diff options
Diffstat (limited to 'arch/arm')
421 files changed, 11531 insertions, 2426 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2bf1ce39a96d..33b00579beff 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -377,15 +377,6 @@ config ARCH_FOOTBRIDGE Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. -config ARCH_NETX - bool "Hilscher NetX based" - select ARM_VIC - select CLKSRC_MMIO - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - help - This enables support for systems based on the Hilscher NetX Soc - config ARCH_IOP13XX bool "IOP13xx-based" depends on MMU @@ -531,7 +522,7 @@ config ARCH_RPC select ARCH_ACORN select ARCH_MAY_HAVE_PC_FDC select ARCH_SPARSEMEM_ENABLE - select ARCH_USES_GETTIMEOFFSET + select ARM_HAS_SG_CHAIN select CPU_SA110 select FIQ select HAVE_IDE @@ -552,6 +543,7 @@ config ARCH_SA1100 select CLKSRC_MMIO select CLKSRC_PXA select TIMER_OF if OF + select COMMON_CLK select CPU_FREQ select CPU_SA1100 select GENERIC_CLOCKEVENTS @@ -770,8 +762,6 @@ source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/mach-mxs/Kconfig" -source "arch/arm/mach-netx/Kconfig" - source "arch/arm/mach-nomadik/Kconfig" source "arch/arm/mach-npcm/Kconfig" @@ -1297,7 +1287,7 @@ config SMP will run faster if you say N here. See also <file:Documentation/x86/i386/IO-APIC.rst>, - <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO available at + <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO available at <http://tldp.org/HOWTO/SMP-HOWTO.html>. If you don't know what to do here, say N. @@ -2036,7 +2026,7 @@ config CRASH_DUMP kdump/kexec. The crash dump kernel must be compiled to a memory address not used by the main kernel - For more details see Documentation/kdump/kdump.rst + For more details see Documentation/admin-guide/kdump/kdump.rst config AUTO_ZRELADDR bool "Auto calculation of the decompressed kernel image address" @@ -2142,7 +2132,7 @@ config VFP Say Y to include VFP support code in the kernel. This is needed if your hardware includes a VFP unit. - Please see <file:Documentation/arm/VFP/release-notes.txt> for + Please see <file:Documentation/arm/vfp/release-notes.rst> for release notes and additional status information. Say N if your target does not have VFP hardware. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 9a8862fee738..c929bea9a9ff 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -638,13 +638,6 @@ choice Say Y here if you want kernel low-level debugging support for Mediatek mt8135 based platforms on UART3. - config DEBUG_NETX_UART - bool "Kernel low-level debugging messages via NetX UART" - depends on ARCH_NETX - help - Say Y here if you want kernel low-level debugging support - on Hilscher NetX based platforms. - config DEBUG_NOMADIK_UART bool "Kernel low-level debugging messages via NOMADIK UART" depends on ARCH_NOMADIK diff --git a/arch/arm/Makefile b/arch/arm/Makefile index f863c6935d0e..c3624ca6c0bc 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -191,7 +191,6 @@ machine-$(CONFIG_ARCH_MXC) += imx machine-$(CONFIG_ARCH_MEDIATEK) += mediatek machine-$(CONFIG_ARCH_MILBEAUT) += milbeaut machine-$(CONFIG_ARCH_MXS) += mxs -machine-$(CONFIG_ARCH_NETX) += netx machine-$(CONFIG_ARCH_NOMADIK) += nomadik machine-$(CONFIG_ARCH_NPCM) += npcm machine-$(CONFIG_ARCH_NSPIRE) += nspire diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index dab2914fa293..9159fa2cea90 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -586,6 +586,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-colibri-emmc-eval-v3.dtb \ imx7d-colibri-eval-v3.dtb \ imx7d-mba7.dtb \ + imx7d-meerkat96.dtb \ imx7d-nitrogen7.dtb \ imx7d-pico-hobbit.dtb \ imx7d-pico-pi.dtb \ @@ -602,6 +603,7 @@ dtb-$(CONFIG_SOC_IMX7ULP) += \ dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ + ls1021a-tsn.dtb \ ls1021a-twr.dtb dtb-$(CONFIG_SOC_VF610) += \ vf500-colibri-eval-v3.dtb \ @@ -748,6 +750,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-pepper.dtb \ am335x-phycore-rdk.dtb \ am335x-pocketbeagle.dtb \ + am335x-regor-rdk.dtb \ am335x-sancloud-bbe.dtb \ am335x-shc.dtb \ am335x-sbc-t335.dtb \ @@ -975,6 +978,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32746g-eval.dtb \ stm32h743i-eval.dtb \ stm32h743i-disco.dtb \ + stm32mp157a-avenger96.dtb \ stm32mp157a-dk1.dtb \ stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ @@ -1268,10 +1272,16 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-facebook-cmm.dtb \ aspeed-bmc-facebook-tiogapass.dtb \ + aspeed-bmc-facebook-yamp.dtb \ aspeed-bmc-intel-s2600wf.dtb \ + aspeed-bmc-inspur-fp5280g2.dtb \ + aspeed-bmc-lenovo-hr630.dtb \ + aspeed-bmc-microsoft-olympus.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ + aspeed-bmc-opp-swift.dtb \ + aspeed-bmc-opp-vesnin.dtb \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ aspeed-bmc-portwell-neptune.dtb \ diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts index 49e46baf9542..386d5f89978e 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts @@ -30,6 +30,12 @@ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ >; }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7) /* MMC1 CD */ + >; + }; }; &uart1 { @@ -65,7 +71,13 @@ }; &cpsw_emac1 { - phy-mode = "rgmii-txid"; + phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; phy-handle = <&phy1>; }; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts index 9e88bc2f6465..b0df7256db13 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts @@ -51,6 +51,12 @@ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */ >; }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7) /* MMC1 CD */ + >; + }; }; &uart1 { @@ -107,7 +113,13 @@ }; &cpsw_emac1 { - phy-mode = "rgmii-txid"; + phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; phy-handle = <&phy1>; }; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index 28aa00422951..d6aa46e8700e 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -60,6 +60,11 @@ >; }; + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7) /* MMC1 CD */ + >; + }; }; &uart1 { @@ -125,7 +130,7 @@ }; &cpsw_emac1 { - phy-mode = "rgmii-txid"; + phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; phy-handle = <&phy1>; }; @@ -136,3 +141,9 @@ status = "okay"; }; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi index d774bf76720c..9bfa032bcada 100644 --- a/arch/arm/boot/dts/am335x-pcm-953.dtsi +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -36,15 +36,13 @@ pinctrl-names = "default"; pinctrl-0 = <&user_leds_pins>; - green { - label = "green:user"; + user-led0 { gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; linux,default-trigger = "gpio"; default-state = "on"; }; - yellow { - label = "yellow:user"; + user-led1 { gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; linux,default-trigger = "gpio"; default-state = "on"; @@ -135,22 +133,6 @@ &davinci_mdio { phy1: ethernet-phy@2 { reg = <2>; - - /* Register 260 (104h) – RGMII Clock and Control Pad Skew */ - rxc-skew-ps = <1400>; - rxdv-skew-ps = <0>; - txc-skew-ps = <1400>; - txen-skew-ps = <0>; - /* Register 261 (105h) – RGMII RX Data Pad Skew */ - rxd3-skew-ps = <0>; - rxd2-skew-ps = <0>; - rxd1-skew-ps = <0>; - rxd0-skew-ps = <0>; - /* Register 262 (106h) – RGMII TX Data Pad Skew */ - txd3-skew-ps = <0>; - txd2-skew-ps = <0>; - txd1-skew-ps = <0>; - txd0-skew-ps = <0>; }; }; diff --git a/arch/arm/boot/dts/am335x-phycore-rdk.dts b/arch/arm/boot/dts/am335x-phycore-rdk.dts index 672daf9d36be..43907d03e675 100644 --- a/arch/arm/boot/dts/am335x-phycore-rdk.dts +++ b/arch/arm/boot/dts/am335x-phycore-rdk.dts @@ -10,6 +10,10 @@ #include "am335x-pcm-953.dtsi" /* SoM */ +&gpmc { + status = "okay"; +}; + &i2c_eeprom { status = "okay"; }; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index ee6b1cb27ce5..3d0672b53d77 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -27,17 +27,13 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - regulators { - compatible = "simple-bus"; - - vcc5v: fixedregulator0 { - compatible = "regulator-fixed"; - regulator-name = "vcc5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - regulator-always-on; - }; + vcc5v: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; }; }; @@ -50,6 +46,33 @@ status = "okay"; }; +/* EMMC */ +&am33xx_pinmux { + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + vmmc-supply = <&vmmc_reg>; + bus-width = <8>; + ti,non-removable; + status = "disabled"; +}; + /* Ethernet */ &am33xx_pinmux { ethernet0_pins: pinmux_ethernet0 { @@ -164,7 +187,7 @@ }; &gpmc { - status = "okay"; + status = "disabled"; pinctrl-names = "default"; pinctrl-0 = <&nandflash_pins>; ranges = <0 0 0x08000000 0x1000000>; /* CS0: NAND */ diff --git a/arch/arm/boot/dts/am335x-regor-rdk.dts b/arch/arm/boot/dts/am335x-regor-rdk.dts new file mode 100644 index 000000000000..66a1360b83d5 --- /dev/null +++ b/arch/arm/boot/dts/am335x-regor-rdk.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Phytec Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + * + */ + +/dts-v1/; + +#include "am335x-phycore-som.dtsi" +#include "am335x-regor.dtsi" + +/* SoM */ +&gpmc { + status = "okay"; +}; + +&i2c_eeprom { + status = "okay"; +}; + +&serial_flash { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi new file mode 100644 index 000000000000..5aff02a95766 --- /dev/null +++ b/arch/arm/boot/dts/am335x-regor.dtsi @@ -0,0 +1,223 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Phytec Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + * + */ + +/ { + model = "Phytec AM335x phyBOARD-REGOR"; + compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx"; + + vcc3v3: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + /* User IO */ + user_leds: user_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_pins>; + + run_stop-led { + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "off"; + }; + + error-led { + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "off"; + }; + }; +}; + +/* User Leds */ +&am33xx_pinmux { + user_leds_pins: pinmux_user_leds { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2_22 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mcasp0_fsx.gpio3_15 */ + >; + }; +}; + +/* CAN Busses */ +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ + >; + }; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + status = "okay"; +}; + +/* Ethernet */ +&am33xx_pinmux { + ethernet1_pins: pinmux_ethernet1 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1) /* gpmc_a2.mii2_txd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1) /* gpmc_a3.mii2_txd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1) /* gpmc_a4.mii2_txd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1) /* gpmc_a5.mii2_txd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a6.mii2_txclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a7.mii2_rxclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a8.mii2_rxd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a9.mii2_rxd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a10.mii2_rxd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a11.mii2_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_wpn.mii2_rxerr */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_ben1.mii2_col */ + >; + }; +}; + +&cpsw_emac1 { + phy-handle = <&phy1>; + phy-mode = "mii"; + dual_emac_res_vlan = <2>; +}; + +&davinci_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mac { + slaves = <2>; + pinctrl-names = "default"; + pinctrl-0 = <ðernet0_pins ðernet1_pins>; + dual_emac = <1>; +}; + +/* GPIOs */ +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&user_gpios_pins>; + + user_gpios_pins: pinmux_user_gpios { + pinctrl-single,pins = < + /* DIGIN 1-4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7) /* gpmc_ad11.gpio0_27 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT, MUX_MODE7) /* gpmc_ad10.gpio0_26 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT, MUX_MODE7) /* gpmc_ad9.gpio0_23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT, MUX_MODE7) /* gpmc_ad8.gpio0_22 */ + /* DIGOUT 1-4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad15.gpio1_15 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad14.gpio1_14 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad13.gpio1_13 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad12.gpio1_12 */ + >; + }; +}; + +/* MMC */ +&am33xx_pinmux { + mmc1_pins: pinmux_mmc1 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ + >; + }; +}; + +&mmc1 { + vmmc-supply = <&vcc3v3>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* RTC */ +&i2c_rtc { + status = "okay"; +}; + +/* UARTs */ +&am33xx_pinmux { + uart0_pins: pinmux_uart0 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + >; + }; + + uart2_pins: pinmux_uart2 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +/* RS485 - UART1 */ +&am33xx_pinmux { + uart1_rs485_pins: pinmux_uart1_rs485_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLUP, MUX_MODE0) + >; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_rs485_pins>; + status = "okay"; + linux,rs485-enabled-at-boot-time; +}; + +/* USB */ +&cppi41dma { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-wega-rdk.dts b/arch/arm/boot/dts/am335x-wega-rdk.dts index 2e04f6df8257..866b5f0cbfbc 100644 --- a/arch/arm/boot/dts/am335x-wega-rdk.dts +++ b/arch/arm/boot/dts/am335x-wega-rdk.dts @@ -10,6 +10,10 @@ #include "am335x-wega.dtsi" /* SoM */ +&gpmc { + status = "okay"; +}; + &i2c_eeprom { status = "okay"; }; diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index 67bde56f89fd..61fc4cd2d164 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -12,16 +12,12 @@ compatible = "ti,da830-evm-audio"; }; - regulators { - compatible = "simple-bus"; - - vcc3v3: fixedregulator1 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; + vcc3v3: fixedregulator1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; }; }; diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi index 610506723ea5..fe0207b88053 100644 --- a/arch/arm/boot/dts/arm-realview-eb.dtsi +++ b/arch/arm/boot/dts/arm-realview-eb.dtsi @@ -119,6 +119,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x40000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; flash1@44000000 { @@ -126,6 +129,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x44000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; /* SMSC LAN91C111 ethernet with PHY and EEPROM */ diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index cbbb8878daa3..2625ce66f8e7 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -120,12 +120,18 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x30000000 0x4000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; fpga_flash@38000000 { compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x38000000 0x800000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; /* diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts index 2015619ca22c..c69cf7ddbe61 100644 --- a/arch/arm/boot/dts/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts @@ -235,6 +235,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x40000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; flash1@44000000 { @@ -242,6 +245,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x44000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; bridge { diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi index a81e9c282432..09f3f544f3a7 100644 --- a/arch/arm/boot/dts/arm-realview-pbx.dtsi +++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -134,6 +134,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x40000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; flash1@44000000 { @@ -141,6 +144,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x44000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; /* SMSC 9118 ethernet with PHY and EEPROM */ diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 9fd1cb9f4992..85e2e9e27a9f 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -143,6 +143,20 @@ }; }; + auxdisplay { + compatible = "hit,hd44780"; + data-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>, + <&gpio1 26 GPIO_ACTIVE_HIGH>, + <&gpio1 27 GPIO_ACTIVE_HIGH>, + <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + rs-gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + rw-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + backlight-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + display-height-chars = <2>; + display-width-chars = <16>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&backup_button_pin diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts index 43aba4071a5c..d519d307aa2a 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts @@ -372,3 +372,11 @@ &adc { status = "okay"; }; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts new file mode 100644 index 000000000000..4e09a9cf32b7 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2018 Facebook Inc. +/dts-v1/; + +#include "aspeed-g5.dtsi" + +/ { + model = "Facebook YAMP 100 BMC"; + compatible = "facebook,yamp-bmc", "aspeed,ast2500"; + + aliases { + /* + * Override the default uart aliases to avoid breaking + * the legacy applications. + */ + serial0 = &uart5; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS0,9600n8 root=/dev/ram rw"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +/* + * Update reset type to "system" (full chip) to fix warm reboot hang issue + * when reset type is set to default ("soc", gated by reset mask registers). + */ +&wdt1 { + status = "okay"; + aspeed,reset-type = "system"; +}; + +/* + * wdt2 is not used by Yamp. + */ +&wdt2 { + status = "disabled"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "facebook-bmc-flash-layout.dtsi" + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + use-ncsi; + no-hw-checksum; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + i2c-switch@75 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts new file mode 100644 index 000000000000..628195b66d46 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts @@ -0,0 +1,846 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "FP5280G2 BMC"; + compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + coldfire_memory: codefire_memory@9ef00000 { + reg = <0x9ef00000 0x00100000>; + no-map; + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + fsi: gpio-fsi { + compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + memory-region = <&coldfire_memory>; + aspeed,sram = <&sram>; + aspeed,cvic = <&cvic>; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(B, 3)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(F, 0)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(F, 1)>; + }; + + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca1 0 GPIO_ACTIVE_LOW>; + linux,code = <1>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca1 1 GPIO_ACTIVE_LOW>; + linux,code = <2>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca1 2 GPIO_ACTIVE_LOW>; + linux,code = <3>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca1 3 GPIO_ACTIVE_LOW>; + linux,code = <4>; + }; + + fan4-presence { + label = "fan4-presence"; + gpios = <&pca1 4 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan5-presence { + label = "fan5-presence"; + gpios = <&pca1 5 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan6-presence { + label = "fan6-presence"; + gpios = <&pca1 6 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + fan7-presence { + label = "fan7-presence"; + gpios = <&pca1 7 GPIO_ACTIVE_LOW>; + linux,code = <8>; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "power"; + /* TODO: dummy gpio */ + gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>; + }; + + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 15>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, + <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>, + <&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>; + }; + +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* Test Point */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart3 { + /* APSS */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>; +}; + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + /* LCD */ + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + label = "fru"; + }; + +}; + +&i2c2 { + status = "okay"; + + tmp112@48 { + compatible = "ti,tmp112"; + reg = <0x48>; + label = "inlet"; + }; + + tmp112@49 { + compatible = "ti,tmp112"; + reg = <0x49>; + label = "outlet"; + }; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tmp112@4a { + compatible = "ti,tmp112"; + reg = <0x4a>; + label = "psu_inlet"; + }; + + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tmp112@4a { + compatible = "ti,tmp112"; + reg = <0x4a>; + label = "ocp_zone"; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + tmp112@4a { + compatible = "ti,tmp112"; + reg = <0x4a>; + label = "bmc_zone"; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + tmp112@7c { + compatible = "microchip,emc1413"; + reg = <0x7c>; + }; + }; + + }; +}; + +&i2c3 { + /* Riser Card */ + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; +}; + +&i2c5 { + /* vr */ + status = "okay"; +}; + +&i2c6 { + /* bp card */ + status = "okay"; +}; + +&i2c7 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + adm1278@10 { + compatible = "adi,adm1278"; + reg = <0x10>; + }; + + adm1278@13 { + compatible = "adi,adm1278"; + reg = <0x13>; + }; + + adm1278@50 { + compatible = "adi,adm1278"; + reg = <0x50>; + }; + + adm1278@53 { + compatible = "adi,adm1278"; + reg = <0x53>; + }; + + }; + + /*pcie riser*/ + + }; +}; + +&i2c8 { + status = "okay"; + + pca0: pca9555@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + }; + + pca1: pca9555@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + pca2: pca9555@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + pca3: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + pca4: pca9555@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + pca5: pca9555@25 { + compatible = "nxp,pca9555"; + reg = <0x25>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + +}; + +&i2c9 { + /* cpld */ + status = "okay"; +}; + +&i2c10 { + /* hdd bp */ + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + power-supply@58 { + compatible = "pmbus"; + reg = <0x58>; + }; + + power-supply@5a { + compatible = "pmbus"; + reg = <0x5a>; + }; +}; + +&i2c12 { + /* odcc */ + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&gpio { + pin_gpio_b7 { + gpio-hog; + gpios = <ASPEED_GPIO(B,7) GPIO_ACTIVE_LOW>; + output-high; + line-name = "BMC_INIT_OK"; + }; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&ibt { + status = "okay"; + +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default + &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default + &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default + &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; + +&vhub { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default + &pinctrl_pwm6_default &pinctrl_pwm7_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>; + }; + + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>; + }; + + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>; + }; + + fan@5 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>; + }; + + fan@6 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>; + }; + + fan@7 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>; + }; + +}; + +#include "ibm-power9-dual.dtsi" diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts new file mode 100644 index 000000000000..d3695a32e8e0 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts @@ -0,0 +1,566 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for Lenovo Hr630 platform + * + * Copyright (C) 2019-present Lenovo + */ + +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "HR630 BMC"; + compatible = "lenovo,hr630-bmc", "aspeed,ast2500"; + + aliases { + i2c14 = &i2c_rbp; + i2c15 = &i2c_fbp1; + i2c16 = &i2c_fbp2; + i2c17 = &i2c_fbp3; + i2c18 = &i2c_riser2; + i2c19 = &i2c_pcie4; + i2c20 = &i2c_riser1; + i2c21 = &i2c_ocp; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=tty0 console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x00100000>; /* 1M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_LOW>; + }; + + fault { + gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, + <&adc 12>, <&adc 13>, <&adc 14>; + }; + +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart2 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default + &pinctrl_nrts2_default + &pinctrl_ndtr2_default + &pinctrl_ndsr2_default + &pinctrl_ncts2_default + &pinctrl_ndcd2_default + &pinctrl_nri2_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart5 { + status = "okay"; +}; + +&ibt { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&adc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default>; +}; + +&i2c0 { + status = "okay"; + /* temp1 inlet */ + tmp75@4e { + compatible = "national,lm75"; + reg = <0x4e>; + }; +}; + +&i2c1 { + status = "okay"; + /* temp2 outlet */ + tmp75@4d { + compatible = "national,lm75"; + reg = <0x4d>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + /* Slot 0, + * Slot 1, + * Slot 2, + * Slot 3 + */ + + i2c-switch@70 { + compatible = "nxp,pca9545"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; /* may use mux@70 next. */ + + i2c_rbp: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_fbp1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_fbp2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_fbp3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c7 { + status = "okay"; + + /* Slot 0, + * Slot 1, + * Slot 2, + * Slot 3 + */ + i2c-switch@76 { + compatible = "nxp,pca9546"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; /* may use mux@76 next. */ + + i2c_riser2: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_pcie4: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_riser1: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_ocp: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c8 { + status = "okay"; + + eeprom@57 { + compatible = "atmel,24c256"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default + &pinctrl_pwm5_default + &pinctrl_pwm6_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@5 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + fan@6 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@7 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; + + fan@8 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x08>; + }; + + fan@9 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x09>; + }; + + fan@10 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a>; + }; + + fan@11 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0b>; + }; + + fan@12 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0c>; + }; + + fan@13 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0d>; + }; +}; + +&gpio { + + pin_gpio_b5 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "IRQ_BMC_PCH_SMI_LPC_N"; + }; + + pin_gpio_f0 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "IRQ_BMC_PCH_NMI_R"; + }; + + pin_gpio_f3 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "I2C_BUS0_RST_OUT_N"; + }; + + pin_gpio_f4 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "FM_SKT0_FAULT_LED"; + }; + + pin_gpio_f5 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "FM_SKT1_FAULT_LED"; + }; + + pin_gpio_g4 { + gpio-hog; + gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "FAN_PWR_CTL_N"; + }; + + pin_gpio_g7 { + gpio-hog; + gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "RST_BMC_PCIE_I2CMUX_N"; + }; + + pin_gpio_h2 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PSU1_FFS_N_R"; + }; + + pin_gpio_h3 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PSU2_FFS_N_R"; + }; + + pin_gpio_i3 { + gpio-hog; + gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_INTRUDED_COVER"; + }; + + pin_gpio_j2 { + gpio-hog; + gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_BIOS_UPDATE_N"; + }; + + pin_gpio_j3 { + gpio-hog; + gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "RST_BMC_HDD_I2CMUX_N"; + }; + + pin_gpio_s2 { + gpio-hog; + gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_VGA_SW"; + }; + + pin_gpio_s4 { + gpio-hog; + gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>; + output; + line-name = "VBAT_EN_N"; + }; + + pin_gpio_s6 { + gpio-hog; + gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PU_BMC_GPIOS6"; + }; + + pin_gpio_y0 { + gpio-hog; + gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "BMC_NCSI_MUX_CTL_S0"; + }; + + pin_gpio_y1 { + gpio-hog; + gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "BMC_NCSI_MUX_CTL_S1"; + }; + + pin_gpio_z0 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "I2C_RISER2_INT_N"; + }; + + pin_gpio_z2 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "I2C_RISER2_RESET_N"; + }; + + pin_gpio_z3 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "FM_BMC_PCH_SCI_LPC_N"; + }; + + pin_gpio_z7 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "BMC_POST_CMPLT_N"; + }; + + pin_gpio_aa0 { + gpio-hog; + gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "HOST_BMC_USB_SEL"; + }; + + pin_gpio_aa5 { + gpio-hog; + gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "I2C_BUS1_RST_OUT_N"; + }; + +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts b/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts new file mode 100644 index 000000000000..73319917cb74 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts @@ -0,0 +1,207 @@ +//SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +#include "aspeed-g4.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Olympus BMC"; + compatible = "microsoft,olympus-bmc", "aspeed,ast2400"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@40000000 { + reg = <0x40000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@5f000000 { + no-map; + reg = <0x5f000000 0x01000000>; /* 16M */ + }; + }; + + leds { + compatible = "gpio-leds"; + + bmc_heartbeat { + gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>; + }; + + power_green { + gpios = <&gpio ASPEED_GPIO(U, 2) GPIO_ACTIVE_HIGH>; + }; + + power_amber { + gpios = <&gpio ASPEED_GPIO(U, 3) GPIO_ACTIVE_HIGH>; + }; + + identify { + gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>; + }; + + fault { + gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>; + }; + }; + + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>; + }; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default>; +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&wdt2 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default + &pinctrl_pwm5_default + &pinctrl_pwm6_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@5 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts index 024e52a6cd0f..de95112e2a04 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts @@ -322,3 +322,5 @@ &adc { status = "okay"; }; + +#include "ibm-power9-dual.dtsi" diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index b249da80fb83..b0cb34ccb135 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -347,3 +347,25 @@ line-name = "BMC_TPM_INT_N"; }; }; + +&fsi { + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + fsi_hub0: hub@3400 { + compatible = "ibm,fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 418a1988b262..9628ecb879cf 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -42,6 +42,13 @@ compatible = "shared-dma-pool"; reusable; }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; }; leds { @@ -304,3 +311,10 @@ &adc { status = "okay"; }; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +#include "ibm-power9-dual.dtsi" diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file mode 100644 index 000000000000..caac895c60b4 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts @@ -0,0 +1,966 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Swift BMC"; + compatible = "ibm,swift-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(B, 5)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(R, 7)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(N, 0)>; + }; + + oppanel-presence { + label = "oppanel-presence"; + gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(A, 7)>; + }; + + opencapi-riser-presence { + label = "opencapi-riser-presence"; + gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(I, 0)>; + }; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + scm0-presence { + label = "scm0-presence"; + gpios = <&pca9552 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + scm1-presence { + label = "scm1-presence"; + gpios = <&pca9552 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + cpu0vrm-presence { + label = "cpu0vrm-presence"; + gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; + linux,code = <12>; + }; + + cpu1vrm-presence { + label = "cpu1vrm-presence"; + gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; + linux,code = <13>; + }; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; + linux,code = <8>; + }; + + fanboost-presence { + label = "fanboost-presence"; + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; + linux,code = <9>; + }; + }; + + leds { + compatible = "gpio-leds"; + + fan0 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 0 GPIO_ACTIVE_LOW>; + }; + + fan1 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 1 GPIO_ACTIVE_LOW>; + }; + + fan2 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 2 GPIO_ACTIVE_LOW>; + }; + + fan3 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 3 GPIO_ACTIVE_LOW>; + }; + + fanboost { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + }; + + front-fault { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 2 GPIO_ACTIVE_LOW>; + }; + + front-power { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 3 GPIO_ACTIVE_LOW>; + }; + + front-id { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 0 GPIO_ACTIVE_LOW>; + }; + + rear-fault { + gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>; + }; + + rear-id { + gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>; + }; + + iio-hwmon-dps310 { + compatible = "iio-hwmon"; + io-channels = <&dps 0>; + }; + +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <100000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x7F80000>; + label = "obmc-ubi"; + }; + }; + }; + + flash@1 { + status = "okay"; + label = "alt-bmc"; + m25p,fast-read; + spi-max-frequency = <100000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "alt-u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "alt-u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x7F80000>; + label = "alt-obmc-ubi"; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* APSS */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&i2c2 { + status = "okay"; + + /* MUX -> + * Samtec 1 + * Samtec 2 + */ +}; + +&i2c3 { + status = "okay"; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@4 { + compatible = "pmbus-fan"; + reg = <4>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + power-supply@69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + si7021a20@20 { + compatible = "si,si7021a20"; + reg = <0x20>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca1: pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; +}; + +&i2c8 { + status = "okay"; + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", + "P9_SCM0_PRES", "P9_SCM1_PRES", + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", + "PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N", + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + ucd90160@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c9 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + + pca2: pca9539@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + }; + + gpio@1 { + reg = <1>; + }; + + gpio@2 { + reg = <2>; + }; + + gpio@3 { + reg = <3>; + }; + + gpio@4 { + reg = <4>; + }; + + gpio@5 { + reg = <5>; + }; + + gpio@6 { + reg = <6>; + }; + + gpio@7 { + reg = <7>; + }; + + gpio@8 { + reg = <8>; + }; + + gpio@9 { + reg = <9>; + }; + + gpio@10 { + reg = <10>; + }; + + gpio@11 { + reg = <11>; + }; + + gpio@12 { + reg = <12>; + }; + + gpio@13 { + reg = <13>; + }; + + gpio@14 { + reg = <14>; + }; + + gpio@15 { + reg = <15>; + }; + }; +}; + +&i2c10 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + + pca3: pca9539@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + }; + + gpio@1 { + reg = <1>; + }; + + gpio@2 { + reg = <2>; + }; + + gpio@3 { + reg = <3>; + }; + + gpio@4 { + reg = <4>; + }; + + gpio@5 { + reg = <5>; + }; + + gpio@6 { + reg = <6>; + }; + + gpio@7 { + reg = <7>; + }; + + gpio@8 { + reg = <8>; + }; + + gpio@9 { + reg = <9>; + }; + + gpio@10 { + reg = <10>; + }; + + gpio@11 { + reg = <11>; + }; + + gpio@12 { + reg = <12>; + }; + + gpio@13 { + reg = <13>; + }; + + gpio@14 { + reg = <14>; + }; + + gpio@15 { + reg = <15>; + }; + }; +}; + +&i2c11 { + /* MUX + * -> PCIe Slot 0 + * -> PCIe Slot 1 + * -> PCIe Slot 2 + * -> PCIe Slot 3 + */ + status = "okay"; +}; + +&i2c12 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c13 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + aspeed,alt-boot; +}; + +&ibt { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +#include "ibm-power9-dual.dtsi" diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts new file mode 100644 index 000000000000..0b9e29c3212e --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts @@ -0,0 +1,224 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2019 YADRO +/dts-v1/; + +#include "aspeed-g4.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Vesnin BMC"; + compatible = "yadro,vesnin-bmc", "aspeed,ast2400"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory { + reg = <0x40000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@5f000000 { + no-map; + reg = <0x5f000000 0x01000000>; /* 16MB */ + }; + flash_memory: region@5c000000 { + no-map; + reg = <0x5c000000 0x02000000>; /* 32M */ + }; + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>; + }; + power_red { + gpios = <&gpio ASPEED_GPIO(N, 1) GPIO_ACTIVE_LOW>; + }; + + id_blue { + gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_LOW>; + }; + + alarm_red { + gpios = <&gpio ASPEED_GPIO(N, 6) GPIO_ACTIVE_LOW>; + }; + + alarm_yel { + gpios = <&gpio ASPEED_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button_checkstop { + label = "checkstop"; + linux,code = <74>; + gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>; + }; + + button_identify { + label = "identify"; + linux,code = <152>; + gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>; + }; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1debug_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + }; +}; + +&mac0 { + status = "okay"; + + use-ncsi; + no-hw-checksum; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; +}; + + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi>; +}; + +&ibt { + status = "okay"; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + pagesize = <64>; + }; +}; + +&i2c1 { + status = "okay"; + + tmp75@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + occ-hwmon@50 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x50>; + }; +}; + +&i2c5 { + status = "okay"; + + occ-hwmon@51 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x51>; + }; +}; + +&i2c6 { + status = "okay"; + + w83795g@2f { + compatible = "nuvoton,w83795g"; + reg = <0x2f>; + }; +}; + +&i2c7 { + status = "okay"; + + occ-hwmon@56 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x56>; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + occ-hwmon@57 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x57>; + }; +}; + +&i2c12 { + status = "okay"; + + rtc@68 { + compatible = "maxim,ds3231"; + reg = <0x68>; + }; +}; + +&i2c13 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts index f1356ca794d8..31ea34e14c79 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -33,6 +33,13 @@ compatible = "shared-dma-pool"; reusable; }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32MM */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; }; gpio-keys { @@ -640,3 +647,10 @@ &vhub { status = "okay"; }; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +#include "ibm-power9-dual.dtsi" diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts index 2c5aa90a546d..30624378316d 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts @@ -7,6 +7,14 @@ model = "Zaius BMC"; compatible = "ingrasys,zaius-bmc", "aspeed,ast2500"; + aliases { + i2c15 = &i2cpcie0; + i2c16 = &i2cpcie1; + i2c17 = &i2cpcie2; + i2c19 = &i2cpcie3; + i2c20 = &i2cpcie4; + }; + chosen { stdout-path = &uart5; bootargs = "console=ttyS4,115200 earlyprintk"; @@ -223,6 +231,27 @@ reg = <0x71>; #address-cells = <1>; #size-cells = <0>; + + i2cpcie0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2cpcie1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2cpcie2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2ctpm: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; }; /* MUX1 PCA9546A @71h @@ -253,6 +282,17 @@ reg = <0x71>; #address-cells = <1>; #size-cells = <0>; + + i2cpcie3: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2cpcie4: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; }; /* MUX1 PCA9546A @71h @@ -296,33 +336,98 @@ reg = <0x54>; }; }; + + }; + + vrm@64 { + compatible = "isil,isl68137"; + reg = <0x64>; + }; + + vrm@40 { + compatible = "isil,isl68137"; + reg = <0x40>; + }; + + vrm@60 { + compatible = "isil,isl68137"; + reg = <0x60>; + }; + + vrm@43 { + compatible = "infineon,ir38064"; + reg = <0x43>; + }; + + vrm@41 { + compatible = "isil,isl68137"; + reg = <0x41>; }; /* Master selector PCA9541A @70h (other master: CPU0) * LM5066I PMBUS @10h */ - /* 12V Quarter Brick DC/DC Converter Q54SJ12050 @61h */ - power-brick@61 { + /* + * Brick will be one of these types/addresses. Depending + * on the board SKU only one is actually present and will successfully + * instantiate while the others will fail the probe operation. + * These are the PVT (and presumably beyond) addresses: + * 12V Quarter Brick DC/DC Converter Q54SJ12050 @6Ah + * 12V Quarter Brick DC/DC Converter Q54SH12050 @30h + */ + power-brick@6a { + compatible = "delta,dps800"; + reg = <0x6a>; + }; + power-brick@30 { compatible = "delta,dps800"; - reg = <0x61>; + reg = <0x30>; }; /* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */ /* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */ /* CPU0 VR ISL68137 0.8V PMBUS @60h */ - /* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @41h */ + /* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @43h */ /* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */ + /* Master selector PCA9541A @70h (other master: CPU0) + * LM5066I PMBUS @10h + */ }; &i2c8 { status = "okay"; - /* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @65h */ - /* CPU1 VR ISL68137 1.2V CH03 PMBUS @44h */ - /* CPU1 VR ISL68137 0.8V PMBUS @61h */ + vrm@64 { + compatible = "isil,isl68137"; + reg = <0x64>; + }; + + vrm@40 { + compatible = "isil,isl68137"; + reg = <0x40>; + }; + + vrm@41 { + compatible = "isil,isl68137"; + reg = <0x41>; + }; + + vrm@42 { + compatible = "infineon,ir38064"; + reg = <0x42>; + }; + + vrm@60 { + compatible = "isil,isl68137"; + reg = <0x60>; + }; + + /* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @64h */ + /* CPU1 VR ISL68137 1.2V CH03 PMBUS @40h */ + /* CPU1 VR ISL68137 1.2V CH47 PMBUS @41h */ /* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */ - /* CPU0 VR ISL68137 1.2V CH47 PMBUS @45h */ + /* CPU1 VR ISL68137 0.8V PMBUS @60h */ }; @@ -435,3 +540,5 @@ &ibt { status = "okay"; }; + +#include "ibm-power9-dual.dtsi" diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts index 0d7c6339da46..a68ff0675c28 100644 --- a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts +++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts @@ -112,6 +112,11 @@ &pinctrl_ddcclk_default &pinctrl_ddcdat_default>; }; +&p2a { + status = "okay"; + memory-region = <&vga_memory>; +}; + &ibt { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 5d7050d00874..dd4b0b15afcf 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -53,7 +53,7 @@ #size-cells = <1>; ranges; - fmc: flash-controller@1e620000 { + fmc: spi@1e620000 { reg = < 0x1e620000 0x94 0x20000000 0x10000000 >; #address-cells = <1>; @@ -69,7 +69,7 @@ }; }; - spi: flash-controller@1e630000 { + spi: spi@1e630000 { reg = < 0x1e630000 0x18 0x30000000 0x10000000 >; #address-cells = <1>; @@ -165,6 +165,10 @@ compatible = "aspeed,g4-pinctrl"; }; + p2a: p2a-control { + compatible = "aspeed,ast2400-p2a-ctrl"; + status = "disabled"; + }; }; rng: hwrng@1e6e2078 { diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 4345c3153ca7..5b1ca265c2ce 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -60,7 +60,7 @@ #size-cells = <1>; ranges; - fmc: flash-controller@1e620000 { + fmc: spi@1e620000 { reg = < 0x1e620000 0xc4 0x20000000 0x10000000 >; #address-cells = <1>; @@ -86,7 +86,7 @@ }; }; - spi1: flash-controller@1e630000 { + spi1: spi@1e630000 { reg = < 0x1e630000 0xc4 0x30000000 0x08000000 >; #address-cells = <1>; @@ -106,7 +106,7 @@ }; }; - spi2: flash-controller@1e631000 { + spi2: spi@1e631000 { reg = < 0x1e631000 0xc4 0x38000000 0x08000000 >; #address-cells = <1>; @@ -219,6 +219,11 @@ aspeed,external-nodes = <&gfx &lhc>; }; + + p2a: p2a-control { + compatible = "aspeed,ast2500-p2a-ctrl"; + status = "disabled"; + }; }; rng: hwrng@1e6e2078 { diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-wb50n.dtsi index 85692c8ef2b1..4ed8500a5cb8 100644 --- a/arch/arm/boot/dts/at91-wb50n.dtsi +++ b/arch/arm/boot/dts/at91-wb50n.dtsi @@ -42,7 +42,7 @@ clock-frequency = <12000000>; }; -&slow_osc { +&clk32k { atmel,osc-bypass; }; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 1fa84d2f06c7..7debdeabcf2f 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -14,14 +14,6 @@ chosen { bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw"; stdout-path = "serial0:115200n8"; - - clocksource { - timer = <&timer0>; - }; - - clockevent { - timer = <&timer1>; - }; }; memory { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 9483609a2105..691c95ea6175 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -1258,30 +1258,11 @@ }; }; - sckc@fffffd50 { + clk32k: sckc@fffffd50 { compatible = "atmel,at91sam9x5-sckc"; reg = <0xfffffd50 0x4>; - - slow_osc: slow_osc { - compatible = "atmel,at91sam9x5-clk-slow-osc"; - #clock-cells = <0>; - atmel,startup-time-usec = <1200000>; - clocks = <&slow_xtal>; - }; - - slow_rc_osc: slow_rc_osc { - compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; - #clock-cells = <0>; - atmel,startup-time-usec = <75>; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - }; - - clk32k: slck { - compatible = "atmel,at91sam9x5-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc &slow_osc>; - }; + clocks = <&slow_xtal>; + #clock-cells = <0>; }; rtc@fffffd20 { diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index e2d38ce43442..8643b7151565 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -868,30 +868,11 @@ status = "disabled"; }; - sckc@fffffd50 { + clk32k: sckc@fffffd50 { compatible = "atmel,at91sam9x5-sckc"; reg = <0xfffffd50 0x4>; - - slow_osc: slow_osc { - compatible = "atmel,at91sam9x5-clk-slow-osc"; - #clock-cells = <0>; - atmel,startup-time-usec = <1200000>; - clocks = <&slow_xtal>; - }; - - slow_rc_osc: slow_rc_osc { - compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; - #clock-cells = <0>; - atmel,startup-time-usec = <75>; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - }; - - clk32k: slck { - compatible = "atmel,at91sam9x5-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc &slow_osc>; - }; + clocks = <&slow_xtal>; + #clock-cells = <0>; }; rtc@fffffd20 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 9b7ce6bb1ddc..ef47c005ef03 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -149,28 +149,11 @@ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; - sckc@fffffe50 { + clk32k: sckc@fffffe50 { compatible = "atmel,at91sam9x5-sckc"; reg = <0xfffffe50 0x4>; - - slow_osc: slow_osc { - compatible = "atmel,at91sam9x5-clk-slow-osc"; - #clock-cells = <0>; - clocks = <&slow_xtal>; - }; - - slow_rc_osc: slow_rc_osc { - compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - }; - - clk32k: slck { - compatible = "atmel,at91sam9x5-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc>, <&slow_osc>; - }; + clocks = <&slow_xtal>; + #clock-cells = <0>; }; tcb0: timer@f8008000 { diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi index 80b6ba4ca50c..52f91a12a99a 100644 --- a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi @@ -42,7 +42,7 @@ clocks { }; /* Cygnus ARM PLL */ - armpll: armpll { + armpll: armpll@19000000 { #clock-cells = <0>; compatible = "brcm,cygnus-armpll"; clocks = <&osc>; @@ -67,7 +67,7 @@ clocks { clock-mult = <1>; }; - genpll: genpll { + genpll: genpll@301d000 { #clock-cells = <1>; compatible = "brcm,cygnus-genpll"; reg = <0x0301d000 0x2c>, <0x0301c020 0x4>; @@ -94,7 +94,7 @@ clocks { clock-mult = <1>; }; - lcpll0: lcpll0 { + lcpll0: lcpll0@301d02c { #clock-cells = <1>; compatible = "brcm,cygnus-lcpll0"; reg = <0x0301d02c 0x1c>, <0x0301c020 0x4>; @@ -103,7 +103,7 @@ clocks { "usb_phy", "smart_card", "ch5"; }; - mipipll: mipipll { + mipipll: mipipll@180a9800 { #clock-cells = <1>; compatible = "brcm,cygnus-mipipll"; reg = <0x180a9800 0x2c>, <0x0301c020 0x4>, <0x180aa024 0x4>; @@ -113,7 +113,7 @@ clocks { "ch5_unused"; }; - asiu_clks: asiu_clks { + asiu_clks: asiu_clks@301d048 { #clock-cells = <1>; compatible = "brcm,cygnus-asiu-clk"; reg = <0x0301d048 0xc>, <0x180aa024 0x4>; @@ -122,7 +122,7 @@ clocks { clock-output-names = "keypad", "adc/touch", "pwm"; }; - audiopll: audiopll { + audiopll: audiopll@180aeb00 { #clock-cells = <1>; compatible = "brcm,cygnus-audiopll"; reg = <0x180aeb00 0x68>; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 5f7b46503a51..2dac3efc7640 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -45,7 +45,7 @@ ethernet0 = ð0; }; - memory { + memory@0 { device_type = "memory"; reg = <0 0>; }; @@ -69,7 +69,7 @@ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; }; - core { + core@19000000 { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x1000000>; #address-cells = <1>; @@ -91,7 +91,7 @@ <0x20100 0x100>; }; - L2: l2-cache { + L2: l2-cache@22000 { compatible = "arm,pl310-cache"; reg = <0x22000 0x1000>; cache-unified; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 6925b30c2253..da6d70f09ef1 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -77,7 +77,7 @@ interrupt-affinity = <&cpu0>, <&cpu1>; }; - mpcore { + mpcore@19000000 { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; @@ -122,7 +122,7 @@ <0x20100 0x100>; }; - L2: l2-cache { + L2: l2-cache@22000 { compatible = "arm,pl310-cache"; reg = <0x22000 0x1000>; cache-unified; @@ -166,7 +166,7 @@ }; }; - axi { + axi@18000000 { compatible = "simple-bus"; ranges = <0x00000000 0x18000000 0x0011c40c>; #address-cells = <1>; @@ -415,9 +415,6 @@ "imp_sleep_timer_p5", "imp_sleep_timer_p7", "imp_sleep_timer_p8"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; /* ports are defined in board DTS */ diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index b99c2e579622..6197e7d80e3b 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -100,7 +100,7 @@ reg-io-width = <4>; }; - L2: l2-cache { + L2: l2-cache@3ff20000 { compatible = "brcm,bcm11351-a2-pl310-cache"; reg = <0x3ff20000 0x1000>; cache-unified; @@ -225,21 +225,21 @@ #size-cells = <1>; ranges; - root_ccu: root_ccu { + root_ccu: root_ccu@35001000 { compatible = "brcm,bcm11351-root-ccu"; reg = <0x35001000 0x0f00>; #clock-cells = <1>; clock-output-names = "frac_1m"; }; - hub_ccu: hub_ccu { + hub_ccu: hub_ccu@34000000 { compatible = "brcm,bcm11351-hub-ccu"; reg = <0x34000000 0x0f00>; #clock-cells = <1>; clock-output-names = "tmon_1m"; }; - aon_ccu: aon_ccu { + aon_ccu: aon_ccu@35002000 { compatible = "brcm,bcm11351-aon-ccu"; reg = <0x35002000 0x0f00>; #clock-cells = <1>; @@ -248,7 +248,7 @@ "pmu_bsc_var"; }; - master_ccu: master_ccu { + master_ccu: master_ccu@3f001000 { compatible = "brcm,bcm11351-master-ccu"; reg = <0x3f001000 0x0f00>; #clock-cells = <1>; @@ -261,7 +261,7 @@ "hsic2_12m"; }; - slave_ccu: slave_ccu { + slave_ccu: slave_ccu@3e011000 { compatible = "brcm,bcm11351-slave-ccu"; reg = <0x3e011000 0x0f00>; #clock-cells = <1>; diff --git a/arch/arm/boot/dts/bcm21664-garnet.dts b/arch/arm/boot/dts/bcm21664-garnet.dts index 8b045cfab64b..be468f4adc37 100644 --- a/arch/arm/boot/dts/bcm21664-garnet.dts +++ b/arch/arm/boot/dts/bcm21664-garnet.dts @@ -21,7 +21,7 @@ model = "BCM21664 Garnet board"; compatible = "brcm,bcm21664-garnet", "brcm,bcm21664"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi index 758daa334148..3cf66faf3b56 100644 --- a/arch/arm/boot/dts/bcm21664.dtsi +++ b/arch/arm/boot/dts/bcm21664.dtsi @@ -90,7 +90,7 @@ reg-io-width = <4>; }; - L2: l2-cache { + L2: l2-cache@3ff20000 { compatible = "arm,pl310-cache"; reg = <0x3ff20000 0x1000>; cache-unified; @@ -295,21 +295,21 @@ clock-frequency = <156000000>; }; - root_ccu: root_ccu { + root_ccu: root_ccu@35001000 { compatible = BCM21664_DT_ROOT_CCU_COMPAT; reg = <0x35001000 0x0f00>; #clock-cells = <1>; clock-output-names = "frac_1m"; }; - aon_ccu: aon_ccu { + aon_ccu: aon_ccu@35002000 { compatible = BCM21664_DT_AON_CCU_COMPAT; reg = <0x35002000 0x0f00>; #clock-cells = <1>; clock-output-names = "hub_timer"; }; - master_ccu: master_ccu { + master_ccu: master_ccu@3f001000 { compatible = BCM21664_DT_MASTER_CCU_COMPAT; reg = <0x3f001000 0x0f00>; #clock-cells = <1>; @@ -323,7 +323,7 @@ "sdio4_sleep"; }; - slave_ccu: slave_ccu { + slave_ccu: slave_ccu@3e011000 { compatible = BCM21664_DT_SLAVE_CCU_COMPAT; reg = <0x3e011000 0x0f00>; #clock-cells = <1>; diff --git a/arch/arm/boot/dts/bcm23550-sparrow.dts b/arch/arm/boot/dts/bcm23550-sparrow.dts index 1c66b15f3013..ace77709f468 100644 --- a/arch/arm/boot/dts/bcm23550-sparrow.dts +++ b/arch/arm/boot/dts/bcm23550-sparrow.dts @@ -45,7 +45,7 @@ bootargs = "console=ttyS0,115200n8"; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi index 701198f5f498..a36c9b1d23c8 100644 --- a/arch/arm/boot/dts/bcm23550.dtsi +++ b/arch/arm/boot/dts/bcm23550.dtsi @@ -371,21 +371,21 @@ clock-frequency = <156000000>; }; - root_ccu: root_ccu { + root_ccu: root_ccu@35001000 { compatible = BCM21664_DT_ROOT_CCU_COMPAT; reg = <0x35001000 0x0f00>; #clock-cells = <1>; clock-output-names = "frac_1m"; }; - aon_ccu: aon_ccu { + aon_ccu: aon_ccu@35002000 { compatible = BCM21664_DT_AON_CCU_COMPAT; reg = <0x35002000 0x0f00>; #clock-cells = <1>; clock-output-names = "hub_timer"; }; - slave_ccu: slave_ccu { + slave_ccu: slave_ccu@3e011000 { compatible = BCM21664_DT_SLAVE_CCU_COMPAT; reg = <0x3e011000 0x0f00>; #clock-cells = <1>; @@ -398,7 +398,7 @@ "bsc4"; }; - master_ccu: master_ccu { + master_ccu: master_ccu@3f001000 { compatible = BCM21664_DT_MASTER_CCU_COMPAT; reg = <0x3f001000 0x0f00>; #clock-cells = <1>; diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts index fbfca83bd28f..ead6e9804dbf 100644 --- a/arch/arm/boot/dts/bcm28155-ap.dts +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -21,7 +21,7 @@ model = "BCM28155 AP board"; compatible = "brcm,bcm28155-ap", "brcm,bcm11351"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 9777644c6c2b..4b21ddb26aa5 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -431,6 +431,8 @@ reg = <0x7e204000 0x1000>; interrupts = <2 22>; clocks = <&clocks BCM2835_CLOCK_VPU>; + dmas = <&dma 6>, <&dma 7>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts index 1c6f561ac52b..6a96655d8626 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -69,8 +69,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; rfkill { label = "WiFi"; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts index e550799a6ae0..3b0029e61b4c 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -53,8 +53,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; brightness { label = "Backlight"; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index 7bfa2238f70b..90f57bad6b24 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; @@ -99,8 +99,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts index fd361c9b1374..41548d6d479a 100644 --- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts @@ -16,15 +16,13 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts index 7c34360d3285..cd797b4202ad 100644 --- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts @@ -17,15 +17,13 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts index 969b8d78e492..e58c8077be1d 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts @@ -15,7 +15,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -44,8 +44,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index b62854ee27ab..766db617455b 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -51,8 +51,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 75f7b4ef35da..fed75e6ab58c 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -62,8 +62,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 148d16a9085e..79542e18915c 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -58,8 +58,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index eed3aab6679b..abd35a518046 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -93,8 +93,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; rfkill { label = "WiFi"; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index fe842f2f1ca7..c29950b43a95 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -59,8 +59,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index 6fcbb0509ba0..4dcec6865469 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -90,8 +90,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; aoss { label = "AOSS"; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index b3e8cc90b13f..0e349e39f608 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -95,8 +95,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts index fdeaa895512f..b9d95011637d 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts @@ -15,7 +15,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -44,8 +44,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts index 0d510cb15ec3..0052e1b24130 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -16,7 +16,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -88,8 +88,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts index 962e89edba11..01c390ed48ea 100644 --- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts @@ -15,7 +15,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -76,8 +76,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; rfkill { label = "WiFi"; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index 658a56ff8a5c..911c65fbf251 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -85,8 +85,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts index 5fd47eec4407..18d0ae46e76c 100644 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -16,7 +16,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -24,8 +24,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts index 6604be6ff0a0..50f7cd08cfbb 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts @@ -16,7 +16,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; @@ -43,8 +43,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts index 567ebbd5a0e9..b47fb0700a1f 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts @@ -15,7 +15,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -42,8 +42,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts index ac2d136ed334..bcc420f85b56 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts @@ -16,7 +16,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; @@ -43,8 +43,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index 74371e821b1a..ac7515423474 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -16,7 +16,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -83,8 +83,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts index b44af63ee310..6d28b7dacd05 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts @@ -16,7 +16,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; @@ -58,8 +58,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts index eebc0d43e220..f42a1703f4ab 100644 --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts @@ -16,7 +16,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; @@ -64,8 +64,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; brightness { label = "Backlight"; diff --git a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts index 456045f17a00..ac3a4483dcb3 100644 --- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts +++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts @@ -13,7 +13,7 @@ compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708"; model = "Phicomm K3"; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; @@ -21,8 +21,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts index eb59508578e4..57ca1cfaecd8 100644 --- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts @@ -15,7 +15,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -38,8 +38,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts index 4c71f5e95e00..2e1a7e382cb7 100644 --- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts @@ -15,7 +15,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -48,8 +48,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts index 5ad53ea52d0a..049cdfd92706 100644 --- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts @@ -15,7 +15,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -58,8 +58,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; rfkill { label = "WiFi"; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index ac5266ee8d4c..372dc1eb88a0 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -19,7 +19,7 @@ #size-cells = <1>; interrupt-parent = <&gic>; - chipcommonA { + chipcommonA@18000000 { compatible = "simple-bus"; ranges = <0x00000000 0x18000000 0x00001000>; #address-cells = <1>; @@ -44,7 +44,7 @@ }; }; - mpcore { + mpcore@19000000 { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; @@ -148,7 +148,7 @@ }; }; - usb2_phy: usb2-phy { + usb2_phy: usb2-phy@1800c000 { compatible = "brcm,ns-usb2-phy"; reg = <0x1800c000 0x1000>; reg-names = "dmu"; @@ -357,7 +357,7 @@ #address-cells = <0>; }; - mdio-bus-mux { + mdio-bus-mux@18003000 { compatible = "mdio-mux-mmioreg"; mdio-parent-bus = <&mdio>; #address-cells = <1>; @@ -464,8 +464,6 @@ srab: srab@18007000 { compatible = "brcm,bcm5301x-srab"; reg = <0x18007000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index b29695bd4855..4af8e3293cff 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -32,7 +32,7 @@ }; }; - mpcore { + mpcore@18310000 { compatible = "simple-bus"; ranges = <0x00000000 0x18310000 0x00008000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index e6a41e1b27fd..9c0325cf9e22 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -41,9 +41,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <0>; - /* UBUS peripheral clock */ periph_clk: periph_clk { #clock-cells = <0>; @@ -94,7 +91,7 @@ reg = <0x1e000 0x100>; }; - gic: interrupt-controller@1e100 { + gic: interrupt-controller@1f000 { compatible = "arm,cortex-a9-gic"; reg = <0x1f000 0x1000 0x1e100 0x100>; @@ -125,7 +122,7 @@ IRQ_TYPE_LEVEL_HIGH)>; }; - armpll: armpll { + armpll: armpll@20000 { #clock-cells = <0>; compatible = "brcm,bcm63138-armpll"; clocks = <&periph_clk>; @@ -144,7 +141,7 @@ #reset-cells = <2>; }; - ahci: sata@8000 { + ahci: sata@a000 { compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci"; reg-names = "ahci", "top-ctrl"; reg = <0xa000 0x9ac>, <0x8040 0x24>; diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts index 8006c69a3fdf..8313b7cad542 100644 --- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts +++ b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts @@ -6,7 +6,7 @@ model = "Broadcom STB (bcm7445), SVMB reference board"; compatible = "brcm,bcm7445", "brcm,brcmstb"; - memory { + memory@0 { device_type = "memory"; reg = <0x00 0x00000000 0x00 0x40000000>, <0x00 0x40000000 0x00 0x40000000>, diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi index 504a63236a5e..58f67c9b830b 100644 --- a/arch/arm/boot/dts/bcm7445.dtsi +++ b/arch/arm/boot/dts/bcm7445.dtsi @@ -63,7 +63,7 @@ <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>; }; - rdb { + rdb@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -224,7 +224,7 @@ }; - memory_controllers { + memory_controllers@f1100000 { compatible = "simple-bus"; ranges = <0x0 0x0 0xf1100000 0x200000>; #address-cells = <1>; @@ -252,7 +252,7 @@ }; }; - memc@1 { + memc@80000 { compatible = "brcm,brcmstb-memc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -274,7 +274,7 @@ }; }; - memc@2 { + memc@100000 { compatible = "brcm,brcmstb-memc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts index 53f990defd6a..b2d323f4a5ab 100644 --- a/arch/arm/boot/dts/bcm911360_entphn.dts +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -49,8 +49,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; hook { label = "HOOK"; diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts index 4991700ae6b0..b0b8c774a37f 100644 --- a/arch/arm/boot/dts/bcm947189acdbmr.dts +++ b/arch/arm/boot/dts/bcm947189acdbmr.dts @@ -17,7 +17,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -43,8 +43,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts index 250a1d6f2d05..957468224622 100644 --- a/arch/arm/boot/dts/bcm953012er.dts +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -39,15 +39,13 @@ model = "NorthStar Enterprise Router (BCM953012ER)"; compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708"; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x8000000>; }; gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index 52c4c6c9d3f1..046c59fb4846 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -43,7 +43,7 @@ serial1 = &uart1; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index 21479b4ce823..8c388eb8a08f 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index cda3d790965b..c339771bb22e 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index f86649812b59..1c72ec8288de 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index df60602b054d..96a021cebd97 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index 3893e7af343a..b2c7f21d471e 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index cf226b02141f..a2c9de35ddfb 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 10b3d512bb33..3fcca12d83c2 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -42,7 +42,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts index 29525686e51a..5b177274f182 100644 --- a/arch/arm/boot/dts/bcm963138dvt.dts +++ b/arch/arm/boot/dts/bcm963138dvt.dts @@ -16,7 +16,7 @@ stdout-path = &serial0; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index e39db14d805e..edd0f630e025 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index f2d2b872333e..5b2b1ed04d51 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -188,6 +188,19 @@ }; }; +&cpu { + cpu-supply = <&vdcdc3_reg>; +}; + +/* + * The standard da850-evm kits and SOM's are 375MHz so enable this operating + * point by default. Higher frequencies must be enabled for custom boards with + * other variants of the SoC. + */ +&opp_375 { + status = "okay"; +}; + &sata { status = "okay"; }; diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index 2fd2a6838dab..e379d6e7ad49 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -154,12 +154,48 @@ }; }; }; + + cvdd: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "cvdd"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; }; &ref_clk { clock-frequency = <24000000>; }; +&cpu { + cpu-supply = <&cvdd>; +}; + +/* + * LCDK has a fixed CVDD of 1.3V, so only operating points >= 300MHz are + * valid. Unfortunately due to a problem with the DA8XX OHCI controller, we + * can't enable more than one OPP by default, since the controller sometimes + * becomes unresponsive after a transition. Fix the frequency at 456 MHz. + */ + +&opp_100 { + status = "disabled"; +}; + +&opp_200 { + status = "disabled"; +}; + +&opp_300 { + status = "disabled"; +}; + +&opp_456 { + status = "okay"; +}; + &pmx_core { status = "okay"; diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts index 09c3666def66..afd04a423856 100644 --- a/arch/arm/boot/dts/da850-lego-ev3.dts +++ b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -122,6 +122,15 @@ amp-supply = <&>; }; + cvdd: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "cvdd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + /* * This is a 5V current limiting regulator that is shared by USB, * the sensor (input) ports, the motor (output) ports and the A/DC. @@ -201,6 +210,27 @@ clock-frequency = <24000000>; }; +&cpu { + cpu-supply = <&cvdd>; +}; + +/* since we have a fixed regulator, we can't run at these points */ +&opp_100 { + status = "disabled"; +}; + +&opp_200 { + status = "disabled"; +}; + +/* + * The SoC is actually the 456MHz version, but because of the fixed regulator + * This is the fastest we can go. + */ +&opp_375 { + status = "okay"; +}; + &pmx_core { status = "okay"; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index e6e78b88cacb..7cf31b6e48b7 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -16,6 +16,56 @@ reg = <0xc0000000 0x0>; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu: cpu@0 { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + reg = <0>; + clocks = <&psc0 14>; + operating-points-v2 = <&opp_table>; + }; + }; + + opp_table: opp-table { + compatible = "operating-points-v2"; + + opp_100: opp100-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <1000000 950000 1050000>; + }; + + opp_200: opp110-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <1100000 1050000 1160000>; + }; + + opp_300: opp120-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1200000 1140000 1320000>; + }; + + /* + * Original silicon was 300MHz max, so higher frequencies + * need to be enabled on a per-board basis if the chip is + * capable. + */ + + opp_375: opp120-375000000 { + status = "disabled"; + opp-hz = /bits/ 64 <375000000>; + opp-microvolt = <1200000 1140000 1320000>; + }; + + opp_456: opp130-456000000 { + status = "disabled"; + opp-hz = /bits/ 64 <456000000>; + opp-microvolt = <1300000 1250000 1350000>; + }; + }; + arm { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index abfff54d6de5..0a27f034dd6b 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -25,7 +25,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial1:115200n8"; }; diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index ace50e194a45..dee35e3a5c4b 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -59,6 +59,11 @@ cpu0-supply = <&buck2_reg>; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &i2c_0 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index e25765500e99..248bd372fe70 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -172,6 +172,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &hsotg { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 7479993755da..86c26a4edfd7 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -244,6 +244,11 @@ }; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &i2c_0 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 8ce3a7786b19..5659c4a10729 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -462,6 +462,39 @@ status = "disabled"; }; + gpu: gpu@13000000 { + compatible = "samsung,exynos4210-mali", "arm,mali-400"; + reg = <0x13000000 0x10000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3", + "pmu"; + clocks = <&cmu CLK_G3D>, + <&cmu CLK_SCLK_G3D>; + clock-names = "bus", "core"; + power-domains = <&pd_g3d>; + status = "disabled"; + /* TODO: operating points for DVFS, assigned clock as 134 MHz */ + }; + mfc: codec@13400000 { compatible = "samsung,mfc-v7"; reg = <0x13400000 0x10000>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 36ccf227434d..1264cc431ff6 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -54,7 +54,7 @@ pmu: pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&combiner>; - interrupts = <2 2>, <3 2>; + status = "disabled"; }; soc: soc { @@ -415,6 +415,20 @@ }; }; + gpu: gpu@13000000 { + compatible = "samsung,exynos4210-mali", "arm,mali-400"; + reg = <0x13000000 0x10000>; + /* + * CLK_G3D is not actually bus clock but a IP-level clock. + * The bus clock is not described in hardware manual. + */ + clocks = <&clock CLK_G3D>, + <&clock CLK_SCLK_G3D>; + clock-names = "bus", "core"; + power-domains = <&pd_g3d>; + status = "disabled"; + }; + i2s1: i2s@13960000 { compatible = "samsung,s3c6410-i2s"; reg = <0x13960000 0x100>; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 36b1edea254a..0d1e1a9c2f6e 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -132,6 +132,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &hsotg { vusb_d-supply = <&ldo3_reg>; vusb_a-supply = <&ldo8_reg>; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 6882480dbaf7..7c39dd1c4d3a 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -239,6 +239,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &hsotg { vusb_d-supply = <&vusb_reg>; vusb_a-supply = <&vusbdac_reg>; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index bf092e97e14f..82a8b5449978 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -262,6 +262,11 @@ }; }; +&gpu { + mali-supply = <&buck2_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index b491c345b2e8..f220716239db 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -8,7 +8,7 @@ * www.linaro.org * * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210 - * based board files can include this file and provide values for board specfic + * based board files can include this file and provide values for board specific * bindings. * * Note: This file does not include device nodes for all the controllers in @@ -381,13 +381,13 @@ trips { cpu_alert0: cpu-alert-0 { - temperature = <85000>; /* millicelsius */ + temperature = <85000>; /* millicelsius */ }; cpu_alert1: cpu-alert-1 { - temperature = <100000>; /* millicelsius */ + temperature = <100000>; /* millicelsius */ }; cpu_alert2: cpu-alert-2 { - temperature = <110000>; /* millicelsius */ + temperature = <110000>; /* millicelsius */ }; }; }; @@ -449,6 +449,43 @@ samsung,lcd-wb; }; +&gpu { + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3"; + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <950000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <1050000>; + }; + }; +}; + &mdma1 { power-domains = <&pd_lcd0>; }; @@ -461,6 +498,12 @@ <&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>; }; +&pmu { + interrupts = <2 2>, <3 2>; + interrupt-affinity = <&cpu0>, <&cpu1>; + status = "okay"; +}; + &pmu_system_controller { clock-names = "clkout0", "clkout1", "clkout2", "clkout3", "clkout4", "clkout8", "clkout9"; diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi index 30eee5942eff..ce87d2ff27aa 100644 --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -15,6 +15,24 @@ i2c10 = &i2c_cm36651; }; + aat1290 { + compatible = "skyworks,aat1290"; + flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>; + enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default", "host", "isp"; + pinctrl-0 = <&camera_flash_host>; + pinctrl-1 = <&camera_flash_host>; + pinctrl-2 = <&camera_flash_isp>; + + flash-led { + label = "flash"; + led-max-microamp = <520833>; + flash-max-microamp = <1012500>; + flash-max-timeout-us = <1940000>; + }; + }; + lcd_vdd3_reg: voltage-regulator-6 { compatible = "regulator-fixed"; regulator-name = "LCD_VDD_2.2V"; @@ -131,6 +149,20 @@ regulator-max-microvolt = <2800000>; }; +&pinctrl_0 { + camera_flash_host: camera-flash-host { + samsung,pins = "gpj1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-val = <0>; + }; + + camera_flash_isp: camera-flash-isp { + samsung,pins = "gpj1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-val = <1>; + }; +}; + &s5c73m3 { standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ vdda-supply = <&ldo17_reg>; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index 0038465f38f1..462a5409b1de 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -115,6 +115,11 @@ cpu0-supply = <&buck2_reg>; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &hsotg { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 4c15cb616cdf..83be3a797411 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -453,6 +453,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 08d3a0a7b4eb..ea55f377d17c 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -229,6 +229,11 @@ assigned-clock-rates = <0>, <176000000>; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi index d83fbd4e434c..3731a225f779 100644 --- a/arch/arm/boot/dts/exynos4412-prime.dtsi +++ b/arch/arm/boot/dts/exynos4412-prime.dtsi @@ -38,3 +38,10 @@ cooling-device = <&cpu0 15 15>, <&cpu1 15 15>, <&cpu2 15 15>, <&cpu3 15 15>; }; + +&gpu_opp_table { + opp-533000000 { + opp-hz = /bits/ 64 <533000000>; + opp-microvolt = <1075000>; + }; +}; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index e5c041ec0756..d20db2dfe8e2 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -716,6 +716,53 @@ cpu-offset = <0x4000>; }; +&gpu { + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3", + "pmu"; + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <875000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <900000>; + }; + opp-350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <950000>; + }; + opp-440000000 { + opp-hz = /bits/ 64 <440000000>; + opp-microvolt = <1025000>; + }; + }; +}; + &hdmi { compatible = "samsung,exynos4212-hdmi"; }; @@ -737,6 +784,8 @@ &pmu { interrupts = <2 2>, <3 2>, <18 2>, <19 2>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + status = "okay"; }; &pmu_system_controller { diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index 8f9e08f940ab..e0db251e253f 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -85,6 +85,11 @@ }; }; +&adc { + vdd-supply = <&ldo10_reg>; + status = "okay"; +}; + &audi2s0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 57fc9c949e54..e6f78b1cee7c 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -260,6 +260,12 @@ }; }; +&adc { + clocks = <&clock CLK_TSADC>; + clock-names = "adc"; + samsung,syscon-phandle = <&pmu_system_controller>; +}; + &arm_a15_pmu { interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index dbf0306896f6..592d7b45ecc8 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -386,6 +386,10 @@ * (Linaro for Arndale Octa, v2012.07). */ regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo4_reg: LDO4 { @@ -411,6 +415,10 @@ regulator-name = "PVDD_ANAIP_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo8_reg: LDO8 { @@ -451,6 +459,10 @@ regulator-name = "PVDD_APIO_MMCOFF_2V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo14_reg: LDO14 { @@ -464,12 +476,20 @@ regulator-name = "PVDD_PERI_2V8"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo16_reg: LDO16 { regulator-name = "PVDD_PERI_3V3"; regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo17_reg: LDO17 { @@ -483,12 +503,28 @@ regulator-name = "PVDD_EMMC_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + /* + * Must stay in "off" mode during shutdown for + * proper eMMC reset. The "off" mode is in + * fact controlled by LDO18EN. The eMMC does + * not have reset pin connected so the reset + * will be triggered by falling edge of + * LDO18EN. + */ + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo19_reg: LDO19 { regulator-name = "PVDD_TFLASH_2V8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo20_reg: LDO20 { @@ -515,12 +551,20 @@ regulator-min-microvolt = <800000>; regulator-max-microvolt = <1100000>; regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo24_reg: LDO24 { regulator-name = "PVDD_CAM1_AVDD_2V8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo25_reg: LDO25 { @@ -540,6 +584,10 @@ regulator-name = "PVDD_G3DS_1V0"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1100000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo28_reg: LDO28 { @@ -615,55 +663,75 @@ buck1_reg: BUCK1 { regulator-name = "PVDD_MIF_1V1"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck2_reg: BUCK2 { regulator-name = "vdd_arm"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck3_reg: BUCK3 { regulator-name = "PVDD_INT_1V0"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck4_reg: BUCK4 { regulator-name = "PVDD_G3D_1V0"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck5_reg: BUCK5 { regulator-name = "PVDD_LPDDR3_1V2"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; regulator-always-on; }; buck6_reg: BUCK6 { regulator-name = "PVDD_KFC_1V0"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck7_reg: BUCK7 { regulator-name = "VIN_LLDO_1V4"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; regulator-always-on; }; buck8_reg: BUCK8 { regulator-name = "VIN_MLDO_2V0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <2000000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; regulator-always-on; }; @@ -678,6 +746,18 @@ regulator-name = "PVDD_EMMCF_2V8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + /* + * Must stay in "off" mode during shutdown for + * proper eMMC reset. The "off" mode is in + * fact controlled by BUCK10EN. The eMMC does + * not have reset pin connected so the reset + * will be triggered by falling edge of + * BUCK10EN. + */ + + regulator-state-mem { + regulator-off-in-suspend; + }; }; }; }; @@ -700,7 +780,7 @@ samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; - vmmc-supply = <&ldo10_reg>; + vmmc-supply = <&ldo18_reg>; vqmmc-supply = <&ldo3_reg>; bus-width = <8>; cap-mmc-highspeed; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 5fb2326875dc..55d4dbf6f83a 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -42,117 +42,119 @@ * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi. */ - soc: soc { - cluster_a15_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - opp-1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1250000>; - clock-latency-ns = <140000>; - }; - opp-1700000000 { - opp-hz = /bits/ 64 <1700000000>; - opp-microvolt = <1212500>; - clock-latency-ns = <140000>; - }; - opp-1600000000 { - opp-hz = /bits/ 64 <1600000000>; - opp-microvolt = <1175000>; - clock-latency-ns = <140000>; - }; - opp-1500000000 { - opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <1137500>; - clock-latency-ns = <140000>; - }; - opp-1400000000 { - opp-hz = /bits/ 64 <1400000000>; - opp-microvolt = <1112500>; - clock-latency-ns = <140000>; - }; - opp-1300000000 { - opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1062500>; - clock-latency-ns = <140000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1037500>; - clock-latency-ns = <140000>; - }; - opp-1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1012500>; - clock-latency-ns = <140000>; - }; - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = < 987500>; - clock-latency-ns = <140000>; - }; - opp-900000000 { - opp-hz = /bits/ 64 <900000000>; - opp-microvolt = < 962500>; - clock-latency-ns = <140000>; - }; - opp-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = < 937500>; - clock-latency-ns = <140000>; - }; - opp-700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = < 912500>; - clock-latency-ns = <140000>; - }; + cluster_a15_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1250000>; + clock-latency-ns = <140000>; + }; + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <1212500>; + clock-latency-ns = <140000>; + }; + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <1175000>; + clock-latency-ns = <140000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1137500>; + clock-latency-ns = <140000>; + }; + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1112500>; + clock-latency-ns = <140000>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <140000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1037500>; + clock-latency-ns = <140000>; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1012500>; + clock-latency-ns = <140000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = < 987500>; + clock-latency-ns = <140000>; + }; + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = < 962500>; + clock-latency-ns = <140000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = < 937500>; + clock-latency-ns = <140000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = < 912500>; + clock-latency-ns = <140000>; }; + }; - cluster_a7_opp_table: opp_table1 { - compatible = "operating-points-v2"; - opp-shared; - opp-1300000000 { - opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1275000>; - clock-latency-ns = <140000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1212500>; - clock-latency-ns = <140000>; - }; - opp-1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1162500>; - clock-latency-ns = <140000>; - }; - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1112500>; - clock-latency-ns = <140000>; - }; - opp-900000000 { - opp-hz = /bits/ 64 <900000000>; - opp-microvolt = <1062500>; - clock-latency-ns = <140000>; - }; - opp-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1025000>; - clock-latency-ns = <140000>; - }; - opp-700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = <975000>; - clock-latency-ns = <140000>; - }; - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <937500>; - clock-latency-ns = <140000>; - }; + cluster_a7_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1275000>; + clock-latency-ns = <140000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1212500>; + clock-latency-ns = <140000>; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1162500>; + clock-latency-ns = <140000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1112500>; + clock-latency-ns = <140000>; + }; + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <140000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1025000>; + clock-latency-ns = <140000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <975000>; + clock-latency-ns = <140000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <937500>; + clock-latency-ns = <140000>; }; + }; + soc: soc { cci: cci@10d20000 { compatible = "arm,cci-400"; #address-cells = <1>; @@ -548,18 +550,6 @@ status = "disabled"; }; - adc: adc@12d10000 { - compatible = "samsung,exynos-adc-v2"; - reg = <0x12D10000 0x100>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_TSADC>; - clock-names = "adc"; - #io-channel-cells = <1>; - io-channel-ranges; - samsung,syscon-phandle = <&pmu_system_controller>; - status = "disabled"; - }; - hsi2c_8: i2c@12e00000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12E00000 0x1000>; @@ -1363,6 +1353,12 @@ }; }; +&adc { + clocks = <&clock CLK_TSADC>; + clock-names = "adc"; + samsung,syscon-phandle = <&pmu_system_controller>; +}; + &dp { clocks = <&clock CLK_DP1>; clock-names = "dp"; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 25d95de15c9b..829147e320e0 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -177,6 +177,10 @@ regulator-name = "vdd_adc"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo5_reg: LDO5 { @@ -184,6 +188,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo6_reg: LDO6 { @@ -191,6 +199,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo7_reg: LDO7 { @@ -198,6 +210,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo8_reg: LDO8 { @@ -205,6 +221,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo9_reg: LDO9 { @@ -212,6 +232,10 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo10_reg: LDO10 { @@ -219,6 +243,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo11_reg: LDO11 { @@ -226,6 +254,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo12_reg: LDO12 { @@ -239,6 +271,10 @@ regulator-name = "vddq_mmc2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo14_reg: LDO14 { @@ -253,6 +289,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo16_reg: LDO16 { @@ -267,18 +307,30 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo18_reg: LDO18 { regulator-name = "vdd_emmc_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo19_reg: LDO19 { regulator-name = "vdd_sd"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo20_reg: LDO20 { @@ -307,6 +359,10 @@ regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo24_reg: LDO24 { @@ -328,6 +384,10 @@ regulator-name = "vdd_ldo26"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <3950000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo27_reg: LDO27 { @@ -335,6 +395,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo28_reg: LDO28 { @@ -342,6 +406,10 @@ regulator-name = "vdd_ldo28"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <3950000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo29_reg: LDO29 { @@ -420,6 +488,10 @@ regulator-max-microvolt = <1300000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck2_reg: BUCK2 { @@ -428,6 +500,10 @@ regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck3_reg: BUCK3 { @@ -436,6 +512,10 @@ regulator-max-microvolt = <1400000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck4_reg: BUCK4 { @@ -444,6 +524,10 @@ regulator-max-microvolt = <1400000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck5_reg: BUCK5 { @@ -460,20 +544,24 @@ regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck7_reg: BUCK7 { - regulator-name = "vdd_1.0v_ldo"; - regulator-min-microvolt = <800000>; + regulator-name = "vdd_1.35v_ldo"; + regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; }; buck8_reg: BUCK8 { - regulator-name = "vdd_1.8v_ldo"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <2000000>; + regulator-name = "vdd_2.0v_ldo"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; regulator-always-on; regulator-boot-on; }; @@ -484,14 +572,20 @@ regulator-max-microvolt = <3750000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck10_reg: BUCK10 { regulator-name = "vdd_vmem"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; - regulator-always-on; - regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 93a48f2dda49..838872037493 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -360,6 +360,12 @@ }; }; +&buck10_reg { + /* Supplies vmmc-supply of mmc_0 */ + regulator-always-on; + regulator-boot-on; +}; + &hdmi { status = "okay"; ddc = <&i2c_2>; diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index ae866bcc30c4..0b27bebf9528 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -96,6 +96,15 @@ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; }; + adc: adc@12d10000 { + compatible = "samsung,exynos-adc-v2"; + reg = <0x12d10000 0x100>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + io-channel-ranges; + status = "disabled"; + }; + /* i2c_0-3 are defined in exynos5.dtsi */ hsi2c_4: i2c@12ca0000 { compatible = "samsung,exynos5250-hsi2c"; diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts index 3613f05f8a80..bfaa2de63a10 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -64,7 +64,7 @@ gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>; gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; num-chipselects = <1>; panel: display@0 { diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi index bf0cb55809f8..4263a9339c2e 100644 --- a/arch/arm/boot/dts/hip04.dtsi +++ b/arch/arm/boot/dts/hip04.dtsi @@ -347,7 +347,7 @@ /* non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell". */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -382,7 +382,7 @@ /* non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell". */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -417,7 +417,7 @@ /* non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell". */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -451,7 +451,7 @@ /* non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell". */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -482,7 +482,7 @@ }; funnel@0,e3c41000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xe3c41000 0 0x1000>; clocks = <&clk_375m>; @@ -531,7 +531,7 @@ }; funnel@0,e3c81000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xe3c81000 0 0x1000>; clocks = <&clk_375m>; @@ -580,7 +580,7 @@ }; funnel@0,e3cc1000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xe3cc1000 0 0x1000>; clocks = <&clk_375m>; @@ -629,7 +629,7 @@ }; funnel@0,e3d01000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xe3d01000 0 0x1000>; clocks = <&clk_375m>; @@ -678,7 +678,7 @@ }; funnel@0,e3c04000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xe3c04000 0 0x1000>; clocks = <&clk_375m>; diff --git a/arch/arm/boot/dts/ibm-power9-dual.dtsi b/arch/arm/boot/dts/ibm-power9-dual.dtsi new file mode 100644 index 000000000000..2abc42eda7b0 --- /dev/null +++ b/arch/arm/boot/dts/ibm-power9-dual.dtsi @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2018 IBM Corp + +&fsi { + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_i2c0: i2c-bus@0 { + reg = <0>; + }; + + cfam0_i2c1: i2c-bus@1 { + reg = <1>; + }; + + cfam0_i2c2: i2c-bus@2 { + reg = <2>; + }; + + cfam0_i2c3: i2c-bus@3 { + reg = <3>; + }; + + cfam0_i2c4: i2c-bus@4 { + reg = <4>; + }; + + cfam0_i2c5: i2c-bus@5 { + reg = <5>; + }; + + cfam0_i2c6: i2c-bus@6 { + reg = <6>; + }; + + cfam0_i2c7: i2c-bus@7 { + reg = <7>; + }; + + cfam0_i2c8: i2c-bus@8 { + reg = <8>; + }; + + cfam0_i2c9: i2c-bus@9 { + reg = <9>; + }; + + cfam0_i2c10: i2c-bus@a { + reg = <10>; + }; + + cfam0_i2c11: i2c-bus@b { + reg = <11>; + }; + + cfam0_i2c12: i2c-bus@c { + reg = <12>; + }; + + cfam0_i2c13: i2c-bus@d { + reg = <13>; + }; + + cfam0_i2c14: i2c-bus@e { + reg = <14>; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ0: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub0: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +&fsi_hub0 { + cfam@1,0 { + reg = <1 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <1>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_i2c0: i2c-bus@0 { + reg = <0>; + }; + + cfam1_i2c1: i2c-bus@1 { + reg = <1>; + }; + + cfam1_i2c2: i2c-bus@2 { + reg = <2>; + }; + + cfam1_i2c3: i2c-bus@3 { + reg = <3>; + }; + + cfam1_i2c4: i2c-bus@4 { + reg = <4>; + }; + + cfam1_i2c5: i2c-bus@5 { + reg = <5>; + }; + + cfam1_i2c6: i2c-bus@6 { + reg = <6>; + }; + + cfam1_i2c7: i2c-bus@7 { + reg = <7>; + }; + + cfam1_i2c8: i2c-bus@8 { + reg = <8>; + }; + + cfam1_i2c9: i2c-bus@9 { + reg = <9>; + }; + + cfam1_i2c10: i2c-bus@a { + reg = <10>; + }; + + cfam1_i2c11: i2c-bus@b { + reg = <11>; + }; + + cfam1_i2c12: i2c-bus@c { + reg = <12>; + }; + + cfam1_i2c13: i2c-bus@d { + reg = <13>; + }; + + cfam1_i2c14: i2c-bus@e { + reg = <14>; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ1: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub1: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +/* Legacy OCC numbering (to get rid of when userspace is fixed) */ +&fsi_occ0 { + reg = <1>; +}; + +&fsi_occ1 { + reg = <2>; +}; + +/ { + aliases { + i2c100 = &cfam0_i2c0; + i2c101 = &cfam0_i2c1; + i2c102 = &cfam0_i2c2; + i2c103 = &cfam0_i2c3; + i2c104 = &cfam0_i2c4; + i2c105 = &cfam0_i2c5; + i2c106 = &cfam0_i2c6; + i2c107 = &cfam0_i2c7; + i2c108 = &cfam0_i2c8; + i2c109 = &cfam0_i2c9; + i2c110 = &cfam0_i2c10; + i2c111 = &cfam0_i2c11; + i2c112 = &cfam0_i2c12; + i2c113 = &cfam0_i2c13; + i2c114 = &cfam0_i2c14; + i2c200 = &cfam1_i2c0; + i2c201 = &cfam1_i2c1; + i2c202 = &cfam1_i2c2; + i2c203 = &cfam1_i2c3; + i2c204 = &cfam1_i2c4; + i2c205 = &cfam1_i2c5; + i2c206 = &cfam1_i2c6; + i2c207 = &cfam1_i2c7; + i2c208 = &cfam1_i2c8; + i2c209 = &cfam1_i2c9; + i2c210 = &cfam1_i2c10; + i2c211 = &cfam1_i2c11; + i2c212 = &cfam1_i2c12; + i2c213 = &cfam1_i2c13; + i2c214 = &cfam1_i2c14; + }; +}; diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts index f0a3fde0739c..10acc5331ba6 100644 --- a/arch/arm/boot/dts/imx53-m53menlo.dts +++ b/arch/arm/boot/dts/imx53-m53menlo.dts @@ -10,6 +10,25 @@ model = "MENLO M53 EMBEDDED DEVICE"; compatible = "menlo,m53menlo", "fsl,imx53"; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pinctrl_power_button>; + pinctrl-names = "default"; + + power-button { + label = "Power button"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pinctrl_power_out>; + pinctrl-names = "default"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -30,7 +49,7 @@ eth { label = "EthLedYe"; gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; + linux,default-trigger = "netdev"; }; }; @@ -45,12 +64,19 @@ }; }; + beeper { + compatible = "gpio-beeper"; + pinctrl-0 = <&pinctrl_beeper>; + gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; + }; + reg_usbh1_vbus: regulator-usbh1-vbus { compatible = "regulator-fixed"; regulator-name = "vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + enable-active-high; }; }; @@ -74,6 +100,25 @@ assigned-clock-rates = <133333334>, <33333334>, <33333334>; }; +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio2 27 GPIO_ACTIVE_HIGH>; + status = "okay"; + + spidev@0 { + compatible = "menlo,m53cpld"; + spi-max-frequency = <25000000>; + reg = <0>; + }; + + spidev@1 { + compatible = "menlo,m53cpld"; + spi-max-frequency = <25000000>; + reg = <1>; + }; +}; + &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; @@ -86,9 +131,82 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; + phy-reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>; status = "okay"; }; +&gpio1 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "TestPin_SV2_3", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "CPLD_JTAG_TDI", "CPLD_JTAG_TMS", "", "", + "", "CPLD_JTAG_TDO", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "CPLD_JTAG_TCK", "KBD_intK", + "CPLD_int", "CPLD_JTAG_internal", "CPLD_D[0]", "CPLD_D[1]", + "CPLD_D[2]", "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]", + "CPLD_D[6]", "CPLD_D[7]", "DISP_reset", "KBD_intI"; +}; + +&gpio6 { + gpio-line-names = + "", "", "", "", + "CPLD_reset", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio7 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "USB-OTG_OverCurrent", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -136,27 +254,37 @@ imx53-m53evk { hoggrp { fsl,pins = < - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4 - MX53_PAD_EIM_EB3__GPIO2_31 0x1d5 - MX53_PAD_PATA_DA_0__GPIO7_6 0x1d5 - MX53_PAD_GPIO_19__CCM_CLKO 0x1d5 - MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK 0x1d5 - MX53_PAD_CSI0_DAT4__GPIO5_22 0x1d5 - MX53_PAD_CSI0_DAT5__GPIO5_23 0x1d5 - MX53_PAD_CSI0_DAT6__GPIO5_24 0x1d5 - MX53_PAD_CSI0_DAT7__GPIO5_25 0x1d5 - MX53_PAD_CSI0_DAT8__GPIO5_26 0x1d5 - MX53_PAD_CSI0_DAT9__GPIO5_27 0x1d5 - MX53_PAD_CSI0_DAT10__GPIO5_28 0x1d5 - MX53_PAD_CSI0_DAT11__GPIO5_29 0x1d5 - MX53_PAD_CSI0_DAT14__GPIO6_0 0x1d5 + MX53_PAD_GPIO_19__CCM_CLKO 0x1e4 + MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1e4 + MX53_PAD_CSI0_DAT4__GPIO5_22 0x1e4 + MX53_PAD_CSI0_DAT5__GPIO5_23 0x1c4 + MX53_PAD_CSI0_DAT6__GPIO5_24 0x1e4 + MX53_PAD_CSI0_DAT7__GPIO5_25 0x1e4 + MX53_PAD_CSI0_DAT8__GPIO5_26 0x1e4 + MX53_PAD_CSI0_DAT9__GPIO5_27 0x1c4 + MX53_PAD_CSI0_DAT10__GPIO5_28 0x1e4 + MX53_PAD_CSI0_DAT11__GPIO5_29 0x1e4 + MX53_PAD_PATA_DATA11__GPIO2_11 0x1e4 + MX53_PAD_EIM_D24__GPIO3_24 0x1e4 + MX53_PAD_EIM_D25__GPIO3_25 0x1e4 + MX53_PAD_EIM_D29__GPIO3_29 0x1e4 + MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1e4 + MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1e4 + MX53_PAD_CSI0_DAT18__GPIO6_4 0x1c4 + MX53_PAD_PATA_DATA8__GPIO2_8 0x1e4 >; }; pinctrl_led: ledgrp { fsl,pins = < - MX53_PAD_CSI0_DAT15__GPIO6_1 0x1d5 - MX53_PAD_CSI0_DAT16__GPIO6_2 0x1d5 + MX53_PAD_CSI0_DAT15__GPIO6_1 0x1c4 + MX53_PAD_CSI0_DAT16__GPIO6_2 0x1c4 + >; + }; + + pinctrl_beeper: beepergrp { + fsl,pins = < + MX53_PAD_CSI0_DAT17__GPIO6_3 0x1c4 >; }; @@ -169,49 +297,66 @@ pinctrl_can2: can2grp { fsl,pins = < - MX53_PAD_KEY_COL4__CAN2_TXCAN 0x1c4 + MX53_PAD_KEY_COL4__CAN2_TXCAN 0x1e4 MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x1c4 >; }; pinctrl_display_gpio: display-gpiogrp { fsl,pins = < - MX53_PAD_CSI0_DAT12__GPIO5_30 0x1d5 /* Reset */ - MX53_PAD_CSI0_DAT13__GPIO5_31 0x1d5 /* Interrupt */ + MX53_PAD_CSI0_DAT12__GPIO5_30 0x1c4 /* Reset */ + MX53_PAD_CSI0_MCLK__GPIO5_19 0x1e4 /* Int-K */ + MX53_PAD_CSI0_DAT13__GPIO5_31 0x1c4 /* Int-I */ + + MX53_PAD_CSI0_DAT14__GPIO6_0 0x1c4 /* Power down */ >; }; pinctrl_edt_ft5x06: edt-ft5x06grp { fsl,pins = < - MX53_PAD_PATA_DATA9__GPIO2_9 0x1d5 /* Reset */ - MX53_PAD_CSI0_DAT19__GPIO6_5 0x1d5 /* Interrupt */ - MX53_PAD_PATA_DATA10__GPIO2_10 0x1d5 /* Wake */ + MX53_PAD_PATA_DATA9__GPIO2_9 0x1e4 /* Reset */ + MX53_PAD_CSI0_DAT19__GPIO6_5 0x1c4 /* Interrupt */ + MX53_PAD_PATA_DATA10__GPIO2_10 0x1e4 /* Wake */ + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX53_PAD_EIM_CS0__ECSPI2_SCLK 0xe4 + MX53_PAD_EIM_OE__ECSPI2_MISO 0xe4 + MX53_PAD_EIM_CS1__ECSPI2_MOSI 0xe4 + MX53_PAD_EIM_RW__GPIO2_26 0xe4 + MX53_PAD_EIM_LBA__GPIO2_27 0xe4 >; }; pinctrl_esdhc1: esdhc1grp { fsl,pins = < - MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 - MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 - MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 - MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 - MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 - MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1e4 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1e4 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1e4 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1e4 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1e4 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1e4 + MX53_PAD_GPIO_1__GPIO1_1 0x1c4 + MX53_PAD_GPIO_9__GPIO1_9 0x1e4 >; }; pinctrl_fec: fecgrp { fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x4 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 + MX53_PAD_FEC_MDC__FEC_MDC 0x1e4 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x1e4 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x1e4 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x1e4 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x1e4 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x1e4 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x1e4 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x1c4 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x1e4 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x1e4 + MX53_PAD_PATA_DA_1__GPIO7_7 0x1e4 + MX53_PAD_EIM_EB3__GPIO2_31 0x1e4 >; }; @@ -240,10 +385,24 @@ >; }; + pinctrl_power_button: powerbutgrp { + fsl,pins = < + MX53_PAD_SD2_DATA2__GPIO1_13 0x1e4 + >; + }; + + pinctrl_power_out: poweroutgrp { + fsl,pins = < + MX53_PAD_SD2_DATA0__GPIO1_15 0x1e4 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 + MX53_PAD_PATA_IORDY__UART1_RTS 0x1e4 + MX53_PAD_PATA_RESET_B__UART1_CTS 0x1e4 >; }; @@ -251,13 +410,25 @@ fsl,pins = < MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 + MX53_PAD_PATA_DIOR__UART2_RTS 0x1e4 + MX53_PAD_PATA_INTRQ__UART2_CTS 0x1e4 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 >; }; pinctrl_usb: usbgrp { fsl,pins = < - MX53_PAD_GPIO_2__GPIO1_2 0x1d5 - MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1d5 + MX53_PAD_GPIO_2__GPIO1_2 0x1c4 + MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1c4 + MX53_PAD_GPIO_4__GPIO1_4 0x1c4 + MX53_PAD_GPIO_18__GPIO7_13 0x1c4 >; }; }; @@ -287,12 +458,21 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + linux,rs485-enabled-at-boot-time; status = "okay"; }; @@ -301,7 +481,7 @@ pinctrl-0 = <&pinctrl_usb>; vbus-supply = <®_usbh1_vbus>; phy_type = "utmi"; - dr_mode = "peripheral"; + dr_mode = "host"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 09071ca11c6c..ec9fb8940ffa 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -185,6 +185,31 @@ >; }; + pinctrl_ipu_csi0: ipucsi0grp { + fsl,pins = < + MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1c4 + MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1c4 + MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1c4 + MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1c4 + MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1c4 + MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1c4 + MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1c4 + MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1c4 + MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1e4 + MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1e4 + MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1e4 + MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1e4 + >; + }; + + pinctrl_ov5642: ov5642grp { + fsl,pins = < + MX53_PAD_NANDF_WP_B__GPIO6_9 0x1e4 + MX53_PAD_NANDF_RB0__GPIO6_10 0x1e4 + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 @@ -256,11 +281,47 @@ camera: ov5642@3c { compatible = "ovti,ov5642"; reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5642>; + assigned-clocks = <&clks IMX5_CLK_SSI_EXT1_SEL>, + <&clks IMX5_CLK_SSI_EXT1_COM_SEL>; + assigned-clock-parents = <&clks IMX5_CLK_PLL2_SW>, + <&clks IMX5_CLK_SSI_EXT1_PODF>; + assigned-clock-rates = <0>, <24000000>; + clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>; + clock-names = "xclk"; + DVDD-supply = <&ldo9_reg>; + AVDD-supply = <&ldo7_reg>; + reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; + + port { + ov5642_to_ipu_csi0: endpoint { + remote-endpoint = <&ipu_csi0_from_parallel_sensor>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; }; pmic: dialog@48 { compatible = "dlg,da9053", "dlg,da9052"; reg = <0x48>; + interrupt-parent = <&gpio7>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + + regulators { + ldo7_reg: ldo7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + }; + + ldo9_reg: ldo9 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3650000>; + }; + }; }; }; @@ -271,3 +332,15 @@ phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; status = "okay"; }; + +&ipu_csi0_from_parallel_sensor { + remote-endpoint = <&ov5642_to_ipu_csi0>; + data-shift = <12>; /* Lines 19:12 used */ + hsync-active = <1>; + vsync-active = <1>; +}; + +&ipu_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_csi0>; +}; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 9b672ed2486d..ed341cfd9d09 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -31,6 +31,7 @@ i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; + ipu0 = &ipu; mmc0 = &esdhc1; mmc1 = &esdhc2; mmc2 = &esdhc3; @@ -71,6 +72,11 @@ ports = <&ipu_di0>, <&ipu_di1>; }; + capture_subsystem { + compatible = "fsl,imx-capture-subsystem"; + ports = <&ipu_csi0>, <&ipu_csi1>; + }; + tzic: tz-interrupt-controller@fffc000 { compatible = "fsl,imx53-tzic", "fsl,tzic"; interrupt-controller; @@ -158,10 +164,16 @@ ipu_csi0: port@0 { reg = <0>; + + ipu_csi0_from_parallel_sensor: endpoint { + }; }; ipu_csi1: port@1 { reg = <1>; + + ipu_csi1_from_parallel_sensor: endpoint { + }; }; ipu_di0: port@2 { diff --git a/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi new file mode 100644 index 000000000000..a864fdbd5f16 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de> + */ + +#include "imx6dl.dtsi" +#include "imx6qdl-kontron-samx6i.dtsi" + +/ { + model = "Kontron SMARC sAMX6i Dual-Lite/Solo"; + compatible = "kontron,imx6dl-samx6i", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi new file mode 100644 index 000000000000..2618eccfe50d --- /dev/null +++ b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de> + */ + +#include "imx6q.dtsi" +#include "imx6qdl-kontron-samx6i.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Kontron SMARC sAMX6i Quad/Dual"; + compatible = "kontron,imx6q-samx6i", "fsl,imx6q"; +}; + +/* Quad/Dual SoMs have 3 chip-select signals */ +&ecspi4 { + fsl,spi-num-chipselects = <3>; + cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>, + <&gpio3 29 GPIO_ACTIVE_HIGH>, + <&gpio3 25 GPIO_ACTIVE_HIGH>; +}; + +&pinctrl_ecspi4 { + fsl,pins = < + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 + + /* SPI4_IMX_CS2# - connected to internal flash */ + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0 + /* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + /* SPI4_CS3# - connected to SMARC SPI0_CS1# */ + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0 + >; +}; diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi new file mode 100644 index 000000000000..81c7ebb4b3fb --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -0,0 +1,815 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Copyright 2017 (C) Priit Laes <plaes@plaes.org> + * Copyright 2018 (C) Pengutronix, Michael Grzeschik <mgr@pengutronix.de> + * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de> + * + * Based on initial work by Nikita Yushchenko <nyushchenko at dev.rtsoft.ru> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> + +/ { + reg_1p0v_s0: regulator-1p0v-s0 { + compatible = "regulator-fixed"; + regulator-name = "V_1V0_S0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_smarc_suppy>; + }; + + reg_1p35v_vcoredig_s5: regulator-1p35v-vcoredig-s5 { + compatible = "regulator-fixed"; + regulator-name = "V_1V35_VCOREDIG_S5"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_3p3v_s5>; + }; + + reg_1p8v_s5: regulator-1p8v-s5 { + compatible = "regulator-fixed"; + regulator-name = "V_1V8_S5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_3p3v_s5>; + }; + + reg_3p3v_s0: regulator-3p3v-s0 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_S0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_3p3v_s5>; + }; + + reg_3p3v_s0: regulator-3p3v-s0 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_S0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_3p3v_s5>; + }; + + reg_3p3v_s5: regulator-3p3v-s5 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_S5"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_smarc_suppy>; + }; + + reg_smarc_lcdbklt: regulator-smarc-lcdbklt { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdbklt_en>; + regulator-name = "LCD_BKLT_EN"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_smarc_lcdvdd: regulator-smarc-lcdvdd { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdvdd_en>; + regulator-name = "LCD_VDD_EN"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_smarc_rtc: regulator-smarc-rtc { + compatible = "regulator-fixed"; + regulator-name = "V_IN_RTC_BATT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + /* Module supply range can be 3.00V ... 5.25V */ + reg_smarc_suppy: regulator-smarc-supply { + compatible = "regulator-fixed"; + regulator-name = "V_IN_WIDE"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + lcd: lcd { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + status = "disabled"; + + port@0 { + reg = <0>; + + lcd_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + + lcd_out: endpoint { + }; + }; + }; + + lcd_backlight: lcd-backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + pwm-names = "LCD_BKLT_PWM"; + + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <4>; + + power-supply = <®_smarc_lcdbklt>; + status = "disabled"; + }; + + i2c_intern: i2c-gpio-intern { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio_intern>; + sda-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c_lcd: i2c-gpio-lcd { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio_lcd>; + sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabld"; + }; + + i2c_cam: i2c-gpio-cam { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio_cam>; + sda-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabld"; + }; +}; + +/* I2S0, I2S1 */ +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + + audmux_ssi1 { + fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT3) | + IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT3) | + IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT3) + >; + }; + + audmux_adu3 { + fsl,audmux-port = <MX51_AUDMUX_PORT3>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0) + >; + }; + + audmux_ssi2 { + fsl,audmux-port = <MX51_AUDMUX_PORT2_SSI1>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) | + IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) | + IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4) + >; + }; + + audmux_adu4 { + fsl,audmux-port = <MX51_AUDMUX_PORT4>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT2_SSI1) + >; + }; +}; + +/* CAN0 */ +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; +}; + +/* CAN1 */ +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; +}; + +/* SPI1 */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, + <&gpio2 27 GPIO_ACTIVE_HIGH>; +}; + +/* SPI0 */ +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>, + <&gpio3 29 GPIO_ACTIVE_HIGH>; + status = "okay"; + + /* default boot source: workaround #1 for errata ERR006282 */ + smarc_flash: spi-flash@0 { + compatible = "winbond,w25q16dw", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +/* GBE */ +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; +}; + +&i2c_intern { + pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + reg_v_core_s0: sw1ab { + regulator-name = "V_CORE_S0"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vddsoc_s0: sw1c { + regulator-name = "V_VDDSOC_S0"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p15v_s0: sw2 { + regulator-name = "V_3V15_S0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* sw3a/b is used in dual mode, but driver does not + * support it. Although, there's no need to control + * DDR power - so just leaving dummy entries for sw3a + * and sw3b for now. + */ + sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1p8v_s0: sw4 { + regulator-name = "V_1V8_S0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* Regulator for USB */ + reg_5p0v_s0: swbst { + regulator-name = "V_5V0_S0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-boot-on; + }; + + reg_vsnvs: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vrefddr: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + /* + * Per schematics, of all VGEN's, only VGEN5 has some + * usage ... but even that - over DNI resistor + */ + vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + reg_2p5v_s0: vgen5 { + regulator-name = "V_2V5_S0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +/* I2C_GP */ +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; +}; + +/* HDMI_CTRL */ +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; +}; + +/* I2C_PM */ +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + smarc_eeprom: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mgmt_gpios &pinctrl_gpio>; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x130b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + + /* AUDIO MCLK */ + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x000b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0 /* CS0 */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 /* CS1 */ + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 + + /* SPI_IMX_CS2# - connected to internal flash */ + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0 + /* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b0 /* GPIO0 / CAM0_PWR# */ + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b0b0 /* GPIO1 / CAM1_PWR# */ + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b0 /* GPIO2 / CAM0_RST# */ + MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b0b0 /* GPIO3 / CAM1_RST# */ + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b0 /* GPIO4 / HDA_RST# */ + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b0 /* GPIO5 / PWM_OUT */ + MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b0b0 /* GPIO6 / TACHIN */ + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b0 /* GPIO7 / PCAM_FLD */ + MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b0b0 /* GPIO8 / CAN0_ERR# */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b0b0 /* GPIO9 / CAN1_ERR# */ + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b0b0 /* GPIO10 */ + MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b0b0 /* GPIO11 */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* RST_GBE0_PHY# */ + >; + }; + + pinctrl_i2c_gpio_cam: i2c-gpiocamgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* SCL */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* SDA */ + >; + }; + + pinctrl_i2c_gpio_intern: i2c-gpiointerngrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* SCL */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* SDA */ + >; + }; + + pinctrl_i2c_gpio_lcd: i2c-gpiolcdgrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 /* SCL */ + MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0 /* SDA */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100f1 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100f1 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100f1 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100f1 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100f1 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100f1 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100f1 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100f1 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100f1 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100f1 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100f1 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100f1 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100f1 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100f1 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100f1 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100f1 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100f1 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100f1 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x100f1 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x100f1 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x100f1 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x100f1 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x100f1 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x100f1 + + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f1 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100f1 /* DE */ + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100f1 /* HSYNC */ + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100f1 /* VSYNC */ + >; + }; + + pinctrl_lcdbklt_en: lcdbkltengrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b1 + >; + }; + + pinctrl_lcdvdd_en: lcdvddengrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 + >; + }; + + pinctrl_mipi_csi: mipi-csigrp { + fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x000b0 /* CSI0/1 MCLK */ + >; + }; + + pinctrl_mgmt_gpios: mgmt-gpiosgrp { + fsl,pins = < + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0 /* LID# */ + MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x1b0b0 /* SLEEP# */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /* CHARGING# */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* CHARGER_PRSNT# */ + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x1b0b0 /* CARRIER_STBY# */ + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 /* BATLOW# */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b0 /* TEST# */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 /* VDD_IO_SEL_D# */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 /* POWER_BTN# */ + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x1b0b0 /* PCI_A_PRSNT# */ + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0 /* RST_PCIE_A# */ + MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 /* PCIE_WAKE# */ + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1f8b0 + /* power, oc muxed but not used by the driver */ + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 /* USB power */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 /* USB OC */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x17059 + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 /* CD */ + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 /* WP */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PWR_EN */ + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + + pinctrl_wdog1: wdog1rp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0 + >; + }; +}; + +&mipi_csi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mipi_csi>; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>; +}; + +/* LCD_BKLT_PWM */ +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; +}; + +®_arm { + vin-supply = <®_v_core_s0>; +}; + +®_pu { + vin-supply = <®_vddsoc_s0>; +}; + +®_soc { + vin-supply = <®_vddsoc_s0>; +}; + +/* SER0 */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; +}; + +/* SER1 */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; +}; + +/* SER2 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + uart-has-rtscts; +}; + +/* SER3 */ +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; +}; + +/* USB0 */ +&usbotg { + /* + * no 'imx6-usb-charger-detection' + * since USB_OTG_CHD_B pin is not wired + */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; +}; + +/* USB1/2 via hub */ +&usbh1 { + vbus-supply = <®_5p0v_s0>; +}; + +/* SDIO */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + no-1-8-v; +}; + +/* SDMMC */ +&usdhc4 { + /* Internal eMMC, optional on some boards */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + vmmc-supply = <®_3p3v_s0>; + vqmmc-supply = <®_1p8v_s0>; +}; + +&wdog1 { + /* CPLD is feeded by watchdog (hardwired) */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 185fb17a3500..71ca76a5e4a5 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -745,10 +745,26 @@ vin-supply = <&sw1c_reg>; }; +®_vdd1p1 { + vin-supply = <&vgen5_reg>; +}; + +®_vdd3p0 { + vin-supply = <&sw2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&vgen5_reg>; +}; + &snvs_poweroff { status = "okay"; }; +&snvs_pwrkey { + status = "okay"; +}; + &ssi2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index b3a77bcf00d5..4b801935cad1 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -675,14 +675,14 @@ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_DUMMY>; + clocks = <&clks IMX6QDL_CLK_IPG>; }; wdog2: wdog@20c0000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_DUMMY>; + clocks = <&clks IMX6QDL_CLK_IPG>; status = "disabled"; }; @@ -701,7 +701,7 @@ <0 54 IRQ_TYPE_LEVEL_HIGH>, <0 127 IRQ_TYPE_LEVEL_HIGH>; - regulator-1p1 { + reg_vdd1p1: regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <1000000>; @@ -716,7 +716,7 @@ anatop-enable-bit = <0>; }; - regulator-3p0 { + reg_vdd3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -731,7 +731,7 @@ anatop-enable-bit = <0>; }; - regulator-2p5 { + reg_vdd2p5: regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2250000>; @@ -841,6 +841,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; snvs_lpgpr: snvs-lpgpr { diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index f7a48e4622e1..4829aa682aeb 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -580,6 +580,18 @@ status = "okay"; }; +®_vdd1p1 { + vin-supply = <&sw2_reg>; +}; + +®_vdd3p0 { + vin-supply = <&sw2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&sw2_reg>; +}; + &snvs_poweroff { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 9ddbeea64b72..b36fc012ff06 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -495,7 +495,7 @@ compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_DUMMY>; + clocks = <&clks IMX6SL_CLK_IPG>; status = "disabled"; }; @@ -503,14 +503,14 @@ compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_DUMMY>; + clocks = <&clks IMX6SL_CLK_IPG>; }; wdog2: wdog@20c0000 { compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_DUMMY>; + clocks = <&clks IMX6SL_CLK_IPG>; status = "disabled"; }; @@ -531,7 +531,7 @@ <0 54 IRQ_TYPE_LEVEL_HIGH>, <0 127 IRQ_TYPE_LEVEL_HIGH>; - regulator-1p1 { + reg_vdd1p1: regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <1000000>; @@ -546,7 +546,7 @@ anatop-enable-bit = <0>; }; - regulator-3p0 { + reg_vdd3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -561,7 +561,7 @@ anatop-enable-bit = <0>; }; - regulator-2p5 { + reg_vdd2p5: regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2250000>; diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts index 4a31a415f88e..3e1d32fdf4b8 100644 --- a/arch/arm/boot/dts/imx6sll-evk.dts +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -265,6 +265,18 @@ status = "okay"; }; +®_3p0 { + vin-supply = <&sw2_reg>; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index 1b4899f0fcde..b0a77ff70b67 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -568,6 +568,7 @@ regmap = <&snvs>; offset = <0x38>; mask = <0x61>; + status = "disabled"; }; snvs_pwrkey: snvs-powerkey { @@ -576,6 +577,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index 00c485482301..f1830ed387a5 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -154,3 +154,19 @@ enable-active-high; vin-supply = <®_can_en>; }; + +®_vdd1p1 { + vin-supply = <&vgen6_reg>; +}; + +®_vdd3p0 { + vin-supply = <&sw2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&vgen6_reg>; +}; + +&snvs_pwrkey { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 998e3e13a005..a8ee7087af5a 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -137,7 +137,23 @@ vin-supply = <&sw1a_reg>; }; +®_vdd1p1 { + vin-supply = <&vgen6_reg>; +}; + +®_vdd3p0 { + vin-supply = <&sw2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&vgen6_reg>; +}; + ®_can_stby { /* Transceiver EN/STBY is active low on RevB board */ gpio = <&gpio4 27 GPIO_ACTIVE_LOW>; }; + +&snvs_pwrkey { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts index db0feb9b9f5d..205ea26484e3 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts index 5c7a2bb9141c..5817b4985391 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -53,3 +16,11 @@ reg = <0x80000000 0x40000000>; }; }; + +&i2c4 { /* Onboard Motion sensors */ + status = "okay"; +}; + +&uart3 { /* Bluetooth */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts index 13dfe2afaba5..96f4d89848a3 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -68,3 +31,11 @@ }; }; }; + +&i2c4 { /* Onboard Motion sensors */ + status = "okay"; +}; + +&uart3 { /* Bluetooth */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi index 53b3eac94f0d..25d4aa985a69 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi +++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "imx6sx.dtsi" @@ -107,18 +70,6 @@ startup-delay-us = <70000>; enable-active-high; }; - - reg_bt: regulator-bt { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_bt_reg>; - enable-active-high; - gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>; - regulator-name = "bt_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; }; &fec1 { @@ -225,6 +176,20 @@ }; }; +&i2c2 { /* Brick snap in sensors connector */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c4 { /* Onboard Motion sensors */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + clock-frequency = <100000>; + status = "disabled"; +}; + &iomuxc { pinctrl_bt_reg: btreggrp { fsl,pins = @@ -256,6 +221,18 @@ <MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1>; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1>, + <MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1>; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = + <MX6SX_PAD_USB_H_DATA__I2C4_SDA 0x4001b8b1>, + <MX6SX_PAD_USB_H_STROBE__I2C4_SCL 0x4001b8b1>; + }; + pinctrl_uart1: uart1grp { fsl,pins = <MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1>, @@ -354,11 +331,19 @@ status = "disabled"; }; -&uart3 { /* Bluetooth */ +&uart3 { /* Bluetooth - only on Extended/Full versions */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; uart-has-rtscts; - status = "okay"; + status = "disabled"; + + bluetooth { + compatible = "ti,wl1831-st"; + enable-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_reg>; + max-speed = <921600>; + }; }; /* Arduino serial */ diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index b16a123990a2..bb25add90f19 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -600,7 +600,7 @@ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - regulator-1p1 { + reg_vdd1p1: regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <1000000>; @@ -615,7 +615,7 @@ anatop-enable-bit = <0>; }; - regulator-3p0 { + reg_vdd3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -630,7 +630,7 @@ anatop-enable-bit = <0>; }; - regulator-2p5 { + reg_vdd2p5: regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2250000>; @@ -738,6 +738,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index 9207d5d071f1..cbe61b61a212 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -238,6 +238,10 @@ status = "okay"; }; +&snvs_pwrkey { + status = "okay"; +}; + &tsc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tsc>; diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts index bc77f26a2f1d..21ddd359d3ed 100644 --- a/arch/arm/boot/dts/imx6ul-geam.dts +++ b/arch/arm/boot/dts/imx6ul-geam.dts @@ -169,7 +169,7 @@ display = <&display0>; status = "okay"; - display0: display { + display0: display0 { bits-per-pixel = <16>; bus-width = <18>; diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi index 213e802bf35c..b26d4f57c655 100644 --- a/arch/arm/boot/dts/imx6ul-isiot.dtsi +++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi @@ -161,7 +161,7 @@ display = <&display0>; status = "okay"; - display0: display { + display0: display0 { bits-per-pixel = <16>; bus-width = <18>; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index a7f6d1d58e20..81d4b4925127 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -59,6 +59,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; + clock-frequency = <696000000>; clock-latency = <61036>; /* two CLK32 periods */ #cooling-cells = <2>; operating-points = < @@ -649,6 +650,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; snvs_lpgpr: snvs-lpgpr { @@ -856,6 +858,8 @@ <&clks IMX6UL_CLK_USDHC1>, <&clks IMX6UL_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; + fsl,tuning-step= <2>; + fsl,tuning-start-tap = <20>; bus-width = <4>; status = "disabled"; }; @@ -869,6 +873,8 @@ <&clks IMX6UL_CLK_USDHC2>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-step= <2>; + fsl,tuning-start-tap = <20>; status = "disabled"; }; @@ -962,6 +968,14 @@ status = "disabled"; }; + pxp: pxp@21cc000 { + compatible = "fsl,imx6ul-pxp"; + reg = <0x021cc000 0x4000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_PXP>; + clock-names = "axi"; + }; + qspi: spi@21e0000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi index 006690ea98c0..b6147c76d159 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi @@ -145,13 +145,20 @@ }; &usdhc1 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>; - no-1-8-v; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>; + pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_sleep_cd>; cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; disable-wp; wakeup-source; keep-power-in-suspend; vmmc-supply = <®_3v3>; + vqmmc-supply = <®_sd1_vmmc>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 9ad1da159768..d56728f03c35 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -545,6 +545,12 @@ >; }; + pinctrl_snvs_usdhc1_sleep_cd: snvs-usdhc1-cd-grp-slp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0 + >; + }; + pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp { fsl,pins = < MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x14 diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi index 22e4a307fa59..b7e67d121322 100644 --- a/arch/arm/boot/dts/imx6ull.dtsi +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -12,6 +12,7 @@ /delete-node/ &crypto; &cpu0 { + clock-frequency = <900000000>; operating-points = < /* kHz uV */ 900000 1275000 @@ -34,6 +35,12 @@ compatible = "fsl,imx6ull-ocotp", "syscon"; }; +&pxp { + compatible = "fsl,imx6ull-pxp"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; +}; + &usdhc1 { compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc"; }; diff --git a/arch/arm/boot/dts/imx7d-meerkat96.dts b/arch/arm/boot/dts/imx7d-meerkat96.dts new file mode 100644 index 000000000000..5339210b63d0 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-meerkat96.dts @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Linaro Ltd. + */ + +/dts-v1/; + +#include "imx7d.dtsi" + +/ { + model = "96Boards Meerkat96 Board"; + compatible = "novtech,imx7d-meerkat96", "fsl,imx7d"; + + chosen { + stdout-path = &uart6; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512MB */ + }; + + reg_wlreg_on: regulator-wlreg-on { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlreg_on>; + regulator-name = "wlreg_on"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100>; + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led1 { + label = "green:user1"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led2 { + label = "green:user2"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led3 { + label = "green:user3"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led4 { + label = "green:user4"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + + led5 { + label = "yellow:wlan"; + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + led6 { + label = "blue:bt"; + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + uart-has-rtscts; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7 &pinctrl_bt_gpios>; + assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + uart-has-rtscts; + fsl,dte-mode; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + device-wakeup-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; + }; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + keep-power-in-suspend; + tuning-step = <2>; + vmmc-supply = <®_3p3v>; + no-1-8-v; + broken-cd; + status = "okay"; +}; + +&usdhc3 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <4>; + no-1-8-v; + no-mmc; + non-removable; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_wlreg_on>; + vqmmc-supply =<®_3p3v>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_irq>; + interrupt-parent = <&gpio6>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + +&iomuxc { + pinctrl_bt_gpios: btgpiosgrp { + fsl,pins = < + MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x59 + MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x1f + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 + MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x59 + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x59 + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x59 + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59 + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA 0x4000007f + MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL 0x4000007f + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f + MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f + >; + }; + + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 + MX7D_PAD_LCD_CLK__LCD_CLK 0x79 + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + MX7D_PAD_LCD_RESET__LCD_RESET 0x79 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX7D_PAD_SD3_DATA4__UART3_DCE_RX 0x79 + MX7D_PAD_SD3_DATA5__UART3_DCE_TX 0x79 + MX7D_PAD_SD3_DATA6__UART3_DCE_RTS 0x79 + MX7D_PAD_SD3_DATA7__UART3_DCE_CTS 0x79 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX7D_PAD_SD1_CD_B__UART6_DCE_RX 0x79 + MX7D_PAD_SD1_WP__UART6_DCE_TX 0x79 + >; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = < + MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX 0x79 + MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX 0x79 + MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS 0x79 + MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS 0x79 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x0D + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + >; + }; + + pinctrl_wlan_irq: wlanirqgrp { + fsl,pins = < + MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 0x19 + >; + }; + + pinctrl_wlreg_on: wlregongrp { + fsl,pins = < + MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15 0x19 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 202922ed3754..869efbc4af42 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -263,8 +263,8 @@ }; sw2_reg: sw2 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; @@ -379,6 +379,18 @@ status = "okay"; }; +®_1p0d { + vin-supply = <&sw2_reg>; +}; + +®_1p2 { + vin-supply = <&sw2_reg>; +}; + +&snvs_pwrkey { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts index 3e467a94e8a6..4a78ddc7513d 100644 --- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts +++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts @@ -16,7 +16,7 @@ compatible = "zii,imx7d-rpu2", "fsl,imx7d"; chosen { - stdout-path = &uart1; + stdout-path = &uart2; }; cs2000_ref: oscillator { @@ -775,13 +775,6 @@ >; }; - pinctrl_i2c1_gpio: i2c1gpiogrp { - fsl,pins = < - MX7D_PAD_I2C1_SDA__GPIO4_IO9 0x4000007f - MX7D_PAD_I2C1_SCL__GPIO4_IO8 0x4000007f - >; - }; - pinctrl_i2c2: i2c2grp { fsl,pins = < MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f @@ -789,13 +782,6 @@ >; }; - pinctrl_i2c2_gpio: i2c2gpiogrp { - fsl,pins = < - MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x4000007f - MX7D_PAD_I2C2_SCL__GPIO4_IO10 0x4000007f - >; - }; - pinctrl_i2c3: i2c3grp { fsl,pins = < MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index f33b560821b8..42528d2812a2 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -12,6 +12,8 @@ clock-frequency = <996000000>; operating-points-v2 = <&cpu0_opp_table>; #cooling-cells = <2>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; cpu1: cpu@1 { @@ -39,15 +41,23 @@ opp-792000000 { opp-hz = /bits/ 64 <792000000>; - opp-microvolt = <975000>; + opp-microvolt = <1000000>; clock-latency-ns = <150000>; + opp-supported-hw = <0xf>, <0xf>; }; opp-996000000 { opp-hz = /bits/ 64 <996000000>; - opp-microvolt = <1075000>; + opp-microvolt = <1100000>; clock-latency-ns = <150000>; - opp-suspend; + opp-supported-hw = <0xc>, <0xf>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1225000>; + clock-latency-ns = <150000>; + opp-supported-hw = <0x8>, <0xf>; }; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 106711d2c01b..c1a4fff5ceda 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -117,7 +117,7 @@ * non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell" */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -175,7 +175,7 @@ ranges; funnel@30041000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x30041000 0x1000>; clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; @@ -217,7 +217,7 @@ }; funnel@30083000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x30083000 0x1000>; clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; @@ -551,6 +551,10 @@ tempmon_temp_grade: temp-grade@10 { reg = <0x10 0x4>; }; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 0x4>; + }; }; anatop: anatop@30360000 { @@ -609,6 +613,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/imx7ulp-evk.dts index a09026a6d22e..4245b33bb451 100644 --- a/arch/arm/boot/dts/imx7ulp-evk.dts +++ b/arch/arm/boot/dts/imx7ulp-evk.dts @@ -22,6 +22,25 @@ reg = <0x60000000 0x40000000>; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&tpm4 1 50000 0>; + brightness-levels = <0 20 25 30 35 40 100>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_vbus>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio_ptc 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_vsd_3v3: regulator-vsd-3v3 { compatible = "regulator-fixed"; regulator-name = "VSD_3V3"; @@ -40,6 +59,23 @@ status = "okay"; }; +&tpm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_id>; + srp-disable; + hnp-disable; + adp-disable; + over-current-active-low; + status = "okay"; +}; + &usdhc0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc0>; @@ -57,6 +93,25 @@ bias-pull-up; }; + pinctrl_pwm0: pwm0grp { + fsl,pins = < + IMX7ULP_PAD_PTF2__TPM4_CH1 0x2 + >; + }; + + pinctrl_usbotg1_vbus: otg1vbusgrp { + fsl,pins = < + IMX7ULP_PAD_PTC0__PTC0 0x20000 + >; + }; + + pinctrl_usbotg1_id: otg1idgrp { + fsl,pins = < + IMX7ULP_PAD_PTC13__USB0_ID 0x10003 + IMX7ULP_PAD_PTC16__USB1_OC2 0x10003 + >; + }; + pinctrl_usdhc0: usdhc0grp { fsl,pins = < IMX7ULP_PAD_PTD1__SDHC0_CMD 0x43 diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index e20483714be5..992747a57442 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -30,6 +30,7 @@ serial1 = &lpuart5; serial2 = &lpuart6; serial3 = &lpuart7; + usbphy0 = &usbphy1; }; cpus { @@ -147,6 +148,16 @@ status = "disabled"; }; + tpm4: pwm@40250000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x40250000 0x1000>; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; + clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>; + #pwm-cells = <3>; + status = "disabled"; + }; + tpm5: tpm@40260000 { compatible = "fsl,imx7ulp-tpm"; reg = <0x40260000 0x1000>; @@ -156,6 +167,33 @@ clock-names = "ipg", "per"; }; + usbotg1: usb@40330000 { + compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb"; + reg = <0x40330000 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_USB0>; + phys = <&usbphy1>; + fsl,usbmisc = <&usbmisc1 0>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x8>; + rx-burst-size-dword = <0x8>; + status = "disabled"; + }; + + usbmisc1: usbmisc@40330200 { + compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x40330200 0x200>; + }; + + usbphy1: usb-phy@0x40350000 { + compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy"; + reg = <0x40350000 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>; + #phy-cells = <0>; + }; + usdhc0: mmc@40370000 { compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; reg = <0x40370000 0x10000>; diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi index 1612a869a4f7..602f74d2c758 100644 --- a/arch/arm/boot/dts/integrator.dtsi +++ b/arch/arm/boot/dts/integrator.dtsi @@ -62,6 +62,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x24000000 0x02000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; fpga { diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index e2b1ab9b56e5..ae75a1db3d9a 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -87,7 +87,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; + gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; gpios-states = <1>; states = <3300000 1 1800000 0>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts new file mode 100644 index 000000000000..07ac99b9cda6 --- /dev/null +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +/* + * There are two types of 4.3" LCD, Type 15 and Type 28. + * By default, type 15 was used. This device tree file + * uses the timing for the type 28 LCD + */ + +#include "logicpd-torpedo-37xx-devkit.dts" + +&lcd0 { + + label = "28"; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <2>; + hsync-len = <42>; + vback-porch = <3>; + vfront-porch = <2>; + vsync-len = <11>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; +}; diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts new file mode 100644 index 000000000000..5b7689094b70 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-tsn.dts @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright 2016-2018 NXP Semiconductors + * Copyright 2019 Vladimir Oltean <olteanv@gmail.com> + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "NXP LS1021A-TSN Board"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_vdda_codec: regulator-3V3 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vddio_codec: regulator-2V5 { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; + + /* ADG704BRMZ 1:4 SPI mux/demux */ + sja1105: ethernet-switch@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,sja1105t"; + /* 12 MHz */ + spi-max-frequency = <12000000>; + /* Sample data on trailing clock edge */ + spi-cpha; + /* SPI controller settings for SJA1105 timing requirements */ + fsl,spi-cs-sck-delay = <1000>; + fsl,spi-sck-cs-delay = <1000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + /* ETH5 written on chassis */ + label = "swp5"; + phy-handle = <&rgmii_phy6>; + phy-mode = "rgmii-id"; + reg = <0>; + }; + + port@1 { + /* ETH2 written on chassis */ + label = "swp2"; + phy-handle = <&rgmii_phy3>; + phy-mode = "rgmii-id"; + reg = <1>; + }; + + port@2 { + /* ETH3 written on chassis */ + label = "swp3"; + phy-handle = <&rgmii_phy4>; + phy-mode = "rgmii-id"; + reg = <2>; + }; + + port@3 { + /* ETH4 written on chassis */ + label = "swp4"; + phy-handle = <&rgmii_phy5>; + phy-mode = "rgmii-id"; + reg = <3>; + }; + + port@4 { + /* Internal port connected to eth2 */ + ethernet = <&enet2>; + phy-mode = "rgmii"; + reg = <4>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&enet0 { + tbi-handle = <&tbi0>; + phy-handle = <&sgmii_phy2>; + phy-mode = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy1>; + phy-mode = "sgmii"; + status = "okay"; +}; + +/* RGMII delays added via PCB traces */ +&enet2 { + phy-mode = "rgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&esdhc { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + /* 3 axis accelerometer */ + accelerometer@1e { + compatible = "fsl,fxls8471"; + position = <0>; + reg = <0x1e>; + }; + + /* Audio codec (SAI2) */ + audio-codec@2a { + compatible = "fsl,sgtl5000"; + VDDIO-supply = <®_vddio_codec>; + VDDA-supply = <®_vdda_codec>; + #sound-dai-cells = <0>; + clocks = <&sys_mclk>; + reg = <0x2a>; + }; + + /* Current sensing circuit for 1V VDDCORE PMIC rail */ + current-sensor@44 { + compatible = "ti,ina220"; + shunt-resistor = <1000>; + reg = <0x44>; + }; + + /* Current sensing circuit for 12V VCC rail */ + current-sensor@45 { + compatible = "ti,ina220"; + shunt-resistor = <1000>; + reg = <0x45>; + }; + + /* Thermal monitor - case */ + temperature-sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + /* Thermal monitor - chip */ + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + }; + + /* Unsupported devices: + * - FXAS21002C Gyroscope at 0x20 + * - TI ADS7924 4-channel ADC at 0x49 + */ +}; + +&ifc { + status = "disabled"; +}; + +&lpuart0 { + status = "okay"; +}; + +&lpuart3 { + status = "okay"; +}; + +&mdio0 { + /* AR8031 */ + sgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + /* AR8031 */ + sgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + /* BCM5464 quad PHY */ + rgmii_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + rgmii_phy4: ethernet-phy@4 { + reg = <0x4>; + }; + + rgmii_phy5: ethernet-phy@5 { + reg = <0x5>; + }; + + rgmii_phy6: ethernet-phy@6 { + reg = <0x6>; + }; + + /* SGMII PCS for enet0 */ + tbi0: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&mdio1 { + /* SGMII PCS for enet1 */ + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&qspi { + status = "okay"; + + flash@0 { + /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */ + compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s"; + spi-max-frequency = <20000000>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RCW"; + reg = <0x0 0x40000>; + }; + + partition@40000 { + label = "U-Boot"; + reg = <0x40000 0x300000>; + }; + + partition@340000 { + label = "U-Boot Env"; + reg = <0x340000 0x100000>; + }; + }; + }; +}; + +&sai2 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 8841783aceec..c4447f6c8b2c 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2014 Carlo Caione <carlo@caione.