y := head$(MMUEXT).o diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index fee279e28a72..e0d7833a1827 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -54,7 +54,7 @@ __ret_fast_syscall: cmp r2, r1 blne addr_limit_check_failed ldr r1, [tsk, #TI_FLAGS] @ re-check for syscall tracing - tst r1, #_TIF_SYSCALL_WORK | _TIF_WORK_MASK + movs r1, r1, lsl #16 bne fast_work_pending @@ -92,7 +92,7 @@ __ret_fast_syscall: cmp r2, r1 blne addr_limit_check_failed ldr r1, [tsk, #TI_FLAGS] @ re-check for syscall tracing - tst r1, #_TIF_SYSCALL_WORK | _TIF_WORK_MASK + movs r1, r1, lsl #16 beq no_work_pending UNWIND(.fnend ) ENDPROC(ret_fast_syscall) @@ -134,7 +134,7 @@ ENTRY(ret_to_user_from_irq) cmp r2, r1 blne addr_limit_check_failed ldr r1, [tsk, #TI_FLAGS] - tst r1, #_TIF_WORK_MASK + movs r1, r1, lsl #16 bne slow_work_pending no_work_pending: asm_trace_hardirqs_on save = 0 diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S index de1f20624be1..d0e898608d30 100644 --- a/arch/arm/kernel/entry-v7m.S +++ b/arch/arm/kernel/entry-v7m.S @@ -59,7 +59,7 @@ __irq_entry: get_thread_info tsk ldr r2, [tsk, #TI_FLAGS] - tst r2, #_TIF_WORK_MASK + movs r2, r2, lsl #16 beq 2f @ no work pending mov r0, #V7M_SCB_ICSR_PENDSVSET str r0, [r1, V7M_SCB_ICSR] @ raise PendSV diff --git a/arch/arm/kernel/perf_regs.c b/arch/arm/kernel/perf_regs.c index 05fe92aa7d98..0529f90395c9 100644 --- a/arch/arm/kernel/perf_regs.c +++ b/arch/arm/kernel/perf_regs.c @@ -32,8 +32,7 @@ u64 perf_reg_abi(struct task_struct *task) } void perf_get_regs_user(struct perf_regs *regs_user, - struct pt_regs *regs, - struct pt_regs *regs_user_copy) + struct pt_regs *regs) { regs_user->regs = task_pt_regs(current); regs_user->abi = perf_reg_abi(current); diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 8e6ace03e960..ee3aee69e444 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -71,7 +71,7 @@ void arch_cpu_idle(void) arm_pm_idle(); else cpu_do_idle(); - local_irq_enable(); + raw_local_irq_enable(); } void arch_cpu_idle_prepare(void) @@ -272,15 +272,6 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start, return 0; } -/* - * Fill in the task's elfregs structure for a core dump. - */ -int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs) -{ - elf_core_copy_regs(elfregs, task_pt_regs(t)); - return 1; -} - unsigned long get_wchan(struct task_struct *p) { struct stackframe frame; diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 585edbfccf6d..9d2e916121be 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -655,7 +655,7 @@ do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall) if (unlikely(!user_mode(regs))) return 0; local_irq_enable(); - if (thread_flags & _TIF_SIGPENDING) { + if (thread_flags & (_TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL)) { int restart = do_signal(regs, syscall); if (unlikely(restart)) { /* diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 09b149b09c43..b3836c94dc74 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -60,20 +60,6 @@ unsigned long profile_pc(struct pt_regs *regs) EXPORT_SYMBOL(profile_pc); #endif -#ifndef CONFIG_GENERIC_CLOCKEVENTS -/* - * Kernel system timer support. - */ -void timer_tick(void) -{ - profile_tick(CPU_PROFILING); - xtime_update(1); -#ifndef CONFIG_SMP - update_process_times(user_mode(get_irq_regs())); -#endif -} -#endif - static void dummy_clock_access(struct timespec64 *ts) { ts->tv_sec = 0; diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c index fddd08a6e063..3408269d19c7 100644 --- a/arch/arm/kernel/vdso.c +++ b/arch/arm/kernel/vdso.c @@ -50,15 +50,6 @@ static const struct vm_special_mapping vdso_data_mapping = { static int vdso_mremap(const struct vm_special_mapping *sm, struct vm_area_struct *new_vma) { - unsigned long new_size = new_vma->vm_end - new_vma->vm_start; - unsigned long vdso_size; - - /* without VVAR page */ - vdso_size = (vdso_total_pages - 1) << PAGE_SHIFT; - - if (vdso_size != new_size) - return -EINVAL; - current->mm->context.vdso = new_vma->vm_start; return 0; diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 5f4922e858d0..f7f4620d59c3 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -41,6 +41,10 @@ SECTIONS #ifndef CONFIG_SMP_ON_UP *(.alt.smp.init) #endif +#ifndef CONFIG_ARM_UNWIND + *(.ARM.exidx) *(.ARM.exidx.*) + *(.ARM.extab) *(.ARM.extab.*) +#endif } . = PAGE_OFFSET + TEXT_OFFSET; diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index ae790908fc74..9b594ae98153 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -211,7 +211,6 @@ config ARCH_BRCMSTB select BCM7038_L1_IRQ select BRCMSTB_L2_IRQ select BCM7120_L2_IRQ - select ARCH_HAS_HOLES_MEMORYMODEL select ZONE_DMA if ARM_LPAE select SOC_BRCMSTB select SOC_BUS diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index f56ff8c24043..de11030748d0 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -5,7 +5,6 @@ menuconfig ARCH_DAVINCI depends on ARCH_MULTI_V5 select DAVINCI_TIMER select ZONE_DMA - select ARCH_HAS_HOLES_MEMORYMODEL select PM_GENERIC_DOMAINS if PM select PM_GENERIC_DOMAINS_OF if PM && OF select REGMAP_MMIO diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile deleted file mode 100644 index 296541315d25..000000000000 --- a/arch/arm/mach-ebsa110/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y := core.o io.o leds.o diff --git a/arch/arm/mach-ebsa110/Makefile.boot b/arch/arm/mach-ebsa110/Makefile.boot deleted file mode 100644 index e7e98937c71b..000000000000 --- a/arch/arm/mach-ebsa110/Makefile.boot +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - zreladdr-y += 0x00008000 -params_phys-y := 0x00000400 -initrd_phys-y := 0x00800000 - diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c deleted file mode 100644 index 5960e3dfd2bf..000000000000 --- a/arch/arm/mach-ebsa110/core.c +++ /dev/null @@ -1,323 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-ebsa110/core.c - * - * Copyright (C) 1998-2001 Russell King - * - * Extra MM routines for the EBSA-110 architecture - */ -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/serial_8250.h> -#include <linux/init.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/page.h> -#include <asm/system_misc.h> - -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <asm/mach/map.h> - -#include <asm/mach/time.h> - -#include "core.h" - -static void ebsa110_mask_irq(struct irq_data *d) -{ - __raw_writeb(1 << d->irq, IRQ_MCLR); -} - -static void ebsa110_unmask_irq(struct irq_data *d) -{ - __raw_writeb(1 << d->irq, IRQ_MSET); -} - -static struct irq_chip ebsa110_irq_chip = { - .irq_ack = ebsa110_mask_irq, - .irq_mask = ebsa110_mask_irq, - .irq_unmask = ebsa110_unmask_irq, -}; - -static void __init ebsa110_init_irq(void) -{ - unsigned long flags; - unsigned int irq; - - local_irq_save(flags); - __raw_writeb(0xff, IRQ_MCLR); - __raw_writeb(0x55, IRQ_MSET); - __raw_writeb(0x00, IRQ_MSET); - if (__raw_readb(IRQ_MASK) != 0x55) - while (1); - __raw_writeb(0xff, IRQ_MCLR); /* clear all interrupt enables */ - local_irq_restore(flags); - - for (irq = 0; irq < NR_IRQS; irq++) { - irq_set_chip_and_handler(irq, &ebsa110_irq_chip, - handle_level_irq); - irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); - } -} - -static struct map_desc ebsa110_io_desc[] __initdata = { - /* - * sparse external-decode ISAIO space - */ - { /* IRQ_STAT/IRQ_MCLR */ - .virtual = (unsigned long)IRQ_STAT, - .pfn = __phys_to_pfn(TRICK4_PHYS), - .length = TRICK4_SIZE, - .type = MT_DEVICE - }, { /* IRQ_MASK/IRQ_MSET */ - .virtual = (unsigned long)IRQ_MASK, - .pfn = __phys_to_pfn(TRICK3_PHYS), - .length = TRICK3_SIZE, - .type = MT_DEVICE - }, { /* SOFT_BASE */ - .virtual = (unsigned long)SOFT_BASE, - .pfn = __phys_to_pfn(TRICK1_PHYS), - .length = TRICK1_SIZE, - .type = MT_DEVICE - }, { /* PIT_BASE */ - .virtual = (unsigned long)PIT_BASE, - .pfn = __phys_to_pfn(TRICK0_PHYS), - .length = TRICK0_SIZE, - .type = MT_DEVICE - }, - - /* - * self-decode ISAIO space - */ - { - .virtual = ISAIO_BASE, - .pfn = __phys_to_pfn(ISAIO_PHYS), - .length = ISAIO_SIZE, - .type = MT_DEVICE - }, { - .virtual = ISAMEM_BASE, - .pfn = __phys_to_pfn(ISAMEM_PHYS), - .length = ISAMEM_SIZE, - .type = MT_DEVICE - } -}; - -static void __init ebsa110_map_io(void) -{ - iotable_init(ebsa110_io_desc, ARRAY_SIZE(ebsa110_io_desc)); -} - -static void __iomem *ebsa110_ioremap_caller(phys_addr_t cookie, size_t size, - unsigned int flags, void *caller) -{ - return (void __iomem *)cookie; -} - -static void ebsa110_iounmap(volatile void __iomem *io_addr) -{} - -static void __init ebsa110_init_early(void) -{ - arch_ioremap_caller = ebsa110_ioremap_caller; - arch_iounmap = ebsa110_iounmap; -} - -#define PIT_CTRL (PIT_BASE + 0x0d) -#define PIT_T2 (PIT_BASE + 0x09) -#define PIT_T1 (PIT_BASE + 0x05) -#define PIT_T0 (PIT_BASE + 0x01) - -/* - * This is the rate at which your MCLK signal toggles (in Hz) - * This was measured on a 10 digit frequency counter sampling - * over 1 second. - */ -#define MCLK 47894000 - -/* - * This is the rate at which the PIT timers get clocked - */ -#define CLKBY7 (MCLK / 7) - -/* - * This is the counter value. We tick at 200Hz on this platform. - */ -#define COUNT ((CLKBY7 + (HZ / 2)) / HZ) - -/* - * Get the time offset from the system PIT. Note that if we have missed an - * interrupt, then the PIT counter will roll over (ie, be negative). - * This actually works out to be convenient. - */ -static u32 ebsa110_gettimeoffset(void) -{ - unsigned long offset, count; - - __raw_writeb(0x40, PIT_CTRL); - count = __raw_readb(PIT_T1); - count |= __raw_readb(PIT_T1) << 8; - - /* - * If count > COUNT, make the number negative. - */ - if (count > COUNT) - count |= 0xffff0000; - - offset = COUNT; - offset -= count; - - /* - * `offset' is in units of timer counts. Convert - * offset to units of microseconds. - */ - offset = offset * (1000000 / HZ) / COUNT; - - return offset * 1000; -} - -static irqreturn_t -ebsa110_timer_interrupt(int irq, void *dev_id) -{ - u32 count; - - /* latch and read timer 1 */ - __raw_writeb(0x40, PIT_CTRL); - count = __raw_readb(PIT_T1); - count |= __raw_readb(PIT_T1) << 8; - - count += COUNT; - - __raw_writeb(count & 0xff, PIT_T1); - __raw_writeb(count >> 8, PIT_T1); - - timer_tick(); - - return IRQ_HANDLED; -} - -/* - * Set up timer interrupt. - */ -void __init ebsa110_timer_init(void) -{ - int irq = IRQ_EBSA110_TIMER0; - - arch_gettimeoffset = ebsa110_gettimeoffset; - - /* - * Timer 1, mode 2, LSB/MSB - */ - __raw_writeb(0x70, PIT_CTRL); - __raw_writeb(COUNT & 0xff, PIT_T1); - __raw_writeb(COUNT >> 8, PIT_T1); - - if (request_irq(irq, ebsa110_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL, - "EBSA110 Timer Tick", NULL)) - pr_err("Failed to request irq %d (EBSA110 Timer Tick)\n", irq); -} - -static struct plat_serial8250_port serial_platform_data[] = { - { - .iobase = 0x3f8, - .irq = 1, - .uartclk = 1843200, - .regshift = 0, - .iotype = UPIO_PORT, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { - .iobase = 0x2f8, - .irq = 2, - .uartclk = 1843200, - .regshift = 0, - .iotype = UPIO_PORT, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, -}; - -static struct resource am79c961_resources[] = { - { - .start = 0x220, - .end = 0x238, - .flags = IORESOURCE_IO, - }, { - .start = IRQ_EBSA110_ETHERNET, - .end = IRQ_EBSA110_ETHERNET, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device am79c961_device = { - .name = "am79c961", - .id = -1, - .num_resources = ARRAY_SIZE(am79c961_resources), - .resource = am79c961_resources, -}; - -static struct platform_device *ebsa110_devices[] = { - &serial_device, - &am79c961_device, -}; - -/* - * EBSA110 idling methodology: - * - * We can not execute the "wait for interrupt" instruction since that - * will stop our MCLK signal (which provides the clock for the glue - * logic, and therefore the timer interrupt). - * - * Instead, we spin, polling the IRQ_STAT register for the occurrence - * of any interrupt with core clock down to the memory clock. - */ -static void ebsa110_idle(void) -{ - const char *irq_stat = (char *)0xff000000; - - /* disable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc"); - - /* wait for an interrupt to occur */ - while (!*irq_stat); - - /* enable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc"); -} - -static int __init ebsa110_init(void) -{ - arm_pm_idle = ebsa110_idle; - return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices)); -} - -arch_initcall(ebsa110_init); - -static void ebsa110_restart(enum reboot_mode mode, const char *cmd) -{ - soft_restart(0x80000000); -} - -MACHINE_START(EBSA110, "EBSA110") - /* Maintainer: Russell King */ - .atag_offset = 0x400, - .reserve_lp0 = 1, - .reserve_lp2 = 1, - .map_io = ebsa110_map_io, - .init_early = ebsa110_init_early, - .init_irq = ebsa110_init_irq, - .init_time = ebsa110_timer_init, - .restart = ebsa110_restart, -MACHINE_END diff --git a/arch/arm/mach-ebsa110/core.h b/arch/arm/mach-ebsa110/core.h deleted file mode 100644 index 47acc610b6b4..000000000000 --- a/arch/arm/mach-ebsa110/core.h +++ /dev/null @@ -1,38 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 1996-2000 Russell King. - * - * This file contains the core hardware definitions of the EBSA-110. - */ -#ifndef CORE_H -#define CORE_H - -/* Physical addresses/sizes */ -#define ISAMEM_PHYS 0xe0000000 -#define ISAMEM_SIZE 0x10000000 - -#define ISAIO_PHYS 0xf0000000 -#define ISAIO_SIZE PGDIR_SIZE - -#define TRICK0_PHYS 0xf2000000 -#define TRICK0_SIZE PGDIR_SIZE -#define TRICK1_PHYS 0xf2400000 -#define TRICK1_SIZE PGDIR_SIZE -#define TRICK2_PHYS 0xf2800000 -#define TRICK3_PHYS 0xf2c00000 -#define TRICK3_SIZE PGDIR_SIZE -#define TRICK4_PHYS 0xf3000000 -#define TRICK4_SIZE PGDIR_SIZE -#define TRICK5_PHYS 0xf3400000 -#define TRICK6_PHYS 0xf3800000 -#define TRICK7_PHYS 0xf3c00000 - -/* Virtual addresses */ -#define PIT_BASE IOMEM(0xfc000000) /* trick 0 */ -#define SOFT_BASE IOMEM(0xfd000000) /* trick 1 */ -#define IRQ_MASK IOMEM(0xfe000000) /* trick 3 - read */ -#define IRQ_MSET IOMEM(0xfe000000) /* trick 3 - write */ -#define IRQ_STAT IOMEM(0xff000000) /* trick 4 - read */ -#define IRQ_MCLR IOMEM(0xff000000) /* trick 4 - write */ - -#endif diff --git a/arch/arm/mach-ebsa110/include/mach/entry-macro.S b/arch/arm/mach-ebsa110/include/mach/entry-macro.S deleted file mode 100644 index 14b110de78a9..000000000000 --- a/arch/arm/mach-ebsa110/include/mach/entry-macro.S +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-ebsa110/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for ebsa110 platform. