diff options
Diffstat (limited to 'arch/arm')
55 files changed, 325 insertions, 269 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index db857d07114f..1fc32b611f8a 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -307,13 +307,15 @@ endif ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y) prepare: stack_protector_prepare stack_protector_prepare: prepare0 - $(eval KBUILD_CFLAGS += \ + $(eval SSP_PLUGIN_CFLAGS := \ -fplugin-arg-arm_ssp_per_task_plugin-tso=$(shell \ awk '{if ($$2 == "THREAD_SZ_ORDER") print $$3;}'\ include/generated/asm-offsets.h) \ -fplugin-arg-arm_ssp_per_task_plugin-offset=$(shell \ awk '{if ($$2 == "TI_STACK_CANARY") print $$3;}'\ include/generated/asm-offsets.h)) + $(eval KBUILD_CFLAGS += $(SSP_PLUGIN_CFLAGS)) + $(eval GCC_PLUGINS_CFLAGS += $(SSP_PLUGIN_CFLAGS)) endif all: $(notdir $(KBUILD_IMAGE)) diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index da599c3a1193..9c11e7490292 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -101,7 +101,6 @@ clean-files += piggy_data lib1funcs.S ashldi3.S bswapsdi2.S \ $(libfdt) $(libfdt_hdrs) hyp-stub.S KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING -KBUILD_CFLAGS += $(DISABLE_ARM_SSP_PER_TASK_PLUGIN) ifeq ($(CONFIG_FUNCTION_TRACER),y) ORIG_CFLAGS := $(KBUILD_CFLAGS) @@ -117,7 +116,8 @@ CFLAGS_fdt_ro.o := $(nossp-flags-y) CFLAGS_fdt_rw.o := $(nossp-flags-y) CFLAGS_fdt_wip.o := $(nossp-flags-y) -ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin -I$(obj) +ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin \ + -I$(obj) $(DISABLE_ARM_SSP_PER_TASK_PLUGIN) asflags-y := -DZIMAGE # Supply kernel BSS size to the decompressor via a linker symbol. diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S index a5983588f96b..62286da318e7 100644 --- a/arch/arm/boot/compressed/efi-header.S +++ b/arch/arm/boot/compressed/efi-header.S @@ -60,7 +60,7 @@ optional_header: .long __pecoff_code_size @ SizeOfCode .long __pecoff_data_size @ SizeOfInitializedData .long 0 @ SizeOfUninitializedData - .long efi_stub_entry - start @ AddressOfEntryPoint + .long efi_entry - start @ AddressOfEntryPoint .long start_offset @ BaseOfCode .long __pecoff_data_start - start @ BaseOfData @@ -70,8 +70,8 @@ extra_header_fields: .long SZ_512 @ FileAlignment .short 0 @ MajorOsVersion .short 0 @ MinorOsVersion - .short 0 @ MajorImageVersion - .short 0 @ MinorImageVersion + .short LINUX_EFISTUB_MAJOR_VERSION @ MajorImageVersion + .short LINUX_EFISTUB_MINOR_VERSION @ MinorImageVersion .short 0 @ MajorSubsystemVersion .short 0 @ MinorSubsystemVersion .long 0 @ Win32VersionValue diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 088b0a060876..04f77214f050 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -1437,29 +1437,25 @@ __enter_kernel: reloc_code_end: #ifdef CONFIG_EFI_STUB - .align 2 -_start: .long start - . - -ENTRY(efi_stub_entry) - @ allocate space on stack for passing current zImage address - @ and for the EFI stub to return of new entry point of - @ zImage, as EFI stub may copy the kernel. Pointer address - @ is passed in r2. r0 and r1 are passed through from the - @ EFI firmware to efi_entry - adr ip, _start - ldr r3, [ip] - add r3, r3, ip - stmfd sp!, {r3, lr} - mov r2, sp @ pass zImage address in r2 - bl efi_entry - - @ Check for error return from EFI stub. r0 has FDT address - @ or error code. - cmn r0, #1 - beq efi_load_fail - - @ Preserve return value of efi_entry() in r4 - mov r4, r0 +ENTRY(efi_enter_kernel) + mov r7, r0 @ preserve image base + mov r4, r1 @ preserve DT pointer + + mov r0, r4 @ DT start + add r1, r4, r2 @ DT end + bl cache_clean_flush + + mov r0, r7 @ relocated zImage + ldr r1, =_edata @ size of zImage + add r1, r1, r0 @ end of zImage + bl cache_clean_flush + + @ The PE/COFF loader might not have cleaned the code we are + @ running beyond the PoU, and so calling cache_off below from + @ inside the PE/COFF loader allocated region is unsafe unless + @ we explicitly clean it to the PoC. + adr r0, call_cache_fn @ region of code we will + adr r1, 0f @ run with MMU off bl cache_clean_flush bl cache_off @@ -1469,18 +1465,10 @@ ENTRY(efi_stub_entry) mov r0, #0 mov r1, #0xFFFFFFFF mov r2, r4 - - @ Branch to (possibly) relocated zImage that is in [sp] - ldr lr, [sp] - ldr ip, =start_offset - add lr, lr, ip - mov pc, lr @ no mode switch - -efi_load_fail: - @ Return EFI_LOAD_ERROR to EFI firmware on error. - ldr