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts index 997e69c5963e..98e1c94c0261 100644 --- a/arch/arm/boot/dts/meson6-atv1200.dts +++ b/arch/arm/boot/dts/meson6-atv1200.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2014 Carlo Caione <carlo@caione.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi index 65585255910a..2d31b7ce3f8c 100644 --- a/arch/arm/boot/dts/meson6.dtsi +++ b/arch/arm/boot/dts/meson6.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2014 Carlo Caione <carlo@caione.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "meson.dtsi" diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts index 8686abd5de7f..61ec929ab86e 100644 --- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts +++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2014 Beniamino Galvani <b.galvani@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 40c11b6b217a..5a7e3e5caebe 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -1,46 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2014 Carlo Caione <carlo@caione.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/meson8b-clkc.h> @@ -228,6 +188,28 @@ }; }; + mmcbus: bus@c8000000 { + compatible = "simple-bus"; + reg = <0xc8000000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc8000000 0x8000>; + + dmcbus: bus@6000 { + compatible = "simple-bus"; + reg = <0x6000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x400>; + + canvas: video-lut@20 { + compatible = "amlogic,meson8-canvas", + "amlogic,canvas"; + reg = <0x20 0x14>; + }; + }; + }; + apb: bus@d0000000 { compatible = "simple-bus"; reg = <0xd0000000 0x200000>; diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts index 9bf4249cb60d..96d239d8334e 100644 --- a/arch/arm/boot/dts/meson8b-ec100.dts +++ b/arch/arm/boot/dts/meson8b-ec100.dts @@ -234,10 +234,6 @@ phy-handle = <ð_phy0>; phy-mode = "rmii"; - snps,reset-gpio = <&gpio GPIOH_4 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -246,6 +242,11 @@ eth_phy0: ethernet-phy@0 { /* IC Plus IP101A/G (0x02430c54) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; + icplus,select-interrupt; interrupt-parent = <&gpio_intc>; /* GPIOH_3 */ diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts index 08ddd7fb0bf8..bb27b34eb346 100644 --- a/arch/arm/boot/dts/meson8b-mxq.dts +++ b/arch/arm/boot/dts/meson8b-mxq.dts @@ -1,50 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2015 Endless Mobile, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + #include "meson8b.dtsi" / { @@ -63,6 +26,127 @@ device_type = "memory"; reg = <0x40000000 0x40000000>; }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&saradc 8>; + }; + + vcck: regulator-vcck { + compatible = "pwm-regulator"; + + regulator-name = "VCCK"; + regulator-min-microvolt = <860000>; + regulator-max-microvolt = <1140000>; + + pwms = <&pwm_cd 0 1148 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&vcc_3v3>; + }; + + vcc_3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&vcc_5v>; + }; + + vcc_5v: regulator-vcc5v { + compatible = "regulator-fixed"; + + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + regulator-boot-on; + regulator-always-on; + }; +}; + +&cpu0 { + cpu-supply = <&vcck>; +}; + +ðmac { + status = "okay"; + + pinctrl-0 = <ð_rmii_pins>; + pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* IC Plus IP101A/G (0x02430c54) */ + reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; + + icplus,select-interrupt; + interrupt-parent = <&gpio_intc>; + /* GPIOH_3 */ + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8>; +}; + +&sdio { + status = "okay"; + + pinctrl-0 = <&sd_b_pins>; + pinctrl-names = "default"; + + /* SD card */ + sd_card_slot: slot@1 { + compatible = "mmc-slot"; + reg = <1>; + status = "okay"; + + bus-width = <4>; + no-sdio; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vcc_3v3>; + }; +}; + +&pwm_cd { + status = "okay"; + pinctrl-0 = <&pwm_c1_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_XTAL>; + clock-names = "clkin0"; }; &uart_AO { @@ -70,3 +154,19 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&usb0 { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index f3ad9397f670..86c4614e0a38 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -1,47 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2015 Endless Mobile, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -216,10 +176,6 @@ ðmac { status = "okay"; - snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 30000>; - pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; @@ -235,6 +191,11 @@ /* Realtek RTL8211F (0x001cc916) */ eth_phy: ethernet-phy@0 { reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* GPIOH_3 */ interrupts = <17 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index ec67f49116d9..fba2c70c2fda 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -1,47 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2015 Endless Mobile, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/meson8b-clkc.h> @@ -205,6 +165,28 @@ }; }; + mmcbus: bus@c8000000 { + compatible = "simple-bus"; + reg = <0xc8000000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc8000000 0x8000>; + + dmcbus: bus@6000 { + compatible = "simple-bus"; + reg = <0x6000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x400>; + + canvas: video-lut@48 { + compatible = "amlogic,meson8b-canvas", + "amlogic,canvas"; + reg = <0x48 0x14>; + }; + }; + }; + apb: bus@d0000000 { compatible = "simple-bus"; reg = <0xd0000000 0x200000>; diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts index 29d830ae4bf4..d54477b1001c 100644 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -73,10 +73,6 @@ amlogic,tx-delay-ns = <4>; - snps,reset-gpio = <&gpio GPIOH_4 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -85,6 +81,10 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; }; }; }; @@ -114,8 +114,9 @@ regulator-always-on; }; - DCDC2 { - regulator-name = "VDDAO"; + vddee: DCDC2 { + /* the output is also used as VDDAO */ + regulator-name = "VDD_EE"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1150000>; regulator-boot-on; @@ -189,6 +190,10 @@ }; }; +&mali { + mali-supply = <&vddee>; +}; + &saradc { status = "okay"; vref-supply = <&vddio_ao1v8>; diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/meson8m2.dtsi index bb87b251e16d..5bde7f502007 100644 --- a/arch/arm/boot/dts/meson8m2.dtsi +++ b/arch/arm/boot/dts/meson8m2.dtsi @@ -14,6 +14,16 @@ compatible = "amlogic,meson8m2-clkc", "amlogic,meson8-clkc"; }; +&dmcbus { + /* the offset of the canvas registers has changed compared to Meson8 */ + /delete-node/ video-lut@20; + + canvas: video-lut@48 { + compatible = "amlogic,meson8m2-canvas", "amlogic,canvas"; + reg = <0x48 0x14>; + }; +}; + ðmac { compatible = "amlogic,meson8m2-dwmac", "snps,dwmac"; reg = <0xc9410000 0x10000 diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index 5059ecac4478..bea05dc4ef0f 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -1371,7 +1371,6 @@ target-module@20000 { /* 0x48020000, ap 3 06.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart3"; reg = <0x20050 0x4>, <0x20054 0x4>, <0x20058 0x4>; @@ -1728,7 +1727,6 @@ target-module@6a000 { /* 0x4806a000, ap 26 18.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart1"; reg = <0x6a050 0x4>, <0x6a054 0x4>, <0x6a058 0x4>; @@ -1758,7 +1756,6 @@ target-module@6c000 { /* 0x4806c000, ap 28 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart2"; reg = <0x6c050 0x4>, <0x6c054 0x4>, <0x6c058 0x4>; @@ -1788,7 +1785,6 @@ target-module@6e000 { /* 0x4806e000, ap 30 1c.1 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart4"; reg = <0x6e050 0x4>, <0x6e054 0x4>, <0x6e058 0x4>; @@ -2107,7 +2103,6 @@ target-module@9c000 { /* 0x4809c000, ap 53 36.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc1"; reg = <0x9c000 0x4>, <0x9c010 0x4>; reg-names = "rev", "sysc"; @@ -2175,7 +2170,6 @@ target-module@ad000 { /* 0x480ad000, ap 63 50.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc3"; reg = <0xad000 0x4>, <0xad010 0x4>; reg-names = "rev", "sysc"; @@ -2241,7 +2235,6 @@ target-module@b4000 { /* 0x480b4000, ap 67 46.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc2"; reg = <0xb4000 0x4>, <0xb4010 0x4>; reg-names = "rev", "sysc"; @@ -2336,7 +2329,6 @@ target-module@d1000 { /* 0x480d1000, ap 73 44.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc4"; reg = <0xd1000 0x4>, <0xd1010 0x4>; reg-names = "rev", "sysc"; @@ -2369,7 +2361,6 @@ target-module@d5000 { /* 0x480d5000, ap 75 4e.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc5"; reg = <0xd5000 0x4>, <0xd5010 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi index 8ac24e3c8513..8a6721d436bd 100644 --- a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi +++ b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi @@ -319,9 +319,9 @@ gpio_keys_pins: gpio-keys-pins { pinctrl-single,pins = < - MFP_PIN_PXA300(14) MFP_AF0 /* SCK */ - MFP_PIN_PXA300(115) MFP_AF0 /* MOSI */ - MFP_PIN_PXA300(119) MFP_AF0 /* MISO */ + MFP_PIN_PXA300(14) MFP_AF0 /* on-off */ + MFP_PIN_PXA300(115) MFP_AF0 /* rescue boot */ + MFP_PIN_PXA300(119) MFP_AF0 /* setup */ >; pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); }; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-controller.dts b/arch/arm/boot/dts/pxa300-raumfeld-controller.dts index 65d825091f0d..12b15945ac6d 100644 --- a/arch/arm/boot/dts/pxa300-raumfeld-controller.dts +++ b/arch/arm/boot/dts/pxa300-raumfeld-controller.dts @@ -41,6 +41,8 @@ }; charger: charger { + pinctrl-names = "default"; + pinctrl-0 = <&charger_pins>; compatible = "gpio-charger"; charger-type = "mains"; gpios = <&gpio 101 GPIO_ACTIVE_LOW>; @@ -109,9 +111,10 @@ }; &keys { + pinctrl-0 = <&gpio_keys_pins &dock_detect_pins>; dock-detect { label = "dock detect"; - gpios = <&gpio 116 GPIO_ACTIVE_HIGH>; + gpios = <&gpio 116 GPIO_ACTIVE_LOW>; linux,code = <KEY_F5>; }; }; @@ -236,6 +239,22 @@ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); }; + charger_pins: charger_pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(31) MFP_AF0 /* PEN2 */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH); + pinctrl-single,bias-pullup = MPF_PULL_UP; + }; + + dock_detect_pins: dock_detect_pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(116) MFP_AF0 /* DOCK_DETECT */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH); + pinctrl-single,bias-pullup = MPF_PULL_UP; + }; + lcdc_pins: lcdc-pins { pinctrl-single,pins = < MFP_PIN_PXA300(54) MFP_AF1 /* LDD_0 */ diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts index 5f9e37585a28..a70560a8ea92 100644 --- a/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts +++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts @@ -116,6 +116,9 @@ st,invalid-input-detect-mute; /* 2 (half-bridge) and 1 (full-bridge) on-board power */ st,output-conf = /bits/ 8 <0x1>; + st,ch1-output-mapping = /bits/ 8 <0>; + st,ch2-output-mapping = /bits/ 8 <1>; + st,ch3-output-mapping = /bits/ 8 <2>; st,needs_esd_watchdog; }; }; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index e1e607f53ce6..c237a0e4b12a 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -71,6 +71,14 @@ #define MFP_DS13X < (0x7 << 10) MFP_DSMSK > /* + * MFP bias pull mode for pins. + * Example of use: pinctrl-single,bias-pullup = MPF_PULL_UP; + */ +#define MPF_PULL_MSK (0x7 << 13) +#define MPF_PULL_DOWN < (0x5 << 13) (0x5 << 13) 0 MPF_PULL_MSK > +#define MPF_PULL_UP < (0x6 << 13) (0x6 << 13) 0 MPF_PULL_MSK > + +/* * MFP low power mode for pins. * Example of use: * pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW|MFP_LPM_EDGE_FALL); diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 65975df6a8c3..8b79b4112ee1 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -1603,7 +1603,7 @@ }; replicator { - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; @@ -1636,7 +1636,7 @@ }; funnel@1a04000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x1a04000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts index 643c57f84818..bf402ae39226 100644 --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts @@ -50,6 +50,12 @@ }; }; + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + vcc-supply = <&pm8941_l18>; + }; + smd { rpm { rpm_requests { diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index b3b04736a159..3487daf98e81 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -280,6 +280,16 @@ }; }; + i2c2_pins: i2c2 { + mux { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + + drive-strength = <2>; + bias-disable; + }; + }; + i2c3_pins: i2c3 { mux { pins = "gpio10", "gpio11"; @@ -289,6 +299,16 @@ }; }; + i2c11_pins: i2c11 { + mux { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + + drive-strength = <2>; + bias-disable; + }; + }; + i2c12_pins: i2c12 { mux { pins = "gpio87", "gpio88"; @@ -306,6 +326,35 @@ input-enable; }; }; + + touch_pin: touch { + int { + pins = "gpio5"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + input-enable; + }; + + reset { + pins = "gpio8"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + panel_pin: panel { + te { + pins = "gpio12"; + function = "mdp_vsync"; + + drive-strength = <2>; + bias-disable; + }; + }; }; sdhci@f9824900 { @@ -369,6 +418,30 @@ }; }; + i2c@f9967000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c11_pins>; + clock-frequency = <355000>; + qcom,src-freq = <50000000>; + + led-controller@38 { + compatible = "ti,lm3630a"; + status = "ok"; + reg = <0x38>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-sources = <0 1>; + label = "lcd-backlight"; + default-brightness = <200>; + }; + }; + }; + i2c@f9968000 { status = "ok"; pinctrl-names = "default"; @@ -424,6 +497,41 @@ }; }; + i2c@f9924000 { + status = "ok"; + + clock-frequency = <355000>; + qcom,src-freq = <50000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + synaptics@70 { + compatible = "syna,rmi4-i2c"; + reg = <0x70>; + + interrupts-extended = <&msmgpio 5 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; + }; + i2c@f9925000 { status = "ok"; pinctrl-names = "default"; @@ -466,6 +574,54 @@ }; }; }; + + mdss@fd900000 { + status = "ok"; + + mdp@fd900000 { + status = "ok"; + }; + + dsi@fd922800 { + status = "ok"; + + vdda-supply = <&pm8941_l2>; + vdd-supply = <&pm8941_lvs3>; + vddio-supply = <&pm8941_l12>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + + panel: panel@0 { + reg = <0>; + compatible = "lg,acx467akm-7"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + dsi-phy@fd922a00 { + status = "ok"; + + vddio-supply = <&pm8941_l12>; + }; + }; }; &spmi_bus { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 45b5c8ef0374..369e58f64145 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> +#include <dt-bindings/clock/qcom,mmcc-msm8974.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/reset/qcom,gcc-msm8974.h> #include <dt-bindings/gpio/gpio.h> @@ -897,7 +898,7 @@ }; funnel@fc31b000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0xfc31b000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; @@ -931,7 +932,7 @@ }; funnel@fc31a000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0xfc31a000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; @@ -969,7 +970,7 @@ }; funnel@fc345000 { /* KPSS funnel only 4 inputs are used */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0xfc345000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; @@ -1085,6 +1086,137 @@ }; }; }; + + mdss: mdss@fd900000 { + status = "disabled"; + + compatible = "qcom,mdss"; + reg = <0xfd900000 0x100>, + <0xfd924000 0x1000>; + reg-names = "mdss_phys", + "vbif_phys"; + + power-domains = <&mmcc MDSS_GDSC>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp: mdp@fd900000 { + status = "disabled"; + + compatible = "qcom,mdp5"; + reg = <0xfd900100 0x22000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0 0>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi0: dsi@fd922800 { + status = "disabled"; + + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0xfd922800 0x1f8>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, + <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy0 0>, + <&dsi_phy0 1>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core", + "core_mmss"; + + phys = <&dsi_phy0>; + phy-names = "dsi-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi_phy0: dsi-phy@fd922a00 { + status = "disabled"; + + compatible = "qcom,dsi-phy-28nm-hpm"; + reg = <0xfd922a00 0xd4>, + <0xfd922b00 0x280>, + <0xfd922d80 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + qcom,dsi-phy-index = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>; + clock-names = "iface"; + }; + }; }; smd { diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index 474baa0c7cfc..07d611d2b7b5 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts index ff24301dc1be..99acfe4fe11a 100644 --- a/arch/arm/boot/dts/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "r7s72100.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/r7s72100-pinctrl.h> / { @@ -28,6 +29,37 @@ reg = <0x08000000 0x02000000>; }; + keyboard { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&keyboard_pins>; + + key-1 { + interrupt-parent = <&irqc>; + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_1>; + label = "SW1"; + wakeup-source; + }; + + key-2 { + interrupt-parent = <&irqc>; + interrupts = <2 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_2>; + label = "SW2"; + wakeup-source; + }; + + key-3 { + interrupt-parent = <&irqc>; + interrupts = <5 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_3>; + label = "SW3"; + wakeup-source; + }; + }; + lbsc { #address-cells = <1>; #size-cells = <1>; @@ -101,6 +133,12 @@ <RZA1_PINMUX(1, 7, 1)>; /* RIIC3SDA */ }; + keyboard_pins: keyboard { + pinmux = <RZA1_PINMUX(1, 9, 3)>, /* IRQ3 */ + <RZA1_PINMUX(1, 8, 3)>, /* IRQ2 */ + <RZA1_PINMUX(1, 11, 3)>; /* IRQ5 */ + }; + /* Serial Console */ scif2_pins: serial2 { pinmux = <RZA1_PINMUX(3, 0, 6)>, /* TxD2 */ diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 2211f88ede2a..d03dcd919d6f 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -670,6 +670,25 @@ status = "disabled"; }; + irqc: interrupt-controller@fcfef800 { + compatible = "renesas,r7s72100-irqc", + "renesas,rza1-irqc"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0xfcfef800 0x6>; + interrupt-map = + <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <7 0>; + }; + mtu2: timer@fcff0000 { compatible = "renesas,mtu2-r7s72100", "renesas,mtu2"; reg = <0xfcff0000 0x400>; diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts index 991e09de1219..d062d02865e7 100644 --- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts +++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "r7s9210.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/r7s9210-pinctrl.h> / { @@ -17,6 +18,8 @@ aliases { serial0 = &scif4; + ethernet0 = ðer0; + ethernet1 = ðer1; }; chosen { @@ -24,9 +27,19 @@ stdout-path = "serial0:115200n8"; }; - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x00800000>; /* HyperRAM */ + keyboard { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&keyboard_pins>; + + key-3 { + interrupt-parent = <&irqc>; + interrupts = <0 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_3>; + label = "SW3"; + wakeup-source; + }; }; lbsc { @@ -44,6 +57,41 @@ gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>; }; }; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x00800000>; /* HyperRAM */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +ðer0 { + pinctrl-names = "default"; + pinctrl-0 = <ð0_pins>; + status = "okay"; + renesas,no-ether-link; + phy-handle = <&phy0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +ðer1 { + pinctrl-names = "default"; + pinctrl-0 = <ð1_pins>; + status = "okay"; + renesas,no-ether-link; + phy-handle = <&phy1>; + phy1: ethernet-phy@1 { + reg = <0>; + }; }; /* EXTAL */ @@ -51,26 +99,80 @@ clock-frequency = <24000000>; /* 24MHz */ }; -/* RTC_X1 */ -&rtc_x1_clk { - clock-frequency = <32768>; +/* High resolution System tick timers */ +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; }; &pinctrl { + eth0_pins: eth0 { + pinmux = <RZA2_PINMUX(PORTE, 0, 7)>, /* REF50CK0 */ + <RZA2_PINMUX(PORT6, 1, 7)>, /* RMMI0_TXDEN */ + <RZA2_PINMUX(PORT6, 2, 7)>, /* RMII0_TXD0 */ + <RZA2_PINMUX(PORT6, 3, 7)>, /* RMII0_TXD1 */ + <RZA2_PINMUX(PORTE, 4, 7)>, /* RMII0_CRSDV */ + <RZA2_PINMUX(PORTE, 1, 7)>, /* RMII0_RXD0 */ + <RZA2_PINMUX(PORTE, 2, 7)>, /* RMII0_RXD1 */ + <RZA2_PINMUX(PORTE, 3, 7)>, /* RMII0_RXER */ + <RZA2_PINMUX(PORTE, 5, 1)>, /* ET0_MDC */ + <RZA2_PINMUX(PORTE, 6, 1)>, /* ET0_MDIO */ + <RZA2_PINMUX(PORTL, 0, 5)>; /* IRQ4 */ + }; + + eth1_pins: eth1 { + pinmux = <RZA2_PINMUX(PORTK, 3, 7)>, /* REF50CK1 */ + <RZA2_PINMUX(PORTK, 0, 7)>, /* RMMI1_TXDEN */ + <RZA2_PINMUX(PORTK, 1, 7)>, /* RMII1_TXD0 */ + <RZA2_PINMUX(PORTK, 2, 7)>, /* RMII1_TXD1 */ + <RZA2_PINMUX(PORT3, 2, 7)>, /* RMII1_CRSDV */ + <RZA2_PINMUX(PORTK, 4, 7)>, /* RMII1_RXD0 */ + <RZA2_PINMUX(PORT3, 5, 7)>, /* RMII1_RXD1 */ + <RZA2_PINMUX(PORT3, 1, 7)>, /* RMII1_RXER */ + <RZA2_PINMUX(PORT3, 3, 1)>, /* ET1_MDC */ + <RZA2_PINMUX(PORT3, 4, 1)>, /* ET1_MDIO */ + <RZA2_PINMUX(PORTL, 1, 5)>; /* IRQ5 */ + }; + + keyboard_pins: keyboard { + pinmux = <RZA2_PINMUX(PORTJ, 1, 6)>; /* IRQ0 */ + }; + /* Serial Console */ scif4_pins: serial4 { pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */ <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */ }; -}; -/* High resolution System tick timers */ -&ostm0 { - status = "okay"; + sdhi0_pins: sdhi0 { + pinmux = <RZA2_PINMUX(PORT5, 0, 3)>, /* SD0_CD */ + <RZA2_PINMUX(PORT5, 1, 3)>; /* SD0_WP */ + }; + + sdhi1_pins: sdhi1 { + pinmux = <RZA2_PINMUX(PORT5, 4, 3)>, /* SD1_CD */ + <RZA2_PINMUX(PORT5, 5, 3)>; /* SD1_WP */ + }; + + usb0_pins: usb0 { + pinmux = <RZA2_PINMUX(PORT5, 2, 3)>, /* VBUSIN0 */ + <RZA2_PINMUX(PORTC, 6, 1)>, /* VBUSEN0 */ + <RZA2_PINMUX(PORTC, 7, 1)>; /* OVRCUR0 */ + }; + + usb1_pins: usb1 { + pinmux = <RZA2_PINMUX(PORTC, 0, 1)>, /* VBUSIN1 */ + <RZA2_PINMUX(PORTC, 5, 1)>, /* VBUSEN1 */ + <RZA2_PINMUX(PORT7, 5, 5)>; /* OVRCUR1 */ + }; }; -&ostm1 { - status = "okay"; +/* RTC_X1 */ +&rtc_x1_clk { + clock-frequency = <32768>; }; /* Serial Console */ @@ -80,3 +182,38 @@ status = "okay"; }; + +&sdhi0 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhi0_pins>; + bus-width = <4>; + status = "okay"; +}; + +&sdhi1 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhi1_pins>; + bus-width = <4>; + status = "okay"; +}; + +/* USB-0 as Host */ +&usb2_phy0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + dr_mode = "host"; /* Requires JP3 to be fitted */ + status = "okay"; +}; + +/* USB-1 as Host */ +&usb2_phy1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; + dr_mode = "host"; + status = "okay"; +}; + +/* USB_X1 */ +&usb_x1_clk { + clock-frequency = <48000000>; +}; diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi index 22baa96f5974..72b79770e336 100644 --- a/arch/arm/boot/dts/r7s9210.dtsi +++ b/arch/arm/boot/dts/r7s9210.dtsi @@ -30,6 +30,13 @@ clock-frequency = <0>; }; + usb_x1_clk: usb_x1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* If clk present, value (48000000) must be set by board */ + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -146,6 +153,152 @@ status = "disabled"; }; + spi0: spi@e800c800 { + compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz"; + reg = <0xe800c800 0x24>; + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD 97>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@e800d000 { + compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz"; + reg = <0xe800d000 0x24>; + interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD 96>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@e800d800 { + compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz"; + reg = <0xe800d800 0x24>; + interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD 95>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ether0: ethernet@e8204000 { + compatible = "renesas,ether-r7s9210"; + reg = <0xe8204000 0x200>; + interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 65>; + power-domains = <&cpg>; + + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ether1: ethernet@e8204200 { + compatible = "renesas,ether-r7s9210"; + reg = <0xe8204200 0x200>; + interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 64>; + power-domains = <&cpg>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@e803a000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r7s9210", "renesas,riic-rz"; + reg = <0xe803a000 0x44>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 233 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 87>; + power-domains = <&cpg>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@e803a400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r7s9210", "renesas,riic-rz"; + reg = <0xe803a400 0x44>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 86>; + power-domains = <&cpg>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c2: i2c@e803a800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r7s9210", "renesas,riic-rz"; + reg = <0xe803a800 0x44>; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 85>; + power-domains = <&cpg>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c3: i2c@e803ac00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r7s9210", "renesas,riic-rz"; + reg = <0xe803ac00 0x44>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 257 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 258 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 84>; + power-domains = <&cpg>; + clock-frequency = <100000>; + status = "disabled"; + }; + ostm0: timer@e803b000 { compatible = "renesas,r7s9210-ostm", "renesas,ostm"; reg = <0xe803b000 0x30>; @@ -176,6 +329,120 @@ status = "disabled"; }; + ohci0: usb@e8218000 { + compatible = "generic-ohci"; + reg = <0xe8218000 0x100>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 61>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci0: usb@e8218100 { + compatible = "generic-ehci"; + reg = <0xe8218100 0x100>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 61>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@e8218200 { + compatible = "renesas,usb2-phy-r7s9210", "renesas,rcar-gen3-usb2-phy"; + reg = <0xe8218200 0x700>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 61>, <&usb_x1_clk>; + clock-names = "fck", "usb_x1"; + power-domains = <&cpg>; + #phy-cells = <0>; + status = "disabled"; + }; + + usbhs0: usb@e8219000 { + compatible = "renesas,usbhs-r7s9210", "renesas,rza2-usbhs"; + reg = <0xe8219000 0x724>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 61>; + renesas,buswait = <7>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci1: usb@e821a000 { + compatible = "generic-ohci"; + reg = <0xe821a000 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 60>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci1: usb@e821a100 { + compatible = "generic-ehci"; + reg = <0xe821a100 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 60>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@e821a200 { + compatible = "renesas,usb2-phy-r7s9210", "renesas,rcar-gen3-usb2-phy"; + reg = <0xe821a200 0x700>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 60>, <&usb_x1_clk>; + clock-names = "fck", "usb_x1"; + power-domains = <&cpg>; + #phy-cells = <0>; + status = "disabled"; + }; + + usbhs1: usb@e821b000 { + compatible = "renesas,usbhs-r7s9210", "renesas,rza2-usbhs"; + reg = <0xe821b000 0x724>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 60>; + renesas,buswait = <7>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + sdhi0: sd@e8228000 { + compatible = "renesas,sdhi-r7s9210"; + reg = <0xe8228000 0x8c0>; + interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 103>, <&cpg CPG_MOD 102>; + clock-names = "core", "cd"; + power-domains = <&cpg>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi1: sd@e822a000 { + compatible = "renesas,sdhi-r7s9210"; + reg = <0xe822a000 0x8c0>; + interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 101>, <&cpg CPG_MOD 100>; + clock-names = "core", "cd"; + power-domains = <&cpg>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + gic: interrupt-controller@e8221000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -206,6 +473,25 @@ reg = <0xfcfe8004 4>; }; + irqc: interrupt-controller@fcfef800 { + compatible = "renesas,r7s9210-irqc", + "renesas,rza1-irqc"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0xfcfef800 0x6>; + interrupt-map = + <0 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <7 0>; + }; + pinctrl: pin-controller@fcffe000 { compatible = "renesas,r7s9210-pinctrl"; reg = <0xfcffe000 0x1000>; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index f70f4a3e5c43..a5351ddbf506 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -19,7 +19,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 32757caa2584..758360a2edc3 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -21,7 +21,7 @@ }; chosen { - bootargs = "earlyprintk ignore_loglevel root=/dev/nfs ip=dhcp rw"; + bootargs = "earlyprintk ignore_loglevel root=/dev/nfs ip=on rw"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts index ca0e0fc9b246..807e7d0d6b62 100644 --- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts +++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts @@ -17,7 +17,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index 1db220cfc1a1..ce6603b0994b 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -42,7 +42,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial3:115200n8"; }; diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts index 655b10bb42d5..db72a801abe5 100644 --- a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts +++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts @@ -17,7 +17,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts index 2840eb0d6fd4..450efe923008 100644 --- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts +++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts @@ -18,7 +18,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial1:115200n8"; }; @@ -63,7 +63,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; gpios-states = <1>; states = <3300000 1 1800000 0>; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index 0b49956069fc..6c7b07c4b9d3 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -25,7 +25,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index d4bee1ec9044..c755f0b8fd0d 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -21,7 +21,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 7b9508e83d46..83cc619861b2 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -56,7 +56,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -423,6 +423,8 @@ */ i2cpwr: i2c-13 { compatible = "i2c-demux-pinctrl"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; i2c-parent = <&iic3>, <&i2c3>; i2c-bus-name = "i2c-pwr"; #address-cells = <1>; @@ -615,6 +617,11 @@ function = "iic3"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + hsusb_pins: hsusb { groups = "usb0_ovc_vbus"; function = "usb0"; diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts index 7a7d3b84d1a6..a315ba749aa4 100644 --- a/arch/arm/boot/dts/r8a7790-stout.dts +++ b/arch/arm/boot/dts/r8a7790-stout.dts @@ -19,7 +19,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -179,6 +179,11 @@ function = "iic3"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + usb0_pins: usb0 { groups = "usb0"; function = "usb0"; @@ -317,7 +322,7 @@ &iic3 { pinctrl-names = "default"; - pinctrl-0 = <&iic3_pins>; + pinctrl-0 = <&iic3_pins &pmic_irq_pins>; status = "okay"; pmic@58 { diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index e6580aa0cea3..af6bd8fcd5a4 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -56,7 +56,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -540,6 +540,11 @@ function = "intc"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; @@ -776,6 +781,8 @@ }; &i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; status = "okay"; clock-frequency = <100000>; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index fefdf8238bbe..d6cf16aac14d 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -31,7 +31,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -228,6 +228,11 @@ function = "intc"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; @@ -373,6 +378,8 @@ }; &i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; status = "okay"; clock-frequency = <100000>; diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts index b6fa80c3b07e..248eb717eb35 100644 --- a/arch/arm/boot/dts/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -21,7 +21,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -234,6 +234,11 @@ groups = "du1_rgb666", "du1_sync", "du1_disp"; function = "du1"; }; + + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; }; &rwdt { @@ -314,6 +319,8 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; interrupt-parent = <&irqc>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts index f46f4567b3d4..bd2a63bdab3d 100644 --- a/arch/arm/boot/dts/r8a7792-wheat.dts +++ b/arch/arm/boot/dts/r8a7792-wheat.