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - - -#define IRQ_STAT 0xff000000 /* read */ - - .macro get_irqnr_preamble, base, tmp - mov \base, #IRQ_STAT - .endm - - .macro get_irqnr_and_base, irqnr, stat, base, tmp - ldrb \stat, [\base] @ get interrupts - mov \irqnr, #0 - tst \stat, #15 - addeq \irqnr, \irqnr, #4 - moveq \stat, \stat, lsr #4 - tst \stat, #3 - addeq \irqnr, \irqnr, #2 - moveq \stat, \stat, lsr #2 - tst \stat, #1 - addeq \irqnr, \irqnr, #1 - moveq \stat, \stat, lsr #1 - tst \stat, #1 @ bit 0 should be set - .endm - diff --git a/arch/arm/mach-ebsa110/include/mach/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h deleted file mode 100644 index 81f6967683f6..000000000000 --- a/arch/arm/mach-ebsa110/include/mach/hardware.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ebsa110/include/mach/hardware.h - * - * Copyright (C) 1996-2000 Russell King. - * - * This file contains the hardware definitions of the EBSA-110. - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#define ISAMEM_BASE 0xe0000000 -#define ISAIO_BASE 0xf0000000 - -/* - * RAM definitions - */ -#define UNCACHEABLE_ADDR 0xff000000 /* IRQ_STAT */ - -#endif - diff --git a/arch/arm/mach-ebsa110/include/mach/io.h b/arch/arm/mach-ebsa110/include/mach/io.h deleted file mode 100644 index ad170886c9aa..000000000000 --- a/arch/arm/mach-ebsa110/include/mach/io.h +++ /dev/null @@ -1,89 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ebsa110/include/mach/io.h - * - * Copyright (C) 1997,1998 Russell King - * - * Modifications: - * 06-Dec-1997 RMK Created. - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -u8 __inb8(unsigned int port); -void __outb8(u8 val, unsigned int port); - -u8 __inb16(unsigned int port); -void __outb16(u8 val, unsigned int port); - -u16 __inw(unsigned int port); -void __outw(u16 val, unsigned int port); - -u32 __inl(unsigned int port); -void __outl(u32 val, unsigned int port); - -u8 __readb(const volatile void __iomem *addr); -u16 __readw(const volatile void __iomem *addr); -u32 __readl(const volatile void __iomem *addr); - -void __writeb(u8 val, volatile void __iomem *addr); -void __writew(u16 val, volatile void __iomem *addr); -void __writel(u32 val, volatile void __iomem *addr); - -/* - * Argh, someone forgot the IOCS16 line. We therefore have to handle - * the byte stearing by selecting the correct byte IO functions here. - */ -#ifdef ISA_SIXTEEN_BIT_PERIPHERAL -#define inb(p) __inb16(p) -#define outb(v,p) __outb16(v,p) -#else -#define inb(p) __inb8(p) -#define outb(v,p) __outb8(v,p) -#endif - -#define inw(p) __inw(p) -#define outw(v,p) __outw(v,p) - -#define inl(p) __inl(p) -#define outl(v,p) __outl(v,p) - -#define readb(b) __readb(b) -#define readw(b) __readw(b) -#define readl(b) __readl(b) -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) - -#define writeb(v,b) __writeb(v,b) -#define writew(v,b) __writew(v,b) -#define writel(v,b) __writel(v,b) - -#define insb insb -extern void insb(unsigned int port, void *buf, int sz); -#define insw insw -extern void insw(unsigned int port, void *buf, int sz); -#define insl insl -extern void insl(unsigned int port, void *buf, int sz); - -#define outsb outsb -extern void outsb(unsigned int port, const void *buf, int sz); -#define outsw outsw -extern void outsw(unsigned int port, const void *buf, int sz); -#define outsl outsl -extern void outsl(unsigned int port, const void *buf, int sz); - -/* can't support writesb atm */ -#define writesw writesw -extern void writesw(volatile void __iomem *addr, const void *data, int wordlen); -#define writesl writesl -extern void writesl(volatile void __iomem *addr, const void *data, int longlen); - -/* can't support readsb atm */ -#define readsw readsw -extern void readsw(const volatile void __iomem *addr, void *data, int wordlen); - -#define readsl readsl -extern void readsl(const volatile void __iomem *addr, void *data, int longlen); - -#endif diff --git a/arch/arm/mach-ebsa110/include/mach/irqs.h b/arch/arm/mach-ebsa110/include/mach/irqs.h deleted file mode 100644 index 29a8671fe849..000000000000 --- a/arch/arm/mach-ebsa110/include/mach/irqs.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ebsa110/include/mach/irqs.h - * - * Copyright (C) 1996 Russell King - */ - -#define NR_IRQS 8 - -#define IRQ_EBSA110_PRINTER 0 -#define IRQ_EBSA110_COM1 1 -#define IRQ_EBSA110_COM2 2 -#define IRQ_EBSA110_ETHERNET 3 -#define IRQ_EBSA110_TIMER0 4 -#define IRQ_EBSA110_TIMER1 5 -#define IRQ_EBSA110_PCMCIA 6 -#define IRQ_EBSA110_IMMEDIATE 7 diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h deleted file mode 100644 index f025f405de50..000000000000 --- a/arch/arm/mach-ebsa110/include/mach/memory.h +++ /dev/null @@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ebsa110/include/mach/memory.h - * - * Copyright (C) 1996-1999 Russell King. - * - * Changelog: - * 20-Oct-1996 RMK Created - * 31-Dec-1997 RMK Fixed definitions to reduce warnings - * 21-Mar-1999 RMK Renamed to memory.h - * RMK Moved TASK_SIZE and PAGE_OFFSET here - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Cache flushing area - SRAM - */ -#define FLUSH_BASE_PHYS 0x40000000 -#define FLUSH_BASE 0xdf000000 - -#endif diff --git a/arch/arm/mach-ebsa110/include/mach/uncompress.h b/arch/arm/mach-ebsa110/include/mach/uncompress.h deleted file mode 100644 index 3ec12efe98a6..000000000000 --- a/arch/arm/mach-ebsa110/include/mach/uncompress.h +++ /dev/null @@ -1,41 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ebsa110/include/mach/uncompress.h - * - * Copyright (C) 1996,1997,1998 Russell King - */ - -#include <linux/serial_reg.h> - -#define SERIAL_BASE ((unsigned char *)0xf0000be0) - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - unsigned char v, *base = SERIAL_BASE; - - do { - v = base[UART_LSR << 2]; - barrier(); - } while (!(v & UART_LSR_THRE)); - - base[UART_TX << 2] = c; -} - -static inline void flush(void) -{ - unsigned char v, *base = SERIAL_BASE; - - do { - v = base[UART_LSR << 2]; - barrier(); - } while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) != - (UART_LSR_TEMT|UART_LSR_THRE)); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c deleted file mode 100644 index 3c44dd3596ea..000000000000 --- a/arch/arm/mach-ebsa110/io.c +++ /dev/null @@ -1,440 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * linux/arch/arm/mach-ebsa110/isamem.c - * - * Copyright (C) 2001 Russell King - * - * Perform "ISA" memory and IO accesses. The EBSA110 has some "peculiarities" - * in the way it handles accesses to odd IO ports on 16-bit devices. These - * devices have their D0-D15 lines connected to the processors D0-D15 lines. - * Since they expect all byte IO operations to be performed on D0-D7, and the - * StrongARM expects to transfer the byte to these odd addresses on D8-D15, - * we must use a trick to get the required behaviour. - * - * The trick employed here is to use long word stores to odd address -1. The - * glue logic picks this up as a "trick" access, and asserts the LSB of the - * peripherals address bus, thereby accessing the odd IO port. Meanwhile, the - * StrongARM transfers its data on D0-D7 as expected. - * - * Things get more interesting on the pass-1 EBSA110 - the PCMCIA controller - * wiring was screwed in such a way that it had limited memory space access. - * Luckily, the work-around for this is not too horrible. See - * __isamem_convert_addr for the details. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/page.h> - -static void __iomem *__isamem_convert_addr(const volatile void __iomem *addr) -{ - u32 ret, a = (u32 __force) addr; - - /* - * The PCMCIA controller is wired up as follows: - * +---------+---------+---------+---------+---------+---------+ - * PCMCIA | 2 2 2 2 | 1 1 1 1 | 1 1 1 1 | 1 1 | | | - * | 3 2 1 0 | 9 8 7 6 | 5 4 3 2 | 1 0 9 8 | 7 6 5 4 | 3 2 1 0 | - * +---------+---------+---------+---------+---------+---------+ - * CPU | 2 2 2 2 | 2 1 1 1 | 1 1 1 1 | 1 1 1 | | | - * | 4 3 2 1 | 0 9 9 8 | 7 6 5 4 | 3 2 0 9 | 8 7 6 5 | 4 3 2 x | - * +---------+---------+---------+---------+---------+---------+ - * - * This means that we can access PCMCIA regions as follows: - * 0x*10000 -> 0x*1ffff - * 0x*70000 -> 0x*7ffff - * 0x*90000 -> 0x*9ffff - * 0x*f0000 -> 0x*fffff - */ - ret = (a & 0xf803fe) << 1; - ret |= (a & 0x03fc00) << 2; - - ret += 0xe8000000; - - if ((a & 0x20000) == (a & 0x40000) >> 1) - return (void __iomem *)ret; - - BUG(); - return NULL; -} - -/* - * read[bwl] and write[bwl] - */ -u8 __readb(const volatile void __iomem *addr) -{ - void __iomem *a = __isamem_convert_addr(addr); - u32 ret; - - if ((unsigned long)addr & 1) - ret = __raw_readl(a); - else - ret = __raw_readb(a); - return ret; -} - -u16 __readw(const volatile void __iomem *addr) -{ - void __iomem *a = __isamem_convert_addr(addr); - - if ((unsigned long)addr & 1) - BUG(); - - return __raw_readw(a); -} - -u32 __readl(const volatile void __iomem *addr) -{ - void __iomem *a = __isamem_convert_addr(addr); - u32 ret; - - if ((unsigned long)addr & 3) - BUG(); - - ret = __raw_readw(a); - ret |= __raw_readw(a + 4) << 16; - return ret; -} - -EXPORT_SYMBOL(__readb); -EXPORT_SYMBOL(__readw); -EXPORT_SYMBOL(__readl); - -void readsw(const volatile void __iomem *addr, void *data, int len) -{ - void __iomem *a = __isamem_convert_addr(addr); - - BUG_ON((unsigned long)addr & 1); - - __raw_readsw(a, data, len); -} -EXPORT_SYMBOL(readsw); - -void readsl(const volatile void __iomem *addr, void *data, int len) -{ - void __iomem *a = __isamem_convert_addr(addr); - - BUG_ON((unsigned long)addr & 3); - - __raw_readsl(a, data, len); -} -EXPORT_SYMBOL(readsl); - -void __writeb(u8 val, volatile void __iomem *addr) -{ - void __iomem *a = __isamem_convert_addr(addr); - - if ((unsigned long)addr & 1) - __raw_writel(val, a); - else - __raw_writeb(val, a); -} - -void __writew(u16 val, volatile void __iomem *addr) -{ - void __iomem *a = __isamem_convert_addr(addr); - - if ((unsigned long)addr & 1) - BUG(); - - __raw_writew(val, a); -} - -void __writel(u32 val, volatile void __iomem *addr) -{ - void __iomem *a = __isamem_convert_addr(addr); - - if ((unsigned long)addr & 3) - BUG(); - - __raw_writew(val, a); - __raw_writew(val >> 16, a + 4); -} - -EXPORT_SYMBOL(__writeb); -EXPORT_SYMBOL(__writew); -EXPORT_SYMBOL(__writel); - -void writesw(volatile void __iomem *addr, const void *data, int len) -{ - void __iomem *a = __isamem_convert_addr(addr); - - BUG_ON((unsigned long)addr & 1); - - __raw_writesw(a, data, len); -} -EXPORT_SYMBOL(writesw); - -void writesl(volatile void __iomem *addr, const void *data, int len) -{ - void __iomem *a = __isamem_convert_addr(addr); - - BUG_ON((unsigned long)addr & 3); - - __raw_writesl(a, data, len); -} -EXPORT_SYMBOL(writesl); - -/* - * The EBSA110 has a weird "ISA IO" region: - * - * Region 0 (addr = 0xf0000000 + io << 2) - * -------------------------------------------------------- - * Physical region IO region - * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0 - * f0000e60 - f0000e64 398 - 399 - * f0000de0 - f0000dfc 378 - 37f lp0 - * f0000be0 - f0000bfc 2f8 - 2ff ttyS1 - * - * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1)) - * -------------------------------------------------------- - * Physical region IO region - * f00014f1 a79 pnp write data - * f00007c0 - f00007c1 3e0 - 3e1 pcmcia - * f00004f1 279 pnp address - * f0000440 - f000046c 220 - 236 eth0 - * f0000405 203 pnp read data - */ -#define SUPERIO_PORT(p) \ - (((p) >> 3) == (0x3f8 >> 3) || \ - ((p) >> 3) == (0x2f8 >> 3) || \ - ((p) >> 3) == (0x378 >> 3)) - -/* - * We're addressing an 8 or 16-bit peripheral which tranfers - * odd addresses on the low ISA byte lane. - */ -u8 __inb8(unsigned int port) -{ - u32 ret; - - /* - * The SuperIO registers use sane addressing techniques... - */ - if (SUPERIO_PORT(port)) - ret = __raw_readb((void __iomem *)ISAIO_BASE + (port << 2)); - else { - void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1); - - /* - * Shame nothing else does - */ - if (port & 1) - ret = __raw_readl(a); - else - ret = __raw_readb(a); - } - return ret; -} - -/* - * We're addressing a 16-bit peripheral which transfers odd - * addresses on the high ISA byte lane. - */ -u8 __inb16(unsigned int port) -{ - unsigned int offset; - - /* - * The SuperIO registers use sane addressing techniques... - */ - if (SUPERIO_PORT(port)) - offset = port << 2; - else - offset = (port & ~1) << 1 | (port & 1); - - return __raw_readb((void __iomem *)ISAIO_BASE + offset); -} - -u16 __inw(unsigned int port) -{ - unsigned int offset; - - /* - * The SuperIO registers use sane addressing techniques... - */ - if (SUPERIO_PORT(port)) - offset = port << 2; - else { - offset = port << 1; - BUG_ON(port & 1); - } - return __raw_readw((void __iomem *)ISAIO_BASE + offset); -} - -/* - * Fake a 32-bit read with two 16-bit reads. Needed for 3c589. - */ -u32 __inl(unsigned int port) -{ - void __iomem *a; - - if (SUPERIO_PORT(port) || port & 3) - BUG(); - - a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1); - - return __raw_readw(a) | __raw_readw(a + 4) << 16; -} - -EXPORT_SYMBOL(__inb8); -EXPORT_SYMBOL(__inb16); -EXPORT_SYMBOL(__inw); -EXPORT_SYMBOL(__inl); - -void __outb8(u8 val, unsigned int port) -{ - /* - * The SuperIO registers use sane addressing techniques... - */ - if (SUPERIO_PORT(port)) - __raw_writeb(val, (void __iomem *)ISAIO_BASE + (port << 2)); - else { - void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1); - - /* - * Shame nothing else does - */ - if (port & 1) - __raw_writel(val, a); - else - __raw_writeb(val, a); - } -} - -void __outb16(u8 val, unsigned int port) -{ - unsigned int offset; - - /* - * The SuperIO registers use sane addressing techniques... - */ - if (SUPERIO_PORT(port)) - offset = port << 2; - else - offset = (port & ~1) << 1 | (port & 1); - - __raw_writeb(val, (void __iomem *)ISAIO_BASE + offset); -} - -void __outw(u16 val, unsigned int port) -{ - unsigned int offset; - - /* - * The SuperIO registers use sane addressing techniques... - */ - if (SUPERIO_PORT(port)) - offset = port << 2; - else { - offset = port << 1; - BUG_ON(port & 1); - } - __raw_writew(val, (void __iomem *)ISAIO_BASE + offset); -} - -void __outl(u32 val, unsigned int port) -{ - BUG(); -} - -EXPORT_SYMBOL(__outb8); -EXPORT_SYMBOL(__outb16); -EXPORT_SYMBOL(__outw); -EXPORT_SYMBOL(__outl); - -void outsb(unsigned int port, const void *from, int len) -{ - u32 off; - - if (SUPERIO_PORT(port)) - off = port << 2; - else { - off = (port & ~1) << 1; - if (port & 1) - BUG(); - } - - __raw_writesb((void __iomem *)ISAIO_BASE + off, from, len); -} - -void insb(unsigned int port, void *from, int len) -{ - u32 off; - - if (SUPERIO_PORT(port)) - off = port << 2; - else { - off = (port & ~1) << 1; - if (port & 1) - BUG(); - } - - __raw_readsb((void __iomem *)ISAIO_BASE + off, from, len); -} - -EXPORT_SYMBOL(outsb); -EXPORT_SYMBOL(insb); - -void outsw(unsigned int port, const void *from, int len) -{ - u32 off; - - if (SUPERIO_PORT(port)) - off = port << 2; - else { - off = (port & ~1) << 1; - if (port & 1) - BUG(); - } - - __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len); -} - -void insw(unsigned int port, void *from, int len) -{ - u32 off; - - if (SUPERIO_PORT(port)) - off = port << 2; - else { - off = (port & ~1) << 1; - if (port & 1) - BUG(); - } - - __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len); -} - -EXPORT_SYMBOL(outsw); -EXPORT_SYMBOL(insw); - -/* - * We implement these as 16-bit insw/outsw, mainly for - * 3c589 cards. - */ -void outsl(unsigned int port, const void *from, int len) -{ - u32 off = port << 1; - - if (SUPERIO_PORT(port) || port & 3) - BUG(); - - __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len << 1); -} - -void insl(unsigned int port, void *from, int len) -{ - u32 off = port << 1; - - if (SUPERIO_PORT(port) || port & 3) - BUG(); - - __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len << 1); -} - -EXPORT_SYMBOL(outsl); -EXPORT_SYMBOL(insl); diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c deleted file mode 100644 index fd1474b66d31..000000000000 --- a/arch/arm/mach-ebsa110/leds.c +++ /dev/null @@ -1,71 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Driver for the LED found on the EBSA110 machine - * Based on Versatile and RealView machine LED code - * - * Author: Bryan Wu <bryan.wu@canonical.com> - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/leds.h> - -#include <asm/mach-types.h> - -#include "core.h" - -#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) -static void ebsa110_led_set(struct led_classdev *cdev, - enum led_brightness b) -{ - u8 reg = __raw_readb(SOFT_BASE); - - if (b != LED_OFF) - reg |= 0x80; - else - reg &= ~0x80; - - __raw_writeb(reg, SOFT_BASE); -} - -static enum led_brightness ebsa110_led_get(struct led_classdev *cdev) -{ - u8 reg = __raw_readb(SOFT_BASE); - - return (reg & 0x80) ? LED_FULL : LED_OFF; -} - -static int __init ebsa110_leds_init(void) -{ - - struct led_classdev *cdev; - int ret; - - if (!machine_is_ebsa110()) - return -ENODEV; - - cdev = kzalloc(sizeof(*cdev), GFP_KERNEL); - if (!cdev) - return -ENOMEM; - - cdev->name = "ebsa110:0"; - cdev->brightness_set = ebsa110_led_set; - cdev->brightness_get = ebsa110_led_get; - cdev->default_trigger = "heartbeat"; - - ret = led_classdev_register(NULL, cdev); - if (ret < 0) { - kfree(cdev); - return ret; - } - - return 0; -} - -/* - * Since we may have triggers on any subsystem, defer registration - * until after subsystem_init. - */ -fs_initcall(ebsa110_leds_init); -#endif diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index d2d249706ebb..56d272967fc0 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -8,7 +8,6 @@ menuconfig ARCH_EXYNOS bool "Samsung Exynos" depends on ARCH_MULTI_V7 - select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_GIC diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 700763e07083..25b01da4771b 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -177,7 +177,8 @@ static void __init exynos_dt_machine_init(void) if (of_machine_is_compatible("samsung,exynos4210") || (of_machine_is_compatible("samsung,exynos4412") && (of_machine_is_compatible("samsung,trats2") || - of_machine_is_compatible("samsung,midas"))) || + of_machine_is_compatible("samsung,midas") || + of_machine_is_compatible("samsung,p4note"))) || of_machine_is_compatible("samsung,exynos3250") || of_machine_is_compatible("samsung,exynos5250")) platform_device_register(&exynos_cpuidle); @@ -206,8 +207,8 @@ static void __init exynos_dt_fixup(void) } DT_MACHINE_START(EXYNOS_DT, "Samsung Exynos (Flattened Device Tree)") - .l2c_aux_val = 0x38400000, - .l2c_aux_mask = 0xc60fffff, + .l2c_aux_val = 0x08400000, + .l2c_aux_mask = 0xf60fffff, .smp = smp_ops(exynos_smp_ops), .map_io = exynos_init_io, .init_early = exynos_firmware_init, diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index d7fedbb2eefe..ea0be59f469a 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -215,7 +215,7 @@ void exynos_core_restart(u32 core_id) unsigned int timeout = 16; u32 val; - if (!of_machine_is_compatible("samsung,exynos3250")) + if (!soc_is_exynos3250()) return; while (timeout && !pmu_raw_readl(S5P_PMU_SPARE2)) { diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 1bc68913d62c..9de38ce8124f 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -2,7 +2,6 @@ config ARCH_HIGHBANK bool "Calxeda ECX-1000/2000 (Highbank/Midway)" depends on ARCH_MULTI_V7 - select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_ERRATA_764369 if SMP diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index d841bed8664d..7bb47eb3fc07 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c @@ -136,7 +136,7 @@ void __init imx_init_revision_from_anatop(void) src_np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-src"); - src_base = of_iomap(np, 0); + src_base = of_iomap(src_np, 0); of_node_put(src_np); WARN_ON(!src_base); sbmr2 = readl_relaxed(src_base + SRC_SBMR2); diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 85c084a716ab..703998ebb52e 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -245,8 +245,13 @@ static void __init imx6q_axi_init(void) static void __init imx6q_init_machine(void) { - if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_2_0) - imx_print_silicon_rev("i.MX6QP", IMX_CHIP_REVISION_1_0); + if (cpu_is_imx6q() && imx_get_soc_revision() >= IMX_CHIP_REVISION_2_0) + /* + * SoCs that identify as i.MX6Q >= rev 2.0 are really i.MX6QP. + * Quirk: i.MX6QP revision = i.MX6Q revision - (1, 0), + * e.g. i.MX6QP rev 1.1 identifies as i.MX6Q rev 2.1. + */ + imx_print_silicon_rev("i.MX6QP", imx_get_soc_revision() - 0x10); else imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", imx_get_soc_revision()); diff --git a/arch/arm/mach-imx/mach-imx7ulp.c b/arch/arm/mach-imx/mach-imx7ulp.c index 445256e6a4a0..a3c8dadec1c5 100644 --- a/arch/arm/mach-imx/mach-imx7ulp.c +++ b/arch/arm/mach-imx/mach-imx7ulp.c @@ -37,6 +37,7 @@ static void __init imx7ulp_set_revision(void) * bit[31:28] of JTAG_ID register defines revision as below from B0: * 0001 B0 * 0010 B1 + * 0011 B2 */ switch (revision >> 28) { case 1: @@ -45,6 +46,9 @@ static void __init imx7ulp_set_revision(void) case 2: imx_set_soc_revision(IMX_CHIP_REVISION_2_1); break; + case 3: + imx_set_soc_revision(IMX_CHIP_REVISION_2_2); + break; default: imx_set_soc_revision(IMX_CHIP_REVISION_1_0); break; diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index 09a65c2dfd73..cd711bfc591f 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -8,7 +8,7 @@ */ #include <linux/io.h> #include <linux/of.h> -#include <linux/dma-mapping.h> +#include <linux/dma-map-ops.h> #include <linux/init.h> #include <linux/of_platform.h> #include <linux/of_address.h> diff --git a/arch/arm/mach-keystone/memory.h b/arch/arm/mach-keystone/memory.h index 9147565d0581..1b9ed1271e05 100644 --- a/arch/arm/mach-keystone/memory.h +++ b/arch/arm/mach-keystone/memory.h @@ -6,9 +6,6 @@ #ifndef __MEMORY_H #define __MEMORY_H -#define MAX_PHYSMEM_BITS 36 -#define SECTION_SIZE_BITS 34 - #define KEYSTONE_LOW_PHYS_START 0x80000000ULL #define KEYSTONE_LOW_PHYS_SIZE 0x80000000ULL /* 2G */ #define KEYSTONE_LOW_PHYS_END (KEYSTONE_LOW_PHYS_START + \ diff --git a/arch/arm/mach-mstar/mstarv7.c b/arch/arm/mach-mstar/mstarv7.c index 81a4cbcab206..274c4f0df270 100644 --- a/arch/arm/mach-mstar/mstarv7.c +++ b/arch/arm/mach-mstar/mstarv7.c @@ -31,10 +31,18 @@ #define MSTARV7_L3BRIDGE_FLUSH_TRIGGER BIT(0) #define MSTARV7_L3BRIDGE_STATUS_DONE BIT(12) +#ifdef CONFIG_SMP +#define MSTARV7_CPU1_BOOT_ADDR_HIGH 0x4c +#define MSTARV7_CPU1_BOOT_ADDR_LOW 0x50 +#define MSTARV7_CPU1_UNLOCK 0x58 +#define MSTARV7_CPU1_UNLOCK_MAGIC 0xbabe +#endif + static void __iomem *l3bridge; static const char * const mstarv7_board_dt_compat[] __initconst = { "mstar,infinity", + "mstar,infinity2m", "mstar,infinity3", "mstar,mercury5", NULL, @@ -62,6 +70,46 @@ static void mstarv7_mb(void) } } +#ifdef CONFIG_SMP +static int mstarv7_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + struct device_node *np; + u32 bootaddr = (u32) __pa_symbol(secondary_startup_arm); + void __iomem *smpctrl; + + /* + * right now we don't know how to boot anything except + * cpu 1. + */ + if (cpu != 1) + return -EINVAL; + + np = of_find_compatible_node(NULL, NULL, "mstar,smpctrl"); + smpctrl = of_iomap(np, 0); + + if (!smpctrl) + return -ENODEV; + + /* set the boot address for the second cpu */ + writew(bootaddr & 0xffff, smpctrl + MSTARV7_CPU1_BOOT_ADDR_LOW); + writew((bootaddr >> 16) & 0xffff, smpctrl + MSTARV7_CPU1_BOOT_ADDR_HIGH); + + /* unlock the second cpu */ + writew(MSTARV7_CPU1_UNLOCK_MAGIC, smpctrl + MSTARV7_CPU1_UNLOCK); + + /* and away we go...*/ + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + iounmap(smpctrl); + + return 0; +} + +static const struct smp_operations __initdata mstarv7_smp_ops = { + .smp_boot_secondary = mstarv7_boot_secondary, +}; +#endif + static void __init mstarv7_init(void) { struct device_node *np; @@ -77,4 +125,5 @@ static void __init mstarv7_init(void) DT_MACHINE_START(MSTARV7_DT, "MStar/Sigmastar Armv7 (Device Tree)") .dt_compat = mstarv7_board_dt_compat, .init_machine = mstarv7_init, + .smp = smp_ops(mstarv7_smp_ops), MACHINE_END diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S index 2d962fe48821..a3a64bf97250 100644 --- a/arch/arm/mach-mvebu/coherency_ll.S +++ b/arch/arm/mach-mvebu/coherency_ll.S @@ -35,13 +35,8 @@ ENTRY(ll_get_coherency_base) /* * MMU is disabled, use the physical address of the coherency - * base address. However, if the coherency fabric isn't mapped - * (i.e its virtual address is zero), it means coherency is - * not enabled, so we return 0. + * base address, (or 0x0 if the coherency fabric is not mapped) */ - ldr r1, =coherency_base - cmp r1, #0 - beq 2f adr r1, 3f ldr r3, [r1] ldr r1, [r1, r3] diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index c109f47e9cbc..25c9d184fa4c 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -22,6 +22,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> +#include <asm/system_info.h> #include <asm/system_misc.h> #include "pm.h" @@ -51,6 +52,9 @@ #define MXS_CLR_ADDR 0x8 #define MXS_TOG_ADDR 0xc +#define HW_OCOTP_OPS2 19 /* offset 0x150 */ +#define HW_OCOTP_OPS3 20 /* offset 0x160 */ + static u32 chipid; static u32 socid; @@ -379,6 +383,8 @@ static void __init mxs_machine_init(void) struct device *parent; struct soc_device *soc_dev; struct soc_device_attribute *soc_dev_attr; + u64 soc_uid = 0; + const u32 *ocotp = mxs_get_ocotp(); int ret; soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); @@ -394,8 +400,21 @@ static void __init mxs_machine_init(void) soc_dev_attr->soc_id = mxs_get_soc_id(); soc_dev_attr->revision = mxs_get_revision(); + if (socid == HW_DIGCTL_CHIPID_MX23) { + soc_uid = system_serial_low = ocotp[HW_OCOTP_OPS3]; + } else