r0, =0x80000001 - ldmfd sp!, {ip, pc} -ENDPROC(efi_stub_entry) + add r7, r7, #(__efi_start - start) + mov pc, r7 @ no mode switch +ENDPROC(efi_enter_kernel) +0: #endif .align diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index f3ced6df0c9b..9f66f96d09c9 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -526,11 +526,11 @@ * Supply voltage supervisor on board will not allow opp50 so * disable it and set opp100 as suspend OPP. */ - opp50@300000000 { + opp50-300000000 { status = "disabled"; }; - opp100@600000000 { + opp100-600000000 { opp-suspend; }; }; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 807a0fc20670..8e04303e8514 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -164,6 +164,8 @@ reg = <0x1e6a0000 0x300>; interrupts = <5>; clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + aspeed,vhub-downstream-ports = <5>; + aspeed,vhub-generic-endpoints = <15>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2d_default>; status = "disabled"; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index ebec0fa8baa7..f12ec04d3cbc 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -195,6 +195,8 @@ reg = <0x1e6a0000 0x300>; interrupts = <5>; clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + aspeed,vhub-downstream-ports = <5>; + aspeed,vhub-generic-endpoints = <15>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2ad_default>; status = "disabled"; diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi index 045ce66ca876..7028e21bdd98 100644 --- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi +++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi @@ -1112,6 +1112,31 @@ groups = "UART9"; }; + pinctrl_usb2ah_default: usb2ah_default { + function = "USB2AH"; + groups = "USBA"; + }; + + pinctrl_usb2ad_default: usb2ad_default { + function = "USB2AD"; + groups = "USBA"; + }; + + pinctrl_usb2bh_default: usb2bh_default { + function = "USB2BH"; + groups = "USBB"; + }; + + pinctrl_usb2bd_default: usb2bd_default { + function = "USB2BD"; + groups = "USBB"; + }; + + pinctrl_usb11bhid_default: usb11bhid_default { + function = "USB11BHID"; + groups = "USBB"; + }; + pinctrl_vb_default: vb_default { function = "VB"; groups = "VB"; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 796976d275e1..0a29b3b57a9d 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -245,6 +245,51 @@ status = "disabled"; }; + ehci0: usb@1e6a1000 { + compatible = "aspeed,ast2600-ehci", "generic-ehci"; + reg = <0x1e6a1000 0x100>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ah_default>; + status = "disabled"; + }; + + ehci1: usb@1e6a3000 { + compatible = "aspeed,ast2600-ehci", "generic-ehci"; + reg = <0x1e6a3000 0x100>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2bh_default>; + status = "disabled"; + }; + + uhci: usb@1e6b0000 { + compatible = "aspeed,ast2600-uhci", "generic-uhci"; + reg = <0x1e6b0000 0x100>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #ports = <2>; + clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; + status = "disabled"; + /* + * No default pinmux, it will follow EHCI, use an + * explicit pinmux override if EHCI is not enabled. + */ + }; + + vhub: usb-vhub@1e6a0000 { + compatible = "aspeed,ast2600-usb-vhub"; + reg = <0x1e6a0000 0x350>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + aspeed,vhub-downstream-ports = <7>; + aspeed,vhub-generic-endpoints = <21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ad_default>; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index 1b5a835f66bd..efea891b1a76 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -21,6 +21,7 @@ aliases { ethernet0 = &genet; + pcie0 = &pcie0; }; leds { @@ -31,6 +32,8 @@ pwr { label = "PWR"; gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index b75af21069f9..4c3f606e5b8d 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -112,6 +112,7 @@ &sdhci { #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>; bus-width = <4>; mmc-pwrseq = <&wifi_pwrseq>; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 394c8a71b13b..fd2c766e0f71 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -15,6 +15,7 @@ firmware: firmware { compatible = "raspberrypi,bcm2835-firmware", "simple-bus"; mboxes = <&mailbox>; + dma-ranges; }; power: power { diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts index 66ab35eccba7..28be0332c1c8 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts @@ -26,6 +26,8 @@ pwr { label = "PWR"; gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; }; }; }; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts index 74ed6d047807..37343148643d 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts @@ -27,6 +27,8 @@ pwr { label = "PWR"; gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; }; }; diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index 3931fb068ff0..91d1018ab75f 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -24,12 +24,12 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; }; &cpsw_emac1 { phy-handle = <ðphy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; }; &davinci_mdio { diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts index 9e43d5ec0bb2..79ccdd4470f4 100644 --- a/arch/arm/boot/dts/dm8148-t410.dts +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -33,12 +33,12 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; }; &cpsw_emac1 { phy-handle = <ðphy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; }; &davinci_mdio { diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts index 861ab90a3f3a..c16e183822be 100644 --- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts +++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts @@ -24,12 +24,12 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; }; &cpsw_emac1 { phy-handle = <ðphy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; }; &davinci_mdio { diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index de7f85efaa51..af06a55d1c5c 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -61,10 +61,10 @@ regulator-max-microvolt = <1800000>; }; - evm_3v3: fixedregulator-evm3v3 { + vsys_3v3: fixedregulator-vsys3v3 { /* Output of Cntlr A of TPS43351-Q1 on dra7-evm */ compatible = "regulator-fixed"; - regulator-name = "evm_3v3"; + regulator-name = "vsys_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&evm_12v0>; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index fc418834890d..2119a78e9c15 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -3474,6 +3474,7 @@ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>; clock-names = "fck"; interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; }; }; @@ -3501,6 +3502,7 @@ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>; clock-names = "fck"; interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; }; }; @@ -3528,6 +3530,7 @@ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>; clock-names = "fck"; interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; }; }; @@ -3555,6 +3558,7 @@ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>; clock-names = "fck"; interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; }; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index d78b684e7fca..5f5ee16f07a3 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -148,6 +148,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0xc0000000>; + dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>; ti,hwmods = "l3_main_1", "l3_main_2"; reg = <0x0 0x44000000 0x0 0x1000000>, <0x0 0x45000000 0x0 0x1000>; @@ -184,6 +185,7 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x20013000 0x13000 0 0xffed000>; + dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; @@ -238,6 +240,7 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x30013000 0x13000 0 0xffed000>; + dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi index 2f7539afef2b..42b8a205b64f 100644 --- a/arch/arm/boot/dts/dra76x.dtsi +++ b/arch/arm/boot/dts/dra76x.dtsi @@ -128,3 +128,8 @@ &usb4_tm { status = "disabled"; }; + +&mmc3 { + /* dra76x is not affected by i887 */ + max-frequency = <96000000>; +}; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 55cef4cac5f1..dc0a93bccbf1 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -796,16 +796,6 @@ clock-div = <1>; }; - ipu1_gfclk_mux: ipu1_gfclk_mux@520 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>; - ti,bit-shift = <24>; - reg = <0x0520>; - assigned-clocks = <&ipu1_gfclk_mux>; - assigned-clock-parents = <&dpll_core_h22x2_ck>; - }; - dummy_ck: dummy_ck { #clock-cells = <0>; compatible = "fixed-clock"; @@ -1564,6 +1554,8 @@ compatible = "ti,clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; + assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>; + assigned-clock-parents = <&dpll_core_h22x2_ck>; }; ipu_clkctrl: ipu-clkctrl@50 { diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi index 31719c079d67..44f97546dd0a 100644 --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -33,7 +33,7 @@ }; }; - lcd_vdd3_reg: voltage-regulator-6 { + lcd_vdd3_reg: voltage-regulator-7 { compatible = "regulator-fixed"; regulator-name = "LCD_VDD_2.2V"; regulator-min-microvolt = <2200000>; @@ -42,7 +42,7 @@ enable-active-high; }; - ps_als_reg: voltage-regulator-7 { + ps_als_reg: voltage-regulator-8 { compatible = "regulator-fixed"; regulator-name = "LED_A_3.0V"; regulator-min-microvolt = <3000000>; diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts index 98cd1284cd90..4189e1fb204c 100644 --- a/arch/arm/boot/dts/exynos4412-n710x.dts +++ b/arch/arm/boot/dts/exynos4412-n710x.dts @@ -13,7 +13,7 @@ /* bootargs are passed in by bootloader */ - cam_vdda_reg: voltage-regulator-6 { + cam_vdda_reg: voltage-regulator-7 { compatible = "regulator-fixed"; regulator-name = "CAM_SENSOR_CORE_1.2V"; regulator-min-microvolt = <1200000>; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index cd075621de52..84fcc203a2e4 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -275,7 +275,7 @@ /* SRAM on Colibri nEXT_CS0 */ sram@0,0 { - compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; + compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram"; reg = <0 0 0x00010000>; #address-cells = <1>; #size-cells = <1>; @@ -286,7 +286,7 @@ /* SRAM on Colibri nEXT_CS1 */ sram@1,0 { - compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; + compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram"; reg = <1 0 0x00010000>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi index 978dc1c2ff1b..77d871340eb7 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi @@ -112,7 +112,7 @@ regulators { vdd_arm: buck1 { regulator-name = "vdd_arm"; - regulator-min-microvolt = <730000>; + regulator-min-microvolt = <925000>; regulator-max-microvolt = <1380000>; regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; regulator-always-on; @@ -120,7 +120,7 @@ vdd_soc: buck2 { regulator-name = "vdd_soc"; - regulator-min-microvolt = <730000>; + regulator-min-microvolt = <1150000>; regulator-max-microvolt = <1380000>; regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; regulator-always-on; @@ -192,7 +192,6 @@ pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <8>; non-removable; - vmmc-supply = <&vdd_emmc_1p8>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index d05be3f0e2a7..04717cf69db0 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -336,7 +336,6 @@ assigned-clock-rates = <400000000>; bus-width = <8>; fsl,tuning-step = <2>; - max-frequency = <100000000>; vmmc-supply = <®_module_3v3>; vqmmc-supply = <®_DCDC3>; non-removable; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 92f6d0c2a74f..4c22828df55f 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -44,7 +44,7 @@ opp-hz = /bits/ 64 <792000000>; opp-microvolt = <1000000>; clock-latency-ns = <150000>; - opp-supported-hw = <0xd>, <0xf>; + opp-supported-hw = <0xd>, <0x7>; opp-suspend; }; @@ -52,7 +52,7 @@ opp-hz = /bits/ 64 <996000000>; opp-microvolt = <1100000>; clock-latency-ns = <150000>; - opp-supported-hw = <0xc>, <0xf>; + opp-supported-hw = <0xc>, <0x7>; opp-suspend; }; @@ -60,7 +60,7 @@ opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1225000>; clock-latency-ns = <150000>; - opp-supported-hw = <0x8>, <0xf>; + opp-supported-hw = <0x8>, <0x3>; opp-suspend; }; }; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 0855b1fe98e0..760a68c163c8 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -747,7 +747,7 @@ }; mdio0: mdio@2d24000 { - compatible = "fsl,etsec2-mdio"; + compatible = "gianfar"; device_type = "mdio"; #address-cells = <1>; #size-cells = <0>; @@ -756,7 +756,7 @@ }; mdio1: mdio@2d64000 { - compatible = "fsl,etsec2-mdio"; + compatible = "gianfar"; device_type = "mdio"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index 85665506f4f8..9067e0ef4240 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -182,6 +182,14 @@ pwm-names = "enable", "direction"; direction-duty-cycle-ns = <10000000>; }; + + backlight: backlight { + compatible = "led-backlight"; + + leds = <&backlight_led>; + brightness-levels = <31 63 95 127 159 191 223 255>; + default-brightness-level = <6>; + }; }; &dss { @@ -205,6 +213,8 @@ vddi-supply = <&lcd_regulator>; reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ + backlight = <&backlight>; + width-mm = <50>; height-mm = <89>; @@ -393,12 +403,11 @@ ramp-up-us = <1024>; ramp-down-us = <8193>; - led@0 { + backlight_led: led@0 { reg = <0>; led-sources = <2>; ti,led-mode = <0>; label = ":backlight"; - linux,default-trigger = "backlight"; }; led@1 { @@ -420,7 +429,7 @@ reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */ /* gpio_183 with sys_nirq2 pad as wakeup */ - interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING>, + interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>, <&omap4_pmx_core 0x160>; interrupt-names = "irq", "wakeup"; wakeup-source; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index c3c6d7d04a76..4089d97405c9 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -854,34 +854,46 @@ compatible = "ti,omap2-onenand"; reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ + /* + * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported + * bootloader set values when booted with v5.1 + * (OneNAND Manufacturer: Samsung): + * + * cs0 GPMC_CS_CONFIG1: 0xfb001202 + * cs0 GPMC_CS_CONFIG2: 0x00111100 + * cs0 GPMC_CS_CONFIG3: 0x00020200 + * cs0 GPMC_CS_CONFIG4: 0x11001102 + * cs0 GPMC_CS_CONFIG5: 0x03101616 + * cs0 GPMC_CS_CONFIG6: 0x90060000 + */ gpmc,sync-read; gpmc,sync-write; gpmc,burst-length = <16>; gpmc,burst-read; gpmc,burst-wrap; gpmc,burst-write; - gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */ - gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */ + gpmc,device-width = <2>; + gpmc,mux-add-data = <2>; gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <87>; - gpmc,cs-wr-off-ns = <87>; + gpmc,cs-rd-off-ns = <102>; + gpmc,cs-wr-off-ns = <102>; gpmc,adv-on-ns = <0>; - gpmc,adv-rd-off-ns = <10>; - gpmc,adv-wr-off-ns = <10>; - gpmc,oe-on-ns = <15>; - gpmc,oe-off-ns = <87>; + gpmc,adv-rd-off-ns = <12>; + gpmc,adv-wr-off-ns = <12>; + gpmc,oe-on-ns = <12>; + gpmc,oe-off-ns = <102>; gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <87>; - gpmc,rd-cycle-ns = <112>; - gpmc,wr-cycle-ns = <112>; - gpmc,access-ns = <81>; - gpmc,page-burst-access-ns = <15>; + gpmc,we-off-ns = <102>; + gpmc,rd-cycle-ns = <132>; + gpmc,wr-cycle-ns = <132>; + gpmc,access-ns = <96>; + gpmc,page-burst-access-ns = <18>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,wait-monitoring-ns = <0>; - gpmc,clk-activation-ns = <5>; - gpmc,wr-data-mux-bus-ns = <30>; - gpmc,wr-access-ns = <81>; + gpmc,clk-activation-ns = <6>; + gpmc,wr-data-mux-bus-ns = <36>; + gpmc,wr-access-ns = <96>; gpmc,sync-clk-ps = <15000>; /* diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index d0ecf54d5a23..a7562d3deb1a 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -143,6 +143,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xc0000000>; + dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; reg = <0 0x44000000 0 0x2000>, <0 0x44800000 0 0x3000>, diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi index 9f6c2b660ed3..0755e5864c4a 100644 --- a/arch/arm/boot/dts/ox810se.dtsi +++ b/arch/arm/boot/dts/ox810se.dtsi @@ -323,8 +323,8 @@ interrupt-controller; reg = <0 0x200>; #interrupt-cells = <1>; - valid-mask = <0xFFFFFFFF>; - clear-mask = <0>; + valid-mask = <0xffffffff>; + clear-mask = <0xffffffff>; }; timer0: timer@200 { diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi index c9b327732063..90846a7655b4 100644 --- a/arch/arm/boot/dts/ox820.dtsi +++ b/arch/arm/boot/dts/ox820.dtsi @@ -240,8 +240,8 @@ reg = <0 0x200>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; - valid-mask = <0xFFFFFFFF>; - clear-mask = <0>; + valid-mask = <0xffffffff>; + clear-mask = <0xffffffff>; }; timer0: timer@200 { diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index beb9885e6ffc..c0999e27e9b1 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -377,7 +377,7 @@ }; sata: sata@fc600000 { - compatible = "renesas,sata-r8a7779", "renesas,rcar-sata"; + compatible = "renesas,sata-r8a7779"; reg = <0xfc600000 0x200000>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_SATA>; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 1532a0e59af4..a2c37adacf77 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -215,7 +215,7 @@ }; crypto: crypto-engine@1c15000 { - compatible = "allwinner,sun4i-a10-crypto"; + compatible = "allwinner,sun8i-a33-crypto"; reg = <0x01c15000 0x1000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 2fd31a0a0b34..e8b3669e0e5d 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -374,8 +374,8 @@ }; ®_dldo3 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-name = "vdd-csi"; }; @@ -498,7 +498,8 @@ }; &usbphy { - usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_id_det-gpios = <&pio 7 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_vmain>; usb2_vbus-supply = <®_vmain>; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 74ac7ee9383c..e7b9bef1be6b 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -1006,10 +1006,10 @@ reg = <0x01c30000 0x104>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; - resets = <&ccu CLK_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu RST_BUS_EMAC>; + clocks = <&ccu CLK_BUS_EMAC>; clock-names = "stmmaceth"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; status = "disabled"; mdio: mdio { diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index 8f09a24b36ec..a9d5d6ddbd71 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -181,6 +181,32 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; }; + spi0: spi@1c05000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c05000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@1c06000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c06000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + csi0: csi@1c09000 { compatible = "allwinner,sun8i-r40-csi0", "allwinner,sun7i-a20-csi0"; @@ -290,6 +316,29 @@ resets = <&ccu RST_BUS_CE>; }; + spi2: spi@1c17000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c17000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + ahci: sata@1c18000 { + compatible = "allwinner,sun8i-r40-ahci"; + reg = <0x01c18000 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>; + resets = <&ccu RST_BUS_SATA>; + reset-names = "ahci"; + status = "disabled"; + }; + ehci1: usb@1c19000 { compatible = "allwinner,sun8i-r40-ehci", "generic-ehci"; reg = <0x01c19000 0x100>; @@ -336,6 +385,19 @@ status = "disabled"; }; + spi3: spi@1c1f000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c1f000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + ccu: clock@1c20000 { compatible = "allwinner,sun8i-r40-ccu"; reg = <0x01c20000 0x400>; @@ -653,69 +715,6 @@ #size-cells = <0>; }; - spi0: spi@1c05000 { - compatible = "allwinner,sun8i-r40-spi", - "allwinner,sun8i-h3-spi"; - reg = <0x01c05000 0x1000>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; - clock-names = "ahb", "mod"; - resets = <&ccu RST_BUS_SPI0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@1c06000 { - compatible = "allwinner,sun8i-r40-spi", - "allwinner,sun8i-h3-spi"; - reg = <0x01c06000 0x1000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; - clock-names = "ahb", "mod"; - resets = <&ccu RST_BUS_SPI1>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi2: spi@1c07000 { - compatible = "allwinner,sun8i-r40-spi", - "allwinner,sun8i-h3-spi"; - reg = <0x01c07000 0x1000>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>; - clock-names = "ahb", "mod"; - resets = <&ccu RST_BUS_SPI2>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi3: spi@1c0f000 { - compatible = "allwinner,sun8i-r40-spi", - "allwinner,sun8i-h3-spi"; - reg = <0x01c0f000 0x1000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>; - clock-names = "ahb", "mod"; - resets = <&ccu RST_BUS_SPI3>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - ahci: sata@1c18000 { - compatible = "allwinner,sun8i-r40-ahci"; - reg = <0x01c18000 0x1000>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>; - resets = <&ccu RST_BUS_SATA>; - reset-names = "ahci"; - status = "disabled"; - - }; - gmac: ethernet@1c50000 { compatible = "allwinner,sun8i-r40-gmac"; syscon = <&ccu>; diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 947ef7981d92..c98ebae1aeac 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -302,10 +302,13 @@ static int sa1111_retrigger_irq(struct irq_data *d) break; } - if (i == 8) + if (i == 8) { pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n", d->irq); - return i == 8 ? -1 : 0; + return 0; + } + + return 1; } static int sa1111_type_irq(struct irq_data *d, unsigned int flags) diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 519ff58e67b3..0afcae9f7cf8 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -178,6 +178,7 @@ CONFIG_SCHED_TRACER=y CONFIG_STACK_TRACER=y CONFIG_FUNCTION_PROFILER=y CONFIG_TEST_KSTRTOX=y +CONFIG_DEBUG_FS=y CONFIG_KGDB=y CONFIG_KGDB_KDB=y