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 38fb43d11b27..c4ea2d676030 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -875,6 +875,40 @@ compatible = "renesas,prr"; reg = <0 0xff000044 0 4>; }; + + cmt0: timer@ffca0000 { + compatible = "renesas,r8a7792-cmt0", + "renesas,rcar-gen2-cmt0"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 124>; + + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a7792-cmt1", + "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 329>; + clock-names = "fck"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 329>; + + status = "disabled"; + }; }; timer { diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index f51601af89a2..42f3313e6988 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -52,7 +52,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -514,6 +514,11 @@ function = "intc"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; @@ -711,6 +716,8 @@ }; &i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; status = "okay"; clock-frequency = <100000>; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 0ab3d8d57f6d..1d22fcdc5d22 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -22,7 +22,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 60e91ebfa65d..b3177aea45d1 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -34,7 +34,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index da102fff96a2..340ed6ccb08f 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -143,6 +143,11 @@ #clock-cells = <0>; }; + display_subsystem: display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + }; + i2s1: i2s1@100b0000 { compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; reg = <0x100b0000 0x4000>; @@ -529,6 +534,17 @@ status = "disabled"; }; + hdmi_phy: hdmi-phy@12030000 { + compatible = "rockchip,rk3228-hdmi-phy"; + reg = <0x12030000 0x10000>; + clocks = <&cru PCLK_HDMI_PHY>, <&xin24m>, <&cru DCLK_HDMI_PHY>; + clock-names = "sysclk", "refoclk", "refpclk"; + #clock-cells = <0>; + clock-output-names = "hdmiphy_phy"; + #phy-cells = <0>; + status = "disabled"; + }; + gpu: gpu@20000000 { compatible = "rockchip,rk3228-mali", "arm,mali-400"; reg = <0x20000000 0x10000>; @@ -572,6 +588,28 @@ status = "disabled"; }; + vop: vop@20050000 { + compatible = "rockchip,rk3228-vop"; + reg = <0x20050000 0x1ffc>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP>, <&cru DCLK_VOP>, <&cru HCLK_VOP>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vop_mmu>; + status = "disabled"; + + vop_out: port { + #address-cells = <1>; + #size-cells = <0>; + + vop_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_vop>; + }; + }; + }; + vop_mmu: iommu@20053f00 { compatible = "rockchip,iommu"; reg = <0x20053f00 0x100>; @@ -579,7 +617,7 @@ interrupt-names = "vop_mmu"; clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; clock-names = "aclk", "iface"; - iommu-cells = <0>; + #iommu-cells = <0>; status = "disabled"; }; @@ -594,6 +632,36 @@ status = "disabled"; }; + hdmi: hdmi@200a0000 { + compatible = "rockchip,rk3228-dw-hdmi"; + reg = <0x200a0000 0x20000>; + reg-io-width = <4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&cru SCLK_HDMI_PHY>; + assigned-clock-parents = <&hdmi_phy>; + clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>; + clock-names = "isfr", "iahb", "cec"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>; + resets = <&cru SRST_HDMI_P>; + reset-names = "hdmi"; + phys = <&hdmi_phy>; + phy-names = "hdmi"; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in_vop: endpoint@0 { + reg = <0>; + remote-endpoint = <&vop_out_hdmi>; + }; + }; + }; + }; + sdmmc: dwmmc@30000000 { compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x30000000 0x4000>; @@ -922,6 +990,21 @@ }; }; + hdmi { + hdmi_hpd: hdmi-hpd { + rockchip,pins = <0 RK_PB7 1 &pcfg_pull_down>; + }; + + hdmii2c_xfer: hdmii2c-xfer { + rockchip,pins = <0 RK_PA6 2 &pcfg_pull_none>, + <0 RK_PA7 2 &pcfg_pull_none>; + }; + + hdmi_cec: hdmi-cec { + rockchip,pins = <0 RK_PC4 1 &pcfg_pull_none>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>, diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index fbef34578100..1cadb522fd0d 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -70,6 +70,21 @@ pinctrl-0 = <&ac_present_ap>; }; + lid_switch: lid-switch { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&ap_lid_int_l>; + + lid { + label = "Lid"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + debounce-interval = <1>; + }; + }; + panel: panel { compatible ="innolux,n116bge", "simple-panel"; status = "okay"; @@ -149,18 +164,6 @@ status = "okay"; }; -&gpio_keys { - pinctrl-0 = <&pwr_key_l &ap_lid_int_l>; - lid { - label = "Lid"; - gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; - wakeup-source; - linux,code = <0>; /* SW_LID */ - linux,input-type = <5>; /* EV_SW */ - debounce-interval = <1>; - }; -}; - &pwm0 { status = "okay"; }; @@ -234,6 +237,7 @@ /* Wake only */ &suspend_l_wake + &bt_dev_wake_awake >; pinctrl-1 = < /* Common for sleep and wake, but no owners */ @@ -243,6 +247,7 @@ /* Sleep only */ &suspend_l_sleep + &bt_dev_wake_sleep >; backlight { diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index e248f55ee8d2..fcd119168cb6 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -135,6 +135,213 @@ pinctrl-0 = <&vcc50_hdmi_en>; }; +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "DDRIO_PWROFF", + "DDRIO_RETEN", + "TS3A227E_INT_L", + "PMIC_INT_L", + "PWR_KEY_L", + "AP_LID_INT_L", + "EC_IN_RW", + + "AC_PRESENT_AP", + /* + * RECOVERY_SW_L is Chrome OS ABI. Schematics call + * it REC_MODE_L. + */ + "RECOVERY_SW_L", + "OTP_OUT", + "HOST1_PWR_EN", + "USBOTG_PWREN_H", + "AP_WARM_RESET_H", + "nFALUT2", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "SUSPEND_L", + "USB_INT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "", + "EMMC_RST_L", + "", + "", + "BL_PWR_EN", + "AVDD_1V8_DISP_EN"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS", + "UART0_RTS", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "BT_DEV_WAKE", /* Maybe missing from mighty? */ + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "SPI0_CLK", + "SPI0_CS0", + "SPI0_TXD", + "SPI0_RXD", + + "", + "", + "", + "VCC50_HDMI_EN"; +}; + +&gpio6 { + gpio-line-names = "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI", + "I2S0_SDO0", + "HP_DET_H", + "ALS_INT", + "INT_CODEC", + + "I2S0_CLK", + "I2C2_SDA", + "I2C2_SCL", + "MICDET", + "", + "", + "", + "", + + "SDMMC_D0", + "SDMMC_D1", + "SDMMC_D2", + "SDMMC_D3", + "SDMMC_CLK", + "SDMMC_CMD"; +}; + +&gpio7 { + gpio-line-names = "LCDC_BL", + "PWM_LOG", + "BL_EN", + "TRACKPAD_INT", + "TPM_INT_H", + "SDMMC_DET_L", + /* + * AP_FLASH_WP_L is Chrome OS ABI. Schematics call + * it FW_WP_AP. + */ + "AP_FLASH_WP_L", + "EC_INT", + + "CPU_NMI", + "DVSOK", + "SDMMC_WP", /* mighty only */ + "EDP_HPD", + "DVS1", + "nFALUT1", /* nFAULT1 on jaq */ + "LCD_EN", + "DVS2", + + "VCC5V_GOOD_H", + "I2C4_SDA_TP", + "I2C4_SCL_TP", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "5V_DRV", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + &pinctrl { backlight { bl_pwr_en: bl_pwr_en { diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index b1613af83d5d..164561f04c1d 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -103,6 +103,213 @@ pinctrl-0 = <&vcc50_hdmi_en>; }; +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "DDRIO_PWROFF", + "DDRIO_RETEN", + "TS3A227E_INT_L", + "PMIC_INT_L", + "PWR_KEY_L", + "AP_LID_INT_L", + "EC_IN_RW", + + "AC_PRESENT_AP", + /* + * RECOVERY_SW_L is Chrome OS ABI. Schematics call + * it REC_MODE_L. + */ + "RECOVERY_SW_L", + "OTP_OUT", + "HOST1_PWR_EN", + "USBOTG_PWREN_H", + "AP_WARM_RESET_H", + "nFAULT2", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "SUSPEND_L", + "USB_INT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "", + "EMMC_RST_L", + "", + "", + "BL_PWR_EN", + "AVDD_1V8_DISP_EN"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS", + "UART0_RTS", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "BT_DEV_WAKE", + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "SPI0_CLK", + "SPI0_CS0", + "SPI0_TXD", + "SPI0_RXD", + + "", + "", + "", + "VCC50_HDMI_EN"; +}; + +&gpio6 { + gpio-line-names = "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI", + "I2S0_SDO0", + "HP_DET_H", + "", + "INT_CODEC", + + "I2S0_CLK", + "I2C2_SDA", + "I2C2_SCL", + "MICDET", + "", + "", + "", + "", + + "SDMMC_D0", + "SDMMC_D1", + "SDMMC_D2", + "SDMMC_D3", + "SDMMC_CLK", + "SDMMC_CMD"; +}; + +&gpio7 { + gpio-line-names = "LCDC_BL", + "PWM_LOG", + "BL_EN", + "TRACKPAD_INT", + "TPM_INT_H", + "SDMMC_DET_L", + /* + * AP_FLASH_WP_L is Chrome OS ABI. Schematics call + * it FW_WP_AP. + */ + "AP_FLASH_WP_L", + "EC_INT", + + "CPU_NMI", + "DVSOK", + "", + "EDP_HPD", + "DVS1", + "nFAULT1", + "LCD_EN", + "DVS2", + + "VCC5V_GOOD_H", + "I2C4_SDA_TP", + "I2C4_SCL_TP", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "5V_DRV", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + &pinctrl { backlight { bl_pwr_en: bl_pwr_en { diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts index e852594417b5..aa352d40c991 100644 --- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts @@ -75,9 +75,7 @@ cooling-maps { /* * After 1st level, throttle the CPU down to as low as 1.4 GHz - * and don't let the GPU go faster than 400 MHz. Note that we - * won't throttle the GPU lower than 400 MHz due to CPU - * heat--we'll let the GPU do the rest itself. + * and don't let the GPU go faster than 400 MHz. */ cpu_warm_limit_cpu { trip = <&cpu_alert_warm>; @@ -86,6 +84,10 @@ <&cpu2 THERMAL_NO_LIMIT 4>, <&cpu3 THERMAL_NO_LIMIT 4>; }; + cpu_warm_limit_gpu { + trip = <&cpu_alert_warm>; + cooling-device = <&gpu 1 1>; + }; /* * Add some discrete steps to help throttling system deal @@ -125,11 +127,80 @@ <&cpu2 8 THERMAL_NO_LIMIT>, <&cpu3 8 THERMAL_NO_LIMIT>; }; + + /* At very hot, don't let GPU go over 300 MHz */ + cpu_very_hot_limit_gpu { + trip = <&cpu_alert_very_hot>; + cooling-device = <&gpu 2 2>; + }; }; }; -&emmc { - /delete-property/mmc-hs200-1_8v; +&gpu_thermal { + /delete-node/ trips; + /delete-node/ cooling-maps; + + trips { + gpu_alert_warmish: gpu_alert_warmish { + temperature = <60000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu_alert_warm: gpu_alert_warm { + temperature = <65000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu_alert_hotter: gpu_alert_hotter { + temperature = <84000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu_alert_very_very_hot: gpu_alert_very_very_hot { + temperature = <86000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu_crit: gpu_crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + /* After 1st level throttle the GPU down to as low as 400 MHz */ + gpu_warmish_limit_gpu { + trip = <&gpu_alert_warmish>; + cooling-device = <&gpu THERMAL_NO_LIMIT 1>; + }; + + /* + * Slightly after we throttle the GPU, we'll also make sure that + * the CPU can't go faster than 1.4 GHz. Note that we won't + * throttle the CPU lower than 1.4 GHz due to GPU heat--we'll + * let the CPU do the rest itself. + */ + gpu_warm_limit_cpu { + trip = <&gpu_alert_warm>; + cooling-device = <&cpu0 4 4>, + <&cpu1 4 4>, + <&cpu2 4 4>, + <&cpu3 4 4>; + }; + + /* When hot, GPU goes down to 300 MHz */ + gpu_hotter_limit_gpu { + trip = <&gpu_alert_hotter>; + cooling-device = <&gpu 2 2>; + }; + + /* When really hot, don't let GPU go _above_ 300 MHz */ + gpu_very_very_hot_limit_gpu { + trip = <&gpu_alert_very_very_hot>; + cooling-device = <&gpu 2 THERMAL_NO_LIMIT>; + }; + }; }; &i2c2 { @@ -142,8 +213,6 @@ &i2s { status = "okay"; - clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>; }; &rk808 { @@ -183,6 +252,157 @@ }; }; +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "", + "", + "", + "PMIC_INT_L", + "POWER_BUTTON_L", + "", + "", + + "", + /* + * RECOVERY_SW_L is Chrome OS ABI. Schematics call + * it REC_MODE_L. + */ + "RECOVERY_SW_L", + "OT_RESET", + "", + "", + "AP_WARM_RESET_H", + "", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "", + "nFALUT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "", + "EMMC_RST_L"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS_L", + "UART0_RTS_L", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "BT_DEV_WAKE", + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio7 { + gpio-line-names = "", + "PWM_LOG", + "", + "", + "TPM_INT_H", + "SDMMC_DET_L", + /* + * AP_FLASH_WP_L is Chrome OS ABI. Schematics call + * it FW_WP_AP. + */ + "AP_FLASH_WP_L", + "", + + "CPU_NMI", + "DVSOK", + "HDMI_WAKE", + "POWER_HDMI_ON", + "DVS1", + "", + "", + "DVS2", + + "HDMI_CEC", + "", + "", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + &pinctrl { hdmi { power_hdmi_on: power-hdmi-on { diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 468a1818545d..9008e703c07e 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -48,6 +48,26 @@ regulator-boot-on; vin-supply = <&vcc18_wl>; }; + + volume_buttons: volume-buttons { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&volum_down_l &volum_up_l>; + + volum_down { + label = "Volum_down"; + gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <100>; + }; + + volum_up { + label = "Volum_up"; + gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <100>; + }; + }; }; &backlight { @@ -86,30 +106,6 @@ 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; power-supply = <&backlight_regulator>; - post-pwm-on-delay-ms = <200>; - pwm-off-delay-ms = <200>; -}; - -&emmc { - /delete-property/mmc-hs200-1_8v; -}; - -&gpio_keys { - pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>; - - volum_down { - label = "Volum_down"; - gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEDOWN>; - debounce-interval = <100>; - }; - - volum_up { - label = "Volum_up"; - gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - debounce-interval = <100>; - }; }; &i2c_tunnel { @@ -188,6 +184,218 @@ pinctrl-0 = <&vcc50_hdmi_en>; }; +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "DDRIO_PWROFF", + "DDRIO_RETEN", + "TS3A227E_INT_L", + "PMIC_INT_L", + "PWR_KEY_L", + "AP_LID_INT_L", + "EC_IN_RW", + + "AC_PRESENT_AP", + /* + * RECOVERY_SW_L is Chrome OS ABI. Schematics call + * it REC_MODE_L. + */ + "RECOVERY_SW_L", + "OTP_OUT", + "HOST1_PWR_EN", + "USBOTG_PWREN_H", + "AP_WARM_RESET_H", + "nFALUT2", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "SUSPEND_L", + "USB_INT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "PROCHOT#", + "EMMC_RST_L", + "", + "", + "BL_PWR_EN", + "AVDD_1V8_DISP_EN", + "TOUCH_INT", + "TOUCH_RST", + + "I2C3_SCL_TP", + "I2C3_SDA_TP"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS", + "UART0_RTS", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "dev_wake", + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "Volum_Up#", + "Volum_Down#", + "SPI0_CLK", + "SPI0_CS0", + "SPI0_TXD", + "SPI0_RXD", + + "", + "", + "", + "VCC50_HDMI_EN"; +}; + +&gpio6 { + gpio-line-names = "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI", + "I2S0_SDO0", + "HP_DET_H", + "", + "INT_CODEC", + + "I2S0_CLK", + "I2C2_SDA", + "I2C2_SCL", + "MICDET", + "", + "", + "", + "", + + "SDMMC_D0", + "SDMMC_D1", + "SDMMC_D2", + "SDMMC_D3", + "SDMMC_CLK", + "SDMMC_CMD"; +}; + +&gpio7 { + gpio-line-names = "LCDC_BL", + "PWM_LOG", + "BL_EN", + "TRACKPAD_INT", + "TPM_INT_H", + "SDMMC_DET_L", + /* + * AP_FLASH_WP_L is Chrome OS ABI. Schematics call + * it FW_WP_AP. + */ + "AP_FLASH_WP_L", + "EC_INT", + + "CPU_NMI", + "DVS_OK", + "SDMMC_WP", + "EDP_HPD", + "DVS1", + "nFALUT1", + "LCD_EN", + "DVS2", + + "VCC5V_GOOD_H", + "I2C4_SDA_TP", + "I2C4_SCL_TP", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "5V_DRV", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + &pinctrl { backlight { bl_pwr_en: bl_pwr_en { diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index 9645be7b3d8c..9b6f4d9b03b6 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -35,7 +35,7 @@ force-hpd; }; -&gpio_keys { +&lid_switch { pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; power { diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index 2ac8748a3a0c..9b140db04456 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -64,6 +64,10 @@ temperature = <70000>; }; +&cpu_crit { + temperature = <90000>; +}; + &edp { /delete-property/pinctrl-names; /delete-property/pinctrl-0; @@ -71,6 +75,14 @@ force-hpd; }; +&gpu_alert0 { + temperature = <80000>; +}; + +&gpu_crit { + temperature = <90000>; +}; + &panel { power-supply= <&panel_regulator>; }; @@ -101,6 +113,213 @@ pinctrl-0 = <&vcc50_hdmi_en>; }; +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "DDRIO_PWROFF", + "DDRIO_RETEN", + "TS3A227E_INT_L", + "PMIC_INT_L", + "PWR_KEY_L", + "AP_LID_INT_L", + "EC_IN_RW", + + "AC_PRESENT_AP", + /* + * RECOVERY_SW_L is Chrome OS ABI. Schematics call + * it REC_MODE_L. + */ + "RECOVERY_SW_L", + "OTP_OUT", + "HOST1_PWR_EN", + "USBOTG_PWREN_H", + "AP_WARM_RESET_H", + "nFALUT2", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "SUSPEND_L", + "USB_INT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "PWRLIMIT#_CPU", + "EMMC_RST_L", + "", + "", + "BL_PWR_EN", + "AVDD_1V8_DISP_EN"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS", + "UART0_RTS", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "BT_DEV_WAKE", + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "SPI0_CLK", + "SPI0_CS0", + "SPI0_TXD", + "SPI0_RXD", + + "", + "", + "", + "VCC50_HDMI_EN"; +}; + +&gpio6 { + gpio-line-names = "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI", + "I2S0_SDO0", + "HP_DET_H", + "ALS_INT", /* not connected */ + "INT_CODEC", + + "I2S0_CLK", + "I2C2_SDA", + "I2C2_SCL", + "MICDET", + "", + "", + "", + "", + + "SDMMC_D0", + "SDMMC_D1", + "SDMMC_D2", + "SDMMC_D3", + "SDMMC_CLK", + "SDMMC_CMD"; +}; + +&gpio7 { + gpio-line-names = "LCDC_BL", + "PWM_LOG", + "BL_EN", + "TRACKPAD_INT", + "TPM_INT_H", + "SDMMC_DET_L", + /* + * AP_FLASH_WP_L is Chrome OS ABI. Schematics call + * it FW_WP_AP. + */ + "AP_FLASH_WP_L", + "EC_INT", + + "CPU_NMI", + "DVS_OK", + "", + "EDP_HOTPLUG", + "DVS1", + "nFALUT1", + "LCD_EN", + "DVS2", + + "VCC5V_GOOD_H", + "I2C4_SDA_TP", + "I2C4_SCL_TP", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "5V_DRV", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + &pinctrl { backlight { bl_pwr_en: bl_pwr_en { diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 1d8bfed7830c..8fc8eac699bf 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -23,11 +23,36 @@ reg = <0x0 0x0 0x0 0x80000000>; }; - gpio_keys: gpio-keys { + bt_activity: bt-activity { compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake>; + + /* + * HACK: until we have an LPM driver, we'll use an + * ugly GPIO key to allow Bluetooth to wake from S3. + * This is expected to only be used by BT modules that + * use UART for comms. For BT modules that talk over + * SDIO we should use a wakeup mechanism related to SDIO. + * + * Use KEY_RESERVED here since that will work as a wakeup but + * doesn't get reported to higher levels (so doesn't confuse + * Chrome). + */ + bt-wake { + label = "BT Wakeup"; + gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_RESERVED>; + wakeup-source; + }; + + }; + power_button: power-button { + compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pwr_key_l>; + power { label = "Power"; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; @@ -123,6 +148,10 @@ cpu0-supply = <&vdd_cpu>; }; +&cpu_crit { + temperature = <100000>; +}; + /* rk3288-c used in Veyron Chrome-devices has slightly changed OPPs */ &cpu_opp_table { /delete-node/ opp-312000000; @@ -162,8 +191,18 @@ status = "okay"; }; +&gpu_alert0 { + temperature = <72500>; +}; + +&gpu_crit { + temperature = <100000>; +}; + &hdmi { - ddc-i2c-bus = <&i2c5>; + pinctrl-names = "default", "unwedge"; + pinctrl-0 = <&hdmi_ddc>; + pinctrl-1 = <&hdmi_ddc_unwedge>; status = "okay"; }; @@ -334,14 +373,6 @@ i2c-scl-rising-time-ns = <300>; /* 225ns measured */ }; -&i2c5 { - status = "okay"; - - clock-frequency = <100000>; - i2c-scl-falling-time-ns = <300>; - i2c-scl-rising-time-ns = <1000>; -}; - &io_domains { status = "okay"; @@ -394,6 +425,7 @@ rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-temp = <125000>; }; &uart0 { @@ -455,12 +487,18 @@ &ddr0_retention &ddrio_pwroff &global_pwroff + + /* Wake only */ + &bt_dev_wake_awake >; pinctrl-1 = < /* Common for sleep and wake, but no owners */ &ddr0_retention &ddrio_pwroff &global_pwroff + + /* Sleep only */ + &bt_dev_wake_sleep >; pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { @@ -544,6 +582,10 @@ rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; + bt_host_wake: bt-host-wake { + rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_down>; + }; + /* * We run sdio0 at max speed; bump up drive strength. * We also have external pulls, so disable the internal ones. @@ -562,6 +604,20 @@ sdio0_clk: sdio0-clk { rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none_drv_8ma>; }; + + /* + * These pins are only present on very new veyron boards; on + * older boards bt_dev_wake is simply always high. Note that + * gpio4_D2 is a NC on old veyron boards, so it doesn't hurt + * to map this pin everywhere + */ + bt_dev_wake_sleep: bt-dev-wake-sleep { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_low>; + }; + + bt_dev_wake_awake: bt-dev-wake-awake { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>; + }; }; tpm { diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index aa017abf4f42..cc893e154fe5 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -231,6 +231,7 @@ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; clock-frequency = <24000000>; + arm,no-tick-in-suspend; }; timer: timer@ff810000 { @@ -551,10 +552,7 @@ map0 { trip = <&gpu_alert0>; cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -682,7 +680,7 @@ #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; - clocks = <&cru PCLK_PWM>; + clocks = <&cru PCLK_RKPWM>; clock-names = "pwm"; status = "disabled"; }; @@ -693,7 +691,7 @@ #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm1_pin>; - clocks = <&cru PCLK_PWM>; + clocks = <&cru PCLK_RKPWM>; clock-names = "pwm"; status = "disabled"; }; @@ -704,7 +702,7 @@ #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm2_pin>; - clocks = <&cru PCLK_PWM>; + clocks = <&cru PCLK_RKPWM>; clock-names = "pwm"; status = "disabled"; }; @@ -712,10 +710,10 @@ pwm3: pwm@ff680030 { compatible = "rockchip,rk3288-pwm"; reg = <0x0 0xff680030 0x0 0x10>; - #pwm-cells = <2>; + #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm3_pin>; - clocks = <&cru PCLK_PWM>; + clocks = <&cru PCLK_RKPWM>; clock-names = "pwm"; status = "disabled"; }; @@ -1285,6 +1283,7 @@ interrupt-names = "job", "mmu", "gpu"; clocks = <&cru ACLK_GPU>; operating-points-v2 = <&gpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ power-domains = <&power RK3288_PD_GPU>; status = "disabled"; }; @@ -1308,10 +1307,6 @@ opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1100000>; }; - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <1200000>; - }; opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1250000>; @@ -1552,6 +1547,15 @@ rockchip,pins = <7 RK_PC3 2 &pcfg_pull_none>, <7 RK_PC4 2 &pcfg_pull_none>; }; + + hdmi_ddc_unwedge: hdmi-ddc-unwedge { + rockchip,pins = <7 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>, + <7 RK_PC4 2 &pcfg_pull_none>; + }; + }; + + pcfg_output_low: pcfg-output-low { + output-low; }; pcfg_pull_up: pcfg-pull-up { diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 3bbc84bf8dbf..f770aace0efd 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1371,30 +1371,11 @@ status = "disabled"; }; - sckc@fffffe50 { - compatible = "atmel,at91sam9x5-sckc"; + clk32k: sckc@fffffe50 { + compatible = "atmel,sama5d3-sckc"; reg = <0xfffffe50 0x4>; - - slow_rc_osc: slow_rc_osc { - compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - atmel,startup-time-usec = <75>; - }; - - slow_osc: slow_osc { - compatible = "atmel,at91sam9x5-clk-slow-osc"; - #clock-cells = <0>; - clocks = <&slow_xtal>; - atmel,startup-time-usec = <1200000>; - }; - - clk32k: slowck { - compatible = "atmel,at91sam9x5-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc &slow_osc>; - }; + clocks = <&slow_xtal>; + #clock-cells = <0>; }; rtc@fffffeb0 { diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index daac0c6078c5..1916f31a30ff 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -36,7 +36,7 @@ }; chosen { - bootargs = "root=/dev/nfs ip=dhcp ignore_loglevel rw"; + bootargs = "root=/dev/nfs ip=on ignore_loglevel rw"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index ae24599d5829..a0a6d8507265 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -418,7 +418,7 @@ }; gmac0: ethernet@ff800000 { - compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; + compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac"; altr,sysmgr-syscon = <&sysmgr 0x44 0>; reg = <0xff800000 0x2000>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; @@ -431,15 +431,15 @@ rx-fifo-depth = <16384>; clocks = <&l4_mp_clk>; clock-names = "stmmaceth"; - resets = <&rst EMAC0_RESET>; - reset-names = "stmmaceth"; + resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; gmac1: ethernet@ff802000 { - compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; - altr,sysmgr-syscon = <&sysmgr 0x48 0>; + compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac"; + altr,sysmgr-syscon = <&sysmgr 0x48 8>; reg = <0xff802000 0x2000>; interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; @@ -451,15 +451,15 @@ rx-fifo-depth = <16384>; clocks = <&l4_mp_clk>; clock-names = "stmmaceth"; - resets = <&rst EMAC1_RESET>; - reset-names = "stmmaceth"; + resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; gmac2: ethernet@ff804000 { - compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; - altr,sysmgr-syscon = <&sysmgr 0x4C 0>; + compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac"; + altr,sysmgr-syscon = <&sysmgr 0x4C 16>; reg = <0xff804000 0x2000>; interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; @@ -470,8 +470,9 @@ tx-fifo-depth = <4096>; rx-fifo-depth = <16384>; clocks = <&l4_mp_clk>; - resets = <&rst EMAC2_RESET>; clock-names = "stmmaceth"; + resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index 360dae5a5b12..0efbeccc5cd2 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -48,6 +48,13 @@ }; }; + ref_033v: 033-v-ref { + compatible = "regulator-fixed"; + regulator-name = "0.33V"; + regulator-min-microvolt = <330000>; + regulator-max-microvolt = <330000>; + }; + soc { clkmgr@ffd04000 { clocks { @@ -128,6 +135,18 @@ i2c-sda-falling-time-ns = <6000>; i2c-scl-falling-time-ns = <6000>; + adc@14 { + compatible = "lltc,ltc2497"; + reg = <0x14>; + vref-supply = <&ref_033v>; + }; + + adc@16 { + compatible = "lltc,ltc2497"; + reg = <0x16>; + vref-supply = <&ref_033v>; + }; + eeprom@51 { compatible = "atmel,24c32"; reg = <0x51>; diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts index d90b0d1e18c7..2b1664884ae7 100644 --- a/arch/arm/boot/dts/stm32746g-eval.dts +++ b/arch/arm/boot/dts/stm32746g-eval.dts @@ -44,6 +44,7 @@ #include "stm32f746.dtsi" #include "stm32f746-pinctrl.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "STMicroelectronics STM32746g-EVAL board"; @@ -69,9 +70,15 @@ gpios = <&gpiof 10 1>; linux,default-trigger = "heartbeat"; }; + orange { + gpios = <&stmfx_pinctrl 17 1>; + }; red { gpios = <&gpiob 7 1>; }; + blue { + gpios = <&stmfx_pinctrl 19 1>; + }; }; gpio_keys { @@ -86,6 +93,43 @@ }; }; + joystick { + compatible = "gpio-keys"; + #size-cells = <0>; + pinctrl-0 = <&joystick_pins>; + pinctrl-names = "default"; + button-0 { + label = "JoySel"; + linux,code = <KEY_ENTER>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + }; + button-1 { + label = "JoyDown"; + linux,code = <KEY_DOWN>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + button-2 { + label = "JoyLeft"; + linux,code = <KEY_LEFT>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + }; + button-3 { + label = "JoyRight"; + linux,code = <KEY_RIGHT>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + }; + button-4 { + label = "JoyUp"; + linux,code = <KEY_UP>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + }; + }; + usbotg_hs_phy: usb-phy { #phy-cells = <0>; compatible = "usb-nop-xceiv"; @@ -115,6 +159,28 @@ i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; + + stmfx: stmfx@42 { + compatible = "st,stmfx-0300"; + reg = <0x42>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpioi>; + + stmfx_pinctrl: stmfx-pin-controller { + compatible = "st,stmfx-0300-pinctrl"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&stmfx_pinctrl 0 0 24>; + + joystick_pins: joystick { + pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; + drive-push-pull; + bias-pull-up; + }; + }; + }; }; &rtc { diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index 85c417d9983b..df6470133574 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -26,6 +26,7 @@ st,bank-name = "GPIOA"; ngpios = <16>; gpio-ranges = <&pinctrl 0 0 16>; + status = "disabled"; }; gpiob: gpio@50003000 { @@ -38,6 +39,7 @@ st,bank-name = "GPIOB"; ngpios = <16>; gpio-ranges = <&pinctrl 0 16 16>; + status = "disabled"; }; gpioc: gpio@50004000 { @@ -50,6 +52,7 @@ st,bank-name = "GPIOC"; ngpios = <16>; gpio-ranges = <&pinctrl 0 32 16>; + status = "disabled"; }; gpiod: gpio@50005000 { @@ -62,6 +65,7 @@ st,bank-name = "GPIOD"; ngpios = <16>; gpio-ranges = <&pinctrl 0 48 16>; + status = "disabled"; }; gpioe: gpio@50006000 { @@ -74,6 +78,7 @@ st,bank-name = "GPIOE"; ngpios = <16>; gpio-ranges = <&pinctrl 0 64 16>; + status = "disabled"; }; gpiof: gpio@50007000 { @@ -86,6 +91,7 @@ st,bank-name = "GPIOF"; ngpios = <16>; gpio-ranges = <&pinctrl 0 80 16>; + status = "disabled"; }; gpiog: gpio@50008000 { @@ -98,6 +104,7 @@ st,bank-name = "GPIOG"; ngpios = <16>; gpio-ranges = <&pinctrl 0 96 16>; + status = "disabled"; }; gpioh: gpio@50009000 { @@ -110,6 +117,7 @@ st,bank-name = "GPIOH"; ngpios = <16>; gpio-ranges = <&pinctrl 0 112 16>; + status = "disabled"; }; gpioi: gpio@5000a000 { @@ -122,6 +130,7 @@ st,bank-name = "GPIOI"; ngpios = <16>; gpio-ranges = <&pinctrl 0 128 16>; + status = "disabled"; }; gpioj: gpio@5000b000 { @@ -134,6 +143,7 @@ st,bank-name = "GPIOJ"; ngpios = <16>; gpio-ranges = <&pinctrl 0 144 16>; + status = "disabled"; }; gpiok: gpio@5000c000 { @@ -146,6 +156,7 @@ st,bank-name = "GPIOK"; ngpios = <8>; gpio-ranges = <&pinctrl 0 160 8>; + status = "disabled"; }; cec_pins_a: cec-0 { @@ -178,6 +189,47 @@ }; }; + dcmi_pins_a: dcmi-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */ + <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, AF13)>,/* DCMI_D9 */ + <STM32_PINMUX('I', 3, AF13)>,/* DCMI_D10 */ + <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */ + bias-disable; + }; + }; + + dcmi_sleep_pins_a: dcmi-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */ + <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, ANALOG)>,/* DCMI_D9 */ + <STM32_PINMUX('I', 3, ANALOG)>,/* DCMI_D10 */ + <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */ + }; + }; + ethernet0_rgmii_pins_a: rgmii-0 { pins1 { pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ @@ -241,6 +293,23 @@ }; }; + i2c1_pins_b: i2c1-2 { + pins { + pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_sleep_b: i2c1-3 { + pins { + pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ + }; + }; + i2c2_pins_a: i2c2-0 { pins { pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */ @@ -258,6 +327,21 @@ }; }; + i2c2_pins_b1: i2c2-2 { + pins { + pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b1: i2c2-3 { + pins { + pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ + }; + }; + i2c5_pins_a: i2c5-0 { pins { pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */ @@ -276,6 +360,25 @@ }; }; + i2s2_pins_a: i2s2-0 { + pins { + pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */ + <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */ + <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + + i2s2_pins_sleep_a: i2s2-1 { + pins { + pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */ + <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */ + <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */ + }; + }; + ltdc_pins_a: ltdc-a-0 { pins { pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */ @@ -470,6 +573,12 @@ }; }; + qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */ + }; + }; + qspi_bk1_pins_a: qspi-bk1-0 { pins1 { pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ @@ -488,6 +597,16 @@ }; }; + qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */ + <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */ + }; + }; + qspi_bk2_pins_a: qspi-bk2-0 { pins1 { pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */ @@ -506,6 +625,89 @@ }; }; + qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */ + <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */ + <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */ + }; + }; + + sai2a_pins_a: sai2a-0 { + pins { + pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */ + <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */ + <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai2a_sleep_pins_a: sai2a-1 { + pins { + pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */ + <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */ + <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */ + }; + }; + + sai2b_pins_a: sai2b-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */ + <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */ + <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_a: sai2b-1 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */ + <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */ + <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */ + <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */ + }; + }; + + sai2b_pins_b: sai2b-2 { + pins { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_b: sai2b-3 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ + }; + }; + + sai4a_pins_a: sai4a-0 { + pins { + pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai4a_sleep_pins_a: sai4a-1 { + pins { + pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */ + }; + }; + sdmmc1_b4_pins_a: sdmmc1-b4-0 { pins { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ @@ -599,6 +801,34 @@ bias-disable; }; }; + + uart4_pins_b: uart4-1 { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart7_pins_a: uart7-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */ + <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */ + <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */ + bias-disable; + }; + }; }; pinctrl_z: pin-controller-z@54004000 { @@ -621,6 +851,22 @@ st,bank-ioport = <11>; ngpios = <8>; gpio-ranges = <&pinctrl_z 0 400 8>; + status = "disabled"; + }; + + i2c2_pins_b2: i2c2-0 { + pins { + pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b2: i2c2-1 { + pins { + pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */ + }; }; i2c4_pins_a: i2c4-0 { diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts new file mode 100644 index 000000000000..2e4742c53d04 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts @@ -0,0 +1,321 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) Linaro Ltd 2019 - All Rights Reserved + * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + */ + +/dts-v1/; + +#include "stm32mp157c.dtsi" +#include "stm32mp157xac-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + model = "Arrow Electronics STM32MP157A Avenger96 board"; + compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + mmc0 = &sdmmc1; + serial0 = &uart4; + serial1 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x40000000>; + }; + + led { + compatible = "gpio-leds"; + led1 { + label = "green:user1"; + gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led2 { + label = "green:user2"; + gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led3 { + label = "green:user3"; + gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led4 { + label = "green:user3"; + gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + + led5 { + label = "yellow:wifi"; + gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + led6 { + label = "blue:bt"; + gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@7 { + reg = <7>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_b>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_b1 &i2c2_pins_b2>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&exti 55 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + st,main-control-register = <0x04>; + st,vin-control-register = <0xc0>; + st,usb-control-register = <0x30>; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo1-supply = <&v3v3>; + ldo2-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo5-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask_reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + vdda: ldo1 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO1 0>; + interrupt-parent = <&pmic>; + }; + + v2v8: ldo2 { + regulator-name = "v2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + interrupts = <IT_CURLIM_LDO2 0>; + interrupt-parent = <&pmic>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + interrupt-parent = <&pmic>; + }; + + vdd_sd: ldo5 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + interrupt-parent = <&pmic>; + regulator-boot-on; + }; + + v1v8: ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO6 0>; + interrupt-parent = <&pmic>; + regulator-enable-ramp-delay = <300000>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + interrupt-parent = <&pmic>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + interrupt-parent = <&pmic>; + regulator-active-discharge; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + interrupt-parent = <&pmic>; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,sig-dir; + st,neg-edge; + st,use-ckin; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + status = "okay"; +}; + +&uart4 { + /* On Low speed expansion header */ + label = "LS-UART1"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_b>; + status = "okay"; +}; + +&uart7 { + /* On Low speed expansion header */ + label = "LS-UART0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index 098dbfb06b61..f3f0e37aad4d 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -7,7 +7,7 @@ /dts-v1/; #include "stm32mp157c.dtsi" -#include "stm32mp157-pinctrl.dtsi" +#include "stm32mp157xac-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> @@ -28,6 +28,17 @@ reg = <0xc0000000 0x20000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpu_reserved: gpu@d4000000 { + reg = <0xd4000000 0x4000000>; + no-map; + }; + }; + led { compatible = "gpio-leds"; blue { @@ -51,7 +62,7 @@ pinctrl-0 = <ðernet0_rgmii_pins_a>; pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; pinctrl-names = "default", "sleep"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; max-speed = <1000>; phy-handle = <&phy0>; @@ -65,6 +76,47 @@ }; }; +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_pins_sleep_a>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + hdmi-transmitter@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + iovcc-supply = <&v3v3_hdmi>; + cvcc12-supply = <&v1v2_hdmi>; + reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpiog>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_a>; + pinctrl-1 = <<dc_pins_sleep_a>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sii9022_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + }; + }; +}; &i2c4 { pinctrl-names = "default"; @@ -223,6 +275,20 @@ status = "okay"; }; +<dc { + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&sii9022_in>; + }; + }; +}; + &rng1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 62a8c78e7e2e..4fe7f71a74d3 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -6,7 +6,7 @@ /dts-v1/; #include "stm32mp157c.dtsi" -#include "stm32mp157-pinctrl.dtsi" +#include "stm32mp157xaa-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> @@ -23,6 +23,17 @@ reg = <0xC0000000 0x40000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpu_reserved: gpu@e8000000 { + reg = <0xe8000000 0x8000000>; + no-map; + }; + }; + aliases { serial0 = &uart4; }; @@ -61,6 +72,11 @@ status = "okay"; }; +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index b6aca40b9b90..feb8f7727270 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -7,6 +7,7 @@ #include "stm32mp157c-ed1.dts" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "STMicroelectronics STM32MP157C eval daughter on eval mother"; @@ -21,6 +22,51 @@ ethernet0 = ðernet0; }; + clocks { + clk_ext_camera: clk-ext-camera { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + joystick { + compatible = "gpio-keys"; + #size-cells = <0>; + pinctrl-0 = <&joystick_pins>; + pinctrl-names = "default"; + button-0 { + label = "JoySel"; + linux,code = <KEY_ENTER>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + }; + button-1 { + label = "JoyDown"; + linux,code = <KEY_DOWN>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <1 IRQ_TYPE_EDGE_RISING>; + }; + button-2 { + label = "JoyLeft"; + linux,code = <KEY_LEFT>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + }; + button-3 { + label = "JoyRight"; + linux,code = <KEY_RIGHT>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + }; + button-4 { + label = "JoyUp"; + linux,code = <KEY_UP>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + }; + }; + panel_backlight: panel-backlight { compatible = "gpio-backlight"; gpios = <&gpiod 13 GPIO_ACTIVE_LOW>; @@ -35,6 +81,23 @@ status = "okay"; }; +&dcmi { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcmi_pins_a>; + pinctrl-1 = <&dcmi_sleep_pins_a>; + + port { + dcmi_0: endpoint { + remote-endpoint = <&ov5640_0>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; +}; + &dsi { #address-cells = <1>; #size-cells = <0>; @@ -64,6 +127,7 @@ reg = <0>; reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>; backlight = <&panel_backlight>; + power-supply = <&v3v3>; status = "okay"; port { @@ -79,7 +143,7 @@ pinctrl-0 = <ðernet0_rgmii_pins_a>; pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; pinctrl-names = "default", "sleep"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; max-speed = <1000>; phy-handle = <&phy0>; @@ -99,6 +163,60 @@ i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&ov5640_pins>; + reg = <0x3c>; + clocks = <&clk_ext_camera>; + clock-names = "xclk"; + DOVDD-supply = <&v2v8>; + powerdown-gpios = <&stmfx_pinctrl 18 GPIO_ACTIVE_HIGH>; + reset-gpios = <&stmfx_pinctrl 19 GPIO_ACTIVE_LOW>; + rotation = <180>; + status = "okay"; + + port { + ov5640_0: endpoint { + remote-endpoint = <&dcmi_0>; + bus-width = <8>; + data-shift = <2>; /* lines 9:2 are used */ + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; + }; + + stmfx: stmfx@42 { + compatible = "st,stmfx-0300"; + reg = <0x42>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpioi>; + vdd-supply = <&v3v3>; + + stmfx_pinctrl: stmfx-pin-controller { + compatible = "st,stmfx-0300-pinctrl"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&stmfx_pinctrl 0 0 24>; + + joystick_pins: joystick { + pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; + drive-push-pull; + bias-pull-down; + }; + + ov5640_pins: camera { + pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */ + drive-push-pull; + output-low; + }; + }; + }; }; &i2c5 { @@ -131,14 +249,16 @@ }; &qspi { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; #address-cells = <1>; #size-cells = <0>; status = "okay"; flash0: mx66l51235l@0 { + compatible = "jedec,spi-nor"; reg = <0>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; @@ -147,6 +267,7 @@ }; flash1: mx66l51235l@1 { + compatible = "jedec,spi-nor"; reg = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index 2afeee65c3ea..0c4e6ebc3529 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -365,6 +365,17 @@ status = "disabled"; }; + i2s2: audio-controller@4000b000 { + compatible = "st,stm32h7-i2s"; + #sound-dai-cells = <0>; + reg = <0x4000b000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 39 0x400 0x01>, + <&dmamux1 40 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + spi3: spi@4000c000 { #address-cells = <1>; #size-cells = <0>; @@ -379,6 +390,17 @@ status = "disabled"; }; + i2s3: audio-controller@4000c000 { + compatible = "st,stm32h7-i2s"; + #sound-dai-cells = <0>; + reg = <0x4000c000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 61 0x400 0x01>, + <&dmamux1 62 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + spdifrx: audio-controller@4000d000 { compatible = "st,stm32h7-spdifrx"; #sound-dai-cells = <0>; @@ -607,6 +629,17 @@ status = "disabled"; }; + i2s1: audio-controller@44004000 { + compatible = "st,stm32h7-i2s"; + #sound-dai-cells = <0>; + reg = <0x44004000 0x400>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 37 0x400 0x01>, + <&dmamux1 38 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + spi4: spi@44005000 { #address-cells = <1>; #size-cells = <0>; @@ -708,6 +741,100 @@ status = "disabled"; }; + sai1: sai@4400a000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400a000 0x400>; + reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI1_R>; + status = "disabled"; + + sai1a: audio-controller@4400a004 { + #sound-dai-cells = <0>; + + compatible = "st,stm32-sai-sub-a"; + reg = <0x4 0x1c>; + clocks = <&rcc SAI1_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 87 0x400 0x01>; + status = "disabled"; + }; + + sai1b: audio-controller@4400a024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x1c>; + clocks = <&rcc SAI1_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 88 0x400 0x01>; + status = "disabled"; + }; + }; + + sai2: sai@4400b000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400b000 0x400>; + reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI2_R>; + status = "disabled"; + + sai2a: audio-controller@4400b004 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-a"; + reg = <0x4 0x1c>; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 89 0x400 0x01>; + status = "disabled"; + }; + + sai2b: audio-controller@4400b024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x1c>; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 90 0x400 0x01>; + status = "disabled"; + }; + }; + + sai3: sai@4400c000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400c000 0x400>; + reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI3_R>; + status = "disabled"; + + sai3a: audio-controller@4400c004 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-a"; + reg = <0x04 0x1c>; + clocks = <&rcc SAI3_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 113 0x400 0x01>; + status = "disabled"; + }; + + sai3b: audio-controller@4400c024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x1c>; + clocks = <&rcc SAI3_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 114 0x400 0x01>; + status = "disabled"; + }; + }; + dfsdm: dfsdm@4400d000 { compatible = "st,stm32mp1-dfsdm"; reg = <0x4400d000 0x800>; @@ -914,6 +1041,18 @@ status = "disabled"; }; + dcmi: dcmi@4c006000 { + compatible = "st,stm32-dcmi"; + reg = <0x4c006000 0x400>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc CAMITF_R>; + clocks = <&rcc DCMI>; + clock-names = "mclk"; + dmas = <&dmamux1 75 0x400 0x0d>; + dma-names = "tx"; + status = "disabled"; + }; + rcc: rcc@50000000 { compatible = "st,stm32mp1-rcc", "syscon"; reg = <0x50000000 0x1000>; @@ -1020,6 +1159,37 @@ status = "disabled"; }; + sai4: sai@50027000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50027000 0x400>; + reg = <0x50027000 0x4>, <0x500273f0 0x10>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI4_R>; + status = "disabled"; + + sai4a: audio-controller@50027004 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-a"; + reg = <0x04 0x1c>; + clocks = <&rcc SAI4_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 99 0x400 0x01>; + status = "disabled"; + }; + + sai4b: audio-controller@50027024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x1c>; + clocks = <&rcc SAI4_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 100 0x400 0x01>; + status = "disabled"; + }; + }; + dts: thermal@50028000 { compatible = "st,stm32-thermal"; reg = <0x50028000 0x100>; @@ -1149,6 +1319,16 @@ status = "disabled"; }; + gpu: gpu@59000000 { + compatible = "vivante,gc"; + reg = <0x59000000 0x800>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc GPU>, <&rcc GPU_K>; + clock-names = "bus" ,"core"; + resets = <&rcc GPU_R>; + status = "disabled"; + }; + dsi: dsi@5a000000 { compatible = "st,stm32-dsi"; reg = <0x5a000000 0x800>; diff --git a/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi new file mode 100644 index 000000000000..875adf5e1e30 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> + */ + +#include "stm32mp157-pinctrl.dtsi" +/ { + soc { + pinctrl: pin-controller@50002000 { + st,package = <STM32MP_PKG_AA>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@5000b000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@5000c000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + }; + }; + + pinctrl_z: pin-controller-z@54004000 { + st,package = <STM32MP_PKG_AA>; + + gpioz: gpio@54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi new file mode 100644 index 000000000000..961fa12a59c3 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> + */ + +#include "stm32mp157-pinctrl.dtsi" +/ { + soc { + pinctrl: pin-controller@50002000 { + st,package = <STM32MP_PKG_AB>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi new file mode 100644 index 000000000000..26600f188d25 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> + */ + +#include "stm32mp157-pinctrl.dtsi" +/ { + soc { + pinctrl: pin-controller@50002000 { + st,package = <STM32MP_PKG_AC>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 0 128 12>; + }; + }; + + pinctrl_z: pin-controller-z@54004000 { + st,package = <STM32MP_PKG_AC>; + + gpioz: gpio@54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi new file mode 100644 index 000000000000..910113f3e69a --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> + */ + +#include "stm32mp157-pinctrl.dtsi" +/ { + soc { + pinctrl: pin-controller@50002000 { + st,package = <STM32MP_PKG_AD>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts index d003b895a696..4c20d731a9c6 100644 --- a/arch/arm/boot/dts/sun5i-gr8-evb.dts +++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts @@ -150,7 +150,7 @@ }; pcf8563: rtc@51 { - compatible = "phg,pcf8563"; + compatible = "nxp,pcf8563"; reg = <0x51>; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index c04efad81bbc..dcddc3392460 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -216,6 +216,7 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; clock-output-names = "osc24M"; }; @@ -223,7 +224,8 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; + clock-accuracy = <50000>; + clock-output-names = "ext_osc32k"; }; /* @@ -588,7 +590,7 @@ ccu: clock@1c20000 { compatible = "allwinner,sun6i-a31-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -601,7 +603,7 @@ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -987,6 +989,8 @@ dma-names = "rx", "tx"; resets = <&ccu RST_AHB1_SPI0>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; spi1: spi@1c69000 { @@ -999,6 +1003,8 @@ dma-names = "rx", "tx"; resets = <&ccu RST_AHB1_SPI1>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; spi2: spi@1c6a000 { @@ -1011,6 +1017,8 @@ dma-names = "rx", "tx"; resets = <&ccu RST_AHB1_SPI2>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; spi3: spi@1c6b000 { @@ -1023,6 +1031,8 @@ dma-names = "rx", "tx"; resets = <&ccu RST_AHB1_SPI3>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; gic: interrupt-controller@1c81000 { @@ -1279,10 +1289,13 @@ }; rtc: rtc@1f00000 { + #clock-cells = <1>; compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc32k>; + clock-output-names = "osc32k"; }; nmi_intc: interrupt-controller@1f00c00 { @@ -1300,7 +1313,7 @@ ar100: ar100_clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>, + clocks = <&rtc 0>, <&osc24M>, <&ccu CLK_PLL_PERIPH>, <&ccu CLK_PLL_PERIPH>; clock-output-names = "ar100"; @@ -1335,7 +1348,7 @@ ir_clk: ir_clk { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; - clocks = <&osc32k>, <&osc24M>; + clocks = <&rtc 0>, <&osc24M>; clock-output-names = "ir"; }; @@ -1365,7 +1378,7 @@ reg = <0x01f02c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; + clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; resets = <&apb0_rst 0>; gpio-controller; diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts index 949494730aee..7449aac3f43b 100644 --- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts +++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts @@ -49,7 +49,8 @@ / { model = "ICnova-A20 SWAC"; - compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20"; + compatible = "incircuit,icnova-a20-swac", "incircuit,icnova-a20", + "allwinner,sun7i-a20"; aliases { serial0 = &uart0; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 95c6f8949076..56f451c07f93 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -194,6 +194,14 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 