if (socid == HW_DIGCTL_CHIPID_MX28) { + soc_uid = system_serial_high = ocotp[HW_OCOTP_OPS2]; + soc_uid <<= 32; + system_serial_low = ocotp[HW_OCOTP_OPS3]; + soc_uid |= system_serial_low; + } + + if (soc_uid) + soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX", soc_uid); + soc_dev = soc_device_register(soc_dev_attr); if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->serial_number); kfree(soc_dev_attr->revision); kfree(soc_dev_attr); return; diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index cb7ce627ffe8..c40cf5ef8607 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -16,6 +16,7 @@ * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com> */ #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/delay.h> @@ -46,6 +47,9 @@ #include "common.h" #include "board-h2.h" +/* The first 16 SoC GPIO lines are on this GPIO chip */ +#define OMAP_GPIO_LABEL "gpio-0-15" + /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define OMAP1610_ETHR_START 0x04000300 @@ -334,7 +338,19 @@ static struct i2c_board_info __initdata h2_i2c_board_info[] = { I2C_BOARD_INFO("tps65010", 0x48), .platform_data = &tps_board, }, { - I2C_BOARD_INFO("isp1301_omap", 0x2d), + .type = "isp1301_omap", + .addr = 0x2d, + .dev_name = "isp1301", + }, +}; + +static struct gpiod_lookup_table isp1301_gpiod_table = { + .dev_id = "isp1301", + .table = { + /* Active low since the irq triggers on falling edge */ + GPIO_LOOKUP(OMAP_GPIO_LABEL, 2, + NULL, GPIO_ACTIVE_LOW), + { }, }, }; @@ -406,8 +422,10 @@ static void __init h2_init(void) h2_smc91x_resources[1].end = gpio_to_irq(0); platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); omap_serial_init(); + + /* ISP1301 IRQ wired at M14 */ + omap_cfg_reg(M14_1510_GPIO2); h2_i2c_board_info[0].irq = gpio_to_irq(58); - h2_i2c_board_info[1].irq = gpio_to_irq(2); omap_register_i2c_bus(1, 100, h2_i2c_board_info, ARRAY_SIZE(h2_i2c_board_info)); omap1_usb_init(&h2_usb_config); diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 144b9caa935c..a720259099ed 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -288,7 +288,7 @@ static struct gpiod_lookup_table osk_usb_gpio_table = { .dev_id = "ohci", .table = { /* Power GPIO on the I2C-attached TPS65010 */ - GPIO_LOOKUP("i2c-tps65010", 1, "power", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("tps65010", 0, "power", GPIO_ACTIVE_HIGH), GPIO_LOOKUP(OMAP_GPIO_LABEL, 9, "overcurrent", GPIO_ACTIVE_HIGH), }, diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index bd5be82101f3..9d4a0ab50a46 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -612,7 +612,7 @@ int clk_enable(struct clk *clk) unsigned long flags; int ret; - if (clk == NULL || IS_ERR(clk)) + if (IS_ERR_OR_NULL(clk)) return -EINVAL; spin_lock_irqsave(&clockfw_lock, flags); @@ -627,7 +627,7 @@ void clk_disable(struct clk *clk) { unsigned long flags; - if (clk == NULL || IS_ERR(clk)) + if (IS_ERR_OR_NULL(clk)) return; spin_lock_irqsave(&clockfw_lock, flags); @@ -650,7 +650,7 @@ unsigned long clk_get_rate(struct clk *clk) unsigned long flags; unsigned long ret; - if (clk == NULL || IS_ERR(clk)) + if (IS_ERR_OR_NULL(clk)) return 0; spin_lock_irqsave(&clockfw_lock, flags); @@ -670,7 +670,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate) unsigned long flags; long ret; - if (clk == NULL || IS_ERR(clk)) + if (IS_ERR_OR_NULL(clk)) return 0; spin_lock_irqsave(&clockfw_lock, flags); @@ -686,7 +686,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate) unsigned long flags; int ret = -EINVAL; - if (clk == NULL || IS_ERR(clk)) + if (IS_ERR_OR_NULL(clk)) return ret; spin_lock_irqsave(&clockfw_lock, flags); @@ -791,7 +791,7 @@ void clk_preinit(struct clk *clk) int clk_register(struct clk *clk) { - if (clk == NULL || IS_ERR(clk)) + if (IS_ERR_OR_NULL(clk)) return -EINVAL; /* @@ -817,7 +817,7 @@ EXPORT_SYMBOL(clk_register); void clk_unregister(struct clk *clk) { - if (clk == NULL || IS_ERR(clk)) + if (IS_ERR_OR_NULL(clk)) return; mutex_lock(&clocks_mutex); diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index ba8566204ea9..86d3b3c157af 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -9,7 +9,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/dma-mapping.h> +#include <linux/dma-map-ops.h> #include <linux/io.h> #include <asm/irq.h> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 3ee7bdff86b2..4a59c169a113 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -2,12 +2,15 @@ menu "TI OMAP/AM/DM/DRA Family" depends on ARCH_MULTI_V6 || ARCH_MULTI_V7 +config OMAP_HWMOD + bool + config ARCH_OMAP2 bool "TI OMAP2" depends on ARCH_MULTI_V6 select ARCH_OMAP2PLUS select CPU_V6 - select PM_GENERIC_DOMAINS if PM + select OMAP_HWMOD select SOC_HAS_OMAP2_SDRC config ARCH_OMAP3 @@ -15,6 +18,7 @@ config ARCH_OMAP3 depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS select ARM_CPU_SUSPEND if PM + select OMAP_HWMOD select OMAP_INTERCONNECT select PM_OPP if PM select PM if CPU_IDLE @@ -31,6 +35,7 @@ config ARCH_OMAP4 select ARM_GIC select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP + select OMAP_HWMOD select OMAP_INTERCONNECT select OMAP_INTERCONNECT_BARRIER select PL310_ERRATA_588369 if CACHE_L2X0 @@ -50,6 +55,7 @@ config SOC_OMAP5 select HAVE_ARM_SCU if SMP select HAVE_ARM_ARCH_TIMER select ARM_ERRATA_798181 if SMP + select OMAP_HWMOD select OMAP_INTERCONNECT select OMAP_INTERCONNECT_BARRIER select PM_OPP if PM @@ -85,6 +91,7 @@ config SOC_DRA7XX select HAVE_ARM_ARCH_TIMER select IRQ_CROSSBAR select ARM_ERRATA_798181 if SMP + select OMAP_HWMOD select OMAP_INTERCONNECT select OMAP_INTERCONNECT_BARRIER select PM_OPP if PM @@ -94,7 +101,6 @@ config SOC_DRA7XX config ARCH_OMAP2PLUS bool select ARCH_HAS_BANDGAP - select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_HAS_RESET_CONTROLLER select ARCH_OMAP select CLKSRC_MMIO @@ -106,6 +112,8 @@ config ARCH_OMAP2PLUS select OMAP_DM_TIMER select OMAP_GPMC select PINCTRL + select PM_GENERIC_DOMAINS if PM + select PM_GENERIC_DOMAINS_OF if PM select RESET_CONTROLLER select SOC_BUS select TI_SYSC diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 732e614c56b2..9bcfb34a2206 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -8,20 +8,22 @@ ccflags-y := -I$(srctree)/$(src)/include \ # Common support obj-y := id.o io.o control.o devices.o fb.o pm.o \ - common.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ - omap_device.o omap-headsmp.o sram.o + common.o dma.o omap-headsmp.o sram.o hwmod-common = omap_hwmod.o omap_hwmod_reset.o \ - omap_hwmod_common_data.o + omap_hwmod_common_data.o \ + omap_hwmod_common_ipblock_data.o \ + omap_device.o display.o hdq1w.o \ + i2c.o wd_timer.o clock-common = clock.o secure-common = omap-smc.o omap-secure.o obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common) -obj-$(CONFIG_SOC_AM33XX) += $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_AM33XX) += $(secure-common) obj-$(CONFIG_SOC_OMAP5) += $(hwmod-common) $(secure-common) -obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_AM43XX) += $(secure-common) obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common) ifneq ($(CONFIG_SND_SOC_OMAP_MCBSP),) @@ -194,7 +196,6 @@ obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o # hwmod data -obj-y += omap_hwmod_common_ipblock_data.o obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o @@ -205,12 +206,6 @@ obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_interconnect_data.o obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o -obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_data.o -obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_43xx_interconnect_data.o -obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_43xx_ipblock_data.o -obj-$(CONFIG_SOC_AM43XX) += omap_hwmod_43xx_data.o -obj-$(CONFIG_SOC_AM43XX) += omap_hwmod_33xx_43xx_interconnect_data.o -obj-$(CONFIG_SOC_AM43XX) += omap_hwmod_33xx_43xx_ipblock_data.o obj-$(CONFIG_SOC_TI81XX) += omap_hwmod_81xx_data.o obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o obj-$(CONFIG_SOC_OMAP5) += omap_hwmod_54xx_data.o diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 2a3e72286d3a..edf046b470ba 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -235,7 +235,7 @@ void omap2xxx_clkt_vps_init(void) hw = kzalloc(sizeof(*hw), GFP_KERNEL); if (!hw) - goto cleanup; + return; init.name = "virt_prcm_set"; init.ops = &virt_prcm_set_ops; init.parent_names = &parent_name; @@ -244,9 +244,12 @@ void omap2xxx_clkt_vps_init(void) hw->hw.init = &init; clk = clk_register(NULL, &hw->hw); + if (IS_ERR(clk)) { + printk(KERN_ERR "Failed to register clock\n"); + kfree(hw); + return; + } + clkdev_create(clk, "cpufreq_ck", NULL); - return; -cleanup: - kfree(hw); } #endif diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index a92d277f81a0..c8d317fafe2e 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -175,8 +175,11 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, if (mpuss_can_lose_context) { error = cpu_cluster_pm_enter(); if (error) { - omap_set_pwrdm_state(mpu_pd, PWRDM_POWER_ON); - goto cpu_cluster_pm_out; + index = 0; + cx = state_ptr + index; + pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state); + omap_set_pwrdm_state(mpu_pd, cx->mpu_state); + mpuss_can_lose_context = 0; } } } @@ -184,7 +187,6 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, omap4_enter_lowpower(dev->cpu, cx->cpu_state); cpu_done[dev->cpu] = true; -cpu_cluster_pm_out: /* Wakeup CPU1 only if it is not offlined */ if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) { diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 2000fca6bd4e..6daaa645ae5d 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -385,8 +385,7 @@ int omap_dss_reset(struct omap_hwmod *oh) } for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) - if (oc->_clk) - clk_prepare_enable(oc->_clk); + clk_prepare_enable(oc->_clk); dispc_disable_outputs(); @@ -412,8 +411,7 @@ int omap_dss_reset(struct omap_hwmod *oh) pr_debug("dss_core: softreset done\n"); for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) - if (oc->_clk) - clk_disable_unprepare(oc->_clk); + clk_disable_unprepare(oc->_clk); r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0; diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 27608d1026cb..060ba6957b7c 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -567,8 +567,6 @@ void __init am33xx_init_early(void) omap2_prcm_base_init(); am33xx_powerdomains_init(); am33xx_clockdomains_init(); - am33xx_hwmod_init(); - omap_hwmod_init_postsetup(); omap_clk_soc_init = am33xx_dt_clk_init; omap_secure_init(); } @@ -590,8 +588,6 @@ void __init am43xx_init_early(void) omap2_prcm_base_init(); am43xx_powerdomains_init(); am43xx_clockdomains_init(); - am43xx_hwmod_init(); - omap_hwmod_init_postsetup(); omap_l2_cache_init(); omap_clk_soc_init = am43xx_dt_clk_init; omap_secure_init(); diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index fc7bb2ca1672..f3191704cab9 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -334,10 +334,9 @@ struct omap_device *omap_device_alloc(struct platform_device *pdev, struct omap_hwmod **hwmods; od = kzalloc(sizeof(struct omap_device), GFP_KERNEL); - if (!od) { - ret = -ENOMEM; + if (!od) goto oda_exit1; - } + od->hwmods_cnt = oh_cnt; hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 15b29a179c8a..2310cd56e99b 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -627,6 +627,9 @@ static struct clockdomain *_get_clkdm(struct omap_hwmod *oh) { struct clk_hw_omap *clk; + if (!oh) + return NULL; + if (oh->clkdm) { return oh->clkdm; } else if (oh->_clk) { @@ -3677,6 +3680,9 @@ static void __init omap_hwmod_setup_earlycon_flags(void) */ static int __init omap_hwmod_setup_all(void) { + if (!inited) + return 0; + _ensure_mpu_hwmod_is_setup(NULL); omap_hwmod_for_each(_init, NULL); diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h deleted file mode 100644 index e29841072287..000000000000 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * - * Copyright (C) 2013 Texas Instruments Incorporated - * - * Data common for AM335x and AM43x - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_33XX_43XX_COMMON_DATA_H -#define __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_33XX_43XX_COMMON_DATA_H - -extern struct omap_hwmod_ocp_if am33xx_mpu__l3_main; -extern struct omap_hwmod_ocp_if am33xx_l3_main__l3_s; -extern struct omap_hwmod_ocp_if am33xx_l3_s__l4_ls; -extern struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup; -extern struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr; -extern struct omap_hwmod_ocp_if am33xx_mpu__prcm; -extern struct omap_hwmod_ocp_if am33xx_l3_s__l3_main; -extern struct omap_hwmod_ocp_if am33xx_gfx__l3_main; -extern struct omap_hwmod_ocp_if am33xx_l3_main__gfx; -extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer2; -extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc; - -extern struct omap_hwmod am33xx_l3_main_hwmod; -extern struct omap_hwmod am33xx_l3_s_hwmod; -extern struct omap_hwmod am33xx_l3_instr_hwmod; -extern struct omap_hwmod am33xx_l4_ls_hwmod; -extern struct omap_hwmod am33xx_l4_wkup_hwmod; -extern struct omap_hwmod am33xx_mpu_hwmod; -extern struct omap_hwmod am33xx_gfx_hwmod; -extern struct omap_hwmod am33xx_prcm_hwmod; -extern struct omap_hwmod am33xx_ocmcram_hwmod; -extern struct omap_hwmod am33xx_smartreflex0_hwmod; -extern struct omap_hwmod am33xx_smartreflex1_hwmod; -extern struct omap_hwmod am33xx_gpmc_hwmod; - -extern struct