CONFIG_STRICT_DEVMEM=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c32c338f7704..847f9874ccc4 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -375,6 +375,7 @@ CONFIG_BACKLIGHT_GENERIC=m CONFIG_BACKLIGHT_PWM=m CONFIG_BACKLIGHT_PANDORA=m CONFIG_BACKLIGHT_GPIO=m +CONFIG_BACKLIGHT_LED=m CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_LOGO=y diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index fe2e1e82e233..e73c97b0f5b0 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/socfpga_defconfig @@ -157,6 +157,7 @@ CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_SCHED_DEBUG is not set CONFIG_FUNCTION_TRACER=y diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h index f4fe4d02cef2..79fa327238e8 100644 --- a/arch/arm/include/asm/floppy.h +++ b/arch/arm/include/asm/floppy.h @@ -8,16 +8,18 @@ */ #ifndef __ASM_ARM_FLOPPY_H #define __ASM_ARM_FLOPPY_H -#if 0 -#include <mach/floppy.h> -#endif -#define fd_outb(val,port) \ - do { \ - if ((port) == (u32)FD_DOR) \ - fd_setdor((val)); \ - else \ - outb((val),(port)); \ +#define fd_outb(val,port) \ + do { \ + int new_val = (val); \ + if (((port) & 7) == FD_DOR) { \ + if (new_val & 0xf0) \ + new_val = (new_val & 0x0c) | \ + floppy_selects[new_val & 3]; \ + else \ + new_val &= 0x0c; \ + } \ + outb(new_val, (port)); \ } while(0) #define fd_inb(port) inb((port)) @@ -53,69 +55,7 @@ static inline int fd_dma_setup(void *data, unsigned int length, * to a non-zero track, and then restoring it to track 0. If an error occurs, * then there is no floppy drive present. [to be put back in again] */ -static unsigned char floppy_selects[2][4] = -{ - { 0x10, 0x21, 0x23, 0x33 }, - { 0x10, 0x21, 0x23, 0x33 } -}; - -#define fd_setdor(dor) \ -do { \ - int new_dor = (dor); \ - if (new_dor & 0xf0) \ - new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3]; \ - else \ - new_dor &= 0x0c; \ - outb(new_dor, FD_DOR); \ -} while (0) - -/* - * Someday, we'll automatically detect which drives are present... - */ -static inline void fd_scandrives (void) -{ -#if 0 - int floppy, drive_count; - - fd_disable_irq(); - raw_cmd = &default_raw_cmd; - raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK; - raw_cmd->track = 0; - raw_cmd->rate = ?; - drive_count = 0; - for (floppy = 0; floppy < 4; floppy ++) { - current_drive = drive_count; - /* - * Turn on floppy motor - */ - if (start_motor(redo_fd_request)) - continue; - /* - * Set up FDC - */ - fdc_specify(); - /* - * Tell FDC to recalibrate - */ - output_byte(FD_RECALIBRATE); - LAST_OUT(UNIT(floppy)); - /* wait for command to complete */ - if (!successful) { - int i; - for (i = drive_count; i < 3; i--) - floppy_selects[fdc][i] = floppy_selects[fdc][i + 1]; - floppy_selects[fdc][3] = 0; - floppy -= 1; - } else - drive_count++; - } -#else - floppy_selects[0][0] = 0x10; - floppy_selects[0][1] = 0x21; - floppy_selects[0][2] = 0x23; - floppy_selects[0][3] = 0x33; -#endif -} +static unsigned char floppy_selects[4] = { 0x10, 0x21, 0x23, 0x33 }; #define FDC1 (0x3f0) @@ -135,9 +75,7 @@ static inline void fd_scandrives (void) */ static void driveswap(int *ints, int dummy, int dummy2) { - floppy_selects[0][0] ^= floppy_selects[0][1]; - floppy_selects[0][1] ^= floppy_selects[0][0]; - floppy_selects[0][0] ^= floppy_selects[0][1]; + swap(floppy_selects[0], floppy_selects[1]); } #define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 } diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 83c391b597d4..e133da303a98 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -134,10 +134,12 @@ arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr) { int oldval = 0, ret, tmp; + if (!access_ok(uaddr, sizeof(u32))) + return -EFAULT; + #ifndef CONFIG_SMP preempt_disable(); #endif - pagefault_disable(); switch (op) { case FUTEX_OP_SET: @@ -159,7 +161,6 @@ arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr) ret = -ENOSYS; } - pagefault_enable(); #ifndef CONFIG_SMP preempt_enable(); #endif diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h index 8a0fae94d45e..435aba289fc5 100644 --- a/arch/arm/include/asm/topology.h +++ b/arch/arm/include/asm/topology.h @@ -16,6 +16,9 @@ /* Enable topology flag updates */ #define arch_update_cpu_topology topology_update_cpu_topology +/* Replace task scheduler's default thermal pressure retrieve API */ +#define arch_scale_thermal_pressure topology_get_thermal_pressure + #else static inline void