66d078053d5f..568b90ece342 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -224,14 +224,14 @@ vref-supply = <®_aldo2>; status = "okay"; - button@210 { + button-210 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <210000>; }; - button@410 { + button-410 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 392b0cabbf0d..ada6d08bc540 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -679,6 +679,20 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + /omit-if-no-ref/ + csi_8bit_parallel_pins: csi-8bit-parallel-pins { + pins = "PE0", "PE2", "PE3", "PE6", "PE7", + "PE8", "PE9", "PE10", "PE11", + "PE12", "PE13"; + function = "csi"; + }; + + /omit-if-no-ref/ + csi_mclk_pin: csi-mclk-pin { + pins = "PE1"; + function = "csi"; + }; + emac_rgmii_pins: emac-rgmii-pins { pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD11", "PD12", "PD13", "PD14", "PD18", @@ -997,6 +1011,21 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; }; + csi: camera@1cb0000 { + compatible = "allwinner,sun8i-a83t-csi"; + reg = <0x01cb0000 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + status = "disabled"; + + csi_in: port { + }; + }; + hdmi: hdmi@1ee0000 { compatible = "allwinner,sun8i-a83t-dw-hdmi"; reg = <0x01ee0000 0x10000>; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index 78a37a47185a..d277d043031b 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -59,8 +59,7 @@ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ enable-active-high; gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0>, <1300000 1>; }; wifi_pwrseq: wifi_pwrseq { diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index 4970eda2877e..f19ed981da9d 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -102,8 +102,7 @@ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ enable-active-high; gpios-states = <1>; - states = <1100000 0 - 1300000 1>; + states = <1100000 0>, <1300000 1>; }; wifi_pwrseq: wifi_pwrseq { diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index 6277f13f3eb3..ac9e26b1d906 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -90,6 +90,8 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; sound_spdif { @@ -155,6 +157,8 @@ &mmc1 { vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 840849169bed..4759ba3f2986 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -109,8 +109,7 @@ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ enable-active-high; gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0>, <1300000 1>; }; }; diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index c488aaacbd68..42d62d1ba1dc 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -201,10 +201,15 @@ &pio { pinctrl-names = "default"; pinctrl-0 = <&clk_out_a_pin>; + vcc-pa-supply = <®_aldo2>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_eldo1>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_dldo1>; }; ®_aldo2 { - regulator-always-on; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-name = "vcc-pa"; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index bb856e53b806..6007d0cc252d 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -318,8 +318,7 @@ }; rtc: rtc@1c20400 { - compatible = "allwinner,sun8i-r40-rtc", - "allwinner,sun8i-h3-rtc"; + compatible = "allwinner,sun8i-r40-rtc"; reg = <0x01c20400 0x400>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clock-output-names = "osc32k", "osc32k-out"; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index df72b1719c34..d7aef128acb3 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -84,6 +84,7 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; clock-output-names = "osc24M"; }; @@ -91,7 +92,8 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; + clock-accuracy = <50000>; + clock-output-names = "ext-osc32k"; }; }; @@ -264,17 +266,20 @@ ccu: clock@1c20000 { compatible = "allwinner,sun8i-v3s-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; }; rtc: rtc@1c20400 { - compatible = "allwinner,sun6i-a31-rtc"; + #clock-cells = <1>; + compatible = "allwinner,sun8i-v3-rtc"; reg = <0x01c20400 0x54>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc32k>; + clock-output-names = "osc32k", "osc32k-out"; }; pio: pinctrl@1c20800 { @@ -282,7 +287,7 @@ reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts index f05cabd34b8e..15c22b06fc4b 100644 --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts @@ -50,6 +50,7 @@ compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40"; aliases { + ethernet0 = &gmac; serial0 = &uart0; }; @@ -57,6 +58,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -84,14 +96,52 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ + clocks = <&ccu CLK_OUTA>; + clock-names = "ext_clock"; }; }; +&ahci { + ahci-supply = <®_dldo4>; + phy-supply = <®_eldo3>; + status = "okay"; +}; + +&de { + status = "okay"; +}; + &ehci1 { /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */ status = "okay"; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_rgmii_pins>; + phy-handle = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_dc1sw>; + status = "okay"; +}; + +&gmac_mdio { + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { status = "okay"; @@ -123,6 +173,23 @@ status = "okay"; }; +&pio { + pinctrl-names = "default"; + pinctrl-0 = <&clk_out_a_pin>; + vcc-pa-supply = <®_aldo2>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_eldo1>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_dldo1>; +}; + +®_aldo2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pa"; +}; + ®_aldo3 { regulator-always-on; regulator-min-microvolt = <2700000>; @@ -130,6 +197,12 @@ regulator-name = "avcc"; }; +®_dc1sw { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-gmac-phy"; +}; + ®_dcdc1 { regulator-always-on; regulator-min-microvolt = <3000000>; @@ -164,18 +237,68 @@ regulator-name = "vcc-wifi-io"; }; +/* + * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same + * time, with the two being in sync, to be able to meet maximum power + * consumption during transmits. Since this is not really supported + * right now, just use the two as always on, and we will fix it later. + */ + ®_dldo2 { + regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-wifi"; }; +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; +}; + +®_dldo4 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vdd2v5-sata"; +}; + +®_eldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd1v2-sata"; +}; + +&tcon_tv0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&ccu CLK_OUTA>; + clock-names = "lpo"; + vbat-supply = <®_dldo2>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + /* TODO host wake line connected to PMIC GPIO pins */ + shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ + max-speed = <1500000>; + }; +}; + &usbphy { usb1_vbus-supply = <®_vcc5v0>; status = "okay"; diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi index 53edd1faee99..22466afd38a3 100644 --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi @@ -21,8 +21,7 @@ regulator-ramp-delay = <50>; /* 4ms */ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0>, <1300000 1>; }; }; diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts index 3aaca10f6644..f2d060f403cc 100644 --- a/arch/arm/boot/dts/uniphier-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts @@ -77,4 +77,8 @@ &nand { status = "okay"; + + nand@0 { + reg = <0>; + }; }; diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index c2706cef0b8a..58cd4e8fa5be 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -403,9 +403,11 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand2cs>; + pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index 3d9080ee7aef..60994b6e8b99 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -90,4 +90,8 @@ &nand { status = "okay"; + + nand@0 { + reg = <0>; + }; }; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 28038b17bbb3..854f2eba3e72 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -98,4 +98,8 @@ &nand { status = "okay"; + + nand@0 { + reg = <0>; + }; }; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 97d051ef4968..7f64e5a616d6 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -593,6 +593,8 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index 365738739412..eff74717b37c 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -458,9 +458,11 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand2cs>; + pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 06a049f6edf8..4eddbb8d7fca 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -766,9 +766,11 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand2cs>; + pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts index 01bf94c6b93a..cf9ea0b15065 100644 --- a/arch/arm/boot/dts/uniphier-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts @@ -81,4 +81,8 @@ &nand { status = "okay"; + + nand@0 { + reg = <0>; + }; }; diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index efce02768b6f..cbebb6e4c616 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -407,9 +407,11 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand2cs>; + pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 269e6bf99ccb..37bd41ff8dff 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -161,6 +161,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x34000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; i2c0: i2c@10002000 { diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index d3963e9eaf48..d6a1fc269241 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -30,11 +30,14 @@ #interrupt-cells = <1>; ranges; - flash@0,00000000 { + nor_flash: flash@0,00000000 { compatible = "arm,vexpress-flash", "cfi-flash"; reg = <0 0x00000000 0x04000000>, <4 0x00000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; psram@1,00000000 { diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index 798c97aff7fa..8e57e15307e2 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -35,6 +35,9 @@ reg = <0 0x00000000 0x04000000>, <1 0x00000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; psram@2,00000000 { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 00cd9f5bef2e..1de0a658adf1 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -440,7 +440,7 @@ /* non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell". */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -471,7 +471,7 @@ }; funnel@20040000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x20040000 0 0x1000>; clocks = <&oscclk6a>; @@ -680,3 +680,12 @@ <0 3 &gic 0 39 4>; }; }; + +&nor_flash { + /* + * Unfortunately, accessing the flash disturbs the CPU idle states + * (suspend) and CPU hotplug of this platform. For this reason, flash + * hardware access is disabled by default on this platform alone. + */ + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi index 0507e6dcbb21..a1b4ccee2a10 100644 --- a/arch/arm/boot/dts/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -177,6 +177,36 @@ status = "okay"; }; +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi0>; + status = "okay"; + + /* + * Attached MT25QL02 can go up to 90Mhz in DTR and 166 in STR + * modes, so, spi-max-frequency is limited to 90MHz + */ + flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <90000000>; + spi-rx-bus-width = <4>; + reg = <0>; + m25p,fast-read; + }; + + flash@2 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <90000000>; + spi-rx-bus-width = <4>; + reg = <2>; + m25p,fast-read; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; @@ -360,12 +390,18 @@ pinctrl_qspi0: qspi0grp { fsl,pins = < - VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3 - VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff - VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3 - VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3 - VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3 - VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3 + VF610_PAD_PTD0__QSPI0_A_QSCK 0x38c2 + VF610_PAD_PTD1__QSPI0_A_CS0 0x38c2 + VF610_PAD_PTD2__QSPI0_A_DATA3 0x38c3 + VF610_PAD_PTD3__QSPI0_A_DATA2 0x38c3 + VF610_PAD_PTD4__QSPI0_A_DATA1 0x38c3 + VF610_PAD_PTD5__QSPI0_A_DATA0 0x38c3 + VF610_PAD_PTD7__QSPI0_B_QSCK 0x38c2 + VF610_PAD_PTD8__QSPI0_B_CS0 0x38c2 + VF610_PAD_PTD9__QSPI0_B_DATA3 0x38c3 + VF610_PAD_PTD10__QSPI0_B_DATA2 0x38c3 + VF610_PAD_PTD11__QSPI0_B_DATA1 0x38c3 + VF610_PAD_PTD12__QSPI0_B_DATA0 0x38c3 >; }; @@ -385,8 +421,8 @@ pinctrl_uart2: uart2grp { fsl,pins = < - VF610_PAD_PTD0__UART2_TX 0x21a2 - VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD23__UART2_TX 0x21a2 + VF610_PAD_PTD22__UART2_RX 0x21a1 >; }; diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index e24ad60891b2..8a9aeeb504dd 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -21,7 +21,7 @@ /* * The public API for this code is documented in arch/arm/include/asm/mcpm.h. * For a comprehensive description of the main algorithm used here, please - * see Documentation/arm/cluster-pm-race-avoidance.txt. + * see Documentation/arm/cluster-pm-race-avoidance.rst. */ struct sync_struct mcpm_sync; diff --git a/arch/arm/common/mcpm_head.S b/arch/arm/common/mcpm_head.S index d5bd75dd576d..291d969bc719 100644 --- a/arch/arm/common/mcpm_head.S +++ b/arch/arm/common/mcpm_head.S @@ -5,7 +5,7 @@ * Created by: Nicolas Pitre, March 2012 * Copyright: (C) 2012-2013 Linaro Limited * - * Refer to Documentation/arm/cluster-pm-race-avoidance.txt + * Refer to Documentation/arm/cluster-pm-race-avoidance.rst * for details of the synchronisation algorithms used here. */ diff --git a/arch/arm/common/vlock.S b/arch/arm/common/vlock.S index 9675cc15d0c4..f1c7fd44f1b1 100644 --- a/arch/arm/common/vlock.S +++ b/arch/arm/common/vlock.S @@ -6,7 +6,7 @@ * Copyright: (C) 2012-2013 Linaro Limited * * This algorithm is described in more detail in - * Documentation/arm/vlocks.txt. + * Documentation/arm/vlocks.rst. */ #include <linux/linkage.h> diff --git a/arch/arm/configs/acs5k_defconfig b/arch/arm/configs/acs5k_defconfig index d04ee19e5b75..bcb8bda09158 100644 --- a/arch/arm/configs/acs5k_defconfig +++ b/arch/arm/configs/acs5k_defconfig @@ -30,7 +30,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y # CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y diff --git a/arch/arm/configs/acs5k_tiny_defconfig b/arch/arm/configs/acs5k_tiny_defconfig index 25c593df41d1..e802cdebfd0b 100644 --- a/arch/arm/configs/acs5k_tiny_defconfig +++ b/arch/arm/configs/acs5k_tiny_defconfig @@ -25,7 +25,6 @@ CONFIG_INET=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig index 8c9b6ea46188..622436f44783 100644 --- a/arch/arm/configs/am200epdkit_defconfig +++ b/arch/arm/configs/am200epdkit_defconfig @@ -37,7 +37,6 @@ CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig index 190d6e9d3296..019828d7b251 100644 --- a/arch/arm/configs/aspeed_g4_defconfig +++ b/arch/arm/configs/aspeed_g4_defconfig @@ -64,7 +64,6 @@ CONFIG_VLAN_8021Q=y CONFIG_NET_NCSI=y CONFIG_BPF_STREAM_PARSER=y # CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set @@ -78,8 +77,6 @@ CONFIG_MTD_UBI=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_MTD_UBI_BLOCK=y CONFIG_BLK_DEV_LOOP=y -CONFIG_ASPEED_LPC_CTRL=y -CONFIG_ASPEED_LPC_SNOOP=y CONFIG_EEPROM_AT24=y CONFIG_NETDEVICES=y CONFIG_NETCONSOLE=y @@ -169,6 +166,10 @@ CONFIG_SENSORS_UCD9200=y CONFIG_SENSORS_TMP421=y CONFIG_SENSORS_W83773G=y CONFIG_WATCHDOG_SYSFS=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_ASPEED=y CONFIG_DRM=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y @@ -207,8 +208,12 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_PCF8523=y CONFIG_RTC_DRV_RV8803=y +CONFIG_RTC_DRV_ASPEED=y # CONFIG_VIRTIO_MENU is not set # CONFIG_IOMMU_SUPPORT is not set +CONFIG_ASPEED_LPC_CTRL=y +CONFIG_ASPEED_LPC_SNOOP=y +CONFIG_ASPEED_P2A_CTRL=y CONFIG_IIO=y CONFIG_ASPEED_ADC=y CONFIG_MAX1363=y diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig index 407ffb7655a8..28fe392c7dfa 100644 --- a/arch/arm/configs/aspeed_g5_defconfig +++ b/arch/arm/configs/aspeed_g5_defconfig @@ -64,7 +64,6 @@ CONFIG_VLAN_8021Q=y CONFIG_NET_NCSI=y CONFIG_BPF_STREAM_PARSER=y # CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set @@ -78,8 +77,6 @@ CONFIG_MTD_UBI=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_MTD_UBI_BLOCK=y CONFIG_BLK_DEV_LOOP=y -CONFIG_ASPEED_LPC_CTRL=y -CONFIG_ASPEED_LPC_SNOOP=y CONFIG_EEPROM_AT24=y CONFIG_NETDEVICES=y CONFIG_NETCONSOLE=y @@ -169,7 +166,12 @@ CONFIG_SENSORS_UCD9200=y CONFIG_SENSORS_TMP421=y CONFIG_SENSORS_W83773G=y CONFIG_WATCHDOG_SYSFS=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_ASPEED=y CONFIG_DRM=y +CONFIG_DRM_ASPEED_GFX=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DYNAMIC_MINORS=y @@ -203,16 +205,23 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_EDAC=y +CONFIG_EDAC_ASPEED=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_PCF8523=y CONFIG_RTC_DRV_RV8803=y +CONFIG_RTC_DRV_ASPEED=y # CONFIG_VIRTIO_MENU is not set # CONFIG_IOMMU_SUPPORT is not set +CONFIG_ASPEED_LPC_CTRL=y +CONFIG_ASPEED_LPC_SNOOP=y +CONFIG_ASPEED_P2A_CTRL=y CONFIG_IIO=y CONFIG_ASPEED_ADC=y CONFIG_MAX1363=y CONFIG_BMP280=y +CONFIG_RAS=y CONFIG_FSI=y CONFIG_FSI_MASTER_GPIO=y CONFIG_FSI_MASTER_HUB=y diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index a88e31449880..309c55a8d107 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -46,7 +46,6 @@ CONFIG_IP_PNP_RARP=y CONFIG_IPV6_SIT_6RD=y CONFIG_CFG80211=y CONFIG_MAC80211=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set diff --git a/arch/arm/configs/axm55xx_defconfig b/arch/arm/configs/axm55xx_defconfig index 53864316bee1..31bfe1647d28 100644 --- a/arch/arm/configs/axm55xx_defconfig +++ b/arch/arm/configs/axm55xx_defconfig @@ -78,7 +78,6 @@ CONFIG_INET_IPCOMP=y CONFIG_NETWORK_PHY_TIMESTAMPING=y CONFIG_BRIDGE=y # CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig index 5344434df652..fa997ae2673e 100644 --- a/arch/arm/configs/cm_x2xx_defconfig +++ b/arch/arm/configs/cm_x2xx_defconfig @@ -45,7 +45,6 @@ CONFIG_BT_RFCOMM=m CONFIG_BT_BNEP=m CONFIG_BT_HIDP=m CONFIG_LIB80211=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_FW_LOADER=m CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y @@ -103,7 +102,6 @@ CONFIG_FB=y CONFIG_FB_PXA=y CONFIG_FB_PXA_PARAMETERS=y CONFIG_FB_MBX=m -CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set # CONFIG_BACKLIGHT_CLASS_DEVICE is not set # CONFIG_VGA_CONSOLE is not set diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index 3707a014cbc4..2f7acde2d921 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -45,7 +45,6 @@ CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_HIDP=m CONFIG_BT_HCIBTUSB=m CONFIG_LIB80211=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_RAW_NAND=y @@ -86,7 +85,6 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_DA903X=y CONFIG_FB=y CONFIG_FB_PXA=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_TDO24M=y # CONFIG_BACKLIGHT_GENERIC is not set diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig index 419b73564f29..89df0a55a065 100644 --- a/arch/arm/configs/cns3420vb_defconfig +++ b/arch/arm/configs/cns3420vb_defconfig @@ -27,7 +27,6 @@ CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait" -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig index 8d484e4d51cc..52bad9a544a0 100644 --- a/arch/arm/configs/colibri_pxa270_defconfig +++ b/arch/arm/configs/colibri_pxa270_defconfig @@ -49,7 +49,6 @@ CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_HIDP=m CONFIG_CFG80211=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_CONNECTOR=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y @@ -102,7 +101,6 @@ CONFIG_WATCHDOG=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_PXA=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_VGA_CONSOLE is not set diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig index d282e8b0bf33..446134c70a33 100644 --- a/arch/arm/configs/colibri_pxa300_defconfig +++ b/arch/arm/configs/colibri_pxa300_defconfig @@ -14,7 +14,6 @@ CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_SYN_COOKIES=y CONFIG_IPV6=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y @@ -33,7 +32,6 @@ CONFIG_DEBUG_GPIO=y # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_PXA=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index d398ae53aba7..e6df11e906ba 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -63,7 +63,6 @@ CONFIG_MCP_UCB1200_TS=y CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_SA1100=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index d99725984947..e4f6442588e7 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -81,7 +81,6 @@ CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -132,7 +131,6 @@ CONFIG_SPI=y CONFIG_SPI_PXA2XX=y CONFIG_FB=y CONFIG_FB_W100=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_CORGI=y CONFIG_BACKLIGHT_CLASS_DEVICE=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 4a8cad4d3707..9a32a8c0f873 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -45,6 +45,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=m CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m +CONFIG_CPUFREQ_DT=m CONFIG_CPU_IDLE=y CONFIG_NET=y CONFIG_PACKET=y diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index 2f01e84b3d8c..e70c997d5f4c 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -31,7 +31,6 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig index 61228a25ba8d..d08f02014755 100644 --- a/arch/arm/configs/em_x270_defconfig +++ b/arch/arm/configs/em_x270_defconfig @@ -41,7 +41,6 @@ CONFIG_BT_BNEP=m CONFIG_BT_HIDP=m CONFIG_BT_HCIBTUSB=m CONFIG_LIB80211=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_FW_LOADER=m CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y @@ -101,7 +100,6 @@ CONFIG_FB=y CONFIG_FB_PXA=y CONFIG_FB_PXA_PARAMETERS=y CONFIG_FB_MBX=m -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_TDO24M=y # CONFIG_BACKLIGHT_GENERIC is not set diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 14889a785f07..ef2d2a820c30 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -50,7 +50,6 @@ CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_IPV6_SIT is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig index b85575867d21..56452fa03d56 100644 --- a/arch/arm/configs/eseries_pxa_defconfig +++ b/arch/arm/configs/eseries_pxa_defconfig @@ -40,7 +40,6 @@ CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_MAC80211_RC_PID=y # CONFIG_MAC80211_RC_MINSTREL is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_MTD=m CONFIG_MTD_RAW_NAND=m @@ -74,7 +73,6 @@ CONFIG_MFD_TC6393XB=y CONFIG_FB=y CONFIG_FB_PXA=y CONFIG_FB_W100=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_VGA_CONSOLE is not set diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 9b959afaaa12..2e6a863d25aa 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -1,22 +1,16 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_PERF_EVENTS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_EXYNOS=y -CONFIG_ARCH_EXYNOS3=y CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND=y CONFIG_SMP=y CONFIG_BIG_LITTLE=y CONFIG_NR_CPUS=8 -CONFIG_PREEMPT=y -CONFIG_AEABI=y CONFIG_HIGHMEM=y -CONFIG_CMA=y CONFIG_SECCOMP=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -38,6 +32,16 @@ CONFIG_NEON=y CONFIG_KERNEL_MODE_NEON=y CONFIG_PM_DEBUG=y CONFIG_PM_ADVANCED_DEBUG=y +CONFIG_ARM_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM_NEON=m +CONFIG_CRYPTO_SHA256_ARM=m +CONFIG_CRYPTO_SHA512_ARM=m +CONFIG_CRYPTO_AES_ARM_BS=m +CONFIG_CRYPTO_CHACHA20_NEON=m +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -61,10 +65,7 @@ CONFIG_BT_HCIBTSDIO=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_BCSP=y CONFIG_BT_HCIUART_ATH3K=y -CONFIG_BT_HCIUART_3WIRE=y CONFIG_BT_HCIUART_INTEL=y -CONFIG_BT_HCIUART_BCM=y -CONFIG_BT_HCIUART_QCA=y CONFIG_BT_HCIUART_AG6XX=y CONFIG_BT_HCIUART_MRVL=y CONFIG_BT_HCIBCM203X=m @@ -87,8 +88,6 @@ CONFIG_NFC_SHDLC=y CONFIG_NFC_S3FWRN5_I2C=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=96 CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y @@ -156,8 +155,6 @@ CONFIG_THERMAL_EMULATION=y CONFIG_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y CONFIG_MFD_CROS_EC=y -CONFIG_CROS_EC_I2C=y -CONFIG_CROS_EC_SPI=y CONFIG_MFD_MAX14577=y CONFIG_MFD_MAX77686=y CONFIG_MFD_MAX77693=y @@ -216,6 +213,8 @@ CONFIG_DRM_NXP_PTN3460=y CONFIG_DRM_PARADE_PS8622=y CONFIG_DRM_SII9234=y CONFIG_DRM_TOSHIBA_TC358764=y +CONFIG_DRM_LIMA=y +CONFIG_DRM_PANFROST=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_PWM=y @@ -283,16 +282,16 @@ CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_S3C=y CONFIG_DMADEVICES=y CONFIG_PL330_DMA=y -CONFIG_CROS_EC_CHARDEV=y +CONFIG_CROS_EC_I2C=y +CONFIG_CROS_EC_SPI=y CONFIG_COMMON_CLK_MAX77686=y CONFIG_COMMON_CLK_S2MPS11=y -CONFIG_PM_DEVFREQ=y +CONFIG_EXYNOS_IOMMU=y CONFIG_DEVFREQ_GOV_PERFORMANCE=y CONFIG_DEVFREQ_GOV_POWERSAVE=y CONFIG_DEVFREQ_GOV_USERSPACE=y CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y -CONFIG_EXYNOS_IOMMU=y CONFIG_EXTCON=y CONFIG_EXTCON_MAX14577=y CONFIG_EXTCON_MAX77693=y @@ -320,21 +319,9 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y -CONFIG_PRINTK_TIME=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_FS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_SOFTLOCKUP_DETECTOR=y -# CONFIG_DETECT_HUNG_TASK is not set -CONFIG_PROVE_LOCKING=y -CONFIG_DEBUG_ATOMIC_SLEEP=y -CONFIG_DEBUG_USER=y -CONFIG_CRYPTO_RSA=m -CONFIG_CRYPTO_DH=m CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_DH=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_XTS=m CONFIG_CRYPTO_MD5=m @@ -349,12 +336,18 @@ CONFIG_CRYPTO_USER_API_RNG=m CONFIG_CRYPTO_USER_API_AEAD=m CONFIG_CRYPTO_DEV_EXYNOS_RNG=y CONFIG_CRYPTO_DEV_S5P=y -CONFIG_ARM_CRYPTO=y -CONFIG_CRYPTO_SHA1_ARM_NEON=m -CONFIG_CRYPTO_SHA256_ARM=m -CONFIG_CRYPTO_SHA512_ARM=m -CONFIG_CRYPTO_AES_ARM_BS=m -CONFIG_CRYPTO_CHACHA20_NEON=m CONFIG_CRC_CCITT=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=96 CONFIG_FONTS=y CONFIG_FONT_7x14=y +CONFIG_PRINTK_TIME=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_DEBUG_INFO=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_SOFTLOCKUP_DETECTOR=y +# CONFIG_DETECT_HUNG_TASK is not set +CONFIG_PROVE_LOCKING=y +CONFIG_DEBUG_ATOMIC_SLEEP=y +CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index e3afca5bd9d6..4e28771beecd 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -160,7 +160,6 @@ CONFIG_BT_HCIVHCI=m CONFIG_BT_MRVL=m CONFIG_BT_MRVL_SDIO=m # CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_FW_LOADER=m CONFIG_CONNECTOR=m CONFIG_MTD=y @@ -247,7 +246,6 @@ CONFIG_FB=y CONFIG_FB_PXA=y CONFIG_FB_PXA_OVERLAY=y CONFIG_FB_PXA_PARAMETERS=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y diff --git a/arch/arm/configs/gemini_defconfig b/arch/arm/configs/gemini_defconfig index ef9aae89907d..f012e81a2fe4 100644 --- a/arch/arm/configs/gemini_defconfig +++ b/arch/arm/configs/gemini_defconfig @@ -22,7 +22,6 @@ CONFIG_PM=y CONFIG_NET=y CONFIG_UNIX=y CONFIG_INET=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig index 175881b7da7c..4d91e41cb628 100644 --- a/arch/arm/configs/h3600_defconfig +++ b/arch/arm/configs/h3600_defconfig @@ -25,7 +25,6 @@ CONFIG_IRLAN=m CONFIG_IRNET=m CONFIG_IRCOMM=m # CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/h5000_defconfig b/arch/arm/configs/h5000_defconfig index e90d1dfeb188..3946c6087327 100644 --- a/arch/arm/configs/h5000_defconfig +++ b/arch/arm/configs/h5000_defconfig @@ -32,7 +32,6 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig index 9b779e13e05d..770469f61c3e 100644 --- a/arch/arm/configs/imote2_defconfig +++ b/arch/arm/configs/imote2_defconfig @@ -138,7 +138,6 @@ CONFIG_BRIDGE=m # CONFIG_BRIDGE_IGMP_SNOOPING is not set CONFIG_IEEE802154=y # CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_FW_LOADER=m @@ -228,7 +227,6 @@ CONFIG_FB=y CONFIG_FB_PXA=y CONFIG_FB_PXA_OVERLAY=y CONFIG_FB_PXA_PARAMETERS=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_VGA_CONSOLE is not set diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index f2cf0722e8e1..2b2d617e279d 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -47,7 +47,6 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_NETFILTER=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_IMX_WEIM=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 8116648a8efd..a53b29251ed4 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -57,6 +57,7 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_CPUFREQ_DT=y CONFIG_ARM_IMX6Q_CPUFREQ=y +CONFIG_ARM_IMX_CPUFREQ_DT=y CONFIG_CPU_IDLE=y CONFIG_ARM_CPUIDLE=y CONFIG_VFP=y @@ -211,9 +212,11 @@ CONFIG_SPI_GPIO=y CONFIG_SPI_IMX=y CONFIG_SPI_FSL_DSPI=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_SIOX=m CONFIG_GPIO_MAX732X=y CONFIG_GPIO_MC9S08DZ60=y CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCF857X=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_74X164=y CONFIG_POWER_RESET=y @@ -223,6 +226,7 @@ CONFIG_POWER_SUPPLY=y CONFIG_SENSORS_MC13783_ADC=y CONFIG_SENSORS_GPIO_FAN=y CONFIG_SENSORS_IIO_HWMON=y +CONFIG_THERMAL_STATISTICS=y CONFIG_THERMAL_WRITABLE_TRIPS=y CONFIG_CPU_THERMAL=y CONFIG_IMX_THERMAL=y @@ -266,6 +270,7 @@ CONFIG_VIDEO_CODA=m CONFIG_VIDEO_IMX_PXP=y # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_ADV7180=m +CONFIG_VIDEO_OV2680=m CONFIG_VIDEO_OV5640=m CONFIG_IMX_IPUV3_CORE=y CONFIG_DRM=y @@ -399,11 +404,15 @@ CONFIG_MPL3115=y CONFIG_PWM=y CONFIG_PWM_FSL_FTM=y CONFIG_PWM_IMX27=y +CONFIG_PWM_IMX_TPM=y CONFIG_NVMEM_IMX_OCOTP=y CONFIG_NVMEM_VF610_OCOTP=y +CONFIG_NVMEM_SNVS_LPGPR=y CONFIG_TEE=y CONFIG_OPTEE=y CONFIG_MUX_MMIO=y +CONFIG_SIOX=m +CONFIG_SIOX_BUS_GPIO=m CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 747550c7af2f..2f0a762dc3a0 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -61,7 +61,6 @@ CONFIG_FB_MODE_HELPERS=y CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_VGA_CONSOLE is not set CONFIG_LOGO=y diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig index a73b6a31a4ab..30cdb287e1b4 100644 --- a/arch/arm/configs/iop13xx_defconfig +++ b/arch/arm/configs/iop13xx_defconfig @@ -34,7 +34,6 @@ CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_IPV6_SIT is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index f63362b665eb..18a21faa834c 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -30,7 +30,6 @@ CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_IPV6_SIT is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig index d22f832ccfd6..089eca43214a 100644 --- a/arch/arm/configs/iop33x_defconfig +++ b/arch/arm/configs/iop33x_defconfig @@ -28,7 +28,6 @@ CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_IPV6_SIT is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index 39ebcce3bc2f..27e7c0714b96 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -104,7 +104,6 @@ CONFIG_NET_CLS_RSVP6=m CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y CONFIG_NET_PKTGEN=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig index 65d37ad6e6b8..9f079be2b84b 100644 --- a/arch/arm/configs/jornada720_defconfig +++ b/arch/arm/configs/jornada720_defconfig @@ -24,7 +24,6 @@ CONFIG_IRDA=m CONFIG_IRLAN=m CONFIG_IRCOMM=m CONFIG_SA1100_FIR=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_SD=y @@ -47,7 +46,6 @@ CONFIG_LEGACY_PTY_COUNT=32 # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_S1D13XXX=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index 72fee57aad2f..3d5f5b501330 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -115,7 +115,6 @@ CONFIG_VLAN_8021Q=y CONFIG_CAN=m CONFIG_CAN_C_CAN=m CONFIG_CAN_C_CAN_PLATFORM=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig index b8b91d790e9b..df62d4dfbbb7 100644 --- a/arch/arm/configs/ks8695_defconfig +++ b/arch/arm/configs/ks8695_defconfig @@ -28,7 +28,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y # CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_CMDLINE_PARTS=y diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig index e3d5e15d66d1..e518168a0627 100644 --- a/arch/arm/configs/lpc18xx_defconfig +++ b/arch/arm/configs/lpc18xx_defconfig @@ -119,7 +119,6 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_DRM=y CONFIG_DRM_PL111=y CONFIG_FB_MODE_HELPERS=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 4b3b2c693c29..0cdc6c7974b3 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -40,7 +40,6 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set # CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set @@ -110,7 +109,6 @@ CONFIG_DRM=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PL111=y CONFIG_FB_MODE_HELPERS=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index de5be2fc7306..e6486c959220 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -53,7 +53,6 @@ CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_HIDP=m CONFIG_BT_HCIBTUSB=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -96,7 +95,6 @@ CONFIG_FB=y CONFIG_FB_PXA=y CONFIG_FB_PXA_OVERLAY=y CONFIG_FB_W100=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 7d26ca0b1302..301f29a1fcc3 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -4,6 +4,16 @@ CONFIG_POSIX_MQUEUE=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y # CONFIG_COMPAT_BRK is not set +CONFIG_ARCH_S3C24XX=y +CONFIG_S3C_ADC=y +CONFIG_S3C24XX_PWM=y +# CONFIG_CPU_S3C2410 is not set +CONFIG_CPU_S3C2440=y +CONFIG_MACH_MINI2440=y +CONFIG_AEABI=y +CONFIG_KEXEC=y +CONFIG_CPU_IDLE=y +CONFIG_APM_EMULATION=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y @@ -16,17 +26,7 @@ CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_LDM_PARTITION=y -CONFIG_ARCH_S3C24XX=y -# CONFIG_CPU_S3C2410 is not set -CONFIG_CPU_S3C2440=y -CONFIG_MACH_MINI2440=y -CONFIG_S3C_ADC=y -CONFIG_S3C24XX_PWM=y -CONFIG_AEABI=y -CONFIG_KEXEC=y -CONFIG_CPU_IDLE=y CONFIG_BINFMT_MISC=m -CONFIG_APM_EMULATION=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -46,9 +46,6 @@ CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_DIAG=m # CONFIG_IPV6 is not set CONFIG_NETFILTER=y @@ -76,7 +73,6 @@ CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_MAC80211_MESH=y CONFIG_MAC80211_LEDS=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_CONNECTOR=m CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y @@ -126,7 +122,6 @@ CONFIG_LIBERTAS=m CONFIG_LIBERTAS_SDIO=m CONFIG_ZD1211RW=m CONFIG_ZD1211RW_DEBUG=y -CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVBUG=m # CONFIG_KEYBOARD_ATKBD is not set @@ -160,7 +155,6 @@ CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y CONFIG_FB_S3C2410=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_CLASS_DEVICE=y @@ -174,12 +168,9 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_SOUND=y CONFIG_SND=y +CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_SEQUENCER=m CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_SEQUENCER_OSS=y -CONFIG_SND_DYNAMIC_MINORS=y # CONFIG_SND_DRIVERS is not set # CONFIG_SND_ARM is not set # CONFIG_SND_SPI is not set @@ -297,13 +288,6 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m -CONFIG_DEBUG_INFO=y -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_STRIP_ASM_SYMS=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -CONFIG_DEBUG_USER=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -342,3 +326,10 @@ CONFIG_LIBCRC32C=m CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_MINI_4x6=y +CONFIG_DEBUG_INFO=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig index 94deb0ed0541..a5e8d2235a1a 100644 --- a/arch/arm/configs/mmp2_defconfig +++ b/arch/arm/configs/mmp2_defconfig @@ -50,7 +50,6 @@ CONFIG_MFD_MAX8925=y CONFIG_REGULATOR=y CONFIG_REGULATOR_MAX8649=y CONFIG_REGULATOR_MAX8925=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_MAX8925=y diff --git a/arch/arm/configs/moxart_defconfig b/arch/arm/configs/moxart_defconfig index 6a11669fa536..9b98761e51c9 100644 --- a/arch/arm/configs/moxart_defconfig +++ b/arch/arm/configs/moxart_defconfig @@ -38,7 +38,6 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 63b5a8824f0f..201237002c65 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -72,7 +72,6 @@ CONFIG_NET_DSA=y CONFIG_NET_PKTGEN=m CONFIG_CFG80211=y CONFIG_MAC80211=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_IMX_WEIM=y @@ -96,8 +95,6 @@ CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_ATMEL_TCLIB=y CONFIG_ATMEL_SSC=m -CONFIG_ASPEED_LPC_CTRL=m -CONFIG_ASPEED_LPC_SNOOP=m CONFIG_EEPROM_AT24=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y @@ -178,10 +175,12 @@ CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SOC_CAMERA=y +CONFIG_VIDEO_ASPEED=m CONFIG_VIDEO_ATMEL_ISI=m CONFIG_DRM=y CONFIG_DRM_ATMEL_HLCDC=m CONFIG_DRM_PANEL_SIMPLE=y +CONFIG_DRM_ASPEED_GFX=m CONFIG_FB_IMX=y CONFIG_FB_ATMEL=y CONFIG_BACKLIGHT_ATMEL_LCDC=y @@ -226,6 +225,8 @@ CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_GADGET=y CONFIG_USB_AT91=m CONFIG_USB_ATMEL_USBA=m +CONFIG_USB_ASPEED_VHUB=m +CONFIG_USB_CONFIGFS=m CONFIG_MMC=y CONFIG_SDIO_UART=y CONFIG_MMC_ATMELMCI=y @@ -245,11 +246,15 @@ CONFIG_RTC_DRV_RV3029C2=m CONFIG_RTC_DRV_AT91RM9200=m CONFIG_RTC_DRV_AT91SAM9=m CONFIG_RTC_DRV_MV=y +CONFIG_RTC_DRV_ASPEED=m CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y CONFIG_MV_XOR=y CONFIG_STAGING=y CONFIG_FB_XGI=y +CONFIG_ASPEED_LPC_CTRL=m +CONFIG_ASPEED_LPC_SNOOP=m +CONFIG_ASPEED_P2A_CTRL=m CONFIG_IIO=m CONFIG_ASPEED_ADC=m CONFIG_AT91_ADC=m diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 6b748f214eae..6a40bc2ef271 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -413,6 +413,7 @@ CONFIG_SPI_SPIDEV=y CONFIG_SPMI=y CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_RZA2=y +CONFIG_PINCTRL_STMFX=y CONFIG_PINCTRL_PALMAS=y CONFIG_PINCTRL_APQ8064=y CONFIG_PINCTRL_APQ8084=y @@ -656,6 +657,8 @@ CONFIG_DRM_VC4=m CONFIG_DRM_ETNAVIV=m CONFIG_DRM_MXSFB=m CONFIG_DRM_PL111=m +CONFIG_DRM_LIMA=m +CONFIG_DRM_PANFROST=m CONFIG_FB_EFI=y CONFIG_FB_WM8505=y CONFIG_FB_SH_MOBILE_LCDC=y @@ -940,7 +943,6 @@ CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y CONFIG_ARCH_TEGRA_114_SOC=y CONFIG_ARCH_TEGRA_124_SOC=y -CONFIG_PM_DEVFREQ=y CONFIG_ARM_TEGRA_DEVFREQ=m CONFIG_TI_AEMIF=y CONFIG_IIO=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index e9567513f068..b39b1300a459 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -36,7 +36,6 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_NET_PKTGEN=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig index 0e5577a31851..226f2e97c6e2 100644 --- a/arch/arm/configs/mvebu_v5_defconfig +++ b/arch/arm/configs/mvebu_v5_defconfig @@ -62,7 +62,6 @@ CONFIG_NET_SWITCHDEV=y CONFIG_NET_PKTGEN=m CONFIG_CFG80211=y CONFIG_MAC80211=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index 3ac2e84fdeaa..cddce57fe4b9 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -40,7 +40,6 @@ CONFIG_BT=y CONFIG_BT_MRVL=y CONFIG_BT_MRVL_SDIO=y CONFIG_CFG80211=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index ed570a0d1f2a..2773899c21b3 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -96,7 +96,6 @@ CONFIG_DRM=y CONFIG_DRM_PANEL_SEIKO_43WVF1G=y CONFIG_DRM_MXSFB=y CONFIG_FB_MODE_HELPERS=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig deleted file mode 100644 index cc5c5f9ef720..000000000000 --- a/arch/arm/configs/netx_defconfig +++ /dev/null @@ -1,80 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_ARCH_NETX=y -CONFIG_MACH_NXDKN=y -CONFIG_MACH_NXDB500=y -CONFIG_MACH_NXEB500HMI=y -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttySMX0,115200" -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_NET_IPGRE=m -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=y -CONFIG_INET_ESP=y -CONFIG_INET_IPCOMP=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_NETFILTER=y -CONFIG_NET_PKTGEN=m -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PLATRAM=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_NETX=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIAL_NETX=y -CONFIG_SERIAL_NETX_CONSOLE=y -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FB_ARMCLCD=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_RTC_CLASS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRC_CCITT=m -CONFIG_LIBCRC32C=m diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index cfc094189d09..3f35761dc9ff 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -45,7 +45,6 @@ CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y CONFIG_BT_HCIVHCI=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_TESTS=m CONFIG_MTD_CMDLINE_PARTS=y @@ -98,7 +97,6 @@ CONFIG_REGULATOR=y CONFIG_DRM=y CONFIG_DRM_PANEL_TPO_TPG110=y CONFIG_DRM_PL111=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y diff --git a/arch/arm/configs/nuc910_defconfig b/arch/arm/configs/nuc910_defconfig index c0d152c02fba..63dba62c3326 100644 --- a/arch/arm/configs/nuc910_defconfig +++ b/arch/arm/configs/nuc910_defconfig @@ -13,7 +13,6 @@ CONFIG_AEABI=y CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M" CONFIG_KEXEC=y CONFIG_FPE_NWFPE=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig index 8dde1186c2ef..cb5a8788ebe8 100644 --- a/arch/arm/configs/nuc950_defconfig +++ b/arch/arm/configs/nuc950_defconfig @@ -19,7 +19,6 @@ CONFIG_KEXEC=y CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y diff --git a/arch/arm/configs/nuc960_defconfig b/arch/arm/configs/nuc960_defconfig index 6bb784f8eb5b..f7af84e23a05 100644 --- a/arch/arm/configs/nuc960_defconfig +++ b/arch/arm/configs/nuc960_defconfig @@ -19,7 +19,6 @@ CONFIG_KEXEC=y CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 82af77c093f1..0c43c589f191 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -79,7 +79,6 @@ CONFIG_BT_RFCOMM=y CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=y CONFIG_BT_HIDP=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_CONNECTOR=y @@ -154,7 +153,6 @@ CONFIG_FB_OMAP_LCDC_EXTERNAL=y CONFIG_FB_OMAP_LCDC_HWA742=y CONFIG_FB_OMAP_MANUAL_UPDATE=y CONFIG_FB_OMAP_LCD_MIPID=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 077e0fde1ff9..4bdbb036ac26 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -59,7 +59,6 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_NET_DSA=y CONFIG_NET_PKTGEN=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig index e0a614272561..4a3fd82c2a0c 100644 --- a/arch/arm/configs/palmz72_defconfig +++ b/arch/arm/configs/palmz72_defconfig @@ -30,7 +30,6 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_LOOP=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y @@ -49,7 +48,6 @@ CONFIG_PDA_POWER=y # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_PXA=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig index 9c88a193490c..a8c53228b0c1 100644 --- a/arch/arm/configs/pcm027_defconfig +++ b/arch/arm/configs/pcm027_defconfig @@ -35,7 +35,6 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig index 7cc8e8e4d296..be19aa127595 100644 --- a/arch/arm/configs/prima2_defconfig +++ b/arch/arm/configs/prima2_defconfig @@ -16,7 +16,6 @@ CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_KEXEC=y CONFIG_BINFMT_MISC=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig index e7c7b91b6de2..0947f022954d 100644 --- a/arch/arm/configs/pxa168_defconfig +++ b/arch/arm/configs/pxa168_defconfig @@ -24,7 +24,6 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y # CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_BLK_DEV is not set diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig index 7681eea60127..06bbc7a59b60 100644 --- a/arch/arm/configs/pxa3xx_defconfig +++ b/arch/arm/configs/pxa3xx_defconfig @@ -26,7 +26,6 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_MTD=y @@ -72,7 +71,6 @@ CONFIG_REGULATOR_DEBUG=y CONFIG_REGULATOR_DA903X=y CONFIG_FB=y CONFIG_FB_PXA=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_TDO24M=y CONFIG_BACKLIGHT_CLASS_DEVICE=y diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig index 3aff71e6dae5..b21196372158 100644 --- a/arch/arm/configs/pxa910_defconfig +++ b/arch/arm/configs/pxa910_defconfig @@ -24,7 +24,6 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y # CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_BLK_DEV is not set diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index 07ebbdce3645..787c3f9be414 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -156,7 +156,6 @@ CONFIG_MAC80211=m CONFIG_RFKILL=y CONFIG_RFKILL_INPUT=y CONFIG_RFKILL_GPIO=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_CONNECTOR=y @@ -462,7 +461,6 @@ CONFIG_PXA3XX_GCU=m CONFIG_FB_MBX=m CONFIG_FB_VIRTUAL=m CONFIG_FB_SIMPLE=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CORGI=m CONFIG_LCD_PLATFORM=m CONFIG_LCD_TOSA=m diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index c1854751c99a..34433bf5885d 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -37,6 +37,7 @@ CONFIG_ARM_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -146,12 +147,13 @@ CONFIG_REGULATOR_QCOM_SMD_RPM=y CONFIG_REGULATOR_QCOM_SPMI=y CONFIG_MEDIA_SUPPORT=y CONFIG_DRM=y +CONFIG_DRM_PANEL_SIMPLE=y CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_LM3630A=y CONFIG_BACKLIGHT_LP855X=y CONFIG_SOUND=y CONFIG_SND=y @@ -183,6 +185,7 @@ CONFIG_USB_CONFIGFS_NCM=y CONFIG_USB_CONFIGFS_ECM=y CONFIG_USB_CONFIGFS_F_FS=y CONFIG_USB_ULPI_BUS=y +CONFIG_USB_ETH=m CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y @@ -262,6 +265,8 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=256 CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y CONFIG_DEBUG_INFO=y diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index cc9fa24d4b8f..8a056cc0c1ec 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -34,7 +34,6 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_AFS_PARTS=y @@ -65,7 +64,6 @@ CONFIG_DRM=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PL111=y CONFIG_FB_MODE_HELPERS=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 39c648594d93..95b5a4ffddea 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -4,13 +4,8 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_BLK_DEV_INITRD=y CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_SOLARIS_X86_PARTITION=y CONFIG_ARCH_S3C24XX=y +CONFIG_S3C_ADC=y CONFIG_CPU_S3C2412=y CONFIG_CPU_S3C2416=y CONFIG_CPU_S3C2440=y @@ -40,13 +35,18 @@ CONFIG_ARCH_S3C2440=y CONFIG_MACH_NEO1973_GTA02=y CONFIG_MACH_RX1950=y CONFIG_MACH_SMDK2443=y -CONFIG_S3C_ADC=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y CONFIG_APM_EMULATION=m +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y +CONFIG_SOLARIS_X86_PARTITION=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -74,7 +74,6 @@ CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y CONFIG_NF_CONNTRACK=m @@ -129,7 +128,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m CONFIG_IP_VS=m -CONFIG_NF_CONNTRACK_IPV4=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m @@ -148,7 +146,6 @@ CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -181,11 +178,10 @@ CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_MAC80211_MESH=y CONFIG_MAC80211_LEDS=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y @@ -291,11 +287,8 @@ CONFIG_BACKLIGHT_PWM=m CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_SOUND=y CONFIG_SND=y -CONFIG_SND_SEQUENCER=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_SEQUENCER=m # CONFIG_SND_DRIVERS is not set # CONFIG_SND_ARM is not set # CONFIG_SND_SPI is not set diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index 6e2656567da6..59a258d504aa 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -2,9 +2,6 @@ CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MULTI_V6=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_S3C64XX=y @@ -18,10 +15,11 @@ CONFIG_MACH_HMT=y CONFIG_MACH_SMARTQ5=y CONFIG_MACH_SMARTQ7=y CONFIG_MACH_WLF_CRAGG_6410=y -CONFIG_AEABI=y CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144" CONFIG_VFP=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_S3C2410=y @@ -40,15 +38,12 @@ CONFIG_SPI_GPIO=m CONFIG_SPI_S3C64XX=m CONFIG_FB=y CONFIG_FB_S3C=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_LTV350QV=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y CONFIG_SOUND=y CONFIG_SND=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m CONFIG_SND_SOC=m CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y @@ -61,8 +56,8 @@ CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_PL2303=m CONFIG_MMC=y -CONFIG_MMC_DEBUG=y CONFIG_SDIO_UART=y +CONFIG_MMC_DEBUG=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_S3C=y CONFIG_RTC_CLASS=y diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig index fd4f28aabda6..70919716f815 100644 --- a/arch/arm/configs/s5pv210_defconfig +++ b/arch/arm/configs/s5pv210_defconfig @@ -40,7 +40,6 @@ CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_BCM=y CONFIG_CFG80211=m CONFIG_MAC80211=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_BLK_DEV_LOOP=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index d5341b0bd88d..ef785340e6f8 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -56,7 +56,6 @@ CONFIG_CAN_M_CAN=y CONFIG_CFG80211=y CONFIG_MAC80211=y CONFIG_MAC80211_LEDS=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set @@ -154,7 +153,6 @@ CONFIG_SOC_CAMERA_OV2640=m CONFIG_DRM=y CONFIG_DRM_ATMEL_HLCDC=y CONFIG_DRM_PANEL_SIMPLE=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index eb02ba9ec6e6..c6c70355141c 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -197,7 +197,6 @@ CONFIG_PWM=y CONFIG_PWM_RCAR=y CONFIG_PWM_RENESAS_TPU=y CONFIG_RESET_CONTROLLER=y -CONFIG_GENERIC_PHY=y CONFIG_PHY_RCAR_GEN2=y CONFIG_PHY_RCAR_GEN3_USB2=y # CONFIG_DNOTIFY is not set diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index 6701a975e785..fe2e1e82e233 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/socfpga_defconfig @@ -44,7 +44,6 @@ CONFIG_PCI=y CONFIG_PCI_MSI=y CONFIG_PCIE_ALTERA=y CONFIG_PCIE_ALTERA_MSI=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig index 8ee3679ca8b2..3b206a31902f 100644 --- a/arch/arm/configs/spear13xx_defconfig +++ b/arch/arm/configs/spear13xx_defconfig @@ -28,7 +28,6 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_NET_IPIP=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_OF_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig index ddd73b25f75e..fc5f71c765ed 100644 --- a/arch/arm/configs/spear3xx_defconfig +++ b/arch/arm/configs/spear3xx_defconfig @@ -13,7 +13,6 @@ CONFIG_MACH_SPEAR310=y CONFIG_MACH_SPEAR320=y CONFIG_BINFMT_MISC=y CONFIG_NET=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_OF_PARTS=y CONFIG_MTD_BLOCK=y @@ -54,7 +53,6 @@ CONFIG_WATCHDOG=y CONFIG_ARM_SP805_WATCHDOG=y CONFIG_DRM=y CONFIG_DRM_PL111=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig index 5b410f0a365b..52a56b8ce6a7 100644 --- a/arch/arm/configs/spear6xx_defconfig +++ b/arch/arm/configs/spear6xx_defconfig @@ -10,7 +10,6 @@ CONFIG_PLAT_SPEAR=y CONFIG_ARCH_SPEAR6XX=y CONFIG_BINFMT_MISC=y CONFIG_NET=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_OF_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index f6d2f674517c..4fb51d665abb 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -78,7 +78,6 @@ CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -126,7 +125,6 @@ CONFIG_SPI=y CONFIG_SPI_PXA2XX=y CONFIG_FB=y CONFIG_FB_PXA=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_CORGI=y CONFIG_BACKLIGHT_CLASS_DEVICE=y diff --git a/arch/arm/configs/tango4_defconfig b/arch/arm/configs/tango4_defconfig index 68eb16e583ac..cbc9ade78f14 100644 --- a/arch/arm/configs/tango4_defconfig +++ b/arch/arm/configs/tango4_defconfig @@ -33,7 +33,6 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index d0a9e5dd9135..3a9503fe84cb 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -22,7 +22,6 @@ CONFIG_FPE_NWFPE=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_MTD=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index ecad22501b48..d66f0c287d41 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -136,7 +136,6 @@ CONFIG_SA1100_WATCHDOG=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_PXA=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_VGA_CONSOLE is not set diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index bedf397c75de..8223397db047 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -22,7 +22,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072" CONFIG_CPU_IDLE=y # CONFIG_SUSPEND is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y @@ -43,7 +42,6 @@ CONFIG_WATCHDOG=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_USB_SUPPORT is not set diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index e2151a7aaf49..e6b98b6eb88d 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -38,7 +38,6 @@ CONFIG_CFG80211_DEBUGFS=y CONFIG_MAC80211=y CONFIG_MAC80211_LEDS=y CONFIG_CAIF=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index 5282324c7cef..fe4d4b596585 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -62,7 +62,6 @@ CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_DUMB_VGA_DAC=y CONFIG_DRM_PL111=y CONFIG_FB_MODE_HELPERS=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_LOGO=y CONFIG_SOUND=y diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig index 484d77a7f589..25753552277a 100644 --- a/arch/arm/configs/vexpress_defconfig +++ b/arch/arm/configs/vexpress_defconfig @@ -45,7 +45,6 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_WIRELESS is not set CONFIG_NET_9P=y CONFIG_NET_9P_VIRTIO=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DMA_CMA=y CONFIG_MTD=y @@ -86,7 +85,6 @@ CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_SII902X=y CONFIG_DRM_PL111=y CONFIG_FB_MODE_HELPERS=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 070e5074f1ee..2ff16168d9c2 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -41,7 +41,6 @@ CONFIG_BT_BNEP=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_FW_LOADER=m CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y @@ -110,7 +109,6 @@ CONFIG_WATCHDOG=y CONFIG_FB=y CONFIG_FB_PXA=m CONFIG_FB_PXA_PARAMETERS=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_PWM=m # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig index 2eda24635e65..f1fbdfc5c8c6 100644 --- a/arch/arm/configs/xcep_defconfig +++ b/arch/arm/configs/xcep_defconfig @@ -43,7 +43,6 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set CONFIG_MTD_COMPLEX_MAPPINGS=y diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 09e7050d5653..aa3023c9a011 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -39,7 +39,6 @@ CONFIG_BT_HCIUART_BCSP=y CONFIG_CFG80211=m CONFIG_LIB80211=m CONFIG_MAC80211=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_READONLY=y @@ -110,7 +109,6 @@ CONFIG_WATCHDOG=y CONFIG_FB=y CONFIG_FB_PXA=m CONFIG_FB_PXA_PARAMETERS=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y diff --git a/arch/arm/configs/zx_defconfig b/arch/arm/configs/zx_defconfig index dfc061d87d2f..c4070c19ea6c 100644 --- a/arch/arm/configs/zx_defconfig +++ b/arch/arm/configs/zx_defconfig @@ -41,7 +41,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="console=ttyAMA0,115200 debug earlyprintk root=/dev/ram rw rootwait" #CONFIG_NET is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h index 64714c869f9f..3cb6f22f510b 100644 --- a/arch/arm/include/asm/hardware/iop3xx.h +++ b/arch/arm/include/asm/hardware/iop3xx.h @@ -302,6 +302,8 @@ extern struct platform_device iop3xx_dma_1_channel; extern struct platform_device iop3xx_aau_channel; extern struct platform_device iop3xx_i2c0_device; extern struct platform_device iop3xx_i2c1_device; +extern struct gpiod_lookup_table iop3xx_i2c0_gpio_lookup; +extern struct gpiod_lookup_table iop3xx_i2c1_gpio_lookup; #endif diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index f11c35cf0b74..7a0596fcb2e7 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -30,7 +30,6 @@ * ISA I/O bus memory addresses are 1:1 with the physical address. */ #define isa_virt_to_bus virt_to_phys -#define isa_page_to_bus page_to_phys #define isa_bus_to_virt phys_to_virt /* diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 77e5582c2259..67d20712cb48 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -5,7 +5,7 @@ * Copyright (C) 1997-1999 Russell King * * Structure passed to kernel to tell it about the - * hardware it's running on. See Documentation/arm/Setup + * hardware it's running on. See Documentation/arm/setup.rst * for more info. */ #ifndef __ASMARM_SETUP_H diff --git a/arch/arm/include/debug/netx.S b/arch/arm/include/debug/netx.S deleted file mode 100644 index 08afc58885d3..000000000000 --- a/arch/arm/include/debug/netx.S +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks -*/ - -#define UART_DATA 0 -#define UART_FLAG 0x18 -#define UART_FLAG_BUSY (1 << 3) - - .macro addruart, rp, rv, tmp - ldr \rp, =CONFIG_DEBUG_UART_PHYS - ldr \rv, =CONFIG_DEBUG_UART_VIRT - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #UART_DATA] - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #UART_FLAG] - tst \rd, #UART_FLAG_BUSY - bne 1002b - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #UART_FLAG] - tst \rd, #UART_FLAG_BUSY - bne 1001b - .endm diff --git a/arch/arm/include/uapi/asm/setup.h b/arch/arm/include/uapi/asm/setup.h index 6b335a9ff8c8..25ceda63b284 100644 --- a/arch/arm/include/uapi/asm/setup.h +++ b/arch/arm/include/uapi/asm/setup.h @@ -9,7 +9,7 @@ * published by the Free Software Foundation. * * Structure passed to kernel to tell it about the - * hardware it's running on. See Documentation/arm/Setup + * hardware it's running on. See Documentation/arm/setup.rst * for more info. */ #ifndef _UAPI__ASMARM_SETUP_H diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 0b8cfdd60b90..858d4e541532 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -826,7 +826,7 @@ ENDPROC(__switch_to) * existing ones. This mechanism should be used only for things that are * really small and justified, and not be abused freely. * - * See Documentation/arm/kernel_user_helpers.txt for formal definitions. + * See Documentation/arm/kernel_user_helpers.rst for formal definitions. */ THUMB( .arm ) diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index b3d439c41c7b..deef17f34bd2 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -55,6 +55,13 @@ void *module_alloc(unsigned long size) } #endif +bool module_exit_section(const char *name) +{ + return strstarts(name, ".exit") || + strstarts(name, ".ARM.extab.exit") || + strstarts(name, ".ARM.exidx.exit"); +} + int apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, unsigned int relindex, struct module *module) diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 0bff0176db2c..b25c54585048 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -31,7 +31,6 @@ else endif ifeq ($(CONFIG_ARCH_RPC),y) - lib-y += ecard.o io-acorn.o floppydma.o AFLAGS_delay-loop.o += -march=armv4 endif diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index da85e64143e9..d5af6aedc02c 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -15,6 +15,7 @@ #include <linux/suspend.h> #include <linux/clk/at91_pmc.h> +#include <linux/platform_data/atmel.h> #include <asm/cacheflush.h> #include <asm/fncpy.h> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 4ef1e55f4a0b..5e5f1fabc3d4 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -208,6 +208,7 @@ config ARCH_BCM_63XX config ARCH_BRCMSTB bool "Broadcom BCM7XXX based boards" depends on ARCH_MULTI_V7 + select ARCH_HAS_RESET_CONTROLLER select ARM_GIC select ARM_ERRATA_798181 if SMP select HAVE_ARM_ARCH_TIMER @@ -217,6 +218,7 @@ config ARCH_BRCMSTB select ZONE_DMA if ARM_LPAE select SOC_BRCMSTB select SOC_BUS + select PINCTRL help Say Y if you intend to run the kernel on a Broadcom ARM-based STB chipset. diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 8fd23b263c60..b59c813b1af4 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -40,9 +40,6 @@ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o # Support for secure monitor traps obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o -ifeq ($(call as-instr,.arch_extension sec,as_has_sec),as_has_sec) -CFLAGS_bcm_kona_smc.o += -Wa,-march=armv7-a+sec -DREQUIRES_SEC -endif # BCM2835 obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o diff --git a/arch/arm/mach-bcm/bcm63xx_smp.c b/arch/arm/mach-bcm/bcm63xx_smp.c index 83dd0c10fa47..641e1f8fcf5e 100644 --- a/arch/arm/mach-bcm/bcm63xx_smp.c +++ b/arch/arm/mach-bcm/bcm63xx_smp.c @@ -141,6 +141,7 @@ static int bcm63138_smp_boot_secondary(unsigned int cpu, * return */ ret = bcm63xx_pmb_power_on_cpu(dn); + of_node_put(dn); if (ret) goto out; out: diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c index a55a7ecf146a..541e850a736c 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.c +++ b/arch/arm/mach-bcm/bcm_kona_smc.c @@ -125,9 +125,7 @@ static int bcm_kona_do_smc(u32 service_id, u32 buffer_phys) __asmeq("%2", "r4") __asmeq("%3", "r5") __asmeq("%4", "r6") -#ifdef REQUIRES_SEC ".arch_extension sec\n" -#endif " smc #0\n" : "=r" (ip), "=r" (r0) : "r" (r4), "r" (r5), "r" (r6) diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c index b81bb386951d..1238ac801530 100644 --- a/arch/arm/mach-bcm/board_bcm281xx.c +++ b/arch/arm/mach-bcm/board_bcm281xx.c @@ -38,6 +38,7 @@ static void bcm281xx_restart(enum reboot_mode mode, const char *cmd) return; } base = of_iomap(np_wdog, 0); + of_node_put(np_wdog); if (!base) { pr_emerg("Couldn't map brcm,kona-wdt\n"); return; diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c index 12379960e982..4555f21e7077 100644 --- a/arch/arm/mach-bcm/platsmp-brcmstb.c +++ b/arch/arm/mach-bcm/platsmp-brcmstb.c @@ -334,11 +334,14 @@ static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus) rc = setup_hifcpubiuctrl_regs(np); if (rc) - return; + goto out_put_node; rc = setup_hifcont_regs(np); if (rc) - return; + goto out_put_node; + +out_put_node: + of_node_put(np); } static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle) diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 31ae3be5741d..0628e7d7dcf3 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -631,13 +631,12 @@ static void da850_evm_bb_keys_init(unsigned gpio) } } -#define DA850_N_BB_USER_LED 2 - static struct gpio_led da850_evm_bb_leds[] = { - [0 ... DA850_N_BB_USER_LED - 1] = { - .active_low = 1, - .gpio = -1, /* assigned at runtime */ - .name = NULL, /* assigned at runtime */ + { + .name = "user_led2", + }, + { + .name = "user_led1", }, }; @@ -646,6 +645,20 @@ static struct gpio_led_platform_data da850_evm_bb_leds_pdata = { .num_leds = ARRAY_SIZE(da850_evm_bb_leds), }; +static struct gpiod_lookup_table da850_evm_bb_leds_gpio_table = { + .dev_id = "leds-gpio", + .table = { + GPIO_LOOKUP_IDX("i2c-bb-expander", + DA850_EVM_BB_EXP_USER_LED2, NULL, + 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("i2c-bb-expander", + DA850_EVM_BB_EXP_USER_LED2 + 1, NULL, + 1, GPIO_ACTIVE_LOW), + + { }, + }, +}; + static struct platform_device da850_evm_bb_leds_device = { .name = "leds-gpio", .id = -1, @@ -654,20 +667,6 @@ static struct platform_device da850_evm_bb_leds_device = { } }; -static void da850_evm_bb_leds_init(unsigned gpio) -{ - int i; - struct gpio_led *led; - - for (i = 0; i < DA850_N_BB_USER_LED; i++) { - led = &da850_evm_bb_leds[i]; - - led->gpio = gpio + DA850_EVM_BB_EXP_USER_LED2 + i; - led->name = - da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_LED2 + i]; - } -} - static int da850_evm_bb_expander_setup(struct i2c_client *client, unsigned gpio, unsigned ngpio, void *c) @@ -685,7 +684,7 @@ static int da850_evm_bb_expander_setup(struct i2c_client *client, goto io_exp_setup_sw_fail; } - da850_evm_bb_leds_init(gpio); + gpiod_add_lookup_table(&da850_evm_bb_leds_gpio_table); ret = platform_device_register(&da850_evm_bb_leds_device); if (ret) { pr_warn("Could not register baseboard GPIO expander LEDs"); @@ -729,10 +728,12 @@ static struct i2c_board_info __initdata da850_evm_i2c_devices[] = { }, { I2C_BOARD_INFO("tca6416", 0x20), + .dev_name = "ui-expander", .platform_data = &da850_evm_ui_expander_info, }, { I2C_BOARD_INFO("tca6416", 0x21), + .dev_name = "bb-expander", .platform_data = &da850_evm_bb_expander_info, }, }; diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 1c518b8ee520..d7422233a130 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -49,6 +49,7 @@ config S5P_DEV_MFC config ARCH_EXYNOS3 bool "SAMSUNG EXYNOS3" + default y select ARM_CPU_SUSPEND if PM help Samsung EXYNOS3 (Cortex-A7) SoC based systems @@ -106,7 +107,7 @@ config SOC_EXYNOS5420 bool "SAMSUNG EXYNOS5420" default y depends on ARCH_EXYNOS5 - select MCPM if SMP + select EXYNOS_MCPM if SMP select ARM_CCI400_PORT_CTRL select ARM_CPU_SUSPEND @@ -115,6 +116,10 @@ config SOC_EXYNOS5800 default y depends on SOC_EXYNOS5420 +config EXYNOS_MCPM + bool + select MCPM + config EXYNOS_CPU_SUSPEND bool select ARM_CPU_SUSPEND diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 264dbaa89c3d..0fd3fcf8bfb0 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -14,9 +14,5 @@ obj-$(CONFIG_PM_SLEEP) += suspend.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o -plus_sec := $(call as-instr,.arch_extension sec,+sec) -AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec) -AFLAGS_sleep.o :=-Wa,-march=armv7-a$(plus_sec) - -obj-$(CONFIG_MCPM) += mcpm-exynos.o +obj-$(CONFIG_EXYNOS_MCPM) += mcpm-exynos.o CFLAGS_mcpm-exynos.o += -march=armv7-a diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index c93356a8d662..56411bb63d45 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -106,7 +106,7 @@ void exynos_firmware_init(void); #define C2_STATE (1 << 3) /* * Magic values for bootloader indicating chosen low power mode. - * See also Documentation/arm/Samsung/Bootloader-interface.txt + * See also Documentation/arm/samsung/bootloader-interface.rst */ #define EXYNOS_SLEEP_MAGIC 0x00000bad #define EXYNOS_AFTR_MAGIC 0xfcba0d10 diff --git a/arch/arm/mach-exynos/exynos-smc.S b/arch/arm/mach-exynos/exynos-smc.S index d259532ba937..6da31e6a7acb 100644 --- a/arch/arm/mach-exynos/exynos-smc.S +++ b/arch/arm/mach-exynos/exynos-smc.S @@ -10,7 +10,8 @@ /* * Function signature: void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3) */ - + .arch armv7-a + .arch_extension sec ENTRY(exynos_smc) stmfd sp!, {r4-r11, lr} dsb diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S index 2783c3a0c06a..ed93f91853b8 100644 --- a/arch/arm/mach-exynos/sleep.S +++ b/arch/arm/mach-exynos/sleep.S @@ -44,7 +44,8 @@ ENTRY(exynos_cpu_resume) ENDPROC(exynos_cpu_resume) .align - + .arch armv7-a + .arch_extension sec ENTRY(exynos_cpu_resume_ns) mrc p15, 0, r0, c0, c0, 0 ldr r1, =CPU_MASK diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index be122af0de8f..6a0d3448ea00 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -268,7 +268,7 @@ static int exynos5420_cpu_suspend(unsigned long arg) unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - if (IS_ENABLED(CONFIG_MCPM)) { + if (IS_ENABLED(CONFIG_EXYNOS_MCPM)) { mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume); mcpm_cpu_suspend(); } @@ -285,7 +285,7 @@ static void exynos_pm_set_wakeup_mask(void) * Set wake-up mask registers * EXYNOS_EINT_WAKEUP_MASK is set by pinctrl driver in late suspend. */ - pmu_raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK); + pmu_raw_writel(exynos_irqwake_intmask & ~BIT(31), S5P_WAKEUP_MASK); } static void exynos_pm_enter_sleep_mode(void) @@ -351,7 +351,7 @@ static void exynos5420_pm_prepare(void) exynos_pm_enter_sleep_mode(); /* ensure at least INFORM0 has the resume address */ - if (IS_ENABLED(CONFIG_MCPM)) + if (IS_ENABLED(CONFIG_EXYNOS_MCPM)) pmu_raw_writel(__pa_symbol(mcpm_entry_point), S5P_INFORM0); tmp = pmu_raw_readl(EXYNOS_L2_OPTION(0)); @@ -455,7 +455,7 @@ static void exynos5420_prepare_pm_resume(void) mpidr = read_cpuid_mpidr(); cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - if (IS_ENABLED(CONFIG_MCPM)) + if (IS_ENABLED(CONFIG_EXYNOS_MCPM)) WARN_ON(mcpm_cpu_powered_up()); if (IS_ENABLED(CONFIG_HW_PERF_EVENTS) && cluster != 0) { diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile index 7e6732c16862..71cc68041d92 100644 --- a/arch/arm/mach-highbank/Makefile +++ b/arch/arm/mach-highbank/Makefile @@ -1,7 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only obj-y := highbank.o system.o smc.o -plus_sec := $(call as-instr,.arch_extension sec,+sec) -AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec) - obj-$(CONFIG_PM_SLEEP) += pm.o diff --git a/arch/arm/mach-highbank/smc.S b/arch/arm/mach-highbank/smc.S index b16c0442e812..78b3f19e7f37 100644 --- a/arch/arm/mach-highbank/smc.S +++ b/arch/arm/mach-highbank/smc.S @@ -13,7 +13,8 @@ * the monitor API number. * Function signature : void highbank_smc1(u32 fn, u32 arg) */ - + .arch armv7-a + .arch_extension sec ENTRY(highbank_smc1) stmfd sp!, {r4-r11, lr} mov r12, r0 diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index a2441ed6b673..39a7d9393641 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -14,22 +14,22 @@ #include "hardware.h" static int num_idle_cpus = 0; -static DEFINE_SPINLOCK(cpuidle_lock); +static DEFINE_RAW_SPINLOCK(cpuidle_lock); static int imx6q_enter_wait(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - spin_lock(&cpuidle_lock); + raw_spin_lock(&cpuidle_lock); if (++num_idle_cpus == num_online_cpus()) imx6_set_lpm(WAIT_UNCLOCKED); - spin_unlock(&cpuidle_lock); + raw_spin_unlock(&cpuidle_lock); cpu_do_idle(); - spin_lock(&cpuidle_lock); + raw_spin_lock(&cpuidle_lock); if (num_idle_cpus-- == num_online_cpus()) imx6_set_lpm(WAIT_CLOCKED); - spin_unlock(&cpuidle_lock); + raw_spin_unlock(&cpuidle_lock); return index; } diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c index dec5d90a66ce..95713450591a 100644 --- a/arch/arm/mach-imx/mach-imx7d.c +++ b/arch/arm/mach-imx/mach-imx7d.c @@ -94,6 +94,12 @@ static void __init imx7d_init_machine(void) imx7d_enet_init(); } +static void __init imx7d_init_late(void) +{ + if (IS_ENABLED(CONFIG_ARM_IMX_CPUFREQ_DT)) + platform_device_register_simple("imx-cpufreq-dt", -1, NULL, 0); +} + static void __init imx7d_init_irq(void) { imx_init_revision_from_anatop(); @@ -110,5 +116,6 @@ static const char *const imx7d_dt_compat[] __initconst = { DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)") .init_irq = imx7d_init_irq, .init_machine = imx7d_init_machine, + .init_late = imx7d_init_late, .dt_compat = imx7d_dt_compat, MACHINE_END diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c index 493de4fd8b2e..61a1e593f9ec 100644 --- a/arch/arm/mach-iop32x/em7210.c +++ b/arch/arm/mach-iop32x/em7210.c @@ -20,6 +20,7 @@ #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <mach/hardware.h> #include <linux/io.h> #include <linux/irq.h> @@ -207,6 +208,8 @@ static void __init em7210_init_machine(void) { register_iop32x_gpio(); platform_device_register(&em7210_serial_device); + gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup); + gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup); platform_device_register(&iop3xx_i2c0_device); platform_device_register(&iop3xx_i2c1_device); platform_device_register(&em7210_flash_device); diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index 84cdb4587b34..5a45d616d9ac 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -21,6 +21,7 @@ #include <linux/i2c.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/gpio/machine.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -185,6 +186,8 @@ static void glantank_power_off(void) static void __init glantank_init_machine(void) { register_iop32x_gpio(); + gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup); + gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup); platform_device_register(&iop3xx_i2c0_device); platform_device_register(&iop3xx_i2c1_device); platform_device_register(&glantank_flash_device); diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c index b177e3900616..8755aa87e591 100644 --- a/arch/arm/mach-iop32x/iq31244.c +++ b/arch/arm/mach-iop32x/iq31244.c @@ -22,6 +22,7 @@ #include <linux/mtd/physmap.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/gpio/machine.h> #include <mach/hardware.h> #include <asm/cputype.h> #include <asm/irq.h> @@ -281,6 +282,8 @@ void ep80219_power_off(void) static void __init iq31244_init_machine(void) { register_iop32x_gpio(); + gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup); + gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup); platform_device_register(&iop3xx_i2c0_device); platform_device_register(&iop3xx_i2c1_device); platform_device_register(&iq31244_flash_device); diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c index 815b9f070007..e12699d1c540 100644 --- a/arch/arm/mach-iop32x/iq80321.c +++ b/arch/arm/mach-iop32x/iq80321.c @@ -19,6 +19,7 @@ #include <linux/mtd/physmap.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/gpio/machine.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -168,6 +169,8 @@ static struct platform_device iq80321_serial_device = { static void __init iq80321_init_machine(void) { register_iop32x_gpio(); + gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup); + gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup); platform_device_register(&iop3xx_i2c0_device); platform_device_register(&iop3xx_i2c1_device); platform_device_register(&iq80321_flash_device); diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index 1948180594f4..26d76b377e79 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -27,6 +27,7 @@ #include <linux/reboot.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -341,6 +342,7 @@ device_initcall(n2100_request_gpios); static void __init n2100_init_machine(void) { register_iop32x_gpio(); + gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup); platform_device_register(&iop3xx_i2c0_device); platform_device_register(&n2100_flash_device); platform_device_register(&n2100_serial_device); diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index fc5378b00f3d..f7211b57b1e7 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -33,7 +33,7 @@ config MACH_AVILA help Say 'Y' here if you want your kernel to support the Gateworks Avila Network Platform. For more information on this platform, - see <file:Documentation/arm/IXP4xx>. + see <file:Documentation/arm/ixp4xx.rst>. config MACH_LOFT bool "Loft" @@ -49,7 +49,7 @@ config ARCH_ADI_COYOTE help Say 'Y' here if you want your kernel to support the ADI Engineering Coyote Gateway Reference Platform. For more - information on this platform, see <file:Documentation/arm/IXP4xx>. + information on this platform, see <file:Documentation/arm/ixp4xx.rst>. config MACH_GATEWAY7001 bool "Gateway 7001" @@ -72,21 +72,21 @@ config ARCH_IXDP425 help Say 'Y' here if you want your kernel to support Intel's IXDP425 Development Platform (Also known as Richfield). - For more information on this platform, see <file:Documentation/arm/IXP4xx>. + For more information on this platform, see <file:Documentation/arm/ixp4xx.rst>. config MACH_IXDPG425 bool "IXDPG425" help Say 'Y' here if you want your kernel to support Intel's IXDPG425 Development Platform (Also known as Montajade). - For more information on this platform, see <file:Documentation/arm/IXP4xx>. + For more information on this platform, see <file:Documentation/arm/ixp4xx.rst>. config MACH_IXDP465 bool "IXDP465" help Say 'Y' here if you want your kernel to support Intel's IXDP465 Development Platform (Also known as BMP). - For more information on this platform, see <file:Documentation/arm/IXP4xx>. + For more information on this platform, see <file:Documentation/arm/ixp4xx.rst>. config MACH_GORAMO_MLR bool "GORAMO Multi Link Router" @@ -99,7 +99,7 @@ config MACH_KIXRP435 help Say 'Y' here if you want your kernel to support Intel's KIXRP435 Reference Platform. - For more information on this platform, see <file:Documentation/arm/IXP4xx>. + For more information on this platform, see <file:Documentation/arm/ixp4xx.rst>. # # IXCDP1100 is the exact same HW as IXDP425, but with a different machine @@ -116,7 +116,7 @@ config ARCH_PRPMC1100 help Say 'Y' here if you want your kernel to support the Motorola PrPCM1100 Processor Mezanine Module. For more information on - this platform, see <file:Documentation/arm/IXP4xx>. + this platform, see <file:Documentation/arm/ixp4xx.rst>. config MACH_NAS100D bool diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile index f8b0dccac8dc..739b38be5696 100644 --- a/arch/arm/mach-keystone/Makefile +++ b/arch/arm/mach-keystone/Makefile @@ -1,9 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 obj-y := keystone.o smc.o -plus_sec := $(call as-instr,.arch_extension sec,+sec) -AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec) - obj-$(CONFIG_SMP) += platsmp.o # PM domain driver for Keystone SOCs diff --git a/arch/arm/mach-keystone/smc.S b/arch/arm/mach-keystone/smc.S index 76d0bf6ac73c..21ef75cf5370 100644 --- a/arch/arm/mach-keystone/smc.S +++ b/arch/arm/mach-keystone/smc.S @@ -18,6 +18,7 @@ * * Return: Non zero value on failure */ + .arch_extension sec ENTRY(keystone_cpu_smc) stmfd sp!, {r4-r11, lr} smc #0 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 85d1b13c9215..600650551621 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -41,18 +41,10 @@ obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) $(smp-y) sleep44xx.o obj-$(CONFIG_SOC_AM43XX) += $(omap-4-5-common) obj-$(CONFIG_SOC_DRA7XX) += $(omap-4-5-common) $(smp-y) sleep44xx.o -plus_sec := $(call as-instr,.arch_extension sec,+sec) -AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec) -AFLAGS_omap-smc.o :=-Wa,-march=armv7-a$(plus_sec) -AFLAGS_sleep44xx.o :=-Wa,-march=armv7-a$(plus_sec) - # Functions loaded to SRAM obj-$(CONFIG_SOC_OMAP2420) += sram242x.o obj-$(CONFIG_SOC_OMAP2430) += sram243x.o -AFLAGS_sram242x.o :=-Wa,-march=armv6 -AFLAGS_sram243x.o :=-Wa,-march=armv6 - # Restart code (OMAP4/5 currently in omap4-common.c) obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o obj-$(CONFIG_SOC_OMAP2430) += omap2-restart.o @@ -94,11 +86,6 @@ obj-$(CONFIG_PM_DEBUG) += pm-debug.o obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o -AFLAGS_sleep24xx.o :=-Wa,-march=armv6 -AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec) -AFLAGS_sleep33xx.o :=-Wa,-march=armv7-a$(plus_sec) -AFLAGS_sleep43xx.o :=-Wa,-march=armv7-a$(plus_sec) - endif ifeq ($(CONFIG_CPU_IDLE),y) diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 7d0db77ab8cb..1762f919941f 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -55,6 +55,8 @@ ENDPROC(omap5_secondary_startup) * omap5_secondary_startup if the primary CPU was put into HYP mode by * the boot loader. */ + .arch armv7-a + .arch_extension sec ENTRY(omap5_secondary_hyp_startup) wait_2: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 ldr r0, [r2] diff --git a/arch/arm/mach-omap2/omap-smc.S b/arch/arm/mach-omap2/omap-smc.S index 630b9bd099e0..fd2bcd91f4a1 100644 --- a/arch/arm/mach-omap2/omap-smc.S +++ b/arch/arm/mach-omap2/omap-smc.S @@ -20,7 +20,8 @@ * link register "lr". * Function signature : void omap_smc1(u32 fn, u32 arg) */ - + .arch armv7-a + .arch_extension sec ENTRY(omap_smc1) stmfd sp!, {r2-r12, lr} mov r12, r0 diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e0350476feaa..203664c40d3d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -3442,6 +3442,7 @@ static int omap_hwmod_check_module(struct device *dev, * @dev: struct device * @oh: module * @sysc_fields: sysc register bits + * @clockdomain: clockdomain * @rev_offs: revision register offset * @sysc_offs: sysconfig register offset * @syss_offs: sysstatus register offset @@ -3453,6 +3454,7 @@ static int omap_hwmod_check_module(struct device *dev, static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh, const struct ti_sysc_module_data *data, struct sysc_regbits *sysc_fields, + struct clockdomain *clkdm, s32 rev_offs, s32 sysc_offs, s32 syss_offs, u32 sysc_flags, u32 idlemodes) @@ -3460,8 +3462,6 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh, struct omap_hwmod_class_sysconfig *sysc; struct omap_hwmod_class *class = NULL; struct omap_hwmod_ocp_if *oi = NULL; - struct clockdomain *clkdm = NULL; - struct clk *clk = NULL; void __iomem *regs = NULL; unsigned long flags; @@ -3508,36 +3508,6 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh, oi->user = OCP_USER_MPU | OCP_USER_SDMA; } - if (!oh->_clk) { - struct clk_hw_omap *hwclk; - - clk = of_clk_get_by_name(dev->of_node, "fck"); - if (!IS_ERR(clk)) - clk_prepare(clk); - else - clk = NULL; - - /* - * Populate clockdomain based on dts clock. It is needed for - * clkdm_deny_idle() and clkdm_allow_idle() until we have have - * interconnect driver and reset driver capable of blocking - * clockdomain idle during reset, enable and idle. - */ - if (clk) { - hwclk = to_clk_hw_omap(__clk_get_hw(clk)); - if (hwclk && hwclk->clkdm_name) - clkdm = clkdm_lookup(hwclk->clkdm_name); - } - - /* - * Note that we assume interconnect driver manages the clocks - * and do not need to populate oh->_clk for dynamically - * allocated modules. - */ - clk_unprepare(clk); - clk_put(clk); - } - spin_lock_irqsave(&oh->_lock, flags); if (regs) oh->_mpu_rt_va = regs; @@ -3623,7 +3593,7 @@ int omap_hwmod_init_module(struct device *dev, u32 sysc_flags, idlemodes; int error; - if (!dev || !data) + if (!dev || !data || !data->name || !cookie) return -EINVAL; oh = _lookup(data->name); @@ -3694,7 +3664,8 @@ int omap_hwmod_init_module(struct device *dev, return error; return omap_hwmod_allocate_module(dev, oh, data, sysc_fields, - rev_offs, sysc_offs, syss_offs, + cookie->clkdm, rev_offs, + sysc_offs, syss_offs, sysc_flags, idlemodes); } diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 4c3543bae562..adb6271f819b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -529,7 +529,7 @@ static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = { .sysc_fields = &omap_hwmod_sysc_type1, }; -struct omap_hwmod_class am33xx_gpio_hwmod_class = { +static struct omap_hwmod_class am33xx_gpio_hwmod_class = { .name = "gpio", .sysc = &am33xx_gpio_sysc, }; @@ -539,7 +539,7 @@ static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { { .role = "dbclk", .clk = "gpio1_dbclk" }, }; -struct omap_hwmod am33xx_gpio1_hwmod = { +static struct omap_hwmod am33xx_gpio1_hwmod = { .name = "gpio2", .class = &am33xx_gpio_hwmod_class, .clkdm_name = "l4ls_clkdm", @@ -559,7 +559,7 @@ static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { { .role = "dbclk", .clk = "gpio2_dbclk" }, }; -struct omap_hwmod am33xx_gpio2_hwmod = { +static struct omap_hwmod am33xx_gpio2_hwmod = { .name = "gpio3", .class = &am33xx_gpio_hwmod_class, .clkdm_name = "l4ls_clkdm", @@ -579,7 +579,7 @@ static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { { .role = "dbclk", .clk = "gpio3_dbclk" }, }; -struct omap_hwmod am33xx_gpio3_hwmod = { +static struct omap_hwmod am33xx_gpio3_hwmod = { .name = "gpio4", .class = &am33xx_gpio_hwmod_class, .clkdm_name = "l4ls_clkdm", diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index b0f8c9a70c68..6c6f8fce854e 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -26,6 +26,7 @@ #include <linux/platform_data/wkup_m3.h> #include <linux/platform_data/asoc-ti-mcbsp.h> +#include "clockdomain.h" #include "common.h" #include "common-board-devices.h" #include "control.h" @@ -460,6 +461,62 @@ static void __init dra7x_evm_mmc_quirk(void) } #endif +static struct clockdomain *ti_sysc_find_one_clockdomain(struct clk *clk) +{ + struct clockdomain *clkdm = NULL; + struct clk_hw_omap *hwclk; + + hwclk = to_clk_hw_omap(__clk_get_hw(clk)); + if (hwclk && hwclk->clkdm_name) + clkdm = clkdm_lookup(hwclk->clkdm_name); + + return clkdm; +} + +/** + * ti_sysc_clkdm_init - find clockdomain based on clock + * @fck: device functional clock + * @ick: device interface clock + * @dev: struct device + * + * Populate clockdomain based on clock. It is needed for + * clkdm_deny_idle() and clkdm_allow_idle() for blocking clockdomain + * clockdomain idle during reset, enable and idle. + * + * Note that we assume interconnect driver manages the clocks + * and do not need to populate oh->_clk for dynamically + * allocated modules. + */ +static int ti_sysc_clkdm_init(struct device *dev, + struct clk *fck, struct clk *ick, + struct ti_sysc_cookie *cookie) +{ + if (fck) + cookie->clkdm = ti_sysc_find_one_clockdomain(fck); + if (cookie->clkdm) + return 0; + if (ick) + cookie->clkdm = ti_sysc_find_one_clockdomain(ick); + if (cookie->clkdm) + return 0; + + return -ENODEV; +} + +static void ti_sysc_clkdm_deny_idle(struct device *dev, + const struct ti_sysc_cookie *cookie) +{ + if (cookie->clkdm) + clkdm_deny_idle(cookie->clkdm); +} + +static void ti_sysc_clkdm_allow_idle(struct device *dev, + const struct ti_sysc_cookie *cookie) +{ + if (cookie->clkdm) + clkdm_allow_idle(cookie->clkdm); +} + static int ti_sysc_enable_module(struct device *dev, const struct ti_sysc_cookie *cookie) { @@ -491,6 +548,9 @@ static struct of_dev_auxdata omap_auxdata_lookup[]; static struct ti_sysc_platform_data ti_sysc_pdata = { .auxdata = omap_auxdata_lookup, + .init_clockdomain = ti_sysc_clkdm_init, + .clkdm_deny_idle = ti_sysc_clkdm_deny_idle, + .clkdm_allow_idle = ti_sysc_clkdm_allow_idle, .init_module = omap_hwmod_init_module, .enable_module = ti_sysc_enable_module, .idle_module = ti_sysc_idle_module, diff --git a/arch/arm/mach-omap2/sleep33xx.S b/arch/arm/mach-omap2/sleep33xx.S index 47a816468cdb..68fee339d3f1 100644 --- a/arch/arm/mach-omap2/sleep33xx.S +++ b/arch/arm/mach-omap2/sleep33xx.S @@ -24,6 +24,7 @@ #define BIT(nr) (1 << (nr)) .arm + .arch armv7-a .align 3 ENTRY(am33xx_do_wfi) diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 75ea4723ec0e..ac1324c6453b 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -83,6 +83,8 @@ ENDPROC(enable_omap3630_toggle_l2_on_restore) * * r0 = physical address of the parameters */ + .arch armv7-a + .arch_extension sec ENTRY(save_secure_ram_context) stmfd sp!, {r4 - r11, lr} @ save registers on stack mov r3, r0 @ physical address of parameters diff --git a/arch/arm/mach-omap2/sleep43xx.S b/arch/arm/mach-omap2/sleep43xx.S index 0c1031442571..c1f4e4852644 100644 --- a/arch/arm/mach-omap2/sleep43xx.S +++ b/arch/arm/mach-omap2/sleep43xx.S @@ -56,6 +56,8 @@ #define RTC_PMIC_EXT_WAKEUP_EN BIT(0) .arm + .arch armv7-a + .arch_extension sec .align 3 ENTRY(am43xx_do_wfi) diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 934033ad847f..f60f6a9aed73 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -18,8 +18,11 @@ #include "omap44xx.h" #include "omap4-sar-layout.h" + .arch armv7-a + #if defined(CONFIG_SMP) && defined(CONFIG_PM) + .arch_extension sec .macro DO_SMC dsb smc #0 diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h index 72b5c3db37dc..a3af4a2f9446 100644 --- a/arch/arm/mach-pxa/include/mach/lubbock.h +++ b/arch/arm/mach-pxa/include/mach/lubbock.h @@ -47,7 +47,3 @@ #define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6) #define LUBBOCK_SA1111_IRQ_BASE (LUBBOCK_NR_IRQS + 32) - -#ifndef __ASSEMBLY__ -extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set); -#endif diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index a3ecccc24ec5..742d18a1f7dc 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -116,12 +116,11 @@ void lubbock_set_hexled(uint32_t value) static struct gpio_chip *lubbock_misc_wr_gc; -void lubbock_set_misc_wr(unsigned int mask, unsigned int set) +static void lubbock_set_misc_wr(unsigned int mask, unsigned int set) { unsigned long m = mask, v = set; lubbock_misc_wr_gc->set_multiple(lubbock_misc_wr_gc, &m, &v); } -EXPORT_SYMBOL(lubbock_set_misc_wr); static int lubbock_udc_is_connected(void) { diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index 909fffee0240..649e0a54784c 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -269,19 +269,25 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) sram_base_addr = of_iomap(node, 0); if (!sram_base_addr) { pr_err("%s: could not map sram registers\n", __func__); + of_node_put(node); return; } - if (has_pmu && rockchip_smp_prepare_pmu()) + if (has_pmu && rockchip_smp_prepare_pmu()) { + of_node_put(node); return; + } if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) { - if (rockchip_smp_prepare_sram(node)) + if (rockchip_smp_prepare_sram(node)) { + of_node_put(node); return; + } /* enable the SCU power domain */ pmu_set_power_domain(PMU_PWRDN_SCU, true); + of_node_put(node); node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); if (!node) { pr_err("%s: missing scu\n", __func__); @@ -291,6 +297,7 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) scu_base_addr = of_iomap(node, 0); if (!scu_base_addr) { pr_err("%s: could not map scu registers\n", __func__); + of_node_put(node); return; } @@ -309,6 +316,7 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) asm ("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr)); ncores = ((l2ctlr >> 24) & 0x3) + 1; } + of_node_put(node); /* Make sure that all cores except the first are really off */ for (i = 1; i < ncores; i++) diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c index 744b5b332e42..87389d9456b9 100644 --- a/arch/arm/mach-rockchip/pm.c +++ b/arch/arm/mach-rockchip/pm.c @@ -257,12 +257,14 @@ static int __init rk3288_suspend_init(struct device_node *np) rk3288_bootram_base = of_iomap(sram_np, 0); if (!rk3288_bootram_base) { pr_err("%s: could not map bootram base\n", __func__); + of_node_put(sram_np); return -ENOMEM; } ret = of_address_to_resource(sram_np, 0, &res); if (ret) { pr_err("%s: could not get bootram phy addr\n", __func__); + of_node_put(sram_np); return ret; } rk3288_bootram_phy = res.start; diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile index 056ef5460290..90a645a18444 100644 --- a/arch/arm/mach-rpc/Makefile +++ b/arch/arm/mach-rpc/Makefile @@ -5,4 +5,5 @@ # Object file lists. -obj-y := dma.o ecard.o fiq.o irq.o riscpc.o time.o +obj-y :=dma.o ecard.o ecard-loader.o fiq.o floppydma.o io-acorn.o irq.o \ + riscpc.o time.o diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c index 488d5c3b37f4..50e0f97afd75 100644 --- a/arch/arm/mach-rpc/dma.c +++ b/arch/arm/mach-rpc/dma.c @@ -24,10 +24,11 @@ struct iomd_dma { struct dma_struct dma; - unsigned int state; - unsigned long base; /* Controller base address */ + void __iomem *base; /* Controller base address */ int irq; /* Controller IRQ */ - struct scatterlist cur_sg; /* Current controller buffer */ + unsigned int state; + dma_addr_t cur_addr; + unsigned int cur_len; dma_addr_t dma_addr; unsigned int dma_len; }; @@ -50,13 +51,13 @@ typedef enum { #define CR (IOMD_IO0CR - IOMD_IO0CURA) #define ST (IOMD_IO0ST - IOMD_IO0CURA) -static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma) +static void iomd_get_next_sg(struct iomd_dma *idma) { unsigned long end, offset, flags = 0; if (idma->dma.sg) { - sg->dma_address = idma->dma_addr; - offset = sg->dma_address & ~PAGE_MASK; + idma->cur_addr = idma->dma_addr; + offset = idma->cur_addr & ~PAGE_MASK; end = offset + idma->dma_len; @@ -66,7 +67,7 @@ static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma) if (offset + TRANSFER_SIZE >= end) flags |= DMA_END_L; - sg->length = end - TRANSFER_SIZE; + idma->cur_len = end - TRANSFER_SIZE; idma->dma_len -= end - offset; idma->dma_addr += end - offset; @@ -84,52 +85,49 @@ static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma) } } else { flags = DMA_END_S | DMA_END_L; - sg->dma_address = 0; - sg->length = 0; + idma->cur_addr = 0; + idma->cur_len = 0; } - sg->length |= flags; + idma->cur_len |= flags; } static irqreturn_t iomd_dma_handle(int irq, void *dev_id) { struct iomd_dma *idma = dev_id; - unsigned long base = idma->base; + void __iomem *base = idma->base; + unsigned int state = idma->state; + unsigned int status, cur, end; do { - unsigned int status; - - status = iomd_readb(base + ST); + status = readb(base + ST); if (!