omap_hwmod_class am33xx_emif_hwmod_class; -extern struct omap_hwmod_class am33xx_l4_hwmod_class; -extern struct omap_hwmod_class am33xx_wkup_m3_hwmod_class; -extern struct omap_hwmod_class am33xx_control_hwmod_class; -extern struct omap_hwmod_class am33xx_timer_hwmod_class; -extern struct omap_hwmod_class am33xx_ehrpwm_hwmod_class; -extern struct omap_hwmod_class am33xx_spi_hwmod_class; - -void omap_hwmod_am33xx_reg(void); -void omap_hwmod_am43xx_reg(void); - -#endif diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c deleted file mode 100644 index ab5146bfe941..000000000000 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * - * Copyright (C) 2013 Texas Instruments Incorporated - * - * Interconnects common for AM335x and AM43x - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/sizes.h> -#include "omap_hwmod.h" -#include "omap_hwmod_33xx_43xx_common_data.h" - -/* mpu -> l3 main */ -struct omap_hwmod_ocp_if am33xx_mpu__l3_main = { - .master = &am33xx_mpu_hwmod, - .slave = &am33xx_l3_main_hwmod, - .clk = "dpll_mpu_m2_ck", - .user = OCP_USER_MPU, -}; - -/* l3 main -> l3 s */ -struct omap_hwmod_ocp_if am33xx_l3_main__l3_s = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_l3_s_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3 s -> l4 per/ls */ -struct omap_hwmod_ocp_if am33xx_l3_s__l4_ls = { - .master = &am33xx_l3_s_hwmod, - .slave = &am33xx_l4_ls_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3 s -> l4 wkup */ -struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup = { - .master = &am33xx_l3_s_hwmod, - .slave = &am33xx_l4_wkup_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3 main -> l3 instr */ -struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_l3_instr_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> prcm */ -struct omap_hwmod_ocp_if am33xx_mpu__prcm = { - .master = &am33xx_mpu_hwmod, - .slave = &am33xx_prcm_hwmod, - .clk = "dpll_mpu_m2_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3 s -> l3 main*/ -struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = { - .master = &am33xx_l3_s_hwmod, - .slave = &am33xx_l3_main_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3s cfg -> gpmc */ -struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = { - .master = &am33xx_l3_s_hwmod, - .slave = &am33xx_gpmc_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU, -}; - -/* l3 main -> ocmc */ -struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_ocmcram_hwmod, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c deleted file mode 100644 index bcc120ed610a..000000000000 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ /dev/null @@ -1,290 +0,0 @@ -/* - * - * Copyright (C) 2013 Texas Instruments Incorporated - * - * Hwmod common for AM335x and AM43x - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/types.h> - -#include "omap_hwmod.h" -#include "cm33xx.h" -#include "prm33xx.h" -#include "omap_hwmod_33xx_43xx_common_data.h" -#include "prcm43xx.h" -#include "common.h" - -#define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl)) -#define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl)) -#define RSTST(oh, rstst) ((oh).prcm.omap4.rstst_offs = (rstst)) - -/* - * 'l3' class - * instance(s): l3_main, l3_s, l3_instr - */ -static struct omap_hwmod_class am33xx_l3_hwmod_class = { - .name = "l3", -}; - -struct omap_hwmod am33xx_l3_main_hwmod = { - .name = "l3_main", - .class = &am33xx_l3_hwmod_class, - .clkdm_name = "l3_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* l3_s */ -struct omap_hwmod am33xx_l3_s_hwmod = { - .name = "l3_s", - .class = &am33xx_l3_hwmod_class, - .clkdm_name = "l3s_clkdm", -}; - -/* l3_instr */ -struct omap_hwmod am33xx_l3_instr_hwmod = { - .name = "l3_instr", - .class = &am33xx_l3_hwmod_class, - .clkdm_name = "l3_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'l4' class - * instance(s): l4_ls, l4_hs, l4_wkup, l4_fw - */ -struct omap_hwmod_class am33xx_l4_hwmod_class = { - .name = "l4", -}; - -/* l4_ls */ -struct omap_hwmod am33xx_l4_ls_hwmod = { - .name = "l4_ls", - .class = &am33xx_l4_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* l4_wkup */ -struct omap_hwmod am33xx_l4_wkup_hwmod = { - .name = "l4_wkup", - .class = &am33xx_l4_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'mpu' class - */ -static struct omap_hwmod_class am33xx_mpu_hwmod_class = { - .name = "mpu", -}; - -struct omap_hwmod am33xx_mpu_hwmod = { - .name = "mpu", - .class = &am33xx_mpu_hwmod_class, - .clkdm_name = "mpu_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "dpll_mpu_m2_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'wakeup m3' class - * Wakeup controller sub-system under wakeup domain - */ -struct omap_hwmod_class am33xx_wkup_m3_hwmod_class = { - .name = "wkup_m3", -}; - -/* - * 'prcm' class - * power and reset manager (whole prcm infrastructure) - */ -static struct omap_hwmod_class am33xx_prcm_hwmod_class = { - .name = "prcm", -}; - -/* prcm */ -struct omap_hwmod am33xx_prcm_hwmod = { - .name = "prcm", - .class = &am33xx_prcm_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", -}; - -/* - * 'emif' class - * instance(s): emif - */ -static struct omap_hwmod_class_sysconfig am33xx_emif_sysc = { - .rev_offs = 0x0000, -}; - -struct omap_hwmod_class am33xx_emif_hwmod_class = { - .name = "emif", - .sysc = &am33xx_emif_sysc, -}; - - - -/* ocmcram */ -static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = { - .name = "ocmcram", -}; - -struct omap_hwmod am33xx_ocmcram_hwmod = { - .name = "ocmcram", - .class = &am33xx_ocmcram_hwmod_class, - .clkdm_name = "l3_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* 'smartreflex' class */ -static struct omap_hwmod_class am33xx_smartreflex_hwmod_class = { - .name = "smartreflex", -}; - -/* smartreflex0 */ -struct omap_hwmod am33xx_smartreflex0_hwmod = { - .name = "smartreflex0", - .class = &am33xx_smartreflex_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .main_clk = "smartreflex0_fck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* smartreflex1 */ -struct omap_hwmod am33xx_smartreflex1_hwmod = { - .name = "smartreflex1", - .class = &am33xx_smartreflex_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .main_clk = "smartreflex1_fck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'control' module class - */ -struct omap_hwmod_class am33xx_control_hwmod_class = { - .name = "control", -}; - - -/* gpmc */ -static struct omap_hwmod_class_sysconfig gpmc_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x10, - .syss_offs = 0x14, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am33xx_gpmc_hwmod_class = { - .name = "gpmc", - .sysc = &gpmc_sysc, -}; - -struct omap_hwmod am33xx_gpmc_hwmod = { - .name = "gpmc", - .class = &am33xx_gpmc_hwmod_class, - .clkdm_name = "l3s_clkdm", - /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ - .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS, - .main_clk = "l3s_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static void omap_hwmod_am33xx_clkctrl(void) -{ - CLKCTRL(am33xx_smartreflex0_hwmod, - AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_smartreflex1_hwmod, - AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET); - CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET); - CLKCTRL(am33xx_l4_wkup_hwmod, AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET); - CLKCTRL(am33xx_l3_main_hwmod, AM33XX_CM_PER_L3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mpu_hwmod , AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET); - CLKCTRL(am33xx_l3_instr_hwmod , AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET); - CLKCTRL(am33xx_ocmcram_hwmod , AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET); -} - -void omap_hwmod_am33xx_reg(void) -{ - omap_hwmod_am33xx_clkctrl(); -} - -static void omap_hwmod_am43xx_clkctrl(void) -{ - CLKCTRL(am33xx_smartreflex0_hwmod, - AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_smartreflex1_hwmod, - AM43XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_gpmc_hwmod, AM43XX_CM_PER_GPMC_CLKCTRL_OFFSET); - CLKCTRL(am33xx_l4_ls_hwmod, AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET); - CLKCTRL(am33xx_l4_wkup_hwmod, AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET); - CLKCTRL(am33xx_l3_main_hwmod, AM43XX_CM_PER_L3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mpu_hwmod , AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET); - CLKCTRL(am33xx_l3_instr_hwmod , AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET); - CLKCTRL(am33xx_ocmcram_hwmod , AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET); -} - -void omap_hwmod_am43xx_reg(void) -{ - omap_hwmod_am43xx_clkctrl(); -} diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c deleted file mode 100644 index b232f6ca6fe3..000000000000 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * omap_hwmod_33xx_data.c: Hardware modules present on the AM33XX chips - * - * Copyright (C) {2012} Texas Instruments Incorporated - https://www.ti.com/ - * - * This file is automatically generated from the AM33XX hardware databases. - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "omap_hwmod.h" -#include "omap_hwmod_common_data.h" - -#include "control.h" -#include "cm33xx.h" -#include "prm33xx.h" -#include "prm-regbits-33xx.h" -#include "omap_hwmod_33xx_43xx_common_data.h" - -/* - * IP blocks - */ - -/* emif */ -static struct omap_hwmod am33xx_emif_hwmod = { - .name = "emif", - .class = &am33xx_emif_hwmod_class, - .clkdm_name = "l3_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "dpll_ddr_m2_div2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_EMIF_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* l4_hs */ -static struct omap_hwmod am33xx_l4_hs_hwmod = { - .name = "l4_hs", - .class = &am33xx_l4_hwmod_class, - .clkdm_name = "l4hs_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "l4hs_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_L4HS_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod_rst_info am33xx_wkup_m3_resets[] = { - { .name = "wkup_m3", .rst_shift = 3, .st_shift = 5 }, -}; - -/* wkup_m3 */ -static struct omap_hwmod am33xx_wkup_m3_hwmod = { - .name = "wkup_m3", - .class = &am33xx_wkup_m3_hwmod_class, - .clkdm_name = "l4_wkup_aon_clkdm", - /* Keep hardreset asserted */ - .flags = HWMOD_INIT_NO_RESET | HWMOD_NO_IDLEST, - .main_clk = "dpll_core_m4_div2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET, - .rstctrl_offs = AM33XX_RM_WKUP_RSTCTRL_OFFSET, - .rstst_offs = AM33XX_RM_WKUP_RSTST_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .rst_lines = am33xx_wkup_m3_resets, - .rst_lines_cnt = ARRAY_SIZE(am33xx_wkup_m3_resets), -}; - - -/* - * Modules omap_hwmod structures - * - * The following IPs are excluded for the moment because: - * - They do not need an explicit SW control using omap_hwmod API. - * - They still need to be validated with the driver - * properly adapted to omap_hwmod / omap_device - * - * - cEFUSE (doesn't fall under any ocp_if) - * - clkdiv32k - * - ocp watch point - */ -#if 0 -/* - * 'cefuse' class - */ -static struct omap_hwmod_class am33xx_cefuse_hwmod_class = { - .name = "cefuse", -}; - -static struct omap_hwmod am33xx_cefuse_hwmod = { - .name = "cefuse", - .class = &am33xx_cefuse_hwmod_class, - .clkdm_name = "l4_cefuse_clkdm", - .main_clk = "cefuse_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'clkdiv32k' class - */ -static struct omap_hwmod_class am33xx_clkdiv32k_hwmod_class = { - .name = "clkdiv32k", -}; - -static struct omap_hwmod am33xx_clkdiv32k_hwmod = { - .name = "clkdiv32k", - .class = &am33xx_clkdiv32k_hwmod_class, - .clkdm_name = "clk_24mhz_clkdm", - .main_clk = "clkdiv32k_ick", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_CLKDIV32K_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* ocpwp */ -static struct omap_hwmod_class am33xx_ocpwp_hwmod_class = { - .name = "ocpwp", -}; - -static struct omap_hwmod am33xx_ocpwp_hwmod = { - .name = "ocpwp", - .class = &am33xx_ocpwp_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_OCPWP_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; -#endif - -/* - * 'debugss' class - * debug sub system - */ -static struct omap_hwmod_opt_clk debugss_opt_clks[] = { - { .role = "dbg_sysclk", .clk = "dbg_sysclk_ck" }, - { .role = "dbg_clka", .clk = "dbg_clka_ck" }, -}; - -static struct omap_hwmod_class am33xx_debugss_hwmod_class = { - .name = "debugss", -}; - -static struct omap_hwmod am33xx_debugss_hwmod = { - .name = "debugss", - .class = &am33xx_debugss_hwmod_class, - .clkdm_name = "l3_aon_clkdm", - .main_clk = "trace_clk_div_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_WKUP_DEBUGSS_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = debugss_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(debugss_opt_clks), -}; - -static struct omap_hwmod am33xx_control_hwmod = { - .name = "control", - .class = &am33xx_control_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "dpll_core_m4_div2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - - -/* - * Interfaces - */ - -/* l3 main -> emif */ -static struct omap_hwmod_ocp_if am33xx_l3_main__emif = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_emif_hwmod, - .clk = "dpll_core_m4_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3 main -> l4 hs */ -static struct omap_hwmod_ocp_if am33xx_l3_main__l4_hs = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_l4_hs_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* wkup