init_cpu_topology(void) { } diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c index c89ac1b9d28b..e0330a25e1c6 100644 --- a/arch/arm/kernel/vdso.c +++ b/arch/arm/kernel/vdso.c @@ -95,6 +95,8 @@ static bool __init cntvct_functional(void) */ np = of_find_compatible_node(NULL, NULL, "arm,armv7-timer"); if (!np) + np = of_find_compatible_node(NULL, NULL, "arm,armv8-timer"); + if (!np) goto out_put; if (of_property_read_bool(np, "arm,cpu-registers-not-fw-configured")) diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S index 95b2e1ce559c..f8016e3db65d 100644 --- a/arch/arm/lib/copy_from_user.S +++ b/arch/arm/lib/copy_from_user.S @@ -118,7 +118,7 @@ ENTRY(arm_copy_from_user) ENDPROC(arm_copy_from_user) - .pushsection .fixup,"ax" + .pushsection .text.fixup,"ax" .align 0 copy_abort_preamble ldmfd sp!, {r1, r2, r3} diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 35ff620537e6..03506ce46149 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -91,6 +91,8 @@ AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o endif +AFLAGS_resume-imx6.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SOC_IMX6) += resume-imx6.o obj-$(CONFIG_SOC_IMX6) += pm-imx6.o obj-$(CONFIG_SOC_IMX1) += mach-imx1.o diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 912aeceb4ff8..5aa5796cff0e 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -109,17 +109,17 @@ void imx_cpu_die(unsigned int cpu); int imx_cpu_kill(unsigned int cpu); #ifdef CONFIG_SUSPEND -void v7_cpu_resume(void); void imx53_suspend(void __iomem *ocram_vbase); extern const u32 imx53_suspend_sz; void imx6_suspend(void __iomem *ocram_vbase); #else -static inline void v7_cpu_resume(void) {} static inline void imx53_suspend(void __iomem *ocram_vbase) {} static const u32 imx53_suspend_sz; static inline void imx6_suspend(void __iomem *ocram_vbase) {} #endif +void v7_cpu_resume(void); + void imx6_pm_ccm_init(const char *ccm_compat); void imx6q_pm_init(void); void imx6dl_pm_init(void); diff --git a/arch/arm/mach-imx/resume-imx6.S b/arch/arm/mach-imx/resume-imx6.S new file mode 100644 index 000000000000..5bd1ba7ef15b --- /dev/null +++ b/arch/arm/mach-imx/resume-imx6.S @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/asm-offsets.h> +#include <asm/hardware/cache-l2x0.h> +#include "hardware.h" + +/* + * The following code must assume it is running from physical address + * where absolute virtual addresses to the data section have to be + * turned into relative ones. + */ + +ENTRY(v7_cpu_resume) + bl v7_invalidate_l1 +#ifdef CONFIG_CACHE_L2X0 + bl l2c310_early_resume +#endif + b cpu_resume +ENDPROC(v7_cpu_resume) diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index 062391ff13da..1eabf2d2834b 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -327,17 +327,3 @@ resume: ret lr ENDPROC(imx6_suspend) - -/* - * The following code must assume it is running from physical address - * where absolute virtual addresses to the data section have to be - * turned into relative ones. - */ - -ENTRY(v7_cpu_resume) - bl v7_invalidate_l1 -#ifdef CONFIG_CACHE_L2X0 - bl l2c310_early_resume -#endif - b cpu_resume -ENDPROC(v7_cpu_resume) diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index 01f0f4b765e0..75034fe197e3 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -9,7 +9,6 @@ menuconfig ARCH_MESON select CACHE_L2X0 select PINCTRL select PINCTRL_MESON - select COMMON_CLK select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index e1135b9d67c6..5017a3be0ff0 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -16,7 +16,7 @@ hwmod-common = omap_hwmod.o omap_hwmod_reset.o \ clock-common = clock.o secure-common = omap-smc.o omap-secure.o -obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common) +obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_AM33XX) += $(hwmod-common) $(secure-common) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index f28047233665..27608d1026cb 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -431,7 +431,6 @@ void __init omap2420_init_early(void) omap_hwmod_init_postsetup(); omap_clk_soc_init = omap2420_dt_clk_init; rate_table = omap2420_rate_table; - omap_secure_init(); } void __init omap2420_init_late(void) @@ -456,7 +455,6 @@ void __init omap2430_init_early(void) omap_hwmod_init_postsetup(); omap_clk_soc_init = omap2430_dt_clk_init; rate_table = omap2430_rate_table; - omap_secure_init(); } void __init omap2430_init_late(void) |