(status & DMA_ST_INT)) - return IRQ_HANDLED; - - if ((idma->state ^ status) & DMA_ST_AB) - iomd_get_next_sg(&idma->cur_sg, idma); - - switch (status & (DMA_ST_OFL | DMA_ST_AB)) { - case DMA_ST_OFL: /* OIA */ - case DMA_ST_AB: /* .IB */ - iomd_writel(idma->cur_sg.dma_address, base + CURA); - iomd_writel(idma->cur_sg.length, base + ENDA); - idma->state = DMA_ST_AB; - break; - - case DMA_ST_OFL | DMA_ST_AB: /* OIB */ - case 0: /* .IA */ - iomd_writel(idma->cur_sg.dma_address, base + CURB); - iomd_writel(idma->cur_sg.length, base + ENDB); - idma->state = 0; - break; + goto out; + + if ((state ^ status) & DMA_ST_AB) + iomd_get_next_sg(idma); + + // This efficiently implements state = OFL != AB ? AB : 0 + state = ((status >> 2) ^ status) & DMA_ST_AB; + if (state) { + cur = CURA; + end = ENDA; + } else { + cur = CURB; + end = ENDB; } + writel(idma->cur_addr, base + cur); + writel(idma->cur_len, base + end); if (status & DMA_ST_OFL && - idma->cur_sg.length == (DMA_END_S|DMA_END_L)) + idma->cur_len == (DMA_END_S|DMA_END_L)) break; } while (1); - idma->state = ~DMA_ST_AB; - disable_irq(irq); - + state = ~DMA_ST_AB; + disable_irq_nosync(irq); +out: + idma->state = state; return IRQ_HANDLED; } @@ -157,7 +155,7 @@ static struct device isa_dma_dev = { static void iomd_enable_dma(unsigned int chan, dma_t *dma) { struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma); - unsigned long dma_base = idma->base; + void __iomem *base = idma->base; unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E; if (idma->dma.invalid) { @@ -177,27 +175,30 @@ static void iomd_enable_dma(unsigned int chan, dma_t *dma) DMA_FROM_DEVICE : DMA_TO_DEVICE); } - iomd_writeb(DMA_CR_C, dma_base + CR); + idma->dma_addr = idma->dma.sg->dma_address; + idma->dma_len = idma->dma.sg->length; + + writeb(DMA_CR_C, base + CR); idma->state = DMA_ST_AB; } if (idma->dma.dma_mode == DMA_MODE_READ) ctrl |= DMA_CR_D; - iomd_writeb(ctrl, dma_base + CR); + writeb(ctrl, base + CR); enable_irq(idma->irq); } static void iomd_disable_dma(unsigned int chan, dma_t *dma) { struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma); - unsigned long dma_base = idma->base; + void __iomem *base = idma->base; unsigned long flags; local_irq_save(flags); if (idma->state != ~DMA_ST_AB) disable_irq(idma->irq); - iomd_writeb(0, dma_base + CR); + writeb(0, base + CR); local_irq_restore(flags); } @@ -360,17 +361,17 @@ static int __init rpc_dma_init(void) */ iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT); - iomd_dma[DMA_0].base = IOMD_IO0CURA; + iomd_dma[DMA_0].base = IOMD_BASE + IOMD_IO0CURA; iomd_dma[DMA_0].irq = IRQ_DMA0; - iomd_dma[DMA_1].base = IOMD_IO1CURA; + iomd_dma[DMA_1].base = IOMD_BASE + IOMD_IO1CURA; iomd_dma[DMA_1].irq = IRQ_DMA1; - iomd_dma[DMA_2].base = IOMD_IO2CURA; + iomd_dma[DMA_2].base = IOMD_BASE + IOMD_IO2CURA; iomd_dma[DMA_2].irq = IRQ_DMA2; - iomd_dma[DMA_3].base = IOMD_IO3CURA; + iomd_dma[DMA_3].base = IOMD_BASE + IOMD_IO3CURA; iomd_dma[DMA_3].irq = IRQ_DMA3; - iomd_dma[DMA_S0].base = IOMD_SD0CURA; + iomd_dma[DMA_S0].base = IOMD_BASE + IOMD_SD0CURA; iomd_dma[DMA_S0].irq = IRQ_DMAS0; - iomd_dma[DMA_S1].base = IOMD_SD1CURA; + iomd_dma[DMA_S1].base = IOMD_BASE + IOMD_SD1CURA; iomd_dma[DMA_S1].irq = IRQ_DMAS1; for (i = DMA_0; i <= DMA_S1; i++) { diff --git a/arch/arm/lib/ecard.S b/arch/arm/mach-rpc/ecard-loader.S index eb8ac0412da6..eb8ac0412da6 100644 --- a/arch/arm/lib/ecard.S +++ b/arch/arm/mach-rpc/ecard-loader.S diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c index cf0593bc42d2..75cfad2cb143 100644 --- a/arch/arm/mach-rpc/ecard.c +++ b/arch/arm/mach-rpc/ecard.c @@ -67,17 +67,21 @@ struct expcard_blacklist { unsigned short manufacturer; unsigned short product; const char *type; + void (*init)(ecard_t *ec); }; static ecard_t *cards; static ecard_t *slot_to_expcard[MAX_ECARDS]; static unsigned int ectcr; +static void atomwide_3p_quirk(ecard_t *ec); + /* List of descriptions of cards which don't have an extended * identification, or chunk directories containing a description. */ static struct expcard_blacklist __initdata blacklist[] = { - { MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" } + { MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" }, + { MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, NULL, atomwide_3p_quirk }, }; asmlinkage extern int @@ -493,18 +497,21 @@ static void ecard_dump_irq_state(void) printk("Expansion card IRQ state:\n"); for (ec = cards; ec; ec = ec->next) { + const char *claimed; + if (ec->slot_no == 8) continue; - printk(" %d: %sclaimed, ", - ec->slot_no, ec->claimed ? "" : "not "); + claimed = ec->claimed ? "" : "not "; if (ec->ops && ec->ops->irqpending && ec->ops != &ecard_default_ops) - printk("irq %spending\n", + printk(" %d: %sclaimed irq %spending\n", + ec->slot_no, claimed, ec->ops->irqpending(ec) ? "" : "not "); else - printk("irqaddr %p, mask = %02X, status = %02X\n", + printk(" %d: %sclaimed irqaddr %p, mask = %02X, status = %02X\n", + ec->slot_no, claimed, ec->irqaddr, ec->irqmask, readb(ec->irqaddr)); } } @@ -865,6 +872,16 @@ void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res, } EXPORT_SYMBOL(ecardm_iomap); +static void atomwide_3p_quirk(ecard_t *ec) +{ + void __iomem *addr = __ecard_address(ec, ECARD_IOC, ECARD_SYNC); + unsigned int i; + + /* Disable interrupts on each port */ + for (i = 0x2000; i <= 0x2800; i += 0x0400) + writeb(0, addr + i + 4); +} + /* * Probe for an expansion card. * @@ -921,7 +938,10 @@ static int __init ecard_probe(int slot, unsigned irq, card_type_t type) for (i = 0; i < ARRAY_SIZE(blacklist); i++) if (blacklist[i].manufacturer == ec->cid.manufacturer && blacklist[i].product == ec->cid.product) { - ec->card_desc = blacklist[i].type; + if (blacklist[i].type) + ec->card_desc = blacklist[i].type; + if (blacklist[i].init) + blacklist[i].init(ec); break; } diff --git a/arch/arm/lib/floppydma.S b/arch/arm/mach-rpc/floppydma.S index 6698b83050dc..6698b83050dc 100644 --- a/arch/arm/lib/floppydma.S +++ b/arch/arm/mach-rpc/floppydma.S diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h index a023b5f9bbbb..1fbe7eb956fd 100644 --- a/arch/arm/mach-rpc/include/mach/uncompress.h +++ b/arch/arm/mach-rpc/include/mach/uncompress.h @@ -115,29 +115,22 @@ static void arch_decomp_setup(void) struct tag *t = (struct tag *)params; unsigned int nr_pages = 0, page_size = PAGE_SIZE; - if (t->hdr.tag == ATAG_CORE) - { - for (; t->hdr.size; t = tag_next(t)) - { - if (t->hdr.tag == ATAG_VIDEOTEXT) - { + if (t->hdr.tag == ATAG_CORE) { + for (; t->hdr.size; t = tag_next(t)) { + if (t->hdr.tag == ATAG_VIDEOTEXT) { video_num_rows = t->u.videotext.video_lines; video_num_cols = t->u.videotext.video_cols; - bytes_per_char_h = t->u.videotext.video_points; - bytes_per_char_v = t->u.videotext.video_points; video_x = t->u.videotext.x; video_y = t->u.videotext.y; - } - - if (t->hdr.tag == ATAG_MEM) - { + } else if (t->hdr.tag == ATAG_VIDEOLFB) { + bytes_per_char_h = t->u.videolfb.lfb_depth; + bytes_per_char_v = 8; + } else if (t->hdr.tag == ATAG_MEM) { page_size = PAGE_SIZE; nr_pages += (t->u.mem.size / PAGE_SIZE); } } - } - else - { + } else { nr_pages = params->nr_pages; page_size = params->page_size; video_num_rows = params->video_num_rows; diff --git a/arch/arm/lib/io-acorn.S b/arch/arm/mach-rpc/io-acorn.S index b9082a2a2a01..b9082a2a2a01 100644 --- a/arch/arm/lib/io-acorn.S +++ b/arch/arm/mach-rpc/io-acorn.S diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c index b8a61cb11207..803aeb126f0e 100644 --- a/arch/arm/mach-rpc/irq.c +++ b/arch/arm/mach-rpc/irq.c @@ -8,117 +8,71 @@ #include <asm/irq.h> #include <asm/fiq.h> -static void iomd_ack_irq_a(struct irq_data *d) -{ - unsigned int val, mask; - - mask = 1 << d->irq; - val = iomd_readb(IOMD_IRQMASKA); - iomd_writeb(val & ~mask, IOMD_IRQMASKA); - iomd_writeb(mask, IOMD_IRQCLRA); -} - -static void iomd_mask_irq_a(struct irq_data *d) -{ - unsigned int val, mask; +// These are offsets from the stat register for each IRQ bank +#define STAT 0x00 +#define REQ 0x04 +#define CLR 0x04 +#define MASK 0x08 - mask = 1 << d->irq; - val = iomd_readb(IOMD_IRQMASKA); - iomd_writeb(val & ~mask, IOMD_IRQMASKA); -} - -static void iomd_unmask_irq_a(struct irq_data *d) +static void __iomem *iomd_get_base(struct irq_data *d) { - unsigned int val, mask; + void *cd = irq_data_get_irq_chip_data(d); - mask = 1 << d->irq; - val = iomd_readb(IOMD_IRQMASKA); - iomd_writeb(val | mask, IOMD_IRQMASKA); + return (void __iomem *)(unsigned long)cd; } -static struct irq_chip iomd_a_chip = { - .irq_ack = iomd_ack_irq_a, - .irq_mask = iomd_mask_irq_a, - .irq_unmask = iomd_unmask_irq_a, -}; - -static void iomd_mask_irq_b(struct irq_data *d) +static void iomd_set_base_mask(unsigned int irq, void __iomem *base, u32 mask) { - unsigned int val, mask; + struct irq_data *d = irq_get_irq_data(irq); - mask = 1 << (d->irq & 7); - val = iomd_readb(IOMD_IRQMASKB); - iomd_writeb(val & ~mask, IOMD_IRQMASKB); + d->mask = mask; + irq_set_chip_data(irq, (void *)(unsigned long)base); } -static void iomd_unmask_irq_b(struct irq_data *d) +static void iomd_irq_mask_ack(struct irq_data *d) { - unsigned int val, mask; + void __iomem *base = iomd_get_base(d); + unsigned int val, mask = d->mask; - mask = 1 << (d->irq & 7); - val = iomd_readb(IOMD_IRQMASKB); - iomd_writeb(val | mask, IOMD_IRQMASKB); + val = readb(base + MASK); + writeb(val & ~mask, base + MASK); + writeb(mask, base + CLR); } -static struct irq_chip iomd_b_chip = { - .irq_ack = iomd_mask_irq_b, - .irq_mask = iomd_mask_irq_b, - .irq_unmask = iomd_unmask_irq_b, -}; - -static void iomd_mask_irq_dma(struct irq_data *d) +static void iomd_irq_mask(struct irq_data *d) { - unsigned int val, mask; + void __iomem *base = iomd_get_base(d); + unsigned int val, mask = d->mask; - mask = 1 << (d->irq & 7); - val = iomd_readb(IOMD_DMAMASK); - iomd_writeb(val & ~mask, IOMD_DMAMASK); + val = readb(base + MASK); + writeb(val & ~mask, base + MASK); } -static void iomd_unmask_irq_dma(struct irq_data *d) +static void iomd_irq_unmask(struct irq_data *d) { - unsigned int val, mask; + void __iomem *base = iomd_get_base(d); + unsigned int val, mask = d->mask; - mask = 1 << (d->irq & 7); - val = iomd_readb(IOMD_DMAMASK); - iomd_writeb(val | mask, IOMD_DMAMASK); + val = readb(base + MASK); + writeb(val | mask, base + MASK); } -static struct irq_chip iomd_dma_chip = { - .irq_ack = iomd_mask_irq_dma, - .irq_mask = iomd_mask_irq_dma, - .irq_unmask = iomd_unmask_irq_dma, +static struct irq_chip iomd_chip_clr = { + .irq_mask_ack = iomd_irq_mask_ack, + .irq_mask = iomd_irq_mask, + .irq_unmask = iomd_irq_unmask, }; -static void iomd_mask_irq_fiq(struct irq_data *d) -{ - unsigned int val, mask; - - mask = 1 << (d->irq & 7); - val = iomd_readb(IOMD_FIQMASK); - iomd_writeb(val & ~mask, IOMD_FIQMASK); -} - -static void iomd_unmask_irq_fiq(struct irq_data *d) -{ - unsigned int val, mask; - - mask = 1 << (d->irq & 7); - val = iomd_readb(IOMD_FIQMASK); - iomd_writeb(val | mask, IOMD_FIQMASK); -} - -static struct irq_chip iomd_fiq_chip = { - .irq_ack = iomd_mask_irq_fiq, - .irq_mask = iomd_mask_irq_fiq, - .irq_unmask = iomd_unmask_irq_fiq, +static struct irq_chip iomd_chip_noclr = { + .irq_mask = iomd_irq_mask, + .irq_unmask = iomd_irq_unmask, }; extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end; void __init rpc_init_irq(void) { - unsigned int irq, clr, set = 0; + unsigned int irq, clr, set; iomd_writeb(0, IOMD_IRQMASKA); iomd_writeb(0, IOMD_IRQMASKB); @@ -130,6 +84,7 @@ void __init rpc_init_irq(void) for (irq = 0; irq < NR_IRQS; irq++) { clr = IRQ_NOREQUEST; + set = 0; if (irq <= 6 || (irq >= 9 && irq <= 15)) clr |= IRQ_NOPROBE; @@ -140,30 +95,37 @@ void __init rpc_init_irq(void) switch (irq) { case 0 ... 7: - irq_set_chip_and_handler(irq, &iomd_a_chip, + irq_set_chip_and_handler(irq, &iomd_chip_clr, handle_level_irq); irq_modify_status(irq, clr, set); + iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATA, + BIT(irq)); break; case 8 ... 15: - irq_set_chip_and_handler(irq, &iomd_b_chip, + irq_set_chip_and_handler(irq, &iomd_chip_noclr, handle_level_irq); irq_modify_status(irq, clr, set); + iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATB, + BIT(irq - 8)); break; case 16 ... 21: - irq_set_chip_and_handler(irq, &iomd_dma_chip, + irq_set_chip_and_handler(irq, &iomd_chip_noclr, handle_level_irq); irq_modify_status(irq, clr, set); + iomd_set_base_mask(irq, IOMD_BASE + IOMD_DMASTAT, + BIT(irq - 16)); break; case 64 ... 71: - irq_set_chip(irq, &iomd_fiq_chip); + irq_set_chip(irq, &iomd_chip_noclr); irq_modify_status(irq, clr, set); + iomd_set_base_mask(irq, IOMD_BASE + IOMD_FIQSTAT, + BIT(irq - 64)); break; } } init_FIQ(FIQ_START); } - diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c index e97f93a0af1d..1d750152b160 100644 --- a/arch/arm/mach-rpc/time.c +++ b/arch/arm/mach-rpc/time.c @@ -10,7 +10,7 @@ * 04-Dec-1997 RMK Updated for new arch/arm/time.c * 13=Jun-2004 DS Moved to arch/arm/common b/c shared w/CLPS7500 */ -#include <linux/timex.h> +#include <linux/clocksource.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -24,11 +24,15 @@ #define RPC_CLOCK_FREQ 2000000 #define RPC_LATCH DIV_ROUND_CLOSEST(RPC_CLOCK_FREQ, HZ) -static u32 ioc_timer_gettimeoffset(void) +static u32 ioc_time; + +static u64 ioc_timer_read(struct clocksource *cs) { unsigned int count1, count2, status; - long offset; + unsigned long flags; + u32 ticks; + local_irq_save(flags); ioc_writeb (0, IOC_T0LATCH); barrier (); count1 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8); @@ -38,27 +42,34 @@ static u32 ioc_timer_gettimeoffset(void) ioc_writeb (0, IOC_T0LATCH); barrier (); count2 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8); + ticks = ioc_time + RPC_LATCH - count2; + local_irq_restore(flags); - offset = count2; if (count2 < count1) { /* - * We have not had an interrupt between reading count1 - * and count2. + * The timer has not reloaded between reading count1 and + * count2, check whether an interrupt was actually pending. */ if (status & (1 << 5)) - offset -= RPC_LATCH; + ticks += RPC_LATCH; } else if (count2 > count1) { /* - * We have just had another interrupt between reading - * count1 and count2. + * The timer has reloaded, so count2 indicates the new + * count since the wrap. The interrupt would not have + * been processed, so add the missed ticks. */ - offset -= RPC_LATCH; + ticks += RPC_LATCH; } - offset = (RPC_LATCH - offset) * (tick_nsec / 1000); - return DIV_ROUND_CLOSEST(offset, RPC_LATCH) * 1000; + return ticks; } +static struct clocksource ioctime_clocksource = { + .read = ioc_timer_read, + .mask = CLOCKSOURCE_MASK(32), + .rating = 100, +}; + void __init ioctime_init(void) { ioc_writeb(RPC_LATCH & 255, IOC_T0LTCHL); @@ -69,6 +80,7 @@ void __init ioctime_init(void) static irqreturn_t ioc_timer_interrupt(int irq, void *dev_id) { + ioc_time += RPC_LATCH; timer_tick(); return IRQ_HANDLED; } @@ -83,7 +95,7 @@ static struct irqaction ioc_timer_irq = { */ void __init ioc_timer_init(void) { - arch_gettimeoffset = ioc_timer_gettimeoffset; + WARN_ON(clocksource_register_hz(&ioctime_clocksource, RPC_CLOCK_FREQ)); ioctime_init(); setup_irq(IRQ_TIMER0, &ioc_timer_irq); } diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c index adcb90645460..c64988c609ad 100644 --- a/arch/arm/mach-s3c24xx/pm.c +++ b/arch/arm/mach-s3c24xx/pm.c @@ -5,7 +5,7 @@ // // S3C24XX Power Manager (Suspend-To-RAM) support // -// See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information +// See Documentation/arm/samsung-s3c24xx/suspend.rst for more information // // Parts based on arch/arm/mach-pxa/pm.c // diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index dd8d13fb8450..d96a101e5504 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -519,6 +519,29 @@ static const struct gpio_keys_platform_data assabet_keys_pdata = { .rep = 0, }; +static struct gpiod_lookup_table assabet_uart1_gpio_table = { + .dev_id = "sa11x0-uart.1", + .table = { + GPIO_LOOKUP("assabet", 16, "dtr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 17, "rts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 25, "dcd", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 26, "cts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 27, "dsr", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static struct gpiod_lookup_table assabet_uart3_gpio_table = { + .dev_id = "sa11x0-uart.3", + .table = { + GPIO_LOOKUP("assabet", 28, "cts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 29, "dsr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 30, "dcd", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 31, "rng", GPIO_ACTIVE_LOW), + { }, + }, +}; + static void __init assabet_init(void) { /* @@ -565,7 +588,10 @@ static void __init assabet_init(void) neponset_resources, ARRAY_SIZE(neponset_resources)); #endif } else { + gpiod_add_lookup_table(&assabet_uart1_gpio_table); + gpiod_add_lookup_table(&assabet_uart3_gpio_table); gpiod_add_lookup_table(&assabet_cf_vcc_gpio_table); + sa11x0_register_fixed_regulator(0, &assabet_cf_vcc_pdata, assabet_cf_vcc_consumers, ARRAY_SIZE(assabet_cf_vcc_consumers), @@ -655,74 +681,13 @@ static void assabet_uart_pm(struct uart_port *port, u_int state, u_int oldstate) { if (port->mapbase == _Ser1UTCR0) { if (state) - ASSABET_BCR_clear(ASSABET_BCR_RS232EN | - ASSABET_BCR_COM_RTS | - ASSABET_BCR_COM_DTR); - else - ASSABET_BCR_set(ASSABET_BCR_RS232EN | - ASSABET_BCR_COM_RTS | - ASSABET_BCR_COM_DTR); - } -} - -/* - * Assabet uses COM_RTS and COM_DTR for both UART1 (com port) - * and UART3 (radio module). We only handle them for UART1 here. - */ -static void assabet_set_mctrl(struct uart_port *port, u_int mctrl) -{ - if (port->mapbase == _Ser1UTCR0) { - u_int set = 0, clear = 0; - - if (mctrl & TIOCM_RTS) - clear |= ASSABET_BCR_COM_RTS; + ASSABET_BCR_clear(ASSABET_BCR_RS232EN); else - set |= ASSABET_BCR_COM_RTS; - - if (mctrl & TIOCM_DTR) - clear |= ASSABET_BCR_COM_DTR; - else - set |= ASSABET_BCR_COM_DTR; - - ASSABET_BCR_clear(clear); - ASSABET_BCR_set(set); - } -} - -static u_int assabet_get_mctrl(struct uart_port *port) -{ - u_int ret = 0; - u_int bsr = ASSABET_BSR; - - /* need 2 reads to read current value */ - bsr = ASSABET_BSR; - - if (port->mapbase == _Ser1UTCR0) { - if (bsr & ASSABET_BSR_COM_DCD) - ret |= TIOCM_CD; - if (bsr & ASSABET_BSR_COM_CTS) - ret |= TIOCM_CTS; - if (bsr & ASSABET_BSR_COM_DSR) - ret |= TIOCM_DSR; - } else if (port->mapbase == _Ser3UTCR0) { - if (bsr & ASSABET_BSR_RAD_DCD) - ret |= TIOCM_CD; - if (bsr & ASSABET_BSR_RAD_CTS) - ret |= TIOCM_CTS; - if (bsr & ASSABET_BSR_RAD_DSR) - ret |= TIOCM_DSR; - if (bsr & ASSABET_BSR_RAD_RI) - ret |= TIOCM_RI; - } else { - ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; + ASSABET_BCR_set(ASSABET_BCR_RS232EN); } - - return ret; } static struct sa1100_port_fns assabet_port_fns __initdata = { - .set_mctrl = assabet_set_mctrl, - .get_mctrl = assabet_get_mctrl, .pm = assabet_uart_pm, }; diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index bc0e0e24ecb7..de79f3502045 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -311,8 +311,6 @@ badge4_uart_pm(struct uart_port *port, u_int state, u_int oldstate) } static struct sa1100_port_fns badge4_port_fns __initdata = { - //.get_mctrl = badge4_get_mctrl, - //.set_mctrl = badge4_set_mctrl, .pm = badge4_uart_pm, }; diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c index 6199e87447ca..e8691921c69a 100644 --- a/arch/arm/mach-sa1100/clock.c +++ b/arch/arm/mach-sa1100/clock.c @@ -2,176 +2,144 @@ /* * linux/arch/arm/mach-sa1100/clock.c */ -#include <linux/module.h> #include <linux/kernel.h> -#include <linux/device.h> -#include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> -#include <linux/string.h> #include <linux/clk.h> -#include <linux/spinlock.h> -#include <linux/mutex.h> -#include <linux/io.h> #include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/spinlock.h> #include <mach/hardware.h> #include <mach/generic.h> -struct clkops { - void (*enable)(struct clk *); - void (*disable)(struct clk *); - unsigned long (*get_rate)(struct clk *); +static const char * const clk_tucr_parents[] = { + "clk32768", "clk3686400", }; -struct clk { - const struct clkops *ops; - unsigned int enabled; -}; - -#define DEFINE_CLK(_name, _ops) \ -struct clk clk_##_name = { \ - .ops = _ops, \ - } - -static DEFINE_SPINLOCK(clocks_lock); - -/* Dummy clk routine to build generic kernel parts that may be using them */ -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - return clk_get_rate(clk); -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - return 0; -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - return 0; -} -EXPORT_SYMBOL(clk_set_parent); +static DEFINE_SPINLOCK(tucr_lock); -struct clk *clk_get_parent(struct clk *clk) +static int clk_gpio27_enable(struct clk_hw *hw) { - return NULL; -} -EXPORT_SYMBOL(clk_get_parent); + unsigned long flags; -static void clk_gpio27_enable(struct clk *clk) -{ /* * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111: * (SA-1110 Developer's Manual, section 9.1.2.1) */ + local_irq_save(flags); GAFR |= GPIO_32_768kHz; GPDR |= GPIO_32_768kHz; - TUCR = TUCR_3_6864MHz; + local_irq_restore(flags); + + return 0; } -static void clk_gpio27_disable(struct clk *clk) +static void clk_gpio27_disable(struct clk_hw *hw) { - TUCR = 0; + unsigned long flags; + + local_irq_save(flags); GPDR &= ~GPIO_32_768kHz; GAFR &= ~GPIO_32_768kHz; + local_irq_restore(flags); } -static void clk_cpu_enable(struct clk *clk) -{ -} +static const struct clk_ops clk_gpio27_ops = { + .enable = clk_gpio27_enable, + .disable = clk_gpio27_disable, +}; -static void clk_cpu_disable(struct clk *clk) -{ -} +static const char * const clk_gpio27_parents[] = { + "tucr-mux", +}; -static unsigned long clk_cpu_get_rate(struct clk *clk) +static const struct clk_init_data clk_gpio27_init_data __initconst = { + .name = "gpio27", + .ops = &clk_gpio27_ops, + .parent_names = clk_gpio27_parents, + .num_parents = ARRAY_SIZE(clk_gpio27_parents), +}; + +/* + * Derived from the table 8-1 in the SA1110 manual, the MPLL appears to + * multiply its input rate by 4 x (4 + PPCR). This calculation gives + * the exact rate. The figures given in the table are the rates rounded + * to 100kHz. Stick with sa11x0_getspeed() for the time being. + */ +static unsigned long clk_mpll_recalc_rate(struct clk_hw *hw, + unsigned long prate) { return sa11x0_getspeed(0) * 1000; } -int clk_enable(struct clk *clk) -{ - unsigned long flags; - - if (clk) { - spin_lock_irqsave(&clocks_lock, flags); - if (clk->enabled++ == 0) - clk->ops->enable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - } - - return 0; -} -EXPORT_SYMBOL(clk_enable); +static const struct clk_ops clk_mpll_ops = { + .recalc_rate = clk_mpll_recalc_rate, +}; -void clk_disable(struct clk *clk) -{ - unsigned long flags; +static const char * const clk_mpll_parents[] = { + "clk3686400", +}; - if (clk) { - WARN_ON(clk->enabled == 0); - spin_lock_irqsave(&clocks_lock, flags); - if (--clk->enabled == 0) - clk->ops->disable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - } -} -EXPORT_SYMBOL(clk_disable); +static const struct clk_init_data clk_mpll_init_data __initconst = { + .name = "mpll", + .ops = &clk_mpll_ops, + .parent_names = clk_mpll_parents, + .num_parents = ARRAY_SIZE(clk_mpll_parents), + .flags = CLK_GET_RATE_NOCACHE | CLK_IS_CRITICAL, +}; -unsigned long clk_get_rate(struct clk *clk) +int __init sa11xx_clk_init(void) { - if (clk && clk->ops && clk->ops->get_rate) - return clk->ops->get_rate(clk); - - return 0; -} -EXPORT_SYMBOL(clk_get_rate); + struct clk_hw *hw; + int ret; -const struct clkops clk_gpio27_ops = { - .enable = clk_gpio27_enable, - .disable = clk_gpio27_disable, -}; + hw = clk_hw_register_fixed_rate(NULL, "clk32768", NULL, 0, 32768); + if (IS_ERR(hw)) + return PTR_ERR(hw); -const struct clkops clk_cpu_ops = { - .enable = clk_cpu_enable, - .disable = clk_cpu_disable, - .get_rate = clk_cpu_get_rate, -}; + clk_hw_register_clkdev(hw, NULL, "sa1100-rtc"); -static DEFINE_CLK(gpio27, &clk_gpio27_ops); + hw = clk_hw_register_fixed_rate(NULL, "clk3686400", NULL, 0, 3686400); + if (IS_ERR(hw)) + return PTR_ERR(hw); -static DEFINE_CLK(cpu, &clk_cpu_ops); + clk_hw_register_clkdev(hw, "OSTIMER0", NULL); -static unsigned long clk_36864_get_rate(struct clk *clk) -{ - return 3686400; -} + hw = kzalloc(sizeof(*hw), GFP_KERNEL); + if (!hw) + return -ENOMEM; + hw->init = &clk_mpll_init_data; + ret = clk_hw_register(NULL, hw); + if (ret) { + kfree(hw); + return ret; + } -static struct clkops clk_36864_ops = { - .enable = clk_cpu_enable, - .disable = clk_cpu_disable, - .get_rate = clk_36864_get_rate, -}; + clk_hw_register_clkdev(hw, NULL, "sa11x0-fb"); + clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia"); + clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.0"); + clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.1"); + clk_hw_register_clkdev(hw, NULL, "1800"); + + hw = clk_hw_register_mux(NULL, "tucr-mux", clk_tucr_parents, + ARRAY_SIZE(clk_tucr_parents), 0, + (void __iomem *)&TUCR, FShft(TUCR_TSEL), + FAlnMsk(TUCR_TSEL), 0, &tucr_lock); + clk_set_rate(hw->clk, 3686400); + + hw = kzalloc(sizeof(*hw), GFP_KERNEL); + if (!hw) + return -ENOMEM; + hw->init = &clk_gpio27_init_data; + ret = clk_hw_register(NULL, hw); + if (ret) { + kfree(hw); + return ret; + } -static DEFINE_CLK(36864, &clk_36864_ops); - -static struct clk_lookup sa11xx_clkregs[] = { - CLKDEV_INIT("sa1111.0", NULL, &clk_gpio27), - CLKDEV_INIT("sa1100-rtc", NULL, NULL), - CLKDEV_INIT("sa11x0-fb", NULL, &clk_cpu), - CLKDEV_INIT("sa11x0-pcmcia", NULL, &clk_cpu), - CLKDEV_INIT("sa11x0-pcmcia.0", NULL, &clk_cpu), - CLKDEV_INIT("sa11x0-pcmcia.1", NULL, &clk_cpu), - /* sa1111 names devices using internal offsets, PCMCIA is at 0x1800 */ - CLKDEV_INIT("1800", NULL, &clk_cpu), - CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864), -}; + clk_hw_register_clkdev(hw, NULL, "sa1111.0"); -int __init sa11xx_clk_init(void) -{ - clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs)); return 0; } diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c index e93e3a1d60d5..d685f03f51f3 100644 --- a/arch/arm/mach-sa1100/h3xxx.c +++ b/arch/arm/mach-sa1100/h3xxx.c @@ -83,57 +83,6 @@ static struct resource h3xxx_flash_resource = /* * H3xxx uart support */ -static struct gpio h3xxx_uart_gpio[] = { - { H3XXX_GPIO_COM_DCD, GPIOF_IN, "COM DCD" }, - { H3XXX_GPIO_COM_CTS, GPIOF_IN, "COM CTS" }, - { H3XXX_GPIO_COM_RTS, GPIOF_OUT_INIT_LOW, "COM RTS" }, -}; - -static bool h3xxx_uart_request_gpios(void) -{ - static bool h3xxx_uart_gpio_ok; - int rc; - - if (h3xxx_uart_gpio_ok) - return true; - - rc = gpio_request_array(h3xxx_uart_gpio, ARRAY_SIZE(h3xxx_uart_gpio)); - if (rc) - pr_err("h3xxx_uart_request_gpios: error %d\n", rc); - else - h3xxx_uart_gpio_ok = true; - - return h3xxx_uart_gpio_ok; -} - -static void h3xxx_uart_set_mctrl(struct uart_port *port, u_int mctrl) -{ - if (port->mapbase == _Ser3UTCR0) { - if (!h3xxx_uart_request_gpios()) - return; - gpio_set_value(H3XXX_GPIO_COM_RTS, !(mctrl & TIOCM_RTS)); - } -} - -static u_int h3xxx_uart_get_mctrl(struct uart_port *port) -{ - u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; - - if (port->mapbase == _Ser3UTCR0) { - if (!h3xxx_uart_request_gpios()) - return ret; - /* - * DCD and CTS bits are inverted in GPLR by RS232 transceiver - */ - if (gpio_get_value(H3XXX_GPIO_COM_DCD)) - ret &= ~TIOCM_CD; - if (gpio_get_value(H3XXX_GPIO_COM_CTS)) - ret &= ~TIOCM_CTS; - } - - return ret; -} - static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate) { if (port->mapbase == _Ser3UTCR0) { @@ -166,12 +115,20 @@ static int h3xxx_uart_set_wake(struct uart_port *port, u_int enable) } static struct sa1100_port_fns h3xxx_port_fns __initdata = { - .set_mctrl = h3xxx_uart_set_mctrl, - .get_mctrl = h3xxx_uart_get_mctrl, .pm = h3xxx_uart_pm, .set_wake = h3xxx_uart_set_wake, }; +static struct gpiod_lookup_table h3xxx_uart3_gpio_table = { + .dev_id = "sa11x0-uart.3", + .table = { + GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_DCD, "dcd", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_CTS, "cts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_RTS, "rts", GPIO_ACTIVE_LOW), + { }, + }, +}; + /* * EGPIO */ @@ -279,6 +236,7 @@ static struct gpiod_lookup_table h3xxx_pcmcia_gpio_table = { void __init h3xxx_mach_init(void) { gpiod_add_lookup_table(&h3xxx_pcmcia_gpio_table); + gpiod_add_lookup_table(&h3xxx_uart3_gpio_table); sa1100_register_uart_fns(&h3xxx_port_fns); sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1); platform_add_devices(h3xxx_devices, ARRAY_SIZE(h3xxx_devices)); diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index 4f4c1bb890e0..6d37d263e0d2 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -45,8 +45,6 @@ /* init funcs */ static void __init hackkit_map_io(void); -static u_int hackkit_get_mctrl(struct uart_port *port); -static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl); static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate); /********************************************************************** @@ -67,8 +65,6 @@ static struct map_desc hackkit_io_desc[] __initdata = { }; static struct sa1100_port_fns hackkit_port_fns __initdata = { - .set_mctrl = hackkit_set_mctrl, - .get_mctrl = hackkit_get_mctrl, .pm = hackkit_uart_pm, }; @@ -101,50 +97,6 @@ static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate) /* TODO: switch on/off uart in powersave mode */ } -/* - * Note! this can be called from IRQ context. - * FIXME: No modem ctrl lines yet. - */ -static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl) -{ -#if 0 - if (port->mapbase == _Ser1UTCR0) { - u_int set = 0, clear = 0; - - if (mctrl & TIOCM_RTS) - set |= PT_CTRL2_RS1_RTS; - else - clear |= PT_CTRL2_RS1_RTS; - - if (mctrl & TIOCM_DTR) - set |= PT_CTRL2_RS1_DTR; - else - clear |= PT_CTRL2_RS1_DTR; - - PTCTRL2_clear(clear); - PTCTRL2_set(set); - } -#endif -} - -static u_int hackkit_get_mctrl(struct uart_port *port) -{ - u_int ret = 0; -#if 0 - u_int irqsr = PT_IRQSR; - - /* need 2 reads to read current value */ - irqsr = PT_IRQSR; - - /* TODO: check IRQ source register for modem/com - status lines and set them correctly. */ -#endif - - ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; - - return ret; -} - static struct mtd_partition hackkit_partitions[] = { { .name = "BLOB", diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index a671e4c994cf..6876bc1e33b4 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -11,7 +11,6 @@ #include <linux/irq.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/serial_core.h> @@ -49,23 +48,8 @@ #define IRR_SA1111 (1 << 2) #define NCR_NGPIO 7 - -#define MDM_CTL0_RTS1 (1 << 0) -#define MDM_CTL0_DTR1 (1 << 1) -#define MDM_CTL0_RTS2 (1 << 2) -#define MDM_CTL0_DTR2 (1 << 3) #define MDM_CTL0_NGPIO 4 - -#define MDM_CTL1_CTS1 (1 << 0) -#define MDM_CTL1_DSR1 (1 << 1) -#define MDM_CTL1_DCD1 (1 << 2) -#define MDM_CTL1_CTS2 (1 << 3) -#define MDM_CTL1_DSR2 (1 << 4) -#define MDM_CTL1_DCD2 (1 << 5) #define MDM_CTL1_NGPIO 6 - -#define AUD_SEL_1341 (1 << 0) -#define AUD_MUTE_1341 (1 << 1) #define AUD_NGPIO 2 extern void sa1110_mb_disable(void); @@ -97,6 +81,30 @@ struct neponset_drvdata { struct gpio_chip *gpio[4]; }; +static struct gpiod_lookup_table neponset_uart1_gpio_table = { + .dev_id = "sa11x0-uart.1", + .table = { + GPIO_LOOKUP("neponset-mdm-ctl0", 2, "rts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl0", 3, "dtr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 3, "cts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 4, "dsr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 5, "dcd", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static struct gpiod_lookup_table neponset_uart3_gpio_table = { + .dev_id = "sa11x0-uart.3", + .table = { + GPIO_LOOKUP("neponset-mdm-ctl0", 0, "rts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl0", 1, "dtr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 0, "cts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 1, "dsr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 2, "dcd", GPIO_ACTIVE_LOW), + { }, + }, +}; + static struct gpiod_lookup_table neponset_pcmcia_table = { .dev_id = "1800", .table = { @@ -124,69 +132,6 @@ void neponset_ncr_frob(unsigned int mask, unsigned int val) } EXPORT_SYMBOL(neponset_ncr_frob); -static void neponset_set_mctrl(struct uart_port *port, u_int mctrl) -{ - struct neponset_drvdata *n = nep; - unsigned long mask, val = 0; - - if (!n) - return; - - if (port->mapbase == _Ser1UTCR0) { - mask = MDM_CTL0_RTS2 | MDM_CTL0_DTR2; - - if (!(mctrl & TIOCM_RTS)) - val |= MDM_CTL0_RTS2; - - if (!(mctrl & TIOCM_DTR)) - val |= MDM_CTL0_DTR2; - } else if (port->mapbase == _Ser3UTCR0) { - mask = MDM_CTL0_RTS1 | MDM_CTL0_DTR1; - - if (!(mctrl & TIOCM_RTS)) - val |= MDM_CTL0_RTS1; - - if (!(mctrl & TIOCM_DTR)) - val |= MDM_CTL0_DTR1; - } - - n->gpio[1]->set_multiple(n->gpio[1], &mask, &val); -} - -static u_int neponset_get_mctrl(struct uart_port *port) -{ - void __iomem *base = nep->base; - u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; - u_int mdm_ctl1; - - if (!base) - return ret; - - mdm_ctl1 = readb_relaxed(base + MDM_CTL_1); - if (port->mapbase == _Ser1UTCR0) { - if (mdm_ctl1 & MDM_CTL1_DCD2) - ret &= ~TIOCM_CD; - if (mdm_ctl1 & MDM_CTL1_CTS2) - ret &= ~TIOCM_CTS; - if (mdm_ctl1 & MDM_CTL1_DSR2) - ret &= ~TIOCM_DSR; - } else if (port->mapbase == _Ser3UTCR0) { - if (mdm_ctl1 & MDM_CTL1_DCD1) - ret &= ~TIOCM_CD; - if (mdm_ctl1 & MDM_CTL1_CTS1) - ret &= ~TIOCM_CTS; - if (mdm_ctl1 & MDM_CTL1_DSR1) - ret &= ~TIOCM_DSR; - } - - return ret; -} - -static struct sa1100_port_fns neponset_port_fns = { - .set_mctrl = neponset_set_mctrl, - .get_mctrl = neponset_get_mctrl, -}; - /* * Install handler for Neponset IRQ. Note that we have to loop here * since the ETHERNET and USAR IRQs are level based, and we need to @@ -388,6 +333,8 @@ static int neponset_probe(struct platform_device *dev) d->base + AUD_CTL, AUD_NGPIO, false, neponset_aud_names); + gpiod_add_lookup_table(&neponset_uart1_gpio_table); + gpiod_add_lookup_table(&neponset_uart3_gpio_table); gpiod_add_lookup_table(&neponset_pcmcia_table); /* @@ -402,8 +349,6 @@ static int neponset_probe(struct platform_device *dev) d->irq_base, d->irq_base + NEP_IRQ_NR - 1); nep = d; - sa1100_register_uart_fns(&neponset_port_fns); - /* Ensure that the memory bus request/grant signals are setup */ sa1110_mb_disable(); @@ -442,6 +387,8 @@ static int neponset_remove(struct platform_device *dev) platform_device_unregister(d->smc91x); gpiod_remove_lookup_table(&neponset_pcmcia_table); + gpiod_remove_lookup_table(&neponset_uart3_gpio_table); + gpiod_remove_lookup_table(&neponset_uart1_gpio_table); irq_set_chained_handler(irq, NULL); irq_free_descs(d->irq_base, NEP_IRQ_NR); diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index eea60b20c6b4..9e4bc1865f84 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -17,6 +17,7 @@ #include <linux/of.h> #include <linux/of_fdt.h> #include <linux/of_platform.h> +#include <linux/psci.h> #include <asm/mach/arch.h> #include <asm/secure_cntvoff.h> #include "common.h" @@ -60,9 +61,24 @@ static unsigned int __init get_extal_freq(void) void __init rcar_gen2_timer_init(void) { + bool need_update = true; void __iomem *base; u32 freq; + /* + * If PSCI is available then most likely we are running on PSCI-enabled + * U-Boot which, we assume, has already taken care of resetting CNTVOFF + * and updating counter module before switching to non-secure mode + * and we don't need to. + */ +#ifdef CONFIG_ARM_PSCI_FW + if (psci_ops.cpu_on) + need_update = false; +#endif + + if (need_update == false) + goto skip_update; + secure_cntvoff_init(); if (of_machine_is_compatible("renesas,r8a7745") || @@ -102,6 +118,7 @@ void __init rcar_gen2_timer_init(void) iounmap(base); +skip_update: of_clk_init(NULL); timer_probe(); } diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig index 05d6b5aada80..57699bd8f107 100644 --- a/arch/arm/mach-stm32/Kconfig +++ b/arch/arm/mach-stm32/Kconfig @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_STM32 - bool "STMicroelectronics STM32 family" if ARM_SINGLE_ARMV7M || ARCH_MULTI_V7 + bool "STMicroelectronics STM32 family" + depends on ARM_SINGLE_ARMV7M || ARCH_MULTI_V7 select ARMV7M_SYSTICK if ARM_SINGLE_ARMV7M select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7 select ARM_GIC if ARCH_MULTI_V7 diff --git a/arch/arm/mach-tango/Makefile b/arch/arm/mach-tango/Makefile index da6c633d3cc0..97cd04508fa1 100644 --- a/arch/arm/mach-tango/Makefile +++ b/arch/arm/mach-tango/Makefile @@ -1,7 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -plus_sec := $(call as-instr,.arch_extension sec,+sec) -AFLAGS_smc.o := -Wa,-march=armv7-a$(plus_sec) - obj-y += setup.o smc.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_SUSPEND) += pm.o diff --git a/arch/arm/mach-tango/smc.S b/arch/arm/mach-tango/smc.S index 361a8dc89804..b1752aaa72bc 100644 --- a/arch/arm/mach-tango/smc.S +++ b/arch/arm/mach-tango/smc.S @@ -1,6 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0 */ #include <linux/linkage.h> + .arch armv7-a + .arch_extension sec ENTRY(tango_smc) push {lr} mov ip, r1 diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c index 0b763239c0f8..c00ea4f77af6 100644 --- a/arch/arm/mach-versatile/versatile_dt.c +++ b/arch/arm/mach-versatile/versatile_dt.c @@ -16,8 +16,6 @@ #include <linux/of_platform.h> #include <linux/slab.h> #include <linux/amba/bus.h> -#include <linux/amba/clcd.h> -#include <linux/platform_data/video-clcd-versatile.h> #include <linux/amba/mmci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -34,14 +32,12 @@ */ #define VERSATILE_SYS_PCICTL_OFFSET 0x44 #define VERSATILE_SYS_MCI_OFFSET 0x48 -#define VERSATILE_SYS_CLCD_OFFSET 0x50 /* * VERSATILE peripheral addresses */ #define VERSATILE_MMCI0_BASE 0x10005000 /* MMC interface */ #define VERSATILE_MMCI1_BASE 0x1000B000 /* MMC Interface */ -#define VERSATILE_CLCD_BASE 0x10120000 /* CLCD */ #define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */ #define VERSATILE_IB2_BASE 0x24000000 /* IB2 module */ #define VERSATILE_IB2_CTL_BASE (VERSATILE_IB2_BASE + 0x03000000) @@ -84,158 +80,6 @@ static struct mmci_platform_data mmc1_plat_data = { }; /* - * CLCD support. - */ -#define SYS_CLCD_MODE_MASK (3 << 0) -#define SYS_CLCD_MODE_888 (0 << 0) -#define SYS_CLCD_MODE_5551 (1 << 0) -#define SYS_CLCD_MODE_565_RLSB (2 << 0) -#define SYS_CLCD_MODE_565_BLSB (3 << 0) -#define SYS_CLCD_NLCDIOON (1 << 2) -#define SYS_CLCD_VDDPOSSWITCH (1 << 3) -#define SYS_CLCD_PWR3V5SWITCH (1 << 4) -#define SYS_CLCD_ID_MASK (0x1f << 8) -#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8) -#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8) -#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8) -#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) -#define SYS_CLCD_ID_VGA (0x1f << 8) - -static bool is_sanyo_2_5_lcd; - -/* - * Disable all display connectors on the interface module. - */ -static void versatile_clcd_disable(struct clcd_fb *fb) -{ - void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET; - u32 val; - - val = readl(sys_clcd); - val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; - writel(val, sys_clcd); - - /* - * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off - */ - if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) { - unsigned long ctrl; - - ctrl = readl(versatile_ib2_ctrl); - ctrl &= ~0x01; - writel(ctrl, versatile_ib2_ctrl); - } -} - -/* - * Enable the relevant connector on the interface module. - */ -static void versatile_clcd_enable(struct clcd_fb *fb) -{ - struct fb_var_screeninfo *var = &fb->fb.var; - void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET; - u32 val; - - val = readl(sys_clcd); - val &= ~SYS_CLCD_MODE_MASK; - - switch (var->green.length) { - case 5: - val |= SYS_CLCD_MODE_5551; - break; - case 6: - if (var->red.offset == 0) - val |= SYS_CLCD_MODE_565_RLSB; - else - val |= SYS_CLCD_MODE_565_BLSB; - break; - case 8: - val |= SYS_CLCD_MODE_888; - break; - } - - /* - * Set the MUX - */ - writel(val, sys_clcd); - - /* - * And now enable the PSUs - */ - val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; - writel(val, sys_clcd); - - /* - * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on - */ - if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) { - unsigned long ctrl; - - ctrl = readl(versatile_ib2_ctrl); - ctrl |= 0x01; - writel(ctrl, versatile_ib2_ctrl); - } -} - -/* - * Detect which LCD panel is connected, and return the appropriate - * clcd_panel structure. Note: we do not have any information on - * the required timings for the 8.4in panel, so we presently assume - * VGA timings. - */ -static int versatile_clcd_setup(struct clcd_fb *fb) -{ - void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET; - const char *panel_name; - u32 val; - - is_sanyo_2_5_lcd = false; - - val = readl(sys_clcd) & SYS_CLCD_ID_MASK; - if (val == SYS_CLCD_ID_SANYO_3_8) - panel_name = "Sanyo TM38QV67A02A"; - else if (val == SYS_CLCD_ID_SANYO_2_5) { - panel_name = "Sanyo QVGA Portrait"; - is_sanyo_2_5_lcd = true; - } else if (val == SYS_CLCD_ID_EPSON_2_2) - panel_name = "Epson L2F50113T00"; - else if (val == SYS_CLCD_ID_VGA) - panel_name = "VGA"; - else { - printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", - val); - panel_name = "VGA"; - } - - fb->panel = versatile_clcd_get_panel(panel_name); - if (!fb->panel) - return -EINVAL; - - return versatile_clcd_setup_dma(fb, SZ_1M); -} - -static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs) -{ - clcdfb_decode(fb, regs); - - /* Always clear BGR for RGB565: we do the routing externally */ - if (fb->fb.var.green.length == 6) - regs->cntl &= ~CNTL_BGR; -} - -static struct clcd_board clcd_plat_data = { - .name = "Versatile", - .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, - .check = clcdfb_check, - .decode = versatile_clcd_decode, - .disable = versatile_clcd_disable, - .enable = versatile_clcd_enable, - .setup = versatile_clcd_setup, - .mmap = versatile_clcd_mmap_dma, - .remove = versatile_clcd_remove_dma, -}; - -/* * Lookup table for attaching a specific name and platform_data pointer to * devices as they get created by of_platform_populate(). Ideally this table * would not exist, but the current clock implementation depends on some devices @@ -244,7 +88,6 @@ static struct clcd_board clcd_plat_data = { struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data), OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", &mmc1_plat_data), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data), {} }; @@ -299,12 +142,12 @@ static void __init versatile_dt_pci_init(void) * driver had it so we will keep it. */ writel(1, versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET); - return; + goto out_put_node; } newprop = kzalloc(sizeof(*newprop), GFP_KERNEL); if (!newprop) - return; + goto out_put_node; newprop->name = kstrdup("status", GFP_KERNEL); newprop->value = kstrdup("disabled", GFP_KERNEL); @@ -312,6 +155,9 @@ static void __init versatile_dt_pci_init(void) of_update_property(np, newprop); pr_info("Not plugged into PCI backplane!\n"); + +out_put_node: + of_node_put(np); } static void __init versatile_dt_init(void) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index cc798115aa9b..820b60a50125 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -709,7 +709,7 @@ config ARM_VIRT_EXT assistance. A compliant bootloader is required in order to make maximum - use of this feature. Refer to Documentation/arm/Booting for + use of this feature. Refer to Documentation/arm/booting.rst for details. config SWP_EMULATE @@ -875,7 +875,7 @@ config KUSER_HELPERS the CPU type fitted to the system. This permits binaries to be run on ARMv4 through to ARMv7 without modification. - See Documentation/arm/kernel_user_helpers.txt for details. + See Documentation/arm/kernel_user_helpers.rst for details. However, the fixed address nature of these helpers can be used by ROP (return orientated programming) authors when creating diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 0e417233dad7..890eeaac3cbb 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -27,28 +27,6 @@ #ifdef CONFIG_MMU -#ifdef CONFIG_KPROBES -static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr) -{ - int ret = 0; - - if (!user_mode(regs)) { - /* kprobe_running() needs smp_processor_id() */ - preempt_disable(); - if (kprobe_running() && kprobe_fault_handler(regs, fsr)) - ret = 1; - preempt_enable(); - } - - return ret; -} -#else -static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr) -{ - return 0; -} -#endif - /* * This is useful to dump out the page tables associated with * 'addr' in mm 'mm'. @@ -265,7 +243,7 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) vm_fault_t fault; unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; - if (notify_page_fault(regs, fsr)) + if (kprobe_page_fault(regs, fsr)) return 0; tsk = current; diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c index 7a79213db3e1..dfbd7c332866 100644 --- a/arch/arm/plat-iop/i2c.c +++ b/arch/arm/plat-iop/i2c.c @@ -16,6 +16,7 @@ #include <linux/tty.h> #include <linux/serial_core.h> #include <linux/io.h> +#include <linux/gpio/machine.h> #include <asm/pgtable.h> #include <asm/page.h> #include <asm/mach/map.h> @@ -34,6 +35,29 @@ #define IRQ_IOP3XX_I2C_1 IRQ_IOP33X_I2C_1 #endif +/* + * Each of the I2C busses have corresponding GPIO lines, and the driver + * need to access these directly to drive the bus low at times. + */ + +struct gpiod_lookup_table iop3xx_i2c0_gpio_lookup = { + .dev_id = "IOP3xx-I2C.0", + .table = { + GPIO_LOOKUP("gpio-iop", 7, "scl", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-iop", 6, "sda", GPIO_ACTIVE_HIGH), + { } + }, +}; + +struct gpiod_lookup_table iop3xx_i2c1_gpio_lookup = { + .dev_id = "IOP3xx-I2C.1", + .table = { + GPIO_LOOKUP("gpio-iop", 5, "scl", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-iop", 4, "sda", GPIO_ACTIVE_HIGH), + { } + }, +}; + static struct resource iop3xx_i2c0_resources[] = { [0] = { .start = 0xfffff680, diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 53da57fba39c..301e572651c0 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -243,7 +243,7 @@ config SAMSUNG_PM_DEBUG depends on DEBUG_EXYNOS_UART || DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART help Say Y here if you want verbose debugging from the PM Suspend and - Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> + Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst> for more information. config S3C_PM_DEBUG_LED_SMDK @@ -268,7 +268,7 @@ config SAMSUNG_PM_CHECK Note, this can take several seconds depending on memory size and CPU speed. - See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> + See <file:Documentation/arm/samsung-s3c24xx/suspend.rst> config SAMSUNG_PM_CHECK_CHUNKSIZE int "S3C2410 PM Suspend CRC Chunksize (KiB)" @@ -280,7 +280,7 @@ config SAMSUNG_PM_CHECK_CHUNKSIZE the CRC data block will take more memory, but will identify any faults with better precision. - See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> + See <file:Documentation/arm/samsung-s3c24xx/suspend.rst> config SAMSUNG_WAKEMASK bool diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 4eac94c1eb6f..9e74c7ff6b04 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -7,7 +7,7 @@ # http://www.arm.linux.org.uk/developer/machines/download.php # # Please do not send patches to this file; it is automatically generated! -# To add an entry into this database, please see Documentation/arm/README, +# To add an entry into this database, please see Documentation/arm/arm.rst, # or visit: # # http://www.arm.linux.org.uk/developer/machines/?action=new diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile index ca85df247775..87b7769214e0 100644 --- a/arch/arm/vdso/Makefile +++ b/arch/arm/vdso/Makefile @@ -13,8 +13,7 @@ ccflags-y += -DDISABLE_BRANCH_PROFILING ldflags-$(CONFIG_CPU_ENDIAN_BE8) := --be8 ldflags-y := -Bsymbolic --no-undefined -soname=linux-vdso.so.1 \ -z max-page-size=4096 -nostdlib -shared $(ldflags-y) \ - $(call ld-option, --hash-style=sysv) \ - $(call ld-option, --build-id) \ + --hash-style=sysv --build-id \ -T obj-$(CONFIG_VDSO) += vdso.o |