m3 -> l4 wkup */ -static struct omap_hwmod_ocp_if am33xx_wkup_m3__l4_wkup = { - .master = &am33xx_wkup_m3_hwmod, - .slave = &am33xx_l4_wkup_hwmod, - .clk = "dpll_core_m4_div2_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4 wkup -> wkup m3 */ -static struct omap_hwmod_ocp_if am33xx_l4_wkup__wkup_m3 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_wkup_m3_hwmod, - .clk = "dpll_core_m4_div2_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main -> debugss */ -static struct omap_hwmod_ocp_if am33xx_l3_main__debugss = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_debugss_hwmod, - .clk = "dpll_core_m4_ck", - .user = OCP_USER_MPU, -}; - -/* l4 wkup -> smartreflex0 */ -static struct omap_hwmod_ocp_if am33xx_l4_wkup__smartreflex0 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_smartreflex0_hwmod, - .clk = "dpll_core_m4_div2_ck", - .user = OCP_USER_MPU, -}; - -/* l4 wkup -> smartreflex1 */ -static struct omap_hwmod_ocp_if am33xx_l4_wkup__smartreflex1 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_smartreflex1_hwmod, - .clk = "dpll_core_m4_div2_ck", - .user = OCP_USER_MPU, -}; - -/* l4 wkup -> control */ -static struct omap_hwmod_ocp_if am33xx_l4_wkup__control = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_control_hwmod, - .clk = "dpll_core_m4_div2_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { - &am33xx_l3_main__emif, - &am33xx_mpu__l3_main, - &am33xx_mpu__prcm, - &am33xx_l3_s__l4_ls, - &am33xx_l3_s__l4_wkup, - &am33xx_l3_main__l4_hs, - &am33xx_l3_main__l3_s, - &am33xx_l3_main__l3_instr, - &am33xx_l3_s__l3_main, - &am33xx_wkup_m3__l4_wkup, - &am33xx_l3_main__debugss, - &am33xx_l4_wkup__wkup_m3, - &am33xx_l4_wkup__control, - &am33xx_l4_wkup__smartreflex0, - &am33xx_l4_wkup__smartreflex1, - &am33xx_l3_s__gpmc, - &am33xx_l3_main__ocmc, - NULL, -}; - -int __init am33xx_hwmod_init(void) -{ - omap_hwmod_am33xx_reg(); - omap_hwmod_init(); - return omap_hwmod_register_links(am33xx_hwmod_ocp_ifs); -} diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c deleted file mode 100644 index b97cb745bbbc..000000000000 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * Copyright (C) 2013 Texas Instruments Incorporated - * - * Hwmod present only in AM43x and those that differ other than register - * offsets as compared to AM335x. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "omap_hwmod.h" -#include "omap_hwmod_33xx_43xx_common_data.h" -#include "prcm43xx.h" -#include "omap_hwmod_common_data.h" - -/* IP blocks */ -static struct omap_hwmod am43xx_emif_hwmod = { - .name = "emif", - .class = &am33xx_emif_hwmod_class, - .clkdm_name = "emif_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "dpll_ddr_m2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod am43xx_l4_hs_hwmod = { - .name = "l4_hs", - .class = &am33xx_l4_hwmod_class, - .clkdm_name = "l3_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "l4hs_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_PER_L4HS_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod_rst_info am33xx_wkup_m3_resets[] = { - { .name = "wkup_m3", .rst_shift = 3, .st_shift = 5 }, -}; - -static struct omap_hwmod am43xx_wkup_m3_hwmod = { - .name = "wkup_m3", - .class = &am33xx_wkup_m3_hwmod_class, - .clkdm_name = "l4_wkup_aon_clkdm", - /* Keep hardreset asserted */ - .flags = HWMOD_INIT_NO_RESET | HWMOD_NO_IDLEST, - .main_clk = "sys_clkin_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET, - .rstctrl_offs = AM43XX_RM_WKUP_RSTCTRL_OFFSET, - .rstst_offs = AM43XX_RM_WKUP_RSTST_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .rst_lines = am33xx_wkup_m3_resets, - .rst_lines_cnt = ARRAY_SIZE(am33xx_wkup_m3_resets), -}; - -static struct omap_hwmod am43xx_control_hwmod = { - .name = "control", - .class = &am33xx_control_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "sys_clkin_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* Interfaces */ -static struct omap_hwmod_ocp_if am43xx_l3_main__emif = { - .master = &am33xx_l3_main_hwmod, - .slave = &am43xx_emif_hwmod, - .clk = "dpll_core_m4_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = { - .master = &am33xx_l3_main_hwmod, - .slave = &am43xx_l4_hs_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if am43xx_wkup_m3__l4_wkup = { - .master = &am43xx_wkup_m3_hwmod, - .slave = &am33xx_l4_wkup_hwmod, - .clk = "sys_clkin_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if am43xx_l4_wkup__wkup_m3 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am43xx_wkup_m3_hwmod, - .clk = "sys_clkin_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if am43xx_l4_wkup__smartreflex0 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_smartreflex0_hwmod, - .clk = "sys_clkin_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if am43xx_l4_wkup__smartreflex1 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_smartreflex1_hwmod, - .clk = "sys_clkin_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if am43xx_l4_wkup__control = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am43xx_control_hwmod, - .clk = "sys_clkin_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { - &am33xx_mpu__l3_main, - &am33xx_mpu__prcm, - &am33xx_l3_s__l4_ls, - &am33xx_l3_s__l4_wkup, - &am43xx_l3_main__l4_hs, - &am33xx_l3_main__l3_s, - &am33xx_l3_main__l3_instr, - &am33xx_l3_s__l3_main, - &am43xx_l3_main__emif, - &am43xx_wkup_m3__l4_wkup, - &am43xx_l4_wkup__wkup_m3, - &am43xx_l4_wkup__control, - &am43xx_l4_wkup__smartreflex0, - &am43xx_l4_wkup__smartreflex1, - &am33xx_l3_s__gpmc, - &am33xx_l3_main__ocmc, - NULL, -}; - -int __init am43xx_hwmod_init(void) -{ - int ret; - - omap_hwmod_am43xx_reg(); - omap_hwmod_init(); - ret = omap_hwmod_register_links(am43xx_hwmod_ocp_ifs); - - return ret; -} diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 37c59115b353..6aa3b8e81a0c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -354,42 +354,6 @@ static struct omap_hwmod omap44xx_emif2_hwmod = { }; /* - * 'gpmc' class - * general purpose memory controller - */ - -static struct omap_hwmod_class_sysconfig omap44xx_gpmc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_gpmc_hwmod_class = { - .name = "gpmc", - .sysc = &omap44xx_gpmc_sysc, -}; - -/* gpmc */ -static struct omap_hwmod omap44xx_gpmc_hwmod = { - .name = "gpmc", - .class = &omap44xx_gpmc_hwmod_class, - .clkdm_name = "l3_2_clkdm", - /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ - .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS, - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3_2_GPMC_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3_2_GPMC_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* * 'iss' class * external images sensor pixel data processor */ @@ -441,39 +405,6 @@ static struct omap_hwmod omap44xx_iss_hwmod = { }; /* - * 'iva' class - * multi-standard video encoder/decoder hardware accelerator - */ - -static struct omap_hwmod_class omap44xx_iva_hwmod_class = { - .name = "iva", -}; - -/* iva */ -static struct omap_hwmod_rst_info omap44xx_iva_resets[] = { - { .name = "seq0", .rst_shift = 0 }, - { .name = "seq1", .rst_shift = 1 }, - { .name = "logic", .rst_shift = 2 }, -}; - -static struct omap_hwmod omap44xx_iva_hwmod = { - .name = "iva", - .class = &omap44xx_iva_hwmod_class, - .clkdm_name = "ivahd_clkdm", - .rst_lines = omap44xx_iva_resets, - .rst_lines_cnt = ARRAY_SIZE(omap44xx_iva_resets), - .main_clk = "dpll_iva_m5x2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_IVAHD_IVAHD_CLKCTRL_OFFSET, - .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET, - .context_offs = OMAP4_RM_IVAHD_IVAHD_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* * 'mpu' class * mpu sub-system */ @@ -644,14 +575,6 @@ static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = { .user = OCP_USER_MPU, }; -/* iva -> l3_instr */ -static struct omap_hwmod_ocp_if omap44xx_iva__l3_instr = { - .master = &omap44xx_iva_hwmod, - .slave = &omap44xx_l3_instr_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_3 -> l3_instr */ static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = { .master = &omap44xx_l3_main_3_hwmod, @@ -708,14 +631,6 @@ static struct omap_hwmod_ocp_if omap44xx_iss__l3_main_2 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* iva -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_iva__l3_main_2 = { - .master = &omap44xx_iva_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_1 -> l3_main_2 */ static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = { .master = &omap44xx_l3_main_1_hwmod, @@ -836,14 +751,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_instr__debugss = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_2 -> gpmc */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_gpmc_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_2 -> iss */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = { .master = &omap44xx_l3_main_2_hwmod, @@ -852,22 +759,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* iva -> sl2if */ -static struct omap_hwmod_ocp_if __maybe_unused omap44xx_iva__sl2if = { - .master = &omap44xx_iva_hwmod, - .slave = &omap44xx_sl2if_hwmod, - .clk = "dpll_iva_m5x2_ck", - .user = OCP_USER_IVA, -}; - -/* l3_main_2 -> iva */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iva = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_iva_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU, -}; - /* l3_main_2 -> ocmc_ram */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ocmc_ram = { .master = &omap44xx_l3_main_2_hwmod, @@ -943,7 +834,6 @@ static struct omap_hwmod_ocp_if omap44xx_mpu__emif2 = { static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l3_main_1__dmm, &omap44xx_mpu__dmm, - &omap44xx_iva__l3_instr, &omap44xx_l3_main_3__l3_instr, &omap44xx_ocp_wp_noc__l3_instr, &omap44xx_l3_main_2__l3_main_1, @@ -951,7 +841,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_mpu__l3_main_1, &omap44xx_debugss__l3_main_2, &omap44xx_iss__l3_main_2, - &omap44xx_iva__l3_main_2, &omap44xx_l3_main_1__l3_main_2, &omap44xx_l4_cfg__l3_main_2, &omap44xx_l3_main_1__l3_main_3, @@ -967,10 +856,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_wkup__ctrl_module_wkup, &omap44xx_l4_wkup__ctrl_module_pad_wkup, &omap44xx_l3_instr__debugss, - &omap44xx_l3_main_2__gpmc, &omap44xx_l3_main_2__iss, - /* &omap44xx_iva__sl2if, */ - &omap44xx_l3_main_2__iva, &omap44xx_l3_main_2__ocmc_ram, &omap44xx_mpu_private__prcm_mpu, &omap44xx_l4_wkup__cm_core_aon, diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 05e163c8337a..48c2a808bd46 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -243,46 +243,6 @@ static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = { }; /* - * 'gpmc' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_gpmc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class dra7xx_gpmc_hwmod_class = { - .name = "gpmc", - .sysc = &dra7xx_gpmc_sysc, -}; - -/* gpmc */ - -static struct omap_hwmod dra7xx_gpmc_hwmod = { - .name = "gpmc", - .class = &dra7xx_gpmc_hwmod_class, - .clkdm_name = "l3main1_clkdm", - /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ - .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3MAIN1_GPMC_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3MAIN1_GPMC_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - - - -/* * 'mpu' class * */ @@ -611,14 +571,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_1 -> gpmc */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_gpmc_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> mpu */ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = { .master = &dra7xx_l4_cfg_hwmod, @@ -722,7 +674,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per2__atl, &dra7xx_l3_main_1__bb2d, &dra7xx_l4_wkup__ctrl_module_wkup, - &dra7xx_l3_main_1__gpmc, &dra7xx_l4_cfg__mpu, &dra7xx_l3_main_1__pciess1, &dra7xx_l4_cfg__pciess1, diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 2a4fe3e68b82..cd38bf07c094 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -94,6 +94,7 @@ static void __init hsmmc2_internal_input_clk(void) omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1); } +#ifdef CONFIG_OMAP_HWMOD static struct iommu_platform_data omap3_iommu_pdata = { .reset_name = "mmu", .assert_reset = omap_device_assert_hardreset, @@ -106,6 +107,7 @@ static struct iommu_platform_data omap3_iommu_isp_pdata = { .device_enable = omap_device_enable, .device_idle = omap_device_idle, }; +#endif static int omap3_sbc_t3730_twl_callback(struct device *dev, unsigned gpio, @@ -272,14 +274,6 @@ static void __init omap3_pandora_legacy_init(void) } #endif /* CONFIG_ARCH_OMAP3 */ -#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) -static struct wkup_m3_platform_data wkup_m3_data = { - .reset_name = "wkup_m3", - .assert_reset = omap_device_assert_hardreset, - .deassert_reset = omap_device_deassert_hardreset, -}; -#endif - #ifdef CONFIG_SOC_OMAP5 static void __init omap5_uevm_legacy_init(void) { @@ -370,6 +364,7 @@ static void ti_sysc_clkdm_allow_idle(struct device *dev, clkdm_allow_idle(cookie->clkdm); } +#ifdef CONFIG_OMAP_HWMOD static int ti_sysc_enable_module(struct device *dev, const struct ti_sysc_cookie *cookie) { @@ -396,6 +391,7 @@ static int ti_sysc_shutdown_module(struct device *dev, return omap_hwmod_shutdown(cookie->data); } +#endif /* CONFIG_OMAP_HWMOD */ static bool ti_sysc_soc_type_gp(void) { @@ -410,10 +406,12 @@ static struct ti_sysc_platform_data ti_sysc_pdata = { .init_clockdomain = ti_sysc_clkdm_init, .clkdm_deny_idle = ti_sysc_clkdm_deny_idle, .clkdm_allow_idle = ti_sysc_clkdm_allow_idle, +#ifdef CONFIG_OMAP_HWMOD .init_module = omap_hwmod_init_module, .enable_module = ti_sysc_enable_module, .idle_module = ti_sysc_idle_module, .shutdown_module = ti_sysc_shutdown_module, +#endif }; static struct pcs_pdata pcs_pdata; @@ -501,14 +499,6 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = { OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49024000, "49024000.mcbsp", &mcbsp_pdata), #endif #endif -#ifdef CONFIG_SOC_AM33XX - OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3", - &wkup_m3_data), -#endif -#ifdef CONFIG_SOC_AM43XX - OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3", - &wkup_m3_data), -#endif #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) OF_DEV_AUXDATA("ti,omap4-smartreflex-iva", 0x4a0db000, "4a0db000.smartreflex", &omap_sr_pdata[OMAP_SR_IVA]), @@ -580,6 +570,8 @@ static void pdata_quirks_check(struct pdata_init *quirks) void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table) { + struct device_node *np; + /* * We still need this for omap2420 and omap3 PM to work, others are * using drivers/misc/sram.c already. @@ -591,6 +583,15 @@ void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table) if (of_machine_is_compatible("ti,omap3")) omap3_mcbsp_init(); pdata_quirks_check(auxdata_quirks); + + /* Populate always-on PRCM in l4_wkup to probe l4_wkup */ + np = of_find_node_by_name(NULL, "prcm"); + if (!np) + np = of_find_node_by_name(NULL, "prm"); + if (np) + of_platform_populate(np, omap_dt_match_table, + omap_auxdata_lookup, NULL); + of_platform_populate(NULL, omap_dt_match_table, omap_auxdata_lookup, NULL); pdata_quirks_check(pdata_quirks); diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c index da85cac761ba..9f8edcfe9357 100644 --- a/arch/arm/mach-rpc/time.c +++ b/arch/arm/mach-rpc/time.c @@ -81,7 +81,7 @@ static irqreturn_t ioc_timer_interrupt(int irq, void *dev_id) { ioc_time += RPC_LATCH; - timer_tick(); + legacy_timer_tick(1); return IRQ_HANDLED; } diff --git a/arch/arm/mach-s3c/common-smdk-s3c24xx.c b/arch/arm/mach-s3c/common-smdk-s3c24xx.c index f860d8bcba0e..6d124bbd384c 100644 --- a/arch/arm/mach-s3c/common-smdk-s3c24xx.c +++ b/arch/arm/mach-s3c/common-smdk-s3c24xx.c @@ -20,7 +20,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> -#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/nand-ecc-sw-hamming.h> #include <linux/mtd/partitions.h> #include <linux/io.h> diff --git a/arch/arm/mach-s3c/mach-anubis.c b/arch/arm/mach-s3c/mach-anubis.c index 90e3fd98a3ac..04147cc0adcc 100644 --- a/arch/arm/mach-s3c/mach-anubis.c +++ b/arch/arm/mach-s3c/mach-anubis.c @@ -34,7 +34,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> -#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/nand-ecc-sw-hamming.h> #include <linux/mtd/partitions.h> #include <net/ax88796.h> diff --git a/arch/arm/mach-s3c/mach-at2440evb.c b/arch/arm/mach-s3c/mach-at2440evb.c index 5fa49d4e2650..c6a5a51d84aa 100644 --- a/arch/arm/mach-s3c/mach-at2440evb.c +++ b/arch/arm/mach-s3c/mach-at2440evb.c @@ -35,7 +35,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> -#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/nand-ecc-sw-hamming.h> #include <linux/mtd/partitions.h> #include "devs.h" diff --git a/arch/arm/mach-s3c/mach-bast.c b/arch/arm/mach-s3c/mach-bast.c index 328f5d9ae9f9..27e8d5950228 100644 --- a/arch/arm/mach-s3c/mach-bast.c +++ b/arch/arm/mach-s3c/mach-bast.c @@ -24,7 +24,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> -#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/nand-ecc-sw-hamming.h> #include <linux/mtd/partitions.h> #include <linux/platform_data/asoc-s3c24xx_simtec.h> diff --git a/arch/arm/mach-s3c/mach-gta02.c b/arch/arm/mach-s3c/mach-gta02.c index 3c75c7d112ea..aec8b451c016 100644 --- a/arch/arm/mach-s3c/mach-gta02.c +++ b/arch/arm/mach-s3c/mach-gta02.c @@ -37,7 +37,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> -#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/nand-ecc-sw-hamming.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-s3c/mach-h1940.c b/arch/arm/mach-s3c/mach-h1940.c index 53d51aa83200..8a43ed1c4c4d 100644 --- a/arch/arm/mach-s3c/mach-h1940.c +++ b/arch/arm/mach-s3c/mach-h1940.c @@ -297,6 +297,15 @@ static const struct s3c_adc_bat_thresh bat_lut_acin[] = { { .volt = 3841, .cur = 0, .level = 0}, }; +static struct gpiod_lookup_table h1940_bat_gpio_table = { + .dev_id = "s3c-adc-battery", + .table = { + /* Charge status S3C2410_GPF(3) */ + GPIO_LOOKUP("GPIOF", 3, "charge-status", GPIO_ACTIVE_LOW), + { }, + }, +}; + static int h1940_bat_init(void) { int ret; @@ -330,8 +339,6 @@ static struct s3c_adc_bat_pdata h1940_bat_cfg = { .exit = h1940_bat_exit, .enable_charger = h1940_enable_charger, .disable_charger = h1940_disable_charger, - .gpio_charge_finished = S3C2410_GPF(3), - .gpio_inverted = 1, .lut_noac = bat_lut_noac, .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac), .lut_acin = bat_lut_acin, @@ -720,6 +727,7 @@ static void __init h1940_init(void) s3c24xx_fb_set_platdata(&h1940_fb_info); gpiod_add_lookup_table(&h1940_mmc_gpio_table); gpiod_add_lookup_table(&h1940_audio_gpio_table); + gpiod_add_lookup_table(&h1940_bat_gpio_table); /* Configure the I2S pins (GPE0...GPE4) in correct mode */ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE); diff --git a/arch/arm/mach-s3c/mach-jive.c b/arch/arm/mach-s3c/mach-jive.c index 2a29c3eca559..0785638a9069 100644 --- a/arch/arm/mach-s3c/mach-jive.c +++ b/arch/arm/mach-s3c/mach-jive.c @@ -40,7 +40,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> -#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/nand-ecc-sw-hamming.h> #include <linux/mtd/partitions.h> #include "gpio-cfg.h" diff --git a/arch/arm/mach-s3c/mach-mini2440.c b/arch/arm/mach-s3c/mach-mini2440.c index dc22ab839b95..4100905dfbd0 100644 --- a/arch/arm/mach-s3c/mach-mini2440.c +++ b/arch/arm/mach-s3c/mach-mini2440.c @@ -44,7 +44,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> -#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/nand-ecc-sw-hamming.h> #include <linux/mtd/partitions.h> #include "gpio-cfg.h" diff --git a/arch/arm/mach-s3c/mach-osiris.c b/arch/arm/mach-s3c/mach-osiris.c index 81744ca67d1d..3aefb9d22340 100644 --- a/arch/arm/mach-s3c/mach-osiris.c +++ b/arch/arm/mach-s3c/mach-osiris.c @@ -33,7 +33,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> -#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/nand-ecc-sw-hamming.h> #include <linux/mtd/partitions.h> #include "cpu.h" diff --git a/arch/arm/mach-s3c/mach-qt2410.c b/arch/arm/mach-s3c/mach-qt2410.c index 151e8e373d40..f88b961798fd 100644 --- a/arch/arm/mach-s3c/mach-qt2410.c +++ b/arch/arm/mach-s3c/mach-qt2410.c @@ -21,7 +21,7 @@ #include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> -#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/nand-ecc-sw-hamming.h> #include <linux/mtd/partitions.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c index b9758f0a9a14..6e19add158a9 100644 --- a/arch/arm/mach-s3c/mach-rx1950.c +++ b/arch/arm/mach-s3c/mach-rx1950.c @@ -206,6 +206,15 @@ static const struct s3c_adc_bat_thresh bat_lut_acin[] = { { .volt = 3820, .cur = 0, .level = 0}, }; +static struct gpiod_lookup_table rx1950_bat_gpio_table = { + .dev_id = "s3c-adc-battery", + .table = { + /* Charge status S3C2410_GPF(3) */ + GPIO_LOOKUP("GPIOF", 3, "charge-status", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static int rx1950_bat_init(void) { int ret; @@ -331,7 +340,6 @@ static struct s3c_adc_bat_pdata rx1950_bat_cfg = { .exit = rx1950_bat_exit, .enable_charger = rx1950_enable_charger, .disable_charger = rx1950_disable_charger, - .gpio_charge_finished = S3C2410_GPF(3), .lut_noac = bat_lut_noac, .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac), .lut_acin = bat_lut_acin, @@ -840,6 +848,7 @@ static void __init rx1950_init_machine(void) pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup)); gpiod_add_lookup_table(&rx1950_audio_gpio_table); + gpiod_add_lookup_table(&rx1950_bat_gpio_table); /* Configure the I2S pins (GPE0...GPE4) in correct mode */ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE); diff --git a/arch/arm/mach-s3c/mach-rx3715.c b/arch/arm/mach-s3c/mach-rx3715.c index a03662a47b38..9fd2d9dc3689 100644 --- a/arch/arm/mach-s3c/mach-rx3715.c +++ b/arch/arm/mach-s3c/mach-rx3715.c @@ -22,7 +22,7 @@ #include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> -#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/nand-ecc-sw-hamming.h> #include <linux/mtd/partitions.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-s3c/mach-vstms.c b/arch/arm/mach-s3c/mach-vstms.c index 05f19f5ffabb..ec024af7b0ce 100644 --- a/arch/arm/mach-s3c/mach-vstms.c +++ b/arch/arm/mach-s3c/mach-vstms.c @@ -16,7 +16,7 @@ #include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> -#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/nand-ecc-sw-hamming.h> #include <linux/mtd/partitions.h> #include <linux/memblock.h> diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 95d4e8284866..d644b45bc29d 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -8,7 +8,6 @@ config ARCH_S5PV210 bool "Samsung S5PV210/S5PC110" depends on ARCH_MULTI_V7 - select ARCH_HAS_HOLES_MEMORYMODEL select ARM_VIC select CLKSRC_SAMSUNG_PWM select COMMON_CLK_SAMSUNG diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index bd3a52fd09ce..d4e89a02c8c8 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -98,6 +98,26 @@ static struct mcp_plat_data collie_mcp_data = { .codec_pdata = &collie_ucb1x00_data, }; +/* Battery management GPIOs */ +static struct gpiod_lookup_table collie_battery_gpiod_table = { + /* the MCP codec mcp0 has the ucb1x00 as attached device */ + .dev_id = "ucb1x00", + .table = { + /* This is found on the main GPIO on the SA1100 */ + GPIO_LOOKUP("gpio", COLLIE_GPIO_CO, + "main battery full", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio", COLLIE_GPIO_MAIN_BAT_LOW, + "main battery low", GPIO_ACTIVE_HIGH), + /* + * This is GPIO 0 on the Scoop expander, which is registered + * from common/scoop.c with this gpio chip label. + */ + GPIO_LOOKUP("sharp-scoop", 0, + "main charge on", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static int collie_ir_startup(struct device *dev) { int rc = gpio_request(COLLIE_GPIO_IR_ON, "IrDA"); @@ -395,6 +415,7 @@ static void __init collie_init(void) platform_scoop_config = &collie_pcmcia_config; gpiod_add_lookup_table(&collie_power_gpiod_table); + gpiod_add_lookup_table(&collie_battery_gpiod_table); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) { diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c index fcfcef1d1ae4..3849f71e6e12 100644 --- a/arch/arm/mach-shmobile/platsmp-scu.c +++ b/arch/arm/mach-shmobile/platsmp-scu.c @@ -64,7 +64,7 @@ static int shmobile_smp_scu_psr_core_disabled(int cpu) { unsigned long mask = SCU_PM_POWEROFF << (cpu * 8); - if ((__raw_readl(shmobile_scu_base + 8) & mask) == mask) + if ((readl(shmobile_scu_base + 8) & mask) == mask) return 1; return 0; diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 2bc93f391bcf..02cda9cada4c 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -14,6 +14,8 @@ #include "common.h" +#define HPBREG_BASE 0xfe700000 + #define INT2SMSKCR0 0x82288 /* 0xfe782288 */ #define INT2SMSKCR1 0x8228c /* 0xfe78228c */ @@ -22,19 +24,19 @@ static void __init r8a7778_init_irq_dt(void) { - void __iomem *base = ioremap(0xfe700000, 0x00100000); + void __iomem *base = ioremap(HPBREG_BASE, 0x00100000); BUG_ON(!base); irqchip_init(); /* route all interrupts to ARM */ - __raw_writel(0x73ffffff, base + INT2NTSR0); - __raw_writel(0xffffffff, base + INT2NTSR1); + writel(0x73ffffff, base + INT2NTSR0); + writel(0xffffffff, base + INT2NTSR1); /* unmask all known interrupts in INTCS2 */ - __raw_writel(0x08330773, base + INT2SMSKCR0); - __raw_writel(0x00311110, base + INT2SMSKCR1); + writel(0x08330773, base + INT2SMSKCR0); + writel(0x00311110, base + INT2SMSKCR1); iounmap(base); } diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 86406e3f9b22..b6e282116d66 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -15,53 +15,36 @@ #include "common.h" #include "r8a7779.h" -static struct map_desc r8a7779_io_desc[] __initdata = { - /* 2M identity mapping for 0xf0000000 (MPCORE) */ - { - .virtual = 0xf0000000, - .pfn = __phys_to_pfn(0xf0000000), - .length = SZ_2M, - .type = MT_DEVICE_NONSHARED - }, - /* 16M identity mapping for 0xfexxxxxx (DMAC-S/HPBREG/INTC2/LRAM/DBSC) */ - { - .virtual = 0xfe000000, - .pfn = __phys_to_pfn(0xfe000000), - .length = SZ_16M, - .type = MT_DEVICE_NONSHARED - }, -}; - -static void __init r8a7779_map_io(void) -{ - debug_ll_io_init(); - iotable_init(r8a7779_io_desc, ARRAY_SIZE(r8a7779_io_desc)); -} +#define HPBREG_BASE 0xfe700000 /* IRQ */ -#define INT2SMSKCR0 IOMEM(0xfe7822a0) -#define INT2SMSKCR1 IOMEM(0xfe7822a4) -#define INT2SMSKCR2 IOMEM(0xfe7822a8) -#define INT2SMSKCR3 IOMEM(0xfe7822ac) -#define INT2SMSKCR4 IOMEM(0xfe7822b0) +#define INT2SMSKCR0 0x822a0 /* Interrupt Submask Clear Register 0 */ +#define INT2SMSKCR1 0x822a4 /* Interrupt Submask Clear Register 1 */ +#define INT2SMSKCR2 0x822a8 /* Interrupt Submask Clear Register 2 */ +#define INT2SMSKCR3 0x822ac /* Interrupt Submask Clear Register 3 */ +#define INT2SMSKCR4 0x822b0 /* Interrupt Submask Clear Register 4 */ -#define INT2NTSR0 IOMEM(0xfe700060) -#define INT2NTSR1 IOMEM(0xfe700064) +#define INT2NTSR0 0x00060 /* Interrupt Notification Select Register 0 */ +#define INT2NTSR1 0x00064 /* Interrupt Notification Select Register 1 */ static void __init r8a7779_init_irq_dt(void) { + void __iomem *base = ioremap(HPBREG_BASE, 0x00100000); + irqchip_init(); /* route all interrupts to ARM */ - __raw_writel(0xffffffff, INT2NTSR0); - __raw_writel(0x3fffffff, INT2NTSR1); + writel(0xffffffff, base + INT2NTSR0); + writel(0x3fffffff, base + INT2NTSR1); /* unmask all known interrupts in INTCS2 */ - __raw_writel(0xfffffff0, INT2SMSKCR0); - __raw_writel(0xfff7ffff, INT2SMSKCR1); - __raw_writel(0xfffbffdf, INT2SMSKCR2); - __raw_writel(0xbffffffc, INT2SMSKCR3); - __raw_writel(0x003fee3f, INT2SMSKCR4); + writel(0xfffffff0, base + INT2SMSKCR0); + writel(0xfff7ffff, base + INT2SMSKCR1); + writel(0xfffbffdf, base + INT2SMSKCR2); + writel(0xbffffffc, base + INT2SMSKCR3); + writel(0x003fee3f, base + INT2SMSKCR4); + + iounmap(base); } static const char *const r8a7779_compat_dt[] __initconst = { @@ -71,7 +54,6 @@ static const char *const r8a7779_compat_dt[] __initconst = { DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)") .smp = smp_ops(r8a7779_smp_ops), - .map_io = r8a7779_map_io, .init_irq = r8a7779_init_irq_dt, .init_late = shmobile_init_late, .dt_compat = r8a7779_compat_dt, diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index eb4a62fa4289..890bf537b7de 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -22,29 +22,11 @@ #include "common.h" #include "sh73a0.h" -static struct map_desc sh73a0_io_desc[] __initdata = { - /* create a 1:1 identity mapping for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -static void __init sh73a0_map_io(void) -{ - debug_ll_io_init(); - iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc)); -} - static void __init sh73a0_generic_init(void) { #ifdef CONFIG_CACHE_L2X0 /* Shared attribute override enable, 64K*8way */ - l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff); + l2x0_init(ioremap(0xf0100000, PAGE_SIZE), 0x00400000, 0xc20f0fff); #endif } @@ -55,7 +37,6 @@ static const char *const sh73a0_boards_compat_dt[] __initconst = { DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)") .smp = smp_ops(sh73a0_smp_ops), - .map_io = sh73a0_map_io, .init_machine = sh73a0_generic_init, .init_late = shmobile_init_late, .dt_compat = sh73a0_boards_compat_dt, diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 0ed73b650c14..1bc609986c16 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -20,8 +20,10 @@ #include "common.h" #include "r8a7779.h" -#define AVECR IOMEM(0xfe700040) -#define R8A7779_SCU_BASE 0xf0000000 +#define HPBREG_BASE 0xfe700000 +#define AVECR 0x0040 /* ARM Reset Vector Address Register */ + +#define R8A7779_SCU_BASE 0xf0000000 static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) { @@ -36,11 +38,15 @@ static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus) { + void __iomem *base = ioremap(HPBREG_BASE, 0x1000); + /* Map the reset vector (in headsmp-scu.S, headsmp.S) */ - __raw_writel(__pa(shmobile_boot_vector), AVECR); + writel(__pa(shmobile_boot_vector), base + AVECR); /* setup r8a7779 specific SCU bits */ shmobile_smp_scu_prepare_cpus(R8A7779_SCU_BASE, max_cpus); + + iounmap(base); } #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 0403aa8629dd..453d48865029 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -16,31 +16,42 @@ #include "common.h" #include "sh73a0.h" -#define WUPCR IOMEM(0xe6151010) -#define SRESCR IOMEM(0xe6151018) -#define PSTR IOMEM(0xe6151040) -#define SBAR IOMEM(0xe6180020) -#define APARMBAREA IOMEM(0xe6f10020) +#define CPG_BASE2 0xe6151000 +#define WUPCR 0x10 /* System-CPU Wake Up Control Register */ +#define SRESCR 0x18 /* System-CPU Software Reset Control Register */ +#define PSTR 0x40 /* System-CPU Power Status Register */ + +#define SYSC_BASE 0xe6180000 +#define SBAR 0x20 /* SYS Boot Address Register */ + +#define AP_BASE 0xe6f10000 +#define APARMBAREA 0x20 /* Address Translation Area Register */ #define SH73A0_SCU_BASE 0xf0000000 static int sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned int lcpu = cpu_logical_map(cpu); + void __iomem *cpg2 = ioremap(CPG_BASE2, PAGE_SIZE); - if (((__raw_readl(PSTR) >> (4 * lcpu)) & 3) == 3) - __raw_writel(1 << lcpu, WUPCR); /* wake up */ + if (((readl(cpg2 + PSTR) >> (4 * lcpu)) & 3) == 3) + writel(1 << lcpu, cpg2 + WUPCR); /* wake up */ else - __raw_writel(1 << lcpu, SRESCR); /* reset */ - + writel(1 << lcpu, cpg2 + SRESCR); /* reset */ + iounmap(cpg2); return 0; } static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus) { + void __iomem *ap = ioremap(AP_BASE, PAGE_SIZE); + void __iomem *sysc = ioremap(SYSC_BASE, PAGE_SIZE); + /* Map the reset vector (in headsmp.S) */ - __raw_writel(0, APARMBAREA); /* 4k */ - __raw_writel(__pa(shmobile_boot_vector), SBAR); + writel(0, ap + APARMBAREA); /* 4k */ + writel(__pa(shmobile_boot_vector), sysc + SBAR); + iounmap(sysc); + iounmap(ap); /* setup sh73a0 specific SCU bits */ shmobile_smp_scu_prepare_cpus(SH73A0_SCU_BASE, max_cpus); diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 06da2747a90b..19635721013d 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -66,6 +66,7 @@ static const char * const sun8i_board_dt_compat[] = { "allwinner,sun8i-h2-plus", "allwinner,sun8i-h3", "allwinner,sun8i-r40", + "allwinner,sun8i-v3", "allwinner,sun8i-v3s", NULL, }; diff --git a/arch/arm/mach-tango/Kconfig b/arch/arm/mach-tango/Kconfig index 25b2fd434861..a9eeda36aeb1 100644 --- a/arch/arm/mach-tango/Kconfig +++ b/arch/arm/mach-tango/Kconfig @@ -3,7 +3,6 @@ config ARCH_TANGO bool "Sigma Designs Tango4 (SMP87xx)" depends on ARCH_MULTI_V7 # Cortex-A9 MPCore r3p0, PL310 r3p2 - select ARCH_HAS_HOLES_MEMORYMODEL select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 4536159bc8fa..3510503bc5e6 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -21,7 +21,6 @@ KASAN_SANITIZE_physaddr.o := n obj-$(CONFIG_DEBUG_VIRTUAL) += physaddr.o obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o -obj-$(CONFIG_HIGHMEM) += highmem.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_ARM_PV_FIXUP) += pv-fixup-asm.o diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c deleted file mode 100644 index 187fab227b50..000000000000 --- a/arch/arm/mm/highmem.c +++ /dev/null @@ -1,121 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mm/highmem.c -- ARM highmem support - * - * Author: Nicolas Pitre - * Created: september 8, 2008 - * Copyright: Marvell Semiconductors Inc. - */ - -#include <linux/module.h> -#include <linux/highmem.h> -#include <linux/interrupt.h> -#include <asm/fixmap.h> -#include <asm/cacheflush.h> -#include <asm/tlbflush.h> -#include "mm.h" - -static inline void set_fixmap_pte(int idx, pte_t pte) -{ - unsigned long vaddr = __fix_to_virt(idx); - pte_t *ptep = virt_to_kpte(vaddr); - - set_pte_ext(ptep, pte, 0); - local_flush_tlb_kernel_page(vaddr); -} - -static inline pte_t get_fixmap_pte(unsigned long vaddr) -{ - pte_t *ptep = virt_to_kpte(vaddr); - - return *ptep; -} - -void *kmap_atomic_high_prot(struct page *page, pgprot_t prot) -{ - unsigned int idx; - unsigned long vaddr; - void *kmap; - int type; - -#ifdef CONFIG_DEBUG_HIGHMEM - /* - * There is no cache coherency issue when non VIVT, so force the - * dedicated kmap usage for better debugging purposes in that case. - */ - if (!cache_is_vivt()) - kmap = NULL; - else -#endif - kmap = kmap_high_get(page); - if (kmap) - return kmap; - - type = kmap_atomic_idx_push(); - - idx = FIX_KMAP_BEGIN + type + KM_TYPE_NR * smp_processor_id(); - vaddr = __fix_to_virt(idx); -#ifdef CONFIG_DEBUG_HIGHMEM - /* - * With debugging enabled, kunmap_atomic forces that entry to 0. - * Make sure it was indeed properly unmapped. - */ - BUG_ON(!pte_none(get_fixmap_pte(vaddr))); -#endif - /* - * When debugging is off, kunmap_atomic leaves the previous mapping - * in place, so the contained TLB flush ensures the TLB is updated - * with the new mapping. - */ - set_fixmap_pte(idx, mk_pte(page, prot)); - - return (void *)vaddr; -} -EXPORT_SYMBOL(kmap_atomic_high_prot); - -void kunmap_atomic_high(void *kvaddr) -{ - unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK; - int idx, type; - - if (kvaddr >= (void *)FIXADDR_START) { - type = kmap_atomic_idx(); - idx = FIX_KMAP_BEGIN + type + KM_TYPE_NR * smp_processor_id(); - - if (cache_is_vivt()) - __cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE); -#ifdef CONFIG_DEBUG_HIGHMEM - BUG_ON(vaddr != __fix_to_virt(idx)); - set_fixmap_pte(idx, __pte(0)); -#else - (void) idx; /* to kill a warning */ -#endif - kmap_atomic_idx_pop(); - } else if (vaddr >= PKMAP_ADDR(0) && vaddr < PKMAP_ADDR(LAST_PKMAP)) { - /* this address was obtained through kmap_high_get() */ - kunmap_high(pte_page(pkmap_page_table[PKMAP_NR(vaddr)])); - } -} -EXPORT_SYMBOL(kunmap_atomic_high); - -void *kmap_atomic_pfn(unsigned long pfn) -{ - unsigned long vaddr; - int idx, type; - struct page *page = pfn_to_page(pfn); - - preempt_disable(); - pagefault_disable(); - if (!PageHighMem(page)) - return page_address(page); - - type = kmap_atomic_idx_push(); - idx = FIX_KMAP_BEGIN + type + KM_TYPE_NR * smp_processor_id(); - vaddr = __fix_to_virt(idx); -#ifdef CONFIG_DEBUG_HIGHMEM - BUG_ON(!pte_none(get_fixmap_pte(vaddr))); -#endif - set_fixmap_pte(idx, pfn_pte(pfn, kmap_prot)); - - return (void *)vaddr; -} diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index a391804c7ce3..828a2561b229 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -266,83 +266,6 @@ static inline void poison_init_mem(void *s, size_t count) *p++ = 0xe7fddef0; } -static inline void __init -free_memmap(unsigned long start_pfn, unsigned long end_pfn) -{ - struct page *start_pg, *end_pg; - phys_addr_t pg, pgend; - - /* - * Convert start_pfn/end_pfn to a struct page pointer. - */ - start_pg = pfn_to_page(start_pfn - 1) + 1; - end_pg = pfn_to_page(end_pfn - 1) + 1; - - /* - * Convert to physical addresses, and - * round start upwards and end downwards. - */ - pg = PAGE_ALIGN(__pa(start_pg)); - pgend = __pa(end_pg) & PAGE_MASK; - - /* - * If there are free pages between these, - * free the section of the memmap array. - */ - if (pg < pgend) - memblock_free_early(pg, pgend - pg); -} - -/* - * The mem_map array can get very big. Free the unused area of the memory map. - */ -static void __init free_unused_memmap(void) -{ - unsigned long start, end, prev_end = 0; - int i; - - /* - * This relies on each bank being in address order. - * The banks are sorted previously in bootmem_init(). - */ - for_each_mem_pfn_range(i, MAX_NUMNODES, &start, &end, NULL) { -#ifdef CONFIG_SPARSEMEM - /* - * Take care not to free memmap entries that don't exist - * due to SPARSEMEM sections which aren't present. - */ - start = min(start, - ALIGN(prev_end, PAGES_PER_SECTION)); -#else - /* - * Align down here since the VM subsystem insists that the - * memmap entries are valid from the bank start aligned to - * MAX_ORDER_NR_PAGES. - */ - start = round_down(start, MAX_ORDER_NR_PAGES); -#endif - /* - * If we had a previous bank, and there is a space - * between the current bank and the previous, free it. - */ - if (prev_end && prev_end < start) - free_memmap(prev_end, start); - - /* - * Align up here since the VM subsystem insists that the - * memmap entries are valid from the bank end aligned to - * MAX_ORDER_NR_PAGES. - */ - prev_end = ALIGN(end, MAX_ORDER_NR_PAGES); - } - -#ifdef CONFIG_SPARSEMEM - if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION)) - free_memmap(prev_end, - ALIGN(prev_end, PAGES_PER_SECTION)); -#endif -} - static void __init free_highpages(void) { #ifdef CONFIG_HIGHMEM @@ -353,8 +276,8 @@ static void __init free_highpages(void) /* set highmem page free */ for_each_free_mem_range(i, NUMA_NO_NODE, MEMBLOCK_NONE, &range_start, &range_end, NULL) { - unsigned long start = PHYS_PFN(range_start); - unsigned long end = PHYS_PFN(range_end); + unsigned long start = PFN_UP(range_start); + unsigned long end = PFN_DOWN(range_end); /* Ignore complete lowmem entries */ if (end <= max_low) @@ -384,7 +307,6 @@ void __init mem_init(void) set_max_mapnr(pfn_to_page(max_pfn) - mem_map); /* this will put all unused low memory onto the freelists */ - free_unused_memmap(); memblock_free_all(); #ifdef CONFIG_SA1111 diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index b8d912ac9e61..a0f8a0ca0788 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -165,25 +165,3 @@ int valid_mmap_phys_addr_range(unsigned long pfn, size_t size) { return (pfn + (size >> PAGE_SHIFT)) <= (1 + (PHYS_MASK >> PAGE_SHIFT)); } - -#ifdef CONFIG_STRICT_DEVMEM - -#include <linux/ioport.h> - -/* - * devmem_is_allowed() checks to see if /dev/mem access to a certain - * address is valid. The argument is a physical page number. - * We mimic x86 here by disallowing access to system RAM as well as - * device-exclusive MMIO regions. This effectively disable read()/write() - * on /dev/mem. - */ -int devmem_is_allowed(unsigned long pfn) -{ - if (iomem_is_exclusive(pfn << PAGE_SHIFT)) - return 0; - if (!page_is_ram(pfn)) - return 1; - return 0; -} - -#endif diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl index d056a548358e..20e1170e2e0a 100644 --- a/arch/arm/tools/syscall.tbl +++ b/arch/arm/tools/syscall.tbl @@ -454,3 +454,4 @@ 438 common pidfd_getfd sys_pidfd_getfd 439 common faccessat2 sys_faccessat2 440 common process_madvise sys_process_madvise +441 common epoll_pwait2 sys_epoll_pwait2 |